diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/net/arcnet/Kconfig | 134 |
1 files changed, 134 insertions, 0 deletions
diff --git a/drivers/net/arcnet/Kconfig b/drivers/net/arcnet/Kconfig new file mode 100644 index 000000000..a51b9dab6 --- /dev/null +++ b/drivers/net/arcnet/Kconfig @@ -0,0 +1,134 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Arcnet configuration +# + +menuconfig ARCNET + depends on NETDEVICES && (ISA || PCI || PCMCIA) + tristate "ARCnet support" + help + If you have a network card of this type, say Y and check out the + (arguably) beautiful poetry in + <file:Documentation/networking/arcnet.rst>. + + You need both this driver, and the driver for the particular ARCnet + chipset of your card. If you don't know, then it's probably a + COM90xx type card, so say Y (or M) to "ARCnet COM90xx chipset + support" below. + + To compile this driver as a module, choose M here. The module will + be called arcnet. + +if ARCNET + +config ARCNET_1201 + tristate "Enable standard ARCNet packet format (RFC 1201)" + help + This allows you to use RFC1201 with your ARCnet card via the virtual + arc0 device. You need to say Y here to communicate with + industry-standard RFC1201 implementations, like the arcether.com + packet driver or most DOS/Windows ODI drivers. Please read the + ARCnet documentation in <file:Documentation/networking/arcnet.rst> + for more information about using arc0. + +config ARCNET_1051 + tristate "Enable old ARCNet packet format (RFC 1051)" + help + This allows you to use RFC1051 with your ARCnet card via the virtual + arc0s device. You only need arc0s if you want to talk to ARCnet + software complying with the "old" standard, specifically, the DOS + arcnet.com packet driver, Amigas running AmiTCP, and some variants + of NetBSD. You do not need to say Y here to communicate with + industry-standard RFC1201 implementations, like the arcether.com + packet driver or most DOS/Windows ODI drivers. RFC1201 is included + automatically as the arc0 device. Please read the ARCnet + documentation in <file:Documentation/networking/arcnet.rst> for more + information about using arc0e and arc0s. + +config ARCNET_RAW + tristate "Enable raw mode packet interface" + help + ARCnet "raw mode" packet encapsulation, no soft headers. Unlikely + to work unless talking to a copy of the same Linux arcnet driver, + but perhaps marginally faster in that case. + +config ARCNET_CAP + tristate "Enable CAP mode packet interface" + help + ARCnet "cap mode" packet encapsulation. Used to get the hardware + acknowledge back to userspace. After the initial protocol byte every + packet is stuffed with an extra 4 byte "cookie" which doesn't + actually appear on the network. After transmit the driver will send + back a packet with protocol byte 0 containing the status of the + transmission: + 0=no hardware acknowledge + 1=excessive nak + 2=transmission accepted by the receiver hardware + + Received packets are also stuffed with the extra 4 bytes but it will + be random data. + + Cap only listens to protocol 1-8. + +config ARCNET_COM90xx + tristate "ARCnet COM90xx (normal) chipset driver" + help + This is the chipset driver for the standard COM90xx cards. If you + have always used the old ARCnet driver without knowing what type of + card you had, this is probably the one for you. + + To compile this driver as a module, choose M here. The module will + be called com90xx. + +config ARCNET_COM90xxIO + tristate "ARCnet COM90xx (IO mapped) chipset driver" + help + This is the chipset driver for the COM90xx cards, using them in + IO-mapped mode instead of memory-mapped mode. This is slower than + the normal driver. Only use it if your card doesn't support shared + memory. + + To compile this driver as a module, choose M here. The module will + be called com90io. + +config ARCNET_RIM_I + tristate "ARCnet COM90xx (RIM I) chipset driver" + help + This is yet another chipset driver for the COM90xx cards, but this + time only using memory-mapped mode, and no IO ports at all. This + driver is completely untested, so if you have one of these cards, + please mail <dwmw2@infradead.org>, especially if it works! + + To compile this driver as a module, choose M here. The module will + be called arc-rimi. + +config ARCNET_COM20020 + tristate "ARCnet COM20020 chipset driver" + depends on LEDS_CLASS + help + This is the driver for the new COM20020 chipset. It supports such + things as promiscuous mode, so packet sniffing is possible, and + extra diagnostic information. + + To compile this driver as a module, choose M here. The module will + be called com20020. + +config ARCNET_COM20020_ISA + tristate "Support for COM20020 on ISA" + depends on ARCNET_COM20020 && ISA + +config ARCNET_COM20020_PCI + tristate "Support for COM20020 on PCI" + depends on ARCNET_COM20020 && PCI + +config ARCNET_COM20020_CS + tristate "COM20020 ARCnet PCMCIA support" + depends on ARCNET_COM20020 && PCMCIA + help + Say Y here if you intend to attach this type of ARCnet PCMCIA card + to your computer. + + To compile this driver as a module, choose M here: the module will be + called com20020_cs. If unsure, say N. + +endif # ARCNET |