summaryrefslogtreecommitdiffstats
path: root/drivers/net/arcnet/capmode.c
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--drivers/net/arcnet/capmode.c268
1 files changed, 268 insertions, 0 deletions
diff --git a/drivers/net/arcnet/capmode.c b/drivers/net/arcnet/capmode.c
new file mode 100644
index 000000000..c09b56784
--- /dev/null
+++ b/drivers/net/arcnet/capmode.c
@@ -0,0 +1,268 @@
+/*
+ * Linux ARCnet driver - "cap mode" packet encapsulation.
+ * It adds sequence numbers to packets for communicating between a user space
+ * application and the driver. After a transmit it sends a packet with protocol
+ * byte 0 back up to the userspace containing the sequence number of the packet
+ * plus the transmit-status on the ArcNet.
+ *
+ * Written 2002-4 by Esben Nielsen, Vestas Wind Systems A/S
+ * Derived from arc-rawmode.c by Avery Pennarun.
+ * arc-rawmode was in turned based on skeleton.c, see below.
+ *
+ * **********************
+ *
+ * The original copyright of skeleton.c was as follows:
+ *
+ * skeleton.c Written 1993 by Donald Becker.
+ * Copyright 1993 United States Government as represented by the
+ * Director, National Security Agency. This software may only be used
+ * and distributed according to the terms of the GNU General Public License as
+ * modified by SRC, incorporated herein by reference.
+ *
+ * **********************
+ *
+ * For more details, see drivers/net/arcnet.c
+ *
+ * **********************
+ */
+
+#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/gfp.h>
+#include <linux/init.h>
+#include <linux/if_arp.h>
+#include <net/arp.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+
+#include "arcdevice.h"
+
+/* packet receiver */
+static void rx(struct net_device *dev, int bufnum,
+ struct archdr *pkthdr, int length)
+{
+ struct arcnet_local *lp = netdev_priv(dev);
+ struct sk_buff *skb;
+ struct archdr *pkt;
+ char *pktbuf, *pkthdrbuf;
+ int ofs;
+
+ arc_printk(D_DURING, dev, "it's a raw(cap) packet (length=%d)\n",
+ length);
+
+ if (length >= MinTU)
+ ofs = 512 - length;
+ else
+ ofs = 256 - length;
+
+ skb = alloc_skb(length + ARC_HDR_SIZE + sizeof(int), GFP_ATOMIC);
+ if (!skb) {
+ dev->stats.rx_dropped++;
+ return;
+ }
+ skb_put(skb, length + ARC_HDR_SIZE + sizeof(int));
+ skb->dev = dev;
+ skb_reset_mac_header(skb);
+ pkt = (struct archdr *)skb_mac_header(skb);
+ skb_pull(skb, ARC_HDR_SIZE);
+
+ /* up to sizeof(pkt->soft) has already been copied from the card
+ * squeeze in an int for the cap encapsulation
+ * use these variables to be sure we count in bytes, not in
+ * sizeof(struct archdr)
+ */
+ pktbuf = (char *)pkt;
+ pkthdrbuf = (char *)pkthdr;
+ memcpy(pktbuf, pkthdrbuf, ARC_HDR_SIZE + sizeof(pkt->soft.cap.proto));
+ memcpy(pktbuf + ARC_HDR_SIZE + sizeof(pkt->soft.cap.proto) + sizeof(int),
+ pkthdrbuf + ARC_HDR_SIZE + sizeof(pkt->soft.cap.proto),
+ sizeof(struct archdr) - ARC_HDR_SIZE - sizeof(pkt->soft.cap.proto));
+
+ if (length > sizeof(pkt->soft))
+ lp->hw.copy_from_card(dev, bufnum, ofs + sizeof(pkt->soft),
+ pkt->soft.raw + sizeof(pkt->soft)
+ + sizeof(int),
+ length - sizeof(pkt->soft));
+
+ if (BUGLVL(D_SKB))
+ arcnet_dump_skb(dev, skb, "rx");
+
+ skb->protocol = cpu_to_be16(ETH_P_ARCNET);
+ netif_rx(skb);
+}
+
+/* Create the ARCnet hard/soft headers for cap mode.
+ * There aren't any soft headers in cap mode - not even the protocol id.
+ */
+static int build_header(struct sk_buff *skb,
+ struct net_device *dev,
+ unsigned short type,
+ uint8_t daddr)
+{
+ int hdr_size = ARC_HDR_SIZE;
+ struct archdr *pkt = skb_push(skb, hdr_size);
+
+ arc_printk(D_PROTO, dev, "Preparing header for cap packet %x.\n",
+ *((int *)&pkt->soft.cap.cookie[0]));
+
+ /* Set the source hardware address.
+ *
+ * This is pretty pointless for most purposes, but it can help in
+ * debugging. ARCnet does not allow us to change the source address in
+ * the actual packet sent)
+ */
+ pkt->hard.source = *dev->dev_addr;
+
+ /* see linux/net/ethernet/eth.c to see where I got the following */
+
+ if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) {
+ /* FIXME: fill in the last byte of the dest ipaddr here to
+ * better comply with RFC1051 in "noarp" mode.
+ */
+ pkt->hard.dest = 0;
+ return hdr_size;
+ }
+ /* otherwise, just fill it in and go! */
+ pkt->hard.dest = daddr;
+
+ return hdr_size; /* success */
+}
+
+static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
+ int bufnum)
+{
+ struct arcnet_local *lp = netdev_priv(dev);
+ struct arc_hardware *hard = &pkt->hard;
+ int ofs;
+
+ /* hard header is not included in packet length */
+ length -= ARC_HDR_SIZE;
+ /* And neither is the cookie field */
+ length -= sizeof(int);
+
+ arc_printk(D_DURING, dev, "prepare_tx: txbufs=%d/%d/%d\n",
+ lp->next_tx, lp->cur_tx, bufnum);
+
+ arc_printk(D_PROTO, dev, "Sending for cap packet %x.\n",
+ *((int *)&pkt->soft.cap.cookie[0]));
+
+ if (length > XMTU) {
+ /* should never happen! other people already check for this. */
+ arc_printk(D_NORMAL, dev, "Bug! prepare_tx with size %d (> %d)\n",
+ length, XMTU);
+ length = XMTU;
+ }
+ if (length > MinTU) {
+ hard->offset[0] = 0;
+ hard->offset[1] = ofs = 512 - length;
+ } else if (length > MTU) {
+ hard->offset[0] = 0;
+ hard->offset[1] = ofs = 512 - length - 3;
+ } else {
+ hard->offset[0] = ofs = 256 - length;
+ }
+
+ arc_printk(D_DURING, dev, "prepare_tx: length=%d ofs=%d\n",
+ length, ofs);
+
+ /* Copy the arcnet-header + the protocol byte down: */
+ lp->hw.copy_to_card(dev, bufnum, 0, hard, ARC_HDR_SIZE);
+ lp->hw.copy_to_card(dev, bufnum, ofs, &pkt->soft.cap.proto,
+ sizeof(pkt->soft.cap.proto));
+
+ /* Skip the extra integer we have written into it as a cookie
+ * but write the rest of the message:
+ */
+ lp->hw.copy_to_card(dev, bufnum, ofs + 1,
+ ((unsigned char *)&pkt->soft.cap.mes), length - 1);
+
+ lp->lastload_dest = hard->dest;
+
+ return 1; /* done */
+}
+
+static int ack_tx(struct net_device *dev, int acked)
+{
+ struct arcnet_local *lp = netdev_priv(dev);
+ struct sk_buff *ackskb;
+ struct archdr *ackpkt;
+ int length = sizeof(struct arc_cap);
+
+ arc_printk(D_DURING, dev, "capmode: ack_tx: protocol: %x: result: %d\n",
+ lp->outgoing.skb->protocol, acked);
+
+ if (BUGLVL(D_SKB))
+ arcnet_dump_skb(dev, lp->outgoing.skb, "ack_tx");
+
+ /* Now alloc a skb to send back up through the layers: */
+ ackskb = alloc_skb(length + ARC_HDR_SIZE, GFP_ATOMIC);
+ if (!ackskb)
+ goto free_outskb;
+
+ skb_put(ackskb, length + ARC_HDR_SIZE);
+ ackskb->dev = dev;
+
+ skb_reset_mac_header(ackskb);
+ ackpkt = (struct archdr *)skb_mac_header(ackskb);
+ /* skb_pull(ackskb, ARC_HDR_SIZE); */
+
+ skb_copy_from_linear_data(lp->outgoing.skb, ackpkt,
+ ARC_HDR_SIZE + sizeof(struct arc_cap));
+ ackpkt->soft.cap.proto = 0; /* using protocol 0 for acknowledge */
+ ackpkt->soft.cap.mes.ack = acked;
+
+ arc_printk(D_PROTO, dev, "Acknowledge for cap packet %x.\n",
+ *((int *)&ackpkt->soft.cap.cookie[0]));
+
+ ackskb->protocol = cpu_to_be16(ETH_P_ARCNET);
+
+ if (BUGLVL(D_SKB))
+ arcnet_dump_skb(dev, ackskb, "ack_tx_recv");
+ netif_rx(ackskb);
+
+free_outskb:
+ dev_kfree_skb_irq(lp->outgoing.skb);
+ lp->outgoing.proto = NULL;
+ /* We are always finished when in this protocol */
+
+ return 0;
+}
+
+static struct ArcProto capmode_proto = {
+ .suffix = 'r',
+ .mtu = XMTU,
+ .rx = rx,
+ .build_header = build_header,
+ .prepare_tx = prepare_tx,
+ .ack_tx = ack_tx
+};
+
+static int __init capmode_module_init(void)
+{
+ int count;
+
+ pr_info("cap mode (`c') encapsulation support loaded\n");
+
+ for (count = 1; count <= 8; count++)
+ if (arc_proto_map[count] == arc_proto_default)
+ arc_proto_map[count] = &capmode_proto;
+
+ /* for cap mode, we only set the bcast proto if there's no better one */
+ if (arc_bcast_proto == arc_proto_default)
+ arc_bcast_proto = &capmode_proto;
+
+ arc_proto_default = &capmode_proto;
+ arc_raw_proto = &capmode_proto;
+
+ return 0;
+}
+
+static void __exit capmode_module_exit(void)
+{
+ arcnet_unregister_proto(&capmode_proto);
+}
+module_init(capmode_module_init);
+module_exit(capmode_module_exit);
+
+MODULE_LICENSE("GPL");