1 files changed, 318 insertions, 0 deletions
diff --git a/drivers/net/pcs/pcs-lynx.c b/drivers/net/pcs/pcs-lynx.c
new file mode 100644
index 000000000..62bb9272d
--- /dev/null
+++ b/drivers/net/pcs/pcs-lynx.c
@@ -0,0 +1,318 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/* Copyright 2020 NXP
+ * Lynx PCS MDIO helpers
+ */
+
+#include <linux/mdio.h>
+#include <linux/phylink.h>
+#include <linux/pcs-lynx.h>
+
+#define SGMII_CLOCK_PERIOD_NS		8 /* PCS is clocked at 125 MHz */
+#define LINK_TIMER_VAL(ns)		((u32)((ns) / SGMII_CLOCK_PERIOD_NS))
+
+#define SGMII_AN_LINK_TIMER_NS		1600000 /* defined by SGMII spec */
+
+#define LINK_TIMER_LO			0x12
+#define LINK_TIMER_HI			0x13
+#define IF_MODE				0x14
+#define IF_MODE_SGMII_EN		BIT(0)
+#define IF_MODE_USE_SGMII_AN		BIT(1)
+#define IF_MODE_SPEED(x)		(((x) << 2) & GENMASK(3, 2))
+#define IF_MODE_SPEED_MSK		GENMASK(3, 2)
+#define IF_MODE_HALF_DUPLEX		BIT(4)
+
+enum sgmii_speed {
+	SGMII_SPEED_10		= 0,
+	SGMII_SPEED_100		= 1,
+	SGMII_SPEED_1000	= 2,
+	SGMII_SPEED_2500	= 2,
+};
+
+#define phylink_pcs_to_lynx(pl_pcs) container_of((pl_pcs), struct lynx_pcs, pcs)
+
+static void lynx_pcs_get_state_usxgmii(struct mdio_device *pcs,
+				       struct phylink_link_state *state)
+{
+	struct mii_bus *bus = pcs->bus;
+	int addr = pcs->addr;
+	int status, lpa;
+
+	status = mdiobus_c45_read(bus, addr, MDIO_MMD_VEND2, MII_BMSR);
+	if (status < 0)
+		return;
+
+	state->link = !!(status & MDIO_STAT1_LSTATUS);
+	state->an_complete = !!(status & MDIO_AN_STAT1_COMPLETE);
+	if (!state->link || !state->an_complete)
+		return;
+
+	lpa = mdiobus_c45_read(bus, addr, MDIO_MMD_VEND2, MII_LPA);
+	if (lpa < 0)
+		return;
+
+	phylink_decode_usxgmii_word(state, lpa);
+}
+
+static void lynx_pcs_get_state_2500basex(struct mdio_device *pcs,
+					 struct phylink_link_state *state)
+{
+	struct mii_bus *bus = pcs->bus;
+	int addr = pcs->addr;
+	int bmsr, lpa;
+
+	bmsr = mdiobus_read(bus, addr, MII_BMSR);
+	lpa = mdiobus_read(bus, addr, MII_LPA);
+	if (bmsr < 0 || lpa < 0) {
+		state->link = false;
+		return;
+	}
+
+	state->link = !!(bmsr & BMSR_LSTATUS);
+	state->an_complete = !!(bmsr & BMSR_ANEGCOMPLETE);
+	if (!state->link)
+		return;
+
+	state->speed = SPEED_2500;
+	state->pause |= MLO_PAUSE_TX | MLO_PAUSE_RX;
+	state->duplex = DUPLEX_FULL;
+}
+
+static void lynx_pcs_get_state(struct phylink_pcs *pcs,
+			       struct phylink_link_state *state)
+{
+	struct lynx_pcs *lynx = phylink_pcs_to_lynx(pcs);
+
+	switch (state->interface) {
+	case PHY_INTERFACE_MODE_SGMII:
+	case PHY_INTERFACE_MODE_QSGMII:
+		phylink_mii_c22_pcs_get_state(lynx->mdio, state);
+		break;
+	case PHY_INTERFACE_MODE_2500BASEX:
+		lynx_pcs_get_state_2500basex(lynx->mdio, state);
+		break;
+	case PHY_INTERFACE_MODE_USXGMII:
+		lynx_pcs_get_state_usxgmii(lynx->mdio, state);
+		break;
+	case PHY_INTERFACE_MODE_10GBASER:
+		phylink_mii_c45_pcs_get_state(lynx->mdio, state);
+		break;
+	default:
+		break;
+	}
+
+	dev_dbg(&lynx->mdio->dev,
+		"mode=%s/%s/%s link=%u an_enabled=%u an_complete=%u\n",
+		phy_modes(state->interface),
+		phy_speed_to_str(state->speed),
+		phy_duplex_to_str(state->duplex),
+		state->link, state->an_enabled, state->an_complete);
+}
+
+static int lynx_pcs_config_sgmii(struct mdio_device *pcs, unsigned int mode,
+				 const unsigned long *advertising)
+{
+	struct mii_bus *bus = pcs->bus;
+	int addr = pcs->addr;
+	u16 if_mode;
+	int err;
+
+	if_mode = IF_MODE_SGMII_EN;
+	if (mode == MLO_AN_INBAND) {
+		u32 link_timer;
+
+		if_mode |= IF_MODE_USE_SGMII_AN;
+
+		/* Adjust link timer for SGMII */
+		link_timer = LINK_TIMER_VAL(SGMII_AN_LINK_TIMER_NS);
+		mdiobus_write(bus, addr, LINK_TIMER_LO, link_timer & 0xffff);
+		mdiobus_write(bus, addr, LINK_TIMER_HI, link_timer >> 16);
+	}
+	err = mdiobus_modify(bus, addr, IF_MODE,
+			     IF_MODE_SGMII_EN | IF_MODE_USE_SGMII_AN,
+			     if_mode);
+	if (err)
+		return err;
+
+	return phylink_mii_c22_pcs_config(pcs, mode, PHY_INTERFACE_MODE_SGMII,
+					 advertising);
+}
+
+static int lynx_pcs_config_usxgmii(struct mdio_device *pcs, unsigned int mode,
+				   const unsigned long *advertising)
+{
+	struct mii_bus *bus = pcs->bus;
+	int addr = pcs->addr;
+
+	if (!phylink_autoneg_inband(mode)) {
+		dev_err(&pcs->dev, "USXGMII only supports in-band AN for now\n");
+		return -EOPNOTSUPP;
+	}
+
+	/* Configure device ability for the USXGMII Replicator */
+	return mdiobus_c45_write(bus, addr, MDIO_MMD_VEND2, MII_ADVERTISE,
+				 MDIO_USXGMII_10G | MDIO_USXGMII_LINK |
+				 MDIO_USXGMII_FULL_DUPLEX |
+				 ADVERTISE_SGMII | ADVERTISE_LPACK);
+}
+
+static int lynx_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
+			   phy_interface_t ifmode,
+			   const unsigned long *advertising,
+			   bool permit)
+{
+	struct lynx_pcs *lynx = phylink_pcs_to_lynx(pcs);
+
+	switch (ifmode) {
+	case PHY_INTERFACE_MODE_SGMII:
+	case PHY_INTERFACE_MODE_QSGMII:
+		return lynx_pcs_config_sgmii(lynx->mdio, mode, advertising);
+	case PHY_INTERFACE_MODE_2500BASEX:
+		if (phylink_autoneg_inband(mode)) {
+			dev_err(&lynx->mdio->dev,
+				"AN not supported on 3.125GHz SerDes lane\n");
+			return -EOPNOTSUPP;
+		}
+		break;
+	case PHY_INTERFACE_MODE_USXGMII:
+		return lynx_pcs_config_usxgmii(lynx->mdio, mode, advertising);
+	case PHY_INTERFACE_MODE_10GBASER:
+		/* Nothing to do here for 10GBASER */
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+static void lynx_pcs_link_up_sgmii(struct mdio_device *pcs, unsigned int mode,
+				   int speed, int duplex)
+{
+	struct mii_bus *bus = pcs->bus;
+	u16 if_mode = 0, sgmii_speed;
+	int addr = pcs->addr;
+
+	/* The PCS needs to be configured manually only
+	 * when not operating on in-band mode
+	 */
+	if (mode == MLO_AN_INBAND)
+		return;
+
+	if (duplex == DUPLEX_HALF)
+		if_mode |= IF_MODE_HALF_DUPLEX;
+
+	switch (speed) {
+	case SPEED_1000:
+		sgmii_speed = SGMII_SPEED_1000;
+		break;
+	case SPEED_100:
+		sgmii_speed = SGMII_SPEED_100;
+		break;
+	case SPEED_10:
+		sgmii_speed = SGMII_SPEED_10;
+		break;
+	case SPEED_UNKNOWN:
+		/* Silently don't do anything */
+		return;
+	default:
+		dev_err(&pcs->dev, "Invalid PCS speed %d\n", speed);
+		return;
+	}
+	if_mode |= IF_MODE_SPEED(sgmii_speed);
+
+	mdiobus_modify(bus, addr, IF_MODE,
+		       IF_MODE_HALF_DUPLEX | IF_MODE_SPEED_MSK,
+		       if_mode);
+}
+
+/* 2500Base-X is SerDes protocol 7 on Felix and 6 on ENETC. It is a SerDes lane
+ * clocked at 3.125 GHz which encodes symbols with 8b/10b and does not have
+ * auto-negotiation of any link parameters. Electrically it is compatible with
+ * a single lane of XAUI.
+ * The hardware reference manual wants to call this mode SGMII, but it isn't
+ * really, since the fundamental features of SGMII:
+ * - Downgrading the link speed by duplicating symbols
+ * - Auto-negotiation
+ * are not there.
+ * The speed is configured at 1000 in the IF_MODE because the clock frequency
+ * is actually given by a PLL configured in the Reset Configuration Word (RCW).
+ * Since there is no difference between fixed speed SGMII w/o AN and 802.3z w/o
+ * AN, we call this PHY interface type 2500Base-X. In case a PHY negotiates a
+ * lower link speed on line side, the system-side interface remains fixed at
+ * 2500 Mbps and we do rate adaptation through pause frames.
+ */
+static void lynx_pcs_link_up_2500basex(struct mdio_device *pcs,
+				       unsigned int mode,
+				       int speed, int duplex)
+{
+	struct mii_bus *bus = pcs->bus;
+	int addr = pcs->addr;
+	u16 if_mode = 0;
+
+	if (mode == MLO_AN_INBAND) {
+		dev_err(&pcs->dev, "AN not supported for 2500BaseX\n");
+		return;
+	}
+
+	if (duplex == DUPLEX_HALF)
+		if_mode |= IF_MODE_HALF_DUPLEX;
+	if_mode |= IF_MODE_SPEED(SGMII_SPEED_2500);
+
+	mdiobus_modify(bus, addr, IF_MODE,
+		       IF_MODE_HALF_DUPLEX | IF_MODE_SPEED_MSK,
+		       if_mode);
+}
+
+static void lynx_pcs_link_up(struct phylink_pcs *pcs, unsigned int mode,
+			     phy_interface_t interface,
+			     int speed, int duplex)
+{
+	struct lynx_pcs *lynx = phylink_pcs_to_lynx(pcs);
+
+	switch (interface) {
+	case PHY_INTERFACE_MODE_SGMII:
+	case PHY_INTERFACE_MODE_QSGMII:
+		lynx_pcs_link_up_sgmii(lynx->mdio, mode, speed, duplex);
+		break;
+	case PHY_INTERFACE_MODE_2500BASEX:
+		lynx_pcs_link_up_2500basex(lynx->mdio, mode, speed, duplex);
+		break;
+	case PHY_INTERFACE_MODE_USXGMII:
+		/* At the moment, only in-band AN is supported for USXGMII
+		 * so nothing to do in link_up
+		 */
+		break;
+	default:
+		break;
+	}
+}
+
+static const struct phylink_pcs_ops lynx_pcs_phylink_ops = {
+	.pcs_get_state = lynx_pcs_get_state,
+	.pcs_config = lynx_pcs_config,
+	.pcs_link_up = lynx_pcs_link_up,
+};
+
+struct lynx_pcs *lynx_pcs_create(struct mdio_device *mdio)
+{
+	struct lynx_pcs *lynx_pcs;
+
+	lynx_pcs = kzalloc(sizeof(*lynx_pcs), GFP_KERNEL);
+	if (!lynx_pcs)
+		return NULL;
+
+	lynx_pcs->mdio = mdio;
+	lynx_pcs->pcs.ops = &lynx_pcs_phylink_ops;
+	lynx_pcs->pcs.poll = true;
+
+	return lynx_pcs;
+}
+EXPORT_SYMBOL(lynx_pcs_create);
+
+void lynx_pcs_destroy(struct lynx_pcs *pcs)
+{
+	kfree(pcs);
+}
+EXPORT_SYMBOL(lynx_pcs_destroy);
+
+MODULE_LICENSE("Dual BSD/GPL");