diff options
Diffstat (limited to 'drivers/net/phy/adin.c')
| -rw-r--r-- | drivers/net/phy/adin.c | 781 |
1 files changed, 781 insertions, 0 deletions
diff --git a/drivers/net/phy/adin.c b/drivers/net/phy/adin.c new file mode 100644 index 000000000..307f0ac12 --- /dev/null +++ b/drivers/net/phy/adin.c @@ -0,0 +1,781 @@ +// SPDX-License-Identifier: GPL-2.0+ +/** + * Driver for Analog Devices Industrial Ethernet PHYs + * + * Copyright 2019 Analog Devices Inc. + */ +#include <linux/kernel.h> +#include <linux/bitfield.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/mii.h> +#include <linux/phy.h> +#include <linux/property.h> + +#define PHY_ID_ADIN1200 0x0283bc20 +#define PHY_ID_ADIN1300 0x0283bc30 + +#define ADIN1300_MII_EXT_REG_PTR 0x0010 +#define ADIN1300_MII_EXT_REG_DATA 0x0011 + +#define ADIN1300_PHY_CTRL1 0x0012 +#define ADIN1300_AUTO_MDI_EN BIT(10) +#define ADIN1300_MAN_MDIX_EN BIT(9) + +#define ADIN1300_RX_ERR_CNT 0x0014 + +#define ADIN1300_PHY_CTRL_STATUS2 0x0015 +#define ADIN1300_NRG_PD_EN BIT(3) +#define ADIN1300_NRG_PD_TX_EN BIT(2) +#define ADIN1300_NRG_PD_STATUS BIT(1) + +#define ADIN1300_PHY_CTRL2 0x0016 +#define ADIN1300_DOWNSPEED_AN_100_EN BIT(11) +#define ADIN1300_DOWNSPEED_AN_10_EN BIT(10) +#define ADIN1300_GROUP_MDIO_EN BIT(6) +#define ADIN1300_DOWNSPEEDS_EN \ + (ADIN1300_DOWNSPEED_AN_100_EN | ADIN1300_DOWNSPEED_AN_10_EN) + +#define ADIN1300_PHY_CTRL3 0x0017 +#define ADIN1300_LINKING_EN BIT(13) +#define ADIN1300_DOWNSPEED_RETRIES_MSK GENMASK(12, 10) + +#define ADIN1300_INT_MASK_REG 0x0018 +#define ADIN1300_INT_MDIO_SYNC_EN BIT(9) +#define ADIN1300_INT_ANEG_STAT_CHNG_EN BIT(8) +#define ADIN1300_INT_ANEG_PAGE_RX_EN BIT(6) +#define ADIN1300_INT_IDLE_ERR_CNT_EN BIT(5) +#define ADIN1300_INT_MAC_FIFO_OU_EN BIT(4) +#define ADIN1300_INT_RX_STAT_CHNG_EN BIT(3) +#define ADIN1300_INT_LINK_STAT_CHNG_EN BIT(2) +#define ADIN1300_INT_SPEED_CHNG_EN BIT(1) +#define ADIN1300_INT_HW_IRQ_EN BIT(0) +#define ADIN1300_INT_MASK_EN \ + (ADIN1300_INT_LINK_STAT_CHNG_EN | ADIN1300_INT_HW_IRQ_EN) +#define ADIN1300_INT_STATUS_REG 0x0019 + +#define ADIN1300_PHY_STATUS1 0x001a +#define ADIN1300_PAIR_01_SWAP BIT(11) + +/* EEE register addresses, accessible via Clause 22 access using + * ADIN1300_MII_EXT_REG_PTR & ADIN1300_MII_EXT_REG_DATA. + * The bit-fields are the same as specified by IEEE for EEE. + */ +#define ADIN1300_EEE_CAP_REG 0x8000 +#define ADIN1300_EEE_ADV_REG 0x8001 +#define ADIN1300_EEE_LPABLE_REG 0x8002 +#define ADIN1300_CLOCK_STOP_REG 0x9400 +#define ADIN1300_LPI_WAKE_ERR_CNT_REG 0xa000 + +#define ADIN1300_GE_SOFT_RESET_REG 0xff0c +#define ADIN1300_GE_SOFT_RESET BIT(0) + +#define ADIN1300_GE_RGMII_CFG_REG 0xff23 +#define ADIN1300_GE_RGMII_RX_MSK GENMASK(8, 6) +#define ADIN1300_GE_RGMII_RX_SEL(x) \ + FIELD_PREP(ADIN1300_GE_RGMII_RX_MSK, x) +#define ADIN1300_GE_RGMII_GTX_MSK GENMASK(5, 3) +#define ADIN1300_GE_RGMII_GTX_SEL(x) \ + FIELD_PREP(ADIN1300_GE_RGMII_GTX_MSK, x) +#define ADIN1300_GE_RGMII_RXID_EN BIT(2) +#define ADIN1300_GE_RGMII_TXID_EN BIT(1) +#define ADIN1300_GE_RGMII_EN BIT(0) + +/* RGMII internal delay settings for rx and tx for ADIN1300 */ +#define ADIN1300_RGMII_1_60_NS 0x0001 +#define ADIN1300_RGMII_1_80_NS 0x0002 +#define ADIN1300_RGMII_2_00_NS 0x0000 +#define ADIN1300_RGMII_2_20_NS 0x0006 +#define ADIN1300_RGMII_2_40_NS 0x0007 + +#define ADIN1300_GE_RMII_CFG_REG 0xff24 +#define ADIN1300_GE_RMII_FIFO_DEPTH_MSK GENMASK(6, 4) +#define ADIN1300_GE_RMII_FIFO_DEPTH_SEL(x) \ + FIELD_PREP(ADIN1300_GE_RMII_FIFO_DEPTH_MSK, x) +#define ADIN1300_GE_RMII_EN BIT(0) + +/* RMII fifo depth values */ +#define ADIN1300_RMII_4_BITS 0x0000 +#define ADIN1300_RMII_8_BITS 0x0001 +#define ADIN1300_RMII_12_BITS 0x0002 +#define ADIN1300_RMII_16_BITS 0x0003 +#define ADIN1300_RMII_20_BITS 0x0004 +#define ADIN1300_RMII_24_BITS 0x0005 + +/** + * struct adin_cfg_reg_map - map a config value to aregister value + * @cfg: value in device configuration + * @reg: value in the register + */ +struct adin_cfg_reg_map { + int cfg; + int reg; +}; + +static const struct adin_cfg_reg_map adin_rgmii_delays[] = { + { 1600, ADIN1300_RGMII_1_60_NS }, + { 1800, ADIN1300_RGMII_1_80_NS }, + { 2000, ADIN1300_RGMII_2_00_NS }, + { 2200, ADIN1300_RGMII_2_20_NS }, + { 2400, ADIN1300_RGMII_2_40_NS }, + { }, +}; + +static const struct adin_cfg_reg_map adin_rmii_fifo_depths[] = { + { 4, ADIN1300_RMII_4_BITS }, + { 8, ADIN1300_RMII_8_BITS }, + { 12, ADIN1300_RMII_12_BITS }, + { 16, ADIN1300_RMII_16_BITS }, + { 20, ADIN1300_RMII_20_BITS }, + { 24, ADIN1300_RMII_24_BITS }, + { }, +}; + +/** + * struct adin_clause45_mmd_map - map to convert Clause 45 regs to Clause 22 + * @devad: device address used in Clause 45 access + * @cl45_regnum: register address defined by Clause 45 + * @adin_regnum: equivalent register address accessible via Clause 22 + */ +struct adin_clause45_mmd_map { + int devad; + u16 cl45_regnum; + u16 adin_regnum; +}; + +static const struct adin_clause45_mmd_map adin_clause45_mmd_map[] = { + { MDIO_MMD_PCS, MDIO_PCS_EEE_ABLE, ADIN1300_EEE_CAP_REG }, + { MDIO_MMD_AN, MDIO_AN_EEE_LPABLE, ADIN1300_EEE_LPABLE_REG }, + { MDIO_MMD_AN, MDIO_AN_EEE_ADV, ADIN1300_EEE_ADV_REG }, + { MDIO_MMD_PCS, MDIO_CTRL1, ADIN1300_CLOCK_STOP_REG }, + { MDIO_MMD_PCS, MDIO_PCS_EEE_WK_ERR, ADIN1300_LPI_WAKE_ERR_CNT_REG }, +}; + +struct adin_hw_stat { + const char *string; + u16 reg1; + u16 reg2; +}; + +static const struct adin_hw_stat adin_hw_stats[] = { + { "total_frames_checked_count", 0x940A, 0x940B }, /* hi + lo */ + { "length_error_frames_count", 0x940C }, + { "alignment_error_frames_count", 0x940D }, + { "symbol_error_count", 0x940E }, + { "oversized_frames_count", 0x940F }, + { "undersized_frames_count", 0x9410 }, + { "odd_nibble_frames_count", 0x9411 }, + { "odd_preamble_packet_count", 0x9412 }, + { "dribble_bits_frames_count", 0x9413 }, + { "false_carrier_events_count", 0x9414 }, +}; + +/** + * struct adin_priv - ADIN PHY driver private data + * @stats: statistic counters for the PHY + */ +struct adin_priv { + u64 stats[ARRAY_SIZE(adin_hw_stats)]; +}; + +static int adin_lookup_reg_value(const struct adin_cfg_reg_map *tbl, int cfg) +{ + size_t i; + + for (i = 0; tbl[i].cfg; i++) { + if (tbl[i].cfg == cfg) + return tbl[i].reg; + } + + return -EINVAL; +} + +static u32 adin_get_reg_value(struct phy_device *phydev, + const char *prop_name, + const struct adin_cfg_reg_map *tbl, + u32 dflt) +{ + struct device *dev = &phydev->mdio.dev; + u32 val; + int rc; + + if (device_property_read_u32(dev, prop_name, &val)) + return dflt; + + rc = adin_lookup_reg_value(tbl, val); + if (rc < 0) { + phydev_warn(phydev, + "Unsupported value %u for %s using default (%u)\n", + val, prop_name, dflt); + return dflt; + } + + return rc; +} + +static int adin_config_rgmii_mode(struct phy_device *phydev) +{ + u32 val; + int reg; + + if (!phy_interface_is_rgmii(phydev)) + return phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, + ADIN1300_GE_RGMII_CFG_REG, + ADIN1300_GE_RGMII_EN); + + reg = phy_read_mmd(phydev, MDIO_MMD_VEND1, ADIN1300_GE_RGMII_CFG_REG); + if (reg < 0) + return reg; + + reg |= ADIN1300_GE_RGMII_EN; + + if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID || + phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) { + reg |= ADIN1300_GE_RGMII_RXID_EN; + + val = adin_get_reg_value(phydev, "adi,rx-internal-delay-ps", + adin_rgmii_delays, + ADIN1300_RGMII_2_00_NS); + reg &= ~ADIN1300_GE_RGMII_RX_MSK; + reg |= ADIN1300_GE_RGMII_RX_SEL(val); + } else { + reg &= ~ADIN1300_GE_RGMII_RXID_EN; + } + + if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID || + phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) { + reg |= ADIN1300_GE_RGMII_TXID_EN; + + val = adin_get_reg_value(phydev, "adi,tx-internal-delay-ps", + adin_rgmii_delays, + ADIN1300_RGMII_2_00_NS); + reg &= ~ADIN1300_GE_RGMII_GTX_MSK; + reg |= ADIN1300_GE_RGMII_GTX_SEL(val); + } else { + reg &= ~ADIN1300_GE_RGMII_TXID_EN; + } + + return phy_write_mmd(phydev, MDIO_MMD_VEND1, + ADIN1300_GE_RGMII_CFG_REG, reg); +} + +static int adin_config_rmii_mode(struct phy_device *phydev) +{ + u32 val; + int reg; + + if (phydev->interface != PHY_INTERFACE_MODE_RMII) + return phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, + ADIN1300_GE_RMII_CFG_REG, + ADIN1300_GE_RMII_EN); + + reg = phy_read_mmd(phydev, MDIO_MMD_VEND1, ADIN1300_GE_RMII_CFG_REG); + if (reg < 0) + return reg; + + reg |= ADIN1300_GE_RMII_EN; + + val = adin_get_reg_value(phydev, "adi,fifo-depth-bits", + adin_rmii_fifo_depths, + ADIN1300_RMII_8_BITS); + + reg &= ~ADIN1300_GE_RMII_FIFO_DEPTH_MSK; + reg |= ADIN1300_GE_RMII_FIFO_DEPTH_SEL(val); + + return phy_write_mmd(phydev, MDIO_MMD_VEND1, + ADIN1300_GE_RMII_CFG_REG, reg); +} + +static int adin_get_downshift(struct phy_device *phydev, u8 *data) +{ + int val, cnt, enable; + + val = phy_read(phydev, ADIN1300_PHY_CTRL2); + if (val < 0) + return val; + + cnt = phy_read(phydev, ADIN1300_PHY_CTRL3); + if (cnt < 0) + return cnt; + + enable = FIELD_GET(ADIN1300_DOWNSPEEDS_EN, val); + cnt = FIELD_GET(ADIN1300_DOWNSPEED_RETRIES_MSK, cnt); + + *data = (enable && cnt) ? cnt : DOWNSHIFT_DEV_DISABLE; + + return 0; +} + +static int adin_set_downshift(struct phy_device *phydev, u8 cnt) +{ + u16 val; + int rc; + + if (cnt == DOWNSHIFT_DEV_DISABLE) + return phy_clear_bits(phydev, ADIN1300_PHY_CTRL2, + ADIN1300_DOWNSPEEDS_EN); + + if (cnt > 7) + return -E2BIG; + + val = FIELD_PREP(ADIN1300_DOWNSPEED_RETRIES_MSK, cnt); + val |= ADIN1300_LINKING_EN; + + rc = phy_modify(phydev, ADIN1300_PHY_CTRL3, + ADIN1300_LINKING_EN | ADIN1300_DOWNSPEED_RETRIES_MSK, + val); + if (rc < 0) + return rc; + + return phy_set_bits(phydev, ADIN1300_PHY_CTRL2, + ADIN1300_DOWNSPEEDS_EN); +} + +static int adin_get_edpd(struct phy_device *phydev, u16 *tx_interval) +{ + int val; + + val = phy_read(phydev, ADIN1300_PHY_CTRL_STATUS2); + if (val < 0) + return val; + + if (ADIN1300_NRG_PD_EN & val) { + if (val & ADIN1300_NRG_PD_TX_EN) + /* default is 1 second */ + *tx_interval = ETHTOOL_PHY_EDPD_DFLT_TX_MSECS; + else + *tx_interval = ETHTOOL_PHY_EDPD_NO_TX; + } else { + *tx_interval = ETHTOOL_PHY_EDPD_DISABLE; + } + + return 0; +} + +static int adin_set_edpd(struct phy_device *phydev, u16 tx_interval) +{ + u16 val; + + if (tx_interval == ETHTOOL_PHY_EDPD_DISABLE) + return phy_clear_bits(phydev, ADIN1300_PHY_CTRL_STATUS2, + (ADIN1300_NRG_PD_EN | ADIN1300_NRG_PD_TX_EN)); + + val = ADIN1300_NRG_PD_EN; + + switch (tx_interval) { + case 1000: /* 1 second */ + fallthrough; + case ETHTOOL_PHY_EDPD_DFLT_TX_MSECS: + val |= ADIN1300_NRG_PD_TX_EN; + fallthrough; + case ETHTOOL_PHY_EDPD_NO_TX: + break; + default: + return -EINVAL; + } + + return phy_modify(phydev, ADIN1300_PHY_CTRL_STATUS2, + (ADIN1300_NRG_PD_EN | ADIN1300_NRG_PD_TX_EN), + val); +} + +static int adin_get_tunable(struct phy_device *phydev, + struct ethtool_tunable *tuna, void *data) +{ + switch (tuna->id) { + case ETHTOOL_PHY_DOWNSHIFT: + return adin_get_downshift(phydev, data); + case ETHTOOL_PHY_EDPD: + return adin_get_edpd(phydev, data); + default: + return -EOPNOTSUPP; + } +} + +static int adin_set_tunable(struct phy_device *phydev, + struct ethtool_tunable *tuna, const void *data) +{ + switch (tuna->id) { + case ETHTOOL_PHY_DOWNSHIFT: + return adin_set_downshift(phydev, *(const u8 *)data); + case ETHTOOL_PHY_EDPD: + return adin_set_edpd(phydev, *(const u16 *)data); + default: + return -EOPNOTSUPP; + } +} + +static int adin_config_init(struct phy_device *phydev) +{ + int rc; + + phydev->mdix_ctrl = ETH_TP_MDI_AUTO; + + rc = adin_config_rgmii_mode(phydev); + if (rc < 0) + return rc; + + rc = adin_config_rmii_mode(phydev); + if (rc < 0) + return rc; + + rc = adin_set_downshift(phydev, 4); + if (rc < 0) + return rc; + + rc = adin_set_edpd(phydev, ETHTOOL_PHY_EDPD_DFLT_TX_MSECS); + if (rc < 0) + return rc; + + phydev_dbg(phydev, "PHY is using mode '%s'\n", + phy_modes(phydev->interface)); + + return 0; +} + +static int adin_phy_ack_intr(struct phy_device *phydev) +{ + /* Clear pending interrupts */ + int rc = phy_read(phydev, ADIN1300_INT_STATUS_REG); + + return rc < 0 ? rc : 0; +} + +static int adin_phy_config_intr(struct phy_device *phydev) +{ + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) + return phy_set_bits(phydev, ADIN1300_INT_MASK_REG, + ADIN1300_INT_MASK_EN); + + return phy_clear_bits(phydev, ADIN1300_INT_MASK_REG, + ADIN1300_INT_MASK_EN); +} + +static int adin_cl45_to_adin_reg(struct phy_device *phydev, int devad, + u16 cl45_regnum) +{ + const struct adin_clause45_mmd_map *m; + int i; + + if (devad == MDIO_MMD_VEND1) + return cl45_regnum; + + for (i = 0; i < ARRAY_SIZE(adin_clause45_mmd_map); i++) { + m = &adin_clause45_mmd_map[i]; + if (m->devad == devad && m->cl45_regnum == cl45_regnum) + return m->adin_regnum; + } + + phydev_err(phydev, + "No translation available for devad: %d reg: %04x\n", + devad, cl45_regnum); + + return -EINVAL; +} + +static int adin_read_mmd(struct phy_device *phydev, int devad, u16 regnum) +{ + struct mii_bus *bus = phydev->mdio.bus; + int phy_addr = phydev->mdio.addr; + int adin_regnum; + int err; + + adin_regnum = adin_cl45_to_adin_reg(phydev, devad, regnum); + if (adin_regnum < 0) + return adin_regnum; + + err = __mdiobus_write(bus, phy_addr, ADIN1300_MII_EXT_REG_PTR, + adin_regnum); + if (err) + return err; + + return __mdiobus_read(bus, phy_addr, ADIN1300_MII_EXT_REG_DATA); +} + +static int adin_write_mmd(struct phy_device *phydev, int devad, u16 regnum, + u16 val) +{ + struct mii_bus *bus = phydev->mdio.bus; + int phy_addr = phydev->mdio.addr; + int adin_regnum; + int err; + + adin_regnum = adin_cl45_to_adin_reg(phydev, devad, regnum); + if (adin_regnum < 0) + return adin_regnum; + + err = __mdiobus_write(bus, phy_addr, ADIN1300_MII_EXT_REG_PTR, + adin_regnum); + if (err) + return err; + + return __mdiobus_write(bus, phy_addr, ADIN1300_MII_EXT_REG_DATA, val); +} + +static int adin_config_mdix(struct phy_device *phydev) +{ + bool auto_en, mdix_en; + int reg; + + mdix_en = false; + auto_en = false; + switch (phydev->mdix_ctrl) { + case ETH_TP_MDI: + break; + case ETH_TP_MDI_X: + mdix_en = true; + break; + case ETH_TP_MDI_AUTO: + auto_en = true; + break; + default: + return -EINVAL; + } + + reg = phy_read(phydev, ADIN1300_PHY_CTRL1); + if (reg < 0) + return reg; + + if (mdix_en) + reg |= ADIN1300_MAN_MDIX_EN; + else + reg &= ~ADIN1300_MAN_MDIX_EN; + + if (auto_en) + reg |= ADIN1300_AUTO_MDI_EN; + else + reg &= ~ADIN1300_AUTO_MDI_EN; + + return phy_write(phydev, ADIN1300_PHY_CTRL1, reg); +} + +static int adin_config_aneg(struct phy_device *phydev) +{ + int ret; + + ret = adin_config_mdix(phydev); + if (ret) + return ret; + + return genphy_config_aneg(phydev); +} + +static int adin_mdix_update(struct phy_device *phydev) +{ + bool auto_en, mdix_en; + bool swapped; + int reg; + + reg = phy_read(phydev, ADIN1300_PHY_CTRL1); + if (reg < 0) + return reg; + + auto_en = !!(reg & ADIN1300_AUTO_MDI_EN); + mdix_en = !!(reg & ADIN1300_MAN_MDIX_EN); + + /* If MDI/MDIX is forced, just read it from the control reg */ + if (!auto_en) { + if (mdix_en) + phydev->mdix = ETH_TP_MDI_X; + else + phydev->mdix = ETH_TP_MDI; + return 0; + } + + /** + * Otherwise, we need to deduce it from the PHY status2 reg. + * When Auto-MDI is enabled, the ADIN1300_MAN_MDIX_EN bit implies + * a preference for MDIX when it is set. + */ + reg = phy_read(phydev, ADIN1300_PHY_STATUS1); + if (reg < 0) + return reg; + + swapped = !!(reg & ADIN1300_PAIR_01_SWAP); + + if (mdix_en != swapped) + phydev->mdix = ETH_TP_MDI_X; + else + phydev->mdix = ETH_TP_MDI; + + return 0; +} + +static int adin_read_status(struct phy_device *phydev) +{ + int ret; + + ret = adin_mdix_update(phydev); + if (ret < 0) + return ret; + + return genphy_read_status(phydev); +} + +static int adin_soft_reset(struct phy_device *phydev) +{ + int rc; + + /* The reset bit is self-clearing, set it and wait */ + rc = phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, + ADIN1300_GE_SOFT_RESET_REG, + ADIN1300_GE_SOFT_RESET); + if (rc < 0) + return rc; + + msleep(20); + + /* If we get a read error something may be wrong */ + rc = phy_read_mmd(phydev, MDIO_MMD_VEND1, + ADIN1300_GE_SOFT_RESET_REG); + + return rc < 0 ? rc : 0; +} + +static int adin_get_sset_count(struct phy_device *phydev) +{ + return ARRAY_SIZE(adin_hw_stats); +} + +static void adin_get_strings(struct phy_device *phydev, u8 *data) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(adin_hw_stats); i++) { + strlcpy(&data[i * ETH_GSTRING_LEN], + adin_hw_stats[i].string, ETH_GSTRING_LEN); + } +} + +static int adin_read_mmd_stat_regs(struct phy_device *phydev, + const struct adin_hw_stat *stat, + u32 *val) +{ + int ret; + + ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, stat->reg1); + if (ret < 0) + return ret; + + *val = (ret & 0xffff); + + if (stat->reg2 == 0) + return 0; + + ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, stat->reg2); + if (ret < 0) + return ret; + + *val <<= 16; + *val |= (ret & 0xffff); + + return 0; +} + +static u64 adin_get_stat(struct phy_device *phydev, int i) +{ + const struct adin_hw_stat *stat = &adin_hw_stats[i]; + struct adin_priv *priv = phydev->priv; + u32 val; + int ret; + + if (stat->reg1 > 0x1f) { + ret = adin_read_mmd_stat_regs(phydev, stat, &val); + if (ret < 0) + return (u64)(~0); + } else { + ret = phy_read(phydev, stat->reg1); + if (ret < 0) + return (u64)(~0); + val = (ret & 0xffff); + } + + priv->stats[i] += val; + + return priv->stats[i]; +} + +static void adin_get_stats(struct phy_device *phydev, + struct ethtool_stats *stats, u64 *data) +{ + int i, rc; + + /* latch copies of all the frame-checker counters */ + rc = phy_read(phydev, ADIN1300_RX_ERR_CNT); + if (rc < 0) + return; + + for (i = 0; i < ARRAY_SIZE(adin_hw_stats); i++) + data[i] = adin_get_stat(phydev, i); +} + +static int adin_probe(struct phy_device *phydev) +{ + struct device *dev = &phydev->mdio.dev; + struct adin_priv *priv; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + phydev->priv = priv; + + return 0; +} + +static struct phy_driver adin_driver[] = { + { + PHY_ID_MATCH_MODEL(PHY_ID_ADIN1200), + .name = "ADIN1200", + .probe = adin_probe, + .config_init = adin_config_init, + .soft_reset = adin_soft_reset, + .config_aneg = adin_config_aneg, + .read_status = adin_read_status, + .get_tunable = adin_get_tunable, + .set_tunable = adin_set_tunable, + .ack_interrupt = adin_phy_ack_intr, + .config_intr = adin_phy_config_intr, + .get_sset_count = adin_get_sset_count, + .get_strings = adin_get_strings, + .get_stats = adin_get_stats, + .resume = genphy_resume, + .suspend = genphy_suspend, + .read_mmd = adin_read_mmd, + .write_mmd = adin_write_mmd, + }, + { + PHY_ID_MATCH_MODEL(PHY_ID_ADIN1300), + .name = "ADIN1300", + .probe = adin_probe, + .config_init = adin_config_init, + .soft_reset = adin_soft_reset, + .config_aneg = adin_config_aneg, + .read_status = adin_read_status, + .get_tunable = adin_get_tunable, + .set_tunable = adin_set_tunable, + .ack_interrupt = adin_phy_ack_intr, + .config_intr = adin_phy_config_intr, + .get_sset_count = adin_get_sset_count, + .get_strings = adin_get_strings, + .get_stats = adin_get_stats, + .resume = genphy_resume, + .suspend = genphy_suspend, + .read_mmd = adin_read_mmd, + .write_mmd = adin_write_mmd, + }, +}; + +module_phy_driver(adin_driver); + +static struct mdio_device_id __maybe_unused adin_tbl[] = { + { PHY_ID_MATCH_MODEL(PHY_ID_ADIN1200) }, + { PHY_ID_MATCH_MODEL(PHY_ID_ADIN1300) }, + { } +}; + +MODULE_DEVICE_TABLE(mdio, adin_tbl); +MODULE_DESCRIPTION("Analog Devices Industrial Ethernet PHY driver"); +MODULE_LICENSE("GPL"); |