summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath/ath10k/pci.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/ath/ath10k/pci.h')
-rw-r--r--drivers/net/wireless/ath/ath10k/pci.h260
1 files changed, 260 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath10k/pci.h b/drivers/net/wireless/ath/ath10k/pci.h
new file mode 100644
index 000000000..862d0901c
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/pci.h
@@ -0,0 +1,260 @@
+/* SPDX-License-Identifier: ISC */
+/*
+ * Copyright (c) 2005-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2017 Qualcomm Atheros, Inc.
+ */
+
+#ifndef _PCI_H_
+#define _PCI_H_
+
+#include <linux/interrupt.h>
+#include <linux/mutex.h>
+
+#include "hw.h"
+#include "ce.h"
+#include "ahb.h"
+
+/*
+ * maximum number of bytes that can be
+ * handled atomically by DiagRead/DiagWrite
+ */
+#define DIAG_TRANSFER_LIMIT 2048
+
+struct bmi_xfer {
+ bool tx_done;
+ bool rx_done;
+ bool wait_for_resp;
+ u32 resp_len;
+};
+
+/*
+ * PCI-specific Target state
+ *
+ * NOTE: Structure is shared between Host software and Target firmware!
+ *
+ * Much of this may be of interest to the Host so
+ * HOST_INTEREST->hi_interconnect_state points here
+ * (and all members are 32-bit quantities in order to
+ * facilitate Host access). In particular, Host software is
+ * required to initialize pipe_cfg_addr and svc_to_pipe_map.
+ */
+struct pcie_state {
+ /* Pipe configuration Target address */
+ /* NB: ce_pipe_config[CE_COUNT] */
+ u32 pipe_cfg_addr;
+
+ /* Service to pipe map Target address */
+ /* NB: service_to_pipe[PIPE_TO_CE_MAP_CN] */
+ u32 svc_to_pipe_map;
+
+ /* number of MSI interrupts requested */
+ u32 msi_requested;
+
+ /* number of MSI interrupts granted */
+ u32 msi_granted;
+
+ /* Message Signalled Interrupt address */
+ u32 msi_addr;
+
+ /* Base data */
+ u32 msi_data;
+
+ /*
+ * Data for firmware interrupt;
+ * MSI data for other interrupts are
+ * in various SoC registers
+ */
+ u32 msi_fw_intr_data;
+
+ /* PCIE_PWR_METHOD_* */
+ u32 power_mgmt_method;
+
+ /* PCIE_CONFIG_FLAG_* */
+ u32 config_flags;
+};
+
+/* PCIE_CONFIG_FLAG definitions */
+#define PCIE_CONFIG_FLAG_ENABLE_L1 0x0000001
+
+/* Per-pipe state. */
+struct ath10k_pci_pipe {
+ /* Handle of underlying Copy Engine */
+ struct ath10k_ce_pipe *ce_hdl;
+
+ /* Our pipe number; facilitiates use of pipe_info ptrs. */
+ u8 pipe_num;
+
+ /* Convenience back pointer to hif_ce_state. */
+ struct ath10k *hif_ce_state;
+
+ size_t buf_sz;
+
+ /* protects compl_free and num_send_allowed */
+ spinlock_t pipe_lock;
+};
+
+struct ath10k_pci_supp_chip {
+ u32 dev_id;
+ u32 rev_id;
+};
+
+enum ath10k_pci_irq_mode {
+ ATH10K_PCI_IRQ_AUTO = 0,
+ ATH10K_PCI_IRQ_LEGACY = 1,
+ ATH10K_PCI_IRQ_MSI = 2,
+};
+
+struct ath10k_pci {
+ struct pci_dev *pdev;
+ struct device *dev;
+ struct ath10k *ar;
+ void __iomem *mem;
+ size_t mem_len;
+
+ /* Operating interrupt mode */
+ enum ath10k_pci_irq_mode oper_irq_mode;
+
+ struct ath10k_pci_pipe pipe_info[CE_COUNT_MAX];
+
+ /* Copy Engine used for Diagnostic Accesses */
+ struct ath10k_ce_pipe *ce_diag;
+ /* For protecting ce_diag */
+ struct mutex ce_diag_mutex;
+
+ struct work_struct dump_work;
+
+ struct ath10k_ce ce;
+ struct timer_list rx_post_retry;
+
+ /* Due to HW quirks it is recommended to disable ASPM during device
+ * bootup. To do that the original PCI-E Link Control is stored before
+ * device bootup is executed and re-programmed later.
+ */
+ u16 link_ctl;
+
+ /* Protects ps_awake and ps_wake_refcount */
+ spinlock_t ps_lock;
+
+ /* The device has a special powersave-oriented register. When device is
+ * considered asleep it drains less power and driver is forbidden from
+ * accessing most MMIO registers. If host were to access them without
+ * waking up the device might scribble over host memory or return
+ * 0xdeadbeef readouts.
+ */
+ unsigned long ps_wake_refcount;
+
+ /* Waking up takes some time (up to 2ms in some cases) so it can be bad
+ * for latency. To mitigate this the device isn't immediately allowed
+ * to sleep after all references are undone - instead there's a grace
+ * period after which the powersave register is updated unless some
+ * activity to/from device happened in the meantime.
+ *
+ * Also see comments on ATH10K_PCI_SLEEP_GRACE_PERIOD_MSEC.
+ */
+ struct timer_list ps_timer;
+
+ /* MMIO registers are used to communicate with the device. With
+ * intensive traffic accessing powersave register would be a bit
+ * wasteful overhead and would needlessly stall CPU. It is far more
+ * efficient to rely on a variable in RAM and update it only upon
+ * powersave register state changes.
+ */
+ bool ps_awake;
+
+ /* pci power save, disable for QCA988X and QCA99X0.
+ * Writing 'false' to this variable avoids frequent locking
+ * on MMIO read/write.
+ */
+ bool pci_ps;
+
+ /* Chip specific pci reset routine used to do a safe reset */
+ int (*pci_soft_reset)(struct ath10k *ar);
+
+ /* Chip specific pci full reset function */
+ int (*pci_hard_reset)(struct ath10k *ar);
+
+ /* chip specific methods for converting target CPU virtual address
+ * space to CE address space
+ */
+ u32 (*targ_cpu_to_ce_addr)(struct ath10k *ar, u32 addr);
+
+ struct ce_attr *attr;
+ struct ce_pipe_config *pipe_config;
+ struct ce_service_to_pipe *serv_to_pipe;
+
+ /* Keep this entry in the last, memory for struct ath10k_ahb is
+ * allocated (ahb support enabled case) in the continuation of
+ * this struct.
+ */
+ struct ath10k_ahb ahb[];
+
+};
+
+static inline struct ath10k_pci *ath10k_pci_priv(struct ath10k *ar)
+{
+ return (struct ath10k_pci *)ar->drv_priv;
+}
+
+#define ATH10K_PCI_RX_POST_RETRY_MS 50
+#define ATH_PCI_RESET_WAIT_MAX 10 /* ms */
+#define PCIE_WAKE_TIMEOUT 30000 /* 30ms */
+#define PCIE_WAKE_LATE_US 10000 /* 10ms */
+
+#define BAR_NUM 0
+
+#define CDC_WAR_MAGIC_STR 0xceef0000
+#define CDC_WAR_DATA_CE 4
+
+/* Wait up to this many Ms for a Diagnostic Access CE operation to complete */
+#define DIAG_ACCESS_CE_TIMEOUT_US 10000 /* 10 ms */
+#define DIAG_ACCESS_CE_WAIT_US 50
+
+void ath10k_pci_write32(struct ath10k *ar, u32 offset, u32 value);
+void ath10k_pci_soc_write32(struct ath10k *ar, u32 addr, u32 val);
+void ath10k_pci_reg_write32(struct ath10k *ar, u32 addr, u32 val);
+
+u32 ath10k_pci_read32(struct ath10k *ar, u32 offset);
+u32 ath10k_pci_soc_read32(struct ath10k *ar, u32 addr);
+u32 ath10k_pci_reg_read32(struct ath10k *ar, u32 addr);
+
+int ath10k_pci_hif_tx_sg(struct ath10k *ar, u8 pipe_id,
+ struct ath10k_hif_sg_item *items, int n_items);
+int ath10k_pci_hif_diag_read(struct ath10k *ar, u32 address, void *buf,
+ size_t buf_len);
+int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address,
+ const void *data, int nbytes);
+int ath10k_pci_hif_exchange_bmi_msg(struct ath10k *ar, void *req, u32 req_len,
+ void *resp, u32 *resp_len);
+int ath10k_pci_hif_map_service_to_pipe(struct ath10k *ar, u16 service_id,
+ u8 *ul_pipe, u8 *dl_pipe);
+void ath10k_pci_hif_get_default_pipe(struct ath10k *ar, u8 *ul_pipe,
+ u8 *dl_pipe);
+void ath10k_pci_hif_send_complete_check(struct ath10k *ar, u8 pipe,
+ int force);
+u16 ath10k_pci_hif_get_free_queue_number(struct ath10k *ar, u8 pipe);
+void ath10k_pci_hif_power_down(struct ath10k *ar);
+int ath10k_pci_alloc_pipes(struct ath10k *ar);
+void ath10k_pci_free_pipes(struct ath10k *ar);
+void ath10k_pci_free_pipes(struct ath10k *ar);
+void ath10k_pci_rx_replenish_retry(struct timer_list *t);
+void ath10k_pci_ce_deinit(struct ath10k *ar);
+void ath10k_pci_init_napi(struct ath10k *ar);
+int ath10k_pci_init_pipes(struct ath10k *ar);
+int ath10k_pci_init_config(struct ath10k *ar);
+void ath10k_pci_rx_post(struct ath10k *ar);
+void ath10k_pci_flush(struct ath10k *ar);
+void ath10k_pci_enable_legacy_irq(struct ath10k *ar);
+bool ath10k_pci_irq_pending(struct ath10k *ar);
+void ath10k_pci_disable_and_clear_legacy_irq(struct ath10k *ar);
+void ath10k_pci_irq_msi_fw_mask(struct ath10k *ar);
+int ath10k_pci_wait_for_target_init(struct ath10k *ar);
+int ath10k_pci_setup_resource(struct ath10k *ar);
+void ath10k_pci_release_resource(struct ath10k *ar);
+
+/* QCA6174 is known to have Tx/Rx issues when SOC_WAKE register is poked too
+ * frequently. To avoid this put SoC to sleep after a very conservative grace
+ * period. Adjust with great care.
+ */
+#define ATH10K_PCI_SLEEP_GRACE_PERIOD_MSEC 60
+
+#endif /* _PCI_H_ */