diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath10k/thermal.c')
| -rw-r--r-- | drivers/net/wireless/ath/ath10k/thermal.c | 219 |
1 files changed, 219 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath10k/thermal.c b/drivers/net/wireless/ath/ath10k/thermal.c new file mode 100644 index 000000000..36c9a1364 --- /dev/null +++ b/drivers/net/wireless/ath/ath10k/thermal.c @@ -0,0 +1,219 @@ +// SPDX-License-Identifier: ISC +/* + * Copyright (c) 2014-2015 Qualcomm Atheros, Inc. + */ + +#include <linux/device.h> +#include <linux/sysfs.h> +#include <linux/thermal.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include "core.h" +#include "debug.h" +#include "wmi-ops.h" + +static int +ath10k_thermal_get_max_throttle_state(struct thermal_cooling_device *cdev, + unsigned long *state) +{ + *state = ATH10K_THERMAL_THROTTLE_MAX; + + return 0; +} + +static int +ath10k_thermal_get_cur_throttle_state(struct thermal_cooling_device *cdev, + unsigned long *state) +{ + struct ath10k *ar = cdev->devdata; + + mutex_lock(&ar->conf_mutex); + *state = ar->thermal.throttle_state; + mutex_unlock(&ar->conf_mutex); + + return 0; +} + +static int +ath10k_thermal_set_cur_throttle_state(struct thermal_cooling_device *cdev, + unsigned long throttle_state) +{ + struct ath10k *ar = cdev->devdata; + + if (throttle_state > ATH10K_THERMAL_THROTTLE_MAX) { + ath10k_warn(ar, "throttle state %ld is exceeding the limit %d\n", + throttle_state, ATH10K_THERMAL_THROTTLE_MAX); + return -EINVAL; + } + mutex_lock(&ar->conf_mutex); + ar->thermal.throttle_state = throttle_state; + ath10k_thermal_set_throttling(ar); + mutex_unlock(&ar->conf_mutex); + return 0; +} + +static const struct thermal_cooling_device_ops ath10k_thermal_ops = { + .get_max_state = ath10k_thermal_get_max_throttle_state, + .get_cur_state = ath10k_thermal_get_cur_throttle_state, + .set_cur_state = ath10k_thermal_set_cur_throttle_state, +}; + +static ssize_t ath10k_thermal_show_temp(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct ath10k *ar = dev_get_drvdata(dev); + int ret, temperature; + unsigned long time_left; + + mutex_lock(&ar->conf_mutex); + + /* Can't get temperature when the card is off */ + if (ar->state != ATH10K_STATE_ON) { + ret = -ENETDOWN; + goto out; + } + + reinit_completion(&ar->thermal.wmi_sync); + ret = ath10k_wmi_pdev_get_temperature(ar); + if (ret) { + ath10k_warn(ar, "failed to read temperature %d\n", ret); + goto out; + } + + if (test_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags)) { + ret = -ESHUTDOWN; + goto out; + } + + time_left = wait_for_completion_timeout(&ar->thermal.wmi_sync, + ATH10K_THERMAL_SYNC_TIMEOUT_HZ); + if (!time_left) { + ath10k_warn(ar, "failed to synchronize thermal read\n"); + ret = -ETIMEDOUT; + goto out; + } + + spin_lock_bh(&ar->data_lock); + temperature = ar->thermal.temperature; + spin_unlock_bh(&ar->data_lock); + + /* display in millidegree celcius */ + ret = snprintf(buf, PAGE_SIZE, "%d\n", temperature * 1000); +out: + mutex_unlock(&ar->conf_mutex); + return ret; +} + +void ath10k_thermal_event_temperature(struct ath10k *ar, int temperature) +{ + spin_lock_bh(&ar->data_lock); + ar->thermal.temperature = temperature; + spin_unlock_bh(&ar->data_lock); + complete(&ar->thermal.wmi_sync); +} + +static SENSOR_DEVICE_ATTR(temp1_input, 0444, ath10k_thermal_show_temp, + NULL, 0); + +static struct attribute *ath10k_hwmon_attrs[] = { + &sensor_dev_attr_temp1_input.dev_attr.attr, + NULL, +}; +ATTRIBUTE_GROUPS(ath10k_hwmon); + +void ath10k_thermal_set_throttling(struct ath10k *ar) +{ + u32 period, duration, enabled; + int ret; + + lockdep_assert_held(&ar->conf_mutex); + + if (!test_bit(WMI_SERVICE_THERM_THROT, ar->wmi.svc_map)) + return; + + if (!ar->wmi.ops->gen_pdev_set_quiet_mode) + return; + + if (ar->state != ATH10K_STATE_ON) + return; + + period = ar->thermal.quiet_period; + duration = (period * ar->thermal.throttle_state) / 100; + enabled = duration ? 1 : 0; + + ret = ath10k_wmi_pdev_set_quiet_mode(ar, period, duration, + ATH10K_QUIET_START_OFFSET, + enabled); + if (ret) { + ath10k_warn(ar, "failed to set quiet mode period %u duarion %u enabled %u ret %d\n", + period, duration, enabled, ret); + } +} + +int ath10k_thermal_register(struct ath10k *ar) +{ + struct thermal_cooling_device *cdev; + struct device *hwmon_dev; + int ret; + + if (!test_bit(WMI_SERVICE_THERM_THROT, ar->wmi.svc_map)) + return 0; + + cdev = thermal_cooling_device_register("ath10k_thermal", ar, + &ath10k_thermal_ops); + + if (IS_ERR(cdev)) { + ath10k_err(ar, "failed to setup thermal device result: %ld\n", + PTR_ERR(cdev)); + return -EINVAL; + } + + ret = sysfs_create_link(&ar->dev->kobj, &cdev->device.kobj, + "cooling_device"); + if (ret) { + ath10k_err(ar, "failed to create cooling device symlink\n"); + goto err_cooling_destroy; + } + + ar->thermal.cdev = cdev; + ar->thermal.quiet_period = ATH10K_QUIET_PERIOD_DEFAULT; + + /* Do not register hwmon device when temperature reading is not + * supported by firmware + */ + if (!(ar->wmi.ops->gen_pdev_get_temperature)) + return 0; + + /* Avoid linking error on devm_hwmon_device_register_with_groups, I + * guess linux/hwmon.h is missing proper stubs. + */ + if (!IS_REACHABLE(CONFIG_HWMON)) + return 0; + + hwmon_dev = devm_hwmon_device_register_with_groups(ar->dev, + "ath10k_hwmon", ar, + ath10k_hwmon_groups); + if (IS_ERR(hwmon_dev)) { + ath10k_err(ar, "failed to register hwmon device: %ld\n", + PTR_ERR(hwmon_dev)); + ret = -EINVAL; + goto err_remove_link; + } + return 0; + +err_remove_link: + sysfs_remove_link(&ar->dev->kobj, "cooling_device"); +err_cooling_destroy: + thermal_cooling_device_unregister(cdev); + return ret; +} + +void ath10k_thermal_unregister(struct ath10k *ar) +{ + if (!test_bit(WMI_SERVICE_THERM_THROT, ar->wmi.svc_map)) + return; + + sysfs_remove_link(&ar->dev->kobj, "cooling_device"); + thermal_cooling_device_unregister(ar->thermal.cdev); +} |