diff options
Diffstat (limited to 'drivers/net/wireless/realtek/rtl818x/rtl8180')
| -rw-r--r-- | drivers/net/wireless/realtek/rtl818x/rtl8180/Makefile | 6 | ||||
| -rw-r--r-- | drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c | 1990 | ||||
| -rw-r--r-- | drivers/net/wireless/realtek/rtl818x/rtl8180/grf5101.c | 187 | ||||
| -rw-r--r-- | drivers/net/wireless/realtek/rtl818x/rtl8180/grf5101.h | 25 | ||||
| -rw-r--r-- | drivers/net/wireless/realtek/rtl818x/rtl8180/max2820.c | 165 | ||||
| -rw-r--r-- | drivers/net/wireless/realtek/rtl818x/rtl8180/max2820.h | 25 | ||||
| -rw-r--r-- | drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8180.h | 186 | ||||
| -rw-r--r-- | drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8225.c | 767 | ||||
| -rw-r--r-- | drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8225.h | 24 | ||||
| -rw-r--r-- | drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8225se.c | 430 | ||||
| -rw-r--r-- | drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8225se.h | 58 | ||||
| -rw-r--r-- | drivers/net/wireless/realtek/rtl818x/rtl8180/sa2400.c | 225 | ||||
| -rw-r--r-- | drivers/net/wireless/realtek/rtl818x/rtl8180/sa2400.h | 33 |
13 files changed, 4121 insertions, 0 deletions
diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/Makefile b/drivers/net/wireless/realtek/rtl818x/rtl8180/Makefile new file mode 100644 index 000000000..565a9a114 --- /dev/null +++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0-only +rtl818x_pci-objs := dev.o rtl8225.o sa2400.o max2820.o grf5101.o rtl8225se.o + +obj-$(CONFIG_RTL8180) += rtl818x_pci.o + +ccflags-y += -I $(srctree)/$(src)/.. diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c b/drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c new file mode 100644 index 000000000..025619cd1 --- /dev/null +++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c @@ -0,0 +1,1990 @@ + +/* Linux device driver for RTL8180 / RTL8185 / RTL8187SE + * + * Copyright 2007 Michael Wu <flamingice@sourmilk.net> + * Copyright 2007,2014 Andrea Merello <andrea.merello@gmail.com> + * + * Based on the r8180 driver, which is: + * Copyright 2004-2005 Andrea Merello <andrea.merello@gmail.com>, et al. + * + * Thanks to Realtek for their support! + * + ************************************************************************ + * + * The driver was extended to the RTL8187SE in 2014 by + * Andrea Merello <andrea.merello@gmail.com> + * + * based also on: + * - portions of rtl8187se Linux staging driver, Copyright Realtek corp. + * (available in drivers/staging/rtl8187se directory of Linux 3.14) + * - other GPL, unpublished (until now), Linux driver code, + * Copyright Larry Finger <Larry.Finger@lwfinger.net> + * + * A huge thanks goes to Sara V. Nari who forgives me when I'm + * sitting in front of my laptop at evening, week-end, night... + * + * A special thanks goes to Antonio Cuni, who helped me with + * some python userspace stuff I used to debug RTL8187SE code, and who + * bought a laptop with an unsupported Wi-Fi card some years ago... + * + * Thanks to Larry Finger for writing some code for rtl8187se and for + * his suggestions. + * + * Thanks to Dan Carpenter for reviewing my initial patch and for his + * suggestions. + * + * Thanks to Bernhard Schiffner for his help in testing and for his + * suggestions. + * + ************************************************************************ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/etherdevice.h> +#include <linux/eeprom_93cx6.h> +#include <linux/module.h> +#include <net/mac80211.h> + +#include "rtl8180.h" +#include "rtl8225.h" +#include "sa2400.h" +#include "max2820.h" +#include "grf5101.h" +#include "rtl8225se.h" + +MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>"); +MODULE_AUTHOR("Andrea Merello <andrea.merello@gmail.com>"); +MODULE_DESCRIPTION("RTL8180 / RTL8185 / RTL8187SE PCI wireless driver"); +MODULE_LICENSE("GPL"); + +static const struct pci_device_id rtl8180_table[] = { + + /* rtl8187se */ + { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8199) }, + + /* rtl8185 */ + { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8185) }, + { PCI_DEVICE(PCI_VENDOR_ID_BELKIN, 0x700f) }, + { PCI_DEVICE(PCI_VENDOR_ID_BELKIN, 0x701f) }, + + /* rtl8180 */ + { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8180) }, + { PCI_DEVICE(0x1799, 0x6001) }, + { PCI_DEVICE(0x1799, 0x6020) }, + { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x3300) }, + { PCI_DEVICE(0x1186, 0x3301) }, + { PCI_DEVICE(0x1432, 0x7106) }, + { } +}; + +MODULE_DEVICE_TABLE(pci, rtl8180_table); + +static const struct ieee80211_rate rtl818x_rates[] = { + { .bitrate = 10, .hw_value = 0, }, + { .bitrate = 20, .hw_value = 1, }, + { .bitrate = 55, .hw_value = 2, }, + { .bitrate = 110, .hw_value = 3, }, + { .bitrate = 60, .hw_value = 4, }, + { .bitrate = 90, .hw_value = 5, }, + { .bitrate = 120, .hw_value = 6, }, + { .bitrate = 180, .hw_value = 7, }, + { .bitrate = 240, .hw_value = 8, }, + { .bitrate = 360, .hw_value = 9, }, + { .bitrate = 480, .hw_value = 10, }, + { .bitrate = 540, .hw_value = 11, }, +}; + +static const struct ieee80211_channel rtl818x_channels[] = { + { .center_freq = 2412 }, + { .center_freq = 2417 }, + { .center_freq = 2422 }, + { .center_freq = 2427 }, + { .center_freq = 2432 }, + { .center_freq = 2437 }, + { .center_freq = 2442 }, + { .center_freq = 2447 }, + { .center_freq = 2452 }, + { .center_freq = 2457 }, + { .center_freq = 2462 }, + { .center_freq = 2467 }, + { .center_freq = 2472 }, + { .center_freq = 2484 }, +}; + +/* Queues for rtl8187se card + * + * name | reg | queue + * BC | 7 | 6 + * MG | 1 | 0 + * HI | 6 | 1 + * VO | 5 | 2 + * VI | 4 | 3 + * BE | 3 | 4 + * BK | 2 | 5 + * + * The complete map for DMA kick reg using use all queue is: + * static const int rtl8187se_queues_map[RTL8187SE_NR_TX_QUEUES] = + * {1, 6, 5, 4, 3, 2, 7}; + * + * .. but.. Because for mac80211 4 queues are enough for QoS we use this + * + * name | reg | queue + * BC | 7 | 4 <- currently not used yet + * MG | 1 | x <- Not used + * HI | 6 | x <- Not used + * VO | 5 | 0 <- used + * VI | 4 | 1 <- used + * BE | 3 | 2 <- used + * BK | 2 | 3 <- used + * + * Beacon queue could be used, but this is not finished yet. + * + * I thougth about using the other two queues but I decided not to do this: + * + * - I'm unsure whether the mac80211 will ever try to use more than 4 queues + * by itself. + * + * - I could route MGMT frames (currently sent over VO queue) to the MGMT + * queue but since mac80211 will do not know about it, I will probably gain + * some HW priority whenever the VO queue is not empty, but this gain is + * limited by the fact that I had to stop the mac80211 queue whenever one of + * the VO or MGMT queues is full, stopping also submitting of MGMT frame + * to the driver. + * + * - I don't know how to set in the HW the contention window params for MGMT + * and HI-prio queues. + */ + +static const int rtl8187se_queues_map[RTL8187SE_NR_TX_QUEUES] = {5, 4, 3, 2, 7}; + +/* Queues for rtl8180/rtl8185 cards + * + * name | reg | prio + * BC | 7 | 3 + * HI | 6 | 0 + * NO | 5 | 1 + * LO | 4 | 2 + * + * The complete map for DMA kick reg using all queue is: + * static const int rtl8180_queues_map[RTL8180_NR_TX_QUEUES] = {6, 5, 4, 7}; + * + * .. but .. Because the mac80211 needs at least 4 queues for QoS or + * otherwise QoS can't be done, we use just one. + * Beacon queue could be used, but this is not finished yet. + * Actual map is: + * + * name | reg | prio + * BC | 7 | 1 <- currently not used yet. + * HI | 6 | x <- not used + * NO | 5 | x <- not used + * LO | 4 | 0 <- used + */ + +static const int rtl8180_queues_map[RTL8180_NR_TX_QUEUES] = {4, 7}; + +/* LNA gain table for rtl8187se */ +static const u8 rtl8187se_lna_gain[4] = {02, 17, 29, 39}; + +void rtl8180_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data) +{ + struct rtl8180_priv *priv = dev->priv; + int i = 10; + u32 buf; + + buf = (data << 8) | addr; + + rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->PHY[0], buf | 0x80); + while (i--) { + rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->PHY[0], buf); + if (rtl818x_ioread8(priv, &priv->map->PHY[2]) == (data & 0xFF)) + return; + } +} + +static void rtl8180_handle_rx(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + struct rtl818x_rx_cmd_desc *cmd_desc; + unsigned int count = 32; + u8 agc, sq; + s8 signal = 1; + dma_addr_t mapping; + + while (count--) { + void *entry = priv->rx_ring + priv->rx_idx * priv->rx_ring_sz; + struct sk_buff *skb = priv->rx_buf[priv->rx_idx]; + u32 flags, flags2, flags3 = 0; + u64 tsft; + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) { + struct rtl8187se_rx_desc *desc = entry; + + flags = le32_to_cpu(desc->flags); + /* if ownership flag is set, then we can trust the + * HW has written other fields. We must not trust + * other descriptor data read before we checked (read) + * the ownership flag + */ + rmb(); + flags3 = le32_to_cpu(desc->flags3); + flags2 = le32_to_cpu(desc->flags2); + tsft = le64_to_cpu(desc->tsft); + } else { + struct rtl8180_rx_desc *desc = entry; + + flags = le32_to_cpu(desc->flags); + /* same as above */ + rmb(); + flags2 = le32_to_cpu(desc->flags2); + tsft = le64_to_cpu(desc->tsft); + } + + if (flags & RTL818X_RX_DESC_FLAG_OWN) + return; + + if (unlikely(flags & (RTL818X_RX_DESC_FLAG_DMA_FAIL | + RTL818X_RX_DESC_FLAG_FOF | + RTL818X_RX_DESC_FLAG_RX_ERR))) + goto done; + else { + struct ieee80211_rx_status rx_status = {0}; + struct sk_buff *new_skb = dev_alloc_skb(MAX_RX_SIZE); + + if (unlikely(!new_skb)) + goto done; + + mapping = dma_map_single(&priv->pdev->dev, + skb_tail_pointer(new_skb), + MAX_RX_SIZE, DMA_FROM_DEVICE); + + if (dma_mapping_error(&priv->pdev->dev, mapping)) { + kfree_skb(new_skb); + dev_err(&priv->pdev->dev, "RX DMA map error\n"); + + goto done; + } + + dma_unmap_single(&priv->pdev->dev, + *((dma_addr_t *)skb->cb), + MAX_RX_SIZE, DMA_FROM_DEVICE); + skb_put(skb, flags & 0xFFF); + + rx_status.antenna = (flags2 >> 15) & 1; + rx_status.rate_idx = (flags >> 20) & 0xF; + agc = (flags2 >> 17) & 0x7F; + + switch (priv->chip_family) { + case RTL818X_CHIP_FAMILY_RTL8185: + if (rx_status.rate_idx > 3) + signal = -clamp_t(u8, agc, 25, 90) - 9; + else + signal = -clamp_t(u8, agc, 30, 95); + break; + case RTL818X_CHIP_FAMILY_RTL8180: + sq = flags2 & 0xff; + signal = priv->rf->calc_rssi(agc, sq); + break; + case RTL818X_CHIP_FAMILY_RTL8187SE: + /* OFDM measure reported by HW is signed, + * in 0.5dBm unit, with zero centered @ -41dBm + * input signal. + */ + if (rx_status.rate_idx > 3) { + signal = (s8)((flags3 >> 16) & 0xff); + signal = signal / 2 - 41; + } else { + int idx, bb; + + idx = (agc & 0x60) >> 5; + bb = (agc & 0x1F) * 2; + /* bias + BB gain + LNA gain */ + signal = 4 - bb - rtl8187se_lna_gain[idx]; + } + break; + } + rx_status.signal = signal; + rx_status.freq = dev->conf.chandef.chan->center_freq; + rx_status.band = dev->conf.chandef.chan->band; + rx_status.mactime = tsft; + rx_status.flag |= RX_FLAG_MACTIME_START; + if (flags & RTL818X_RX_DESC_FLAG_SPLCP) + rx_status.enc_flags |= RX_ENC_FLAG_SHORTPRE; + if (flags & RTL818X_RX_DESC_FLAG_CRC32_ERR) + rx_status.flag |= RX_FLAG_FAILED_FCS_CRC; + + memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status)); + ieee80211_rx_irqsafe(dev, skb); + + skb = new_skb; + priv->rx_buf[priv->rx_idx] = skb; + *((dma_addr_t *) skb->cb) = mapping; + } + + done: + cmd_desc = entry; + cmd_desc->rx_buf = cpu_to_le32(*((dma_addr_t *)skb->cb)); + cmd_desc->flags = cpu_to_le32(RTL818X_RX_DESC_FLAG_OWN | + MAX_RX_SIZE); + if (priv->rx_idx == 31) + cmd_desc->flags |= + cpu_to_le32(RTL818X_RX_DESC_FLAG_EOR); + priv->rx_idx = (priv->rx_idx + 1) % 32; + } +} + +static void rtl8180_handle_tx(struct ieee80211_hw *dev, unsigned int prio) +{ + struct rtl8180_priv *priv = dev->priv; + struct rtl8180_tx_ring *ring = &priv->tx_ring[prio]; + + while (skb_queue_len(&ring->queue)) { + struct rtl8180_tx_desc *entry = &ring->desc[ring->idx]; + struct sk_buff *skb; + struct ieee80211_tx_info *info; + u32 flags = le32_to_cpu(entry->flags); + + if (flags & RTL818X_TX_DESC_FLAG_OWN) + return; + + ring->idx = (ring->idx + 1) % ring->entries; + skb = __skb_dequeue(&ring->queue); + dma_unmap_single(&priv->pdev->dev, le32_to_cpu(entry->tx_buf), + skb->len, DMA_TO_DEVICE); + + info = IEEE80211_SKB_CB(skb); + ieee80211_tx_info_clear_status(info); + + if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) && + (flags & RTL818X_TX_DESC_FLAG_TX_OK)) + info->flags |= IEEE80211_TX_STAT_ACK; + + info->status.rates[0].count = (flags & 0xFF) + 1; + + ieee80211_tx_status_irqsafe(dev, skb); + if (ring->entries - skb_queue_len(&ring->queue) == 2) + ieee80211_wake_queue(dev, prio); + } +} + +static irqreturn_t rtl8187se_interrupt(int irq, void *dev_id) +{ + struct ieee80211_hw *dev = dev_id; + struct rtl8180_priv *priv = dev->priv; + u32 reg; + unsigned long flags; + static int desc_err; + + spin_lock_irqsave(&priv->lock, flags); + /* Note: 32-bit interrupt status */ + reg = rtl818x_ioread32(priv, &priv->map->INT_STATUS_SE); + if (unlikely(reg == 0xFFFFFFFF)) { + spin_unlock_irqrestore(&priv->lock, flags); + return IRQ_HANDLED; + } + + rtl818x_iowrite32(priv, &priv->map->INT_STATUS_SE, reg); + + if (reg & IMR_TIMEOUT1) + rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0); + + if (reg & (IMR_TBDOK | IMR_TBDER)) + rtl8180_handle_tx(dev, 4); + + if (reg & (IMR_TVODOK | IMR_TVODER)) + rtl8180_handle_tx(dev, 0); + + if (reg & (IMR_TVIDOK | IMR_TVIDER)) + rtl8180_handle_tx(dev, 1); + + if (reg & (IMR_TBEDOK | IMR_TBEDER)) + rtl8180_handle_tx(dev, 2); + + if (reg & (IMR_TBKDOK | IMR_TBKDER)) + rtl8180_handle_tx(dev, 3); + + if (reg & (IMR_ROK | IMR_RER | RTL818X_INT_SE_RX_DU | IMR_RQOSOK)) + rtl8180_handle_rx(dev); + /* The interface sometimes generates several RX DMA descriptor errors + * at startup. Do not report these. + */ + if ((reg & RTL818X_INT_SE_RX_DU) && desc_err++ > 2) + if (net_ratelimit()) + wiphy_err(dev->wiphy, "No RX DMA Descriptor avail\n"); + + spin_unlock_irqrestore(&priv->lock, flags); + return IRQ_HANDLED; +} + +static irqreturn_t rtl8180_interrupt(int irq, void *dev_id) +{ + struct ieee80211_hw *dev = dev_id; + struct rtl8180_priv *priv = dev->priv; + u16 reg; + + spin_lock(&priv->lock); + reg = rtl818x_ioread16(priv, &priv->map->INT_STATUS); + if (unlikely(reg == 0xFFFF)) { + spin_unlock(&priv->lock); + return IRQ_HANDLED; + } + + rtl818x_iowrite16(priv, &priv->map->INT_STATUS, reg); + + if (reg & (RTL818X_INT_TXB_OK | RTL818X_INT_TXB_ERR)) + rtl8180_handle_tx(dev, 1); + + if (reg & (RTL818X_INT_TXL_OK | RTL818X_INT_TXL_ERR)) + rtl8180_handle_tx(dev, 0); + + if (reg & (RTL818X_INT_RX_OK | RTL818X_INT_RX_ERR)) + rtl8180_handle_rx(dev); + + spin_unlock(&priv->lock); + + return IRQ_HANDLED; +} + +static void rtl8180_tx(struct ieee80211_hw *dev, + struct ieee80211_tx_control *control, + struct sk_buff *skb) +{ + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + struct rtl8180_priv *priv = dev->priv; + struct rtl8180_tx_ring *ring; + struct rtl8180_tx_desc *entry; + unsigned int prio = 0; + unsigned long flags; + unsigned int idx, hw_prio; + + dma_addr_t mapping; + u32 tx_flags; + u8 rc_flags; + u16 plcp_len = 0; + __le16 rts_duration = 0; + /* do arithmetic and then convert to le16 */ + u16 frame_duration = 0; + + /* rtl8180/rtl8185 only has one useable tx queue */ + if (dev->queues > IEEE80211_AC_BK) + prio = skb_get_queue_mapping(skb); + ring = &priv->tx_ring[prio]; + + mapping = dma_map_single(&priv->pdev->dev, skb->data, skb->len, + DMA_TO_DEVICE); + + if (dma_mapping_error(&priv->pdev->dev, mapping)) { + kfree_skb(skb); + dev_err(&priv->pdev->dev, "TX DMA mapping error\n"); + return; + } + + tx_flags = RTL818X_TX_DESC_FLAG_OWN | RTL818X_TX_DESC_FLAG_FS | + RTL818X_TX_DESC_FLAG_LS | + (ieee80211_get_tx_rate(dev, info)->hw_value << 24) | + skb->len; + + if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) + tx_flags |= RTL818X_TX_DESC_FLAG_DMA | + RTL818X_TX_DESC_FLAG_NO_ENC; + + rc_flags = info->control.rates[0].flags; + + /* HW will perform RTS-CTS when only RTS flags is set. + * HW will perform CTS-to-self when both RTS and CTS flags are set. + * RTS rate and RTS duration will be used also for CTS-to-self. + */ + if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) { + tx_flags |= RTL818X_TX_DESC_FLAG_RTS; + tx_flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19; + rts_duration = ieee80211_rts_duration(dev, priv->vif, + skb->len, info); + } else if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { + tx_flags |= RTL818X_TX_DESC_FLAG_RTS | RTL818X_TX_DESC_FLAG_CTS; + tx_flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19; + rts_duration = ieee80211_ctstoself_duration(dev, priv->vif, + skb->len, info); + } + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180) { + unsigned int remainder; + + plcp_len = DIV_ROUND_UP(16 * (skb->len + 4), + (ieee80211_get_tx_rate(dev, info)->bitrate * 2) / 10); + remainder = (16 * (skb->len + 4)) % + ((ieee80211_get_tx_rate(dev, info)->bitrate * 2) / 10); + if (remainder <= 6) + plcp_len |= 1 << 15; + } + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) { + __le16 duration; + /* SIFS time (required by HW) is already included by + * ieee80211_generic_frame_duration + */ + duration = ieee80211_generic_frame_duration(dev, priv->vif, + NL80211_BAND_2GHZ, skb->len, + ieee80211_get_tx_rate(dev, info)); + + frame_duration = priv->ack_time + le16_to_cpu(duration); + } + + spin_lock_irqsave(&priv->lock, flags); + + if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { + if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) + priv->seqno += 0x10; + hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); + hdr->seq_ctrl |= cpu_to_le16(priv->seqno); + } + + idx = (ring->idx + skb_queue_len(&ring->queue)) % ring->entries; + entry = &ring->desc[idx]; + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) { + entry->frame_duration = cpu_to_le16(frame_duration); + entry->frame_len_se = cpu_to_le16(skb->len); + + /* tpc polarity */ + entry->flags3 = cpu_to_le16(1<<4); + } else + entry->frame_len = cpu_to_le32(skb->len); + + entry->rts_duration = rts_duration; + entry->plcp_len = cpu_to_le16(plcp_len); + entry->tx_buf = cpu_to_le32(mapping); + + entry->retry_limit = info->control.rates[0].count - 1; + + /* We must be sure that tx_flags is written last because the HW + * looks at it to check if the rest of data is valid or not + */ + wmb(); + entry->flags = cpu_to_le32(tx_flags); + /* We must be sure this has been written before followings HW + * register write, because this write will made the HW attempts + * to DMA the just-written data + */ + wmb(); + + __skb_queue_tail(&ring->queue, skb); + if (ring->entries - skb_queue_len(&ring->queue) < 2) + ieee80211_stop_queue(dev, prio); + + spin_unlock_irqrestore(&priv->lock, flags); + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) { + /* just poll: rings are stopped with TPPollStop reg */ + hw_prio = rtl8187se_queues_map[prio]; + rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING, + (1 << hw_prio)); + } else { + hw_prio = rtl8180_queues_map[prio]; + rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING, + (1 << hw_prio) | /* ring to poll */ + (1<<1) | (1<<2));/* stopped rings */ + } +} + +static void rtl8180_set_anaparam3(struct rtl8180_priv *priv, u16 anaparam3) +{ + u8 reg; + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, + RTL818X_EEPROM_CMD_CONFIG); + + reg = rtl818x_ioread8(priv, &priv->map->CONFIG3); + rtl818x_iowrite8(priv, &priv->map->CONFIG3, + reg | RTL818X_CONFIG3_ANAPARAM_WRITE); + + rtl818x_iowrite16(priv, &priv->map->ANAPARAM3, anaparam3); + + rtl818x_iowrite8(priv, &priv->map->CONFIG3, + reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE); + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, + RTL818X_EEPROM_CMD_NORMAL); +} + +void rtl8180_set_anaparam2(struct rtl8180_priv *priv, u32 anaparam2) +{ + u8 reg; + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, + RTL818X_EEPROM_CMD_CONFIG); + + reg = rtl818x_ioread8(priv, &priv->map->CONFIG3); + rtl818x_iowrite8(priv, &priv->map->CONFIG3, + reg | RTL818X_CONFIG3_ANAPARAM_WRITE); + + rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, anaparam2); + + rtl818x_iowrite8(priv, &priv->map->CONFIG3, + reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE); + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, + RTL818X_EEPROM_CMD_NORMAL); +} + +void rtl8180_set_anaparam(struct rtl8180_priv *priv, u32 anaparam) +{ + u8 reg; + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); + reg = rtl818x_ioread8(priv, &priv->map->CONFIG3); + rtl818x_iowrite8(priv, &priv->map->CONFIG3, + reg | RTL818X_CONFIG3_ANAPARAM_WRITE); + rtl818x_iowrite32(priv, &priv->map->ANAPARAM, anaparam); + rtl818x_iowrite8(priv, &priv->map->CONFIG3, + reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE); + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); +} + +static void rtl8187se_mac_config(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + u8 reg; + + rtl818x_iowrite32(priv, REG_ADDR4(0x1F0), 0); + rtl818x_ioread32(priv, REG_ADDR4(0x1F0)); + rtl818x_iowrite32(priv, REG_ADDR4(0x1F4), 0); + rtl818x_ioread32(priv, REG_ADDR4(0x1F4)); + rtl818x_iowrite8(priv, REG_ADDR1(0x1F8), 0); + rtl818x_ioread8(priv, REG_ADDR1(0x1F8)); + /* Enable DA10 TX power saving */ + reg = rtl818x_ioread8(priv, &priv->map->PHY_PR); + rtl818x_iowrite8(priv, &priv->map->PHY_PR, reg | 0x04); + /* Power */ + rtl818x_iowrite16(priv, PI_DATA_REG, 0x1000); + rtl818x_iowrite16(priv, SI_DATA_REG, 0x1000); + /* AFE - default to power ON */ + rtl818x_iowrite16(priv, REG_ADDR2(0x370), 0x0560); + rtl818x_iowrite16(priv, REG_ADDR2(0x372), 0x0560); + rtl818x_iowrite16(priv, REG_ADDR2(0x374), 0x0DA4); + rtl818x_iowrite16(priv, REG_ADDR2(0x376), 0x0DA4); + rtl818x_iowrite16(priv, REG_ADDR2(0x378), 0x0560); + rtl818x_iowrite16(priv, REG_ADDR2(0x37A), 0x0560); + rtl818x_iowrite16(priv, REG_ADDR2(0x37C), 0x00EC); + rtl818x_iowrite16(priv, REG_ADDR2(0x37E), 0x00EC); + rtl818x_iowrite8(priv, REG_ADDR1(0x24E), 0x01); + /* unknown, needed for suspend to RAM resume */ + rtl818x_iowrite8(priv, REG_ADDR1(0x0A), 0x72); +} + +static void rtl8187se_set_antenna_config(struct ieee80211_hw *dev, u8 def_ant, + bool diversity) +{ + struct rtl8180_priv *priv = dev->priv; + + rtl8225_write_phy_cck(dev, 0x0C, 0x09); + if (diversity) { + if (def_ant == 1) { + rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x00); + rtl8225_write_phy_cck(dev, 0x11, 0xBB); + rtl8225_write_phy_cck(dev, 0x01, 0xC7); + rtl8225_write_phy_ofdm(dev, 0x0D, 0x54); + rtl8225_write_phy_ofdm(dev, 0x18, 0xB2); + } else { /* main antenna */ + rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03); + rtl8225_write_phy_cck(dev, 0x11, 0x9B); + rtl8225_write_phy_cck(dev, 0x01, 0xC7); + rtl8225_write_phy_ofdm(dev, 0x0D, 0x5C); + rtl8225_write_phy_ofdm(dev, 0x18, 0xB2); + } + } else { /* disable antenna diversity */ + if (def_ant == 1) { + rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x00); + rtl8225_write_phy_cck(dev, 0x11, 0xBB); + rtl8225_write_phy_cck(dev, 0x01, 0x47); + rtl8225_write_phy_ofdm(dev, 0x0D, 0x54); + rtl8225_write_phy_ofdm(dev, 0x18, 0x32); + } else { /* main antenna */ + rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03); + rtl8225_write_phy_cck(dev, 0x11, 0x9B); + rtl8225_write_phy_cck(dev, 0x01, 0x47); + rtl8225_write_phy_ofdm(dev, 0x0D, 0x5C); + rtl8225_write_phy_ofdm(dev, 0x18, 0x32); + } + } + /* priv->curr_ant = def_ant; */ +} + +static void rtl8180_int_enable(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) { + rtl818x_iowrite32(priv, &priv->map->IMR, + IMR_TBDER | IMR_TBDOK | + IMR_TVODER | IMR_TVODOK | + IMR_TVIDER | IMR_TVIDOK | + IMR_TBEDER | IMR_TBEDOK | + IMR_TBKDER | IMR_TBKDOK | + IMR_RDU | IMR_RER | + IMR_ROK | IMR_RQOSOK); + } else { + rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF); + } +} + +static void rtl8180_int_disable(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) { + rtl818x_iowrite32(priv, &priv->map->IMR, 0); + } else { + rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0); + } +} + +static void rtl8180_conf_basic_rates(struct ieee80211_hw *dev, + u32 basic_mask) +{ + struct rtl8180_priv *priv = dev->priv; + u16 reg; + u32 resp_mask; + u8 basic_max; + u8 resp_max, resp_min; + + resp_mask = basic_mask; + /* IEEE80211 says the response rate should be equal to the highest basic + * rate that is not faster than received frame. But it says also that if + * the basic rate set does not contains any rate for the current + * modulation class then mandatory rate set must be used for that + * modulation class. Eventually add OFDM mandatory rates.. + */ + if ((resp_mask & 0xf) == resp_mask) + resp_mask |= 0x150; /* 6, 12, 24Mbps */ + + switch (priv->chip_family) { + + case RTL818X_CHIP_FAMILY_RTL8180: + /* in 8180 this is NOT a BITMAP */ + basic_max = fls(basic_mask) - 1; + reg = rtl818x_ioread16(priv, &priv->map->BRSR); + reg &= ~3; + reg |= basic_max; + rtl818x_iowrite16(priv, &priv->map->BRSR, reg); + break; + + case RTL818X_CHIP_FAMILY_RTL8185: + resp_max = fls(resp_mask) - 1; + resp_min = ffs(resp_mask) - 1; + /* in 8185 this is a BITMAP */ + rtl818x_iowrite16(priv, &priv->map->BRSR, basic_mask); + rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (resp_max << 4) | + resp_min); + break; + + case RTL818X_CHIP_FAMILY_RTL8187SE: + /* in 8187se this is a BITMAP. BRSR reg actually sets + * response rates. + */ + rtl818x_iowrite16(priv, &priv->map->BRSR_8187SE, resp_mask); + break; + } +} + +static void rtl8180_config_cardbus(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + u16 reg16; + u8 reg8; + + reg8 = rtl818x_ioread8(priv, &priv->map->CONFIG3); + reg8 |= 1 << 1; + rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg8); + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) { + rtl818x_iowrite16(priv, FEMR_SE, 0xffff); + } else { + reg16 = rtl818x_ioread16(priv, &priv->map->FEMR); + reg16 |= (1 << 15) | (1 << 14) | (1 << 4); + rtl818x_iowrite16(priv, &priv->map->FEMR, reg16); + } + +} + +static int rtl8180_init_hw(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + u16 reg; + u32 reg32; + + rtl818x_iowrite8(priv, &priv->map->CMD, 0); + rtl818x_ioread8(priv, &priv->map->CMD); + msleep(10); + + /* reset */ + rtl8180_int_disable(dev); + rtl818x_ioread8(priv, &priv->map->CMD); + + reg = rtl818x_ioread8(priv, &priv->map->CMD); + reg &= (1 << 1); + reg |= RTL818X_CMD_RESET; + rtl818x_iowrite8(priv, &priv->map->CMD, RTL818X_CMD_RESET); + rtl818x_ioread8(priv, &priv->map->CMD); + msleep(200); + + /* check success of reset */ + if (rtl818x_ioread8(priv, &priv->map->CMD) & RTL818X_CMD_RESET) { + wiphy_err(dev->wiphy, "reset timeout!\n"); + return -ETIMEDOUT; + } + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_LOAD); + rtl818x_ioread8(priv, &priv->map->CMD); + msleep(200); + + if (rtl818x_ioread8(priv, &priv->map->CONFIG3) & (1 << 3)) { + rtl8180_config_cardbus(dev); + } + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) + rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_ENEDCA); + else + rtl818x_iowrite8(priv, &priv->map->MSR, 0); + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180) + rtl8180_set_anaparam(priv, priv->anaparam); + + rtl818x_iowrite32(priv, &priv->map->RDSAR, priv->rx_ring_dma); + /* mac80211 queue have higher prio for lower index. The last queue + * (that mac80211 is not aware of) is reserved for beacons (and have + * the highest priority on the NIC) + */ + if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8187SE) { + rtl818x_iowrite32(priv, &priv->map->TBDA, + priv->tx_ring[1].dma); + rtl818x_iowrite32(priv, &priv->map->TLPDA, + priv->tx_ring[0].dma); + } else { + rtl818x_iowrite32(priv, &priv->map->TBDA, + priv->tx_ring[4].dma); + rtl818x_iowrite32(priv, &priv->map->TVODA, + priv->tx_ring[0].dma); + rtl818x_iowrite32(priv, &priv->map->TVIDA, + priv->tx_ring[1].dma); + rtl818x_iowrite32(priv, &priv->map->TBEDA, + priv->tx_ring[2].dma); + rtl818x_iowrite32(priv, &priv->map->TBKDA, + priv->tx_ring[3].dma); + } + + /* TODO: necessary? specs indicate not */ + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); + reg = rtl818x_ioread8(priv, &priv->map->CONFIG2); + rtl818x_iowrite8(priv, &priv->map->CONFIG2, reg & ~(1 << 3)); + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8185) { + reg = rtl818x_ioread8(priv, &priv->map->CONFIG2); + rtl818x_iowrite8(priv, &priv->map->CONFIG2, reg | (1 << 4)); + } + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); + + /* TODO: set CONFIG5 for calibrating AGC on rtl8180 + philips radio? */ + + /* TODO: turn off hw wep on rtl8180 */ + + rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0); + + if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) { + rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0); + rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, 0); + } else { + rtl818x_iowrite8(priv, &priv->map->SECURITY, 0); + + rtl818x_iowrite8(priv, &priv->map->PHY_DELAY, 0x6); + rtl818x_iowrite8(priv, &priv->map->CARRIER_SENSE_COUNTER, 0x4C); + } + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8185) { + /* TODO: set ClkRun enable? necessary? */ + reg = rtl818x_ioread8(priv, &priv->map->GP_ENABLE); + rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, reg & ~(1 << 6)); + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); + reg = rtl818x_ioread8(priv, &priv->map->CONFIG3); + rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | (1 << 2)); + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); + /* fix eccessive IFS after CTS-to-self */ + if (priv->map_pio) { + u8 reg; + + reg = rtl818x_ioread8(priv, &priv->map->PGSELECT); + rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg | 1); + rtl818x_iowrite8(priv, REG_ADDR1(0xff), 0x35); + rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg); + } else + rtl818x_iowrite8(priv, REG_ADDR1(0x1ff), 0x35); + } + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) { + + /* the set auto rate fallback bitmask from 1M to 54 Mb/s */ + rtl818x_iowrite16(priv, ARFR, 0xFFF); + rtl818x_ioread16(priv, ARFR); + + /* stop unused queus (no dma alloc) */ + rtl818x_iowrite8(priv, &priv->map->TPPOLL_STOP, + RTL818x_TPPOLL_STOP_MG | RTL818x_TPPOLL_STOP_HI); + + rtl818x_iowrite8(priv, &priv->map->ACM_CONTROL, 0x00); + rtl818x_iowrite16(priv, &priv->map->TID_AC_MAP, 0xFA50); + + rtl818x_iowrite16(priv, &priv->map->INT_MIG, 0); + + /* some black magic here.. */ + rtl8187se_mac_config(dev); + + rtl818x_iowrite16(priv, RFSW_CTRL, 0x569A); + rtl818x_ioread16(priv, RFSW_CTRL); + + rtl8180_set_anaparam(priv, RTL8225SE_ANAPARAM_ON); + rtl8180_set_anaparam2(priv, RTL8225SE_ANAPARAM2_ON); + rtl8180_set_anaparam3(priv, RTL8225SE_ANAPARAM3); + + + rtl818x_iowrite8(priv, &priv->map->CONFIG5, + rtl818x_ioread8(priv, &priv->map->CONFIG5) & 0x7F); + + /*probably this switch led on */ + rtl818x_iowrite8(priv, &priv->map->PGSELECT, + rtl818x_ioread8(priv, &priv->map->PGSELECT) | 0x08); + + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x0480); + rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1BFF); + rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x2488); + + rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x4003); + + /* the reference code mac hardcode table write + * this reg by doing byte-wide accesses. + * It does it just for lowest and highest byte.. + */ + reg32 = rtl818x_ioread32(priv, &priv->map->RF_PARA); + reg32 &= 0x00ffff00; + reg32 |= 0xb8000054; + rtl818x_iowrite32(priv, &priv->map->RF_PARA, reg32); + } else + /* stop unused queus (no dma alloc) */ + rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING, + (1<<1) | (1<<2)); + + priv->rf->init(dev); + + /* default basic rates are 1,2 Mbps for rtl8180. 1,2,6,9,12,18,24 Mbps + * otherwise. bitmask 0x3 and 0x01f3 respectively. + * NOTE: currenty rtl8225 RF code changes basic rates, so we need to do + * this after rf init. + * TODO: try to find out whether RF code really needs to do this.. + */ + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180) + rtl8180_conf_basic_rates(dev, 0x3); + else + rtl8180_conf_basic_rates(dev, 0x1f3); + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) + rtl8187se_set_antenna_config(dev, + priv->antenna_diversity_default, + priv->antenna_diversity_en); + return 0; +} + +static int rtl8180_init_rx_ring(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + struct rtl818x_rx_cmd_desc *entry; + int i; + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) + priv->rx_ring_sz = sizeof(struct rtl8187se_rx_desc); + else + priv->rx_ring_sz = sizeof(struct rtl8180_rx_desc); + + priv->rx_ring = dma_alloc_coherent(&priv->pdev->dev, + priv->rx_ring_sz * 32, + &priv->rx_ring_dma, GFP_KERNEL); + if (!priv->rx_ring || (unsigned long)priv->rx_ring & 0xFF) { + wiphy_err(dev->wiphy, "Cannot allocate RX ring\n"); + return -ENOMEM; + } + + priv->rx_idx = 0; + + for (i = 0; i < 32; i++) { + struct sk_buff *skb = dev_alloc_skb(MAX_RX_SIZE); + dma_addr_t *mapping; + entry = priv->rx_ring + priv->rx_ring_sz*i; + if (!skb) { + dma_free_coherent(&priv->pdev->dev, + priv->rx_ring_sz * 32, + priv->rx_ring, priv->rx_ring_dma); + wiphy_err(dev->wiphy, "Cannot allocate RX skb\n"); + return -ENOMEM; + } + priv->rx_buf[i] = skb; + mapping = (dma_addr_t *)skb->cb; + *mapping = dma_map_single(&priv->pdev->dev, + skb_tail_pointer(skb), MAX_RX_SIZE, + DMA_FROM_DEVICE); + + if (dma_mapping_error(&priv->pdev->dev, *mapping)) { + kfree_skb(skb); + dma_free_coherent(&priv->pdev->dev, + priv->rx_ring_sz * 32, + priv->rx_ring, priv->rx_ring_dma); + wiphy_err(dev->wiphy, "Cannot map DMA for RX skb\n"); + return -ENOMEM; + } + + entry->rx_buf = cpu_to_le32(*mapping); + entry->flags = cpu_to_le32(RTL818X_RX_DESC_FLAG_OWN | + MAX_RX_SIZE); + } + entry->flags |= cpu_to_le32(RTL818X_RX_DESC_FLAG_EOR); + return 0; +} + +static void rtl8180_free_rx_ring(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + int i; + + for (i = 0; i < 32; i++) { + struct sk_buff *skb = priv->rx_buf[i]; + if (!skb) + continue; + + dma_unmap_single(&priv->pdev->dev, *((dma_addr_t *)skb->cb), + MAX_RX_SIZE, DMA_FROM_DEVICE); + kfree_skb(skb); + } + + dma_free_coherent(&priv->pdev->dev, priv->rx_ring_sz * 32, + priv->rx_ring, priv->rx_ring_dma); + priv->rx_ring = NULL; +} + +static int rtl8180_init_tx_ring(struct ieee80211_hw *dev, + unsigned int prio, unsigned int entries) +{ + struct rtl8180_priv *priv = dev->priv; + struct rtl8180_tx_desc *ring; + dma_addr_t dma; + int i; + + ring = dma_alloc_coherent(&priv->pdev->dev, sizeof(*ring) * entries, + &dma, GFP_KERNEL); + if (!ring || (unsigned long)ring & 0xFF) { + wiphy_err(dev->wiphy, "Cannot allocate TX ring (prio = %d)\n", + prio); + return -ENOMEM; + } + + priv->tx_ring[prio].desc = ring; + priv->tx_ring[prio].dma = dma; + priv->tx_ring[prio].idx = 0; + priv->tx_ring[prio].entries = entries; + skb_queue_head_init(&priv->tx_ring[prio].queue); + + for (i = 0; i < entries; i++) + ring[i].next_tx_desc = + cpu_to_le32((u32)dma + ((i + 1) % entries) * sizeof(*ring)); + + return 0; +} + +static void rtl8180_free_tx_ring(struct ieee80211_hw *dev, unsigned int prio) +{ + struct rtl8180_priv *priv = dev->priv; + struct rtl8180_tx_ring *ring = &priv->tx_ring[prio]; + + while (skb_queue_len(&ring->queue)) { + struct rtl8180_tx_desc *entry = &ring->desc[ring->idx]; + struct sk_buff *skb = __skb_dequeue(&ring->queue); + + dma_unmap_single(&priv->pdev->dev, le32_to_cpu(entry->tx_buf), + skb->len, DMA_TO_DEVICE); + kfree_skb(skb); + ring->idx = (ring->idx + 1) % ring->entries; + } + + dma_free_coherent(&priv->pdev->dev, + sizeof(*ring->desc) * ring->entries, ring->desc, + ring->dma); + ring->desc = NULL; +} + +static int rtl8180_start(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + int ret, i; + u32 reg; + + ret = rtl8180_init_rx_ring(dev); + if (ret) + return ret; + + for (i = 0; i < (dev->queues + 1); i++) + if ((ret = rtl8180_init_tx_ring(dev, i, 16))) + goto err_free_rings; + + ret = rtl8180_init_hw(dev); + if (ret) + goto err_free_rings; + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) { + ret = request_irq(priv->pdev->irq, rtl8187se_interrupt, + IRQF_SHARED, KBUILD_MODNAME, dev); + } else { + ret = request_irq(priv->pdev->irq, rtl8180_interrupt, + IRQF_SHARED, KBUILD_MODNAME, dev); + } + + if (ret) { + wiphy_err(dev->wiphy, "failed to register IRQ handler\n"); + goto err_free_rings; + } + + rtl8180_int_enable(dev); + + /* in rtl8187se at MAR regs offset there is the management + * TX descriptor DMA addres.. + */ + if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8187SE) { + rtl818x_iowrite32(priv, &priv->map->MAR[0], ~0); + rtl818x_iowrite32(priv, &priv->map->MAR[1], ~0); + } + + reg = RTL818X_RX_CONF_ONLYERLPKT | + RTL818X_RX_CONF_RX_AUTORESETPHY | + RTL818X_RX_CONF_MGMT | + RTL818X_RX_CONF_DATA | + (7 << 8 /* MAX RX DMA */) | + RTL818X_RX_CONF_BROADCAST | + RTL818X_RX_CONF_NICMAC; + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8185) + reg |= RTL818X_RX_CONF_CSDM1 | RTL818X_RX_CONF_CSDM2; + else if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180) { + reg |= (priv->rfparam & RF_PARAM_CARRIERSENSE1) + ? RTL818X_RX_CONF_CSDM1 : 0; + reg |= (priv->rfparam & RF_PARAM_CARRIERSENSE2) + ? RTL818X_RX_CONF_CSDM2 : 0; + } else { + reg &= ~(RTL818X_RX_CONF_CSDM1 | RTL818X_RX_CONF_CSDM2); + } + + priv->rx_conf = reg; + rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg); + + if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) { + reg = rtl818x_ioread8(priv, &priv->map->CW_CONF); + + /* CW is not on per-packet basis. + * in rtl8185 the CW_VALUE reg is used. + * in rtl8187se the AC param regs are used. + */ + reg &= ~RTL818X_CW_CONF_PERPACKET_CW; + /* retry limit IS on per-packet basis. + * the short and long retry limit in TX_CONF + * reg are ignored + */ + reg |= RTL818X_CW_CONF_PERPACKET_RETRY; + rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg); + + reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL); + /* TX antenna and TX gain are not on per-packet basis. + * TX Antenna is selected by ANTSEL reg (RX in BB regs). + * TX gain is selected with CCK_TX_AGC and OFDM_TX_AGC regs + */ + reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN; + reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL; + reg |= RTL818X_TX_AGC_CTL_FEEDBACK_ANT; + rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg); + + /* disable early TX */ + rtl818x_iowrite8(priv, (u8 __iomem *)priv->map + 0xec, 0x3f); + } + + reg = rtl818x_ioread32(priv, &priv->map->TX_CONF); + reg |= (6 << 21 /* MAX TX DMA */) | + RTL818X_TX_CONF_NO_ICV; + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) + reg |= 1<<30; /* "duration procedure mode" */ + + if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) + reg &= ~RTL818X_TX_CONF_PROBE_DTS; + else + reg &= ~RTL818X_TX_CONF_HW_SEQNUM; + + reg &= ~RTL818X_TX_CONF_DISCW; + + /* different meaning, same value on both rtl8185 and rtl8180 */ + reg &= ~RTL818X_TX_CONF_SAT_HWPLCP; + + rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg); + + reg = rtl818x_ioread8(priv, &priv->map->CMD); + reg |= RTL818X_CMD_RX_ENABLE; + reg |= RTL818X_CMD_TX_ENABLE; + rtl818x_iowrite8(priv, &priv->map->CMD, reg); + + return 0; + + err_free_rings: + rtl8180_free_rx_ring(dev); + for (i = 0; i < (dev->queues + 1); i++) + if (priv->tx_ring[i].desc) + rtl8180_free_tx_ring(dev, i); + + return ret; +} + +static void rtl8180_stop(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + u8 reg; + int i; + + rtl8180_int_disable(dev); + + reg = rtl818x_ioread8(priv, &priv->map->CMD); + reg &= ~RTL818X_CMD_TX_ENABLE; + reg &= ~RTL818X_CMD_RX_ENABLE; + rtl818x_iowrite8(priv, &priv->map->CMD, reg); + + priv->rf->stop(dev); + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); + reg = rtl818x_ioread8(priv, &priv->map->CONFIG4); + rtl818x_iowrite8(priv, &priv->map->CONFIG4, reg | RTL818X_CONFIG4_VCOOFF); + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); + + free_irq(priv->pdev->irq, dev); + + rtl8180_free_rx_ring(dev); + for (i = 0; i < (dev->queues + 1); i++) + rtl8180_free_tx_ring(dev, i); +} + +static u64 rtl8180_get_tsf(struct ieee80211_hw *dev, + struct ieee80211_vif *vif) +{ + struct rtl8180_priv *priv = dev->priv; + + return rtl818x_ioread32(priv, &priv->map->TSFT[0]) | + (u64)(rtl818x_ioread32(priv, &priv->map->TSFT[1])) << 32; +} + +static void rtl8180_beacon_work(struct work_struct *work) +{ + struct rtl8180_vif *vif_priv = + container_of(work, struct rtl8180_vif, beacon_work.work); + struct ieee80211_vif *vif = + container_of((void *)vif_priv, struct ieee80211_vif, drv_priv); + struct ieee80211_hw *dev = vif_priv->dev; + struct ieee80211_mgmt *mgmt; + struct sk_buff *skb; + + /* don't overflow the tx ring */ + if (ieee80211_queue_stopped(dev, 0)) + goto resched; + + /* grab a fresh beacon */ + skb = ieee80211_beacon_get(dev, vif); + if (!skb) + goto resched; + + /* + * update beacon timestamp w/ TSF value + * TODO: make hardware update beacon timestamp + */ + mgmt = (struct ieee80211_mgmt *)skb->data; + mgmt->u.beacon.timestamp = cpu_to_le64(rtl8180_get_tsf(dev, vif)); + + /* TODO: use actual beacon queue */ + skb_set_queue_mapping(skb, 0); + + rtl8180_tx(dev, NULL, skb); + +resched: + /* + * schedule next beacon + * TODO: use hardware support for beacon timing + */ + schedule_delayed_work(&vif_priv->beacon_work, + usecs_to_jiffies(1024 * vif->bss_conf.beacon_int)); +} + +static int rtl8180_add_interface(struct ieee80211_hw *dev, + struct ieee80211_vif *vif) +{ + struct rtl8180_priv *priv = dev->priv; + struct rtl8180_vif *vif_priv; + + /* + * We only support one active interface at a time. + */ + if (priv->vif) + return -EBUSY; + + switch (vif->type) { + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_ADHOC: + break; + default: + return -EOPNOTSUPP; + } + + priv->vif = vif; + + /* Initialize driver private area */ + vif_priv = (struct rtl8180_vif *)&vif->drv_priv; + vif_priv->dev = dev; + INIT_DELAYED_WORK(&vif_priv->beacon_work, rtl8180_beacon_work); + vif_priv->enable_beacon = false; + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); + rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->MAC[0], + le32_to_cpu(*(__le32 *)vif->addr)); + rtl818x_iowrite16(priv, (__le16 __iomem *)&priv->map->MAC[4], + le16_to_cpu(*(__le16 *)(vif->addr + 4))); + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); + + return 0; +} + +static void rtl8180_remove_interface(struct ieee80211_hw *dev, + struct ieee80211_vif *vif) +{ + struct rtl8180_priv *priv = dev->priv; + priv->vif = NULL; +} + +static int rtl8180_config(struct ieee80211_hw *dev, u32 changed) +{ + struct rtl8180_priv *priv = dev->priv; + struct ieee80211_conf *conf = &dev->conf; + + priv->rf->set_chan(dev, conf); + + return 0; +} + +static void rtl8187se_conf_ac_parm(struct ieee80211_hw *dev, u8 queue) +{ + const struct ieee80211_tx_queue_params *params; + struct rtl8180_priv *priv = dev->priv; + + /* hw value */ + u32 ac_param; + + u8 aifs; + u8 txop; + u8 cw_min, cw_max; + + params = &priv->queue_param[queue]; + + cw_min = fls(params->cw_min); + cw_max = fls(params->cw_max); + + aifs = 10 + params->aifs * priv->slot_time; + + /* TODO: check if txop HW is in us (mult by 32) */ + txop = params->txop; + + ac_param = txop << AC_PARAM_TXOP_LIMIT_SHIFT | + cw_max << AC_PARAM_ECW_MAX_SHIFT | + cw_min << AC_PARAM_ECW_MIN_SHIFT | + aifs << AC_PARAM_AIFS_SHIFT; + + switch (queue) { + case IEEE80211_AC_BK: + rtl818x_iowrite32(priv, &priv->map->AC_BK_PARAM, ac_param); + break; + case IEEE80211_AC_BE: + rtl818x_iowrite32(priv, &priv->map->AC_BE_PARAM, ac_param); + break; + case IEEE80211_AC_VI: + rtl818x_iowrite32(priv, &priv->map->AC_VI_PARAM, ac_param); + break; + case IEEE80211_AC_VO: + rtl818x_iowrite32(priv, &priv->map->AC_VO_PARAM, ac_param); + break; + } +} + +static int rtl8180_conf_tx(struct ieee80211_hw *dev, + struct ieee80211_vif *vif, u16 queue, + const struct ieee80211_tx_queue_params *params) +{ + struct rtl8180_priv *priv = dev->priv; + u8 cw_min, cw_max; + + /* nothing to do ? */ + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180) + return 0; + + cw_min = fls(params->cw_min); + cw_max = fls(params->cw_max); + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) { + priv->queue_param[queue] = *params; + rtl8187se_conf_ac_parm(dev, queue); + } else + rtl818x_iowrite8(priv, &priv->map->CW_VAL, + (cw_max << 4) | cw_min); + return 0; +} + +static void rtl8180_conf_erp(struct ieee80211_hw *dev, + struct ieee80211_bss_conf *info) +{ + struct rtl8180_priv *priv = dev->priv; + u8 sifs, difs; + int eifs; + u8 hw_eifs; + + /* TODO: should we do something ? */ + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180) + return; + + /* I _hope_ this means 10uS for the HW. + * In reference code it is 0x22 for + * both rtl8187L and rtl8187SE + */ + sifs = 0x22; + + if (info->use_short_slot) + priv->slot_time = 9; + else + priv->slot_time = 20; + + /* 10 is SIFS time in uS */ + difs = 10 + 2 * priv->slot_time; + eifs = 10 + difs + priv->ack_time; + + /* HW should use 4uS units for EIFS (I'm sure for rtl8185)*/ + hw_eifs = DIV_ROUND_UP(eifs, 4); + + + rtl818x_iowrite8(priv, &priv->map->SLOT, priv->slot_time); + rtl818x_iowrite8(priv, &priv->map->SIFS, sifs); + rtl818x_iowrite8(priv, &priv->map->DIFS, difs); + + /* from reference code. set ack timeout reg = eifs reg */ + rtl818x_iowrite8(priv, &priv->map->CARRIER_SENSE_COUNTER, hw_eifs); + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) + rtl818x_iowrite8(priv, &priv->map->EIFS_8187SE, hw_eifs); + else if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8185) { + /* rtl8187/rtl8185 HW bug. After EIFS is elapsed, + * the HW still wait for DIFS. + * HW uses 4uS units for EIFS. + */ + hw_eifs = DIV_ROUND_UP(eifs - difs, 4); + + rtl818x_iowrite8(priv, &priv->map->EIFS, hw_eifs); + } +} + +static void rtl8180_bss_info_changed(struct ieee80211_hw *dev, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *info, + u32 changed) +{ + struct rtl8180_priv *priv = dev->priv; + struct rtl8180_vif *vif_priv; + int i; + u8 reg; + + vif_priv = (struct rtl8180_vif *)&vif->drv_priv; + + if (changed & BSS_CHANGED_BSSID) { + rtl818x_iowrite16(priv, (__le16 __iomem *)&priv->map->BSSID[0], + le16_to_cpu(*(__le16 *)info->bssid)); + rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->BSSID[2], + le32_to_cpu(*(__le32 *)(info->bssid + 2))); + + if (is_valid_ether_addr(info->bssid)) { + if (vif->type == NL80211_IFTYPE_ADHOC) + reg = RTL818X_MSR_ADHOC; + else + reg = RTL818X_MSR_INFRA; + } else + reg = RTL818X_MSR_NO_LINK; + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) + reg |= RTL818X_MSR_ENEDCA; + + rtl818x_iowrite8(priv, &priv->map->MSR, reg); + } + + if (changed & BSS_CHANGED_BASIC_RATES) + rtl8180_conf_basic_rates(dev, info->basic_rates); + + if (changed & (BSS_CHANGED_ERP_SLOT | BSS_CHANGED_ERP_PREAMBLE)) { + + /* when preamble changes, acktime duration changes, and erp must + * be recalculated. ACK time is calculated at lowest rate. + * Since mac80211 include SIFS time we remove it (-10) + */ + priv->ack_time = + le16_to_cpu(ieee80211_generic_frame_duration(dev, + priv->vif, + NL80211_BAND_2GHZ, 10, + &priv->rates[0])) - 10; + + rtl8180_conf_erp(dev, info); + + /* mac80211 supplies aifs_n to driver and calls + * conf_tx callback whether aifs_n changes, NOT + * when aifs changes. + * Aifs should be recalculated if slot changes. + */ + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) { + for (i = 0; i < 4; i++) + rtl8187se_conf_ac_parm(dev, i); + } + } + + if (changed & BSS_CHANGED_BEACON_ENABLED) + vif_priv->enable_beacon = info->enable_beacon; + + if (changed & (BSS_CHANGED_BEACON_ENABLED | BSS_CHANGED_BEACON)) { + cancel_delayed_work_sync(&vif_priv->beacon_work); + if (vif_priv->enable_beacon) + schedule_work(&vif_priv->beacon_work.work); + } +} + +static u64 rtl8180_prepare_multicast(struct ieee80211_hw *dev, + struct netdev_hw_addr_list *mc_list) +{ + return netdev_hw_addr_list_count(mc_list); +} + +static void rtl8180_configure_filter(struct ieee80211_hw *dev, + unsigned int changed_flags, + unsigned int *total_flags, + u64 multicast) +{ + struct rtl8180_priv *priv = dev->priv; + + if (changed_flags & FIF_FCSFAIL) + priv->rx_conf ^= RTL818X_RX_CONF_FCS; + if (changed_flags & FIF_CONTROL) + priv->rx_conf ^= RTL818X_RX_CONF_CTRL; + if (changed_flags & FIF_OTHER_BSS) + priv->rx_conf ^= RTL818X_RX_CONF_MONITOR; + if (*total_flags & FIF_ALLMULTI || multicast > 0) + priv->rx_conf |= RTL818X_RX_CONF_MULTICAST; + else + priv->rx_conf &= ~RTL818X_RX_CONF_MULTICAST; + + *total_flags = 0; + + if (priv->rx_conf & RTL818X_RX_CONF_FCS) + *total_flags |= FIF_FCSFAIL; + if (priv->rx_conf & RTL818X_RX_CONF_CTRL) + *total_flags |= FIF_CONTROL; + if (priv->rx_conf & RTL818X_RX_CONF_MONITOR) + *total_flags |= FIF_OTHER_BSS; + if (priv->rx_conf & RTL818X_RX_CONF_MULTICAST) + *total_flags |= FIF_ALLMULTI; + + rtl818x_iowrite32(priv, &priv->map->RX_CONF, priv->rx_conf); +} + +static const struct ieee80211_ops rtl8180_ops = { + .tx = rtl8180_tx, + .start = rtl8180_start, + .stop = rtl8180_stop, + .add_interface = rtl8180_add_interface, + .remove_interface = rtl8180_remove_interface, + .config = rtl8180_config, + .bss_info_changed = rtl8180_bss_info_changed, + .conf_tx = rtl8180_conf_tx, + .prepare_multicast = rtl8180_prepare_multicast, + .configure_filter = rtl8180_configure_filter, + .get_tsf = rtl8180_get_tsf, +}; + +static void rtl8180_eeprom_register_read(struct eeprom_93cx6 *eeprom) +{ + struct rtl8180_priv *priv = eeprom->data; + u8 reg = rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + + eeprom->reg_data_in = reg & RTL818X_EEPROM_CMD_WRITE; + eeprom->reg_data_out = reg & RTL818X_EEPROM_CMD_READ; + eeprom->reg_data_clock = reg & RTL818X_EEPROM_CMD_CK; + eeprom->reg_chip_select = reg & RTL818X_EEPROM_CMD_CS; +} + +static void rtl8180_eeprom_register_write(struct eeprom_93cx6 *eeprom) +{ + struct rtl8180_priv *priv = eeprom->data; + u8 reg = 2 << 6; + + if (eeprom->reg_data_in) + reg |= RTL818X_EEPROM_CMD_WRITE; + if (eeprom->reg_data_out) + reg |= RTL818X_EEPROM_CMD_READ; + if (eeprom->reg_data_clock) + reg |= RTL818X_EEPROM_CMD_CK; + if (eeprom->reg_chip_select) + reg |= RTL818X_EEPROM_CMD_CS; + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, reg); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(10); +} + +static void rtl8180_eeprom_read(struct rtl8180_priv *priv) +{ + struct eeprom_93cx6 eeprom; + int eeprom_cck_table_adr; + u16 eeprom_val; + int i; + + eeprom.data = priv; + eeprom.register_read = rtl8180_eeprom_register_read; + eeprom.register_write = rtl8180_eeprom_register_write; + if (rtl818x_ioread32(priv, &priv->map->RX_CONF) & (1 << 6)) + eeprom.width = PCI_EEPROM_WIDTH_93C66; + else + eeprom.width = PCI_EEPROM_WIDTH_93C46; + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, + RTL818X_EEPROM_CMD_PROGRAM); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(10); + + eeprom_93cx6_read(&eeprom, 0x06, &eeprom_val); + eeprom_val &= 0xFF; + priv->rf_type = eeprom_val; + + eeprom_93cx6_read(&eeprom, 0x17, &eeprom_val); + priv->csthreshold = eeprom_val >> 8; + + eeprom_93cx6_multiread(&eeprom, 0x7, (__le16 *)priv->mac_addr, 3); + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) + eeprom_cck_table_adr = 0x30; + else + eeprom_cck_table_adr = 0x10; + + /* CCK TX power */ + for (i = 0; i < 14; i += 2) { + u16 txpwr; + eeprom_93cx6_read(&eeprom, eeprom_cck_table_adr + (i >> 1), + &txpwr); + priv->channels[i].hw_value = txpwr & 0xFF; + priv->channels[i + 1].hw_value = txpwr >> 8; + } + + /* OFDM TX power */ + if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) { + for (i = 0; i < 14; i += 2) { + u16 txpwr; + eeprom_93cx6_read(&eeprom, 0x20 + (i >> 1), &txpwr); + priv->channels[i].hw_value |= (txpwr & 0xFF) << 8; + priv->channels[i + 1].hw_value |= txpwr & 0xFF00; + } + } + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180) { + __le32 anaparam; + eeprom_93cx6_multiread(&eeprom, 0xD, (__le16 *)&anaparam, 2); + priv->anaparam = le32_to_cpu(anaparam); + eeprom_93cx6_read(&eeprom, 0x19, &priv->rfparam); + } + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) { + eeprom_93cx6_read(&eeprom, 0x3F, &eeprom_val); + priv->antenna_diversity_en = !!(eeprom_val & 0x100); + priv->antenna_diversity_default = (eeprom_val & 0xC00) == 0x400; + + eeprom_93cx6_read(&eeprom, 0x7C, &eeprom_val); + priv->xtal_out = eeprom_val & 0xF; + priv->xtal_in = (eeprom_val & 0xF0) >> 4; + priv->xtal_cal = !!(eeprom_val & 0x1000); + priv->thermal_meter_val = (eeprom_val & 0xF00) >> 8; + priv->thermal_meter_en = !!(eeprom_val & 0x2000); + } + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, + RTL818X_EEPROM_CMD_NORMAL); +} + +static int rtl8180_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct ieee80211_hw *dev; + struct rtl8180_priv *priv; + unsigned long mem_len; + unsigned int io_len; + int err; + const char *chip_name, *rf_name = NULL; + u32 reg; + + err = pci_enable_device(pdev); + if (err) { + printk(KERN_ERR "%s (rtl8180): Cannot enable new PCI device\n", + pci_name(pdev)); + return err; + } + + err = pci_request_regions(pdev, KBUILD_MODNAME); + if (err) { + printk(KERN_ERR "%s (rtl8180): Cannot obtain PCI resources\n", + pci_name(pdev)); + goto err_disable_dev; + } + + io_len = pci_resource_len(pdev, 0); + mem_len = pci_resource_len(pdev, 1); + + if (mem_len < sizeof(struct rtl818x_csr) || + io_len < sizeof(struct rtl818x_csr)) { + printk(KERN_ERR "%s (rtl8180): Too short PCI resources\n", + pci_name(pdev)); + err = -ENOMEM; + goto err_free_reg; + } + + if ((err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) || + (err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)))) { + printk(KERN_ERR "%s (rtl8180): No suitable DMA available\n", + pci_name(pdev)); + goto err_free_reg; + } + + pci_set_master(pdev); + + dev = ieee80211_alloc_hw(sizeof(*priv), &rtl8180_ops); + if (!dev) { + printk(KERN_ERR "%s (rtl8180): ieee80211 alloc failed\n", + pci_name(pdev)); + err = -ENOMEM; + goto err_free_reg; + } + + priv = dev->priv; + priv->pdev = pdev; + + dev->max_rates = 1; + SET_IEEE80211_DEV(dev, &pdev->dev); + pci_set_drvdata(pdev, dev); + + priv->map_pio = false; + priv->map = pci_iomap(pdev, 1, mem_len); + if (!priv->map) { + priv->map = pci_iomap(pdev, 0, io_len); + priv->map_pio = true; + } + + if (!priv->map) { + dev_err(&pdev->dev, "Cannot map device memory/PIO\n"); + err = -ENOMEM; + goto err_free_dev; + } + + BUILD_BUG_ON(sizeof(priv->channels) != sizeof(rtl818x_channels)); + BUILD_BUG_ON(sizeof(priv->rates) != sizeof(rtl818x_rates)); + + memcpy(priv->channels, rtl818x_channels, sizeof(rtl818x_channels)); + memcpy(priv->rates, rtl818x_rates, sizeof(rtl818x_rates)); + + priv->band.band = NL80211_BAND_2GHZ; + priv->band.channels = priv->channels; + priv->band.n_channels = ARRAY_SIZE(rtl818x_channels); + priv->band.bitrates = priv->rates; + priv->band.n_bitrates = 4; + dev->wiphy->bands[NL80211_BAND_2GHZ] = &priv->band; + + ieee80211_hw_set(dev, HOST_BROADCAST_PS_BUFFERING); + ieee80211_hw_set(dev, RX_INCLUDES_FCS); + + dev->vif_data_size = sizeof(struct rtl8180_vif); + dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_ADHOC); + dev->max_signal = 65; + + reg = rtl818x_ioread32(priv, &priv->map->TX_CONF); + reg &= RTL818X_TX_CONF_HWVER_MASK; + switch (reg) { + case RTL818X_TX_CONF_R8180_ABCD: + chip_name = "RTL8180"; + priv->chip_family = RTL818X_CHIP_FAMILY_RTL8180; + break; + + case RTL818X_TX_CONF_R8180_F: + chip_name = "RTL8180vF"; + priv->chip_family = RTL818X_CHIP_FAMILY_RTL8180; + break; + + case RTL818X_TX_CONF_R8185_ABC: + chip_name = "RTL8185"; + priv->chip_family = RTL818X_CHIP_FAMILY_RTL8185; + break; + + case RTL818X_TX_CONF_R8185_D: + chip_name = "RTL8185vD"; + priv->chip_family = RTL818X_CHIP_FAMILY_RTL8185; + break; + + case RTL818X_TX_CONF_RTL8187SE: + chip_name = "RTL8187SE"; + if (priv->map_pio) { + dev_err(&pdev->dev, + "MMIO failed. PIO not supported on RTL8187SE\n"); + err = -ENOMEM; + goto err_iounmap; + } + priv->chip_family = RTL818X_CHIP_FAMILY_RTL8187SE; + break; + + default: + printk(KERN_ERR "%s (rtl8180): Unknown chip! (0x%x)\n", + pci_name(pdev), reg >> 25); + err = -ENODEV; + goto err_iounmap; + } + + /* we declare to MAC80211 all the queues except for beacon queue + * that will be eventually handled by DRV. + * TX rings are arranged in such a way that lower is the IDX, + * higher is the priority, in order to achieve direct mapping + * with mac80211, however the beacon queue is an exception and it + * is mapped on the highst tx ring IDX. + */ + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) + dev->queues = RTL8187SE_NR_TX_QUEUES - 1; + else + dev->queues = RTL8180_NR_TX_QUEUES - 1; + + if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) { + priv->band.n_bitrates = ARRAY_SIZE(rtl818x_rates); + pci_try_set_mwi(pdev); + } + + if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) + ieee80211_hw_set(dev, SIGNAL_DBM); + else + ieee80211_hw_set(dev, SIGNAL_UNSPEC); + + wiphy_ext_feature_set(dev->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST); + + rtl8180_eeprom_read(priv); + + switch (priv->rf_type) { + case 1: rf_name = "Intersil"; + break; + case 2: rf_name = "RFMD"; + break; + case 3: priv->rf = &sa2400_rf_ops; + break; + case 4: priv->rf = &max2820_rf_ops; + break; + case 5: priv->rf = &grf5101_rf_ops; + break; + case 9: + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) + priv->rf = rtl8187se_detect_rf(dev); + else + priv->rf = rtl8180_detect_rf(dev); + break; + case 10: + rf_name = "RTL8255"; + break; + default: + printk(KERN_ERR "%s (rtl8180): Unknown RF! (0x%x)\n", + pci_name(pdev), priv->rf_type); + err = -ENODEV; + goto err_iounmap; + } + + if (!priv->rf) { + printk(KERN_ERR "%s (rtl8180): %s RF frontend not supported!\n", + pci_name(pdev), rf_name); + err = -ENODEV; + goto err_iounmap; + } + + if (!is_valid_ether_addr(priv->mac_addr)) { + printk(KERN_WARNING "%s (rtl8180): Invalid hwaddr! Using" + " randomly generated MAC addr\n", pci_name(pdev)); + eth_random_addr(priv->mac_addr); + } + SET_IEEE80211_PERM_ADDR(dev, priv->mac_addr); + + spin_lock_init(&priv->lock); + + err = ieee80211_register_hw(dev); + if (err) { + printk(KERN_ERR "%s (rtl8180): Cannot register device\n", + pci_name(pdev)); + goto err_iounmap; + } + + wiphy_info(dev->wiphy, "hwaddr %pm, %s + %s\n", + priv->mac_addr, chip_name, priv->rf->name); + + return 0; + + err_iounmap: + pci_iounmap(pdev, priv->map); + + err_free_dev: + ieee80211_free_hw(dev); + + err_free_reg: + pci_release_regions(pdev); + + err_disable_dev: + pci_disable_device(pdev); + return err; +} + +static void rtl8180_remove(struct pci_dev *pdev) +{ + struct ieee80211_hw *dev = pci_get_drvdata(pdev); + struct rtl8180_priv *priv; + + if (!dev) + return; + + ieee80211_unregister_hw(dev); + + priv = dev->priv; + + pci_iounmap(pdev, priv->map); + pci_release_regions(pdev); + pci_disable_device(pdev); + ieee80211_free_hw(dev); +} + +#define rtl8180_suspend NULL +#define rtl8180_resume NULL + +static SIMPLE_DEV_PM_OPS(rtl8180_pm_ops, rtl8180_suspend, rtl8180_resume); + +static struct pci_driver rtl8180_driver = { + .name = KBUILD_MODNAME, + .id_table = rtl8180_table, + .probe = rtl8180_probe, + .remove = rtl8180_remove, + .driver.pm = &rtl8180_pm_ops, +}; + +module_pci_driver(rtl8180_driver); diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/grf5101.c b/drivers/net/wireless/realtek/rtl818x/rtl8180/grf5101.c new file mode 100644 index 000000000..fda6ba796 --- /dev/null +++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/grf5101.c @@ -0,0 +1,187 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/* + * Radio tuning for GCT GRF5101 on RTL8180 + * + * Copyright 2007 Andrea Merello <andrea.merello@gmail.com> + * + * Code from the BSD driver and the rtl8181 project have been + * very useful to understand certain things + * + * I want to thanks the Authors of such projects and the Ndiswrapper + * project Authors. + * + * A special Big Thanks also is for all people who donated me cards, + * making possible the creation of the original rtl8180 driver + * from which this code is derived! + */ + +#include <linux/pci.h> +#include <linux/delay.h> +#include <net/mac80211.h> + +#include "rtl8180.h" +#include "grf5101.h" + +static const int grf5101_encode[] = { + 0x0, 0x8, 0x4, 0xC, + 0x2, 0xA, 0x6, 0xE, + 0x1, 0x9, 0x5, 0xD, + 0x3, 0xB, 0x7, 0xF +}; + +static void write_grf5101(struct ieee80211_hw *dev, u8 addr, u32 data) +{ + struct rtl8180_priv *priv = dev->priv; + u32 phy_config; + + phy_config = grf5101_encode[(data >> 8) & 0xF]; + phy_config |= grf5101_encode[(data >> 4) & 0xF] << 4; + phy_config |= grf5101_encode[data & 0xF] << 8; + phy_config |= grf5101_encode[(addr >> 1) & 0xF] << 12; + phy_config |= (addr & 1) << 16; + phy_config |= grf5101_encode[(data & 0xf000) >> 12] << 24; + + /* MAC will bang bits to the chip */ + phy_config |= 0x90000000; + + rtl818x_iowrite32(priv, + (__le32 __iomem *) &priv->map->RFPinsOutput, phy_config); + + msleep(3); +} + +static void grf5101_write_phy_antenna(struct ieee80211_hw *dev, short chan) +{ + struct rtl8180_priv *priv = dev->priv; + u8 ant = GRF5101_ANTENNA; + + if (priv->rfparam & RF_PARAM_ANTBDEFAULT) + ant |= BB_ANTENNA_B; + + if (chan == 14) + ant |= BB_ANTATTEN_CHAN14; + + rtl8180_write_phy(dev, 0x10, ant); +} + +static u8 grf5101_rf_calc_rssi(u8 agc, u8 sq) +{ + if (agc > 60) + return 65; + + /* TODO(?): just return agc (or agc + 5) to avoid mult / div */ + return 65 * agc / 60; +} + +static void grf5101_rf_set_channel(struct ieee80211_hw *dev, + struct ieee80211_conf *conf) +{ + struct rtl8180_priv *priv = dev->priv; + int channel = + ieee80211_frequency_to_channel(conf->chandef.chan->center_freq); + u32 txpw = priv->channels[channel - 1].hw_value & 0xFF; + u32 chan = channel - 1; + + /* set TX power */ + write_grf5101(dev, 0x15, 0x0); + write_grf5101(dev, 0x06, txpw); + write_grf5101(dev, 0x15, 0x10); + write_grf5101(dev, 0x15, 0x0); + + /* set frequency */ + write_grf5101(dev, 0x07, 0x0); + write_grf5101(dev, 0x0B, chan); + write_grf5101(dev, 0x07, 0x1000); + + grf5101_write_phy_antenna(dev, channel); +} + +static void grf5101_rf_stop(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + u32 anaparam; + + anaparam = priv->anaparam; + anaparam &= 0x000fffff; + anaparam |= 0x3f900000; + rtl8180_set_anaparam(priv, anaparam); + + write_grf5101(dev, 0x07, 0x0); + write_grf5101(dev, 0x1f, 0x45); + write_grf5101(dev, 0x1f, 0x5); + write_grf5101(dev, 0x00, 0x8e4); +} + +static void grf5101_rf_init(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + + rtl8180_set_anaparam(priv, priv->anaparam); + + write_grf5101(dev, 0x1f, 0x0); + write_grf5101(dev, 0x1f, 0x0); + write_grf5101(dev, 0x1f, 0x40); + write_grf5101(dev, 0x1f, 0x60); + write_grf5101(dev, 0x1f, 0x61); + write_grf5101(dev, 0x1f, 0x61); + write_grf5101(dev, 0x00, 0xae4); + write_grf5101(dev, 0x1f, 0x1); + write_grf5101(dev, 0x1f, 0x41); + write_grf5101(dev, 0x1f, 0x61); + + write_grf5101(dev, 0x01, 0x1a23); + write_grf5101(dev, 0x02, 0x4971); + write_grf5101(dev, 0x03, 0x41de); + write_grf5101(dev, 0x04, 0x2d80); + write_grf5101(dev, 0x05, 0x68ff); /* 0x61ff original value */ + write_grf5101(dev, 0x06, 0x0); + write_grf5101(dev, 0x07, 0x0); + write_grf5101(dev, 0x08, 0x7533); + write_grf5101(dev, 0x09, 0xc401); + write_grf5101(dev, 0x0a, 0x0); + write_grf5101(dev, 0x0c, 0x1c7); + write_grf5101(dev, 0x0d, 0x29d3); + write_grf5101(dev, 0x0e, 0x2e8); + write_grf5101(dev, 0x10, 0x192); + write_grf5101(dev, 0x11, 0x248); + write_grf5101(dev, 0x12, 0x0); + write_grf5101(dev, 0x13, 0x20c4); + write_grf5101(dev, 0x14, 0xf4fc); + write_grf5101(dev, 0x15, 0x0); + write_grf5101(dev, 0x16, 0x1500); + + write_grf5101(dev, 0x07, 0x1000); + + /* baseband configuration */ + rtl8180_write_phy(dev, 0, 0xa8); + rtl8180_write_phy(dev, 3, 0x0); + rtl8180_write_phy(dev, 4, 0xc0); + rtl8180_write_phy(dev, 5, 0x90); + rtl8180_write_phy(dev, 6, 0x1e); + rtl8180_write_phy(dev, 7, 0x64); + + grf5101_write_phy_antenna(dev, 1); + + rtl8180_write_phy(dev, 0x11, 0x88); + + if (rtl818x_ioread8(priv, &priv->map->CONFIG2) & + RTL818X_CONFIG2_ANTENNA_DIV) + rtl8180_write_phy(dev, 0x12, 0xc0); /* enable ant diversity */ + else + rtl8180_write_phy(dev, 0x12, 0x40); /* disable ant diversity */ + + rtl8180_write_phy(dev, 0x13, 0x90 | priv->csthreshold); + + rtl8180_write_phy(dev, 0x19, 0x0); + rtl8180_write_phy(dev, 0x1a, 0xa0); + rtl8180_write_phy(dev, 0x1b, 0x44); +} + +const struct rtl818x_rf_ops grf5101_rf_ops = { + .name = "GCT", + .init = grf5101_rf_init, + .stop = grf5101_rf_stop, + .set_chan = grf5101_rf_set_channel, + .calc_rssi = grf5101_rf_calc_rssi, +}; diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/grf5101.h b/drivers/net/wireless/realtek/rtl818x/rtl8180/grf5101.h new file mode 100644 index 000000000..91ff3185c --- /dev/null +++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/grf5101.h @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +#ifndef RTL8180_GRF5101_H +#define RTL8180_GRF5101_H + +/* + * Radio tuning for GCT GRF5101 on RTL8180 + * + * Copyright 2007 Andrea Merello <andrea.merello@gmail.com> + * + * Code from the BSD driver and the rtl8181 project have been + * very useful to understand certain things + * + * I want to thanks the Authors of such projects and the Ndiswrapper + * project Authors. + * + * A special Big Thanks also is for all people who donated me cards, + * making possible the creation of the original rtl8180 driver + * from which this code is derived! + */ + +#define GRF5101_ANTENNA 0xA3 + +extern const struct rtl818x_rf_ops grf5101_rf_ops; + +#endif /* RTL8180_GRF5101_H */ diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/max2820.c b/drivers/net/wireless/realtek/rtl818x/rtl8180/max2820.c new file mode 100644 index 000000000..27d04fec3 --- /dev/null +++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/max2820.c @@ -0,0 +1,165 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Radio tuning for Maxim max2820 on RTL8180 + * + * Copyright 2007 Andrea Merello <andrea.merello@gmail.com> + * + * Code from the BSD driver and the rtl8181 project have been + * very useful to understand certain things + * + * I want to thanks the Authors of such projects and the Ndiswrapper + * project Authors. + * + * A special Big Thanks also is for all people who donated me cards, + * making possible the creation of the original rtl8180 driver + * from which this code is derived! + */ + +#include <linux/pci.h> +#include <linux/delay.h> +#include <net/mac80211.h> + +#include "rtl8180.h" +#include "max2820.h" + +static const u32 max2820_chan[] = { + 12, /* CH 1 */ + 17, + 22, + 27, + 32, + 37, + 42, + 47, + 52, + 57, + 62, + 67, + 72, + 84, /* CH 14 */ +}; + +static void write_max2820(struct ieee80211_hw *dev, u8 addr, u32 data) +{ + struct rtl8180_priv *priv = dev->priv; + u32 phy_config; + + phy_config = 0x90 + (data & 0xf); + phy_config <<= 16; + phy_config += addr; + phy_config <<= 8; + phy_config += (data >> 4) & 0xff; + + rtl818x_iowrite32(priv, + (__le32 __iomem *) &priv->map->RFPinsOutput, phy_config); + + msleep(1); +} + +static void max2820_write_phy_antenna(struct ieee80211_hw *dev, short chan) +{ + struct rtl8180_priv *priv = dev->priv; + u8 ant; + + ant = MAXIM_ANTENNA; + if (priv->rfparam & RF_PARAM_ANTBDEFAULT) + ant |= BB_ANTENNA_B; + if (chan == 14) + ant |= BB_ANTATTEN_CHAN14; + + rtl8180_write_phy(dev, 0x10, ant); +} + +static u8 max2820_rf_calc_rssi(u8 agc, u8 sq) +{ + bool odd; + + odd = !!(agc & 1); + + agc >>= 1; + if (odd) + agc += 76; + else + agc += 66; + + /* TODO: change addends above to avoid mult / div below */ + return 65 * agc / 100; +} + +static void max2820_rf_set_channel(struct ieee80211_hw *dev, + struct ieee80211_conf *conf) +{ + struct rtl8180_priv *priv = dev->priv; + int channel = conf ? + ieee80211_frequency_to_channel(conf->chandef.chan->center_freq) : 1; + unsigned int chan_idx = channel - 1; + u32 txpw = priv->channels[chan_idx].hw_value & 0xFF; + u32 chan = max2820_chan[chan_idx]; + + /* While philips SA2400 drive the PA bias from + * sa2400, for MAXIM we do this directly from BB */ + rtl8180_write_phy(dev, 3, txpw); + + max2820_write_phy_antenna(dev, channel); + write_max2820(dev, 3, chan); +} + +static void max2820_rf_stop(struct ieee80211_hw *dev) +{ + rtl8180_write_phy(dev, 3, 0x8); + write_max2820(dev, 1, 0); +} + + +static void max2820_rf_init(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + + /* MAXIM from netbsd driver */ + write_max2820(dev, 0, 0x007); /* test mode as indicated in datasheet */ + write_max2820(dev, 1, 0x01e); /* enable register */ + write_max2820(dev, 2, 0x001); /* synt register */ + + max2820_rf_set_channel(dev, NULL); + + write_max2820(dev, 4, 0x313); /* rx register */ + + /* PA is driven directly by the BB, we keep the MAXIM bias + * at the highest value in case that setting it to lower + * values may introduce some further attenuation somewhere.. + */ + write_max2820(dev, 5, 0x00f); + + /* baseband configuration */ + rtl8180_write_phy(dev, 0, 0x88); /* sys1 */ + rtl8180_write_phy(dev, 3, 0x08); /* txagc */ + rtl8180_write_phy(dev, 4, 0xf8); /* lnadet */ + rtl8180_write_phy(dev, 5, 0x90); /* ifagcinit */ + rtl8180_write_phy(dev, 6, 0x1a); /* ifagclimit */ + rtl8180_write_phy(dev, 7, 0x64); /* ifagcdet */ + + max2820_write_phy_antenna(dev, 1); + + rtl8180_write_phy(dev, 0x11, 0x88); /* trl */ + + if (rtl818x_ioread8(priv, &priv->map->CONFIG2) & + RTL818X_CONFIG2_ANTENNA_DIV) + rtl8180_write_phy(dev, 0x12, 0xc7); + else + rtl8180_write_phy(dev, 0x12, 0x47); + + rtl8180_write_phy(dev, 0x13, 0x9b); + + rtl8180_write_phy(dev, 0x19, 0x0); /* CHESTLIM */ + rtl8180_write_phy(dev, 0x1a, 0x9f); /* CHSQLIM */ + + max2820_rf_set_channel(dev, NULL); +} + +const struct rtl818x_rf_ops max2820_rf_ops = { + .name = "Maxim", + .init = max2820_rf_init, + .stop = max2820_rf_stop, + .set_chan = max2820_rf_set_channel, + .calc_rssi = max2820_rf_calc_rssi, +}; diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/max2820.h b/drivers/net/wireless/realtek/rtl818x/rtl8180/max2820.h new file mode 100644 index 000000000..4cb800d2d --- /dev/null +++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/max2820.h @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +#ifndef RTL8180_MAX2820_H +#define RTL8180_MAX2820_H + +/* + * Radio tuning for Maxim max2820 on RTL8180 + * + * Copyright 2007 Andrea Merello <andrea.merello@gmail.com> + * + * Code from the BSD driver and the rtl8181 project have been + * very useful to understand certain things + * + * I want to thanks the Authors of such projects and the Ndiswrapper + * project Authors. + * + * A special Big Thanks also is for all people who donated me cards, + * making possible the creation of the original rtl8180 driver + * from which this code is derived! + */ + +#define MAXIM_ANTENNA 0xb3 + +extern const struct rtl818x_rf_ops max2820_rf_ops; + +#endif /* RTL8180_MAX2820_H */ diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8180.h b/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8180.h new file mode 100644 index 000000000..2ff00800d --- /dev/null +++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8180.h @@ -0,0 +1,186 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef RTL8180_H +#define RTL8180_H + +#include "rtl818x.h" + +#define MAX_RX_SIZE IEEE80211_MAX_RTS_THRESHOLD + +#define RF_PARAM_ANALOGPHY (1 << 0) +#define RF_PARAM_ANTBDEFAULT (1 << 1) +#define RF_PARAM_CARRIERSENSE1 (1 << 2) +#define RF_PARAM_CARRIERSENSE2 (1 << 3) + +#define BB_ANTATTEN_CHAN14 0x0C +#define BB_ANTENNA_B 0x40 + +#define BB_HOST_BANG (1 << 30) +#define BB_HOST_BANG_EN (1 << 2) +#define BB_HOST_BANG_CLK (1 << 1) +#define BB_HOST_BANG_DATA 1 + +#define ANAPARAM_TXDACOFF_SHIFT 27 +#define ANAPARAM_PWR0_SHIFT 28 +#define ANAPARAM_PWR0_MASK (0x07 << ANAPARAM_PWR0_SHIFT) +#define ANAPARAM_PWR1_SHIFT 20 +#define ANAPARAM_PWR1_MASK (0x7F << ANAPARAM_PWR1_SHIFT) + +/* rtl8180/rtl8185 have 3 queue + beacon queue. + * mac80211 can use just one, + beacon = 2 tot. + */ +#define RTL8180_NR_TX_QUEUES 2 + +/* rtl8187SE have 6 queues + beacon queues + * mac80211 can use 4 QoS data queue, + beacon = 5 tot + */ +#define RTL8187SE_NR_TX_QUEUES 5 + +/* for array static allocation, it is the max of above */ +#define RTL818X_NR_TX_QUEUES 5 + +struct rtl8180_tx_desc { + __le32 flags; + __le16 rts_duration; + __le16 plcp_len; + __le32 tx_buf; + union{ + __le32 frame_len; + struct { + __le16 frame_len_se; + __le16 frame_duration; + } __packed; + } __packed; + __le32 next_tx_desc; + u8 cw; + u8 retry_limit; + u8 agc; + u8 flags2; + /* rsvd for 8180/8185. + * valid for 8187se but we dont use it + */ + u32 reserved; + /* all rsvd for 8180/8185 */ + __le16 flags3; + __le16 frag_qsize; +} __packed; + +struct rtl818x_rx_cmd_desc { + __le32 flags; + u32 reserved; + __le32 rx_buf; +} __packed; + +struct rtl8180_rx_desc { + __le32 flags; + __le32 flags2; + __le64 tsft; + +} __packed; + +struct rtl8187se_rx_desc { + __le32 flags; + __le64 tsft; + __le32 flags2; + __le32 flags3; + u32 reserved[3]; +} __packed; + +struct rtl8180_tx_ring { + struct rtl8180_tx_desc *desc; + dma_addr_t dma; + unsigned int idx; + unsigned int entries; + struct sk_buff_head queue; +}; + +struct rtl8180_vif { + struct ieee80211_hw *dev; + + /* beaconing */ + struct delayed_work beacon_work; + bool enable_beacon; +}; + +struct rtl8180_priv { + /* common between rtl818x drivers */ + struct rtl818x_csr __iomem *map; + const struct rtl818x_rf_ops *rf; + struct ieee80211_vif *vif; + + /* rtl8180 driver specific */ + bool map_pio; + spinlock_t lock; + void *rx_ring; + u8 rx_ring_sz; + dma_addr_t rx_ring_dma; + unsigned int rx_idx; + struct sk_buff *rx_buf[32]; + struct rtl8180_tx_ring tx_ring[RTL818X_NR_TX_QUEUES]; + struct ieee80211_channel channels[14]; + struct ieee80211_rate rates[12]; + struct ieee80211_supported_band band; + struct ieee80211_tx_queue_params queue_param[4]; + struct pci_dev *pdev; + u32 rx_conf; + u8 slot_time; + u16 ack_time; + + enum { + RTL818X_CHIP_FAMILY_RTL8180, + RTL818X_CHIP_FAMILY_RTL8185, + RTL818X_CHIP_FAMILY_RTL8187SE, + } chip_family; + u32 anaparam; + u16 rfparam; + u8 csthreshold; + u8 mac_addr[ETH_ALEN]; + u8 rf_type; + u8 xtal_out; + u8 xtal_in; + u8 xtal_cal; + u8 thermal_meter_val; + u8 thermal_meter_en; + u8 antenna_diversity_en; + u8 antenna_diversity_default; + /* sequence # */ + u16 seqno; +}; + +void rtl8180_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data); +void rtl8180_set_anaparam(struct rtl8180_priv *priv, u32 anaparam); +void rtl8180_set_anaparam2(struct rtl8180_priv *priv, u32 anaparam2); + +static inline u8 rtl818x_ioread8(struct rtl8180_priv *priv, const u8 __iomem *addr) +{ + return ioread8(addr); +} + +static inline u16 rtl818x_ioread16(struct rtl8180_priv *priv, const __le16 __iomem *addr) +{ + return ioread16(addr); +} + +static inline u32 rtl818x_ioread32(struct rtl8180_priv *priv, const __le32 __iomem *addr) +{ + return ioread32(addr); +} + +static inline void rtl818x_iowrite8(struct rtl8180_priv *priv, + u8 __iomem *addr, u8 val) +{ + iowrite8(val, addr); +} + +static inline void rtl818x_iowrite16(struct rtl8180_priv *priv, + __le16 __iomem *addr, u16 val) +{ + iowrite16(val, addr); +} + +static inline void rtl818x_iowrite32(struct rtl8180_priv *priv, + __le32 __iomem *addr, u32 val) +{ + iowrite32(val, addr); +} + +#endif /* RTL8180_H */ diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8225.c b/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8225.c new file mode 100644 index 000000000..470a869e6 --- /dev/null +++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8225.c @@ -0,0 +1,767 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/* + * Radio tuning for RTL8225 on RTL8180 + * + * Copyright 2007 Michael Wu <flamingice@sourmilk.net> + * Copyright 2007 Andrea Merello <andrea.merello@gmail.com> + * + * Based on the r8180 driver, which is: + * Copyright 2005 Andrea Merello <andrea.merello@gmail.com>, et al. + * + * Thanks to Realtek for their support! + */ + +#include <linux/pci.h> +#include <linux/delay.h> +#include <net/mac80211.h> + +#include "rtl8180.h" +#include "rtl8225.h" + +static void rtl8225_write(struct ieee80211_hw *dev, u8 addr, u16 data) +{ + struct rtl8180_priv *priv = dev->priv; + u16 reg80, reg84, reg82; + u32 bangdata; + int i; + + bangdata = (data << 4) | (addr & 0xf); + + reg80 = rtl818x_ioread16(priv, &priv->map->RFPinsOutput) & 0xfff3; + reg82 = rtl818x_ioread16(priv, &priv->map->RFPinsEnable); + + rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82 | 0x7); + + reg84 = rtl818x_ioread16(priv, &priv->map->RFPinsSelect); + rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84 | 0x7 | 0x400); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(10); + + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2)); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(2); + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(10); + + for (i = 15; i >= 0; i--) { + u16 reg = reg80; + + if (bangdata & (1 << i)) + reg |= 1; + + if (i & 1) + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg); + + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg | (1 << 1)); + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg | (1 << 1)); + + if (!(i & 1)) + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg); + } + + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2)); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(10); + + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2)); + rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84 | 0x400); + rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF); +} + +static u16 rtl8225_read(struct ieee80211_hw *dev, u8 addr) +{ + struct rtl8180_priv *priv = dev->priv; + u16 reg80, reg82, reg84, out; + int i; + + reg80 = rtl818x_ioread16(priv, &priv->map->RFPinsOutput); + reg82 = rtl818x_ioread16(priv, &priv->map->RFPinsEnable); + reg84 = rtl818x_ioread16(priv, &priv->map->RFPinsSelect) | 0x400; + + reg80 &= ~0xF; + + rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82 | 0x000F); + rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84 | 0x000F); + + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2)); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(4); + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(5); + + for (i = 4; i >= 0; i--) { + u16 reg = reg80 | ((addr >> i) & 1); + + if (!(i & 1)) { + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(1); + } + + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, + reg | (1 << 1)); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(2); + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, + reg | (1 << 1)); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(2); + + if (i & 1) { + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(1); + } + } + + rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x000E); + rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x040E); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, + reg80 | (1 << 3) | (1 << 1)); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(2); + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, + reg80 | (1 << 3)); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(2); + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, + reg80 | (1 << 3)); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(2); + + out = 0; + for (i = 11; i >= 0; i--) { + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, + reg80 | (1 << 3)); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(1); + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, + reg80 | (1 << 3) | (1 << 1)); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(2); + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, + reg80 | (1 << 3) | (1 << 1)); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(2); + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, + reg80 | (1 << 3) | (1 << 1)); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(2); + + if (rtl818x_ioread16(priv, &priv->map->RFPinsInput) & (1 << 1)) + out |= 1 << i; + + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, + reg80 | (1 << 3)); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(2); + } + + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, + reg80 | (1 << 3) | (1 << 2)); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(2); + + rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82); + rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84); + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x03A0); + + return out; +} + +static const u16 rtl8225bcd_rxgain[] = { + 0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0405, 0x0408, 0x0409, + 0x040a, 0x040b, 0x0502, 0x0503, 0x0504, 0x0505, 0x0540, 0x0541, + 0x0542, 0x0543, 0x0544, 0x0545, 0x0580, 0x0581, 0x0582, 0x0583, + 0x0584, 0x0585, 0x0588, 0x0589, 0x058a, 0x058b, 0x0643, 0x0644, + 0x0645, 0x0680, 0x0681, 0x0682, 0x0683, 0x0684, 0x0685, 0x0688, + 0x0689, 0x068a, 0x068b, 0x068c, 0x0742, 0x0743, 0x0744, 0x0745, + 0x0780, 0x0781, 0x0782, 0x0783, 0x0784, 0x0785, 0x0788, 0x0789, + 0x078a, 0x078b, 0x078c, 0x078d, 0x0790, 0x0791, 0x0792, 0x0793, + 0x0794, 0x0795, 0x0798, 0x0799, 0x079a, 0x079b, 0x079c, 0x079d, + 0x07a0, 0x07a1, 0x07a2, 0x07a3, 0x07a4, 0x07a5, 0x07a8, 0x07a9, + 0x07aa, 0x07ab, 0x07ac, 0x07ad, 0x07b0, 0x07b1, 0x07b2, 0x07b3, + 0x07b4, 0x07b5, 0x07b8, 0x07b9, 0x07ba, 0x07bb, 0x07bb +}; + +static const u8 rtl8225_agc[] = { + 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, + 0x9d, 0x9c, 0x9b, 0x9a, 0x99, 0x98, 0x97, 0x96, + 0x95, 0x94, 0x93, 0x92, 0x91, 0x90, 0x8f, 0x8e, + 0x8d, 0x8c, 0x8b, 0x8a, 0x89, 0x88, 0x87, 0x86, + 0x85, 0x84, 0x83, 0x82, 0x81, 0x80, 0x3f, 0x3e, + 0x3d, 0x3c, 0x3b, 0x3a, 0x39, 0x38, 0x37, 0x36, + 0x35, 0x34, 0x33, 0x32, 0x31, 0x30, 0x2f, 0x2e, + 0x2d, 0x2c, 0x2b, 0x2a, 0x29, 0x28, 0x27, 0x26, + 0x25, 0x24, 0x23, 0x22, 0x21, 0x20, 0x1f, 0x1e, + 0x1d, 0x1c, 0x1b, 0x1a, 0x19, 0x18, 0x17, 0x16, + 0x15, 0x14, 0x13, 0x12, 0x11, 0x10, 0x0f, 0x0e, + 0x0d, 0x0c, 0x0b, 0x0a, 0x09, 0x08, 0x07, 0x06, + 0x05, 0x04, 0x03, 0x02, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01 +}; + +static const u8 rtl8225_gain[] = { + 0x23, 0x88, 0x7c, 0xa5, /* -82dbm */ + 0x23, 0x88, 0x7c, 0xb5, /* -82dbm */ + 0x23, 0x88, 0x7c, 0xc5, /* -82dbm */ + 0x33, 0x80, 0x79, 0xc5, /* -78dbm */ + 0x43, 0x78, 0x76, 0xc5, /* -74dbm */ + 0x53, 0x60, 0x73, 0xc5, /* -70dbm */ + 0x63, 0x58, 0x70, 0xc5, /* -66dbm */ +}; + +static const u8 rtl8225_threshold[] = { + 0x8d, 0x8d, 0x8d, 0x8d, 0x9d, 0xad, 0xbd +}; + +static const u8 rtl8225_tx_gain_cck_ofdm[] = { + 0x02, 0x06, 0x0e, 0x1e, 0x3e, 0x7e +}; + +static const u8 rtl8225_tx_power_cck[] = { + 0x18, 0x17, 0x15, 0x11, 0x0c, 0x08, 0x04, 0x02, + 0x1b, 0x1a, 0x17, 0x13, 0x0e, 0x09, 0x04, 0x02, + 0x1f, 0x1e, 0x1a, 0x15, 0x10, 0x0a, 0x05, 0x02, + 0x22, 0x21, 0x1d, 0x18, 0x11, 0x0b, 0x06, 0x02, + 0x26, 0x25, 0x21, 0x1b, 0x14, 0x0d, 0x06, 0x03, + 0x2b, 0x2a, 0x25, 0x1e, 0x16, 0x0e, 0x07, 0x03 +}; + +static const u8 rtl8225_tx_power_cck_ch14[] = { + 0x18, 0x17, 0x15, 0x0c, 0x00, 0x00, 0x00, 0x00, + 0x1b, 0x1a, 0x17, 0x0e, 0x00, 0x00, 0x00, 0x00, + 0x1f, 0x1e, 0x1a, 0x0f, 0x00, 0x00, 0x00, 0x00, + 0x22, 0x21, 0x1d, 0x11, 0x00, 0x00, 0x00, 0x00, + 0x26, 0x25, 0x21, 0x13, 0x00, 0x00, 0x00, 0x00, + 0x2b, 0x2a, 0x25, 0x15, 0x00, 0x00, 0x00, 0x00 +}; + +static const u8 rtl8225_tx_power_ofdm[] = { + 0x80, 0x90, 0xa2, 0xb5, 0xcb, 0xe4 +}; + +static const u32 rtl8225_chan[] = { + 0x085c, 0x08dc, 0x095c, 0x09dc, 0x0a5c, 0x0adc, 0x0b5c, + 0x0bdc, 0x0c5c, 0x0cdc, 0x0d5c, 0x0ddc, 0x0e5c, 0x0f72 +}; + +static void rtl8225_rf_set_tx_power(struct ieee80211_hw *dev, int channel) +{ + struct rtl8180_priv *priv = dev->priv; + u8 cck_power, ofdm_power; + const u8 *tmp; + u32 reg; + int i; + + cck_power = priv->channels[channel - 1].hw_value & 0xFF; + ofdm_power = priv->channels[channel - 1].hw_value >> 8; + + cck_power = min(cck_power, (u8)35); + ofdm_power = min(ofdm_power, (u8)35); + + rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK, + rtl8225_tx_gain_cck_ofdm[cck_power / 6] >> 1); + + if (channel == 14) + tmp = &rtl8225_tx_power_cck_ch14[(cck_power % 6) * 8]; + else + tmp = &rtl8225_tx_power_cck[(cck_power % 6) * 8]; + + for (i = 0; i < 8; i++) + rtl8225_write_phy_cck(dev, 0x44 + i, *tmp++); + + msleep(1); /* FIXME: optional? */ + + /* TODO: use set_anaparam2 dev.c_func*/ + /* anaparam2 on */ + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); + reg = rtl818x_ioread8(priv, &priv->map->CONFIG3); + rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE); + rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, RTL8225_ANAPARAM2_ON); + rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE); + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); + + rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM, + rtl8225_tx_gain_cck_ofdm[ofdm_power/6] >> 1); + + tmp = &rtl8225_tx_power_ofdm[ofdm_power % 6]; + + rtl8225_write_phy_ofdm(dev, 5, *tmp); + rtl8225_write_phy_ofdm(dev, 7, *tmp); + + msleep(1); +} + +static void rtl8225_rf_init(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + int i; + + rtl8180_set_anaparam(priv, RTL8225_ANAPARAM_ON); + + /* host_pci_init */ + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x0480); + rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF); + rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x0488); + rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + msleep(200); /* FIXME: ehh?? */ + rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0xFF & ~(1 << 6)); + + rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x000a8008); + + /* TODO: check if we need really to change BRSR to do RF config */ + rtl818x_ioread16(priv, &priv->map->BRSR); + rtl818x_iowrite16(priv, &priv->map->BRSR, 0xFFFF); + rtl818x_iowrite32(priv, &priv->map->RF_PARA, 0x00100044); + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); + rtl818x_iowrite8(priv, &priv->map->CONFIG3, 0x44); + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); + + rtl8225_write(dev, 0x0, 0x067); + rtl8225_write(dev, 0x1, 0xFE0); + rtl8225_write(dev, 0x2, 0x44D); + rtl8225_write(dev, 0x3, 0x441); + rtl8225_write(dev, 0x4, 0x8BE); + rtl8225_write(dev, 0x5, 0xBF0); /* TODO: minipci */ + rtl8225_write(dev, 0x6, 0xAE6); + rtl8225_write(dev, 0x7, rtl8225_chan[0]); + rtl8225_write(dev, 0x8, 0x01F); + rtl8225_write(dev, 0x9, 0x334); + rtl8225_write(dev, 0xA, 0xFD4); + rtl8225_write(dev, 0xB, 0x391); + rtl8225_write(dev, 0xC, 0x050); + rtl8225_write(dev, 0xD, 0x6DB); + rtl8225_write(dev, 0xE, 0x029); + rtl8225_write(dev, 0xF, 0x914); msleep(1); + + rtl8225_write(dev, 0x2, 0xC4D); msleep(100); + + rtl8225_write(dev, 0x0, 0x127); + + for (i = 0; i < ARRAY_SIZE(rtl8225bcd_rxgain); i++) { + rtl8225_write(dev, 0x1, i + 1); + rtl8225_write(dev, 0x2, rtl8225bcd_rxgain[i]); + } + + rtl8225_write(dev, 0x0, 0x027); + rtl8225_write(dev, 0x0, 0x22F); + rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF); + + for (i = 0; i < ARRAY_SIZE(rtl8225_agc); i++) { + rtl8225_write_phy_ofdm(dev, 0xB, rtl8225_agc[i]); + msleep(1); + rtl8225_write_phy_ofdm(dev, 0xA, 0x80 + i); + msleep(1); + } + + msleep(1); + + rtl8225_write_phy_ofdm(dev, 0x00, 0x01); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x01, 0x02); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x02, 0x62); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x03, 0x00); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x04, 0x00); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x05, 0x00); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x06, 0x00); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x07, 0x00); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x08, 0x00); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x09, 0xfe); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x0a, 0x09); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x0b, 0x80); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x0c, 0x01); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x0e, 0xd3); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x0f, 0x38); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x10, 0x84); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x11, 0x03); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x12, 0x20); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x13, 0x20); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x14, 0x00); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x15, 0x40); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x16, 0x00); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x17, 0x40); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x18, 0xef); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x19, 0x19); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x1a, 0x20); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x1b, 0x76); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x1c, 0x04); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x1e, 0x95); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x1f, 0x75); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x20, 0x1f); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x21, 0x27); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x22, 0x16); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x24, 0x46); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x25, 0x20); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x26, 0x90); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x27, 0x88); msleep(1); + + rtl8225_write_phy_cck(dev, 0x00, 0x98); msleep(1); + rtl8225_write_phy_cck(dev, 0x03, 0x20); msleep(1); + rtl8225_write_phy_cck(dev, 0x04, 0x7e); msleep(1); + rtl8225_write_phy_cck(dev, 0x05, 0x12); msleep(1); + rtl8225_write_phy_cck(dev, 0x06, 0xfc); msleep(1); + rtl8225_write_phy_cck(dev, 0x07, 0x78); msleep(1); + rtl8225_write_phy_cck(dev, 0x08, 0x2e); msleep(1); + rtl8225_write_phy_cck(dev, 0x10, 0x93); msleep(1); + rtl8225_write_phy_cck(dev, 0x11, 0x88); msleep(1); + rtl8225_write_phy_cck(dev, 0x12, 0x47); msleep(1); + rtl8225_write_phy_cck(dev, 0x13, 0xd0); + rtl8225_write_phy_cck(dev, 0x19, 0x00); + rtl8225_write_phy_cck(dev, 0x1a, 0xa0); + rtl8225_write_phy_cck(dev, 0x1b, 0x08); + rtl8225_write_phy_cck(dev, 0x40, 0x86); + rtl8225_write_phy_cck(dev, 0x41, 0x8d); msleep(1); + rtl8225_write_phy_cck(dev, 0x42, 0x15); msleep(1); + rtl8225_write_phy_cck(dev, 0x43, 0x18); msleep(1); + rtl8225_write_phy_cck(dev, 0x44, 0x1f); msleep(1); + rtl8225_write_phy_cck(dev, 0x45, 0x1e); msleep(1); + rtl8225_write_phy_cck(dev, 0x46, 0x1a); msleep(1); + rtl8225_write_phy_cck(dev, 0x47, 0x15); msleep(1); + rtl8225_write_phy_cck(dev, 0x48, 0x10); msleep(1); + rtl8225_write_phy_cck(dev, 0x49, 0x0a); msleep(1); + rtl8225_write_phy_cck(dev, 0x4a, 0x05); msleep(1); + rtl8225_write_phy_cck(dev, 0x4b, 0x02); msleep(1); + rtl8225_write_phy_cck(dev, 0x4c, 0x05); msleep(1); + + rtl818x_iowrite8(priv, &priv->map->TESTR, 0x0D); msleep(1); + + rtl8225_rf_set_tx_power(dev, 1); + + /* RX antenna default to A */ + rtl8225_write_phy_cck(dev, 0x10, 0x9b); msleep(1); /* B: 0xDB */ + rtl8225_write_phy_ofdm(dev, 0x26, 0x90); msleep(1); /* B: 0x10 */ + + rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03); /* B: 0x00 */ + msleep(1); + rtl818x_iowrite32(priv, (__le32 __iomem *)((void __iomem *)priv->map + 0x94), 0x15c00002); + rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF); + + rtl8225_write(dev, 0x0c, 0x50); + /* set OFDM initial gain */ + rtl8225_write_phy_ofdm(dev, 0x0d, rtl8225_gain[4 * 4]); + rtl8225_write_phy_ofdm(dev, 0x23, rtl8225_gain[4 * 4 + 1]); + rtl8225_write_phy_ofdm(dev, 0x1b, rtl8225_gain[4 * 4 + 2]); + rtl8225_write_phy_ofdm(dev, 0x1d, rtl8225_gain[4 * 4 + 3]); + /* set CCK threshold */ + rtl8225_write_phy_cck(dev, 0x41, rtl8225_threshold[0]); +} + +static const u8 rtl8225z2_tx_power_cck_ch14[] = { + 0x36, 0x35, 0x2e, 0x1b, 0x00, 0x00, 0x00, 0x00 +}; + +static const u8 rtl8225z2_tx_power_cck_B[] = { + 0x30, 0x2f, 0x29, 0x21, 0x19, 0x10, 0x08, 0x04 +}; + +static const u8 rtl8225z2_tx_power_cck_A[] = { + 0x33, 0x32, 0x2b, 0x23, 0x1a, 0x11, 0x08, 0x04 +}; + +static const u8 rtl8225z2_tx_power_cck[] = { + 0x36, 0x35, 0x2e, 0x25, 0x1c, 0x12, 0x09, 0x04 +}; + +static void rtl8225z2_rf_set_tx_power(struct ieee80211_hw *dev, int channel) +{ + struct rtl8180_priv *priv = dev->priv; + u8 cck_power, ofdm_power; + const u8 *tmp; + int i; + + cck_power = priv->channels[channel - 1].hw_value & 0xFF; + ofdm_power = priv->channels[channel - 1].hw_value >> 8; + + if (channel == 14) + tmp = rtl8225z2_tx_power_cck_ch14; + else if (cck_power == 12) + tmp = rtl8225z2_tx_power_cck_B; + else if (cck_power == 13) + tmp = rtl8225z2_tx_power_cck_A; + else + tmp = rtl8225z2_tx_power_cck; + + for (i = 0; i < 8; i++) + rtl8225_write_phy_cck(dev, 0x44 + i, *tmp++); + + cck_power = min(cck_power, (u8)35); + if (cck_power == 13 || cck_power == 14) + cck_power = 12; + if (cck_power >= 15) + cck_power -= 2; + + rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK, cck_power); + rtl818x_ioread8(priv, &priv->map->TX_GAIN_CCK); + msleep(1); + + ofdm_power = min(ofdm_power, (u8)35); + rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM, ofdm_power); + + rtl8225_write_phy_ofdm(dev, 2, 0x62); + rtl8225_write_phy_ofdm(dev, 5, 0x00); + rtl8225_write_phy_ofdm(dev, 6, 0x40); + rtl8225_write_phy_ofdm(dev, 7, 0x00); + rtl8225_write_phy_ofdm(dev, 8, 0x40); + + msleep(1); +} + +static const u16 rtl8225z2_rxgain[] = { + 0x0000, 0x0001, 0x0002, 0x0003, 0x0004, 0x0005, 0x0008, 0x0009, + 0x000a, 0x000b, 0x0102, 0x0103, 0x0104, 0x0105, 0x0140, 0x0141, + 0x0142, 0x0143, 0x0144, 0x0145, 0x0180, 0x0181, 0x0182, 0x0183, + 0x0184, 0x0185, 0x0188, 0x0189, 0x018a, 0x018b, 0x0243, 0x0244, + 0x0245, 0x0280, 0x0281, 0x0282, 0x0283, 0x0284, 0x0285, 0x0288, + 0x0289, 0x028a, 0x028b, 0x028c, 0x0342, 0x0343, 0x0344, 0x0345, + 0x0380, 0x0381, 0x0382, 0x0383, 0x0384, 0x0385, 0x0388, 0x0389, + 0x038a, 0x038b, 0x038c, 0x038d, 0x0390, 0x0391, 0x0392, 0x0393, + 0x0394, 0x0395, 0x0398, 0x0399, 0x039a, 0x039b, 0x039c, 0x039d, + 0x03a0, 0x03a1, 0x03a2, 0x03a3, 0x03a4, 0x03a5, 0x03a8, 0x03a9, + 0x03aa, 0x03ab, 0x03ac, 0x03ad, 0x03b0, 0x03b1, 0x03b2, 0x03b3, + 0x03b4, 0x03b5, 0x03b8, 0x03b9, 0x03ba, 0x03bb, 0x03bb +}; + +static void rtl8225z2_rf_init(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + int i; + + rtl8180_set_anaparam(priv, RTL8225_ANAPARAM_ON); + + /* host_pci_init */ + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x0480); + rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF); + rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x0488); + rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + msleep(200); /* FIXME: ehh?? */ + rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0xFF & ~(1 << 6)); + + rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x00088008); + + /* TODO: check if we need really to change BRSR to do RF config */ + rtl818x_ioread16(priv, &priv->map->BRSR); + rtl818x_iowrite16(priv, &priv->map->BRSR, 0xFFFF); + rtl818x_iowrite32(priv, &priv->map->RF_PARA, 0x00100044); + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); + rtl818x_iowrite8(priv, &priv->map->CONFIG3, 0x44); + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); + + rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF); + + rtl8225_write(dev, 0x0, 0x0B7); msleep(1); + rtl8225_write(dev, 0x1, 0xEE0); msleep(1); + rtl8225_write(dev, 0x2, 0x44D); msleep(1); + rtl8225_write(dev, 0x3, 0x441); msleep(1); + rtl8225_write(dev, 0x4, 0x8C3); msleep(1); + rtl8225_write(dev, 0x5, 0xC72); msleep(1); + rtl8225_write(dev, 0x6, 0x0E6); msleep(1); + rtl8225_write(dev, 0x7, 0x82A); msleep(1); + rtl8225_write(dev, 0x8, 0x03F); msleep(1); + rtl8225_write(dev, 0x9, 0x335); msleep(1); + rtl8225_write(dev, 0xa, 0x9D4); msleep(1); + rtl8225_write(dev, 0xb, 0x7BB); msleep(1); + rtl8225_write(dev, 0xc, 0x850); msleep(1); + rtl8225_write(dev, 0xd, 0xCDF); msleep(1); + rtl8225_write(dev, 0xe, 0x02B); msleep(1); + rtl8225_write(dev, 0xf, 0x114); msleep(100); + + if (!(rtl8225_read(dev, 6) & (1 << 7))) { + rtl8225_write(dev, 0x02, 0x0C4D); + msleep(200); + rtl8225_write(dev, 0x02, 0x044D); + msleep(100); + /* TODO: readd calibration failure message when the calibration + check works */ + } + + rtl8225_write(dev, 0x0, 0x1B7); + rtl8225_write(dev, 0x3, 0x002); + rtl8225_write(dev, 0x5, 0x004); + + for (i = 0; i < ARRAY_SIZE(rtl8225z2_rxgain); i++) { + rtl8225_write(dev, 0x1, i + 1); + rtl8225_write(dev, 0x2, rtl8225z2_rxgain[i]); + } + + rtl8225_write(dev, 0x0, 0x0B7); msleep(100); + rtl8225_write(dev, 0x2, 0xC4D); + + msleep(200); + rtl8225_write(dev, 0x2, 0x44D); + msleep(100); + + rtl8225_write(dev, 0x00, 0x2BF); + rtl8225_write(dev, 0xFF, 0xFFFF); + + rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF); + + for (i = 0; i < ARRAY_SIZE(rtl8225_agc); i++) { + rtl8225_write_phy_ofdm(dev, 0xB, rtl8225_agc[i]); + msleep(1); + rtl8225_write_phy_ofdm(dev, 0xA, 0x80 + i); + msleep(1); + } + + msleep(1); + + rtl8225_write_phy_ofdm(dev, 0x00, 0x01); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x01, 0x02); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x02, 0x62); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x03, 0x00); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x04, 0x00); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x05, 0x00); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x06, 0x40); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x07, 0x00); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x08, 0x40); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x09, 0xfe); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x0a, 0x09); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x18, 0xef); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x0b, 0x80); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x0c, 0x01); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x0d, 0x43); + rtl8225_write_phy_ofdm(dev, 0x0e, 0xd3); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x0f, 0x38); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x10, 0x84); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x11, 0x06); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x12, 0x20); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x13, 0x20); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x14, 0x00); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x15, 0x40); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x16, 0x00); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x17, 0x40); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x18, 0xef); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x19, 0x19); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x1a, 0x20); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x1b, 0x11); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x1c, 0x04); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x1d, 0xc5); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x1e, 0xb3); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x1f, 0x75); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x20, 0x1f); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x21, 0x27); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x22, 0x16); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x23, 0x80); msleep(1); /* FIXME: not needed? */ + rtl8225_write_phy_ofdm(dev, 0x24, 0x46); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x25, 0x20); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x26, 0x90); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x27, 0x88); msleep(1); + + rtl8225_write_phy_cck(dev, 0x00, 0x98); msleep(1); + rtl8225_write_phy_cck(dev, 0x03, 0x20); msleep(1); + rtl8225_write_phy_cck(dev, 0x04, 0x7e); msleep(1); + rtl8225_write_phy_cck(dev, 0x05, 0x12); msleep(1); + rtl8225_write_phy_cck(dev, 0x06, 0xfc); msleep(1); + rtl8225_write_phy_cck(dev, 0x07, 0x78); msleep(1); + rtl8225_write_phy_cck(dev, 0x08, 0x2e); msleep(1); + rtl8225_write_phy_cck(dev, 0x10, 0x93); msleep(1); + rtl8225_write_phy_cck(dev, 0x11, 0x88); msleep(1); + rtl8225_write_phy_cck(dev, 0x12, 0x47); msleep(1); + rtl8225_write_phy_cck(dev, 0x13, 0xd0); + rtl8225_write_phy_cck(dev, 0x19, 0x00); + rtl8225_write_phy_cck(dev, 0x1a, 0xa0); + rtl8225_write_phy_cck(dev, 0x1b, 0x08); + rtl8225_write_phy_cck(dev, 0x40, 0x86); + rtl8225_write_phy_cck(dev, 0x41, 0x8a); msleep(1); + rtl8225_write_phy_cck(dev, 0x42, 0x15); msleep(1); + rtl8225_write_phy_cck(dev, 0x43, 0x18); msleep(1); + rtl8225_write_phy_cck(dev, 0x44, 0x36); msleep(1); + rtl8225_write_phy_cck(dev, 0x45, 0x35); msleep(1); + rtl8225_write_phy_cck(dev, 0x46, 0x2e); msleep(1); + rtl8225_write_phy_cck(dev, 0x47, 0x25); msleep(1); + rtl8225_write_phy_cck(dev, 0x48, 0x1c); msleep(1); + rtl8225_write_phy_cck(dev, 0x49, 0x12); msleep(1); + rtl8225_write_phy_cck(dev, 0x4a, 0x09); msleep(1); + rtl8225_write_phy_cck(dev, 0x4b, 0x04); msleep(1); + rtl8225_write_phy_cck(dev, 0x4c, 0x05); msleep(1); + + rtl818x_iowrite8(priv, (u8 __iomem *)((void __iomem *)priv->map + 0x5B), 0x0D); msleep(1); + + rtl8225z2_rf_set_tx_power(dev, 1); + + /* RX antenna default to A */ + rtl8225_write_phy_cck(dev, 0x10, 0x9b); msleep(1); /* B: 0xDB */ + rtl8225_write_phy_ofdm(dev, 0x26, 0x90); msleep(1); /* B: 0x10 */ + + rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03); /* B: 0x00 */ + msleep(1); + rtl818x_iowrite32(priv, (__le32 __iomem *)((void __iomem *)priv->map + 0x94), 0x15c00002); + rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF); +} + +static void rtl8225_rf_stop(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + u8 reg; + + rtl8225_write(dev, 0x4, 0x1f); msleep(1); + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); + reg = rtl818x_ioread8(priv, &priv->map->CONFIG3); + rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE); + rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, RTL8225_ANAPARAM2_OFF); + rtl818x_iowrite32(priv, &priv->map->ANAPARAM, RTL8225_ANAPARAM_OFF); + rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE); + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); +} + +static void rtl8225_rf_set_channel(struct ieee80211_hw *dev, + struct ieee80211_conf *conf) +{ + struct rtl8180_priv *priv = dev->priv; + int chan = + ieee80211_frequency_to_channel(conf->chandef.chan->center_freq); + + if (priv->rf->init == rtl8225_rf_init) + rtl8225_rf_set_tx_power(dev, chan); + else + rtl8225z2_rf_set_tx_power(dev, chan); + + rtl8225_write(dev, 0x7, rtl8225_chan[chan - 1]); + msleep(10); +} + +static const struct rtl818x_rf_ops rtl8225_ops = { + .name = "rtl8225", + .init = rtl8225_rf_init, + .stop = rtl8225_rf_stop, + .set_chan = rtl8225_rf_set_channel, +}; + +static const struct rtl818x_rf_ops rtl8225z2_ops = { + .name = "rtl8225z2", + .init = rtl8225z2_rf_init, + .stop = rtl8225_rf_stop, + .set_chan = rtl8225_rf_set_channel, +}; + +const struct rtl818x_rf_ops * rtl8180_detect_rf(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + u16 reg8, reg9; + + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x0480); + rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x0488); + rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + msleep(100); + + rtl8225_write(dev, 0, 0x1B7); + + reg8 = rtl8225_read(dev, 8); + reg9 = rtl8225_read(dev, 9); + + rtl8225_write(dev, 0, 0x0B7); + + if (reg8 != 0x588 || reg9 != 0x700) + return &rtl8225_ops; + + return &rtl8225z2_ops; +} diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8225.h b/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8225.h new file mode 100644 index 000000000..de7727b74 --- /dev/null +++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8225.h @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef RTL8180_RTL8225_H +#define RTL8180_RTL8225_H + +#define RTL8225_ANAPARAM_ON 0xa0000b59 +#define RTL8225_ANAPARAM2_ON 0x860dec11 +#define RTL8225_ANAPARAM_OFF 0xa00beb59 +#define RTL8225_ANAPARAM2_OFF 0x840dec11 + +const struct rtl818x_rf_ops * rtl8180_detect_rf(struct ieee80211_hw *); + +static inline void rtl8225_write_phy_ofdm(struct ieee80211_hw *dev, + u8 addr, u8 data) +{ + rtl8180_write_phy(dev, addr, data); +} + +static inline void rtl8225_write_phy_cck(struct ieee80211_hw *dev, + u8 addr, u8 data) +{ + rtl8180_write_phy(dev, addr, data | 0x10000); +} + +#endif /* RTL8180_RTL8225_H */ diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8225se.c b/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8225se.c new file mode 100644 index 000000000..e1bf41c27 --- /dev/null +++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8225se.c @@ -0,0 +1,430 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/* Radio tuning for RTL8225 on RTL8187SE + * + * Copyright 2009 Larry Finger <Larry.Finger@lwfinger.net> + * Copyright 2014 Andrea Merello <andrea.merello@gmail.com> + * + * Based on the r8180 and Realtek r8187se drivers, which are: + * Copyright 2004-2005 Andrea Merello <andrea.merello@gmail.com>, et al. + * + * Also based on the rtl8187 driver, which is: + * Copyright 2007 Michael Wu <flamingice@sourmilk.net> + * Copyright 2007 Andrea Merello <andrea.merello@gmail.com> + */ + +#include <net/mac80211.h> + +#include "rtl8180.h" +#include "rtl8225se.h" + +#define PFX "rtl8225 (se) " + +static const u32 RF_GAIN_TABLE[] = { + 0x0096, 0x0076, 0x0056, 0x0036, 0x0016, 0x01f6, 0x01d6, 0x01b6, + 0x0196, 0x0176, 0x00F7, 0x00D7, 0x00B7, 0x0097, 0x0077, 0x0057, + 0x0037, 0x00FB, 0x00DB, 0x00BB, 0x00FF, 0x00E3, 0x00C3, 0x00A3, + 0x0083, 0x0063, 0x0043, 0x0023, 0x0003, 0x01E3, 0x01C3, 0x01A3, + 0x0183, 0x0163, 0x0143, 0x0123, 0x0103 +}; + +static const u8 cck_ofdm_gain_settings[] = { + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, + 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b, + 0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11, + 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, + 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, + 0x1e, 0x1f, 0x20, 0x21, 0x22, 0x23, +}; + +static const u32 rtl8225se_chan[] = { + 0x0080, 0x0100, 0x0180, 0x0200, 0x0280, 0x0300, 0x0380, + 0x0400, 0x0480, 0x0500, 0x0580, 0x0600, 0x0680, 0x074A, +}; + +static const u8 ZEBRA_AGC[] = { + 0x7E, 0x7E, 0x7E, 0x7E, 0x7D, 0x7C, 0x7B, 0x7A, + 0x79, 0x78, 0x77, 0x76, 0x75, 0x74, 0x73, 0x72, + 0x71, 0x70, 0x6F, 0x6E, 0x6D, 0x6C, 0x6B, 0x6A, + 0x69, 0x68, 0x67, 0x66, 0x65, 0x64, 0x63, 0x62, + 0x48, 0x47, 0x46, 0x45, 0x44, 0x29, 0x28, 0x27, + 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0x08, 0x07, + 0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, + 0x0f, 0x0f, 0x10, 0x11, 0x12, 0x13, 0x15, 0x16, + 0x17, 0x17, 0x18, 0x18, 0x19, 0x1a, 0x1a, 0x1b, + 0x1b, 0x1c, 0x1c, 0x1d, 0x1d, 0x1d, 0x1e, 0x1e, + 0x1f, 0x1f, 0x1f, 0x20, 0x20, 0x20, 0x20, 0x21, + 0x21, 0x21, 0x22, 0x22, 0x22, 0x23, 0x23, 0x24, + 0x24, 0x25, 0x25, 0x25, 0x26, 0x26, 0x27, 0x27, + 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F +}; + +static const u8 OFDM_CONFIG[] = { + 0x10, 0x0F, 0x0A, 0x0C, 0x14, 0xFA, 0xFF, 0x50, + 0x00, 0x50, 0x00, 0x00, 0x00, 0x5C, 0x00, 0x00, + 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0xA8, 0x26, + 0x32, 0x33, 0x06, 0xA5, 0x6F, 0x55, 0xC8, 0xBB, + 0x0A, 0xE1, 0x2C, 0x4A, 0x86, 0x83, 0x34, 0x00, + 0x4F, 0x24, 0x6F, 0xC2, 0x03, 0x40, 0x80, 0x00, + 0xC0, 0xC1, 0x58, 0xF1, 0x00, 0xC4, 0x90, 0x3e, + 0xD8, 0x3C, 0x7B, 0x10, 0x10 +}; + +static void rtl8187se_three_wire_io(struct ieee80211_hw *dev, u8 *data, + u8 len, bool write) +{ + struct rtl8180_priv *priv = dev->priv; + int i; + u8 tmp; + + do { + for (i = 0; i < 5; i++) { + tmp = rtl818x_ioread8(priv, SW_3W_CMD1); + if (!(tmp & 0x3)) + break; + udelay(10); + } + if (i == 5) + wiphy_err(dev->wiphy, PFX + "CmdReg: 0x%x RE/WE bits aren't clear\n", tmp); + + tmp = rtl818x_ioread8(priv, &priv->map->rf_sw_config) | 0x02; + rtl818x_iowrite8(priv, &priv->map->rf_sw_config, tmp); + + tmp = rtl818x_ioread8(priv, REG_ADDR1(0x84)) & 0xF7; + rtl818x_iowrite8(priv, REG_ADDR1(0x84), tmp); + if (write) { + if (len == 16) { + rtl818x_iowrite16(priv, SW_3W_DB0, + *(u16 *)data); + } else if (len == 64) { + rtl818x_iowrite32(priv, SW_3W_DB0_4, + *((u32 *)data)); + rtl818x_iowrite32(priv, SW_3W_DB1_4, + *((u32 *)(data + 4))); + } else + wiphy_err(dev->wiphy, PFX + "Unimplemented length\n"); + } else { + rtl818x_iowrite16(priv, SW_3W_DB0, *(u16 *)data); + } + if (write) + tmp = 2; + else + tmp = 1; + rtl818x_iowrite8(priv, SW_3W_CMD1, tmp); + for (i = 0; i < 5; i++) { + tmp = rtl818x_ioread8(priv, SW_3W_CMD1); + if (!(tmp & 0x3)) + break; + udelay(10); + } + rtl818x_iowrite8(priv, SW_3W_CMD1, 0); + if (!write) { + *((u16 *)data) = rtl818x_ioread16(priv, SI_DATA_REG); + *((u16 *)data) &= 0x0FFF; + } + } while (0); +} + +static u32 rtl8187se_rf_readreg(struct ieee80211_hw *dev, u8 addr) +{ + u32 dataread = addr & 0x0F; + rtl8187se_three_wire_io(dev, (u8 *)&dataread, 16, 0); + return dataread; +} + +static void rtl8187se_rf_writereg(struct ieee80211_hw *dev, u8 addr, u32 data) +{ + u32 outdata = (data << 4) | (u32)(addr & 0x0F); + rtl8187se_three_wire_io(dev, (u8 *)&outdata, 16, 1); +} + + +static void rtl8225se_write_zebra_agc(struct ieee80211_hw *dev) +{ + int i; + + for (i = 0; i < 128; i++) { + rtl8225se_write_phy_ofdm(dev, 0xF, ZEBRA_AGC[i]); + rtl8225se_write_phy_ofdm(dev, 0xE, i+0x80); + rtl8225se_write_phy_ofdm(dev, 0xE, 0); + } +} + +static void rtl8187se_write_ofdm_config(struct ieee80211_hw *dev) +{ + /* write OFDM_CONFIG table */ + int i; + + for (i = 0; i < 60; i++) + rtl8225se_write_phy_ofdm(dev, i, OFDM_CONFIG[i]); + +} + +static void rtl8225sez2_rf_set_tx_power(struct ieee80211_hw *dev, int channel) +{ + struct rtl8180_priv *priv = dev->priv; + u8 cck_power, ofdm_power; + + cck_power = priv->channels[channel - 1].hw_value & 0xFF; + if (cck_power > 35) + cck_power = 35; + rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK, + cck_ofdm_gain_settings[cck_power]); + + usleep_range(1000, 5000); + ofdm_power = priv->channels[channel - 1].hw_value >> 8; + if (ofdm_power > 35) + ofdm_power = 35; + + rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM, + cck_ofdm_gain_settings[ofdm_power]); + if (ofdm_power < 12) { + rtl8225se_write_phy_ofdm(dev, 7, 0x5C); + rtl8225se_write_phy_ofdm(dev, 9, 0x5C); + } + if (ofdm_power < 18) { + rtl8225se_write_phy_ofdm(dev, 7, 0x54); + rtl8225se_write_phy_ofdm(dev, 9, 0x54); + } else { + rtl8225se_write_phy_ofdm(dev, 7, 0x50); + rtl8225se_write_phy_ofdm(dev, 9, 0x50); + } + + usleep_range(1000, 5000); +} + +static void rtl8187se_write_rf_gain(struct ieee80211_hw *dev) +{ + int i; + + for (i = 0; i <= 36; i++) { + rtl8187se_rf_writereg(dev, 0x01, i); mdelay(1); + rtl8187se_rf_writereg(dev, 0x02, RF_GAIN_TABLE[i]); mdelay(1); + } +} + +static void rtl8187se_write_initial_gain(struct ieee80211_hw *dev, + int init_gain) +{ + switch (init_gain) { + default: + rtl8225se_write_phy_ofdm(dev, 0x17, 0x26); mdelay(1); + rtl8225se_write_phy_ofdm(dev, 0x24, 0x86); mdelay(1); + rtl8225se_write_phy_ofdm(dev, 0x05, 0xFA); mdelay(1); + break; + case 2: + rtl8225se_write_phy_ofdm(dev, 0x17, 0x36); mdelay(1); + rtl8225se_write_phy_ofdm(dev, 0x24, 0x86); mdelay(1); + rtl8225se_write_phy_ofdm(dev, 0x05, 0xFA); mdelay(1); + break; + case 3: + rtl8225se_write_phy_ofdm(dev, 0x17, 0x36); mdelay(1); + rtl8225se_write_phy_ofdm(dev, 0x24, 0x86); mdelay(1); + rtl8225se_write_phy_ofdm(dev, 0x05, 0xFB); mdelay(1); + break; + case 4: + rtl8225se_write_phy_ofdm(dev, 0x17, 0x46); mdelay(1); + rtl8225se_write_phy_ofdm(dev, 0x24, 0x86); mdelay(1); + rtl8225se_write_phy_ofdm(dev, 0x05, 0xFB); mdelay(1); + break; + case 5: + rtl8225se_write_phy_ofdm(dev, 0x17, 0x46); mdelay(1); + rtl8225se_write_phy_ofdm(dev, 0x24, 0x96); mdelay(1); + rtl8225se_write_phy_ofdm(dev, 0x05, 0xFB); mdelay(1); + break; + case 6: + rtl8225se_write_phy_ofdm(dev, 0x17, 0x56); mdelay(1); + rtl8225se_write_phy_ofdm(dev, 0x24, 0x96); mdelay(1); + rtl8225se_write_phy_ofdm(dev, 0x05, 0xFC); mdelay(1); + break; + case 7: + rtl8225se_write_phy_ofdm(dev, 0x17, 0x56); mdelay(1); + rtl8225se_write_phy_ofdm(dev, 0x24, 0xA6); mdelay(1); + rtl8225se_write_phy_ofdm(dev, 0x05, 0xFC); mdelay(1); + break; + case 8: + rtl8225se_write_phy_ofdm(dev, 0x17, 0x66); mdelay(1); + rtl8225se_write_phy_ofdm(dev, 0x24, 0xB6); mdelay(1); + rtl8225se_write_phy_ofdm(dev, 0x05, 0xFC); mdelay(1); + break; + } +} + +void rtl8225se_rf_init(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + u32 rf23, rf24; + u8 d_cut = 0; + u8 tmp; + + /* Page 1 */ + rtl8187se_rf_writereg(dev, 0x00, 0x013F); mdelay(1); + rf23 = rtl8187se_rf_readreg(dev, 0x08); mdelay(1); + rf24 = rtl8187se_rf_readreg(dev, 0x09); mdelay(1); + if (rf23 == 0x0818 && rf24 == 0x070C) + d_cut = 1; + + wiphy_info(dev->wiphy, "RTL8225-SE version %s\n", + d_cut ? "D" : "not-D"); + + /* Page 0: reg 0 - 15 */ + rtl8187se_rf_writereg(dev, 0x00, 0x009F); mdelay(1); + rtl8187se_rf_writereg(dev, 0x01, 0x06E0); mdelay(1); + rtl8187se_rf_writereg(dev, 0x02, 0x004D); mdelay(1); + rtl8187se_rf_writereg(dev, 0x03, 0x07F1); mdelay(1); + rtl8187se_rf_writereg(dev, 0x04, 0x0975); mdelay(1); + rtl8187se_rf_writereg(dev, 0x05, 0x0C72); mdelay(1); + rtl8187se_rf_writereg(dev, 0x06, 0x0AE6); mdelay(1); + rtl8187se_rf_writereg(dev, 0x07, 0x00CA); mdelay(1); + rtl8187se_rf_writereg(dev, 0x08, 0x0E1C); mdelay(1); + rtl8187se_rf_writereg(dev, 0x09, 0x02F0); mdelay(1); + rtl8187se_rf_writereg(dev, 0x0A, 0x09D0); mdelay(1); + rtl8187se_rf_writereg(dev, 0x0B, 0x01BA); mdelay(1); + rtl8187se_rf_writereg(dev, 0x0C, 0x0640); mdelay(1); + rtl8187se_rf_writereg(dev, 0x0D, 0x08DF); mdelay(1); + rtl8187se_rf_writereg(dev, 0x0E, 0x0020); mdelay(1); + rtl8187se_rf_writereg(dev, 0x0F, 0x0990); mdelay(1); + /* page 1: reg 16-30 */ + rtl8187se_rf_writereg(dev, 0x00, 0x013F); mdelay(1); + rtl8187se_rf_writereg(dev, 0x03, 0x0806); mdelay(1); + rtl8187se_rf_writereg(dev, 0x04, 0x03A7); mdelay(1); + rtl8187se_rf_writereg(dev, 0x05, 0x059B); mdelay(1); + rtl8187se_rf_writereg(dev, 0x06, 0x0081); mdelay(1); + rtl8187se_rf_writereg(dev, 0x07, 0x01A0); mdelay(1); + rtl8187se_rf_writereg(dev, 0x0A, 0x0001); mdelay(1); + rtl8187se_rf_writereg(dev, 0x0B, 0x0418); mdelay(1); + rtl8187se_rf_writereg(dev, 0x0C, 0x0FBE); mdelay(1); + rtl8187se_rf_writereg(dev, 0x0D, 0x0008); mdelay(1); + if (d_cut) + rtl8187se_rf_writereg(dev, 0x0E, 0x0807); + else + rtl8187se_rf_writereg(dev, 0x0E, 0x0806); + mdelay(1); + rtl8187se_rf_writereg(dev, 0x0F, 0x0ACC); mdelay(1); + rtl8187se_rf_writereg(dev, 0x00, 0x01D7); mdelay(1); + rtl8187se_rf_writereg(dev, 0x03, 0x0E00); mdelay(1); + rtl8187se_rf_writereg(dev, 0x04, 0x0E50); mdelay(1); + + rtl8187se_write_rf_gain(dev); + + rtl8187se_rf_writereg(dev, 0x05, 0x0203); mdelay(1); + rtl8187se_rf_writereg(dev, 0x06, 0x0200); mdelay(1); + rtl8187se_rf_writereg(dev, 0x00, 0x0137); mdelay(11); + rtl8187se_rf_writereg(dev, 0x0D, 0x0008); mdelay(11); + rtl8187se_rf_writereg(dev, 0x00, 0x0037); mdelay(11); + rtl8187se_rf_writereg(dev, 0x04, 0x0160); mdelay(11); + rtl8187se_rf_writereg(dev, 0x07, 0x0080); mdelay(11); + rtl8187se_rf_writereg(dev, 0x02, 0x088D); msleep(221); + rtl8187se_rf_writereg(dev, 0x00, 0x0137); mdelay(11); + rtl8187se_rf_writereg(dev, 0x07, 0x0000); mdelay(1); + rtl8187se_rf_writereg(dev, 0x07, 0x0180); mdelay(1); + rtl8187se_rf_writereg(dev, 0x07, 0x0220); mdelay(1); + rtl8187se_rf_writereg(dev, 0x07, 0x03E0); mdelay(1); + rtl8187se_rf_writereg(dev, 0x06, 0x00C1); mdelay(1); + rtl8187se_rf_writereg(dev, 0x0A, 0x0001); mdelay(1); + if (priv->xtal_cal) { + tmp = (priv->xtal_in << 4) | (priv->xtal_out << 1) | + (1 << 11) | (1 << 9); + rtl8187se_rf_writereg(dev, 0x0F, tmp); + wiphy_info(dev->wiphy, "Xtal cal\n"); + mdelay(1); + } else { + wiphy_info(dev->wiphy, "NO Xtal cal\n"); + rtl8187se_rf_writereg(dev, 0x0F, 0x0ACC); + mdelay(1); + } + /* page 0 */ + rtl8187se_rf_writereg(dev, 0x00, 0x00BF); mdelay(1); + rtl8187se_rf_writereg(dev, 0x0D, 0x08DF); mdelay(1); + rtl8187se_rf_writereg(dev, 0x02, 0x004D); mdelay(1); + rtl8187se_rf_writereg(dev, 0x04, 0x0975); msleep(31); + rtl8187se_rf_writereg(dev, 0x00, 0x0197); mdelay(1); + rtl8187se_rf_writereg(dev, 0x05, 0x05AB); mdelay(1); + + rtl8187se_rf_writereg(dev, 0x00, 0x009F); mdelay(1); + rtl8187se_rf_writereg(dev, 0x01, 0x0000); mdelay(1); + rtl8187se_rf_writereg(dev, 0x02, 0x0000); mdelay(1); + /* power save parameters */ + /* TODO: move to dev.c */ + rtl818x_iowrite8(priv, REG_ADDR1(0x024E), + rtl818x_ioread8(priv, REG_ADDR1(0x24E)) & 0x9F); + rtl8225se_write_phy_cck(dev, 0x00, 0xC8); + rtl8225se_write_phy_cck(dev, 0x06, 0x1C); + rtl8225se_write_phy_cck(dev, 0x10, 0x78); + rtl8225se_write_phy_cck(dev, 0x2E, 0xD0); + rtl8225se_write_phy_cck(dev, 0x2F, 0x06); + rtl8225se_write_phy_cck(dev, 0x01, 0x46); + + /* power control */ + rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK, 0x10); + rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM, 0x1B); + + rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03); + rtl8225se_write_phy_ofdm(dev, 0x00, 0x12); + + rtl8225se_write_zebra_agc(dev); + + rtl8225se_write_phy_ofdm(dev, 0x10, 0x00); + + rtl8187se_write_ofdm_config(dev); + + /* turn on RF */ + rtl8187se_rf_writereg(dev, 0x00, 0x009F); udelay(500); + rtl8187se_rf_writereg(dev, 0x04, 0x0972); udelay(500); + /* turn on RF again */ + rtl8187se_rf_writereg(dev, 0x00, 0x009F); udelay(500); + rtl8187se_rf_writereg(dev, 0x04, 0x0972); udelay(500); + /* turn on BB */ + rtl8225se_write_phy_ofdm(dev, 0x10, 0x40); + rtl8225se_write_phy_ofdm(dev, 0x12, 0x40); + + rtl8187se_write_initial_gain(dev, 4); +} + +void rtl8225se_rf_stop(struct ieee80211_hw *dev) +{ + /* checked for 8187se */ + struct rtl8180_priv *priv = dev->priv; + + /* turn off BB RXIQ matrix to cut off rx signal */ + rtl8225se_write_phy_ofdm(dev, 0x10, 0x00); + rtl8225se_write_phy_ofdm(dev, 0x12, 0x00); + /* turn off RF */ + rtl8187se_rf_writereg(dev, 0x04, 0x0000); + rtl8187se_rf_writereg(dev, 0x00, 0x0000); + + usleep_range(1000, 5000); + /* turn off A/D and D/A */ + rtl8180_set_anaparam(priv, RTL8225SE_ANAPARAM_OFF); + rtl8180_set_anaparam2(priv, RTL8225SE_ANAPARAM2_OFF); +} + +void rtl8225se_rf_set_channel(struct ieee80211_hw *dev, + struct ieee80211_conf *conf) +{ + int chan = + ieee80211_frequency_to_channel(conf->chandef.chan->center_freq); + + rtl8225sez2_rf_set_tx_power(dev, chan); + rtl8187se_rf_writereg(dev, 0x7, rtl8225se_chan[chan - 1]); + if ((rtl8187se_rf_readreg(dev, 0x7) & 0x0F80) != + rtl8225se_chan[chan - 1]) + rtl8187se_rf_writereg(dev, 0x7, rtl8225se_chan[chan - 1]); + usleep_range(10000, 20000); +} + +static const struct rtl818x_rf_ops rtl8225se_ops = { + .name = "rtl8225-se", + .init = rtl8225se_rf_init, + .stop = rtl8225se_rf_stop, + .set_chan = rtl8225se_rf_set_channel, +}; + +const struct rtl818x_rf_ops *rtl8187se_detect_rf(struct ieee80211_hw *dev) +{ + return &rtl8225se_ops; +} diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8225se.h b/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8225se.h new file mode 100644 index 000000000..f00972661 --- /dev/null +++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8225se.h @@ -0,0 +1,58 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +/* Definitions for RTL8187SE hardware + * + * Copyright 2009 Larry Finger <Larry.Finger@lwfinger.net> + * Copyright 2014 Andrea Merello <andrea.merello@gmail.com> + * + * Based on the r8180 and Realtek r8187se drivers, which are: + * Copyright 2004-2005 Andrea Merello <andrea.merello@gmail.com>, et al. + * + * Also based on the rtl8187 driver, which is: + * Copyright 2007 Michael Wu <flamingice@sourmilk.net> + * Copyright 2007 Andrea Merello <andrea.merello@gmail.com> + */ + +#ifndef RTL8187SE_RTL8225_H +#define RTL8187SE_RTL8225_H + +#define RTL8225SE_ANAPARAM_ON 0xb0054d00 +#define RTL8225SE_ANAPARAM2_ON 0x000004c6 + +/* all off except PLL */ +#define RTL8225SE_ANAPARAM_OFF 0xb0054dec +/* all on including PLL */ +#define RTL8225SE_ANAPARAM_OFF2 0xb0054dfc + +#define RTL8225SE_ANAPARAM2_OFF 0x00ff04c6 + +#define RTL8225SE_ANAPARAM3 0x10 + +enum rtl8187se_power_state { + RTL8187SE_POWER_ON, + RTL8187SE_POWER_OFF, + RTL8187SE_POWER_SLEEP +}; + +static inline void rtl8225se_write_phy_ofdm(struct ieee80211_hw *dev, + u8 addr, u8 data) +{ + rtl8180_write_phy(dev, addr, data); +} + +static inline void rtl8225se_write_phy_cck(struct ieee80211_hw *dev, + u8 addr, u8 data) +{ + rtl8180_write_phy(dev, addr, data | 0x10000); +} + + +const struct rtl818x_rf_ops *rtl8187se_detect_rf(struct ieee80211_hw *); +void rtl8225se_rf_stop(struct ieee80211_hw *dev); +void rtl8225se_rf_set_channel(struct ieee80211_hw *dev, + struct ieee80211_conf *conf); +void rtl8225se_rf_conf_erp(struct ieee80211_hw *dev, + struct ieee80211_bss_conf *info); +void rtl8225se_rf_init(struct ieee80211_hw *dev); + +#endif /* RTL8187SE_RTL8225_H */ diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/sa2400.c b/drivers/net/wireless/realtek/rtl818x/rtl8180/sa2400.c new file mode 100644 index 000000000..dd12f5cdb --- /dev/null +++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/sa2400.c @@ -0,0 +1,225 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/* + * Radio tuning for Philips SA2400 on RTL8180 + * + * Copyright 2007 Andrea Merello <andrea.merello@gmail.com> + * + * Code from the BSD driver and the rtl8181 project have been + * very useful to understand certain things + * + * I want to thanks the Authors of such projects and the Ndiswrapper + * project Authors. + * + * A special Big Thanks also is for all people who donated me cards, + * making possible the creation of the original rtl8180 driver + * from which this code is derived! + */ + +#include <linux/pci.h> +#include <linux/delay.h> +#include <net/mac80211.h> + +#include "rtl8180.h" +#include "sa2400.h" + +static const u32 sa2400_chan[] = { + 0x00096c, /* ch1 */ + 0x080970, + 0x100974, + 0x180978, + 0x000980, + 0x080984, + 0x100988, + 0x18098c, + 0x000994, + 0x080998, + 0x10099c, + 0x1809a0, + 0x0009a8, + 0x0009b4, /* ch 14 */ +}; + +static void write_sa2400(struct ieee80211_hw *dev, u8 addr, u32 data) +{ + struct rtl8180_priv *priv = dev->priv; + u32 phy_config; + + /* MAC will bang bits to the sa2400. sw 3-wire is NOT used */ + phy_config = 0xb0000000; + + phy_config |= ((u32)(addr & 0xf)) << 24; + phy_config |= data & 0xffffff; + + rtl818x_iowrite32(priv, + (__le32 __iomem *) &priv->map->RFPinsOutput, phy_config); + + msleep(3); +} + +static void sa2400_write_phy_antenna(struct ieee80211_hw *dev, short chan) +{ + struct rtl8180_priv *priv = dev->priv; + u8 ant = SA2400_ANTENNA; + + if (priv->rfparam & RF_PARAM_ANTBDEFAULT) + ant |= BB_ANTENNA_B; + + if (chan == 14) + ant |= BB_ANTATTEN_CHAN14; + + rtl8180_write_phy(dev, 0x10, ant); + +} + +static u8 sa2400_rf_rssi_map[] = { + 0x64, 0x64, 0x63, 0x62, 0x61, 0x60, 0x5f, 0x5e, + 0x5d, 0x5c, 0x5b, 0x5a, 0x57, 0x54, 0x52, 0x50, + 0x4e, 0x4c, 0x4a, 0x48, 0x46, 0x44, 0x41, 0x3f, + 0x3c, 0x3a, 0x37, 0x36, 0x36, 0x1c, 0x1c, 0x1b, + 0x1b, 0x1a, 0x1a, 0x19, 0x19, 0x18, 0x18, 0x17, + 0x17, 0x16, 0x16, 0x15, 0x15, 0x14, 0x14, 0x13, + 0x13, 0x12, 0x12, 0x11, 0x11, 0x10, 0x10, 0x0f, + 0x0f, 0x0e, 0x0e, 0x0d, 0x0d, 0x0c, 0x0c, 0x0b, + 0x0b, 0x0a, 0x0a, 0x09, 0x09, 0x08, 0x08, 0x07, + 0x07, 0x06, 0x06, 0x05, 0x04, 0x03, 0x02, +}; + +static u8 sa2400_rf_calc_rssi(u8 agc, u8 sq) +{ + if (sq == 0x80) + return 1; + + if (sq > 78) + return 32; + + /* TODO: recalc sa2400_rf_rssi_map to avoid mult / div */ + return 65 * sa2400_rf_rssi_map[sq] / 100; +} + +static void sa2400_rf_set_channel(struct ieee80211_hw *dev, + struct ieee80211_conf *conf) +{ + struct rtl8180_priv *priv = dev->priv; + int channel = + ieee80211_frequency_to_channel(conf->chandef.chan->center_freq); + u32 txpw = priv->channels[channel - 1].hw_value & 0xFF; + u32 chan = sa2400_chan[channel - 1]; + + write_sa2400(dev, 7, txpw); + + sa2400_write_phy_antenna(dev, channel); + + write_sa2400(dev, 0, chan); + write_sa2400(dev, 1, 0xbb50); + write_sa2400(dev, 2, 0x80); + write_sa2400(dev, 3, 0); +} + +static void sa2400_rf_stop(struct ieee80211_hw *dev) +{ + write_sa2400(dev, 4, 0); +} + +static void sa2400_rf_init(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + u32 anaparam, txconf; + u8 firdac; + int analogphy = priv->rfparam & RF_PARAM_ANALOGPHY; + + anaparam = priv->anaparam; + anaparam &= ~(1 << ANAPARAM_TXDACOFF_SHIFT); + anaparam &= ~ANAPARAM_PWR1_MASK; + anaparam &= ~ANAPARAM_PWR0_MASK; + + if (analogphy) { + anaparam |= SA2400_ANA_ANAPARAM_PWR1_ON << ANAPARAM_PWR1_SHIFT; + firdac = 0; + } else { + anaparam |= (SA2400_DIG_ANAPARAM_PWR1_ON << ANAPARAM_PWR1_SHIFT); + anaparam |= (SA2400_ANAPARAM_PWR0_ON << ANAPARAM_PWR0_SHIFT); + firdac = 1 << SA2400_REG4_FIRDAC_SHIFT; + } + + rtl8180_set_anaparam(priv, anaparam); + + write_sa2400(dev, 0, sa2400_chan[0]); + write_sa2400(dev, 1, 0xbb50); + write_sa2400(dev, 2, 0x80); + write_sa2400(dev, 3, 0); + write_sa2400(dev, 4, 0x19340 | firdac); + write_sa2400(dev, 5, 0x1dfb | (SA2400_MAX_SENS - 54) << 15); + write_sa2400(dev, 4, 0x19348 | firdac); /* calibrate VCO */ + + if (!analogphy) + write_sa2400(dev, 4, 0x1938c); /*???*/ + + write_sa2400(dev, 4, 0x19340 | firdac); + + write_sa2400(dev, 0, sa2400_chan[0]); + write_sa2400(dev, 1, 0xbb50); + write_sa2400(dev, 2, 0x80); + write_sa2400(dev, 3, 0); + write_sa2400(dev, 4, 0x19344 | firdac); /* calibrate filter */ + + /* new from rtl8180 embedded driver (rtl8181 project) */ + write_sa2400(dev, 6, 0x13ff | (1 << 23)); /* MANRX */ + write_sa2400(dev, 8, 0); /* VCO */ + + if (analogphy) { + rtl8180_set_anaparam(priv, anaparam | + (1 << ANAPARAM_TXDACOFF_SHIFT)); + + txconf = rtl818x_ioread32(priv, &priv->map->TX_CONF); + rtl818x_iowrite32(priv, &priv->map->TX_CONF, + txconf | RTL818X_TX_CONF_LOOPBACK_CONT); + + write_sa2400(dev, 4, 0x19341); /* calibrates DC */ + + /* a 5us sleep is required here, + * we rely on the 3ms delay introduced in write_sa2400 */ + write_sa2400(dev, 4, 0x19345); + + /* a 20us sleep is required here, + * we rely on the 3ms delay introduced in write_sa2400 */ + + rtl818x_iowrite32(priv, &priv->map->TX_CONF, txconf); + + rtl8180_set_anaparam(priv, anaparam); + } + /* end new code */ + + write_sa2400(dev, 4, 0x19341 | firdac); /* RTX MODE */ + + /* baseband configuration */ + rtl8180_write_phy(dev, 0, 0x98); + rtl8180_write_phy(dev, 3, 0x38); + rtl8180_write_phy(dev, 4, 0xe0); + rtl8180_write_phy(dev, 5, 0x90); + rtl8180_write_phy(dev, 6, 0x1a); + rtl8180_write_phy(dev, 7, 0x64); + + sa2400_write_phy_antenna(dev, 1); + + rtl8180_write_phy(dev, 0x11, 0x80); + + if (rtl818x_ioread8(priv, &priv->map->CONFIG2) & + RTL818X_CONFIG2_ANTENNA_DIV) + rtl8180_write_phy(dev, 0x12, 0xc7); /* enable ant diversity */ + else + rtl8180_write_phy(dev, 0x12, 0x47); /* disable ant diversity */ + + rtl8180_write_phy(dev, 0x13, 0x90 | priv->csthreshold); + + rtl8180_write_phy(dev, 0x19, 0x0); + rtl8180_write_phy(dev, 0x1a, 0xa0); +} + +const struct rtl818x_rf_ops sa2400_rf_ops = { + .name = "Philips", + .init = sa2400_rf_init, + .stop = sa2400_rf_stop, + .set_chan = sa2400_rf_set_channel, + .calc_rssi = sa2400_rf_calc_rssi, +}; diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/sa2400.h b/drivers/net/wireless/realtek/rtl818x/rtl8180/sa2400.h new file mode 100644 index 000000000..ef6565b20 --- /dev/null +++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/sa2400.h @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +#ifndef RTL8180_SA2400_H +#define RTL8180_SA2400_H + +/* + * Radio tuning for Philips SA2400 on RTL8180 + * + * Copyright 2007 Andrea Merello <andrea.merello@gmail.com> + * + * Code from the BSD driver and the rtl8181 project have been + * very useful to understand certain things + * + * I want to thanks the Authors of such projects and the Ndiswrapper + * project Authors. + * + * A special Big Thanks also is for all people who donated me cards, + * making possible the creation of the original rtl8180 driver + * from which this code is derived! + */ + +#define SA2400_ANTENNA 0x91 +#define SA2400_DIG_ANAPARAM_PWR1_ON 0x8 +#define SA2400_ANA_ANAPARAM_PWR1_ON 0x28 +#define SA2400_ANAPARAM_PWR0_ON 0x3 + +/* RX sensitivity in dbm */ +#define SA2400_MAX_SENS 85 + +#define SA2400_REG4_FIRDAC_SHIFT 7 + +extern const struct rtl818x_rf_ops sa2400_rf_ops; + +#endif /* RTL8180_SA2400_H */ |