1 files changed, 142 insertions, 0 deletions
diff --git a/drivers/net/wireless/realtek/rtlwifi/usb.h b/drivers/net/wireless/realtek/rtlwifi/usb.h
new file mode 100644
index 000000000..3bf85b23e
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtlwifi/usb.h
@@ -0,0 +1,142 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright(c) 2009-2012  Realtek Corporation.*/
+
+#ifndef __RTL_USB_H__
+#define __RTL_USB_H__
+
+#include <linux/skbuff.h>
+
+#define RTL_RX_DESC_SIZE		24
+
+#define RTL_USB_DEVICE(vend, prod, cfg) \
+	.match_flags = USB_DEVICE_ID_MATCH_DEVICE, \
+	.idVendor = (vend), \
+	.idProduct = (prod), \
+	.driver_info = (kernel_ulong_t)&(cfg)
+
+#define USB_HIGH_SPEED_BULK_SIZE	512
+#define USB_FULL_SPEED_BULK_SIZE	64
+
+#define RTL_USB_MAX_TXQ_NUM		4		/* max tx queue */
+#define RTL_USB_MAX_EP_NUM		6		/* max ep number */
+#define RTL_USB_MAX_TX_URBS_NUM		8
+
+enum rtl_txq {
+	/* These definitions shall be consistent with value
+	 * returned by skb_get_queue_mapping
+	 *------------------------------------*/
+	RTL_TXQ_BK,
+	RTL_TXQ_BE,
+	RTL_TXQ_VI,
+	RTL_TXQ_VO,
+	/*------------------------------------*/
+	RTL_TXQ_BCN,
+	RTL_TXQ_MGT,
+	RTL_TXQ_HI,
+
+	/* Must be last */
+	__RTL_TXQ_NUM,
+};
+
+struct rtl_ep_map {
+	u32 ep_mapping[__RTL_TXQ_NUM];
+};
+
+struct _trx_info {
+	struct rtl_usb *rtlusb;
+	u32 ep_num;
+};
+
+static inline void _rtl_install_trx_info(struct rtl_usb *rtlusb,
+					 struct sk_buff *skb,
+					 u32 ep_num)
+{
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+
+	info->rate_driver_data[0] = rtlusb;
+	info->rate_driver_data[1] = (void *)(__kernel_size_t)ep_num;
+}
+
+/*  Add suspend/resume later */
+enum rtl_usb_state {
+	USB_STATE_STOP	= 0,
+	USB_STATE_START	= 1,
+};
+
+#define IS_USB_STOP(rtlusb_ptr) (USB_STATE_STOP == (rtlusb_ptr)->state)
+#define IS_USB_START(rtlusb_ptr) (USB_STATE_START == (rtlusb_ptr)->state)
+#define SET_USB_STOP(rtlusb_ptr) \
+	do {							\
+		(rtlusb_ptr)->state = USB_STATE_STOP;		\
+	} while (0)
+
+#define SET_USB_START(rtlusb_ptr)				\
+	do { \
+		(rtlusb_ptr)->state = USB_STATE_START;		\
+	} while (0)
+
+struct rtl_usb {
+	struct usb_device *udev;
+	struct usb_interface *intf;
+	enum rtl_usb_state state;
+
+	/* Bcn control register setting */
+	u32 reg_bcn_ctrl_val;
+	/* for 88/92cu card disable */
+	u8	disablehwsm;
+	/*QOS & EDCA */
+	enum acm_method acm_method;
+	/* irq  . HIMR,HIMR_EX */
+	u32 irq_mask[2];
+	bool irq_enabled;
+
+	u16 (*usb_mq_to_hwq)(__le16 fc, u16 mac80211_queue_index);
+
+	/* Tx */
+	u8 out_ep_nums ;
+	u8 out_queue_sel;
+	struct rtl_ep_map ep_map;
+
+	u32 max_bulk_out_size;
+	u32 tx_submitted_urbs;
+	struct sk_buff_head tx_skb_queue[RTL_USB_MAX_EP_NUM];
+
+	struct usb_anchor tx_pending[RTL_USB_MAX_EP_NUM];
+	struct usb_anchor tx_submitted;
+
+	struct sk_buff *(*usb_tx_aggregate_hdl)(struct ieee80211_hw *,
+						struct sk_buff_head *);
+	int (*usb_tx_post_hdl)(struct ieee80211_hw *,
+			       struct urb *, struct sk_buff *);
+	void (*usb_tx_cleanup)(struct ieee80211_hw *, struct sk_buff *);
+
+	/* Rx */
+	u8 in_ep_nums;
+	u32 in_ep;		/* Bulk IN endpoint number */
+	u32 rx_max_size;	/* Bulk IN max buffer size */
+	u32 rx_urb_num;		/* How many Bulk INs are submitted to host. */
+	struct usb_anchor	rx_submitted;
+	struct usb_anchor	rx_cleanup_urbs;
+	struct tasklet_struct   rx_work_tasklet;
+	struct sk_buff_head	rx_queue;
+	void (*usb_rx_segregate_hdl)(struct ieee80211_hw *, struct sk_buff *,
+				     struct sk_buff_head *);
+	void (*usb_rx_hdl)(struct ieee80211_hw *, struct sk_buff *);
+};
+
+struct rtl_usb_priv {
+	struct bt_coexist_info bt_coexist;
+	struct rtl_usb dev;
+};
+
+#define rtl_usbpriv(hw)	 (((struct rtl_usb_priv *)(rtl_priv(hw))->priv))
+#define rtl_usbdev(usbpriv)	(&((usbpriv)->dev))
+
+int rtl_usb_probe(struct usb_interface *intf,
+		  const struct usb_device_id *id,
+		  struct rtl_hal_cfg *rtl92cu_hal_cfg);
+void rtl_usb_disconnect(struct usb_interface *intf);
+int rtl_usb_suspend(struct usb_interface *pusb_intf, pm_message_t message);
+int rtl_usb_resume(struct usb_interface *pusb_intf);
+
+#endif