diff options
Diffstat (limited to '')
19 files changed, 10848 insertions, 0 deletions
diff --git a/drivers/net/wireless/zydas/Kconfig b/drivers/net/wireless/zydas/Kconfig new file mode 100644 index 000000000..08574433d --- /dev/null +++ b/drivers/net/wireless/zydas/Kconfig @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: GPL-2.0-only +config WLAN_VENDOR_ZYDAS + bool "ZyDAS devices" + default y + help + If you have a wireless card belonging to this class, say Y. + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all the + questions about these cards. If you say Y, you will be asked for + your specific card in the following questions. + +if WLAN_VENDOR_ZYDAS + +config USB_ZD1201 + tristate "USB ZD1201 based Wireless device support" + depends on CFG80211 && USB + select WIRELESS_EXT + select WEXT_PRIV + select FW_LOADER + help + Say Y if you want to use wireless LAN adapters based on the ZyDAS + ZD1201 chip. + + This driver makes the adapter appear as a normal Ethernet interface, + typically on wlan0. + + The zd1201 device requires external firmware to be loaded. + This can be found at http://linux-lc100020.sourceforge.net/ + + To compile this driver as a module, choose M here: the + module will be called zd1201. + +source "drivers/net/wireless/zydas/zd1211rw/Kconfig" + +endif # WLAN_VENDOR_ZYDAS diff --git a/drivers/net/wireless/zydas/Makefile b/drivers/net/wireless/zydas/Makefile new file mode 100644 index 000000000..c70003d30 --- /dev/null +++ b/drivers/net/wireless/zydas/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only +obj-$(CONFIG_ZD1211RW) += zd1211rw/ + +obj-$(CONFIG_USB_ZD1201) += zd1201.o diff --git a/drivers/net/wireless/zydas/zd1201.c b/drivers/net/wireless/zydas/zd1201.c new file mode 100644 index 000000000..718c4ee86 --- /dev/null +++ b/drivers/net/wireless/zydas/zd1201.c @@ -0,0 +1,1905 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Driver for ZyDAS zd1201 based wireless USB devices. + * + * Copyright (c) 2004, 2005 Jeroen Vreeken (pe1rxq@amsat.org) + * + * Parts of this driver have been derived from a wlan-ng version + * modified by ZyDAS. They also made documentation available, thanks! + * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. + */ + +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/slab.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/wireless.h> +#include <net/cfg80211.h> +#include <net/iw_handler.h> +#include <linux/string.h> +#include <linux/if_arp.h> +#include <linux/firmware.h> +#include "zd1201.h" + +static const struct usb_device_id zd1201_table[] = { + {USB_DEVICE(0x0586, 0x3400)}, /* Peabird Wireless USB Adapter */ + {USB_DEVICE(0x0ace, 0x1201)}, /* ZyDAS ZD1201 Wireless USB Adapter */ + {USB_DEVICE(0x050d, 0x6051)}, /* Belkin F5D6051 usb adapter */ + {USB_DEVICE(0x0db0, 0x6823)}, /* MSI UB11B usb adapter */ + {USB_DEVICE(0x1044, 0x8004)}, /* Gigabyte GN-WLBZ101 */ + {USB_DEVICE(0x1044, 0x8005)}, /* GIGABYTE GN-WLBZ201 usb adapter */ + {} +}; + +static int ap; /* Are we an AP or a normal station? */ + +#define ZD1201_VERSION "0.15" + +MODULE_AUTHOR("Jeroen Vreeken <pe1rxq@amsat.org>"); +MODULE_DESCRIPTION("Driver for ZyDAS ZD1201 based USB Wireless adapters"); +MODULE_VERSION(ZD1201_VERSION); +MODULE_LICENSE("GPL"); +module_param(ap, int, 0); +MODULE_PARM_DESC(ap, "If non-zero Access Point firmware will be loaded"); +MODULE_DEVICE_TABLE(usb, zd1201_table); + + +static int zd1201_fw_upload(struct usb_device *dev, int apfw) +{ + const struct firmware *fw_entry; + const char *data; + unsigned long len; + int err; + unsigned char ret; + char *buf; + char *fwfile; + + if (apfw) + fwfile = "zd1201-ap.fw"; + else + fwfile = "zd1201.fw"; + + err = request_firmware(&fw_entry, fwfile, &dev->dev); + if (err) { + dev_err(&dev->dev, "Failed to load %s firmware file!\n", fwfile); + dev_err(&dev->dev, "Make sure the hotplug firmware loader is installed.\n"); + dev_err(&dev->dev, "Goto http://linux-lc100020.sourceforge.net for more info.\n"); + return err; + } + + data = fw_entry->data; + len = fw_entry->size; + + buf = kmalloc(1024, GFP_ATOMIC); + if (!buf) { + err = -ENOMEM; + goto exit; + } + + while (len > 0) { + int translen = (len > 1024) ? 1024 : len; + memcpy(buf, data, translen); + + err = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), 0, + USB_DIR_OUT | 0x40, 0, 0, buf, translen, + ZD1201_FW_TIMEOUT); + if (err < 0) + goto exit; + + len -= translen; + data += translen; + } + + err = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), 0x2, + USB_DIR_OUT | 0x40, 0, 0, NULL, 0, ZD1201_FW_TIMEOUT); + if (err < 0) + goto exit; + + err = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), 0x4, + USB_DIR_IN | 0x40, 0, 0, buf, sizeof(ret), ZD1201_FW_TIMEOUT); + if (err < 0) + goto exit; + + memcpy(&ret, buf, sizeof(ret)); + + if (ret & 0x80) { + err = -EIO; + goto exit; + } + + err = 0; +exit: + kfree(buf); + release_firmware(fw_entry); + return err; +} + +MODULE_FIRMWARE("zd1201-ap.fw"); +MODULE_FIRMWARE("zd1201.fw"); + +static void zd1201_usbfree(struct urb *urb) +{ + struct zd1201 *zd = urb->context; + + switch(urb->status) { + case -EILSEQ: + case -ENODEV: + case -ETIME: + case -ENOENT: + case -EPIPE: + case -EOVERFLOW: + case -ESHUTDOWN: + dev_warn(&zd->usb->dev, "%s: urb failed: %d\n", + zd->dev->name, urb->status); + } + + kfree(urb->transfer_buffer); + usb_free_urb(urb); +} + +/* cmdreq message: + u32 type + u16 cmd + u16 parm0 + u16 parm1 + u16 parm2 + u8 pad[4] + + total: 4 + 2 + 2 + 2 + 2 + 4 = 16 +*/ +static int zd1201_docmd(struct zd1201 *zd, int cmd, int parm0, + int parm1, int parm2) +{ + unsigned char *command; + int ret; + struct urb *urb; + + command = kmalloc(16, GFP_ATOMIC); + if (!command) + return -ENOMEM; + + *((__le32*)command) = cpu_to_le32(ZD1201_USB_CMDREQ); + *((__le16*)&command[4]) = cpu_to_le16(cmd); + *((__le16*)&command[6]) = cpu_to_le16(parm0); + *((__le16*)&command[8]) = cpu_to_le16(parm1); + *((__le16*)&command[10])= cpu_to_le16(parm2); + + urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!urb) { + kfree(command); + return -ENOMEM; + } + usb_fill_bulk_urb(urb, zd->usb, usb_sndbulkpipe(zd->usb, zd->endp_out2), + command, 16, zd1201_usbfree, zd); + ret = usb_submit_urb(urb, GFP_ATOMIC); + if (ret) { + kfree(command); + usb_free_urb(urb); + } + + return ret; +} + +/* Callback after sending out a packet */ +static void zd1201_usbtx(struct urb *urb) +{ + struct zd1201 *zd = urb->context; + netif_wake_queue(zd->dev); +} + +/* Incoming data */ +static void zd1201_usbrx(struct urb *urb) +{ + struct zd1201 *zd = urb->context; + int free = 0; + unsigned char *data = urb->transfer_buffer; + struct sk_buff *skb; + unsigned char type; + + if (!zd) + return; + + switch(urb->status) { + case -EILSEQ: + case -ENODEV: + case -ETIME: + case -ENOENT: + case -EPIPE: + case -EOVERFLOW: + case -ESHUTDOWN: + dev_warn(&zd->usb->dev, "%s: rx urb failed: %d\n", + zd->dev->name, urb->status); + free = 1; + goto exit; + } + + if (urb->status != 0 || urb->actual_length == 0) + goto resubmit; + + type = data[0]; + if (type == ZD1201_PACKET_EVENTSTAT || type == ZD1201_PACKET_RESOURCE) { + memcpy(zd->rxdata, data, urb->actual_length); + zd->rxlen = urb->actual_length; + zd->rxdatas = 1; + wake_up(&zd->rxdataq); + } + /* Info frame */ + if (type == ZD1201_PACKET_INQUIRE) { + int i = 0; + unsigned short infotype, copylen; + infotype = le16_to_cpu(*(__le16*)&data[6]); + + if (infotype == ZD1201_INF_LINKSTATUS) { + short linkstatus; + + linkstatus = le16_to_cpu(*(__le16*)&data[8]); + switch(linkstatus) { + case 1: + netif_carrier_on(zd->dev); + break; + case 2: + netif_carrier_off(zd->dev); + break; + case 3: + netif_carrier_off(zd->dev); + break; + case 4: + netif_carrier_on(zd->dev); + break; + default: + netif_carrier_off(zd->dev); + } + goto resubmit; + } + if (infotype == ZD1201_INF_ASSOCSTATUS) { + short status = le16_to_cpu(*(__le16*)(data+8)); + int event; + union iwreq_data wrqu; + + switch (status) { + case ZD1201_ASSOCSTATUS_STAASSOC: + case ZD1201_ASSOCSTATUS_REASSOC: + event = IWEVREGISTERED; + break; + case ZD1201_ASSOCSTATUS_DISASSOC: + case ZD1201_ASSOCSTATUS_ASSOCFAIL: + case ZD1201_ASSOCSTATUS_AUTHFAIL: + default: + event = IWEVEXPIRED; + } + memcpy(wrqu.addr.sa_data, data+10, ETH_ALEN); + wrqu.addr.sa_family = ARPHRD_ETHER; + + /* Send event to user space */ + wireless_send_event(zd->dev, event, &wrqu, NULL); + + goto resubmit; + } + if (infotype == ZD1201_INF_AUTHREQ) { + union iwreq_data wrqu; + + memcpy(wrqu.addr.sa_data, data+8, ETH_ALEN); + wrqu.addr.sa_family = ARPHRD_ETHER; + /* There isn't a event that trully fits this request. + We assume that userspace will be smart enough to + see a new station being expired and sends back a + authstation ioctl to authorize it. */ + wireless_send_event(zd->dev, IWEVEXPIRED, &wrqu, NULL); + goto resubmit; + } + /* Other infotypes are handled outside this handler */ + zd->rxlen = 0; + while (i < urb->actual_length) { + copylen = le16_to_cpu(*(__le16*)&data[i+2]); + /* Sanity check, sometimes we get junk */ + if (copylen+zd->rxlen > sizeof(zd->rxdata)) + break; + memcpy(zd->rxdata+zd->rxlen, data+i+4, copylen); + zd->rxlen += copylen; + i += 64; + } + if (i >= urb->actual_length) { + zd->rxdatas = 1; + wake_up(&zd->rxdataq); + } + goto resubmit; + } + /* Actual data */ + if (data[urb->actual_length-1] == ZD1201_PACKET_RXDATA) { + int datalen = urb->actual_length-1; + unsigned short len, fc, seq; + + len = ntohs(*(__be16 *)&data[datalen-2]); + if (len>datalen) + len=datalen; + fc = le16_to_cpu(*(__le16 *)&data[datalen-16]); + seq = le16_to_cpu(*(__le16 *)&data[datalen-24]); + + if (zd->monitor) { + if (datalen < 24) + goto resubmit; + if (!(skb = dev_alloc_skb(datalen+24))) + goto resubmit; + + skb_put_data(skb, &data[datalen - 16], 2); + skb_put_data(skb, &data[datalen - 2], 2); + skb_put_data(skb, &data[datalen - 14], 6); + skb_put_data(skb, &data[datalen - 22], 6); + skb_put_data(skb, &data[datalen - 8], 6); + skb_put_data(skb, &data[datalen - 24], 2); + skb_put_data(skb, data, len); + skb->protocol = eth_type_trans(skb, zd->dev); + zd->dev->stats.rx_packets++; + zd->dev->stats.rx_bytes += skb->len; + netif_rx(skb); + goto resubmit; + } + + if ((seq & IEEE80211_SCTL_FRAG) || + (fc & IEEE80211_FCTL_MOREFRAGS)) { + struct zd1201_frag *frag = NULL; + char *ptr; + + if (datalen<14) + goto resubmit; + if ((seq & IEEE80211_SCTL_FRAG) == 0) { + frag = kmalloc(sizeof(*frag), GFP_ATOMIC); + if (!frag) + goto resubmit; + skb = dev_alloc_skb(IEEE80211_MAX_DATA_LEN +14+2); + if (!skb) { + kfree(frag); + goto resubmit; + } + frag->skb = skb; + frag->seq = seq & IEEE80211_SCTL_SEQ; + skb_reserve(skb, 2); + skb_put_data(skb, &data[datalen - 14], 12); + skb_put_data(skb, &data[6], 2); + skb_put_data(skb, data + 8, len); + hlist_add_head(&frag->fnode, &zd->fraglist); + goto resubmit; + } + hlist_for_each_entry(frag, &zd->fraglist, fnode) + if (frag->seq == (seq&IEEE80211_SCTL_SEQ)) + break; + if (!frag) + goto resubmit; + skb = frag->skb; + ptr = skb_put(skb, len); + if (ptr) + memcpy(ptr, data+8, len); + if (fc & IEEE80211_FCTL_MOREFRAGS) + goto resubmit; + hlist_del_init(&frag->fnode); + kfree(frag); + } else { + if (datalen<14) + goto resubmit; + skb = dev_alloc_skb(len + 14 + 2); + if (!skb) + goto resubmit; + skb_reserve(skb, 2); + skb_put_data(skb, &data[datalen - 14], 12); + skb_put_data(skb, &data[6], 2); + skb_put_data(skb, data + 8, len); + } + skb->protocol = eth_type_trans(skb, zd->dev); + zd->dev->stats.rx_packets++; + zd->dev->stats.rx_bytes += skb->len; + netif_rx(skb); + } +resubmit: + memset(data, 0, ZD1201_RXSIZE); + + urb->status = 0; + urb->dev = zd->usb; + if(usb_submit_urb(urb, GFP_ATOMIC)) + free = 1; + +exit: + if (free) { + zd->rxlen = 0; + zd->rxdatas = 1; + wake_up(&zd->rxdataq); + kfree(urb->transfer_buffer); + } +} + +static int zd1201_getconfig(struct zd1201 *zd, int rid, void *riddata, + unsigned int riddatalen) +{ + int err; + int i = 0; + int code; + int rid_fid; + int length; + unsigned char *pdata; + + zd->rxdatas = 0; + err = zd1201_docmd(zd, ZD1201_CMDCODE_ACCESS, rid, 0, 0); + if (err) + return err; + + wait_event_interruptible(zd->rxdataq, zd->rxdatas); + if (!zd->rxlen) + return -EIO; + + code = le16_to_cpu(*(__le16*)(&zd->rxdata[4])); + rid_fid = le16_to_cpu(*(__le16*)(&zd->rxdata[6])); + length = le16_to_cpu(*(__le16*)(&zd->rxdata[8])); + if (length > zd->rxlen) + length = zd->rxlen-6; + + /* If access bit is not on, then error */ + if ((code & ZD1201_ACCESSBIT) != ZD1201_ACCESSBIT || rid_fid != rid ) + return -EINVAL; + + /* Not enough buffer for allocating data */ + if (riddatalen != (length - 4)) { + dev_dbg(&zd->usb->dev, "riddatalen mismatches, expected=%u, (packet=%u) length=%u, rid=0x%04X, rid_fid=0x%04X\n", + riddatalen, zd->rxlen, length, rid, rid_fid); + return -ENODATA; + } + + zd->rxdatas = 0; + /* Issue SetRxRid commnd */ + err = zd1201_docmd(zd, ZD1201_CMDCODE_SETRXRID, rid, 0, length); + if (err) + return err; + + /* Receive RID record from resource packets */ + wait_event_interruptible(zd->rxdataq, zd->rxdatas); + if (!zd->rxlen) + return -EIO; + + if (zd->rxdata[zd->rxlen - 1] != ZD1201_PACKET_RESOURCE) { + dev_dbg(&zd->usb->dev, "Packet type mismatch: 0x%x not 0x3\n", + zd->rxdata[zd->rxlen-1]); + return -EINVAL; + } + + /* Set the data pointer and received data length */ + pdata = zd->rxdata; + length = zd->rxlen; + + do { + int actual_length; + + actual_length = (length > 64) ? 64 : length; + + if (pdata[0] != 0x3) { + dev_dbg(&zd->usb->dev, "Rx Resource packet type error: %02X\n", + pdata[0]); + return -EINVAL; + } + + if (actual_length != 64) { + /* Trim the last packet type byte */ + actual_length--; + } + + /* Skip the 4 bytes header (RID length and RID) */ + if (i == 0) { + pdata += 8; + actual_length -= 8; + } else { + pdata += 4; + actual_length -= 4; + } + + memcpy(riddata, pdata, actual_length); + riddata += actual_length; + pdata += actual_length; + length -= 64; + i++; + } while (length > 0); + + return 0; +} + +/* + * resreq: + * byte type + * byte sequence + * u16 reserved + * byte data[12] + * total: 16 + */ +static int zd1201_setconfig(struct zd1201 *zd, int rid, void *buf, int len, int wait) +{ + int err; + unsigned char *request; + int reqlen; + char seq=0; + struct urb *urb; + gfp_t gfp_mask = wait ? GFP_NOIO : GFP_ATOMIC; + + len += 4; /* first 4 are for header */ + + zd->rxdatas = 0; + zd->rxlen = 0; + for (seq=0; len > 0; seq++) { + request = kmalloc(16, gfp_mask); + if (!request) + return -ENOMEM; + urb = usb_alloc_urb(0, gfp_mask); + if (!urb) { + kfree(request); + return -ENOMEM; + } + memset(request, 0, 16); + reqlen = len>12 ? 12 : len; + request[0] = ZD1201_USB_RESREQ; + request[1] = seq; + request[2] = 0; + request[3] = 0; + if (request[1] == 0) { + /* add header */ + *(__le16*)&request[4] = cpu_to_le16((len-2+1)/2); + *(__le16*)&request[6] = cpu_to_le16(rid); + memcpy(request+8, buf, reqlen-4); + buf += reqlen-4; + } else { + memcpy(request+4, buf, reqlen); + buf += reqlen; + } + + len -= reqlen; + + usb_fill_bulk_urb(urb, zd->usb, usb_sndbulkpipe(zd->usb, + zd->endp_out2), request, 16, zd1201_usbfree, zd); + err = usb_submit_urb(urb, gfp_mask); + if (err) + goto err; + } + + request = kmalloc(16, gfp_mask); + if (!request) + return -ENOMEM; + urb = usb_alloc_urb(0, gfp_mask); + if (!urb) { + kfree(request); + return -ENOMEM; + } + *((__le32*)request) = cpu_to_le32(ZD1201_USB_CMDREQ); + *((__le16*)&request[4]) = + cpu_to_le16(ZD1201_CMDCODE_ACCESS|ZD1201_ACCESSBIT); + *((__le16*)&request[6]) = cpu_to_le16(rid); + *((__le16*)&request[8]) = cpu_to_le16(0); + *((__le16*)&request[10]) = cpu_to_le16(0); + usb_fill_bulk_urb(urb, zd->usb, usb_sndbulkpipe(zd->usb, zd->endp_out2), + request, 16, zd1201_usbfree, zd); + err = usb_submit_urb(urb, gfp_mask); + if (err) + goto err; + + if (wait) { + wait_event_interruptible(zd->rxdataq, zd->rxdatas); + if (!zd->rxlen || le16_to_cpu(*(__le16*)&zd->rxdata[6]) != rid) { + dev_dbg(&zd->usb->dev, "wrong or no RID received\n"); + } + } + + return 0; +err: + kfree(request); + usb_free_urb(urb); + return err; +} + +static inline int zd1201_getconfig16(struct zd1201 *zd, int rid, short *val) +{ + int err; + __le16 zdval; + + err = zd1201_getconfig(zd, rid, &zdval, sizeof(__le16)); + if (err) + return err; + *val = le16_to_cpu(zdval); + return 0; +} + +static inline int zd1201_setconfig16(struct zd1201 *zd, int rid, short val) +{ + __le16 zdval = cpu_to_le16(val); + return (zd1201_setconfig(zd, rid, &zdval, sizeof(__le16), 1)); +} + +static int zd1201_drvr_start(struct zd1201 *zd) +{ + int err, i; + short max; + __le16 zdmax; + unsigned char *buffer; + + buffer = kzalloc(ZD1201_RXSIZE, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + usb_fill_bulk_urb(zd->rx_urb, zd->usb, + usb_rcvbulkpipe(zd->usb, zd->endp_in), buffer, ZD1201_RXSIZE, + zd1201_usbrx, zd); + + err = usb_submit_urb(zd->rx_urb, GFP_KERNEL); + if (err) + goto err_buffer; + + err = zd1201_docmd(zd, ZD1201_CMDCODE_INIT, 0, 0, 0); + if (err) + goto err_urb; + + err = zd1201_getconfig(zd, ZD1201_RID_CNFMAXTXBUFFERNUMBER, &zdmax, + sizeof(__le16)); + if (err) + goto err_urb; + + max = le16_to_cpu(zdmax); + for (i=0; i<max; i++) { + err = zd1201_docmd(zd, ZD1201_CMDCODE_ALLOC, 1514, 0, 0); + if (err) + goto err_urb; + } + + return 0; + +err_urb: + usb_kill_urb(zd->rx_urb); + return err; +err_buffer: + kfree(buffer); + return err; +} + +/* Magic alert: The firmware doesn't seem to like the MAC state being + * toggled in promisc (aka monitor) mode. + * (It works a number of times, but will halt eventually) + * So we turn it of before disabling and on after enabling if needed. + */ +static int zd1201_enable(struct zd1201 *zd) +{ + int err; + + if (zd->mac_enabled) + return 0; + + err = zd1201_docmd(zd, ZD1201_CMDCODE_ENABLE, 0, 0, 0); + if (!err) + zd->mac_enabled = 1; + + if (zd->monitor) + err = zd1201_setconfig16(zd, ZD1201_RID_PROMISCUOUSMODE, 1); + + return err; +} + +static int zd1201_disable(struct zd1201 *zd) +{ + int err; + + if (!zd->mac_enabled) + return 0; + if (zd->monitor) { + err = zd1201_setconfig16(zd, ZD1201_RID_PROMISCUOUSMODE, 0); + if (err) + return err; + } + + err = zd1201_docmd(zd, ZD1201_CMDCODE_DISABLE, 0, 0, 0); + if (!err) + zd->mac_enabled = 0; + return err; +} + +static int zd1201_mac_reset(struct zd1201 *zd) +{ + if (!zd->mac_enabled) + return 0; + zd1201_disable(zd); + return zd1201_enable(zd); +} + +static int zd1201_join(struct zd1201 *zd, char *essid, int essidlen) +{ + int err, val; + char buf[IW_ESSID_MAX_SIZE+2]; + + err = zd1201_disable(zd); + if (err) + return err; + + val = ZD1201_CNFAUTHENTICATION_OPENSYSTEM; + val |= ZD1201_CNFAUTHENTICATION_SHAREDKEY; + err = zd1201_setconfig16(zd, ZD1201_RID_CNFAUTHENTICATION, val); + if (err) + return err; + + *(__le16 *)buf = cpu_to_le16(essidlen); + memcpy(buf+2, essid, essidlen); + if (!zd->ap) { /* Normal station */ + err = zd1201_setconfig(zd, ZD1201_RID_CNFDESIREDSSID, buf, + IW_ESSID_MAX_SIZE+2, 1); + if (err) + return err; + } else { /* AP */ + err = zd1201_setconfig(zd, ZD1201_RID_CNFOWNSSID, buf, + IW_ESSID_MAX_SIZE+2, 1); + if (err) + return err; + } + + err = zd1201_setconfig(zd, ZD1201_RID_CNFOWNMACADDR, + zd->dev->dev_addr, zd->dev->addr_len, 1); + if (err) + return err; + + err = zd1201_enable(zd); + if (err) + return err; + + msleep(100); + return 0; +} + +static int zd1201_net_open(struct net_device *dev) +{ + struct zd1201 *zd = netdev_priv(dev); + + /* Start MAC with wildcard if no essid set */ + if (!zd->mac_enabled) + zd1201_join(zd, zd->essid, zd->essidlen); + netif_start_queue(dev); + + return 0; +} + +static int zd1201_net_stop(struct net_device *dev) +{ + netif_stop_queue(dev); + return 0; +} + +/* + RFC 1042 encapsulates Ethernet frames in 802.11 frames + by prefixing them with 0xaa, 0xaa, 0x03) followed by a SNAP OID of 0 + (0x00, 0x00, 0x00). Zd requires an additional padding, copy + of ethernet addresses, length of the standard RFC 1042 packet + and a command byte (which is nul for tx). + + tx frame (from Wlan NG): + RFC 1042: + llc 0xAA 0xAA 0x03 (802.2 LLC) + snap 0x00 0x00 0x00 (Ethernet encapsulated) + type 2 bytes, Ethernet type field + payload (minus eth header) + Zydas specific: + padding 1B if (skb->len+8+1)%64==0 + Eth MAC addr 12 bytes, Ethernet MAC addresses + length 2 bytes, RFC 1042 packet length + (llc+snap+type+payload) + zd 1 null byte, zd1201 packet type + */ +static netdev_tx_t zd1201_hard_start_xmit(struct sk_buff *skb, + struct net_device *dev) +{ + struct zd1201 *zd = netdev_priv(dev); + unsigned char *txbuf = zd->txdata; + int txbuflen, pad = 0, err; + struct urb *urb = zd->tx_urb; + + if (!zd->mac_enabled || zd->monitor) { + dev->stats.tx_dropped++; + kfree_skb(skb); + return NETDEV_TX_OK; + } + netif_stop_queue(dev); + + txbuflen = skb->len + 8 + 1; + if (txbuflen%64 == 0) { + pad = 1; + txbuflen++; + } + txbuf[0] = 0xAA; + txbuf[1] = 0xAA; + txbuf[2] = 0x03; + txbuf[3] = 0x00; /* rfc1042 */ + txbuf[4] = 0x00; + txbuf[5] = 0x00; + + skb_copy_from_linear_data_offset(skb, 12, txbuf + 6, skb->len - 12); + if (pad) + txbuf[skb->len-12+6]=0; + skb_copy_from_linear_data(skb, txbuf + skb->len - 12 + 6 + pad, 12); + *(__be16*)&txbuf[skb->len+6+pad] = htons(skb->len-12+6); + txbuf[txbuflen-1] = 0; + + usb_fill_bulk_urb(urb, zd->usb, usb_sndbulkpipe(zd->usb, zd->endp_out), + txbuf, txbuflen, zd1201_usbtx, zd); + + err = usb_submit_urb(zd->tx_urb, GFP_ATOMIC); + if (err) { + dev->stats.tx_errors++; + netif_start_queue(dev); + } else { + dev->stats.tx_packets++; + dev->stats.tx_bytes += skb->len; + } + kfree_skb(skb); + + return NETDEV_TX_OK; +} + +static void zd1201_tx_timeout(struct net_device *dev, unsigned int txqueue) +{ + struct zd1201 *zd = netdev_priv(dev); + + if (!zd) + return; + dev_warn(&zd->usb->dev, "%s: TX timeout, shooting down urb\n", + dev->name); + usb_unlink_urb(zd->tx_urb); + dev->stats.tx_errors++; + /* Restart the timeout to quiet the watchdog: */ + netif_trans_update(dev); /* prevent tx timeout */ +} + +static int zd1201_set_mac_address(struct net_device *dev, void *p) +{ + struct sockaddr *addr = p; + struct zd1201 *zd = netdev_priv(dev); + int err; + + if (!zd) + return -ENODEV; + + err = zd1201_setconfig(zd, ZD1201_RID_CNFOWNMACADDR, + addr->sa_data, dev->addr_len, 1); + if (err) + return err; + memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); + + return zd1201_mac_reset(zd); +} + +static struct iw_statistics *zd1201_get_wireless_stats(struct net_device *dev) +{ + struct zd1201 *zd = netdev_priv(dev); + + return &zd->iwstats; +} + +static void zd1201_set_multicast(struct net_device *dev) +{ + struct zd1201 *zd = netdev_priv(dev); + struct netdev_hw_addr *ha; + unsigned char reqbuf[ETH_ALEN*ZD1201_MAXMULTI]; + int i; + + if (netdev_mc_count(dev) > ZD1201_MAXMULTI) + return; + + i = 0; + netdev_for_each_mc_addr(ha, dev) + memcpy(reqbuf + i++ * ETH_ALEN, ha->addr, ETH_ALEN); + zd1201_setconfig(zd, ZD1201_RID_CNFGROUPADDRESS, reqbuf, + netdev_mc_count(dev) * ETH_ALEN, 0); +} + +static int zd1201_config_commit(struct net_device *dev, + struct iw_request_info *info, struct iw_point *data, char *essid) +{ + struct zd1201 *zd = netdev_priv(dev); + + return zd1201_mac_reset(zd); +} + +static int zd1201_get_name(struct net_device *dev, + struct iw_request_info *info, char *name, char *extra) +{ + strcpy(name, "IEEE 802.11b"); + return 0; +} + +static int zd1201_set_freq(struct net_device *dev, + struct iw_request_info *info, struct iw_freq *freq, char *extra) +{ + struct zd1201 *zd = netdev_priv(dev); + short channel = 0; + int err; + + if (freq->e == 0) + channel = freq->m; + else + channel = ieee80211_frequency_to_channel(freq->m); + + err = zd1201_setconfig16(zd, ZD1201_RID_CNFOWNCHANNEL, channel); + if (err) + return err; + + zd1201_mac_reset(zd); + + return 0; +} + +static int zd1201_get_freq(struct net_device *dev, + struct iw_request_info *info, struct iw_freq *freq, char *extra) +{ + struct zd1201 *zd = netdev_priv(dev); + short channel; + int err; + + err = zd1201_getconfig16(zd, ZD1201_RID_CNFOWNCHANNEL, &channel); + if (err) + return err; + freq->e = 0; + freq->m = channel; + + return 0; +} + +static int zd1201_set_mode(struct net_device *dev, + struct iw_request_info *info, __u32 *mode, char *extra) +{ + struct zd1201 *zd = netdev_priv(dev); + short porttype, monitor = 0; + unsigned char buffer[IW_ESSID_MAX_SIZE+2]; + int err; + + if (zd->ap) { + if (*mode != IW_MODE_MASTER) + return -EINVAL; + return 0; + } + + err = zd1201_setconfig16(zd, ZD1201_RID_PROMISCUOUSMODE, 0); + if (err) + return err; + zd->dev->type = ARPHRD_ETHER; + switch(*mode) { + case IW_MODE_MONITOR: + monitor = 1; + zd->dev->type = ARPHRD_IEEE80211; + /* Make sure we are no longer associated with by + setting an 'impossible' essid. + (otherwise we mess up firmware) + */ + zd1201_join(zd, "\0-*#\0", 5); + /* Put port in pIBSS */ + /* Fall through */ + case 8: /* No pseudo-IBSS in wireless extensions (yet) */ + porttype = ZD1201_PORTTYPE_PSEUDOIBSS; + break; + case IW_MODE_ADHOC: + porttype = ZD1201_PORTTYPE_IBSS; + break; + case IW_MODE_INFRA: + porttype = ZD1201_PORTTYPE_BSS; + break; + default: + return -EINVAL; + } + + err = zd1201_setconfig16(zd, ZD1201_RID_CNFPORTTYPE, porttype); + if (err) + return err; + if (zd->monitor && !monitor) { + zd1201_disable(zd); + *(__le16 *)buffer = cpu_to_le16(zd->essidlen); + memcpy(buffer+2, zd->essid, zd->essidlen); + err = zd1201_setconfig(zd, ZD1201_RID_CNFDESIREDSSID, + buffer, IW_ESSID_MAX_SIZE+2, 1); + if (err) + return err; + } + zd->monitor = monitor; + /* If monitor mode is set we don't actually turn it on here since it + * is done during mac reset anyway (see zd1201_mac_enable). + */ + zd1201_mac_reset(zd); + + return 0; +} + +static int zd1201_get_mode(struct net_device *dev, + struct iw_request_info *info, __u32 *mode, char *extra) +{ + struct zd1201 *zd = netdev_priv(dev); + short porttype; + int err; + + err = zd1201_getconfig16(zd, ZD1201_RID_CNFPORTTYPE, &porttype); + if (err) + return err; + switch(porttype) { + case ZD1201_PORTTYPE_IBSS: + *mode = IW_MODE_ADHOC; + break; + case ZD1201_PORTTYPE_BSS: + *mode = IW_MODE_INFRA; + break; + case ZD1201_PORTTYPE_WDS: + *mode = IW_MODE_REPEAT; + break; + case ZD1201_PORTTYPE_PSEUDOIBSS: + *mode = 8;/* No Pseudo-IBSS... */ + break; + case ZD1201_PORTTYPE_AP: + *mode = IW_MODE_MASTER; + break; + default: + dev_dbg(&zd->usb->dev, "Unknown porttype: %d\n", + porttype); + *mode = IW_MODE_AUTO; + } + if (zd->monitor) + *mode = IW_MODE_MONITOR; + + return 0; +} + +static int zd1201_get_range(struct net_device *dev, + struct iw_request_info *info, struct iw_point *wrq, char *extra) +{ + struct iw_range *range = (struct iw_range *)extra; + + wrq->length = sizeof(struct iw_range); + memset(range, 0, sizeof(struct iw_range)); + range->we_version_compiled = WIRELESS_EXT; + range->we_version_source = WIRELESS_EXT; + + range->max_qual.qual = 128; + range->max_qual.level = 128; + range->max_qual.noise = 128; + range->max_qual.updated = 7; + + range->encoding_size[0] = 5; + range->encoding_size[1] = 13; + range->num_encoding_sizes = 2; + range->max_encoding_tokens = ZD1201_NUMKEYS; + + range->num_bitrates = 4; + range->bitrate[0] = 1000000; + range->bitrate[1] = 2000000; + range->bitrate[2] = 5500000; + range->bitrate[3] = 11000000; + + range->min_rts = 0; + range->min_frag = ZD1201_FRAGMIN; + range->max_rts = ZD1201_RTSMAX; + range->min_frag = ZD1201_FRAGMAX; + + return 0; +} + +/* Little bit of magic here: we only get the quality if we poll + * for it, and we never get an actual request to trigger such + * a poll. Therefore we 'assume' that the user will soon ask for + * the stats after asking the bssid. + */ +static int zd1201_get_wap(struct net_device *dev, + struct iw_request_info *info, struct sockaddr *ap_addr, char *extra) +{ + struct zd1201 *zd = netdev_priv(dev); + unsigned char buffer[6]; + + if (!zd1201_getconfig(zd, ZD1201_RID_COMMSQUALITY, buffer, 6)) { + /* Unfortunately the quality and noise reported is useless. + they seem to be accumulators that increase until you + read them, unless we poll on a fixed interval we can't + use them + */ + /*zd->iwstats.qual.qual = le16_to_cpu(((__le16 *)buffer)[0]);*/ + zd->iwstats.qual.level = le16_to_cpu(((__le16 *)buffer)[1]); + /*zd->iwstats.qual.noise = le16_to_cpu(((__le16 *)buffer)[2]);*/ + zd->iwstats.qual.updated = 2; + } + + return zd1201_getconfig(zd, ZD1201_RID_CURRENTBSSID, ap_addr->sa_data, 6); +} + +static int zd1201_set_scan(struct net_device *dev, + struct iw_request_info *info, struct iw_point *srq, char *extra) +{ + /* We do everything in get_scan */ + return 0; +} + +static int zd1201_get_scan(struct net_device *dev, + struct iw_request_info *info, struct iw_point *srq, char *extra) +{ + struct zd1201 *zd = netdev_priv(dev); + int err, i, j, enabled_save; + struct iw_event iwe; + char *cev = extra; + char *end_buf = extra + IW_SCAN_MAX_DATA; + + /* No scanning in AP mode */ + if (zd->ap) + return -EOPNOTSUPP; + + /* Scan doesn't seem to work if disabled */ + enabled_save = zd->mac_enabled; + zd1201_enable(zd); + + zd->rxdatas = 0; + err = zd1201_docmd(zd, ZD1201_CMDCODE_INQUIRE, + ZD1201_INQ_SCANRESULTS, 0, 0); + if (err) + return err; + + wait_event_interruptible(zd->rxdataq, zd->rxdatas); + if (!zd->rxlen) + return -EIO; + + if (le16_to_cpu(*(__le16*)&zd->rxdata[2]) != ZD1201_INQ_SCANRESULTS) + return -EIO; + + for(i=8; i<zd->rxlen; i+=62) { + iwe.cmd = SIOCGIWAP; + iwe.u.ap_addr.sa_family = ARPHRD_ETHER; + memcpy(iwe.u.ap_addr.sa_data, zd->rxdata+i+6, 6); + cev = iwe_stream_add_event(info, cev, end_buf, + &iwe, IW_EV_ADDR_LEN); + + iwe.cmd = SIOCGIWESSID; + iwe.u.data.length = zd->rxdata[i+16]; + iwe.u.data.flags = 1; + cev = iwe_stream_add_point(info, cev, end_buf, + &iwe, zd->rxdata+i+18); + + iwe.cmd = SIOCGIWMODE; + if (zd->rxdata[i+14]&0x01) + iwe.u.mode = IW_MODE_MASTER; + else + iwe.u.mode = IW_MODE_ADHOC; + cev = iwe_stream_add_event(info, cev, end_buf, + &iwe, IW_EV_UINT_LEN); + + iwe.cmd = SIOCGIWFREQ; + iwe.u.freq.m = zd->rxdata[i+0]; + iwe.u.freq.e = 0; + cev = iwe_stream_add_event(info, cev, end_buf, + &iwe, IW_EV_FREQ_LEN); + + iwe.cmd = SIOCGIWRATE; + iwe.u.bitrate.fixed = 0; + iwe.u.bitrate.disabled = 0; + for (j=0; j<10; j++) if (zd->rxdata[i+50+j]) { + iwe.u.bitrate.value = (zd->rxdata[i+50+j]&0x7f)*500000; + cev = iwe_stream_add_event(info, cev, end_buf, + &iwe, IW_EV_PARAM_LEN); + } + + iwe.cmd = SIOCGIWENCODE; + iwe.u.data.length = 0; + if (zd->rxdata[i+14]&0x10) + iwe.u.data.flags = IW_ENCODE_ENABLED; + else + iwe.u.data.flags = IW_ENCODE_DISABLED; + cev = iwe_stream_add_point(info, cev, end_buf, &iwe, NULL); + + iwe.cmd = IWEVQUAL; + iwe.u.qual.qual = zd->rxdata[i+4]; + iwe.u.qual.noise= zd->rxdata[i+2]/10-100; + iwe.u.qual.level = (256+zd->rxdata[i+4]*100)/255-100; + iwe.u.qual.updated = 7; + cev = iwe_stream_add_event(info, cev, end_buf, + &iwe, IW_EV_QUAL_LEN); + } + + if (!enabled_save) + zd1201_disable(zd); + + srq->length = cev - extra; + srq->flags = 0; + + return 0; +} + +static int zd1201_set_essid(struct net_device *dev, + struct iw_request_info *info, struct iw_point *data, char *essid) +{ + struct zd1201 *zd = netdev_priv(dev); + + if (data->length > IW_ESSID_MAX_SIZE) + return -EINVAL; + if (data->length < 1) + data->length = 1; + zd->essidlen = data->length; + memset(zd->essid, 0, IW_ESSID_MAX_SIZE+1); + memcpy(zd->essid, essid, data->length); + return zd1201_join(zd, zd->essid, zd->essidlen); +} + +static int zd1201_get_essid(struct net_device *dev, + struct iw_request_info *info, struct iw_point *data, char *essid) +{ + struct zd1201 *zd = netdev_priv(dev); + + memcpy(essid, zd->essid, zd->essidlen); + data->flags = 1; + data->length = zd->essidlen; + + return 0; +} + +static int zd1201_get_nick(struct net_device *dev, struct iw_request_info *info, + struct iw_point *data, char *nick) +{ + strcpy(nick, "zd1201"); + data->flags = 1; + data->length = strlen(nick); + return 0; +} + +static int zd1201_set_rate(struct net_device *dev, + struct iw_request_info *info, struct iw_param *rrq, char *extra) +{ + struct zd1201 *zd = netdev_priv(dev); + short rate; + int err; + + switch (rrq->value) { + case 1000000: + rate = ZD1201_RATEB1; + break; + case 2000000: + rate = ZD1201_RATEB2; + break; + case 5500000: + rate = ZD1201_RATEB5; + break; + case 11000000: + default: + rate = ZD1201_RATEB11; + break; + } + if (!rrq->fixed) { /* Also enable all lower bitrates */ + rate |= rate-1; + } + + err = zd1201_setconfig16(zd, ZD1201_RID_TXRATECNTL, rate); + if (err) + return err; + + return zd1201_mac_reset(zd); +} + +static int zd1201_get_rate(struct net_device *dev, + struct iw_request_info *info, struct iw_param *rrq, char *extra) +{ + struct zd1201 *zd = netdev_priv(dev); + short rate; + int err; + + err = zd1201_getconfig16(zd, ZD1201_RID_CURRENTTXRATE, &rate); + if (err) + return err; + + switch(rate) { + case 1: + rrq->value = 1000000; + break; + case 2: + rrq->value = 2000000; + break; + case 5: + rrq->value = 5500000; + break; + case 11: + rrq->value = 11000000; + break; + default: + rrq->value = 0; + } + rrq->fixed = 0; + rrq->disabled = 0; + + return 0; +} + +static int zd1201_set_rts(struct net_device *dev, struct iw_request_info *info, + struct iw_param *rts, char *extra) +{ + struct zd1201 *zd = netdev_priv(dev); + int err; + short val = rts->value; + + if (rts->disabled || !rts->fixed) + val = ZD1201_RTSMAX; + if (val > ZD1201_RTSMAX) + return -EINVAL; + if (val < 0) + return -EINVAL; + + err = zd1201_setconfig16(zd, ZD1201_RID_CNFRTSTHRESHOLD, val); + if (err) + return err; + return zd1201_mac_reset(zd); +} + +static int zd1201_get_rts(struct net_device *dev, struct iw_request_info *info, + struct iw_param *rts, char *extra) +{ + struct zd1201 *zd = netdev_priv(dev); + short rtst; + int err; + + err = zd1201_getconfig16(zd, ZD1201_RID_CNFRTSTHRESHOLD, &rtst); + if (err) + return err; + rts->value = rtst; + rts->disabled = (rts->value == ZD1201_RTSMAX); + rts->fixed = 1; + + return 0; +} + +static int zd1201_set_frag(struct net_device *dev, struct iw_request_info *info, + struct iw_param *frag, char *extra) +{ + struct zd1201 *zd = netdev_priv(dev); + int err; + short val = frag->value; + + if (frag->disabled || !frag->fixed) + val = ZD1201_FRAGMAX; + if (val > ZD1201_FRAGMAX) + return -EINVAL; + if (val < ZD1201_FRAGMIN) + return -EINVAL; + if (val & 1) + return -EINVAL; + err = zd1201_setconfig16(zd, ZD1201_RID_CNFFRAGTHRESHOLD, val); + if (err) + return err; + return zd1201_mac_reset(zd); +} + +static int zd1201_get_frag(struct net_device *dev, struct iw_request_info *info, + struct iw_param *frag, char *extra) +{ + struct zd1201 *zd = netdev_priv(dev); + short fragt; + int err; + + err = zd1201_getconfig16(zd, ZD1201_RID_CNFFRAGTHRESHOLD, &fragt); + if (err) + return err; + frag->value = fragt; + frag->disabled = (frag->value == ZD1201_FRAGMAX); + frag->fixed = 1; + + return 0; +} + +static int zd1201_set_retry(struct net_device *dev, + struct iw_request_info *info, struct iw_param *rrq, char *extra) +{ + return 0; +} + +static int zd1201_get_retry(struct net_device *dev, + struct iw_request_info *info, struct iw_param *rrq, char *extra) +{ + return 0; +} + +static int zd1201_set_encode(struct net_device *dev, + struct iw_request_info *info, struct iw_point *erq, char *key) +{ + struct zd1201 *zd = netdev_priv(dev); + short i; + int err, rid; + + if (erq->length > ZD1201_MAXKEYLEN) + return -EINVAL; + + i = (erq->flags & IW_ENCODE_INDEX)-1; + if (i == -1) { + err = zd1201_getconfig16(zd,ZD1201_RID_CNFDEFAULTKEYID,&i); + if (err) + return err; + } else { + err = zd1201_setconfig16(zd, ZD1201_RID_CNFDEFAULTKEYID, i); + if (err) + return err; + } + + if (i < 0 || i >= ZD1201_NUMKEYS) + return -EINVAL; + + rid = ZD1201_RID_CNFDEFAULTKEY0 + i; + err = zd1201_setconfig(zd, rid, key, erq->length, 1); + if (err) + return err; + zd->encode_keylen[i] = erq->length; + memcpy(zd->encode_keys[i], key, erq->length); + + i=0; + if (!(erq->flags & IW_ENCODE_DISABLED & IW_ENCODE_MODE)) { + i |= 0x01; + zd->encode_enabled = 1; + } else + zd->encode_enabled = 0; + if (erq->flags & IW_ENCODE_RESTRICTED & IW_ENCODE_MODE) { + i |= 0x02; + zd->encode_restricted = 1; + } else + zd->encode_restricted = 0; + err = zd1201_setconfig16(zd, ZD1201_RID_CNFWEBFLAGS, i); + if (err) + return err; + + if (zd->encode_enabled) + i = ZD1201_CNFAUTHENTICATION_SHAREDKEY; + else + i = ZD1201_CNFAUTHENTICATION_OPENSYSTEM; + err = zd1201_setconfig16(zd, ZD1201_RID_CNFAUTHENTICATION, i); + if (err) + return err; + + return zd1201_mac_reset(zd); +} + +static int zd1201_get_encode(struct net_device *dev, + struct iw_request_info *info, struct iw_point *erq, char *key) +{ + struct zd1201 *zd = netdev_priv(dev); + short i; + int err; + + if (zd->encode_enabled) + erq->flags = IW_ENCODE_ENABLED; + else + erq->flags = IW_ENCODE_DISABLED; + if (zd->encode_restricted) + erq->flags |= IW_ENCODE_RESTRICTED; + else + erq->flags |= IW_ENCODE_OPEN; + + i = (erq->flags & IW_ENCODE_INDEX) -1; + if (i == -1) { + err = zd1201_getconfig16(zd, ZD1201_RID_CNFDEFAULTKEYID, &i); + if (err) + return err; + } + if (i<0 || i>= ZD1201_NUMKEYS) + return -EINVAL; + + erq->flags |= i+1; + + erq->length = zd->encode_keylen[i]; + memcpy(key, zd->encode_keys[i], erq->length); + + return 0; +} + +static int zd1201_set_power(struct net_device *dev, + struct iw_request_info *info, struct iw_param *vwrq, char *extra) +{ + struct zd1201 *zd = netdev_priv(dev); + short enabled, duration, level; + int err; + + enabled = vwrq->disabled ? 0 : 1; + if (enabled) { + if (vwrq->flags & IW_POWER_PERIOD) { + duration = vwrq->value; + err = zd1201_setconfig16(zd, + ZD1201_RID_CNFMAXSLEEPDURATION, duration); + if (err) + return err; + goto out; + } + if (vwrq->flags & IW_POWER_TIMEOUT) { + err = zd1201_getconfig16(zd, + ZD1201_RID_CNFMAXSLEEPDURATION, &duration); + if (err) + return err; + level = vwrq->value * 4 / duration; + if (level > 4) + level = 4; + if (level < 0) + level = 0; + err = zd1201_setconfig16(zd, ZD1201_RID_CNFPMEPS, + level); + if (err) + return err; + goto out; + } + return -EINVAL; + } +out: + return zd1201_setconfig16(zd, ZD1201_RID_CNFPMENABLED, enabled); +} + +static int zd1201_get_power(struct net_device *dev, + struct iw_request_info *info, struct iw_param *vwrq, char *extra) +{ + struct zd1201 *zd = netdev_priv(dev); + short enabled, level, duration; + int err; + + err = zd1201_getconfig16(zd, ZD1201_RID_CNFPMENABLED, &enabled); + if (err) + return err; + err = zd1201_getconfig16(zd, ZD1201_RID_CNFPMEPS, &level); + if (err) + return err; + err = zd1201_getconfig16(zd, ZD1201_RID_CNFMAXSLEEPDURATION, &duration); + if (err) + return err; + vwrq->disabled = enabled ? 0 : 1; + if (vwrq->flags & IW_POWER_TYPE) { + if (vwrq->flags & IW_POWER_PERIOD) { + vwrq->value = duration; + vwrq->flags = IW_POWER_PERIOD; + } else { + vwrq->value = duration * level / 4; + vwrq->flags = IW_POWER_TIMEOUT; + } + } + if (vwrq->flags & IW_POWER_MODE) { + if (enabled && level) + vwrq->flags = IW_POWER_UNICAST_R; + else + vwrq->flags = IW_POWER_ALL_R; + } + + return 0; +} + + +static const iw_handler zd1201_iw_handler[] = +{ + (iw_handler) zd1201_config_commit, /* SIOCSIWCOMMIT */ + (iw_handler) zd1201_get_name, /* SIOCGIWNAME */ + (iw_handler) NULL, /* SIOCSIWNWID */ + (iw_handler) NULL, /* SIOCGIWNWID */ + (iw_handler) zd1201_set_freq, /* SIOCSIWFREQ */ + (iw_handler) zd1201_get_freq, /* SIOCGIWFREQ */ + (iw_handler) zd1201_set_mode, /* SIOCSIWMODE */ + (iw_handler) zd1201_get_mode, /* SIOCGIWMODE */ + (iw_handler) NULL, /* SIOCSIWSENS */ + (iw_handler) NULL, /* SIOCGIWSENS */ + (iw_handler) NULL, /* SIOCSIWRANGE */ + (iw_handler) zd1201_get_range, /* SIOCGIWRANGE */ + (iw_handler) NULL, /* SIOCSIWPRIV */ + (iw_handler) NULL, /* SIOCGIWPRIV */ + (iw_handler) NULL, /* SIOCSIWSTATS */ + (iw_handler) NULL, /* SIOCGIWSTATS */ + (iw_handler) NULL, /* SIOCSIWSPY */ + (iw_handler) NULL, /* SIOCGIWSPY */ + (iw_handler) NULL, /* -- hole -- */ + (iw_handler) NULL, /* -- hole -- */ + (iw_handler) NULL/*zd1201_set_wap*/, /* SIOCSIWAP */ + (iw_handler) zd1201_get_wap, /* SIOCGIWAP */ + (iw_handler) NULL, /* -- hole -- */ + (iw_handler) NULL, /* SIOCGIWAPLIST */ + (iw_handler) zd1201_set_scan, /* SIOCSIWSCAN */ + (iw_handler) zd1201_get_scan, /* SIOCGIWSCAN */ + (iw_handler) zd1201_set_essid, /* SIOCSIWESSID */ + (iw_handler) zd1201_get_essid, /* SIOCGIWESSID */ + (iw_handler) NULL, /* SIOCSIWNICKN */ + (iw_handler) zd1201_get_nick, /* SIOCGIWNICKN */ + (iw_handler) NULL, /* -- hole -- */ + (iw_handler) NULL, /* -- hole -- */ + (iw_handler) zd1201_set_rate, /* SIOCSIWRATE */ + (iw_handler) zd1201_get_rate, /* SIOCGIWRATE */ + (iw_handler) zd1201_set_rts, /* SIOCSIWRTS */ + (iw_handler) zd1201_get_rts, /* SIOCGIWRTS */ + (iw_handler) zd1201_set_frag, /* SIOCSIWFRAG */ + (iw_handler) zd1201_get_frag, /* SIOCGIWFRAG */ + (iw_handler) NULL, /* SIOCSIWTXPOW */ + (iw_handler) NULL, /* SIOCGIWTXPOW */ + (iw_handler) zd1201_set_retry, /* SIOCSIWRETRY */ + (iw_handler) zd1201_get_retry, /* SIOCGIWRETRY */ + (iw_handler) zd1201_set_encode, /* SIOCSIWENCODE */ + (iw_handler) zd1201_get_encode, /* SIOCGIWENCODE */ + (iw_handler) zd1201_set_power, /* SIOCSIWPOWER */ + (iw_handler) zd1201_get_power, /* SIOCGIWPOWER */ +}; + +static int zd1201_set_hostauth(struct net_device *dev, + struct iw_request_info *info, struct iw_param *rrq, char *extra) +{ + struct zd1201 *zd = netdev_priv(dev); + + if (!zd->ap) + return -EOPNOTSUPP; + + return zd1201_setconfig16(zd, ZD1201_RID_CNFHOSTAUTH, rrq->value); +} + +static int zd1201_get_hostauth(struct net_device *dev, + struct iw_request_info *info, struct iw_param *rrq, char *extra) +{ + struct zd1201 *zd = netdev_priv(dev); + short hostauth; + int err; + + if (!zd->ap) + return -EOPNOTSUPP; + + err = zd1201_getconfig16(zd, ZD1201_RID_CNFHOSTAUTH, &hostauth); + if (err) + return err; + rrq->value = hostauth; + rrq->fixed = 1; + + return 0; +} + +static int zd1201_auth_sta(struct net_device *dev, + struct iw_request_info *info, struct sockaddr *sta, char *extra) +{ + struct zd1201 *zd = netdev_priv(dev); + unsigned char buffer[10]; + + if (!zd->ap) + return -EOPNOTSUPP; + + memcpy(buffer, sta->sa_data, ETH_ALEN); + *(short*)(buffer+6) = 0; /* 0==success, 1==failure */ + *(short*)(buffer+8) = 0; + + return zd1201_setconfig(zd, ZD1201_RID_AUTHENTICATESTA, buffer, 10, 1); +} + +static int zd1201_set_maxassoc(struct net_device *dev, + struct iw_request_info *info, struct iw_param *rrq, char *extra) +{ + struct zd1201 *zd = netdev_priv(dev); + + if (!zd->ap) + return -EOPNOTSUPP; + + return zd1201_setconfig16(zd, ZD1201_RID_CNFMAXASSOCSTATIONS, rrq->value); +} + +static int zd1201_get_maxassoc(struct net_device *dev, + struct iw_request_info *info, struct iw_param *rrq, char *extra) +{ + struct zd1201 *zd = netdev_priv(dev); + short maxassoc; + int err; + + if (!zd->ap) + return -EOPNOTSUPP; + + err = zd1201_getconfig16(zd, ZD1201_RID_CNFMAXASSOCSTATIONS, &maxassoc); + if (err) + return err; + rrq->value = maxassoc; + rrq->fixed = 1; + + return 0; +} + +static const iw_handler zd1201_private_handler[] = { + (iw_handler) zd1201_set_hostauth, /* ZD1201SIWHOSTAUTH */ + (iw_handler) zd1201_get_hostauth, /* ZD1201GIWHOSTAUTH */ + (iw_handler) zd1201_auth_sta, /* ZD1201SIWAUTHSTA */ + (iw_handler) NULL, /* nothing to get */ + (iw_handler) zd1201_set_maxassoc, /* ZD1201SIMAXASSOC */ + (iw_handler) zd1201_get_maxassoc, /* ZD1201GIMAXASSOC */ +}; + +static const struct iw_priv_args zd1201_private_args[] = { + { ZD1201SIWHOSTAUTH, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + IW_PRIV_TYPE_NONE, "sethostauth" }, + { ZD1201GIWHOSTAUTH, IW_PRIV_TYPE_NONE, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gethostauth" }, + { ZD1201SIWAUTHSTA, IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, + IW_PRIV_TYPE_NONE, "authstation" }, + { ZD1201SIWMAXASSOC, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + IW_PRIV_TYPE_NONE, "setmaxassoc" }, + { ZD1201GIWMAXASSOC, IW_PRIV_TYPE_NONE, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getmaxassoc" }, +}; + +static const struct iw_handler_def zd1201_iw_handlers = { + .num_standard = ARRAY_SIZE(zd1201_iw_handler), + .num_private = ARRAY_SIZE(zd1201_private_handler), + .num_private_args = ARRAY_SIZE(zd1201_private_args), + .standard = (iw_handler *)zd1201_iw_handler, + .private = (iw_handler *)zd1201_private_handler, + .private_args = (struct iw_priv_args *) zd1201_private_args, + .get_wireless_stats = zd1201_get_wireless_stats, +}; + +static const struct net_device_ops zd1201_netdev_ops = { + .ndo_open = zd1201_net_open, + .ndo_stop = zd1201_net_stop, + .ndo_start_xmit = zd1201_hard_start_xmit, + .ndo_tx_timeout = zd1201_tx_timeout, + .ndo_set_rx_mode = zd1201_set_multicast, + .ndo_set_mac_address = zd1201_set_mac_address, + .ndo_validate_addr = eth_validate_addr, +}; + +static int zd1201_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct zd1201 *zd; + struct net_device *dev; + struct usb_device *usb; + int err; + short porttype; + char buf[IW_ESSID_MAX_SIZE+2]; + + usb = interface_to_usbdev(interface); + + dev = alloc_etherdev(sizeof(*zd)); + if (!dev) + return -ENOMEM; + zd = netdev_priv(dev); + zd->dev = dev; + + zd->ap = ap; + zd->usb = usb; + zd->removed = 0; + init_waitqueue_head(&zd->rxdataq); + INIT_HLIST_HEAD(&zd->fraglist); + + err = zd1201_fw_upload(usb, zd->ap); + if (err) { + dev_err(&usb->dev, "zd1201 firmware upload failed: %d\n", err); + goto err_zd; + } + + zd->endp_in = 1; + zd->endp_out = 1; + zd->endp_out2 = 2; + zd->rx_urb = usb_alloc_urb(0, GFP_KERNEL); + zd->tx_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!zd->rx_urb || !zd->tx_urb) { + err = -ENOMEM; + goto err_zd; + } + + mdelay(100); + err = zd1201_drvr_start(zd); + if (err) + goto err_zd; + + err = zd1201_setconfig16(zd, ZD1201_RID_CNFMAXDATALEN, 2312); + if (err) + goto err_start; + + err = zd1201_setconfig16(zd, ZD1201_RID_TXRATECNTL, + ZD1201_RATEB1 | ZD1201_RATEB2 | ZD1201_RATEB5 | ZD1201_RATEB11); + if (err) + goto err_start; + + dev->netdev_ops = &zd1201_netdev_ops; + dev->wireless_handlers = &zd1201_iw_handlers; + dev->watchdog_timeo = ZD1201_TX_TIMEOUT; + strcpy(dev->name, "wlan%d"); + + err = zd1201_getconfig(zd, ZD1201_RID_CNFOWNMACADDR, + dev->dev_addr, dev->addr_len); + if (err) + goto err_start; + + /* Set wildcard essid to match zd->essid */ + *(__le16 *)buf = cpu_to_le16(0); + err = zd1201_setconfig(zd, ZD1201_RID_CNFDESIREDSSID, buf, + IW_ESSID_MAX_SIZE+2, 1); + if (err) + goto err_start; + + if (zd->ap) + porttype = ZD1201_PORTTYPE_AP; + else + porttype = ZD1201_PORTTYPE_BSS; + err = zd1201_setconfig16(zd, ZD1201_RID_CNFPORTTYPE, porttype); + if (err) + goto err_start; + + SET_NETDEV_DEV(dev, &usb->dev); + + err = register_netdev(dev); + if (err) + goto err_start; + dev_info(&usb->dev, "%s: ZD1201 USB Wireless interface\n", + dev->name); + + usb_set_intfdata(interface, zd); + zd1201_enable(zd); /* zd1201 likes to startup enabled, */ + zd1201_disable(zd); /* interfering with all the wifis in range */ + return 0; + +err_start: + /* Leave the device in reset state */ + zd1201_docmd(zd, ZD1201_CMDCODE_INIT, 0, 0, 0); +err_zd: + usb_free_urb(zd->tx_urb); + usb_free_urb(zd->rx_urb); + free_netdev(dev); + return err; +} + +static void zd1201_disconnect(struct usb_interface *interface) +{ + struct zd1201 *zd = usb_get_intfdata(interface); + struct hlist_node *node2; + struct zd1201_frag *frag; + + if (!zd) + return; + usb_set_intfdata(interface, NULL); + + hlist_for_each_entry_safe(frag, node2, &zd->fraglist, fnode) { + hlist_del_init(&frag->fnode); + kfree_skb(frag->skb); + kfree(frag); + } + + if (zd->tx_urb) { + usb_kill_urb(zd->tx_urb); + usb_free_urb(zd->tx_urb); + } + if (zd->rx_urb) { + usb_kill_urb(zd->rx_urb); + usb_free_urb(zd->rx_urb); + } + + if (zd->dev) { + unregister_netdev(zd->dev); + free_netdev(zd->dev); + } +} + +#ifdef CONFIG_PM + +static int zd1201_suspend(struct usb_interface *interface, + pm_message_t message) +{ + struct zd1201 *zd = usb_get_intfdata(interface); + + netif_device_detach(zd->dev); + + zd->was_enabled = zd->mac_enabled; + + if (zd->was_enabled) + return zd1201_disable(zd); + else + return 0; +} + +static int zd1201_resume(struct usb_interface *interface) +{ + struct zd1201 *zd = usb_get_intfdata(interface); + + if (!zd || !zd->dev) + return -ENODEV; + + netif_device_attach(zd->dev); + + if (zd->was_enabled) + return zd1201_enable(zd); + else + return 0; +} + +#else + +#define zd1201_suspend NULL +#define zd1201_resume NULL + +#endif + +static struct usb_driver zd1201_usb = { + .name = "zd1201", + .probe = zd1201_probe, + .disconnect = zd1201_disconnect, + .id_table = zd1201_table, + .suspend = zd1201_suspend, + .resume = zd1201_resume, + .disable_hub_initiated_lpm = 1, +}; + +module_usb_driver(zd1201_usb); diff --git a/drivers/net/wireless/zydas/zd1201.h b/drivers/net/wireless/zydas/zd1201.h new file mode 100644 index 000000000..c46ac8755 --- /dev/null +++ b/drivers/net/wireless/zydas/zd1201.h @@ -0,0 +1,144 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2004, 2005 Jeroen Vreeken (pe1rxq@amsat.org) + * + * Parts of this driver have been derived from a wlan-ng version + * modified by ZyDAS. + * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. + */ + +#ifndef _INCLUDE_ZD1201_H_ +#define _INCLUDE_ZD1201_H_ + +#define ZD1201_NUMKEYS 4 +#define ZD1201_MAXKEYLEN 13 +#define ZD1201_MAXMULTI 16 +#define ZD1201_FRAGMAX 2500 +#define ZD1201_FRAGMIN 256 +#define ZD1201_RTSMAX 2500 + +#define ZD1201_RXSIZE 3000 + +struct zd1201 { + struct usb_device *usb; + int removed; + struct net_device *dev; + struct iw_statistics iwstats; + + int endp_in; + int endp_out; + int endp_out2; + struct urb *rx_urb; + struct urb *tx_urb; + + unsigned char rxdata[ZD1201_RXSIZE]; + int rxlen; + wait_queue_head_t rxdataq; + int rxdatas; + struct hlist_head fraglist; + unsigned char txdata[ZD1201_RXSIZE]; + + int ap; + char essid[IW_ESSID_MAX_SIZE+1]; + int essidlen; + int mac_enabled; + int was_enabled; + int monitor; + int encode_enabled; + int encode_restricted; + unsigned char encode_keys[ZD1201_NUMKEYS][ZD1201_MAXKEYLEN]; + int encode_keylen[ZD1201_NUMKEYS]; +}; + +struct zd1201_frag { + struct hlist_node fnode; + int seq; + struct sk_buff *skb; +}; + +#define ZD1201SIWHOSTAUTH SIOCIWFIRSTPRIV +#define ZD1201GIWHOSTAUTH ZD1201SIWHOSTAUTH+1 +#define ZD1201SIWAUTHSTA SIOCIWFIRSTPRIV+2 +#define ZD1201SIWMAXASSOC SIOCIWFIRSTPRIV+4 +#define ZD1201GIWMAXASSOC ZD1201SIWMAXASSOC+1 + +#define ZD1201_FW_TIMEOUT (1000) + +#define ZD1201_TX_TIMEOUT (2000) + +#define ZD1201_USB_CMDREQ 0 +#define ZD1201_USB_RESREQ 1 + +#define ZD1201_CMDCODE_INIT 0x00 +#define ZD1201_CMDCODE_ENABLE 0x01 +#define ZD1201_CMDCODE_DISABLE 0x02 +#define ZD1201_CMDCODE_ALLOC 0x0a +#define ZD1201_CMDCODE_INQUIRE 0x11 +#define ZD1201_CMDCODE_SETRXRID 0x17 +#define ZD1201_CMDCODE_ACCESS 0x21 + +#define ZD1201_PACKET_EVENTSTAT 0x0 +#define ZD1201_PACKET_RXDATA 0x1 +#define ZD1201_PACKET_INQUIRE 0x2 +#define ZD1201_PACKET_RESOURCE 0x3 + +#define ZD1201_ACCESSBIT 0x0100 + +#define ZD1201_RID_CNFPORTTYPE 0xfc00 +#define ZD1201_RID_CNFOWNMACADDR 0xfc01 +#define ZD1201_RID_CNFDESIREDSSID 0xfc02 +#define ZD1201_RID_CNFOWNCHANNEL 0xfc03 +#define ZD1201_RID_CNFOWNSSID 0xfc04 +#define ZD1201_RID_CNFMAXDATALEN 0xfc07 +#define ZD1201_RID_CNFPMENABLED 0xfc09 +#define ZD1201_RID_CNFPMEPS 0xfc0a +#define ZD1201_RID_CNFMAXSLEEPDURATION 0xfc0c +#define ZD1201_RID_CNFDEFAULTKEYID 0xfc23 +#define ZD1201_RID_CNFDEFAULTKEY0 0xfc24 +#define ZD1201_RID_CNFDEFAULTKEY1 0xfc25 +#define ZD1201_RID_CNFDEFAULTKEY2 0xfc26 +#define ZD1201_RID_CNFDEFAULTKEY3 0xfc27 +#define ZD1201_RID_CNFWEBFLAGS 0xfc28 +#define ZD1201_RID_CNFAUTHENTICATION 0xfc2a +#define ZD1201_RID_CNFMAXASSOCSTATIONS 0xfc2b +#define ZD1201_RID_CNFHOSTAUTH 0xfc2e +#define ZD1201_RID_CNFGROUPADDRESS 0xfc80 +#define ZD1201_RID_CNFFRAGTHRESHOLD 0xfc82 +#define ZD1201_RID_CNFRTSTHRESHOLD 0xfc83 +#define ZD1201_RID_TXRATECNTL 0xfc84 +#define ZD1201_RID_PROMISCUOUSMODE 0xfc85 +#define ZD1201_RID_CNFBASICRATES 0xfcb3 +#define ZD1201_RID_AUTHENTICATESTA 0xfce3 +#define ZD1201_RID_CURRENTBSSID 0xfd42 +#define ZD1201_RID_COMMSQUALITY 0xfd43 +#define ZD1201_RID_CURRENTTXRATE 0xfd44 +#define ZD1201_RID_CNFMAXTXBUFFERNUMBER 0xfda0 +#define ZD1201_RID_CURRENTCHANNEL 0xfdc1 + +#define ZD1201_INQ_SCANRESULTS 0xf101 + +#define ZD1201_INF_LINKSTATUS 0xf200 +#define ZD1201_INF_ASSOCSTATUS 0xf201 +#define ZD1201_INF_AUTHREQ 0xf202 + +#define ZD1201_ASSOCSTATUS_STAASSOC 0x1 +#define ZD1201_ASSOCSTATUS_REASSOC 0x2 +#define ZD1201_ASSOCSTATUS_DISASSOC 0x3 +#define ZD1201_ASSOCSTATUS_ASSOCFAIL 0x4 +#define ZD1201_ASSOCSTATUS_AUTHFAIL 0x5 + +#define ZD1201_PORTTYPE_IBSS 0 +#define ZD1201_PORTTYPE_BSS 1 +#define ZD1201_PORTTYPE_WDS 2 +#define ZD1201_PORTTYPE_PSEUDOIBSS 3 +#define ZD1201_PORTTYPE_AP 6 + +#define ZD1201_RATEB1 1 +#define ZD1201_RATEB2 2 +#define ZD1201_RATEB5 4 /* 5.5 really, but 5 is shorter :) */ +#define ZD1201_RATEB11 8 + +#define ZD1201_CNFAUTHENTICATION_OPENSYSTEM 0x0001 +#define ZD1201_CNFAUTHENTICATION_SHAREDKEY 0x0002 + +#endif /* _INCLUDE_ZD1201_H_ */ diff --git a/drivers/net/wireless/zydas/zd1211rw/Kconfig b/drivers/net/wireless/zydas/zd1211rw/Kconfig new file mode 100644 index 000000000..f9da8c068 --- /dev/null +++ b/drivers/net/wireless/zydas/zd1211rw/Kconfig @@ -0,0 +1,20 @@ +# SPDX-License-Identifier: GPL-2.0-only +config ZD1211RW + tristate "ZyDAS ZD1211/ZD1211B USB-wireless support" + depends on USB && MAC80211 + select FW_LOADER + help + This is a driver for the ZyDAS ZD1211/ZD1211B wireless + chip, present in many USB-wireless adapters. + + Device firmware is required alongside this driver. You can download + the firmware distribution from http://sf.net/projects/zd1211/files/ + +config ZD1211RW_DEBUG + bool "ZyDAS ZD1211 debugging" + depends on ZD1211RW + help + ZD1211 debugging messages. Choosing Y will result in additional debug + messages being saved to your kernel logs, which may help debug any + problems. + diff --git a/drivers/net/wireless/zydas/zd1211rw/Makefile b/drivers/net/wireless/zydas/zd1211rw/Makefile new file mode 100644 index 000000000..1647a449c --- /dev/null +++ b/drivers/net/wireless/zydas/zd1211rw/Makefile @@ -0,0 +1,10 @@ +# SPDX-License-Identifier: GPL-2.0 +obj-$(CONFIG_ZD1211RW) += zd1211rw.o + +zd1211rw-objs := zd_chip.o zd_mac.o \ + zd_rf_al2230.o zd_rf_rf2959.o \ + zd_rf_al7230b.o zd_rf_uw2453.o \ + zd_rf.o zd_usb.o + +ccflags-$(CONFIG_ZD1211RW_DEBUG) := -DDEBUG + diff --git a/drivers/net/wireless/zydas/zd1211rw/zd_chip.c b/drivers/net/wireless/zydas/zd1211rw/zd_chip.c new file mode 100644 index 000000000..3bb51dc8d --- /dev/null +++ b/drivers/net/wireless/zydas/zd1211rw/zd_chip.c @@ -0,0 +1,1547 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* ZD1211 USB-WLAN driver for Linux + * + * Copyright (C) 2005-2007 Ulrich Kunitz <kune@deine-taler.de> + * Copyright (C) 2006-2007 Daniel Drake <dsd@gentoo.org> + */ + +/* This file implements all the hardware specific functions for the ZD1211 + * and ZD1211B chips. Support for the ZD1211B was possible after Timothy + * Legge sent me a ZD1211B device. Thank you Tim. -- Uli + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> + +#include "zd_def.h" +#include "zd_chip.h" +#include "zd_mac.h" +#include "zd_rf.h" + +void zd_chip_init(struct zd_chip *chip, + struct ieee80211_hw *hw, + struct usb_interface *intf) +{ + memset(chip, 0, sizeof(*chip)); + mutex_init(&chip->mutex); + zd_usb_init(&chip->usb, hw, intf); + zd_rf_init(&chip->rf); +} + +void zd_chip_clear(struct zd_chip *chip) +{ + ZD_ASSERT(!mutex_is_locked(&chip->mutex)); + zd_usb_clear(&chip->usb); + zd_rf_clear(&chip->rf); + mutex_destroy(&chip->mutex); + ZD_MEMCLEAR(chip, sizeof(*chip)); +} + +static int scnprint_mac_oui(struct zd_chip *chip, char *buffer, size_t size) +{ + u8 *addr = zd_mac_get_perm_addr(zd_chip_to_mac(chip)); + return scnprintf(buffer, size, "%3phD", addr); +} + +/* Prints an identifier line, which will support debugging. */ +static int scnprint_id(struct zd_chip *chip, char *buffer, size_t size) +{ + int i = 0; + + i = scnprintf(buffer, size, "zd1211%s chip ", + zd_chip_is_zd1211b(chip) ? "b" : ""); + i += zd_usb_scnprint_id(&chip->usb, buffer+i, size-i); + i += scnprintf(buffer+i, size-i, " "); + i += scnprint_mac_oui(chip, buffer+i, size-i); + i += scnprintf(buffer+i, size-i, " "); + i += zd_rf_scnprint_id(&chip->rf, buffer+i, size-i); + i += scnprintf(buffer+i, size-i, " pa%1x %c%c%c%c%c", chip->pa_type, + chip->patch_cck_gain ? 'g' : '-', + chip->patch_cr157 ? '7' : '-', + chip->patch_6m_band_edge ? '6' : '-', + chip->new_phy_layout ? 'N' : '-', + chip->al2230s_bit ? 'S' : '-'); + return i; +} + +static void print_id(struct zd_chip *chip) +{ + char buffer[80]; + + scnprint_id(chip, buffer, sizeof(buffer)); + buffer[sizeof(buffer)-1] = 0; + dev_info(zd_chip_dev(chip), "%s\n", buffer); +} + +static zd_addr_t inc_addr(zd_addr_t addr) +{ + u16 a = (u16)addr; + /* Control registers use byte addressing, but everything else uses word + * addressing. */ + if ((a & 0xf000) == CR_START) + a += 2; + else + a += 1; + return (zd_addr_t)a; +} + +/* Read a variable number of 32-bit values. Parameter count is not allowed to + * exceed USB_MAX_IOREAD32_COUNT. + */ +int zd_ioread32v_locked(struct zd_chip *chip, u32 *values, const zd_addr_t *addr, + unsigned int count) +{ + int r; + int i; + zd_addr_t a16[USB_MAX_IOREAD32_COUNT * 2]; + u16 v16[USB_MAX_IOREAD32_COUNT * 2]; + unsigned int count16; + + if (count > USB_MAX_IOREAD32_COUNT) + return -EINVAL; + + /* Use stack for values and addresses. */ + count16 = 2 * count; + BUG_ON(count16 * sizeof(zd_addr_t) > sizeof(a16)); + BUG_ON(count16 * sizeof(u16) > sizeof(v16)); + + for (i = 0; i < count; i++) { + int j = 2*i; + /* We read the high word always first. */ + a16[j] = inc_addr(addr[i]); + a16[j+1] = addr[i]; + } + + r = zd_ioread16v_locked(chip, v16, a16, count16); + if (r) { + dev_dbg_f(zd_chip_dev(chip), + "error: %s. Error number %d\n", __func__, r); + return r; + } + + for (i = 0; i < count; i++) { + int j = 2*i; + values[i] = (v16[j] << 16) | v16[j+1]; + } + + return 0; +} + +static int _zd_iowrite32v_async_locked(struct zd_chip *chip, + const struct zd_ioreq32 *ioreqs, + unsigned int count) +{ + int i, j, r; + struct zd_ioreq16 ioreqs16[USB_MAX_IOWRITE32_COUNT * 2]; + unsigned int count16; + + /* Use stack for values and addresses. */ + + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + + if (count == 0) + return 0; + if (count > USB_MAX_IOWRITE32_COUNT) + return -EINVAL; + + count16 = 2 * count; + BUG_ON(count16 * sizeof(struct zd_ioreq16) > sizeof(ioreqs16)); + + for (i = 0; i < count; i++) { + j = 2*i; + /* We write the high word always first. */ + ioreqs16[j].value = ioreqs[i].value >> 16; + ioreqs16[j].addr = inc_addr(ioreqs[i].addr); + ioreqs16[j+1].value = ioreqs[i].value; + ioreqs16[j+1].addr = ioreqs[i].addr; + } + + r = zd_usb_iowrite16v_async(&chip->usb, ioreqs16, count16); +#ifdef DEBUG + if (r) { + dev_dbg_f(zd_chip_dev(chip), + "error %d in zd_usb_write16v\n", r); + } +#endif /* DEBUG */ + return r; +} + +int _zd_iowrite32v_locked(struct zd_chip *chip, const struct zd_ioreq32 *ioreqs, + unsigned int count) +{ + int r; + + zd_usb_iowrite16v_async_start(&chip->usb); + r = _zd_iowrite32v_async_locked(chip, ioreqs, count); + if (r) { + zd_usb_iowrite16v_async_end(&chip->usb, 0); + return r; + } + return zd_usb_iowrite16v_async_end(&chip->usb, 50 /* ms */); +} + +int zd_iowrite16a_locked(struct zd_chip *chip, + const struct zd_ioreq16 *ioreqs, unsigned int count) +{ + int r; + unsigned int i, j, t, max; + + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + zd_usb_iowrite16v_async_start(&chip->usb); + + for (i = 0; i < count; i += j + t) { + t = 0; + max = count-i; + if (max > USB_MAX_IOWRITE16_COUNT) + max = USB_MAX_IOWRITE16_COUNT; + for (j = 0; j < max; j++) { + if (!ioreqs[i+j].addr) { + t = 1; + break; + } + } + + r = zd_usb_iowrite16v_async(&chip->usb, &ioreqs[i], j); + if (r) { + zd_usb_iowrite16v_async_end(&chip->usb, 0); + dev_dbg_f(zd_chip_dev(chip), + "error zd_usb_iowrite16v. Error number %d\n", + r); + return r; + } + } + + return zd_usb_iowrite16v_async_end(&chip->usb, 50 /* ms */); +} + +/* Writes a variable number of 32 bit registers. The functions will split + * that in several USB requests. A split can be forced by inserting an IO + * request with an zero address field. + */ +int zd_iowrite32a_locked(struct zd_chip *chip, + const struct zd_ioreq32 *ioreqs, unsigned int count) +{ + int r; + unsigned int i, j, t, max; + + zd_usb_iowrite16v_async_start(&chip->usb); + + for (i = 0; i < count; i += j + t) { + t = 0; + max = count-i; + if (max > USB_MAX_IOWRITE32_COUNT) + max = USB_MAX_IOWRITE32_COUNT; + for (j = 0; j < max; j++) { + if (!ioreqs[i+j].addr) { + t = 1; + break; + } + } + + r = _zd_iowrite32v_async_locked(chip, &ioreqs[i], j); + if (r) { + zd_usb_iowrite16v_async_end(&chip->usb, 0); + dev_dbg_f(zd_chip_dev(chip), + "error _%s. Error number %d\n", __func__, + r); + return r; + } + } + + return zd_usb_iowrite16v_async_end(&chip->usb, 50 /* ms */); +} + +int zd_ioread16(struct zd_chip *chip, zd_addr_t addr, u16 *value) +{ + int r; + + mutex_lock(&chip->mutex); + r = zd_ioread16_locked(chip, value, addr); + mutex_unlock(&chip->mutex); + return r; +} + +int zd_ioread32(struct zd_chip *chip, zd_addr_t addr, u32 *value) +{ + int r; + + mutex_lock(&chip->mutex); + r = zd_ioread32_locked(chip, value, addr); + mutex_unlock(&chip->mutex); + return r; +} + +int zd_iowrite16(struct zd_chip *chip, zd_addr_t addr, u16 value) +{ + int r; + + mutex_lock(&chip->mutex); + r = zd_iowrite16_locked(chip, value, addr); + mutex_unlock(&chip->mutex); + return r; +} + +int zd_iowrite32(struct zd_chip *chip, zd_addr_t addr, u32 value) +{ + int r; + + mutex_lock(&chip->mutex); + r = zd_iowrite32_locked(chip, value, addr); + mutex_unlock(&chip->mutex); + return r; +} + +int zd_ioread32v(struct zd_chip *chip, const zd_addr_t *addresses, + u32 *values, unsigned int count) +{ + int r; + + mutex_lock(&chip->mutex); + r = zd_ioread32v_locked(chip, values, addresses, count); + mutex_unlock(&chip->mutex); + return r; +} + +int zd_iowrite32a(struct zd_chip *chip, const struct zd_ioreq32 *ioreqs, + unsigned int count) +{ + int r; + + mutex_lock(&chip->mutex); + r = zd_iowrite32a_locked(chip, ioreqs, count); + mutex_unlock(&chip->mutex); + return r; +} + +static int read_pod(struct zd_chip *chip, u8 *rf_type) +{ + int r; + u32 value; + + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + r = zd_ioread32_locked(chip, &value, E2P_POD); + if (r) + goto error; + dev_dbg_f(zd_chip_dev(chip), "E2P_POD %#010x\n", value); + + /* FIXME: AL2230 handling (Bit 7 in POD) */ + *rf_type = value & 0x0f; + chip->pa_type = (value >> 16) & 0x0f; + chip->patch_cck_gain = (value >> 8) & 0x1; + chip->patch_cr157 = (value >> 13) & 0x1; + chip->patch_6m_band_edge = (value >> 21) & 0x1; + chip->new_phy_layout = (value >> 31) & 0x1; + chip->al2230s_bit = (value >> 7) & 0x1; + chip->link_led = ((value >> 4) & 1) ? LED1 : LED2; + chip->supports_tx_led = 1; + if (value & (1 << 24)) { /* LED scenario */ + if (value & (1 << 29)) + chip->supports_tx_led = 0; + } + + dev_dbg_f(zd_chip_dev(chip), + "RF %s %#01x PA type %#01x patch CCK %d patch CR157 %d " + "patch 6M %d new PHY %d link LED%d tx led %d\n", + zd_rf_name(*rf_type), *rf_type, + chip->pa_type, chip->patch_cck_gain, + chip->patch_cr157, chip->patch_6m_band_edge, + chip->new_phy_layout, + chip->link_led == LED1 ? 1 : 2, + chip->supports_tx_led); + return 0; +error: + *rf_type = 0; + chip->pa_type = 0; + chip->patch_cck_gain = 0; + chip->patch_cr157 = 0; + chip->patch_6m_band_edge = 0; + chip->new_phy_layout = 0; + return r; +} + +static int zd_write_mac_addr_common(struct zd_chip *chip, const u8 *mac_addr, + const struct zd_ioreq32 *in_reqs, + const char *type) +{ + int r; + struct zd_ioreq32 reqs[2] = {in_reqs[0], in_reqs[1]}; + + if (mac_addr) { + reqs[0].value = (mac_addr[3] << 24) + | (mac_addr[2] << 16) + | (mac_addr[1] << 8) + | mac_addr[0]; + reqs[1].value = (mac_addr[5] << 8) + | mac_addr[4]; + dev_dbg_f(zd_chip_dev(chip), "%s addr %pM\n", type, mac_addr); + } else { + dev_dbg_f(zd_chip_dev(chip), "set NULL %s\n", type); + } + + mutex_lock(&chip->mutex); + r = zd_iowrite32a_locked(chip, reqs, ARRAY_SIZE(reqs)); + mutex_unlock(&chip->mutex); + return r; +} + +/* MAC address: if custom mac addresses are to be used CR_MAC_ADDR_P1 and + * CR_MAC_ADDR_P2 must be overwritten + */ +int zd_write_mac_addr(struct zd_chip *chip, const u8 *mac_addr) +{ + static const struct zd_ioreq32 reqs[2] = { + [0] = { .addr = CR_MAC_ADDR_P1 }, + [1] = { .addr = CR_MAC_ADDR_P2 }, + }; + + return zd_write_mac_addr_common(chip, mac_addr, reqs, "mac"); +} + +int zd_write_bssid(struct zd_chip *chip, const u8 *bssid) +{ + static const struct zd_ioreq32 reqs[2] = { + [0] = { .addr = CR_BSSID_P1 }, + [1] = { .addr = CR_BSSID_P2 }, + }; + + return zd_write_mac_addr_common(chip, bssid, reqs, "bssid"); +} + +int zd_read_regdomain(struct zd_chip *chip, u8 *regdomain) +{ + int r; + u32 value; + + mutex_lock(&chip->mutex); + r = zd_ioread32_locked(chip, &value, E2P_SUBID); + mutex_unlock(&chip->mutex); + if (r) + return r; + + *regdomain = value >> 16; + dev_dbg_f(zd_chip_dev(chip), "regdomain: %#04x\n", *regdomain); + + return 0; +} + +static int read_values(struct zd_chip *chip, u8 *values, size_t count, + zd_addr_t e2p_addr, u32 guard) +{ + int r; + int i; + u32 v; + + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + for (i = 0;;) { + r = zd_ioread32_locked(chip, &v, + (zd_addr_t)((u16)e2p_addr+i/2)); + if (r) + return r; + v -= guard; + if (i+4 < count) { + values[i++] = v; + values[i++] = v >> 8; + values[i++] = v >> 16; + values[i++] = v >> 24; + continue; + } + for (;i < count; i++) + values[i] = v >> (8*(i%3)); + return 0; + } +} + +static int read_pwr_cal_values(struct zd_chip *chip) +{ + return read_values(chip, chip->pwr_cal_values, + E2P_CHANNEL_COUNT, E2P_PWR_CAL_VALUE1, + 0); +} + +static int read_pwr_int_values(struct zd_chip *chip) +{ + return read_values(chip, chip->pwr_int_values, + E2P_CHANNEL_COUNT, E2P_PWR_INT_VALUE1, + E2P_PWR_INT_GUARD); +} + +static int read_ofdm_cal_values(struct zd_chip *chip) +{ + int r; + int i; + static const zd_addr_t addresses[] = { + E2P_36M_CAL_VALUE1, + E2P_48M_CAL_VALUE1, + E2P_54M_CAL_VALUE1, + }; + + for (i = 0; i < 3; i++) { + r = read_values(chip, chip->ofdm_cal_values[i], + E2P_CHANNEL_COUNT, addresses[i], 0); + if (r) + return r; + } + return 0; +} + +static int read_cal_int_tables(struct zd_chip *chip) +{ + int r; + + r = read_pwr_cal_values(chip); + if (r) + return r; + r = read_pwr_int_values(chip); + if (r) + return r; + r = read_ofdm_cal_values(chip); + if (r) + return r; + return 0; +} + +/* phy means physical registers */ +int zd_chip_lock_phy_regs(struct zd_chip *chip) +{ + int r; + u32 tmp; + + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + r = zd_ioread32_locked(chip, &tmp, CR_REG1); + if (r) { + dev_err(zd_chip_dev(chip), "error ioread32(CR_REG1): %d\n", r); + return r; + } + + tmp &= ~UNLOCK_PHY_REGS; + + r = zd_iowrite32_locked(chip, tmp, CR_REG1); + if (r) + dev_err(zd_chip_dev(chip), "error iowrite32(CR_REG1): %d\n", r); + return r; +} + +int zd_chip_unlock_phy_regs(struct zd_chip *chip) +{ + int r; + u32 tmp; + + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + r = zd_ioread32_locked(chip, &tmp, CR_REG1); + if (r) { + dev_err(zd_chip_dev(chip), + "error ioread32(CR_REG1): %d\n", r); + return r; + } + + tmp |= UNLOCK_PHY_REGS; + + r = zd_iowrite32_locked(chip, tmp, CR_REG1); + if (r) + dev_err(zd_chip_dev(chip), "error iowrite32(CR_REG1): %d\n", r); + return r; +} + +/* ZD_CR157 can be optionally patched by the EEPROM for original ZD1211 */ +static int patch_cr157(struct zd_chip *chip) +{ + int r; + u16 value; + + if (!chip->patch_cr157) + return 0; + + r = zd_ioread16_locked(chip, &value, E2P_PHY_REG); + if (r) + return r; + + dev_dbg_f(zd_chip_dev(chip), "patching value %x\n", value >> 8); + return zd_iowrite32_locked(chip, value >> 8, ZD_CR157); +} + +/* + * 6M band edge can be optionally overwritten for certain RF's + * Vendor driver says: for FCC regulation, enabled per HWFeature 6M band edge + * bit (for AL2230, AL2230S) + */ +static int patch_6m_band_edge(struct zd_chip *chip, u8 channel) +{ + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + if (!chip->patch_6m_band_edge) + return 0; + + return zd_rf_patch_6m_band_edge(&chip->rf, channel); +} + +/* Generic implementation of 6M band edge patching, used by most RFs via + * zd_rf_generic_patch_6m() */ +int zd_chip_generic_patch_6m_band(struct zd_chip *chip, int channel) +{ + struct zd_ioreq16 ioreqs[] = { + { ZD_CR128, 0x14 }, { ZD_CR129, 0x12 }, { ZD_CR130, 0x10 }, + { ZD_CR47, 0x1e }, + }; + + /* FIXME: Channel 11 is not the edge for all regulatory domains. */ + if (channel == 1 || channel == 11) + ioreqs[0].value = 0x12; + + dev_dbg_f(zd_chip_dev(chip), "patching for channel %d\n", channel); + return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); +} + +static int zd1211_hw_reset_phy(struct zd_chip *chip) +{ + static const struct zd_ioreq16 ioreqs[] = { + { ZD_CR0, 0x0a }, { ZD_CR1, 0x06 }, { ZD_CR2, 0x26 }, + { ZD_CR3, 0x38 }, { ZD_CR4, 0x80 }, { ZD_CR9, 0xa0 }, + { ZD_CR10, 0x81 }, { ZD_CR11, 0x00 }, { ZD_CR12, 0x7f }, + { ZD_CR13, 0x8c }, { ZD_CR14, 0x80 }, { ZD_CR15, 0x3d }, + { ZD_CR16, 0x20 }, { ZD_CR17, 0x1e }, { ZD_CR18, 0x0a }, + { ZD_CR19, 0x48 }, { ZD_CR20, 0x0c }, { ZD_CR21, 0x0c }, + { ZD_CR22, 0x23 }, { ZD_CR23, 0x90 }, { ZD_CR24, 0x14 }, + { ZD_CR25, 0x40 }, { ZD_CR26, 0x10 }, { ZD_CR27, 0x19 }, + { ZD_CR28, 0x7f }, { ZD_CR29, 0x80 }, { ZD_CR30, 0x4b }, + { ZD_CR31, 0x60 }, { ZD_CR32, 0x43 }, { ZD_CR33, 0x08 }, + { ZD_CR34, 0x06 }, { ZD_CR35, 0x0a }, { ZD_CR36, 0x00 }, + { ZD_CR37, 0x00 }, { ZD_CR38, 0x38 }, { ZD_CR39, 0x0c }, + { ZD_CR40, 0x84 }, { ZD_CR41, 0x2a }, { ZD_CR42, 0x80 }, + { ZD_CR43, 0x10 }, { ZD_CR44, 0x12 }, { ZD_CR46, 0xff }, + { ZD_CR47, 0x1E }, { ZD_CR48, 0x26 }, { ZD_CR49, 0x5b }, + { ZD_CR64, 0xd0 }, { ZD_CR65, 0x04 }, { ZD_CR66, 0x58 }, + { ZD_CR67, 0xc9 }, { ZD_CR68, 0x88 }, { ZD_CR69, 0x41 }, + { ZD_CR70, 0x23 }, { ZD_CR71, 0x10 }, { ZD_CR72, 0xff }, + { ZD_CR73, 0x32 }, { ZD_CR74, 0x30 }, { ZD_CR75, 0x65 }, + { ZD_CR76, 0x41 }, { ZD_CR77, 0x1b }, { ZD_CR78, 0x30 }, + { ZD_CR79, 0x68 }, { ZD_CR80, 0x64 }, { ZD_CR81, 0x64 }, + { ZD_CR82, 0x00 }, { ZD_CR83, 0x00 }, { ZD_CR84, 0x00 }, + { ZD_CR85, 0x02 }, { ZD_CR86, 0x00 }, { ZD_CR87, 0x00 }, + { ZD_CR88, 0xff }, { ZD_CR89, 0xfc }, { ZD_CR90, 0x00 }, + { ZD_CR91, 0x00 }, { ZD_CR92, 0x00 }, { ZD_CR93, 0x08 }, + { ZD_CR94, 0x00 }, { ZD_CR95, 0x00 }, { ZD_CR96, 0xff }, + { ZD_CR97, 0xe7 }, { ZD_CR98, 0x00 }, { ZD_CR99, 0x00 }, + { ZD_CR100, 0x00 }, { ZD_CR101, 0xae }, { ZD_CR102, 0x02 }, + { ZD_CR103, 0x00 }, { ZD_CR104, 0x03 }, { ZD_CR105, 0x65 }, + { ZD_CR106, 0x04 }, { ZD_CR107, 0x00 }, { ZD_CR108, 0x0a }, + { ZD_CR109, 0xaa }, { ZD_CR110, 0xaa }, { ZD_CR111, 0x25 }, + { ZD_CR112, 0x25 }, { ZD_CR113, 0x00 }, { ZD_CR119, 0x1e }, + { ZD_CR125, 0x90 }, { ZD_CR126, 0x00 }, { ZD_CR127, 0x00 }, + { }, + { ZD_CR5, 0x00 }, { ZD_CR6, 0x00 }, { ZD_CR7, 0x00 }, + { ZD_CR8, 0x00 }, { ZD_CR9, 0x20 }, { ZD_CR12, 0xf0 }, + { ZD_CR20, 0x0e }, { ZD_CR21, 0x0e }, { ZD_CR27, 0x10 }, + { ZD_CR44, 0x33 }, { ZD_CR47, 0x1E }, { ZD_CR83, 0x24 }, + { ZD_CR84, 0x04 }, { ZD_CR85, 0x00 }, { ZD_CR86, 0x0C }, + { ZD_CR87, 0x12 }, { ZD_CR88, 0x0C }, { ZD_CR89, 0x00 }, + { ZD_CR90, 0x10 }, { ZD_CR91, 0x08 }, { ZD_CR93, 0x00 }, + { ZD_CR94, 0x01 }, { ZD_CR95, 0x00 }, { ZD_CR96, 0x50 }, + { ZD_CR97, 0x37 }, { ZD_CR98, 0x35 }, { ZD_CR101, 0x13 }, + { ZD_CR102, 0x27 }, { ZD_CR103, 0x27 }, { ZD_CR104, 0x18 }, + { ZD_CR105, 0x12 }, { ZD_CR109, 0x27 }, { ZD_CR110, 0x27 }, + { ZD_CR111, 0x27 }, { ZD_CR112, 0x27 }, { ZD_CR113, 0x27 }, + { ZD_CR114, 0x27 }, { ZD_CR115, 0x26 }, { ZD_CR116, 0x24 }, + { ZD_CR117, 0xfc }, { ZD_CR118, 0xfa }, { ZD_CR120, 0x4f }, + { ZD_CR125, 0xaa }, { ZD_CR127, 0x03 }, { ZD_CR128, 0x14 }, + { ZD_CR129, 0x12 }, { ZD_CR130, 0x10 }, { ZD_CR131, 0x0C }, + { ZD_CR136, 0xdf }, { ZD_CR137, 0x40 }, { ZD_CR138, 0xa0 }, + { ZD_CR139, 0xb0 }, { ZD_CR140, 0x99 }, { ZD_CR141, 0x82 }, + { ZD_CR142, 0x54 }, { ZD_CR143, 0x1c }, { ZD_CR144, 0x6c }, + { ZD_CR147, 0x07 }, { ZD_CR148, 0x4c }, { ZD_CR149, 0x50 }, + { ZD_CR150, 0x0e }, { ZD_CR151, 0x18 }, { ZD_CR160, 0xfe }, + { ZD_CR161, 0xee }, { ZD_CR162, 0xaa }, { ZD_CR163, 0xfa }, + { ZD_CR164, 0xfa }, { ZD_CR165, 0xea }, { ZD_CR166, 0xbe }, + { ZD_CR167, 0xbe }, { ZD_CR168, 0x6a }, { ZD_CR169, 0xba }, + { ZD_CR170, 0xba }, { ZD_CR171, 0xba }, + /* Note: ZD_CR204 must lead the ZD_CR203 */ + { ZD_CR204, 0x7d }, + { }, + { ZD_CR203, 0x30 }, + }; + + int r, t; + + dev_dbg_f(zd_chip_dev(chip), "\n"); + + r = zd_chip_lock_phy_regs(chip); + if (r) + goto out; + + r = zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); + if (r) + goto unlock; + + r = patch_cr157(chip); +unlock: + t = zd_chip_unlock_phy_regs(chip); + if (t && !r) + r = t; +out: + return r; +} + +static int zd1211b_hw_reset_phy(struct zd_chip *chip) +{ + static const struct zd_ioreq16 ioreqs[] = { + { ZD_CR0, 0x14 }, { ZD_CR1, 0x06 }, { ZD_CR2, 0x26 }, + { ZD_CR3, 0x38 }, { ZD_CR4, 0x80 }, { ZD_CR9, 0xe0 }, + { ZD_CR10, 0x81 }, + /* power control { { ZD_CR11, 1 << 6 }, */ + { ZD_CR11, 0x00 }, + { ZD_CR12, 0xf0 }, { ZD_CR13, 0x8c }, { ZD_CR14, 0x80 }, + { ZD_CR15, 0x3d }, { ZD_CR16, 0x20 }, { ZD_CR17, 0x1e }, + { ZD_CR18, 0x0a }, { ZD_CR19, 0x48 }, + { ZD_CR20, 0x10 }, /* Org:0x0E, ComTrend:RalLink AP */ + { ZD_CR21, 0x0e }, { ZD_CR22, 0x23 }, { ZD_CR23, 0x90 }, + { ZD_CR24, 0x14 }, { ZD_CR25, 0x40 }, { ZD_CR26, 0x10 }, + { ZD_CR27, 0x10 }, { ZD_CR28, 0x7f }, { ZD_CR29, 0x80 }, + { ZD_CR30, 0x4b }, /* ASIC/FWT, no jointly decoder */ + { ZD_CR31, 0x60 }, { ZD_CR32, 0x43 }, { ZD_CR33, 0x08 }, + { ZD_CR34, 0x06 }, { ZD_CR35, 0x0a }, { ZD_CR36, 0x00 }, + { ZD_CR37, 0x00 }, { ZD_CR38, 0x38 }, { ZD_CR39, 0x0c }, + { ZD_CR40, 0x84 }, { ZD_CR41, 0x2a }, { ZD_CR42, 0x80 }, + { ZD_CR43, 0x10 }, { ZD_CR44, 0x33 }, { ZD_CR46, 0xff }, + { ZD_CR47, 0x1E }, { ZD_CR48, 0x26 }, { ZD_CR49, 0x5b }, + { ZD_CR64, 0xd0 }, { ZD_CR65, 0x04 }, { ZD_CR66, 0x58 }, + { ZD_CR67, 0xc9 }, { ZD_CR68, 0x88 }, { ZD_CR69, 0x41 }, + { ZD_CR70, 0x23 }, { ZD_CR71, 0x10 }, { ZD_CR72, 0xff }, + { ZD_CR73, 0x32 }, { ZD_CR74, 0x30 }, { ZD_CR75, 0x65 }, + { ZD_CR76, 0x41 }, { ZD_CR77, 0x1b }, { ZD_CR78, 0x30 }, + { ZD_CR79, 0xf0 }, { ZD_CR80, 0x64 }, { ZD_CR81, 0x64 }, + { ZD_CR82, 0x00 }, { ZD_CR83, 0x24 }, { ZD_CR84, 0x04 }, + { ZD_CR85, 0x00 }, { ZD_CR86, 0x0c }, { ZD_CR87, 0x12 }, + { ZD_CR88, 0x0c }, { ZD_CR89, 0x00 }, { ZD_CR90, 0x58 }, + { ZD_CR91, 0x04 }, { ZD_CR92, 0x00 }, { ZD_CR93, 0x00 }, + { ZD_CR94, 0x01 }, + { ZD_CR95, 0x20 }, /* ZD1211B */ + { ZD_CR96, 0x50 }, { ZD_CR97, 0x37 }, { ZD_CR98, 0x35 }, + { ZD_CR99, 0x00 }, { ZD_CR100, 0x01 }, { ZD_CR101, 0x13 }, + { ZD_CR102, 0x27 }, { ZD_CR103, 0x27 }, { ZD_CR104, 0x18 }, + { ZD_CR105, 0x12 }, { ZD_CR106, 0x04 }, { ZD_CR107, 0x00 }, + { ZD_CR108, 0x0a }, { ZD_CR109, 0x27 }, { ZD_CR110, 0x27 }, + { ZD_CR111, 0x27 }, { ZD_CR112, 0x27 }, { ZD_CR113, 0x27 }, + { ZD_CR114, 0x27 }, { ZD_CR115, 0x26 }, { ZD_CR116, 0x24 }, + { ZD_CR117, 0xfc }, { ZD_CR118, 0xfa }, { ZD_CR119, 0x1e }, + { ZD_CR125, 0x90 }, { ZD_CR126, 0x00 }, { ZD_CR127, 0x00 }, + { ZD_CR128, 0x14 }, { ZD_CR129, 0x12 }, { ZD_CR130, 0x10 }, + { ZD_CR131, 0x0c }, { ZD_CR136, 0xdf }, { ZD_CR137, 0xa0 }, + { ZD_CR138, 0xa8 }, { ZD_CR139, 0xb4 }, { ZD_CR140, 0x98 }, + { ZD_CR141, 0x82 }, { ZD_CR142, 0x53 }, { ZD_CR143, 0x1c }, + { ZD_CR144, 0x6c }, { ZD_CR147, 0x07 }, { ZD_CR148, 0x40 }, + { ZD_CR149, 0x40 }, /* Org:0x50 ComTrend:RalLink AP */ + { ZD_CR150, 0x14 }, /* Org:0x0E ComTrend:RalLink AP */ + { ZD_CR151, 0x18 }, { ZD_CR159, 0x70 }, { ZD_CR160, 0xfe }, + { ZD_CR161, 0xee }, { ZD_CR162, 0xaa }, { ZD_CR163, 0xfa }, + { ZD_CR164, 0xfa }, { ZD_CR165, 0xea }, { ZD_CR166, 0xbe }, + { ZD_CR167, 0xbe }, { ZD_CR168, 0x6a }, { ZD_CR169, 0xba }, + { ZD_CR170, 0xba }, { ZD_CR171, 0xba }, + /* Note: ZD_CR204 must lead the ZD_CR203 */ + { ZD_CR204, 0x7d }, + {}, + { ZD_CR203, 0x30 }, + }; + + int r, t; + + dev_dbg_f(zd_chip_dev(chip), "\n"); + + r = zd_chip_lock_phy_regs(chip); + if (r) + goto out; + + r = zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); + t = zd_chip_unlock_phy_regs(chip); + if (t && !r) + r = t; +out: + return r; +} + +static int hw_reset_phy(struct zd_chip *chip) +{ + return zd_chip_is_zd1211b(chip) ? zd1211b_hw_reset_phy(chip) : + zd1211_hw_reset_phy(chip); +} + +static int zd1211_hw_init_hmac(struct zd_chip *chip) +{ + static const struct zd_ioreq32 ioreqs[] = { + { CR_ZD1211_RETRY_MAX, ZD1211_RETRY_COUNT }, + { CR_RX_THRESHOLD, 0x000c0640 }, + }; + + dev_dbg_f(zd_chip_dev(chip), "\n"); + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + return zd_iowrite32a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); +} + +static int zd1211b_hw_init_hmac(struct zd_chip *chip) +{ + static const struct zd_ioreq32 ioreqs[] = { + { CR_ZD1211B_RETRY_MAX, ZD1211B_RETRY_COUNT }, + { CR_ZD1211B_CWIN_MAX_MIN_AC0, 0x007f003f }, + { CR_ZD1211B_CWIN_MAX_MIN_AC1, 0x007f003f }, + { CR_ZD1211B_CWIN_MAX_MIN_AC2, 0x003f001f }, + { CR_ZD1211B_CWIN_MAX_MIN_AC3, 0x001f000f }, + { CR_ZD1211B_AIFS_CTL1, 0x00280028 }, + { CR_ZD1211B_AIFS_CTL2, 0x008C003C }, + { CR_ZD1211B_TXOP, 0x01800824 }, + { CR_RX_THRESHOLD, 0x000c0eff, }, + }; + + dev_dbg_f(zd_chip_dev(chip), "\n"); + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + return zd_iowrite32a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); +} + +static int hw_init_hmac(struct zd_chip *chip) +{ + int r; + static const struct zd_ioreq32 ioreqs[] = { + { CR_ACK_TIMEOUT_EXT, 0x20 }, + { CR_ADDA_MBIAS_WARMTIME, 0x30000808 }, + { CR_SNIFFER_ON, 0 }, + { CR_RX_FILTER, STA_RX_FILTER }, + { CR_GROUP_HASH_P1, 0x00 }, + { CR_GROUP_HASH_P2, 0x80000000 }, + { CR_REG1, 0xa4 }, + { CR_ADDA_PWR_DWN, 0x7f }, + { CR_BCN_PLCP_CFG, 0x00f00401 }, + { CR_PHY_DELAY, 0x00 }, + { CR_ACK_TIMEOUT_EXT, 0x80 }, + { CR_ADDA_PWR_DWN, 0x00 }, + { CR_ACK_TIME_80211, 0x100 }, + { CR_RX_PE_DELAY, 0x70 }, + { CR_PS_CTRL, 0x10000000 }, + { CR_RTS_CTS_RATE, 0x02030203 }, + { CR_AFTER_PNP, 0x1 }, + { CR_WEP_PROTECT, 0x114 }, + { CR_IFS_VALUE, IFS_VALUE_DEFAULT }, + { CR_CAM_MODE, MODE_AP_WDS}, + }; + + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + r = zd_iowrite32a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); + if (r) + return r; + + return zd_chip_is_zd1211b(chip) ? + zd1211b_hw_init_hmac(chip) : zd1211_hw_init_hmac(chip); +} + +struct aw_pt_bi { + u32 atim_wnd_period; + u32 pre_tbtt; + u32 beacon_interval; +}; + +static int get_aw_pt_bi(struct zd_chip *chip, struct aw_pt_bi *s) +{ + int r; + static const zd_addr_t aw_pt_bi_addr[] = + { CR_ATIM_WND_PERIOD, CR_PRE_TBTT, CR_BCN_INTERVAL }; + u32 values[3]; + + r = zd_ioread32v_locked(chip, values, (const zd_addr_t *)aw_pt_bi_addr, + ARRAY_SIZE(aw_pt_bi_addr)); + if (r) { + memset(s, 0, sizeof(*s)); + return r; + } + + s->atim_wnd_period = values[0]; + s->pre_tbtt = values[1]; + s->beacon_interval = values[2]; + return 0; +} + +static int set_aw_pt_bi(struct zd_chip *chip, struct aw_pt_bi *s) +{ + struct zd_ioreq32 reqs[3]; + u16 b_interval = s->beacon_interval & 0xffff; + + if (b_interval <= 5) + b_interval = 5; + if (s->pre_tbtt < 4 || s->pre_tbtt >= b_interval) + s->pre_tbtt = b_interval - 1; + if (s->atim_wnd_period >= s->pre_tbtt) + s->atim_wnd_period = s->pre_tbtt - 1; + + reqs[0].addr = CR_ATIM_WND_PERIOD; + reqs[0].value = s->atim_wnd_period; + reqs[1].addr = CR_PRE_TBTT; + reqs[1].value = s->pre_tbtt; + reqs[2].addr = CR_BCN_INTERVAL; + reqs[2].value = (s->beacon_interval & ~0xffff) | b_interval; + + return zd_iowrite32a_locked(chip, reqs, ARRAY_SIZE(reqs)); +} + + +static int set_beacon_interval(struct zd_chip *chip, u16 interval, + u8 dtim_period, int type) +{ + int r; + struct aw_pt_bi s; + u32 b_interval, mode_flag; + + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + + if (interval > 0) { + switch (type) { + case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_MESH_POINT: + mode_flag = BCN_MODE_IBSS; + break; + case NL80211_IFTYPE_AP: + mode_flag = BCN_MODE_AP; + break; + default: + mode_flag = 0; + break; + } + } else { + dtim_period = 0; + mode_flag = 0; + } + + b_interval = mode_flag | (dtim_period << 16) | interval; + + r = zd_iowrite32_locked(chip, b_interval, CR_BCN_INTERVAL); + if (r) + return r; + r = get_aw_pt_bi(chip, &s); + if (r) + return r; + return set_aw_pt_bi(chip, &s); +} + +int zd_set_beacon_interval(struct zd_chip *chip, u16 interval, u8 dtim_period, + int type) +{ + int r; + + mutex_lock(&chip->mutex); + r = set_beacon_interval(chip, interval, dtim_period, type); + mutex_unlock(&chip->mutex); + return r; +} + +static int hw_init(struct zd_chip *chip) +{ + int r; + + dev_dbg_f(zd_chip_dev(chip), "\n"); + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + r = hw_reset_phy(chip); + if (r) + return r; + + r = hw_init_hmac(chip); + if (r) + return r; + + return set_beacon_interval(chip, 100, 0, NL80211_IFTYPE_UNSPECIFIED); +} + +static zd_addr_t fw_reg_addr(struct zd_chip *chip, u16 offset) +{ + return (zd_addr_t)((u16)chip->fw_regs_base + offset); +} + +#ifdef DEBUG +static int dump_cr(struct zd_chip *chip, const zd_addr_t addr, + const char *addr_string) +{ + int r; + u32 value; + + r = zd_ioread32_locked(chip, &value, addr); + if (r) { + dev_dbg_f(zd_chip_dev(chip), + "error reading %s. Error number %d\n", addr_string, r); + return r; + } + + dev_dbg_f(zd_chip_dev(chip), "%s %#010x\n", + addr_string, (unsigned int)value); + return 0; +} + +static int test_init(struct zd_chip *chip) +{ + int r; + + r = dump_cr(chip, CR_AFTER_PNP, "CR_AFTER_PNP"); + if (r) + return r; + r = dump_cr(chip, CR_GPI_EN, "CR_GPI_EN"); + if (r) + return r; + return dump_cr(chip, CR_INTERRUPT, "CR_INTERRUPT"); +} + +static void dump_fw_registers(struct zd_chip *chip) +{ + const zd_addr_t addr[4] = { + fw_reg_addr(chip, FW_REG_FIRMWARE_VER), + fw_reg_addr(chip, FW_REG_USB_SPEED), + fw_reg_addr(chip, FW_REG_FIX_TX_RATE), + fw_reg_addr(chip, FW_REG_LED_LINK_STATUS), + }; + + int r; + u16 values[4]; + + r = zd_ioread16v_locked(chip, values, (const zd_addr_t*)addr, + ARRAY_SIZE(addr)); + if (r) { + dev_dbg_f(zd_chip_dev(chip), "error %d zd_ioread16v_locked\n", + r); + return; + } + + dev_dbg_f(zd_chip_dev(chip), "FW_FIRMWARE_VER %#06hx\n", values[0]); + dev_dbg_f(zd_chip_dev(chip), "FW_USB_SPEED %#06hx\n", values[1]); + dev_dbg_f(zd_chip_dev(chip), "FW_FIX_TX_RATE %#06hx\n", values[2]); + dev_dbg_f(zd_chip_dev(chip), "FW_LINK_STATUS %#06hx\n", values[3]); +} +#endif /* DEBUG */ + +static int print_fw_version(struct zd_chip *chip) +{ + struct wiphy *wiphy = zd_chip_to_mac(chip)->hw->wiphy; + int r; + u16 version; + + r = zd_ioread16_locked(chip, &version, + fw_reg_addr(chip, FW_REG_FIRMWARE_VER)); + if (r) + return r; + + dev_info(zd_chip_dev(chip),"firmware version %04hx\n", version); + + snprintf(wiphy->fw_version, sizeof(wiphy->fw_version), + "%04hx", version); + + return 0; +} + +static int set_mandatory_rates(struct zd_chip *chip, int gmode) +{ + u32 rates; + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + /* This sets the mandatory rates, which only depend from the standard + * that the device is supporting. Until further notice we should try + * to support 802.11g also for full speed USB. + */ + if (!gmode) + rates = CR_RATE_1M|CR_RATE_2M|CR_RATE_5_5M|CR_RATE_11M; + else + rates = CR_RATE_1M|CR_RATE_2M|CR_RATE_5_5M|CR_RATE_11M| + CR_RATE_6M|CR_RATE_12M|CR_RATE_24M; + + return zd_iowrite32_locked(chip, rates, CR_MANDATORY_RATE_TBL); +} + +int zd_chip_set_rts_cts_rate_locked(struct zd_chip *chip, + int preamble) +{ + u32 value = 0; + + dev_dbg_f(zd_chip_dev(chip), "preamble=%x\n", preamble); + value |= preamble << RTSCTS_SH_RTS_PMB_TYPE; + value |= preamble << RTSCTS_SH_CTS_PMB_TYPE; + + /* We always send 11M RTS/self-CTS messages, like the vendor driver. */ + value |= ZD_PURE_RATE(ZD_CCK_RATE_11M) << RTSCTS_SH_RTS_RATE; + value |= ZD_RX_CCK << RTSCTS_SH_RTS_MOD_TYPE; + value |= ZD_PURE_RATE(ZD_CCK_RATE_11M) << RTSCTS_SH_CTS_RATE; + value |= ZD_RX_CCK << RTSCTS_SH_CTS_MOD_TYPE; + + return zd_iowrite32_locked(chip, value, CR_RTS_CTS_RATE); +} + +int zd_chip_enable_hwint(struct zd_chip *chip) +{ + int r; + + mutex_lock(&chip->mutex); + r = zd_iowrite32_locked(chip, HWINT_ENABLED, CR_INTERRUPT); + mutex_unlock(&chip->mutex); + return r; +} + +static int disable_hwint(struct zd_chip *chip) +{ + return zd_iowrite32_locked(chip, HWINT_DISABLED, CR_INTERRUPT); +} + +int zd_chip_disable_hwint(struct zd_chip *chip) +{ + int r; + + mutex_lock(&chip->mutex); + r = disable_hwint(chip); + mutex_unlock(&chip->mutex); + return r; +} + +static int read_fw_regs_offset(struct zd_chip *chip) +{ + int r; + + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + r = zd_ioread16_locked(chip, (u16*)&chip->fw_regs_base, + FWRAW_REGS_ADDR); + if (r) + return r; + dev_dbg_f(zd_chip_dev(chip), "fw_regs_base: %#06hx\n", + (u16)chip->fw_regs_base); + + return 0; +} + +/* Read mac address using pre-firmware interface */ +int zd_chip_read_mac_addr_fw(struct zd_chip *chip, u8 *addr) +{ + dev_dbg_f(zd_chip_dev(chip), "\n"); + return zd_usb_read_fw(&chip->usb, E2P_MAC_ADDR_P1, addr, + ETH_ALEN); +} + +int zd_chip_init_hw(struct zd_chip *chip) +{ + int r; + u8 rf_type; + + dev_dbg_f(zd_chip_dev(chip), "\n"); + + mutex_lock(&chip->mutex); + +#ifdef DEBUG + r = test_init(chip); + if (r) + goto out; +#endif + r = zd_iowrite32_locked(chip, 1, CR_AFTER_PNP); + if (r) + goto out; + + r = read_fw_regs_offset(chip); + if (r) + goto out; + + /* GPI is always disabled, also in the other driver. + */ + r = zd_iowrite32_locked(chip, 0, CR_GPI_EN); + if (r) + goto out; + r = zd_iowrite32_locked(chip, CWIN_SIZE, CR_CWMIN_CWMAX); + if (r) + goto out; + /* Currently we support IEEE 802.11g for full and high speed USB. + * It might be discussed, whether we should support pure b mode for + * full speed USB. + */ + r = set_mandatory_rates(chip, 1); + if (r) + goto out; + /* Disabling interrupts is certainly a smart thing here. + */ + r = disable_hwint(chip); + if (r) + goto out; + r = read_pod(chip, &rf_type); + if (r) + goto out; + r = hw_init(chip); + if (r) + goto out; + r = zd_rf_init_hw(&chip->rf, rf_type); + if (r) + goto out; + + r = print_fw_version(chip); + if (r) + goto out; + +#ifdef DEBUG + dump_fw_registers(chip); + r = test_init(chip); + if (r) + goto out; +#endif /* DEBUG */ + + r = read_cal_int_tables(chip); + if (r) + goto out; + + print_id(chip); +out: + mutex_unlock(&chip->mutex); + return r; +} + +static int update_pwr_int(struct zd_chip *chip, u8 channel) +{ + u8 value = chip->pwr_int_values[channel - 1]; + return zd_iowrite16_locked(chip, value, ZD_CR31); +} + +static int update_pwr_cal(struct zd_chip *chip, u8 channel) +{ + u8 value = chip->pwr_cal_values[channel-1]; + return zd_iowrite16_locked(chip, value, ZD_CR68); +} + +static int update_ofdm_cal(struct zd_chip *chip, u8 channel) +{ + struct zd_ioreq16 ioreqs[3]; + + ioreqs[0].addr = ZD_CR67; + ioreqs[0].value = chip->ofdm_cal_values[OFDM_36M_INDEX][channel-1]; + ioreqs[1].addr = ZD_CR66; + ioreqs[1].value = chip->ofdm_cal_values[OFDM_48M_INDEX][channel-1]; + ioreqs[2].addr = ZD_CR65; + ioreqs[2].value = chip->ofdm_cal_values[OFDM_54M_INDEX][channel-1]; + + return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); +} + +static int update_channel_integration_and_calibration(struct zd_chip *chip, + u8 channel) +{ + int r; + + if (!zd_rf_should_update_pwr_int(&chip->rf)) + return 0; + + r = update_pwr_int(chip, channel); + if (r) + return r; + if (zd_chip_is_zd1211b(chip)) { + static const struct zd_ioreq16 ioreqs[] = { + { ZD_CR69, 0x28 }, + {}, + { ZD_CR69, 0x2a }, + }; + + r = update_ofdm_cal(chip, channel); + if (r) + return r; + r = update_pwr_cal(chip, channel); + if (r) + return r; + r = zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); + if (r) + return r; + } + + return 0; +} + +/* The CCK baseband gain can be optionally patched by the EEPROM */ +static int patch_cck_gain(struct zd_chip *chip) +{ + int r; + u32 value; + + if (!chip->patch_cck_gain || !zd_rf_should_patch_cck_gain(&chip->rf)) + return 0; + + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + r = zd_ioread32_locked(chip, &value, E2P_PHY_REG); + if (r) + return r; + dev_dbg_f(zd_chip_dev(chip), "patching value %x\n", value & 0xff); + return zd_iowrite16_locked(chip, value & 0xff, ZD_CR47); +} + +int zd_chip_set_channel(struct zd_chip *chip, u8 channel) +{ + int r, t; + + mutex_lock(&chip->mutex); + r = zd_chip_lock_phy_regs(chip); + if (r) + goto out; + r = zd_rf_set_channel(&chip->rf, channel); + if (r) + goto unlock; + r = update_channel_integration_and_calibration(chip, channel); + if (r) + goto unlock; + r = patch_cck_gain(chip); + if (r) + goto unlock; + r = patch_6m_band_edge(chip, channel); + if (r) + goto unlock; + r = zd_iowrite32_locked(chip, 0, CR_CONFIG_PHILIPS); +unlock: + t = zd_chip_unlock_phy_regs(chip); + if (t && !r) + r = t; +out: + mutex_unlock(&chip->mutex); + return r; +} + +u8 zd_chip_get_channel(struct zd_chip *chip) +{ + u8 channel; + + mutex_lock(&chip->mutex); + channel = chip->rf.channel; + mutex_unlock(&chip->mutex); + return channel; +} + +int zd_chip_control_leds(struct zd_chip *chip, enum led_status status) +{ + const zd_addr_t a[] = { + fw_reg_addr(chip, FW_REG_LED_LINK_STATUS), + CR_LED, + }; + + int r; + u16 v[ARRAY_SIZE(a)]; + struct zd_ioreq16 ioreqs[ARRAY_SIZE(a)] = { + [0] = { fw_reg_addr(chip, FW_REG_LED_LINK_STATUS) }, + [1] = { CR_LED }, + }; + u16 other_led; + + mutex_lock(&chip->mutex); + r = zd_ioread16v_locked(chip, v, (const zd_addr_t *)a, ARRAY_SIZE(a)); + if (r) + goto out; + + other_led = chip->link_led == LED1 ? LED2 : LED1; + + switch (status) { + case ZD_LED_OFF: + ioreqs[0].value = FW_LINK_OFF; + ioreqs[1].value = v[1] & ~(LED1|LED2); + break; + case ZD_LED_SCANNING: + ioreqs[0].value = FW_LINK_OFF; + ioreqs[1].value = v[1] & ~other_led; + if ((u32)ktime_get_seconds() % 3 == 0) { + ioreqs[1].value &= ~chip->link_led; + } else { + ioreqs[1].value |= chip->link_led; + } + break; + case ZD_LED_ASSOCIATED: + ioreqs[0].value = FW_LINK_TX; + ioreqs[1].value = v[1] & ~other_led; + ioreqs[1].value |= chip->link_led; + break; + default: + r = -EINVAL; + goto out; + } + + if (v[0] != ioreqs[0].value || v[1] != ioreqs[1].value) { + r = zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); + if (r) + goto out; + } + r = 0; +out: + mutex_unlock(&chip->mutex); + return r; +} + +int zd_chip_set_basic_rates(struct zd_chip *chip, u16 cr_rates) +{ + int r; + + if (cr_rates & ~(CR_RATES_80211B|CR_RATES_80211G)) + return -EINVAL; + + mutex_lock(&chip->mutex); + r = zd_iowrite32_locked(chip, cr_rates, CR_BASIC_RATE_TBL); + mutex_unlock(&chip->mutex); + return r; +} + +static inline u8 zd_rate_from_ofdm_plcp_header(const void *rx_frame) +{ + return ZD_OFDM | zd_ofdm_plcp_header_rate(rx_frame); +} + +/** + * zd_rx_rate - report zd-rate + * @rx_frame: received frame + * @status: rx_status as given by the device + * + * This function converts the rate as encoded in the received packet to the + * zd-rate, we are using on other places in the driver. + */ +u8 zd_rx_rate(const void *rx_frame, const struct rx_status *status) +{ + u8 zd_rate; + if (status->frame_status & ZD_RX_OFDM) { + zd_rate = zd_rate_from_ofdm_plcp_header(rx_frame); + } else { + switch (zd_cck_plcp_header_signal(rx_frame)) { + case ZD_CCK_PLCP_SIGNAL_1M: + zd_rate = ZD_CCK_RATE_1M; + break; + case ZD_CCK_PLCP_SIGNAL_2M: + zd_rate = ZD_CCK_RATE_2M; + break; + case ZD_CCK_PLCP_SIGNAL_5M5: + zd_rate = ZD_CCK_RATE_5_5M; + break; + case ZD_CCK_PLCP_SIGNAL_11M: + zd_rate = ZD_CCK_RATE_11M; + break; + default: + zd_rate = 0; + } + } + + return zd_rate; +} + +int zd_chip_switch_radio_on(struct zd_chip *chip) +{ + int r; + + mutex_lock(&chip->mutex); + r = zd_switch_radio_on(&chip->rf); + mutex_unlock(&chip->mutex); + return r; +} + +int zd_chip_switch_radio_off(struct zd_chip *chip) +{ + int r; + + mutex_lock(&chip->mutex); + r = zd_switch_radio_off(&chip->rf); + mutex_unlock(&chip->mutex); + return r; +} + +int zd_chip_enable_int(struct zd_chip *chip) +{ + int r; + + mutex_lock(&chip->mutex); + r = zd_usb_enable_int(&chip->usb); + mutex_unlock(&chip->mutex); + return r; +} + +void zd_chip_disable_int(struct zd_chip *chip) +{ + mutex_lock(&chip->mutex); + zd_usb_disable_int(&chip->usb); + mutex_unlock(&chip->mutex); + + /* cancel pending interrupt work */ + cancel_work_sync(&zd_chip_to_mac(chip)->process_intr); +} + +int zd_chip_enable_rxtx(struct zd_chip *chip) +{ + int r; + + mutex_lock(&chip->mutex); + zd_usb_enable_tx(&chip->usb); + r = zd_usb_enable_rx(&chip->usb); + zd_tx_watchdog_enable(&chip->usb); + mutex_unlock(&chip->mutex); + return r; +} + +void zd_chip_disable_rxtx(struct zd_chip *chip) +{ + mutex_lock(&chip->mutex); + zd_tx_watchdog_disable(&chip->usb); + zd_usb_disable_rx(&chip->usb); + zd_usb_disable_tx(&chip->usb); + mutex_unlock(&chip->mutex); +} + +int zd_rfwritev_locked(struct zd_chip *chip, + const u32* values, unsigned int count, u8 bits) +{ + int r; + unsigned int i; + + for (i = 0; i < count; i++) { + r = zd_rfwrite_locked(chip, values[i], bits); + if (r) + return r; + } + + return 0; +} + +/* + * We can optionally program the RF directly through CR regs, if supported by + * the hardware. This is much faster than the older method. + */ +int zd_rfwrite_cr_locked(struct zd_chip *chip, u32 value) +{ + const struct zd_ioreq16 ioreqs[] = { + { ZD_CR244, (value >> 16) & 0xff }, + { ZD_CR243, (value >> 8) & 0xff }, + { ZD_CR242, value & 0xff }, + }; + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); +} + +int zd_rfwritev_cr_locked(struct zd_chip *chip, + const u32 *values, unsigned int count) +{ + int r; + unsigned int i; + + for (i = 0; i < count; i++) { + r = zd_rfwrite_cr_locked(chip, values[i]); + if (r) + return r; + } + + return 0; +} + +int zd_chip_set_multicast_hash(struct zd_chip *chip, + struct zd_mc_hash *hash) +{ + const struct zd_ioreq32 ioreqs[] = { + { CR_GROUP_HASH_P1, hash->low }, + { CR_GROUP_HASH_P2, hash->high }, + }; + + return zd_iowrite32a(chip, ioreqs, ARRAY_SIZE(ioreqs)); +} + +u64 zd_chip_get_tsf(struct zd_chip *chip) +{ + int r; + static const zd_addr_t aw_pt_bi_addr[] = + { CR_TSF_LOW_PART, CR_TSF_HIGH_PART }; + u32 values[2]; + u64 tsf; + + mutex_lock(&chip->mutex); + r = zd_ioread32v_locked(chip, values, (const zd_addr_t *)aw_pt_bi_addr, + ARRAY_SIZE(aw_pt_bi_addr)); + mutex_unlock(&chip->mutex); + if (r) + return 0; + + tsf = values[1]; + tsf = (tsf << 32) | values[0]; + + return tsf; +} diff --git a/drivers/net/wireless/zydas/zd1211rw/zd_chip.h b/drivers/net/wireless/zydas/zd1211rw/zd_chip.h new file mode 100644 index 000000000..70a1548eb --- /dev/null +++ b/drivers/net/wireless/zydas/zd1211rw/zd_chip.h @@ -0,0 +1,971 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* ZD1211 USB-WLAN driver for Linux + * + * Copyright (C) 2005-2007 Ulrich Kunitz <kune@deine-taler.de> + * Copyright (C) 2006-2007 Daniel Drake <dsd@gentoo.org> + */ + +#ifndef _ZD_CHIP_H +#define _ZD_CHIP_H + +#include <net/mac80211.h> + +#include "zd_rf.h" +#include "zd_usb.h" + +/* Header for the Media Access Controller (MAC) and the Baseband Processor + * (BBP). It appears that the ZD1211 wraps the old ZD1205 with USB glue and + * adds a processor for handling the USB protocol. + */ + +/* Address space */ +enum { + /* CONTROL REGISTERS */ + CR_START = 0x9000, + + + /* FIRMWARE */ + FW_START = 0xee00, + + + /* EEPROM */ + E2P_START = 0xf800, + E2P_LEN = 0x800, + + /* EEPROM layout */ + E2P_LOAD_CODE_LEN = 0xe, /* base 0xf800 */ + E2P_LOAD_VECT_LEN = 0x9, /* base 0xf80e */ + /* E2P_DATA indexes into this */ + E2P_DATA_LEN = 0x7e, /* base 0xf817 */ + E2P_BOOT_CODE_LEN = 0x760, /* base 0xf895 */ + E2P_INTR_VECT_LEN = 0xb, /* base 0xfff5 */ + + /* Some precomputed offsets into the EEPROM */ + E2P_DATA_OFFSET = E2P_LOAD_CODE_LEN + E2P_LOAD_VECT_LEN, + E2P_BOOT_CODE_OFFSET = E2P_DATA_OFFSET + E2P_DATA_LEN, +}; + +#define CTL_REG(offset) ((zd_addr_t)(CR_START + (offset))) +#define E2P_DATA(offset) ((zd_addr_t)(E2P_START + E2P_DATA_OFFSET + (offset))) +#define FWRAW_DATA(offset) ((zd_addr_t)(FW_START + (offset))) + +/* 8-bit hardware registers */ +#define ZD_CR0 CTL_REG(0x0000) +#define ZD_CR1 CTL_REG(0x0004) +#define ZD_CR2 CTL_REG(0x0008) +#define ZD_CR3 CTL_REG(0x000C) + +#define ZD_CR5 CTL_REG(0x0010) +/* bit 5: if set short preamble used + * bit 6: filter band - Japan channel 14 on, else off + */ +#define ZD_CR6 CTL_REG(0x0014) +#define ZD_CR7 CTL_REG(0x0018) +#define ZD_CR8 CTL_REG(0x001C) + +#define ZD_CR4 CTL_REG(0x0020) + +#define ZD_CR9 CTL_REG(0x0024) +/* bit 2: antenna switch (together with ZD_CR10) */ +#define ZD_CR10 CTL_REG(0x0028) +/* bit 1: antenna switch (together with ZD_CR9) + * RF2959 controls with ZD_CR11 radion on and off + */ +#define ZD_CR11 CTL_REG(0x002C) +/* bit 6: TX power control for OFDM + * RF2959 controls with ZD_CR10 radio on and off + */ +#define ZD_CR12 CTL_REG(0x0030) +#define ZD_CR13 CTL_REG(0x0034) +#define ZD_CR14 CTL_REG(0x0038) +#define ZD_CR15 CTL_REG(0x003C) +#define ZD_CR16 CTL_REG(0x0040) +#define ZD_CR17 CTL_REG(0x0044) +#define ZD_CR18 CTL_REG(0x0048) +#define ZD_CR19 CTL_REG(0x004C) +#define ZD_CR20 CTL_REG(0x0050) +#define ZD_CR21 CTL_REG(0x0054) +#define ZD_CR22 CTL_REG(0x0058) +#define ZD_CR23 CTL_REG(0x005C) +#define ZD_CR24 CTL_REG(0x0060) /* CCA threshold */ +#define ZD_CR25 CTL_REG(0x0064) +#define ZD_CR26 CTL_REG(0x0068) +#define ZD_CR27 CTL_REG(0x006C) +#define ZD_CR28 CTL_REG(0x0070) +#define ZD_CR29 CTL_REG(0x0074) +#define ZD_CR30 CTL_REG(0x0078) +#define ZD_CR31 CTL_REG(0x007C) /* TX power control for RF in + * CCK mode + */ +#define ZD_CR32 CTL_REG(0x0080) +#define ZD_CR33 CTL_REG(0x0084) +#define ZD_CR34 CTL_REG(0x0088) +#define ZD_CR35 CTL_REG(0x008C) +#define ZD_CR36 CTL_REG(0x0090) +#define ZD_CR37 CTL_REG(0x0094) +#define ZD_CR38 CTL_REG(0x0098) +#define ZD_CR39 CTL_REG(0x009C) +#define ZD_CR40 CTL_REG(0x00A0) +#define ZD_CR41 CTL_REG(0x00A4) +#define ZD_CR42 CTL_REG(0x00A8) +#define ZD_CR43 CTL_REG(0x00AC) +#define ZD_CR44 CTL_REG(0x00B0) +#define ZD_CR45 CTL_REG(0x00B4) +#define ZD_CR46 CTL_REG(0x00B8) +#define ZD_CR47 CTL_REG(0x00BC) /* CCK baseband gain + * (patch value might be in EEPROM) + */ +#define ZD_CR48 CTL_REG(0x00C0) +#define ZD_CR49 CTL_REG(0x00C4) +#define ZD_CR50 CTL_REG(0x00C8) +#define ZD_CR51 CTL_REG(0x00CC) /* TX power control for RF in + * 6-36M modes + */ +#define ZD_CR52 CTL_REG(0x00D0) /* TX power control for RF in + * 48M mode + */ +#define ZD_CR53 CTL_REG(0x00D4) /* TX power control for RF in + * 54M mode + */ +#define ZD_CR54 CTL_REG(0x00D8) +#define ZD_CR55 CTL_REG(0x00DC) +#define ZD_CR56 CTL_REG(0x00E0) +#define ZD_CR57 CTL_REG(0x00E4) +#define ZD_CR58 CTL_REG(0x00E8) +#define ZD_CR59 CTL_REG(0x00EC) +#define ZD_CR60 CTL_REG(0x00F0) +#define ZD_CR61 CTL_REG(0x00F4) +#define ZD_CR62 CTL_REG(0x00F8) +#define ZD_CR63 CTL_REG(0x00FC) +#define ZD_CR64 CTL_REG(0x0100) +#define ZD_CR65 CTL_REG(0x0104) /* OFDM 54M calibration */ +#define ZD_CR66 CTL_REG(0x0108) /* OFDM 48M calibration */ +#define ZD_CR67 CTL_REG(0x010C) /* OFDM 36M calibration */ +#define ZD_CR68 CTL_REG(0x0110) /* CCK calibration */ +#define ZD_CR69 CTL_REG(0x0114) +#define ZD_CR70 CTL_REG(0x0118) +#define ZD_CR71 CTL_REG(0x011C) +#define ZD_CR72 CTL_REG(0x0120) +#define ZD_CR73 CTL_REG(0x0124) +#define ZD_CR74 CTL_REG(0x0128) +#define ZD_CR75 CTL_REG(0x012C) +#define ZD_CR76 CTL_REG(0x0130) +#define ZD_CR77 CTL_REG(0x0134) +#define ZD_CR78 CTL_REG(0x0138) +#define ZD_CR79 CTL_REG(0x013C) +#define ZD_CR80 CTL_REG(0x0140) +#define ZD_CR81 CTL_REG(0x0144) +#define ZD_CR82 CTL_REG(0x0148) +#define ZD_CR83 CTL_REG(0x014C) +#define ZD_CR84 CTL_REG(0x0150) +#define ZD_CR85 CTL_REG(0x0154) +#define ZD_CR86 CTL_REG(0x0158) +#define ZD_CR87 CTL_REG(0x015C) +#define ZD_CR88 CTL_REG(0x0160) +#define ZD_CR89 CTL_REG(0x0164) +#define ZD_CR90 CTL_REG(0x0168) +#define ZD_CR91 CTL_REG(0x016C) +#define ZD_CR92 CTL_REG(0x0170) +#define ZD_CR93 CTL_REG(0x0174) +#define ZD_CR94 CTL_REG(0x0178) +#define ZD_CR95 CTL_REG(0x017C) +#define ZD_CR96 CTL_REG(0x0180) +#define ZD_CR97 CTL_REG(0x0184) +#define ZD_CR98 CTL_REG(0x0188) +#define ZD_CR99 CTL_REG(0x018C) +#define ZD_CR100 CTL_REG(0x0190) +#define ZD_CR101 CTL_REG(0x0194) +#define ZD_CR102 CTL_REG(0x0198) +#define ZD_CR103 CTL_REG(0x019C) +#define ZD_CR104 CTL_REG(0x01A0) +#define ZD_CR105 CTL_REG(0x01A4) +#define ZD_CR106 CTL_REG(0x01A8) +#define ZD_CR107 CTL_REG(0x01AC) +#define ZD_CR108 CTL_REG(0x01B0) +#define ZD_CR109 CTL_REG(0x01B4) +#define ZD_CR110 CTL_REG(0x01B8) +#define ZD_CR111 CTL_REG(0x01BC) +#define ZD_CR112 CTL_REG(0x01C0) +#define ZD_CR113 CTL_REG(0x01C4) +#define ZD_CR114 CTL_REG(0x01C8) +#define ZD_CR115 CTL_REG(0x01CC) +#define ZD_CR116 CTL_REG(0x01D0) +#define ZD_CR117 CTL_REG(0x01D4) +#define ZD_CR118 CTL_REG(0x01D8) +#define ZD_CR119 CTL_REG(0x01DC) +#define ZD_CR120 CTL_REG(0x01E0) +#define ZD_CR121 CTL_REG(0x01E4) +#define ZD_CR122 CTL_REG(0x01E8) +#define ZD_CR123 CTL_REG(0x01EC) +#define ZD_CR124 CTL_REG(0x01F0) +#define ZD_CR125 CTL_REG(0x01F4) +#define ZD_CR126 CTL_REG(0x01F8) +#define ZD_CR127 CTL_REG(0x01FC) +#define ZD_CR128 CTL_REG(0x0200) +#define ZD_CR129 CTL_REG(0x0204) +#define ZD_CR130 CTL_REG(0x0208) +#define ZD_CR131 CTL_REG(0x020C) +#define ZD_CR132 CTL_REG(0x0210) +#define ZD_CR133 CTL_REG(0x0214) +#define ZD_CR134 CTL_REG(0x0218) +#define ZD_CR135 CTL_REG(0x021C) +#define ZD_CR136 CTL_REG(0x0220) +#define ZD_CR137 CTL_REG(0x0224) +#define ZD_CR138 CTL_REG(0x0228) +#define ZD_CR139 CTL_REG(0x022C) +#define ZD_CR140 CTL_REG(0x0230) +#define ZD_CR141 CTL_REG(0x0234) +#define ZD_CR142 CTL_REG(0x0238) +#define ZD_CR143 CTL_REG(0x023C) +#define ZD_CR144 CTL_REG(0x0240) +#define ZD_CR145 CTL_REG(0x0244) +#define ZD_CR146 CTL_REG(0x0248) +#define ZD_CR147 CTL_REG(0x024C) +#define ZD_CR148 CTL_REG(0x0250) +#define ZD_CR149 CTL_REG(0x0254) +#define ZD_CR150 CTL_REG(0x0258) +#define ZD_CR151 CTL_REG(0x025C) +#define ZD_CR152 CTL_REG(0x0260) +#define ZD_CR153 CTL_REG(0x0264) +#define ZD_CR154 CTL_REG(0x0268) +#define ZD_CR155 CTL_REG(0x026C) +#define ZD_CR156 CTL_REG(0x0270) +#define ZD_CR157 CTL_REG(0x0274) +#define ZD_CR158 CTL_REG(0x0278) +#define ZD_CR159 CTL_REG(0x027C) +#define ZD_CR160 CTL_REG(0x0280) +#define ZD_CR161 CTL_REG(0x0284) +#define ZD_CR162 CTL_REG(0x0288) +#define ZD_CR163 CTL_REG(0x028C) +#define ZD_CR164 CTL_REG(0x0290) +#define ZD_CR165 CTL_REG(0x0294) +#define ZD_CR166 CTL_REG(0x0298) +#define ZD_CR167 CTL_REG(0x029C) +#define ZD_CR168 CTL_REG(0x02A0) +#define ZD_CR169 CTL_REG(0x02A4) +#define ZD_CR170 CTL_REG(0x02A8) +#define ZD_CR171 CTL_REG(0x02AC) +#define ZD_CR172 CTL_REG(0x02B0) +#define ZD_CR173 CTL_REG(0x02B4) +#define ZD_CR174 CTL_REG(0x02B8) +#define ZD_CR175 CTL_REG(0x02BC) +#define ZD_CR176 CTL_REG(0x02C0) +#define ZD_CR177 CTL_REG(0x02C4) +#define ZD_CR178 CTL_REG(0x02C8) +#define ZD_CR179 CTL_REG(0x02CC) +#define ZD_CR180 CTL_REG(0x02D0) +#define ZD_CR181 CTL_REG(0x02D4) +#define ZD_CR182 CTL_REG(0x02D8) +#define ZD_CR183 CTL_REG(0x02DC) +#define ZD_CR184 CTL_REG(0x02E0) +#define ZD_CR185 CTL_REG(0x02E4) +#define ZD_CR186 CTL_REG(0x02E8) +#define ZD_CR187 CTL_REG(0x02EC) +#define ZD_CR188 CTL_REG(0x02F0) +#define ZD_CR189 CTL_REG(0x02F4) +#define ZD_CR190 CTL_REG(0x02F8) +#define ZD_CR191 CTL_REG(0x02FC) +#define ZD_CR192 CTL_REG(0x0300) +#define ZD_CR193 CTL_REG(0x0304) +#define ZD_CR194 CTL_REG(0x0308) +#define ZD_CR195 CTL_REG(0x030C) +#define ZD_CR196 CTL_REG(0x0310) +#define ZD_CR197 CTL_REG(0x0314) +#define ZD_CR198 CTL_REG(0x0318) +#define ZD_CR199 CTL_REG(0x031C) +#define ZD_CR200 CTL_REG(0x0320) +#define ZD_CR201 CTL_REG(0x0324) +#define ZD_CR202 CTL_REG(0x0328) +#define ZD_CR203 CTL_REG(0x032C) /* I2C bus template value & flash + * control + */ +#define ZD_CR204 CTL_REG(0x0330) +#define ZD_CR205 CTL_REG(0x0334) +#define ZD_CR206 CTL_REG(0x0338) +#define ZD_CR207 CTL_REG(0x033C) +#define ZD_CR208 CTL_REG(0x0340) +#define ZD_CR209 CTL_REG(0x0344) +#define ZD_CR210 CTL_REG(0x0348) +#define ZD_CR211 CTL_REG(0x034C) +#define ZD_CR212 CTL_REG(0x0350) +#define ZD_CR213 CTL_REG(0x0354) +#define ZD_CR214 CTL_REG(0x0358) +#define ZD_CR215 CTL_REG(0x035C) +#define ZD_CR216 CTL_REG(0x0360) +#define ZD_CR217 CTL_REG(0x0364) +#define ZD_CR218 CTL_REG(0x0368) +#define ZD_CR219 CTL_REG(0x036C) +#define ZD_CR220 CTL_REG(0x0370) +#define ZD_CR221 CTL_REG(0x0374) +#define ZD_CR222 CTL_REG(0x0378) +#define ZD_CR223 CTL_REG(0x037C) +#define ZD_CR224 CTL_REG(0x0380) +#define ZD_CR225 CTL_REG(0x0384) +#define ZD_CR226 CTL_REG(0x0388) +#define ZD_CR227 CTL_REG(0x038C) +#define ZD_CR228 CTL_REG(0x0390) +#define ZD_CR229 CTL_REG(0x0394) +#define ZD_CR230 CTL_REG(0x0398) +#define ZD_CR231 CTL_REG(0x039C) +#define ZD_CR232 CTL_REG(0x03A0) +#define ZD_CR233 CTL_REG(0x03A4) +#define ZD_CR234 CTL_REG(0x03A8) +#define ZD_CR235 CTL_REG(0x03AC) +#define ZD_CR236 CTL_REG(0x03B0) + +#define ZD_CR240 CTL_REG(0x03C0) +/* bit 7: host-controlled RF register writes + * ZD_CR241-ZD_CR245: for hardware controlled writing of RF bits, not needed for + * USB + */ +#define ZD_CR241 CTL_REG(0x03C4) +#define ZD_CR242 CTL_REG(0x03C8) +#define ZD_CR243 CTL_REG(0x03CC) +#define ZD_CR244 CTL_REG(0x03D0) +#define ZD_CR245 CTL_REG(0x03D4) + +#define ZD_CR251 CTL_REG(0x03EC) /* only used for activation and + * deactivation of Airoha RFs AL2230 + * and AL7230B + */ +#define ZD_CR252 CTL_REG(0x03F0) +#define ZD_CR253 CTL_REG(0x03F4) +#define ZD_CR254 CTL_REG(0x03F8) +#define ZD_CR255 CTL_REG(0x03FC) + +#define CR_MAX_PHY_REG 255 + +/* Taken from the ZYDAS driver, not all of them are relevant for the ZD1211 + * driver. + */ + +#define CR_RF_IF_CLK CTL_REG(0x0400) +#define CR_RF_IF_DATA CTL_REG(0x0404) +#define CR_PE1_PE2 CTL_REG(0x0408) +#define CR_PE2_DLY CTL_REG(0x040C) +#define CR_LE1 CTL_REG(0x0410) +#define CR_LE2 CTL_REG(0x0414) +/* Seems to enable/disable GPI (General Purpose IO?) */ +#define CR_GPI_EN CTL_REG(0x0418) +#define CR_RADIO_PD CTL_REG(0x042C) +#define CR_RF2948_PD CTL_REG(0x042C) +#define CR_ENABLE_PS_MANUAL_AGC CTL_REG(0x043C) +#define CR_CONFIG_PHILIPS CTL_REG(0x0440) +#define CR_SA2400_SER_AP CTL_REG(0x0444) +#define CR_I2C_WRITE CTL_REG(0x0444) +#define CR_SA2400_SER_RP CTL_REG(0x0448) +#define CR_RADIO_PE CTL_REG(0x0458) +#define CR_RST_BUS_MASTER CTL_REG(0x045C) +#define CR_RFCFG CTL_REG(0x0464) +#define CR_HSTSCHG CTL_REG(0x046C) +#define CR_PHY_ON CTL_REG(0x0474) +#define CR_RX_DELAY CTL_REG(0x0478) +#define CR_RX_PE_DELAY CTL_REG(0x047C) +#define CR_GPIO_1 CTL_REG(0x0490) +#define CR_GPIO_2 CTL_REG(0x0494) +#define CR_EncryBufMux CTL_REG(0x04A8) +#define CR_PS_CTRL CTL_REG(0x0500) +#define CR_ADDA_PWR_DWN CTL_REG(0x0504) +#define CR_ADDA_MBIAS_WARMTIME CTL_REG(0x0508) +#define CR_MAC_PS_STATE CTL_REG(0x050C) + +#define CR_INTERRUPT CTL_REG(0x0510) +#define INT_TX_COMPLETE (1 << 0) +#define INT_RX_COMPLETE (1 << 1) +#define INT_RETRY_FAIL (1 << 2) +#define INT_WAKEUP (1 << 3) +#define INT_DTIM_NOTIFY (1 << 5) +#define INT_CFG_NEXT_BCN (1 << 6) +#define INT_BUS_ABORT (1 << 7) +#define INT_TX_FIFO_READY (1 << 8) +#define INT_UART (1 << 9) +#define INT_TX_COMPLETE_EN (1 << 16) +#define INT_RX_COMPLETE_EN (1 << 17) +#define INT_RETRY_FAIL_EN (1 << 18) +#define INT_WAKEUP_EN (1 << 19) +#define INT_DTIM_NOTIFY_EN (1 << 21) +#define INT_CFG_NEXT_BCN_EN (1 << 22) +#define INT_BUS_ABORT_EN (1 << 23) +#define INT_TX_FIFO_READY_EN (1 << 24) +#define INT_UART_EN (1 << 25) + +#define CR_TSF_LOW_PART CTL_REG(0x0514) +#define CR_TSF_HIGH_PART CTL_REG(0x0518) + +/* Following three values are in time units (1024us) + * Following condition must be met: + * atim < tbtt < bcn + */ +#define CR_ATIM_WND_PERIOD CTL_REG(0x051C) +#define CR_BCN_INTERVAL CTL_REG(0x0520) +#define CR_PRE_TBTT CTL_REG(0x0524) +/* in units of TU(1024us) */ + +/* for UART support */ +#define CR_UART_RBR_THR_DLL CTL_REG(0x0540) +#define CR_UART_DLM_IER CTL_REG(0x0544) +#define CR_UART_IIR_FCR CTL_REG(0x0548) +#define CR_UART_LCR CTL_REG(0x054c) +#define CR_UART_MCR CTL_REG(0x0550) +#define CR_UART_LSR CTL_REG(0x0554) +#define CR_UART_MSR CTL_REG(0x0558) +#define CR_UART_ECR CTL_REG(0x055c) +#define CR_UART_STATUS CTL_REG(0x0560) + +#define CR_PCI_TX_ADDR_P1 CTL_REG(0x0600) +#define CR_PCI_TX_AddR_P2 CTL_REG(0x0604) +#define CR_PCI_RX_AddR_P1 CTL_REG(0x0608) +#define CR_PCI_RX_AddR_P2 CTL_REG(0x060C) + +/* must be overwritten if custom MAC address will be used */ +#define CR_MAC_ADDR_P1 CTL_REG(0x0610) +#define CR_MAC_ADDR_P2 CTL_REG(0x0614) +#define CR_BSSID_P1 CTL_REG(0x0618) +#define CR_BSSID_P2 CTL_REG(0x061C) +#define CR_BCN_PLCP_CFG CTL_REG(0x0620) + +/* Group hash table for filtering incoming packets. + * + * The group hash table is 64 bit large and split over two parts. The first + * part is the lower part. The upper 6 bits of the last byte of the target + * address are used as index. Packets are received if the hash table bit is + * set. This is used for multicast handling, but for broadcasts (address + * ff:ff:ff:ff:ff:ff) the highest bit in the second table must also be set. + */ +#define CR_GROUP_HASH_P1 CTL_REG(0x0624) +#define CR_GROUP_HASH_P2 CTL_REG(0x0628) + +#define CR_RX_TIMEOUT CTL_REG(0x062C) + +/* Basic rates supported by the BSS. When producing ACK or CTS messages, the + * device will use a rate in this table that is less than or equal to the rate + * of the incoming frame which prompted the response. */ +#define CR_BASIC_RATE_TBL CTL_REG(0x0630) +#define CR_RATE_1M (1 << 0) /* 802.11b */ +#define CR_RATE_2M (1 << 1) /* 802.11b */ +#define CR_RATE_5_5M (1 << 2) /* 802.11b */ +#define CR_RATE_11M (1 << 3) /* 802.11b */ +#define CR_RATE_6M (1 << 8) /* 802.11g */ +#define CR_RATE_9M (1 << 9) /* 802.11g */ +#define CR_RATE_12M (1 << 10) /* 802.11g */ +#define CR_RATE_18M (1 << 11) /* 802.11g */ +#define CR_RATE_24M (1 << 12) /* 802.11g */ +#define CR_RATE_36M (1 << 13) /* 802.11g */ +#define CR_RATE_48M (1 << 14) /* 802.11g */ +#define CR_RATE_54M (1 << 15) /* 802.11g */ +#define CR_RATES_80211G 0xff00 +#define CR_RATES_80211B 0x000f + +/* Mandatory rates required in the BSS. When producing ACK or CTS messages, if + * the device could not find an appropriate rate in CR_BASIC_RATE_TBL, it will + * look for a rate in this table that is less than or equal to the rate of + * the incoming frame. */ +#define CR_MANDATORY_RATE_TBL CTL_REG(0x0634) +#define CR_RTS_CTS_RATE CTL_REG(0x0638) + +/* These are all bit indexes in CR_RTS_CTS_RATE, so remember to shift. */ +#define RTSCTS_SH_RTS_RATE 0 +#define RTSCTS_SH_EXP_CTS_RATE 4 +#define RTSCTS_SH_RTS_MOD_TYPE 8 +#define RTSCTS_SH_RTS_PMB_TYPE 9 +#define RTSCTS_SH_CTS_RATE 16 +#define RTSCTS_SH_CTS_MOD_TYPE 24 +#define RTSCTS_SH_CTS_PMB_TYPE 25 + +#define CR_WEP_PROTECT CTL_REG(0x063C) +#define CR_RX_THRESHOLD CTL_REG(0x0640) + +/* register for controlling the LEDS */ +#define CR_LED CTL_REG(0x0644) +/* masks for controlling LEDs */ +#define LED1 (1 << 8) +#define LED2 (1 << 9) +#define LED_SW (1 << 10) + +/* Seems to indicate that the configuration is over. + */ +#define CR_AFTER_PNP CTL_REG(0x0648) +#define CR_ACK_TIME_80211 CTL_REG(0x0658) + +#define CR_RX_OFFSET CTL_REG(0x065c) + +#define CR_BCN_LENGTH CTL_REG(0x0664) +#define CR_PHY_DELAY CTL_REG(0x066C) +#define CR_BCN_FIFO CTL_REG(0x0670) +#define CR_SNIFFER_ON CTL_REG(0x0674) + +#define CR_ENCRYPTION_TYPE CTL_REG(0x0678) +#define NO_WEP 0 +#define WEP64 1 +#define WEP128 5 +#define WEP256 6 +#define ENC_SNIFFER 8 + +#define CR_ZD1211_RETRY_MAX CTL_REG(0x067C) + +#define CR_REG1 CTL_REG(0x0680) +/* Setting the bit UNLOCK_PHY_REGS disallows the write access to physical + * registers, so one could argue it is a LOCK bit. But calling it + * LOCK_PHY_REGS makes it confusing. + */ +#define UNLOCK_PHY_REGS (1 << 7) + +#define CR_DEVICE_STATE CTL_REG(0x0684) +#define CR_UNDERRUN_CNT CTL_REG(0x0688) + +#define CR_RX_FILTER CTL_REG(0x068c) +#define RX_FILTER_ASSOC_REQUEST (1 << 0) +#define RX_FILTER_ASSOC_RESPONSE (1 << 1) +#define RX_FILTER_REASSOC_REQUEST (1 << 2) +#define RX_FILTER_REASSOC_RESPONSE (1 << 3) +#define RX_FILTER_PROBE_REQUEST (1 << 4) +#define RX_FILTER_PROBE_RESPONSE (1 << 5) +/* bits 6 and 7 reserved */ +#define RX_FILTER_BEACON (1 << 8) +#define RX_FILTER_ATIM (1 << 9) +#define RX_FILTER_DISASSOC (1 << 10) +#define RX_FILTER_AUTH (1 << 11) +#define RX_FILTER_DEAUTH (1 << 12) +#define RX_FILTER_PSPOLL (1 << 26) +#define RX_FILTER_RTS (1 << 27) +#define RX_FILTER_CTS (1 << 28) +#define RX_FILTER_ACK (1 << 29) +#define RX_FILTER_CFEND (1 << 30) +#define RX_FILTER_CFACK (1 << 31) + +/* Enable bits for all frames you are interested in. */ +#define STA_RX_FILTER (RX_FILTER_ASSOC_REQUEST | RX_FILTER_ASSOC_RESPONSE | \ + RX_FILTER_REASSOC_REQUEST | RX_FILTER_REASSOC_RESPONSE | \ + RX_FILTER_PROBE_REQUEST | RX_FILTER_PROBE_RESPONSE | \ + (0x3 << 6) /* vendor driver sets these reserved bits */ | \ + RX_FILTER_BEACON | RX_FILTER_ATIM | RX_FILTER_DISASSOC | \ + RX_FILTER_AUTH | RX_FILTER_DEAUTH | \ + (0x7 << 13) /* vendor driver sets these reserved bits */ | \ + RX_FILTER_PSPOLL | RX_FILTER_ACK) /* 0x2400ffff */ + +#define RX_FILTER_CTRL (RX_FILTER_RTS | RX_FILTER_CTS | \ + RX_FILTER_CFEND | RX_FILTER_CFACK) + +#define BCN_MODE_AP 0x1000000 +#define BCN_MODE_IBSS 0x2000000 + +/* Monitor mode sets filter to 0xfffff */ + +#define CR_ACK_TIMEOUT_EXT CTL_REG(0x0690) +#define CR_BCN_FIFO_SEMAPHORE CTL_REG(0x0694) + +#define CR_IFS_VALUE CTL_REG(0x0698) +#define IFS_VALUE_DIFS_SH 0 +#define IFS_VALUE_EIFS_SH 12 +#define IFS_VALUE_SIFS_SH 24 +#define IFS_VALUE_DEFAULT (( 50 << IFS_VALUE_DIFS_SH) | \ + (1148 << IFS_VALUE_EIFS_SH) | \ + ( 10 << IFS_VALUE_SIFS_SH)) + +#define CR_RX_TIME_OUT CTL_REG(0x069C) +#define CR_TOTAL_RX_FRM CTL_REG(0x06A0) +#define CR_CRC32_CNT CTL_REG(0x06A4) +#define CR_CRC16_CNT CTL_REG(0x06A8) +#define CR_DECRYPTION_ERR_UNI CTL_REG(0x06AC) +#define CR_RX_FIFO_OVERRUN CTL_REG(0x06B0) + +#define CR_DECRYPTION_ERR_MUL CTL_REG(0x06BC) + +#define CR_NAV_CNT CTL_REG(0x06C4) +#define CR_NAV_CCA CTL_REG(0x06C8) +#define CR_RETRY_CNT CTL_REG(0x06CC) + +#define CR_READ_TCB_ADDR CTL_REG(0x06E8) +#define CR_READ_RFD_ADDR CTL_REG(0x06EC) +#define CR_CWMIN_CWMAX CTL_REG(0x06F0) +#define CR_TOTAL_TX_FRM CTL_REG(0x06F4) + +/* CAM: Continuous Access Mode (power management) */ +#define CR_CAM_MODE CTL_REG(0x0700) +#define MODE_IBSS 0x0 +#define MODE_AP 0x1 +#define MODE_STA 0x2 +#define MODE_AP_WDS 0x3 + +#define CR_CAM_ROLL_TB_LOW CTL_REG(0x0704) +#define CR_CAM_ROLL_TB_HIGH CTL_REG(0x0708) +#define CR_CAM_ADDRESS CTL_REG(0x070C) +#define CR_CAM_DATA CTL_REG(0x0710) + +#define CR_ROMDIR CTL_REG(0x0714) + +#define CR_DECRY_ERR_FLG_LOW CTL_REG(0x0714) +#define CR_DECRY_ERR_FLG_HIGH CTL_REG(0x0718) + +#define CR_WEPKEY0 CTL_REG(0x0720) +#define CR_WEPKEY1 CTL_REG(0x0724) +#define CR_WEPKEY2 CTL_REG(0x0728) +#define CR_WEPKEY3 CTL_REG(0x072C) +#define CR_WEPKEY4 CTL_REG(0x0730) +#define CR_WEPKEY5 CTL_REG(0x0734) +#define CR_WEPKEY6 CTL_REG(0x0738) +#define CR_WEPKEY7 CTL_REG(0x073C) +#define CR_WEPKEY8 CTL_REG(0x0740) +#define CR_WEPKEY9 CTL_REG(0x0744) +#define CR_WEPKEY10 CTL_REG(0x0748) +#define CR_WEPKEY11 CTL_REG(0x074C) +#define CR_WEPKEY12 CTL_REG(0x0750) +#define CR_WEPKEY13 CTL_REG(0x0754) +#define CR_WEPKEY14 CTL_REG(0x0758) +#define CR_WEPKEY15 CTL_REG(0x075c) +#define CR_TKIP_MODE CTL_REG(0x0760) + +#define CR_EEPROM_PROTECT0 CTL_REG(0x0758) +#define CR_EEPROM_PROTECT1 CTL_REG(0x075C) + +#define CR_DBG_FIFO_RD CTL_REG(0x0800) +#define CR_DBG_SELECT CTL_REG(0x0804) +#define CR_FIFO_Length CTL_REG(0x0808) + + +#define CR_RSSI_MGC CTL_REG(0x0810) + +#define CR_PON CTL_REG(0x0818) +#define CR_RX_ON CTL_REG(0x081C) +#define CR_TX_ON CTL_REG(0x0820) +#define CR_CHIP_EN CTL_REG(0x0824) +#define CR_LO_SW CTL_REG(0x0828) +#define CR_TXRX_SW CTL_REG(0x082C) +#define CR_S_MD CTL_REG(0x0830) + +#define CR_USB_DEBUG_PORT CTL_REG(0x0888) +#define CR_ZD1211B_CWIN_MAX_MIN_AC0 CTL_REG(0x0b00) +#define CR_ZD1211B_CWIN_MAX_MIN_AC1 CTL_REG(0x0b04) +#define CR_ZD1211B_CWIN_MAX_MIN_AC2 CTL_REG(0x0b08) +#define CR_ZD1211B_CWIN_MAX_MIN_AC3 CTL_REG(0x0b0c) +#define CR_ZD1211B_AIFS_CTL1 CTL_REG(0x0b10) +#define CR_ZD1211B_AIFS_CTL2 CTL_REG(0x0b14) +#define CR_ZD1211B_TXOP CTL_REG(0x0b20) +#define CR_ZD1211B_RETRY_MAX CTL_REG(0x0b28) + +/* Value for CR_ZD1211_RETRY_MAX & CR_ZD1211B_RETRY_MAX. Vendor driver uses 2, + * we use 0. The first rate is tried (count+2), then all next rates are tried + * twice, until 1 Mbits is tried. */ +#define ZD1211_RETRY_COUNT 0 +#define ZD1211B_RETRY_COUNT \ + (ZD1211_RETRY_COUNT << 0)| \ + (ZD1211_RETRY_COUNT << 8)| \ + (ZD1211_RETRY_COUNT << 16)| \ + (ZD1211_RETRY_COUNT << 24) + +/* Used to detect PLL lock */ +#define UW2453_INTR_REG ((zd_addr_t)0x85c1) + +#define CWIN_SIZE 0x007f043f + + +#define HWINT_ENABLED \ + (INT_TX_COMPLETE_EN| \ + INT_RX_COMPLETE_EN| \ + INT_RETRY_FAIL_EN| \ + INT_WAKEUP_EN| \ + INT_CFG_NEXT_BCN_EN) + +#define HWINT_DISABLED 0 + +#define E2P_PWR_INT_GUARD 8 +#define E2P_CHANNEL_COUNT 14 + +/* If you compare this addresses with the ZYDAS orignal driver, please notify + * that we use word mapping for the EEPROM. + */ + +/* + * Upper 16 bit contains the regulatory domain. + */ +#define E2P_SUBID E2P_DATA(0x00) +#define E2P_POD E2P_DATA(0x02) +#define E2P_MAC_ADDR_P1 E2P_DATA(0x04) +#define E2P_MAC_ADDR_P2 E2P_DATA(0x06) +#define E2P_PWR_CAL_VALUE1 E2P_DATA(0x08) +#define E2P_PWR_CAL_VALUE2 E2P_DATA(0x0a) +#define E2P_PWR_CAL_VALUE3 E2P_DATA(0x0c) +#define E2P_PWR_CAL_VALUE4 E2P_DATA(0x0e) +#define E2P_PWR_INT_VALUE1 E2P_DATA(0x10) +#define E2P_PWR_INT_VALUE2 E2P_DATA(0x12) +#define E2P_PWR_INT_VALUE3 E2P_DATA(0x14) +#define E2P_PWR_INT_VALUE4 E2P_DATA(0x16) + +/* Contains a bit for each allowed channel. It gives for Europe (ETSI 0x30) + * also only 11 channels. */ +#define E2P_ALLOWED_CHANNEL E2P_DATA(0x18) + +#define E2P_DEVICE_VER E2P_DATA(0x20) +#define E2P_PHY_REG E2P_DATA(0x25) +#define E2P_36M_CAL_VALUE1 E2P_DATA(0x28) +#define E2P_36M_CAL_VALUE2 E2P_DATA(0x2a) +#define E2P_36M_CAL_VALUE3 E2P_DATA(0x2c) +#define E2P_36M_CAL_VALUE4 E2P_DATA(0x2e) +#define E2P_11A_INT_VALUE1 E2P_DATA(0x30) +#define E2P_11A_INT_VALUE2 E2P_DATA(0x32) +#define E2P_11A_INT_VALUE3 E2P_DATA(0x34) +#define E2P_11A_INT_VALUE4 E2P_DATA(0x36) +#define E2P_48M_CAL_VALUE1 E2P_DATA(0x38) +#define E2P_48M_CAL_VALUE2 E2P_DATA(0x3a) +#define E2P_48M_CAL_VALUE3 E2P_DATA(0x3c) +#define E2P_48M_CAL_VALUE4 E2P_DATA(0x3e) +#define E2P_48M_INT_VALUE1 E2P_DATA(0x40) +#define E2P_48M_INT_VALUE2 E2P_DATA(0x42) +#define E2P_48M_INT_VALUE3 E2P_DATA(0x44) +#define E2P_48M_INT_VALUE4 E2P_DATA(0x46) +#define E2P_54M_CAL_VALUE1 E2P_DATA(0x48) /* ??? */ +#define E2P_54M_CAL_VALUE2 E2P_DATA(0x4a) +#define E2P_54M_CAL_VALUE3 E2P_DATA(0x4c) +#define E2P_54M_CAL_VALUE4 E2P_DATA(0x4e) +#define E2P_54M_INT_VALUE1 E2P_DATA(0x50) +#define E2P_54M_INT_VALUE2 E2P_DATA(0x52) +#define E2P_54M_INT_VALUE3 E2P_DATA(0x54) +#define E2P_54M_INT_VALUE4 E2P_DATA(0x56) + +/* This word contains the base address of the FW_REG_ registers below */ +#define FWRAW_REGS_ADDR FWRAW_DATA(0x1d) + +/* All 16 bit values, offset from the address in FWRAW_REGS_ADDR */ +enum { + FW_REG_FIRMWARE_VER = 0, + /* non-zero if USB high speed connection */ + FW_REG_USB_SPEED = 1, + FW_REG_FIX_TX_RATE = 2, + /* Seems to be able to control LEDs over the firmware */ + FW_REG_LED_LINK_STATUS = 3, + FW_REG_SOFT_RESET = 4, + FW_REG_FLASH_CHK = 5, +}; + +/* Values for FW_LINK_STATUS */ +#define FW_LINK_OFF 0x0 +#define FW_LINK_TX 0x1 +/* 0x2 - link led on? */ + +enum { + /* indices for ofdm_cal_values */ + OFDM_36M_INDEX = 0, + OFDM_48M_INDEX = 1, + OFDM_54M_INDEX = 2, +}; + +struct zd_chip { + struct zd_usb usb; + struct zd_rf rf; + struct mutex mutex; + /* Base address of FW_REG_ registers */ + zd_addr_t fw_regs_base; + /* EepSetPoint in the vendor driver */ + u8 pwr_cal_values[E2P_CHANNEL_COUNT]; + /* integration values in the vendor driver */ + u8 pwr_int_values[E2P_CHANNEL_COUNT]; + /* SetPointOFDM in the vendor driver */ + u8 ofdm_cal_values[3][E2P_CHANNEL_COUNT]; + u16 link_led; + unsigned int pa_type:4, + patch_cck_gain:1, patch_cr157:1, patch_6m_band_edge:1, + new_phy_layout:1, al2230s_bit:1, + supports_tx_led:1; +}; + +static inline struct zd_chip *zd_usb_to_chip(struct zd_usb *usb) +{ + return container_of(usb, struct zd_chip, usb); +} + +static inline struct zd_chip *zd_rf_to_chip(struct zd_rf *rf) +{ + return container_of(rf, struct zd_chip, rf); +} + +#define zd_chip_dev(chip) (&(chip)->usb.intf->dev) + +void zd_chip_init(struct zd_chip *chip, + struct ieee80211_hw *hw, + struct usb_interface *intf); +void zd_chip_clear(struct zd_chip *chip); +int zd_chip_read_mac_addr_fw(struct zd_chip *chip, u8 *addr); +int zd_chip_init_hw(struct zd_chip *chip); +int zd_chip_reset(struct zd_chip *chip); + +static inline int zd_chip_is_zd1211b(struct zd_chip *chip) +{ + return chip->usb.is_zd1211b; +} + +static inline int zd_ioread16v_locked(struct zd_chip *chip, u16 *values, + const zd_addr_t *addresses, + unsigned int count) +{ + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + return zd_usb_ioread16v(&chip->usb, values, addresses, count); +} + +static inline int zd_ioread16_locked(struct zd_chip *chip, u16 *value, + const zd_addr_t addr) +{ + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + return zd_usb_ioread16(&chip->usb, value, addr); +} + +int zd_ioread32v_locked(struct zd_chip *chip, u32 *values, + const zd_addr_t *addresses, unsigned int count); + +static inline int zd_ioread32_locked(struct zd_chip *chip, u32 *value, + const zd_addr_t addr) +{ + return zd_ioread32v_locked(chip, value, &addr, 1); +} + +static inline int zd_iowrite16_locked(struct zd_chip *chip, u16 value, + zd_addr_t addr) +{ + struct zd_ioreq16 ioreq; + + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + ioreq.addr = addr; + ioreq.value = value; + + return zd_usb_iowrite16v(&chip->usb, &ioreq, 1); +} + +int zd_iowrite16a_locked(struct zd_chip *chip, + const struct zd_ioreq16 *ioreqs, unsigned int count); + +int _zd_iowrite32v_locked(struct zd_chip *chip, const struct zd_ioreq32 *ioreqs, + unsigned int count); + +static inline int zd_iowrite32_locked(struct zd_chip *chip, u32 value, + zd_addr_t addr) +{ + struct zd_ioreq32 ioreq; + + ioreq.addr = addr; + ioreq.value = value; + + return _zd_iowrite32v_locked(chip, &ioreq, 1); +} + +int zd_iowrite32a_locked(struct zd_chip *chip, + const struct zd_ioreq32 *ioreqs, unsigned int count); + +static inline int zd_rfwrite_locked(struct zd_chip *chip, u32 value, u8 bits) +{ + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + return zd_usb_rfwrite(&chip->usb, value, bits); +} + +int zd_rfwrite_cr_locked(struct zd_chip *chip, u32 value); + +int zd_rfwritev_locked(struct zd_chip *chip, + const u32* values, unsigned int count, u8 bits); +int zd_rfwritev_cr_locked(struct zd_chip *chip, + const u32* values, unsigned int count); + +/* Locking functions for reading and writing registers. + * The different parameters are intentional. + */ +int zd_ioread16(struct zd_chip *chip, zd_addr_t addr, u16 *value); +int zd_iowrite16(struct zd_chip *chip, zd_addr_t addr, u16 value); +int zd_ioread32(struct zd_chip *chip, zd_addr_t addr, u32 *value); +int zd_iowrite32(struct zd_chip *chip, zd_addr_t addr, u32 value); +int zd_ioread32v(struct zd_chip *chip, const zd_addr_t *addresses, + u32 *values, unsigned int count); +int zd_iowrite32a(struct zd_chip *chip, const struct zd_ioreq32 *ioreqs, + unsigned int count); + +int zd_chip_set_channel(struct zd_chip *chip, u8 channel); +static inline u8 _zd_chip_get_channel(struct zd_chip *chip) +{ + return chip->rf.channel; +} +u8 zd_chip_get_channel(struct zd_chip *chip); +int zd_read_regdomain(struct zd_chip *chip, u8 *regdomain); +int zd_write_mac_addr(struct zd_chip *chip, const u8 *mac_addr); +int zd_write_bssid(struct zd_chip *chip, const u8 *bssid); +int zd_chip_switch_radio_on(struct zd_chip *chip); +int zd_chip_switch_radio_off(struct zd_chip *chip); +int zd_chip_enable_int(struct zd_chip *chip); +void zd_chip_disable_int(struct zd_chip *chip); +int zd_chip_enable_rxtx(struct zd_chip *chip); +void zd_chip_disable_rxtx(struct zd_chip *chip); +int zd_chip_enable_hwint(struct zd_chip *chip); +int zd_chip_disable_hwint(struct zd_chip *chip); +int zd_chip_generic_patch_6m_band(struct zd_chip *chip, int channel); +int zd_chip_set_rts_cts_rate_locked(struct zd_chip *chip, int preamble); + +static inline int zd_get_encryption_type(struct zd_chip *chip, u32 *type) +{ + return zd_ioread32(chip, CR_ENCRYPTION_TYPE, type); +} + +static inline int zd_set_encryption_type(struct zd_chip *chip, u32 type) +{ + return zd_iowrite32(chip, CR_ENCRYPTION_TYPE, type); +} + +static inline int zd_chip_get_basic_rates(struct zd_chip *chip, u16 *cr_rates) +{ + return zd_ioread16(chip, CR_BASIC_RATE_TBL, cr_rates); +} + +int zd_chip_set_basic_rates(struct zd_chip *chip, u16 cr_rates); + +int zd_chip_lock_phy_regs(struct zd_chip *chip); +int zd_chip_unlock_phy_regs(struct zd_chip *chip); + +enum led_status { + ZD_LED_OFF = 0, + ZD_LED_SCANNING = 1, + ZD_LED_ASSOCIATED = 2, +}; + +int zd_chip_control_leds(struct zd_chip *chip, enum led_status status); + +int zd_set_beacon_interval(struct zd_chip *chip, u16 interval, u8 dtim_period, + int type); + +static inline int zd_get_beacon_interval(struct zd_chip *chip, u32 *interval) +{ + return zd_ioread32(chip, CR_BCN_INTERVAL, interval); +} + +struct rx_status; + +u8 zd_rx_rate(const void *rx_frame, const struct rx_status *status); + +struct zd_mc_hash { + u32 low; + u32 high; +}; + +static inline void zd_mc_clear(struct zd_mc_hash *hash) +{ + hash->low = 0; + /* The interfaces must always received broadcasts. + * The hash of the broadcast address ff:ff:ff:ff:ff:ff is 63. + */ + hash->high = 0x80000000; +} + +static inline void zd_mc_add_all(struct zd_mc_hash *hash) +{ + hash->low = hash->high = 0xffffffff; +} + +static inline void zd_mc_add_addr(struct zd_mc_hash *hash, u8 *addr) +{ + unsigned int i = addr[5] >> 2; + if (i < 32) { + hash->low |= 1 << i; + } else { + hash->high |= 1 << (i-32); + } +} + +int zd_chip_set_multicast_hash(struct zd_chip *chip, + struct zd_mc_hash *hash); + +u64 zd_chip_get_tsf(struct zd_chip *chip); + +#endif /* _ZD_CHIP_H */ diff --git a/drivers/net/wireless/zydas/zd1211rw/zd_def.h b/drivers/net/wireless/zydas/zd1211rw/zd_def.h new file mode 100644 index 000000000..8ca2d0aab --- /dev/null +++ b/drivers/net/wireless/zydas/zd1211rw/zd_def.h @@ -0,0 +1,57 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* ZD1211 USB-WLAN driver for Linux + * + * Copyright (C) 2005-2007 Ulrich Kunitz <kune@deine-taler.de> + * Copyright (C) 2006-2007 Daniel Drake <dsd@gentoo.org> + */ + +#ifndef _ZD_DEF_H +#define _ZD_DEF_H + +#include <linux/kernel.h> +#include <linux/stringify.h> +#include <linux/device.h> + +typedef u16 __nocast zd_addr_t; + +#define dev_printk_f(level, dev, fmt, args...) \ + dev_printk(level, dev, "%s() " fmt, __func__, ##args) + +#ifdef DEBUG +# define dev_dbg_f(dev, fmt, args...) \ + dev_printk_f(KERN_DEBUG, dev, fmt, ## args) +# define dev_dbg_f_limit(dev, fmt, args...) do { \ + if (net_ratelimit()) \ + dev_printk_f(KERN_DEBUG, dev, fmt, ## args); \ +} while (0) +# define dev_dbg_f_cond(dev, cond, fmt, args...) ({ \ + bool __cond = !!(cond); \ + if (unlikely(__cond)) \ + dev_printk_f(KERN_DEBUG, dev, fmt, ## args); \ +}) +#else +# define dev_dbg_f(dev, fmt, args...) do { (void)(dev); } while (0) +# define dev_dbg_f_limit(dev, fmt, args...) do { (void)(dev); } while (0) +# define dev_dbg_f_cond(dev, cond, fmt, args...) do { (void)(dev); } while (0) +#endif /* DEBUG */ + +#ifdef DEBUG +# define ZD_ASSERT(x) \ +do { \ + if (unlikely(!(x))) { \ + pr_debug("%s:%d ASSERT %s VIOLATED!\n", \ + __FILE__, __LINE__, __stringify(x)); \ + dump_stack(); \ + } \ +} while (0) +#else +# define ZD_ASSERT(x) do { } while (0) +#endif + +#ifdef DEBUG +# define ZD_MEMCLEAR(pointer, size) memset((pointer), 0xff, (size)) +#else +# define ZD_MEMCLEAR(pointer, size) do { } while (0) +#endif + +#endif /* _ZD_DEF_H */ diff --git a/drivers/net/wireless/zydas/zd1211rw/zd_mac.c b/drivers/net/wireless/zydas/zd1211rw/zd_mac.c new file mode 100644 index 000000000..3ef853320 --- /dev/null +++ b/drivers/net/wireless/zydas/zd1211rw/zd_mac.c @@ -0,0 +1,1537 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* ZD1211 USB-WLAN driver for Linux + * + * Copyright (C) 2005-2007 Ulrich Kunitz <kune@deine-taler.de> + * Copyright (C) 2006-2007 Daniel Drake <dsd@gentoo.org> + * Copyright (C) 2006-2007 Michael Wu <flamingice@sourmilk.net> + * Copyright (C) 2007-2008 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> + */ + +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/slab.h> +#include <linux/usb.h> +#include <linux/jiffies.h> +#include <net/ieee80211_radiotap.h> + +#include "zd_def.h" +#include "zd_chip.h" +#include "zd_mac.h" +#include "zd_rf.h" + +struct zd_reg_alpha2_map { + u32 reg; + char alpha2[2]; +}; + +static struct zd_reg_alpha2_map reg_alpha2_map[] = { + { ZD_REGDOMAIN_FCC, "US" }, + { ZD_REGDOMAIN_IC, "CA" }, + { ZD_REGDOMAIN_ETSI, "DE" }, /* Generic ETSI, use most restrictive */ + { ZD_REGDOMAIN_JAPAN, "JP" }, + { ZD_REGDOMAIN_JAPAN_2, "JP" }, + { ZD_REGDOMAIN_JAPAN_3, "JP" }, + { ZD_REGDOMAIN_SPAIN, "ES" }, + { ZD_REGDOMAIN_FRANCE, "FR" }, +}; + +/* This table contains the hardware specific values for the modulation rates. */ +static const struct ieee80211_rate zd_rates[] = { + { .bitrate = 10, + .hw_value = ZD_CCK_RATE_1M, }, + { .bitrate = 20, + .hw_value = ZD_CCK_RATE_2M, + .hw_value_short = ZD_CCK_RATE_2M | ZD_CCK_PREA_SHORT, + .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 55, + .hw_value = ZD_CCK_RATE_5_5M, + .hw_value_short = ZD_CCK_RATE_5_5M | ZD_CCK_PREA_SHORT, + .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 110, + .hw_value = ZD_CCK_RATE_11M, + .hw_value_short = ZD_CCK_RATE_11M | ZD_CCK_PREA_SHORT, + .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 60, + .hw_value = ZD_OFDM_RATE_6M, + .flags = 0 }, + { .bitrate = 90, + .hw_value = ZD_OFDM_RATE_9M, + .flags = 0 }, + { .bitrate = 120, + .hw_value = ZD_OFDM_RATE_12M, + .flags = 0 }, + { .bitrate = 180, + .hw_value = ZD_OFDM_RATE_18M, + .flags = 0 }, + { .bitrate = 240, + .hw_value = ZD_OFDM_RATE_24M, + .flags = 0 }, + { .bitrate = 360, + .hw_value = ZD_OFDM_RATE_36M, + .flags = 0 }, + { .bitrate = 480, + .hw_value = ZD_OFDM_RATE_48M, + .flags = 0 }, + { .bitrate = 540, + .hw_value = ZD_OFDM_RATE_54M, + .flags = 0 }, +}; + +/* + * Zydas retry rates table. Each line is listed in the same order as + * in zd_rates[] and contains all the rate used when a packet is sent + * starting with a given rates. Let's consider an example : + * + * "11 Mbits : 4, 3, 2, 1, 0" means : + * - packet is sent using 4 different rates + * - 1st rate is index 3 (ie 11 Mbits) + * - 2nd rate is index 2 (ie 5.5 Mbits) + * - 3rd rate is index 1 (ie 2 Mbits) + * - 4th rate is index 0 (ie 1 Mbits) + */ + +static const struct tx_retry_rate zd_retry_rates[] = { + { /* 1 Mbits */ 1, { 0 }}, + { /* 2 Mbits */ 2, { 1, 0 }}, + { /* 5.5 Mbits */ 3, { 2, 1, 0 }}, + { /* 11 Mbits */ 4, { 3, 2, 1, 0 }}, + { /* 6 Mbits */ 5, { 4, 3, 2, 1, 0 }}, + { /* 9 Mbits */ 6, { 5, 4, 3, 2, 1, 0}}, + { /* 12 Mbits */ 5, { 6, 3, 2, 1, 0 }}, + { /* 18 Mbits */ 6, { 7, 6, 3, 2, 1, 0 }}, + { /* 24 Mbits */ 6, { 8, 6, 3, 2, 1, 0 }}, + { /* 36 Mbits */ 7, { 9, 8, 6, 3, 2, 1, 0 }}, + { /* 48 Mbits */ 8, {10, 9, 8, 6, 3, 2, 1, 0 }}, + { /* 54 Mbits */ 9, {11, 10, 9, 8, 6, 3, 2, 1, 0 }} +}; + +static const struct ieee80211_channel zd_channels[] = { + { .center_freq = 2412, .hw_value = 1 }, + { .center_freq = 2417, .hw_value = 2 }, + { .center_freq = 2422, .hw_value = 3 }, + { .center_freq = 2427, .hw_value = 4 }, + { .center_freq = 2432, .hw_value = 5 }, + { .center_freq = 2437, .hw_value = 6 }, + { .center_freq = 2442, .hw_value = 7 }, + { .center_freq = 2447, .hw_value = 8 }, + { .center_freq = 2452, .hw_value = 9 }, + { .center_freq = 2457, .hw_value = 10 }, + { .center_freq = 2462, .hw_value = 11 }, + { .center_freq = 2467, .hw_value = 12 }, + { .center_freq = 2472, .hw_value = 13 }, + { .center_freq = 2484, .hw_value = 14 }, +}; + +static void housekeeping_init(struct zd_mac *mac); +static void housekeeping_enable(struct zd_mac *mac); +static void housekeeping_disable(struct zd_mac *mac); +static void beacon_init(struct zd_mac *mac); +static void beacon_enable(struct zd_mac *mac); +static void beacon_disable(struct zd_mac *mac); +static void set_rts_cts(struct zd_mac *mac, unsigned int short_preamble); +static int zd_mac_config_beacon(struct ieee80211_hw *hw, + struct sk_buff *beacon, bool in_intr); + +static int zd_reg2alpha2(u8 regdomain, char *alpha2) +{ + unsigned int i; + struct zd_reg_alpha2_map *reg_map; + for (i = 0; i < ARRAY_SIZE(reg_alpha2_map); i++) { + reg_map = ®_alpha2_map[i]; + if (regdomain == reg_map->reg) { + alpha2[0] = reg_map->alpha2[0]; + alpha2[1] = reg_map->alpha2[1]; + return 0; + } + } + return 1; +} + +static int zd_check_signal(struct ieee80211_hw *hw, int signal) +{ + struct zd_mac *mac = zd_hw_mac(hw); + + dev_dbg_f_cond(zd_mac_dev(mac), signal < 0 || signal > 100, + "%s: signal value from device not in range 0..100, " + "but %d.\n", __func__, signal); + + if (signal < 0) + signal = 0; + else if (signal > 100) + signal = 100; + + return signal; +} + +int zd_mac_preinit_hw(struct ieee80211_hw *hw) +{ + int r; + u8 addr[ETH_ALEN]; + struct zd_mac *mac = zd_hw_mac(hw); + + r = zd_chip_read_mac_addr_fw(&mac->chip, addr); + if (r) + return r; + + SET_IEEE80211_PERM_ADDR(hw, addr); + + return 0; +} + +int zd_mac_init_hw(struct ieee80211_hw *hw) +{ + int r; + struct zd_mac *mac = zd_hw_mac(hw); + struct zd_chip *chip = &mac->chip; + char alpha2[2]; + u8 default_regdomain; + + r = zd_chip_enable_int(chip); + if (r) + goto out; + r = zd_chip_init_hw(chip); + if (r) + goto disable_int; + + ZD_ASSERT(!irqs_disabled()); + + r = zd_read_regdomain(chip, &default_regdomain); + if (r) + goto disable_int; + spin_lock_irq(&mac->lock); + mac->regdomain = mac->default_regdomain = default_regdomain; + spin_unlock_irq(&mac->lock); + + /* We must inform the device that we are doing encryption/decryption in + * software at the moment. */ + r = zd_set_encryption_type(chip, ENC_SNIFFER); + if (r) + goto disable_int; + + r = zd_reg2alpha2(mac->regdomain, alpha2); + if (r) + goto disable_int; + + r = regulatory_hint(hw->wiphy, alpha2); +disable_int: + zd_chip_disable_int(chip); +out: + return r; +} + +void zd_mac_clear(struct zd_mac *mac) +{ + flush_workqueue(zd_workqueue); + zd_chip_clear(&mac->chip); + ZD_MEMCLEAR(mac, sizeof(struct zd_mac)); +} + +static int set_rx_filter(struct zd_mac *mac) +{ + unsigned long flags; + u32 filter = STA_RX_FILTER; + + spin_lock_irqsave(&mac->lock, flags); + if (mac->pass_ctrl) + filter |= RX_FILTER_CTRL; + spin_unlock_irqrestore(&mac->lock, flags); + + return zd_iowrite32(&mac->chip, CR_RX_FILTER, filter); +} + +static int set_mac_and_bssid(struct zd_mac *mac) +{ + int r; + + if (!mac->vif) + return -1; + + r = zd_write_mac_addr(&mac->chip, mac->vif->addr); + if (r) + return r; + + /* Vendor driver after setting MAC either sets BSSID for AP or + * filter for other modes. + */ + if (mac->type != NL80211_IFTYPE_AP) + return set_rx_filter(mac); + else + return zd_write_bssid(&mac->chip, mac->vif->addr); +} + +static int set_mc_hash(struct zd_mac *mac) +{ + struct zd_mc_hash hash; + zd_mc_clear(&hash); + return zd_chip_set_multicast_hash(&mac->chip, &hash); +} + +int zd_op_start(struct ieee80211_hw *hw) +{ + struct zd_mac *mac = zd_hw_mac(hw); + struct zd_chip *chip = &mac->chip; + struct zd_usb *usb = &chip->usb; + int r; + + if (!usb->initialized) { + r = zd_usb_init_hw(usb); + if (r) + goto out; + } + + r = zd_chip_enable_int(chip); + if (r < 0) + goto out; + + r = zd_chip_set_basic_rates(chip, CR_RATES_80211B | CR_RATES_80211G); + if (r < 0) + goto disable_int; + r = set_rx_filter(mac); + if (r) + goto disable_int; + r = set_mc_hash(mac); + if (r) + goto disable_int; + + /* Wait after setting the multicast hash table and powering on + * the radio otherwise interface bring up will fail. This matches + * what the vendor driver did. + */ + msleep(10); + + r = zd_chip_switch_radio_on(chip); + if (r < 0) { + dev_err(zd_chip_dev(chip), + "%s: failed to set radio on\n", __func__); + goto disable_int; + } + r = zd_chip_enable_rxtx(chip); + if (r < 0) + goto disable_radio; + r = zd_chip_enable_hwint(chip); + if (r < 0) + goto disable_rxtx; + + housekeeping_enable(mac); + beacon_enable(mac); + set_bit(ZD_DEVICE_RUNNING, &mac->flags); + return 0; +disable_rxtx: + zd_chip_disable_rxtx(chip); +disable_radio: + zd_chip_switch_radio_off(chip); +disable_int: + zd_chip_disable_int(chip); +out: + return r; +} + +void zd_op_stop(struct ieee80211_hw *hw) +{ + struct zd_mac *mac = zd_hw_mac(hw); + struct zd_chip *chip = &mac->chip; + struct sk_buff *skb; + struct sk_buff_head *ack_wait_queue = &mac->ack_wait_queue; + + clear_bit(ZD_DEVICE_RUNNING, &mac->flags); + + /* The order here deliberately is a little different from the open() + * method, since we need to make sure there is no opportunity for RX + * frames to be processed by mac80211 after we have stopped it. + */ + + zd_chip_disable_rxtx(chip); + beacon_disable(mac); + housekeeping_disable(mac); + flush_workqueue(zd_workqueue); + + zd_chip_disable_hwint(chip); + zd_chip_switch_radio_off(chip); + zd_chip_disable_int(chip); + + + while ((skb = skb_dequeue(ack_wait_queue))) + dev_kfree_skb_any(skb); +} + +int zd_restore_settings(struct zd_mac *mac) +{ + struct sk_buff *beacon; + struct zd_mc_hash multicast_hash; + unsigned int short_preamble; + int r, beacon_interval, beacon_period; + u8 channel; + + dev_dbg_f(zd_mac_dev(mac), "\n"); + + spin_lock_irq(&mac->lock); + multicast_hash = mac->multicast_hash; + short_preamble = mac->short_preamble; + beacon_interval = mac->beacon.interval; + beacon_period = mac->beacon.period; + channel = mac->channel; + spin_unlock_irq(&mac->lock); + + r = set_mac_and_bssid(mac); + if (r < 0) { + dev_dbg_f(zd_mac_dev(mac), "set_mac_and_bssid failed, %d\n", r); + return r; + } + + r = zd_chip_set_channel(&mac->chip, channel); + if (r < 0) { + dev_dbg_f(zd_mac_dev(mac), "zd_chip_set_channel failed, %d\n", + r); + return r; + } + + set_rts_cts(mac, short_preamble); + + r = zd_chip_set_multicast_hash(&mac->chip, &multicast_hash); + if (r < 0) { + dev_dbg_f(zd_mac_dev(mac), + "zd_chip_set_multicast_hash failed, %d\n", r); + return r; + } + + if (mac->type == NL80211_IFTYPE_MESH_POINT || + mac->type == NL80211_IFTYPE_ADHOC || + mac->type == NL80211_IFTYPE_AP) { + if (mac->vif != NULL) { + beacon = ieee80211_beacon_get(mac->hw, mac->vif); + if (beacon) + zd_mac_config_beacon(mac->hw, beacon, false); + } + + zd_set_beacon_interval(&mac->chip, beacon_interval, + beacon_period, mac->type); + + spin_lock_irq(&mac->lock); + mac->beacon.last_update = jiffies; + spin_unlock_irq(&mac->lock); + } + + return 0; +} + +/** + * zd_mac_tx_status - reports tx status of a packet if required + * @hw: a &struct ieee80211_hw pointer + * @skb: a sk-buffer + * @ackssi: ACK signal strength + * @tx_status: success and/or retry + * + * This information calls ieee80211_tx_status_irqsafe() if required by the + * control information. It copies the control information into the status + * information. + * + * If no status information has been requested, the skb is freed. + */ +static void zd_mac_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb, + int ackssi, struct tx_status *tx_status) +{ + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + int i; + int success = 1, retry = 1; + int first_idx; + const struct tx_retry_rate *retries; + + ieee80211_tx_info_clear_status(info); + + if (tx_status) { + success = !tx_status->failure; + retry = tx_status->retry + success; + } + + if (success) { + /* success */ + info->flags |= IEEE80211_TX_STAT_ACK; + } else { + /* failure */ + info->flags &= ~IEEE80211_TX_STAT_ACK; + } + + first_idx = info->status.rates[0].idx; + ZD_ASSERT(0<=first_idx && first_idx<ARRAY_SIZE(zd_retry_rates)); + retries = &zd_retry_rates[first_idx]; + ZD_ASSERT(1 <= retry && retry <= retries->count); + + info->status.rates[0].idx = retries->rate[0]; + info->status.rates[0].count = 1; // (retry > 1 ? 2 : 1); + + for (i=1; i<IEEE80211_TX_MAX_RATES-1 && i<retry; i++) { + info->status.rates[i].idx = retries->rate[i]; + info->status.rates[i].count = 1; // ((i==retry-1) && success ? 1:2); + } + for (; i<IEEE80211_TX_MAX_RATES && i<retry; i++) { + info->status.rates[i].idx = retries->rate[retry - 1]; + info->status.rates[i].count = 1; // (success ? 1:2); + } + if (i<IEEE80211_TX_MAX_RATES) + info->status.rates[i].idx = -1; /* terminate */ + + info->status.ack_signal = zd_check_signal(hw, ackssi); + ieee80211_tx_status_irqsafe(hw, skb); +} + +/** + * zd_mac_tx_failed - callback for failed frames + * @urb: pointer to the urb structure + * + * This function is called if a frame couldn't be successfully + * transferred. The first frame from the tx queue, will be selected and + * reported as error to the upper layers. + */ +void zd_mac_tx_failed(struct urb *urb) +{ + struct ieee80211_hw * hw = zd_usb_to_hw(urb->context); + struct zd_mac *mac = zd_hw_mac(hw); + struct sk_buff_head *q = &mac->ack_wait_queue; + struct sk_buff *skb; + struct tx_status *tx_status = (struct tx_status *)urb->transfer_buffer; + unsigned long flags; + int success = !tx_status->failure; + int retry = tx_status->retry + success; + int found = 0; + int i, position = 0; + + spin_lock_irqsave(&q->lock, flags); + + skb_queue_walk(q, skb) { + struct ieee80211_hdr *tx_hdr; + struct ieee80211_tx_info *info; + int first_idx, final_idx; + const struct tx_retry_rate *retries; + u8 final_rate; + + position ++; + + /* if the hardware reports a failure and we had a 802.11 ACK + * pending, then we skip the first skb when searching for a + * matching frame */ + if (tx_status->failure && mac->ack_pending && + skb_queue_is_first(q, skb)) { + continue; + } + + tx_hdr = (struct ieee80211_hdr *)skb->data; + + /* we skip all frames not matching the reported destination */ + if (unlikely(!ether_addr_equal(tx_hdr->addr1, tx_status->mac))) + continue; + + /* we skip all frames not matching the reported final rate */ + + info = IEEE80211_SKB_CB(skb); + first_idx = info->status.rates[0].idx; + ZD_ASSERT(0<=first_idx && first_idx<ARRAY_SIZE(zd_retry_rates)); + retries = &zd_retry_rates[first_idx]; + if (retry <= 0 || retry > retries->count) + continue; + + final_idx = retries->rate[retry - 1]; + final_rate = zd_rates[final_idx].hw_value; + + if (final_rate != tx_status->rate) { + continue; + } + + found = 1; + break; + } + + if (found) { + for (i=1; i<=position; i++) { + skb = __skb_dequeue(q); + zd_mac_tx_status(hw, skb, + mac->ack_pending ? mac->ack_signal : 0, + i == position ? tx_status : NULL); + mac->ack_pending = 0; + } + } + + spin_unlock_irqrestore(&q->lock, flags); +} + +/** + * zd_mac_tx_to_dev - callback for USB layer + * @skb: a &sk_buff pointer + * @error: error value, 0 if transmission successful + * + * Informs the MAC layer that the frame has successfully transferred to the + * device. If an ACK is required and the transfer to the device has been + * successful, the packets are put on the @ack_wait_queue with + * the control set removed. + */ +void zd_mac_tx_to_dev(struct sk_buff *skb, int error) +{ + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct ieee80211_hw *hw = info->rate_driver_data[0]; + struct zd_mac *mac = zd_hw_mac(hw); + + ieee80211_tx_info_clear_status(info); + + skb_pull(skb, sizeof(struct zd_ctrlset)); + if (unlikely(error || + (info->flags & IEEE80211_TX_CTL_NO_ACK))) { + /* + * FIXME : do we need to fill in anything ? + */ + ieee80211_tx_status_irqsafe(hw, skb); + } else { + struct sk_buff_head *q = &mac->ack_wait_queue; + + skb_queue_tail(q, skb); + while (skb_queue_len(q) > ZD_MAC_MAX_ACK_WAITERS) { + zd_mac_tx_status(hw, skb_dequeue(q), + mac->ack_pending ? mac->ack_signal : 0, + NULL); + mac->ack_pending = 0; + } + } +} + +static int zd_calc_tx_length_us(u8 *service, u8 zd_rate, u16 tx_length) +{ + /* ZD_PURE_RATE() must be used to remove the modulation type flag of + * the zd-rate values. + */ + static const u8 rate_divisor[] = { + [ZD_PURE_RATE(ZD_CCK_RATE_1M)] = 1, + [ZD_PURE_RATE(ZD_CCK_RATE_2M)] = 2, + /* Bits must be doubled. */ + [ZD_PURE_RATE(ZD_CCK_RATE_5_5M)] = 11, + [ZD_PURE_RATE(ZD_CCK_RATE_11M)] = 11, + [ZD_PURE_RATE(ZD_OFDM_RATE_6M)] = 6, + [ZD_PURE_RATE(ZD_OFDM_RATE_9M)] = 9, + [ZD_PURE_RATE(ZD_OFDM_RATE_12M)] = 12, + [ZD_PURE_RATE(ZD_OFDM_RATE_18M)] = 18, + [ZD_PURE_RATE(ZD_OFDM_RATE_24M)] = 24, + [ZD_PURE_RATE(ZD_OFDM_RATE_36M)] = 36, + [ZD_PURE_RATE(ZD_OFDM_RATE_48M)] = 48, + [ZD_PURE_RATE(ZD_OFDM_RATE_54M)] = 54, + }; + + u32 bits = (u32)tx_length * 8; + u32 divisor; + + divisor = rate_divisor[ZD_PURE_RATE(zd_rate)]; + if (divisor == 0) + return -EINVAL; + + switch (zd_rate) { + case ZD_CCK_RATE_5_5M: + bits = (2*bits) + 10; /* round up to the next integer */ + break; + case ZD_CCK_RATE_11M: + if (service) { + u32 t = bits % 11; + *service &= ~ZD_PLCP_SERVICE_LENGTH_EXTENSION; + if (0 < t && t <= 3) { + *service |= ZD_PLCP_SERVICE_LENGTH_EXTENSION; + } + } + bits += 10; /* round up to the next integer */ + break; + } + + return bits/divisor; +} + +static void cs_set_control(struct zd_mac *mac, struct zd_ctrlset *cs, + struct ieee80211_hdr *header, + struct ieee80211_tx_info *info) +{ + /* + * CONTROL TODO: + * - if backoff needed, enable bit 0 + * - if burst (backoff not needed) disable bit 0 + */ + + cs->control = 0; + + /* First fragment */ + if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) + cs->control |= ZD_CS_NEED_RANDOM_BACKOFF; + + /* No ACK expected (multicast, etc.) */ + if (info->flags & IEEE80211_TX_CTL_NO_ACK) + cs->control |= ZD_CS_NO_ACK; + + /* PS-POLL */ + if (ieee80211_is_pspoll(header->frame_control)) + cs->control |= ZD_CS_PS_POLL_FRAME; + + if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) + cs->control |= ZD_CS_RTS; + + if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) + cs->control |= ZD_CS_SELF_CTS; + + /* FIXME: Management frame? */ +} + +static bool zd_mac_match_cur_beacon(struct zd_mac *mac, struct sk_buff *beacon) +{ + if (!mac->beacon.cur_beacon) + return false; + + if (mac->beacon.cur_beacon->len != beacon->len) + return false; + + return !memcmp(beacon->data, mac->beacon.cur_beacon->data, beacon->len); +} + +static void zd_mac_free_cur_beacon_locked(struct zd_mac *mac) +{ + ZD_ASSERT(mutex_is_locked(&mac->chip.mutex)); + + kfree_skb(mac->beacon.cur_beacon); + mac->beacon.cur_beacon = NULL; +} + +static void zd_mac_free_cur_beacon(struct zd_mac *mac) +{ + mutex_lock(&mac->chip.mutex); + zd_mac_free_cur_beacon_locked(mac); + mutex_unlock(&mac->chip.mutex); +} + +static int zd_mac_config_beacon(struct ieee80211_hw *hw, struct sk_buff *beacon, + bool in_intr) +{ + struct zd_mac *mac = zd_hw_mac(hw); + int r, ret, num_cmds, req_pos = 0; + u32 tmp, j = 0; + /* 4 more bytes for tail CRC */ + u32 full_len = beacon->len + 4; + unsigned long end_jiffies, message_jiffies; + struct zd_ioreq32 *ioreqs; + + mutex_lock(&mac->chip.mutex); + + /* Check if hw already has this beacon. */ + if (zd_mac_match_cur_beacon(mac, beacon)) { + r = 0; + goto out_nofree; + } + + /* Alloc memory for full beacon write at once. */ + num_cmds = 1 + zd_chip_is_zd1211b(&mac->chip) + full_len; + ioreqs = kmalloc_array(num_cmds, sizeof(struct zd_ioreq32), + GFP_KERNEL); + if (!ioreqs) { + r = -ENOMEM; + goto out_nofree; + } + + r = zd_iowrite32_locked(&mac->chip, 0, CR_BCN_FIFO_SEMAPHORE); + if (r < 0) + goto out; + r = zd_ioread32_locked(&mac->chip, &tmp, CR_BCN_FIFO_SEMAPHORE); + if (r < 0) + goto release_sema; + if (in_intr && tmp & 0x2) { + r = -EBUSY; + goto release_sema; + } + + end_jiffies = jiffies + HZ / 2; /*~500ms*/ + message_jiffies = jiffies + HZ / 10; /*~100ms*/ + while (tmp & 0x2) { + r = zd_ioread32_locked(&mac->chip, &tmp, CR_BCN_FIFO_SEMAPHORE); + if (r < 0) + goto release_sema; + if (time_is_before_eq_jiffies(message_jiffies)) { + message_jiffies = jiffies + HZ / 10; + dev_err(zd_mac_dev(mac), + "CR_BCN_FIFO_SEMAPHORE not ready\n"); + if (time_is_before_eq_jiffies(end_jiffies)) { + dev_err(zd_mac_dev(mac), + "Giving up beacon config.\n"); + r = -ETIMEDOUT; + goto reset_device; + } + } + msleep(20); + } + + ioreqs[req_pos].addr = CR_BCN_FIFO; + ioreqs[req_pos].value = full_len - 1; + req_pos++; + if (zd_chip_is_zd1211b(&mac->chip)) { + ioreqs[req_pos].addr = CR_BCN_LENGTH; + ioreqs[req_pos].value = full_len - 1; + req_pos++; + } + + for (j = 0 ; j < beacon->len; j++) { + ioreqs[req_pos].addr = CR_BCN_FIFO; + ioreqs[req_pos].value = *((u8 *)(beacon->data + j)); + req_pos++; + } + + for (j = 0; j < 4; j++) { + ioreqs[req_pos].addr = CR_BCN_FIFO; + ioreqs[req_pos].value = 0x0; + req_pos++; + } + + BUG_ON(req_pos != num_cmds); + + r = zd_iowrite32a_locked(&mac->chip, ioreqs, num_cmds); + +release_sema: + /* + * Try very hard to release device beacon semaphore, as otherwise + * device/driver can be left in unusable state. + */ + end_jiffies = jiffies + HZ / 2; /*~500ms*/ + ret = zd_iowrite32_locked(&mac->chip, 1, CR_BCN_FIFO_SEMAPHORE); + while (ret < 0) { + if (in_intr || time_is_before_eq_jiffies(end_jiffies)) { + ret = -ETIMEDOUT; + break; + } + + msleep(20); + ret = zd_iowrite32_locked(&mac->chip, 1, CR_BCN_FIFO_SEMAPHORE); + } + + if (ret < 0) + dev_err(zd_mac_dev(mac), "Could not release " + "CR_BCN_FIFO_SEMAPHORE!\n"); + if (r < 0 || ret < 0) { + if (r >= 0) + r = ret; + + /* We don't know if beacon was written successfully or not, + * so clear current. */ + zd_mac_free_cur_beacon_locked(mac); + + goto out; + } + + /* Beacon has now been written successfully, update current. */ + zd_mac_free_cur_beacon_locked(mac); + mac->beacon.cur_beacon = beacon; + beacon = NULL; + + /* 802.11b/g 2.4G CCK 1Mb + * 802.11a, not yet implemented, uses different values (see GPL vendor + * driver) + */ + r = zd_iowrite32_locked(&mac->chip, 0x00000400 | (full_len << 19), + CR_BCN_PLCP_CFG); +out: + kfree(ioreqs); +out_nofree: + kfree_skb(beacon); + mutex_unlock(&mac->chip.mutex); + + return r; + +reset_device: + zd_mac_free_cur_beacon_locked(mac); + kfree_skb(beacon); + + mutex_unlock(&mac->chip.mutex); + kfree(ioreqs); + + /* semaphore stuck, reset device to avoid fw freeze later */ + dev_warn(zd_mac_dev(mac), "CR_BCN_FIFO_SEMAPHORE stuck, " + "resetting device..."); + usb_queue_reset_device(mac->chip.usb.intf); + + return r; +} + +static int fill_ctrlset(struct zd_mac *mac, + struct sk_buff *skb) +{ + int r; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + unsigned int frag_len = skb->len + FCS_LEN; + unsigned int packet_length; + struct ieee80211_rate *txrate; + struct zd_ctrlset *cs = skb_push(skb, sizeof(struct zd_ctrlset)); + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + + ZD_ASSERT(frag_len <= 0xffff); + + /* + * Firmware computes the duration itself (for all frames except PSPoll) + * and needs the field set to 0 at input, otherwise firmware messes up + * duration_id and sets bits 14 and 15 on. + */ + if (!ieee80211_is_pspoll(hdr->frame_control)) + hdr->duration_id = 0; + + txrate = ieee80211_get_tx_rate(mac->hw, info); + + cs->modulation = txrate->hw_value; + if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) + cs->modulation = txrate->hw_value_short; + + cs->tx_length = cpu_to_le16(frag_len); + + cs_set_control(mac, cs, hdr, info); + + packet_length = frag_len + sizeof(struct zd_ctrlset) + 10; + ZD_ASSERT(packet_length <= 0xffff); + /* ZD1211B: Computing the length difference this way, gives us + * flexibility to compute the packet length. + */ + cs->packet_length = cpu_to_le16(zd_chip_is_zd1211b(&mac->chip) ? + packet_length - frag_len : packet_length); + + /* + * CURRENT LENGTH: + * - transmit frame length in microseconds + * - seems to be derived from frame length + * - see Cal_Us_Service() in zdinlinef.h + * - if macp->bTxBurstEnable is enabled, then multiply by 4 + * - bTxBurstEnable is never set in the vendor driver + * + * SERVICE: + * - "for PLCP configuration" + * - always 0 except in some situations at 802.11b 11M + * - see line 53 of zdinlinef.h + */ + cs->service = 0; + r = zd_calc_tx_length_us(&cs->service, ZD_RATE(cs->modulation), + le16_to_cpu(cs->tx_length)); + if (r < 0) + return r; + cs->current_length = cpu_to_le16(r); + cs->next_frame_length = 0; + + return 0; +} + +/** + * zd_op_tx - transmits a network frame to the device + * + * @hw: a &struct ieee80211_hw pointer + * @control: the control structure + * @skb: socket buffer + * + * This function transmit an IEEE 802.11 network frame to the device. The + * control block of the skbuff will be initialized. If necessary the incoming + * mac80211 queues will be stopped. + */ +static void zd_op_tx(struct ieee80211_hw *hw, + struct ieee80211_tx_control *control, + struct sk_buff *skb) +{ + struct zd_mac *mac = zd_hw_mac(hw); + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + int r; + + r = fill_ctrlset(mac, skb); + if (r) + goto fail; + + info->rate_driver_data[0] = hw; + + r = zd_usb_tx(&mac->chip.usb, skb); + if (r) + goto fail; + return; + +fail: + dev_kfree_skb(skb); +} + +/** + * filter_ack - filters incoming packets for acknowledgements + * @hw: a &struct ieee80211_hw pointer + * @rx_hdr: received header + * @stats: the status for the received packet + * + * This functions looks for ACK packets and tries to match them with the + * frames in the tx queue. If a match is found the frame will be dequeued and + * the upper layers is informed about the successful transmission. If + * mac80211 queues have been stopped and the number of frames still to be + * transmitted is low the queues will be opened again. + * + * Returns 1 if the frame was an ACK, 0 if it was ignored. + */ +static int filter_ack(struct ieee80211_hw *hw, struct ieee80211_hdr *rx_hdr, + struct ieee80211_rx_status *stats) +{ + struct zd_mac *mac = zd_hw_mac(hw); + struct sk_buff *skb; + struct sk_buff_head *q; + unsigned long flags; + int found = 0; + int i, position = 0; + + if (!ieee80211_is_ack(rx_hdr->frame_control)) + return 0; + + q = &mac->ack_wait_queue; + spin_lock_irqsave(&q->lock, flags); + skb_queue_walk(q, skb) { + struct ieee80211_hdr *tx_hdr; + + position ++; + + if (mac->ack_pending && skb_queue_is_first(q, skb)) + continue; + + tx_hdr = (struct ieee80211_hdr *)skb->data; + if (likely(ether_addr_equal(tx_hdr->addr2, rx_hdr->addr1))) + { + found = 1; + break; + } + } + + if (found) { + for (i=1; i<position; i++) { + skb = __skb_dequeue(q); + zd_mac_tx_status(hw, skb, + mac->ack_pending ? mac->ack_signal : 0, + NULL); + mac->ack_pending = 0; + } + + mac->ack_pending = 1; + mac->ack_signal = stats->signal; + + /* Prevent pending tx-packet on AP-mode */ + if (mac->type == NL80211_IFTYPE_AP) { + skb = __skb_dequeue(q); + zd_mac_tx_status(hw, skb, mac->ack_signal, NULL); + mac->ack_pending = 0; + } + } + + spin_unlock_irqrestore(&q->lock, flags); + return 1; +} + +int zd_mac_rx(struct ieee80211_hw *hw, const u8 *buffer, unsigned int length) +{ + struct zd_mac *mac = zd_hw_mac(hw); + struct ieee80211_rx_status stats; + const struct rx_status *status; + struct sk_buff *skb; + int bad_frame = 0; + __le16 fc; + int need_padding; + int i; + u8 rate; + + if (length < ZD_PLCP_HEADER_SIZE + 10 /* IEEE80211_1ADDR_LEN */ + + FCS_LEN + sizeof(struct rx_status)) + return -EINVAL; + + memset(&stats, 0, sizeof(stats)); + + /* Note about pass_failed_fcs and pass_ctrl access below: + * mac locking intentionally omitted here, as this is the only unlocked + * reader and the only writer is configure_filter. Plus, if there were + * any races accessing these variables, it wouldn't really matter. + * If mac80211 ever provides a way for us to access filter flags + * from outside configure_filter, we could improve on this. Also, this + * situation may change once we implement some kind of DMA-into-skb + * RX path. */ + + /* Caller has to ensure that length >= sizeof(struct rx_status). */ + status = (struct rx_status *) + (buffer + (length - sizeof(struct rx_status))); + if (status->frame_status & ZD_RX_ERROR) { + if (mac->pass_failed_fcs && + (status->frame_status & ZD_RX_CRC32_ERROR)) { + stats.flag |= RX_FLAG_FAILED_FCS_CRC; + bad_frame = 1; + } else { + return -EINVAL; + } + } + + stats.freq = zd_channels[_zd_chip_get_channel(&mac->chip) - 1].center_freq; + stats.band = NL80211_BAND_2GHZ; + stats.signal = zd_check_signal(hw, status->signal_strength); + + rate = zd_rx_rate(buffer, status); + + /* todo: return index in the big switches in zd_rx_rate instead */ + for (i = 0; i < mac->band.n_bitrates; i++) + if (rate == mac->band.bitrates[i].hw_value) + stats.rate_idx = i; + + length -= ZD_PLCP_HEADER_SIZE + sizeof(struct rx_status); + buffer += ZD_PLCP_HEADER_SIZE; + + /* Except for bad frames, filter each frame to see if it is an ACK, in + * which case our internal TX tracking is updated. Normally we then + * bail here as there's no need to pass ACKs on up to the stack, but + * there is also the case where the stack has requested us to pass + * control frames on up (pass_ctrl) which we must consider. */ + if (!bad_frame && + filter_ack(hw, (struct ieee80211_hdr *)buffer, &stats) + && !mac->pass_ctrl) + return 0; + + fc = get_unaligned((__le16*)buffer); + need_padding = ieee80211_is_data_qos(fc) ^ ieee80211_has_a4(fc); + + skb = dev_alloc_skb(length + (need_padding ? 2 : 0)); + if (skb == NULL) + return -ENOMEM; + if (need_padding) { + /* Make sure the payload data is 4 byte aligned. */ + skb_reserve(skb, 2); + } + + /* FIXME : could we avoid this big memcpy ? */ + skb_put_data(skb, buffer, length); + + memcpy(IEEE80211_SKB_RXCB(skb), &stats, sizeof(stats)); + ieee80211_rx_irqsafe(hw, skb); + return 0; +} + +static int zd_op_add_interface(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) +{ + struct zd_mac *mac = zd_hw_mac(hw); + + /* using NL80211_IFTYPE_UNSPECIFIED to indicate no mode selected */ + if (mac->type != NL80211_IFTYPE_UNSPECIFIED) + return -EOPNOTSUPP; + + switch (vif->type) { + case NL80211_IFTYPE_MONITOR: + case NL80211_IFTYPE_MESH_POINT: + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_AP: + mac->type = vif->type; + break; + default: + return -EOPNOTSUPP; + } + + mac->vif = vif; + + return set_mac_and_bssid(mac); +} + +static void zd_op_remove_interface(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) +{ + struct zd_mac *mac = zd_hw_mac(hw); + mac->type = NL80211_IFTYPE_UNSPECIFIED; + mac->vif = NULL; + zd_set_beacon_interval(&mac->chip, 0, 0, NL80211_IFTYPE_UNSPECIFIED); + zd_write_mac_addr(&mac->chip, NULL); + + zd_mac_free_cur_beacon(mac); +} + +static int zd_op_config(struct ieee80211_hw *hw, u32 changed) +{ + struct zd_mac *mac = zd_hw_mac(hw); + struct ieee80211_conf *conf = &hw->conf; + + spin_lock_irq(&mac->lock); + mac->channel = conf->chandef.chan->hw_value; + spin_unlock_irq(&mac->lock); + + return zd_chip_set_channel(&mac->chip, conf->chandef.chan->hw_value); +} + +static void zd_beacon_done(struct zd_mac *mac) +{ + struct sk_buff *skb, *beacon; + + if (!test_bit(ZD_DEVICE_RUNNING, &mac->flags)) + return; + if (!mac->vif || mac->vif->type != NL80211_IFTYPE_AP) + return; + + /* + * Send out buffered broad- and multicast frames. + */ + while (!ieee80211_queue_stopped(mac->hw, 0)) { + skb = ieee80211_get_buffered_bc(mac->hw, mac->vif); + if (!skb) + break; + zd_op_tx(mac->hw, NULL, skb); + } + + /* + * Fetch next beacon so that tim_count is updated. + */ + beacon = ieee80211_beacon_get(mac->hw, mac->vif); + if (beacon) + zd_mac_config_beacon(mac->hw, beacon, true); + + spin_lock_irq(&mac->lock); + mac->beacon.last_update = jiffies; + spin_unlock_irq(&mac->lock); +} + +static void zd_process_intr(struct work_struct *work) +{ + u16 int_status; + unsigned long flags; + struct zd_mac *mac = container_of(work, struct zd_mac, process_intr); + + spin_lock_irqsave(&mac->lock, flags); + int_status = le16_to_cpu(*(__le16 *)(mac->intr_buffer + 4)); + spin_unlock_irqrestore(&mac->lock, flags); + + if (int_status & INT_CFG_NEXT_BCN) { + /*dev_dbg_f_limit(zd_mac_dev(mac), "INT_CFG_NEXT_BCN\n");*/ + zd_beacon_done(mac); + } else { + dev_dbg_f(zd_mac_dev(mac), "Unsupported interrupt\n"); + } + + zd_chip_enable_hwint(&mac->chip); +} + + +static u64 zd_op_prepare_multicast(struct ieee80211_hw *hw, + struct netdev_hw_addr_list *mc_list) +{ + struct zd_mac *mac = zd_hw_mac(hw); + struct zd_mc_hash hash; + struct netdev_hw_addr *ha; + + zd_mc_clear(&hash); + + netdev_hw_addr_list_for_each(ha, mc_list) { + dev_dbg_f(zd_mac_dev(mac), "mc addr %pM\n", ha->addr); + zd_mc_add_addr(&hash, ha->addr); + } + + return hash.low | ((u64)hash.high << 32); +} + +#define SUPPORTED_FIF_FLAGS \ + (FIF_ALLMULTI | FIF_FCSFAIL | FIF_CONTROL | \ + FIF_OTHER_BSS | FIF_BCN_PRBRESP_PROMISC) +static void zd_op_configure_filter(struct ieee80211_hw *hw, + unsigned int changed_flags, + unsigned int *new_flags, + u64 multicast) +{ + struct zd_mc_hash hash = { + .low = multicast, + .high = multicast >> 32, + }; + struct zd_mac *mac = zd_hw_mac(hw); + unsigned long flags; + int r; + + /* Only deal with supported flags */ + changed_flags &= SUPPORTED_FIF_FLAGS; + *new_flags &= SUPPORTED_FIF_FLAGS; + + /* + * If multicast parameter (as returned by zd_op_prepare_multicast) + * has changed, no bit in changed_flags is set. To handle this + * situation, we do not return if changed_flags is 0. If we do so, + * we will have some issue with IPv6 which uses multicast for link + * layer address resolution. + */ + if (*new_flags & FIF_ALLMULTI) + zd_mc_add_all(&hash); + + spin_lock_irqsave(&mac->lock, flags); + mac->pass_failed_fcs = !!(*new_flags & FIF_FCSFAIL); + mac->pass_ctrl = !!(*new_flags & FIF_CONTROL); + mac->multicast_hash = hash; + spin_unlock_irqrestore(&mac->lock, flags); + + zd_chip_set_multicast_hash(&mac->chip, &hash); + + if (changed_flags & FIF_CONTROL) { + r = set_rx_filter(mac); + if (r) + dev_err(zd_mac_dev(mac), "set_rx_filter error %d\n", r); + } + + /* no handling required for FIF_OTHER_BSS as we don't currently + * do BSSID filtering */ + /* FIXME: in future it would be nice to enable the probe response + * filter (so that the driver doesn't see them) until + * FIF_BCN_PRBRESP_PROMISC is set. however due to atomicity here, we'd + * have to schedule work to enable prbresp reception, which might + * happen too late. For now we'll just listen and forward them all the + * time. */ +} + +static void set_rts_cts(struct zd_mac *mac, unsigned int short_preamble) +{ + mutex_lock(&mac->chip.mutex); + zd_chip_set_rts_cts_rate_locked(&mac->chip, short_preamble); + mutex_unlock(&mac->chip.mutex); +} + +static void zd_op_bss_info_changed(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *bss_conf, + u32 changes) +{ + struct zd_mac *mac = zd_hw_mac(hw); + int associated; + + dev_dbg_f(zd_mac_dev(mac), "changes: %x\n", changes); + + if (mac->type == NL80211_IFTYPE_MESH_POINT || + mac->type == NL80211_IFTYPE_ADHOC || + mac->type == NL80211_IFTYPE_AP) { + associated = true; + if (changes & BSS_CHANGED_BEACON) { + struct sk_buff *beacon = ieee80211_beacon_get(hw, vif); + + if (beacon) { + zd_chip_disable_hwint(&mac->chip); + zd_mac_config_beacon(hw, beacon, false); + zd_chip_enable_hwint(&mac->chip); + } + } + + if (changes & BSS_CHANGED_BEACON_ENABLED) { + u16 interval = 0; + u8 period = 0; + + if (bss_conf->enable_beacon) { + period = bss_conf->dtim_period; + interval = bss_conf->beacon_int; + } + + spin_lock_irq(&mac->lock); + mac->beacon.period = period; + mac->beacon.interval = interval; + mac->beacon.last_update = jiffies; + spin_unlock_irq(&mac->lock); + + zd_set_beacon_interval(&mac->chip, interval, period, + mac->type); + } + } else + associated = is_valid_ether_addr(bss_conf->bssid); + + spin_lock_irq(&mac->lock); + mac->associated = associated; + spin_unlock_irq(&mac->lock); + + /* TODO: do hardware bssid filtering */ + + if (changes & BSS_CHANGED_ERP_PREAMBLE) { + spin_lock_irq(&mac->lock); + mac->short_preamble = bss_conf->use_short_preamble; + spin_unlock_irq(&mac->lock); + + set_rts_cts(mac, bss_conf->use_short_preamble); + } +} + +static u64 zd_op_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif) +{ + struct zd_mac *mac = zd_hw_mac(hw); + return zd_chip_get_tsf(&mac->chip); +} + +static const struct ieee80211_ops zd_ops = { + .tx = zd_op_tx, + .start = zd_op_start, + .stop = zd_op_stop, + .add_interface = zd_op_add_interface, + .remove_interface = zd_op_remove_interface, + .config = zd_op_config, + .prepare_multicast = zd_op_prepare_multicast, + .configure_filter = zd_op_configure_filter, + .bss_info_changed = zd_op_bss_info_changed, + .get_tsf = zd_op_get_tsf, +}; + +struct ieee80211_hw *zd_mac_alloc_hw(struct usb_interface *intf) +{ + struct zd_mac *mac; + struct ieee80211_hw *hw; + + hw = ieee80211_alloc_hw(sizeof(struct zd_mac), &zd_ops); + if (!hw) { + dev_dbg_f(&intf->dev, "out of memory\n"); + return NULL; + } + + mac = zd_hw_mac(hw); + + memset(mac, 0, sizeof(*mac)); + spin_lock_init(&mac->lock); + mac->hw = hw; + + mac->type = NL80211_IFTYPE_UNSPECIFIED; + + memcpy(mac->channels, zd_channels, sizeof(zd_channels)); + memcpy(mac->rates, zd_rates, sizeof(zd_rates)); + mac->band.n_bitrates = ARRAY_SIZE(zd_rates); + mac->band.bitrates = mac->rates; + mac->band.n_channels = ARRAY_SIZE(zd_channels); + mac->band.channels = mac->channels; + + hw->wiphy->bands[NL80211_BAND_2GHZ] = &mac->band; + + ieee80211_hw_set(hw, MFP_CAPABLE); + ieee80211_hw_set(hw, HOST_BROADCAST_PS_BUFFERING); + ieee80211_hw_set(hw, RX_INCLUDES_FCS); + ieee80211_hw_set(hw, SIGNAL_UNSPEC); + + hw->wiphy->interface_modes = + BIT(NL80211_IFTYPE_MESH_POINT) | + BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_ADHOC) | + BIT(NL80211_IFTYPE_AP); + + wiphy_ext_feature_set(hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST); + + hw->max_signal = 100; + hw->queues = 1; + hw->extra_tx_headroom = sizeof(struct zd_ctrlset); + + /* + * Tell mac80211 that we support multi rate retries + */ + hw->max_rates = IEEE80211_TX_MAX_RATES; + hw->max_rate_tries = 18; /* 9 rates * 2 retries/rate */ + + skb_queue_head_init(&mac->ack_wait_queue); + mac->ack_pending = 0; + + zd_chip_init(&mac->chip, hw, intf); + housekeeping_init(mac); + beacon_init(mac); + INIT_WORK(&mac->process_intr, zd_process_intr); + + SET_IEEE80211_DEV(hw, &intf->dev); + return hw; +} + +#define BEACON_WATCHDOG_DELAY round_jiffies_relative(HZ) + +static void beacon_watchdog_handler(struct work_struct *work) +{ + struct zd_mac *mac = + container_of(work, struct zd_mac, beacon.watchdog_work.work); + struct sk_buff *beacon; + unsigned long timeout; + int interval, period; + + if (!test_bit(ZD_DEVICE_RUNNING, &mac->flags)) + goto rearm; + if (mac->type != NL80211_IFTYPE_AP || !mac->vif) + goto rearm; + + spin_lock_irq(&mac->lock); + interval = mac->beacon.interval; + period = mac->beacon.period; + timeout = mac->beacon.last_update + + msecs_to_jiffies(interval * 1024 / 1000) * 3; + spin_unlock_irq(&mac->lock); + + if (interval > 0 && time_is_before_jiffies(timeout)) { + dev_dbg_f(zd_mac_dev(mac), "beacon interrupt stalled, " + "restarting. " + "(interval: %d, dtim: %d)\n", + interval, period); + + zd_chip_disable_hwint(&mac->chip); + + beacon = ieee80211_beacon_get(mac->hw, mac->vif); + if (beacon) { + zd_mac_free_cur_beacon(mac); + + zd_mac_config_beacon(mac->hw, beacon, false); + } + + zd_set_beacon_interval(&mac->chip, interval, period, mac->type); + + zd_chip_enable_hwint(&mac->chip); + + spin_lock_irq(&mac->lock); + mac->beacon.last_update = jiffies; + spin_unlock_irq(&mac->lock); + } + +rearm: + queue_delayed_work(zd_workqueue, &mac->beacon.watchdog_work, + BEACON_WATCHDOG_DELAY); +} + +static void beacon_init(struct zd_mac *mac) +{ + INIT_DELAYED_WORK(&mac->beacon.watchdog_work, beacon_watchdog_handler); +} + +static void beacon_enable(struct zd_mac *mac) +{ + dev_dbg_f(zd_mac_dev(mac), "\n"); + + mac->beacon.last_update = jiffies; + queue_delayed_work(zd_workqueue, &mac->beacon.watchdog_work, + BEACON_WATCHDOG_DELAY); +} + +static void beacon_disable(struct zd_mac *mac) +{ + dev_dbg_f(zd_mac_dev(mac), "\n"); + cancel_delayed_work_sync(&mac->beacon.watchdog_work); + + zd_mac_free_cur_beacon(mac); +} + +#define LINK_LED_WORK_DELAY HZ + +static void link_led_handler(struct work_struct *work) +{ + struct zd_mac *mac = + container_of(work, struct zd_mac, housekeeping.link_led_work.work); + struct zd_chip *chip = &mac->chip; + int is_associated; + int r; + + if (!test_bit(ZD_DEVICE_RUNNING, &mac->flags)) + goto requeue; + + spin_lock_irq(&mac->lock); + is_associated = mac->associated; + spin_unlock_irq(&mac->lock); + + r = zd_chip_control_leds(chip, + is_associated ? ZD_LED_ASSOCIATED : ZD_LED_SCANNING); + if (r) + dev_dbg_f(zd_mac_dev(mac), "zd_chip_control_leds error %d\n", r); + +requeue: + queue_delayed_work(zd_workqueue, &mac->housekeeping.link_led_work, + LINK_LED_WORK_DELAY); +} + +static void housekeeping_init(struct zd_mac *mac) +{ + INIT_DELAYED_WORK(&mac->housekeeping.link_led_work, link_led_handler); +} + +static void housekeeping_enable(struct zd_mac *mac) +{ + dev_dbg_f(zd_mac_dev(mac), "\n"); + queue_delayed_work(zd_workqueue, &mac->housekeeping.link_led_work, + 0); +} + +static void housekeeping_disable(struct zd_mac *mac) +{ + dev_dbg_f(zd_mac_dev(mac), "\n"); + cancel_delayed_work_sync(&mac->housekeeping.link_led_work); + zd_chip_control_leds(&mac->chip, ZD_LED_OFF); +} diff --git a/drivers/net/wireless/zydas/zd1211rw/zd_mac.h b/drivers/net/wireless/zydas/zd1211rw/zd_mac.h new file mode 100644 index 000000000..5ff84bdc5 --- /dev/null +++ b/drivers/net/wireless/zydas/zd1211rw/zd_mac.h @@ -0,0 +1,315 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* ZD1211 USB-WLAN driver for Linux + * + * Copyright (C) 2005-2007 Ulrich Kunitz <kune@deine-taler.de> + * Copyright (C) 2006-2007 Daniel Drake <dsd@gentoo.org> + */ + +#ifndef _ZD_MAC_H +#define _ZD_MAC_H + +#include <linux/kernel.h> +#include <net/mac80211.h> + +#include "zd_chip.h" + +struct zd_ctrlset { + u8 modulation; + __le16 tx_length; + u8 control; + /* stores only the difference to tx_length on ZD1211B */ + __le16 packet_length; + __le16 current_length; + u8 service; + __le16 next_frame_length; +} __packed; + +#define ZD_CS_RESERVED_SIZE 25 + +/* The field modulation of struct zd_ctrlset controls the bit rate, the use + * of short or long preambles in 802.11b (CCK mode) or the use of 802.11a or + * 802.11g in OFDM mode. + * + * The term zd-rate is used for the combination of the modulation type flag + * and the "pure" rate value. + */ +#define ZD_PURE_RATE_MASK 0x0f +#define ZD_MODULATION_TYPE_MASK 0x10 +#define ZD_RATE_MASK (ZD_PURE_RATE_MASK|ZD_MODULATION_TYPE_MASK) +#define ZD_PURE_RATE(modulation) ((modulation) & ZD_PURE_RATE_MASK) +#define ZD_MODULATION_TYPE(modulation) ((modulation) & ZD_MODULATION_TYPE_MASK) +#define ZD_RATE(modulation) ((modulation) & ZD_RATE_MASK) + +/* The two possible modulation types. Notify that 802.11b doesn't use the CCK + * codeing for the 1 and 2 MBit/s rate. We stay with the term here to remain + * consistent with uses the term at other places. + */ +#define ZD_CCK 0x00 +#define ZD_OFDM 0x10 + +/* The ZD1211 firmware uses proprietary encodings of the 802.11b (CCK) rates. + * For OFDM the PLCP rate encodings are used. We combine these "pure" rates + * with the modulation type flag and call the resulting values zd-rates. + */ +#define ZD_CCK_RATE_1M (ZD_CCK|0x00) +#define ZD_CCK_RATE_2M (ZD_CCK|0x01) +#define ZD_CCK_RATE_5_5M (ZD_CCK|0x02) +#define ZD_CCK_RATE_11M (ZD_CCK|0x03) +#define ZD_OFDM_RATE_6M (ZD_OFDM|ZD_OFDM_PLCP_RATE_6M) +#define ZD_OFDM_RATE_9M (ZD_OFDM|ZD_OFDM_PLCP_RATE_9M) +#define ZD_OFDM_RATE_12M (ZD_OFDM|ZD_OFDM_PLCP_RATE_12M) +#define ZD_OFDM_RATE_18M (ZD_OFDM|ZD_OFDM_PLCP_RATE_18M) +#define ZD_OFDM_RATE_24M (ZD_OFDM|ZD_OFDM_PLCP_RATE_24M) +#define ZD_OFDM_RATE_36M (ZD_OFDM|ZD_OFDM_PLCP_RATE_36M) +#define ZD_OFDM_RATE_48M (ZD_OFDM|ZD_OFDM_PLCP_RATE_48M) +#define ZD_OFDM_RATE_54M (ZD_OFDM|ZD_OFDM_PLCP_RATE_54M) + +/* The bit 5 of the zd_ctrlset modulation field controls the preamble in CCK + * mode or the 802.11a/802.11g selection in OFDM mode. + */ +#define ZD_CCK_PREA_LONG 0x00 +#define ZD_CCK_PREA_SHORT 0x20 +#define ZD_OFDM_MODE_11G 0x00 +#define ZD_OFDM_MODE_11A 0x20 + +/* zd_ctrlset control field */ +#define ZD_CS_NEED_RANDOM_BACKOFF 0x01 +#define ZD_CS_NO_ACK 0x02 + +#define ZD_CS_FRAME_TYPE_MASK 0x0c +#define ZD_CS_DATA_FRAME 0x00 +#define ZD_CS_PS_POLL_FRAME 0x04 +#define ZD_CS_MANAGEMENT_FRAME 0x08 +#define ZD_CS_NO_SEQUENCE_CTL_FRAME 0x0c + +#define ZD_CS_WAKE_DESTINATION 0x10 +#define ZD_CS_RTS 0x20 +#define ZD_CS_ENCRYPT 0x40 +#define ZD_CS_SELF_CTS 0x80 + +/* Incoming frames are prepended by a PLCP header */ +#define ZD_PLCP_HEADER_SIZE 5 + +struct rx_length_info { + __le16 length[3]; + __le16 tag; +} __packed; + +#define RX_LENGTH_INFO_TAG 0x697e + +struct rx_status { + u8 signal_quality_cck; + /* rssi */ + u8 signal_strength; + u8 signal_quality_ofdm; + u8 decryption_type; + u8 frame_status; +} __packed; + +/* rx_status field decryption_type */ +#define ZD_RX_NO_WEP 0 +#define ZD_RX_WEP64 1 +#define ZD_RX_TKIP 2 +#define ZD_RX_AES 4 +#define ZD_RX_WEP128 5 +#define ZD_RX_WEP256 6 + +/* rx_status field frame_status */ +#define ZD_RX_FRAME_MODULATION_MASK 0x01 +#define ZD_RX_CCK 0x00 +#define ZD_RX_OFDM 0x01 + +#define ZD_RX_TIMEOUT_ERROR 0x02 +#define ZD_RX_FIFO_OVERRUN_ERROR 0x04 +#define ZD_RX_DECRYPTION_ERROR 0x08 +#define ZD_RX_CRC32_ERROR 0x10 +#define ZD_RX_NO_ADDR1_MATCH_ERROR 0x20 +#define ZD_RX_CRC16_ERROR 0x40 +#define ZD_RX_ERROR 0x80 + +struct tx_retry_rate { + int count; /* number of valid element in rate[] array */ + int rate[10]; /* retry rates, described by an index in zd_rates[] */ +}; + +struct tx_status { + u8 type; /* must always be 0x01 : USB_INT_TYPE */ + u8 id; /* must always be 0xa0 : USB_INT_ID_RETRY_FAILED */ + u8 rate; + u8 pad; + u8 mac[ETH_ALEN]; + u8 retry; + u8 failure; +} __packed; + +enum mac_flags { + MAC_FIXED_CHANNEL = 0x01, +}; + +struct housekeeping { + struct delayed_work link_led_work; +}; + +struct beacon { + struct delayed_work watchdog_work; + struct sk_buff *cur_beacon; + unsigned long last_update; + u16 interval; + u8 period; +}; + +enum zd_device_flags { + ZD_DEVICE_RUNNING, +}; + +#define ZD_MAC_STATS_BUFFER_SIZE 16 + +#define ZD_MAC_MAX_ACK_WAITERS 50 + +struct zd_mac { + struct zd_chip chip; + spinlock_t lock; + spinlock_t intr_lock; + struct ieee80211_hw *hw; + struct ieee80211_vif *vif; + struct housekeeping housekeeping; + struct beacon beacon; + struct work_struct set_rts_cts_work; + struct work_struct process_intr; + struct zd_mc_hash multicast_hash; + u8 intr_buffer[USB_MAX_EP_INT_BUFFER]; + u8 regdomain; + u8 default_regdomain; + u8 channel; + int type; + int associated; + unsigned long flags; + struct sk_buff_head ack_wait_queue; + struct ieee80211_channel channels[14]; + struct ieee80211_rate rates[12]; + struct ieee80211_supported_band band; + + /* Short preamble (used for RTS/CTS) */ + unsigned int short_preamble:1; + + /* whether to pass frames with CRC errors to stack */ + unsigned int pass_failed_fcs:1; + + /* whether to pass control frames to stack */ + unsigned int pass_ctrl:1; + + /* whether we have received a 802.11 ACK that is pending */ + unsigned int ack_pending:1; + + /* signal strength of the last 802.11 ACK received */ + int ack_signal; +}; + +#define ZD_REGDOMAIN_FCC 0x10 +#define ZD_REGDOMAIN_IC 0x20 +#define ZD_REGDOMAIN_ETSI 0x30 +#define ZD_REGDOMAIN_SPAIN 0x31 +#define ZD_REGDOMAIN_FRANCE 0x32 +#define ZD_REGDOMAIN_JAPAN_2 0x40 +#define ZD_REGDOMAIN_JAPAN 0x41 +#define ZD_REGDOMAIN_JAPAN_3 0x49 + +enum { + MIN_CHANNEL24 = 1, + MAX_CHANNEL24 = 14, +}; + +#define ZD_PLCP_SERVICE_LENGTH_EXTENSION 0x80 + +struct ofdm_plcp_header { + u8 prefix[3]; + __le16 service; +} __packed; + +static inline u8 zd_ofdm_plcp_header_rate(const struct ofdm_plcp_header *header) +{ + return header->prefix[0] & 0xf; +} + +/* The following defines give the encoding of the 4-bit rate field in the + * OFDM (802.11a/802.11g) PLCP header. Notify that these values are used to + * define the zd-rate values for OFDM. + * + * See the struct zd_ctrlset definition in zd_mac.h. + */ +#define ZD_OFDM_PLCP_RATE_6M 0xb +#define ZD_OFDM_PLCP_RATE_9M 0xf +#define ZD_OFDM_PLCP_RATE_12M 0xa +#define ZD_OFDM_PLCP_RATE_18M 0xe +#define ZD_OFDM_PLCP_RATE_24M 0x9 +#define ZD_OFDM_PLCP_RATE_36M 0xd +#define ZD_OFDM_PLCP_RATE_48M 0x8 +#define ZD_OFDM_PLCP_RATE_54M 0xc + +struct cck_plcp_header { + u8 signal; + u8 service; + __le16 length; + __le16 crc16; +} __packed; + +static inline u8 zd_cck_plcp_header_signal(const struct cck_plcp_header *header) +{ + return header->signal; +} + +/* These defines give the encodings of the signal field in the 802.11b PLCP + * header. The signal field gives the bit rate of the following packet. Even + * if technically wrong we use CCK here also for the 1 MBit/s and 2 MBit/s + * rate to stay consistent with Zydas and our use of the term. + * + * Notify that these values are *not* used in the zd-rates. + */ +#define ZD_CCK_PLCP_SIGNAL_1M 0x0a +#define ZD_CCK_PLCP_SIGNAL_2M 0x14 +#define ZD_CCK_PLCP_SIGNAL_5M5 0x37 +#define ZD_CCK_PLCP_SIGNAL_11M 0x6e + +static inline struct zd_mac *zd_hw_mac(struct ieee80211_hw *hw) +{ + return hw->priv; +} + +static inline struct zd_mac *zd_chip_to_mac(struct zd_chip *chip) +{ + return container_of(chip, struct zd_mac, chip); +} + +static inline struct zd_mac *zd_usb_to_mac(struct zd_usb *usb) +{ + return zd_chip_to_mac(zd_usb_to_chip(usb)); +} + +static inline u8 *zd_mac_get_perm_addr(struct zd_mac *mac) +{ + return mac->hw->wiphy->perm_addr; +} + +#define zd_mac_dev(mac) (zd_chip_dev(&(mac)->chip)) + +struct ieee80211_hw *zd_mac_alloc_hw(struct usb_interface *intf); +void zd_mac_clear(struct zd_mac *mac); + +int zd_mac_preinit_hw(struct ieee80211_hw *hw); +int zd_mac_init_hw(struct ieee80211_hw *hw); + +int zd_mac_rx(struct ieee80211_hw *hw, const u8 *buffer, unsigned int length); +void zd_mac_tx_failed(struct urb *urb); +void zd_mac_tx_to_dev(struct sk_buff *skb, int error); + +int zd_op_start(struct ieee80211_hw *hw); +void zd_op_stop(struct ieee80211_hw *hw); +int zd_restore_settings(struct zd_mac *mac); + +#ifdef DEBUG +void zd_dump_rx_status(const struct rx_status *status); +#else +#define zd_dump_rx_status(status) +#endif /* DEBUG */ + +#endif /* _ZD_MAC_H */ diff --git a/drivers/net/wireless/zydas/zd1211rw/zd_rf.c b/drivers/net/wireless/zydas/zd1211rw/zd_rf.c new file mode 100644 index 000000000..d356ae330 --- /dev/null +++ b/drivers/net/wireless/zydas/zd1211rw/zd_rf.c @@ -0,0 +1,169 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* ZD1211 USB-WLAN driver for Linux + * + * Copyright (C) 2005-2007 Ulrich Kunitz <kune@deine-taler.de> + * Copyright (C) 2006-2007 Daniel Drake <dsd@gentoo.org> + */ + +#include <linux/errno.h> +#include <linux/string.h> + +#include "zd_def.h" +#include "zd_rf.h" +#include "zd_mac.h" +#include "zd_chip.h" + +static const char * const rfs[] = { + [0] = "unknown RF0", + [1] = "unknown RF1", + [UW2451_RF] = "UW2451_RF", + [UCHIP_RF] = "UCHIP_RF", + [AL2230_RF] = "AL2230_RF", + [AL7230B_RF] = "AL7230B_RF", + [THETA_RF] = "THETA_RF", + [AL2210_RF] = "AL2210_RF", + [MAXIM_NEW_RF] = "MAXIM_NEW_RF", + [UW2453_RF] = "UW2453_RF", + [AL2230S_RF] = "AL2230S_RF", + [RALINK_RF] = "RALINK_RF", + [INTERSIL_RF] = "INTERSIL_RF", + [RF2959_RF] = "RF2959_RF", + [MAXIM_NEW2_RF] = "MAXIM_NEW2_RF", + [PHILIPS_RF] = "PHILIPS_RF", +}; + +const char *zd_rf_name(u8 type) +{ + if (type & 0xf0) + type = 0; + return rfs[type]; +} + +void zd_rf_init(struct zd_rf *rf) +{ + memset(rf, 0, sizeof(*rf)); + + /* default to update channel integration, as almost all RF's do want + * this */ + rf->update_channel_int = 1; +} + +void zd_rf_clear(struct zd_rf *rf) +{ + if (rf->clear) + rf->clear(rf); + ZD_MEMCLEAR(rf, sizeof(*rf)); +} + +int zd_rf_init_hw(struct zd_rf *rf, u8 type) +{ + int r = 0; + int t; + struct zd_chip *chip = zd_rf_to_chip(rf); + + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + switch (type) { + case RF2959_RF: + r = zd_rf_init_rf2959(rf); + break; + case AL2230_RF: + case AL2230S_RF: + r = zd_rf_init_al2230(rf); + break; + case AL7230B_RF: + r = zd_rf_init_al7230b(rf); + break; + case MAXIM_NEW_RF: + case UW2453_RF: + r = zd_rf_init_uw2453(rf); + break; + default: + dev_err(zd_chip_dev(chip), + "RF %s %#x is not supported\n", zd_rf_name(type), type); + rf->type = 0; + return -ENODEV; + } + + if (r) + return r; + + rf->type = type; + + r = zd_chip_lock_phy_regs(chip); + if (r) + return r; + t = rf->init_hw(rf); + r = zd_chip_unlock_phy_regs(chip); + if (t) + r = t; + return r; +} + +int zd_rf_scnprint_id(struct zd_rf *rf, char *buffer, size_t size) +{ + return scnprintf(buffer, size, "%s", zd_rf_name(rf->type)); +} + +int zd_rf_set_channel(struct zd_rf *rf, u8 channel) +{ + int r; + + ZD_ASSERT(mutex_is_locked(&zd_rf_to_chip(rf)->mutex)); + if (channel < MIN_CHANNEL24) + return -EINVAL; + if (channel > MAX_CHANNEL24) + return -EINVAL; + dev_dbg_f(zd_chip_dev(zd_rf_to_chip(rf)), "channel: %d\n", channel); + + r = rf->set_channel(rf, channel); + if (r >= 0) + rf->channel = channel; + return r; +} + +int zd_switch_radio_on(struct zd_rf *rf) +{ + int r, t; + struct zd_chip *chip = zd_rf_to_chip(rf); + + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + r = zd_chip_lock_phy_regs(chip); + if (r) + return r; + t = rf->switch_radio_on(rf); + r = zd_chip_unlock_phy_regs(chip); + if (t) + r = t; + return r; +} + +int zd_switch_radio_off(struct zd_rf *rf) +{ + int r, t; + struct zd_chip *chip = zd_rf_to_chip(rf); + + /* TODO: move phy regs handling to zd_chip */ + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + r = zd_chip_lock_phy_regs(chip); + if (r) + return r; + t = rf->switch_radio_off(rf); + r = zd_chip_unlock_phy_regs(chip); + if (t) + r = t; + return r; +} + +int zd_rf_patch_6m_band_edge(struct zd_rf *rf, u8 channel) +{ + if (!rf->patch_6m_band_edge) + return 0; + + return rf->patch_6m_band_edge(rf, channel); +} + +int zd_rf_generic_patch_6m(struct zd_rf *rf, u8 channel) +{ + return zd_chip_generic_patch_6m_band(zd_rf_to_chip(rf), channel); +} + diff --git a/drivers/net/wireless/zydas/zd1211rw/zd_rf.h b/drivers/net/wireless/zydas/zd1211rw/zd_rf.h new file mode 100644 index 000000000..8bfec9e75 --- /dev/null +++ b/drivers/net/wireless/zydas/zd1211rw/zd_rf.h @@ -0,0 +1,98 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* ZD1211 USB-WLAN driver for Linux + * + * Copyright (C) 2005-2007 Ulrich Kunitz <kune@deine-taler.de> + * Copyright (C) 2006-2007 Daniel Drake <dsd@gentoo.org> + */ + +#ifndef _ZD_RF_H +#define _ZD_RF_H + +#define UW2451_RF 0x2 +#define UCHIP_RF 0x3 +#define AL2230_RF 0x4 +#define AL7230B_RF 0x5 /* a,b,g */ +#define THETA_RF 0x6 +#define AL2210_RF 0x7 +#define MAXIM_NEW_RF 0x8 +#define UW2453_RF 0x9 +#define AL2230S_RF 0xa +#define RALINK_RF 0xb +#define INTERSIL_RF 0xc +#define RF2959_RF 0xd +#define MAXIM_NEW2_RF 0xe +#define PHILIPS_RF 0xf + +#define RF_CHANNEL(ch) [(ch)-1] + +/* Provides functions of the RF transceiver. */ + +enum { + RF_REG_BITS = 6, + RF_VALUE_BITS = 18, + RF_RV_BITS = RF_REG_BITS + RF_VALUE_BITS, +}; + +struct zd_rf { + u8 type; + + u8 channel; + + /* whether channel integration and calibration should be updated + * defaults to 1 (yes) */ + u8 update_channel_int:1; + + /* whether ZD_CR47 should be patched from the EEPROM, if the appropriate + * flag is set in the POD. The vendor driver suggests that this should + * be done for all RF's, but a bug in their code prevents but their + * HW_OverWritePhyRegFromE2P() routine from ever taking effect. */ + u8 patch_cck_gain:1; + + /* private RF driver data */ + void *priv; + + /* RF-specific functions */ + int (*init_hw)(struct zd_rf *rf); + int (*set_channel)(struct zd_rf *rf, u8 channel); + int (*switch_radio_on)(struct zd_rf *rf); + int (*switch_radio_off)(struct zd_rf *rf); + int (*patch_6m_band_edge)(struct zd_rf *rf, u8 channel); + void (*clear)(struct zd_rf *rf); +}; + +const char *zd_rf_name(u8 type); +void zd_rf_init(struct zd_rf *rf); +void zd_rf_clear(struct zd_rf *rf); +int zd_rf_init_hw(struct zd_rf *rf, u8 type); + +int zd_rf_scnprint_id(struct zd_rf *rf, char *buffer, size_t size); + +int zd_rf_set_channel(struct zd_rf *rf, u8 channel); + +int zd_switch_radio_on(struct zd_rf *rf); +int zd_switch_radio_off(struct zd_rf *rf); + +int zd_rf_patch_6m_band_edge(struct zd_rf *rf, u8 channel); +int zd_rf_generic_patch_6m(struct zd_rf *rf, u8 channel); + +static inline int zd_rf_should_update_pwr_int(struct zd_rf *rf) +{ + return rf->update_channel_int; +} + +static inline int zd_rf_should_patch_cck_gain(struct zd_rf *rf) +{ + return rf->patch_cck_gain; +} + +int zd_rf_patch_6m_band_edge(struct zd_rf *rf, u8 channel); +int zd_rf_generic_patch_6m(struct zd_rf *rf, u8 channel); + +/* Functions for individual RF chips */ + +int zd_rf_init_rf2959(struct zd_rf *rf); +int zd_rf_init_al2230(struct zd_rf *rf); +int zd_rf_init_al7230b(struct zd_rf *rf); +int zd_rf_init_uw2453(struct zd_rf *rf); + +#endif /* _ZD_RF_H */ diff --git a/drivers/net/wireless/zydas/zd1211rw/zd_rf_al2230.c b/drivers/net/wireless/zydas/zd1211rw/zd_rf_al2230.c new file mode 100644 index 000000000..23ee5571e --- /dev/null +++ b/drivers/net/wireless/zydas/zd1211rw/zd_rf_al2230.c @@ -0,0 +1,431 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* ZD1211 USB-WLAN driver for Linux + * + * Copyright (C) 2005-2007 Ulrich Kunitz <kune@deine-taler.de> + * Copyright (C) 2006-2007 Daniel Drake <dsd@gentoo.org> + */ + +#include <linux/kernel.h> + +#include "zd_rf.h" +#include "zd_usb.h" +#include "zd_chip.h" + +#define IS_AL2230S(chip) ((chip)->al2230s_bit || (chip)->rf.type == AL2230S_RF) + +static const u32 zd1211_al2230_table[][3] = { + RF_CHANNEL( 1) = { 0x03f790, 0x033331, 0x00000d, }, + RF_CHANNEL( 2) = { 0x03f790, 0x0b3331, 0x00000d, }, + RF_CHANNEL( 3) = { 0x03e790, 0x033331, 0x00000d, }, + RF_CHANNEL( 4) = { 0x03e790, 0x0b3331, 0x00000d, }, + RF_CHANNEL( 5) = { 0x03f7a0, 0x033331, 0x00000d, }, + RF_CHANNEL( 6) = { 0x03f7a0, 0x0b3331, 0x00000d, }, + RF_CHANNEL( 7) = { 0x03e7a0, 0x033331, 0x00000d, }, + RF_CHANNEL( 8) = { 0x03e7a0, 0x0b3331, 0x00000d, }, + RF_CHANNEL( 9) = { 0x03f7b0, 0x033331, 0x00000d, }, + RF_CHANNEL(10) = { 0x03f7b0, 0x0b3331, 0x00000d, }, + RF_CHANNEL(11) = { 0x03e7b0, 0x033331, 0x00000d, }, + RF_CHANNEL(12) = { 0x03e7b0, 0x0b3331, 0x00000d, }, + RF_CHANNEL(13) = { 0x03f7c0, 0x033331, 0x00000d, }, + RF_CHANNEL(14) = { 0x03e7c0, 0x066661, 0x00000d, }, +}; + +static const u32 zd1211b_al2230_table[][3] = { + RF_CHANNEL( 1) = { 0x09efc0, 0x8cccc0, 0xb00000, }, + RF_CHANNEL( 2) = { 0x09efc0, 0x8cccd0, 0xb00000, }, + RF_CHANNEL( 3) = { 0x09e7c0, 0x8cccc0, 0xb00000, }, + RF_CHANNEL( 4) = { 0x09e7c0, 0x8cccd0, 0xb00000, }, + RF_CHANNEL( 5) = { 0x05efc0, 0x8cccc0, 0xb00000, }, + RF_CHANNEL( 6) = { 0x05efc0, 0x8cccd0, 0xb00000, }, + RF_CHANNEL( 7) = { 0x05e7c0, 0x8cccc0, 0xb00000, }, + RF_CHANNEL( 8) = { 0x05e7c0, 0x8cccd0, 0xb00000, }, + RF_CHANNEL( 9) = { 0x0defc0, 0x8cccc0, 0xb00000, }, + RF_CHANNEL(10) = { 0x0defc0, 0x8cccd0, 0xb00000, }, + RF_CHANNEL(11) = { 0x0de7c0, 0x8cccc0, 0xb00000, }, + RF_CHANNEL(12) = { 0x0de7c0, 0x8cccd0, 0xb00000, }, + RF_CHANNEL(13) = { 0x03efc0, 0x8cccc0, 0xb00000, }, + RF_CHANNEL(14) = { 0x03e7c0, 0x866660, 0xb00000, }, +}; + +static const struct zd_ioreq16 zd1211b_ioreqs_shared_1[] = { + { ZD_CR240, 0x57 }, { ZD_CR9, 0xe0 }, +}; + +static const struct zd_ioreq16 ioreqs_init_al2230s[] = { + { ZD_CR47, 0x1e }, /* MARK_002 */ + { ZD_CR106, 0x22 }, + { ZD_CR107, 0x2a }, /* MARK_002 */ + { ZD_CR109, 0x13 }, /* MARK_002 */ + { ZD_CR118, 0xf8 }, /* MARK_002 */ + { ZD_CR119, 0x12 }, { ZD_CR122, 0xe0 }, + { ZD_CR128, 0x10 }, /* MARK_001 from 0xe->0x10 */ + { ZD_CR129, 0x0e }, /* MARK_001 from 0xd->0x0e */ + { ZD_CR130, 0x10 }, /* MARK_001 from 0xb->0x0d */ +}; + +static int zd1211b_al2230_finalize_rf(struct zd_chip *chip) +{ + int r; + static const struct zd_ioreq16 ioreqs[] = { + { ZD_CR80, 0x30 }, { ZD_CR81, 0x30 }, { ZD_CR79, 0x58 }, + { ZD_CR12, 0xf0 }, { ZD_CR77, 0x1b }, { ZD_CR78, 0x58 }, + { ZD_CR203, 0x06 }, + { }, + + { ZD_CR240, 0x80 }, + }; + + r = zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); + if (r) + return r; + + /* related to antenna selection? */ + if (chip->new_phy_layout) { + r = zd_iowrite16_locked(chip, 0xe1, ZD_CR9); + if (r) + return r; + } + + return zd_iowrite16_locked(chip, 0x06, ZD_CR203); +} + +static int zd1211_al2230_init_hw(struct zd_rf *rf) +{ + int r; + struct zd_chip *chip = zd_rf_to_chip(rf); + + static const struct zd_ioreq16 ioreqs_init[] = { + { ZD_CR15, 0x20 }, { ZD_CR23, 0x40 }, { ZD_CR24, 0x20 }, + { ZD_CR26, 0x11 }, { ZD_CR28, 0x3e }, { ZD_CR29, 0x00 }, + { ZD_CR44, 0x33 }, { ZD_CR106, 0x2a }, { ZD_CR107, 0x1a }, + { ZD_CR109, 0x09 }, { ZD_CR110, 0x27 }, { ZD_CR111, 0x2b }, + { ZD_CR112, 0x2b }, { ZD_CR119, 0x0a }, { ZD_CR10, 0x89 }, + /* for newest (3rd cut) AL2300 */ + { ZD_CR17, 0x28 }, + { ZD_CR26, 0x93 }, { ZD_CR34, 0x30 }, + /* for newest (3rd cut) AL2300 */ + { ZD_CR35, 0x3e }, + { ZD_CR41, 0x24 }, { ZD_CR44, 0x32 }, + /* for newest (3rd cut) AL2300 */ + { ZD_CR46, 0x96 }, + { ZD_CR47, 0x1e }, { ZD_CR79, 0x58 }, { ZD_CR80, 0x30 }, + { ZD_CR81, 0x30 }, { ZD_CR87, 0x0a }, { ZD_CR89, 0x04 }, + { ZD_CR92, 0x0a }, { ZD_CR99, 0x28 }, { ZD_CR100, 0x00 }, + { ZD_CR101, 0x13 }, { ZD_CR102, 0x27 }, { ZD_CR106, 0x24 }, + { ZD_CR107, 0x2a }, { ZD_CR109, 0x09 }, { ZD_CR110, 0x13 }, + { ZD_CR111, 0x1f }, { ZD_CR112, 0x1f }, { ZD_CR113, 0x27 }, + { ZD_CR114, 0x27 }, + /* for newest (3rd cut) AL2300 */ + { ZD_CR115, 0x24 }, + { ZD_CR116, 0x24 }, { ZD_CR117, 0xf4 }, { ZD_CR118, 0xfc }, + { ZD_CR119, 0x10 }, { ZD_CR120, 0x4f }, { ZD_CR121, 0x77 }, + { ZD_CR122, 0xe0 }, { ZD_CR137, 0x88 }, { ZD_CR252, 0xff }, + { ZD_CR253, 0xff }, + }; + + static const struct zd_ioreq16 ioreqs_pll[] = { + /* shdnb(PLL_ON)=0 */ + { ZD_CR251, 0x2f }, + /* shdnb(PLL_ON)=1 */ + { ZD_CR251, 0x3f }, + { ZD_CR138, 0x28 }, { ZD_CR203, 0x06 }, + }; + + static const u32 rv1[] = { + /* Channel 1 */ + 0x03f790, + 0x033331, + 0x00000d, + + 0x0b3331, + 0x03b812, + 0x00fff3, + }; + + static const u32 rv2[] = { + 0x000da4, + 0x0f4dc5, /* fix freq shift, 0x04edc5 */ + 0x0805b6, + 0x011687, + 0x000688, + 0x0403b9, /* external control TX power (ZD_CR31) */ + 0x00dbba, + 0x00099b, + 0x0bdffc, + 0x00000d, + 0x00500f, + }; + + static const u32 rv3[] = { + 0x00d00f, + 0x004c0f, + 0x00540f, + 0x00700f, + 0x00500f, + }; + + r = zd_iowrite16a_locked(chip, ioreqs_init, ARRAY_SIZE(ioreqs_init)); + if (r) + return r; + + if (IS_AL2230S(chip)) { + r = zd_iowrite16a_locked(chip, ioreqs_init_al2230s, + ARRAY_SIZE(ioreqs_init_al2230s)); + if (r) + return r; + } + + r = zd_rfwritev_locked(chip, rv1, ARRAY_SIZE(rv1), RF_RV_BITS); + if (r) + return r; + + /* improve band edge for AL2230S */ + if (IS_AL2230S(chip)) + r = zd_rfwrite_locked(chip, 0x000824, RF_RV_BITS); + else + r = zd_rfwrite_locked(chip, 0x0005a4, RF_RV_BITS); + if (r) + return r; + + r = zd_rfwritev_locked(chip, rv2, ARRAY_SIZE(rv2), RF_RV_BITS); + if (r) + return r; + + r = zd_iowrite16a_locked(chip, ioreqs_pll, ARRAY_SIZE(ioreqs_pll)); + if (r) + return r; + + r = zd_rfwritev_locked(chip, rv3, ARRAY_SIZE(rv3), RF_RV_BITS); + if (r) + return r; + + return 0; +} + +static int zd1211b_al2230_init_hw(struct zd_rf *rf) +{ + int r; + struct zd_chip *chip = zd_rf_to_chip(rf); + + static const struct zd_ioreq16 ioreqs1[] = { + { ZD_CR10, 0x89 }, { ZD_CR15, 0x20 }, + { ZD_CR17, 0x2B }, /* for newest(3rd cut) AL2230 */ + { ZD_CR23, 0x40 }, { ZD_CR24, 0x20 }, { ZD_CR26, 0x93 }, + { ZD_CR28, 0x3e }, { ZD_CR29, 0x00 }, + { ZD_CR33, 0x28 }, /* 5621 */ + { ZD_CR34, 0x30 }, + { ZD_CR35, 0x3e }, /* for newest(3rd cut) AL2230 */ + { ZD_CR41, 0x24 }, { ZD_CR44, 0x32 }, + { ZD_CR46, 0x99 }, /* for newest(3rd cut) AL2230 */ + { ZD_CR47, 0x1e }, + + /* ZD1211B 05.06.10 */ + { ZD_CR48, 0x06 }, { ZD_CR49, 0xf9 }, { ZD_CR51, 0x01 }, + { ZD_CR52, 0x80 }, { ZD_CR53, 0x7e }, { ZD_CR65, 0x00 }, + { ZD_CR66, 0x00 }, { ZD_CR67, 0x00 }, { ZD_CR68, 0x00 }, + { ZD_CR69, 0x28 }, + + { ZD_CR79, 0x58 }, { ZD_CR80, 0x30 }, { ZD_CR81, 0x30 }, + { ZD_CR87, 0x0a }, { ZD_CR89, 0x04 }, + { ZD_CR91, 0x00 }, /* 5621 */ + { ZD_CR92, 0x0a }, + { ZD_CR98, 0x8d }, /* 4804, for 1212 new algorithm */ + { ZD_CR99, 0x00 }, /* 5621 */ + { ZD_CR101, 0x13 }, { ZD_CR102, 0x27 }, + { ZD_CR106, 0x24 }, /* for newest(3rd cut) AL2230 */ + { ZD_CR107, 0x2a }, + { ZD_CR109, 0x13 }, /* 4804, for 1212 new algorithm */ + { ZD_CR110, 0x1f }, /* 4804, for 1212 new algorithm */ + { ZD_CR111, 0x1f }, { ZD_CR112, 0x1f }, { ZD_CR113, 0x27 }, + { ZD_CR114, 0x27 }, + { ZD_CR115, 0x26 }, /* 24->26 at 4902 for newest(3rd cut) + * AL2230 + */ + { ZD_CR116, 0x24 }, + { ZD_CR117, 0xfa }, /* for 1211b */ + { ZD_CR118, 0xfa }, /* for 1211b */ + { ZD_CR119, 0x10 }, + { ZD_CR120, 0x4f }, + { ZD_CR121, 0x6c }, /* for 1211b */ + { ZD_CR122, 0xfc }, /* E0->FC at 4902 */ + { ZD_CR123, 0x57 }, /* 5623 */ + { ZD_CR125, 0xad }, /* 4804, for 1212 new algorithm */ + { ZD_CR126, 0x6c }, /* 5614 */ + { ZD_CR127, 0x03 }, /* 4804, for 1212 new algorithm */ + { ZD_CR137, 0x50 }, /* 5614 */ + { ZD_CR138, 0xa8 }, + { ZD_CR144, 0xac }, /* 5621 */ + { ZD_CR150, 0x0d }, { ZD_CR252, 0x34 }, { ZD_CR253, 0x34 }, + }; + + static const u32 rv1[] = { + 0x8cccd0, + 0x481dc0, + 0xcfff00, + 0x25a000, + }; + + static const u32 rv2[] = { + /* To improve AL2230 yield, improve phase noise, 4713 */ + 0x25a000, + 0xa3b2f0, + + 0x6da010, /* Reg6 update for MP versio */ + 0xe36280, /* Modified by jxiao for Bor-Chin on 2004/08/02 */ + 0x116000, + 0x9dc020, /* External control TX power (ZD_CR31) */ + 0x5ddb00, /* RegA update for MP version */ + 0xd99000, /* RegB update for MP version */ + 0x3ffbd0, /* RegC update for MP version */ + 0xb00000, /* RegD update for MP version */ + + /* improve phase noise and remove phase calibration,4713 */ + 0xf01a00, + }; + + static const struct zd_ioreq16 ioreqs2[] = { + { ZD_CR251, 0x2f }, /* shdnb(PLL_ON)=0 */ + { ZD_CR251, 0x7f }, /* shdnb(PLL_ON)=1 */ + }; + + static const u32 rv3[] = { + /* To improve AL2230 yield, 4713 */ + 0xf01b00, + 0xf01e00, + 0xf01a00, + }; + + static const struct zd_ioreq16 ioreqs3[] = { + /* related to 6M band edge patching, happens unconditionally */ + { ZD_CR128, 0x14 }, { ZD_CR129, 0x12 }, { ZD_CR130, 0x10 }, + }; + + r = zd_iowrite16a_locked(chip, zd1211b_ioreqs_shared_1, + ARRAY_SIZE(zd1211b_ioreqs_shared_1)); + if (r) + return r; + r = zd_iowrite16a_locked(chip, ioreqs1, ARRAY_SIZE(ioreqs1)); + if (r) + return r; + + if (IS_AL2230S(chip)) { + r = zd_iowrite16a_locked(chip, ioreqs_init_al2230s, + ARRAY_SIZE(ioreqs_init_al2230s)); + if (r) + return r; + } + + r = zd_rfwritev_cr_locked(chip, zd1211b_al2230_table[0], 3); + if (r) + return r; + r = zd_rfwritev_cr_locked(chip, rv1, ARRAY_SIZE(rv1)); + if (r) + return r; + + if (IS_AL2230S(chip)) + r = zd_rfwrite_locked(chip, 0x241000, RF_RV_BITS); + else + r = zd_rfwrite_locked(chip, 0x25a000, RF_RV_BITS); + if (r) + return r; + + r = zd_rfwritev_cr_locked(chip, rv2, ARRAY_SIZE(rv2)); + if (r) + return r; + r = zd_iowrite16a_locked(chip, ioreqs2, ARRAY_SIZE(ioreqs2)); + if (r) + return r; + r = zd_rfwritev_cr_locked(chip, rv3, ARRAY_SIZE(rv3)); + if (r) + return r; + r = zd_iowrite16a_locked(chip, ioreqs3, ARRAY_SIZE(ioreqs3)); + if (r) + return r; + return zd1211b_al2230_finalize_rf(chip); +} + +static int zd1211_al2230_set_channel(struct zd_rf *rf, u8 channel) +{ + int r; + const u32 *rv = zd1211_al2230_table[channel-1]; + struct zd_chip *chip = zd_rf_to_chip(rf); + static const struct zd_ioreq16 ioreqs[] = { + { ZD_CR138, 0x28 }, + { ZD_CR203, 0x06 }, + }; + + r = zd_rfwritev_locked(chip, rv, 3, RF_RV_BITS); + if (r) + return r; + return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); +} + +static int zd1211b_al2230_set_channel(struct zd_rf *rf, u8 channel) +{ + int r; + const u32 *rv = zd1211b_al2230_table[channel-1]; + struct zd_chip *chip = zd_rf_to_chip(rf); + + r = zd_iowrite16a_locked(chip, zd1211b_ioreqs_shared_1, + ARRAY_SIZE(zd1211b_ioreqs_shared_1)); + if (r) + return r; + + r = zd_rfwritev_cr_locked(chip, rv, 3); + if (r) + return r; + + return zd1211b_al2230_finalize_rf(chip); +} + +static int zd1211_al2230_switch_radio_on(struct zd_rf *rf) +{ + struct zd_chip *chip = zd_rf_to_chip(rf); + static const struct zd_ioreq16 ioreqs[] = { + { ZD_CR11, 0x00 }, + { ZD_CR251, 0x3f }, + }; + + return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); +} + +static int zd1211b_al2230_switch_radio_on(struct zd_rf *rf) +{ + struct zd_chip *chip = zd_rf_to_chip(rf); + static const struct zd_ioreq16 ioreqs[] = { + { ZD_CR11, 0x00 }, + { ZD_CR251, 0x7f }, + }; + + return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); +} + +static int al2230_switch_radio_off(struct zd_rf *rf) +{ + struct zd_chip *chip = zd_rf_to_chip(rf); + static const struct zd_ioreq16 ioreqs[] = { + { ZD_CR11, 0x04 }, + { ZD_CR251, 0x2f }, + }; + + return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); +} + +int zd_rf_init_al2230(struct zd_rf *rf) +{ + struct zd_chip *chip = zd_rf_to_chip(rf); + + rf->switch_radio_off = al2230_switch_radio_off; + if (zd_chip_is_zd1211b(chip)) { + rf->init_hw = zd1211b_al2230_init_hw; + rf->set_channel = zd1211b_al2230_set_channel; + rf->switch_radio_on = zd1211b_al2230_switch_radio_on; + } else { + rf->init_hw = zd1211_al2230_init_hw; + rf->set_channel = zd1211_al2230_set_channel; + rf->switch_radio_on = zd1211_al2230_switch_radio_on; + } + rf->patch_6m_band_edge = zd_rf_generic_patch_6m; + rf->patch_cck_gain = 1; + return 0; +} diff --git a/drivers/net/wireless/zydas/zd1211rw/zd_rf_al7230b.c b/drivers/net/wireless/zydas/zd1211rw/zd_rf_al7230b.c new file mode 100644 index 000000000..356783483 --- /dev/null +++ b/drivers/net/wireless/zydas/zd1211rw/zd_rf_al7230b.c @@ -0,0 +1,482 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* ZD1211 USB-WLAN driver for Linux + * + * Copyright (C) 2005-2007 Ulrich Kunitz <kune@deine-taler.de> + * Copyright (C) 2006-2007 Daniel Drake <dsd@gentoo.org> + */ + +#include <linux/kernel.h> + +#include "zd_rf.h" +#include "zd_usb.h" +#include "zd_chip.h" + +static const u32 chan_rv[][2] = { + RF_CHANNEL( 1) = { 0x09ec00, 0x8cccc8 }, + RF_CHANNEL( 2) = { 0x09ec00, 0x8cccd8 }, + RF_CHANNEL( 3) = { 0x09ec00, 0x8cccc0 }, + RF_CHANNEL( 4) = { 0x09ec00, 0x8cccd0 }, + RF_CHANNEL( 5) = { 0x05ec00, 0x8cccc8 }, + RF_CHANNEL( 6) = { 0x05ec00, 0x8cccd8 }, + RF_CHANNEL( 7) = { 0x05ec00, 0x8cccc0 }, + RF_CHANNEL( 8) = { 0x05ec00, 0x8cccd0 }, + RF_CHANNEL( 9) = { 0x0dec00, 0x8cccc8 }, + RF_CHANNEL(10) = { 0x0dec00, 0x8cccd8 }, + RF_CHANNEL(11) = { 0x0dec00, 0x8cccc0 }, + RF_CHANNEL(12) = { 0x0dec00, 0x8cccd0 }, + RF_CHANNEL(13) = { 0x03ec00, 0x8cccc8 }, + RF_CHANNEL(14) = { 0x03ec00, 0x866660 }, +}; + +static const u32 std_rv[] = { + 0x4ff821, + 0xc5fbfc, + 0x21ebfe, + 0xafd401, /* freq shift 0xaad401 */ + 0x6cf56a, + 0xe04073, + 0x193d76, + 0x9dd844, + 0x500007, + 0xd8c010, +}; + +static const u32 rv_init1[] = { + 0x3c9000, + 0xbfffff, + 0x700000, + 0xf15d58, +}; + +static const u32 rv_init2[] = { + 0xf15d59, + 0xf15d5c, + 0xf15d58, +}; + +static const struct zd_ioreq16 ioreqs_sw[] = { + { ZD_CR128, 0x14 }, { ZD_CR129, 0x12 }, { ZD_CR130, 0x10 }, + { ZD_CR38, 0x38 }, { ZD_CR136, 0xdf }, +}; + +static int zd1211b_al7230b_finalize(struct zd_chip *chip) +{ + int r; + static const struct zd_ioreq16 ioreqs[] = { + { ZD_CR80, 0x30 }, { ZD_CR81, 0x30 }, { ZD_CR79, 0x58 }, + { ZD_CR12, 0xf0 }, { ZD_CR77, 0x1b }, { ZD_CR78, 0x58 }, + { ZD_CR203, 0x04 }, + { }, + { ZD_CR240, 0x80 }, + }; + + r = zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); + if (r) + return r; + + if (chip->new_phy_layout) { + /* antenna selection? */ + r = zd_iowrite16_locked(chip, 0xe5, ZD_CR9); + if (r) + return r; + } + + return zd_iowrite16_locked(chip, 0x04, ZD_CR203); +} + +static int zd1211_al7230b_init_hw(struct zd_rf *rf) +{ + int r; + struct zd_chip *chip = zd_rf_to_chip(rf); + + /* All of these writes are identical to AL2230 unless otherwise + * specified */ + static const struct zd_ioreq16 ioreqs_1[] = { + /* This one is 7230-specific, and happens before the rest */ + { ZD_CR240, 0x57 }, + { }, + + { ZD_CR15, 0x20 }, { ZD_CR23, 0x40 }, { ZD_CR24, 0x20 }, + { ZD_CR26, 0x11 }, { ZD_CR28, 0x3e }, { ZD_CR29, 0x00 }, + { ZD_CR44, 0x33 }, + /* This value is different for 7230 (was: 0x2a) */ + { ZD_CR106, 0x22 }, + { ZD_CR107, 0x1a }, { ZD_CR109, 0x09 }, { ZD_CR110, 0x27 }, + { ZD_CR111, 0x2b }, { ZD_CR112, 0x2b }, { ZD_CR119, 0x0a }, + /* This happened further down in AL2230, + * and the value changed (was: 0xe0) */ + { ZD_CR122, 0xfc }, + { ZD_CR10, 0x89 }, + /* for newest (3rd cut) AL2300 */ + { ZD_CR17, 0x28 }, + { ZD_CR26, 0x93 }, { ZD_CR34, 0x30 }, + /* for newest (3rd cut) AL2300 */ + { ZD_CR35, 0x3e }, + { ZD_CR41, 0x24 }, { ZD_CR44, 0x32 }, + /* for newest (3rd cut) AL2300 */ + { ZD_CR46, 0x96 }, + { ZD_CR47, 0x1e }, { ZD_CR79, 0x58 }, { ZD_CR80, 0x30 }, + { ZD_CR81, 0x30 }, { ZD_CR87, 0x0a }, { ZD_CR89, 0x04 }, + { ZD_CR92, 0x0a }, { ZD_CR99, 0x28 }, + /* This value is different for 7230 (was: 0x00) */ + { ZD_CR100, 0x02 }, + { ZD_CR101, 0x13 }, { ZD_CR102, 0x27 }, + /* This value is different for 7230 (was: 0x24) */ + { ZD_CR106, 0x22 }, + /* This value is different for 7230 (was: 0x2a) */ + { ZD_CR107, 0x3f }, + { ZD_CR109, 0x09 }, + /* This value is different for 7230 (was: 0x13) */ + { ZD_CR110, 0x1f }, + { ZD_CR111, 0x1f }, { ZD_CR112, 0x1f }, { ZD_CR113, 0x27 }, + { ZD_CR114, 0x27 }, + /* for newest (3rd cut) AL2300 */ + { ZD_CR115, 0x24 }, + /* This value is different for 7230 (was: 0x24) */ + { ZD_CR116, 0x3f }, + /* This value is different for 7230 (was: 0xf4) */ + { ZD_CR117, 0xfa }, + { ZD_CR118, 0xfc }, { ZD_CR119, 0x10 }, { ZD_CR120, 0x4f }, + { ZD_CR121, 0x77 }, { ZD_CR137, 0x88 }, + /* This one is 7230-specific */ + { ZD_CR138, 0xa8 }, + /* This value is different for 7230 (was: 0xff) */ + { ZD_CR252, 0x34 }, + /* This value is different for 7230 (was: 0xff) */ + { ZD_CR253, 0x34 }, + + /* PLL_OFF */ + { ZD_CR251, 0x2f }, + }; + + static const struct zd_ioreq16 ioreqs_2[] = { + { ZD_CR251, 0x3f }, /* PLL_ON */ + { ZD_CR128, 0x14 }, { ZD_CR129, 0x12 }, { ZD_CR130, 0x10 }, + { ZD_CR38, 0x38 }, { ZD_CR136, 0xdf }, + }; + + r = zd_iowrite16a_locked(chip, ioreqs_1, ARRAY_SIZE(ioreqs_1)); + if (r) + return r; + + r = zd_rfwritev_cr_locked(chip, chan_rv[0], ARRAY_SIZE(chan_rv[0])); + if (r) + return r; + + r = zd_rfwritev_cr_locked(chip, std_rv, ARRAY_SIZE(std_rv)); + if (r) + return r; + + r = zd_rfwritev_cr_locked(chip, rv_init1, ARRAY_SIZE(rv_init1)); + if (r) + return r; + + r = zd_iowrite16a_locked(chip, ioreqs_2, ARRAY_SIZE(ioreqs_2)); + if (r) + return r; + + r = zd_rfwritev_cr_locked(chip, rv_init2, ARRAY_SIZE(rv_init2)); + if (r) + return r; + + r = zd_iowrite16_locked(chip, 0x06, ZD_CR203); + if (r) + return r; + r = zd_iowrite16_locked(chip, 0x80, ZD_CR240); + if (r) + return r; + + return 0; +} + +static int zd1211b_al7230b_init_hw(struct zd_rf *rf) +{ + int r; + struct zd_chip *chip = zd_rf_to_chip(rf); + + static const struct zd_ioreq16 ioreqs_1[] = { + { ZD_CR240, 0x57 }, { ZD_CR9, 0x9 }, + { }, + { ZD_CR10, 0x8b }, { ZD_CR15, 0x20 }, + { ZD_CR17, 0x2B }, /* for newest (3rd cut) AL2230 */ + { ZD_CR20, 0x10 }, /* 4N25->Stone Request */ + { ZD_CR23, 0x40 }, { ZD_CR24, 0x20 }, { ZD_CR26, 0x93 }, + { ZD_CR28, 0x3e }, { ZD_CR29, 0x00 }, + { ZD_CR33, 0x28 }, /* 5613 */ + { ZD_CR34, 0x30 }, + { ZD_CR35, 0x3e }, /* for newest (3rd cut) AL2230 */ + { ZD_CR41, 0x24 }, { ZD_CR44, 0x32 }, + { ZD_CR46, 0x99 }, /* for newest (3rd cut) AL2230 */ + { ZD_CR47, 0x1e }, + + /* ZD1215 5610 */ + { ZD_CR48, 0x00 }, { ZD_CR49, 0x00 }, { ZD_CR51, 0x01 }, + { ZD_CR52, 0x80 }, { ZD_CR53, 0x7e }, { ZD_CR65, 0x00 }, + { ZD_CR66, 0x00 }, { ZD_CR67, 0x00 }, { ZD_CR68, 0x00 }, + { ZD_CR69, 0x28 }, + + { ZD_CR79, 0x58 }, { ZD_CR80, 0x30 }, { ZD_CR81, 0x30 }, + { ZD_CR87, 0x0A }, { ZD_CR89, 0x04 }, + { ZD_CR90, 0x58 }, /* 5112 */ + { ZD_CR91, 0x00 }, /* 5613 */ + { ZD_CR92, 0x0a }, + { ZD_CR98, 0x8d }, /* 4804, for 1212 new algorithm */ + { ZD_CR99, 0x00 }, { ZD_CR100, 0x02 }, { ZD_CR101, 0x13 }, + { ZD_CR102, 0x27 }, + { ZD_CR106, 0x20 }, /* change to 0x24 for AL7230B */ + { ZD_CR109, 0x13 }, /* 4804, for 1212 new algorithm */ + { ZD_CR112, 0x1f }, + }; + + static const struct zd_ioreq16 ioreqs_new_phy[] = { + { ZD_CR107, 0x28 }, + { ZD_CR110, 0x1f }, /* 5127, 0x13->0x1f */ + { ZD_CR111, 0x1f }, /* 0x13 to 0x1f for AL7230B */ + { ZD_CR116, 0x2a }, { ZD_CR118, 0xfa }, { ZD_CR119, 0x12 }, + { ZD_CR121, 0x6c }, /* 5613 */ + }; + + static const struct zd_ioreq16 ioreqs_old_phy[] = { + { ZD_CR107, 0x24 }, + { ZD_CR110, 0x13 }, /* 5127, 0x13->0x1f */ + { ZD_CR111, 0x13 }, /* 0x13 to 0x1f for AL7230B */ + { ZD_CR116, 0x24 }, { ZD_CR118, 0xfc }, { ZD_CR119, 0x11 }, + { ZD_CR121, 0x6a }, /* 5613 */ + }; + + static const struct zd_ioreq16 ioreqs_2[] = { + { ZD_CR113, 0x27 }, { ZD_CR114, 0x27 }, { ZD_CR115, 0x24 }, + { ZD_CR117, 0xfa }, { ZD_CR120, 0x4f }, + { ZD_CR122, 0xfc }, /* E0->FCh at 4901 */ + { ZD_CR123, 0x57 }, /* 5613 */ + { ZD_CR125, 0xad }, /* 4804, for 1212 new algorithm */ + { ZD_CR126, 0x6c }, /* 5613 */ + { ZD_CR127, 0x03 }, /* 4804, for 1212 new algorithm */ + { ZD_CR130, 0x10 }, + { ZD_CR131, 0x00 }, /* 5112 */ + { ZD_CR137, 0x50 }, /* 5613 */ + { ZD_CR138, 0xa8 }, /* 5112 */ + { ZD_CR144, 0xac }, /* 5613 */ + { ZD_CR148, 0x40 }, /* 5112 */ + { ZD_CR149, 0x40 }, /* 4O07, 50->40 */ + { ZD_CR150, 0x1a }, /* 5112, 0C->1A */ + { ZD_CR252, 0x34 }, { ZD_CR253, 0x34 }, + { ZD_CR251, 0x2f }, /* PLL_OFF */ + }; + + static const struct zd_ioreq16 ioreqs_3[] = { + { ZD_CR251, 0x7f }, /* PLL_ON */ + { ZD_CR128, 0x14 }, { ZD_CR129, 0x12 }, { ZD_CR130, 0x10 }, + { ZD_CR38, 0x38 }, { ZD_CR136, 0xdf }, + }; + + r = zd_iowrite16a_locked(chip, ioreqs_1, ARRAY_SIZE(ioreqs_1)); + if (r) + return r; + + if (chip->new_phy_layout) + r = zd_iowrite16a_locked(chip, ioreqs_new_phy, + ARRAY_SIZE(ioreqs_new_phy)); + else + r = zd_iowrite16a_locked(chip, ioreqs_old_phy, + ARRAY_SIZE(ioreqs_old_phy)); + if (r) + return r; + + r = zd_iowrite16a_locked(chip, ioreqs_2, ARRAY_SIZE(ioreqs_2)); + if (r) + return r; + + r = zd_rfwritev_cr_locked(chip, chan_rv[0], ARRAY_SIZE(chan_rv[0])); + if (r) + return r; + + r = zd_rfwritev_cr_locked(chip, std_rv, ARRAY_SIZE(std_rv)); + if (r) + return r; + + r = zd_rfwritev_cr_locked(chip, rv_init1, ARRAY_SIZE(rv_init1)); + if (r) + return r; + + r = zd_iowrite16a_locked(chip, ioreqs_3, ARRAY_SIZE(ioreqs_3)); + if (r) + return r; + + r = zd_rfwritev_cr_locked(chip, rv_init2, ARRAY_SIZE(rv_init2)); + if (r) + return r; + + return zd1211b_al7230b_finalize(chip); +} + +static int zd1211_al7230b_set_channel(struct zd_rf *rf, u8 channel) +{ + int r; + const u32 *rv = chan_rv[channel-1]; + struct zd_chip *chip = zd_rf_to_chip(rf); + + static const struct zd_ioreq16 ioreqs[] = { + /* PLL_ON */ + { ZD_CR251, 0x3f }, + { ZD_CR203, 0x06 }, { ZD_CR240, 0x08 }, + }; + + r = zd_iowrite16_locked(chip, 0x57, ZD_CR240); + if (r) + return r; + + /* PLL_OFF */ + r = zd_iowrite16_locked(chip, 0x2f, ZD_CR251); + if (r) + return r; + + r = zd_rfwritev_cr_locked(chip, std_rv, ARRAY_SIZE(std_rv)); + if (r) + return r; + + r = zd_rfwrite_cr_locked(chip, 0x3c9000); + if (r) + return r; + r = zd_rfwrite_cr_locked(chip, 0xf15d58); + if (r) + return r; + + r = zd_iowrite16a_locked(chip, ioreqs_sw, ARRAY_SIZE(ioreqs_sw)); + if (r) + return r; + + r = zd_rfwritev_cr_locked(chip, rv, 2); + if (r) + return r; + + r = zd_rfwrite_cr_locked(chip, 0x3c9000); + if (r) + return r; + + return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); +} + +static int zd1211b_al7230b_set_channel(struct zd_rf *rf, u8 channel) +{ + int r; + const u32 *rv = chan_rv[channel-1]; + struct zd_chip *chip = zd_rf_to_chip(rf); + + r = zd_iowrite16_locked(chip, 0x57, ZD_CR240); + if (r) + return r; + r = zd_iowrite16_locked(chip, 0xe4, ZD_CR9); + if (r) + return r; + + /* PLL_OFF */ + r = zd_iowrite16_locked(chip, 0x2f, ZD_CR251); + if (r) + return r; + r = zd_rfwritev_cr_locked(chip, std_rv, ARRAY_SIZE(std_rv)); + if (r) + return r; + + r = zd_rfwrite_cr_locked(chip, 0x3c9000); + if (r) + return r; + r = zd_rfwrite_cr_locked(chip, 0xf15d58); + if (r) + return r; + + r = zd_iowrite16a_locked(chip, ioreqs_sw, ARRAY_SIZE(ioreqs_sw)); + if (r) + return r; + + r = zd_rfwritev_cr_locked(chip, rv, 2); + if (r) + return r; + + r = zd_rfwrite_cr_locked(chip, 0x3c9000); + if (r) + return r; + + r = zd_iowrite16_locked(chip, 0x7f, ZD_CR251); + if (r) + return r; + + return zd1211b_al7230b_finalize(chip); +} + +static int zd1211_al7230b_switch_radio_on(struct zd_rf *rf) +{ + struct zd_chip *chip = zd_rf_to_chip(rf); + static const struct zd_ioreq16 ioreqs[] = { + { ZD_CR11, 0x00 }, + { ZD_CR251, 0x3f }, + }; + + return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); +} + +static int zd1211b_al7230b_switch_radio_on(struct zd_rf *rf) +{ + struct zd_chip *chip = zd_rf_to_chip(rf); + static const struct zd_ioreq16 ioreqs[] = { + { ZD_CR11, 0x00 }, + { ZD_CR251, 0x7f }, + }; + + return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); +} + +static int al7230b_switch_radio_off(struct zd_rf *rf) +{ + struct zd_chip *chip = zd_rf_to_chip(rf); + static const struct zd_ioreq16 ioreqs[] = { + { ZD_CR11, 0x04 }, + { ZD_CR251, 0x2f }, + }; + + return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); +} + +/* ZD1211B+AL7230B 6m band edge patching differs slightly from other + * configurations */ +static int zd1211b_al7230b_patch_6m(struct zd_rf *rf, u8 channel) +{ + struct zd_chip *chip = zd_rf_to_chip(rf); + struct zd_ioreq16 ioreqs[] = { + { ZD_CR128, 0x14 }, { ZD_CR129, 0x12 }, + }; + + /* FIXME: Channel 11 is not the edge for all regulatory domains. */ + if (channel == 1) { + ioreqs[0].value = 0x0e; + ioreqs[1].value = 0x10; + } else if (channel == 11) { + ioreqs[0].value = 0x10; + ioreqs[1].value = 0x10; + } + + dev_dbg_f(zd_chip_dev(chip), "patching for channel %d\n", channel); + return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); +} + +int zd_rf_init_al7230b(struct zd_rf *rf) +{ + struct zd_chip *chip = zd_rf_to_chip(rf); + + if (zd_chip_is_zd1211b(chip)) { + rf->init_hw = zd1211b_al7230b_init_hw; + rf->switch_radio_on = zd1211b_al7230b_switch_radio_on; + rf->set_channel = zd1211b_al7230b_set_channel; + rf->patch_6m_band_edge = zd1211b_al7230b_patch_6m; + } else { + rf->init_hw = zd1211_al7230b_init_hw; + rf->switch_radio_on = zd1211_al7230b_switch_radio_on; + rf->set_channel = zd1211_al7230b_set_channel; + rf->patch_6m_band_edge = zd_rf_generic_patch_6m; + rf->patch_cck_gain = 1; + } + + rf->switch_radio_off = al7230b_switch_radio_off; + + return 0; +} diff --git a/drivers/net/wireless/zydas/zd1211rw/zd_rf_rf2959.c b/drivers/net/wireless/zydas/zd1211rw/zd_rf_rf2959.c new file mode 100644 index 000000000..e4c1a8a52 --- /dev/null +++ b/drivers/net/wireless/zydas/zd1211rw/zd_rf_rf2959.c @@ -0,0 +1,269 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* ZD1211 USB-WLAN driver for Linux + * + * Copyright (C) 2005-2007 Ulrich Kunitz <kune@deine-taler.de> + * Copyright (C) 2006-2007 Daniel Drake <dsd@gentoo.org> + */ + +#include <linux/kernel.h> + +#include "zd_rf.h" +#include "zd_usb.h" +#include "zd_chip.h" + +static const u32 rf2959_table[][2] = { + RF_CHANNEL( 1) = { 0x181979, 0x1e6666 }, + RF_CHANNEL( 2) = { 0x181989, 0x1e6666 }, + RF_CHANNEL( 3) = { 0x181999, 0x1e6666 }, + RF_CHANNEL( 4) = { 0x1819a9, 0x1e6666 }, + RF_CHANNEL( 5) = { 0x1819b9, 0x1e6666 }, + RF_CHANNEL( 6) = { 0x1819c9, 0x1e6666 }, + RF_CHANNEL( 7) = { 0x1819d9, 0x1e6666 }, + RF_CHANNEL( 8) = { 0x1819e9, 0x1e6666 }, + RF_CHANNEL( 9) = { 0x1819f9, 0x1e6666 }, + RF_CHANNEL(10) = { 0x181a09, 0x1e6666 }, + RF_CHANNEL(11) = { 0x181a19, 0x1e6666 }, + RF_CHANNEL(12) = { 0x181a29, 0x1e6666 }, + RF_CHANNEL(13) = { 0x181a39, 0x1e6666 }, + RF_CHANNEL(14) = { 0x181a60, 0x1c0000 }, +}; + +#if 0 +static int bits(u32 rw, int from, int to) +{ + rw &= ~(0xffffffffU << (to+1)); + rw >>= from; + return rw; +} + +static int bit(u32 rw, int bit) +{ + return bits(rw, bit, bit); +} + +static void dump_regwrite(u32 rw) +{ + int reg = bits(rw, 18, 22); + int rw_flag = bits(rw, 23, 23); + PDEBUG("rf2959 %#010x reg %d rw %d", rw, reg, rw_flag); + + switch (reg) { + case 0: + PDEBUG("reg0 CFG1 ref_sel %d hibernate %d rf_vco_reg_en %d" + " if_vco_reg_en %d if_vga_en %d", + bits(rw, 14, 15), bit(rw, 3), bit(rw, 2), bit(rw, 1), + bit(rw, 0)); + break; + case 1: + PDEBUG("reg1 IFPLL1 pll_en1 %d kv_en1 %d vtc_en1 %d lpf1 %d" + " cpl1 %d pdp1 %d autocal_en1 %d ld_en1 %d ifloopr %d" + " ifloopc %d dac1 %d", + bit(rw, 17), bit(rw, 16), bit(rw, 15), bit(rw, 14), + bit(rw, 13), bit(rw, 12), bit(rw, 11), bit(rw, 10), + bits(rw, 7, 9), bits(rw, 4, 6), bits(rw, 0, 3)); + break; + case 2: + PDEBUG("reg2 IFPLL2 n1 %d num1 %d", + bits(rw, 6, 17), bits(rw, 0, 5)); + break; + case 3: + PDEBUG("reg3 IFPLL3 num %d", bits(rw, 0, 17)); + break; + case 4: + PDEBUG("reg4 IFPLL4 dn1 %#04x ct_def1 %d kv_def1 %d", + bits(rw, 8, 16), bits(rw, 4, 7), bits(rw, 0, 3)); + break; + case 5: + PDEBUG("reg5 RFPLL1 pll_en %d kv_en %d vtc_en %d lpf %d cpl %d" + " pdp %d autocal_en %d ld_en %d rfloopr %d rfloopc %d" + " dac %d", + bit(rw, 17), bit(rw, 16), bit(rw, 15), bit(rw, 14), + bit(rw, 13), bit(rw, 12), bit(rw, 11), bit(rw, 10), + bits(rw, 7, 9), bits(rw, 4, 6), bits(rw, 0,3)); + break; + case 6: + PDEBUG("reg6 RFPLL2 n %d num %d", + bits(rw, 6, 17), bits(rw, 0, 5)); + break; + case 7: + PDEBUG("reg7 RFPLL3 num2 %d", bits(rw, 0, 17)); + break; + case 8: + PDEBUG("reg8 RFPLL4 dn %#06x ct_def %d kv_def %d", + bits(rw, 8, 16), bits(rw, 4, 7), bits(rw, 0, 3)); + break; + case 9: + PDEBUG("reg9 CAL1 tvco %d tlock %d m_ct_value %d ld_window %d", + bits(rw, 13, 17), bits(rw, 8, 12), bits(rw, 3, 7), + bits(rw, 0, 2)); + break; + case 10: + PDEBUG("reg10 TXRX1 rxdcfbbyps %d pcontrol %d txvgc %d" + " rxlpfbw %d txlpfbw %d txdiffmode %d txenmode %d" + " intbiasen %d tybypass %d", + bit(rw, 17), bits(rw, 15, 16), bits(rw, 10, 14), + bits(rw, 7, 9), bits(rw, 4, 6), bit(rw, 3), bit(rw, 2), + bit(rw, 1), bit(rw, 0)); + break; + case 11: + PDEBUG("reg11 PCNT1 mid_bias %d p_desired %d pc_offset %d" + " tx_delay %d", + bits(rw, 15, 17), bits(rw, 9, 14), bits(rw, 3, 8), + bits(rw, 0, 2)); + break; + case 12: + PDEBUG("reg12 PCNT2 max_power %d mid_power %d min_power %d", + bits(rw, 12, 17), bits(rw, 6, 11), bits(rw, 0, 5)); + break; + case 13: + PDEBUG("reg13 VCOT1 rfpll vco comp %d ifpll vco comp %d" + " lobias %d if_biasbuf %d if_biasvco %d rf_biasbuf %d" + " rf_biasvco %d", + bit(rw, 17), bit(rw, 16), bit(rw, 15), + bits(rw, 8, 9), bits(rw, 5, 7), bits(rw, 3, 4), + bits(rw, 0, 2)); + break; + case 14: + PDEBUG("reg14 IQCAL rx_acal %d rx_pcal %d" + " tx_acal %d tx_pcal %d", + bits(rw, 13, 17), bits(rw, 9, 12), bits(rw, 4, 8), + bits(rw, 0, 3)); + break; + } +} +#endif /* 0 */ + +static int rf2959_init_hw(struct zd_rf *rf) +{ + int r; + struct zd_chip *chip = zd_rf_to_chip(rf); + + static const struct zd_ioreq16 ioreqs[] = { + { ZD_CR2, 0x1E }, { ZD_CR9, 0x20 }, { ZD_CR10, 0x89 }, + { ZD_CR11, 0x00 }, { ZD_CR15, 0xD0 }, { ZD_CR17, 0x68 }, + { ZD_CR19, 0x4a }, { ZD_CR20, 0x0c }, { ZD_CR21, 0x0E }, + { ZD_CR23, 0x48 }, + /* normal size for cca threshold */ + { ZD_CR24, 0x14 }, + /* { ZD_CR24, 0x20 }, */ + { ZD_CR26, 0x90 }, { ZD_CR27, 0x30 }, { ZD_CR29, 0x20 }, + { ZD_CR31, 0xb2 }, { ZD_CR32, 0x43 }, { ZD_CR33, 0x28 }, + { ZD_CR38, 0x30 }, { ZD_CR34, 0x0f }, { ZD_CR35, 0xF0 }, + { ZD_CR41, 0x2a }, { ZD_CR46, 0x7F }, { ZD_CR47, 0x1E }, + { ZD_CR51, 0xc5 }, { ZD_CR52, 0xc5 }, { ZD_CR53, 0xc5 }, + { ZD_CR79, 0x58 }, { ZD_CR80, 0x30 }, { ZD_CR81, 0x30 }, + { ZD_CR82, 0x00 }, { ZD_CR83, 0x24 }, { ZD_CR84, 0x04 }, + { ZD_CR85, 0x00 }, { ZD_CR86, 0x10 }, { ZD_CR87, 0x2A }, + { ZD_CR88, 0x10 }, { ZD_CR89, 0x24 }, { ZD_CR90, 0x18 }, + /* { ZD_CR91, 0x18 }, */ + /* should solve continuous CTS frame problems */ + { ZD_CR91, 0x00 }, + { ZD_CR92, 0x0a }, { ZD_CR93, 0x00 }, { ZD_CR94, 0x01 }, + { ZD_CR95, 0x00 }, { ZD_CR96, 0x40 }, { ZD_CR97, 0x37 }, + { ZD_CR98, 0x05 }, { ZD_CR99, 0x28 }, { ZD_CR100, 0x00 }, + { ZD_CR101, 0x13 }, { ZD_CR102, 0x27 }, { ZD_CR103, 0x27 }, + { ZD_CR104, 0x18 }, { ZD_CR105, 0x12 }, + /* normal size */ + { ZD_CR106, 0x1a }, + /* { ZD_CR106, 0x22 }, */ + { ZD_CR107, 0x24 }, { ZD_CR108, 0x0a }, { ZD_CR109, 0x13 }, + { ZD_CR110, 0x2F }, { ZD_CR111, 0x27 }, { ZD_CR112, 0x27 }, + { ZD_CR113, 0x27 }, { ZD_CR114, 0x27 }, { ZD_CR115, 0x40 }, + { ZD_CR116, 0x40 }, { ZD_CR117, 0xF0 }, { ZD_CR118, 0xF0 }, + { ZD_CR119, 0x16 }, + /* no TX continuation */ + { ZD_CR122, 0x00 }, + /* { ZD_CR122, 0xff }, */ + { ZD_CR127, 0x03 }, { ZD_CR131, 0x08 }, { ZD_CR138, 0x28 }, + { ZD_CR148, 0x44 }, { ZD_CR150, 0x10 }, { ZD_CR169, 0xBB }, + { ZD_CR170, 0xBB }, + }; + + static const u32 rv[] = { + 0x000007, /* REG0(CFG1) */ + 0x07dd43, /* REG1(IFPLL1) */ + 0x080959, /* REG2(IFPLL2) */ + 0x0e6666, + 0x116a57, /* REG4 */ + 0x17dd43, /* REG5 */ + 0x1819f9, /* REG6 */ + 0x1e6666, + 0x214554, + 0x25e7fa, + 0x27fffa, + /* The Zydas driver somehow forgets to set this value. It's + * only set for Japan. We are using internal power control + * for now. + */ + 0x294128, /* internal power */ + /* 0x28252c, */ /* External control TX power */ + /* ZD_CR31_CCK, ZD_CR51_6-36M, ZD_CR52_48M, ZD_CR53_54M */ + 0x2c0000, + 0x300000, + 0x340000, /* REG13(0xD) */ + 0x381e0f, /* REG14(0xE) */ + /* Bogus, RF2959's data sheet doesn't know register 27, which is + * actually referenced here. The commented 0x11 is 17. + */ + 0x6c180f, /* REG27(0x11) */ + }; + + r = zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); + if (r) + return r; + + return zd_rfwritev_locked(chip, rv, ARRAY_SIZE(rv), RF_RV_BITS); +} + +static int rf2959_set_channel(struct zd_rf *rf, u8 channel) +{ + int i, r; + const u32 *rv = rf2959_table[channel-1]; + struct zd_chip *chip = zd_rf_to_chip(rf); + + for (i = 0; i < 2; i++) { + r = zd_rfwrite_locked(chip, rv[i], RF_RV_BITS); + if (r) + return r; + } + return 0; +} + +static int rf2959_switch_radio_on(struct zd_rf *rf) +{ + static const struct zd_ioreq16 ioreqs[] = { + { ZD_CR10, 0x89 }, + { ZD_CR11, 0x00 }, + }; + struct zd_chip *chip = zd_rf_to_chip(rf); + + return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); +} + +static int rf2959_switch_radio_off(struct zd_rf *rf) +{ + static const struct zd_ioreq16 ioreqs[] = { + { ZD_CR10, 0x15 }, + { ZD_CR11, 0x81 }, + }; + struct zd_chip *chip = zd_rf_to_chip(rf); + + return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); +} + +int zd_rf_init_rf2959(struct zd_rf *rf) +{ + struct zd_chip *chip = zd_rf_to_chip(rf); + + if (zd_chip_is_zd1211b(chip)) { + dev_err(zd_chip_dev(chip), + "RF2959 is currently not supported for ZD1211B" + " devices\n"); + return -ENODEV; + } + rf->init_hw = rf2959_init_hw; + rf->set_channel = rf2959_set_channel; + rf->switch_radio_on = rf2959_switch_radio_on; + rf->switch_radio_off = rf2959_switch_radio_off; + return 0; +} diff --git a/drivers/net/wireless/zydas/zd1211rw/zd_rf_uw2453.c b/drivers/net/wireless/zydas/zd1211rw/zd_rf_uw2453.c new file mode 100644 index 000000000..a4e7f187d --- /dev/null +++ b/drivers/net/wireless/zydas/zd1211rw/zd_rf_uw2453.c @@ -0,0 +1,527 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* ZD1211 USB-WLAN driver for Linux + * + * Copyright (C) 2005-2007 Ulrich Kunitz <kune@deine-taler.de> + * Copyright (C) 2006-2007 Daniel Drake <dsd@gentoo.org> + */ + +#include <linux/kernel.h> +#include <linux/slab.h> + +#include "zd_rf.h" +#include "zd_usb.h" +#include "zd_chip.h" + +/* This RF programming code is based upon the code found in v2.16.0.0 of the + * ZyDAS vendor driver. Unlike other RF's, Ubec publish full technical specs + * for this RF on their website, so we're able to understand more than + * usual as to what is going on. Thumbs up for Ubec for doing that. */ + +/* The 3-wire serial interface provides access to 8 write-only registers. + * The data format is a 4 bit register address followed by a 20 bit value. */ +#define UW2453_REGWRITE(reg, val) ((((reg) & 0xf) << 20) | ((val) & 0xfffff)) + +/* For channel tuning, we have to configure registers 1 (synthesizer), 2 (synth + * fractional divide ratio) and 3 (VCO config). + * + * We configure the RF to produce an interrupt when the PLL is locked onto + * the configured frequency. During initialization, we run through a variety + * of different VCO configurations on channel 1 until we detect a PLL lock. + * When this happens, we remember which VCO configuration produced the lock + * and use it later. Actually, we use the configuration *after* the one that + * produced the lock, which seems odd, but it works. + * + * If we do not see a PLL lock on any standard VCO config, we fall back on an + * autocal configuration, which has a fixed (as opposed to per-channel) VCO + * config and different synth values from the standard set (divide ratio + * is still shared with the standard set). */ + +/* The per-channel synth values for all standard VCO configurations. These get + * written to register 1. */ +static const u8 uw2453_std_synth[] = { + RF_CHANNEL( 1) = 0x47, + RF_CHANNEL( 2) = 0x47, + RF_CHANNEL( 3) = 0x67, + RF_CHANNEL( 4) = 0x67, + RF_CHANNEL( 5) = 0x67, + RF_CHANNEL( 6) = 0x67, + RF_CHANNEL( 7) = 0x57, + RF_CHANNEL( 8) = 0x57, + RF_CHANNEL( 9) = 0x57, + RF_CHANNEL(10) = 0x57, + RF_CHANNEL(11) = 0x77, + RF_CHANNEL(12) = 0x77, + RF_CHANNEL(13) = 0x77, + RF_CHANNEL(14) = 0x4f, +}; + +/* This table stores the synthesizer fractional divide ratio for *all* VCO + * configurations (both standard and autocal). These get written to register 2. + */ +static const u16 uw2453_synth_divide[] = { + RF_CHANNEL( 1) = 0x999, + RF_CHANNEL( 2) = 0x99b, + RF_CHANNEL( 3) = 0x998, + RF_CHANNEL( 4) = 0x99a, + RF_CHANNEL( 5) = 0x999, + RF_CHANNEL( 6) = 0x99b, + RF_CHANNEL( 7) = 0x998, + RF_CHANNEL( 8) = 0x99a, + RF_CHANNEL( 9) = 0x999, + RF_CHANNEL(10) = 0x99b, + RF_CHANNEL(11) = 0x998, + RF_CHANNEL(12) = 0x99a, + RF_CHANNEL(13) = 0x999, + RF_CHANNEL(14) = 0xccc, +}; + +/* Here is the data for all the standard VCO configurations. We shrink our + * table a little by observing that both channels in a consecutive pair share + * the same value. We also observe that the high 4 bits ([0:3] in the specs) + * are all 'Reserved' and are always set to 0x4 - we chop them off in the data + * below. */ +#define CHAN_TO_PAIRIDX(a) ((a - 1) / 2) +#define RF_CHANPAIR(a,b) [CHAN_TO_PAIRIDX(a)] +static const u16 uw2453_std_vco_cfg[][7] = { + { /* table 1 */ + RF_CHANPAIR( 1, 2) = 0x664d, + RF_CHANPAIR( 3, 4) = 0x604d, + RF_CHANPAIR( 5, 6) = 0x6675, + RF_CHANPAIR( 7, 8) = 0x6475, + RF_CHANPAIR( 9, 10) = 0x6655, + RF_CHANPAIR(11, 12) = 0x6455, + RF_CHANPAIR(13, 14) = 0x6665, + }, + { /* table 2 */ + RF_CHANPAIR( 1, 2) = 0x666d, + RF_CHANPAIR( 3, 4) = 0x606d, + RF_CHANPAIR( 5, 6) = 0x664d, + RF_CHANPAIR( 7, 8) = 0x644d, + RF_CHANPAIR( 9, 10) = 0x6675, + RF_CHANPAIR(11, 12) = 0x6475, + RF_CHANPAIR(13, 14) = 0x6655, + }, + { /* table 3 */ + RF_CHANPAIR( 1, 2) = 0x665d, + RF_CHANPAIR( 3, 4) = 0x605d, + RF_CHANPAIR( 5, 6) = 0x666d, + RF_CHANPAIR( 7, 8) = 0x646d, + RF_CHANPAIR( 9, 10) = 0x664d, + RF_CHANPAIR(11, 12) = 0x644d, + RF_CHANPAIR(13, 14) = 0x6675, + }, + { /* table 4 */ + RF_CHANPAIR( 1, 2) = 0x667d, + RF_CHANPAIR( 3, 4) = 0x607d, + RF_CHANPAIR( 5, 6) = 0x665d, + RF_CHANPAIR( 7, 8) = 0x645d, + RF_CHANPAIR( 9, 10) = 0x666d, + RF_CHANPAIR(11, 12) = 0x646d, + RF_CHANPAIR(13, 14) = 0x664d, + }, + { /* table 5 */ + RF_CHANPAIR( 1, 2) = 0x6643, + RF_CHANPAIR( 3, 4) = 0x6043, + RF_CHANPAIR( 5, 6) = 0x667d, + RF_CHANPAIR( 7, 8) = 0x647d, + RF_CHANPAIR( 9, 10) = 0x665d, + RF_CHANPAIR(11, 12) = 0x645d, + RF_CHANPAIR(13, 14) = 0x666d, + }, + { /* table 6 */ + RF_CHANPAIR( 1, 2) = 0x6663, + RF_CHANPAIR( 3, 4) = 0x6063, + RF_CHANPAIR( 5, 6) = 0x6643, + RF_CHANPAIR( 7, 8) = 0x6443, + RF_CHANPAIR( 9, 10) = 0x667d, + RF_CHANPAIR(11, 12) = 0x647d, + RF_CHANPAIR(13, 14) = 0x665d, + }, + { /* table 7 */ + RF_CHANPAIR( 1, 2) = 0x6653, + RF_CHANPAIR( 3, 4) = 0x6053, + RF_CHANPAIR( 5, 6) = 0x6663, + RF_CHANPAIR( 7, 8) = 0x6463, + RF_CHANPAIR( 9, 10) = 0x6643, + RF_CHANPAIR(11, 12) = 0x6443, + RF_CHANPAIR(13, 14) = 0x667d, + }, + { /* table 8 */ + RF_CHANPAIR( 1, 2) = 0x6673, + RF_CHANPAIR( 3, 4) = 0x6073, + RF_CHANPAIR( 5, 6) = 0x6653, + RF_CHANPAIR( 7, 8) = 0x6453, + RF_CHANPAIR( 9, 10) = 0x6663, + RF_CHANPAIR(11, 12) = 0x6463, + RF_CHANPAIR(13, 14) = 0x6643, + }, + { /* table 9 */ + RF_CHANPAIR( 1, 2) = 0x664b, + RF_CHANPAIR( 3, 4) = 0x604b, + RF_CHANPAIR( 5, 6) = 0x6673, + RF_CHANPAIR( 7, 8) = 0x6473, + RF_CHANPAIR( 9, 10) = 0x6653, + RF_CHANPAIR(11, 12) = 0x6453, + RF_CHANPAIR(13, 14) = 0x6663, + }, + { /* table 10 */ + RF_CHANPAIR( 1, 2) = 0x666b, + RF_CHANPAIR( 3, 4) = 0x606b, + RF_CHANPAIR( 5, 6) = 0x664b, + RF_CHANPAIR( 7, 8) = 0x644b, + RF_CHANPAIR( 9, 10) = 0x6673, + RF_CHANPAIR(11, 12) = 0x6473, + RF_CHANPAIR(13, 14) = 0x6653, + }, + { /* table 11 */ + RF_CHANPAIR( 1, 2) = 0x665b, + RF_CHANPAIR( 3, 4) = 0x605b, + RF_CHANPAIR( 5, 6) = 0x666b, + RF_CHANPAIR( 7, 8) = 0x646b, + RF_CHANPAIR( 9, 10) = 0x664b, + RF_CHANPAIR(11, 12) = 0x644b, + RF_CHANPAIR(13, 14) = 0x6673, + }, + +}; + +/* The per-channel synth values for autocal. These get written to register 1. */ +static const u16 uw2453_autocal_synth[] = { + RF_CHANNEL( 1) = 0x6847, + RF_CHANNEL( 2) = 0x6847, + RF_CHANNEL( 3) = 0x6867, + RF_CHANNEL( 4) = 0x6867, + RF_CHANNEL( 5) = 0x6867, + RF_CHANNEL( 6) = 0x6867, + RF_CHANNEL( 7) = 0x6857, + RF_CHANNEL( 8) = 0x6857, + RF_CHANNEL( 9) = 0x6857, + RF_CHANNEL(10) = 0x6857, + RF_CHANNEL(11) = 0x6877, + RF_CHANNEL(12) = 0x6877, + RF_CHANNEL(13) = 0x6877, + RF_CHANNEL(14) = 0x684f, +}; + +/* The VCO configuration for autocal (all channels) */ +static const u16 UW2453_AUTOCAL_VCO_CFG = 0x6662; + +/* TX gain settings. The array index corresponds to the TX power integration + * values found in the EEPROM. The values get written to register 7. */ +static u32 uw2453_txgain[] = { + [0x00] = 0x0e313, + [0x01] = 0x0fb13, + [0x02] = 0x0e093, + [0x03] = 0x0f893, + [0x04] = 0x0ea93, + [0x05] = 0x1f093, + [0x06] = 0x1f493, + [0x07] = 0x1f693, + [0x08] = 0x1f393, + [0x09] = 0x1f35b, + [0x0a] = 0x1e6db, + [0x0b] = 0x1ff3f, + [0x0c] = 0x1ffff, + [0x0d] = 0x361d7, + [0x0e] = 0x37fbf, + [0x0f] = 0x3ff8b, + [0x10] = 0x3ff33, + [0x11] = 0x3fb3f, + [0x12] = 0x3ffff, +}; + +/* RF-specific structure */ +struct uw2453_priv { + /* index into synth/VCO config tables where PLL lock was found + * -1 means autocal */ + int config; +}; + +#define UW2453_PRIV(rf) ((struct uw2453_priv *) (rf)->priv) + +static int uw2453_synth_set_channel(struct zd_chip *chip, int channel, + bool autocal) +{ + int r; + int idx = channel - 1; + u32 val; + + if (autocal) + val = UW2453_REGWRITE(1, uw2453_autocal_synth[idx]); + else + val = UW2453_REGWRITE(1, uw2453_std_synth[idx]); + + r = zd_rfwrite_locked(chip, val, RF_RV_BITS); + if (r) + return r; + + return zd_rfwrite_locked(chip, + UW2453_REGWRITE(2, uw2453_synth_divide[idx]), RF_RV_BITS); +} + +static int uw2453_write_vco_cfg(struct zd_chip *chip, u16 value) +{ + /* vendor driver always sets these upper bits even though the specs say + * they are reserved */ + u32 val = 0x40000 | value; + return zd_rfwrite_locked(chip, UW2453_REGWRITE(3, val), RF_RV_BITS); +} + +static int uw2453_init_mode(struct zd_chip *chip) +{ + static const u32 rv[] = { + UW2453_REGWRITE(0, 0x25f98), /* enter IDLE mode */ + UW2453_REGWRITE(0, 0x25f9a), /* enter CAL_VCO mode */ + UW2453_REGWRITE(0, 0x25f94), /* enter RX/TX mode */ + UW2453_REGWRITE(0, 0x27fd4), /* power down RSSI circuit */ + }; + + return zd_rfwritev_locked(chip, rv, ARRAY_SIZE(rv), RF_RV_BITS); +} + +static int uw2453_set_tx_gain_level(struct zd_chip *chip, int channel) +{ + u8 int_value = chip->pwr_int_values[channel - 1]; + + if (int_value >= ARRAY_SIZE(uw2453_txgain)) { + dev_dbg_f(zd_chip_dev(chip), "can't configure TX gain for " + "int value %x on channel %d\n", int_value, channel); + return 0; + } + + return zd_rfwrite_locked(chip, + UW2453_REGWRITE(7, uw2453_txgain[int_value]), RF_RV_BITS); +} + +static int uw2453_init_hw(struct zd_rf *rf) +{ + int i, r; + int found_config = -1; + u16 intr_status; + struct zd_chip *chip = zd_rf_to_chip(rf); + + static const struct zd_ioreq16 ioreqs[] = { + { ZD_CR10, 0x89 }, { ZD_CR15, 0x20 }, + { ZD_CR17, 0x28 }, /* 6112 no change */ + { ZD_CR23, 0x38 }, { ZD_CR24, 0x20 }, { ZD_CR26, 0x93 }, + { ZD_CR27, 0x15 }, { ZD_CR28, 0x3e }, { ZD_CR29, 0x00 }, + { ZD_CR33, 0x28 }, { ZD_CR34, 0x30 }, + { ZD_CR35, 0x43 }, /* 6112 3e->43 */ + { ZD_CR41, 0x24 }, { ZD_CR44, 0x32 }, + { ZD_CR46, 0x92 }, /* 6112 96->92 */ + { ZD_CR47, 0x1e }, + { ZD_CR48, 0x04 }, /* 5602 Roger */ + { ZD_CR49, 0xfa }, { ZD_CR79, 0x58 }, { ZD_CR80, 0x30 }, + { ZD_CR81, 0x30 }, { ZD_CR87, 0x0a }, { ZD_CR89, 0x04 }, + { ZD_CR91, 0x00 }, { ZD_CR92, 0x0a }, { ZD_CR98, 0x8d }, + { ZD_CR99, 0x28 }, { ZD_CR100, 0x02 }, + { ZD_CR101, 0x09 }, /* 6112 13->1f 6220 1f->13 6407 13->9 */ + { ZD_CR102, 0x27 }, + { ZD_CR106, 0x1c }, /* 5d07 5112 1f->1c 6220 1c->1f + * 6221 1f->1c + */ + { ZD_CR107, 0x1c }, /* 6220 1c->1a 5221 1a->1c */ + { ZD_CR109, 0x13 }, + { ZD_CR110, 0x1f }, /* 6112 13->1f 6221 1f->13 6407 13->0x09 */ + { ZD_CR111, 0x13 }, { ZD_CR112, 0x1f }, { ZD_CR113, 0x27 }, + { ZD_CR114, 0x23 }, /* 6221 27->23 */ + { ZD_CR115, 0x24 }, /* 6112 24->1c 6220 1c->24 */ + { ZD_CR116, 0x24 }, /* 6220 1c->24 */ + { ZD_CR117, 0xfa }, /* 6112 fa->f8 6220 f8->f4 6220 f4->fa */ + { ZD_CR118, 0xf0 }, /* 5d07 6112 f0->f2 6220 f2->f0 */ + { ZD_CR119, 0x1a }, /* 6112 1a->10 6220 10->14 6220 14->1a */ + { ZD_CR120, 0x4f }, + { ZD_CR121, 0x1f }, /* 6220 4f->1f */ + { ZD_CR122, 0xf0 }, { ZD_CR123, 0x57 }, { ZD_CR125, 0xad }, + { ZD_CR126, 0x6c }, { ZD_CR127, 0x03 }, + { ZD_CR128, 0x14 }, /* 6302 12->11 */ + { ZD_CR129, 0x12 }, /* 6301 10->0f */ + { ZD_CR130, 0x10 }, { ZD_CR137, 0x50 }, { ZD_CR138, 0xa8 }, + { ZD_CR144, 0xac }, { ZD_CR146, 0x20 }, { ZD_CR252, 0xff }, + { ZD_CR253, 0xff }, + }; + + static const u32 rv[] = { + UW2453_REGWRITE(4, 0x2b), /* configure receiver gain */ + UW2453_REGWRITE(5, 0x19e4f), /* configure transmitter gain */ + UW2453_REGWRITE(6, 0xf81ad), /* enable RX/TX filter tuning */ + UW2453_REGWRITE(7, 0x3fffe), /* disable TX gain in test mode */ + + /* enter CAL_FIL mode, TX gain set by registers, RX gain set by pins, + * RSSI circuit powered down, reduced RSSI range */ + UW2453_REGWRITE(0, 0x25f9c), /* 5d01 cal_fil */ + + /* synthesizer configuration for channel 1 */ + UW2453_REGWRITE(1, 0x47), + UW2453_REGWRITE(2, 0x999), + + /* disable manual VCO band selection */ + UW2453_REGWRITE(3, 0x7602), + + /* enable manual VCO band selection, configure current level */ + UW2453_REGWRITE(3, 0x46063), + }; + + r = zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); + if (r) + return r; + + r = zd_rfwritev_locked(chip, rv, ARRAY_SIZE(rv), RF_RV_BITS); + if (r) + return r; + + r = uw2453_init_mode(chip); + if (r) + return r; + + /* Try all standard VCO configuration settings on channel 1 */ + for (i = 0; i < ARRAY_SIZE(uw2453_std_vco_cfg) - 1; i++) { + /* Configure synthesizer for channel 1 */ + r = uw2453_synth_set_channel(chip, 1, false); + if (r) + return r; + + /* Write VCO config */ + r = uw2453_write_vco_cfg(chip, uw2453_std_vco_cfg[i][0]); + if (r) + return r; + + /* ack interrupt event */ + r = zd_iowrite16_locked(chip, 0x0f, UW2453_INTR_REG); + if (r) + return r; + + /* check interrupt status */ + r = zd_ioread16_locked(chip, &intr_status, UW2453_INTR_REG); + if (r) + return r; + + if (!(intr_status & 0xf)) { + dev_dbg_f(zd_chip_dev(chip), + "PLL locked on configuration %d\n", i); + found_config = i; + break; + } + } + + if (found_config == -1) { + /* autocal */ + dev_dbg_f(zd_chip_dev(chip), + "PLL did not lock, using autocal\n"); + + r = uw2453_synth_set_channel(chip, 1, true); + if (r) + return r; + + r = uw2453_write_vco_cfg(chip, UW2453_AUTOCAL_VCO_CFG); + if (r) + return r; + } + + /* To match the vendor driver behaviour, we use the configuration after + * the one that produced a lock. */ + UW2453_PRIV(rf)->config = found_config + 1; + + return zd_iowrite16_locked(chip, 0x06, ZD_CR203); +} + +static int uw2453_set_channel(struct zd_rf *rf, u8 channel) +{ + int r; + u16 vco_cfg; + int config = UW2453_PRIV(rf)->config; + bool autocal = (config == -1); + struct zd_chip *chip = zd_rf_to_chip(rf); + + static const struct zd_ioreq16 ioreqs[] = { + { ZD_CR80, 0x30 }, { ZD_CR81, 0x30 }, { ZD_CR79, 0x58 }, + { ZD_CR12, 0xf0 }, { ZD_CR77, 0x1b }, { ZD_CR78, 0x58 }, + }; + + r = uw2453_synth_set_channel(chip, channel, autocal); + if (r) + return r; + + if (autocal) + vco_cfg = UW2453_AUTOCAL_VCO_CFG; + else + vco_cfg = uw2453_std_vco_cfg[config][CHAN_TO_PAIRIDX(channel)]; + + r = uw2453_write_vco_cfg(chip, vco_cfg); + if (r) + return r; + + r = uw2453_init_mode(chip); + if (r) + return r; + + r = zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); + if (r) + return r; + + r = uw2453_set_tx_gain_level(chip, channel); + if (r) + return r; + + return zd_iowrite16_locked(chip, 0x06, ZD_CR203); +} + +static int uw2453_switch_radio_on(struct zd_rf *rf) +{ + int r; + struct zd_chip *chip = zd_rf_to_chip(rf); + struct zd_ioreq16 ioreqs[] = { + { ZD_CR11, 0x00 }, { ZD_CR251, 0x3f }, + }; + + /* enter RXTX mode */ + r = zd_rfwrite_locked(chip, UW2453_REGWRITE(0, 0x25f94), RF_RV_BITS); + if (r) + return r; + + if (zd_chip_is_zd1211b(chip)) + ioreqs[1].value = 0x7f; + + return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); +} + +static int uw2453_switch_radio_off(struct zd_rf *rf) +{ + int r; + struct zd_chip *chip = zd_rf_to_chip(rf); + static const struct zd_ioreq16 ioreqs[] = { + { ZD_CR11, 0x04 }, { ZD_CR251, 0x2f }, + }; + + /* enter IDLE mode */ + /* FIXME: shouldn't we go to SLEEP? sent email to zydas */ + r = zd_rfwrite_locked(chip, UW2453_REGWRITE(0, 0x25f90), RF_RV_BITS); + if (r) + return r; + + return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); +} + +static void uw2453_clear(struct zd_rf *rf) +{ + kfree(rf->priv); +} + +int zd_rf_init_uw2453(struct zd_rf *rf) +{ + rf->init_hw = uw2453_init_hw; + rf->set_channel = uw2453_set_channel; + rf->switch_radio_on = uw2453_switch_radio_on; + rf->switch_radio_off = uw2453_switch_radio_off; + rf->patch_6m_band_edge = zd_rf_generic_patch_6m; + rf->clear = uw2453_clear; + /* we have our own TX integration code */ + rf->update_channel_int = 0; + + rf->priv = kmalloc(sizeof(struct uw2453_priv), GFP_KERNEL); + if (rf->priv == NULL) + return -ENOMEM; + + return 0; +} + diff --git a/drivers/net/wireless/zydas/zd1211rw/zd_usb.c b/drivers/net/wireless/zydas/zd1211rw/zd_usb.c new file mode 100644 index 000000000..66367ab7e --- /dev/null +++ b/drivers/net/wireless/zydas/zd1211rw/zd_usb.c @@ -0,0 +1,2046 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* ZD1211 USB-WLAN driver for Linux + * + * Copyright (C) 2005-2007 Ulrich Kunitz <kune@deine-taler.de> + * Copyright (C) 2006-2007 Daniel Drake <dsd@gentoo.org> + * Copyright (C) 2006-2007 Michael Wu <flamingice@sourmilk.net> + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/firmware.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/skbuff.h> +#include <linux/usb.h> +#include <linux/workqueue.h> +#include <linux/module.h> +#include <net/mac80211.h> +#include <asm/unaligned.h> + +#include "zd_def.h" +#include "zd_mac.h" +#include "zd_usb.h" + +static const struct usb_device_id usb_ids[] = { + /* ZD1211 */ + { USB_DEVICE(0x0105, 0x145f), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x0586, 0x3401), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x0586, 0x3402), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x0586, 0x3407), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x0586, 0x3409), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x079b, 0x004a), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x07b8, 0x6001), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x0ace, 0x1211), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x0ace, 0xa211), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x0b05, 0x170c), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x0b3b, 0x1630), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x0b3b, 0x5630), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x0df6, 0x9071), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x0df6, 0x9075), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x126f, 0xa006), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x129b, 0x1666), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x13b1, 0x001e), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x1435, 0x0711), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x14ea, 0xab10), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x14ea, 0xab13), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x157e, 0x300a), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x157e, 0x300b), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x157e, 0x3204), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x157e, 0x3207), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x1740, 0x2000), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x6891, 0xa727), .driver_info = DEVICE_ZD1211 }, + /* ZD1211B */ + { USB_DEVICE(0x0053, 0x5301), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x0409, 0x0248), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x0411, 0x00da), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x0471, 0x1236), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x0471, 0x1237), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x050d, 0x705c), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x054c, 0x0257), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x0586, 0x340a), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x0586, 0x340f), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x0586, 0x3410), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x0586, 0x3412), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x0586, 0x3413), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x079b, 0x0062), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x07b8, 0x6001), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x07fa, 0x1196), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x083a, 0x4505), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x083a, 0xe501), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x083a, 0xe503), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x083a, 0xe506), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x0ace, 0x1215), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x0ace, 0xb215), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x0b05, 0x171b), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x0baf, 0x0121), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x0cde, 0x001a), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x0df6, 0x0036), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x129b, 0x1667), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x13b1, 0x0024), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x157e, 0x300d), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x1582, 0x6003), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x2019, 0x5303), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x2019, 0xed01), .driver_info = DEVICE_ZD1211B }, + /* "Driverless" devices that need ejecting */ + { USB_DEVICE(0x0ace, 0x2011), .driver_info = DEVICE_INSTALLER }, + { USB_DEVICE(0x0ace, 0x20ff), .driver_info = DEVICE_INSTALLER }, + {} +}; + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("USB driver for devices with the ZD1211 chip."); +MODULE_AUTHOR("Ulrich Kunitz"); +MODULE_AUTHOR("Daniel Drake"); +MODULE_VERSION("1.0"); +MODULE_DEVICE_TABLE(usb, usb_ids); + +#define FW_ZD1211_PREFIX "zd1211/zd1211_" +#define FW_ZD1211B_PREFIX "zd1211/zd1211b_" + +static bool check_read_regs(struct zd_usb *usb, struct usb_req_read_regs *req, + unsigned int count); + +/* USB device initialization */ +static void int_urb_complete(struct urb *urb); + +static int request_fw_file( + const struct firmware **fw, const char *name, struct device *device) +{ + int r; + + dev_dbg_f(device, "fw name %s\n", name); + + r = request_firmware(fw, name, device); + if (r) + dev_err(device, + "Could not load firmware file %s. Error number %d\n", + name, r); + return r; +} + +static inline u16 get_bcdDevice(const struct usb_device *udev) +{ + return le16_to_cpu(udev->descriptor.bcdDevice); +} + +enum upload_code_flags { + REBOOT = 1, +}; + +/* Ensures that MAX_TRANSFER_SIZE is even. */ +#define MAX_TRANSFER_SIZE (USB_MAX_TRANSFER_SIZE & ~1) + +static int upload_code(struct usb_device *udev, + const u8 *data, size_t size, u16 code_offset, int flags) +{ + u8 *p; + int r; + + /* USB request blocks need "kmalloced" buffers. + */ + p = kmalloc(MAX_TRANSFER_SIZE, GFP_KERNEL); + if (!p) { + r = -ENOMEM; + goto error; + } + + size &= ~1; + while (size > 0) { + size_t transfer_size = size <= MAX_TRANSFER_SIZE ? + size : MAX_TRANSFER_SIZE; + + dev_dbg_f(&udev->dev, "transfer size %zu\n", transfer_size); + + memcpy(p, data, transfer_size); + r = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + USB_REQ_FIRMWARE_DOWNLOAD, + USB_DIR_OUT | USB_TYPE_VENDOR, + code_offset, 0, p, transfer_size, 1000 /* ms */); + if (r < 0) { + dev_err(&udev->dev, + "USB control request for firmware upload" + " failed. Error number %d\n", r); + goto error; + } + transfer_size = r & ~1; + + size -= transfer_size; + data += transfer_size; + code_offset += transfer_size/sizeof(u16); + } + + if (flags & REBOOT) { + u8 ret; + + /* Use "DMA-aware" buffer. */ + r = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + USB_REQ_FIRMWARE_CONFIRM, + USB_DIR_IN | USB_TYPE_VENDOR, + 0, 0, p, sizeof(ret), 5000 /* ms */); + if (r != sizeof(ret)) { + dev_err(&udev->dev, + "control request firmware confirmation failed." + " Return value %d\n", r); + if (r >= 0) + r = -ENODEV; + goto error; + } + ret = p[0]; + if (ret & 0x80) { + dev_err(&udev->dev, + "Internal error while downloading." + " Firmware confirm return value %#04x\n", + (unsigned int)ret); + r = -ENODEV; + goto error; + } + dev_dbg_f(&udev->dev, "firmware confirm return value %#04x\n", + (unsigned int)ret); + } + + r = 0; +error: + kfree(p); + return r; +} + +static u16 get_word(const void *data, u16 offset) +{ + const __le16 *p = data; + return le16_to_cpu(p[offset]); +} + +static char *get_fw_name(struct zd_usb *usb, char *buffer, size_t size, + const char* postfix) +{ + scnprintf(buffer, size, "%s%s", + usb->is_zd1211b ? + FW_ZD1211B_PREFIX : FW_ZD1211_PREFIX, + postfix); + return buffer; +} + +static int handle_version_mismatch(struct zd_usb *usb, + const struct firmware *ub_fw) +{ + struct usb_device *udev = zd_usb_to_usbdev(usb); + const struct firmware *ur_fw = NULL; + int offset; + int r = 0; + char fw_name[128]; + + r = request_fw_file(&ur_fw, + get_fw_name(usb, fw_name, sizeof(fw_name), "ur"), + &udev->dev); + if (r) + goto error; + + r = upload_code(udev, ur_fw->data, ur_fw->size, FW_START, REBOOT); + if (r) + goto error; + + offset = (E2P_BOOT_CODE_OFFSET * sizeof(u16)); + r = upload_code(udev, ub_fw->data + offset, ub_fw->size - offset, + E2P_START + E2P_BOOT_CODE_OFFSET, REBOOT); + + /* At this point, the vendor driver downloads the whole firmware + * image, hacks around with version IDs, and uploads it again, + * completely overwriting the boot code. We do not do this here as + * it is not required on any tested devices, and it is suspected to + * cause problems. */ +error: + release_firmware(ur_fw); + return r; +} + +static int upload_firmware(struct zd_usb *usb) +{ + int r; + u16 fw_bcdDevice; + u16 bcdDevice; + struct usb_device *udev = zd_usb_to_usbdev(usb); + const struct firmware *ub_fw = NULL; + const struct firmware *uph_fw = NULL; + char fw_name[128]; + + bcdDevice = get_bcdDevice(udev); + + r = request_fw_file(&ub_fw, + get_fw_name(usb, fw_name, sizeof(fw_name), "ub"), + &udev->dev); + if (r) + goto error; + + fw_bcdDevice = get_word(ub_fw->data, E2P_DATA_OFFSET); + + if (fw_bcdDevice != bcdDevice) { + dev_info(&udev->dev, + "firmware version %#06x and device bootcode version " + "%#06x differ\n", fw_bcdDevice, bcdDevice); + if (bcdDevice <= 0x4313) + dev_warn(&udev->dev, "device has old bootcode, please " + "report success or failure\n"); + + r = handle_version_mismatch(usb, ub_fw); + if (r) + goto error; + } else { + dev_dbg_f(&udev->dev, + "firmware device id %#06x is equal to the " + "actual device id\n", fw_bcdDevice); + } + + + r = request_fw_file(&uph_fw, + get_fw_name(usb, fw_name, sizeof(fw_name), "uphr"), + &udev->dev); + if (r) + goto error; + + r = upload_code(udev, uph_fw->data, uph_fw->size, FW_START, REBOOT); + if (r) { + dev_err(&udev->dev, + "Could not upload firmware code uph. Error number %d\n", + r); + } + + /* FALL-THROUGH */ +error: + release_firmware(ub_fw); + release_firmware(uph_fw); + return r; +} + +MODULE_FIRMWARE(FW_ZD1211B_PREFIX "ur"); +MODULE_FIRMWARE(FW_ZD1211_PREFIX "ur"); +MODULE_FIRMWARE(FW_ZD1211B_PREFIX "ub"); +MODULE_FIRMWARE(FW_ZD1211_PREFIX "ub"); +MODULE_FIRMWARE(FW_ZD1211B_PREFIX "uphr"); +MODULE_FIRMWARE(FW_ZD1211_PREFIX "uphr"); + +/* Read data from device address space using "firmware interface" which does + * not require firmware to be loaded. */ +int zd_usb_read_fw(struct zd_usb *usb, zd_addr_t addr, u8 *data, u16 len) +{ + int r; + struct usb_device *udev = zd_usb_to_usbdev(usb); + u8 *buf; + + /* Use "DMA-aware" buffer. */ + buf = kmalloc(len, GFP_KERNEL); + if (!buf) + return -ENOMEM; + r = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + USB_REQ_FIRMWARE_READ_DATA, USB_DIR_IN | 0x40, addr, 0, + buf, len, 5000); + if (r < 0) { + dev_err(&udev->dev, + "read over firmware interface failed: %d\n", r); + goto exit; + } else if (r != len) { + dev_err(&udev->dev, + "incomplete read over firmware interface: %d/%d\n", + r, len); + r = -EIO; + goto exit; + } + r = 0; + memcpy(data, buf, len); +exit: + kfree(buf); + return r; +} + +#define urb_dev(urb) (&(urb)->dev->dev) + +static inline void handle_regs_int_override(struct urb *urb) +{ + struct zd_usb *usb = urb->context; + struct zd_usb_interrupt *intr = &usb->intr; + unsigned long flags; + + spin_lock_irqsave(&intr->lock, flags); + if (atomic_read(&intr->read_regs_enabled)) { + atomic_set(&intr->read_regs_enabled, 0); + intr->read_regs_int_overridden = 1; + complete(&intr->read_regs.completion); + } + spin_unlock_irqrestore(&intr->lock, flags); +} + +static inline void handle_regs_int(struct urb *urb) +{ + struct zd_usb *usb = urb->context; + struct zd_usb_interrupt *intr = &usb->intr; + unsigned long flags; + int len; + u16 int_num; + + spin_lock_irqsave(&intr->lock, flags); + + int_num = le16_to_cpu(*(__le16 *)(urb->transfer_buffer+2)); + if (int_num == CR_INTERRUPT) { + struct zd_mac *mac = zd_hw_mac(zd_usb_to_hw(urb->context)); + spin_lock(&mac->lock); + memcpy(&mac->intr_buffer, urb->transfer_buffer, + USB_MAX_EP_INT_BUFFER); + spin_unlock(&mac->lock); + schedule_work(&mac->process_intr); + } else if (atomic_read(&intr->read_regs_enabled)) { + len = urb->actual_length; + intr->read_regs.length = urb->actual_length; + if (len > sizeof(intr->read_regs.buffer)) + len = sizeof(intr->read_regs.buffer); + + memcpy(intr->read_regs.buffer, urb->transfer_buffer, len); + + /* Sometimes USB_INT_ID_REGS is not overridden, but comes after + * USB_INT_ID_RETRY_FAILED. Read-reg retry then gets this + * delayed USB_INT_ID_REGS, but leaves USB_INT_ID_REGS of + * retry unhandled. Next read-reg command then might catch + * this wrong USB_INT_ID_REGS. Fix by ignoring wrong reads. + */ + if (!check_read_regs(usb, intr->read_regs.req, + intr->read_regs.req_count)) + goto out; + + atomic_set(&intr->read_regs_enabled, 0); + intr->read_regs_int_overridden = 0; + complete(&intr->read_regs.completion); + + goto out; + } + +out: + spin_unlock_irqrestore(&intr->lock, flags); + + /* CR_INTERRUPT might override read_reg too. */ + if (int_num == CR_INTERRUPT && atomic_read(&intr->read_regs_enabled)) + handle_regs_int_override(urb); +} + +static void int_urb_complete(struct urb *urb) +{ + int r; + struct usb_int_header *hdr; + struct zd_usb *usb; + struct zd_usb_interrupt *intr; + + switch (urb->status) { + case 0: + break; + case -ESHUTDOWN: + case -EINVAL: + case -ENODEV: + case -ENOENT: + case -ECONNRESET: + case -EPIPE: + dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status); + return; + default: + dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status); + goto resubmit; + } + + if (urb->actual_length < sizeof(hdr)) { + dev_dbg_f(urb_dev(urb), "error: urb %p to small\n", urb); + goto resubmit; + } + + hdr = urb->transfer_buffer; + if (hdr->type != USB_INT_TYPE) { + dev_dbg_f(urb_dev(urb), "error: urb %p wrong type\n", urb); + goto resubmit; + } + + /* USB_INT_ID_RETRY_FAILED triggered by tx-urb submit can override + * pending USB_INT_ID_REGS causing read command timeout. + */ + usb = urb->context; + intr = &usb->intr; + if (hdr->id != USB_INT_ID_REGS && atomic_read(&intr->read_regs_enabled)) + handle_regs_int_override(urb); + + switch (hdr->id) { + case USB_INT_ID_REGS: + handle_regs_int(urb); + break; + case USB_INT_ID_RETRY_FAILED: + zd_mac_tx_failed(urb); + break; + default: + dev_dbg_f(urb_dev(urb), "error: urb %p unknown id %x\n", urb, + (unsigned int)hdr->id); + goto resubmit; + } + +resubmit: + r = usb_submit_urb(urb, GFP_ATOMIC); + if (r) { + dev_dbg_f(urb_dev(urb), "error: resubmit urb %p err code %d\n", + urb, r); + /* TODO: add worker to reset intr->urb */ + } + return; +} + +static inline int int_urb_interval(struct usb_device *udev) +{ + switch (udev->speed) { + case USB_SPEED_HIGH: + return 4; + case USB_SPEED_LOW: + return 10; + case USB_SPEED_FULL: + default: + return 1; + } +} + +static inline int usb_int_enabled(struct zd_usb *usb) +{ + unsigned long flags; + struct zd_usb_interrupt *intr = &usb->intr; + struct urb *urb; + + spin_lock_irqsave(&intr->lock, flags); + urb = intr->urb; + spin_unlock_irqrestore(&intr->lock, flags); + return urb != NULL; +} + +int zd_usb_enable_int(struct zd_usb *usb) +{ + int r; + struct usb_device *udev = zd_usb_to_usbdev(usb); + struct zd_usb_interrupt *intr = &usb->intr; + struct urb *urb; + + dev_dbg_f(zd_usb_dev(usb), "\n"); + + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) { + r = -ENOMEM; + goto out; + } + + ZD_ASSERT(!irqs_disabled()); + spin_lock_irq(&intr->lock); + if (intr->urb) { + spin_unlock_irq(&intr->lock); + r = 0; + goto error_free_urb; + } + intr->urb = urb; + spin_unlock_irq(&intr->lock); + + r = -ENOMEM; + intr->buffer = usb_alloc_coherent(udev, USB_MAX_EP_INT_BUFFER, + GFP_KERNEL, &intr->buffer_dma); + if (!intr->buffer) { + dev_dbg_f(zd_usb_dev(usb), + "couldn't allocate transfer_buffer\n"); + goto error_set_urb_null; + } + + usb_fill_int_urb(urb, udev, usb_rcvintpipe(udev, EP_INT_IN), + intr->buffer, USB_MAX_EP_INT_BUFFER, + int_urb_complete, usb, + intr->interval); + urb->transfer_dma = intr->buffer_dma; + urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + dev_dbg_f(zd_usb_dev(usb), "submit urb %p\n", intr->urb); + r = usb_submit_urb(urb, GFP_KERNEL); + if (r) { + dev_dbg_f(zd_usb_dev(usb), + "Couldn't submit urb. Error number %d\n", r); + goto error; + } + + return 0; +error: + usb_free_coherent(udev, USB_MAX_EP_INT_BUFFER, + intr->buffer, intr->buffer_dma); +error_set_urb_null: + spin_lock_irq(&intr->lock); + intr->urb = NULL; + spin_unlock_irq(&intr->lock); +error_free_urb: + usb_free_urb(urb); +out: + return r; +} + +void zd_usb_disable_int(struct zd_usb *usb) +{ + unsigned long flags; + struct usb_device *udev = zd_usb_to_usbdev(usb); + struct zd_usb_interrupt *intr = &usb->intr; + struct urb *urb; + void *buffer; + dma_addr_t buffer_dma; + + spin_lock_irqsave(&intr->lock, flags); + urb = intr->urb; + if (!urb) { + spin_unlock_irqrestore(&intr->lock, flags); + return; + } + intr->urb = NULL; + buffer = intr->buffer; + buffer_dma = intr->buffer_dma; + intr->buffer = NULL; + spin_unlock_irqrestore(&intr->lock, flags); + + usb_kill_urb(urb); + dev_dbg_f(zd_usb_dev(usb), "urb %p killed\n", urb); + usb_free_urb(urb); + + usb_free_coherent(udev, USB_MAX_EP_INT_BUFFER, buffer, buffer_dma); +} + +static void handle_rx_packet(struct zd_usb *usb, const u8 *buffer, + unsigned int length) +{ + int i; + const struct rx_length_info *length_info; + + if (length < sizeof(struct rx_length_info)) { + /* It's not a complete packet anyhow. */ + dev_dbg_f(zd_usb_dev(usb), "invalid, small RX packet : %d\n", + length); + return; + } + length_info = (struct rx_length_info *) + (buffer + length - sizeof(struct rx_length_info)); + + /* It might be that three frames are merged into a single URB + * transaction. We have to check for the length info tag. + * + * While testing we discovered that length_info might be unaligned, + * because if USB transactions are merged, the last packet will not + * be padded. Unaligned access might also happen if the length_info + * structure is not present. + */ + if (get_unaligned_le16(&length_info->tag) == RX_LENGTH_INFO_TAG) + { + unsigned int l, k, n; + for (i = 0, l = 0;; i++) { + k = get_unaligned_le16(&length_info->length[i]); + if (k == 0) + return; + n = l+k; + if (n > length) + return; + zd_mac_rx(zd_usb_to_hw(usb), buffer+l, k); + if (i >= 2) + return; + l = (n+3) & ~3; + } + } else { + zd_mac_rx(zd_usb_to_hw(usb), buffer, length); + } +} + +static void rx_urb_complete(struct urb *urb) +{ + int r; + struct zd_usb *usb; + struct zd_usb_rx *rx; + const u8 *buffer; + unsigned int length; + unsigned long flags; + + switch (urb->status) { + case 0: + break; + case -ESHUTDOWN: + case -EINVAL: + case -ENODEV: + case -ENOENT: + case -ECONNRESET: + case -EPIPE: + dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status); + return; + default: + dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status); + goto resubmit; + } + + buffer = urb->transfer_buffer; + length = urb->actual_length; + usb = urb->context; + rx = &usb->rx; + + tasklet_schedule(&rx->reset_timer_tasklet); + + if (length%rx->usb_packet_size > rx->usb_packet_size-4) { + /* If there is an old first fragment, we don't care. */ + dev_dbg_f(urb_dev(urb), "*** first fragment ***\n"); + ZD_ASSERT(length <= ARRAY_SIZE(rx->fragment)); + spin_lock_irqsave(&rx->lock, flags); + memcpy(rx->fragment, buffer, length); + rx->fragment_length = length; + spin_unlock_irqrestore(&rx->lock, flags); + goto resubmit; + } + + spin_lock_irqsave(&rx->lock, flags); + if (rx->fragment_length > 0) { + /* We are on a second fragment, we believe */ + ZD_ASSERT(length + rx->fragment_length <= + ARRAY_SIZE(rx->fragment)); + dev_dbg_f(urb_dev(urb), "*** second fragment ***\n"); + memcpy(rx->fragment+rx->fragment_length, buffer, length); + handle_rx_packet(usb, rx->fragment, + rx->fragment_length + length); + rx->fragment_length = 0; + spin_unlock_irqrestore(&rx->lock, flags); + } else { + spin_unlock_irqrestore(&rx->lock, flags); + handle_rx_packet(usb, buffer, length); + } + +resubmit: + r = usb_submit_urb(urb, GFP_ATOMIC); + if (r) + dev_dbg_f(urb_dev(urb), "urb %p resubmit error %d\n", urb, r); +} + +static struct urb *alloc_rx_urb(struct zd_usb *usb) +{ + struct usb_device *udev = zd_usb_to_usbdev(usb); + struct urb *urb; + void *buffer; + + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) + return NULL; + buffer = usb_alloc_coherent(udev, USB_MAX_RX_SIZE, GFP_KERNEL, + &urb->transfer_dma); + if (!buffer) { + usb_free_urb(urb); + return NULL; + } + + usb_fill_bulk_urb(urb, udev, usb_rcvbulkpipe(udev, EP_DATA_IN), + buffer, USB_MAX_RX_SIZE, + rx_urb_complete, usb); + urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + return urb; +} + +static void free_rx_urb(struct urb *urb) +{ + if (!urb) + return; + usb_free_coherent(urb->dev, urb->transfer_buffer_length, + urb->transfer_buffer, urb->transfer_dma); + usb_free_urb(urb); +} + +static int __zd_usb_enable_rx(struct zd_usb *usb) +{ + int i, r; + struct zd_usb_rx *rx = &usb->rx; + struct urb **urbs; + + dev_dbg_f(zd_usb_dev(usb), "\n"); + + r = -ENOMEM; + urbs = kcalloc(RX_URBS_COUNT, sizeof(struct urb *), GFP_KERNEL); + if (!urbs) + goto error; + for (i = 0; i < RX_URBS_COUNT; i++) { + urbs[i] = alloc_rx_urb(usb); + if (!urbs[i]) + goto error; + } + + ZD_ASSERT(!irqs_disabled()); + spin_lock_irq(&rx->lock); + if (rx->urbs) { + spin_unlock_irq(&rx->lock); + r = 0; + goto error; + } + rx->urbs = urbs; + rx->urbs_count = RX_URBS_COUNT; + spin_unlock_irq(&rx->lock); + + for (i = 0; i < RX_URBS_COUNT; i++) { + r = usb_submit_urb(urbs[i], GFP_KERNEL); + if (r) + goto error_submit; + } + + return 0; +error_submit: + for (i = 0; i < RX_URBS_COUNT; i++) { + usb_kill_urb(urbs[i]); + } + spin_lock_irq(&rx->lock); + rx->urbs = NULL; + rx->urbs_count = 0; + spin_unlock_irq(&rx->lock); +error: + if (urbs) { + for (i = 0; i < RX_URBS_COUNT; i++) + free_rx_urb(urbs[i]); + } + return r; +} + +int zd_usb_enable_rx(struct zd_usb *usb) +{ + int r; + struct zd_usb_rx *rx = &usb->rx; + + mutex_lock(&rx->setup_mutex); + r = __zd_usb_enable_rx(usb); + mutex_unlock(&rx->setup_mutex); + + zd_usb_reset_rx_idle_timer(usb); + + return r; +} + +static void __zd_usb_disable_rx(struct zd_usb *usb) +{ + int i; + unsigned long flags; + struct urb **urbs; + unsigned int count; + struct zd_usb_rx *rx = &usb->rx; + + spin_lock_irqsave(&rx->lock, flags); + urbs = rx->urbs; + count = rx->urbs_count; + spin_unlock_irqrestore(&rx->lock, flags); + if (!urbs) + return; + + for (i = 0; i < count; i++) { + usb_kill_urb(urbs[i]); + free_rx_urb(urbs[i]); + } + kfree(urbs); + + spin_lock_irqsave(&rx->lock, flags); + rx->urbs = NULL; + rx->urbs_count = 0; + spin_unlock_irqrestore(&rx->lock, flags); +} + +void zd_usb_disable_rx(struct zd_usb *usb) +{ + struct zd_usb_rx *rx = &usb->rx; + + mutex_lock(&rx->setup_mutex); + __zd_usb_disable_rx(usb); + mutex_unlock(&rx->setup_mutex); + + tasklet_kill(&rx->reset_timer_tasklet); + cancel_delayed_work_sync(&rx->idle_work); +} + +static void zd_usb_reset_rx(struct zd_usb *usb) +{ + bool do_reset; + struct zd_usb_rx *rx = &usb->rx; + unsigned long flags; + + mutex_lock(&rx->setup_mutex); + + spin_lock_irqsave(&rx->lock, flags); + do_reset = rx->urbs != NULL; + spin_unlock_irqrestore(&rx->lock, flags); + + if (do_reset) { + __zd_usb_disable_rx(usb); + __zd_usb_enable_rx(usb); + } + + mutex_unlock(&rx->setup_mutex); + + if (do_reset) + zd_usb_reset_rx_idle_timer(usb); +} + +/** + * zd_usb_disable_tx - disable transmission + * @usb: the zd1211rw-private USB structure + * + * Frees all URBs in the free list and marks the transmission as disabled. + */ +void zd_usb_disable_tx(struct zd_usb *usb) +{ + struct zd_usb_tx *tx = &usb->tx; + unsigned long flags; + + atomic_set(&tx->enabled, 0); + + /* kill all submitted tx-urbs */ + usb_kill_anchored_urbs(&tx->submitted); + + spin_lock_irqsave(&tx->lock, flags); + WARN_ON(!skb_queue_empty(&tx->submitted_skbs)); + WARN_ON(tx->submitted_urbs != 0); + tx->submitted_urbs = 0; + spin_unlock_irqrestore(&tx->lock, flags); + + /* The stopped state is ignored, relying on ieee80211_wake_queues() + * in a potentionally following zd_usb_enable_tx(). + */ +} + +/** + * zd_usb_enable_tx - enables transmission + * @usb: a &struct zd_usb pointer + * + * This function enables transmission and prepares the &zd_usb_tx data + * structure. + */ +void zd_usb_enable_tx(struct zd_usb *usb) +{ + unsigned long flags; + struct zd_usb_tx *tx = &usb->tx; + + spin_lock_irqsave(&tx->lock, flags); + atomic_set(&tx->enabled, 1); + tx->submitted_urbs = 0; + ieee80211_wake_queues(zd_usb_to_hw(usb)); + tx->stopped = 0; + spin_unlock_irqrestore(&tx->lock, flags); +} + +static void tx_dec_submitted_urbs(struct zd_usb *usb) +{ + struct zd_usb_tx *tx = &usb->tx; + unsigned long flags; + + spin_lock_irqsave(&tx->lock, flags); + --tx->submitted_urbs; + if (tx->stopped && tx->submitted_urbs <= ZD_USB_TX_LOW) { + ieee80211_wake_queues(zd_usb_to_hw(usb)); + tx->stopped = 0; + } + spin_unlock_irqrestore(&tx->lock, flags); +} + +static void tx_inc_submitted_urbs(struct zd_usb *usb) +{ + struct zd_usb_tx *tx = &usb->tx; + unsigned long flags; + + spin_lock_irqsave(&tx->lock, flags); + ++tx->submitted_urbs; + if (!tx->stopped && tx->submitted_urbs > ZD_USB_TX_HIGH) { + ieee80211_stop_queues(zd_usb_to_hw(usb)); + tx->stopped = 1; + } + spin_unlock_irqrestore(&tx->lock, flags); +} + +/** + * tx_urb_complete - completes the execution of an URB + * @urb: a URB + * + * This function is called if the URB has been transferred to a device or an + * error has happened. + */ +static void tx_urb_complete(struct urb *urb) +{ + int r; + struct sk_buff *skb; + struct ieee80211_tx_info *info; + struct zd_usb *usb; + struct zd_usb_tx *tx; + + skb = (struct sk_buff *)urb->context; + info = IEEE80211_SKB_CB(skb); + /* + * grab 'usb' pointer before handing off the skb (since + * it might be freed by zd_mac_tx_to_dev or mac80211) + */ + usb = &zd_hw_mac(info->rate_driver_data[0])->chip.usb; + tx = &usb->tx; + + switch (urb->status) { + case 0: + break; + case -ESHUTDOWN: + case -EINVAL: + case -ENODEV: + case -ENOENT: + case -ECONNRESET: + case -EPIPE: + dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status); + break; + default: + dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status); + goto resubmit; + } +free_urb: + skb_unlink(skb, &usb->tx.submitted_skbs); + zd_mac_tx_to_dev(skb, urb->status); + usb_free_urb(urb); + tx_dec_submitted_urbs(usb); + return; +resubmit: + usb_anchor_urb(urb, &tx->submitted); + r = usb_submit_urb(urb, GFP_ATOMIC); + if (r) { + usb_unanchor_urb(urb); + dev_dbg_f(urb_dev(urb), "error resubmit urb %p %d\n", urb, r); + goto free_urb; + } +} + +/** + * zd_usb_tx: initiates transfer of a frame of the device + * + * @usb: the zd1211rw-private USB structure + * @skb: a &struct sk_buff pointer + * + * This function tranmits a frame to the device. It doesn't wait for + * completion. The frame must contain the control set and have all the + * control set information available. + * + * The function returns 0 if the transfer has been successfully initiated. + */ +int zd_usb_tx(struct zd_usb *usb, struct sk_buff *skb) +{ + int r; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct usb_device *udev = zd_usb_to_usbdev(usb); + struct urb *urb; + struct zd_usb_tx *tx = &usb->tx; + + if (!atomic_read(&tx->enabled)) { + r = -ENOENT; + goto out; + } + + urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!urb) { + r = -ENOMEM; + goto out; + } + + usb_fill_bulk_urb(urb, udev, usb_sndbulkpipe(udev, EP_DATA_OUT), + skb->data, skb->len, tx_urb_complete, skb); + + info->rate_driver_data[1] = (void *)jiffies; + skb_queue_tail(&tx->submitted_skbs, skb); + usb_anchor_urb(urb, &tx->submitted); + + r = usb_submit_urb(urb, GFP_ATOMIC); + if (r) { + dev_dbg_f(zd_usb_dev(usb), "error submit urb %p %d\n", urb, r); + usb_unanchor_urb(urb); + skb_unlink(skb, &tx->submitted_skbs); + goto error; + } + tx_inc_submitted_urbs(usb); + return 0; +error: + usb_free_urb(urb); +out: + return r; +} + +static bool zd_tx_timeout(struct zd_usb *usb) +{ + struct zd_usb_tx *tx = &usb->tx; + struct sk_buff_head *q = &tx->submitted_skbs; + struct sk_buff *skb, *skbnext; + struct ieee80211_tx_info *info; + unsigned long flags, trans_start; + bool have_timedout = false; + + spin_lock_irqsave(&q->lock, flags); + skb_queue_walk_safe(q, skb, skbnext) { + info = IEEE80211_SKB_CB(skb); + trans_start = (unsigned long)info->rate_driver_data[1]; + + if (time_is_before_jiffies(trans_start + ZD_TX_TIMEOUT)) { + have_timedout = true; + break; + } + } + spin_unlock_irqrestore(&q->lock, flags); + + return have_timedout; +} + +static void zd_tx_watchdog_handler(struct work_struct *work) +{ + struct zd_usb *usb = + container_of(work, struct zd_usb, tx.watchdog_work.work); + struct zd_usb_tx *tx = &usb->tx; + + if (!atomic_read(&tx->enabled) || !tx->watchdog_enabled) + goto out; + if (!zd_tx_timeout(usb)) + goto out; + + /* TX halted, try reset */ + dev_warn(zd_usb_dev(usb), "TX-stall detected, resetting device..."); + + usb_queue_reset_device(usb->intf); + + /* reset will stop this worker, don't rearm */ + return; +out: + queue_delayed_work(zd_workqueue, &tx->watchdog_work, + ZD_TX_WATCHDOG_INTERVAL); +} + +void zd_tx_watchdog_enable(struct zd_usb *usb) +{ + struct zd_usb_tx *tx = &usb->tx; + + if (!tx->watchdog_enabled) { + dev_dbg_f(zd_usb_dev(usb), "\n"); + queue_delayed_work(zd_workqueue, &tx->watchdog_work, + ZD_TX_WATCHDOG_INTERVAL); + tx->watchdog_enabled = 1; + } +} + +void zd_tx_watchdog_disable(struct zd_usb *usb) +{ + struct zd_usb_tx *tx = &usb->tx; + + if (tx->watchdog_enabled) { + dev_dbg_f(zd_usb_dev(usb), "\n"); + tx->watchdog_enabled = 0; + cancel_delayed_work_sync(&tx->watchdog_work); + } +} + +static void zd_rx_idle_timer_handler(struct work_struct *work) +{ + struct zd_usb *usb = + container_of(work, struct zd_usb, rx.idle_work.work); + struct zd_mac *mac = zd_usb_to_mac(usb); + + if (!test_bit(ZD_DEVICE_RUNNING, &mac->flags)) + return; + + dev_dbg_f(zd_usb_dev(usb), "\n"); + + /* 30 seconds since last rx, reset rx */ + zd_usb_reset_rx(usb); +} + +static void zd_usb_reset_rx_idle_timer_tasklet(struct tasklet_struct *t) +{ + struct zd_usb *usb = from_tasklet(usb, t, rx.reset_timer_tasklet); + + zd_usb_reset_rx_idle_timer(usb); +} + +void zd_usb_reset_rx_idle_timer(struct zd_usb *usb) +{ + struct zd_usb_rx *rx = &usb->rx; + + mod_delayed_work(zd_workqueue, &rx->idle_work, ZD_RX_IDLE_INTERVAL); +} + +static inline void init_usb_interrupt(struct zd_usb *usb) +{ + struct zd_usb_interrupt *intr = &usb->intr; + + spin_lock_init(&intr->lock); + intr->interval = int_urb_interval(zd_usb_to_usbdev(usb)); + init_completion(&intr->read_regs.completion); + atomic_set(&intr->read_regs_enabled, 0); + intr->read_regs.cr_int_addr = cpu_to_le16((u16)CR_INTERRUPT); +} + +static inline void init_usb_rx(struct zd_usb *usb) +{ + struct zd_usb_rx *rx = &usb->rx; + + spin_lock_init(&rx->lock); + mutex_init(&rx->setup_mutex); + if (interface_to_usbdev(usb->intf)->speed == USB_SPEED_HIGH) { + rx->usb_packet_size = 512; + } else { + rx->usb_packet_size = 64; + } + ZD_ASSERT(rx->fragment_length == 0); + INIT_DELAYED_WORK(&rx->idle_work, zd_rx_idle_timer_handler); + rx->reset_timer_tasklet.func = (void (*)) + zd_usb_reset_rx_idle_timer_tasklet; + rx->reset_timer_tasklet.data = (unsigned long)&rx->reset_timer_tasklet; +} + +static inline void init_usb_tx(struct zd_usb *usb) +{ + struct zd_usb_tx *tx = &usb->tx; + + spin_lock_init(&tx->lock); + atomic_set(&tx->enabled, 0); + tx->stopped = 0; + skb_queue_head_init(&tx->submitted_skbs); + init_usb_anchor(&tx->submitted); + tx->submitted_urbs = 0; + tx->watchdog_enabled = 0; + INIT_DELAYED_WORK(&tx->watchdog_work, zd_tx_watchdog_handler); +} + +void zd_usb_init(struct zd_usb *usb, struct ieee80211_hw *hw, + struct usb_interface *intf) +{ + memset(usb, 0, sizeof(*usb)); + usb->intf = usb_get_intf(intf); + usb_set_intfdata(usb->intf, hw); + init_usb_anchor(&usb->submitted_cmds); + init_usb_interrupt(usb); + init_usb_tx(usb); + init_usb_rx(usb); +} + +void zd_usb_clear(struct zd_usb *usb) +{ + usb_set_intfdata(usb->intf, NULL); + usb_put_intf(usb->intf); + ZD_MEMCLEAR(usb, sizeof(*usb)); + /* FIXME: usb_interrupt, usb_tx, usb_rx? */ +} + +static const char *speed(enum usb_device_speed speed) +{ + switch (speed) { + case USB_SPEED_LOW: + return "low"; + case USB_SPEED_FULL: + return "full"; + case USB_SPEED_HIGH: + return "high"; + default: + return "unknown speed"; + } +} + +static int scnprint_id(struct usb_device *udev, char *buffer, size_t size) +{ + return scnprintf(buffer, size, "%04hx:%04hx v%04hx %s", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct), + get_bcdDevice(udev), + speed(udev->speed)); +} + +int zd_usb_scnprint_id(struct zd_usb *usb, char *buffer, size_t size) +{ + struct usb_device *udev = interface_to_usbdev(usb->intf); + return scnprint_id(udev, buffer, size); +} + +#ifdef DEBUG +static void print_id(struct usb_device *udev) +{ + char buffer[40]; + + scnprint_id(udev, buffer, sizeof(buffer)); + buffer[sizeof(buffer)-1] = 0; + dev_dbg_f(&udev->dev, "%s\n", buffer); +} +#else +#define print_id(udev) do { } while (0) +#endif + +static int eject_installer(struct usb_interface *intf) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct usb_host_interface *iface_desc = intf->cur_altsetting; + struct usb_endpoint_descriptor *endpoint; + unsigned char *cmd; + u8 bulk_out_ep; + int r; + + if (iface_desc->desc.bNumEndpoints < 2) + return -ENODEV; + + /* Find bulk out endpoint */ + for (r = 1; r >= 0; r--) { + endpoint = &iface_desc->endpoint[r].desc; + if (usb_endpoint_dir_out(endpoint) && + usb_endpoint_xfer_bulk(endpoint)) { + bulk_out_ep = endpoint->bEndpointAddress; + break; + } + } + if (r == -1) { + dev_err(&udev->dev, + "zd1211rw: Could not find bulk out endpoint\n"); + return -ENODEV; + } + + cmd = kzalloc(31, GFP_KERNEL); + if (cmd == NULL) + return -ENODEV; + + /* USB bulk command block */ + cmd[0] = 0x55; /* bulk command signature */ + cmd[1] = 0x53; /* bulk command signature */ + cmd[2] = 0x42; /* bulk command signature */ + cmd[3] = 0x43; /* bulk command signature */ + cmd[14] = 6; /* command length */ + + cmd[15] = 0x1b; /* SCSI command: START STOP UNIT */ + cmd[19] = 0x2; /* eject disc */ + + dev_info(&udev->dev, "Ejecting virtual installer media...\n"); + r = usb_bulk_msg(udev, usb_sndbulkpipe(udev, bulk_out_ep), + cmd, 31, NULL, 2000); + kfree(cmd); + if (r) + return r; + + /* At this point, the device disconnects and reconnects with the real + * ID numbers. */ + + usb_set_intfdata(intf, NULL); + return 0; +} + +int zd_usb_init_hw(struct zd_usb *usb) +{ + int r; + struct zd_mac *mac = zd_usb_to_mac(usb); + + dev_dbg_f(zd_usb_dev(usb), "\n"); + + r = upload_firmware(usb); + if (r) { + dev_err(zd_usb_dev(usb), + "couldn't load firmware. Error number %d\n", r); + return r; + } + + r = usb_reset_configuration(zd_usb_to_usbdev(usb)); + if (r) { + dev_dbg_f(zd_usb_dev(usb), + "couldn't reset configuration. Error number %d\n", r); + return r; + } + + r = zd_mac_init_hw(mac->hw); + if (r) { + dev_dbg_f(zd_usb_dev(usb), + "couldn't initialize mac. Error number %d\n", r); + return r; + } + + usb->initialized = 1; + return 0; +} + +static int probe(struct usb_interface *intf, const struct usb_device_id *id) +{ + int r; + struct usb_device *udev = interface_to_usbdev(intf); + struct zd_usb *usb; + struct ieee80211_hw *hw = NULL; + + print_id(udev); + + if (id->driver_info & DEVICE_INSTALLER) + return eject_installer(intf); + + switch (udev->speed) { + case USB_SPEED_LOW: + case USB_SPEED_FULL: + case USB_SPEED_HIGH: + break; + default: + dev_dbg_f(&intf->dev, "Unknown USB speed\n"); + r = -ENODEV; + goto error; + } + + r = usb_reset_device(udev); + if (r) { + dev_err(&intf->dev, + "couldn't reset usb device. Error number %d\n", r); + goto error; + } + + hw = zd_mac_alloc_hw(intf); + if (hw == NULL) { + r = -ENOMEM; + goto error; + } + + usb = &zd_hw_mac(hw)->chip.usb; + usb->is_zd1211b = (id->driver_info == DEVICE_ZD1211B) != 0; + + r = zd_mac_preinit_hw(hw); + if (r) { + dev_dbg_f(&intf->dev, + "couldn't initialize mac. Error number %d\n", r); + goto error; + } + + r = ieee80211_register_hw(hw); + if (r) { + dev_dbg_f(&intf->dev, + "couldn't register device. Error number %d\n", r); + goto error; + } + + dev_dbg_f(&intf->dev, "successful\n"); + dev_info(&intf->dev, "%s\n", wiphy_name(hw->wiphy)); + return 0; +error: + usb_reset_device(interface_to_usbdev(intf)); + if (hw) { + zd_mac_clear(zd_hw_mac(hw)); + ieee80211_free_hw(hw); + } + return r; +} + +static void disconnect(struct usb_interface *intf) +{ + struct ieee80211_hw *hw = zd_intf_to_hw(intf); + struct zd_mac *mac; + struct zd_usb *usb; + + /* Either something really bad happened, or we're just dealing with + * a DEVICE_INSTALLER. */ + if (hw == NULL) + return; + + mac = zd_hw_mac(hw); + usb = &mac->chip.usb; + + dev_dbg_f(zd_usb_dev(usb), "\n"); + + ieee80211_unregister_hw(hw); + + /* Just in case something has gone wrong! */ + zd_usb_disable_tx(usb); + zd_usb_disable_rx(usb); + zd_usb_disable_int(usb); + + /* If the disconnect has been caused by a removal of the + * driver module, the reset allows reloading of the driver. If the + * reset will not be executed here, the upload of the firmware in the + * probe function caused by the reloading of the driver will fail. + */ + usb_reset_device(interface_to_usbdev(intf)); + + zd_mac_clear(mac); + ieee80211_free_hw(hw); + dev_dbg(&intf->dev, "disconnected\n"); +} + +static void zd_usb_resume(struct zd_usb *usb) +{ + struct zd_mac *mac = zd_usb_to_mac(usb); + int r; + + dev_dbg_f(zd_usb_dev(usb), "\n"); + + r = zd_op_start(zd_usb_to_hw(usb)); + if (r < 0) { + dev_warn(zd_usb_dev(usb), "Device resume failed " + "with error code %d. Retrying...\n", r); + if (usb->was_running) + set_bit(ZD_DEVICE_RUNNING, &mac->flags); + usb_queue_reset_device(usb->intf); + return; + } + + if (mac->type != NL80211_IFTYPE_UNSPECIFIED) { + r = zd_restore_settings(mac); + if (r < 0) { + dev_dbg(zd_usb_dev(usb), + "failed to restore settings, %d\n", r); + return; + } + } +} + +static void zd_usb_stop(struct zd_usb *usb) +{ + dev_dbg_f(zd_usb_dev(usb), "\n"); + + zd_op_stop(zd_usb_to_hw(usb)); + + zd_usb_disable_tx(usb); + zd_usb_disable_rx(usb); + zd_usb_disable_int(usb); + + usb->initialized = 0; +} + +static int pre_reset(struct usb_interface *intf) +{ + struct ieee80211_hw *hw = usb_get_intfdata(intf); + struct zd_mac *mac; + struct zd_usb *usb; + + if (!hw || intf->condition != USB_INTERFACE_BOUND) + return 0; + + mac = zd_hw_mac(hw); + usb = &mac->chip.usb; + + usb->was_running = test_bit(ZD_DEVICE_RUNNING, &mac->flags); + + zd_usb_stop(usb); + + mutex_lock(&mac->chip.mutex); + return 0; +} + +static int post_reset(struct usb_interface *intf) +{ + struct ieee80211_hw *hw = usb_get_intfdata(intf); + struct zd_mac *mac; + struct zd_usb *usb; + + if (!hw || intf->condition != USB_INTERFACE_BOUND) + return 0; + + mac = zd_hw_mac(hw); + usb = &mac->chip.usb; + + mutex_unlock(&mac->chip.mutex); + + if (usb->was_running) + zd_usb_resume(usb); + return 0; +} + +static struct usb_driver driver = { + .name = KBUILD_MODNAME, + .id_table = usb_ids, + .probe = probe, + .disconnect = disconnect, + .pre_reset = pre_reset, + .post_reset = post_reset, + .disable_hub_initiated_lpm = 1, +}; + +struct workqueue_struct *zd_workqueue; + +static int __init usb_init(void) +{ + int r; + + pr_debug("%s usb_init()\n", driver.name); + + zd_workqueue = create_singlethread_workqueue(driver.name); + if (zd_workqueue == NULL) { + printk(KERN_ERR "%s couldn't create workqueue\n", driver.name); + return -ENOMEM; + } + + r = usb_register(&driver); + if (r) { + destroy_workqueue(zd_workqueue); + printk(KERN_ERR "%s usb_register() failed. Error number %d\n", + driver.name, r); + return r; + } + + pr_debug("%s initialized\n", driver.name); + return 0; +} + +static void __exit usb_exit(void) +{ + pr_debug("%s usb_exit()\n", driver.name); + usb_deregister(&driver); + destroy_workqueue(zd_workqueue); +} + +module_init(usb_init); +module_exit(usb_exit); + +static int zd_ep_regs_out_msg(struct usb_device *udev, void *data, int len, + int *actual_length, int timeout) +{ + /* In USB 2.0 mode EP_REGS_OUT endpoint is interrupt type. However in + * USB 1.1 mode endpoint is bulk. Select correct type URB by endpoint + * descriptor. + */ + struct usb_host_endpoint *ep; + unsigned int pipe; + + pipe = usb_sndintpipe(udev, EP_REGS_OUT); + ep = usb_pipe_endpoint(udev, pipe); + if (!ep) + return -EINVAL; + + if (usb_endpoint_xfer_int(&ep->desc)) { + return usb_interrupt_msg(udev, pipe, data, len, + actual_length, timeout); + } else { + pipe = usb_sndbulkpipe(udev, EP_REGS_OUT); + return usb_bulk_msg(udev, pipe, data, len, actual_length, + timeout); + } +} + +static void prepare_read_regs_int(struct zd_usb *usb, + struct usb_req_read_regs *req, + unsigned int count) +{ + struct zd_usb_interrupt *intr = &usb->intr; + + spin_lock_irq(&intr->lock); + atomic_set(&intr->read_regs_enabled, 1); + intr->read_regs.req = req; + intr->read_regs.req_count = count; + reinit_completion(&intr->read_regs.completion); + spin_unlock_irq(&intr->lock); +} + +static void disable_read_regs_int(struct zd_usb *usb) +{ + struct zd_usb_interrupt *intr = &usb->intr; + + spin_lock_irq(&intr->lock); + atomic_set(&intr->read_regs_enabled, 0); + spin_unlock_irq(&intr->lock); +} + +static bool check_read_regs(struct zd_usb *usb, struct usb_req_read_regs *req, + unsigned int count) +{ + int i; + struct zd_usb_interrupt *intr = &usb->intr; + struct read_regs_int *rr = &intr->read_regs; + struct usb_int_regs *regs = (struct usb_int_regs *)rr->buffer; + + /* The created block size seems to be larger than expected. + * However results appear to be correct. + */ + if (rr->length < struct_size(regs, regs, count)) { + dev_dbg_f(zd_usb_dev(usb), + "error: actual length %d less than expected %zu\n", + rr->length, struct_size(regs, regs, count)); + return false; + } + + if (rr->length > sizeof(rr->buffer)) { + dev_dbg_f(zd_usb_dev(usb), + "error: actual length %d exceeds buffer size %zu\n", + rr->length, sizeof(rr->buffer)); + return false; + } + + for (i = 0; i < count; i++) { + struct reg_data *rd = ®s->regs[i]; + if (rd->addr != req->addr[i]) { + dev_dbg_f(zd_usb_dev(usb), + "rd[%d] addr %#06hx expected %#06hx\n", i, + le16_to_cpu(rd->addr), + le16_to_cpu(req->addr[i])); + return false; + } + } + + return true; +} + +static int get_results(struct zd_usb *usb, u16 *values, + struct usb_req_read_regs *req, unsigned int count, + bool *retry) +{ + int r; + int i; + struct zd_usb_interrupt *intr = &usb->intr; + struct read_regs_int *rr = &intr->read_regs; + struct usb_int_regs *regs = (struct usb_int_regs *)rr->buffer; + + spin_lock_irq(&intr->lock); + + r = -EIO; + + /* Read failed because firmware bug? */ + *retry = !!intr->read_regs_int_overridden; + if (*retry) + goto error_unlock; + + if (!check_read_regs(usb, req, count)) { + dev_dbg_f(zd_usb_dev(usb), "error: invalid read regs\n"); + goto error_unlock; + } + + for (i = 0; i < count; i++) { + struct reg_data *rd = ®s->regs[i]; + values[i] = le16_to_cpu(rd->value); + } + + r = 0; +error_unlock: + spin_unlock_irq(&intr->lock); + return r; +} + +int zd_usb_ioread16v(struct zd_usb *usb, u16 *values, + const zd_addr_t *addresses, unsigned int count) +{ + int r, i, req_len, actual_req_len, try_count = 0; + struct usb_device *udev; + struct usb_req_read_regs *req = NULL; + unsigned long timeout; + bool retry = false; + + if (count < 1) { + dev_dbg_f(zd_usb_dev(usb), "error: count is zero\n"); + return -EINVAL; + } + if (count > USB_MAX_IOREAD16_COUNT) { + dev_dbg_f(zd_usb_dev(usb), + "error: count %u exceeds possible max %u\n", + count, USB_MAX_IOREAD16_COUNT); + return -EINVAL; + } + if (in_atomic()) { + dev_dbg_f(zd_usb_dev(usb), + "error: io in atomic context not supported\n"); + return -EWOULDBLOCK; + } + if (!usb_int_enabled(usb)) { + dev_dbg_f(zd_usb_dev(usb), + "error: usb interrupt not enabled\n"); + return -EWOULDBLOCK; + } + + ZD_ASSERT(mutex_is_locked(&zd_usb_to_chip(usb)->mutex)); + BUILD_BUG_ON(sizeof(struct usb_req_read_regs) + USB_MAX_IOREAD16_COUNT * + sizeof(__le16) > sizeof(usb->req_buf)); + BUG_ON(sizeof(struct usb_req_read_regs) + count * sizeof(__le16) > + sizeof(usb->req_buf)); + + req_len = sizeof(struct usb_req_read_regs) + count * sizeof(__le16); + req = (void *)usb->req_buf; + + req->id = cpu_to_le16(USB_REQ_READ_REGS); + for (i = 0; i < count; i++) + req->addr[i] = cpu_to_le16((u16)addresses[i]); + +retry_read: + try_count++; + udev = zd_usb_to_usbdev(usb); + prepare_read_regs_int(usb, req, count); + r = zd_ep_regs_out_msg(udev, req, req_len, &actual_req_len, 50 /*ms*/); + if (r) { + dev_dbg_f(zd_usb_dev(usb), + "error in zd_ep_regs_out_msg(). Error number %d\n", r); + goto error; + } + if (req_len != actual_req_len) { + dev_dbg_f(zd_usb_dev(usb), "error in zd_ep_regs_out_msg()\n" + " req_len %d != actual_req_len %d\n", + req_len, actual_req_len); + r = -EIO; + goto error; + } + + timeout = wait_for_completion_timeout(&usb->intr.read_regs.completion, + msecs_to_jiffies(50)); + if (!timeout) { + disable_read_regs_int(usb); + dev_dbg_f(zd_usb_dev(usb), "read timed out\n"); + r = -ETIMEDOUT; + goto error; + } + + r = get_results(usb, values, req, count, &retry); + if (retry && try_count < 20) { + dev_dbg_f(zd_usb_dev(usb), "read retry, tries so far: %d\n", + try_count); + goto retry_read; + } +error: + return r; +} + +static void iowrite16v_urb_complete(struct urb *urb) +{ + struct zd_usb *usb = urb->context; + + if (urb->status && !usb->cmd_error) + usb->cmd_error = urb->status; + + if (!usb->cmd_error && + urb->actual_length != urb->transfer_buffer_length) + usb->cmd_error = -EIO; +} + +static int zd_submit_waiting_urb(struct zd_usb *usb, bool last) +{ + int r = 0; + struct urb *urb = usb->urb_async_waiting; + + if (!urb) + return 0; + + usb->urb_async_waiting = NULL; + + if (!last) + urb->transfer_flags |= URB_NO_INTERRUPT; + + usb_anchor_urb(urb, &usb->submitted_cmds); + r = usb_submit_urb(urb, GFP_KERNEL); + if (r) { + usb_unanchor_urb(urb); + dev_dbg_f(zd_usb_dev(usb), + "error in usb_submit_urb(). Error number %d\n", r); + goto error; + } + + /* fall-through with r == 0 */ +error: + usb_free_urb(urb); + return r; +} + +void zd_usb_iowrite16v_async_start(struct zd_usb *usb) +{ + ZD_ASSERT(usb_anchor_empty(&usb->submitted_cmds)); + ZD_ASSERT(usb->urb_async_waiting == NULL); + ZD_ASSERT(!usb->in_async); + + ZD_ASSERT(mutex_is_locked(&zd_usb_to_chip(usb)->mutex)); + + usb->in_async = 1; + usb->cmd_error = 0; + usb->urb_async_waiting = NULL; +} + +int zd_usb_iowrite16v_async_end(struct zd_usb *usb, unsigned int timeout) +{ + int r; + + ZD_ASSERT(mutex_is_locked(&zd_usb_to_chip(usb)->mutex)); + ZD_ASSERT(usb->in_async); + + /* Submit last iowrite16v URB */ + r = zd_submit_waiting_urb(usb, true); + if (r) { + dev_dbg_f(zd_usb_dev(usb), + "error in zd_submit_waiting_usb(). " + "Error number %d\n", r); + + usb_kill_anchored_urbs(&usb->submitted_cmds); + goto error; + } + + if (timeout) + timeout = usb_wait_anchor_empty_timeout(&usb->submitted_cmds, + timeout); + if (!timeout) { + usb_kill_anchored_urbs(&usb->submitted_cmds); + if (usb->cmd_error == -ENOENT) { + dev_dbg_f(zd_usb_dev(usb), "timed out"); + r = -ETIMEDOUT; + goto error; + } + } + + r = usb->cmd_error; +error: + usb->in_async = 0; + return r; +} + +int zd_usb_iowrite16v_async(struct zd_usb *usb, const struct zd_ioreq16 *ioreqs, + unsigned int count) +{ + int r; + struct usb_device *udev; + struct usb_req_write_regs *req = NULL; + int i, req_len; + struct urb *urb; + struct usb_host_endpoint *ep; + + ZD_ASSERT(mutex_is_locked(&zd_usb_to_chip(usb)->mutex)); + ZD_ASSERT(usb->in_async); + + if (count == 0) + return 0; + if (count > USB_MAX_IOWRITE16_COUNT) { + dev_dbg_f(zd_usb_dev(usb), + "error: count %u exceeds possible max %u\n", + count, USB_MAX_IOWRITE16_COUNT); + return -EINVAL; + } + if (in_atomic()) { + dev_dbg_f(zd_usb_dev(usb), + "error: io in atomic context not supported\n"); + return -EWOULDBLOCK; + } + + udev = zd_usb_to_usbdev(usb); + + ep = usb_pipe_endpoint(udev, usb_sndintpipe(udev, EP_REGS_OUT)); + if (!ep) + return -ENOENT; + + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) + return -ENOMEM; + + req_len = struct_size(req, reg_writes, count); + req = kmalloc(req_len, GFP_KERNEL); + if (!req) { + r = -ENOMEM; + goto error; + } + + req->id = cpu_to_le16(USB_REQ_WRITE_REGS); + for (i = 0; i < count; i++) { + struct reg_data *rw = &req->reg_writes[i]; + rw->addr = cpu_to_le16((u16)ioreqs[i].addr); + rw->value = cpu_to_le16(ioreqs[i].value); + } + + /* In USB 2.0 mode endpoint is interrupt type. However in USB 1.1 mode + * endpoint is bulk. Select correct type URB by endpoint descriptor. + */ + if (usb_endpoint_xfer_int(&ep->desc)) + usb_fill_int_urb(urb, udev, usb_sndintpipe(udev, EP_REGS_OUT), + req, req_len, iowrite16v_urb_complete, usb, + ep->desc.bInterval); + else + usb_fill_bulk_urb(urb, udev, usb_sndbulkpipe(udev, EP_REGS_OUT), + req, req_len, iowrite16v_urb_complete, usb); + + urb->transfer_flags |= URB_FREE_BUFFER; + + /* Submit previous URB */ + r = zd_submit_waiting_urb(usb, false); + if (r) { + dev_dbg_f(zd_usb_dev(usb), + "error in zd_submit_waiting_usb(). " + "Error number %d\n", r); + goto error; + } + + /* Delay submit so that URB_NO_INTERRUPT flag can be set for all URBs + * of currect batch except for very last. + */ + usb->urb_async_waiting = urb; + return 0; +error: + usb_free_urb(urb); + return r; +} + +int zd_usb_iowrite16v(struct zd_usb *usb, const struct zd_ioreq16 *ioreqs, + unsigned int count) +{ + int r; + + zd_usb_iowrite16v_async_start(usb); + r = zd_usb_iowrite16v_async(usb, ioreqs, count); + if (r) { + zd_usb_iowrite16v_async_end(usb, 0); + return r; + } + return zd_usb_iowrite16v_async_end(usb, 50 /* ms */); +} + +int zd_usb_rfwrite(struct zd_usb *usb, u32 value, u8 bits) +{ + int r; + struct usb_device *udev; + struct usb_req_rfwrite *req = NULL; + int i, req_len, actual_req_len; + u16 bit_value_template; + + if (in_atomic()) { + dev_dbg_f(zd_usb_dev(usb), + "error: io in atomic context not supported\n"); + return -EWOULDBLOCK; + } + if (bits < USB_MIN_RFWRITE_BIT_COUNT) { + dev_dbg_f(zd_usb_dev(usb), + "error: bits %d are smaller than" + " USB_MIN_RFWRITE_BIT_COUNT %d\n", + bits, USB_MIN_RFWRITE_BIT_COUNT); + return -EINVAL; + } + if (bits > USB_MAX_RFWRITE_BIT_COUNT) { + dev_dbg_f(zd_usb_dev(usb), + "error: bits %d exceed USB_MAX_RFWRITE_BIT_COUNT %d\n", + bits, USB_MAX_RFWRITE_BIT_COUNT); + return -EINVAL; + } +#ifdef DEBUG + if (value & (~0UL << bits)) { + dev_dbg_f(zd_usb_dev(usb), + "error: value %#09x has bits >= %d set\n", + value, bits); + return -EINVAL; + } +#endif /* DEBUG */ + + dev_dbg_f(zd_usb_dev(usb), "value %#09x bits %d\n", value, bits); + + r = zd_usb_ioread16(usb, &bit_value_template, ZD_CR203); + if (r) { + dev_dbg_f(zd_usb_dev(usb), + "error %d: Couldn't read ZD_CR203\n", r); + return r; + } + bit_value_template &= ~(RF_IF_LE|RF_CLK|RF_DATA); + + ZD_ASSERT(mutex_is_locked(&zd_usb_to_chip(usb)->mutex)); + BUILD_BUG_ON(sizeof(struct usb_req_rfwrite) + + USB_MAX_RFWRITE_BIT_COUNT * sizeof(__le16) > + sizeof(usb->req_buf)); + BUG_ON(sizeof(struct usb_req_rfwrite) + bits * sizeof(__le16) > + sizeof(usb->req_buf)); + + req_len = sizeof(struct usb_req_rfwrite) + bits * sizeof(__le16); + req = (void *)usb->req_buf; + + req->id = cpu_to_le16(USB_REQ_WRITE_RF); + /* 1: 3683a, but not used in ZYDAS driver */ + req->value = cpu_to_le16(2); + req->bits = cpu_to_le16(bits); + + for (i = 0; i < bits; i++) { + u16 bv = bit_value_template; + if (value & (1 << (bits-1-i))) + bv |= RF_DATA; + req->bit_values[i] = cpu_to_le16(bv); + } + + udev = zd_usb_to_usbdev(usb); + r = zd_ep_regs_out_msg(udev, req, req_len, &actual_req_len, 50 /*ms*/); + if (r) { + dev_dbg_f(zd_usb_dev(usb), + "error in zd_ep_regs_out_msg(). Error number %d\n", r); + goto out; + } + if (req_len != actual_req_len) { + dev_dbg_f(zd_usb_dev(usb), "error in zd_ep_regs_out_msg()" + " req_len %d != actual_req_len %d\n", + req_len, actual_req_len); + r = -EIO; + goto out; + } + + /* FALL-THROUGH with r == 0 */ +out: + return r; +} diff --git a/drivers/net/wireless/zydas/zd1211rw/zd_usb.h b/drivers/net/wireless/zydas/zd1211rw/zd_usb.h new file mode 100644 index 000000000..8f03b09a6 --- /dev/null +++ b/drivers/net/wireless/zydas/zd1211rw/zd_usb.h @@ -0,0 +1,280 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* ZD1211 USB-WLAN driver for Linux + * + * Copyright (C) 2005-2007 Ulrich Kunitz <kune@deine-taler.de> + * Copyright (C) 2006-2007 Daniel Drake <dsd@gentoo.org> + */ + +#ifndef _ZD_USB_H +#define _ZD_USB_H + +#include <linux/completion.h> +#include <linux/netdevice.h> +#include <linux/spinlock.h> +#include <linux/skbuff.h> +#include <linux/usb.h> + +#include "zd_def.h" + +#define ZD_USB_TX_HIGH 5 +#define ZD_USB_TX_LOW 2 + +#define ZD_TX_TIMEOUT (HZ * 5) +#define ZD_TX_WATCHDOG_INTERVAL round_jiffies_relative(HZ) +#define ZD_RX_IDLE_INTERVAL round_jiffies_relative(30 * HZ) + +enum devicetype { + DEVICE_ZD1211 = 0, + DEVICE_ZD1211B = 1, + DEVICE_INSTALLER = 2, +}; + +enum endpoints { + EP_CTRL = 0, + EP_DATA_OUT = 1, + EP_DATA_IN = 2, + EP_INT_IN = 3, + EP_REGS_OUT = 4, +}; + +enum { + USB_MAX_TRANSFER_SIZE = 4096, /* bytes */ + /* FIXME: The original driver uses this value. We have to check, + * whether the MAX_TRANSFER_SIZE is sufficient and this needs only be + * used if one combined frame is split over two USB transactions. + */ + USB_MAX_RX_SIZE = 4800, /* bytes */ + USB_MAX_IOWRITE16_COUNT = 15, + USB_MAX_IOWRITE32_COUNT = USB_MAX_IOWRITE16_COUNT/2, + USB_MAX_IOREAD16_COUNT = 15, + USB_MAX_IOREAD32_COUNT = USB_MAX_IOREAD16_COUNT/2, + USB_MIN_RFWRITE_BIT_COUNT = 16, + USB_MAX_RFWRITE_BIT_COUNT = 28, + USB_MAX_EP_INT_BUFFER = 64, + USB_ZD1211B_BCD_DEVICE = 0x4810, +}; + +enum control_requests { + USB_REQ_WRITE_REGS = 0x21, + USB_REQ_READ_REGS = 0x22, + USB_REQ_WRITE_RF = 0x23, + USB_REQ_PROG_FLASH = 0x24, + USB_REQ_EEPROM_START = 0x0128, /* ? request is a byte */ + USB_REQ_EEPROM_MID = 0x28, + USB_REQ_EEPROM_END = 0x0228, /* ? request is a byte */ + USB_REQ_FIRMWARE_DOWNLOAD = 0x30, + USB_REQ_FIRMWARE_CONFIRM = 0x31, + USB_REQ_FIRMWARE_READ_DATA = 0x32, +}; + +struct usb_req_read_regs { + __le16 id; + __le16 addr[]; +} __packed; + +struct reg_data { + __le16 addr; + __le16 value; +} __packed; + +struct usb_req_write_regs { + __le16 id; + struct reg_data reg_writes[]; +} __packed; + +enum { + RF_IF_LE = 0x02, + RF_CLK = 0x04, + RF_DATA = 0x08, +}; + +struct usb_req_rfwrite { + __le16 id; + __le16 value; + /* 1: 3683a */ + /* 2: other (default) */ + __le16 bits; + /* RF2595: 24 */ + __le16 bit_values[]; + /* (ZD_CR203 & ~(RF_IF_LE | RF_CLK | RF_DATA)) | (bit ? RF_DATA : 0) */ +} __packed; + +/* USB interrupt */ + +enum usb_int_id { + USB_INT_TYPE = 0x01, + USB_INT_ID_REGS = 0x90, + USB_INT_ID_RETRY_FAILED = 0xa0, +}; + +enum usb_int_flags { + USB_INT_READ_REGS_EN = 0x01, +}; + +struct usb_int_header { + u8 type; /* must always be 1 */ + u8 id; +} __packed; + +struct usb_int_regs { + struct usb_int_header hdr; + struct reg_data regs[]; +} __packed; + +struct usb_int_retry_fail { + struct usb_int_header hdr; + u8 new_rate; + u8 _dummy; + u8 addr[ETH_ALEN]; + u8 ibss_wakeup_dest; +} __packed; + +struct read_regs_int { + struct completion completion; + struct usb_req_read_regs *req; + unsigned int req_count; + /* Stores the USB int structure and contains the USB address of the + * first requested register before request. + */ + u8 buffer[USB_MAX_EP_INT_BUFFER]; + int length; + __le16 cr_int_addr; +}; + +struct zd_ioreq16 { + zd_addr_t addr; + u16 value; +}; + +struct zd_ioreq32 { + zd_addr_t addr; + u32 value; +}; + +struct zd_usb_interrupt { + struct read_regs_int read_regs; + spinlock_t lock; + struct urb *urb; + void *buffer; + dma_addr_t buffer_dma; + int interval; + atomic_t read_regs_enabled; + u8 read_regs_int_overridden:1; +}; + +static inline struct usb_int_regs *get_read_regs(struct zd_usb_interrupt *intr) +{ + return (struct usb_int_regs *)intr->read_regs.buffer; +} + +#define RX_URBS_COUNT 5 + +struct zd_usb_rx { + spinlock_t lock; + struct mutex setup_mutex; + struct delayed_work idle_work; + struct tasklet_struct reset_timer_tasklet; + u8 fragment[2 * USB_MAX_RX_SIZE]; + unsigned int fragment_length; + unsigned int usb_packet_size; + struct urb **urbs; + int urbs_count; +}; + +/** + * struct zd_usb_tx - structure used for transmitting frames + * @enabled: atomic enabled flag, indicates whether tx is enabled + * @lock: lock for transmission + * @submitted: anchor for URBs sent to device + * @submitted_urbs: atomic integer that counts the URBs having sent to the + * device, which haven't been completed + * @stopped: indicates whether higher level tx queues are stopped + */ +struct zd_usb_tx { + atomic_t enabled; + spinlock_t lock; + struct delayed_work watchdog_work; + struct sk_buff_head submitted_skbs; + struct usb_anchor submitted; + int submitted_urbs; + u8 stopped:1, watchdog_enabled:1; +}; + +/* Contains the usb parts. The structure doesn't require a lock because intf + * will not be changed after initialization. + */ +struct zd_usb { + struct zd_usb_interrupt intr; + struct zd_usb_rx rx; + struct zd_usb_tx tx; + struct usb_interface *intf; + struct usb_anchor submitted_cmds; + struct urb *urb_async_waiting; + int cmd_error; + u8 req_buf[64]; /* zd_usb_iowrite16v needs 62 bytes */ + u8 is_zd1211b:1, initialized:1, was_running:1, in_async:1; +}; + +#define zd_usb_dev(usb) (&usb->intf->dev) + +static inline struct usb_device *zd_usb_to_usbdev(struct zd_usb *usb) +{ + return interface_to_usbdev(usb->intf); +} + +static inline struct ieee80211_hw *zd_intf_to_hw(struct usb_interface *intf) +{ + return usb_get_intfdata(intf); +} + +static inline struct ieee80211_hw *zd_usb_to_hw(struct zd_usb *usb) +{ + return zd_intf_to_hw(usb->intf); +} + +void zd_usb_init(struct zd_usb *usb, struct ieee80211_hw *hw, + struct usb_interface *intf); +int zd_usb_init_hw(struct zd_usb *usb); +void zd_usb_clear(struct zd_usb *usb); + +int zd_usb_scnprint_id(struct zd_usb *usb, char *buffer, size_t size); + +void zd_tx_watchdog_enable(struct zd_usb *usb); +void zd_tx_watchdog_disable(struct zd_usb *usb); + +int zd_usb_enable_int(struct zd_usb *usb); +void zd_usb_disable_int(struct zd_usb *usb); + +int zd_usb_enable_rx(struct zd_usb *usb); +void zd_usb_disable_rx(struct zd_usb *usb); + +void zd_usb_reset_rx_idle_timer(struct zd_usb *usb); + +void zd_usb_enable_tx(struct zd_usb *usb); +void zd_usb_disable_tx(struct zd_usb *usb); + +int zd_usb_tx(struct zd_usb *usb, struct sk_buff *skb); + +int zd_usb_ioread16v(struct zd_usb *usb, u16 *values, + const zd_addr_t *addresses, unsigned int count); + +static inline int zd_usb_ioread16(struct zd_usb *usb, u16 *value, + const zd_addr_t addr) +{ + return zd_usb_ioread16v(usb, value, &addr, 1); +} + +void zd_usb_iowrite16v_async_start(struct zd_usb *usb); +int zd_usb_iowrite16v_async_end(struct zd_usb *usb, unsigned int timeout); +int zd_usb_iowrite16v_async(struct zd_usb *usb, const struct zd_ioreq16 *ioreqs, + unsigned int count); +int zd_usb_iowrite16v(struct zd_usb *usb, const struct zd_ioreq16 *ioreqs, + unsigned int count); + +int zd_usb_rfwrite(struct zd_usb *usb, u32 value, u8 bits); + +int zd_usb_read_fw(struct zd_usb *usb, zd_addr_t addr, u8 *data, u16 len); + +extern struct workqueue_struct *zd_workqueue; + +#endif /* _ZD_USB_H */ |