diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/pci/controller/dwc/pci-imx6.c | 1295 |
1 files changed, 1295 insertions, 0 deletions
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c new file mode 100644 index 000000000..8117f2dad --- /dev/null +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -0,0 +1,1295 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * PCIe host controller driver for Freescale i.MX6 SoCs + * + * Copyright (C) 2013 Kosagi + * https://www.kosagi.com + * + * Author: Sean Cross <xobs@kosagi.com> + */ + +#include <linux/bitfield.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/kernel.h> +#include <linux/mfd/syscon.h> +#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> +#include <linux/mfd/syscon/imx7-iomuxc-gpr.h> +#include <linux/module.h> +#include <linux/of_gpio.h> +#include <linux/of_device.h> +#include <linux/of_address.h> +#include <linux/pci.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/resource.h> +#include <linux/signal.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/reset.h> +#include <linux/pm_domain.h> +#include <linux/pm_runtime.h> + +#include "pcie-designware.h" + +#define IMX8MQ_GPR_PCIE_REF_USE_PAD BIT(9) +#define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN BIT(10) +#define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE BIT(11) +#define IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE GENMASK(11, 8) +#define IMX8MQ_PCIE2_BASE_ADDR 0x33c00000 + +#define to_imx6_pcie(x) dev_get_drvdata((x)->dev) + +enum imx6_pcie_variants { + IMX6Q, + IMX6SX, + IMX6QP, + IMX7D, + IMX8MQ, +}; + +#define IMX6_PCIE_FLAG_IMX6_PHY BIT(0) +#define IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE BIT(1) +#define IMX6_PCIE_FLAG_SUPPORTS_SUSPEND BIT(2) + +struct imx6_pcie_drvdata { + enum imx6_pcie_variants variant; + u32 flags; + int dbi_length; +}; + +struct imx6_pcie { + struct dw_pcie *pci; + int reset_gpio; + bool gpio_active_high; + struct clk *pcie_bus; + struct clk *pcie_phy; + struct clk *pcie_inbound_axi; + struct clk *pcie; + struct clk *pcie_aux; + struct regmap *iomuxc_gpr; + u32 controller_id; + struct reset_control *pciephy_reset; + struct reset_control *apps_reset; + struct reset_control *turnoff_reset; + u32 tx_deemph_gen1; + u32 tx_deemph_gen2_3p5db; + u32 tx_deemph_gen2_6db; + u32 tx_swing_full; + u32 tx_swing_low; + struct regulator *vpcie; + void __iomem *phy_base; + + /* power domain for pcie */ + struct device *pd_pcie; + /* power domain for pcie phy */ + struct device *pd_pcie_phy; + const struct imx6_pcie_drvdata *drvdata; +}; + +/* Parameters for the waiting for PCIe PHY PLL to lock on i.MX7 */ +#define PHY_PLL_LOCK_WAIT_USLEEP_MAX 200 +#define PHY_PLL_LOCK_WAIT_TIMEOUT (2000 * PHY_PLL_LOCK_WAIT_USLEEP_MAX) + +/* PCIe Port Logic registers (memory-mapped) */ +#define PL_OFFSET 0x700 + +#define PCIE_PHY_CTRL (PL_OFFSET + 0x114) +#define PCIE_PHY_CTRL_DATA(x) FIELD_PREP(GENMASK(15, 0), (x)) +#define PCIE_PHY_CTRL_CAP_ADR BIT(16) +#define PCIE_PHY_CTRL_CAP_DAT BIT(17) +#define PCIE_PHY_CTRL_WR BIT(18) +#define PCIE_PHY_CTRL_RD BIT(19) + +#define PCIE_PHY_STAT (PL_OFFSET + 0x110) +#define PCIE_PHY_STAT_ACK BIT(16) + +/* PHY registers (not memory-mapped) */ +#define PCIE_PHY_ATEOVRD 0x10 +#define PCIE_PHY_ATEOVRD_EN BIT(2) +#define PCIE_PHY_ATEOVRD_REF_CLKDIV_SHIFT 0 +#define PCIE_PHY_ATEOVRD_REF_CLKDIV_MASK 0x1 + +#define PCIE_PHY_MPLL_OVRD_IN_LO 0x11 +#define PCIE_PHY_MPLL_MULTIPLIER_SHIFT 2 +#define PCIE_PHY_MPLL_MULTIPLIER_MASK 0x7f +#define PCIE_PHY_MPLL_MULTIPLIER_OVRD BIT(9) + +#define PCIE_PHY_RX_ASIC_OUT 0x100D +#define PCIE_PHY_RX_ASIC_OUT_VALID (1 << 0) + +/* iMX7 PCIe PHY registers */ +#define PCIE_PHY_CMN_REG4 0x14 +/* These are probably the bits that *aren't* DCC_FB_EN */ +#define PCIE_PHY_CMN_REG4_DCC_FB_EN 0x29 + +#define PCIE_PHY_CMN_REG15 0x54 +#define PCIE_PHY_CMN_REG15_DLY_4 BIT(2) +#define PCIE_PHY_CMN_REG15_PLL_PD BIT(5) +#define PCIE_PHY_CMN_REG15_OVRD_PLL_PD BIT(7) + +#define PCIE_PHY_CMN_REG24 0x90 +#define PCIE_PHY_CMN_REG24_RX_EQ BIT(6) +#define PCIE_PHY_CMN_REG24_RX_EQ_SEL BIT(3) + +#define PCIE_PHY_CMN_REG26 0x98 +#define PCIE_PHY_CMN_REG26_ATT_MODE 0xBC + +#define PHY_RX_OVRD_IN_LO 0x1005 +#define PHY_RX_OVRD_IN_LO_RX_DATA_EN BIT(5) +#define PHY_RX_OVRD_IN_LO_RX_PLL_EN BIT(3) + +static int pcie_phy_poll_ack(struct imx6_pcie *imx6_pcie, bool exp_val) +{ + struct dw_pcie *pci = imx6_pcie->pci; + bool val; + u32 max_iterations = 10; + u32 wait_counter = 0; + + do { + val = dw_pcie_readl_dbi(pci, PCIE_PHY_STAT) & + PCIE_PHY_STAT_ACK; + wait_counter++; + + if (val == exp_val) + return 0; + + udelay(1); + } while (wait_counter < max_iterations); + + return -ETIMEDOUT; +} + +static int pcie_phy_wait_ack(struct imx6_pcie *imx6_pcie, int addr) +{ + struct dw_pcie *pci = imx6_pcie->pci; + u32 val; + int ret; + + val = PCIE_PHY_CTRL_DATA(addr); + dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, val); + + val |= PCIE_PHY_CTRL_CAP_ADR; + dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, val); + + ret = pcie_phy_poll_ack(imx6_pcie, true); + if (ret) + return ret; + + val = PCIE_PHY_CTRL_DATA(addr); + dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, val); + + return pcie_phy_poll_ack(imx6_pcie, false); +} + +/* Read from the 16-bit PCIe PHY control registers (not memory-mapped) */ +static int pcie_phy_read(struct imx6_pcie *imx6_pcie, int addr, u16 *data) +{ + struct dw_pcie *pci = imx6_pcie->pci; + u32 phy_ctl; + int ret; + + ret = pcie_phy_wait_ack(imx6_pcie, addr); + if (ret) + return ret; + + /* assert Read signal */ + phy_ctl = PCIE_PHY_CTRL_RD; + dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, phy_ctl); + + ret = pcie_phy_poll_ack(imx6_pcie, true); + if (ret) + return ret; + + *data = dw_pcie_readl_dbi(pci, PCIE_PHY_STAT); + + /* deassert Read signal */ + dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, 0x00); + + return pcie_phy_poll_ack(imx6_pcie, false); +} + +static int pcie_phy_write(struct imx6_pcie *imx6_pcie, int addr, u16 data) +{ + struct dw_pcie *pci = imx6_pcie->pci; + u32 var; + int ret; + + /* write addr */ + /* cap addr */ + ret = pcie_phy_wait_ack(imx6_pcie, addr); + if (ret) + return ret; + + var = PCIE_PHY_CTRL_DATA(data); + dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, var); + + /* capture data */ + var |= PCIE_PHY_CTRL_CAP_DAT; + dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, var); + + ret = pcie_phy_poll_ack(imx6_pcie, true); + if (ret) + return ret; + + /* deassert cap data */ + var = PCIE_PHY_CTRL_DATA(data); + dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, var); + + /* wait for ack de-assertion */ + ret = pcie_phy_poll_ack(imx6_pcie, false); + if (ret) + return ret; + + /* assert wr signal */ + var = PCIE_PHY_CTRL_WR; + dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, var); + + /* wait for ack */ + ret = pcie_phy_poll_ack(imx6_pcie, true); + if (ret) + return ret; + + /* deassert wr signal */ + var = PCIE_PHY_CTRL_DATA(data); + dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, var); + + /* wait for ack de-assertion */ + ret = pcie_phy_poll_ack(imx6_pcie, false); + if (ret) + return ret; + + dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, 0x0); + + return 0; +} + +static void imx6_pcie_reset_phy(struct imx6_pcie *imx6_pcie) +{ + u16 tmp; + + if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_IMX6_PHY)) + return; + + pcie_phy_read(imx6_pcie, PHY_RX_OVRD_IN_LO, &tmp); + tmp |= (PHY_RX_OVRD_IN_LO_RX_DATA_EN | + PHY_RX_OVRD_IN_LO_RX_PLL_EN); + pcie_phy_write(imx6_pcie, PHY_RX_OVRD_IN_LO, tmp); + + usleep_range(2000, 3000); + + pcie_phy_read(imx6_pcie, PHY_RX_OVRD_IN_LO, &tmp); + tmp &= ~(PHY_RX_OVRD_IN_LO_RX_DATA_EN | + PHY_RX_OVRD_IN_LO_RX_PLL_EN); + pcie_phy_write(imx6_pcie, PHY_RX_OVRD_IN_LO, tmp); +} + +#ifdef CONFIG_ARM +/* Added for PCI abort handling */ +static int imx6q_pcie_abort_handler(unsigned long addr, + unsigned int fsr, struct pt_regs *regs) +{ + unsigned long pc = instruction_pointer(regs); + unsigned long instr = *(unsigned long *)pc; + int reg = (instr >> 12) & 15; + + /* + * If the instruction being executed was a read, + * make it look like it read all-ones. + */ + if ((instr & 0x0c100000) == 0x04100000) { + unsigned long val; + + if (instr & 0x00400000) + val = 255; + else + val = -1; + + regs->uregs[reg] = val; + regs->ARM_pc += 4; + return 0; + } + + if ((instr & 0x0e100090) == 0x00100090) { + regs->uregs[reg] = -1; + regs->ARM_pc += 4; + return 0; + } + + return 1; +} +#endif + +static int imx6_pcie_attach_pd(struct device *dev) +{ + struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev); + struct device_link *link; + + /* Do nothing when in a single power domain */ + if (dev->pm_domain) + return 0; + + imx6_pcie->pd_pcie = dev_pm_domain_attach_by_name(dev, "pcie"); + if (IS_ERR(imx6_pcie->pd_pcie)) + return PTR_ERR(imx6_pcie->pd_pcie); + /* Do nothing when power domain missing */ + if (!imx6_pcie->pd_pcie) + return 0; + link = device_link_add(dev, imx6_pcie->pd_pcie, + DL_FLAG_STATELESS | + DL_FLAG_PM_RUNTIME | + DL_FLAG_RPM_ACTIVE); + if (!link) { + dev_err(dev, "Failed to add device_link to pcie pd.\n"); + return -EINVAL; + } + + imx6_pcie->pd_pcie_phy = dev_pm_domain_attach_by_name(dev, "pcie_phy"); + if (IS_ERR(imx6_pcie->pd_pcie_phy)) + return PTR_ERR(imx6_pcie->pd_pcie_phy); + + link = device_link_add(dev, imx6_pcie->pd_pcie_phy, + DL_FLAG_STATELESS | + DL_FLAG_PM_RUNTIME | + DL_FLAG_RPM_ACTIVE); + if (!link) { + dev_err(dev, "Failed to add device_link to pcie_phy pd.\n"); + return -EINVAL; + } + + return 0; +} + +static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie) +{ + struct device *dev = imx6_pcie->pci->dev; + + switch (imx6_pcie->drvdata->variant) { + case IMX7D: + case IMX8MQ: + reset_control_assert(imx6_pcie->pciephy_reset); + reset_control_assert(imx6_pcie->apps_reset); + break; + case IMX6SX: + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, + IMX6SX_GPR12_PCIE_TEST_POWERDOWN, + IMX6SX_GPR12_PCIE_TEST_POWERDOWN); + /* Force PCIe PHY reset */ + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR5, + IMX6SX_GPR5_PCIE_BTNRST_RESET, + IMX6SX_GPR5_PCIE_BTNRST_RESET); + break; + case IMX6QP: + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, + IMX6Q_GPR1_PCIE_SW_RST, + IMX6Q_GPR1_PCIE_SW_RST); + break; + case IMX6Q: + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, + IMX6Q_GPR1_PCIE_TEST_PD, 1 << 18); + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, + IMX6Q_GPR1_PCIE_REF_CLK_EN, 0 << 16); + break; + } + + if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) { + int ret = regulator_disable(imx6_pcie->vpcie); + + if (ret) + dev_err(dev, "failed to disable vpcie regulator: %d\n", + ret); + } + + /* Some boards don't have PCIe reset GPIO. */ + if (gpio_is_valid(imx6_pcie->reset_gpio)) + gpio_set_value_cansleep(imx6_pcie->reset_gpio, + imx6_pcie->gpio_active_high); +} + +static unsigned int imx6_pcie_grp_offset(const struct imx6_pcie *imx6_pcie) +{ + WARN_ON(imx6_pcie->drvdata->variant != IMX8MQ); + return imx6_pcie->controller_id == 1 ? IOMUXC_GPR16 : IOMUXC_GPR14; +} + +static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie) +{ + struct dw_pcie *pci = imx6_pcie->pci; + struct device *dev = pci->dev; + unsigned int offset; + int ret = 0; + + switch (imx6_pcie->drvdata->variant) { + case IMX6SX: + ret = clk_prepare_enable(imx6_pcie->pcie_inbound_axi); + if (ret) { + dev_err(dev, "unable to enable pcie_axi clock\n"); + break; + } + + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, + IMX6SX_GPR12_PCIE_TEST_POWERDOWN, 0); + break; + case IMX6QP: + case IMX6Q: + /* power up core phy and enable ref clock */ + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, + IMX6Q_GPR1_PCIE_TEST_PD, 0 << 18); + /* + * the async reset input need ref clock to sync internally, + * when the ref clock comes after reset, internal synced + * reset time is too short, cannot meet the requirement. + * add one ~10us delay here. + */ + usleep_range(10, 100); + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, + IMX6Q_GPR1_PCIE_REF_CLK_EN, 1 << 16); + break; + case IMX7D: + break; + case IMX8MQ: + ret = clk_prepare_enable(imx6_pcie->pcie_aux); + if (ret) { + dev_err(dev, "unable to enable pcie_aux clock\n"); + break; + } + + offset = imx6_pcie_grp_offset(imx6_pcie); + /* + * Set the over ride low and enabled + * make sure that REF_CLK is turned on. + */ + regmap_update_bits(imx6_pcie->iomuxc_gpr, offset, + IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE, + 0); + regmap_update_bits(imx6_pcie->iomuxc_gpr, offset, + IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN, + IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN); + break; + } + + return ret; +} + +static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie *imx6_pcie) +{ + u32 val; + struct device *dev = imx6_pcie->pci->dev; + + if (regmap_read_poll_timeout(imx6_pcie->iomuxc_gpr, + IOMUXC_GPR22, val, + val & IMX7D_GPR22_PCIE_PHY_PLL_LOCKED, + PHY_PLL_LOCK_WAIT_USLEEP_MAX, + PHY_PLL_LOCK_WAIT_TIMEOUT)) + dev_err(dev, "PCIe PLL lock timeout\n"); +} + +static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie) +{ + struct dw_pcie *pci = imx6_pcie->pci; + struct device *dev = pci->dev; + int ret; + + if (imx6_pcie->vpcie && !regulator_is_enabled(imx6_pcie->vpcie)) { + ret = regulator_enable(imx6_pcie->vpcie); + if (ret) { + dev_err(dev, "failed to enable vpcie regulator: %d\n", + ret); + return; + } + } + + ret = clk_prepare_enable(imx6_pcie->pcie_phy); + if (ret) { + dev_err(dev, "unable to enable pcie_phy clock\n"); + goto err_pcie_phy; + } + + ret = clk_prepare_enable(imx6_pcie->pcie_bus); + if (ret) { + dev_err(dev, "unable to enable pcie_bus clock\n"); + goto err_pcie_bus; + } + + ret = clk_prepare_enable(imx6_pcie->pcie); + if (ret) { + dev_err(dev, "unable to enable pcie clock\n"); + goto err_pcie; + } + + ret = imx6_pcie_enable_ref_clk(imx6_pcie); + if (ret) { + dev_err(dev, "unable to enable pcie ref clock\n"); + goto err_ref_clk; + } + + /* allow the clocks to stabilize */ + usleep_range(200, 500); + + switch (imx6_pcie->drvdata->variant) { + case IMX8MQ: + reset_control_deassert(imx6_pcie->pciephy_reset); + break; + case IMX7D: + reset_control_deassert(imx6_pcie->pciephy_reset); + + /* Workaround for ERR010728, failure of PCI-e PLL VCO to + * oscillate, especially when cold. This turns off "Duty-cycle + * Corrector" and other mysterious undocumented things. + */ + if (likely(imx6_pcie->phy_base)) { + /* De-assert DCC_FB_EN */ + writel(PCIE_PHY_CMN_REG4_DCC_FB_EN, + imx6_pcie->phy_base + PCIE_PHY_CMN_REG4); + /* Assert RX_EQS and RX_EQS_SEL */ + writel(PCIE_PHY_CMN_REG24_RX_EQ_SEL + | PCIE_PHY_CMN_REG24_RX_EQ, + imx6_pcie->phy_base + PCIE_PHY_CMN_REG24); + /* Assert ATT_MODE */ + writel(PCIE_PHY_CMN_REG26_ATT_MODE, + imx6_pcie->phy_base + PCIE_PHY_CMN_REG26); + } else { + dev_warn(dev, "Unable to apply ERR010728 workaround. DT missing fsl,imx7d-pcie-phy phandle ?\n"); + } + + imx7d_pcie_wait_for_phy_pll_lock(imx6_pcie); + break; + case IMX6SX: + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR5, + IMX6SX_GPR5_PCIE_BTNRST_RESET, 0); + break; + case IMX6QP: + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, + IMX6Q_GPR1_PCIE_SW_RST, 0); + + usleep_range(200, 500); + break; + case IMX6Q: /* Nothing to do */ + break; + } + + /* Some boards don't have PCIe reset GPIO. */ + if (gpio_is_valid(imx6_pcie->reset_gpio)) { + msleep(100); + gpio_set_value_cansleep(imx6_pcie->reset_gpio, + !imx6_pcie->gpio_active_high); + /* Wait for 100ms after PERST# deassertion (PCIe r5.0, 6.6.1) */ + msleep(100); + } + + return; + +err_ref_clk: + clk_disable_unprepare(imx6_pcie->pcie); +err_pcie: + clk_disable_unprepare(imx6_pcie->pcie_bus); +err_pcie_bus: + clk_disable_unprepare(imx6_pcie->pcie_phy); +err_pcie_phy: + if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) { + ret = regulator_disable(imx6_pcie->vpcie); + if (ret) + dev_err(dev, "failed to disable vpcie regulator: %d\n", + ret); + } +} + +static void imx6_pcie_configure_type(struct imx6_pcie *imx6_pcie) +{ + unsigned int mask, val; + + if (imx6_pcie->drvdata->variant == IMX8MQ && + imx6_pcie->controller_id == 1) { + mask = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE; + val = FIELD_PREP(IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE, + PCI_EXP_TYPE_ROOT_PORT); + } else { + mask = IMX6Q_GPR12_DEVICE_TYPE; + val = FIELD_PREP(IMX6Q_GPR12_DEVICE_TYPE, + PCI_EXP_TYPE_ROOT_PORT); + } + + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, mask, val); +} + +static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie) +{ + switch (imx6_pcie->drvdata->variant) { + case IMX8MQ: + /* + * TODO: Currently this code assumes external + * oscillator is being used + */ + regmap_update_bits(imx6_pcie->iomuxc_gpr, + imx6_pcie_grp_offset(imx6_pcie), + IMX8MQ_GPR_PCIE_REF_USE_PAD, + IMX8MQ_GPR_PCIE_REF_USE_PAD); + break; + case IMX7D: + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, + IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, 0); + break; + case IMX6SX: + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, + IMX6SX_GPR12_PCIE_RX_EQ_MASK, + IMX6SX_GPR12_PCIE_RX_EQ_2); + fallthrough; + default: + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, + IMX6Q_GPR12_PCIE_CTL_2, 0 << 10); + + /* configure constant input signal to the pcie ctrl and phy */ + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, + IMX6Q_GPR12_LOS_LEVEL, 9 << 4); + + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, + IMX6Q_GPR8_TX_DEEMPH_GEN1, + imx6_pcie->tx_deemph_gen1 << 0); + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, + IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB, + imx6_pcie->tx_deemph_gen2_3p5db << 6); + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, + IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB, + imx6_pcie->tx_deemph_gen2_6db << 12); + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, + IMX6Q_GPR8_TX_SWING_FULL, + imx6_pcie->tx_swing_full << 18); + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, + IMX6Q_GPR8_TX_SWING_LOW, + imx6_pcie->tx_swing_low << 25); + break; + } + + imx6_pcie_configure_type(imx6_pcie); +} + +static int imx6_setup_phy_mpll(struct imx6_pcie *imx6_pcie) +{ + unsigned long phy_rate = clk_get_rate(imx6_pcie->pcie_phy); + int mult, div; + u16 val; + + if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_IMX6_PHY)) + return 0; + + switch (phy_rate) { + case 125000000: + /* + * The default settings of the MPLL are for a 125MHz input + * clock, so no need to reconfigure anything in that case. + */ + return 0; + case 100000000: + mult = 25; + div = 0; + break; + case 200000000: + mult = 25; + div = 1; + break; + default: + dev_err(imx6_pcie->pci->dev, + "Unsupported PHY reference clock rate %lu\n", phy_rate); + return -EINVAL; + } + + pcie_phy_read(imx6_pcie, PCIE_PHY_MPLL_OVRD_IN_LO, &val); + val &= ~(PCIE_PHY_MPLL_MULTIPLIER_MASK << + PCIE_PHY_MPLL_MULTIPLIER_SHIFT); + val |= mult << PCIE_PHY_MPLL_MULTIPLIER_SHIFT; + val |= PCIE_PHY_MPLL_MULTIPLIER_OVRD; + pcie_phy_write(imx6_pcie, PCIE_PHY_MPLL_OVRD_IN_LO, val); + + pcie_phy_read(imx6_pcie, PCIE_PHY_ATEOVRD, &val); + val &= ~(PCIE_PHY_ATEOVRD_REF_CLKDIV_MASK << + PCIE_PHY_ATEOVRD_REF_CLKDIV_SHIFT); + val |= div << PCIE_PHY_ATEOVRD_REF_CLKDIV_SHIFT; + val |= PCIE_PHY_ATEOVRD_EN; + pcie_phy_write(imx6_pcie, PCIE_PHY_ATEOVRD, val); + + return 0; +} + +static int imx6_pcie_wait_for_speed_change(struct imx6_pcie *imx6_pcie) +{ + struct dw_pcie *pci = imx6_pcie->pci; + struct device *dev = pci->dev; + u32 tmp; + unsigned int retries; + + for (retries = 0; retries < 200; retries++) { + tmp = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL); + /* Test if the speed change finished. */ + if (!(tmp & PORT_LOGIC_SPEED_CHANGE)) + return 0; + usleep_range(100, 1000); + } + + dev_err(dev, "Speed change timeout\n"); + return -ETIMEDOUT; +} + +static void imx6_pcie_ltssm_enable(struct device *dev) +{ + struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev); + + switch (imx6_pcie->drvdata->variant) { + case IMX6Q: + case IMX6SX: + case IMX6QP: + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, + IMX6Q_GPR12_PCIE_CTL_2, + IMX6Q_GPR12_PCIE_CTL_2); + break; + case IMX7D: + case IMX8MQ: + reset_control_deassert(imx6_pcie->apps_reset); + break; + } +} + +static int imx6_pcie_establish_link(struct imx6_pcie *imx6_pcie) +{ + struct dw_pcie *pci = imx6_pcie->pci; + struct device *dev = pci->dev; + u8 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); + u32 tmp; + int ret; + + /* + * Force Gen1 operation when starting the link. In case the link is + * started in Gen2 mode, there is a possibility the devices on the + * bus will not be detected at all. This happens with PCIe switches. + */ + tmp = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP); + tmp &= ~PCI_EXP_LNKCAP_SLS; + tmp |= PCI_EXP_LNKCAP_SLS_2_5GB; + dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, tmp); + + /* Start LTSSM. */ + imx6_pcie_ltssm_enable(dev); + + ret = dw_pcie_wait_for_link(pci); + if (ret) + goto err_reset_phy; + + if (pci->link_gen == 2) { + /* Allow Gen2 mode after the link is up. */ + tmp = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP); + tmp &= ~PCI_EXP_LNKCAP_SLS; + tmp |= PCI_EXP_LNKCAP_SLS_5_0GB; + dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, tmp); + + /* + * Start Directed Speed Change so the best possible + * speed both link partners support can be negotiated. + */ + tmp = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL); + tmp |= PORT_LOGIC_SPEED_CHANGE; + dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, tmp); + + if (imx6_pcie->drvdata->flags & + IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE) { + /* + * On i.MX7, DIRECT_SPEED_CHANGE behaves differently + * from i.MX6 family when no link speed transition + * occurs and we go Gen1 -> yep, Gen1. The difference + * is that, in such case, it will not be cleared by HW + * which will cause the following code to report false + * failure. + */ + + ret = imx6_pcie_wait_for_speed_change(imx6_pcie); + if (ret) { + dev_err(dev, "Failed to bring link up!\n"); + goto err_reset_phy; + } + } + + /* Make sure link training is finished as well! */ + ret = dw_pcie_wait_for_link(pci); + if (ret) { + dev_err(dev, "Failed to bring link up!\n"); + goto err_reset_phy; + } + } else { + dev_info(dev, "Link: Gen2 disabled\n"); + } + + tmp = dw_pcie_readw_dbi(pci, offset + PCI_EXP_LNKSTA); + dev_info(dev, "Link up, Gen%i\n", tmp & PCI_EXP_LNKSTA_CLS); + return 0; + +err_reset_phy: + dev_dbg(dev, "PHY DEBUG_R0=0x%08x DEBUG_R1=0x%08x\n", + dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG0), + dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG1)); + imx6_pcie_reset_phy(imx6_pcie); + return ret; +} + +static int imx6_pcie_host_init(struct pcie_port *pp) +{ + struct dw_pcie *pci = to_dw_pcie_from_pp(pp); + struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci); + + imx6_pcie_assert_core_reset(imx6_pcie); + imx6_pcie_init_phy(imx6_pcie); + imx6_pcie_deassert_core_reset(imx6_pcie); + imx6_setup_phy_mpll(imx6_pcie); + dw_pcie_setup_rc(pp); + imx6_pcie_establish_link(imx6_pcie); + dw_pcie_msi_init(pp); + + return 0; +} + +static const struct dw_pcie_host_ops imx6_pcie_host_ops = { + .host_init = imx6_pcie_host_init, +}; + +static int imx6_add_pcie_port(struct imx6_pcie *imx6_pcie, + struct platform_device *pdev) +{ + struct dw_pcie *pci = imx6_pcie->pci; + struct pcie_port *pp = &pci->pp; + struct device *dev = &pdev->dev; + int ret; + + if (IS_ENABLED(CONFIG_PCI_MSI)) { + pp->msi_irq = platform_get_irq_byname(pdev, "msi"); + if (pp->msi_irq < 0) + return pp->msi_irq; + } + + pp->ops = &imx6_pcie_host_ops; + + ret = dw_pcie_host_init(pp); + if (ret) { + dev_err(dev, "failed to initialize host\n"); + return ret; + } + + return 0; +} + +static const struct dw_pcie_ops dw_pcie_ops = { + /* No special ops needed, but pcie-designware still expects this struct */ +}; + +#ifdef CONFIG_PM_SLEEP +static void imx6_pcie_ltssm_disable(struct device *dev) +{ + struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev); + + switch (imx6_pcie->drvdata->variant) { + case IMX6SX: + case IMX6QP: + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, + IMX6Q_GPR12_PCIE_CTL_2, 0); + break; + case IMX7D: + reset_control_assert(imx6_pcie->apps_reset); + break; + default: + dev_err(dev, "ltssm_disable not supported\n"); + } +} + +static void imx6_pcie_pm_turnoff(struct imx6_pcie *imx6_pcie) +{ + struct device *dev = imx6_pcie->pci->dev; + + /* Some variants have a turnoff reset in DT */ + if (imx6_pcie->turnoff_reset) { + reset_control_assert(imx6_pcie->turnoff_reset); + reset_control_deassert(imx6_pcie->turnoff_reset); + goto pm_turnoff_sleep; + } + + /* Others poke directly at IOMUXC registers */ + switch (imx6_pcie->drvdata->variant) { + case IMX6SX: + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, + IMX6SX_GPR12_PCIE_PM_TURN_OFF, + IMX6SX_GPR12_PCIE_PM_TURN_OFF); + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, + IMX6SX_GPR12_PCIE_PM_TURN_OFF, 0); + break; + default: + dev_err(dev, "PME_Turn_Off not implemented\n"); + return; + } + + /* + * Components with an upstream port must respond to + * PME_Turn_Off with PME_TO_Ack but we can't check. + * + * The standard recommends a 1-10ms timeout after which to + * proceed anyway as if acks were received. + */ +pm_turnoff_sleep: + usleep_range(1000, 10000); +} + +static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie) +{ + clk_disable_unprepare(imx6_pcie->pcie); + clk_disable_unprepare(imx6_pcie->pcie_phy); + clk_disable_unprepare(imx6_pcie->pcie_bus); + + switch (imx6_pcie->drvdata->variant) { + case IMX6SX: + clk_disable_unprepare(imx6_pcie->pcie_inbound_axi); + break; + case IMX7D: + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, + IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, + IMX7D_GPR12_PCIE_PHY_REFCLK_SEL); + break; + case IMX8MQ: + clk_disable_unprepare(imx6_pcie->pcie_aux); + break; + default: + break; + } +} + +static int imx6_pcie_suspend_noirq(struct device *dev) +{ + struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev); + + if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_SUPPORTS_SUSPEND)) + return 0; + + imx6_pcie_pm_turnoff(imx6_pcie); + imx6_pcie_clk_disable(imx6_pcie); + imx6_pcie_ltssm_disable(dev); + + return 0; +} + +static int imx6_pcie_resume_noirq(struct device *dev) +{ + int ret; + struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev); + struct pcie_port *pp = &imx6_pcie->pci->pp; + + if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_SUPPORTS_SUSPEND)) + return 0; + + imx6_pcie_assert_core_reset(imx6_pcie); + imx6_pcie_init_phy(imx6_pcie); + imx6_pcie_deassert_core_reset(imx6_pcie); + dw_pcie_setup_rc(pp); + + ret = imx6_pcie_establish_link(imx6_pcie); + if (ret < 0) + dev_info(dev, "pcie link is down after resume.\n"); + + return 0; +} +#endif + +static const struct dev_pm_ops imx6_pcie_pm_ops = { + SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(imx6_pcie_suspend_noirq, + imx6_pcie_resume_noirq) +}; + +static int imx6_pcie_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct dw_pcie *pci; + struct imx6_pcie *imx6_pcie; + struct device_node *np; + struct resource *dbi_base; + struct device_node *node = dev->of_node; + int ret; + u16 val; + + imx6_pcie = devm_kzalloc(dev, sizeof(*imx6_pcie), GFP_KERNEL); + if (!imx6_pcie) + return -ENOMEM; + + pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL); + if (!pci) + return -ENOMEM; + + pci->dev = dev; + pci->ops = &dw_pcie_ops; + + imx6_pcie->pci = pci; + imx6_pcie->drvdata = of_device_get_match_data(dev); + + /* Find the PHY if one is defined, only imx7d uses it */ + np = of_parse_phandle(node, "fsl,imx7d-pcie-phy", 0); + if (np) { + struct resource res; + + ret = of_address_to_resource(np, 0, &res); + if (ret) { + dev_err(dev, "Unable to map PCIe PHY\n"); + return ret; + } + imx6_pcie->phy_base = devm_ioremap_resource(dev, &res); + if (IS_ERR(imx6_pcie->phy_base)) { + dev_err(dev, "Unable to map PCIe PHY\n"); + return PTR_ERR(imx6_pcie->phy_base); + } + } + + dbi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0); + pci->dbi_base = devm_ioremap_resource(dev, dbi_base); + if (IS_ERR(pci->dbi_base)) + return PTR_ERR(pci->dbi_base); + + /* Fetch GPIOs */ + imx6_pcie->reset_gpio = of_get_named_gpio(node, "reset-gpio", 0); + imx6_pcie->gpio_active_high = of_property_read_bool(node, + "reset-gpio-active-high"); + if (gpio_is_valid(imx6_pcie->reset_gpio)) { + ret = devm_gpio_request_one(dev, imx6_pcie->reset_gpio, + imx6_pcie->gpio_active_high ? + GPIOF_OUT_INIT_HIGH : + GPIOF_OUT_INIT_LOW, + "PCIe reset"); + if (ret) { + dev_err(dev, "unable to get reset gpio\n"); + return ret; + } + } else if (imx6_pcie->reset_gpio == -EPROBE_DEFER) { + return imx6_pcie->reset_gpio; + } + + /* Fetch clocks */ + imx6_pcie->pcie_phy = devm_clk_get(dev, "pcie_phy"); + if (IS_ERR(imx6_pcie->pcie_phy)) + return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie_phy), + "pcie_phy clock source missing or invalid\n"); + + imx6_pcie->pcie_bus = devm_clk_get(dev, "pcie_bus"); + if (IS_ERR(imx6_pcie->pcie_bus)) + return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie_bus), + "pcie_bus clock source missing or invalid\n"); + + imx6_pcie->pcie = devm_clk_get(dev, "pcie"); + if (IS_ERR(imx6_pcie->pcie)) + return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie), + "pcie clock source missing or invalid\n"); + + switch (imx6_pcie->drvdata->variant) { + case IMX6SX: + imx6_pcie->pcie_inbound_axi = devm_clk_get(dev, + "pcie_inbound_axi"); + if (IS_ERR(imx6_pcie->pcie_inbound_axi)) + return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie_inbound_axi), + "pcie_inbound_axi clock missing or invalid\n"); + break; + case IMX8MQ: + imx6_pcie->pcie_aux = devm_clk_get(dev, "pcie_aux"); + if (IS_ERR(imx6_pcie->pcie_aux)) + return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie_aux), + "pcie_aux clock source missing or invalid\n"); + fallthrough; + case IMX7D: + if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR) + imx6_pcie->controller_id = 1; + + imx6_pcie->pciephy_reset = devm_reset_control_get_exclusive(dev, + "pciephy"); + if (IS_ERR(imx6_pcie->pciephy_reset)) { + dev_err(dev, "Failed to get PCIEPHY reset control\n"); + return PTR_ERR(imx6_pcie->pciephy_reset); + } + + imx6_pcie->apps_reset = devm_reset_control_get_exclusive(dev, + "apps"); + if (IS_ERR(imx6_pcie->apps_reset)) { + dev_err(dev, "Failed to get PCIE APPS reset control\n"); + return PTR_ERR(imx6_pcie->apps_reset); + } + break; + default: + break; + } + + /* Grab turnoff reset */ + imx6_pcie->turnoff_reset = devm_reset_control_get_optional_exclusive(dev, "turnoff"); + if (IS_ERR(imx6_pcie->turnoff_reset)) { + dev_err(dev, "Failed to get TURNOFF reset control\n"); + return PTR_ERR(imx6_pcie->turnoff_reset); + } + + /* Grab GPR config register range */ + imx6_pcie->iomuxc_gpr = + syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr"); + if (IS_ERR(imx6_pcie->iomuxc_gpr)) { + dev_err(dev, "unable to find iomuxc registers\n"); + return PTR_ERR(imx6_pcie->iomuxc_gpr); + } + + /* Grab PCIe PHY Tx Settings */ + if (of_property_read_u32(node, "fsl,tx-deemph-gen1", + &imx6_pcie->tx_deemph_gen1)) + imx6_pcie->tx_deemph_gen1 = 0; + + if (of_property_read_u32(node, "fsl,tx-deemph-gen2-3p5db", + &imx6_pcie->tx_deemph_gen2_3p5db)) + imx6_pcie->tx_deemph_gen2_3p5db = 0; + + if (of_property_read_u32(node, "fsl,tx-deemph-gen2-6db", + &imx6_pcie->tx_deemph_gen2_6db)) + imx6_pcie->tx_deemph_gen2_6db = 20; + + if (of_property_read_u32(node, "fsl,tx-swing-full", + &imx6_pcie->tx_swing_full)) + imx6_pcie->tx_swing_full = 127; + + if (of_property_read_u32(node, "fsl,tx-swing-low", + &imx6_pcie->tx_swing_low)) + imx6_pcie->tx_swing_low = 127; + + /* Limit link speed */ + pci->link_gen = 1; + ret = of_property_read_u32(node, "fsl,max-link-speed", &pci->link_gen); + + imx6_pcie->vpcie = devm_regulator_get_optional(&pdev->dev, "vpcie"); + if (IS_ERR(imx6_pcie->vpcie)) { + if (PTR_ERR(imx6_pcie->vpcie) != -ENODEV) + return PTR_ERR(imx6_pcie->vpcie); + imx6_pcie->vpcie = NULL; + } + + platform_set_drvdata(pdev, imx6_pcie); + + ret = imx6_pcie_attach_pd(dev); + if (ret) + return ret; + + ret = imx6_add_pcie_port(imx6_pcie, pdev); + if (ret < 0) + return ret; + + if (pci_msi_enabled()) { + u8 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_MSI); + val = dw_pcie_readw_dbi(pci, offset + PCI_MSI_FLAGS); + val |= PCI_MSI_FLAGS_ENABLE; + dw_pcie_writew_dbi(pci, offset + PCI_MSI_FLAGS, val); + } + + return 0; +} + +static void imx6_pcie_shutdown(struct platform_device *pdev) +{ + struct imx6_pcie *imx6_pcie = platform_get_drvdata(pdev); + + /* bring down link, so bootloader gets clean state in case of reboot */ + imx6_pcie_assert_core_reset(imx6_pcie); +} + +static const struct imx6_pcie_drvdata drvdata[] = { + [IMX6Q] = { + .variant = IMX6Q, + .flags = IMX6_PCIE_FLAG_IMX6_PHY | + IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE, + .dbi_length = 0x200, + }, + [IMX6SX] = { + .variant = IMX6SX, + .flags = IMX6_PCIE_FLAG_IMX6_PHY | + IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE | + IMX6_PCIE_FLAG_SUPPORTS_SUSPEND, + }, + [IMX6QP] = { + .variant = IMX6QP, + .flags = IMX6_PCIE_FLAG_IMX6_PHY | + IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE, + }, + [IMX7D] = { + .variant = IMX7D, + .flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND, + }, + [IMX8MQ] = { + .variant = IMX8MQ, + }, +}; + +static const struct of_device_id imx6_pcie_of_match[] = { + { .compatible = "fsl,imx6q-pcie", .data = &drvdata[IMX6Q], }, + { .compatible = "fsl,imx6sx-pcie", .data = &drvdata[IMX6SX], }, + { .compatible = "fsl,imx6qp-pcie", .data = &drvdata[IMX6QP], }, + { .compatible = "fsl,imx7d-pcie", .data = &drvdata[IMX7D], }, + { .compatible = "fsl,imx8mq-pcie", .data = &drvdata[IMX8MQ], } , + {}, +}; + +static struct platform_driver imx6_pcie_driver = { + .driver = { + .name = "imx6q-pcie", + .of_match_table = imx6_pcie_of_match, + .suppress_bind_attrs = true, + .pm = &imx6_pcie_pm_ops, + .probe_type = PROBE_PREFER_ASYNCHRONOUS, + }, + .probe = imx6_pcie_probe, + .shutdown = imx6_pcie_shutdown, +}; + +static void imx6_pcie_quirk(struct pci_dev *dev) +{ + struct pci_bus *bus = dev->bus; + struct pcie_port *pp = bus->sysdata; + + /* Bus parent is the PCI bridge, its parent is this platform driver */ + if (!bus->dev.parent || !bus->dev.parent->parent) + return; + + /* Make sure we only quirk devices associated with this driver */ + if (bus->dev.parent->parent->driver != &imx6_pcie_driver.driver) + return; + + if (pci_is_root_bus(bus)) { + struct dw_pcie *pci = to_dw_pcie_from_pp(pp); + struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci); + + /* + * Limit config length to avoid the kernel reading beyond + * the register set and causing an abort on i.MX 6Quad + */ + if (imx6_pcie->drvdata->dbi_length) { + dev->cfg_size = imx6_pcie->drvdata->dbi_length; + dev_info(&dev->dev, "Limiting cfg_size to %d\n", + dev->cfg_size); + } + } +} +DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_SYNOPSYS, 0xabcd, + PCI_CLASS_BRIDGE_PCI, 8, imx6_pcie_quirk); + +static int __init imx6_pcie_init(void) +{ +#ifdef CONFIG_ARM + struct device_node *np; + + np = of_find_matching_node(NULL, imx6_pcie_of_match); + if (!np) + return -ENODEV; + of_node_put(np); + + /* + * Since probe() can be deferred we need to make sure that + * hook_fault_code is not called after __init memory is freed + * by kernel and since imx6q_pcie_abort_handler() is a no-op, + * we can install the handler here without risking it + * accessing some uninitialized driver state. + */ + hook_fault_code(8, imx6q_pcie_abort_handler, SIGBUS, 0, + "external abort on non-linefetch"); +#endif + + return platform_driver_register(&imx6_pcie_driver); +} +device_initcall(imx6_pcie_init); |