diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/phy/qualcomm/phy-qcom-usb-ss.c | 246 |
1 files changed, 246 insertions, 0 deletions
diff --git a/drivers/phy/qualcomm/phy-qcom-usb-ss.c b/drivers/phy/qualcomm/phy-qcom-usb-ss.c new file mode 100644 index 000000000..a3a6d3ce7 --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-usb-ss.c @@ -0,0 +1,246 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2012-2014,2017 The Linux Foundation. All rights reserved. + * Copyright (c) 2018-2020, Linaro Limited + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/reset.h> +#include <linux/slab.h> + +#define PHY_CTRL0 0x6C +#define PHY_CTRL1 0x70 +#define PHY_CTRL2 0x74 +#define PHY_CTRL4 0x7C + +/* PHY_CTRL bits */ +#define REF_PHY_EN BIT(0) +#define LANE0_PWR_ON BIT(2) +#define SWI_PCS_CLK_SEL BIT(4) +#define TST_PWR_DOWN BIT(4) +#define PHY_RESET BIT(7) + +#define NUM_BULK_CLKS 3 +#define NUM_BULK_REGS 2 + +struct ssphy_priv { + void __iomem *base; + struct device *dev; + struct reset_control *reset_com; + struct reset_control *reset_phy; + struct regulator_bulk_data regs[NUM_BULK_REGS]; + struct clk_bulk_data clks[NUM_BULK_CLKS]; + enum phy_mode mode; +}; + +static inline void qcom_ssphy_updatel(void __iomem *addr, u32 mask, u32 val) +{ + writel((readl(addr) & ~mask) | val, addr); +} + +static int qcom_ssphy_do_reset(struct ssphy_priv *priv) +{ + int ret; + + if (!priv->reset_com) { + qcom_ssphy_updatel(priv->base + PHY_CTRL1, PHY_RESET, + PHY_RESET); + usleep_range(10, 20); + qcom_ssphy_updatel(priv->base + PHY_CTRL1, PHY_RESET, 0); + } else { + ret = reset_control_assert(priv->reset_com); + if (ret) { + dev_err(priv->dev, "Failed to assert reset com\n"); + return ret; + } + + ret = reset_control_assert(priv->reset_phy); + if (ret) { + dev_err(priv->dev, "Failed to assert reset phy\n"); + return ret; + } + + usleep_range(10, 20); + + ret = reset_control_deassert(priv->reset_com); + if (ret) { + dev_err(priv->dev, "Failed to deassert reset com\n"); + return ret; + } + + ret = reset_control_deassert(priv->reset_phy); + if (ret) { + dev_err(priv->dev, "Failed to deassert reset phy\n"); + return ret; + } + } + + return 0; +} + +static int qcom_ssphy_power_on(struct phy *phy) +{ + struct ssphy_priv *priv = phy_get_drvdata(phy); + int ret; + + ret = regulator_bulk_enable(NUM_BULK_REGS, priv->regs); + if (ret) + return ret; + + ret = clk_bulk_prepare_enable(NUM_BULK_CLKS, priv->clks); + if (ret) + goto err_disable_regulator; + + ret = qcom_ssphy_do_reset(priv); + if (ret) + goto err_disable_clock; + + writeb(SWI_PCS_CLK_SEL, priv->base + PHY_CTRL0); + qcom_ssphy_updatel(priv->base + PHY_CTRL4, LANE0_PWR_ON, LANE0_PWR_ON); + qcom_ssphy_updatel(priv->base + PHY_CTRL2, REF_PHY_EN, REF_PHY_EN); + qcom_ssphy_updatel(priv->base + PHY_CTRL4, TST_PWR_DOWN, 0); + + return 0; +err_disable_clock: + clk_bulk_disable_unprepare(NUM_BULK_CLKS, priv->clks); +err_disable_regulator: + regulator_bulk_disable(NUM_BULK_REGS, priv->regs); + + return ret; +} + +static int qcom_ssphy_power_off(struct phy *phy) +{ + struct ssphy_priv *priv = phy_get_drvdata(phy); + + qcom_ssphy_updatel(priv->base + PHY_CTRL4, LANE0_PWR_ON, 0); + qcom_ssphy_updatel(priv->base + PHY_CTRL2, REF_PHY_EN, 0); + qcom_ssphy_updatel(priv->base + PHY_CTRL4, TST_PWR_DOWN, TST_PWR_DOWN); + + clk_bulk_disable_unprepare(NUM_BULK_CLKS, priv->clks); + regulator_bulk_disable(NUM_BULK_REGS, priv->regs); + + return 0; +} + +static int qcom_ssphy_init_clock(struct ssphy_priv *priv) +{ + priv->clks[0].id = "ref"; + priv->clks[1].id = "ahb"; + priv->clks[2].id = "pipe"; + + return devm_clk_bulk_get(priv->dev, NUM_BULK_CLKS, priv->clks); +} + +static int qcom_ssphy_init_regulator(struct ssphy_priv *priv) +{ + int ret; + + priv->regs[0].supply = "vdd"; + priv->regs[1].supply = "vdda1p8"; + ret = devm_regulator_bulk_get(priv->dev, NUM_BULK_REGS, priv->regs); + if (ret) { + if (ret != -EPROBE_DEFER) + dev_err(priv->dev, "Failed to get regulators\n"); + return ret; + } + + return ret; +} + +static int qcom_ssphy_init_reset(struct ssphy_priv *priv) +{ + priv->reset_com = devm_reset_control_get_optional_exclusive(priv->dev, "com"); + if (IS_ERR(priv->reset_com)) { + dev_err(priv->dev, "Failed to get reset control com\n"); + return PTR_ERR(priv->reset_com); + } + + if (priv->reset_com) { + /* if reset_com is present, reset_phy is no longer optional */ + priv->reset_phy = devm_reset_control_get_exclusive(priv->dev, "phy"); + if (IS_ERR(priv->reset_phy)) { + dev_err(priv->dev, "Failed to get reset control phy\n"); + return PTR_ERR(priv->reset_phy); + } + } + + return 0; +} + +static const struct phy_ops qcom_ssphy_ops = { + .power_off = qcom_ssphy_power_off, + .power_on = qcom_ssphy_power_on, + .owner = THIS_MODULE, +}; + +static int qcom_ssphy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct phy_provider *provider; + struct ssphy_priv *priv; + struct phy *phy; + int ret; + + priv = devm_kzalloc(dev, sizeof(struct ssphy_priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev = dev; + priv->mode = PHY_MODE_INVALID; + + priv->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(priv->base)) + return PTR_ERR(priv->base); + + ret = qcom_ssphy_init_clock(priv); + if (ret) + return ret; + + ret = qcom_ssphy_init_reset(priv); + if (ret) + return ret; + + ret = qcom_ssphy_init_regulator(priv); + if (ret) + return ret; + + phy = devm_phy_create(dev, dev->of_node, &qcom_ssphy_ops); + if (IS_ERR(phy)) { + dev_err(dev, "Failed to create the SS phy\n"); + return PTR_ERR(phy); + } + + phy_set_drvdata(phy, priv); + + provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(provider); +} + +static const struct of_device_id qcom_ssphy_match[] = { + { .compatible = "qcom,usb-ss-28nm-phy", }, + { }, +}; +MODULE_DEVICE_TABLE(of, qcom_ssphy_match); + +static struct platform_driver qcom_ssphy_driver = { + .probe = qcom_ssphy_probe, + .driver = { + .name = "qcom-usb-ssphy", + .of_match_table = qcom_ssphy_match, + }, +}; +module_platform_driver(qcom_ssphy_driver); + +MODULE_DESCRIPTION("Qualcomm SuperSpeed USB PHY driver"); +MODULE_LICENSE("GPL v2"); |