diff options
Diffstat (limited to 'drivers/pinctrl/pinctrl-at91.c')
| -rw-r--r-- | drivers/pinctrl/pinctrl-at91.c | 1955 |
1 files changed, 1955 insertions, 0 deletions
diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c new file mode 100644 index 000000000..52ecd47c1 --- /dev/null +++ b/drivers/pinctrl/pinctrl-at91.c @@ -0,0 +1,1955 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * at91 pinctrl driver based on at91 pinmux core + * + * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + */ + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/gpio/driver.h> +#include <linux/pinctrl/machine.h> +#include <linux/pinctrl/pinconf.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/pinmux.h> +/* Since we request GPIOs from ourself */ +#include <linux/pinctrl/consumer.h> + +#include "pinctrl-at91.h" +#include "core.h" + +#define MAX_GPIO_BANKS 5 +#define MAX_NB_GPIO_PER_BANK 32 + +struct at91_pinctrl_mux_ops; + +struct at91_gpio_chip { + struct gpio_chip chip; + struct pinctrl_gpio_range range; + struct at91_gpio_chip *next; /* Bank sharing same clock */ + int pioc_hwirq; /* PIO bank interrupt identifier on AIC */ + int pioc_virq; /* PIO bank Linux virtual interrupt */ + int pioc_idx; /* PIO bank index */ + void __iomem *regbase; /* PIO bank virtual address */ + struct clk *clock; /* associated clock */ + struct at91_pinctrl_mux_ops *ops; /* ops */ +}; + +static struct at91_gpio_chip *gpio_chips[MAX_GPIO_BANKS]; + +static int gpio_banks; + +#define PULL_UP (1 << 0) +#define MULTI_DRIVE (1 << 1) +#define DEGLITCH (1 << 2) +#define PULL_DOWN (1 << 3) +#define DIS_SCHMIT (1 << 4) +#define DRIVE_STRENGTH_SHIFT 5 +#define DRIVE_STRENGTH_MASK 0x3 +#define DRIVE_STRENGTH (DRIVE_STRENGTH_MASK << DRIVE_STRENGTH_SHIFT) +#define OUTPUT (1 << 7) +#define OUTPUT_VAL_SHIFT 8 +#define OUTPUT_VAL (0x1 << OUTPUT_VAL_SHIFT) +#define SLEWRATE_SHIFT 9 +#define SLEWRATE_MASK 0x1 +#define SLEWRATE (SLEWRATE_MASK << SLEWRATE_SHIFT) +#define DEBOUNCE (1 << 16) +#define DEBOUNCE_VAL_SHIFT 17 +#define DEBOUNCE_VAL (0x3fff << DEBOUNCE_VAL_SHIFT) + +/* + * These defines will translated the dt binding settings to our internal + * settings. They are not necessarily the same value as the register setting. + * The actual drive strength current of low, medium and high must be looked up + * from the corresponding device datasheet. This value is different for pins + * that are even in the same banks. It is also dependent on VCC. + * DRIVE_STRENGTH_DEFAULT is just a placeholder to avoid changing the drive + * strength when there is no dt config for it. + */ +enum drive_strength_bit { + DRIVE_STRENGTH_BIT_DEF, + DRIVE_STRENGTH_BIT_LOW, + DRIVE_STRENGTH_BIT_MED, + DRIVE_STRENGTH_BIT_HI, +}; + +#define DRIVE_STRENGTH_BIT_MSK(name) (DRIVE_STRENGTH_BIT_##name << \ + DRIVE_STRENGTH_SHIFT) + +enum slewrate_bit { + SLEWRATE_BIT_ENA, + SLEWRATE_BIT_DIS, +}; + +#define SLEWRATE_BIT_MSK(name) (SLEWRATE_BIT_##name << SLEWRATE_SHIFT) + +/** + * struct at91_pmx_func - describes AT91 pinmux functions + * @name: the name of this specific function + * @groups: corresponding pin groups + * @ngroups: the number of groups + */ +struct at91_pmx_func { + const char *name; + const char **groups; + unsigned ngroups; +}; + +enum at91_mux { + AT91_MUX_GPIO = 0, + AT91_MUX_PERIPH_A = 1, + AT91_MUX_PERIPH_B = 2, + AT91_MUX_PERIPH_C = 3, + AT91_MUX_PERIPH_D = 4, +}; + +/** + * struct at91_pmx_pin - describes an At91 pin mux + * @bank: the bank of the pin + * @pin: the pin number in the @bank + * @mux: the mux mode : gpio or periph_x of the pin i.e. alternate function. + * @conf: the configuration of the pin: PULL_UP, MULTIDRIVE etc... + */ +struct at91_pmx_pin { + uint32_t bank; + uint32_t pin; + enum at91_mux mux; + unsigned long conf; +}; + +/** + * struct at91_pin_group - describes an At91 pin group + * @name: the name of this specific pin group + * @pins_conf: the mux mode for each pin in this group. The size of this + * array is the same as pins. + * @pins: an array of discrete physical pins used in this group, taken + * from the driver-local pin enumeration space + * @npins: the number of pins in this group array, i.e. the number of + * elements in .pins so we can iterate over that array + */ +struct at91_pin_group { + const char *name; + struct at91_pmx_pin *pins_conf; + unsigned int *pins; + unsigned npins; +}; + +/** + * struct at91_pinctrl_mux_ops - describes an AT91 mux ops group + * on new IP with support for periph C and D the way to mux in + * periph A and B has changed + * So provide the right call back + * if not present means the IP does not support it + * @get_periph: return the periph mode configured + * @mux_A_periph: mux as periph A + * @mux_B_periph: mux as periph B + * @mux_C_periph: mux as periph C + * @mux_D_periph: mux as periph D + * @get_deglitch: get deglitch status + * @set_deglitch: enable/disable deglitch + * @get_debounce: get debounce status + * @set_debounce: enable/disable debounce + * @get_pulldown: get pulldown status + * @set_pulldown: enable/disable pulldown + * @get_schmitt_trig: get schmitt trigger status + * @disable_schmitt_trig: disable schmitt trigger + * @get_drivestrength: get driver strength + * @set_drivestrength: set driver strength + * @get_slewrate: get slew rate + * @set_slewrate: set slew rate + * @irq_type: return irq type + */ +struct at91_pinctrl_mux_ops { + enum at91_mux (*get_periph)(void __iomem *pio, unsigned mask); + void (*mux_A_periph)(void __iomem *pio, unsigned mask); + void (*mux_B_periph)(void __iomem *pio, unsigned mask); + void (*mux_C_periph)(void __iomem *pio, unsigned mask); + void (*mux_D_periph)(void __iomem *pio, unsigned mask); + bool (*get_deglitch)(void __iomem *pio, unsigned pin); + void (*set_deglitch)(void __iomem *pio, unsigned mask, bool is_on); + bool (*get_debounce)(void __iomem *pio, unsigned pin, u32 *div); + void (*set_debounce)(void __iomem *pio, unsigned mask, bool is_on, u32 div); + bool (*get_pulldown)(void __iomem *pio, unsigned pin); + void (*set_pulldown)(void __iomem *pio, unsigned mask, bool is_on); + bool (*get_schmitt_trig)(void __iomem *pio, unsigned pin); + void (*disable_schmitt_trig)(void __iomem *pio, unsigned mask); + unsigned (*get_drivestrength)(void __iomem *pio, unsigned pin); + void (*set_drivestrength)(void __iomem *pio, unsigned pin, + u32 strength); + unsigned (*get_slewrate)(void __iomem *pio, unsigned pin); + void (*set_slewrate)(void __iomem *pio, unsigned pin, u32 slewrate); + /* irq */ + int (*irq_type)(struct irq_data *d, unsigned type); +}; + +static int gpio_irq_type(struct irq_data *d, unsigned type); +static int alt_gpio_irq_type(struct irq_data *d, unsigned type); + +struct at91_pinctrl { + struct device *dev; + struct pinctrl_dev *pctl; + + int nactive_banks; + + uint32_t *mux_mask; + int nmux; + + struct at91_pmx_func *functions; + int nfunctions; + + struct at91_pin_group *groups; + int ngroups; + + struct at91_pinctrl_mux_ops *ops; +}; + +static inline const struct at91_pin_group *at91_pinctrl_find_group_by_name( + const struct at91_pinctrl *info, + const char *name) +{ + const struct at91_pin_group *grp = NULL; + int i; + + for (i = 0; i < info->ngroups; i++) { + if (strcmp(info->groups[i].name, name)) + continue; + + grp = &info->groups[i]; + dev_dbg(info->dev, "%s: %d 0:%d\n", name, grp->npins, grp->pins[0]); + break; + } + + return grp; +} + +static int at91_get_groups_count(struct pinctrl_dev *pctldev) +{ + struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + + return info->ngroups; +} + +static const char *at91_get_group_name(struct pinctrl_dev *pctldev, + unsigned selector) +{ + struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + + return info->groups[selector].name; +} + +static int at91_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector, + const unsigned **pins, + unsigned *npins) +{ + struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + + if (selector >= info->ngroups) + return -EINVAL; + + *pins = info->groups[selector].pins; + *npins = info->groups[selector].npins; + + return 0; +} + +static void at91_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s, + unsigned offset) +{ + seq_printf(s, "%s", dev_name(pctldev->dev)); +} + +static int at91_dt_node_to_map(struct pinctrl_dev *pctldev, + struct device_node *np, + struct pinctrl_map **map, unsigned *num_maps) +{ + struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + const struct at91_pin_group *grp; + struct pinctrl_map *new_map; + struct device_node *parent; + int map_num = 1; + int i; + + /* + * first find the group of this node and check if we need to create + * config maps for pins + */ + grp = at91_pinctrl_find_group_by_name(info, np->name); + if (!grp) { + dev_err(info->dev, "unable to find group for node %pOFn\n", + np); + return -EINVAL; + } + + map_num += grp->npins; + new_map = devm_kcalloc(pctldev->dev, map_num, sizeof(*new_map), + GFP_KERNEL); + if (!new_map) + return -ENOMEM; + + *map = new_map; + *num_maps = map_num; + + /* create mux map */ + parent = of_get_parent(np); + if (!parent) { + devm_kfree(pctldev->dev, new_map); + return -EINVAL; + } + new_map[0].type = PIN_MAP_TYPE_MUX_GROUP; + new_map[0].data.mux.function = parent->name; + new_map[0].data.mux.group = np->name; + of_node_put(parent); + + /* create config map */ + new_map++; + for (i = 0; i < grp->npins; i++) { + new_map[i].type = PIN_MAP_TYPE_CONFIGS_PIN; + new_map[i].data.configs.group_or_pin = + pin_get_name(pctldev, grp->pins[i]); + new_map[i].data.configs.configs = &grp->pins_conf[i].conf; + new_map[i].data.configs.num_configs = 1; + } + + dev_dbg(pctldev->dev, "maps: function %s group %s num %d\n", + (*map)->data.mux.function, (*map)->data.mux.group, map_num); + + return 0; +} + +static void at91_dt_free_map(struct pinctrl_dev *pctldev, + struct pinctrl_map *map, unsigned num_maps) +{ +} + +static const struct pinctrl_ops at91_pctrl_ops = { + .get_groups_count = at91_get_groups_count, + .get_group_name = at91_get_group_name, + .get_group_pins = at91_get_group_pins, + .pin_dbg_show = at91_pin_dbg_show, + .dt_node_to_map = at91_dt_node_to_map, + .dt_free_map = at91_dt_free_map, +}; + +static void __iomem *pin_to_controller(struct at91_pinctrl *info, + unsigned int bank) +{ + if (!gpio_chips[bank]) + return NULL; + + return gpio_chips[bank]->regbase; +} + +static inline int pin_to_bank(unsigned pin) +{ + return pin /= MAX_NB_GPIO_PER_BANK; +} + +static unsigned pin_to_mask(unsigned int pin) +{ + return 1 << pin; +} + +static unsigned two_bit_pin_value_shift_amount(unsigned int pin) +{ + /* return the shift value for a pin for "two bit" per pin registers, + * i.e. drive strength */ + return 2*((pin >= MAX_NB_GPIO_PER_BANK/2) + ? pin - MAX_NB_GPIO_PER_BANK/2 : pin); +} + +static unsigned sama5d3_get_drive_register(unsigned int pin) +{ + /* drive strength is split between two registers + * with two bits per pin */ + return (pin >= MAX_NB_GPIO_PER_BANK/2) + ? SAMA5D3_PIO_DRIVER2 : SAMA5D3_PIO_DRIVER1; +} + +static unsigned at91sam9x5_get_drive_register(unsigned int pin) +{ + /* drive strength is split between two registers + * with two bits per pin */ + return (pin >= MAX_NB_GPIO_PER_BANK/2) + ? AT91SAM9X5_PIO_DRIVER2 : AT91SAM9X5_PIO_DRIVER1; +} + +static void at91_mux_disable_interrupt(void __iomem *pio, unsigned mask) +{ + writel_relaxed(mask, pio + PIO_IDR); +} + +static unsigned at91_mux_get_pullup(void __iomem *pio, unsigned pin) +{ + return !((readl_relaxed(pio + PIO_PUSR) >> pin) & 0x1); +} + +static void at91_mux_set_pullup(void __iomem *pio, unsigned mask, bool on) +{ + if (on) + writel_relaxed(mask, pio + PIO_PPDDR); + + writel_relaxed(mask, pio + (on ? PIO_PUER : PIO_PUDR)); +} + +static bool at91_mux_get_output(void __iomem *pio, unsigned int pin, bool *val) +{ + *val = (readl_relaxed(pio + PIO_ODSR) >> pin) & 0x1; + return (readl_relaxed(pio + PIO_OSR) >> pin) & 0x1; +} + +static void at91_mux_set_output(void __iomem *pio, unsigned int mask, + bool is_on, bool val) +{ + writel_relaxed(mask, pio + (val ? PIO_SODR : PIO_CODR)); + writel_relaxed(mask, pio + (is_on ? PIO_OER : PIO_ODR)); +} + +static unsigned at91_mux_get_multidrive(void __iomem *pio, unsigned pin) +{ + return (readl_relaxed(pio + PIO_MDSR) >> pin) & 0x1; +} + +static void at91_mux_set_multidrive(void __iomem *pio, unsigned mask, bool on) +{ + writel_relaxed(mask, pio + (on ? PIO_MDER : PIO_MDDR)); +} + +static void at91_mux_set_A_periph(void __iomem *pio, unsigned mask) +{ + writel_relaxed(mask, pio + PIO_ASR); +} + +static void at91_mux_set_B_periph(void __iomem *pio, unsigned mask) +{ + writel_relaxed(mask, pio + PIO_BSR); +} + +static void at91_mux_pio3_set_A_periph(void __iomem *pio, unsigned mask) +{ + + writel_relaxed(readl_relaxed(pio + PIO_ABCDSR1) & ~mask, + pio + PIO_ABCDSR1); + writel_relaxed(readl_relaxed(pio + PIO_ABCDSR2) & ~mask, + pio + PIO_ABCDSR2); +} + +static void at91_mux_pio3_set_B_periph(void __iomem *pio, unsigned mask) +{ + writel_relaxed(readl_relaxed(pio + PIO_ABCDSR1) | mask, + pio + PIO_ABCDSR1); + writel_relaxed(readl_relaxed(pio + PIO_ABCDSR2) & ~mask, + pio + PIO_ABCDSR2); +} + +static void at91_mux_pio3_set_C_periph(void __iomem *pio, unsigned mask) +{ + writel_relaxed(readl_relaxed(pio + PIO_ABCDSR1) & ~mask, pio + PIO_ABCDSR1); + writel_relaxed(readl_relaxed(pio + PIO_ABCDSR2) | mask, pio + PIO_ABCDSR2); +} + +static void at91_mux_pio3_set_D_periph(void __iomem *pio, unsigned mask) +{ + writel_relaxed(readl_relaxed(pio + PIO_ABCDSR1) | mask, pio + PIO_ABCDSR1); + writel_relaxed(readl_relaxed(pio + PIO_ABCDSR2) | mask, pio + PIO_ABCDSR2); +} + +static enum at91_mux at91_mux_pio3_get_periph(void __iomem *pio, unsigned mask) +{ + unsigned select; + + if (readl_relaxed(pio + PIO_PSR) & mask) + return AT91_MUX_GPIO; + + select = !!(readl_relaxed(pio + PIO_ABCDSR1) & mask); + select |= (!!(readl_relaxed(pio + PIO_ABCDSR2) & mask) << 1); + + return select + 1; +} + +static enum at91_mux at91_mux_get_periph(void __iomem *pio, unsigned mask) +{ + unsigned select; + + if (readl_relaxed(pio + PIO_PSR) & mask) + return AT91_MUX_GPIO; + + select = readl_relaxed(pio + PIO_ABSR) & mask; + + return select + 1; +} + +static bool at91_mux_get_deglitch(void __iomem *pio, unsigned pin) +{ + return (readl_relaxed(pio + PIO_IFSR) >> pin) & 0x1; +} + +static void at91_mux_set_deglitch(void __iomem *pio, unsigned mask, bool is_on) +{ + writel_relaxed(mask, pio + (is_on ? PIO_IFER : PIO_IFDR)); +} + +static bool at91_mux_pio3_get_deglitch(void __iomem *pio, unsigned pin) +{ + if ((readl_relaxed(pio + PIO_IFSR) >> pin) & 0x1) + return !((readl_relaxed(pio + PIO_IFSCSR) >> pin) & 0x1); + + return false; +} + +static void at91_mux_pio3_set_deglitch(void __iomem *pio, unsigned mask, bool is_on) +{ + if (is_on) + writel_relaxed(mask, pio + PIO_IFSCDR); + at91_mux_set_deglitch(pio, mask, is_on); +} + +static bool at91_mux_pio3_get_debounce(void __iomem *pio, unsigned pin, u32 *div) +{ + *div = readl_relaxed(pio + PIO_SCDR); + + return ((readl_relaxed(pio + PIO_IFSR) >> pin) & 0x1) && + ((readl_relaxed(pio + PIO_IFSCSR) >> pin) & 0x1); +} + +static void at91_mux_pio3_set_debounce(void __iomem *pio, unsigned mask, + bool is_on, u32 div) +{ + if (is_on) { + writel_relaxed(mask, pio + PIO_IFSCER); + writel_relaxed(div & PIO_SCDR_DIV, pio + PIO_SCDR); + writel_relaxed(mask, pio + PIO_IFER); + } else + writel_relaxed(mask, pio + PIO_IFSCDR); +} + +static bool at91_mux_pio3_get_pulldown(void __iomem *pio, unsigned pin) +{ + return !((readl_relaxed(pio + PIO_PPDSR) >> pin) & 0x1); +} + +static void at91_mux_pio3_set_pulldown(void __iomem *pio, unsigned mask, bool is_on) +{ + if (is_on) + writel_relaxed(mask, pio + PIO_PUDR); + + writel_relaxed(mask, pio + (is_on ? PIO_PPDER : PIO_PPDDR)); +} + +static void at91_mux_pio3_disable_schmitt_trig(void __iomem *pio, unsigned mask) +{ + writel_relaxed(readl_relaxed(pio + PIO_SCHMITT) | mask, pio + PIO_SCHMITT); +} + +static bool at91_mux_pio3_get_schmitt_trig(void __iomem *pio, unsigned pin) +{ + return (readl_relaxed(pio + PIO_SCHMITT) >> pin) & 0x1; +} + +static inline u32 read_drive_strength(void __iomem *reg, unsigned pin) +{ + unsigned tmp = readl_relaxed(reg); + + tmp = tmp >> two_bit_pin_value_shift_amount(pin); + + return tmp & DRIVE_STRENGTH_MASK; +} + +static unsigned at91_mux_sama5d3_get_drivestrength(void __iomem *pio, + unsigned pin) +{ + unsigned tmp = read_drive_strength(pio + + sama5d3_get_drive_register(pin), pin); + + /* SAMA5 strength is 1:1 with our defines, + * except 0 is equivalent to low per datasheet */ + if (!tmp) + tmp = DRIVE_STRENGTH_BIT_MSK(LOW); + + return tmp; +} + +static unsigned at91_mux_sam9x5_get_drivestrength(void __iomem *pio, + unsigned pin) +{ + unsigned tmp = read_drive_strength(pio + + at91sam9x5_get_drive_register(pin), pin); + + /* strength is inverse in SAM9x5s hardware with the pinctrl defines + * hardware: 0 = hi, 1 = med, 2 = low, 3 = rsvd */ + tmp = DRIVE_STRENGTH_BIT_MSK(HI) - tmp; + + return tmp; +} + +static unsigned at91_mux_sam9x60_get_drivestrength(void __iomem *pio, + unsigned pin) +{ + unsigned tmp = readl_relaxed(pio + SAM9X60_PIO_DRIVER1); + + if (tmp & BIT(pin)) + return DRIVE_STRENGTH_BIT_HI; + + return DRIVE_STRENGTH_BIT_LOW; +} + +static unsigned at91_mux_sam9x60_get_slewrate(void __iomem *pio, unsigned pin) +{ + unsigned tmp = readl_relaxed(pio + SAM9X60_PIO_SLEWR); + + if ((tmp & BIT(pin))) + return SLEWRATE_BIT_ENA; + + return SLEWRATE_BIT_DIS; +} + +static void set_drive_strength(void __iomem *reg, unsigned pin, u32 strength) +{ + unsigned tmp = readl_relaxed(reg); + unsigned shift = two_bit_pin_value_shift_amount(pin); + + tmp &= ~(DRIVE_STRENGTH_MASK << shift); + tmp |= strength << shift; + + writel_relaxed(tmp, reg); +} + +static void at91_mux_sama5d3_set_drivestrength(void __iomem *pio, unsigned pin, + u32 setting) +{ + /* do nothing if setting is zero */ + if (!setting) + return; + + /* strength is 1 to 1 with setting for SAMA5 */ + set_drive_strength(pio + sama5d3_get_drive_register(pin), pin, setting); +} + +static void at91_mux_sam9x5_set_drivestrength(void __iomem *pio, unsigned pin, + u32 setting) +{ + /* do nothing if setting is zero */ + if (!setting) + return; + + /* strength is inverse on SAM9x5s with our defines + * 0 = hi, 1 = med, 2 = low, 3 = rsvd */ + setting = DRIVE_STRENGTH_BIT_MSK(HI) - setting; + + set_drive_strength(pio + at91sam9x5_get_drive_register(pin), pin, + setting); +} + +static void at91_mux_sam9x60_set_drivestrength(void __iomem *pio, unsigned pin, + u32 setting) +{ + unsigned int tmp; + + if (setting <= DRIVE_STRENGTH_BIT_DEF || + setting == DRIVE_STRENGTH_BIT_MED || + setting > DRIVE_STRENGTH_BIT_HI) + return; + + tmp = readl_relaxed(pio + SAM9X60_PIO_DRIVER1); + + /* Strength is 0: low, 1: hi */ + if (setting == DRIVE_STRENGTH_BIT_LOW) + tmp &= ~BIT(pin); + else + tmp |= BIT(pin); + + writel_relaxed(tmp, pio + SAM9X60_PIO_DRIVER1); +} + +static void at91_mux_sam9x60_set_slewrate(void __iomem *pio, unsigned pin, + u32 setting) +{ + unsigned int tmp; + + if (setting < SLEWRATE_BIT_ENA || setting > SLEWRATE_BIT_DIS) + return; + + tmp = readl_relaxed(pio + SAM9X60_PIO_SLEWR); + + if (setting == SLEWRATE_BIT_DIS) + tmp &= ~BIT(pin); + else + tmp |= BIT(pin); + + writel_relaxed(tmp, pio + SAM9X60_PIO_SLEWR); +} + +static struct at91_pinctrl_mux_ops at91rm9200_ops = { + .get_periph = at91_mux_get_periph, + .mux_A_periph = at91_mux_set_A_periph, + .mux_B_periph = at91_mux_set_B_periph, + .get_deglitch = at91_mux_get_deglitch, + .set_deglitch = at91_mux_set_deglitch, + .irq_type = gpio_irq_type, +}; + +static struct at91_pinctrl_mux_ops at91sam9x5_ops = { + .get_periph = at91_mux_pio3_get_periph, + .mux_A_periph = at91_mux_pio3_set_A_periph, + .mux_B_periph = at91_mux_pio3_set_B_periph, + .mux_C_periph = at91_mux_pio3_set_C_periph, + .mux_D_periph = at91_mux_pio3_set_D_periph, + .get_deglitch = at91_mux_pio3_get_deglitch, + .set_deglitch = at91_mux_pio3_set_deglitch, + .get_debounce = at91_mux_pio3_get_debounce, + .set_debounce = at91_mux_pio3_set_debounce, + .get_pulldown = at91_mux_pio3_get_pulldown, + .set_pulldown = at91_mux_pio3_set_pulldown, + .get_schmitt_trig = at91_mux_pio3_get_schmitt_trig, + .disable_schmitt_trig = at91_mux_pio3_disable_schmitt_trig, + .get_drivestrength = at91_mux_sam9x5_get_drivestrength, + .set_drivestrength = at91_mux_sam9x5_set_drivestrength, + .irq_type = alt_gpio_irq_type, +}; + +static const struct at91_pinctrl_mux_ops sam9x60_ops = { + .get_periph = at91_mux_pio3_get_periph, + .mux_A_periph = at91_mux_pio3_set_A_periph, + .mux_B_periph = at91_mux_pio3_set_B_periph, + .mux_C_periph = at91_mux_pio3_set_C_periph, + .mux_D_periph = at91_mux_pio3_set_D_periph, + .get_deglitch = at91_mux_pio3_get_deglitch, + .set_deglitch = at91_mux_pio3_set_deglitch, + .get_debounce = at91_mux_pio3_get_debounce, + .set_debounce = at91_mux_pio3_set_debounce, + .get_pulldown = at91_mux_pio3_get_pulldown, + .set_pulldown = at91_mux_pio3_set_pulldown, + .get_schmitt_trig = at91_mux_pio3_get_schmitt_trig, + .disable_schmitt_trig = at91_mux_pio3_disable_schmitt_trig, + .get_drivestrength = at91_mux_sam9x60_get_drivestrength, + .set_drivestrength = at91_mux_sam9x60_set_drivestrength, + .get_slewrate = at91_mux_sam9x60_get_slewrate, + .set_slewrate = at91_mux_sam9x60_set_slewrate, + .irq_type = alt_gpio_irq_type, +}; + +static struct at91_pinctrl_mux_ops sama5d3_ops = { + .get_periph = at91_mux_pio3_get_periph, + .mux_A_periph = at91_mux_pio3_set_A_periph, + .mux_B_periph = at91_mux_pio3_set_B_periph, + .mux_C_periph = at91_mux_pio3_set_C_periph, + .mux_D_periph = at91_mux_pio3_set_D_periph, + .get_deglitch = at91_mux_pio3_get_deglitch, + .set_deglitch = at91_mux_pio3_set_deglitch, + .get_debounce = at91_mux_pio3_get_debounce, + .set_debounce = at91_mux_pio3_set_debounce, + .get_pulldown = at91_mux_pio3_get_pulldown, + .set_pulldown = at91_mux_pio3_set_pulldown, + .get_schmitt_trig = at91_mux_pio3_get_schmitt_trig, + .disable_schmitt_trig = at91_mux_pio3_disable_schmitt_trig, + .get_drivestrength = at91_mux_sama5d3_get_drivestrength, + .set_drivestrength = at91_mux_sama5d3_set_drivestrength, + .irq_type = alt_gpio_irq_type, +}; + +static void at91_pin_dbg(const struct device *dev, const struct at91_pmx_pin *pin) +{ + if (pin->mux) { + dev_dbg(dev, "pio%c%d configured as periph%c with conf = 0x%lx\n", + pin->bank + 'A', pin->pin, pin->mux - 1 + 'A', pin->conf); + } else { + dev_dbg(dev, "pio%c%d configured as gpio with conf = 0x%lx\n", + pin->bank + 'A', pin->pin, pin->conf); + } +} + +static int pin_check_config(struct at91_pinctrl *info, const char *name, + int index, const struct at91_pmx_pin *pin) +{ + int mux; + + /* check if it's a valid config */ + if (pin->bank >= gpio_banks) { + dev_err(info->dev, "%s: pin conf %d bank_id %d >= nbanks %d\n", + name, index, pin->bank, gpio_banks); + return -EINVAL; + } + + if (!gpio_chips[pin->bank]) { + dev_err(info->dev, "%s: pin conf %d bank_id %d not enabled\n", + name, index, pin->bank); + return -ENXIO; + } + + if (pin->pin >= MAX_NB_GPIO_PER_BANK) { + dev_err(info->dev, "%s: pin conf %d pin_bank_id %d >= %d\n", + name, index, pin->pin, MAX_NB_GPIO_PER_BANK); + return -EINVAL; + } + + if (!pin->mux) + return 0; + + mux = pin->mux - 1; + + if (mux >= info->nmux) { + dev_err(info->dev, "%s: pin conf %d mux_id %d >= nmux %d\n", + name, index, mux, info->nmux); + return -EINVAL; + } + + if (!(info->mux_mask[pin->bank * info->nmux + mux] & 1 << pin->pin)) { + dev_err(info->dev, "%s: pin conf %d mux_id %d not supported for pio%c%d\n", + name, index, mux, pin->bank + 'A', pin->pin); + return -EINVAL; + } + + return 0; +} + +static void at91_mux_gpio_disable(void __iomem *pio, unsigned mask) +{ + writel_relaxed(mask, pio + PIO_PDR); +} + +static void at91_mux_gpio_enable(void __iomem *pio, unsigned mask, bool input) +{ + writel_relaxed(mask, pio + PIO_PER); + writel_relaxed(mask, pio + (input ? PIO_ODR : PIO_OER)); +} + +static int at91_pmx_set(struct pinctrl_dev *pctldev, unsigned selector, + unsigned group) +{ + struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + const struct at91_pmx_pin *pins_conf = info->groups[group].pins_conf; + const struct at91_pmx_pin *pin; + uint32_t npins = info->groups[group].npins; + int i, ret; + unsigned mask; + void __iomem *pio; + + dev_dbg(info->dev, "enable function %s group %s\n", + info->functions[selector].name, info->groups[group].name); + + /* first check that all the pins of the group are valid with a valid + * parameter */ + for (i = 0; i < npins; i++) { + pin = &pins_conf[i]; + ret = pin_check_config(info, info->groups[group].name, i, pin); + if (ret) + return ret; + } + + for (i = 0; i < npins; i++) { + pin = &pins_conf[i]; + at91_pin_dbg(info->dev, pin); + pio = pin_to_controller(info, pin->bank); + + if (!pio) + continue; + + mask = pin_to_mask(pin->pin); + at91_mux_disable_interrupt(pio, mask); + switch (pin->mux) { + case AT91_MUX_GPIO: + at91_mux_gpio_enable(pio, mask, 1); + break; + case AT91_MUX_PERIPH_A: + info->ops->mux_A_periph(pio, mask); + break; + case AT91_MUX_PERIPH_B: + info->ops->mux_B_periph(pio, mask); + break; + case AT91_MUX_PERIPH_C: + if (!info->ops->mux_C_periph) + return -EINVAL; + info->ops->mux_C_periph(pio, mask); + break; + case AT91_MUX_PERIPH_D: + if (!info->ops->mux_D_periph) + return -EINVAL; + info->ops->mux_D_periph(pio, mask); + break; + } + if (pin->mux) + at91_mux_gpio_disable(pio, mask); + } + + return 0; +} + +static int at91_pmx_get_funcs_count(struct pinctrl_dev *pctldev) +{ + struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + + return info->nfunctions; +} + +static const char *at91_pmx_get_func_name(struct pinctrl_dev *pctldev, + unsigned selector) +{ + struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + + return info->functions[selector].name; +} + +static int at91_pmx_get_groups(struct pinctrl_dev *pctldev, unsigned selector, + const char * const **groups, + unsigned * const num_groups) +{ + struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + + *groups = info->functions[selector].groups; + *num_groups = info->functions[selector].ngroups; + + return 0; +} + +static int at91_gpio_request_enable(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned offset) +{ + struct at91_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev); + struct at91_gpio_chip *at91_chip; + struct gpio_chip *chip; + unsigned mask; + + if (!range) { + dev_err(npct->dev, "invalid range\n"); + return -EINVAL; + } + if (!range->gc) { + dev_err(npct->dev, "missing GPIO chip in range\n"); + return -EINVAL; + } + chip = range->gc; + at91_chip = gpiochip_get_data(chip); + + dev_dbg(npct->dev, "enable pin %u as GPIO\n", offset); + + mask = 1 << (offset - chip->base); + + dev_dbg(npct->dev, "enable pin %u as PIO%c%d 0x%x\n", + offset, 'A' + range->id, offset - chip->base, mask); + + writel_relaxed(mask, at91_chip->regbase + PIO_PER); + + return 0; +} + +static void at91_gpio_disable_free(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned offset) +{ + struct at91_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev); + + dev_dbg(npct->dev, "disable pin %u as GPIO\n", offset); + /* Set the pin to some default state, GPIO is usually default */ +} + +static const struct pinmux_ops at91_pmx_ops = { + .get_functions_count = at91_pmx_get_funcs_count, + .get_function_name = at91_pmx_get_func_name, + .get_function_groups = at91_pmx_get_groups, + .set_mux = at91_pmx_set, + .gpio_request_enable = at91_gpio_request_enable, + .gpio_disable_free = at91_gpio_disable_free, +}; + +static int at91_pinconf_get(struct pinctrl_dev *pctldev, + unsigned pin_id, unsigned long *config) +{ + struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + void __iomem *pio; + unsigned pin; + int div; + bool out; + + *config = 0; + dev_dbg(info->dev, "%s:%d, pin_id=%d", __func__, __LINE__, pin_id); + pio = pin_to_controller(info, pin_to_bank(pin_id)); + + if (!pio) + return -EINVAL; + + pin = pin_id % MAX_NB_GPIO_PER_BANK; + + if (at91_mux_get_multidrive(pio, pin)) + *config |= MULTI_DRIVE; + + if (at91_mux_get_pullup(pio, pin)) + *config |= PULL_UP; + + if (info->ops->get_deglitch && info->ops->get_deglitch(pio, pin)) + *config |= DEGLITCH; + if (info->ops->get_debounce && info->ops->get_debounce(pio, pin, &div)) + *config |= DEBOUNCE | (div << DEBOUNCE_VAL_SHIFT); + if (info->ops->get_pulldown && info->ops->get_pulldown(pio, pin)) + *config |= PULL_DOWN; + if (info->ops->get_schmitt_trig && info->ops->get_schmitt_trig(pio, pin)) + *config |= DIS_SCHMIT; + if (info->ops->get_drivestrength) + *config |= (info->ops->get_drivestrength(pio, pin) + << DRIVE_STRENGTH_SHIFT); + if (info->ops->get_slewrate) + *config |= (info->ops->get_slewrate(pio, pin) << SLEWRATE_SHIFT); + if (at91_mux_get_output(pio, pin, &out)) + *config |= OUTPUT | (out << OUTPUT_VAL_SHIFT); + + return 0; +} + +static int at91_pinconf_set(struct pinctrl_dev *pctldev, + unsigned pin_id, unsigned long *configs, + unsigned num_configs) +{ + struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + unsigned mask; + void __iomem *pio; + int i; + unsigned long config; + unsigned pin; + + for (i = 0; i < num_configs; i++) { + config = configs[i]; + + dev_dbg(info->dev, + "%s:%d, pin_id=%d, config=0x%lx", + __func__, __LINE__, pin_id, config); + pio = pin_to_controller(info, pin_to_bank(pin_id)); + + if (!pio) + return -EINVAL; + + pin = pin_id % MAX_NB_GPIO_PER_BANK; + mask = pin_to_mask(pin); + + if (config & PULL_UP && config & PULL_DOWN) + return -EINVAL; + + at91_mux_set_output(pio, mask, config & OUTPUT, + (config & OUTPUT_VAL) >> OUTPUT_VAL_SHIFT); + at91_mux_set_pullup(pio, mask, config & PULL_UP); + at91_mux_set_multidrive(pio, mask, config & MULTI_DRIVE); + if (info->ops->set_deglitch) + info->ops->set_deglitch(pio, mask, config & DEGLITCH); + if (info->ops->set_debounce) + info->ops->set_debounce(pio, mask, config & DEBOUNCE, + (config & DEBOUNCE_VAL) >> DEBOUNCE_VAL_SHIFT); + if (info->ops->set_pulldown) + info->ops->set_pulldown(pio, mask, config & PULL_DOWN); + if (info->ops->disable_schmitt_trig && config & DIS_SCHMIT) + info->ops->disable_schmitt_trig(pio, mask); + if (info->ops->set_drivestrength) + info->ops->set_drivestrength(pio, pin, + (config & DRIVE_STRENGTH) + >> DRIVE_STRENGTH_SHIFT); + if (info->ops->set_slewrate) + info->ops->set_slewrate(pio, pin, + (config & SLEWRATE) >> SLEWRATE_SHIFT); + + } /* for each config */ + + return 0; +} + +#define DBG_SHOW_FLAG(flag) do { \ + if (config & flag) { \ + if (num_conf) \ + seq_puts(s, "|"); \ + seq_puts(s, #flag); \ + num_conf++; \ + } \ +} while (0) + +#define DBG_SHOW_FLAG_MASKED(mask, flag, name) do { \ + if ((config & mask) == flag) { \ + if (num_conf) \ + seq_puts(s, "|"); \ + seq_puts(s, #name); \ + num_conf++; \ + } \ +} while (0) + +static void at91_pinconf_dbg_show(struct pinctrl_dev *pctldev, + struct seq_file *s, unsigned pin_id) +{ + unsigned long config; + int val, num_conf = 0; + + at91_pinconf_get(pctldev, pin_id, &config); + + DBG_SHOW_FLAG(MULTI_DRIVE); + DBG_SHOW_FLAG(PULL_UP); + DBG_SHOW_FLAG(PULL_DOWN); + DBG_SHOW_FLAG(DIS_SCHMIT); + DBG_SHOW_FLAG(DEGLITCH); + DBG_SHOW_FLAG_MASKED(DRIVE_STRENGTH, DRIVE_STRENGTH_BIT_MSK(LOW), + DRIVE_STRENGTH_LOW); + DBG_SHOW_FLAG_MASKED(DRIVE_STRENGTH, DRIVE_STRENGTH_BIT_MSK(MED), + DRIVE_STRENGTH_MED); + DBG_SHOW_FLAG_MASKED(DRIVE_STRENGTH, DRIVE_STRENGTH_BIT_MSK(HI), + DRIVE_STRENGTH_HI); + DBG_SHOW_FLAG(SLEWRATE); + DBG_SHOW_FLAG(DEBOUNCE); + if (config & DEBOUNCE) { + val = config >> DEBOUNCE_VAL_SHIFT; + seq_printf(s, "(%d)", val); + } + + return; +} + +static void at91_pinconf_group_dbg_show(struct pinctrl_dev *pctldev, + struct seq_file *s, unsigned group) +{ +} + +static const struct pinconf_ops at91_pinconf_ops = { + .pin_config_get = at91_pinconf_get, + .pin_config_set = at91_pinconf_set, + .pin_config_dbg_show = at91_pinconf_dbg_show, + .pin_config_group_dbg_show = at91_pinconf_group_dbg_show, +}; + +static struct pinctrl_desc at91_pinctrl_desc = { + .pctlops = &at91_pctrl_ops, + .pmxops = &at91_pmx_ops, + .confops = &at91_pinconf_ops, + .owner = THIS_MODULE, +}; + +static const char *gpio_compat = "atmel,at91rm9200-gpio"; + +static void at91_pinctrl_child_count(struct at91_pinctrl *info, + struct device_node *np) +{ + struct device_node *child; + + for_each_child_of_node(np, child) { + if (of_device_is_compatible(child, gpio_compat)) { + if (of_device_is_available(child)) + info->nactive_banks++; + } else { + info->nfunctions++; + info->ngroups += of_get_child_count(child); + } + } +} + +static int at91_pinctrl_mux_mask(struct at91_pinctrl *info, + struct device_node *np) +{ + int ret = 0; + int size; + const __be32 *list; + + list = of_get_property(np, "atmel,mux-mask", &size); + if (!list) { + dev_err(info->dev, "can not read the mux-mask of %d\n", size); + return -EINVAL; + } + + size /= sizeof(*list); + if (!size || size % gpio_banks) { + dev_err(info->dev, "wrong mux mask array should be by %d\n", gpio_banks); + return -EINVAL; + } + info->nmux = size / gpio_banks; + + info->mux_mask = devm_kcalloc(info->dev, size, sizeof(u32), + GFP_KERNEL); + if (!info->mux_mask) + return -ENOMEM; + + ret = of_property_read_u32_array(np, "atmel,mux-mask", + info->mux_mask, size); + if (ret) + dev_err(info->dev, "can not read the mux-mask of %d\n", size); + return ret; +} + +static int at91_pinctrl_parse_groups(struct device_node *np, + struct at91_pin_group *grp, + struct at91_pinctrl *info, u32 index) +{ + struct at91_pmx_pin *pin; + int size; + const __be32 *list; + int i, j; + + dev_dbg(info->dev, "group(%d): %pOFn\n", index, np); + + /* Initialise group */ + grp->name = np->name; + + /* + * the binding format is atmel,pins = <bank pin mux CONFIG ...>, + * do sanity check and calculate pins number + */ + list = of_get_property(np, "atmel,pins", &size); + /* we do not check return since it's safe node passed down */ + size /= sizeof(*list); + if (!size || size % 4) { + dev_err(info->dev, "wrong pins number or pins and configs should be by 4\n"); + return -EINVAL; + } + + grp->npins = size / 4; + pin = grp->pins_conf = devm_kcalloc(info->dev, + grp->npins, + sizeof(struct at91_pmx_pin), + GFP_KERNEL); + grp->pins = devm_kcalloc(info->dev, grp->npins, sizeof(unsigned int), + GFP_KERNEL); + if (!grp->pins_conf || !grp->pins) + return -ENOMEM; + + for (i = 0, j = 0; i < size; i += 4, j++) { + pin->bank = be32_to_cpu(*list++); + pin->pin = be32_to_cpu(*list++); + grp->pins[j] = pin->bank * MAX_NB_GPIO_PER_BANK + pin->pin; + pin->mux = be32_to_cpu(*list++); + pin->conf = be32_to_cpu(*list++); + + at91_pin_dbg(info->dev, pin); + pin++; + } + + return 0; +} + +static int at91_pinctrl_parse_functions(struct device_node *np, + struct at91_pinctrl *info, u32 index) +{ + struct device_node *child; + struct at91_pmx_func *func; + struct at91_pin_group *grp; + int ret; + static u32 grp_index; + u32 i = 0; + + dev_dbg(info->dev, "parse function(%d): %pOFn\n", index, np); + + func = &info->functions[index]; + + /* Initialise function */ + func->name = np->name; + func->ngroups = of_get_child_count(np); + if (func->ngroups == 0) { + dev_err(info->dev, "no groups defined\n"); + return -EINVAL; + } + func->groups = devm_kcalloc(info->dev, + func->ngroups, sizeof(char *), GFP_KERNEL); + if (!func->groups) + return -ENOMEM; + + for_each_child_of_node(np, child) { + func->groups[i] = child->name; + grp = &info->groups[grp_index++]; + ret = at91_pinctrl_parse_groups(child, grp, info, i++); + if (ret) { + of_node_put(child); + return ret; + } + } + + return 0; +} + +static const struct of_device_id at91_pinctrl_of_match[] = { + { .compatible = "atmel,sama5d3-pinctrl", .data = &sama5d3_ops }, + { .compatible = "atmel,at91sam9x5-pinctrl", .data = &at91sam9x5_ops }, + { .compatible = "atmel,at91rm9200-pinctrl", .data = &at91rm9200_ops }, + { .compatible = "microchip,sam9x60-pinctrl", .data = &sam9x60_ops }, + { /* sentinel */ } +}; + +static int at91_pinctrl_probe_dt(struct platform_device *pdev, + struct at91_pinctrl *info) +{ + int ret = 0; + int i, j; + uint32_t *tmp; + struct device_node *np = pdev->dev.of_node; + struct device_node *child; + + if (!np) + return -ENODEV; + + info->dev = &pdev->dev; + info->ops = (struct at91_pinctrl_mux_ops *) + of_match_device(at91_pinctrl_of_match, &pdev->dev)->data; + at91_pinctrl_child_count(info, np); + + if (gpio_banks < 1) { + dev_err(&pdev->dev, "you need to specify at least one gpio-controller\n"); + return -EINVAL; + } + + ret = at91_pinctrl_mux_mask(info, np); + if (ret) + return ret; + + dev_dbg(&pdev->dev, "nmux = %d\n", info->nmux); + + dev_dbg(&pdev->dev, "mux-mask\n"); + tmp = info->mux_mask; + for (i = 0; i < gpio_banks; i++) { + for (j = 0; j < info->nmux; j++, tmp++) { + dev_dbg(&pdev->dev, "%d:%d\t0x%x\n", i, j, tmp[0]); + } + } + + dev_dbg(&pdev->dev, "nfunctions = %d\n", info->nfunctions); + dev_dbg(&pdev->dev, "ngroups = %d\n", info->ngroups); + info->functions = devm_kcalloc(&pdev->dev, + info->nfunctions, + sizeof(struct at91_pmx_func), + GFP_KERNEL); + if (!info->functions) + return -ENOMEM; + + info->groups = devm_kcalloc(&pdev->dev, + info->ngroups, + sizeof(struct at91_pin_group), + GFP_KERNEL); + if (!info->groups) + return -ENOMEM; + + dev_dbg(&pdev->dev, "nbanks = %d\n", gpio_banks); + dev_dbg(&pdev->dev, "nfunctions = %d\n", info->nfunctions); + dev_dbg(&pdev->dev, "ngroups = %d\n", info->ngroups); + + i = 0; + + for_each_child_of_node(np, child) { + if (of_device_is_compatible(child, gpio_compat)) + continue; + ret = at91_pinctrl_parse_functions(child, info, i++); + if (ret) { + dev_err(&pdev->dev, "failed to parse function\n"); + of_node_put(child); + return ret; + } + } + + return 0; +} + +static int at91_pinctrl_probe(struct platform_device *pdev) +{ + struct at91_pinctrl *info; + struct pinctrl_pin_desc *pdesc; + int ret, i, j, k, ngpio_chips_enabled = 0; + + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + ret = at91_pinctrl_probe_dt(pdev, info); + if (ret) + return ret; + + /* + * We need all the GPIO drivers to probe FIRST, or we will not be able + * to obtain references to the struct gpio_chip * for them, and we + * need this to proceed. + */ + for (i = 0; i < gpio_banks; i++) + if (gpio_chips[i]) + ngpio_chips_enabled++; + + if (ngpio_chips_enabled < info->nactive_banks) { + dev_warn(&pdev->dev, + "All GPIO chips are not registered yet (%d/%d)\n", + ngpio_chips_enabled, info->nactive_banks); + devm_kfree(&pdev->dev, info); + return -EPROBE_DEFER; + } + + at91_pinctrl_desc.name = dev_name(&pdev->dev); + at91_pinctrl_desc.npins = gpio_banks * MAX_NB_GPIO_PER_BANK; + at91_pinctrl_desc.pins = pdesc = + devm_kcalloc(&pdev->dev, + at91_pinctrl_desc.npins, sizeof(*pdesc), + GFP_KERNEL); + + if (!at91_pinctrl_desc.pins) + return -ENOMEM; + + for (i = 0, k = 0; i < gpio_banks; i++) { + for (j = 0; j < MAX_NB_GPIO_PER_BANK; j++, k++) { + pdesc->number = k; + pdesc->name = kasprintf(GFP_KERNEL, "pio%c%d", i + 'A', j); + pdesc++; + } + } + + platform_set_drvdata(pdev, info); + info->pctl = devm_pinctrl_register(&pdev->dev, &at91_pinctrl_desc, + info); + + if (IS_ERR(info->pctl)) { + dev_err(&pdev->dev, "could not register AT91 pinctrl driver\n"); + return PTR_ERR(info->pctl); + } + + /* We will handle a range of GPIO pins */ + for (i = 0; i < gpio_banks; i++) + if (gpio_chips[i]) + pinctrl_add_gpio_range(info->pctl, &gpio_chips[i]->range); + + dev_info(&pdev->dev, "initialized AT91 pinctrl driver\n"); + + return 0; +} + +static int at91_gpio_get_direction(struct gpio_chip *chip, unsigned offset) +{ + struct at91_gpio_chip *at91_gpio = gpiochip_get_data(chip); + void __iomem *pio = at91_gpio->regbase; + unsigned mask = 1 << offset; + u32 osr; + + osr = readl_relaxed(pio + PIO_OSR); + if (osr & mask) + return GPIO_LINE_DIRECTION_OUT; + + return GPIO_LINE_DIRECTION_IN; +} + +static int at91_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + struct at91_gpio_chip *at91_gpio = gpiochip_get_data(chip); + void __iomem *pio = at91_gpio->regbase; + unsigned mask = 1 << offset; + + writel_relaxed(mask, pio + PIO_ODR); + return 0; +} + +static int at91_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct at91_gpio_chip *at91_gpio = gpiochip_get_data(chip); + void __iomem *pio = at91_gpio->regbase; + unsigned mask = 1 << offset; + u32 pdsr; + + pdsr = readl_relaxed(pio + PIO_PDSR); + return (pdsr & mask) != 0; +} + +static void at91_gpio_set(struct gpio_chip *chip, unsigned offset, + int val) +{ + struct at91_gpio_chip *at91_gpio = gpiochip_get_data(chip); + void __iomem *pio = at91_gpio->regbase; + unsigned mask = 1 << offset; + + writel_relaxed(mask, pio + (val ? PIO_SODR : PIO_CODR)); +} + +static void at91_gpio_set_multiple(struct gpio_chip *chip, + unsigned long *mask, unsigned long *bits) +{ + struct at91_gpio_chip *at91_gpio = gpiochip_get_data(chip); + void __iomem *pio = at91_gpio->regbase; + +#define BITS_MASK(bits) (((bits) == 32) ? ~0U : (BIT(bits) - 1)) + /* Mask additionally to ngpio as not all GPIO controllers have 32 pins */ + uint32_t set_mask = (*mask & *bits) & BITS_MASK(chip->ngpio); + uint32_t clear_mask = (*mask & ~(*bits)) & BITS_MASK(chip->ngpio); + + writel_relaxed(set_mask, pio + PIO_SODR); + writel_relaxed(clear_mask, pio + PIO_CODR); +} + +static int at91_gpio_direction_output(struct gpio_chip *chip, unsigned offset, + int val) +{ + struct at91_gpio_chip *at91_gpio = gpiochip_get_data(chip); + void __iomem *pio = at91_gpio->regbase; + unsigned mask = 1 << offset; + + writel_relaxed(mask, pio + (val ? PIO_SODR : PIO_CODR)); + writel_relaxed(mask, pio + PIO_OER); + + return 0; +} + +#ifdef CONFIG_DEBUG_FS +static void at91_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) +{ + enum at91_mux mode; + int i; + struct at91_gpio_chip *at91_gpio = gpiochip_get_data(chip); + void __iomem *pio = at91_gpio->regbase; + const char *gpio_label; + + for_each_requested_gpio(chip, i, gpio_label) { + unsigned mask = pin_to_mask(i); + + mode = at91_gpio->ops->get_periph(pio, mask); + seq_printf(s, "[%s] GPIO%s%d: ", + gpio_label, chip->label, i); + if (mode == AT91_MUX_GPIO) { + seq_printf(s, "[gpio] "); + seq_printf(s, "%s ", + readl_relaxed(pio + PIO_OSR) & mask ? + "output" : "input"); + seq_printf(s, "%s\n", + readl_relaxed(pio + PIO_PDSR) & mask ? + "set" : "clear"); + } else { + seq_printf(s, "[periph %c]\n", + mode + 'A' - 1); + } + } +} +#else +#define at91_gpio_dbg_show NULL +#endif + +/* Several AIC controller irqs are dispatched through this GPIO handler. + * To use any AT91_PIN_* as an externally triggered IRQ, first call + * at91_set_gpio_input() then maybe enable its glitch filter. + * Then just request_irq() with the pin ID; it works like any ARM IRQ + * handler. + * First implementation always triggers on rising and falling edges + * whereas the newer PIO3 can be additionally configured to trigger on + * level, edge with any polarity. + * + * Alternatively, certain pins may be used directly as IRQ0..IRQ6 after + * configuring them with at91_set_a_periph() or at91_set_b_periph(). + * IRQ0..IRQ6 should be configurable, e.g. level vs edge triggering. + */ + +static void gpio_irq_mask(struct irq_data *d) +{ + struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d); + void __iomem *pio = at91_gpio->regbase; + unsigned mask = 1 << d->hwirq; + + if (pio) + writel_relaxed(mask, pio + PIO_IDR); +} + +static void gpio_irq_unmask(struct irq_data *d) +{ + struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d); + void __iomem *pio = at91_gpio->regbase; + unsigned mask = 1 << d->hwirq; + + if (pio) + writel_relaxed(mask, pio + PIO_IER); +} + +static int gpio_irq_type(struct irq_data *d, unsigned type) +{ + switch (type) { + case IRQ_TYPE_NONE: + case IRQ_TYPE_EDGE_BOTH: + return 0; + default: + return -EINVAL; + } +} + +/* Alternate irq type for PIO3 support */ +static int alt_gpio_irq_type(struct irq_data *d, unsigned type) +{ + struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d); + void __iomem *pio = at91_gpio->regbase; + unsigned mask = 1 << d->hwirq; + + switch (type) { + case IRQ_TYPE_EDGE_RISING: + irq_set_handler_locked(d, handle_simple_irq); + writel_relaxed(mask, pio + PIO_ESR); + writel_relaxed(mask, pio + PIO_REHLSR); + break; + case IRQ_TYPE_EDGE_FALLING: + irq_set_handler_locked(d, handle_simple_irq); + writel_relaxed(mask, pio + PIO_ESR); + writel_relaxed(mask, pio + PIO_FELLSR); + break; + case IRQ_TYPE_LEVEL_LOW: + irq_set_handler_locked(d, handle_level_irq); + writel_relaxed(mask, pio + PIO_LSR); + writel_relaxed(mask, pio + PIO_FELLSR); + break; + case IRQ_TYPE_LEVEL_HIGH: + irq_set_handler_locked(d, handle_level_irq); + writel_relaxed(mask, pio + PIO_LSR); + writel_relaxed(mask, pio + PIO_REHLSR); + break; + case IRQ_TYPE_EDGE_BOTH: + /* + * disable additional interrupt modes: + * fall back to default behavior + */ + irq_set_handler_locked(d, handle_simple_irq); + writel_relaxed(mask, pio + PIO_AIMDR); + return 0; + case IRQ_TYPE_NONE: + default: + pr_warn("AT91: No type for GPIO irq offset %d\n", d->irq); + return -EINVAL; + } + + /* enable additional interrupt modes */ + writel_relaxed(mask, pio + PIO_AIMER); + + return 0; +} + +static void gpio_irq_ack(struct irq_data *d) +{ + /* the interrupt is already cleared before by reading ISR */ +} + +#ifdef CONFIG_PM + +static u32 wakeups[MAX_GPIO_BANKS]; +static u32 backups[MAX_GPIO_BANKS]; + +static int gpio_irq_set_wake(struct irq_data *d, unsigned state) +{ + struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d); + unsigned bank = at91_gpio->pioc_idx; + unsigned mask = 1 << d->hwirq; + + if (unlikely(bank >= MAX_GPIO_BANKS)) + return -EINVAL; + + if (state) + wakeups[bank] |= mask; + else + wakeups[bank] &= ~mask; + + irq_set_irq_wake(at91_gpio->pioc_virq, state); + + return 0; +} + +void at91_pinctrl_gpio_suspend(void) +{ + int i; + + for (i = 0; i < gpio_banks; i++) { + void __iomem *pio; + + if (!gpio_chips[i]) + continue; + + pio = gpio_chips[i]->regbase; + + backups[i] = readl_relaxed(pio + PIO_IMR); + writel_relaxed(backups[i], pio + PIO_IDR); + writel_relaxed(wakeups[i], pio + PIO_IER); + + if (!wakeups[i]) + clk_disable_unprepare(gpio_chips[i]->clock); + else + printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", + 'A'+i, wakeups[i]); + } +} + +void at91_pinctrl_gpio_resume(void) +{ + int i; + + for (i = 0; i < gpio_banks; i++) { + void __iomem *pio; + + if (!gpio_chips[i]) + continue; + + pio = gpio_chips[i]->regbase; + + if (!wakeups[i]) + clk_prepare_enable(gpio_chips[i]->clock); + + writel_relaxed(wakeups[i], pio + PIO_IDR); + writel_relaxed(backups[i], pio + PIO_IER); + } +} + +#else +#define gpio_irq_set_wake NULL +#endif /* CONFIG_PM */ + +static void gpio_irq_handler(struct irq_desc *desc) +{ + struct irq_chip *chip = irq_desc_get_chip(desc); + struct gpio_chip *gpio_chip = irq_desc_get_handler_data(desc); + struct at91_gpio_chip *at91_gpio = gpiochip_get_data(gpio_chip); + void __iomem *pio = at91_gpio->regbase; + unsigned long isr; + int n; + + chained_irq_enter(chip, desc); + for (;;) { + /* Reading ISR acks pending (edge triggered) GPIO interrupts. + * When there are none pending, we're finished unless we need + * to process multiple banks (like ID_PIOCDE on sam9263). + */ + isr = readl_relaxed(pio + PIO_ISR) & readl_relaxed(pio + PIO_IMR); + if (!isr) { + if (!at91_gpio->next) + break; + at91_gpio = at91_gpio->next; + pio = at91_gpio->regbase; + gpio_chip = &at91_gpio->chip; + continue; + } + + for_each_set_bit(n, &isr, BITS_PER_LONG) { + generic_handle_irq(irq_find_mapping( + gpio_chip->irq.domain, n)); + } + } + chained_irq_exit(chip, desc); + /* now it may re-trigger */ +} + +static int at91_gpio_of_irq_setup(struct platform_device *pdev, + struct at91_gpio_chip *at91_gpio) +{ + struct gpio_chip *gpiochip_prev = NULL; + struct at91_gpio_chip *prev = NULL; + struct irq_data *d = irq_get_irq_data(at91_gpio->pioc_virq); + struct irq_chip *gpio_irqchip; + struct gpio_irq_chip *girq; + int i; + + gpio_irqchip = devm_kzalloc(&pdev->dev, sizeof(*gpio_irqchip), + GFP_KERNEL); + if (!gpio_irqchip) + return -ENOMEM; + + at91_gpio->pioc_hwirq = irqd_to_hwirq(d); + + gpio_irqchip->name = "GPIO"; + gpio_irqchip->irq_ack = gpio_irq_ack; + gpio_irqchip->irq_disable = gpio_irq_mask; + gpio_irqchip->irq_mask = gpio_irq_mask; + gpio_irqchip->irq_unmask = gpio_irq_unmask; + gpio_irqchip->irq_set_wake = gpio_irq_set_wake, + gpio_irqchip->irq_set_type = at91_gpio->ops->irq_type; + + /* Disable irqs of this PIO controller */ + writel_relaxed(~0, at91_gpio->regbase + PIO_IDR); + + /* + * Let the generic code handle this edge IRQ, the the chained + * handler will perform the actual work of handling the parent + * interrupt. + */ + girq = &at91_gpio->chip.irq; + girq->chip = gpio_irqchip; + girq->default_type = IRQ_TYPE_NONE; + girq->handler = handle_edge_irq; + + /* + * The top level handler handles one bank of GPIOs, except + * on some SoC it can handle up to three... + * We only set up the handler for the first of the list. + */ + gpiochip_prev = irq_get_handler_data(at91_gpio->pioc_virq); + if (!gpiochip_prev) { + girq->parent_handler = gpio_irq_handler; + girq->num_parents = 1; + girq->parents = devm_kcalloc(&pdev->dev, 1, + sizeof(*girq->parents), + GFP_KERNEL); + if (!girq->parents) + return -ENOMEM; + girq->parents[0] = at91_gpio->pioc_virq; + return 0; + } + + prev = gpiochip_get_data(gpiochip_prev); + /* we can only have 2 banks before */ + for (i = 0; i < 2; i++) { + if (prev->next) { + prev = prev->next; + } else { + prev->next = at91_gpio; + return 0; + } + } + + return -EINVAL; +} + +/* This structure is replicated for each GPIO block allocated at probe time */ +static const struct gpio_chip at91_gpio_template = { + .request = gpiochip_generic_request, + .free = gpiochip_generic_free, + .get_direction = at91_gpio_get_direction, + .direction_input = at91_gpio_direction_input, + .get = at91_gpio_get, + .direction_output = at91_gpio_direction_output, + .set = at91_gpio_set, + .set_multiple = at91_gpio_set_multiple, + .dbg_show = at91_gpio_dbg_show, + .can_sleep = false, + .ngpio = MAX_NB_GPIO_PER_BANK, +}; + +static const struct of_device_id at91_gpio_of_match[] = { + { .compatible = "atmel,at91sam9x5-gpio", .data = &at91sam9x5_ops, }, + { .compatible = "atmel,at91rm9200-gpio", .data = &at91rm9200_ops }, + { .compatible = "microchip,sam9x60-gpio", .data = &sam9x60_ops }, + { /* sentinel */ } +}; + +static int at91_gpio_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct at91_gpio_chip *at91_chip = NULL; + struct gpio_chip *chip; + struct pinctrl_gpio_range *range; + int ret = 0; + int irq, i; + int alias_idx = of_alias_get_id(np, "gpio"); + uint32_t ngpio; + char **names; + + BUG_ON(alias_idx >= ARRAY_SIZE(gpio_chips)); + if (gpio_chips[alias_idx]) { + ret = -EBUSY; + goto err; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + ret = irq; + goto err; + } + + at91_chip = devm_kzalloc(&pdev->dev, sizeof(*at91_chip), GFP_KERNEL); + if (!at91_chip) { + ret = -ENOMEM; + goto err; + } + + at91_chip->regbase = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(at91_chip->regbase)) { + ret = PTR_ERR(at91_chip->regbase); + goto err; + } + + at91_chip->ops = (struct at91_pinctrl_mux_ops *) + of_match_device(at91_gpio_of_match, &pdev->dev)->data; + at91_chip->pioc_virq = irq; + at91_chip->pioc_idx = alias_idx; + + at91_chip->clock = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(at91_chip->clock)) { + dev_err(&pdev->dev, "failed to get clock, ignoring.\n"); + ret = PTR_ERR(at91_chip->clock); + goto err; + } + + ret = clk_prepare_enable(at91_chip->clock); + if (ret) { + dev_err(&pdev->dev, "failed to prepare and enable clock, ignoring.\n"); + goto clk_enable_err; + } + + at91_chip->chip = at91_gpio_template; + + chip = &at91_chip->chip; + chip->of_node = np; + chip->label = dev_name(&pdev->dev); + chip->parent = &pdev->dev; + chip->owner = THIS_MODULE; + chip->base = alias_idx * MAX_NB_GPIO_PER_BANK; + + if (!of_property_read_u32(np, "#gpio-lines", &ngpio)) { + if (ngpio >= MAX_NB_GPIO_PER_BANK) + pr_err("at91_gpio.%d, gpio-nb >= %d failback to %d\n", + alias_idx, MAX_NB_GPIO_PER_BANK, MAX_NB_GPIO_PER_BANK); + else + chip->ngpio = ngpio; + } + + names = devm_kcalloc(&pdev->dev, chip->ngpio, sizeof(char *), + GFP_KERNEL); + + if (!names) { + ret = -ENOMEM; + goto clk_enable_err; + } + + for (i = 0; i < chip->ngpio; i++) + names[i] = devm_kasprintf(&pdev->dev, GFP_KERNEL, "pio%c%d", alias_idx + 'A', i); + + chip->names = (const char *const *)names; + + range = &at91_chip->range; + range->name = chip->label; + range->id = alias_idx; + range->pin_base = range->base = range->id * MAX_NB_GPIO_PER_BANK; + + range->npins = chip->ngpio; + range->gc = chip; + + ret = at91_gpio_of_irq_setup(pdev, at91_chip); + if (ret) + goto gpiochip_add_err; + + ret = gpiochip_add_data(chip, at91_chip); + if (ret) + goto gpiochip_add_err; + + gpio_chips[alias_idx] = at91_chip; + gpio_banks = max(gpio_banks, alias_idx + 1); + + dev_info(&pdev->dev, "at address %p\n", at91_chip->regbase); + + return 0; + +gpiochip_add_err: +clk_enable_err: + clk_disable_unprepare(at91_chip->clock); +err: + dev_err(&pdev->dev, "Failure %i for GPIO %i\n", ret, alias_idx); + + return ret; +} + +static struct platform_driver at91_gpio_driver = { + .driver = { + .name = "gpio-at91", + .of_match_table = at91_gpio_of_match, + }, + .probe = at91_gpio_probe, +}; + +static struct platform_driver at91_pinctrl_driver = { + .driver = { + .name = "pinctrl-at91", + .of_match_table = at91_pinctrl_of_match, + }, + .probe = at91_pinctrl_probe, +}; + +static struct platform_driver * const drivers[] = { + &at91_gpio_driver, + &at91_pinctrl_driver, +}; + +static int __init at91_pinctrl_init(void) +{ + return platform_register_drivers(drivers, ARRAY_SIZE(drivers)); +} +arch_initcall(at91_pinctrl_init); |