diff options
Diffstat (limited to 'drivers/slimbus')
| -rw-r--r-- | drivers/slimbus/Kconfig | 35 | ||||
| -rw-r--r-- | drivers/slimbus/Makefile | 13 | ||||
| -rw-r--r-- | drivers/slimbus/core.c | 552 | ||||
| -rw-r--r-- | drivers/slimbus/messaging.c | 364 | ||||
| -rw-r--r-- | drivers/slimbus/qcom-ctrl.c | 739 | ||||
| -rw-r--r-- | drivers/slimbus/qcom-ngd-ctrl.c | 1554 | ||||
| -rw-r--r-- | drivers/slimbus/sched.c | 121 | ||||
| -rw-r--r-- | drivers/slimbus/slimbus.h | 453 | ||||
| -rw-r--r-- | drivers/slimbus/stream.c | 477 |
9 files changed, 4308 insertions, 0 deletions
diff --git a/drivers/slimbus/Kconfig b/drivers/slimbus/Kconfig new file mode 100644 index 000000000..8cd595148 --- /dev/null +++ b/drivers/slimbus/Kconfig @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# SLIMbus driver configuration +# +menuconfig SLIMBUS + tristate "SLIMbus support" + help + SLIMbus is standard interface between System-on-Chip and audio codec, + and other peripheral components in typical embedded systems. + + If unsure, choose N. + +if SLIMBUS + +# SLIMbus controllers +config SLIM_QCOM_CTRL + tristate "Qualcomm SLIMbus Manager Component" + depends on HAS_IOMEM + help + Select driver if Qualcomm's SLIMbus Manager Component is + programmed using Linux kernel. + +config SLIM_QCOM_NGD_CTRL + tristate "Qualcomm SLIMbus Satellite Non-Generic Device Component" + depends on HAS_IOMEM && DMA_ENGINE && NET + depends on ARCH_QCOM || COMPILE_TEST + select QCOM_QMI_HELPERS + help + Select driver if Qualcomm's SLIMbus Satellite Non-Generic Device + Component is programmed using Linux kernel. + This is light-weight slimbus controller driver responsible for + communicating with slave HW directly over the bus using messaging + interface, and communicating with master component residing on ADSP + for bandwidth and data-channel management. +endif diff --git a/drivers/slimbus/Makefile b/drivers/slimbus/Makefile new file mode 100644 index 000000000..d9aa011b6 --- /dev/null +++ b/drivers/slimbus/Makefile @@ -0,0 +1,13 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for kernel SLIMbus framework. +# +obj-$(CONFIG_SLIMBUS) += slimbus.o +slimbus-y := core.o messaging.o sched.o stream.o + +#Controllers +obj-$(CONFIG_SLIM_QCOM_CTRL) += slim-qcom-ctrl.o +slim-qcom-ctrl-y := qcom-ctrl.o + +obj-$(CONFIG_SLIM_QCOM_NGD_CTRL) += slim-qcom-ngd-ctrl.o +slim-qcom-ngd-ctrl-y := qcom-ngd-ctrl.o diff --git a/drivers/slimbus/core.c b/drivers/slimbus/core.c new file mode 100644 index 000000000..1d2bc181d --- /dev/null +++ b/drivers/slimbus/core.c @@ -0,0 +1,552 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2011-2017, The Linux Foundation + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/idr.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/pm_runtime.h> +#include <linux/slimbus.h> +#include "slimbus.h" + +static DEFINE_IDA(ctrl_ida); + +static const struct slim_device_id *slim_match(const struct slim_device_id *id, + const struct slim_device *sbdev) +{ + while (id->manf_id != 0 || id->prod_code != 0) { + if (id->manf_id == sbdev->e_addr.manf_id && + id->prod_code == sbdev->e_addr.prod_code && + id->dev_index == sbdev->e_addr.dev_index && + id->instance == sbdev->e_addr.instance) + return id; + id++; + } + return NULL; +} + +static int slim_device_match(struct device *dev, struct device_driver *drv) +{ + struct slim_device *sbdev = to_slim_device(dev); + struct slim_driver *sbdrv = to_slim_driver(drv); + + /* Attempt an OF style match first */ + if (of_driver_match_device(dev, drv)) + return 1; + + return !!slim_match(sbdrv->id_table, sbdev); +} + +static void slim_device_update_status(struct slim_device *sbdev, + enum slim_device_status status) +{ + struct slim_driver *sbdrv; + + if (sbdev->status == status) + return; + + sbdev->status = status; + if (!sbdev->dev.driver) + return; + + sbdrv = to_slim_driver(sbdev->dev.driver); + if (sbdrv->device_status) + sbdrv->device_status(sbdev, sbdev->status); +} + +static int slim_device_probe(struct device *dev) +{ + struct slim_device *sbdev = to_slim_device(dev); + struct slim_driver *sbdrv = to_slim_driver(dev->driver); + int ret; + + ret = sbdrv->probe(sbdev); + if (ret) + return ret; + + /* try getting the logical address after probe */ + ret = slim_get_logical_addr(sbdev); + if (!ret) { + slim_device_update_status(sbdev, SLIM_DEVICE_STATUS_UP); + } else { + dev_err(&sbdev->dev, "Failed to get logical address\n"); + ret = -EPROBE_DEFER; + } + + return ret; +} + +static int slim_device_remove(struct device *dev) +{ + struct slim_device *sbdev = to_slim_device(dev); + struct slim_driver *sbdrv; + + if (dev->driver) { + sbdrv = to_slim_driver(dev->driver); + if (sbdrv->remove) + sbdrv->remove(sbdev); + } + + return 0; +} + +static int slim_device_uevent(struct device *dev, struct kobj_uevent_env *env) +{ + struct slim_device *sbdev = to_slim_device(dev); + + return add_uevent_var(env, "MODALIAS=slim:%s", dev_name(&sbdev->dev)); +} + +struct bus_type slimbus_bus = { + .name = "slimbus", + .match = slim_device_match, + .probe = slim_device_probe, + .remove = slim_device_remove, + .uevent = slim_device_uevent, +}; +EXPORT_SYMBOL_GPL(slimbus_bus); + +/* + * __slim_driver_register() - Client driver registration with SLIMbus + * + * @drv:Client driver to be associated with client-device. + * @owner: owning module/driver + * + * This API will register the client driver with the SLIMbus + * It is called from the driver's module-init function. + */ +int __slim_driver_register(struct slim_driver *drv, struct module *owner) +{ + /* ID table and probe are mandatory */ + if (!(drv->driver.of_match_table || drv->id_table) || !drv->probe) + return -EINVAL; + + drv->driver.bus = &slimbus_bus; + drv->driver.owner = owner; + + return driver_register(&drv->driver); +} +EXPORT_SYMBOL_GPL(__slim_driver_register); + +/* + * slim_driver_unregister() - Undo effect of slim_driver_register + * + * @drv: Client driver to be unregistered + */ +void slim_driver_unregister(struct slim_driver *drv) +{ + driver_unregister(&drv->driver); +} +EXPORT_SYMBOL_GPL(slim_driver_unregister); + +static void slim_dev_release(struct device *dev) +{ + struct slim_device *sbdev = to_slim_device(dev); + + kfree(sbdev); +} + +static int slim_add_device(struct slim_controller *ctrl, + struct slim_device *sbdev, + struct device_node *node) +{ + sbdev->dev.bus = &slimbus_bus; + sbdev->dev.parent = ctrl->dev; + sbdev->dev.release = slim_dev_release; + sbdev->dev.driver = NULL; + sbdev->ctrl = ctrl; + INIT_LIST_HEAD(&sbdev->stream_list); + spin_lock_init(&sbdev->stream_list_lock); + sbdev->dev.of_node = of_node_get(node); + sbdev->dev.fwnode = of_fwnode_handle(node); + + dev_set_name(&sbdev->dev, "%x:%x:%x:%x", + sbdev->e_addr.manf_id, + sbdev->e_addr.prod_code, + sbdev->e_addr.dev_index, + sbdev->e_addr.instance); + + return device_register(&sbdev->dev); +} + +static struct slim_device *slim_alloc_device(struct slim_controller *ctrl, + struct slim_eaddr *eaddr, + struct device_node *node) +{ + struct slim_device *sbdev; + int ret; + + sbdev = kzalloc(sizeof(*sbdev), GFP_KERNEL); + if (!sbdev) + return NULL; + + sbdev->e_addr = *eaddr; + ret = slim_add_device(ctrl, sbdev, node); + if (ret) { + put_device(&sbdev->dev); + return NULL; + } + + return sbdev; +} + +static void of_register_slim_devices(struct slim_controller *ctrl) +{ + struct device *dev = ctrl->dev; + struct device_node *node; + + if (!ctrl->dev->of_node) + return; + + for_each_child_of_node(ctrl->dev->of_node, node) { + struct slim_device *sbdev; + struct slim_eaddr e_addr; + const char *compat = NULL; + int reg[2], ret; + int manf_id, prod_code; + + compat = of_get_property(node, "compatible", NULL); + if (!compat) + continue; + + ret = sscanf(compat, "slim%x,%x", &manf_id, &prod_code); + if (ret != 2) { + dev_err(dev, "Manf ID & Product code not found %s\n", + compat); + continue; + } + + ret = of_property_read_u32_array(node, "reg", reg, 2); + if (ret) { + dev_err(dev, "Device and Instance id not found:%d\n", + ret); + continue; + } + + e_addr.dev_index = reg[0]; + e_addr.instance = reg[1]; + e_addr.manf_id = manf_id; + e_addr.prod_code = prod_code; + + sbdev = slim_alloc_device(ctrl, &e_addr, node); + if (!sbdev) + continue; + } +} + +/* + * slim_register_controller() - Controller bring-up and registration. + * + * @ctrl: Controller to be registered. + * + * A controller is registered with the framework using this API. + * If devices on a controller were registered before controller, + * this will make sure that they get probed when controller is up + */ +int slim_register_controller(struct slim_controller *ctrl) +{ + int id; + + id = ida_simple_get(&ctrl_ida, 0, 0, GFP_KERNEL); + if (id < 0) + return id; + + ctrl->id = id; + + if (!ctrl->min_cg) + ctrl->min_cg = SLIM_MIN_CLK_GEAR; + if (!ctrl->max_cg) + ctrl->max_cg = SLIM_MAX_CLK_GEAR; + + ida_init(&ctrl->laddr_ida); + idr_init(&ctrl->tid_idr); + mutex_init(&ctrl->lock); + mutex_init(&ctrl->sched.m_reconf); + init_completion(&ctrl->sched.pause_comp); + spin_lock_init(&ctrl->txn_lock); + + dev_dbg(ctrl->dev, "Bus [%s] registered:dev:%p\n", + ctrl->name, ctrl->dev); + + of_register_slim_devices(ctrl); + + return 0; +} +EXPORT_SYMBOL_GPL(slim_register_controller); + +/* slim_remove_device: Remove the effect of slim_add_device() */ +static void slim_remove_device(struct slim_device *sbdev) +{ + of_node_put(sbdev->dev.of_node); + device_unregister(&sbdev->dev); +} + +static int slim_ctrl_remove_device(struct device *dev, void *null) +{ + slim_remove_device(to_slim_device(dev)); + return 0; +} + +/** + * slim_unregister_controller() - Controller tear-down. + * + * @ctrl: Controller to tear-down. + */ +int slim_unregister_controller(struct slim_controller *ctrl) +{ + /* Remove all clients */ + device_for_each_child(ctrl->dev, NULL, slim_ctrl_remove_device); + ida_simple_remove(&ctrl_ida, ctrl->id); + + return 0; +} +EXPORT_SYMBOL_GPL(slim_unregister_controller); + +/** + * slim_report_absent() - Controller calls this function when a device + * reports absent, OR when the device cannot be communicated with + * + * @sbdev: Device that cannot be reached, or sent report absent + */ +void slim_report_absent(struct slim_device *sbdev) +{ + struct slim_controller *ctrl = sbdev->ctrl; + + if (!ctrl) + return; + + /* invalidate logical addresses */ + mutex_lock(&ctrl->lock); + sbdev->is_laddr_valid = false; + mutex_unlock(&ctrl->lock); + if (!ctrl->get_laddr) + ida_simple_remove(&ctrl->laddr_ida, sbdev->laddr); + slim_device_update_status(sbdev, SLIM_DEVICE_STATUS_DOWN); +} +EXPORT_SYMBOL_GPL(slim_report_absent); + +static bool slim_eaddr_equal(struct slim_eaddr *a, struct slim_eaddr *b) +{ + return (a->manf_id == b->manf_id && + a->prod_code == b->prod_code && + a->dev_index == b->dev_index && + a->instance == b->instance); +} + +static int slim_match_dev(struct device *dev, void *data) +{ + struct slim_eaddr *e_addr = data; + struct slim_device *sbdev = to_slim_device(dev); + + return slim_eaddr_equal(&sbdev->e_addr, e_addr); +} + +static struct slim_device *find_slim_device(struct slim_controller *ctrl, + struct slim_eaddr *eaddr) +{ + struct slim_device *sbdev; + struct device *dev; + + dev = device_find_child(ctrl->dev, eaddr, slim_match_dev); + if (dev) { + sbdev = to_slim_device(dev); + return sbdev; + } + + return NULL; +} + +/** + * slim_get_device() - get handle to a device. + * + * @ctrl: Controller on which this device will be added/queried + * @e_addr: Enumeration address of the device to be queried + * + * Return: pointer to a device if it has already reported. Creates a new + * device and returns pointer to it if the device has not yet enumerated. + */ +struct slim_device *slim_get_device(struct slim_controller *ctrl, + struct slim_eaddr *e_addr) +{ + struct slim_device *sbdev; + + sbdev = find_slim_device(ctrl, e_addr); + if (!sbdev) { + sbdev = slim_alloc_device(ctrl, e_addr, NULL); + if (!sbdev) + return ERR_PTR(-ENOMEM); + } + + return sbdev; +} +EXPORT_SYMBOL_GPL(slim_get_device); + +static int of_slim_match_dev(struct device *dev, void *data) +{ + struct device_node *np = data; + struct slim_device *sbdev = to_slim_device(dev); + + return (sbdev->dev.of_node == np); +} + +static struct slim_device *of_find_slim_device(struct slim_controller *ctrl, + struct device_node *np) +{ + struct slim_device *sbdev; + struct device *dev; + + dev = device_find_child(ctrl->dev, np, of_slim_match_dev); + if (dev) { + sbdev = to_slim_device(dev); + return sbdev; + } + + return NULL; +} + +/** + * of_slim_get_device() - get handle to a device using dt node. + * + * @ctrl: Controller on which this device will be added/queried + * @np: node pointer to device + * + * Return: pointer to a device if it has already reported. Creates a new + * device and returns pointer to it if the device has not yet enumerated. + */ +struct slim_device *of_slim_get_device(struct slim_controller *ctrl, + struct device_node *np) +{ + return of_find_slim_device(ctrl, np); +} +EXPORT_SYMBOL_GPL(of_slim_get_device); + +static int slim_device_alloc_laddr(struct slim_device *sbdev, + bool report_present) +{ + struct slim_controller *ctrl = sbdev->ctrl; + u8 laddr; + int ret; + + mutex_lock(&ctrl->lock); + if (ctrl->get_laddr) { + ret = ctrl->get_laddr(ctrl, &sbdev->e_addr, &laddr); + if (ret < 0) + goto err; + } else if (report_present) { + ret = ida_simple_get(&ctrl->laddr_ida, + 0, SLIM_LA_MANAGER - 1, GFP_KERNEL); + if (ret < 0) + goto err; + + laddr = ret; + } else { + ret = -EINVAL; + goto err; + } + + if (ctrl->set_laddr) { + ret = ctrl->set_laddr(ctrl, &sbdev->e_addr, laddr); + if (ret) { + ret = -EINVAL; + goto err; + } + } + + sbdev->laddr = laddr; + sbdev->is_laddr_valid = true; + mutex_unlock(&ctrl->lock); + + slim_device_update_status(sbdev, SLIM_DEVICE_STATUS_UP); + + dev_dbg(ctrl->dev, "setting slimbus l-addr:%x, ea:%x,%x,%x,%x\n", + laddr, sbdev->e_addr.manf_id, sbdev->e_addr.prod_code, + sbdev->e_addr.dev_index, sbdev->e_addr.instance); + + return 0; + +err: + mutex_unlock(&ctrl->lock); + return ret; + +} + +/** + * slim_device_report_present() - Report enumerated device. + * + * @ctrl: Controller with which device is enumerated. + * @e_addr: Enumeration address of the device. + * @laddr: Return logical address (if valid flag is false) + * + * Called by controller in response to REPORT_PRESENT. Framework will assign + * a logical address to this enumeration address. + * Function returns -EXFULL to indicate that all logical addresses are already + * taken. + */ +int slim_device_report_present(struct slim_controller *ctrl, + struct slim_eaddr *e_addr, u8 *laddr) +{ + struct slim_device *sbdev; + int ret; + + ret = pm_runtime_get_sync(ctrl->dev); + + if (ctrl->sched.clk_state != SLIM_CLK_ACTIVE) { + dev_err(ctrl->dev, "slim ctrl not active,state:%d, ret:%d\n", + ctrl->sched.clk_state, ret); + goto slimbus_not_active; + } + + sbdev = slim_get_device(ctrl, e_addr); + if (IS_ERR(sbdev)) + return -ENODEV; + + if (sbdev->is_laddr_valid) { + *laddr = sbdev->laddr; + return 0; + } + + ret = slim_device_alloc_laddr(sbdev, true); + +slimbus_not_active: + pm_runtime_mark_last_busy(ctrl->dev); + pm_runtime_put_autosuspend(ctrl->dev); + return ret; +} +EXPORT_SYMBOL_GPL(slim_device_report_present); + +/** + * slim_get_logical_addr() - get/allocate logical address of a SLIMbus device. + * + * @sbdev: client handle requesting the address. + * + * Return: zero if a logical address is valid or a new logical address + * has been assigned. error code in case of error. + */ +int slim_get_logical_addr(struct slim_device *sbdev) +{ + if (!sbdev->is_laddr_valid) + return slim_device_alloc_laddr(sbdev, false); + + return 0; +} +EXPORT_SYMBOL_GPL(slim_get_logical_addr); + +static void __exit slimbus_exit(void) +{ + bus_unregister(&slimbus_bus); +} +module_exit(slimbus_exit); + +static int __init slimbus_init(void) +{ + return bus_register(&slimbus_bus); +} +postcore_initcall(slimbus_init); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("SLIMbus core"); diff --git a/drivers/slimbus/messaging.c b/drivers/slimbus/messaging.c new file mode 100644 index 000000000..ddf0371ad --- /dev/null +++ b/drivers/slimbus/messaging.c @@ -0,0 +1,364 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2011-2017, The Linux Foundation + */ + +#include <linux/slab.h> +#include <linux/pm_runtime.h> +#include "slimbus.h" + +/** + * slim_msg_response() - Deliver Message response received from a device to the + * framework. + * + * @ctrl: Controller handle + * @reply: Reply received from the device + * @len: Length of the reply + * @tid: Transaction ID received with which framework can associate reply. + * + * Called by controller to inform framework about the response received. + * This helps in making the API asynchronous, and controller-driver doesn't need + * to manage 1 more table other than the one managed by framework mapping TID + * with buffers + */ +void slim_msg_response(struct slim_controller *ctrl, u8 *reply, u8 tid, u8 len) +{ + struct slim_msg_txn *txn; + struct slim_val_inf *msg; + unsigned long flags; + + spin_lock_irqsave(&ctrl->txn_lock, flags); + txn = idr_find(&ctrl->tid_idr, tid); + spin_unlock_irqrestore(&ctrl->txn_lock, flags); + + if (txn == NULL) + return; + + msg = txn->msg; + if (msg == NULL || msg->rbuf == NULL) { + dev_err(ctrl->dev, "Got response to invalid TID:%d, len:%d\n", + tid, len); + return; + } + + slim_free_txn_tid(ctrl, txn); + memcpy(msg->rbuf, reply, len); + if (txn->comp) + complete(txn->comp); + + /* Remove runtime-pm vote now that response was received for TID txn */ + pm_runtime_mark_last_busy(ctrl->dev); + pm_runtime_put_autosuspend(ctrl->dev); +} +EXPORT_SYMBOL_GPL(slim_msg_response); + +/** + * slim_alloc_txn_tid() - Allocate a tid to txn + * + * @ctrl: Controller handle + * @txn: transaction to be allocated with tid. + * + * Return: zero on success with valid txn->tid and error code on failures. + */ +int slim_alloc_txn_tid(struct slim_controller *ctrl, struct slim_msg_txn *txn) +{ + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&ctrl->txn_lock, flags); + ret = idr_alloc_cyclic(&ctrl->tid_idr, txn, 1, + SLIM_MAX_TIDS, GFP_ATOMIC); + if (ret < 0) { + spin_unlock_irqrestore(&ctrl->txn_lock, flags); + return ret; + } + txn->tid = ret; + spin_unlock_irqrestore(&ctrl->txn_lock, flags); + return 0; +} +EXPORT_SYMBOL_GPL(slim_alloc_txn_tid); + +/** + * slim_free_txn_tid() - Freee tid of txn + * + * @ctrl: Controller handle + * @txn: transaction whose tid should be freed + */ +void slim_free_txn_tid(struct slim_controller *ctrl, struct slim_msg_txn *txn) +{ + unsigned long flags; + + spin_lock_irqsave(&ctrl->txn_lock, flags); + idr_remove(&ctrl->tid_idr, txn->tid); + spin_unlock_irqrestore(&ctrl->txn_lock, flags); +} +EXPORT_SYMBOL_GPL(slim_free_txn_tid); + +/** + * slim_do_transfer() - Process a SLIMbus-messaging transaction + * + * @ctrl: Controller handle + * @txn: Transaction to be sent over SLIMbus + * + * Called by controller to transmit messaging transactions not dealing with + * Interface/Value elements. (e.g. transmittting a message to assign logical + * address to a slave device + * + * Return: -ETIMEDOUT: If transmission of this message timed out + * (e.g. due to bus lines not being clocked or driven by controller) + */ +int slim_do_transfer(struct slim_controller *ctrl, struct slim_msg_txn *txn) +{ + DECLARE_COMPLETION_ONSTACK(done); + bool need_tid = false, clk_pause_msg = false; + int ret, timeout; + + /* + * do not vote for runtime-PM if the transactions are part of clock + * pause sequence + */ + if (ctrl->sched.clk_state == SLIM_CLK_ENTERING_PAUSE && + (txn->mt == SLIM_MSG_MT_CORE && + txn->mc >= SLIM_MSG_MC_BEGIN_RECONFIGURATION && + txn->mc <= SLIM_MSG_MC_RECONFIGURE_NOW)) + clk_pause_msg = true; + + if (!clk_pause_msg) { + ret = pm_runtime_get_sync(ctrl->dev); + if (ctrl->sched.clk_state != SLIM_CLK_ACTIVE) { + dev_err(ctrl->dev, "ctrl wrong state:%d, ret:%d\n", + ctrl->sched.clk_state, ret); + goto slim_xfer_err; + } + } + /* Initialize tid to invalid value */ + txn->tid = 0; + need_tid = slim_tid_txn(txn->mt, txn->mc); + + if (need_tid) { + ret = slim_alloc_txn_tid(ctrl, txn); + if (ret) + return ret; + + if (!txn->msg->comp) + txn->comp = &done; + else + txn->comp = txn->comp; + } + + ret = ctrl->xfer_msg(ctrl, txn); + + if (!ret && need_tid && !txn->msg->comp) { + unsigned long ms = txn->rl + HZ; + + timeout = wait_for_completion_timeout(txn->comp, + msecs_to_jiffies(ms)); + if (!timeout) { + ret = -ETIMEDOUT; + slim_free_txn_tid(ctrl, txn); + } + } + + if (ret) + dev_err(ctrl->dev, "Tx:MT:0x%x, MC:0x%x, LA:0x%x failed:%d\n", + txn->mt, txn->mc, txn->la, ret); + +slim_xfer_err: + if (!clk_pause_msg && (txn->tid == 0 || ret == -ETIMEDOUT)) { + /* + * remove runtime-pm vote if this was TX only, or + * if there was error during this transaction + */ + pm_runtime_mark_last_busy(ctrl->dev); + pm_runtime_put_autosuspend(ctrl->dev); + } + return ret; +} +EXPORT_SYMBOL_GPL(slim_do_transfer); + +static int slim_val_inf_sanity(struct slim_controller *ctrl, + struct slim_val_inf *msg, u8 mc) +{ + if (!msg || msg->num_bytes > 16 || + (msg->start_offset + msg->num_bytes) > 0xC00) + goto reterr; + switch (mc) { + case SLIM_MSG_MC_REQUEST_VALUE: + case SLIM_MSG_MC_REQUEST_INFORMATION: + if (msg->rbuf != NULL) + return 0; + break; + + case SLIM_MSG_MC_CHANGE_VALUE: + case SLIM_MSG_MC_CLEAR_INFORMATION: + if (msg->wbuf != NULL) + return 0; + break; + + case SLIM_MSG_MC_REQUEST_CHANGE_VALUE: + case SLIM_MSG_MC_REQUEST_CLEAR_INFORMATION: + if (msg->rbuf != NULL && msg->wbuf != NULL) + return 0; + break; + } +reterr: + if (msg) + dev_err(ctrl->dev, "Sanity check failed:msg:offset:0x%x, mc:%d\n", + msg->start_offset, mc); + return -EINVAL; +} + +static u16 slim_slicesize(int code) +{ + static const u8 sizetocode[16] = { + 0, 1, 2, 3, 3, 4, 4, 5, 5, 5, 5, 6, 6, 6, 6, 7 + }; + + code = clamp(code, 1, (int)ARRAY_SIZE(sizetocode)); + + return sizetocode[code - 1]; +} + +/** + * slim_xfer_msg() - Transfer a value info message on slim device + * + * @sbdev: slim device to which this msg has to be transfered + * @msg: value info message pointer + * @mc: message code of the message + * + * Called by drivers which want to transfer a vlaue or info elements. + * + * Return: -ETIMEDOUT: If transmission of this message timed out + */ +int slim_xfer_msg(struct slim_device *sbdev, struct slim_val_inf *msg, + u8 mc) +{ + DEFINE_SLIM_LDEST_TXN(txn_stack, mc, 6, sbdev->laddr, msg); + struct slim_msg_txn *txn = &txn_stack; + struct slim_controller *ctrl = sbdev->ctrl; + int ret; + u16 sl; + + if (!ctrl) + return -EINVAL; + + ret = slim_val_inf_sanity(ctrl, msg, mc); + if (ret) + return ret; + + sl = slim_slicesize(msg->num_bytes); + + dev_dbg(ctrl->dev, "SB xfer msg:os:%x, len:%d, MC:%x, sl:%x\n", + msg->start_offset, msg->num_bytes, mc, sl); + + txn->ec = ((sl | (1 << 3)) | ((msg->start_offset & 0xFFF) << 4)); + + switch (mc) { + case SLIM_MSG_MC_REQUEST_CHANGE_VALUE: + case SLIM_MSG_MC_CHANGE_VALUE: + case SLIM_MSG_MC_REQUEST_CLEAR_INFORMATION: + case SLIM_MSG_MC_CLEAR_INFORMATION: + txn->rl += msg->num_bytes; + default: + break; + } + + if (slim_tid_txn(txn->mt, txn->mc)) + txn->rl++; + + return slim_do_transfer(ctrl, txn); +} +EXPORT_SYMBOL_GPL(slim_xfer_msg); + +static void slim_fill_msg(struct slim_val_inf *msg, u32 addr, + size_t count, u8 *rbuf, u8 *wbuf) +{ + msg->start_offset = addr; + msg->num_bytes = count; + msg->rbuf = rbuf; + msg->wbuf = wbuf; + msg->comp = NULL; +} + +/** + * slim_read() - Read SLIMbus value element + * + * @sdev: client handle. + * @addr: address of value element to read. + * @count: number of bytes to read. Maximum bytes allowed are 16. + * @val: will return what the value element value was + * + * Return: -EINVAL for Invalid parameters, -ETIMEDOUT If transmission of + * this message timed out (e.g. due to bus lines not being clocked + * or driven by controller) + */ +int slim_read(struct slim_device *sdev, u32 addr, size_t count, u8 *val) +{ + struct slim_val_inf msg; + + slim_fill_msg(&msg, addr, count, val, NULL); + + return slim_xfer_msg(sdev, &msg, SLIM_MSG_MC_REQUEST_VALUE); +} +EXPORT_SYMBOL_GPL(slim_read); + +/** + * slim_readb() - Read byte from SLIMbus value element + * + * @sdev: client handle. + * @addr: address in the value element to read. + * + * Return: byte value of value element. + */ +int slim_readb(struct slim_device *sdev, u32 addr) +{ + int ret; + u8 buf; + + ret = slim_read(sdev, addr, 1, &buf); + if (ret < 0) + return ret; + else + return buf; +} +EXPORT_SYMBOL_GPL(slim_readb); + +/** + * slim_write() - Write SLIMbus value element + * + * @sdev: client handle. + * @addr: address in the value element to write. + * @count: number of bytes to write. Maximum bytes allowed are 16. + * @val: value to write to value element + * + * Return: -EINVAL for Invalid parameters, -ETIMEDOUT If transmission of + * this message timed out (e.g. due to bus lines not being clocked + * or driven by controller) + */ +int slim_write(struct slim_device *sdev, u32 addr, size_t count, u8 *val) +{ + struct slim_val_inf msg; + + slim_fill_msg(&msg, addr, count, NULL, val); + + return slim_xfer_msg(sdev, &msg, SLIM_MSG_MC_CHANGE_VALUE); +} +EXPORT_SYMBOL_GPL(slim_write); + +/** + * slim_writeb() - Write byte to SLIMbus value element + * + * @sdev: client handle. + * @addr: address of value element to write. + * @value: value to write to value element + * + * Return: -EINVAL for Invalid parameters, -ETIMEDOUT If transmission of + * this message timed out (e.g. due to bus lines not being clocked + * or driven by controller) + * + */ +int slim_writeb(struct slim_device *sdev, u32 addr, u8 value) +{ + return slim_write(sdev, addr, 1, &value); +} +EXPORT_SYMBOL_GPL(slim_writeb); diff --git a/drivers/slimbus/qcom-ctrl.c b/drivers/slimbus/qcom-ctrl.c new file mode 100644 index 000000000..ec58091fc --- /dev/null +++ b/drivers/slimbus/qcom-ctrl.c @@ -0,0 +1,739 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2011-2017, The Linux Foundation + */ + +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/of.h> +#include <linux/pm_runtime.h> +#include "slimbus.h" + +/* Manager registers */ +#define MGR_CFG 0x200 +#define MGR_STATUS 0x204 +#define MGR_INT_EN 0x210 +#define MGR_INT_STAT 0x214 +#define MGR_INT_CLR 0x218 +#define MGR_TX_MSG 0x230 +#define MGR_RX_MSG 0x270 +#define MGR_IE_STAT 0x2F0 +#define MGR_VE_STAT 0x300 +#define MGR_CFG_ENABLE 1 + +/* Framer registers */ +#define FRM_CFG 0x400 +#define FRM_STAT 0x404 +#define FRM_INT_EN 0x410 +#define FRM_INT_STAT 0x414 +#define FRM_INT_CLR 0x418 +#define FRM_WAKEUP 0x41C +#define FRM_CLKCTL_DONE 0x420 +#define FRM_IE_STAT 0x430 +#define FRM_VE_STAT 0x440 + +/* Interface registers */ +#define INTF_CFG 0x600 +#define INTF_STAT 0x604 +#define INTF_INT_EN 0x610 +#define INTF_INT_STAT 0x614 +#define INTF_INT_CLR 0x618 +#define INTF_IE_STAT 0x630 +#define INTF_VE_STAT 0x640 + +/* Interrupt status bits */ +#define MGR_INT_TX_NACKED_2 BIT(25) +#define MGR_INT_MSG_BUF_CONTE BIT(26) +#define MGR_INT_RX_MSG_RCVD BIT(30) +#define MGR_INT_TX_MSG_SENT BIT(31) + +/* Framer config register settings */ +#define FRM_ACTIVE 1 +#define CLK_GEAR 7 +#define ROOT_FREQ 11 +#define REF_CLK_GEAR 15 +#define INTR_WAKE 19 + +#define SLIM_MSG_ASM_FIRST_WORD(l, mt, mc, dt, ad) \ + ((l) | ((mt) << 5) | ((mc) << 8) | ((dt) << 15) | ((ad) << 16)) + +#define SLIM_ROOT_FREQ 24576000 +#define QCOM_SLIM_AUTOSUSPEND 1000 + +/* MAX message size over control channel */ +#define SLIM_MSGQ_BUF_LEN 40 +#define QCOM_TX_MSGS 2 +#define QCOM_RX_MSGS 8 +#define QCOM_BUF_ALLOC_RETRIES 10 + +#define CFG_PORT(r, v) ((v) ? CFG_PORT_V2(r) : CFG_PORT_V1(r)) + +/* V2 Component registers */ +#define CFG_PORT_V2(r) ((r ## _V2)) +#define COMP_CFG_V2 4 +#define COMP_TRUST_CFG_V2 0x3000 + +/* V1 Component registers */ +#define CFG_PORT_V1(r) ((r ## _V1)) +#define COMP_CFG_V1 0 +#define COMP_TRUST_CFG_V1 0x14 + +/* Resource group info for manager, and non-ported generic device-components */ +#define EE_MGR_RSC_GRP (1 << 10) +#define EE_NGD_2 (2 << 6) +#define EE_NGD_1 0 + +struct slim_ctrl_buf { + void *base; + spinlock_t lock; + int head; + int tail; + int sl_sz; + int n; +}; + +struct qcom_slim_ctrl { + struct slim_controller ctrl; + struct slim_framer framer; + struct device *dev; + void __iomem *base; + void __iomem *slew_reg; + + struct slim_ctrl_buf rx; + struct slim_ctrl_buf tx; + + struct completion **wr_comp; + int irq; + struct workqueue_struct *rxwq; + struct work_struct wd; + struct clk *rclk; + struct clk *hclk; +}; + +static void qcom_slim_queue_tx(struct qcom_slim_ctrl *ctrl, void *buf, + u8 len, u32 tx_reg) +{ + int count = (len + 3) >> 2; + + __iowrite32_copy(ctrl->base + tx_reg, buf, count); + + /* Ensure Oder of subsequent writes */ + mb(); +} + +static void *slim_alloc_rxbuf(struct qcom_slim_ctrl *ctrl) +{ + unsigned long flags; + int idx; + + spin_lock_irqsave(&ctrl->rx.lock, flags); + if ((ctrl->rx.tail + 1) % ctrl->rx.n == ctrl->rx.head) { + spin_unlock_irqrestore(&ctrl->rx.lock, flags); + dev_err(ctrl->dev, "RX QUEUE full!"); + return NULL; + } + idx = ctrl->rx.tail; + ctrl->rx.tail = (ctrl->rx.tail + 1) % ctrl->rx.n; + spin_unlock_irqrestore(&ctrl->rx.lock, flags); + + return ctrl->rx.base + (idx * ctrl->rx.sl_sz); +} + +static void slim_ack_txn(struct qcom_slim_ctrl *ctrl, int err) +{ + struct completion *comp; + unsigned long flags; + int idx; + + spin_lock_irqsave(&ctrl->tx.lock, flags); + idx = ctrl->tx.head; + ctrl->tx.head = (ctrl->tx.head + 1) % ctrl->tx.n; + spin_unlock_irqrestore(&ctrl->tx.lock, flags); + + comp = ctrl->wr_comp[idx]; + ctrl->wr_comp[idx] = NULL; + + complete(comp); +} + +static irqreturn_t qcom_slim_handle_tx_irq(struct qcom_slim_ctrl *ctrl, + u32 stat) +{ + int err = 0; + + if (stat & MGR_INT_TX_MSG_SENT) + writel_relaxed(MGR_INT_TX_MSG_SENT, + ctrl->base + MGR_INT_CLR); + + if (stat & MGR_INT_TX_NACKED_2) { + u32 mgr_stat = readl_relaxed(ctrl->base + MGR_STATUS); + u32 mgr_ie_stat = readl_relaxed(ctrl->base + MGR_IE_STAT); + u32 frm_stat = readl_relaxed(ctrl->base + FRM_STAT); + u32 frm_cfg = readl_relaxed(ctrl->base + FRM_CFG); + u32 frm_intr_stat = readl_relaxed(ctrl->base + FRM_INT_STAT); + u32 frm_ie_stat = readl_relaxed(ctrl->base + FRM_IE_STAT); + u32 intf_stat = readl_relaxed(ctrl->base + INTF_STAT); + u32 intf_intr_stat = readl_relaxed(ctrl->base + INTF_INT_STAT); + u32 intf_ie_stat = readl_relaxed(ctrl->base + INTF_IE_STAT); + + writel_relaxed(MGR_INT_TX_NACKED_2, ctrl->base + MGR_INT_CLR); + + dev_err(ctrl->dev, "TX Nack MGR:int:0x%x, stat:0x%x\n", + stat, mgr_stat); + dev_err(ctrl->dev, "TX Nack MGR:ie:0x%x\n", mgr_ie_stat); + dev_err(ctrl->dev, "TX Nack FRM:int:0x%x, stat:0x%x\n", + frm_intr_stat, frm_stat); + dev_err(ctrl->dev, "TX Nack FRM:cfg:0x%x, ie:0x%x\n", + frm_cfg, frm_ie_stat); + dev_err(ctrl->dev, "TX Nack INTF:intr:0x%x, stat:0x%x\n", + intf_intr_stat, intf_stat); + dev_err(ctrl->dev, "TX Nack INTF:ie:0x%x\n", + intf_ie_stat); + err = -ENOTCONN; + } + + slim_ack_txn(ctrl, err); + + return IRQ_HANDLED; +} + +static irqreturn_t qcom_slim_handle_rx_irq(struct qcom_slim_ctrl *ctrl, + u32 stat) +{ + u32 *rx_buf, pkt[10]; + bool q_rx = false; + u8 mc, mt, len; + + pkt[0] = readl_relaxed(ctrl->base + MGR_RX_MSG); + mt = SLIM_HEADER_GET_MT(pkt[0]); + len = SLIM_HEADER_GET_RL(pkt[0]); + mc = SLIM_HEADER_GET_MC(pkt[0]>>8); + + /* + * this message cannot be handled by ISR, so + * let work-queue handle it + */ + if (mt == SLIM_MSG_MT_CORE && mc == SLIM_MSG_MC_REPORT_PRESENT) { + rx_buf = (u32 *)slim_alloc_rxbuf(ctrl); + if (!rx_buf) { + dev_err(ctrl->dev, "dropping RX:0x%x due to RX full\n", + pkt[0]); + goto rx_ret_irq; + } + rx_buf[0] = pkt[0]; + + } else { + rx_buf = pkt; + } + + __ioread32_copy(rx_buf + 1, ctrl->base + MGR_RX_MSG + 4, + DIV_ROUND_UP(len, 4)); + + switch (mc) { + + case SLIM_MSG_MC_REPORT_PRESENT: + q_rx = true; + break; + case SLIM_MSG_MC_REPLY_INFORMATION: + case SLIM_MSG_MC_REPLY_VALUE: + slim_msg_response(&ctrl->ctrl, (u8 *)(rx_buf + 1), + (u8)(*rx_buf >> 24), (len - 4)); + break; + default: + dev_err(ctrl->dev, "unsupported MC,%x MT:%x\n", + mc, mt); + break; + } +rx_ret_irq: + writel(MGR_INT_RX_MSG_RCVD, ctrl->base + + MGR_INT_CLR); + if (q_rx) + queue_work(ctrl->rxwq, &ctrl->wd); + + return IRQ_HANDLED; +} + +static irqreturn_t qcom_slim_interrupt(int irq, void *d) +{ + struct qcom_slim_ctrl *ctrl = d; + u32 stat = readl_relaxed(ctrl->base + MGR_INT_STAT); + int ret = IRQ_NONE; + + if (stat & MGR_INT_TX_MSG_SENT || stat & MGR_INT_TX_NACKED_2) + ret = qcom_slim_handle_tx_irq(ctrl, stat); + + if (stat & MGR_INT_RX_MSG_RCVD) + ret = qcom_slim_handle_rx_irq(ctrl, stat); + + return ret; +} + +static int qcom_clk_pause_wakeup(struct slim_controller *sctrl) +{ + struct qcom_slim_ctrl *ctrl = dev_get_drvdata(sctrl->dev); + + clk_prepare_enable(ctrl->hclk); + clk_prepare_enable(ctrl->rclk); + enable_irq(ctrl->irq); + + writel_relaxed(1, ctrl->base + FRM_WAKEUP); + /* Make sure framer wakeup write goes through before ISR fires */ + mb(); + /* + * HW Workaround: Currently, slave is reporting lost-sync messages + * after SLIMbus comes out of clock pause. + * Transaction with slave fail before slave reports that message + * Give some time for that report to come + * SLIMbus wakes up in clock gear 10 at 24.576MHz. With each superframe + * being 250 usecs, we wait for 5-10 superframes here to ensure + * we get the message + */ + usleep_range(1250, 2500); + return 0; +} + +static void *slim_alloc_txbuf(struct qcom_slim_ctrl *ctrl, + struct slim_msg_txn *txn, + struct completion *done) +{ + unsigned long flags; + int idx; + + spin_lock_irqsave(&ctrl->tx.lock, flags); + if (((ctrl->tx.head + 1) % ctrl->tx.n) == ctrl->tx.tail) { + spin_unlock_irqrestore(&ctrl->tx.lock, flags); + dev_err(ctrl->dev, "controller TX buf unavailable"); + return NULL; + } + idx = ctrl->tx.tail; + ctrl->wr_comp[idx] = done; + ctrl->tx.tail = (ctrl->tx.tail + 1) % ctrl->tx.n; + + spin_unlock_irqrestore(&ctrl->tx.lock, flags); + + return ctrl->tx.base + (idx * ctrl->tx.sl_sz); +} + + +static int qcom_xfer_msg(struct slim_controller *sctrl, + struct slim_msg_txn *txn) +{ + struct qcom_slim_ctrl *ctrl = dev_get_drvdata(sctrl->dev); + DECLARE_COMPLETION_ONSTACK(done); + void *pbuf = slim_alloc_txbuf(ctrl, txn, &done); + unsigned long ms = txn->rl + HZ; + u8 *puc; + int ret = 0, timeout, retries = QCOM_BUF_ALLOC_RETRIES; + u8 la = txn->la; + u32 *head; + /* HW expects length field to be excluded */ + txn->rl--; + + /* spin till buffer is made available */ + if (!pbuf) { + while (retries--) { + usleep_range(10000, 15000); + pbuf = slim_alloc_txbuf(ctrl, txn, &done); + if (pbuf) + break; + } + } + + if (retries < 0 && !pbuf) + return -ENOMEM; + + puc = (u8 *)pbuf; + head = (u32 *)pbuf; + + if (txn->dt == SLIM_MSG_DEST_LOGICALADDR) { + *head = SLIM_MSG_ASM_FIRST_WORD(txn->rl, txn->mt, + txn->mc, 0, la); + puc += 3; + } else { + *head = SLIM_MSG_ASM_FIRST_WORD(txn->rl, txn->mt, + txn->mc, 1, la); + puc += 2; + } + + if (slim_tid_txn(txn->mt, txn->mc)) + *(puc++) = txn->tid; + + if (slim_ec_txn(txn->mt, txn->mc)) { + *(puc++) = (txn->ec & 0xFF); + *(puc++) = (txn->ec >> 8) & 0xFF; + } + + if (txn->msg && txn->msg->wbuf) + memcpy(puc, txn->msg->wbuf, txn->msg->num_bytes); + + qcom_slim_queue_tx(ctrl, head, txn->rl, MGR_TX_MSG); + timeout = wait_for_completion_timeout(&done, msecs_to_jiffies(ms)); + + if (!timeout) { + dev_err(ctrl->dev, "TX timed out:MC:0x%x,mt:0x%x", txn->mc, + txn->mt); + ret = -ETIMEDOUT; + } + + return ret; + +} + +static int qcom_set_laddr(struct slim_controller *sctrl, + struct slim_eaddr *ead, u8 laddr) +{ + struct qcom_slim_ctrl *ctrl = dev_get_drvdata(sctrl->dev); + struct { + __be16 manf_id; + __be16 prod_code; + u8 dev_index; + u8 instance; + u8 laddr; + } __packed p; + struct slim_val_inf msg = {0}; + DEFINE_SLIM_EDEST_TXN(txn, SLIM_MSG_MC_ASSIGN_LOGICAL_ADDRESS, + 10, laddr, &msg); + int ret; + + p.manf_id = cpu_to_be16(ead->manf_id); + p.prod_code = cpu_to_be16(ead->prod_code); + p.dev_index = ead->dev_index; + p.instance = ead->instance; + p.laddr = laddr; + + msg.wbuf = (void *)&p; + msg.num_bytes = 7; + ret = slim_do_transfer(&ctrl->ctrl, &txn); + + if (ret) + dev_err(ctrl->dev, "set LA:0x%x failed:ret:%d\n", + laddr, ret); + return ret; +} + +static int slim_get_current_rxbuf(struct qcom_slim_ctrl *ctrl, void *buf) +{ + unsigned long flags; + + spin_lock_irqsave(&ctrl->rx.lock, flags); + if (ctrl->rx.tail == ctrl->rx.head) { + spin_unlock_irqrestore(&ctrl->rx.lock, flags); + return -ENODATA; + } + memcpy(buf, ctrl->rx.base + (ctrl->rx.head * ctrl->rx.sl_sz), + ctrl->rx.sl_sz); + + ctrl->rx.head = (ctrl->rx.head + 1) % ctrl->rx.n; + spin_unlock_irqrestore(&ctrl->rx.lock, flags); + + return 0; +} + +static void qcom_slim_rxwq(struct work_struct *work) +{ + u8 buf[SLIM_MSGQ_BUF_LEN]; + u8 mc, mt; + int ret; + struct qcom_slim_ctrl *ctrl = container_of(work, struct qcom_slim_ctrl, + wd); + + while ((slim_get_current_rxbuf(ctrl, buf)) != -ENODATA) { + mt = SLIM_HEADER_GET_MT(buf[0]); + mc = SLIM_HEADER_GET_MC(buf[1]); + if (mt == SLIM_MSG_MT_CORE && + mc == SLIM_MSG_MC_REPORT_PRESENT) { + struct slim_eaddr ea; + u8 laddr; + + ea.manf_id = be16_to_cpup((__be16 *)&buf[2]); + ea.prod_code = be16_to_cpup((__be16 *)&buf[4]); + ea.dev_index = buf[6]; + ea.instance = buf[7]; + + ret = slim_device_report_present(&ctrl->ctrl, &ea, + &laddr); + if (ret < 0) + dev_err(ctrl->dev, "assign laddr failed:%d\n", + ret); + } else { + dev_err(ctrl->dev, "unexpected message:mc:%x, mt:%x\n", + mc, mt); + } + } +} + +static void qcom_slim_prg_slew(struct platform_device *pdev, + struct qcom_slim_ctrl *ctrl) +{ + if (!ctrl->slew_reg) { + /* SLEW RATE register for this SLIMbus */ + ctrl->slew_reg = devm_platform_ioremap_resource_byname(pdev, "slew"); + if (IS_ERR(ctrl->slew_reg)) + return; + } + + writel_relaxed(1, ctrl->slew_reg); + /* Make sure SLIMbus-slew rate enabling goes through */ + wmb(); +} + +static int qcom_slim_probe(struct platform_device *pdev) +{ + struct qcom_slim_ctrl *ctrl; + struct slim_controller *sctrl; + struct resource *slim_mem; + int ret, ver; + + ctrl = devm_kzalloc(&pdev->dev, sizeof(*ctrl), GFP_KERNEL); + if (!ctrl) + return -ENOMEM; + + ctrl->hclk = devm_clk_get(&pdev->dev, "iface"); + if (IS_ERR(ctrl->hclk)) + return PTR_ERR(ctrl->hclk); + + ctrl->rclk = devm_clk_get(&pdev->dev, "core"); + if (IS_ERR(ctrl->rclk)) + return PTR_ERR(ctrl->rclk); + + ret = clk_set_rate(ctrl->rclk, SLIM_ROOT_FREQ); + if (ret) { + dev_err(&pdev->dev, "ref-clock set-rate failed:%d\n", ret); + return ret; + } + + ctrl->irq = platform_get_irq(pdev, 0); + if (ctrl->irq < 0) { + dev_err(&pdev->dev, "no slimbus IRQ\n"); + return ctrl->irq; + } + + sctrl = &ctrl->ctrl; + sctrl->dev = &pdev->dev; + ctrl->dev = &pdev->dev; + platform_set_drvdata(pdev, ctrl); + dev_set_drvdata(ctrl->dev, ctrl); + + slim_mem = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl"); + ctrl->base = devm_ioremap_resource(ctrl->dev, slim_mem); + if (IS_ERR(ctrl->base)) + return PTR_ERR(ctrl->base); + + sctrl->set_laddr = qcom_set_laddr; + sctrl->xfer_msg = qcom_xfer_msg; + sctrl->wakeup = qcom_clk_pause_wakeup; + ctrl->tx.n = QCOM_TX_MSGS; + ctrl->tx.sl_sz = SLIM_MSGQ_BUF_LEN; + ctrl->rx.n = QCOM_RX_MSGS; + ctrl->rx.sl_sz = SLIM_MSGQ_BUF_LEN; + ctrl->wr_comp = kcalloc(QCOM_TX_MSGS, sizeof(struct completion *), + GFP_KERNEL); + if (!ctrl->wr_comp) + return -ENOMEM; + + spin_lock_init(&ctrl->rx.lock); + spin_lock_init(&ctrl->tx.lock); + INIT_WORK(&ctrl->wd, qcom_slim_rxwq); + ctrl->rxwq = create_singlethread_workqueue("qcom_slim_rx"); + if (!ctrl->rxwq) { + dev_err(ctrl->dev, "Failed to start Rx WQ\n"); + return -ENOMEM; + } + + ctrl->framer.rootfreq = SLIM_ROOT_FREQ / 8; + ctrl->framer.superfreq = + ctrl->framer.rootfreq / SLIM_CL_PER_SUPERFRAME_DIV8; + sctrl->a_framer = &ctrl->framer; + sctrl->clkgear = SLIM_MAX_CLK_GEAR; + + qcom_slim_prg_slew(pdev, ctrl); + + ret = devm_request_irq(&pdev->dev, ctrl->irq, qcom_slim_interrupt, + IRQF_TRIGGER_HIGH, "qcom_slim_irq", ctrl); + if (ret) { + dev_err(&pdev->dev, "request IRQ failed\n"); + goto err_request_irq_failed; + } + + ret = clk_prepare_enable(ctrl->hclk); + if (ret) + goto err_hclk_enable_failed; + + ret = clk_prepare_enable(ctrl->rclk); + if (ret) + goto err_rclk_enable_failed; + + ctrl->tx.base = devm_kcalloc(&pdev->dev, ctrl->tx.n, ctrl->tx.sl_sz, + GFP_KERNEL); + if (!ctrl->tx.base) { + ret = -ENOMEM; + goto err; + } + + ctrl->rx.base = devm_kcalloc(&pdev->dev,ctrl->rx.n, ctrl->rx.sl_sz, + GFP_KERNEL); + if (!ctrl->rx.base) { + ret = -ENOMEM; + goto err; + } + + /* Register with framework before enabling frame, clock */ + ret = slim_register_controller(&ctrl->ctrl); + if (ret) { + dev_err(ctrl->dev, "error adding controller\n"); + goto err; + } + + ver = readl_relaxed(ctrl->base); + /* Version info in 16 MSbits */ + ver >>= 16; + /* Component register initialization */ + writel(1, ctrl->base + CFG_PORT(COMP_CFG, ver)); + writel((EE_MGR_RSC_GRP | EE_NGD_2 | EE_NGD_1), + ctrl->base + CFG_PORT(COMP_TRUST_CFG, ver)); + + writel((MGR_INT_TX_NACKED_2 | + MGR_INT_MSG_BUF_CONTE | MGR_INT_RX_MSG_RCVD | + MGR_INT_TX_MSG_SENT), ctrl->base + MGR_INT_EN); + writel(1, ctrl->base + MGR_CFG); + /* Framer register initialization */ + writel((1 << INTR_WAKE) | (0xA << REF_CLK_GEAR) | + (0xA << CLK_GEAR) | (1 << ROOT_FREQ) | (1 << FRM_ACTIVE) | 1, + ctrl->base + FRM_CFG); + writel(MGR_CFG_ENABLE, ctrl->base + MGR_CFG); + writel(1, ctrl->base + INTF_CFG); + writel(1, ctrl->base + CFG_PORT(COMP_CFG, ver)); + + pm_runtime_use_autosuspend(&pdev->dev); + pm_runtime_set_autosuspend_delay(&pdev->dev, QCOM_SLIM_AUTOSUSPEND); + pm_runtime_set_active(&pdev->dev); + pm_runtime_mark_last_busy(&pdev->dev); + pm_runtime_enable(&pdev->dev); + + dev_dbg(ctrl->dev, "QCOM SB controller is up:ver:0x%x!\n", ver); + return 0; + +err: + clk_disable_unprepare(ctrl->rclk); +err_rclk_enable_failed: + clk_disable_unprepare(ctrl->hclk); +err_hclk_enable_failed: +err_request_irq_failed: + destroy_workqueue(ctrl->rxwq); + return ret; +} + +static int qcom_slim_remove(struct platform_device *pdev) +{ + struct qcom_slim_ctrl *ctrl = platform_get_drvdata(pdev); + + pm_runtime_disable(&pdev->dev); + slim_unregister_controller(&ctrl->ctrl); + clk_disable_unprepare(ctrl->rclk); + clk_disable_unprepare(ctrl->hclk); + destroy_workqueue(ctrl->rxwq); + return 0; +} + +/* + * If PM_RUNTIME is not defined, these 2 functions become helper + * functions to be called from system suspend/resume. + */ +#ifdef CONFIG_PM +static int qcom_slim_runtime_suspend(struct device *device) +{ + struct qcom_slim_ctrl *ctrl = dev_get_drvdata(device); + int ret; + + dev_dbg(device, "pm_runtime: suspending...\n"); + ret = slim_ctrl_clk_pause(&ctrl->ctrl, false, SLIM_CLK_UNSPECIFIED); + if (ret) { + dev_err(device, "clk pause not entered:%d", ret); + } else { + disable_irq(ctrl->irq); + clk_disable_unprepare(ctrl->hclk); + clk_disable_unprepare(ctrl->rclk); + } + return ret; +} + +static int qcom_slim_runtime_resume(struct device *device) +{ + struct qcom_slim_ctrl *ctrl = dev_get_drvdata(device); + int ret = 0; + + dev_dbg(device, "pm_runtime: resuming...\n"); + ret = slim_ctrl_clk_pause(&ctrl->ctrl, true, 0); + if (ret) + dev_err(device, "clk pause not exited:%d", ret); + return ret; +} +#endif + +#ifdef CONFIG_PM_SLEEP +static int qcom_slim_suspend(struct device *dev) +{ + int ret = 0; + + if (!pm_runtime_enabled(dev) || + (!pm_runtime_suspended(dev))) { + dev_dbg(dev, "system suspend"); + ret = qcom_slim_runtime_suspend(dev); + } + + return ret; +} + +static int qcom_slim_resume(struct device *dev) +{ + if (!pm_runtime_enabled(dev) || !pm_runtime_suspended(dev)) { + int ret; + + dev_dbg(dev, "system resume"); + ret = qcom_slim_runtime_resume(dev); + if (!ret) { + pm_runtime_mark_last_busy(dev); + pm_request_autosuspend(dev); + } + return ret; + + } + return 0; +} +#endif /* CONFIG_PM_SLEEP */ + +static const struct dev_pm_ops qcom_slim_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(qcom_slim_suspend, qcom_slim_resume) + SET_RUNTIME_PM_OPS( + qcom_slim_runtime_suspend, + qcom_slim_runtime_resume, + NULL + ) +}; + +static const struct of_device_id qcom_slim_dt_match[] = { + { .compatible = "qcom,slim", }, + { .compatible = "qcom,apq8064-slim", }, + {} +}; + +static struct platform_driver qcom_slim_driver = { + .probe = qcom_slim_probe, + .remove = qcom_slim_remove, + .driver = { + .name = "qcom_slim_ctrl", + .of_match_table = qcom_slim_dt_match, + .pm = &qcom_slim_dev_pm_ops, + }, +}; +module_platform_driver(qcom_slim_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Qualcomm SLIMbus Controller"); diff --git a/drivers/slimbus/qcom-ngd-ctrl.c b/drivers/slimbus/qcom-ngd-ctrl.c new file mode 100644 index 000000000..d05403762 --- /dev/null +++ b/drivers/slimbus/qcom-ngd-ctrl.c @@ -0,0 +1,1554 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2011-2017, The Linux Foundation. All rights reserved. +// Copyright (c) 2018, Linaro Limited + +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/dmaengine.h> +#include <linux/slimbus.h> +#include <linux/delay.h> +#include <linux/pm_runtime.h> +#include <linux/of.h> +#include <linux/io.h> +#include <linux/soc/qcom/qmi.h> +#include <net/sock.h> +#include "slimbus.h" + +/* NGD (Non-ported Generic Device) registers */ +#define NGD_CFG 0x0 +#define NGD_CFG_ENABLE BIT(0) +#define NGD_CFG_RX_MSGQ_EN BIT(1) +#define NGD_CFG_TX_MSGQ_EN BIT(2) +#define NGD_STATUS 0x4 +#define NGD_LADDR BIT(1) +#define NGD_RX_MSGQ_CFG 0x8 +#define NGD_INT_EN 0x10 +#define NGD_INT_RECFG_DONE BIT(24) +#define NGD_INT_TX_NACKED_2 BIT(25) +#define NGD_INT_MSG_BUF_CONTE BIT(26) +#define NGD_INT_MSG_TX_INVAL BIT(27) +#define NGD_INT_IE_VE_CHG BIT(28) +#define NGD_INT_DEV_ERR BIT(29) +#define NGD_INT_RX_MSG_RCVD BIT(30) +#define NGD_INT_TX_MSG_SENT BIT(31) +#define NGD_INT_STAT 0x14 +#define NGD_INT_CLR 0x18 +#define DEF_NGD_INT_MASK (NGD_INT_TX_NACKED_2 | NGD_INT_MSG_BUF_CONTE | \ + NGD_INT_MSG_TX_INVAL | NGD_INT_IE_VE_CHG | \ + NGD_INT_DEV_ERR | NGD_INT_TX_MSG_SENT | \ + NGD_INT_RX_MSG_RCVD) + +/* Slimbus QMI service */ +#define SLIMBUS_QMI_SVC_ID 0x0301 +#define SLIMBUS_QMI_SVC_V1 1 +#define SLIMBUS_QMI_INS_ID 0 +#define SLIMBUS_QMI_SELECT_INSTANCE_REQ_V01 0x0020 +#define SLIMBUS_QMI_SELECT_INSTANCE_RESP_V01 0x0020 +#define SLIMBUS_QMI_POWER_REQ_V01 0x0021 +#define SLIMBUS_QMI_POWER_RESP_V01 0x0021 +#define SLIMBUS_QMI_CHECK_FRAMER_STATUS_REQ 0x0022 +#define SLIMBUS_QMI_CHECK_FRAMER_STATUS_RESP 0x0022 +#define SLIMBUS_QMI_POWER_REQ_MAX_MSG_LEN 14 +#define SLIMBUS_QMI_POWER_RESP_MAX_MSG_LEN 7 +#define SLIMBUS_QMI_SELECT_INSTANCE_REQ_MAX_MSG_LEN 14 +#define SLIMBUS_QMI_SELECT_INSTANCE_RESP_MAX_MSG_LEN 7 +#define SLIMBUS_QMI_CHECK_FRAMER_STAT_RESP_MAX_MSG_LEN 7 +/* QMI response timeout of 500ms */ +#define SLIMBUS_QMI_RESP_TOUT 1000 + +/* User defined commands */ +#define SLIM_USR_MC_GENERIC_ACK 0x25 +#define SLIM_USR_MC_MASTER_CAPABILITY 0x0 +#define SLIM_USR_MC_REPORT_SATELLITE 0x1 +#define SLIM_USR_MC_ADDR_QUERY 0xD +#define SLIM_USR_MC_ADDR_REPLY 0xE +#define SLIM_USR_MC_DEFINE_CHAN 0x20 +#define SLIM_USR_MC_DEF_ACT_CHAN 0x21 +#define SLIM_USR_MC_CHAN_CTRL 0x23 +#define SLIM_USR_MC_RECONFIG_NOW 0x24 +#define SLIM_USR_MC_REQ_BW 0x28 +#define SLIM_USR_MC_CONNECT_SRC 0x2C +#define SLIM_USR_MC_CONNECT_SINK 0x2D +#define SLIM_USR_MC_DISCONNECT_PORT 0x2E +#define SLIM_USR_MC_REPEAT_CHANGE_VALUE 0x0 + +#define QCOM_SLIM_NGD_AUTOSUSPEND MSEC_PER_SEC +#define SLIM_RX_MSGQ_TIMEOUT_VAL 0x10000 + +#define SLIM_LA_MGR 0xFF +#define SLIM_ROOT_FREQ 24576000 +#define LADDR_RETRY 5 + +/* Per spec.max 40 bytes per received message */ +#define SLIM_MSGQ_BUF_LEN 40 +#define QCOM_SLIM_NGD_DESC_NUM 32 + +#define SLIM_MSG_ASM_FIRST_WORD(l, mt, mc, dt, ad) \ + ((l) | ((mt) << 5) | ((mc) << 8) | ((dt) << 15) | ((ad) << 16)) + +#define INIT_MX_RETRIES 10 +#define DEF_RETRY_MS 10 +#define SAT_MAGIC_LSB 0xD9 +#define SAT_MAGIC_MSB 0xC5 +#define SAT_MSG_VER 0x1 +#define SAT_MSG_PROT 0x1 +#define to_ngd(d) container_of(d, struct qcom_slim_ngd, dev) + +struct ngd_reg_offset_data { + u32 offset, size; +}; + +static const struct ngd_reg_offset_data ngd_v1_5_offset_info = { + .offset = 0x1000, + .size = 0x1000, +}; + +enum qcom_slim_ngd_state { + QCOM_SLIM_NGD_CTRL_AWAKE, + QCOM_SLIM_NGD_CTRL_IDLE, + QCOM_SLIM_NGD_CTRL_ASLEEP, + QCOM_SLIM_NGD_CTRL_DOWN, +}; + +struct qcom_slim_ngd_qmi { + struct qmi_handle qmi; + struct sockaddr_qrtr svc_info; + struct qmi_handle svc_event_hdl; + struct qmi_response_type_v01 resp; + struct qmi_handle *handle; + struct completion qmi_comp; +}; + +struct qcom_slim_ngd_ctrl; +struct qcom_slim_ngd; + +struct qcom_slim_ngd_dma_desc { + struct dma_async_tx_descriptor *desc; + struct qcom_slim_ngd_ctrl *ctrl; + struct completion *comp; + dma_cookie_t cookie; + dma_addr_t phys; + void *base; +}; + +struct qcom_slim_ngd { + struct platform_device *pdev; + void __iomem *base; + int id; +}; + +struct qcom_slim_ngd_ctrl { + struct slim_framer framer; + struct slim_controller ctrl; + struct qcom_slim_ngd_qmi qmi; + struct qcom_slim_ngd *ngd; + struct device *dev; + void __iomem *base; + struct dma_chan *dma_rx_channel; + struct dma_chan *dma_tx_channel; + struct qcom_slim_ngd_dma_desc rx_desc[QCOM_SLIM_NGD_DESC_NUM]; + struct qcom_slim_ngd_dma_desc txdesc[QCOM_SLIM_NGD_DESC_NUM]; + struct completion reconf; + struct work_struct m_work; + struct workqueue_struct *mwq; + spinlock_t tx_buf_lock; + enum qcom_slim_ngd_state state; + dma_addr_t rx_phys_base; + dma_addr_t tx_phys_base; + void *rx_base; + void *tx_base; + int tx_tail; + int tx_head; + u32 ver; +}; + +enum slimbus_mode_enum_type_v01 { + /* To force a 32 bit signed enum. Do not change or use*/ + SLIMBUS_MODE_ENUM_TYPE_MIN_ENUM_VAL_V01 = INT_MIN, + SLIMBUS_MODE_SATELLITE_V01 = 1, + SLIMBUS_MODE_MASTER_V01 = 2, + SLIMBUS_MODE_ENUM_TYPE_MAX_ENUM_VAL_V01 = INT_MAX, +}; + +enum slimbus_pm_enum_type_v01 { + /* To force a 32 bit signed enum. Do not change or use*/ + SLIMBUS_PM_ENUM_TYPE_MIN_ENUM_VAL_V01 = INT_MIN, + SLIMBUS_PM_INACTIVE_V01 = 1, + SLIMBUS_PM_ACTIVE_V01 = 2, + SLIMBUS_PM_ENUM_TYPE_MAX_ENUM_VAL_V01 = INT_MAX, +}; + +enum slimbus_resp_enum_type_v01 { + SLIMBUS_RESP_ENUM_TYPE_MIN_VAL_V01 = INT_MIN, + SLIMBUS_RESP_SYNCHRONOUS_V01 = 1, + SLIMBUS_RESP_ENUM_TYPE_MAX_VAL_V01 = INT_MAX, +}; + +struct slimbus_select_inst_req_msg_v01 { + uint32_t instance; + uint8_t mode_valid; + enum slimbus_mode_enum_type_v01 mode; +}; + +struct slimbus_select_inst_resp_msg_v01 { + struct qmi_response_type_v01 resp; +}; + +struct slimbus_power_req_msg_v01 { + enum slimbus_pm_enum_type_v01 pm_req; + uint8_t resp_type_valid; + enum slimbus_resp_enum_type_v01 resp_type; +}; + +struct slimbus_power_resp_msg_v01 { + struct qmi_response_type_v01 resp; +}; + +static struct qmi_elem_info slimbus_select_inst_req_msg_v01_ei[] = { + { + .data_type = QMI_UNSIGNED_4_BYTE, + .elem_len = 1, + .elem_size = sizeof(uint32_t), + .array_type = NO_ARRAY, + .tlv_type = 0x01, + .offset = offsetof(struct slimbus_select_inst_req_msg_v01, + instance), + .ei_array = NULL, + }, + { + .data_type = QMI_OPT_FLAG, + .elem_len = 1, + .elem_size = sizeof(uint8_t), + .array_type = NO_ARRAY, + .tlv_type = 0x10, + .offset = offsetof(struct slimbus_select_inst_req_msg_v01, + mode_valid), + .ei_array = NULL, + }, + { + .data_type = QMI_UNSIGNED_4_BYTE, + .elem_len = 1, + .elem_size = sizeof(enum slimbus_mode_enum_type_v01), + .array_type = NO_ARRAY, + .tlv_type = 0x10, + .offset = offsetof(struct slimbus_select_inst_req_msg_v01, + mode), + .ei_array = NULL, + }, + { + .data_type = QMI_EOTI, + .elem_len = 0, + .elem_size = 0, + .array_type = NO_ARRAY, + .tlv_type = 0x00, + .offset = 0, + .ei_array = NULL, + }, +}; + +static struct qmi_elem_info slimbus_select_inst_resp_msg_v01_ei[] = { + { + .data_type = QMI_STRUCT, + .elem_len = 1, + .elem_size = sizeof(struct qmi_response_type_v01), + .array_type = NO_ARRAY, + .tlv_type = 0x02, + .offset = offsetof(struct slimbus_select_inst_resp_msg_v01, + resp), + .ei_array = qmi_response_type_v01_ei, + }, + { + .data_type = QMI_EOTI, + .elem_len = 0, + .elem_size = 0, + .array_type = NO_ARRAY, + .tlv_type = 0x00, + .offset = 0, + .ei_array = NULL, + }, +}; + +static struct qmi_elem_info slimbus_power_req_msg_v01_ei[] = { + { + .data_type = QMI_UNSIGNED_4_BYTE, + .elem_len = 1, + .elem_size = sizeof(enum slimbus_pm_enum_type_v01), + .array_type = NO_ARRAY, + .tlv_type = 0x01, + .offset = offsetof(struct slimbus_power_req_msg_v01, + pm_req), + .ei_array = NULL, + }, + { + .data_type = QMI_OPT_FLAG, + .elem_len = 1, + .elem_size = sizeof(uint8_t), + .array_type = NO_ARRAY, + .tlv_type = 0x10, + .offset = offsetof(struct slimbus_power_req_msg_v01, + resp_type_valid), + }, + { + .data_type = QMI_SIGNED_4_BYTE_ENUM, + .elem_len = 1, + .elem_size = sizeof(enum slimbus_resp_enum_type_v01), + .array_type = NO_ARRAY, + .tlv_type = 0x10, + .offset = offsetof(struct slimbus_power_req_msg_v01, + resp_type), + }, + { + .data_type = QMI_EOTI, + .elem_len = 0, + .elem_size = 0, + .array_type = NO_ARRAY, + .tlv_type = 0x00, + .offset = 0, + .ei_array = NULL, + }, +}; + +static struct qmi_elem_info slimbus_power_resp_msg_v01_ei[] = { + { + .data_type = QMI_STRUCT, + .elem_len = 1, + .elem_size = sizeof(struct qmi_response_type_v01), + .array_type = NO_ARRAY, + .tlv_type = 0x02, + .offset = offsetof(struct slimbus_power_resp_msg_v01, resp), + .ei_array = qmi_response_type_v01_ei, + }, + { + .data_type = QMI_EOTI, + .elem_len = 0, + .elem_size = 0, + .array_type = NO_ARRAY, + .tlv_type = 0x00, + .offset = 0, + .ei_array = NULL, + }, +}; + +static int qcom_slim_qmi_send_select_inst_req(struct qcom_slim_ngd_ctrl *ctrl, + struct slimbus_select_inst_req_msg_v01 *req) +{ + struct slimbus_select_inst_resp_msg_v01 resp = { { 0, 0 } }; + struct qmi_txn txn; + int rc; + + rc = qmi_txn_init(ctrl->qmi.handle, &txn, + slimbus_select_inst_resp_msg_v01_ei, &resp); + if (rc < 0) { + dev_err(ctrl->dev, "QMI TXN init fail: %d\n", rc); + return rc; + } + + rc = qmi_send_request(ctrl->qmi.handle, NULL, &txn, + SLIMBUS_QMI_SELECT_INSTANCE_REQ_V01, + SLIMBUS_QMI_SELECT_INSTANCE_REQ_MAX_MSG_LEN, + slimbus_select_inst_req_msg_v01_ei, req); + if (rc < 0) { + dev_err(ctrl->dev, "QMI send req fail %d\n", rc); + qmi_txn_cancel(&txn); + return rc; + } + + rc = qmi_txn_wait(&txn, SLIMBUS_QMI_RESP_TOUT); + if (rc < 0) { + dev_err(ctrl->dev, "QMI TXN wait fail: %d\n", rc); + return rc; + } + /* Check the response */ + if (resp.resp.result != QMI_RESULT_SUCCESS_V01) { + dev_err(ctrl->dev, "QMI request failed 0x%x\n", + resp.resp.result); + return -EREMOTEIO; + } + + return 0; +} + +static void qcom_slim_qmi_power_resp_cb(struct qmi_handle *handle, + struct sockaddr_qrtr *sq, + struct qmi_txn *txn, const void *data) +{ + struct slimbus_power_resp_msg_v01 *resp; + + resp = (struct slimbus_power_resp_msg_v01 *)data; + if (resp->resp.result != QMI_RESULT_SUCCESS_V01) + pr_err("QMI power request failed 0x%x\n", + resp->resp.result); + + complete(&txn->completion); +} + +static int qcom_slim_qmi_send_power_request(struct qcom_slim_ngd_ctrl *ctrl, + struct slimbus_power_req_msg_v01 *req) +{ + struct slimbus_power_resp_msg_v01 resp = { { 0, 0 } }; + struct qmi_txn txn; + int rc; + + rc = qmi_txn_init(ctrl->qmi.handle, &txn, + slimbus_power_resp_msg_v01_ei, &resp); + + rc = qmi_send_request(ctrl->qmi.handle, NULL, &txn, + SLIMBUS_QMI_POWER_REQ_V01, + SLIMBUS_QMI_POWER_REQ_MAX_MSG_LEN, + slimbus_power_req_msg_v01_ei, req); + if (rc < 0) { + dev_err(ctrl->dev, "QMI send req fail %d\n", rc); + qmi_txn_cancel(&txn); + return rc; + } + + rc = qmi_txn_wait(&txn, SLIMBUS_QMI_RESP_TOUT); + if (rc < 0) { + dev_err(ctrl->dev, "QMI TXN wait fail: %d\n", rc); + return rc; + } + + /* Check the response */ + if (resp.resp.result != QMI_RESULT_SUCCESS_V01) { + dev_err(ctrl->dev, "QMI request failed 0x%x\n", + resp.resp.result); + return -EREMOTEIO; + } + + return 0; +} + +static struct qmi_msg_handler qcom_slim_qmi_msg_handlers[] = { + { + .type = QMI_RESPONSE, + .msg_id = SLIMBUS_QMI_POWER_RESP_V01, + .ei = slimbus_power_resp_msg_v01_ei, + .decoded_size = sizeof(struct slimbus_power_resp_msg_v01), + .fn = qcom_slim_qmi_power_resp_cb, + }, + {} +}; + +static int qcom_slim_qmi_init(struct qcom_slim_ngd_ctrl *ctrl, + bool apps_is_master) +{ + struct slimbus_select_inst_req_msg_v01 req; + struct qmi_handle *handle; + int rc; + + handle = devm_kzalloc(ctrl->dev, sizeof(*handle), GFP_KERNEL); + if (!handle) + return -ENOMEM; + + rc = qmi_handle_init(handle, SLIMBUS_QMI_POWER_REQ_MAX_MSG_LEN, + NULL, qcom_slim_qmi_msg_handlers); + if (rc < 0) { + dev_err(ctrl->dev, "QMI client init failed: %d\n", rc); + goto qmi_handle_init_failed; + } + + rc = kernel_connect(handle->sock, + (struct sockaddr *)&ctrl->qmi.svc_info, + sizeof(ctrl->qmi.svc_info), 0); + if (rc < 0) { + dev_err(ctrl->dev, "Remote Service connect failed: %d\n", rc); + goto qmi_connect_to_service_failed; + } + + /* Instance is 0 based */ + req.instance = (ctrl->ngd->id >> 1); + req.mode_valid = 1; + + /* Mode indicates the role of the ADSP */ + if (apps_is_master) + req.mode = SLIMBUS_MODE_SATELLITE_V01; + else + req.mode = SLIMBUS_MODE_MASTER_V01; + + ctrl->qmi.handle = handle; + + rc = qcom_slim_qmi_send_select_inst_req(ctrl, &req); + if (rc) { + dev_err(ctrl->dev, "failed to select h/w instance\n"); + goto qmi_select_instance_failed; + } + + return 0; + +qmi_select_instance_failed: + ctrl->qmi.handle = NULL; +qmi_connect_to_service_failed: + qmi_handle_release(handle); +qmi_handle_init_failed: + devm_kfree(ctrl->dev, handle); + return rc; +} + +static void qcom_slim_qmi_exit(struct qcom_slim_ngd_ctrl *ctrl) +{ + if (!ctrl->qmi.handle) + return; + + qmi_handle_release(ctrl->qmi.handle); + devm_kfree(ctrl->dev, ctrl->qmi.handle); + ctrl->qmi.handle = NULL; +} + +static int qcom_slim_qmi_power_request(struct qcom_slim_ngd_ctrl *ctrl, + bool active) +{ + struct slimbus_power_req_msg_v01 req; + + if (active) + req.pm_req = SLIMBUS_PM_ACTIVE_V01; + else + req.pm_req = SLIMBUS_PM_INACTIVE_V01; + + req.resp_type_valid = 0; + + return qcom_slim_qmi_send_power_request(ctrl, &req); +} + +static u32 *qcom_slim_ngd_tx_msg_get(struct qcom_slim_ngd_ctrl *ctrl, int len, + struct completion *comp) +{ + struct qcom_slim_ngd_dma_desc *desc; + unsigned long flags; + + spin_lock_irqsave(&ctrl->tx_buf_lock, flags); + + if ((ctrl->tx_tail + 1) % QCOM_SLIM_NGD_DESC_NUM == ctrl->tx_head) { + spin_unlock_irqrestore(&ctrl->tx_buf_lock, flags); + return NULL; + } + desc = &ctrl->txdesc[ctrl->tx_tail]; + desc->base = ctrl->tx_base + ctrl->tx_tail * SLIM_MSGQ_BUF_LEN; + desc->comp = comp; + ctrl->tx_tail = (ctrl->tx_tail + 1) % QCOM_SLIM_NGD_DESC_NUM; + + spin_unlock_irqrestore(&ctrl->tx_buf_lock, flags); + + return desc->base; +} + +static void qcom_slim_ngd_tx_msg_dma_cb(void *args) +{ + struct qcom_slim_ngd_dma_desc *desc = args; + struct qcom_slim_ngd_ctrl *ctrl = desc->ctrl; + unsigned long flags; + + spin_lock_irqsave(&ctrl->tx_buf_lock, flags); + + if (desc->comp) { + complete(desc->comp); + desc->comp = NULL; + } + + ctrl->tx_head = (ctrl->tx_head + 1) % QCOM_SLIM_NGD_DESC_NUM; + spin_unlock_irqrestore(&ctrl->tx_buf_lock, flags); +} + +static int qcom_slim_ngd_tx_msg_post(struct qcom_slim_ngd_ctrl *ctrl, + void *buf, int len) +{ + struct qcom_slim_ngd_dma_desc *desc; + unsigned long flags; + int index, offset; + + spin_lock_irqsave(&ctrl->tx_buf_lock, flags); + offset = buf - ctrl->tx_base; + index = offset/SLIM_MSGQ_BUF_LEN; + + desc = &ctrl->txdesc[index]; + desc->phys = ctrl->tx_phys_base + offset; + desc->base = ctrl->tx_base + offset; + desc->ctrl = ctrl; + len = (len + 3) & 0xfc; + + desc->desc = dmaengine_prep_slave_single(ctrl->dma_tx_channel, + desc->phys, len, + DMA_MEM_TO_DEV, + DMA_PREP_INTERRUPT); + if (!desc->desc) { + dev_err(ctrl->dev, "unable to prepare channel\n"); + spin_unlock_irqrestore(&ctrl->tx_buf_lock, flags); + return -EINVAL; + } + + desc->desc->callback = qcom_slim_ngd_tx_msg_dma_cb; + desc->desc->callback_param = desc; + desc->desc->cookie = dmaengine_submit(desc->desc); + dma_async_issue_pending(ctrl->dma_tx_channel); + spin_unlock_irqrestore(&ctrl->tx_buf_lock, flags); + + return 0; +} + +static void qcom_slim_ngd_rx(struct qcom_slim_ngd_ctrl *ctrl, u8 *buf) +{ + u8 mc, mt, len; + + mt = SLIM_HEADER_GET_MT(buf[0]); + len = SLIM_HEADER_GET_RL(buf[0]); + mc = SLIM_HEADER_GET_MC(buf[1]); + + if (mc == SLIM_USR_MC_MASTER_CAPABILITY && + mt == SLIM_MSG_MT_SRC_REFERRED_USER) + queue_work(ctrl->mwq, &ctrl->m_work); + + if (mc == SLIM_MSG_MC_REPLY_INFORMATION || + mc == SLIM_MSG_MC_REPLY_VALUE || (mc == SLIM_USR_MC_ADDR_REPLY && + mt == SLIM_MSG_MT_SRC_REFERRED_USER) || + (mc == SLIM_USR_MC_GENERIC_ACK && + mt == SLIM_MSG_MT_SRC_REFERRED_USER)) { + slim_msg_response(&ctrl->ctrl, &buf[4], buf[3], len - 4); + pm_runtime_mark_last_busy(ctrl->dev); + } +} + +static void qcom_slim_ngd_rx_msgq_cb(void *args) +{ + struct qcom_slim_ngd_dma_desc *desc = args; + struct qcom_slim_ngd_ctrl *ctrl = desc->ctrl; + + qcom_slim_ngd_rx(ctrl, (u8 *)desc->base); + /* Add descriptor back to the queue */ + desc->desc = dmaengine_prep_slave_single(ctrl->dma_rx_channel, + desc->phys, SLIM_MSGQ_BUF_LEN, + DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT); + if (!desc->desc) { + dev_err(ctrl->dev, "Unable to prepare rx channel\n"); + return; + } + + desc->desc->callback = qcom_slim_ngd_rx_msgq_cb; + desc->desc->callback_param = desc; + desc->desc->cookie = dmaengine_submit(desc->desc); + dma_async_issue_pending(ctrl->dma_rx_channel); +} + +static int qcom_slim_ngd_post_rx_msgq(struct qcom_slim_ngd_ctrl *ctrl) +{ + struct qcom_slim_ngd_dma_desc *desc; + int i; + + for (i = 0; i < QCOM_SLIM_NGD_DESC_NUM; i++) { + desc = &ctrl->rx_desc[i]; + desc->phys = ctrl->rx_phys_base + i * SLIM_MSGQ_BUF_LEN; + desc->ctrl = ctrl; + desc->base = ctrl->rx_base + i * SLIM_MSGQ_BUF_LEN; + desc->desc = dmaengine_prep_slave_single(ctrl->dma_rx_channel, + desc->phys, SLIM_MSGQ_BUF_LEN, + DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT); + if (!desc->desc) { + dev_err(ctrl->dev, "Unable to prepare rx channel\n"); + return -EINVAL; + } + + desc->desc->callback = qcom_slim_ngd_rx_msgq_cb; + desc->desc->callback_param = desc; + desc->desc->cookie = dmaengine_submit(desc->desc); + } + dma_async_issue_pending(ctrl->dma_rx_channel); + + return 0; +} + +static int qcom_slim_ngd_init_rx_msgq(struct qcom_slim_ngd_ctrl *ctrl) +{ + struct device *dev = ctrl->dev; + int ret, size; + + ctrl->dma_rx_channel = dma_request_chan(dev, "rx"); + if (IS_ERR(ctrl->dma_rx_channel)) { + dev_err(dev, "Failed to request RX dma channel"); + ret = PTR_ERR(ctrl->dma_rx_channel); + ctrl->dma_rx_channel = NULL; + return ret; + } + + size = QCOM_SLIM_NGD_DESC_NUM * SLIM_MSGQ_BUF_LEN; + ctrl->rx_base = dma_alloc_coherent(dev, size, &ctrl->rx_phys_base, + GFP_KERNEL); + if (!ctrl->rx_base) { + dev_err(dev, "dma_alloc_coherent failed\n"); + ret = -ENOMEM; + goto rel_rx; + } + + ret = qcom_slim_ngd_post_rx_msgq(ctrl); + if (ret) { + dev_err(dev, "post_rx_msgq() failed 0x%x\n", ret); + goto rx_post_err; + } + + return 0; + +rx_post_err: + dma_free_coherent(dev, size, ctrl->rx_base, ctrl->rx_phys_base); +rel_rx: + dma_release_channel(ctrl->dma_rx_channel); + return ret; +} + +static int qcom_slim_ngd_init_tx_msgq(struct qcom_slim_ngd_ctrl *ctrl) +{ + struct device *dev = ctrl->dev; + unsigned long flags; + int ret = 0; + int size; + + ctrl->dma_tx_channel = dma_request_chan(dev, "tx"); + if (IS_ERR(ctrl->dma_tx_channel)) { + dev_err(dev, "Failed to request TX dma channel"); + ret = PTR_ERR(ctrl->dma_tx_channel); + ctrl->dma_tx_channel = NULL; + return ret; + } + + size = ((QCOM_SLIM_NGD_DESC_NUM + 1) * SLIM_MSGQ_BUF_LEN); + ctrl->tx_base = dma_alloc_coherent(dev, size, &ctrl->tx_phys_base, + GFP_KERNEL); + if (!ctrl->tx_base) { + dev_err(dev, "dma_alloc_coherent failed\n"); + ret = -EINVAL; + goto rel_tx; + } + + spin_lock_irqsave(&ctrl->tx_buf_lock, flags); + ctrl->tx_tail = 0; + ctrl->tx_head = 0; + spin_unlock_irqrestore(&ctrl->tx_buf_lock, flags); + + return 0; +rel_tx: + dma_release_channel(ctrl->dma_tx_channel); + return ret; +} + +static int qcom_slim_ngd_init_dma(struct qcom_slim_ngd_ctrl *ctrl) +{ + int ret = 0; + + ret = qcom_slim_ngd_init_rx_msgq(ctrl); + if (ret) { + dev_err(ctrl->dev, "rx dma init failed\n"); + return ret; + } + + ret = qcom_slim_ngd_init_tx_msgq(ctrl); + if (ret) + dev_err(ctrl->dev, "tx dma init failed\n"); + + return ret; +} + +static irqreturn_t qcom_slim_ngd_interrupt(int irq, void *d) +{ + struct qcom_slim_ngd_ctrl *ctrl = d; + void __iomem *base = ctrl->ngd->base; + u32 stat = readl(base + NGD_INT_STAT); + + if ((stat & NGD_INT_MSG_BUF_CONTE) || + (stat & NGD_INT_MSG_TX_INVAL) || (stat & NGD_INT_DEV_ERR) || + (stat & NGD_INT_TX_NACKED_2)) { + dev_err(ctrl->dev, "Error Interrupt received 0x%x\n", stat); + } + + writel(stat, base + NGD_INT_CLR); + + return IRQ_HANDLED; +} + +static int qcom_slim_ngd_xfer_msg(struct slim_controller *sctrl, + struct slim_msg_txn *txn) +{ + struct qcom_slim_ngd_ctrl *ctrl = dev_get_drvdata(sctrl->dev); + DECLARE_COMPLETION_ONSTACK(tx_sent); + DECLARE_COMPLETION_ONSTACK(done); + int ret, timeout, i; + u8 wbuf[SLIM_MSGQ_BUF_LEN]; + u8 rbuf[SLIM_MSGQ_BUF_LEN]; + u32 *pbuf; + u8 *puc; + u8 la = txn->la; + bool usr_msg = false; + + if (txn->mt == SLIM_MSG_MT_CORE && + (txn->mc >= SLIM_MSG_MC_BEGIN_RECONFIGURATION && + txn->mc <= SLIM_MSG_MC_RECONFIGURE_NOW)) + return 0; + + if (txn->dt == SLIM_MSG_DEST_ENUMADDR) + return -EPROTONOSUPPORT; + + if (txn->msg->num_bytes > SLIM_MSGQ_BUF_LEN || + txn->rl > SLIM_MSGQ_BUF_LEN) { + dev_err(ctrl->dev, "msg exceeds HW limit\n"); + return -EINVAL; + } + + pbuf = qcom_slim_ngd_tx_msg_get(ctrl, txn->rl, &tx_sent); + if (!pbuf) { + dev_err(ctrl->dev, "Message buffer unavailable\n"); + return -ENOMEM; + } + + if (txn->mt == SLIM_MSG_MT_CORE && + (txn->mc == SLIM_MSG_MC_CONNECT_SOURCE || + txn->mc == SLIM_MSG_MC_CONNECT_SINK || + txn->mc == SLIM_MSG_MC_DISCONNECT_PORT)) { + txn->mt = SLIM_MSG_MT_DEST_REFERRED_USER; + switch (txn->mc) { + case SLIM_MSG_MC_CONNECT_SOURCE: + txn->mc = SLIM_USR_MC_CONNECT_SRC; + break; + case SLIM_MSG_MC_CONNECT_SINK: + txn->mc = SLIM_USR_MC_CONNECT_SINK; + break; + case SLIM_MSG_MC_DISCONNECT_PORT: + txn->mc = SLIM_USR_MC_DISCONNECT_PORT; + break; + default: + return -EINVAL; + } + + usr_msg = true; + i = 0; + wbuf[i++] = txn->la; + la = SLIM_LA_MGR; + wbuf[i++] = txn->msg->wbuf[0]; + if (txn->mc != SLIM_USR_MC_DISCONNECT_PORT) + wbuf[i++] = txn->msg->wbuf[1]; + + txn->comp = &done; + ret = slim_alloc_txn_tid(sctrl, txn); + if (ret) { + dev_err(ctrl->dev, "Unable to allocate TID\n"); + return ret; + } + + wbuf[i++] = txn->tid; + + txn->msg->num_bytes = i; + txn->msg->wbuf = wbuf; + txn->msg->rbuf = rbuf; + txn->rl = txn->msg->num_bytes + 4; + } + + /* HW expects length field to be excluded */ + txn->rl--; + puc = (u8 *)pbuf; + *pbuf = 0; + if (txn->dt == SLIM_MSG_DEST_LOGICALADDR) { + *pbuf = SLIM_MSG_ASM_FIRST_WORD(txn->rl, txn->mt, txn->mc, 0, + la); + puc += 3; + } else { + *pbuf = SLIM_MSG_ASM_FIRST_WORD(txn->rl, txn->mt, txn->mc, 1, + la); + puc += 2; + } + + if (slim_tid_txn(txn->mt, txn->mc)) + *(puc++) = txn->tid; + + if (slim_ec_txn(txn->mt, txn->mc)) { + *(puc++) = (txn->ec & 0xFF); + *(puc++) = (txn->ec >> 8) & 0xFF; + } + + if (txn->msg && txn->msg->wbuf) + memcpy(puc, txn->msg->wbuf, txn->msg->num_bytes); + + ret = qcom_slim_ngd_tx_msg_post(ctrl, pbuf, txn->rl); + if (ret) + return ret; + + timeout = wait_for_completion_timeout(&tx_sent, HZ); + if (!timeout) { + dev_err(sctrl->dev, "TX timed out:MC:0x%x,mt:0x%x", txn->mc, + txn->mt); + return -ETIMEDOUT; + } + + if (usr_msg) { + timeout = wait_for_completion_timeout(&done, HZ); + if (!timeout) { + dev_err(sctrl->dev, "TX timed out:MC:0x%x,mt:0x%x", + txn->mc, txn->mt); + return -ETIMEDOUT; + } + } + + return 0; +} + +static int qcom_slim_ngd_xfer_msg_sync(struct slim_controller *ctrl, + struct slim_msg_txn *txn) +{ + DECLARE_COMPLETION_ONSTACK(done); + int ret, timeout; + + pm_runtime_get_sync(ctrl->dev); + + txn->comp = &done; + + ret = qcom_slim_ngd_xfer_msg(ctrl, txn); + if (ret) + return ret; + + timeout = wait_for_completion_timeout(&done, HZ); + if (!timeout) { + dev_err(ctrl->dev, "TX timed out:MC:0x%x,mt:0x%x", txn->mc, + txn->mt); + return -ETIMEDOUT; + } + return 0; +} + +static int qcom_slim_ngd_enable_stream(struct slim_stream_runtime *rt) +{ + struct slim_device *sdev = rt->dev; + struct slim_controller *ctrl = sdev->ctrl; + struct slim_val_inf msg = {0}; + u8 wbuf[SLIM_MSGQ_BUF_LEN]; + u8 rbuf[SLIM_MSGQ_BUF_LEN]; + struct slim_msg_txn txn = {0,}; + int i, ret; + + txn.mt = SLIM_MSG_MT_DEST_REFERRED_USER; + txn.dt = SLIM_MSG_DEST_LOGICALADDR; + txn.la = SLIM_LA_MGR; + txn.ec = 0; + txn.msg = &msg; + txn.msg->num_bytes = 0; + txn.msg->wbuf = wbuf; + txn.msg->rbuf = rbuf; + + for (i = 0; i < rt->num_ports; i++) { + struct slim_port *port = &rt->ports[i]; + + if (txn.msg->num_bytes == 0) { + int seg_interval = SLIM_SLOTS_PER_SUPERFRAME/rt->ratem; + int exp; + + wbuf[txn.msg->num_bytes++] = sdev->laddr; + wbuf[txn.msg->num_bytes] = rt->bps >> 2 | + (port->ch.aux_fmt << 6); + + /* Data channel segment interval not multiple of 3 */ + exp = seg_interval % 3; + if (exp) + wbuf[txn.msg->num_bytes] |= BIT(5); + + txn.msg->num_bytes++; + wbuf[txn.msg->num_bytes++] = exp << 4 | rt->prot; + + if (rt->prot == SLIM_PROTO_ISO) + wbuf[txn.msg->num_bytes++] = + port->ch.prrate | + SLIM_CHANNEL_CONTENT_FL; + else + wbuf[txn.msg->num_bytes++] = port->ch.prrate; + + ret = slim_alloc_txn_tid(ctrl, &txn); + if (ret) { + dev_err(&sdev->dev, "Fail to allocate TID\n"); + return -ENXIO; + } + wbuf[txn.msg->num_bytes++] = txn.tid; + } + wbuf[txn.msg->num_bytes++] = port->ch.id; + } + + txn.mc = SLIM_USR_MC_DEF_ACT_CHAN; + txn.rl = txn.msg->num_bytes + 4; + ret = qcom_slim_ngd_xfer_msg_sync(ctrl, &txn); + if (ret) { + slim_free_txn_tid(ctrl, &txn); + dev_err(&sdev->dev, "TX timed out:MC:0x%x,mt:0x%x", txn.mc, + txn.mt); + return ret; + } + + txn.mc = SLIM_USR_MC_RECONFIG_NOW; + txn.msg->num_bytes = 2; + wbuf[1] = sdev->laddr; + txn.rl = txn.msg->num_bytes + 4; + + ret = slim_alloc_txn_tid(ctrl, &txn); + if (ret) { + dev_err(ctrl->dev, "Fail to allocate TID\n"); + return ret; + } + + wbuf[0] = txn.tid; + ret = qcom_slim_ngd_xfer_msg_sync(ctrl, &txn); + if (ret) { + slim_free_txn_tid(ctrl, &txn); + dev_err(&sdev->dev, "TX timed out:MC:0x%x,mt:0x%x", txn.mc, + txn.mt); + } + + return ret; +} + +static int qcom_slim_ngd_get_laddr(struct slim_controller *ctrl, + struct slim_eaddr *ea, u8 *laddr) +{ + struct slim_val_inf msg = {0}; + u8 failed_ea[6] = {0, 0, 0, 0, 0, 0}; + struct slim_msg_txn txn; + u8 wbuf[10] = {0}; + u8 rbuf[10] = {0}; + int ret; + + txn.mt = SLIM_MSG_MT_DEST_REFERRED_USER; + txn.dt = SLIM_MSG_DEST_LOGICALADDR; + txn.la = SLIM_LA_MGR; + txn.ec = 0; + + txn.mc = SLIM_USR_MC_ADDR_QUERY; + txn.rl = 11; + txn.msg = &msg; + txn.msg->num_bytes = 7; + txn.msg->wbuf = wbuf; + txn.msg->rbuf = rbuf; + + ret = slim_alloc_txn_tid(ctrl, &txn); + if (ret < 0) + return ret; + + wbuf[0] = (u8)txn.tid; + memcpy(&wbuf[1], ea, sizeof(*ea)); + + ret = qcom_slim_ngd_xfer_msg_sync(ctrl, &txn); + if (ret) { + slim_free_txn_tid(ctrl, &txn); + return ret; + } + + if (!memcmp(rbuf, failed_ea, 6)) + return -ENXIO; + + *laddr = rbuf[6]; + + return ret; +} + +static int qcom_slim_ngd_exit_dma(struct qcom_slim_ngd_ctrl *ctrl) +{ + if (ctrl->dma_rx_channel) { + dmaengine_terminate_sync(ctrl->dma_rx_channel); + dma_release_channel(ctrl->dma_rx_channel); + } + + if (ctrl->dma_tx_channel) { + dmaengine_terminate_sync(ctrl->dma_tx_channel); + dma_release_channel(ctrl->dma_tx_channel); + } + + ctrl->dma_tx_channel = ctrl->dma_rx_channel = NULL; + + return 0; +} + +static void qcom_slim_ngd_setup(struct qcom_slim_ngd_ctrl *ctrl) +{ + u32 cfg = readl_relaxed(ctrl->ngd->base); + + if (ctrl->state == QCOM_SLIM_NGD_CTRL_DOWN || + ctrl->state == QCOM_SLIM_NGD_CTRL_ASLEEP) + qcom_slim_ngd_init_dma(ctrl); + + /* By default enable message queues */ + cfg |= NGD_CFG_RX_MSGQ_EN; + cfg |= NGD_CFG_TX_MSGQ_EN; + + /* Enable NGD if it's not already enabled*/ + if (!(cfg & NGD_CFG_ENABLE)) + cfg |= NGD_CFG_ENABLE; + + writel_relaxed(cfg, ctrl->ngd->base); +} + +static int qcom_slim_ngd_power_up(struct qcom_slim_ngd_ctrl *ctrl) +{ + enum qcom_slim_ngd_state cur_state = ctrl->state; + struct qcom_slim_ngd *ngd = ctrl->ngd; + u32 laddr, rx_msgq; + int timeout, ret = 0; + + if (ctrl->state == QCOM_SLIM_NGD_CTRL_DOWN) { + timeout = wait_for_completion_timeout(&ctrl->qmi.qmi_comp, HZ); + if (!timeout) + return -EREMOTEIO; + } + + if (ctrl->state == QCOM_SLIM_NGD_CTRL_ASLEEP || + ctrl->state == QCOM_SLIM_NGD_CTRL_DOWN) { + ret = qcom_slim_qmi_power_request(ctrl, true); + if (ret) { + dev_err(ctrl->dev, "SLIM QMI power request failed:%d\n", + ret); + return ret; + } + } + + ctrl->ver = readl_relaxed(ctrl->base); + /* Version info in 16 MSbits */ + ctrl->ver >>= 16; + + laddr = readl_relaxed(ngd->base + NGD_STATUS); + if (laddr & NGD_LADDR) { + /* + * external MDM restart case where ADSP itself was active framer + * For example, modem restarted when playback was active + */ + if (cur_state == QCOM_SLIM_NGD_CTRL_AWAKE) { + dev_info(ctrl->dev, "Subsys restart: ADSP active framer\n"); + return 0; + } + qcom_slim_ngd_setup(ctrl); + return 0; + } + + writel_relaxed(DEF_NGD_INT_MASK, ngd->base + NGD_INT_EN); + rx_msgq = readl_relaxed(ngd->base + NGD_RX_MSGQ_CFG); + + writel_relaxed(rx_msgq|SLIM_RX_MSGQ_TIMEOUT_VAL, + ngd->base + NGD_RX_MSGQ_CFG); + qcom_slim_ngd_setup(ctrl); + + timeout = wait_for_completion_timeout(&ctrl->reconf, HZ); + if (!timeout) { + dev_err(ctrl->dev, "capability exchange timed-out\n"); + return -ETIMEDOUT; + } + + return 0; +} + +static void qcom_slim_ngd_notify_slaves(struct qcom_slim_ngd_ctrl *ctrl) +{ + struct slim_device *sbdev; + struct device_node *node; + + for_each_child_of_node(ctrl->ngd->pdev->dev.of_node, node) { + sbdev = of_slim_get_device(&ctrl->ctrl, node); + if (!sbdev) + continue; + + if (slim_get_logical_addr(sbdev)) + dev_err(ctrl->dev, "Failed to get logical address\n"); + } +} + +static void qcom_slim_ngd_master_worker(struct work_struct *work) +{ + struct qcom_slim_ngd_ctrl *ctrl; + struct slim_msg_txn txn; + struct slim_val_inf msg = {0}; + int retries = 0; + u8 wbuf[8]; + int ret = 0; + + ctrl = container_of(work, struct qcom_slim_ngd_ctrl, m_work); + txn.dt = SLIM_MSG_DEST_LOGICALADDR; + txn.ec = 0; + txn.mc = SLIM_USR_MC_REPORT_SATELLITE; + txn.mt = SLIM_MSG_MT_SRC_REFERRED_USER; + txn.la = SLIM_LA_MGR; + wbuf[0] = SAT_MAGIC_LSB; + wbuf[1] = SAT_MAGIC_MSB; + wbuf[2] = SAT_MSG_VER; + wbuf[3] = SAT_MSG_PROT; + txn.msg = &msg; + txn.msg->wbuf = wbuf; + txn.msg->num_bytes = 4; + txn.rl = 8; + + dev_info(ctrl->dev, "SLIM SAT: Rcvd master capability\n"); + +capability_retry: + ret = qcom_slim_ngd_xfer_msg(&ctrl->ctrl, &txn); + if (!ret) { + if (ctrl->state >= QCOM_SLIM_NGD_CTRL_ASLEEP) + complete(&ctrl->reconf); + else + dev_err(ctrl->dev, "unexpected state:%d\n", + ctrl->state); + + if (ctrl->state == QCOM_SLIM_NGD_CTRL_DOWN) + qcom_slim_ngd_notify_slaves(ctrl); + + } else if (ret == -EIO) { + dev_err(ctrl->dev, "capability message NACKed, retrying\n"); + if (retries < INIT_MX_RETRIES) { + msleep(DEF_RETRY_MS); + retries++; + goto capability_retry; + } + } else { + dev_err(ctrl->dev, "SLIM: capability TX failed:%d\n", ret); + } +} + +static int qcom_slim_ngd_runtime_resume(struct device *dev) +{ + struct qcom_slim_ngd_ctrl *ctrl = dev_get_drvdata(dev); + int ret = 0; + + if (!ctrl->qmi.handle) + return 0; + + if (ctrl->state >= QCOM_SLIM_NGD_CTRL_ASLEEP) + ret = qcom_slim_ngd_power_up(ctrl); + if (ret) { + /* Did SSR cause this power up failure */ + if (ctrl->state != QCOM_SLIM_NGD_CTRL_DOWN) + ctrl->state = QCOM_SLIM_NGD_CTRL_ASLEEP; + else + dev_err(ctrl->dev, "HW wakeup attempt during SSR\n"); + } else { + ctrl->state = QCOM_SLIM_NGD_CTRL_AWAKE; + } + + return 0; +} + +static int qcom_slim_ngd_enable(struct qcom_slim_ngd_ctrl *ctrl, bool enable) +{ + if (enable) { + int ret = qcom_slim_qmi_init(ctrl, false); + + if (ret) { + dev_err(ctrl->dev, "qmi init fail, ret:%d, state:%d\n", + ret, ctrl->state); + return ret; + } + /* controller state should be in sync with framework state */ + complete(&ctrl->qmi.qmi_comp); + if (!pm_runtime_enabled(ctrl->dev) || + !pm_runtime_suspended(ctrl->dev)) + qcom_slim_ngd_runtime_resume(ctrl->dev); + else + pm_runtime_resume(ctrl->dev); + pm_runtime_mark_last_busy(ctrl->dev); + pm_runtime_put(ctrl->dev); + + ret = slim_register_controller(&ctrl->ctrl); + if (ret) { + dev_err(ctrl->dev, "error adding slim controller\n"); + return ret; + } + + dev_info(ctrl->dev, "SLIM controller Registered\n"); + } else { + qcom_slim_qmi_exit(ctrl); + slim_unregister_controller(&ctrl->ctrl); + } + + return 0; +} + +static int qcom_slim_ngd_qmi_new_server(struct qmi_handle *hdl, + struct qmi_service *service) +{ + struct qcom_slim_ngd_qmi *qmi = + container_of(hdl, struct qcom_slim_ngd_qmi, svc_event_hdl); + struct qcom_slim_ngd_ctrl *ctrl = + container_of(qmi, struct qcom_slim_ngd_ctrl, qmi); + + qmi->svc_info.sq_family = AF_QIPCRTR; + qmi->svc_info.sq_node = service->node; + qmi->svc_info.sq_port = service->port; + + qcom_slim_ngd_enable(ctrl, true); + + return 0; +} + +static void qcom_slim_ngd_qmi_del_server(struct qmi_handle *hdl, + struct qmi_service *service) +{ + struct qcom_slim_ngd_qmi *qmi = + container_of(hdl, struct qcom_slim_ngd_qmi, svc_event_hdl); + struct qcom_slim_ngd_ctrl *ctrl = + container_of(qmi, struct qcom_slim_ngd_ctrl, qmi); + + qmi->svc_info.sq_node = 0; + qmi->svc_info.sq_port = 0; + + qcom_slim_ngd_enable(ctrl, false); +} + +static struct qmi_ops qcom_slim_ngd_qmi_svc_event_ops = { + .new_server = qcom_slim_ngd_qmi_new_server, + .del_server = qcom_slim_ngd_qmi_del_server, +}; + +static int qcom_slim_ngd_qmi_svc_event_init(struct qcom_slim_ngd_ctrl *ctrl) +{ + struct qcom_slim_ngd_qmi *qmi = &ctrl->qmi; + int ret; + + ret = qmi_handle_init(&qmi->svc_event_hdl, 0, + &qcom_slim_ngd_qmi_svc_event_ops, NULL); + if (ret < 0) { + dev_err(ctrl->dev, "qmi_handle_init failed: %d\n", ret); + return ret; + } + + ret = qmi_add_lookup(&qmi->svc_event_hdl, SLIMBUS_QMI_SVC_ID, + SLIMBUS_QMI_SVC_V1, SLIMBUS_QMI_INS_ID); + if (ret < 0) { + dev_err(ctrl->dev, "qmi_add_lookup failed: %d\n", ret); + qmi_handle_release(&qmi->svc_event_hdl); + } + return ret; +} + +static void qcom_slim_ngd_qmi_svc_event_deinit(struct qcom_slim_ngd_qmi *qmi) +{ + qmi_handle_release(&qmi->svc_event_hdl); +} + +static struct platform_driver qcom_slim_ngd_driver; +#define QCOM_SLIM_NGD_DRV_NAME "qcom,slim-ngd" + +static const struct of_device_id qcom_slim_ngd_dt_match[] = { + { + .compatible = "qcom,slim-ngd-v1.5.0", + .data = &ngd_v1_5_offset_info, + },{ + .compatible = "qcom,slim-ngd-v2.1.0", + .data = &ngd_v1_5_offset_info, + }, + {} +}; + +MODULE_DEVICE_TABLE(of, qcom_slim_ngd_dt_match); + +static int of_qcom_slim_ngd_register(struct device *parent, + struct qcom_slim_ngd_ctrl *ctrl) +{ + const struct ngd_reg_offset_data *data; + struct qcom_slim_ngd *ngd; + const struct of_device_id *match; + struct device_node *node; + u32 id; + + match = of_match_node(qcom_slim_ngd_dt_match, parent->of_node); + data = match->data; + for_each_available_child_of_node(parent->of_node, node) { + if (of_property_read_u32(node, "reg", &id)) + continue; + + ngd = kzalloc(sizeof(*ngd), GFP_KERNEL); + if (!ngd) { + of_node_put(node); + return -ENOMEM; + } + + ngd->pdev = platform_device_alloc(QCOM_SLIM_NGD_DRV_NAME, id); + if (!ngd->pdev) { + kfree(ngd); + of_node_put(node); + return -ENOMEM; + } + ngd->id = id; + ngd->pdev->dev.parent = parent; + ngd->pdev->driver_override = QCOM_SLIM_NGD_DRV_NAME; + ngd->pdev->dev.of_node = node; + ctrl->ngd = ngd; + + platform_device_add(ngd->pdev); + ngd->base = ctrl->base + ngd->id * data->offset + + (ngd->id - 1) * data->size; + + return 0; + } + + return -ENODEV; +} + +static int qcom_slim_ngd_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct qcom_slim_ngd_ctrl *ctrl = dev_get_drvdata(dev->parent); + int ret; + + ctrl->ctrl.dev = dev; + + platform_set_drvdata(pdev, ctrl); + pm_runtime_use_autosuspend(dev); + pm_runtime_set_autosuspend_delay(dev, QCOM_SLIM_NGD_AUTOSUSPEND); + pm_runtime_set_suspended(dev); + pm_runtime_enable(dev); + pm_runtime_get_noresume(dev); + ret = qcom_slim_ngd_qmi_svc_event_init(ctrl); + if (ret) { + dev_err(&pdev->dev, "QMI service registration failed:%d", ret); + return ret; + } + + INIT_WORK(&ctrl->m_work, qcom_slim_ngd_master_worker); + ctrl->mwq = create_singlethread_workqueue("ngd_master"); + if (!ctrl->mwq) { + dev_err(&pdev->dev, "Failed to start master worker\n"); + ret = -ENOMEM; + goto wq_err; + } + + return 0; +wq_err: + qcom_slim_ngd_qmi_svc_event_deinit(&ctrl->qmi); + if (ctrl->mwq) + destroy_workqueue(ctrl->mwq); + + return ret; +} + +static int qcom_slim_ngd_ctrl_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct qcom_slim_ngd_ctrl *ctrl; + struct resource *res; + int ret; + + ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL); + if (!ctrl) + return -ENOMEM; + + dev_set_drvdata(dev, ctrl); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + ctrl->base = devm_ioremap_resource(dev, res); + if (IS_ERR(ctrl->base)) + return PTR_ERR(ctrl->base); + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res) { + dev_err(&pdev->dev, "no slimbus IRQ resource\n"); + return -ENODEV; + } + + ret = devm_request_irq(dev, res->start, qcom_slim_ngd_interrupt, + IRQF_TRIGGER_HIGH, "slim-ngd", ctrl); + if (ret) { + dev_err(&pdev->dev, "request IRQ failed\n"); + return ret; + } + + ctrl->dev = dev; + ctrl->framer.rootfreq = SLIM_ROOT_FREQ >> 3; + ctrl->framer.superfreq = + ctrl->framer.rootfreq / SLIM_CL_PER_SUPERFRAME_DIV8; + + ctrl->ctrl.a_framer = &ctrl->framer; + ctrl->ctrl.clkgear = SLIM_MAX_CLK_GEAR; + ctrl->ctrl.get_laddr = qcom_slim_ngd_get_laddr; + ctrl->ctrl.enable_stream = qcom_slim_ngd_enable_stream; + ctrl->ctrl.xfer_msg = qcom_slim_ngd_xfer_msg; + ctrl->ctrl.wakeup = NULL; + ctrl->state = QCOM_SLIM_NGD_CTRL_DOWN; + + spin_lock_init(&ctrl->tx_buf_lock); + init_completion(&ctrl->reconf); + init_completion(&ctrl->qmi.qmi_comp); + + platform_driver_register(&qcom_slim_ngd_driver); + return of_qcom_slim_ngd_register(dev, ctrl); +} + +static int qcom_slim_ngd_ctrl_remove(struct platform_device *pdev) +{ + platform_driver_unregister(&qcom_slim_ngd_driver); + + return 0; +} + +static int qcom_slim_ngd_remove(struct platform_device *pdev) +{ + struct qcom_slim_ngd_ctrl *ctrl = platform_get_drvdata(pdev); + + pm_runtime_disable(&pdev->dev); + qcom_slim_ngd_enable(ctrl, false); + qcom_slim_ngd_exit_dma(ctrl); + qcom_slim_ngd_qmi_svc_event_deinit(&ctrl->qmi); + if (ctrl->mwq) + destroy_workqueue(ctrl->mwq); + + kfree(ctrl->ngd); + ctrl->ngd = NULL; + return 0; +} + +static int __maybe_unused qcom_slim_ngd_runtime_idle(struct device *dev) +{ + struct qcom_slim_ngd_ctrl *ctrl = dev_get_drvdata(dev); + + if (ctrl->state == QCOM_SLIM_NGD_CTRL_AWAKE) + ctrl->state = QCOM_SLIM_NGD_CTRL_IDLE; + pm_request_autosuspend(dev); + return -EAGAIN; +} + +static int __maybe_unused qcom_slim_ngd_runtime_suspend(struct device *dev) +{ + struct qcom_slim_ngd_ctrl *ctrl = dev_get_drvdata(dev); + int ret = 0; + + qcom_slim_ngd_exit_dma(ctrl); + if (!ctrl->qmi.handle) + return 0; + + ret = qcom_slim_qmi_power_request(ctrl, false); + if (ret && ret != -EBUSY) + dev_info(ctrl->dev, "slim resource not idle:%d\n", ret); + if (!ret || ret == -ETIMEDOUT) + ctrl->state = QCOM_SLIM_NGD_CTRL_ASLEEP; + + return ret; +} + +static const struct dev_pm_ops qcom_slim_ngd_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) + SET_RUNTIME_PM_OPS( + qcom_slim_ngd_runtime_suspend, + qcom_slim_ngd_runtime_resume, + qcom_slim_ngd_runtime_idle + ) +}; + +static struct platform_driver qcom_slim_ngd_ctrl_driver = { + .probe = qcom_slim_ngd_ctrl_probe, + .remove = qcom_slim_ngd_ctrl_remove, + .driver = { + .name = "qcom,slim-ngd-ctrl", + .of_match_table = qcom_slim_ngd_dt_match, + }, +}; + +static struct platform_driver qcom_slim_ngd_driver = { + .probe = qcom_slim_ngd_probe, + .remove = qcom_slim_ngd_remove, + .driver = { + .name = QCOM_SLIM_NGD_DRV_NAME, + .pm = &qcom_slim_ngd_dev_pm_ops, + }, +}; + +module_platform_driver(qcom_slim_ngd_ctrl_driver); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Qualcomm SLIMBus NGD controller"); diff --git a/drivers/slimbus/sched.c b/drivers/slimbus/sched.c new file mode 100644 index 000000000..af84997d2 --- /dev/null +++ b/drivers/slimbus/sched.c @@ -0,0 +1,121 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2011-2017, The Linux Foundation + */ + +#include <linux/errno.h> +#include "slimbus.h" + +/** + * slim_ctrl_clk_pause() - Called by slimbus controller to enter/exit + * 'clock pause' + * @ctrl: controller requesting bus to be paused or woken up + * @wakeup: Wakeup this controller from clock pause. + * @restart: Restart time value per spec used for clock pause. This value + * isn't used when controller is to be woken up. + * + * Slimbus specification needs this sequence to turn-off clocks for the bus. + * The sequence involves sending 3 broadcast messages (reconfiguration + * sequence) to inform all devices on the bus. + * To exit clock-pause, controller typically wakes up active framer device. + * This API executes clock pause reconfiguration sequence if wakeup is false. + * If wakeup is true, controller's wakeup is called. + * For entering clock-pause, -EBUSY is returned if a message txn in pending. + */ +int slim_ctrl_clk_pause(struct slim_controller *ctrl, bool wakeup, u8 restart) +{ + int i, ret = 0; + unsigned long flags; + struct slim_sched *sched = &ctrl->sched; + struct slim_val_inf msg = {0, 0, NULL, NULL}; + + DEFINE_SLIM_BCAST_TXN(txn, SLIM_MSG_MC_BEGIN_RECONFIGURATION, + 3, SLIM_LA_MANAGER, &msg); + + if (wakeup == false && restart > SLIM_CLK_UNSPECIFIED) + return -EINVAL; + + mutex_lock(&sched->m_reconf); + if (wakeup) { + if (sched->clk_state == SLIM_CLK_ACTIVE) { + mutex_unlock(&sched->m_reconf); + return 0; + } + + /* + * Fine-tune calculation based on clock gear, + * message-bandwidth after bandwidth management + */ + ret = wait_for_completion_timeout(&sched->pause_comp, + msecs_to_jiffies(100)); + if (!ret) { + mutex_unlock(&sched->m_reconf); + pr_err("Previous clock pause did not finish"); + return -ETIMEDOUT; + } + ret = 0; + + /* + * Slimbus framework will call controller wakeup + * Controller should make sure that it sets active framer + * out of clock pause + */ + if (sched->clk_state == SLIM_CLK_PAUSED && ctrl->wakeup) + ret = ctrl->wakeup(ctrl); + if (!ret) + sched->clk_state = SLIM_CLK_ACTIVE; + mutex_unlock(&sched->m_reconf); + + return ret; + } + + /* already paused */ + if (ctrl->sched.clk_state == SLIM_CLK_PAUSED) { + mutex_unlock(&sched->m_reconf); + return 0; + } + + spin_lock_irqsave(&ctrl->txn_lock, flags); + for (i = 0; i < SLIM_MAX_TIDS; i++) { + /* Pending response for a message */ + if (idr_find(&ctrl->tid_idr, i)) { + spin_unlock_irqrestore(&ctrl->txn_lock, flags); + mutex_unlock(&sched->m_reconf); + return -EBUSY; + } + } + spin_unlock_irqrestore(&ctrl->txn_lock, flags); + + sched->clk_state = SLIM_CLK_ENTERING_PAUSE; + + /* clock pause sequence */ + ret = slim_do_transfer(ctrl, &txn); + if (ret) + goto clk_pause_ret; + + txn.mc = SLIM_MSG_MC_NEXT_PAUSE_CLOCK; + txn.rl = 4; + msg.num_bytes = 1; + msg.wbuf = &restart; + ret = slim_do_transfer(ctrl, &txn); + if (ret) + goto clk_pause_ret; + + txn.mc = SLIM_MSG_MC_RECONFIGURE_NOW; + txn.rl = 3; + msg.num_bytes = 1; + msg.wbuf = NULL; + ret = slim_do_transfer(ctrl, &txn); + +clk_pause_ret: + if (ret) { + sched->clk_state = SLIM_CLK_ACTIVE; + } else { + sched->clk_state = SLIM_CLK_PAUSED; + complete(&sched->pause_comp); + } + mutex_unlock(&sched->m_reconf); + + return ret; +} +EXPORT_SYMBOL_GPL(slim_ctrl_clk_pause); diff --git a/drivers/slimbus/slimbus.h b/drivers/slimbus/slimbus.h new file mode 100644 index 000000000..c73035915 --- /dev/null +++ b/drivers/slimbus/slimbus.h @@ -0,0 +1,453 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2011-2017, The Linux Foundation + */ + +#ifndef _DRIVERS_SLIMBUS_H +#define _DRIVERS_SLIMBUS_H +#include <linux/module.h> +#include <linux/device.h> +#include <linux/mutex.h> +#include <linux/completion.h> +#include <linux/slimbus.h> + +/* Standard values per SLIMbus spec needed by controllers and devices */ +#define SLIM_CL_PER_SUPERFRAME 6144 +#define SLIM_CL_PER_SUPERFRAME_DIV8 (SLIM_CL_PER_SUPERFRAME >> 3) + +/* SLIMbus message types. Related to interpretation of message code. */ +#define SLIM_MSG_MT_CORE 0x0 +#define SLIM_MSG_MT_DEST_REFERRED_USER 0x2 +#define SLIM_MSG_MT_SRC_REFERRED_USER 0x6 + +/* + * SLIM Broadcast header format + * BYTE 0: MT[7:5] RL[4:0] + * BYTE 1: RSVD[7] MC[6:0] + * BYTE 2: RSVD[7:6] DT[5:4] PI[3:0] + */ +#define SLIM_MSG_MT_MASK GENMASK(2, 0) +#define SLIM_MSG_MT_SHIFT 5 +#define SLIM_MSG_RL_MASK GENMASK(4, 0) +#define SLIM_MSG_RL_SHIFT 0 +#define SLIM_MSG_MC_MASK GENMASK(6, 0) +#define SLIM_MSG_MC_SHIFT 0 +#define SLIM_MSG_DT_MASK GENMASK(1, 0) +#define SLIM_MSG_DT_SHIFT 4 + +#define SLIM_HEADER_GET_MT(b) ((b >> SLIM_MSG_MT_SHIFT) & SLIM_MSG_MT_MASK) +#define SLIM_HEADER_GET_RL(b) ((b >> SLIM_MSG_RL_SHIFT) & SLIM_MSG_RL_MASK) +#define SLIM_HEADER_GET_MC(b) ((b >> SLIM_MSG_MC_SHIFT) & SLIM_MSG_MC_MASK) +#define SLIM_HEADER_GET_DT(b) ((b >> SLIM_MSG_DT_SHIFT) & SLIM_MSG_DT_MASK) + +/* Device management messages used by this framework */ +#define SLIM_MSG_MC_REPORT_PRESENT 0x1 +#define SLIM_MSG_MC_ASSIGN_LOGICAL_ADDRESS 0x2 +#define SLIM_MSG_MC_REPORT_ABSENT 0xF + +/* Data channel management messages */ +#define SLIM_MSG_MC_CONNECT_SOURCE 0x10 +#define SLIM_MSG_MC_CONNECT_SINK 0x11 +#define SLIM_MSG_MC_DISCONNECT_PORT 0x14 +#define SLIM_MSG_MC_CHANGE_CONTENT 0x18 + +/* Clock pause Reconfiguration messages */ +#define SLIM_MSG_MC_BEGIN_RECONFIGURATION 0x40 +#define SLIM_MSG_MC_NEXT_PAUSE_CLOCK 0x4A +#define SLIM_MSG_MC_NEXT_DEFINE_CHANNEL 0x50 +#define SLIM_MSG_MC_NEXT_DEFINE_CONTENT 0x51 +#define SLIM_MSG_MC_NEXT_ACTIVATE_CHANNEL 0x54 +#define SLIM_MSG_MC_NEXT_DEACTIVATE_CHANNEL 0x55 +#define SLIM_MSG_MC_NEXT_REMOVE_CHANNEL 0x58 +#define SLIM_MSG_MC_RECONFIGURE_NOW 0x5F + +/* Clock pause values per SLIMbus spec */ +#define SLIM_CLK_FAST 0 +#define SLIM_CLK_CONST_PHASE 1 +#define SLIM_CLK_UNSPECIFIED 2 + +/* Destination type Values */ +#define SLIM_MSG_DEST_LOGICALADDR 0 +#define SLIM_MSG_DEST_ENUMADDR 1 +#define SLIM_MSG_DEST_BROADCAST 3 + +/* Standard values per SLIMbus spec needed by controllers and devices */ +#define SLIM_MAX_CLK_GEAR 10 +#define SLIM_MIN_CLK_GEAR 1 +#define SLIM_SLOT_LEN_BITS 4 + +/* Indicate that the frequency of the flow and the bus frequency are locked */ +#define SLIM_CHANNEL_CONTENT_FL BIT(7) + +/* Standard values per SLIMbus spec needed by controllers and devices */ +#define SLIM_CL_PER_SUPERFRAME 6144 +#define SLIM_SLOTS_PER_SUPERFRAME (SLIM_CL_PER_SUPERFRAME >> 2) +#define SLIM_SL_PER_SUPERFRAME (SLIM_CL_PER_SUPERFRAME >> 2) +/* Manager's logical address is set to 0xFF per spec */ +#define SLIM_LA_MANAGER 0xFF + +#define SLIM_MAX_TIDS 256 +/** + * struct slim_framer - Represents SLIMbus framer. + * Every controller may have multiple framers. There is 1 active framer device + * responsible for clocking the bus. + * Manager is responsible for framer hand-over. + * @dev: Driver model representation of the device. + * @e_addr: Enumeration address of the framer. + * @rootfreq: Root Frequency at which the framer can run. This is maximum + * frequency ('clock gear 10') at which the bus can operate. + * @superfreq: Superframes per root frequency. Every frame is 6144 bits. + */ +struct slim_framer { + struct device dev; + struct slim_eaddr e_addr; + int rootfreq; + int superfreq; +}; + +#define to_slim_framer(d) container_of(d, struct slim_framer, dev) + +/** + * struct slim_msg_txn - Message to be sent by the controller. + * This structure has packet header, + * payload and buffer to be filled (if any) + * @rl: Header field. remaining length. + * @mt: Header field. Message type. + * @mc: Header field. LSB is message code for type mt. + * @dt: Header field. Destination type. + * @ec: Element code. Used for elemental access APIs. + * @tid: Transaction ID. Used for messages expecting response. + * (relevant for message-codes involving read operation) + * @la: Logical address of the device this message is going to. + * (Not used when destination type is broadcast.) + * @msg: Elemental access message to be read/written + * @comp: completion if read/write is synchronous, used internally + * for tid based transactions. + */ +struct slim_msg_txn { + u8 rl; + u8 mt; + u8 mc; + u8 dt; + u16 ec; + u8 tid; + u8 la; + struct slim_val_inf *msg; + struct completion *comp; +}; + +/* Frequently used message transaction structures */ +#define DEFINE_SLIM_LDEST_TXN(name, mc, rl, la, msg) \ + struct slim_msg_txn name = { rl, 0, mc, SLIM_MSG_DEST_LOGICALADDR, 0,\ + 0, la, msg, } + +#define DEFINE_SLIM_BCAST_TXN(name, mc, rl, la, msg) \ + struct slim_msg_txn name = { rl, 0, mc, SLIM_MSG_DEST_BROADCAST, 0,\ + 0, la, msg, } + +#define DEFINE_SLIM_EDEST_TXN(name, mc, rl, la, msg) \ + struct slim_msg_txn name = { rl, 0, mc, SLIM_MSG_DEST_ENUMADDR, 0,\ + 0, la, msg, } +/** + * enum slim_clk_state: SLIMbus controller's clock state used internally for + * maintaining current clock state. + * @SLIM_CLK_ACTIVE: SLIMbus clock is active + * @SLIM_CLK_ENTERING_PAUSE: SLIMbus clock pause sequence is being sent on the + * bus. If this succeeds, state changes to SLIM_CLK_PAUSED. If the + * transition fails, state changes back to SLIM_CLK_ACTIVE + * @SLIM_CLK_PAUSED: SLIMbus controller clock has paused. + */ +enum slim_clk_state { + SLIM_CLK_ACTIVE, + SLIM_CLK_ENTERING_PAUSE, + SLIM_CLK_PAUSED, +}; + +/** + * struct slim_sched: Framework uses this structure internally for scheduling. + * @clk_state: Controller's clock state from enum slim_clk_state + * @pause_comp: Signals completion of clock pause sequence. This is useful when + * client tries to call SLIMbus transaction when controller is entering + * clock pause. + * @m_reconf: This mutex is held until current reconfiguration (data channel + * scheduling, message bandwidth reservation) is done. Message APIs can + * use the bus concurrently when this mutex is held since elemental access + * messages can be sent on the bus when reconfiguration is in progress. + */ +struct slim_sched { + enum slim_clk_state clk_state; + struct completion pause_comp; + struct mutex m_reconf; +}; + +/** + * enum slim_port_direction: SLIMbus port direction + * + * @SLIM_PORT_SINK: SLIMbus port is a sink + * @SLIM_PORT_SOURCE: SLIMbus port is a source + */ +enum slim_port_direction { + SLIM_PORT_SINK = 0, + SLIM_PORT_SOURCE, +}; +/** + * enum slim_port_state: SLIMbus Port/Endpoint state machine + * according to SLIMbus Spec 2.0 + * @SLIM_PORT_DISCONNECTED: SLIMbus port is disconnected + * entered from Unconfigure/configured state after + * DISCONNECT_PORT or REMOVE_CHANNEL core command + * @SLIM_PORT_UNCONFIGURED: SLIMbus port is in unconfigured state. + * entered from disconnect state after CONNECT_SOURCE/SINK core command + * @SLIM_PORT_CONFIGURED: SLIMbus port is in configured state. + * entered from unconfigured state after DEFINE_CHANNEL, DEFINE_CONTENT + * and ACTIVATE_CHANNEL core commands. Ready for data transmission. + */ +enum slim_port_state { + SLIM_PORT_DISCONNECTED = 0, + SLIM_PORT_UNCONFIGURED, + SLIM_PORT_CONFIGURED, +}; + +/** + * enum slim_channel_state: SLIMbus channel state machine used by core. + * @SLIM_CH_STATE_DISCONNECTED: SLIMbus channel is disconnected + * @SLIM_CH_STATE_ALLOCATED: SLIMbus channel is allocated + * @SLIM_CH_STATE_ASSOCIATED: SLIMbus channel is associated with port + * @SLIM_CH_STATE_DEFINED: SLIMbus channel parameters are defined + * @SLIM_CH_STATE_CONTENT_DEFINED: SLIMbus channel content is defined + * @SLIM_CH_STATE_ACTIVE: SLIMbus channel is active and ready for data + * @SLIM_CH_STATE_REMOVED: SLIMbus channel is inactive and removed + */ +enum slim_channel_state { + SLIM_CH_STATE_DISCONNECTED = 0, + SLIM_CH_STATE_ALLOCATED, + SLIM_CH_STATE_ASSOCIATED, + SLIM_CH_STATE_DEFINED, + SLIM_CH_STATE_CONTENT_DEFINED, + SLIM_CH_STATE_ACTIVE, + SLIM_CH_STATE_REMOVED, +}; + +/** + * enum slim_ch_data_fmt: SLIMbus channel data Type identifiers according to + * Table 60 of SLIMbus Spec 1.01.01 + * @SLIM_CH_DATA_FMT_NOT_DEFINED: Undefined + * @SLIM_CH_DATA_FMT_LPCM_AUDIO: LPCM audio + * @SLIM_CH_DATA_FMT_IEC61937_COMP_AUDIO: IEC61937 Compressed audio + * @SLIM_CH_DATA_FMT_PACKED_PDM_AUDIO: Packed PDM audio + */ +enum slim_ch_data_fmt { + SLIM_CH_DATA_FMT_NOT_DEFINED = 0, + SLIM_CH_DATA_FMT_LPCM_AUDIO = 1, + SLIM_CH_DATA_FMT_IEC61937_COMP_AUDIO = 2, + SLIM_CH_DATA_FMT_PACKED_PDM_AUDIO = 3, +}; + +/** + * enum slim_ch_aux_fmt: SLIMbus channel Aux Field format IDs according to + * Table 63 of SLIMbus Spec 2.0 + * @SLIM_CH_AUX_FMT_NOT_APPLICABLE: Undefined + * @SLIM_CH_AUX_FMT_ZCUV_TUNNEL_IEC60958: ZCUV for tunneling IEC60958 + * @SLIM_CH_AUX_FMT_USER_DEFINED: User defined + */ +enum slim_ch_aux_bit_fmt { + SLIM_CH_AUX_FMT_NOT_APPLICABLE = 0, + SLIM_CH_AUX_FMT_ZCUV_TUNNEL_IEC60958 = 1, + SLIM_CH_AUX_FMT_USER_DEFINED = 0xF, +}; + +/** + * struct slim_channel - SLIMbus channel, used for state machine + * + * @id: ID of channel + * @prrate: Presense rate of channel from Table 66 of SLIMbus 2.0 Specs + * @seg_dist: segment distribution code from Table 20 of SLIMbus 2.0 Specs + * @data_fmt: Data format of channel. + * @aux_fmt: Aux format for this channel. + * @state: channel state machine + */ +struct slim_channel { + int id; + int prrate; + int seg_dist; + enum slim_ch_data_fmt data_fmt; + enum slim_ch_aux_bit_fmt aux_fmt; + enum slim_channel_state state; +}; + +/** + * struct slim_port - SLIMbus port + * + * @id: Port id + * @direction: Port direction, Source or Sink. + * @state: state machine of port. + * @ch: channel associated with this port. + */ +struct slim_port { + int id; + enum slim_port_direction direction; + enum slim_port_state state; + struct slim_channel ch; +}; + +/** + * enum slim_transport_protocol: SLIMbus Transport protocol list from + * Table 47 of SLIMbus 2.0 specs. + * @SLIM_PROTO_ISO: Isochronous Protocol, no flow control as data rate match + * channel rate flow control embedded in the data. + * @SLIM_PROTO_PUSH: Pushed Protocol, includes flow control, Used to carry + * data whose rate is equal to, or lower than the channel rate. + * @SLIM_PROTO_PULL: Pulled Protocol, similar usage as pushed protocol + * but pull is a unicast. + * @SLIM_PROTO_LOCKED: Locked Protocol + * @SLIM_PROTO_ASYNC_SMPLX: Asynchronous Protocol-Simplex + * @SLIM_PROTO_ASYNC_HALF_DUP: Asynchronous Protocol-Half-duplex + * @SLIM_PROTO_EXT_SMPLX: Extended Asynchronous Protocol-Simplex + * @SLIM_PROTO_EXT_HALF_DUP: Extended Asynchronous Protocol-Half-duplex + */ +enum slim_transport_protocol { + SLIM_PROTO_ISO = 0, + SLIM_PROTO_PUSH, + SLIM_PROTO_PULL, + SLIM_PROTO_LOCKED, + SLIM_PROTO_ASYNC_SMPLX, + SLIM_PROTO_ASYNC_HALF_DUP, + SLIM_PROTO_EXT_SMPLX, + SLIM_PROTO_EXT_HALF_DUP, +}; + +/** + * struct slim_stream_runtime - SLIMbus stream runtime instance + * + * @name: Name of the stream + * @dev: SLIM Device instance associated with this stream + * @direction: direction of stream + * @prot: Transport protocol used in this stream + * @rate: Data rate of samples * + * @bps: bits per sample + * @ratem: rate multipler which is super frame rate/data rate + * @num_ports: number of ports + * @ports: pointer to instance of ports + * @node: list head for stream associated with slim device. + */ +struct slim_stream_runtime { + const char *name; + struct slim_device *dev; + int direction; + enum slim_transport_protocol prot; + unsigned int rate; + unsigned int bps; + unsigned int ratem; + int num_ports; + struct slim_port *ports; + struct list_head node; +}; + +/** + * struct slim_controller - Controls every instance of SLIMbus + * (similar to 'master' on SPI) + * @dev: Device interface to this driver + * @id: Board-specific number identifier for this controller/bus + * @name: Name for this controller + * @min_cg: Minimum clock gear supported by this controller (default value: 1) + * @max_cg: Maximum clock gear supported by this controller (default value: 10) + * @clkgear: Current clock gear in which this bus is running + * @laddr_ida: logical address id allocator + * @a_framer: Active framer which is clocking the bus managed by this controller + * @lock: Mutex protecting controller data structures + * @devices: Slim device list + * @tid_idr: tid id allocator + * @txn_lock: Lock to protect table of transactions + * @sched: scheduler structure used by the controller + * @xfer_msg: Transfer a message on this controller (this can be a broadcast + * control/status message like data channel setup, or a unicast message + * like value element read/write. + * @set_laddr: Setup logical address at laddr for the slave with elemental + * address e_addr. Drivers implementing controller will be expected to + * send unicast message to this device with its logical address. + * @get_laddr: It is possible that controller needs to set fixed logical + * address table and get_laddr can be used in that case so that controller + * can do this assignment. Use case is when the master is on the remote + * processor side, who is resposible for allocating laddr. + * @wakeup: This function pointer implements controller-specific procedure + * to wake it up from clock-pause. Framework will call this to bring + * the controller out of clock pause. + * @enable_stream: This function pointer implements controller-specific procedure + * to enable a stream. + * @disable_stream: This function pointer implements controller-specific procedure + * to disable stream. + * + * 'Manager device' is responsible for device management, bandwidth + * allocation, channel setup, and port associations per channel. + * Device management means Logical address assignment/removal based on + * enumeration (report-present, report-absent) of a device. + * Bandwidth allocation is done dynamically by the manager based on active + * channels on the bus, message-bandwidth requests made by SLIMbus devices. + * Based on current bandwidth usage, manager chooses a frequency to run + * the bus at (in steps of 'clock-gear', 1 through 10, each clock gear + * representing twice the frequency than the previous gear). + * Manager is also responsible for entering (and exiting) low-power-mode + * (known as 'clock pause'). + * Manager can do handover of framer if there are multiple framers on the + * bus and a certain usecase warrants using certain framer to avoid keeping + * previous framer being powered-on. + * + * Controller here performs duties of the manager device, and 'interface + * device'. Interface device is responsible for monitoring the bus and + * reporting information such as loss-of-synchronization, data + * slot-collision. + */ +struct slim_controller { + struct device *dev; + unsigned int id; + char name[SLIMBUS_NAME_SIZE]; + int min_cg; + int max_cg; + int clkgear; + struct ida laddr_ida; + struct slim_framer *a_framer; + struct mutex lock; + struct list_head devices; + struct idr tid_idr; + spinlock_t txn_lock; + struct slim_sched sched; + int (*xfer_msg)(struct slim_controller *ctrl, + struct slim_msg_txn *tx); + int (*set_laddr)(struct slim_controller *ctrl, + struct slim_eaddr *ea, u8 laddr); + int (*get_laddr)(struct slim_controller *ctrl, + struct slim_eaddr *ea, u8 *laddr); + int (*enable_stream)(struct slim_stream_runtime *rt); + int (*disable_stream)(struct slim_stream_runtime *rt); + int (*wakeup)(struct slim_controller *ctrl); +}; + +int slim_device_report_present(struct slim_controller *ctrl, + struct slim_eaddr *e_addr, u8 *laddr); +void slim_report_absent(struct slim_device *sbdev); +int slim_register_controller(struct slim_controller *ctrl); +int slim_unregister_controller(struct slim_controller *ctrl); +void slim_msg_response(struct slim_controller *ctrl, u8 *reply, u8 tid, u8 l); +int slim_do_transfer(struct slim_controller *ctrl, struct slim_msg_txn *txn); +int slim_ctrl_clk_pause(struct slim_controller *ctrl, bool wakeup, u8 restart); +int slim_alloc_txn_tid(struct slim_controller *ctrl, struct slim_msg_txn *txn); +void slim_free_txn_tid(struct slim_controller *ctrl, struct slim_msg_txn *txn); + +static inline bool slim_tid_txn(u8 mt, u8 mc) +{ + return (mt == SLIM_MSG_MT_CORE && + (mc == SLIM_MSG_MC_REQUEST_INFORMATION || + mc == SLIM_MSG_MC_REQUEST_CLEAR_INFORMATION || + mc == SLIM_MSG_MC_REQUEST_VALUE || + mc == SLIM_MSG_MC_REQUEST_CHANGE_VALUE)); +} + +static inline bool slim_ec_txn(u8 mt, u8 mc) +{ + return (mt == SLIM_MSG_MT_CORE && + ((mc >= SLIM_MSG_MC_REQUEST_INFORMATION && + mc <= SLIM_MSG_MC_REPORT_INFORMATION) || + (mc >= SLIM_MSG_MC_REQUEST_VALUE && + mc <= SLIM_MSG_MC_CHANGE_VALUE))); +} +#endif /* _LINUX_SLIMBUS_H */ diff --git a/drivers/slimbus/stream.c b/drivers/slimbus/stream.c new file mode 100644 index 000000000..73a2aa362 --- /dev/null +++ b/drivers/slimbus/stream.c @@ -0,0 +1,477 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018, Linaro Limited + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/list.h> +#include <linux/slimbus.h> +#include <uapi/sound/asound.h> +#include "slimbus.h" + +/** + * struct segdist_code - Segment Distributions code from + * Table 20 of SLIMbus Specs Version 2.0 + * + * @ratem: Channel Rate Multipler(Segments per Superframe) + * @seg_interval: Number of slots between the first Slot of Segment + * and the first slot of the next consecutive Segment. + * @segdist_code: Segment Distribution Code SD[11:0] + * @seg_offset_mask: Segment offset mask in SD[11:0] + * @segdist_codes: List of all possible Segmet Distribution codes. + */ +static const struct segdist_code { + int ratem; + int seg_interval; + int segdist_code; + u32 seg_offset_mask; + +} segdist_codes[] = { + {1, 1536, 0x200, 0xdff}, + {2, 768, 0x100, 0xcff}, + {4, 384, 0x080, 0xc7f}, + {8, 192, 0x040, 0xc3f}, + {16, 96, 0x020, 0xc1f}, + {32, 48, 0x010, 0xc0f}, + {64, 24, 0x008, 0xc07}, + {128, 12, 0x004, 0xc03}, + {256, 6, 0x002, 0xc01}, + {512, 3, 0x001, 0xc00}, + {3, 512, 0xe00, 0x1ff}, + {6, 256, 0xd00, 0x0ff}, + {12, 128, 0xc80, 0x07f}, + {24, 64, 0xc40, 0x03f}, + {48, 32, 0xc20, 0x01f}, + {96, 16, 0xc10, 0x00f}, + {192, 8, 0xc08, 0x007}, + {364, 4, 0xc04, 0x003}, + {768, 2, 0xc02, 0x001}, +}; + +/* + * Presence Rate table for all Natural Frequencies + * The Presence rate of a constant bitrate stream is mean flow rate of the + * stream expressed in occupied Segments of that Data Channel per second. + * Table 66 from SLIMbus 2.0 Specs + * + * Index of the table corresponds to Presence rate code for the respective rate + * in the table. + */ +static const int slim_presence_rate_table[] = { + 0, /* Not Indicated */ + 12000, + 24000, + 48000, + 96000, + 192000, + 384000, + 768000, + 0, /* Reserved */ + 11025, + 22050, + 44100, + 88200, + 176400, + 352800, + 705600, + 4000, + 8000, + 16000, + 32000, + 64000, + 128000, + 256000, + 512000, +}; + +/** + * slim_stream_allocate() - Allocate a new SLIMbus Stream + * @dev:Slim device to be associated with + * @name: name of the stream + * + * This is very first call for SLIMbus streaming, this API will allocate + * a new SLIMbus stream and return a valid stream runtime pointer for client + * to use it in subsequent stream apis. state of stream is set to ALLOCATED + * + * Return: valid pointer on success and error code on failure. + * From ASoC DPCM framework, this state is linked to startup() operation. + */ +struct slim_stream_runtime *slim_stream_allocate(struct slim_device *dev, + const char *name) +{ + struct slim_stream_runtime *rt; + + rt = kzalloc(sizeof(*rt), GFP_KERNEL); + if (!rt) + return ERR_PTR(-ENOMEM); + + rt->name = kasprintf(GFP_KERNEL, "slim-%s", name); + if (!rt->name) { + kfree(rt); + return ERR_PTR(-ENOMEM); + } + + rt->dev = dev; + spin_lock(&dev->stream_list_lock); + list_add_tail(&rt->node, &dev->stream_list); + spin_unlock(&dev->stream_list_lock); + + return rt; +} +EXPORT_SYMBOL_GPL(slim_stream_allocate); + +static int slim_connect_port_channel(struct slim_stream_runtime *stream, + struct slim_port *port) +{ + struct slim_device *sdev = stream->dev; + u8 wbuf[2]; + struct slim_val_inf msg = {0, 2, NULL, wbuf, NULL}; + u8 mc = SLIM_MSG_MC_CONNECT_SOURCE; + DEFINE_SLIM_LDEST_TXN(txn, mc, 6, stream->dev->laddr, &msg); + + if (port->direction == SLIM_PORT_SINK) + txn.mc = SLIM_MSG_MC_CONNECT_SINK; + + wbuf[0] = port->id; + wbuf[1] = port->ch.id; + port->ch.state = SLIM_CH_STATE_ASSOCIATED; + port->state = SLIM_PORT_UNCONFIGURED; + + return slim_do_transfer(sdev->ctrl, &txn); +} + +static int slim_disconnect_port(struct slim_stream_runtime *stream, + struct slim_port *port) +{ + struct slim_device *sdev = stream->dev; + u8 wbuf[1]; + struct slim_val_inf msg = {0, 1, NULL, wbuf, NULL}; + u8 mc = SLIM_MSG_MC_DISCONNECT_PORT; + DEFINE_SLIM_LDEST_TXN(txn, mc, 5, stream->dev->laddr, &msg); + + wbuf[0] = port->id; + port->ch.state = SLIM_CH_STATE_DISCONNECTED; + port->state = SLIM_PORT_DISCONNECTED; + + return slim_do_transfer(sdev->ctrl, &txn); +} + +static int slim_deactivate_remove_channel(struct slim_stream_runtime *stream, + struct slim_port *port) +{ + struct slim_device *sdev = stream->dev; + u8 wbuf[1]; + struct slim_val_inf msg = {0, 1, NULL, wbuf, NULL}; + u8 mc = SLIM_MSG_MC_NEXT_DEACTIVATE_CHANNEL; + DEFINE_SLIM_LDEST_TXN(txn, mc, 5, stream->dev->laddr, &msg); + int ret; + + wbuf[0] = port->ch.id; + ret = slim_do_transfer(sdev->ctrl, &txn); + if (ret) + return ret; + + txn.mc = SLIM_MSG_MC_NEXT_REMOVE_CHANNEL; + port->ch.state = SLIM_CH_STATE_REMOVED; + + return slim_do_transfer(sdev->ctrl, &txn); +} + +static int slim_get_prate_code(int rate) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(slim_presence_rate_table); i++) { + if (rate == slim_presence_rate_table[i]) + return i; + } + + return -EINVAL; +} + +/** + * slim_stream_prepare() - Prepare a SLIMbus Stream + * + * @rt: instance of slim stream runtime to configure + * @cfg: new configuration for the stream + * + * This API will configure SLIMbus stream with config parameters from cfg. + * return zero on success and error code on failure. From ASoC DPCM framework, + * this state is linked to hw_params() operation. + */ +int slim_stream_prepare(struct slim_stream_runtime *rt, + struct slim_stream_config *cfg) +{ + struct slim_controller *ctrl = rt->dev->ctrl; + struct slim_port *port; + int num_ports, i, port_id; + + if (rt->ports) { + dev_err(&rt->dev->dev, "Stream already Prepared\n"); + return -EINVAL; + } + + num_ports = hweight32(cfg->port_mask); + rt->ports = kcalloc(num_ports, sizeof(*port), GFP_KERNEL); + if (!rt->ports) + return -ENOMEM; + + rt->num_ports = num_ports; + rt->rate = cfg->rate; + rt->bps = cfg->bps; + rt->direction = cfg->direction; + + if (cfg->rate % ctrl->a_framer->superfreq) { + /* + * data rate not exactly multiple of super frame, + * use PUSH/PULL protocol + */ + if (cfg->direction == SNDRV_PCM_STREAM_PLAYBACK) + rt->prot = SLIM_PROTO_PUSH; + else + rt->prot = SLIM_PROTO_PULL; + } else { + rt->prot = SLIM_PROTO_ISO; + } + + rt->ratem = cfg->rate/ctrl->a_framer->superfreq; + + i = 0; + for_each_set_bit(port_id, &cfg->port_mask, SLIM_DEVICE_MAX_PORTS) { + port = &rt->ports[i]; + port->state = SLIM_PORT_DISCONNECTED; + port->id = port_id; + port->ch.prrate = slim_get_prate_code(cfg->rate); + port->ch.id = cfg->chs[i]; + port->ch.data_fmt = SLIM_CH_DATA_FMT_NOT_DEFINED; + port->ch.aux_fmt = SLIM_CH_AUX_FMT_NOT_APPLICABLE; + port->ch.state = SLIM_CH_STATE_ALLOCATED; + + if (cfg->direction == SNDRV_PCM_STREAM_PLAYBACK) + port->direction = SLIM_PORT_SINK; + else + port->direction = SLIM_PORT_SOURCE; + + slim_connect_port_channel(rt, port); + i++; + } + + return 0; +} +EXPORT_SYMBOL_GPL(slim_stream_prepare); + +static int slim_define_channel_content(struct slim_stream_runtime *stream, + struct slim_port *port) +{ + struct slim_device *sdev = stream->dev; + u8 wbuf[4]; + struct slim_val_inf msg = {0, 4, NULL, wbuf, NULL}; + u8 mc = SLIM_MSG_MC_NEXT_DEFINE_CONTENT; + DEFINE_SLIM_LDEST_TXN(txn, mc, 8, stream->dev->laddr, &msg); + + wbuf[0] = port->ch.id; + wbuf[1] = port->ch.prrate; + + /* Frequency Locked for ISO Protocol */ + if (stream->prot != SLIM_PROTO_ISO) + wbuf[1] |= SLIM_CHANNEL_CONTENT_FL; + + wbuf[2] = port->ch.data_fmt | (port->ch.aux_fmt << 4); + wbuf[3] = stream->bps/SLIM_SLOT_LEN_BITS; + port->ch.state = SLIM_CH_STATE_CONTENT_DEFINED; + + return slim_do_transfer(sdev->ctrl, &txn); +} + +static int slim_get_segdist_code(int ratem) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(segdist_codes); i++) { + if (segdist_codes[i].ratem == ratem) + return segdist_codes[i].segdist_code; + } + + return -EINVAL; +} + +static int slim_define_channel(struct slim_stream_runtime *stream, + struct slim_port *port) +{ + struct slim_device *sdev = stream->dev; + u8 wbuf[4]; + struct slim_val_inf msg = {0, 4, NULL, wbuf, NULL}; + u8 mc = SLIM_MSG_MC_NEXT_DEFINE_CHANNEL; + DEFINE_SLIM_LDEST_TXN(txn, mc, 8, stream->dev->laddr, &msg); + + port->ch.seg_dist = slim_get_segdist_code(stream->ratem); + + wbuf[0] = port->ch.id; + wbuf[1] = port->ch.seg_dist & 0xFF; + wbuf[2] = (stream->prot << 4) | ((port->ch.seg_dist & 0xF00) >> 8); + if (stream->prot == SLIM_PROTO_ISO) + wbuf[3] = stream->bps/SLIM_SLOT_LEN_BITS; + else + wbuf[3] = stream->bps/SLIM_SLOT_LEN_BITS + 1; + + port->ch.state = SLIM_CH_STATE_DEFINED; + + return slim_do_transfer(sdev->ctrl, &txn); +} + +static int slim_activate_channel(struct slim_stream_runtime *stream, + struct slim_port *port) +{ + struct slim_device *sdev = stream->dev; + u8 wbuf[1]; + struct slim_val_inf msg = {0, 1, NULL, wbuf, NULL}; + u8 mc = SLIM_MSG_MC_NEXT_ACTIVATE_CHANNEL; + DEFINE_SLIM_LDEST_TXN(txn, mc, 5, stream->dev->laddr, &msg); + + txn.msg->num_bytes = 1; + txn.msg->wbuf = wbuf; + wbuf[0] = port->ch.id; + port->ch.state = SLIM_CH_STATE_ACTIVE; + + return slim_do_transfer(sdev->ctrl, &txn); +} + +/** + * slim_stream_enable() - Enable a prepared SLIMbus Stream + * + * @stream: instance of slim stream runtime to enable + * + * This API will enable all the ports and channels associated with + * SLIMbus stream + * + * Return: zero on success and error code on failure. From ASoC DPCM framework, + * this state is linked to trigger() start operation. + */ +int slim_stream_enable(struct slim_stream_runtime *stream) +{ + DEFINE_SLIM_BCAST_TXN(txn, SLIM_MSG_MC_BEGIN_RECONFIGURATION, + 3, SLIM_LA_MANAGER, NULL); + struct slim_controller *ctrl = stream->dev->ctrl; + int ret, i; + + if (ctrl->enable_stream) { + ret = ctrl->enable_stream(stream); + if (ret) + return ret; + + for (i = 0; i < stream->num_ports; i++) + stream->ports[i].ch.state = SLIM_CH_STATE_ACTIVE; + + return ret; + } + + ret = slim_do_transfer(ctrl, &txn); + if (ret) + return ret; + + /* define channels first before activating them */ + for (i = 0; i < stream->num_ports; i++) { + struct slim_port *port = &stream->ports[i]; + + slim_define_channel(stream, port); + slim_define_channel_content(stream, port); + } + + for (i = 0; i < stream->num_ports; i++) { + struct slim_port *port = &stream->ports[i]; + + slim_activate_channel(stream, port); + port->state = SLIM_PORT_CONFIGURED; + } + txn.mc = SLIM_MSG_MC_RECONFIGURE_NOW; + + return slim_do_transfer(ctrl, &txn); +} +EXPORT_SYMBOL_GPL(slim_stream_enable); + +/** + * slim_stream_disable() - Disable a SLIMbus Stream + * + * @stream: instance of slim stream runtime to disable + * + * This API will disable all the ports and channels associated with + * SLIMbus stream + * + * Return: zero on success and error code on failure. From ASoC DPCM framework, + * this state is linked to trigger() pause operation. + */ +int slim_stream_disable(struct slim_stream_runtime *stream) +{ + DEFINE_SLIM_BCAST_TXN(txn, SLIM_MSG_MC_BEGIN_RECONFIGURATION, + 3, SLIM_LA_MANAGER, NULL); + struct slim_controller *ctrl = stream->dev->ctrl; + int ret, i; + + if (ctrl->disable_stream) + ctrl->disable_stream(stream); + + ret = slim_do_transfer(ctrl, &txn); + if (ret) + return ret; + + for (i = 0; i < stream->num_ports; i++) + slim_deactivate_remove_channel(stream, &stream->ports[i]); + + txn.mc = SLIM_MSG_MC_RECONFIGURE_NOW; + + return slim_do_transfer(ctrl, &txn); +} +EXPORT_SYMBOL_GPL(slim_stream_disable); + +/** + * slim_stream_unprepare() - Un-prepare a SLIMbus Stream + * + * @stream: instance of slim stream runtime to unprepare + * + * This API will un allocate all the ports and channels associated with + * SLIMbus stream + * + * Return: zero on success and error code on failure. From ASoC DPCM framework, + * this state is linked to trigger() stop operation. + */ +int slim_stream_unprepare(struct slim_stream_runtime *stream) +{ + int i; + + for (i = 0; i < stream->num_ports; i++) + slim_disconnect_port(stream, &stream->ports[i]); + + kfree(stream->ports); + stream->ports = NULL; + stream->num_ports = 0; + + return 0; +} +EXPORT_SYMBOL_GPL(slim_stream_unprepare); + +/** + * slim_stream_free() - Free a SLIMbus Stream + * + * @stream: instance of slim stream runtime to free + * + * This API will un allocate all the memory associated with + * slim stream runtime, user is not allowed to make an dereference + * to stream after this call. + * + * Return: zero on success and error code on failure. From ASoC DPCM framework, + * this state is linked to shutdown() operation. + */ +int slim_stream_free(struct slim_stream_runtime *stream) +{ + struct slim_device *sdev = stream->dev; + + spin_lock(&sdev->stream_list_lock); + list_del(&stream->node); + spin_unlock(&sdev->stream_list_lock); + + kfree(stream->name); + kfree(stream); + + return 0; +} +EXPORT_SYMBOL_GPL(slim_stream_free); |