diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/soc/bcm/brcmstb/pm/s2-mips.S | 192 |
1 files changed, 192 insertions, 0 deletions
diff --git a/drivers/soc/bcm/brcmstb/pm/s2-mips.S b/drivers/soc/bcm/brcmstb/pm/s2-mips.S new file mode 100644 index 000000000..2a26a94eb --- /dev/null +++ b/drivers/soc/bcm/brcmstb/pm/s2-mips.S @@ -0,0 +1,192 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2016 Broadcom Corporation + */ + +#include <asm/asm.h> +#include <asm/regdef.h> +#include <asm/mipsregs.h> +#include <asm/stackframe.h> + +#include "pm.h" + + .text + .set noreorder + .align 5 + +/* + * a0: u32 params array + */ +LEAF(brcm_pm_do_s2) + + subu sp, 64 + sw ra, 0(sp) + sw s0, 4(sp) + sw s1, 8(sp) + sw s2, 12(sp) + sw s3, 16(sp) + sw s4, 20(sp) + sw s5, 24(sp) + sw s6, 28(sp) + sw s7, 32(sp) + + /* + * Dereference the params array + * s0: AON_CTRL base register + * s1: DDR_PHY base register + * s2: TIMERS base register + * s3: I-Cache line size + * s4: Restart vector address + * s5: Restart vector size + */ + move t0, a0 + + lw s0, 0(t0) + lw s1, 4(t0) + lw s2, 8(t0) + lw s3, 12(t0) + lw s4, 16(t0) + lw s5, 20(t0) + + /* Lock this asm section into the I-cache */ + addiu t1, s3, -1 + not t1 + + la t0, brcm_pm_do_s2 + and t0, t1 + + la t2, asm_end + and t2, t1 + +1: cache 0x1c, 0(t0) + bne t0, t2, 1b + addu t0, s3 + + /* Lock the interrupt vector into the I-cache */ + move t0, zero + +2: move t1, s4 + cache 0x1c, 0(t1) + addu t1, s3 + addu t0, s3 + ble t0, s5, 2b + nop + + sync + + /* Power down request */ + li t0, PM_S2_COMMAND + sw zero, AON_CTRL_PM_CTRL(s0) + lw zero, AON_CTRL_PM_CTRL(s0) + sw t0, AON_CTRL_PM_CTRL(s0) + lw t0, AON_CTRL_PM_CTRL(s0) + + /* Enable CP0 interrupt 2 and wait for interrupt */ + mfc0 t0, CP0_STATUS + /* Save cp0 sr for restoring later */ + move s6, t0 + + li t1, ~(ST0_IM | ST0_IE) + and t0, t1 + ori t0, STATUSF_IP2 + mtc0 t0, CP0_STATUS + nop + nop + nop + ori t0, ST0_IE + mtc0 t0, CP0_STATUS + + /* Wait for interrupt */ + wait + nop + + /* Wait for memc0 */ +1: lw t0, DDR40_PHY_CONTROL_REGS_0_PLL_STATUS(s1) + andi t0, 1 + beqz t0, 1b + nop + + /* 1ms delay needed for stable recovery */ + /* Use TIMER1 to count 1 ms */ + li t0, RESET_TIMER + sw t0, TIMER_TIMER1_CTRL(s2) + lw t0, TIMER_TIMER1_CTRL(s2) + + li t0, START_TIMER + sw t0, TIMER_TIMER1_CTRL(s2) + lw t0, TIMER_TIMER1_CTRL(s2) + + /* Prepare delay */ + li t0, TIMER_MASK + lw t1, TIMER_TIMER1_STAT(s2) + and t1, t0 + /* 1ms delay */ + addi t1, 27000 + + /* Wait for the timer value to exceed t1 */ +1: lw t0, TIMER_TIMER1_STAT(s2) + sgtu t2, t1, t0 + bnez t2, 1b + nop + + /* Power back up */ + li t1, 1 + sw t1, AON_CTRL_HOST_MISC_CMDS(s0) + lw t1, AON_CTRL_HOST_MISC_CMDS(s0) + + sw zero, AON_CTRL_PM_CTRL(s0) + lw zero, AON_CTRL_PM_CTRL(s0) + + /* Unlock I-cache */ + addiu t1, s3, -1 + not t1 + + la t0, brcm_pm_do_s2 + and t0, t1 + + la t2, asm_end + and t2, t1 + +1: cache 0x00, 0(t0) + bne t0, t2, 1b + addu t0, s3 + + /* Unlock interrupt vector */ + move t0, zero + +2: move t1, s4 + cache 0x00, 0(t1) + addu t1, s3 + addu t0, s3 + ble t0, s5, 2b + nop + + /* Restore cp0 sr */ + sync + nop + mtc0 s6, CP0_STATUS + nop + + /* Set return value to success */ + li v0, 0 + + /* Return to caller */ + lw s7, 32(sp) + lw s6, 28(sp) + lw s5, 24(sp) + lw s4, 20(sp) + lw s3, 16(sp) + lw s2, 12(sp) + lw s1, 8(sp) + lw s0, 4(sp) + lw ra, 0(sp) + addiu sp, 64 + + jr ra + nop +END(brcm_pm_do_s2) + + .globl asm_end +asm_end: + nop + |