diff options
Diffstat (limited to 'drivers/soc/ti/Kconfig')
| -rw-r--r-- | drivers/soc/ti/Kconfig | 121 |
1 files changed, 121 insertions, 0 deletions
diff --git a/drivers/soc/ti/Kconfig b/drivers/soc/ti/Kconfig new file mode 100644 index 000000000..f5b82ffa6 --- /dev/null +++ b/drivers/soc/ti/Kconfig @@ -0,0 +1,121 @@ +# SPDX-License-Identifier: GPL-2.0-only +# 64-bit ARM SoCs from TI +if ARM64 + +if ARCH_K3 + +config ARCH_K3_AM6_SOC + bool "K3 AM6 SoC" + help + Enable support for TI's AM6 SoC Family support + +config ARCH_K3_J721E_SOC + bool "K3 J721E SoC" + help + Enable support for TI's J721E SoC Family support + +endif + +endif + +# +# TI SOC drivers +# +menuconfig SOC_TI + bool "TI SOC drivers support" + +if SOC_TI + +config KEYSTONE_NAVIGATOR_QMSS + tristate "Keystone Queue Manager Sub System" + depends on ARCH_KEYSTONE + help + Say y here to support the Keystone multicore Navigator Queue + Manager support. The Queue Manager is a hardware module that + is responsible for accelerating management of the packet queues. + Packets are queued/de-queued by writing/reading descriptor address + to a particular memory mapped location in the Queue Manager module. + + If unsure, say N. + +config KEYSTONE_NAVIGATOR_DMA + tristate "TI Keystone Navigator Packet DMA support" + depends on ARCH_KEYSTONE + help + Say y tp enable support for the Keystone Navigator Packet DMA on + on Keystone family of devices. It sets up the dma channels for the + Queue Manager Sub System. + + If unsure, say N. + +config AMX3_PM + tristate "AMx3 Power Management" + depends on SOC_AM33XX || SOC_AM43XX + depends on WKUP_M3_IPC && TI_EMIF_SRAM && SRAM && RTC_DRV_OMAP + help + Enable power management on AM335x and AM437x. Required for suspend to mem + and standby states on both AM335x and AM437x platforms and for deeper cpuidle + c-states on AM335x. Also required for rtc and ddr in self-refresh low + power mode on AM437x platforms. + +config WKUP_M3_IPC + tristate "TI AMx3 Wkup-M3 IPC Driver" + depends on WKUP_M3_RPROC + depends on OMAP2PLUS_MBOX + help + TI AM33XX and AM43XX have a Cortex M3, the Wakeup M3, to handle + low power transitions. This IPC driver provides the necessary API + to communicate and use the Wakeup M3 for PM features like suspend + resume and boots it using wkup_m3_rproc driver. + +config TI_SCI_PM_DOMAINS + tristate "TI SCI PM Domains Driver" + depends on TI_SCI_PROTOCOL + depends on PM_GENERIC_DOMAINS + help + Generic power domain implementation for TI device implementing + the TI SCI protocol. + + To compile this as a module, choose M here. The module will be + called ti_sci_pm_domains. Note this is needed early in boot before + rootfs may be available. + +config TI_K3_RINGACC + bool "K3 Ring accelerator Sub System" + depends on ARCH_K3 || COMPILE_TEST + depends on TI_SCI_INTA_IRQCHIP + help + Say y here to support the K3 Ring accelerator module. + The Ring Accelerator (RINGACC or RA) provides hardware acceleration + to enable straightforward passing of work between a producer + and a consumer. There is one RINGACC module per NAVSS on TI AM65x SoCs + If unsure, say N. + +config TI_K3_SOCINFO + bool + depends on ARCH_K3 || COMPILE_TEST + select SOC_BUS + select MFD_SYSCON + help + Include support for the SoC bus socinfo for the TI K3 Multicore SoC + platforms to provide information about the SoC family and + variant to user space. + +config TI_PRUSS + tristate "TI PRU-ICSS Subsystem Platform drivers" + depends on SOC_AM33XX || SOC_AM43XX || SOC_DRA7XX || ARCH_KEYSTONE || ARCH_K3 + select MFD_SYSCON + help + TI PRU-ICSS Subsystem platform specific support. + + Say Y or M here to support the Programmable Realtime Unit (PRU) + processors on various TI SoCs. It's safe to say N here if you're + not interested in the PRU or if you are unsure. + +endif # SOC_TI + +config TI_SCI_INTA_MSI_DOMAIN + bool + select GENERIC_MSI_IRQ_DOMAIN + help + Driver to enable Interrupt Aggregator specific MSI Domain. |