diff options
Diffstat (limited to 'drivers/tty/serial/max310x.c')
| -rw-r--r-- | drivers/tty/serial/max310x.c | 404 |
1 files changed, 297 insertions, 107 deletions
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index 5bf8dd619..363b68555 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -14,9 +14,10 @@ #include <linux/delay.h> #include <linux/device.h> #include <linux/gpio/driver.h> +#include <linux/i2c.h> #include <linux/module.h> -#include <linux/of.h> -#include <linux/of_device.h> +#include <linux/mod_devicetable.h> +#include <linux/property.h> #include <linux/regmap.h> #include <linux/serial_core.h> #include <linux/serial.h> @@ -72,7 +73,8 @@ #define MAX310X_GLOBALCMD_REG MAX310X_REG_1F /* Global Command (WO) */ /* Extended registers */ -#define MAX310X_REVID_EXTREG MAX310X_REG_05 /* Revision ID */ +#define MAX310X_SPI_REVID_EXTREG MAX310X_REG_05 /* Revision ID */ +#define MAX310X_I2C_REVID_EXTREG (0x25) /* Revision ID */ /* IRQ register bits */ #define MAX310X_IRQ_LSR_BIT (1 << 0) /* LSR interrupt */ @@ -235,6 +237,14 @@ #define MAX310x_REV_MASK (0xf8) #define MAX310X_WRITE_BIT 0x80 +/* Port startup definitions */ +#define MAX310X_PORT_STARTUP_WAIT_RETRIES 20 /* Number of retries */ +#define MAX310X_PORT_STARTUP_WAIT_DELAY_MS 10 /* Delay between retries */ + +/* Crystal-related definitions */ +#define MAX310X_XTAL_WAIT_RETRIES 20 /* Number of retries */ +#define MAX310X_XTAL_WAIT_DELAY_MS 10 /* Delay between retries */ + /* MAX3107 specific */ #define MAX3107_REV_ID (0xa0) @@ -245,7 +255,17 @@ #define MAX14830_BRGCFG_CLKDIS_BIT (1 << 6) /* Clock Disable */ #define MAX14830_REV_ID (0xb0) +struct max310x_if_cfg { + int (*extended_reg_enable)(struct device *dev, bool enable); + + unsigned int rev_id_reg; +}; + struct max310x_devtype { + struct { + unsigned short min; + unsigned short max; + } slave_addr; char name[9]; int nr; u8 mode1; @@ -258,16 +278,16 @@ struct max310x_one { struct work_struct tx_work; struct work_struct md_work; struct work_struct rs_work; + struct regmap *regmap; - u8 wr_header; - u8 rd_header; u8 rx_buf[MAX310X_FIFO_SIZE]; }; #define to_max310x_port(_port) \ container_of(_port, struct max310x_one, port) struct max310x_port { - struct max310x_devtype *devtype; + const struct max310x_devtype *devtype; + const struct max310x_if_cfg *if_cfg; struct regmap *regmap; struct clk *clk; #ifdef CONFIG_GPIOLIB @@ -289,26 +309,26 @@ static DECLARE_BITMAP(max310x_lines, MAX310X_UART_NRMAX); static u8 max310x_port_read(struct uart_port *port, u8 reg) { - struct max310x_port *s = dev_get_drvdata(port->dev); + struct max310x_one *one = to_max310x_port(port); unsigned int val = 0; - regmap_read(s->regmap, port->iobase + reg, &val); + regmap_read(one->regmap, reg, &val); return val; } static void max310x_port_write(struct uart_port *port, u8 reg, u8 val) { - struct max310x_port *s = dev_get_drvdata(port->dev); + struct max310x_one *one = to_max310x_port(port); - regmap_write(s->regmap, port->iobase + reg, val); + regmap_write(one->regmap, reg, val); } static void max310x_port_update(struct uart_port *port, u8 reg, u8 mask, u8 val) { - struct max310x_port *s = dev_get_drvdata(port->dev); + struct max310x_one *one = to_max310x_port(port); - regmap_update_bits(s->regmap, port->iobase + reg, mask, val); + regmap_update_bits(one->regmap, reg, mask, val); } static int max3107_detect(struct device *dev) @@ -357,13 +377,12 @@ static int max3109_detect(struct device *dev) unsigned int val = 0; int ret; - ret = regmap_write(s->regmap, MAX310X_GLOBALCMD_REG, - MAX310X_EXTREG_ENBL); + ret = s->if_cfg->extended_reg_enable(dev, true); if (ret) return ret; - regmap_read(s->regmap, MAX310X_REVID_EXTREG, &val); - regmap_write(s->regmap, MAX310X_GLOBALCMD_REG, MAX310X_EXTREG_DSBL); + regmap_read(s->regmap, s->if_cfg->rev_id_reg, &val); + s->if_cfg->extended_reg_enable(dev, false); if (((val & MAX310x_REV_MASK) != MAX3109_REV_ID)) { dev_err(dev, "%s ID 0x%02x does not match\n", s->devtype->name, val); @@ -388,13 +407,12 @@ static int max14830_detect(struct device *dev) unsigned int val = 0; int ret; - ret = regmap_write(s->regmap, MAX310X_GLOBALCMD_REG, - MAX310X_EXTREG_ENBL); + ret = s->if_cfg->extended_reg_enable(dev, true); if (ret) return ret; - regmap_read(s->regmap, MAX310X_REVID_EXTREG, &val); - regmap_write(s->regmap, MAX310X_GLOBALCMD_REG, MAX310X_EXTREG_DSBL); + regmap_read(s->regmap, s->if_cfg->rev_id_reg, &val); + s->if_cfg->extended_reg_enable(dev, false); if (((val & MAX310x_REV_MASK) != MAX14830_REV_ID)) { dev_err(dev, "%s ID 0x%02x does not match\n", s->devtype->name, val); @@ -419,6 +437,10 @@ static const struct max310x_devtype max3107_devtype = { .mode1 = MAX310X_MODE1_AUTOSLEEP_BIT | MAX310X_MODE1_IRQSEL_BIT, .detect = max3107_detect, .power = max310x_power, + .slave_addr = { + .min = 0x2c, + .max = 0x2f, + }, }; static const struct max310x_devtype max3108_devtype = { @@ -427,6 +449,10 @@ static const struct max310x_devtype max3108_devtype = { .mode1 = MAX310X_MODE1_AUTOSLEEP_BIT, .detect = max3108_detect, .power = max310x_power, + .slave_addr = { + .min = 0x60, + .max = 0x6f, + }, }; static const struct max310x_devtype max3109_devtype = { @@ -435,6 +461,10 @@ static const struct max310x_devtype max3109_devtype = { .mode1 = MAX310X_MODE1_AUTOSLEEP_BIT, .detect = max3109_detect, .power = max310x_power, + .slave_addr = { + .min = 0x60, + .max = 0x6f, + }, }; static const struct max310x_devtype max14830_devtype = { @@ -443,11 +473,15 @@ static const struct max310x_devtype max14830_devtype = { .mode1 = MAX310X_MODE1_IRQSEL_BIT, .detect = max14830_detect, .power = max14830_power, + .slave_addr = { + .min = 0x60, + .max = 0x6f, + }, }; static bool max310x_reg_writeable(struct device *dev, unsigned int reg) { - switch (reg & 0x1f) { + switch (reg) { case MAX310X_IRQSTS_REG: case MAX310X_LSR_IRQSTS_REG: case MAX310X_SPCHR_IRQSTS_REG: @@ -464,7 +498,7 @@ static bool max310x_reg_writeable(struct device *dev, unsigned int reg) static bool max310x_reg_volatile(struct device *dev, unsigned int reg) { - switch (reg & 0x1f) { + switch (reg) { case MAX310X_RHR_REG: case MAX310X_IRQSTS_REG: case MAX310X_LSR_IRQSTS_REG: @@ -486,7 +520,7 @@ static bool max310x_reg_volatile(struct device *dev, unsigned int reg) static bool max310x_reg_precious(struct device *dev, unsigned int reg) { - switch (reg & 0x1f) { + switch (reg) { case MAX310X_RHR_REG: case MAX310X_IRQSTS_REG: case MAX310X_SPCHR_IRQSTS_REG: @@ -499,6 +533,11 @@ static bool max310x_reg_precious(struct device *dev, unsigned int reg) return false; } +static bool max310x_reg_noinc(struct device *dev, unsigned int reg) +{ + return reg == MAX310X_RHR_REG; +} + static int max310x_set_baud(struct uart_port *port, int baud) { unsigned int mode = 0, div = 0, frac = 0, c = 0, F = 0; @@ -552,7 +591,7 @@ static int max310x_update_best_err(unsigned long f, long *besterr) return 1; } -static int max310x_set_ref_clk(struct device *dev, struct max310x_port *s, +static s32 max310x_set_ref_clk(struct device *dev, struct max310x_port *s, unsigned long freq, bool xtal) { unsigned int div, clksrc, pllcfg = 0; @@ -610,45 +649,37 @@ static int max310x_set_ref_clk(struct device *dev, struct max310x_port *s, /* Wait for crystal */ if (xtal) { - unsigned int val; - msleep(10); - regmap_read(s->regmap, MAX310X_STS_IRQSTS_REG, &val); - if (!(val & MAX310X_STS_CLKREADY_BIT)) { - dev_warn(dev, "clock is not stable yet\n"); - } + bool stable = false; + unsigned int try = 0, val = 0; + + do { + msleep(MAX310X_XTAL_WAIT_DELAY_MS); + regmap_read(s->regmap, MAX310X_STS_IRQSTS_REG, &val); + + if (val & MAX310X_STS_CLKREADY_BIT) + stable = true; + } while (!stable && (++try < MAX310X_XTAL_WAIT_RETRIES)); + + if (!stable) + return dev_err_probe(dev, -EAGAIN, + "clock is not stable\n"); } - return (int)bestfreq; + return bestfreq; } static void max310x_batch_write(struct uart_port *port, u8 *txbuf, unsigned int len) { struct max310x_one *one = to_max310x_port(port); - struct spi_transfer xfer[] = { - { - .tx_buf = &one->wr_header, - .len = sizeof(one->wr_header), - }, { - .tx_buf = txbuf, - .len = len, - } - }; - spi_sync_transfer(to_spi_device(port->dev), xfer, ARRAY_SIZE(xfer)); + + regmap_noinc_write(one->regmap, MAX310X_THR_REG, txbuf, len); } static void max310x_batch_read(struct uart_port *port, u8 *rxbuf, unsigned int len) { struct max310x_one *one = to_max310x_port(port); - struct spi_transfer xfer[] = { - { - .tx_buf = &one->rd_header, - .len = sizeof(one->rd_header), - }, { - .rx_buf = rxbuf, - .len = len, - } - }; - spi_sync_transfer(to_spi_device(port->dev), xfer, ARRAY_SIZE(xfer)); + + regmap_noinc_read(one->regmap, MAX310X_RHR_REG, rxbuf, len); } static void max310x_handle_rx(struct uart_port *port, unsigned int rxlen) @@ -1250,16 +1281,18 @@ static int max310x_gpio_set_config(struct gpio_chip *chip, unsigned int offset, } #endif -static int max310x_probe(struct device *dev, struct max310x_devtype *devtype, - struct regmap *regmap, int irq) +static int max310x_probe(struct device *dev, const struct max310x_devtype *devtype, + const struct max310x_if_cfg *if_cfg, + struct regmap *regmaps[], int irq) { - int i, ret, fmin, fmax, freq, uartclk; - struct clk *clk_osc, *clk_xtal; + int i, ret, fmin, fmax, freq; struct max310x_port *s; - bool xtal = false; + s32 uartclk = 0; + bool xtal; - if (IS_ERR(regmap)) - return PTR_ERR(regmap); + for (i = 0; i < devtype->nr; i++) + if (IS_ERR(regmaps[i])) + return PTR_ERR(regmaps[i]); /* Alloc port structure */ s = devm_kzalloc(dev, struct_size(s, p, devtype->nr), GFP_KERNEL); @@ -1268,23 +1301,20 @@ static int max310x_probe(struct device *dev, struct max310x_devtype *devtype, return -ENOMEM; } - clk_osc = devm_clk_get(dev, "osc"); - clk_xtal = devm_clk_get(dev, "xtal"); - if (!IS_ERR(clk_osc)) { - s->clk = clk_osc; - fmin = 500000; - fmax = 35000000; - } else if (!IS_ERR(clk_xtal)) { - s->clk = clk_xtal; - fmin = 1000000; - fmax = 4000000; - xtal = true; - } else if (PTR_ERR(clk_osc) == -EPROBE_DEFER || - PTR_ERR(clk_xtal) == -EPROBE_DEFER) { - return -EPROBE_DEFER; + /* Always ask for fixed clock rate from a property. */ + device_property_read_u32(dev, "clock-frequency", &uartclk); + + s->clk = devm_clk_get_optional(dev, "osc"); + if (IS_ERR(s->clk)) + return PTR_ERR(s->clk); + if (s->clk) { + xtal = false; } else { - dev_err(dev, "Cannot get clock\n"); - return -EINVAL; + s->clk = devm_clk_get_optional(dev, "xtal"); + if (IS_ERR(s->clk)) + return PTR_ERR(s->clk); + + xtal = true; } ret = clk_prepare_enable(s->clk); @@ -1292,14 +1322,31 @@ static int max310x_probe(struct device *dev, struct max310x_devtype *devtype, return ret; freq = clk_get_rate(s->clk); + if (freq == 0) + freq = uartclk; + if (freq == 0) { + dev_err(dev, "Cannot get clock rate\n"); + ret = -EINVAL; + goto out_clk; + } + + if (xtal) { + fmin = 1000000; + fmax = 4000000; + } else { + fmin = 500000; + fmax = 35000000; + } + /* Check frequency limits */ if (freq < fmin || freq > fmax) { ret = -ERANGE; goto out_clk; } - s->regmap = regmap; + s->regmap = regmaps[0]; s->devtype = devtype; + s->if_cfg = if_cfg; dev_set_drvdata(dev, s); /* Check device to ensure we are talking to what we expect */ @@ -1308,25 +1355,38 @@ static int max310x_probe(struct device *dev, struct max310x_devtype *devtype, goto out_clk; for (i = 0; i < devtype->nr; i++) { - unsigned int offs = i << 5; + bool started = false; + unsigned int try = 0, val = 0; /* Reset port */ - regmap_write(s->regmap, MAX310X_MODE2_REG + offs, + regmap_write(regmaps[i], MAX310X_MODE2_REG, MAX310X_MODE2_RST_BIT); /* Clear port reset */ - regmap_write(s->regmap, MAX310X_MODE2_REG + offs, 0); + regmap_write(regmaps[i], MAX310X_MODE2_REG, 0); /* Wait for port startup */ do { - regmap_read(s->regmap, - MAX310X_BRGDIVLSB_REG + offs, &ret); - } while (ret != 0x01); + msleep(MAX310X_PORT_STARTUP_WAIT_DELAY_MS); + regmap_read(regmaps[i], MAX310X_BRGDIVLSB_REG, &val); + + if (val == 0x01) + started = true; + } while (!started && (++try < MAX310X_PORT_STARTUP_WAIT_RETRIES)); + + if (!started) { + ret = dev_err_probe(dev, -EAGAIN, "port reset failed\n"); + goto out_uart; + } - regmap_write(s->regmap, MAX310X_MODE1_REG + offs, - devtype->mode1); + regmap_write(regmaps[i], MAX310X_MODE1_REG, devtype->mode1); } uartclk = max310x_set_ref_clk(dev, s, freq, xtal); + if (uartclk < 0) { + ret = uartclk; + goto out_uart; + } + dev_dbg(dev, "Reference clock set to %i Hz\n", uartclk); for (i = 0; i < devtype->nr; i++) { @@ -1346,11 +1406,13 @@ static int max310x_probe(struct device *dev, struct max310x_devtype *devtype, s->p[i].port.fifosize = MAX310X_FIFO_SIZE; s->p[i].port.flags = UPF_FIXED_TYPE | UPF_LOW_LATENCY; s->p[i].port.iotype = UPIO_PORT; - s->p[i].port.iobase = i * 0x20; + s->p[i].port.iobase = i; s->p[i].port.membase = (void __iomem *)~0; s->p[i].port.uartclk = uartclk; s->p[i].port.rs485_config = max310x_rs485_config; s->p[i].port.ops = &max310x_ops; + s->p[i].regmap = regmaps[i]; + /* Disable all interrupts */ max310x_port_write(&s->p[i].port, MAX310X_IRQEN_REG, 0); /* Clear IRQ status register */ @@ -1361,10 +1423,6 @@ static int max310x_probe(struct device *dev, struct max310x_devtype *devtype, INIT_WORK(&s->p[i].md_work, max310x_md_proc); /* Initialize queue for changing RS485 mode */ INIT_WORK(&s->p[i].rs_work, max310x_rs_proc); - /* Initialize SPI-transfer buffers */ - s->p[i].wr_header = (s->p[i].port.iobase + MAX310X_THR_REG) | - MAX310X_WRITE_BIT; - s->p[i].rd_header = (s->p[i].port.iobase + MAX310X_RHR_REG); /* Register port */ ret = uart_add_one_port(&max310x_uart, &s->p[i].port); @@ -1402,7 +1460,7 @@ static int max310x_probe(struct device *dev, struct max310x_devtype *devtype, if (!ret) return 0; - dev_err(dev, "Unable to reguest IRQ %i\n", irq); + dev_err(dev, "Unable to request IRQ %i\n", irq); out_uart: for (i = 0; i < devtype->nr; i++) { @@ -1451,16 +1509,35 @@ static struct regmap_config regcfg = { .val_bits = 8, .write_flag_mask = MAX310X_WRITE_BIT, .cache_type = REGCACHE_RBTREE, + .max_register = MAX310X_REG_1F, .writeable_reg = max310x_reg_writeable, .volatile_reg = max310x_reg_volatile, .precious_reg = max310x_reg_precious, + .writeable_noinc_reg = max310x_reg_noinc, + .readable_noinc_reg = max310x_reg_noinc, + .max_raw_read = MAX310X_FIFO_SIZE, + .max_raw_write = MAX310X_FIFO_SIZE, }; #ifdef CONFIG_SPI_MASTER +static int max310x_spi_extended_reg_enable(struct device *dev, bool enable) +{ + struct max310x_port *s = dev_get_drvdata(dev); + + return regmap_write(s->regmap, MAX310X_GLOBALCMD_REG, + enable ? MAX310X_EXTREG_ENBL : MAX310X_EXTREG_DSBL); +} + +static const struct max310x_if_cfg __maybe_unused max310x_spi_if_cfg = { + .extended_reg_enable = max310x_spi_extended_reg_enable, + .rev_id_reg = MAX310X_SPI_REVID_EXTREG, +}; + static int max310x_spi_probe(struct spi_device *spi) { - struct max310x_devtype *devtype; - struct regmap *regmap; + const struct max310x_devtype *devtype; + struct regmap *regmaps[4]; + unsigned int i; int ret; /* Setup SPI bus */ @@ -1471,23 +1548,18 @@ static int max310x_spi_probe(struct spi_device *spi) if (ret) return ret; - if (spi->dev.of_node) { - const struct of_device_id *of_id = - of_match_device(max310x_dt_ids, &spi->dev); - if (!of_id) - return -ENODEV; + devtype = device_get_match_data(&spi->dev); + if (!devtype) + devtype = (struct max310x_devtype *)spi_get_device_id(spi)->driver_data; - devtype = (struct max310x_devtype *)of_id->data; - } else { - const struct spi_device_id *id_entry = spi_get_device_id(spi); - - devtype = (struct max310x_devtype *)id_entry->driver_data; + for (i = 0; i < devtype->nr; i++) { + u8 port_mask = i * 0x20; + regcfg.read_flag_mask = port_mask; + regcfg.write_flag_mask = port_mask | MAX310X_WRITE_BIT; + regmaps[i] = devm_regmap_init_spi(spi, ®cfg); } - regcfg.max_register = devtype->nr * 0x20 - 1; - regmap = devm_regmap_init_spi(spi, ®cfg); - - return max310x_probe(&spi->dev, devtype, regmap, spi->irq); + return max310x_probe(&spi->dev, devtype, &max310x_spi_if_cfg, regmaps, spi->irq); } static int max310x_spi_remove(struct spi_device *spi) @@ -1507,7 +1579,7 @@ MODULE_DEVICE_TABLE(spi, max310x_id_table); static struct spi_driver max310x_spi_driver = { .driver = { .name = MAX310X_NAME, - .of_match_table = of_match_ptr(max310x_dt_ids), + .of_match_table = max310x_dt_ids, .pm = &max310x_pm_ops, }, .probe = max310x_spi_probe, @@ -1516,6 +1588,104 @@ static struct spi_driver max310x_spi_driver = { }; #endif +#ifdef CONFIG_I2C +static int max310x_i2c_extended_reg_enable(struct device *dev, bool enable) +{ + return 0; +} + +static struct regmap_config regcfg_i2c = { + .reg_bits = 8, + .val_bits = 8, + .cache_type = REGCACHE_RBTREE, + .writeable_reg = max310x_reg_writeable, + .volatile_reg = max310x_reg_volatile, + .precious_reg = max310x_reg_precious, + .max_register = MAX310X_I2C_REVID_EXTREG, + .writeable_noinc_reg = max310x_reg_noinc, + .readable_noinc_reg = max310x_reg_noinc, + .max_raw_read = MAX310X_FIFO_SIZE, + .max_raw_write = MAX310X_FIFO_SIZE, +}; + +static const struct max310x_if_cfg max310x_i2c_if_cfg = { + .extended_reg_enable = max310x_i2c_extended_reg_enable, + .rev_id_reg = MAX310X_I2C_REVID_EXTREG, +}; + +static unsigned short max310x_i2c_slave_addr(unsigned short addr, + unsigned int nr) +{ + /* + * For MAX14830 and MAX3109, the slave address depends on what the + * A0 and A1 pins are tied to. + * See Table I2C Address Map of the datasheet. + * Based on that table, the following formulas were determined. + * UART1 - UART0 = 0x10 + * UART2 - UART1 = 0x20 + 0x10 + * UART3 - UART2 = 0x10 + */ + + addr -= nr * 0x10; + + if (nr >= 2) + addr -= 0x20; + + return addr; +} + +static int max310x_i2c_probe(struct i2c_client *client) +{ + const struct max310x_devtype *devtype; + struct i2c_client *port_client; + struct regmap *regmaps[4]; + unsigned int i; + u8 port_addr; + + devtype = device_get_match_data(&client->dev); + if (!devtype) + return dev_err_probe(&client->dev, -ENODEV, "Failed to match device\n"); + + if (client->addr < devtype->slave_addr.min || + client->addr > devtype->slave_addr.max) + return dev_err_probe(&client->dev, -EINVAL, + "Slave addr 0x%x outside of range [0x%x, 0x%x]\n", + client->addr, devtype->slave_addr.min, + devtype->slave_addr.max); + + regmaps[0] = devm_regmap_init_i2c(client, ®cfg_i2c); + + for (i = 1; i < devtype->nr; i++) { + port_addr = max310x_i2c_slave_addr(client->addr, i); + port_client = devm_i2c_new_dummy_device(&client->dev, + client->adapter, + port_addr); + + regmaps[i] = devm_regmap_init_i2c(port_client, ®cfg_i2c); + } + + return max310x_probe(&client->dev, devtype, &max310x_i2c_if_cfg, + regmaps, client->irq); +} + +static int max310x_i2c_remove(struct i2c_client *client) +{ + max310x_remove(&client->dev); + + return 0; +} + +static struct i2c_driver max310x_i2c_driver = { + .driver = { + .name = MAX310X_NAME, + .of_match_table = max310x_dt_ids, + .pm = &max310x_pm_ops, + }, + .probe_new = max310x_i2c_probe, + .remove = max310x_i2c_remove, +}; +#endif + static int __init max310x_uart_init(void) { int ret; @@ -1529,15 +1699,35 @@ static int __init max310x_uart_init(void) #ifdef CONFIG_SPI_MASTER ret = spi_register_driver(&max310x_spi_driver); if (ret) - uart_unregister_driver(&max310x_uart); + goto err_spi_register; +#endif + +#ifdef CONFIG_I2C + ret = i2c_add_driver(&max310x_i2c_driver); + if (ret) + goto err_i2c_register; +#endif + + return 0; + +#ifdef CONFIG_I2C +err_i2c_register: + spi_unregister_driver(&max310x_spi_driver); #endif +err_spi_register: + uart_unregister_driver(&max310x_uart); + return ret; } module_init(max310x_uart_init); static void __exit max310x_uart_exit(void) { +#ifdef CONFIG_I2C + i2c_del_driver(&max310x_i2c_driver); +#endif + #ifdef CONFIG_SPI_MASTER spi_unregister_driver(&max310x_spi_driver); #endif |