diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/tty/serial/pch_uart.c | 1968 |
1 files changed, 1968 insertions, 0 deletions
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c new file mode 100644 index 000000000..cb68a1028 --- /dev/null +++ b/drivers/tty/serial/pch_uart.c @@ -0,0 +1,1968 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + *Copyright (C) 2011 LAPIS Semiconductor Co., Ltd. + */ +#include <linux/kernel.h> +#include <linux/serial_reg.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/console.h> +#include <linux/serial_core.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/dmi.h> +#include <linux/nmi.h> +#include <linux/delay.h> +#include <linux/of.h> + +#include <linux/debugfs.h> +#include <linux/dmaengine.h> +#include <linux/pch_dma.h> + +enum { + PCH_UART_HANDLED_RX_INT_SHIFT, + PCH_UART_HANDLED_TX_INT_SHIFT, + PCH_UART_HANDLED_RX_ERR_INT_SHIFT, + PCH_UART_HANDLED_RX_TRG_INT_SHIFT, + PCH_UART_HANDLED_MS_INT_SHIFT, + PCH_UART_HANDLED_LS_INT_SHIFT, +}; + +#define PCH_UART_DRIVER_DEVICE "ttyPCH" + +/* Set the max number of UART port + * Intel EG20T PCH: 4 port + * LAPIS Semiconductor ML7213 IOH: 3 port + * LAPIS Semiconductor ML7223 IOH: 2 port +*/ +#define PCH_UART_NR 4 + +#define PCH_UART_HANDLED_RX_INT (1<<((PCH_UART_HANDLED_RX_INT_SHIFT)<<1)) +#define PCH_UART_HANDLED_TX_INT (1<<((PCH_UART_HANDLED_TX_INT_SHIFT)<<1)) +#define PCH_UART_HANDLED_RX_ERR_INT (1<<((\ + PCH_UART_HANDLED_RX_ERR_INT_SHIFT)<<1)) +#define PCH_UART_HANDLED_RX_TRG_INT (1<<((\ + PCH_UART_HANDLED_RX_TRG_INT_SHIFT)<<1)) +#define PCH_UART_HANDLED_MS_INT (1<<((PCH_UART_HANDLED_MS_INT_SHIFT)<<1)) + +#define PCH_UART_HANDLED_LS_INT (1<<((PCH_UART_HANDLED_LS_INT_SHIFT)<<1)) + +#define PCH_UART_RBR 0x00 +#define PCH_UART_THR 0x00 + +#define PCH_UART_IER_MASK (PCH_UART_IER_ERBFI|PCH_UART_IER_ETBEI|\ + PCH_UART_IER_ELSI|PCH_UART_IER_EDSSI) +#define PCH_UART_IER_ERBFI 0x00000001 +#define PCH_UART_IER_ETBEI 0x00000002 +#define PCH_UART_IER_ELSI 0x00000004 +#define PCH_UART_IER_EDSSI 0x00000008 + +#define PCH_UART_IIR_IP 0x00000001 +#define PCH_UART_IIR_IID 0x00000006 +#define PCH_UART_IIR_MSI 0x00000000 +#define PCH_UART_IIR_TRI 0x00000002 +#define PCH_UART_IIR_RRI 0x00000004 +#define PCH_UART_IIR_REI 0x00000006 +#define PCH_UART_IIR_TOI 0x00000008 +#define PCH_UART_IIR_FIFO256 0x00000020 +#define PCH_UART_IIR_FIFO64 PCH_UART_IIR_FIFO256 +#define PCH_UART_IIR_FE 0x000000C0 + +#define PCH_UART_FCR_FIFOE 0x00000001 +#define PCH_UART_FCR_RFR 0x00000002 +#define PCH_UART_FCR_TFR 0x00000004 +#define PCH_UART_FCR_DMS 0x00000008 +#define PCH_UART_FCR_FIFO256 0x00000020 +#define PCH_UART_FCR_RFTL 0x000000C0 + +#define PCH_UART_FCR_RFTL1 0x00000000 +#define PCH_UART_FCR_RFTL64 0x00000040 +#define PCH_UART_FCR_RFTL128 0x00000080 +#define PCH_UART_FCR_RFTL224 0x000000C0 +#define PCH_UART_FCR_RFTL16 PCH_UART_FCR_RFTL64 +#define PCH_UART_FCR_RFTL32 PCH_UART_FCR_RFTL128 +#define PCH_UART_FCR_RFTL56 PCH_UART_FCR_RFTL224 +#define PCH_UART_FCR_RFTL4 PCH_UART_FCR_RFTL64 +#define PCH_UART_FCR_RFTL8 PCH_UART_FCR_RFTL128 +#define PCH_UART_FCR_RFTL14 PCH_UART_FCR_RFTL224 +#define PCH_UART_FCR_RFTL_SHIFT 6 + +#define PCH_UART_LCR_WLS 0x00000003 +#define PCH_UART_LCR_STB 0x00000004 +#define PCH_UART_LCR_PEN 0x00000008 +#define PCH_UART_LCR_EPS 0x00000010 +#define PCH_UART_LCR_SP 0x00000020 +#define PCH_UART_LCR_SB 0x00000040 +#define PCH_UART_LCR_DLAB 0x00000080 +#define PCH_UART_LCR_NP 0x00000000 +#define PCH_UART_LCR_OP PCH_UART_LCR_PEN +#define PCH_UART_LCR_EP (PCH_UART_LCR_PEN | PCH_UART_LCR_EPS) +#define PCH_UART_LCR_1P (PCH_UART_LCR_PEN | PCH_UART_LCR_SP) +#define PCH_UART_LCR_0P (PCH_UART_LCR_PEN | PCH_UART_LCR_EPS |\ + PCH_UART_LCR_SP) + +#define PCH_UART_LCR_5BIT 0x00000000 +#define PCH_UART_LCR_6BIT 0x00000001 +#define PCH_UART_LCR_7BIT 0x00000002 +#define PCH_UART_LCR_8BIT 0x00000003 + +#define PCH_UART_MCR_DTR 0x00000001 +#define PCH_UART_MCR_RTS 0x00000002 +#define PCH_UART_MCR_OUT 0x0000000C +#define PCH_UART_MCR_LOOP 0x00000010 +#define PCH_UART_MCR_AFE 0x00000020 + +#define PCH_UART_LSR_DR 0x00000001 +#define PCH_UART_LSR_ERR (1<<7) + +#define PCH_UART_MSR_DCTS 0x00000001 +#define PCH_UART_MSR_DDSR 0x00000002 +#define PCH_UART_MSR_TERI 0x00000004 +#define PCH_UART_MSR_DDCD 0x00000008 +#define PCH_UART_MSR_CTS 0x00000010 +#define PCH_UART_MSR_DSR 0x00000020 +#define PCH_UART_MSR_RI 0x00000040 +#define PCH_UART_MSR_DCD 0x00000080 +#define PCH_UART_MSR_DELTA (PCH_UART_MSR_DCTS | PCH_UART_MSR_DDSR |\ + PCH_UART_MSR_TERI | PCH_UART_MSR_DDCD) + +#define PCH_UART_DLL 0x00 +#define PCH_UART_DLM 0x01 + +#define PCH_UART_BRCSR 0x0E + +#define PCH_UART_IID_RLS (PCH_UART_IIR_REI) +#define PCH_UART_IID_RDR (PCH_UART_IIR_RRI) +#define PCH_UART_IID_RDR_TO (PCH_UART_IIR_RRI | PCH_UART_IIR_TOI) +#define PCH_UART_IID_THRE (PCH_UART_IIR_TRI) +#define PCH_UART_IID_MS (PCH_UART_IIR_MSI) + +#define PCH_UART_HAL_PARITY_NONE (PCH_UART_LCR_NP) +#define PCH_UART_HAL_PARITY_ODD (PCH_UART_LCR_OP) +#define PCH_UART_HAL_PARITY_EVEN (PCH_UART_LCR_EP) +#define PCH_UART_HAL_PARITY_FIX1 (PCH_UART_LCR_1P) +#define PCH_UART_HAL_PARITY_FIX0 (PCH_UART_LCR_0P) +#define PCH_UART_HAL_5BIT (PCH_UART_LCR_5BIT) +#define PCH_UART_HAL_6BIT (PCH_UART_LCR_6BIT) +#define PCH_UART_HAL_7BIT (PCH_UART_LCR_7BIT) +#define PCH_UART_HAL_8BIT (PCH_UART_LCR_8BIT) +#define PCH_UART_HAL_STB1 0 +#define PCH_UART_HAL_STB2 (PCH_UART_LCR_STB) + +#define PCH_UART_HAL_CLR_TX_FIFO (PCH_UART_FCR_TFR) +#define PCH_UART_HAL_CLR_RX_FIFO (PCH_UART_FCR_RFR) +#define PCH_UART_HAL_CLR_ALL_FIFO (PCH_UART_HAL_CLR_TX_FIFO | \ + PCH_UART_HAL_CLR_RX_FIFO) + +#define PCH_UART_HAL_DMA_MODE0 0 +#define PCH_UART_HAL_FIFO_DIS 0 +#define PCH_UART_HAL_FIFO16 (PCH_UART_FCR_FIFOE) +#define PCH_UART_HAL_FIFO256 (PCH_UART_FCR_FIFOE | \ + PCH_UART_FCR_FIFO256) +#define PCH_UART_HAL_FIFO64 (PCH_UART_HAL_FIFO256) +#define PCH_UART_HAL_TRIGGER1 (PCH_UART_FCR_RFTL1) +#define PCH_UART_HAL_TRIGGER64 (PCH_UART_FCR_RFTL64) +#define PCH_UART_HAL_TRIGGER128 (PCH_UART_FCR_RFTL128) +#define PCH_UART_HAL_TRIGGER224 (PCH_UART_FCR_RFTL224) +#define PCH_UART_HAL_TRIGGER16 (PCH_UART_FCR_RFTL16) +#define PCH_UART_HAL_TRIGGER32 (PCH_UART_FCR_RFTL32) +#define PCH_UART_HAL_TRIGGER56 (PCH_UART_FCR_RFTL56) +#define PCH_UART_HAL_TRIGGER4 (PCH_UART_FCR_RFTL4) +#define PCH_UART_HAL_TRIGGER8 (PCH_UART_FCR_RFTL8) +#define PCH_UART_HAL_TRIGGER14 (PCH_UART_FCR_RFTL14) +#define PCH_UART_HAL_TRIGGER_L (PCH_UART_FCR_RFTL64) +#define PCH_UART_HAL_TRIGGER_M (PCH_UART_FCR_RFTL128) +#define PCH_UART_HAL_TRIGGER_H (PCH_UART_FCR_RFTL224) + +#define PCH_UART_HAL_RX_INT (PCH_UART_IER_ERBFI) +#define PCH_UART_HAL_TX_INT (PCH_UART_IER_ETBEI) +#define PCH_UART_HAL_RX_ERR_INT (PCH_UART_IER_ELSI) +#define PCH_UART_HAL_MS_INT (PCH_UART_IER_EDSSI) +#define PCH_UART_HAL_ALL_INT (PCH_UART_IER_MASK) + +#define PCH_UART_HAL_DTR (PCH_UART_MCR_DTR) +#define PCH_UART_HAL_RTS (PCH_UART_MCR_RTS) +#define PCH_UART_HAL_OUT (PCH_UART_MCR_OUT) +#define PCH_UART_HAL_LOOP (PCH_UART_MCR_LOOP) +#define PCH_UART_HAL_AFE (PCH_UART_MCR_AFE) + +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +#define DEFAULT_UARTCLK 1843200 /* 1.8432 MHz */ +#define CMITC_UARTCLK 192000000 /* 192.0000 MHz */ +#define FRI2_64_UARTCLK 64000000 /* 64.0000 MHz */ +#define FRI2_48_UARTCLK 48000000 /* 48.0000 MHz */ +#define NTC1_UARTCLK 64000000 /* 64.0000 MHz */ +#define MINNOW_UARTCLK 50000000 /* 50.0000 MHz */ + +struct pch_uart_buffer { + unsigned char *buf; + int size; +}; + +struct eg20t_port { + struct uart_port port; + int port_type; + void __iomem *membase; + resource_size_t mapbase; + unsigned int iobase; + struct pci_dev *pdev; + int fifo_size; + unsigned int uartclk; + int start_tx; + int start_rx; + int tx_empty; + int trigger; + int trigger_level; + struct pch_uart_buffer rxbuf; + unsigned int dmsr; + unsigned int fcr; + unsigned int mcr; + unsigned int use_dma; + struct dma_async_tx_descriptor *desc_tx; + struct dma_async_tx_descriptor *desc_rx; + struct pch_dma_slave param_tx; + struct pch_dma_slave param_rx; + struct dma_chan *chan_tx; + struct dma_chan *chan_rx; + struct scatterlist *sg_tx_p; + int nent; + int orig_nent; + struct scatterlist sg_rx; + int tx_dma_use; + void *rx_buf_virt; + dma_addr_t rx_buf_dma; + + struct dentry *debugfs; +#define IRQ_NAME_SIZE 17 + char irq_name[IRQ_NAME_SIZE]; + + /* protect the eg20t_port private structure and io access to membase */ + spinlock_t lock; +}; + +/** + * struct pch_uart_driver_data - private data structure for UART-DMA + * @port_type: The type of UART port + * @line_no: UART port line number (0, 1, 2...) + */ +struct pch_uart_driver_data { + int port_type; + int line_no; +}; + +enum pch_uart_num_t { + pch_et20t_uart0 = 0, + pch_et20t_uart1, + pch_et20t_uart2, + pch_et20t_uart3, + pch_ml7213_uart0, + pch_ml7213_uart1, + pch_ml7213_uart2, + pch_ml7223_uart0, + pch_ml7223_uart1, + pch_ml7831_uart0, + pch_ml7831_uart1, +}; + +static struct pch_uart_driver_data drv_dat[] = { + [pch_et20t_uart0] = {PORT_PCH_8LINE, 0}, + [pch_et20t_uart1] = {PORT_PCH_2LINE, 1}, + [pch_et20t_uart2] = {PORT_PCH_2LINE, 2}, + [pch_et20t_uart3] = {PORT_PCH_2LINE, 3}, + [pch_ml7213_uart0] = {PORT_PCH_8LINE, 0}, + [pch_ml7213_uart1] = {PORT_PCH_2LINE, 1}, + [pch_ml7213_uart2] = {PORT_PCH_2LINE, 2}, + [pch_ml7223_uart0] = {PORT_PCH_8LINE, 0}, + [pch_ml7223_uart1] = {PORT_PCH_2LINE, 1}, + [pch_ml7831_uart0] = {PORT_PCH_8LINE, 0}, + [pch_ml7831_uart1] = {PORT_PCH_2LINE, 1}, +}; + +#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE +static struct eg20t_port *pch_uart_ports[PCH_UART_NR]; +#endif +static unsigned int default_baud = 9600; +static unsigned int user_uartclk = 0; +static const int trigger_level_256[4] = { 1, 64, 128, 224 }; +static const int trigger_level_64[4] = { 1, 16, 32, 56 }; +static const int trigger_level_16[4] = { 1, 4, 8, 14 }; +static const int trigger_level_1[4] = { 1, 1, 1, 1 }; + +#ifdef CONFIG_DEBUG_FS + +#define PCH_REGS_BUFSIZE 1024 + + +static ssize_t port_show_regs(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct eg20t_port *priv = file->private_data; + char *buf; + u32 len = 0; + ssize_t ret; + unsigned char lcr; + + buf = kzalloc(PCH_REGS_BUFSIZE, GFP_KERNEL); + if (!buf) + return 0; + + len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len, + "PCH EG20T port[%d] regs:\n", priv->port.line); + + len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len, + "=================================\n"); + len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len, + "IER: \t0x%02x\n", ioread8(priv->membase + UART_IER)); + len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len, + "IIR: \t0x%02x\n", ioread8(priv->membase + UART_IIR)); + len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len, + "LCR: \t0x%02x\n", ioread8(priv->membase + UART_LCR)); + len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len, + "MCR: \t0x%02x\n", ioread8(priv->membase + UART_MCR)); + len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len, + "LSR: \t0x%02x\n", ioread8(priv->membase + UART_LSR)); + len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len, + "MSR: \t0x%02x\n", ioread8(priv->membase + UART_MSR)); + len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len, + "BRCSR: \t0x%02x\n", + ioread8(priv->membase + PCH_UART_BRCSR)); + + lcr = ioread8(priv->membase + UART_LCR); + iowrite8(PCH_UART_LCR_DLAB, priv->membase + UART_LCR); + len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len, + "DLL: \t0x%02x\n", ioread8(priv->membase + UART_DLL)); + len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len, + "DLM: \t0x%02x\n", ioread8(priv->membase + UART_DLM)); + iowrite8(lcr, priv->membase + UART_LCR); + + if (len > PCH_REGS_BUFSIZE) + len = PCH_REGS_BUFSIZE; + + ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); + kfree(buf); + return ret; +} + +static const struct file_operations port_regs_ops = { + .owner = THIS_MODULE, + .open = simple_open, + .read = port_show_regs, + .llseek = default_llseek, +}; +#endif /* CONFIG_DEBUG_FS */ + +static const struct dmi_system_id pch_uart_dmi_table[] = { + { + .ident = "CM-iTC", + { + DMI_MATCH(DMI_BOARD_NAME, "CM-iTC"), + }, + (void *)CMITC_UARTCLK, + }, + { + .ident = "FRI2", + { + DMI_MATCH(DMI_BIOS_VERSION, "FRI2"), + }, + (void *)FRI2_64_UARTCLK, + }, + { + .ident = "Fish River Island II", + { + DMI_MATCH(DMI_PRODUCT_NAME, "Fish River Island II"), + }, + (void *)FRI2_48_UARTCLK, + }, + { + .ident = "COMe-mTT", + { + DMI_MATCH(DMI_BOARD_NAME, "COMe-mTT"), + }, + (void *)NTC1_UARTCLK, + }, + { + .ident = "nanoETXexpress-TT", + { + DMI_MATCH(DMI_BOARD_NAME, "nanoETXexpress-TT"), + }, + (void *)NTC1_UARTCLK, + }, + { + .ident = "MinnowBoard", + { + DMI_MATCH(DMI_BOARD_NAME, "MinnowBoard"), + }, + (void *)MINNOW_UARTCLK, + }, + { } +}; + +/* Return UART clock, checking for board specific clocks. */ +static unsigned int pch_uart_get_uartclk(void) +{ + const struct dmi_system_id *d; + + if (user_uartclk) + return user_uartclk; + + d = dmi_first_match(pch_uart_dmi_table); + if (d) + return (unsigned long)d->driver_data; + + return DEFAULT_UARTCLK; +} + +static void pch_uart_hal_enable_interrupt(struct eg20t_port *priv, + unsigned int flag) +{ + u8 ier = ioread8(priv->membase + UART_IER); + ier |= flag & PCH_UART_IER_MASK; + iowrite8(ier, priv->membase + UART_IER); +} + +static void pch_uart_hal_disable_interrupt(struct eg20t_port *priv, + unsigned int flag) +{ + u8 ier = ioread8(priv->membase + UART_IER); + ier &= ~(flag & PCH_UART_IER_MASK); + iowrite8(ier, priv->membase + UART_IER); +} + +static int pch_uart_hal_set_line(struct eg20t_port *priv, unsigned int baud, + unsigned int parity, unsigned int bits, + unsigned int stb) +{ + unsigned int dll, dlm, lcr; + int div; + + div = DIV_ROUND_CLOSEST(priv->uartclk / 16, baud); + if (div < 0 || USHRT_MAX <= div) { + dev_err(priv->port.dev, "Invalid Baud(div=0x%x)\n", div); + return -EINVAL; + } + + dll = (unsigned int)div & 0x00FFU; + dlm = ((unsigned int)div >> 8) & 0x00FFU; + + if (parity & ~(PCH_UART_LCR_PEN | PCH_UART_LCR_EPS | PCH_UART_LCR_SP)) { + dev_err(priv->port.dev, "Invalid parity(0x%x)\n", parity); + return -EINVAL; + } + + if (bits & ~PCH_UART_LCR_WLS) { + dev_err(priv->port.dev, "Invalid bits(0x%x)\n", bits); + return -EINVAL; + } + + if (stb & ~PCH_UART_LCR_STB) { + dev_err(priv->port.dev, "Invalid STB(0x%x)\n", stb); + return -EINVAL; + } + + lcr = parity; + lcr |= bits; + lcr |= stb; + + dev_dbg(priv->port.dev, "%s:baud = %u, div = %04x, lcr = %02x (%lu)\n", + __func__, baud, div, lcr, jiffies); + iowrite8(PCH_UART_LCR_DLAB, priv->membase + UART_LCR); + iowrite8(dll, priv->membase + PCH_UART_DLL); + iowrite8(dlm, priv->membase + PCH_UART_DLM); + iowrite8(lcr, priv->membase + UART_LCR); + + return 0; +} + +static int pch_uart_hal_fifo_reset(struct eg20t_port *priv, + unsigned int flag) +{ + if (flag & ~(PCH_UART_FCR_TFR | PCH_UART_FCR_RFR)) { + dev_err(priv->port.dev, "%s:Invalid flag(0x%x)\n", + __func__, flag); + return -EINVAL; + } + + iowrite8(PCH_UART_FCR_FIFOE | priv->fcr, priv->membase + UART_FCR); + iowrite8(PCH_UART_FCR_FIFOE | priv->fcr | flag, + priv->membase + UART_FCR); + iowrite8(priv->fcr, priv->membase + UART_FCR); + + return 0; +} + +static int pch_uart_hal_set_fifo(struct eg20t_port *priv, + unsigned int dmamode, + unsigned int fifo_size, unsigned int trigger) +{ + u8 fcr; + + if (dmamode & ~PCH_UART_FCR_DMS) { + dev_err(priv->port.dev, "%s:Invalid DMA Mode(0x%x)\n", + __func__, dmamode); + return -EINVAL; + } + + if (fifo_size & ~(PCH_UART_FCR_FIFOE | PCH_UART_FCR_FIFO256)) { + dev_err(priv->port.dev, "%s:Invalid FIFO SIZE(0x%x)\n", + __func__, fifo_size); + return -EINVAL; + } + + if (trigger & ~PCH_UART_FCR_RFTL) { + dev_err(priv->port.dev, "%s:Invalid TRIGGER(0x%x)\n", + __func__, trigger); + return -EINVAL; + } + + switch (priv->fifo_size) { + case 256: + priv->trigger_level = + trigger_level_256[trigger >> PCH_UART_FCR_RFTL_SHIFT]; + break; + case 64: + priv->trigger_level = + trigger_level_64[trigger >> PCH_UART_FCR_RFTL_SHIFT]; + break; + case 16: + priv->trigger_level = + trigger_level_16[trigger >> PCH_UART_FCR_RFTL_SHIFT]; + break; + default: + priv->trigger_level = + trigger_level_1[trigger >> PCH_UART_FCR_RFTL_SHIFT]; + break; + } + fcr = + dmamode | fifo_size | trigger | PCH_UART_FCR_RFR | PCH_UART_FCR_TFR; + iowrite8(PCH_UART_FCR_FIFOE, priv->membase + UART_FCR); + iowrite8(PCH_UART_FCR_FIFOE | PCH_UART_FCR_RFR | PCH_UART_FCR_TFR, + priv->membase + UART_FCR); + iowrite8(fcr, priv->membase + UART_FCR); + priv->fcr = fcr; + + return 0; +} + +static u8 pch_uart_hal_get_modem(struct eg20t_port *priv) +{ + unsigned int msr = ioread8(priv->membase + UART_MSR); + priv->dmsr = msr & PCH_UART_MSR_DELTA; + return (u8)msr; +} + +static void pch_uart_hal_write(struct eg20t_port *priv, + const unsigned char *buf, int tx_size) +{ + int i; + unsigned int thr; + + for (i = 0; i < tx_size;) { + thr = buf[i++]; + iowrite8(thr, priv->membase + PCH_UART_THR); + } +} + +static int pch_uart_hal_read(struct eg20t_port *priv, unsigned char *buf, + int rx_size) +{ + int i; + u8 rbr, lsr; + struct uart_port *port = &priv->port; + + lsr = ioread8(priv->membase + UART_LSR); + for (i = 0, lsr = ioread8(priv->membase + UART_LSR); + i < rx_size && lsr & (UART_LSR_DR | UART_LSR_BI); + lsr = ioread8(priv->membase + UART_LSR)) { + rbr = ioread8(priv->membase + PCH_UART_RBR); + + if (lsr & UART_LSR_BI) { + port->icount.brk++; + if (uart_handle_break(port)) + continue; + } + if (uart_handle_sysrq_char(port, rbr)) + continue; + + buf[i++] = rbr; + } + return i; +} + +static unsigned char pch_uart_hal_get_iid(struct eg20t_port *priv) +{ + return ioread8(priv->membase + UART_IIR) &\ + (PCH_UART_IIR_IID | PCH_UART_IIR_TOI | PCH_UART_IIR_IP); +} + +static u8 pch_uart_hal_get_line_status(struct eg20t_port *priv) +{ + return ioread8(priv->membase + UART_LSR); +} + +static void pch_uart_hal_set_break(struct eg20t_port *priv, int on) +{ + unsigned int lcr; + + lcr = ioread8(priv->membase + UART_LCR); + if (on) + lcr |= PCH_UART_LCR_SB; + else + lcr &= ~PCH_UART_LCR_SB; + + iowrite8(lcr, priv->membase + UART_LCR); +} + +static int push_rx(struct eg20t_port *priv, const unsigned char *buf, + int size) +{ + struct uart_port *port = &priv->port; + struct tty_port *tport = &port->state->port; + + tty_insert_flip_string(tport, buf, size); + tty_flip_buffer_push(tport); + + return 0; +} + +static int dma_push_rx(struct eg20t_port *priv, int size) +{ + int room; + struct uart_port *port = &priv->port; + struct tty_port *tport = &port->state->port; + + room = tty_buffer_request_room(tport, size); + + if (room < size) + dev_warn(port->dev, "Rx overrun: dropping %u bytes\n", + size - room); + if (!room) + return 0; + + tty_insert_flip_string(tport, sg_virt(&priv->sg_rx), size); + + port->icount.rx += room; + + return room; +} + +static void pch_free_dma(struct uart_port *port) +{ + struct eg20t_port *priv; + priv = container_of(port, struct eg20t_port, port); + + if (priv->chan_tx) { + dma_release_channel(priv->chan_tx); + priv->chan_tx = NULL; + } + if (priv->chan_rx) { + dma_release_channel(priv->chan_rx); + priv->chan_rx = NULL; + } + + if (priv->rx_buf_dma) { + dma_free_coherent(port->dev, port->fifosize, priv->rx_buf_virt, + priv->rx_buf_dma); + priv->rx_buf_virt = NULL; + priv->rx_buf_dma = 0; + } + + return; +} + +static bool filter(struct dma_chan *chan, void *slave) +{ + struct pch_dma_slave *param = slave; + + if ((chan->chan_id == param->chan_id) && (param->dma_dev == + chan->device->dev)) { + chan->private = param; + return true; + } else { + return false; + } +} + +static void pch_request_dma(struct uart_port *port) +{ + dma_cap_mask_t mask; + struct dma_chan *chan; + struct pci_dev *dma_dev; + struct pch_dma_slave *param; + struct eg20t_port *priv = + container_of(port, struct eg20t_port, port); + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + /* Get DMA's dev information */ + dma_dev = pci_get_slot(priv->pdev->bus, + PCI_DEVFN(PCI_SLOT(priv->pdev->devfn), 0)); + + /* Set Tx DMA */ + param = &priv->param_tx; + param->dma_dev = &dma_dev->dev; + param->chan_id = priv->port.line * 2; /* Tx = 0, 2, 4, ... */ + + param->tx_reg = port->mapbase + UART_TX; + chan = dma_request_channel(mask, filter, param); + if (!chan) { + dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Tx)\n", + __func__); + pci_dev_put(dma_dev); + return; + } + priv->chan_tx = chan; + + /* Set Rx DMA */ + param = &priv->param_rx; + param->dma_dev = &dma_dev->dev; + param->chan_id = priv->port.line * 2 + 1; /* Rx = Tx + 1 */ + + param->rx_reg = port->mapbase + UART_RX; + chan = dma_request_channel(mask, filter, param); + if (!chan) { + dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Rx)\n", + __func__); + dma_release_channel(priv->chan_tx); + priv->chan_tx = NULL; + pci_dev_put(dma_dev); + return; + } + + /* Get Consistent memory for DMA */ + priv->rx_buf_virt = dma_alloc_coherent(port->dev, port->fifosize, + &priv->rx_buf_dma, GFP_KERNEL); + priv->chan_rx = chan; + + pci_dev_put(dma_dev); +} + +static void pch_dma_rx_complete(void *arg) +{ + struct eg20t_port *priv = arg; + struct uart_port *port = &priv->port; + int count; + + dma_sync_sg_for_cpu(port->dev, &priv->sg_rx, 1, DMA_FROM_DEVICE); + count = dma_push_rx(priv, priv->trigger_level); + if (count) + tty_flip_buffer_push(&port->state->port); + async_tx_ack(priv->desc_rx); + pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT | + PCH_UART_HAL_RX_ERR_INT); +} + +static void pch_dma_tx_complete(void *arg) +{ + struct eg20t_port *priv = arg; + struct uart_port *port = &priv->port; + struct circ_buf *xmit = &port->state->xmit; + struct scatterlist *sg = priv->sg_tx_p; + int i; + + for (i = 0; i < priv->nent; i++, sg++) { + xmit->tail += sg_dma_len(sg); + port->icount.tx += sg_dma_len(sg); + } + xmit->tail &= UART_XMIT_SIZE - 1; + async_tx_ack(priv->desc_tx); + dma_unmap_sg(port->dev, priv->sg_tx_p, priv->orig_nent, DMA_TO_DEVICE); + priv->tx_dma_use = 0; + priv->nent = 0; + priv->orig_nent = 0; + kfree(priv->sg_tx_p); + pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT); +} + +static int pop_tx(struct eg20t_port *priv, int size) +{ + int count = 0; + struct uart_port *port = &priv->port; + struct circ_buf *xmit = &port->state->xmit; + + if (uart_tx_stopped(port) || uart_circ_empty(xmit) || count >= size) + goto pop_tx_end; + + do { + int cnt_to_end = + CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); + int sz = min(size - count, cnt_to_end); + pch_uart_hal_write(priv, &xmit->buf[xmit->tail], sz); + xmit->tail = (xmit->tail + sz) & (UART_XMIT_SIZE - 1); + count += sz; + } while (!uart_circ_empty(xmit) && count < size); + +pop_tx_end: + dev_dbg(priv->port.dev, "%d characters. Remained %d characters.(%lu)\n", + count, size - count, jiffies); + + return count; +} + +static int handle_rx_to(struct eg20t_port *priv) +{ + struct pch_uart_buffer *buf; + int rx_size; + int ret; + if (!priv->start_rx) { + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT | + PCH_UART_HAL_RX_ERR_INT); + return 0; + } + buf = &priv->rxbuf; + do { + rx_size = pch_uart_hal_read(priv, buf->buf, buf->size); + ret = push_rx(priv, buf->buf, rx_size); + if (ret) + return 0; + } while (rx_size == buf->size); + + return PCH_UART_HANDLED_RX_INT; +} + +static int handle_rx(struct eg20t_port *priv) +{ + return handle_rx_to(priv); +} + +static int dma_handle_rx(struct eg20t_port *priv) +{ + struct uart_port *port = &priv->port; + struct dma_async_tx_descriptor *desc; + struct scatterlist *sg; + + priv = container_of(port, struct eg20t_port, port); + sg = &priv->sg_rx; + + sg_init_table(&priv->sg_rx, 1); /* Initialize SG table */ + + sg_dma_len(sg) = priv->trigger_level; + + sg_set_page(&priv->sg_rx, virt_to_page(priv->rx_buf_virt), + sg_dma_len(sg), offset_in_page(priv->rx_buf_virt)); + + sg_dma_address(sg) = priv->rx_buf_dma; + + desc = dmaengine_prep_slave_sg(priv->chan_rx, + sg, 1, DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + + if (!desc) + return 0; + + priv->desc_rx = desc; + desc->callback = pch_dma_rx_complete; + desc->callback_param = priv; + desc->tx_submit(desc); + dma_async_issue_pending(priv->chan_rx); + + return PCH_UART_HANDLED_RX_INT; +} + +static unsigned int handle_tx(struct eg20t_port *priv) +{ + struct uart_port *port = &priv->port; + struct circ_buf *xmit = &port->state->xmit; + int fifo_size; + int tx_size; + int size; + int tx_empty; + + if (!priv->start_tx) { + dev_info(priv->port.dev, "%s:Tx isn't started. (%lu)\n", + __func__, jiffies); + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); + priv->tx_empty = 1; + return 0; + } + + fifo_size = max(priv->fifo_size, 1); + tx_empty = 1; + if (port->x_char) { + pch_uart_hal_write(priv, &port->x_char, 1); + port->icount.tx++; + port->x_char = 0; + tx_empty = 0; + fifo_size--; + } + size = min(xmit->head - xmit->tail, fifo_size); + if (size < 0) + size = fifo_size; + + tx_size = pop_tx(priv, size); + if (tx_size > 0) { + port->icount.tx += tx_size; + tx_empty = 0; + } + + priv->tx_empty = tx_empty; + + if (tx_empty) { + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); + uart_write_wakeup(port); + } + + return PCH_UART_HANDLED_TX_INT; +} + +static unsigned int dma_handle_tx(struct eg20t_port *priv) +{ + struct uart_port *port = &priv->port; + struct circ_buf *xmit = &port->state->xmit; + struct scatterlist *sg; + int nent; + int fifo_size; + struct dma_async_tx_descriptor *desc; + int num; + int i; + int bytes; + int size; + int rem; + + if (!priv->start_tx) { + dev_info(priv->port.dev, "%s:Tx isn't started. (%lu)\n", + __func__, jiffies); + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); + priv->tx_empty = 1; + return 0; + } + + if (priv->tx_dma_use) { + dev_dbg(priv->port.dev, "%s:Tx is not completed. (%lu)\n", + __func__, jiffies); + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); + priv->tx_empty = 1; + return 0; + } + + fifo_size = max(priv->fifo_size, 1); + + if (port->x_char) { + pch_uart_hal_write(priv, &port->x_char, 1); + port->icount.tx++; + port->x_char = 0; + fifo_size--; + } + + bytes = min((int)CIRC_CNT(xmit->head, xmit->tail, + UART_XMIT_SIZE), CIRC_CNT_TO_END(xmit->head, + xmit->tail, UART_XMIT_SIZE)); + if (!bytes) { + dev_dbg(priv->port.dev, "%s 0 bytes return\n", __func__); + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); + uart_write_wakeup(port); + return 0; + } + + if (bytes > fifo_size) { + num = bytes / fifo_size + 1; + size = fifo_size; + rem = bytes % fifo_size; + } else { + num = 1; + size = bytes; + rem = bytes; + } + + dev_dbg(priv->port.dev, "%s num=%d size=%d rem=%d\n", + __func__, num, size, rem); + + priv->tx_dma_use = 1; + + priv->sg_tx_p = kmalloc_array(num, sizeof(struct scatterlist), GFP_ATOMIC); + if (!priv->sg_tx_p) { + dev_err(priv->port.dev, "%s:kzalloc Failed\n", __func__); + return 0; + } + + sg_init_table(priv->sg_tx_p, num); /* Initialize SG table */ + sg = priv->sg_tx_p; + + for (i = 0; i < num; i++, sg++) { + if (i == (num - 1)) + sg_set_page(sg, virt_to_page(xmit->buf), + rem, fifo_size * i); + else + sg_set_page(sg, virt_to_page(xmit->buf), + size, fifo_size * i); + } + + sg = priv->sg_tx_p; + nent = dma_map_sg(port->dev, sg, num, DMA_TO_DEVICE); + if (!nent) { + dev_err(priv->port.dev, "%s:dma_map_sg Failed\n", __func__); + return 0; + } + priv->orig_nent = num; + priv->nent = nent; + + for (i = 0; i < nent; i++, sg++) { + sg->offset = (xmit->tail & (UART_XMIT_SIZE - 1)) + + fifo_size * i; + sg_dma_address(sg) = (sg_dma_address(sg) & + ~(UART_XMIT_SIZE - 1)) + sg->offset; + if (i == (nent - 1)) + sg_dma_len(sg) = rem; + else + sg_dma_len(sg) = size; + } + + desc = dmaengine_prep_slave_sg(priv->chan_tx, + priv->sg_tx_p, nent, DMA_MEM_TO_DEV, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) { + dev_err(priv->port.dev, "%s:dmaengine_prep_slave_sg Failed\n", + __func__); + return 0; + } + dma_sync_sg_for_device(port->dev, priv->sg_tx_p, nent, DMA_TO_DEVICE); + priv->desc_tx = desc; + desc->callback = pch_dma_tx_complete; + desc->callback_param = priv; + + desc->tx_submit(desc); + + dma_async_issue_pending(priv->chan_tx); + + return PCH_UART_HANDLED_TX_INT; +} + +static void pch_uart_err_ir(struct eg20t_port *priv, unsigned int lsr) +{ + struct uart_port *port = &priv->port; + struct tty_struct *tty = tty_port_tty_get(&port->state->port); + char *error_msg[5] = {}; + int i = 0; + + if (lsr & PCH_UART_LSR_ERR) + error_msg[i++] = "Error data in FIFO\n"; + + if (lsr & UART_LSR_FE) { + port->icount.frame++; + error_msg[i++] = " Framing Error\n"; + } + + if (lsr & UART_LSR_PE) { + port->icount.parity++; + error_msg[i++] = " Parity Error\n"; + } + + if (lsr & UART_LSR_OE) { + port->icount.overrun++; + error_msg[i++] = " Overrun Error\n"; + } + + if (tty == NULL) { + for (i = 0; error_msg[i] != NULL; i++) + dev_err(&priv->pdev->dev, error_msg[i]); + } else { + tty_kref_put(tty); + } +} + +static irqreturn_t pch_uart_interrupt(int irq, void *dev_id) +{ + struct eg20t_port *priv = dev_id; + unsigned int handled; + u8 lsr; + int ret = 0; + unsigned char iid; + unsigned long flags; + int next = 1; + u8 msr; + + spin_lock_irqsave(&priv->lock, flags); + handled = 0; + while (next) { + iid = pch_uart_hal_get_iid(priv); + if (iid & PCH_UART_IIR_IP) /* No Interrupt */ + break; + switch (iid) { + case PCH_UART_IID_RLS: /* Receiver Line Status */ + lsr = pch_uart_hal_get_line_status(priv); + if (lsr & (PCH_UART_LSR_ERR | UART_LSR_FE | + UART_LSR_PE | UART_LSR_OE)) { + pch_uart_err_ir(priv, lsr); + ret = PCH_UART_HANDLED_RX_ERR_INT; + } else { + ret = PCH_UART_HANDLED_LS_INT; + } + break; + case PCH_UART_IID_RDR: /* Received Data Ready */ + if (priv->use_dma) { + pch_uart_hal_disable_interrupt(priv, + PCH_UART_HAL_RX_INT | + PCH_UART_HAL_RX_ERR_INT); + ret = dma_handle_rx(priv); + if (!ret) + pch_uart_hal_enable_interrupt(priv, + PCH_UART_HAL_RX_INT | + PCH_UART_HAL_RX_ERR_INT); + } else { + ret = handle_rx(priv); + } + break; + case PCH_UART_IID_RDR_TO: /* Received Data Ready + (FIFO Timeout) */ + ret = handle_rx_to(priv); + break; + case PCH_UART_IID_THRE: /* Transmitter Holding Register + Empty */ + if (priv->use_dma) + ret = dma_handle_tx(priv); + else + ret = handle_tx(priv); + break; + case PCH_UART_IID_MS: /* Modem Status */ + msr = pch_uart_hal_get_modem(priv); + next = 0; /* MS ir prioirty is the lowest. So, MS ir + means final interrupt */ + if ((msr & UART_MSR_ANY_DELTA) == 0) + break; + ret |= PCH_UART_HANDLED_MS_INT; + break; + default: /* Never junp to this label */ + dev_err(priv->port.dev, "%s:iid=%02x (%lu)\n", __func__, + iid, jiffies); + ret = -1; + next = 0; + break; + } + handled |= (unsigned int)ret; + } + + spin_unlock_irqrestore(&priv->lock, flags); + return IRQ_RETVAL(handled); +} + +/* This function tests whether the transmitter fifo and shifter for the port + described by 'port' is empty. */ +static unsigned int pch_uart_tx_empty(struct uart_port *port) +{ + struct eg20t_port *priv; + + priv = container_of(port, struct eg20t_port, port); + if (priv->tx_empty) + return TIOCSER_TEMT; + else + return 0; +} + +/* Returns the current state of modem control inputs. */ +static unsigned int pch_uart_get_mctrl(struct uart_port *port) +{ + struct eg20t_port *priv; + u8 modem; + unsigned int ret = 0; + + priv = container_of(port, struct eg20t_port, port); + modem = pch_uart_hal_get_modem(priv); + + if (modem & UART_MSR_DCD) + ret |= TIOCM_CAR; + + if (modem & UART_MSR_RI) + ret |= TIOCM_RNG; + + if (modem & UART_MSR_DSR) + ret |= TIOCM_DSR; + + if (modem & UART_MSR_CTS) + ret |= TIOCM_CTS; + + return ret; +} + +static void pch_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + u32 mcr = 0; + struct eg20t_port *priv = container_of(port, struct eg20t_port, port); + + if (mctrl & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (mctrl & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (mctrl & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + if (priv->mcr & UART_MCR_AFE) + mcr |= UART_MCR_AFE; + + if (mctrl) + iowrite8(mcr, priv->membase + UART_MCR); +} + +static void pch_uart_stop_tx(struct uart_port *port) +{ + struct eg20t_port *priv; + priv = container_of(port, struct eg20t_port, port); + priv->start_tx = 0; + priv->tx_dma_use = 0; +} + +static void pch_uart_start_tx(struct uart_port *port) +{ + struct eg20t_port *priv; + + priv = container_of(port, struct eg20t_port, port); + + if (priv->use_dma) { + if (priv->tx_dma_use) { + dev_dbg(priv->port.dev, "%s : Tx DMA is NOT empty.\n", + __func__); + return; + } + } + + priv->start_tx = 1; + pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT); +} + +static void pch_uart_stop_rx(struct uart_port *port) +{ + struct eg20t_port *priv; + priv = container_of(port, struct eg20t_port, port); + priv->start_rx = 0; + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT | + PCH_UART_HAL_RX_ERR_INT); +} + +/* Enable the modem status interrupts. */ +static void pch_uart_enable_ms(struct uart_port *port) +{ + struct eg20t_port *priv; + priv = container_of(port, struct eg20t_port, port); + pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_MS_INT); +} + +/* Control the transmission of a break signal. */ +static void pch_uart_break_ctl(struct uart_port *port, int ctl) +{ + struct eg20t_port *priv; + unsigned long flags; + + priv = container_of(port, struct eg20t_port, port); + spin_lock_irqsave(&priv->lock, flags); + pch_uart_hal_set_break(priv, ctl); + spin_unlock_irqrestore(&priv->lock, flags); +} + +/* Grab any interrupt resources and initialise any low level driver state. */ +static int pch_uart_startup(struct uart_port *port) +{ + struct eg20t_port *priv; + int ret; + int fifo_size; + int trigger_level; + + priv = container_of(port, struct eg20t_port, port); + priv->tx_empty = 1; + + if (port->uartclk) + priv->uartclk = port->uartclk; + else + port->uartclk = priv->uartclk; + + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT); + ret = pch_uart_hal_set_line(priv, default_baud, + PCH_UART_HAL_PARITY_NONE, PCH_UART_HAL_8BIT, + PCH_UART_HAL_STB1); + if (ret) + return ret; + + switch (priv->fifo_size) { + case 256: + fifo_size = PCH_UART_HAL_FIFO256; + break; + case 64: + fifo_size = PCH_UART_HAL_FIFO64; + break; + case 16: + fifo_size = PCH_UART_HAL_FIFO16; + break; + case 1: + default: + fifo_size = PCH_UART_HAL_FIFO_DIS; + break; + } + + switch (priv->trigger) { + case PCH_UART_HAL_TRIGGER1: + trigger_level = 1; + break; + case PCH_UART_HAL_TRIGGER_L: + trigger_level = priv->fifo_size / 4; + break; + case PCH_UART_HAL_TRIGGER_M: + trigger_level = priv->fifo_size / 2; + break; + case PCH_UART_HAL_TRIGGER_H: + default: + trigger_level = priv->fifo_size - (priv->fifo_size / 8); + break; + } + + priv->trigger_level = trigger_level; + ret = pch_uart_hal_set_fifo(priv, PCH_UART_HAL_DMA_MODE0, + fifo_size, priv->trigger); + if (ret < 0) + return ret; + + ret = request_irq(priv->port.irq, pch_uart_interrupt, IRQF_SHARED, + priv->irq_name, priv); + if (ret < 0) + return ret; + + if (priv->use_dma) + pch_request_dma(port); + + priv->start_rx = 1; + pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT | + PCH_UART_HAL_RX_ERR_INT); + uart_update_timeout(port, CS8, default_baud); + + return 0; +} + +static void pch_uart_shutdown(struct uart_port *port) +{ + struct eg20t_port *priv; + int ret; + + priv = container_of(port, struct eg20t_port, port); + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT); + pch_uart_hal_fifo_reset(priv, PCH_UART_HAL_CLR_ALL_FIFO); + ret = pch_uart_hal_set_fifo(priv, PCH_UART_HAL_DMA_MODE0, + PCH_UART_HAL_FIFO_DIS, PCH_UART_HAL_TRIGGER1); + if (ret) + dev_err(priv->port.dev, + "pch_uart_hal_set_fifo Failed(ret=%d)\n", ret); + + pch_free_dma(port); + + free_irq(priv->port.irq, priv); +} + +/* Change the port parameters, including word length, parity, stop + *bits. Update read_status_mask and ignore_status_mask to indicate + *the types of events we are interested in receiving. */ +static void pch_uart_set_termios(struct uart_port *port, + struct ktermios *termios, struct ktermios *old) +{ + int rtn; + unsigned int baud, parity, bits, stb; + struct eg20t_port *priv; + unsigned long flags; + + priv = container_of(port, struct eg20t_port, port); + switch (termios->c_cflag & CSIZE) { + case CS5: + bits = PCH_UART_HAL_5BIT; + break; + case CS6: + bits = PCH_UART_HAL_6BIT; + break; + case CS7: + bits = PCH_UART_HAL_7BIT; + break; + default: /* CS8 */ + bits = PCH_UART_HAL_8BIT; + break; + } + if (termios->c_cflag & CSTOPB) + stb = PCH_UART_HAL_STB2; + else + stb = PCH_UART_HAL_STB1; + + if (termios->c_cflag & PARENB) { + if (termios->c_cflag & PARODD) + parity = PCH_UART_HAL_PARITY_ODD; + else + parity = PCH_UART_HAL_PARITY_EVEN; + + } else + parity = PCH_UART_HAL_PARITY_NONE; + + /* Only UART0 has auto hardware flow function */ + if ((termios->c_cflag & CRTSCTS) && (priv->fifo_size == 256)) + priv->mcr |= UART_MCR_AFE; + else + priv->mcr &= ~UART_MCR_AFE; + + termios->c_cflag &= ~CMSPAR; /* Mark/Space parity is not supported */ + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); + + spin_lock_irqsave(&priv->lock, flags); + spin_lock(&port->lock); + + uart_update_timeout(port, termios->c_cflag, baud); + rtn = pch_uart_hal_set_line(priv, baud, parity, bits, stb); + if (rtn) + goto out; + + pch_uart_set_mctrl(&priv->port, priv->port.mctrl); + /* Don't rewrite B0 */ + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, baud, baud); + +out: + spin_unlock(&port->lock); + spin_unlock_irqrestore(&priv->lock, flags); +} + +static const char *pch_uart_type(struct uart_port *port) +{ + return KBUILD_MODNAME; +} + +static void pch_uart_release_port(struct uart_port *port) +{ + struct eg20t_port *priv; + + priv = container_of(port, struct eg20t_port, port); + pci_iounmap(priv->pdev, priv->membase); + pci_release_regions(priv->pdev); +} + +static int pch_uart_request_port(struct uart_port *port) +{ + struct eg20t_port *priv; + int ret; + void __iomem *membase; + + priv = container_of(port, struct eg20t_port, port); + ret = pci_request_regions(priv->pdev, KBUILD_MODNAME); + if (ret < 0) + return -EBUSY; + + membase = pci_iomap(priv->pdev, 1, 0); + if (!membase) { + pci_release_regions(priv->pdev); + return -EBUSY; + } + priv->membase = port->membase = membase; + + return 0; +} + +static void pch_uart_config_port(struct uart_port *port, int type) +{ + struct eg20t_port *priv; + + priv = container_of(port, struct eg20t_port, port); + if (type & UART_CONFIG_TYPE) { + port->type = priv->port_type; + pch_uart_request_port(port); + } +} + +static int pch_uart_verify_port(struct uart_port *port, + struct serial_struct *serinfo) +{ + struct eg20t_port *priv; + + priv = container_of(port, struct eg20t_port, port); + if (serinfo->flags & UPF_LOW_LATENCY) { + dev_info(priv->port.dev, + "PCH UART : Use PIO Mode (without DMA)\n"); + priv->use_dma = 0; + serinfo->flags &= ~UPF_LOW_LATENCY; + } else { +#ifndef CONFIG_PCH_DMA + dev_err(priv->port.dev, "%s : PCH DMA is not Loaded.\n", + __func__); + return -EOPNOTSUPP; +#endif + if (!priv->use_dma) { + pch_request_dma(port); + if (priv->chan_rx) + priv->use_dma = 1; + } + dev_info(priv->port.dev, "PCH UART: %s\n", + priv->use_dma ? + "Use DMA Mode" : "No DMA"); + } + + return 0; +} + +#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_PCH_UART_CONSOLE) +/* + * Wait for transmitter & holding register to empty + */ +static void wait_for_xmitr(struct eg20t_port *up, int bits) +{ + unsigned int status, tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + for (;;) { + status = ioread8(up->membase + UART_LSR); + + if ((status & bits) == bits) + break; + if (--tmout == 0) + break; + udelay(1); + } + + /* Wait up to 1s for flow control if necessary */ + if (up->port.flags & UPF_CONS_FLOW) { + unsigned int tmout; + for (tmout = 1000000; tmout; tmout--) { + unsigned int msr = ioread8(up->membase + UART_MSR); + if (msr & UART_MSR_CTS) + break; + udelay(1); + touch_nmi_watchdog(); + } + } +} +#endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_PCH_UART_CONSOLE */ + +#ifdef CONFIG_CONSOLE_POLL +/* + * Console polling routines for communicate via uart while + * in an interrupt or debug context. + */ +static int pch_uart_get_poll_char(struct uart_port *port) +{ + struct eg20t_port *priv = + container_of(port, struct eg20t_port, port); + u8 lsr = ioread8(priv->membase + UART_LSR); + + if (!(lsr & UART_LSR_DR)) + return NO_POLL_CHAR; + + return ioread8(priv->membase + PCH_UART_RBR); +} + + +static void pch_uart_put_poll_char(struct uart_port *port, + unsigned char c) +{ + unsigned int ier; + struct eg20t_port *priv = + container_of(port, struct eg20t_port, port); + + /* + * First save the IER then disable the interrupts + */ + ier = ioread8(priv->membase + UART_IER); + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT); + + wait_for_xmitr(priv, UART_LSR_THRE); + /* + * Send the character out. + */ + iowrite8(c, priv->membase + PCH_UART_THR); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(priv, BOTH_EMPTY); + iowrite8(ier, priv->membase + UART_IER); +} +#endif /* CONFIG_CONSOLE_POLL */ + +static const struct uart_ops pch_uart_ops = { + .tx_empty = pch_uart_tx_empty, + .set_mctrl = pch_uart_set_mctrl, + .get_mctrl = pch_uart_get_mctrl, + .stop_tx = pch_uart_stop_tx, + .start_tx = pch_uart_start_tx, + .stop_rx = pch_uart_stop_rx, + .enable_ms = pch_uart_enable_ms, + .break_ctl = pch_uart_break_ctl, + .startup = pch_uart_startup, + .shutdown = pch_uart_shutdown, + .set_termios = pch_uart_set_termios, +/* .pm = pch_uart_pm, Not supported yet */ + .type = pch_uart_type, + .release_port = pch_uart_release_port, + .request_port = pch_uart_request_port, + .config_port = pch_uart_config_port, + .verify_port = pch_uart_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = pch_uart_get_poll_char, + .poll_put_char = pch_uart_put_poll_char, +#endif +}; + +#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE + +static void pch_console_putchar(struct uart_port *port, int ch) +{ + struct eg20t_port *priv = + container_of(port, struct eg20t_port, port); + + wait_for_xmitr(priv, UART_LSR_THRE); + iowrite8(ch, priv->membase + PCH_UART_THR); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console_lock must be held when we get here. + */ +static void +pch_console_write(struct console *co, const char *s, unsigned int count) +{ + struct eg20t_port *priv; + unsigned long flags; + int priv_locked = 1; + int port_locked = 1; + u8 ier; + + priv = pch_uart_ports[co->index]; + + touch_nmi_watchdog(); + + local_irq_save(flags); + if (priv->port.sysrq) { + /* call to uart_handle_sysrq_char already took the priv lock */ + priv_locked = 0; + /* serial8250_handle_port() already took the port lock */ + port_locked = 0; + } else if (oops_in_progress) { + priv_locked = spin_trylock(&priv->lock); + port_locked = spin_trylock(&priv->port.lock); + } else { + spin_lock(&priv->lock); + spin_lock(&priv->port.lock); + } + + /* + * First save the IER then disable the interrupts + */ + ier = ioread8(priv->membase + UART_IER); + + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT); + + uart_console_write(&priv->port, s, count, pch_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(priv, BOTH_EMPTY); + iowrite8(ier, priv->membase + UART_IER); + + if (port_locked) + spin_unlock(&priv->port.lock); + if (priv_locked) + spin_unlock(&priv->lock); + local_irq_restore(flags); +} + +static int __init pch_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = default_baud; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= PCH_UART_NR) + co->index = 0; + port = &pch_uart_ports[co->index]->port; + + if (!port || (!port->iobase && !port->membase)) + return -ENODEV; + + port->uartclk = pch_uart_get_uartclk(); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver pch_uart_driver; + +static struct console pch_console = { + .name = PCH_UART_DRIVER_DEVICE, + .write = pch_console_write, + .device = uart_console_device, + .setup = pch_console_setup, + .flags = CON_PRINTBUFFER | CON_ANYTIME, + .index = -1, + .data = &pch_uart_driver, +}; + +#define PCH_CONSOLE (&pch_console) +#else +#define PCH_CONSOLE NULL +#endif /* CONFIG_SERIAL_PCH_UART_CONSOLE */ + +static struct uart_driver pch_uart_driver = { + .owner = THIS_MODULE, + .driver_name = KBUILD_MODNAME, + .dev_name = PCH_UART_DRIVER_DEVICE, + .major = 0, + .minor = 0, + .nr = PCH_UART_NR, + .cons = PCH_CONSOLE, +}; + +static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct eg20t_port *priv; + int ret; + unsigned int iobase; + unsigned int mapbase; + unsigned char *rxbuf; + int fifosize; + int port_type; + struct pch_uart_driver_data *board; +#ifdef CONFIG_DEBUG_FS + char name[32]; /* for debugfs file name */ +#endif + + board = &drv_dat[id->driver_data]; + port_type = board->port_type; + + priv = kzalloc(sizeof(struct eg20t_port), GFP_KERNEL); + if (priv == NULL) + goto init_port_alloc_err; + + rxbuf = (unsigned char *)__get_free_page(GFP_KERNEL); + if (!rxbuf) + goto init_port_free_txbuf; + + switch (port_type) { + case PORT_PCH_8LINE: + fifosize = 256; /* EG20T/ML7213: UART0 */ + break; + case PORT_PCH_2LINE: + fifosize = 64; /* EG20T:UART1~3 ML7213: UART1~2*/ + break; + default: + dev_err(&pdev->dev, "Invalid Port Type(=%d)\n", port_type); + goto init_port_hal_free; + } + + pci_enable_msi(pdev); + pci_set_master(pdev); + + spin_lock_init(&priv->lock); + + iobase = pci_resource_start(pdev, 0); + mapbase = pci_resource_start(pdev, 1); + priv->mapbase = mapbase; + priv->iobase = iobase; + priv->pdev = pdev; + priv->tx_empty = 1; + priv->rxbuf.buf = rxbuf; + priv->rxbuf.size = PAGE_SIZE; + + priv->fifo_size = fifosize; + priv->uartclk = pch_uart_get_uartclk(); + priv->port_type = port_type; + priv->port.dev = &pdev->dev; + priv->port.iobase = iobase; + priv->port.membase = NULL; + priv->port.mapbase = mapbase; + priv->port.irq = pdev->irq; + priv->port.iotype = UPIO_PORT; + priv->port.ops = &pch_uart_ops; + priv->port.flags = UPF_BOOT_AUTOCONF; + priv->port.fifosize = fifosize; + priv->port.line = board->line_no; + priv->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_PCH_UART_CONSOLE); + priv->trigger = PCH_UART_HAL_TRIGGER_M; + + snprintf(priv->irq_name, IRQ_NAME_SIZE, + KBUILD_MODNAME ":" PCH_UART_DRIVER_DEVICE "%d", + priv->port.line); + + spin_lock_init(&priv->port.lock); + + pci_set_drvdata(pdev, priv); + priv->trigger_level = 1; + priv->fcr = 0; + + if (pdev->dev.of_node) + of_property_read_u32(pdev->dev.of_node, "clock-frequency" + , &user_uartclk); + +#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE + pch_uart_ports[board->line_no] = priv; +#endif + ret = uart_add_one_port(&pch_uart_driver, &priv->port); + if (ret < 0) + goto init_port_hal_free; + +#ifdef CONFIG_DEBUG_FS + snprintf(name, sizeof(name), "uart%d_regs", board->line_no); + priv->debugfs = debugfs_create_file(name, S_IFREG | S_IRUGO, + NULL, priv, &port_regs_ops); +#endif + + return priv; + +init_port_hal_free: +#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE + pch_uart_ports[board->line_no] = NULL; +#endif + free_page((unsigned long)rxbuf); +init_port_free_txbuf: + kfree(priv); +init_port_alloc_err: + + return NULL; +} + +static void pch_uart_exit_port(struct eg20t_port *priv) +{ + +#ifdef CONFIG_DEBUG_FS + debugfs_remove(priv->debugfs); +#endif + uart_remove_one_port(&pch_uart_driver, &priv->port); + free_page((unsigned long)priv->rxbuf.buf); +} + +static void pch_uart_pci_remove(struct pci_dev *pdev) +{ + struct eg20t_port *priv = pci_get_drvdata(pdev); + + pci_disable_msi(pdev); + +#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE + pch_uart_ports[priv->port.line] = NULL; +#endif + pch_uart_exit_port(priv); + pci_disable_device(pdev); + kfree(priv); + return; +} + +static int __maybe_unused pch_uart_pci_suspend(struct device *dev) +{ + struct eg20t_port *priv = dev_get_drvdata(dev); + + uart_suspend_port(&pch_uart_driver, &priv->port); + + return 0; +} + +static int __maybe_unused pch_uart_pci_resume(struct device *dev) +{ + struct eg20t_port *priv = dev_get_drvdata(dev); + + uart_resume_port(&pch_uart_driver, &priv->port); + + return 0; +} + +static const struct pci_device_id pch_uart_pci_id[] = { + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8811), + .driver_data = pch_et20t_uart0}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8812), + .driver_data = pch_et20t_uart1}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8813), + .driver_data = pch_et20t_uart2}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8814), + .driver_data = pch_et20t_uart3}, + {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8027), + .driver_data = pch_ml7213_uart0}, + {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8028), + .driver_data = pch_ml7213_uart1}, + {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8029), + .driver_data = pch_ml7213_uart2}, + {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x800C), + .driver_data = pch_ml7223_uart0}, + {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x800D), + .driver_data = pch_ml7223_uart1}, + {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8811), + .driver_data = pch_ml7831_uart0}, + {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8812), + .driver_data = pch_ml7831_uart1}, + {0,}, +}; + +static int pch_uart_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + int ret; + struct eg20t_port *priv; + + ret = pci_enable_device(pdev); + if (ret < 0) + goto probe_error; + + priv = pch_uart_init_port(pdev, id); + if (!priv) { + ret = -EBUSY; + goto probe_disable_device; + } + pci_set_drvdata(pdev, priv); + + return ret; + +probe_disable_device: + pci_disable_msi(pdev); + pci_disable_device(pdev); +probe_error: + return ret; +} + +static SIMPLE_DEV_PM_OPS(pch_uart_pci_pm_ops, + pch_uart_pci_suspend, + pch_uart_pci_resume); + +static struct pci_driver pch_uart_pci_driver = { + .name = "pch_uart", + .id_table = pch_uart_pci_id, + .probe = pch_uart_pci_probe, + .remove = pch_uart_pci_remove, + .driver.pm = &pch_uart_pci_pm_ops, +}; + +static int __init pch_uart_module_init(void) +{ + int ret; + + /* register as UART driver */ + ret = uart_register_driver(&pch_uart_driver); + if (ret < 0) + return ret; + + /* register as PCI driver */ + ret = pci_register_driver(&pch_uart_pci_driver); + if (ret < 0) + uart_unregister_driver(&pch_uart_driver); + + return ret; +} +module_init(pch_uart_module_init); + +static void __exit pch_uart_module_exit(void) +{ + pci_unregister_driver(&pch_uart_pci_driver); + uart_unregister_driver(&pch_uart_driver); +} +module_exit(pch_uart_module_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Intel EG20T PCH UART PCI Driver"); +MODULE_DEVICE_TABLE(pci, pch_uart_pci_id); + +module_param(default_baud, uint, S_IRUGO); +MODULE_PARM_DESC(default_baud, + "Default BAUD for initial driver state and console (default 9600)"); +module_param(user_uartclk, uint, S_IRUGO); +MODULE_PARM_DESC(user_uartclk, + "Override UART default or board specific UART clock"); |