1 files changed, 583 insertions, 0 deletions
diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c
new file mode 100644
index 000000000..1371b0c24
--- /dev/null
+++ b/drivers/usb/host/ohci-da8xx.c
@@ -0,0 +1,583 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * TI DA8xx (OMAP-L1x) Bus Glue
+ *
+ * Derived from: ohci-omap.c and ohci-s3c2410.c
+ * Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/gpio/consumer.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_data/usb-davinci.h>
+#include <linux/regulator/consumer.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <asm/unaligned.h>
+
+#include "ohci.h"
+
+#define DRIVER_DESC "DA8XX"
+#define DRV_NAME "ohci-da8xx"
+
+static struct hc_driver __read_mostly ohci_da8xx_hc_driver;
+
+static int (*orig_ohci_hub_control)(struct usb_hcd  *hcd, u16 typeReq,
+			u16 wValue, u16 wIndex, char *buf, u16 wLength);
+static int (*orig_ohci_hub_status_data)(struct usb_hcd *hcd, char *buf);
+
+struct da8xx_ohci_hcd {
+	struct usb_hcd *hcd;
+	struct clk *usb11_clk;
+	struct phy *usb11_phy;
+	struct regulator *vbus_reg;
+	struct notifier_block nb;
+	struct gpio_desc *oc_gpio;
+};
+
+#define to_da8xx_ohci(hcd) (struct da8xx_ohci_hcd *)(hcd_to_ohci(hcd)->priv)
+
+/* Over-current indicator change bitmask */
+static volatile u16 ocic_mask;
+
+static int ohci_da8xx_enable(struct usb_hcd *hcd)
+{
+	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
+	int ret;
+
+	ret = clk_prepare_enable(da8xx_ohci->usb11_clk);
+	if (ret)
+		return ret;
+
+	ret = phy_init(da8xx_ohci->usb11_phy);
+	if (ret)
+		goto err_phy_init;
+
+	ret = phy_power_on(da8xx_ohci->usb11_phy);
+	if (ret)
+		goto err_phy_power_on;
+
+	return 0;
+
+err_phy_power_on:
+	phy_exit(da8xx_ohci->usb11_phy);
+err_phy_init:
+	clk_disable_unprepare(da8xx_ohci->usb11_clk);
+
+	return ret;
+}
+
+static void ohci_da8xx_disable(struct usb_hcd *hcd)
+{
+	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
+
+	phy_power_off(da8xx_ohci->usb11_phy);
+	phy_exit(da8xx_ohci->usb11_phy);
+	clk_disable_unprepare(da8xx_ohci->usb11_clk);
+}
+
+static int ohci_da8xx_set_power(struct usb_hcd *hcd, int on)
+{
+	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
+	struct device *dev = hcd->self.controller;
+	int ret;
+
+	if (!da8xx_ohci->vbus_reg)
+		return 0;
+
+	if (on) {
+		ret = regulator_enable(da8xx_ohci->vbus_reg);
+		if (ret) {
+			dev_err(dev, "Failed to enable regulator: %d\n", ret);
+			return ret;
+		}
+	} else {
+		ret = regulator_disable(da8xx_ohci->vbus_reg);
+		if (ret) {
+			dev_err(dev, "Failed  to disable regulator: %d\n", ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int ohci_da8xx_get_power(struct usb_hcd *hcd)
+{
+	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
+
+	if (da8xx_ohci->vbus_reg)
+		return regulator_is_enabled(da8xx_ohci->vbus_reg);
+
+	return 1;
+}
+
+static int ohci_da8xx_get_oci(struct usb_hcd *hcd)
+{
+	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
+	unsigned int flags;
+	int ret;
+
+	if (da8xx_ohci->oc_gpio)
+		return gpiod_get_value_cansleep(da8xx_ohci->oc_gpio);
+
+	if (!da8xx_ohci->vbus_reg)
+		return 0;
+
+	ret = regulator_get_error_flags(da8xx_ohci->vbus_reg, &flags);
+	if (ret)
+		return ret;
+
+	if (flags & REGULATOR_ERROR_OVER_CURRENT)
+		return 1;
+
+	return 0;
+}
+
+static int ohci_da8xx_has_set_power(struct usb_hcd *hcd)
+{
+	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
+
+	if (da8xx_ohci->vbus_reg)
+		return 1;
+
+	return 0;
+}
+
+static int ohci_da8xx_has_oci(struct usb_hcd *hcd)
+{
+	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
+
+	if (da8xx_ohci->oc_gpio)
+		return 1;
+
+	if (da8xx_ohci->vbus_reg)
+		return 1;
+
+	return 0;
+}
+
+static int ohci_da8xx_has_potpgt(struct usb_hcd *hcd)
+{
+	struct device *dev		= hcd->self.controller;
+	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
+
+	if (hub && hub->potpgt)
+		return 1;
+
+	return 0;
+}
+
+static int ohci_da8xx_regulator_event(struct notifier_block *nb,
+				unsigned long event, void *data)
+{
+	struct da8xx_ohci_hcd *da8xx_ohci =
+				container_of(nb, struct da8xx_ohci_hcd, nb);
+
+	if (event & REGULATOR_EVENT_OVER_CURRENT) {
+		ocic_mask |= 1 << 1;
+		ohci_da8xx_set_power(da8xx_ohci->hcd, 0);
+	}
+
+	return 0;
+}
+
+static irqreturn_t ohci_da8xx_oc_thread(int irq, void *data)
+{
+	struct da8xx_ohci_hcd *da8xx_ohci = data;
+	struct device *dev = da8xx_ohci->hcd->self.controller;
+	int ret;
+
+	if (gpiod_get_value_cansleep(da8xx_ohci->oc_gpio) &&
+	    da8xx_ohci->vbus_reg) {
+		ret = regulator_disable(da8xx_ohci->vbus_reg);
+		if (ret)
+			dev_err(dev, "Failed to disable regulator: %d\n", ret);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int ohci_da8xx_register_notify(struct usb_hcd *hcd)
+{
+	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
+	struct device *dev		= hcd->self.controller;
+	int ret = 0;
+
+	if (!da8xx_ohci->oc_gpio && da8xx_ohci->vbus_reg) {
+		da8xx_ohci->nb.notifier_call = ohci_da8xx_regulator_event;
+		ret = devm_regulator_register_notifier(da8xx_ohci->vbus_reg,
+						&da8xx_ohci->nb);
+	}
+
+	if (ret)
+		dev_err(dev, "Failed to register notifier: %d\n", ret);
+
+	return ret;
+}
+
+static int ohci_da8xx_reset(struct usb_hcd *hcd)
+{
+	struct device *dev		= hcd->self.controller;
+	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
+	struct ohci_hcd	*ohci		= hcd_to_ohci(hcd);
+	int result;
+	u32 rh_a;
+
+	dev_dbg(dev, "starting USB controller\n");
+
+	result = ohci_da8xx_enable(hcd);
+	if (result < 0)
+		return result;
+
+	/*
+	 * DA8xx only have 1 port connected to the pins but the HC root hub
+	 * register A reports 2 ports, thus we'll have to override it...
+	 */
+	ohci->num_ports = 1;
+
+	result = ohci_setup(hcd);
+	if (result < 0) {
+		ohci_da8xx_disable(hcd);
+		return result;
+	}
+
+	/*
+	 * Since we're providing a board-specific root hub port power control
+	 * and over-current reporting, we have to override the HC root hub A
+	 * register's default value, so that ohci_hub_control() could return
+	 * the correct hub descriptor...
+	 */
+	rh_a = ohci_readl(ohci, &ohci->regs->roothub.a);
+	if (ohci_da8xx_has_set_power(hcd)) {
+		rh_a &= ~RH_A_NPS;
+		rh_a |=  RH_A_PSM;
+	}
+	if (ohci_da8xx_has_oci(hcd)) {
+		rh_a &= ~RH_A_NOCP;
+		rh_a |=  RH_A_OCPM;
+	}
+	if (ohci_da8xx_has_potpgt(hcd)) {
+		rh_a &= ~RH_A_POTPGT;
+		rh_a |= hub->potpgt << 24;
+	}
+	ohci_writel(ohci, rh_a, &ohci->regs->roothub.a);
+
+	return result;
+}
+
+/*
+ * Update the status data from the hub with the over-current indicator change.
+ */
+static int ohci_da8xx_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	int length		= orig_ohci_hub_status_data(hcd, buf);
+
+	/* See if we have OCIC bit set on port 1 */
+	if (ocic_mask & (1 << 1)) {
+		dev_dbg(hcd->self.controller, "over-current indicator change "
+			"on port 1\n");
+
+		if (!length)
+			length = 1;
+
+		buf[0] |= 1 << 1;
+	}
+	return length;
+}
+
+/*
+ * Look at the control requests to the root hub and see if we need to override.
+ */
+static int ohci_da8xx_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+				  u16 wIndex, char *buf, u16 wLength)
+{
+	struct device *dev		= hcd->self.controller;
+	int temp;
+
+	switch (typeReq) {
+	case GetPortStatus:
+		/* Check the port number */
+		if (wIndex != 1)
+			break;
+
+		dev_dbg(dev, "GetPortStatus(%u)\n", wIndex);
+
+		temp = roothub_portstatus(hcd_to_ohci(hcd), wIndex - 1);
+
+		/* The port power status (PPS) bit defaults to 1 */
+		if (!ohci_da8xx_get_power(hcd))
+			temp &= ~RH_PS_PPS;
+
+		/* The port over-current indicator (POCI) bit is always 0 */
+		if (ohci_da8xx_get_oci(hcd) > 0)
+			temp |=  RH_PS_POCI;
+
+		/* The over-current indicator change (OCIC) bit is 0 too */
+		if (ocic_mask & (1 << wIndex))
+			temp |=  RH_PS_OCIC;
+
+		put_unaligned(cpu_to_le32(temp), (__le32 *)buf);
+		return 0;
+	case SetPortFeature:
+		temp = 1;
+		goto check_port;
+	case ClearPortFeature:
+		temp = 0;
+
+check_port:
+		/* Check the port number */
+		if (wIndex != 1)
+			break;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_POWER:
+			dev_dbg(dev, "%sPortFeature(%u): %s\n",
+				temp ? "Set" : "Clear", wIndex, "POWER");
+
+			return ohci_da8xx_set_power(hcd, temp) ? -EPIPE : 0;
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+			dev_dbg(dev, "%sPortFeature(%u): %s\n",
+				temp ? "Set" : "Clear", wIndex,
+				"C_OVER_CURRENT");
+
+			if (temp)
+				ocic_mask |= 1 << wIndex;
+			else
+				ocic_mask &= ~(1 << wIndex);
+			return 0;
+		}
+	}
+
+	return orig_ohci_hub_control(hcd, typeReq, wValue,
+			wIndex, buf, wLength);
+}
+
+/*-------------------------------------------------------------------------*/
+#ifdef CONFIG_OF
+static const struct of_device_id da8xx_ohci_ids[] = {
+	{ .compatible = "ti,da830-ohci" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, da8xx_ohci_ids);
+#endif
+
+static int ohci_da8xx_probe(struct platform_device *pdev)
+{
+	struct da8xx_ohci_hcd *da8xx_ohci;
+	struct device *dev = &pdev->dev;
+	int error, hcd_irq, oc_irq;
+	struct usb_hcd	*hcd;
+	struct resource *mem;
+
+	hcd = usb_create_hcd(&ohci_da8xx_hc_driver, dev, dev_name(dev));
+	if (!hcd)
+		return -ENOMEM;
+
+	da8xx_ohci = to_da8xx_ohci(hcd);
+	da8xx_ohci->hcd = hcd;
+
+	da8xx_ohci->usb11_clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(da8xx_ohci->usb11_clk)) {
+		error = PTR_ERR(da8xx_ohci->usb11_clk);
+		if (error != -EPROBE_DEFER)
+			dev_err(dev, "Failed to get clock.\n");
+		goto err;
+	}
+
+	da8xx_ohci->usb11_phy = devm_phy_get(dev, "usb-phy");
+	if (IS_ERR(da8xx_ohci->usb11_phy)) {
+		error = PTR_ERR(da8xx_ohci->usb11_phy);
+		if (error != -EPROBE_DEFER)
+			dev_err(dev, "Failed to get phy.\n");
+		goto err;
+	}
+
+	da8xx_ohci->vbus_reg = devm_regulator_get_optional(dev, "vbus");
+	if (IS_ERR(da8xx_ohci->vbus_reg)) {
+		error = PTR_ERR(da8xx_ohci->vbus_reg);
+		if (error == -ENODEV) {
+			da8xx_ohci->vbus_reg = NULL;
+		} else if (error == -EPROBE_DEFER) {
+			goto err;
+		} else {
+			dev_err(dev, "Failed to get regulator\n");
+			goto err;
+		}
+	}
+
+	da8xx_ohci->oc_gpio = devm_gpiod_get_optional(dev, "oc", GPIOD_IN);
+	if (IS_ERR(da8xx_ohci->oc_gpio)) {
+		error = PTR_ERR(da8xx_ohci->oc_gpio);
+		goto err;
+	}
+
+	if (da8xx_ohci->oc_gpio) {
+		oc_irq = gpiod_to_irq(da8xx_ohci->oc_gpio);
+		if (oc_irq < 0) {
+			error = oc_irq;
+			goto err;
+		}
+
+		error = devm_request_threaded_irq(dev, oc_irq, NULL,
+				ohci_da8xx_oc_thread, IRQF_TRIGGER_RISING |
+				IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				"OHCI over-current indicator", da8xx_ohci);
+		if (error)
+			goto err;
+	}
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	hcd->regs = devm_ioremap_resource(dev, mem);
+	if (IS_ERR(hcd->regs)) {
+		error = PTR_ERR(hcd->regs);
+		goto err;
+	}
+	hcd->rsrc_start = mem->start;
+	hcd->rsrc_len = resource_size(mem);
+
+	hcd_irq = platform_get_irq(pdev, 0);
+	if (hcd_irq < 0) {
+		error = -ENODEV;
+		goto err;
+	}
+
+	error = usb_add_hcd(hcd, hcd_irq, 0);
+	if (error)
+		goto err;
+
+	device_wakeup_enable(hcd->self.controller);
+
+	error = ohci_da8xx_register_notify(hcd);
+	if (error)
+		goto err_remove_hcd;
+
+	return 0;
+
+err_remove_hcd:
+	usb_remove_hcd(hcd);
+err:
+	usb_put_hcd(hcd);
+	return error;
+}
+
+static int ohci_da8xx_remove(struct platform_device *pdev)
+{
+	struct usb_hcd	*hcd = platform_get_drvdata(pdev);
+
+	usb_remove_hcd(hcd);
+	usb_put_hcd(hcd);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int ohci_da8xx_suspend(struct platform_device *pdev,
+				pm_message_t message)
+{
+	struct usb_hcd	*hcd	= platform_get_drvdata(pdev);
+	struct ohci_hcd	*ohci	= hcd_to_ohci(hcd);
+	bool		do_wakeup	= device_may_wakeup(&pdev->dev);
+	int		ret;
+
+
+	if (time_before(jiffies, ohci->next_statechange))
+		msleep(5);
+	ohci->next_statechange = jiffies;
+
+	ret = ohci_suspend(hcd, do_wakeup);
+	if (ret)
+		return ret;
+
+	ohci_da8xx_disable(hcd);
+	hcd->state = HC_STATE_SUSPENDED;
+
+	return ret;
+}
+
+static int ohci_da8xx_resume(struct platform_device *dev)
+{
+	struct usb_hcd	*hcd	= platform_get_drvdata(dev);
+	struct ohci_hcd	*ohci	= hcd_to_ohci(hcd);
+	int ret;
+
+	if (time_before(jiffies, ohci->next_statechange))
+		msleep(5);
+	ohci->next_statechange = jiffies;
+
+	ret = ohci_da8xx_enable(hcd);
+	if (ret)
+		return ret;
+
+	ohci_resume(hcd, false);
+
+	return 0;
+}
+#endif
+
+static const struct ohci_driver_overrides da8xx_overrides __initconst = {
+	.reset		 = ohci_da8xx_reset,
+	.extra_priv_size = sizeof(struct da8xx_ohci_hcd),
+};
+
+/*
+ * Driver definition to register with platform structure.
+ */
+static struct platform_driver ohci_hcd_da8xx_driver = {
+	.probe		= ohci_da8xx_probe,
+	.remove		= ohci_da8xx_remove,
+	.shutdown 	= usb_hcd_platform_shutdown,
+#ifdef	CONFIG_PM
+	.suspend	= ohci_da8xx_suspend,
+	.resume		= ohci_da8xx_resume,
+#endif
+	.driver		= {
+		.name	= DRV_NAME,
+		.of_match_table = of_match_ptr(da8xx_ohci_ids),
+	},
+};
+
+static int __init ohci_da8xx_init(void)
+{
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	pr_info("%s: " DRIVER_DESC "\n", DRV_NAME);
+	ohci_init_driver(&ohci_da8xx_hc_driver, &da8xx_overrides);
+
+	/*
+	 * The Davinci da8xx HW has some unusual quirks, which require
+	 * da8xx-specific workarounds. We override certain hc_driver
+	 * functions here to achieve that. We explicitly do not enhance
+	 * ohci_driver_overrides to allow this more easily, since this
+	 * is an unusual case, and we don't want to encourage others to
+	 * override these functions by making it too easy.
+	 */
+
+	orig_ohci_hub_control = ohci_da8xx_hc_driver.hub_control;
+	orig_ohci_hub_status_data = ohci_da8xx_hc_driver.hub_status_data;
+
+	ohci_da8xx_hc_driver.hub_status_data     = ohci_da8xx_hub_status_data;
+	ohci_da8xx_hc_driver.hub_control         = ohci_da8xx_hub_control;
+
+	return platform_driver_register(&ohci_hcd_da8xx_driver);
+}
+module_init(ohci_da8xx_init);
+
+static void __exit ohci_da8xx_exit(void)
+{
+	platform_driver_unregister(&ohci_hcd_da8xx_driver);
+}
+module_exit(ohci_da8xx_exit);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);