1 files changed, 127 insertions, 0 deletions
diff --git a/drivers/usb/host/xhci-mvebu.c b/drivers/usb/host/xhci-mvebu.c
new file mode 100644
index 000000000..eabccf257
--- /dev/null
+++ b/drivers/usb/host/xhci-mvebu.c
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2014 Marvell
+ * Author: Gregory CLEMENT <gregory.clement@free-electrons.com>
+ */
+
+#include <linux/io.h>
+#include <linux/mbus.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
+
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#include "xhci-mvebu.h"
+#include "xhci.h"
+
+#define USB3_MAX_WINDOWS	4
+#define USB3_WIN_CTRL(w)	(0x0 + ((w) * 8))
+#define USB3_WIN_BASE(w)	(0x4 + ((w) * 8))
+
+static void xhci_mvebu_mbus_config(void __iomem *base,
+			const struct mbus_dram_target_info *dram)
+{
+	int win;
+
+	/* Clear all existing windows */
+	for (win = 0; win < USB3_MAX_WINDOWS; win++) {
+		writel(0, base + USB3_WIN_CTRL(win));
+		writel(0, base + USB3_WIN_BASE(win));
+	}
+
+	/* Program each DRAM CS in a seperate window */
+	for (win = 0; win < dram->num_cs; win++) {
+		const struct mbus_dram_window *cs = &dram->cs[win];
+
+		writel(((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) |
+		       (dram->mbus_dram_target_id << 4) | 1,
+		       base + USB3_WIN_CTRL(win));
+
+		writel((cs->base & 0xffff0000), base + USB3_WIN_BASE(win));
+	}
+}
+
+int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd)
+{
+	struct device *dev = hcd->self.controller;
+	struct platform_device *pdev = to_platform_device(dev);
+	struct resource	*res;
+	void __iomem *base;
+	const struct mbus_dram_target_info *dram;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!res)
+		return -ENODEV;
+
+	/*
+	 * We don't use devm_ioremap() because this mapping should
+	 * only exists for the duration of this probe function.
+	 */
+	base = ioremap(res->start, resource_size(res));
+	if (!base)
+		return -ENODEV;
+
+	dram = mv_mbus_dram_info();
+	xhci_mvebu_mbus_config(base, dram);
+
+	/*
+	 * This memory area was only needed to configure the MBus
+	 * windows, and is therefore no longer useful.
+	 */
+	iounmap(base);
+
+	return 0;
+}
+
+int xhci_mvebu_a3700_plat_setup(struct usb_hcd *hcd)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	struct device *dev = hcd->self.controller;
+	struct phy *phy;
+	int ret;
+
+	/* Old bindings miss the PHY handle */
+	phy = of_phy_get(dev->of_node, "usb3-phy");
+	if (IS_ERR(phy) && PTR_ERR(phy) == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+	else if (IS_ERR(phy))
+		goto phy_out;
+
+	ret = phy_init(phy);
+	if (ret)
+		goto phy_put;
+
+	ret = phy_set_mode(phy, PHY_MODE_USB_HOST_SS);
+	if (ret)
+		goto phy_exit;
+
+	ret = phy_power_on(phy);
+	if (ret == -EOPNOTSUPP) {
+		/* Skip initializatin of XHCI PHY when it is unsupported by firmware */
+		dev_warn(dev, "PHY unsupported by firmware\n");
+		xhci->quirks |= XHCI_SKIP_PHY_INIT;
+	}
+	if (ret)
+		goto phy_exit;
+
+	phy_power_off(phy);
+phy_exit:
+	phy_exit(phy);
+phy_put:
+	of_phy_put(phy);
+phy_out:
+
+	return 0;
+}
+
+int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd)
+{
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+
+	/* Without reset on resume, the HC won't work at all */
+	xhci->quirks |= XHCI_RESET_ON_RESUME;
+
+	return 0;
+}