1 files changed, 460 insertions, 0 deletions

diff --git a/drivers/usb/phy/phy-twl6030-usb.c b/drivers/usb/phy/phy-twl6030-usb.c
new file mode 100644
index 000000000..ab3c38a7d
--- /dev/null
+++ b/drivers/usb/phy/phy-twl6030-usb.c
@@ -0,0 +1,460 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * twl6030_usb - TWL6030 USB transceiver, talking to OMAP OTG driver.
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com
+ *
+ * Author: Hema HK <hemahk@ti.com>
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/usb/musb.h>
+#include <linux/usb/phy_companion.h>
+#include <linux/phy/omap_usb.h>
+#include <linux/mfd/twl.h>
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+
+/* usb register definitions */
+#define USB_VENDOR_ID_LSB		0x00
+#define USB_VENDOR_ID_MSB		0x01
+#define USB_PRODUCT_ID_LSB		0x02
+#define USB_PRODUCT_ID_MSB		0x03
+#define USB_VBUS_CTRL_SET		0x04
+#define USB_VBUS_CTRL_CLR		0x05
+#define USB_ID_CTRL_SET			0x06
+#define USB_ID_CTRL_CLR			0x07
+#define USB_VBUS_INT_SRC		0x08
+#define USB_VBUS_INT_LATCH_SET		0x09
+#define USB_VBUS_INT_LATCH_CLR		0x0A
+#define USB_VBUS_INT_EN_LO_SET		0x0B
+#define USB_VBUS_INT_EN_LO_CLR		0x0C
+#define USB_VBUS_INT_EN_HI_SET		0x0D
+#define USB_VBUS_INT_EN_HI_CLR		0x0E
+#define USB_ID_INT_SRC			0x0F
+#define USB_ID_INT_LATCH_SET		0x10
+#define USB_ID_INT_LATCH_CLR		0x11
+
+#define USB_ID_INT_EN_LO_SET		0x12
+#define USB_ID_INT_EN_LO_CLR		0x13
+#define USB_ID_INT_EN_HI_SET		0x14
+#define USB_ID_INT_EN_HI_CLR		0x15
+#define USB_OTG_ADP_CTRL		0x16
+#define USB_OTG_ADP_HIGH		0x17
+#define USB_OTG_ADP_LOW			0x18
+#define USB_OTG_ADP_RISE		0x19
+#define USB_OTG_REVISION		0x1A
+
+/* to be moved to LDO */
+#define TWL6030_MISC2			0xE5
+#define TWL6030_CFG_LDO_PD2		0xF5
+#define TWL6030_BACKUP_REG		0xFA
+
+#define STS_HW_CONDITIONS		0x21
+
+/* In module TWL6030_MODULE_PM_MASTER */
+#define STS_HW_CONDITIONS		0x21
+#define STS_USB_ID			BIT(2)
+
+/* In module TWL6030_MODULE_PM_RECEIVER */
+#define VUSB_CFG_TRANS			0x71
+#define VUSB_CFG_STATE			0x72
+#define VUSB_CFG_VOLTAGE		0x73
+
+/* in module TWL6030_MODULE_MAIN_CHARGE */
+
+#define CHARGERUSB_CTRL1		0x8
+
+#define CONTROLLER_STAT1		0x03
+#define	VBUS_DET			BIT(2)
+
+struct twl6030_usb {
+	struct phy_companion	comparator;
+	struct device		*dev;
+
+	/* for vbus reporting with irqs disabled */
+	spinlock_t		lock;
+
+	struct regulator		*usb3v3;
+
+	/* used to check initial cable status after probe */
+	struct delayed_work	get_status_work;
+
+	/* used to set vbus, in atomic path */
+	struct work_struct	set_vbus_work;
+
+	int			irq1;
+	int			irq2;
+	enum musb_vbus_id_status linkstat;
+	u8			asleep;
+	bool			vbus_enable;
+};
+
+#define	comparator_to_twl(x) container_of((x), struct twl6030_usb, comparator)
+
+/*-------------------------------------------------------------------------*/
+
+static inline int twl6030_writeb(struct twl6030_usb *twl, u8 module,
+						u8 data, u8 address)
+{
+	int ret = 0;
+
+	ret = twl_i2c_write_u8(module, data, address);
+	if (ret < 0)
+		dev_err(twl->dev,
+			"Write[0x%x] Error %d\n", address, ret);
+	return ret;
+}
+
+static inline u8 twl6030_readb(struct twl6030_usb *twl, u8 module, u8 address)
+{
+	u8 data;
+	int ret;
+
+	ret = twl_i2c_read_u8(module, &data, address);
+	if (ret >= 0)
+		ret = data;
+	else
+		dev_err(twl->dev,
+			"readb[0x%x,0x%x] Error %d\n",
+					module, address, ret);
+	return ret;
+}
+
+static int twl6030_start_srp(struct phy_companion *comparator)
+{
+	struct twl6030_usb *twl = comparator_to_twl(comparator);
+
+	twl6030_writeb(twl, TWL_MODULE_USB, 0x24, USB_VBUS_CTRL_SET);
+	twl6030_writeb(twl, TWL_MODULE_USB, 0x84, USB_VBUS_CTRL_SET);
+
+	mdelay(100);
+	twl6030_writeb(twl, TWL_MODULE_USB, 0xa0, USB_VBUS_CTRL_CLR);
+
+	return 0;
+}
+
+static int twl6030_usb_ldo_init(struct twl6030_usb *twl)
+{
+	/* Set to OTG_REV 1.3 and turn on the ID_WAKEUP_COMP */
+	twl6030_writeb(twl, TWL6030_MODULE_ID0, 0x1, TWL6030_BACKUP_REG);
+
+	/* Program CFG_LDO_PD2 register and set VUSB bit */
+	twl6030_writeb(twl, TWL6030_MODULE_ID0, 0x1, TWL6030_CFG_LDO_PD2);
+
+	/* Program MISC2 register and set bit VUSB_IN_VBAT */
+	twl6030_writeb(twl, TWL6030_MODULE_ID0, 0x10, TWL6030_MISC2);
+
+	twl->usb3v3 = regulator_get(twl->dev, "usb");
+	if (IS_ERR(twl->usb3v3))
+		return -ENODEV;
+
+	/* Program the USB_VBUS_CTRL_SET and set VBUS_ACT_COMP bit */
+	twl6030_writeb(twl, TWL_MODULE_USB, 0x4, USB_VBUS_CTRL_SET);
+
+	/*
+	 * Program the USB_ID_CTRL_SET register to enable GND drive
+	 * and the ID comparators
+	 */
+	twl6030_writeb(twl, TWL_MODULE_USB, 0x14, USB_ID_CTRL_SET);
+
+	return 0;
+}
+
+static ssize_t vbus_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct twl6030_usb *twl = dev_get_drvdata(dev);
+	unsigned long flags;
+	int ret = -EINVAL;
+
+	spin_lock_irqsave(&twl->lock, flags);
+
+	switch (twl->linkstat) {
+	case MUSB_VBUS_VALID:
+	       ret = snprintf(buf, PAGE_SIZE, "vbus\n");
+	       break;
+	case MUSB_ID_GROUND:
+	       ret = snprintf(buf, PAGE_SIZE, "id\n");
+	       break;
+	case MUSB_VBUS_OFF:
+	       ret = snprintf(buf, PAGE_SIZE, "none\n");
+	       break;
+	default:
+	       ret = snprintf(buf, PAGE_SIZE, "UNKNOWN\n");
+	}
+	spin_unlock_irqrestore(&twl->lock, flags);
+
+	return ret;
+}
+static DEVICE_ATTR_RO(vbus);
+
+static struct attribute *twl6030_attrs[] = {
+	&dev_attr_vbus.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(twl6030);
+
+static irqreturn_t twl6030_usb_irq(int irq, void *_twl)
+{
+	struct twl6030_usb *twl = _twl;
+	enum musb_vbus_id_status status = MUSB_UNKNOWN;
+	u8 vbus_state, hw_state;
+	int ret;
+
+	hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS);
+
+	vbus_state = twl6030_readb(twl, TWL_MODULE_MAIN_CHARGE,
+						CONTROLLER_STAT1);
+	if (!(hw_state & STS_USB_ID)) {
+		if (vbus_state & VBUS_DET) {
+			ret = regulator_enable(twl->usb3v3);
+			if (ret)
+				dev_err(twl->dev, "Failed to enable usb3v3\n");
+
+			twl->asleep = 1;
+			status = MUSB_VBUS_VALID;
+			twl->linkstat = status;
+			ret = musb_mailbox(status);
+			if (ret)
+				twl->linkstat = MUSB_UNKNOWN;
+		} else {
+			if (twl->linkstat != MUSB_UNKNOWN) {
+				status = MUSB_VBUS_OFF;
+				twl->linkstat = status;
+				ret = musb_mailbox(status);
+				if (ret)
+					twl->linkstat = MUSB_UNKNOWN;
+				if (twl->asleep) {
+					regulator_disable(twl->usb3v3);
+					twl->asleep = 0;
+				}
+			}
+		}
+	}
+	sysfs_notify(&twl->dev->kobj, NULL, "vbus");
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
+{
+	struct twl6030_usb *twl = _twl;
+	enum musb_vbus_id_status status = MUSB_UNKNOWN;
+	u8 hw_state;
+	int ret;
+
+	hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS);
+
+	if (hw_state & STS_USB_ID) {
+		ret = regulator_enable(twl->usb3v3);
+		if (ret)
+			dev_err(twl->dev, "Failed to enable usb3v3\n");
+
+		twl->asleep = 1;
+		twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_CLR);
+		twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_SET);
+		status = MUSB_ID_GROUND;
+		twl->linkstat = status;
+		ret = musb_mailbox(status);
+		if (ret)
+			twl->linkstat = MUSB_UNKNOWN;
+	} else  {
+		twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_CLR);
+		twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
+	}
+	twl6030_writeb(twl, TWL_MODULE_USB, status, USB_ID_INT_LATCH_CLR);
+
+	return IRQ_HANDLED;
+}
+
+static void twl6030_status_work(struct work_struct *work)
+{
+	struct twl6030_usb *twl = container_of(work, struct twl6030_usb,
+					       get_status_work.work);
+
+	twl6030_usb_irq(twl->irq2, twl);
+	twl6030_usbotg_irq(twl->irq1, twl);
+}
+
+static int twl6030_enable_irq(struct twl6030_usb *twl)
+{
+	twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
+	twl6030_interrupt_unmask(0x05, REG_INT_MSK_LINE_C);
+	twl6030_interrupt_unmask(0x05, REG_INT_MSK_STS_C);
+
+	twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK,
+				REG_INT_MSK_LINE_C);
+	twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK,
+				REG_INT_MSK_STS_C);
+
+	return 0;
+}
+
+static void otg_set_vbus_work(struct work_struct *data)
+{
+	struct twl6030_usb *twl = container_of(data, struct twl6030_usb,
+								set_vbus_work);
+
+	/*
+	 * Start driving VBUS. Set OPA_MODE bit in CHARGERUSB_CTRL1
+	 * register. This enables boost mode.
+	 */
+
+	if (twl->vbus_enable)
+		twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE, 0x40,
+							CHARGERUSB_CTRL1);
+	else
+		twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE, 0x00,
+							CHARGERUSB_CTRL1);
+}
+
+static int twl6030_set_vbus(struct phy_companion *comparator, bool enabled)
+{
+	struct twl6030_usb *twl = comparator_to_twl(comparator);
+
+	twl->vbus_enable = enabled;
+	schedule_work(&twl->set_vbus_work);
+
+	return 0;
+}
+
+static int twl6030_usb_probe(struct platform_device *pdev)
+{
+	u32 ret;
+	struct twl6030_usb	*twl;
+	int			status, err;
+	struct device_node	*np = pdev->dev.of_node;
+	struct device		*dev = &pdev->dev;
+
+	if (!np) {
+		dev_err(dev, "no DT info\n");
+		return -EINVAL;
+	}
+
+	twl = devm_kzalloc(dev, sizeof(*twl), GFP_KERNEL);
+	if (!twl)
+		return -ENOMEM;
+
+	twl->dev		= &pdev->dev;
+	twl->irq1		= platform_get_irq(pdev, 0);
+	twl->irq2		= platform_get_irq(pdev, 1);
+	twl->linkstat		= MUSB_UNKNOWN;
+
+	if (twl->irq1 < 0)
+		return twl->irq1;
+	if (twl->irq2 < 0)
+		return twl->irq2;
+
+	twl->comparator.set_vbus	= twl6030_set_vbus;
+	twl->comparator.start_srp	= twl6030_start_srp;
+
+	ret = omap_usb2_set_comparator(&twl->comparator);
+	if (ret == -ENODEV) {
+		dev_info(&pdev->dev, "phy not ready, deferring probe");
+		return -EPROBE_DEFER;
+	}
+
+	/* init spinlock for workqueue */
+	spin_lock_init(&twl->lock);
+
+	err = twl6030_usb_ldo_init(twl);
+	if (err) {
+		dev_err(&pdev->dev, "ldo init failed\n");
+		return err;
+	}
+
+	platform_set_drvdata(pdev, twl);
+
+	INIT_WORK(&twl->set_vbus_work, otg_set_vbus_work);
+	INIT_DELAYED_WORK(&twl->get_status_work, twl6030_status_work);
+
+	status = request_threaded_irq(twl->irq1, NULL, twl6030_usbotg_irq,
+			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+			"twl6030_usb", twl);
+	if (status < 0) {
+		dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
+			twl->irq1, status);
+		goto err_put_regulator;
+	}
+
+	status = request_threaded_irq(twl->irq2, NULL, twl6030_usb_irq,
+			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+			"twl6030_usb", twl);
+	if (status < 0) {
+		dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
+			twl->irq2, status);
+		goto err_free_irq1;
+	}
+
+	twl->asleep = 0;
+	twl6030_enable_irq(twl);
+	schedule_delayed_work(&twl->get_status_work, HZ);
+	dev_info(&pdev->dev, "Initialized TWL6030 USB module\n");
+
+	return 0;
+
+err_free_irq1:
+	free_irq(twl->irq1, twl);
+err_put_regulator:
+	regulator_put(twl->usb3v3);
+
+	return status;
+}
+
+static int twl6030_usb_remove(struct platform_device *pdev)
+{
+	struct twl6030_usb *twl = platform_get_drvdata(pdev);
+
+	cancel_delayed_work_sync(&twl->get_status_work);
+	twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK,
+		REG_INT_MSK_LINE_C);
+	twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK,
+			REG_INT_MSK_STS_C);
+	free_irq(twl->irq1, twl);
+	free_irq(twl->irq2, twl);
+	regulator_put(twl->usb3v3);
+	cancel_work_sync(&twl->set_vbus_work);
+
+	return 0;
+}
+
+static const struct of_device_id twl6030_usb_id_table[] = {
+	{ .compatible = "ti,twl6030-usb" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, twl6030_usb_id_table);
+
+static struct platform_driver twl6030_usb_driver = {
+	.probe		= twl6030_usb_probe,
+	.remove		= twl6030_usb_remove,
+	.driver		= {
+		.name	= "twl6030_usb",
+		.of_match_table = of_match_ptr(twl6030_usb_id_table),
+		.dev_groups = twl6030_groups,
+	},
+};
+
+static int __init twl6030_usb_init(void)
+{
+	return platform_driver_register(&twl6030_usb_driver);
+}
+subsys_initcall(twl6030_usb_init);
+
+static void __exit twl6030_usb_exit(void)
+{
+	platform_driver_unregister(&twl6030_usb_driver);
+}
+module_exit(twl6030_usb_exit);
+
+MODULE_ALIAS("platform:twl6030_usb");
+MODULE_AUTHOR("Hema HK <hemahk@ti.com>");
+MODULE_DESCRIPTION("TWL6030 USB transceiver driver");
+MODULE_LICENSE("GPL");