diff options
Diffstat (limited to 'include/drm/drm_connector.h')
-rw-r--r-- | include/drm/drm_connector.h | 1747 |
1 files changed, 1747 insertions, 0 deletions
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h new file mode 100644 index 000000000..03d39532c --- /dev/null +++ b/include/drm/drm_connector.h @@ -0,0 +1,1747 @@ +/* + * Copyright (c) 2016 Intel Corporation + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#ifndef __DRM_CONNECTOR_H__ +#define __DRM_CONNECTOR_H__ + +#include <linux/list.h> +#include <linux/llist.h> +#include <linux/ctype.h> +#include <linux/hdmi.h> +#include <drm/drm_mode_object.h> +#include <drm/drm_util.h> + +#include <uapi/drm/drm_mode.h> + +struct drm_connector_helper_funcs; +struct drm_modeset_acquire_ctx; +struct drm_device; +struct drm_crtc; +struct drm_encoder; +struct drm_property; +struct drm_property_blob; +struct drm_printer; +struct edid; +struct i2c_adapter; + +enum drm_connector_force { + DRM_FORCE_UNSPECIFIED, + DRM_FORCE_OFF, + DRM_FORCE_ON, /* force on analog part normally */ + DRM_FORCE_ON_DIGITAL, /* for DVI-I use digital connector */ +}; + +/** + * enum drm_connector_status - status for a &drm_connector + * + * This enum is used to track the connector status. There are no separate + * #defines for the uapi! + */ +enum drm_connector_status { + /** + * @connector_status_connected: The connector is definitely connected to + * a sink device, and can be enabled. + */ + connector_status_connected = 1, + /** + * @connector_status_disconnected: The connector isn't connected to a + * sink device which can be autodetect. For digital outputs like DP or + * HDMI (which can be realiable probed) this means there's really + * nothing there. It is driver-dependent whether a connector with this + * status can be lit up or not. + */ + connector_status_disconnected = 2, + /** + * @connector_status_unknown: The connector's status could not be + * reliably detected. This happens when probing would either cause + * flicker (like load-detection when the connector is in use), or when a + * hardware resource isn't available (like when load-detection needs a + * free CRTC). It should be possible to light up the connector with one + * of the listed fallback modes. For default configuration userspace + * should only try to light up connectors with unknown status when + * there's not connector with @connector_status_connected. + */ + connector_status_unknown = 3, +}; + +/** + * enum drm_connector_registration_status - userspace registration status for + * a &drm_connector + * + * This enum is used to track the status of initializing a connector and + * registering it with userspace, so that DRM can prevent bogus modesets on + * connectors that no longer exist. + */ +enum drm_connector_registration_state { + /** + * @DRM_CONNECTOR_INITIALIZING: The connector has just been created, + * but has yet to be exposed to userspace. There should be no + * additional restrictions to how the state of this connector may be + * modified. + */ + DRM_CONNECTOR_INITIALIZING = 0, + + /** + * @DRM_CONNECTOR_REGISTERED: The connector has been fully initialized + * and registered with sysfs, as such it has been exposed to + * userspace. There should be no additional restrictions to how the + * state of this connector may be modified. + */ + DRM_CONNECTOR_REGISTERED = 1, + + /** + * @DRM_CONNECTOR_UNREGISTERED: The connector has either been exposed + * to userspace and has since been unregistered and removed from + * userspace, or the connector was unregistered before it had a chance + * to be exposed to userspace (e.g. still in the + * @DRM_CONNECTOR_INITIALIZING state). When a connector is + * unregistered, there are additional restrictions to how its state + * may be modified: + * + * - An unregistered connector may only have its DPMS changed from + * On->Off. Once DPMS is changed to Off, it may not be switched back + * to On. + * - Modesets are not allowed on unregistered connectors, unless they + * would result in disabling its assigned CRTCs. This means + * disabling a CRTC on an unregistered connector is OK, but enabling + * one is not. + * - Removing a CRTC from an unregistered connector is OK, but new + * CRTCs may never be assigned to an unregistered connector. + */ + DRM_CONNECTOR_UNREGISTERED = 2, +}; + +enum subpixel_order { + SubPixelUnknown = 0, + SubPixelHorizontalRGB, + SubPixelHorizontalBGR, + SubPixelVerticalRGB, + SubPixelVerticalBGR, + SubPixelNone, + +}; + +/** + * struct drm_scrambling: sink's scrambling support. + */ +struct drm_scrambling { + /** + * @supported: scrambling supported for rates > 340 Mhz. + */ + bool supported; + /** + * @low_rates: scrambling supported for rates <= 340 Mhz. + */ + bool low_rates; +}; + +/* + * struct drm_scdc - Information about scdc capabilities of a HDMI 2.0 sink + * + * Provides SCDC register support and capabilities related information on a + * HDMI 2.0 sink. In case of a HDMI 1.4 sink, all parameter must be 0. + */ +struct drm_scdc { + /** + * @supported: status control & data channel present. + */ + bool supported; + /** + * @read_request: sink is capable of generating scdc read request. + */ + bool read_request; + /** + * @scrambling: sink's scrambling capabilities + */ + struct drm_scrambling scrambling; +}; + + +/** + * struct drm_hdmi_info - runtime information about the connected HDMI sink + * + * Describes if a given display supports advanced HDMI 2.0 features. + * This information is available in CEA-861-F extension blocks (like HF-VSDB). + */ +struct drm_hdmi_info { + /** @scdc: sink's scdc support and capabilities */ + struct drm_scdc scdc; + + /** + * @y420_vdb_modes: bitmap of modes which can support ycbcr420 + * output only (not normal RGB/YCBCR444/422 outputs). The max VIC + * defined by the CEA-861-G spec is 219, so the size is 256 bits to map + * up to 256 VICs. + */ + unsigned long y420_vdb_modes[BITS_TO_LONGS(256)]; + + /** + * @y420_cmdb_modes: bitmap of modes which can support ycbcr420 + * output also, along with normal HDMI outputs. The max VIC defined by + * the CEA-861-G spec is 219, so the size is 256 bits to map up to 256 + * VICs. + */ + unsigned long y420_cmdb_modes[BITS_TO_LONGS(256)]; + + /** @y420_cmdb_map: bitmap of SVD index, to extraxt vcb modes */ + u64 y420_cmdb_map; + + /** @y420_dc_modes: bitmap of deep color support index */ + u8 y420_dc_modes; +}; + +/** + * enum drm_link_status - connector's link_status property value + * + * This enum is used as the connector's link status property value. + * It is set to the values defined in uapi. + * + * @DRM_LINK_STATUS_GOOD: DP Link is Good as a result of successful + * link training + * @DRM_LINK_STATUS_BAD: DP Link is BAD as a result of link training + * failure + */ +enum drm_link_status { + DRM_LINK_STATUS_GOOD = DRM_MODE_LINK_STATUS_GOOD, + DRM_LINK_STATUS_BAD = DRM_MODE_LINK_STATUS_BAD, +}; + +/** + * enum drm_panel_orientation - panel_orientation info for &drm_display_info + * + * This enum is used to track the (LCD) panel orientation. There are no + * separate #defines for the uapi! + * + * @DRM_MODE_PANEL_ORIENTATION_UNKNOWN: The drm driver has not provided any + * panel orientation information (normal + * for non panels) in this case the "panel + * orientation" connector prop will not be + * attached. + * @DRM_MODE_PANEL_ORIENTATION_NORMAL: The top side of the panel matches the + * top side of the device's casing. + * @DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP: The top side of the panel matches the + * bottom side of the device's casing, iow + * the panel is mounted upside-down. + * @DRM_MODE_PANEL_ORIENTATION_LEFT_UP: The left side of the panel matches the + * top side of the device's casing. + * @DRM_MODE_PANEL_ORIENTATION_RIGHT_UP: The right side of the panel matches the + * top side of the device's casing. + */ +enum drm_panel_orientation { + DRM_MODE_PANEL_ORIENTATION_UNKNOWN = -1, + DRM_MODE_PANEL_ORIENTATION_NORMAL = 0, + DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP, + DRM_MODE_PANEL_ORIENTATION_LEFT_UP, + DRM_MODE_PANEL_ORIENTATION_RIGHT_UP, +}; + +/** + * struct drm_monitor_range_info - Panel's Monitor range in EDID for + * &drm_display_info + * + * This struct is used to store a frequency range supported by panel + * as parsed from EDID's detailed monitor range descriptor block. + * + * @min_vfreq: This is the min supported refresh rate in Hz from + * EDID's detailed monitor range. + * @max_vfreq: This is the max supported refresh rate in Hz from + * EDID's detailed monitor range + */ +struct drm_monitor_range_info { + u8 min_vfreq; + u8 max_vfreq; +}; + +/* + * This is a consolidated colorimetry list supported by HDMI and + * DP protocol standard. The respective connectors will register + * a property with the subset of this list (supported by that + * respective protocol). Userspace will set the colorspace through + * a colorspace property which will be created and exposed to + * userspace. + */ + +/* For Default case, driver will set the colorspace */ +#define DRM_MODE_COLORIMETRY_DEFAULT 0 +/* CEA 861 Normal Colorimetry options */ +#define DRM_MODE_COLORIMETRY_NO_DATA 0 +#define DRM_MODE_COLORIMETRY_SMPTE_170M_YCC 1 +#define DRM_MODE_COLORIMETRY_BT709_YCC 2 +/* CEA 861 Extended Colorimetry Options */ +#define DRM_MODE_COLORIMETRY_XVYCC_601 3 +#define DRM_MODE_COLORIMETRY_XVYCC_709 4 +#define DRM_MODE_COLORIMETRY_SYCC_601 5 +#define DRM_MODE_COLORIMETRY_OPYCC_601 6 +#define DRM_MODE_COLORIMETRY_OPRGB 7 +#define DRM_MODE_COLORIMETRY_BT2020_CYCC 8 +#define DRM_MODE_COLORIMETRY_BT2020_RGB 9 +#define DRM_MODE_COLORIMETRY_BT2020_YCC 10 +/* Additional Colorimetry extension added as part of CTA 861.G */ +#define DRM_MODE_COLORIMETRY_DCI_P3_RGB_D65 11 +#define DRM_MODE_COLORIMETRY_DCI_P3_RGB_THEATER 12 +/* Additional Colorimetry Options added for DP 1.4a VSC Colorimetry Format */ +#define DRM_MODE_COLORIMETRY_RGB_WIDE_FIXED 13 +#define DRM_MODE_COLORIMETRY_RGB_WIDE_FLOAT 14 +#define DRM_MODE_COLORIMETRY_BT601_YCC 15 + +/** + * enum drm_bus_flags - bus_flags info for &drm_display_info + * + * This enum defines signal polarities and clock edge information for signals on + * a bus as bitmask flags. + * + * The clock edge information is conveyed by two sets of symbols, + * DRM_BUS_FLAGS_*_DRIVE_\* and DRM_BUS_FLAGS_*_SAMPLE_\*. When this enum is + * used to describe a bus from the point of view of the transmitter, the + * \*_DRIVE_\* flags should be used. When used from the point of view of the + * receiver, the \*_SAMPLE_\* flags should be used. The \*_DRIVE_\* and + * \*_SAMPLE_\* flags alias each other, with the \*_SAMPLE_POSEDGE and + * \*_SAMPLE_NEGEDGE flags being equal to \*_DRIVE_NEGEDGE and \*_DRIVE_POSEDGE + * respectively. This simplifies code as signals are usually sampled on the + * opposite edge of the driving edge. Transmitters and receivers may however + * need to take other signal timings into account to convert between driving + * and sample edges. + */ +enum drm_bus_flags { + /** + * @DRM_BUS_FLAG_DE_LOW: + * + * The Data Enable signal is active low + */ + DRM_BUS_FLAG_DE_LOW = BIT(0), + + /** + * @DRM_BUS_FLAG_DE_HIGH: + * + * The Data Enable signal is active high + */ + DRM_BUS_FLAG_DE_HIGH = BIT(1), + + /** + * @DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE: + * + * Data is driven on the rising edge of the pixel clock + */ + DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE = BIT(2), + + /** + * @DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE: + * + * Data is driven on the falling edge of the pixel clock + */ + DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE = BIT(3), + + /** + * @DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE: + * + * Data is sampled on the rising edge of the pixel clock + */ + DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE = DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE, + + /** + * @DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE: + * + * Data is sampled on the falling edge of the pixel clock + */ + DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE = DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE, + + /** + * @DRM_BUS_FLAG_DATA_MSB_TO_LSB: + * + * Data is transmitted MSB to LSB on the bus + */ + DRM_BUS_FLAG_DATA_MSB_TO_LSB = BIT(4), + + /** + * @DRM_BUS_FLAG_DATA_LSB_TO_MSB: + * + * Data is transmitted LSB to MSB on the bus + */ + DRM_BUS_FLAG_DATA_LSB_TO_MSB = BIT(5), + + /** + * @DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE: + * + * Sync signals are driven on the rising edge of the pixel clock + */ + DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE = BIT(6), + + /** + * @DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE: + * + * Sync signals are driven on the falling edge of the pixel clock + */ + DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE = BIT(7), + + /** + * @DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE: + * + * Sync signals are sampled on the rising edge of the pixel clock + */ + DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE = DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE, + + /** + * @DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE: + * + * Sync signals are sampled on the falling edge of the pixel clock + */ + DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE = DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE, + + /** + * @DRM_BUS_FLAG_SHARP_SIGNALS: + * + * Set if the Sharp-specific signals (SPL, CLS, PS, REV) must be used + */ + DRM_BUS_FLAG_SHARP_SIGNALS = BIT(8), +}; + +/** + * struct drm_display_info - runtime data about the connected sink + * + * Describes a given display (e.g. CRT or flat panel) and its limitations. For + * fixed display sinks like built-in panels there's not much difference between + * this and &struct drm_connector. But for sinks with a real cable this + * structure is meant to describe all the things at the other end of the cable. + * + * For sinks which provide an EDID this can be filled out by calling + * drm_add_edid_modes(). + */ +struct drm_display_info { + /** + * @width_mm: Physical width in mm. + */ + unsigned int width_mm; + + /** + * @height_mm: Physical height in mm. + */ + unsigned int height_mm; + + /** + * @bpc: Maximum bits per color channel. Used by HDMI and DP outputs. + */ + unsigned int bpc; + + /** + * @subpixel_order: Subpixel order of LCD panels. + */ + enum subpixel_order subpixel_order; + +#define DRM_COLOR_FORMAT_RGB444 (1<<0) +#define DRM_COLOR_FORMAT_YCRCB444 (1<<1) +#define DRM_COLOR_FORMAT_YCRCB422 (1<<2) +#define DRM_COLOR_FORMAT_YCRCB420 (1<<3) + + /** + * @panel_orientation: Read only connector property for built-in panels, + * indicating the orientation of the panel vs the device's casing. + * drm_connector_init() sets this to DRM_MODE_PANEL_ORIENTATION_UNKNOWN. + * When not UNKNOWN this gets used by the drm_fb_helpers to rotate the + * fb to compensate and gets exported as prop to userspace. + */ + int panel_orientation; + + /** + * @color_formats: HDMI Color formats, selects between RGB and YCrCb + * modes. Used DRM_COLOR_FORMAT\_ defines, which are _not_ the same ones + * as used to describe the pixel format in framebuffers, and also don't + * match the formats in @bus_formats which are shared with v4l. + */ + u32 color_formats; + + /** + * @bus_formats: Pixel data format on the wire, somewhat redundant with + * @color_formats. Array of size @num_bus_formats encoded using + * MEDIA_BUS_FMT\_ defines shared with v4l and media drivers. + */ + const u32 *bus_formats; + /** + * @num_bus_formats: Size of @bus_formats array. + */ + unsigned int num_bus_formats; + + /** + * @bus_flags: Additional information (like pixel signal polarity) for + * the pixel data on the bus, using &enum drm_bus_flags values + * DRM_BUS_FLAGS\_. + */ + u32 bus_flags; + + /** + * @max_tmds_clock: Maximum TMDS clock rate supported by the + * sink in kHz. 0 means undefined. + */ + int max_tmds_clock; + + /** + * @dvi_dual: Dual-link DVI sink? + */ + bool dvi_dual; + + /** + * @is_hdmi: True if the sink is an HDMI device. + * + * This field shall be used instead of calling + * drm_detect_hdmi_monitor() when possible. + */ + bool is_hdmi; + + /** + * @has_hdmi_infoframe: Does the sink support the HDMI infoframe? + */ + bool has_hdmi_infoframe; + + /** + * @rgb_quant_range_selectable: Does the sink support selecting + * the RGB quantization range? + */ + bool rgb_quant_range_selectable; + + /** + * @edid_hdmi_dc_modes: Mask of supported hdmi deep color modes. Even + * more stuff redundant with @bus_formats. + */ + u8 edid_hdmi_dc_modes; + + /** + * @cea_rev: CEA revision of the HDMI sink. + */ + u8 cea_rev; + + /** + * @hdmi: advance features of a HDMI sink. + */ + struct drm_hdmi_info hdmi; + + /** + * @non_desktop: Non desktop display (HMD). + */ + bool non_desktop; + + /** + * @monitor_range: Frequency range supported by monitor range descriptor + */ + struct drm_monitor_range_info monitor_range; +}; + +int drm_display_info_set_bus_formats(struct drm_display_info *info, + const u32 *formats, + unsigned int num_formats); + +/** + * struct drm_connector_tv_margins - TV connector related margins + * + * Describes the margins in pixels to put around the image on TV + * connectors to deal with overscan. + */ +struct drm_connector_tv_margins { + /** + * @bottom: Bottom margin in pixels. + */ + unsigned int bottom; + + /** + * @left: Left margin in pixels. + */ + unsigned int left; + + /** + * @right: Right margin in pixels. + */ + unsigned int right; + + /** + * @top: Top margin in pixels. + */ + unsigned int top; +}; + +/** + * struct drm_tv_connector_state - TV connector related states + * @subconnector: selected subconnector + * @margins: TV margins + * @mode: TV mode + * @brightness: brightness in percent + * @contrast: contrast in percent + * @flicker_reduction: flicker reduction in percent + * @overscan: overscan in percent + * @saturation: saturation in percent + * @hue: hue in percent + */ +struct drm_tv_connector_state { + enum drm_mode_subconnector subconnector; + struct drm_connector_tv_margins margins; + unsigned int mode; + unsigned int brightness; + unsigned int contrast; + unsigned int flicker_reduction; + unsigned int overscan; + unsigned int saturation; + unsigned int hue; +}; + +/** + * struct drm_connector_state - mutable connector state + */ +struct drm_connector_state { + /** @connector: backpointer to the connector */ + struct drm_connector *connector; + + /** + * @crtc: CRTC to connect connector to, NULL if disabled. + * + * Do not change this directly, use drm_atomic_set_crtc_for_connector() + * instead. + */ + struct drm_crtc *crtc; + + /** + * @best_encoder: + * + * Used by the atomic helpers to select the encoder, through the + * &drm_connector_helper_funcs.atomic_best_encoder or + * &drm_connector_helper_funcs.best_encoder callbacks. + * + * This is also used in the atomic helpers to map encoders to their + * current and previous connectors, see + * drm_atomic_get_old_connector_for_encoder() and + * drm_atomic_get_new_connector_for_encoder(). + * + * NOTE: Atomic drivers must fill this out (either themselves or through + * helpers), for otherwise the GETCONNECTOR and GETENCODER IOCTLs will + * not return correct data to userspace. + */ + struct drm_encoder *best_encoder; + + /** + * @link_status: Connector link_status to keep track of whether link is + * GOOD or BAD to notify userspace if retraining is necessary. + */ + enum drm_link_status link_status; + + /** @state: backpointer to global drm_atomic_state */ + struct drm_atomic_state *state; + + /** + * @commit: Tracks the pending commit to prevent use-after-free conditions. + * + * Is only set when @crtc is NULL. + */ + struct drm_crtc_commit *commit; + + /** @tv: TV connector state */ + struct drm_tv_connector_state tv; + + /** + * @self_refresh_aware: + * + * This tracks whether a connector is aware of the self refresh state. + * It should be set to true for those connector implementations which + * understand the self refresh state. This is needed since the crtc + * registers the self refresh helpers and it doesn't know if the + * connectors downstream have implemented self refresh entry/exit. + * + * Drivers should set this to true in atomic_check if they know how to + * handle self_refresh requests. + */ + bool self_refresh_aware; + + /** + * @picture_aspect_ratio: Connector property to control the + * HDMI infoframe aspect ratio setting. + * + * The %DRM_MODE_PICTURE_ASPECT_\* values much match the + * values for &enum hdmi_picture_aspect + */ + enum hdmi_picture_aspect picture_aspect_ratio; + + /** + * @content_type: Connector property to control the + * HDMI infoframe content type setting. + * The %DRM_MODE_CONTENT_TYPE_\* values much + * match the values. + */ + unsigned int content_type; + + /** + * @hdcp_content_type: Connector property to pass the type of + * protected content. This is most commonly used for HDCP. + */ + unsigned int hdcp_content_type; + + /** + * @scaling_mode: Connector property to control the + * upscaling, mostly used for built-in panels. + */ + unsigned int scaling_mode; + + /** + * @content_protection: Connector property to request content + * protection. This is most commonly used for HDCP. + */ + unsigned int content_protection; + + /** + * @colorspace: State variable for Connector property to request + * colorspace change on Sink. This is most commonly used to switch + * to wider color gamuts like BT2020. + */ + u32 colorspace; + + /** + * @writeback_job: Writeback job for writeback connectors + * + * Holds the framebuffer and out-fence for a writeback connector. As + * the writeback completion may be asynchronous to the normal commit + * cycle, the writeback job lifetime is managed separately from the + * normal atomic state by this object. + * + * See also: drm_writeback_queue_job() and + * drm_writeback_signal_completion() + */ + struct drm_writeback_job *writeback_job; + + /** + * @max_requested_bpc: Connector property to limit the maximum bit + * depth of the pixels. + */ + u8 max_requested_bpc; + + /** + * @max_bpc: Connector max_bpc based on the requested max_bpc property + * and the connector bpc limitations obtained from edid. + */ + u8 max_bpc; + + /** + * @hdr_output_metadata: + * DRM blob property for HDR output metadata + */ + struct drm_property_blob *hdr_output_metadata; +}; + +/** + * struct drm_connector_funcs - control connectors on a given device + * + * Each CRTC may have one or more connectors attached to it. The functions + * below allow the core DRM code to control connectors, enumerate available modes, + * etc. + */ +struct drm_connector_funcs { + /** + * @dpms: + * + * Legacy entry point to set the per-connector DPMS state. Legacy DPMS + * is exposed as a standard property on the connector, but diverted to + * this callback in the drm core. Note that atomic drivers don't + * implement the 4 level DPMS support on the connector any more, but + * instead only have an on/off "ACTIVE" property on the CRTC object. + * + * This hook is not used by atomic drivers, remapping of the legacy DPMS + * property is entirely handled in the DRM core. + * + * RETURNS: + * + * 0 on success or a negative error code on failure. + */ + int (*dpms)(struct drm_connector *connector, int mode); + + /** + * @reset: + * + * Reset connector hardware and software state to off. This function isn't + * called by the core directly, only through drm_mode_config_reset(). + * It's not a helper hook only for historical reasons. + * + * Atomic drivers can use drm_atomic_helper_connector_reset() to reset + * atomic state using this hook. + */ + void (*reset)(struct drm_connector *connector); + + /** + * @detect: + * + * Check to see if anything is attached to the connector. The parameter + * force is set to false whilst polling, true when checking the + * connector due to a user request. force can be used by the driver to + * avoid expensive, destructive operations during automated probing. + * + * This callback is optional, if not implemented the connector will be + * considered as always being attached. + * + * FIXME: + * + * Note that this hook is only called by the probe helper. It's not in + * the helper library vtable purely for historical reasons. The only DRM + * core entry point to probe connector state is @fill_modes. + * + * Note that the helper library will already hold + * &drm_mode_config.connection_mutex. Drivers which need to grab additional + * locks to avoid races with concurrent modeset changes need to use + * &drm_connector_helper_funcs.detect_ctx instead. + * + * RETURNS: + * + * drm_connector_status indicating the connector's status. + */ + enum drm_connector_status (*detect)(struct drm_connector *connector, + bool force); + + /** + * @force: + * + * This function is called to update internal encoder state when the + * connector is forced to a certain state by userspace, either through + * the sysfs interfaces or on the kernel cmdline. In that case the + * @detect callback isn't called. + * + * FIXME: + * + * Note that this hook is only called by the probe helper. It's not in + * the helper library vtable purely for historical reasons. The only DRM + * core entry point to probe connector state is @fill_modes. + */ + void (*force)(struct drm_connector *connector); + + /** + * @fill_modes: + * + * Entry point for output detection and basic mode validation. The + * driver should reprobe the output if needed (e.g. when hotplug + * handling is unreliable), add all detected modes to &drm_connector.modes + * and filter out any the device can't support in any configuration. It + * also needs to filter out any modes wider or higher than the + * parameters max_width and max_height indicate. + * + * The drivers must also prune any modes no longer valid from + * &drm_connector.modes. Furthermore it must update + * &drm_connector.status and &drm_connector.edid. If no EDID has been + * received for this output connector->edid must be NULL. + * + * Drivers using the probe helpers should use + * drm_helper_probe_single_connector_modes() to implement this + * function. + * + * RETURNS: + * + * The number of modes detected and filled into &drm_connector.modes. + */ + int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height); + + /** + * @set_property: + * + * This is the legacy entry point to update a property attached to the + * connector. + * + * This callback is optional if the driver does not support any legacy + * driver-private properties. For atomic drivers it is not used because + * property handling is done entirely in the DRM core. + * + * RETURNS: + * + * 0 on success or a negative error code on failure. + */ + int (*set_property)(struct drm_connector *connector, struct drm_property *property, + uint64_t val); + + /** + * @late_register: + * + * This optional hook can be used to register additional userspace + * interfaces attached to the connector, light backlight control, i2c, + * DP aux or similar interfaces. It is called late in the driver load + * sequence from drm_connector_register() when registering all the + * core drm connector interfaces. Everything added from this callback + * should be unregistered in the early_unregister callback. + * + * This is called while holding &drm_connector.mutex. + * + * Returns: + * + * 0 on success, or a negative error code on failure. + */ + int (*late_register)(struct drm_connector *connector); + + /** + * @early_unregister: + * + * This optional hook should be used to unregister the additional + * userspace interfaces attached to the connector from + * late_register(). It is called from drm_connector_unregister(), + * early in the driver unload sequence to disable userspace access + * before data structures are torndown. + * + * This is called while holding &drm_connector.mutex. + */ + void (*early_unregister)(struct drm_connector *connector); + + /** + * @destroy: + * + * Clean up connector resources. This is called at driver unload time + * through drm_mode_config_cleanup(). It can also be called at runtime + * when a connector is being hot-unplugged for drivers that support + * connector hotplugging (e.g. DisplayPort MST). + */ + void (*destroy)(struct drm_connector *connector); + + /** + * @atomic_duplicate_state: + * + * Duplicate the current atomic state for this connector and return it. + * The core and helpers guarantee that any atomic state duplicated with + * this hook and still owned by the caller (i.e. not transferred to the + * driver by calling &drm_mode_config_funcs.atomic_commit) will be + * cleaned up by calling the @atomic_destroy_state hook in this + * structure. + * + * This callback is mandatory for atomic drivers. + * + * Atomic drivers which don't subclass &struct drm_connector_state should use + * drm_atomic_helper_connector_duplicate_state(). Drivers that subclass the + * state structure to extend it with driver-private state should use + * __drm_atomic_helper_connector_duplicate_state() to make sure shared state is + * duplicated in a consistent fashion across drivers. + * + * It is an error to call this hook before &drm_connector.state has been + * initialized correctly. + * + * NOTE: + * + * If the duplicate state references refcounted resources this hook must + * acquire a reference for each of them. The driver must release these + * references again in @atomic_destroy_state. + * + * RETURNS: + * + * Duplicated atomic state or NULL when the allocation failed. + */ + struct drm_connector_state *(*atomic_duplicate_state)(struct drm_connector *connector); + + /** + * @atomic_destroy_state: + * + * Destroy a state duplicated with @atomic_duplicate_state and release + * or unreference all resources it references + * + * This callback is mandatory for atomic drivers. + */ + void (*atomic_destroy_state)(struct drm_connector *connector, + struct drm_connector_state *state); + + /** + * @atomic_set_property: + * + * Decode a driver-private property value and store the decoded value + * into the passed-in state structure. Since the atomic core decodes all + * standardized properties (even for extensions beyond the core set of + * properties which might not be implemented by all drivers) this + * requires drivers to subclass the state structure. + * + * Such driver-private properties should really only be implemented for + * truly hardware/vendor specific state. Instead it is preferred to + * standardize atomic extension and decode the properties used to expose + * such an extension in the core. + * + * Do not call this function directly, use + * drm_atomic_connector_set_property() instead. + * + * This callback is optional if the driver does not support any + * driver-private atomic properties. + * + * NOTE: + * + * This function is called in the state assembly phase of atomic + * modesets, which can be aborted for any reason (including on + * userspace's request to just check whether a configuration would be + * possible). Drivers MUST NOT touch any persistent state (hardware or + * software) or data structures except the passed in @state parameter. + * + * Also since userspace controls in which order properties are set this + * function must not do any input validation (since the state update is + * incomplete and hence likely inconsistent). Instead any such input + * validation must be done in the various atomic_check callbacks. + * + * RETURNS: + * + * 0 if the property has been found, -EINVAL if the property isn't + * implemented by the driver (which shouldn't ever happen, the core only + * asks for properties attached to this connector). No other validation + * is allowed by the driver. The core already checks that the property + * value is within the range (integer, valid enum value, ...) the driver + * set when registering the property. + */ + int (*atomic_set_property)(struct drm_connector *connector, + struct drm_connector_state *state, + struct drm_property *property, + uint64_t val); + + /** + * @atomic_get_property: + * + * Reads out the decoded driver-private property. This is used to + * implement the GETCONNECTOR IOCTL. + * + * Do not call this function directly, use + * drm_atomic_connector_get_property() instead. + * + * This callback is optional if the driver does not support any + * driver-private atomic properties. + * + * RETURNS: + * + * 0 on success, -EINVAL if the property isn't implemented by the + * driver (which shouldn't ever happen, the core only asks for + * properties attached to this connector). + */ + int (*atomic_get_property)(struct drm_connector *connector, + const struct drm_connector_state *state, + struct drm_property *property, + uint64_t *val); + + /** + * @atomic_print_state: + * + * If driver subclasses &struct drm_connector_state, it should implement + * this optional hook for printing additional driver specific state. + * + * Do not call this directly, use drm_atomic_connector_print_state() + * instead. + */ + void (*atomic_print_state)(struct drm_printer *p, + const struct drm_connector_state *state); + + /** + * @oob_hotplug_event: + * + * This will get called when a hotplug-event for a drm-connector + * has been received from a source outside the display driver / device. + */ + void (*oob_hotplug_event)(struct drm_connector *connector); +}; + +/** + * struct drm_cmdline_mode - DRM Mode passed through the kernel command-line + * + * Each connector can have an initial mode with additional options + * passed through the kernel command line. This structure allows to + * express those parameters and will be filled by the command-line + * parser. + */ +struct drm_cmdline_mode { + /** + * @name: + * + * Name of the mode. + */ + char name[DRM_DISPLAY_MODE_LEN]; + + /** + * @specified: + * + * Has a mode been read from the command-line? + */ + bool specified; + + /** + * @refresh_specified: + * + * Did the mode have a preferred refresh rate? + */ + bool refresh_specified; + + /** + * @bpp_specified: + * + * Did the mode have a preferred BPP? + */ + bool bpp_specified; + + /** + * @xres: + * + * Active resolution on the X axis, in pixels. + */ + int xres; + + /** + * @yres: + * + * Active resolution on the Y axis, in pixels. + */ + int yres; + + /** + * @bpp: + * + * Bits per pixels for the mode. + */ + int bpp; + + /** + * @refresh: + * + * Refresh rate, in Hertz. + */ + int refresh; + + /** + * @rb: + * + * Do we need to use reduced blanking? + */ + bool rb; + + /** + * @interlace: + * + * The mode is interlaced. + */ + bool interlace; + + /** + * @cvt: + * + * The timings will be calculated using the VESA Coordinated + * Video Timings instead of looking up the mode from a table. + */ + bool cvt; + + /** + * @margins: + * + * Add margins to the mode calculation (1.8% of xres rounded + * down to 8 pixels and 1.8% of yres). + */ + bool margins; + + /** + * @force: + * + * Ignore the hotplug state of the connector, and force its + * state to one of the DRM_FORCE_* values. + */ + enum drm_connector_force force; + + /** + * @rotation_reflection: + * + * Initial rotation and reflection of the mode setup from the + * command line. See DRM_MODE_ROTATE_* and + * DRM_MODE_REFLECT_*. The only rotations supported are + * DRM_MODE_ROTATE_0 and DRM_MODE_ROTATE_180. + */ + unsigned int rotation_reflection; + + /** + * @panel_orientation: + * + * drm-connector "panel orientation" property override value, + * DRM_MODE_PANEL_ORIENTATION_UNKNOWN if not set. + */ + enum drm_panel_orientation panel_orientation; + + /** + * @tv_margins: TV margins to apply to the mode. + */ + struct drm_connector_tv_margins tv_margins; +}; + +/** + * struct drm_connector - central DRM connector control structure + * + * Each connector may be connected to one or more CRTCs, or may be clonable by + * another connector if they can share a CRTC. Each connector also has a specific + * position in the broader display (referred to as a 'screen' though it could + * span multiple monitors). + */ +struct drm_connector { + /** @dev: parent DRM device */ + struct drm_device *dev; + /** @kdev: kernel device for sysfs attributes */ + struct device *kdev; + /** @attr: sysfs attributes */ + struct device_attribute *attr; + /** + * @fwnode: associated fwnode supplied by platform firmware + * + * Drivers can set this to associate a fwnode with a connector, drivers + * are expected to get a reference on the fwnode when setting this. + * drm_connector_cleanup() will call fwnode_handle_put() on this. + */ + struct fwnode_handle *fwnode; + + /** + * @head: + * + * List of all connectors on a @dev, linked from + * &drm_mode_config.connector_list. Protected by + * &drm_mode_config.connector_list_lock, but please only use + * &drm_connector_list_iter to walk this list. + */ + struct list_head head; + + /** + * @global_connector_list_entry: + * + * Connector entry in the global connector-list, used by + * drm_connector_find_by_fwnode(). + */ + struct list_head global_connector_list_entry; + + /** @base: base KMS object */ + struct drm_mode_object base; + + /** @name: human readable name, can be overwritten by the driver */ + char *name; + + /** + * @mutex: Lock for general connector state, but currently only protects + * @registered. Most of the connector state is still protected by + * &drm_mode_config.mutex. + */ + struct mutex mutex; + + /** + * @index: Compacted connector index, which matches the position inside + * the mode_config.list for drivers not supporting hot-add/removing. Can + * be used as an array index. It is invariant over the lifetime of the + * connector. + */ + unsigned index; + + /** + * @connector_type: + * one of the DRM_MODE_CONNECTOR_<foo> types from drm_mode.h + */ + int connector_type; + /** @connector_type_id: index into connector type enum */ + int connector_type_id; + /** + * @interlace_allowed: + * Can this connector handle interlaced modes? Only used by + * drm_helper_probe_single_connector_modes() for mode filtering. + */ + bool interlace_allowed; + /** + * @doublescan_allowed: + * Can this connector handle doublescan? Only used by + * drm_helper_probe_single_connector_modes() for mode filtering. + */ + bool doublescan_allowed; + /** + * @stereo_allowed: + * Can this connector handle stereo modes? Only used by + * drm_helper_probe_single_connector_modes() for mode filtering. + */ + bool stereo_allowed; + + /** + * @ycbcr_420_allowed : This bool indicates if this connector is + * capable of handling YCBCR 420 output. While parsing the EDID + * blocks it's very helpful to know if the source is capable of + * handling YCBCR 420 outputs. + */ + bool ycbcr_420_allowed; + + /** + * @registration_state: Is this connector initializing, exposed + * (registered) with userspace, or unregistered? + * + * Protected by @mutex. + */ + enum drm_connector_registration_state registration_state; + + /** + * @modes: + * Modes available on this connector (from fill_modes() + user). + * Protected by &drm_mode_config.mutex. + */ + struct list_head modes; + + /** + * @status: + * One of the drm_connector_status enums (connected, not, or unknown). + * Protected by &drm_mode_config.mutex. + */ + enum drm_connector_status status; + + /** + * @probed_modes: + * These are modes added by probing with DDC or the BIOS, before + * filtering is applied. Used by the probe helpers. Protected by + * &drm_mode_config.mutex. + */ + struct list_head probed_modes; + + /** + * @display_info: Display information is filled from EDID information + * when a display is detected. For non hot-pluggable displays such as + * flat panels in embedded systems, the driver should initialize the + * &drm_display_info.width_mm and &drm_display_info.height_mm fields + * with the physical size of the display. + * + * Protected by &drm_mode_config.mutex. + */ + struct drm_display_info display_info; + + /** @funcs: connector control functions */ + const struct drm_connector_funcs *funcs; + + /** + * @edid_blob_ptr: DRM property containing EDID if present. Protected by + * &drm_mode_config.mutex. This should be updated only by calling + * drm_connector_update_edid_property(). + */ + struct drm_property_blob *edid_blob_ptr; + + /** @properties: property tracking for this connector */ + struct drm_object_properties properties; + + /** + * @scaling_mode_property: Optional atomic property to control the + * upscaling. See drm_connector_attach_content_protection_property(). + */ + struct drm_property *scaling_mode_property; + + /** + * @vrr_capable_property: Optional property to help userspace + * query hardware support for variable refresh rate on a connector. + * connector. Drivers can add the property to a connector by + * calling drm_connector_attach_vrr_capable_property(). + * + * This should be updated only by calling + * drm_connector_set_vrr_capable_property(). + */ + struct drm_property *vrr_capable_property; + + /** + * @colorspace_property: Connector property to set the suitable + * colorspace supported by the sink. + */ + struct drm_property *colorspace_property; + + /** + * @path_blob_ptr: + * + * DRM blob property data for the DP MST path property. This should only + * be updated by calling drm_connector_set_path_property(). + */ + struct drm_property_blob *path_blob_ptr; + + /** + * @max_bpc_property: Default connector property for the max bpc to be + * driven out of the connector. + */ + struct drm_property *max_bpc_property; + +#define DRM_CONNECTOR_POLL_HPD (1 << 0) +#define DRM_CONNECTOR_POLL_CONNECT (1 << 1) +#define DRM_CONNECTOR_POLL_DISCONNECT (1 << 2) + + /** + * @polled: + * + * Connector polling mode, a combination of + * + * DRM_CONNECTOR_POLL_HPD + * The connector generates hotplug events and doesn't need to be + * periodically polled. The CONNECT and DISCONNECT flags must not + * be set together with the HPD flag. + * + * DRM_CONNECTOR_POLL_CONNECT + * Periodically poll the connector for connection. + * + * DRM_CONNECTOR_POLL_DISCONNECT + * Periodically poll the connector for disconnection, without + * causing flickering even when the connector is in use. DACs should + * rarely do this without a lot of testing. + * + * Set to 0 for connectors that don't support connection status + * discovery. + */ + uint8_t polled; + + /** + * @dpms: Current dpms state. For legacy drivers the + * &drm_connector_funcs.dpms callback must update this. For atomic + * drivers, this is handled by the core atomic code, and drivers must + * only take &drm_crtc_state.active into account. + */ + int dpms; + + /** @helper_private: mid-layer private data */ + const struct drm_connector_helper_funcs *helper_private; + + /** @cmdline_mode: mode line parsed from the kernel cmdline for this connector */ + struct drm_cmdline_mode cmdline_mode; + /** @force: a DRM_FORCE_<foo> state for forced mode sets */ + enum drm_connector_force force; + /** @override_edid: has the EDID been overwritten through debugfs for testing? */ + bool override_edid; + /** @epoch_counter: used to detect any other changes in connector, besides status */ + u64 epoch_counter; + + /** + * @possible_encoders: Bit mask of encoders that can drive this + * connector, drm_encoder_index() determines the index into the bitfield + * and the bits are set with drm_connector_attach_encoder(). + */ + u32 possible_encoders; + + /** + * @encoder: Currently bound encoder driving this connector, if any. + * Only really meaningful for non-atomic drivers. Atomic drivers should + * instead look at &drm_connector_state.best_encoder, and in case they + * need the CRTC driving this output, &drm_connector_state.crtc. + */ + struct drm_encoder *encoder; + +#define MAX_ELD_BYTES 128 + /** @eld: EDID-like data, if present */ + uint8_t eld[MAX_ELD_BYTES]; + /** @latency_present: AV delay info from ELD, if found */ + bool latency_present[2]; + /** + * @video_latency: Video latency info from ELD, if found. + * [0]: progressive, [1]: interlaced + */ + int video_latency[2]; + /** + * @audio_latency: audio latency info from ELD, if found + * [0]: progressive, [1]: interlaced + */ + int audio_latency[2]; + + /** + * @ddc: associated ddc adapter. + * A connector usually has its associated ddc adapter. If a driver uses + * this field, then an appropriate symbolic link is created in connector + * sysfs directory to make it easy for the user to tell which i2c + * adapter is for a particular display. + * + * The field should be set by calling drm_connector_init_with_ddc(). + */ + struct i2c_adapter *ddc; + + /** + * @null_edid_counter: track sinks that give us all zeros for the EDID. + * Needed to workaround some HW bugs where we get all 0s + */ + int null_edid_counter; + + /** @bad_edid_counter: track sinks that give us an EDID with invalid checksum */ + unsigned bad_edid_counter; + + /** + * @edid_corrupt: Indicates whether the last read EDID was corrupt. Used + * in Displayport compliance testing - Displayport Link CTS Core 1.2 + * rev1.1 4.2.2.6 + */ + bool edid_corrupt; + /** + * @real_edid_checksum: real edid checksum for corrupted edid block. + * Required in Displayport 1.4 compliance testing + * rev1.1 4.2.2.6 + */ + u8 real_edid_checksum; + + /** @debugfs_entry: debugfs directory for this connector */ + struct dentry *debugfs_entry; + + /** + * @state: + * + * Current atomic state for this connector. + * + * This is protected by &drm_mode_config.connection_mutex. Note that + * nonblocking atomic commits access the current connector state without + * taking locks. Either by going through the &struct drm_atomic_state + * pointers, see for_each_oldnew_connector_in_state(), + * for_each_old_connector_in_state() and + * for_each_new_connector_in_state(). Or through careful ordering of + * atomic commit operations as implemented in the atomic helpers, see + * &struct drm_crtc_commit. + */ + struct drm_connector_state *state; + + /* DisplayID bits. FIXME: Extract into a substruct? */ + + /** + * @tile_blob_ptr: + * + * DRM blob property data for the tile property (used mostly by DP MST). + * This is meant for screens which are driven through separate display + * pipelines represented by &drm_crtc, which might not be running with + * genlocked clocks. For tiled panels which are genlocked, like + * dual-link LVDS or dual-link DSI, the driver should try to not expose + * the tiling and virtualize both &drm_crtc and &drm_plane if needed. + * + * This should only be updated by calling + * drm_connector_set_tile_property(). + */ + struct drm_property_blob *tile_blob_ptr; + + /** @has_tile: is this connector connected to a tiled monitor */ + bool has_tile; + /** @tile_group: tile group for the connected monitor */ + struct drm_tile_group *tile_group; + /** @tile_is_single_monitor: whether the tile is one monitor housing */ + bool tile_is_single_monitor; + + /** @num_h_tile: number of horizontal tiles in the tile group */ + /** @num_v_tile: number of vertical tiles in the tile group */ + uint8_t num_h_tile, num_v_tile; + /** @tile_h_loc: horizontal location of this tile */ + /** @tile_v_loc: vertical location of this tile */ + uint8_t tile_h_loc, tile_v_loc; + /** @tile_h_size: horizontal size of this tile. */ + /** @tile_v_size: vertical size of this tile. */ + uint16_t tile_h_size, tile_v_size; + + /** + * @free_node: + * + * List used only by &drm_connector_list_iter to be able to clean up a + * connector from any context, in conjunction with + * &drm_mode_config.connector_free_work. + */ + struct llist_node free_node; + + /** @hdr_sink_metadata: HDR Metadata Information read from sink */ + struct hdr_sink_metadata hdr_sink_metadata; +}; + +#define obj_to_connector(x) container_of(x, struct drm_connector, base) + +int drm_connector_init(struct drm_device *dev, + struct drm_connector *connector, + const struct drm_connector_funcs *funcs, + int connector_type); +int drm_connector_init_with_ddc(struct drm_device *dev, + struct drm_connector *connector, + const struct drm_connector_funcs *funcs, + int connector_type, + struct i2c_adapter *ddc); +void drm_connector_attach_edid_property(struct drm_connector *connector); +int drm_connector_register(struct drm_connector *connector); +void drm_connector_unregister(struct drm_connector *connector); +int drm_connector_attach_encoder(struct drm_connector *connector, + struct drm_encoder *encoder); + +void drm_connector_cleanup(struct drm_connector *connector); + +static inline unsigned int drm_connector_index(const struct drm_connector *connector) +{ + return connector->index; +} + +static inline u32 drm_connector_mask(const struct drm_connector *connector) +{ + return 1 << connector->index; +} + +/** + * drm_connector_lookup - lookup connector object + * @dev: DRM device + * @file_priv: drm file to check for lease against. + * @id: connector object id + * + * This function looks up the connector object specified by id + * add takes a reference to it. + */ +static inline struct drm_connector *drm_connector_lookup(struct drm_device *dev, + struct drm_file *file_priv, + uint32_t id) +{ + struct drm_mode_object *mo; + mo = drm_mode_object_find(dev, file_priv, id, DRM_MODE_OBJECT_CONNECTOR); + return mo ? obj_to_connector(mo) : NULL; +} + +/** + * drm_connector_get - acquire a connector reference + * @connector: DRM connector + * + * This function increments the connector's refcount. + */ +static inline void drm_connector_get(struct drm_connector *connector) +{ + drm_mode_object_get(&connector->base); +} + +/** + * drm_connector_put - release a connector reference + * @connector: DRM connector + * + * This function decrements the connector's reference count and frees the + * object if the reference count drops to zero. + */ +static inline void drm_connector_put(struct drm_connector *connector) +{ + drm_mode_object_put(&connector->base); +} + +/** + * drm_connector_is_unregistered - has the connector been unregistered from + * userspace? + * @connector: DRM connector + * + * Checks whether or not @connector has been unregistered from userspace. + * + * Returns: + * True if the connector was unregistered, false if the connector is + * registered or has not yet been registered with userspace. + */ +static inline bool +drm_connector_is_unregistered(struct drm_connector *connector) +{ + return READ_ONCE(connector->registration_state) == + DRM_CONNECTOR_UNREGISTERED; +} + +void drm_connector_oob_hotplug_event(struct fwnode_handle *connector_fwnode); +const char *drm_get_connector_type_name(unsigned int connector_type); +const char *drm_get_connector_status_name(enum drm_connector_status status); +const char *drm_get_subpixel_order_name(enum subpixel_order order); +const char *drm_get_dpms_name(int val); +const char *drm_get_dvi_i_subconnector_name(int val); +const char *drm_get_dvi_i_select_name(int val); +const char *drm_get_tv_subconnector_name(int val); +const char *drm_get_tv_select_name(int val); +const char *drm_get_dp_subconnector_name(int val); +const char *drm_get_content_protection_name(int val); +const char *drm_get_hdcp_content_type_name(int val); + +int drm_mode_create_dvi_i_properties(struct drm_device *dev); +void drm_connector_attach_dp_subconnector_property(struct drm_connector *connector); + +int drm_mode_create_tv_margin_properties(struct drm_device *dev); +int drm_mode_create_tv_properties(struct drm_device *dev, + unsigned int num_modes, + const char * const modes[]); +void drm_connector_attach_tv_margin_properties(struct drm_connector *conn); +int drm_mode_create_scaling_mode_property(struct drm_device *dev); +int drm_connector_attach_content_type_property(struct drm_connector *dev); +int drm_connector_attach_scaling_mode_property(struct drm_connector *connector, + u32 scaling_mode_mask); +int drm_connector_attach_vrr_capable_property( + struct drm_connector *connector); +int drm_mode_create_aspect_ratio_property(struct drm_device *dev); +int drm_mode_create_hdmi_colorspace_property(struct drm_connector *connector); +int drm_mode_create_dp_colorspace_property(struct drm_connector *connector); +int drm_mode_create_content_type_property(struct drm_device *dev); +void drm_hdmi_avi_infoframe_content_type(struct hdmi_avi_infoframe *frame, + const struct drm_connector_state *conn_state); + +int drm_mode_create_suggested_offset_properties(struct drm_device *dev); + +int drm_connector_set_path_property(struct drm_connector *connector, + const char *path); +int drm_connector_set_tile_property(struct drm_connector *connector); +int drm_connector_update_edid_property(struct drm_connector *connector, + const struct edid *edid); +void drm_connector_set_link_status_property(struct drm_connector *connector, + uint64_t link_status); +void drm_connector_set_vrr_capable_property( + struct drm_connector *connector, bool capable); +int drm_connector_set_panel_orientation( + struct drm_connector *connector, + enum drm_panel_orientation panel_orientation); +int drm_connector_set_panel_orientation_with_quirk( + struct drm_connector *connector, + enum drm_panel_orientation panel_orientation, + int width, int height); +int drm_connector_attach_max_bpc_property(struct drm_connector *connector, + int min, int max); + +/** + * struct drm_tile_group - Tile group metadata + * @refcount: reference count + * @dev: DRM device + * @id: tile group id exposed to userspace + * @group_data: Sink-private data identifying this group + * + * @group_data corresponds to displayid vend/prod/serial for external screens + * with an EDID. + */ +struct drm_tile_group { + struct kref refcount; + struct drm_device *dev; + int id; + u8 group_data[8]; +}; + +struct drm_tile_group *drm_mode_create_tile_group(struct drm_device *dev, + const char topology[8]); +struct drm_tile_group *drm_mode_get_tile_group(struct drm_device *dev, + const char topology[8]); +void drm_mode_put_tile_group(struct drm_device *dev, + struct drm_tile_group *tg); + +/** + * struct drm_connector_list_iter - connector_list iterator + * + * This iterator tracks state needed to be able to walk the connector_list + * within struct drm_mode_config. Only use together with + * drm_connector_list_iter_begin(), drm_connector_list_iter_end() and + * drm_connector_list_iter_next() respectively the convenience macro + * drm_for_each_connector_iter(). + */ +struct drm_connector_list_iter { +/* private: */ + struct drm_device *dev; + struct drm_connector *conn; +}; + +void drm_connector_list_iter_begin(struct drm_device *dev, + struct drm_connector_list_iter *iter); +struct drm_connector * +drm_connector_list_iter_next(struct drm_connector_list_iter *iter); +void drm_connector_list_iter_end(struct drm_connector_list_iter *iter); + +bool drm_connector_has_possible_encoder(struct drm_connector *connector, + struct drm_encoder *encoder); + +/** + * drm_for_each_connector_iter - connector_list iterator macro + * @connector: &struct drm_connector pointer used as cursor + * @iter: &struct drm_connector_list_iter + * + * Note that @connector is only valid within the list body, if you want to use + * @connector after calling drm_connector_list_iter_end() then you need to grab + * your own reference first using drm_connector_get(). + */ +#define drm_for_each_connector_iter(connector, iter) \ + while ((connector = drm_connector_list_iter_next(iter))) + +/** + * drm_connector_for_each_possible_encoder - iterate connector's possible encoders + * @connector: &struct drm_connector pointer + * @encoder: &struct drm_encoder pointer used as cursor + */ +#define drm_connector_for_each_possible_encoder(connector, encoder) \ + drm_for_each_encoder_mask(encoder, (connector)->dev, \ + (connector)->possible_encoders) + +#endif |