1 files changed, 279 insertions, 0 deletions
diff --git a/include/drm/drm_encoder.h b/include/drm/drm_encoder.h
new file mode 100644
index 000000000..a60f5f155
--- /dev/null
+++ b/include/drm/drm_encoder.h
@@ -0,0 +1,279 @@
+/*
+ * Copyright (c) 2016 Intel Corporation
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission.  The copyright holders make no representations
+ * about the suitability of this software for any purpose.  It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ */
+
+#ifndef __DRM_ENCODER_H__
+#define __DRM_ENCODER_H__
+
+#include <linux/list.h>
+#include <linux/ctype.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_mode.h>
+#include <drm/drm_mode_object.h>
+#include <drm/drm_util.h>
+
+struct drm_encoder;
+
+/**
+ * struct drm_encoder_funcs - encoder controls
+ *
+ * Encoders sit between CRTCs and connectors.
+ */
+struct drm_encoder_funcs {
+	/**
+	 * @reset:
+	 *
+	 * Reset encoder hardware and software state to off. This function isn't
+	 * called by the core directly, only through drm_mode_config_reset().
+	 * It's not a helper hook only for historical reasons.
+	 */
+	void (*reset)(struct drm_encoder *encoder);
+
+	/**
+	 * @destroy:
+	 *
+	 * Clean up encoder resources. This is only called at driver unload time
+	 * through drm_mode_config_cleanup() since an encoder cannot be
+	 * hotplugged in DRM.
+	 */
+	void (*destroy)(struct drm_encoder *encoder);
+
+	/**
+	 * @late_register:
+	 *
+	 * This optional hook can be used to register additional userspace
+	 * interfaces attached to the encoder like debugfs interfaces.
+	 * It is called late in the driver load sequence from drm_dev_register().
+	 * Everything added from this callback should be unregistered in
+	 * the early_unregister callback.
+	 *
+	 * Returns:
+	 *
+	 * 0 on success, or a negative error code on failure.
+	 */
+	int (*late_register)(struct drm_encoder *encoder);
+
+	/**
+	 * @early_unregister:
+	 *
+	 * This optional hook should be used to unregister the additional
+	 * userspace interfaces attached to the encoder from
+	 * @late_register. It is called from drm_dev_unregister(),
+	 * early in the driver unload sequence to disable userspace access
+	 * before data structures are torndown.
+	 */
+	void (*early_unregister)(struct drm_encoder *encoder);
+};
+
+/**
+ * struct drm_encoder - central DRM encoder structure
+ * @dev: parent DRM device
+ * @head: list management
+ * @base: base KMS object
+ * @name: human readable name, can be overwritten by the driver
+ * @bridge: bridge associated to the encoder
+ * @funcs: control functions
+ * @helper_private: mid-layer private data
+ *
+ * CRTCs drive pixels to encoders, which convert them into signals
+ * appropriate for a given connector or set of connectors.
+ */
+struct drm_encoder {
+	struct drm_device *dev;
+	struct list_head head;
+
+	struct drm_mode_object base;
+	char *name;
+	/**
+	 * @encoder_type:
+	 *
+	 * One of the DRM_MODE_ENCODER_<foo> types in drm_mode.h. The following
+	 * encoder types are defined thus far:
+	 *
+	 * - DRM_MODE_ENCODER_DAC for VGA and analog on DVI-I/DVI-A.
+	 *
+	 * - DRM_MODE_ENCODER_TMDS for DVI, HDMI and (embedded) DisplayPort.
+	 *
+	 * - DRM_MODE_ENCODER_LVDS for display panels, or in general any panel
+	 *   with a proprietary parallel connector.
+	 *
+	 * - DRM_MODE_ENCODER_TVDAC for TV output (Composite, S-Video,
+	 *   Component, SCART).
+	 *
+	 * - DRM_MODE_ENCODER_VIRTUAL for virtual machine displays
+	 *
+	 * - DRM_MODE_ENCODER_DSI for panels connected using the DSI serial bus.
+	 *
+	 * - DRM_MODE_ENCODER_DPI for panels connected using the DPI parallel
+	 *   bus.
+	 *
+	 * - DRM_MODE_ENCODER_DPMST for special fake encoders used to allow
+	 *   mutliple DP MST streams to share one physical encoder.
+	 */
+	int encoder_type;
+
+	/**
+	 * @index: Position inside the mode_config.list, can be used as an array
+	 * index. It is invariant over the lifetime of the encoder.
+	 */
+	unsigned index;
+
+	/**
+	 * @possible_crtcs: Bitmask of potential CRTC bindings, using
+	 * drm_crtc_index() as the index into the bitfield. The driver must set
+	 * the bits for all &drm_crtc objects this encoder can be connected to
+	 * before calling drm_dev_register().
+	 *
+	 * You will get a WARN if you get this wrong in the driver.
+	 *
+	 * Note that since CRTC objects can't be hotplugged the assigned indices
+	 * are stable and hence known before registering all objects.
+	 */
+	uint32_t possible_crtcs;
+
+	/**
+	 * @possible_clones: Bitmask of potential sibling encoders for cloning,
+	 * using drm_encoder_index() as the index into the bitfield. The driver
+	 * must set the bits for all &drm_encoder objects which can clone a
+	 * &drm_crtc together with this encoder before calling
+	 * drm_dev_register(). Drivers should set the bit representing the
+	 * encoder itself, too. Cloning bits should be set such that when two
+	 * encoders can be used in a cloned configuration, they both should have
+	 * each another bits set.
+	 *
+	 * As an exception to the above rule if the driver doesn't implement
+	 * any cloning it can leave @possible_clones set to 0. The core will
+	 * automagically fix this up by setting the bit for the encoder itself.
+	 *
+	 * You will get a WARN if you get this wrong in the driver.
+	 *
+	 * Note that since encoder objects can't be hotplugged the assigned indices
+	 * are stable and hence known before registering all objects.
+	 */
+	uint32_t possible_clones;
+
+	/**
+	 * @crtc: Currently bound CRTC, only really meaningful for non-atomic
+	 * drivers.  Atomic drivers should instead check
+	 * &drm_connector_state.crtc.
+	 */
+	struct drm_crtc *crtc;
+
+	/**
+	 * @bridge_chain: Bridges attached to this encoder. Drivers shall not
+	 * access this field directly.
+	 */
+	struct list_head bridge_chain;
+
+	const struct drm_encoder_funcs *funcs;
+	const struct drm_encoder_helper_funcs *helper_private;
+};
+
+#define obj_to_encoder(x) container_of(x, struct drm_encoder, base)
+
+__printf(5, 6)
+int drm_encoder_init(struct drm_device *dev,
+		     struct drm_encoder *encoder,
+		     const struct drm_encoder_funcs *funcs,
+		     int encoder_type, const char *name, ...);
+
+/**
+ * drm_encoder_index - find the index of a registered encoder
+ * @encoder: encoder to find index for
+ *
+ * Given a registered encoder, return the index of that encoder within a DRM
+ * device's list of encoders.
+ */
+static inline unsigned int drm_encoder_index(const struct drm_encoder *encoder)
+{
+	return encoder->index;
+}
+
+/**
+ * drm_encoder_mask - find the mask of a registered encoder
+ * @encoder: encoder to find mask for
+ *
+ * Given a registered encoder, return the mask bit of that encoder for an
+ * encoder's possible_clones field.
+ */
+static inline u32 drm_encoder_mask(const struct drm_encoder *encoder)
+{
+	return 1 << drm_encoder_index(encoder);
+}
+
+/**
+ * drm_encoder_crtc_ok - can a given crtc drive a given encoder?
+ * @encoder: encoder to test
+ * @crtc: crtc to test
+ *
+ * Returns false if @encoder can't be driven by @crtc, true otherwise.
+ */
+static inline bool drm_encoder_crtc_ok(struct drm_encoder *encoder,
+				       struct drm_crtc *crtc)
+{
+	return !!(encoder->possible_crtcs & drm_crtc_mask(crtc));
+}
+
+/**
+ * drm_encoder_find - find a &drm_encoder
+ * @dev: DRM device
+ * @file_priv: drm file to check for lease against.
+ * @id: encoder id
+ *
+ * Returns the encoder with @id, NULL if it doesn't exist. Simple wrapper around
+ * drm_mode_object_find().
+ */
+static inline struct drm_encoder *drm_encoder_find(struct drm_device *dev,
+						   struct drm_file *file_priv,
+						   uint32_t id)
+{
+	struct drm_mode_object *mo;
+
+	mo = drm_mode_object_find(dev, file_priv, id, DRM_MODE_OBJECT_ENCODER);
+
+	return mo ? obj_to_encoder(mo) : NULL;
+}
+
+void drm_encoder_cleanup(struct drm_encoder *encoder);
+
+/**
+ * drm_for_each_encoder_mask - iterate over encoders specified by bitmask
+ * @encoder: the loop cursor
+ * @dev: the DRM device
+ * @encoder_mask: bitmask of encoder indices
+ *
+ * Iterate over all encoders specified by bitmask.
+ */
+#define drm_for_each_encoder_mask(encoder, dev, encoder_mask) \
+	list_for_each_entry((encoder), &(dev)->mode_config.encoder_list, head) \
+		for_each_if ((encoder_mask) & drm_encoder_mask(encoder))
+
+/**
+ * drm_for_each_encoder - iterate over all encoders
+ * @encoder: the loop cursor
+ * @dev: the DRM device
+ *
+ * Iterate over all encoders of @dev.
+ */
+#define drm_for_each_encoder(encoder, dev) \
+	list_for_each_entry(encoder, &(dev)->mode_config.encoder_list, head)
+
+#endif