diff options
Diffstat (limited to 'kernel/dma/contiguous.c')
| -rw-r--r-- | kernel/dma/contiguous.c | 444 |
1 files changed, 444 insertions, 0 deletions
diff --git a/kernel/dma/contiguous.c b/kernel/dma/contiguous.c new file mode 100644 index 000000000..16b95ff12 --- /dev/null +++ b/kernel/dma/contiguous.c @@ -0,0 +1,444 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Contiguous Memory Allocator for DMA mapping framework + * Copyright (c) 2010-2011 by Samsung Electronics. + * Written by: + * Marek Szyprowski <m.szyprowski@samsung.com> + * Michal Nazarewicz <mina86@mina86.com> + * + * Contiguous Memory Allocator + * + * The Contiguous Memory Allocator (CMA) makes it possible to + * allocate big contiguous chunks of memory after the system has + * booted. + * + * Why is it needed? + * + * Various devices on embedded systems have no scatter-getter and/or + * IO map support and require contiguous blocks of memory to + * operate. They include devices such as cameras, hardware video + * coders, etc. + * + * Such devices often require big memory buffers (a full HD frame + * is, for instance, more then 2 mega pixels large, i.e. more than 6 + * MB of memory), which makes mechanisms such as kmalloc() or + * alloc_page() ineffective. + * + * At the same time, a solution where a big memory region is + * reserved for a device is suboptimal since often more memory is + * reserved then strictly required and, moreover, the memory is + * inaccessible to page system even if device drivers don't use it. + * + * CMA tries to solve this issue by operating on memory regions + * where only movable pages can be allocated from. This way, kernel + * can use the memory for pagecache and when device driver requests + * it, allocated pages can be migrated. + */ + +#define pr_fmt(fmt) "cma: " fmt + +#ifdef CONFIG_CMA_DEBUG +#ifndef DEBUG +# define DEBUG +#endif +#endif + +#include <asm/page.h> + +#include <linux/memblock.h> +#include <linux/err.h> +#include <linux/sizes.h> +#include <linux/dma-map-ops.h> +#include <linux/cma.h> + +#ifdef CONFIG_CMA_SIZE_MBYTES +#define CMA_SIZE_MBYTES CONFIG_CMA_SIZE_MBYTES +#else +#define CMA_SIZE_MBYTES 0 +#endif + +struct cma *dma_contiguous_default_area; + +/* + * Default global CMA area size can be defined in kernel's .config. + * This is useful mainly for distro maintainers to create a kernel + * that works correctly for most supported systems. + * The size can be set in bytes or as a percentage of the total memory + * in the system. + * + * Users, who want to set the size of global CMA area for their system + * should use cma= kernel parameter. + */ +static const phys_addr_t size_bytes __initconst = + (phys_addr_t)CMA_SIZE_MBYTES * SZ_1M; +static phys_addr_t size_cmdline __initdata = -1; +static phys_addr_t base_cmdline __initdata; +static phys_addr_t limit_cmdline __initdata; + +static int __init early_cma(char *p) +{ + if (!p) { + pr_err("Config string not provided\n"); + return -EINVAL; + } + + size_cmdline = memparse(p, &p); + if (*p != '@') + return 0; + base_cmdline = memparse(p + 1, &p); + if (*p != '-') { + limit_cmdline = base_cmdline + size_cmdline; + return 0; + } + limit_cmdline = memparse(p + 1, &p); + + return 0; +} +early_param("cma", early_cma); + +#ifdef CONFIG_DMA_PERNUMA_CMA + +static struct cma *dma_contiguous_pernuma_area[MAX_NUMNODES]; +static phys_addr_t pernuma_size_bytes __initdata; + +static int __init early_cma_pernuma(char *p) +{ + pernuma_size_bytes = memparse(p, &p); + return 0; +} +early_param("cma_pernuma", early_cma_pernuma); +#endif + +#ifdef CONFIG_CMA_SIZE_PERCENTAGE + +static phys_addr_t __init __maybe_unused cma_early_percent_memory(void) +{ + unsigned long total_pages = PHYS_PFN(memblock_phys_mem_size()); + + return (total_pages * CONFIG_CMA_SIZE_PERCENTAGE / 100) << PAGE_SHIFT; +} + +#else + +static inline __maybe_unused phys_addr_t cma_early_percent_memory(void) +{ + return 0; +} + +#endif + +#ifdef CONFIG_DMA_PERNUMA_CMA +void __init dma_pernuma_cma_reserve(void) +{ + int nid; + + if (!pernuma_size_bytes) + return; + + for_each_online_node(nid) { + int ret; + char name[CMA_MAX_NAME]; + struct cma **cma = &dma_contiguous_pernuma_area[nid]; + + snprintf(name, sizeof(name), "pernuma%d", nid); + ret = cma_declare_contiguous_nid(0, pernuma_size_bytes, 0, 0, + 0, false, name, cma, nid); + if (ret) { + pr_warn("%s: reservation failed: err %d, node %d", __func__, + ret, nid); + continue; + } + + pr_debug("%s: reserved %llu MiB on node %d\n", __func__, + (unsigned long long)pernuma_size_bytes / SZ_1M, nid); + } +} +#endif + +/** + * dma_contiguous_reserve() - reserve area(s) for contiguous memory handling + * @limit: End address of the reserved memory (optional, 0 for any). + * + * This function reserves memory from early allocator. It should be + * called by arch specific code once the early allocator (memblock or bootmem) + * has been activated and all other subsystems have already allocated/reserved + * memory. + */ +void __init dma_contiguous_reserve(phys_addr_t limit) +{ + phys_addr_t selected_size = 0; + phys_addr_t selected_base = 0; + phys_addr_t selected_limit = limit; + bool fixed = false; + + pr_debug("%s(limit %08lx)\n", __func__, (unsigned long)limit); + + if (size_cmdline != -1) { + selected_size = size_cmdline; + selected_base = base_cmdline; + selected_limit = min_not_zero(limit_cmdline, limit); + if (base_cmdline + size_cmdline == limit_cmdline) + fixed = true; + } else { +#ifdef CONFIG_CMA_SIZE_SEL_MBYTES + selected_size = size_bytes; +#elif defined(CONFIG_CMA_SIZE_SEL_PERCENTAGE) + selected_size = cma_early_percent_memory(); +#elif defined(CONFIG_CMA_SIZE_SEL_MIN) + selected_size = min(size_bytes, cma_early_percent_memory()); +#elif defined(CONFIG_CMA_SIZE_SEL_MAX) + selected_size = max(size_bytes, cma_early_percent_memory()); +#endif + } + + if (selected_size && !dma_contiguous_default_area) { + pr_debug("%s: reserving %ld MiB for global area\n", __func__, + (unsigned long)selected_size / SZ_1M); + + dma_contiguous_reserve_area(selected_size, selected_base, + selected_limit, + &dma_contiguous_default_area, + fixed); + } +} + +void __weak +dma_contiguous_early_fixup(phys_addr_t base, unsigned long size) +{ +} + +/** + * dma_contiguous_reserve_area() - reserve custom contiguous area + * @size: Size of the reserved area (in bytes), + * @base: Base address of the reserved area optional, use 0 for any + * @limit: End address of the reserved memory (optional, 0 for any). + * @res_cma: Pointer to store the created cma region. + * @fixed: hint about where to place the reserved area + * + * This function reserves memory from early allocator. It should be + * called by arch specific code once the early allocator (memblock or bootmem) + * has been activated and all other subsystems have already allocated/reserved + * memory. This function allows to create custom reserved areas for specific + * devices. + * + * If @fixed is true, reserve contiguous area at exactly @base. If false, + * reserve in range from @base to @limit. + */ +int __init dma_contiguous_reserve_area(phys_addr_t size, phys_addr_t base, + phys_addr_t limit, struct cma **res_cma, + bool fixed) +{ + int ret; + + ret = cma_declare_contiguous(base, size, limit, 0, 0, fixed, + "reserved", res_cma); + if (ret) + return ret; + + /* Architecture specific contiguous memory fixup. */ + dma_contiguous_early_fixup(cma_get_base(*res_cma), + cma_get_size(*res_cma)); + + return 0; +} + +/** + * dma_alloc_from_contiguous() - allocate pages from contiguous area + * @dev: Pointer to device for which the allocation is performed. + * @count: Requested number of pages. + * @align: Requested alignment of pages (in PAGE_SIZE order). + * @no_warn: Avoid printing message about failed allocation. + * + * This function allocates memory buffer for specified device. It uses + * device specific contiguous memory area if available or the default + * global one. Requires architecture specific dev_get_cma_area() helper + * function. + */ +struct page *dma_alloc_from_contiguous(struct device *dev, size_t count, + unsigned int align, bool no_warn) +{ + if (align > CONFIG_CMA_ALIGNMENT) + align = CONFIG_CMA_ALIGNMENT; + + return cma_alloc(dev_get_cma_area(dev), count, align, no_warn); +} + +/** + * dma_release_from_contiguous() - release allocated pages + * @dev: Pointer to device for which the pages were allocated. + * @pages: Allocated pages. + * @count: Number of allocated pages. + * + * This function releases memory allocated by dma_alloc_from_contiguous(). + * It returns false when provided pages do not belong to contiguous area and + * true otherwise. + */ +bool dma_release_from_contiguous(struct device *dev, struct page *pages, + int count) +{ + return cma_release(dev_get_cma_area(dev), pages, count); +} + +static struct page *cma_alloc_aligned(struct cma *cma, size_t size, gfp_t gfp) +{ + unsigned int align = min(get_order(size), CONFIG_CMA_ALIGNMENT); + + return cma_alloc(cma, size >> PAGE_SHIFT, align, gfp & __GFP_NOWARN); +} + +/** + * dma_alloc_contiguous() - allocate contiguous pages + * @dev: Pointer to device for which the allocation is performed. + * @size: Requested allocation size. + * @gfp: Allocation flags. + * + * tries to use device specific contiguous memory area if available, or it + * tries to use per-numa cma, if the allocation fails, it will fallback to + * try default global one. + * + * Note that it bypass one-page size of allocations from the per-numa and + * global area as the addresses within one page are always contiguous, so + * there is no need to waste CMA pages for that kind; it also helps reduce + * fragmentations. + */ +struct page *dma_alloc_contiguous(struct device *dev, size_t size, gfp_t gfp) +{ +#ifdef CONFIG_DMA_PERNUMA_CMA + int nid = dev_to_node(dev); +#endif + + /* CMA can be used only in the context which permits sleeping */ + if (!gfpflags_allow_blocking(gfp)) + return NULL; + if (dev->cma_area) + return cma_alloc_aligned(dev->cma_area, size, gfp); + if (size <= PAGE_SIZE) + return NULL; + +#ifdef CONFIG_DMA_PERNUMA_CMA + if (nid != NUMA_NO_NODE && !(gfp & (GFP_DMA | GFP_DMA32))) { + struct cma *cma = dma_contiguous_pernuma_area[nid]; + struct page *page; + + if (cma) { + page = cma_alloc_aligned(cma, size, gfp); + if (page) + return page; + } + } +#endif + if (!dma_contiguous_default_area) + return NULL; + + return cma_alloc_aligned(dma_contiguous_default_area, size, gfp); +} + +/** + * dma_free_contiguous() - release allocated pages + * @dev: Pointer to device for which the pages were allocated. + * @page: Pointer to the allocated pages. + * @size: Size of allocated pages. + * + * This function releases memory allocated by dma_alloc_contiguous(). As the + * cma_release returns false when provided pages do not belong to contiguous + * area and true otherwise, this function then does a fallback __free_pages() + * upon a false-return. + */ +void dma_free_contiguous(struct device *dev, struct page *page, size_t size) +{ + unsigned int count = PAGE_ALIGN(size) >> PAGE_SHIFT; + + /* if dev has its own cma, free page from there */ + if (dev->cma_area) { + if (cma_release(dev->cma_area, page, count)) + return; + } else { + /* + * otherwise, page is from either per-numa cma or default cma + */ +#ifdef CONFIG_DMA_PERNUMA_CMA + if (cma_release(dma_contiguous_pernuma_area[page_to_nid(page)], + page, count)) + return; +#endif + if (cma_release(dma_contiguous_default_area, page, count)) + return; + } + + /* not in any cma, free from buddy */ + __free_pages(page, get_order(size)); +} + +/* + * Support for reserved memory regions defined in device tree + */ +#ifdef CONFIG_OF_RESERVED_MEM +#include <linux/of.h> +#include <linux/of_fdt.h> +#include <linux/of_reserved_mem.h> + +#undef pr_fmt +#define pr_fmt(fmt) fmt + +static int rmem_cma_device_init(struct reserved_mem *rmem, struct device *dev) +{ + dev->cma_area = rmem->priv; + return 0; +} + +static void rmem_cma_device_release(struct reserved_mem *rmem, + struct device *dev) +{ + dev->cma_area = NULL; +} + +static const struct reserved_mem_ops rmem_cma_ops = { + .device_init = rmem_cma_device_init, + .device_release = rmem_cma_device_release, +}; + +static int __init rmem_cma_setup(struct reserved_mem *rmem) +{ + phys_addr_t align = PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order); + phys_addr_t mask = align - 1; + unsigned long node = rmem->fdt_node; + bool default_cma = of_get_flat_dt_prop(node, "linux,cma-default", NULL); + struct cma *cma; + int err; + + if (size_cmdline != -1 && default_cma) { + pr_info("Reserved memory: bypass %s node, using cmdline CMA params instead\n", + rmem->name); + return -EBUSY; + } + + if (!of_get_flat_dt_prop(node, "reusable", NULL) || + of_get_flat_dt_prop(node, "no-map", NULL)) + return -EINVAL; + + if ((rmem->base & mask) || (rmem->size & mask)) { + pr_err("Reserved memory: incorrect alignment of CMA region\n"); + return -EINVAL; + } + + err = cma_init_reserved_mem(rmem->base, rmem->size, 0, rmem->name, &cma); + if (err) { + pr_err("Reserved memory: unable to setup CMA region\n"); + return err; + } + /* Architecture specific contiguous memory fixup. */ + dma_contiguous_early_fixup(rmem->base, rmem->size); + + if (default_cma) + dma_contiguous_default_area = cma; + + rmem->ops = &rmem_cma_ops; + rmem->priv = cma; + + pr_info("Reserved memory: created CMA memory pool at %pa, size %ld MiB\n", + &rmem->base, (unsigned long)rmem->size / SZ_1M); + + return 0; +} +RESERVEDMEM_OF_DECLARE(cma, "shared-dma-pool", rmem_cma_setup); +#endif |