diff options
Diffstat (limited to '')
| -rw-r--r-- | kernel/time/clocksource.c | 25 | ||||
| -rw-r--r-- | kernel/time/hrtimer.c | 17 | ||||
| -rw-r--r-- | kernel/time/tick-sched.c | 5 | ||||
| -rw-r--r-- | kernel/time/timekeeping.c | 24 | ||||
| -rw-r--r-- | kernel/time/timer.c | 164 |
5 files changed, 152 insertions, 83 deletions
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c index 86e0fbe58..754e93edb 100644 --- a/kernel/time/clocksource.c +++ b/kernel/time/clocksource.c @@ -118,6 +118,7 @@ static DECLARE_WORK(watchdog_work, clocksource_watchdog_work); static DEFINE_SPINLOCK(watchdog_lock); static int watchdog_running; static atomic_t watchdog_reset_pending; +static int64_t watchdog_max_interval; static inline void clocksource_watchdog_lock(unsigned long *flags) { @@ -136,6 +137,7 @@ static void __clocksource_change_rating(struct clocksource *cs, int rating); * Interval: 0.5sec. */ #define WATCHDOG_INTERVAL (HZ >> 1) +#define WATCHDOG_INTERVAL_MAX_NS ((2 * WATCHDOG_INTERVAL) * (NSEC_PER_SEC / HZ)) static void clocksource_watchdog_work(struct work_struct *work) { @@ -324,8 +326,8 @@ static inline void clocksource_reset_watchdog(void) static void clocksource_watchdog(struct timer_list *unused) { u64 csnow, wdnow, cslast, wdlast, delta; + int64_t wd_nsec, cs_nsec, interval; int next_cpu, reset_pending; - int64_t wd_nsec, cs_nsec; struct clocksource *cs; enum wd_read_status read_ret; unsigned long extra_wait = 0; @@ -395,6 +397,27 @@ static void clocksource_watchdog(struct timer_list *unused) if (atomic_read(&watchdog_reset_pending)) continue; + /* + * The processing of timer softirqs can get delayed (usually + * on account of ksoftirqd not getting to run in a timely + * manner), which causes the watchdog interval to stretch. + * Skew detection may fail for longer watchdog intervals + * on account of fixed margins being used. + * Some clocksources, e.g. acpi_pm, cannot tolerate + * watchdog intervals longer than a few seconds. + */ + interval = max(cs_nsec, wd_nsec); + if (unlikely(interval > WATCHDOG_INTERVAL_MAX_NS)) { + if (system_state > SYSTEM_SCHEDULING && + interval > 2 * watchdog_max_interval) { + watchdog_max_interval = interval; + pr_warn("Long readout interval, skipping watchdog check: cs_nsec: %lld wd_nsec: %lld\n", + cs_nsec, wd_nsec); + } + watchdog_timer.expires = jiffies; + continue; + } + /* Check the deviation from the watchdog clocksource. */ md = cs->uncertainty_margin + watchdog->uncertainty_margin; if (abs(cs_nsec - wd_nsec) > md) { diff --git a/kernel/time/hrtimer.c b/kernel/time/hrtimer.c index ede09dda3..2b2a6e292 100644 --- a/kernel/time/hrtimer.c +++ b/kernel/time/hrtimer.c @@ -980,6 +980,7 @@ static int enqueue_hrtimer(struct hrtimer *timer, enum hrtimer_mode mode) { debug_activate(timer, mode); + WARN_ON_ONCE(!base->cpu_base->online); base->cpu_base->active_bases |= 1 << base->index; @@ -2078,6 +2079,7 @@ int hrtimers_prepare_cpu(unsigned int cpu) cpu_base->softirq_next_timer = NULL; cpu_base->expires_next = KTIME_MAX; cpu_base->softirq_expires_next = KTIME_MAX; + cpu_base->online = 1; hrtimer_cpu_base_init_expiry_lock(cpu_base); return 0; } @@ -2145,6 +2147,7 @@ int hrtimers_cpu_dying(unsigned int dying_cpu) smp_call_function_single(ncpu, retrigger_next_event, NULL, 0); raw_spin_unlock(&new_base->lock); + old_base->online = 0; raw_spin_unlock(&old_base->lock); return 0; @@ -2161,7 +2164,7 @@ void __init hrtimers_init(void) /** * schedule_hrtimeout_range_clock - sleep until timeout * @expires: timeout value (ktime_t) - * @delta: slack in expires timeout (ktime_t) + * @delta: slack in expires timeout (ktime_t) for SCHED_OTHER tasks * @mode: timer mode * @clock_id: timer clock to be used */ @@ -2188,6 +2191,13 @@ schedule_hrtimeout_range_clock(ktime_t *expires, u64 delta, return -EINTR; } + /* + * Override any slack passed by the user if under + * rt contraints. + */ + if (rt_task(current)) + delta = 0; + hrtimer_init_sleeper_on_stack(&t, clock_id, mode); hrtimer_set_expires_range_ns(&t.timer, *expires, delta); hrtimer_sleeper_start_expires(&t, mode); @@ -2207,7 +2217,7 @@ EXPORT_SYMBOL_GPL(schedule_hrtimeout_range_clock); /** * schedule_hrtimeout_range - sleep until timeout * @expires: timeout value (ktime_t) - * @delta: slack in expires timeout (ktime_t) + * @delta: slack in expires timeout (ktime_t) for SCHED_OTHER tasks * @mode: timer mode * * Make the current task sleep until the given expiry time has @@ -2215,7 +2225,8 @@ EXPORT_SYMBOL_GPL(schedule_hrtimeout_range_clock); * the current task state has been set (see set_current_state()). * * The @delta argument gives the kernel the freedom to schedule the - * actual wakeup to a time that is both power and performance friendly. + * actual wakeup to a time that is both power and performance friendly + * for regular (non RT/DL) tasks. * The kernel give the normal best effort behavior for "@expires+@delta", * but may decide to fire the timer earlier, but no earlier than @expires. * diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index bc00ab011..d1693c269 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -1440,6 +1440,7 @@ void tick_cancel_sched_timer(int cpu) { struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu); ktime_t idle_sleeptime, iowait_sleeptime; + unsigned long idle_calls, idle_sleeps; # ifdef CONFIG_HIGH_RES_TIMERS if (ts->sched_timer.base) @@ -1448,9 +1449,13 @@ void tick_cancel_sched_timer(int cpu) idle_sleeptime = ts->idle_sleeptime; iowait_sleeptime = ts->iowait_sleeptime; + idle_calls = ts->idle_calls; + idle_sleeps = ts->idle_sleeps; memset(ts, 0, sizeof(*ts)); ts->idle_sleeptime = idle_sleeptime; ts->iowait_sleeptime = iowait_sleeptime; + ts->idle_calls = idle_calls; + ts->idle_sleeps = idle_sleeps; } #endif diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index d9b48f7a3..629a07e6a 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -1167,13 +1167,15 @@ static int adjust_historical_crosststamp(struct system_time_snapshot *history, } /* - * cycle_between - true if test occurs chronologically between before and after + * timestamp_in_interval - true if ts is chronologically in [start, end] + * + * True if ts occurs chronologically at or after start, and before or at end. */ -static bool cycle_between(u64 before, u64 test, u64 after) +static bool timestamp_in_interval(u64 start, u64 end, u64 ts) { - if (test > before && test < after) + if (ts >= start && ts <= end) return true; - if (test < before && before > after) + if (start > end && (ts >= start || ts <= end)) return true; return false; } @@ -1233,7 +1235,7 @@ int get_device_system_crosststamp(int (*get_time_fn) */ now = tk_clock_read(&tk->tkr_mono); interval_start = tk->tkr_mono.cycle_last; - if (!cycle_between(interval_start, cycles, now)) { + if (!timestamp_in_interval(interval_start, now, cycles)) { clock_was_set_seq = tk->clock_was_set_seq; cs_was_changed_seq = tk->cs_was_changed_seq; cycles = interval_start; @@ -1246,10 +1248,8 @@ int get_device_system_crosststamp(int (*get_time_fn) tk_core.timekeeper.offs_real); base_raw = tk->tkr_raw.base; - nsec_real = timekeeping_cycles_to_ns(&tk->tkr_mono, - system_counterval.cycles); - nsec_raw = timekeeping_cycles_to_ns(&tk->tkr_raw, - system_counterval.cycles); + nsec_real = timekeeping_cycles_to_ns(&tk->tkr_mono, cycles); + nsec_raw = timekeeping_cycles_to_ns(&tk->tkr_raw, cycles); } while (read_seqcount_retry(&tk_core.seq, seq)); xtstamp->sys_realtime = ktime_add_ns(base_real, nsec_real); @@ -1264,13 +1264,13 @@ int get_device_system_crosststamp(int (*get_time_fn) bool discontinuity; /* - * Check that the counter value occurs after the provided + * Check that the counter value is not before the provided * history reference and that the history doesn't cross a * clocksource change */ if (!history_begin || - !cycle_between(history_begin->cycles, - system_counterval.cycles, cycles) || + !timestamp_in_interval(history_begin->cycles, + cycles, system_counterval.cycles) || history_begin->cs_was_changed_seq != cs_was_changed_seq) return -EINVAL; partial_history_cycles = cycles - system_counterval.cycles; diff --git a/kernel/time/timer.c b/kernel/time/timer.c index e87e638c3..c135cefa4 100644 --- a/kernel/time/timer.c +++ b/kernel/time/timer.c @@ -1030,7 +1030,7 @@ __mod_timer(struct timer_list *timer, unsigned long expires, unsigned int option /* * We are trying to schedule the timer on the new base. * However we can't change timer's base while it is running, - * otherwise del_timer_sync() can't detect that the timer's + * otherwise timer_delete_sync() can't detect that the timer's * handler yet has not finished. This also guarantees that the * timer is serialized wrt itself. */ @@ -1068,14 +1068,16 @@ out_unlock: } /** - * mod_timer_pending - modify a pending timer's timeout - * @timer: the pending timer to be modified - * @expires: new timeout in jiffies + * mod_timer_pending - Modify a pending timer's timeout + * @timer: The pending timer to be modified + * @expires: New absolute timeout in jiffies * - * mod_timer_pending() is the same for pending timers as mod_timer(), - * but will not re-activate and modify already deleted timers. + * mod_timer_pending() is the same for pending timers as mod_timer(), but + * will not activate inactive timers. * - * It is useful for unserialized use of timers. + * Return: + * * %0 - The timer was inactive and not modified + * * %1 - The timer was active and requeued to expire at @expires */ int mod_timer_pending(struct timer_list *timer, unsigned long expires) { @@ -1084,24 +1086,27 @@ int mod_timer_pending(struct timer_list *timer, unsigned long expires) EXPORT_SYMBOL(mod_timer_pending); /** - * mod_timer - modify a timer's timeout - * @timer: the timer to be modified - * @expires: new timeout in jiffies - * - * mod_timer() is a more efficient way to update the expire field of an - * active timer (if the timer is inactive it will be activated) + * mod_timer - Modify a timer's timeout + * @timer: The timer to be modified + * @expires: New absolute timeout in jiffies * * mod_timer(timer, expires) is equivalent to: * * del_timer(timer); timer->expires = expires; add_timer(timer); * + * mod_timer() is more efficient than the above open coded sequence. In + * case that the timer is inactive, the del_timer() part is a NOP. The + * timer is in any case activated with the new expiry time @expires. + * * Note that if there are multiple unserialized concurrent users of the * same timer, then mod_timer() is the only safe way to modify the timeout, * since add_timer() cannot modify an already running timer. * - * The function returns whether it has modified a pending timer or not. - * (ie. mod_timer() of an inactive timer returns 0, mod_timer() of an - * active timer returns 1.) + * Return: + * * %0 - The timer was inactive and started + * * %1 - The timer was active and requeued to expire at @expires or + * the timer was active and not modified because @expires did + * not change the effective expiry time */ int mod_timer(struct timer_list *timer, unsigned long expires) { @@ -1112,11 +1117,18 @@ EXPORT_SYMBOL(mod_timer); /** * timer_reduce - Modify a timer's timeout if it would reduce the timeout * @timer: The timer to be modified - * @expires: New timeout in jiffies + * @expires: New absolute timeout in jiffies * * timer_reduce() is very similar to mod_timer(), except that it will only - * modify a running timer if that would reduce the expiration time (it will - * start a timer that isn't running). + * modify an enqueued timer if that would reduce the expiration time. If + * @timer is not enqueued it starts the timer. + * + * Return: + * * %0 - The timer was inactive and started + * * %1 - The timer was active and requeued to expire at @expires or + * the timer was active and not modified because @expires + * did not change the effective expiry time such that the + * timer would expire earlier than already scheduled */ int timer_reduce(struct timer_list *timer, unsigned long expires) { @@ -1125,18 +1137,21 @@ int timer_reduce(struct timer_list *timer, unsigned long expires) EXPORT_SYMBOL(timer_reduce); /** - * add_timer - start a timer - * @timer: the timer to be added + * add_timer - Start a timer + * @timer: The timer to be started * - * The kernel will do a ->function(@timer) callback from the - * timer interrupt at the ->expires point in the future. The - * current time is 'jiffies'. + * Start @timer to expire at @timer->expires in the future. @timer->expires + * is the absolute expiry time measured in 'jiffies'. When the timer expires + * timer->function(timer) will be invoked from soft interrupt context. * - * The timer's ->expires, ->function fields must be set prior calling this - * function. + * The @timer->expires and @timer->function fields must be set prior + * to calling this function. * - * Timers with an ->expires field in the past will be executed in the next - * timer tick. + * If @timer->expires is already in the past @timer will be queued to + * expire at the next timer tick. + * + * This can only operate on an inactive timer. Attempts to invoke this on + * an active timer are rejected with a warning. */ void add_timer(struct timer_list *timer) { @@ -1146,11 +1161,13 @@ void add_timer(struct timer_list *timer) EXPORT_SYMBOL(add_timer); /** - * add_timer_on - start a timer on a particular CPU - * @timer: the timer to be added - * @cpu: the CPU to start it on + * add_timer_on - Start a timer on a particular CPU + * @timer: The timer to be started + * @cpu: The CPU to start it on + * + * Same as add_timer() except that it starts the timer on the given CPU. * - * This is not very scalable on SMP. Double adds are not possible. + * See add_timer() for further details. */ void add_timer_on(struct timer_list *timer, int cpu) { @@ -1185,15 +1202,18 @@ void add_timer_on(struct timer_list *timer, int cpu) EXPORT_SYMBOL_GPL(add_timer_on); /** - * del_timer - deactivate a timer. - * @timer: the timer to be deactivated - * - * del_timer() deactivates a timer - this works on both active and inactive - * timers. - * - * The function returns whether it has deactivated a pending timer or not. - * (ie. del_timer() of an inactive timer returns 0, del_timer() of an - * active timer returns 1.) + * del_timer - Deactivate a timer. + * @timer: The timer to be deactivated + * + * The function only deactivates a pending timer, but contrary to + * timer_delete_sync() it does not take into account whether the timer's + * callback function is concurrently executed on a different CPU or not. + * It neither prevents rearming of the timer. If @timer can be rearmed + * concurrently then the return value of this function is meaningless. + * + * Return: + * * %0 - The timer was not pending + * * %1 - The timer was pending and deactivated */ int del_timer(struct timer_list *timer) { @@ -1215,10 +1235,19 @@ EXPORT_SYMBOL(del_timer); /** * try_to_del_timer_sync - Try to deactivate a timer - * @timer: timer to delete + * @timer: Timer to deactivate + * + * This function tries to deactivate a timer. On success the timer is not + * queued and the timer callback function is not running on any CPU. + * + * This function does not guarantee that the timer cannot be rearmed right + * after dropping the base lock. That needs to be prevented by the calling + * code if necessary. * - * This function tries to deactivate a timer. Upon successful (ret >= 0) - * exit the timer is not queued and the handler is not running on any CPU. + * Return: + * * %0 - The timer was not pending + * * %1 - The timer was pending and deactivated + * * %-1 - The timer callback function is running on a different CPU */ int try_to_del_timer_sync(struct timer_list *timer) { @@ -1312,25 +1341,20 @@ static inline void timer_sync_wait_running(struct timer_base *base) { } static inline void del_timer_wait_running(struct timer_list *timer) { } #endif -#if defined(CONFIG_SMP) || defined(CONFIG_PREEMPT_RT) /** - * del_timer_sync - deactivate a timer and wait for the handler to finish. - * @timer: the timer to be deactivated - * - * This function only differs from del_timer() on SMP: besides deactivating - * the timer it also makes sure the handler has finished executing on other - * CPUs. + * timer_delete_sync - Deactivate a timer and wait for the handler to finish. + * @timer: The timer to be deactivated * * Synchronization rules: Callers must prevent restarting of the timer, * otherwise this function is meaningless. It must not be called from * interrupt contexts unless the timer is an irqsafe one. The caller must - * not hold locks which would prevent completion of the timer's - * handler. The timer's handler must not call add_timer_on(). Upon exit the - * timer is not queued and the handler is not running on any CPU. + * not hold locks which would prevent completion of the timer's callback + * function. The timer's handler must not call add_timer_on(). Upon exit + * the timer is not queued and the handler is not running on any CPU. * - * Note: For !irqsafe timers, you must not hold locks that are held in - * interrupt context while calling this function. Even if the lock has - * nothing to do with the timer in question. Here's why:: + * For !irqsafe timers, the caller must not hold locks that are held in + * interrupt context. Even if the lock has nothing to do with the timer in + * question. Here's why:: * * CPU0 CPU1 * ---- ---- @@ -1340,16 +1364,23 @@ static inline void del_timer_wait_running(struct timer_list *timer) { } * spin_lock_irq(somelock); * <IRQ> * spin_lock(somelock); - * del_timer_sync(mytimer); + * timer_delete_sync(mytimer); * while (base->running_timer == mytimer); * - * Now del_timer_sync() will never return and never release somelock. - * The interrupt on the other CPU is waiting to grab somelock but - * it has interrupted the softirq that CPU0 is waiting to finish. + * Now timer_delete_sync() will never return and never release somelock. + * The interrupt on the other CPU is waiting to grab somelock but it has + * interrupted the softirq that CPU0 is waiting to finish. + * + * This function cannot guarantee that the timer is not rearmed again by + * some concurrent or preempting code, right after it dropped the base + * lock. If there is the possibility of a concurrent rearm then the return + * value of the function is meaningless. * - * The function returns whether it has deactivated a pending timer or not. + * Return: + * * %0 - The timer was not pending + * * %1 - The timer was pending and deactivated */ -int del_timer_sync(struct timer_list *timer) +int timer_delete_sync(struct timer_list *timer) { int ret; @@ -1382,8 +1413,7 @@ int del_timer_sync(struct timer_list *timer) return ret; } -EXPORT_SYMBOL(del_timer_sync); -#endif +EXPORT_SYMBOL(timer_delete_sync); static void call_timer_fn(struct timer_list *timer, void (*fn)(struct timer_list *), @@ -1405,8 +1435,8 @@ static void call_timer_fn(struct timer_list *timer, #endif /* * Couple the lock chain with the lock chain at - * del_timer_sync() by acquiring the lock_map around the fn() - * call here and in del_timer_sync(). + * timer_delete_sync() by acquiring the lock_map around the fn() + * call here and in timer_delete_sync(). */ lock_map_acquire(&lockdep_map); |