1 files changed, 195 insertions, 0 deletions
diff --git a/net/rxrpc/rtt.c b/net/rxrpc/rtt.c
new file mode 100644
index 000000000..be61d6f5b
--- /dev/null
+++ b/net/rxrpc/rtt.c
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0
+/* RTT/RTO calculation.
+ *
+ * Adapted from TCP for AF_RXRPC by David Howells (dhowells@redhat.com)
+ *
+ * https://tools.ietf.org/html/rfc6298
+ * https://tools.ietf.org/html/rfc1122#section-4.2.3.1
+ * http://ccr.sigcomm.org/archive/1995/jan95/ccr-9501-partridge87.pdf
+ */
+
+#include <linux/net.h>
+#include "ar-internal.h"
+
+#define RXRPC_RTO_MAX	((unsigned)(120 * HZ))
+#define RXRPC_TIMEOUT_INIT ((unsigned)(1*HZ))	/* RFC6298 2.1 initial RTO value	*/
+#define rxrpc_jiffies32 ((u32)jiffies)		/* As rxrpc_jiffies32 */
+
+static u32 rxrpc_rto_min_us(struct rxrpc_peer *peer)
+{
+	return 200;
+}
+
+static u32 __rxrpc_set_rto(const struct rxrpc_peer *peer)
+{
+	return usecs_to_jiffies((peer->srtt_us >> 3) + peer->rttvar_us);
+}
+
+static u32 rxrpc_bound_rto(u32 rto)
+{
+	return min(rto, RXRPC_RTO_MAX);
+}
+
+/*
+ * Called to compute a smoothed rtt estimate. The data fed to this
+ * routine either comes from timestamps, or from segments that were
+ * known _not_ to have been retransmitted [see Karn/Partridge
+ * Proceedings SIGCOMM 87]. The algorithm is from the SIGCOMM 88
+ * piece by Van Jacobson.
+ * NOTE: the next three routines used to be one big routine.
+ * To save cycles in the RFC 1323 implementation it was better to break
+ * it up into three procedures. -- erics
+ */
+static void rxrpc_rtt_estimator(struct rxrpc_peer *peer, long sample_rtt_us)
+{
+	long m = sample_rtt_us; /* RTT */
+	u32 srtt = peer->srtt_us;
+
+	/*	The following amusing code comes from Jacobson's
+	 *	article in SIGCOMM '88.  Note that rtt and mdev
+	 *	are scaled versions of rtt and mean deviation.
+	 *	This is designed to be as fast as possible
+	 *	m stands for "measurement".
+	 *
+	 *	On a 1990 paper the rto value is changed to:
+	 *	RTO = rtt + 4 * mdev
+	 *
+	 * Funny. This algorithm seems to be very broken.
+	 * These formulae increase RTO, when it should be decreased, increase
+	 * too slowly, when it should be increased quickly, decrease too quickly
+	 * etc. I guess in BSD RTO takes ONE value, so that it is absolutely
+	 * does not matter how to _calculate_ it. Seems, it was trap
+	 * that VJ failed to avoid. 8)
+	 */
+	if (srtt != 0) {
+		m -= (srtt >> 3);	/* m is now error in rtt est */
+		srtt += m;		/* rtt = 7/8 rtt + 1/8 new */
+		if (m < 0) {
+			m = -m;		/* m is now abs(error) */
+			m -= (peer->mdev_us >> 2);   /* similar update on mdev */
+			/* This is similar to one of Eifel findings.
+			 * Eifel blocks mdev updates when rtt decreases.
+			 * This solution is a bit different: we use finer gain
+			 * for mdev in this case (alpha*beta).
+			 * Like Eifel it also prevents growth of rto,
+			 * but also it limits too fast rto decreases,
+			 * happening in pure Eifel.
+			 */
+			if (m > 0)
+				m >>= 3;
+		} else {
+			m -= (peer->mdev_us >> 2);   /* similar update on mdev */
+		}
+
+		peer->mdev_us += m;		/* mdev = 3/4 mdev + 1/4 new */
+		if (peer->mdev_us > peer->mdev_max_us) {
+			peer->mdev_max_us = peer->mdev_us;
+			if (peer->mdev_max_us > peer->rttvar_us)
+				peer->rttvar_us = peer->mdev_max_us;
+		}
+	} else {
+		/* no previous measure. */
+		srtt = m << 3;		/* take the measured time to be rtt */
+		peer->mdev_us = m << 1;	/* make sure rto = 3*rtt */
+		peer->rttvar_us = max(peer->mdev_us, rxrpc_rto_min_us(peer));
+		peer->mdev_max_us = peer->rttvar_us;
+	}
+
+	peer->srtt_us = max(1U, srtt);
+}
+
+/*
+ * Calculate rto without backoff.  This is the second half of Van Jacobson's
+ * routine referred to above.
+ */
+static void rxrpc_set_rto(struct rxrpc_peer *peer)
+{
+	u32 rto;
+
+	/* 1. If rtt variance happened to be less 50msec, it is hallucination.
+	 *    It cannot be less due to utterly erratic ACK generation made
+	 *    at least by solaris and freebsd. "Erratic ACKs" has _nothing_
+	 *    to do with delayed acks, because at cwnd>2 true delack timeout
+	 *    is invisible. Actually, Linux-2.4 also generates erratic
+	 *    ACKs in some circumstances.
+	 */
+	rto = __rxrpc_set_rto(peer);
+
+	/* 2. Fixups made earlier cannot be right.
+	 *    If we do not estimate RTO correctly without them,
+	 *    all the algo is pure shit and should be replaced
+	 *    with correct one. It is exactly, which we pretend to do.
+	 */
+
+	/* NOTE: clamping at RXRPC_RTO_MIN is not required, current algo
+	 * guarantees that rto is higher.
+	 */
+	peer->rto_j = rxrpc_bound_rto(rto);
+}
+
+static void rxrpc_ack_update_rtt(struct rxrpc_peer *peer, long rtt_us)
+{
+	if (rtt_us < 0)
+		return;
+
+	//rxrpc_update_rtt_min(peer, rtt_us);
+	rxrpc_rtt_estimator(peer, rtt_us);
+	rxrpc_set_rto(peer);
+
+	/* RFC6298: only reset backoff on valid RTT measurement. */
+	peer->backoff = 0;
+}
+
+/*
+ * Add RTT information to cache.  This is called in softirq mode and has
+ * exclusive access to the peer RTT data.
+ */
+void rxrpc_peer_add_rtt(struct rxrpc_call *call, enum rxrpc_rtt_rx_trace why,
+			int rtt_slot,
+			rxrpc_serial_t send_serial, rxrpc_serial_t resp_serial,
+			ktime_t send_time, ktime_t resp_time)
+{
+	struct rxrpc_peer *peer = call->peer;
+	s64 rtt_us;
+
+	rtt_us = ktime_to_us(ktime_sub(resp_time, send_time));
+	if (rtt_us < 0)
+		return;
+
+	spin_lock(&peer->rtt_input_lock);
+	rxrpc_ack_update_rtt(peer, rtt_us);
+	if (peer->rtt_count < 3)
+		peer->rtt_count++;
+	spin_unlock(&peer->rtt_input_lock);
+
+	trace_rxrpc_rtt_rx(call, why, rtt_slot, send_serial, resp_serial,
+			   peer->srtt_us >> 3, peer->rto_j);
+}
+
+/*
+ * Get the retransmission timeout to set in jiffies, backing it off each time
+ * we retransmit.
+ */
+unsigned long rxrpc_get_rto_backoff(struct rxrpc_peer *peer, bool retrans)
+{
+	u64 timo_j;
+	u8 backoff = READ_ONCE(peer->backoff);
+
+	timo_j = peer->rto_j;
+	timo_j <<= backoff;
+	if (retrans && timo_j * 2 <= RXRPC_RTO_MAX)
+		WRITE_ONCE(peer->backoff, backoff + 1);
+
+	if (timo_j < 1)
+		timo_j = 1;
+
+	return timo_j;
+}
+
+void rxrpc_peer_init_rtt(struct rxrpc_peer *peer)
+{
+	peer->rto_j	= RXRPC_TIMEOUT_INIT;
+	peer->mdev_us	= jiffies_to_usecs(RXRPC_TIMEOUT_INIT);
+	peer->backoff	= 0;
+	//minmax_reset(&peer->rtt_min, rxrpc_jiffies32, ~0U);
+}