1 files changed, 429 insertions, 0 deletions
diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c
new file mode 100644
index 000000000..58274b4a1
--- /dev/null
+++ b/sound/arm/pxa2xx-ac97-lib.c
@@ -0,0 +1,429 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Based on sound/arm/pxa2xx-ac97.c and sound/soc/pxa/pxa2xx-ac97.c
+ * which contain:
+ *
+ * Author:	Nicolas Pitre
+ * Created:	Dec 02, 2004
+ * Copyright:	MontaVista Software Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+
+#include <sound/pxa2xx-lib.h>
+
+#include <mach/irqs.h>
+#include <mach/regs-ac97.h>
+#include <mach/audio.h>
+
+static DEFINE_MUTEX(car_mutex);
+static DECLARE_WAIT_QUEUE_HEAD(gsr_wq);
+static volatile long gsr_bits;
+static struct clk *ac97_clk;
+static struct clk *ac97conf_clk;
+static int reset_gpio;
+
+extern void pxa27x_configure_ac97reset(int reset_gpio, bool to_gpio);
+
+/*
+ * Beware PXA27x bugs:
+ *
+ *   o Slot 12 read from modem space will hang controller.
+ *   o CDONE, SDONE interrupt fails after any slot 12 IO.
+ *
+ * We therefore have an hybrid approach for waiting on SDONE (interrupt or
+ * 1 jiffy timeout if interrupt never comes).
+ */
+
+int pxa2xx_ac97_read(int slot, unsigned short reg)
+{
+	int val = -ENODEV;
+	volatile u32 *reg_addr;
+
+	if (slot > 0)
+		return -ENODEV;
+
+	mutex_lock(&car_mutex);
+
+	/* set up primary or secondary codec space */
+	if (cpu_is_pxa25x() && reg == AC97_GPIO_STATUS)
+		reg_addr = slot ? &SMC_REG_BASE : &PMC_REG_BASE;
+	else
+		reg_addr = slot ? &SAC_REG_BASE : &PAC_REG_BASE;
+	reg_addr += (reg >> 1);
+
+	/* start read access across the ac97 link */
+	GSR = GSR_CDONE | GSR_SDONE;
+	gsr_bits = 0;
+	val = (*reg_addr & 0xffff);
+	if (reg == AC97_GPIO_STATUS)
+		goto out;
+	if (wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_SDONE, 1) <= 0 &&
+	    !((GSR | gsr_bits) & GSR_SDONE)) {
+		printk(KERN_ERR "%s: read error (ac97_reg=%d GSR=%#lx)\n",
+				__func__, reg, GSR | gsr_bits);
+		val = -ETIMEDOUT;
+		goto out;
+	}
+
+	/* valid data now */
+	GSR = GSR_CDONE | GSR_SDONE;
+	gsr_bits = 0;
+	val = (*reg_addr & 0xffff);
+	/* but we've just started another cycle... */
+	wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_SDONE, 1);
+
+out:	mutex_unlock(&car_mutex);
+	return val;
+}
+EXPORT_SYMBOL_GPL(pxa2xx_ac97_read);
+
+int pxa2xx_ac97_write(int slot, unsigned short reg, unsigned short val)
+{
+	volatile u32 *reg_addr;
+	int ret = 0;
+
+	mutex_lock(&car_mutex);
+
+	/* set up primary or secondary codec space */
+	if (cpu_is_pxa25x() && reg == AC97_GPIO_STATUS)
+		reg_addr = slot ? &SMC_REG_BASE : &PMC_REG_BASE;
+	else
+		reg_addr = slot ? &SAC_REG_BASE : &PAC_REG_BASE;
+	reg_addr += (reg >> 1);
+
+	GSR = GSR_CDONE | GSR_SDONE;
+	gsr_bits = 0;
+	*reg_addr = val;
+	if (wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_CDONE, 1) <= 0 &&
+	    !((GSR | gsr_bits) & GSR_CDONE)) {
+		printk(KERN_ERR "%s: write error (ac97_reg=%d GSR=%#lx)\n",
+				__func__, reg, GSR | gsr_bits);
+		ret = -EIO;
+	}
+
+	mutex_unlock(&car_mutex);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pxa2xx_ac97_write);
+
+#ifdef CONFIG_PXA25x
+static inline void pxa_ac97_warm_pxa25x(void)
+{
+	gsr_bits = 0;
+
+	GCR |= GCR_WARM_RST;
+}
+
+static inline void pxa_ac97_cold_pxa25x(void)
+{
+	GCR &=  GCR_COLD_RST;  /* clear everything but nCRST */
+	GCR &= ~GCR_COLD_RST;  /* then assert nCRST */
+
+	gsr_bits = 0;
+
+	GCR = GCR_COLD_RST;
+}
+#endif
+
+#ifdef CONFIG_PXA27x
+static inline void pxa_ac97_warm_pxa27x(void)
+{
+	gsr_bits = 0;
+
+	/* warm reset broken on Bulverde, so manually keep AC97 reset high */
+	pxa27x_configure_ac97reset(reset_gpio, true);
+	udelay(10);
+	GCR |= GCR_WARM_RST;
+	pxa27x_configure_ac97reset(reset_gpio, false);
+	udelay(500);
+}
+
+static inline void pxa_ac97_cold_pxa27x(void)
+{
+	GCR &=  GCR_COLD_RST;  /* clear everything but nCRST */
+	GCR &= ~GCR_COLD_RST;  /* then assert nCRST */
+
+	gsr_bits = 0;
+
+	/* PXA27x Developers Manual section 13.5.2.2.1 */
+	clk_prepare_enable(ac97conf_clk);
+	udelay(5);
+	clk_disable_unprepare(ac97conf_clk);
+	GCR = GCR_COLD_RST | GCR_WARM_RST;
+}
+#endif
+
+#ifdef CONFIG_PXA3xx
+static inline void pxa_ac97_warm_pxa3xx(void)
+{
+	gsr_bits = 0;
+
+	/* Can't use interrupts */
+	GCR |= GCR_WARM_RST;
+}
+
+static inline void pxa_ac97_cold_pxa3xx(void)
+{
+	/* Hold CLKBPB for 100us */
+	GCR = 0;
+	GCR = GCR_CLKBPB;
+	udelay(100);
+	GCR = 0;
+
+	GCR &=  GCR_COLD_RST;  /* clear everything but nCRST */
+	GCR &= ~GCR_COLD_RST;  /* then assert nCRST */
+
+	gsr_bits = 0;
+
+	/* Can't use interrupts on PXA3xx */
+	GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN);
+
+	GCR = GCR_WARM_RST | GCR_COLD_RST;
+}
+#endif
+
+bool pxa2xx_ac97_try_warm_reset(void)
+{
+	unsigned long gsr;
+	unsigned int timeout = 100;
+
+#ifdef CONFIG_PXA25x
+	if (cpu_is_pxa25x())
+		pxa_ac97_warm_pxa25x();
+	else
+#endif
+#ifdef CONFIG_PXA27x
+	if (cpu_is_pxa27x())
+		pxa_ac97_warm_pxa27x();
+	else
+#endif
+#ifdef CONFIG_PXA3xx
+	if (cpu_is_pxa3xx())
+		pxa_ac97_warm_pxa3xx();
+	else
+#endif
+		snd_BUG();
+
+	while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--)
+		mdelay(1);
+
+	gsr = GSR | gsr_bits;
+	if (!(gsr & (GSR_PCR | GSR_SCR))) {
+		printk(KERN_INFO "%s: warm reset timeout (GSR=%#lx)\n",
+				 __func__, gsr);
+
+		return false;
+	}
+
+	return true;
+}
+EXPORT_SYMBOL_GPL(pxa2xx_ac97_try_warm_reset);
+
+bool pxa2xx_ac97_try_cold_reset(void)
+{
+	unsigned long gsr;
+	unsigned int timeout = 1000;
+
+#ifdef CONFIG_PXA25x
+	if (cpu_is_pxa25x())
+		pxa_ac97_cold_pxa25x();
+	else
+#endif
+#ifdef CONFIG_PXA27x
+	if (cpu_is_pxa27x())
+		pxa_ac97_cold_pxa27x();
+	else
+#endif
+#ifdef CONFIG_PXA3xx
+	if (cpu_is_pxa3xx())
+		pxa_ac97_cold_pxa3xx();
+	else
+#endif
+		snd_BUG();
+
+	while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--)
+		mdelay(1);
+
+	gsr = GSR | gsr_bits;
+	if (!(gsr & (GSR_PCR | GSR_SCR))) {
+		printk(KERN_INFO "%s: cold reset timeout (GSR=%#lx)\n",
+				 __func__, gsr);
+
+		return false;
+	}
+
+	return true;
+}
+EXPORT_SYMBOL_GPL(pxa2xx_ac97_try_cold_reset);
+
+
+void pxa2xx_ac97_finish_reset(void)
+{
+	GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN);
+	GCR |= GCR_SDONE_IE|GCR_CDONE_IE;
+}
+EXPORT_SYMBOL_GPL(pxa2xx_ac97_finish_reset);
+
+static irqreturn_t pxa2xx_ac97_irq(int irq, void *dev_id)
+{
+	long status;
+
+	status = GSR;
+	if (status) {
+		GSR = status;
+		gsr_bits |= status;
+		wake_up(&gsr_wq);
+
+		/* Although we don't use those we still need to clear them
+		   since they tend to spuriously trigger when MMC is used
+		   (hardware bug? go figure)... */
+		if (cpu_is_pxa27x()) {
+			MISR = MISR_EOC;
+			PISR = PISR_EOC;
+			MCSR = MCSR_EOC;
+		}
+
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
+#ifdef CONFIG_PM
+int pxa2xx_ac97_hw_suspend(void)
+{
+	GCR |= GCR_ACLINK_OFF;
+	clk_disable_unprepare(ac97_clk);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_suspend);
+
+int pxa2xx_ac97_hw_resume(void)
+{
+	clk_prepare_enable(ac97_clk);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_resume);
+#endif
+
+int pxa2xx_ac97_hw_probe(struct platform_device *dev)
+{
+	int ret;
+	pxa2xx_audio_ops_t *pdata = dev->dev.platform_data;
+
+	if (pdata) {
+		switch (pdata->reset_gpio) {
+		case 95:
+		case 113:
+			reset_gpio = pdata->reset_gpio;
+			break;
+		case 0:
+			reset_gpio = 113;
+			break;
+		case -1:
+			break;
+		default:
+			dev_err(&dev->dev, "Invalid reset GPIO %d\n",
+				pdata->reset_gpio);
+		}
+	} else if (!pdata && dev->dev.of_node) {
+		pdata = devm_kzalloc(&dev->dev, sizeof(*pdata), GFP_KERNEL);
+		if (!pdata)
+			return -ENOMEM;
+		pdata->reset_gpio = of_get_named_gpio(dev->dev.of_node,
+						      "reset-gpios", 0);
+		if (pdata->reset_gpio == -ENOENT)
+			pdata->reset_gpio = -1;
+		else if (pdata->reset_gpio < 0)
+			return pdata->reset_gpio;
+		reset_gpio = pdata->reset_gpio;
+	} else {
+		if (cpu_is_pxa27x())
+			reset_gpio = 113;
+	}
+
+	if (cpu_is_pxa27x()) {
+		/*
+		 * This gpio is needed for a work-around to a bug in the ac97
+		 * controller during warm reset.  The direction and level is set
+		 * here so that it is an output driven high when switching from
+		 * AC97_nRESET alt function to generic gpio.
+		 */
+		ret = gpio_request_one(reset_gpio, GPIOF_OUT_INIT_HIGH,
+				       "pxa27x ac97 reset");
+		if (ret < 0) {
+			pr_err("%s: gpio_request_one() failed: %d\n",
+			       __func__, ret);
+			goto err_conf;
+		}
+		pxa27x_configure_ac97reset(reset_gpio, false);
+
+		ac97conf_clk = clk_get(&dev->dev, "AC97CONFCLK");
+		if (IS_ERR(ac97conf_clk)) {
+			ret = PTR_ERR(ac97conf_clk);
+			ac97conf_clk = NULL;
+			goto err_conf;
+		}
+	}
+
+	ac97_clk = clk_get(&dev->dev, "AC97CLK");
+	if (IS_ERR(ac97_clk)) {
+		ret = PTR_ERR(ac97_clk);
+		ac97_clk = NULL;
+		goto err_clk;
+	}
+
+	ret = clk_prepare_enable(ac97_clk);
+	if (ret)
+		goto err_clk2;
+
+	ret = request_irq(IRQ_AC97, pxa2xx_ac97_irq, 0, "AC97", NULL);
+	if (ret < 0)
+		goto err_irq;
+
+	return 0;
+
+err_irq:
+	GCR |= GCR_ACLINK_OFF;
+err_clk2:
+	clk_put(ac97_clk);
+	ac97_clk = NULL;
+err_clk:
+	if (ac97conf_clk) {
+		clk_put(ac97conf_clk);
+		ac97conf_clk = NULL;
+	}
+err_conf:
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_probe);
+
+void pxa2xx_ac97_hw_remove(struct platform_device *dev)
+{
+	if (cpu_is_pxa27x())
+		gpio_free(reset_gpio);
+	GCR |= GCR_ACLINK_OFF;
+	free_irq(IRQ_AC97, NULL);
+	if (ac97conf_clk) {
+		clk_put(ac97conf_clk);
+		ac97conf_clk = NULL;
+	}
+	clk_disable_unprepare(ac97_clk);
+	clk_put(ac97_clk);
+	ac97_clk = NULL;
+}
+EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_remove);
+
+MODULE_AUTHOR("Nicolas Pitre");
+MODULE_DESCRIPTION("Intel/Marvell PXA sound library");
+MODULE_LICENSE("GPL");
+