diff options
Diffstat (limited to '')
| -rw-r--r-- | sound/soc/codecs/tlv320aic3x.c | 1939 |
1 files changed, 1939 insertions, 0 deletions
diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c new file mode 100644 index 000000000..6d066bc58 --- /dev/null +++ b/sound/soc/codecs/tlv320aic3x.c @@ -0,0 +1,1939 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * ALSA SoC TLV320AIC3X codec driver + * + * Author: Vladimir Barinov, <vbarinov@embeddedalley.com> + * Copyright: (C) 2007 MontaVista Software, Inc., <source@mvista.com> + * + * Based on sound/soc/codecs/wm8753.c by Liam Girdwood + * + * Notes: + * The AIC3X is a driver for a low power stereo audio + * codecs aic31, aic32, aic33, aic3007. + * + * It supports full aic33 codec functionality. + * The compatibility with aic32, aic31 and aic3007 is as follows: + * aic32/aic3007 | aic31 + * --------------------------------------- + * MONO_LOUT -> N/A | MONO_LOUT -> N/A + * | IN1L -> LINE1L + * | IN1R -> LINE1R + * | IN2L -> LINE2L + * | IN2R -> LINE2R + * | MIC3L/R -> N/A + * truncated internal functionality in + * accordance with documentation + * --------------------------------------- + * + * Hence the machine layer should disable unsupported inputs/outputs by + * snd_soc_dapm_disable_pin(codec, "MONO_LOUT"), etc. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/regulator/consumer.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/slab.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/initval.h> +#include <sound/tlv.h> +#include <sound/tlv320aic3x.h> + +#include "tlv320aic3x.h" + +#define AIC3X_NUM_SUPPLIES 4 +static const char *aic3x_supply_names[AIC3X_NUM_SUPPLIES] = { + "IOVDD", /* I/O Voltage */ + "DVDD", /* Digital Core Voltage */ + "AVDD", /* Analog DAC Voltage */ + "DRVDD", /* ADC Analog and Output Driver Voltage */ +}; + +static LIST_HEAD(reset_list); + +struct aic3x_priv; + +struct aic3x_disable_nb { + struct notifier_block nb; + struct aic3x_priv *aic3x; +}; + +/* codec private data */ +struct aic3x_priv { + struct snd_soc_component *component; + struct regmap *regmap; + struct regulator_bulk_data supplies[AIC3X_NUM_SUPPLIES]; + struct aic3x_disable_nb disable_nb[AIC3X_NUM_SUPPLIES]; + struct aic3x_setup_data *setup; + unsigned int sysclk; + unsigned int dai_fmt; + unsigned int tdm_delay; + unsigned int slot_width; + struct list_head list; + int master; + int gpio_reset; + int power; +#define AIC3X_MODEL_3X 0 +#define AIC3X_MODEL_33 1 +#define AIC3X_MODEL_3007 2 +#define AIC3X_MODEL_3104 3 + u16 model; + + /* Selects the micbias voltage */ + enum aic3x_micbias_voltage micbias_vg; + /* Output Common-Mode Voltage */ + u8 ocmv; +}; + +static const struct reg_default aic3x_reg[] = { + { 0, 0x00 }, { 1, 0x00 }, { 2, 0x00 }, { 3, 0x10 }, + { 4, 0x04 }, { 5, 0x00 }, { 6, 0x00 }, { 7, 0x00 }, + { 8, 0x00 }, { 9, 0x00 }, { 10, 0x00 }, { 11, 0x01 }, + { 12, 0x00 }, { 13, 0x00 }, { 14, 0x00 }, { 15, 0x80 }, + { 16, 0x80 }, { 17, 0xff }, { 18, 0xff }, { 19, 0x78 }, + { 20, 0x78 }, { 21, 0x78 }, { 22, 0x78 }, { 23, 0x78 }, + { 24, 0x78 }, { 25, 0x00 }, { 26, 0x00 }, { 27, 0xfe }, + { 28, 0x00 }, { 29, 0x00 }, { 30, 0xfe }, { 31, 0x00 }, + { 32, 0x18 }, { 33, 0x18 }, { 34, 0x00 }, { 35, 0x00 }, + { 36, 0x00 }, { 37, 0x00 }, { 38, 0x00 }, { 39, 0x00 }, + { 40, 0x00 }, { 41, 0x00 }, { 42, 0x00 }, { 43, 0x80 }, + { 44, 0x80 }, { 45, 0x00 }, { 46, 0x00 }, { 47, 0x00 }, + { 48, 0x00 }, { 49, 0x00 }, { 50, 0x00 }, { 51, 0x04 }, + { 52, 0x00 }, { 53, 0x00 }, { 54, 0x00 }, { 55, 0x00 }, + { 56, 0x00 }, { 57, 0x00 }, { 58, 0x04 }, { 59, 0x00 }, + { 60, 0x00 }, { 61, 0x00 }, { 62, 0x00 }, { 63, 0x00 }, + { 64, 0x00 }, { 65, 0x04 }, { 66, 0x00 }, { 67, 0x00 }, + { 68, 0x00 }, { 69, 0x00 }, { 70, 0x00 }, { 71, 0x00 }, + { 72, 0x04 }, { 73, 0x00 }, { 74, 0x00 }, { 75, 0x00 }, + { 76, 0x00 }, { 77, 0x00 }, { 78, 0x00 }, { 79, 0x00 }, + { 80, 0x00 }, { 81, 0x00 }, { 82, 0x00 }, { 83, 0x00 }, + { 84, 0x00 }, { 85, 0x00 }, { 86, 0x00 }, { 87, 0x00 }, + { 88, 0x00 }, { 89, 0x00 }, { 90, 0x00 }, { 91, 0x00 }, + { 92, 0x00 }, { 93, 0x00 }, { 94, 0x00 }, { 95, 0x00 }, + { 96, 0x00 }, { 97, 0x00 }, { 98, 0x00 }, { 99, 0x00 }, + { 100, 0x00 }, { 101, 0x00 }, { 102, 0x02 }, { 103, 0x00 }, + { 104, 0x00 }, { 105, 0x00 }, { 106, 0x00 }, { 107, 0x00 }, + { 108, 0x00 }, { 109, 0x00 }, +}; + +static bool aic3x_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case AIC3X_RESET: + return true; + default: + return false; + } +} + +static const struct regmap_config aic3x_regmap = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = DAC_ICC_ADJ, + .reg_defaults = aic3x_reg, + .num_reg_defaults = ARRAY_SIZE(aic3x_reg), + + .volatile_reg = aic3x_volatile_reg, + + .cache_type = REGCACHE_RBTREE, +}; + +#define SOC_DAPM_SINGLE_AIC3X(xname, reg, shift, mask, invert) \ + SOC_SINGLE_EXT(xname, reg, shift, mask, invert, \ + snd_soc_dapm_get_volsw, snd_soc_dapm_put_volsw_aic3x) + +/* + * All input lines are connected when !0xf and disconnected with 0xf bit field, + * so we have to use specific dapm_put call for input mixer + */ +static int snd_soc_dapm_put_volsw_aic3x(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = snd_soc_dapm_kcontrol_component(kcontrol); + struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + unsigned int reg = mc->reg; + unsigned int shift = mc->shift; + int max = mc->max; + unsigned int mask = (1 << fls(max)) - 1; + unsigned int invert = mc->invert; + unsigned short val; + struct snd_soc_dapm_update update = {}; + int connect, change; + + val = (ucontrol->value.integer.value[0] & mask); + + mask = 0xf; + if (val) + val = mask; + + connect = !!val; + + if (invert) + val = mask - val; + + mask <<= shift; + val <<= shift; + + change = snd_soc_component_test_bits(component, reg, mask, val); + if (change) { + update.kcontrol = kcontrol; + update.reg = reg; + update.mask = mask; + update.val = val; + + snd_soc_dapm_mixer_update_power(dapm, kcontrol, connect, + &update); + } + + return change; +} + +/* + * mic bias power on/off share the same register bits with + * output voltage of mic bias. when power on mic bias, we + * need reclaim it to voltage value. + * 0x0 = Powered off + * 0x1 = MICBIAS output is powered to 2.0V, + * 0x2 = MICBIAS output is powered to 2.5V + * 0x3 = MICBIAS output is connected to AVDD + */ +static int mic_bias_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); + struct aic3x_priv *aic3x = snd_soc_component_get_drvdata(component); + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + /* change mic bias voltage to user defined */ + snd_soc_component_update_bits(component, MICBIAS_CTRL, + MICBIAS_LEVEL_MASK, + aic3x->micbias_vg << MICBIAS_LEVEL_SHIFT); + break; + + case SND_SOC_DAPM_PRE_PMD: + snd_soc_component_update_bits(component, MICBIAS_CTRL, + MICBIAS_LEVEL_MASK, 0); + break; + } + return 0; +} + +static const char * const aic3x_left_dac_mux[] = { + "DAC_L1", "DAC_L3", "DAC_L2" }; +static SOC_ENUM_SINGLE_DECL(aic3x_left_dac_enum, DAC_LINE_MUX, 6, + aic3x_left_dac_mux); + +static const char * const aic3x_right_dac_mux[] = { + "DAC_R1", "DAC_R3", "DAC_R2" }; +static SOC_ENUM_SINGLE_DECL(aic3x_right_dac_enum, DAC_LINE_MUX, 4, + aic3x_right_dac_mux); + +static const char * const aic3x_left_hpcom_mux[] = { + "differential of HPLOUT", "constant VCM", "single-ended" }; +static SOC_ENUM_SINGLE_DECL(aic3x_left_hpcom_enum, HPLCOM_CFG, 4, + aic3x_left_hpcom_mux); + +static const char * const aic3x_right_hpcom_mux[] = { + "differential of HPROUT", "constant VCM", "single-ended", + "differential of HPLCOM", "external feedback" }; +static SOC_ENUM_SINGLE_DECL(aic3x_right_hpcom_enum, HPRCOM_CFG, 3, + aic3x_right_hpcom_mux); + +static const char * const aic3x_linein_mode_mux[] = { + "single-ended", "differential" }; +static SOC_ENUM_SINGLE_DECL(aic3x_line1l_2_l_enum, LINE1L_2_LADC_CTRL, 7, + aic3x_linein_mode_mux); +static SOC_ENUM_SINGLE_DECL(aic3x_line1l_2_r_enum, LINE1L_2_RADC_CTRL, 7, + aic3x_linein_mode_mux); +static SOC_ENUM_SINGLE_DECL(aic3x_line1r_2_l_enum, LINE1R_2_LADC_CTRL, 7, + aic3x_linein_mode_mux); +static SOC_ENUM_SINGLE_DECL(aic3x_line1r_2_r_enum, LINE1R_2_RADC_CTRL, 7, + aic3x_linein_mode_mux); +static SOC_ENUM_SINGLE_DECL(aic3x_line2l_2_ldac_enum, LINE2L_2_LADC_CTRL, 7, + aic3x_linein_mode_mux); +static SOC_ENUM_SINGLE_DECL(aic3x_line2r_2_rdac_enum, LINE2R_2_RADC_CTRL, 7, + aic3x_linein_mode_mux); + +static const char * const aic3x_adc_hpf[] = { + "Disabled", "0.0045xFs", "0.0125xFs", "0.025xFs" }; +static SOC_ENUM_DOUBLE_DECL(aic3x_adc_hpf_enum, AIC3X_CODEC_DFILT_CTRL, 6, 4, + aic3x_adc_hpf); + +static const char * const aic3x_agc_level[] = { + "-5.5dB", "-8dB", "-10dB", "-12dB", + "-14dB", "-17dB", "-20dB", "-24dB" }; +static SOC_ENUM_SINGLE_DECL(aic3x_lagc_level_enum, LAGC_CTRL_A, 4, + aic3x_agc_level); +static SOC_ENUM_SINGLE_DECL(aic3x_ragc_level_enum, RAGC_CTRL_A, 4, + aic3x_agc_level); + +static const char * const aic3x_agc_attack[] = { + "8ms", "11ms", "16ms", "20ms" }; +static SOC_ENUM_SINGLE_DECL(aic3x_lagc_attack_enum, LAGC_CTRL_A, 2, + aic3x_agc_attack); +static SOC_ENUM_SINGLE_DECL(aic3x_ragc_attack_enum, RAGC_CTRL_A, 2, + aic3x_agc_attack); + +static const char * const aic3x_agc_decay[] = { + "100ms", "200ms", "400ms", "500ms" }; +static SOC_ENUM_SINGLE_DECL(aic3x_lagc_decay_enum, LAGC_CTRL_A, 0, + aic3x_agc_decay); +static SOC_ENUM_SINGLE_DECL(aic3x_ragc_decay_enum, RAGC_CTRL_A, 0, + aic3x_agc_decay); + +static const char * const aic3x_poweron_time[] = { + "0us", "10us", "100us", "1ms", "10ms", "50ms", + "100ms", "200ms", "400ms", "800ms", "2s", "4s" }; +static SOC_ENUM_SINGLE_DECL(aic3x_poweron_time_enum, HPOUT_POP_REDUCTION, 4, + aic3x_poweron_time); + +static const char * const aic3x_rampup_step[] = { "0ms", "1ms", "2ms", "4ms" }; +static SOC_ENUM_SINGLE_DECL(aic3x_rampup_step_enum, HPOUT_POP_REDUCTION, 2, + aic3x_rampup_step); + +/* + * DAC digital volumes. From -63.5 to 0 dB in 0.5 dB steps + */ +static DECLARE_TLV_DB_SCALE(dac_tlv, -6350, 50, 0); +/* ADC PGA gain volumes. From 0 to 59.5 dB in 0.5 dB steps */ +static DECLARE_TLV_DB_SCALE(adc_tlv, 0, 50, 0); +/* + * Output stage volumes. From -78.3 to 0 dB. Muted below -78.3 dB. + * Step size is approximately 0.5 dB over most of the scale but increasing + * near the very low levels. + * Define dB scale so that it is mostly correct for range about -55 to 0 dB + * but having increasing dB difference below that (and where it doesn't count + * so much). This setting shows -50 dB (actual is -50.3 dB) for register + * value 100 and -58.5 dB (actual is -78.3 dB) for register value 117. + */ +static DECLARE_TLV_DB_SCALE(output_stage_tlv, -5900, 50, 1); + +/* Output volumes. From 0 to 9 dB in 1 dB steps */ +static const DECLARE_TLV_DB_SCALE(out_tlv, 0, 100, 0); + +static const struct snd_kcontrol_new aic3x_snd_controls[] = { + /* Output */ + SOC_DOUBLE_R_TLV("PCM Playback Volume", + LDAC_VOL, RDAC_VOL, 0, 0x7f, 1, dac_tlv), + + /* + * Output controls that map to output mixer switches. Note these are + * only for swapped L-to-R and R-to-L routes. See below stereo controls + * for direct L-to-L and R-to-R routes. + */ + SOC_SINGLE_TLV("Left Line Mixer PGAR Bypass Volume", + PGAR_2_LLOPM_VOL, 0, 118, 1, output_stage_tlv), + SOC_SINGLE_TLV("Left Line Mixer DACR1 Playback Volume", + DACR1_2_LLOPM_VOL, 0, 118, 1, output_stage_tlv), + + SOC_SINGLE_TLV("Right Line Mixer PGAL Bypass Volume", + PGAL_2_RLOPM_VOL, 0, 118, 1, output_stage_tlv), + SOC_SINGLE_TLV("Right Line Mixer DACL1 Playback Volume", + DACL1_2_RLOPM_VOL, 0, 118, 1, output_stage_tlv), + + SOC_SINGLE_TLV("Left HP Mixer PGAR Bypass Volume", + PGAR_2_HPLOUT_VOL, 0, 118, 1, output_stage_tlv), + SOC_SINGLE_TLV("Left HP Mixer DACR1 Playback Volume", + DACR1_2_HPLOUT_VOL, 0, 118, 1, output_stage_tlv), + + SOC_SINGLE_TLV("Right HP Mixer PGAL Bypass Volume", + PGAL_2_HPROUT_VOL, 0, 118, 1, output_stage_tlv), + SOC_SINGLE_TLV("Right HP Mixer DACL1 Playback Volume", + DACL1_2_HPROUT_VOL, 0, 118, 1, output_stage_tlv), + + SOC_SINGLE_TLV("Left HPCOM Mixer PGAR Bypass Volume", + PGAR_2_HPLCOM_VOL, 0, 118, 1, output_stage_tlv), + SOC_SINGLE_TLV("Left HPCOM Mixer DACR1 Playback Volume", + DACR1_2_HPLCOM_VOL, 0, 118, 1, output_stage_tlv), + + SOC_SINGLE_TLV("Right HPCOM Mixer PGAL Bypass Volume", + PGAL_2_HPRCOM_VOL, 0, 118, 1, output_stage_tlv), + SOC_SINGLE_TLV("Right HPCOM Mixer DACL1 Playback Volume", + DACL1_2_HPRCOM_VOL, 0, 118, 1, output_stage_tlv), + + /* Stereo output controls for direct L-to-L and R-to-R routes */ + SOC_DOUBLE_R_TLV("Line PGA Bypass Volume", + PGAL_2_LLOPM_VOL, PGAR_2_RLOPM_VOL, + 0, 118, 1, output_stage_tlv), + SOC_DOUBLE_R_TLV("Line DAC Playback Volume", + DACL1_2_LLOPM_VOL, DACR1_2_RLOPM_VOL, + 0, 118, 1, output_stage_tlv), + + SOC_DOUBLE_R_TLV("HP PGA Bypass Volume", + PGAL_2_HPLOUT_VOL, PGAR_2_HPROUT_VOL, + 0, 118, 1, output_stage_tlv), + SOC_DOUBLE_R_TLV("HP DAC Playback Volume", + DACL1_2_HPLOUT_VOL, DACR1_2_HPROUT_VOL, + 0, 118, 1, output_stage_tlv), + + SOC_DOUBLE_R_TLV("HPCOM PGA Bypass Volume", + PGAL_2_HPLCOM_VOL, PGAR_2_HPRCOM_VOL, + 0, 118, 1, output_stage_tlv), + SOC_DOUBLE_R_TLV("HPCOM DAC Playback Volume", + DACL1_2_HPLCOM_VOL, DACR1_2_HPRCOM_VOL, + 0, 118, 1, output_stage_tlv), + + /* Output pin controls */ + SOC_DOUBLE_R_TLV("Line Playback Volume", LLOPM_CTRL, RLOPM_CTRL, 4, + 9, 0, out_tlv), + SOC_DOUBLE_R("Line Playback Switch", LLOPM_CTRL, RLOPM_CTRL, 3, + 0x01, 0), + SOC_DOUBLE_R_TLV("HP Playback Volume", HPLOUT_CTRL, HPROUT_CTRL, 4, + 9, 0, out_tlv), + SOC_DOUBLE_R("HP Playback Switch", HPLOUT_CTRL, HPROUT_CTRL, 3, + 0x01, 0), + SOC_DOUBLE_R_TLV("HPCOM Playback Volume", HPLCOM_CTRL, HPRCOM_CTRL, + 4, 9, 0, out_tlv), + SOC_DOUBLE_R("HPCOM Playback Switch", HPLCOM_CTRL, HPRCOM_CTRL, 3, + 0x01, 0), + + /* + * Note: enable Automatic input Gain Controller with care. It can + * adjust PGA to max value when ADC is on and will never go back. + */ + SOC_DOUBLE_R("AGC Switch", LAGC_CTRL_A, RAGC_CTRL_A, 7, 0x01, 0), + SOC_ENUM("Left AGC Target level", aic3x_lagc_level_enum), + SOC_ENUM("Right AGC Target level", aic3x_ragc_level_enum), + SOC_ENUM("Left AGC Attack time", aic3x_lagc_attack_enum), + SOC_ENUM("Right AGC Attack time", aic3x_ragc_attack_enum), + SOC_ENUM("Left AGC Decay time", aic3x_lagc_decay_enum), + SOC_ENUM("Right AGC Decay time", aic3x_ragc_decay_enum), + + /* De-emphasis */ + SOC_DOUBLE("De-emphasis Switch", AIC3X_CODEC_DFILT_CTRL, 2, 0, 0x01, 0), + + /* Input */ + SOC_DOUBLE_R_TLV("PGA Capture Volume", LADC_VOL, RADC_VOL, + 0, 119, 0, adc_tlv), + SOC_DOUBLE_R("PGA Capture Switch", LADC_VOL, RADC_VOL, 7, 0x01, 1), + + SOC_ENUM("ADC HPF Cut-off", aic3x_adc_hpf_enum), + + /* Pop reduction */ + SOC_ENUM("Output Driver Power-On time", aic3x_poweron_time_enum), + SOC_ENUM("Output Driver Ramp-up step", aic3x_rampup_step_enum), +}; + +/* For other than tlv320aic3104 */ +static const struct snd_kcontrol_new aic3x_extra_snd_controls[] = { + /* + * Output controls that map to output mixer switches. Note these are + * only for swapped L-to-R and R-to-L routes. See below stereo controls + * for direct L-to-L and R-to-R routes. + */ + SOC_SINGLE_TLV("Left Line Mixer Line2R Bypass Volume", + LINE2R_2_LLOPM_VOL, 0, 118, 1, output_stage_tlv), + + SOC_SINGLE_TLV("Right Line Mixer Line2L Bypass Volume", + LINE2L_2_RLOPM_VOL, 0, 118, 1, output_stage_tlv), + + SOC_SINGLE_TLV("Left HP Mixer Line2R Bypass Volume", + LINE2R_2_HPLOUT_VOL, 0, 118, 1, output_stage_tlv), + + SOC_SINGLE_TLV("Right HP Mixer Line2L Bypass Volume", + LINE2L_2_HPROUT_VOL, 0, 118, 1, output_stage_tlv), + + SOC_SINGLE_TLV("Left HPCOM Mixer Line2R Bypass Volume", + LINE2R_2_HPLCOM_VOL, 0, 118, 1, output_stage_tlv), + + SOC_SINGLE_TLV("Right HPCOM Mixer Line2L Bypass Volume", + LINE2L_2_HPRCOM_VOL, 0, 118, 1, output_stage_tlv), + + /* Stereo output controls for direct L-to-L and R-to-R routes */ + SOC_DOUBLE_R_TLV("Line Line2 Bypass Volume", + LINE2L_2_LLOPM_VOL, LINE2R_2_RLOPM_VOL, + 0, 118, 1, output_stage_tlv), + + SOC_DOUBLE_R_TLV("HP Line2 Bypass Volume", + LINE2L_2_HPLOUT_VOL, LINE2R_2_HPROUT_VOL, + 0, 118, 1, output_stage_tlv), + + SOC_DOUBLE_R_TLV("HPCOM Line2 Bypass Volume", + LINE2L_2_HPLCOM_VOL, LINE2R_2_HPRCOM_VOL, + 0, 118, 1, output_stage_tlv), +}; + +static const struct snd_kcontrol_new aic3x_mono_controls[] = { + SOC_DOUBLE_R_TLV("Mono Line2 Bypass Volume", + LINE2L_2_MONOLOPM_VOL, LINE2R_2_MONOLOPM_VOL, + 0, 118, 1, output_stage_tlv), + SOC_DOUBLE_R_TLV("Mono PGA Bypass Volume", + PGAL_2_MONOLOPM_VOL, PGAR_2_MONOLOPM_VOL, + 0, 118, 1, output_stage_tlv), + SOC_DOUBLE_R_TLV("Mono DAC Playback Volume", + DACL1_2_MONOLOPM_VOL, DACR1_2_MONOLOPM_VOL, + 0, 118, 1, output_stage_tlv), + + SOC_SINGLE("Mono Playback Switch", MONOLOPM_CTRL, 3, 0x01, 0), + SOC_SINGLE_TLV("Mono Playback Volume", MONOLOPM_CTRL, 4, 9, 0, + out_tlv), + +}; + +/* + * Class-D amplifier gain. From 0 to 18 dB in 6 dB steps + */ +static DECLARE_TLV_DB_SCALE(classd_amp_tlv, 0, 600, 0); + +static const struct snd_kcontrol_new aic3x_classd_amp_gain_ctrl = + SOC_DOUBLE_TLV("Class-D Playback Volume", CLASSD_CTRL, 6, 4, 3, 0, classd_amp_tlv); + +/* Left DAC Mux */ +static const struct snd_kcontrol_new aic3x_left_dac_mux_controls = +SOC_DAPM_ENUM("Route", aic3x_left_dac_enum); + +/* Right DAC Mux */ +static const struct snd_kcontrol_new aic3x_right_dac_mux_controls = +SOC_DAPM_ENUM("Route", aic3x_right_dac_enum); + +/* Left HPCOM Mux */ +static const struct snd_kcontrol_new aic3x_left_hpcom_mux_controls = +SOC_DAPM_ENUM("Route", aic3x_left_hpcom_enum); + +/* Right HPCOM Mux */ +static const struct snd_kcontrol_new aic3x_right_hpcom_mux_controls = +SOC_DAPM_ENUM("Route", aic3x_right_hpcom_enum); + +/* Left Line Mixer */ +static const struct snd_kcontrol_new aic3x_left_line_mixer_controls[] = { + SOC_DAPM_SINGLE("PGAL Bypass Switch", PGAL_2_LLOPM_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("DACL1 Switch", DACL1_2_LLOPM_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("PGAR Bypass Switch", PGAR_2_LLOPM_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("DACR1 Switch", DACR1_2_LLOPM_VOL, 7, 1, 0), + /* Not on tlv320aic3104 */ + SOC_DAPM_SINGLE("Line2L Bypass Switch", LINE2L_2_LLOPM_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("Line2R Bypass Switch", LINE2R_2_LLOPM_VOL, 7, 1, 0), +}; + +/* Right Line Mixer */ +static const struct snd_kcontrol_new aic3x_right_line_mixer_controls[] = { + SOC_DAPM_SINGLE("PGAL Bypass Switch", PGAL_2_RLOPM_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("DACL1 Switch", DACL1_2_RLOPM_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("PGAR Bypass Switch", PGAR_2_RLOPM_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("DACR1 Switch", DACR1_2_RLOPM_VOL, 7, 1, 0), + /* Not on tlv320aic3104 */ + SOC_DAPM_SINGLE("Line2L Bypass Switch", LINE2L_2_RLOPM_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("Line2R Bypass Switch", LINE2R_2_RLOPM_VOL, 7, 1, 0), +}; + +/* Mono Mixer */ +static const struct snd_kcontrol_new aic3x_mono_mixer_controls[] = { + SOC_DAPM_SINGLE("Line2L Bypass Switch", LINE2L_2_MONOLOPM_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("PGAL Bypass Switch", PGAL_2_MONOLOPM_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("DACL1 Switch", DACL1_2_MONOLOPM_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("Line2R Bypass Switch", LINE2R_2_MONOLOPM_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("PGAR Bypass Switch", PGAR_2_MONOLOPM_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("DACR1 Switch", DACR1_2_MONOLOPM_VOL, 7, 1, 0), +}; + +/* Left HP Mixer */ +static const struct snd_kcontrol_new aic3x_left_hp_mixer_controls[] = { + SOC_DAPM_SINGLE("PGAL Bypass Switch", PGAL_2_HPLOUT_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("DACL1 Switch", DACL1_2_HPLOUT_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("PGAR Bypass Switch", PGAR_2_HPLOUT_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("DACR1 Switch", DACR1_2_HPLOUT_VOL, 7, 1, 0), + /* Not on tlv320aic3104 */ + SOC_DAPM_SINGLE("Line2L Bypass Switch", LINE2L_2_HPLOUT_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("Line2R Bypass Switch", LINE2R_2_HPLOUT_VOL, 7, 1, 0), +}; + +/* Right HP Mixer */ +static const struct snd_kcontrol_new aic3x_right_hp_mixer_controls[] = { + SOC_DAPM_SINGLE("PGAL Bypass Switch", PGAL_2_HPROUT_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("DACL1 Switch", DACL1_2_HPROUT_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("PGAR Bypass Switch", PGAR_2_HPROUT_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("DACR1 Switch", DACR1_2_HPROUT_VOL, 7, 1, 0), + /* Not on tlv320aic3104 */ + SOC_DAPM_SINGLE("Line2L Bypass Switch", LINE2L_2_HPROUT_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("Line2R Bypass Switch", LINE2R_2_HPROUT_VOL, 7, 1, 0), +}; + +/* Left HPCOM Mixer */ +static const struct snd_kcontrol_new aic3x_left_hpcom_mixer_controls[] = { + SOC_DAPM_SINGLE("PGAL Bypass Switch", PGAL_2_HPLCOM_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("DACL1 Switch", DACL1_2_HPLCOM_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("PGAR Bypass Switch", PGAR_2_HPLCOM_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("DACR1 Switch", DACR1_2_HPLCOM_VOL, 7, 1, 0), + /* Not on tlv320aic3104 */ + SOC_DAPM_SINGLE("Line2L Bypass Switch", LINE2L_2_HPLCOM_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("Line2R Bypass Switch", LINE2R_2_HPLCOM_VOL, 7, 1, 0), +}; + +/* Right HPCOM Mixer */ +static const struct snd_kcontrol_new aic3x_right_hpcom_mixer_controls[] = { + SOC_DAPM_SINGLE("PGAL Bypass Switch", PGAL_2_HPRCOM_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("DACL1 Switch", DACL1_2_HPRCOM_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("PGAR Bypass Switch", PGAR_2_HPRCOM_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("DACR1 Switch", DACR1_2_HPRCOM_VOL, 7, 1, 0), + /* Not on tlv320aic3104 */ + SOC_DAPM_SINGLE("Line2L Bypass Switch", LINE2L_2_HPRCOM_VOL, 7, 1, 0), + SOC_DAPM_SINGLE("Line2R Bypass Switch", LINE2R_2_HPRCOM_VOL, 7, 1, 0), +}; + +/* Left PGA Mixer */ +static const struct snd_kcontrol_new aic3x_left_pga_mixer_controls[] = { + SOC_DAPM_SINGLE_AIC3X("Line1L Switch", LINE1L_2_LADC_CTRL, 3, 1, 1), + SOC_DAPM_SINGLE_AIC3X("Line1R Switch", LINE1R_2_LADC_CTRL, 3, 1, 1), + SOC_DAPM_SINGLE_AIC3X("Line2L Switch", LINE2L_2_LADC_CTRL, 3, 1, 1), + SOC_DAPM_SINGLE_AIC3X("Mic3L Switch", MIC3LR_2_LADC_CTRL, 4, 1, 1), + SOC_DAPM_SINGLE_AIC3X("Mic3R Switch", MIC3LR_2_LADC_CTRL, 0, 1, 1), +}; + +/* Right PGA Mixer */ +static const struct snd_kcontrol_new aic3x_right_pga_mixer_controls[] = { + SOC_DAPM_SINGLE_AIC3X("Line1R Switch", LINE1R_2_RADC_CTRL, 3, 1, 1), + SOC_DAPM_SINGLE_AIC3X("Line1L Switch", LINE1L_2_RADC_CTRL, 3, 1, 1), + SOC_DAPM_SINGLE_AIC3X("Line2R Switch", LINE2R_2_RADC_CTRL, 3, 1, 1), + SOC_DAPM_SINGLE_AIC3X("Mic3L Switch", MIC3LR_2_RADC_CTRL, 4, 1, 1), + SOC_DAPM_SINGLE_AIC3X("Mic3R Switch", MIC3LR_2_RADC_CTRL, 0, 1, 1), +}; + +/* Left PGA Mixer for tlv320aic3104 */ +static const struct snd_kcontrol_new aic3104_left_pga_mixer_controls[] = { + SOC_DAPM_SINGLE_AIC3X("Line1L Switch", LINE1L_2_LADC_CTRL, 3, 1, 1), + SOC_DAPM_SINGLE_AIC3X("Line1R Switch", LINE1R_2_LADC_CTRL, 3, 1, 1), + SOC_DAPM_SINGLE_AIC3X("Mic2L Switch", MIC3LR_2_LADC_CTRL, 4, 1, 1), + SOC_DAPM_SINGLE_AIC3X("Mic2R Switch", MIC3LR_2_LADC_CTRL, 0, 1, 1), +}; + +/* Right PGA Mixer for tlv320aic3104 */ +static const struct snd_kcontrol_new aic3104_right_pga_mixer_controls[] = { + SOC_DAPM_SINGLE_AIC3X("Line1R Switch", LINE1R_2_RADC_CTRL, 3, 1, 1), + SOC_DAPM_SINGLE_AIC3X("Line1L Switch", LINE1L_2_RADC_CTRL, 3, 1, 1), + SOC_DAPM_SINGLE_AIC3X("Mic2L Switch", MIC3LR_2_RADC_CTRL, 4, 1, 1), + SOC_DAPM_SINGLE_AIC3X("Mic2R Switch", MIC3LR_2_RADC_CTRL, 0, 1, 1), +}; + +/* Left Line1 Mux */ +static const struct snd_kcontrol_new aic3x_left_line1l_mux_controls = +SOC_DAPM_ENUM("Route", aic3x_line1l_2_l_enum); +static const struct snd_kcontrol_new aic3x_right_line1l_mux_controls = +SOC_DAPM_ENUM("Route", aic3x_line1l_2_r_enum); + +/* Right Line1 Mux */ +static const struct snd_kcontrol_new aic3x_right_line1r_mux_controls = +SOC_DAPM_ENUM("Route", aic3x_line1r_2_r_enum); +static const struct snd_kcontrol_new aic3x_left_line1r_mux_controls = +SOC_DAPM_ENUM("Route", aic3x_line1r_2_l_enum); + +/* Left Line2 Mux */ +static const struct snd_kcontrol_new aic3x_left_line2_mux_controls = +SOC_DAPM_ENUM("Route", aic3x_line2l_2_ldac_enum); + +/* Right Line2 Mux */ +static const struct snd_kcontrol_new aic3x_right_line2_mux_controls = +SOC_DAPM_ENUM("Route", aic3x_line2r_2_rdac_enum); + +static const struct snd_soc_dapm_widget aic3x_dapm_widgets[] = { + /* Left DAC to Left Outputs */ + SND_SOC_DAPM_DAC("Left DAC", "Left Playback", DAC_PWR, 7, 0), + SND_SOC_DAPM_MUX("Left DAC Mux", SND_SOC_NOPM, 0, 0, + &aic3x_left_dac_mux_controls), + SND_SOC_DAPM_MUX("Left HPCOM Mux", SND_SOC_NOPM, 0, 0, + &aic3x_left_hpcom_mux_controls), + SND_SOC_DAPM_PGA("Left Line Out", LLOPM_CTRL, 0, 0, NULL, 0), + SND_SOC_DAPM_PGA("Left HP Out", HPLOUT_CTRL, 0, 0, NULL, 0), + SND_SOC_DAPM_PGA("Left HP Com", HPLCOM_CTRL, 0, 0, NULL, 0), + + /* Right DAC to Right Outputs */ + SND_SOC_DAPM_DAC("Right DAC", "Right Playback", DAC_PWR, 6, 0), + SND_SOC_DAPM_MUX("Right DAC Mux", SND_SOC_NOPM, 0, 0, + &aic3x_right_dac_mux_controls), + SND_SOC_DAPM_MUX("Right HPCOM Mux", SND_SOC_NOPM, 0, 0, + &aic3x_right_hpcom_mux_controls), + SND_SOC_DAPM_PGA("Right Line Out", RLOPM_CTRL, 0, 0, NULL, 0), + SND_SOC_DAPM_PGA("Right HP Out", HPROUT_CTRL, 0, 0, NULL, 0), + SND_SOC_DAPM_PGA("Right HP Com", HPRCOM_CTRL, 0, 0, NULL, 0), + + /* Inputs to Left ADC */ + SND_SOC_DAPM_ADC("Left ADC", "Left Capture", LINE1L_2_LADC_CTRL, 2, 0), + SND_SOC_DAPM_MUX("Left Line1L Mux", SND_SOC_NOPM, 0, 0, + &aic3x_left_line1l_mux_controls), + SND_SOC_DAPM_MUX("Left Line1R Mux", SND_SOC_NOPM, 0, 0, + &aic3x_left_line1r_mux_controls), + + /* Inputs to Right ADC */ + SND_SOC_DAPM_ADC("Right ADC", "Right Capture", + LINE1R_2_RADC_CTRL, 2, 0), + SND_SOC_DAPM_MUX("Right Line1L Mux", SND_SOC_NOPM, 0, 0, + &aic3x_right_line1l_mux_controls), + SND_SOC_DAPM_MUX("Right Line1R Mux", SND_SOC_NOPM, 0, 0, + &aic3x_right_line1r_mux_controls), + + /* Mic Bias */ + SND_SOC_DAPM_SUPPLY("Mic Bias", MICBIAS_CTRL, 6, 0, + mic_bias_event, + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), + + SND_SOC_DAPM_OUTPUT("LLOUT"), + SND_SOC_DAPM_OUTPUT("RLOUT"), + SND_SOC_DAPM_OUTPUT("HPLOUT"), + SND_SOC_DAPM_OUTPUT("HPROUT"), + SND_SOC_DAPM_OUTPUT("HPLCOM"), + SND_SOC_DAPM_OUTPUT("HPRCOM"), + + SND_SOC_DAPM_INPUT("LINE1L"), + SND_SOC_DAPM_INPUT("LINE1R"), + + /* + * Virtual output pin to detection block inside codec. This can be + * used to keep codec bias on if gpio or detection features are needed. + * Force pin on or construct a path with an input jack and mic bias + * widgets. + */ + SND_SOC_DAPM_OUTPUT("Detection"), +}; + +/* For other than tlv320aic3104 */ +static const struct snd_soc_dapm_widget aic3x_extra_dapm_widgets[] = { + /* Inputs to Left ADC */ + SND_SOC_DAPM_MIXER("Left PGA Mixer", SND_SOC_NOPM, 0, 0, + &aic3x_left_pga_mixer_controls[0], + ARRAY_SIZE(aic3x_left_pga_mixer_controls)), + SND_SOC_DAPM_MUX("Left Line2L Mux", SND_SOC_NOPM, 0, 0, + &aic3x_left_line2_mux_controls), + + /* Inputs to Right ADC */ + SND_SOC_DAPM_MIXER("Right PGA Mixer", SND_SOC_NOPM, 0, 0, + &aic3x_right_pga_mixer_controls[0], + ARRAY_SIZE(aic3x_right_pga_mixer_controls)), + SND_SOC_DAPM_MUX("Right Line2R Mux", SND_SOC_NOPM, 0, 0, + &aic3x_right_line2_mux_controls), + + /* + * Not a real mic bias widget but similar function. This is for dynamic + * control of GPIO1 digital mic modulator clock output function when + * using digital mic. + */ + SND_SOC_DAPM_REG(snd_soc_dapm_micbias, "GPIO1 dmic modclk", + AIC3X_GPIO1_REG, 4, 0xf, + AIC3X_GPIO1_FUNC_DIGITAL_MIC_MODCLK, + AIC3X_GPIO1_FUNC_DISABLED), + + /* + * Also similar function like mic bias. Selects digital mic with + * configurable oversampling rate instead of ADC converter. + */ + SND_SOC_DAPM_REG(snd_soc_dapm_micbias, "DMic Rate 128", + AIC3X_ASD_INTF_CTRLA, 0, 3, 1, 0), + SND_SOC_DAPM_REG(snd_soc_dapm_micbias, "DMic Rate 64", + AIC3X_ASD_INTF_CTRLA, 0, 3, 2, 0), + SND_SOC_DAPM_REG(snd_soc_dapm_micbias, "DMic Rate 32", + AIC3X_ASD_INTF_CTRLA, 0, 3, 3, 0), + + /* Output mixers */ + SND_SOC_DAPM_MIXER("Left Line Mixer", SND_SOC_NOPM, 0, 0, + &aic3x_left_line_mixer_controls[0], + ARRAY_SIZE(aic3x_left_line_mixer_controls)), + SND_SOC_DAPM_MIXER("Right Line Mixer", SND_SOC_NOPM, 0, 0, + &aic3x_right_line_mixer_controls[0], + ARRAY_SIZE(aic3x_right_line_mixer_controls)), + SND_SOC_DAPM_MIXER("Left HP Mixer", SND_SOC_NOPM, 0, 0, + &aic3x_left_hp_mixer_controls[0], + ARRAY_SIZE(aic3x_left_hp_mixer_controls)), + SND_SOC_DAPM_MIXER("Right HP Mixer", SND_SOC_NOPM, 0, 0, + &aic3x_right_hp_mixer_controls[0], + ARRAY_SIZE(aic3x_right_hp_mixer_controls)), + SND_SOC_DAPM_MIXER("Left HPCOM Mixer", SND_SOC_NOPM, 0, 0, + &aic3x_left_hpcom_mixer_controls[0], + ARRAY_SIZE(aic3x_left_hpcom_mixer_controls)), + SND_SOC_DAPM_MIXER("Right HPCOM Mixer", SND_SOC_NOPM, 0, 0, + &aic3x_right_hpcom_mixer_controls[0], + ARRAY_SIZE(aic3x_right_hpcom_mixer_controls)), + + SND_SOC_DAPM_INPUT("MIC3L"), + SND_SOC_DAPM_INPUT("MIC3R"), + SND_SOC_DAPM_INPUT("LINE2L"), + SND_SOC_DAPM_INPUT("LINE2R"), +}; + +/* For tlv320aic3104 */ +static const struct snd_soc_dapm_widget aic3104_extra_dapm_widgets[] = { + /* Inputs to Left ADC */ + SND_SOC_DAPM_MIXER("Left PGA Mixer", SND_SOC_NOPM, 0, 0, + &aic3104_left_pga_mixer_controls[0], + ARRAY_SIZE(aic3104_left_pga_mixer_controls)), + + /* Inputs to Right ADC */ + SND_SOC_DAPM_MIXER("Right PGA Mixer", SND_SOC_NOPM, 0, 0, + &aic3104_right_pga_mixer_controls[0], + ARRAY_SIZE(aic3104_right_pga_mixer_controls)), + + /* Output mixers */ + SND_SOC_DAPM_MIXER("Left Line Mixer", SND_SOC_NOPM, 0, 0, + &aic3x_left_line_mixer_controls[0], + ARRAY_SIZE(aic3x_left_line_mixer_controls) - 2), + SND_SOC_DAPM_MIXER("Right Line Mixer", SND_SOC_NOPM, 0, 0, + &aic3x_right_line_mixer_controls[0], + ARRAY_SIZE(aic3x_right_line_mixer_controls) - 2), + SND_SOC_DAPM_MIXER("Left HP Mixer", SND_SOC_NOPM, 0, 0, + &aic3x_left_hp_mixer_controls[0], + ARRAY_SIZE(aic3x_left_hp_mixer_controls) - 2), + SND_SOC_DAPM_MIXER("Right HP Mixer", SND_SOC_NOPM, 0, 0, + &aic3x_right_hp_mixer_controls[0], + ARRAY_SIZE(aic3x_right_hp_mixer_controls) - 2), + SND_SOC_DAPM_MIXER("Left HPCOM Mixer", SND_SOC_NOPM, 0, 0, + &aic3x_left_hpcom_mixer_controls[0], + ARRAY_SIZE(aic3x_left_hpcom_mixer_controls) - 2), + SND_SOC_DAPM_MIXER("Right HPCOM Mixer", SND_SOC_NOPM, 0, 0, + &aic3x_right_hpcom_mixer_controls[0], + ARRAY_SIZE(aic3x_right_hpcom_mixer_controls) - 2), + + SND_SOC_DAPM_INPUT("MIC2L"), + SND_SOC_DAPM_INPUT("MIC2R"), +}; + +static const struct snd_soc_dapm_widget aic3x_dapm_mono_widgets[] = { + /* Mono Output */ + SND_SOC_DAPM_PGA("Mono Out", MONOLOPM_CTRL, 0, 0, NULL, 0), + + SND_SOC_DAPM_MIXER("Mono Mixer", SND_SOC_NOPM, 0, 0, + &aic3x_mono_mixer_controls[0], + ARRAY_SIZE(aic3x_mono_mixer_controls)), + + SND_SOC_DAPM_OUTPUT("MONO_LOUT"), +}; + +static const struct snd_soc_dapm_widget aic3007_dapm_widgets[] = { + /* Class-D outputs */ + SND_SOC_DAPM_PGA("Left Class-D Out", CLASSD_CTRL, 3, 0, NULL, 0), + SND_SOC_DAPM_PGA("Right Class-D Out", CLASSD_CTRL, 2, 0, NULL, 0), + + SND_SOC_DAPM_OUTPUT("SPOP"), + SND_SOC_DAPM_OUTPUT("SPOM"), +}; + +static const struct snd_soc_dapm_route intercon[] = { + /* Left Input */ + {"Left Line1L Mux", "single-ended", "LINE1L"}, + {"Left Line1L Mux", "differential", "LINE1L"}, + {"Left Line1R Mux", "single-ended", "LINE1R"}, + {"Left Line1R Mux", "differential", "LINE1R"}, + + {"Left PGA Mixer", "Line1L Switch", "Left Line1L Mux"}, + {"Left PGA Mixer", "Line1R Switch", "Left Line1R Mux"}, + + {"Left ADC", NULL, "Left PGA Mixer"}, + + /* Right Input */ + {"Right Line1R Mux", "single-ended", "LINE1R"}, + {"Right Line1R Mux", "differential", "LINE1R"}, + {"Right Line1L Mux", "single-ended", "LINE1L"}, + {"Right Line1L Mux", "differential", "LINE1L"}, + + {"Right PGA Mixer", "Line1L Switch", "Right Line1L Mux"}, + {"Right PGA Mixer", "Line1R Switch", "Right Line1R Mux"}, + + {"Right ADC", NULL, "Right PGA Mixer"}, + + /* Left DAC Output */ + {"Left DAC Mux", "DAC_L1", "Left DAC"}, + {"Left DAC Mux", "DAC_L2", "Left DAC"}, + {"Left DAC Mux", "DAC_L3", "Left DAC"}, + + /* Right DAC Output */ + {"Right DAC Mux", "DAC_R1", "Right DAC"}, + {"Right DAC Mux", "DAC_R2", "Right DAC"}, + {"Right DAC Mux", "DAC_R3", "Right DAC"}, + + /* Left Line Output */ + {"Left Line Mixer", "PGAL Bypass Switch", "Left PGA Mixer"}, + {"Left Line Mixer", "DACL1 Switch", "Left DAC Mux"}, + {"Left Line Mixer", "PGAR Bypass Switch", "Right PGA Mixer"}, + {"Left Line Mixer", "DACR1 Switch", "Right DAC Mux"}, + + {"Left Line Out", NULL, "Left Line Mixer"}, + {"Left Line Out", NULL, "Left DAC Mux"}, + {"LLOUT", NULL, "Left Line Out"}, + + /* Right Line Output */ + {"Right Line Mixer", "PGAL Bypass Switch", "Left PGA Mixer"}, + {"Right Line Mixer", "DACL1 Switch", "Left DAC Mux"}, + {"Right Line Mixer", "PGAR Bypass Switch", "Right PGA Mixer"}, + {"Right Line Mixer", "DACR1 Switch", "Right DAC Mux"}, + + {"Right Line Out", NULL, "Right Line Mixer"}, + {"Right Line Out", NULL, "Right DAC Mux"}, + {"RLOUT", NULL, "Right Line Out"}, + + /* Left HP Output */ + {"Left HP Mixer", "PGAL Bypass Switch", "Left PGA Mixer"}, + {"Left HP Mixer", "DACL1 Switch", "Left DAC Mux"}, + {"Left HP Mixer", "PGAR Bypass Switch", "Right PGA Mixer"}, + {"Left HP Mixer", "DACR1 Switch", "Right DAC Mux"}, + + {"Left HP Out", NULL, "Left HP Mixer"}, + {"Left HP Out", NULL, "Left DAC Mux"}, + {"HPLOUT", NULL, "Left HP Out"}, + + /* Right HP Output */ + {"Right HP Mixer", "PGAL Bypass Switch", "Left PGA Mixer"}, + {"Right HP Mixer", "DACL1 Switch", "Left DAC Mux"}, + {"Right HP Mixer", "PGAR Bypass Switch", "Right PGA Mixer"}, + {"Right HP Mixer", "DACR1 Switch", "Right DAC Mux"}, + + {"Right HP Out", NULL, "Right HP Mixer"}, + {"Right HP Out", NULL, "Right DAC Mux"}, + {"HPROUT", NULL, "Right HP Out"}, + + /* Left HPCOM Output */ + {"Left HPCOM Mixer", "PGAL Bypass Switch", "Left PGA Mixer"}, + {"Left HPCOM Mixer", "DACL1 Switch", "Left DAC Mux"}, + {"Left HPCOM Mixer", "PGAR Bypass Switch", "Right PGA Mixer"}, + {"Left HPCOM Mixer", "DACR1 Switch", "Right DAC Mux"}, + + {"Left HPCOM Mux", "differential of HPLOUT", "Left HP Mixer"}, + {"Left HPCOM Mux", "constant VCM", "Left HPCOM Mixer"}, + {"Left HPCOM Mux", "single-ended", "Left HPCOM Mixer"}, + {"Left HP Com", NULL, "Left HPCOM Mux"}, + {"HPLCOM", NULL, "Left HP Com"}, + + /* Right HPCOM Output */ + {"Right HPCOM Mixer", "PGAL Bypass Switch", "Left PGA Mixer"}, + {"Right HPCOM Mixer", "DACL1 Switch", "Left DAC Mux"}, + {"Right HPCOM Mixer", "PGAR Bypass Switch", "Right PGA Mixer"}, + {"Right HPCOM Mixer", "DACR1 Switch", "Right DAC Mux"}, + + {"Right HPCOM Mux", "differential of HPROUT", "Right HP Mixer"}, + {"Right HPCOM Mux", "constant VCM", "Right HPCOM Mixer"}, + {"Right HPCOM Mux", "single-ended", "Right HPCOM Mixer"}, + {"Right HPCOM Mux", "differential of HPLCOM", "Left HPCOM Mixer"}, + {"Right HPCOM Mux", "external feedback", "Right HPCOM Mixer"}, + {"Right HP Com", NULL, "Right HPCOM Mux"}, + {"HPRCOM", NULL, "Right HP Com"}, +}; + +/* For other than tlv320aic3104 */ +static const struct snd_soc_dapm_route intercon_extra[] = { + /* Left Input */ + {"Left Line2L Mux", "single-ended", "LINE2L"}, + {"Left Line2L Mux", "differential", "LINE2L"}, + + {"Left PGA Mixer", "Line2L Switch", "Left Line2L Mux"}, + {"Left PGA Mixer", "Mic3L Switch", "MIC3L"}, + {"Left PGA Mixer", "Mic3R Switch", "MIC3R"}, + + {"Left ADC", NULL, "GPIO1 dmic modclk"}, + + /* Right Input */ + {"Right Line2R Mux", "single-ended", "LINE2R"}, + {"Right Line2R Mux", "differential", "LINE2R"}, + + {"Right PGA Mixer", "Line2R Switch", "Right Line2R Mux"}, + {"Right PGA Mixer", "Mic3L Switch", "MIC3L"}, + {"Right PGA Mixer", "Mic3R Switch", "MIC3R"}, + + {"Right ADC", NULL, "GPIO1 dmic modclk"}, + + /* + * Logical path between digital mic enable and GPIO1 modulator clock + * output function + */ + {"GPIO1 dmic modclk", NULL, "DMic Rate 128"}, + {"GPIO1 dmic modclk", NULL, "DMic Rate 64"}, + {"GPIO1 dmic modclk", NULL, "DMic Rate 32"}, + + /* Left Line Output */ + {"Left Line Mixer", "Line2L Bypass Switch", "Left Line2L Mux"}, + {"Left Line Mixer", "Line2R Bypass Switch", "Right Line2R Mux"}, + + /* Right Line Output */ + {"Right Line Mixer", "Line2L Bypass Switch", "Left Line2L Mux"}, + {"Right Line Mixer", "Line2R Bypass Switch", "Right Line2R Mux"}, + + /* Left HP Output */ + {"Left HP Mixer", "Line2L Bypass Switch", "Left Line2L Mux"}, + {"Left HP Mixer", "Line2R Bypass Switch", "Right Line2R Mux"}, + + /* Right HP Output */ + {"Right HP Mixer", "Line2L Bypass Switch", "Left Line2L Mux"}, + {"Right HP Mixer", "Line2R Bypass Switch", "Right Line2R Mux"}, + + /* Left HPCOM Output */ + {"Left HPCOM Mixer", "Line2L Bypass Switch", "Left Line2L Mux"}, + {"Left HPCOM Mixer", "Line2R Bypass Switch", "Right Line2R Mux"}, + + /* Right HPCOM Output */ + {"Right HPCOM Mixer", "Line2L Bypass Switch", "Left Line2L Mux"}, + {"Right HPCOM Mixer", "Line2R Bypass Switch", "Right Line2R Mux"}, +}; + +/* For tlv320aic3104 */ +static const struct snd_soc_dapm_route intercon_extra_3104[] = { + /* Left Input */ + {"Left PGA Mixer", "Mic2L Switch", "MIC2L"}, + {"Left PGA Mixer", "Mic2R Switch", "MIC2R"}, + + /* Right Input */ + {"Right PGA Mixer", "Mic2L Switch", "MIC2L"}, + {"Right PGA Mixer", "Mic2R Switch", "MIC2R"}, +}; + +static const struct snd_soc_dapm_route intercon_mono[] = { + /* Mono Output */ + {"Mono Mixer", "Line2L Bypass Switch", "Left Line2L Mux"}, + {"Mono Mixer", "PGAL Bypass Switch", "Left PGA Mixer"}, + {"Mono Mixer", "DACL1 Switch", "Left DAC Mux"}, + {"Mono Mixer", "Line2R Bypass Switch", "Right Line2R Mux"}, + {"Mono Mixer", "PGAR Bypass Switch", "Right PGA Mixer"}, + {"Mono Mixer", "DACR1 Switch", "Right DAC Mux"}, + {"Mono Out", NULL, "Mono Mixer"}, + {"MONO_LOUT", NULL, "Mono Out"}, +}; + +static const struct snd_soc_dapm_route intercon_3007[] = { + /* Class-D outputs */ + {"Left Class-D Out", NULL, "Left Line Out"}, + {"Right Class-D Out", NULL, "Left Line Out"}, + {"SPOP", NULL, "Left Class-D Out"}, + {"SPOM", NULL, "Right Class-D Out"}, +}; + +static int aic3x_add_widgets(struct snd_soc_component *component) +{ + struct aic3x_priv *aic3x = snd_soc_component_get_drvdata(component); + struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component); + + switch (aic3x->model) { + case AIC3X_MODEL_3X: + case AIC3X_MODEL_33: + snd_soc_dapm_new_controls(dapm, aic3x_extra_dapm_widgets, + ARRAY_SIZE(aic3x_extra_dapm_widgets)); + snd_soc_dapm_add_routes(dapm, intercon_extra, + ARRAY_SIZE(intercon_extra)); + snd_soc_dapm_new_controls(dapm, aic3x_dapm_mono_widgets, + ARRAY_SIZE(aic3x_dapm_mono_widgets)); + snd_soc_dapm_add_routes(dapm, intercon_mono, + ARRAY_SIZE(intercon_mono)); + break; + case AIC3X_MODEL_3007: + snd_soc_dapm_new_controls(dapm, aic3x_extra_dapm_widgets, + ARRAY_SIZE(aic3x_extra_dapm_widgets)); + snd_soc_dapm_add_routes(dapm, intercon_extra, + ARRAY_SIZE(intercon_extra)); + snd_soc_dapm_new_controls(dapm, aic3007_dapm_widgets, + ARRAY_SIZE(aic3007_dapm_widgets)); + snd_soc_dapm_add_routes(dapm, intercon_3007, + ARRAY_SIZE(intercon_3007)); + break; + case AIC3X_MODEL_3104: + snd_soc_dapm_new_controls(dapm, aic3104_extra_dapm_widgets, + ARRAY_SIZE(aic3104_extra_dapm_widgets)); + snd_soc_dapm_add_routes(dapm, intercon_extra_3104, + ARRAY_SIZE(intercon_extra_3104)); + break; + } + + return 0; +} + +static int aic3x_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct aic3x_priv *aic3x = snd_soc_component_get_drvdata(component); + int codec_clk = 0, bypass_pll = 0, fsref, last_clk = 0; + u8 data, j, r, p, pll_q, pll_p = 1, pll_r = 1, pll_j = 1; + u16 d, pll_d = 1; + int clk; + int width = aic3x->slot_width; + + if (!width) + width = params_width(params); + + /* select data word length */ + data = snd_soc_component_read(component, AIC3X_ASD_INTF_CTRLB) & (~(0x3 << 4)); + switch (width) { + case 16: + break; + case 20: + data |= (0x01 << 4); + break; + case 24: + data |= (0x02 << 4); + break; + case 32: + data |= (0x03 << 4); + break; + } + snd_soc_component_write(component, AIC3X_ASD_INTF_CTRLB, data); + + /* Fsref can be 44100 or 48000 */ + fsref = (params_rate(params) % 11025 == 0) ? 44100 : 48000; + + /* Try to find a value for Q which allows us to bypass the PLL and + * generate CODEC_CLK directly. */ + for (pll_q = 2; pll_q < 18; pll_q++) + if (aic3x->sysclk / (128 * pll_q) == fsref) { + bypass_pll = 1; + break; + } + + if (bypass_pll) { + pll_q &= 0xf; + snd_soc_component_write(component, AIC3X_PLL_PROGA_REG, pll_q << PLLQ_SHIFT); + snd_soc_component_write(component, AIC3X_GPIOB_REG, CODEC_CLKIN_CLKDIV); + /* disable PLL if it is bypassed */ + snd_soc_component_update_bits(component, AIC3X_PLL_PROGA_REG, PLL_ENABLE, 0); + + } else { + snd_soc_component_write(component, AIC3X_GPIOB_REG, CODEC_CLKIN_PLLDIV); + /* enable PLL when it is used */ + snd_soc_component_update_bits(component, AIC3X_PLL_PROGA_REG, + PLL_ENABLE, PLL_ENABLE); + } + + /* Route Left DAC to left channel input and + * right DAC to right channel input */ + data = (LDAC2LCH | RDAC2RCH); + data |= (fsref == 44100) ? FSREF_44100 : FSREF_48000; + if (params_rate(params) >= 64000) + data |= DUAL_RATE_MODE; + snd_soc_component_write(component, AIC3X_CODEC_DATAPATH_REG, data); + + /* codec sample rate select */ + data = (fsref * 20) / params_rate(params); + if (params_rate(params) < 64000) + data /= 2; + data /= 5; + data -= 2; + data |= (data << 4); + snd_soc_component_write(component, AIC3X_SAMPLE_RATE_SEL_REG, data); + + if (bypass_pll) + return 0; + + /* Use PLL, compute appropriate setup for j, d, r and p, the closest + * one wins the game. Try with d==0 first, next with d!=0. + * Constraints for j are according to the datasheet. + * The sysclk is divided by 1000 to prevent integer overflows. + */ + + codec_clk = (2048 * fsref) / (aic3x->sysclk / 1000); + + for (r = 1; r <= 16; r++) + for (p = 1; p <= 8; p++) { + for (j = 4; j <= 55; j++) { + /* This is actually 1000*((j+(d/10000))*r)/p + * The term had to be converted to get + * rid of the division by 10000; d = 0 here + */ + int tmp_clk = (1000 * j * r) / p; + + /* Check whether this values get closer than + * the best ones we had before + */ + if (abs(codec_clk - tmp_clk) < + abs(codec_clk - last_clk)) { + pll_j = j; pll_d = 0; + pll_r = r; pll_p = p; + last_clk = tmp_clk; + } + + /* Early exit for exact matches */ + if (tmp_clk == codec_clk) + goto found; + } + } + + /* try with d != 0 */ + for (p = 1; p <= 8; p++) { + j = codec_clk * p / 1000; + + if (j < 4 || j > 11) + continue; + + /* do not use codec_clk here since we'd loose precision */ + d = ((2048 * p * fsref) - j * aic3x->sysclk) + * 100 / (aic3x->sysclk/100); + + clk = (10000 * j + d) / (10 * p); + + /* check whether this values get closer than the best + * ones we had before */ + if (abs(codec_clk - clk) < abs(codec_clk - last_clk)) { + pll_j = j; pll_d = d; pll_r = 1; pll_p = p; + last_clk = clk; + } + + /* Early exit for exact matches */ + if (clk == codec_clk) + goto found; + } + + if (last_clk == 0) { + printk(KERN_ERR "%s(): unable to setup PLL\n", __func__); + return -EINVAL; + } + +found: + snd_soc_component_update_bits(component, AIC3X_PLL_PROGA_REG, PLLP_MASK, pll_p); + snd_soc_component_write(component, AIC3X_OVRF_STATUS_AND_PLLR_REG, + pll_r << PLLR_SHIFT); + snd_soc_component_write(component, AIC3X_PLL_PROGB_REG, pll_j << PLLJ_SHIFT); + snd_soc_component_write(component, AIC3X_PLL_PROGC_REG, + (pll_d >> 6) << PLLD_MSB_SHIFT); + snd_soc_component_write(component, AIC3X_PLL_PROGD_REG, + (pll_d & 0x3F) << PLLD_LSB_SHIFT); + + return 0; +} + +static int aic3x_prepare(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct aic3x_priv *aic3x = snd_soc_component_get_drvdata(component); + int delay = 0; + int width = aic3x->slot_width; + + if (!width) + width = substream->runtime->sample_bits; + + /* TDM slot selection only valid in DSP_A/_B mode */ + if (aic3x->dai_fmt == SND_SOC_DAIFMT_DSP_A) + delay += (aic3x->tdm_delay*width + 1); + else if (aic3x->dai_fmt == SND_SOC_DAIFMT_DSP_B) + delay += aic3x->tdm_delay*width; + + /* Configure data delay */ + snd_soc_component_write(component, AIC3X_ASD_INTF_CTRLC, delay); + + return 0; +} + +static int aic3x_mute(struct snd_soc_dai *dai, int mute, int direction) +{ + struct snd_soc_component *component = dai->component; + u8 ldac_reg = snd_soc_component_read(component, LDAC_VOL) & ~MUTE_ON; + u8 rdac_reg = snd_soc_component_read(component, RDAC_VOL) & ~MUTE_ON; + + if (mute) { + snd_soc_component_write(component, LDAC_VOL, ldac_reg | MUTE_ON); + snd_soc_component_write(component, RDAC_VOL, rdac_reg | MUTE_ON); + } else { + snd_soc_component_write(component, LDAC_VOL, ldac_reg); + snd_soc_component_write(component, RDAC_VOL, rdac_reg); + } + + return 0; +} + +static int aic3x_set_dai_sysclk(struct snd_soc_dai *codec_dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_component *component = codec_dai->component; + struct aic3x_priv *aic3x = snd_soc_component_get_drvdata(component); + + /* set clock on MCLK or GPIO2 or BCLK */ + snd_soc_component_update_bits(component, AIC3X_CLKGEN_CTRL_REG, PLLCLK_IN_MASK, + clk_id << PLLCLK_IN_SHIFT); + snd_soc_component_update_bits(component, AIC3X_CLKGEN_CTRL_REG, CLKDIV_IN_MASK, + clk_id << CLKDIV_IN_SHIFT); + + aic3x->sysclk = freq; + return 0; +} + +static int aic3x_set_dai_fmt(struct snd_soc_dai *codec_dai, + unsigned int fmt) +{ + struct snd_soc_component *component = codec_dai->component; + struct aic3x_priv *aic3x = snd_soc_component_get_drvdata(component); + u8 iface_areg, iface_breg; + + iface_areg = snd_soc_component_read(component, AIC3X_ASD_INTF_CTRLA) & 0x3f; + iface_breg = snd_soc_component_read(component, AIC3X_ASD_INTF_CTRLB) & 0x3f; + + /* set master/slave audio interface */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + aic3x->master = 1; + iface_areg |= BIT_CLK_MASTER | WORD_CLK_MASTER; + break; + case SND_SOC_DAIFMT_CBS_CFS: + aic3x->master = 0; + iface_areg &= ~(BIT_CLK_MASTER | WORD_CLK_MASTER); + break; + case SND_SOC_DAIFMT_CBM_CFS: + aic3x->master = 1; + iface_areg |= BIT_CLK_MASTER; + iface_areg &= ~WORD_CLK_MASTER; + break; + case SND_SOC_DAIFMT_CBS_CFM: + aic3x->master = 1; + iface_areg |= WORD_CLK_MASTER; + iface_areg &= ~BIT_CLK_MASTER; + break; + default: + return -EINVAL; + } + + /* + * match both interface format and signal polarities since they + * are fixed + */ + switch (fmt & (SND_SOC_DAIFMT_FORMAT_MASK | + SND_SOC_DAIFMT_INV_MASK)) { + case (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF): + break; + case (SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_IB_NF): + case (SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_IB_NF): + iface_breg |= (0x01 << 6); + break; + case (SND_SOC_DAIFMT_RIGHT_J | SND_SOC_DAIFMT_NB_NF): + iface_breg |= (0x02 << 6); + break; + case (SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_NB_NF): + iface_breg |= (0x03 << 6); + break; + default: + return -EINVAL; + } + + aic3x->dai_fmt = fmt & SND_SOC_DAIFMT_FORMAT_MASK; + + /* set iface */ + snd_soc_component_write(component, AIC3X_ASD_INTF_CTRLA, iface_areg); + snd_soc_component_write(component, AIC3X_ASD_INTF_CTRLB, iface_breg); + + return 0; +} + +static int aic3x_set_dai_tdm_slot(struct snd_soc_dai *codec_dai, + unsigned int tx_mask, unsigned int rx_mask, + int slots, int slot_width) +{ + struct snd_soc_component *component = codec_dai->component; + struct aic3x_priv *aic3x = snd_soc_component_get_drvdata(component); + unsigned int lsb; + + if (tx_mask != rx_mask) { + dev_err(component->dev, "tx and rx masks must be symmetric\n"); + return -EINVAL; + } + + if (unlikely(!tx_mask)) { + dev_err(component->dev, "tx and rx masks need to be non 0\n"); + return -EINVAL; + } + + /* TDM based on DSP mode requires slots to be adjacent */ + lsb = __ffs(tx_mask); + if ((lsb + 1) != __fls(tx_mask)) { + dev_err(component->dev, "Invalid mask, slots must be adjacent\n"); + return -EINVAL; + } + + switch (slot_width) { + case 16: + case 20: + case 24: + case 32: + break; + default: + dev_err(component->dev, "Unsupported slot width %d\n", slot_width); + return -EINVAL; + } + + + aic3x->tdm_delay = lsb; + aic3x->slot_width = slot_width; + + /* DOUT in high-impedance on inactive bit clocks */ + snd_soc_component_update_bits(component, AIC3X_ASD_INTF_CTRLA, + DOUT_TRISTATE, DOUT_TRISTATE); + + return 0; +} + +static int aic3x_regulator_event(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct aic3x_disable_nb *disable_nb = + container_of(nb, struct aic3x_disable_nb, nb); + struct aic3x_priv *aic3x = disable_nb->aic3x; + + if (event & REGULATOR_EVENT_DISABLE) { + /* + * Put codec to reset and require cache sync as at least one + * of the supplies was disabled + */ + if (gpio_is_valid(aic3x->gpio_reset)) + gpio_set_value(aic3x->gpio_reset, 0); + regcache_mark_dirty(aic3x->regmap); + } + + return 0; +} + +static int aic3x_set_power(struct snd_soc_component *component, int power) +{ + struct aic3x_priv *aic3x = snd_soc_component_get_drvdata(component); + unsigned int pll_c, pll_d; + int ret; + + if (power) { + ret = regulator_bulk_enable(ARRAY_SIZE(aic3x->supplies), + aic3x->supplies); + if (ret) + goto out; + aic3x->power = 1; + + if (gpio_is_valid(aic3x->gpio_reset)) { + udelay(1); + gpio_set_value(aic3x->gpio_reset, 1); + } + + /* Sync reg_cache with the hardware */ + regcache_cache_only(aic3x->regmap, false); + regcache_sync(aic3x->regmap); + + /* Rewrite paired PLL D registers in case cached sync skipped + * writing one of them and thus caused other one also not + * being written + */ + pll_c = snd_soc_component_read(component, AIC3X_PLL_PROGC_REG); + pll_d = snd_soc_component_read(component, AIC3X_PLL_PROGD_REG); + if (pll_c == aic3x_reg[AIC3X_PLL_PROGC_REG].def || + pll_d == aic3x_reg[AIC3X_PLL_PROGD_REG].def) { + snd_soc_component_write(component, AIC3X_PLL_PROGC_REG, pll_c); + snd_soc_component_write(component, AIC3X_PLL_PROGD_REG, pll_d); + } + + /* + * Delay is needed to reduce pop-noise after syncing back the + * registers + */ + mdelay(50); + } else { + /* + * Do soft reset to this codec instance in order to clear + * possible VDD leakage currents in case the supply regulators + * remain on + */ + snd_soc_component_write(component, AIC3X_RESET, SOFT_RESET); + regcache_mark_dirty(aic3x->regmap); + aic3x->power = 0; + /* HW writes are needless when bias is off */ + regcache_cache_only(aic3x->regmap, true); + ret = regulator_bulk_disable(ARRAY_SIZE(aic3x->supplies), + aic3x->supplies); + } +out: + return ret; +} + +static int aic3x_set_bias_level(struct snd_soc_component *component, + enum snd_soc_bias_level level) +{ + struct aic3x_priv *aic3x = snd_soc_component_get_drvdata(component); + + switch (level) { + case SND_SOC_BIAS_ON: + break; + case SND_SOC_BIAS_PREPARE: + if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_STANDBY && + aic3x->master) { + /* enable pll */ + snd_soc_component_update_bits(component, AIC3X_PLL_PROGA_REG, + PLL_ENABLE, PLL_ENABLE); + } + break; + case SND_SOC_BIAS_STANDBY: + if (!aic3x->power) + aic3x_set_power(component, 1); + if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_PREPARE && + aic3x->master) { + /* disable pll */ + snd_soc_component_update_bits(component, AIC3X_PLL_PROGA_REG, + PLL_ENABLE, 0); + } + break; + case SND_SOC_BIAS_OFF: + if (aic3x->power) + aic3x_set_power(component, 0); + break; + } + + return 0; +} + +#define AIC3X_RATES SNDRV_PCM_RATE_8000_96000 +#define AIC3X_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ + SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S24_LE | \ + SNDRV_PCM_FMTBIT_S32_LE) + +static const struct snd_soc_dai_ops aic3x_dai_ops = { + .hw_params = aic3x_hw_params, + .prepare = aic3x_prepare, + .mute_stream = aic3x_mute, + .set_sysclk = aic3x_set_dai_sysclk, + .set_fmt = aic3x_set_dai_fmt, + .set_tdm_slot = aic3x_set_dai_tdm_slot, + .no_capture_mute = 1, +}; + +static struct snd_soc_dai_driver aic3x_dai = { + .name = "tlv320aic3x-hifi", + .playback = { + .stream_name = "Playback", + .channels_min = 2, + .channels_max = 2, + .rates = AIC3X_RATES, + .formats = AIC3X_FORMATS,}, + .capture = { + .stream_name = "Capture", + .channels_min = 2, + .channels_max = 2, + .rates = AIC3X_RATES, + .formats = AIC3X_FORMATS,}, + .ops = &aic3x_dai_ops, + .symmetric_rates = 1, +}; + +static void aic3x_mono_init(struct snd_soc_component *component) +{ + /* DAC to Mono Line Out default volume and route to Output mixer */ + snd_soc_component_write(component, DACL1_2_MONOLOPM_VOL, DEFAULT_VOL | ROUTE_ON); + snd_soc_component_write(component, DACR1_2_MONOLOPM_VOL, DEFAULT_VOL | ROUTE_ON); + + /* unmute all outputs */ + snd_soc_component_update_bits(component, MONOLOPM_CTRL, UNMUTE, UNMUTE); + + /* PGA to Mono Line Out default volume, disconnect from Output Mixer */ + snd_soc_component_write(component, PGAL_2_MONOLOPM_VOL, DEFAULT_VOL); + snd_soc_component_write(component, PGAR_2_MONOLOPM_VOL, DEFAULT_VOL); + + /* Line2 to Mono Out default volume, disconnect from Output Mixer */ + snd_soc_component_write(component, LINE2L_2_MONOLOPM_VOL, DEFAULT_VOL); + snd_soc_component_write(component, LINE2R_2_MONOLOPM_VOL, DEFAULT_VOL); +} + +/* + * initialise the AIC3X driver + * register the mixer and dsp interfaces with the kernel + */ +static int aic3x_init(struct snd_soc_component *component) +{ + struct aic3x_priv *aic3x = snd_soc_component_get_drvdata(component); + + snd_soc_component_write(component, AIC3X_PAGE_SELECT, PAGE0_SELECT); + snd_soc_component_write(component, AIC3X_RESET, SOFT_RESET); + + /* DAC default volume and mute */ + snd_soc_component_write(component, LDAC_VOL, DEFAULT_VOL | MUTE_ON); + snd_soc_component_write(component, RDAC_VOL, DEFAULT_VOL | MUTE_ON); + + /* DAC to HP default volume and route to Output mixer */ + snd_soc_component_write(component, DACL1_2_HPLOUT_VOL, DEFAULT_VOL | ROUTE_ON); + snd_soc_component_write(component, DACR1_2_HPROUT_VOL, DEFAULT_VOL | ROUTE_ON); + snd_soc_component_write(component, DACL1_2_HPLCOM_VOL, DEFAULT_VOL | ROUTE_ON); + snd_soc_component_write(component, DACR1_2_HPRCOM_VOL, DEFAULT_VOL | ROUTE_ON); + /* DAC to Line Out default volume and route to Output mixer */ + snd_soc_component_write(component, DACL1_2_LLOPM_VOL, DEFAULT_VOL | ROUTE_ON); + snd_soc_component_write(component, DACR1_2_RLOPM_VOL, DEFAULT_VOL | ROUTE_ON); + + /* unmute all outputs */ + snd_soc_component_update_bits(component, LLOPM_CTRL, UNMUTE, UNMUTE); + snd_soc_component_update_bits(component, RLOPM_CTRL, UNMUTE, UNMUTE); + snd_soc_component_update_bits(component, HPLOUT_CTRL, UNMUTE, UNMUTE); + snd_soc_component_update_bits(component, HPROUT_CTRL, UNMUTE, UNMUTE); + snd_soc_component_update_bits(component, HPLCOM_CTRL, UNMUTE, UNMUTE); + snd_soc_component_update_bits(component, HPRCOM_CTRL, UNMUTE, UNMUTE); + + /* ADC default volume and unmute */ + snd_soc_component_write(component, LADC_VOL, DEFAULT_GAIN); + snd_soc_component_write(component, RADC_VOL, DEFAULT_GAIN); + /* By default route Line1 to ADC PGA mixer */ + snd_soc_component_write(component, LINE1L_2_LADC_CTRL, 0x0); + snd_soc_component_write(component, LINE1R_2_RADC_CTRL, 0x0); + + /* PGA to HP Bypass default volume, disconnect from Output Mixer */ + snd_soc_component_write(component, PGAL_2_HPLOUT_VOL, DEFAULT_VOL); + snd_soc_component_write(component, PGAR_2_HPROUT_VOL, DEFAULT_VOL); + snd_soc_component_write(component, PGAL_2_HPLCOM_VOL, DEFAULT_VOL); + snd_soc_component_write(component, PGAR_2_HPRCOM_VOL, DEFAULT_VOL); + /* PGA to Line Out default volume, disconnect from Output Mixer */ + snd_soc_component_write(component, PGAL_2_LLOPM_VOL, DEFAULT_VOL); + snd_soc_component_write(component, PGAR_2_RLOPM_VOL, DEFAULT_VOL); + + /* On tlv320aic3104, these registers are reserved and must not be written */ + if (aic3x->model != AIC3X_MODEL_3104) { + /* Line2 to HP Bypass default volume, disconnect from Output Mixer */ + snd_soc_component_write(component, LINE2L_2_HPLOUT_VOL, DEFAULT_VOL); + snd_soc_component_write(component, LINE2R_2_HPROUT_VOL, DEFAULT_VOL); + snd_soc_component_write(component, LINE2L_2_HPLCOM_VOL, DEFAULT_VOL); + snd_soc_component_write(component, LINE2R_2_HPRCOM_VOL, DEFAULT_VOL); + /* Line2 Line Out default volume, disconnect from Output Mixer */ + snd_soc_component_write(component, LINE2L_2_LLOPM_VOL, DEFAULT_VOL); + snd_soc_component_write(component, LINE2R_2_RLOPM_VOL, DEFAULT_VOL); + } + + switch (aic3x->model) { + case AIC3X_MODEL_3X: + case AIC3X_MODEL_33: + aic3x_mono_init(component); + break; + case AIC3X_MODEL_3007: + snd_soc_component_write(component, CLASSD_CTRL, 0); + break; + } + + /* Output common-mode voltage = 1.5 V */ + snd_soc_component_update_bits(component, HPOUT_SC, HPOUT_SC_OCMV_MASK, + aic3x->ocmv << HPOUT_SC_OCMV_SHIFT); + + return 0; +} + +static bool aic3x_is_shared_reset(struct aic3x_priv *aic3x) +{ + struct aic3x_priv *a; + + list_for_each_entry(a, &reset_list, list) { + if (gpio_is_valid(aic3x->gpio_reset) && + aic3x->gpio_reset == a->gpio_reset) + return true; + } + + return false; +} + +static int aic3x_probe(struct snd_soc_component *component) +{ + struct aic3x_priv *aic3x = snd_soc_component_get_drvdata(component); + int ret, i; + + aic3x->component = component; + + for (i = 0; i < ARRAY_SIZE(aic3x->supplies); i++) { + aic3x->disable_nb[i].nb.notifier_call = aic3x_regulator_event; + aic3x->disable_nb[i].aic3x = aic3x; + ret = devm_regulator_register_notifier( + aic3x->supplies[i].consumer, + &aic3x->disable_nb[i].nb); + if (ret) { + dev_err(component->dev, + "Failed to request regulator notifier: %d\n", + ret); + return ret; + } + } + + regcache_mark_dirty(aic3x->regmap); + aic3x_init(component); + + if (aic3x->setup) { + if (aic3x->model != AIC3X_MODEL_3104) { + /* setup GPIO functions */ + snd_soc_component_write(component, AIC3X_GPIO1_REG, + (aic3x->setup->gpio_func[0] & 0xf) << 4); + snd_soc_component_write(component, AIC3X_GPIO2_REG, + (aic3x->setup->gpio_func[1] & 0xf) << 4); + } else { + dev_warn(component->dev, "GPIO functionality is not supported on tlv320aic3104\n"); + } + } + + switch (aic3x->model) { + case AIC3X_MODEL_3X: + case AIC3X_MODEL_33: + snd_soc_add_component_controls(component, aic3x_extra_snd_controls, + ARRAY_SIZE(aic3x_extra_snd_controls)); + snd_soc_add_component_controls(component, aic3x_mono_controls, + ARRAY_SIZE(aic3x_mono_controls)); + break; + case AIC3X_MODEL_3007: + snd_soc_add_component_controls(component, aic3x_extra_snd_controls, + ARRAY_SIZE(aic3x_extra_snd_controls)); + snd_soc_add_component_controls(component, + &aic3x_classd_amp_gain_ctrl, 1); + break; + case AIC3X_MODEL_3104: + break; + } + + /* set mic bias voltage */ + switch (aic3x->micbias_vg) { + case AIC3X_MICBIAS_2_0V: + case AIC3X_MICBIAS_2_5V: + case AIC3X_MICBIAS_AVDDV: + snd_soc_component_update_bits(component, MICBIAS_CTRL, + MICBIAS_LEVEL_MASK, + (aic3x->micbias_vg) << MICBIAS_LEVEL_SHIFT); + break; + case AIC3X_MICBIAS_OFF: + /* + * noting to do. target won't enter here. This is just to avoid + * compile time warning "warning: enumeration value + * 'AIC3X_MICBIAS_OFF' not handled in switch" + */ + break; + } + + aic3x_add_widgets(component); + + return 0; +} + +static const struct snd_soc_component_driver soc_component_dev_aic3x = { + .set_bias_level = aic3x_set_bias_level, + .probe = aic3x_probe, + .controls = aic3x_snd_controls, + .num_controls = ARRAY_SIZE(aic3x_snd_controls), + .dapm_widgets = aic3x_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(aic3x_dapm_widgets), + .dapm_routes = intercon, + .num_dapm_routes = ARRAY_SIZE(intercon), + .use_pmdown_time = 1, + .endianness = 1, + .non_legacy_dai_naming = 1, +}; + +static void aic3x_configure_ocmv(struct i2c_client *client) +{ + struct device_node *np = client->dev.of_node; + struct aic3x_priv *aic3x = i2c_get_clientdata(client); + u32 value; + int dvdd, avdd; + + if (np && !of_property_read_u32(np, "ai3x-ocmv", &value)) { + /* OCMV setting is forced by DT */ + if (value <= 3) { + aic3x->ocmv = value; + return; + } + } + + dvdd = regulator_get_voltage(aic3x->supplies[1].consumer); + avdd = regulator_get_voltage(aic3x->supplies[2].consumer); + + if (avdd > 3600000 || dvdd > 1950000) { + dev_warn(&client->dev, + "Too high supply voltage(s) AVDD: %d, DVDD: %d\n", + avdd, dvdd); + } else if (avdd == 3600000 && dvdd == 1950000) { + aic3x->ocmv = HPOUT_SC_OCMV_1_8V; + } else if (avdd > 3300000 && dvdd > 1800000) { + aic3x->ocmv = HPOUT_SC_OCMV_1_65V; + } else if (avdd > 3000000 && dvdd > 1650000) { + aic3x->ocmv = HPOUT_SC_OCMV_1_5V; + } else if (avdd >= 2700000 && dvdd >= 1525000) { + aic3x->ocmv = HPOUT_SC_OCMV_1_35V; + } else { + dev_warn(&client->dev, + "Invalid supply voltage(s) AVDD: %d, DVDD: %d\n", + avdd, dvdd); + } +} + +/* + * AIC3X 2 wire address can be up to 4 devices with device addresses + * 0x18, 0x19, 0x1A, 0x1B + */ + +static const struct i2c_device_id aic3x_i2c_id[] = { + { "tlv320aic3x", AIC3X_MODEL_3X }, + { "tlv320aic33", AIC3X_MODEL_33 }, + { "tlv320aic3007", AIC3X_MODEL_3007 }, + { "tlv320aic3106", AIC3X_MODEL_3X }, + { "tlv320aic3104", AIC3X_MODEL_3104 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, aic3x_i2c_id); + +static const struct reg_sequence aic3007_class_d[] = { + /* Class-D speaker driver init; datasheet p. 46 */ + { AIC3X_PAGE_SELECT, 0x0D }, + { 0xD, 0x0D }, + { 0x8, 0x5C }, + { 0x8, 0x5D }, + { 0x8, 0x5C }, + { AIC3X_PAGE_SELECT, 0x00 }, +}; + +/* + * If the i2c layer weren't so broken, we could pass this kind of data + * around + */ +static int aic3x_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct aic3x_pdata *pdata = i2c->dev.platform_data; + struct aic3x_priv *aic3x; + struct aic3x_setup_data *ai3x_setup; + struct device_node *np = i2c->dev.of_node; + int ret, i; + u32 value; + + aic3x = devm_kzalloc(&i2c->dev, sizeof(struct aic3x_priv), GFP_KERNEL); + if (!aic3x) + return -ENOMEM; + + aic3x->regmap = devm_regmap_init_i2c(i2c, &aic3x_regmap); + if (IS_ERR(aic3x->regmap)) { + ret = PTR_ERR(aic3x->regmap); + return ret; + } + + regcache_cache_only(aic3x->regmap, true); + + i2c_set_clientdata(i2c, aic3x); + if (pdata) { + aic3x->gpio_reset = pdata->gpio_reset; + aic3x->setup = pdata->setup; + aic3x->micbias_vg = pdata->micbias_vg; + } else if (np) { + ai3x_setup = devm_kzalloc(&i2c->dev, sizeof(*ai3x_setup), + GFP_KERNEL); + if (!ai3x_setup) + return -ENOMEM; + + ret = of_get_named_gpio(np, "reset-gpios", 0); + if (ret >= 0) { + aic3x->gpio_reset = ret; + } else { + ret = of_get_named_gpio(np, "gpio-reset", 0); + if (ret > 0) { + dev_warn(&i2c->dev, "Using deprecated property \"gpio-reset\", please update your DT"); + aic3x->gpio_reset = ret; + } else { + aic3x->gpio_reset = -1; + } + } + + if (of_property_read_u32_array(np, "ai3x-gpio-func", + ai3x_setup->gpio_func, 2) >= 0) { + aic3x->setup = ai3x_setup; + } + + if (!of_property_read_u32(np, "ai3x-micbias-vg", &value)) { + switch (value) { + case 1 : + aic3x->micbias_vg = AIC3X_MICBIAS_2_0V; + break; + case 2 : + aic3x->micbias_vg = AIC3X_MICBIAS_2_5V; + break; + case 3 : + aic3x->micbias_vg = AIC3X_MICBIAS_AVDDV; + break; + default : + aic3x->micbias_vg = AIC3X_MICBIAS_OFF; + dev_err(&i2c->dev, "Unsuitable MicBias voltage " + "found in DT\n"); + } + } else { + aic3x->micbias_vg = AIC3X_MICBIAS_OFF; + } + + } else { + aic3x->gpio_reset = -1; + } + + aic3x->model = id->driver_data; + + if (gpio_is_valid(aic3x->gpio_reset) && + !aic3x_is_shared_reset(aic3x)) { + ret = gpio_request(aic3x->gpio_reset, "tlv320aic3x reset"); + if (ret != 0) + goto err; + gpio_direction_output(aic3x->gpio_reset, 0); + } + + for (i = 0; i < ARRAY_SIZE(aic3x->supplies); i++) + aic3x->supplies[i].supply = aic3x_supply_names[i]; + + ret = devm_regulator_bulk_get(&i2c->dev, ARRAY_SIZE(aic3x->supplies), + aic3x->supplies); + if (ret != 0) { + dev_err(&i2c->dev, "Failed to request supplies: %d\n", ret); + goto err_gpio; + } + + aic3x_configure_ocmv(i2c); + + if (aic3x->model == AIC3X_MODEL_3007) { + ret = regmap_register_patch(aic3x->regmap, aic3007_class_d, + ARRAY_SIZE(aic3007_class_d)); + if (ret != 0) + dev_err(&i2c->dev, "Failed to init class D: %d\n", + ret); + } + + ret = devm_snd_soc_register_component(&i2c->dev, + &soc_component_dev_aic3x, &aic3x_dai, 1); + + if (ret != 0) + goto err_gpio; + + INIT_LIST_HEAD(&aic3x->list); + list_add(&aic3x->list, &reset_list); + + return 0; + +err_gpio: + if (gpio_is_valid(aic3x->gpio_reset) && + !aic3x_is_shared_reset(aic3x)) + gpio_free(aic3x->gpio_reset); +err: + return ret; +} + +static int aic3x_i2c_remove(struct i2c_client *client) +{ + struct aic3x_priv *aic3x = i2c_get_clientdata(client); + + list_del(&aic3x->list); + + if (gpio_is_valid(aic3x->gpio_reset) && + !aic3x_is_shared_reset(aic3x)) { + gpio_set_value(aic3x->gpio_reset, 0); + gpio_free(aic3x->gpio_reset); + } + return 0; +} + +#if defined(CONFIG_OF) +static const struct of_device_id tlv320aic3x_of_match[] = { + { .compatible = "ti,tlv320aic3x", }, + { .compatible = "ti,tlv320aic33" }, + { .compatible = "ti,tlv320aic3007" }, + { .compatible = "ti,tlv320aic3106" }, + { .compatible = "ti,tlv320aic3104" }, + {}, +}; +MODULE_DEVICE_TABLE(of, tlv320aic3x_of_match); +#endif + +/* machine i2c codec control layer */ +static struct i2c_driver aic3x_i2c_driver = { + .driver = { + .name = "tlv320aic3x-codec", + .of_match_table = of_match_ptr(tlv320aic3x_of_match), + }, + .probe = aic3x_i2c_probe, + .remove = aic3x_i2c_remove, + .id_table = aic3x_i2c_id, +}; + +module_i2c_driver(aic3x_i2c_driver); + +MODULE_DESCRIPTION("ASoC TLV320AIC3X codec driver"); +MODULE_AUTHOR("Vladimir Barinov"); +MODULE_LICENSE("GPL"); |