summaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs/tlv320aic3x.h
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--sound/soc/codecs/tlv320aic3x.h288
1 files changed, 288 insertions, 0 deletions
diff --git a/sound/soc/codecs/tlv320aic3x.h b/sound/soc/codecs/tlv320aic3x.h
new file mode 100644
index 000000000..66d3580cf
--- /dev/null
+++ b/sound/soc/codecs/tlv320aic3x.h
@@ -0,0 +1,288 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * ALSA SoC TLV320AIC3X codec driver
+ *
+ * Author: Vladimir Barinov, <vbarinov@embeddedalley.com>
+ * Copyright: (C) 2007 MontaVista Software, Inc., <source@mvista.com>
+ */
+
+#ifndef _AIC3X_H
+#define _AIC3X_H
+
+/* AIC3X register space */
+#define AIC3X_CACHEREGNUM 110
+
+/* Page select register */
+#define AIC3X_PAGE_SELECT 0
+/* Software reset register */
+#define AIC3X_RESET 1
+/* Codec Sample rate select register */
+#define AIC3X_SAMPLE_RATE_SEL_REG 2
+/* PLL progrramming register A */
+#define AIC3X_PLL_PROGA_REG 3
+/* PLL progrramming register B */
+#define AIC3X_PLL_PROGB_REG 4
+/* PLL progrramming register C */
+#define AIC3X_PLL_PROGC_REG 5
+/* PLL progrramming register D */
+#define AIC3X_PLL_PROGD_REG 6
+/* Codec datapath setup register */
+#define AIC3X_CODEC_DATAPATH_REG 7
+/* Audio serial data interface control register A */
+#define AIC3X_ASD_INTF_CTRLA 8
+/* Audio serial data interface control register B */
+#define AIC3X_ASD_INTF_CTRLB 9
+/* Audio serial data interface control register C */
+#define AIC3X_ASD_INTF_CTRLC 10
+/* Audio overflow status and PLL R value programming register */
+#define AIC3X_OVRF_STATUS_AND_PLLR_REG 11
+/* Audio codec digital filter control register */
+#define AIC3X_CODEC_DFILT_CTRL 12
+/* Headset/button press detection register */
+#define AIC3X_HEADSET_DETECT_CTRL_A 13
+#define AIC3X_HEADSET_DETECT_CTRL_B 14
+/* ADC PGA Gain control registers */
+#define LADC_VOL 15
+#define RADC_VOL 16
+/* MIC3 control registers */
+#define MIC3LR_2_LADC_CTRL 17
+#define MIC3LR_2_RADC_CTRL 18
+/* Line1 Input control registers */
+#define LINE1L_2_LADC_CTRL 19
+#define LINE1R_2_LADC_CTRL 21
+#define LINE1R_2_RADC_CTRL 22
+#define LINE1L_2_RADC_CTRL 24
+/* Line2 Input control registers */
+#define LINE2L_2_LADC_CTRL 20
+#define LINE2R_2_RADC_CTRL 23
+/* MICBIAS Control Register */
+#define MICBIAS_CTRL 25
+
+/* AGC Control Registers A, B, C */
+#define LAGC_CTRL_A 26
+#define LAGC_CTRL_B 27
+#define LAGC_CTRL_C 28
+#define RAGC_CTRL_A 29
+#define RAGC_CTRL_B 30
+#define RAGC_CTRL_C 31
+
+/* DAC Power and Left High Power Output control registers */
+#define DAC_PWR 37
+#define HPLCOM_CFG 37
+/* Right High Power Output control registers */
+#define HPRCOM_CFG 38
+/* High Power Output Stage Control Register */
+#define HPOUT_SC 40
+/* DAC Output Switching control registers */
+#define DAC_LINE_MUX 41
+/* High Power Output Driver Pop Reduction registers */
+#define HPOUT_POP_REDUCTION 42
+/* DAC Digital control registers */
+#define LDAC_VOL 43
+#define RDAC_VOL 44
+/* Left High Power Output control registers */
+#define LINE2L_2_HPLOUT_VOL 45
+#define PGAL_2_HPLOUT_VOL 46
+#define DACL1_2_HPLOUT_VOL 47
+#define LINE2R_2_HPLOUT_VOL 48
+#define PGAR_2_HPLOUT_VOL 49
+#define DACR1_2_HPLOUT_VOL 50
+#define HPLOUT_CTRL 51
+/* Left High Power COM control registers */
+#define LINE2L_2_HPLCOM_VOL 52
+#define PGAL_2_HPLCOM_VOL 53
+#define DACL1_2_HPLCOM_VOL 54
+#define LINE2R_2_HPLCOM_VOL 55
+#define PGAR_2_HPLCOM_VOL 56
+#define DACR1_2_HPLCOM_VOL 57
+#define HPLCOM_CTRL 58
+/* Right High Power Output control registers */
+#define LINE2L_2_HPROUT_VOL 59
+#define PGAL_2_HPROUT_VOL 60
+#define DACL1_2_HPROUT_VOL 61
+#define LINE2R_2_HPROUT_VOL 62
+#define PGAR_2_HPROUT_VOL 63
+#define DACR1_2_HPROUT_VOL 64
+#define HPROUT_CTRL 65
+/* Right High Power COM control registers */
+#define LINE2L_2_HPRCOM_VOL 66
+#define PGAL_2_HPRCOM_VOL 67
+#define DACL1_2_HPRCOM_VOL 68
+#define LINE2R_2_HPRCOM_VOL 69
+#define PGAR_2_HPRCOM_VOL 70
+#define DACR1_2_HPRCOM_VOL 71
+#define HPRCOM_CTRL 72
+/* Mono Line Output Plus/Minus control registers */
+#define LINE2L_2_MONOLOPM_VOL 73
+#define PGAL_2_MONOLOPM_VOL 74
+#define DACL1_2_MONOLOPM_VOL 75
+#define LINE2R_2_MONOLOPM_VOL 76
+#define PGAR_2_MONOLOPM_VOL 77
+#define DACR1_2_MONOLOPM_VOL 78
+#define MONOLOPM_CTRL 79
+/* Class-D speaker driver on tlv320aic3007 */
+#define CLASSD_CTRL 73
+/* Left Line Output Plus/Minus control registers */
+#define LINE2L_2_LLOPM_VOL 80
+#define PGAL_2_LLOPM_VOL 81
+#define DACL1_2_LLOPM_VOL 82
+#define LINE2R_2_LLOPM_VOL 83
+#define PGAR_2_LLOPM_VOL 84
+#define DACR1_2_LLOPM_VOL 85
+#define LLOPM_CTRL 86
+/* Right Line Output Plus/Minus control registers */
+#define LINE2L_2_RLOPM_VOL 87
+#define PGAL_2_RLOPM_VOL 88
+#define DACL1_2_RLOPM_VOL 89
+#define LINE2R_2_RLOPM_VOL 90
+#define PGAR_2_RLOPM_VOL 91
+#define DACR1_2_RLOPM_VOL 92
+#define RLOPM_CTRL 93
+/* GPIO/IRQ registers */
+#define AIC3X_STICKY_IRQ_FLAGS_REG 96
+#define AIC3X_RT_IRQ_FLAGS_REG 97
+#define AIC3X_GPIO1_REG 98
+#define AIC3X_GPIO2_REG 99
+#define AIC3X_GPIOA_REG 100
+#define AIC3X_GPIOB_REG 101
+/* Clock generation control register */
+#define AIC3X_CLKGEN_CTRL_REG 102
+/* New AGC registers */
+#define LAGCN_ATTACK 103
+#define LAGCN_DECAY 104
+#define RAGCN_ATTACK 105
+#define RAGCN_DECAY 106
+/* New Programmable ADC Digital Path and I2C Bus Condition Register */
+#define NEW_ADC_DIGITALPATH 107
+/* Passive Analog Signal Bypass Selection During Powerdown Register */
+#define PASSIVE_BYPASS 108
+/* DAC Quiescent Current Adjustment Register */
+#define DAC_ICC_ADJ 109
+
+/* Page select register bits */
+#define PAGE0_SELECT 0
+#define PAGE1_SELECT 1
+
+/* Audio serial data interface control register A bits */
+#define BIT_CLK_MASTER 0x80
+#define WORD_CLK_MASTER 0x40
+#define DOUT_TRISTATE 0x20
+
+/* Codec Datapath setup register 7 */
+#define FSREF_44100 (1 << 7)
+#define FSREF_48000 (0 << 7)
+#define DUAL_RATE_MODE ((1 << 5) | (1 << 6))
+#define LDAC2LCH (0x1 << 3)
+#define RDAC2RCH (0x1 << 1)
+#define LDAC2RCH (0x2 << 3)
+#define RDAC2LCH (0x2 << 1)
+#define LDAC2MONOMIX (0x3 << 3)
+#define RDAC2MONOMIX (0x3 << 1)
+
+/* PLL registers bitfields */
+#define PLLP_SHIFT 0
+#define PLLP_MASK 7
+#define PLLQ_SHIFT 3
+#define PLLR_SHIFT 0
+#define PLLJ_SHIFT 2
+#define PLLD_MSB_SHIFT 0
+#define PLLD_LSB_SHIFT 2
+
+/* Clock generation register bits */
+#define CODEC_CLKIN_PLLDIV 0
+#define CODEC_CLKIN_CLKDIV 1
+#define PLL_CLKIN_SHIFT 4
+#define MCLK_SOURCE 0x0
+#define PLL_CLKDIV_SHIFT 0
+#define PLLCLK_IN_MASK 0x30
+#define PLLCLK_IN_SHIFT 4
+#define CLKDIV_IN_MASK 0xc0
+#define CLKDIV_IN_SHIFT 6
+/* clock in source */
+#define CLKIN_MCLK 0
+#define CLKIN_GPIO2 1
+#define CLKIN_BCLK 2
+
+/* Software reset register bits */
+#define SOFT_RESET 0x80
+
+/* PLL progrramming register A bits */
+#define PLL_ENABLE 0x80
+
+/* Route bits */
+#define ROUTE_ON 0x80
+
+/* Mute bits */
+#define UNMUTE 0x08
+#define MUTE_ON 0x80
+
+/* Power bits */
+#define LADC_PWR_ON 0x04
+#define RADC_PWR_ON 0x04
+#define LDAC_PWR_ON 0x80
+#define RDAC_PWR_ON 0x40
+#define HPLOUT_PWR_ON 0x01
+#define HPROUT_PWR_ON 0x01
+#define HPLCOM_PWR_ON 0x01
+#define HPRCOM_PWR_ON 0x01
+#define MONOLOPM_PWR_ON 0x01
+#define LLOPM_PWR_ON 0x01
+#define RLOPM_PWR_ON 0x01
+
+#define INVERT_VOL(val) (0x7f - val)
+
+/* Default output volume (inverted) */
+#define DEFAULT_VOL INVERT_VOL(0x50)
+/* Default input volume */
+#define DEFAULT_GAIN 0x20
+
+/* MICBIAS Control Register */
+#define MICBIAS_LEVEL_SHIFT (6)
+#define MICBIAS_LEVEL_MASK (3 << 6)
+
+/* HPOUT_SC */
+#define HPOUT_SC_OCMV_MASK (3 << 6)
+#define HPOUT_SC_OCMV_SHIFT (6)
+#define HPOUT_SC_OCMV_1_35V 0
+#define HPOUT_SC_OCMV_1_5V 1
+#define HPOUT_SC_OCMV_1_65V 2
+#define HPOUT_SC_OCMV_1_8V 3
+
+/* headset detection / button API */
+
+/* The AIC3x supports detection of stereo headsets (GND + left + right signal)
+ * and cellular headsets (GND + speaker output + microphone input).
+ * It is recommended to enable MIC bias for this function to work properly.
+ * For more information, please refer to the datasheet. */
+enum {
+ AIC3X_HEADSET_DETECT_OFF = 0,
+ AIC3X_HEADSET_DETECT_STEREO = 1,
+ AIC3X_HEADSET_DETECT_CELLULAR = 2,
+ AIC3X_HEADSET_DETECT_BOTH = 3
+};
+
+enum {
+ AIC3X_HEADSET_DEBOUNCE_16MS = 0,
+ AIC3X_HEADSET_DEBOUNCE_32MS = 1,
+ AIC3X_HEADSET_DEBOUNCE_64MS = 2,
+ AIC3X_HEADSET_DEBOUNCE_128MS = 3,
+ AIC3X_HEADSET_DEBOUNCE_256MS = 4,
+ AIC3X_HEADSET_DEBOUNCE_512MS = 5
+};
+
+enum {
+ AIC3X_BUTTON_DEBOUNCE_0MS = 0,
+ AIC3X_BUTTON_DEBOUNCE_8MS = 1,
+ AIC3X_BUTTON_DEBOUNCE_16MS = 2,
+ AIC3X_BUTTON_DEBOUNCE_32MS = 3
+};
+
+#define AIC3X_HEADSET_DETECT_ENABLED 0x80
+#define AIC3X_HEADSET_DETECT_SHIFT 5
+#define AIC3X_HEADSET_DETECT_MASK 3
+#define AIC3X_HEADSET_DEBOUNCE_SHIFT 2
+#define AIC3X_HEADSET_DEBOUNCE_MASK 7
+#define AIC3X_BUTTON_DEBOUNCE_SHIFT 0
+#define AIC3X_BUTTON_DEBOUNCE_MASK 3
+
+#endif /* _AIC3X_H */