diff options
Diffstat (limited to '')
| -rw-r--r-- | sound/soc/mxs/Kconfig | 22 | ||||
| -rw-r--r-- | sound/soc/mxs/Makefile | 11 | ||||
| -rw-r--r-- | sound/soc/mxs/mxs-pcm.c | 46 | ||||
| -rw-r--r-- | sound/soc/mxs/mxs-pcm.h | 11 | ||||
| -rw-r--r-- | sound/soc/mxs/mxs-saif.c | 850 | ||||
| -rw-r--r-- | sound/soc/mxs/mxs-saif.h | 123 | ||||
| -rw-r--r-- | sound/soc/mxs/mxs-sgtl5000.c | 203 |
7 files changed, 1266 insertions, 0 deletions
diff --git a/sound/soc/mxs/Kconfig b/sound/soc/mxs/Kconfig new file mode 100644 index 000000000..402ef1ee7 --- /dev/null +++ b/sound/soc/mxs/Kconfig @@ -0,0 +1,22 @@ +# SPDX-License-Identifier: GPL-2.0-only +menuconfig SND_MXS_SOC + tristate "SoC Audio for Freescale MXS CPUs" + depends on ARCH_MXS || COMPILE_TEST + depends on COMMON_CLK + select SND_SOC_GENERIC_DMAENGINE_PCM + help + Say Y or M if you want to add support for codecs attached to + the MXS SAIF interface. + + +if SND_MXS_SOC + +config SND_SOC_MXS_SGTL5000 + tristate "SoC Audio support for MXS boards with sgtl5000" + depends on I2C + select SND_SOC_SGTL5000 + help + Say Y if you want to add support for SoC audio on an MXS board with + a sgtl5000 codec. + +endif # SND_MXS_SOC diff --git a/sound/soc/mxs/Makefile b/sound/soc/mxs/Makefile new file mode 100644 index 000000000..ab0a9a553 --- /dev/null +++ b/sound/soc/mxs/Makefile @@ -0,0 +1,11 @@ +# SPDX-License-Identifier: GPL-2.0 +# MXS Platform Support +snd-soc-mxs-objs := mxs-saif.o +snd-soc-mxs-pcm-objs := mxs-pcm.o + +obj-$(CONFIG_SND_MXS_SOC) += snd-soc-mxs.o snd-soc-mxs-pcm.o + +# i.MX Machine Support +snd-soc-mxs-sgtl5000-objs := mxs-sgtl5000.o + +obj-$(CONFIG_SND_SOC_MXS_SGTL5000) += snd-soc-mxs-sgtl5000.o diff --git a/sound/soc/mxs/mxs-pcm.c b/sound/soc/mxs/mxs-pcm.c new file mode 100644 index 000000000..df2e4be99 --- /dev/null +++ b/sound/soc/mxs/mxs-pcm.c @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * + * Based on sound/soc/imx/imx-pcm-dma-mx2.c + */ + +#include <linux/device.h> +#include <linux/init.h> +#include <linux/module.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/soc.h> +#include <sound/dmaengine_pcm.h> + +#include "mxs-pcm.h" + +static const struct snd_pcm_hardware snd_mxs_hardware = { + .info = SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_PAUSE | + SNDRV_PCM_INFO_RESUME | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_HALF_DUPLEX, + .period_bytes_min = 32, + .period_bytes_max = 8192, + .periods_min = 1, + .periods_max = 52, + .buffer_bytes_max = 64 * 1024, + .fifo_size = 32, +}; + +static const struct snd_dmaengine_pcm_config mxs_dmaengine_pcm_config = { + .pcm_hardware = &snd_mxs_hardware, + .prealloc_buffer_size = 64 * 1024, +}; + +int mxs_pcm_platform_register(struct device *dev) +{ + return devm_snd_dmaengine_pcm_register(dev, &mxs_dmaengine_pcm_config, + SND_DMAENGINE_PCM_FLAG_HALF_DUPLEX); +} +EXPORT_SYMBOL_GPL(mxs_pcm_platform_register); + +MODULE_LICENSE("GPL"); diff --git a/sound/soc/mxs/mxs-pcm.h b/sound/soc/mxs/mxs-pcm.h new file mode 100644 index 000000000..4f9c419f3 --- /dev/null +++ b/sound/soc/mxs/mxs-pcm.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +#ifndef _MXS_PCM_H +#define _MXS_PCM_H + +int mxs_pcm_platform_register(struct device *dev); + +#endif diff --git a/sound/soc/mxs/mxs-saif.c b/sound/soc/mxs/mxs-saif.c new file mode 100644 index 000000000..d87ac2699 --- /dev/null +++ b/sound/soc/mxs/mxs-saif.c @@ -0,0 +1,850 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2011 Freescale Semiconductor, Inc. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/dma-mapping.h> +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/time.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> + +#include "mxs-saif.h" + +#define MXS_SET_ADDR 0x4 +#define MXS_CLR_ADDR 0x8 + +static struct mxs_saif *mxs_saif[2]; + +/* + * SAIF is a little different with other normal SOC DAIs on clock using. + * + * For MXS, two SAIF modules are instantiated on-chip. + * Each SAIF has a set of clock pins and can be operating in master + * mode simultaneously if they are connected to different off-chip codecs. + * Also, one of the two SAIFs can master or drive the clock pins while the + * other SAIF, in slave mode, receives clocking from the master SAIF. + * This also means that both SAIFs must operate at the same sample rate. + * + * We abstract this as each saif has a master, the master could be + * itself or other saifs. In the generic saif driver, saif does not need + * to know the different clkmux. Saif only needs to know who is its master + * and operating its master to generate the proper clock rate for it. + * The master id is provided in mach-specific layer according to different + * clkmux setting. + */ + +static int mxs_saif_set_dai_sysclk(struct snd_soc_dai *cpu_dai, + int clk_id, unsigned int freq, int dir) +{ + struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai); + + switch (clk_id) { + case MXS_SAIF_MCLK: + saif->mclk = freq; + break; + default: + return -EINVAL; + } + return 0; +} + +/* + * Since SAIF may work on EXTMASTER mode, IOW, it's working BITCLK&LRCLK + * is provided by other SAIF, we provide a interface here to get its master + * from its master_id. + * Note that the master could be itself. + */ +static inline struct mxs_saif *mxs_saif_get_master(struct mxs_saif * saif) +{ + return mxs_saif[saif->master_id]; +} + +/* + * Set SAIF clock and MCLK + */ +static int mxs_saif_set_clk(struct mxs_saif *saif, + unsigned int mclk, + unsigned int rate) +{ + u32 scr; + int ret; + struct mxs_saif *master_saif; + + dev_dbg(saif->dev, "mclk %d rate %d\n", mclk, rate); + + /* Set master saif to generate proper clock */ + master_saif = mxs_saif_get_master(saif); + if (!master_saif) + return -EINVAL; + + dev_dbg(saif->dev, "master saif%d\n", master_saif->id); + + /* Checking if can playback and capture simutaneously */ + if (master_saif->ongoing && rate != master_saif->cur_rate) { + dev_err(saif->dev, + "can not change clock, master saif%d(rate %d) is ongoing\n", + master_saif->id, master_saif->cur_rate); + return -EINVAL; + } + + scr = __raw_readl(master_saif->base + SAIF_CTRL); + scr &= ~BM_SAIF_CTRL_BITCLK_MULT_RATE; + scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE; + + /* + * Set SAIF clock + * + * The SAIF clock should be either 384*fs or 512*fs. + * If MCLK is used, the SAIF clk ratio needs to match mclk ratio. + * For 256x, 128x, 64x, and 32x sub-rates, set saif clk as 512*fs. + * For 192x, 96x, and 48x sub-rates, set saif clk as 384*fs. + * + * If MCLK is not used, we just set saif clk to 512*fs. + */ + ret = clk_prepare_enable(master_saif->clk); + if (ret) + return ret; + + if (master_saif->mclk_in_use) { + switch (mclk / rate) { + case 32: + case 64: + case 128: + case 256: + case 512: + scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE; + ret = clk_set_rate(master_saif->clk, 512 * rate); + break; + case 48: + case 96: + case 192: + case 384: + scr |= BM_SAIF_CTRL_BITCLK_BASE_RATE; + ret = clk_set_rate(master_saif->clk, 384 * rate); + break; + default: + /* SAIF MCLK should be a sub-rate of 512x or 384x */ + clk_disable_unprepare(master_saif->clk); + return -EINVAL; + } + } else { + ret = clk_set_rate(master_saif->clk, 512 * rate); + scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE; + } + + clk_disable_unprepare(master_saif->clk); + + if (ret) + return ret; + + master_saif->cur_rate = rate; + + if (!master_saif->mclk_in_use) { + __raw_writel(scr, master_saif->base + SAIF_CTRL); + return 0; + } + + /* + * Program the over-sample rate for MCLK output + * + * The available MCLK range is 32x, 48x... 512x. The rate + * could be from 8kHz to 192kH. + */ + switch (mclk / rate) { + case 32: + scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(4); + break; + case 64: + scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(3); + break; + case 128: + scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(2); + break; + case 256: + scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(1); + break; + case 512: + scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(0); + break; + case 48: + scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(3); + break; + case 96: + scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(2); + break; + case 192: + scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(1); + break; + case 384: + scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(0); + break; + default: + return -EINVAL; + } + + __raw_writel(scr, master_saif->base + SAIF_CTRL); + + return 0; +} + +/* + * Put and disable MCLK. + */ +int mxs_saif_put_mclk(unsigned int saif_id) +{ + struct mxs_saif *saif = mxs_saif[saif_id]; + u32 stat; + + if (!saif) + return -EINVAL; + + stat = __raw_readl(saif->base + SAIF_STAT); + if (stat & BM_SAIF_STAT_BUSY) { + dev_err(saif->dev, "error: busy\n"); + return -EBUSY; + } + + clk_disable_unprepare(saif->clk); + + /* disable MCLK output */ + __raw_writel(BM_SAIF_CTRL_CLKGATE, + saif->base + SAIF_CTRL + MXS_SET_ADDR); + __raw_writel(BM_SAIF_CTRL_RUN, + saif->base + SAIF_CTRL + MXS_CLR_ADDR); + + saif->mclk_in_use = 0; + return 0; +} +EXPORT_SYMBOL_GPL(mxs_saif_put_mclk); + +/* + * Get MCLK and set clock rate, then enable it + * + * This interface is used for codecs who are using MCLK provided + * by saif. + */ +int mxs_saif_get_mclk(unsigned int saif_id, unsigned int mclk, + unsigned int rate) +{ + struct mxs_saif *saif = mxs_saif[saif_id]; + u32 stat; + int ret; + struct mxs_saif *master_saif; + + if (!saif) + return -EINVAL; + + /* Clear Reset */ + __raw_writel(BM_SAIF_CTRL_SFTRST, + saif->base + SAIF_CTRL + MXS_CLR_ADDR); + + /* FIXME: need clear clk gate for register r/w */ + __raw_writel(BM_SAIF_CTRL_CLKGATE, + saif->base + SAIF_CTRL + MXS_CLR_ADDR); + + master_saif = mxs_saif_get_master(saif); + if (saif != master_saif) { + dev_err(saif->dev, "can not get mclk from a non-master saif\n"); + return -EINVAL; + } + + stat = __raw_readl(saif->base + SAIF_STAT); + if (stat & BM_SAIF_STAT_BUSY) { + dev_err(saif->dev, "error: busy\n"); + return -EBUSY; + } + + saif->mclk_in_use = 1; + ret = mxs_saif_set_clk(saif, mclk, rate); + if (ret) + return ret; + + ret = clk_prepare_enable(saif->clk); + if (ret) + return ret; + + /* enable MCLK output */ + __raw_writel(BM_SAIF_CTRL_RUN, + saif->base + SAIF_CTRL + MXS_SET_ADDR); + + return 0; +} +EXPORT_SYMBOL_GPL(mxs_saif_get_mclk); + +/* + * SAIF DAI format configuration. + * Should only be called when port is inactive. + */ +static int mxs_saif_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt) +{ + u32 scr, stat; + u32 scr0; + struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai); + + stat = __raw_readl(saif->base + SAIF_STAT); + if (stat & BM_SAIF_STAT_BUSY) { + dev_err(cpu_dai->dev, "error: busy\n"); + return -EBUSY; + } + + /* If SAIF1 is configured as slave, the clk gate needs to be cleared + * before the register can be written. + */ + if (saif->id != saif->master_id) { + __raw_writel(BM_SAIF_CTRL_SFTRST, + saif->base + SAIF_CTRL + MXS_CLR_ADDR); + __raw_writel(BM_SAIF_CTRL_CLKGATE, + saif->base + SAIF_CTRL + MXS_CLR_ADDR); + } + + scr0 = __raw_readl(saif->base + SAIF_CTRL); + scr0 = scr0 & ~BM_SAIF_CTRL_BITCLK_EDGE & ~BM_SAIF_CTRL_LRCLK_POLARITY \ + & ~BM_SAIF_CTRL_JUSTIFY & ~BM_SAIF_CTRL_DELAY; + scr = 0; + + /* DAI mode */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + /* data frame low 1clk before data */ + scr |= BM_SAIF_CTRL_DELAY; + scr &= ~BM_SAIF_CTRL_LRCLK_POLARITY; + break; + case SND_SOC_DAIFMT_LEFT_J: + /* data frame high with data */ + scr &= ~BM_SAIF_CTRL_DELAY; + scr &= ~BM_SAIF_CTRL_LRCLK_POLARITY; + scr &= ~BM_SAIF_CTRL_JUSTIFY; + break; + default: + return -EINVAL; + } + + /* DAI clock inversion */ + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_IB_IF: + scr |= BM_SAIF_CTRL_BITCLK_EDGE; + scr |= BM_SAIF_CTRL_LRCLK_POLARITY; + break; + case SND_SOC_DAIFMT_IB_NF: + scr |= BM_SAIF_CTRL_BITCLK_EDGE; + scr &= ~BM_SAIF_CTRL_LRCLK_POLARITY; + break; + case SND_SOC_DAIFMT_NB_IF: + scr &= ~BM_SAIF_CTRL_BITCLK_EDGE; + scr |= BM_SAIF_CTRL_LRCLK_POLARITY; + break; + case SND_SOC_DAIFMT_NB_NF: + scr &= ~BM_SAIF_CTRL_BITCLK_EDGE; + scr &= ~BM_SAIF_CTRL_LRCLK_POLARITY; + break; + } + + /* + * Note: We simply just support master mode since SAIF TX can only + * work as master. + * Here the master is relative to codec side. + * Saif internally could be slave when working on EXTMASTER mode. + * We just hide this to machine driver. + */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + if (saif->id == saif->master_id) + scr &= ~BM_SAIF_CTRL_SLAVE_MODE; + else + scr |= BM_SAIF_CTRL_SLAVE_MODE; + + __raw_writel(scr | scr0, saif->base + SAIF_CTRL); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int mxs_saif_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *cpu_dai) +{ + struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai); + int ret; + + /* clear error status to 0 for each re-open */ + saif->fifo_underrun = 0; + saif->fifo_overrun = 0; + + /* Clear Reset for normal operations */ + __raw_writel(BM_SAIF_CTRL_SFTRST, + saif->base + SAIF_CTRL + MXS_CLR_ADDR); + + /* clear clock gate */ + __raw_writel(BM_SAIF_CTRL_CLKGATE, + saif->base + SAIF_CTRL + MXS_CLR_ADDR); + + ret = clk_prepare(saif->clk); + if (ret) + return ret; + + return 0; +} + +static void mxs_saif_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *cpu_dai) +{ + struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai); + + clk_unprepare(saif->clk); +} + +/* + * Should only be called when port is inactive. + * although can be called multiple times by upper layers. + */ +static int mxs_saif_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *cpu_dai) +{ + struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai); + struct mxs_saif *master_saif; + u32 scr, stat; + int ret; + + master_saif = mxs_saif_get_master(saif); + if (!master_saif) + return -EINVAL; + + /* mclk should already be set */ + if (!saif->mclk && saif->mclk_in_use) { + dev_err(cpu_dai->dev, "set mclk first\n"); + return -EINVAL; + } + + stat = __raw_readl(saif->base + SAIF_STAT); + if (!saif->mclk_in_use && (stat & BM_SAIF_STAT_BUSY)) { + dev_err(cpu_dai->dev, "error: busy\n"); + return -EBUSY; + } + + /* + * Set saif clk based on sample rate. + * If mclk is used, we also set mclk, if not, saif->mclk is + * default 0, means not used. + */ + ret = mxs_saif_set_clk(saif, saif->mclk, params_rate(params)); + if (ret) { + dev_err(cpu_dai->dev, "unable to get proper clk\n"); + return ret; + } + + if (saif != master_saif) { + /* + * Set an initial clock rate for the saif internal logic to work + * properly. This is important when working in EXTMASTER mode + * that uses the other saif's BITCLK&LRCLK but it still needs a + * basic clock which should be fast enough for the internal + * logic. + */ + ret = clk_enable(saif->clk); + if (ret) + return ret; + + ret = clk_set_rate(saif->clk, 24000000); + clk_disable(saif->clk); + if (ret) + return ret; + + ret = clk_prepare(master_saif->clk); + if (ret) + return ret; + } + + scr = __raw_readl(saif->base + SAIF_CTRL); + + scr &= ~BM_SAIF_CTRL_WORD_LENGTH; + scr &= ~BM_SAIF_CTRL_BITCLK_48XFS_ENABLE; + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + scr |= BF_SAIF_CTRL_WORD_LENGTH(0); + break; + case SNDRV_PCM_FORMAT_S20_3LE: + scr |= BF_SAIF_CTRL_WORD_LENGTH(4); + scr |= BM_SAIF_CTRL_BITCLK_48XFS_ENABLE; + break; + case SNDRV_PCM_FORMAT_S24_LE: + scr |= BF_SAIF_CTRL_WORD_LENGTH(8); + scr |= BM_SAIF_CTRL_BITCLK_48XFS_ENABLE; + break; + default: + return -EINVAL; + } + + /* Tx/Rx config */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + /* enable TX mode */ + scr &= ~BM_SAIF_CTRL_READ_MODE; + } else { + /* enable RX mode */ + scr |= BM_SAIF_CTRL_READ_MODE; + } + + __raw_writel(scr, saif->base + SAIF_CTRL); + return 0; +} + +static int mxs_saif_prepare(struct snd_pcm_substream *substream, + struct snd_soc_dai *cpu_dai) +{ + struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai); + + /* enable FIFO error irqs */ + __raw_writel(BM_SAIF_CTRL_FIFO_ERROR_IRQ_EN, + saif->base + SAIF_CTRL + MXS_SET_ADDR); + + return 0; +} + +static int mxs_saif_trigger(struct snd_pcm_substream *substream, int cmd, + struct snd_soc_dai *cpu_dai) +{ + struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai); + struct mxs_saif *master_saif; + u32 delay; + int ret; + + master_saif = mxs_saif_get_master(saif); + if (!master_saif) + return -EINVAL; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + if (saif->state == MXS_SAIF_STATE_RUNNING) + return 0; + + dev_dbg(cpu_dai->dev, "start\n"); + + ret = clk_enable(master_saif->clk); + if (ret) { + dev_err(saif->dev, "Failed to enable master clock\n"); + return ret; + } + + /* + * If the saif's master is not itself, we also need to enable + * itself clk for its internal basic logic to work. + */ + if (saif != master_saif) { + ret = clk_enable(saif->clk); + if (ret) { + dev_err(saif->dev, "Failed to enable master clock\n"); + clk_disable(master_saif->clk); + return ret; + } + + __raw_writel(BM_SAIF_CTRL_RUN, + saif->base + SAIF_CTRL + MXS_SET_ADDR); + } + + if (!master_saif->mclk_in_use) + __raw_writel(BM_SAIF_CTRL_RUN, + master_saif->base + SAIF_CTRL + MXS_SET_ADDR); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + /* + * write data to saif data register to trigger + * the transfer. + * For 24-bit format the 32-bit FIFO register stores + * only one channel, so we need to write twice. + * This is also safe for the other non 24-bit formats. + */ + __raw_writel(0, saif->base + SAIF_DATA); + __raw_writel(0, saif->base + SAIF_DATA); + } else { + /* + * read data from saif data register to trigger + * the receive. + * For 24-bit format the 32-bit FIFO register stores + * only one channel, so we need to read twice. + * This is also safe for the other non 24-bit formats. + */ + __raw_readl(saif->base + SAIF_DATA); + __raw_readl(saif->base + SAIF_DATA); + } + + master_saif->ongoing = 1; + saif->state = MXS_SAIF_STATE_RUNNING; + + dev_dbg(saif->dev, "CTRL 0x%x STAT 0x%x\n", + __raw_readl(saif->base + SAIF_CTRL), + __raw_readl(saif->base + SAIF_STAT)); + + dev_dbg(master_saif->dev, "CTRL 0x%x STAT 0x%x\n", + __raw_readl(master_saif->base + SAIF_CTRL), + __raw_readl(master_saif->base + SAIF_STAT)); + break; + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + if (saif->state == MXS_SAIF_STATE_STOPPED) + return 0; + + dev_dbg(cpu_dai->dev, "stop\n"); + + /* wait a while for the current sample to complete */ + delay = USEC_PER_SEC / master_saif->cur_rate; + + if (!master_saif->mclk_in_use) { + __raw_writel(BM_SAIF_CTRL_RUN, + master_saif->base + SAIF_CTRL + MXS_CLR_ADDR); + udelay(delay); + } + clk_disable(master_saif->clk); + + if (saif != master_saif) { + __raw_writel(BM_SAIF_CTRL_RUN, + saif->base + SAIF_CTRL + MXS_CLR_ADDR); + udelay(delay); + clk_disable(saif->clk); + } + + master_saif->ongoing = 0; + saif->state = MXS_SAIF_STATE_STOPPED; + + break; + default: + return -EINVAL; + } + + return 0; +} + +#define MXS_SAIF_RATES SNDRV_PCM_RATE_8000_192000 +#define MXS_SAIF_FORMATS \ + (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ + SNDRV_PCM_FMTBIT_S24_LE) + +static const struct snd_soc_dai_ops mxs_saif_dai_ops = { + .startup = mxs_saif_startup, + .shutdown = mxs_saif_shutdown, + .trigger = mxs_saif_trigger, + .prepare = mxs_saif_prepare, + .hw_params = mxs_saif_hw_params, + .set_sysclk = mxs_saif_set_dai_sysclk, + .set_fmt = mxs_saif_set_dai_fmt, +}; + +static int mxs_saif_dai_probe(struct snd_soc_dai *dai) +{ + struct mxs_saif *saif = dev_get_drvdata(dai->dev); + + snd_soc_dai_set_drvdata(dai, saif); + + return 0; +} + +static struct snd_soc_dai_driver mxs_saif_dai = { + .name = "mxs-saif", + .probe = mxs_saif_dai_probe, + .playback = { + .channels_min = 2, + .channels_max = 2, + .rates = MXS_SAIF_RATES, + .formats = MXS_SAIF_FORMATS, + }, + .capture = { + .channels_min = 2, + .channels_max = 2, + .rates = MXS_SAIF_RATES, + .formats = MXS_SAIF_FORMATS, + }, + .ops = &mxs_saif_dai_ops, +}; + +static const struct snd_soc_component_driver mxs_saif_component = { + .name = "mxs-saif", +}; + +static irqreturn_t mxs_saif_irq(int irq, void *dev_id) +{ + struct mxs_saif *saif = dev_id; + unsigned int stat; + + stat = __raw_readl(saif->base + SAIF_STAT); + if (!(stat & (BM_SAIF_STAT_FIFO_UNDERFLOW_IRQ | + BM_SAIF_STAT_FIFO_OVERFLOW_IRQ))) + return IRQ_NONE; + + if (stat & BM_SAIF_STAT_FIFO_UNDERFLOW_IRQ) { + dev_dbg(saif->dev, "underrun!!! %d\n", ++saif->fifo_underrun); + __raw_writel(BM_SAIF_STAT_FIFO_UNDERFLOW_IRQ, + saif->base + SAIF_STAT + MXS_CLR_ADDR); + } + + if (stat & BM_SAIF_STAT_FIFO_OVERFLOW_IRQ) { + dev_dbg(saif->dev, "overrun!!! %d\n", ++saif->fifo_overrun); + __raw_writel(BM_SAIF_STAT_FIFO_OVERFLOW_IRQ, + saif->base + SAIF_STAT + MXS_CLR_ADDR); + } + + dev_dbg(saif->dev, "SAIF_CTRL %x SAIF_STAT %x\n", + __raw_readl(saif->base + SAIF_CTRL), + __raw_readl(saif->base + SAIF_STAT)); + + return IRQ_HANDLED; +} + +static int mxs_saif_mclk_init(struct platform_device *pdev) +{ + struct mxs_saif *saif = platform_get_drvdata(pdev); + struct device_node *np = pdev->dev.of_node; + struct clk *clk; + int ret; + + clk = clk_register_divider(&pdev->dev, "mxs_saif_mclk", + __clk_get_name(saif->clk), 0, + saif->base + SAIF_CTRL, + BP_SAIF_CTRL_BITCLK_MULT_RATE, 3, + 0, NULL); + if (IS_ERR(clk)) { + ret = PTR_ERR(clk); + if (ret == -EEXIST) + return 0; + dev_err(&pdev->dev, "failed to register mclk: %d\n", ret); + return PTR_ERR(clk); + } + + ret = of_clk_add_provider(np, of_clk_src_simple_get, clk); + if (ret) + return ret; + + return 0; +} + +static int mxs_saif_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct mxs_saif *saif; + int irq, ret; + struct device_node *master; + + saif = devm_kzalloc(&pdev->dev, sizeof(*saif), GFP_KERNEL); + if (!saif) + return -ENOMEM; + + ret = of_alias_get_id(np, "saif"); + if (ret < 0) + return ret; + else + saif->id = ret; + + if (saif->id >= ARRAY_SIZE(mxs_saif)) { + dev_err(&pdev->dev, "get wrong saif id\n"); + return -EINVAL; + } + + /* + * If there is no "fsl,saif-master" phandle, it's a saif + * master. Otherwise, it's a slave and its phandle points + * to the master. + */ + master = of_parse_phandle(np, "fsl,saif-master", 0); + if (!master) { + saif->master_id = saif->id; + } else { + ret = of_alias_get_id(master, "saif"); + of_node_put(master); + if (ret < 0) + return ret; + else + saif->master_id = ret; + + if (saif->master_id >= ARRAY_SIZE(mxs_saif)) { + dev_err(&pdev->dev, "get wrong master id\n"); + return -EINVAL; + } + } + + mxs_saif[saif->id] = saif; + + saif->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(saif->clk)) { + ret = PTR_ERR(saif->clk); + dev_err(&pdev->dev, "Cannot get the clock: %d\n", + ret); + return ret; + } + + saif->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(saif->base)) + return PTR_ERR(saif->base); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + saif->dev = &pdev->dev; + ret = devm_request_irq(&pdev->dev, irq, mxs_saif_irq, 0, + dev_name(&pdev->dev), saif); + if (ret) { + dev_err(&pdev->dev, "failed to request irq\n"); + return ret; + } + + platform_set_drvdata(pdev, saif); + + /* We only support saif0 being tx and clock master */ + if (saif->id == 0) { + ret = mxs_saif_mclk_init(pdev); + if (ret) + dev_warn(&pdev->dev, "failed to init clocks\n"); + } + + ret = devm_snd_soc_register_component(&pdev->dev, &mxs_saif_component, + &mxs_saif_dai, 1); + if (ret) { + dev_err(&pdev->dev, "register DAI failed\n"); + return ret; + } + + ret = mxs_pcm_platform_register(&pdev->dev); + if (ret) { + dev_err(&pdev->dev, "register PCM failed: %d\n", ret); + return ret; + } + + return 0; +} + +static const struct of_device_id mxs_saif_dt_ids[] = { + { .compatible = "fsl,imx28-saif", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, mxs_saif_dt_ids); + +static struct platform_driver mxs_saif_driver = { + .probe = mxs_saif_probe, + + .driver = { + .name = "mxs-saif", + .of_match_table = mxs_saif_dt_ids, + }, +}; + +module_platform_driver(mxs_saif_driver); + +MODULE_AUTHOR("Freescale Semiconductor, Inc."); +MODULE_DESCRIPTION("MXS ASoC SAIF driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:mxs-saif"); diff --git a/sound/soc/mxs/mxs-saif.h b/sound/soc/mxs/mxs-saif.h new file mode 100644 index 000000000..8f369283d --- /dev/null +++ b/sound/soc/mxs/mxs-saif.h @@ -0,0 +1,123 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. + */ + + +#ifndef _MXS_SAIF_H +#define _MXS_SAIF_H + +#define SAIF_CTRL 0x0 +#define SAIF_STAT 0x10 +#define SAIF_DATA 0x20 +#define SAIF_VERSION 0X30 + +/* SAIF_CTRL */ +#define BM_SAIF_CTRL_SFTRST 0x80000000 +#define BM_SAIF_CTRL_CLKGATE 0x40000000 +#define BP_SAIF_CTRL_BITCLK_MULT_RATE 27 +#define BM_SAIF_CTRL_BITCLK_MULT_RATE 0x38000000 +#define BF_SAIF_CTRL_BITCLK_MULT_RATE(v) \ + (((v) << 27) & BM_SAIF_CTRL_BITCLK_MULT_RATE) +#define BM_SAIF_CTRL_BITCLK_BASE_RATE 0x04000000 +#define BM_SAIF_CTRL_FIFO_ERROR_IRQ_EN 0x02000000 +#define BM_SAIF_CTRL_FIFO_SERVICE_IRQ_EN 0x01000000 +#define BP_SAIF_CTRL_RSRVD2 21 +#define BM_SAIF_CTRL_RSRVD2 0x00E00000 + +#define BP_SAIF_CTRL_DMAWAIT_COUNT 16 +#define BM_SAIF_CTRL_DMAWAIT_COUNT 0x001F0000 +#define BF_SAIF_CTRL_DMAWAIT_COUNT(v) \ + (((v) << 16) & BM_SAIF_CTRL_DMAWAIT_COUNT) +#define BP_SAIF_CTRL_CHANNEL_NUM_SELECT 14 +#define BM_SAIF_CTRL_CHANNEL_NUM_SELECT 0x0000C000 +#define BF_SAIF_CTRL_CHANNEL_NUM_SELECT(v) \ + (((v) << 14) & BM_SAIF_CTRL_CHANNEL_NUM_SELECT) +#define BM_SAIF_CTRL_LRCLK_PULSE 0x00002000 +#define BM_SAIF_CTRL_BIT_ORDER 0x00001000 +#define BM_SAIF_CTRL_DELAY 0x00000800 +#define BM_SAIF_CTRL_JUSTIFY 0x00000400 +#define BM_SAIF_CTRL_LRCLK_POLARITY 0x00000200 +#define BM_SAIF_CTRL_BITCLK_EDGE 0x00000100 +#define BP_SAIF_CTRL_WORD_LENGTH 4 +#define BM_SAIF_CTRL_WORD_LENGTH 0x000000F0 +#define BF_SAIF_CTRL_WORD_LENGTH(v) \ + (((v) << 4) & BM_SAIF_CTRL_WORD_LENGTH) +#define BM_SAIF_CTRL_BITCLK_48XFS_ENABLE 0x00000008 +#define BM_SAIF_CTRL_SLAVE_MODE 0x00000004 +#define BM_SAIF_CTRL_READ_MODE 0x00000002 +#define BM_SAIF_CTRL_RUN 0x00000001 + +/* SAIF_STAT */ +#define BM_SAIF_STAT_PRESENT 0x80000000 +#define BP_SAIF_STAT_RSRVD2 17 +#define BM_SAIF_STAT_RSRVD2 0x7FFE0000 +#define BF_SAIF_STAT_RSRVD2(v) \ + (((v) << 17) & BM_SAIF_STAT_RSRVD2) +#define BM_SAIF_STAT_DMA_PREQ 0x00010000 +#define BP_SAIF_STAT_RSRVD1 7 +#define BM_SAIF_STAT_RSRVD1 0x0000FF80 +#define BF_SAIF_STAT_RSRVD1(v) \ + (((v) << 7) & BM_SAIF_STAT_RSRVD1) + +#define BM_SAIF_STAT_FIFO_UNDERFLOW_IRQ 0x00000040 +#define BM_SAIF_STAT_FIFO_OVERFLOW_IRQ 0x00000020 +#define BM_SAIF_STAT_FIFO_SERVICE_IRQ 0x00000010 +#define BP_SAIF_STAT_RSRVD0 1 +#define BM_SAIF_STAT_RSRVD0 0x0000000E +#define BF_SAIF_STAT_RSRVD0(v) \ + (((v) << 1) & BM_SAIF_STAT_RSRVD0) +#define BM_SAIF_STAT_BUSY 0x00000001 + +/* SAFI_DATA */ +#define BP_SAIF_DATA_PCM_RIGHT 16 +#define BM_SAIF_DATA_PCM_RIGHT 0xFFFF0000 +#define BF_SAIF_DATA_PCM_RIGHT(v) \ + (((v) << 16) & BM_SAIF_DATA_PCM_RIGHT) +#define BP_SAIF_DATA_PCM_LEFT 0 +#define BM_SAIF_DATA_PCM_LEFT 0x0000FFFF +#define BF_SAIF_DATA_PCM_LEFT(v) \ + (((v) << 0) & BM_SAIF_DATA_PCM_LEFT) + +/* SAIF_VERSION */ +#define BP_SAIF_VERSION_MAJOR 24 +#define BM_SAIF_VERSION_MAJOR 0xFF000000 +#define BF_SAIF_VERSION_MAJOR(v) \ + (((v) << 24) & BM_SAIF_VERSION_MAJOR) +#define BP_SAIF_VERSION_MINOR 16 +#define BM_SAIF_VERSION_MINOR 0x00FF0000 +#define BF_SAIF_VERSION_MINOR(v) \ + (((v) << 16) & BM_SAIF_VERSION_MINOR) +#define BP_SAIF_VERSION_STEP 0 +#define BM_SAIF_VERSION_STEP 0x0000FFFF +#define BF_SAIF_VERSION_STEP(v) \ + (((v) << 0) & BM_SAIF_VERSION_STEP) + +#define MXS_SAIF_MCLK 0 + +#include "mxs-pcm.h" + +struct mxs_saif { + struct device *dev; + struct clk *clk; + unsigned int mclk; + unsigned int mclk_in_use; + void __iomem *base; + unsigned int id; + unsigned int master_id; + unsigned int cur_rate; + unsigned int ongoing; + + u32 fifo_underrun; + u32 fifo_overrun; + + enum { + MXS_SAIF_STATE_STOPPED, + MXS_SAIF_STATE_RUNNING, + } state; +}; + +extern int mxs_saif_put_mclk(unsigned int saif_id); +extern int mxs_saif_get_mclk(unsigned int saif_id, unsigned int mclk, + unsigned int rate); +#endif diff --git a/sound/soc/mxs/mxs-sgtl5000.c b/sound/soc/mxs/mxs-sgtl5000.c new file mode 100644 index 000000000..fb721bc49 --- /dev/null +++ b/sound/soc/mxs/mxs-sgtl5000.c @@ -0,0 +1,203 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2011 Freescale Semiconductor, Inc. + */ + +#include <linux/module.h> +#include <linux/device.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/soc.h> +#include <sound/jack.h> +#include <sound/soc-dapm.h> + +#include "../codecs/sgtl5000.h" +#include "mxs-saif.h" + +static int mxs_sgtl5000_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); + struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); + struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0); + unsigned int rate = params_rate(params); + u32 mclk; + int ret; + + /* sgtl5000 does not support 512*rate when in 96000 fs */ + switch (rate) { + case 96000: + mclk = 256 * rate; + break; + default: + mclk = 512 * rate; + break; + } + + /* Set SGTL5000's SYSCLK (provided by SAIF MCLK) */ + ret = snd_soc_dai_set_sysclk(codec_dai, SGTL5000_SYSCLK, mclk, 0); + if (ret) { + dev_err(codec_dai->dev, "Failed to set sysclk to %u.%03uMHz\n", + mclk / 1000000, mclk / 1000 % 1000); + return ret; + } + + /* The SAIF MCLK should be the same as SGTL5000_SYSCLK */ + ret = snd_soc_dai_set_sysclk(cpu_dai, MXS_SAIF_MCLK, mclk, 0); + if (ret) { + dev_err(cpu_dai->dev, "Failed to set sysclk to %u.%03uMHz\n", + mclk / 1000000, mclk / 1000 % 1000); + return ret; + } + + return 0; +} + +static const struct snd_soc_ops mxs_sgtl5000_hifi_ops = { + .hw_params = mxs_sgtl5000_hw_params, +}; + +#define MXS_SGTL5000_DAI_FMT (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | \ + SND_SOC_DAIFMT_CBS_CFS) + + +SND_SOC_DAILINK_DEFS(hifi_tx, + DAILINK_COMP_ARRAY(COMP_EMPTY()), + DAILINK_COMP_ARRAY(COMP_CODEC(NULL, "sgtl5000")), + DAILINK_COMP_ARRAY(COMP_EMPTY())); + +SND_SOC_DAILINK_DEFS(hifi_rx, + DAILINK_COMP_ARRAY(COMP_EMPTY()), + DAILINK_COMP_ARRAY(COMP_CODEC(NULL, "sgtl5000")), + DAILINK_COMP_ARRAY(COMP_EMPTY())); + +static struct snd_soc_dai_link mxs_sgtl5000_dai[] = { + { + .name = "HiFi Tx", + .stream_name = "HiFi Playback", + .dai_fmt = MXS_SGTL5000_DAI_FMT, + .ops = &mxs_sgtl5000_hifi_ops, + .playback_only = true, + SND_SOC_DAILINK_REG(hifi_tx), + }, { + .name = "HiFi Rx", + .stream_name = "HiFi Capture", + .dai_fmt = MXS_SGTL5000_DAI_FMT, + .ops = &mxs_sgtl5000_hifi_ops, + .capture_only = true, + SND_SOC_DAILINK_REG(hifi_rx), + }, +}; + +static const struct snd_soc_dapm_widget mxs_sgtl5000_dapm_widgets[] = { + SND_SOC_DAPM_MIC("Mic Jack", NULL), + SND_SOC_DAPM_LINE("Line In Jack", NULL), + SND_SOC_DAPM_HP("Headphone Jack", NULL), + SND_SOC_DAPM_SPK("Line Out Jack", NULL), + SND_SOC_DAPM_SPK("Ext Spk", NULL), +}; + +static struct snd_soc_card mxs_sgtl5000 = { + .name = "mxs_sgtl5000", + .owner = THIS_MODULE, + .dai_link = mxs_sgtl5000_dai, + .num_links = ARRAY_SIZE(mxs_sgtl5000_dai), +}; + +static int mxs_sgtl5000_probe(struct platform_device *pdev) +{ + struct snd_soc_card *card = &mxs_sgtl5000; + int ret, i; + struct device_node *np = pdev->dev.of_node; + struct device_node *saif_np[2], *codec_np; + + saif_np[0] = of_parse_phandle(np, "saif-controllers", 0); + saif_np[1] = of_parse_phandle(np, "saif-controllers", 1); + codec_np = of_parse_phandle(np, "audio-codec", 0); + if (!saif_np[0] || !saif_np[1] || !codec_np) { + dev_err(&pdev->dev, "phandle missing or invalid\n"); + of_node_put(codec_np); + of_node_put(saif_np[0]); + of_node_put(saif_np[1]); + return -EINVAL; + } + + for (i = 0; i < 2; i++) { + mxs_sgtl5000_dai[i].codecs->name = NULL; + mxs_sgtl5000_dai[i].codecs->of_node = codec_np; + mxs_sgtl5000_dai[i].cpus->dai_name = NULL; + mxs_sgtl5000_dai[i].cpus->of_node = saif_np[i]; + mxs_sgtl5000_dai[i].platforms->name = NULL; + mxs_sgtl5000_dai[i].platforms->of_node = saif_np[i]; + } + + of_node_put(codec_np); + of_node_put(saif_np[0]); + of_node_put(saif_np[1]); + + /* + * Set an init clock(11.28Mhz) for sgtl5000 initialization(i2c r/w). + * The Sgtl5000 sysclk is derived from saif0 mclk and it's range + * should be >= 8MHz and <= 27M. + */ + ret = mxs_saif_get_mclk(0, 44100 * 256, 44100); + if (ret) { + dev_err(&pdev->dev, "failed to get mclk\n"); + return ret; + } + + card->dev = &pdev->dev; + + if (of_find_property(np, "audio-routing", NULL)) { + card->dapm_widgets = mxs_sgtl5000_dapm_widgets; + card->num_dapm_widgets = ARRAY_SIZE(mxs_sgtl5000_dapm_widgets); + + ret = snd_soc_of_parse_audio_routing(card, "audio-routing"); + if (ret) { + dev_err(&pdev->dev, "failed to parse audio-routing (%d)\n", + ret); + return ret; + } + } + + ret = devm_snd_soc_register_card(&pdev->dev, card); + if (ret) { + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", + ret); + return ret; + } + + return 0; +} + +static int mxs_sgtl5000_remove(struct platform_device *pdev) +{ + mxs_saif_put_mclk(0); + + return 0; +} + +static const struct of_device_id mxs_sgtl5000_dt_ids[] = { + { .compatible = "fsl,mxs-audio-sgtl5000", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, mxs_sgtl5000_dt_ids); + +static struct platform_driver mxs_sgtl5000_audio_driver = { + .driver = { + .name = "mxs-sgtl5000", + .of_match_table = mxs_sgtl5000_dt_ids, + }, + .probe = mxs_sgtl5000_probe, + .remove = mxs_sgtl5000_remove, +}; + +module_platform_driver(mxs_sgtl5000_audio_driver); + +MODULE_AUTHOR("Freescale Semiconductor, Inc."); +MODULE_DESCRIPTION("MXS ALSA SoC Machine driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:mxs-sgtl5000"); |