diff options
Diffstat (limited to '')
-rw-r--r-- | sound/soc/pxa/pxa-ssp.c | 913 |
1 files changed, 913 insertions, 0 deletions
diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c new file mode 100644 index 000000000..d847263a1 --- /dev/null +++ b/sound/soc/pxa/pxa-ssp.c @@ -0,0 +1,913 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * pxa-ssp.c -- ALSA Soc Audio Layer + * + * Copyright 2005,2008 Wolfson Microelectronics PLC. + * Author: Liam Girdwood + * Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * TODO: + * o Test network mode for > 16bit sample size + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/pxa2xx_ssp.h> +#include <linux/of.h> +#include <linux/dmaengine.h> + +#include <asm/irq.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/initval.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/pxa2xx-lib.h> +#include <sound/dmaengine_pcm.h> + +#include "pxa-ssp.h" + +/* + * SSP audio private data + */ +struct ssp_priv { + struct ssp_device *ssp; + struct clk *extclk; + unsigned long ssp_clk; + unsigned int sysclk; + unsigned int dai_fmt; + unsigned int configured_dai_fmt; +#ifdef CONFIG_PM + uint32_t cr0; + uint32_t cr1; + uint32_t to; + uint32_t psp; +#endif +}; + +static void dump_registers(struct ssp_device *ssp) +{ + dev_dbg(ssp->dev, "SSCR0 0x%08x SSCR1 0x%08x SSTO 0x%08x\n", + pxa_ssp_read_reg(ssp, SSCR0), pxa_ssp_read_reg(ssp, SSCR1), + pxa_ssp_read_reg(ssp, SSTO)); + + dev_dbg(ssp->dev, "SSPSP 0x%08x SSSR 0x%08x SSACD 0x%08x\n", + pxa_ssp_read_reg(ssp, SSPSP), pxa_ssp_read_reg(ssp, SSSR), + pxa_ssp_read_reg(ssp, SSACD)); +} + +static void pxa_ssp_enable(struct ssp_device *ssp) +{ + uint32_t sscr0; + + sscr0 = __raw_readl(ssp->mmio_base + SSCR0) | SSCR0_SSE; + __raw_writel(sscr0, ssp->mmio_base + SSCR0); +} + +static void pxa_ssp_disable(struct ssp_device *ssp) +{ + uint32_t sscr0; + + sscr0 = __raw_readl(ssp->mmio_base + SSCR0) & ~SSCR0_SSE; + __raw_writel(sscr0, ssp->mmio_base + SSCR0); +} + +static void pxa_ssp_set_dma_params(struct ssp_device *ssp, int width4, + int out, struct snd_dmaengine_dai_dma_data *dma) +{ + dma->addr_width = width4 ? DMA_SLAVE_BUSWIDTH_4_BYTES : + DMA_SLAVE_BUSWIDTH_2_BYTES; + dma->maxburst = 16; + dma->addr = ssp->phys_base + SSDR; +} + +static int pxa_ssp_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *cpu_dai) +{ + struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai); + struct ssp_device *ssp = priv->ssp; + struct snd_dmaengine_dai_dma_data *dma; + int ret = 0; + + if (!snd_soc_dai_active(cpu_dai)) { + clk_prepare_enable(ssp->clk); + pxa_ssp_disable(ssp); + } + + if (priv->extclk) + clk_prepare_enable(priv->extclk); + + dma = kzalloc(sizeof(struct snd_dmaengine_dai_dma_data), GFP_KERNEL); + if (!dma) + return -ENOMEM; + dma->chan_name = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? + "tx" : "rx"; + + snd_soc_dai_set_dma_data(cpu_dai, substream, dma); + + return ret; +} + +static void pxa_ssp_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *cpu_dai) +{ + struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai); + struct ssp_device *ssp = priv->ssp; + + if (!snd_soc_dai_active(cpu_dai)) { + pxa_ssp_disable(ssp); + clk_disable_unprepare(ssp->clk); + } + + if (priv->extclk) + clk_disable_unprepare(priv->extclk); + + kfree(snd_soc_dai_get_dma_data(cpu_dai, substream)); + snd_soc_dai_set_dma_data(cpu_dai, substream, NULL); +} + +#ifdef CONFIG_PM + +static int pxa_ssp_suspend(struct snd_soc_component *component) +{ + struct ssp_priv *priv = snd_soc_component_get_drvdata(component); + struct ssp_device *ssp = priv->ssp; + + if (!snd_soc_component_active(component)) + clk_prepare_enable(ssp->clk); + + priv->cr0 = __raw_readl(ssp->mmio_base + SSCR0); + priv->cr1 = __raw_readl(ssp->mmio_base + SSCR1); + priv->to = __raw_readl(ssp->mmio_base + SSTO); + priv->psp = __raw_readl(ssp->mmio_base + SSPSP); + + pxa_ssp_disable(ssp); + clk_disable_unprepare(ssp->clk); + return 0; +} + +static int pxa_ssp_resume(struct snd_soc_component *component) +{ + struct ssp_priv *priv = snd_soc_component_get_drvdata(component); + struct ssp_device *ssp = priv->ssp; + uint32_t sssr = SSSR_ROR | SSSR_TUR | SSSR_BCE; + + clk_prepare_enable(ssp->clk); + + __raw_writel(sssr, ssp->mmio_base + SSSR); + __raw_writel(priv->cr0 & ~SSCR0_SSE, ssp->mmio_base + SSCR0); + __raw_writel(priv->cr1, ssp->mmio_base + SSCR1); + __raw_writel(priv->to, ssp->mmio_base + SSTO); + __raw_writel(priv->psp, ssp->mmio_base + SSPSP); + + if (snd_soc_component_active(component)) + pxa_ssp_enable(ssp); + else + clk_disable_unprepare(ssp->clk); + + return 0; +} + +#else +#define pxa_ssp_suspend NULL +#define pxa_ssp_resume NULL +#endif + +/* + * ssp_set_clkdiv - set SSP clock divider + * @div: serial clock rate divider + */ +static void pxa_ssp_set_scr(struct ssp_device *ssp, u32 div) +{ + u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0); + + if (ssp->type == PXA25x_SSP) { + sscr0 &= ~0x0000ff00; + sscr0 |= ((div - 2)/2) << 8; /* 2..512 */ + } else { + sscr0 &= ~0x000fff00; + sscr0 |= (div - 1) << 8; /* 1..4096 */ + } + pxa_ssp_write_reg(ssp, SSCR0, sscr0); +} + +/* + * Set the SSP ports SYSCLK. + */ +static int pxa_ssp_set_dai_sysclk(struct snd_soc_dai *cpu_dai, + int clk_id, unsigned int freq, int dir) +{ + struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai); + struct ssp_device *ssp = priv->ssp; + + u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0) & + ~(SSCR0_ECS | SSCR0_NCS | SSCR0_MOD | SSCR0_ACS); + + if (priv->extclk) { + int ret; + + /* + * For DT based boards, if an extclk is given, use it + * here and configure PXA_SSP_CLK_EXT. + */ + + ret = clk_set_rate(priv->extclk, freq); + if (ret < 0) + return ret; + + clk_id = PXA_SSP_CLK_EXT; + } + + dev_dbg(ssp->dev, + "pxa_ssp_set_dai_sysclk id: %d, clk_id %d, freq %u\n", + cpu_dai->id, clk_id, freq); + + switch (clk_id) { + case PXA_SSP_CLK_NET_PLL: + sscr0 |= SSCR0_MOD; + break; + case PXA_SSP_CLK_PLL: + /* Internal PLL is fixed */ + if (ssp->type == PXA25x_SSP) + priv->sysclk = 1843200; + else + priv->sysclk = 13000000; + break; + case PXA_SSP_CLK_EXT: + priv->sysclk = freq; + sscr0 |= SSCR0_ECS; + break; + case PXA_SSP_CLK_NET: + priv->sysclk = freq; + sscr0 |= SSCR0_NCS | SSCR0_MOD; + break; + case PXA_SSP_CLK_AUDIO: + priv->sysclk = 0; + pxa_ssp_set_scr(ssp, 1); + sscr0 |= SSCR0_ACS; + break; + default: + return -ENODEV; + } + + /* The SSP clock must be disabled when changing SSP clock mode + * on PXA2xx. On PXA3xx it must be enabled when doing so. */ + if (ssp->type != PXA3xx_SSP) + clk_disable_unprepare(ssp->clk); + pxa_ssp_write_reg(ssp, SSCR0, sscr0); + if (ssp->type != PXA3xx_SSP) + clk_prepare_enable(ssp->clk); + + return 0; +} + +/* + * Configure the PLL frequency pxa27x and (afaik - pxa320 only) + */ +static int pxa_ssp_set_pll(struct ssp_priv *priv, unsigned int freq) +{ + struct ssp_device *ssp = priv->ssp; + u32 ssacd = pxa_ssp_read_reg(ssp, SSACD) & ~0x70; + + if (ssp->type == PXA3xx_SSP) + pxa_ssp_write_reg(ssp, SSACDD, 0); + + switch (freq) { + case 5622000: + break; + case 11345000: + ssacd |= (0x1 << 4); + break; + case 12235000: + ssacd |= (0x2 << 4); + break; + case 14857000: + ssacd |= (0x3 << 4); + break; + case 32842000: + ssacd |= (0x4 << 4); + break; + case 48000000: + ssacd |= (0x5 << 4); + break; + case 0: + /* Disable */ + break; + + default: + /* PXA3xx has a clock ditherer which can be used to generate + * a wider range of frequencies - calculate a value for it. + */ + if (ssp->type == PXA3xx_SSP) { + u32 val; + u64 tmp = 19968; + + tmp *= 1000000; + do_div(tmp, freq); + val = tmp; + + val = (val << 16) | 64; + pxa_ssp_write_reg(ssp, SSACDD, val); + + ssacd |= (0x6 << 4); + + dev_dbg(ssp->dev, + "Using SSACDD %x to supply %uHz\n", + val, freq); + break; + } + + return -EINVAL; + } + + pxa_ssp_write_reg(ssp, SSACD, ssacd); + + return 0; +} + +/* + * Set the active slots in TDM/Network mode + */ +static int pxa_ssp_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai, + unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width) +{ + struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai); + struct ssp_device *ssp = priv->ssp; + u32 sscr0; + + sscr0 = pxa_ssp_read_reg(ssp, SSCR0); + sscr0 &= ~(SSCR0_MOD | SSCR0_SlotsPerFrm(8) | SSCR0_EDSS | SSCR0_DSS); + + /* set slot width */ + if (slot_width > 16) + sscr0 |= SSCR0_EDSS | SSCR0_DataSize(slot_width - 16); + else + sscr0 |= SSCR0_DataSize(slot_width); + + if (slots > 1) { + /* enable network mode */ + sscr0 |= SSCR0_MOD; + + /* set number of active slots */ + sscr0 |= SSCR0_SlotsPerFrm(slots); + + /* set active slot mask */ + pxa_ssp_write_reg(ssp, SSTSA, tx_mask); + pxa_ssp_write_reg(ssp, SSRSA, rx_mask); + } + pxa_ssp_write_reg(ssp, SSCR0, sscr0); + + return 0; +} + +/* + * Tristate the SSP DAI lines + */ +static int pxa_ssp_set_dai_tristate(struct snd_soc_dai *cpu_dai, + int tristate) +{ + struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai); + struct ssp_device *ssp = priv->ssp; + u32 sscr1; + + sscr1 = pxa_ssp_read_reg(ssp, SSCR1); + if (tristate) + sscr1 &= ~SSCR1_TTE; + else + sscr1 |= SSCR1_TTE; + pxa_ssp_write_reg(ssp, SSCR1, sscr1); + + return 0; +} + +static int pxa_ssp_set_dai_fmt(struct snd_soc_dai *cpu_dai, + unsigned int fmt) +{ + struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai); + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + case SND_SOC_DAIFMT_CBM_CFS: + case SND_SOC_DAIFMT_CBS_CFS: + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + case SND_SOC_DAIFMT_NB_IF: + case SND_SOC_DAIFMT_IB_IF: + case SND_SOC_DAIFMT_IB_NF: + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + case SND_SOC_DAIFMT_DSP_A: + case SND_SOC_DAIFMT_DSP_B: + break; + + default: + return -EINVAL; + } + + /* Settings will be applied in hw_params() */ + priv->dai_fmt = fmt; + + return 0; +} + +/* + * Set up the SSP DAI format. + * The SSP Port must be inactive before calling this function as the + * physical interface format is changed. + */ +static int pxa_ssp_configure_dai_fmt(struct ssp_priv *priv) +{ + struct ssp_device *ssp = priv->ssp; + u32 sscr0, sscr1, sspsp, scfr; + + /* check if we need to change anything at all */ + if (priv->configured_dai_fmt == priv->dai_fmt) + return 0; + + /* reset port settings */ + sscr0 = pxa_ssp_read_reg(ssp, SSCR0) & + ~(SSCR0_PSP | SSCR0_MOD); + sscr1 = pxa_ssp_read_reg(ssp, SSCR1) & + ~(SSCR1_SCLKDIR | SSCR1_SFRMDIR | SSCR1_SCFR | + SSCR1_RWOT | SSCR1_TRAIL | SSCR1_TFT | SSCR1_RFT); + sspsp = pxa_ssp_read_reg(ssp, SSPSP) & + ~(SSPSP_SFRMP | SSPSP_SCMODE(3)); + + sscr1 |= SSCR1_RxTresh(8) | SSCR1_TxTresh(7); + + switch (priv->dai_fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + sscr1 |= SSCR1_SCLKDIR | SSCR1_SFRMDIR | SSCR1_SCFR; + break; + case SND_SOC_DAIFMT_CBM_CFS: + sscr1 |= SSCR1_SCLKDIR | SSCR1_SCFR; + break; + case SND_SOC_DAIFMT_CBS_CFS: + break; + default: + return -EINVAL; + } + + switch (priv->dai_fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + sspsp |= SSPSP_SFRMP; + break; + case SND_SOC_DAIFMT_NB_IF: + break; + case SND_SOC_DAIFMT_IB_IF: + sspsp |= SSPSP_SCMODE(2); + break; + case SND_SOC_DAIFMT_IB_NF: + sspsp |= SSPSP_SCMODE(2) | SSPSP_SFRMP; + break; + default: + return -EINVAL; + } + + switch (priv->dai_fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + sscr0 |= SSCR0_PSP; + sscr1 |= SSCR1_RWOT | SSCR1_TRAIL; + /* See hw_params() */ + break; + + case SND_SOC_DAIFMT_DSP_A: + sspsp |= SSPSP_FSRT; + fallthrough; + case SND_SOC_DAIFMT_DSP_B: + sscr0 |= SSCR0_MOD | SSCR0_PSP; + sscr1 |= SSCR1_TRAIL | SSCR1_RWOT; + break; + + default: + return -EINVAL; + } + + pxa_ssp_write_reg(ssp, SSCR0, sscr0); + pxa_ssp_write_reg(ssp, SSCR1, sscr1); + pxa_ssp_write_reg(ssp, SSPSP, sspsp); + + switch (priv->dai_fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + case SND_SOC_DAIFMT_CBM_CFS: + scfr = pxa_ssp_read_reg(ssp, SSCR1) | SSCR1_SCFR; + pxa_ssp_write_reg(ssp, SSCR1, scfr); + + while (pxa_ssp_read_reg(ssp, SSSR) & SSSR_BSY) + cpu_relax(); + break; + } + + dump_registers(ssp); + + /* Since we are configuring the timings for the format by hand + * we have to defer some things until hw_params() where we + * know parameters like the sample size. + */ + priv->configured_dai_fmt = priv->dai_fmt; + + return 0; +} + +struct pxa_ssp_clock_mode { + int rate; + int pll; + u8 acds; + u8 scdb; +}; + +static const struct pxa_ssp_clock_mode pxa_ssp_clock_modes[] = { + { .rate = 8000, .pll = 32842000, .acds = SSACD_ACDS_32, .scdb = SSACD_SCDB_4X }, + { .rate = 11025, .pll = 5622000, .acds = SSACD_ACDS_4, .scdb = SSACD_SCDB_4X }, + { .rate = 16000, .pll = 32842000, .acds = SSACD_ACDS_16, .scdb = SSACD_SCDB_4X }, + { .rate = 22050, .pll = 5622000, .acds = SSACD_ACDS_2, .scdb = SSACD_SCDB_4X }, + { .rate = 44100, .pll = 11345000, .acds = SSACD_ACDS_2, .scdb = SSACD_SCDB_4X }, + { .rate = 48000, .pll = 12235000, .acds = SSACD_ACDS_2, .scdb = SSACD_SCDB_4X }, + { .rate = 96000, .pll = 12235000, .acds = SSACD_ACDS_4, .scdb = SSACD_SCDB_1X }, + {} +}; + +/* + * Set the SSP audio DMA parameters and sample size. + * Can be called multiple times by oss emulation. + */ +static int pxa_ssp_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *cpu_dai) +{ + struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai); + struct ssp_device *ssp = priv->ssp; + int chn = params_channels(params); + u32 sscr0, sspsp; + int width = snd_pcm_format_physical_width(params_format(params)); + int ttsa = pxa_ssp_read_reg(ssp, SSTSA) & 0xf; + struct snd_dmaengine_dai_dma_data *dma_data; + int rate = params_rate(params); + int bclk = rate * chn * (width / 8); + int ret; + + dma_data = snd_soc_dai_get_dma_data(cpu_dai, substream); + + /* Network mode with one active slot (ttsa == 1) can be used + * to force 16-bit frame width on the wire (for S16_LE), even + * with two channels. Use 16-bit DMA transfers for this case. + */ + pxa_ssp_set_dma_params(ssp, + ((chn == 2) && (ttsa != 1)) || (width == 32), + substream->stream == SNDRV_PCM_STREAM_PLAYBACK, dma_data); + + /* we can only change the settings if the port is not in use */ + if (pxa_ssp_read_reg(ssp, SSCR0) & SSCR0_SSE) + return 0; + + ret = pxa_ssp_configure_dai_fmt(priv); + if (ret < 0) + return ret; + + /* clear selected SSP bits */ + sscr0 = pxa_ssp_read_reg(ssp, SSCR0) & ~(SSCR0_DSS | SSCR0_EDSS); + + /* bit size */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + if (ssp->type == PXA3xx_SSP) + sscr0 |= SSCR0_FPCKE; + sscr0 |= SSCR0_DataSize(16); + break; + case SNDRV_PCM_FORMAT_S24_LE: + sscr0 |= (SSCR0_EDSS | SSCR0_DataSize(8)); + break; + case SNDRV_PCM_FORMAT_S32_LE: + sscr0 |= (SSCR0_EDSS | SSCR0_DataSize(16)); + break; + } + pxa_ssp_write_reg(ssp, SSCR0, sscr0); + + if (sscr0 & SSCR0_ACS) { + ret = pxa_ssp_set_pll(priv, bclk); + + /* + * If we were able to generate the bclk directly, + * all is fine. Otherwise, look up the closest rate + * from the table and also set the dividers. + */ + + if (ret < 0) { + const struct pxa_ssp_clock_mode *m; + int ssacd, acds; + + for (m = pxa_ssp_clock_modes; m->rate; m++) { + if (m->rate == rate) + break; + } + + if (!m->rate) + return -EINVAL; + + acds = m->acds; + + /* The values in the table are for 16 bits */ + if (width == 32) + acds--; + + ret = pxa_ssp_set_pll(priv, bclk); + if (ret < 0) + return ret; + + ssacd = pxa_ssp_read_reg(ssp, SSACD); + ssacd &= ~(SSACD_ACDS(7) | SSACD_SCDB_1X); + ssacd |= SSACD_ACDS(m->acds); + ssacd |= m->scdb; + pxa_ssp_write_reg(ssp, SSACD, ssacd); + } + } else if (sscr0 & SSCR0_ECS) { + /* + * For setups with external clocking, the PLL and its diviers + * are not active. Instead, the SCR bits in SSCR0 can be used + * to divide the clock. + */ + pxa_ssp_set_scr(ssp, bclk / rate); + } + + switch (priv->dai_fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + sspsp = pxa_ssp_read_reg(ssp, SSPSP); + + if (((priv->sysclk / bclk) == 64) && (width == 16)) { + /* This is a special case where the bitclk is 64fs + * and we're not dealing with 2*32 bits of audio + * samples. + * + * The SSP values used for that are all found out by + * trying and failing a lot; some of the registers + * needed for that mode are only available on PXA3xx. + */ + if (ssp->type != PXA3xx_SSP) + return -EINVAL; + + sspsp |= SSPSP_SFRMWDTH(width * 2); + sspsp |= SSPSP_SFRMDLY(width * 4); + sspsp |= SSPSP_EDMYSTOP(3); + sspsp |= SSPSP_DMYSTOP(3); + sspsp |= SSPSP_DMYSTRT(1); + } else { + /* The frame width is the width the LRCLK is + * asserted for; the delay is expressed in + * half cycle units. We need the extra cycle + * because the data starts clocking out one BCLK + * after LRCLK changes polarity. + */ + sspsp |= SSPSP_SFRMWDTH(width + 1); + sspsp |= SSPSP_SFRMDLY((width + 1) * 2); + sspsp |= SSPSP_DMYSTRT(1); + } + + pxa_ssp_write_reg(ssp, SSPSP, sspsp); + break; + default: + break; + } + + /* When we use a network mode, we always require TDM slots + * - complain loudly and fail if they've not been set up yet. + */ + if ((sscr0 & SSCR0_MOD) && !ttsa) { + dev_err(ssp->dev, "No TDM timeslot configured\n"); + return -EINVAL; + } + + dump_registers(ssp); + + return 0; +} + +static void pxa_ssp_set_running_bit(struct snd_pcm_substream *substream, + struct ssp_device *ssp, int value) +{ + uint32_t sscr0 = pxa_ssp_read_reg(ssp, SSCR0); + uint32_t sscr1 = pxa_ssp_read_reg(ssp, SSCR1); + uint32_t sspsp = pxa_ssp_read_reg(ssp, SSPSP); + uint32_t sssr = pxa_ssp_read_reg(ssp, SSSR); + + if (value && (sscr0 & SSCR0_SSE)) + pxa_ssp_write_reg(ssp, SSCR0, sscr0 & ~SSCR0_SSE); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + if (value) + sscr1 |= SSCR1_TSRE; + else + sscr1 &= ~SSCR1_TSRE; + } else { + if (value) + sscr1 |= SSCR1_RSRE; + else + sscr1 &= ~SSCR1_RSRE; + } + + pxa_ssp_write_reg(ssp, SSCR1, sscr1); + + if (value) { + pxa_ssp_write_reg(ssp, SSSR, sssr); + pxa_ssp_write_reg(ssp, SSPSP, sspsp); + pxa_ssp_write_reg(ssp, SSCR0, sscr0 | SSCR0_SSE); + } +} + +static int pxa_ssp_trigger(struct snd_pcm_substream *substream, int cmd, + struct snd_soc_dai *cpu_dai) +{ + int ret = 0; + struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai); + struct ssp_device *ssp = priv->ssp; + int val; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_RESUME: + pxa_ssp_enable(ssp); + break; + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + pxa_ssp_set_running_bit(substream, ssp, 1); + val = pxa_ssp_read_reg(ssp, SSSR); + pxa_ssp_write_reg(ssp, SSSR, val); + break; + case SNDRV_PCM_TRIGGER_START: + pxa_ssp_set_running_bit(substream, ssp, 1); + break; + case SNDRV_PCM_TRIGGER_STOP: + pxa_ssp_set_running_bit(substream, ssp, 0); + break; + case SNDRV_PCM_TRIGGER_SUSPEND: + pxa_ssp_disable(ssp); + break; + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + pxa_ssp_set_running_bit(substream, ssp, 0); + break; + + default: + ret = -EINVAL; + } + + dump_registers(ssp); + + return ret; +} + +static int pxa_ssp_probe(struct snd_soc_dai *dai) +{ + struct device *dev = dai->dev; + struct ssp_priv *priv; + int ret; + + priv = kzalloc(sizeof(struct ssp_priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + if (dev->of_node) { + struct device_node *ssp_handle; + + ssp_handle = of_parse_phandle(dev->of_node, "port", 0); + if (!ssp_handle) { + dev_err(dev, "unable to get 'port' phandle\n"); + ret = -ENODEV; + goto err_priv; + } + + priv->ssp = pxa_ssp_request_of(ssp_handle, "SoC audio"); + if (priv->ssp == NULL) { + ret = -ENODEV; + goto err_priv; + } + + priv->extclk = devm_clk_get(dev, "extclk"); + if (IS_ERR(priv->extclk)) { + ret = PTR_ERR(priv->extclk); + if (ret == -EPROBE_DEFER) + goto err_priv; + + priv->extclk = NULL; + } + } else { + priv->ssp = pxa_ssp_request(dai->id + 1, "SoC audio"); + if (priv->ssp == NULL) { + ret = -ENODEV; + goto err_priv; + } + } + + priv->dai_fmt = (unsigned int) -1; + snd_soc_dai_set_drvdata(dai, priv); + + return 0; + +err_priv: + kfree(priv); + return ret; +} + +static int pxa_ssp_remove(struct snd_soc_dai *dai) +{ + struct ssp_priv *priv = snd_soc_dai_get_drvdata(dai); + + pxa_ssp_free(priv->ssp); + kfree(priv); + return 0; +} + +#define PXA_SSP_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\ + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | \ + SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ + SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_64000 | \ + SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000) + +#define PXA_SSP_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE) + +static const struct snd_soc_dai_ops pxa_ssp_dai_ops = { + .startup = pxa_ssp_startup, + .shutdown = pxa_ssp_shutdown, + .trigger = pxa_ssp_trigger, + .hw_params = pxa_ssp_hw_params, + .set_sysclk = pxa_ssp_set_dai_sysclk, + .set_fmt = pxa_ssp_set_dai_fmt, + .set_tdm_slot = pxa_ssp_set_dai_tdm_slot, + .set_tristate = pxa_ssp_set_dai_tristate, +}; + +static struct snd_soc_dai_driver pxa_ssp_dai = { + .probe = pxa_ssp_probe, + .remove = pxa_ssp_remove, + .playback = { + .channels_min = 1, + .channels_max = 8, + .rates = PXA_SSP_RATES, + .formats = PXA_SSP_FORMATS, + }, + .capture = { + .channels_min = 1, + .channels_max = 8, + .rates = PXA_SSP_RATES, + .formats = PXA_SSP_FORMATS, + }, + .ops = &pxa_ssp_dai_ops, +}; + +static const struct snd_soc_component_driver pxa_ssp_component = { + .name = "pxa-ssp", + .pcm_construct = pxa2xx_soc_pcm_new, + .pcm_destruct = pxa2xx_soc_pcm_free, + .open = pxa2xx_soc_pcm_open, + .close = pxa2xx_soc_pcm_close, + .hw_params = pxa2xx_soc_pcm_hw_params, + .hw_free = pxa2xx_soc_pcm_hw_free, + .prepare = pxa2xx_soc_pcm_prepare, + .trigger = pxa2xx_soc_pcm_trigger, + .pointer = pxa2xx_soc_pcm_pointer, + .mmap = pxa2xx_soc_pcm_mmap, + .suspend = pxa_ssp_suspend, + .resume = pxa_ssp_resume, +}; + +#ifdef CONFIG_OF +static const struct of_device_id pxa_ssp_of_ids[] = { + { .compatible = "mrvl,pxa-ssp-dai" }, + {} +}; +MODULE_DEVICE_TABLE(of, pxa_ssp_of_ids); +#endif + +static int asoc_ssp_probe(struct platform_device *pdev) +{ + return devm_snd_soc_register_component(&pdev->dev, &pxa_ssp_component, + &pxa_ssp_dai, 1); +} + +static struct platform_driver asoc_ssp_driver = { + .driver = { + .name = "pxa-ssp-dai", + .of_match_table = of_match_ptr(pxa_ssp_of_ids), + }, + + .probe = asoc_ssp_probe, +}; + +module_platform_driver(asoc_ssp_driver); + +/* Module information */ +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); +MODULE_DESCRIPTION("PXA SSP/PCM SoC Interface"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:pxa-ssp-dai"); |