diff options
Diffstat (limited to 'sound/soc/sof/intel/hda-dsp.c')
| -rw-r--r-- | sound/soc/sof/intel/hda-dsp.c | 964 |
1 files changed, 964 insertions, 0 deletions
diff --git a/sound/soc/sof/intel/hda-dsp.c b/sound/soc/sof/intel/hda-dsp.c new file mode 100644 index 000000000..85ec4361c --- /dev/null +++ b/sound/soc/sof/intel/hda-dsp.c @@ -0,0 +1,964 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) +// +// This file is provided under a dual BSD/GPLv2 license. When using or +// redistributing this file, you may do so under either license. +// +// Copyright(c) 2018 Intel Corporation. All rights reserved. +// +// Authors: Liam Girdwood <liam.r.girdwood@linux.intel.com> +// Ranjani Sridharan <ranjani.sridharan@linux.intel.com> +// Rander Wang <rander.wang@intel.com> +// Keyon Jie <yang.jie@linux.intel.com> +// + +/* + * Hardware interface for generic Intel audio DSP HDA IP + */ + +#include <linux/module.h> +#include <sound/hdaudio_ext.h> +#include <sound/hda_register.h> +#include "../sof-audio.h" +#include "../ops.h" +#include "hda.h" +#include "hda-ipc.h" + +static bool hda_enable_trace_D0I3_S0; +#if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG) +module_param_named(enable_trace_D0I3_S0, hda_enable_trace_D0I3_S0, bool, 0444); +MODULE_PARM_DESC(enable_trace_D0I3_S0, + "SOF HDA enable trace when the DSP is in D0I3 in S0"); +#endif + +/* + * DSP Core control. + */ + +int hda_dsp_core_reset_enter(struct snd_sof_dev *sdev, unsigned int core_mask) +{ + u32 adspcs; + u32 reset; + int ret; + + /* set reset bits for cores */ + reset = HDA_DSP_ADSPCS_CRST_MASK(core_mask); + snd_sof_dsp_update_bits_unlocked(sdev, HDA_DSP_BAR, + HDA_DSP_REG_ADSPCS, + reset, reset), + + /* poll with timeout to check if operation successful */ + ret = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR, + HDA_DSP_REG_ADSPCS, adspcs, + ((adspcs & reset) == reset), + HDA_DSP_REG_POLL_INTERVAL_US, + HDA_DSP_RESET_TIMEOUT_US); + if (ret < 0) { + dev_err(sdev->dev, + "error: %s: timeout on HDA_DSP_REG_ADSPCS read\n", + __func__); + return ret; + } + + /* has core entered reset ? */ + adspcs = snd_sof_dsp_read(sdev, HDA_DSP_BAR, + HDA_DSP_REG_ADSPCS); + if ((adspcs & HDA_DSP_ADSPCS_CRST_MASK(core_mask)) != + HDA_DSP_ADSPCS_CRST_MASK(core_mask)) { + dev_err(sdev->dev, + "error: reset enter failed: core_mask %x adspcs 0x%x\n", + core_mask, adspcs); + ret = -EIO; + } + + return ret; +} + +int hda_dsp_core_reset_leave(struct snd_sof_dev *sdev, unsigned int core_mask) +{ + unsigned int crst; + u32 adspcs; + int ret; + + /* clear reset bits for cores */ + snd_sof_dsp_update_bits_unlocked(sdev, HDA_DSP_BAR, + HDA_DSP_REG_ADSPCS, + HDA_DSP_ADSPCS_CRST_MASK(core_mask), + 0); + + /* poll with timeout to check if operation successful */ + crst = HDA_DSP_ADSPCS_CRST_MASK(core_mask); + ret = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR, + HDA_DSP_REG_ADSPCS, adspcs, + !(adspcs & crst), + HDA_DSP_REG_POLL_INTERVAL_US, + HDA_DSP_RESET_TIMEOUT_US); + + if (ret < 0) { + dev_err(sdev->dev, + "error: %s: timeout on HDA_DSP_REG_ADSPCS read\n", + __func__); + return ret; + } + + /* has core left reset ? */ + adspcs = snd_sof_dsp_read(sdev, HDA_DSP_BAR, + HDA_DSP_REG_ADSPCS); + if ((adspcs & HDA_DSP_ADSPCS_CRST_MASK(core_mask)) != 0) { + dev_err(sdev->dev, + "error: reset leave failed: core_mask %x adspcs 0x%x\n", + core_mask, adspcs); + ret = -EIO; + } + + return ret; +} + +int hda_dsp_core_stall_reset(struct snd_sof_dev *sdev, unsigned int core_mask) +{ + /* stall core */ + snd_sof_dsp_update_bits_unlocked(sdev, HDA_DSP_BAR, + HDA_DSP_REG_ADSPCS, + HDA_DSP_ADSPCS_CSTALL_MASK(core_mask), + HDA_DSP_ADSPCS_CSTALL_MASK(core_mask)); + + /* set reset state */ + return hda_dsp_core_reset_enter(sdev, core_mask); +} + +int hda_dsp_core_run(struct snd_sof_dev *sdev, unsigned int core_mask) +{ + int ret; + + /* leave reset state */ + ret = hda_dsp_core_reset_leave(sdev, core_mask); + if (ret < 0) + return ret; + + /* run core */ + dev_dbg(sdev->dev, "unstall/run core: core_mask = %x\n", core_mask); + snd_sof_dsp_update_bits_unlocked(sdev, HDA_DSP_BAR, + HDA_DSP_REG_ADSPCS, + HDA_DSP_ADSPCS_CSTALL_MASK(core_mask), + 0); + + /* is core now running ? */ + if (!hda_dsp_core_is_enabled(sdev, core_mask)) { + hda_dsp_core_stall_reset(sdev, core_mask); + dev_err(sdev->dev, "error: DSP start core failed: core_mask %x\n", + core_mask); + ret = -EIO; + } + + return ret; +} + +/* + * Power Management. + */ + +int hda_dsp_core_power_up(struct snd_sof_dev *sdev, unsigned int core_mask) +{ + unsigned int cpa; + u32 adspcs; + int ret; + + /* update bits */ + snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, HDA_DSP_REG_ADSPCS, + HDA_DSP_ADSPCS_SPA_MASK(core_mask), + HDA_DSP_ADSPCS_SPA_MASK(core_mask)); + + /* poll with timeout to check if operation successful */ + cpa = HDA_DSP_ADSPCS_CPA_MASK(core_mask); + ret = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR, + HDA_DSP_REG_ADSPCS, adspcs, + (adspcs & cpa) == cpa, + HDA_DSP_REG_POLL_INTERVAL_US, + HDA_DSP_RESET_TIMEOUT_US); + if (ret < 0) { + dev_err(sdev->dev, + "error: %s: timeout on HDA_DSP_REG_ADSPCS read\n", + __func__); + return ret; + } + + /* did core power up ? */ + adspcs = snd_sof_dsp_read(sdev, HDA_DSP_BAR, + HDA_DSP_REG_ADSPCS); + if ((adspcs & HDA_DSP_ADSPCS_CPA_MASK(core_mask)) != + HDA_DSP_ADSPCS_CPA_MASK(core_mask)) { + dev_err(sdev->dev, + "error: power up core failed core_mask %xadspcs 0x%x\n", + core_mask, adspcs); + ret = -EIO; + } + + return ret; +} + +int hda_dsp_core_power_down(struct snd_sof_dev *sdev, unsigned int core_mask) +{ + u32 adspcs; + int ret; + + /* update bits */ + snd_sof_dsp_update_bits_unlocked(sdev, HDA_DSP_BAR, + HDA_DSP_REG_ADSPCS, + HDA_DSP_ADSPCS_SPA_MASK(core_mask), 0); + + ret = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR, + HDA_DSP_REG_ADSPCS, adspcs, + !(adspcs & HDA_DSP_ADSPCS_CPA_MASK(core_mask)), + HDA_DSP_REG_POLL_INTERVAL_US, + HDA_DSP_PD_TIMEOUT * USEC_PER_MSEC); + if (ret < 0) + dev_err(sdev->dev, + "error: %s: timeout on HDA_DSP_REG_ADSPCS read\n", + __func__); + + return ret; +} + +bool hda_dsp_core_is_enabled(struct snd_sof_dev *sdev, + unsigned int core_mask) +{ + int val; + bool is_enable; + + val = snd_sof_dsp_read(sdev, HDA_DSP_BAR, HDA_DSP_REG_ADSPCS); + +#define MASK_IS_EQUAL(v, m, field) ({ \ + u32 _m = field(m); \ + ((v) & _m) == _m; \ +}) + + is_enable = MASK_IS_EQUAL(val, core_mask, HDA_DSP_ADSPCS_CPA_MASK) && + MASK_IS_EQUAL(val, core_mask, HDA_DSP_ADSPCS_SPA_MASK) && + !(val & HDA_DSP_ADSPCS_CRST_MASK(core_mask)) && + !(val & HDA_DSP_ADSPCS_CSTALL_MASK(core_mask)); + +#undef MASK_IS_EQUAL + + dev_dbg(sdev->dev, "DSP core(s) enabled? %d : core_mask %x\n", + is_enable, core_mask); + + return is_enable; +} + +int hda_dsp_enable_core(struct snd_sof_dev *sdev, unsigned int core_mask) +{ + struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata; + const struct sof_intel_dsp_desc *chip = hda->desc; + int ret; + + /* restrict core_mask to host managed cores mask */ + core_mask &= chip->host_managed_cores_mask; + + /* return if core_mask is not valid or cores are already enabled */ + if (!core_mask || hda_dsp_core_is_enabled(sdev, core_mask)) + return 0; + + /* power up */ + ret = hda_dsp_core_power_up(sdev, core_mask); + if (ret < 0) { + dev_err(sdev->dev, "error: dsp core power up failed: core_mask %x\n", + core_mask); + return ret; + } + + return hda_dsp_core_run(sdev, core_mask); +} + +int hda_dsp_core_reset_power_down(struct snd_sof_dev *sdev, + unsigned int core_mask) +{ + struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata; + const struct sof_intel_dsp_desc *chip = hda->desc; + int ret; + + /* restrict core_mask to host managed cores mask */ + core_mask &= chip->host_managed_cores_mask; + + /* return if core_mask is not valid */ + if (!core_mask) + return 0; + + /* place core in reset prior to power down */ + ret = hda_dsp_core_stall_reset(sdev, core_mask); + if (ret < 0) { + dev_err(sdev->dev, "error: dsp core reset failed: core_mask %x\n", + core_mask); + return ret; + } + + /* power down core */ + ret = hda_dsp_core_power_down(sdev, core_mask); + if (ret < 0) { + dev_err(sdev->dev, "error: dsp core power down fail mask %x: %d\n", + core_mask, ret); + return ret; + } + + /* make sure we are in OFF state */ + if (hda_dsp_core_is_enabled(sdev, core_mask)) { + dev_err(sdev->dev, "error: dsp core disable fail mask %x: %d\n", + core_mask, ret); + ret = -EIO; + } + + return ret; +} + +void hda_dsp_ipc_int_enable(struct snd_sof_dev *sdev) +{ + struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata; + const struct sof_intel_dsp_desc *chip = hda->desc; + + /* enable IPC DONE and BUSY interrupts */ + snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, chip->ipc_ctl, + HDA_DSP_REG_HIPCCTL_DONE | HDA_DSP_REG_HIPCCTL_BUSY, + HDA_DSP_REG_HIPCCTL_DONE | HDA_DSP_REG_HIPCCTL_BUSY); + + /* enable IPC interrupt */ + snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, HDA_DSP_REG_ADSPIC, + HDA_DSP_ADSPIC_IPC, HDA_DSP_ADSPIC_IPC); +} + +void hda_dsp_ipc_int_disable(struct snd_sof_dev *sdev) +{ + struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata; + const struct sof_intel_dsp_desc *chip = hda->desc; + + /* disable IPC interrupt */ + snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, HDA_DSP_REG_ADSPIC, + HDA_DSP_ADSPIC_IPC, 0); + + /* disable IPC BUSY and DONE interrupt */ + snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, chip->ipc_ctl, + HDA_DSP_REG_HIPCCTL_BUSY | HDA_DSP_REG_HIPCCTL_DONE, 0); +} + +static int hda_dsp_wait_d0i3c_done(struct snd_sof_dev *sdev) +{ + struct hdac_bus *bus = sof_to_bus(sdev); + int retry = HDA_DSP_REG_POLL_RETRY_COUNT; + + while (snd_hdac_chip_readb(bus, VS_D0I3C) & SOF_HDA_VS_D0I3C_CIP) { + if (!retry--) + return -ETIMEDOUT; + usleep_range(10, 15); + } + + return 0; +} + +static int hda_dsp_send_pm_gate_ipc(struct snd_sof_dev *sdev, u32 flags) +{ + struct sof_ipc_pm_gate pm_gate; + struct sof_ipc_reply reply; + + memset(&pm_gate, 0, sizeof(pm_gate)); + + /* configure pm_gate ipc message */ + pm_gate.hdr.size = sizeof(pm_gate); + pm_gate.hdr.cmd = SOF_IPC_GLB_PM_MSG | SOF_IPC_PM_GATE; + pm_gate.flags = flags; + + /* send pm_gate ipc to dsp */ + return sof_ipc_tx_message_no_pm(sdev->ipc, pm_gate.hdr.cmd, + &pm_gate, sizeof(pm_gate), &reply, + sizeof(reply)); +} + +static int hda_dsp_update_d0i3c_register(struct snd_sof_dev *sdev, u8 value) +{ + struct hdac_bus *bus = sof_to_bus(sdev); + int ret; + + /* Write to D0I3C after Command-In-Progress bit is cleared */ + ret = hda_dsp_wait_d0i3c_done(sdev); + if (ret < 0) { + dev_err(bus->dev, "CIP timeout before D0I3C update!\n"); + return ret; + } + + /* Update D0I3C register */ + snd_hdac_chip_updateb(bus, VS_D0I3C, SOF_HDA_VS_D0I3C_I3, value); + + /* Wait for cmd in progress to be cleared before exiting the function */ + ret = hda_dsp_wait_d0i3c_done(sdev); + if (ret < 0) { + dev_err(bus->dev, "CIP timeout after D0I3C update!\n"); + return ret; + } + + dev_vdbg(bus->dev, "D0I3C updated, register = 0x%x\n", + snd_hdac_chip_readb(bus, VS_D0I3C)); + + return 0; +} + +static int hda_dsp_set_D0_state(struct snd_sof_dev *sdev, + const struct sof_dsp_power_state *target_state) +{ + u32 flags = 0; + int ret; + u8 value = 0; + + /* + * Sanity check for illegal state transitions + * The only allowed transitions are: + * 1. D3 -> D0I0 + * 2. D0I0 -> D0I3 + * 3. D0I3 -> D0I0 + */ + switch (sdev->dsp_power_state.state) { + case SOF_DSP_PM_D0: + /* Follow the sequence below for D0 substate transitions */ + break; + case SOF_DSP_PM_D3: + /* Follow regular flow for D3 -> D0 transition */ + return 0; + default: + dev_err(sdev->dev, "error: transition from %d to %d not allowed\n", + sdev->dsp_power_state.state, target_state->state); + return -EINVAL; + } + + /* Set flags and register value for D0 target substate */ + if (target_state->substate == SOF_HDA_DSP_PM_D0I3) { + value = SOF_HDA_VS_D0I3C_I3; + + /* + * Trace DMA need to be disabled when the DSP enters + * D0I3 for S0Ix suspend, but it can be kept enabled + * when the DSP enters D0I3 while the system is in S0 + * for debug purpose. + */ + if (!sdev->dtrace_is_supported || + !hda_enable_trace_D0I3_S0 || + sdev->system_suspend_target != SOF_SUSPEND_NONE) + flags = HDA_PM_NO_DMA_TRACE; + } else { + /* prevent power gating in D0I0 */ + flags = HDA_PM_PPG; + } + + /* update D0I3C register */ + ret = hda_dsp_update_d0i3c_register(sdev, value); + if (ret < 0) + return ret; + + /* + * Notify the DSP of the state change. + * If this IPC fails, revert the D0I3C register update in order + * to prevent partial state change. + */ + ret = hda_dsp_send_pm_gate_ipc(sdev, flags); + if (ret < 0) { + dev_err(sdev->dev, + "error: PM_GATE ipc error %d\n", ret); + goto revert; + } + + return ret; + +revert: + /* fallback to the previous register value */ + value = value ? 0 : SOF_HDA_VS_D0I3C_I3; + + /* + * This can fail but return the IPC error to signal that + * the state change failed. + */ + hda_dsp_update_d0i3c_register(sdev, value); + + return ret; +} + +/* helper to log DSP state */ +static void hda_dsp_state_log(struct snd_sof_dev *sdev) +{ + switch (sdev->dsp_power_state.state) { + case SOF_DSP_PM_D0: + switch (sdev->dsp_power_state.substate) { + case SOF_HDA_DSP_PM_D0I0: + dev_dbg(sdev->dev, "Current DSP power state: D0I0\n"); + break; + case SOF_HDA_DSP_PM_D0I3: + dev_dbg(sdev->dev, "Current DSP power state: D0I3\n"); + break; + default: + dev_dbg(sdev->dev, "Unknown DSP D0 substate: %d\n", + sdev->dsp_power_state.substate); + break; + } + break; + case SOF_DSP_PM_D1: + dev_dbg(sdev->dev, "Current DSP power state: D1\n"); + break; + case SOF_DSP_PM_D2: + dev_dbg(sdev->dev, "Current DSP power state: D2\n"); + break; + case SOF_DSP_PM_D3_HOT: + dev_dbg(sdev->dev, "Current DSP power state: D3_HOT\n"); + break; + case SOF_DSP_PM_D3: + dev_dbg(sdev->dev, "Current DSP power state: D3\n"); + break; + case SOF_DSP_PM_D3_COLD: + dev_dbg(sdev->dev, "Current DSP power state: D3_COLD\n"); + break; + default: + dev_dbg(sdev->dev, "Unknown DSP power state: %d\n", + sdev->dsp_power_state.state); + break; + } +} + +/* + * All DSP power state transitions are initiated by the driver. + * If the requested state change fails, the error is simply returned. + * Further state transitions are attempted only when the set_power_save() op + * is called again either because of a new IPC sent to the DSP or + * during system suspend/resume. + */ +int hda_dsp_set_power_state(struct snd_sof_dev *sdev, + const struct sof_dsp_power_state *target_state) +{ + int ret = 0; + + /* + * When the DSP is already in D0I3 and the target state is D0I3, + * it could be the case that the DSP is in D0I3 during S0 + * and the system is suspending to S0Ix. Therefore, + * hda_dsp_set_D0_state() must be called to disable trace DMA + * by sending the PM_GATE IPC to the FW. + */ + if (target_state->substate == SOF_HDA_DSP_PM_D0I3 && + sdev->system_suspend_target == SOF_SUSPEND_S0IX) + goto set_state; + + /* + * For all other cases, return without doing anything if + * the DSP is already in the target state. + */ + if (target_state->state == sdev->dsp_power_state.state && + target_state->substate == sdev->dsp_power_state.substate) + return 0; + +set_state: + switch (target_state->state) { + case SOF_DSP_PM_D0: + ret = hda_dsp_set_D0_state(sdev, target_state); + break; + case SOF_DSP_PM_D3: + /* The only allowed transition is: D0I0 -> D3 */ + if (sdev->dsp_power_state.state == SOF_DSP_PM_D0 && + sdev->dsp_power_state.substate == SOF_HDA_DSP_PM_D0I0) + break; + + dev_err(sdev->dev, + "error: transition from %d to %d not allowed\n", + sdev->dsp_power_state.state, target_state->state); + return -EINVAL; + default: + dev_err(sdev->dev, "error: target state unsupported %d\n", + target_state->state); + return -EINVAL; + } + if (ret < 0) { + dev_err(sdev->dev, + "failed to set requested target DSP state %d substate %d\n", + target_state->state, target_state->substate); + return ret; + } + + sdev->dsp_power_state = *target_state; + hda_dsp_state_log(sdev); + return ret; +} + +/* + * Audio DSP states may transform as below:- + * + * Opportunistic D0I3 in S0 + * Runtime +---------------------+ Delayed D0i3 work timeout + * suspend | +--------------------+ + * +------------+ D0I0(active) | | + * | | <---------------+ | + * | +--------> | New IPC | | + * | |Runtime +--^--+---------^--+--+ (via mailbox) | | + * | |resume | | | | | | + * | | | | | | | | + * | | System| | | | | | + * | | resume| | S3/S0IX | | | | + * | | | | suspend | | S0IX | | + * | | | | | |suspend | | + * | | | | | | | | + * | | | | | | | | + * +-v---+-----------+--v-------+ | | +------+----v----+ + * | | | +-----------> | + * | D3 (suspended) | | | D0I3 | + * | | +--------------+ | + * | | System resume | | + * +----------------------------+ +----------------+ + * + * S0IX suspend: The DSP is in D0I3 if any D0I3-compatible streams + * ignored the suspend trigger. Otherwise the DSP + * is in D3. + */ + +static int hda_suspend(struct snd_sof_dev *sdev, bool runtime_suspend) +{ + struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata; + const struct sof_intel_dsp_desc *chip = hda->desc; +#if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA) + struct hdac_bus *bus = sof_to_bus(sdev); +#endif + int ret; + + hda_sdw_int_enable(sdev, false); + + /* disable IPC interrupts */ + hda_dsp_ipc_int_disable(sdev); + +#if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA) + if (runtime_suspend) + hda_codec_jack_wake_enable(sdev); + + /* power down all hda link */ + snd_hdac_ext_bus_link_power_down_all(bus); +#endif + + /* power down DSP */ + ret = hda_dsp_core_reset_power_down(sdev, chip->host_managed_cores_mask); + if (ret < 0) { + dev_err(sdev->dev, + "error: failed to power down core during suspend\n"); + return ret; + } + + /* disable ppcap interrupt */ + hda_dsp_ctrl_ppcap_enable(sdev, false); + hda_dsp_ctrl_ppcap_int_enable(sdev, false); + + /* disable hda bus irq and streams */ + hda_dsp_ctrl_stop_chip(sdev); + + /* disable LP retention mode */ + snd_sof_pci_update_bits(sdev, PCI_PGCTL, + PCI_PGCTL_LSRMD_MASK, PCI_PGCTL_LSRMD_MASK); + + /* reset controller */ + ret = hda_dsp_ctrl_link_reset(sdev, true); + if (ret < 0) { + dev_err(sdev->dev, + "error: failed to reset controller during suspend\n"); + return ret; + } + + /* display codec can powered off after link reset */ + hda_codec_i915_display_power(sdev, false); + + return 0; +} + +static int hda_resume(struct snd_sof_dev *sdev, bool runtime_resume) +{ +#if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA) + struct hdac_bus *bus = sof_to_bus(sdev); + struct hdac_ext_link *hlink = NULL; +#endif + int ret; + + /* display codec must be powered before link reset */ + hda_codec_i915_display_power(sdev, true); + + /* + * clear TCSEL to clear playback on some HD Audio + * codecs. PCI TCSEL is defined in the Intel manuals. + */ + snd_sof_pci_update_bits(sdev, PCI_TCSEL, 0x07, 0); + + /* reset and start hda controller */ + ret = hda_dsp_ctrl_init_chip(sdev, true); + if (ret < 0) { + dev_err(sdev->dev, + "error: failed to start controller after resume\n"); + return ret; + } + +#if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA) + /* check jack status */ + if (runtime_resume) { + if (sdev->system_suspend_target == SOF_SUSPEND_NONE) + hda_codec_jack_check(sdev); + } + + /* turn off the links that were off before suspend */ + list_for_each_entry(hlink, &bus->hlink_list, list) { + if (!hlink->ref_count) + snd_hdac_ext_bus_link_power_down(hlink); + } + + /* check dma status and clean up CORB/RIRB buffers */ + if (!bus->cmd_dma_state) + snd_hdac_bus_stop_cmd_io(bus); +#endif + + /* enable ppcap interrupt */ + hda_dsp_ctrl_ppcap_enable(sdev, true); + hda_dsp_ctrl_ppcap_int_enable(sdev, true); + + return 0; +} + +int hda_dsp_resume(struct snd_sof_dev *sdev) +{ + struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata; + struct pci_dev *pci = to_pci_dev(sdev->dev); + const struct sof_dsp_power_state target_state = { + .state = SOF_DSP_PM_D0, + .substate = SOF_HDA_DSP_PM_D0I0, + }; +#if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA) + struct hdac_bus *bus = sof_to_bus(sdev); + struct hdac_ext_link *hlink = NULL; +#endif + int ret; + + /* resume from D0I3 */ + if (sdev->dsp_power_state.state == SOF_DSP_PM_D0) { + hda_codec_i915_display_power(sdev, true); + +#if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA) + /* power up links that were active before suspend */ + list_for_each_entry(hlink, &bus->hlink_list, list) { + if (hlink->ref_count) { + ret = snd_hdac_ext_bus_link_power_up(hlink); + if (ret < 0) { + dev_dbg(sdev->dev, + "error %x in %s: failed to power up links", + ret, __func__); + return ret; + } + } + } + + /* set up CORB/RIRB buffers if was on before suspend */ + if (bus->cmd_dma_state) + snd_hdac_bus_init_cmd_io(bus); +#endif + + /* Set DSP power state */ + ret = snd_sof_dsp_set_power_state(sdev, &target_state); + if (ret < 0) { + dev_err(sdev->dev, "error: setting dsp state %d substate %d\n", + target_state.state, target_state.substate); + return ret; + } + + /* restore L1SEN bit */ + if (hda->l1_support_changed) + snd_sof_dsp_update_bits(sdev, HDA_DSP_HDA_BAR, + HDA_VS_INTEL_EM2, + HDA_VS_INTEL_EM2_L1SEN, 0); + + /* restore and disable the system wakeup */ + pci_restore_state(pci); + disable_irq_wake(pci->irq); + return 0; + } + + /* init hda controller. DSP cores will be powered up during fw boot */ + ret = hda_resume(sdev, false); + if (ret < 0) + return ret; + + return snd_sof_dsp_set_power_state(sdev, &target_state); +} + +int hda_dsp_runtime_resume(struct snd_sof_dev *sdev) +{ + const struct sof_dsp_power_state target_state = { + .state = SOF_DSP_PM_D0, + }; + int ret; + + /* init hda controller. DSP cores will be powered up during fw boot */ + ret = hda_resume(sdev, true); + if (ret < 0) + return ret; + + return snd_sof_dsp_set_power_state(sdev, &target_state); +} + +int hda_dsp_runtime_idle(struct snd_sof_dev *sdev) +{ + struct hdac_bus *hbus = sof_to_bus(sdev); + + if (hbus->codec_powered) { + dev_dbg(sdev->dev, "some codecs still powered (%08X), not idle\n", + (unsigned int)hbus->codec_powered); + return -EBUSY; + } + + return 0; +} + +int hda_dsp_runtime_suspend(struct snd_sof_dev *sdev) +{ + struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata; + const struct sof_dsp_power_state target_state = { + .state = SOF_DSP_PM_D3, + }; + int ret; + + /* cancel any attempt for DSP D0I3 */ + cancel_delayed_work_sync(&hda->d0i3_work); + + /* stop hda controller and power dsp off */ + ret = hda_suspend(sdev, true); + if (ret < 0) + return ret; + + return snd_sof_dsp_set_power_state(sdev, &target_state); +} + +int hda_dsp_suspend(struct snd_sof_dev *sdev, u32 target_state) +{ + struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata; + struct hdac_bus *bus = sof_to_bus(sdev); + struct pci_dev *pci = to_pci_dev(sdev->dev); + const struct sof_dsp_power_state target_dsp_state = { + .state = target_state, + .substate = target_state == SOF_DSP_PM_D0 ? + SOF_HDA_DSP_PM_D0I3 : 0, + }; + int ret; + + /* cancel any attempt for DSP D0I3 */ + cancel_delayed_work_sync(&hda->d0i3_work); + + if (target_state == SOF_DSP_PM_D0) { + /* we can't keep a wakeref to display driver at suspend */ + hda_codec_i915_display_power(sdev, false); + + /* Set DSP power state */ + ret = snd_sof_dsp_set_power_state(sdev, &target_dsp_state); + if (ret < 0) { + dev_err(sdev->dev, "error: setting dsp state %d substate %d\n", + target_dsp_state.state, + target_dsp_state.substate); + return ret; + } + + /* enable L1SEN to make sure the system can enter S0Ix */ + hda->l1_support_changed = + snd_sof_dsp_update_bits(sdev, HDA_DSP_HDA_BAR, + HDA_VS_INTEL_EM2, + HDA_VS_INTEL_EM2_L1SEN, + HDA_VS_INTEL_EM2_L1SEN); + +#if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA) + /* stop the CORB/RIRB DMA if it is On */ + if (bus->cmd_dma_state) + snd_hdac_bus_stop_cmd_io(bus); + + /* no link can be powered in s0ix state */ + ret = snd_hdac_ext_bus_link_power_down_all(bus); + if (ret < 0) { + dev_dbg(sdev->dev, + "error %d in %s: failed to power down links", + ret, __func__); + return ret; + } +#endif + + /* enable the system waking up via IPC IRQ */ + enable_irq_wake(pci->irq); + pci_save_state(pci); + return 0; + } + + /* stop hda controller and power dsp off */ + ret = hda_suspend(sdev, false); + if (ret < 0) { + dev_err(bus->dev, "error: suspending dsp\n"); + return ret; + } + + return snd_sof_dsp_set_power_state(sdev, &target_dsp_state); +} + +int hda_dsp_set_hw_params_upon_resume(struct snd_sof_dev *sdev) +{ +#if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA) + struct hdac_bus *bus = sof_to_bus(sdev); + struct snd_soc_pcm_runtime *rtd; + struct hdac_ext_stream *stream; + struct hdac_ext_link *link; + struct hdac_stream *s; + const char *name; + int stream_tag; + + /* set internal flag for BE */ + list_for_each_entry(s, &bus->stream_list, list) { + stream = stream_to_hdac_ext_stream(s); + + /* + * clear stream. This should already be taken care for running + * streams when the SUSPEND trigger is called. But paused + * streams do not get suspended, so this needs to be done + * explicitly during suspend. + */ + if (stream->link_substream) { + rtd = asoc_substream_to_rtd(stream->link_substream); + name = asoc_rtd_to_codec(rtd, 0)->component->name; + link = snd_hdac_ext_bus_get_link(bus, name); + if (!link) + return -EINVAL; + + stream->link_prepared = 0; + + if (hdac_stream(stream)->direction == + SNDRV_PCM_STREAM_CAPTURE) + continue; + + stream_tag = hdac_stream(stream)->stream_tag; + snd_hdac_ext_link_clear_stream_id(link, stream_tag); + } + } +#endif + return 0; +} + +void hda_dsp_d0i3_work(struct work_struct *work) +{ + struct sof_intel_hda_dev *hdev = container_of(work, + struct sof_intel_hda_dev, + d0i3_work.work); + struct hdac_bus *bus = &hdev->hbus.core; + struct snd_sof_dev *sdev = dev_get_drvdata(bus->dev); + struct sof_dsp_power_state target_state; + int ret; + + target_state.state = SOF_DSP_PM_D0; + + /* DSP can enter D0I3 iff only D0I3-compatible streams are active */ + if (snd_sof_dsp_only_d0i3_compatible_stream_active(sdev)) + target_state.substate = SOF_HDA_DSP_PM_D0I3; + else + target_state.substate = SOF_HDA_DSP_PM_D0I0; + + /* remain in D0I0 */ + if (target_state.substate == SOF_HDA_DSP_PM_D0I0) + return; + + /* This can fail but error cannot be propagated */ + ret = snd_sof_dsp_set_power_state(sdev, &target_state); + if (ret < 0) + dev_err_ratelimited(sdev->dev, + "error: failed to set DSP state %d substate %d\n", + target_state.state, target_state.substate); +} |