From 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 12:05:51 +0200 Subject: Adding upstream version 5.10.209. Signed-off-by: Daniel Baumann --- Documentation/dev-tools/kunit/usage.rst | 617 ++++++++++++++++++++++++++++++++ 1 file changed, 617 insertions(+) create mode 100644 Documentation/dev-tools/kunit/usage.rst (limited to 'Documentation/dev-tools/kunit/usage.rst') diff --git a/Documentation/dev-tools/kunit/usage.rst b/Documentation/dev-tools/kunit/usage.rst new file mode 100644 index 000000000..9c28c518e --- /dev/null +++ b/Documentation/dev-tools/kunit/usage.rst @@ -0,0 +1,617 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=========== +Using KUnit +=========== + +The purpose of this document is to describe what KUnit is, how it works, how it +is intended to be used, and all the concepts and terminology that are needed to +understand it. This guide assumes a working knowledge of the Linux kernel and +some basic knowledge of testing. + +For a high level introduction to KUnit, including setting up KUnit for your +project, see :doc:`start`. + +Organization of this document +============================= + +This document is organized into two main sections: Testing and Isolating +Behavior. The first covers what unit tests are and how to use KUnit to write +them. The second covers how to use KUnit to isolate code and make it possible +to unit test code that was otherwise un-unit-testable. + +Testing +======= + +What is KUnit? +-------------- + +"K" is short for "kernel" so "KUnit" is the "(Linux) Kernel Unit Testing +Framework." KUnit is intended first and foremost for writing unit tests; it is +general enough that it can be used to write integration tests; however, this is +a secondary goal. KUnit has no ambition of being the only testing framework for +the kernel; for example, it does not intend to be an end-to-end testing +framework. + +What is Unit Testing? +--------------------- + +A `unit test `_ is a test that +tests code at the smallest possible scope, a *unit* of code. In the C +programming language that's a function. + +Unit tests should be written for all the publicly exposed functions in a +compilation unit; so that is all the functions that are exported in either a +*class* (defined below) or all functions which are **not** static. + +Writing Tests +------------- + +Test Cases +~~~~~~~~~~ + +The fundamental unit in KUnit is the test case. A test case is a function with +the signature ``void (*)(struct kunit *test)``. It calls a function to be tested +and then sets *expectations* for what should happen. For example: + +.. code-block:: c + + void example_test_success(struct kunit *test) + { + } + + void example_test_failure(struct kunit *test) + { + KUNIT_FAIL(test, "This test never passes."); + } + +In the above example ``example_test_success`` always passes because it does +nothing; no expectations are set, so all expectations pass. On the other hand +``example_test_failure`` always fails because it calls ``KUNIT_FAIL``, which is +a special expectation that logs a message and causes the test case to fail. + +Expectations +~~~~~~~~~~~~ +An *expectation* is a way to specify that you expect a piece of code to do +something in a test. An expectation is called like a function. A test is made +by setting expectations about the behavior of a piece of code under test; when +one or more of the expectations fail, the test case fails and information about +the failure is logged. For example: + +.. code-block:: c + + void add_test_basic(struct kunit *test) + { + KUNIT_EXPECT_EQ(test, 1, add(1, 0)); + KUNIT_EXPECT_EQ(test, 2, add(1, 1)); + } + +In the above example ``add_test_basic`` makes a number of assertions about the +behavior of a function called ``add``; the first parameter is always of type +``struct kunit *``, which contains information about the current test context; +the second parameter, in this case, is what the value is expected to be; the +last value is what the value actually is. If ``add`` passes all of these +expectations, the test case, ``add_test_basic`` will pass; if any one of these +expectations fails, the test case will fail. + +It is important to understand that a test case *fails* when any expectation is +violated; however, the test will continue running, potentially trying other +expectations until the test case ends or is otherwise terminated. This is as +opposed to *assertions* which are discussed later. + +To learn about more expectations supported by KUnit, see :doc:`api/test`. + +.. note:: + A single test case should be pretty short, pretty easy to understand, + focused on a single behavior. + +For example, if we wanted to properly test the add function above, we would +create additional tests cases which would each test a different property that an +add function should have like this: + +.. code-block:: c + + void add_test_basic(struct kunit *test) + { + KUNIT_EXPECT_EQ(test, 1, add(1, 0)); + KUNIT_EXPECT_EQ(test, 2, add(1, 1)); + } + + void add_test_negative(struct kunit *test) + { + KUNIT_EXPECT_EQ(test, 0, add(-1, 1)); + } + + void add_test_max(struct kunit *test) + { + KUNIT_EXPECT_EQ(test, INT_MAX, add(0, INT_MAX)); + KUNIT_EXPECT_EQ(test, -1, add(INT_MAX, INT_MIN)); + } + + void add_test_overflow(struct kunit *test) + { + KUNIT_EXPECT_EQ(test, INT_MIN, add(INT_MAX, 1)); + } + +Notice how it is immediately obvious what all the properties that we are testing +for are. + +Assertions +~~~~~~~~~~ + +KUnit also has the concept of an *assertion*. An assertion is just like an +expectation except the assertion immediately terminates the test case if it is +not satisfied. + +For example: + +.. code-block:: c + + static void mock_test_do_expect_default_return(struct kunit *test) + { + struct mock_test_context *ctx = test->priv; + struct mock *mock = ctx->mock; + int param0 = 5, param1 = -5; + const char *two_param_types[] = {"int", "int"}; + const void *two_params[] = {¶m0, ¶m1}; + const void *ret; + + ret = mock->do_expect(mock, + "test_printk", test_printk, + two_param_types, two_params, + ARRAY_SIZE(two_params)); + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ret); + KUNIT_EXPECT_EQ(test, -4, *((int *) ret)); + } + +In this example, the method under test should return a pointer to a value, so +if the pointer returned by the method is null or an errno, we don't want to +bother continuing the test since the following expectation could crash the test +case. `ASSERT_NOT_ERR_OR_NULL(...)` allows us to bail out of the test case if +the appropriate conditions have not been satisfied to complete the test. + +Test Suites +~~~~~~~~~~~ + +Now obviously one unit test isn't very helpful; the power comes from having +many test cases covering all of a unit's behaviors. Consequently it is common +to have many *similar* tests; in order to reduce duplication in these closely +related tests most unit testing frameworks - including KUnit - provide the +concept of a *test suite*. A *test suite* is just a collection of test cases +for a unit of code with a set up function that gets invoked before every test +case and then a tear down function that gets invoked after every test case +completes. + +Example: + +.. code-block:: c + + static struct kunit_case example_test_cases[] = { + KUNIT_CASE(example_test_foo), + KUNIT_CASE(example_test_bar), + KUNIT_CASE(example_test_baz), + {} + }; + + static struct kunit_suite example_test_suite = { + .name = "example", + .init = example_test_init, + .exit = example_test_exit, + .test_cases = example_test_cases, + }; + kunit_test_suite(example_test_suite); + +In the above example the test suite, ``example_test_suite``, would run the test +cases ``example_test_foo``, ``example_test_bar``, and ``example_test_baz``; +each would have ``example_test_init`` called immediately before it and would +have ``example_test_exit`` called immediately after it. +``kunit_test_suite(example_test_suite)`` registers the test suite with the +KUnit test framework. + +.. note:: + A test case will only be run if it is associated with a test suite. + +``kunit_test_suite(...)`` is a macro which tells the linker to put the specified +test suite in a special linker section so that it can be run by KUnit either +after late_init, or when the test module is loaded (depending on whether the +test was built in or not). + +For more information on these types of things see the :doc:`api/test`. + +Isolating Behavior +================== + +The most important aspect of unit testing that other forms of testing do not +provide is the ability to limit the amount of code under test to a single unit. +In practice, this is only possible by being able to control what code gets run +when the unit under test calls a function and this is usually accomplished +through some sort of indirection where a function is exposed as part of an API +such that the definition of that function can be changed without affecting the +rest of the code base. In the kernel this primarily comes from two constructs, +classes, structs that contain function pointers that are provided by the +implementer, and architecture-specific functions which have definitions selected +at compile time. + +Classes +------- + +Classes are not a construct that is built into the C programming language; +however, it is an easily derived concept. Accordingly, pretty much every project +that does not use a standardized object oriented library (like GNOME's GObject) +has their own slightly different way of doing object oriented programming; the +Linux kernel is no exception. + +The central concept in kernel object oriented programming is the class. In the +kernel, a *class* is a struct that contains function pointers. This creates a +contract between *implementers* and *users* since it forces them to use the +same function signature without having to call the function directly. In order +for it to truly be a class, the function pointers must specify that a pointer +to the class, known as a *class handle*, be one of the parameters; this makes +it possible for the member functions (also known as *methods*) to have access +to member variables (more commonly known as *fields*) allowing the same +implementation to have multiple *instances*. + +Typically a class can be *overridden* by *child classes* by embedding the +*parent class* in the child class. Then when a method provided by the child +class is called, the child implementation knows that the pointer passed to it is +of a parent contained within the child; because of this, the child can compute +the pointer to itself because the pointer to the parent is always a fixed offset +from the pointer to the child; this offset is the offset of the parent contained +in the child struct. For example: + +.. code-block:: c + + struct shape { + int (*area)(struct shape *this); + }; + + struct rectangle { + struct shape parent; + int length; + int width; + }; + + int rectangle_area(struct shape *this) + { + struct rectangle *self = container_of(this, struct shape, parent); + + return self->length * self->width; + }; + + void rectangle_new(struct rectangle *self, int length, int width) + { + self->parent.area = rectangle_area; + self->length = length; + self->width = width; + } + +In this example (as in most kernel code) the operation of computing the pointer +to the child from the pointer to the parent is done by ``container_of``. + +Faking Classes +~~~~~~~~~~~~~~ + +In order to unit test a piece of code that calls a method in a class, the +behavior of the method must be controllable, otherwise the test ceases to be a +unit test and becomes an integration test. + +A fake just provides an implementation of a piece of code that is different than +what runs in a production instance, but behaves identically from the standpoint +of the callers; this is usually done to replace a dependency that is hard to +deal with, or is slow. + +A good example for this might be implementing a fake EEPROM that just stores the +"contents" in an internal buffer. For example, let's assume we have a class that +represents an EEPROM: + +.. code-block:: c + + struct eeprom { + ssize_t (*read)(struct eeprom *this, size_t offset, char *buffer, size_t count); + ssize_t (*write)(struct eeprom *this, size_t offset, const char *buffer, size_t count); + }; + +And we want to test some code that buffers writes to the EEPROM: + +.. code-block:: c + + struct eeprom_buffer { + ssize_t (*write)(struct eeprom_buffer *this, const char *buffer, size_t count); + int flush(struct eeprom_buffer *this); + size_t flush_count; /* Flushes when buffer exceeds flush_count. */ + }; + + struct eeprom_buffer *new_eeprom_buffer(struct eeprom *eeprom); + void destroy_eeprom_buffer(struct eeprom *eeprom); + +We can easily test this code by *faking out* the underlying EEPROM: + +.. code-block:: c + + struct fake_eeprom { + struct eeprom parent; + char contents[FAKE_EEPROM_CONTENTS_SIZE]; + }; + + ssize_t fake_eeprom_read(struct eeprom *parent, size_t offset, char *buffer, size_t count) + { + struct fake_eeprom *this = container_of(parent, struct fake_eeprom, parent); + + count = min(count, FAKE_EEPROM_CONTENTS_SIZE - offset); + memcpy(buffer, this->contents + offset, count); + + return count; + } + + ssize_t fake_eeprom_write(struct eeprom *parent, size_t offset, const char *buffer, size_t count) + { + struct fake_eeprom *this = container_of(parent, struct fake_eeprom, parent); + + count = min(count, FAKE_EEPROM_CONTENTS_SIZE - offset); + memcpy(this->contents + offset, buffer, count); + + return count; + } + + void fake_eeprom_init(struct fake_eeprom *this) + { + this->parent.read = fake_eeprom_read; + this->parent.write = fake_eeprom_write; + memset(this->contents, 0, FAKE_EEPROM_CONTENTS_SIZE); + } + +We can now use it to test ``struct eeprom_buffer``: + +.. code-block:: c + + struct eeprom_buffer_test { + struct fake_eeprom *fake_eeprom; + struct eeprom_buffer *eeprom_buffer; + }; + + static void eeprom_buffer_test_does_not_write_until_flush(struct kunit *test) + { + struct eeprom_buffer_test *ctx = test->priv; + struct eeprom_buffer *eeprom_buffer = ctx->eeprom_buffer; + struct fake_eeprom *fake_eeprom = ctx->fake_eeprom; + char buffer[] = {0xff}; + + eeprom_buffer->flush_count = SIZE_MAX; + + eeprom_buffer->write(eeprom_buffer, buffer, 1); + KUNIT_EXPECT_EQ(test, fake_eeprom->contents[0], 0); + + eeprom_buffer->write(eeprom_buffer, buffer, 1); + KUNIT_EXPECT_EQ(test, fake_eeprom->contents[1], 0); + + eeprom_buffer->flush(eeprom_buffer); + KUNIT_EXPECT_EQ(test, fake_eeprom->contents[0], 0xff); + KUNIT_EXPECT_EQ(test, fake_eeprom->contents[1], 0xff); + } + + static void eeprom_buffer_test_flushes_after_flush_count_met(struct kunit *test) + { + struct eeprom_buffer_test *ctx = test->priv; + struct eeprom_buffer *eeprom_buffer = ctx->eeprom_buffer; + struct fake_eeprom *fake_eeprom = ctx->fake_eeprom; + char buffer[] = {0xff}; + + eeprom_buffer->flush_count = 2; + + eeprom_buffer->write(eeprom_buffer, buffer, 1); + KUNIT_EXPECT_EQ(test, fake_eeprom->contents[0], 0); + + eeprom_buffer->write(eeprom_buffer, buffer, 1); + KUNIT_EXPECT_EQ(test, fake_eeprom->contents[0], 0xff); + KUNIT_EXPECT_EQ(test, fake_eeprom->contents[1], 0xff); + } + + static void eeprom_buffer_test_flushes_increments_of_flush_count(struct kunit *test) + { + struct eeprom_buffer_test *ctx = test->priv; + struct eeprom_buffer *eeprom_buffer = ctx->eeprom_buffer; + struct fake_eeprom *fake_eeprom = ctx->fake_eeprom; + char buffer[] = {0xff, 0xff}; + + eeprom_buffer->flush_count = 2; + + eeprom_buffer->write(eeprom_buffer, buffer, 1); + KUNIT_EXPECT_EQ(test, fake_eeprom->contents[0], 0); + + eeprom_buffer->write(eeprom_buffer, buffer, 2); + KUNIT_EXPECT_EQ(test, fake_eeprom->contents[0], 0xff); + KUNIT_EXPECT_EQ(test, fake_eeprom->contents[1], 0xff); + /* Should have only flushed the first two bytes. */ + KUNIT_EXPECT_EQ(test, fake_eeprom->contents[2], 0); + } + + static int eeprom_buffer_test_init(struct kunit *test) + { + struct eeprom_buffer_test *ctx; + + ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL); + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx); + + ctx->fake_eeprom = kunit_kzalloc(test, sizeof(*ctx->fake_eeprom), GFP_KERNEL); + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx->fake_eeprom); + fake_eeprom_init(ctx->fake_eeprom); + + ctx->eeprom_buffer = new_eeprom_buffer(&ctx->fake_eeprom->parent); + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx->eeprom_buffer); + + test->priv = ctx; + + return 0; + } + + static void eeprom_buffer_test_exit(struct kunit *test) + { + struct eeprom_buffer_test *ctx = test->priv; + + destroy_eeprom_buffer(ctx->eeprom_buffer); + } + +.. _kunit-on-non-uml: + +KUnit on non-UML architectures +============================== + +By default KUnit uses UML as a way to provide dependencies for code under test. +Under most circumstances KUnit's usage of UML should be treated as an +implementation detail of how KUnit works under the hood. Nevertheless, there +are instances where being able to run architecture-specific code or test +against real hardware is desirable. For these reasons KUnit supports running on +other architectures. + +Running existing KUnit tests on non-UML architectures +----------------------------------------------------- + +There are some special considerations when running existing KUnit tests on +non-UML architectures: + +* Hardware may not be deterministic, so a test that always passes or fails + when run under UML may not always do so on real hardware. +* Hardware and VM environments may not be hermetic. KUnit tries its best to + provide a hermetic environment to run tests; however, it cannot manage state + that it doesn't know about outside of the kernel. Consequently, tests that + may be hermetic on UML may not be hermetic on other architectures. +* Some features and tooling may not be supported outside of UML. +* Hardware and VMs are slower than UML. + +None of these are reasons not to run your KUnit tests on real hardware; they are +only things to be aware of when doing so. + +The biggest impediment will likely be that certain KUnit features and +infrastructure may not support your target environment. For example, at this +time the KUnit Wrapper (``tools/testing/kunit/kunit.py``) does not work outside +of UML. Unfortunately, there is no way around this. Using UML (or even just a +particular architecture) allows us to make a lot of assumptions that make it +possible to do things which might otherwise be impossible. + +Nevertheless, all core KUnit framework features are fully supported on all +architectures, and using them is straightforward: all you need to do is to take +your kunitconfig, your Kconfig options for the tests you would like to run, and +merge them into whatever config your are using for your platform. That's it! + +For example, let's say you have the following kunitconfig: + +.. code-block:: none + + CONFIG_KUNIT=y + CONFIG_KUNIT_EXAMPLE_TEST=y + +If you wanted to run this test on an x86 VM, you might add the following config +options to your ``.config``: + +.. code-block:: none + + CONFIG_KUNIT=y + CONFIG_KUNIT_EXAMPLE_TEST=y + CONFIG_SERIAL_8250=y + CONFIG_SERIAL_8250_CONSOLE=y + +All these new options do is enable support for a common serial console needed +for logging. + +Next, you could build a kernel with these tests as follows: + + +.. code-block:: bash + + make ARCH=x86 olddefconfig + make ARCH=x86 + +Once you have built a kernel, you could run it on QEMU as follows: + +.. code-block:: bash + + qemu-system-x86_64 -enable-kvm \ + -m 1024 \ + -kernel arch/x86_64/boot/bzImage \ + -append 'console=ttyS0' \ + --nographic + +Interspersed in the kernel logs you might see the following: + +.. code-block:: none + + TAP version 14 + # Subtest: example + 1..1 + # example_simple_test: initializing + ok 1 - example_simple_test + ok 1 - example + +Congratulations, you just ran a KUnit test on the x86 architecture! + +In a similar manner, kunit and kunit tests can also be built as modules, +so if you wanted to run tests in this way you might add the following config +options to your ``.config``: + +.. code-block:: none + + CONFIG_KUNIT=m + CONFIG_KUNIT_EXAMPLE_TEST=m + +Once the kernel is built and installed, a simple + +.. code-block:: bash + + modprobe example-test + +...will run the tests. + +.. note:: + Note that you should make sure your test depends on ``KUNIT=y`` in Kconfig + if the test does not support module build. Otherwise, it will trigger + compile errors if ``CONFIG_KUNIT`` is ``m``. + +Writing new tests for other architectures +----------------------------------------- + +The first thing you must do is ask yourself whether it is necessary to write a +KUnit test for a specific architecture, and then whether it is necessary to +write that test for a particular piece of hardware. In general, writing a test +that depends on having access to a particular piece of hardware or software (not +included in the Linux source repo) should be avoided at all costs. + +Even if you only ever plan on running your KUnit test on your hardware +configuration, other people may want to run your tests and may not have access +to your hardware. If you write your test to run on UML, then anyone can run your +tests without knowing anything about your particular setup, and you can still +run your tests on your hardware setup just by compiling for your architecture. + +.. important:: + Always prefer tests that run on UML to tests that only run under a particular + architecture, and always prefer tests that run under QEMU or another easy + (and monetarily free) to obtain software environment to a specific piece of + hardware. + +Nevertheless, there are still valid reasons to write an architecture or hardware +specific test: for example, you might want to test some code that really belongs +in ``arch/some-arch/*``. Even so, try your best to write the test so that it +does not depend on physical hardware: if some of your test cases don't need the +hardware, only require the hardware for tests that actually need it. + +Now that you have narrowed down exactly what bits are hardware specific, the +actual procedure for writing and running the tests is pretty much the same as +writing normal KUnit tests. One special caveat is that you have to reset +hardware state in between test cases; if this is not possible, you may only be +able to run one test case per invocation. + +.. TODO(brendanhiggins@google.com): Add an actual example of an architecture- + dependent KUnit test. + +KUnit debugfs representation +============================ +When kunit test suites are initialized, they create an associated directory +in ``/sys/kernel/debug/kunit/``. The directory contains one file + +- results: "cat results" displays results of each test case and the results + of the entire suite for the last test run. + +The debugfs representation is primarily of use when kunit test suites are +run in a native environment, either as modules or builtin. Having a way +to display results like this is valuable as otherwise results can be +intermixed with other events in dmesg output. The maximum size of each +results file is KUNIT_LOG_SIZE bytes (defined in ``include/kunit/test.h``). -- cgit v1.2.3