From 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 12:05:51 +0200 Subject: Adding upstream version 5.10.209. Signed-off-by: Daniel Baumann --- .../devicetree/bindings/iio/resolver/ad2s90.txt | 31 ++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/resolver/ad2s90.txt (limited to 'Documentation/devicetree/bindings/iio/resolver') diff --git a/Documentation/devicetree/bindings/iio/resolver/ad2s90.txt b/Documentation/devicetree/bindings/iio/resolver/ad2s90.txt new file mode 100644 index 000000000..477d41fa6 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/resolver/ad2s90.txt @@ -0,0 +1,31 @@ +Analog Devices AD2S90 Resolver-to-Digital Converter + +https://www.analog.com/en/products/ad2s90.html + +Required properties: + - compatible: should be "adi,ad2s90" + - reg: SPI chip select number for the device + - spi-max-frequency: set maximum clock frequency, must be 830000 + - spi-cpol and spi-cpha: + Either SPI mode (0,0) or (1,1) must be used, so specify none or both of + spi-cpha, spi-cpol. + +See for more details: + Documentation/devicetree/bindings/spi/spi-bus.txt + +Note about max frequency: + Chip's max frequency, as specified in its datasheet, is 2Mhz. But a 600ns + delay is expected between the application of a logic LO to CS and the + application of SCLK, as also specified. And since the delay is not + implemented in the spi code, to satisfy it, SCLK's period should be at most + 2 * 600ns, so the max frequency should be 1 / (2 * 6e-7), which gives + roughly 830000Hz. + +Example: +resolver@0 { + compatible = "adi,ad2s90"; + reg = <0>; + spi-max-frequency = <830000>; + spi-cpol; + spi-cpha; +}; -- cgit v1.2.3