From 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 12:05:51 +0200 Subject: Adding upstream version 5.10.209. Signed-off-by: Daniel Baumann --- .../devicetree/bindings/misc/aspeed,cvic.txt | 35 ++++ .../devicetree/bindings/misc/aspeed-p2a-ctrl.txt | 46 +++++ .../devicetree/bindings/misc/atmel-ssc.txt | 50 ++++++ .../devicetree/bindings/misc/brcm,kona-smc.txt | 15 ++ .../devicetree/bindings/misc/eeprom-93xx46.txt | 25 +++ .../devicetree/bindings/misc/fsl,dpaa2-console.txt | 11 ++ .../devicetree/bindings/misc/fsl,qoriq-mc.txt | 196 +++++++++++++++++++++ Documentation/devicetree/bindings/misc/ge-achc.txt | 26 +++ .../devicetree/bindings/misc/idt_89hpesx.txt | 44 +++++ Documentation/devicetree/bindings/misc/ifm-csi.txt | 41 +++++ .../misc/intel,ixp4xx-ahb-queue-manager.yaml | 51 ++++++ Documentation/devicetree/bindings/misc/lwn-bk4.txt | 26 +++ .../bindings/misc/nvidia,tegra186-misc.txt | 14 ++ .../bindings/misc/nvidia,tegra20-apbmisc.txt | 17 ++ .../devicetree/bindings/misc/olpc,xo1.75-ec.yaml | 56 ++++++ .../devicetree/bindings/misc/pvpanic-mmio.txt | 29 +++ .../devicetree/bindings/misc/qcom,fastrpc.txt | 78 ++++++++ .../devicetree/bindings/misc/xlnx,sd-fec.txt | 58 ++++++ 18 files changed, 818 insertions(+) create mode 100644 Documentation/devicetree/bindings/misc/aspeed,cvic.txt create mode 100644 Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt create mode 100644 Documentation/devicetree/bindings/misc/atmel-ssc.txt create mode 100644 Documentation/devicetree/bindings/misc/brcm,kona-smc.txt create mode 100644 Documentation/devicetree/bindings/misc/eeprom-93xx46.txt create mode 100644 Documentation/devicetree/bindings/misc/fsl,dpaa2-console.txt create mode 100644 Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt create mode 100644 Documentation/devicetree/bindings/misc/ge-achc.txt create mode 100644 Documentation/devicetree/bindings/misc/idt_89hpesx.txt create mode 100644 Documentation/devicetree/bindings/misc/ifm-csi.txt create mode 100644 Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml create mode 100644 Documentation/devicetree/bindings/misc/lwn-bk4.txt create mode 100644 Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.txt create mode 100644 Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt create mode 100644 Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml create mode 100644 Documentation/devicetree/bindings/misc/pvpanic-mmio.txt create mode 100644 Documentation/devicetree/bindings/misc/qcom,fastrpc.txt create mode 100644 Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt (limited to 'Documentation/devicetree/bindings/misc') diff --git a/Documentation/devicetree/bindings/misc/aspeed,cvic.txt b/Documentation/devicetree/bindings/misc/aspeed,cvic.txt new file mode 100644 index 000000000..d62c783d1 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/aspeed,cvic.txt @@ -0,0 +1,35 @@ +* ASPEED AST2400 and AST2500 coprocessor interrupt controller + +This file describes the bindings for the interrupt controller present +in the AST2400 and AST2500 BMC SoCs which provides interrupt to the +ColdFire coprocessor. + +It is not a normal interrupt controller and it would be rather +inconvenient to create an interrupt tree for it as it somewhat shares +some of the same sources as the main ARM interrupt controller but with +different numbers. + +The AST2500 supports a SW generated interrupt + +Required properties: +- reg: address and length of the register for the device. +- compatible: "aspeed,cvic" and one of: + "aspeed,ast2400-cvic" + or + "aspeed,ast2500-cvic" + +- valid-sources: One cell, bitmap of supported sources for the implementation + +Optional properties; +- copro-sw-interrupts: List of interrupt numbers that can be used as + SW interrupts from the ARM to the coprocessor. + (AST2500 only) + +Example: + + cvic: copro-interrupt-controller@1e6c2000 { + compatible = "aspeed,ast2500-cvic"; + valid-sources = <0xffffffff>; + copro-sw-interrupts = <1>; + reg = <0x1e6c2000 0x80>; + }; diff --git a/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt b/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt new file mode 100644 index 000000000..f2e2e28b3 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt @@ -0,0 +1,46 @@ +====================================================================== +Device tree bindings for Aspeed AST2400/AST2500 PCI-to-AHB Bridge Control Driver +====================================================================== + +The bridge is available on platforms with the VGA enabled on the Aspeed device. +In this case, the host has access to a 64KiB window into all of the BMC's +memory. The BMC can disable this bridge. If the bridge is enabled, the host +has read access to all the regions of memory, however the host only has read +and write access depending on a register controlled by the BMC. + +Required properties: +=================== + + - compatible: must be one of: + - "aspeed,ast2400-p2a-ctrl" + - "aspeed,ast2500-p2a-ctrl" + +Optional properties: +=================== + +- reg: A hint for the memory regions associated with the P2A controller +- memory-region: A phandle to a reserved_memory region to be used for the PCI + to AHB mapping + +The p2a-control node should be the child of a syscon node with the required +property: + +- compatible : Should be one of the following: + "aspeed,ast2400-scu", "syscon", "simple-mfd" + "aspeed,ast2500-scu", "syscon", "simple-mfd" + +Example +=================== + +g4 Example +---------- + +syscon: scu@1e6e2000 { + compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd"; + reg = <0x1e6e2000 0x1a8>; + + p2a: p2a-control { + compatible = "aspeed,ast2400-p2a-ctrl"; + memory-region = <&reserved_memory>; + }; +}; diff --git a/Documentation/devicetree/bindings/misc/atmel-ssc.txt b/Documentation/devicetree/bindings/misc/atmel-ssc.txt new file mode 100644 index 000000000..f9fb41264 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/atmel-ssc.txt @@ -0,0 +1,50 @@ +* Atmel SSC driver. + +Required properties: +- compatible: "atmel,at91rm9200-ssc" or "atmel,at91sam9g45-ssc" + - atmel,at91rm9200-ssc: support pdc transfer + - atmel,at91sam9g45-ssc: support dma transfer +- reg: Should contain SSC registers location and length +- interrupts: Should contain SSC interrupt +- clock-names: tuple listing input clock names. + Required elements: "pclk" +- clocks: phandles to input clocks. + + +Required properties for devices compatible with "atmel,at91sam9g45-ssc": +- dmas: DMA specifier, consisting of a phandle to DMA controller node, + the memory interface and SSC DMA channel ID (for tx and rx). + See Documentation/devicetree/bindings/dma/atmel-dma.txt for details. +- dma-names: Must be "tx", "rx". + +Optional properties: + - atmel,clk-from-rk-pin: bool property. + - When SSC works in slave mode, according to the hardware design, the + clock can get from TK pin, and also can get from RK pin. So, add + this parameter to choose where the clock from. + - By default the clock is from TK pin, if the clock from RK pin, this + property is needed. + - #sound-dai-cells: Should contain <0>. + - This property makes the SSC into an automatically registered DAI. + +Examples: +- PDC transfer: +ssc0: ssc@fffbc000 { + compatible = "atmel,at91rm9200-ssc"; + reg = <0xfffbc000 0x4000>; + interrupts = <14 4 5>; + clocks = <&ssc0_clk>; + clock-names = "pclk"; +}; + +- DMA transfer: +ssc0: ssc@f0010000 { + compatible = "atmel,at91sam9g45-ssc"; + reg = <0xf0010000 0x4000>; + interrupts = <28 4 5>; + dmas = <&dma0 1 13>, + <&dma0 1 14>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; +}; diff --git a/Documentation/devicetree/bindings/misc/brcm,kona-smc.txt b/Documentation/devicetree/bindings/misc/brcm,kona-smc.txt new file mode 100644 index 000000000..05b47232e --- /dev/null +++ b/Documentation/devicetree/bindings/misc/brcm,kona-smc.txt @@ -0,0 +1,15 @@ +Broadcom Secure Monitor Bounce buffer +----------------------------------------------------- +This binding defines the location of the bounce buffer +used for non-secure to secure communications. + +Required properties: +- compatible : "brcm,kona-smc" +- DEPRECATED: compatible : "bcm,kona-smc" +- reg : Location and size of bounce buffer + +Example: + smc@3404c000 { + compatible = "brcm,bcm11351-smc", "brcm,kona-smc"; + reg = <0x3404c000 0x400>; //1 KiB in SRAM + }; diff --git a/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt b/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt new file mode 100644 index 000000000..a8ebb4621 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt @@ -0,0 +1,25 @@ +EEPROMs (SPI) compatible with Microchip Technology 93xx46 family. + +Required properties: +- compatible : shall be one of: + "atmel,at93c46d" + "eeprom-93xx46" +- data-size : number of data bits per word (either 8 or 16) + +Optional properties: +- read-only : parameter-less property which disables writes to the EEPROM +- select-gpios : if present, specifies the GPIO that will be asserted prior to + each access to the EEPROM (e.g. for SPI bus multiplexing) + +Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt +apply. In particular, "reg" and "spi-max-frequency" properties must be given. + +Example: + eeprom@0 { + compatible = "eeprom-93xx46"; + reg = <0>; + spi-max-frequency = <1000000>; + spi-cs-high; + data-size = <8>; + select-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/misc/fsl,dpaa2-console.txt b/Documentation/devicetree/bindings/misc/fsl,dpaa2-console.txt new file mode 100644 index 000000000..1442ba5d2 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/fsl,dpaa2-console.txt @@ -0,0 +1,11 @@ +DPAA2 console support + +Required properties: + + - compatible + Value type: + Definition: Must be "fsl,dpaa2-console". + - reg + Value type: + Definition: A standard property. Specifies the region where the MCFBA + (MC firmware base address) register can be found. diff --git a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt new file mode 100644 index 000000000..7b486d498 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt @@ -0,0 +1,196 @@ +* Freescale Management Complex + +The Freescale Management Complex (fsl-mc) is a hardware resource +manager that manages specialized hardware objects used in +network-oriented packet processing applications. After the fsl-mc +block is enabled, pools of hardware resources are available, such as +queues, buffer pools, I/O interfaces. These resources are building +blocks that can be used to create functional hardware objects/devices +such as network interfaces, crypto accelerator instances, L2 switches, +etc. + +For an overview of the DPAA2 architecture and fsl-mc bus see: +Documentation/networking/device_drivers/ethernet/freescale/dpaa2/overview.rst + +As described in the above overview, all DPAA2 objects in a DPRC share the +same hardware "isolation context" and a 10-bit value called an ICID +(isolation context id) is expressed by the hardware to identify +the requester. + +The generic 'iommus' property is insufficient to describe the relationship +between ICIDs and IOMMUs, so an iommu-map property is used to define +the set of possible ICIDs under a root DPRC and how they map to +an IOMMU. + +For generic IOMMU bindings, see +Documentation/devicetree/bindings/iommu/iommu.txt. + +For arm-smmu binding, see: +Documentation/devicetree/bindings/iommu/arm,smmu.yaml. + +The MSI writes are accompanied by sideband data which is derived from the ICID. +The msi-map property is used to associate the devices with both the ITS +controller and the sideband data which accompanies the writes. + +For generic MSI bindings, see +Documentation/devicetree/bindings/interrupt-controller/msi.txt. + +For GICv3 and GIC ITS bindings, see: +Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml. + +Required properties: + + - compatible + Value type: + Definition: Must be "fsl,qoriq-mc". A Freescale Management Complex + compatible with this binding must have Block Revision + Registers BRR1 and BRR2 at offset 0x0BF8 and 0x0BFC in + the MC control register region. + + - reg + Value type: + Definition: A standard property. Specifies one or two regions + defining the MC's registers: + + -the first region is the command portal for the + this machine and must always be present + + -the second region is the MC control registers. This + region may not be present in some scenarios, such + as in the device tree presented to a virtual machine. + + - ranges + Value type: + Definition: A standard property. Defines the mapping between the child + MC address space and the parent system address space. + + The MC address space is defined by 3 components: + + + Valid values for region type are + 0x0 - MC portals + 0x1 - QBMAN portals + + - #address-cells + Value type: + Definition: Must be 3. (see definition in 'ranges' property) + + - #size-cells + Value type: + Definition: Must be 1. + +Sub-nodes: + + The fsl-mc node may optionally have dpmac sub-nodes that describe + the relationship between the Ethernet MACs which belong to the MC + and the Ethernet PHYs on the system board. + + The dpmac nodes must be under a node named "dpmacs" which contains + the following properties: + + - #address-cells + Value type: + Definition: Must be present if dpmac sub-nodes are defined and must + have a value of 1. + + - #size-cells + Value type: + Definition: Must be present if dpmac sub-nodes are defined and must + have a value of 0. + + These nodes must have the following properties: + + - compatible + Value type: + Definition: Must be "fsl,qoriq-mc-dpmac". + + - reg + Value type: + Definition: Specifies the id of the dpmac. + + - phy-handle + Value type: + Definition: Specifies the phandle to the PHY device node associated + with the this dpmac. +Optional properties: + +- iommu-map: Maps an ICID to an IOMMU and associated iommu-specifier + data. + + The property is an arbitrary number of tuples of + (icid-base,iommu,iommu-base,length). + + Any ICID i in the interval [icid-base, icid-base + length) is + associated with the listed IOMMU, with the iommu-specifier + (i - icid-base + iommu-base). + +- msi-map: Maps an ICID to a GIC ITS and associated msi-specifier + data. + + The property is an arbitrary number of tuples of + (icid-base,gic-its,msi-base,length). + + Any ICID in the interval [icid-base, icid-base + length) is + associated with the listed GIC ITS, with the msi-specifier + (i - icid-base + msi-base). + +Deprecated properties: + + - msi-parent + Value type: + Definition: Describes the MSI controller node handling message + interrupts for the MC. When there is no translation + between the ICID and deviceID this property can be used + to describe the MSI controller used by the devices on the + mc-bus. + The use of this property for mc-bus is deprecated. Please + use msi-map. + +Example: + + smmu: iommu@5000000 { + compatible = "arm,mmu-500"; + #iommu-cells = <1>; + stream-match-mask = <0x7C00>; + ... + }; + + gic: interrupt-controller@6000000 { + compatible = "arm,gic-v3"; + ... + } + its: gic-its@6020000 { + compatible = "arm,gic-v3-its"; + msi-controller; + ... + }; + + fsl_mc: fsl-mc@80c000000 { + compatible = "fsl,qoriq-mc"; + reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ + <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ + /* define map for ICIDs 23-64 */ + iommu-map = <23 &smmu 23 41>; + /* define msi map for ICIDs 23-64 */ + msi-map = <23 &its 23 41>; + #address-cells = <3>; + #size-cells = <1>; + + /* + * Region type 0x0 - MC portals + * Region type 0x1 - QBMAN portals + */ + ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000 + 0x1 0x0 0x0 0x8 0x18000000 0x8000000>; + + dpmacs { + #address-cells = <1>; + #size-cells = <0>; + + dpmac@1 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <1>; + phy-handle = <&mdio0_phy0>; + } + } + }; diff --git a/Documentation/devicetree/bindings/misc/ge-achc.txt b/Documentation/devicetree/bindings/misc/ge-achc.txt new file mode 100644 index 000000000..77df94d7a --- /dev/null +++ b/Documentation/devicetree/bindings/misc/ge-achc.txt @@ -0,0 +1,26 @@ +* GE Healthcare USB Management Controller + +A device which handles data aquisition from compatible USB based peripherals. +SPI is used for device management. + +Note: This device does not expose the peripherals as USB devices. + +Required properties: + +- compatible : Should be "ge,achc" + +Required SPI properties: + +- reg : Should be address of the device chip select within + the controller. + +- spi-max-frequency : Maximum SPI clocking speed of device in Hz, should be + 1MHz for the GE ACHC. + +Example: + +spidev0: spi@0 { + compatible = "ge,achc"; + reg = <0>; + spi-max-frequency = <1000000>; +}; diff --git a/Documentation/devicetree/bindings/misc/idt_89hpesx.txt b/Documentation/devicetree/bindings/misc/idt_89hpesx.txt new file mode 100644 index 000000000..b9093b79a --- /dev/null +++ b/Documentation/devicetree/bindings/misc/idt_89hpesx.txt @@ -0,0 +1,44 @@ +EEPROM / CSR SMBus-slave interface of IDT 89HPESx devices + +Required properties: + - compatible : should be "," + Basically there is only one manufacturer: idt, but some + compatible devices may be produced in future. Following devices + are supported: 89hpes8nt2, 89hpes12nt3, 89hpes24nt6ag2, + 89hpes32nt8ag2, 89hpes32nt8bg2, 89hpes12nt12g2, 89hpes16nt16g2, + 89hpes24nt24g2, 89hpes32nt24ag2, 89hpes32nt24bg2; + 89hpes12n3, 89hpes12n3a, 89hpes24n3, 89hpes24n3a; + 89hpes32h8, 89hpes32h8g2, 89hpes48h12, 89hpes48h12g2, + 89hpes48h12ag2, 89hpes16h16, 89hpes22h16, 89hpes22h16g2, + 89hpes34h16, 89hpes34h16g2, 89hpes64h16, 89hpes64h16g2, + 89hpes64h16ag2; + 89hpes12t3g2, 89hpes24t3g2, 89hpes16t4, 89hpes4t4g2, + 89hpes10t4g2, 89hpes16t4g2, 89hpes16t4ag2, 89hpes5t5, + 89hpes6t5, 89hpes8t5, 89hpes8t5a, 89hpes24t6, 89hpes6t6g2, + 89hpes24t6g2, 89hpes16t7, 89hpes32t8, 89hpes32t8g2, + 89hpes48t12, 89hpes48t12g2. + - reg : I2C address of the IDT 89HPESx device. + +Optionally there can be EEPROM-compatible subnode: + - compatible: There are five EEPROM devices supported: 24c32, 24c64, 24c128, + 24c256 and 24c512 differed by size. + - reg: Custom address of EEPROM device (If not specified IDT 89HPESx + (optional) device will try to communicate with EEPROM sited by default + address - 0x50) + - read-only : Parameterless property disables writes to the EEPROM + (optional) + +Example: + idt@60 { + compatible = "idt,89hpes32nt8ag2"; + reg = <0x74>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "onsemi,24c64"; + reg = <0x50>; + read-only; + }; + }; + diff --git a/Documentation/devicetree/bindings/misc/ifm-csi.txt b/Documentation/devicetree/bindings/misc/ifm-csi.txt new file mode 100644 index 000000000..5bdfffb0b --- /dev/null +++ b/Documentation/devicetree/bindings/misc/ifm-csi.txt @@ -0,0 +1,41 @@ +IFM camera sensor interface on mpc5200 LocalPlus bus + +Required properties: +- compatible: "ifm,o2d-csi" +- reg: specifies sensor chip select number and associated address range +- interrupts: external interrupt line number and interrupt sense mode + of the interrupt line signaling frame valid events +- gpios: three gpio-specifiers for "capture", "reset" and "master enable" + GPIOs (strictly in this order). +- ifm,csi-clk-handle: the phandle to a node in the DT describing the sensor + clock generator. This node is usually a general purpose timer controller. +- ifm,csi-addr-bus-width: address bus width (valid values are 16, 24, 25) +- ifm,csi-data-bus-width: data bus width (valid values are 8 and 16) +- ifm,csi-wait-cycles: sensor bus wait cycles + +Optional properties: +- ifm,csi-byte-swap: if this property is present, the byte swapping on + the bus will be enabled. + +Example: + + csi@3,0 { + compatible = "ifm,o2d-csi"; + reg = <3 0 0x00100000>; /* CS 3, 1 MiB range */ + interrupts = <1 1 2>; /* IRQ1, edge falling */ + + ifm,csi-clk-handle = <&timer7>; + gpios = <&gpio_simple 23 0 /* image_capture */ + &gpio_simple 26 0 /* image_reset */ + &gpio_simple 29 0>; /* image_master_en */ + + ifm,csi-addr-bus-width = <24>; + ifm,csi-data-bus-width = <8>; + ifm,csi-wait-cycles = <0>; + }; + +The base address of the used chip select is specified in the +ranges property of the parent localbus node, for example: + + ranges = <0 0 0xff000000 0x01000000 + 3 0 0xe3000000 0x00100000>; diff --git a/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml b/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml new file mode 100644 index 000000000..38ab04991 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Linaro Ltd. +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/misc/intel,ixp4xx-ahb-queue-manager.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Intel IXP4xx AHB Queue Manager + +maintainers: + - Linus Walleij + +description: | + The IXP4xx AHB Queue Manager maintains queues as circular buffers in + an 8KB embedded SRAM along with hardware pointers. It is used by both + the XScale processor and the NPEs (Network Processing Units) in the + IXP4xx for accelerating queues, especially for networking. Clients pick + queues from the queue manager with foo-queue = <&qmgr N> where the + &qmgr is a phandle to the queue manager and N is the queue resource + number. The queue resources available and their specific purpose + on a certain IXP4xx system will vary. + +properties: + compatible: + items: + - const: intel,ixp4xx-ahb-queue-manager + + reg: + maxItems: 1 + + interrupts: + items: + - description: Interrupt for queues 0-31 + - description: Interrupt for queues 32-63 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include + + qmgr: queue-manager@60000000 { + compatible = "intel,ixp4xx-ahb-queue-manager"; + reg = <0x60000000 0x4000>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH>, <4 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/misc/lwn-bk4.txt b/Documentation/devicetree/bindings/misc/lwn-bk4.txt new file mode 100644 index 000000000..d6a8c188c --- /dev/null +++ b/Documentation/devicetree/bindings/misc/lwn-bk4.txt @@ -0,0 +1,26 @@ +* Liebherr's BK4 controller external SPI + +A device which handles data acquisition from compatible industrial +peripherals. +The SPI is used for data and management purposes in both master and +slave modes. + +Required properties: + +- compatible : Should be "lwn,bk4" + +Required SPI properties: + +- reg : Should be address of the device chip select within + the controller. + +- spi-max-frequency : Maximum SPI clocking speed of device in Hz, should be + 30MHz at most for the Liebherr's BK4 external bus. + +Example: + +spidev0: spi@0 { + compatible = "lwn,bk4"; + spi-max-frequency = <30000000>; + reg = <0>; +}; diff --git a/Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.txt b/Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.txt new file mode 100644 index 000000000..43d777ed8 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.txt @@ -0,0 +1,14 @@ +NVIDIA Tegra186 (and later) MISC register block + +The MISC register block found on Tegra186 and later SoCs contains registers +that can be used to identify a given chip and various strapping options. + +Required properties: +- compatible: Must be: + - Tegra186: "nvidia,tegra186-misc" + - Tegra194: "nvidia,tegra194-misc" + - Tegra234: "nvidia,tegra234-misc" +- reg: Should contain 2 entries: The first entry gives the physical address + and length of the register region which contains revision and debug + features. The second entry specifies the physical address and length + of the register region indicating the strapping options. diff --git a/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt b/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt new file mode 100644 index 000000000..83f6a251b --- /dev/null +++ b/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt @@ -0,0 +1,17 @@ +NVIDIA Tegra APBMISC block + +Required properties: +- compatible: Must be: + - Tegra20: "nvidia,tegra20-apbmisc" + - Tegra30: "nvidia,tegra30-apbmisc", "nvidia,tegra20-apbmisc" + - Tegra114: "nvidia,tegra114-apbmisc", "nvidia,tegra20-apbmisc" + - Tegra124: "nvidia,tegra124-apbmisc", "nvidia,tegra20-apbmisc" + - Tegra132: "nvidia,tegra124-apbmisc", "nvidia,tegra20-apbmisc" + - Tegra210: "nvidia,tegra210-apbmisc", "nvidia,tegra20-apbmisc" +- reg: Should contain 2 entries: the first entry gives the physical address + and length of the registers which contain revision and debug features. + The second entry gives the physical address and length of the + registers indicating the strapping options. + +Optional properties: +- nvidia,long-ram-code: If present, the RAM code is long (4 bit). If not, short (2 bit). diff --git a/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml b/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml new file mode 100644 index 000000000..b3c45c046 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +# Copyright (C) 2019,2020 Lubomir Rintel +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/misc/olpc,xo1.75-ec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OLPC XO-1.75 Embedded Controller bindings + +description: | + This binding describes the Embedded Controller acting as a SPI bus master + on a OLPC XO-1.75 laptop computer. + + The embedded controller requires the SPI controller driver to signal + readiness to receive a transfer (that is, when TX FIFO contains the + response data) by strobing the ACK pin with the ready signal. See the + "ready-gpios" property of the SSP binding as documented in: + . + +maintainers: + - Lubomir Rintel + +properties: + compatible: + const: olpc,xo1.75-ec + + cmd-gpios: + description: GPIO uspecifier of the CMD pin + maxItems: 1 + + spi-cpha: true + +required: + - compatible + - cmd-gpios + +additionalProperties: false + +examples: + - | + #include + + spi { + spi-slave; + #address-cells = <0>; + #size-cells = <0>; + ready-gpios = <&gpio 125 GPIO_ACTIVE_HIGH>; + + slave { + compatible = "olpc,xo1.75-ec"; + spi-cpha; + cmd-gpios = <&gpio 155 GPIO_ACTIVE_HIGH>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/misc/pvpanic-mmio.txt b/Documentation/devicetree/bindings/misc/pvpanic-mmio.txt new file mode 100644 index 000000000..985e90736 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/pvpanic-mmio.txt @@ -0,0 +1,29 @@ +* QEMU PVPANIC MMIO Configuration bindings + +QEMU's emulation / virtualization targets provide the following PVPANIC +MMIO Configuration interface on the "virt" machine. +type: + +- a read-write, 16-bit wide data register. + +QEMU exposes the data register to guests as memory mapped registers. + +Required properties: + +- compatible: "qemu,pvpanic-mmio". +- reg: the MMIO region used by the device. + * Bytes 0x0 Write panic event to the reg when guest OS panics. + * Bytes 0x1 Reserved. + +Example: + +/ { + #size-cells = <0x2>; + #address-cells = <0x2>; + + pvpanic-mmio@9060000 { + compatible = "qemu,pvpanic-mmio"; + reg = <0x0 0x9060000 0x0 0x2>; + }; +}; + diff --git a/Documentation/devicetree/bindings/misc/qcom,fastrpc.txt b/Documentation/devicetree/bindings/misc/qcom,fastrpc.txt new file mode 100644 index 000000000..2a1827ab5 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/qcom,fastrpc.txt @@ -0,0 +1,78 @@ +Qualcomm Technologies, Inc. FastRPC Driver + +The FastRPC implements an IPC (Inter-Processor Communication) +mechanism that allows for clients to transparently make remote method +invocations across DSP and APPS boundaries. This enables developers +to offload tasks to the DSP and free up the application processor for +other tasks. + +- compatible: + Usage: required + Value type: + Definition: must be "qcom,fastrpc" + +- label + Usage: required + Value type: + Definition: should specify the dsp domain name this fastrpc + corresponds to. must be one of this: "adsp", "mdsp", "sdsp", "cdsp" + +- #address-cells + Usage: required + Value type: + Definition: Must be 1 + +- #size-cells + Usage: required + Value type: + Definition: Must be 0 + += COMPUTE BANKS +Each subnode of the Fastrpc represents compute context banks available +on the dsp. +- All Compute context banks MUST contain the following properties: + +- compatible: + Usage: required + Value type: + Definition: must be "qcom,fastrpc-compute-cb" + +- reg + Usage: required + Value type: + Definition: Context Bank ID. + +- qcom,nsessions: + Usage: Optional + Value type: + Defination: A value indicating how many sessions can share this + context bank. Defaults to 1 when this property + is not specified. + +Example: + +adsp-pil { + compatible = "qcom,msm8996-adsp-pil"; + ... + smd-edge { + label = "lpass"; + fastrpc { + compatible = "qcom,fastrpc"; + qcom,smd-channels = "fastrpcsmd-apps-dsp"; + label = "adsp"; + #address-cells = <1>; + #size-cells = <0>; + + cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + }; + + cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + }; + ... + }; + }; +}; diff --git a/Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt b/Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt new file mode 100644 index 000000000..e3289634f --- /dev/null +++ b/Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt @@ -0,0 +1,58 @@ +* Xilinx SDFEC(16nm) IP * + +The Soft Decision Forward Error Correction (SDFEC) Engine is a Hard IP block +which provides high-throughput LDPC and Turbo Code implementations. +The LDPC decode & encode functionality is capable of covering a range of +customer specified Quasi-cyclic (QC) codes. The Turbo decode functionality +principally covers codes used by LTE. The FEC Engine offers significant +power and area savings versus implementations done in the FPGA fabric. + + +Required properties: +- compatible: Must be "xlnx,sd-fec-1.1" +- clock-names : List of input clock names from the following: + - "core_clk", Main processing clock for processing core (required) + - "s_axi_aclk", AXI4-Lite memory-mapped slave interface clock (required) + - "s_axis_din_aclk", DIN AXI4-Stream Slave interface clock (optional) + - "s_axis_din_words-aclk", DIN_WORDS AXI4-Stream Slave interface clock (optional) + - "s_axis_ctrl_aclk", Control input AXI4-Stream Slave interface clock (optional) + - "m_axis_dout_aclk", DOUT AXI4-Stream Master interface clock (optional) + - "m_axis_dout_words_aclk", DOUT_WORDS AXI4-Stream Master interface clock (optional) + - "m_axis_status_aclk", Status output AXI4-Stream Master interface clock (optional) +- clocks : Clock phandles (see clock_bindings.txt for details). +- reg: Should contain Xilinx SDFEC 16nm Hardened IP block registers + location and length. +- xlnx,sdfec-code : Should contain "ldpc" or "turbo" to describe the codes + being used. +- xlnx,sdfec-din-words : A value 0 indicates that the DIN_WORDS interface is + driven with a fixed value and is not present on the device, a value of 1 + configures the DIN_WORDS to be block based, while a value of 2 configures the + DIN_WORDS input to be supplied for each AXI transaction. +- xlnx,sdfec-din-width : Configures the DIN AXI stream where a value of 1 + configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width + of "4x128b". +- xlnx,sdfec-dout-words : A value 0 indicates that the DOUT_WORDS interface is + driven with a fixed value and is not present on the device, a value of 1 + configures the DOUT_WORDS to be block based, while a value of 2 configures the + DOUT_WORDS input to be supplied for each AXI transaction. +- xlnx,sdfec-dout-width : Configures the DOUT AXI stream where a value of 1 + configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width + of "4x128b". +Optional properties: +- interrupts: should contain SDFEC interrupt number + +Example +--------------------------------------- + sd_fec_0: sd-fec@a0040000 { + compatible = "xlnx,sd-fec-1.1"; + clock-names = "core_clk","s_axi_aclk","s_axis_ctrl_aclk","s_axis_din_aclk","m_axis_status_aclk","m_axis_dout_aclk"; + clocks = <&misc_clk_2>,<&misc_clk_0>,<&misc_clk_1>,<&misc_clk_1>,<&misc_clk_1>, <&misc_clk_1>; + reg = <0x0 0xa0040000 0x0 0x40000>; + interrupt-parent = <&axi_intc>; + interrupts = <1 0>; + xlnx,sdfec-code = "ldpc"; + xlnx,sdfec-din-words = <0>; + xlnx,sdfec-din-width = <2>; + xlnx,sdfec-dout-words = <0>; + xlnx,sdfec-dout-width = <1>; + }; -- cgit v1.2.3