From 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 12:05:51 +0200 Subject: Adding upstream version 5.10.209. Signed-off-by: Daniel Baumann --- Documentation/x86/amd-memory-encryption.rst | 97 +++++++++++++++++++++++++++++ 1 file changed, 97 insertions(+) create mode 100644 Documentation/x86/amd-memory-encryption.rst (limited to 'Documentation/x86/amd-memory-encryption.rst') diff --git a/Documentation/x86/amd-memory-encryption.rst b/Documentation/x86/amd-memory-encryption.rst new file mode 100644 index 000000000..c48d452d0 --- /dev/null +++ b/Documentation/x86/amd-memory-encryption.rst @@ -0,0 +1,97 @@ +.. SPDX-License-Identifier: GPL-2.0 + +===================== +AMD Memory Encryption +===================== + +Secure Memory Encryption (SME) and Secure Encrypted Virtualization (SEV) are +features found on AMD processors. + +SME provides the ability to mark individual pages of memory as encrypted using +the standard x86 page tables. A page that is marked encrypted will be +automatically decrypted when read from DRAM and encrypted when written to +DRAM. SME can therefore be used to protect the contents of DRAM from physical +attacks on the system. + +SEV enables running encrypted virtual machines (VMs) in which the code and data +of the guest VM are secured so that a decrypted version is available only +within the VM itself. SEV guest VMs have the concept of private and shared +memory. Private memory is encrypted with the guest-specific key, while shared +memory may be encrypted with hypervisor key. When SME is enabled, the hypervisor +key is the same key which is used in SME. + +A page is encrypted when a page table entry has the encryption bit set (see +below on how to determine its position). The encryption bit can also be +specified in the cr3 register, allowing the PGD table to be encrypted. Each +successive level of page tables can also be encrypted by setting the encryption +bit in the page table entry that points to the next table. This allows the full +page table hierarchy to be encrypted. Note, this means that just because the +encryption bit is set in cr3, doesn't imply the full hierarchy is encrypted. +Each page table entry in the hierarchy needs to have the encryption bit set to +achieve that. So, theoretically, you could have the encryption bit set in cr3 +so that the PGD is encrypted, but not set the encryption bit in the PGD entry +for a PUD which results in the PUD pointed to by that entry to not be +encrypted. + +When SEV is enabled, instruction pages and guest page tables are always treated +as private. All the DMA operations inside the guest must be performed on shared +memory. Since the memory encryption bit is controlled by the guest OS when it +is operating in 64-bit or 32-bit PAE mode, in all other modes the SEV hardware +forces the memory encryption bit to 1. + +Support for SME and SEV can be determined through the CPUID instruction. The +CPUID function 0x8000001f reports information related to SME:: + + 0x8000001f[eax]: + Bit[0] indicates support for SME + Bit[1] indicates support for SEV + 0x8000001f[ebx]: + Bits[5:0] pagetable bit number used to activate memory + encryption + Bits[11:6] reduction in physical address space, in bits, when + memory encryption is enabled (this only affects + system physical addresses, not guest physical + addresses) + +If support for SME is present, MSR 0xc00100010 (MSR_K8_SYSCFG) can be used to +determine if SME is enabled and/or to enable memory encryption:: + + 0xc0010010: + Bit[23] 0 = memory encryption features are disabled + 1 = memory encryption features are enabled + +If SEV is supported, MSR 0xc0010131 (MSR_AMD64_SEV) can be used to determine if +SEV is active:: + + 0xc0010131: + Bit[0] 0 = memory encryption is not active + 1 = memory encryption is active + +Linux relies on BIOS to set this bit if BIOS has determined that the reduction +in the physical address space as a result of enabling memory encryption (see +CPUID information above) will not conflict with the address space resource +requirements for the system. If this bit is not set upon Linux startup then +Linux itself will not set it and memory encryption will not be possible. + +The state of SME in the Linux kernel can be documented as follows: + + - Supported: + The CPU supports SME (determined through CPUID instruction). + + - Enabled: + Supported and bit 23 of MSR_K8_SYSCFG is set. + + - Active: + Supported, Enabled and the Linux kernel is actively applying + the encryption bit to page table entries (the SME mask in the + kernel is non-zero). + +SME can also be enabled and activated in the BIOS. If SME is enabled and +activated in the BIOS, then all memory accesses will be encrypted and it will +not be necessary to activate the Linux memory encryption support. If the BIOS +merely enables SME (sets bit 23 of the MSR_K8_SYSCFG), then Linux can activate +memory encryption by default (CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT=y) or +by supplying mem_encrypt=on on the kernel command line. However, if BIOS does +not enable SME, then Linux will not be able to activate memory encryption, even +if configured to do so by default or the mem_encrypt=on command line parameter +is specified. -- cgit v1.2.3