From 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 12:05:51 +0200 Subject: Adding upstream version 5.10.209. Signed-off-by: Daniel Baumann --- arch/mips/Kconfig | 3344 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 3344 insertions(+) create mode 100644 arch/mips/Kconfig (limited to 'arch/mips/Kconfig') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig new file mode 100644 index 000000000..57839f630 --- /dev/null +++ b/arch/mips/Kconfig @@ -0,0 +1,3344 @@ +# SPDX-License-Identifier: GPL-2.0 +config MIPS + bool + default y + select ARCH_32BIT_OFF_T if !64BIT + select ARCH_BINFMT_ELF_STATE if MIPS_FP_SUPPORT + select ARCH_HAS_CPU_FINALIZE_INIT + select ARCH_HAS_FORTIFY_SOURCE + select ARCH_HAS_KCOV + select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE if !EVA + select ARCH_HAS_PTE_SPECIAL if !(32BIT && CPU_HAS_RIXI) + select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST + select ARCH_HAS_UBSAN_SANITIZE_ALL + select ARCH_SUPPORTS_UPROBES + select ARCH_USE_BUILTIN_BSWAP + select ARCH_USE_CMPXCHG_LOCKREF if 64BIT + select ARCH_USE_QUEUED_RWLOCKS + select ARCH_USE_QUEUED_SPINLOCKS + select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU + select ARCH_WANT_IPC_PARSE_VERSION + select BUILDTIME_TABLE_SORT + select CLONE_BACKWARDS + select CPU_NO_EFFICIENT_FFS if (TARGET_ISA_REV < 1) + select CPU_PM if CPU_IDLE + select GENERIC_ATOMIC64 if !64BIT + select GENERIC_CLOCKEVENTS + select GENERIC_CMOS_UPDATE + select GENERIC_CPU_AUTOPROBE + select GENERIC_GETTIMEOFDAY + select GENERIC_IOMAP + select GENERIC_IRQ_PROBE + select GENERIC_IRQ_SHOW + select GENERIC_ISA_DMA if EISA + select GENERIC_LIB_ASHLDI3 + select GENERIC_LIB_ASHRDI3 + select GENERIC_LIB_CMPDI2 + select GENERIC_LIB_LSHRDI3 + select GENERIC_LIB_UCMPDI2 + select GENERIC_SCHED_CLOCK if !CAVIUM_OCTEON_SOC + select GENERIC_SMP_IDLE_THREAD + select GENERIC_TIME_VSYSCALL + select GUP_GET_PTE_LOW_HIGH if CPU_MIPS32 && PHYS_ADDR_T_64BIT + select HANDLE_DOMAIN_IRQ + select HAVE_ARCH_COMPILER_H + select HAVE_ARCH_JUMP_LABEL + select HAVE_ARCH_KGDB + select HAVE_ARCH_MMAP_RND_BITS if MMU + select HAVE_ARCH_MMAP_RND_COMPAT_BITS if MMU && COMPAT + select HAVE_ARCH_SECCOMP_FILTER + select HAVE_ARCH_TRACEHOOK + select HAVE_ARCH_TRANSPARENT_HUGEPAGE if CPU_SUPPORTS_HUGEPAGES + select HAVE_ASM_MODVERSIONS + select HAVE_CBPF_JIT if !64BIT && !CPU_MICROMIPS + select HAVE_CONTEXT_TRACKING + select HAVE_TIF_NOHZ + select HAVE_C_RECORDMCOUNT + select HAVE_DEBUG_KMEMLEAK + select HAVE_DEBUG_STACKOVERFLOW + select HAVE_DMA_CONTIGUOUS + select HAVE_DYNAMIC_FTRACE + select HAVE_EBPF_JIT if 64BIT && !CPU_MICROMIPS && TARGET_ISA_REV >= 2 + select HAVE_EXIT_THREAD + select HAVE_FAST_GUP + select HAVE_FTRACE_MCOUNT_RECORD + select HAVE_FUNCTION_GRAPH_TRACER + select HAVE_FUNCTION_TRACER + select HAVE_GCC_PLUGINS + select HAVE_GENERIC_VDSO + select HAVE_IDE + select HAVE_IOREMAP_PROT + select HAVE_IRQ_EXIT_ON_IRQ_STACK + select HAVE_IRQ_TIME_ACCOUNTING + select HAVE_KPROBES + select HAVE_KRETPROBES + select HAVE_LD_DEAD_CODE_DATA_ELIMINATION + select HAVE_MOD_ARCH_SPECIFIC + select HAVE_NMI + select HAVE_OPROFILE + select HAVE_PERF_EVENTS + select HAVE_REGS_AND_STACK_ACCESS_API + select HAVE_RSEQ + select HAVE_SPARSE_SYSCALL_NR + select HAVE_STACKPROTECTOR + select HAVE_SYSCALL_TRACEPOINTS + select HAVE_VIRT_CPU_ACCOUNTING_GEN if 64BIT || !SMP + select IRQ_FORCED_THREADING + select ISA if EISA + select MODULES_USE_ELF_REL if MODULES + select MODULES_USE_ELF_RELA if MODULES && 64BIT + select PERF_USE_VMALLOC + select PCI_MSI_ARCH_FALLBACKS if PCI_MSI + select RTC_LIB + select SET_FS + select SYSCTL_EXCEPTION_TRACE + select VIRT_TO_BUS + +config MIPS_FIXUP_BIGPHYS_ADDR + bool + +config MIPS_GENERIC + bool + +config MACH_INGENIC + bool + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_ZBOOT + select DMA_NONCOHERENT + select IRQ_MIPS_CPU + select PINCTRL + select GPIOLIB + select COMMON_CLK + select GENERIC_IRQ_CHIP + select BUILTIN_DTB if MIPS_NO_APPENDED_DTB + select USE_OF + select CPU_SUPPORTS_CPUFREQ + select MIPS_EXTERNAL_TIMER + +menu "Machine selection" + +choice + prompt "System type" + default MIPS_GENERIC_KERNEL + +config MIPS_GENERIC_KERNEL + bool "Generic board-agnostic MIPS kernel" + select MIPS_GENERIC + select BOOT_RAW + select BUILTIN_DTB + select CEVT_R4K + select CLKSRC_MIPS_GIC + select COMMON_CLK + select CPU_MIPSR2_IRQ_EI + select CPU_MIPSR2_IRQ_VI + select CSRC_R4K + select DMA_PERDEV_COHERENT + select HAVE_PCI + select IRQ_MIPS_CPU + select MIPS_AUTO_PFN_OFFSET + select MIPS_CPU_SCACHE + select MIPS_GIC + select MIPS_L1_CACHE_SHIFT_7 + select NO_EXCEPT_FILL + select PCI_DRIVERS_GENERIC + select SMP_UP if SMP + select SWAP_IO_SPACE + select SYS_HAS_CPU_MIPS32_R1 + select SYS_HAS_CPU_MIPS32_R2 + select SYS_HAS_CPU_MIPS32_R6 + select SYS_HAS_CPU_MIPS64_R1 + select SYS_HAS_CPU_MIPS64_R2 + select SYS_HAS_CPU_MIPS64_R6 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_HIGHMEM + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_MICROMIPS + select SYS_SUPPORTS_MIPS16 + select SYS_SUPPORTS_MIPS_CPS + select SYS_SUPPORTS_MULTITHREADING + select SYS_SUPPORTS_RELOCATABLE + select SYS_SUPPORTS_SMARTMIPS + select SYS_SUPPORTS_ZBOOT + select UHI_BOOT + select USB_EHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN + select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN + select USB_OHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN + select USB_OHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN + select USB_UHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN + select USB_UHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN + select USE_OF + help + Select this to build a kernel which aims to support multiple boards, + generally using a flattened device tree passed from the bootloader + using the boot protocol defined in the UHI (Unified Hosting + Interface) specification. + +config MIPS_ALCHEMY + bool "Alchemy processor based machines" + select PHYS_ADDR_T_64BIT + select CEVT_R4K + select CSRC_R4K + select IRQ_MIPS_CPU + select DMA_MAYBE_COHERENT # Au1000,1500,1100 aren't, rest is + select MIPS_FIXUP_BIGPHYS_ADDR if PCI + select SYS_HAS_CPU_MIPS32_R1 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_APM_EMULATION + select GPIOLIB + select SYS_SUPPORTS_ZBOOT + select COMMON_CLK + +config AR7 + bool "Texas Instruments AR7" + select BOOT_ELF32 + select DMA_NONCOHERENT + select CEVT_R4K + select CSRC_R4K + select IRQ_MIPS_CPU + select NO_EXCEPT_FILL + select SWAP_IO_SPACE + select SYS_HAS_CPU_MIPS32_R1 + select SYS_HAS_EARLY_PRINTK + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_MIPS16 + select SYS_SUPPORTS_ZBOOT_UART16550 + select GPIOLIB + select VLYNQ + select HAVE_LEGACY_CLK + help + Support for the Texas Instruments AR7 System-on-a-Chip + family: TNETD7100, 7200 and 7300. + +config ATH25 + bool "Atheros AR231x/AR531x SoC support" + select CEVT_R4K + select CSRC_R4K + select DMA_NONCOHERENT + select IRQ_MIPS_CPU + select IRQ_DOMAIN + select SYS_HAS_CPU_MIPS32_R1 + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_HAS_EARLY_PRINTK + help + Support for Atheros AR231x and Atheros AR531x based boards + +config ATH79 + bool "Atheros AR71XX/AR724X/AR913X based boards" + select ARCH_HAS_RESET_CONTROLLER + select BOOT_RAW + select CEVT_R4K + select CSRC_R4K + select DMA_NONCOHERENT + select GPIOLIB + select PINCTRL + select COMMON_CLK + select IRQ_MIPS_CPU + select SYS_HAS_CPU_MIPS32_R2 + select SYS_HAS_EARLY_PRINTK + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_MIPS16 + select SYS_SUPPORTS_ZBOOT_UART_PROM + select USE_OF + select USB_EHCI_ROOT_HUB_TT if USB_EHCI_HCD_PLATFORM + help + Support for the Atheros AR71XX/AR724X/AR913X SoCs. + +config BMIPS_GENERIC + bool "Broadcom Generic BMIPS kernel" + select ARCH_HAS_SYNC_DMA_FOR_CPU_ALL + select ARCH_HAS_PHYS_TO_DMA + select BOOT_RAW + select NO_EXCEPT_FILL + select USE_OF + select CEVT_R4K + select CSRC_R4K + select SYNC_R4K + select COMMON_CLK + select BCM6345_L1_IRQ + select BCM7038_L1_IRQ + select BCM7120_L2_IRQ + select BRCMSTB_L2_IRQ + select IRQ_MIPS_CPU + select DMA_NONCOHERENT + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_HIGHMEM + select SYS_HAS_CPU_BMIPS32_3300 + select SYS_HAS_CPU_BMIPS4350 + select SYS_HAS_CPU_BMIPS4380 + select SYS_HAS_CPU_BMIPS5000 + select SWAP_IO_SPACE + select USB_EHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN + select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN + select USB_OHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN + select USB_OHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN + select HARDIRQS_SW_RESEND + help + Build a generic DT-based kernel image that boots on select + BCM33xx cable modem chips, BCM63xx DSL chips, and BCM7xxx set-top + box chips. Note that CONFIG_CPU_BIG_ENDIAN/CONFIG_CPU_LITTLE_ENDIAN + must be set appropriately for your board. + +config BCM47XX + bool "Broadcom BCM47XX based boards" + select BOOT_RAW + select CEVT_R4K + select CSRC_R4K + select DMA_NONCOHERENT + select HAVE_PCI + select IRQ_MIPS_CPU + select SYS_HAS_CPU_MIPS32_R1 + select NO_EXCEPT_FILL + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_MIPS16 + select SYS_SUPPORTS_ZBOOT + select SYS_HAS_EARLY_PRINTK + select USE_GENERIC_EARLY_PRINTK_8250 + select GPIOLIB + select LEDS_GPIO_REGISTER + select BCM47XX_NVRAM + select BCM47XX_SPROM + select BCM47XX_SSB if !BCM47XX_BCMA + help + Support for BCM47XX based boards + +config BCM63XX + bool "Broadcom BCM63XX based boards" + select BOOT_RAW + select CEVT_R4K + select CSRC_R4K + select SYNC_R4K + select DMA_NONCOHERENT + select IRQ_MIPS_CPU + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_HAS_EARLY_PRINTK + select SYS_HAS_CPU_BMIPS32_3300 + select SYS_HAS_CPU_BMIPS4350 + select SYS_HAS_CPU_BMIPS4380 + select SWAP_IO_SPACE + select GPIOLIB + select MIPS_L1_CACHE_SHIFT_4 + select CLKDEV_LOOKUP + select HAVE_LEGACY_CLK + help + Support for BCM63XX based boards + +config MIPS_COBALT + bool "Cobalt Server" + select CEVT_R4K + select CSRC_R4K + select CEVT_GT641XX + select DMA_NONCOHERENT + select FORCE_PCI + select I8253 + select I8259 + select IRQ_MIPS_CPU + select IRQ_GT641XX + select PCI_GT64XXX_PCI0 + select SYS_HAS_CPU_NEVADA + select SYS_HAS_EARLY_PRINTK + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select USE_GENERIC_EARLY_PRINTK_8250 + +config MACH_DECSTATION + bool "DECstations" + select BOOT_ELF32 + select CEVT_DS1287 + select CEVT_R4K if CPU_R4X00 + select CSRC_IOASIC + select CSRC_R4K if CPU_R4X00 + select CPU_DADDI_WORKAROUNDS if 64BIT + select CPU_R4000_WORKAROUNDS if 64BIT + select CPU_R4400_WORKAROUNDS if 64BIT + select DMA_NONCOHERENT + select NO_IOPORT_MAP + select IRQ_MIPS_CPU + select SYS_HAS_CPU_R3000 + select SYS_HAS_CPU_R4X00 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_128HZ + select SYS_SUPPORTS_256HZ + select SYS_SUPPORTS_1024HZ + select MIPS_L1_CACHE_SHIFT_4 + help + This enables support for DEC's MIPS based workstations. For details + see the Linux/MIPS FAQ on and the + DECstation porting pages on . + + If you have one of the following DECstation Models you definitely + want to choose R4xx0 for the CPU Type: + + DECstation 5000/50 + DECstation 5000/150 + DECstation 5000/260 + DECsystem 5900/260 + + otherwise choose R3000. + +config MACH_JAZZ + bool "Jazz family of machines" + select ARC_MEMORY + select ARC_PROMLIB + select ARCH_MIGHT_HAVE_PC_PARPORT + select ARCH_MIGHT_HAVE_PC_SERIO + select DMA_OPS + select FW_ARC + select FW_ARC32 + select ARCH_MAY_HAVE_PC_FDC + select CEVT_R4K + select CSRC_R4K + select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN + select GENERIC_ISA_DMA + select HAVE_PCSPKR_PLATFORM + select IRQ_MIPS_CPU + select I8253 + select I8259 + select ISA + select SYS_HAS_CPU_R4X00 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_100HZ + help + This a family of machines based on the MIPS R4030 chipset which was + used by several vendors to build RISC/os and Windows NT workstations. + Members include the Acer PICA, MIPS Magnum 4000, MIPS Millennium and + Olivetti M700-10 workstations. + +config MACH_INGENIC_SOC + bool "Ingenic SoC based machines" + select MIPS_GENERIC + select MACH_INGENIC + select SYS_SUPPORTS_ZBOOT_UART16550 + select CPU_SUPPORTS_CPUFREQ + select MIPS_EXTERNAL_TIMER + +config LANTIQ + bool "Lantiq based platforms" + select DMA_NONCOHERENT + select IRQ_MIPS_CPU + select CEVT_R4K + select CSRC_R4K + select SYS_HAS_CPU_MIPS32_R1 + select SYS_HAS_CPU_MIPS32_R2 + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_MIPS16 + select SYS_SUPPORTS_MULTITHREADING + select SYS_SUPPORTS_VPE_LOADER + select SYS_HAS_EARLY_PRINTK + select GPIOLIB + select SWAP_IO_SPACE + select BOOT_RAW + select CLKDEV_LOOKUP + select HAVE_LEGACY_CLK + select USE_OF + select PINCTRL + select PINCTRL_LANTIQ + select ARCH_HAS_RESET_CONTROLLER + select RESET_CONTROLLER + +config MACH_LOONGSON32 + bool "Loongson 32-bit family of machines" + select SYS_SUPPORTS_ZBOOT + help + This enables support for the Loongson-1 family of machines. + + Loongson-1 is a family of 32-bit MIPS-compatible SoCs developed by + the Institute of Computing Technology (ICT), Chinese Academy of + Sciences (CAS). + +config MACH_LOONGSON2EF + bool "Loongson-2E/F family of machines" + select SYS_SUPPORTS_ZBOOT + help + This enables the support of early Loongson-2E/F family of machines. + +config MACH_LOONGSON64 + bool "Loongson 64-bit family of machines" + select ARCH_SPARSEMEM_ENABLE + select ARCH_MIGHT_HAVE_PC_PARPORT + select ARCH_MIGHT_HAVE_PC_SERIO + select GENERIC_ISA_DMA_SUPPORT_BROKEN + select BOOT_ELF32 + select BOARD_SCACHE + select CSRC_R4K + select CEVT_R4K + select CPU_HAS_WB + select FORCE_PCI + select ISA + select I8259 + select IRQ_MIPS_CPU + select NO_EXCEPT_FILL + select NR_CPUS_DEFAULT_64 + select USE_GENERIC_EARLY_PRINTK_8250 + select PCI_DRIVERS_GENERIC + select SYS_HAS_CPU_LOONGSON64 + select SYS_HAS_EARLY_PRINTK + select SYS_SUPPORTS_SMP + select SYS_SUPPORTS_HOTPLUG_CPU + select SYS_SUPPORTS_NUMA + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_HIGHMEM + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_ZBOOT + select ZONE_DMA32 + select NUMA + select SMP + select COMMON_CLK + select USE_OF + select BUILTIN_DTB + select PCI_HOST_GENERIC + help + This enables the support of Loongson-2/3 family of machines. + + Loongson-2 and Loongson-3 are 64-bit general-purpose processors with + GS264/GS464/GS464E/GS464V microarchitecture (except old Loongson-2E + and Loongson-2F which will be removed), developed by the Institute + of Computing Technology (ICT), Chinese Academy of Sciences (CAS). + +config MACH_PISTACHIO + bool "IMG Pistachio SoC based boards" + select BOOT_ELF32 + select BOOT_RAW + select CEVT_R4K + select CLKSRC_MIPS_GIC + select COMMON_CLK + select CSRC_R4K + select DMA_NONCOHERENT + select GPIOLIB + select IRQ_MIPS_CPU + select MFD_SYSCON + select MIPS_CPU_SCACHE + select MIPS_GIC + select PINCTRL + select REGULATOR + select SYS_HAS_CPU_MIPS32_R2 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_MIPS_CPS + select SYS_SUPPORTS_MULTITHREADING + select SYS_SUPPORTS_RELOCATABLE + select SYS_SUPPORTS_ZBOOT + select SYS_HAS_EARLY_PRINTK + select USE_GENERIC_EARLY_PRINTK_8250 + select USE_OF + help + This enables support for the IMG Pistachio SoC platform. + +config MIPS_MALTA + bool "MIPS Malta board" + select ARCH_MAY_HAVE_PC_FDC + select ARCH_MIGHT_HAVE_PC_PARPORT + select ARCH_MIGHT_HAVE_PC_SERIO + select BOOT_ELF32 + select BOOT_RAW + select BUILTIN_DTB + select CEVT_R4K + select CLKSRC_MIPS_GIC + select COMMON_CLK + select CSRC_R4K + select DMA_MAYBE_COHERENT + select GENERIC_ISA_DMA + select HAVE_PCSPKR_PLATFORM + select HAVE_PCI + select I8253 + select I8259 + select IRQ_MIPS_CPU + select MIPS_BONITO64 + select MIPS_CPU_SCACHE + select MIPS_GIC + select MIPS_L1_CACHE_SHIFT_6 + select MIPS_MSC + select PCI_GT64XXX_PCI0 + select SMP_UP if SMP + select SWAP_IO_SPACE + select SYS_HAS_CPU_MIPS32_R1 + select SYS_HAS_CPU_MIPS32_R2 + select SYS_HAS_CPU_MIPS32_R3_5 + select SYS_HAS_CPU_MIPS32_R5 + select SYS_HAS_CPU_MIPS32_R6 + select SYS_HAS_CPU_MIPS64_R1 + select SYS_HAS_CPU_MIPS64_R2 + select SYS_HAS_CPU_MIPS64_R6 + select SYS_HAS_CPU_NEVADA + select SYS_HAS_CPU_RM7000 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_HIGHMEM + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_MICROMIPS + select SYS_SUPPORTS_MIPS16 + select SYS_SUPPORTS_MIPS_CMP + select SYS_SUPPORTS_MIPS_CPS + select SYS_SUPPORTS_MULTITHREADING + select SYS_SUPPORTS_RELOCATABLE + select SYS_SUPPORTS_SMARTMIPS + select SYS_SUPPORTS_VPE_LOADER + select SYS_SUPPORTS_ZBOOT + select USE_OF + select WAR_ICACHE_REFILLS + select ZONE_DMA32 if 64BIT + help + This enables support for the MIPS Technologies Malta evaluation + board. + +config MACH_PIC32 + bool "Microchip PIC32 Family" + help + This enables support for the Microchip PIC32 family of platforms. + + Microchip PIC32 is a family of general-purpose 32 bit MIPS core + microcontrollers. + +config MACH_VR41XX + bool "NEC VR4100 series based machines" + select CEVT_R4K + select CSRC_R4K + select SYS_HAS_CPU_VR41XX + select SYS_SUPPORTS_MIPS16 + select GPIOLIB + +config RALINK + bool "Ralink based machines" + select CEVT_R4K + select CSRC_R4K + select BOOT_RAW + select DMA_NONCOHERENT + select IRQ_MIPS_CPU + select USE_OF + select SYS_HAS_CPU_MIPS32_R1 + select SYS_HAS_CPU_MIPS32_R2 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_MIPS16 + select SYS_SUPPORTS_ZBOOT + select SYS_HAS_EARLY_PRINTK + select CLKDEV_LOOKUP + select ARCH_HAS_RESET_CONTROLLER + select RESET_CONTROLLER + +config SGI_IP22 + bool "SGI IP22 (Indy/Indigo2)" + select ARC_MEMORY + select ARC_PROMLIB + select FW_ARC + select FW_ARC32 + select ARCH_MIGHT_HAVE_PC_SERIO + select BOOT_ELF32 + select CEVT_R4K + select CSRC_R4K + select DEFAULT_SGI_PARTITION + select DMA_NONCOHERENT + select HAVE_EISA + select I8253 + select I8259 + select IP22_CPU_SCACHE + select IRQ_MIPS_CPU + select GENERIC_ISA_DMA_SUPPORT_BROKEN + select SGI_HAS_I8042 + select SGI_HAS_INDYDOG + select SGI_HAS_HAL2 + select SGI_HAS_SEEQ + select SGI_HAS_WD93 + select SGI_HAS_ZILOG + select SWAP_IO_SPACE + select SYS_HAS_CPU_R4X00 + select SYS_HAS_CPU_R5000 + select SYS_HAS_EARLY_PRINTK + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN + select WAR_R4600_V1_INDEX_ICACHEOP + select WAR_R4600_V1_HIT_CACHEOP + select WAR_R4600_V2_HIT_CACHEOP + select MIPS_L1_CACHE_SHIFT_7 + help + This are the SGI Indy, Challenge S and Indigo2, as well as certain + OEM variants like the Tandem CMN B006S. To compile a Linux kernel + that runs on these, say Y here. + +config SGI_IP27 + bool "SGI IP27 (Origin200/2000)" + select ARCH_HAS_PHYS_TO_DMA + select ARCH_SPARSEMEM_ENABLE + select FW_ARC + select FW_ARC64 + select ARC_CMDLINE_ONLY + select BOOT_ELF64 + select DEFAULT_SGI_PARTITION + select SYS_HAS_EARLY_PRINTK + select HAVE_PCI + select IRQ_MIPS_CPU + select IRQ_DOMAIN_HIERARCHY + select NR_CPUS_DEFAULT_64 + select PCI_DRIVERS_GENERIC + select PCI_XTALK_BRIDGE + select SYS_HAS_CPU_R10000 + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_NUMA + select SYS_SUPPORTS_SMP + select WAR_R10000_LLSC + select MIPS_L1_CACHE_SHIFT_7 + select NUMA + help + This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics + workstations. To compile a Linux kernel that runs on these, say Y + here. + +config SGI_IP28 + bool "SGI IP28 (Indigo2 R10k)" + select ARC_MEMORY + select ARC_PROMLIB + select FW_ARC + select FW_ARC64 + select ARCH_MIGHT_HAVE_PC_SERIO + select BOOT_ELF64 + select CEVT_R4K + select CSRC_R4K + select DEFAULT_SGI_PARTITION + select DMA_NONCOHERENT + select GENERIC_ISA_DMA_SUPPORT_BROKEN + select IRQ_MIPS_CPU + select HAVE_EISA + select I8253 + select I8259 + select SGI_HAS_I8042 + select SGI_HAS_INDYDOG + select SGI_HAS_HAL2 + select SGI_HAS_SEEQ + select SGI_HAS_WD93 + select SGI_HAS_ZILOG + select SWAP_IO_SPACE + select SYS_HAS_CPU_R10000 + select SYS_HAS_EARLY_PRINTK + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN + select WAR_R10000_LLSC + select MIPS_L1_CACHE_SHIFT_7 + help + This is the SGI Indigo2 with R10000 processor. To compile a Linux + kernel that runs on these, say Y here. + +config SGI_IP30 + bool "SGI IP30 (Octane/Octane2)" + select ARCH_HAS_PHYS_TO_DMA + select FW_ARC + select FW_ARC64 + select BOOT_ELF64 + select CEVT_R4K + select CSRC_R4K + select SYNC_R4K if SMP + select ZONE_DMA32 + select HAVE_PCI + select IRQ_MIPS_CPU + select IRQ_DOMAIN_HIERARCHY + select NR_CPUS_DEFAULT_2 + select PCI_DRIVERS_GENERIC + select PCI_XTALK_BRIDGE + select SYS_HAS_EARLY_PRINTK + select SYS_HAS_CPU_R10000 + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_SMP + select WAR_R10000_LLSC + select MIPS_L1_CACHE_SHIFT_7 + select ARC_MEMORY + help + These are the SGI Octane and Octane2 graphics workstations. To + compile a Linux kernel that runs on these, say Y here. + +config SGI_IP32 + bool "SGI IP32 (O2)" + select ARC_MEMORY + select ARC_PROMLIB + select ARCH_HAS_PHYS_TO_DMA + select FW_ARC + select FW_ARC32 + select BOOT_ELF32 + select CEVT_R4K + select CSRC_R4K + select DMA_NONCOHERENT + select HAVE_PCI + select IRQ_MIPS_CPU + select R5000_CPU_SCACHE + select RM7000_CPU_SCACHE + select SYS_HAS_CPU_R5000 + select SYS_HAS_CPU_R10000 if BROKEN + select SYS_HAS_CPU_RM7000 + select SYS_HAS_CPU_NEVADA + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN + select WAR_ICACHE_REFILLS + help + If you want this kernel to run on SGI O2 workstation, say Y here. + +config SIBYTE_CRHINE + bool "Sibyte BCM91120C-CRhine" + select BOOT_ELF32 + select SIBYTE_BCM1120 + select SWAP_IO_SPACE + select SYS_HAS_CPU_SB1 + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_LITTLE_ENDIAN + +config SIBYTE_CARMEL + bool "Sibyte BCM91120x-Carmel" + select BOOT_ELF32 + select SIBYTE_BCM1120 + select SWAP_IO_SPACE + select SYS_HAS_CPU_SB1 + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_LITTLE_ENDIAN + +config SIBYTE_CRHONE + bool "Sibyte BCM91125C-CRhone" + select BOOT_ELF32 + select SIBYTE_BCM1125 + select SWAP_IO_SPACE + select SYS_HAS_CPU_SB1 + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_HIGHMEM + select SYS_SUPPORTS_LITTLE_ENDIAN + +config SIBYTE_RHONE + bool "Sibyte BCM91125E-Rhone" + select BOOT_ELF32 + select SIBYTE_BCM1125H + select SWAP_IO_SPACE + select SYS_HAS_CPU_SB1 + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_LITTLE_ENDIAN + +config SIBYTE_SWARM + bool "Sibyte BCM91250A-SWARM" + select BOOT_ELF32 + select HAVE_PATA_PLATFORM + select SIBYTE_SB1250 + select SWAP_IO_SPACE + select SYS_HAS_CPU_SB1 + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_HIGHMEM + select SYS_SUPPORTS_LITTLE_ENDIAN + select ZONE_DMA32 if 64BIT + select SWIOTLB if ARCH_DMA_ADDR_T_64BIT && PCI + +config SIBYTE_LITTLESUR + bool "Sibyte BCM91250C2-LittleSur" + select BOOT_ELF32 + select HAVE_PATA_PLATFORM + select SIBYTE_SB1250 + select SWAP_IO_SPACE + select SYS_HAS_CPU_SB1 + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_HIGHMEM + select SYS_SUPPORTS_LITTLE_ENDIAN + select ZONE_DMA32 if 64BIT + +config SIBYTE_SENTOSA + bool "Sibyte BCM91250E-Sentosa" + select BOOT_ELF32 + select SIBYTE_SB1250 + select SWAP_IO_SPACE + select SYS_HAS_CPU_SB1 + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_LITTLE_ENDIAN + select SWIOTLB if ARCH_DMA_ADDR_T_64BIT && PCI + +config SIBYTE_BIGSUR + bool "Sibyte BCM91480B-BigSur" + select BOOT_ELF32 + select NR_CPUS_DEFAULT_4 + select SIBYTE_BCM1x80 + select SWAP_IO_SPACE + select SYS_HAS_CPU_SB1 + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_HIGHMEM + select SYS_SUPPORTS_LITTLE_ENDIAN + select ZONE_DMA32 if 64BIT + select SWIOTLB if ARCH_DMA_ADDR_T_64BIT && PCI + +config SNI_RM + bool "SNI RM200/300/400" + select ARC_MEMORY + select ARC_PROMLIB + select FW_ARC if CPU_LITTLE_ENDIAN + select FW_ARC32 if CPU_LITTLE_ENDIAN + select FW_SNIPROM if CPU_BIG_ENDIAN + select ARCH_MAY_HAVE_PC_FDC + select ARCH_MIGHT_HAVE_PC_PARPORT + select ARCH_MIGHT_HAVE_PC_SERIO + select BOOT_ELF32 + select CEVT_R4K + select CSRC_R4K + select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN + select DMA_NONCOHERENT + select GENERIC_ISA_DMA + select HAVE_EISA + select HAVE_PCSPKR_PLATFORM + select HAVE_PCI + select IRQ_MIPS_CPU + select I8253 + select I8259 + select ISA + select MIPS_L1_CACHE_SHIFT_6 + select SWAP_IO_SPACE if CPU_BIG_ENDIAN + select SYS_HAS_CPU_R4X00 + select SYS_HAS_CPU_R5000 + select SYS_HAS_CPU_R10000 + select R5000_CPU_SCACHE + select SYS_HAS_EARLY_PRINTK + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_HIGHMEM + select SYS_SUPPORTS_LITTLE_ENDIAN + select WAR_R4600_V2_HIT_CACHEOP + help + The SNI RM200/300/400 are MIPS-based machines manufactured by + Siemens Nixdorf Informationssysteme (SNI), parent company of Pyramid + Technology and now in turn merged with Fujitsu. Say Y here to + support this machine type. + +config MACH_TX39XX + bool "Toshiba TX39 series based machines" + +config MACH_TX49XX + bool "Toshiba TX49 series based machines" + select WAR_TX49XX_ICACHE_INDEX_INV + +config MIKROTIK_RB532 + bool "Mikrotik RB532 boards" + select CEVT_R4K + select CSRC_R4K + select DMA_NONCOHERENT + select HAVE_PCI + select IRQ_MIPS_CPU + select SYS_HAS_CPU_MIPS32_R1 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select SWAP_IO_SPACE + select BOOT_RAW + select GPIOLIB + select MIPS_L1_CACHE_SHIFT_4 + help + Support the Mikrotik(tm) RouterBoard 532 series, + based on the IDT RC32434 SoC. + +config CAVIUM_OCTEON_SOC + bool "Cavium Networks Octeon SoC based boards" + select CEVT_R4K + select ARCH_HAS_PHYS_TO_DMA + select HAVE_RAPIDIO + select PHYS_ADDR_T_64BIT + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN + select EDAC_SUPPORT + select EDAC_ATOMIC_SCRUB + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_HOTPLUG_CPU if CPU_BIG_ENDIAN + select SYS_HAS_EARLY_PRINTK + select SYS_HAS_CPU_CAVIUM_OCTEON + select HAVE_PCI + select HAVE_PLAT_DELAY + select HAVE_PLAT_FW_INIT_CMDLINE + select HAVE_PLAT_MEMCPY + select ZONE_DMA32 + select HOLES_IN_ZONE + select GPIOLIB + select USE_OF + select ARCH_SPARSEMEM_ENABLE + select SYS_SUPPORTS_SMP + select NR_CPUS_DEFAULT_64 + select MIPS_NR_CPU_NR_MAP_1024 + select BUILTIN_DTB + select MTD_COMPLEX_MAPPINGS + select SWIOTLB + select SYS_SUPPORTS_RELOCATABLE + help + This option supports all of the Octeon reference boards from Cavium + Networks. It builds a kernel that dynamically determines the Octeon + CPU type and supports all known board reference implementations. + Some of the supported boards are: + EBT3000 + EBH3000 + EBH3100 + Thunder + Kodama + Hikari + Say Y here for most Octeon reference boards. + +config NLM_XLR_BOARD + bool "Netlogic XLR/XLS based systems" + select BOOT_ELF32 + select NLM_COMMON + select SYS_HAS_CPU_XLR + select SYS_SUPPORTS_SMP + select HAVE_PCI + select SWAP_IO_SPACE + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL + select PHYS_ADDR_T_64BIT + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_HIGHMEM + select NR_CPUS_DEFAULT_32 + select CEVT_R4K + select CSRC_R4K + select IRQ_MIPS_CPU + select ZONE_DMA32 if 64BIT + select SYNC_R4K + select SYS_HAS_EARLY_PRINTK + select SYS_SUPPORTS_ZBOOT + select SYS_SUPPORTS_ZBOOT_UART16550 + help + Support for systems based on Netlogic XLR and XLS processors. + Say Y here if you have a XLR or XLS based board. + +config NLM_XLP_BOARD + bool "Netlogic XLP based systems" + select BOOT_ELF32 + select NLM_COMMON + select SYS_HAS_CPU_XLP + select SYS_SUPPORTS_SMP + select HAVE_PCI + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL + select PHYS_ADDR_T_64BIT + select GPIOLIB + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_HIGHMEM + select NR_CPUS_DEFAULT_32 + select CEVT_R4K + select CSRC_R4K + select IRQ_MIPS_CPU + select ZONE_DMA32 if 64BIT + select SYNC_R4K + select SYS_HAS_EARLY_PRINTK + select USE_OF + select SYS_SUPPORTS_ZBOOT + select SYS_SUPPORTS_ZBOOT_UART16550 + help + This board is based on Netlogic XLP Processor. + Say Y here if you have a XLP based board. + +endchoice + +source "arch/mips/alchemy/Kconfig" +source "arch/mips/ath25/Kconfig" +source "arch/mips/ath79/Kconfig" +source "arch/mips/bcm47xx/Kconfig" +source "arch/mips/bcm63xx/Kconfig" +source "arch/mips/bmips/Kconfig" +source "arch/mips/generic/Kconfig" +source "arch/mips/ingenic/Kconfig" +source "arch/mips/jazz/Kconfig" +source "arch/mips/lantiq/Kconfig" +source "arch/mips/pic32/Kconfig" +source "arch/mips/pistachio/Kconfig" +source "arch/mips/ralink/Kconfig" +source "arch/mips/sgi-ip27/Kconfig" +source "arch/mips/sibyte/Kconfig" +source "arch/mips/txx9/Kconfig" +source "arch/mips/vr41xx/Kconfig" +source "arch/mips/cavium-octeon/Kconfig" +source "arch/mips/loongson2ef/Kconfig" +source "arch/mips/loongson32/Kconfig" +source "arch/mips/loongson64/Kconfig" +source "arch/mips/netlogic/Kconfig" + +endmenu + +config GENERIC_HWEIGHT + bool + default y + +config GENERIC_CALIBRATE_DELAY + bool + default y + +config SCHED_OMIT_FRAME_POINTER + bool + default y + +# +# Select some configuration options automatically based on user selections. +# +config FW_ARC + bool + +config ARCH_MAY_HAVE_PC_FDC + bool + +config BOOT_RAW + bool + +config CEVT_BCM1480 + bool + +config CEVT_DS1287 + bool + +config CEVT_GT641XX + bool + +config CEVT_R4K + bool + +config CEVT_SB1250 + bool + +config CEVT_TXX9 + bool + +config CSRC_BCM1480 + bool + +config CSRC_IOASIC + bool + +config CSRC_R4K + select CLOCKSOURCE_WATCHDOG if CPU_FREQ + bool + +config CSRC_SB1250 + bool + +config MIPS_CLOCK_VSYSCALL + def_bool CSRC_R4K || CLKSRC_MIPS_GIC + +config GPIO_TXX9 + select GPIOLIB + bool + +config FW_CFE + bool + +config ARCH_SUPPORTS_UPROBES + bool + +config DMA_MAYBE_COHERENT + select ARCH_HAS_DMA_COHERENCE_H + select DMA_NONCOHERENT + bool + +config DMA_PERDEV_COHERENT + bool + select ARCH_HAS_SETUP_DMA_OPS + select DMA_NONCOHERENT + +config DMA_NONCOHERENT + bool + # + # MIPS allows mixing "slightly different" Cacheability and Coherency + # Attribute bits. It is believed that the uncached access through + # KSEG1 and the implementation specific "uncached accelerated" used + # by pgprot_writcombine can be mixed, and the latter sometimes provides + # significant advantages. + # + select ARCH_HAS_DMA_WRITE_COMBINE + select ARCH_HAS_DMA_PREP_COHERENT + select ARCH_HAS_SYNC_DMA_FOR_DEVICE + select ARCH_HAS_DMA_SET_UNCACHED + select DMA_NONCOHERENT_MMAP + select NEED_DMA_MAP_STATE + +config SYS_HAS_EARLY_PRINTK + bool + +config SYS_SUPPORTS_HOTPLUG_CPU + bool + +config MIPS_BONITO64 + bool + +config MIPS_MSC + bool + +config SYNC_R4K + bool + +config NO_IOPORT_MAP + def_bool n + +config GENERIC_CSUM + def_bool CPU_NO_LOAD_STORE_LR + +config GENERIC_ISA_DMA + bool + select ZONE_DMA if GENERIC_ISA_DMA_SUPPORT_BROKEN=n + select ISA_DMA_API + +config GENERIC_ISA_DMA_SUPPORT_BROKEN + bool + select GENERIC_ISA_DMA + +config HAVE_PLAT_DELAY + bool + +config HAVE_PLAT_FW_INIT_CMDLINE + bool + +config HAVE_PLAT_MEMCPY + bool + +config ISA_DMA_API + bool + +config HOLES_IN_ZONE + bool + +config SYS_SUPPORTS_RELOCATABLE + bool + help + Selected if the platform supports relocating the kernel. + The platform must provide plat_get_fdt() if it selects CONFIG_USE_OF + to allow access to command line and entropy sources. + +config MIPS_CBPF_JIT + def_bool y + depends on BPF_JIT && HAVE_CBPF_JIT + +config MIPS_EBPF_JIT + def_bool y + depends on BPF_JIT && HAVE_EBPF_JIT + + +# +# Endianness selection. Sufficiently obscure so many users don't know what to +# answer,so we try hard to limit the available choices. Also the use of a +# choice statement should be more obvious to the user. +# +choice + prompt "Endianness selection" + help + Some MIPS machines can be configured for either little or big endian + byte order. These modes require different kernels and a different + Linux distribution. In general there is one preferred byteorder for a + particular system but some systems are just as commonly used in the + one or the other endianness. + +config CPU_BIG_ENDIAN + bool "Big endian" + depends on SYS_SUPPORTS_BIG_ENDIAN + +config CPU_LITTLE_ENDIAN + bool "Little endian" + depends on SYS_SUPPORTS_LITTLE_ENDIAN + +endchoice + +config EXPORT_UASM + bool + +config SYS_SUPPORTS_APM_EMULATION + bool + +config SYS_SUPPORTS_BIG_ENDIAN + bool + +config SYS_SUPPORTS_LITTLE_ENDIAN + bool + +config SYS_SUPPORTS_HUGETLBFS + bool + depends on CPU_SUPPORTS_HUGEPAGES + default y + +config MIPS_HUGE_TLB_SUPPORT + def_bool HUGETLB_PAGE || TRANSPARENT_HUGEPAGE + +config IRQ_CPU_RM7K + bool + +config IRQ_MSP_SLP + bool + +config IRQ_MSP_CIC + bool + +config IRQ_TXX9 + bool + +config IRQ_GT641XX + bool + +config PCI_GT64XXX_PCI0 + bool + +config PCI_XTALK_BRIDGE + bool + +config NO_EXCEPT_FILL + bool + +config MIPS_SPRAM + bool + +config SWAP_IO_SPACE + bool + +config SGI_HAS_INDYDOG + bool + +config SGI_HAS_HAL2 + bool + +config SGI_HAS_SEEQ + bool + +config SGI_HAS_WD93 + bool + +config SGI_HAS_ZILOG + bool + +config SGI_HAS_I8042 + bool + +config DEFAULT_SGI_PARTITION + bool + +config FW_ARC32 + bool + +config FW_SNIPROM + bool + +config BOOT_ELF32 + bool + +config MIPS_L1_CACHE_SHIFT_4 + bool + +config MIPS_L1_CACHE_SHIFT_5 + bool + +config MIPS_L1_CACHE_SHIFT_6 + bool + +config MIPS_L1_CACHE_SHIFT_7 + bool + +config MIPS_L1_CACHE_SHIFT + int + default "7" if MIPS_L1_CACHE_SHIFT_7 + default "6" if MIPS_L1_CACHE_SHIFT_6 + default "5" if MIPS_L1_CACHE_SHIFT_5 + default "4" if MIPS_L1_CACHE_SHIFT_4 + default "5" + +config ARC_CMDLINE_ONLY + bool + +config ARC_CONSOLE + bool "ARC console support" + depends on SGI_IP22 || SGI_IP28 || (SNI_RM && CPU_LITTLE_ENDIAN) + +config ARC_MEMORY + bool + +config ARC_PROMLIB + bool + +config FW_ARC64 + bool + +config BOOT_ELF64 + bool + +menu "CPU selection" + +choice + prompt "CPU type" + default CPU_R4X00 + +config CPU_LOONGSON64 + bool "Loongson 64-bit CPU" + depends on SYS_HAS_CPU_LOONGSON64 + select ARCH_HAS_PHYS_TO_DMA + select CPU_MIPSR2 + select CPU_HAS_PREFETCH + select CPU_SUPPORTS_64BIT_KERNEL + select CPU_SUPPORTS_HIGHMEM + select CPU_SUPPORTS_HUGEPAGES + select CPU_SUPPORTS_MSA + select CPU_DIEI_BROKEN if !LOONGSON3_ENHANCEMENT + select CPU_MIPSR2_IRQ_VI + select WEAK_ORDERING + select WEAK_REORDERING_BEYOND_LLSC + select MIPS_ASID_BITS_VARIABLE + select MIPS_PGD_C0_CONTEXT + select MIPS_L1_CACHE_SHIFT_6 + select MIPS_FP_SUPPORT + select GPIOLIB + select SWIOTLB + select HAVE_KVM + help + The Loongson GSx64(GS264/GS464/GS464E/GS464V) series of processor + cores implements the MIPS64R2 instruction set with many extensions, + including most 64-bit Loongson-2 (2H, 2K) and Loongson-3 (3A1000, + 3B1000, 3B1500, 3A2000, 3A3000 and 3A4000) processors. However, old + Loongson-2E/2F is not covered here and will be removed in future. + +config LOONGSON3_ENHANCEMENT + bool "New Loongson-3 CPU Enhancements" + default n + depends on CPU_LOONGSON64 + help + New Loongson-3 cores (since Loongson-3A R2, as opposed to Loongson-3A + R1, Loongson-3B R1 and Loongson-3B R2) has many enhancements, such as + FTLB, L1-VCache, EI/DI/Wait/Prefetch instruction, DSP/DSPr2 ASE, User + Local register, Read-Inhibit/Execute-Inhibit, SFB (Store Fill Buffer), + Fast TLB refill support, etc. + + This option enable those enhancements which are not probed at run + time. If you want a generic kernel to run on all Loongson 3 machines, + please say 'N' here. If you want a high-performance kernel to run on + new Loongson-3 machines only, please say 'Y' here. + +config CPU_LOONGSON3_WORKAROUNDS + bool "Old Loongson-3 LLSC Workarounds" + default y if SMP + depends on CPU_LOONGSON64 + help + Loongson-3 processors have the llsc issues which require workarounds. + Without workarounds the system may hang unexpectedly. + + Newer Loongson-3 will fix these issues and no workarounds are needed. + The workarounds have no significant side effect on them but may + decrease the performance of the system so this option should be + disabled unless the kernel is intended to be run on old systems. + + If unsure, please say Y. + +config CPU_LOONGSON3_CPUCFG_EMULATION + bool "Emulate the CPUCFG instruction on older Loongson cores" + default y + depends on CPU_LOONGSON64 + help + Loongson-3A R4 and newer have the CPUCFG instruction available for + userland to query CPU capabilities, much like CPUID on x86. This + option provides emulation of the instruction on older Loongson + cores, back to Loongson-3A1000. + + If unsure, please say Y. + +config CPU_LOONGSON2E + bool "Loongson 2E" + depends on SYS_HAS_CPU_LOONGSON2E + select CPU_LOONGSON2EF + help + The Loongson 2E processor implements the MIPS III instruction set + with many extensions. + + It has an internal FPGA northbridge, which is compatible to + bonito64. + +config CPU_LOONGSON2F + bool "Loongson 2F" + depends on SYS_HAS_CPU_LOONGSON2F + select CPU_LOONGSON2EF + select GPIOLIB + help + The Loongson 2F processor implements the MIPS III instruction set + with many extensions. + + Loongson2F have built-in DDR2 and PCIX controller. The PCIX controller + have a similar programming interface with FPGA northbridge used in + Loongson2E. + +config CPU_LOONGSON1B + bool "Loongson 1B" + depends on SYS_HAS_CPU_LOONGSON1B + select CPU_LOONGSON32 + select LEDS_GPIO_REGISTER + help + The Loongson 1B is a 32-bit SoC, which implements the MIPS32 + Release 1 instruction set and part of the MIPS32 Release 2 + instruction set. + +config CPU_LOONGSON1C + bool "Loongson 1C" + depends on SYS_HAS_CPU_LOONGSON1C + select CPU_LOONGSON32 + select LEDS_GPIO_REGISTER + help + The Loongson 1C is a 32-bit SoC, which implements the MIPS32 + Release 1 instruction set and part of the MIPS32 Release 2 + instruction set. + +config CPU_MIPS32_R1 + bool "MIPS32 Release 1" + depends on SYS_HAS_CPU_MIPS32_R1 + select CPU_HAS_PREFETCH + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_HIGHMEM + help + Choose this option to build a kernel for release 1 or later of the + MIPS32 architecture. Most modern embedded systems with a 32-bit + MIPS processor are based on a MIPS32 processor. If you know the + specific type of processor in your system, choose those that one + otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system. + Release 2 of the MIPS32 architecture is available since several + years so chances are you even have a MIPS32 Release 2 processor + in which case you should choose CPU_MIPS32_R2 instead for better + performance. + +config CPU_MIPS32_R2 + bool "MIPS32 Release 2" + depends on SYS_HAS_CPU_MIPS32_R2 + select CPU_HAS_PREFETCH + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_HIGHMEM + select CPU_SUPPORTS_MSA + select HAVE_KVM + help + Choose this option to build a kernel for release 2 or later of the + MIPS32 architecture. Most modern embedded systems with a 32-bit + MIPS processor are based on a MIPS32 processor. If you know the + specific type of processor in your system, choose those that one + otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system. + +config CPU_MIPS32_R5 + bool "MIPS32 Release 5" + depends on SYS_HAS_CPU_MIPS32_R5 + select CPU_HAS_PREFETCH + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_HIGHMEM + select CPU_SUPPORTS_MSA + select HAVE_KVM + select MIPS_O32_FP64_SUPPORT + help + Choose this option to build a kernel for release 5 or later of the + MIPS32 architecture. New MIPS processors, starting with the Warrior + family, are based on a MIPS32r5 processor. If you own an older + processor, you probably need to select MIPS32r1 or MIPS32r2 instead. + +config CPU_MIPS32_R6 + bool "MIPS32 Release 6" + depends on SYS_HAS_CPU_MIPS32_R6 + select CPU_HAS_PREFETCH + select CPU_NO_LOAD_STORE_LR + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_HIGHMEM + select CPU_SUPPORTS_MSA + select HAVE_KVM + select MIPS_O32_FP64_SUPPORT + help + Choose this option to build a kernel for release 6 or later of the + MIPS32 architecture. New MIPS processors, starting with the Warrior + family, are based on a MIPS32r6 processor. If you own an older + processor, you probably need to select MIPS32r1 or MIPS32r2 instead. + +config CPU_MIPS64_R1 + bool "MIPS64 Release 1" + depends on SYS_HAS_CPU_MIPS64_R1 + select CPU_HAS_PREFETCH + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_64BIT_KERNEL + select CPU_SUPPORTS_HIGHMEM + select CPU_SUPPORTS_HUGEPAGES + help + Choose this option to build a kernel for release 1 or later of the + MIPS64 architecture. Many modern embedded systems with a 64-bit + MIPS processor are based on a MIPS64 processor. If you know the + specific type of processor in your system, choose those that one + otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system. + Release 2 of the MIPS64 architecture is available since several + years so chances are you even have a MIPS64 Release 2 processor + in which case you should choose CPU_MIPS64_R2 instead for better + performance. + +config CPU_MIPS64_R2 + bool "MIPS64 Release 2" + depends on SYS_HAS_CPU_MIPS64_R2 + select CPU_HAS_PREFETCH + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_64BIT_KERNEL + select CPU_SUPPORTS_HIGHMEM + select CPU_SUPPORTS_HUGEPAGES + select CPU_SUPPORTS_MSA + select HAVE_KVM + help + Choose this option to build a kernel for release 2 or later of the + MIPS64 architecture. Many modern embedded systems with a 64-bit + MIPS processor are based on a MIPS64 processor. If you know the + specific type of processor in your system, choose those that one + otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system. + +config CPU_MIPS64_R5 + bool "MIPS64 Release 5" + depends on SYS_HAS_CPU_MIPS64_R5 + select CPU_HAS_PREFETCH + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_64BIT_KERNEL + select CPU_SUPPORTS_HIGHMEM + select CPU_SUPPORTS_HUGEPAGES + select CPU_SUPPORTS_MSA + select MIPS_O32_FP64_SUPPORT if 32BIT || MIPS32_O32 + select HAVE_KVM + help + Choose this option to build a kernel for release 5 or later of the + MIPS64 architecture. This is a intermediate MIPS architecture + release partly implementing release 6 features. Though there is no + any hardware known to be based on this release. + +config CPU_MIPS64_R6 + bool "MIPS64 Release 6" + depends on SYS_HAS_CPU_MIPS64_R6 + select CPU_HAS_PREFETCH + select CPU_NO_LOAD_STORE_LR + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_64BIT_KERNEL + select CPU_SUPPORTS_HIGHMEM + select CPU_SUPPORTS_HUGEPAGES + select CPU_SUPPORTS_MSA + select MIPS_O32_FP64_SUPPORT if 32BIT || MIPS32_O32 + select HAVE_KVM + help + Choose this option to build a kernel for release 6 or later of the + MIPS64 architecture. New MIPS processors, starting with the Warrior + family, are based on a MIPS64r6 processor. If you own an older + processor, you probably need to select MIPS64r1 or MIPS64r2 instead. + +config CPU_P5600 + bool "MIPS Warrior P5600" + depends on SYS_HAS_CPU_P5600 + select CPU_HAS_PREFETCH + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_HIGHMEM + select CPU_SUPPORTS_MSA + select CPU_SUPPORTS_CPUFREQ + select CPU_MIPSR2_IRQ_VI + select CPU_MIPSR2_IRQ_EI + select HAVE_KVM + select MIPS_O32_FP64_SUPPORT + help + Choose this option to build a kernel for MIPS Warrior P5600 CPU. + It's based on MIPS32r5 ISA with XPA, EVA, dual/quad issue exec pipes, + MMU with two-levels TLB, UCA, MSA, MDU core level features and system + level features like up to six P5600 calculation cores, CM2 with L2 + cache, IOCU/IOMMU (though might be unused depending on the system- + specific IP core configuration), GIC, CPC, virtualisation module, + eJTAG and PDtrace. + +config CPU_R3000 + bool "R3000" + depends on SYS_HAS_CPU_R3000 + select CPU_HAS_WB + select CPU_R3K_TLB + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_HIGHMEM + help + Please make sure to pick the right CPU type. Linux/MIPS is not + designed to be generic, i.e. Kernels compiled for R3000 CPUs will + *not* work on R4000 machines and vice versa. However, since most + of the supported machines have an R4000 (or similar) CPU, R4x00 + might be a safe bet. If the resulting kernel does not work, + try to recompile with R3000. + +config CPU_TX39XX + bool "R39XX" + depends on SYS_HAS_CPU_TX39XX + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_R3K_TLB + +config CPU_VR41XX + bool "R41xx" + depends on SYS_HAS_CPU_VR41XX + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_64BIT_KERNEL + help + The options selects support for the NEC VR4100 series of processors. + Only choose this option if you have one of these processors as a + kernel built with this option will not run on any other type of + processor or vice versa. + +config CPU_R4X00 + bool "R4x00" + depends on SYS_HAS_CPU_R4X00 + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_64BIT_KERNEL + select CPU_SUPPORTS_HUGEPAGES + help + MIPS Technologies R4000-series processors other than 4300, including + the R4000, R4400, R4600, and 4700. + +config CPU_TX49XX + bool "R49XX" + depends on SYS_HAS_CPU_TX49XX + select CPU_HAS_PREFETCH + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_64BIT_KERNEL + select CPU_SUPPORTS_HUGEPAGES + +config CPU_R5000 + bool "R5000" + depends on SYS_HAS_CPU_R5000 + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_64BIT_KERNEL + select CPU_SUPPORTS_HUGEPAGES + help + MIPS Technologies R5000-series processors other than the Nevada. + +config CPU_R5500 + bool "R5500" + depends on SYS_HAS_CPU_R5500 + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_64BIT_KERNEL + select CPU_SUPPORTS_HUGEPAGES + help + NEC VR5500 and VR5500A series processors implement 64-bit MIPS IV + instruction set. + +config CPU_NEVADA + bool "RM52xx" + depends on SYS_HAS_CPU_NEVADA + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_64BIT_KERNEL + select CPU_SUPPORTS_HUGEPAGES + help + QED / PMC-Sierra RM52xx-series ("Nevada") processors. + +config CPU_R10000 + bool "R10000" + depends on SYS_HAS_CPU_R10000 + select CPU_HAS_PREFETCH + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_64BIT_KERNEL + select CPU_SUPPORTS_HIGHMEM + select CPU_SUPPORTS_HUGEPAGES + help + MIPS Technologies R10000-series processors. + +config CPU_RM7000 + bool "RM7000" + depends on SYS_HAS_CPU_RM7000 + select CPU_HAS_PREFETCH + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_64BIT_KERNEL + select CPU_SUPPORTS_HIGHMEM + select CPU_SUPPORTS_HUGEPAGES + +config CPU_SB1 + bool "SB1" + depends on SYS_HAS_CPU_SB1 + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_64BIT_KERNEL + select CPU_SUPPORTS_HIGHMEM + select CPU_SUPPORTS_HUGEPAGES + select WEAK_ORDERING + +config CPU_CAVIUM_OCTEON + bool "Cavium Octeon processor" + depends on SYS_HAS_CPU_CAVIUM_OCTEON + select CPU_HAS_PREFETCH + select CPU_SUPPORTS_64BIT_KERNEL + select WEAK_ORDERING + select CPU_SUPPORTS_HIGHMEM + select CPU_SUPPORTS_HUGEPAGES + select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN + select USB_OHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN + select MIPS_L1_CACHE_SHIFT_7 + select HAVE_KVM + help + The Cavium Octeon processor is a highly integrated chip containing + many ethernet hardware widgets for networking tasks. The processor + can have up to 16 Mips64v2 cores and 8 integrated gigabit ethernets. + Full details can be found at http://www.caviumnetworks.com. + +config CPU_BMIPS + bool "Broadcom BMIPS" + depends on SYS_HAS_CPU_BMIPS + select CPU_MIPS32 + select CPU_BMIPS32_3300 if SYS_HAS_CPU_BMIPS32_3300 + select CPU_BMIPS4350 if SYS_HAS_CPU_BMIPS4350 + select CPU_BMIPS4380 if SYS_HAS_CPU_BMIPS4380 + select CPU_BMIPS5000 if SYS_HAS_CPU_BMIPS5000 + select CPU_SUPPORTS_32BIT_KERNEL + select DMA_NONCOHERENT + select IRQ_MIPS_CPU + select SWAP_IO_SPACE + select WEAK_ORDERING + select CPU_SUPPORTS_HIGHMEM + select CPU_HAS_PREFETCH + select CPU_SUPPORTS_CPUFREQ + select MIPS_EXTERNAL_TIMER + help + Support for BMIPS32/3300/4350/4380 and BMIPS5000 processors. + +config CPU_XLR + bool "Netlogic XLR SoC" + depends on SYS_HAS_CPU_XLR + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_64BIT_KERNEL + select CPU_SUPPORTS_HIGHMEM + select CPU_SUPPORTS_HUGEPAGES + select WEAK_ORDERING + select WEAK_REORDERING_BEYOND_LLSC + help + Netlogic Microsystems XLR/XLS processors. + +config CPU_XLP + bool "Netlogic XLP SoC" + depends on SYS_HAS_CPU_XLP + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_64BIT_KERNEL + select CPU_SUPPORTS_HIGHMEM + select WEAK_ORDERING + select WEAK_REORDERING_BEYOND_LLSC + select CPU_HAS_PREFETCH + select CPU_MIPSR2 + select CPU_SUPPORTS_HUGEPAGES + select MIPS_ASID_BITS_VARIABLE + help + Netlogic Microsystems XLP processors. +endchoice + +config CPU_MIPS32_3_5_FEATURES + bool "MIPS32 Release 3.5 Features" + depends on SYS_HAS_CPU_MIPS32_R3_5 + depends on CPU_MIPS32_R2 || CPU_MIPS32_R5 || CPU_MIPS32_R6 || \ + CPU_P5600 + help + Choose this option to build a kernel for release 2 or later of the + MIPS32 architecture including features from the 3.5 release such as + support for Enhanced Virtual Addressing (EVA). + +config CPU_MIPS32_3_5_EVA + bool "Enhanced Virtual Addressing (EVA)" + depends on CPU_MIPS32_3_5_FEATURES + select EVA + default y + help + Choose this option if you want to enable the Enhanced Virtual + Addressing (EVA) on your MIPS32 core (such as proAptiv). + One of its primary benefits is an increase in the maximum size + of lowmem (up to 3GB). If unsure, say 'N' here. + +config CPU_MIPS32_R5_FEATURES + bool "MIPS32 Release 5 Features" + depends on SYS_HAS_CPU_MIPS32_R5 + depends on CPU_MIPS32_R2 || CPU_MIPS32_R5 || CPU_P5600 + help + Choose this option to build a kernel for release 2 or later of the + MIPS32 architecture including features from release 5 such as + support for Extended Physical Addressing (XPA). + +config CPU_MIPS32_R5_XPA + bool "Extended Physical Addressing (XPA)" + depends on CPU_MIPS32_R5_FEATURES + depends on !EVA + depends on !PAGE_SIZE_4KB + depends on SYS_SUPPORTS_HIGHMEM + select XPA + select HIGHMEM + select PHYS_ADDR_T_64BIT + default n + help + Choose this option if you want to enable the Extended Physical + Addressing (XPA) on your MIPS32 core (such as P5600 series). The + benefit is to increase physical addressing equal to or greater + than 40 bits. Note that this has the side effect of turning on + 64-bit addressing which in turn makes the PTEs 64-bit in size. + If unsure, say 'N' here. + +if CPU_LOONGSON2F +config CPU_NOP_WORKAROUNDS + bool + +config CPU_JUMP_WORKAROUNDS + bool + +config CPU_LOONGSON2F_WORKAROUNDS + bool "Loongson 2F Workarounds" + default y + select CPU_NOP_WORKAROUNDS + select CPU_JUMP_WORKAROUNDS + help + Loongson 2F01 / 2F02 processors have the NOP & JUMP issues which + require workarounds. Without workarounds the system may hang + unexpectedly. For more information please refer to the gas + -mfix-loongson2f-nop and -mfix-loongson2f-jump options. + + Loongson 2F03 and later have fixed these issues and no workarounds + are needed. The workarounds have no significant side effect on them + but may decrease the performance of the system so this option should + be disabled unless the kernel is intended to be run on 2F01 or 2F02 + systems. + + If unsure, please say Y. +endif # CPU_LOONGSON2F + +config SYS_SUPPORTS_ZBOOT + bool + select HAVE_KERNEL_GZIP + select HAVE_KERNEL_BZIP2 + select HAVE_KERNEL_LZ4 + select HAVE_KERNEL_LZMA + select HAVE_KERNEL_LZO + select HAVE_KERNEL_XZ + select HAVE_KERNEL_ZSTD + +config SYS_SUPPORTS_ZBOOT_UART16550 + bool + select SYS_SUPPORTS_ZBOOT + +config SYS_SUPPORTS_ZBOOT_UART_PROM + bool + select SYS_SUPPORTS_ZBOOT + +config CPU_LOONGSON2EF + bool + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_64BIT_KERNEL + select CPU_SUPPORTS_HIGHMEM + select CPU_SUPPORTS_HUGEPAGES + select ARCH_HAS_PHYS_TO_DMA + +config CPU_LOONGSON32 + bool + select CPU_MIPS32 + select CPU_MIPSR2 + select CPU_HAS_PREFETCH + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_HIGHMEM + select CPU_SUPPORTS_CPUFREQ + +config CPU_BMIPS32_3300 + select SMP_UP if SMP + bool + +config CPU_BMIPS4350 + bool + select SYS_SUPPORTS_SMP + select SYS_SUPPORTS_HOTPLUG_CPU + +config CPU_BMIPS4380 + bool + select MIPS_L1_CACHE_SHIFT_6 + select SYS_SUPPORTS_SMP + select SYS_SUPPORTS_HOTPLUG_CPU + select CPU_HAS_RIXI + +config CPU_BMIPS5000 + bool + select MIPS_CPU_SCACHE + select MIPS_L1_CACHE_SHIFT_7 + select SYS_SUPPORTS_SMP + select SYS_SUPPORTS_HOTPLUG_CPU + select CPU_HAS_RIXI + +config SYS_HAS_CPU_LOONGSON64 + bool + select CPU_SUPPORTS_CPUFREQ + select CPU_HAS_RIXI + +config SYS_HAS_CPU_LOONGSON2E + bool + +config SYS_HAS_CPU_LOONGSON2F + bool + select CPU_SUPPORTS_CPUFREQ + select CPU_SUPPORTS_ADDRWINCFG if 64BIT + +config SYS_HAS_CPU_LOONGSON1B + bool + +config SYS_HAS_CPU_LOONGSON1C + bool + +config SYS_HAS_CPU_MIPS32_R1 + bool + +config SYS_HAS_CPU_MIPS32_R2 + bool + +config SYS_HAS_CPU_MIPS32_R3_5 + bool + +config SYS_HAS_CPU_MIPS32_R5 + bool + select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT + +config SYS_HAS_CPU_MIPS32_R6 + bool + select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT + +config SYS_HAS_CPU_MIPS64_R1 + bool + +config SYS_HAS_CPU_MIPS64_R2 + bool + +config SYS_HAS_CPU_MIPS64_R5 + bool + select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT + +config SYS_HAS_CPU_MIPS64_R6 + bool + select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT + +config SYS_HAS_CPU_P5600 + bool + select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT + +config SYS_HAS_CPU_R3000 + bool + +config SYS_HAS_CPU_TX39XX + bool + +config SYS_HAS_CPU_VR41XX + bool + +config SYS_HAS_CPU_R4X00 + bool + +config SYS_HAS_CPU_TX49XX + bool + +config SYS_HAS_CPU_R5000 + bool + +config SYS_HAS_CPU_R5500 + bool + +config SYS_HAS_CPU_NEVADA + bool + +config SYS_HAS_CPU_R10000 + bool + select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT + +config SYS_HAS_CPU_RM7000 + bool + +config SYS_HAS_CPU_SB1 + bool + +config SYS_HAS_CPU_CAVIUM_OCTEON + bool + +config SYS_HAS_CPU_BMIPS + bool + +config SYS_HAS_CPU_BMIPS32_3300 + bool + select SYS_HAS_CPU_BMIPS + +config SYS_HAS_CPU_BMIPS4350 + bool + select SYS_HAS_CPU_BMIPS + +config SYS_HAS_CPU_BMIPS4380 + bool + select SYS_HAS_CPU_BMIPS + +config SYS_HAS_CPU_BMIPS5000 + bool + select SYS_HAS_CPU_BMIPS + select ARCH_HAS_SYNC_DMA_FOR_CPU + +config SYS_HAS_CPU_XLR + bool + +config SYS_HAS_CPU_XLP + bool + +# +# CPU may reorder R->R, R->W, W->R, W->W +# Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC +# +config WEAK_ORDERING + bool + +# +# CPU may reorder reads and writes beyond LL/SC +# CPU may reorder R->LL, R->LL, W->LL, W->LL, R->SC, R->SC, W->SC, W->SC +# +config WEAK_REORDERING_BEYOND_LLSC + bool +endmenu + +# +# These two indicate any level of the MIPS32 and MIPS64 architecture +# +config CPU_MIPS32 + bool + default y if CPU_MIPS32_R1 || CPU_MIPS32_R2 || CPU_MIPS32_R5 || \ + CPU_MIPS32_R6 || CPU_P5600 + +config CPU_MIPS64 + bool + default y if CPU_MIPS64_R1 || CPU_MIPS64_R2 || CPU_MIPS64_R5 || \ + CPU_MIPS64_R6 + +# +# These indicate the revision of the architecture +# +config CPU_MIPSR1 + bool + default y if CPU_MIPS32_R1 || CPU_MIPS64_R1 + +config CPU_MIPSR2 + bool + default y if CPU_MIPS32_R2 || CPU_MIPS64_R2 || CPU_CAVIUM_OCTEON + select CPU_HAS_RIXI + select CPU_HAS_DIEI if !CPU_DIEI_BROKEN + select MIPS_SPRAM + +config CPU_MIPSR5 + bool + default y if CPU_MIPS32_R5 || CPU_MIPS64_R5 || CPU_P5600 + select CPU_HAS_RIXI + select CPU_HAS_DIEI if !CPU_DIEI_BROKEN + select MIPS_SPRAM + +config CPU_MIPSR6 + bool + default y if CPU_MIPS32_R6 || CPU_MIPS64_R6 + select CPU_HAS_RIXI + select CPU_HAS_DIEI if !CPU_DIEI_BROKEN + select HAVE_ARCH_BITREVERSE + select MIPS_ASID_BITS_VARIABLE + select MIPS_CRC_SUPPORT + select MIPS_SPRAM + +config TARGET_ISA_REV + int + default 1 if CPU_MIPSR1 + default 2 if CPU_MIPSR2 + default 5 if CPU_MIPSR5 + default 6 if CPU_MIPSR6 + default 0 + help + Reflects the ISA revision being targeted by the kernel build. This + is effectively the Kconfig equivalent of MIPS_ISA_REV. + +config EVA + bool + +config XPA + bool + +config SYS_SUPPORTS_32BIT_KERNEL + bool +config SYS_SUPPORTS_64BIT_KERNEL + bool +config CPU_SUPPORTS_32BIT_KERNEL + bool +config CPU_SUPPORTS_64BIT_KERNEL + bool +config CPU_SUPPORTS_CPUFREQ + bool +config CPU_SUPPORTS_ADDRWINCFG + bool +config CPU_SUPPORTS_HUGEPAGES + bool + depends on !(32BIT && (PHYS_ADDR_T_64BIT || EVA)) +config MIPS_PGD_C0_CONTEXT + bool + default y if 64BIT && (CPU_MIPSR2 || CPU_MIPSR6) && !CPU_XLP + +# +# Set to y for ptrace access to watch registers. +# +config HARDWARE_WATCHPOINTS + bool + default y if CPU_MIPSR1 || CPU_MIPSR2 || CPU_MIPSR6 + +menu "Kernel type" + +choice + prompt "Kernel code model" + help + You should only select this option if you have a workload that + actually benefits from 64-bit processing or if your machine has + large memory. You will only be presented a single option in this + menu if your system does not support both 32-bit and 64-bit kernels. + +config 32BIT + bool "32-bit kernel" + depends on CPU_SUPPORTS_32BIT_KERNEL && SYS_SUPPORTS_32BIT_KERNEL + select TRAD_SIGNALS + help + Select this option if you want to build a 32-bit kernel. + +config 64BIT + bool "64-bit kernel" + depends on CPU_SUPPORTS_64BIT_KERNEL && SYS_SUPPORTS_64BIT_KERNEL + help + Select this option if you want to build a 64-bit kernel. + +endchoice + +config KVM_GUEST + bool "KVM Guest Kernel" + depends on CPU_MIPS32_R2 + depends on BROKEN_ON_SMP + help + Select this option if building a guest kernel for KVM (Trap & Emulate) + mode. + +config KVM_GUEST_TIMER_FREQ + int "Count/Compare Timer Frequency (MHz)" + depends on KVM_GUEST + default 100 + help + Set this to non-zero if building a guest kernel for KVM to skip RTC + emulation when determining guest CPU Frequency. Instead, the guest's + timer frequency is specified directly. + +config MIPS_VA_BITS_48 + bool "48 bits virtual memory" + depends on 64BIT + help + Support a maximum at least 48 bits of application virtual + memory. Default is 40 bits or less, depending on the CPU. + For page sizes 16k and above, this option results in a small + memory overhead for page tables. For 4k page size, a fourth + level of page tables is added which imposes both a memory + overhead as well as slower TLB fault handling. + + If unsure, say N. + +choice + prompt "Kernel page size" + default PAGE_SIZE_4KB + +config PAGE_SIZE_4KB + bool "4kB" + depends on !CPU_LOONGSON2EF && !CPU_LOONGSON64 + help + This option select the standard 4kB Linux page size. On some + R3000-family processors this is the only available page size. Using + 4kB page size will minimize memory consumption and is therefore + recommended for low memory systems. + +config PAGE_SIZE_8KB + bool "8kB" + depends on CPU_CAVIUM_OCTEON + depends on !MIPS_VA_BITS_48 + help + Using 8kB page size will result in higher performance kernel at + the price of higher memory consumption. This option is available + only on cnMIPS processors. Note that you will need a suitable Linux + distribution to support this. + +config PAGE_SIZE_16KB + bool "16kB" + depends on !CPU_R3000 && !CPU_TX39XX + help + Using 16kB page size will result in higher performance kernel at + the price of higher memory consumption. This option is available on + all non-R3000 family processors. Note that you will need a suitable + Linux distribution to support this. + +config PAGE_SIZE_32KB + bool "32kB" + depends on CPU_CAVIUM_OCTEON + depends on !MIPS_VA_BITS_48 + help + Using 32kB page size will result in higher performance kernel at + the price of higher memory consumption. This option is available + only on cnMIPS cores. Note that you will need a suitable Linux + distribution to support this. + +config PAGE_SIZE_64KB + bool "64kB" + depends on !CPU_R3000 && !CPU_TX39XX + help + Using 64kB page size will result in higher performance kernel at + the price of higher memory consumption. This option is available on + all non-R3000 family processor. Not that at the time of this + writing this option is still high experimental. + +endchoice + +config FORCE_MAX_ZONEORDER + int "Maximum zone order" + range 14 64 if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_64KB + default "14" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_64KB + range 13 64 if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_32KB + default "13" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_32KB + range 12 64 if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_16KB + default "12" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_16KB + range 0 64 + default "11" + help + The kernel memory allocator divides physically contiguous memory + blocks into "zones", where each zone is a power of two number of + pages. This option selects the largest power of two that the kernel + keeps in the memory allocator. If you need to allocate very large + blocks of physically contiguous memory, then you may need to + increase this value. + + This config option is actually maximum order plus one. For example, + a value of 11 means that the largest free memory block is 2^10 pages. + + The page size is not necessarily 4KB. Keep this in mind + when choosing a value for this option. + +config BOARD_SCACHE + bool + +config IP22_CPU_SCACHE + bool + select BOARD_SCACHE + +# +# Support for a MIPS32 / MIPS64 style S-caches +# +config MIPS_CPU_SCACHE + bool + select BOARD_SCACHE + +config R5000_CPU_SCACHE + bool + select BOARD_SCACHE + +config RM7000_CPU_SCACHE + bool + select BOARD_SCACHE + +config SIBYTE_DMA_PAGEOPS + bool "Use DMA to clear/copy pages" + depends on CPU_SB1 + help + Instead of using the CPU to zero and copy pages, use a Data Mover + channel. These DMA channels are otherwise unused by the standard + SiByte Linux port. Seems to give a small performance benefit. + +config CPU_HAS_PREFETCH + bool + +config CPU_GENERIC_DUMP_TLB + bool + default y if !(CPU_R3000 || CPU_TX39XX) + +config MIPS_FP_SUPPORT + bool "Floating Point support" if EXPERT + default y + help + Select y to include support for floating point in the kernel + including initialization of FPU hardware, FP context save & restore + and emulation of an FPU where necessary. Without this support any + userland program attempting to use floating point instructions will + receive a SIGILL. + + If you know that your userland will not attempt to use floating point + instructions then you can say n here to shrink the kernel a little. + + If unsure, say y. + +config CPU_R2300_FPU + bool + depends on MIPS_FP_SUPPORT + default y if CPU_R3000 || CPU_TX39XX + +config CPU_R3K_TLB + bool + +config CPU_R4K_FPU + bool + depends on MIPS_FP_SUPPORT + default y if !CPU_R2300_FPU + +config CPU_R4K_CACHE_TLB + bool + default y if !(CPU_R3K_TLB || CPU_SB1 || CPU_CAVIUM_OCTEON) + +config MIPS_MT_SMP + bool "MIPS MT SMP support (1 TC on each available VPE)" + default y + depends on SYS_SUPPORTS_MULTITHREADING && !CPU_MIPSR6 && !CPU_MICROMIPS + select CPU_MIPSR2_IRQ_VI + select CPU_MIPSR2_IRQ_EI + select SYNC_R4K + select MIPS_MT + select SMP + select SMP_UP + select SYS_SUPPORTS_SMP + select SYS_SUPPORTS_SCHED_SMT + select MIPS_PERF_SHARED_TC_COUNTERS + help + This is a kernel model which is known as SMVP. This is supported + on cores with the MT ASE and uses the available VPEs to implement + virtual processors which supports SMP. This is equivalent to the + Intel Hyperthreading feature. For further information go to + . + +config MIPS_MT + bool + +config SCHED_SMT + bool "SMT (multithreading) scheduler support" + depends on SYS_SUPPORTS_SCHED_SMT + default n + help + SMT scheduler support improves the CPU scheduler's decision making + when dealing with MIPS MT enabled cores at a cost of slightly + increased overhead in some places. If unsure say N here. + +config SYS_SUPPORTS_SCHED_SMT + bool + +config SYS_SUPPORTS_MULTITHREADING + bool + +config MIPS_MT_FPAFF + bool "Dynamic FPU affinity for FP-intensive threads" + default y + depends on MIPS_MT_SMP + +config MIPSR2_TO_R6_EMULATOR + bool "MIPS R2-to-R6 emulator" + depends on CPU_MIPSR6 + depends on MIPS_FP_SUPPORT + default y + help + Choose this option if you want to run non-R6 MIPS userland code. + Even if you say 'Y' here, the emulator will still be disabled by + default. You can enable it using the 'mipsr2emu' kernel option. + The only reason this is a build-time option is to save ~14K from the + final kernel image. + +config SYS_SUPPORTS_VPE_LOADER + bool + depends on SYS_SUPPORTS_MULTITHREADING + help + Indicates that the platform supports the VPE loader, and provides + physical_memsize. + +config MIPS_VPE_LOADER + bool "VPE loader support." + depends on SYS_SUPPORTS_VPE_LOADER && MODULES + select CPU_MIPSR2_IRQ_VI + select CPU_MIPSR2_IRQ_EI + select MIPS_MT + help + Includes a loader for loading an elf relocatable object + onto another VPE and running it. + +config MIPS_VPE_LOADER_CMP + bool + default "y" + depends on MIPS_VPE_LOADER && MIPS_CMP + +config MIPS_VPE_LOADER_MT + bool + default "y" + depends on MIPS_VPE_LOADER && !MIPS_CMP + +config MIPS_VPE_LOADER_TOM + bool "Load VPE program into memory hidden from linux" + depends on MIPS_VPE_LOADER + default y + help + The loader can use memory that is present but has been hidden from + Linux using the kernel command line option "mem=xxMB". It's up to + you to ensure the amount you put in the option and the space your + program requires is less or equal to the amount physically present. + +config MIPS_VPE_APSP_API + bool "Enable support for AP/SP API (RTLX)" + depends on MIPS_VPE_LOADER + +config MIPS_VPE_APSP_API_CMP + bool + default "y" + depends on MIPS_VPE_APSP_API && MIPS_CMP + +config MIPS_VPE_APSP_API_MT + bool + default "y" + depends on MIPS_VPE_APSP_API && !MIPS_CMP + +config MIPS_CMP + bool "MIPS CMP framework support (DEPRECATED)" + depends on SYS_SUPPORTS_MIPS_CMP && !CPU_MIPSR6 + select SMP + select SYNC_R4K + select SYS_SUPPORTS_SMP + select WEAK_ORDERING + default n + help + Select this if you are using a bootloader which implements the "CMP + framework" protocol (ie. YAMON) and want your kernel to make use of + its ability to start secondary CPUs. + + Unless you have a specific need, you should use CONFIG_MIPS_CPS + instead of this. + +config MIPS_CPS + bool "MIPS Coherent Processing System support" + depends on SYS_SUPPORTS_MIPS_CPS + select MIPS_CM + select MIPS_CPS_PM if HOTPLUG_CPU + select SMP + select SYNC_R4K if (CEVT_R4K || CSRC_R4K) + select SYS_SUPPORTS_HOTPLUG_CPU + select SYS_SUPPORTS_SCHED_SMT if CPU_MIPSR6 + select SYS_SUPPORTS_SMP + select WEAK_ORDERING + help + Select this if you wish to run an SMP kernel across multiple cores + within a MIPS Coherent Processing System. When this option is + enabled the kernel will probe for other cores and boot them with + no external assistance. It is safe to enable this when hardware + support is unavailable. + +config MIPS_CPS_PM + depends on MIPS_CPS + bool + +config MIPS_CM + bool + select MIPS_CPC + +config MIPS_CPC + bool + +config SB1_PASS_2_WORKAROUNDS + bool + depends on CPU_SB1 && (CPU_SB1_PASS_2_2 || CPU_SB1_PASS_2) + default y + +config SB1_PASS_2_1_WORKAROUNDS + bool + depends on CPU_SB1 && CPU_SB1_PASS_2 + default y + +choice + prompt "SmartMIPS or microMIPS ASE support" + +config CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS + bool "None" + help + Select this if you want neither microMIPS nor SmartMIPS support + +config CPU_HAS_SMARTMIPS + depends on SYS_SUPPORTS_SMARTMIPS + bool "SmartMIPS" + help + SmartMIPS is a extension of the MIPS32 architecture aimed at + increased security at both hardware and software level for + smartcards. Enabling this option will allow proper use of the + SmartMIPS instructions by Linux applications. However a kernel with + this option will not work on a MIPS core without SmartMIPS core. If + you don't know you probably don't have SmartMIPS and should say N + here. + +config CPU_MICROMIPS + depends on 32BIT && SYS_SUPPORTS_MICROMIPS && !CPU_MIPSR6 + bool "microMIPS" + help + When this option is enabled the kernel will be built using the + microMIPS ISA + +endchoice + +config CPU_HAS_MSA + bool "Support for the MIPS SIMD Architecture" + depends on CPU_SUPPORTS_MSA + depends on MIPS_FP_SUPPORT + depends on 64BIT || MIPS_O32_FP64_SUPPORT + help + MIPS SIMD Architecture (MSA) introduces 128 bit wide vector registers + and a set of SIMD instructions to operate on them. When this option + is enabled the kernel will support allocating & switching MSA + vector register contexts. If you know that your kernel will only be + running on CPUs which do not support MSA or that your userland will + not be making use of it then you may wish to say N here to reduce + the size & complexity of your kernel. + + If unsure, say Y. + +config CPU_HAS_WB + bool + +config XKS01 + bool + +config CPU_HAS_DIEI + depends on !CPU_DIEI_BROKEN + bool + +config CPU_DIEI_BROKEN + bool + +config CPU_HAS_RIXI + bool + +config CPU_NO_LOAD_STORE_LR + bool + help + CPU lacks support for unaligned load and store instructions: + LWL, LWR, SWL, SWR (Load/store word left/right). + LDL, LDR, SDL, SDR (Load/store doubleword left/right, for 64bit + systems). + +# +# Vectored interrupt mode is an R2 feature +# +config CPU_MIPSR2_IRQ_VI + bool + +# +# Extended interrupt mode is an R2 feature +# +config CPU_MIPSR2_IRQ_EI + bool + +config CPU_HAS_SYNC + bool + depends on !CPU_R3000 + default y + +# +# CPU non-features +# +config CPU_DADDI_WORKAROUNDS + bool + +config CPU_R4000_WORKAROUNDS + bool + select CPU_R4400_WORKAROUNDS + +config CPU_R4400_WORKAROUNDS + bool + +config CPU_R4X00_BUGS64 + bool + default y if SYS_HAS_CPU_R4X00 && 64BIT && (TARGET_ISA_REV < 1) + +config MIPS_ASID_SHIFT + int + default 6 if CPU_R3000 || CPU_TX39XX + default 0 + +config MIPS_ASID_BITS + int + default 0 if MIPS_ASID_BITS_VARIABLE + default 6 if CPU_R3000 || CPU_TX39XX + default 8 + +config MIPS_ASID_BITS_VARIABLE + bool + +config MIPS_CRC_SUPPORT + bool + +# R4600 erratum. Due to the lack of errata information the exact +# technical details aren't known. I've experimentally found that disabling +# interrupts during indexed I-cache flushes seems to be sufficient to deal +# with the issue. +config WAR_R4600_V1_INDEX_ICACHEOP + bool + +# Pleasures of the R4600 V1.x. Cite from the IDT R4600 V1.7 errata: +# +# 18. The CACHE instructions Hit_Writeback_Invalidate_D, Hit_Writeback_D, +# Hit_Invalidate_D and Create_Dirty_Excl_D should only be +# executed if there is no other dcache activity. If the dcache is +# accessed for another instruction immeidately preceding when these +# cache instructions are executing, it is possible that the dcache +# tag match outputs used by these cache instructions will be +# incorrect. These cache instructions should be preceded by at least +# four instructions that are not any kind of load or store +# instruction. +# +# This is not allowed: lw +# nop +# nop +# nop +# cache Hit_Writeback_Invalidate_D +# +# This is allowed: lw +# nop +# nop +# nop +# nop +# cache Hit_Writeback_Invalidate_D +config WAR_R4600_V1_HIT_CACHEOP + bool + +# Writeback and invalidate the primary cache dcache before DMA. +# +# R4600 v2.0 bug: "The CACHE instructions Hit_Writeback_Inv_D, +# Hit_Writeback_D, Hit_Invalidate_D and Create_Dirty_Exclusive_D will only +# operate correctly if the internal data cache refill buffer is empty. These +# CACHE instructions should be separated from any potential data cache miss +# by a load instruction to an uncached address to empty the response buffer." +# (Revision 2.0 device errata from IDT available on https://www.idt.com/ +# in .pdf format.) +config WAR_R4600_V2_HIT_CACHEOP + bool + +# From TX49/H2 manual: "If the instruction (i.e. CACHE) is issued for +# the line which this instruction itself exists, the following +# operation is not guaranteed." +# +# Workaround: do two phase flushing for Index_Invalidate_I +config WAR_TX49XX_ICACHE_INDEX_INV + bool + +# The RM7000 processors and the E9000 cores have a bug (though PMC-Sierra +# opposes it being called that) where invalid instructions in the same +# I-cache line worth of instructions being fetched may case spurious +# exceptions. +config WAR_ICACHE_REFILLS + bool + +# On the R10000 up to version 2.6 (not sure about 2.7) there is a bug that +# may cause ll / sc and lld / scd sequences to execute non-atomically. +config WAR_R10000_LLSC + bool + +# 34K core erratum: "Problems Executing the TLBR Instruction" +config WAR_MIPS34K_MISSED_ITLB + bool + +# +# - Highmem only makes sense for the 32-bit kernel. +# - The current highmem code will only work properly on physically indexed +# caches such as R3000, SB1, R7000 or those that look like they're virtually +# indexed such as R4000/R4400 SC and MC versions or R10000. So for the +# moment we protect the user and offer the highmem option only on machines +# where it's known to be safe. This will not offer highmem on a few systems +# such as MIPS32 and MIPS64 CPUs which may have virtual and physically +# indexed CPUs but we're playing safe. +# - We use SYS_SUPPORTS_HIGHMEM to offer highmem only for systems where we +# know they might have memory configurations that could make use of highmem +# support. +# +config HIGHMEM + bool "High Memory Support" + depends on 32BIT && CPU_SUPPORTS_HIGHMEM && SYS_SUPPORTS_HIGHMEM && !CPU_MIPS32_3_5_EVA + +config CPU_SUPPORTS_HIGHMEM + bool + +config SYS_SUPPORTS_HIGHMEM + bool + +config SYS_SUPPORTS_SMARTMIPS + bool + +config SYS_SUPPORTS_MICROMIPS + bool + +config SYS_SUPPORTS_MIPS16 + bool + help + This option must be set if a kernel might be executed on a MIPS16- + enabled CPU even if MIPS16 is not actually being used. In other + words, it makes the kernel MIPS16-tolerant. + +config CPU_SUPPORTS_MSA + bool + +config ARCH_FLATMEM_ENABLE + def_bool y + depends on !NUMA && !CPU_LOONGSON2EF + +config ARCH_SPARSEMEM_ENABLE + bool + select SPARSEMEM_STATIC if !SGI_IP27 + +config NUMA + bool "NUMA Support" + depends on SYS_SUPPORTS_NUMA + help + Say Y to compile the kernel to support NUMA (Non-Uniform Memory + Access). This option improves performance on systems with more + than two nodes; on two node systems it is generally better to + leave it disabled; on single node systems leave this option + disabled. + +config SYS_SUPPORTS_NUMA + bool + +config HAVE_SETUP_PER_CPU_AREA + def_bool y + depends on NUMA + +config NEED_PER_CPU_EMBED_FIRST_CHUNK + def_bool y + depends on NUMA + +config RELOCATABLE + bool "Relocatable kernel" + depends on SYS_SUPPORTS_RELOCATABLE + depends on CPU_MIPS32_R2 || CPU_MIPS64_R2 || \ + CPU_MIPS32_R5 || CPU_MIPS64_R5 || \ + CPU_MIPS32_R6 || CPU_MIPS64_R6 || \ + CPU_P5600 || CAVIUM_OCTEON_SOC + help + This builds a kernel image that retains relocation information + so it can be loaded someplace besides the default 1MB. + The relocations make the kernel binary about 15% larger, + but are discarded at runtime + +config RELOCATION_TABLE_SIZE + hex "Relocation table size" + depends on RELOCATABLE + range 0x0 0x01000000 + default "0x00100000" + help + A table of relocation data will be appended to the kernel binary + and parsed at boot to fix up the relocated kernel. + + This option allows the amount of space reserved for the table to be + adjusted, although the default of 1Mb should be ok in most cases. + + The build will fail and a valid size suggested if this is too small. + + If unsure, leave at the default value. + +config RANDOMIZE_BASE + bool "Randomize the address of the kernel image" + depends on RELOCATABLE + help + Randomizes the physical and virtual address at which the + kernel image is loaded, as a security feature that + deters exploit attempts relying on knowledge of the location + of kernel internals. + + Entropy is generated using any coprocessor 0 registers available. + + The kernel will be offset by up to RANDOMIZE_BASE_MAX_OFFSET. + + If unsure, say N. + +config RANDOMIZE_BASE_MAX_OFFSET + hex "Maximum kASLR offset" if EXPERT + depends on RANDOMIZE_BASE + range 0x0 0x40000000 if EVA || 64BIT + range 0x0 0x08000000 + default "0x01000000" + help + When kASLR is active, this provides the maximum offset that will + be applied to the kernel image. It should be set according to the + amount of physical RAM available in the target system minus + PHYSICAL_START and must be a power of 2. + + This is limited by the size of KSEG0, 256Mb on 32-bit or 1Gb with + EVA or 64-bit. The default is 16Mb. + +config NODES_SHIFT + int + default "6" + depends on NEED_MULTIPLE_NODES + +config HW_PERF_EVENTS + bool "Enable hardware performance counter support for perf events" + depends on PERF_EVENTS && !OPROFILE && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON || CPU_XLP || CPU_LOONGSON64) + default y + help + Enable hardware performance counter support for perf events. If + disabled, perf events will use software events only. + +config DMI + bool "Enable DMI scanning" + depends on MACH_LOONGSON64 + select DMI_SCAN_MACHINE_NON_EFI_FALLBACK + default y + help + Enabled scanning of DMI to identify machine quirks. Say Y + here unless you have verified that your setup is not + affected by entries in the DMI blacklist. Required by PNP + BIOS code. + +config SMP + bool "Multi-Processing support" + depends on SYS_SUPPORTS_SMP + help + This enables support for systems with more than one CPU. If you have + a system with only one CPU, say N. If you have a system with more + than one CPU, say Y. + + If you say N here, the kernel will run on uni- and multiprocessor + machines, but will use only one CPU of a multiprocessor machine. If + you say Y here, the kernel will run on many, but not all, + uniprocessor machines. On a uniprocessor machine, the kernel + will run faster if you say N here. + + People using multiprocessor machines who say Y here should also say + Y to "Enhanced Real Time Clock Support", below. + + See also the SMP-HOWTO available at + . + + If you don't know what to do here, say N. + +config HOTPLUG_CPU + bool "Support for hot-pluggable CPUs" + depends on SMP && SYS_SUPPORTS_HOTPLUG_CPU + help + Say Y here to allow turning CPUs off and on. CPUs can be + controlled through /sys/devices/system/cpu. + (Note: power management support will enable this option + automatically on SMP systems. ) + Say N if you want to disable CPU hotplug. + +config SMP_UP + bool + +config SYS_SUPPORTS_MIPS_CMP + bool + +config SYS_SUPPORTS_MIPS_CPS + bool + +config SYS_SUPPORTS_SMP + bool + +config NR_CPUS_DEFAULT_4 + bool + +config NR_CPUS_DEFAULT_8 + bool + +config NR_CPUS_DEFAULT_16 + bool + +config NR_CPUS_DEFAULT_32 + bool + +config NR_CPUS_DEFAULT_64 + bool + +config NR_CPUS + int "Maximum number of CPUs (2-256)" + range 2 256 + depends on SMP + default "4" if NR_CPUS_DEFAULT_4 + default "8" if NR_CPUS_DEFAULT_8 + default "16" if NR_CPUS_DEFAULT_16 + default "32" if NR_CPUS_DEFAULT_32 + default "64" if NR_CPUS_DEFAULT_64 + help + This allows you to specify the maximum number of CPUs which this + kernel will support. The maximum supported value is 32 for 32-bit + kernel and 64 for 64-bit kernels; the minimum value which makes + sense is 1 for Qemu (useful only for kernel debugging purposes) + and 2 for all others. + + This is purely to save memory - each supported CPU adds + approximately eight kilobytes to the kernel image. For best + performance should round up your number of processors to the next + power of two. + +config MIPS_PERF_SHARED_TC_COUNTERS + bool + +config MIPS_NR_CPU_NR_MAP_1024 + bool + +config MIPS_NR_CPU_NR_MAP + int + depends on SMP + default 1024 if MIPS_NR_CPU_NR_MAP_1024 + default NR_CPUS if !MIPS_NR_CPU_NR_MAP_1024 + +# +# Timer Interrupt Frequency Configuration +# + +choice + prompt "Timer frequency" + default HZ_250 + help + Allows the configuration of the timer frequency. + + config HZ_24 + bool "24 HZ" if SYS_SUPPORTS_24HZ || SYS_SUPPORTS_ARBIT_HZ + + config HZ_48 + bool "48 HZ" if SYS_SUPPORTS_48HZ || SYS_SUPPORTS_ARBIT_HZ + + config HZ_100 + bool "100 HZ" if SYS_SUPPORTS_100HZ || SYS_SUPPORTS_ARBIT_HZ + + config HZ_128 + bool "128 HZ" if SYS_SUPPORTS_128HZ || SYS_SUPPORTS_ARBIT_HZ + + config HZ_250 + bool "250 HZ" if SYS_SUPPORTS_250HZ || SYS_SUPPORTS_ARBIT_HZ + + config HZ_256 + bool "256 HZ" if SYS_SUPPORTS_256HZ || SYS_SUPPORTS_ARBIT_HZ + + config HZ_1000 + bool "1000 HZ" if SYS_SUPPORTS_1000HZ || SYS_SUPPORTS_ARBIT_HZ + + config HZ_1024 + bool "1024 HZ" if SYS_SUPPORTS_1024HZ || SYS_SUPPORTS_ARBIT_HZ + +endchoice + +config SYS_SUPPORTS_24HZ + bool + +config SYS_SUPPORTS_48HZ + bool + +config SYS_SUPPORTS_100HZ + bool + +config SYS_SUPPORTS_128HZ + bool + +config SYS_SUPPORTS_250HZ + bool + +config SYS_SUPPORTS_256HZ + bool + +config SYS_SUPPORTS_1000HZ + bool + +config SYS_SUPPORTS_1024HZ + bool + +config SYS_SUPPORTS_ARBIT_HZ + bool + default y if !SYS_SUPPORTS_24HZ && \ + !SYS_SUPPORTS_48HZ && \ + !SYS_SUPPORTS_100HZ && \ + !SYS_SUPPORTS_128HZ && \ + !SYS_SUPPORTS_250HZ && \ + !SYS_SUPPORTS_256HZ && \ + !SYS_SUPPORTS_1000HZ && \ + !SYS_SUPPORTS_1024HZ + +config HZ + int + default 24 if HZ_24 + default 48 if HZ_48 + default 100 if HZ_100 + default 128 if HZ_128 + default 250 if HZ_250 + default 256 if HZ_256 + default 1000 if HZ_1000 + default 1024 if HZ_1024 + +config SCHED_HRTICK + def_bool HIGH_RES_TIMERS + +config KEXEC + bool "Kexec system call" + select KEXEC_CORE + help + kexec is a system call that implements the ability to shutdown your + current kernel, and to start another kernel. It is like a reboot + but it is independent of the system firmware. And like a reboot + you can start any kernel with it, not just Linux. + + The name comes from the similarity to the exec system call. + + It is an ongoing process to be certain the hardware in a machine + is properly shutdown, so do not be surprised if this code does not + initially work for you. As of this writing the exact hardware + interface is strongly in flux, so no good recommendation can be + made. + +config CRASH_DUMP + bool "Kernel crash dumps" + help + Generate crash dump after being started by kexec. + This should be normally only set in special crash dump kernels + which are loaded in the main kernel with kexec-tools into + a specially reserved region and then later executed after + a crash by kdump/kexec. The crash dump kernel must be compiled + to a memory address not used by the main kernel or firmware using + PHYSICAL_START. + +config PHYSICAL_START + hex "Physical address where the kernel is loaded" + default "0xffffffff84000000" + depends on CRASH_DUMP + help + This gives the CKSEG0 or KSEG0 address where the kernel is loaded. + If you plan to use kernel for capturing the crash dump change + this value to start of the reserved region (the "X" value as + specified in the "crashkernel=YM@XM" command line boot parameter + passed to the panic-ed kernel). + +config MIPS_O32_FP64_SUPPORT + bool "Support for O32 binaries using 64-bit FP" if !CPU_MIPSR6 + depends on 32BIT || MIPS32_O32 + help + When this is enabled, the kernel will support use of 64-bit floating + point registers with binaries using the O32 ABI along with the + EF_MIPS_FP64 ELF header flag (typically built with -mfp64). On + 32-bit MIPS systems this support is at the cost of increasing the + size and complexity of the compiled FPU emulator. Thus if you are + running a MIPS32 system and know that none of your userland binaries + will require 64-bit floating point, you may wish to reduce the size + of your kernel & potentially improve FP emulation performance by + saying N here. + + Although binutils currently supports use of this flag the details + concerning its effect upon the O32 ABI in userland are still being + worked on. In order to avoid userland becoming dependant upon current + behaviour before the details have been finalised, this option should + be considered experimental and only enabled by those working upon + said details. + + If unsure, say N. + +config USE_OF + bool + select OF + select OF_EARLY_FLATTREE + select IRQ_DOMAIN + +config UHI_BOOT + bool + +config BUILTIN_DTB + bool + +choice + prompt "Kernel appended dtb support" if USE_OF + default MIPS_NO_APPENDED_DTB + + config MIPS_NO_APPENDED_DTB + bool "None" + help + Do not enable appended dtb support. + + config MIPS_ELF_APPENDED_DTB + bool "vmlinux" + help + With this option, the boot code will look for a device tree binary + DTB) included in the vmlinux ELF section .appended_dtb. By default + it is empty and the DTB can be appended using binutils command + objcopy: + + objcopy --update-section .appended_dtb=.dtb vmlinux + + This is meant as a backward compatiblity convenience for those + systems with a bootloader that can't be upgraded to accommodate + the documented boot protocol using a device tree. + + config MIPS_RAW_APPENDED_DTB + bool "vmlinux.bin or vmlinuz.bin" + help + With this option, the boot code will look for a device tree binary + DTB) appended to raw vmlinux.bin or vmlinuz.bin. + (e.g. cat vmlinux.bin .dtb > vmlinux_w_dtb). + + This is meant as a backward compatibility convenience for those + systems with a bootloader that can't be upgraded to accommodate + the documented boot protocol using a device tree. + + Beware that there is very little in terms of protection against + this option being confused by leftover garbage in memory that might + look like a DTB header after a reboot if no actual DTB is appended + to vmlinux.bin. Do not leave this option active in a production kernel + if you don't intend to always append a DTB. +endchoice + +choice + prompt "Kernel command line type" if !CMDLINE_OVERRIDE + default MIPS_CMDLINE_FROM_DTB if USE_OF && !ATH79 && !MACH_INGENIC && \ + !MACH_LOONGSON64 && !MIPS_MALTA && \ + !CAVIUM_OCTEON_SOC + default MIPS_CMDLINE_FROM_BOOTLOADER + + config MIPS_CMDLINE_FROM_DTB + depends on USE_OF + bool "Dtb kernel arguments if available" + + config MIPS_CMDLINE_DTB_EXTEND + depends on USE_OF + bool "Extend dtb kernel arguments with bootloader arguments" + + config MIPS_CMDLINE_FROM_BOOTLOADER + bool "Bootloader kernel arguments if available" + + config MIPS_CMDLINE_BUILTIN_EXTEND + depends on CMDLINE_BOOL + bool "Extend builtin kernel arguments with bootloader arguments" +endchoice + +endmenu + +config LOCKDEP_SUPPORT + bool + default y + +config STACKTRACE_SUPPORT + bool + default y + +config PGTABLE_LEVELS + int + default 4 if PAGE_SIZE_4KB && MIPS_VA_BITS_48 + default 3 if 64BIT && (!PAGE_SIZE_64KB || MIPS_VA_BITS_48) + default 2 + +config MIPS_AUTO_PFN_OFFSET + bool + +menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)" + +config PCI_DRIVERS_GENERIC + select PCI_DOMAINS_GENERIC if PCI + bool + +config PCI_DRIVERS_LEGACY + def_bool !PCI_DRIVERS_GENERIC + select NO_GENERIC_PCI_IOPORT_MAP + select PCI_DOMAINS if PCI + +# +# ISA support is now enabled via select. Too many systems still have the one +# or other ISA chip on the board that users don't know about so don't expect +# users to choose the right thing ... +# +config ISA + bool + +config TC + bool "TURBOchannel support" + depends on MACH_DECSTATION + help + TURBOchannel is a DEC (now Compaq (now HP)) bus for Alpha and MIPS + processors. TURBOchannel programming specifications are available + at: + + and: + + Linux driver support status is documented at: + + +config MMU + bool + default y + +config ARCH_MMAP_RND_BITS_MIN + default 12 if 64BIT + default 8 + +config ARCH_MMAP_RND_BITS_MAX + default 18 if 64BIT + default 15 + +config ARCH_MMAP_RND_COMPAT_BITS_MIN + default 8 + +config ARCH_MMAP_RND_COMPAT_BITS_MAX + default 15 + +config I8253 + bool + select CLKSRC_I8253 + select CLKEVT_I8253 + select MIPS_EXTERNAL_TIMER + +config ZONE_DMA + bool + +config ZONE_DMA32 + bool + +endmenu + +config TRAD_SIGNALS + bool + +config MIPS32_COMPAT + bool + +config COMPAT + bool + +config SYSVIPC_COMPAT + bool + +config MIPS32_O32 + bool "Kernel support for o32 binaries" + depends on 64BIT + select ARCH_WANT_OLD_COMPAT_IPC + select COMPAT + select MIPS32_COMPAT + select SYSVIPC_COMPAT if SYSVIPC + help + Select this option if you want to run o32 binaries. These are pure + 32-bit binaries as used by the 32-bit Linux/MIPS port. Most of + existing binaries are in this format. + + If unsure, say Y. + +config MIPS32_N32 + bool "Kernel support for n32 binaries" + depends on 64BIT + select ARCH_WANT_COMPAT_IPC_PARSE_VERSION + select COMPAT + select MIPS32_COMPAT + select SYSVIPC_COMPAT if SYSVIPC + help + Select this option if you want to run n32 binaries. These are + 64-bit binaries using 32-bit quantities for addressing and certain + data that would normally be 64-bit. They are used in special + cases. + + If unsure, say N. + +config BINFMT_ELF32 + bool + default y if MIPS32_O32 || MIPS32_N32 + select ELFCORE + +menu "Power management options" + +config ARCH_HIBERNATION_POSSIBLE + def_bool y + depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP + +config ARCH_SUSPEND_POSSIBLE + def_bool y + depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP + +source "kernel/power/Kconfig" + +endmenu + +config MIPS_EXTERNAL_TIMER + bool + +menu "CPU Power Management" + +if CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER +source "drivers/cpufreq/Kconfig" +endif + +source "drivers/cpuidle/Kconfig" + +endmenu + +source "drivers/firmware/Kconfig" + +source "arch/mips/kvm/Kconfig" + +source "arch/mips/vdso/Kconfig" -- cgit v1.2.3