From 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 12:05:51 +0200 Subject: Adding upstream version 5.10.209. Signed-off-by: Daniel Baumann --- arch/powerpc/platforms/8xx/Kconfig | 206 +++++++ arch/powerpc/platforms/8xx/Makefile | 12 + arch/powerpc/platforms/8xx/adder875.c | 112 ++++ arch/powerpc/platforms/8xx/cpm1.c | 779 +++++++++++++++++++++++++++ arch/powerpc/platforms/8xx/ep88xc.c | 174 ++++++ arch/powerpc/platforms/8xx/m8xx_setup.c | 234 ++++++++ arch/powerpc/platforms/8xx/machine_check.c | 34 ++ arch/powerpc/platforms/8xx/mpc86xads.h | 47 ++ arch/powerpc/platforms/8xx/mpc86xads_setup.c | 150 ++++++ arch/powerpc/platforms/8xx/mpc885ads.h | 49 ++ arch/powerpc/platforms/8xx/mpc885ads_setup.c | 224 ++++++++ arch/powerpc/platforms/8xx/mpc8xx.h | 21 + arch/powerpc/platforms/8xx/pic.c | 163 ++++++ arch/powerpc/platforms/8xx/pic.h | 19 + arch/powerpc/platforms/8xx/tqm8xx_setup.c | 152 ++++++ 15 files changed, 2376 insertions(+) create mode 100644 arch/powerpc/platforms/8xx/Kconfig create mode 100644 arch/powerpc/platforms/8xx/Makefile create mode 100644 arch/powerpc/platforms/8xx/adder875.c create mode 100644 arch/powerpc/platforms/8xx/cpm1.c create mode 100644 arch/powerpc/platforms/8xx/ep88xc.c create mode 100644 arch/powerpc/platforms/8xx/m8xx_setup.c create mode 100644 arch/powerpc/platforms/8xx/machine_check.c create mode 100644 arch/powerpc/platforms/8xx/mpc86xads.h create mode 100644 arch/powerpc/platforms/8xx/mpc86xads_setup.c create mode 100644 arch/powerpc/platforms/8xx/mpc885ads.h create mode 100644 arch/powerpc/platforms/8xx/mpc885ads_setup.c create mode 100644 arch/powerpc/platforms/8xx/mpc8xx.h create mode 100644 arch/powerpc/platforms/8xx/pic.c create mode 100644 arch/powerpc/platforms/8xx/pic.h create mode 100644 arch/powerpc/platforms/8xx/tqm8xx_setup.c (limited to 'arch/powerpc/platforms/8xx') diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig new file mode 100644 index 000000000..abb2b45b2 --- /dev/null +++ b/arch/powerpc/platforms/8xx/Kconfig @@ -0,0 +1,206 @@ +# SPDX-License-Identifier: GPL-2.0 +config CPM1 + bool + select CPM + +choice + prompt "8xx Machine Type" + depends on PPC_8xx + default MPC885ADS + +config MPC8XXFADS + bool "FADS" + +config MPC86XADS + bool "MPC86XADS" + select CPM1 + help + MPC86x Application Development System by Freescale Semiconductor. + The MPC86xADS is meant to serve as a platform for s/w and h/w + development around the MPC86X processor families. + +config MPC885ADS + bool "MPC885ADS" + select CPM1 + select OF_DYNAMIC + help + Freescale Semiconductor MPC885 Application Development System (ADS). + Also known as DUET. + The MPC885ADS is meant to serve as a platform for s/w and h/w + development around the MPC885 processor family. + +config PPC_EP88XC + bool "Embedded Planet EP88xC (a.k.a. CWH-PPC-885XN-VE)" + select CPM1 + help + This enables support for the Embedded Planet EP88xC board. + + This board is also resold by Freescale as the QUICCStart + MPC885 Evaluation System and/or the CWH-PPC-885XN-VE. + +config PPC_ADDER875 + bool "Analogue & Micro Adder 875" + select CPM1 + help + This enables support for the Analogue & Micro Adder 875 + board. + +config TQM8XX + bool "TQM8XX" + select CPM1 + help + support for the mpc8xx based boards from TQM. + +endchoice + +menu "Freescale Ethernet driver platform-specific options" + depends on (FS_ENET && MPC885ADS) + + config MPC8xx_SECOND_ETH + bool "Second Ethernet channel" + depends on MPC885ADS + default y + help + This enables support for second Ethernet on MPC885ADS and MPC86xADS boards. + The latter will use SCC1, for 885ADS you can select it below. + + choice + prompt "Second Ethernet channel" + depends on MPC8xx_SECOND_ETH + default MPC8xx_SECOND_ETH_FEC2 + + config MPC8xx_SECOND_ETH_FEC2 + bool "FEC2" + depends on MPC885ADS + help + Enable FEC2 to serve as 2-nd Ethernet channel. Note that SMC2 + (often 2-nd UART) will not work if this is enabled. + + config MPC8xx_SECOND_ETH_SCC3 + bool "SCC3" + depends on MPC885ADS + help + Enable SCC3 to serve as 2-nd Ethernet channel. Note that SMC1 + (often 1-nd UART) will not work if this is enabled. + + endchoice + +endmenu + +# +# MPC8xx Communication options +# + +menu "MPC8xx CPM Options" + depends on PPC_8xx + +# This doesn't really belong here, but it is convenient to ask +# 8xx specific questions. +comment "Generic MPC8xx Options" + +config 8xx_GPIO + bool "GPIO API Support" + select GPIOLIB + help + Saying Y here will cause the ports on an MPC8xx processor to be used + with the GPIO API. If you say N here, the kernel needs less memory. + + If in doubt, say Y here. + +config 8xx_CPU15 + bool "CPU15 Silicon Errata" + depends on !HUGETLB_PAGE + default y + help + This enables a workaround for erratum CPU15 on MPC8xx chips. + This bug can cause incorrect code execution under certain + circumstances. This workaround adds some overhead (a TLB miss + every time execution crosses a page boundary), and you may wish + to disable it if you have worked around the bug in the compiler + (by not placing conditional branches or branches to LR or CTR + in the last word of a page, with a target of the last cache + line in the next page), or if you have used some other + workaround. + + If in doubt, say Y here. + +choice + prompt "Microcode patch selection" + default NO_UCODE_PATCH + help + Help not implemented yet, coming soon. + +config NO_UCODE_PATCH + bool "None" + +config USB_SOF_UCODE_PATCH + bool "USB SOF patch" + help + Help not implemented yet, coming soon. + +config I2C_SPI_UCODE_PATCH + bool "I2C/SPI relocation patch" + help + Help not implemented yet, coming soon. + +config I2C_SPI_SMC1_UCODE_PATCH + bool "I2C/SPI/SMC1 relocation patch" + help + Help not implemented yet, coming soon. + +config SMC_UCODE_PATCH + bool "SMC relocation patch" + help + This microcode relocates SMC1 and SMC2 parameter RAMs at + offset 0x1ec0 and 0x1fc0 to allow extended parameter RAM + for SCC3 and SCC4. + +endchoice + +config UCODE_PATCH + bool + default y + depends on !NO_UCODE_PATCH + +menu "8xx advanced setup" + depends on PPC_8xx + +config PIN_TLB + bool "Pinned Kernel TLBs" + depends on ADVANCED_OPTIONS + help + On the 8xx, we have 32 instruction TLBs and 32 data TLBs. In each + table 4 TLBs can be pinned. + + It reduces the amount of usable TLBs to 28 (ie by 12%). That's the + reason why we make it selectable. + + This option does nothing, it just activate the selection of what + to pin. + +config PIN_TLB_DATA + bool "Pinned TLB for DATA" + depends on PIN_TLB + default y + help + This pins the first 32 Mbytes of memory with 8M pages. + +config PIN_TLB_IMMR + bool "Pinned TLB for IMMR" + depends on PIN_TLB + default y + help + This pins the IMMR area with a 512kbytes page. In case + CONFIG_PIN_TLB_DATA is also selected, it will reduce + CONFIG_PIN_TLB_DATA to 24 Mbytes. + +config PIN_TLB_TEXT + bool "Pinned TLB for TEXT" + depends on PIN_TLB + default y + help + This pins kernel text with 8M pages. + +endmenu + +endmenu diff --git a/arch/powerpc/platforms/8xx/Makefile b/arch/powerpc/platforms/8xx/Makefile new file mode 100644 index 000000000..27a7c6f82 --- /dev/null +++ b/arch/powerpc/platforms/8xx/Makefile @@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for the PowerPC 8xx linux kernel. +# +obj-y += m8xx_setup.o machine_check.o pic.o +obj-$(CONFIG_CPM1) += cpm1.o +obj-$(CONFIG_UCODE_PATCH) += micropatch.o +obj-$(CONFIG_MPC885ADS) += mpc885ads_setup.o +obj-$(CONFIG_MPC86XADS) += mpc86xads_setup.o +obj-$(CONFIG_PPC_EP88XC) += ep88xc.o +obj-$(CONFIG_PPC_ADDER875) += adder875.o +obj-$(CONFIG_TQM8XX) += tqm8xx_setup.o diff --git a/arch/powerpc/platforms/8xx/adder875.c b/arch/powerpc/platforms/8xx/adder875.c new file mode 100644 index 000000000..651486acb --- /dev/null +++ b/arch/powerpc/platforms/8xx/adder875.c @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* Analogue & Micro Adder MPC875 board support + * + * Author: Scott Wood + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + */ + +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "mpc8xx.h" + +struct cpm_pin { + int port, pin, flags; +}; + +static __initdata struct cpm_pin adder875_pins[] = { + /* SMC1 */ + {CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */ + {CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */ + + /* MII1 */ + {CPM_PORTA, 0, CPM_PIN_INPUT}, + {CPM_PORTA, 1, CPM_PIN_INPUT}, + {CPM_PORTA, 2, CPM_PIN_INPUT}, + {CPM_PORTA, 3, CPM_PIN_INPUT}, + {CPM_PORTA, 4, CPM_PIN_OUTPUT}, + {CPM_PORTA, 10, CPM_PIN_OUTPUT}, + {CPM_PORTA, 11, CPM_PIN_OUTPUT}, + {CPM_PORTB, 19, CPM_PIN_INPUT}, + {CPM_PORTB, 31, CPM_PIN_INPUT}, + {CPM_PORTC, 12, CPM_PIN_INPUT}, + {CPM_PORTC, 13, CPM_PIN_INPUT}, + {CPM_PORTE, 30, CPM_PIN_OUTPUT}, + {CPM_PORTE, 31, CPM_PIN_OUTPUT}, + + /* MII2 */ + {CPM_PORTE, 14, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 15, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 16, CPM_PIN_OUTPUT}, + {CPM_PORTE, 17, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 18, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 19, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 20, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 21, CPM_PIN_OUTPUT}, + {CPM_PORTE, 22, CPM_PIN_OUTPUT}, + {CPM_PORTE, 23, CPM_PIN_OUTPUT}, + {CPM_PORTE, 24, CPM_PIN_OUTPUT}, + {CPM_PORTE, 25, CPM_PIN_OUTPUT}, + {CPM_PORTE, 26, CPM_PIN_OUTPUT}, + {CPM_PORTE, 27, CPM_PIN_OUTPUT}, + {CPM_PORTE, 28, CPM_PIN_OUTPUT}, + {CPM_PORTE, 29, CPM_PIN_OUTPUT}, +}; + +static void __init init_ioports(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(adder875_pins); i++) { + const struct cpm_pin *pin = &adder875_pins[i]; + cpm1_set_pin(pin->port, pin->pin, pin->flags); + } + + cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX); + + /* Set FEC1 and FEC2 to MII mode */ + clrbits32(&mpc8xx_immr->im_cpm.cp_cptr, 0x00000180); +} + +static void __init adder875_setup(void) +{ + cpm_reset(); + init_ioports(); +} + +static int __init adder875_probe(void) +{ + return of_machine_is_compatible("analogue-and-micro,adder875"); +} + +static const struct of_device_id of_bus_ids[] __initconst = { + { .compatible = "simple-bus", }, + {}, +}; + +static int __init declare_of_platform_devices(void) +{ + of_platform_bus_probe(NULL, of_bus_ids, NULL); + return 0; +} +machine_device_initcall(adder875, declare_of_platform_devices); + +define_machine(adder875) { + .name = "Adder MPC875", + .probe = adder875_probe, + .setup_arch = adder875_setup, + .init_IRQ = mpc8xx_pics_init, + .get_irq = mpc8xx_get_irq, + .restart = mpc8xx_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/8xx/cpm1.c b/arch/powerpc/platforms/8xx/cpm1.c new file mode 100644 index 000000000..3ef5e9fd3 --- /dev/null +++ b/arch/powerpc/platforms/8xx/cpm1.c @@ -0,0 +1,779 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * General Purpose functions for the global management of the + * Communication Processor Module. + * Copyright (c) 1997 Dan error_act (dmalek@jlc.net) + * + * In addition to the individual control of the communication + * channels, there are a few functions that globally affect the + * communication processor. + * + * Buffer descriptors must be allocated from the dual ported memory + * space. The allocator for that is here. When the communication + * process is reset, we reclaim the memory available. There is + * currently no deallocator for this memory. + * The amount of space available is platform dependent. On the + * MBX, the EPPC software loads additional microcode into the + * communication processor, and uses some of the DP ram for this + * purpose. Current, the first 512 bytes and the last 256 bytes of + * memory are used. Right now I am conservative and only use the + * memory that can never be used for microcode. If there are + * applications that require more DP ram, we can expand the boundaries + * but then we have to be careful of any downloaded microcode. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#ifdef CONFIG_8xx_GPIO +#include +#endif + +#define CPM_MAP_SIZE (0x4000) + +cpm8xx_t __iomem *cpmp; /* Pointer to comm processor space */ +immap_t __iomem *mpc8xx_immr = (void __iomem *)VIRT_IMMR_BASE; +static cpic8xx_t __iomem *cpic_reg; + +static struct irq_domain *cpm_pic_host; + +static void cpm_mask_irq(struct irq_data *d) +{ + unsigned int cpm_vec = (unsigned int)irqd_to_hwirq(d); + + clrbits32(&cpic_reg->cpic_cimr, (1 << cpm_vec)); +} + +static void cpm_unmask_irq(struct irq_data *d) +{ + unsigned int cpm_vec = (unsigned int)irqd_to_hwirq(d); + + setbits32(&cpic_reg->cpic_cimr, (1 << cpm_vec)); +} + +static void cpm_end_irq(struct irq_data *d) +{ + unsigned int cpm_vec = (unsigned int)irqd_to_hwirq(d); + + out_be32(&cpic_reg->cpic_cisr, (1 << cpm_vec)); +} + +static struct irq_chip cpm_pic = { + .name = "CPM PIC", + .irq_mask = cpm_mask_irq, + .irq_unmask = cpm_unmask_irq, + .irq_eoi = cpm_end_irq, +}; + +int cpm_get_irq(void) +{ + int cpm_vec; + + /* + * Get the vector by setting the ACK bit and then reading + * the register. + */ + out_be16(&cpic_reg->cpic_civr, 1); + cpm_vec = in_be16(&cpic_reg->cpic_civr); + cpm_vec >>= 11; + + return irq_linear_revmap(cpm_pic_host, cpm_vec); +} + +static int cpm_pic_host_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + pr_debug("cpm_pic_host_map(%d, 0x%lx)\n", virq, hw); + + irq_set_status_flags(virq, IRQ_LEVEL); + irq_set_chip_and_handler(virq, &cpm_pic, handle_fasteoi_irq); + return 0; +} + +/* + * The CPM can generate the error interrupt when there is a race condition + * between generating and masking interrupts. All we have to do is ACK it + * and return. This is a no-op function so we don't need any special + * tests in the interrupt handler. + */ +static irqreturn_t cpm_error_interrupt(int irq, void *dev) +{ + return IRQ_HANDLED; +} + +static const struct irq_domain_ops cpm_pic_host_ops = { + .map = cpm_pic_host_map, +}; + +unsigned int __init cpm_pic_init(void) +{ + struct device_node *np = NULL; + struct resource res; + unsigned int sirq = 0, hwirq, eirq; + int ret; + + pr_debug("cpm_pic_init\n"); + + np = of_find_compatible_node(NULL, NULL, "fsl,cpm1-pic"); + if (np == NULL) + np = of_find_compatible_node(NULL, "cpm-pic", "CPM"); + if (np == NULL) { + printk(KERN_ERR "CPM PIC init: can not find cpm-pic node\n"); + return sirq; + } + + ret = of_address_to_resource(np, 0, &res); + if (ret) + goto end; + + cpic_reg = ioremap(res.start, resource_size(&res)); + if (cpic_reg == NULL) + goto end; + + sirq = irq_of_parse_and_map(np, 0); + if (!sirq) + goto end; + + /* Initialize the CPM interrupt controller. */ + hwirq = (unsigned int)virq_to_hw(sirq); + out_be32(&cpic_reg->cpic_cicr, + (CICR_SCD_SCC4 | CICR_SCC_SCC3 | CICR_SCB_SCC2 | CICR_SCA_SCC1) | + ((hwirq/2) << 13) | CICR_HP_MASK); + + out_be32(&cpic_reg->cpic_cimr, 0); + + cpm_pic_host = irq_domain_add_linear(np, 64, &cpm_pic_host_ops, NULL); + if (cpm_pic_host == NULL) { + printk(KERN_ERR "CPM2 PIC: failed to allocate irq host!\n"); + sirq = 0; + goto end; + } + + /* Install our own error handler. */ + np = of_find_compatible_node(NULL, NULL, "fsl,cpm1"); + if (np == NULL) + np = of_find_node_by_type(NULL, "cpm"); + if (np == NULL) { + printk(KERN_ERR "CPM PIC init: can not find cpm node\n"); + goto end; + } + + eirq = irq_of_parse_and_map(np, 0); + if (!eirq) + goto end; + + if (request_irq(eirq, cpm_error_interrupt, IRQF_NO_THREAD, "error", + NULL)) + printk(KERN_ERR "Could not allocate CPM error IRQ!"); + + setbits32(&cpic_reg->cpic_cicr, CICR_IEN); + +end: + of_node_put(np); + return sirq; +} + +void __init cpm_reset(void) +{ + sysconf8xx_t __iomem *siu_conf; + + cpmp = &mpc8xx_immr->im_cpm; + +#ifndef CONFIG_PPC_EARLY_DEBUG_CPM + /* Perform a reset. */ + out_be16(&cpmp->cp_cpcr, CPM_CR_RST | CPM_CR_FLG); + + /* Wait for it. */ + while (in_be16(&cpmp->cp_cpcr) & CPM_CR_FLG); +#endif + +#ifdef CONFIG_UCODE_PATCH + cpm_load_patch(cpmp); +#endif + + /* + * Set SDMA Bus Request priority 5. + * On 860T, this also enables FEC priority 6. I am not sure + * this is what we really want for some applications, but the + * manual recommends it. + * Bit 25, FAM can also be set to use FEC aggressive mode (860T). + */ + siu_conf = immr_map(im_siu_conf); + if ((mfspr(SPRN_IMMR) & 0xffff) == 0x0900) /* MPC885 */ + out_be32(&siu_conf->sc_sdcr, 0x40); + else + out_be32(&siu_conf->sc_sdcr, 1); + immr_unmap(siu_conf); +} + +static DEFINE_SPINLOCK(cmd_lock); + +#define MAX_CR_CMD_LOOPS 10000 + +int cpm_command(u32 command, u8 opcode) +{ + int i, ret; + unsigned long flags; + + if (command & 0xffffff0f) + return -EINVAL; + + spin_lock_irqsave(&cmd_lock, flags); + + ret = 0; + out_be16(&cpmp->cp_cpcr, command | CPM_CR_FLG | (opcode << 8)); + for (i = 0; i < MAX_CR_CMD_LOOPS; i++) + if ((in_be16(&cpmp->cp_cpcr) & CPM_CR_FLG) == 0) + goto out; + + printk(KERN_ERR "%s(): Not able to issue CPM command\n", __func__); + ret = -EIO; +out: + spin_unlock_irqrestore(&cmd_lock, flags); + return ret; +} +EXPORT_SYMBOL(cpm_command); + +/* + * Set a baud rate generator. This needs lots of work. There are + * four BRGs, any of which can be wired to any channel. + * The internal baud rate clock is the system clock divided by 16. + * This assumes the baudrate is 16x oversampled by the uart. + */ +#define BRG_INT_CLK (get_brgfreq()) +#define BRG_UART_CLK (BRG_INT_CLK/16) +#define BRG_UART_CLK_DIV16 (BRG_UART_CLK/16) + +void +cpm_setbrg(uint brg, uint rate) +{ + u32 __iomem *bp; + + /* This is good enough to get SMCs running..... */ + bp = &cpmp->cp_brgc1; + bp += brg; + /* + * The BRG has a 12-bit counter. For really slow baud rates (or + * really fast processors), we may have to further divide by 16. + */ + if (((BRG_UART_CLK / rate) - 1) < 4096) + out_be32(bp, (((BRG_UART_CLK / rate) - 1) << 1) | CPM_BRG_EN); + else + out_be32(bp, (((BRG_UART_CLK_DIV16 / rate) - 1) << 1) | + CPM_BRG_EN | CPM_BRG_DIV16); +} +EXPORT_SYMBOL(cpm_setbrg); + +struct cpm_ioport16 { + __be16 dir, par, odr_sor, dat, intr; + __be16 res[3]; +}; + +struct cpm_ioport32b { + __be32 dir, par, odr, dat; +}; + +struct cpm_ioport32e { + __be32 dir, par, sor, odr, dat; +}; + +static void __init cpm1_set_pin32(int port, int pin, int flags) +{ + struct cpm_ioport32e __iomem *iop; + pin = 1 << (31 - pin); + + if (port == CPM_PORTB) + iop = (struct cpm_ioport32e __iomem *) + &mpc8xx_immr->im_cpm.cp_pbdir; + else + iop = (struct cpm_ioport32e __iomem *) + &mpc8xx_immr->im_cpm.cp_pedir; + + if (flags & CPM_PIN_OUTPUT) + setbits32(&iop->dir, pin); + else + clrbits32(&iop->dir, pin); + + if (!(flags & CPM_PIN_GPIO)) + setbits32(&iop->par, pin); + else + clrbits32(&iop->par, pin); + + if (port == CPM_PORTB) { + if (flags & CPM_PIN_OPENDRAIN) + setbits16(&mpc8xx_immr->im_cpm.cp_pbodr, pin); + else + clrbits16(&mpc8xx_immr->im_cpm.cp_pbodr, pin); + } + + if (port == CPM_PORTE) { + if (flags & CPM_PIN_SECONDARY) + setbits32(&iop->sor, pin); + else + clrbits32(&iop->sor, pin); + + if (flags & CPM_PIN_OPENDRAIN) + setbits32(&mpc8xx_immr->im_cpm.cp_peodr, pin); + else + clrbits32(&mpc8xx_immr->im_cpm.cp_peodr, pin); + } +} + +static void __init cpm1_set_pin16(int port, int pin, int flags) +{ + struct cpm_ioport16 __iomem *iop = + (struct cpm_ioport16 __iomem *)&mpc8xx_immr->im_ioport; + + pin = 1 << (15 - pin); + + if (port != 0) + iop += port - 1; + + if (flags & CPM_PIN_OUTPUT) + setbits16(&iop->dir, pin); + else + clrbits16(&iop->dir, pin); + + if (!(flags & CPM_PIN_GPIO)) + setbits16(&iop->par, pin); + else + clrbits16(&iop->par, pin); + + if (port == CPM_PORTA) { + if (flags & CPM_PIN_OPENDRAIN) + setbits16(&iop->odr_sor, pin); + else + clrbits16(&iop->odr_sor, pin); + } + if (port == CPM_PORTC) { + if (flags & CPM_PIN_SECONDARY) + setbits16(&iop->odr_sor, pin); + else + clrbits16(&iop->odr_sor, pin); + if (flags & CPM_PIN_FALLEDGE) + setbits16(&iop->intr, pin); + else + clrbits16(&iop->intr, pin); + } +} + +void __init cpm1_set_pin(enum cpm_port port, int pin, int flags) +{ + if (port == CPM_PORTB || port == CPM_PORTE) + cpm1_set_pin32(port, pin, flags); + else + cpm1_set_pin16(port, pin, flags); +} + +int __init cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode) +{ + int shift; + int i, bits = 0; + u32 __iomem *reg; + u32 mask = 7; + + u8 clk_map[][3] = { + {CPM_CLK_SCC1, CPM_BRG1, 0}, + {CPM_CLK_SCC1, CPM_BRG2, 1}, + {CPM_CLK_SCC1, CPM_BRG3, 2}, + {CPM_CLK_SCC1, CPM_BRG4, 3}, + {CPM_CLK_SCC1, CPM_CLK1, 4}, + {CPM_CLK_SCC1, CPM_CLK2, 5}, + {CPM_CLK_SCC1, CPM_CLK3, 6}, + {CPM_CLK_SCC1, CPM_CLK4, 7}, + + {CPM_CLK_SCC2, CPM_BRG1, 0}, + {CPM_CLK_SCC2, CPM_BRG2, 1}, + {CPM_CLK_SCC2, CPM_BRG3, 2}, + {CPM_CLK_SCC2, CPM_BRG4, 3}, + {CPM_CLK_SCC2, CPM_CLK1, 4}, + {CPM_CLK_SCC2, CPM_CLK2, 5}, + {CPM_CLK_SCC2, CPM_CLK3, 6}, + {CPM_CLK_SCC2, CPM_CLK4, 7}, + + {CPM_CLK_SCC3, CPM_BRG1, 0}, + {CPM_CLK_SCC3, CPM_BRG2, 1}, + {CPM_CLK_SCC3, CPM_BRG3, 2}, + {CPM_CLK_SCC3, CPM_BRG4, 3}, + {CPM_CLK_SCC3, CPM_CLK5, 4}, + {CPM_CLK_SCC3, CPM_CLK6, 5}, + {CPM_CLK_SCC3, CPM_CLK7, 6}, + {CPM_CLK_SCC3, CPM_CLK8, 7}, + + {CPM_CLK_SCC4, CPM_BRG1, 0}, + {CPM_CLK_SCC4, CPM_BRG2, 1}, + {CPM_CLK_SCC4, CPM_BRG3, 2}, + {CPM_CLK_SCC4, CPM_BRG4, 3}, + {CPM_CLK_SCC4, CPM_CLK5, 4}, + {CPM_CLK_SCC4, CPM_CLK6, 5}, + {CPM_CLK_SCC4, CPM_CLK7, 6}, + {CPM_CLK_SCC4, CPM_CLK8, 7}, + + {CPM_CLK_SMC1, CPM_BRG1, 0}, + {CPM_CLK_SMC1, CPM_BRG2, 1}, + {CPM_CLK_SMC1, CPM_BRG3, 2}, + {CPM_CLK_SMC1, CPM_BRG4, 3}, + {CPM_CLK_SMC1, CPM_CLK1, 4}, + {CPM_CLK_SMC1, CPM_CLK2, 5}, + {CPM_CLK_SMC1, CPM_CLK3, 6}, + {CPM_CLK_SMC1, CPM_CLK4, 7}, + + {CPM_CLK_SMC2, CPM_BRG1, 0}, + {CPM_CLK_SMC2, CPM_BRG2, 1}, + {CPM_CLK_SMC2, CPM_BRG3, 2}, + {CPM_CLK_SMC2, CPM_BRG4, 3}, + {CPM_CLK_SMC2, CPM_CLK5, 4}, + {CPM_CLK_SMC2, CPM_CLK6, 5}, + {CPM_CLK_SMC2, CPM_CLK7, 6}, + {CPM_CLK_SMC2, CPM_CLK8, 7}, + }; + + switch (target) { + case CPM_CLK_SCC1: + reg = &mpc8xx_immr->im_cpm.cp_sicr; + shift = 0; + break; + + case CPM_CLK_SCC2: + reg = &mpc8xx_immr->im_cpm.cp_sicr; + shift = 8; + break; + + case CPM_CLK_SCC3: + reg = &mpc8xx_immr->im_cpm.cp_sicr; + shift = 16; + break; + + case CPM_CLK_SCC4: + reg = &mpc8xx_immr->im_cpm.cp_sicr; + shift = 24; + break; + + case CPM_CLK_SMC1: + reg = &mpc8xx_immr->im_cpm.cp_simode; + shift = 12; + break; + + case CPM_CLK_SMC2: + reg = &mpc8xx_immr->im_cpm.cp_simode; + shift = 28; + break; + + default: + printk(KERN_ERR "cpm1_clock_setup: invalid clock target\n"); + return -EINVAL; + } + + for (i = 0; i < ARRAY_SIZE(clk_map); i++) { + if (clk_map[i][0] == target && clk_map[i][1] == clock) { + bits = clk_map[i][2]; + break; + } + } + + if (i == ARRAY_SIZE(clk_map)) { + printk(KERN_ERR "cpm1_clock_setup: invalid clock combination\n"); + return -EINVAL; + } + + bits <<= shift; + mask <<= shift; + + if (reg == &mpc8xx_immr->im_cpm.cp_sicr) { + if (mode == CPM_CLK_RTX) { + bits |= bits << 3; + mask |= mask << 3; + } else if (mode == CPM_CLK_RX) { + bits <<= 3; + mask <<= 3; + } + } + + out_be32(reg, (in_be32(reg) & ~mask) | bits); + + return 0; +} + +/* + * GPIO LIB API implementation + */ +#ifdef CONFIG_8xx_GPIO + +struct cpm1_gpio16_chip { + struct of_mm_gpio_chip mm_gc; + spinlock_t lock; + + /* shadowed data register to clear/set bits safely */ + u16 cpdata; + + /* IRQ associated with Pins when relevant */ + int irq[16]; +}; + +static void cpm1_gpio16_save_regs(struct of_mm_gpio_chip *mm_gc) +{ + struct cpm1_gpio16_chip *cpm1_gc = + container_of(mm_gc, struct cpm1_gpio16_chip, mm_gc); + struct cpm_ioport16 __iomem *iop = mm_gc->regs; + + cpm1_gc->cpdata = in_be16(&iop->dat); +} + +static int cpm1_gpio16_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm_ioport16 __iomem *iop = mm_gc->regs; + u16 pin_mask; + + pin_mask = 1 << (15 - gpio); + + return !!(in_be16(&iop->dat) & pin_mask); +} + +static void __cpm1_gpio16_set(struct of_mm_gpio_chip *mm_gc, u16 pin_mask, + int value) +{ + struct cpm1_gpio16_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc); + struct cpm_ioport16 __iomem *iop = mm_gc->regs; + + if (value) + cpm1_gc->cpdata |= pin_mask; + else + cpm1_gc->cpdata &= ~pin_mask; + + out_be16(&iop->dat, cpm1_gc->cpdata); +} + +static void cpm1_gpio16_set(struct gpio_chip *gc, unsigned int gpio, int value) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm1_gpio16_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc); + unsigned long flags; + u16 pin_mask = 1 << (15 - gpio); + + spin_lock_irqsave(&cpm1_gc->lock, flags); + + __cpm1_gpio16_set(mm_gc, pin_mask, value); + + spin_unlock_irqrestore(&cpm1_gc->lock, flags); +} + +static int cpm1_gpio16_to_irq(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm1_gpio16_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc); + + return cpm1_gc->irq[gpio] ? : -ENXIO; +} + +static int cpm1_gpio16_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm1_gpio16_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc); + struct cpm_ioport16 __iomem *iop = mm_gc->regs; + unsigned long flags; + u16 pin_mask = 1 << (15 - gpio); + + spin_lock_irqsave(&cpm1_gc->lock, flags); + + setbits16(&iop->dir, pin_mask); + __cpm1_gpio16_set(mm_gc, pin_mask, val); + + spin_unlock_irqrestore(&cpm1_gc->lock, flags); + + return 0; +} + +static int cpm1_gpio16_dir_in(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm1_gpio16_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc); + struct cpm_ioport16 __iomem *iop = mm_gc->regs; + unsigned long flags; + u16 pin_mask = 1 << (15 - gpio); + + spin_lock_irqsave(&cpm1_gc->lock, flags); + + clrbits16(&iop->dir, pin_mask); + + spin_unlock_irqrestore(&cpm1_gc->lock, flags); + + return 0; +} + +int cpm1_gpiochip_add16(struct device *dev) +{ + struct device_node *np = dev->of_node; + struct cpm1_gpio16_chip *cpm1_gc; + struct of_mm_gpio_chip *mm_gc; + struct gpio_chip *gc; + u16 mask; + + cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL); + if (!cpm1_gc) + return -ENOMEM; + + spin_lock_init(&cpm1_gc->lock); + + if (!of_property_read_u16(np, "fsl,cpm1-gpio-irq-mask", &mask)) { + int i, j; + + for (i = 0, j = 0; i < 16; i++) + if (mask & (1 << (15 - i))) + cpm1_gc->irq[i] = irq_of_parse_and_map(np, j++); + } + + mm_gc = &cpm1_gc->mm_gc; + gc = &mm_gc->gc; + + mm_gc->save_regs = cpm1_gpio16_save_regs; + gc->ngpio = 16; + gc->direction_input = cpm1_gpio16_dir_in; + gc->direction_output = cpm1_gpio16_dir_out; + gc->get = cpm1_gpio16_get; + gc->set = cpm1_gpio16_set; + gc->to_irq = cpm1_gpio16_to_irq; + gc->parent = dev; + gc->owner = THIS_MODULE; + + return of_mm_gpiochip_add_data(np, mm_gc, cpm1_gc); +} + +struct cpm1_gpio32_chip { + struct of_mm_gpio_chip mm_gc; + spinlock_t lock; + + /* shadowed data register to clear/set bits safely */ + u32 cpdata; +}; + +static void cpm1_gpio32_save_regs(struct of_mm_gpio_chip *mm_gc) +{ + struct cpm1_gpio32_chip *cpm1_gc = + container_of(mm_gc, struct cpm1_gpio32_chip, mm_gc); + struct cpm_ioport32b __iomem *iop = mm_gc->regs; + + cpm1_gc->cpdata = in_be32(&iop->dat); +} + +static int cpm1_gpio32_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm_ioport32b __iomem *iop = mm_gc->regs; + u32 pin_mask; + + pin_mask = 1 << (31 - gpio); + + return !!(in_be32(&iop->dat) & pin_mask); +} + +static void __cpm1_gpio32_set(struct of_mm_gpio_chip *mm_gc, u32 pin_mask, + int value) +{ + struct cpm1_gpio32_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc); + struct cpm_ioport32b __iomem *iop = mm_gc->regs; + + if (value) + cpm1_gc->cpdata |= pin_mask; + else + cpm1_gc->cpdata &= ~pin_mask; + + out_be32(&iop->dat, cpm1_gc->cpdata); +} + +static void cpm1_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm1_gpio32_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc); + unsigned long flags; + u32 pin_mask = 1 << (31 - gpio); + + spin_lock_irqsave(&cpm1_gc->lock, flags); + + __cpm1_gpio32_set(mm_gc, pin_mask, value); + + spin_unlock_irqrestore(&cpm1_gc->lock, flags); +} + +static int cpm1_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm1_gpio32_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc); + struct cpm_ioport32b __iomem *iop = mm_gc->regs; + unsigned long flags; + u32 pin_mask = 1 << (31 - gpio); + + spin_lock_irqsave(&cpm1_gc->lock, flags); + + setbits32(&iop->dir, pin_mask); + __cpm1_gpio32_set(mm_gc, pin_mask, val); + + spin_unlock_irqrestore(&cpm1_gc->lock, flags); + + return 0; +} + +static int cpm1_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm1_gpio32_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc); + struct cpm_ioport32b __iomem *iop = mm_gc->regs; + unsigned long flags; + u32 pin_mask = 1 << (31 - gpio); + + spin_lock_irqsave(&cpm1_gc->lock, flags); + + clrbits32(&iop->dir, pin_mask); + + spin_unlock_irqrestore(&cpm1_gc->lock, flags); + + return 0; +} + +int cpm1_gpiochip_add32(struct device *dev) +{ + struct device_node *np = dev->of_node; + struct cpm1_gpio32_chip *cpm1_gc; + struct of_mm_gpio_chip *mm_gc; + struct gpio_chip *gc; + + cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL); + if (!cpm1_gc) + return -ENOMEM; + + spin_lock_init(&cpm1_gc->lock); + + mm_gc = &cpm1_gc->mm_gc; + gc = &mm_gc->gc; + + mm_gc->save_regs = cpm1_gpio32_save_regs; + gc->ngpio = 32; + gc->direction_input = cpm1_gpio32_dir_in; + gc->direction_output = cpm1_gpio32_dir_out; + gc->get = cpm1_gpio32_get; + gc->set = cpm1_gpio32_set; + gc->parent = dev; + gc->owner = THIS_MODULE; + + return of_mm_gpiochip_add_data(np, mm_gc, cpm1_gc); +} + +#endif /* CONFIG_8xx_GPIO */ diff --git a/arch/powerpc/platforms/8xx/ep88xc.c b/arch/powerpc/platforms/8xx/ep88xc.c new file mode 100644 index 000000000..ebcf34a14 --- /dev/null +++ b/arch/powerpc/platforms/8xx/ep88xc.c @@ -0,0 +1,174 @@ +/* + * Platform setup for the Embedded Planet EP88xC board + * + * Author: Scott Wood + * Copyright 2007 Freescale Semiconductor, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "mpc8xx.h" + +struct cpm_pin { + int port, pin, flags; +}; + +static struct cpm_pin ep88xc_pins[] = { + /* SMC1 */ + {1, 24, CPM_PIN_INPUT}, /* RX */ + {1, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */ + + /* SCC2 */ + {0, 12, CPM_PIN_INPUT}, /* TX */ + {0, 13, CPM_PIN_INPUT}, /* RX */ + {2, 8, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* CD */ + {2, 9, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* CTS */ + {2, 14, CPM_PIN_INPUT}, /* RTS */ + + /* MII1 */ + {0, 0, CPM_PIN_INPUT}, + {0, 1, CPM_PIN_INPUT}, + {0, 2, CPM_PIN_INPUT}, + {0, 3, CPM_PIN_INPUT}, + {0, 4, CPM_PIN_OUTPUT}, + {0, 10, CPM_PIN_OUTPUT}, + {0, 11, CPM_PIN_OUTPUT}, + {1, 19, CPM_PIN_INPUT}, + {1, 31, CPM_PIN_INPUT}, + {2, 12, CPM_PIN_INPUT}, + {2, 13, CPM_PIN_INPUT}, + {3, 8, CPM_PIN_INPUT}, + {4, 30, CPM_PIN_OUTPUT}, + {4, 31, CPM_PIN_OUTPUT}, + + /* MII2 */ + {4, 14, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {4, 15, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {4, 16, CPM_PIN_OUTPUT}, + {4, 17, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {4, 18, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {4, 19, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {4, 20, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {4, 21, CPM_PIN_OUTPUT}, + {4, 22, CPM_PIN_OUTPUT}, + {4, 23, CPM_PIN_OUTPUT}, + {4, 24, CPM_PIN_OUTPUT}, + {4, 25, CPM_PIN_OUTPUT}, + {4, 26, CPM_PIN_OUTPUT}, + {4, 27, CPM_PIN_OUTPUT}, + {4, 28, CPM_PIN_OUTPUT}, + {4, 29, CPM_PIN_OUTPUT}, + + /* USB */ + {0, 6, CPM_PIN_INPUT}, /* CLK2 */ + {0, 14, CPM_PIN_INPUT}, /* USBOE */ + {0, 15, CPM_PIN_INPUT}, /* USBRXD */ + {2, 6, CPM_PIN_OUTPUT}, /* USBTXN */ + {2, 7, CPM_PIN_OUTPUT}, /* USBTXP */ + {2, 10, CPM_PIN_INPUT}, /* USBRXN */ + {2, 11, CPM_PIN_INPUT}, /* USBRXP */ + + /* Misc */ + {1, 26, CPM_PIN_INPUT}, /* BRGO2 */ + {1, 27, CPM_PIN_INPUT}, /* BRGO1 */ +}; + +static void __init init_ioports(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(ep88xc_pins); i++) { + struct cpm_pin *pin = &ep88xc_pins[i]; + cpm1_set_pin(pin->port, pin->pin, pin->flags); + } + + cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX); + cpm1_clk_setup(CPM_CLK_SCC1, CPM_CLK2, CPM_CLK_TX); /* USB */ + cpm1_clk_setup(CPM_CLK_SCC1, CPM_CLK2, CPM_CLK_RX); + cpm1_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX); + cpm1_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX); +} + +static u8 __iomem *ep88xc_bcsr; + +#define BCSR7_SCC2_ENABLE 0x10 + +#define BCSR8_PHY1_ENABLE 0x80 +#define BCSR8_PHY1_POWER 0x40 +#define BCSR8_PHY2_ENABLE 0x20 +#define BCSR8_PHY2_POWER 0x10 + +#define BCSR9_USB_ENABLE 0x80 +#define BCSR9_USB_POWER 0x40 +#define BCSR9_USB_HOST 0x20 +#define BCSR9_USB_FULL_SPEED_TARGET 0x10 + +static void __init ep88xc_setup_arch(void) +{ + struct device_node *np; + + cpm_reset(); + init_ioports(); + + np = of_find_compatible_node(NULL, NULL, "fsl,ep88xc-bcsr"); + if (!np) { + printk(KERN_CRIT "Could not find fsl,ep88xc-bcsr node\n"); + return; + } + + ep88xc_bcsr = of_iomap(np, 0); + of_node_put(np); + + if (!ep88xc_bcsr) { + printk(KERN_CRIT "Could not remap BCSR\n"); + return; + } + + setbits8(&ep88xc_bcsr[7], BCSR7_SCC2_ENABLE); + setbits8(&ep88xc_bcsr[8], BCSR8_PHY1_ENABLE | BCSR8_PHY1_POWER | + BCSR8_PHY2_ENABLE | BCSR8_PHY2_POWER); +} + +static int __init ep88xc_probe(void) +{ + return of_machine_is_compatible("fsl,ep88xc"); +} + +static const struct of_device_id of_bus_ids[] __initconst = { + { .name = "soc", }, + { .name = "cpm", }, + { .name = "localbus", }, + {}, +}; + +static int __init declare_of_platform_devices(void) +{ + /* Publish the QE devices */ + of_platform_bus_probe(NULL, of_bus_ids, NULL); + + return 0; +} +machine_device_initcall(ep88xc, declare_of_platform_devices); + +define_machine(ep88xc) { + .name = "Embedded Planet EP88xC", + .probe = ep88xc_probe, + .setup_arch = ep88xc_setup_arch, + .init_IRQ = mpc8xx_pics_init, + .get_irq = mpc8xx_get_irq, + .restart = mpc8xx_restart, + .calibrate_decr = mpc8xx_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/8xx/m8xx_setup.c b/arch/powerpc/platforms/8xx/m8xx_setup.c new file mode 100644 index 000000000..df4d57d07 --- /dev/null +++ b/arch/powerpc/platforms/8xx/m8xx_setup.c @@ -0,0 +1,234 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 1995 Linus Torvalds + * Adapted from 'alpha' version by Gary Thomas + * Modified by Cort Dougan (cort@cs.nmt.edu) + * Modified for MBX using prep/chrp/pmac functions by Dan (dmalek@jlc.net) + * Further modified for generic 8xx by Dan. + */ + +/* + * bootup setup stuff.. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "pic.h" + +#include "mpc8xx.h" + +extern int cpm_pic_init(void); +extern int cpm_get_irq(void); + +/* A place holder for time base interrupts, if they are ever enabled. */ +static irqreturn_t timebase_interrupt(int irq, void *dev) +{ + printk ("timebase_interrupt()\n"); + + return IRQ_HANDLED; +} + +/* per-board overridable init_internal_rtc() function. */ +void __init __attribute__ ((weak)) +init_internal_rtc(void) +{ + sit8xx_t __iomem *sys_tmr = immr_map(im_sit); + + /* Disable the RTC one second and alarm interrupts. */ + clrbits16(&sys_tmr->sit_rtcsc, (RTCSC_SIE | RTCSC_ALE)); + + /* Enable the RTC */ + setbits16(&sys_tmr->sit_rtcsc, (RTCSC_RTF | RTCSC_RTE)); + immr_unmap(sys_tmr); +} + +static int __init get_freq(char *name, unsigned long *val) +{ + struct device_node *cpu; + const unsigned int *fp; + int found = 0; + + /* The cpu node should have timebase and clock frequency properties */ + cpu = of_get_cpu_node(0, NULL); + + if (cpu) { + fp = of_get_property(cpu, name, NULL); + if (fp) { + found = 1; + *val = *fp; + } + + of_node_put(cpu); + } + + return found; +} + +/* The decrementer counts at the system (internal) clock frequency divided by + * sixteen, or external oscillator divided by four. We force the processor + * to use system clock divided by sixteen. + */ +void __init mpc8xx_calibrate_decr(void) +{ + struct device_node *cpu; + cark8xx_t __iomem *clk_r1; + car8xx_t __iomem *clk_r2; + sitk8xx_t __iomem *sys_tmr1; + sit8xx_t __iomem *sys_tmr2; + int irq, virq; + + clk_r1 = immr_map(im_clkrstk); + + /* Unlock the SCCR. */ + out_be32(&clk_r1->cark_sccrk, ~KAPWR_KEY); + out_be32(&clk_r1->cark_sccrk, KAPWR_KEY); + immr_unmap(clk_r1); + + /* Force all 8xx processors to use divide by 16 processor clock. */ + clk_r2 = immr_map(im_clkrst); + setbits32(&clk_r2->car_sccr, 0x02000000); + immr_unmap(clk_r2); + + /* Processor frequency is MHz. + */ + ppc_proc_freq = 50000000; + if (!get_freq("clock-frequency", &ppc_proc_freq)) + printk(KERN_ERR "WARNING: Estimating processor frequency " + "(not found)\n"); + + ppc_tb_freq = ppc_proc_freq / 16; + printk("Decrementer Frequency = 0x%lx\n", ppc_tb_freq); + + /* Perform some more timer/timebase initialization. This used + * to be done elsewhere, but other changes caused it to get + * called more than once....that is a bad thing. + * + * First, unlock all of the registers we are going to modify. + * To protect them from corruption during power down, registers + * that are maintained by keep alive power are "locked". To + * modify these registers we have to write the key value to + * the key location associated with the register. + * Some boards power up with these unlocked, while others + * are locked. Writing anything (including the unlock code?) + * to the unlocked registers will lock them again. So, here + * we guarantee the registers are locked, then we unlock them + * for our use. + */ + sys_tmr1 = immr_map(im_sitk); + out_be32(&sys_tmr1->sitk_tbscrk, ~KAPWR_KEY); + out_be32(&sys_tmr1->sitk_rtcsck, ~KAPWR_KEY); + out_be32(&sys_tmr1->sitk_tbk, ~KAPWR_KEY); + out_be32(&sys_tmr1->sitk_tbscrk, KAPWR_KEY); + out_be32(&sys_tmr1->sitk_rtcsck, KAPWR_KEY); + out_be32(&sys_tmr1->sitk_tbk, KAPWR_KEY); + immr_unmap(sys_tmr1); + + init_internal_rtc(); + + /* Enabling the decrementer also enables the timebase interrupts + * (or from the other point of view, to get decrementer interrupts + * we have to enable the timebase). The decrementer interrupt + * is wired into the vector table, nothing to do here for that. + */ + cpu = of_get_cpu_node(0, NULL); + virq= irq_of_parse_and_map(cpu, 0); + of_node_put(cpu); + irq = virq_to_hw(virq); + + sys_tmr2 = immr_map(im_sit); + out_be16(&sys_tmr2->sit_tbscr, ((1 << (7 - (irq/2))) << 8) | + (TBSCR_TBF | TBSCR_TBE)); + immr_unmap(sys_tmr2); + + if (request_irq(virq, timebase_interrupt, IRQF_NO_THREAD, "tbint", + NULL)) + panic("Could not allocate timer IRQ!"); +} + +/* The RTC on the MPC8xx is an internal register. + * We want to protect this during power down, so we need to unlock, + * modify, and re-lock. + */ + +int mpc8xx_set_rtc_time(struct rtc_time *tm) +{ + sitk8xx_t __iomem *sys_tmr1; + sit8xx_t __iomem *sys_tmr2; + time64_t time; + + sys_tmr1 = immr_map(im_sitk); + sys_tmr2 = immr_map(im_sit); + time = rtc_tm_to_time64(tm); + + out_be32(&sys_tmr1->sitk_rtck, KAPWR_KEY); + out_be32(&sys_tmr2->sit_rtc, (u32)time); + out_be32(&sys_tmr1->sitk_rtck, ~KAPWR_KEY); + + immr_unmap(sys_tmr2); + immr_unmap(sys_tmr1); + return 0; +} + +void mpc8xx_get_rtc_time(struct rtc_time *tm) +{ + unsigned long data; + sit8xx_t __iomem *sys_tmr = immr_map(im_sit); + + /* Get time from the RTC. */ + data = in_be32(&sys_tmr->sit_rtc); + rtc_time64_to_tm(data, tm); + immr_unmap(sys_tmr); + return; +} + +void __noreturn mpc8xx_restart(char *cmd) +{ + car8xx_t __iomem *clk_r = immr_map(im_clkrst); + + + local_irq_disable(); + + setbits32(&clk_r->car_plprcr, 0x00000080); + /* Clear the ME bit in MSR to cause checkstop on machine check + */ + mtmsr(mfmsr() & ~0x1000); + + in_8(&clk_r->res[0]); + panic("Restart failed\n"); +} + +static void cpm_cascade(struct irq_desc *desc) +{ + generic_handle_irq(cpm_get_irq()); +} + +/* Initialize the internal interrupt controllers. The number of + * interrupts supported can vary with the processor type, and the + * 82xx family can have up to 64. + * External interrupts can be either edge or level triggered, and + * need to be initialized by the appropriate driver. + */ +void __init mpc8xx_pics_init(void) +{ + int irq; + + if (mpc8xx_pic_init()) { + printk(KERN_ERR "Failed interrupt 8xx controller initialization\n"); + return; + } + + irq = cpm_pic_init(); + if (irq) + irq_set_chained_handler(irq, cpm_cascade); +} diff --git a/arch/powerpc/platforms/8xx/machine_check.c b/arch/powerpc/platforms/8xx/machine_check.c new file mode 100644 index 000000000..88dedf38e --- /dev/null +++ b/arch/powerpc/platforms/8xx/machine_check.c @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + */ + +#include +#include +#include + +#include + +int machine_check_8xx(struct pt_regs *regs) +{ + unsigned long reason = regs->msr; + + pr_err("Machine check in kernel mode.\n"); + pr_err("Caused by (from SRR1=%lx): ", reason); + if (reason & 0x40000000) + pr_cont("Fetch error at address %lx\n", regs->nip); + else + pr_cont("Data access error at address %lx\n", regs->dar); + +#ifdef CONFIG_PCI + /* the qspan pci read routines can cause machine checks -- Cort + * + * yuck !!! that totally needs to go away ! There are better ways + * to deal with that than having a wart in the mcheck handler. + * -- BenH + */ + bad_page_fault(regs, regs->dar, SIGBUS); + return 1; +#else + return 0; +#endif +} diff --git a/arch/powerpc/platforms/8xx/mpc86xads.h b/arch/powerpc/platforms/8xx/mpc86xads.h new file mode 100644 index 000000000..17b1fe75e --- /dev/null +++ b/arch/powerpc/platforms/8xx/mpc86xads.h @@ -0,0 +1,47 @@ +/* + * A collection of structures, addresses, and values associated with + * the Freescale MPC86xADS board. + * Copied from the FADS stuff. + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * 2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is licensed + * "as is" without any warranty of any kind, whether express or implied. + */ + +#ifdef __KERNEL__ +#ifndef __ASM_MPC86XADS_H__ +#define __ASM_MPC86XADS_H__ + +/* Bits of interest in the BCSRs. + */ +#define BCSR1_ETHEN ((uint)0x20000000) +#define BCSR1_IRDAEN ((uint)0x10000000) +#define BCSR1_RS232EN_1 ((uint)0x01000000) +#define BCSR1_PCCEN ((uint)0x00800000) +#define BCSR1_PCCVCC0 ((uint)0x00400000) +#define BCSR1_PCCVPP0 ((uint)0x00200000) +#define BCSR1_PCCVPP1 ((uint)0x00100000) +#define BCSR1_PCCVPP_MASK (BCSR1_PCCVPP0 | BCSR1_PCCVPP1) +#define BCSR1_RS232EN_2 ((uint)0x00040000) +#define BCSR1_PCCVCC1 ((uint)0x00010000) +#define BCSR1_PCCVCC_MASK (BCSR1_PCCVCC0 | BCSR1_PCCVCC1) + +#define BCSR4_ETH10_RST ((uint)0x80000000) /* 10Base-T PHY reset*/ +#define BCSR4_USB_LO_SPD ((uint)0x04000000) +#define BCSR4_USB_VCC ((uint)0x02000000) +#define BCSR4_USB_FULL_SPD ((uint)0x00040000) +#define BCSR4_USB_EN ((uint)0x00020000) + +#define BCSR5_MII2_EN 0x40 +#define BCSR5_MII2_RST 0x20 +#define BCSR5_T1_RST 0x10 +#define BCSR5_ATM155_RST 0x08 +#define BCSR5_ATM25_RST 0x04 +#define BCSR5_MII1_EN 0x02 +#define BCSR5_MII1_RST 0x01 + +#endif /* __ASM_MPC86XADS_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/platforms/8xx/mpc86xads_setup.c b/arch/powerpc/platforms/8xx/mpc86xads_setup.c new file mode 100644 index 000000000..8d02f5ff4 --- /dev/null +++ b/arch/powerpc/platforms/8xx/mpc86xads_setup.c @@ -0,0 +1,150 @@ +/*arch/powerpc/platforms/8xx/mpc86xads_setup.c + * + * Platform setup for the Freescale mpc86xads board + * + * Vitaly Bordug + * + * Copyright 2005 MontaVista Software Inc. + * + * Heavily modified by Scott Wood + * Copyright 2007 Freescale Semiconductor, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include "mpc86xads.h" +#include "mpc8xx.h" + +struct cpm_pin { + int port, pin, flags; +}; + +static struct cpm_pin mpc866ads_pins[] = { + /* SMC1 */ + {CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */ + {CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */ + + /* SMC2 */ + {CPM_PORTB, 21, CPM_PIN_INPUT}, /* RX */ + {CPM_PORTB, 20, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */ + + /* SCC1 */ + {CPM_PORTA, 6, CPM_PIN_INPUT}, /* CLK1 */ + {CPM_PORTA, 7, CPM_PIN_INPUT}, /* CLK2 */ + {CPM_PORTA, 14, CPM_PIN_INPUT}, /* TX */ + {CPM_PORTA, 15, CPM_PIN_INPUT}, /* RX */ + {CPM_PORTB, 19, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TENA */ + {CPM_PORTC, 10, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* RENA */ + {CPM_PORTC, 11, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* CLSN */ + + /* MII */ + {CPM_PORTD, 3, CPM_PIN_OUTPUT}, + {CPM_PORTD, 4, CPM_PIN_OUTPUT}, + {CPM_PORTD, 5, CPM_PIN_OUTPUT}, + {CPM_PORTD, 6, CPM_PIN_OUTPUT}, + {CPM_PORTD, 7, CPM_PIN_OUTPUT}, + {CPM_PORTD, 8, CPM_PIN_OUTPUT}, + {CPM_PORTD, 9, CPM_PIN_OUTPUT}, + {CPM_PORTD, 10, CPM_PIN_OUTPUT}, + {CPM_PORTD, 11, CPM_PIN_OUTPUT}, + {CPM_PORTD, 12, CPM_PIN_OUTPUT}, + {CPM_PORTD, 13, CPM_PIN_OUTPUT}, + {CPM_PORTD, 14, CPM_PIN_OUTPUT}, + {CPM_PORTD, 15, CPM_PIN_OUTPUT}, + + /* I2C */ + {CPM_PORTB, 26, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN}, + {CPM_PORTB, 27, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN}, +}; + +static void __init init_ioports(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(mpc866ads_pins); i++) { + struct cpm_pin *pin = &mpc866ads_pins[i]; + cpm1_set_pin(pin->port, pin->pin, pin->flags); + } + + cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX); + cpm1_clk_setup(CPM_CLK_SMC2, CPM_BRG2, CPM_CLK_RTX); + cpm1_clk_setup(CPM_CLK_SCC1, CPM_CLK1, CPM_CLK_TX); + cpm1_clk_setup(CPM_CLK_SCC1, CPM_CLK2, CPM_CLK_RX); + + /* Set FEC1 and FEC2 to MII mode */ + clrbits32(&mpc8xx_immr->im_cpm.cp_cptr, 0x00000180); +} + +static void __init mpc86xads_setup_arch(void) +{ + struct device_node *np; + u32 __iomem *bcsr_io; + + cpm_reset(); + init_ioports(); + + np = of_find_compatible_node(NULL, NULL, "fsl,mpc866ads-bcsr"); + if (!np) { + printk(KERN_CRIT "Could not find fsl,mpc866ads-bcsr node\n"); + return; + } + + bcsr_io = of_iomap(np, 0); + of_node_put(np); + + if (bcsr_io == NULL) { + printk(KERN_CRIT "Could not remap BCSR\n"); + return; + } + + clrbits32(bcsr_io, BCSR1_RS232EN_1 | BCSR1_RS232EN_2 | BCSR1_ETHEN); + iounmap(bcsr_io); +} + +static int __init mpc86xads_probe(void) +{ + return of_machine_is_compatible("fsl,mpc866ads"); +} + +static const struct of_device_id of_bus_ids[] __initconst = { + { .name = "soc", }, + { .name = "cpm", }, + { .name = "localbus", }, + {}, +}; + +static int __init declare_of_platform_devices(void) +{ + of_platform_bus_probe(NULL, of_bus_ids, NULL); + + return 0; +} +machine_device_initcall(mpc86x_ads, declare_of_platform_devices); + +define_machine(mpc86x_ads) { + .name = "MPC86x ADS", + .probe = mpc86xads_probe, + .setup_arch = mpc86xads_setup_arch, + .init_IRQ = mpc8xx_pics_init, + .get_irq = mpc8xx_get_irq, + .restart = mpc8xx_restart, + .calibrate_decr = mpc8xx_calibrate_decr, + .set_rtc_time = mpc8xx_set_rtc_time, + .get_rtc_time = mpc8xx_get_rtc_time, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/8xx/mpc885ads.h b/arch/powerpc/platforms/8xx/mpc885ads.h new file mode 100644 index 000000000..19412f76f --- /dev/null +++ b/arch/powerpc/platforms/8xx/mpc885ads.h @@ -0,0 +1,49 @@ +/* + * A collection of structures, addresses, and values associated with + * the Freescale MPC885ADS board. + * Copied from the FADS stuff. + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * 2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is licensed + * "as is" without any warranty of any kind, whether express or implied. + */ + +#ifdef __KERNEL__ +#ifndef __ASM_MPC885ADS_H__ +#define __ASM_MPC885ADS_H__ + +#include + +/* Bits of interest in the BCSRs. + */ +#define BCSR1_ETHEN ((uint)0x20000000) +#define BCSR1_IRDAEN ((uint)0x10000000) +#define BCSR1_RS232EN_1 ((uint)0x01000000) +#define BCSR1_PCCEN ((uint)0x00800000) +#define BCSR1_PCCVCC0 ((uint)0x00400000) +#define BCSR1_PCCVPP0 ((uint)0x00200000) +#define BCSR1_PCCVPP1 ((uint)0x00100000) +#define BCSR1_PCCVPP_MASK (BCSR1_PCCVPP0 | BCSR1_PCCVPP1) +#define BCSR1_RS232EN_2 ((uint)0x00040000) +#define BCSR1_PCCVCC1 ((uint)0x00010000) +#define BCSR1_PCCVCC_MASK (BCSR1_PCCVCC0 | BCSR1_PCCVCC1) + +#define BCSR4_ETH10_RST ((uint)0x80000000) /* 10Base-T PHY reset*/ +#define BCSR4_USB_LO_SPD ((uint)0x04000000) +#define BCSR4_USB_VCC ((uint)0x02000000) +#define BCSR4_USB_FULL_SPD ((uint)0x00040000) +#define BCSR4_USB_EN ((uint)0x00020000) + +#define BCSR5_MII2_EN 0x40 +#define BCSR5_MII2_RST 0x20 +#define BCSR5_T1_RST 0x10 +#define BCSR5_ATM155_RST 0x08 +#define BCSR5_ATM25_RST 0x04 +#define BCSR5_MII1_EN 0x02 +#define BCSR5_MII1_RST 0x01 + +#endif /* __ASM_MPC885ADS_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/platforms/8xx/mpc885ads_setup.c b/arch/powerpc/platforms/8xx/mpc885ads_setup.c new file mode 100644 index 000000000..a0c83c190 --- /dev/null +++ b/arch/powerpc/platforms/8xx/mpc885ads_setup.c @@ -0,0 +1,224 @@ +/* + * Platform setup for the Freescale mpc885ads board + * + * Vitaly Bordug + * + * Copyright 2005 MontaVista Software Inc. + * + * Heavily modified by Scott Wood + * Copyright 2007 Freescale Semiconductor, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "mpc885ads.h" +#include "mpc8xx.h" + +static u32 __iomem *bcsr, *bcsr5; + +struct cpm_pin { + int port, pin, flags; +}; + +static struct cpm_pin mpc885ads_pins[] = { + /* SMC1 */ + {CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */ + {CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */ + + /* SMC2 */ +#ifndef CONFIG_MPC8xx_SECOND_ETH_FEC2 + {CPM_PORTE, 21, CPM_PIN_INPUT}, /* RX */ + {CPM_PORTE, 20, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */ +#endif + + /* SCC3 */ + {CPM_PORTA, 9, CPM_PIN_INPUT}, /* RX */ + {CPM_PORTA, 8, CPM_PIN_INPUT}, /* TX */ + {CPM_PORTC, 4, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* RENA */ + {CPM_PORTC, 5, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* CLSN */ + {CPM_PORTE, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TENA */ + {CPM_PORTE, 17, CPM_PIN_INPUT}, /* CLK5 */ + {CPM_PORTE, 16, CPM_PIN_INPUT}, /* CLK6 */ + + /* MII1 */ + {CPM_PORTA, 0, CPM_PIN_INPUT}, + {CPM_PORTA, 1, CPM_PIN_INPUT}, + {CPM_PORTA, 2, CPM_PIN_INPUT}, + {CPM_PORTA, 3, CPM_PIN_INPUT}, + {CPM_PORTA, 4, CPM_PIN_OUTPUT}, + {CPM_PORTA, 10, CPM_PIN_OUTPUT}, + {CPM_PORTA, 11, CPM_PIN_OUTPUT}, + {CPM_PORTB, 19, CPM_PIN_INPUT}, + {CPM_PORTB, 31, CPM_PIN_INPUT}, + {CPM_PORTC, 12, CPM_PIN_INPUT}, + {CPM_PORTC, 13, CPM_PIN_INPUT}, + {CPM_PORTE, 30, CPM_PIN_OUTPUT}, + {CPM_PORTE, 31, CPM_PIN_OUTPUT}, + + /* MII2 */ +#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2 + {CPM_PORTE, 14, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 15, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 16, CPM_PIN_OUTPUT}, + {CPM_PORTE, 17, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 18, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 19, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 20, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {CPM_PORTE, 21, CPM_PIN_OUTPUT}, + {CPM_PORTE, 22, CPM_PIN_OUTPUT}, + {CPM_PORTE, 23, CPM_PIN_OUTPUT}, + {CPM_PORTE, 24, CPM_PIN_OUTPUT}, + {CPM_PORTE, 25, CPM_PIN_OUTPUT}, + {CPM_PORTE, 26, CPM_PIN_OUTPUT}, + {CPM_PORTE, 27, CPM_PIN_OUTPUT}, + {CPM_PORTE, 28, CPM_PIN_OUTPUT}, + {CPM_PORTE, 29, CPM_PIN_OUTPUT}, +#endif + /* I2C */ + {CPM_PORTB, 26, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN}, + {CPM_PORTB, 27, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN}, +}; + +static void __init init_ioports(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(mpc885ads_pins); i++) { + struct cpm_pin *pin = &mpc885ads_pins[i]; + cpm1_set_pin(pin->port, pin->pin, pin->flags); + } + + cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX); + cpm1_clk_setup(CPM_CLK_SMC2, CPM_BRG2, CPM_CLK_RTX); + cpm1_clk_setup(CPM_CLK_SCC3, CPM_CLK5, CPM_CLK_TX); + cpm1_clk_setup(CPM_CLK_SCC3, CPM_CLK6, CPM_CLK_RX); + + /* Set FEC1 and FEC2 to MII mode */ + clrbits32(&mpc8xx_immr->im_cpm.cp_cptr, 0x00000180); +} + +static void __init mpc885ads_setup_arch(void) +{ + struct device_node *np; + + cpm_reset(); + init_ioports(); + + np = of_find_compatible_node(NULL, NULL, "fsl,mpc885ads-bcsr"); + if (!np) { + printk(KERN_CRIT "Could not find fsl,mpc885ads-bcsr node\n"); + return; + } + + bcsr = of_iomap(np, 0); + bcsr5 = of_iomap(np, 1); + of_node_put(np); + + if (!bcsr || !bcsr5) { + printk(KERN_CRIT "Could not remap BCSR\n"); + return; + } + + clrbits32(&bcsr[1], BCSR1_RS232EN_1); +#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2 + setbits32(&bcsr[1], BCSR1_RS232EN_2); +#else + clrbits32(&bcsr[1], BCSR1_RS232EN_2); +#endif + + clrbits32(bcsr5, BCSR5_MII1_EN); + setbits32(bcsr5, BCSR5_MII1_RST); + udelay(1000); + clrbits32(bcsr5, BCSR5_MII1_RST); + +#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2 + clrbits32(bcsr5, BCSR5_MII2_EN); + setbits32(bcsr5, BCSR5_MII2_RST); + udelay(1000); + clrbits32(bcsr5, BCSR5_MII2_RST); +#else + setbits32(bcsr5, BCSR5_MII2_EN); +#endif + +#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3 + clrbits32(&bcsr[4], BCSR4_ETH10_RST); + udelay(1000); + setbits32(&bcsr[4], BCSR4_ETH10_RST); + + setbits32(&bcsr[1], BCSR1_ETHEN); + + np = of_find_node_by_path("/soc@ff000000/cpm@9c0/serial@a80"); +#else + np = of_find_node_by_path("/soc@ff000000/cpm@9c0/ethernet@a40"); +#endif + + /* The SCC3 enet registers overlap the SMC1 registers, so + * one of the two must be removed from the device tree. + */ + + if (np) { + of_detach_node(np); + of_node_put(np); + } +} + +static int __init mpc885ads_probe(void) +{ + return of_machine_is_compatible("fsl,mpc885ads"); +} + +static const struct of_device_id of_bus_ids[] __initconst = { + { .name = "soc", }, + { .name = "cpm", }, + { .name = "localbus", }, + {}, +}; + +static int __init declare_of_platform_devices(void) +{ + /* Publish the QE devices */ + of_platform_bus_probe(NULL, of_bus_ids, NULL); + + return 0; +} +machine_device_initcall(mpc885_ads, declare_of_platform_devices); + +define_machine(mpc885_ads) { + .name = "Freescale MPC885 ADS", + .probe = mpc885ads_probe, + .setup_arch = mpc885ads_setup_arch, + .init_IRQ = mpc8xx_pics_init, + .get_irq = mpc8xx_get_irq, + .restart = mpc8xx_restart, + .calibrate_decr = mpc8xx_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/8xx/mpc8xx.h b/arch/powerpc/platforms/8xx/mpc8xx.h new file mode 100644 index 000000000..31cc2ecac --- /dev/null +++ b/arch/powerpc/platforms/8xx/mpc8xx.h @@ -0,0 +1,21 @@ +/* + * Prototypes, etc. for the Freescale MPC8xx embedded cpu chips + * May need to be cleaned as the port goes on ... + * + * Copyright (C) 2008 Jochen Friedrich + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ +#ifndef __MPC8xx_H +#define __MPC8xx_H + +extern void __noreturn mpc8xx_restart(char *cmd); +extern void mpc8xx_calibrate_decr(void); +extern int mpc8xx_set_rtc_time(struct rtc_time *tm); +extern void mpc8xx_get_rtc_time(struct rtc_time *tm); +extern void mpc8xx_pics_init(void); +extern unsigned int mpc8xx_get_irq(void); + +#endif /* __MPC8xx_H */ diff --git a/arch/powerpc/platforms/8xx/pic.c b/arch/powerpc/platforms/8xx/pic.c new file mode 100644 index 000000000..04a6abf14 --- /dev/null +++ b/arch/powerpc/platforms/8xx/pic.c @@ -0,0 +1,163 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "pic.h" + + +#define PIC_VEC_SPURRIOUS 15 + +extern int cpm_get_irq(struct pt_regs *regs); + +static struct irq_domain *mpc8xx_pic_host; +static unsigned long mpc8xx_cached_irq_mask; +static sysconf8xx_t __iomem *siu_reg; + +static inline unsigned long mpc8xx_irqd_to_bit(struct irq_data *d) +{ + return 0x80000000 >> irqd_to_hwirq(d); +} + +static void mpc8xx_unmask_irq(struct irq_data *d) +{ + mpc8xx_cached_irq_mask |= mpc8xx_irqd_to_bit(d); + out_be32(&siu_reg->sc_simask, mpc8xx_cached_irq_mask); +} + +static void mpc8xx_mask_irq(struct irq_data *d) +{ + mpc8xx_cached_irq_mask &= ~mpc8xx_irqd_to_bit(d); + out_be32(&siu_reg->sc_simask, mpc8xx_cached_irq_mask); +} + +static void mpc8xx_ack(struct irq_data *d) +{ + out_be32(&siu_reg->sc_sipend, mpc8xx_irqd_to_bit(d)); +} + +static void mpc8xx_end_irq(struct irq_data *d) +{ + mpc8xx_cached_irq_mask |= mpc8xx_irqd_to_bit(d); + out_be32(&siu_reg->sc_simask, mpc8xx_cached_irq_mask); +} + +static int mpc8xx_set_irq_type(struct irq_data *d, unsigned int flow_type) +{ + /* only external IRQ senses are programmable */ + if ((flow_type & IRQ_TYPE_EDGE_FALLING) && !(irqd_to_hwirq(d) & 1)) { + unsigned int siel = in_be32(&siu_reg->sc_siel); + siel |= mpc8xx_irqd_to_bit(d); + out_be32(&siu_reg->sc_siel, siel); + irq_set_handler_locked(d, handle_edge_irq); + } + return 0; +} + +static struct irq_chip mpc8xx_pic = { + .name = "8XX SIU", + .irq_unmask = mpc8xx_unmask_irq, + .irq_mask = mpc8xx_mask_irq, + .irq_ack = mpc8xx_ack, + .irq_eoi = mpc8xx_end_irq, + .irq_set_type = mpc8xx_set_irq_type, +}; + +unsigned int mpc8xx_get_irq(void) +{ + int irq; + + /* For MPC8xx, read the SIVEC register and shift the bits down + * to get the irq number. + */ + irq = in_be32(&siu_reg->sc_sivec) >> 26; + + if (irq == PIC_VEC_SPURRIOUS) + return 0; + + return irq_linear_revmap(mpc8xx_pic_host, irq); + +} + +static int mpc8xx_pic_host_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + pr_debug("mpc8xx_pic_host_map(%d, 0x%lx)\n", virq, hw); + + /* Set default irq handle */ + irq_set_chip_and_handler(virq, &mpc8xx_pic, handle_level_irq); + return 0; +} + + +static int mpc8xx_pic_host_xlate(struct irq_domain *h, struct device_node *ct, + const u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, unsigned int *out_flags) +{ + static unsigned char map_pic_senses[4] = { + IRQ_TYPE_EDGE_RISING, + IRQ_TYPE_LEVEL_LOW, + IRQ_TYPE_LEVEL_HIGH, + IRQ_TYPE_EDGE_FALLING, + }; + + if (intspec[0] > 0x1f) + return 0; + + *out_hwirq = intspec[0]; + if (intsize > 1 && intspec[1] < 4) + *out_flags = map_pic_senses[intspec[1]]; + else + *out_flags = IRQ_TYPE_NONE; + + return 0; +} + + +static const struct irq_domain_ops mpc8xx_pic_host_ops = { + .map = mpc8xx_pic_host_map, + .xlate = mpc8xx_pic_host_xlate, +}; + +int __init mpc8xx_pic_init(void) +{ + struct resource res; + struct device_node *np; + int ret; + + np = of_find_compatible_node(NULL, NULL, "fsl,pq1-pic"); + if (np == NULL) + np = of_find_node_by_type(NULL, "mpc8xx-pic"); + if (np == NULL) { + printk(KERN_ERR "Could not find fsl,pq1-pic node\n"); + return -ENOMEM; + } + + ret = of_address_to_resource(np, 0, &res); + if (ret) + goto out; + + siu_reg = ioremap(res.start, resource_size(&res)); + if (siu_reg == NULL) { + ret = -EINVAL; + goto out; + } + + mpc8xx_pic_host = irq_domain_add_linear(np, 64, &mpc8xx_pic_host_ops, NULL); + if (mpc8xx_pic_host == NULL) { + printk(KERN_ERR "MPC8xx PIC: failed to allocate irq host!\n"); + ret = -ENOMEM; + goto out; + } + + ret = 0; +out: + of_node_put(np); + return ret; +} diff --git a/arch/powerpc/platforms/8xx/pic.h b/arch/powerpc/platforms/8xx/pic.h new file mode 100644 index 000000000..9fe00eebd --- /dev/null +++ b/arch/powerpc/platforms/8xx/pic.h @@ -0,0 +1,19 @@ +#ifndef _PPC_KERNEL_MPC8xx_H +#define _PPC_KERNEL_MPC8xx_H + +#include +#include + +int mpc8xx_pic_init(void); +unsigned int mpc8xx_get_irq(void); + +/* + * Some internal interrupt registers use an 8-bit mask for the interrupt + * level instead of a number. + */ +static inline uint mk_int_int_mask(uint mask) +{ + return (1 << (7 - (mask/2))); +} + +#endif /* _PPC_KERNEL_PPC8xx_H */ diff --git a/arch/powerpc/platforms/8xx/tqm8xx_setup.c b/arch/powerpc/platforms/8xx/tqm8xx_setup.c new file mode 100644 index 000000000..4cea8b1af --- /dev/null +++ b/arch/powerpc/platforms/8xx/tqm8xx_setup.c @@ -0,0 +1,152 @@ +/* + * Platform setup for the MPC8xx based boards from TQM. + * + * Heiko Schocher + * Copyright 2010 DENX Software Engineering GmbH + * + * based on: + * Vitaly Bordug + * + * Copyright 2005 MontaVista Software Inc. + * + * Heavily modified by Scott Wood + * Copyright 2007 Freescale Semiconductor, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "mpc8xx.h" + +struct cpm_pin { + int port, pin, flags; +}; + +static struct cpm_pin tqm8xx_pins[] __initdata = { + /* SMC1 */ + {CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */ + {CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */ + + /* SCC1 */ + {CPM_PORTA, 5, CPM_PIN_INPUT}, /* CLK1 */ + {CPM_PORTA, 7, CPM_PIN_INPUT}, /* CLK2 */ + {CPM_PORTA, 14, CPM_PIN_INPUT}, /* TX */ + {CPM_PORTA, 15, CPM_PIN_INPUT}, /* RX */ + {CPM_PORTC, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TENA */ + {CPM_PORTC, 10, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, + {CPM_PORTC, 11, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, +}; + +static struct cpm_pin tqm8xx_fec_pins[] __initdata = { + /* MII */ + {CPM_PORTD, 3, CPM_PIN_OUTPUT}, + {CPM_PORTD, 4, CPM_PIN_OUTPUT}, + {CPM_PORTD, 5, CPM_PIN_OUTPUT}, + {CPM_PORTD, 6, CPM_PIN_OUTPUT}, + {CPM_PORTD, 7, CPM_PIN_OUTPUT}, + {CPM_PORTD, 8, CPM_PIN_OUTPUT}, + {CPM_PORTD, 9, CPM_PIN_OUTPUT}, + {CPM_PORTD, 10, CPM_PIN_OUTPUT}, + {CPM_PORTD, 11, CPM_PIN_OUTPUT}, + {CPM_PORTD, 12, CPM_PIN_OUTPUT}, + {CPM_PORTD, 13, CPM_PIN_OUTPUT}, + {CPM_PORTD, 14, CPM_PIN_OUTPUT}, + {CPM_PORTD, 15, CPM_PIN_OUTPUT}, +}; + +static void __init init_pins(int n, struct cpm_pin *pin) +{ + int i; + + for (i = 0; i < n; i++) { + cpm1_set_pin(pin->port, pin->pin, pin->flags); + pin++; + } +} + +static void __init init_ioports(void) +{ + struct device_node *dnode; + struct property *prop; + int len; + + init_pins(ARRAY_SIZE(tqm8xx_pins), &tqm8xx_pins[0]); + + cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX); + + dnode = of_find_node_by_name(NULL, "aliases"); + if (dnode == NULL) + return; + prop = of_find_property(dnode, "ethernet1", &len); + if (prop == NULL) + return; + + /* init FEC pins */ + init_pins(ARRAY_SIZE(tqm8xx_fec_pins), &tqm8xx_fec_pins[0]); +} + +static void __init tqm8xx_setup_arch(void) +{ + cpm_reset(); + init_ioports(); +} + +static int __init tqm8xx_probe(void) +{ + return of_machine_is_compatible("tqc,tqm8xx"); +} + +static const struct of_device_id of_bus_ids[] __initconst = { + { .name = "soc", }, + { .name = "cpm", }, + { .name = "localbus", }, + { .compatible = "simple-bus" }, + {}, +}; + +static int __init declare_of_platform_devices(void) +{ + of_platform_bus_probe(NULL, of_bus_ids, NULL); + + return 0; +} +machine_device_initcall(tqm8xx, declare_of_platform_devices); + +define_machine(tqm8xx) { + .name = "TQM8xx", + .probe = tqm8xx_probe, + .setup_arch = tqm8xx_setup_arch, + .init_IRQ = mpc8xx_pics_init, + .get_irq = mpc8xx_get_irq, + .restart = mpc8xx_restart, + .calibrate_decr = mpc8xx_calibrate_decr, + .set_rtc_time = mpc8xx_set_rtc_time, + .get_rtc_time = mpc8xx_get_rtc_time, + .progress = udbg_progress, +}; -- cgit v1.2.3