From 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 12:05:51 +0200 Subject: Adding upstream version 5.10.209. Signed-off-by: Daniel Baumann --- drivers/hwmon/emc2103.c | 666 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 666 insertions(+) create mode 100644 drivers/hwmon/emc2103.c (limited to 'drivers/hwmon/emc2103.c') diff --git a/drivers/hwmon/emc2103.c b/drivers/hwmon/emc2103.c new file mode 100644 index 000000000..e4c95ca9e --- /dev/null +++ b/drivers/hwmon/emc2103.c @@ -0,0 +1,666 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * emc2103.c - Support for SMSC EMC2103 + * Copyright (c) 2010 SMSC + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Addresses scanned */ +static const unsigned short normal_i2c[] = { 0x2E, I2C_CLIENT_END }; + +static const u8 REG_TEMP[4] = { 0x00, 0x02, 0x04, 0x06 }; +static const u8 REG_TEMP_MIN[4] = { 0x3c, 0x38, 0x39, 0x3a }; +static const u8 REG_TEMP_MAX[4] = { 0x34, 0x30, 0x31, 0x32 }; + +#define REG_CONF1 0x20 +#define REG_TEMP_MAX_ALARM 0x24 +#define REG_TEMP_MIN_ALARM 0x25 +#define REG_FAN_CONF1 0x42 +#define REG_FAN_TARGET_LO 0x4c +#define REG_FAN_TARGET_HI 0x4d +#define REG_FAN_TACH_HI 0x4e +#define REG_FAN_TACH_LO 0x4f +#define REG_PRODUCT_ID 0xfd +#define REG_MFG_ID 0xfe + +/* equation 4 from datasheet: rpm = (3932160 * multipler) / count */ +#define FAN_RPM_FACTOR 3932160 + +/* + * 2103-2 and 2103-4's 3rd temperature sensor can be connected to two diodes + * in anti-parallel mode, and in this configuration both can be read + * independently (so we have 4 temperature inputs). The device can't + * detect if it's connected in this mode, so we have to manually enable + * it. Default is to leave the device in the state it's already in (-1). + * This parameter allows APD mode to be optionally forced on or off + */ +static int apd = -1; +module_param(apd, bint, 0); +MODULE_PARM_DESC(apd, "Set to zero to disable anti-parallel diode mode"); + +struct temperature { + s8 degrees; + u8 fraction; /* 0-7 multiples of 0.125 */ +}; + +struct emc2103_data { + struct i2c_client *client; + const struct attribute_group *groups[4]; + struct mutex update_lock; + bool valid; /* registers are valid */ + bool fan_rpm_control; + int temp_count; /* num of temp sensors */ + unsigned long last_updated; /* in jiffies */ + struct temperature temp[4]; /* internal + 3 external */ + s8 temp_min[4]; /* no fractional part */ + s8 temp_max[4]; /* no fractional part */ + u8 temp_min_alarm; + u8 temp_max_alarm; + u8 fan_multiplier; + u16 fan_tach; + u16 fan_target; +}; + +static int read_u8_from_i2c(struct i2c_client *client, u8 i2c_reg, u8 *output) +{ + int status = i2c_smbus_read_byte_data(client, i2c_reg); + if (status < 0) { + dev_warn(&client->dev, "reg 0x%02x, err %d\n", + i2c_reg, status); + } else { + *output = status; + } + return status; +} + +static void read_temp_from_i2c(struct i2c_client *client, u8 i2c_reg, + struct temperature *temp) +{ + u8 degrees, fractional; + + if (read_u8_from_i2c(client, i2c_reg, °rees) < 0) + return; + + if (read_u8_from_i2c(client, i2c_reg + 1, &fractional) < 0) + return; + + temp->degrees = degrees; + temp->fraction = (fractional & 0xe0) >> 5; +} + +static void read_fan_from_i2c(struct i2c_client *client, u16 *output, + u8 hi_addr, u8 lo_addr) +{ + u8 high_byte, lo_byte; + + if (read_u8_from_i2c(client, hi_addr, &high_byte) < 0) + return; + + if (read_u8_from_i2c(client, lo_addr, &lo_byte) < 0) + return; + + *output = ((u16)high_byte << 5) | (lo_byte >> 3); +} + +static void write_fan_target_to_i2c(struct i2c_client *client, u16 new_target) +{ + u8 high_byte = (new_target & 0x1fe0) >> 5; + u8 low_byte = (new_target & 0x001f) << 3; + i2c_smbus_write_byte_data(client, REG_FAN_TARGET_LO, low_byte); + i2c_smbus_write_byte_data(client, REG_FAN_TARGET_HI, high_byte); +} + +static void read_fan_config_from_i2c(struct i2c_client *client) + +{ + struct emc2103_data *data = i2c_get_clientdata(client); + u8 conf1; + + if (read_u8_from_i2c(client, REG_FAN_CONF1, &conf1) < 0) + return; + + data->fan_multiplier = 1 << ((conf1 & 0x60) >> 5); + data->fan_rpm_control = (conf1 & 0x80) != 0; +} + +static struct emc2103_data *emc2103_update_device(struct device *dev) +{ + struct emc2103_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + int i; + + for (i = 0; i < data->temp_count; i++) { + read_temp_from_i2c(client, REG_TEMP[i], &data->temp[i]); + read_u8_from_i2c(client, REG_TEMP_MIN[i], + &data->temp_min[i]); + read_u8_from_i2c(client, REG_TEMP_MAX[i], + &data->temp_max[i]); + } + + read_u8_from_i2c(client, REG_TEMP_MIN_ALARM, + &data->temp_min_alarm); + read_u8_from_i2c(client, REG_TEMP_MAX_ALARM, + &data->temp_max_alarm); + + read_fan_from_i2c(client, &data->fan_tach, + REG_FAN_TACH_HI, REG_FAN_TACH_LO); + read_fan_from_i2c(client, &data->fan_target, + REG_FAN_TARGET_HI, REG_FAN_TARGET_LO); + read_fan_config_from_i2c(client); + + data->last_updated = jiffies; + data->valid = true; + } + + mutex_unlock(&data->update_lock); + + return data; +} + +static ssize_t +temp_show(struct device *dev, struct device_attribute *da, char *buf) +{ + int nr = to_sensor_dev_attr(da)->index; + struct emc2103_data *data = emc2103_update_device(dev); + int millidegrees = data->temp[nr].degrees * 1000 + + data->temp[nr].fraction * 125; + return sprintf(buf, "%d\n", millidegrees); +} + +static ssize_t +temp_min_show(struct device *dev, struct device_attribute *da, char *buf) +{ + int nr = to_sensor_dev_attr(da)->index; + struct emc2103_data *data = emc2103_update_device(dev); + int millidegrees = data->temp_min[nr] * 1000; + return sprintf(buf, "%d\n", millidegrees); +} + +static ssize_t +temp_max_show(struct device *dev, struct device_attribute *da, char *buf) +{ + int nr = to_sensor_dev_attr(da)->index; + struct emc2103_data *data = emc2103_update_device(dev); + int millidegrees = data->temp_max[nr] * 1000; + return sprintf(buf, "%d\n", millidegrees); +} + +static ssize_t +temp_fault_show(struct device *dev, struct device_attribute *da, char *buf) +{ + int nr = to_sensor_dev_attr(da)->index; + struct emc2103_data *data = emc2103_update_device(dev); + bool fault = (data->temp[nr].degrees == -128); + return sprintf(buf, "%d\n", fault ? 1 : 0); +} + +static ssize_t +temp_min_alarm_show(struct device *dev, struct device_attribute *da, + char *buf) +{ + int nr = to_sensor_dev_attr(da)->index; + struct emc2103_data *data = emc2103_update_device(dev); + bool alarm = data->temp_min_alarm & (1 << nr); + return sprintf(buf, "%d\n", alarm ? 1 : 0); +} + +static ssize_t +temp_max_alarm_show(struct device *dev, struct device_attribute *da, + char *buf) +{ + int nr = to_sensor_dev_attr(da)->index; + struct emc2103_data *data = emc2103_update_device(dev); + bool alarm = data->temp_max_alarm & (1 << nr); + return sprintf(buf, "%d\n", alarm ? 1 : 0); +} + +static ssize_t temp_min_store(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(da)->index; + struct emc2103_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + long val; + + int result = kstrtol(buf, 10, &val); + if (result < 0) + return result; + + val = DIV_ROUND_CLOSEST(clamp_val(val, -63000, 127000), 1000); + + mutex_lock(&data->update_lock); + data->temp_min[nr] = val; + i2c_smbus_write_byte_data(client, REG_TEMP_MIN[nr], val); + mutex_unlock(&data->update_lock); + + return count; +} + +static ssize_t temp_max_store(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(da)->index; + struct emc2103_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + long val; + + int result = kstrtol(buf, 10, &val); + if (result < 0) + return result; + + val = DIV_ROUND_CLOSEST(clamp_val(val, -63000, 127000), 1000); + + mutex_lock(&data->update_lock); + data->temp_max[nr] = val; + i2c_smbus_write_byte_data(client, REG_TEMP_MAX[nr], val); + mutex_unlock(&data->update_lock); + + return count; +} + +static ssize_t +fan1_input_show(struct device *dev, struct device_attribute *da, char *buf) +{ + struct emc2103_data *data = emc2103_update_device(dev); + int rpm = 0; + if (data->fan_tach != 0) + rpm = (FAN_RPM_FACTOR * data->fan_multiplier) / data->fan_tach; + return sprintf(buf, "%d\n", rpm); +} + +static ssize_t +fan1_div_show(struct device *dev, struct device_attribute *da, char *buf) +{ + struct emc2103_data *data = emc2103_update_device(dev); + int fan_div = 8 / data->fan_multiplier; + return sprintf(buf, "%d\n", fan_div); +} + +/* + * Note: we also update the fan target here, because its value is + * determined in part by the fan clock divider. This follows the principle + * of least surprise; the user doesn't expect the fan target to change just + * because the divider changed. + */ +static ssize_t fan1_div_store(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct emc2103_data *data = emc2103_update_device(dev); + struct i2c_client *client = data->client; + int new_range_bits, old_div = 8 / data->fan_multiplier; + long new_div; + + int status = kstrtol(buf, 10, &new_div); + if (status < 0) + return status; + + if (new_div == old_div) /* No change */ + return count; + + switch (new_div) { + case 1: + new_range_bits = 3; + break; + case 2: + new_range_bits = 2; + break; + case 4: + new_range_bits = 1; + break; + case 8: + new_range_bits = 0; + break; + default: + return -EINVAL; + } + + mutex_lock(&data->update_lock); + + status = i2c_smbus_read_byte_data(client, REG_FAN_CONF1); + if (status < 0) { + dev_dbg(&client->dev, "reg 0x%02x, err %d\n", + REG_FAN_CONF1, status); + mutex_unlock(&data->update_lock); + return status; + } + status &= 0x9F; + status |= (new_range_bits << 5); + i2c_smbus_write_byte_data(client, REG_FAN_CONF1, status); + + data->fan_multiplier = 8 / new_div; + + /* update fan target if high byte is not disabled */ + if ((data->fan_target & 0x1fe0) != 0x1fe0) { + u16 new_target = (data->fan_target * old_div) / new_div; + data->fan_target = min(new_target, (u16)0x1fff); + write_fan_target_to_i2c(client, data->fan_target); + } + + /* invalidate data to force re-read from hardware */ + data->valid = false; + + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t +fan1_target_show(struct device *dev, struct device_attribute *da, char *buf) +{ + struct emc2103_data *data = emc2103_update_device(dev); + int rpm = 0; + + /* high byte of 0xff indicates disabled so return 0 */ + if ((data->fan_target != 0) && ((data->fan_target & 0x1fe0) != 0x1fe0)) + rpm = (FAN_RPM_FACTOR * data->fan_multiplier) + / data->fan_target; + + return sprintf(buf, "%d\n", rpm); +} + +static ssize_t fan1_target_store(struct device *dev, + struct device_attribute *da, const char *buf, + size_t count) +{ + struct emc2103_data *data = emc2103_update_device(dev); + struct i2c_client *client = data->client; + unsigned long rpm_target; + + int result = kstrtoul(buf, 10, &rpm_target); + if (result < 0) + return result; + + /* Datasheet states 16384 as maximum RPM target (table 3.2) */ + rpm_target = clamp_val(rpm_target, 0, 16384); + + mutex_lock(&data->update_lock); + + if (rpm_target == 0) + data->fan_target = 0x1fff; + else + data->fan_target = clamp_val( + (FAN_RPM_FACTOR * data->fan_multiplier) / rpm_target, + 0, 0x1fff); + + write_fan_target_to_i2c(client, data->fan_target); + + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t +fan1_fault_show(struct device *dev, struct device_attribute *da, char *buf) +{ + struct emc2103_data *data = emc2103_update_device(dev); + bool fault = ((data->fan_tach & 0x1fe0) == 0x1fe0); + return sprintf(buf, "%d\n", fault ? 1 : 0); +} + +static ssize_t +pwm1_enable_show(struct device *dev, struct device_attribute *da, char *buf) +{ + struct emc2103_data *data = emc2103_update_device(dev); + return sprintf(buf, "%d\n", data->fan_rpm_control ? 3 : 0); +} + +static ssize_t pwm1_enable_store(struct device *dev, + struct device_attribute *da, const char *buf, + size_t count) +{ + struct emc2103_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + long new_value; + u8 conf_reg; + + int result = kstrtol(buf, 10, &new_value); + if (result < 0) + return result; + + mutex_lock(&data->update_lock); + switch (new_value) { + case 0: + data->fan_rpm_control = false; + break; + case 3: + data->fan_rpm_control = true; + break; + default: + count = -EINVAL; + goto err; + } + + result = read_u8_from_i2c(client, REG_FAN_CONF1, &conf_reg); + if (result < 0) { + count = result; + goto err; + } + + if (data->fan_rpm_control) + conf_reg |= 0x80; + else + conf_reg &= ~0x80; + + i2c_smbus_write_byte_data(client, REG_FAN_CONF1, conf_reg); +err: + mutex_unlock(&data->update_lock); + return count; +} + +static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, 0); +static SENSOR_DEVICE_ATTR_RW(temp1_min, temp_min, 0); +static SENSOR_DEVICE_ATTR_RW(temp1_max, temp_max, 0); +static SENSOR_DEVICE_ATTR_RO(temp1_fault, temp_fault, 0); +static SENSOR_DEVICE_ATTR_RO(temp1_min_alarm, temp_min_alarm, 0); +static SENSOR_DEVICE_ATTR_RO(temp1_max_alarm, temp_max_alarm, 0); + +static SENSOR_DEVICE_ATTR_RO(temp2_input, temp, 1); +static SENSOR_DEVICE_ATTR_RW(temp2_min, temp_min, 1); +static SENSOR_DEVICE_ATTR_RW(temp2_max, temp_max, 1); +static SENSOR_DEVICE_ATTR_RO(temp2_fault, temp_fault, 1); +static SENSOR_DEVICE_ATTR_RO(temp2_min_alarm, temp_min_alarm, 1); +static SENSOR_DEVICE_ATTR_RO(temp2_max_alarm, temp_max_alarm, 1); + +static SENSOR_DEVICE_ATTR_RO(temp3_input, temp, 2); +static SENSOR_DEVICE_ATTR_RW(temp3_min, temp_min, 2); +static SENSOR_DEVICE_ATTR_RW(temp3_max, temp_max, 2); +static SENSOR_DEVICE_ATTR_RO(temp3_fault, temp_fault, 2); +static SENSOR_DEVICE_ATTR_RO(temp3_min_alarm, temp_min_alarm, 2); +static SENSOR_DEVICE_ATTR_RO(temp3_max_alarm, temp_max_alarm, 2); + +static SENSOR_DEVICE_ATTR_RO(temp4_input, temp, 3); +static SENSOR_DEVICE_ATTR_RW(temp4_min, temp_min, 3); +static SENSOR_DEVICE_ATTR_RW(temp4_max, temp_max, 3); +static SENSOR_DEVICE_ATTR_RO(temp4_fault, temp_fault, 3); +static SENSOR_DEVICE_ATTR_RO(temp4_min_alarm, temp_min_alarm, 3); +static SENSOR_DEVICE_ATTR_RO(temp4_max_alarm, temp_max_alarm, 3); + +static DEVICE_ATTR_RO(fan1_input); +static DEVICE_ATTR_RW(fan1_div); +static DEVICE_ATTR_RW(fan1_target); +static DEVICE_ATTR_RO(fan1_fault); + +static DEVICE_ATTR_RW(pwm1_enable); + +/* sensors present on all models */ +static struct attribute *emc2103_attributes[] = { + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_min.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp1_fault.dev_attr.attr, + &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp2_min.dev_attr.attr, + &sensor_dev_attr_temp2_max.dev_attr.attr, + &sensor_dev_attr_temp2_fault.dev_attr.attr, + &sensor_dev_attr_temp2_min_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, + &dev_attr_fan1_input.attr, + &dev_attr_fan1_div.attr, + &dev_attr_fan1_target.attr, + &dev_attr_fan1_fault.attr, + &dev_attr_pwm1_enable.attr, + NULL +}; + +/* extra temperature sensors only present on 2103-2 and 2103-4 */ +static struct attribute *emc2103_attributes_temp3[] = { + &sensor_dev_attr_temp3_input.dev_attr.attr, + &sensor_dev_attr_temp3_min.dev_attr.attr, + &sensor_dev_attr_temp3_max.dev_attr.attr, + &sensor_dev_attr_temp3_fault.dev_attr.attr, + &sensor_dev_attr_temp3_min_alarm.dev_attr.attr, + &sensor_dev_attr_temp3_max_alarm.dev_attr.attr, + NULL +}; + +/* extra temperature sensors only present on 2103-2 and 2103-4 in APD mode */ +static struct attribute *emc2103_attributes_temp4[] = { + &sensor_dev_attr_temp4_input.dev_attr.attr, + &sensor_dev_attr_temp4_min.dev_attr.attr, + &sensor_dev_attr_temp4_max.dev_attr.attr, + &sensor_dev_attr_temp4_fault.dev_attr.attr, + &sensor_dev_attr_temp4_min_alarm.dev_attr.attr, + &sensor_dev_attr_temp4_max_alarm.dev_attr.attr, + NULL +}; + +static const struct attribute_group emc2103_group = { + .attrs = emc2103_attributes, +}; + +static const struct attribute_group emc2103_temp3_group = { + .attrs = emc2103_attributes_temp3, +}; + +static const struct attribute_group emc2103_temp4_group = { + .attrs = emc2103_attributes_temp4, +}; + +static int +emc2103_probe(struct i2c_client *client) +{ + struct emc2103_data *data; + struct device *hwmon_dev; + int status, idx = 0; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + data = devm_kzalloc(&client->dev, sizeof(struct emc2103_data), + GFP_KERNEL); + if (!data) + return -ENOMEM; + + i2c_set_clientdata(client, data); + data->client = client; + mutex_init(&data->update_lock); + + /* 2103-2 and 2103-4 have 3 external diodes, 2103-1 has 1 */ + status = i2c_smbus_read_byte_data(client, REG_PRODUCT_ID); + if (status == 0x24) { + /* 2103-1 only has 1 external diode */ + data->temp_count = 2; + } else { + /* 2103-2 and 2103-4 have 3 or 4 external diodes */ + status = i2c_smbus_read_byte_data(client, REG_CONF1); + if (status < 0) { + dev_dbg(&client->dev, "reg 0x%02x, err %d\n", REG_CONF1, + status); + return status; + } + + /* detect current state of hardware */ + data->temp_count = (status & 0x01) ? 4 : 3; + + /* force APD state if module parameter is set */ + if (apd == 0) { + /* force APD mode off */ + data->temp_count = 3; + status &= ~(0x01); + i2c_smbus_write_byte_data(client, REG_CONF1, status); + } else if (apd == 1) { + /* force APD mode on */ + data->temp_count = 4; + status |= 0x01; + i2c_smbus_write_byte_data(client, REG_CONF1, status); + } + } + + /* sysfs hooks */ + data->groups[idx++] = &emc2103_group; + if (data->temp_count >= 3) + data->groups[idx++] = &emc2103_temp3_group; + if (data->temp_count == 4) + data->groups[idx++] = &emc2103_temp4_group; + + hwmon_dev = devm_hwmon_device_register_with_groups(&client->dev, + client->name, data, + data->groups); + if (IS_ERR(hwmon_dev)) + return PTR_ERR(hwmon_dev); + + dev_info(&client->dev, "%s: sensor '%s'\n", + dev_name(hwmon_dev), client->name); + + return 0; +} + +static const struct i2c_device_id emc2103_ids[] = { + { "emc2103", 0, }, + { /* LIST END */ } +}; +MODULE_DEVICE_TABLE(i2c, emc2103_ids); + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int +emc2103_detect(struct i2c_client *new_client, struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = new_client->adapter; + int manufacturer, product; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + manufacturer = i2c_smbus_read_byte_data(new_client, REG_MFG_ID); + if (manufacturer != 0x5D) + return -ENODEV; + + product = i2c_smbus_read_byte_data(new_client, REG_PRODUCT_ID); + if ((product != 0x24) && (product != 0x26)) + return -ENODEV; + + strlcpy(info->type, "emc2103", I2C_NAME_SIZE); + + return 0; +} + +static struct i2c_driver emc2103_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "emc2103", + }, + .probe_new = emc2103_probe, + .id_table = emc2103_ids, + .detect = emc2103_detect, + .address_list = normal_i2c, +}; + +module_i2c_driver(emc2103_driver); + +MODULE_AUTHOR("Steve Glendinning "); +MODULE_DESCRIPTION("SMSC EMC2103 hwmon driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3