From 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 12:05:51 +0200 Subject: Adding upstream version 5.10.209. Signed-off-by: Daniel Baumann --- drivers/hwmon/gl518sm.c | 667 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 667 insertions(+) create mode 100644 drivers/hwmon/gl518sm.c (limited to 'drivers/hwmon/gl518sm.c') diff --git a/drivers/hwmon/gl518sm.c b/drivers/hwmon/gl518sm.c new file mode 100644 index 000000000..7aaee5a48 --- /dev/null +++ b/drivers/hwmon/gl518sm.c @@ -0,0 +1,667 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * gl518sm.c - Part of lm_sensors, Linux kernel modules for hardware + * monitoring + * Copyright (C) 1998, 1999 Frodo Looijaard and + * Kyosti Malkki + * Copyright (C) 2004 Hong-Gunn Chew and + * Jean Delvare + * + * Ported to Linux 2.6 by Hong-Gunn Chew with the help of Jean Delvare + * and advice of Greg Kroah-Hartman. + * + * Notes about the port: + * Release 0x00 of the GL518SM chipset doesn't support reading of in0, + * in1 nor in2. The original driver had an ugly workaround to get them + * anyway (changing limits and watching alarms trigger and wear off). + * We did not keep that part of the original driver in the Linux 2.6 + * version, since it was making the driver significantly more complex + * with no real benefit. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END }; + +enum chips { gl518sm_r00, gl518sm_r80 }; + +/* Many GL518 constants specified below */ + +/* The GL518 registers */ +#define GL518_REG_CHIP_ID 0x00 +#define GL518_REG_REVISION 0x01 +#define GL518_REG_VENDOR_ID 0x02 +#define GL518_REG_CONF 0x03 +#define GL518_REG_TEMP_IN 0x04 +#define GL518_REG_TEMP_MAX 0x05 +#define GL518_REG_TEMP_HYST 0x06 +#define GL518_REG_FAN_COUNT 0x07 +#define GL518_REG_FAN_LIMIT 0x08 +#define GL518_REG_VIN1_LIMIT 0x09 +#define GL518_REG_VIN2_LIMIT 0x0a +#define GL518_REG_VIN3_LIMIT 0x0b +#define GL518_REG_VDD_LIMIT 0x0c +#define GL518_REG_VIN3 0x0d +#define GL518_REG_MISC 0x0f +#define GL518_REG_ALARM 0x10 +#define GL518_REG_MASK 0x11 +#define GL518_REG_INT 0x12 +#define GL518_REG_VIN2 0x13 +#define GL518_REG_VIN1 0x14 +#define GL518_REG_VDD 0x15 + + +/* + * Conversions. Rounding and limit checking is only done on the TO_REG + * variants. Note that you should be a bit careful with which arguments + * these macros are called: arguments may be evaluated more than once. + * Fixing this is just not worth it. + */ + +#define RAW_FROM_REG(val) val + +#define BOOL_FROM_REG(val) ((val) ? 0 : 1) +#define BOOL_TO_REG(val) ((val) ? 0 : 1) + +#define TEMP_CLAMP(val) clamp_val(val, -119000, 136000) +#define TEMP_TO_REG(val) (DIV_ROUND_CLOSEST(TEMP_CLAMP(val), 1000) + 119) +#define TEMP_FROM_REG(val) (((val) - 119) * 1000) + +static inline u8 FAN_TO_REG(long rpm, int div) +{ + long rpmdiv; + if (rpm == 0) + return 0; + rpmdiv = clamp_val(rpm, 1, 960000) * div; + return clamp_val((480000 + rpmdiv / 2) / rpmdiv, 1, 255); +} +#define FAN_FROM_REG(val, div) ((val) == 0 ? 0 : (480000 / ((val) * (div)))) + +#define IN_CLAMP(val) clamp_val(val, 0, 255 * 19) +#define IN_TO_REG(val) DIV_ROUND_CLOSEST(IN_CLAMP(val), 19) +#define IN_FROM_REG(val) ((val) * 19) + +#define VDD_CLAMP(val) clamp_val(val, 0, 255 * 95 / 4) +#define VDD_TO_REG(val) DIV_ROUND_CLOSEST(VDD_CLAMP(val) * 4, 95) +#define VDD_FROM_REG(val) DIV_ROUND_CLOSEST((val) * 95, 4) + +#define DIV_FROM_REG(val) (1 << (val)) + +#define BEEP_MASK_TO_REG(val) ((val) & 0x7f & data->alarm_mask) +#define BEEP_MASK_FROM_REG(val) ((val) & 0x7f) + +/* Each client has this additional data */ +struct gl518_data { + struct i2c_client *client; + const struct attribute_group *groups[3]; + enum chips type; + + struct mutex update_lock; + char valid; /* !=0 if following fields are valid */ + unsigned long last_updated; /* In jiffies */ + + u8 voltage_in[4]; /* Register values; [0] = VDD */ + u8 voltage_min[4]; /* Register values; [0] = VDD */ + u8 voltage_max[4]; /* Register values; [0] = VDD */ + u8 fan_in[2]; + u8 fan_min[2]; + u8 fan_div[2]; /* Register encoding, shifted right */ + u8 fan_auto1; /* Boolean */ + u8 temp_in; /* Register values */ + u8 temp_max; /* Register values */ + u8 temp_hyst; /* Register values */ + u8 alarms; /* Register value */ + u8 alarm_mask; + u8 beep_mask; /* Register value */ + u8 beep_enable; /* Boolean */ +}; + +/* + * Registers 0x07 to 0x0c are word-sized, others are byte-sized + * GL518 uses a high-byte first convention, which is exactly opposite to + * the SMBus standard. + */ +static int gl518_read_value(struct i2c_client *client, u8 reg) +{ + if ((reg >= 0x07) && (reg <= 0x0c)) + return i2c_smbus_read_word_swapped(client, reg); + else + return i2c_smbus_read_byte_data(client, reg); +} + +static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value) +{ + if ((reg >= 0x07) && (reg <= 0x0c)) + return i2c_smbus_write_word_swapped(client, reg, value); + else + return i2c_smbus_write_byte_data(client, reg, value); +} + +static struct gl518_data *gl518_update_device(struct device *dev) +{ + struct gl518_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int val; + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + dev_dbg(&client->dev, "Starting gl518 update\n"); + + data->alarms = gl518_read_value(client, GL518_REG_INT); + data->beep_mask = gl518_read_value(client, GL518_REG_ALARM); + + val = gl518_read_value(client, GL518_REG_VDD_LIMIT); + data->voltage_min[0] = val & 0xff; + data->voltage_max[0] = (val >> 8) & 0xff; + val = gl518_read_value(client, GL518_REG_VIN1_LIMIT); + data->voltage_min[1] = val & 0xff; + data->voltage_max[1] = (val >> 8) & 0xff; + val = gl518_read_value(client, GL518_REG_VIN2_LIMIT); + data->voltage_min[2] = val & 0xff; + data->voltage_max[2] = (val >> 8) & 0xff; + val = gl518_read_value(client, GL518_REG_VIN3_LIMIT); + data->voltage_min[3] = val & 0xff; + data->voltage_max[3] = (val >> 8) & 0xff; + + val = gl518_read_value(client, GL518_REG_FAN_COUNT); + data->fan_in[0] = (val >> 8) & 0xff; + data->fan_in[1] = val & 0xff; + + val = gl518_read_value(client, GL518_REG_FAN_LIMIT); + data->fan_min[0] = (val >> 8) & 0xff; + data->fan_min[1] = val & 0xff; + + data->temp_in = gl518_read_value(client, GL518_REG_TEMP_IN); + data->temp_max = + gl518_read_value(client, GL518_REG_TEMP_MAX); + data->temp_hyst = + gl518_read_value(client, GL518_REG_TEMP_HYST); + + val = gl518_read_value(client, GL518_REG_MISC); + data->fan_div[0] = (val >> 6) & 0x03; + data->fan_div[1] = (val >> 4) & 0x03; + data->fan_auto1 = (val >> 3) & 0x01; + + data->alarms &= data->alarm_mask; + + val = gl518_read_value(client, GL518_REG_CONF); + data->beep_enable = (val >> 2) & 1; + + if (data->type != gl518sm_r00) { + data->voltage_in[0] = + gl518_read_value(client, GL518_REG_VDD); + data->voltage_in[1] = + gl518_read_value(client, GL518_REG_VIN1); + data->voltage_in[2] = + gl518_read_value(client, GL518_REG_VIN2); + } + data->voltage_in[3] = + gl518_read_value(client, GL518_REG_VIN3); + + data->last_updated = jiffies; + data->valid = 1; + } + + mutex_unlock(&data->update_lock); + + return data; +} + +/* + * Sysfs stuff + */ + +#define show(type, suffix, value) \ +static ssize_t show_##suffix(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct gl518_data *data = gl518_update_device(dev); \ + return sprintf(buf, "%d\n", type##_FROM_REG(data->value)); \ +} + +show(TEMP, temp_input1, temp_in); +show(TEMP, temp_max1, temp_max); +show(TEMP, temp_hyst1, temp_hyst); +show(BOOL, fan_auto1, fan_auto1); +show(VDD, in_input0, voltage_in[0]); +show(IN, in_input1, voltage_in[1]); +show(IN, in_input2, voltage_in[2]); +show(IN, in_input3, voltage_in[3]); +show(VDD, in_min0, voltage_min[0]); +show(IN, in_min1, voltage_min[1]); +show(IN, in_min2, voltage_min[2]); +show(IN, in_min3, voltage_min[3]); +show(VDD, in_max0, voltage_max[0]); +show(IN, in_max1, voltage_max[1]); +show(IN, in_max2, voltage_max[2]); +show(IN, in_max3, voltage_max[3]); +show(RAW, alarms, alarms); +show(BOOL, beep_enable, beep_enable); +show(BEEP_MASK, beep_mask, beep_mask); + +static ssize_t fan_input_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct gl518_data *data = gl518_update_device(dev); + return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_in[nr], + DIV_FROM_REG(data->fan_div[nr]))); +} + +static ssize_t fan_min_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct gl518_data *data = gl518_update_device(dev); + return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr], + DIV_FROM_REG(data->fan_div[nr]))); +} + +static ssize_t fan_div_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct gl518_data *data = gl518_update_device(dev); + return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr])); +} + +#define set(type, suffix, value, reg) \ +static ssize_t set_##suffix(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t count) \ +{ \ + struct gl518_data *data = dev_get_drvdata(dev); \ + struct i2c_client *client = data->client; \ + long val; \ + int err = kstrtol(buf, 10, &val); \ + if (err) \ + return err; \ + \ + mutex_lock(&data->update_lock); \ + data->value = type##_TO_REG(val); \ + gl518_write_value(client, reg, data->value); \ + mutex_unlock(&data->update_lock); \ + return count; \ +} + +#define set_bits(type, suffix, value, reg, mask, shift) \ +static ssize_t set_##suffix(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t count) \ +{ \ + struct gl518_data *data = dev_get_drvdata(dev); \ + struct i2c_client *client = data->client; \ + int regvalue; \ + unsigned long val; \ + int err = kstrtoul(buf, 10, &val); \ + if (err) \ + return err; \ + \ + mutex_lock(&data->update_lock); \ + regvalue = gl518_read_value(client, reg); \ + data->value = type##_TO_REG(val); \ + regvalue = (regvalue & ~mask) | (data->value << shift); \ + gl518_write_value(client, reg, regvalue); \ + mutex_unlock(&data->update_lock); \ + return count; \ +} + +#define set_low(type, suffix, value, reg) \ + set_bits(type, suffix, value, reg, 0x00ff, 0) +#define set_high(type, suffix, value, reg) \ + set_bits(type, suffix, value, reg, 0xff00, 8) + +set(TEMP, temp_max1, temp_max, GL518_REG_TEMP_MAX); +set(TEMP, temp_hyst1, temp_hyst, GL518_REG_TEMP_HYST); +set_bits(BOOL, fan_auto1, fan_auto1, GL518_REG_MISC, 0x08, 3); +set_low(VDD, in_min0, voltage_min[0], GL518_REG_VDD_LIMIT); +set_low(IN, in_min1, voltage_min[1], GL518_REG_VIN1_LIMIT); +set_low(IN, in_min2, voltage_min[2], GL518_REG_VIN2_LIMIT); +set_low(IN, in_min3, voltage_min[3], GL518_REG_VIN3_LIMIT); +set_high(VDD, in_max0, voltage_max[0], GL518_REG_VDD_LIMIT); +set_high(IN, in_max1, voltage_max[1], GL518_REG_VIN1_LIMIT); +set_high(IN, in_max2, voltage_max[2], GL518_REG_VIN2_LIMIT); +set_high(IN, in_max3, voltage_max[3], GL518_REG_VIN3_LIMIT); +set_bits(BOOL, beep_enable, beep_enable, GL518_REG_CONF, 0x04, 2); +set(BEEP_MASK, beep_mask, beep_mask, GL518_REG_ALARM); + +static ssize_t fan_min_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) +{ + struct gl518_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int nr = to_sensor_dev_attr(attr)->index; + int regvalue; + unsigned long val; + int err; + + err = kstrtoul(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + regvalue = gl518_read_value(client, GL518_REG_FAN_LIMIT); + data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr])); + regvalue = (regvalue & (0xff << (8 * nr))) + | (data->fan_min[nr] << (8 * (1 - nr))); + gl518_write_value(client, GL518_REG_FAN_LIMIT, regvalue); + + data->beep_mask = gl518_read_value(client, GL518_REG_ALARM); + if (data->fan_min[nr] == 0) + data->alarm_mask &= ~(0x20 << nr); + else + data->alarm_mask |= (0x20 << nr); + data->beep_mask &= data->alarm_mask; + gl518_write_value(client, GL518_REG_ALARM, data->beep_mask); + + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t fan_div_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) +{ + struct gl518_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int nr = to_sensor_dev_attr(attr)->index; + int regvalue; + unsigned long val; + int err; + + err = kstrtoul(buf, 10, &val); + if (err) + return err; + + switch (val) { + case 1: + val = 0; + break; + case 2: + val = 1; + break; + case 4: + val = 2; + break; + case 8: + val = 3; + break; + default: + dev_err(dev, + "Invalid fan clock divider %lu, choose one of 1, 2, 4 or 8\n", + val); + return -EINVAL; + } + + mutex_lock(&data->update_lock); + regvalue = gl518_read_value(client, GL518_REG_MISC); + data->fan_div[nr] = val; + regvalue = (regvalue & ~(0xc0 >> (2 * nr))) + | (data->fan_div[nr] << (6 - 2 * nr)); + gl518_write_value(client, GL518_REG_MISC, regvalue); + mutex_unlock(&data->update_lock); + return count; +} + +static DEVICE_ATTR(temp1_input, 0444, show_temp_input1, NULL); +static DEVICE_ATTR(temp1_max, 0644, show_temp_max1, set_temp_max1); +static DEVICE_ATTR(temp1_max_hyst, 0644, + show_temp_hyst1, set_temp_hyst1); +static DEVICE_ATTR(fan1_auto, 0644, show_fan_auto1, set_fan_auto1); +static SENSOR_DEVICE_ATTR_RO(fan1_input, fan_input, 0); +static SENSOR_DEVICE_ATTR_RO(fan2_input, fan_input, 1); +static SENSOR_DEVICE_ATTR_RW(fan1_min, fan_min, 0); +static SENSOR_DEVICE_ATTR_RW(fan2_min, fan_min, 1); +static SENSOR_DEVICE_ATTR_RW(fan1_div, fan_div, 0); +static SENSOR_DEVICE_ATTR_RW(fan2_div, fan_div, 1); +static DEVICE_ATTR(in0_input, 0444, show_in_input0, NULL); +static DEVICE_ATTR(in1_input, 0444, show_in_input1, NULL); +static DEVICE_ATTR(in2_input, 0444, show_in_input2, NULL); +static DEVICE_ATTR(in3_input, 0444, show_in_input3, NULL); +static DEVICE_ATTR(in0_min, 0644, show_in_min0, set_in_min0); +static DEVICE_ATTR(in1_min, 0644, show_in_min1, set_in_min1); +static DEVICE_ATTR(in2_min, 0644, show_in_min2, set_in_min2); +static DEVICE_ATTR(in3_min, 0644, show_in_min3, set_in_min3); +static DEVICE_ATTR(in0_max, 0644, show_in_max0, set_in_max0); +static DEVICE_ATTR(in1_max, 0644, show_in_max1, set_in_max1); +static DEVICE_ATTR(in2_max, 0644, show_in_max2, set_in_max2); +static DEVICE_ATTR(in3_max, 0644, show_in_max3, set_in_max3); +static DEVICE_ATTR(alarms, 0444, show_alarms, NULL); +static DEVICE_ATTR(beep_enable, 0644, + show_beep_enable, set_beep_enable); +static DEVICE_ATTR(beep_mask, 0644, + show_beep_mask, set_beep_mask); + +static ssize_t alarm_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int bitnr = to_sensor_dev_attr(attr)->index; + struct gl518_data *data = gl518_update_device(dev); + return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1); +} + +static SENSOR_DEVICE_ATTR_RO(in0_alarm, alarm, 0); +static SENSOR_DEVICE_ATTR_RO(in1_alarm, alarm, 1); +static SENSOR_DEVICE_ATTR_RO(in2_alarm, alarm, 2); +static SENSOR_DEVICE_ATTR_RO(in3_alarm, alarm, 3); +static SENSOR_DEVICE_ATTR_RO(temp1_alarm, alarm, 4); +static SENSOR_DEVICE_ATTR_RO(fan1_alarm, alarm, 5); +static SENSOR_DEVICE_ATTR_RO(fan2_alarm, alarm, 6); + +static ssize_t beep_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int bitnr = to_sensor_dev_attr(attr)->index; + struct gl518_data *data = gl518_update_device(dev); + return sprintf(buf, "%u\n", (data->beep_mask >> bitnr) & 1); +} + +static ssize_t beep_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct gl518_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int bitnr = to_sensor_dev_attr(attr)->index; + unsigned long bit; + int err; + + err = kstrtoul(buf, 10, &bit); + if (err) + return err; + + if (bit & ~1) + return -EINVAL; + + mutex_lock(&data->update_lock); + data->beep_mask = gl518_read_value(client, GL518_REG_ALARM); + if (bit) + data->beep_mask |= (1 << bitnr); + else + data->beep_mask &= ~(1 << bitnr); + gl518_write_value(client, GL518_REG_ALARM, data->beep_mask); + mutex_unlock(&data->update_lock); + return count; +} + +static SENSOR_DEVICE_ATTR_RW(in0_beep, beep, 0); +static SENSOR_DEVICE_ATTR_RW(in1_beep, beep, 1); +static SENSOR_DEVICE_ATTR_RW(in2_beep, beep, 2); +static SENSOR_DEVICE_ATTR_RW(in3_beep, beep, 3); +static SENSOR_DEVICE_ATTR_RW(temp1_beep, beep, 4); +static SENSOR_DEVICE_ATTR_RW(fan1_beep, beep, 5); +static SENSOR_DEVICE_ATTR_RW(fan2_beep, beep, 6); + +static struct attribute *gl518_attributes[] = { + &dev_attr_in3_input.attr, + &dev_attr_in0_min.attr, + &dev_attr_in1_min.attr, + &dev_attr_in2_min.attr, + &dev_attr_in3_min.attr, + &dev_attr_in0_max.attr, + &dev_attr_in1_max.attr, + &dev_attr_in2_max.attr, + &dev_attr_in3_max.attr, + &sensor_dev_attr_in0_alarm.dev_attr.attr, + &sensor_dev_attr_in1_alarm.dev_attr.attr, + &sensor_dev_attr_in2_alarm.dev_attr.attr, + &sensor_dev_attr_in3_alarm.dev_attr.attr, + &sensor_dev_attr_in0_beep.dev_attr.attr, + &sensor_dev_attr_in1_beep.dev_attr.attr, + &sensor_dev_attr_in2_beep.dev_attr.attr, + &sensor_dev_attr_in3_beep.dev_attr.attr, + + &dev_attr_fan1_auto.attr, + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_fan2_input.dev_attr.attr, + &sensor_dev_attr_fan1_min.dev_attr.attr, + &sensor_dev_attr_fan2_min.dev_attr.attr, + &sensor_dev_attr_fan1_div.dev_attr.attr, + &sensor_dev_attr_fan2_div.dev_attr.attr, + &sensor_dev_attr_fan1_alarm.dev_attr.attr, + &sensor_dev_attr_fan2_alarm.dev_attr.attr, + &sensor_dev_attr_fan1_beep.dev_attr.attr, + &sensor_dev_attr_fan2_beep.dev_attr.attr, + + &dev_attr_temp1_input.attr, + &dev_attr_temp1_max.attr, + &dev_attr_temp1_max_hyst.attr, + &sensor_dev_attr_temp1_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_beep.dev_attr.attr, + + &dev_attr_alarms.attr, + &dev_attr_beep_enable.attr, + &dev_attr_beep_mask.attr, + NULL +}; + +static const struct attribute_group gl518_group = { + .attrs = gl518_attributes, +}; + +static struct attribute *gl518_attributes_r80[] = { + &dev_attr_in0_input.attr, + &dev_attr_in1_input.attr, + &dev_attr_in2_input.attr, + NULL +}; + +static const struct attribute_group gl518_group_r80 = { + .attrs = gl518_attributes_r80, +}; + +/* + * Real code + */ + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int gl518_detect(struct i2c_client *client, struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + int rev; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_WORD_DATA)) + return -ENODEV; + + /* Now, we do the remaining detection. */ + if ((gl518_read_value(client, GL518_REG_CHIP_ID) != 0x80) + || (gl518_read_value(client, GL518_REG_CONF) & 0x80)) + return -ENODEV; + + /* Determine the chip type. */ + rev = gl518_read_value(client, GL518_REG_REVISION); + if (rev != 0x00 && rev != 0x80) + return -ENODEV; + + strlcpy(info->type, "gl518sm", I2C_NAME_SIZE); + + return 0; +} + +/* + * Called when we have found a new GL518SM. + * Note that we preserve D4:NoFan2 and D2:beep_enable. + */ +static void gl518_init_client(struct i2c_client *client) +{ + /* Make sure we leave D7:Reset untouched */ + u8 regvalue = gl518_read_value(client, GL518_REG_CONF) & 0x7f; + + /* Comparator mode (D3=0), standby mode (D6=0) */ + gl518_write_value(client, GL518_REG_CONF, (regvalue &= 0x37)); + + /* Never interrupts */ + gl518_write_value(client, GL518_REG_MASK, 0x00); + + /* Clear status register (D5=1), start (D6=1) */ + gl518_write_value(client, GL518_REG_CONF, 0x20 | regvalue); + gl518_write_value(client, GL518_REG_CONF, 0x40 | regvalue); +} + +static int gl518_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct device *hwmon_dev; + struct gl518_data *data; + int revision; + + data = devm_kzalloc(dev, sizeof(struct gl518_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->client = client; + revision = gl518_read_value(client, GL518_REG_REVISION); + data->type = revision == 0x80 ? gl518sm_r80 : gl518sm_r00; + mutex_init(&data->update_lock); + + /* Initialize the GL518SM chip */ + data->alarm_mask = 0xff; + gl518_init_client(client); + + /* sysfs hooks */ + data->groups[0] = &gl518_group; + if (data->type == gl518sm_r80) + data->groups[1] = &gl518_group_r80; + + hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, + data, data->groups); + return PTR_ERR_OR_ZERO(hwmon_dev); +} + +static const struct i2c_device_id gl518_id[] = { + { "gl518sm", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, gl518_id); + +static struct i2c_driver gl518_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "gl518sm", + }, + .probe_new = gl518_probe, + .id_table = gl518_id, + .detect = gl518_detect, + .address_list = normal_i2c, +}; + +module_i2c_driver(gl518_driver); + +MODULE_AUTHOR("Frodo Looijaard , " + "Kyosti Malkki and " + "Hong-Gunn Chew "); +MODULE_DESCRIPTION("GL518SM driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3