From 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 12:05:51 +0200 Subject: Adding upstream version 5.10.209. Signed-off-by: Daniel Baumann --- drivers/iio/adc/stm32-adc-core.c | 839 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 839 insertions(+) create mode 100644 drivers/iio/adc/stm32-adc-core.c (limited to 'drivers/iio/adc/stm32-adc-core.c') diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c new file mode 100644 index 000000000..20fc867e3 --- /dev/null +++ b/drivers/iio/adc/stm32-adc-core.c @@ -0,0 +1,839 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * This file is part of STM32 ADC driver + * + * Copyright (C) 2016, STMicroelectronics - All Rights Reserved + * Author: Fabrice Gasnier . + * + * Inspired from: fsl-imx25-tsadc + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "stm32-adc-core.h" + +#define STM32_ADC_CORE_SLEEP_DELAY_MS 2000 + +/* SYSCFG registers */ +#define STM32MP1_SYSCFG_PMCSETR 0x04 +#define STM32MP1_SYSCFG_PMCCLRR 0x44 + +/* SYSCFG bit fields */ +#define STM32MP1_SYSCFG_ANASWVDD_MASK BIT(9) + +/* SYSCFG capability flags */ +#define HAS_VBOOSTER BIT(0) +#define HAS_ANASWVDD BIT(1) + +/** + * struct stm32_adc_common_regs - stm32 common registers + * @csr: common status register offset + * @ccr: common control register offset + * @eoc_msk: array of eoc (end of conversion flag) masks in csr for adc1..n + * @ovr_msk: array of ovr (overrun flag) masks in csr for adc1..n + * @ier: interrupt enable register offset for each adc + * @eocie_msk: end of conversion interrupt enable mask in @ier + */ +struct stm32_adc_common_regs { + u32 csr; + u32 ccr; + u32 eoc_msk[STM32_ADC_MAX_ADCS]; + u32 ovr_msk[STM32_ADC_MAX_ADCS]; + u32 ier; + u32 eocie_msk; +}; + +struct stm32_adc_priv; + +/** + * struct stm32_adc_priv_cfg - stm32 core compatible configuration data + * @regs: common registers for all instances + * @clk_sel: clock selection routine + * @max_clk_rate_hz: maximum analog clock rate (Hz, from datasheet) + * @has_syscfg: SYSCFG capability flags + * @num_irqs: number of interrupt lines + * @num_adcs: maximum number of ADC instances in the common registers + */ +struct stm32_adc_priv_cfg { + const struct stm32_adc_common_regs *regs; + int (*clk_sel)(struct platform_device *, struct stm32_adc_priv *); + u32 max_clk_rate_hz; + unsigned int has_syscfg; + unsigned int num_irqs; + unsigned int num_adcs; +}; + +/** + * struct stm32_adc_priv - stm32 ADC core private data + * @irq: irq(s) for ADC block + * @domain: irq domain reference + * @aclk: clock reference for the analog circuitry + * @bclk: bus clock common for all ADCs, depends on part used + * @max_clk_rate: desired maximum clock rate + * @booster: booster supply reference + * @vdd: vdd supply reference + * @vdda: vdda analog supply reference + * @vref: regulator reference + * @vdd_uv: vdd supply voltage (microvolts) + * @vdda_uv: vdda supply voltage (microvolts) + * @cfg: compatible configuration data + * @common: common data for all ADC instances + * @ccr_bak: backup CCR in low power mode + * @syscfg: reference to syscon, system control registers + */ +struct stm32_adc_priv { + int irq[STM32_ADC_MAX_ADCS]; + struct irq_domain *domain; + struct clk *aclk; + struct clk *bclk; + u32 max_clk_rate; + struct regulator *booster; + struct regulator *vdd; + struct regulator *vdda; + struct regulator *vref; + int vdd_uv; + int vdda_uv; + const struct stm32_adc_priv_cfg *cfg; + struct stm32_adc_common common; + u32 ccr_bak; + struct regmap *syscfg; +}; + +static struct stm32_adc_priv *to_stm32_adc_priv(struct stm32_adc_common *com) +{ + return container_of(com, struct stm32_adc_priv, common); +} + +/* STM32F4 ADC internal common clock prescaler division ratios */ +static int stm32f4_pclk_div[] = {2, 4, 6, 8}; + +/** + * stm32f4_adc_clk_sel() - Select stm32f4 ADC common clock prescaler + * @pdev: platform device + * @priv: stm32 ADC core private data + * Select clock prescaler used for analog conversions, before using ADC. + */ +static int stm32f4_adc_clk_sel(struct platform_device *pdev, + struct stm32_adc_priv *priv) +{ + unsigned long rate; + u32 val; + int i; + + /* stm32f4 has one clk input for analog (mandatory), enforce it here */ + if (!priv->aclk) { + dev_err(&pdev->dev, "No 'adc' clock found\n"); + return -ENOENT; + } + + rate = clk_get_rate(priv->aclk); + if (!rate) { + dev_err(&pdev->dev, "Invalid clock rate: 0\n"); + return -EINVAL; + } + + for (i = 0; i < ARRAY_SIZE(stm32f4_pclk_div); i++) { + if ((rate / stm32f4_pclk_div[i]) <= priv->max_clk_rate) + break; + } + if (i >= ARRAY_SIZE(stm32f4_pclk_div)) { + dev_err(&pdev->dev, "adc clk selection failed\n"); + return -EINVAL; + } + + priv->common.rate = rate / stm32f4_pclk_div[i]; + val = readl_relaxed(priv->common.base + STM32F4_ADC_CCR); + val &= ~STM32F4_ADC_ADCPRE_MASK; + val |= i << STM32F4_ADC_ADCPRE_SHIFT; + writel_relaxed(val, priv->common.base + STM32F4_ADC_CCR); + + dev_dbg(&pdev->dev, "Using analog clock source at %ld kHz\n", + priv->common.rate / 1000); + + return 0; +} + +/** + * struct stm32h7_adc_ck_spec - specification for stm32h7 adc clock + * @ckmode: ADC clock mode, Async or sync with prescaler. + * @presc: prescaler bitfield for async clock mode + * @div: prescaler division ratio + */ +struct stm32h7_adc_ck_spec { + u32 ckmode; + u32 presc; + int div; +}; + +static const struct stm32h7_adc_ck_spec stm32h7_adc_ckmodes_spec[] = { + /* 00: CK_ADC[1..3]: Asynchronous clock modes */ + { 0, 0, 1 }, + { 0, 1, 2 }, + { 0, 2, 4 }, + { 0, 3, 6 }, + { 0, 4, 8 }, + { 0, 5, 10 }, + { 0, 6, 12 }, + { 0, 7, 16 }, + { 0, 8, 32 }, + { 0, 9, 64 }, + { 0, 10, 128 }, + { 0, 11, 256 }, + /* HCLK used: Synchronous clock modes (1, 2 or 4 prescaler) */ + { 1, 0, 1 }, + { 2, 0, 2 }, + { 3, 0, 4 }, +}; + +static int stm32h7_adc_clk_sel(struct platform_device *pdev, + struct stm32_adc_priv *priv) +{ + u32 ckmode, presc, val; + unsigned long rate; + int i, div; + + /* stm32h7 bus clock is common for all ADC instances (mandatory) */ + if (!priv->bclk) { + dev_err(&pdev->dev, "No 'bus' clock found\n"); + return -ENOENT; + } + + /* + * stm32h7 can use either 'bus' or 'adc' clock for analog circuitry. + * So, choice is to have bus clock mandatory and adc clock optional. + * If optional 'adc' clock has been found, then try to use it first. + */ + if (priv->aclk) { + /* + * Asynchronous clock modes (e.g. ckmode == 0) + * From spec: PLL output musn't exceed max rate + */ + rate = clk_get_rate(priv->aclk); + if (!rate) { + dev_err(&pdev->dev, "Invalid adc clock rate: 0\n"); + return -EINVAL; + } + + for (i = 0; i < ARRAY_SIZE(stm32h7_adc_ckmodes_spec); i++) { + ckmode = stm32h7_adc_ckmodes_spec[i].ckmode; + presc = stm32h7_adc_ckmodes_spec[i].presc; + div = stm32h7_adc_ckmodes_spec[i].div; + + if (ckmode) + continue; + + if ((rate / div) <= priv->max_clk_rate) + goto out; + } + } + + /* Synchronous clock modes (e.g. ckmode is 1, 2 or 3) */ + rate = clk_get_rate(priv->bclk); + if (!rate) { + dev_err(&pdev->dev, "Invalid bus clock rate: 0\n"); + return -EINVAL; + } + + for (i = 0; i < ARRAY_SIZE(stm32h7_adc_ckmodes_spec); i++) { + ckmode = stm32h7_adc_ckmodes_spec[i].ckmode; + presc = stm32h7_adc_ckmodes_spec[i].presc; + div = stm32h7_adc_ckmodes_spec[i].div; + + if (!ckmode) + continue; + + if ((rate / div) <= priv->max_clk_rate) + goto out; + } + + dev_err(&pdev->dev, "adc clk selection failed\n"); + return -EINVAL; + +out: + /* rate used later by each ADC instance to control BOOST mode */ + priv->common.rate = rate / div; + + /* Set common clock mode and prescaler */ + val = readl_relaxed(priv->common.base + STM32H7_ADC_CCR); + val &= ~(STM32H7_CKMODE_MASK | STM32H7_PRESC_MASK); + val |= ckmode << STM32H7_CKMODE_SHIFT; + val |= presc << STM32H7_PRESC_SHIFT; + writel_relaxed(val, priv->common.base + STM32H7_ADC_CCR); + + dev_dbg(&pdev->dev, "Using %s clock/%d source at %ld kHz\n", + ckmode ? "bus" : "adc", div, priv->common.rate / 1000); + + return 0; +} + +/* STM32F4 common registers definitions */ +static const struct stm32_adc_common_regs stm32f4_adc_common_regs = { + .csr = STM32F4_ADC_CSR, + .ccr = STM32F4_ADC_CCR, + .eoc_msk = { STM32F4_EOC1, STM32F4_EOC2, STM32F4_EOC3}, + .ovr_msk = { STM32F4_OVR1, STM32F4_OVR2, STM32F4_OVR3}, + .ier = STM32F4_ADC_CR1, + .eocie_msk = STM32F4_EOCIE, +}; + +/* STM32H7 common registers definitions */ +static const struct stm32_adc_common_regs stm32h7_adc_common_regs = { + .csr = STM32H7_ADC_CSR, + .ccr = STM32H7_ADC_CCR, + .eoc_msk = { STM32H7_EOC_MST, STM32H7_EOC_SLV}, + .ovr_msk = { STM32H7_OVR_MST, STM32H7_OVR_SLV}, + .ier = STM32H7_ADC_IER, + .eocie_msk = STM32H7_EOCIE, +}; + +static const unsigned int stm32_adc_offset[STM32_ADC_MAX_ADCS] = { + 0, STM32_ADC_OFFSET, STM32_ADC_OFFSET * 2, +}; + +static unsigned int stm32_adc_eoc_enabled(struct stm32_adc_priv *priv, + unsigned int adc) +{ + u32 ier, offset = stm32_adc_offset[adc]; + + ier = readl_relaxed(priv->common.base + offset + priv->cfg->regs->ier); + + return ier & priv->cfg->regs->eocie_msk; +} + +/* ADC common interrupt for all instances */ +static void stm32_adc_irq_handler(struct irq_desc *desc) +{ + struct stm32_adc_priv *priv = irq_desc_get_handler_data(desc); + struct irq_chip *chip = irq_desc_get_chip(desc); + int i; + u32 status; + + chained_irq_enter(chip, desc); + status = readl_relaxed(priv->common.base + priv->cfg->regs->csr); + + /* + * End of conversion may be handled by using IRQ or DMA. There may be a + * race here when two conversions complete at the same time on several + * ADCs. EOC may be read 'set' for several ADCs, with: + * - an ADC configured to use DMA (EOC triggers the DMA request, and + * is then automatically cleared by DR read in hardware) + * - an ADC configured to use IRQs (EOCIE bit is set. The handler must + * be called in this case) + * So both EOC status bit in CSR and EOCIE control bit must be checked + * before invoking the interrupt handler (e.g. call ISR only for + * IRQ-enabled ADCs). + */ + for (i = 0; i < priv->cfg->num_adcs; i++) { + if ((status & priv->cfg->regs->eoc_msk[i] && + stm32_adc_eoc_enabled(priv, i)) || + (status & priv->cfg->regs->ovr_msk[i])) + generic_handle_irq(irq_find_mapping(priv->domain, i)); + } + + chained_irq_exit(chip, desc); +}; + +static int stm32_adc_domain_map(struct irq_domain *d, unsigned int irq, + irq_hw_number_t hwirq) +{ + irq_set_chip_data(irq, d->host_data); + irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_level_irq); + + return 0; +} + +static void stm32_adc_domain_unmap(struct irq_domain *d, unsigned int irq) +{ + irq_set_chip_and_handler(irq, NULL, NULL); + irq_set_chip_data(irq, NULL); +} + +static const struct irq_domain_ops stm32_adc_domain_ops = { + .map = stm32_adc_domain_map, + .unmap = stm32_adc_domain_unmap, + .xlate = irq_domain_xlate_onecell, +}; + +static int stm32_adc_irq_probe(struct platform_device *pdev, + struct stm32_adc_priv *priv) +{ + struct device_node *np = pdev->dev.of_node; + unsigned int i; + + /* + * Interrupt(s) must be provided, depending on the compatible: + * - stm32f4/h7 shares a common interrupt line. + * - stm32mp1, has one line per ADC + */ + for (i = 0; i < priv->cfg->num_irqs; i++) { + priv->irq[i] = platform_get_irq(pdev, i); + if (priv->irq[i] < 0) + return priv->irq[i]; + } + + priv->domain = irq_domain_add_simple(np, STM32_ADC_MAX_ADCS, 0, + &stm32_adc_domain_ops, + priv); + if (!priv->domain) { + dev_err(&pdev->dev, "Failed to add irq domain\n"); + return -ENOMEM; + } + + for (i = 0; i < priv->cfg->num_irqs; i++) { + irq_set_chained_handler(priv->irq[i], stm32_adc_irq_handler); + irq_set_handler_data(priv->irq[i], priv); + } + + return 0; +} + +static void stm32_adc_irq_remove(struct platform_device *pdev, + struct stm32_adc_priv *priv) +{ + int hwirq; + unsigned int i; + + for (hwirq = 0; hwirq < STM32_ADC_MAX_ADCS; hwirq++) + irq_dispose_mapping(irq_find_mapping(priv->domain, hwirq)); + irq_domain_remove(priv->domain); + + for (i = 0; i < priv->cfg->num_irqs; i++) + irq_set_chained_handler(priv->irq[i], NULL); +} + +static int stm32_adc_core_switches_supply_en(struct stm32_adc_priv *priv, + struct device *dev) +{ + int ret; + + /* + * On STM32H7 and STM32MP1, the ADC inputs are multiplexed with analog + * switches (via PCSEL) which have reduced performances when their + * supply is below 2.7V (vdda by default): + * - Voltage booster can be used, to get full ADC performances + * (increases power consumption). + * - Vdd can be used to supply them, if above 2.7V (STM32MP1 only). + * + * Recommended settings for ANASWVDD and EN_BOOSTER: + * - vdda < 2.7V but vdd > 2.7V: ANASWVDD = 1, EN_BOOSTER = 0 (stm32mp1) + * - vdda < 2.7V and vdd < 2.7V: ANASWVDD = 0, EN_BOOSTER = 1 + * - vdda >= 2.7V: ANASWVDD = 0, EN_BOOSTER = 0 (default) + */ + if (priv->vdda_uv < 2700000) { + if (priv->syscfg && priv->vdd_uv > 2700000) { + ret = regulator_enable(priv->vdd); + if (ret < 0) { + dev_err(dev, "vdd enable failed %d\n", ret); + return ret; + } + + ret = regmap_write(priv->syscfg, + STM32MP1_SYSCFG_PMCSETR, + STM32MP1_SYSCFG_ANASWVDD_MASK); + if (ret < 0) { + regulator_disable(priv->vdd); + dev_err(dev, "vdd select failed, %d\n", ret); + return ret; + } + dev_dbg(dev, "analog switches supplied by vdd\n"); + + return 0; + } + + if (priv->booster) { + /* + * This is optional, as this is a trade-off between + * analog performance and power consumption. + */ + ret = regulator_enable(priv->booster); + if (ret < 0) { + dev_err(dev, "booster enable failed %d\n", ret); + return ret; + } + dev_dbg(dev, "analog switches supplied by booster\n"); + + return 0; + } + } + + /* Fallback using vdda (default), nothing to do */ + dev_dbg(dev, "analog switches supplied by vdda (%d uV)\n", + priv->vdda_uv); + + return 0; +} + +static void stm32_adc_core_switches_supply_dis(struct stm32_adc_priv *priv) +{ + if (priv->vdda_uv < 2700000) { + if (priv->syscfg && priv->vdd_uv > 2700000) { + regmap_write(priv->syscfg, STM32MP1_SYSCFG_PMCCLRR, + STM32MP1_SYSCFG_ANASWVDD_MASK); + regulator_disable(priv->vdd); + return; + } + if (priv->booster) + regulator_disable(priv->booster); + } +} + +static int stm32_adc_core_hw_start(struct device *dev) +{ + struct stm32_adc_common *common = dev_get_drvdata(dev); + struct stm32_adc_priv *priv = to_stm32_adc_priv(common); + int ret; + + ret = regulator_enable(priv->vdda); + if (ret < 0) { + dev_err(dev, "vdda enable failed %d\n", ret); + return ret; + } + + ret = regulator_get_voltage(priv->vdda); + if (ret < 0) { + dev_err(dev, "vdda get voltage failed, %d\n", ret); + goto err_vdda_disable; + } + priv->vdda_uv = ret; + + ret = stm32_adc_core_switches_supply_en(priv, dev); + if (ret < 0) + goto err_vdda_disable; + + ret = regulator_enable(priv->vref); + if (ret < 0) { + dev_err(dev, "vref enable failed\n"); + goto err_switches_dis; + } + + if (priv->bclk) { + ret = clk_prepare_enable(priv->bclk); + if (ret < 0) { + dev_err(dev, "bus clk enable failed\n"); + goto err_regulator_disable; + } + } + + if (priv->aclk) { + ret = clk_prepare_enable(priv->aclk); + if (ret < 0) { + dev_err(dev, "adc clk enable failed\n"); + goto err_bclk_disable; + } + } + + writel_relaxed(priv->ccr_bak, priv->common.base + priv->cfg->regs->ccr); + + return 0; + +err_bclk_disable: + if (priv->bclk) + clk_disable_unprepare(priv->bclk); +err_regulator_disable: + regulator_disable(priv->vref); +err_switches_dis: + stm32_adc_core_switches_supply_dis(priv); +err_vdda_disable: + regulator_disable(priv->vdda); + + return ret; +} + +static void stm32_adc_core_hw_stop(struct device *dev) +{ + struct stm32_adc_common *common = dev_get_drvdata(dev); + struct stm32_adc_priv *priv = to_stm32_adc_priv(common); + + /* Backup CCR that may be lost (depends on power state to achieve) */ + priv->ccr_bak = readl_relaxed(priv->common.base + priv->cfg->regs->ccr); + if (priv->aclk) + clk_disable_unprepare(priv->aclk); + if (priv->bclk) + clk_disable_unprepare(priv->bclk); + regulator_disable(priv->vref); + stm32_adc_core_switches_supply_dis(priv); + regulator_disable(priv->vdda); +} + +static int stm32_adc_core_switches_probe(struct device *dev, + struct stm32_adc_priv *priv) +{ + struct device_node *np = dev->of_node; + int ret; + + /* Analog switches supply can be controlled by syscfg (optional) */ + priv->syscfg = syscon_regmap_lookup_by_phandle(np, "st,syscfg"); + if (IS_ERR(priv->syscfg)) { + ret = PTR_ERR(priv->syscfg); + if (ret != -ENODEV) + return dev_err_probe(dev, ret, "Can't probe syscfg\n"); + + priv->syscfg = NULL; + } + + /* Booster can be used to supply analog switches (optional) */ + if (priv->cfg->has_syscfg & HAS_VBOOSTER && + of_property_read_bool(np, "booster-supply")) { + priv->booster = devm_regulator_get_optional(dev, "booster"); + if (IS_ERR(priv->booster)) { + ret = PTR_ERR(priv->booster); + if (ret != -ENODEV) + return dev_err_probe(dev, ret, "can't get booster\n"); + + priv->booster = NULL; + } + } + + /* Vdd can be used to supply analog switches (optional) */ + if (priv->cfg->has_syscfg & HAS_ANASWVDD && + of_property_read_bool(np, "vdd-supply")) { + priv->vdd = devm_regulator_get_optional(dev, "vdd"); + if (IS_ERR(priv->vdd)) { + ret = PTR_ERR(priv->vdd); + if (ret != -ENODEV) + return dev_err_probe(dev, ret, "can't get vdd\n"); + + priv->vdd = NULL; + } + } + + if (priv->vdd) { + ret = regulator_enable(priv->vdd); + if (ret < 0) { + dev_err(dev, "vdd enable failed %d\n", ret); + return ret; + } + + ret = regulator_get_voltage(priv->vdd); + if (ret < 0) { + dev_err(dev, "vdd get voltage failed %d\n", ret); + regulator_disable(priv->vdd); + return ret; + } + priv->vdd_uv = ret; + + regulator_disable(priv->vdd); + } + + return 0; +} + +static int stm32_adc_probe(struct platform_device *pdev) +{ + struct stm32_adc_priv *priv; + struct device *dev = &pdev->dev; + struct device_node *np = pdev->dev.of_node; + struct resource *res; + u32 max_rate; + int ret; + + if (!pdev->dev.of_node) + return -ENODEV; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + platform_set_drvdata(pdev, &priv->common); + + priv->cfg = (const struct stm32_adc_priv_cfg *) + of_match_device(dev->driver->of_match_table, dev)->data; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->common.base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(priv->common.base)) + return PTR_ERR(priv->common.base); + priv->common.phys_base = res->start; + + priv->vdda = devm_regulator_get(&pdev->dev, "vdda"); + if (IS_ERR(priv->vdda)) + return dev_err_probe(&pdev->dev, PTR_ERR(priv->vdda), + "vdda get failed\n"); + + priv->vref = devm_regulator_get(&pdev->dev, "vref"); + if (IS_ERR(priv->vref)) + return dev_err_probe(&pdev->dev, PTR_ERR(priv->vref), + "vref get failed\n"); + + priv->aclk = devm_clk_get_optional(&pdev->dev, "adc"); + if (IS_ERR(priv->aclk)) + return dev_err_probe(&pdev->dev, PTR_ERR(priv->aclk), + "Can't get 'adc' clock\n"); + + priv->bclk = devm_clk_get_optional(&pdev->dev, "bus"); + if (IS_ERR(priv->bclk)) + return dev_err_probe(&pdev->dev, PTR_ERR(priv->bclk), + "Can't get 'bus' clock\n"); + + ret = stm32_adc_core_switches_probe(dev, priv); + if (ret) + return ret; + + pm_runtime_get_noresume(dev); + pm_runtime_set_active(dev); + pm_runtime_set_autosuspend_delay(dev, STM32_ADC_CORE_SLEEP_DELAY_MS); + pm_runtime_use_autosuspend(dev); + pm_runtime_enable(dev); + + ret = stm32_adc_core_hw_start(dev); + if (ret) + goto err_pm_stop; + + ret = regulator_get_voltage(priv->vref); + if (ret < 0) { + dev_err(&pdev->dev, "vref get voltage failed, %d\n", ret); + goto err_hw_stop; + } + priv->common.vref_mv = ret / 1000; + dev_dbg(&pdev->dev, "vref+=%dmV\n", priv->common.vref_mv); + + ret = of_property_read_u32(pdev->dev.of_node, "st,max-clk-rate-hz", + &max_rate); + if (!ret) + priv->max_clk_rate = min(max_rate, priv->cfg->max_clk_rate_hz); + else + priv->max_clk_rate = priv->cfg->max_clk_rate_hz; + + ret = priv->cfg->clk_sel(pdev, priv); + if (ret < 0) + goto err_hw_stop; + + ret = stm32_adc_irq_probe(pdev, priv); + if (ret < 0) + goto err_hw_stop; + + ret = of_platform_populate(np, NULL, NULL, &pdev->dev); + if (ret < 0) { + dev_err(&pdev->dev, "failed to populate DT children\n"); + goto err_irq_remove; + } + + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + + return 0; + +err_irq_remove: + stm32_adc_irq_remove(pdev, priv); +err_hw_stop: + stm32_adc_core_hw_stop(dev); +err_pm_stop: + pm_runtime_disable(dev); + pm_runtime_set_suspended(dev); + pm_runtime_put_noidle(dev); + + return ret; +} + +static int stm32_adc_remove(struct platform_device *pdev) +{ + struct stm32_adc_common *common = platform_get_drvdata(pdev); + struct stm32_adc_priv *priv = to_stm32_adc_priv(common); + + pm_runtime_get_sync(&pdev->dev); + of_platform_depopulate(&pdev->dev); + stm32_adc_irq_remove(pdev, priv); + stm32_adc_core_hw_stop(&pdev->dev); + pm_runtime_disable(&pdev->dev); + pm_runtime_set_suspended(&pdev->dev); + pm_runtime_put_noidle(&pdev->dev); + + return 0; +} + +#if defined(CONFIG_PM) +static int stm32_adc_core_runtime_suspend(struct device *dev) +{ + stm32_adc_core_hw_stop(dev); + + return 0; +} + +static int stm32_adc_core_runtime_resume(struct device *dev) +{ + return stm32_adc_core_hw_start(dev); +} + +static int stm32_adc_core_runtime_idle(struct device *dev) +{ + pm_runtime_mark_last_busy(dev); + + return 0; +} +#endif + +static const struct dev_pm_ops stm32_adc_core_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) + SET_RUNTIME_PM_OPS(stm32_adc_core_runtime_suspend, + stm32_adc_core_runtime_resume, + stm32_adc_core_runtime_idle) +}; + +static const struct stm32_adc_priv_cfg stm32f4_adc_priv_cfg = { + .regs = &stm32f4_adc_common_regs, + .clk_sel = stm32f4_adc_clk_sel, + .max_clk_rate_hz = 36000000, + .num_irqs = 1, + .num_adcs = 3, +}; + +static const struct stm32_adc_priv_cfg stm32h7_adc_priv_cfg = { + .regs = &stm32h7_adc_common_regs, + .clk_sel = stm32h7_adc_clk_sel, + .max_clk_rate_hz = 36000000, + .has_syscfg = HAS_VBOOSTER, + .num_irqs = 1, + .num_adcs = 2, +}; + +static const struct stm32_adc_priv_cfg stm32mp1_adc_priv_cfg = { + .regs = &stm32h7_adc_common_regs, + .clk_sel = stm32h7_adc_clk_sel, + .max_clk_rate_hz = 36000000, + .has_syscfg = HAS_VBOOSTER | HAS_ANASWVDD, + .num_irqs = 2, + .num_adcs = 2, +}; + +static const struct of_device_id stm32_adc_of_match[] = { + { + .compatible = "st,stm32f4-adc-core", + .data = (void *)&stm32f4_adc_priv_cfg + }, { + .compatible = "st,stm32h7-adc-core", + .data = (void *)&stm32h7_adc_priv_cfg + }, { + .compatible = "st,stm32mp1-adc-core", + .data = (void *)&stm32mp1_adc_priv_cfg + }, { + }, +}; +MODULE_DEVICE_TABLE(of, stm32_adc_of_match); + +static struct platform_driver stm32_adc_driver = { + .probe = stm32_adc_probe, + .remove = stm32_adc_remove, + .driver = { + .name = "stm32-adc-core", + .of_match_table = stm32_adc_of_match, + .pm = &stm32_adc_core_pm_ops, + }, +}; +module_platform_driver(stm32_adc_driver); + +MODULE_AUTHOR("Fabrice Gasnier "); +MODULE_DESCRIPTION("STMicroelectronics STM32 ADC core driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:stm32-adc-core"); -- cgit v1.2.3