From 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 12:05:51 +0200 Subject: Adding upstream version 5.10.209. Signed-off-by: Daniel Baumann --- drivers/media/i2c/ad9389b.c | 1216 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1216 insertions(+) create mode 100644 drivers/media/i2c/ad9389b.c (limited to 'drivers/media/i2c/ad9389b.c') diff --git a/drivers/media/i2c/ad9389b.c b/drivers/media/i2c/ad9389b.c new file mode 100644 index 000000000..8679a44e6 --- /dev/null +++ b/drivers/media/i2c/ad9389b.c @@ -0,0 +1,1216 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Analog Devices AD9389B/AD9889B video encoder driver + * + * Copyright 2012 Cisco Systems, Inc. and/or its affiliates. All rights reserved. + */ + +/* + * References (c = chapter, p = page): + * REF_01 - Analog Devices, Programming Guide, AD9889B/AD9389B, + * HDMI Transitter, Rev. A, October 2010 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "debug level (0-2)"); + +MODULE_DESCRIPTION("Analog Devices AD9389B/AD9889B video encoder driver"); +MODULE_AUTHOR("Hans Verkuil "); +MODULE_AUTHOR("Martin Bugge "); +MODULE_LICENSE("GPL"); + +#define MASK_AD9389B_EDID_RDY_INT 0x04 +#define MASK_AD9389B_MSEN_INT 0x40 +#define MASK_AD9389B_HPD_INT 0x80 + +#define MASK_AD9389B_HPD_DETECT 0x40 +#define MASK_AD9389B_MSEN_DETECT 0x20 +#define MASK_AD9389B_EDID_RDY 0x10 + +#define EDID_MAX_RETRIES (8) +#define EDID_DELAY 250 +#define EDID_MAX_SEGM 8 + +/* +********************************************************************** +* +* Arrays with configuration parameters for the AD9389B +* +********************************************************************** +*/ + +struct ad9389b_state_edid { + /* total number of blocks */ + u32 blocks; + /* Number of segments read */ + u32 segments; + u8 data[EDID_MAX_SEGM * 256]; + /* Number of EDID read retries left */ + unsigned read_retries; +}; + +struct ad9389b_state { + struct ad9389b_platform_data pdata; + struct v4l2_subdev sd; + struct media_pad pad; + struct v4l2_ctrl_handler hdl; + int chip_revision; + /* Is the ad9389b powered on? */ + bool power_on; + /* Did we receive hotplug and rx-sense signals? */ + bool have_monitor; + /* timings from s_dv_timings */ + struct v4l2_dv_timings dv_timings; + /* controls */ + struct v4l2_ctrl *hdmi_mode_ctrl; + struct v4l2_ctrl *hotplug_ctrl; + struct v4l2_ctrl *rx_sense_ctrl; + struct v4l2_ctrl *have_edid0_ctrl; + struct v4l2_ctrl *rgb_quantization_range_ctrl; + struct i2c_client *edid_i2c_client; + struct ad9389b_state_edid edid; + /* Running counter of the number of detected EDIDs (for debugging) */ + unsigned edid_detect_counter; + struct delayed_work edid_handler; /* work entry */ +}; + +static void ad9389b_check_monitor_present_status(struct v4l2_subdev *sd); +static bool ad9389b_check_edid_status(struct v4l2_subdev *sd); +static void ad9389b_setup(struct v4l2_subdev *sd); +static int ad9389b_s_i2s_clock_freq(struct v4l2_subdev *sd, u32 freq); +static int ad9389b_s_clock_freq(struct v4l2_subdev *sd, u32 freq); + +static inline struct ad9389b_state *get_ad9389b_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct ad9389b_state, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct ad9389b_state, hdl)->sd; +} + +/* ------------------------ I2C ----------------------------------------------- */ + +static int ad9389b_rd(struct v4l2_subdev *sd, u8 reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_read_byte_data(client, reg); +} + +static int ad9389b_wr(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret; + int i; + + for (i = 0; i < 3; i++) { + ret = i2c_smbus_write_byte_data(client, reg, val); + if (ret == 0) + return 0; + } + v4l2_err(sd, "%s: failed reg 0x%x, val 0x%x\n", __func__, reg, val); + return ret; +} + +/* To set specific bits in the register, a clear-mask is given (to be AND-ed), + and then the value-mask (to be OR-ed). */ +static inline void ad9389b_wr_and_or(struct v4l2_subdev *sd, u8 reg, + u8 clr_mask, u8 val_mask) +{ + ad9389b_wr(sd, reg, (ad9389b_rd(sd, reg) & clr_mask) | val_mask); +} + +static void ad9389b_edid_rd(struct v4l2_subdev *sd, u16 len, u8 *buf) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + int i; + + v4l2_dbg(1, debug, sd, "%s:\n", __func__); + + for (i = 0; i < len; i++) + buf[i] = i2c_smbus_read_byte_data(state->edid_i2c_client, i); +} + +static inline bool ad9389b_have_hotplug(struct v4l2_subdev *sd) +{ + return ad9389b_rd(sd, 0x42) & MASK_AD9389B_HPD_DETECT; +} + +static inline bool ad9389b_have_rx_sense(struct v4l2_subdev *sd) +{ + return ad9389b_rd(sd, 0x42) & MASK_AD9389B_MSEN_DETECT; +} + +static void ad9389b_csc_conversion_mode(struct v4l2_subdev *sd, u8 mode) +{ + ad9389b_wr_and_or(sd, 0x17, 0xe7, (mode & 0x3)<<3); + ad9389b_wr_and_or(sd, 0x18, 0x9f, (mode & 0x3)<<5); +} + +static void ad9389b_csc_coeff(struct v4l2_subdev *sd, + u16 A1, u16 A2, u16 A3, u16 A4, + u16 B1, u16 B2, u16 B3, u16 B4, + u16 C1, u16 C2, u16 C3, u16 C4) +{ + /* A */ + ad9389b_wr_and_or(sd, 0x18, 0xe0, A1>>8); + ad9389b_wr(sd, 0x19, A1); + ad9389b_wr_and_or(sd, 0x1A, 0xe0, A2>>8); + ad9389b_wr(sd, 0x1B, A2); + ad9389b_wr_and_or(sd, 0x1c, 0xe0, A3>>8); + ad9389b_wr(sd, 0x1d, A3); + ad9389b_wr_and_or(sd, 0x1e, 0xe0, A4>>8); + ad9389b_wr(sd, 0x1f, A4); + + /* B */ + ad9389b_wr_and_or(sd, 0x20, 0xe0, B1>>8); + ad9389b_wr(sd, 0x21, B1); + ad9389b_wr_and_or(sd, 0x22, 0xe0, B2>>8); + ad9389b_wr(sd, 0x23, B2); + ad9389b_wr_and_or(sd, 0x24, 0xe0, B3>>8); + ad9389b_wr(sd, 0x25, B3); + ad9389b_wr_and_or(sd, 0x26, 0xe0, B4>>8); + ad9389b_wr(sd, 0x27, B4); + + /* C */ + ad9389b_wr_and_or(sd, 0x28, 0xe0, C1>>8); + ad9389b_wr(sd, 0x29, C1); + ad9389b_wr_and_or(sd, 0x2A, 0xe0, C2>>8); + ad9389b_wr(sd, 0x2B, C2); + ad9389b_wr_and_or(sd, 0x2C, 0xe0, C3>>8); + ad9389b_wr(sd, 0x2D, C3); + ad9389b_wr_and_or(sd, 0x2E, 0xe0, C4>>8); + ad9389b_wr(sd, 0x2F, C4); +} + +static void ad9389b_csc_rgb_full2limit(struct v4l2_subdev *sd, bool enable) +{ + if (enable) { + u8 csc_mode = 0; + + ad9389b_csc_conversion_mode(sd, csc_mode); + ad9389b_csc_coeff(sd, + 4096-564, 0, 0, 256, + 0, 4096-564, 0, 256, + 0, 0, 4096-564, 256); + /* enable CSC */ + ad9389b_wr_and_or(sd, 0x3b, 0xfe, 0x1); + /* AVI infoframe: Limited range RGB (16-235) */ + ad9389b_wr_and_or(sd, 0xcd, 0xf9, 0x02); + } else { + /* disable CSC */ + ad9389b_wr_and_or(sd, 0x3b, 0xfe, 0x0); + /* AVI infoframe: Full range RGB (0-255) */ + ad9389b_wr_and_or(sd, 0xcd, 0xf9, 0x04); + } +} + +static void ad9389b_set_IT_content_AVI_InfoFrame(struct v4l2_subdev *sd) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + + if (state->dv_timings.bt.flags & V4L2_DV_FL_IS_CE_VIDEO) { + /* CE format, not IT */ + ad9389b_wr_and_or(sd, 0xcd, 0xbf, 0x00); + } else { + /* IT format */ + ad9389b_wr_and_or(sd, 0xcd, 0xbf, 0x40); + } +} + +static int ad9389b_set_rgb_quantization_mode(struct v4l2_subdev *sd, struct v4l2_ctrl *ctrl) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + + switch (ctrl->val) { + case V4L2_DV_RGB_RANGE_AUTO: + /* automatic */ + if (state->dv_timings.bt.flags & V4L2_DV_FL_IS_CE_VIDEO) { + /* CE format, RGB limited range (16-235) */ + ad9389b_csc_rgb_full2limit(sd, true); + } else { + /* not CE format, RGB full range (0-255) */ + ad9389b_csc_rgb_full2limit(sd, false); + } + break; + case V4L2_DV_RGB_RANGE_LIMITED: + /* RGB limited range (16-235) */ + ad9389b_csc_rgb_full2limit(sd, true); + break; + case V4L2_DV_RGB_RANGE_FULL: + /* RGB full range (0-255) */ + ad9389b_csc_rgb_full2limit(sd, false); + break; + default: + return -EINVAL; + } + return 0; +} + +static void ad9389b_set_manual_pll_gear(struct v4l2_subdev *sd, u32 pixelclock) +{ + u8 gear; + + /* Workaround for TMDS PLL problem + * The TMDS PLL in AD9389b change gear when the chip is heated above a + * certain temperature. The output is disabled when the PLL change gear + * so the monitor has to lock on the signal again. A workaround for + * this is to use the manual PLL gears. This is a solution from Analog + * Devices that is not documented in the datasheets. + * 0x98 [7] = enable manual gearing. 0x98 [6:4] = gear + * + * The pixel frequency ranges are based on readout of the gear the + * automatic gearing selects for different pixel clocks + * (read from 0x9e [3:1]). + */ + + if (pixelclock > 140000000) + gear = 0xc0; /* 4th gear */ + else if (pixelclock > 117000000) + gear = 0xb0; /* 3rd gear */ + else if (pixelclock > 87000000) + gear = 0xa0; /* 2nd gear */ + else if (pixelclock > 60000000) + gear = 0x90; /* 1st gear */ + else + gear = 0x80; /* 0th gear */ + + ad9389b_wr_and_or(sd, 0x98, 0x0f, gear); +} + +/* ------------------------------ CTRL OPS ------------------------------ */ + +static int ad9389b_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + struct ad9389b_state *state = get_ad9389b_state(sd); + + v4l2_dbg(1, debug, sd, + "%s: ctrl id: %d, ctrl->val %d\n", __func__, ctrl->id, ctrl->val); + + if (state->hdmi_mode_ctrl == ctrl) { + /* Set HDMI or DVI-D */ + ad9389b_wr_and_or(sd, 0xaf, 0xfd, + ctrl->val == V4L2_DV_TX_MODE_HDMI ? 0x02 : 0x00); + return 0; + } + if (state->rgb_quantization_range_ctrl == ctrl) + return ad9389b_set_rgb_quantization_mode(sd, ctrl); + return -EINVAL; +} + +static const struct v4l2_ctrl_ops ad9389b_ctrl_ops = { + .s_ctrl = ad9389b_s_ctrl, +}; + +/* ---------------------------- CORE OPS ------------------------------------------- */ + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int ad9389b_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + reg->val = ad9389b_rd(sd, reg->reg & 0xff); + reg->size = 1; + return 0; +} + +static int ad9389b_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg) +{ + ad9389b_wr(sd, reg->reg & 0xff, reg->val & 0xff); + return 0; +} +#endif + +static int ad9389b_log_status(struct v4l2_subdev *sd) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + struct ad9389b_state_edid *edid = &state->edid; + + static const char * const states[] = { + "in reset", + "reading EDID", + "idle", + "initializing HDCP", + "HDCP enabled", + "initializing HDCP repeater", + "6", "7", "8", "9", "A", "B", "C", "D", "E", "F" + }; + static const char * const errors[] = { + "no error", + "bad receiver BKSV", + "Ri mismatch", + "Pj mismatch", + "i2c error", + "timed out", + "max repeater cascade exceeded", + "hash check failed", + "too many devices", + "9", "A", "B", "C", "D", "E", "F" + }; + + u8 manual_gear; + + v4l2_info(sd, "chip revision %d\n", state->chip_revision); + v4l2_info(sd, "power %s\n", state->power_on ? "on" : "off"); + v4l2_info(sd, "%s hotplug, %s Rx Sense, %s EDID (%d block(s))\n", + (ad9389b_rd(sd, 0x42) & MASK_AD9389B_HPD_DETECT) ? + "detected" : "no", + (ad9389b_rd(sd, 0x42) & MASK_AD9389B_MSEN_DETECT) ? + "detected" : "no", + edid->segments ? "found" : "no", edid->blocks); + v4l2_info(sd, "%s output %s\n", + (ad9389b_rd(sd, 0xaf) & 0x02) ? + "HDMI" : "DVI-D", + (ad9389b_rd(sd, 0xa1) & 0x3c) ? + "disabled" : "enabled"); + v4l2_info(sd, "ad9389b: %s\n", (ad9389b_rd(sd, 0xb8) & 0x40) ? + "encrypted" : "no encryption"); + v4l2_info(sd, "state: %s, error: %s, detect count: %u, msk/irq: %02x/%02x\n", + states[ad9389b_rd(sd, 0xc8) & 0xf], + errors[ad9389b_rd(sd, 0xc8) >> 4], + state->edid_detect_counter, + ad9389b_rd(sd, 0x94), ad9389b_rd(sd, 0x96)); + manual_gear = ad9389b_rd(sd, 0x98) & 0x80; + v4l2_info(sd, "ad9389b: RGB quantization: %s range\n", + ad9389b_rd(sd, 0x3b) & 0x01 ? "limited" : "full"); + v4l2_info(sd, "ad9389b: %s gear %d\n", + manual_gear ? "manual" : "automatic", + manual_gear ? ((ad9389b_rd(sd, 0x98) & 0x70) >> 4) : + ((ad9389b_rd(sd, 0x9e) & 0x0e) >> 1)); + if (ad9389b_rd(sd, 0xaf) & 0x02) { + /* HDMI only */ + u8 manual_cts = ad9389b_rd(sd, 0x0a) & 0x80; + u32 N = (ad9389b_rd(sd, 0x01) & 0xf) << 16 | + ad9389b_rd(sd, 0x02) << 8 | + ad9389b_rd(sd, 0x03); + u8 vic_detect = ad9389b_rd(sd, 0x3e) >> 2; + u8 vic_sent = ad9389b_rd(sd, 0x3d) & 0x3f; + u32 CTS; + + if (manual_cts) + CTS = (ad9389b_rd(sd, 0x07) & 0xf) << 16 | + ad9389b_rd(sd, 0x08) << 8 | + ad9389b_rd(sd, 0x09); + else + CTS = (ad9389b_rd(sd, 0x04) & 0xf) << 16 | + ad9389b_rd(sd, 0x05) << 8 | + ad9389b_rd(sd, 0x06); + N = (ad9389b_rd(sd, 0x01) & 0xf) << 16 | + ad9389b_rd(sd, 0x02) << 8 | + ad9389b_rd(sd, 0x03); + + v4l2_info(sd, "ad9389b: CTS %s mode: N %d, CTS %d\n", + manual_cts ? "manual" : "automatic", N, CTS); + + v4l2_info(sd, "ad9389b: VIC: detected %d, sent %d\n", + vic_detect, vic_sent); + } + if (state->dv_timings.type == V4L2_DV_BT_656_1120) + v4l2_print_dv_timings(sd->name, "timings: ", + &state->dv_timings, false); + else + v4l2_info(sd, "no timings set\n"); + return 0; +} + +/* Power up/down ad9389b */ +static int ad9389b_s_power(struct v4l2_subdev *sd, int on) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + struct ad9389b_platform_data *pdata = &state->pdata; + const int retries = 20; + int i; + + v4l2_dbg(1, debug, sd, "%s: power %s\n", __func__, on ? "on" : "off"); + + state->power_on = on; + + if (!on) { + /* Power down */ + ad9389b_wr_and_or(sd, 0x41, 0xbf, 0x40); + return true; + } + + /* Power up */ + /* The ad9389b does not always come up immediately. + Retry multiple times. */ + for (i = 0; i < retries; i++) { + ad9389b_wr_and_or(sd, 0x41, 0xbf, 0x0); + if ((ad9389b_rd(sd, 0x41) & 0x40) == 0) + break; + ad9389b_wr_and_or(sd, 0x41, 0xbf, 0x40); + msleep(10); + } + if (i == retries) { + v4l2_dbg(1, debug, sd, "failed to powerup the ad9389b\n"); + ad9389b_s_power(sd, 0); + return false; + } + if (i > 1) + v4l2_dbg(1, debug, sd, + "needed %d retries to powerup the ad9389b\n", i); + + /* Select chip: AD9389B */ + ad9389b_wr_and_or(sd, 0xba, 0xef, 0x10); + + /* Reserved registers that must be set according to REF_01 p. 11*/ + ad9389b_wr_and_or(sd, 0x98, 0xf0, 0x07); + ad9389b_wr(sd, 0x9c, 0x38); + ad9389b_wr_and_or(sd, 0x9d, 0xfc, 0x01); + + /* Differential output drive strength */ + if (pdata->diff_data_drive_strength > 0) + ad9389b_wr(sd, 0xa2, pdata->diff_data_drive_strength); + else + ad9389b_wr(sd, 0xa2, 0x87); + + if (pdata->diff_clk_drive_strength > 0) + ad9389b_wr(sd, 0xa3, pdata->diff_clk_drive_strength); + else + ad9389b_wr(sd, 0xa3, 0x87); + + ad9389b_wr(sd, 0x0a, 0x01); + ad9389b_wr(sd, 0xbb, 0xff); + + /* Set number of attempts to read the EDID */ + ad9389b_wr(sd, 0xc9, 0xf); + return true; +} + +/* Enable interrupts */ +static void ad9389b_set_isr(struct v4l2_subdev *sd, bool enable) +{ + u8 irqs = MASK_AD9389B_HPD_INT | MASK_AD9389B_MSEN_INT; + u8 irqs_rd; + int retries = 100; + + /* The datasheet says that the EDID ready interrupt should be + disabled if there is no hotplug. */ + if (!enable) + irqs = 0; + else if (ad9389b_have_hotplug(sd)) + irqs |= MASK_AD9389B_EDID_RDY_INT; + + /* + * This i2c write can fail (approx. 1 in 1000 writes). But it + * is essential that this register is correct, so retry it + * multiple times. + * + * Note that the i2c write does not report an error, but the readback + * clearly shows the wrong value. + */ + do { + ad9389b_wr(sd, 0x94, irqs); + irqs_rd = ad9389b_rd(sd, 0x94); + } while (retries-- && irqs_rd != irqs); + + if (irqs_rd != irqs) + v4l2_err(sd, "Could not set interrupts: hw failure?\n"); +} + +/* Interrupt handler */ +static int ad9389b_isr(struct v4l2_subdev *sd, u32 status, bool *handled) +{ + u8 irq_status; + + /* disable interrupts to prevent a race condition */ + ad9389b_set_isr(sd, false); + irq_status = ad9389b_rd(sd, 0x96); + /* clear detected interrupts */ + ad9389b_wr(sd, 0x96, irq_status); + /* enable interrupts */ + ad9389b_set_isr(sd, true); + + v4l2_dbg(1, debug, sd, "%s: irq_status 0x%x\n", __func__, irq_status); + + if (irq_status & (MASK_AD9389B_HPD_INT)) + ad9389b_check_monitor_present_status(sd); + if (irq_status & MASK_AD9389B_EDID_RDY_INT) + ad9389b_check_edid_status(sd); + + *handled = true; + return 0; +} + +static const struct v4l2_subdev_core_ops ad9389b_core_ops = { + .log_status = ad9389b_log_status, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = ad9389b_g_register, + .s_register = ad9389b_s_register, +#endif + .s_power = ad9389b_s_power, + .interrupt_service_routine = ad9389b_isr, +}; + +/* ------------------------------ VIDEO OPS ------------------------------ */ + +/* Enable/disable ad9389b output */ +static int ad9389b_s_stream(struct v4l2_subdev *sd, int enable) +{ + v4l2_dbg(1, debug, sd, "%s: %sable\n", __func__, (enable ? "en" : "dis")); + + ad9389b_wr_and_or(sd, 0xa1, ~0x3c, (enable ? 0 : 0x3c)); + if (enable) { + ad9389b_check_monitor_present_status(sd); + } else { + ad9389b_s_power(sd, 0); + } + return 0; +} + +static const struct v4l2_dv_timings_cap ad9389b_timings_cap = { + .type = V4L2_DV_BT_656_1120, + /* keep this initialization for compatibility with GCC < 4.4.6 */ + .reserved = { 0 }, + V4L2_INIT_BT_TIMINGS(640, 1920, 350, 1200, 25000000, 170000000, + V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT | + V4L2_DV_BT_STD_GTF | V4L2_DV_BT_STD_CVT, + V4L2_DV_BT_CAP_PROGRESSIVE | V4L2_DV_BT_CAP_REDUCED_BLANKING | + V4L2_DV_BT_CAP_CUSTOM) +}; + +static int ad9389b_s_dv_timings(struct v4l2_subdev *sd, + struct v4l2_dv_timings *timings) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + + v4l2_dbg(1, debug, sd, "%s:\n", __func__); + + /* quick sanity check */ + if (!v4l2_valid_dv_timings(timings, &ad9389b_timings_cap, NULL, NULL)) + return -EINVAL; + + /* Fill the optional fields .standards and .flags in struct v4l2_dv_timings + if the format is one of the CEA or DMT timings. */ + v4l2_find_dv_timings_cap(timings, &ad9389b_timings_cap, 0, NULL, NULL); + + timings->bt.flags &= ~V4L2_DV_FL_REDUCED_FPS; + + /* save timings */ + state->dv_timings = *timings; + + /* update quantization range based on new dv_timings */ + ad9389b_set_rgb_quantization_mode(sd, state->rgb_quantization_range_ctrl); + + /* update PLL gear based on new dv_timings */ + if (state->pdata.tmds_pll_gear == AD9389B_TMDS_PLL_GEAR_SEMI_AUTOMATIC) + ad9389b_set_manual_pll_gear(sd, (u32)timings->bt.pixelclock); + + /* update AVI infoframe */ + ad9389b_set_IT_content_AVI_InfoFrame(sd); + + return 0; +} + +static int ad9389b_g_dv_timings(struct v4l2_subdev *sd, + struct v4l2_dv_timings *timings) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + + v4l2_dbg(1, debug, sd, "%s:\n", __func__); + + if (!timings) + return -EINVAL; + + *timings = state->dv_timings; + + return 0; +} + +static int ad9389b_enum_dv_timings(struct v4l2_subdev *sd, + struct v4l2_enum_dv_timings *timings) +{ + if (timings->pad != 0) + return -EINVAL; + + return v4l2_enum_dv_timings_cap(timings, &ad9389b_timings_cap, + NULL, NULL); +} + +static int ad9389b_dv_timings_cap(struct v4l2_subdev *sd, + struct v4l2_dv_timings_cap *cap) +{ + if (cap->pad != 0) + return -EINVAL; + + *cap = ad9389b_timings_cap; + return 0; +} + +static const struct v4l2_subdev_video_ops ad9389b_video_ops = { + .s_stream = ad9389b_s_stream, + .s_dv_timings = ad9389b_s_dv_timings, + .g_dv_timings = ad9389b_g_dv_timings, +}; + +/* ------------------------------ PAD OPS ------------------------------ */ + +static int ad9389b_get_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + + if (edid->pad != 0) + return -EINVAL; + if (edid->blocks == 0 || edid->blocks > 256) + return -EINVAL; + if (!state->edid.segments) { + v4l2_dbg(1, debug, sd, "EDID segment 0 not found\n"); + return -ENODATA; + } + if (edid->start_block >= state->edid.segments * 2) + return -E2BIG; + if (edid->blocks + edid->start_block >= state->edid.segments * 2) + edid->blocks = state->edid.segments * 2 - edid->start_block; + memcpy(edid->edid, &state->edid.data[edid->start_block * 128], + 128 * edid->blocks); + return 0; +} + +static const struct v4l2_subdev_pad_ops ad9389b_pad_ops = { + .get_edid = ad9389b_get_edid, + .enum_dv_timings = ad9389b_enum_dv_timings, + .dv_timings_cap = ad9389b_dv_timings_cap, +}; + +/* ------------------------------ AUDIO OPS ------------------------------ */ + +static int ad9389b_s_audio_stream(struct v4l2_subdev *sd, int enable) +{ + v4l2_dbg(1, debug, sd, "%s: %sable\n", __func__, (enable ? "en" : "dis")); + + if (enable) + ad9389b_wr_and_or(sd, 0x45, 0x3f, 0x80); + else + ad9389b_wr_and_or(sd, 0x45, 0x3f, 0x40); + + return 0; +} + +static int ad9389b_s_clock_freq(struct v4l2_subdev *sd, u32 freq) +{ + u32 N; + + switch (freq) { + case 32000: N = 4096; break; + case 44100: N = 6272; break; + case 48000: N = 6144; break; + case 88200: N = 12544; break; + case 96000: N = 12288; break; + case 176400: N = 25088; break; + case 192000: N = 24576; break; + default: + return -EINVAL; + } + + /* Set N (used with CTS to regenerate the audio clock) */ + ad9389b_wr(sd, 0x01, (N >> 16) & 0xf); + ad9389b_wr(sd, 0x02, (N >> 8) & 0xff); + ad9389b_wr(sd, 0x03, N & 0xff); + + return 0; +} + +static int ad9389b_s_i2s_clock_freq(struct v4l2_subdev *sd, u32 freq) +{ + u32 i2s_sf; + + switch (freq) { + case 32000: i2s_sf = 0x30; break; + case 44100: i2s_sf = 0x00; break; + case 48000: i2s_sf = 0x20; break; + case 88200: i2s_sf = 0x80; break; + case 96000: i2s_sf = 0xa0; break; + case 176400: i2s_sf = 0xc0; break; + case 192000: i2s_sf = 0xe0; break; + default: + return -EINVAL; + } + + /* Set sampling frequency for I2S audio to 48 kHz */ + ad9389b_wr_and_or(sd, 0x15, 0xf, i2s_sf); + + return 0; +} + +static int ad9389b_s_routing(struct v4l2_subdev *sd, u32 input, u32 output, u32 config) +{ + /* TODO based on input/output/config */ + /* TODO See datasheet "Programmers guide" p. 39-40 */ + + /* Only 2 channels in use for application */ + ad9389b_wr_and_or(sd, 0x50, 0x1f, 0x20); + /* Speaker mapping */ + ad9389b_wr(sd, 0x51, 0x00); + + /* TODO Where should this be placed? */ + /* 16 bit audio word length */ + ad9389b_wr_and_or(sd, 0x14, 0xf0, 0x02); + + return 0; +} + +static const struct v4l2_subdev_audio_ops ad9389b_audio_ops = { + .s_stream = ad9389b_s_audio_stream, + .s_clock_freq = ad9389b_s_clock_freq, + .s_i2s_clock_freq = ad9389b_s_i2s_clock_freq, + .s_routing = ad9389b_s_routing, +}; + +/* --------------------- SUBDEV OPS --------------------------------------- */ + +static const struct v4l2_subdev_ops ad9389b_ops = { + .core = &ad9389b_core_ops, + .video = &ad9389b_video_ops, + .audio = &ad9389b_audio_ops, + .pad = &ad9389b_pad_ops, +}; + +/* ----------------------------------------------------------------------- */ +static void ad9389b_dbg_dump_edid(int lvl, int debug, struct v4l2_subdev *sd, + int segment, u8 *buf) +{ + int i, j; + + if (debug < lvl) + return; + + v4l2_dbg(lvl, debug, sd, "edid segment %d\n", segment); + for (i = 0; i < 256; i += 16) { + u8 b[128]; + u8 *bp = b; + + if (i == 128) + v4l2_dbg(lvl, debug, sd, "\n"); + for (j = i; j < i + 16; j++) { + sprintf(bp, "0x%02x, ", buf[j]); + bp += 6; + } + bp[0] = '\0'; + v4l2_dbg(lvl, debug, sd, "%s\n", b); + } +} + +static void ad9389b_edid_handler(struct work_struct *work) +{ + struct delayed_work *dwork = to_delayed_work(work); + struct ad9389b_state *state = + container_of(dwork, struct ad9389b_state, edid_handler); + struct v4l2_subdev *sd = &state->sd; + struct ad9389b_edid_detect ed; + + v4l2_dbg(1, debug, sd, "%s:\n", __func__); + + if (ad9389b_check_edid_status(sd)) { + /* Return if we received the EDID. */ + return; + } + + if (ad9389b_have_hotplug(sd)) { + /* We must retry reading the EDID several times, it is possible + * that initially the EDID couldn't be read due to i2c errors + * (DVI connectors are particularly prone to this problem). */ + if (state->edid.read_retries) { + state->edid.read_retries--; + v4l2_dbg(1, debug, sd, "%s: edid read failed\n", __func__); + ad9389b_s_power(sd, false); + ad9389b_s_power(sd, true); + schedule_delayed_work(&state->edid_handler, EDID_DELAY); + return; + } + } + + /* We failed to read the EDID, so send an event for this. */ + ed.present = false; + ed.segment = ad9389b_rd(sd, 0xc4); + v4l2_subdev_notify(sd, AD9389B_EDID_DETECT, (void *)&ed); + v4l2_dbg(1, debug, sd, "%s: no edid found\n", __func__); +} + +static void ad9389b_audio_setup(struct v4l2_subdev *sd) +{ + v4l2_dbg(1, debug, sd, "%s\n", __func__); + + ad9389b_s_i2s_clock_freq(sd, 48000); + ad9389b_s_clock_freq(sd, 48000); + ad9389b_s_routing(sd, 0, 0, 0); +} + +/* Initial setup of AD9389b */ + +/* Configure hdmi transmitter. */ +static void ad9389b_setup(struct v4l2_subdev *sd) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + + v4l2_dbg(1, debug, sd, "%s\n", __func__); + + /* Input format: RGB 4:4:4 */ + ad9389b_wr_and_or(sd, 0x15, 0xf1, 0x0); + /* Output format: RGB 4:4:4 */ + ad9389b_wr_and_or(sd, 0x16, 0x3f, 0x0); + /* 1st order interpolation 4:2:2 -> 4:4:4 up conversion, + Aspect ratio: 16:9 */ + ad9389b_wr_and_or(sd, 0x17, 0xf9, 0x06); + /* Output format: RGB 4:4:4, Active Format Information is valid. */ + ad9389b_wr_and_or(sd, 0x45, 0xc7, 0x08); + /* Underscanned */ + ad9389b_wr_and_or(sd, 0x46, 0x3f, 0x80); + /* Setup video format */ + ad9389b_wr(sd, 0x3c, 0x0); + /* Active format aspect ratio: same as picure. */ + ad9389b_wr(sd, 0x47, 0x80); + /* No encryption */ + ad9389b_wr_and_or(sd, 0xaf, 0xef, 0x0); + /* Positive clk edge capture for input video clock */ + ad9389b_wr_and_or(sd, 0xba, 0x1f, 0x60); + + ad9389b_audio_setup(sd); + + v4l2_ctrl_handler_setup(&state->hdl); + + ad9389b_set_IT_content_AVI_InfoFrame(sd); +} + +static void ad9389b_notify_monitor_detect(struct v4l2_subdev *sd) +{ + struct ad9389b_monitor_detect mdt; + struct ad9389b_state *state = get_ad9389b_state(sd); + + mdt.present = state->have_monitor; + v4l2_subdev_notify(sd, AD9389B_MONITOR_DETECT, (void *)&mdt); +} + +static void ad9389b_update_monitor_present_status(struct v4l2_subdev *sd) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + /* read hotplug and rx-sense state */ + u8 status = ad9389b_rd(sd, 0x42); + + v4l2_dbg(1, debug, sd, "%s: status: 0x%x%s%s\n", + __func__, + status, + status & MASK_AD9389B_HPD_DETECT ? ", hotplug" : "", + status & MASK_AD9389B_MSEN_DETECT ? ", rx-sense" : ""); + + if (status & MASK_AD9389B_HPD_DETECT) { + v4l2_dbg(1, debug, sd, "%s: hotplug detected\n", __func__); + state->have_monitor = true; + if (!ad9389b_s_power(sd, true)) { + v4l2_dbg(1, debug, sd, + "%s: monitor detected, powerup failed\n", __func__); + return; + } + ad9389b_setup(sd); + ad9389b_notify_monitor_detect(sd); + state->edid.read_retries = EDID_MAX_RETRIES; + schedule_delayed_work(&state->edid_handler, EDID_DELAY); + } else if (!(status & MASK_AD9389B_HPD_DETECT)) { + v4l2_dbg(1, debug, sd, "%s: hotplug not detected\n", __func__); + state->have_monitor = false; + ad9389b_notify_monitor_detect(sd); + ad9389b_s_power(sd, false); + memset(&state->edid, 0, sizeof(struct ad9389b_state_edid)); + } + + /* update read only ctrls */ + v4l2_ctrl_s_ctrl(state->hotplug_ctrl, ad9389b_have_hotplug(sd) ? 0x1 : 0x0); + v4l2_ctrl_s_ctrl(state->rx_sense_ctrl, ad9389b_have_rx_sense(sd) ? 0x1 : 0x0); + v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, state->edid.segments ? 0x1 : 0x0); + + /* update with setting from ctrls */ + ad9389b_s_ctrl(state->rgb_quantization_range_ctrl); + ad9389b_s_ctrl(state->hdmi_mode_ctrl); +} + +static void ad9389b_check_monitor_present_status(struct v4l2_subdev *sd) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + int retry = 0; + + ad9389b_update_monitor_present_status(sd); + + /* + * Rapid toggling of the hotplug may leave the chip powered off, + * even if we think it is on. In that case reset and power up again. + */ + while (state->power_on && (ad9389b_rd(sd, 0x41) & 0x40)) { + if (++retry > 5) { + v4l2_err(sd, "retried %d times, give up\n", retry); + return; + } + v4l2_dbg(1, debug, sd, "%s: reset and re-check status (%d)\n", __func__, retry); + ad9389b_notify_monitor_detect(sd); + cancel_delayed_work_sync(&state->edid_handler); + memset(&state->edid, 0, sizeof(struct ad9389b_state_edid)); + ad9389b_s_power(sd, false); + ad9389b_update_monitor_present_status(sd); + } +} + +static bool edid_block_verify_crc(u8 *edid_block) +{ + u8 sum = 0; + int i; + + for (i = 0; i < 128; i++) + sum += edid_block[i]; + return sum == 0; +} + +static bool edid_verify_crc(struct v4l2_subdev *sd, u32 segment) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + u32 blocks = state->edid.blocks; + u8 *data = state->edid.data; + + if (edid_block_verify_crc(&data[segment * 256])) { + if ((segment + 1) * 2 <= blocks) + return edid_block_verify_crc(&data[segment * 256 + 128]); + return true; + } + return false; +} + +static bool edid_verify_header(struct v4l2_subdev *sd, u32 segment) +{ + static const u8 hdmi_header[] = { + 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00 + }; + struct ad9389b_state *state = get_ad9389b_state(sd); + u8 *data = state->edid.data; + int i; + + if (segment) + return true; + + for (i = 0; i < ARRAY_SIZE(hdmi_header); i++) + if (data[i] != hdmi_header[i]) + return false; + + return true; +} + +static bool ad9389b_check_edid_status(struct v4l2_subdev *sd) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + struct ad9389b_edid_detect ed; + int segment; + u8 edidRdy = ad9389b_rd(sd, 0xc5); + + v4l2_dbg(1, debug, sd, "%s: edid ready (retries: %d)\n", + __func__, EDID_MAX_RETRIES - state->edid.read_retries); + + if (!(edidRdy & MASK_AD9389B_EDID_RDY)) + return false; + + segment = ad9389b_rd(sd, 0xc4); + if (segment >= EDID_MAX_SEGM) { + v4l2_err(sd, "edid segment number too big\n"); + return false; + } + v4l2_dbg(1, debug, sd, "%s: got segment %d\n", __func__, segment); + ad9389b_edid_rd(sd, 256, &state->edid.data[segment * 256]); + ad9389b_dbg_dump_edid(2, debug, sd, segment, + &state->edid.data[segment * 256]); + if (segment == 0) { + state->edid.blocks = state->edid.data[0x7e] + 1; + v4l2_dbg(1, debug, sd, "%s: %d blocks in total\n", + __func__, state->edid.blocks); + } + if (!edid_verify_crc(sd, segment) || + !edid_verify_header(sd, segment)) { + /* edid crc error, force reread of edid segment */ + v4l2_err(sd, "%s: edid crc or header error\n", __func__); + ad9389b_s_power(sd, false); + ad9389b_s_power(sd, true); + return false; + } + /* one more segment read ok */ + state->edid.segments = segment + 1; + if (((state->edid.data[0x7e] >> 1) + 1) > state->edid.segments) { + /* Request next EDID segment */ + v4l2_dbg(1, debug, sd, "%s: request segment %d\n", + __func__, state->edid.segments); + ad9389b_wr(sd, 0xc9, 0xf); + ad9389b_wr(sd, 0xc4, state->edid.segments); + state->edid.read_retries = EDID_MAX_RETRIES; + schedule_delayed_work(&state->edid_handler, EDID_DELAY); + return false; + } + + /* report when we have all segments but report only for segment 0 */ + ed.present = true; + ed.segment = 0; + v4l2_subdev_notify(sd, AD9389B_EDID_DETECT, (void *)&ed); + state->edid_detect_counter++; + v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, state->edid.segments ? 0x1 : 0x0); + return ed.present; +} + +/* ----------------------------------------------------------------------- */ + +static void ad9389b_init_setup(struct v4l2_subdev *sd) +{ + struct ad9389b_state *state = get_ad9389b_state(sd); + struct ad9389b_state_edid *edid = &state->edid; + + v4l2_dbg(1, debug, sd, "%s\n", __func__); + + /* clear all interrupts */ + ad9389b_wr(sd, 0x96, 0xff); + + memset(edid, 0, sizeof(struct ad9389b_state_edid)); + state->have_monitor = false; + ad9389b_set_isr(sd, false); +} + +static int ad9389b_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + const struct v4l2_dv_timings dv1080p60 = V4L2_DV_BT_CEA_1920X1080P60; + struct ad9389b_state *state; + struct ad9389b_platform_data *pdata = client->dev.platform_data; + struct v4l2_ctrl_handler *hdl; + struct v4l2_subdev *sd; + int err = -EIO; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + v4l_dbg(1, debug, client, "detecting ad9389b client on address 0x%x\n", + client->addr << 1); + + state = devm_kzalloc(&client->dev, sizeof(*state), GFP_KERNEL); + if (!state) + return -ENOMEM; + + /* Platform data */ + if (pdata == NULL) { + v4l_err(client, "No platform data!\n"); + return -ENODEV; + } + memcpy(&state->pdata, pdata, sizeof(state->pdata)); + + sd = &state->sd; + v4l2_i2c_subdev_init(sd, client, &ad9389b_ops); + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + hdl = &state->hdl; + v4l2_ctrl_handler_init(hdl, 5); + + state->hdmi_mode_ctrl = v4l2_ctrl_new_std_menu(hdl, &ad9389b_ctrl_ops, + V4L2_CID_DV_TX_MODE, V4L2_DV_TX_MODE_HDMI, + 0, V4L2_DV_TX_MODE_DVI_D); + state->hotplug_ctrl = v4l2_ctrl_new_std(hdl, NULL, + V4L2_CID_DV_TX_HOTPLUG, 0, 1, 0, 0); + state->rx_sense_ctrl = v4l2_ctrl_new_std(hdl, NULL, + V4L2_CID_DV_TX_RXSENSE, 0, 1, 0, 0); + state->have_edid0_ctrl = v4l2_ctrl_new_std(hdl, NULL, + V4L2_CID_DV_TX_EDID_PRESENT, 0, 1, 0, 0); + state->rgb_quantization_range_ctrl = + v4l2_ctrl_new_std_menu(hdl, &ad9389b_ctrl_ops, + V4L2_CID_DV_TX_RGB_RANGE, V4L2_DV_RGB_RANGE_FULL, + 0, V4L2_DV_RGB_RANGE_AUTO); + sd->ctrl_handler = hdl; + if (hdl->error) { + err = hdl->error; + + goto err_hdl; + } + state->pad.flags = MEDIA_PAD_FL_SINK; + sd->entity.function = MEDIA_ENT_F_DV_ENCODER; + err = media_entity_pads_init(&sd->entity, 1, &state->pad); + if (err) + goto err_hdl; + + state->chip_revision = ad9389b_rd(sd, 0x0); + if (state->chip_revision != 2) { + v4l2_err(sd, "chip_revision %d != 2\n", state->chip_revision); + err = -EIO; + goto err_entity; + } + v4l2_dbg(1, debug, sd, "reg 0x41 0x%x, chip version (reg 0x00) 0x%x\n", + ad9389b_rd(sd, 0x41), state->chip_revision); + + state->edid_i2c_client = i2c_new_dummy_device(client->adapter, (0x7e >> 1)); + if (IS_ERR(state->edid_i2c_client)) { + v4l2_err(sd, "failed to register edid i2c client\n"); + err = PTR_ERR(state->edid_i2c_client); + goto err_entity; + } + + INIT_DELAYED_WORK(&state->edid_handler, ad9389b_edid_handler); + state->dv_timings = dv1080p60; + + ad9389b_init_setup(sd); + ad9389b_set_isr(sd, true); + + v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name, + client->addr << 1, client->adapter->name); + return 0; + +err_entity: + media_entity_cleanup(&sd->entity); +err_hdl: + v4l2_ctrl_handler_free(&state->hdl); + return err; +} + +/* ----------------------------------------------------------------------- */ + +static int ad9389b_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct ad9389b_state *state = get_ad9389b_state(sd); + + state->chip_revision = -1; + + v4l2_dbg(1, debug, sd, "%s removed @ 0x%x (%s)\n", client->name, + client->addr << 1, client->adapter->name); + + ad9389b_s_stream(sd, false); + ad9389b_s_audio_stream(sd, false); + ad9389b_init_setup(sd); + cancel_delayed_work_sync(&state->edid_handler); + i2c_unregister_device(state->edid_i2c_client); + v4l2_device_unregister_subdev(sd); + media_entity_cleanup(&sd->entity); + v4l2_ctrl_handler_free(sd->ctrl_handler); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_device_id ad9389b_id[] = { + { "ad9389b", 0 }, + { "ad9889b", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ad9389b_id); + +static struct i2c_driver ad9389b_driver = { + .driver = { + .name = "ad9389b", + }, + .probe = ad9389b_probe, + .remove = ad9389b_remove, + .id_table = ad9389b_id, +}; + +module_i2c_driver(ad9389b_driver); -- cgit v1.2.3