From ef6fed2eb60f1d490dd8c6b7a5ae88c29e77522a Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 3 Jun 2024 21:25:26 +0200 Subject: Merging upstream version 5.10.218. Signed-off-by: Daniel Baumann --- drivers/misc/eeprom/at24.c | 46 +++++++++++++++++++++++++++++++++++-------- drivers/misc/mei/hw-me-regs.h | 2 ++ drivers/misc/mei/pci-me.c | 2 ++ 3 files changed, 42 insertions(+), 8 deletions(-) (limited to 'drivers/misc') diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index 305ffad13..02bea4436 100644 --- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -585,6 +585,31 @@ static unsigned int at24_get_offset_adj(u8 flags, unsigned int byte_len) } } +static void at24_probe_temp_sensor(struct i2c_client *client) +{ + struct at24_data *at24 = i2c_get_clientdata(client); + struct i2c_board_info info = { .type = "jc42" }; + int ret; + u8 val; + + /* + * Byte 2 has value 11 for DDR3, earlier versions don't + * support the thermal sensor present flag + */ + ret = at24_read(at24, 2, &val, 1); + if (ret || val != 11) + return; + + /* Byte 32, bit 7 is set if temp sensor is present */ + ret = at24_read(at24, 32, &val, 1); + if (ret || !(val & BIT(7))) + return; + + info.addr = 0x18 | (client->addr & 7); + + i2c_new_client_device(client->adapter, &info); +} + static int at24_probe(struct i2c_client *client) { struct regmap_config regmap_config = { }; @@ -757,14 +782,6 @@ static int at24_probe(struct i2c_client *client) pm_runtime_set_active(dev); pm_runtime_enable(dev); - at24->nvmem = devm_nvmem_register(dev, &nvmem_config); - if (IS_ERR(at24->nvmem)) { - pm_runtime_disable(dev); - if (!pm_runtime_status_suspended(dev)) - regulator_disable(at24->vcc_reg); - return PTR_ERR(at24->nvmem); - } - /* * Perform a one-byte test read to verify that the * chip is functional. @@ -777,6 +794,19 @@ static int at24_probe(struct i2c_client *client) return -ENODEV; } + at24->nvmem = devm_nvmem_register(dev, &nvmem_config); + if (IS_ERR(at24->nvmem)) { + pm_runtime_disable(dev); + if (!pm_runtime_status_suspended(dev)) + regulator_disable(at24->vcc_reg); + return dev_err_probe(dev, PTR_ERR(at24->nvmem), + "failed to register nvmem\n"); + } + + /* If this a SPD EEPROM, probe for DDR3 thermal sensor */ + if (cdata == &at24_data_spd) + at24_probe_temp_sensor(client); + pm_runtime_idle(dev); if (writable) diff --git a/drivers/misc/mei/hw-me-regs.h b/drivers/misc/mei/hw-me-regs.h index 28acedb10..129e36ea0 100644 --- a/drivers/misc/mei/hw-me-regs.h +++ b/drivers/misc/mei/hw-me-regs.h @@ -115,6 +115,8 @@ #define MEI_DEV_ID_ARL_S 0x7F68 /* Arrow Lake Point S */ #define MEI_DEV_ID_ARL_H 0x7770 /* Arrow Lake Point H */ +#define MEI_DEV_ID_LNL_M 0xA870 /* Lunar Lake Point M */ + /* * MEI HW Section */ diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c index 2809338a5..188d84766 100644 --- a/drivers/misc/mei/pci-me.c +++ b/drivers/misc/mei/pci-me.c @@ -121,6 +121,8 @@ static const struct pci_device_id mei_me_pci_tbl[] = { {MEI_PCI_DEVICE(MEI_DEV_ID_ARL_S, MEI_ME_PCH15_CFG)}, {MEI_PCI_DEVICE(MEI_DEV_ID_ARL_H, MEI_ME_PCH15_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_LNL_M, MEI_ME_PCH15_CFG)}, + /* required last entry */ {0, } }; -- cgit v1.2.3