From 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 12:05:51 +0200 Subject: Adding upstream version 5.10.209. Signed-off-by: Daniel Baumann --- .../net/ethernet/stmicro/stmmac/dwmac-mediatek.c | 455 +++++++++++++++++++++ 1 file changed, 455 insertions(+) create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c (limited to 'drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c') diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c new file mode 100644 index 000000000..9e4b83832 --- /dev/null +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c @@ -0,0 +1,455 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2018 MediaTek Inc. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "stmmac.h" +#include "stmmac_platform.h" + +/* Peri Configuration register for mt2712 */ +#define PERI_ETH_PHY_INTF_SEL 0x418 +#define PHY_INTF_MII 0 +#define PHY_INTF_RGMII 1 +#define PHY_INTF_RMII 4 +#define RMII_CLK_SRC_RXC BIT(4) +#define RMII_CLK_SRC_INTERNAL BIT(5) + +#define PERI_ETH_DLY 0x428 +#define ETH_DLY_GTXC_INV BIT(6) +#define ETH_DLY_GTXC_ENABLE BIT(5) +#define ETH_DLY_GTXC_STAGES GENMASK(4, 0) +#define ETH_DLY_TXC_INV BIT(20) +#define ETH_DLY_TXC_ENABLE BIT(19) +#define ETH_DLY_TXC_STAGES GENMASK(18, 14) +#define ETH_DLY_RXC_INV BIT(13) +#define ETH_DLY_RXC_ENABLE BIT(12) +#define ETH_DLY_RXC_STAGES GENMASK(11, 7) + +#define PERI_ETH_DLY_FINE 0x800 +#define ETH_RMII_DLY_TX_INV BIT(2) +#define ETH_FINE_DLY_GTXC BIT(1) +#define ETH_FINE_DLY_RXC BIT(0) + +struct mac_delay_struct { + u32 tx_delay; + u32 rx_delay; + bool tx_inv; + bool rx_inv; +}; + +struct mediatek_dwmac_plat_data { + const struct mediatek_dwmac_variant *variant; + struct mac_delay_struct mac_delay; + struct clk_bulk_data *clks; + struct device_node *np; + struct regmap *peri_regmap; + struct device *dev; + phy_interface_t phy_mode; + int num_clks_to_config; + bool rmii_clk_from_mac; + bool rmii_rxc; +}; + +struct mediatek_dwmac_variant { + int (*dwmac_set_phy_interface)(struct mediatek_dwmac_plat_data *plat); + int (*dwmac_set_delay)(struct mediatek_dwmac_plat_data *plat); + + /* clock ids to be requested */ + const char * const *clk_list; + int num_clks; + + u32 dma_bit_mask; + u32 rx_delay_max; + u32 tx_delay_max; +}; + +/* list of clocks required for mac */ +static const char * const mt2712_dwmac_clk_l[] = { + "axi", "apb", "mac_main", "ptp_ref", "rmii_internal" +}; + +static int mt2712_set_interface(struct mediatek_dwmac_plat_data *plat) +{ + int rmii_clk_from_mac = plat->rmii_clk_from_mac ? RMII_CLK_SRC_INTERNAL : 0; + int rmii_rxc = plat->rmii_rxc ? RMII_CLK_SRC_RXC : 0; + u32 intf_val = 0; + + /* The clock labeled as "rmii_internal" in mt2712_dwmac_clk_l is needed + * only in RMII(when MAC provides the reference clock), and useless for + * RGMII/MII/RMII(when PHY provides the reference clock). + * num_clks_to_config indicates the real number of clocks should be + * configured, equals to (plat->variant->num_clks - 1) in default for all the case, + * then +1 for rmii_clk_from_mac case. + */ + plat->num_clks_to_config = plat->variant->num_clks - 1; + + /* select phy interface in top control domain */ + switch (plat->phy_mode) { + case PHY_INTERFACE_MODE_MII: + intf_val |= PHY_INTF_MII; + break; + case PHY_INTERFACE_MODE_RMII: + if (plat->rmii_clk_from_mac) + plat->num_clks_to_config++; + intf_val |= (PHY_INTF_RMII | rmii_rxc | rmii_clk_from_mac); + break; + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_TXID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_ID: + intf_val |= PHY_INTF_RGMII; + break; + default: + dev_err(plat->dev, "phy interface not supported\n"); + return -EINVAL; + } + + regmap_write(plat->peri_regmap, PERI_ETH_PHY_INTF_SEL, intf_val); + + return 0; +} + +static void mt2712_delay_ps2stage(struct mediatek_dwmac_plat_data *plat) +{ + struct mac_delay_struct *mac_delay = &plat->mac_delay; + + switch (plat->phy_mode) { + case PHY_INTERFACE_MODE_MII: + case PHY_INTERFACE_MODE_RMII: + /* 550ps per stage for MII/RMII */ + mac_delay->tx_delay /= 550; + mac_delay->rx_delay /= 550; + break; + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_TXID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_ID: + /* 170ps per stage for RGMII */ + mac_delay->tx_delay /= 170; + mac_delay->rx_delay /= 170; + break; + default: + dev_err(plat->dev, "phy interface not supported\n"); + break; + } +} + +static void mt2712_delay_stage2ps(struct mediatek_dwmac_plat_data *plat) +{ + struct mac_delay_struct *mac_delay = &plat->mac_delay; + + switch (plat->phy_mode) { + case PHY_INTERFACE_MODE_MII: + case PHY_INTERFACE_MODE_RMII: + /* 550ps per stage for MII/RMII */ + mac_delay->tx_delay *= 550; + mac_delay->rx_delay *= 550; + break; + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_TXID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_ID: + /* 170ps per stage for RGMII */ + mac_delay->tx_delay *= 170; + mac_delay->rx_delay *= 170; + break; + default: + dev_err(plat->dev, "phy interface not supported\n"); + break; + } +} + +static int mt2712_set_delay(struct mediatek_dwmac_plat_data *plat) +{ + struct mac_delay_struct *mac_delay = &plat->mac_delay; + u32 delay_val = 0, fine_val = 0; + + mt2712_delay_ps2stage(plat); + + switch (plat->phy_mode) { + case PHY_INTERFACE_MODE_MII: + delay_val |= FIELD_PREP(ETH_DLY_TXC_ENABLE, !!mac_delay->tx_delay); + delay_val |= FIELD_PREP(ETH_DLY_TXC_STAGES, mac_delay->tx_delay); + delay_val |= FIELD_PREP(ETH_DLY_TXC_INV, mac_delay->tx_inv); + + delay_val |= FIELD_PREP(ETH_DLY_RXC_ENABLE, !!mac_delay->rx_delay); + delay_val |= FIELD_PREP(ETH_DLY_RXC_STAGES, mac_delay->rx_delay); + delay_val |= FIELD_PREP(ETH_DLY_RXC_INV, mac_delay->rx_inv); + break; + case PHY_INTERFACE_MODE_RMII: + if (plat->rmii_clk_from_mac) { + /* case 1: mac provides the rmii reference clock, + * and the clock output to TXC pin. + * The egress timing can be adjusted by GTXC delay macro circuit. + * The ingress timing can be adjusted by TXC delay macro circuit. + */ + delay_val |= FIELD_PREP(ETH_DLY_TXC_ENABLE, !!mac_delay->rx_delay); + delay_val |= FIELD_PREP(ETH_DLY_TXC_STAGES, mac_delay->rx_delay); + delay_val |= FIELD_PREP(ETH_DLY_TXC_INV, mac_delay->rx_inv); + + delay_val |= FIELD_PREP(ETH_DLY_GTXC_ENABLE, !!mac_delay->tx_delay); + delay_val |= FIELD_PREP(ETH_DLY_GTXC_STAGES, mac_delay->tx_delay); + delay_val |= FIELD_PREP(ETH_DLY_GTXC_INV, mac_delay->tx_inv); + } else { + /* case 2: the rmii reference clock is from external phy, + * and the property "rmii_rxc" indicates which pin(TXC/RXC) + * the reference clk is connected to. The reference clock is a + * received signal, so rx_delay/rx_inv are used to indicate + * the reference clock timing adjustment + */ + if (plat->rmii_rxc) { + /* the rmii reference clock from outside is connected + * to RXC pin, the reference clock will be adjusted + * by RXC delay macro circuit. + */ + delay_val |= FIELD_PREP(ETH_DLY_RXC_ENABLE, !!mac_delay->rx_delay); + delay_val |= FIELD_PREP(ETH_DLY_RXC_STAGES, mac_delay->rx_delay); + delay_val |= FIELD_PREP(ETH_DLY_RXC_INV, mac_delay->rx_inv); + } else { + /* the rmii reference clock from outside is connected + * to TXC pin, the reference clock will be adjusted + * by TXC delay macro circuit. + */ + delay_val |= FIELD_PREP(ETH_DLY_TXC_ENABLE, !!mac_delay->rx_delay); + delay_val |= FIELD_PREP(ETH_DLY_TXC_STAGES, mac_delay->rx_delay); + delay_val |= FIELD_PREP(ETH_DLY_TXC_INV, mac_delay->rx_inv); + } + /* tx_inv will inverse the tx clock inside mac relateive to + * reference clock from external phy, + * and this bit is located in the same register with fine-tune + */ + if (mac_delay->tx_inv) + fine_val = ETH_RMII_DLY_TX_INV; + } + break; + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_TXID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_ID: + fine_val = ETH_FINE_DLY_GTXC | ETH_FINE_DLY_RXC; + + delay_val |= FIELD_PREP(ETH_DLY_GTXC_ENABLE, !!mac_delay->tx_delay); + delay_val |= FIELD_PREP(ETH_DLY_GTXC_STAGES, mac_delay->tx_delay); + delay_val |= FIELD_PREP(ETH_DLY_GTXC_INV, mac_delay->tx_inv); + + delay_val |= FIELD_PREP(ETH_DLY_RXC_ENABLE, !!mac_delay->rx_delay); + delay_val |= FIELD_PREP(ETH_DLY_RXC_STAGES, mac_delay->rx_delay); + delay_val |= FIELD_PREP(ETH_DLY_RXC_INV, mac_delay->rx_inv); + break; + default: + dev_err(plat->dev, "phy interface not supported\n"); + return -EINVAL; + } + regmap_write(plat->peri_regmap, PERI_ETH_DLY, delay_val); + regmap_write(plat->peri_regmap, PERI_ETH_DLY_FINE, fine_val); + + mt2712_delay_stage2ps(plat); + + return 0; +} + +static const struct mediatek_dwmac_variant mt2712_gmac_variant = { + .dwmac_set_phy_interface = mt2712_set_interface, + .dwmac_set_delay = mt2712_set_delay, + .clk_list = mt2712_dwmac_clk_l, + .num_clks = ARRAY_SIZE(mt2712_dwmac_clk_l), + .dma_bit_mask = 33, + .rx_delay_max = 17600, + .tx_delay_max = 17600, +}; + +static int mediatek_dwmac_config_dt(struct mediatek_dwmac_plat_data *plat) +{ + struct mac_delay_struct *mac_delay = &plat->mac_delay; + u32 tx_delay_ps, rx_delay_ps; + int err; + + plat->peri_regmap = syscon_regmap_lookup_by_phandle(plat->np, "mediatek,pericfg"); + if (IS_ERR(plat->peri_regmap)) { + dev_err(plat->dev, "Failed to get pericfg syscon\n"); + return PTR_ERR(plat->peri_regmap); + } + + err = of_get_phy_mode(plat->np, &plat->phy_mode); + if (err) { + dev_err(plat->dev, "not find phy-mode\n"); + return err; + } + + if (!of_property_read_u32(plat->np, "mediatek,tx-delay-ps", &tx_delay_ps)) { + if (tx_delay_ps < plat->variant->tx_delay_max) { + mac_delay->tx_delay = tx_delay_ps; + } else { + dev_err(plat->dev, "Invalid TX clock delay: %dps\n", tx_delay_ps); + return -EINVAL; + } + } + + if (!of_property_read_u32(plat->np, "mediatek,rx-delay-ps", &rx_delay_ps)) { + if (rx_delay_ps < plat->variant->rx_delay_max) { + mac_delay->rx_delay = rx_delay_ps; + } else { + dev_err(plat->dev, "Invalid RX clock delay: %dps\n", rx_delay_ps); + return -EINVAL; + } + } + + mac_delay->tx_inv = of_property_read_bool(plat->np, "mediatek,txc-inverse"); + mac_delay->rx_inv = of_property_read_bool(plat->np, "mediatek,rxc-inverse"); + plat->rmii_rxc = of_property_read_bool(plat->np, "mediatek,rmii-rxc"); + plat->rmii_clk_from_mac = of_property_read_bool(plat->np, "mediatek,rmii-clk-from-mac"); + + return 0; +} + +static int mediatek_dwmac_clk_init(struct mediatek_dwmac_plat_data *plat) +{ + const struct mediatek_dwmac_variant *variant = plat->variant; + int i, num = variant->num_clks; + + plat->clks = devm_kcalloc(plat->dev, num, sizeof(*plat->clks), GFP_KERNEL); + if (!plat->clks) + return -ENOMEM; + + for (i = 0; i < num; i++) + plat->clks[i].id = variant->clk_list[i]; + + plat->num_clks_to_config = variant->num_clks; + + return devm_clk_bulk_get(plat->dev, num, plat->clks); +} + +static int mediatek_dwmac_init(struct platform_device *pdev, void *priv) +{ + struct mediatek_dwmac_plat_data *plat = priv; + const struct mediatek_dwmac_variant *variant = plat->variant; + int ret; + + ret = dma_set_mask_and_coherent(plat->dev, DMA_BIT_MASK(variant->dma_bit_mask)); + if (ret) { + dev_err(plat->dev, "No suitable DMA available, err = %d\n", ret); + return ret; + } + + ret = variant->dwmac_set_phy_interface(plat); + if (ret) { + dev_err(plat->dev, "failed to set phy interface, err = %d\n", ret); + return ret; + } + + ret = variant->dwmac_set_delay(plat); + if (ret) { + dev_err(plat->dev, "failed to set delay value, err = %d\n", ret); + return ret; + } + + ret = clk_bulk_prepare_enable(plat->num_clks_to_config, plat->clks); + if (ret) { + dev_err(plat->dev, "failed to enable clks, err = %d\n", ret); + return ret; + } + + pm_runtime_enable(&pdev->dev); + pm_runtime_get_sync(&pdev->dev); + + return 0; +} + +static void mediatek_dwmac_exit(struct platform_device *pdev, void *priv) +{ + struct mediatek_dwmac_plat_data *plat = priv; + + clk_bulk_disable_unprepare(plat->num_clks_to_config, plat->clks); + + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); +} + +static int mediatek_dwmac_probe(struct platform_device *pdev) +{ + struct mediatek_dwmac_plat_data *priv_plat; + struct plat_stmmacenet_data *plat_dat; + struct stmmac_resources stmmac_res; + int ret; + + priv_plat = devm_kzalloc(&pdev->dev, sizeof(*priv_plat), GFP_KERNEL); + if (!priv_plat) + return -ENOMEM; + + priv_plat->variant = of_device_get_match_data(&pdev->dev); + if (!priv_plat->variant) { + dev_err(&pdev->dev, "Missing dwmac-mediatek variant\n"); + return -EINVAL; + } + + priv_plat->dev = &pdev->dev; + priv_plat->np = pdev->dev.of_node; + + ret = mediatek_dwmac_config_dt(priv_plat); + if (ret) + return ret; + + ret = mediatek_dwmac_clk_init(priv_plat); + if (ret) + return ret; + + ret = stmmac_get_platform_resources(pdev, &stmmac_res); + if (ret) + return ret; + + plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac); + if (IS_ERR(plat_dat)) + return PTR_ERR(plat_dat); + + plat_dat->interface = priv_plat->phy_mode; + plat_dat->has_gmac4 = 1; + plat_dat->has_gmac = 0; + plat_dat->pmt = 0; + plat_dat->riwt_off = 1; + plat_dat->maxmtu = ETH_DATA_LEN; + plat_dat->bsp_priv = priv_plat; + plat_dat->init = mediatek_dwmac_init; + plat_dat->exit = mediatek_dwmac_exit; + mediatek_dwmac_init(pdev, priv_plat); + + ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res); + if (ret) { + stmmac_remove_config_dt(pdev, plat_dat); + return ret; + } + + return 0; +} + +static const struct of_device_id mediatek_dwmac_match[] = { + { .compatible = "mediatek,mt2712-gmac", + .data = &mt2712_gmac_variant }, + { } +}; + +MODULE_DEVICE_TABLE(of, mediatek_dwmac_match); + +static struct platform_driver mediatek_dwmac_driver = { + .probe = mediatek_dwmac_probe, + .remove = stmmac_pltfr_remove, + .driver = { + .name = "dwmac-mediatek", + .pm = &stmmac_pltfr_pm_ops, + .of_match_table = mediatek_dwmac_match, + }, +}; +module_platform_driver(mediatek_dwmac_driver); + +MODULE_AUTHOR("Biao Huang "); +MODULE_DESCRIPTION("MediaTek DWMAC specific glue layer"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3