From 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 12:05:51 +0200 Subject: Adding upstream version 5.10.209. Signed-off-by: Daniel Baumann --- drivers/power/supply/88pm860x_battery.c | 1016 +++++++++++++++++++++++++++++++ 1 file changed, 1016 insertions(+) create mode 100644 drivers/power/supply/88pm860x_battery.c (limited to 'drivers/power/supply/88pm860x_battery.c') diff --git a/drivers/power/supply/88pm860x_battery.c b/drivers/power/supply/88pm860x_battery.c new file mode 100644 index 000000000..590da88a1 --- /dev/null +++ b/drivers/power/supply/88pm860x_battery.c @@ -0,0 +1,1016 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Battery driver for Marvell 88PM860x PMIC + * + * Copyright (c) 2012 Marvell International Ltd. + * Author: Jett Zhou + * Haojian Zhuang + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* bit definitions of Status Query Interface 2 */ +#define STATUS2_CHG (1 << 2) +#define STATUS2_BAT (1 << 3) +#define STATUS2_VBUS (1 << 4) + +/* bit definitions of Measurement Enable 1 Register */ +#define MEAS1_TINT (1 << 3) +#define MEAS1_GP1 (1 << 5) + +/* bit definitions of Measurement Enable 3 Register */ +#define MEAS3_IBAT (1 << 0) +#define MEAS3_BAT_DET (1 << 1) +#define MEAS3_CC (1 << 2) + +/* bit definitions of Measurement Off Time Register */ +#define MEAS_OFF_SLEEP_EN (1 << 1) + +/* bit definitions of GPADC Bias Current 2 Register */ +#define GPBIAS2_GPADC1_SET (2 << 4) +/* GPADC1 Bias Current value in uA unit */ +#define GPBIAS2_GPADC1_UA ((GPBIAS2_GPADC1_SET >> 4) * 5 + 1) + +/* bit definitions of GPADC Misc 1 Register */ +#define GPMISC1_GPADC_EN (1 << 0) + +/* bit definitions of Charger Control 6 Register */ +#define CC6_BAT_DET_GPADC1 1 + +/* bit definitions of Coulomb Counter Reading Register */ +#define CCNT_AVG_SEL (4 << 3) + +/* bit definitions of RTC miscellaneous Register1 */ +#define RTC_SOC_5LSB (0x1F << 3) + +/* bit definitions of RTC Register1 */ +#define RTC_SOC_3MSB (0x7) + +/* bit definitions of Power up Log register */ +#define BAT_WU_LOG (1<<6) + +/* coulomb counter index */ +#define CCNT_POS1 0 +#define CCNT_POS2 1 +#define CCNT_NEG1 2 +#define CCNT_NEG2 3 +#define CCNT_SPOS 4 +#define CCNT_SNEG 5 + +/* OCV -- Open Circuit Voltage */ +#define OCV_MODE_ACTIVE 0 +#define OCV_MODE_SLEEP 1 + +/* Vbat range of CC for measuring Rbat */ +#define LOW_BAT_THRESHOLD 3600 +#define VBATT_RESISTOR_MIN 3800 +#define VBATT_RESISTOR_MAX 4100 + +/* TBAT for batt, TINT for chip itself */ +#define PM860X_TEMP_TINT (0) +#define PM860X_TEMP_TBAT (1) + +/* + * Battery temperature based on NTC resistor, defined + * corresponding resistor value -- Ohm / C degeree. + */ +#define TBAT_NEG_25D 127773 /* -25 */ +#define TBAT_NEG_10D 54564 /* -10 */ +#define TBAT_0D 32330 /* 0 */ +#define TBAT_10D 19785 /* 10 */ +#define TBAT_20D 12468 /* 20 */ +#define TBAT_30D 8072 /* 30 */ +#define TBAT_40D 5356 /* 40 */ + +struct pm860x_battery_info { + struct pm860x_chip *chip; + struct i2c_client *i2c; + struct device *dev; + + struct power_supply *battery; + struct mutex lock; + int status; + int irq_cc; + int irq_batt; + int max_capacity; + int resistor; /* Battery Internal Resistor */ + int last_capacity; + int start_soc; + unsigned present:1; + unsigned temp_type:1; /* TINT or TBAT */ +}; + +struct ccnt { + unsigned long long int pos; + unsigned long long int neg; + unsigned int spos; + unsigned int sneg; + + int total_chg; /* mAh(3.6C) */ + int total_dischg; /* mAh(3.6C) */ +}; + +/* + * State of Charge. + * The first number is mAh(=3.6C), and the second number is percent point. + */ +static int array_soc[][2] = { + {4170, 100}, {4154, 99}, {4136, 98}, {4122, 97}, {4107, 96}, + {4102, 95}, {4088, 94}, {4081, 93}, {4070, 92}, {4060, 91}, + {4053, 90}, {4044, 89}, {4035, 88}, {4028, 87}, {4019, 86}, + {4013, 85}, {4006, 84}, {3995, 83}, {3987, 82}, {3982, 81}, + {3976, 80}, {3968, 79}, {3962, 78}, {3954, 77}, {3946, 76}, + {3941, 75}, {3934, 74}, {3929, 73}, {3922, 72}, {3916, 71}, + {3910, 70}, {3904, 69}, {3898, 68}, {3892, 67}, {3887, 66}, + {3880, 65}, {3874, 64}, {3868, 63}, {3862, 62}, {3854, 61}, + {3849, 60}, {3843, 59}, {3840, 58}, {3833, 57}, {3829, 56}, + {3824, 55}, {3818, 54}, {3815, 53}, {3810, 52}, {3808, 51}, + {3804, 50}, {3801, 49}, {3798, 48}, {3796, 47}, {3792, 46}, + {3789, 45}, {3785, 44}, {3784, 43}, {3782, 42}, {3780, 41}, + {3777, 40}, {3776, 39}, {3774, 38}, {3772, 37}, {3771, 36}, + {3769, 35}, {3768, 34}, {3764, 33}, {3763, 32}, {3760, 31}, + {3760, 30}, {3754, 29}, {3750, 28}, {3749, 27}, {3744, 26}, + {3740, 25}, {3734, 24}, {3732, 23}, {3728, 22}, {3726, 21}, + {3720, 20}, {3716, 19}, {3709, 18}, {3703, 17}, {3698, 16}, + {3692, 15}, {3683, 14}, {3675, 13}, {3670, 12}, {3665, 11}, + {3661, 10}, {3649, 9}, {3637, 8}, {3622, 7}, {3609, 6}, + {3580, 5}, {3558, 4}, {3540, 3}, {3510, 2}, {3429, 1}, +}; + +static struct ccnt ccnt_data; + +/* + * register 1 bit[7:0] -- bit[11:4] of measured value of voltage + * register 0 bit[3:0] -- bit[3:0] of measured value of voltage + */ +static int measure_12bit_voltage(struct pm860x_battery_info *info, + int offset, int *data) +{ + unsigned char buf[2]; + int ret; + + ret = pm860x_bulk_read(info->i2c, offset, 2, buf); + if (ret < 0) + return ret; + + *data = ((buf[0] & 0xff) << 4) | (buf[1] & 0x0f); + /* V_MEAS(mV) = data * 1.8 * 1000 / (2^12) */ + *data = ((*data & 0xfff) * 9 * 25) >> 9; + return 0; +} + +static int measure_vbatt(struct pm860x_battery_info *info, int state, + int *data) +{ + unsigned char buf[5]; + int ret; + + switch (state) { + case OCV_MODE_ACTIVE: + ret = measure_12bit_voltage(info, PM8607_VBAT_MEAS1, data); + if (ret) + return ret; + /* V_BATT_MEAS(mV) = value * 3 * 1.8 * 1000 / (2^12) */ + *data *= 3; + break; + case OCV_MODE_SLEEP: + /* + * voltage value of VBATT in sleep mode is saved in different + * registers. + * bit[11:10] -- bit[7:6] of LDO9(0x18) + * bit[9:8] -- bit[7:6] of LDO8(0x17) + * bit[7:6] -- bit[7:6] of LDO7(0x16) + * bit[5:4] -- bit[7:6] of LDO6(0x15) + * bit[3:0] -- bit[7:4] of LDO5(0x14) + */ + ret = pm860x_bulk_read(info->i2c, PM8607_LDO5, 5, buf); + if (ret < 0) + return ret; + ret = ((buf[4] >> 6) << 10) | ((buf[3] >> 6) << 8) + | ((buf[2] >> 6) << 6) | ((buf[1] >> 6) << 4) + | (buf[0] >> 4); + /* V_BATT_MEAS(mV) = data * 3 * 1.8 * 1000 / (2^12) */ + *data = ((*data & 0xff) * 27 * 25) >> 9; + break; + default: + return -EINVAL; + } + return 0; +} + +/* + * Return value is signed data. + * Negative value means discharging, and positive value means charging. + */ +static int measure_current(struct pm860x_battery_info *info, int *data) +{ + unsigned char buf[2]; + short s; + int ret; + + ret = pm860x_bulk_read(info->i2c, PM8607_IBAT_MEAS1, 2, buf); + if (ret < 0) + return ret; + + s = ((buf[0] & 0xff) << 8) | (buf[1] & 0xff); + /* current(mA) = value * 0.125 */ + *data = s >> 3; + return 0; +} + +static int set_charger_current(struct pm860x_battery_info *info, int data, + int *old) +{ + int ret; + + if (data < 50 || data > 1600 || !old) + return -EINVAL; + + data = ((data - 50) / 50) & 0x1f; + *old = pm860x_reg_read(info->i2c, PM8607_CHG_CTRL2); + *old = (*old & 0x1f) * 50 + 50; + ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL2, 0x1f, data); + if (ret < 0) + return ret; + return 0; +} + +static int read_ccnt(struct pm860x_battery_info *info, int offset, + int *ccnt) +{ + unsigned char buf[2]; + int ret; + + ret = pm860x_set_bits(info->i2c, PM8607_CCNT, 7, offset & 7); + if (ret < 0) + goto out; + ret = pm860x_bulk_read(info->i2c, PM8607_CCNT_MEAS1, 2, buf); + if (ret < 0) + goto out; + *ccnt = ((buf[0] & 0xff) << 8) | (buf[1] & 0xff); + return 0; +out: + return ret; +} + +static int calc_ccnt(struct pm860x_battery_info *info, struct ccnt *ccnt) +{ + unsigned int sum; + int ret; + int data; + + ret = read_ccnt(info, CCNT_POS1, &data); + if (ret) + goto out; + sum = data & 0xffff; + ret = read_ccnt(info, CCNT_POS2, &data); + if (ret) + goto out; + sum |= (data & 0xffff) << 16; + ccnt->pos += sum; + + ret = read_ccnt(info, CCNT_NEG1, &data); + if (ret) + goto out; + sum = data & 0xffff; + ret = read_ccnt(info, CCNT_NEG2, &data); + if (ret) + goto out; + sum |= (data & 0xffff) << 16; + sum = ~sum + 1; /* since it's negative */ + ccnt->neg += sum; + + ret = read_ccnt(info, CCNT_SPOS, &data); + if (ret) + goto out; + ccnt->spos += data; + ret = read_ccnt(info, CCNT_SNEG, &data); + if (ret) + goto out; + + /* + * charge(mAh) = count * 1.6984 * 1e(-8) + * = count * 16984 * 1.024 * 1.024 * 1.024 / (2 ^ 40) + * = count * 18236 / (2 ^ 40) + */ + ccnt->total_chg = (int) ((ccnt->pos * 18236) >> 40); + ccnt->total_dischg = (int) ((ccnt->neg * 18236) >> 40); + return 0; +out: + return ret; +} + +static int clear_ccnt(struct pm860x_battery_info *info, struct ccnt *ccnt) +{ + int data; + + memset(ccnt, 0, sizeof(*ccnt)); + /* read to clear ccnt */ + read_ccnt(info, CCNT_POS1, &data); + read_ccnt(info, CCNT_POS2, &data); + read_ccnt(info, CCNT_NEG1, &data); + read_ccnt(info, CCNT_NEG2, &data); + read_ccnt(info, CCNT_SPOS, &data); + read_ccnt(info, CCNT_SNEG, &data); + return 0; +} + +/* Calculate Open Circuit Voltage */ +static int calc_ocv(struct pm860x_battery_info *info, int *ocv) +{ + int ret; + int i; + int data; + int vbatt_avg; + int vbatt_sum; + int ibatt_avg; + int ibatt_sum; + + if (!ocv) + return -EINVAL; + + for (i = 0, ibatt_sum = 0, vbatt_sum = 0; i < 10; i++) { + ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data); + if (ret) + goto out; + vbatt_sum += data; + ret = measure_current(info, &data); + if (ret) + goto out; + ibatt_sum += data; + } + vbatt_avg = vbatt_sum / 10; + ibatt_avg = ibatt_sum / 10; + + mutex_lock(&info->lock); + if (info->present) + *ocv = vbatt_avg - ibatt_avg * info->resistor / 1000; + else + *ocv = vbatt_avg; + mutex_unlock(&info->lock); + dev_dbg(info->dev, "VBAT average:%d, OCV:%d\n", vbatt_avg, *ocv); + return 0; +out: + return ret; +} + +/* Calculate State of Charge (percent points) */ +static int calc_soc(struct pm860x_battery_info *info, int state, int *soc) +{ + int i; + int ocv; + int count; + int ret = -EINVAL; + + if (!soc) + return -EINVAL; + + switch (state) { + case OCV_MODE_ACTIVE: + ret = calc_ocv(info, &ocv); + break; + case OCV_MODE_SLEEP: + ret = measure_vbatt(info, OCV_MODE_SLEEP, &ocv); + break; + } + if (ret) + return ret; + + count = ARRAY_SIZE(array_soc); + if (ocv < array_soc[count - 1][0]) { + *soc = 0; + return 0; + } + + for (i = 0; i < count; i++) { + if (ocv >= array_soc[i][0]) { + *soc = array_soc[i][1]; + break; + } + } + return 0; +} + +static irqreturn_t pm860x_coulomb_handler(int irq, void *data) +{ + struct pm860x_battery_info *info = data; + + calc_ccnt(info, &ccnt_data); + return IRQ_HANDLED; +} + +static irqreturn_t pm860x_batt_handler(int irq, void *data) +{ + struct pm860x_battery_info *info = data; + int ret; + + mutex_lock(&info->lock); + ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2); + if (ret & STATUS2_BAT) { + info->present = 1; + info->temp_type = PM860X_TEMP_TBAT; + } else { + info->present = 0; + info->temp_type = PM860X_TEMP_TINT; + } + mutex_unlock(&info->lock); + /* clear ccnt since battery is attached or dettached */ + clear_ccnt(info, &ccnt_data); + return IRQ_HANDLED; +} + +static void pm860x_init_battery(struct pm860x_battery_info *info) +{ + unsigned char buf[2]; + int ret; + int data; + int bat_remove; + int soc = 0; + + /* measure enable on GPADC1 */ + data = MEAS1_GP1; + if (info->temp_type == PM860X_TEMP_TINT) + data |= MEAS1_TINT; + ret = pm860x_set_bits(info->i2c, PM8607_MEAS_EN1, data, data); + if (ret) + goto out; + + /* measure enable on IBAT, BAT_DET, CC. IBAT is depend on CC. */ + data = MEAS3_IBAT | MEAS3_BAT_DET | MEAS3_CC; + ret = pm860x_set_bits(info->i2c, PM8607_MEAS_EN3, data, data); + if (ret) + goto out; + + /* measure disable CC in sleep time */ + ret = pm860x_reg_write(info->i2c, PM8607_MEAS_OFF_TIME1, 0x82); + if (ret) + goto out; + ret = pm860x_reg_write(info->i2c, PM8607_MEAS_OFF_TIME2, 0x6c); + if (ret) + goto out; + + /* enable GPADC */ + ret = pm860x_set_bits(info->i2c, PM8607_GPADC_MISC1, + GPMISC1_GPADC_EN, GPMISC1_GPADC_EN); + if (ret < 0) + goto out; + + /* detect battery via GPADC1 */ + ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL6, + CC6_BAT_DET_GPADC1, CC6_BAT_DET_GPADC1); + if (ret < 0) + goto out; + + ret = pm860x_set_bits(info->i2c, PM8607_CCNT, 7 << 3, + CCNT_AVG_SEL); + if (ret < 0) + goto out; + + /* set GPADC1 bias */ + ret = pm860x_set_bits(info->i2c, PM8607_GP_BIAS2, 0xF << 4, + GPBIAS2_GPADC1_SET); + if (ret < 0) + goto out; + + /* check whether battery present) */ + mutex_lock(&info->lock); + ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2); + if (ret < 0) { + mutex_unlock(&info->lock); + goto out; + } + if (ret & STATUS2_BAT) { + info->present = 1; + info->temp_type = PM860X_TEMP_TBAT; + } else { + info->present = 0; + info->temp_type = PM860X_TEMP_TINT; + } + mutex_unlock(&info->lock); + + ret = calc_soc(info, OCV_MODE_ACTIVE, &soc); + if (ret < 0) + goto out; + + data = pm860x_reg_read(info->i2c, PM8607_POWER_UP_LOG); + bat_remove = data & BAT_WU_LOG; + + dev_dbg(info->dev, "battery wake up? %s\n", + bat_remove != 0 ? "yes" : "no"); + + /* restore SOC from RTC domain register */ + if (bat_remove == 0) { + buf[0] = pm860x_reg_read(info->i2c, PM8607_RTC_MISC2); + buf[1] = pm860x_reg_read(info->i2c, PM8607_RTC1); + data = ((buf[1] & 0x3) << 5) | ((buf[0] >> 3) & 0x1F); + if (data > soc + 15) + info->start_soc = soc; + else if (data < soc - 15) + info->start_soc = soc; + else + info->start_soc = data; + dev_dbg(info->dev, "soc_rtc %d, soc_ocv :%d\n", data, soc); + } else { + pm860x_set_bits(info->i2c, PM8607_POWER_UP_LOG, + BAT_WU_LOG, BAT_WU_LOG); + info->start_soc = soc; + } + info->last_capacity = info->start_soc; + dev_dbg(info->dev, "init soc : %d\n", info->last_capacity); +out: + return; +} + +static void set_temp_threshold(struct pm860x_battery_info *info, + int min, int max) +{ + int data; + + /* (tmp << 8) / 1800 */ + if (min <= 0) + data = 0; + else + data = (min << 8) / 1800; + pm860x_reg_write(info->i2c, PM8607_GPADC1_HIGHTH, data); + dev_dbg(info->dev, "TEMP_HIGHTH : min: %d, 0x%x\n", min, data); + + if (max <= 0) + data = 0xff; + else + data = (max << 8) / 1800; + pm860x_reg_write(info->i2c, PM8607_GPADC1_LOWTH, data); + dev_dbg(info->dev, "TEMP_LOWTH:max : %d, 0x%x\n", max, data); +} + +static int measure_temp(struct pm860x_battery_info *info, int *data) +{ + int ret; + int temp; + int min; + int max; + + if (info->temp_type == PM860X_TEMP_TINT) { + ret = measure_12bit_voltage(info, PM8607_TINT_MEAS1, data); + if (ret) + return ret; + *data = (*data - 884) * 1000 / 3611; + } else { + ret = measure_12bit_voltage(info, PM8607_GPADC1_MEAS1, data); + if (ret) + return ret; + /* meausered Vtbat(mV) / Ibias_current(11uA)*/ + *data = (*data * 1000) / GPBIAS2_GPADC1_UA; + + if (*data > TBAT_NEG_25D) { + temp = -30; /* over cold , suppose -30 roughly */ + max = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000; + set_temp_threshold(info, 0, max); + } else if (*data > TBAT_NEG_10D) { + temp = -15; /* -15 degree, code */ + max = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000; + set_temp_threshold(info, 0, max); + } else if (*data > TBAT_0D) { + temp = -5; /* -5 degree */ + min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000; + max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000; + set_temp_threshold(info, min, max); + } else if (*data > TBAT_10D) { + temp = 5; /* in range of (0, 10) */ + min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000; + max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000; + set_temp_threshold(info, min, max); + } else if (*data > TBAT_20D) { + temp = 15; /* in range of (10, 20) */ + min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000; + max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000; + set_temp_threshold(info, min, max); + } else if (*data > TBAT_30D) { + temp = 25; /* in range of (20, 30) */ + min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000; + max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000; + set_temp_threshold(info, min, max); + } else if (*data > TBAT_40D) { + temp = 35; /* in range of (30, 40) */ + min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000; + max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000; + set_temp_threshold(info, min, max); + } else { + min = TBAT_40D * GPBIAS2_GPADC1_UA / 1000; + set_temp_threshold(info, min, 0); + temp = 45; /* over heat ,suppose 45 roughly */ + } + + dev_dbg(info->dev, "temp_C:%d C,temp_mv:%d mv\n", temp, *data); + *data = temp; + } + return 0; +} + +static int calc_resistor(struct pm860x_battery_info *info) +{ + int vbatt_sum1; + int vbatt_sum2; + int chg_current; + int ibatt_sum1; + int ibatt_sum2; + int data; + int ret; + int i; + + ret = measure_current(info, &data); + /* make sure that charging is launched by data > 0 */ + if (ret || data < 0) + goto out; + + ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data); + if (ret) + goto out; + /* calculate resistor only in CC charge mode */ + if (data < VBATT_RESISTOR_MIN || data > VBATT_RESISTOR_MAX) + goto out; + + /* current is saved */ + if (set_charger_current(info, 500, &chg_current)) + goto out; + + /* + * set charge current as 500mA, wait about 500ms till charging + * process is launched and stable with the newer charging current. + */ + msleep(500); + + for (i = 0, vbatt_sum1 = 0, ibatt_sum1 = 0; i < 10; i++) { + ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data); + if (ret) + goto out_meas; + vbatt_sum1 += data; + ret = measure_current(info, &data); + if (ret) + goto out_meas; + + if (data < 0) + ibatt_sum1 = ibatt_sum1 - data; /* discharging */ + else + ibatt_sum1 = ibatt_sum1 + data; /* charging */ + } + + if (set_charger_current(info, 100, &ret)) + goto out_meas; + /* + * set charge current as 100mA, wait about 500ms till charging + * process is launched and stable with the newer charging current. + */ + msleep(500); + + for (i = 0, vbatt_sum2 = 0, ibatt_sum2 = 0; i < 10; i++) { + ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data); + if (ret) + goto out_meas; + vbatt_sum2 += data; + ret = measure_current(info, &data); + if (ret) + goto out_meas; + + if (data < 0) + ibatt_sum2 = ibatt_sum2 - data; /* discharging */ + else + ibatt_sum2 = ibatt_sum2 + data; /* charging */ + } + + /* restore current setting */ + if (set_charger_current(info, chg_current, &ret)) + goto out_meas; + + if ((vbatt_sum1 > vbatt_sum2) && (ibatt_sum1 > ibatt_sum2) && + (ibatt_sum2 > 0)) { + /* calculate resistor in discharging case */ + data = 1000 * (vbatt_sum1 - vbatt_sum2) + / (ibatt_sum1 - ibatt_sum2); + if ((data - info->resistor > 0) && + (data - info->resistor < info->resistor)) + info->resistor = data; + if ((info->resistor - data > 0) && + (info->resistor - data < data)) + info->resistor = data; + } + return 0; + +out_meas: + set_charger_current(info, chg_current, &ret); +out: + return -EINVAL; +} + +static int calc_capacity(struct pm860x_battery_info *info, int *cap) +{ + int ret; + int data; + int ibat; + int cap_ocv = 0; + int cap_cc = 0; + + ret = calc_ccnt(info, &ccnt_data); + if (ret) + goto out; +soc: + data = info->max_capacity * info->start_soc / 100; + if (ccnt_data.total_dischg - ccnt_data.total_chg <= data) { + cap_cc = + data + ccnt_data.total_chg - ccnt_data.total_dischg; + } else { + clear_ccnt(info, &ccnt_data); + calc_soc(info, OCV_MODE_ACTIVE, &info->start_soc); + dev_dbg(info->dev, "restart soc = %d !\n", + info->start_soc); + goto soc; + } + + cap_cc = cap_cc * 100 / info->max_capacity; + if (cap_cc < 0) + cap_cc = 0; + else if (cap_cc > 100) + cap_cc = 100; + + dev_dbg(info->dev, "%s, last cap : %d", __func__, + info->last_capacity); + + ret = measure_current(info, &ibat); + if (ret) + goto out; + /* Calculate the capacity when discharging(ibat < 0) */ + if (ibat < 0) { + ret = calc_soc(info, OCV_MODE_ACTIVE, &cap_ocv); + if (ret) + cap_ocv = info->last_capacity; + ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data); + if (ret) + goto out; + if (data <= LOW_BAT_THRESHOLD) { + /* choose the lower capacity value to report + * between vbat and CC when vbat < 3.6v; + * than 3.6v; + */ + *cap = min(cap_ocv, cap_cc); + } else { + /* when detect vbat > 3.6v, but cap_cc < 15,and + * cap_ocv is 10% larger than cap_cc, we can think + * CC have some accumulation error, switch to OCV + * to estimate capacity; + * */ + if (cap_cc < 15 && cap_ocv - cap_cc > 10) + *cap = cap_ocv; + else + *cap = cap_cc; + } + /* when discharging, make sure current capacity + * is lower than last*/ + if (*cap > info->last_capacity) + *cap = info->last_capacity; + } else { + *cap = cap_cc; + } + info->last_capacity = *cap; + + dev_dbg(info->dev, "%s, cap_ocv:%d cap_cc:%d, cap:%d\n", + (ibat < 0) ? "discharging" : "charging", + cap_ocv, cap_cc, *cap); + /* + * store the current capacity to RTC domain register, + * after next power up , it will be restored. + */ + pm860x_set_bits(info->i2c, PM8607_RTC_MISC2, RTC_SOC_5LSB, + (*cap & 0x1F) << 3); + pm860x_set_bits(info->i2c, PM8607_RTC1, RTC_SOC_3MSB, + ((*cap >> 5) & 0x3)); + return 0; +out: + return ret; +} + +static void pm860x_external_power_changed(struct power_supply *psy) +{ + struct pm860x_battery_info *info = dev_get_drvdata(psy->dev.parent); + + calc_resistor(info); +} + +static int pm860x_batt_get_prop(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct pm860x_battery_info *info = dev_get_drvdata(psy->dev.parent); + int data; + int ret; + + switch (psp) { + case POWER_SUPPLY_PROP_PRESENT: + val->intval = info->present; + break; + case POWER_SUPPLY_PROP_CAPACITY: + ret = calc_capacity(info, &data); + if (ret) + return ret; + if (data < 0) + data = 0; + else if (data > 100) + data = 100; + /* return 100 if battery is not attached */ + if (!info->present) + data = 100; + val->intval = data; + break; + case POWER_SUPPLY_PROP_TECHNOLOGY: + val->intval = POWER_SUPPLY_TECHNOLOGY_LION; + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + /* return real vbatt Voltage */ + ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data); + if (ret) + return ret; + val->intval = data * 1000; + break; + case POWER_SUPPLY_PROP_VOLTAGE_AVG: + /* return Open Circuit Voltage (not measured voltage) */ + ret = calc_ocv(info, &data); + if (ret) + return ret; + val->intval = data * 1000; + break; + case POWER_SUPPLY_PROP_CURRENT_NOW: + ret = measure_current(info, &data); + if (ret) + return ret; + val->intval = data; + break; + case POWER_SUPPLY_PROP_TEMP: + if (info->present) { + ret = measure_temp(info, &data); + if (ret) + return ret; + data *= 10; + } else { + /* Fake Temp 25C Without Battery */ + data = 250; + } + val->intval = data; + break; + default: + return -ENODEV; + } + return 0; +} + +static int pm860x_batt_set_prop(struct power_supply *psy, + enum power_supply_property psp, + const union power_supply_propval *val) +{ + struct pm860x_battery_info *info = dev_get_drvdata(psy->dev.parent); + + switch (psp) { + case POWER_SUPPLY_PROP_CHARGE_FULL: + clear_ccnt(info, &ccnt_data); + info->start_soc = 100; + dev_dbg(info->dev, "chg done, update soc = %d\n", + info->start_soc); + break; + default: + return -EPERM; + } + + return 0; +} + + +static enum power_supply_property pm860x_batt_props[] = { + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_VOLTAGE_AVG, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_TEMP, +}; + +static const struct power_supply_desc pm860x_battery_desc = { + .name = "battery-monitor", + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = pm860x_batt_props, + .num_properties = ARRAY_SIZE(pm860x_batt_props), + .get_property = pm860x_batt_get_prop, + .set_property = pm860x_batt_set_prop, + .external_power_changed = pm860x_external_power_changed, +}; + +static int pm860x_battery_probe(struct platform_device *pdev) +{ + struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); + struct pm860x_battery_info *info; + struct pm860x_power_pdata *pdata; + int ret; + + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->irq_cc = platform_get_irq(pdev, 0); + if (info->irq_cc <= 0) + return -EINVAL; + + info->irq_batt = platform_get_irq(pdev, 1); + if (info->irq_batt <= 0) + return -EINVAL; + + info->chip = chip; + info->i2c = + (chip->id == CHIP_PM8607) ? chip->client : chip->companion; + info->dev = &pdev->dev; + info->status = POWER_SUPPLY_STATUS_UNKNOWN; + pdata = pdev->dev.platform_data; + + mutex_init(&info->lock); + platform_set_drvdata(pdev, info); + + pm860x_init_battery(info); + + if (pdata && pdata->max_capacity) + info->max_capacity = pdata->max_capacity; + else + info->max_capacity = 1500; /* set default capacity */ + if (pdata && pdata->resistor) + info->resistor = pdata->resistor; + else + info->resistor = 300; /* set default internal resistor */ + + info->battery = devm_power_supply_register(&pdev->dev, + &pm860x_battery_desc, + NULL); + if (IS_ERR(info->battery)) + return PTR_ERR(info->battery); + info->battery->dev.parent = &pdev->dev; + + ret = devm_request_threaded_irq(chip->dev, info->irq_cc, NULL, + pm860x_coulomb_handler, IRQF_ONESHOT, + "coulomb", info); + if (ret < 0) { + dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n", + info->irq_cc, ret); + return ret; + } + + ret = devm_request_threaded_irq(chip->dev, info->irq_batt, NULL, + pm860x_batt_handler, + IRQF_ONESHOT, "battery", info); + if (ret < 0) { + dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n", + info->irq_batt, ret); + return ret; + } + + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int pm860x_battery_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); + + if (device_may_wakeup(dev)) + chip->wakeup_flag |= 1 << PM8607_IRQ_CC; + return 0; +} + +static int pm860x_battery_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); + + if (device_may_wakeup(dev)) + chip->wakeup_flag &= ~(1 << PM8607_IRQ_CC); + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(pm860x_battery_pm_ops, + pm860x_battery_suspend, pm860x_battery_resume); + +static struct platform_driver pm860x_battery_driver = { + .driver = { + .name = "88pm860x-battery", + .pm = &pm860x_battery_pm_ops, + }, + .probe = pm860x_battery_probe, +}; +module_platform_driver(pm860x_battery_driver); + +MODULE_DESCRIPTION("Marvell 88PM860x Battery driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3