From 83506c85f8d4332b3edfdc8f1fd07aa691415350 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Wed, 8 May 2024 19:45:29 +0200 Subject: Adding upstream version 5.10.216. Signed-off-by: Daniel Baumann --- drivers/tty/serial/8250/8250_core.c | 1 + drivers/tty/serial/8250/8250_exar.c | 18 ++++++++++++++---- drivers/tty/serial/8250/8250_port.c | 6 ------ 3 files changed, 15 insertions(+), 10 deletions(-) (limited to 'drivers/tty/serial/8250') diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 43f2eed6d..355ee338d 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -1026,6 +1026,7 @@ int serial8250_register_8250_port(struct uart_8250_port *up) uart->port.throttle = up->port.throttle; uart->port.unthrottle = up->port.unthrottle; uart->port.rs485_config = up->port.rs485_config; + uart->port.rs485_supported = up->port.rs485_supported; uart->port.rs485 = up->port.rs485; uart->rs485_start_tx = up->rs485_start_tx; uart->rs485_stop_tx = up->rs485_stop_tx; diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c index 5c2adf140..7c28d2752 100644 --- a/drivers/tty/serial/8250/8250_exar.c +++ b/drivers/tty/serial/8250/8250_exar.c @@ -123,6 +123,7 @@ struct exar8250; struct exar8250_platform { int (*rs485_config)(struct uart_port *, struct serial_rs485 *); + const struct serial_rs485 *rs485_supported; int (*register_gpio)(struct pci_dev *, struct uart_8250_port *); }; @@ -423,9 +424,14 @@ static int generic_rs485_config(struct uart_port *port, return 0; } +static const struct serial_rs485 generic_rs485_supported = { + .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND, +}; + static const struct exar8250_platform exar8250_default_platform = { .register_gpio = xr17v35x_register_gpio, .rs485_config = generic_rs485_config, + .rs485_supported = &generic_rs485_supported, }; static int iot2040_rs485_config(struct uart_port *port, @@ -461,6 +467,11 @@ static int iot2040_rs485_config(struct uart_port *port, return generic_rs485_config(port, rs485); } +static const struct serial_rs485 iot2040_rs485_supported = { + .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | + SER_RS485_RX_DURING_TX | SER_RS485_TERMINATE_BUS, +}; + static const struct property_entry iot2040_gpio_properties[] = { PROPERTY_ENTRY_U32("exar,first-pin", 10), PROPERTY_ENTRY_U32("ngpios", 1), @@ -485,6 +496,7 @@ static int iot2040_register_gpio(struct pci_dev *pcidev, static const struct exar8250_platform iot2040_platform = { .rs485_config = iot2040_rs485_config, + .rs485_supported = &iot2040_rs485_supported, .register_gpio = iot2040_register_gpio, }; @@ -522,6 +534,7 @@ pci_xr17v35x_setup(struct exar8250 *priv, struct pci_dev *pcidev, port->port.uartclk = baud * 16; port->port.rs485_config = platform->rs485_config; + port->port.rs485_supported = platform->rs485_supported; /* * Setup the UART clock for the devices on expansion slot to @@ -675,6 +688,7 @@ static void exar_pci_remove(struct pci_dev *pcidev) for (i = 0; i < priv->nr; i++) serial8250_unregister_port(priv->line[i]); + /* Ensure that every init quirk is properly torn down */ if (priv->board->exit) priv->board->exit(pcidev); } @@ -689,10 +703,6 @@ static int __maybe_unused exar_suspend(struct device *dev) if (priv->line[i] >= 0) serial8250_suspend_port(priv->line[i]); - /* Ensure that every init quirk is properly torn down */ - if (priv->board->exit) - priv->board->exit(pcidev); - return 0; } diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 8b49ac485..6098e87a3 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -1358,9 +1358,6 @@ static void autoconfig_irq(struct uart_8250_port *up) inb_p(ICP); } - if (uart_console(port)) - console_lock(); - /* forget possible initially masked and pending IRQ */ probe_irq_off(probe_irq_on()); save_mcr = serial8250_in_MCR(up); @@ -1391,9 +1388,6 @@ static void autoconfig_irq(struct uart_8250_port *up) if (port->flags & UPF_FOURPORT) outb_p(save_ICP, ICP); - if (uart_console(port)) - console_unlock(); - port->irq = (irq > 0) ? irq : 0; } -- cgit v1.2.3