From 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 12:05:51 +0200 Subject: Adding upstream version 5.10.209. Signed-off-by: Daniel Baumann --- drivers/tty/serial/lantiq.c | 973 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 973 insertions(+) create mode 100644 drivers/tty/serial/lantiq.c (limited to 'drivers/tty/serial/lantiq.c') diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c new file mode 100644 index 000000000..ee5fd4d84 --- /dev/null +++ b/drivers/tty/serial/lantiq.c @@ -0,0 +1,973 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright (C) 2004 Infineon IFAP DC COM CPE + * Copyright (C) 2007 Felix Fietkau + * Copyright (C) 2007 John Crispin + * Copyright (C) 2010 Thomas Langer, + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define PORT_LTQ_ASC 111 +#define MAXPORTS 2 +#define UART_DUMMY_UER_RX 1 +#define DRVNAME "lantiq,asc" +#ifdef __BIG_ENDIAN +#define LTQ_ASC_TBUF (0x0020 + 3) +#define LTQ_ASC_RBUF (0x0024 + 3) +#else +#define LTQ_ASC_TBUF 0x0020 +#define LTQ_ASC_RBUF 0x0024 +#endif +#define LTQ_ASC_FSTAT 0x0048 +#define LTQ_ASC_WHBSTATE 0x0018 +#define LTQ_ASC_STATE 0x0014 +#define LTQ_ASC_IRNCR 0x00F8 +#define LTQ_ASC_CLC 0x0000 +#define LTQ_ASC_ID 0x0008 +#define LTQ_ASC_PISEL 0x0004 +#define LTQ_ASC_TXFCON 0x0044 +#define LTQ_ASC_RXFCON 0x0040 +#define LTQ_ASC_CON 0x0010 +#define LTQ_ASC_BG 0x0050 +#define LTQ_ASC_IRNREN 0x00F4 + +#define ASC_IRNREN_TX 0x1 +#define ASC_IRNREN_RX 0x2 +#define ASC_IRNREN_ERR 0x4 +#define ASC_IRNREN_TX_BUF 0x8 +#define ASC_IRNCR_TIR 0x1 +#define ASC_IRNCR_RIR 0x2 +#define ASC_IRNCR_EIR 0x4 +#define ASC_IRNCR_MASK GENMASK(2, 0) + +#define ASCOPT_CSIZE 0x3 +#define TXFIFO_FL 1 +#define RXFIFO_FL 1 +#define ASCCLC_DISS 0x2 +#define ASCCLC_RMCMASK 0x0000FF00 +#define ASCCLC_RMCOFFSET 8 +#define ASCCON_M_8ASYNC 0x0 +#define ASCCON_M_7ASYNC 0x2 +#define ASCCON_ODD 0x00000020 +#define ASCCON_STP 0x00000080 +#define ASCCON_BRS 0x00000100 +#define ASCCON_FDE 0x00000200 +#define ASCCON_R 0x00008000 +#define ASCCON_FEN 0x00020000 +#define ASCCON_ROEN 0x00080000 +#define ASCCON_TOEN 0x00100000 +#define ASCSTATE_PE 0x00010000 +#define ASCSTATE_FE 0x00020000 +#define ASCSTATE_ROE 0x00080000 +#define ASCSTATE_ANY (ASCSTATE_ROE|ASCSTATE_PE|ASCSTATE_FE) +#define ASCWHBSTATE_CLRREN 0x00000001 +#define ASCWHBSTATE_SETREN 0x00000002 +#define ASCWHBSTATE_CLRPE 0x00000004 +#define ASCWHBSTATE_CLRFE 0x00000008 +#define ASCWHBSTATE_CLRROE 0x00000020 +#define ASCTXFCON_TXFEN 0x0001 +#define ASCTXFCON_TXFFLU 0x0002 +#define ASCTXFCON_TXFITLMASK 0x3F00 +#define ASCTXFCON_TXFITLOFF 8 +#define ASCRXFCON_RXFEN 0x0001 +#define ASCRXFCON_RXFFLU 0x0002 +#define ASCRXFCON_RXFITLMASK 0x3F00 +#define ASCRXFCON_RXFITLOFF 8 +#define ASCFSTAT_RXFFLMASK 0x003F +#define ASCFSTAT_TXFFLMASK 0x3F00 +#define ASCFSTAT_TXFREEMASK 0x3F000000 +#define ASCFSTAT_TXFREEOFF 24 + +static void lqasc_tx_chars(struct uart_port *port); +static struct ltq_uart_port *lqasc_port[MAXPORTS]; +static struct uart_driver lqasc_reg; + +struct ltq_soc_data { + int (*fetch_irq)(struct device *dev, struct ltq_uart_port *ltq_port); + int (*request_irq)(struct uart_port *port); + void (*free_irq)(struct uart_port *port); +}; + +struct ltq_uart_port { + struct uart_port port; + /* clock used to derive divider */ + struct clk *freqclk; + /* clock gating of the ASC core */ + struct clk *clk; + unsigned int tx_irq; + unsigned int rx_irq; + unsigned int err_irq; + unsigned int common_irq; + spinlock_t lock; /* exclusive access for multi core */ + + const struct ltq_soc_data *soc; +}; + +static inline void asc_update_bits(u32 clear, u32 set, void __iomem *reg) +{ + u32 tmp = __raw_readl(reg); + + __raw_writel((tmp & ~clear) | set, reg); +} + +static inline struct +ltq_uart_port *to_ltq_uart_port(struct uart_port *port) +{ + return container_of(port, struct ltq_uart_port, port); +} + +static void +lqasc_stop_tx(struct uart_port *port) +{ + return; +} + +static void +lqasc_start_tx(struct uart_port *port) +{ + unsigned long flags; + struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); + + spin_lock_irqsave(<q_port->lock, flags); + lqasc_tx_chars(port); + spin_unlock_irqrestore(<q_port->lock, flags); + return; +} + +static void +lqasc_stop_rx(struct uart_port *port) +{ + __raw_writel(ASCWHBSTATE_CLRREN, port->membase + LTQ_ASC_WHBSTATE); +} + +static int +lqasc_rx_chars(struct uart_port *port) +{ + struct tty_port *tport = &port->state->port; + unsigned int ch = 0, rsr = 0, fifocnt; + + fifocnt = __raw_readl(port->membase + LTQ_ASC_FSTAT) & + ASCFSTAT_RXFFLMASK; + while (fifocnt--) { + u8 flag = TTY_NORMAL; + ch = readb(port->membase + LTQ_ASC_RBUF); + rsr = (__raw_readl(port->membase + LTQ_ASC_STATE) + & ASCSTATE_ANY) | UART_DUMMY_UER_RX; + tty_flip_buffer_push(tport); + port->icount.rx++; + + /* + * Note that the error handling code is + * out of the main execution path + */ + if (rsr & ASCSTATE_ANY) { + if (rsr & ASCSTATE_PE) { + port->icount.parity++; + asc_update_bits(0, ASCWHBSTATE_CLRPE, + port->membase + LTQ_ASC_WHBSTATE); + } else if (rsr & ASCSTATE_FE) { + port->icount.frame++; + asc_update_bits(0, ASCWHBSTATE_CLRFE, + port->membase + LTQ_ASC_WHBSTATE); + } + if (rsr & ASCSTATE_ROE) { + port->icount.overrun++; + asc_update_bits(0, ASCWHBSTATE_CLRROE, + port->membase + LTQ_ASC_WHBSTATE); + } + + rsr &= port->read_status_mask; + + if (rsr & ASCSTATE_PE) + flag = TTY_PARITY; + else if (rsr & ASCSTATE_FE) + flag = TTY_FRAME; + } + + if ((rsr & port->ignore_status_mask) == 0) + tty_insert_flip_char(tport, ch, flag); + + if (rsr & ASCSTATE_ROE) + /* + * Overrun is special, since it's reported + * immediately, and doesn't affect the current + * character + */ + tty_insert_flip_char(tport, 0, TTY_OVERRUN); + } + + if (ch != 0) + tty_flip_buffer_push(tport); + + return 0; +} + +static void +lqasc_tx_chars(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + if (uart_tx_stopped(port)) { + lqasc_stop_tx(port); + return; + } + + while (((__raw_readl(port->membase + LTQ_ASC_FSTAT) & + ASCFSTAT_TXFREEMASK) >> ASCFSTAT_TXFREEOFF) != 0) { + if (port->x_char) { + writeb(port->x_char, port->membase + LTQ_ASC_TBUF); + port->icount.tx++; + port->x_char = 0; + continue; + } + + if (uart_circ_empty(xmit)) + break; + + writeb(port->state->xmit.buf[port->state->xmit.tail], + port->membase + LTQ_ASC_TBUF); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); +} + +static irqreturn_t +lqasc_tx_int(int irq, void *_port) +{ + unsigned long flags; + struct uart_port *port = (struct uart_port *)_port; + struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); + + spin_lock_irqsave(<q_port->lock, flags); + __raw_writel(ASC_IRNCR_TIR, port->membase + LTQ_ASC_IRNCR); + spin_unlock_irqrestore(<q_port->lock, flags); + lqasc_start_tx(port); + return IRQ_HANDLED; +} + +static irqreturn_t +lqasc_err_int(int irq, void *_port) +{ + unsigned long flags; + struct uart_port *port = (struct uart_port *)_port; + struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); + + spin_lock_irqsave(<q_port->lock, flags); + __raw_writel(ASC_IRNCR_EIR, port->membase + LTQ_ASC_IRNCR); + /* clear any pending interrupts */ + asc_update_bits(0, ASCWHBSTATE_CLRPE | ASCWHBSTATE_CLRFE | + ASCWHBSTATE_CLRROE, port->membase + LTQ_ASC_WHBSTATE); + spin_unlock_irqrestore(<q_port->lock, flags); + return IRQ_HANDLED; +} + +static irqreturn_t +lqasc_rx_int(int irq, void *_port) +{ + unsigned long flags; + struct uart_port *port = (struct uart_port *)_port; + struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); + + spin_lock_irqsave(<q_port->lock, flags); + __raw_writel(ASC_IRNCR_RIR, port->membase + LTQ_ASC_IRNCR); + lqasc_rx_chars(port); + spin_unlock_irqrestore(<q_port->lock, flags); + return IRQ_HANDLED; +} + +static irqreturn_t lqasc_irq(int irq, void *p) +{ + unsigned long flags; + u32 stat; + struct uart_port *port = p; + struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); + + spin_lock_irqsave(<q_port->lock, flags); + stat = readl(port->membase + LTQ_ASC_IRNCR); + spin_unlock_irqrestore(<q_port->lock, flags); + if (!(stat & ASC_IRNCR_MASK)) + return IRQ_NONE; + + if (stat & ASC_IRNCR_TIR) + lqasc_tx_int(irq, p); + + if (stat & ASC_IRNCR_RIR) + lqasc_rx_int(irq, p); + + if (stat & ASC_IRNCR_EIR) + lqasc_err_int(irq, p); + + return IRQ_HANDLED; +} + +static unsigned int +lqasc_tx_empty(struct uart_port *port) +{ + int status; + status = __raw_readl(port->membase + LTQ_ASC_FSTAT) & + ASCFSTAT_TXFFLMASK; + return status ? 0 : TIOCSER_TEMT; +} + +static unsigned int +lqasc_get_mctrl(struct uart_port *port) +{ + return TIOCM_CTS | TIOCM_CAR | TIOCM_DSR; +} + +static void +lqasc_set_mctrl(struct uart_port *port, u_int mctrl) +{ +} + +static void +lqasc_break_ctl(struct uart_port *port, int break_state) +{ +} + +static int +lqasc_startup(struct uart_port *port) +{ + struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); + int retval; + unsigned long flags; + + if (!IS_ERR(ltq_port->clk)) + clk_prepare_enable(ltq_port->clk); + port->uartclk = clk_get_rate(ltq_port->freqclk); + + spin_lock_irqsave(<q_port->lock, flags); + asc_update_bits(ASCCLC_DISS | ASCCLC_RMCMASK, (1 << ASCCLC_RMCOFFSET), + port->membase + LTQ_ASC_CLC); + + __raw_writel(0, port->membase + LTQ_ASC_PISEL); + __raw_writel( + ((TXFIFO_FL << ASCTXFCON_TXFITLOFF) & ASCTXFCON_TXFITLMASK) | + ASCTXFCON_TXFEN | ASCTXFCON_TXFFLU, + port->membase + LTQ_ASC_TXFCON); + __raw_writel( + ((RXFIFO_FL << ASCRXFCON_RXFITLOFF) & ASCRXFCON_RXFITLMASK) + | ASCRXFCON_RXFEN | ASCRXFCON_RXFFLU, + port->membase + LTQ_ASC_RXFCON); + /* make sure other settings are written to hardware before + * setting enable bits + */ + wmb(); + asc_update_bits(0, ASCCON_M_8ASYNC | ASCCON_FEN | ASCCON_TOEN | + ASCCON_ROEN, port->membase + LTQ_ASC_CON); + + spin_unlock_irqrestore(<q_port->lock, flags); + + retval = ltq_port->soc->request_irq(port); + if (retval) + return retval; + + __raw_writel(ASC_IRNREN_RX | ASC_IRNREN_ERR | ASC_IRNREN_TX, + port->membase + LTQ_ASC_IRNREN); + return retval; +} + +static void +lqasc_shutdown(struct uart_port *port) +{ + struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); + unsigned long flags; + + ltq_port->soc->free_irq(port); + + spin_lock_irqsave(<q_port->lock, flags); + __raw_writel(0, port->membase + LTQ_ASC_CON); + asc_update_bits(ASCRXFCON_RXFEN, ASCRXFCON_RXFFLU, + port->membase + LTQ_ASC_RXFCON); + asc_update_bits(ASCTXFCON_TXFEN, ASCTXFCON_TXFFLU, + port->membase + LTQ_ASC_TXFCON); + spin_unlock_irqrestore(<q_port->lock, flags); + if (!IS_ERR(ltq_port->clk)) + clk_disable_unprepare(ltq_port->clk); +} + +static void +lqasc_set_termios(struct uart_port *port, + struct ktermios *new, struct ktermios *old) +{ + unsigned int cflag; + unsigned int iflag; + unsigned int divisor; + unsigned int baud; + unsigned int con = 0; + unsigned long flags; + struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); + + cflag = new->c_cflag; + iflag = new->c_iflag; + + switch (cflag & CSIZE) { + case CS7: + con = ASCCON_M_7ASYNC; + break; + + case CS5: + case CS6: + default: + new->c_cflag &= ~ CSIZE; + new->c_cflag |= CS8; + con = ASCCON_M_8ASYNC; + break; + } + + cflag &= ~CMSPAR; /* Mark/Space parity is not supported */ + + if (cflag & CSTOPB) + con |= ASCCON_STP; + + if (cflag & PARENB) { + if (!(cflag & PARODD)) + con &= ~ASCCON_ODD; + else + con |= ASCCON_ODD; + } + + port->read_status_mask = ASCSTATE_ROE; + if (iflag & INPCK) + port->read_status_mask |= ASCSTATE_FE | ASCSTATE_PE; + + port->ignore_status_mask = 0; + if (iflag & IGNPAR) + port->ignore_status_mask |= ASCSTATE_FE | ASCSTATE_PE; + + if (iflag & IGNBRK) { + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (iflag & IGNPAR) + port->ignore_status_mask |= ASCSTATE_ROE; + } + + if ((cflag & CREAD) == 0) + port->ignore_status_mask |= UART_DUMMY_UER_RX; + + /* set error signals - framing, parity and overrun, enable receiver */ + con |= ASCCON_FEN | ASCCON_TOEN | ASCCON_ROEN; + + spin_lock_irqsave(<q_port->lock, flags); + + /* set up CON */ + asc_update_bits(0, con, port->membase + LTQ_ASC_CON); + + /* Set baud rate - take a divider of 2 into account */ + baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16); + divisor = uart_get_divisor(port, baud); + divisor = divisor / 2 - 1; + + /* disable the baudrate generator */ + asc_update_bits(ASCCON_R, 0, port->membase + LTQ_ASC_CON); + + /* make sure the fractional divider is off */ + asc_update_bits(ASCCON_FDE, 0, port->membase + LTQ_ASC_CON); + + /* set up to use divisor of 2 */ + asc_update_bits(ASCCON_BRS, 0, port->membase + LTQ_ASC_CON); + + /* now we can write the new baudrate into the register */ + __raw_writel(divisor, port->membase + LTQ_ASC_BG); + + /* turn the baudrate generator back on */ + asc_update_bits(0, ASCCON_R, port->membase + LTQ_ASC_CON); + + /* enable rx */ + __raw_writel(ASCWHBSTATE_SETREN, port->membase + LTQ_ASC_WHBSTATE); + + spin_unlock_irqrestore(<q_port->lock, flags); + + /* Don't rewrite B0 */ + if (tty_termios_baud_rate(new)) + tty_termios_encode_baud_rate(new, baud, baud); + + uart_update_timeout(port, cflag, baud); +} + +static const char* +lqasc_type(struct uart_port *port) +{ + if (port->type == PORT_LTQ_ASC) + return DRVNAME; + else + return NULL; +} + +static void +lqasc_release_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + + if (port->flags & UPF_IOREMAP) { + devm_iounmap(&pdev->dev, port->membase); + port->membase = NULL; + } +} + +static int +lqasc_request_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + struct resource *res; + int size; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "cannot obtain I/O memory region"); + return -ENODEV; + } + size = resource_size(res); + + res = devm_request_mem_region(&pdev->dev, res->start, + size, dev_name(&pdev->dev)); + if (!res) { + dev_err(&pdev->dev, "cannot request I/O memory region"); + return -EBUSY; + } + + if (port->flags & UPF_IOREMAP) { + port->membase = devm_ioremap(&pdev->dev, + port->mapbase, size); + if (port->membase == NULL) + return -ENOMEM; + } + return 0; +} + +static void +lqasc_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_LTQ_ASC; + lqasc_request_port(port); + } +} + +static int +lqasc_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + int ret = 0; + if (ser->type != PORT_UNKNOWN && ser->type != PORT_LTQ_ASC) + ret = -EINVAL; + if (ser->irq < 0 || ser->irq >= NR_IRQS) + ret = -EINVAL; + if (ser->baud_base < 9600) + ret = -EINVAL; + return ret; +} + +static const struct uart_ops lqasc_pops = { + .tx_empty = lqasc_tx_empty, + .set_mctrl = lqasc_set_mctrl, + .get_mctrl = lqasc_get_mctrl, + .stop_tx = lqasc_stop_tx, + .start_tx = lqasc_start_tx, + .stop_rx = lqasc_stop_rx, + .break_ctl = lqasc_break_ctl, + .startup = lqasc_startup, + .shutdown = lqasc_shutdown, + .set_termios = lqasc_set_termios, + .type = lqasc_type, + .release_port = lqasc_release_port, + .request_port = lqasc_request_port, + .config_port = lqasc_config_port, + .verify_port = lqasc_verify_port, +}; + +#ifdef CONFIG_SERIAL_LANTIQ_CONSOLE +static void +lqasc_console_putchar(struct uart_port *port, int ch) +{ + int fifofree; + + if (!port->membase) + return; + + do { + fifofree = (__raw_readl(port->membase + LTQ_ASC_FSTAT) + & ASCFSTAT_TXFREEMASK) >> ASCFSTAT_TXFREEOFF; + } while (fifofree == 0); + writeb(ch, port->membase + LTQ_ASC_TBUF); +} + +static void lqasc_serial_port_write(struct uart_port *port, const char *s, + u_int count) +{ + uart_console_write(port, s, count, lqasc_console_putchar); +} + +static void +lqasc_console_write(struct console *co, const char *s, u_int count) +{ + struct ltq_uart_port *ltq_port; + unsigned long flags; + + if (co->index >= MAXPORTS) + return; + + ltq_port = lqasc_port[co->index]; + if (!ltq_port) + return; + + spin_lock_irqsave(<q_port->lock, flags); + lqasc_serial_port_write(<q_port->port, s, count); + spin_unlock_irqrestore(<q_port->lock, flags); +} + +static int __init +lqasc_console_setup(struct console *co, char *options) +{ + struct ltq_uart_port *ltq_port; + struct uart_port *port; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index >= MAXPORTS) + return -ENODEV; + + ltq_port = lqasc_port[co->index]; + if (!ltq_port) + return -ENODEV; + + port = <q_port->port; + + if (!IS_ERR(ltq_port->clk)) + clk_prepare_enable(ltq_port->clk); + + port->uartclk = clk_get_rate(ltq_port->freqclk); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct console lqasc_console = { + .name = "ttyLTQ", + .write = lqasc_console_write, + .device = uart_console_device, + .setup = lqasc_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &lqasc_reg, +}; + +static int __init +lqasc_console_init(void) +{ + register_console(&lqasc_console); + return 0; +} +console_initcall(lqasc_console_init); + +static void lqasc_serial_early_console_write(struct console *co, + const char *s, + u_int count) +{ + struct earlycon_device *dev = co->data; + + lqasc_serial_port_write(&dev->port, s, count); +} + +static int __init +lqasc_serial_early_console_setup(struct earlycon_device *device, + const char *opt) +{ + if (!device->port.membase) + return -ENODEV; + + device->con->write = lqasc_serial_early_console_write; + return 0; +} +OF_EARLYCON_DECLARE(lantiq, "lantiq,asc", lqasc_serial_early_console_setup); +OF_EARLYCON_DECLARE(lantiq, "intel,lgm-asc", lqasc_serial_early_console_setup); + +#define LANTIQ_SERIAL_CONSOLE (&lqasc_console) + +#else + +#define LANTIQ_SERIAL_CONSOLE NULL + +#endif /* CONFIG_SERIAL_LANTIQ_CONSOLE */ + +static struct uart_driver lqasc_reg = { + .owner = THIS_MODULE, + .driver_name = DRVNAME, + .dev_name = "ttyLTQ", + .major = 0, + .minor = 0, + .nr = MAXPORTS, + .cons = LANTIQ_SERIAL_CONSOLE, +}; + +static int fetch_irq_lantiq(struct device *dev, struct ltq_uart_port *ltq_port) +{ + struct uart_port *port = <q_port->port; + struct resource irqres[3]; + int ret; + + ret = of_irq_to_resource_table(dev->of_node, irqres, 3); + if (ret != 3) { + dev_err(dev, + "failed to get IRQs for serial port\n"); + return -ENODEV; + } + ltq_port->tx_irq = irqres[0].start; + ltq_port->rx_irq = irqres[1].start; + ltq_port->err_irq = irqres[2].start; + port->irq = irqres[0].start; + + return 0; +} + +static int request_irq_lantiq(struct uart_port *port) +{ + struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); + int retval; + + retval = request_irq(ltq_port->tx_irq, lqasc_tx_int, + 0, "asc_tx", port); + if (retval) { + dev_err(port->dev, "failed to request asc_tx\n"); + return retval; + } + + retval = request_irq(ltq_port->rx_irq, lqasc_rx_int, + 0, "asc_rx", port); + if (retval) { + dev_err(port->dev, "failed to request asc_rx\n"); + goto err1; + } + + retval = request_irq(ltq_port->err_irq, lqasc_err_int, + 0, "asc_err", port); + if (retval) { + dev_err(port->dev, "failed to request asc_err\n"); + goto err2; + } + return 0; + +err2: + free_irq(ltq_port->rx_irq, port); +err1: + free_irq(ltq_port->tx_irq, port); + return retval; +} + +static void free_irq_lantiq(struct uart_port *port) +{ + struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); + + free_irq(ltq_port->tx_irq, port); + free_irq(ltq_port->rx_irq, port); + free_irq(ltq_port->err_irq, port); +} + +static int fetch_irq_intel(struct device *dev, struct ltq_uart_port *ltq_port) +{ + struct uart_port *port = <q_port->port; + int ret; + + ret = of_irq_get(dev->of_node, 0); + if (ret < 0) { + dev_err(dev, "failed to fetch IRQ for serial port\n"); + return ret; + } + ltq_port->common_irq = ret; + port->irq = ret; + + return 0; +} + +static int request_irq_intel(struct uart_port *port) +{ + struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); + int retval; + + retval = request_irq(ltq_port->common_irq, lqasc_irq, 0, + "asc_irq", port); + if (retval) + dev_err(port->dev, "failed to request asc_irq\n"); + + return retval; +} + +static void free_irq_intel(struct uart_port *port) +{ + struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); + + free_irq(ltq_port->common_irq, port); +} + +static int lqasc_probe(struct platform_device *pdev) +{ + struct device_node *node = pdev->dev.of_node; + struct ltq_uart_port *ltq_port; + struct uart_port *port; + struct resource *mmres; + int line; + int ret; + + mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mmres) { + dev_err(&pdev->dev, + "failed to get memory for serial port\n"); + return -ENODEV; + } + + ltq_port = devm_kzalloc(&pdev->dev, sizeof(struct ltq_uart_port), + GFP_KERNEL); + if (!ltq_port) + return -ENOMEM; + + port = <q_port->port; + + ltq_port->soc = of_device_get_match_data(&pdev->dev); + ret = ltq_port->soc->fetch_irq(&pdev->dev, ltq_port); + if (ret) + return ret; + + /* get serial id */ + line = of_alias_get_id(node, "serial"); + if (line < 0) { + if (IS_ENABLED(CONFIG_LANTIQ)) { + if (mmres->start == CPHYSADDR(LTQ_EARLY_ASC)) + line = 0; + else + line = 1; + } else { + dev_err(&pdev->dev, "failed to get alias id, errno %d\n", + line); + return line; + } + } + + if (lqasc_port[line]) { + dev_err(&pdev->dev, "port %d already allocated\n", line); + return -EBUSY; + } + + port->iotype = SERIAL_IO_MEM; + port->flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP; + port->ops = &lqasc_pops; + port->fifosize = 16; + port->type = PORT_LTQ_ASC, + port->line = line; + port->dev = &pdev->dev; + /* unused, just to be backward-compatible */ + port->mapbase = mmres->start; + + if (IS_ENABLED(CONFIG_LANTIQ) && !IS_ENABLED(CONFIG_COMMON_CLK)) + ltq_port->freqclk = clk_get_fpi(); + else + ltq_port->freqclk = devm_clk_get(&pdev->dev, "freq"); + + + if (IS_ERR(ltq_port->freqclk)) { + pr_err("failed to get fpi clk\n"); + return -ENOENT; + } + + /* not all asc ports have clock gates, lets ignore the return code */ + if (IS_ENABLED(CONFIG_LANTIQ) && !IS_ENABLED(CONFIG_COMMON_CLK)) + ltq_port->clk = clk_get(&pdev->dev, NULL); + else + ltq_port->clk = devm_clk_get(&pdev->dev, "asc"); + + spin_lock_init(<q_port->lock); + lqasc_port[line] = ltq_port; + platform_set_drvdata(pdev, ltq_port); + + ret = uart_add_one_port(&lqasc_reg, port); + + return ret; +} + +static int lqasc_remove(struct platform_device *pdev) +{ + struct uart_port *port = platform_get_drvdata(pdev); + + return uart_remove_one_port(&lqasc_reg, port); +} + +static const struct ltq_soc_data soc_data_lantiq = { + .fetch_irq = fetch_irq_lantiq, + .request_irq = request_irq_lantiq, + .free_irq = free_irq_lantiq, +}; + +static const struct ltq_soc_data soc_data_intel = { + .fetch_irq = fetch_irq_intel, + .request_irq = request_irq_intel, + .free_irq = free_irq_intel, +}; + +static const struct of_device_id ltq_asc_match[] = { + { .compatible = "lantiq,asc", .data = &soc_data_lantiq }, + { .compatible = "intel,lgm-asc", .data = &soc_data_intel }, + {}, +}; +MODULE_DEVICE_TABLE(of, ltq_asc_match); + +static struct platform_driver lqasc_driver = { + .probe = lqasc_probe, + .remove = lqasc_remove, + .driver = { + .name = DRVNAME, + .of_match_table = ltq_asc_match, + }, +}; + +static int __init +init_lqasc(void) +{ + int ret; + + ret = uart_register_driver(&lqasc_reg); + if (ret != 0) + return ret; + + ret = platform_driver_register(&lqasc_driver); + if (ret != 0) + uart_unregister_driver(&lqasc_reg); + + return ret; +} + +static void __exit exit_lqasc(void) +{ + platform_driver_unregister(&lqasc_driver); + uart_unregister_driver(&lqasc_reg); +} + +module_init(init_lqasc); +module_exit(exit_lqasc); + +MODULE_DESCRIPTION("Serial driver for Lantiq & Intel gateway SoCs"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3