From 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 12:05:51 +0200 Subject: Adding upstream version 5.10.209. Signed-off-by: Daniel Baumann --- drivers/tty/Kconfig | 485 ++ drivers/tty/Makefile | 38 + drivers/tty/amiserial.c | 1723 ++++++ drivers/tty/cyclades.c | 4119 ++++++++++++++ drivers/tty/ehv_bytechan.c | 814 +++ drivers/tty/goldfish.c | 484 ++ drivers/tty/hvc/Kconfig | 115 + drivers/tty/hvc/Makefile | 13 + drivers/tty/hvc/hvc_console.c | 1069 ++++ drivers/tty/hvc/hvc_console.h | 113 + drivers/tty/hvc/hvc_dcc.c | 115 + drivers/tty/hvc/hvc_irq.c | 55 + drivers/tty/hvc/hvc_iucv.c | 1481 +++++ drivers/tty/hvc/hvc_opal.c | 419 ++ drivers/tty/hvc/hvc_riscv_sbi.c | 59 + drivers/tty/hvc/hvc_rtas.c | 110 + drivers/tty/hvc/hvc_udbg.c | 82 + drivers/tty/hvc/hvc_vio.c | 473 ++ drivers/tty/hvc/hvc_xen.c | 758 +++ drivers/tty/hvc/hvcs.c | 1600 ++++++ drivers/tty/hvc/hvsi.c | 1223 ++++ drivers/tty/hvc/hvsi_lib.c | 424 ++ drivers/tty/ipwireless/Makefile | 9 + drivers/tty/ipwireless/hardware.c | 1770 ++++++ drivers/tty/ipwireless/hardware.h | 63 + drivers/tty/ipwireless/main.c | 356 ++ drivers/tty/ipwireless/main.h | 69 + drivers/tty/ipwireless/network.c | 517 ++ drivers/tty/ipwireless/network.h | 54 + drivers/tty/ipwireless/setup_protocol.h | 109 + drivers/tty/ipwireless/tty.c | 635 +++ drivers/tty/ipwireless/tty.h | 46 + drivers/tty/isicom.c | 1699 ++++++ drivers/tty/mips_ejtag_fdc.c | 1272 +++++ drivers/tty/moxa.c | 2104 +++++++ drivers/tty/moxa.h | 307 + drivers/tty/mxser.c | 2815 +++++++++ drivers/tty/mxser.h | 151 + drivers/tty/n_gsm.c | 3477 ++++++++++++ drivers/tty/n_hdlc.c | 862 +++ drivers/tty/n_null.c | 69 + drivers/tty/n_r3964.c | 1284 +++++ drivers/tty/n_tracerouter.c | 235 + drivers/tty/n_tracesink.c | 230 + drivers/tty/n_tracesink.h | 26 + drivers/tty/n_tty.c | 2555 +++++++++ drivers/tty/nozomi.c | 1907 +++++++ drivers/tty/pty.c | 959 ++++ drivers/tty/rocket.c | 3127 ++++++++++ drivers/tty/rocket.h | 111 + drivers/tty/rocket_int.h | 1214 ++++ drivers/tty/serdev/Kconfig | 25 + drivers/tty/serdev/Makefile | 6 + drivers/tty/serdev/core.c | 845 +++ drivers/tty/serdev/serdev-ttyport.c | 318 ++ drivers/tty/serial/21285.c | 542 ++ drivers/tty/serial/8250/8250.h | 381 ++ drivers/tty/serial/8250/8250_accent.c | 35 + drivers/tty/serial/8250/8250_acorn.c | 138 + drivers/tty/serial/8250/8250_aspeed_vuart.c | 532 ++ drivers/tty/serial/8250/8250_bcm2835aux.c | 212 + drivers/tty/serial/8250/8250_boca.c | 49 + drivers/tty/serial/8250/8250_core.c | 1308 +++++ drivers/tty/serial/8250/8250_dma.c | 295 + drivers/tty/serial/8250/8250_dw.c | 743 +++ drivers/tty/serial/8250/8250_dwlib.c | 128 + drivers/tty/serial/8250/8250_dwlib.h | 19 + drivers/tty/serial/8250/8250_early.c | 221 + drivers/tty/serial/8250/8250_em.c | 163 + drivers/tty/serial/8250/8250_exar.c | 877 +++ drivers/tty/serial/8250/8250_exar_st16c554.c | 40 + drivers/tty/serial/8250/8250_fintek.c | 463 ++ drivers/tty/serial/8250/8250_fourport.c | 44 + drivers/tty/serial/8250/8250_fsl.c | 175 + drivers/tty/serial/8250/8250_gsc.c | 130 + drivers/tty/serial/8250/8250_hp300.c | 324 ++ drivers/tty/serial/8250/8250_hub6.c | 53 + drivers/tty/serial/8250/8250_ingenic.c | 355 ++ drivers/tty/serial/8250/8250_ioc3.c | 98 + drivers/tty/serial/8250/8250_lpc18xx.c | 224 + drivers/tty/serial/8250/8250_lpss.c | 426 ++ drivers/tty/serial/8250/8250_men_mcb.c | 177 + drivers/tty/serial/8250/8250_mid.c | 406 ++ drivers/tty/serial/8250/8250_mtk.c | 698 +++ drivers/tty/serial/8250/8250_of.c | 349 ++ drivers/tty/serial/8250/8250_omap.c | 1748 ++++++ drivers/tty/serial/8250/8250_pci.c | 5953 +++++++++++++++++++ drivers/tty/serial/8250/8250_pnp.c | 542 ++ drivers/tty/serial/8250/8250_port.c | 3436 +++++++++++ drivers/tty/serial/8250/8250_pxa.c | 191 + drivers/tty/serial/8250/8250_tegra.c | 200 + drivers/tty/serial/8250/8250_uniphier.c | 307 + drivers/tty/serial/8250/Kconfig | 522 ++ drivers/tty/serial/8250/Makefile | 43 + drivers/tty/serial/8250/serial_cs.c | 876 +++ drivers/tty/serial/Kconfig | 1589 ++++++ drivers/tty/serial/Makefile | 98 + drivers/tty/serial/altera_jtaguart.c | 525 ++ drivers/tty/serial/altera_uart.c | 675 +++ drivers/tty/serial/amba-pl010.c | 833 +++ drivers/tty/serial/amba-pl011.c | 2872 ++++++++++ drivers/tty/serial/amba-pl011.h | 35 + drivers/tty/serial/apbuart.c | 690 +++ drivers/tty/serial/apbuart.h | 65 + drivers/tty/serial/ar933x_uart.c | 893 +++ drivers/tty/serial/arc_uart.c | 686 +++ drivers/tty/serial/atmel_serial.c | 3025 ++++++++++ drivers/tty/serial/atmel_serial.h | 166 + drivers/tty/serial/bcm63xx_uart.c | 924 +++ drivers/tty/serial/clps711x.c | 562 ++ drivers/tty/serial/cpm_uart/Makefile | 12 + drivers/tty/serial/cpm_uart/cpm_uart.h | 143 + drivers/tty/serial/cpm_uart/cpm_uart_core.c | 1476 +++++ drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c | 122 + drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h | 33 + drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c | 157 + drivers/tty/serial/cpm_uart/cpm_uart_cpm2.h | 33 + drivers/tty/serial/digicolor-usart.c | 562 ++ drivers/tty/serial/dz.c | 945 +++ drivers/tty/serial/dz.h | 130 + drivers/tty/serial/earlycon-arm-semihost.c | 51 + drivers/tty/serial/earlycon-riscv-sbi.c | 31 + drivers/tty/serial/earlycon.c | 322 ++ drivers/tty/serial/efm32-uart.c | 852 +++ drivers/tty/serial/fsl_linflexuart.c | 938 +++ drivers/tty/serial/fsl_lpuart.c | 2871 ++++++++++ drivers/tty/serial/icom.c | 1649 ++++++ drivers/tty/serial/icom.h | 274 + drivers/tty/serial/ifx6x60.c | 1389 +++++ drivers/tty/serial/ifx6x60.h | 118 + drivers/tty/serial/imx.c | 2677 +++++++++ drivers/tty/serial/imx_earlycon.c | 50 + drivers/tty/serial/ip22zilog.c | 1223 ++++ drivers/tty/serial/ip22zilog.h | 282 + drivers/tty/serial/jsm/Makefile | 9 + drivers/tty/serial/jsm/jsm.h | 438 ++ drivers/tty/serial/jsm/jsm_cls.c | 973 ++++ drivers/tty/serial/jsm/jsm_driver.c | 384 ++ drivers/tty/serial/jsm/jsm_neo.c | 1406 +++++ drivers/tty/serial/jsm/jsm_tty.c | 823 +++ drivers/tty/serial/kgdb_nmi.c | 383 ++ drivers/tty/serial/kgdboc.c | 604 ++ drivers/tty/serial/lantiq.c | 973 ++++ drivers/tty/serial/lpc32xx_hs.c | 765 +++ drivers/tty/serial/max3100.c | 909 +++ drivers/tty/serial/max310x.c | 1551 +++++ drivers/tty/serial/mcf.c | 706 +++ drivers/tty/serial/men_z135_uart.c | 933 +++ drivers/tty/serial/meson_uart.c | 875 +++ drivers/tty/serial/milbeaut_usio.c | 611 ++ drivers/tty/serial/mpc52xx_uart.c | 1956 +++++++ drivers/tty/serial/mps2-uart.c | 655 +++ drivers/tty/serial/msm_serial.c | 1918 +++++++ drivers/tty/serial/mux.c | 609 ++ drivers/tty/serial/mvebu-uart.c | 1002 ++++ drivers/tty/serial/mxs-auart.c | 1814 ++++++ drivers/tty/serial/omap-serial.c | 1956 +++++++ drivers/tty/serial/owl-uart.c | 760 +++ drivers/tty/serial/pch_uart.c | 1968 +++++++ drivers/tty/serial/pic32_uart.c | 953 ++++ drivers/tty/serial/pic32_uart.h | 125 + drivers/tty/serial/pmac_zilog.c | 2058 +++++++ drivers/tty/serial/pmac_zilog.h | 384 ++ drivers/tty/serial/pnx8xxx_uart.c | 858 +++ drivers/tty/serial/pxa.c | 942 +++ drivers/tty/serial/qcom_geni_serial.c | 1595 ++++++ drivers/tty/serial/rda-uart.c | 831 +++ drivers/tty/serial/rp2.c | 866 +++ drivers/tty/serial/sa1100.c | 950 ++++ drivers/tty/serial/samsung_tty.c | 2746 +++++++++ drivers/tty/serial/sb1250-duart.c | 964 ++++ drivers/tty/serial/sc16is7xx.c | 1612 ++++++ drivers/tty/serial/sccnxp.c | 1068 ++++ drivers/tty/serial/serial-tegra.c | 1720 ++++++ drivers/tty/serial/serial_core.c | 3343 +++++++++++ drivers/tty/serial/serial_mctrl_gpio.c | 302 + drivers/tty/serial/serial_mctrl_gpio.h | 147 + drivers/tty/serial/serial_txx9.c | 1326 +++++ drivers/tty/serial/sh-sci.c | 3521 ++++++++++++ drivers/tty/serial/sh-sci.h | 176 + drivers/tty/serial/sifive.c | 1106 ++++ drivers/tty/serial/sirfsoc_uart.c | 1503 +++++ drivers/tty/serial/sirfsoc_uart.h | 447 ++ drivers/tty/serial/sprd_serial.c | 1298 +++++ drivers/tty/serial/st-asc.c | 1010 ++++ drivers/tty/serial/stm32-usart.c | 1637 ++++++ drivers/tty/serial/stm32-usart.h | 278 + drivers/tty/serial/suncore.c | 244 + drivers/tty/serial/sunhv.c | 652 +++ drivers/tty/serial/sunsab.c | 1165 ++++ drivers/tty/serial/sunsab.h | 323 ++ drivers/tty/serial/sunsu.c | 1632 ++++++ drivers/tty/serial/sunzilog.c | 1651 ++++++ drivers/tty/serial/sunzilog.h | 290 + drivers/tty/serial/tegra-tcu.c | 298 + drivers/tty/serial/timbuart.c | 504 ++ drivers/tty/serial/timbuart.h | 46 + drivers/tty/serial/uartlite.c | 843 +++ drivers/tty/serial/ucc_uart.c | 1551 +++++ drivers/tty/serial/vr41xx_siu.c | 947 +++ drivers/tty/serial/vt8500_serial.c | 745 +++ drivers/tty/serial/xilinx_uartps.c | 1697 ++++++ drivers/tty/serial/zs.c | 1307 +++++ drivers/tty/serial/zs.h | 285 + drivers/tty/synclink.c | 7898 ++++++++++++++++++++++++++ drivers/tty/synclink_gt.c | 5076 +++++++++++++++++ drivers/tty/synclinkmp.c | 5579 ++++++++++++++++++ drivers/tty/sysrq.c | 1198 ++++ drivers/tty/tty.h | 117 + drivers/tty/tty_audit.c | 248 + drivers/tty/tty_baudrate.c | 238 + drivers/tty/tty_buffer.c | 645 +++ drivers/tty/tty_io.c | 3608 ++++++++++++ drivers/tty/tty_ioctl.c | 908 +++ drivers/tty/tty_jobctrl.c | 579 ++ drivers/tty/tty_ldisc.c | 887 +++ drivers/tty/tty_ldsem.c | 430 ++ drivers/tty/tty_mutex.c | 61 + drivers/tty/tty_port.c | 702 +++ drivers/tty/ttynull.c | 109 + drivers/tty/vcc.c | 1154 ++++ drivers/tty/vt/.gitignore | 4 + drivers/tty/vt/Makefile | 35 + drivers/tty/vt/conmakehash.c | 290 + drivers/tty/vt/consolemap.c | 857 +++ drivers/tty/vt/cp437.uni | 292 + drivers/tty/vt/defkeymap.c_shipped | 263 + drivers/tty/vt/defkeymap.map | 358 ++ drivers/tty/vt/keyboard.c | 2305 ++++++++ drivers/tty/vt/selection.c | 420 ++ drivers/tty/vt/vc_screen.c | 822 +++ drivers/tty/vt/vt.c | 4861 ++++++++++++++++ drivers/tty/vt/vt_ioctl.c | 1322 +++++ 233 files changed, 212592 insertions(+) create mode 100644 drivers/tty/Kconfig create mode 100644 drivers/tty/Makefile create mode 100644 drivers/tty/amiserial.c create mode 100644 drivers/tty/cyclades.c create mode 100644 drivers/tty/ehv_bytechan.c create mode 100644 drivers/tty/goldfish.c create mode 100644 drivers/tty/hvc/Kconfig create mode 100644 drivers/tty/hvc/Makefile create mode 100644 drivers/tty/hvc/hvc_console.c create mode 100644 drivers/tty/hvc/hvc_console.h create mode 100644 drivers/tty/hvc/hvc_dcc.c create mode 100644 drivers/tty/hvc/hvc_irq.c create mode 100644 drivers/tty/hvc/hvc_iucv.c create mode 100644 drivers/tty/hvc/hvc_opal.c create mode 100644 drivers/tty/hvc/hvc_riscv_sbi.c create mode 100644 drivers/tty/hvc/hvc_rtas.c create mode 100644 drivers/tty/hvc/hvc_udbg.c create mode 100644 drivers/tty/hvc/hvc_vio.c create mode 100644 drivers/tty/hvc/hvc_xen.c create mode 100644 drivers/tty/hvc/hvcs.c create mode 100644 drivers/tty/hvc/hvsi.c create mode 100644 drivers/tty/hvc/hvsi_lib.c create mode 100644 drivers/tty/ipwireless/Makefile create mode 100644 drivers/tty/ipwireless/hardware.c create mode 100644 drivers/tty/ipwireless/hardware.h create mode 100644 drivers/tty/ipwireless/main.c create mode 100644 drivers/tty/ipwireless/main.h create mode 100644 drivers/tty/ipwireless/network.c create mode 100644 drivers/tty/ipwireless/network.h create mode 100644 drivers/tty/ipwireless/setup_protocol.h create mode 100644 drivers/tty/ipwireless/tty.c create mode 100644 drivers/tty/ipwireless/tty.h create mode 100644 drivers/tty/isicom.c create mode 100644 drivers/tty/mips_ejtag_fdc.c create mode 100644 drivers/tty/moxa.c create mode 100644 drivers/tty/moxa.h create mode 100644 drivers/tty/mxser.c create mode 100644 drivers/tty/mxser.h create mode 100644 drivers/tty/n_gsm.c create mode 100644 drivers/tty/n_hdlc.c create mode 100644 drivers/tty/n_null.c create mode 100644 drivers/tty/n_r3964.c create mode 100644 drivers/tty/n_tracerouter.c create mode 100644 drivers/tty/n_tracesink.c create mode 100644 drivers/tty/n_tracesink.h create mode 100644 drivers/tty/n_tty.c create mode 100644 drivers/tty/nozomi.c create mode 100644 drivers/tty/pty.c create mode 100644 drivers/tty/rocket.c create mode 100644 drivers/tty/rocket.h create mode 100644 drivers/tty/rocket_int.h create mode 100644 drivers/tty/serdev/Kconfig create mode 100644 drivers/tty/serdev/Makefile create mode 100644 drivers/tty/serdev/core.c create mode 100644 drivers/tty/serdev/serdev-ttyport.c create mode 100644 drivers/tty/serial/21285.c create mode 100644 drivers/tty/serial/8250/8250.h create mode 100644 drivers/tty/serial/8250/8250_accent.c create mode 100644 drivers/tty/serial/8250/8250_acorn.c create mode 100644 drivers/tty/serial/8250/8250_aspeed_vuart.c create mode 100644 drivers/tty/serial/8250/8250_bcm2835aux.c create mode 100644 drivers/tty/serial/8250/8250_boca.c create mode 100644 drivers/tty/serial/8250/8250_core.c create mode 100644 drivers/tty/serial/8250/8250_dma.c create mode 100644 drivers/tty/serial/8250/8250_dw.c create mode 100644 drivers/tty/serial/8250/8250_dwlib.c create mode 100644 drivers/tty/serial/8250/8250_dwlib.h create mode 100644 drivers/tty/serial/8250/8250_early.c create mode 100644 drivers/tty/serial/8250/8250_em.c create mode 100644 drivers/tty/serial/8250/8250_exar.c create mode 100644 drivers/tty/serial/8250/8250_exar_st16c554.c create mode 100644 drivers/tty/serial/8250/8250_fintek.c create mode 100644 drivers/tty/serial/8250/8250_fourport.c create mode 100644 drivers/tty/serial/8250/8250_fsl.c create mode 100644 drivers/tty/serial/8250/8250_gsc.c create mode 100644 drivers/tty/serial/8250/8250_hp300.c create mode 100644 drivers/tty/serial/8250/8250_hub6.c create mode 100644 drivers/tty/serial/8250/8250_ingenic.c create mode 100644 drivers/tty/serial/8250/8250_ioc3.c create mode 100644 drivers/tty/serial/8250/8250_lpc18xx.c create mode 100644 drivers/tty/serial/8250/8250_lpss.c create mode 100644 drivers/tty/serial/8250/8250_men_mcb.c create mode 100644 drivers/tty/serial/8250/8250_mid.c create mode 100644 drivers/tty/serial/8250/8250_mtk.c create mode 100644 drivers/tty/serial/8250/8250_of.c create mode 100644 drivers/tty/serial/8250/8250_omap.c create mode 100644 drivers/tty/serial/8250/8250_pci.c create mode 100644 drivers/tty/serial/8250/8250_pnp.c create mode 100644 drivers/tty/serial/8250/8250_port.c create mode 100644 drivers/tty/serial/8250/8250_pxa.c create mode 100644 drivers/tty/serial/8250/8250_tegra.c create mode 100644 drivers/tty/serial/8250/8250_uniphier.c create mode 100644 drivers/tty/serial/8250/Kconfig create mode 100644 drivers/tty/serial/8250/Makefile create mode 100644 drivers/tty/serial/8250/serial_cs.c create mode 100644 drivers/tty/serial/Kconfig create mode 100644 drivers/tty/serial/Makefile create mode 100644 drivers/tty/serial/altera_jtaguart.c create mode 100644 drivers/tty/serial/altera_uart.c create mode 100644 drivers/tty/serial/amba-pl010.c create mode 100644 drivers/tty/serial/amba-pl011.c create mode 100644 drivers/tty/serial/amba-pl011.h create mode 100644 drivers/tty/serial/apbuart.c create mode 100644 drivers/tty/serial/apbuart.h create mode 100644 drivers/tty/serial/ar933x_uart.c create mode 100644 drivers/tty/serial/arc_uart.c create mode 100644 drivers/tty/serial/atmel_serial.c create mode 100644 drivers/tty/serial/atmel_serial.h create mode 100644 drivers/tty/serial/bcm63xx_uart.c create mode 100644 drivers/tty/serial/clps711x.c create mode 100644 drivers/tty/serial/cpm_uart/Makefile create mode 100644 drivers/tty/serial/cpm_uart/cpm_uart.h create mode 100644 drivers/tty/serial/cpm_uart/cpm_uart_core.c create mode 100644 drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c create mode 100644 drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h create mode 100644 drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c create mode 100644 drivers/tty/serial/cpm_uart/cpm_uart_cpm2.h create mode 100644 drivers/tty/serial/digicolor-usart.c create mode 100644 drivers/tty/serial/dz.c create mode 100644 drivers/tty/serial/dz.h create mode 100644 drivers/tty/serial/earlycon-arm-semihost.c create mode 100644 drivers/tty/serial/earlycon-riscv-sbi.c create mode 100644 drivers/tty/serial/earlycon.c create mode 100644 drivers/tty/serial/efm32-uart.c create mode 100644 drivers/tty/serial/fsl_linflexuart.c create mode 100644 drivers/tty/serial/fsl_lpuart.c create mode 100644 drivers/tty/serial/icom.c create mode 100644 drivers/tty/serial/icom.h create mode 100644 drivers/tty/serial/ifx6x60.c create mode 100644 drivers/tty/serial/ifx6x60.h create mode 100644 drivers/tty/serial/imx.c create mode 100644 drivers/tty/serial/imx_earlycon.c create mode 100644 drivers/tty/serial/ip22zilog.c create mode 100644 drivers/tty/serial/ip22zilog.h create mode 100644 drivers/tty/serial/jsm/Makefile create mode 100644 drivers/tty/serial/jsm/jsm.h create mode 100644 drivers/tty/serial/jsm/jsm_cls.c create mode 100644 drivers/tty/serial/jsm/jsm_driver.c create mode 100644 drivers/tty/serial/jsm/jsm_neo.c create mode 100644 drivers/tty/serial/jsm/jsm_tty.c create mode 100644 drivers/tty/serial/kgdb_nmi.c create mode 100644 drivers/tty/serial/kgdboc.c create mode 100644 drivers/tty/serial/lantiq.c create mode 100644 drivers/tty/serial/lpc32xx_hs.c create mode 100644 drivers/tty/serial/max3100.c create mode 100644 drivers/tty/serial/max310x.c create mode 100644 drivers/tty/serial/mcf.c create mode 100644 drivers/tty/serial/men_z135_uart.c create mode 100644 drivers/tty/serial/meson_uart.c create mode 100644 drivers/tty/serial/milbeaut_usio.c create mode 100644 drivers/tty/serial/mpc52xx_uart.c create mode 100644 drivers/tty/serial/mps2-uart.c create mode 100644 drivers/tty/serial/msm_serial.c create mode 100644 drivers/tty/serial/mux.c create mode 100644 drivers/tty/serial/mvebu-uart.c create mode 100644 drivers/tty/serial/mxs-auart.c create mode 100644 drivers/tty/serial/omap-serial.c create mode 100644 drivers/tty/serial/owl-uart.c create mode 100644 drivers/tty/serial/pch_uart.c create mode 100644 drivers/tty/serial/pic32_uart.c create mode 100644 drivers/tty/serial/pic32_uart.h create mode 100644 drivers/tty/serial/pmac_zilog.c create mode 100644 drivers/tty/serial/pmac_zilog.h create mode 100644 drivers/tty/serial/pnx8xxx_uart.c create mode 100644 drivers/tty/serial/pxa.c create mode 100644 drivers/tty/serial/qcom_geni_serial.c create mode 100644 drivers/tty/serial/rda-uart.c create mode 100644 drivers/tty/serial/rp2.c create mode 100644 drivers/tty/serial/sa1100.c create mode 100644 drivers/tty/serial/samsung_tty.c create mode 100644 drivers/tty/serial/sb1250-duart.c create mode 100644 drivers/tty/serial/sc16is7xx.c create mode 100644 drivers/tty/serial/sccnxp.c create mode 100644 drivers/tty/serial/serial-tegra.c create mode 100644 drivers/tty/serial/serial_core.c create mode 100644 drivers/tty/serial/serial_mctrl_gpio.c create mode 100644 drivers/tty/serial/serial_mctrl_gpio.h create mode 100644 drivers/tty/serial/serial_txx9.c create mode 100644 drivers/tty/serial/sh-sci.c create mode 100644 drivers/tty/serial/sh-sci.h create mode 100644 drivers/tty/serial/sifive.c create mode 100644 drivers/tty/serial/sirfsoc_uart.c create mode 100644 drivers/tty/serial/sirfsoc_uart.h create mode 100644 drivers/tty/serial/sprd_serial.c create mode 100644 drivers/tty/serial/st-asc.c create mode 100644 drivers/tty/serial/stm32-usart.c create mode 100644 drivers/tty/serial/stm32-usart.h create mode 100644 drivers/tty/serial/suncore.c create mode 100644 drivers/tty/serial/sunhv.c create mode 100644 drivers/tty/serial/sunsab.c create mode 100644 drivers/tty/serial/sunsab.h create mode 100644 drivers/tty/serial/sunsu.c create mode 100644 drivers/tty/serial/sunzilog.c create mode 100644 drivers/tty/serial/sunzilog.h create mode 100644 drivers/tty/serial/tegra-tcu.c create mode 100644 drivers/tty/serial/timbuart.c create mode 100644 drivers/tty/serial/timbuart.h create mode 100644 drivers/tty/serial/uartlite.c create mode 100644 drivers/tty/serial/ucc_uart.c create mode 100644 drivers/tty/serial/vr41xx_siu.c create mode 100644 drivers/tty/serial/vt8500_serial.c create mode 100644 drivers/tty/serial/xilinx_uartps.c create mode 100644 drivers/tty/serial/zs.c create mode 100644 drivers/tty/serial/zs.h create mode 100644 drivers/tty/synclink.c create mode 100644 drivers/tty/synclink_gt.c create mode 100644 drivers/tty/synclinkmp.c create mode 100644 drivers/tty/sysrq.c create mode 100644 drivers/tty/tty.h create mode 100644 drivers/tty/tty_audit.c create mode 100644 drivers/tty/tty_baudrate.c create mode 100644 drivers/tty/tty_buffer.c create mode 100644 drivers/tty/tty_io.c create mode 100644 drivers/tty/tty_ioctl.c create mode 100644 drivers/tty/tty_jobctrl.c create mode 100644 drivers/tty/tty_ldisc.c create mode 100644 drivers/tty/tty_ldsem.c create mode 100644 drivers/tty/tty_mutex.c create mode 100644 drivers/tty/tty_port.c create mode 100644 drivers/tty/ttynull.c create mode 100644 drivers/tty/vcc.c create mode 100644 drivers/tty/vt/.gitignore create mode 100644 drivers/tty/vt/Makefile create mode 100644 drivers/tty/vt/conmakehash.c create mode 100644 drivers/tty/vt/consolemap.c create mode 100644 drivers/tty/vt/cp437.uni create mode 100644 drivers/tty/vt/defkeymap.c_shipped create mode 100644 drivers/tty/vt/defkeymap.map create mode 100644 drivers/tty/vt/keyboard.c create mode 100644 drivers/tty/vt/selection.c create mode 100644 drivers/tty/vt/vc_screen.c create mode 100644 drivers/tty/vt/vt.c create mode 100644 drivers/tty/vt/vt_ioctl.c (limited to 'drivers/tty') diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig new file mode 100644 index 000000000..93fd984eb --- /dev/null +++ b/drivers/tty/Kconfig @@ -0,0 +1,485 @@ +# SPDX-License-Identifier: GPL-2.0 +config TTY + bool "Enable TTY" if EXPERT + default y + help + Allows you to remove TTY support which can save space, and + blocks features that require TTY from inclusion in the kernel. + TTY is required for any text terminals or serial port + communication. Most users should leave this enabled. + +if TTY + +config VT + bool "Virtual terminal" if EXPERT + depends on !UML + select INPUT + default y + help + If you say Y here, you will get support for terminal devices with + display and keyboard devices. These are called "virtual" because you + can run several virtual terminals (also called virtual consoles) on + one physical terminal. This is rather useful, for example one + virtual terminal can collect system messages and warnings, another + one can be used for a text-mode user session, and a third could run + an X session, all in parallel. Switching between virtual terminals + is done with certain key combinations, usually Alt-. + + The setterm command ("man setterm") can be used to change the + properties (such as colors or beeping) of a virtual terminal. The + man page console_codes(4) ("man console_codes") contains the special + character sequences that can be used to change those properties + directly. The fonts used on virtual terminals can be changed with + the setfont ("man setfont") command and the key bindings are defined + with the loadkeys ("man loadkeys") command. + + You need at least one virtual terminal device in order to make use + of your keyboard and monitor. Therefore, only people configuring an + embedded system would want to say N here in order to save some + memory; the only way to log into such a system is then via a serial + or network connection. + + If unsure, say Y, or else you won't be able to do much with your new + shiny Linux system :-) + +config CONSOLE_TRANSLATIONS + depends on VT + default y + bool "Enable character translations in console" if EXPERT + help + This enables support for font mapping and Unicode translation + on virtual consoles. + +config VT_CONSOLE + bool "Support for console on virtual terminal" if EXPERT + depends on VT + default y + help + The system console is the device which receives all kernel messages + and warnings and which allows logins in single user mode. If you + answer Y here, a virtual terminal (the device used to interact with + a physical terminal) can be used as system console. This is the most + common mode of operations, so you should say Y here unless you want + the kernel messages be output only to a serial port (in which case + you should say Y to "Console on serial port", below). + + If you do say Y here, by default the currently visible virtual + terminal (/dev/tty0) will be used as system console. You can change + that with a kernel command line option such as "console=tty3" which + would use the third virtual terminal as system console. (Try "man + bootparam" or see the documentation of your boot loader (lilo or + loadlin) about how to pass options to the kernel at boot time.) + + If unsure, say Y. + +config VT_CONSOLE_SLEEP + def_bool y + depends on VT_CONSOLE && PM_SLEEP + +config HW_CONSOLE + bool + depends on VT && !UML + default y + +config VT_HW_CONSOLE_BINDING + bool "Support for binding and unbinding console drivers" + depends on HW_CONSOLE + help + The virtual terminal is the device that interacts with the physical + terminal through console drivers. On these systems, at least one + console driver is loaded. In other configurations, additional console + drivers may be enabled, such as the framebuffer console. If more than + 1 console driver is enabled, setting this to 'y' will allow you to + select the console driver that will serve as the backend for the + virtual terminals. + + See for more + information. For framebuffer console users, please refer to + . + +config UNIX98_PTYS + bool "Unix98 PTY support" if EXPERT + default y + help + A pseudo terminal (PTY) is a software device consisting of two + halves: a master and a slave. The slave device behaves identical to + a physical terminal; the master device is used by a process to + read data from and write data to the slave, thereby emulating a + terminal. Typical programs for the master side are telnet servers + and xterms. + + Linux has traditionally used the BSD-like names /dev/ptyxx for + masters and /dev/ttyxx for slaves of pseudo terminals. This scheme + has a number of problems. The GNU C library glibc 2.1 and later, + however, supports the Unix98 naming standard: in order to acquire a + pseudo terminal, a process opens /dev/ptmx; the number of the pseudo + terminal is then made available to the process and the pseudo + terminal slave can be accessed as /dev/pts/. What was + traditionally /dev/ttyp2 will then be /dev/pts/2, for example. + + All modern Linux systems use the Unix98 ptys. Say Y unless + you're on an embedded system and want to conserve memory. + +config LEGACY_PTYS + bool "Legacy (BSD) PTY support" + default y + help + A pseudo terminal (PTY) is a software device consisting of two + halves: a master and a slave. The slave device behaves identical to + a physical terminal; the master device is used by a process to + read data from and write data to the slave, thereby emulating a + terminal. Typical programs for the master side are telnet servers + and xterms. + + Linux has traditionally used the BSD-like names /dev/ptyxx + for masters and /dev/ttyxx for slaves of pseudo + terminals. This scheme has a number of problems, including + security. This option enables these legacy devices; on most + systems, it is safe to say N. + +config LEGACY_PTY_COUNT + int "Maximum number of legacy PTY in use" + depends on LEGACY_PTYS + range 0 256 + default "256" + help + The maximum number of legacy PTYs that can be used at any one time. + The default is 256, and should be more than enough. Embedded + systems may want to reduce this to save memory. + + When not in use, each legacy PTY occupies 12 bytes on 32-bit + architectures and 24 bytes on 64-bit architectures. + +config LDISC_AUTOLOAD + bool "Automatically load TTY Line Disciplines" + default y + help + Historically the kernel has always automatically loaded any + line discipline that is in a kernel module when a user asks + for it to be loaded with the TIOCSETD ioctl, or through other + means. This is not always the best thing to do on systems + where you know you will not be using some of the more + "ancient" line disciplines, so prevent the kernel from doing + this unless the request is coming from a process with the + CAP_SYS_MODULE permissions. + + Say 'Y' here if you trust your userspace users to do the right + thing, or if you have only provided the line disciplines that + you know you will be using, or if you wish to continue to use + the traditional method of on-demand loading of these modules + by any user. + + This functionality can be changed at runtime with the + dev.tty.ldisc_autoload sysctl, this configuration option will + only set the default value of this functionality. + +source "drivers/tty/serial/Kconfig" + +config SERIAL_NONSTANDARD + bool "Non-standard serial port support" + depends on HAS_IOMEM + help + Say Y here if you have any non-standard serial boards -- boards + which aren't supported using the standard "dumb" serial driver. + This includes intelligent serial boards such as Cyclades, + Digiboards, etc. These are usually used for systems that need many + serial ports because they serve many terminals or dial-in + connections. + + Note that the answer to this question won't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about non-standard serial boards. + + Most people can say N here. + +config ROCKETPORT + tristate "Comtrol RocketPort support" + depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI) + help + This driver supports Comtrol RocketPort and RocketModem PCI boards. + These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or + modems. For information about the RocketPort/RocketModem boards + and this driver read . + + To compile this driver as a module, choose M here: the + module will be called rocket. + + If you want to compile this driver into the kernel, say Y here. If + you don't have a Comtrol RocketPort/RocketModem card installed, say N. + +config CYCLADES + tristate "Cyclades async mux support" + depends on SERIAL_NONSTANDARD && (PCI || ISA) + select FW_LOADER + help + This driver supports Cyclades Z and Y multiserial boards. + You would need something like this to connect more than two modems to + your Linux box, for instance in order to become a dial-in server. + + For information about the Cyclades-Z card, read + . + + To compile this driver as a module, choose M here: the + module will be called cyclades. + + If you haven't heard about it, it's safe to say N. + +config CYZ_INTR + bool "Cyclades-Z interrupt mode operation" + depends on CYCLADES && PCI + help + The Cyclades-Z family of multiport cards allows 2 (two) driver op + modes: polling and interrupt. In polling mode, the driver will check + the status of the Cyclades-Z ports every certain amount of time + (which is called polling cycle and is configurable). In interrupt + mode, it will use an interrupt line (IRQ) in order to check the + status of the Cyclades-Z ports. The default op mode is polling. If + unsure, say N. + +config MOXA_INTELLIO + tristate "Moxa Intellio support" + depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI) + select FW_LOADER + help + Say Y here if you have a Moxa Intellio multiport serial card. + + To compile this driver as a module, choose M here: the + module will be called moxa. + +config MOXA_SMARTIO + tristate "Moxa SmartIO support v. 2.0" + depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA) + help + Say Y here if you have a Moxa SmartIO multiport serial card and/or + want to help develop a new version of this driver. + + This is upgraded (1.9.1) driver from original Moxa drivers with + changes finally resulting in PCI probing. + + This driver can also be built as a module. The module will be called + mxser. If you want to do that, say M here. + +config SYNCLINK + tristate "Microgate SyncLink card support" + depends on SERIAL_NONSTANDARD && PCI && ISA_DMA_API + help + Provides support for the SyncLink ISA and PCI multiprotocol serial + adapters. These adapters support asynchronous and HDLC bit + synchronous communication up to 10Mbps (PCI adapter). + + This driver can only be built as a module ( = code which can be + inserted in and removed from the running kernel whenever you want). + The module will be called synclink. If you want to do that, say M + here. + +config SYNCLINKMP + tristate "SyncLink Multiport support" + depends on SERIAL_NONSTANDARD && PCI + help + Enable support for the SyncLink Multiport (2 or 4 ports) + serial adapter, running asynchronous and HDLC communications up + to 2.048Mbps. Each ports is independently selectable for + RS-232, V.35, RS-449, RS-530, and X.21 + + This driver may be built as a module ( = code which can be + inserted in and removed from the running kernel whenever you want). + The module will be called synclinkmp. If you want to do that, say M + here. + +config SYNCLINK_GT + tristate "SyncLink GT/AC support" + depends on SERIAL_NONSTANDARD && PCI + help + Support for SyncLink GT and SyncLink AC families of + synchronous and asynchronous serial adapters + manufactured by Microgate Systems, Ltd. (www.microgate.com) + +config ISI + tristate "Multi-Tech multiport card support" + depends on SERIAL_NONSTANDARD && PCI + select FW_LOADER + help + This is a driver for the Multi-Tech cards which provide several + serial ports. The driver is experimental and can currently only be + built as a module. The module will be called isicom. + If you want to do that, choose M here. + +config N_HDLC + tristate "HDLC line discipline support" + depends on SERIAL_NONSTANDARD + help + Allows synchronous HDLC communications with tty device drivers that + support synchronous HDLC such as the Microgate SyncLink adapter. + + This driver can be built as a module ( = code which can be + inserted in and removed from the running kernel whenever you want). + The module will be called n_hdlc. If you want to do that, say M + here. + +config PPC_EPAPR_HV_BYTECHAN + bool "ePAPR hypervisor byte channel driver" + depends on PPC + select EPAPR_PARAVIRT + help + This driver creates /dev entries for each ePAPR hypervisor byte + channel, thereby allowing applications to communicate with byte + channels as if they were serial ports. + +config PPC_EARLY_DEBUG_EHV_BC + bool "Early console (udbg) support for ePAPR hypervisors" + depends on PPC_EPAPR_HV_BYTECHAN=y + help + Select this option to enable early console (a.k.a. "udbg") support + via an ePAPR byte channel. You also need to choose the byte channel + handle below. + +config PPC_EARLY_DEBUG_EHV_BC_HANDLE + int "Byte channel handle for early console (udbg)" + depends on PPC_EARLY_DEBUG_EHV_BC + default 0 + help + If you want early console (udbg) output through a byte channel, + specify the handle of the byte channel to use. + + For this to work, the byte channel driver must be compiled + in-kernel, not as a module. + + Note that only one early console driver can be enabled, so don't + enable any others if you enable this one. + + If the number you specify is not a valid byte channel handle, then + there simply will be no early console output. This is true also + if you don't boot under a hypervisor at all. + +config GOLDFISH_TTY + tristate "Goldfish TTY Driver" + depends on GOLDFISH + select SERIAL_CORE + select SERIAL_CORE_CONSOLE + help + Console and system TTY driver for the Goldfish virtual platform. + +config GOLDFISH_TTY_EARLY_CONSOLE + bool + default y if GOLDFISH_TTY=y + select SERIAL_EARLYCON + +config N_GSM + tristate "GSM MUX line discipline support (EXPERIMENTAL)" + depends on NET + help + This line discipline provides support for the GSM MUX protocol and + presents the mux as a set of 61 individual tty devices. + +config NOZOMI + tristate "HSDPA Broadband Wireless Data Card - Globe Trotter" + depends on PCI + help + If you have a HSDPA driver Broadband Wireless Data Card - + Globe Trotter PCMCIA card, say Y here. + + To compile this driver as a module, choose M here, the module + will be called nozomi. + +config MIPS_EJTAG_FDC_TTY + bool "MIPS EJTAG Fast Debug Channel TTY" + depends on MIPS_CDMM + help + This enables a TTY and console on the MIPS EJTAG Fast Debug Channels, + if they are present. This can be useful when working with an EJTAG + probe which supports it, to get console output and a login prompt via + EJTAG without needing to connect a serial cable. + + TTY devices are named e.g. ttyFDC3c2 (for FDC channel 2 of the FDC on + CPU3). + + The console can be enabled with console=fdc1 (for FDC channel 1 on all + CPUs). Do not use the console unless there is a debug probe attached + to drain the FDC TX FIFO. + + If unsure, say N. + +config MIPS_EJTAG_FDC_EARLYCON + bool "Early FDC console" + depends on MIPS_EJTAG_FDC_TTY + help + This registers a console on FDC channel 1 very early during boot (from + MIPS arch code). This is useful for bring-up and debugging early boot + issues. + + Do not enable unless there is a debug probe attached to drain the FDC + TX FIFO. + + If unsure, say N. + +config MIPS_EJTAG_FDC_KGDB + bool "Use KGDB over an FDC channel" + depends on MIPS_EJTAG_FDC_TTY && KGDB + default y + help + This enables the use of KGDB over an FDC channel, allowing KGDB to be + used remotely or when a serial port isn't available. + +config MIPS_EJTAG_FDC_KGDB_CHAN + int "KGDB FDC channel" + depends on MIPS_EJTAG_FDC_KGDB + range 2 15 + default 3 + help + FDC channel number to use for KGDB. + +config NULL_TTY + tristate "NULL TTY driver" + help + Say Y here if you want a NULL TTY which simply discards messages. + + This is useful to allow userspace applications which expect a console + device to work without modifications even when no console is + available or desired. + + In order to use this driver, you should redirect the console to this + TTY, or boot the kernel with console=ttynull. + + If unsure, say N. + +config TRACE_ROUTER + tristate "Trace data router for MIPI P1149.7 cJTAG standard" + depends on TRACE_SINK + help + The trace router uses the Linux tty line discipline framework to + route trace data coming from a tty port (say UART for example) to + the trace sink line discipline driver and to another tty port (say + USB). This is part of a solution for the MIPI P1149.7, compact JTAG, + standard, which is for debugging mobile devices. The PTI driver in + drivers/misc/pti.c defines the majority of this MIPI solution. + + You should select this driver if the target kernel is meant for + a mobile device containing a modem. Then you will need to select + "Trace data sink for MIPI P1149.7 cJTAG standard" line discipline + driver. + +config TRACE_SINK + tristate "Trace data sink for MIPI P1149.7 cJTAG standard" + help + The trace sink uses the Linux line discipline framework to receive + trace data coming from the trace router line discipline driver + to a user-defined tty port target, like USB. + This is to provide a way to extract modem trace data on + devices that do not have a PTI HW module, or just need modem + trace data to come out of a different HW output port. + This is part of a solution for the P1149.7, compact JTAG, standard. + + If you select this option, you need to select + "Trace data router for MIPI P1149.7 cJTAG standard". + +config VCC + tristate "Sun Virtual Console Concentrator" + depends on SUN_LDOMS + help + Support for Sun logical domain consoles. + +source "drivers/tty/hvc/Kconfig" + +endif # TTY + +source "drivers/tty/serdev/Kconfig" diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile new file mode 100644 index 000000000..020b1cd92 --- /dev/null +++ b/drivers/tty/Makefile @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: GPL-2.0 +obj-$(CONFIG_TTY) += tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o \ + tty_buffer.o tty_port.o tty_mutex.o \ + tty_ldsem.o tty_baudrate.o tty_jobctrl.o \ + n_null.o +obj-$(CONFIG_LEGACY_PTYS) += pty.o +obj-$(CONFIG_UNIX98_PTYS) += pty.o +obj-$(CONFIG_AUDIT) += tty_audit.o +obj-$(CONFIG_MAGIC_SYSRQ) += sysrq.o +obj-$(CONFIG_N_HDLC) += n_hdlc.o +obj-$(CONFIG_N_GSM) += n_gsm.o +obj-$(CONFIG_TRACE_ROUTER) += n_tracerouter.o +obj-$(CONFIG_TRACE_SINK) += n_tracesink.o +obj-$(CONFIG_R3964) += n_r3964.o + +obj-y += vt/ +obj-$(CONFIG_HVC_DRIVER) += hvc/ +obj-y += serial/ +obj-$(CONFIG_SERIAL_DEV_BUS) += serdev/ + +# tty drivers +obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o +obj-$(CONFIG_CYCLADES) += cyclades.o +obj-$(CONFIG_ISI) += isicom.o +obj-$(CONFIG_MOXA_INTELLIO) += moxa.o +obj-$(CONFIG_MOXA_SMARTIO) += mxser.o +obj-$(CONFIG_NOZOMI) += nozomi.o +obj-$(CONFIG_NULL_TTY) += ttynull.o +obj-$(CONFIG_ROCKETPORT) += rocket.o +obj-$(CONFIG_SYNCLINK_GT) += synclink_gt.o +obj-$(CONFIG_SYNCLINKMP) += synclinkmp.o +obj-$(CONFIG_SYNCLINK) += synclink.o +obj-$(CONFIG_PPC_EPAPR_HV_BYTECHAN) += ehv_bytechan.o +obj-$(CONFIG_GOLDFISH_TTY) += goldfish.o +obj-$(CONFIG_MIPS_EJTAG_FDC_TTY) += mips_ejtag_fdc.o +obj-$(CONFIG_VCC) += vcc.o + +obj-y += ipwireless/ diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c new file mode 100644 index 000000000..f60db967b --- /dev/null +++ b/drivers/tty/amiserial.c @@ -0,0 +1,1723 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Serial driver for the amiga builtin port. + * + * This code was created by taking serial.c version 4.30 from kernel + * release 2.3.22, replacing all hardware related stuff with the + * corresponding amiga hardware actions, and removing all irrelevant + * code. As a consequence, it uses many of the constants and names + * associated with the registers and bits of 16550 compatible UARTS - + * but only to keep track of status, etc in the state variables. It + * was done this was to make it easier to keep the code in line with + * (non hardware specific) changes to serial.c. + * + * The port is registered with the tty driver as minor device 64, and + * therefore other ports should should only use 65 upwards. + * + * Richard Lucock 28/12/99 + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, + * 1998, 1999 Theodore Ts'o + * + */ + +#include + +/* Set of debugging defines */ + +#undef SERIAL_DEBUG_INTR +#undef SERIAL_DEBUG_OPEN +#undef SERIAL_DEBUG_FLOW +#undef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT + +/* Sanity checks */ + +#if defined(MODULE) && defined(SERIAL_DEBUG_MCOUNT) +#define DBG_CNT(s) printk("(%s): [%x] refc=%d, serc=%d, ttyc=%d -> %s\n", \ + tty->name, (info->tport.flags), serial_driver->refcount,info->count,tty->count,s) +#else +#define DBG_CNT(s) +#endif + +/* + * End of serial driver configuration section. + */ + +#include + +#include +#include +#include +static char *serial_version = "4.30"; + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + + +#include + +#include +#include + +struct serial_state { + struct tty_port tport; + struct circ_buf xmit; + struct async_icount icount; + + unsigned long port; + int baud_base; + int xmit_fifo_size; + int custom_divisor; + int read_status_mask; + int ignore_status_mask; + int timeout; + int quot; + int IER; /* Interrupt Enable Register */ + int MCR; /* Modem control register */ + int x_char; /* xon/xoff character */ +}; + +#define custom amiga_custom +static char *serial_name = "Amiga-builtin serial driver"; + +static struct tty_driver *serial_driver; + +/* number of characters left in xmit buffer before we ask for more */ +#define WAKEUP_CHARS 256 + +static unsigned char current_ctl_bits; + +static void change_speed(struct tty_struct *tty, struct serial_state *info, + struct ktermios *old); +static void rs_wait_until_sent(struct tty_struct *tty, int timeout); + + +static struct serial_state rs_table[1]; + +#define NR_PORTS ARRAY_SIZE(rs_table) + +#include + +#define serial_isroot() (capable(CAP_SYS_ADMIN)) + +/* some serial hardware definitions */ +#define SDR_OVRUN (1<<15) +#define SDR_RBF (1<<14) +#define SDR_TBE (1<<13) +#define SDR_TSRE (1<<12) + +#define SERPER_PARENB (1<<15) + +#define AC_SETCLR (1<<15) +#define AC_UARTBRK (1<<11) + +#define SER_DTR (1<<7) +#define SER_RTS (1<<6) +#define SER_DCD (1<<5) +#define SER_CTS (1<<4) +#define SER_DSR (1<<3) + +static __inline__ void rtsdtr_ctrl(int bits) +{ + ciab.pra = ((bits & (SER_RTS | SER_DTR)) ^ (SER_RTS | SER_DTR)) | (ciab.pra & ~(SER_RTS | SER_DTR)); +} + +/* + * ------------------------------------------------------------ + * rs_stop() and rs_start() + * + * This routines are called before setting or resetting tty->stopped. + * They enable or disable transmitter interrupts, as necessary. + * ------------------------------------------------------------ + */ +static void rs_stop(struct tty_struct *tty) +{ + struct serial_state *info = tty->driver_data; + unsigned long flags; + + local_irq_save(flags); + if (info->IER & UART_IER_THRI) { + info->IER &= ~UART_IER_THRI; + /* disable Tx interrupt and remove any pending interrupts */ + custom.intena = IF_TBE; + mb(); + custom.intreq = IF_TBE; + mb(); + } + local_irq_restore(flags); +} + +static void rs_start(struct tty_struct *tty) +{ + struct serial_state *info = tty->driver_data; + unsigned long flags; + + local_irq_save(flags); + if (info->xmit.head != info->xmit.tail + && info->xmit.buf + && !(info->IER & UART_IER_THRI)) { + info->IER |= UART_IER_THRI; + custom.intena = IF_SETCLR | IF_TBE; + mb(); + /* set a pending Tx Interrupt, transmitter should restart now */ + custom.intreq = IF_SETCLR | IF_TBE; + mb(); + } + local_irq_restore(flags); +} + +/* + * ---------------------------------------------------------------------- + * + * Here starts the interrupt handling routines. All of the following + * subroutines are declared as inline and are folded into + * rs_interrupt(). They were separated out for readability's sake. + * + * Note: rs_interrupt() is a "fast" interrupt, which means that it + * runs with interrupts turned off. People who may want to modify + * rs_interrupt() should try to keep the interrupt handler as fast as + * possible. After you are done making modifications, it is not a bad + * idea to do: + * + * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c + * + * and look at the resulting assemble code in serial.s. + * + * - Ted Ts'o (tytso@mit.edu), 7-Mar-93 + * ----------------------------------------------------------------------- + */ + +static void receive_chars(struct serial_state *info) +{ + int status; + int serdatr; + unsigned char ch, flag; + struct async_icount *icount; + int oe = 0; + + icount = &info->icount; + + status = UART_LSR_DR; /* We obviously have a character! */ + serdatr = custom.serdatr; + mb(); + custom.intreq = IF_RBF; + mb(); + + if((serdatr & 0x1ff) == 0) + status |= UART_LSR_BI; + if(serdatr & SDR_OVRUN) + status |= UART_LSR_OE; + + ch = serdatr & 0xff; + icount->rx++; + +#ifdef SERIAL_DEBUG_INTR + printk("DR%02x:%02x...", ch, status); +#endif + flag = TTY_NORMAL; + + /* + * We don't handle parity or frame errors - but I have left + * the code in, since I'm not sure that the errors can't be + * detected. + */ + + if (status & (UART_LSR_BI | UART_LSR_PE | + UART_LSR_FE | UART_LSR_OE)) { + /* + * For statistics only + */ + if (status & UART_LSR_BI) { + status &= ~(UART_LSR_FE | UART_LSR_PE); + icount->brk++; + } else if (status & UART_LSR_PE) + icount->parity++; + else if (status & UART_LSR_FE) + icount->frame++; + if (status & UART_LSR_OE) + icount->overrun++; + + /* + * Now check to see if character should be + * ignored, and mask off conditions which + * should be ignored. + */ + if (status & info->ignore_status_mask) + goto out; + + status &= info->read_status_mask; + + if (status & (UART_LSR_BI)) { +#ifdef SERIAL_DEBUG_INTR + printk("handling break...."); +#endif + flag = TTY_BREAK; + if (info->tport.flags & ASYNC_SAK) + do_SAK(info->tport.tty); + } else if (status & UART_LSR_PE) + flag = TTY_PARITY; + else if (status & UART_LSR_FE) + flag = TTY_FRAME; + if (status & UART_LSR_OE) { + /* + * Overrun is special, since it's + * reported immediately, and doesn't + * affect the current character + */ + oe = 1; + } + } + tty_insert_flip_char(&info->tport, ch, flag); + if (oe == 1) + tty_insert_flip_char(&info->tport, 0, TTY_OVERRUN); + tty_flip_buffer_push(&info->tport); +out: + return; +} + +static void transmit_chars(struct serial_state *info) +{ + custom.intreq = IF_TBE; + mb(); + if (info->x_char) { + custom.serdat = info->x_char | 0x100; + mb(); + info->icount.tx++; + info->x_char = 0; + return; + } + if (info->xmit.head == info->xmit.tail + || info->tport.tty->stopped + || info->tport.tty->hw_stopped) { + info->IER &= ~UART_IER_THRI; + custom.intena = IF_TBE; + mb(); + return; + } + + custom.serdat = info->xmit.buf[info->xmit.tail++] | 0x100; + mb(); + info->xmit.tail = info->xmit.tail & (SERIAL_XMIT_SIZE-1); + info->icount.tx++; + + if (CIRC_CNT(info->xmit.head, + info->xmit.tail, + SERIAL_XMIT_SIZE) < WAKEUP_CHARS) + tty_wakeup(info->tport.tty); + +#ifdef SERIAL_DEBUG_INTR + printk("THRE..."); +#endif + if (info->xmit.head == info->xmit.tail) { + custom.intena = IF_TBE; + mb(); + info->IER &= ~UART_IER_THRI; + } +} + +static void check_modem_status(struct serial_state *info) +{ + struct tty_port *port = &info->tport; + unsigned char status = ciab.pra & (SER_DCD | SER_CTS | SER_DSR); + unsigned char dstatus; + struct async_icount *icount; + + /* Determine bits that have changed */ + dstatus = status ^ current_ctl_bits; + current_ctl_bits = status; + + if (dstatus) { + icount = &info->icount; + /* update input line counters */ + if (dstatus & SER_DSR) + icount->dsr++; + if (dstatus & SER_DCD) { + icount->dcd++; + } + if (dstatus & SER_CTS) + icount->cts++; + wake_up_interruptible(&port->delta_msr_wait); + } + + if (tty_port_check_carrier(port) && (dstatus & SER_DCD)) { +#if (defined(SERIAL_DEBUG_OPEN) || defined(SERIAL_DEBUG_INTR)) + printk("ttyS%d CD now %s...", info->line, + (!(status & SER_DCD)) ? "on" : "off"); +#endif + if (!(status & SER_DCD)) + wake_up_interruptible(&port->open_wait); + else { +#ifdef SERIAL_DEBUG_OPEN + printk("doing serial hangup..."); +#endif + if (port->tty) + tty_hangup(port->tty); + } + } + if (tty_port_cts_enabled(port)) { + if (port->tty->hw_stopped) { + if (!(status & SER_CTS)) { +#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW)) + printk("CTS tx start..."); +#endif + port->tty->hw_stopped = 0; + info->IER |= UART_IER_THRI; + custom.intena = IF_SETCLR | IF_TBE; + mb(); + /* set a pending Tx Interrupt, transmitter should restart now */ + custom.intreq = IF_SETCLR | IF_TBE; + mb(); + tty_wakeup(port->tty); + return; + } + } else { + if ((status & SER_CTS)) { +#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW)) + printk("CTS tx stop..."); +#endif + port->tty->hw_stopped = 1; + info->IER &= ~UART_IER_THRI; + /* disable Tx interrupt and remove any pending interrupts */ + custom.intena = IF_TBE; + mb(); + custom.intreq = IF_TBE; + mb(); + } + } + } +} + +static irqreturn_t ser_vbl_int( int irq, void *data) +{ + /* vbl is just a periodic interrupt we tie into to update modem status */ + struct serial_state *info = data; + /* + * TBD - is it better to unregister from this interrupt or to + * ignore it if MSI is clear ? + */ + if(info->IER & UART_IER_MSI) + check_modem_status(info); + return IRQ_HANDLED; +} + +static irqreturn_t ser_rx_int(int irq, void *dev_id) +{ + struct serial_state *info = dev_id; + +#ifdef SERIAL_DEBUG_INTR + printk("ser_rx_int..."); +#endif + + if (!info->tport.tty) + return IRQ_NONE; + + receive_chars(info); +#ifdef SERIAL_DEBUG_INTR + printk("end.\n"); +#endif + return IRQ_HANDLED; +} + +static irqreturn_t ser_tx_int(int irq, void *dev_id) +{ + struct serial_state *info = dev_id; + + if (custom.serdatr & SDR_TBE) { +#ifdef SERIAL_DEBUG_INTR + printk("ser_tx_int..."); +#endif + + if (!info->tport.tty) + return IRQ_NONE; + + transmit_chars(info); +#ifdef SERIAL_DEBUG_INTR + printk("end.\n"); +#endif + } + return IRQ_HANDLED; +} + +/* + * ------------------------------------------------------------------- + * Here ends the serial interrupt routines. + * ------------------------------------------------------------------- + */ + +/* + * --------------------------------------------------------------- + * Low level utility subroutines for the serial driver: routines to + * figure out the appropriate timeout for an interrupt chain, routines + * to initialize and startup a serial port, and routines to shutdown a + * serial port. Useful stuff like that. + * --------------------------------------------------------------- + */ + +static int startup(struct tty_struct *tty, struct serial_state *info) +{ + struct tty_port *port = &info->tport; + unsigned long flags; + int retval=0; + unsigned long page; + + page = get_zeroed_page(GFP_KERNEL); + if (!page) + return -ENOMEM; + + local_irq_save(flags); + + if (tty_port_initialized(port)) { + free_page(page); + goto errout; + } + + if (info->xmit.buf) + free_page(page); + else + info->xmit.buf = (unsigned char *) page; + +#ifdef SERIAL_DEBUG_OPEN + printk("starting up ttys%d ...", info->line); +#endif + + /* Clear anything in the input buffer */ + + custom.intreq = IF_RBF; + mb(); + + retval = request_irq(IRQ_AMIGA_VERTB, ser_vbl_int, 0, "serial status", info); + if (retval) { + if (serial_isroot()) { + set_bit(TTY_IO_ERROR, &tty->flags); + retval = 0; + } + goto errout; + } + + /* enable both Rx and Tx interrupts */ + custom.intena = IF_SETCLR | IF_RBF | IF_TBE; + mb(); + info->IER = UART_IER_MSI; + + /* remember current state of the DCD and CTS bits */ + current_ctl_bits = ciab.pra & (SER_DCD | SER_CTS | SER_DSR); + + info->MCR = 0; + if (C_BAUD(tty)) + info->MCR = SER_DTR | SER_RTS; + rtsdtr_ctrl(info->MCR); + + clear_bit(TTY_IO_ERROR, &tty->flags); + info->xmit.head = info->xmit.tail = 0; + + /* + * and set the speed of the serial port + */ + change_speed(tty, info, NULL); + + tty_port_set_initialized(port, 1); + local_irq_restore(flags); + return 0; + +errout: + local_irq_restore(flags); + return retval; +} + +/* + * This routine will shutdown a serial port; interrupts are disabled, and + * DTR is dropped if the hangup on close termio flag is on. + */ +static void shutdown(struct tty_struct *tty, struct serial_state *info) +{ + unsigned long flags; + struct serial_state *state; + + if (!tty_port_initialized(&info->tport)) + return; + + state = info; + +#ifdef SERIAL_DEBUG_OPEN + printk("Shutting down serial port %d ....\n", info->line); +#endif + + local_irq_save(flags); /* Disable interrupts */ + + /* + * clear delta_msr_wait queue to avoid mem leaks: we may free the irq + * here so the queue might never be waken up + */ + wake_up_interruptible(&info->tport.delta_msr_wait); + + /* + * Free the IRQ, if necessary + */ + free_irq(IRQ_AMIGA_VERTB, info); + + if (info->xmit.buf) { + free_page((unsigned long) info->xmit.buf); + info->xmit.buf = NULL; + } + + info->IER = 0; + custom.intena = IF_RBF | IF_TBE; + mb(); + + /* disable break condition */ + custom.adkcon = AC_UARTBRK; + mb(); + + if (C_HUPCL(tty)) + info->MCR &= ~(SER_DTR|SER_RTS); + rtsdtr_ctrl(info->MCR); + + set_bit(TTY_IO_ERROR, &tty->flags); + + tty_port_set_initialized(&info->tport, 0); + local_irq_restore(flags); +} + + +/* + * This routine is called to set the UART divisor registers to match + * the specified baud rate for a serial port. + */ +static void change_speed(struct tty_struct *tty, struct serial_state *info, + struct ktermios *old_termios) +{ + struct tty_port *port = &info->tport; + int quot = 0, baud_base, baud; + unsigned cflag, cval = 0; + int bits; + unsigned long flags; + + cflag = tty->termios.c_cflag; + + /* Byte size is always 8 bits plus parity bit if requested */ + + cval = 3; bits = 10; + if (cflag & CSTOPB) { + cval |= 0x04; + bits++; + } + if (cflag & PARENB) { + cval |= UART_LCR_PARITY; + bits++; + } + if (!(cflag & PARODD)) + cval |= UART_LCR_EPAR; +#ifdef CMSPAR + if (cflag & CMSPAR) + cval |= UART_LCR_SPAR; +#endif + + /* Determine divisor based on baud rate */ + baud = tty_get_baud_rate(tty); + if (!baud) + baud = 9600; /* B0 transition handled in rs_set_termios */ + baud_base = info->baud_base; + if (baud == 38400 && (port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) + quot = info->custom_divisor; + else { + if (baud == 134) + /* Special case since 134 is really 134.5 */ + quot = (2*baud_base / 269); + else if (baud) + quot = baud_base / baud; + } + /* If the quotient is zero refuse the change */ + if (!quot && old_termios) { + /* FIXME: Will need updating for new tty in the end */ + tty->termios.c_cflag &= ~CBAUD; + tty->termios.c_cflag |= (old_termios->c_cflag & CBAUD); + baud = tty_get_baud_rate(tty); + if (!baud) + baud = 9600; + if (baud == 38400 && + (port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) + quot = info->custom_divisor; + else { + if (baud == 134) + /* Special case since 134 is really 134.5 */ + quot = (2*baud_base / 269); + else if (baud) + quot = baud_base / baud; + } + } + /* As a last resort, if the quotient is zero, default to 9600 bps */ + if (!quot) + quot = baud_base / 9600; + info->quot = quot; + info->timeout = ((info->xmit_fifo_size*HZ*bits*quot) / baud_base); + info->timeout += HZ/50; /* Add .02 seconds of slop */ + + /* CTS flow control flag and modem status interrupts */ + info->IER &= ~UART_IER_MSI; + if (port->flags & ASYNC_HARDPPS_CD) + info->IER |= UART_IER_MSI; + tty_port_set_cts_flow(port, cflag & CRTSCTS); + if (cflag & CRTSCTS) + info->IER |= UART_IER_MSI; + tty_port_set_check_carrier(port, ~cflag & CLOCAL); + if (~cflag & CLOCAL) + info->IER |= UART_IER_MSI; + /* TBD: + * Does clearing IER_MSI imply that we should disable the VBL interrupt ? + */ + + /* + * Set up parity check flag + */ + + info->read_status_mask = UART_LSR_OE | UART_LSR_DR; + if (I_INPCK(tty)) + info->read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (I_BRKINT(tty) || I_PARMRK(tty)) + info->read_status_mask |= UART_LSR_BI; + + /* + * Characters to ignore + */ + info->ignore_status_mask = 0; + if (I_IGNPAR(tty)) + info->ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; + if (I_IGNBRK(tty)) { + info->ignore_status_mask |= UART_LSR_BI; + /* + * If we're ignore parity and break indicators, ignore + * overruns too. (For real raw support). + */ + if (I_IGNPAR(tty)) + info->ignore_status_mask |= UART_LSR_OE; + } + /* + * !!! ignore all characters if CREAD is not set + */ + if ((cflag & CREAD) == 0) + info->ignore_status_mask |= UART_LSR_DR; + local_irq_save(flags); + + { + short serper; + + /* Set up the baud rate */ + serper = quot - 1; + + /* Enable or disable parity bit */ + + if(cval & UART_LCR_PARITY) + serper |= (SERPER_PARENB); + + custom.serper = serper; + mb(); + } + + local_irq_restore(flags); +} + +static int rs_put_char(struct tty_struct *tty, unsigned char ch) +{ + struct serial_state *info; + unsigned long flags; + + info = tty->driver_data; + + if (!info->xmit.buf) + return 0; + + local_irq_save(flags); + if (CIRC_SPACE(info->xmit.head, + info->xmit.tail, + SERIAL_XMIT_SIZE) == 0) { + local_irq_restore(flags); + return 0; + } + + info->xmit.buf[info->xmit.head++] = ch; + info->xmit.head &= SERIAL_XMIT_SIZE-1; + local_irq_restore(flags); + return 1; +} + +static void rs_flush_chars(struct tty_struct *tty) +{ + struct serial_state *info = tty->driver_data; + unsigned long flags; + + if (info->xmit.head == info->xmit.tail + || tty->stopped + || tty->hw_stopped + || !info->xmit.buf) + return; + + local_irq_save(flags); + info->IER |= UART_IER_THRI; + custom.intena = IF_SETCLR | IF_TBE; + mb(); + /* set a pending Tx Interrupt, transmitter should restart now */ + custom.intreq = IF_SETCLR | IF_TBE; + mb(); + local_irq_restore(flags); +} + +static int rs_write(struct tty_struct * tty, const unsigned char *buf, int count) +{ + int c, ret = 0; + struct serial_state *info = tty->driver_data; + unsigned long flags; + + if (!info->xmit.buf) + return 0; + + local_irq_save(flags); + while (1) { + c = CIRC_SPACE_TO_END(info->xmit.head, + info->xmit.tail, + SERIAL_XMIT_SIZE); + if (count < c) + c = count; + if (c <= 0) { + break; + } + memcpy(info->xmit.buf + info->xmit.head, buf, c); + info->xmit.head = ((info->xmit.head + c) & + (SERIAL_XMIT_SIZE-1)); + buf += c; + count -= c; + ret += c; + } + local_irq_restore(flags); + + if (info->xmit.head != info->xmit.tail + && !tty->stopped + && !tty->hw_stopped + && !(info->IER & UART_IER_THRI)) { + info->IER |= UART_IER_THRI; + local_irq_disable(); + custom.intena = IF_SETCLR | IF_TBE; + mb(); + /* set a pending Tx Interrupt, transmitter should restart now */ + custom.intreq = IF_SETCLR | IF_TBE; + mb(); + local_irq_restore(flags); + } + return ret; +} + +static int rs_write_room(struct tty_struct *tty) +{ + struct serial_state *info = tty->driver_data; + + return CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); +} + +static int rs_chars_in_buffer(struct tty_struct *tty) +{ + struct serial_state *info = tty->driver_data; + + return CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); +} + +static void rs_flush_buffer(struct tty_struct *tty) +{ + struct serial_state *info = tty->driver_data; + unsigned long flags; + + local_irq_save(flags); + info->xmit.head = info->xmit.tail = 0; + local_irq_restore(flags); + tty_wakeup(tty); +} + +/* + * This function is used to send a high-priority XON/XOFF character to + * the device + */ +static void rs_send_xchar(struct tty_struct *tty, char ch) +{ + struct serial_state *info = tty->driver_data; + unsigned long flags; + + info->x_char = ch; + if (ch) { + /* Make sure transmit interrupts are on */ + + /* Check this ! */ + local_irq_save(flags); + if(!(custom.intenar & IF_TBE)) { + custom.intena = IF_SETCLR | IF_TBE; + mb(); + /* set a pending Tx Interrupt, transmitter should restart now */ + custom.intreq = IF_SETCLR | IF_TBE; + mb(); + } + local_irq_restore(flags); + + info->IER |= UART_IER_THRI; + } +} + +/* + * ------------------------------------------------------------ + * rs_throttle() + * + * This routine is called by the upper-layer tty layer to signal that + * incoming characters should be throttled. + * ------------------------------------------------------------ + */ +static void rs_throttle(struct tty_struct * tty) +{ + struct serial_state *info = tty->driver_data; + unsigned long flags; +#ifdef SERIAL_DEBUG_THROTTLE + printk("throttle %s ....\n", tty_name(tty)); +#endif + + if (I_IXOFF(tty)) + rs_send_xchar(tty, STOP_CHAR(tty)); + + if (C_CRTSCTS(tty)) + info->MCR &= ~SER_RTS; + + local_irq_save(flags); + rtsdtr_ctrl(info->MCR); + local_irq_restore(flags); +} + +static void rs_unthrottle(struct tty_struct * tty) +{ + struct serial_state *info = tty->driver_data; + unsigned long flags; +#ifdef SERIAL_DEBUG_THROTTLE + printk("unthrottle %s ....\n", tty_name(tty)); +#endif + + if (I_IXOFF(tty)) { + if (info->x_char) + info->x_char = 0; + else + rs_send_xchar(tty, START_CHAR(tty)); + } + if (C_CRTSCTS(tty)) + info->MCR |= SER_RTS; + local_irq_save(flags); + rtsdtr_ctrl(info->MCR); + local_irq_restore(flags); +} + +/* + * ------------------------------------------------------------ + * rs_ioctl() and friends + * ------------------------------------------------------------ + */ + +static int get_serial_info(struct tty_struct *tty, struct serial_struct *ss) +{ + struct serial_state *state = tty->driver_data; + + tty_lock(tty); + ss->line = tty->index; + ss->port = state->port; + ss->flags = state->tport.flags; + ss->xmit_fifo_size = state->xmit_fifo_size; + ss->baud_base = state->baud_base; + ss->close_delay = state->tport.close_delay; + ss->closing_wait = state->tport.closing_wait; + ss->custom_divisor = state->custom_divisor; + tty_unlock(tty); + return 0; +} + +static int set_serial_info(struct tty_struct *tty, struct serial_struct *ss) +{ + struct serial_state *state = tty->driver_data; + struct tty_port *port = &state->tport; + bool change_spd; + int retval = 0; + + tty_lock(tty); + change_spd = ((ss->flags ^ port->flags) & ASYNC_SPD_MASK) || + ss->custom_divisor != state->custom_divisor; + if (ss->irq || ss->port != state->port || + ss->xmit_fifo_size != state->xmit_fifo_size) { + tty_unlock(tty); + return -EINVAL; + } + + if (!serial_isroot()) { + if ((ss->baud_base != state->baud_base) || + (ss->close_delay != port->close_delay) || + (ss->closing_wait != port->closing_wait) || + (ss->xmit_fifo_size != state->xmit_fifo_size) || + ((ss->flags & ~ASYNC_USR_MASK) != + (port->flags & ~ASYNC_USR_MASK))) { + tty_unlock(tty); + return -EPERM; + } + port->flags = ((port->flags & ~ASYNC_USR_MASK) | + (ss->flags & ASYNC_USR_MASK)); + state->custom_divisor = ss->custom_divisor; + goto check_and_exit; + } + + if (ss->baud_base < 9600) { + tty_unlock(tty); + return -EINVAL; + } + + /* + * OK, past this point, all the error checking has been done. + * At this point, we start making changes..... + */ + + state->baud_base = ss->baud_base; + port->flags = ((port->flags & ~ASYNC_FLAGS) | + (ss->flags & ASYNC_FLAGS)); + state->custom_divisor = ss->custom_divisor; + port->close_delay = ss->close_delay * HZ/100; + port->closing_wait = ss->closing_wait * HZ/100; + port->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + +check_and_exit: + if (tty_port_initialized(port)) { + if (change_spd) { + /* warn about deprecation unless clearing */ + if (ss->flags & ASYNC_SPD_MASK) + dev_warn_ratelimited(tty->dev, "use of SPD flags is deprecated\n"); + change_speed(tty, state, NULL); + } + } else + retval = startup(tty, state); + tty_unlock(tty); + return retval; +} + +/* + * get_lsr_info - get line status register info + * + * Purpose: Let user call ioctl() to get info when the UART physically + * is emptied. On bus types like RS485, the transmitter must + * release the bus after transmitting. This must be done when + * the transmit shift register is empty, not be done when the + * transmit holding register is empty. This functionality + * allows an RS485 driver to be written in user space. + */ +static int get_lsr_info(struct serial_state *info, unsigned int __user *value) +{ + unsigned char status; + unsigned int result; + unsigned long flags; + + local_irq_save(flags); + status = custom.serdatr; + mb(); + local_irq_restore(flags); + result = ((status & SDR_TSRE) ? TIOCSER_TEMT : 0); + if (copy_to_user(value, &result, sizeof(int))) + return -EFAULT; + return 0; +} + + +static int rs_tiocmget(struct tty_struct *tty) +{ + struct serial_state *info = tty->driver_data; + unsigned char control, status; + unsigned long flags; + + if (tty_io_error(tty)) + return -EIO; + + control = info->MCR; + local_irq_save(flags); + status = ciab.pra; + local_irq_restore(flags); + return ((control & SER_RTS) ? TIOCM_RTS : 0) + | ((control & SER_DTR) ? TIOCM_DTR : 0) + | (!(status & SER_DCD) ? TIOCM_CAR : 0) + | (!(status & SER_DSR) ? TIOCM_DSR : 0) + | (!(status & SER_CTS) ? TIOCM_CTS : 0); +} + +static int rs_tiocmset(struct tty_struct *tty, unsigned int set, + unsigned int clear) +{ + struct serial_state *info = tty->driver_data; + unsigned long flags; + + if (tty_io_error(tty)) + return -EIO; + + local_irq_save(flags); + if (set & TIOCM_RTS) + info->MCR |= SER_RTS; + if (set & TIOCM_DTR) + info->MCR |= SER_DTR; + if (clear & TIOCM_RTS) + info->MCR &= ~SER_RTS; + if (clear & TIOCM_DTR) + info->MCR &= ~SER_DTR; + rtsdtr_ctrl(info->MCR); + local_irq_restore(flags); + return 0; +} + +/* + * rs_break() --- routine which turns the break handling on or off + */ +static int rs_break(struct tty_struct *tty, int break_state) +{ + unsigned long flags; + + local_irq_save(flags); + if (break_state == -1) + custom.adkcon = AC_SETCLR | AC_UARTBRK; + else + custom.adkcon = AC_UARTBRK; + mb(); + local_irq_restore(flags); + return 0; +} + +/* + * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) + * Return: write counters to the user passed counter struct + * NB: both 1->0 and 0->1 transitions are counted except for + * RI where only 0->1 is counted. + */ +static int rs_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount) +{ + struct serial_state *info = tty->driver_data; + struct async_icount cnow; + unsigned long flags; + + local_irq_save(flags); + cnow = info->icount; + local_irq_restore(flags); + icount->cts = cnow.cts; + icount->dsr = cnow.dsr; + icount->rng = cnow.rng; + icount->dcd = cnow.dcd; + icount->rx = cnow.rx; + icount->tx = cnow.tx; + icount->frame = cnow.frame; + icount->overrun = cnow.overrun; + icount->parity = cnow.parity; + icount->brk = cnow.brk; + icount->buf_overrun = cnow.buf_overrun; + + return 0; +} + +static int rs_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct serial_state *info = tty->driver_data; + struct async_icount cprev, cnow; /* kernel counter temps */ + void __user *argp = (void __user *)arg; + unsigned long flags; + DEFINE_WAIT(wait); + int ret; + + if ((cmd != TIOCSERCONFIG) && + (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) { + if (tty_io_error(tty)) + return -EIO; + } + + switch (cmd) { + case TIOCSERCONFIG: + return 0; + + case TIOCSERGETLSR: /* Get line status register */ + return get_lsr_info(info, argp); + + /* + * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change + * - mask passed in arg for lines of interest + * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) + * Caller should use TIOCGICOUNT to see which one it was + */ + case TIOCMIWAIT: + local_irq_save(flags); + /* note the counters on entry */ + cprev = info->icount; + local_irq_restore(flags); + while (1) { + prepare_to_wait(&info->tport.delta_msr_wait, + &wait, TASK_INTERRUPTIBLE); + local_irq_save(flags); + cnow = info->icount; /* atomic copy */ + local_irq_restore(flags); + if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && + cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) { + ret = -EIO; /* no change => error */ + break; + } + if ( ((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || + ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || + ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || + ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) { + ret = 0; + break; + } + schedule(); + /* see if a signal did it */ + if (signal_pending(current)) { + ret = -ERESTARTSYS; + break; + } + cprev = cnow; + } + finish_wait(&info->tport.delta_msr_wait, &wait); + return ret; + + default: + return -ENOIOCTLCMD; + } + return 0; +} + +static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) +{ + struct serial_state *info = tty->driver_data; + unsigned long flags; + unsigned int cflag = tty->termios.c_cflag; + + change_speed(tty, info, old_termios); + + /* Handle transition to B0 status */ + if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD)) { + info->MCR &= ~(SER_DTR|SER_RTS); + local_irq_save(flags); + rtsdtr_ctrl(info->MCR); + local_irq_restore(flags); + } + + /* Handle transition away from B0 status */ + if (!(old_termios->c_cflag & CBAUD) && (cflag & CBAUD)) { + info->MCR |= SER_DTR; + if (!C_CRTSCTS(tty) || !tty_throttled(tty)) + info->MCR |= SER_RTS; + local_irq_save(flags); + rtsdtr_ctrl(info->MCR); + local_irq_restore(flags); + } + + /* Handle turning off CRTSCTS */ + if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty)) { + tty->hw_stopped = 0; + rs_start(tty); + } + +#if 0 + /* + * No need to wake up processes in open wait, since they + * sample the CLOCAL flag once, and don't recheck it. + * XXX It's not clear whether the current behavior is correct + * or not. Hence, this may change..... + */ + if (!(old_termios->c_cflag & CLOCAL) && C_CLOCAL(tty)) + wake_up_interruptible(&info->open_wait); +#endif +} + +/* + * ------------------------------------------------------------ + * rs_close() + * + * This routine is called when the serial port gets closed. First, we + * wait for the last remaining data to be sent. Then, we unlink its + * async structure from the interrupt chain if necessary, and we free + * that IRQ if nothing is left in the chain. + * ------------------------------------------------------------ + */ +static void rs_close(struct tty_struct *tty, struct file * filp) +{ + struct serial_state *state = tty->driver_data; + struct tty_port *port = &state->tport; + + if (tty_port_close_start(port, tty, filp) == 0) + return; + + /* + * At this point we stop accepting input. To do this, we + * disable the receive line status interrupts, and tell the + * interrupt driver to stop checking the data ready bit in the + * line status register. + */ + state->read_status_mask &= ~UART_LSR_DR; + if (tty_port_initialized(port)) { + /* disable receive interrupts */ + custom.intena = IF_RBF; + mb(); + /* clear any pending receive interrupt */ + custom.intreq = IF_RBF; + mb(); + + /* + * Before we drop DTR, make sure the UART transmitter + * has completely drained; this is especially + * important if there is a transmit FIFO! + */ + rs_wait_until_sent(tty, state->timeout); + } + shutdown(tty, state); + rs_flush_buffer(tty); + + tty_ldisc_flush(tty); + port->tty = NULL; + + tty_port_close_end(port, tty); +} + +/* + * rs_wait_until_sent() --- wait until the transmitter is empty + */ +static void rs_wait_until_sent(struct tty_struct *tty, int timeout) +{ + struct serial_state *info = tty->driver_data; + unsigned long orig_jiffies, char_time; + int lsr; + + if (info->xmit_fifo_size == 0) + return; /* Just in case.... */ + + orig_jiffies = jiffies; + + /* + * Set the check interval to be 1/5 of the estimated time to + * send a single character, and make it at least 1. The check + * interval should also be less than the timeout. + * + * Note: we have to use pretty tight timings here to satisfy + * the NIST-PCTS. + */ + char_time = (info->timeout - HZ/50) / info->xmit_fifo_size; + char_time = char_time / 5; + if (char_time == 0) + char_time = 1; + if (timeout) + char_time = min_t(unsigned long, char_time, timeout); + /* + * If the transmitter hasn't cleared in twice the approximate + * amount of time to send the entire FIFO, it probably won't + * ever clear. This assumes the UART isn't doing flow + * control, which is currently the case. Hence, if it ever + * takes longer than info->timeout, this is probably due to a + * UART bug of some kind. So, we clamp the timeout parameter at + * 2*info->timeout. + */ + if (!timeout || timeout > 2*info->timeout) + timeout = 2*info->timeout; +#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT + printk("In rs_wait_until_sent(%d) check=%lu...", timeout, char_time); + printk("jiff=%lu...", jiffies); +#endif + while(!((lsr = custom.serdatr) & SDR_TSRE)) { +#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT + printk("serdatr = %d (jiff=%lu)...", lsr, jiffies); +#endif + msleep_interruptible(jiffies_to_msecs(char_time)); + if (signal_pending(current)) + break; + if (timeout && time_after(jiffies, orig_jiffies + timeout)) + break; + } + __set_current_state(TASK_RUNNING); + +#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT + printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies); +#endif +} + +/* + * rs_hangup() --- called by tty_hangup() when a hangup is signaled. + */ +static void rs_hangup(struct tty_struct *tty) +{ + struct serial_state *info = tty->driver_data; + + rs_flush_buffer(tty); + shutdown(tty, info); + info->tport.count = 0; + tty_port_set_active(&info->tport, 0); + info->tport.tty = NULL; + wake_up_interruptible(&info->tport.open_wait); +} + +/* + * This routine is called whenever a serial port is opened. It + * enables interrupts for a serial port, linking in its async structure into + * the IRQ chain. It also performs the serial-specific + * initialization for the tty structure. + */ +static int rs_open(struct tty_struct *tty, struct file * filp) +{ + struct serial_state *info = rs_table + tty->index; + struct tty_port *port = &info->tport; + int retval; + + port->count++; + port->tty = tty; + tty->driver_data = info; + tty->port = port; + + port->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + + retval = startup(tty, info); + if (retval) { + return retval; + } + + return tty_port_block_til_ready(port, tty, filp); +} + +/* + * /proc fs routines.... + */ + +static inline void line_info(struct seq_file *m, int line, + struct serial_state *state) +{ + char stat_buf[30], control, status; + unsigned long flags; + + seq_printf(m, "%d: uart:amiga_builtin", line); + + local_irq_save(flags); + status = ciab.pra; + control = tty_port_initialized(&state->tport) ? state->MCR : status; + local_irq_restore(flags); + + stat_buf[0] = 0; + stat_buf[1] = 0; + if(!(control & SER_RTS)) + strcat(stat_buf, "|RTS"); + if(!(status & SER_CTS)) + strcat(stat_buf, "|CTS"); + if(!(control & SER_DTR)) + strcat(stat_buf, "|DTR"); + if(!(status & SER_DSR)) + strcat(stat_buf, "|DSR"); + if(!(status & SER_DCD)) + strcat(stat_buf, "|CD"); + + if (state->quot) + seq_printf(m, " baud:%d", state->baud_base / state->quot); + + seq_printf(m, " tx:%d rx:%d", state->icount.tx, state->icount.rx); + + if (state->icount.frame) + seq_printf(m, " fe:%d", state->icount.frame); + + if (state->icount.parity) + seq_printf(m, " pe:%d", state->icount.parity); + + if (state->icount.brk) + seq_printf(m, " brk:%d", state->icount.brk); + + if (state->icount.overrun) + seq_printf(m, " oe:%d", state->icount.overrun); + + /* + * Last thing is the RS-232 status lines + */ + seq_printf(m, " %s\n", stat_buf+1); +} + +static int rs_proc_show(struct seq_file *m, void *v) +{ + seq_printf(m, "serinfo:1.0 driver:%s\n", serial_version); + line_info(m, 0, &rs_table[0]); + return 0; +} + +/* + * --------------------------------------------------------------------- + * rs_init() and friends + * + * rs_init() is called at boot-time to initialize the serial driver. + * --------------------------------------------------------------------- + */ + +/* + * This routine prints out the appropriate serial driver version + * number, and identifies which options were configured into this + * driver. + */ +static void show_serial_version(void) +{ + printk(KERN_INFO "%s version %s\n", serial_name, serial_version); +} + + +static const struct tty_operations serial_ops = { + .open = rs_open, + .close = rs_close, + .write = rs_write, + .put_char = rs_put_char, + .flush_chars = rs_flush_chars, + .write_room = rs_write_room, + .chars_in_buffer = rs_chars_in_buffer, + .flush_buffer = rs_flush_buffer, + .ioctl = rs_ioctl, + .throttle = rs_throttle, + .unthrottle = rs_unthrottle, + .set_termios = rs_set_termios, + .stop = rs_stop, + .start = rs_start, + .hangup = rs_hangup, + .break_ctl = rs_break, + .send_xchar = rs_send_xchar, + .wait_until_sent = rs_wait_until_sent, + .tiocmget = rs_tiocmget, + .tiocmset = rs_tiocmset, + .get_icount = rs_get_icount, + .set_serial = set_serial_info, + .get_serial = get_serial_info, + .proc_show = rs_proc_show, +}; + +static int amiga_carrier_raised(struct tty_port *port) +{ + return !(ciab.pra & SER_DCD); +} + +static void amiga_dtr_rts(struct tty_port *port, int raise) +{ + struct serial_state *info = container_of(port, struct serial_state, + tport); + unsigned long flags; + + if (raise) + info->MCR |= SER_DTR|SER_RTS; + else + info->MCR &= ~(SER_DTR|SER_RTS); + + local_irq_save(flags); + rtsdtr_ctrl(info->MCR); + local_irq_restore(flags); +} + +static const struct tty_port_operations amiga_port_ops = { + .carrier_raised = amiga_carrier_raised, + .dtr_rts = amiga_dtr_rts, +}; + +/* + * The serial driver boot-time initialization code! + */ +static int __init amiga_serial_probe(struct platform_device *pdev) +{ + unsigned long flags; + struct serial_state * state; + int error; + + serial_driver = alloc_tty_driver(NR_PORTS); + if (!serial_driver) + return -ENOMEM; + + show_serial_version(); + + /* Initialize the tty_driver structure */ + + serial_driver->driver_name = "amiserial"; + serial_driver->name = "ttyS"; + serial_driver->major = TTY_MAJOR; + serial_driver->minor_start = 64; + serial_driver->type = TTY_DRIVER_TYPE_SERIAL; + serial_driver->subtype = SERIAL_TYPE_NORMAL; + serial_driver->init_termios = tty_std_termios; + serial_driver->init_termios.c_cflag = + B9600 | CS8 | CREAD | HUPCL | CLOCAL; + serial_driver->flags = TTY_DRIVER_REAL_RAW; + tty_set_operations(serial_driver, &serial_ops); + + state = rs_table; + state->port = (int)&custom.serdatr; /* Just to give it a value */ + state->custom_divisor = 0; + state->icount.cts = state->icount.dsr = + state->icount.rng = state->icount.dcd = 0; + state->icount.rx = state->icount.tx = 0; + state->icount.frame = state->icount.parity = 0; + state->icount.overrun = state->icount.brk = 0; + tty_port_init(&state->tport); + state->tport.ops = &amiga_port_ops; + tty_port_link_device(&state->tport, serial_driver, 0); + + error = tty_register_driver(serial_driver); + if (error) + goto fail_put_tty_driver; + + printk(KERN_INFO "ttyS0 is the amiga builtin serial port\n"); + + /* Hardware set up */ + + state->baud_base = amiga_colorclock; + state->xmit_fifo_size = 1; + + /* set ISRs, and then disable the rx interrupts */ + error = request_irq(IRQ_AMIGA_TBE, ser_tx_int, 0, "serial TX", state); + if (error) + goto fail_unregister; + + error = request_irq(IRQ_AMIGA_RBF, ser_rx_int, 0, + "serial RX", state); + if (error) + goto fail_free_irq; + + local_irq_save(flags); + + /* turn off Rx and Tx interrupts */ + custom.intena = IF_RBF | IF_TBE; + mb(); + + /* clear any pending interrupt */ + custom.intreq = IF_RBF | IF_TBE; + mb(); + + local_irq_restore(flags); + + /* + * set the appropriate directions for the modem control flags, + * and clear RTS and DTR + */ + ciab.ddra |= (SER_DTR | SER_RTS); /* outputs */ + ciab.ddra &= ~(SER_DCD | SER_CTS | SER_DSR); /* inputs */ + + platform_set_drvdata(pdev, state); + + return 0; + +fail_free_irq: + free_irq(IRQ_AMIGA_TBE, state); +fail_unregister: + tty_unregister_driver(serial_driver); +fail_put_tty_driver: + tty_port_destroy(&state->tport); + put_tty_driver(serial_driver); + return error; +} + +static int __exit amiga_serial_remove(struct platform_device *pdev) +{ + int error; + struct serial_state *state = platform_get_drvdata(pdev); + + /* printk("Unloading %s: version %s\n", serial_name, serial_version); */ + error = tty_unregister_driver(serial_driver); + if (error) + printk("SERIAL: failed to unregister serial driver (%d)\n", + error); + put_tty_driver(serial_driver); + tty_port_destroy(&state->tport); + + free_irq(IRQ_AMIGA_TBE, state); + free_irq(IRQ_AMIGA_RBF, state); + + return error; +} + +static struct platform_driver amiga_serial_driver = { + .remove = __exit_p(amiga_serial_remove), + .driver = { + .name = "amiga-serial", + }, +}; + +module_platform_driver_probe(amiga_serial_driver, amiga_serial_probe); + + +#if defined(CONFIG_SERIAL_CONSOLE) && !defined(MODULE) + +/* + * ------------------------------------------------------------ + * Serial console driver + * ------------------------------------------------------------ + */ + +static void amiga_serial_putc(char c) +{ + custom.serdat = (unsigned char)c | 0x100; + while (!(custom.serdatr & 0x2000)) + barrier(); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console must be locked when we get here. + */ +static void serial_console_write(struct console *co, const char *s, + unsigned count) +{ + unsigned short intena = custom.intenar; + + custom.intena = IF_TBE; + + while (count--) { + if (*s == '\n') + amiga_serial_putc('\r'); + amiga_serial_putc(*s++); + } + + custom.intena = IF_SETCLR | (intena & IF_TBE); +} + +static struct tty_driver *serial_console_device(struct console *c, int *index) +{ + *index = 0; + return serial_driver; +} + +static struct console sercons = { + .name = "ttyS", + .write = serial_console_write, + .device = serial_console_device, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + +/* + * Register console. + */ +static int __init amiserial_console_init(void) +{ + if (!MACH_IS_AMIGA) + return -ENODEV; + + register_console(&sercons); + return 0; +} +console_initcall(amiserial_console_init); + +#endif /* CONFIG_SERIAL_CONSOLE && !MODULE */ + +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:amiga-serial"); diff --git a/drivers/tty/cyclades.c b/drivers/tty/cyclades.c new file mode 100644 index 000000000..4bcaab250 --- /dev/null +++ b/drivers/tty/cyclades.c @@ -0,0 +1,4119 @@ +// SPDX-License-Identifier: GPL-2.0 +#undef BLOCKMOVE +#define Z_WAKE +#undef Z_EXT_CHARS_IN_BUFFER + +/* + * This file contains the driver for the Cyclades async multiport + * serial boards. + * + * Initially written by Randolph Bentson . + * Modified and maintained by Marcio Saito . + * + * Copyright (C) 2007-2009 Jiri Slaby + * + * Much of the design and some of the code came from serial.c + * which was copyright (C) 1991, 1992 Linus Torvalds. It was + * extensively rewritten by Theodore Ts'o, 8/16/92 -- 9/14/92, + * and then fixed as suggested by Michael K. Johnson 12/12/92. + * Converted to pci probing and cleaned up by Jiri Slaby. + * + */ + +#define CY_VERSION "2.6" + +/* If you need to install more boards than NR_CARDS, change the constant + in the definition below. No other change is necessary to support up to + eight boards. Beyond that you'll have to extend cy_isa_addresses. */ + +#define NR_CARDS 4 + +/* + If the total number of ports is larger than NR_PORTS, change this + constant in the definition below. No other change is necessary to + support more boards/ports. */ + +#define NR_PORTS 256 + +#define ZO_V1 0 +#define ZO_V2 1 +#define ZE_V1 2 + +#define SERIAL_PARANOIA_CHECK +#undef CY_DEBUG_OPEN +#undef CY_DEBUG_THROTTLE +#undef CY_DEBUG_OTHER +#undef CY_DEBUG_IO +#undef CY_DEBUG_COUNT +#undef CY_DEBUG_DTR +#undef CY_DEBUG_INTERRUPTS +#undef CY_16Y_HACK +#undef CY_ENABLE_MONITORING +#undef CY_PCI_DEBUG + +/* + * Include section + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +#include +#include +#include + +static void cy_send_xchar(struct tty_struct *tty, char ch); + +#ifndef SERIAL_XMIT_SIZE +#define SERIAL_XMIT_SIZE (min(PAGE_SIZE, 4096)) +#endif + +/* firmware stuff */ +#define ZL_MAX_BLOCKS 16 +#define DRIVER_VERSION 0x02010203 +#define RAM_SIZE 0x80000 + +enum zblock_type { + ZBLOCK_PRG = 0, + ZBLOCK_FPGA = 1 +}; + +struct zfile_header { + char name[64]; + char date[32]; + char aux[32]; + u32 n_config; + u32 config_offset; + u32 n_blocks; + u32 block_offset; + u32 reserved[9]; +} __attribute__ ((packed)); + +struct zfile_config { + char name[64]; + u32 mailbox; + u32 function; + u32 n_blocks; + u32 block_list[ZL_MAX_BLOCKS]; +} __attribute__ ((packed)); + +struct zfile_block { + u32 type; + u32 file_offset; + u32 ram_offset; + u32 size; +} __attribute__ ((packed)); + +static struct tty_driver *cy_serial_driver; + +#ifdef CONFIG_ISA +/* This is the address lookup table. The driver will probe for + Cyclom-Y/ISA boards at all addresses in here. If you want the + driver to probe addresses at a different address, add it to + this table. If the driver is probing some other board and + causing problems, remove the offending address from this table. +*/ + +static unsigned int cy_isa_addresses[] = { + 0xD0000, + 0xD2000, + 0xD4000, + 0xD6000, + 0xD8000, + 0xDA000, + 0xDC000, + 0xDE000, + 0, 0, 0, 0, 0, 0, 0, 0 +}; + +#define NR_ISA_ADDRS ARRAY_SIZE(cy_isa_addresses) + +static long maddr[NR_CARDS]; +static int irq[NR_CARDS]; + +module_param_hw_array(maddr, long, iomem, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); + +#endif /* CONFIG_ISA */ + +/* This is the per-card data structure containing address, irq, number of + channels, etc. This driver supports a maximum of NR_CARDS cards. +*/ +static struct cyclades_card cy_card[NR_CARDS]; + +static int cy_next_channel; /* next minor available */ + +/* + * This is used to look up the divisor speeds and the timeouts + * We're normally limited to 15 distinct baud rates. The extra + * are accessed via settings in info->port.flags. + * 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, + * 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, + * HI VHI + * 20 + */ +static const int baud_table[] = { + 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, + 1800, 2400, 4800, 9600, 19200, 38400, 57600, 76800, 115200, 150000, + 230400, 0 +}; + +static const char baud_co_25[] = { /* 25 MHz clock option table */ + /* value => 00 01 02 03 04 */ + /* divide by 8 32 128 512 2048 */ + 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03, 0x03, 0x02, + 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 +}; + +static const char baud_bpr_25[] = { /* 25 MHz baud rate period table */ + 0x00, 0xf5, 0xa3, 0x6f, 0x5c, 0x51, 0xf5, 0xa3, 0x51, 0xa3, + 0x6d, 0x51, 0xa3, 0x51, 0xa3, 0x51, 0x36, 0x29, 0x1b, 0x15 +}; + +static const char baud_co_60[] = { /* 60 MHz clock option table (CD1400 J) */ + /* value => 00 01 02 03 04 */ + /* divide by 8 32 128 512 2048 */ + 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03, + 0x03, 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00 +}; + +static const char baud_bpr_60[] = { /* 60 MHz baud rate period table (CD1400 J) */ + 0x00, 0x82, 0x21, 0xff, 0xdb, 0xc3, 0x92, 0x62, 0xc3, 0x62, + 0x41, 0xc3, 0x62, 0xc3, 0x62, 0xc3, 0x82, 0x62, 0x41, 0x32, + 0x21 +}; + +static const char baud_cor3[] = { /* receive threshold */ + 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, + 0x0a, 0x0a, 0x0a, 0x09, 0x09, 0x08, 0x08, 0x08, 0x08, 0x07, + 0x07 +}; + +/* + * The Cyclades driver implements HW flow control as any serial driver. + * The cyclades_port structure member rflow and the vector rflow_thr + * allows us to take advantage of a special feature in the CD1400 to avoid + * data loss even when the system interrupt latency is too high. These flags + * are to be used only with very special applications. Setting these flags + * requires the use of a special cable (DTR and RTS reversed). In the new + * CD1400-based boards (rev. 6.00 or later), there is no need for special + * cables. + */ + +static const char rflow_thr[] = { /* rflow threshold */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, + 0x0a +}; + +/* The Cyclom-Ye has placed the sequential chips in non-sequential + * address order. This look-up table overcomes that problem. + */ +static const unsigned int cy_chip_offset[] = { 0x0000, + 0x0400, + 0x0800, + 0x0C00, + 0x0200, + 0x0600, + 0x0A00, + 0x0E00 +}; + +/* PCI related definitions */ + +#ifdef CONFIG_PCI +static const struct pci_device_id cy_pci_dev_id[] = { + /* PCI < 1Mb */ + { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Y_Lo) }, + /* PCI > 1Mb */ + { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Y_Hi) }, + /* 4Y PCI < 1Mb */ + { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_4Y_Lo) }, + /* 4Y PCI > 1Mb */ + { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_4Y_Hi) }, + /* 8Y PCI < 1Mb */ + { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_8Y_Lo) }, + /* 8Y PCI > 1Mb */ + { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_8Y_Hi) }, + /* Z PCI < 1Mb */ + { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Z_Lo) }, + /* Z PCI > 1Mb */ + { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Z_Hi) }, + { } /* end of table */ +}; +MODULE_DEVICE_TABLE(pci, cy_pci_dev_id); +#endif + +static void cy_start(struct tty_struct *); +static void cy_set_line_char(struct cyclades_port *, struct tty_struct *); +static int cyz_issue_cmd(struct cyclades_card *, __u32, __u8, __u32); +#ifdef CONFIG_ISA +static unsigned detect_isa_irq(void __iomem *); +#endif /* CONFIG_ISA */ + +#ifndef CONFIG_CYZ_INTR +static void cyz_poll(struct timer_list *); + +/* The Cyclades-Z polling cycle is defined by this variable */ +static long cyz_polling_cycle = CZ_DEF_POLL; + +static DEFINE_TIMER(cyz_timerlist, cyz_poll); + +#else /* CONFIG_CYZ_INTR */ +static void cyz_rx_restart(struct timer_list *); +#endif /* CONFIG_CYZ_INTR */ + +static void cyy_writeb(struct cyclades_port *port, u32 reg, u8 val) +{ + struct cyclades_card *card = port->card; + + cy_writeb(port->u.cyy.base_addr + (reg << card->bus_index), val); +} + +static u8 cyy_readb(struct cyclades_port *port, u32 reg) +{ + struct cyclades_card *card = port->card; + + return readb(port->u.cyy.base_addr + (reg << card->bus_index)); +} + +static inline bool cy_is_Z(struct cyclades_card *card) +{ + return card->num_chips == (unsigned int)-1; +} + +static inline bool __cyz_fpga_loaded(struct RUNTIME_9060 __iomem *ctl_addr) +{ + return readl(&ctl_addr->init_ctrl) & (1 << 17); +} + +static inline bool cyz_fpga_loaded(struct cyclades_card *card) +{ + return __cyz_fpga_loaded(card->ctl_addr.p9060); +} + +static bool cyz_is_loaded(struct cyclades_card *card) +{ + struct FIRM_ID __iomem *fw_id = card->base_addr + ID_ADDRESS; + + return (card->hw_ver == ZO_V1 || cyz_fpga_loaded(card)) && + readl(&fw_id->signature) == ZFIRM_ID; +} + +static int serial_paranoia_check(struct cyclades_port *info, + const char *name, const char *routine) +{ +#ifdef SERIAL_PARANOIA_CHECK + if (!info) { + printk(KERN_WARNING "cyc Warning: null cyclades_port for (%s) " + "in %s\n", name, routine); + return 1; + } + + if (info->magic != CYCLADES_MAGIC) { + printk(KERN_WARNING "cyc Warning: bad magic number for serial " + "struct (%s) in %s\n", name, routine); + return 1; + } +#endif + return 0; +} + +/***********************************************************/ +/********* Start of block of Cyclom-Y specific code ********/ + +/* This routine waits up to 1000 micro-seconds for the previous + command to the Cirrus chip to complete and then issues the + new command. An error is returned if the previous command + didn't finish within the time limit. + + This function is only called from inside spinlock-protected code. + */ +static int __cyy_issue_cmd(void __iomem *base_addr, u8 cmd, int index) +{ + void __iomem *ccr = base_addr + (CyCCR << index); + unsigned int i; + + /* Check to see that the previous command has completed */ + for (i = 0; i < 100; i++) { + if (readb(ccr) == 0) + break; + udelay(10L); + } + /* if the CCR never cleared, the previous command + didn't finish within the "reasonable time" */ + if (i == 100) + return -1; + + /* Issue the new command */ + cy_writeb(ccr, cmd); + + return 0; +} + +static inline int cyy_issue_cmd(struct cyclades_port *port, u8 cmd) +{ + return __cyy_issue_cmd(port->u.cyy.base_addr, cmd, + port->card->bus_index); +} + +#ifdef CONFIG_ISA +/* ISA interrupt detection code */ +static unsigned detect_isa_irq(void __iomem *address) +{ + int irq; + unsigned long irqs, flags; + int save_xir, save_car; + int index = 0; /* IRQ probing is only for ISA */ + + /* forget possible initially masked and pending IRQ */ + irq = probe_irq_off(probe_irq_on()); + + /* Clear interrupts on the board first */ + cy_writeb(address + (Cy_ClrIntr << index), 0); + /* Cy_ClrIntr is 0x1800 */ + + irqs = probe_irq_on(); + /* Wait ... */ + msleep(5); + + /* Enable the Tx interrupts on the CD1400 */ + local_irq_save(flags); + cy_writeb(address + (CyCAR << index), 0); + __cyy_issue_cmd(address, CyCHAN_CTL | CyENB_XMTR, index); + + cy_writeb(address + (CyCAR << index), 0); + cy_writeb(address + (CySRER << index), + readb(address + (CySRER << index)) | CyTxRdy); + local_irq_restore(flags); + + /* Wait ... */ + msleep(5); + + /* Check which interrupt is in use */ + irq = probe_irq_off(irqs); + + /* Clean up */ + save_xir = (u_char) readb(address + (CyTIR << index)); + save_car = readb(address + (CyCAR << index)); + cy_writeb(address + (CyCAR << index), (save_xir & 0x3)); + cy_writeb(address + (CySRER << index), + readb(address + (CySRER << index)) & ~CyTxRdy); + cy_writeb(address + (CyTIR << index), (save_xir & 0x3f)); + cy_writeb(address + (CyCAR << index), (save_car)); + cy_writeb(address + (Cy_ClrIntr << index), 0); + /* Cy_ClrIntr is 0x1800 */ + + return (irq > 0) ? irq : 0; +} +#endif /* CONFIG_ISA */ + +static void cyy_chip_rx(struct cyclades_card *cinfo, int chip, + void __iomem *base_addr) +{ + struct cyclades_port *info; + struct tty_port *port; + int len, index = cinfo->bus_index; + u8 ivr, save_xir, channel, save_car, data, char_count; + +#ifdef CY_DEBUG_INTERRUPTS + printk(KERN_DEBUG "cyy_interrupt: rcvd intr, chip %d\n", chip); +#endif + /* determine the channel & change to that context */ + save_xir = readb(base_addr + (CyRIR << index)); + channel = save_xir & CyIRChannel; + info = &cinfo->ports[channel + chip * 4]; + port = &info->port; + save_car = cyy_readb(info, CyCAR); + cyy_writeb(info, CyCAR, save_xir); + ivr = cyy_readb(info, CyRIVR) & CyIVRMask; + + /* there is an open port for this data */ + if (ivr == CyIVRRxEx) { /* exception */ + data = cyy_readb(info, CyRDSR); + + /* For statistics only */ + if (data & CyBREAK) + info->icount.brk++; + else if (data & CyFRAME) + info->icount.frame++; + else if (data & CyPARITY) + info->icount.parity++; + else if (data & CyOVERRUN) + info->icount.overrun++; + + if (data & info->ignore_status_mask) { + info->icount.rx++; + return; + } + if (tty_buffer_request_room(port, 1)) { + if (data & info->read_status_mask) { + if (data & CyBREAK) { + tty_insert_flip_char(port, + cyy_readb(info, CyRDSR), + TTY_BREAK); + info->icount.rx++; + if (port->flags & ASYNC_SAK) { + struct tty_struct *tty = + tty_port_tty_get(port); + if (tty) { + do_SAK(tty); + tty_kref_put(tty); + } + } + } else if (data & CyFRAME) { + tty_insert_flip_char(port, + cyy_readb(info, CyRDSR), + TTY_FRAME); + info->icount.rx++; + info->idle_stats.frame_errs++; + } else if (data & CyPARITY) { + /* Pieces of seven... */ + tty_insert_flip_char(port, + cyy_readb(info, CyRDSR), + TTY_PARITY); + info->icount.rx++; + info->idle_stats.parity_errs++; + } else if (data & CyOVERRUN) { + tty_insert_flip_char(port, 0, + TTY_OVERRUN); + info->icount.rx++; + /* If the flip buffer itself is + overflowing, we still lose + the next incoming character. + */ + tty_insert_flip_char(port, + cyy_readb(info, CyRDSR), + TTY_FRAME); + info->icount.rx++; + info->idle_stats.overruns++; + /* These two conditions may imply */ + /* a normal read should be done. */ + /* } else if(data & CyTIMEOUT) { */ + /* } else if(data & CySPECHAR) { */ + } else { + tty_insert_flip_char(port, 0, + TTY_NORMAL); + info->icount.rx++; + } + } else { + tty_insert_flip_char(port, 0, TTY_NORMAL); + info->icount.rx++; + } + } else { + /* there was a software buffer overrun and nothing + * could be done about it!!! */ + info->icount.buf_overrun++; + info->idle_stats.overruns++; + } + } else { /* normal character reception */ + /* load # chars available from the chip */ + char_count = cyy_readb(info, CyRDCR); + +#ifdef CY_ENABLE_MONITORING + ++info->mon.int_count; + info->mon.char_count += char_count; + if (char_count > info->mon.char_max) + info->mon.char_max = char_count; + info->mon.char_last = char_count; +#endif + len = tty_buffer_request_room(port, char_count); + while (len--) { + data = cyy_readb(info, CyRDSR); + tty_insert_flip_char(port, data, TTY_NORMAL); + info->idle_stats.recv_bytes++; + info->icount.rx++; +#ifdef CY_16Y_HACK + udelay(10L); +#endif + } + info->idle_stats.recv_idle = jiffies; + } + tty_flip_buffer_push(port); + + /* end of service */ + cyy_writeb(info, CyRIR, save_xir & 0x3f); + cyy_writeb(info, CyCAR, save_car); +} + +static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip, + void __iomem *base_addr) +{ + struct cyclades_port *info; + struct tty_struct *tty; + int char_count, index = cinfo->bus_index; + u8 save_xir, channel, save_car, outch; + + /* Since we only get here when the transmit buffer + is empty, we know we can always stuff a dozen + characters. */ +#ifdef CY_DEBUG_INTERRUPTS + printk(KERN_DEBUG "cyy_interrupt: xmit intr, chip %d\n", chip); +#endif + + /* determine the channel & change to that context */ + save_xir = readb(base_addr + (CyTIR << index)); + channel = save_xir & CyIRChannel; + save_car = readb(base_addr + (CyCAR << index)); + cy_writeb(base_addr + (CyCAR << index), save_xir); + + info = &cinfo->ports[channel + chip * 4]; + tty = tty_port_tty_get(&info->port); + if (tty == NULL) { + cyy_writeb(info, CySRER, cyy_readb(info, CySRER) & ~CyTxRdy); + goto end; + } + + /* load the on-chip space for outbound data */ + char_count = info->xmit_fifo_size; + + if (info->x_char) { /* send special char */ + outch = info->x_char; + cyy_writeb(info, CyTDR, outch); + char_count--; + info->icount.tx++; + info->x_char = 0; + } + + if (info->breakon || info->breakoff) { + if (info->breakon) { + cyy_writeb(info, CyTDR, 0); + cyy_writeb(info, CyTDR, 0x81); + info->breakon = 0; + char_count -= 2; + } + if (info->breakoff) { + cyy_writeb(info, CyTDR, 0); + cyy_writeb(info, CyTDR, 0x83); + info->breakoff = 0; + char_count -= 2; + } + } + + while (char_count-- > 0) { + if (!info->xmit_cnt) { + if (cyy_readb(info, CySRER) & CyTxMpty) { + cyy_writeb(info, CySRER, + cyy_readb(info, CySRER) & ~CyTxMpty); + } else { + cyy_writeb(info, CySRER, CyTxMpty | + (cyy_readb(info, CySRER) & ~CyTxRdy)); + } + goto done; + } + if (info->port.xmit_buf == NULL) { + cyy_writeb(info, CySRER, + cyy_readb(info, CySRER) & ~CyTxRdy); + goto done; + } + if (tty->stopped || tty->hw_stopped) { + cyy_writeb(info, CySRER, + cyy_readb(info, CySRER) & ~CyTxRdy); + goto done; + } + /* Because the Embedded Transmit Commands have been enabled, + * we must check to see if the escape character, NULL, is being + * sent. If it is, we must ensure that there is room for it to + * be doubled in the output stream. Therefore we no longer + * advance the pointer when the character is fetched, but + * rather wait until after the check for a NULL output + * character. This is necessary because there may not be room + * for the two chars needed to send a NULL.) + */ + outch = info->port.xmit_buf[info->xmit_tail]; + if (outch) { + info->xmit_cnt--; + info->xmit_tail = (info->xmit_tail + 1) & + (SERIAL_XMIT_SIZE - 1); + cyy_writeb(info, CyTDR, outch); + info->icount.tx++; + } else { + if (char_count > 1) { + info->xmit_cnt--; + info->xmit_tail = (info->xmit_tail + 1) & + (SERIAL_XMIT_SIZE - 1); + cyy_writeb(info, CyTDR, outch); + cyy_writeb(info, CyTDR, 0); + info->icount.tx++; + char_count--; + } + } + } + +done: + tty_wakeup(tty); + tty_kref_put(tty); +end: + /* end of service */ + cyy_writeb(info, CyTIR, save_xir & 0x3f); + cyy_writeb(info, CyCAR, save_car); +} + +static void cyy_chip_modem(struct cyclades_card *cinfo, int chip, + void __iomem *base_addr) +{ + struct cyclades_port *info; + struct tty_struct *tty; + int index = cinfo->bus_index; + u8 save_xir, channel, save_car, mdm_change, mdm_status; + + /* determine the channel & change to that context */ + save_xir = readb(base_addr + (CyMIR << index)); + channel = save_xir & CyIRChannel; + info = &cinfo->ports[channel + chip * 4]; + save_car = cyy_readb(info, CyCAR); + cyy_writeb(info, CyCAR, save_xir); + + mdm_change = cyy_readb(info, CyMISR); + mdm_status = cyy_readb(info, CyMSVR1); + + tty = tty_port_tty_get(&info->port); + if (!tty) + goto end; + + if (mdm_change & CyANY_DELTA) { + /* For statistics only */ + if (mdm_change & CyDCD) + info->icount.dcd++; + if (mdm_change & CyCTS) + info->icount.cts++; + if (mdm_change & CyDSR) + info->icount.dsr++; + if (mdm_change & CyRI) + info->icount.rng++; + + wake_up_interruptible(&info->port.delta_msr_wait); + } + + if ((mdm_change & CyDCD) && tty_port_check_carrier(&info->port)) { + if (mdm_status & CyDCD) + wake_up_interruptible(&info->port.open_wait); + else + tty_hangup(tty); + } + if ((mdm_change & CyCTS) && tty_port_cts_enabled(&info->port)) { + if (tty->hw_stopped) { + if (mdm_status & CyCTS) { + /* cy_start isn't used + because... !!! */ + tty->hw_stopped = 0; + cyy_writeb(info, CySRER, + cyy_readb(info, CySRER) | CyTxRdy); + tty_wakeup(tty); + } + } else { + if (!(mdm_status & CyCTS)) { + /* cy_stop isn't used + because ... !!! */ + tty->hw_stopped = 1; + cyy_writeb(info, CySRER, + cyy_readb(info, CySRER) & ~CyTxRdy); + } + } + } +/* if (mdm_change & CyDSR) { + } + if (mdm_change & CyRI) { + }*/ + tty_kref_put(tty); +end: + /* end of service */ + cyy_writeb(info, CyMIR, save_xir & 0x3f); + cyy_writeb(info, CyCAR, save_car); +} + +/* The real interrupt service routine is called + whenever the card wants its hand held--chars + received, out buffer empty, modem change, etc. + */ +static irqreturn_t cyy_interrupt(int irq, void *dev_id) +{ + int status; + struct cyclades_card *cinfo = dev_id; + void __iomem *base_addr, *card_base_addr; + unsigned int chip, too_many, had_work; + int index; + + if (unlikely(cinfo == NULL)) { +#ifdef CY_DEBUG_INTERRUPTS + printk(KERN_DEBUG "cyy_interrupt: spurious interrupt %d\n", + irq); +#endif + return IRQ_NONE; /* spurious interrupt */ + } + + card_base_addr = cinfo->base_addr; + index = cinfo->bus_index; + + /* card was not initialized yet (e.g. DEBUG_SHIRQ) */ + if (unlikely(card_base_addr == NULL)) + return IRQ_HANDLED; + + /* This loop checks all chips in the card. Make a note whenever + _any_ chip had some work to do, as this is considered an + indication that there will be more to do. Only when no chip + has any work does this outermost loop exit. + */ + do { + had_work = 0; + for (chip = 0; chip < cinfo->num_chips; chip++) { + base_addr = cinfo->base_addr + + (cy_chip_offset[chip] << index); + too_many = 0; + while ((status = readb(base_addr + + (CySVRR << index))) != 0x00) { + had_work++; + /* The purpose of the following test is to ensure that + no chip can monopolize the driver. This forces the + chips to be checked in a round-robin fashion (after + draining each of a bunch (1000) of characters). + */ + if (1000 < too_many++) + break; + spin_lock(&cinfo->card_lock); + if (status & CySRReceive) /* rx intr */ + cyy_chip_rx(cinfo, chip, base_addr); + if (status & CySRTransmit) /* tx intr */ + cyy_chip_tx(cinfo, chip, base_addr); + if (status & CySRModem) /* modem intr */ + cyy_chip_modem(cinfo, chip, base_addr); + spin_unlock(&cinfo->card_lock); + } + } + } while (had_work); + + /* clear interrupts */ + spin_lock(&cinfo->card_lock); + cy_writeb(card_base_addr + (Cy_ClrIntr << index), 0); + /* Cy_ClrIntr is 0x1800 */ + spin_unlock(&cinfo->card_lock); + return IRQ_HANDLED; +} /* cyy_interrupt */ + +static void cyy_change_rts_dtr(struct cyclades_port *info, unsigned int set, + unsigned int clear) +{ + struct cyclades_card *card = info->card; + int channel = info->line - card->first_line; + u32 rts, dtr, msvrr, msvrd; + + channel &= 0x03; + + if (info->rtsdtr_inv) { + msvrr = CyMSVR2; + msvrd = CyMSVR1; + rts = CyDTR; + dtr = CyRTS; + } else { + msvrr = CyMSVR1; + msvrd = CyMSVR2; + rts = CyRTS; + dtr = CyDTR; + } + if (set & TIOCM_RTS) { + cyy_writeb(info, CyCAR, channel); + cyy_writeb(info, msvrr, rts); + } + if (clear & TIOCM_RTS) { + cyy_writeb(info, CyCAR, channel); + cyy_writeb(info, msvrr, ~rts); + } + if (set & TIOCM_DTR) { + cyy_writeb(info, CyCAR, channel); + cyy_writeb(info, msvrd, dtr); +#ifdef CY_DEBUG_DTR + printk(KERN_DEBUG "cyc:set_modem_info raising DTR\n"); + printk(KERN_DEBUG " status: 0x%x, 0x%x\n", + cyy_readb(info, CyMSVR1), + cyy_readb(info, CyMSVR2)); +#endif + } + if (clear & TIOCM_DTR) { + cyy_writeb(info, CyCAR, channel); + cyy_writeb(info, msvrd, ~dtr); +#ifdef CY_DEBUG_DTR + printk(KERN_DEBUG "cyc:set_modem_info dropping DTR\n"); + printk(KERN_DEBUG " status: 0x%x, 0x%x\n", + cyy_readb(info, CyMSVR1), + cyy_readb(info, CyMSVR2)); +#endif + } +} + +/***********************************************************/ +/********* End of block of Cyclom-Y specific code **********/ +/******** Start of block of Cyclades-Z specific code *******/ +/***********************************************************/ + +static int +cyz_fetch_msg(struct cyclades_card *cinfo, + __u32 *channel, __u8 *cmd, __u32 *param) +{ + struct BOARD_CTRL __iomem *board_ctrl = cinfo->board_ctrl; + unsigned long loc_doorbell; + + loc_doorbell = readl(&cinfo->ctl_addr.p9060->loc_doorbell); + if (loc_doorbell) { + *cmd = (char)(0xff & loc_doorbell); + *channel = readl(&board_ctrl->fwcmd_channel); + *param = (__u32) readl(&board_ctrl->fwcmd_param); + cy_writel(&cinfo->ctl_addr.p9060->loc_doorbell, 0xffffffff); + return 1; + } + return 0; +} /* cyz_fetch_msg */ + +static int +cyz_issue_cmd(struct cyclades_card *cinfo, + __u32 channel, __u8 cmd, __u32 param) +{ + struct BOARD_CTRL __iomem *board_ctrl = cinfo->board_ctrl; + __u32 __iomem *pci_doorbell; + unsigned int index; + + if (!cyz_is_loaded(cinfo)) + return -1; + + index = 0; + pci_doorbell = &cinfo->ctl_addr.p9060->pci_doorbell; + while ((readl(pci_doorbell) & 0xff) != 0) { + if (index++ == 1000) + return (int)(readl(pci_doorbell) & 0xff); + udelay(50L); + } + cy_writel(&board_ctrl->hcmd_channel, channel); + cy_writel(&board_ctrl->hcmd_param, param); + cy_writel(pci_doorbell, (long)cmd); + + return 0; +} /* cyz_issue_cmd */ + +static void cyz_handle_rx(struct cyclades_port *info) +{ + struct BUF_CTRL __iomem *buf_ctrl = info->u.cyz.buf_ctrl; + struct cyclades_card *cinfo = info->card; + struct tty_port *port = &info->port; + unsigned int char_count; + int len; +#ifdef BLOCKMOVE + unsigned char *buf; +#else + char data; +#endif + __u32 rx_put, rx_get, new_rx_get, rx_bufsize, rx_bufaddr; + + rx_get = new_rx_get = readl(&buf_ctrl->rx_get); + rx_put = readl(&buf_ctrl->rx_put); + rx_bufsize = readl(&buf_ctrl->rx_bufsize); + rx_bufaddr = readl(&buf_ctrl->rx_bufaddr); + if (rx_put >= rx_get) + char_count = rx_put - rx_get; + else + char_count = rx_put - rx_get + rx_bufsize; + + if (!char_count) + return; + +#ifdef CY_ENABLE_MONITORING + info->mon.int_count++; + info->mon.char_count += char_count; + if (char_count > info->mon.char_max) + info->mon.char_max = char_count; + info->mon.char_last = char_count; +#endif + +#ifdef BLOCKMOVE + /* we'd like to use memcpy(t, f, n) and memset(s, c, count) + for performance, but because of buffer boundaries, there + may be several steps to the operation */ + while (1) { + len = tty_prepare_flip_string(port, &buf, + char_count); + if (!len) + break; + + len = min_t(unsigned int, min(len, char_count), + rx_bufsize - new_rx_get); + + memcpy_fromio(buf, cinfo->base_addr + + rx_bufaddr + new_rx_get, len); + + new_rx_get = (new_rx_get + len) & + (rx_bufsize - 1); + char_count -= len; + info->icount.rx += len; + info->idle_stats.recv_bytes += len; + } +#else + len = tty_buffer_request_room(port, char_count); + while (len--) { + data = readb(cinfo->base_addr + rx_bufaddr + + new_rx_get); + new_rx_get = (new_rx_get + 1) & + (rx_bufsize - 1); + tty_insert_flip_char(port, data, TTY_NORMAL); + info->idle_stats.recv_bytes++; + info->icount.rx++; + } +#endif +#ifdef CONFIG_CYZ_INTR + /* Recalculate the number of chars in the RX buffer and issue + a cmd in case it's higher than the RX high water mark */ + rx_put = readl(&buf_ctrl->rx_put); + if (rx_put >= rx_get) + char_count = rx_put - rx_get; + else + char_count = rx_put - rx_get + rx_bufsize; + if (char_count >= readl(&buf_ctrl->rx_threshold) && + !timer_pending(&info->rx_full_timer)) + mod_timer(&info->rx_full_timer, jiffies + 1); +#endif + info->idle_stats.recv_idle = jiffies; + tty_flip_buffer_push(&info->port); + + /* Update rx_get */ + cy_writel(&buf_ctrl->rx_get, new_rx_get); +} + +static void cyz_handle_tx(struct cyclades_port *info) +{ + struct BUF_CTRL __iomem *buf_ctrl = info->u.cyz.buf_ctrl; + struct cyclades_card *cinfo = info->card; + struct tty_struct *tty; + u8 data; + unsigned int char_count; +#ifdef BLOCKMOVE + int small_count; +#endif + __u32 tx_put, tx_get, tx_bufsize, tx_bufaddr; + + if (info->xmit_cnt <= 0) /* Nothing to transmit */ + return; + + tx_get = readl(&buf_ctrl->tx_get); + tx_put = readl(&buf_ctrl->tx_put); + tx_bufsize = readl(&buf_ctrl->tx_bufsize); + tx_bufaddr = readl(&buf_ctrl->tx_bufaddr); + if (tx_put >= tx_get) + char_count = tx_get - tx_put - 1 + tx_bufsize; + else + char_count = tx_get - tx_put - 1; + + if (!char_count) + return; + + tty = tty_port_tty_get(&info->port); + if (tty == NULL) + goto ztxdone; + + if (info->x_char) { /* send special char */ + data = info->x_char; + + cy_writeb(cinfo->base_addr + tx_bufaddr + tx_put, data); + tx_put = (tx_put + 1) & (tx_bufsize - 1); + info->x_char = 0; + char_count--; + info->icount.tx++; + } +#ifdef BLOCKMOVE + while (0 < (small_count = min_t(unsigned int, + tx_bufsize - tx_put, min_t(unsigned int, + (SERIAL_XMIT_SIZE - info->xmit_tail), + min_t(unsigned int, info->xmit_cnt, + char_count))))) { + + memcpy_toio((char *)(cinfo->base_addr + tx_bufaddr + tx_put), + &info->port.xmit_buf[info->xmit_tail], + small_count); + + tx_put = (tx_put + small_count) & (tx_bufsize - 1); + char_count -= small_count; + info->icount.tx += small_count; + info->xmit_cnt -= small_count; + info->xmit_tail = (info->xmit_tail + small_count) & + (SERIAL_XMIT_SIZE - 1); + } +#else + while (info->xmit_cnt && char_count) { + data = info->port.xmit_buf[info->xmit_tail]; + info->xmit_cnt--; + info->xmit_tail = (info->xmit_tail + 1) & + (SERIAL_XMIT_SIZE - 1); + + cy_writeb(cinfo->base_addr + tx_bufaddr + tx_put, data); + tx_put = (tx_put + 1) & (tx_bufsize - 1); + char_count--; + info->icount.tx++; + } +#endif + tty_wakeup(tty); + tty_kref_put(tty); +ztxdone: + /* Update tx_put */ + cy_writel(&buf_ctrl->tx_put, tx_put); +} + +static void cyz_handle_cmd(struct cyclades_card *cinfo) +{ + struct BOARD_CTRL __iomem *board_ctrl = cinfo->board_ctrl; + struct cyclades_port *info; + __u32 channel, param, fw_ver; + __u8 cmd; + int special_count; + int delta_count; + + fw_ver = readl(&board_ctrl->fw_version); + + while (cyz_fetch_msg(cinfo, &channel, &cmd, ¶m) == 1) { + special_count = 0; + delta_count = 0; + info = &cinfo->ports[channel]; + + switch (cmd) { + case C_CM_PR_ERROR: + tty_insert_flip_char(&info->port, 0, TTY_PARITY); + info->icount.rx++; + special_count++; + break; + case C_CM_FR_ERROR: + tty_insert_flip_char(&info->port, 0, TTY_FRAME); + info->icount.rx++; + special_count++; + break; + case C_CM_RXBRK: + tty_insert_flip_char(&info->port, 0, TTY_BREAK); + info->icount.rx++; + special_count++; + break; + case C_CM_MDCD: + info->icount.dcd++; + delta_count++; + if (tty_port_check_carrier(&info->port)) { + u32 dcd = fw_ver > 241 ? param : + readl(&info->u.cyz.ch_ctrl->rs_status); + if (dcd & C_RS_DCD) + wake_up_interruptible(&info->port.open_wait); + else + tty_port_tty_hangup(&info->port, false); + } + break; + case C_CM_MCTS: + info->icount.cts++; + delta_count++; + break; + case C_CM_MRI: + info->icount.rng++; + delta_count++; + break; + case C_CM_MDSR: + info->icount.dsr++; + delta_count++; + break; +#ifdef Z_WAKE + case C_CM_IOCTLW: + complete(&info->shutdown_wait); + break; +#endif +#ifdef CONFIG_CYZ_INTR + case C_CM_RXHIWM: + case C_CM_RXNNDT: + case C_CM_INTBACK2: + /* Reception Interrupt */ +#ifdef CY_DEBUG_INTERRUPTS + printk(KERN_DEBUG "cyz_interrupt: rcvd intr, card %d, " + "port %ld\n", info->card, channel); +#endif + cyz_handle_rx(info); + break; + case C_CM_TXBEMPTY: + case C_CM_TXLOWWM: + case C_CM_INTBACK: + /* Transmission Interrupt */ +#ifdef CY_DEBUG_INTERRUPTS + printk(KERN_DEBUG "cyz_interrupt: xmit intr, card %d, " + "port %ld\n", info->card, channel); +#endif + cyz_handle_tx(info); + break; +#endif /* CONFIG_CYZ_INTR */ + case C_CM_FATAL: + /* should do something with this !!! */ + break; + default: + break; + } + if (delta_count) + wake_up_interruptible(&info->port.delta_msr_wait); + if (special_count) + tty_flip_buffer_push(&info->port); + } +} + +#ifdef CONFIG_CYZ_INTR +static irqreturn_t cyz_interrupt(int irq, void *dev_id) +{ + struct cyclades_card *cinfo = dev_id; + + if (unlikely(!cyz_is_loaded(cinfo))) { +#ifdef CY_DEBUG_INTERRUPTS + printk(KERN_DEBUG "cyz_interrupt: board not yet loaded " + "(IRQ%d).\n", irq); +#endif + return IRQ_NONE; + } + + /* Handle the interrupts */ + cyz_handle_cmd(cinfo); + + return IRQ_HANDLED; +} /* cyz_interrupt */ + +static void cyz_rx_restart(struct timer_list *t) +{ + struct cyclades_port *info = from_timer(info, t, rx_full_timer); + struct cyclades_card *card = info->card; + int retval; + __u32 channel = info->line - card->first_line; + unsigned long flags; + + spin_lock_irqsave(&card->card_lock, flags); + retval = cyz_issue_cmd(card, channel, C_CM_INTBACK2, 0L); + if (retval != 0) { + printk(KERN_ERR "cyc:cyz_rx_restart retval on ttyC%d was %x\n", + info->line, retval); + } + spin_unlock_irqrestore(&card->card_lock, flags); +} + +#else /* CONFIG_CYZ_INTR */ + +static void cyz_poll(struct timer_list *unused) +{ + struct cyclades_card *cinfo; + struct cyclades_port *info; + unsigned long expires = jiffies + HZ; + unsigned int port, card; + + for (card = 0; card < NR_CARDS; card++) { + cinfo = &cy_card[card]; + + if (!cy_is_Z(cinfo)) + continue; + if (!cyz_is_loaded(cinfo)) + continue; + + /* Skip first polling cycle to avoid racing conditions with the FW */ + if (!cinfo->intr_enabled) { + cinfo->intr_enabled = 1; + continue; + } + + cyz_handle_cmd(cinfo); + + for (port = 0; port < cinfo->nports; port++) { + info = &cinfo->ports[port]; + + if (!info->throttle) + cyz_handle_rx(info); + cyz_handle_tx(info); + } + /* poll every 'cyz_polling_cycle' period */ + expires = jiffies + cyz_polling_cycle; + } + mod_timer(&cyz_timerlist, expires); +} /* cyz_poll */ + +#endif /* CONFIG_CYZ_INTR */ + +/********** End of block of Cyclades-Z specific code *********/ +/***********************************************************/ + +/* This is called whenever a port becomes active; + interrupts are enabled and DTR & RTS are turned on. + */ +static int cy_startup(struct cyclades_port *info, struct tty_struct *tty) +{ + struct cyclades_card *card; + unsigned long flags; + int retval = 0; + int channel; + unsigned long page; + + card = info->card; + channel = info->line - card->first_line; + + page = get_zeroed_page(GFP_KERNEL); + if (!page) + return -ENOMEM; + + spin_lock_irqsave(&card->card_lock, flags); + + if (tty_port_initialized(&info->port)) + goto errout; + + if (!info->type) { + set_bit(TTY_IO_ERROR, &tty->flags); + goto errout; + } + + if (info->port.xmit_buf) + free_page(page); + else + info->port.xmit_buf = (unsigned char *)page; + + spin_unlock_irqrestore(&card->card_lock, flags); + + cy_set_line_char(info, tty); + + if (!cy_is_Z(card)) { + channel &= 0x03; + + spin_lock_irqsave(&card->card_lock, flags); + + cyy_writeb(info, CyCAR, channel); + + cyy_writeb(info, CyRTPR, + (info->default_timeout ? info->default_timeout : 0x02)); + /* 10ms rx timeout */ + + cyy_issue_cmd(info, CyCHAN_CTL | CyENB_RCVR | CyENB_XMTR); + + cyy_change_rts_dtr(info, TIOCM_RTS | TIOCM_DTR, 0); + + cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyRxData); + } else { + struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl; + + if (!cyz_is_loaded(card)) + return -ENODEV; + +#ifdef CY_DEBUG_OPEN + printk(KERN_DEBUG "cyc startup Z card %d, channel %d, " + "base_addr %p\n", card, channel, card->base_addr); +#endif + spin_lock_irqsave(&card->card_lock, flags); + + cy_writel(&ch_ctrl->op_mode, C_CH_ENABLE); +#ifdef Z_WAKE +#ifdef CONFIG_CYZ_INTR + cy_writel(&ch_ctrl->intr_enable, + C_IN_TXBEMPTY | C_IN_TXLOWWM | C_IN_RXHIWM | + C_IN_RXNNDT | C_IN_IOCTLW | C_IN_MDCD); +#else + cy_writel(&ch_ctrl->intr_enable, + C_IN_IOCTLW | C_IN_MDCD); +#endif /* CONFIG_CYZ_INTR */ +#else +#ifdef CONFIG_CYZ_INTR + cy_writel(&ch_ctrl->intr_enable, + C_IN_TXBEMPTY | C_IN_TXLOWWM | C_IN_RXHIWM | + C_IN_RXNNDT | C_IN_MDCD); +#else + cy_writel(&ch_ctrl->intr_enable, C_IN_MDCD); +#endif /* CONFIG_CYZ_INTR */ +#endif /* Z_WAKE */ + + retval = cyz_issue_cmd(card, channel, C_CM_IOCTL, 0L); + if (retval != 0) { + printk(KERN_ERR "cyc:startup(1) retval on ttyC%d was " + "%x\n", info->line, retval); + } + + /* Flush RX buffers before raising DTR and RTS */ + retval = cyz_issue_cmd(card, channel, C_CM_FLUSH_RX, 0L); + if (retval != 0) { + printk(KERN_ERR "cyc:startup(2) retval on ttyC%d was " + "%x\n", info->line, retval); + } + + /* set timeout !!! */ + /* set RTS and DTR !!! */ + tty_port_raise_dtr_rts(&info->port); + + /* enable send, recv, modem !!! */ + } + + tty_port_set_initialized(&info->port, 1); + + clear_bit(TTY_IO_ERROR, &tty->flags); + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + info->breakon = info->breakoff = 0; + memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats)); + info->idle_stats.in_use = + info->idle_stats.recv_idle = + info->idle_stats.xmit_idle = jiffies; + + spin_unlock_irqrestore(&card->card_lock, flags); + +#ifdef CY_DEBUG_OPEN + printk(KERN_DEBUG "cyc startup done\n"); +#endif + return 0; + +errout: + spin_unlock_irqrestore(&card->card_lock, flags); + free_page(page); + return retval; +} /* startup */ + +static void start_xmit(struct cyclades_port *info) +{ + struct cyclades_card *card = info->card; + unsigned long flags; + int channel = info->line - card->first_line; + + if (!cy_is_Z(card)) { + spin_lock_irqsave(&card->card_lock, flags); + cyy_writeb(info, CyCAR, channel & 0x03); + cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyTxRdy); + spin_unlock_irqrestore(&card->card_lock, flags); + } else { +#ifdef CONFIG_CYZ_INTR + int retval; + + spin_lock_irqsave(&card->card_lock, flags); + retval = cyz_issue_cmd(card, channel, C_CM_INTBACK, 0L); + if (retval != 0) { + printk(KERN_ERR "cyc:start_xmit retval on ttyC%d was " + "%x\n", info->line, retval); + } + spin_unlock_irqrestore(&card->card_lock, flags); +#else /* CONFIG_CYZ_INTR */ + /* Don't have to do anything at this time */ +#endif /* CONFIG_CYZ_INTR */ + } +} /* start_xmit */ + +/* + * This routine shuts down a serial port; interrupts are disabled, + * and DTR is dropped if the hangup on close termio flag is on. + */ +static void cy_shutdown(struct cyclades_port *info, struct tty_struct *tty) +{ + struct cyclades_card *card; + unsigned long flags; + + if (!tty_port_initialized(&info->port)) + return; + + card = info->card; + if (!cy_is_Z(card)) { + spin_lock_irqsave(&card->card_lock, flags); + + /* Clear delta_msr_wait queue to avoid mem leaks. */ + wake_up_interruptible(&info->port.delta_msr_wait); + + if (info->port.xmit_buf) { + unsigned char *temp; + temp = info->port.xmit_buf; + info->port.xmit_buf = NULL; + free_page((unsigned long)temp); + } + if (C_HUPCL(tty)) + cyy_change_rts_dtr(info, 0, TIOCM_RTS | TIOCM_DTR); + + cyy_issue_cmd(info, CyCHAN_CTL | CyDIS_RCVR); + /* it may be appropriate to clear _XMIT at + some later date (after testing)!!! */ + + set_bit(TTY_IO_ERROR, &tty->flags); + tty_port_set_initialized(&info->port, 0); + spin_unlock_irqrestore(&card->card_lock, flags); + } else { +#ifdef CY_DEBUG_OPEN + int channel = info->line - card->first_line; + printk(KERN_DEBUG "cyc shutdown Z card %d, channel %d, " + "base_addr %p\n", card, channel, card->base_addr); +#endif + + if (!cyz_is_loaded(card)) + return; + + spin_lock_irqsave(&card->card_lock, flags); + + if (info->port.xmit_buf) { + unsigned char *temp; + temp = info->port.xmit_buf; + info->port.xmit_buf = NULL; + free_page((unsigned long)temp); + } + + if (C_HUPCL(tty)) + tty_port_lower_dtr_rts(&info->port); + + set_bit(TTY_IO_ERROR, &tty->flags); + tty_port_set_initialized(&info->port, 0); + + spin_unlock_irqrestore(&card->card_lock, flags); + } + +#ifdef CY_DEBUG_OPEN + printk(KERN_DEBUG "cyc shutdown done\n"); +#endif +} /* shutdown */ + +/* + * ------------------------------------------------------------ + * cy_open() and friends + * ------------------------------------------------------------ + */ + +/* + * This routine is called whenever a serial port is opened. It + * performs the serial-specific initialization for the tty structure. + */ +static int cy_open(struct tty_struct *tty, struct file *filp) +{ + struct cyclades_port *info; + unsigned int i, line = tty->index; + int retval; + + for (i = 0; i < NR_CARDS; i++) + if (line < cy_card[i].first_line + cy_card[i].nports && + line >= cy_card[i].first_line) + break; + if (i >= NR_CARDS) + return -ENODEV; + info = &cy_card[i].ports[line - cy_card[i].first_line]; + if (info->line < 0) + return -ENODEV; + + /* If the card's firmware hasn't been loaded, + treat it as absent from the system. This + will make the user pay attention. + */ + if (cy_is_Z(info->card)) { + struct cyclades_card *cinfo = info->card; + struct FIRM_ID __iomem *firm_id = cinfo->base_addr + ID_ADDRESS; + + if (!cyz_is_loaded(cinfo)) { + if (cinfo->hw_ver == ZE_V1 && cyz_fpga_loaded(cinfo) && + readl(&firm_id->signature) == + ZFIRM_HLT) { + printk(KERN_ERR "cyc:Cyclades-Z Error: you " + "need an external power supply for " + "this number of ports.\nFirmware " + "halted.\n"); + } else { + printk(KERN_ERR "cyc:Cyclades-Z firmware not " + "yet loaded\n"); + } + return -ENODEV; + } +#ifdef CONFIG_CYZ_INTR + else { + /* In case this Z board is operating in interrupt mode, its + interrupts should be enabled as soon as the first open + happens to one of its ports. */ + if (!cinfo->intr_enabled) { + u16 intr; + + /* Enable interrupts on the PLX chip */ + intr = readw(&cinfo->ctl_addr.p9060-> + intr_ctrl_stat) | 0x0900; + cy_writew(&cinfo->ctl_addr.p9060-> + intr_ctrl_stat, intr); + /* Enable interrupts on the FW */ + retval = cyz_issue_cmd(cinfo, 0, + C_CM_IRQ_ENBL, 0L); + if (retval != 0) { + printk(KERN_ERR "cyc:IRQ enable retval " + "was %x\n", retval); + } + cinfo->intr_enabled = 1; + } + } +#endif /* CONFIG_CYZ_INTR */ + /* Make sure this Z port really exists in hardware */ + if (info->line > (cinfo->first_line + cinfo->nports - 1)) + return -ENODEV; + } +#ifdef CY_DEBUG_OTHER + printk(KERN_DEBUG "cyc:cy_open ttyC%d\n", info->line); +#endif + tty->driver_data = info; + if (serial_paranoia_check(info, tty->name, "cy_open")) + return -ENODEV; + +#ifdef CY_DEBUG_OPEN + printk(KERN_DEBUG "cyc:cy_open ttyC%d, count = %d\n", info->line, + info->port.count); +#endif + info->port.count++; +#ifdef CY_DEBUG_COUNT + printk(KERN_DEBUG "cyc:cy_open (%d): incrementing count to %d\n", + current->pid, info->port.count); +#endif + + /* + * Start up serial port + */ + retval = cy_startup(info, tty); + if (retval) + return retval; + + retval = tty_port_block_til_ready(&info->port, tty, filp); + if (retval) { +#ifdef CY_DEBUG_OPEN + printk(KERN_DEBUG "cyc:cy_open returning after block_til_ready " + "with %d\n", retval); +#endif + return retval; + } + + info->throttle = 0; + tty_port_tty_set(&info->port, tty); + +#ifdef CY_DEBUG_OPEN + printk(KERN_DEBUG "cyc:cy_open done\n"); +#endif + return 0; +} /* cy_open */ + +/* + * cy_wait_until_sent() --- wait until the transmitter is empty + */ +static void cy_wait_until_sent(struct tty_struct *tty, int timeout) +{ + struct cyclades_card *card; + struct cyclades_port *info = tty->driver_data; + unsigned long orig_jiffies; + int char_time; + + if (serial_paranoia_check(info, tty->name, "cy_wait_until_sent")) + return; + + if (info->xmit_fifo_size == 0) + return; /* Just in case.... */ + + orig_jiffies = jiffies; + /* + * Set the check interval to be 1/5 of the estimated time to + * send a single character, and make it at least 1. The check + * interval should also be less than the timeout. + * + * Note: we have to use pretty tight timings here to satisfy + * the NIST-PCTS. + */ + char_time = (info->timeout - HZ / 50) / info->xmit_fifo_size; + char_time = char_time / 5; + if (char_time <= 0) + char_time = 1; + if (timeout < 0) + timeout = 0; + if (timeout) + char_time = min(char_time, timeout); + /* + * If the transmitter hasn't cleared in twice the approximate + * amount of time to send the entire FIFO, it probably won't + * ever clear. This assumes the UART isn't doing flow + * control, which is currently the case. Hence, if it ever + * takes longer than info->timeout, this is probably due to a + * UART bug of some kind. So, we clamp the timeout parameter at + * 2*info->timeout. + */ + if (!timeout || timeout > 2 * info->timeout) + timeout = 2 * info->timeout; + + card = info->card; + if (!cy_is_Z(card)) { + while (cyy_readb(info, CySRER) & CyTxRdy) { + if (msleep_interruptible(jiffies_to_msecs(char_time))) + break; + if (timeout && time_after(jiffies, orig_jiffies + + timeout)) + break; + } + } + /* Run one more char cycle */ + msleep_interruptible(jiffies_to_msecs(char_time * 5)); +} + +static void cy_flush_buffer(struct tty_struct *tty) +{ + struct cyclades_port *info = tty->driver_data; + struct cyclades_card *card; + int channel, retval; + unsigned long flags; + +#ifdef CY_DEBUG_IO + printk(KERN_DEBUG "cyc:cy_flush_buffer ttyC%d\n", info->line); +#endif + + if (serial_paranoia_check(info, tty->name, "cy_flush_buffer")) + return; + + card = info->card; + channel = info->line - card->first_line; + + spin_lock_irqsave(&card->card_lock, flags); + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + spin_unlock_irqrestore(&card->card_lock, flags); + + if (cy_is_Z(card)) { /* If it is a Z card, flush the on-board + buffers as well */ + spin_lock_irqsave(&card->card_lock, flags); + retval = cyz_issue_cmd(card, channel, C_CM_FLUSH_TX, 0L); + if (retval != 0) { + printk(KERN_ERR "cyc: flush_buffer retval on ttyC%d " + "was %x\n", info->line, retval); + } + spin_unlock_irqrestore(&card->card_lock, flags); + } + tty_wakeup(tty); +} /* cy_flush_buffer */ + + +static void cy_do_close(struct tty_port *port) +{ + struct cyclades_port *info = container_of(port, struct cyclades_port, + port); + struct cyclades_card *card; + unsigned long flags; + int channel; + + card = info->card; + channel = info->line - card->first_line; + spin_lock_irqsave(&card->card_lock, flags); + + if (!cy_is_Z(card)) { + /* Stop accepting input */ + cyy_writeb(info, CyCAR, channel & 0x03); + cyy_writeb(info, CySRER, cyy_readb(info, CySRER) & ~CyRxData); + if (tty_port_initialized(&info->port)) { + /* Waiting for on-board buffers to be empty before + closing the port */ + spin_unlock_irqrestore(&card->card_lock, flags); + cy_wait_until_sent(port->tty, info->timeout); + spin_lock_irqsave(&card->card_lock, flags); + } + } else { +#ifdef Z_WAKE + /* Waiting for on-board buffers to be empty before closing + the port */ + struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl; + int retval; + + if (readl(&ch_ctrl->flow_status) != C_FS_TXIDLE) { + retval = cyz_issue_cmd(card, channel, C_CM_IOCTLW, 0L); + if (retval != 0) { + printk(KERN_DEBUG "cyc:cy_close retval on " + "ttyC%d was %x\n", info->line, retval); + } + spin_unlock_irqrestore(&card->card_lock, flags); + wait_for_completion_interruptible(&info->shutdown_wait); + spin_lock_irqsave(&card->card_lock, flags); + } +#endif + } + spin_unlock_irqrestore(&card->card_lock, flags); + cy_shutdown(info, port->tty); +} + +/* + * This routine is called when a particular tty device is closed. + */ +static void cy_close(struct tty_struct *tty, struct file *filp) +{ + struct cyclades_port *info = tty->driver_data; + if (!info || serial_paranoia_check(info, tty->name, "cy_close")) + return; + tty_port_close(&info->port, tty, filp); +} /* cy_close */ + +/* This routine gets called when tty_write has put something into + * the write_queue. The characters may come from user space or + * kernel space. + * + * This routine will return the number of characters actually + * accepted for writing. + * + * If the port is not already transmitting stuff, start it off by + * enabling interrupts. The interrupt service routine will then + * ensure that the characters are sent. + * If the port is already active, there is no need to kick it. + * + */ +static int cy_write(struct tty_struct *tty, const unsigned char *buf, int count) +{ + struct cyclades_port *info = tty->driver_data; + unsigned long flags; + int c, ret = 0; + +#ifdef CY_DEBUG_IO + printk(KERN_DEBUG "cyc:cy_write ttyC%d\n", info->line); +#endif + + if (serial_paranoia_check(info, tty->name, "cy_write")) + return 0; + + if (!info->port.xmit_buf) + return 0; + + spin_lock_irqsave(&info->card->card_lock, flags); + while (1) { + c = min(count, (int)(SERIAL_XMIT_SIZE - info->xmit_cnt - 1)); + c = min(c, (int)(SERIAL_XMIT_SIZE - info->xmit_head)); + + if (c <= 0) + break; + + memcpy(info->port.xmit_buf + info->xmit_head, buf, c); + info->xmit_head = (info->xmit_head + c) & + (SERIAL_XMIT_SIZE - 1); + info->xmit_cnt += c; + buf += c; + count -= c; + ret += c; + } + spin_unlock_irqrestore(&info->card->card_lock, flags); + + info->idle_stats.xmit_bytes += ret; + info->idle_stats.xmit_idle = jiffies; + + if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) + start_xmit(info); + + return ret; +} /* cy_write */ + +/* + * This routine is called by the kernel to write a single + * character to the tty device. If the kernel uses this routine, + * it must call the flush_chars() routine (if defined) when it is + * done stuffing characters into the driver. If there is no room + * in the queue, the character is ignored. + */ +static int cy_put_char(struct tty_struct *tty, unsigned char ch) +{ + struct cyclades_port *info = tty->driver_data; + unsigned long flags; + +#ifdef CY_DEBUG_IO + printk(KERN_DEBUG "cyc:cy_put_char ttyC%d\n", info->line); +#endif + + if (serial_paranoia_check(info, tty->name, "cy_put_char")) + return 0; + + if (!info->port.xmit_buf) + return 0; + + spin_lock_irqsave(&info->card->card_lock, flags); + if (info->xmit_cnt >= (int)(SERIAL_XMIT_SIZE - 1)) { + spin_unlock_irqrestore(&info->card->card_lock, flags); + return 0; + } + + info->port.xmit_buf[info->xmit_head++] = ch; + info->xmit_head &= SERIAL_XMIT_SIZE - 1; + info->xmit_cnt++; + info->idle_stats.xmit_bytes++; + info->idle_stats.xmit_idle = jiffies; + spin_unlock_irqrestore(&info->card->card_lock, flags); + return 1; +} /* cy_put_char */ + +/* + * This routine is called by the kernel after it has written a + * series of characters to the tty device using put_char(). + */ +static void cy_flush_chars(struct tty_struct *tty) +{ + struct cyclades_port *info = tty->driver_data; + +#ifdef CY_DEBUG_IO + printk(KERN_DEBUG "cyc:cy_flush_chars ttyC%d\n", info->line); +#endif + + if (serial_paranoia_check(info, tty->name, "cy_flush_chars")) + return; + + if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || + !info->port.xmit_buf) + return; + + start_xmit(info); +} /* cy_flush_chars */ + +/* + * This routine returns the numbers of characters the tty driver + * will accept for queuing to be written. This number is subject + * to change as output buffers get emptied, or if the output flow + * control is activated. + */ +static int cy_write_room(struct tty_struct *tty) +{ + struct cyclades_port *info = tty->driver_data; + int ret; + +#ifdef CY_DEBUG_IO + printk(KERN_DEBUG "cyc:cy_write_room ttyC%d\n", info->line); +#endif + + if (serial_paranoia_check(info, tty->name, "cy_write_room")) + return 0; + ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1; + if (ret < 0) + ret = 0; + return ret; +} /* cy_write_room */ + +static int cy_chars_in_buffer(struct tty_struct *tty) +{ + struct cyclades_port *info = tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "cy_chars_in_buffer")) + return 0; + +#ifdef Z_EXT_CHARS_IN_BUFFER + if (!cy_is_Z(info->card)) { +#endif /* Z_EXT_CHARS_IN_BUFFER */ +#ifdef CY_DEBUG_IO + printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n", + info->line, info->xmit_cnt); +#endif + return info->xmit_cnt; +#ifdef Z_EXT_CHARS_IN_BUFFER + } else { + struct BUF_CTRL __iomem *buf_ctrl = info->u.cyz.buf_ctrl; + int char_count; + __u32 tx_put, tx_get, tx_bufsize; + + tx_get = readl(&buf_ctrl->tx_get); + tx_put = readl(&buf_ctrl->tx_put); + tx_bufsize = readl(&buf_ctrl->tx_bufsize); + if (tx_put >= tx_get) + char_count = tx_put - tx_get; + else + char_count = tx_put - tx_get + tx_bufsize; +#ifdef CY_DEBUG_IO + printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n", + info->line, info->xmit_cnt + char_count); +#endif + return info->xmit_cnt + char_count; + } +#endif /* Z_EXT_CHARS_IN_BUFFER */ +} /* cy_chars_in_buffer */ + +/* + * ------------------------------------------------------------ + * cy_ioctl() and friends + * ------------------------------------------------------------ + */ + +static void cyy_baud_calc(struct cyclades_port *info, __u32 baud) +{ + int co, co_val, bpr; + __u32 cy_clock = ((info->chip_rev >= CD1400_REV_J) ? 60000000 : + 25000000); + + if (baud == 0) { + info->tbpr = info->tco = info->rbpr = info->rco = 0; + return; + } + + /* determine which prescaler to use */ + for (co = 4, co_val = 2048; co; co--, co_val >>= 2) { + if (cy_clock / co_val / baud > 63) + break; + } + + bpr = (cy_clock / co_val * 2 / baud + 1) / 2; + if (bpr > 255) + bpr = 255; + + info->tbpr = info->rbpr = bpr; + info->tco = info->rco = co; +} + +/* + * This routine finds or computes the various line characteristics. + * It used to be called config_setup + */ +static void cy_set_line_char(struct cyclades_port *info, struct tty_struct *tty) +{ + struct cyclades_card *card; + unsigned long flags; + int channel; + unsigned cflag, iflag; + int baud, baud_rate = 0; + int i; + + if (info->line == -1) + return; + + cflag = tty->termios.c_cflag; + iflag = tty->termios.c_iflag; + + card = info->card; + channel = info->line - card->first_line; + + if (!cy_is_Z(card)) { + u32 cflags; + + /* baud rate */ + baud = tty_get_baud_rate(tty); + if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) == + ASYNC_SPD_CUST) { + if (info->custom_divisor) + baud_rate = info->baud / info->custom_divisor; + else + baud_rate = info->baud; + } else if (baud > CD1400_MAX_SPEED) { + baud = CD1400_MAX_SPEED; + } + /* find the baud index */ + for (i = 0; i < 20; i++) { + if (baud == baud_table[i]) + break; + } + if (i == 20) + i = 19; /* CD1400_MAX_SPEED */ + + if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) == + ASYNC_SPD_CUST) { + cyy_baud_calc(info, baud_rate); + } else { + if (info->chip_rev >= CD1400_REV_J) { + /* It is a CD1400 rev. J or later */ + info->tbpr = baud_bpr_60[i]; /* Tx BPR */ + info->tco = baud_co_60[i]; /* Tx CO */ + info->rbpr = baud_bpr_60[i]; /* Rx BPR */ + info->rco = baud_co_60[i]; /* Rx CO */ + } else { + info->tbpr = baud_bpr_25[i]; /* Tx BPR */ + info->tco = baud_co_25[i]; /* Tx CO */ + info->rbpr = baud_bpr_25[i]; /* Rx BPR */ + info->rco = baud_co_25[i]; /* Rx CO */ + } + } + if (baud_table[i] == 134) { + /* get it right for 134.5 baud */ + info->timeout = (info->xmit_fifo_size * HZ * 30 / 269) + + 2; + } else if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) == + ASYNC_SPD_CUST) { + info->timeout = (info->xmit_fifo_size * HZ * 15 / + baud_rate) + 2; + } else if (baud_table[i]) { + info->timeout = (info->xmit_fifo_size * HZ * 15 / + baud_table[i]) + 2; + /* this needs to be propagated into the card info */ + } else { + info->timeout = 0; + } + /* By tradition (is it a standard?) a baud rate of zero + implies the line should be/has been closed. A bit + later in this routine such a test is performed. */ + + /* byte size and parity */ + info->cor5 = 0; + info->cor4 = 0; + /* receive threshold */ + info->cor3 = (info->default_threshold ? + info->default_threshold : baud_cor3[i]); + info->cor2 = CyETC; + switch (cflag & CSIZE) { + case CS5: + info->cor1 = Cy_5_BITS; + break; + case CS6: + info->cor1 = Cy_6_BITS; + break; + case CS7: + info->cor1 = Cy_7_BITS; + break; + case CS8: + info->cor1 = Cy_8_BITS; + break; + } + if (cflag & CSTOPB) + info->cor1 |= Cy_2_STOP; + + if (cflag & PARENB) { + if (cflag & PARODD) + info->cor1 |= CyPARITY_O; + else + info->cor1 |= CyPARITY_E; + } else + info->cor1 |= CyPARITY_NONE; + + /* CTS flow control flag */ + tty_port_set_cts_flow(&info->port, cflag & CRTSCTS); + if (cflag & CRTSCTS) + info->cor2 |= CyCtsAE; + else + info->cor2 &= ~CyCtsAE; + tty_port_set_check_carrier(&info->port, ~cflag & CLOCAL); + + /*********************************************** + The hardware option, CyRtsAO, presents RTS when + the chip has characters to send. Since most modems + use RTS as reverse (inbound) flow control, this + option is not used. If inbound flow control is + necessary, DTR can be programmed to provide the + appropriate signals for use with a non-standard + cable. Contact Marcio Saito for details. + ***********************************************/ + + channel &= 0x03; + + spin_lock_irqsave(&card->card_lock, flags); + cyy_writeb(info, CyCAR, channel); + + /* tx and rx baud rate */ + + cyy_writeb(info, CyTCOR, info->tco); + cyy_writeb(info, CyTBPR, info->tbpr); + cyy_writeb(info, CyRCOR, info->rco); + cyy_writeb(info, CyRBPR, info->rbpr); + + /* set line characteristics according configuration */ + + cyy_writeb(info, CySCHR1, START_CHAR(tty)); + cyy_writeb(info, CySCHR2, STOP_CHAR(tty)); + cyy_writeb(info, CyCOR1, info->cor1); + cyy_writeb(info, CyCOR2, info->cor2); + cyy_writeb(info, CyCOR3, info->cor3); + cyy_writeb(info, CyCOR4, info->cor4); + cyy_writeb(info, CyCOR5, info->cor5); + + cyy_issue_cmd(info, CyCOR_CHANGE | CyCOR1ch | CyCOR2ch | + CyCOR3ch); + + /* !!! Is this needed? */ + cyy_writeb(info, CyCAR, channel); + cyy_writeb(info, CyRTPR, + (info->default_timeout ? info->default_timeout : 0x02)); + /* 10ms rx timeout */ + + cflags = CyCTS; + if (!C_CLOCAL(tty)) + cflags |= CyDSR | CyRI | CyDCD; + /* without modem intr */ + cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyMdmCh); + /* act on 1->0 modem transitions */ + if ((cflag & CRTSCTS) && info->rflow) + cyy_writeb(info, CyMCOR1, cflags | rflow_thr[i]); + else + cyy_writeb(info, CyMCOR1, cflags); + /* act on 0->1 modem transitions */ + cyy_writeb(info, CyMCOR2, cflags); + + if (i == 0) /* baud rate is zero, turn off line */ + cyy_change_rts_dtr(info, 0, TIOCM_DTR); + else + cyy_change_rts_dtr(info, TIOCM_DTR, 0); + + clear_bit(TTY_IO_ERROR, &tty->flags); + spin_unlock_irqrestore(&card->card_lock, flags); + + } else { + struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl; + __u32 sw_flow; + int retval; + + if (!cyz_is_loaded(card)) + return; + + /* baud rate */ + baud = tty_get_baud_rate(tty); + if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) == + ASYNC_SPD_CUST) { + if (info->custom_divisor) + baud_rate = info->baud / info->custom_divisor; + else + baud_rate = info->baud; + } else if (baud > CYZ_MAX_SPEED) { + baud = CYZ_MAX_SPEED; + } + cy_writel(&ch_ctrl->comm_baud, baud); + + if (baud == 134) { + /* get it right for 134.5 baud */ + info->timeout = (info->xmit_fifo_size * HZ * 30 / 269) + + 2; + } else if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) == + ASYNC_SPD_CUST) { + info->timeout = (info->xmit_fifo_size * HZ * 15 / + baud_rate) + 2; + } else if (baud) { + info->timeout = (info->xmit_fifo_size * HZ * 15 / + baud) + 2; + /* this needs to be propagated into the card info */ + } else { + info->timeout = 0; + } + + /* byte size and parity */ + switch (cflag & CSIZE) { + case CS5: + cy_writel(&ch_ctrl->comm_data_l, C_DL_CS5); + break; + case CS6: + cy_writel(&ch_ctrl->comm_data_l, C_DL_CS6); + break; + case CS7: + cy_writel(&ch_ctrl->comm_data_l, C_DL_CS7); + break; + case CS8: + cy_writel(&ch_ctrl->comm_data_l, C_DL_CS8); + break; + } + if (cflag & CSTOPB) { + cy_writel(&ch_ctrl->comm_data_l, + readl(&ch_ctrl->comm_data_l) | C_DL_2STOP); + } else { + cy_writel(&ch_ctrl->comm_data_l, + readl(&ch_ctrl->comm_data_l) | C_DL_1STOP); + } + if (cflag & PARENB) { + if (cflag & PARODD) + cy_writel(&ch_ctrl->comm_parity, C_PR_ODD); + else + cy_writel(&ch_ctrl->comm_parity, C_PR_EVEN); + } else + cy_writel(&ch_ctrl->comm_parity, C_PR_NONE); + + /* CTS flow control flag */ + if (cflag & CRTSCTS) { + cy_writel(&ch_ctrl->hw_flow, + readl(&ch_ctrl->hw_flow) | C_RS_CTS | C_RS_RTS); + } else { + cy_writel(&ch_ctrl->hw_flow, readl(&ch_ctrl->hw_flow) & + ~(C_RS_CTS | C_RS_RTS)); + } + /* As the HW flow control is done in firmware, the driver + doesn't need to care about it */ + tty_port_set_cts_flow(&info->port, 0); + + /* XON/XOFF/XANY flow control flags */ + sw_flow = 0; + if (iflag & IXON) { + sw_flow |= C_FL_OXX; + if (iflag & IXANY) + sw_flow |= C_FL_OIXANY; + } + cy_writel(&ch_ctrl->sw_flow, sw_flow); + + retval = cyz_issue_cmd(card, channel, C_CM_IOCTL, 0L); + if (retval != 0) { + printk(KERN_ERR "cyc:set_line_char retval on ttyC%d " + "was %x\n", info->line, retval); + } + + /* CD sensitivity */ + tty_port_set_check_carrier(&info->port, ~cflag & CLOCAL); + + if (baud == 0) { /* baud rate is zero, turn off line */ + cy_writel(&ch_ctrl->rs_control, + readl(&ch_ctrl->rs_control) & ~C_RS_DTR); +#ifdef CY_DEBUG_DTR + printk(KERN_DEBUG "cyc:set_line_char dropping Z DTR\n"); +#endif + } else { + cy_writel(&ch_ctrl->rs_control, + readl(&ch_ctrl->rs_control) | C_RS_DTR); +#ifdef CY_DEBUG_DTR + printk(KERN_DEBUG "cyc:set_line_char raising Z DTR\n"); +#endif + } + + retval = cyz_issue_cmd(card, channel, C_CM_IOCTLM, 0L); + if (retval != 0) { + printk(KERN_ERR "cyc:set_line_char(2) retval on ttyC%d " + "was %x\n", info->line, retval); + } + + clear_bit(TTY_IO_ERROR, &tty->flags); + } +} /* set_line_char */ + +static int cy_get_serial_info(struct tty_struct *tty, + struct serial_struct *ss) +{ + struct cyclades_port *info = tty->driver_data; + struct cyclades_card *cinfo = info->card; + + if (serial_paranoia_check(info, tty->name, "cy_ioctl")) + return -ENODEV; + ss->type = info->type; + ss->line = info->line; + ss->port = (info->card - cy_card) * 0x100 + info->line - + cinfo->first_line; + ss->irq = cinfo->irq; + ss->flags = info->port.flags; + ss->close_delay = info->port.close_delay; + ss->closing_wait = info->port.closing_wait; + ss->baud_base = info->baud; + ss->custom_divisor = info->custom_divisor; + return 0; +} + +static int cy_set_serial_info(struct tty_struct *tty, + struct serial_struct *ss) +{ + struct cyclades_port *info = tty->driver_data; + int old_flags; + int ret; + + if (serial_paranoia_check(info, tty->name, "cy_ioctl")) + return -ENODEV; + + mutex_lock(&info->port.mutex); + + old_flags = info->port.flags; + + if (!capable(CAP_SYS_ADMIN)) { + if (ss->close_delay != info->port.close_delay || + ss->baud_base != info->baud || + (ss->flags & ASYNC_FLAGS & + ~ASYNC_USR_MASK) != + (info->port.flags & ASYNC_FLAGS & ~ASYNC_USR_MASK)) + { + mutex_unlock(&info->port.mutex); + return -EPERM; + } + info->port.flags = (info->port.flags & ~ASYNC_USR_MASK) | + (ss->flags & ASYNC_USR_MASK); + info->baud = ss->baud_base; + info->custom_divisor = ss->custom_divisor; + goto check_and_exit; + } + + /* + * OK, past this point, all the error checking has been done. + * At this point, we start making changes..... + */ + + info->baud = ss->baud_base; + info->custom_divisor = ss->custom_divisor; + info->port.flags = (info->port.flags & ~ASYNC_FLAGS) | + (ss->flags & ASYNC_FLAGS); + info->port.close_delay = ss->close_delay * HZ / 100; + info->port.closing_wait = ss->closing_wait * HZ / 100; + +check_and_exit: + if (tty_port_initialized(&info->port)) { + if ((ss->flags ^ old_flags) & ASYNC_SPD_MASK) { + /* warn about deprecation unless clearing */ + if (ss->flags & ASYNC_SPD_MASK) + dev_warn_ratelimited(tty->dev, "use of SPD flags is deprecated\n"); + } + cy_set_line_char(info, tty); + ret = 0; + } else { + ret = cy_startup(info, tty); + } + mutex_unlock(&info->port.mutex); + return ret; +} /* set_serial_info */ + +/* + * get_lsr_info - get line status register info + * + * Purpose: Let user call ioctl() to get info when the UART physically + * is emptied. On bus types like RS485, the transmitter must + * release the bus after transmitting. This must be done when + * the transmit shift register is empty, not be done when the + * transmit holding register is empty. This functionality + * allows an RS485 driver to be written in user space. + */ +static int get_lsr_info(struct cyclades_port *info, unsigned int __user *value) +{ + struct cyclades_card *card = info->card; + unsigned int result; + unsigned long flags; + u8 status; + + if (!cy_is_Z(card)) { + spin_lock_irqsave(&card->card_lock, flags); + status = cyy_readb(info, CySRER) & (CyTxRdy | CyTxMpty); + spin_unlock_irqrestore(&card->card_lock, flags); + result = (status ? 0 : TIOCSER_TEMT); + } else { + /* Not supported yet */ + return -EINVAL; + } + return put_user(result, value); +} + +static int cy_tiocmget(struct tty_struct *tty) +{ + struct cyclades_port *info = tty->driver_data; + struct cyclades_card *card; + int result; + + if (serial_paranoia_check(info, tty->name, __func__)) + return -ENODEV; + + card = info->card; + + if (!cy_is_Z(card)) { + unsigned long flags; + int channel = info->line - card->first_line; + u8 status; + + spin_lock_irqsave(&card->card_lock, flags); + cyy_writeb(info, CyCAR, channel & 0x03); + status = cyy_readb(info, CyMSVR1); + status |= cyy_readb(info, CyMSVR2); + spin_unlock_irqrestore(&card->card_lock, flags); + + if (info->rtsdtr_inv) { + result = ((status & CyRTS) ? TIOCM_DTR : 0) | + ((status & CyDTR) ? TIOCM_RTS : 0); + } else { + result = ((status & CyRTS) ? TIOCM_RTS : 0) | + ((status & CyDTR) ? TIOCM_DTR : 0); + } + result |= ((status & CyDCD) ? TIOCM_CAR : 0) | + ((status & CyRI) ? TIOCM_RNG : 0) | + ((status & CyDSR) ? TIOCM_DSR : 0) | + ((status & CyCTS) ? TIOCM_CTS : 0); + } else { + u32 lstatus; + + if (!cyz_is_loaded(card)) { + result = -ENODEV; + goto end; + } + + lstatus = readl(&info->u.cyz.ch_ctrl->rs_status); + result = ((lstatus & C_RS_RTS) ? TIOCM_RTS : 0) | + ((lstatus & C_RS_DTR) ? TIOCM_DTR : 0) | + ((lstatus & C_RS_DCD) ? TIOCM_CAR : 0) | + ((lstatus & C_RS_RI) ? TIOCM_RNG : 0) | + ((lstatus & C_RS_DSR) ? TIOCM_DSR : 0) | + ((lstatus & C_RS_CTS) ? TIOCM_CTS : 0); + } +end: + return result; +} /* cy_tiomget */ + +static int +cy_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct cyclades_port *info = tty->driver_data; + struct cyclades_card *card; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, __func__)) + return -ENODEV; + + card = info->card; + if (!cy_is_Z(card)) { + spin_lock_irqsave(&card->card_lock, flags); + cyy_change_rts_dtr(info, set, clear); + spin_unlock_irqrestore(&card->card_lock, flags); + } else { + struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl; + int retval, channel = info->line - card->first_line; + u32 rs; + + if (!cyz_is_loaded(card)) + return -ENODEV; + + spin_lock_irqsave(&card->card_lock, flags); + rs = readl(&ch_ctrl->rs_control); + if (set & TIOCM_RTS) + rs |= C_RS_RTS; + if (clear & TIOCM_RTS) + rs &= ~C_RS_RTS; + if (set & TIOCM_DTR) { + rs |= C_RS_DTR; +#ifdef CY_DEBUG_DTR + printk(KERN_DEBUG "cyc:set_modem_info raising Z DTR\n"); +#endif + } + if (clear & TIOCM_DTR) { + rs &= ~C_RS_DTR; +#ifdef CY_DEBUG_DTR + printk(KERN_DEBUG "cyc:set_modem_info clearing " + "Z DTR\n"); +#endif + } + cy_writel(&ch_ctrl->rs_control, rs); + retval = cyz_issue_cmd(card, channel, C_CM_IOCTLM, 0L); + spin_unlock_irqrestore(&card->card_lock, flags); + if (retval != 0) { + printk(KERN_ERR "cyc:set_modem_info retval on ttyC%d " + "was %x\n", info->line, retval); + } + } + return 0; +} + +/* + * cy_break() --- routine which turns the break handling on or off + */ +static int cy_break(struct tty_struct *tty, int break_state) +{ + struct cyclades_port *info = tty->driver_data; + struct cyclades_card *card; + unsigned long flags; + int retval = 0; + + if (serial_paranoia_check(info, tty->name, "cy_break")) + return -EINVAL; + + card = info->card; + + spin_lock_irqsave(&card->card_lock, flags); + if (!cy_is_Z(card)) { + /* Let the transmit ISR take care of this (since it + requires stuffing characters into the output stream). + */ + if (break_state == -1) { + if (!info->breakon) { + info->breakon = 1; + if (!info->xmit_cnt) { + spin_unlock_irqrestore(&card->card_lock, flags); + start_xmit(info); + spin_lock_irqsave(&card->card_lock, flags); + } + } + } else { + if (!info->breakoff) { + info->breakoff = 1; + if (!info->xmit_cnt) { + spin_unlock_irqrestore(&card->card_lock, flags); + start_xmit(info); + spin_lock_irqsave(&card->card_lock, flags); + } + } + } + } else { + if (break_state == -1) { + retval = cyz_issue_cmd(card, + info->line - card->first_line, + C_CM_SET_BREAK, 0L); + if (retval != 0) { + printk(KERN_ERR "cyc:cy_break (set) retval on " + "ttyC%d was %x\n", info->line, retval); + } + } else { + retval = cyz_issue_cmd(card, + info->line - card->first_line, + C_CM_CLR_BREAK, 0L); + if (retval != 0) { + printk(KERN_DEBUG "cyc:cy_break (clr) retval " + "on ttyC%d was %x\n", info->line, + retval); + } + } + } + spin_unlock_irqrestore(&card->card_lock, flags); + return retval; +} /* cy_break */ + +static int set_threshold(struct cyclades_port *info, unsigned long value) +{ + struct cyclades_card *card = info->card; + unsigned long flags; + + if (!cy_is_Z(card)) { + info->cor3 &= ~CyREC_FIFO; + info->cor3 |= value & CyREC_FIFO; + + spin_lock_irqsave(&card->card_lock, flags); + cyy_writeb(info, CyCOR3, info->cor3); + cyy_issue_cmd(info, CyCOR_CHANGE | CyCOR3ch); + spin_unlock_irqrestore(&card->card_lock, flags); + } + return 0; +} /* set_threshold */ + +static int get_threshold(struct cyclades_port *info, + unsigned long __user *value) +{ + struct cyclades_card *card = info->card; + + if (!cy_is_Z(card)) { + u8 tmp = cyy_readb(info, CyCOR3) & CyREC_FIFO; + return put_user(tmp, value); + } + return 0; +} /* get_threshold */ + +static int set_timeout(struct cyclades_port *info, unsigned long value) +{ + struct cyclades_card *card = info->card; + unsigned long flags; + + if (!cy_is_Z(card)) { + spin_lock_irqsave(&card->card_lock, flags); + cyy_writeb(info, CyRTPR, value & 0xff); + spin_unlock_irqrestore(&card->card_lock, flags); + } + return 0; +} /* set_timeout */ + +static int get_timeout(struct cyclades_port *info, + unsigned long __user *value) +{ + struct cyclades_card *card = info->card; + + if (!cy_is_Z(card)) { + u8 tmp = cyy_readb(info, CyRTPR); + return put_user(tmp, value); + } + return 0; +} /* get_timeout */ + +static int cy_cflags_changed(struct cyclades_port *info, unsigned long arg, + struct cyclades_icount *cprev) +{ + struct cyclades_icount cnow; + unsigned long flags; + int ret; + + spin_lock_irqsave(&info->card->card_lock, flags); + cnow = info->icount; /* atomic copy */ + spin_unlock_irqrestore(&info->card->card_lock, flags); + + ret = ((arg & TIOCM_RNG) && (cnow.rng != cprev->rng)) || + ((arg & TIOCM_DSR) && (cnow.dsr != cprev->dsr)) || + ((arg & TIOCM_CD) && (cnow.dcd != cprev->dcd)) || + ((arg & TIOCM_CTS) && (cnow.cts != cprev->cts)); + + *cprev = cnow; + + return ret; +} + +/* + * This routine allows the tty driver to implement device- + * specific ioctl's. If the ioctl number passed in cmd is + * not recognized by the driver, it should return ENOIOCTLCMD. + */ +static int +cy_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct cyclades_port *info = tty->driver_data; + struct cyclades_icount cnow; /* kernel counter temps */ + int ret_val = 0; + unsigned long flags; + void __user *argp = (void __user *)arg; + + if (serial_paranoia_check(info, tty->name, "cy_ioctl")) + return -ENODEV; + +#ifdef CY_DEBUG_OTHER + printk(KERN_DEBUG "cyc:cy_ioctl ttyC%d, cmd = %x arg = %lx\n", + info->line, cmd, arg); +#endif + + switch (cmd) { + case CYGETMON: + if (copy_to_user(argp, &info->mon, sizeof(info->mon))) { + ret_val = -EFAULT; + break; + } + memset(&info->mon, 0, sizeof(info->mon)); + break; + case CYGETTHRESH: + ret_val = get_threshold(info, argp); + break; + case CYSETTHRESH: + ret_val = set_threshold(info, arg); + break; + case CYGETDEFTHRESH: + ret_val = put_user(info->default_threshold, + (unsigned long __user *)argp); + break; + case CYSETDEFTHRESH: + info->default_threshold = arg & 0x0f; + break; + case CYGETTIMEOUT: + ret_val = get_timeout(info, argp); + break; + case CYSETTIMEOUT: + ret_val = set_timeout(info, arg); + break; + case CYGETDEFTIMEOUT: + ret_val = put_user(info->default_timeout, + (unsigned long __user *)argp); + break; + case CYSETDEFTIMEOUT: + info->default_timeout = arg & 0xff; + break; + case CYSETRFLOW: + info->rflow = (int)arg; + break; + case CYGETRFLOW: + ret_val = info->rflow; + break; + case CYSETRTSDTR_INV: + info->rtsdtr_inv = (int)arg; + break; + case CYGETRTSDTR_INV: + ret_val = info->rtsdtr_inv; + break; + case CYGETCD1400VER: + ret_val = info->chip_rev; + break; +#ifndef CONFIG_CYZ_INTR + case CYZSETPOLLCYCLE: + if (arg > LONG_MAX / HZ) + return -ENODEV; + cyz_polling_cycle = (arg * HZ) / 1000; + break; + case CYZGETPOLLCYCLE: + ret_val = (cyz_polling_cycle * 1000) / HZ; + break; +#endif /* CONFIG_CYZ_INTR */ + case CYSETWAIT: + info->port.closing_wait = (unsigned short)arg * HZ / 100; + break; + case CYGETWAIT: + ret_val = info->port.closing_wait / (HZ / 100); + break; + case TIOCSERGETLSR: /* Get line status register */ + ret_val = get_lsr_info(info, argp); + break; + /* + * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change + * - mask passed in arg for lines of interest + * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) + * Caller should use TIOCGICOUNT to see which one it was + */ + case TIOCMIWAIT: + spin_lock_irqsave(&info->card->card_lock, flags); + /* note the counters on entry */ + cnow = info->icount; + spin_unlock_irqrestore(&info->card->card_lock, flags); + ret_val = wait_event_interruptible(info->port.delta_msr_wait, + cy_cflags_changed(info, arg, &cnow)); + break; + + /* + * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) + * Return: write counters to the user passed counter struct + * NB: both 1->0 and 0->1 transitions are counted except for + * RI where only 0->1 is counted. + */ + default: + ret_val = -ENOIOCTLCMD; + } + +#ifdef CY_DEBUG_OTHER + printk(KERN_DEBUG "cyc:cy_ioctl done\n"); +#endif + return ret_val; +} /* cy_ioctl */ + +static int cy_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *sic) +{ + struct cyclades_port *info = tty->driver_data; + struct cyclades_icount cnow; /* Used to snapshot */ + unsigned long flags; + + spin_lock_irqsave(&info->card->card_lock, flags); + cnow = info->icount; + spin_unlock_irqrestore(&info->card->card_lock, flags); + + sic->cts = cnow.cts; + sic->dsr = cnow.dsr; + sic->rng = cnow.rng; + sic->dcd = cnow.dcd; + sic->rx = cnow.rx; + sic->tx = cnow.tx; + sic->frame = cnow.frame; + sic->overrun = cnow.overrun; + sic->parity = cnow.parity; + sic->brk = cnow.brk; + sic->buf_overrun = cnow.buf_overrun; + return 0; +} + +/* + * This routine allows the tty driver to be notified when + * device's termios settings have changed. Note that a + * well-designed tty driver should be prepared to accept the case + * where old == NULL, and try to do something rational. + */ +static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios) +{ + struct cyclades_port *info = tty->driver_data; + +#ifdef CY_DEBUG_OTHER + printk(KERN_DEBUG "cyc:cy_set_termios ttyC%d\n", info->line); +#endif + + cy_set_line_char(info, tty); + + if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty)) { + tty->hw_stopped = 0; + cy_start(tty); + } +#if 0 + /* + * No need to wake up processes in open wait, since they + * sample the CLOCAL flag once, and don't recheck it. + * XXX It's not clear whether the current behavior is correct + * or not. Hence, this may change..... + */ + if (!(old_termios->c_cflag & CLOCAL) && C_CLOCAL(tty)) + wake_up_interruptible(&info->port.open_wait); +#endif +} /* cy_set_termios */ + +/* This function is used to send a high-priority XON/XOFF character to + the device. +*/ +static void cy_send_xchar(struct tty_struct *tty, char ch) +{ + struct cyclades_port *info = tty->driver_data; + struct cyclades_card *card; + int channel; + + if (serial_paranoia_check(info, tty->name, "cy_send_xchar")) + return; + + info->x_char = ch; + + if (ch) + cy_start(tty); + + card = info->card; + channel = info->line - card->first_line; + + if (cy_is_Z(card)) { + if (ch == STOP_CHAR(tty)) + cyz_issue_cmd(card, channel, C_CM_SENDXOFF, 0L); + else if (ch == START_CHAR(tty)) + cyz_issue_cmd(card, channel, C_CM_SENDXON, 0L); + } +} + +/* This routine is called by the upper-layer tty layer to signal + that incoming characters should be throttled because the input + buffers are close to full. + */ +static void cy_throttle(struct tty_struct *tty) +{ + struct cyclades_port *info = tty->driver_data; + struct cyclades_card *card; + unsigned long flags; + +#ifdef CY_DEBUG_THROTTLE + printk(KERN_DEBUG "cyc:throttle %s ...ttyC%d\n", tty_name(tty), + info->line); +#endif + + if (serial_paranoia_check(info, tty->name, "cy_throttle")) + return; + + card = info->card; + + if (I_IXOFF(tty)) { + if (!cy_is_Z(card)) + cy_send_xchar(tty, STOP_CHAR(tty)); + else + info->throttle = 1; + } + + if (C_CRTSCTS(tty)) { + if (!cy_is_Z(card)) { + spin_lock_irqsave(&card->card_lock, flags); + cyy_change_rts_dtr(info, 0, TIOCM_RTS); + spin_unlock_irqrestore(&card->card_lock, flags); + } else { + info->throttle = 1; + } + } +} /* cy_throttle */ + +/* + * This routine notifies the tty driver that it should signal + * that characters can now be sent to the tty without fear of + * overrunning the input buffers of the line disciplines. + */ +static void cy_unthrottle(struct tty_struct *tty) +{ + struct cyclades_port *info = tty->driver_data; + struct cyclades_card *card; + unsigned long flags; + +#ifdef CY_DEBUG_THROTTLE + printk(KERN_DEBUG "cyc:unthrottle %s ...ttyC%d\n", + tty_name(tty), info->line); +#endif + + if (serial_paranoia_check(info, tty->name, "cy_unthrottle")) + return; + + if (I_IXOFF(tty)) { + if (info->x_char) + info->x_char = 0; + else + cy_send_xchar(tty, START_CHAR(tty)); + } + + if (C_CRTSCTS(tty)) { + card = info->card; + if (!cy_is_Z(card)) { + spin_lock_irqsave(&card->card_lock, flags); + cyy_change_rts_dtr(info, TIOCM_RTS, 0); + spin_unlock_irqrestore(&card->card_lock, flags); + } else { + info->throttle = 0; + } + } +} /* cy_unthrottle */ + +/* cy_start and cy_stop provide software output flow control as a + function of XON/XOFF, software CTS, and other such stuff. +*/ +static void cy_stop(struct tty_struct *tty) +{ + struct cyclades_card *cinfo; + struct cyclades_port *info = tty->driver_data; + int channel; + unsigned long flags; + +#ifdef CY_DEBUG_OTHER + printk(KERN_DEBUG "cyc:cy_stop ttyC%d\n", info->line); +#endif + + if (serial_paranoia_check(info, tty->name, "cy_stop")) + return; + + cinfo = info->card; + channel = info->line - cinfo->first_line; + if (!cy_is_Z(cinfo)) { + spin_lock_irqsave(&cinfo->card_lock, flags); + cyy_writeb(info, CyCAR, channel & 0x03); + cyy_writeb(info, CySRER, cyy_readb(info, CySRER) & ~CyTxRdy); + spin_unlock_irqrestore(&cinfo->card_lock, flags); + } +} /* cy_stop */ + +static void cy_start(struct tty_struct *tty) +{ + struct cyclades_card *cinfo; + struct cyclades_port *info = tty->driver_data; + int channel; + unsigned long flags; + +#ifdef CY_DEBUG_OTHER + printk(KERN_DEBUG "cyc:cy_start ttyC%d\n", info->line); +#endif + + if (serial_paranoia_check(info, tty->name, "cy_start")) + return; + + cinfo = info->card; + channel = info->line - cinfo->first_line; + if (!cy_is_Z(cinfo)) { + spin_lock_irqsave(&cinfo->card_lock, flags); + cyy_writeb(info, CyCAR, channel & 0x03); + cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyTxRdy); + spin_unlock_irqrestore(&cinfo->card_lock, flags); + } +} /* cy_start */ + +/* + * cy_hangup() --- called by tty_hangup() when a hangup is signaled. + */ +static void cy_hangup(struct tty_struct *tty) +{ + struct cyclades_port *info = tty->driver_data; + +#ifdef CY_DEBUG_OTHER + printk(KERN_DEBUG "cyc:cy_hangup ttyC%d\n", info->line); +#endif + + if (serial_paranoia_check(info, tty->name, "cy_hangup")) + return; + + cy_flush_buffer(tty); + cy_shutdown(info, tty); + tty_port_hangup(&info->port); +} /* cy_hangup */ + +static int cyy_carrier_raised(struct tty_port *port) +{ + struct cyclades_port *info = container_of(port, struct cyclades_port, + port); + struct cyclades_card *cinfo = info->card; + unsigned long flags; + int channel = info->line - cinfo->first_line; + u32 cd; + + spin_lock_irqsave(&cinfo->card_lock, flags); + cyy_writeb(info, CyCAR, channel & 0x03); + cd = cyy_readb(info, CyMSVR1) & CyDCD; + spin_unlock_irqrestore(&cinfo->card_lock, flags); + + return cd; +} + +static void cyy_dtr_rts(struct tty_port *port, int raise) +{ + struct cyclades_port *info = container_of(port, struct cyclades_port, + port); + struct cyclades_card *cinfo = info->card; + unsigned long flags; + + spin_lock_irqsave(&cinfo->card_lock, flags); + cyy_change_rts_dtr(info, raise ? TIOCM_RTS | TIOCM_DTR : 0, + raise ? 0 : TIOCM_RTS | TIOCM_DTR); + spin_unlock_irqrestore(&cinfo->card_lock, flags); +} + +static int cyz_carrier_raised(struct tty_port *port) +{ + struct cyclades_port *info = container_of(port, struct cyclades_port, + port); + + return readl(&info->u.cyz.ch_ctrl->rs_status) & C_RS_DCD; +} + +static void cyz_dtr_rts(struct tty_port *port, int raise) +{ + struct cyclades_port *info = container_of(port, struct cyclades_port, + port); + struct cyclades_card *cinfo = info->card; + struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl; + int ret, channel = info->line - cinfo->first_line; + u32 rs; + + rs = readl(&ch_ctrl->rs_control); + if (raise) + rs |= C_RS_RTS | C_RS_DTR; + else + rs &= ~(C_RS_RTS | C_RS_DTR); + cy_writel(&ch_ctrl->rs_control, rs); + ret = cyz_issue_cmd(cinfo, channel, C_CM_IOCTLM, 0L); + if (ret != 0) + printk(KERN_ERR "%s: retval on ttyC%d was %x\n", + __func__, info->line, ret); +#ifdef CY_DEBUG_DTR + printk(KERN_DEBUG "%s: raising Z DTR\n", __func__); +#endif +} + +static const struct tty_port_operations cyy_port_ops = { + .carrier_raised = cyy_carrier_raised, + .dtr_rts = cyy_dtr_rts, + .shutdown = cy_do_close, +}; + +static const struct tty_port_operations cyz_port_ops = { + .carrier_raised = cyz_carrier_raised, + .dtr_rts = cyz_dtr_rts, + .shutdown = cy_do_close, +}; + +/* + * --------------------------------------------------------------------- + * cy_init() and friends + * + * cy_init() is called at boot-time to initialize the serial driver. + * --------------------------------------------------------------------- + */ + +static int cy_init_card(struct cyclades_card *cinfo) +{ + struct cyclades_port *info; + unsigned int channel, port; + + spin_lock_init(&cinfo->card_lock); + cinfo->intr_enabled = 0; + + cinfo->ports = kcalloc(cinfo->nports, sizeof(*cinfo->ports), + GFP_KERNEL); + if (cinfo->ports == NULL) { + printk(KERN_ERR "Cyclades: cannot allocate ports\n"); + return -ENOMEM; + } + + for (channel = 0, port = cinfo->first_line; channel < cinfo->nports; + channel++, port++) { + info = &cinfo->ports[channel]; + tty_port_init(&info->port); + info->magic = CYCLADES_MAGIC; + info->card = cinfo; + info->line = port; + + info->port.closing_wait = CLOSING_WAIT_DELAY; + info->port.close_delay = 5 * HZ / 10; + init_completion(&info->shutdown_wait); + + if (cy_is_Z(cinfo)) { + struct FIRM_ID *firm_id = cinfo->base_addr + ID_ADDRESS; + struct ZFW_CTRL *zfw_ctrl; + + info->port.ops = &cyz_port_ops; + info->type = PORT_STARTECH; + + zfw_ctrl = cinfo->base_addr + + (readl(&firm_id->zfwctrl_addr) & 0xfffff); + info->u.cyz.ch_ctrl = &zfw_ctrl->ch_ctrl[channel]; + info->u.cyz.buf_ctrl = &zfw_ctrl->buf_ctrl[channel]; + + if (cinfo->hw_ver == ZO_V1) + info->xmit_fifo_size = CYZ_FIFO_SIZE; + else + info->xmit_fifo_size = 4 * CYZ_FIFO_SIZE; +#ifdef CONFIG_CYZ_INTR + timer_setup(&info->rx_full_timer, cyz_rx_restart, 0); +#endif + } else { + unsigned short chip_number; + int index = cinfo->bus_index; + + info->port.ops = &cyy_port_ops; + info->type = PORT_CIRRUS; + info->xmit_fifo_size = CyMAX_CHAR_FIFO; + info->cor1 = CyPARITY_NONE | Cy_1_STOP | Cy_8_BITS; + info->cor2 = CyETC; + info->cor3 = 0x08; /* _very_ small rcv threshold */ + + chip_number = channel / CyPORTS_PER_CHIP; + info->u.cyy.base_addr = cinfo->base_addr + + (cy_chip_offset[chip_number] << index); + info->chip_rev = cyy_readb(info, CyGFRCR); + + if (info->chip_rev >= CD1400_REV_J) { + /* It is a CD1400 rev. J or later */ + info->tbpr = baud_bpr_60[13]; /* Tx BPR */ + info->tco = baud_co_60[13]; /* Tx CO */ + info->rbpr = baud_bpr_60[13]; /* Rx BPR */ + info->rco = baud_co_60[13]; /* Rx CO */ + info->rtsdtr_inv = 1; + } else { + info->tbpr = baud_bpr_25[13]; /* Tx BPR */ + info->tco = baud_co_25[13]; /* Tx CO */ + info->rbpr = baud_bpr_25[13]; /* Rx BPR */ + info->rco = baud_co_25[13]; /* Rx CO */ + info->rtsdtr_inv = 0; + } + info->read_status_mask = CyTIMEOUT | CySPECHAR | + CyBREAK | CyPARITY | CyFRAME | CyOVERRUN; + } + + } + +#ifndef CONFIG_CYZ_INTR + if (cy_is_Z(cinfo) && !timer_pending(&cyz_timerlist)) { + mod_timer(&cyz_timerlist, jiffies + 1); +#ifdef CY_PCI_DEBUG + printk(KERN_DEBUG "Cyclades-Z polling initialized\n"); +#endif + } +#endif + return 0; +} + +/* initialize chips on Cyclom-Y card -- return number of valid + chips (which is number of ports/4) */ +static unsigned short cyy_init_card(void __iomem *true_base_addr, + int index) +{ + unsigned int chip_number; + void __iomem *base_addr; + + cy_writeb(true_base_addr + (Cy_HwReset << index), 0); + /* Cy_HwReset is 0x1400 */ + cy_writeb(true_base_addr + (Cy_ClrIntr << index), 0); + /* Cy_ClrIntr is 0x1800 */ + udelay(500L); + + for (chip_number = 0; chip_number < CyMAX_CHIPS_PER_CARD; + chip_number++) { + base_addr = + true_base_addr + (cy_chip_offset[chip_number] << index); + mdelay(1); + if (readb(base_addr + (CyCCR << index)) != 0x00) { + /************* + printk(" chip #%d at %#6lx is never idle (CCR != 0)\n", + chip_number, (unsigned long)base_addr); + *************/ + return chip_number; + } + + cy_writeb(base_addr + (CyGFRCR << index), 0); + udelay(10L); + + /* The Cyclom-16Y does not decode address bit 9 and therefore + cannot distinguish between references to chip 0 and a non- + existent chip 4. If the preceding clearing of the supposed + chip 4 GFRCR register appears at chip 0, there is no chip 4 + and this must be a Cyclom-16Y, not a Cyclom-32Ye. + */ + if (chip_number == 4 && readb(true_base_addr + + (cy_chip_offset[0] << index) + + (CyGFRCR << index)) == 0) { + return chip_number; + } + + cy_writeb(base_addr + (CyCCR << index), CyCHIP_RESET); + mdelay(1); + + if (readb(base_addr + (CyGFRCR << index)) == 0x00) { + /* + printk(" chip #%d at %#6lx is not responding ", + chip_number, (unsigned long)base_addr); + printk("(GFRCR stayed 0)\n", + */ + return chip_number; + } + if ((0xf0 & (readb(base_addr + (CyGFRCR << index)))) != + 0x40) { + /* + printk(" chip #%d at %#6lx is not valid (GFRCR == " + "%#2x)\n", + chip_number, (unsigned long)base_addr, + base_addr[CyGFRCR<= CD1400_REV_J) { + /* It is a CD1400 rev. J or later */ + /* Impossible to reach 5ms with this chip. + Changed to 2ms instead (f = 500 Hz). */ + cy_writeb(base_addr + (CyPPR << index), CyCLOCK_60_2MS); + } else { + /* f = 200 Hz */ + cy_writeb(base_addr + (CyPPR << index), CyCLOCK_25_5MS); + } + + /* + printk(" chip #%d at %#6lx is rev 0x%2x\n", + chip_number, (unsigned long)base_addr, + readb(base_addr+(CyGFRCR< NR_PORTS) { + printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but no " + "more channels are available. Change NR_PORTS " + "in cyclades.c and recompile kernel.\n", + (unsigned long)cy_isa_address); + iounmap(cy_isa_address); + return nboard; + } + /* fill the next cy_card structure available */ + for (j = 0; j < NR_CARDS; j++) { + card = &cy_card[j]; + if (card->base_addr == NULL) + break; + } + if (j == NR_CARDS) { /* no more cy_cards available */ + printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but no " + "more cards can be used. Change NR_CARDS in " + "cyclades.c and recompile kernel.\n", + (unsigned long)cy_isa_address); + iounmap(cy_isa_address); + return nboard; + } + + /* allocate IRQ */ + if (request_irq(cy_isa_irq, cyy_interrupt, + 0, "Cyclom-Y", card)) { + printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but " + "could not allocate IRQ#%d.\n", + (unsigned long)cy_isa_address, cy_isa_irq); + iounmap(cy_isa_address); + return nboard; + } + + /* set cy_card */ + card->base_addr = cy_isa_address; + card->ctl_addr.p9050 = NULL; + card->irq = (int)cy_isa_irq; + card->bus_index = 0; + card->first_line = cy_next_channel; + card->num_chips = cy_isa_nchan / CyPORTS_PER_CHIP; + card->nports = cy_isa_nchan; + if (cy_init_card(card)) { + card->base_addr = NULL; + free_irq(cy_isa_irq, card); + iounmap(cy_isa_address); + continue; + } + nboard++; + + printk(KERN_INFO "Cyclom-Y/ISA #%d: 0x%lx-0x%lx, IRQ%d found: " + "%d channels starting from port %d\n", + j + 1, (unsigned long)cy_isa_address, + (unsigned long)(cy_isa_address + (CyISA_Ywin - 1)), + cy_isa_irq, cy_isa_nchan, cy_next_channel); + + for (k = 0, j = cy_next_channel; + j < cy_next_channel + cy_isa_nchan; j++, k++) + tty_port_register_device(&card->ports[k].port, + cy_serial_driver, j, NULL); + cy_next_channel += cy_isa_nchan; + } + return nboard; +#else + return 0; +#endif /* CONFIG_ISA */ +} /* cy_detect_isa */ + +#ifdef CONFIG_PCI +static inline int cyc_isfwstr(const char *str, unsigned int size) +{ + unsigned int a; + + for (a = 0; a < size && *str; a++, str++) + if (*str & 0x80) + return -EINVAL; + + for (; a < size; a++, str++) + if (*str) + return -EINVAL; + + return 0; +} + +static inline void cyz_fpga_copy(void __iomem *fpga, const u8 *data, + unsigned int size) +{ + for (; size > 0; size--) { + cy_writel(fpga, *data++); + udelay(10); + } +} + +static void plx_init(struct pci_dev *pdev, int irq, + struct RUNTIME_9060 __iomem *addr) +{ + /* Reset PLX */ + cy_writel(&addr->init_ctrl, readl(&addr->init_ctrl) | 0x40000000); + udelay(100L); + cy_writel(&addr->init_ctrl, readl(&addr->init_ctrl) & ~0x40000000); + + /* Reload Config. Registers from EEPROM */ + cy_writel(&addr->init_ctrl, readl(&addr->init_ctrl) | 0x20000000); + udelay(100L); + cy_writel(&addr->init_ctrl, readl(&addr->init_ctrl) & ~0x20000000); + + /* For some yet unknown reason, once the PLX9060 reloads the EEPROM, + * the IRQ is lost and, thus, we have to re-write it to the PCI config. + * registers. This will remain here until we find a permanent fix. + */ + pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, irq); +} + +static int __cyz_load_fw(const struct firmware *fw, + const char *name, const u32 mailbox, void __iomem *base, + void __iomem *fpga) +{ + const void *ptr = fw->data; + const struct zfile_header *h = ptr; + const struct zfile_config *c, *cs; + const struct zfile_block *b, *bs; + unsigned int a, tmp, len = fw->size; +#define BAD_FW KERN_ERR "Bad firmware: " + if (len < sizeof(*h)) { + printk(BAD_FW "too short: %u<%zu\n", len, sizeof(*h)); + return -EINVAL; + } + + cs = ptr + h->config_offset; + bs = ptr + h->block_offset; + + if ((void *)(cs + h->n_config) > ptr + len || + (void *)(bs + h->n_blocks) > ptr + len) { + printk(BAD_FW "too short"); + return -EINVAL; + } + + if (cyc_isfwstr(h->name, sizeof(h->name)) || + cyc_isfwstr(h->date, sizeof(h->date))) { + printk(BAD_FW "bad formatted header string\n"); + return -EINVAL; + } + + if (strncmp(name, h->name, sizeof(h->name))) { + printk(BAD_FW "bad name '%s' (expected '%s')\n", h->name, name); + return -EINVAL; + } + + tmp = 0; + for (c = cs; c < cs + h->n_config; c++) { + for (a = 0; a < c->n_blocks; a++) + if (c->block_list[a] > h->n_blocks) { + printk(BAD_FW "bad block ref number in cfgs\n"); + return -EINVAL; + } + if (c->mailbox == mailbox && c->function == 0) /* 0 is normal */ + tmp++; + } + if (!tmp) { + printk(BAD_FW "nothing appropriate\n"); + return -EINVAL; + } + + for (b = bs; b < bs + h->n_blocks; b++) + if (b->file_offset + b->size > len) { + printk(BAD_FW "bad block data offset\n"); + return -EINVAL; + } + + /* everything is OK, let's seek'n'load it */ + for (c = cs; c < cs + h->n_config; c++) + if (c->mailbox == mailbox && c->function == 0) + break; + + for (a = 0; a < c->n_blocks; a++) { + b = &bs[c->block_list[a]]; + if (b->type == ZBLOCK_FPGA) { + if (fpga != NULL) + cyz_fpga_copy(fpga, ptr + b->file_offset, + b->size); + } else { + if (base != NULL) + memcpy_toio(base + b->ram_offset, + ptr + b->file_offset, b->size); + } + } +#undef BAD_FW + return 0; +} + +static int cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr, + struct RUNTIME_9060 __iomem *ctl_addr, int irq) +{ + const struct firmware *fw; + struct FIRM_ID __iomem *fid = base_addr + ID_ADDRESS; + struct CUSTOM_REG __iomem *cust = base_addr; + struct ZFW_CTRL __iomem *pt_zfwctrl; + void __iomem *tmp; + u32 mailbox, status, nchan; + unsigned int i; + int retval; + + retval = request_firmware(&fw, "cyzfirm.bin", &pdev->dev); + if (retval) { + dev_err(&pdev->dev, "can't get firmware\n"); + goto err; + } + + /* Check whether the firmware is already loaded and running. If + positive, skip this board */ + if (__cyz_fpga_loaded(ctl_addr) && readl(&fid->signature) == ZFIRM_ID) { + u32 cntval = readl(base_addr + 0x190); + + udelay(100); + if (cntval != readl(base_addr + 0x190)) { + /* FW counter is working, FW is running */ + dev_dbg(&pdev->dev, "Cyclades-Z FW already loaded. " + "Skipping board.\n"); + retval = 0; + goto err_rel; + } + } + + /* start boot */ + cy_writel(&ctl_addr->intr_ctrl_stat, readl(&ctl_addr->intr_ctrl_stat) & + ~0x00030800UL); + + mailbox = readl(&ctl_addr->mail_box_0); + + if (mailbox == 0 || __cyz_fpga_loaded(ctl_addr)) { + /* stops CPU and set window to beginning of RAM */ + cy_writel(&ctl_addr->loc_addr_base, WIN_CREG); + cy_writel(&cust->cpu_stop, 0); + cy_writel(&ctl_addr->loc_addr_base, WIN_RAM); + udelay(100); + } + + plx_init(pdev, irq, ctl_addr); + + if (mailbox != 0) { + /* load FPGA */ + retval = __cyz_load_fw(fw, "Cyclom-Z", mailbox, NULL, + base_addr); + if (retval) + goto err_rel; + if (!__cyz_fpga_loaded(ctl_addr)) { + dev_err(&pdev->dev, "fw upload successful, but fw is " + "not loaded\n"); + goto err_rel; + } + } + + /* stops CPU and set window to beginning of RAM */ + cy_writel(&ctl_addr->loc_addr_base, WIN_CREG); + cy_writel(&cust->cpu_stop, 0); + cy_writel(&ctl_addr->loc_addr_base, WIN_RAM); + udelay(100); + + /* clear memory */ + for (tmp = base_addr; tmp < base_addr + RAM_SIZE; tmp++) + cy_writeb(tmp, 255); + if (mailbox != 0) { + /* set window to last 512K of RAM */ + cy_writel(&ctl_addr->loc_addr_base, WIN_RAM + RAM_SIZE); + for (tmp = base_addr; tmp < base_addr + RAM_SIZE; tmp++) + cy_writeb(tmp, 255); + /* set window to beginning of RAM */ + cy_writel(&ctl_addr->loc_addr_base, WIN_RAM); + } + + retval = __cyz_load_fw(fw, "Cyclom-Z", mailbox, base_addr, NULL); + release_firmware(fw); + if (retval) + goto err; + + /* finish boot and start boards */ + cy_writel(&ctl_addr->loc_addr_base, WIN_CREG); + cy_writel(&cust->cpu_start, 0); + cy_writel(&ctl_addr->loc_addr_base, WIN_RAM); + i = 0; + while ((status = readl(&fid->signature)) != ZFIRM_ID && i++ < 40) + msleep(100); + if (status != ZFIRM_ID) { + if (status == ZFIRM_HLT) { + dev_err(&pdev->dev, "you need an external power supply " + "for this number of ports. Firmware halted and " + "board reset.\n"); + retval = -EIO; + goto err; + } + dev_warn(&pdev->dev, "fid->signature = 0x%x... Waiting " + "some more time\n", status); + while ((status = readl(&fid->signature)) != ZFIRM_ID && + i++ < 200) + msleep(100); + if (status != ZFIRM_ID) { + dev_err(&pdev->dev, "Board not started in 20 seconds! " + "Giving up. (fid->signature = 0x%x)\n", + status); + dev_info(&pdev->dev, "*** Warning ***: if you are " + "upgrading the FW, please power cycle the " + "system before loading the new FW to the " + "Cyclades-Z.\n"); + + if (__cyz_fpga_loaded(ctl_addr)) + plx_init(pdev, irq, ctl_addr); + + retval = -EIO; + goto err; + } + dev_dbg(&pdev->dev, "Firmware started after %d seconds.\n", + i / 10); + } + pt_zfwctrl = base_addr + readl(&fid->zfwctrl_addr); + + dev_dbg(&pdev->dev, "fid=> %p, zfwctrl_addr=> %x, npt_zfwctrl=> %p\n", + base_addr + ID_ADDRESS, readl(&fid->zfwctrl_addr), + base_addr + readl(&fid->zfwctrl_addr)); + + nchan = readl(&pt_zfwctrl->board_ctrl.n_channel); + dev_info(&pdev->dev, "Cyclades-Z FW loaded: version = %x, ports = %u\n", + readl(&pt_zfwctrl->board_ctrl.fw_version), nchan); + + if (nchan == 0) { + dev_warn(&pdev->dev, "no Cyclades-Z ports were found. Please " + "check the connection between the Z host card and the " + "serial expanders.\n"); + + if (__cyz_fpga_loaded(ctl_addr)) + plx_init(pdev, irq, ctl_addr); + + dev_info(&pdev->dev, "Null number of ports detected. Board " + "reset.\n"); + retval = 0; + goto err; + } + + cy_writel(&pt_zfwctrl->board_ctrl.op_system, C_OS_LINUX); + cy_writel(&pt_zfwctrl->board_ctrl.dr_version, DRIVER_VERSION); + + /* + Early firmware failed to start looking for commands. + This enables firmware interrupts for those commands. + */ + cy_writel(&ctl_addr->intr_ctrl_stat, readl(&ctl_addr->intr_ctrl_stat) | + (1 << 17)); + cy_writel(&ctl_addr->intr_ctrl_stat, readl(&ctl_addr->intr_ctrl_stat) | + 0x00030800UL); + + return nchan; +err_rel: + release_firmware(fw); +err: + return retval; +} + +static int cy_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct cyclades_card *card; + void __iomem *addr0 = NULL, *addr2 = NULL; + char *card_name = NULL; + u32 mailbox; + unsigned int device_id, nchan = 0, card_no, i, j; + unsigned char plx_ver; + int retval, irq; + + retval = pci_enable_device(pdev); + if (retval) { + dev_err(&pdev->dev, "cannot enable device\n"); + goto err; + } + + /* read PCI configuration area */ + irq = pdev->irq; + device_id = pdev->device & ~PCI_DEVICE_ID_MASK; + +#if defined(__alpha__) + if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo) { /* below 1M? */ + dev_err(&pdev->dev, "Cyclom-Y/PCI not supported for low " + "addresses on Alpha systems.\n"); + retval = -EIO; + goto err_dis; + } +#endif + if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Lo) { + dev_err(&pdev->dev, "Cyclades-Z/PCI not supported for low " + "addresses\n"); + retval = -EIO; + goto err_dis; + } + + if (pci_resource_flags(pdev, 2) & IORESOURCE_IO) { + dev_warn(&pdev->dev, "PCI I/O bit incorrectly set. Ignoring " + "it...\n"); + pdev->resource[2].flags &= ~IORESOURCE_IO; + } + + retval = pci_request_regions(pdev, "cyclades"); + if (retval) { + dev_err(&pdev->dev, "failed to reserve resources\n"); + goto err_dis; + } + + retval = -EIO; + if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo || + device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) { + card_name = "Cyclom-Y"; + + addr0 = ioremap(pci_resource_start(pdev, 0), + CyPCI_Yctl); + if (addr0 == NULL) { + dev_err(&pdev->dev, "can't remap ctl region\n"); + goto err_reg; + } + addr2 = ioremap(pci_resource_start(pdev, 2), + CyPCI_Ywin); + if (addr2 == NULL) { + dev_err(&pdev->dev, "can't remap base region\n"); + goto err_unmap; + } + + nchan = CyPORTS_PER_CHIP * cyy_init_card(addr2, 1); + if (nchan == 0) { + dev_err(&pdev->dev, "Cyclom-Y PCI host card with no " + "Serial-Modules\n"); + goto err_unmap; + } + } else if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Hi) { + struct RUNTIME_9060 __iomem *ctl_addr; + + ctl_addr = addr0 = ioremap(pci_resource_start(pdev, 0), + CyPCI_Zctl); + if (addr0 == NULL) { + dev_err(&pdev->dev, "can't remap ctl region\n"); + goto err_reg; + } + + /* Disable interrupts on the PLX before resetting it */ + cy_writew(&ctl_addr->intr_ctrl_stat, + readw(&ctl_addr->intr_ctrl_stat) & ~0x0900); + + plx_init(pdev, irq, addr0); + + mailbox = readl(&ctl_addr->mail_box_0); + + addr2 = ioremap(pci_resource_start(pdev, 2), + mailbox == ZE_V1 ? CyPCI_Ze_win : CyPCI_Zwin); + if (addr2 == NULL) { + dev_err(&pdev->dev, "can't remap base region\n"); + goto err_unmap; + } + + if (mailbox == ZE_V1) { + card_name = "Cyclades-Ze"; + } else { + card_name = "Cyclades-8Zo"; +#ifdef CY_PCI_DEBUG + if (mailbox == ZO_V1) { + cy_writel(&ctl_addr->loc_addr_base, WIN_CREG); + dev_info(&pdev->dev, "Cyclades-8Zo/PCI: FPGA " + "id %lx, ver %lx\n", (ulong)(0xff & + readl(&((struct CUSTOM_REG *)addr2)-> + fpga_id)), (ulong)(0xff & + readl(&((struct CUSTOM_REG *)addr2)-> + fpga_version))); + cy_writel(&ctl_addr->loc_addr_base, WIN_RAM); + } else { + dev_info(&pdev->dev, "Cyclades-Z/PCI: New " + "Cyclades-Z board. FPGA not loaded\n"); + } +#endif + /* The following clears the firmware id word. This + ensures that the driver will not attempt to talk to + the board until it has been properly initialized. + */ + if ((mailbox == ZO_V1) || (mailbox == ZO_V2)) + cy_writel(addr2 + ID_ADDRESS, 0L); + } + + retval = cyz_load_fw(pdev, addr2, addr0, irq); + if (retval <= 0) + goto err_unmap; + nchan = retval; + } + + if ((cy_next_channel + nchan) > NR_PORTS) { + dev_err(&pdev->dev, "Cyclades-8Zo/PCI found, but no " + "channels are available. Change NR_PORTS in " + "cyclades.c and recompile kernel.\n"); + goto err_unmap; + } + /* fill the next cy_card structure available */ + for (card_no = 0; card_no < NR_CARDS; card_no++) { + card = &cy_card[card_no]; + if (card->base_addr == NULL) + break; + } + if (card_no == NR_CARDS) { /* no more cy_cards available */ + dev_err(&pdev->dev, "Cyclades-8Zo/PCI found, but no " + "more cards can be used. Change NR_CARDS in " + "cyclades.c and recompile kernel.\n"); + goto err_unmap; + } + + if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo || + device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) { + /* allocate IRQ */ + retval = request_irq(irq, cyy_interrupt, + IRQF_SHARED, "Cyclom-Y", card); + if (retval) { + dev_err(&pdev->dev, "could not allocate IRQ\n"); + goto err_unmap; + } + card->num_chips = nchan / CyPORTS_PER_CHIP; + } else { + struct FIRM_ID __iomem *firm_id = addr2 + ID_ADDRESS; + struct ZFW_CTRL __iomem *zfw_ctrl; + + zfw_ctrl = addr2 + (readl(&firm_id->zfwctrl_addr) & 0xfffff); + + card->hw_ver = mailbox; + card->num_chips = (unsigned int)-1; + card->board_ctrl = &zfw_ctrl->board_ctrl; +#ifdef CONFIG_CYZ_INTR + /* allocate IRQ only if board has an IRQ */ + if (irq != 0 && irq != 255) { + retval = request_irq(irq, cyz_interrupt, + IRQF_SHARED, "Cyclades-Z", card); + if (retval) { + dev_err(&pdev->dev, "could not allocate IRQ\n"); + goto err_unmap; + } + } +#endif /* CONFIG_CYZ_INTR */ + } + + /* set cy_card */ + card->base_addr = addr2; + card->ctl_addr.p9050 = addr0; + card->irq = irq; + card->bus_index = 1; + card->first_line = cy_next_channel; + card->nports = nchan; + retval = cy_init_card(card); + if (retval) + goto err_null; + + pci_set_drvdata(pdev, card); + + if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo || + device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) { + /* enable interrupts in the PCI interface */ + plx_ver = readb(addr2 + CyPLX_VER) & 0x0f; + switch (plx_ver) { + case PLX_9050: + cy_writeb(addr0 + 0x4c, 0x43); + break; + + case PLX_9060: + case PLX_9080: + default: /* Old boards, use PLX_9060 */ + { + struct RUNTIME_9060 __iomem *ctl_addr = addr0; + plx_init(pdev, irq, ctl_addr); + cy_writew(&ctl_addr->intr_ctrl_stat, + readw(&ctl_addr->intr_ctrl_stat) | 0x0900); + break; + } + } + } + + dev_info(&pdev->dev, "%s/PCI #%d found: %d channels starting from " + "port %d.\n", card_name, card_no + 1, nchan, cy_next_channel); + for (j = 0, i = cy_next_channel; i < cy_next_channel + nchan; i++, j++) + tty_port_register_device(&card->ports[j].port, + cy_serial_driver, i, &pdev->dev); + cy_next_channel += nchan; + + return 0; +err_null: + card->base_addr = NULL; + free_irq(irq, card); +err_unmap: + iounmap(addr0); + if (addr2) + iounmap(addr2); +err_reg: + pci_release_regions(pdev); +err_dis: + pci_disable_device(pdev); +err: + return retval; +} + +static void cy_pci_remove(struct pci_dev *pdev) +{ + struct cyclades_card *cinfo = pci_get_drvdata(pdev); + unsigned int i, channel; + + /* non-Z with old PLX */ + if (!cy_is_Z(cinfo) && (readb(cinfo->base_addr + CyPLX_VER) & 0x0f) == + PLX_9050) + cy_writeb(cinfo->ctl_addr.p9050 + 0x4c, 0); + else +#ifndef CONFIG_CYZ_INTR + if (!cy_is_Z(cinfo)) +#endif + cy_writew(&cinfo->ctl_addr.p9060->intr_ctrl_stat, + readw(&cinfo->ctl_addr.p9060->intr_ctrl_stat) & + ~0x0900); + + iounmap(cinfo->base_addr); + if (cinfo->ctl_addr.p9050) + iounmap(cinfo->ctl_addr.p9050); + if (cinfo->irq +#ifndef CONFIG_CYZ_INTR + && !cy_is_Z(cinfo) +#endif /* CONFIG_CYZ_INTR */ + ) + free_irq(cinfo->irq, cinfo); + pci_release_regions(pdev); + + cinfo->base_addr = NULL; + for (channel = 0, i = cinfo->first_line; i < cinfo->first_line + + cinfo->nports; i++, channel++) { + tty_unregister_device(cy_serial_driver, i); + tty_port_destroy(&cinfo->ports[channel].port); + } + cinfo->nports = 0; + kfree(cinfo->ports); +} + +static struct pci_driver cy_pci_driver = { + .name = "cyclades", + .id_table = cy_pci_dev_id, + .probe = cy_pci_probe, + .remove = cy_pci_remove +}; +#endif + +static int cyclades_proc_show(struct seq_file *m, void *v) +{ + struct cyclades_port *info; + unsigned int i, j; + __u32 cur_jifs = jiffies; + + seq_puts(m, "Dev TimeOpen BytesOut IdleOut BytesIn " + "IdleIn Overruns Ldisc\n"); + + /* Output one line for each known port */ + for (i = 0; i < NR_CARDS; i++) + for (j = 0; j < cy_card[i].nports; j++) { + info = &cy_card[i].ports[j]; + + if (info->port.count) { + /* XXX is the ldisc num worth this? */ + struct tty_struct *tty; + struct tty_ldisc *ld; + int num = 0; + tty = tty_port_tty_get(&info->port); + if (tty) { + ld = tty_ldisc_ref(tty); + if (ld) { + num = ld->ops->num; + tty_ldisc_deref(ld); + } + tty_kref_put(tty); + } + seq_printf(m, "%3d %8lu %10lu %8lu " + "%10lu %8lu %9lu %6d\n", info->line, + (cur_jifs - info->idle_stats.in_use) / + HZ, info->idle_stats.xmit_bytes, + (cur_jifs - info->idle_stats.xmit_idle)/ + HZ, info->idle_stats.recv_bytes, + (cur_jifs - info->idle_stats.recv_idle)/ + HZ, info->idle_stats.overruns, + num); + } else + seq_printf(m, "%3d %8lu %10lu %8lu " + "%10lu %8lu %9lu %6ld\n", + info->line, 0L, 0L, 0L, 0L, 0L, 0L, 0L); + } + return 0; +} + +/* The serial driver boot-time initialization code! + Hardware I/O ports are mapped to character special devices on a + first found, first allocated manner. That is, this code searches + for Cyclom cards in the system. As each is found, it is probed + to discover how many chips (and thus how many ports) are present. + These ports are mapped to the tty ports 32 and upward in monotonic + fashion. If an 8-port card is replaced with a 16-port card, the + port mapping on a following card will shift. + + This approach is different from what is used in the other serial + device driver because the Cyclom is more properly a multiplexer, + not just an aggregation of serial ports on one card. + + If there are more cards with more ports than have been + statically allocated above, a warning is printed and the + extra ports are ignored. + */ + +static const struct tty_operations cy_ops = { + .open = cy_open, + .close = cy_close, + .write = cy_write, + .put_char = cy_put_char, + .flush_chars = cy_flush_chars, + .write_room = cy_write_room, + .chars_in_buffer = cy_chars_in_buffer, + .flush_buffer = cy_flush_buffer, + .ioctl = cy_ioctl, + .throttle = cy_throttle, + .unthrottle = cy_unthrottle, + .set_termios = cy_set_termios, + .stop = cy_stop, + .start = cy_start, + .hangup = cy_hangup, + .break_ctl = cy_break, + .wait_until_sent = cy_wait_until_sent, + .tiocmget = cy_tiocmget, + .tiocmset = cy_tiocmset, + .get_icount = cy_get_icount, + .set_serial = cy_set_serial_info, + .get_serial = cy_get_serial_info, + .proc_show = cyclades_proc_show, +}; + +static int __init cy_init(void) +{ + unsigned int nboards; + int retval = -ENOMEM; + + cy_serial_driver = alloc_tty_driver(NR_PORTS); + if (!cy_serial_driver) + goto err; + + printk(KERN_INFO "Cyclades driver " CY_VERSION "\n"); + + /* Initialize the tty_driver structure */ + + cy_serial_driver->driver_name = "cyclades"; + cy_serial_driver->name = "ttyC"; + cy_serial_driver->major = CYCLADES_MAJOR; + cy_serial_driver->minor_start = 0; + cy_serial_driver->type = TTY_DRIVER_TYPE_SERIAL; + cy_serial_driver->subtype = SERIAL_TYPE_NORMAL; + cy_serial_driver->init_termios = tty_std_termios; + cy_serial_driver->init_termios.c_cflag = + B9600 | CS8 | CREAD | HUPCL | CLOCAL; + cy_serial_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; + tty_set_operations(cy_serial_driver, &cy_ops); + + retval = tty_register_driver(cy_serial_driver); + if (retval) { + printk(KERN_ERR "Couldn't register Cyclades serial driver\n"); + goto err_frtty; + } + + /* the code below is responsible to find the boards. Each different + type of board has its own detection routine. If a board is found, + the next cy_card structure available is set by the detection + routine. These functions are responsible for checking the + availability of cy_card and cy_port data structures and updating + the cy_next_channel. */ + + /* look for isa boards */ + nboards = cy_detect_isa(); + +#ifdef CONFIG_PCI + /* look for pci boards */ + retval = pci_register_driver(&cy_pci_driver); + if (retval && !nboards) { + tty_unregister_driver(cy_serial_driver); + goto err_frtty; + } +#endif + + return 0; +err_frtty: + put_tty_driver(cy_serial_driver); +err: + return retval; +} /* cy_init */ + +static void __exit cy_cleanup_module(void) +{ + struct cyclades_card *card; + unsigned int i, e1; + +#ifndef CONFIG_CYZ_INTR + del_timer_sync(&cyz_timerlist); +#endif /* CONFIG_CYZ_INTR */ + + e1 = tty_unregister_driver(cy_serial_driver); + if (e1) + printk(KERN_ERR "failed to unregister Cyclades serial " + "driver(%d)\n", e1); + +#ifdef CONFIG_PCI + pci_unregister_driver(&cy_pci_driver); +#endif + + for (i = 0; i < NR_CARDS; i++) { + card = &cy_card[i]; + if (card->base_addr) { + /* clear interrupt */ + cy_writeb(card->base_addr + Cy_ClrIntr, 0); + iounmap(card->base_addr); + if (card->ctl_addr.p9050) + iounmap(card->ctl_addr.p9050); + if (card->irq +#ifndef CONFIG_CYZ_INTR + && !cy_is_Z(card) +#endif /* CONFIG_CYZ_INTR */ + ) + free_irq(card->irq, card); + for (e1 = card->first_line; e1 < card->first_line + + card->nports; e1++) + tty_unregister_device(cy_serial_driver, e1); + kfree(card->ports); + } + } + + put_tty_driver(cy_serial_driver); +} /* cy_cleanup_module */ + +module_init(cy_init); +module_exit(cy_cleanup_module); + +MODULE_LICENSE("GPL"); +MODULE_VERSION(CY_VERSION); +MODULE_ALIAS_CHARDEV_MAJOR(CYCLADES_MAJOR); +MODULE_FIRMWARE("cyzfirm.bin"); diff --git a/drivers/tty/ehv_bytechan.c b/drivers/tty/ehv_bytechan.c new file mode 100644 index 000000000..3c6dd06ec --- /dev/null +++ b/drivers/tty/ehv_bytechan.c @@ -0,0 +1,814 @@ +// SPDX-License-Identifier: GPL-2.0 +/* ePAPR hypervisor byte channel device driver + * + * Copyright 2009-2011 Freescale Semiconductor, Inc. + * + * Author: Timur Tabi + * + * This driver support three distinct interfaces, all of which are related to + * ePAPR hypervisor byte channels. + * + * 1) An early-console (udbg) driver. This provides early console output + * through a byte channel. The byte channel handle must be specified in a + * Kconfig option. + * + * 2) A normal console driver. Output is sent to the byte channel designated + * for stdout in the device tree. The console driver is for handling kernel + * printk calls. + * + * 3) A tty driver, which is used to handle user-space input and output. The + * byte channel used for the console is designated as the default tty. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* The size of the transmit circular buffer. This must be a power of two. */ +#define BUF_SIZE 2048 + +/* Per-byte channel private data */ +struct ehv_bc_data { + struct device *dev; + struct tty_port port; + uint32_t handle; + unsigned int rx_irq; + unsigned int tx_irq; + + spinlock_t lock; /* lock for transmit buffer */ + unsigned char buf[BUF_SIZE]; /* transmit circular buffer */ + unsigned int head; /* circular buffer head */ + unsigned int tail; /* circular buffer tail */ + + int tx_irq_enabled; /* true == TX interrupt is enabled */ +}; + +/* Array of byte channel objects */ +static struct ehv_bc_data *bcs; + +/* Byte channel handle for stdout (and stdin), taken from device tree */ +static unsigned int stdout_bc; + +/* Virtual IRQ for the byte channel handle for stdin, taken from device tree */ +static unsigned int stdout_irq; + +/**************************** SUPPORT FUNCTIONS ****************************/ + +/* + * Enable the transmit interrupt + * + * Unlike a serial device, byte channels have no mechanism for disabling their + * own receive or transmit interrupts. To emulate that feature, we toggle + * the IRQ in the kernel. + * + * We cannot just blindly call enable_irq() or disable_irq(), because these + * calls are reference counted. This means that we cannot call enable_irq() + * if interrupts are already enabled. This can happen in two situations: + * + * 1. The tty layer makes two back-to-back calls to ehv_bc_tty_write() + * 2. A transmit interrupt occurs while executing ehv_bc_tx_dequeue() + * + * To work around this, we keep a flag to tell us if the IRQ is enabled or not. + */ +static void enable_tx_interrupt(struct ehv_bc_data *bc) +{ + if (!bc->tx_irq_enabled) { + enable_irq(bc->tx_irq); + bc->tx_irq_enabled = 1; + } +} + +static void disable_tx_interrupt(struct ehv_bc_data *bc) +{ + if (bc->tx_irq_enabled) { + disable_irq_nosync(bc->tx_irq); + bc->tx_irq_enabled = 0; + } +} + +/* + * find the byte channel handle to use for the console + * + * The byte channel to be used for the console is specified via a "stdout" + * property in the /chosen node. + */ +static int find_console_handle(void) +{ + struct device_node *np = of_stdout; + const uint32_t *iprop; + + /* We don't care what the aliased node is actually called. We only + * care if it's compatible with "epapr,hv-byte-channel", because that + * indicates that it's a byte channel node. + */ + if (!np || !of_device_is_compatible(np, "epapr,hv-byte-channel")) + return 0; + + stdout_irq = irq_of_parse_and_map(np, 0); + if (stdout_irq == NO_IRQ) { + pr_err("ehv-bc: no 'interrupts' property in %pOF node\n", np); + return 0; + } + + /* + * The 'hv-handle' property contains the handle for this byte channel. + */ + iprop = of_get_property(np, "hv-handle", NULL); + if (!iprop) { + pr_err("ehv-bc: no 'hv-handle' property in %pOFn node\n", + np); + return 0; + } + stdout_bc = be32_to_cpu(*iprop); + return 1; +} + +static unsigned int local_ev_byte_channel_send(unsigned int handle, + unsigned int *count, + const char *p) +{ + char buffer[EV_BYTE_CHANNEL_MAX_BYTES]; + unsigned int c = *count; + + if (c < sizeof(buffer)) { + memcpy(buffer, p, c); + memset(&buffer[c], 0, sizeof(buffer) - c); + p = buffer; + } + return ev_byte_channel_send(handle, count, p); +} + +/*************************** EARLY CONSOLE DRIVER ***************************/ + +#ifdef CONFIG_PPC_EARLY_DEBUG_EHV_BC + +/* + * send a byte to a byte channel, wait if necessary + * + * This function sends a byte to a byte channel, and it waits and + * retries if the byte channel is full. It returns if the character + * has been sent, or if some error has occurred. + * + */ +static void byte_channel_spin_send(const char data) +{ + int ret, count; + + do { + count = 1; + ret = local_ev_byte_channel_send(CONFIG_PPC_EARLY_DEBUG_EHV_BC_HANDLE, + &count, &data); + } while (ret == EV_EAGAIN); +} + +/* + * The udbg subsystem calls this function to display a single character. + * We convert CR to a CR/LF. + */ +static void ehv_bc_udbg_putc(char c) +{ + if (c == '\n') + byte_channel_spin_send('\r'); + + byte_channel_spin_send(c); +} + +/* + * early console initialization + * + * PowerPC kernels support an early printk console, also known as udbg. + * This function must be called via the ppc_md.init_early function pointer. + * At this point, the device tree has been unflattened, so we can obtain the + * byte channel handle for stdout. + * + * We only support displaying of characters (putc). We do not support + * keyboard input. + */ +void __init udbg_init_ehv_bc(void) +{ + unsigned int rx_count, tx_count; + unsigned int ret; + + /* Verify the byte channel handle */ + ret = ev_byte_channel_poll(CONFIG_PPC_EARLY_DEBUG_EHV_BC_HANDLE, + &rx_count, &tx_count); + if (ret) + return; + + udbg_putc = ehv_bc_udbg_putc; + register_early_udbg_console(); + + udbg_printf("ehv-bc: early console using byte channel handle %u\n", + CONFIG_PPC_EARLY_DEBUG_EHV_BC_HANDLE); +} + +#endif + +/****************************** CONSOLE DRIVER ******************************/ + +static struct tty_driver *ehv_bc_driver; + +/* + * Byte channel console sending worker function. + * + * For consoles, if the output buffer is full, we should just spin until it + * clears. + */ +static int ehv_bc_console_byte_channel_send(unsigned int handle, const char *s, + unsigned int count) +{ + unsigned int len; + int ret = 0; + + while (count) { + len = min_t(unsigned int, count, EV_BYTE_CHANNEL_MAX_BYTES); + do { + ret = local_ev_byte_channel_send(handle, &len, s); + } while (ret == EV_EAGAIN); + count -= len; + s += len; + } + + return ret; +} + +/* + * write a string to the console + * + * This function gets called to write a string from the kernel, typically from + * a printk(). This function spins until all data is written. + * + * We copy the data to a temporary buffer because we need to insert a \r in + * front of every \n. It's more efficient to copy the data to the buffer than + * it is to make multiple hcalls for each character or each newline. + */ +static void ehv_bc_console_write(struct console *co, const char *s, + unsigned int count) +{ + char s2[EV_BYTE_CHANNEL_MAX_BYTES]; + unsigned int i, j = 0; + char c; + + for (i = 0; i < count; i++) { + c = *s++; + + if (c == '\n') + s2[j++] = '\r'; + + s2[j++] = c; + if (j >= (EV_BYTE_CHANNEL_MAX_BYTES - 1)) { + if (ehv_bc_console_byte_channel_send(stdout_bc, s2, j)) + return; + j = 0; + } + } + + if (j) + ehv_bc_console_byte_channel_send(stdout_bc, s2, j); +} + +/* + * When /dev/console is opened, the kernel iterates the console list looking + * for one with ->device and then calls that method. On success, it expects + * the passed-in int* to contain the minor number to use. + */ +static struct tty_driver *ehv_bc_console_device(struct console *co, int *index) +{ + *index = co->index; + + return ehv_bc_driver; +} + +static struct console ehv_bc_console = { + .name = "ttyEHV", + .write = ehv_bc_console_write, + .device = ehv_bc_console_device, + .flags = CON_PRINTBUFFER | CON_ENABLED, +}; + +/* + * Console initialization + * + * This is the first function that is called after the device tree is + * available, so here is where we determine the byte channel handle and IRQ for + * stdout/stdin, even though that information is used by the tty and character + * drivers. + */ +static int __init ehv_bc_console_init(void) +{ + if (!find_console_handle()) { + pr_debug("ehv-bc: stdout is not a byte channel\n"); + return -ENODEV; + } + +#ifdef CONFIG_PPC_EARLY_DEBUG_EHV_BC + /* Print a friendly warning if the user chose the wrong byte channel + * handle for udbg. + */ + if (stdout_bc != CONFIG_PPC_EARLY_DEBUG_EHV_BC_HANDLE) + pr_warn("ehv-bc: udbg handle %u is not the stdout handle\n", + CONFIG_PPC_EARLY_DEBUG_EHV_BC_HANDLE); +#endif + + /* add_preferred_console() must be called before register_console(), + otherwise it won't work. However, we don't want to enumerate all the + byte channels here, either, since we only care about one. */ + + add_preferred_console(ehv_bc_console.name, ehv_bc_console.index, NULL); + register_console(&ehv_bc_console); + + pr_info("ehv-bc: registered console driver for byte channel %u\n", + stdout_bc); + + return 0; +} +console_initcall(ehv_bc_console_init); + +/******************************** TTY DRIVER ********************************/ + +/* + * byte channel receive interrupt handler + * + * This ISR is called whenever data is available on a byte channel. + */ +static irqreturn_t ehv_bc_tty_rx_isr(int irq, void *data) +{ + struct ehv_bc_data *bc = data; + unsigned int rx_count, tx_count, len; + int count; + char buffer[EV_BYTE_CHANNEL_MAX_BYTES]; + int ret; + + /* Find out how much data needs to be read, and then ask the TTY layer + * if it can handle that much. We want to ensure that every byte we + * read from the byte channel will be accepted by the TTY layer. + */ + ev_byte_channel_poll(bc->handle, &rx_count, &tx_count); + count = tty_buffer_request_room(&bc->port, rx_count); + + /* 'count' is the maximum amount of data the TTY layer can accept at + * this time. However, during testing, I was never able to get 'count' + * to be less than 'rx_count'. I'm not sure whether I'm calling it + * correctly. + */ + + while (count > 0) { + len = min_t(unsigned int, count, sizeof(buffer)); + + /* Read some data from the byte channel. This function will + * never return more than EV_BYTE_CHANNEL_MAX_BYTES bytes. + */ + ev_byte_channel_receive(bc->handle, &len, buffer); + + /* 'len' is now the amount of data that's been received. 'len' + * can't be zero, and most likely it's equal to one. + */ + + /* Pass the received data to the tty layer. */ + ret = tty_insert_flip_string(&bc->port, buffer, len); + + /* 'ret' is the number of bytes that the TTY layer accepted. + * If it's not equal to 'len', then it means the buffer is + * full, which should never happen. If it does happen, we can + * exit gracefully, but we drop the last 'len - ret' characters + * that we read from the byte channel. + */ + if (ret != len) + break; + + count -= len; + } + + /* Tell the tty layer that we're done. */ + tty_flip_buffer_push(&bc->port); + + return IRQ_HANDLED; +} + +/* + * dequeue the transmit buffer to the hypervisor + * + * This function, which can be called in interrupt context, dequeues as much + * data as possible from the transmit buffer to the byte channel. + */ +static void ehv_bc_tx_dequeue(struct ehv_bc_data *bc) +{ + unsigned int count; + unsigned int len, ret; + unsigned long flags; + + do { + spin_lock_irqsave(&bc->lock, flags); + len = min_t(unsigned int, + CIRC_CNT_TO_END(bc->head, bc->tail, BUF_SIZE), + EV_BYTE_CHANNEL_MAX_BYTES); + + ret = local_ev_byte_channel_send(bc->handle, &len, bc->buf + bc->tail); + + /* 'len' is valid only if the return code is 0 or EV_EAGAIN */ + if (!ret || (ret == EV_EAGAIN)) + bc->tail = (bc->tail + len) & (BUF_SIZE - 1); + + count = CIRC_CNT(bc->head, bc->tail, BUF_SIZE); + spin_unlock_irqrestore(&bc->lock, flags); + } while (count && !ret); + + spin_lock_irqsave(&bc->lock, flags); + if (CIRC_CNT(bc->head, bc->tail, BUF_SIZE)) + /* + * If we haven't emptied the buffer, then enable the TX IRQ. + * We'll get an interrupt when there's more room in the + * hypervisor's output buffer. + */ + enable_tx_interrupt(bc); + else + disable_tx_interrupt(bc); + spin_unlock_irqrestore(&bc->lock, flags); +} + +/* + * byte channel transmit interrupt handler + * + * This ISR is called whenever space becomes available for transmitting + * characters on a byte channel. + */ +static irqreturn_t ehv_bc_tty_tx_isr(int irq, void *data) +{ + struct ehv_bc_data *bc = data; + + ehv_bc_tx_dequeue(bc); + tty_port_tty_wakeup(&bc->port); + + return IRQ_HANDLED; +} + +/* + * This function is called when the tty layer has data for us send. We store + * the data first in a circular buffer, and then dequeue as much of that data + * as possible. + * + * We don't need to worry about whether there is enough room in the buffer for + * all the data. The purpose of ehv_bc_tty_write_room() is to tell the tty + * layer how much data it can safely send to us. We guarantee that + * ehv_bc_tty_write_room() will never lie, so the tty layer will never send us + * too much data. + */ +static int ehv_bc_tty_write(struct tty_struct *ttys, const unsigned char *s, + int count) +{ + struct ehv_bc_data *bc = ttys->driver_data; + unsigned long flags; + unsigned int len; + unsigned int written = 0; + + while (1) { + spin_lock_irqsave(&bc->lock, flags); + len = CIRC_SPACE_TO_END(bc->head, bc->tail, BUF_SIZE); + if (count < len) + len = count; + if (len) { + memcpy(bc->buf + bc->head, s, len); + bc->head = (bc->head + len) & (BUF_SIZE - 1); + } + spin_unlock_irqrestore(&bc->lock, flags); + if (!len) + break; + + s += len; + count -= len; + written += len; + } + + ehv_bc_tx_dequeue(bc); + + return written; +} + +/* + * This function can be called multiple times for a given tty_struct, which is + * why we initialize bc->ttys in ehv_bc_tty_port_activate() instead. + * + * The tty layer will still call this function even if the device was not + * registered (i.e. tty_register_device() was not called). This happens + * because tty_register_device() is optional and some legacy drivers don't + * use it. So we need to check for that. + */ +static int ehv_bc_tty_open(struct tty_struct *ttys, struct file *filp) +{ + struct ehv_bc_data *bc = &bcs[ttys->index]; + + if (!bc->dev) + return -ENODEV; + + return tty_port_open(&bc->port, ttys, filp); +} + +/* + * Amazingly, if ehv_bc_tty_open() returns an error code, the tty layer will + * still call this function to close the tty device. So we can't assume that + * the tty port has been initialized. + */ +static void ehv_bc_tty_close(struct tty_struct *ttys, struct file *filp) +{ + struct ehv_bc_data *bc = &bcs[ttys->index]; + + if (bc->dev) + tty_port_close(&bc->port, ttys, filp); +} + +/* + * Return the amount of space in the output buffer + * + * This is actually a contract between the driver and the tty layer outlining + * how much write room the driver can guarantee will be sent OR BUFFERED. This + * driver MUST honor the return value. + */ +static int ehv_bc_tty_write_room(struct tty_struct *ttys) +{ + struct ehv_bc_data *bc = ttys->driver_data; + unsigned long flags; + int count; + + spin_lock_irqsave(&bc->lock, flags); + count = CIRC_SPACE(bc->head, bc->tail, BUF_SIZE); + spin_unlock_irqrestore(&bc->lock, flags); + + return count; +} + +/* + * Stop sending data to the tty layer + * + * This function is called when the tty layer's input buffers are getting full, + * so the driver should stop sending it data. The easiest way to do this is to + * disable the RX IRQ, which will prevent ehv_bc_tty_rx_isr() from being + * called. + * + * The hypervisor will continue to queue up any incoming data. If there is any + * data in the queue when the RX interrupt is enabled, we'll immediately get an + * RX interrupt. + */ +static void ehv_bc_tty_throttle(struct tty_struct *ttys) +{ + struct ehv_bc_data *bc = ttys->driver_data; + + disable_irq(bc->rx_irq); +} + +/* + * Resume sending data to the tty layer + * + * This function is called after previously calling ehv_bc_tty_throttle(). The + * tty layer's input buffers now have more room, so the driver can resume + * sending it data. + */ +static void ehv_bc_tty_unthrottle(struct tty_struct *ttys) +{ + struct ehv_bc_data *bc = ttys->driver_data; + + /* If there is any data in the queue when the RX interrupt is enabled, + * we'll immediately get an RX interrupt. + */ + enable_irq(bc->rx_irq); +} + +static void ehv_bc_tty_hangup(struct tty_struct *ttys) +{ + struct ehv_bc_data *bc = ttys->driver_data; + + ehv_bc_tx_dequeue(bc); + tty_port_hangup(&bc->port); +} + +/* + * TTY driver operations + * + * If we could ask the hypervisor how much data is still in the TX buffer, or + * at least how big the TX buffers are, then we could implement the + * .wait_until_sent and .chars_in_buffer functions. + */ +static const struct tty_operations ehv_bc_ops = { + .open = ehv_bc_tty_open, + .close = ehv_bc_tty_close, + .write = ehv_bc_tty_write, + .write_room = ehv_bc_tty_write_room, + .throttle = ehv_bc_tty_throttle, + .unthrottle = ehv_bc_tty_unthrottle, + .hangup = ehv_bc_tty_hangup, +}; + +/* + * initialize the TTY port + * + * This function will only be called once, no matter how many times + * ehv_bc_tty_open() is called. That's why we register the ISR here, and also + * why we initialize tty_struct-related variables here. + */ +static int ehv_bc_tty_port_activate(struct tty_port *port, + struct tty_struct *ttys) +{ + struct ehv_bc_data *bc = container_of(port, struct ehv_bc_data, port); + int ret; + + ttys->driver_data = bc; + + ret = request_irq(bc->rx_irq, ehv_bc_tty_rx_isr, 0, "ehv-bc", bc); + if (ret < 0) { + dev_err(bc->dev, "could not request rx irq %u (ret=%i)\n", + bc->rx_irq, ret); + return ret; + } + + /* request_irq also enables the IRQ */ + bc->tx_irq_enabled = 1; + + ret = request_irq(bc->tx_irq, ehv_bc_tty_tx_isr, 0, "ehv-bc", bc); + if (ret < 0) { + dev_err(bc->dev, "could not request tx irq %u (ret=%i)\n", + bc->tx_irq, ret); + free_irq(bc->rx_irq, bc); + return ret; + } + + /* The TX IRQ is enabled only when we can't write all the data to the + * byte channel at once, so by default it's disabled. + */ + disable_tx_interrupt(bc); + + return 0; +} + +static void ehv_bc_tty_port_shutdown(struct tty_port *port) +{ + struct ehv_bc_data *bc = container_of(port, struct ehv_bc_data, port); + + free_irq(bc->tx_irq, bc); + free_irq(bc->rx_irq, bc); +} + +static const struct tty_port_operations ehv_bc_tty_port_ops = { + .activate = ehv_bc_tty_port_activate, + .shutdown = ehv_bc_tty_port_shutdown, +}; + +static int ehv_bc_tty_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct ehv_bc_data *bc; + const uint32_t *iprop; + unsigned int handle; + int ret; + static unsigned int index = 1; + unsigned int i; + + iprop = of_get_property(np, "hv-handle", NULL); + if (!iprop) { + dev_err(&pdev->dev, "no 'hv-handle' property in %pOFn node\n", + np); + return -ENODEV; + } + + /* We already told the console layer that the index for the console + * device is zero, so we need to make sure that we use that index when + * we probe the console byte channel node. + */ + handle = be32_to_cpu(*iprop); + i = (handle == stdout_bc) ? 0 : index++; + bc = &bcs[i]; + + bc->handle = handle; + bc->head = 0; + bc->tail = 0; + spin_lock_init(&bc->lock); + + bc->rx_irq = irq_of_parse_and_map(np, 0); + bc->tx_irq = irq_of_parse_and_map(np, 1); + if ((bc->rx_irq == NO_IRQ) || (bc->tx_irq == NO_IRQ)) { + dev_err(&pdev->dev, "no 'interrupts' property in %pOFn node\n", + np); + ret = -ENODEV; + goto error; + } + + tty_port_init(&bc->port); + bc->port.ops = &ehv_bc_tty_port_ops; + + bc->dev = tty_port_register_device(&bc->port, ehv_bc_driver, i, + &pdev->dev); + if (IS_ERR(bc->dev)) { + ret = PTR_ERR(bc->dev); + dev_err(&pdev->dev, "could not register tty (ret=%i)\n", ret); + goto error; + } + + dev_set_drvdata(&pdev->dev, bc); + + dev_info(&pdev->dev, "registered /dev/%s%u for byte channel %u\n", + ehv_bc_driver->name, i, bc->handle); + + return 0; + +error: + tty_port_destroy(&bc->port); + irq_dispose_mapping(bc->tx_irq); + irq_dispose_mapping(bc->rx_irq); + + memset(bc, 0, sizeof(struct ehv_bc_data)); + return ret; +} + +static const struct of_device_id ehv_bc_tty_of_ids[] = { + { .compatible = "epapr,hv-byte-channel" }, + {} +}; + +static struct platform_driver ehv_bc_tty_driver = { + .driver = { + .name = "ehv-bc", + .of_match_table = ehv_bc_tty_of_ids, + .suppress_bind_attrs = true, + }, + .probe = ehv_bc_tty_probe, +}; + +/** + * ehv_bc_init - ePAPR hypervisor byte channel driver initialization + * + * This function is called when this driver is loaded. + */ +static int __init ehv_bc_init(void) +{ + struct device_node *np; + unsigned int count = 0; /* Number of elements in bcs[] */ + int ret; + + pr_info("ePAPR hypervisor byte channel driver\n"); + + /* Count the number of byte channels */ + for_each_compatible_node(np, NULL, "epapr,hv-byte-channel") + count++; + + if (!count) + return -ENODEV; + + /* The array index of an element in bcs[] is the same as the tty index + * for that element. If you know the address of an element in the + * array, then you can use pointer math (e.g. "bc - bcs") to get its + * tty index. + */ + bcs = kcalloc(count, sizeof(struct ehv_bc_data), GFP_KERNEL); + if (!bcs) + return -ENOMEM; + + ehv_bc_driver = alloc_tty_driver(count); + if (!ehv_bc_driver) { + ret = -ENOMEM; + goto err_free_bcs; + } + + ehv_bc_driver->driver_name = "ehv-bc"; + ehv_bc_driver->name = ehv_bc_console.name; + ehv_bc_driver->type = TTY_DRIVER_TYPE_CONSOLE; + ehv_bc_driver->subtype = SYSTEM_TYPE_CONSOLE; + ehv_bc_driver->init_termios = tty_std_termios; + ehv_bc_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; + tty_set_operations(ehv_bc_driver, &ehv_bc_ops); + + ret = tty_register_driver(ehv_bc_driver); + if (ret) { + pr_err("ehv-bc: could not register tty driver (ret=%i)\n", ret); + goto err_put_tty_driver; + } + + ret = platform_driver_register(&ehv_bc_tty_driver); + if (ret) { + pr_err("ehv-bc: could not register platform driver (ret=%i)\n", + ret); + goto err_deregister_tty_driver; + } + + return 0; + +err_deregister_tty_driver: + tty_unregister_driver(ehv_bc_driver); +err_put_tty_driver: + put_tty_driver(ehv_bc_driver); +err_free_bcs: + kfree(bcs); + + return ret; +} +device_initcall(ehv_bc_init); diff --git a/drivers/tty/goldfish.c b/drivers/tty/goldfish.c new file mode 100644 index 000000000..d6e82eb61 --- /dev/null +++ b/drivers/tty/goldfish.c @@ -0,0 +1,484 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2007 Google, Inc. + * Copyright (C) 2012 Intel, Inc. + * Copyright (C) 2017 Imagination Technologies Ltd. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Goldfish tty register's offsets */ +#define GOLDFISH_TTY_REG_BYTES_READY 0x04 +#define GOLDFISH_TTY_REG_CMD 0x08 +#define GOLDFISH_TTY_REG_DATA_PTR 0x10 +#define GOLDFISH_TTY_REG_DATA_LEN 0x14 +#define GOLDFISH_TTY_REG_DATA_PTR_HIGH 0x18 +#define GOLDFISH_TTY_REG_VERSION 0x20 + +/* Goldfish tty commands */ +#define GOLDFISH_TTY_CMD_INT_DISABLE 0 +#define GOLDFISH_TTY_CMD_INT_ENABLE 1 +#define GOLDFISH_TTY_CMD_WRITE_BUFFER 2 +#define GOLDFISH_TTY_CMD_READ_BUFFER 3 + +struct goldfish_tty { + struct tty_port port; + spinlock_t lock; + void __iomem *base; + u32 irq; + int opencount; + struct console console; + u32 version; + struct device *dev; +}; + +static DEFINE_MUTEX(goldfish_tty_lock); +static struct tty_driver *goldfish_tty_driver; +static u32 goldfish_tty_line_count = 8; +static u32 goldfish_tty_current_line_count; +static struct goldfish_tty *goldfish_ttys; + +static void do_rw_io(struct goldfish_tty *qtty, + unsigned long address, + unsigned int count, + int is_write) +{ + unsigned long irq_flags; + void __iomem *base = qtty->base; + + spin_lock_irqsave(&qtty->lock, irq_flags); + gf_write_ptr((void *)address, base + GOLDFISH_TTY_REG_DATA_PTR, + base + GOLDFISH_TTY_REG_DATA_PTR_HIGH); + writel(count, base + GOLDFISH_TTY_REG_DATA_LEN); + + if (is_write) + writel(GOLDFISH_TTY_CMD_WRITE_BUFFER, + base + GOLDFISH_TTY_REG_CMD); + else + writel(GOLDFISH_TTY_CMD_READ_BUFFER, + base + GOLDFISH_TTY_REG_CMD); + + spin_unlock_irqrestore(&qtty->lock, irq_flags); +} + +static void goldfish_tty_rw(struct goldfish_tty *qtty, + unsigned long addr, + unsigned int count, + int is_write) +{ + dma_addr_t dma_handle; + enum dma_data_direction dma_dir; + + dma_dir = (is_write ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + if (qtty->version > 0) { + /* + * Goldfish TTY for Ranchu platform uses + * physical addresses and DMA for read/write operations + */ + unsigned long addr_end = addr + count; + + while (addr < addr_end) { + unsigned long pg_end = (addr & PAGE_MASK) + PAGE_SIZE; + unsigned long next = + pg_end < addr_end ? pg_end : addr_end; + unsigned long avail = next - addr; + + /* + * Map the buffer's virtual address to the DMA address + * so the buffer can be accessed by the device. + */ + dma_handle = dma_map_single(qtty->dev, (void *)addr, + avail, dma_dir); + + if (dma_mapping_error(qtty->dev, dma_handle)) { + dev_err(qtty->dev, "tty: DMA mapping error.\n"); + return; + } + do_rw_io(qtty, dma_handle, avail, is_write); + + /* + * Unmap the previously mapped region after + * the completion of the read/write operation. + */ + dma_unmap_single(qtty->dev, dma_handle, avail, dma_dir); + + addr += avail; + } + } else { + /* + * Old style Goldfish TTY used on the Goldfish platform + * uses virtual addresses. + */ + do_rw_io(qtty, addr, count, is_write); + } +} + +static void goldfish_tty_do_write(int line, const char *buf, + unsigned int count) +{ + struct goldfish_tty *qtty = &goldfish_ttys[line]; + unsigned long address = (unsigned long)(void *)buf; + + goldfish_tty_rw(qtty, address, count, 1); +} + +static irqreturn_t goldfish_tty_interrupt(int irq, void *dev_id) +{ + struct goldfish_tty *qtty = dev_id; + void __iomem *base = qtty->base; + unsigned long address; + unsigned char *buf; + u32 count; + + count = readl(base + GOLDFISH_TTY_REG_BYTES_READY); + if (count == 0) + return IRQ_NONE; + + count = tty_prepare_flip_string(&qtty->port, &buf, count); + + address = (unsigned long)(void *)buf; + goldfish_tty_rw(qtty, address, count, 0); + + tty_flip_buffer_push(&qtty->port); + return IRQ_HANDLED; +} + +static int goldfish_tty_activate(struct tty_port *port, struct tty_struct *tty) +{ + struct goldfish_tty *qtty = container_of(port, struct goldfish_tty, + port); + writel(GOLDFISH_TTY_CMD_INT_ENABLE, qtty->base + GOLDFISH_TTY_REG_CMD); + return 0; +} + +static void goldfish_tty_shutdown(struct tty_port *port) +{ + struct goldfish_tty *qtty = container_of(port, struct goldfish_tty, + port); + writel(GOLDFISH_TTY_CMD_INT_DISABLE, qtty->base + GOLDFISH_TTY_REG_CMD); +} + +static int goldfish_tty_open(struct tty_struct *tty, struct file *filp) +{ + struct goldfish_tty *qtty = &goldfish_ttys[tty->index]; + return tty_port_open(&qtty->port, tty, filp); +} + +static void goldfish_tty_close(struct tty_struct *tty, struct file *filp) +{ + tty_port_close(tty->port, tty, filp); +} + +static void goldfish_tty_hangup(struct tty_struct *tty) +{ + tty_port_hangup(tty->port); +} + +static int goldfish_tty_write(struct tty_struct *tty, const unsigned char *buf, + int count) +{ + goldfish_tty_do_write(tty->index, buf, count); + return count; +} + +static int goldfish_tty_write_room(struct tty_struct *tty) +{ + return 0x10000; +} + +static int goldfish_tty_chars_in_buffer(struct tty_struct *tty) +{ + struct goldfish_tty *qtty = &goldfish_ttys[tty->index]; + void __iomem *base = qtty->base; + return readl(base + GOLDFISH_TTY_REG_BYTES_READY); +} + +static void goldfish_tty_console_write(struct console *co, const char *b, + unsigned count) +{ + goldfish_tty_do_write(co->index, b, count); +} + +static struct tty_driver *goldfish_tty_console_device(struct console *c, + int *index) +{ + *index = c->index; + return goldfish_tty_driver; +} + +static int goldfish_tty_console_setup(struct console *co, char *options) +{ + if ((unsigned)co->index >= goldfish_tty_line_count) + return -ENODEV; + if (!goldfish_ttys[co->index].base) + return -ENODEV; + return 0; +} + +static const struct tty_port_operations goldfish_port_ops = { + .activate = goldfish_tty_activate, + .shutdown = goldfish_tty_shutdown +}; + +static const struct tty_operations goldfish_tty_ops = { + .open = goldfish_tty_open, + .close = goldfish_tty_close, + .hangup = goldfish_tty_hangup, + .write = goldfish_tty_write, + .write_room = goldfish_tty_write_room, + .chars_in_buffer = goldfish_tty_chars_in_buffer, +}; + +static int goldfish_tty_create_driver(void) +{ + int ret; + struct tty_driver *tty; + + goldfish_ttys = kcalloc(goldfish_tty_line_count, + sizeof(*goldfish_ttys), + GFP_KERNEL); + if (goldfish_ttys == NULL) { + ret = -ENOMEM; + goto err_alloc_goldfish_ttys_failed; + } + tty = alloc_tty_driver(goldfish_tty_line_count); + if (tty == NULL) { + ret = -ENOMEM; + goto err_alloc_tty_driver_failed; + } + tty->driver_name = "goldfish"; + tty->name = "ttyGF"; + tty->type = TTY_DRIVER_TYPE_SERIAL; + tty->subtype = SERIAL_TYPE_NORMAL; + tty->init_termios = tty_std_termios; + tty->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW | + TTY_DRIVER_DYNAMIC_DEV; + tty_set_operations(tty, &goldfish_tty_ops); + ret = tty_register_driver(tty); + if (ret) + goto err_tty_register_driver_failed; + + goldfish_tty_driver = tty; + return 0; + +err_tty_register_driver_failed: + put_tty_driver(tty); +err_alloc_tty_driver_failed: + kfree(goldfish_ttys); + goldfish_ttys = NULL; +err_alloc_goldfish_ttys_failed: + return ret; +} + +static void goldfish_tty_delete_driver(void) +{ + tty_unregister_driver(goldfish_tty_driver); + put_tty_driver(goldfish_tty_driver); + goldfish_tty_driver = NULL; + kfree(goldfish_ttys); + goldfish_ttys = NULL; +} + +static int goldfish_tty_probe(struct platform_device *pdev) +{ + struct goldfish_tty *qtty; + int ret = -ENODEV; + struct resource *r; + struct device *ttydev; + void __iomem *base; + u32 irq; + unsigned int line; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) { + pr_err("goldfish_tty: No MEM resource available!\n"); + return -ENOMEM; + } + + base = ioremap(r->start, 0x1000); + if (!base) { + pr_err("goldfish_tty: Unable to ioremap base!\n"); + return -ENOMEM; + } + + r = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!r) { + pr_err("goldfish_tty: No IRQ resource available!\n"); + goto err_unmap; + } + + irq = r->start; + + mutex_lock(&goldfish_tty_lock); + + if (pdev->id == PLATFORM_DEVID_NONE) + line = goldfish_tty_current_line_count; + else + line = pdev->id; + + if (line >= goldfish_tty_line_count) { + pr_err("goldfish_tty: Reached maximum tty number of %d.\n", + goldfish_tty_current_line_count); + ret = -ENOMEM; + goto err_unlock; + } + + if (goldfish_tty_current_line_count == 0) { + ret = goldfish_tty_create_driver(); + if (ret) + goto err_unlock; + } + goldfish_tty_current_line_count++; + + qtty = &goldfish_ttys[line]; + spin_lock_init(&qtty->lock); + tty_port_init(&qtty->port); + qtty->port.ops = &goldfish_port_ops; + qtty->base = base; + qtty->irq = irq; + qtty->dev = &pdev->dev; + + /* + * Goldfish TTY device used by the Goldfish emulator + * should identify itself with 0, forcing the driver + * to use virtual addresses. Goldfish TTY device + * on Ranchu emulator (qemu2) returns 1 here and + * driver will use physical addresses. + */ + qtty->version = readl(base + GOLDFISH_TTY_REG_VERSION); + + /* + * Goldfish TTY device on Ranchu emulator (qemu2) + * will use DMA for read/write IO operations. + */ + if (qtty->version > 0) { + /* + * Initialize dma_mask to 32-bits. + */ + if (!pdev->dev.dma_mask) + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + ret = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (ret) { + dev_err(&pdev->dev, "No suitable DMA available.\n"); + goto err_dec_line_count; + } + } + + writel(GOLDFISH_TTY_CMD_INT_DISABLE, base + GOLDFISH_TTY_REG_CMD); + + ret = request_irq(irq, goldfish_tty_interrupt, IRQF_SHARED, + "goldfish_tty", qtty); + if (ret) { + pr_err("goldfish_tty: No IRQ available!\n"); + goto err_dec_line_count; + } + + ttydev = tty_port_register_device(&qtty->port, goldfish_tty_driver, + line, &pdev->dev); + if (IS_ERR(ttydev)) { + ret = PTR_ERR(ttydev); + goto err_tty_register_device_failed; + } + + strcpy(qtty->console.name, "ttyGF"); + qtty->console.write = goldfish_tty_console_write; + qtty->console.device = goldfish_tty_console_device; + qtty->console.setup = goldfish_tty_console_setup; + qtty->console.flags = CON_PRINTBUFFER; + qtty->console.index = line; + register_console(&qtty->console); + platform_set_drvdata(pdev, qtty); + + mutex_unlock(&goldfish_tty_lock); + return 0; + +err_tty_register_device_failed: + free_irq(irq, qtty); +err_dec_line_count: + tty_port_destroy(&qtty->port); + goldfish_tty_current_line_count--; + if (goldfish_tty_current_line_count == 0) + goldfish_tty_delete_driver(); +err_unlock: + mutex_unlock(&goldfish_tty_lock); +err_unmap: + iounmap(base); + return ret; +} + +static int goldfish_tty_remove(struct platform_device *pdev) +{ + struct goldfish_tty *qtty = platform_get_drvdata(pdev); + + mutex_lock(&goldfish_tty_lock); + + unregister_console(&qtty->console); + tty_unregister_device(goldfish_tty_driver, qtty->console.index); + iounmap(qtty->base); + qtty->base = NULL; + free_irq(qtty->irq, qtty); + tty_port_destroy(&qtty->port); + goldfish_tty_current_line_count--; + if (goldfish_tty_current_line_count == 0) + goldfish_tty_delete_driver(); + mutex_unlock(&goldfish_tty_lock); + return 0; +} + +#ifdef CONFIG_GOLDFISH_TTY_EARLY_CONSOLE +static void gf_early_console_putchar(struct uart_port *port, int ch) +{ + __raw_writel(ch, port->membase); +} + +static void gf_early_write(struct console *con, const char *s, unsigned int n) +{ + struct earlycon_device *dev = con->data; + + uart_console_write(&dev->port, s, n, gf_early_console_putchar); +} + +static int __init gf_earlycon_setup(struct earlycon_device *device, + const char *opt) +{ + if (!device->port.membase) + return -ENODEV; + + device->con->write = gf_early_write; + return 0; +} + +OF_EARLYCON_DECLARE(early_gf_tty, "google,goldfish-tty", gf_earlycon_setup); +#endif + +static const struct of_device_id goldfish_tty_of_match[] = { + { .compatible = "google,goldfish-tty", }, + {}, +}; + +MODULE_DEVICE_TABLE(of, goldfish_tty_of_match); + +static struct platform_driver goldfish_tty_platform_driver = { + .probe = goldfish_tty_probe, + .remove = goldfish_tty_remove, + .driver = { + .name = "goldfish_tty", + .of_match_table = goldfish_tty_of_match, + } +}; + +module_platform_driver(goldfish_tty_platform_driver); + +MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig new file mode 100644 index 000000000..8d60e0ff6 --- /dev/null +++ b/drivers/tty/hvc/Kconfig @@ -0,0 +1,115 @@ +# SPDX-License-Identifier: GPL-2.0 + +config HVC_DRIVER + bool + help + Generic "hypervisor virtual console" infrastructure for various + hypervisors (pSeries, iSeries, Xen). + It will automatically be selected if one of the back-end console drivers + is selected. + +config HVC_IRQ + bool + +config HVC_CONSOLE + bool "pSeries Hypervisor Virtual Console support" + depends on PPC_PSERIES + select HVC_DRIVER + select HVC_IRQ + help + pSeries machines when partitioned support a hypervisor virtual + console. This driver allows each pSeries partition to have a console + which is accessed via the HMC. + +config HVC_OLD_HVSI + bool "Old driver for pSeries serial port (/dev/hvsi*)" + depends on HVC_CONSOLE + +config HVC_OPAL + bool "OPAL Console support" + depends on PPC_POWERNV + select HVC_DRIVER + select HVC_IRQ + default y + help + PowerNV machines running under OPAL need that driver to get a console + +config HVC_RTAS + bool "IBM RTAS Console support" + depends on PPC_RTAS + select HVC_DRIVER + help + IBM Console device driver which makes use of RTAS + +config HVC_IUCV + bool "z/VM IUCV Hypervisor console support (VM only)" + depends on S390 && NET + select HVC_DRIVER + select IUCV + default y + help + This driver provides a Hypervisor console (HVC) back-end to access + a Linux (console) terminal via a z/VM IUCV communication path. + +config HVC_XEN + bool "Xen Hypervisor Console support" + depends on XEN + select HVC_DRIVER + select HVC_IRQ + default y + help + Xen virtual console device driver + +config HVC_XEN_FRONTEND + bool "Xen Hypervisor Multiple Consoles support" + depends on HVC_XEN + select XEN_XENBUS_FRONTEND + default y + help + Xen driver for secondary virtual consoles + +config HVC_UDBG + bool "udbg based fake hypervisor console" + depends on PPC + select HVC_DRIVER + help + This is meant to be used during HW bring up or debugging when + no other console mechanism exist but udbg, to get you a quick + console for userspace. Do NOT enable in production kernels. + +config HVC_DCC + bool "ARM JTAG DCC console" + depends on ARM || ARM64 + select HVC_DRIVER + select SERIAL_CORE_CONSOLE + help + This console uses the JTAG DCC on ARM to create a console under the HVC + driver. This console is used through a JTAG only on ARM. If you don't have + a JTAG then you probably don't want this option. + +config HVC_RISCV_SBI + bool "RISC-V SBI console support" + depends on RISCV_SBI_V01 + select HVC_DRIVER + help + This enables support for console output via RISC-V SBI calls, which + is normally used only during boot to output printk. + + If you don't know what do to here, say Y. + +config HVCS + tristate "IBM Hypervisor Virtual Console Server support" + depends on PPC_PSERIES && HVC_CONSOLE + help + Partitionable IBM Power5 ppc64 machines allow hosting of + firmware virtual consoles from one Linux partition by + another Linux partition. This driver allows console data + from Linux partitions to be accessed through TTY device + interfaces in the device tree of a Linux partition running + this driver. + + To compile this driver as a module, choose M here: the + module will be called hvcs. Additionally, this module + will depend on arch specific APIs exported from hvcserver.ko + which will also be compiled when this driver is built as a + module. diff --git a/drivers/tty/hvc/Makefile b/drivers/tty/hvc/Makefile new file mode 100644 index 000000000..98880e357 --- /dev/null +++ b/drivers/tty/hvc/Makefile @@ -0,0 +1,13 @@ +# SPDX-License-Identifier: GPL-2.0 +obj-$(CONFIG_HVC_CONSOLE) += hvc_vio.o hvsi_lib.o +obj-$(CONFIG_HVC_OPAL) += hvc_opal.o hvsi_lib.o +obj-$(CONFIG_HVC_OLD_HVSI) += hvsi.o +obj-$(CONFIG_HVC_RTAS) += hvc_rtas.o +obj-$(CONFIG_HVC_DCC) += hvc_dcc.o +obj-$(CONFIG_HVC_DRIVER) += hvc_console.o +obj-$(CONFIG_HVC_IRQ) += hvc_irq.o +obj-$(CONFIG_HVC_XEN) += hvc_xen.o +obj-$(CONFIG_HVC_IUCV) += hvc_iucv.o +obj-$(CONFIG_HVC_UDBG) += hvc_udbg.o +obj-$(CONFIG_HVC_RISCV_SBI) += hvc_riscv_sbi.o +obj-$(CONFIG_HVCS) += hvcs.o diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c new file mode 100644 index 000000000..cdcc64ea2 --- /dev/null +++ b/drivers/tty/hvc/hvc_console.c @@ -0,0 +1,1069 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2001 Anton Blanchard , IBM + * Copyright (C) 2001 Paul Mackerras , IBM + * Copyright (C) 2004 Benjamin Herrenschmidt , IBM Corp. + * Copyright (C) 2004 IBM Corporation + * + * Additional Author(s): + * Ryan S. Arnold + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "hvc_console.h" + +#define HVC_MAJOR 229 +#define HVC_MINOR 0 + +/* + * Wait this long per iteration while trying to push buffered data to the + * hypervisor before allowing the tty to complete a close operation. + */ +#define HVC_CLOSE_WAIT (HZ/100) /* 1/10 of a second */ + +/* + * These sizes are most efficient for vio, because they are the + * native transfer size. We could make them selectable in the + * future to better deal with backends that want other buffer sizes. + */ +#define N_OUTBUF 16 +#define N_INBUF 16 + +#define __ALIGNED__ __attribute__((__aligned__(sizeof(long)))) + +static struct tty_driver *hvc_driver; +static struct task_struct *hvc_task; + +/* Picks up late kicks after list walk but before schedule() */ +static int hvc_kicked; + +/* hvc_init is triggered from hvc_alloc, i.e. only when actually used */ +static atomic_t hvc_needs_init __read_mostly = ATOMIC_INIT(-1); + +static int hvc_init(void); + +#ifdef CONFIG_MAGIC_SYSRQ +static int sysrq_pressed; +#endif + +/* dynamic list of hvc_struct instances */ +static LIST_HEAD(hvc_structs); + +/* + * Protect the list of hvc_struct instances from inserts and removals during + * list traversal. + */ +static DEFINE_MUTEX(hvc_structs_mutex); + +/* + * This value is used to assign a tty->index value to a hvc_struct based + * upon order of exposure via hvc_probe(), when we can not match it to + * a console candidate registered with hvc_instantiate(). + */ +static int last_hvc = -1; + +/* + * Do not call this function with either the hvc_structs_mutex or the hvc_struct + * lock held. If successful, this function increments the kref reference + * count against the target hvc_struct so it should be released when finished. + */ +static struct hvc_struct *hvc_get_by_index(int index) +{ + struct hvc_struct *hp; + unsigned long flags; + + mutex_lock(&hvc_structs_mutex); + + list_for_each_entry(hp, &hvc_structs, next) { + spin_lock_irqsave(&hp->lock, flags); + if (hp->index == index) { + tty_port_get(&hp->port); + spin_unlock_irqrestore(&hp->lock, flags); + mutex_unlock(&hvc_structs_mutex); + return hp; + } + spin_unlock_irqrestore(&hp->lock, flags); + } + hp = NULL; + mutex_unlock(&hvc_structs_mutex); + + return hp; +} + +static int __hvc_flush(const struct hv_ops *ops, uint32_t vtermno, bool wait) +{ + if (wait) + might_sleep(); + + if (ops->flush) + return ops->flush(vtermno, wait); + return 0; +} + +static int hvc_console_flush(const struct hv_ops *ops, uint32_t vtermno) +{ + return __hvc_flush(ops, vtermno, false); +} + +/* + * Wait for the console to flush before writing more to it. This sleeps. + */ +static int hvc_flush(struct hvc_struct *hp) +{ + return __hvc_flush(hp->ops, hp->vtermno, true); +} + +/* + * Initial console vtermnos for console API usage prior to full console + * initialization. Any vty adapter outside this range will not have usable + * console interfaces but can still be used as a tty device. This has to be + * static because kmalloc will not work during early console init. + */ +static const struct hv_ops *cons_ops[MAX_NR_HVC_CONSOLES]; +static uint32_t vtermnos[MAX_NR_HVC_CONSOLES] = + {[0 ... MAX_NR_HVC_CONSOLES - 1] = -1}; + +/* + * Console APIs, NOT TTY. These APIs are available immediately when + * hvc_console_setup() finds adapters. + */ + +static void hvc_console_print(struct console *co, const char *b, + unsigned count) +{ + char c[N_OUTBUF] __ALIGNED__; + unsigned i = 0, n = 0; + int r, donecr = 0, index = co->index; + + /* Console access attempt outside of acceptable console range. */ + if (index >= MAX_NR_HVC_CONSOLES) + return; + + /* This console adapter was removed so it is not usable. */ + if (vtermnos[index] == -1) + return; + + while (count > 0 || i > 0) { + if (count > 0 && i < sizeof(c)) { + if (b[n] == '\n' && !donecr) { + c[i++] = '\r'; + donecr = 1; + } else { + c[i++] = b[n++]; + donecr = 0; + --count; + } + } else { + r = cons_ops[index]->put_chars(vtermnos[index], c, i); + if (r <= 0) { + /* throw away characters on error + * but spin in case of -EAGAIN */ + if (r != -EAGAIN) { + i = 0; + } else { + hvc_console_flush(cons_ops[index], + vtermnos[index]); + } + } else if (r > 0) { + i -= r; + if (i > 0) + memmove(c, c+r, i); + } + } + } + hvc_console_flush(cons_ops[index], vtermnos[index]); +} + +static struct tty_driver *hvc_console_device(struct console *c, int *index) +{ + if (vtermnos[c->index] == -1) + return NULL; + + *index = c->index; + return hvc_driver; +} + +static int hvc_console_setup(struct console *co, char *options) +{ + if (co->index < 0 || co->index >= MAX_NR_HVC_CONSOLES) + return -ENODEV; + + if (vtermnos[co->index] == -1) + return -ENODEV; + + return 0; +} + +static struct console hvc_console = { + .name = "hvc", + .write = hvc_console_print, + .device = hvc_console_device, + .setup = hvc_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + +/* + * Early console initialization. Precedes driver initialization. + * + * (1) we are first, and the user specified another driver + * -- index will remain -1 + * (2) we are first and the user specified no driver + * -- index will be set to 0, then we will fail setup. + * (3) we are first and the user specified our driver + * -- index will be set to user specified driver, and we will fail + * (4) we are after driver, and this initcall will register us + * -- if the user didn't specify a driver then the console will match + * + * Note that for cases 2 and 3, we will match later when the io driver + * calls hvc_instantiate() and call register again. + */ +static int __init hvc_console_init(void) +{ + register_console(&hvc_console); + return 0; +} +console_initcall(hvc_console_init); + +/* callback when the kboject ref count reaches zero. */ +static void hvc_port_destruct(struct tty_port *port) +{ + struct hvc_struct *hp = container_of(port, struct hvc_struct, port); + unsigned long flags; + + mutex_lock(&hvc_structs_mutex); + + spin_lock_irqsave(&hp->lock, flags); + list_del(&(hp->next)); + spin_unlock_irqrestore(&hp->lock, flags); + + mutex_unlock(&hvc_structs_mutex); + + kfree(hp); +} + +static void hvc_check_console(int index) +{ + /* Already enabled, bail out */ + if (hvc_console.flags & CON_ENABLED) + return; + + /* If this index is what the user requested, then register + * now (setup won't fail at this point). It's ok to just + * call register again if previously .setup failed. + */ + if (index == hvc_console.index) + register_console(&hvc_console); +} + +/* + * hvc_instantiate() is an early console discovery method which locates + * consoles * prior to the vio subsystem discovering them. Hotplugged + * vty adapters do NOT get an hvc_instantiate() callback since they + * appear after early console init. + */ +int hvc_instantiate(uint32_t vtermno, int index, const struct hv_ops *ops) +{ + struct hvc_struct *hp; + + if (index < 0 || index >= MAX_NR_HVC_CONSOLES) + return -1; + + if (vtermnos[index] != -1) + return -1; + + /* make sure no no tty has been registered in this index */ + hp = hvc_get_by_index(index); + if (hp) { + tty_port_put(&hp->port); + return -1; + } + + vtermnos[index] = vtermno; + cons_ops[index] = ops; + + /* check if we need to re-register the kernel console */ + hvc_check_console(index); + + return 0; +} +EXPORT_SYMBOL_GPL(hvc_instantiate); + +/* Wake the sleeping khvcd */ +void hvc_kick(void) +{ + hvc_kicked = 1; + wake_up_process(hvc_task); +} +EXPORT_SYMBOL_GPL(hvc_kick); + +static void hvc_unthrottle(struct tty_struct *tty) +{ + hvc_kick(); +} + +static int hvc_install(struct tty_driver *driver, struct tty_struct *tty) +{ + struct hvc_struct *hp; + int rc; + + /* Auto increments kref reference if found. */ + hp = hvc_get_by_index(tty->index); + if (!hp) + return -ENODEV; + + tty->driver_data = hp; + + rc = tty_port_install(&hp->port, driver, tty); + if (rc) + tty_port_put(&hp->port); + return rc; +} + +/* + * The TTY interface won't be used until after the vio layer has exposed the vty + * adapter to the kernel. + */ +static int hvc_open(struct tty_struct *tty, struct file * filp) +{ + struct hvc_struct *hp = tty->driver_data; + unsigned long flags; + int rc = 0; + + spin_lock_irqsave(&hp->port.lock, flags); + /* Check and then increment for fast path open. */ + if (hp->port.count++ > 0) { + spin_unlock_irqrestore(&hp->port.lock, flags); + hvc_kick(); + return 0; + } /* else count == 0 */ + spin_unlock_irqrestore(&hp->port.lock, flags); + + tty_port_tty_set(&hp->port, tty); + + if (hp->ops->notifier_add) + rc = hp->ops->notifier_add(hp, hp->data); + + /* + * If the notifier fails we return an error. The tty layer + * will call hvc_close() after a failed open but we don't want to clean + * up there so we'll clean up here and clear out the previously set + * tty fields and return the kref reference. + */ + if (rc) { + printk(KERN_ERR "hvc_open: request_irq failed with rc %d.\n", rc); + } else { + /* We are ready... raise DTR/RTS */ + if (C_BAUD(tty)) + if (hp->ops->dtr_rts) + hp->ops->dtr_rts(hp, 1); + tty_port_set_initialized(&hp->port, true); + } + + /* Force wakeup of the polling thread */ + hvc_kick(); + + return rc; +} + +static void hvc_close(struct tty_struct *tty, struct file * filp) +{ + struct hvc_struct *hp = tty->driver_data; + unsigned long flags; + + if (tty_hung_up_p(filp)) + return; + + spin_lock_irqsave(&hp->port.lock, flags); + + if (--hp->port.count == 0) { + spin_unlock_irqrestore(&hp->port.lock, flags); + /* We are done with the tty pointer now. */ + tty_port_tty_set(&hp->port, NULL); + + if (!tty_port_initialized(&hp->port)) + return; + + if (C_HUPCL(tty)) + if (hp->ops->dtr_rts) + hp->ops->dtr_rts(hp, 0); + + if (hp->ops->notifier_del) + hp->ops->notifier_del(hp, hp->data); + + /* cancel pending tty resize work */ + cancel_work_sync(&hp->tty_resize); + + /* + * Chain calls chars_in_buffer() and returns immediately if + * there is no buffered data otherwise sleeps on a wait queue + * waking periodically to check chars_in_buffer(). + */ + tty_wait_until_sent(tty, HVC_CLOSE_WAIT); + tty_port_set_initialized(&hp->port, false); + } else { + if (hp->port.count < 0) + printk(KERN_ERR "hvc_close %X: oops, count is %d\n", + hp->vtermno, hp->port.count); + spin_unlock_irqrestore(&hp->port.lock, flags); + } +} + +static void hvc_cleanup(struct tty_struct *tty) +{ + struct hvc_struct *hp = tty->driver_data; + + tty_port_put(&hp->port); +} + +static void hvc_hangup(struct tty_struct *tty) +{ + struct hvc_struct *hp = tty->driver_data; + unsigned long flags; + + if (!hp) + return; + + /* cancel pending tty resize work */ + cancel_work_sync(&hp->tty_resize); + + spin_lock_irqsave(&hp->port.lock, flags); + + /* + * The N_TTY line discipline has problems such that in a close vs + * open->hangup case this can be called after the final close so prevent + * that from happening for now. + */ + if (hp->port.count <= 0) { + spin_unlock_irqrestore(&hp->port.lock, flags); + return; + } + + hp->port.count = 0; + spin_unlock_irqrestore(&hp->port.lock, flags); + tty_port_tty_set(&hp->port, NULL); + + hp->n_outbuf = 0; + + if (hp->ops->notifier_hangup) + hp->ops->notifier_hangup(hp, hp->data); +} + +/* + * Push buffered characters whether they were just recently buffered or waiting + * on a blocked hypervisor. Call this function with hp->lock held. + */ +static int hvc_push(struct hvc_struct *hp) +{ + int n; + + n = hp->ops->put_chars(hp->vtermno, hp->outbuf, hp->n_outbuf); + if (n <= 0) { + if (n == 0 || n == -EAGAIN) { + hp->do_wakeup = 1; + return 0; + } + /* throw away output on error; this happens when + there is no session connected to the vterm. */ + hp->n_outbuf = 0; + } else + hp->n_outbuf -= n; + if (hp->n_outbuf > 0) + memmove(hp->outbuf, hp->outbuf + n, hp->n_outbuf); + else + hp->do_wakeup = 1; + + return n; +} + +static int hvc_write(struct tty_struct *tty, const unsigned char *buf, int count) +{ + struct hvc_struct *hp = tty->driver_data; + unsigned long flags; + int rsize, written = 0; + + /* This write was probably executed during a tty close. */ + if (!hp) + return -EPIPE; + + /* FIXME what's this (unprotected) check for? */ + if (hp->port.count <= 0) + return -EIO; + + while (count > 0) { + int ret = 0; + + spin_lock_irqsave(&hp->lock, flags); + + rsize = hp->outbuf_size - hp->n_outbuf; + + if (rsize) { + if (rsize > count) + rsize = count; + memcpy(hp->outbuf + hp->n_outbuf, buf, rsize); + count -= rsize; + buf += rsize; + hp->n_outbuf += rsize; + written += rsize; + } + + if (hp->n_outbuf > 0) + ret = hvc_push(hp); + + spin_unlock_irqrestore(&hp->lock, flags); + + if (!ret) + break; + + if (count) { + if (hp->n_outbuf > 0) + hvc_flush(hp); + cond_resched(); + } + } + + /* + * Racy, but harmless, kick thread if there is still pending data. + */ + if (hp->n_outbuf) + hvc_kick(); + + return written; +} + +/** + * hvc_set_winsz() - Resize the hvc tty terminal window. + * @work: work structure. + * + * The routine shall not be called within an atomic context because it + * might sleep. + * + * Locking: hp->lock + */ +static void hvc_set_winsz(struct work_struct *work) +{ + struct hvc_struct *hp; + unsigned long hvc_flags; + struct tty_struct *tty; + struct winsize ws; + + hp = container_of(work, struct hvc_struct, tty_resize); + + tty = tty_port_tty_get(&hp->port); + if (!tty) + return; + + spin_lock_irqsave(&hp->lock, hvc_flags); + ws = hp->ws; + spin_unlock_irqrestore(&hp->lock, hvc_flags); + + tty_do_resize(tty, &ws); + tty_kref_put(tty); +} + +/* + * This is actually a contract between the driver and the tty layer outlining + * how much write room the driver can guarantee will be sent OR BUFFERED. This + * driver MUST honor the return value. + */ +static int hvc_write_room(struct tty_struct *tty) +{ + struct hvc_struct *hp = tty->driver_data; + + if (!hp) + return 0; + + return hp->outbuf_size - hp->n_outbuf; +} + +static int hvc_chars_in_buffer(struct tty_struct *tty) +{ + struct hvc_struct *hp = tty->driver_data; + + if (!hp) + return 0; + return hp->n_outbuf; +} + +/* + * timeout will vary between the MIN and MAX values defined here. By default + * and during console activity we will use a default MIN_TIMEOUT of 10. When + * the console is idle, we increase the timeout value on each pass through + * msleep until we reach the max. This may be noticeable as a brief (average + * one second) delay on the console before the console responds to input when + * there has been no input for some time. + */ +#define MIN_TIMEOUT (10) +#define MAX_TIMEOUT (2000) +static u32 timeout = MIN_TIMEOUT; + +/* + * Maximum number of bytes to get from the console driver if hvc_poll is + * called from driver (and can't sleep). Any more than this and we break + * and start polling with khvcd. This value was derived from from an OpenBMC + * console with the OPAL driver that results in about 0.25ms interrupts off + * latency. + */ +#define HVC_ATOMIC_READ_MAX 128 + +#define HVC_POLL_READ 0x00000001 +#define HVC_POLL_WRITE 0x00000002 + +static int __hvc_poll(struct hvc_struct *hp, bool may_sleep) +{ + struct tty_struct *tty; + int i, n, count, poll_mask = 0; + char buf[N_INBUF] __ALIGNED__; + unsigned long flags; + int read_total = 0; + int written_total = 0; + + spin_lock_irqsave(&hp->lock, flags); + + /* Push pending writes */ + if (hp->n_outbuf > 0) + written_total = hvc_push(hp); + + /* Reschedule us if still some write pending */ + if (hp->n_outbuf > 0) { + poll_mask |= HVC_POLL_WRITE; + /* If hvc_push() was not able to write, sleep a few msecs */ + timeout = (written_total) ? 0 : MIN_TIMEOUT; + } + + if (may_sleep) { + spin_unlock_irqrestore(&hp->lock, flags); + cond_resched(); + spin_lock_irqsave(&hp->lock, flags); + } + + /* No tty attached, just skip */ + tty = tty_port_tty_get(&hp->port); + if (tty == NULL) + goto bail; + + /* Now check if we can get data (are we throttled ?) */ + if (tty_throttled(tty)) + goto out; + + /* If we aren't notifier driven and aren't throttled, we always + * request a reschedule + */ + if (!hp->irq_requested) + poll_mask |= HVC_POLL_READ; + + read_again: + /* Read data if any */ + count = tty_buffer_request_room(&hp->port, N_INBUF); + + /* If flip is full, just reschedule a later read */ + if (count == 0) { + poll_mask |= HVC_POLL_READ; + goto out; + } + + n = hp->ops->get_chars(hp->vtermno, buf, count); + if (n <= 0) { + /* Hangup the tty when disconnected from host */ + if (n == -EPIPE) { + spin_unlock_irqrestore(&hp->lock, flags); + tty_hangup(tty); + spin_lock_irqsave(&hp->lock, flags); + } else if ( n == -EAGAIN ) { + /* + * Some back-ends can only ensure a certain min + * num of bytes read, which may be > 'count'. + * Let the tty clear the flip buff to make room. + */ + poll_mask |= HVC_POLL_READ; + } + goto out; + } + + for (i = 0; i < n; ++i) { +#ifdef CONFIG_MAGIC_SYSRQ + if (hp->index == hvc_console.index) { + /* Handle the SysRq Hack */ + /* XXX should support a sequence */ + if (buf[i] == '\x0f') { /* ^O */ + /* if ^O is pressed again, reset + * sysrq_pressed and flip ^O char */ + sysrq_pressed = !sysrq_pressed; + if (sysrq_pressed) + continue; + } else if (sysrq_pressed) { + handle_sysrq(buf[i]); + sysrq_pressed = 0; + continue; + } + } +#endif /* CONFIG_MAGIC_SYSRQ */ + tty_insert_flip_char(&hp->port, buf[i], 0); + } + read_total += n; + + if (may_sleep) { + /* Keep going until the flip is full */ + spin_unlock_irqrestore(&hp->lock, flags); + cond_resched(); + spin_lock_irqsave(&hp->lock, flags); + goto read_again; + } else if (read_total < HVC_ATOMIC_READ_MAX) { + /* Break and defer if it's a large read in atomic */ + goto read_again; + } + + /* + * Latency break, schedule another poll immediately. + */ + poll_mask |= HVC_POLL_READ; + + out: + /* Wakeup write queue if necessary */ + if (hp->do_wakeup) { + hp->do_wakeup = 0; + tty_wakeup(tty); + } + bail: + spin_unlock_irqrestore(&hp->lock, flags); + + if (read_total) { + /* Activity is occurring, so reset the polling backoff value to + a minimum for performance. */ + timeout = MIN_TIMEOUT; + + tty_flip_buffer_push(&hp->port); + } + tty_kref_put(tty); + + return poll_mask; +} + +int hvc_poll(struct hvc_struct *hp) +{ + return __hvc_poll(hp, false); +} +EXPORT_SYMBOL_GPL(hvc_poll); + +/** + * __hvc_resize() - Update terminal window size information. + * @hp: HVC console pointer + * @ws: Terminal window size structure + * + * Stores the specified window size information in the hvc structure of @hp. + * The function schedule the tty resize update. + * + * Locking: Locking free; the function MUST be called holding hp->lock + */ +void __hvc_resize(struct hvc_struct *hp, struct winsize ws) +{ + hp->ws = ws; + schedule_work(&hp->tty_resize); +} +EXPORT_SYMBOL_GPL(__hvc_resize); + +/* + * This kthread is either polling or interrupt driven. This is determined by + * calling hvc_poll() who determines whether a console adapter support + * interrupts. + */ +static int khvcd(void *unused) +{ + int poll_mask; + struct hvc_struct *hp; + + set_freezable(); + do { + poll_mask = 0; + hvc_kicked = 0; + try_to_freeze(); + wmb(); + if (!cpus_are_in_xmon()) { + mutex_lock(&hvc_structs_mutex); + list_for_each_entry(hp, &hvc_structs, next) { + poll_mask |= __hvc_poll(hp, true); + cond_resched(); + } + mutex_unlock(&hvc_structs_mutex); + } else + poll_mask |= HVC_POLL_READ; + if (hvc_kicked) + continue; + set_current_state(TASK_INTERRUPTIBLE); + if (!hvc_kicked) { + if (poll_mask == 0) + schedule(); + else { + unsigned long j_timeout; + + if (timeout < MAX_TIMEOUT) + timeout += (timeout >> 6) + 1; + + /* + * We don't use msleep_interruptible otherwise + * "kick" will fail to wake us up + */ + j_timeout = msecs_to_jiffies(timeout) + 1; + schedule_timeout_interruptible(j_timeout); + } + } + __set_current_state(TASK_RUNNING); + } while (!kthread_should_stop()); + + return 0; +} + +static int hvc_tiocmget(struct tty_struct *tty) +{ + struct hvc_struct *hp = tty->driver_data; + + if (!hp || !hp->ops->tiocmget) + return -EINVAL; + return hp->ops->tiocmget(hp); +} + +static int hvc_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct hvc_struct *hp = tty->driver_data; + + if (!hp || !hp->ops->tiocmset) + return -EINVAL; + return hp->ops->tiocmset(hp, set, clear); +} + +#ifdef CONFIG_CONSOLE_POLL +static int hvc_poll_init(struct tty_driver *driver, int line, char *options) +{ + return 0; +} + +static int hvc_poll_get_char(struct tty_driver *driver, int line) +{ + struct tty_struct *tty = driver->ttys[0]; + struct hvc_struct *hp = tty->driver_data; + int n; + char ch; + + n = hp->ops->get_chars(hp->vtermno, &ch, 1); + + if (n <= 0) + return NO_POLL_CHAR; + + return ch; +} + +static void hvc_poll_put_char(struct tty_driver *driver, int line, char ch) +{ + struct tty_struct *tty = driver->ttys[0]; + struct hvc_struct *hp = tty->driver_data; + int n; + + do { + n = hp->ops->put_chars(hp->vtermno, &ch, 1); + } while (n <= 0); +} +#endif + +static const struct tty_operations hvc_ops = { + .install = hvc_install, + .open = hvc_open, + .close = hvc_close, + .cleanup = hvc_cleanup, + .write = hvc_write, + .hangup = hvc_hangup, + .unthrottle = hvc_unthrottle, + .write_room = hvc_write_room, + .chars_in_buffer = hvc_chars_in_buffer, + .tiocmget = hvc_tiocmget, + .tiocmset = hvc_tiocmset, +#ifdef CONFIG_CONSOLE_POLL + .poll_init = hvc_poll_init, + .poll_get_char = hvc_poll_get_char, + .poll_put_char = hvc_poll_put_char, +#endif +}; + +static const struct tty_port_operations hvc_port_ops = { + .destruct = hvc_port_destruct, +}; + +struct hvc_struct *hvc_alloc(uint32_t vtermno, int data, + const struct hv_ops *ops, + int outbuf_size) +{ + struct hvc_struct *hp; + int i; + + /* We wait until a driver actually comes along */ + if (atomic_inc_not_zero(&hvc_needs_init)) { + int err = hvc_init(); + if (err) + return ERR_PTR(err); + } + + hp = kzalloc(ALIGN(sizeof(*hp), sizeof(long)) + outbuf_size, + GFP_KERNEL); + if (!hp) + return ERR_PTR(-ENOMEM); + + hp->vtermno = vtermno; + hp->data = data; + hp->ops = ops; + hp->outbuf_size = outbuf_size; + hp->outbuf = &((char *)hp)[ALIGN(sizeof(*hp), sizeof(long))]; + + tty_port_init(&hp->port); + hp->port.ops = &hvc_port_ops; + + INIT_WORK(&hp->tty_resize, hvc_set_winsz); + spin_lock_init(&hp->lock); + mutex_lock(&hvc_structs_mutex); + + /* + * find index to use: + * see if this vterm id matches one registered for console. + */ + for (i=0; i < MAX_NR_HVC_CONSOLES; i++) + if (vtermnos[i] == hp->vtermno && + cons_ops[i] == hp->ops) + break; + + if (i >= MAX_NR_HVC_CONSOLES) { + + /* find 'empty' slot for console */ + for (i = 0; i < MAX_NR_HVC_CONSOLES && vtermnos[i] != -1; i++) { + } + + /* no matching slot, just use a counter */ + if (i == MAX_NR_HVC_CONSOLES) + i = ++last_hvc + MAX_NR_HVC_CONSOLES; + } + + hp->index = i; + if (i < MAX_NR_HVC_CONSOLES) { + cons_ops[i] = ops; + vtermnos[i] = vtermno; + } + + list_add_tail(&(hp->next), &hvc_structs); + mutex_unlock(&hvc_structs_mutex); + + /* check if we need to re-register the kernel console */ + hvc_check_console(i); + + return hp; +} +EXPORT_SYMBOL_GPL(hvc_alloc); + +int hvc_remove(struct hvc_struct *hp) +{ + unsigned long flags; + struct tty_struct *tty; + + tty = tty_port_tty_get(&hp->port); + + console_lock(); + spin_lock_irqsave(&hp->lock, flags); + if (hp->index < MAX_NR_HVC_CONSOLES) { + vtermnos[hp->index] = -1; + cons_ops[hp->index] = NULL; + } + + /* Don't whack hp->irq because tty_hangup() will need to free the irq. */ + + spin_unlock_irqrestore(&hp->lock, flags); + console_unlock(); + + /* + * We 'put' the instance that was grabbed when the kref instance + * was initialized using kref_init(). Let the last holder of this + * kref cause it to be removed, which will probably be the tty_vhangup + * below. + */ + tty_port_put(&hp->port); + + /* + * This function call will auto chain call hvc_hangup. + */ + if (tty) { + tty_vhangup(tty); + tty_kref_put(tty); + } + return 0; +} +EXPORT_SYMBOL_GPL(hvc_remove); + +/* Driver initialization: called as soon as someone uses hvc_alloc(). */ +static int hvc_init(void) +{ + struct tty_driver *drv; + int err; + + /* We need more than hvc_count adapters due to hotplug additions. */ + drv = alloc_tty_driver(HVC_ALLOC_TTY_ADAPTERS); + if (!drv) { + err = -ENOMEM; + goto out; + } + + drv->driver_name = "hvc"; + drv->name = "hvc"; + drv->major = HVC_MAJOR; + drv->minor_start = HVC_MINOR; + drv->type = TTY_DRIVER_TYPE_SYSTEM; + drv->init_termios = tty_std_termios; + drv->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_RESET_TERMIOS; + tty_set_operations(drv, &hvc_ops); + + /* Always start the kthread because there can be hotplug vty adapters + * added later. */ + hvc_task = kthread_run(khvcd, NULL, "khvcd"); + if (IS_ERR(hvc_task)) { + printk(KERN_ERR "Couldn't create kthread for console.\n"); + err = PTR_ERR(hvc_task); + goto put_tty; + } + + err = tty_register_driver(drv); + if (err) { + printk(KERN_ERR "Couldn't register hvc console driver\n"); + goto stop_thread; + } + + /* + * Make sure tty is fully registered before allowing it to be + * found by hvc_console_device. + */ + smp_mb(); + hvc_driver = drv; + return 0; + +stop_thread: + kthread_stop(hvc_task); + hvc_task = NULL; +put_tty: + put_tty_driver(drv); +out: + return err; +} diff --git a/drivers/tty/hvc/hvc_console.h b/drivers/tty/hvc/hvc_console.h new file mode 100644 index 000000000..18d005814 --- /dev/null +++ b/drivers/tty/hvc/hvc_console.h @@ -0,0 +1,113 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * hvc_console.h + * Copyright (C) 2005 IBM Corporation + * + * Author(s): + * Ryan S. Arnold + * + * hvc_console header information: + * moved here from arch/powerpc/include/asm/hvconsole.h + * and drivers/char/hvc_console.c + */ + +#ifndef HVC_CONSOLE_H +#define HVC_CONSOLE_H +#include +#include +#include + +/* + * This is the max number of console adapters that can/will be found as + * console devices on first stage console init. Any number beyond this range + * can't be used as a console device but is still a valid tty device. + */ +#define MAX_NR_HVC_CONSOLES 16 + +/* + * The Linux TTY code does not support dynamic addition of tty derived devices + * so we need to know how many tty devices we might need when space is allocated + * for the tty device. Since this driver supports hotplug of vty adapters we + * need to make sure we have enough allocated. + */ +#define HVC_ALLOC_TTY_ADAPTERS 8 + +struct hvc_struct { + struct tty_port port; + spinlock_t lock; + int index; + int do_wakeup; + char *outbuf; + int outbuf_size; + int n_outbuf; + uint32_t vtermno; + const struct hv_ops *ops; + int irq_requested; + int data; + struct winsize ws; + struct work_struct tty_resize; + struct list_head next; + unsigned long flags; +}; + +/* implemented by a low level driver */ +struct hv_ops { + int (*get_chars)(uint32_t vtermno, char *buf, int count); + int (*put_chars)(uint32_t vtermno, const char *buf, int count); + int (*flush)(uint32_t vtermno, bool wait); + + /* Callbacks for notification. Called in open, close and hangup */ + int (*notifier_add)(struct hvc_struct *hp, int irq); + void (*notifier_del)(struct hvc_struct *hp, int irq); + void (*notifier_hangup)(struct hvc_struct *hp, int irq); + + /* tiocmget/set implementation */ + int (*tiocmget)(struct hvc_struct *hp); + int (*tiocmset)(struct hvc_struct *hp, unsigned int set, unsigned int clear); + + /* Callbacks to handle tty ports */ + void (*dtr_rts)(struct hvc_struct *hp, int raise); +}; + +/* Register a vterm and a slot index for use as a console (console_init) */ +extern int hvc_instantiate(uint32_t vtermno, int index, + const struct hv_ops *ops); + +/* register a vterm for hvc tty operation (module_init or hotplug add) */ +extern struct hvc_struct * hvc_alloc(uint32_t vtermno, int data, + const struct hv_ops *ops, int outbuf_size); +/* remove a vterm from hvc tty operation (module_exit or hotplug remove) */ +extern int hvc_remove(struct hvc_struct *hp); + +/* data available */ +int hvc_poll(struct hvc_struct *hp); +void hvc_kick(void); + +/* Resize hvc tty terminal window */ +extern void __hvc_resize(struct hvc_struct *hp, struct winsize ws); + +static inline void hvc_resize(struct hvc_struct *hp, struct winsize ws) +{ + unsigned long flags; + + spin_lock_irqsave(&hp->lock, flags); + __hvc_resize(hp, ws); + spin_unlock_irqrestore(&hp->lock, flags); +} + +/* default notifier for irq based notification */ +extern int notifier_add_irq(struct hvc_struct *hp, int data); +extern void notifier_del_irq(struct hvc_struct *hp, int data); +extern void notifier_hangup_irq(struct hvc_struct *hp, int data); + + +#if defined(CONFIG_XMON) && defined(CONFIG_SMP) +#include +#else +static inline int cpus_are_in_xmon(void) +{ + return 0; +} +#endif + +#endif // HVC_CONSOLE_H diff --git a/drivers/tty/hvc/hvc_dcc.c b/drivers/tty/hvc/hvc_dcc.c new file mode 100644 index 000000000..8e0edb7d9 --- /dev/null +++ b/drivers/tty/hvc/hvc_dcc.c @@ -0,0 +1,115 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2010, 2014 The Linux Foundation. All rights reserved. */ + +#include +#include +#include +#include + +#include +#include + +#include "hvc_console.h" + +/* DCC Status Bits */ +#define DCC_STATUS_RX (1 << 30) +#define DCC_STATUS_TX (1 << 29) + +static void dcc_uart_console_putchar(struct uart_port *port, int ch) +{ + while (__dcc_getstatus() & DCC_STATUS_TX) + cpu_relax(); + + __dcc_putchar(ch); +} + +static void dcc_early_write(struct console *con, const char *s, unsigned n) +{ + struct earlycon_device *dev = con->data; + + uart_console_write(&dev->port, s, n, dcc_uart_console_putchar); +} + +static int __init dcc_early_console_setup(struct earlycon_device *device, + const char *opt) +{ + device->con->write = dcc_early_write; + + return 0; +} + +EARLYCON_DECLARE(dcc, dcc_early_console_setup); + +static int hvc_dcc_put_chars(uint32_t vt, const char *buf, int count) +{ + int i; + + for (i = 0; i < count; i++) { + while (__dcc_getstatus() & DCC_STATUS_TX) + cpu_relax(); + + __dcc_putchar(buf[i]); + } + + return count; +} + +static int hvc_dcc_get_chars(uint32_t vt, char *buf, int count) +{ + int i; + + for (i = 0; i < count; ++i) + if (__dcc_getstatus() & DCC_STATUS_RX) + buf[i] = __dcc_getchar(); + else + break; + + return i; +} + +static bool hvc_dcc_check(void) +{ + unsigned long time = jiffies + (HZ / 10); + + /* Write a test character to check if it is handled */ + __dcc_putchar('\n'); + + while (time_is_after_jiffies(time)) { + if (!(__dcc_getstatus() & DCC_STATUS_TX)) + return true; + } + + return false; +} + +static const struct hv_ops hvc_dcc_get_put_ops = { + .get_chars = hvc_dcc_get_chars, + .put_chars = hvc_dcc_put_chars, +}; + +static int __init hvc_dcc_console_init(void) +{ + int ret; + + if (!hvc_dcc_check()) + return -ENODEV; + + /* Returns -1 if error */ + ret = hvc_instantiate(0, 0, &hvc_dcc_get_put_ops); + + return ret < 0 ? -ENODEV : 0; +} +console_initcall(hvc_dcc_console_init); + +static int __init hvc_dcc_init(void) +{ + struct hvc_struct *p; + + if (!hvc_dcc_check()) + return -ENODEV; + + p = hvc_alloc(0, 0, &hvc_dcc_get_put_ops, 128); + + return PTR_ERR_OR_ZERO(p); +} +device_initcall(hvc_dcc_init); diff --git a/drivers/tty/hvc/hvc_irq.c b/drivers/tty/hvc/hvc_irq.c new file mode 100644 index 000000000..4b255dfef --- /dev/null +++ b/drivers/tty/hvc/hvc_irq.c @@ -0,0 +1,55 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright IBM Corp. 2001,2008 + * + * This file contains the IRQ specific code for hvc_console + * + */ + +#include + +#include "hvc_console.h" + +static irqreturn_t hvc_handle_interrupt(int irq, void *dev_instance) +{ + /* if hvc_poll request a repoll, then kick the hvcd thread */ + if (hvc_poll(dev_instance)) + hvc_kick(); + + /* + * We're safe to always return IRQ_HANDLED as the hvcd thread will + * iterate through each hvc_struct. + */ + return IRQ_HANDLED; +} + +/* + * For IRQ based systems these callbacks can be used + */ +int notifier_add_irq(struct hvc_struct *hp, int irq) +{ + int rc; + + if (!irq) { + hp->irq_requested = 0; + return 0; + } + rc = request_irq(irq, hvc_handle_interrupt, hp->flags, + "hvc_console", hp); + if (!rc) + hp->irq_requested = 1; + return rc; +} + +void notifier_del_irq(struct hvc_struct *hp, int irq) +{ + if (!hp->irq_requested) + return; + free_irq(irq, hp); + hp->irq_requested = 0; +} + +void notifier_hangup_irq(struct hvc_struct *hp, int irq) +{ + notifier_del_irq(hp, irq); +} diff --git a/drivers/tty/hvc/hvc_iucv.c b/drivers/tty/hvc/hvc_iucv.c new file mode 100644 index 000000000..796fbff62 --- /dev/null +++ b/drivers/tty/hvc/hvc_iucv.c @@ -0,0 +1,1481 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * z/VM IUCV hypervisor console (HVC) device driver + * + * This HVC device driver provides terminal access using + * z/VM IUCV communication paths. + * + * Copyright IBM Corp. 2008, 2013 + * + * Author(s): Hendrik Brueckner + */ +#define KMSG_COMPONENT "hvc_iucv" +#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "hvc_console.h" + + +/* General device driver settings */ +#define HVC_IUCV_MAGIC 0xc9e4c3e5 +#define MAX_HVC_IUCV_LINES HVC_ALLOC_TTY_ADAPTERS +#define MEMPOOL_MIN_NR (PAGE_SIZE / sizeof(struct iucv_tty_buffer)/4) + +/* IUCV TTY message */ +#define MSG_VERSION 0x02 /* Message version */ +#define MSG_TYPE_ERROR 0x01 /* Error message */ +#define MSG_TYPE_TERMENV 0x02 /* Terminal environment variable */ +#define MSG_TYPE_TERMIOS 0x04 /* Terminal IO struct update */ +#define MSG_TYPE_WINSIZE 0x08 /* Terminal window size update */ +#define MSG_TYPE_DATA 0x10 /* Terminal data */ + +struct iucv_tty_msg { + u8 version; /* Message version */ + u8 type; /* Message type */ +#define MSG_MAX_DATALEN ((u16)(~0)) + u16 datalen; /* Payload length */ + u8 data[]; /* Payload buffer */ +} __attribute__((packed)); +#define MSG_SIZE(s) ((s) + offsetof(struct iucv_tty_msg, data)) + +enum iucv_state_t { + IUCV_DISCONN = 0, + IUCV_CONNECTED = 1, + IUCV_SEVERED = 2, +}; + +enum tty_state_t { + TTY_CLOSED = 0, + TTY_OPENED = 1, +}; + +struct hvc_iucv_private { + struct hvc_struct *hvc; /* HVC struct reference */ + u8 srv_name[8]; /* IUCV service name (ebcdic) */ + unsigned char is_console; /* Linux console usage flag */ + enum iucv_state_t iucv_state; /* IUCV connection status */ + enum tty_state_t tty_state; /* TTY status */ + struct iucv_path *path; /* IUCV path pointer */ + spinlock_t lock; /* hvc_iucv_private lock */ +#define SNDBUF_SIZE (PAGE_SIZE) /* must be < MSG_MAX_DATALEN */ + void *sndbuf; /* send buffer */ + size_t sndbuf_len; /* length of send buffer */ +#define QUEUE_SNDBUF_DELAY (HZ / 25) + struct delayed_work sndbuf_work; /* work: send iucv msg(s) */ + wait_queue_head_t sndbuf_waitq; /* wait for send completion */ + struct list_head tty_outqueue; /* outgoing IUCV messages */ + struct list_head tty_inqueue; /* incoming IUCV messages */ + struct device *dev; /* device structure */ + u8 info_path[16]; /* IUCV path info (dev attr) */ +}; + +struct iucv_tty_buffer { + struct list_head list; /* list pointer */ + struct iucv_message msg; /* store an IUCV message */ + size_t offset; /* data buffer offset */ + struct iucv_tty_msg *mbuf; /* buffer to store input/output data */ +}; + +/* IUCV callback handler */ +static int hvc_iucv_path_pending(struct iucv_path *, u8 *, u8 *); +static void hvc_iucv_path_severed(struct iucv_path *, u8 *); +static void hvc_iucv_msg_pending(struct iucv_path *, struct iucv_message *); +static void hvc_iucv_msg_complete(struct iucv_path *, struct iucv_message *); + + +/* Kernel module parameter: use one terminal device as default */ +static unsigned long hvc_iucv_devices = 1; + +/* Array of allocated hvc iucv tty lines... */ +static struct hvc_iucv_private *hvc_iucv_table[MAX_HVC_IUCV_LINES]; +#define IUCV_HVC_CON_IDX (0) +/* List of z/VM user ID filter entries (struct iucv_vmid_filter) */ +#define MAX_VMID_FILTER (500) +#define FILTER_WILDCARD_CHAR '*' +static size_t hvc_iucv_filter_size; +static void *hvc_iucv_filter; +static const char *hvc_iucv_filter_string; +static DEFINE_RWLOCK(hvc_iucv_filter_lock); + +/* Kmem cache and mempool for iucv_tty_buffer elements */ +static struct kmem_cache *hvc_iucv_buffer_cache; +static mempool_t *hvc_iucv_mempool; + +/* IUCV handler callback functions */ +static struct iucv_handler hvc_iucv_handler = { + .path_pending = hvc_iucv_path_pending, + .path_severed = hvc_iucv_path_severed, + .message_complete = hvc_iucv_msg_complete, + .message_pending = hvc_iucv_msg_pending, +}; + + +/** + * hvc_iucv_get_private() - Return a struct hvc_iucv_private instance. + * @num: The HVC virtual terminal number (vtermno) + * + * This function returns the struct hvc_iucv_private instance that corresponds + * to the HVC virtual terminal number specified as parameter @num. + */ +static struct hvc_iucv_private *hvc_iucv_get_private(uint32_t num) +{ + if ((num < HVC_IUCV_MAGIC) || (num - HVC_IUCV_MAGIC > hvc_iucv_devices)) + return NULL; + return hvc_iucv_table[num - HVC_IUCV_MAGIC]; +} + +/** + * alloc_tty_buffer() - Return a new struct iucv_tty_buffer element. + * @size: Size of the internal buffer used to store data. + * @flags: Memory allocation flags passed to mempool. + * + * This function allocates a new struct iucv_tty_buffer element and, optionally, + * allocates an internal data buffer with the specified size @size. + * The internal data buffer is always allocated with GFP_DMA which is + * required for receiving and sending data with IUCV. + * Note: The total message size arises from the internal buffer size and the + * members of the iucv_tty_msg structure. + * The function returns NULL if memory allocation has failed. + */ +static struct iucv_tty_buffer *alloc_tty_buffer(size_t size, gfp_t flags) +{ + struct iucv_tty_buffer *bufp; + + bufp = mempool_alloc(hvc_iucv_mempool, flags); + if (!bufp) + return NULL; + memset(bufp, 0, sizeof(*bufp)); + + if (size > 0) { + bufp->msg.length = MSG_SIZE(size); + bufp->mbuf = kmalloc(bufp->msg.length, flags | GFP_DMA); + if (!bufp->mbuf) { + mempool_free(bufp, hvc_iucv_mempool); + return NULL; + } + bufp->mbuf->version = MSG_VERSION; + bufp->mbuf->type = MSG_TYPE_DATA; + bufp->mbuf->datalen = (u16) size; + } + return bufp; +} + +/** + * destroy_tty_buffer() - destroy struct iucv_tty_buffer element. + * @bufp: Pointer to a struct iucv_tty_buffer element, SHALL NOT be NULL. + */ +static void destroy_tty_buffer(struct iucv_tty_buffer *bufp) +{ + kfree(bufp->mbuf); + mempool_free(bufp, hvc_iucv_mempool); +} + +/** + * destroy_tty_buffer_list() - call destroy_tty_buffer() for each list element. + * @list: List containing struct iucv_tty_buffer elements. + */ +static void destroy_tty_buffer_list(struct list_head *list) +{ + struct iucv_tty_buffer *ent, *next; + + list_for_each_entry_safe(ent, next, list, list) { + list_del(&ent->list); + destroy_tty_buffer(ent); + } +} + +/** + * hvc_iucv_write() - Receive IUCV message & write data to HVC buffer. + * @priv: Pointer to struct hvc_iucv_private + * @buf: HVC buffer for writing received terminal data. + * @count: HVC buffer size. + * @has_more_data: Pointer to an int variable. + * + * The function picks up pending messages from the input queue and receives + * the message data that is then written to the specified buffer @buf. + * If the buffer size @count is less than the data message size, the + * message is kept on the input queue and @has_more_data is set to 1. + * If all message data has been written, the message is removed from + * the input queue. + * + * The function returns the number of bytes written to the terminal, zero if + * there are no pending data messages available or if there is no established + * IUCV path. + * If the IUCV path has been severed, then -EPIPE is returned to cause a + * hang up (that is issued by the HVC layer). + */ +static int hvc_iucv_write(struct hvc_iucv_private *priv, + char *buf, int count, int *has_more_data) +{ + struct iucv_tty_buffer *rb; + int written; + int rc; + + /* immediately return if there is no IUCV connection */ + if (priv->iucv_state == IUCV_DISCONN) + return 0; + + /* if the IUCV path has been severed, return -EPIPE to inform the + * HVC layer to hang up the tty device. */ + if (priv->iucv_state == IUCV_SEVERED) + return -EPIPE; + + /* check if there are pending messages */ + if (list_empty(&priv->tty_inqueue)) + return 0; + + /* receive an iucv message and flip data to the tty (ldisc) */ + rb = list_first_entry(&priv->tty_inqueue, struct iucv_tty_buffer, list); + + written = 0; + if (!rb->mbuf) { /* message not yet received ... */ + /* allocate mem to store msg data; if no memory is available + * then leave the buffer on the list and re-try later */ + rb->mbuf = kmalloc(rb->msg.length, GFP_ATOMIC | GFP_DMA); + if (!rb->mbuf) + return -ENOMEM; + + rc = __iucv_message_receive(priv->path, &rb->msg, 0, + rb->mbuf, rb->msg.length, NULL); + switch (rc) { + case 0: /* Successful */ + break; + case 2: /* No message found */ + case 9: /* Message purged */ + break; + default: + written = -EIO; + } + /* remove buffer if an error has occurred or received data + * is not correct */ + if (rc || (rb->mbuf->version != MSG_VERSION) || + (rb->msg.length != MSG_SIZE(rb->mbuf->datalen))) + goto out_remove_buffer; + } + + switch (rb->mbuf->type) { + case MSG_TYPE_DATA: + written = min_t(int, rb->mbuf->datalen - rb->offset, count); + memcpy(buf, rb->mbuf->data + rb->offset, written); + if (written < (rb->mbuf->datalen - rb->offset)) { + rb->offset += written; + *has_more_data = 1; + goto out_written; + } + break; + + case MSG_TYPE_WINSIZE: + if (rb->mbuf->datalen != sizeof(struct winsize)) + break; + /* The caller must ensure that the hvc is locked, which + * is the case when called from hvc_iucv_get_chars() */ + __hvc_resize(priv->hvc, *((struct winsize *) rb->mbuf->data)); + break; + + case MSG_TYPE_ERROR: /* ignored ... */ + case MSG_TYPE_TERMENV: /* ignored ... */ + case MSG_TYPE_TERMIOS: /* ignored ... */ + break; + } + +out_remove_buffer: + list_del(&rb->list); + destroy_tty_buffer(rb); + *has_more_data = !list_empty(&priv->tty_inqueue); + +out_written: + return written; +} + +/** + * hvc_iucv_get_chars() - HVC get_chars operation. + * @vtermno: HVC virtual terminal number. + * @buf: Pointer to a buffer to store data + * @count: Size of buffer available for writing + * + * The HVC thread calls this method to read characters from the back-end. + * If an IUCV communication path has been established, pending IUCV messages + * are received and data is copied into buffer @buf up to @count bytes. + * + * Locking: The routine gets called under an irqsave() spinlock; and + * the routine locks the struct hvc_iucv_private->lock to call + * helper functions. + */ +static int hvc_iucv_get_chars(uint32_t vtermno, char *buf, int count) +{ + struct hvc_iucv_private *priv = hvc_iucv_get_private(vtermno); + int written; + int has_more_data; + + if (count <= 0) + return 0; + + if (!priv) + return -ENODEV; + + spin_lock(&priv->lock); + has_more_data = 0; + written = hvc_iucv_write(priv, buf, count, &has_more_data); + spin_unlock(&priv->lock); + + /* if there are still messages on the queue... schedule another run */ + if (has_more_data) + hvc_kick(); + + return written; +} + +/** + * hvc_iucv_queue() - Buffer terminal data for sending. + * @priv: Pointer to struct hvc_iucv_private instance. + * @buf: Buffer containing data to send. + * @count: Size of buffer and amount of data to send. + * + * The function queues data for sending. To actually send the buffered data, + * a work queue function is scheduled (with QUEUE_SNDBUF_DELAY). + * The function returns the number of data bytes that has been buffered. + * + * If the device is not connected, data is ignored and the function returns + * @count. + * If the buffer is full, the function returns 0. + * If an existing IUCV communicaton path has been severed, -EPIPE is returned + * (that can be passed to HVC layer to cause a tty hangup). + */ +static int hvc_iucv_queue(struct hvc_iucv_private *priv, const char *buf, + int count) +{ + size_t len; + + if (priv->iucv_state == IUCV_DISCONN) + return count; /* ignore data */ + + if (priv->iucv_state == IUCV_SEVERED) + return -EPIPE; + + len = min_t(size_t, count, SNDBUF_SIZE - priv->sndbuf_len); + if (!len) + return 0; + + memcpy(priv->sndbuf + priv->sndbuf_len, buf, len); + priv->sndbuf_len += len; + + if (priv->iucv_state == IUCV_CONNECTED) + schedule_delayed_work(&priv->sndbuf_work, QUEUE_SNDBUF_DELAY); + + return len; +} + +/** + * hvc_iucv_send() - Send an IUCV message containing terminal data. + * @priv: Pointer to struct hvc_iucv_private instance. + * + * If an IUCV communication path has been established, the buffered output data + * is sent via an IUCV message and the number of bytes sent is returned. + * Returns 0 if there is no established IUCV communication path or + * -EPIPE if an existing IUCV communicaton path has been severed. + */ +static int hvc_iucv_send(struct hvc_iucv_private *priv) +{ + struct iucv_tty_buffer *sb; + int rc, len; + + if (priv->iucv_state == IUCV_SEVERED) + return -EPIPE; + + if (priv->iucv_state == IUCV_DISCONN) + return -EIO; + + if (!priv->sndbuf_len) + return 0; + + /* allocate internal buffer to store msg data and also compute total + * message length */ + sb = alloc_tty_buffer(priv->sndbuf_len, GFP_ATOMIC); + if (!sb) + return -ENOMEM; + + memcpy(sb->mbuf->data, priv->sndbuf, priv->sndbuf_len); + sb->mbuf->datalen = (u16) priv->sndbuf_len; + sb->msg.length = MSG_SIZE(sb->mbuf->datalen); + + list_add_tail(&sb->list, &priv->tty_outqueue); + + rc = __iucv_message_send(priv->path, &sb->msg, 0, 0, + (void *) sb->mbuf, sb->msg.length); + if (rc) { + /* drop the message here; however we might want to handle + * 0x03 (msg limit reached) by trying again... */ + list_del(&sb->list); + destroy_tty_buffer(sb); + } + len = priv->sndbuf_len; + priv->sndbuf_len = 0; + + return len; +} + +/** + * hvc_iucv_sndbuf_work() - Send buffered data over IUCV + * @work: Work structure. + * + * This work queue function sends buffered output data over IUCV and, + * if not all buffered data could be sent, reschedules itself. + */ +static void hvc_iucv_sndbuf_work(struct work_struct *work) +{ + struct hvc_iucv_private *priv; + + priv = container_of(work, struct hvc_iucv_private, sndbuf_work.work); + if (!priv) + return; + + spin_lock_bh(&priv->lock); + hvc_iucv_send(priv); + spin_unlock_bh(&priv->lock); +} + +/** + * hvc_iucv_put_chars() - HVC put_chars operation. + * @vtermno: HVC virtual terminal number. + * @buf: Pointer to an buffer to read data from + * @count: Size of buffer available for reading + * + * The HVC thread calls this method to write characters to the back-end. + * The function calls hvc_iucv_queue() to queue terminal data for sending. + * + * Locking: The method gets called under an irqsave() spinlock; and + * locks struct hvc_iucv_private->lock. + */ +static int hvc_iucv_put_chars(uint32_t vtermno, const char *buf, int count) +{ + struct hvc_iucv_private *priv = hvc_iucv_get_private(vtermno); + int queued; + + if (count <= 0) + return 0; + + if (!priv) + return -ENODEV; + + spin_lock(&priv->lock); + queued = hvc_iucv_queue(priv, buf, count); + spin_unlock(&priv->lock); + + return queued; +} + +/** + * hvc_iucv_notifier_add() - HVC notifier for opening a TTY for the first time. + * @hp: Pointer to the HVC device (struct hvc_struct) + * @id: Additional data (originally passed to hvc_alloc): the index of an struct + * hvc_iucv_private instance. + * + * The function sets the tty state to TTY_OPENED for the struct hvc_iucv_private + * instance that is derived from @id. Always returns 0. + * + * Locking: struct hvc_iucv_private->lock, spin_lock_bh + */ +static int hvc_iucv_notifier_add(struct hvc_struct *hp, int id) +{ + struct hvc_iucv_private *priv; + + priv = hvc_iucv_get_private(id); + if (!priv) + return 0; + + spin_lock_bh(&priv->lock); + priv->tty_state = TTY_OPENED; + spin_unlock_bh(&priv->lock); + + return 0; +} + +/** + * hvc_iucv_cleanup() - Clean up and reset a z/VM IUCV HVC instance. + * @priv: Pointer to the struct hvc_iucv_private instance. + */ +static void hvc_iucv_cleanup(struct hvc_iucv_private *priv) +{ + destroy_tty_buffer_list(&priv->tty_outqueue); + destroy_tty_buffer_list(&priv->tty_inqueue); + + priv->tty_state = TTY_CLOSED; + priv->iucv_state = IUCV_DISCONN; + + priv->sndbuf_len = 0; +} + +/** + * tty_outqueue_empty() - Test if the tty outq is empty + * @priv: Pointer to struct hvc_iucv_private instance. + */ +static inline int tty_outqueue_empty(struct hvc_iucv_private *priv) +{ + int rc; + + spin_lock_bh(&priv->lock); + rc = list_empty(&priv->tty_outqueue); + spin_unlock_bh(&priv->lock); + + return rc; +} + +/** + * flush_sndbuf_sync() - Flush send buffer and wait for completion + * @priv: Pointer to struct hvc_iucv_private instance. + * + * The routine cancels a pending sndbuf work, calls hvc_iucv_send() + * to flush any buffered terminal output data and waits for completion. + */ +static void flush_sndbuf_sync(struct hvc_iucv_private *priv) +{ + int sync_wait; + + cancel_delayed_work_sync(&priv->sndbuf_work); + + spin_lock_bh(&priv->lock); + hvc_iucv_send(priv); /* force sending buffered data */ + sync_wait = !list_empty(&priv->tty_outqueue); /* anything queued ? */ + spin_unlock_bh(&priv->lock); + + if (sync_wait) + wait_event_timeout(priv->sndbuf_waitq, + tty_outqueue_empty(priv), HZ/10); +} + +/** + * hvc_iucv_hangup() - Sever IUCV path and schedule hvc tty hang up + * @priv: Pointer to hvc_iucv_private structure + * + * This routine severs an existing IUCV communication path and hangs + * up the underlying HVC terminal device. + * The hang-up occurs only if an IUCV communication path is established; + * otherwise there is no need to hang up the terminal device. + * + * The IUCV HVC hang-up is separated into two steps: + * 1. After the IUCV path has been severed, the iucv_state is set to + * IUCV_SEVERED. + * 2. Later, when the HVC thread calls hvc_iucv_get_chars(), the + * IUCV_SEVERED state causes the tty hang-up in the HVC layer. + * + * If the tty has not yet been opened, clean up the hvc_iucv_private + * structure to allow re-connects. + * If the tty has been opened, let get_chars() return -EPIPE to signal + * the HVC layer to hang up the tty and, if so, wake up the HVC thread + * to call get_chars()... + * + * Special notes on hanging up a HVC terminal instantiated as console: + * Hang-up: 1. do_tty_hangup() replaces file ops (= hung_up_tty_fops) + * 2. do_tty_hangup() calls tty->ops->close() for console_filp + * => no hangup notifier is called by HVC (default) + * 2. hvc_close() returns because of tty_hung_up_p(filp) + * => no delete notifier is called! + * Finally, the back-end is not being notified, thus, the tty session is + * kept active (TTY_OPEN) to be ready for re-connects. + * + * Locking: spin_lock(&priv->lock) w/o disabling bh + */ +static void hvc_iucv_hangup(struct hvc_iucv_private *priv) +{ + struct iucv_path *path; + + path = NULL; + spin_lock(&priv->lock); + if (priv->iucv_state == IUCV_CONNECTED) { + path = priv->path; + priv->path = NULL; + priv->iucv_state = IUCV_SEVERED; + if (priv->tty_state == TTY_CLOSED) + hvc_iucv_cleanup(priv); + else + /* console is special (see above) */ + if (priv->is_console) { + hvc_iucv_cleanup(priv); + priv->tty_state = TTY_OPENED; + } else + hvc_kick(); + } + spin_unlock(&priv->lock); + + /* finally sever path (outside of priv->lock due to lock ordering) */ + if (path) { + iucv_path_sever(path, NULL); + iucv_path_free(path); + } +} + +/** + * hvc_iucv_notifier_hangup() - HVC notifier for TTY hangups. + * @hp: Pointer to the HVC device (struct hvc_struct) + * @id: Additional data (originally passed to hvc_alloc): + * the index of an struct hvc_iucv_private instance. + * + * This routine notifies the HVC back-end that a tty hangup (carrier loss, + * virtual or otherwise) has occurred. + * The z/VM IUCV HVC device driver ignores virtual hangups (vhangup()) + * to keep an existing IUCV communication path established. + * (Background: vhangup() is called from user space (by getty or login) to + * disable writing to the tty by other applications). + * If the tty has been opened and an established IUCV path has been severed + * (we caused the tty hangup), the function calls hvc_iucv_cleanup(). + * + * Locking: struct hvc_iucv_private->lock + */ +static void hvc_iucv_notifier_hangup(struct hvc_struct *hp, int id) +{ + struct hvc_iucv_private *priv; + + priv = hvc_iucv_get_private(id); + if (!priv) + return; + + flush_sndbuf_sync(priv); + + spin_lock_bh(&priv->lock); + /* NOTE: If the hangup was scheduled by ourself (from the iucv + * path_servered callback [IUCV_SEVERED]), we have to clean up + * our structure and to set state to TTY_CLOSED. + * If the tty was hung up otherwise (e.g. vhangup()), then we + * ignore this hangup and keep an established IUCV path open... + * (...the reason is that we are not able to connect back to the + * client if we disconnect on hang up) */ + priv->tty_state = TTY_CLOSED; + + if (priv->iucv_state == IUCV_SEVERED) + hvc_iucv_cleanup(priv); + spin_unlock_bh(&priv->lock); +} + +/** + * hvc_iucv_dtr_rts() - HVC notifier for handling DTR/RTS + * @hp: Pointer the HVC device (struct hvc_struct) + * @raise: Non-zero to raise or zero to lower DTR/RTS lines + * + * This routine notifies the HVC back-end to raise or lower DTR/RTS + * lines. Raising DTR/RTS is ignored. Lowering DTR/RTS indicates to + * drop the IUCV connection (similar to hang up the modem). + */ +static void hvc_iucv_dtr_rts(struct hvc_struct *hp, int raise) +{ + struct hvc_iucv_private *priv; + struct iucv_path *path; + + /* Raising the DTR/RTS is ignored as IUCV connections can be + * established at any times. + */ + if (raise) + return; + + priv = hvc_iucv_get_private(hp->vtermno); + if (!priv) + return; + + /* Lowering the DTR/RTS lines disconnects an established IUCV + * connection. + */ + flush_sndbuf_sync(priv); + + spin_lock_bh(&priv->lock); + path = priv->path; /* save reference to IUCV path */ + priv->path = NULL; + priv->iucv_state = IUCV_DISCONN; + spin_unlock_bh(&priv->lock); + + /* Sever IUCV path outside of priv->lock due to lock ordering of: + * priv->lock <--> iucv_table_lock */ + if (path) { + iucv_path_sever(path, NULL); + iucv_path_free(path); + } +} + +/** + * hvc_iucv_notifier_del() - HVC notifier for closing a TTY for the last time. + * @hp: Pointer to the HVC device (struct hvc_struct) + * @id: Additional data (originally passed to hvc_alloc): + * the index of an struct hvc_iucv_private instance. + * + * This routine notifies the HVC back-end that the last tty device fd has been + * closed. The function cleans up tty resources. The clean-up of the IUCV + * connection is done in hvc_iucv_dtr_rts() and depends on the HUPCL termios + * control setting. + * + * Locking: struct hvc_iucv_private->lock + */ +static void hvc_iucv_notifier_del(struct hvc_struct *hp, int id) +{ + struct hvc_iucv_private *priv; + + priv = hvc_iucv_get_private(id); + if (!priv) + return; + + flush_sndbuf_sync(priv); + + spin_lock_bh(&priv->lock); + destroy_tty_buffer_list(&priv->tty_outqueue); + destroy_tty_buffer_list(&priv->tty_inqueue); + priv->tty_state = TTY_CLOSED; + priv->sndbuf_len = 0; + spin_unlock_bh(&priv->lock); +} + +/** + * hvc_iucv_filter_connreq() - Filter connection request based on z/VM user ID + * @ipvmid: Originating z/VM user ID (right padded with blanks) + * + * Returns 0 if the z/VM user ID that is specified with @ipvmid is permitted to + * connect, otherwise non-zero. + */ +static int hvc_iucv_filter_connreq(u8 ipvmid[8]) +{ + const char *wildcard, *filter_entry; + size_t i, len; + + /* Note: default policy is ACCEPT if no filter is set */ + if (!hvc_iucv_filter_size) + return 0; + + for (i = 0; i < hvc_iucv_filter_size; i++) { + filter_entry = hvc_iucv_filter + (8 * i); + + /* If a filter entry contains the filter wildcard character, + * reduce the length to match the leading portion of the user + * ID only (wildcard match). Characters following the wildcard + * are ignored. + */ + wildcard = strnchr(filter_entry, 8, FILTER_WILDCARD_CHAR); + len = (wildcard) ? wildcard - filter_entry : 8; + if (0 == memcmp(ipvmid, filter_entry, len)) + return 0; + } + return 1; +} + +/** + * hvc_iucv_path_pending() - IUCV handler to process a connection request. + * @path: Pending path (struct iucv_path) + * @ipvmid: z/VM system identifier of originator + * @ipuser: User specified data for this path + * (AF_IUCV: port/service name and originator port) + * + * The function uses the @ipuser data to determine if the pending path belongs + * to a terminal managed by this device driver. + * If the path belongs to this driver, ensure that the terminal is not accessed + * multiple times (only one connection to a terminal is allowed). + * If the terminal is not yet connected, the pending path is accepted and is + * associated to the appropriate struct hvc_iucv_private instance. + * + * Returns 0 if @path belongs to a terminal managed by the this device driver; + * otherwise returns -ENODEV in order to dispatch this path to other handlers. + * + * Locking: struct hvc_iucv_private->lock + */ +static int hvc_iucv_path_pending(struct iucv_path *path, u8 *ipvmid, + u8 *ipuser) +{ + struct hvc_iucv_private *priv, *tmp; + u8 wildcard[9] = "lnxhvc "; + int i, rc, find_unused; + u8 nuser_data[16]; + u8 vm_user_id[9]; + + ASCEBC(wildcard, sizeof(wildcard)); + find_unused = !memcmp(wildcard, ipuser, 8); + + /* First, check if the pending path request is managed by this + * IUCV handler: + * - find a disconnected device if ipuser contains the wildcard + * - find the device that matches the terminal ID in ipuser + */ + priv = NULL; + for (i = 0; i < hvc_iucv_devices; i++) { + tmp = hvc_iucv_table[i]; + if (!tmp) + continue; + + if (find_unused) { + spin_lock(&tmp->lock); + if (tmp->iucv_state == IUCV_DISCONN) + priv = tmp; + spin_unlock(&tmp->lock); + + } else if (!memcmp(tmp->srv_name, ipuser, 8)) + priv = tmp; + if (priv) + break; + } + if (!priv) + return -ENODEV; + + /* Enforce that ipvmid is allowed to connect to us */ + read_lock(&hvc_iucv_filter_lock); + rc = hvc_iucv_filter_connreq(ipvmid); + read_unlock(&hvc_iucv_filter_lock); + if (rc) { + iucv_path_sever(path, ipuser); + iucv_path_free(path); + memcpy(vm_user_id, ipvmid, 8); + vm_user_id[8] = 0; + pr_info("A connection request from z/VM user ID %s " + "was refused\n", vm_user_id); + return 0; + } + + spin_lock(&priv->lock); + + /* If the terminal is already connected or being severed, then sever + * this path to enforce that there is only ONE established communication + * path per terminal. */ + if (priv->iucv_state != IUCV_DISCONN) { + iucv_path_sever(path, ipuser); + iucv_path_free(path); + goto out_path_handled; + } + + /* accept path */ + memcpy(nuser_data, ipuser + 8, 8); /* remote service (for af_iucv) */ + memcpy(nuser_data + 8, ipuser, 8); /* local service (for af_iucv) */ + path->msglim = 0xffff; /* IUCV MSGLIMIT */ + path->flags &= ~IUCV_IPRMDATA; /* TODO: use IUCV_IPRMDATA */ + rc = iucv_path_accept(path, &hvc_iucv_handler, nuser_data, priv); + if (rc) { + iucv_path_sever(path, ipuser); + iucv_path_free(path); + goto out_path_handled; + } + priv->path = path; + priv->iucv_state = IUCV_CONNECTED; + + /* store path information */ + memcpy(priv->info_path, ipvmid, 8); + memcpy(priv->info_path + 8, ipuser + 8, 8); + + /* flush buffered output data... */ + schedule_delayed_work(&priv->sndbuf_work, 5); + +out_path_handled: + spin_unlock(&priv->lock); + return 0; +} + +/** + * hvc_iucv_path_severed() - IUCV handler to process a path sever. + * @path: Pending path (struct iucv_path) + * @ipuser: User specified data for this path + * (AF_IUCV: port/service name and originator port) + * + * This function calls the hvc_iucv_hangup() function for the + * respective IUCV HVC terminal. + * + * Locking: struct hvc_iucv_private->lock + */ +static void hvc_iucv_path_severed(struct iucv_path *path, u8 *ipuser) +{ + struct hvc_iucv_private *priv = path->private; + + hvc_iucv_hangup(priv); +} + +/** + * hvc_iucv_msg_pending() - IUCV handler to process an incoming IUCV message. + * @path: Pending path (struct iucv_path) + * @msg: Pointer to the IUCV message + * + * The function puts an incoming message on the input queue for later + * processing (by hvc_iucv_get_chars() / hvc_iucv_write()). + * If the tty has not yet been opened, the message is rejected. + * + * Locking: struct hvc_iucv_private->lock + */ +static void hvc_iucv_msg_pending(struct iucv_path *path, + struct iucv_message *msg) +{ + struct hvc_iucv_private *priv = path->private; + struct iucv_tty_buffer *rb; + + /* reject messages that exceed max size of iucv_tty_msg->datalen */ + if (msg->length > MSG_SIZE(MSG_MAX_DATALEN)) { + iucv_message_reject(path, msg); + return; + } + + spin_lock(&priv->lock); + + /* reject messages if tty has not yet been opened */ + if (priv->tty_state == TTY_CLOSED) { + iucv_message_reject(path, msg); + goto unlock_return; + } + + /* allocate tty buffer to save iucv msg only */ + rb = alloc_tty_buffer(0, GFP_ATOMIC); + if (!rb) { + iucv_message_reject(path, msg); + goto unlock_return; /* -ENOMEM */ + } + rb->msg = *msg; + + list_add_tail(&rb->list, &priv->tty_inqueue); + + hvc_kick(); /* wake up hvc thread */ + +unlock_return: + spin_unlock(&priv->lock); +} + +/** + * hvc_iucv_msg_complete() - IUCV handler to process message completion + * @path: Pending path (struct iucv_path) + * @msg: Pointer to the IUCV message + * + * The function is called upon completion of message delivery to remove the + * message from the outqueue. Additional delivery information can be found + * msg->audit: rejected messages (0x040000 (IPADRJCT)), and + * purged messages (0x010000 (IPADPGNR)). + * + * Locking: struct hvc_iucv_private->lock + */ +static void hvc_iucv_msg_complete(struct iucv_path *path, + struct iucv_message *msg) +{ + struct hvc_iucv_private *priv = path->private; + struct iucv_tty_buffer *ent, *next; + LIST_HEAD(list_remove); + + spin_lock(&priv->lock); + list_for_each_entry_safe(ent, next, &priv->tty_outqueue, list) + if (ent->msg.id == msg->id) { + list_move(&ent->list, &list_remove); + break; + } + wake_up(&priv->sndbuf_waitq); + spin_unlock(&priv->lock); + destroy_tty_buffer_list(&list_remove); +} + +/** + * hvc_iucv_pm_freeze() - Freeze PM callback + * @dev: IUVC HVC terminal device + * + * Sever an established IUCV communication path and + * trigger a hang-up of the underlying HVC terminal. + */ +static int hvc_iucv_pm_freeze(struct device *dev) +{ + struct hvc_iucv_private *priv = dev_get_drvdata(dev); + + local_bh_disable(); + hvc_iucv_hangup(priv); + local_bh_enable(); + + return 0; +} + +/** + * hvc_iucv_pm_restore_thaw() - Thaw and restore PM callback + * @dev: IUVC HVC terminal device + * + * Wake up the HVC thread to trigger hang-up and respective + * HVC back-end notifier invocations. + */ +static int hvc_iucv_pm_restore_thaw(struct device *dev) +{ + hvc_kick(); + return 0; +} + +static ssize_t hvc_iucv_dev_termid_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct hvc_iucv_private *priv = dev_get_drvdata(dev); + size_t len; + + len = sizeof(priv->srv_name); + memcpy(buf, priv->srv_name, len); + EBCASC(buf, len); + buf[len++] = '\n'; + return len; +} + +static ssize_t hvc_iucv_dev_state_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct hvc_iucv_private *priv = dev_get_drvdata(dev); + return sprintf(buf, "%u:%u\n", priv->iucv_state, priv->tty_state); +} + +static ssize_t hvc_iucv_dev_peer_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct hvc_iucv_private *priv = dev_get_drvdata(dev); + char vmid[9], ipuser[9]; + + memset(vmid, 0, sizeof(vmid)); + memset(ipuser, 0, sizeof(ipuser)); + + spin_lock_bh(&priv->lock); + if (priv->iucv_state == IUCV_CONNECTED) { + memcpy(vmid, priv->info_path, 8); + memcpy(ipuser, priv->info_path + 8, 8); + } + spin_unlock_bh(&priv->lock); + EBCASC(ipuser, 8); + + return sprintf(buf, "%s:%s\n", vmid, ipuser); +} + + +/* HVC operations */ +static const struct hv_ops hvc_iucv_ops = { + .get_chars = hvc_iucv_get_chars, + .put_chars = hvc_iucv_put_chars, + .notifier_add = hvc_iucv_notifier_add, + .notifier_del = hvc_iucv_notifier_del, + .notifier_hangup = hvc_iucv_notifier_hangup, + .dtr_rts = hvc_iucv_dtr_rts, +}; + +/* Suspend / resume device operations */ +static const struct dev_pm_ops hvc_iucv_pm_ops = { + .freeze = hvc_iucv_pm_freeze, + .thaw = hvc_iucv_pm_restore_thaw, + .restore = hvc_iucv_pm_restore_thaw, +}; + +/* IUCV HVC device driver */ +static struct device_driver hvc_iucv_driver = { + .name = KMSG_COMPONENT, + .bus = &iucv_bus, + .pm = &hvc_iucv_pm_ops, +}; + +/* IUCV HVC device attributes */ +static DEVICE_ATTR(termid, 0640, hvc_iucv_dev_termid_show, NULL); +static DEVICE_ATTR(state, 0640, hvc_iucv_dev_state_show, NULL); +static DEVICE_ATTR(peer, 0640, hvc_iucv_dev_peer_show, NULL); +static struct attribute *hvc_iucv_dev_attrs[] = { + &dev_attr_termid.attr, + &dev_attr_state.attr, + &dev_attr_peer.attr, + NULL, +}; +static struct attribute_group hvc_iucv_dev_attr_group = { + .attrs = hvc_iucv_dev_attrs, +}; +static const struct attribute_group *hvc_iucv_dev_attr_groups[] = { + &hvc_iucv_dev_attr_group, + NULL, +}; + + +/** + * hvc_iucv_alloc() - Allocates a new struct hvc_iucv_private instance + * @id: hvc_iucv_table index + * @is_console: Flag if the instance is used as Linux console + * + * This function allocates a new hvc_iucv_private structure and stores + * the instance in hvc_iucv_table at index @id. + * Returns 0 on success; otherwise non-zero. + */ +static int __init hvc_iucv_alloc(int id, unsigned int is_console) +{ + struct hvc_iucv_private *priv; + char name[9]; + int rc; + + priv = kzalloc(sizeof(struct hvc_iucv_private), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + spin_lock_init(&priv->lock); + INIT_LIST_HEAD(&priv->tty_outqueue); + INIT_LIST_HEAD(&priv->tty_inqueue); + INIT_DELAYED_WORK(&priv->sndbuf_work, hvc_iucv_sndbuf_work); + init_waitqueue_head(&priv->sndbuf_waitq); + + priv->sndbuf = (void *) get_zeroed_page(GFP_KERNEL); + if (!priv->sndbuf) { + kfree(priv); + return -ENOMEM; + } + + /* set console flag */ + priv->is_console = is_console; + + /* allocate hvc device */ + priv->hvc = hvc_alloc(HVC_IUCV_MAGIC + id, /* PAGE_SIZE */ + HVC_IUCV_MAGIC + id, &hvc_iucv_ops, 256); + if (IS_ERR(priv->hvc)) { + rc = PTR_ERR(priv->hvc); + goto out_error_hvc; + } + + /* notify HVC thread instead of using polling */ + priv->hvc->irq_requested = 1; + + /* setup iucv related information */ + snprintf(name, 9, "lnxhvc%-2d", id); + memcpy(priv->srv_name, name, 8); + ASCEBC(priv->srv_name, 8); + + /* create and setup device */ + priv->dev = kzalloc(sizeof(*priv->dev), GFP_KERNEL); + if (!priv->dev) { + rc = -ENOMEM; + goto out_error_dev; + } + dev_set_name(priv->dev, "hvc_iucv%d", id); + dev_set_drvdata(priv->dev, priv); + priv->dev->bus = &iucv_bus; + priv->dev->parent = iucv_root; + priv->dev->driver = &hvc_iucv_driver; + priv->dev->groups = hvc_iucv_dev_attr_groups; + priv->dev->release = (void (*)(struct device *)) kfree; + rc = device_register(priv->dev); + if (rc) { + put_device(priv->dev); + goto out_error_dev; + } + + hvc_iucv_table[id] = priv; + return 0; + +out_error_dev: + hvc_remove(priv->hvc); +out_error_hvc: + free_page((unsigned long) priv->sndbuf); + kfree(priv); + + return rc; +} + +/** + * hvc_iucv_destroy() - Destroy and free hvc_iucv_private instances + */ +static void __init hvc_iucv_destroy(struct hvc_iucv_private *priv) +{ + hvc_remove(priv->hvc); + device_unregister(priv->dev); + free_page((unsigned long) priv->sndbuf); + kfree(priv); +} + +/** + * hvc_iucv_parse_filter() - Parse filter for a single z/VM user ID + * @filter: String containing a comma-separated list of z/VM user IDs + * @dest: Location where to store the parsed z/VM user ID + */ +static const char *hvc_iucv_parse_filter(const char *filter, char *dest) +{ + const char *nextdelim, *residual; + size_t len; + + nextdelim = strchr(filter, ','); + if (nextdelim) { + len = nextdelim - filter; + residual = nextdelim + 1; + } else { + len = strlen(filter); + residual = filter + len; + } + + if (len == 0) + return ERR_PTR(-EINVAL); + + /* check for '\n' (if called from sysfs) */ + if (filter[len - 1] == '\n') + len--; + + /* prohibit filter entries containing the wildcard character only */ + if (len == 1 && *filter == FILTER_WILDCARD_CHAR) + return ERR_PTR(-EINVAL); + + if (len > 8) + return ERR_PTR(-EINVAL); + + /* pad with blanks and save upper case version of user ID */ + memset(dest, ' ', 8); + while (len--) + dest[len] = toupper(filter[len]); + return residual; +} + +/** + * hvc_iucv_setup_filter() - Set up z/VM user ID filter + * @filter: String consisting of a comma-separated list of z/VM user IDs + * + * The function parses the @filter string and creates an array containing + * the list of z/VM user ID filter entries. + * Return code 0 means success, -EINVAL if the filter is syntactically + * incorrect, -ENOMEM if there was not enough memory to allocate the + * filter list array, or -ENOSPC if too many z/VM user IDs have been specified. + */ +static int hvc_iucv_setup_filter(const char *val) +{ + const char *residual; + int err; + size_t size, count; + void *array, *old_filter; + + count = strlen(val); + if (count == 0 || (count == 1 && val[0] == '\n')) { + size = 0; + array = NULL; + goto out_replace_filter; /* clear filter */ + } + + /* count user IDs in order to allocate sufficient memory */ + size = 1; + residual = val; + while ((residual = strchr(residual, ',')) != NULL) { + residual++; + size++; + } + + /* check if the specified list exceeds the filter limit */ + if (size > MAX_VMID_FILTER) + return -ENOSPC; + + array = kcalloc(size, 8, GFP_KERNEL); + if (!array) + return -ENOMEM; + + count = size; + residual = val; + while (*residual && count) { + residual = hvc_iucv_parse_filter(residual, + array + ((size - count) * 8)); + if (IS_ERR(residual)) { + err = PTR_ERR(residual); + kfree(array); + goto out_err; + } + count--; + } + +out_replace_filter: + write_lock_bh(&hvc_iucv_filter_lock); + old_filter = hvc_iucv_filter; + hvc_iucv_filter_size = size; + hvc_iucv_filter = array; + write_unlock_bh(&hvc_iucv_filter_lock); + kfree(old_filter); + + err = 0; +out_err: + return err; +} + +/** + * param_set_vmidfilter() - Set z/VM user ID filter parameter + * @val: String consisting of a comma-separated list of z/VM user IDs + * @kp: Kernel parameter pointing to hvc_iucv_filter array + * + * The function sets up the z/VM user ID filter specified as comma-separated + * list of user IDs in @val. + * Note: If it is called early in the boot process, @val is stored and + * parsed later in hvc_iucv_init(). + */ +static int param_set_vmidfilter(const char *val, const struct kernel_param *kp) +{ + int rc; + + if (!MACHINE_IS_VM || !hvc_iucv_devices) + return -ENODEV; + + if (!val) + return -EINVAL; + + rc = 0; + if (slab_is_available()) + rc = hvc_iucv_setup_filter(val); + else + hvc_iucv_filter_string = val; /* defer... */ + return rc; +} + +/** + * param_get_vmidfilter() - Get z/VM user ID filter + * @buffer: Buffer to store z/VM user ID filter, + * (buffer size assumption PAGE_SIZE) + * @kp: Kernel parameter pointing to the hvc_iucv_filter array + * + * The function stores the filter as a comma-separated list of z/VM user IDs + * in @buffer. Typically, sysfs routines call this function for attr show. + */ +static int param_get_vmidfilter(char *buffer, const struct kernel_param *kp) +{ + int rc; + size_t index, len; + void *start, *end; + + if (!MACHINE_IS_VM || !hvc_iucv_devices) + return -ENODEV; + + rc = 0; + read_lock_bh(&hvc_iucv_filter_lock); + for (index = 0; index < hvc_iucv_filter_size; index++) { + start = hvc_iucv_filter + (8 * index); + end = memchr(start, ' ', 8); + len = (end) ? end - start : 8; + memcpy(buffer + rc, start, len); + rc += len; + buffer[rc++] = ','; + } + read_unlock_bh(&hvc_iucv_filter_lock); + if (rc) + buffer[--rc] = '\0'; /* replace last comma and update rc */ + return rc; +} + +#define param_check_vmidfilter(name, p) __param_check(name, p, void) + +static const struct kernel_param_ops param_ops_vmidfilter = { + .set = param_set_vmidfilter, + .get = param_get_vmidfilter, +}; + +/** + * hvc_iucv_init() - z/VM IUCV HVC device driver initialization + */ +static int __init hvc_iucv_init(void) +{ + int rc; + unsigned int i; + + if (!hvc_iucv_devices) + return -ENODEV; + + if (!MACHINE_IS_VM) { + pr_notice("The z/VM IUCV HVC device driver cannot " + "be used without z/VM\n"); + rc = -ENODEV; + goto out_error; + } + + if (hvc_iucv_devices > MAX_HVC_IUCV_LINES) { + pr_err("%lu is not a valid value for the hvc_iucv= " + "kernel parameter\n", hvc_iucv_devices); + rc = -EINVAL; + goto out_error; + } + + /* register IUCV HVC device driver */ + rc = driver_register(&hvc_iucv_driver); + if (rc) + goto out_error; + + /* parse hvc_iucv_allow string and create z/VM user ID filter list */ + if (hvc_iucv_filter_string) { + rc = hvc_iucv_setup_filter(hvc_iucv_filter_string); + switch (rc) { + case 0: + break; + case -ENOMEM: + pr_err("Allocating memory failed with " + "reason code=%d\n", 3); + goto out_error; + case -EINVAL: + pr_err("hvc_iucv_allow= does not specify a valid " + "z/VM user ID list\n"); + goto out_error; + case -ENOSPC: + pr_err("hvc_iucv_allow= specifies too many " + "z/VM user IDs\n"); + goto out_error; + default: + goto out_error; + } + } + + hvc_iucv_buffer_cache = kmem_cache_create(KMSG_COMPONENT, + sizeof(struct iucv_tty_buffer), + 0, 0, NULL); + if (!hvc_iucv_buffer_cache) { + pr_err("Allocating memory failed with reason code=%d\n", 1); + rc = -ENOMEM; + goto out_error; + } + + hvc_iucv_mempool = mempool_create_slab_pool(MEMPOOL_MIN_NR, + hvc_iucv_buffer_cache); + if (!hvc_iucv_mempool) { + pr_err("Allocating memory failed with reason code=%d\n", 2); + kmem_cache_destroy(hvc_iucv_buffer_cache); + rc = -ENOMEM; + goto out_error; + } + + /* register the first terminal device as console + * (must be done before allocating hvc terminal devices) */ + rc = hvc_instantiate(HVC_IUCV_MAGIC, IUCV_HVC_CON_IDX, &hvc_iucv_ops); + if (rc) { + pr_err("Registering HVC terminal device as " + "Linux console failed\n"); + goto out_error_memory; + } + + /* allocate hvc_iucv_private structs */ + for (i = 0; i < hvc_iucv_devices; i++) { + rc = hvc_iucv_alloc(i, (i == IUCV_HVC_CON_IDX) ? 1 : 0); + if (rc) { + pr_err("Creating a new HVC terminal device " + "failed with error code=%d\n", rc); + goto out_error_hvc; + } + } + + /* register IUCV callback handler */ + rc = iucv_register(&hvc_iucv_handler, 0); + if (rc) { + pr_err("Registering IUCV handlers failed with error code=%d\n", + rc); + goto out_error_hvc; + } + + return 0; + +out_error_hvc: + for (i = 0; i < hvc_iucv_devices; i++) + if (hvc_iucv_table[i]) + hvc_iucv_destroy(hvc_iucv_table[i]); +out_error_memory: + mempool_destroy(hvc_iucv_mempool); + kmem_cache_destroy(hvc_iucv_buffer_cache); +out_error: + kfree(hvc_iucv_filter); + hvc_iucv_devices = 0; /* ensure that we do not provide any device */ + return rc; +} + +/** + * hvc_iucv_config() - Parsing of hvc_iucv= kernel command line parameter + * @val: Parameter value (numeric) + */ +static int __init hvc_iucv_config(char *val) +{ + if (kstrtoul(val, 10, &hvc_iucv_devices)) + pr_warn("hvc_iucv= invalid parameter value '%s'\n", val); + return 1; +} + + +device_initcall(hvc_iucv_init); +__setup("hvc_iucv=", hvc_iucv_config); +core_param(hvc_iucv_allow, hvc_iucv_filter, vmidfilter, 0640); diff --git a/drivers/tty/hvc/hvc_opal.c b/drivers/tty/hvc/hvc_opal.c new file mode 100644 index 000000000..c66412566 --- /dev/null +++ b/drivers/tty/hvc/hvc_opal.c @@ -0,0 +1,419 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * opal driver interface to hvc_console.c + * + * Copyright 2011 Benjamin Herrenschmidt , IBM Corp. + */ + +#undef DEBUG + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "hvc_console.h" + +static const char hvc_opal_name[] = "hvc_opal"; + +static const struct of_device_id hvc_opal_match[] = { + { .name = "serial", .compatible = "ibm,opal-console-raw" }, + { .name = "serial", .compatible = "ibm,opal-console-hvsi" }, + { }, +}; + +typedef enum hv_protocol { + HV_PROTOCOL_RAW, + HV_PROTOCOL_HVSI +} hv_protocol_t; + +struct hvc_opal_priv { + hv_protocol_t proto; /* Raw data or HVSI packets */ + struct hvsi_priv hvsi; /* HVSI specific data */ +}; +static struct hvc_opal_priv *hvc_opal_privs[MAX_NR_HVC_CONSOLES]; + +/* For early boot console */ +static struct hvc_opal_priv hvc_opal_boot_priv; +static u32 hvc_opal_boot_termno; + +static const struct hv_ops hvc_opal_raw_ops = { + .get_chars = opal_get_chars, + .put_chars = opal_put_chars, + .flush = opal_flush_chars, + .notifier_add = notifier_add_irq, + .notifier_del = notifier_del_irq, + .notifier_hangup = notifier_hangup_irq, +}; + +static int hvc_opal_hvsi_get_chars(uint32_t vtermno, char *buf, int count) +{ + struct hvc_opal_priv *pv = hvc_opal_privs[vtermno]; + + if (WARN_ON(!pv)) + return -ENODEV; + + return hvsilib_get_chars(&pv->hvsi, buf, count); +} + +static int hvc_opal_hvsi_put_chars(uint32_t vtermno, const char *buf, int count) +{ + struct hvc_opal_priv *pv = hvc_opal_privs[vtermno]; + + if (WARN_ON(!pv)) + return -ENODEV; + + return hvsilib_put_chars(&pv->hvsi, buf, count); +} + +static int hvc_opal_hvsi_open(struct hvc_struct *hp, int data) +{ + struct hvc_opal_priv *pv = hvc_opal_privs[hp->vtermno]; + int rc; + + pr_devel("HVSI@%x: do open !\n", hp->vtermno); + + rc = notifier_add_irq(hp, data); + if (rc) + return rc; + + return hvsilib_open(&pv->hvsi, hp); +} + +static void hvc_opal_hvsi_close(struct hvc_struct *hp, int data) +{ + struct hvc_opal_priv *pv = hvc_opal_privs[hp->vtermno]; + + pr_devel("HVSI@%x: do close !\n", hp->vtermno); + + hvsilib_close(&pv->hvsi, hp); + + notifier_del_irq(hp, data); +} + +void hvc_opal_hvsi_hangup(struct hvc_struct *hp, int data) +{ + struct hvc_opal_priv *pv = hvc_opal_privs[hp->vtermno]; + + pr_devel("HVSI@%x: do hangup !\n", hp->vtermno); + + hvsilib_close(&pv->hvsi, hp); + + notifier_hangup_irq(hp, data); +} + +static int hvc_opal_hvsi_tiocmget(struct hvc_struct *hp) +{ + struct hvc_opal_priv *pv = hvc_opal_privs[hp->vtermno]; + + if (!pv) + return -EINVAL; + return pv->hvsi.mctrl; +} + +static int hvc_opal_hvsi_tiocmset(struct hvc_struct *hp, unsigned int set, + unsigned int clear) +{ + struct hvc_opal_priv *pv = hvc_opal_privs[hp->vtermno]; + + pr_devel("HVSI@%x: Set modem control, set=%x,clr=%x\n", + hp->vtermno, set, clear); + + if (set & TIOCM_DTR) + hvsilib_write_mctrl(&pv->hvsi, 1); + else if (clear & TIOCM_DTR) + hvsilib_write_mctrl(&pv->hvsi, 0); + + return 0; +} + +static const struct hv_ops hvc_opal_hvsi_ops = { + .get_chars = hvc_opal_hvsi_get_chars, + .put_chars = hvc_opal_hvsi_put_chars, + .flush = opal_flush_chars, + .notifier_add = hvc_opal_hvsi_open, + .notifier_del = hvc_opal_hvsi_close, + .notifier_hangup = hvc_opal_hvsi_hangup, + .tiocmget = hvc_opal_hvsi_tiocmget, + .tiocmset = hvc_opal_hvsi_tiocmset, +}; + +static int hvc_opal_probe(struct platform_device *dev) +{ + const struct hv_ops *ops; + struct hvc_struct *hp; + struct hvc_opal_priv *pv; + hv_protocol_t proto; + unsigned int termno, irq, boot = 0; + const __be32 *reg; + + if (of_device_is_compatible(dev->dev.of_node, "ibm,opal-console-raw")) { + proto = HV_PROTOCOL_RAW; + ops = &hvc_opal_raw_ops; + } else if (of_device_is_compatible(dev->dev.of_node, + "ibm,opal-console-hvsi")) { + proto = HV_PROTOCOL_HVSI; + ops = &hvc_opal_hvsi_ops; + } else { + pr_err("hvc_opal: Unknown protocol for %pOF\n", + dev->dev.of_node); + return -ENXIO; + } + + reg = of_get_property(dev->dev.of_node, "reg", NULL); + termno = reg ? be32_to_cpup(reg) : 0; + + /* Is it our boot one ? */ + if (hvc_opal_privs[termno] == &hvc_opal_boot_priv) { + pv = hvc_opal_privs[termno]; + boot = 1; + } else if (hvc_opal_privs[termno] == NULL) { + pv = kzalloc(sizeof(struct hvc_opal_priv), GFP_KERNEL); + if (!pv) + return -ENOMEM; + pv->proto = proto; + hvc_opal_privs[termno] = pv; + if (proto == HV_PROTOCOL_HVSI) { + /* + * We want put_chars to be atomic to avoid mangling of + * hvsi packets. + */ + hvsilib_init(&pv->hvsi, + opal_get_chars, opal_put_chars_atomic, + termno, 0); + } + + /* Instanciate now to establish a mapping index==vtermno */ + hvc_instantiate(termno, termno, ops); + } else { + pr_err("hvc_opal: Device %pOF has duplicate terminal number #%d\n", + dev->dev.of_node, termno); + return -ENXIO; + } + + pr_info("hvc%d: %s protocol on %pOF%s\n", termno, + proto == HV_PROTOCOL_RAW ? "raw" : "hvsi", + dev->dev.of_node, + boot ? " (boot console)" : ""); + + irq = irq_of_parse_and_map(dev->dev.of_node, 0); + if (!irq) { + pr_info("hvc%d: No interrupts property, using OPAL event\n", + termno); + irq = opal_event_request(ilog2(OPAL_EVENT_CONSOLE_INPUT)); + } + + if (!irq) { + pr_err("hvc_opal: Unable to map interrupt for device %pOF\n", + dev->dev.of_node); + return irq; + } + + hp = hvc_alloc(termno, irq, ops, MAX_VIO_PUT_CHARS); + if (IS_ERR(hp)) + return PTR_ERR(hp); + + /* hvc consoles on powernv may need to share a single irq */ + hp->flags = IRQF_SHARED; + dev_set_drvdata(&dev->dev, hp); + + return 0; +} + +static int hvc_opal_remove(struct platform_device *dev) +{ + struct hvc_struct *hp = dev_get_drvdata(&dev->dev); + int rc, termno; + + termno = hp->vtermno; + rc = hvc_remove(hp); + if (rc == 0) { + if (hvc_opal_privs[termno] != &hvc_opal_boot_priv) + kfree(hvc_opal_privs[termno]); + hvc_opal_privs[termno] = NULL; + } + return rc; +} + +static struct platform_driver hvc_opal_driver = { + .probe = hvc_opal_probe, + .remove = hvc_opal_remove, + .driver = { + .name = hvc_opal_name, + .of_match_table = hvc_opal_match, + } +}; + +static int __init hvc_opal_init(void) +{ + if (!firmware_has_feature(FW_FEATURE_OPAL)) + return -ENODEV; + + /* Register as a vio device to receive callbacks */ + return platform_driver_register(&hvc_opal_driver); +} +device_initcall(hvc_opal_init); + +static void udbg_opal_putc(char c) +{ + unsigned int termno = hvc_opal_boot_termno; + int count = -1; + + if (c == '\n') + udbg_opal_putc('\r'); + + do { + switch(hvc_opal_boot_priv.proto) { + case HV_PROTOCOL_RAW: + count = opal_put_chars(termno, &c, 1); + break; + case HV_PROTOCOL_HVSI: + count = hvc_opal_hvsi_put_chars(termno, &c, 1); + break; + } + + /* This is needed for the cosole to flush + * when there aren't any interrupts. + */ + opal_flush_console(termno); + } while(count == 0 || count == -EAGAIN); +} + +static int udbg_opal_getc_poll(void) +{ + unsigned int termno = hvc_opal_boot_termno; + int rc = 0; + char c; + + switch(hvc_opal_boot_priv.proto) { + case HV_PROTOCOL_RAW: + rc = opal_get_chars(termno, &c, 1); + break; + case HV_PROTOCOL_HVSI: + rc = hvc_opal_hvsi_get_chars(termno, &c, 1); + break; + } + if (!rc) + return -1; + return c; +} + +static int udbg_opal_getc(void) +{ + int ch; + for (;;) { + ch = udbg_opal_getc_poll(); + if (ch != -1) + return ch; + } +} + +static void udbg_init_opal_common(void) +{ + udbg_putc = udbg_opal_putc; + udbg_getc = udbg_opal_getc; + udbg_getc_poll = udbg_opal_getc_poll; +} + +void __init hvc_opal_init_early(void) +{ + struct device_node *stdout_node = of_node_get(of_stdout); + const __be32 *termno; + const struct hv_ops *ops; + u32 index; + + /* If the console wasn't in /chosen, try /ibm,opal */ + if (!stdout_node) { + struct device_node *opal, *np; + + /* Current OPAL takeover doesn't provide the stdout + * path, so we hard wire it + */ + opal = of_find_node_by_path("/ibm,opal/consoles"); + if (opal) + pr_devel("hvc_opal: Found consoles in new location\n"); + if (!opal) { + opal = of_find_node_by_path("/ibm,opal"); + if (opal) + pr_devel("hvc_opal: " + "Found consoles in old location\n"); + } + if (!opal) + return; + for_each_child_of_node(opal, np) { + if (of_node_name_eq(np, "serial")) { + stdout_node = np; + break; + } + } + of_node_put(opal); + } + if (!stdout_node) + return; + termno = of_get_property(stdout_node, "reg", NULL); + index = termno ? be32_to_cpup(termno) : 0; + if (index >= MAX_NR_HVC_CONSOLES) + return; + hvc_opal_privs[index] = &hvc_opal_boot_priv; + + /* Check the protocol */ + if (of_device_is_compatible(stdout_node, "ibm,opal-console-raw")) { + hvc_opal_boot_priv.proto = HV_PROTOCOL_RAW; + ops = &hvc_opal_raw_ops; + pr_devel("hvc_opal: Found RAW console\n"); + } + else if (of_device_is_compatible(stdout_node,"ibm,opal-console-hvsi")) { + hvc_opal_boot_priv.proto = HV_PROTOCOL_HVSI; + ops = &hvc_opal_hvsi_ops; + hvsilib_init(&hvc_opal_boot_priv.hvsi, + opal_get_chars, opal_put_chars_atomic, + index, 1); + /* HVSI, perform the handshake now */ + hvsilib_establish(&hvc_opal_boot_priv.hvsi); + pr_devel("hvc_opal: Found HVSI console\n"); + } else + goto out; + hvc_opal_boot_termno = index; + udbg_init_opal_common(); + add_preferred_console("hvc", index, NULL); + hvc_instantiate(index, index, ops); +out: + of_node_put(stdout_node); +} + +#ifdef CONFIG_PPC_EARLY_DEBUG_OPAL_RAW +void __init udbg_init_debug_opal_raw(void) +{ + u32 index = CONFIG_PPC_EARLY_DEBUG_OPAL_VTERMNO; + hvc_opal_privs[index] = &hvc_opal_boot_priv; + hvc_opal_boot_priv.proto = HV_PROTOCOL_RAW; + hvc_opal_boot_termno = index; + udbg_init_opal_common(); +} +#endif /* CONFIG_PPC_EARLY_DEBUG_OPAL_RAW */ + +#ifdef CONFIG_PPC_EARLY_DEBUG_OPAL_HVSI +void __init udbg_init_debug_opal_hvsi(void) +{ + u32 index = CONFIG_PPC_EARLY_DEBUG_OPAL_VTERMNO; + hvc_opal_privs[index] = &hvc_opal_boot_priv; + hvc_opal_boot_termno = index; + udbg_init_opal_common(); + hvsilib_init(&hvc_opal_boot_priv.hvsi, + opal_get_chars, opal_put_chars_atomic, + index, 1); + hvsilib_establish(&hvc_opal_boot_priv.hvsi); +} +#endif /* CONFIG_PPC_EARLY_DEBUG_OPAL_HVSI */ diff --git a/drivers/tty/hvc/hvc_riscv_sbi.c b/drivers/tty/hvc/hvc_riscv_sbi.c new file mode 100644 index 000000000..31f53fa77 --- /dev/null +++ b/drivers/tty/hvc/hvc_riscv_sbi.c @@ -0,0 +1,59 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2008 David Gibson, IBM Corporation + * Copyright (C) 2012 Regents of the University of California + * Copyright (C) 2017 SiFive + */ + +#include +#include +#include +#include +#include + +#include + +#include "hvc_console.h" + +static int hvc_sbi_tty_put(uint32_t vtermno, const char *buf, int count) +{ + int i; + + for (i = 0; i < count; i++) + sbi_console_putchar(buf[i]); + + return i; +} + +static int hvc_sbi_tty_get(uint32_t vtermno, char *buf, int count) +{ + int i, c; + + for (i = 0; i < count; i++) { + c = sbi_console_getchar(); + if (c < 0) + break; + buf[i] = c; + } + + return i; +} + +static const struct hv_ops hvc_sbi_ops = { + .get_chars = hvc_sbi_tty_get, + .put_chars = hvc_sbi_tty_put, +}; + +static int __init hvc_sbi_init(void) +{ + return PTR_ERR_OR_ZERO(hvc_alloc(0, 0, &hvc_sbi_ops, 16)); +} +device_initcall(hvc_sbi_init); + +static int __init hvc_sbi_console_init(void) +{ + hvc_instantiate(0, 0, &hvc_sbi_ops); + + return 0; +} +console_initcall(hvc_sbi_console_init); diff --git a/drivers/tty/hvc/hvc_rtas.c b/drivers/tty/hvc/hvc_rtas.c new file mode 100644 index 000000000..e8b8c6454 --- /dev/null +++ b/drivers/tty/hvc/hvc_rtas.c @@ -0,0 +1,110 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * IBM RTAS driver interface to hvc_console.c + * + * (C) Copyright IBM Corporation 2001-2005 + * (C) Copyright Red Hat, Inc. 2005 + * + * Author(s): Maximino Augilar + * : Ryan S. Arnold + * : Utz Bacher + * : David Woodhouse + * + * inspired by drivers/char/hvc_console.c + * written by Anton Blanchard and Paul Mackerras + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include "hvc_console.h" + +#define hvc_rtas_cookie 0x67781e15 +struct hvc_struct *hvc_rtas_dev; + +static int rtascons_put_char_token = RTAS_UNKNOWN_SERVICE; +static int rtascons_get_char_token = RTAS_UNKNOWN_SERVICE; + +static inline int hvc_rtas_write_console(uint32_t vtermno, const char *buf, + int count) +{ + int i; + + for (i = 0; i < count; i++) { + if (rtas_call(rtascons_put_char_token, 1, 1, NULL, buf[i])) + break; + } + + return i; +} + +static int hvc_rtas_read_console(uint32_t vtermno, char *buf, int count) +{ + int i, c; + + for (i = 0; i < count; i++) { + if (rtas_call(rtascons_get_char_token, 0, 2, &c)) + break; + + buf[i] = c; + } + + return i; +} + +static const struct hv_ops hvc_rtas_get_put_ops = { + .get_chars = hvc_rtas_read_console, + .put_chars = hvc_rtas_write_console, +}; + +static int __init hvc_rtas_init(void) +{ + struct hvc_struct *hp; + + if (rtascons_put_char_token == RTAS_UNKNOWN_SERVICE) + rtascons_put_char_token = rtas_token("put-term-char"); + if (rtascons_put_char_token == RTAS_UNKNOWN_SERVICE) + return -EIO; + + if (rtascons_get_char_token == RTAS_UNKNOWN_SERVICE) + rtascons_get_char_token = rtas_token("get-term-char"); + if (rtascons_get_char_token == RTAS_UNKNOWN_SERVICE) + return -EIO; + + BUG_ON(hvc_rtas_dev); + + /* Allocate an hvc_struct for the console device we instantiated + * earlier. Save off hp so that we can return it on exit */ + hp = hvc_alloc(hvc_rtas_cookie, 0, &hvc_rtas_get_put_ops, 16); + if (IS_ERR(hp)) + return PTR_ERR(hp); + + hvc_rtas_dev = hp; + + return 0; +} +device_initcall(hvc_rtas_init); + +/* This will happen prior to module init. There is no tty at this time? */ +static int __init hvc_rtas_console_init(void) +{ + rtascons_put_char_token = rtas_token("put-term-char"); + if (rtascons_put_char_token == RTAS_UNKNOWN_SERVICE) + return -EIO; + + rtascons_get_char_token = rtas_token("get-term-char"); + if (rtascons_get_char_token == RTAS_UNKNOWN_SERVICE) + return -EIO; + + hvc_instantiate(hvc_rtas_cookie, 0, &hvc_rtas_get_put_ops); + add_preferred_console("hvc", 0, NULL); + + return 0; +} +console_initcall(hvc_rtas_console_init); diff --git a/drivers/tty/hvc/hvc_udbg.c b/drivers/tty/hvc/hvc_udbg.c new file mode 100644 index 000000000..a4c9913f7 --- /dev/null +++ b/drivers/tty/hvc/hvc_udbg.c @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * udbg interface to hvc_console.c + * + * (C) Copyright David Gibson, IBM Corporation 2008. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "hvc_console.h" + +struct hvc_struct *hvc_udbg_dev; + +static int hvc_udbg_put(uint32_t vtermno, const char *buf, int count) +{ + int i; + + for (i = 0; i < count && udbg_putc; i++) + udbg_putc(buf[i]); + + return i; +} + +static int hvc_udbg_get(uint32_t vtermno, char *buf, int count) +{ + int i, c; + + if (!udbg_getc_poll) + return 0; + + for (i = 0; i < count; i++) { + if ((c = udbg_getc_poll()) == -1) + break; + buf[i] = c; + } + + return i; +} + +static const struct hv_ops hvc_udbg_ops = { + .get_chars = hvc_udbg_get, + .put_chars = hvc_udbg_put, +}; + +static int __init hvc_udbg_init(void) +{ + struct hvc_struct *hp; + + if (!udbg_putc) + return -ENODEV; + + BUG_ON(hvc_udbg_dev); + + hp = hvc_alloc(0, 0, &hvc_udbg_ops, 16); + if (IS_ERR(hp)) + return PTR_ERR(hp); + + hvc_udbg_dev = hp; + + return 0; +} +device_initcall(hvc_udbg_init); + +static int __init hvc_udbg_console_init(void) +{ + if (!udbg_putc) + return -ENODEV; + + hvc_instantiate(0, 0, &hvc_udbg_ops); + add_preferred_console("hvc", 0, NULL); + + return 0; +} +console_initcall(hvc_udbg_console_init); diff --git a/drivers/tty/hvc/hvc_vio.c b/drivers/tty/hvc/hvc_vio.c new file mode 100644 index 000000000..7af54d6ed --- /dev/null +++ b/drivers/tty/hvc/hvc_vio.c @@ -0,0 +1,473 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * vio driver interface to hvc_console.c + * + * This code was moved here to allow the remaining code to be reused as a + * generic polling mode with semi-reliable transport driver core to the + * console and tty subsystems. + * + * + * Copyright (C) 2001 Anton Blanchard , IBM + * Copyright (C) 2001 Paul Mackerras , IBM + * Copyright (C) 2004 Benjamin Herrenschmidt , IBM Corp. + * Copyright (C) 2004 IBM Corporation + * + * Additional Author(s): + * Ryan S. Arnold + * + * TODO: + * + * - handle error in sending hvsi protocol packets + * - retry nego on subsequent sends ? + */ + +#undef DEBUG + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "hvc_console.h" + +static const char hvc_driver_name[] = "hvc_console"; + +static const struct vio_device_id hvc_driver_table[] = { + {"serial", "hvterm1"}, +#ifndef HVC_OLD_HVSI + {"serial", "hvterm-protocol"}, +#endif + { "", "" } +}; + +typedef enum hv_protocol { + HV_PROTOCOL_RAW, + HV_PROTOCOL_HVSI +} hv_protocol_t; + +struct hvterm_priv { + u32 termno; /* HV term number */ + hv_protocol_t proto; /* Raw data or HVSI packets */ + struct hvsi_priv hvsi; /* HVSI specific data */ + spinlock_t buf_lock; + char buf[SIZE_VIO_GET_CHARS]; + int left; + int offset; +}; +static struct hvterm_priv *hvterm_privs[MAX_NR_HVC_CONSOLES]; +/* For early boot console */ +static struct hvterm_priv hvterm_priv0; + +static int hvterm_raw_get_chars(uint32_t vtermno, char *buf, int count) +{ + struct hvterm_priv *pv = hvterm_privs[vtermno]; + unsigned long i; + unsigned long flags; + int got; + + if (WARN_ON(!pv)) + return 0; + + spin_lock_irqsave(&pv->buf_lock, flags); + + if (pv->left == 0) { + pv->offset = 0; + pv->left = hvc_get_chars(pv->termno, pv->buf, count); + + /* + * Work around a HV bug where it gives us a null + * after every \r. -- paulus + */ + for (i = 1; i < pv->left; ++i) { + if (pv->buf[i] == 0 && pv->buf[i-1] == '\r') { + --pv->left; + if (i < pv->left) { + memmove(&pv->buf[i], &pv->buf[i+1], + pv->left - i); + } + } + } + } + + got = min(count, pv->left); + memcpy(buf, &pv->buf[pv->offset], got); + pv->offset += got; + pv->left -= got; + + spin_unlock_irqrestore(&pv->buf_lock, flags); + + return got; +} + +/** + * hvterm_raw_put_chars: send characters to firmware for given vterm adapter + * @vtermno: The virtual terminal number. + * @buf: The characters to send. Because of the underlying hypercall in + * hvc_put_chars(), this buffer must be at least 16 bytes long, even if + * you are sending fewer chars. + * @count: number of chars to send. + */ +static int hvterm_raw_put_chars(uint32_t vtermno, const char *buf, int count) +{ + struct hvterm_priv *pv = hvterm_privs[vtermno]; + + if (WARN_ON(!pv)) + return 0; + + return hvc_put_chars(pv->termno, buf, count); +} + +static const struct hv_ops hvterm_raw_ops = { + .get_chars = hvterm_raw_get_chars, + .put_chars = hvterm_raw_put_chars, + .notifier_add = notifier_add_irq, + .notifier_del = notifier_del_irq, + .notifier_hangup = notifier_hangup_irq, +}; + +static int hvterm_hvsi_get_chars(uint32_t vtermno, char *buf, int count) +{ + struct hvterm_priv *pv = hvterm_privs[vtermno]; + + if (WARN_ON(!pv)) + return 0; + + return hvsilib_get_chars(&pv->hvsi, buf, count); +} + +static int hvterm_hvsi_put_chars(uint32_t vtermno, const char *buf, int count) +{ + struct hvterm_priv *pv = hvterm_privs[vtermno]; + + if (WARN_ON(!pv)) + return 0; + + return hvsilib_put_chars(&pv->hvsi, buf, count); +} + +static int hvterm_hvsi_open(struct hvc_struct *hp, int data) +{ + struct hvterm_priv *pv = hvterm_privs[hp->vtermno]; + int rc; + + pr_devel("HVSI@%x: open !\n", pv->termno); + + rc = notifier_add_irq(hp, data); + if (rc) + return rc; + + return hvsilib_open(&pv->hvsi, hp); +} + +static void hvterm_hvsi_close(struct hvc_struct *hp, int data) +{ + struct hvterm_priv *pv = hvterm_privs[hp->vtermno]; + + pr_devel("HVSI@%x: do close !\n", pv->termno); + + hvsilib_close(&pv->hvsi, hp); + + notifier_del_irq(hp, data); +} + +void hvterm_hvsi_hangup(struct hvc_struct *hp, int data) +{ + struct hvterm_priv *pv = hvterm_privs[hp->vtermno]; + + pr_devel("HVSI@%x: do hangup !\n", pv->termno); + + hvsilib_close(&pv->hvsi, hp); + + notifier_hangup_irq(hp, data); +} + +static int hvterm_hvsi_tiocmget(struct hvc_struct *hp) +{ + struct hvterm_priv *pv = hvterm_privs[hp->vtermno]; + + if (!pv) + return -EINVAL; + return pv->hvsi.mctrl; +} + +static int hvterm_hvsi_tiocmset(struct hvc_struct *hp, unsigned int set, + unsigned int clear) +{ + struct hvterm_priv *pv = hvterm_privs[hp->vtermno]; + + pr_devel("HVSI@%x: Set modem control, set=%x,clr=%x\n", + pv->termno, set, clear); + + if (set & TIOCM_DTR) + hvsilib_write_mctrl(&pv->hvsi, 1); + else if (clear & TIOCM_DTR) + hvsilib_write_mctrl(&pv->hvsi, 0); + + return 0; +} + +static const struct hv_ops hvterm_hvsi_ops = { + .get_chars = hvterm_hvsi_get_chars, + .put_chars = hvterm_hvsi_put_chars, + .notifier_add = hvterm_hvsi_open, + .notifier_del = hvterm_hvsi_close, + .notifier_hangup = hvterm_hvsi_hangup, + .tiocmget = hvterm_hvsi_tiocmget, + .tiocmset = hvterm_hvsi_tiocmset, +}; + +static void udbg_hvc_putc(char c) +{ + int count = -1; + unsigned char bounce_buffer[16]; + + if (!hvterm_privs[0]) + return; + + if (c == '\n') + udbg_hvc_putc('\r'); + + do { + switch(hvterm_privs[0]->proto) { + case HV_PROTOCOL_RAW: + /* + * hvterm_raw_put_chars requires at least a 16-byte + * buffer, so go via the bounce buffer + */ + bounce_buffer[0] = c; + count = hvterm_raw_put_chars(0, bounce_buffer, 1); + break; + case HV_PROTOCOL_HVSI: + count = hvterm_hvsi_put_chars(0, &c, 1); + break; + } + } while(count == 0); +} + +static int udbg_hvc_getc_poll(void) +{ + int rc = 0; + char c; + + if (!hvterm_privs[0]) + return -1; + + switch(hvterm_privs[0]->proto) { + case HV_PROTOCOL_RAW: + rc = hvterm_raw_get_chars(0, &c, 1); + break; + case HV_PROTOCOL_HVSI: + rc = hvterm_hvsi_get_chars(0, &c, 1); + break; + } + if (!rc) + return -1; + return c; +} + +static int udbg_hvc_getc(void) +{ + int ch; + + if (!hvterm_privs[0]) + return -1; + + for (;;) { + ch = udbg_hvc_getc_poll(); + if (ch == -1) { + /* This shouldn't be needed...but... */ + volatile unsigned long delay; + for (delay=0; delay < 2000000; delay++) + ; + } else { + return ch; + } + } +} + +static int hvc_vio_probe(struct vio_dev *vdev, + const struct vio_device_id *id) +{ + const struct hv_ops *ops; + struct hvc_struct *hp; + struct hvterm_priv *pv; + hv_protocol_t proto; + int i, termno = -1; + + /* probed with invalid parameters. */ + if (!vdev || !id) + return -EPERM; + + if (of_device_is_compatible(vdev->dev.of_node, "hvterm1")) { + proto = HV_PROTOCOL_RAW; + ops = &hvterm_raw_ops; + } else if (of_device_is_compatible(vdev->dev.of_node, "hvterm-protocol")) { + proto = HV_PROTOCOL_HVSI; + ops = &hvterm_hvsi_ops; + } else { + pr_err("hvc_vio: Unknown protocol for %pOF\n", vdev->dev.of_node); + return -ENXIO; + } + + pr_devel("hvc_vio_probe() device %pOF, using %s protocol\n", + vdev->dev.of_node, + proto == HV_PROTOCOL_RAW ? "raw" : "hvsi"); + + /* Is it our boot one ? */ + if (hvterm_privs[0] == &hvterm_priv0 && + vdev->unit_address == hvterm_priv0.termno) { + pv = hvterm_privs[0]; + termno = 0; + pr_devel("->boot console, using termno 0\n"); + } + /* nope, allocate a new one */ + else { + for (i = 0; i < MAX_NR_HVC_CONSOLES && termno < 0; i++) + if (!hvterm_privs[i]) + termno = i; + pr_devel("->non-boot console, using termno %d\n", termno); + if (termno < 0) + return -ENODEV; + pv = kzalloc(sizeof(struct hvterm_priv), GFP_KERNEL); + if (!pv) + return -ENOMEM; + pv->termno = vdev->unit_address; + pv->proto = proto; + spin_lock_init(&pv->buf_lock); + hvterm_privs[termno] = pv; + hvsilib_init(&pv->hvsi, hvc_get_chars, hvc_put_chars, + pv->termno, 0); + } + + hp = hvc_alloc(termno, vdev->irq, ops, MAX_VIO_PUT_CHARS); + if (IS_ERR(hp)) + return PTR_ERR(hp); + dev_set_drvdata(&vdev->dev, hp); + + /* register udbg if it's not there already for console 0 */ + if (hp->index == 0 && !udbg_putc) { + udbg_putc = udbg_hvc_putc; + udbg_getc = udbg_hvc_getc; + udbg_getc_poll = udbg_hvc_getc_poll; + } + + return 0; +} + +static struct vio_driver hvc_vio_driver = { + .id_table = hvc_driver_table, + .probe = hvc_vio_probe, + .name = hvc_driver_name, + .driver = { + .suppress_bind_attrs = true, + }, +}; + +static int __init hvc_vio_init(void) +{ + int rc; + + /* Register as a vio device to receive callbacks */ + rc = vio_register_driver(&hvc_vio_driver); + + return rc; +} +device_initcall(hvc_vio_init); /* after drivers/tty/hvc/hvc_console.c */ + +void __init hvc_vio_init_early(void) +{ + const __be32 *termno; + const struct hv_ops *ops; + + /* find the boot console from /chosen/stdout */ + /* Check if it's a virtual terminal */ + if (!of_node_name_prefix(of_stdout, "vty")) + return; + termno = of_get_property(of_stdout, "reg", NULL); + if (termno == NULL) + return; + hvterm_priv0.termno = of_read_number(termno, 1); + spin_lock_init(&hvterm_priv0.buf_lock); + hvterm_privs[0] = &hvterm_priv0; + + /* Check the protocol */ + if (of_device_is_compatible(of_stdout, "hvterm1")) { + hvterm_priv0.proto = HV_PROTOCOL_RAW; + ops = &hvterm_raw_ops; + } + else if (of_device_is_compatible(of_stdout, "hvterm-protocol")) { + hvterm_priv0.proto = HV_PROTOCOL_HVSI; + ops = &hvterm_hvsi_ops; + hvsilib_init(&hvterm_priv0.hvsi, hvc_get_chars, hvc_put_chars, + hvterm_priv0.termno, 1); + /* HVSI, perform the handshake now */ + hvsilib_establish(&hvterm_priv0.hvsi); + } else + return; + udbg_putc = udbg_hvc_putc; + udbg_getc = udbg_hvc_getc; + udbg_getc_poll = udbg_hvc_getc_poll; +#ifdef HVC_OLD_HVSI + /* When using the old HVSI driver don't register the HVC + * backend for HVSI, only do udbg + */ + if (hvterm_priv0.proto == HV_PROTOCOL_HVSI) + return; +#endif + /* Check whether the user has requested a different console. */ + if (!strstr(boot_command_line, "console=")) + add_preferred_console("hvc", 0, NULL); + hvc_instantiate(0, 0, ops); +} + +/* call this from early_init() for a working debug console on + * vterm capable LPAR machines + */ +#ifdef CONFIG_PPC_EARLY_DEBUG_LPAR +void __init udbg_init_debug_lpar(void) +{ + /* + * If we're running as a hypervisor then we definitely can't call the + * hypervisor to print debug output (we *are* the hypervisor), so don't + * register if we detect that MSR_HV=1. + */ + if (mfmsr() & MSR_HV) + return; + + hvterm_privs[0] = &hvterm_priv0; + hvterm_priv0.termno = 0; + hvterm_priv0.proto = HV_PROTOCOL_RAW; + spin_lock_init(&hvterm_priv0.buf_lock); + udbg_putc = udbg_hvc_putc; + udbg_getc = udbg_hvc_getc; + udbg_getc_poll = udbg_hvc_getc_poll; +} +#endif /* CONFIG_PPC_EARLY_DEBUG_LPAR */ + +#ifdef CONFIG_PPC_EARLY_DEBUG_LPAR_HVSI +void __init udbg_init_debug_lpar_hvsi(void) +{ + /* See comment above in udbg_init_debug_lpar() */ + if (mfmsr() & MSR_HV) + return; + + hvterm_privs[0] = &hvterm_priv0; + hvterm_priv0.termno = CONFIG_PPC_EARLY_DEBUG_HVSI_VTERMNO; + hvterm_priv0.proto = HV_PROTOCOL_HVSI; + spin_lock_init(&hvterm_priv0.buf_lock); + udbg_putc = udbg_hvc_putc; + udbg_getc = udbg_hvc_getc; + udbg_getc_poll = udbg_hvc_getc_poll; + hvsilib_init(&hvterm_priv0.hvsi, hvc_get_chars, hvc_put_chars, + hvterm_priv0.termno, 1); + hvsilib_establish(&hvterm_priv0.hvsi); +} +#endif /* CONFIG_PPC_EARLY_DEBUG_LPAR_HVSI */ diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c new file mode 100644 index 000000000..cf0fb650a --- /dev/null +++ b/drivers/tty/hvc/hvc_xen.c @@ -0,0 +1,758 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * xen console driver interface to hvc_console.c + * + * (c) 2007 Gerd Hoffmann + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "hvc_console.h" + +#define HVC_COOKIE 0x58656e /* "Xen" in hex */ + +struct xencons_info { + struct list_head list; + struct xenbus_device *xbdev; + struct xencons_interface *intf; + unsigned int evtchn; + XENCONS_RING_IDX out_cons; + unsigned int out_cons_same; + struct hvc_struct *hvc; + int irq; + int vtermno; + grant_ref_t gntref; +}; + +static LIST_HEAD(xenconsoles); +static DEFINE_SPINLOCK(xencons_lock); + +/* ------------------------------------------------------------------ */ + +static struct xencons_info *vtermno_to_xencons(int vtermno) +{ + struct xencons_info *entry, *ret = NULL; + unsigned long flags; + + spin_lock_irqsave(&xencons_lock, flags); + if (list_empty(&xenconsoles)) { + spin_unlock_irqrestore(&xencons_lock, flags); + return NULL; + } + + list_for_each_entry(entry, &xenconsoles, list) { + if (entry->vtermno == vtermno) { + ret = entry; + break; + } + } + spin_unlock_irqrestore(&xencons_lock, flags); + + return ret; +} + +static inline int xenbus_devid_to_vtermno(int devid) +{ + return devid + HVC_COOKIE; +} + +static inline void notify_daemon(struct xencons_info *cons) +{ + /* Use evtchn: this is called early, before irq is set up. */ + notify_remote_via_evtchn(cons->evtchn); +} + +static int __write_console(struct xencons_info *xencons, + const char *data, int len) +{ + XENCONS_RING_IDX cons, prod; + struct xencons_interface *intf = xencons->intf; + int sent = 0; + + cons = intf->out_cons; + prod = intf->out_prod; + mb(); /* update queue values before going on */ + + if ((prod - cons) > sizeof(intf->out)) { + pr_err_once("xencons: Illegal ring page indices"); + return -EINVAL; + } + + while ((sent < len) && ((prod - cons) < sizeof(intf->out))) + intf->out[MASK_XENCONS_IDX(prod++, intf->out)] = data[sent++]; + + wmb(); /* write ring before updating pointer */ + intf->out_prod = prod; + + if (sent) + notify_daemon(xencons); + return sent; +} + +static int domU_write_console(uint32_t vtermno, const char *data, int len) +{ + int ret = len; + struct xencons_info *cons = vtermno_to_xencons(vtermno); + if (cons == NULL) + return -EINVAL; + + /* + * Make sure the whole buffer is emitted, polling if + * necessary. We don't ever want to rely on the hvc daemon + * because the most interesting console output is when the + * kernel is crippled. + */ + while (len) { + int sent = __write_console(cons, data, len); + + if (sent < 0) + return sent; + + data += sent; + len -= sent; + + if (unlikely(len)) + HYPERVISOR_sched_op(SCHEDOP_yield, NULL); + } + + return ret; +} + +static int domU_read_console(uint32_t vtermno, char *buf, int len) +{ + struct xencons_interface *intf; + XENCONS_RING_IDX cons, prod; + int recv = 0; + struct xencons_info *xencons = vtermno_to_xencons(vtermno); + unsigned int eoiflag = 0; + + if (xencons == NULL) + return -EINVAL; + intf = xencons->intf; + + cons = intf->in_cons; + prod = intf->in_prod; + mb(); /* get pointers before reading ring */ + + if ((prod - cons) > sizeof(intf->in)) { + pr_err_once("xencons: Illegal ring page indices"); + return -EINVAL; + } + + while (cons != prod && recv < len) + buf[recv++] = intf->in[MASK_XENCONS_IDX(cons++, intf->in)]; + + mb(); /* read ring before consuming */ + intf->in_cons = cons; + + /* + * When to mark interrupt having been spurious: + * - there was no new data to be read, and + * - the backend did not consume some output bytes, and + * - the previous round with no read data didn't see consumed bytes + * (we might have a race with an interrupt being in flight while + * updating xencons->out_cons, so account for that by allowing one + * round without any visible reason) + */ + if (intf->out_cons != xencons->out_cons) { + xencons->out_cons = intf->out_cons; + xencons->out_cons_same = 0; + } + if (recv) { + notify_daemon(xencons); + } else if (xencons->out_cons_same++ > 1) { + eoiflag = XEN_EOI_FLAG_SPURIOUS; + } + + xen_irq_lateeoi(xencons->irq, eoiflag); + + return recv; +} + +static const struct hv_ops domU_hvc_ops = { + .get_chars = domU_read_console, + .put_chars = domU_write_console, + .notifier_add = notifier_add_irq, + .notifier_del = notifier_del_irq, + .notifier_hangup = notifier_hangup_irq, +}; + +static int dom0_read_console(uint32_t vtermno, char *buf, int len) +{ + return HYPERVISOR_console_io(CONSOLEIO_read, len, buf); +} + +/* + * Either for a dom0 to write to the system console, or a domU with a + * debug version of Xen + */ +static int dom0_write_console(uint32_t vtermno, const char *str, int len) +{ + int rc = HYPERVISOR_console_io(CONSOLEIO_write, len, (char *)str); + if (rc < 0) + return rc; + + return len; +} + +static const struct hv_ops dom0_hvc_ops = { + .get_chars = dom0_read_console, + .put_chars = dom0_write_console, + .notifier_add = notifier_add_irq, + .notifier_del = notifier_del_irq, + .notifier_hangup = notifier_hangup_irq, +}; + +static int xen_hvm_console_init(void) +{ + int r; + uint64_t v = 0; + unsigned long gfn, flags; + struct xencons_info *info; + + if (!xen_hvm_domain()) + return -ENODEV; + + info = vtermno_to_xencons(HVC_COOKIE); + if (!info) { + info = kzalloc(sizeof(struct xencons_info), GFP_KERNEL); + if (!info) + return -ENOMEM; + } else if (info->intf != NULL) { + /* already configured */ + return 0; + } + /* + * If the toolstack (or the hypervisor) hasn't set these values, the + * default value is 0. Even though gfn = 0 and evtchn = 0 are + * theoretically correct values, in practice they never are and they + * mean that a legacy toolstack hasn't initialized the pv console correctly. + */ + r = hvm_get_parameter(HVM_PARAM_CONSOLE_EVTCHN, &v); + if (r < 0 || v == 0) + goto err; + info->evtchn = v; + v = 0; + r = hvm_get_parameter(HVM_PARAM_CONSOLE_PFN, &v); + if (r < 0 || v == 0) + goto err; + gfn = v; + info->intf = xen_remap(gfn << XEN_PAGE_SHIFT, XEN_PAGE_SIZE); + if (info->intf == NULL) + goto err; + info->vtermno = HVC_COOKIE; + + spin_lock_irqsave(&xencons_lock, flags); + list_add_tail(&info->list, &xenconsoles); + spin_unlock_irqrestore(&xencons_lock, flags); + + return 0; +err: + kfree(info); + return -ENODEV; +} + +static int xencons_info_pv_init(struct xencons_info *info, int vtermno) +{ + info->evtchn = xen_start_info->console.domU.evtchn; + /* GFN == MFN for PV guest */ + info->intf = gfn_to_virt(xen_start_info->console.domU.mfn); + info->vtermno = vtermno; + + list_add_tail(&info->list, &xenconsoles); + + return 0; +} + +static int xen_pv_console_init(void) +{ + struct xencons_info *info; + unsigned long flags; + + if (!xen_pv_domain()) + return -ENODEV; + + if (!xen_start_info->console.domU.evtchn) + return -ENODEV; + + info = vtermno_to_xencons(HVC_COOKIE); + if (!info) { + info = kzalloc(sizeof(struct xencons_info), GFP_KERNEL); + if (!info) + return -ENOMEM; + } else if (info->intf != NULL) { + /* already configured */ + return 0; + } + spin_lock_irqsave(&xencons_lock, flags); + xencons_info_pv_init(info, HVC_COOKIE); + spin_unlock_irqrestore(&xencons_lock, flags); + + return 0; +} + +static int xen_initial_domain_console_init(void) +{ + struct xencons_info *info; + unsigned long flags; + + if (!xen_initial_domain()) + return -ENODEV; + + info = vtermno_to_xencons(HVC_COOKIE); + if (!info) { + info = kzalloc(sizeof(struct xencons_info), GFP_KERNEL); + if (!info) + return -ENOMEM; + } + + info->irq = bind_virq_to_irq(VIRQ_CONSOLE, 0, false); + info->vtermno = HVC_COOKIE; + + spin_lock_irqsave(&xencons_lock, flags); + list_add_tail(&info->list, &xenconsoles); + spin_unlock_irqrestore(&xencons_lock, flags); + + return 0; +} + +static void xen_console_update_evtchn(struct xencons_info *info) +{ + if (xen_hvm_domain()) { + uint64_t v = 0; + int err; + + err = hvm_get_parameter(HVM_PARAM_CONSOLE_EVTCHN, &v); + if (!err && v) + info->evtchn = v; + } else + info->evtchn = xen_start_info->console.domU.evtchn; +} + +void xen_console_resume(void) +{ + struct xencons_info *info = vtermno_to_xencons(HVC_COOKIE); + if (info != NULL && info->irq) { + if (!xen_initial_domain()) + xen_console_update_evtchn(info); + rebind_evtchn_irq(info->evtchn, info->irq); + } +} + +#ifdef CONFIG_HVC_XEN_FRONTEND +static void xencons_disconnect_backend(struct xencons_info *info) +{ + if (info->hvc != NULL) + hvc_remove(info->hvc); + info->hvc = NULL; + if (info->irq > 0) { + evtchn_put(info->evtchn); + info->irq = 0; + info->evtchn = 0; + } + /* evtchn_put() will also close it so this is only an error path */ + if (info->evtchn > 0) + xenbus_free_evtchn(info->xbdev, info->evtchn); + info->evtchn = 0; + if (info->gntref > 0) + gnttab_free_grant_references(info->gntref); + info->gntref = 0; +} + +static void xencons_free(struct xencons_info *info) +{ + free_page((unsigned long)info->intf); + info->intf = NULL; + info->vtermno = 0; + kfree(info); +} + +static int xen_console_remove(struct xencons_info *info) +{ + unsigned long flags; + + xencons_disconnect_backend(info); + spin_lock_irqsave(&xencons_lock, flags); + list_del(&info->list); + spin_unlock_irqrestore(&xencons_lock, flags); + if (info->xbdev != NULL) + xencons_free(info); + else { + if (xen_hvm_domain()) + iounmap(info->intf); + kfree(info); + } + return 0; +} + +static int xencons_remove(struct xenbus_device *dev) +{ + return xen_console_remove(dev_get_drvdata(&dev->dev)); +} + +static int xencons_connect_backend(struct xenbus_device *dev, + struct xencons_info *info) +{ + int ret, evtchn, devid, ref, irq; + struct xenbus_transaction xbt; + grant_ref_t gref_head; + + ret = xenbus_alloc_evtchn(dev, &evtchn); + if (ret) + return ret; + info->evtchn = evtchn; + irq = bind_interdomain_evtchn_to_irq_lateeoi(dev->otherend_id, evtchn); + if (irq < 0) + return irq; + info->irq = irq; + devid = dev->nodename[strlen(dev->nodename) - 1] - '0'; + info->hvc = hvc_alloc(xenbus_devid_to_vtermno(devid), + irq, &domU_hvc_ops, 256); + if (IS_ERR(info->hvc)) + return PTR_ERR(info->hvc); + ret = gnttab_alloc_grant_references(1, &gref_head); + if (ret < 0) + return ret; + info->gntref = gref_head; + ref = gnttab_claim_grant_reference(&gref_head); + if (ref < 0) + return ref; + gnttab_grant_foreign_access_ref(ref, info->xbdev->otherend_id, + virt_to_gfn(info->intf), 0); + + again: + ret = xenbus_transaction_start(&xbt); + if (ret) { + xenbus_dev_fatal(dev, ret, "starting transaction"); + return ret; + } + ret = xenbus_printf(xbt, dev->nodename, "ring-ref", "%d", ref); + if (ret) + goto error_xenbus; + ret = xenbus_printf(xbt, dev->nodename, "port", "%u", + evtchn); + if (ret) + goto error_xenbus; + ret = xenbus_transaction_end(xbt, 0); + if (ret) { + if (ret == -EAGAIN) + goto again; + xenbus_dev_fatal(dev, ret, "completing transaction"); + return ret; + } + + xenbus_switch_state(dev, XenbusStateInitialised); + return 0; + + error_xenbus: + xenbus_transaction_end(xbt, 1); + xenbus_dev_fatal(dev, ret, "writing xenstore"); + return ret; +} + +static int xencons_probe(struct xenbus_device *dev, + const struct xenbus_device_id *id) +{ + int ret, devid; + struct xencons_info *info; + unsigned long flags; + + devid = dev->nodename[strlen(dev->nodename) - 1] - '0'; + if (devid == 0) + return -ENODEV; + + info = kzalloc(sizeof(struct xencons_info), GFP_KERNEL); + if (!info) + return -ENOMEM; + dev_set_drvdata(&dev->dev, info); + info->xbdev = dev; + info->vtermno = xenbus_devid_to_vtermno(devid); + info->intf = (void *)__get_free_page(GFP_KERNEL | __GFP_ZERO); + if (!info->intf) + goto error_nomem; + + ret = xencons_connect_backend(dev, info); + if (ret < 0) + goto error; + spin_lock_irqsave(&xencons_lock, flags); + list_add_tail(&info->list, &xenconsoles); + spin_unlock_irqrestore(&xencons_lock, flags); + + return 0; + + error_nomem: + ret = -ENOMEM; + xenbus_dev_fatal(dev, ret, "allocating device memory"); + error: + xencons_disconnect_backend(info); + xencons_free(info); + return ret; +} + +static int xencons_resume(struct xenbus_device *dev) +{ + struct xencons_info *info = dev_get_drvdata(&dev->dev); + + xencons_disconnect_backend(info); + memset(info->intf, 0, XEN_PAGE_SIZE); + return xencons_connect_backend(dev, info); +} + +static void xencons_backend_changed(struct xenbus_device *dev, + enum xenbus_state backend_state) +{ + switch (backend_state) { + case XenbusStateReconfiguring: + case XenbusStateReconfigured: + case XenbusStateInitialising: + case XenbusStateInitialised: + case XenbusStateUnknown: + break; + + case XenbusStateInitWait: + break; + + case XenbusStateConnected: + xenbus_switch_state(dev, XenbusStateConnected); + break; + + case XenbusStateClosed: + if (dev->state == XenbusStateClosed) + break; + fallthrough; /* Missed the backend's CLOSING state */ + case XenbusStateClosing: { + struct xencons_info *info = dev_get_drvdata(&dev->dev);; + + /* + * Don't tear down the evtchn and grant ref before the other + * end has disconnected, but do stop userspace from trying + * to use the device before we allow the backend to close. + */ + if (info->hvc) { + hvc_remove(info->hvc); + info->hvc = NULL; + } + + xenbus_frontend_closed(dev); + break; + } + } +} + +static const struct xenbus_device_id xencons_ids[] = { + { "console" }, + { "" } +}; + +static struct xenbus_driver xencons_driver = { + .name = "xenconsole", + .ids = xencons_ids, + .probe = xencons_probe, + .remove = xencons_remove, + .resume = xencons_resume, + .otherend_changed = xencons_backend_changed, +}; +#endif /* CONFIG_HVC_XEN_FRONTEND */ + +static int __init xen_hvc_init(void) +{ + int r; + struct xencons_info *info; + const struct hv_ops *ops; + + if (!xen_domain()) + return -ENODEV; + + if (xen_initial_domain()) { + ops = &dom0_hvc_ops; + r = xen_initial_domain_console_init(); + if (r < 0) + goto register_fe; + info = vtermno_to_xencons(HVC_COOKIE); + } else { + ops = &domU_hvc_ops; + if (xen_hvm_domain()) + r = xen_hvm_console_init(); + else + r = xen_pv_console_init(); + if (r < 0) + goto register_fe; + + info = vtermno_to_xencons(HVC_COOKIE); + info->irq = bind_evtchn_to_irq_lateeoi(info->evtchn); + } + if (info->irq < 0) + info->irq = 0; /* NO_IRQ */ + else + irq_set_noprobe(info->irq); + + info->hvc = hvc_alloc(HVC_COOKIE, info->irq, ops, 256); + if (IS_ERR(info->hvc)) { + unsigned long flags; + + r = PTR_ERR(info->hvc); + spin_lock_irqsave(&xencons_lock, flags); + list_del(&info->list); + spin_unlock_irqrestore(&xencons_lock, flags); + if (info->irq) + evtchn_put(info->evtchn); + kfree(info); + return r; + } + + r = 0; + register_fe: +#ifdef CONFIG_HVC_XEN_FRONTEND + r = xenbus_register_frontend(&xencons_driver); +#endif + return r; +} +device_initcall(xen_hvc_init); + +static int xen_cons_init(void) +{ + const struct hv_ops *ops; + + if (!xen_domain()) + return 0; + + if (xen_initial_domain()) + ops = &dom0_hvc_ops; + else { + int r; + ops = &domU_hvc_ops; + + if (xen_hvm_domain()) + r = xen_hvm_console_init(); + else + r = xen_pv_console_init(); + if (r < 0) + return r; + } + + hvc_instantiate(HVC_COOKIE, 0, ops); + return 0; +} +console_initcall(xen_cons_init); + +#ifdef CONFIG_X86 +static void xen_hvm_early_write(uint32_t vtermno, const char *str, int len) +{ + if (xen_cpuid_base()) + outsb(0xe9, str, len); +} +#else +static void xen_hvm_early_write(uint32_t vtermno, const char *str, int len) { } +#endif + +#ifdef CONFIG_EARLY_PRINTK +static int __init xenboot_console_setup(struct console *console, char *string) +{ + static struct xencons_info xenboot; + + if (xen_initial_domain()) + return 0; + if (!xen_pv_domain()) + return -ENODEV; + + return xencons_info_pv_init(&xenboot, 0); +} + +static void xenboot_write_console(struct console *console, const char *string, + unsigned len) +{ + unsigned int linelen, off = 0; + const char *pos; + + if (!xen_pv_domain()) { + xen_hvm_early_write(0, string, len); + return; + } + + dom0_write_console(0, string, len); + + if (xen_initial_domain()) + return; + + domU_write_console(0, "(early) ", 8); + while (off < len && NULL != (pos = strchr(string+off, '\n'))) { + linelen = pos-string+off; + if (off + linelen > len) + break; + domU_write_console(0, string+off, linelen); + domU_write_console(0, "\r\n", 2); + off += linelen + 1; + } + if (off < len) + domU_write_console(0, string+off, len-off); +} + +struct console xenboot_console = { + .name = "xenboot", + .write = xenboot_write_console, + .setup = xenboot_console_setup, + .flags = CON_PRINTBUFFER | CON_BOOT | CON_ANYTIME, + .index = -1, +}; +#endif /* CONFIG_EARLY_PRINTK */ + +void xen_raw_console_write(const char *str) +{ + ssize_t len = strlen(str); + int rc = 0; + + if (xen_domain()) { + rc = dom0_write_console(0, str, len); + if (rc != -ENOSYS || !xen_hvm_domain()) + return; + } + xen_hvm_early_write(0, str, len); +} + +void xen_raw_printk(const char *fmt, ...) +{ + static char buf[512]; + va_list ap; + + va_start(ap, fmt); + vsnprintf(buf, sizeof(buf), fmt, ap); + va_end(ap); + + xen_raw_console_write(buf); +} + +static void xenboot_earlycon_write(struct console *console, + const char *string, + unsigned len) +{ + dom0_write_console(0, string, len); +} + +static int __init xenboot_earlycon_setup(struct earlycon_device *device, + const char *opt) +{ + device->con->write = xenboot_earlycon_write; + return 0; +} +EARLYCON_DECLARE(xenboot, xenboot_earlycon_setup); diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c new file mode 100644 index 000000000..509d10428 --- /dev/null +++ b/drivers/tty/hvc/hvcs.c @@ -0,0 +1,1600 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * IBM eServer Hypervisor Virtual Console Server Device Driver + * Copyright (C) 2003, 2004 IBM Corp. + * Ryan S. Arnold (rsa@us.ibm.com) + * + * Author(s) : Ryan S. Arnold + * + * This is the device driver for the IBM Hypervisor Virtual Console Server, + * "hvcs". The IBM hvcs provides a tty driver interface to allow Linux + * user space applications access to the system consoles of logically + * partitioned operating systems, e.g. Linux, running on the same partitioned + * Power5 ppc64 system. Physical hardware consoles per partition are not + * practical on this hardware so system consoles are accessed by this driver + * using inter-partition firmware interfaces to virtual terminal devices. + * + * A vty is known to the HMC as a "virtual serial server adapter". It is a + * virtual terminal device that is created by firmware upon partition creation + * to act as a partitioned OS's console device. + * + * Firmware dynamically (via hotplug) exposes vty-servers to a running ppc64 + * Linux system upon their creation by the HMC or their exposure during boot. + * The non-user interactive backend of this driver is implemented as a vio + * device driver so that it can receive notification of vty-server lifetimes + * after it registers with the vio bus to handle vty-server probe and remove + * callbacks. + * + * Many vty-servers can be configured to connect to one vty, but a vty can + * only be actively connected to by a single vty-server, in any manner, at one + * time. If the HMC is currently hosting the console for a target Linux + * partition; attempts to open the tty device to the partition's console using + * the hvcs on any partition will return -EBUSY with every open attempt until + * the HMC frees the connection between its vty-server and the desired + * partition's vty device. Conversely, a vty-server may only be connected to + * a single vty at one time even though it may have several configured vty + * partner possibilities. + * + * Firmware does not provide notification of vty partner changes to this + * driver. This means that an HMC Super Admin may add or remove partner vtys + * from a vty-server's partner list but the changes will not be signaled to + * the vty-server. Firmware only notifies the driver when a vty-server is + * added or removed from the system. To compensate for this deficiency, this + * driver implements a sysfs update attribute which provides a method for + * rescanning partner information upon a user's request. + * + * Each vty-server, prior to being exposed to this driver is reference counted + * using the 2.6 Linux kernel kref construct. + * + * For direction on installation and usage of this driver please reference + * Documentation/powerpc/hvcs.rst. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * 1.3.0 -> 1.3.1 In hvcs_open memset(..,0x00,..) instead of memset(..,0x3F,00). + * Removed braces around single statements following conditionals. Removed '= + * 0' after static int declarations since these default to zero. Removed + * list_for_each_safe() and replaced with list_for_each_entry() in + * hvcs_get_by_index(). The 'safe' version is un-needed now that the driver is + * using spinlocks. Changed spin_lock_irqsave() to spin_lock() when locking + * hvcs_structs_lock and hvcs_pi_lock since these are not touched in an int + * handler. Initialized hvcs_structs_lock and hvcs_pi_lock to + * SPIN_LOCK_UNLOCKED at declaration time rather than in hvcs_module_init(). + * Added spin_lock around list_del() in destroy_hvcs_struct() to protect the + * list traversals from a deletion. Removed '= NULL' from pointer declaration + * statements since they are initialized NULL by default. Removed wmb() + * instances from hvcs_try_write(). They probably aren't needed with locking in + * place. Added check and cleanup for hvcs_pi_buff = kmalloc() in + * hvcs_module_init(). Exposed hvcs_struct.index via a sysfs attribute so that + * the coupling between /dev/hvcs* and a vty-server can be automatically + * determined. Moved kobject_put() in hvcs_open outside of the + * spin_unlock_irqrestore(). + * + * 1.3.1 -> 1.3.2 Changed method for determining hvcs_struct->index and had it + * align with how the tty layer always assigns the lowest index available. This + * change resulted in a list of ints that denotes which indexes are available. + * Device additions and removals use the new hvcs_get_index() and + * hvcs_return_index() helper functions. The list is created with + * hvsc_alloc_index_list() and it is destroyed with hvcs_free_index_list(). + * Without these fixes hotplug vty-server adapter support goes crazy with this + * driver if the user removes a vty-server adapter. Moved free_irq() outside of + * the hvcs_final_close() function in order to get it out of the spinlock. + * Rearranged hvcs_close(). Cleaned up some printks and did some housekeeping + * on the changelog. Removed local CLC_LENGTH and used HVCS_CLC_LENGTH from + * arch/powerepc/include/asm/hvcserver.h + * + * 1.3.2 -> 1.3.3 Replaced yield() in hvcs_close() with tty_wait_until_sent() to + * prevent possible lockup with realtime scheduling as similarly pointed out by + * akpm in hvc_console. Changed resulted in the removal of hvcs_final_close() + * to reorder cleanup operations and prevent discarding of pending data during + * an hvcs_close(). Removed spinlock protection of hvcs_struct data members in + * hvcs_write_room() and hvcs_chars_in_buffer() because they aren't needed. + */ + +#define HVCS_DRIVER_VERSION "1.3.3" + +MODULE_AUTHOR("Ryan S. Arnold "); +MODULE_DESCRIPTION("IBM hvcs (Hypervisor Virtual Console Server) Driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(HVCS_DRIVER_VERSION); + +/* + * Wait this long per iteration while trying to push buffered data to the + * hypervisor before allowing the tty to complete a close operation. + */ +#define HVCS_CLOSE_WAIT (HZ/100) /* 1/10 of a second */ + +/* + * Since the Linux TTY code does not currently (2-04-2004) support dynamic + * addition of tty derived devices and we shouldn't allocate thousands of + * tty_device pointers when the number of vty-server & vty partner connections + * will most often be much lower than this, we'll arbitrarily allocate + * HVCS_DEFAULT_SERVER_ADAPTERS tty_structs and cdev's by default when we + * register the tty_driver. This can be overridden using an insmod parameter. + */ +#define HVCS_DEFAULT_SERVER_ADAPTERS 64 + +/* + * The user can't insmod with more than HVCS_MAX_SERVER_ADAPTERS hvcs device + * nodes as a sanity check. Theoretically there can be over 1 Billion + * vty-server & vty partner connections. + */ +#define HVCS_MAX_SERVER_ADAPTERS 1024 + +/* + * We let Linux assign us a major number and we start the minors at zero. There + * is no intuitive mapping between minor number and the target vty-server + * adapter except that each new vty-server adapter is always assigned to the + * smallest minor number available. + */ +#define HVCS_MINOR_START 0 + +/* + * The hcall interface involves putting 8 chars into each of two registers. + * We load up those 2 registers (in arch/powerpc/platforms/pseries/hvconsole.c) + * by casting char[16] to long[2]. It would work without __ALIGNED__, but a + * little (tiny) bit slower because an unaligned load is slower than aligned + * load. + */ +#define __ALIGNED__ __attribute__((__aligned__(8))) + +/* + * How much data can firmware send with each hvc_put_chars()? Maybe this + * should be moved into an architecture specific area. + */ +#define HVCS_BUFF_LEN 16 + +/* + * This is the maximum amount of data we'll let the user send us (hvcs_write) at + * once in a chunk as a sanity check. + */ +#define HVCS_MAX_FROM_USER 4096 + +/* + * Be careful when adding flags to this line discipline. Don't add anything + * that will cause echoing or we'll go into recursive loop echoing chars back + * and forth with the console drivers. + */ +static const struct ktermios hvcs_tty_termios = { + .c_iflag = IGNBRK | IGNPAR, + .c_oflag = OPOST, + .c_cflag = B38400 | CS8 | CREAD | HUPCL, + .c_cc = INIT_C_CC, + .c_ispeed = 38400, + .c_ospeed = 38400 +}; + +/* + * This value is used to take the place of a command line parameter when the + * module is inserted. It starts as -1 and stays as such if the user doesn't + * specify a module insmod parameter. If they DO specify one then it is set to + * the value of the integer passed in. + */ +static int hvcs_parm_num_devs = -1; +module_param(hvcs_parm_num_devs, int, 0); + +static const char hvcs_driver_name[] = "hvcs"; +static const char hvcs_device_node[] = "hvcs"; + +/* Status of partner info rescan triggered via sysfs. */ +static int hvcs_rescan_status; + +static struct tty_driver *hvcs_tty_driver; + +/* + * In order to be somewhat sane this driver always associates the hvcs_struct + * index element with the numerically equal tty->index. This means that a + * hotplugged vty-server adapter will always map to the lowest index valued + * device node. If vty-servers were hotplug removed from the system and then + * new ones added the new vty-server may have the largest slot number of all + * the vty-server adapters in the partition but it may have the lowest dev node + * index of all the adapters due to the hole left by the hotplug removed + * adapter. There are a set of functions provided to get the lowest index for + * a new device as well as return the index to the list. This list is allocated + * with a number of elements equal to the number of device nodes requested when + * the module was inserted. + */ +static int *hvcs_index_list; + +/* + * How large is the list? This is kept for traversal since the list is + * dynamically created. + */ +static int hvcs_index_count; + +/* + * Used by the khvcsd to pick up I/O operations when the kernel_thread is + * already awake but potentially shifted to TASK_INTERRUPTIBLE state. + */ +static int hvcs_kicked; + +/* + * Use by the kthread construct for task operations like waking the sleeping + * thread and stopping the kthread. + */ +static struct task_struct *hvcs_task; + +/* + * We allocate this for the use of all of the hvcs_structs when they fetch + * partner info. + */ +static unsigned long *hvcs_pi_buff; + +/* Only allow one hvcs_struct to use the hvcs_pi_buff at a time. */ +static DEFINE_SPINLOCK(hvcs_pi_lock); + +/* One vty-server per hvcs_struct */ +struct hvcs_struct { + struct tty_port port; + spinlock_t lock; + + /* + * This index identifies this hvcs device as the complement to a + * specific tty index. + */ + unsigned int index; + + /* + * Used to tell the driver kernel_thread what operations need to take + * place upon this hvcs_struct instance. + */ + int todo_mask; + + /* + * This buffer is required so that when hvcs_write_room() reports that + * it can send HVCS_BUFF_LEN characters that it will buffer the full + * HVCS_BUFF_LEN characters if need be. This is essential for opost + * writes since they do not do high level buffering and expect to be + * able to send what the driver commits to sending buffering + * [e.g. tab to space conversions in n_tty.c opost()]. + */ + char buffer[HVCS_BUFF_LEN]; + int chars_in_buffer; + + /* + * Any variable below is valid before a tty is connected and + * stays valid after the tty is disconnected. These shouldn't be + * whacked until the kobject refcount reaches zero though some entries + * may be changed via sysfs initiatives. + */ + int connected; /* is the vty-server currently connected to a vty? */ + uint32_t p_unit_address; /* partner unit address */ + uint32_t p_partition_ID; /* partner partition ID */ + char p_location_code[HVCS_CLC_LENGTH + 1]; /* CLC + Null Term */ + struct list_head next; /* list management */ + struct vio_dev *vdev; +}; + +static LIST_HEAD(hvcs_structs); +static DEFINE_SPINLOCK(hvcs_structs_lock); +static DEFINE_MUTEX(hvcs_init_mutex); + +static void hvcs_unthrottle(struct tty_struct *tty); +static void hvcs_throttle(struct tty_struct *tty); +static irqreturn_t hvcs_handle_interrupt(int irq, void *dev_instance); + +static int hvcs_write(struct tty_struct *tty, + const unsigned char *buf, int count); +static int hvcs_write_room(struct tty_struct *tty); +static int hvcs_chars_in_buffer(struct tty_struct *tty); + +static int hvcs_has_pi(struct hvcs_struct *hvcsd); +static void hvcs_set_pi(struct hvcs_partner_info *pi, + struct hvcs_struct *hvcsd); +static int hvcs_get_pi(struct hvcs_struct *hvcsd); +static int hvcs_rescan_devices_list(void); + +static int hvcs_partner_connect(struct hvcs_struct *hvcsd); +static void hvcs_partner_free(struct hvcs_struct *hvcsd); + +static int hvcs_enable_device(struct hvcs_struct *hvcsd, + uint32_t unit_address, unsigned int irq, struct vio_dev *dev); + +static int hvcs_open(struct tty_struct *tty, struct file *filp); +static void hvcs_close(struct tty_struct *tty, struct file *filp); +static void hvcs_hangup(struct tty_struct * tty); + +static int hvcs_probe(struct vio_dev *dev, + const struct vio_device_id *id); +static int hvcs_remove(struct vio_dev *dev); +static int __init hvcs_module_init(void); +static void __exit hvcs_module_exit(void); +static int hvcs_initialize(void); + +#define HVCS_SCHED_READ 0x00000001 +#define HVCS_QUICK_READ 0x00000002 +#define HVCS_TRY_WRITE 0x00000004 +#define HVCS_READ_MASK (HVCS_SCHED_READ | HVCS_QUICK_READ) + +static inline struct hvcs_struct *from_vio_dev(struct vio_dev *viod) +{ + return dev_get_drvdata(&viod->dev); +} +/* The sysfs interface for the driver and devices */ + +static ssize_t hvcs_partner_vtys_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct vio_dev *viod = to_vio_dev(dev); + struct hvcs_struct *hvcsd = from_vio_dev(viod); + unsigned long flags; + int retval; + + spin_lock_irqsave(&hvcsd->lock, flags); + retval = sprintf(buf, "%X\n", hvcsd->p_unit_address); + spin_unlock_irqrestore(&hvcsd->lock, flags); + return retval; +} +static DEVICE_ATTR(partner_vtys, S_IRUGO, hvcs_partner_vtys_show, NULL); + +static ssize_t hvcs_partner_clcs_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct vio_dev *viod = to_vio_dev(dev); + struct hvcs_struct *hvcsd = from_vio_dev(viod); + unsigned long flags; + int retval; + + spin_lock_irqsave(&hvcsd->lock, flags); + retval = sprintf(buf, "%s\n", &hvcsd->p_location_code[0]); + spin_unlock_irqrestore(&hvcsd->lock, flags); + return retval; +} +static DEVICE_ATTR(partner_clcs, S_IRUGO, hvcs_partner_clcs_show, NULL); + +static ssize_t hvcs_current_vty_store(struct device *dev, struct device_attribute *attr, const char * buf, + size_t count) +{ + /* + * Don't need this feature at the present time because firmware doesn't + * yet support multiple partners. + */ + printk(KERN_INFO "HVCS: Denied current_vty change: -EPERM.\n"); + return -EPERM; +} + +static ssize_t hvcs_current_vty_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct vio_dev *viod = to_vio_dev(dev); + struct hvcs_struct *hvcsd = from_vio_dev(viod); + unsigned long flags; + int retval; + + spin_lock_irqsave(&hvcsd->lock, flags); + retval = sprintf(buf, "%s\n", &hvcsd->p_location_code[0]); + spin_unlock_irqrestore(&hvcsd->lock, flags); + return retval; +} + +static DEVICE_ATTR(current_vty, + S_IRUGO | S_IWUSR, hvcs_current_vty_show, hvcs_current_vty_store); + +static ssize_t hvcs_vterm_state_store(struct device *dev, struct device_attribute *attr, const char *buf, + size_t count) +{ + struct vio_dev *viod = to_vio_dev(dev); + struct hvcs_struct *hvcsd = from_vio_dev(viod); + unsigned long flags; + + /* writing a '0' to this sysfs entry will result in the disconnect. */ + if (simple_strtol(buf, NULL, 0) != 0) + return -EINVAL; + + spin_lock_irqsave(&hvcsd->lock, flags); + + if (hvcsd->port.count > 0) { + spin_unlock_irqrestore(&hvcsd->lock, flags); + printk(KERN_INFO "HVCS: vterm state unchanged. " + "The hvcs device node is still in use.\n"); + return -EPERM; + } + + if (hvcsd->connected == 0) { + spin_unlock_irqrestore(&hvcsd->lock, flags); + printk(KERN_INFO "HVCS: vterm state unchanged. The" + " vty-server is not connected to a vty.\n"); + return -EPERM; + } + + hvcs_partner_free(hvcsd); + printk(KERN_INFO "HVCS: Closed vty-server@%X and" + " partner vty@%X:%d connection.\n", + hvcsd->vdev->unit_address, + hvcsd->p_unit_address, + (uint32_t)hvcsd->p_partition_ID); + + spin_unlock_irqrestore(&hvcsd->lock, flags); + return count; +} + +static ssize_t hvcs_vterm_state_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct vio_dev *viod = to_vio_dev(dev); + struct hvcs_struct *hvcsd = from_vio_dev(viod); + unsigned long flags; + int retval; + + spin_lock_irqsave(&hvcsd->lock, flags); + retval = sprintf(buf, "%d\n", hvcsd->connected); + spin_unlock_irqrestore(&hvcsd->lock, flags); + return retval; +} +static DEVICE_ATTR(vterm_state, S_IRUGO | S_IWUSR, + hvcs_vterm_state_show, hvcs_vterm_state_store); + +static ssize_t hvcs_index_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct vio_dev *viod = to_vio_dev(dev); + struct hvcs_struct *hvcsd = from_vio_dev(viod); + unsigned long flags; + int retval; + + spin_lock_irqsave(&hvcsd->lock, flags); + retval = sprintf(buf, "%d\n", hvcsd->index); + spin_unlock_irqrestore(&hvcsd->lock, flags); + return retval; +} + +static DEVICE_ATTR(index, S_IRUGO, hvcs_index_show, NULL); + +static struct attribute *hvcs_attrs[] = { + &dev_attr_partner_vtys.attr, + &dev_attr_partner_clcs.attr, + &dev_attr_current_vty.attr, + &dev_attr_vterm_state.attr, + &dev_attr_index.attr, + NULL, +}; + +static struct attribute_group hvcs_attr_group = { + .attrs = hvcs_attrs, +}; + +static ssize_t rescan_show(struct device_driver *ddp, char *buf) +{ + /* A 1 means it is updating, a 0 means it is done updating */ + return snprintf(buf, PAGE_SIZE, "%d\n", hvcs_rescan_status); +} + +static ssize_t rescan_store(struct device_driver *ddp, const char * buf, + size_t count) +{ + if ((simple_strtol(buf, NULL, 0) != 1) + && (hvcs_rescan_status != 0)) + return -EINVAL; + + hvcs_rescan_status = 1; + printk(KERN_INFO "HVCS: rescanning partner info for all" + " vty-servers.\n"); + hvcs_rescan_devices_list(); + hvcs_rescan_status = 0; + return count; +} + +static DRIVER_ATTR_RW(rescan); + +static void hvcs_kick(void) +{ + hvcs_kicked = 1; + wmb(); + wake_up_process(hvcs_task); +} + +static void hvcs_unthrottle(struct tty_struct *tty) +{ + struct hvcs_struct *hvcsd = tty->driver_data; + unsigned long flags; + + spin_lock_irqsave(&hvcsd->lock, flags); + hvcsd->todo_mask |= HVCS_SCHED_READ; + spin_unlock_irqrestore(&hvcsd->lock, flags); + hvcs_kick(); +} + +static void hvcs_throttle(struct tty_struct *tty) +{ + struct hvcs_struct *hvcsd = tty->driver_data; + unsigned long flags; + + spin_lock_irqsave(&hvcsd->lock, flags); + vio_disable_interrupts(hvcsd->vdev); + spin_unlock_irqrestore(&hvcsd->lock, flags); +} + +/* + * If the device is being removed we don't have to worry about this interrupt + * handler taking any further interrupts because they are disabled which means + * the hvcs_struct will always be valid in this handler. + */ +static irqreturn_t hvcs_handle_interrupt(int irq, void *dev_instance) +{ + struct hvcs_struct *hvcsd = dev_instance; + + spin_lock(&hvcsd->lock); + vio_disable_interrupts(hvcsd->vdev); + hvcsd->todo_mask |= HVCS_SCHED_READ; + spin_unlock(&hvcsd->lock); + hvcs_kick(); + + return IRQ_HANDLED; +} + +/* This function must be called with the hvcsd->lock held */ +static void hvcs_try_write(struct hvcs_struct *hvcsd) +{ + uint32_t unit_address = hvcsd->vdev->unit_address; + struct tty_struct *tty = hvcsd->port.tty; + int sent; + + if (hvcsd->todo_mask & HVCS_TRY_WRITE) { + /* won't send partial writes */ + sent = hvc_put_chars(unit_address, + &hvcsd->buffer[0], + hvcsd->chars_in_buffer ); + if (sent > 0) { + hvcsd->chars_in_buffer = 0; + /* wmb(); */ + hvcsd->todo_mask &= ~(HVCS_TRY_WRITE); + /* wmb(); */ + + /* + * We are still obligated to deliver the data to the + * hypervisor even if the tty has been closed because + * we committed to delivering it. But don't try to wake + * a non-existent tty. + */ + if (tty) { + tty_wakeup(tty); + } + } + } +} + +static int hvcs_io(struct hvcs_struct *hvcsd) +{ + uint32_t unit_address; + struct tty_struct *tty; + char buf[HVCS_BUFF_LEN] __ALIGNED__; + unsigned long flags; + int got = 0; + + spin_lock_irqsave(&hvcsd->lock, flags); + + unit_address = hvcsd->vdev->unit_address; + tty = hvcsd->port.tty; + + hvcs_try_write(hvcsd); + + if (!tty || tty_throttled(tty)) { + hvcsd->todo_mask &= ~(HVCS_READ_MASK); + goto bail; + } else if (!(hvcsd->todo_mask & (HVCS_READ_MASK))) + goto bail; + + /* remove the read masks */ + hvcsd->todo_mask &= ~(HVCS_READ_MASK); + + if (tty_buffer_request_room(&hvcsd->port, HVCS_BUFF_LEN) >= HVCS_BUFF_LEN) { + got = hvc_get_chars(unit_address, + &buf[0], + HVCS_BUFF_LEN); + tty_insert_flip_string(&hvcsd->port, buf, got); + } + + /* Give the TTY time to process the data we just sent. */ + if (got) + hvcsd->todo_mask |= HVCS_QUICK_READ; + + spin_unlock_irqrestore(&hvcsd->lock, flags); + /* This is synch because tty->low_latency == 1 */ + if(got) + tty_flip_buffer_push(&hvcsd->port); + + if (!got) { + /* Do this _after_ the flip_buffer_push */ + spin_lock_irqsave(&hvcsd->lock, flags); + vio_enable_interrupts(hvcsd->vdev); + spin_unlock_irqrestore(&hvcsd->lock, flags); + } + + return hvcsd->todo_mask; + + bail: + spin_unlock_irqrestore(&hvcsd->lock, flags); + return hvcsd->todo_mask; +} + +static int khvcsd(void *unused) +{ + struct hvcs_struct *hvcsd; + int hvcs_todo_mask; + + __set_current_state(TASK_RUNNING); + + do { + hvcs_todo_mask = 0; + hvcs_kicked = 0; + wmb(); + + spin_lock(&hvcs_structs_lock); + list_for_each_entry(hvcsd, &hvcs_structs, next) { + hvcs_todo_mask |= hvcs_io(hvcsd); + } + spin_unlock(&hvcs_structs_lock); + + /* + * If any of the hvcs adapters want to try a write or quick read + * don't schedule(), yield a smidgen then execute the hvcs_io + * thread again for those that want the write. + */ + if (hvcs_todo_mask & (HVCS_TRY_WRITE | HVCS_QUICK_READ)) { + yield(); + continue; + } + + set_current_state(TASK_INTERRUPTIBLE); + if (!hvcs_kicked) + schedule(); + __set_current_state(TASK_RUNNING); + } while (!kthread_should_stop()); + + return 0; +} + +static const struct vio_device_id hvcs_driver_table[] = { + {"serial-server", "hvterm2"}, + { "", "" } +}; +MODULE_DEVICE_TABLE(vio, hvcs_driver_table); + +static void hvcs_return_index(int index) +{ + /* Paranoia check */ + if (!hvcs_index_list) + return; + if (index < 0 || index >= hvcs_index_count) + return; + if (hvcs_index_list[index] == -1) + return; + else + hvcs_index_list[index] = -1; +} + +static void hvcs_destruct_port(struct tty_port *p) +{ + struct hvcs_struct *hvcsd = container_of(p, struct hvcs_struct, port); + struct vio_dev *vdev; + unsigned long flags; + + spin_lock(&hvcs_structs_lock); + spin_lock_irqsave(&hvcsd->lock, flags); + + /* the list_del poisons the pointers */ + list_del(&(hvcsd->next)); + + if (hvcsd->connected == 1) { + hvcs_partner_free(hvcsd); + printk(KERN_INFO "HVCS: Closed vty-server@%X and" + " partner vty@%X:%d connection.\n", + hvcsd->vdev->unit_address, + hvcsd->p_unit_address, + (uint32_t)hvcsd->p_partition_ID); + } + printk(KERN_INFO "HVCS: Destroyed hvcs_struct for vty-server@%X.\n", + hvcsd->vdev->unit_address); + + vdev = hvcsd->vdev; + hvcsd->vdev = NULL; + + hvcsd->p_unit_address = 0; + hvcsd->p_partition_ID = 0; + hvcs_return_index(hvcsd->index); + memset(&hvcsd->p_location_code[0], 0x00, HVCS_CLC_LENGTH + 1); + + spin_unlock_irqrestore(&hvcsd->lock, flags); + spin_unlock(&hvcs_structs_lock); + + sysfs_remove_group(&vdev->dev.kobj, &hvcs_attr_group); + + kfree(hvcsd); +} + +static const struct tty_port_operations hvcs_port_ops = { + .destruct = hvcs_destruct_port, +}; + +static int hvcs_get_index(void) +{ + int i; + /* Paranoia check */ + if (!hvcs_index_list) { + printk(KERN_ERR "HVCS: hvcs_index_list NOT valid!.\n"); + return -EFAULT; + } + /* Find the numerically lowest first free index. */ + for(i = 0; i < hvcs_index_count; i++) { + if (hvcs_index_list[i] == -1) { + hvcs_index_list[i] = 0; + return i; + } + } + return -1; +} + +static int hvcs_probe( + struct vio_dev *dev, + const struct vio_device_id *id) +{ + struct hvcs_struct *hvcsd; + int index, rc; + int retval; + + if (!dev || !id) { + printk(KERN_ERR "HVCS: probed with invalid parameter.\n"); + return -EPERM; + } + + /* Make sure we are properly initialized */ + rc = hvcs_initialize(); + if (rc) { + pr_err("HVCS: Failed to initialize core driver.\n"); + return rc; + } + + /* early to avoid cleanup on failure */ + index = hvcs_get_index(); + if (index < 0) { + return -EFAULT; + } + + hvcsd = kzalloc(sizeof(*hvcsd), GFP_KERNEL); + if (!hvcsd) + return -ENODEV; + + tty_port_init(&hvcsd->port); + hvcsd->port.ops = &hvcs_port_ops; + spin_lock_init(&hvcsd->lock); + + hvcsd->vdev = dev; + dev_set_drvdata(&dev->dev, hvcsd); + + hvcsd->index = index; + + /* hvcsd->index = ++hvcs_struct_count; */ + hvcsd->chars_in_buffer = 0; + hvcsd->todo_mask = 0; + hvcsd->connected = 0; + + /* + * This will populate the hvcs_struct's partner info fields for the + * first time. + */ + if (hvcs_get_pi(hvcsd)) { + printk(KERN_ERR "HVCS: Failed to fetch partner" + " info for vty-server@%X on device probe.\n", + hvcsd->vdev->unit_address); + } + + /* + * If a user app opens a tty that corresponds to this vty-server before + * the hvcs_struct has been added to the devices list then the user app + * will get -ENODEV. + */ + spin_lock(&hvcs_structs_lock); + list_add_tail(&(hvcsd->next), &hvcs_structs); + spin_unlock(&hvcs_structs_lock); + + retval = sysfs_create_group(&dev->dev.kobj, &hvcs_attr_group); + if (retval) { + printk(KERN_ERR "HVCS: Can't create sysfs attrs for vty-server@%X\n", + hvcsd->vdev->unit_address); + return retval; + } + + printk(KERN_INFO "HVCS: vty-server@%X added to the vio bus.\n", dev->unit_address); + + /* + * DON'T enable interrupts here because there is no user to receive the + * data. + */ + return 0; +} + +static int hvcs_remove(struct vio_dev *dev) +{ + struct hvcs_struct *hvcsd = dev_get_drvdata(&dev->dev); + unsigned long flags; + struct tty_struct *tty; + + if (!hvcsd) + return -ENODEV; + + /* By this time the vty-server won't be getting any more interrupts */ + + spin_lock_irqsave(&hvcsd->lock, flags); + + tty = hvcsd->port.tty; + + spin_unlock_irqrestore(&hvcsd->lock, flags); + + /* + * Let the last holder of this object cause it to be removed, which + * would probably be tty_hangup below. + */ + tty_port_put(&hvcsd->port); + + /* + * The hangup is a scheduled function which will auto chain call + * hvcs_hangup. The tty should always be valid at this time unless a + * simultaneous tty close already cleaned up the hvcs_struct. + */ + if (tty) + tty_hangup(tty); + + printk(KERN_INFO "HVCS: vty-server@%X removed from the" + " vio bus.\n", dev->unit_address); + return 0; +}; + +static struct vio_driver hvcs_vio_driver = { + .id_table = hvcs_driver_table, + .probe = hvcs_probe, + .remove = hvcs_remove, + .name = hvcs_driver_name, +}; + +/* Only called from hvcs_get_pi please */ +static void hvcs_set_pi(struct hvcs_partner_info *pi, struct hvcs_struct *hvcsd) +{ + hvcsd->p_unit_address = pi->unit_address; + hvcsd->p_partition_ID = pi->partition_ID; + + /* copy the null-term char too */ + strlcpy(hvcsd->p_location_code, pi->location_code, + sizeof(hvcsd->p_location_code)); +} + +/* + * Traverse the list and add the partner info that is found to the hvcs_struct + * struct entry. NOTE: At this time I know that partner info will return a + * single entry but in the future there may be multiple partner info entries per + * vty-server and you'll want to zero out that list and reset it. If for some + * reason you have an old version of this driver but there IS more than one + * partner info then hvcsd->p_* will hold the last partner info data from the + * firmware query. A good way to update this code would be to replace the three + * partner info fields in hvcs_struct with a list of hvcs_partner_info + * instances. + * + * This function must be called with the hvcsd->lock held. + */ +static int hvcs_get_pi(struct hvcs_struct *hvcsd) +{ + struct hvcs_partner_info *pi; + uint32_t unit_address = hvcsd->vdev->unit_address; + struct list_head head; + int retval; + + spin_lock(&hvcs_pi_lock); + if (!hvcs_pi_buff) { + spin_unlock(&hvcs_pi_lock); + return -EFAULT; + } + retval = hvcs_get_partner_info(unit_address, &head, hvcs_pi_buff); + spin_unlock(&hvcs_pi_lock); + if (retval) { + printk(KERN_ERR "HVCS: Failed to fetch partner" + " info for vty-server@%x.\n", unit_address); + return retval; + } + + /* nixes the values if the partner vty went away */ + hvcsd->p_unit_address = 0; + hvcsd->p_partition_ID = 0; + + list_for_each_entry(pi, &head, node) + hvcs_set_pi(pi, hvcsd); + + hvcs_free_partner_info(&head); + return 0; +} + +/* + * This function is executed by the driver "rescan" sysfs entry. It shouldn't + * be executed elsewhere, in order to prevent deadlock issues. + */ +static int hvcs_rescan_devices_list(void) +{ + struct hvcs_struct *hvcsd; + unsigned long flags; + + spin_lock(&hvcs_structs_lock); + + list_for_each_entry(hvcsd, &hvcs_structs, next) { + spin_lock_irqsave(&hvcsd->lock, flags); + hvcs_get_pi(hvcsd); + spin_unlock_irqrestore(&hvcsd->lock, flags); + } + + spin_unlock(&hvcs_structs_lock); + + return 0; +} + +/* + * Farm this off into its own function because it could be more complex once + * multiple partners support is added. This function should be called with + * the hvcsd->lock held. + */ +static int hvcs_has_pi(struct hvcs_struct *hvcsd) +{ + if ((!hvcsd->p_unit_address) || (!hvcsd->p_partition_ID)) + return 0; + return 1; +} + +/* + * NOTE: It is possible that the super admin removed a partner vty and then + * added a different vty as the new partner. + * + * This function must be called with the hvcsd->lock held. + */ +static int hvcs_partner_connect(struct hvcs_struct *hvcsd) +{ + int retval; + unsigned int unit_address = hvcsd->vdev->unit_address; + + /* + * If there wasn't any pi when the device was added it doesn't meant + * there isn't any now. This driver isn't notified when a new partner + * vty is added to a vty-server so we discover changes on our own. + * Please see comments in hvcs_register_connection() for justification + * of this bizarre code. + */ + retval = hvcs_register_connection(unit_address, + hvcsd->p_partition_ID, + hvcsd->p_unit_address); + if (!retval) { + hvcsd->connected = 1; + return 0; + } else if (retval != -EINVAL) + return retval; + + /* + * As per the spec re-get the pi and try again if -EINVAL after the + * first connection attempt. + */ + if (hvcs_get_pi(hvcsd)) + return -ENOMEM; + + if (!hvcs_has_pi(hvcsd)) + return -ENODEV; + + retval = hvcs_register_connection(unit_address, + hvcsd->p_partition_ID, + hvcsd->p_unit_address); + if (retval != -EINVAL) { + hvcsd->connected = 1; + return retval; + } + + /* + * EBUSY is the most likely scenario though the vty could have been + * removed or there really could be an hcall error due to the parameter + * data but thanks to ambiguous firmware return codes we can't really + * tell. + */ + printk(KERN_INFO "HVCS: vty-server or partner" + " vty is busy. Try again later.\n"); + return -EBUSY; +} + +/* This function must be called with the hvcsd->lock held */ +static void hvcs_partner_free(struct hvcs_struct *hvcsd) +{ + int retval; + do { + retval = hvcs_free_connection(hvcsd->vdev->unit_address); + } while (retval == -EBUSY); + hvcsd->connected = 0; +} + +/* This helper function must be called WITHOUT the hvcsd->lock held */ +static int hvcs_enable_device(struct hvcs_struct *hvcsd, uint32_t unit_address, + unsigned int irq, struct vio_dev *vdev) +{ + unsigned long flags; + int rc; + + /* + * It is possible that the vty-server was removed between the time that + * the conn was registered and now. + */ + rc = request_irq(irq, &hvcs_handle_interrupt, 0, "ibmhvcs", hvcsd); + if (!rc) { + /* + * It is possible the vty-server was removed after the irq was + * requested but before we have time to enable interrupts. + */ + if (vio_enable_interrupts(vdev) == H_SUCCESS) + return 0; + else { + printk(KERN_ERR "HVCS: int enable failed for" + " vty-server@%X.\n", unit_address); + free_irq(irq, hvcsd); + } + } else + printk(KERN_ERR "HVCS: irq req failed for" + " vty-server@%X.\n", unit_address); + + spin_lock_irqsave(&hvcsd->lock, flags); + hvcs_partner_free(hvcsd); + spin_unlock_irqrestore(&hvcsd->lock, flags); + + return rc; + +} + +/* + * This always increments the kref ref count if the call is successful. + * Please remember to dec when you are done with the instance. + * + * NOTICE: Do NOT hold either the hvcs_struct.lock or hvcs_structs_lock when + * calling this function or you will get deadlock. + */ +static struct hvcs_struct *hvcs_get_by_index(int index) +{ + struct hvcs_struct *hvcsd; + unsigned long flags; + + spin_lock(&hvcs_structs_lock); + list_for_each_entry(hvcsd, &hvcs_structs, next) { + spin_lock_irqsave(&hvcsd->lock, flags); + if (hvcsd->index == index) { + tty_port_get(&hvcsd->port); + spin_unlock_irqrestore(&hvcsd->lock, flags); + spin_unlock(&hvcs_structs_lock); + return hvcsd; + } + spin_unlock_irqrestore(&hvcsd->lock, flags); + } + spin_unlock(&hvcs_structs_lock); + + return NULL; +} + +static int hvcs_install(struct tty_driver *driver, struct tty_struct *tty) +{ + struct hvcs_struct *hvcsd; + struct vio_dev *vdev; + unsigned long unit_address, flags; + unsigned int irq; + int retval; + + /* + * Is there a vty-server that shares the same index? + * This function increments the kref index. + */ + hvcsd = hvcs_get_by_index(tty->index); + if (!hvcsd) { + printk(KERN_WARNING "HVCS: open failed, no device associated" + " with tty->index %d.\n", tty->index); + return -ENODEV; + } + + spin_lock_irqsave(&hvcsd->lock, flags); + + if (hvcsd->connected == 0) { + retval = hvcs_partner_connect(hvcsd); + if (retval) { + spin_unlock_irqrestore(&hvcsd->lock, flags); + printk(KERN_WARNING "HVCS: partner connect failed.\n"); + goto err_put; + } + } + + hvcsd->port.count = 0; + hvcsd->port.tty = tty; + tty->driver_data = hvcsd; + + memset(&hvcsd->buffer[0], 0x00, HVCS_BUFF_LEN); + + /* + * Save these in the spinlock for the enable operations that need them + * outside of the spinlock. + */ + irq = hvcsd->vdev->irq; + vdev = hvcsd->vdev; + unit_address = hvcsd->vdev->unit_address; + + hvcsd->todo_mask |= HVCS_SCHED_READ; + spin_unlock_irqrestore(&hvcsd->lock, flags); + + /* + * This must be done outside of the spinlock because it requests irqs + * and will grab the spinlock and free the connection if it fails. + */ + retval = hvcs_enable_device(hvcsd, unit_address, irq, vdev); + if (retval) { + printk(KERN_WARNING "HVCS: enable device failed.\n"); + goto err_put; + } + + retval = tty_port_install(&hvcsd->port, driver, tty); + if (retval) + goto err_irq; + + return 0; +err_irq: + spin_lock_irqsave(&hvcsd->lock, flags); + vio_disable_interrupts(hvcsd->vdev); + spin_unlock_irqrestore(&hvcsd->lock, flags); + free_irq(irq, hvcsd); +err_put: + tty_port_put(&hvcsd->port); + + return retval; +} + +/* + * This is invoked via the tty_open interface when a user app connects to the + * /dev node. + */ +static int hvcs_open(struct tty_struct *tty, struct file *filp) +{ + struct hvcs_struct *hvcsd = tty->driver_data; + unsigned long flags; + + spin_lock_irqsave(&hvcsd->lock, flags); + hvcsd->port.count++; + hvcsd->todo_mask |= HVCS_SCHED_READ; + spin_unlock_irqrestore(&hvcsd->lock, flags); + + hvcs_kick(); + + printk(KERN_INFO "HVCS: vty-server@%X connection opened.\n", + hvcsd->vdev->unit_address ); + + return 0; +} + +static void hvcs_close(struct tty_struct *tty, struct file *filp) +{ + struct hvcs_struct *hvcsd; + unsigned long flags; + int irq; + + /* + * Is someone trying to close the file associated with this device after + * we have hung up? If so tty->driver_data wouldn't be valid. + */ + if (tty_hung_up_p(filp)) + return; + + /* + * No driver_data means that this close was probably issued after a + * failed hvcs_open by the tty layer's release_dev() api and we can just + * exit cleanly. + */ + if (!tty->driver_data) + return; + + hvcsd = tty->driver_data; + + spin_lock_irqsave(&hvcsd->lock, flags); + if (--hvcsd->port.count == 0) { + + vio_disable_interrupts(hvcsd->vdev); + + /* + * NULL this early so that the kernel_thread doesn't try to + * execute any operations on the TTY even though it is obligated + * to deliver any pending I/O to the hypervisor. + */ + hvcsd->port.tty = NULL; + + irq = hvcsd->vdev->irq; + spin_unlock_irqrestore(&hvcsd->lock, flags); + + tty_wait_until_sent(tty, HVCS_CLOSE_WAIT); + + free_irq(irq, hvcsd); + return; + } else if (hvcsd->port.count < 0) { + printk(KERN_ERR "HVCS: vty-server@%X open_count: %d is mismanaged.\n", + hvcsd->vdev->unit_address, hvcsd->port.count); + } + + spin_unlock_irqrestore(&hvcsd->lock, flags); +} + +static void hvcs_cleanup(struct tty_struct * tty) +{ + struct hvcs_struct *hvcsd = tty->driver_data; + + /* + * This line is important because it tells hvcs_open that this + * device needs to be re-configured the next time hvcs_open is + * called. + */ + tty->driver_data = NULL; + + tty_port_put(&hvcsd->port); +} + +static void hvcs_hangup(struct tty_struct * tty) +{ + struct hvcs_struct *hvcsd = tty->driver_data; + unsigned long flags; + int temp_open_count; + int irq; + + spin_lock_irqsave(&hvcsd->lock, flags); + /* Preserve this so that we know how many kref refs to put */ + temp_open_count = hvcsd->port.count; + + /* + * Don't kref put inside the spinlock because the destruction + * callback may use the spinlock and it may get called before the + * spinlock has been released. + */ + vio_disable_interrupts(hvcsd->vdev); + + hvcsd->todo_mask = 0; + + /* I don't think the tty needs the hvcs_struct pointer after a hangup */ + tty->driver_data = NULL; + hvcsd->port.tty = NULL; + + hvcsd->port.count = 0; + + /* This will drop any buffered data on the floor which is OK in a hangup + * scenario. */ + memset(&hvcsd->buffer[0], 0x00, HVCS_BUFF_LEN); + hvcsd->chars_in_buffer = 0; + + irq = hvcsd->vdev->irq; + + spin_unlock_irqrestore(&hvcsd->lock, flags); + + free_irq(irq, hvcsd); + + /* + * We need to kref_put() for every open_count we have since the + * tty_hangup() function doesn't invoke a close per open connection on a + * non-console device. + */ + while(temp_open_count) { + --temp_open_count; + /* + * The final put will trigger destruction of the hvcs_struct. + * NOTE: If this hangup was signaled from user space then the + * final put will never happen. + */ + tty_port_put(&hvcsd->port); + } +} + +/* + * NOTE: This is almost always from_user since user level apps interact with the + * /dev nodes. I'm trusting that if hvcs_write gets called and interrupted by + * hvcs_remove (which removes the target device and executes tty_hangup()) that + * tty_hangup will allow hvcs_write time to complete execution before it + * terminates our device. + */ +static int hvcs_write(struct tty_struct *tty, + const unsigned char *buf, int count) +{ + struct hvcs_struct *hvcsd = tty->driver_data; + unsigned int unit_address; + const unsigned char *charbuf; + unsigned long flags; + int total_sent = 0; + int tosend = 0; + int result = 0; + + /* + * If they don't check the return code off of their open they may + * attempt this even if there is no connected device. + */ + if (!hvcsd) + return -ENODEV; + + /* Reasonable size to prevent user level flooding */ + if (count > HVCS_MAX_FROM_USER) { + printk(KERN_WARNING "HVCS write: count being truncated to" + " HVCS_MAX_FROM_USER.\n"); + count = HVCS_MAX_FROM_USER; + } + + charbuf = buf; + + spin_lock_irqsave(&hvcsd->lock, flags); + + /* + * Somehow an open succeeded but the device was removed or the + * connection terminated between the vty-server and partner vty during + * the middle of a write operation? This is a crummy place to do this + * but we want to keep it all in the spinlock. + */ + if (hvcsd->port.count <= 0) { + spin_unlock_irqrestore(&hvcsd->lock, flags); + return -ENODEV; + } + + unit_address = hvcsd->vdev->unit_address; + + while (count > 0) { + tosend = min(count, (HVCS_BUFF_LEN - hvcsd->chars_in_buffer)); + /* + * No more space, this probably means that the last call to + * hvcs_write() didn't succeed and the buffer was filled up. + */ + if (!tosend) + break; + + memcpy(&hvcsd->buffer[hvcsd->chars_in_buffer], + &charbuf[total_sent], + tosend); + + hvcsd->chars_in_buffer += tosend; + + result = 0; + + /* + * If this is true then we don't want to try writing to the + * hypervisor because that is the kernel_threads job now. We'll + * just add to the buffer. + */ + if (!(hvcsd->todo_mask & HVCS_TRY_WRITE)) + /* won't send partial writes */ + result = hvc_put_chars(unit_address, + &hvcsd->buffer[0], + hvcsd->chars_in_buffer); + + /* + * Since we know we have enough room in hvcsd->buffer for + * tosend we record that it was sent regardless of whether the + * hypervisor actually took it because we have it buffered. + */ + total_sent+=tosend; + count-=tosend; + if (result == 0) { + hvcsd->todo_mask |= HVCS_TRY_WRITE; + hvcs_kick(); + break; + } + + hvcsd->chars_in_buffer = 0; + /* + * Test after the chars_in_buffer reset otherwise this could + * deadlock our writes if hvc_put_chars fails. + */ + if (result < 0) + break; + } + + spin_unlock_irqrestore(&hvcsd->lock, flags); + + if (result == -1) + return -EIO; + else + return total_sent; +} + +/* + * This is really asking how much can we guarantee that we can send or that we + * absolutely WILL BUFFER if we can't send it. This driver MUST honor the + * return value, hence the reason for hvcs_struct buffering. + */ +static int hvcs_write_room(struct tty_struct *tty) +{ + struct hvcs_struct *hvcsd = tty->driver_data; + + if (!hvcsd || hvcsd->port.count <= 0) + return 0; + + return HVCS_BUFF_LEN - hvcsd->chars_in_buffer; +} + +static int hvcs_chars_in_buffer(struct tty_struct *tty) +{ + struct hvcs_struct *hvcsd = tty->driver_data; + + return hvcsd->chars_in_buffer; +} + +static const struct tty_operations hvcs_ops = { + .install = hvcs_install, + .open = hvcs_open, + .close = hvcs_close, + .cleanup = hvcs_cleanup, + .hangup = hvcs_hangup, + .write = hvcs_write, + .write_room = hvcs_write_room, + .chars_in_buffer = hvcs_chars_in_buffer, + .unthrottle = hvcs_unthrottle, + .throttle = hvcs_throttle, +}; + +static int hvcs_alloc_index_list(int n) +{ + int i; + + hvcs_index_list = kmalloc_array(n, sizeof(hvcs_index_count), + GFP_KERNEL); + if (!hvcs_index_list) + return -ENOMEM; + hvcs_index_count = n; + for (i = 0; i < hvcs_index_count; i++) + hvcs_index_list[i] = -1; + return 0; +} + +static void hvcs_free_index_list(void) +{ + /* Paranoia check to be thorough. */ + kfree(hvcs_index_list); + hvcs_index_list = NULL; + hvcs_index_count = 0; +} + +static int hvcs_initialize(void) +{ + int rc, num_ttys_to_alloc; + + mutex_lock(&hvcs_init_mutex); + if (hvcs_task) { + mutex_unlock(&hvcs_init_mutex); + return 0; + } + + /* Has the user specified an overload with an insmod param? */ + if (hvcs_parm_num_devs <= 0 || + (hvcs_parm_num_devs > HVCS_MAX_SERVER_ADAPTERS)) { + num_ttys_to_alloc = HVCS_DEFAULT_SERVER_ADAPTERS; + } else + num_ttys_to_alloc = hvcs_parm_num_devs; + + hvcs_tty_driver = alloc_tty_driver(num_ttys_to_alloc); + if (!hvcs_tty_driver) { + mutex_unlock(&hvcs_init_mutex); + return -ENOMEM; + } + + if (hvcs_alloc_index_list(num_ttys_to_alloc)) { + rc = -ENOMEM; + goto index_fail; + } + + hvcs_tty_driver->driver_name = hvcs_driver_name; + hvcs_tty_driver->name = hvcs_device_node; + + /* + * We'll let the system assign us a major number, indicated by leaving + * it blank. + */ + + hvcs_tty_driver->minor_start = HVCS_MINOR_START; + hvcs_tty_driver->type = TTY_DRIVER_TYPE_SYSTEM; + + /* + * We role our own so that we DONT ECHO. We can't echo because the + * device we are connecting to already echoes by default and this would + * throw us into a horrible recursive echo-echo-echo loop. + */ + hvcs_tty_driver->init_termios = hvcs_tty_termios; + hvcs_tty_driver->flags = TTY_DRIVER_REAL_RAW; + + tty_set_operations(hvcs_tty_driver, &hvcs_ops); + + /* + * The following call will result in sysfs entries that denote the + * dynamically assigned major and minor numbers for our devices. + */ + if (tty_register_driver(hvcs_tty_driver)) { + printk(KERN_ERR "HVCS: registration as a tty driver failed.\n"); + rc = -EIO; + goto register_fail; + } + + hvcs_pi_buff = (unsigned long *) __get_free_page(GFP_KERNEL); + if (!hvcs_pi_buff) { + rc = -ENOMEM; + goto buff_alloc_fail; + } + + hvcs_task = kthread_run(khvcsd, NULL, "khvcsd"); + if (IS_ERR(hvcs_task)) { + printk(KERN_ERR "HVCS: khvcsd creation failed.\n"); + rc = -EIO; + goto kthread_fail; + } + mutex_unlock(&hvcs_init_mutex); + return 0; + +kthread_fail: + free_page((unsigned long)hvcs_pi_buff); +buff_alloc_fail: + tty_unregister_driver(hvcs_tty_driver); +register_fail: + hvcs_free_index_list(); +index_fail: + put_tty_driver(hvcs_tty_driver); + hvcs_tty_driver = NULL; + mutex_unlock(&hvcs_init_mutex); + return rc; +} + +static int __init hvcs_module_init(void) +{ + int rc = vio_register_driver(&hvcs_vio_driver); + if (rc) { + printk(KERN_ERR "HVCS: can't register vio driver\n"); + return rc; + } + + pr_info("HVCS: Driver registered.\n"); + + /* This needs to be done AFTER the vio_register_driver() call or else + * the kobjects won't be initialized properly. + */ + rc = driver_create_file(&(hvcs_vio_driver.driver), &driver_attr_rescan); + if (rc) + pr_warn("HVCS: Failed to create rescan file (err %d)\n", rc); + + return 0; +} + +static void __exit hvcs_module_exit(void) +{ + /* + * This driver receives hvcs_remove callbacks for each device upon + * module removal. + */ + vio_unregister_driver(&hvcs_vio_driver); + if (!hvcs_task) + return; + + /* + * This synchronous operation will wake the khvcsd kthread if it is + * asleep and will return when khvcsd has terminated. + */ + kthread_stop(hvcs_task); + + spin_lock(&hvcs_pi_lock); + free_page((unsigned long)hvcs_pi_buff); + hvcs_pi_buff = NULL; + spin_unlock(&hvcs_pi_lock); + + driver_remove_file(&hvcs_vio_driver.driver, &driver_attr_rescan); + + tty_unregister_driver(hvcs_tty_driver); + + hvcs_free_index_list(); + + put_tty_driver(hvcs_tty_driver); + + printk(KERN_INFO "HVCS: driver module removed.\n"); +} + +module_init(hvcs_module_init); +module_exit(hvcs_module_exit); diff --git a/drivers/tty/hvc/hvsi.c b/drivers/tty/hvc/hvsi.c new file mode 100644 index 000000000..d6afaae17 --- /dev/null +++ b/drivers/tty/hvc/hvsi.c @@ -0,0 +1,1223 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2004 Hollis Blanchard , IBM + */ + +/* Host Virtual Serial Interface (HVSI) is a protocol between the hosted OS + * and the service processor on IBM pSeries servers. On these servers, there + * are no serial ports under the OS's control, and sometimes there is no other + * console available either. However, the service processor has two standard + * serial ports, so this over-complicated protocol allows the OS to control + * those ports by proxy. + * + * Besides data, the procotol supports the reading/writing of the serial + * port's DTR line, and the reading of the CD line. This is to allow the OS to + * control a modem attached to the service processor's serial port. Note that + * the OS cannot change the speed of the port through this protocol. + */ + +#undef DEBUG + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define HVSI_MAJOR 229 +#define HVSI_MINOR 128 +#define MAX_NR_HVSI_CONSOLES 4 + +#define HVSI_TIMEOUT (5*HZ) +#define HVSI_VERSION 1 +#define HVSI_MAX_PACKET 256 +#define HVSI_MAX_READ 16 +#define HVSI_MAX_OUTGOING_DATA 12 +#define N_OUTBUF 12 + +/* + * we pass data via two 8-byte registers, so we would like our char arrays + * properly aligned for those loads. + */ +#define __ALIGNED__ __attribute__((__aligned__(sizeof(long)))) + +struct hvsi_struct { + struct tty_port port; + struct delayed_work writer; + struct work_struct handshaker; + wait_queue_head_t emptyq; /* woken when outbuf is emptied */ + wait_queue_head_t stateq; /* woken when HVSI state changes */ + spinlock_t lock; + int index; + uint8_t throttle_buf[128]; + uint8_t outbuf[N_OUTBUF]; /* to implement write_room and chars_in_buffer */ + /* inbuf is for packet reassembly. leave a little room for leftovers. */ + uint8_t inbuf[HVSI_MAX_PACKET + HVSI_MAX_READ]; + uint8_t *inbuf_end; + int n_throttle; + int n_outbuf; + uint32_t vtermno; + uint32_t virq; + atomic_t seqno; /* HVSI packet sequence number */ + uint16_t mctrl; + uint8_t state; /* HVSI protocol state */ + uint8_t flags; +#ifdef CONFIG_MAGIC_SYSRQ + uint8_t sysrq; +#endif /* CONFIG_MAGIC_SYSRQ */ +}; +static struct hvsi_struct hvsi_ports[MAX_NR_HVSI_CONSOLES]; + +static struct tty_driver *hvsi_driver; +static int hvsi_count; +static int (*hvsi_wait)(struct hvsi_struct *hp, int state); + +enum HVSI_PROTOCOL_STATE { + HVSI_CLOSED, + HVSI_WAIT_FOR_VER_RESPONSE, + HVSI_WAIT_FOR_VER_QUERY, + HVSI_OPEN, + HVSI_WAIT_FOR_MCTRL_RESPONSE, + HVSI_FSP_DIED, +}; +#define HVSI_CONSOLE 0x1 + +static inline int is_console(struct hvsi_struct *hp) +{ + return hp->flags & HVSI_CONSOLE; +} + +static inline int is_open(struct hvsi_struct *hp) +{ + /* if we're waiting for an mctrl then we're already open */ + return (hp->state == HVSI_OPEN) + || (hp->state == HVSI_WAIT_FOR_MCTRL_RESPONSE); +} + +static inline void print_state(struct hvsi_struct *hp) +{ +#ifdef DEBUG + static const char *state_names[] = { + "HVSI_CLOSED", + "HVSI_WAIT_FOR_VER_RESPONSE", + "HVSI_WAIT_FOR_VER_QUERY", + "HVSI_OPEN", + "HVSI_WAIT_FOR_MCTRL_RESPONSE", + "HVSI_FSP_DIED", + }; + const char *name = (hp->state < ARRAY_SIZE(state_names)) + ? state_names[hp->state] : "UNKNOWN"; + + pr_debug("hvsi%i: state = %s\n", hp->index, name); +#endif /* DEBUG */ +} + +static inline void __set_state(struct hvsi_struct *hp, int state) +{ + hp->state = state; + print_state(hp); + wake_up_all(&hp->stateq); +} + +static inline void set_state(struct hvsi_struct *hp, int state) +{ + unsigned long flags; + + spin_lock_irqsave(&hp->lock, flags); + __set_state(hp, state); + spin_unlock_irqrestore(&hp->lock, flags); +} + +static inline int len_packet(const uint8_t *packet) +{ + return (int)((struct hvsi_header *)packet)->len; +} + +static inline int is_header(const uint8_t *packet) +{ + struct hvsi_header *header = (struct hvsi_header *)packet; + return header->type >= VS_QUERY_RESPONSE_PACKET_HEADER; +} + +static inline int got_packet(const struct hvsi_struct *hp, uint8_t *packet) +{ + if (hp->inbuf_end < packet + sizeof(struct hvsi_header)) + return 0; /* don't even have the packet header */ + + if (hp->inbuf_end < (packet + len_packet(packet))) + return 0; /* don't have the rest of the packet */ + + return 1; +} + +/* shift remaining bytes in packetbuf down */ +static void compact_inbuf(struct hvsi_struct *hp, uint8_t *read_to) +{ + int remaining = (int)(hp->inbuf_end - read_to); + + pr_debug("%s: %i chars remain\n", __func__, remaining); + + if (read_to != hp->inbuf) + memmove(hp->inbuf, read_to, remaining); + + hp->inbuf_end = hp->inbuf + remaining; +} + +#ifdef DEBUG +#define dbg_dump_packet(packet) dump_packet(packet) +#define dbg_dump_hex(data, len) dump_hex(data, len) +#else +#define dbg_dump_packet(packet) do { } while (0) +#define dbg_dump_hex(data, len) do { } while (0) +#endif + +static void dump_hex(const uint8_t *data, int len) +{ + int i; + + printk(" "); + for (i=0; i < len; i++) + printk("%.2x", data[i]); + + printk("\n "); + for (i=0; i < len; i++) { + if (isprint(data[i])) + printk("%c", data[i]); + else + printk("."); + } + printk("\n"); +} + +static void dump_packet(uint8_t *packet) +{ + struct hvsi_header *header = (struct hvsi_header *)packet; + + printk("type 0x%x, len %i, seqno %i:\n", header->type, header->len, + header->seqno); + + dump_hex(packet, header->len); +} + +static int hvsi_read(struct hvsi_struct *hp, char *buf, int count) +{ + unsigned long got; + + got = hvc_get_chars(hp->vtermno, buf, count); + + return got; +} + +static void hvsi_recv_control(struct hvsi_struct *hp, uint8_t *packet, + struct tty_struct *tty, struct hvsi_struct **to_handshake) +{ + struct hvsi_control *header = (struct hvsi_control *)packet; + + switch (be16_to_cpu(header->verb)) { + case VSV_MODEM_CTL_UPDATE: + if ((be32_to_cpu(header->word) & HVSI_TSCD) == 0) { + /* CD went away; no more connection */ + pr_debug("hvsi%i: CD dropped\n", hp->index); + hp->mctrl &= TIOCM_CD; + if (tty && !C_CLOCAL(tty)) + tty_hangup(tty); + } + break; + case VSV_CLOSE_PROTOCOL: + pr_debug("hvsi%i: service processor came back\n", hp->index); + if (hp->state != HVSI_CLOSED) { + *to_handshake = hp; + } + break; + default: + printk(KERN_WARNING "hvsi%i: unknown HVSI control packet: ", + hp->index); + dump_packet(packet); + break; + } +} + +static void hvsi_recv_response(struct hvsi_struct *hp, uint8_t *packet) +{ + struct hvsi_query_response *resp = (struct hvsi_query_response *)packet; + uint32_t mctrl_word; + + switch (hp->state) { + case HVSI_WAIT_FOR_VER_RESPONSE: + __set_state(hp, HVSI_WAIT_FOR_VER_QUERY); + break; + case HVSI_WAIT_FOR_MCTRL_RESPONSE: + hp->mctrl = 0; + mctrl_word = be32_to_cpu(resp->u.mctrl_word); + if (mctrl_word & HVSI_TSDTR) + hp->mctrl |= TIOCM_DTR; + if (mctrl_word & HVSI_TSCD) + hp->mctrl |= TIOCM_CD; + __set_state(hp, HVSI_OPEN); + break; + default: + printk(KERN_ERR "hvsi%i: unexpected query response: ", hp->index); + dump_packet(packet); + break; + } +} + +/* respond to service processor's version query */ +static int hvsi_version_respond(struct hvsi_struct *hp, uint16_t query_seqno) +{ + struct hvsi_query_response packet __ALIGNED__; + int wrote; + + packet.hdr.type = VS_QUERY_RESPONSE_PACKET_HEADER; + packet.hdr.len = sizeof(struct hvsi_query_response); + packet.hdr.seqno = cpu_to_be16(atomic_inc_return(&hp->seqno)); + packet.verb = cpu_to_be16(VSV_SEND_VERSION_NUMBER); + packet.u.version = HVSI_VERSION; + packet.query_seqno = cpu_to_be16(query_seqno+1); + + pr_debug("%s: sending %i bytes\n", __func__, packet.hdr.len); + dbg_dump_hex((uint8_t*)&packet, packet.hdr.len); + + wrote = hvc_put_chars(hp->vtermno, (char *)&packet, packet.hdr.len); + if (wrote != packet.hdr.len) { + printk(KERN_ERR "hvsi%i: couldn't send query response!\n", + hp->index); + return -EIO; + } + + return 0; +} + +static void hvsi_recv_query(struct hvsi_struct *hp, uint8_t *packet) +{ + struct hvsi_query *query = (struct hvsi_query *)packet; + + switch (hp->state) { + case HVSI_WAIT_FOR_VER_QUERY: + hvsi_version_respond(hp, be16_to_cpu(query->hdr.seqno)); + __set_state(hp, HVSI_OPEN); + break; + default: + printk(KERN_ERR "hvsi%i: unexpected query: ", hp->index); + dump_packet(packet); + break; + } +} + +static void hvsi_insert_chars(struct hvsi_struct *hp, const char *buf, int len) +{ + int i; + + for (i=0; i < len; i++) { + char c = buf[i]; +#ifdef CONFIG_MAGIC_SYSRQ + if (c == '\0') { + hp->sysrq = 1; + continue; + } else if (hp->sysrq) { + handle_sysrq(c); + hp->sysrq = 0; + continue; + } +#endif /* CONFIG_MAGIC_SYSRQ */ + tty_insert_flip_char(&hp->port, c, 0); + } +} + +/* + * We could get 252 bytes of data at once here. But the tty layer only + * throttles us at TTY_THRESHOLD_THROTTLE (128) bytes, so we could overflow + * it. Accordingly we won't send more than 128 bytes at a time to the flip + * buffer, which will give the tty buffer a chance to throttle us. Should the + * value of TTY_THRESHOLD_THROTTLE change in n_tty.c, this code should be + * revisited. + */ +#define TTY_THRESHOLD_THROTTLE 128 +static bool hvsi_recv_data(struct hvsi_struct *hp, const uint8_t *packet) +{ + const struct hvsi_header *header = (const struct hvsi_header *)packet; + const uint8_t *data = packet + sizeof(struct hvsi_header); + int datalen = header->len - sizeof(struct hvsi_header); + int overflow = datalen - TTY_THRESHOLD_THROTTLE; + + pr_debug("queueing %i chars '%.*s'\n", datalen, datalen, data); + + if (datalen == 0) + return false; + + if (overflow > 0) { + pr_debug("%s: got >TTY_THRESHOLD_THROTTLE bytes\n", __func__); + datalen = TTY_THRESHOLD_THROTTLE; + } + + hvsi_insert_chars(hp, data, datalen); + + if (overflow > 0) { + /* + * we still have more data to deliver, so we need to save off the + * overflow and send it later + */ + pr_debug("%s: deferring overflow\n", __func__); + memcpy(hp->throttle_buf, data + TTY_THRESHOLD_THROTTLE, overflow); + hp->n_throttle = overflow; + } + + return true; +} + +/* + * Returns true/false indicating data successfully read from hypervisor. + * Used both to get packets for tty connections and to advance the state + * machine during console handshaking (in which case tty = NULL and we ignore + * incoming data). + */ +static int hvsi_load_chunk(struct hvsi_struct *hp, struct tty_struct *tty, + struct hvsi_struct **handshake) +{ + uint8_t *packet = hp->inbuf; + int chunklen; + bool flip = false; + + *handshake = NULL; + + chunklen = hvsi_read(hp, hp->inbuf_end, HVSI_MAX_READ); + if (chunklen == 0) { + pr_debug("%s: 0-length read\n", __func__); + return 0; + } + + pr_debug("%s: got %i bytes\n", __func__, chunklen); + dbg_dump_hex(hp->inbuf_end, chunklen); + + hp->inbuf_end += chunklen; + + /* handle all completed packets */ + while ((packet < hp->inbuf_end) && got_packet(hp, packet)) { + struct hvsi_header *header = (struct hvsi_header *)packet; + + if (!is_header(packet)) { + printk(KERN_ERR "hvsi%i: got malformed packet\n", hp->index); + /* skip bytes until we find a header or run out of data */ + while ((packet < hp->inbuf_end) && (!is_header(packet))) + packet++; + continue; + } + + pr_debug("%s: handling %i-byte packet\n", __func__, + len_packet(packet)); + dbg_dump_packet(packet); + + switch (header->type) { + case VS_DATA_PACKET_HEADER: + if (!is_open(hp)) + break; + flip = hvsi_recv_data(hp, packet); + break; + case VS_CONTROL_PACKET_HEADER: + hvsi_recv_control(hp, packet, tty, handshake); + break; + case VS_QUERY_RESPONSE_PACKET_HEADER: + hvsi_recv_response(hp, packet); + break; + case VS_QUERY_PACKET_HEADER: + hvsi_recv_query(hp, packet); + break; + default: + printk(KERN_ERR "hvsi%i: unknown HVSI packet type 0x%x\n", + hp->index, header->type); + dump_packet(packet); + break; + } + + packet += len_packet(packet); + + if (*handshake) { + pr_debug("%s: handshake\n", __func__); + break; + } + } + + compact_inbuf(hp, packet); + + if (flip) + tty_flip_buffer_push(&hp->port); + + return 1; +} + +static void hvsi_send_overflow(struct hvsi_struct *hp) +{ + pr_debug("%s: delivering %i bytes overflow\n", __func__, + hp->n_throttle); + + hvsi_insert_chars(hp, hp->throttle_buf, hp->n_throttle); + hp->n_throttle = 0; +} + +/* + * must get all pending data because we only get an irq on empty->non-empty + * transition + */ +static irqreturn_t hvsi_interrupt(int irq, void *arg) +{ + struct hvsi_struct *hp = (struct hvsi_struct *)arg; + struct hvsi_struct *handshake; + struct tty_struct *tty; + unsigned long flags; + int again = 1; + + pr_debug("%s\n", __func__); + + tty = tty_port_tty_get(&hp->port); + + while (again) { + spin_lock_irqsave(&hp->lock, flags); + again = hvsi_load_chunk(hp, tty, &handshake); + spin_unlock_irqrestore(&hp->lock, flags); + + if (handshake) { + pr_debug("hvsi%i: attempting re-handshake\n", handshake->index); + schedule_work(&handshake->handshaker); + } + } + + spin_lock_irqsave(&hp->lock, flags); + if (tty && hp->n_throttle && !tty_throttled(tty)) { + /* we weren't hung up and we weren't throttled, so we can + * deliver the rest now */ + hvsi_send_overflow(hp); + tty_flip_buffer_push(&hp->port); + } + spin_unlock_irqrestore(&hp->lock, flags); + + tty_kref_put(tty); + + return IRQ_HANDLED; +} + +/* for boot console, before the irq handler is running */ +static int __init poll_for_state(struct hvsi_struct *hp, int state) +{ + unsigned long end_jiffies = jiffies + HVSI_TIMEOUT; + + for (;;) { + hvsi_interrupt(hp->virq, (void *)hp); /* get pending data */ + + if (hp->state == state) + return 0; + + mdelay(5); + if (time_after(jiffies, end_jiffies)) + return -EIO; + } +} + +/* wait for irq handler to change our state */ +static int wait_for_state(struct hvsi_struct *hp, int state) +{ + int ret = 0; + + if (!wait_event_timeout(hp->stateq, (hp->state == state), HVSI_TIMEOUT)) + ret = -EIO; + + return ret; +} + +static int hvsi_query(struct hvsi_struct *hp, uint16_t verb) +{ + struct hvsi_query packet __ALIGNED__; + int wrote; + + packet.hdr.type = VS_QUERY_PACKET_HEADER; + packet.hdr.len = sizeof(struct hvsi_query); + packet.hdr.seqno = cpu_to_be16(atomic_inc_return(&hp->seqno)); + packet.verb = cpu_to_be16(verb); + + pr_debug("%s: sending %i bytes\n", __func__, packet.hdr.len); + dbg_dump_hex((uint8_t*)&packet, packet.hdr.len); + + wrote = hvc_put_chars(hp->vtermno, (char *)&packet, packet.hdr.len); + if (wrote != packet.hdr.len) { + printk(KERN_ERR "hvsi%i: couldn't send query (%i)!\n", hp->index, + wrote); + return -EIO; + } + + return 0; +} + +static int hvsi_get_mctrl(struct hvsi_struct *hp) +{ + int ret; + + set_state(hp, HVSI_WAIT_FOR_MCTRL_RESPONSE); + hvsi_query(hp, VSV_SEND_MODEM_CTL_STATUS); + + ret = hvsi_wait(hp, HVSI_OPEN); + if (ret < 0) { + printk(KERN_ERR "hvsi%i: didn't get modem flags\n", hp->index); + set_state(hp, HVSI_OPEN); + return ret; + } + + pr_debug("%s: mctrl 0x%x\n", __func__, hp->mctrl); + + return 0; +} + +/* note that we can only set DTR */ +static int hvsi_set_mctrl(struct hvsi_struct *hp, uint16_t mctrl) +{ + struct hvsi_control packet __ALIGNED__; + int wrote; + + packet.hdr.type = VS_CONTROL_PACKET_HEADER; + packet.hdr.seqno = cpu_to_be16(atomic_inc_return(&hp->seqno)); + packet.hdr.len = sizeof(struct hvsi_control); + packet.verb = cpu_to_be16(VSV_SET_MODEM_CTL); + packet.mask = cpu_to_be32(HVSI_TSDTR); + + if (mctrl & TIOCM_DTR) + packet.word = cpu_to_be32(HVSI_TSDTR); + + pr_debug("%s: sending %i bytes\n", __func__, packet.hdr.len); + dbg_dump_hex((uint8_t*)&packet, packet.hdr.len); + + wrote = hvc_put_chars(hp->vtermno, (char *)&packet, packet.hdr.len); + if (wrote != packet.hdr.len) { + printk(KERN_ERR "hvsi%i: couldn't set DTR!\n", hp->index); + return -EIO; + } + + return 0; +} + +static void hvsi_drain_input(struct hvsi_struct *hp) +{ + uint8_t buf[HVSI_MAX_READ] __ALIGNED__; + unsigned long end_jiffies = jiffies + HVSI_TIMEOUT; + + while (time_before(end_jiffies, jiffies)) + if (0 == hvsi_read(hp, buf, HVSI_MAX_READ)) + break; +} + +static int hvsi_handshake(struct hvsi_struct *hp) +{ + int ret; + + /* + * We could have a CLOSE or other data waiting for us before we even try + * to open; try to throw it all away so we don't get confused. (CLOSE + * is the first message sent up the pipe when the FSP comes online. We + * need to distinguish between "it came up a while ago and we're the first + * user" and "it was just reset before it saw our handshake packet".) + */ + hvsi_drain_input(hp); + + set_state(hp, HVSI_WAIT_FOR_VER_RESPONSE); + ret = hvsi_query(hp, VSV_SEND_VERSION_NUMBER); + if (ret < 0) { + printk(KERN_ERR "hvsi%i: couldn't send version query\n", hp->index); + return ret; + } + + ret = hvsi_wait(hp, HVSI_OPEN); + if (ret < 0) + return ret; + + return 0; +} + +static void hvsi_handshaker(struct work_struct *work) +{ + struct hvsi_struct *hp = + container_of(work, struct hvsi_struct, handshaker); + + if (hvsi_handshake(hp) >= 0) + return; + + printk(KERN_ERR "hvsi%i: re-handshaking failed\n", hp->index); + if (is_console(hp)) { + /* + * ttys will re-attempt the handshake via hvsi_open, but + * the console will not. + */ + printk(KERN_ERR "hvsi%i: lost console!\n", hp->index); + } +} + +static int hvsi_put_chars(struct hvsi_struct *hp, const char *buf, int count) +{ + struct hvsi_data packet __ALIGNED__; + int ret; + + BUG_ON(count > HVSI_MAX_OUTGOING_DATA); + + packet.hdr.type = VS_DATA_PACKET_HEADER; + packet.hdr.seqno = cpu_to_be16(atomic_inc_return(&hp->seqno)); + packet.hdr.len = count + sizeof(struct hvsi_header); + memcpy(&packet.data, buf, count); + + ret = hvc_put_chars(hp->vtermno, (char *)&packet, packet.hdr.len); + if (ret == packet.hdr.len) { + /* return the number of chars written, not the packet length */ + return count; + } + return ret; /* return any errors */ +} + +static void hvsi_close_protocol(struct hvsi_struct *hp) +{ + struct hvsi_control packet __ALIGNED__; + + packet.hdr.type = VS_CONTROL_PACKET_HEADER; + packet.hdr.seqno = cpu_to_be16(atomic_inc_return(&hp->seqno)); + packet.hdr.len = 6; + packet.verb = cpu_to_be16(VSV_CLOSE_PROTOCOL); + + pr_debug("%s: sending %i bytes\n", __func__, packet.hdr.len); + dbg_dump_hex((uint8_t*)&packet, packet.hdr.len); + + hvc_put_chars(hp->vtermno, (char *)&packet, packet.hdr.len); +} + +static int hvsi_open(struct tty_struct *tty, struct file *filp) +{ + struct hvsi_struct *hp; + unsigned long flags; + int ret; + + pr_debug("%s\n", __func__); + + hp = &hvsi_ports[tty->index]; + + tty->driver_data = hp; + + mb(); + if (hp->state == HVSI_FSP_DIED) + return -EIO; + + tty_port_tty_set(&hp->port, tty); + spin_lock_irqsave(&hp->lock, flags); + hp->port.count++; + atomic_set(&hp->seqno, 0); + h_vio_signal(hp->vtermno, VIO_IRQ_ENABLE); + spin_unlock_irqrestore(&hp->lock, flags); + + if (is_console(hp)) + return 0; /* this has already been handshaked as the console */ + + ret = hvsi_handshake(hp); + if (ret < 0) { + printk(KERN_ERR "%s: HVSI handshaking failed\n", tty->name); + return ret; + } + + ret = hvsi_get_mctrl(hp); + if (ret < 0) { + printk(KERN_ERR "%s: couldn't get initial modem flags\n", tty->name); + return ret; + } + + ret = hvsi_set_mctrl(hp, hp->mctrl | TIOCM_DTR); + if (ret < 0) { + printk(KERN_ERR "%s: couldn't set DTR\n", tty->name); + return ret; + } + + return 0; +} + +/* wait for hvsi_write_worker to empty hp->outbuf */ +static void hvsi_flush_output(struct hvsi_struct *hp) +{ + wait_event_timeout(hp->emptyq, (hp->n_outbuf <= 0), HVSI_TIMEOUT); + + /* 'writer' could still be pending if it didn't see n_outbuf = 0 yet */ + cancel_delayed_work_sync(&hp->writer); + flush_work(&hp->handshaker); + + /* + * it's also possible that our timeout expired and hvsi_write_worker + * didn't manage to push outbuf. poof. + */ + hp->n_outbuf = 0; +} + +static void hvsi_close(struct tty_struct *tty, struct file *filp) +{ + struct hvsi_struct *hp = tty->driver_data; + unsigned long flags; + + pr_debug("%s\n", __func__); + + if (tty_hung_up_p(filp)) + return; + + spin_lock_irqsave(&hp->lock, flags); + + if (--hp->port.count == 0) { + tty_port_tty_set(&hp->port, NULL); + hp->inbuf_end = hp->inbuf; /* discard remaining partial packets */ + + /* only close down connection if it is not the console */ + if (!is_console(hp)) { + h_vio_signal(hp->vtermno, VIO_IRQ_DISABLE); /* no more irqs */ + __set_state(hp, HVSI_CLOSED); + /* + * any data delivered to the tty layer after this will be + * discarded (except for XON/XOFF) + */ + tty->closing = 1; + + spin_unlock_irqrestore(&hp->lock, flags); + + /* let any existing irq handlers finish. no more will start. */ + synchronize_irq(hp->virq); + + /* hvsi_write_worker will re-schedule until outbuf is empty. */ + hvsi_flush_output(hp); + + /* tell FSP to stop sending data */ + hvsi_close_protocol(hp); + + /* + * drain anything FSP is still in the middle of sending, and let + * hvsi_handshake drain the rest on the next open. + */ + hvsi_drain_input(hp); + + spin_lock_irqsave(&hp->lock, flags); + } + } else if (hp->port.count < 0) + printk(KERN_ERR "hvsi_close %lu: oops, count is %d\n", + hp - hvsi_ports, hp->port.count); + + spin_unlock_irqrestore(&hp->lock, flags); +} + +static void hvsi_hangup(struct tty_struct *tty) +{ + struct hvsi_struct *hp = tty->driver_data; + unsigned long flags; + + pr_debug("%s\n", __func__); + + tty_port_tty_set(&hp->port, NULL); + + spin_lock_irqsave(&hp->lock, flags); + hp->port.count = 0; + hp->n_outbuf = 0; + spin_unlock_irqrestore(&hp->lock, flags); +} + +/* called with hp->lock held */ +static void hvsi_push(struct hvsi_struct *hp) +{ + int n; + + if (hp->n_outbuf <= 0) + return; + + n = hvsi_put_chars(hp, hp->outbuf, hp->n_outbuf); + if (n > 0) { + /* success */ + pr_debug("%s: wrote %i chars\n", __func__, n); + hp->n_outbuf = 0; + } else if (n == -EIO) { + __set_state(hp, HVSI_FSP_DIED); + printk(KERN_ERR "hvsi%i: service processor died\n", hp->index); + } +} + +/* hvsi_write_worker will keep rescheduling itself until outbuf is empty */ +static void hvsi_write_worker(struct work_struct *work) +{ + struct hvsi_struct *hp = + container_of(work, struct hvsi_struct, writer.work); + unsigned long flags; +#ifdef DEBUG + static long start_j = 0; + + if (start_j == 0) + start_j = jiffies; +#endif /* DEBUG */ + + spin_lock_irqsave(&hp->lock, flags); + + pr_debug("%s: %i chars in buffer\n", __func__, hp->n_outbuf); + + if (!is_open(hp)) { + /* + * We could have a non-open connection if the service processor died + * while we were busily scheduling ourselves. In that case, it could + * be minutes before the service processor comes back, so only try + * again once a second. + */ + schedule_delayed_work(&hp->writer, HZ); + goto out; + } + + hvsi_push(hp); + if (hp->n_outbuf > 0) + schedule_delayed_work(&hp->writer, 10); + else { +#ifdef DEBUG + pr_debug("%s: outbuf emptied after %li jiffies\n", __func__, + jiffies - start_j); + start_j = 0; +#endif /* DEBUG */ + wake_up_all(&hp->emptyq); + tty_port_tty_wakeup(&hp->port); + } + +out: + spin_unlock_irqrestore(&hp->lock, flags); +} + +static int hvsi_write_room(struct tty_struct *tty) +{ + struct hvsi_struct *hp = tty->driver_data; + + return N_OUTBUF - hp->n_outbuf; +} + +static int hvsi_chars_in_buffer(struct tty_struct *tty) +{ + struct hvsi_struct *hp = tty->driver_data; + + return hp->n_outbuf; +} + +static int hvsi_write(struct tty_struct *tty, + const unsigned char *buf, int count) +{ + struct hvsi_struct *hp = tty->driver_data; + const char *source = buf; + unsigned long flags; + int total = 0; + int origcount = count; + + spin_lock_irqsave(&hp->lock, flags); + + pr_debug("%s: %i chars in buffer\n", __func__, hp->n_outbuf); + + if (!is_open(hp)) { + /* we're either closing or not yet open; don't accept data */ + pr_debug("%s: not open\n", __func__); + goto out; + } + + /* + * when the hypervisor buffer (16K) fills, data will stay in hp->outbuf + * and hvsi_write_worker will be scheduled. subsequent hvsi_write() calls + * will see there is no room in outbuf and return. + */ + while ((count > 0) && (hvsi_write_room(tty) > 0)) { + int chunksize = min(count, hvsi_write_room(tty)); + + BUG_ON(hp->n_outbuf < 0); + memcpy(hp->outbuf + hp->n_outbuf, source, chunksize); + hp->n_outbuf += chunksize; + + total += chunksize; + source += chunksize; + count -= chunksize; + hvsi_push(hp); + } + + if (hp->n_outbuf > 0) { + /* + * we weren't able to write it all to the hypervisor. + * schedule another push attempt. + */ + schedule_delayed_work(&hp->writer, 10); + } + +out: + spin_unlock_irqrestore(&hp->lock, flags); + + if (total != origcount) + pr_debug("%s: wanted %i, only wrote %i\n", __func__, origcount, + total); + + return total; +} + +/* + * I have never seen throttle or unthrottle called, so this little throttle + * buffering scheme may or may not work. + */ +static void hvsi_throttle(struct tty_struct *tty) +{ + struct hvsi_struct *hp = tty->driver_data; + + pr_debug("%s\n", __func__); + + h_vio_signal(hp->vtermno, VIO_IRQ_DISABLE); +} + +static void hvsi_unthrottle(struct tty_struct *tty) +{ + struct hvsi_struct *hp = tty->driver_data; + unsigned long flags; + + pr_debug("%s\n", __func__); + + spin_lock_irqsave(&hp->lock, flags); + if (hp->n_throttle) { + hvsi_send_overflow(hp); + tty_flip_buffer_push(&hp->port); + } + spin_unlock_irqrestore(&hp->lock, flags); + + + h_vio_signal(hp->vtermno, VIO_IRQ_ENABLE); +} + +static int hvsi_tiocmget(struct tty_struct *tty) +{ + struct hvsi_struct *hp = tty->driver_data; + + hvsi_get_mctrl(hp); + return hp->mctrl; +} + +static int hvsi_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct hvsi_struct *hp = tty->driver_data; + unsigned long flags; + uint16_t new_mctrl; + + /* we can only alter DTR */ + clear &= TIOCM_DTR; + set &= TIOCM_DTR; + + spin_lock_irqsave(&hp->lock, flags); + + new_mctrl = (hp->mctrl & ~clear) | set; + + if (hp->mctrl != new_mctrl) { + hvsi_set_mctrl(hp, new_mctrl); + hp->mctrl = new_mctrl; + } + spin_unlock_irqrestore(&hp->lock, flags); + + return 0; +} + + +static const struct tty_operations hvsi_ops = { + .open = hvsi_open, + .close = hvsi_close, + .write = hvsi_write, + .hangup = hvsi_hangup, + .write_room = hvsi_write_room, + .chars_in_buffer = hvsi_chars_in_buffer, + .throttle = hvsi_throttle, + .unthrottle = hvsi_unthrottle, + .tiocmget = hvsi_tiocmget, + .tiocmset = hvsi_tiocmset, +}; + +static int __init hvsi_init(void) +{ + int i, ret; + + hvsi_driver = alloc_tty_driver(hvsi_count); + if (!hvsi_driver) + return -ENOMEM; + + hvsi_driver->driver_name = "hvsi"; + hvsi_driver->name = "hvsi"; + hvsi_driver->major = HVSI_MAJOR; + hvsi_driver->minor_start = HVSI_MINOR; + hvsi_driver->type = TTY_DRIVER_TYPE_SYSTEM; + hvsi_driver->init_termios = tty_std_termios; + hvsi_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL; + hvsi_driver->init_termios.c_ispeed = 9600; + hvsi_driver->init_termios.c_ospeed = 9600; + hvsi_driver->flags = TTY_DRIVER_REAL_RAW; + tty_set_operations(hvsi_driver, &hvsi_ops); + + for (i=0; i < hvsi_count; i++) { + struct hvsi_struct *hp = &hvsi_ports[i]; + int ret = 1; + + tty_port_link_device(&hp->port, hvsi_driver, i); + + ret = request_irq(hp->virq, hvsi_interrupt, 0, "hvsi", hp); + if (ret) + printk(KERN_ERR "HVSI: couldn't reserve irq 0x%x (error %i)\n", + hp->virq, ret); + } + hvsi_wait = wait_for_state; /* irqs active now */ + + ret = tty_register_driver(hvsi_driver); + if (ret) { + pr_err("Couldn't register hvsi console driver\n"); + goto err_free_irq; + } + + printk(KERN_DEBUG "HVSI: registered %i devices\n", hvsi_count); + + return 0; +err_free_irq: + hvsi_wait = poll_for_state; + for (i = 0; i < hvsi_count; i++) { + struct hvsi_struct *hp = &hvsi_ports[i]; + + free_irq(hp->virq, hp); + } + tty_driver_kref_put(hvsi_driver); + + return ret; +} +device_initcall(hvsi_init); + +/***** console (not tty) code: *****/ + +static void hvsi_console_print(struct console *console, const char *buf, + unsigned int count) +{ + struct hvsi_struct *hp = &hvsi_ports[console->index]; + char c[HVSI_MAX_OUTGOING_DATA] __ALIGNED__; + unsigned int i = 0, n = 0; + int ret, donecr = 0; + + mb(); + if (!is_open(hp)) + return; + + /* + * ugh, we have to translate LF -> CRLF ourselves, in place. + * copied from hvc_console.c: + */ + while (count > 0 || i > 0) { + if (count > 0 && i < sizeof(c)) { + if (buf[n] == '\n' && !donecr) { + c[i++] = '\r'; + donecr = 1; + } else { + c[i++] = buf[n++]; + donecr = 0; + --count; + } + } else { + ret = hvsi_put_chars(hp, c, i); + if (ret < 0) + i = 0; + i -= ret; + } + } +} + +static struct tty_driver *hvsi_console_device(struct console *console, + int *index) +{ + *index = console->index; + return hvsi_driver; +} + +static int __init hvsi_console_setup(struct console *console, char *options) +{ + struct hvsi_struct *hp; + int ret; + + if (console->index < 0 || console->index >= hvsi_count) + return -EINVAL; + hp = &hvsi_ports[console->index]; + + /* give the FSP a chance to change the baud rate when we re-open */ + hvsi_close_protocol(hp); + + ret = hvsi_handshake(hp); + if (ret < 0) + return ret; + + ret = hvsi_get_mctrl(hp); + if (ret < 0) + return ret; + + ret = hvsi_set_mctrl(hp, hp->mctrl | TIOCM_DTR); + if (ret < 0) + return ret; + + hp->flags |= HVSI_CONSOLE; + + return 0; +} + +static struct console hvsi_console = { + .name = "hvsi", + .write = hvsi_console_print, + .device = hvsi_console_device, + .setup = hvsi_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + +static int __init hvsi_console_init(void) +{ + struct device_node *vty; + + hvsi_wait = poll_for_state; /* no irqs yet; must poll */ + + /* search device tree for vty nodes */ + for_each_compatible_node(vty, "serial", "hvterm-protocol") { + struct hvsi_struct *hp; + const __be32 *vtermno, *irq; + + vtermno = of_get_property(vty, "reg", NULL); + irq = of_get_property(vty, "interrupts", NULL); + if (!vtermno || !irq) + continue; + + if (hvsi_count >= MAX_NR_HVSI_CONSOLES) { + of_node_put(vty); + break; + } + + hp = &hvsi_ports[hvsi_count]; + INIT_DELAYED_WORK(&hp->writer, hvsi_write_worker); + INIT_WORK(&hp->handshaker, hvsi_handshaker); + init_waitqueue_head(&hp->emptyq); + init_waitqueue_head(&hp->stateq); + spin_lock_init(&hp->lock); + tty_port_init(&hp->port); + hp->index = hvsi_count; + hp->inbuf_end = hp->inbuf; + hp->state = HVSI_CLOSED; + hp->vtermno = be32_to_cpup(vtermno); + hp->virq = irq_create_mapping(NULL, be32_to_cpup(irq)); + if (hp->virq == 0) { + printk(KERN_ERR "%s: couldn't create irq mapping for 0x%x\n", + __func__, be32_to_cpup(irq)); + tty_port_destroy(&hp->port); + continue; + } + + hvsi_count++; + } + + if (hvsi_count) + register_console(&hvsi_console); + return 0; +} +console_initcall(hvsi_console_init); diff --git a/drivers/tty/hvc/hvsi_lib.c b/drivers/tty/hvc/hvsi_lib.c new file mode 100644 index 000000000..09289c815 --- /dev/null +++ b/drivers/tty/hvc/hvsi_lib.c @@ -0,0 +1,424 @@ +// SPDX-License-Identifier: GPL-2.0 +#include +#include +#include +#include +#include + +#include "hvc_console.h" + +static int hvsi_send_packet(struct hvsi_priv *pv, struct hvsi_header *packet) +{ + packet->seqno = cpu_to_be16(atomic_inc_return(&pv->seqno)); + + /* Assumes that always succeeds, works in practice */ + return pv->put_chars(pv->termno, (char *)packet, packet->len); +} + +static void hvsi_start_handshake(struct hvsi_priv *pv) +{ + struct hvsi_query q; + + /* Reset state */ + pv->established = 0; + atomic_set(&pv->seqno, 0); + + pr_devel("HVSI@%x: Handshaking started\n", pv->termno); + + /* Send version query */ + q.hdr.type = VS_QUERY_PACKET_HEADER; + q.hdr.len = sizeof(struct hvsi_query); + q.verb = cpu_to_be16(VSV_SEND_VERSION_NUMBER); + hvsi_send_packet(pv, &q.hdr); +} + +static int hvsi_send_close(struct hvsi_priv *pv) +{ + struct hvsi_control ctrl; + + pv->established = 0; + + ctrl.hdr.type = VS_CONTROL_PACKET_HEADER; + ctrl.hdr.len = sizeof(struct hvsi_control); + ctrl.verb = cpu_to_be16(VSV_CLOSE_PROTOCOL); + return hvsi_send_packet(pv, &ctrl.hdr); +} + +static void hvsi_cd_change(struct hvsi_priv *pv, int cd) +{ + if (cd) + pv->mctrl |= TIOCM_CD; + else { + pv->mctrl &= ~TIOCM_CD; + + /* We copy the existing hvsi driver semantics + * here which are to trigger a hangup when + * we get a carrier loss. + * Closing our connection to the server will + * do just that. + */ + if (!pv->is_console && pv->opened) { + pr_devel("HVSI@%x Carrier lost, hanging up !\n", + pv->termno); + hvsi_send_close(pv); + } + } +} + +static void hvsi_got_control(struct hvsi_priv *pv) +{ + struct hvsi_control *pkt = (struct hvsi_control *)pv->inbuf; + + switch (be16_to_cpu(pkt->verb)) { + case VSV_CLOSE_PROTOCOL: + /* We restart the handshaking */ + hvsi_start_handshake(pv); + break; + case VSV_MODEM_CTL_UPDATE: + /* Transition of carrier detect */ + hvsi_cd_change(pv, be32_to_cpu(pkt->word) & HVSI_TSCD); + break; + } +} + +static void hvsi_got_query(struct hvsi_priv *pv) +{ + struct hvsi_query *pkt = (struct hvsi_query *)pv->inbuf; + struct hvsi_query_response r; + + /* We only handle version queries */ + if (be16_to_cpu(pkt->verb) != VSV_SEND_VERSION_NUMBER) + return; + + pr_devel("HVSI@%x: Got version query, sending response...\n", + pv->termno); + + /* Send version response */ + r.hdr.type = VS_QUERY_RESPONSE_PACKET_HEADER; + r.hdr.len = sizeof(struct hvsi_query_response); + r.verb = cpu_to_be16(VSV_SEND_VERSION_NUMBER); + r.u.version = HVSI_VERSION; + r.query_seqno = pkt->hdr.seqno; + hvsi_send_packet(pv, &r.hdr); + + /* Assume protocol is open now */ + pv->established = 1; +} + +static void hvsi_got_response(struct hvsi_priv *pv) +{ + struct hvsi_query_response *r = + (struct hvsi_query_response *)pv->inbuf; + + switch(r->verb) { + case VSV_SEND_MODEM_CTL_STATUS: + hvsi_cd_change(pv, be32_to_cpu(r->u.mctrl_word) & HVSI_TSCD); + pv->mctrl_update = 1; + break; + } +} + +static int hvsi_check_packet(struct hvsi_priv *pv) +{ + u8 len, type; + + /* Check header validity. If it's invalid, we ditch + * the whole buffer and hope we eventually resync + */ + if (pv->inbuf[0] < 0xfc) { + pv->inbuf_len = pv->inbuf_pktlen = 0; + return 0; + } + type = pv->inbuf[0]; + len = pv->inbuf[1]; + + /* Packet incomplete ? */ + if (pv->inbuf_len < len) + return 0; + + pr_devel("HVSI@%x: Got packet type %x len %d bytes:\n", + pv->termno, type, len); + + /* We have a packet, yay ! Handle it */ + switch(type) { + case VS_DATA_PACKET_HEADER: + pv->inbuf_pktlen = len - 4; + pv->inbuf_cur = 4; + return 1; + case VS_CONTROL_PACKET_HEADER: + hvsi_got_control(pv); + break; + case VS_QUERY_PACKET_HEADER: + hvsi_got_query(pv); + break; + case VS_QUERY_RESPONSE_PACKET_HEADER: + hvsi_got_response(pv); + break; + } + + /* Swallow packet and retry */ + pv->inbuf_len -= len; + memmove(pv->inbuf, &pv->inbuf[len], pv->inbuf_len); + return 1; +} + +static int hvsi_get_packet(struct hvsi_priv *pv) +{ + /* If we have room in the buffer, ask HV for more */ + if (pv->inbuf_len < HVSI_INBUF_SIZE) + pv->inbuf_len += pv->get_chars(pv->termno, + &pv->inbuf[pv->inbuf_len], + HVSI_INBUF_SIZE - pv->inbuf_len); + /* + * If we have at least 4 bytes in the buffer, check for + * a full packet and retry + */ + if (pv->inbuf_len >= 4) + return hvsi_check_packet(pv); + return 0; +} + +int hvsilib_get_chars(struct hvsi_priv *pv, char *buf, int count) +{ + unsigned int tries, read = 0; + + if (WARN_ON(!pv)) + return -ENXIO; + + /* If we aren't open, don't do anything in order to avoid races + * with connection establishment. The hvc core will call this + * before we have returned from notifier_add(), and we need to + * avoid multiple users playing with the receive buffer + */ + if (!pv->opened) + return 0; + + /* We try twice, once with what data we have and once more + * after we try to fetch some more from the hypervisor + */ + for (tries = 1; count && tries < 2; tries++) { + /* Consume existing data packet */ + if (pv->inbuf_pktlen) { + unsigned int l = min(count, (int)pv->inbuf_pktlen); + memcpy(&buf[read], &pv->inbuf[pv->inbuf_cur], l); + pv->inbuf_cur += l; + pv->inbuf_pktlen -= l; + count -= l; + read += l; + } + if (count == 0) + break; + + /* Data packet fully consumed, move down remaning data */ + if (pv->inbuf_cur) { + pv->inbuf_len -= pv->inbuf_cur; + memmove(pv->inbuf, &pv->inbuf[pv->inbuf_cur], + pv->inbuf_len); + pv->inbuf_cur = 0; + } + + /* Try to get another packet */ + if (hvsi_get_packet(pv)) + tries--; + } + if (!pv->established) { + pr_devel("HVSI@%x: returning -EPIPE\n", pv->termno); + return -EPIPE; + } + return read; +} + +int hvsilib_put_chars(struct hvsi_priv *pv, const char *buf, int count) +{ + struct hvsi_data dp; + int rc, adjcount = min(count, HVSI_MAX_OUTGOING_DATA); + + if (WARN_ON(!pv)) + return -ENODEV; + + dp.hdr.type = VS_DATA_PACKET_HEADER; + dp.hdr.len = adjcount + sizeof(struct hvsi_header); + memcpy(dp.data, buf, adjcount); + rc = hvsi_send_packet(pv, &dp.hdr); + if (rc <= 0) + return rc; + return adjcount; +} + +static void maybe_msleep(unsigned long ms) +{ + /* During early boot, IRQs are disabled, use mdelay */ + if (irqs_disabled()) + mdelay(ms); + else + msleep(ms); +} + +int hvsilib_read_mctrl(struct hvsi_priv *pv) +{ + struct hvsi_query q; + int rc, timeout; + + pr_devel("HVSI@%x: Querying modem control status...\n", + pv->termno); + + pv->mctrl_update = 0; + q.hdr.type = VS_QUERY_PACKET_HEADER; + q.hdr.len = sizeof(struct hvsi_query); + q.verb = cpu_to_be16(VSV_SEND_MODEM_CTL_STATUS); + rc = hvsi_send_packet(pv, &q.hdr); + if (rc <= 0) { + pr_devel("HVSI@%x: Error %d...\n", pv->termno, rc); + return rc; + } + + /* Try for up to 200ms */ + for (timeout = 0; timeout < 20; timeout++) { + if (!pv->established) + return -ENXIO; + if (pv->mctrl_update) + return 0; + if (!hvsi_get_packet(pv)) + maybe_msleep(10); + } + return -EIO; +} + +int hvsilib_write_mctrl(struct hvsi_priv *pv, int dtr) +{ + struct hvsi_control ctrl; + unsigned short mctrl; + + mctrl = pv->mctrl; + if (dtr) + mctrl |= TIOCM_DTR; + else + mctrl &= ~TIOCM_DTR; + if (mctrl == pv->mctrl) + return 0; + pv->mctrl = mctrl; + + pr_devel("HVSI@%x: %s DTR...\n", pv->termno, + dtr ? "Setting" : "Clearing"); + + ctrl.hdr.type = VS_CONTROL_PACKET_HEADER, + ctrl.hdr.len = sizeof(struct hvsi_control); + ctrl.verb = cpu_to_be16(VSV_SET_MODEM_CTL); + ctrl.mask = cpu_to_be32(HVSI_TSDTR); + ctrl.word = cpu_to_be32(dtr ? HVSI_TSDTR : 0); + return hvsi_send_packet(pv, &ctrl.hdr); +} + +void hvsilib_establish(struct hvsi_priv *pv) +{ + int timeout; + + pr_devel("HVSI@%x: Establishing...\n", pv->termno); + + /* Try for up to 200ms, there can be a packet to + * start the process waiting for us... + */ + for (timeout = 0; timeout < 20; timeout++) { + if (pv->established) + goto established; + if (!hvsi_get_packet(pv)) + maybe_msleep(10); + } + + /* Failed, send a close connection packet just + * in case + */ + pr_devel("HVSI@%x: ... sending close\n", pv->termno); + + hvsi_send_close(pv); + + /* Then restart handshake */ + + pr_devel("HVSI@%x: ... restarting handshake\n", pv->termno); + + hvsi_start_handshake(pv); + + pr_devel("HVSI@%x: ... waiting handshake\n", pv->termno); + + /* Try for up to 400ms */ + for (timeout = 0; timeout < 40; timeout++) { + if (pv->established) + goto established; + if (!hvsi_get_packet(pv)) + maybe_msleep(10); + } + + if (!pv->established) { + pr_devel("HVSI@%x: Timeout handshaking, giving up !\n", + pv->termno); + return; + } + established: + /* Query modem control lines */ + + pr_devel("HVSI@%x: ... established, reading mctrl\n", pv->termno); + + hvsilib_read_mctrl(pv); + + /* Set our own DTR */ + + pr_devel("HVSI@%x: ... setting mctrl\n", pv->termno); + + hvsilib_write_mctrl(pv, 1); + + /* Set the opened flag so reads are allowed */ + wmb(); + pv->opened = 1; +} + +int hvsilib_open(struct hvsi_priv *pv, struct hvc_struct *hp) +{ + pr_devel("HVSI@%x: open !\n", pv->termno); + + /* Keep track of the tty data structure */ + pv->tty = tty_port_tty_get(&hp->port); + + hvsilib_establish(pv); + + return 0; +} + +void hvsilib_close(struct hvsi_priv *pv, struct hvc_struct *hp) +{ + unsigned long flags; + + pr_devel("HVSI@%x: close !\n", pv->termno); + + if (!pv->is_console) { + pr_devel("HVSI@%x: Not a console, tearing down\n", + pv->termno); + + /* Clear opened, synchronize with khvcd */ + spin_lock_irqsave(&hp->lock, flags); + pv->opened = 0; + spin_unlock_irqrestore(&hp->lock, flags); + + /* Clear our own DTR */ + if (!pv->tty || (pv->tty->termios.c_cflag & HUPCL)) + hvsilib_write_mctrl(pv, 0); + + /* Tear down the connection */ + hvsi_send_close(pv); + } + + tty_kref_put(pv->tty); + pv->tty = NULL; +} + +void hvsilib_init(struct hvsi_priv *pv, + int (*get_chars)(uint32_t termno, char *buf, int count), + int (*put_chars)(uint32_t termno, const char *buf, + int count), + int termno, int is_console) +{ + memset(pv, 0, sizeof(*pv)); + pv->get_chars = get_chars; + pv->put_chars = put_chars; + pv->termno = termno; + pv->is_console = is_console; +} diff --git a/drivers/tty/ipwireless/Makefile b/drivers/tty/ipwireless/Makefile new file mode 100644 index 000000000..a665d021e --- /dev/null +++ b/drivers/tty/ipwireless/Makefile @@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for the IPWireless driver +# + +obj-$(CONFIG_IPWIRELESS) += ipwireless.o + +ipwireless-y := hardware.o main.o network.o tty.o + diff --git a/drivers/tty/ipwireless/hardware.c b/drivers/tty/ipwireless/hardware.c new file mode 100644 index 000000000..f5d3e68f5 --- /dev/null +++ b/drivers/tty/ipwireless/hardware.c @@ -0,0 +1,1770 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * IPWireless 3G PCMCIA Network Driver + * + * Original code + * by Stephen Blackheath , + * Ben Martel + * + * Copyrighted as follows: + * Copyright (C) 2004 by Symmetric Systems Ltd (NZ) + * + * Various driver changes and rewrites, port to new kernels + * Copyright (C) 2006-2007 Jiri Kosina + * + * Misc code cleanups and updates + * Copyright (C) 2007 David Sterba + */ + +#include +#include +#include +#include +#include +#include + +#include "hardware.h" +#include "setup_protocol.h" +#include "network.h" +#include "main.h" + +static void ipw_send_setup_packet(struct ipw_hardware *hw); +static void handle_received_SETUP_packet(struct ipw_hardware *ipw, + unsigned int address, + const unsigned char *data, int len, + int is_last); +static void ipwireless_setup_timer(struct timer_list *t); +static void handle_received_CTRL_packet(struct ipw_hardware *hw, + unsigned int channel_idx, const unsigned char *data, int len); + +/*#define TIMING_DIAGNOSTICS*/ + +#ifdef TIMING_DIAGNOSTICS + +static struct timing_stats { + unsigned long last_report_time; + unsigned long read_time; + unsigned long write_time; + unsigned long read_bytes; + unsigned long write_bytes; + unsigned long start_time; +}; + +static void start_timing(void) +{ + timing_stats.start_time = jiffies; +} + +static void end_read_timing(unsigned length) +{ + timing_stats.read_time += (jiffies - start_time); + timing_stats.read_bytes += length + 2; + report_timing(); +} + +static void end_write_timing(unsigned length) +{ + timing_stats.write_time += (jiffies - start_time); + timing_stats.write_bytes += length + 2; + report_timing(); +} + +static void report_timing(void) +{ + unsigned long since = jiffies - timing_stats.last_report_time; + + /* If it's been more than one second... */ + if (since >= HZ) { + int first = (timing_stats.last_report_time == 0); + + timing_stats.last_report_time = jiffies; + if (!first) + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": %u us elapsed - read %lu bytes in %u us, wrote %lu bytes in %u us\n", + jiffies_to_usecs(since), + timing_stats.read_bytes, + jiffies_to_usecs(timing_stats.read_time), + timing_stats.write_bytes, + jiffies_to_usecs(timing_stats.write_time)); + + timing_stats.read_time = 0; + timing_stats.write_time = 0; + timing_stats.read_bytes = 0; + timing_stats.write_bytes = 0; + } +} +#else +static void start_timing(void) { } +static void end_read_timing(unsigned length) { } +static void end_write_timing(unsigned length) { } +#endif + +/* Imported IPW definitions */ + +#define LL_MTU_V1 318 +#define LL_MTU_V2 250 +#define LL_MTU_MAX (LL_MTU_V1 > LL_MTU_V2 ? LL_MTU_V1 : LL_MTU_V2) + +#define PRIO_DATA 2 +#define PRIO_CTRL 1 +#define PRIO_SETUP 0 + +/* Addresses */ +#define ADDR_SETUP_PROT 0 + +/* Protocol ids */ +enum { + /* Identifier for the Com Data protocol */ + TL_PROTOCOLID_COM_DATA = 0, + + /* Identifier for the Com Control protocol */ + TL_PROTOCOLID_COM_CTRL = 1, + + /* Identifier for the Setup protocol */ + TL_PROTOCOLID_SETUP = 2 +}; + +/* Number of bytes in NL packet header (cannot do + * sizeof(nl_packet_header) since it's a bitfield) */ +#define NL_FIRST_PACKET_HEADER_SIZE 3 + +/* Number of bytes in NL packet header (cannot do + * sizeof(nl_packet_header) since it's a bitfield) */ +#define NL_FOLLOWING_PACKET_HEADER_SIZE 1 + +struct nl_first_packet_header { + unsigned char protocol:3; + unsigned char address:3; + unsigned char packet_rank:2; + unsigned char length_lsb; + unsigned char length_msb; +}; + +struct nl_packet_header { + unsigned char protocol:3; + unsigned char address:3; + unsigned char packet_rank:2; +}; + +/* Value of 'packet_rank' above */ +#define NL_INTERMEDIATE_PACKET 0x0 +#define NL_LAST_PACKET 0x1 +#define NL_FIRST_PACKET 0x2 + +union nl_packet { + /* Network packet header of the first packet (a special case) */ + struct nl_first_packet_header hdr_first; + /* Network packet header of the following packets (if any) */ + struct nl_packet_header hdr; + /* Complete network packet (header + data) */ + unsigned char rawpkt[LL_MTU_MAX]; +} __attribute__ ((__packed__)); + +#define HW_VERSION_UNKNOWN -1 +#define HW_VERSION_1 1 +#define HW_VERSION_2 2 + +/* IPW I/O ports */ +#define IOIER 0x00 /* Interrupt Enable Register */ +#define IOIR 0x02 /* Interrupt Source/ACK register */ +#define IODCR 0x04 /* Data Control Register */ +#define IODRR 0x06 /* Data Read Register */ +#define IODWR 0x08 /* Data Write Register */ +#define IOESR 0x0A /* Embedded Driver Status Register */ +#define IORXR 0x0C /* Rx Fifo Register (Host to Embedded) */ +#define IOTXR 0x0E /* Tx Fifo Register (Embedded to Host) */ + +/* I/O ports and bit definitions for version 1 of the hardware */ + +/* IER bits*/ +#define IER_RXENABLED 0x1 +#define IER_TXENABLED 0x2 + +/* ISR bits */ +#define IR_RXINTR 0x1 +#define IR_TXINTR 0x2 + +/* DCR bits */ +#define DCR_RXDONE 0x1 +#define DCR_TXDONE 0x2 +#define DCR_RXRESET 0x4 +#define DCR_TXRESET 0x8 + +/* I/O ports and bit definitions for version 2 of the hardware */ + +struct MEMCCR { + unsigned short reg_config_option; /* PCCOR: Configuration Option Register */ + unsigned short reg_config_and_status; /* PCCSR: Configuration and Status Register */ + unsigned short reg_pin_replacement; /* PCPRR: Pin Replacemant Register */ + unsigned short reg_socket_and_copy; /* PCSCR: Socket and Copy Register */ + unsigned short reg_ext_status; /* PCESR: Extendend Status Register */ + unsigned short reg_io_base; /* PCIOB: I/O Base Register */ +}; + +struct MEMINFREG { + unsigned short memreg_tx_old; /* TX Register (R/W) */ + unsigned short pad1; + unsigned short memreg_rx_done; /* RXDone Register (R/W) */ + unsigned short pad2; + unsigned short memreg_rx; /* RX Register (R/W) */ + unsigned short pad3; + unsigned short memreg_pc_interrupt_ack; /* PC intr Ack Register (W) */ + unsigned short pad4; + unsigned long memreg_card_present;/* Mask for Host to check (R) for + * CARD_PRESENT_VALUE */ + unsigned short memreg_tx_new; /* TX2 (new) Register (R/W) */ +}; + +#define CARD_PRESENT_VALUE (0xBEEFCAFEUL) + +#define MEMTX_TX 0x0001 +#define MEMRX_RX 0x0001 +#define MEMRX_RX_DONE 0x0001 +#define MEMRX_PCINTACKK 0x0001 + +#define NL_NUM_OF_PRIORITIES 3 +#define NL_NUM_OF_PROTOCOLS 3 +#define NL_NUM_OF_ADDRESSES NO_OF_IPW_CHANNELS + +struct ipw_hardware { + unsigned int base_port; + short hw_version; + unsigned short ll_mtu; + spinlock_t lock; + + int initializing; + int init_loops; + struct timer_list setup_timer; + + /* Flag if hw is ready to send next packet */ + int tx_ready; + /* Count of pending packets to be sent */ + int tx_queued; + struct list_head tx_queue[NL_NUM_OF_PRIORITIES]; + + int rx_bytes_queued; + struct list_head rx_queue; + /* Pool of rx_packet structures that are not currently used. */ + struct list_head rx_pool; + int rx_pool_size; + /* True if reception of data is blocked while userspace processes it. */ + int blocking_rx; + /* True if there is RX data ready on the hardware. */ + int rx_ready; + unsigned short last_memtx_serial; + /* + * Newer versions of the V2 card firmware send serial numbers in the + * MemTX register. 'serial_number_detected' is set true when we detect + * a non-zero serial number (indicating the new firmware). Thereafter, + * the driver can safely ignore the Timer Recovery re-sends to avoid + * out-of-sync problems. + */ + int serial_number_detected; + struct work_struct work_rx; + + /* True if we are to send the set-up data to the hardware. */ + int to_setup; + + /* Card has been removed */ + int removed; + /* Saved irq value when we disable the interrupt. */ + int irq; + /* True if this driver is shutting down. */ + int shutting_down; + /* Modem control lines */ + unsigned int control_lines[NL_NUM_OF_ADDRESSES]; + struct ipw_rx_packet *packet_assembler[NL_NUM_OF_ADDRESSES]; + + struct tasklet_struct tasklet; + + /* The handle for the network layer, for the sending of events to it. */ + struct ipw_network *network; + struct MEMINFREG __iomem *memory_info_regs; + struct MEMCCR __iomem *memregs_CCR; + void (*reboot_callback) (void *data); + void *reboot_callback_data; + + unsigned short __iomem *memreg_tx; +}; + +/* + * Packet info structure for tx packets. + * Note: not all the fields defined here are required for all protocols + */ +struct ipw_tx_packet { + struct list_head queue; + /* channel idx + 1 */ + unsigned char dest_addr; + /* SETUP, CTRL or DATA */ + unsigned char protocol; + /* Length of data block, which starts at the end of this structure */ + unsigned short length; + /* Sending state */ + /* Offset of where we've sent up to so far */ + unsigned long offset; + /* Count of packet fragments, starting at 0 */ + int fragment_count; + + /* Called after packet is sent and before is freed */ + void (*packet_callback) (void *cb_data, unsigned int packet_length); + void *callback_data; +}; + +/* Signals from DTE */ +#define COMCTRL_RTS 0 +#define COMCTRL_DTR 1 + +/* Signals from DCE */ +#define COMCTRL_CTS 2 +#define COMCTRL_DCD 3 +#define COMCTRL_DSR 4 +#define COMCTRL_RI 5 + +struct ipw_control_packet_body { + /* DTE signal or DCE signal */ + unsigned char sig_no; + /* 0: set signal, 1: clear signal */ + unsigned char value; +} __attribute__ ((__packed__)); + +struct ipw_control_packet { + struct ipw_tx_packet header; + struct ipw_control_packet_body body; +}; + +struct ipw_rx_packet { + struct list_head queue; + unsigned int capacity; + unsigned int length; + unsigned int protocol; + unsigned int channel_idx; +}; + +static char *data_type(const unsigned char *buf, unsigned length) +{ + struct nl_packet_header *hdr = (struct nl_packet_header *) buf; + + if (length == 0) + return " "; + + if (hdr->packet_rank & NL_FIRST_PACKET) { + switch (hdr->protocol) { + case TL_PROTOCOLID_COM_DATA: return "DATA "; + case TL_PROTOCOLID_COM_CTRL: return "CTRL "; + case TL_PROTOCOLID_SETUP: return "SETUP"; + default: return "???? "; + } + } else + return " "; +} + +#define DUMP_MAX_BYTES 64 + +static void dump_data_bytes(const char *type, const unsigned char *data, + unsigned length) +{ + char prefix[56]; + + sprintf(prefix, IPWIRELESS_PCCARD_NAME ": %s %s ", + type, data_type(data, length)); + print_hex_dump_bytes(prefix, 0, (void *)data, + length < DUMP_MAX_BYTES ? length : DUMP_MAX_BYTES); +} + +static void swap_packet_bitfield_to_le(unsigned char *data) +{ +#ifdef __BIG_ENDIAN_BITFIELD + unsigned char tmp = *data, ret = 0; + + /* + * transform bits from aa.bbb.ccc to ccc.bbb.aa + */ + ret |= (tmp & 0xc0) >> 6; + ret |= (tmp & 0x38) >> 1; + ret |= (tmp & 0x07) << 5; + *data = ret & 0xff; +#endif +} + +static void swap_packet_bitfield_from_le(unsigned char *data) +{ +#ifdef __BIG_ENDIAN_BITFIELD + unsigned char tmp = *data, ret = 0; + + /* + * transform bits from ccc.bbb.aa to aa.bbb.ccc + */ + ret |= (tmp & 0xe0) >> 5; + ret |= (tmp & 0x1c) << 1; + ret |= (tmp & 0x03) << 6; + *data = ret & 0xff; +#endif +} + +static void do_send_fragment(struct ipw_hardware *hw, unsigned char *data, + unsigned length) +{ + unsigned i; + unsigned long flags; + + start_timing(); + BUG_ON(length > hw->ll_mtu); + + if (ipwireless_debug) + dump_data_bytes("send", data, length); + + spin_lock_irqsave(&hw->lock, flags); + + hw->tx_ready = 0; + swap_packet_bitfield_to_le(data); + + if (hw->hw_version == HW_VERSION_1) { + outw((unsigned short) length, hw->base_port + IODWR); + + for (i = 0; i < length; i += 2) { + unsigned short d = data[i]; + __le16 raw_data; + + if (i + 1 < length) + d |= data[i + 1] << 8; + raw_data = cpu_to_le16(d); + outw(raw_data, hw->base_port + IODWR); + } + + outw(DCR_TXDONE, hw->base_port + IODCR); + } else if (hw->hw_version == HW_VERSION_2) { + outw((unsigned short) length, hw->base_port); + + for (i = 0; i < length; i += 2) { + unsigned short d = data[i]; + __le16 raw_data; + + if (i + 1 < length) + d |= data[i + 1] << 8; + raw_data = cpu_to_le16(d); + outw(raw_data, hw->base_port); + } + while ((i & 3) != 2) { + outw((unsigned short) 0xDEAD, hw->base_port); + i += 2; + } + writew(MEMRX_RX, &hw->memory_info_regs->memreg_rx); + } + + spin_unlock_irqrestore(&hw->lock, flags); + + end_write_timing(length); +} + +static void do_send_packet(struct ipw_hardware *hw, struct ipw_tx_packet *packet) +{ + unsigned short fragment_data_len; + unsigned short data_left = packet->length - packet->offset; + unsigned short header_size; + union nl_packet pkt; + + header_size = + (packet->fragment_count == 0) + ? NL_FIRST_PACKET_HEADER_SIZE + : NL_FOLLOWING_PACKET_HEADER_SIZE; + fragment_data_len = hw->ll_mtu - header_size; + if (data_left < fragment_data_len) + fragment_data_len = data_left; + + /* + * hdr_first is now in machine bitfield order, which will be swapped + * to le just before it goes to hw + */ + pkt.hdr_first.protocol = packet->protocol; + pkt.hdr_first.address = packet->dest_addr; + pkt.hdr_first.packet_rank = 0; + + /* First packet? */ + if (packet->fragment_count == 0) { + pkt.hdr_first.packet_rank |= NL_FIRST_PACKET; + pkt.hdr_first.length_lsb = (unsigned char) packet->length; + pkt.hdr_first.length_msb = + (unsigned char) (packet->length >> 8); + } + + memcpy(pkt.rawpkt + header_size, + ((unsigned char *) packet) + sizeof(struct ipw_tx_packet) + + packet->offset, fragment_data_len); + packet->offset += fragment_data_len; + packet->fragment_count++; + + /* Last packet? (May also be first packet.) */ + if (packet->offset == packet->length) + pkt.hdr_first.packet_rank |= NL_LAST_PACKET; + do_send_fragment(hw, pkt.rawpkt, header_size + fragment_data_len); + + /* If this packet has unsent data, then re-queue it. */ + if (packet->offset < packet->length) { + /* + * Re-queue it at the head of the highest priority queue so + * it goes before all other packets + */ + unsigned long flags; + + spin_lock_irqsave(&hw->lock, flags); + list_add(&packet->queue, &hw->tx_queue[0]); + hw->tx_queued++; + spin_unlock_irqrestore(&hw->lock, flags); + } else { + if (packet->packet_callback) + packet->packet_callback(packet->callback_data, + packet->length); + kfree(packet); + } +} + +static void ipw_setup_hardware(struct ipw_hardware *hw) +{ + unsigned long flags; + + spin_lock_irqsave(&hw->lock, flags); + if (hw->hw_version == HW_VERSION_1) { + /* Reset RX FIFO */ + outw(DCR_RXRESET, hw->base_port + IODCR); + /* SB: Reset TX FIFO */ + outw(DCR_TXRESET, hw->base_port + IODCR); + + /* Enable TX and RX interrupts. */ + outw(IER_TXENABLED | IER_RXENABLED, hw->base_port + IOIER); + } else { + /* + * Set INTRACK bit (bit 0), which means we must explicitly + * acknowledge interrupts by clearing bit 2 of reg_config_and_status. + */ + unsigned short csr = readw(&hw->memregs_CCR->reg_config_and_status); + + csr |= 1; + writew(csr, &hw->memregs_CCR->reg_config_and_status); + } + spin_unlock_irqrestore(&hw->lock, flags); +} + +/* + * If 'packet' is NULL, then this function allocates a new packet, setting its + * length to 0 and ensuring it has the specified minimum amount of free space. + * + * If 'packet' is not NULL, then this function enlarges it if it doesn't + * have the specified minimum amount of free space. + * + */ +static struct ipw_rx_packet *pool_allocate(struct ipw_hardware *hw, + struct ipw_rx_packet *packet, + int minimum_free_space) +{ + + if (!packet) { + unsigned long flags; + + spin_lock_irqsave(&hw->lock, flags); + if (!list_empty(&hw->rx_pool)) { + packet = list_first_entry(&hw->rx_pool, + struct ipw_rx_packet, queue); + hw->rx_pool_size--; + spin_unlock_irqrestore(&hw->lock, flags); + list_del(&packet->queue); + } else { + const int min_capacity = + ipwireless_ppp_mru(hw->network) + 2; + int new_capacity; + + spin_unlock_irqrestore(&hw->lock, flags); + new_capacity = + (minimum_free_space > min_capacity + ? minimum_free_space + : min_capacity); + packet = kmalloc(sizeof(struct ipw_rx_packet) + + new_capacity, GFP_ATOMIC); + if (!packet) + return NULL; + packet->capacity = new_capacity; + } + packet->length = 0; + } + + if (packet->length + minimum_free_space > packet->capacity) { + struct ipw_rx_packet *old_packet = packet; + + packet = kmalloc(sizeof(struct ipw_rx_packet) + + old_packet->length + minimum_free_space, + GFP_ATOMIC); + if (!packet) { + kfree(old_packet); + return NULL; + } + memcpy(packet, old_packet, + sizeof(struct ipw_rx_packet) + + old_packet->length); + packet->capacity = old_packet->length + minimum_free_space; + kfree(old_packet); + } + + return packet; +} + +static void pool_free(struct ipw_hardware *hw, struct ipw_rx_packet *packet) +{ + if (hw->rx_pool_size > 6) + kfree(packet); + else { + hw->rx_pool_size++; + list_add(&packet->queue, &hw->rx_pool); + } +} + +static void queue_received_packet(struct ipw_hardware *hw, + unsigned int protocol, + unsigned int address, + const unsigned char *data, int length, + int is_last) +{ + unsigned int channel_idx = address - 1; + struct ipw_rx_packet *packet = NULL; + unsigned long flags; + + /* Discard packet if channel index is out of range. */ + if (channel_idx >= NL_NUM_OF_ADDRESSES) { + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": data packet has bad address %u\n", address); + return; + } + + /* + * ->packet_assembler is safe to touch unlocked, this is the only place + */ + if (protocol == TL_PROTOCOLID_COM_DATA) { + struct ipw_rx_packet **assem = + &hw->packet_assembler[channel_idx]; + + /* + * Create a new packet, or assembler already contains one + * enlarge it by 'length' bytes. + */ + (*assem) = pool_allocate(hw, *assem, length); + if (!(*assem)) { + printk(KERN_ERR IPWIRELESS_PCCARD_NAME + ": no memory for incoming data packet, dropped!\n"); + return; + } + (*assem)->protocol = protocol; + (*assem)->channel_idx = channel_idx; + + /* Append this packet data onto existing data. */ + memcpy((unsigned char *)(*assem) + + sizeof(struct ipw_rx_packet) + + (*assem)->length, data, length); + (*assem)->length += length; + if (is_last) { + packet = *assem; + *assem = NULL; + /* Count queued DATA bytes only */ + spin_lock_irqsave(&hw->lock, flags); + hw->rx_bytes_queued += packet->length; + spin_unlock_irqrestore(&hw->lock, flags); + } + } else { + /* If it's a CTRL packet, don't assemble, just queue it. */ + packet = pool_allocate(hw, NULL, length); + if (!packet) { + printk(KERN_ERR IPWIRELESS_PCCARD_NAME + ": no memory for incoming ctrl packet, dropped!\n"); + return; + } + packet->protocol = protocol; + packet->channel_idx = channel_idx; + memcpy((unsigned char *)packet + sizeof(struct ipw_rx_packet), + data, length); + packet->length = length; + } + + /* + * If this is the last packet, then send the assembled packet on to the + * network layer. + */ + if (packet) { + spin_lock_irqsave(&hw->lock, flags); + list_add_tail(&packet->queue, &hw->rx_queue); + /* Block reception of incoming packets if queue is full. */ + hw->blocking_rx = + (hw->rx_bytes_queued >= IPWIRELESS_RX_QUEUE_SIZE); + + spin_unlock_irqrestore(&hw->lock, flags); + schedule_work(&hw->work_rx); + } +} + +/* + * Workqueue callback + */ +static void ipw_receive_data_work(struct work_struct *work_rx) +{ + struct ipw_hardware *hw = + container_of(work_rx, struct ipw_hardware, work_rx); + unsigned long flags; + + spin_lock_irqsave(&hw->lock, flags); + while (!list_empty(&hw->rx_queue)) { + struct ipw_rx_packet *packet = + list_first_entry(&hw->rx_queue, + struct ipw_rx_packet, queue); + + if (hw->shutting_down) + break; + list_del(&packet->queue); + + /* + * Note: ipwireless_network_packet_received must be called in a + * process context (i.e. via schedule_work) because the tty + * output code can sleep in the tty_flip_buffer_push call. + */ + if (packet->protocol == TL_PROTOCOLID_COM_DATA) { + if (hw->network != NULL) { + /* If the network hasn't been disconnected. */ + spin_unlock_irqrestore(&hw->lock, flags); + /* + * This must run unlocked due to tty processing + * and mutex locking + */ + ipwireless_network_packet_received( + hw->network, + packet->channel_idx, + (unsigned char *)packet + + sizeof(struct ipw_rx_packet), + packet->length); + spin_lock_irqsave(&hw->lock, flags); + } + /* Count queued DATA bytes only */ + hw->rx_bytes_queued -= packet->length; + } else { + /* + * This is safe to be called locked, callchain does + * not block + */ + handle_received_CTRL_packet(hw, packet->channel_idx, + (unsigned char *)packet + + sizeof(struct ipw_rx_packet), + packet->length); + } + pool_free(hw, packet); + /* + * Unblock reception of incoming packets if queue is no longer + * full. + */ + hw->blocking_rx = + hw->rx_bytes_queued >= IPWIRELESS_RX_QUEUE_SIZE; + if (hw->shutting_down) + break; + } + spin_unlock_irqrestore(&hw->lock, flags); +} + +static void handle_received_CTRL_packet(struct ipw_hardware *hw, + unsigned int channel_idx, + const unsigned char *data, int len) +{ + const struct ipw_control_packet_body *body = + (const struct ipw_control_packet_body *) data; + unsigned int changed_mask; + + if (len != sizeof(struct ipw_control_packet_body)) { + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": control packet was %d bytes - wrong size!\n", + len); + return; + } + + switch (body->sig_no) { + case COMCTRL_CTS: + changed_mask = IPW_CONTROL_LINE_CTS; + break; + case COMCTRL_DCD: + changed_mask = IPW_CONTROL_LINE_DCD; + break; + case COMCTRL_DSR: + changed_mask = IPW_CONTROL_LINE_DSR; + break; + case COMCTRL_RI: + changed_mask = IPW_CONTROL_LINE_RI; + break; + default: + changed_mask = 0; + } + + if (changed_mask != 0) { + if (body->value) + hw->control_lines[channel_idx] |= changed_mask; + else + hw->control_lines[channel_idx] &= ~changed_mask; + if (hw->network) + ipwireless_network_notify_control_line_change( + hw->network, + channel_idx, + hw->control_lines[channel_idx], + changed_mask); + } +} + +static void handle_received_packet(struct ipw_hardware *hw, + const union nl_packet *packet, + unsigned short len) +{ + unsigned int protocol = packet->hdr.protocol; + unsigned int address = packet->hdr.address; + unsigned int header_length; + const unsigned char *data; + unsigned int data_len; + int is_last = packet->hdr.packet_rank & NL_LAST_PACKET; + + if (packet->hdr.packet_rank & NL_FIRST_PACKET) + header_length = NL_FIRST_PACKET_HEADER_SIZE; + else + header_length = NL_FOLLOWING_PACKET_HEADER_SIZE; + + data = packet->rawpkt + header_length; + data_len = len - header_length; + switch (protocol) { + case TL_PROTOCOLID_COM_DATA: + case TL_PROTOCOLID_COM_CTRL: + queue_received_packet(hw, protocol, address, data, data_len, + is_last); + break; + case TL_PROTOCOLID_SETUP: + handle_received_SETUP_packet(hw, address, data, data_len, + is_last); + break; + } +} + +static void acknowledge_data_read(struct ipw_hardware *hw) +{ + if (hw->hw_version == HW_VERSION_1) + outw(DCR_RXDONE, hw->base_port + IODCR); + else + writew(MEMRX_PCINTACKK, + &hw->memory_info_regs->memreg_pc_interrupt_ack); +} + +/* + * Retrieve a packet from the IPW hardware. + */ +static void do_receive_packet(struct ipw_hardware *hw) +{ + unsigned len; + unsigned i; + unsigned char pkt[LL_MTU_MAX]; + + start_timing(); + + if (hw->hw_version == HW_VERSION_1) { + len = inw(hw->base_port + IODRR); + if (len > hw->ll_mtu) { + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": received a packet of %u bytes - longer than the MTU!\n", len); + outw(DCR_RXDONE | DCR_RXRESET, hw->base_port + IODCR); + return; + } + + for (i = 0; i < len; i += 2) { + __le16 raw_data = inw(hw->base_port + IODRR); + unsigned short data = le16_to_cpu(raw_data); + + pkt[i] = (unsigned char) data; + pkt[i + 1] = (unsigned char) (data >> 8); + } + } else { + len = inw(hw->base_port); + if (len > hw->ll_mtu) { + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": received a packet of %u bytes - longer than the MTU!\n", len); + writew(MEMRX_PCINTACKK, + &hw->memory_info_regs->memreg_pc_interrupt_ack); + return; + } + + for (i = 0; i < len; i += 2) { + __le16 raw_data = inw(hw->base_port); + unsigned short data = le16_to_cpu(raw_data); + + pkt[i] = (unsigned char) data; + pkt[i + 1] = (unsigned char) (data >> 8); + } + + while ((i & 3) != 2) { + inw(hw->base_port); + i += 2; + } + } + + acknowledge_data_read(hw); + + swap_packet_bitfield_from_le(pkt); + + if (ipwireless_debug) + dump_data_bytes("recv", pkt, len); + + handle_received_packet(hw, (union nl_packet *) pkt, len); + + end_read_timing(len); +} + +static int get_current_packet_priority(struct ipw_hardware *hw) +{ + /* + * If we're initializing, don't send anything of higher priority than + * PRIO_SETUP. The network layer therefore need not care about + * hardware initialization - any of its stuff will simply be queued + * until setup is complete. + */ + return (hw->to_setup || hw->initializing + ? PRIO_SETUP + 1 : NL_NUM_OF_PRIORITIES); +} + +/* + * return 1 if something has been received from hw + */ +static int get_packets_from_hw(struct ipw_hardware *hw) +{ + int received = 0; + unsigned long flags; + + spin_lock_irqsave(&hw->lock, flags); + while (hw->rx_ready && !hw->blocking_rx) { + received = 1; + hw->rx_ready--; + spin_unlock_irqrestore(&hw->lock, flags); + + do_receive_packet(hw); + + spin_lock_irqsave(&hw->lock, flags); + } + spin_unlock_irqrestore(&hw->lock, flags); + + return received; +} + +/* + * Send pending packet up to given priority, prioritize SETUP data until + * hardware is fully setup. + * + * return 1 if more packets can be sent + */ +static int send_pending_packet(struct ipw_hardware *hw, int priority_limit) +{ + int more_to_send = 0; + unsigned long flags; + + spin_lock_irqsave(&hw->lock, flags); + if (hw->tx_queued && hw->tx_ready) { + int priority; + struct ipw_tx_packet *packet = NULL; + + /* Pick a packet */ + for (priority = 0; priority < priority_limit; priority++) { + if (!list_empty(&hw->tx_queue[priority])) { + packet = list_first_entry( + &hw->tx_queue[priority], + struct ipw_tx_packet, + queue); + + hw->tx_queued--; + list_del(&packet->queue); + + break; + } + } + if (!packet) { + hw->tx_queued = 0; + spin_unlock_irqrestore(&hw->lock, flags); + return 0; + } + + spin_unlock_irqrestore(&hw->lock, flags); + + /* Send */ + do_send_packet(hw, packet); + + /* Check if more to send */ + spin_lock_irqsave(&hw->lock, flags); + for (priority = 0; priority < priority_limit; priority++) + if (!list_empty(&hw->tx_queue[priority])) { + more_to_send = 1; + break; + } + + if (!more_to_send) + hw->tx_queued = 0; + } + spin_unlock_irqrestore(&hw->lock, flags); + + return more_to_send; +} + +/* + * Send and receive all queued packets. + */ +static void ipwireless_do_tasklet(struct tasklet_struct *t) +{ + struct ipw_hardware *hw = from_tasklet(hw, t, tasklet); + unsigned long flags; + + spin_lock_irqsave(&hw->lock, flags); + if (hw->shutting_down) { + spin_unlock_irqrestore(&hw->lock, flags); + return; + } + + if (hw->to_setup == 1) { + /* + * Initial setup data sent to hardware + */ + hw->to_setup = 2; + spin_unlock_irqrestore(&hw->lock, flags); + + ipw_setup_hardware(hw); + ipw_send_setup_packet(hw); + + send_pending_packet(hw, PRIO_SETUP + 1); + get_packets_from_hw(hw); + } else { + int priority_limit = get_current_packet_priority(hw); + int again; + + spin_unlock_irqrestore(&hw->lock, flags); + + do { + again = send_pending_packet(hw, priority_limit); + again |= get_packets_from_hw(hw); + } while (again); + } +} + +/* + * return true if the card is physically present. + */ +static int is_card_present(struct ipw_hardware *hw) +{ + if (hw->hw_version == HW_VERSION_1) + return inw(hw->base_port + IOIR) != 0xFFFF; + else + return readl(&hw->memory_info_regs->memreg_card_present) == + CARD_PRESENT_VALUE; +} + +static irqreturn_t ipwireless_handle_v1_interrupt(int irq, + struct ipw_hardware *hw) +{ + unsigned short irqn; + + irqn = inw(hw->base_port + IOIR); + + /* Check if card is present */ + if (irqn == 0xFFFF) + return IRQ_NONE; + else if (irqn != 0) { + unsigned short ack = 0; + unsigned long flags; + + /* Transmit complete. */ + if (irqn & IR_TXINTR) { + ack |= IR_TXINTR; + spin_lock_irqsave(&hw->lock, flags); + hw->tx_ready = 1; + spin_unlock_irqrestore(&hw->lock, flags); + } + /* Received data */ + if (irqn & IR_RXINTR) { + ack |= IR_RXINTR; + spin_lock_irqsave(&hw->lock, flags); + hw->rx_ready++; + spin_unlock_irqrestore(&hw->lock, flags); + } + if (ack != 0) { + outw(ack, hw->base_port + IOIR); + tasklet_schedule(&hw->tasklet); + } + return IRQ_HANDLED; + } + return IRQ_NONE; +} + +static void acknowledge_pcmcia_interrupt(struct ipw_hardware *hw) +{ + unsigned short csr = readw(&hw->memregs_CCR->reg_config_and_status); + + csr &= 0xfffd; + writew(csr, &hw->memregs_CCR->reg_config_and_status); +} + +static irqreturn_t ipwireless_handle_v2_v3_interrupt(int irq, + struct ipw_hardware *hw) +{ + int tx = 0; + int rx = 0; + int rx_repeat = 0; + int try_mem_tx_old; + unsigned long flags; + + do { + + unsigned short memtx = readw(hw->memreg_tx); + unsigned short memtx_serial; + unsigned short memrxdone = + readw(&hw->memory_info_regs->memreg_rx_done); + + try_mem_tx_old = 0; + + /* check whether the interrupt was generated by ipwireless card */ + if (!(memtx & MEMTX_TX) && !(memrxdone & MEMRX_RX_DONE)) { + + /* check if the card uses memreg_tx_old register */ + if (hw->memreg_tx == &hw->memory_info_regs->memreg_tx_new) { + memtx = readw(&hw->memory_info_regs->memreg_tx_old); + if (memtx & MEMTX_TX) { + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": Using memreg_tx_old\n"); + hw->memreg_tx = + &hw->memory_info_regs->memreg_tx_old; + } else { + return IRQ_NONE; + } + } else + return IRQ_NONE; + } + + /* + * See if the card is physically present. Note that while it is + * powering up, it appears not to be present. + */ + if (!is_card_present(hw)) { + acknowledge_pcmcia_interrupt(hw); + return IRQ_HANDLED; + } + + memtx_serial = memtx & (unsigned short) 0xff00; + if (memtx & MEMTX_TX) { + writew(memtx_serial, hw->memreg_tx); + + if (hw->serial_number_detected) { + if (memtx_serial != hw->last_memtx_serial) { + hw->last_memtx_serial = memtx_serial; + spin_lock_irqsave(&hw->lock, flags); + hw->rx_ready++; + spin_unlock_irqrestore(&hw->lock, flags); + rx = 1; + } else + /* Ignore 'Timer Recovery' duplicates. */ + rx_repeat = 1; + } else { + /* + * If a non-zero serial number is seen, then enable + * serial number checking. + */ + if (memtx_serial != 0) { + hw->serial_number_detected = 1; + printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME + ": memreg_tx serial num detected\n"); + + spin_lock_irqsave(&hw->lock, flags); + hw->rx_ready++; + spin_unlock_irqrestore(&hw->lock, flags); + } + rx = 1; + } + } + if (memrxdone & MEMRX_RX_DONE) { + writew(0, &hw->memory_info_regs->memreg_rx_done); + spin_lock_irqsave(&hw->lock, flags); + hw->tx_ready = 1; + spin_unlock_irqrestore(&hw->lock, flags); + tx = 1; + } + if (tx) + writew(MEMRX_PCINTACKK, + &hw->memory_info_regs->memreg_pc_interrupt_ack); + + acknowledge_pcmcia_interrupt(hw); + + if (tx || rx) + tasklet_schedule(&hw->tasklet); + else if (!rx_repeat) { + if (hw->memreg_tx == &hw->memory_info_regs->memreg_tx_new) { + if (hw->serial_number_detected) + printk(KERN_WARNING IPWIRELESS_PCCARD_NAME + ": spurious interrupt - new_tx mode\n"); + else { + printk(KERN_WARNING IPWIRELESS_PCCARD_NAME + ": no valid memreg_tx value - switching to the old memreg_tx\n"); + hw->memreg_tx = + &hw->memory_info_regs->memreg_tx_old; + try_mem_tx_old = 1; + } + } else + printk(KERN_WARNING IPWIRELESS_PCCARD_NAME + ": spurious interrupt - old_tx mode\n"); + } + + } while (try_mem_tx_old == 1); + + return IRQ_HANDLED; +} + +irqreturn_t ipwireless_interrupt(int irq, void *dev_id) +{ + struct ipw_dev *ipw = dev_id; + + if (ipw->hardware->hw_version == HW_VERSION_1) + return ipwireless_handle_v1_interrupt(irq, ipw->hardware); + else + return ipwireless_handle_v2_v3_interrupt(irq, ipw->hardware); +} + +static void flush_packets_to_hw(struct ipw_hardware *hw) +{ + int priority_limit; + unsigned long flags; + + spin_lock_irqsave(&hw->lock, flags); + priority_limit = get_current_packet_priority(hw); + spin_unlock_irqrestore(&hw->lock, flags); + + while (send_pending_packet(hw, priority_limit)); +} + +static void send_packet(struct ipw_hardware *hw, int priority, + struct ipw_tx_packet *packet) +{ + unsigned long flags; + + spin_lock_irqsave(&hw->lock, flags); + list_add_tail(&packet->queue, &hw->tx_queue[priority]); + hw->tx_queued++; + spin_unlock_irqrestore(&hw->lock, flags); + + flush_packets_to_hw(hw); +} + +/* Create data packet, non-atomic allocation */ +static void *alloc_data_packet(int data_size, + unsigned char dest_addr, + unsigned char protocol) +{ + struct ipw_tx_packet *packet = kzalloc( + sizeof(struct ipw_tx_packet) + data_size, + GFP_ATOMIC); + + if (!packet) + return NULL; + + INIT_LIST_HEAD(&packet->queue); + packet->dest_addr = dest_addr; + packet->protocol = protocol; + packet->length = data_size; + + return packet; +} + +static void *alloc_ctrl_packet(int header_size, + unsigned char dest_addr, + unsigned char protocol, + unsigned char sig_no) +{ + /* + * sig_no is located right after ipw_tx_packet struct in every + * CTRL or SETUP packets, we can use ipw_control_packet as a + * common struct + */ + struct ipw_control_packet *packet = kzalloc(header_size, GFP_ATOMIC); + + if (!packet) + return NULL; + + INIT_LIST_HEAD(&packet->header.queue); + packet->header.dest_addr = dest_addr; + packet->header.protocol = protocol; + packet->header.length = header_size - sizeof(struct ipw_tx_packet); + packet->body.sig_no = sig_no; + + return packet; +} + +int ipwireless_send_packet(struct ipw_hardware *hw, unsigned int channel_idx, + const unsigned char *data, unsigned int length, + void (*callback) (void *cb, unsigned int length), + void *callback_data) +{ + struct ipw_tx_packet *packet; + + packet = alloc_data_packet(length, (channel_idx + 1), + TL_PROTOCOLID_COM_DATA); + if (!packet) + return -ENOMEM; + packet->packet_callback = callback; + packet->callback_data = callback_data; + memcpy((unsigned char *) packet + sizeof(struct ipw_tx_packet), data, + length); + + send_packet(hw, PRIO_DATA, packet); + return 0; +} + +static int set_control_line(struct ipw_hardware *hw, int prio, + unsigned int channel_idx, int line, int state) +{ + struct ipw_control_packet *packet; + int protocolid = TL_PROTOCOLID_COM_CTRL; + + if (prio == PRIO_SETUP) + protocolid = TL_PROTOCOLID_SETUP; + + packet = alloc_ctrl_packet(sizeof(struct ipw_control_packet), + (channel_idx + 1), protocolid, line); + if (!packet) + return -ENOMEM; + packet->header.length = sizeof(struct ipw_control_packet_body); + packet->body.value = (state == 0 ? 0 : 1); + send_packet(hw, prio, &packet->header); + return 0; +} + + +static int set_DTR(struct ipw_hardware *hw, int priority, + unsigned int channel_idx, int state) +{ + if (state != 0) + hw->control_lines[channel_idx] |= IPW_CONTROL_LINE_DTR; + else + hw->control_lines[channel_idx] &= ~IPW_CONTROL_LINE_DTR; + + return set_control_line(hw, priority, channel_idx, COMCTRL_DTR, state); +} + +static int set_RTS(struct ipw_hardware *hw, int priority, + unsigned int channel_idx, int state) +{ + if (state != 0) + hw->control_lines[channel_idx] |= IPW_CONTROL_LINE_RTS; + else + hw->control_lines[channel_idx] &= ~IPW_CONTROL_LINE_RTS; + + return set_control_line(hw, priority, channel_idx, COMCTRL_RTS, state); +} + +int ipwireless_set_DTR(struct ipw_hardware *hw, unsigned int channel_idx, + int state) +{ + return set_DTR(hw, PRIO_CTRL, channel_idx, state); +} + +int ipwireless_set_RTS(struct ipw_hardware *hw, unsigned int channel_idx, + int state) +{ + return set_RTS(hw, PRIO_CTRL, channel_idx, state); +} + +struct ipw_setup_get_version_query_packet { + struct ipw_tx_packet header; + struct tl_setup_get_version_qry body; +}; + +struct ipw_setup_config_packet { + struct ipw_tx_packet header; + struct tl_setup_config_msg body; +}; + +struct ipw_setup_config_done_packet { + struct ipw_tx_packet header; + struct tl_setup_config_done_msg body; +}; + +struct ipw_setup_open_packet { + struct ipw_tx_packet header; + struct tl_setup_open_msg body; +}; + +struct ipw_setup_info_packet { + struct ipw_tx_packet header; + struct tl_setup_info_msg body; +}; + +struct ipw_setup_reboot_msg_ack { + struct ipw_tx_packet header; + struct TlSetupRebootMsgAck body; +}; + +/* This handles the actual initialization of the card */ +static void __handle_setup_get_version_rsp(struct ipw_hardware *hw) +{ + struct ipw_setup_config_packet *config_packet; + struct ipw_setup_config_done_packet *config_done_packet; + struct ipw_setup_open_packet *open_packet; + struct ipw_setup_info_packet *info_packet; + int port; + unsigned int channel_idx; + + /* generate config packet */ + for (port = 1; port <= NL_NUM_OF_ADDRESSES; port++) { + config_packet = alloc_ctrl_packet( + sizeof(struct ipw_setup_config_packet), + ADDR_SETUP_PROT, + TL_PROTOCOLID_SETUP, + TL_SETUP_SIGNO_CONFIG_MSG); + if (!config_packet) + goto exit_nomem; + config_packet->header.length = sizeof(struct tl_setup_config_msg); + config_packet->body.port_no = port; + config_packet->body.prio_data = PRIO_DATA; + config_packet->body.prio_ctrl = PRIO_CTRL; + send_packet(hw, PRIO_SETUP, &config_packet->header); + } + config_done_packet = alloc_ctrl_packet( + sizeof(struct ipw_setup_config_done_packet), + ADDR_SETUP_PROT, + TL_PROTOCOLID_SETUP, + TL_SETUP_SIGNO_CONFIG_DONE_MSG); + if (!config_done_packet) + goto exit_nomem; + config_done_packet->header.length = sizeof(struct tl_setup_config_done_msg); + send_packet(hw, PRIO_SETUP, &config_done_packet->header); + + /* generate open packet */ + for (port = 1; port <= NL_NUM_OF_ADDRESSES; port++) { + open_packet = alloc_ctrl_packet( + sizeof(struct ipw_setup_open_packet), + ADDR_SETUP_PROT, + TL_PROTOCOLID_SETUP, + TL_SETUP_SIGNO_OPEN_MSG); + if (!open_packet) + goto exit_nomem; + open_packet->header.length = sizeof(struct tl_setup_open_msg); + open_packet->body.port_no = port; + send_packet(hw, PRIO_SETUP, &open_packet->header); + } + for (channel_idx = 0; + channel_idx < NL_NUM_OF_ADDRESSES; channel_idx++) { + int ret; + + ret = set_DTR(hw, PRIO_SETUP, channel_idx, + (hw->control_lines[channel_idx] & + IPW_CONTROL_LINE_DTR) != 0); + if (ret) { + printk(KERN_ERR IPWIRELESS_PCCARD_NAME + ": error setting DTR (%d)\n", ret); + return; + } + + ret = set_RTS(hw, PRIO_SETUP, channel_idx, + (hw->control_lines [channel_idx] & + IPW_CONTROL_LINE_RTS) != 0); + if (ret) { + printk(KERN_ERR IPWIRELESS_PCCARD_NAME + ": error setting RTS (%d)\n", ret); + return; + } + } + /* + * For NDIS we assume that we are using sync PPP frames, for COM async. + * This driver uses NDIS mode too. We don't bother with translation + * from async -> sync PPP. + */ + info_packet = alloc_ctrl_packet(sizeof(struct ipw_setup_info_packet), + ADDR_SETUP_PROT, + TL_PROTOCOLID_SETUP, + TL_SETUP_SIGNO_INFO_MSG); + if (!info_packet) + goto exit_nomem; + info_packet->header.length = sizeof(struct tl_setup_info_msg); + info_packet->body.driver_type = NDISWAN_DRIVER; + info_packet->body.major_version = NDISWAN_DRIVER_MAJOR_VERSION; + info_packet->body.minor_version = NDISWAN_DRIVER_MINOR_VERSION; + send_packet(hw, PRIO_SETUP, &info_packet->header); + + /* Initialization is now complete, so we clear the 'to_setup' flag */ + hw->to_setup = 0; + + return; + +exit_nomem: + printk(KERN_ERR IPWIRELESS_PCCARD_NAME + ": not enough memory to alloc control packet\n"); + hw->to_setup = -1; +} + +static void handle_setup_get_version_rsp(struct ipw_hardware *hw, + unsigned char vers_no) +{ + del_timer(&hw->setup_timer); + hw->initializing = 0; + printk(KERN_INFO IPWIRELESS_PCCARD_NAME ": card is ready.\n"); + + if (vers_no == TL_SETUP_VERSION) + __handle_setup_get_version_rsp(hw); + else + printk(KERN_ERR IPWIRELESS_PCCARD_NAME + ": invalid hardware version no %u\n", + (unsigned int) vers_no); +} + +static void ipw_send_setup_packet(struct ipw_hardware *hw) +{ + struct ipw_setup_get_version_query_packet *ver_packet; + + ver_packet = alloc_ctrl_packet( + sizeof(struct ipw_setup_get_version_query_packet), + ADDR_SETUP_PROT, TL_PROTOCOLID_SETUP, + TL_SETUP_SIGNO_GET_VERSION_QRY); + if (!ver_packet) + return; + ver_packet->header.length = sizeof(struct tl_setup_get_version_qry); + + /* + * Response is handled in handle_received_SETUP_packet + */ + send_packet(hw, PRIO_SETUP, &ver_packet->header); +} + +static void handle_received_SETUP_packet(struct ipw_hardware *hw, + unsigned int address, + const unsigned char *data, int len, + int is_last) +{ + const union ipw_setup_rx_msg *rx_msg = (const union ipw_setup_rx_msg *) data; + + if (address != ADDR_SETUP_PROT) { + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": setup packet has bad address %d\n", address); + return; + } + + switch (rx_msg->sig_no) { + case TL_SETUP_SIGNO_GET_VERSION_RSP: + if (hw->to_setup) + handle_setup_get_version_rsp(hw, + rx_msg->version_rsp_msg.version); + break; + + case TL_SETUP_SIGNO_OPEN_MSG: + if (ipwireless_debug) { + unsigned int channel_idx = rx_msg->open_msg.port_no - 1; + + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": OPEN_MSG [channel %u] reply received\n", + channel_idx); + } + break; + + case TL_SETUP_SIGNO_INFO_MSG_ACK: + if (ipwireless_debug) + printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME + ": card successfully configured as NDISWAN\n"); + break; + + case TL_SETUP_SIGNO_REBOOT_MSG: + if (hw->to_setup) + printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME + ": Setup not completed - ignoring reboot msg\n"); + else { + struct ipw_setup_reboot_msg_ack *packet; + + printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME + ": Acknowledging REBOOT message\n"); + packet = alloc_ctrl_packet( + sizeof(struct ipw_setup_reboot_msg_ack), + ADDR_SETUP_PROT, TL_PROTOCOLID_SETUP, + TL_SETUP_SIGNO_REBOOT_MSG_ACK); + if (!packet) { + pr_err(IPWIRELESS_PCCARD_NAME + ": Not enough memory to send reboot packet"); + break; + } + packet->header.length = + sizeof(struct TlSetupRebootMsgAck); + send_packet(hw, PRIO_SETUP, &packet->header); + if (hw->reboot_callback) + hw->reboot_callback(hw->reboot_callback_data); + } + break; + + default: + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": unknown setup message %u received\n", + (unsigned int) rx_msg->sig_no); + } +} + +static void do_close_hardware(struct ipw_hardware *hw) +{ + unsigned int irqn; + + if (hw->hw_version == HW_VERSION_1) { + /* Disable TX and RX interrupts. */ + outw(0, hw->base_port + IOIER); + + /* Acknowledge any outstanding interrupt requests */ + irqn = inw(hw->base_port + IOIR); + if (irqn & IR_TXINTR) + outw(IR_TXINTR, hw->base_port + IOIR); + if (irqn & IR_RXINTR) + outw(IR_RXINTR, hw->base_port + IOIR); + + synchronize_irq(hw->irq); + } +} + +struct ipw_hardware *ipwireless_hardware_create(void) +{ + int i; + struct ipw_hardware *hw = + kzalloc(sizeof(struct ipw_hardware), GFP_KERNEL); + + if (!hw) + return NULL; + + hw->irq = -1; + hw->initializing = 1; + hw->tx_ready = 1; + hw->rx_bytes_queued = 0; + hw->rx_pool_size = 0; + hw->last_memtx_serial = (unsigned short) 0xffff; + for (i = 0; i < NL_NUM_OF_PRIORITIES; i++) + INIT_LIST_HEAD(&hw->tx_queue[i]); + + INIT_LIST_HEAD(&hw->rx_queue); + INIT_LIST_HEAD(&hw->rx_pool); + spin_lock_init(&hw->lock); + tasklet_setup(&hw->tasklet, ipwireless_do_tasklet); + INIT_WORK(&hw->work_rx, ipw_receive_data_work); + timer_setup(&hw->setup_timer, ipwireless_setup_timer, 0); + + return hw; +} + +void ipwireless_init_hardware_v1(struct ipw_hardware *hw, + unsigned int base_port, + void __iomem *attr_memory, + void __iomem *common_memory, + int is_v2_card, + void (*reboot_callback) (void *data), + void *reboot_callback_data) +{ + if (hw->removed) { + hw->removed = 0; + enable_irq(hw->irq); + } + hw->base_port = base_port; + hw->hw_version = (is_v2_card ? HW_VERSION_2 : HW_VERSION_1); + hw->ll_mtu = (hw->hw_version == HW_VERSION_1 ? LL_MTU_V1 : LL_MTU_V2); + hw->memregs_CCR = (struct MEMCCR __iomem *) + ((unsigned short __iomem *) attr_memory + 0x200); + hw->memory_info_regs = (struct MEMINFREG __iomem *) common_memory; + hw->memreg_tx = &hw->memory_info_regs->memreg_tx_new; + hw->reboot_callback = reboot_callback; + hw->reboot_callback_data = reboot_callback_data; +} + +void ipwireless_init_hardware_v2_v3(struct ipw_hardware *hw) +{ + hw->initializing = 1; + hw->init_loops = 0; + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": waiting for card to start up...\n"); + ipwireless_setup_timer(&hw->setup_timer); +} + +static void ipwireless_setup_timer(struct timer_list *t) +{ + struct ipw_hardware *hw = from_timer(hw, t, setup_timer); + + hw->init_loops++; + + if (hw->init_loops == TL_SETUP_MAX_VERSION_QRY && + hw->hw_version == HW_VERSION_2 && + hw->memreg_tx == &hw->memory_info_regs->memreg_tx_new) { + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": failed to startup using TX2, trying TX\n"); + + hw->memreg_tx = &hw->memory_info_regs->memreg_tx_old; + hw->init_loops = 0; + } + /* Give up after a certain number of retries */ + if (hw->init_loops == TL_SETUP_MAX_VERSION_QRY) { + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": card failed to start up!\n"); + hw->initializing = 0; + } else { + /* Do not attempt to write to the board if it is not present. */ + if (is_card_present(hw)) { + unsigned long flags; + + spin_lock_irqsave(&hw->lock, flags); + hw->to_setup = 1; + hw->tx_ready = 1; + spin_unlock_irqrestore(&hw->lock, flags); + tasklet_schedule(&hw->tasklet); + } + + mod_timer(&hw->setup_timer, + jiffies + msecs_to_jiffies(TL_SETUP_VERSION_QRY_TMO)); + } +} + +/* + * Stop any interrupts from executing so that, once this function returns, + * other layers of the driver can be sure they won't get any more callbacks. + * Thus must be called on a proper process context. + */ +void ipwireless_stop_interrupts(struct ipw_hardware *hw) +{ + if (!hw->shutting_down) { + /* Tell everyone we are going down. */ + hw->shutting_down = 1; + del_timer(&hw->setup_timer); + + /* Prevent the hardware from sending any more interrupts */ + do_close_hardware(hw); + } +} + +void ipwireless_hardware_free(struct ipw_hardware *hw) +{ + int i; + struct ipw_rx_packet *rp, *rq; + struct ipw_tx_packet *tp, *tq; + + ipwireless_stop_interrupts(hw); + + flush_work(&hw->work_rx); + + for (i = 0; i < NL_NUM_OF_ADDRESSES; i++) + kfree(hw->packet_assembler[i]); + + for (i = 0; i < NL_NUM_OF_PRIORITIES; i++) + list_for_each_entry_safe(tp, tq, &hw->tx_queue[i], queue) { + list_del(&tp->queue); + kfree(tp); + } + + list_for_each_entry_safe(rp, rq, &hw->rx_queue, queue) { + list_del(&rp->queue); + kfree(rp); + } + + list_for_each_entry_safe(rp, rq, &hw->rx_pool, queue) { + list_del(&rp->queue); + kfree(rp); + } + kfree(hw); +} + +/* + * Associate the specified network with this hardware, so it will receive events + * from it. + */ +void ipwireless_associate_network(struct ipw_hardware *hw, + struct ipw_network *network) +{ + hw->network = network; +} diff --git a/drivers/tty/ipwireless/hardware.h b/drivers/tty/ipwireless/hardware.h new file mode 100644 index 000000000..e524a8fcc --- /dev/null +++ b/drivers/tty/ipwireless/hardware.h @@ -0,0 +1,63 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * IPWireless 3G PCMCIA Network Driver + * + * Original code + * by Stephen Blackheath , + * Ben Martel + * + * Copyrighted as follows: + * Copyright (C) 2004 by Symmetric Systems Ltd (NZ) + * + * Various driver changes and rewrites, port to new kernels + * Copyright (C) 2006-2007 Jiri Kosina + * + * Misc code cleanups and updates + * Copyright (C) 2007 David Sterba + */ + +#ifndef _IPWIRELESS_CS_HARDWARE_H_ +#define _IPWIRELESS_CS_HARDWARE_H_ + +#include +#include +#include + +#define IPW_CONTROL_LINE_CTS 0x0001 +#define IPW_CONTROL_LINE_DCD 0x0002 +#define IPW_CONTROL_LINE_DSR 0x0004 +#define IPW_CONTROL_LINE_RI 0x0008 +#define IPW_CONTROL_LINE_DTR 0x0010 +#define IPW_CONTROL_LINE_RTS 0x0020 + +struct ipw_hardware; +struct ipw_network; + +struct ipw_hardware *ipwireless_hardware_create(void); +void ipwireless_hardware_free(struct ipw_hardware *hw); +irqreturn_t ipwireless_interrupt(int irq, void *dev_id); +int ipwireless_set_DTR(struct ipw_hardware *hw, unsigned int channel_idx, + int state); +int ipwireless_set_RTS(struct ipw_hardware *hw, unsigned int channel_idx, + int state); +int ipwireless_send_packet(struct ipw_hardware *hw, + unsigned int channel_idx, + const unsigned char *data, + unsigned int length, + void (*packet_sent_callback) (void *cb, + unsigned int length), + void *sent_cb_data); +void ipwireless_associate_network(struct ipw_hardware *hw, + struct ipw_network *net); +void ipwireless_stop_interrupts(struct ipw_hardware *hw); +void ipwireless_init_hardware_v1(struct ipw_hardware *hw, + unsigned int base_port, + void __iomem *attr_memory, + void __iomem *common_memory, + int is_v2_card, + void (*reboot_cb) (void *data), + void *reboot_cb_data); +void ipwireless_init_hardware_v2_v3(struct ipw_hardware *hw); +void ipwireless_sleep(unsigned int tenths); + +#endif diff --git a/drivers/tty/ipwireless/main.c b/drivers/tty/ipwireless/main.c new file mode 100644 index 000000000..4c18bbfe1 --- /dev/null +++ b/drivers/tty/ipwireless/main.c @@ -0,0 +1,356 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * IPWireless 3G PCMCIA Network Driver + * + * Original code + * by Stephen Blackheath , + * Ben Martel + * + * Copyrighted as follows: + * Copyright (C) 2004 by Symmetric Systems Ltd (NZ) + * + * Various driver changes and rewrites, port to new kernels + * Copyright (C) 2006-2007 Jiri Kosina + * + * Misc code cleanups and updates + * Copyright (C) 2007 David Sterba + */ + +#include "hardware.h" +#include "network.h" +#include "main.h" +#include "tty.h" + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +static const struct pcmcia_device_id ipw_ids[] = { + PCMCIA_DEVICE_MANF_CARD(0x02f2, 0x0100), + PCMCIA_DEVICE_MANF_CARD(0x02f2, 0x0200), + PCMCIA_DEVICE_NULL +}; +MODULE_DEVICE_TABLE(pcmcia, ipw_ids); + +static void ipwireless_detach(struct pcmcia_device *link); + +/* + * Module params + */ +/* Debug mode: more verbose, print sent/recv bytes */ +int ipwireless_debug; +int ipwireless_loopback; +int ipwireless_out_queue = 10; + +module_param_named(debug, ipwireless_debug, int, 0); +module_param_named(loopback, ipwireless_loopback, int, 0); +module_param_named(out_queue, ipwireless_out_queue, int, 0); +MODULE_PARM_DESC(debug, "switch on debug messages [0]"); +MODULE_PARM_DESC(loopback, + "debug: enable ras_raw channel [0]"); +MODULE_PARM_DESC(out_queue, "debug: set size of outgoing PPP queue [10]"); + +/* Executes in process context. */ +static void signalled_reboot_work(struct work_struct *work_reboot) +{ + struct ipw_dev *ipw = container_of(work_reboot, struct ipw_dev, + work_reboot); + struct pcmcia_device *link = ipw->link; + pcmcia_reset_card(link->socket); +} + +static void signalled_reboot_callback(void *callback_data) +{ + struct ipw_dev *ipw = (struct ipw_dev *) callback_data; + + /* Delegate to process context. */ + schedule_work(&ipw->work_reboot); +} + +static int ipwireless_probe(struct pcmcia_device *p_dev, void *priv_data) +{ + struct ipw_dev *ipw = priv_data; + int ret; + + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + + /* 0x40 causes it to generate level mode interrupts. */ + /* 0x04 enables IREQ pin. */ + p_dev->config_index |= 0x44; + p_dev->io_lines = 16; + ret = pcmcia_request_io(p_dev); + if (ret) + return ret; + + if (!request_region(p_dev->resource[0]->start, + resource_size(p_dev->resource[0]), + IPWIRELESS_PCCARD_NAME)) { + ret = -EBUSY; + goto exit; + } + + p_dev->resource[2]->flags |= + WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM | WIN_ENABLE; + + ret = pcmcia_request_window(p_dev, p_dev->resource[2], 0); + if (ret != 0) + goto exit1; + + ret = pcmcia_map_mem_page(p_dev, p_dev->resource[2], p_dev->card_addr); + if (ret != 0) + goto exit1; + + ipw->is_v2_card = resource_size(p_dev->resource[2]) == 0x100; + + ipw->common_memory = ioremap(p_dev->resource[2]->start, + resource_size(p_dev->resource[2])); + if (!ipw->common_memory) { + ret = -ENOMEM; + goto exit1; + } + if (!request_mem_region(p_dev->resource[2]->start, + resource_size(p_dev->resource[2]), + IPWIRELESS_PCCARD_NAME)) { + ret = -EBUSY; + goto exit2; + } + + p_dev->resource[3]->flags |= WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_AM | + WIN_ENABLE; + p_dev->resource[3]->end = 0; /* this used to be 0x1000 */ + ret = pcmcia_request_window(p_dev, p_dev->resource[3], 0); + if (ret != 0) + goto exit3; + + ret = pcmcia_map_mem_page(p_dev, p_dev->resource[3], 0); + if (ret != 0) + goto exit3; + + ipw->attr_memory = ioremap(p_dev->resource[3]->start, + resource_size(p_dev->resource[3])); + if (!ipw->attr_memory) { + ret = -ENOMEM; + goto exit3; + } + if (!request_mem_region(p_dev->resource[3]->start, + resource_size(p_dev->resource[3]), + IPWIRELESS_PCCARD_NAME)) { + ret = -EBUSY; + goto exit4; + } + + return 0; + +exit4: + iounmap(ipw->attr_memory); +exit3: + release_mem_region(p_dev->resource[2]->start, + resource_size(p_dev->resource[2])); +exit2: + iounmap(ipw->common_memory); +exit1: + release_region(p_dev->resource[0]->start, + resource_size(p_dev->resource[0])); +exit: + pcmcia_disable_device(p_dev); + return ret; +} + +static int config_ipwireless(struct ipw_dev *ipw) +{ + struct pcmcia_device *link = ipw->link; + int ret = 0; + + ipw->is_v2_card = 0; + link->config_flags |= CONF_AUTO_SET_IO | CONF_AUTO_SET_IOMEM | + CONF_ENABLE_IRQ; + + ret = pcmcia_loop_config(link, ipwireless_probe, ipw); + if (ret != 0) + return ret; + + INIT_WORK(&ipw->work_reboot, signalled_reboot_work); + + ipwireless_init_hardware_v1(ipw->hardware, link->resource[0]->start, + ipw->attr_memory, ipw->common_memory, + ipw->is_v2_card, signalled_reboot_callback, + ipw); + + ret = pcmcia_request_irq(link, ipwireless_interrupt); + if (ret != 0) + goto exit; + + printk(KERN_INFO IPWIRELESS_PCCARD_NAME ": Card type %s\n", + ipw->is_v2_card ? "V2/V3" : "V1"); + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": I/O ports %pR, irq %d\n", link->resource[0], + (unsigned int) link->irq); + if (ipw->attr_memory && ipw->common_memory) + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": attr memory %pR, common memory %pR\n", + link->resource[3], + link->resource[2]); + + ipw->network = ipwireless_network_create(ipw->hardware); + if (!ipw->network) + goto exit; + + ipw->tty = ipwireless_tty_create(ipw->hardware, ipw->network); + if (!ipw->tty) + goto exit; + + ipwireless_init_hardware_v2_v3(ipw->hardware); + + /* + * Do the RequestConfiguration last, because it enables interrupts. + * Then we don't get any interrupts before we're ready for them. + */ + ret = pcmcia_enable_device(link); + if (ret != 0) + goto exit; + + return 0; + +exit: + if (ipw->common_memory) { + release_mem_region(link->resource[2]->start, + resource_size(link->resource[2])); + iounmap(ipw->common_memory); + } + if (ipw->attr_memory) { + release_mem_region(link->resource[3]->start, + resource_size(link->resource[3])); + iounmap(ipw->attr_memory); + } + pcmcia_disable_device(link); + return -1; +} + +static void release_ipwireless(struct ipw_dev *ipw) +{ + release_region(ipw->link->resource[0]->start, + resource_size(ipw->link->resource[0])); + if (ipw->common_memory) { + release_mem_region(ipw->link->resource[2]->start, + resource_size(ipw->link->resource[2])); + iounmap(ipw->common_memory); + } + if (ipw->attr_memory) { + release_mem_region(ipw->link->resource[3]->start, + resource_size(ipw->link->resource[3])); + iounmap(ipw->attr_memory); + } + pcmcia_disable_device(ipw->link); +} + +/* + * ipwireless_attach() creates an "instance" of the driver, allocating + * local data structures for one device (one interface). The device + * is registered with Card Services. + * + * The pcmcia_device structure is initialized, but we don't actually + * configure the card at this point -- we wait until we receive a + * card insertion event. + */ +static int ipwireless_attach(struct pcmcia_device *link) +{ + struct ipw_dev *ipw; + int ret; + + ipw = kzalloc(sizeof(struct ipw_dev), GFP_KERNEL); + if (!ipw) + return -ENOMEM; + + ipw->link = link; + link->priv = ipw; + + ipw->hardware = ipwireless_hardware_create(); + if (!ipw->hardware) { + kfree(ipw); + return -ENOMEM; + } + /* RegisterClient will call config_ipwireless */ + + ret = config_ipwireless(ipw); + + if (ret != 0) { + ipwireless_detach(link); + return ret; + } + + return 0; +} + +/* + * This deletes a driver "instance". The device is de-registered with + * Card Services. If it has been released, all local data structures + * are freed. Otherwise, the structures will be freed when the device + * is released. + */ +static void ipwireless_detach(struct pcmcia_device *link) +{ + struct ipw_dev *ipw = link->priv; + + release_ipwireless(ipw); + + if (ipw->tty != NULL) + ipwireless_tty_free(ipw->tty); + if (ipw->network != NULL) + ipwireless_network_free(ipw->network); + if (ipw->hardware != NULL) + ipwireless_hardware_free(ipw->hardware); + kfree(ipw); +} + +static struct pcmcia_driver me = { + .owner = THIS_MODULE, + .probe = ipwireless_attach, + .remove = ipwireless_detach, + .name = IPWIRELESS_PCCARD_NAME, + .id_table = ipw_ids +}; + +/* + * Module insertion : initialisation of the module. + * Register the card with cardmgr... + */ +static int __init init_ipwireless(void) +{ + int ret; + + ret = ipwireless_tty_init(); + if (ret != 0) + return ret; + + ret = pcmcia_register_driver(&me); + if (ret != 0) + ipwireless_tty_release(); + + return ret; +} + +/* + * Module removal + */ +static void __exit exit_ipwireless(void) +{ + pcmcia_unregister_driver(&me); + ipwireless_tty_release(); +} + +module_init(init_ipwireless); +module_exit(exit_ipwireless); + +MODULE_AUTHOR(IPWIRELESS_PCMCIA_AUTHOR); +MODULE_DESCRIPTION(IPWIRELESS_PCCARD_NAME " " IPWIRELESS_PCMCIA_VERSION); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/ipwireless/main.h b/drivers/tty/ipwireless/main.h new file mode 100644 index 000000000..73818bb64 --- /dev/null +++ b/drivers/tty/ipwireless/main.h @@ -0,0 +1,69 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * IPWireless 3G PCMCIA Network Driver + * + * Original code + * by Stephen Blackheath , + * Ben Martel + * + * Copyrighted as follows: + * Copyright (C) 2004 by Symmetric Systems Ltd (NZ) + * + * Various driver changes and rewrites, port to new kernels + * Copyright (C) 2006-2007 Jiri Kosina + * + * Misc code cleanups and updates + * Copyright (C) 2007 David Sterba + */ + +#ifndef _IPWIRELESS_CS_H_ +#define _IPWIRELESS_CS_H_ + +#include +#include + +#include +#include + +#include "hardware.h" + +#define IPWIRELESS_PCCARD_NAME "ipwireless" +#define IPWIRELESS_PCMCIA_VERSION "1.1" +#define IPWIRELESS_PCMCIA_AUTHOR \ + "Stephen Blackheath, Ben Martel, Jiri Kosina and David Sterba" + +#define IPWIRELESS_TX_QUEUE_SIZE 262144 +#define IPWIRELESS_RX_QUEUE_SIZE 262144 + +#define IPWIRELESS_STATE_DEBUG + +struct ipw_hardware; +struct ipw_network; +struct ipw_tty; + +struct ipw_dev { + struct pcmcia_device *link; + int is_v2_card; + + void __iomem *attr_memory; + + void __iomem *common_memory; + + /* Reference to attribute memory, containing CIS data */ + void *attribute_memory; + + /* Hardware context */ + struct ipw_hardware *hardware; + /* Network layer context */ + struct ipw_network *network; + /* TTY device context */ + struct ipw_tty *tty; + struct work_struct work_reboot; +}; + +/* Module parametres */ +extern int ipwireless_debug; +extern int ipwireless_loopback; +extern int ipwireless_out_queue; + +#endif diff --git a/drivers/tty/ipwireless/network.c b/drivers/tty/ipwireless/network.c new file mode 100644 index 000000000..fe569f629 --- /dev/null +++ b/drivers/tty/ipwireless/network.c @@ -0,0 +1,517 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * IPWireless 3G PCMCIA Network Driver + * + * Original code + * by Stephen Blackheath , + * Ben Martel + * + * Copyrighted as follows: + * Copyright (C) 2004 by Symmetric Systems Ltd (NZ) + * + * Various driver changes and rewrites, port to new kernels + * Copyright (C) 2006-2007 Jiri Kosina + * + * Misc code cleanups and updates + * Copyright (C) 2007 David Sterba + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "network.h" +#include "hardware.h" +#include "main.h" +#include "tty.h" + +#define MAX_ASSOCIATED_TTYS 2 + +#define SC_RCV_BITS (SC_RCV_B7_1|SC_RCV_B7_0|SC_RCV_ODDP|SC_RCV_EVNP) + +struct ipw_network { + /* Hardware context, used for calls to hardware layer. */ + struct ipw_hardware *hardware; + /* Context for kernel 'generic_ppp' functionality */ + struct ppp_channel *ppp_channel; + /* tty context connected with IPW console */ + struct ipw_tty *associated_ttys[NO_OF_IPW_CHANNELS][MAX_ASSOCIATED_TTYS]; + /* True if ppp needs waking up once we're ready to xmit */ + int ppp_blocked; + /* Number of packets queued up in hardware module. */ + int outgoing_packets_queued; + /* Spinlock to avoid interrupts during shutdown */ + spinlock_t lock; + struct mutex close_lock; + + /* PPP ioctl data, not actually used anywere */ + unsigned int flags; + unsigned int rbits; + u32 xaccm[8]; + u32 raccm; + int mru; + + int shutting_down; + unsigned int ras_control_lines; + + struct work_struct work_go_online; + struct work_struct work_go_offline; +}; + +static void notify_packet_sent(void *callback_data, unsigned int packet_length) +{ + struct ipw_network *network = callback_data; + unsigned long flags; + + spin_lock_irqsave(&network->lock, flags); + network->outgoing_packets_queued--; + if (network->ppp_channel != NULL) { + if (network->ppp_blocked) { + network->ppp_blocked = 0; + spin_unlock_irqrestore(&network->lock, flags); + ppp_output_wakeup(network->ppp_channel); + if (ipwireless_debug) + printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME + ": ppp unblocked\n"); + } else + spin_unlock_irqrestore(&network->lock, flags); + } else + spin_unlock_irqrestore(&network->lock, flags); +} + +/* + * Called by the ppp system when it has a packet to send to the hardware. + */ +static int ipwireless_ppp_start_xmit(struct ppp_channel *ppp_channel, + struct sk_buff *skb) +{ + struct ipw_network *network = ppp_channel->private; + unsigned long flags; + + spin_lock_irqsave(&network->lock, flags); + if (network->outgoing_packets_queued < ipwireless_out_queue) { + unsigned char *buf; + static unsigned char header[] = { + PPP_ALLSTATIONS, /* 0xff */ + PPP_UI, /* 0x03 */ + }; + int ret; + + network->outgoing_packets_queued++; + spin_unlock_irqrestore(&network->lock, flags); + + /* + * If we have the requested amount of headroom in the skb we + * were handed, then we can add the header efficiently. + */ + if (skb_headroom(skb) >= 2) { + memcpy(skb_push(skb, 2), header, 2); + ret = ipwireless_send_packet(network->hardware, + IPW_CHANNEL_RAS, skb->data, + skb->len, + notify_packet_sent, + network); + if (ret < 0) { + skb_pull(skb, 2); + return 0; + } + } else { + /* Otherwise (rarely) we do it inefficiently. */ + buf = kmalloc(skb->len + 2, GFP_ATOMIC); + if (!buf) + return 0; + memcpy(buf + 2, skb->data, skb->len); + memcpy(buf, header, 2); + ret = ipwireless_send_packet(network->hardware, + IPW_CHANNEL_RAS, buf, + skb->len + 2, + notify_packet_sent, + network); + kfree(buf); + if (ret < 0) + return 0; + } + kfree_skb(skb); + return 1; + } else { + /* + * Otherwise reject the packet, and flag that the ppp system + * needs to be unblocked once we are ready to send. + */ + network->ppp_blocked = 1; + spin_unlock_irqrestore(&network->lock, flags); + if (ipwireless_debug) + printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME ": ppp blocked\n"); + return 0; + } +} + +/* Handle an ioctl call that has come in via ppp. (copy of ppp_async_ioctl() */ +static int ipwireless_ppp_ioctl(struct ppp_channel *ppp_channel, + unsigned int cmd, unsigned long arg) +{ + struct ipw_network *network = ppp_channel->private; + int err, val; + u32 accm[8]; + int __user *user_arg = (int __user *) arg; + + err = -EFAULT; + switch (cmd) { + case PPPIOCGFLAGS: + val = network->flags | network->rbits; + if (put_user(val, user_arg)) + break; + err = 0; + break; + + case PPPIOCSFLAGS: + if (get_user(val, user_arg)) + break; + network->flags = val & ~SC_RCV_BITS; + network->rbits = val & SC_RCV_BITS; + err = 0; + break; + + case PPPIOCGASYNCMAP: + if (put_user(network->xaccm[0], user_arg)) + break; + err = 0; + break; + + case PPPIOCSASYNCMAP: + if (get_user(network->xaccm[0], user_arg)) + break; + err = 0; + break; + + case PPPIOCGRASYNCMAP: + if (put_user(network->raccm, user_arg)) + break; + err = 0; + break; + + case PPPIOCSRASYNCMAP: + if (get_user(network->raccm, user_arg)) + break; + err = 0; + break; + + case PPPIOCGXASYNCMAP: + if (copy_to_user((void __user *) arg, network->xaccm, + sizeof(network->xaccm))) + break; + err = 0; + break; + + case PPPIOCSXASYNCMAP: + if (copy_from_user(accm, (void __user *) arg, sizeof(accm))) + break; + accm[2] &= ~0x40000000U; /* can't escape 0x5e */ + accm[3] |= 0x60000000U; /* must escape 0x7d, 0x7e */ + memcpy(network->xaccm, accm, sizeof(network->xaccm)); + err = 0; + break; + + case PPPIOCGMRU: + if (put_user(network->mru, user_arg)) + break; + err = 0; + break; + + case PPPIOCSMRU: + if (get_user(val, user_arg)) + break; + if (val < PPP_MRU) + val = PPP_MRU; + network->mru = val; + err = 0; + break; + + default: + err = -ENOTTY; + } + + return err; +} + +static const struct ppp_channel_ops ipwireless_ppp_channel_ops = { + .start_xmit = ipwireless_ppp_start_xmit, + .ioctl = ipwireless_ppp_ioctl +}; + +static void do_go_online(struct work_struct *work_go_online) +{ + struct ipw_network *network = + container_of(work_go_online, struct ipw_network, + work_go_online); + unsigned long flags; + + spin_lock_irqsave(&network->lock, flags); + if (!network->ppp_channel) { + struct ppp_channel *channel; + + spin_unlock_irqrestore(&network->lock, flags); + channel = kzalloc(sizeof(struct ppp_channel), GFP_KERNEL); + if (!channel) { + printk(KERN_ERR IPWIRELESS_PCCARD_NAME + ": unable to allocate PPP channel\n"); + return; + } + channel->private = network; + channel->mtu = 16384; /* Wild guess */ + channel->hdrlen = 2; + channel->ops = &ipwireless_ppp_channel_ops; + + network->flags = 0; + network->rbits = 0; + network->mru = PPP_MRU; + memset(network->xaccm, 0, sizeof(network->xaccm)); + network->xaccm[0] = ~0U; + network->xaccm[3] = 0x60000000U; + network->raccm = ~0U; + if (ppp_register_channel(channel) < 0) { + printk(KERN_ERR IPWIRELESS_PCCARD_NAME + ": unable to register PPP channel\n"); + kfree(channel); + return; + } + spin_lock_irqsave(&network->lock, flags); + network->ppp_channel = channel; + } + spin_unlock_irqrestore(&network->lock, flags); +} + +static void do_go_offline(struct work_struct *work_go_offline) +{ + struct ipw_network *network = + container_of(work_go_offline, struct ipw_network, + work_go_offline); + unsigned long flags; + + mutex_lock(&network->close_lock); + spin_lock_irqsave(&network->lock, flags); + if (network->ppp_channel != NULL) { + struct ppp_channel *channel = network->ppp_channel; + + network->ppp_channel = NULL; + spin_unlock_irqrestore(&network->lock, flags); + mutex_unlock(&network->close_lock); + ppp_unregister_channel(channel); + } else { + spin_unlock_irqrestore(&network->lock, flags); + mutex_unlock(&network->close_lock); + } +} + +void ipwireless_network_notify_control_line_change(struct ipw_network *network, + unsigned int channel_idx, + unsigned int control_lines, + unsigned int changed_mask) +{ + int i; + + if (channel_idx == IPW_CHANNEL_RAS) + network->ras_control_lines = control_lines; + + for (i = 0; i < MAX_ASSOCIATED_TTYS; i++) { + struct ipw_tty *tty = + network->associated_ttys[channel_idx][i]; + + /* + * If it's associated with a tty (other than the RAS channel + * when we're online), then send the data to that tty. The RAS + * channel's data is handled above - it always goes through + * ppp_generic. + */ + if (tty) + ipwireless_tty_notify_control_line_change(tty, + channel_idx, + control_lines, + changed_mask); + } +} + +/* + * Some versions of firmware stuff packets with 0xff 0x03 (PPP: ALLSTATIONS, UI) + * bytes, which are required on sent packet, but not always present on received + * packets + */ +static struct sk_buff *ipw_packet_received_skb(unsigned char *data, + unsigned int length) +{ + struct sk_buff *skb; + + if (length > 2 && data[0] == PPP_ALLSTATIONS && data[1] == PPP_UI) { + length -= 2; + data += 2; + } + + skb = dev_alloc_skb(length + 4); + if (skb == NULL) + return NULL; + skb_reserve(skb, 2); + skb_put_data(skb, data, length); + + return skb; +} + +void ipwireless_network_packet_received(struct ipw_network *network, + unsigned int channel_idx, + unsigned char *data, + unsigned int length) +{ + int i; + unsigned long flags; + + for (i = 0; i < MAX_ASSOCIATED_TTYS; i++) { + struct ipw_tty *tty = network->associated_ttys[channel_idx][i]; + + if (!tty) + continue; + + /* + * If it's associated with a tty (other than the RAS channel + * when we're online), then send the data to that tty. The RAS + * channel's data is handled above - it always goes through + * ppp_generic. + */ + if (channel_idx == IPW_CHANNEL_RAS + && (network->ras_control_lines & + IPW_CONTROL_LINE_DCD) != 0 + && ipwireless_tty_is_modem(tty)) { + /* + * If data came in on the RAS channel and this tty is + * the modem tty, and we are online, then we send it to + * the PPP layer. + */ + mutex_lock(&network->close_lock); + spin_lock_irqsave(&network->lock, flags); + if (network->ppp_channel != NULL) { + struct sk_buff *skb; + + spin_unlock_irqrestore(&network->lock, + flags); + + /* Send the data to the ppp_generic module. */ + skb = ipw_packet_received_skb(data, length); + if (skb) + ppp_input(network->ppp_channel, skb); + } else + spin_unlock_irqrestore(&network->lock, + flags); + mutex_unlock(&network->close_lock); + } + /* Otherwise we send it out the tty. */ + else + ipwireless_tty_received(tty, data, length); + } +} + +struct ipw_network *ipwireless_network_create(struct ipw_hardware *hw) +{ + struct ipw_network *network = + kzalloc(sizeof(struct ipw_network), GFP_KERNEL); + + if (!network) + return NULL; + + spin_lock_init(&network->lock); + mutex_init(&network->close_lock); + + network->hardware = hw; + + INIT_WORK(&network->work_go_online, do_go_online); + INIT_WORK(&network->work_go_offline, do_go_offline); + + ipwireless_associate_network(hw, network); + + return network; +} + +void ipwireless_network_free(struct ipw_network *network) +{ + network->shutting_down = 1; + + ipwireless_ppp_close(network); + flush_work(&network->work_go_online); + flush_work(&network->work_go_offline); + + ipwireless_stop_interrupts(network->hardware); + ipwireless_associate_network(network->hardware, NULL); + + kfree(network); +} + +void ipwireless_associate_network_tty(struct ipw_network *network, + unsigned int channel_idx, + struct ipw_tty *tty) +{ + int i; + + for (i = 0; i < MAX_ASSOCIATED_TTYS; i++) + if (network->associated_ttys[channel_idx][i] == NULL) { + network->associated_ttys[channel_idx][i] = tty; + break; + } +} + +void ipwireless_disassociate_network_ttys(struct ipw_network *network, + unsigned int channel_idx) +{ + int i; + + for (i = 0; i < MAX_ASSOCIATED_TTYS; i++) + network->associated_ttys[channel_idx][i] = NULL; +} + +void ipwireless_ppp_open(struct ipw_network *network) +{ + if (ipwireless_debug) + printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME ": online\n"); + schedule_work(&network->work_go_online); +} + +void ipwireless_ppp_close(struct ipw_network *network) +{ + /* Disconnect from the wireless network. */ + if (ipwireless_debug) + printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME ": offline\n"); + schedule_work(&network->work_go_offline); +} + +int ipwireless_ppp_channel_index(struct ipw_network *network) +{ + int ret = -1; + unsigned long flags; + + spin_lock_irqsave(&network->lock, flags); + if (network->ppp_channel != NULL) + ret = ppp_channel_index(network->ppp_channel); + spin_unlock_irqrestore(&network->lock, flags); + + return ret; +} + +int ipwireless_ppp_unit_number(struct ipw_network *network) +{ + int ret = -1; + unsigned long flags; + + spin_lock_irqsave(&network->lock, flags); + if (network->ppp_channel != NULL) + ret = ppp_unit_number(network->ppp_channel); + spin_unlock_irqrestore(&network->lock, flags); + + return ret; +} + +int ipwireless_ppp_mru(const struct ipw_network *network) +{ + return network->mru; +} diff --git a/drivers/tty/ipwireless/network.h b/drivers/tty/ipwireless/network.h new file mode 100644 index 000000000..784932a59 --- /dev/null +++ b/drivers/tty/ipwireless/network.h @@ -0,0 +1,54 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * IPWireless 3G PCMCIA Network Driver + * + * Original code + * by Stephen Blackheath , + * Ben Martel + * + * Copyrighted as follows: + * Copyright (C) 2004 by Symmetric Systems Ltd (NZ) + * + * Various driver changes and rewrites, port to new kernels + * Copyright (C) 2006-2007 Jiri Kosina + * + * Misc code cleanups and updates + * Copyright (C) 2007 David Sterba + */ + +#ifndef _IPWIRELESS_CS_NETWORK_H_ +#define _IPWIRELESS_CS_NETWORK_H_ + +#include + +struct ipw_network; +struct ipw_tty; +struct ipw_hardware; + +/* Definitions of the different channels on the PCMCIA UE */ +#define IPW_CHANNEL_RAS 0 +#define IPW_CHANNEL_DIALLER 1 +#define IPW_CHANNEL_CONSOLE 2 +#define NO_OF_IPW_CHANNELS 5 + +void ipwireless_network_notify_control_line_change(struct ipw_network *net, + unsigned int channel_idx, unsigned int control_lines, + unsigned int control_mask); +void ipwireless_network_packet_received(struct ipw_network *net, + unsigned int channel_idx, unsigned char *data, + unsigned int length); +struct ipw_network *ipwireless_network_create(struct ipw_hardware *hw); +void ipwireless_network_free(struct ipw_network *net); +void ipwireless_associate_network_tty(struct ipw_network *net, + unsigned int channel_idx, struct ipw_tty *tty); +void ipwireless_disassociate_network_ttys(struct ipw_network *net, + unsigned int channel_idx); + +void ipwireless_ppp_open(struct ipw_network *net); + +void ipwireless_ppp_close(struct ipw_network *net); +int ipwireless_ppp_channel_index(struct ipw_network *net); +int ipwireless_ppp_unit_number(struct ipw_network *net); +int ipwireless_ppp_mru(const struct ipw_network *net); + +#endif diff --git a/drivers/tty/ipwireless/setup_protocol.h b/drivers/tty/ipwireless/setup_protocol.h new file mode 100644 index 000000000..d4a7ae257 --- /dev/null +++ b/drivers/tty/ipwireless/setup_protocol.h @@ -0,0 +1,109 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * IPWireless 3G PCMCIA Network Driver + * + * Original code + * by Stephen Blackheath , + * Ben Martel + * + * Copyrighted as follows: + * Copyright (C) 2004 by Symmetric Systems Ltd (NZ) + * + * Various driver changes and rewrites, port to new kernels + * Copyright (C) 2006-2007 Jiri Kosina + * + * Misc code cleanups and updates + * Copyright (C) 2007 David Sterba + */ + +#ifndef _IPWIRELESS_CS_SETUP_PROTOCOL_H_ +#define _IPWIRELESS_CS_SETUP_PROTOCOL_H_ + +/* Version of the setup protocol and transport protocols */ +#define TL_SETUP_VERSION 1 + +#define TL_SETUP_VERSION_QRY_TMO 1000 +#define TL_SETUP_MAX_VERSION_QRY 30 + +/* Message numbers 0-9 are obsoleted and must not be reused! */ +#define TL_SETUP_SIGNO_GET_VERSION_QRY 10 +#define TL_SETUP_SIGNO_GET_VERSION_RSP 11 +#define TL_SETUP_SIGNO_CONFIG_MSG 12 +#define TL_SETUP_SIGNO_CONFIG_DONE_MSG 13 +#define TL_SETUP_SIGNO_OPEN_MSG 14 +#define TL_SETUP_SIGNO_CLOSE_MSG 15 + +#define TL_SETUP_SIGNO_INFO_MSG 20 +#define TL_SETUP_SIGNO_INFO_MSG_ACK 21 + +#define TL_SETUP_SIGNO_REBOOT_MSG 22 +#define TL_SETUP_SIGNO_REBOOT_MSG_ACK 23 + +/* Synchronous start-messages */ +struct tl_setup_get_version_qry { + unsigned char sig_no; /* TL_SETUP_SIGNO_GET_VERSION_QRY */ +} __attribute__ ((__packed__)); + +struct tl_setup_get_version_rsp { + unsigned char sig_no; /* TL_SETUP_SIGNO_GET_VERSION_RSP */ + unsigned char version; /* TL_SETUP_VERSION */ +} __attribute__ ((__packed__)); + +struct tl_setup_config_msg { + unsigned char sig_no; /* TL_SETUP_SIGNO_CONFIG_MSG */ + unsigned char port_no; + unsigned char prio_data; + unsigned char prio_ctrl; +} __attribute__ ((__packed__)); + +struct tl_setup_config_done_msg { + unsigned char sig_no; /* TL_SETUP_SIGNO_CONFIG_DONE_MSG */ +} __attribute__ ((__packed__)); + +/* Asynchronous messages */ +struct tl_setup_open_msg { + unsigned char sig_no; /* TL_SETUP_SIGNO_OPEN_MSG */ + unsigned char port_no; +} __attribute__ ((__packed__)); + +struct tl_setup_close_msg { + unsigned char sig_no; /* TL_SETUP_SIGNO_CLOSE_MSG */ + unsigned char port_no; +} __attribute__ ((__packed__)); + +/* Driver type - for use in tl_setup_info_msg.driver_type */ +#define COMM_DRIVER 0 +#define NDISWAN_DRIVER 1 +#define NDISWAN_DRIVER_MAJOR_VERSION 2 +#define NDISWAN_DRIVER_MINOR_VERSION 0 + +/* + * It should not matter when this message comes over as we just store the + * results and send the ACK. + */ +struct tl_setup_info_msg { + unsigned char sig_no; /* TL_SETUP_SIGNO_INFO_MSG */ + unsigned char driver_type; + unsigned char major_version; + unsigned char minor_version; +} __attribute__ ((__packed__)); + +struct tl_setup_info_msgAck { + unsigned char sig_no; /* TL_SETUP_SIGNO_INFO_MSG_ACK */ +} __attribute__ ((__packed__)); + +struct TlSetupRebootMsgAck { + unsigned char sig_no; /* TL_SETUP_SIGNO_REBOOT_MSG_ACK */ +} __attribute__ ((__packed__)); + +/* Define a union of all the msgs that the driver can receive from the card.*/ +union ipw_setup_rx_msg { + unsigned char sig_no; + struct tl_setup_get_version_rsp version_rsp_msg; + struct tl_setup_open_msg open_msg; + struct tl_setup_close_msg close_msg; + struct tl_setup_info_msg InfoMsg; + struct tl_setup_info_msgAck info_msg_ack; +} __attribute__ ((__packed__)); + +#endif /* _IPWIRELESS_CS_SETUP_PROTOCOL_H_ */ diff --git a/drivers/tty/ipwireless/tty.c b/drivers/tty/ipwireless/tty.c new file mode 100644 index 000000000..23584769f --- /dev/null +++ b/drivers/tty/ipwireless/tty.c @@ -0,0 +1,635 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * IPWireless 3G PCMCIA Network Driver + * + * Original code + * by Stephen Blackheath , + * Ben Martel + * + * Copyrighted as follows: + * Copyright (C) 2004 by Symmetric Systems Ltd (NZ) + * + * Various driver changes and rewrites, port to new kernels + * Copyright (C) 2006-2007 Jiri Kosina + * + * Misc code cleanups and updates + * Copyright (C) 2007 David Sterba + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "tty.h" +#include "network.h" +#include "hardware.h" +#include "main.h" + +#define IPWIRELESS_PCMCIA_START (0) +#define IPWIRELESS_PCMCIA_MINORS (24) +#define IPWIRELESS_PCMCIA_MINOR_RANGE (8) + +#define TTYTYPE_MODEM (0) +#define TTYTYPE_MONITOR (1) +#define TTYTYPE_RAS_RAW (2) + +struct ipw_tty { + struct tty_port port; + int index; + struct ipw_hardware *hardware; + unsigned int channel_idx; + unsigned int secondary_channel_idx; + int tty_type; + struct ipw_network *network; + unsigned int control_lines; + struct mutex ipw_tty_mutex; + int tx_bytes_queued; + int closing; +}; + +static struct ipw_tty *ttys[IPWIRELESS_PCMCIA_MINORS]; + +static struct tty_driver *ipw_tty_driver; + +static char *tty_type_name(int tty_type) +{ + static char *channel_names[] = { + "modem", + "monitor", + "RAS-raw" + }; + + return channel_names[tty_type]; +} + +static struct ipw_tty *get_tty(int index) +{ + /* + * The 'ras_raw' channel is only available when 'loopback' mode + * is enabled. + * Number of minor starts with 16 (_RANGE * _RAS_RAW). + */ + if (!ipwireless_loopback && index >= + IPWIRELESS_PCMCIA_MINOR_RANGE * TTYTYPE_RAS_RAW) + return NULL; + + return ttys[index]; +} + +static int ipw_open(struct tty_struct *linux_tty, struct file *filp) +{ + struct ipw_tty *tty = get_tty(linux_tty->index); + + if (!tty) + return -ENODEV; + + mutex_lock(&tty->ipw_tty_mutex); + if (tty->port.count == 0) + tty->tx_bytes_queued = 0; + + tty->port.count++; + + tty->port.tty = linux_tty; + linux_tty->driver_data = tty; + tty->port.low_latency = 1; + + if (tty->tty_type == TTYTYPE_MODEM) + ipwireless_ppp_open(tty->network); + + mutex_unlock(&tty->ipw_tty_mutex); + + return 0; +} + +static void do_ipw_close(struct ipw_tty *tty) +{ + tty->port.count--; + + if (tty->port.count == 0) { + struct tty_struct *linux_tty = tty->port.tty; + + if (linux_tty != NULL) { + tty->port.tty = NULL; + linux_tty->driver_data = NULL; + + if (tty->tty_type == TTYTYPE_MODEM) + ipwireless_ppp_close(tty->network); + } + } +} + +static void ipw_hangup(struct tty_struct *linux_tty) +{ + struct ipw_tty *tty = linux_tty->driver_data; + + if (!tty) + return; + + mutex_lock(&tty->ipw_tty_mutex); + if (tty->port.count == 0) { + mutex_unlock(&tty->ipw_tty_mutex); + return; + } + + do_ipw_close(tty); + + mutex_unlock(&tty->ipw_tty_mutex); +} + +static void ipw_close(struct tty_struct *linux_tty, struct file *filp) +{ + ipw_hangup(linux_tty); +} + +/* Take data received from hardware, and send it out the tty */ +void ipwireless_tty_received(struct ipw_tty *tty, unsigned char *data, + unsigned int length) +{ + int work = 0; + + mutex_lock(&tty->ipw_tty_mutex); + + if (!tty->port.count) { + mutex_unlock(&tty->ipw_tty_mutex); + return; + } + mutex_unlock(&tty->ipw_tty_mutex); + + work = tty_insert_flip_string(&tty->port, data, length); + + if (work != length) + printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME + ": %d chars not inserted to flip buffer!\n", + length - work); + + if (work) + tty_flip_buffer_push(&tty->port); +} + +static void ipw_write_packet_sent_callback(void *callback_data, + unsigned int packet_length) +{ + struct ipw_tty *tty = callback_data; + + /* + * Packet has been sent, so we subtract the number of bytes from our + * tally of outstanding TX bytes. + */ + tty->tx_bytes_queued -= packet_length; +} + +static int ipw_write(struct tty_struct *linux_tty, + const unsigned char *buf, int count) +{ + struct ipw_tty *tty = linux_tty->driver_data; + int room, ret; + + if (!tty) + return -ENODEV; + + mutex_lock(&tty->ipw_tty_mutex); + if (!tty->port.count) { + mutex_unlock(&tty->ipw_tty_mutex); + return -EINVAL; + } + + room = IPWIRELESS_TX_QUEUE_SIZE - tty->tx_bytes_queued; + if (room < 0) + room = 0; + /* Don't allow caller to write any more than we have room for */ + if (count > room) + count = room; + + if (count == 0) { + mutex_unlock(&tty->ipw_tty_mutex); + return 0; + } + + ret = ipwireless_send_packet(tty->hardware, IPW_CHANNEL_RAS, + buf, count, + ipw_write_packet_sent_callback, tty); + if (ret < 0) { + mutex_unlock(&tty->ipw_tty_mutex); + return 0; + } + + tty->tx_bytes_queued += count; + mutex_unlock(&tty->ipw_tty_mutex); + + return count; +} + +static int ipw_write_room(struct tty_struct *linux_tty) +{ + struct ipw_tty *tty = linux_tty->driver_data; + int room; + + /* FIXME: Exactly how is the tty object locked here .. */ + if (!tty) + return -ENODEV; + + if (!tty->port.count) + return -EINVAL; + + room = IPWIRELESS_TX_QUEUE_SIZE - tty->tx_bytes_queued; + if (room < 0) + room = 0; + + return room; +} + +static int ipwireless_get_serial_info(struct tty_struct *linux_tty, + struct serial_struct *ss) +{ + struct ipw_tty *tty = linux_tty->driver_data; + + if (!tty) + return -ENODEV; + + if (!tty->port.count) + return -EINVAL; + + ss->type = PORT_UNKNOWN; + ss->line = tty->index; + ss->baud_base = 115200; + return 0; +} + +static int ipwireless_set_serial_info(struct tty_struct *linux_tty, + struct serial_struct *ss) +{ + return 0; /* Keeps the PCMCIA scripts happy. */ +} + +static int ipw_chars_in_buffer(struct tty_struct *linux_tty) +{ + struct ipw_tty *tty = linux_tty->driver_data; + + if (!tty) + return 0; + + if (!tty->port.count) + return 0; + + return tty->tx_bytes_queued; +} + +static int get_control_lines(struct ipw_tty *tty) +{ + unsigned int my = tty->control_lines; + unsigned int out = 0; + + if (my & IPW_CONTROL_LINE_RTS) + out |= TIOCM_RTS; + if (my & IPW_CONTROL_LINE_DTR) + out |= TIOCM_DTR; + if (my & IPW_CONTROL_LINE_CTS) + out |= TIOCM_CTS; + if (my & IPW_CONTROL_LINE_DSR) + out |= TIOCM_DSR; + if (my & IPW_CONTROL_LINE_DCD) + out |= TIOCM_CD; + + return out; +} + +static int set_control_lines(struct ipw_tty *tty, unsigned int set, + unsigned int clear) +{ + int ret; + + if (set & TIOCM_RTS) { + ret = ipwireless_set_RTS(tty->hardware, tty->channel_idx, 1); + if (ret) + return ret; + if (tty->secondary_channel_idx != -1) { + ret = ipwireless_set_RTS(tty->hardware, + tty->secondary_channel_idx, 1); + if (ret) + return ret; + } + } + if (set & TIOCM_DTR) { + ret = ipwireless_set_DTR(tty->hardware, tty->channel_idx, 1); + if (ret) + return ret; + if (tty->secondary_channel_idx != -1) { + ret = ipwireless_set_DTR(tty->hardware, + tty->secondary_channel_idx, 1); + if (ret) + return ret; + } + } + if (clear & TIOCM_RTS) { + ret = ipwireless_set_RTS(tty->hardware, tty->channel_idx, 0); + if (tty->secondary_channel_idx != -1) { + ret = ipwireless_set_RTS(tty->hardware, + tty->secondary_channel_idx, 0); + if (ret) + return ret; + } + } + if (clear & TIOCM_DTR) { + ret = ipwireless_set_DTR(tty->hardware, tty->channel_idx, 0); + if (tty->secondary_channel_idx != -1) { + ret = ipwireless_set_DTR(tty->hardware, + tty->secondary_channel_idx, 0); + if (ret) + return ret; + } + } + return 0; +} + +static int ipw_tiocmget(struct tty_struct *linux_tty) +{ + struct ipw_tty *tty = linux_tty->driver_data; + /* FIXME: Exactly how is the tty object locked here .. */ + + if (!tty) + return -ENODEV; + + if (!tty->port.count) + return -EINVAL; + + return get_control_lines(tty); +} + +static int +ipw_tiocmset(struct tty_struct *linux_tty, + unsigned int set, unsigned int clear) +{ + struct ipw_tty *tty = linux_tty->driver_data; + /* FIXME: Exactly how is the tty object locked here .. */ + + if (!tty) + return -ENODEV; + + if (!tty->port.count) + return -EINVAL; + + return set_control_lines(tty, set, clear); +} + +static int ipw_ioctl(struct tty_struct *linux_tty, + unsigned int cmd, unsigned long arg) +{ + struct ipw_tty *tty = linux_tty->driver_data; + + if (!tty) + return -ENODEV; + + if (!tty->port.count) + return -EINVAL; + + /* FIXME: Exactly how is the tty object locked here .. */ + if (tty->tty_type == TTYTYPE_MODEM) { + switch (cmd) { + case PPPIOCGCHAN: + { + int chan = ipwireless_ppp_channel_index( + tty->network); + + if (chan < 0) + return -ENODEV; + if (put_user(chan, (int __user *) arg)) + return -EFAULT; + } + return 0; + + case PPPIOCGUNIT: + { + int unit = ipwireless_ppp_unit_number( + tty->network); + + if (unit < 0) + return -ENODEV; + if (put_user(unit, (int __user *) arg)) + return -EFAULT; + } + return 0; + + case FIONREAD: + { + int val = 0; + + if (put_user(val, (int __user *) arg)) + return -EFAULT; + } + return 0; + case TCFLSH: + return tty_perform_flush(linux_tty, arg); + } + } + return -ENOIOCTLCMD; +} + +static int add_tty(int j, + struct ipw_hardware *hardware, + struct ipw_network *network, int channel_idx, + int secondary_channel_idx, int tty_type) +{ + ttys[j] = kzalloc(sizeof(struct ipw_tty), GFP_KERNEL); + if (!ttys[j]) + return -ENOMEM; + ttys[j]->index = j; + ttys[j]->hardware = hardware; + ttys[j]->channel_idx = channel_idx; + ttys[j]->secondary_channel_idx = secondary_channel_idx; + ttys[j]->network = network; + ttys[j]->tty_type = tty_type; + mutex_init(&ttys[j]->ipw_tty_mutex); + tty_port_init(&ttys[j]->port); + + tty_port_register_device(&ttys[j]->port, ipw_tty_driver, j, NULL); + ipwireless_associate_network_tty(network, channel_idx, ttys[j]); + + if (secondary_channel_idx != -1) + ipwireless_associate_network_tty(network, + secondary_channel_idx, + ttys[j]); + /* check if we provide raw device (if loopback is enabled) */ + if (get_tty(j)) + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": registering %s device ttyIPWp%d\n", + tty_type_name(tty_type), j); + + return 0; +} + +struct ipw_tty *ipwireless_tty_create(struct ipw_hardware *hardware, + struct ipw_network *network) +{ + int i, j; + + for (i = 0; i < IPWIRELESS_PCMCIA_MINOR_RANGE; i++) { + int allfree = 1; + + for (j = i; j < IPWIRELESS_PCMCIA_MINORS; + j += IPWIRELESS_PCMCIA_MINOR_RANGE) + if (ttys[j] != NULL) { + allfree = 0; + break; + } + + if (allfree) { + j = i; + + if (add_tty(j, hardware, network, + IPW_CHANNEL_DIALLER, IPW_CHANNEL_RAS, + TTYTYPE_MODEM)) + return NULL; + + j += IPWIRELESS_PCMCIA_MINOR_RANGE; + if (add_tty(j, hardware, network, + IPW_CHANNEL_DIALLER, -1, + TTYTYPE_MONITOR)) + return NULL; + + j += IPWIRELESS_PCMCIA_MINOR_RANGE; + if (add_tty(j, hardware, network, + IPW_CHANNEL_RAS, -1, + TTYTYPE_RAS_RAW)) + return NULL; + + return ttys[i]; + } + } + return NULL; +} + +/* + * Must be called before ipwireless_network_free(). + */ +void ipwireless_tty_free(struct ipw_tty *tty) +{ + int j; + struct ipw_network *network = ttys[tty->index]->network; + + for (j = tty->index; j < IPWIRELESS_PCMCIA_MINORS; + j += IPWIRELESS_PCMCIA_MINOR_RANGE) { + struct ipw_tty *ttyj = ttys[j]; + + if (ttyj) { + mutex_lock(&ttyj->ipw_tty_mutex); + if (get_tty(j)) + printk(KERN_INFO IPWIRELESS_PCCARD_NAME + ": deregistering %s device ttyIPWp%d\n", + tty_type_name(ttyj->tty_type), j); + ttyj->closing = 1; + if (ttyj->port.tty != NULL) { + mutex_unlock(&ttyj->ipw_tty_mutex); + tty_vhangup(ttyj->port.tty); + /* FIXME: Exactly how is the tty object locked here + against a parallel ioctl etc */ + /* FIXME2: hangup does not mean all processes + * are gone */ + mutex_lock(&ttyj->ipw_tty_mutex); + } + while (ttyj->port.count) + do_ipw_close(ttyj); + ipwireless_disassociate_network_ttys(network, + ttyj->channel_idx); + tty_unregister_device(ipw_tty_driver, j); + tty_port_destroy(&ttyj->port); + ttys[j] = NULL; + mutex_unlock(&ttyj->ipw_tty_mutex); + kfree(ttyj); + } + } +} + +static const struct tty_operations tty_ops = { + .open = ipw_open, + .close = ipw_close, + .hangup = ipw_hangup, + .write = ipw_write, + .write_room = ipw_write_room, + .ioctl = ipw_ioctl, + .chars_in_buffer = ipw_chars_in_buffer, + .tiocmget = ipw_tiocmget, + .tiocmset = ipw_tiocmset, + .set_serial = ipwireless_set_serial_info, + .get_serial = ipwireless_get_serial_info, +}; + +int ipwireless_tty_init(void) +{ + int result; + + ipw_tty_driver = alloc_tty_driver(IPWIRELESS_PCMCIA_MINORS); + if (!ipw_tty_driver) + return -ENOMEM; + + ipw_tty_driver->driver_name = IPWIRELESS_PCCARD_NAME; + ipw_tty_driver->name = "ttyIPWp"; + ipw_tty_driver->major = 0; + ipw_tty_driver->minor_start = IPWIRELESS_PCMCIA_START; + ipw_tty_driver->type = TTY_DRIVER_TYPE_SERIAL; + ipw_tty_driver->subtype = SERIAL_TYPE_NORMAL; + ipw_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; + ipw_tty_driver->init_termios = tty_std_termios; + ipw_tty_driver->init_termios.c_cflag = + B9600 | CS8 | CREAD | HUPCL | CLOCAL; + ipw_tty_driver->init_termios.c_ispeed = 9600; + ipw_tty_driver->init_termios.c_ospeed = 9600; + tty_set_operations(ipw_tty_driver, &tty_ops); + result = tty_register_driver(ipw_tty_driver); + if (result) { + printk(KERN_ERR IPWIRELESS_PCCARD_NAME + ": failed to register tty driver\n"); + put_tty_driver(ipw_tty_driver); + return result; + } + + return 0; +} + +void ipwireless_tty_release(void) +{ + int ret; + + ret = tty_unregister_driver(ipw_tty_driver); + put_tty_driver(ipw_tty_driver); + if (ret != 0) + printk(KERN_ERR IPWIRELESS_PCCARD_NAME + ": tty_unregister_driver failed with code %d\n", ret); +} + +int ipwireless_tty_is_modem(struct ipw_tty *tty) +{ + return tty->tty_type == TTYTYPE_MODEM; +} + +void +ipwireless_tty_notify_control_line_change(struct ipw_tty *tty, + unsigned int channel_idx, + unsigned int control_lines, + unsigned int changed_mask) +{ + unsigned int old_control_lines = tty->control_lines; + + tty->control_lines = (tty->control_lines & ~changed_mask) + | (control_lines & changed_mask); + + /* + * If DCD is de-asserted, we close the tty so pppd can tell that we + * have gone offline. + */ + if ((old_control_lines & IPW_CONTROL_LINE_DCD) + && !(tty->control_lines & IPW_CONTROL_LINE_DCD) + && tty->port.tty) { + tty_hangup(tty->port.tty); + } +} + diff --git a/drivers/tty/ipwireless/tty.h b/drivers/tty/ipwireless/tty.h new file mode 100644 index 000000000..ec698d9f3 --- /dev/null +++ b/drivers/tty/ipwireless/tty.h @@ -0,0 +1,46 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * IPWireless 3G PCMCIA Network Driver + * + * Original code + * by Stephen Blackheath , + * Ben Martel + * + * Copyrighted as follows: + * Copyright (C) 2004 by Symmetric Systems Ltd (NZ) + * + * Various driver changes and rewrites, port to new kernels + * Copyright (C) 2006-2007 Jiri Kosina + * + * Misc code cleanups and updates + * Copyright (C) 2007 David Sterba + */ + +#ifndef _IPWIRELESS_CS_TTY_H_ +#define _IPWIRELESS_CS_TTY_H_ + +#include +#include + +#include +#include + +struct ipw_tty; +struct ipw_network; +struct ipw_hardware; + +int ipwireless_tty_init(void); +void ipwireless_tty_release(void); + +struct ipw_tty *ipwireless_tty_create(struct ipw_hardware *hw, + struct ipw_network *net); +void ipwireless_tty_free(struct ipw_tty *tty); +void ipwireless_tty_received(struct ipw_tty *tty, unsigned char *data, + unsigned int length); +int ipwireless_tty_is_modem(struct ipw_tty *tty); +void ipwireless_tty_notify_control_line_change(struct ipw_tty *tty, + unsigned int channel_idx, + unsigned int control_lines, + unsigned int changed_mask); + +#endif diff --git a/drivers/tty/isicom.c b/drivers/tty/isicom.c new file mode 100644 index 000000000..3b2f9fb01 --- /dev/null +++ b/drivers/tty/isicom.c @@ -0,0 +1,1699 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Original driver code supplied by Multi-Tech + * + * Changes + * 1/9/98 alan@lxorguk.ukuu.org.uk + * Merge to 2.0.x kernel tree + * Obtain and use official major/minors + * Loader switched to a misc device + * (fixed range check bug as a side effect) + * Printk clean up + * 9/12/98 alan@lxorguk.ukuu.org.uk + * Rough port to 2.1.x + * + * 10/6/99 sameer Merged the ISA and PCI drivers to + * a new unified driver. + * + * 3/9/99 sameer Added support for ISI4616 cards. + * + * 16/9/99 sameer We do not force RTS low anymore. + * This is to prevent the firmware + * from getting confused. + * + * 26/10/99 sameer Cosmetic changes:The driver now + * dumps the Port Count information + * along with I/O address and IRQ. + * + * 13/12/99 sameer Fixed the problem with IRQ sharing. + * + * 10/5/00 sameer Fixed isicom_shutdown_board() + * to not lower DTR on all the ports + * when the last port on the card is + * closed. + * + * 10/5/00 sameer Signal mask setup command added + * to isicom_setup_port and + * isicom_shutdown_port. + * + * 24/5/00 sameer The driver is now SMP aware. + * + * + * 27/11/00 Vinayak P Risbud Fixed the Driver Crash Problem + * + * + * 03/01/01 anil .s Added support for resetting the + * internal modems on ISI cards. + * + * 08/02/01 anil .s Upgraded the driver for kernel + * 2.4.x + * + * 11/04/01 Kevin Fixed firmware load problem with + * ISIHP-4X card + * + * 30/04/01 anil .s Fixed the remote login through + * ISI port problem. Now the link + * does not go down before password + * prompt. + * + * 03/05/01 anil .s Fixed the problem with IRQ sharing + * among ISI-PCI cards. + * + * 03/05/01 anil .s Added support to display the version + * info during insmod as well as module + * listing by lsmod. + * + * 10/05/01 anil .s Done the modifications to the source + * file and Install script so that the + * same installation can be used for + * 2.2.x and 2.4.x kernel. + * + * 06/06/01 anil .s Now we drop both dtr and rts during + * shutdown_port as well as raise them + * during isicom_config_port. + * + * 09/06/01 acme@conectiva.com.br use capable, not suser, do + * restore_flags on failure in + * isicom_send_break, verify put_user + * result + * + * 11/02/03 ranjeeth Added support for 230 Kbps and 460 Kbps + * Baud index extended to 21 + * + * 20/03/03 ranjeeth Made to work for Linux Advanced server. + * Taken care of license warning. + * + * 10/12/03 Ravindra Made to work for Fedora Core 1 of + * Red Hat Distribution + * + * 06/01/05 Alan Cox Merged the ISI and base kernel strands + * into a single 2.6 driver + * + * *********************************************************** + * + * To use this driver you also need the support package. You + * can find this in RPM format on + * ftp://ftp.linux.org.uk/pub/linux/alan + * + * You can find the original tools for this direct from Multitech + * ftp://ftp.multitech.com/ISI-Cards/ + * + * Having installed the cards the module options (/etc/modprobe.d/) + * + * options isicom io=card1,card2,card3,card4 irq=card1,card2,card3,card4 + * + * Omit those entries for boards you don't have installed. + * + * TODO + * Merge testing + * 64-bit verification + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +#include + +#define InterruptTheCard(base) outw(0, (base) + 0xc) +#define ClearInterrupt(base) inw((base) + 0x0a) + +#ifdef DEBUG +#define isicom_paranoia_check(a, b, c) __isicom_paranoia_check((a), (b), (c)) +#else +#define isicom_paranoia_check(a, b, c) 0 +#endif + +static int isicom_probe(struct pci_dev *, const struct pci_device_id *); +static void isicom_remove(struct pci_dev *); + +static const struct pci_device_id isicom_pci_tbl[] = { + { PCI_DEVICE(VENDOR_ID, 0x2028) }, + { PCI_DEVICE(VENDOR_ID, 0x2051) }, + { PCI_DEVICE(VENDOR_ID, 0x2052) }, + { PCI_DEVICE(VENDOR_ID, 0x2053) }, + { PCI_DEVICE(VENDOR_ID, 0x2054) }, + { PCI_DEVICE(VENDOR_ID, 0x2055) }, + { PCI_DEVICE(VENDOR_ID, 0x2056) }, + { PCI_DEVICE(VENDOR_ID, 0x2057) }, + { PCI_DEVICE(VENDOR_ID, 0x2058) }, + { 0 } +}; +MODULE_DEVICE_TABLE(pci, isicom_pci_tbl); + +static struct pci_driver isicom_driver = { + .name = "isicom", + .id_table = isicom_pci_tbl, + .probe = isicom_probe, + .remove = isicom_remove +}; + +static int prev_card = 3; /* start servicing isi_card[0] */ +static struct tty_driver *isicom_normal; + +static void isicom_tx(struct timer_list *unused); +static void isicom_start(struct tty_struct *tty); + +static DEFINE_TIMER(tx, isicom_tx); + +/* baud index mappings from linux defns to isi */ + +static signed char linuxb_to_isib[] = { + -1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 16, 17, 18, 19, 20, 21 +}; + +struct isi_board { + unsigned long base; + int irq; + unsigned char port_count; + unsigned short status; + unsigned short port_status; /* each bit for each port */ + unsigned short shift_count; + struct isi_port *ports; + signed char count; + spinlock_t card_lock; /* Card wide lock 11/5/00 -sameer */ + unsigned long flags; + unsigned int index; +}; + +struct isi_port { + unsigned short magic; + struct tty_port port; + u16 channel; + u16 status; + struct isi_board *card; + unsigned char *xmit_buf; + int xmit_head; + int xmit_tail; + int xmit_cnt; +}; + +static struct isi_board isi_card[BOARD_COUNT]; +static struct isi_port isi_ports[PORT_COUNT]; + +/* + * Locking functions for card level locking. We need to own both + * the kernel lock for the card and have the card in a position that + * it wants to talk. + */ + +static int WaitTillCardIsFree(unsigned long base) +{ + unsigned int count = 0; + + while (!(inw(base + 0xe) & 0x1) && count++ < 100) + mdelay(1); + + return !(inw(base + 0xe) & 0x1); +} + +static int lock_card(struct isi_board *card) +{ + unsigned long base = card->base; + unsigned int retries, a; + + for (retries = 0; retries < 10; retries++) { + spin_lock_irqsave(&card->card_lock, card->flags); + for (a = 0; a < 10; a++) { + if (inw(base + 0xe) & 0x1) + return 1; + udelay(10); + } + spin_unlock_irqrestore(&card->card_lock, card->flags); + msleep(10); + } + pr_warn("Failed to lock Card (0x%lx)\n", card->base); + + return 0; /* Failed to acquire the card! */ +} + +static void unlock_card(struct isi_board *card) +{ + spin_unlock_irqrestore(&card->card_lock, card->flags); +} + +/* + * ISI Card specific ops ... + */ + +/* card->lock HAS to be held */ +static void raise_dtr(struct isi_port *port) +{ + struct isi_board *card = port->card; + unsigned long base = card->base; + u16 channel = port->channel; + + if (WaitTillCardIsFree(base)) + return; + + outw(0x8000 | (channel << card->shift_count) | 0x02, base); + outw(0x0504, base); + InterruptTheCard(base); + port->status |= ISI_DTR; +} + +/* card->lock HAS to be held */ +static void drop_dtr(struct isi_port *port) +{ + struct isi_board *card = port->card; + unsigned long base = card->base; + u16 channel = port->channel; + + if (WaitTillCardIsFree(base)) + return; + + outw(0x8000 | (channel << card->shift_count) | 0x02, base); + outw(0x0404, base); + InterruptTheCard(base); + port->status &= ~ISI_DTR; +} + +/* card->lock HAS to be held */ +static inline void raise_rts(struct isi_port *port) +{ + struct isi_board *card = port->card; + unsigned long base = card->base; + u16 channel = port->channel; + + if (WaitTillCardIsFree(base)) + return; + + outw(0x8000 | (channel << card->shift_count) | 0x02, base); + outw(0x0a04, base); + InterruptTheCard(base); + port->status |= ISI_RTS; +} + +/* card->lock HAS to be held */ +static inline void drop_rts(struct isi_port *port) +{ + struct isi_board *card = port->card; + unsigned long base = card->base; + u16 channel = port->channel; + + if (WaitTillCardIsFree(base)) + return; + + outw(0x8000 | (channel << card->shift_count) | 0x02, base); + outw(0x0804, base); + InterruptTheCard(base); + port->status &= ~ISI_RTS; +} + +/* card->lock MUST NOT be held */ + +static void isicom_dtr_rts(struct tty_port *port, int on) +{ + struct isi_port *ip = container_of(port, struct isi_port, port); + struct isi_board *card = ip->card; + unsigned long base = card->base; + u16 channel = ip->channel; + + if (!lock_card(card)) + return; + + if (on) { + outw(0x8000 | (channel << card->shift_count) | 0x02, base); + outw(0x0f04, base); + InterruptTheCard(base); + ip->status |= (ISI_DTR | ISI_RTS); + } else { + outw(0x8000 | (channel << card->shift_count) | 0x02, base); + outw(0x0C04, base); + InterruptTheCard(base); + ip->status &= ~(ISI_DTR | ISI_RTS); + } + unlock_card(card); +} + +/* card->lock HAS to be held */ +static void drop_dtr_rts(struct isi_port *port) +{ + struct isi_board *card = port->card; + unsigned long base = card->base; + u16 channel = port->channel; + + if (WaitTillCardIsFree(base)) + return; + + outw(0x8000 | (channel << card->shift_count) | 0x02, base); + outw(0x0c04, base); + InterruptTheCard(base); + port->status &= ~(ISI_RTS | ISI_DTR); +} + +/* + * ISICOM Driver specific routines ... + * + */ + +static inline int __isicom_paranoia_check(struct isi_port const *port, + char *name, const char *routine) +{ + if (!port) { + pr_warn("Warning: bad isicom magic for dev %s in %s\n", + name, routine); + return 1; + } + if (port->magic != ISICOM_MAGIC) { + pr_warn("Warning: NULL isicom port for dev %s in %s\n", + name, routine); + return 1; + } + + return 0; +} + +/* + * Transmitter. + * + * We shovel data into the card buffers on a regular basis. The card + * will do the rest of the work for us. + */ + +static void isicom_tx(struct timer_list *unused) +{ + unsigned long flags, base; + unsigned int retries; + short count = (BOARD_COUNT-1), card; + short txcount, wrd, residue, word_count, cnt; + struct isi_port *port; + struct tty_struct *tty; + + /* find next active board */ + card = (prev_card + 1) & 0x0003; + while (count-- > 0) { + if (isi_card[card].status & BOARD_ACTIVE) + break; + card = (card + 1) & 0x0003; + } + if (!(isi_card[card].status & BOARD_ACTIVE)) + goto sched_again; + + prev_card = card; + + count = isi_card[card].port_count; + port = isi_card[card].ports; + base = isi_card[card].base; + + spin_lock_irqsave(&isi_card[card].card_lock, flags); + for (retries = 0; retries < 100; retries++) { + if (inw(base + 0xe) & 0x1) + break; + udelay(2); + } + if (retries >= 100) + goto unlock; + + tty = tty_port_tty_get(&port->port); + if (tty == NULL) + goto put_unlock; + + for (; count > 0; count--, port++) { + /* port not active or tx disabled to force flow control */ + if (!tty_port_initialized(&port->port) || + !(port->status & ISI_TXOK)) + continue; + + txcount = min_t(short, TX_SIZE, port->xmit_cnt); + if (txcount <= 0 || tty->stopped || tty->hw_stopped) + continue; + + if (!(inw(base + 0x02) & (1 << port->channel))) + continue; + + pr_debug("txing %d bytes, port%d.\n", + txcount, port->channel + 1); + outw((port->channel << isi_card[card].shift_count) | txcount, + base); + residue = NO; + wrd = 0; + while (1) { + cnt = min_t(int, txcount, (SERIAL_XMIT_SIZE + - port->xmit_tail)); + if (residue == YES) { + residue = NO; + if (cnt > 0) { + wrd |= (port->port.xmit_buf[port->xmit_tail] + << 8); + port->xmit_tail = (port->xmit_tail + 1) + & (SERIAL_XMIT_SIZE - 1); + port->xmit_cnt--; + txcount--; + cnt--; + outw(wrd, base); + } else { + outw(wrd, base); + break; + } + } + if (cnt <= 0) + break; + word_count = cnt >> 1; + outsw(base, port->port.xmit_buf+port->xmit_tail, word_count); + port->xmit_tail = (port->xmit_tail + + (word_count << 1)) & (SERIAL_XMIT_SIZE - 1); + txcount -= (word_count << 1); + port->xmit_cnt -= (word_count << 1); + if (cnt & 0x0001) { + residue = YES; + wrd = port->port.xmit_buf[port->xmit_tail]; + port->xmit_tail = (port->xmit_tail + 1) + & (SERIAL_XMIT_SIZE - 1); + port->xmit_cnt--; + txcount--; + } + } + + InterruptTheCard(base); + if (port->xmit_cnt <= 0) + port->status &= ~ISI_TXOK; + if (port->xmit_cnt <= WAKEUP_CHARS) + tty_wakeup(tty); + } + +put_unlock: + tty_kref_put(tty); +unlock: + spin_unlock_irqrestore(&isi_card[card].card_lock, flags); + /* schedule another tx for hopefully in about 10ms */ +sched_again: + mod_timer(&tx, jiffies + msecs_to_jiffies(10)); +} + +/* + * Main interrupt handler routine + */ + +static irqreturn_t isicom_interrupt(int irq, void *dev_id) +{ + struct isi_board *card = dev_id; + struct isi_port *port; + struct tty_struct *tty; + unsigned long base; + u16 header, word_count, count, channel; + short byte_count; + unsigned char *rp; + + if (!card || !(card->status & FIRMWARE_LOADED)) + return IRQ_NONE; + + base = card->base; + + /* did the card interrupt us? */ + if (!(inw(base + 0x0e) & 0x02)) + return IRQ_NONE; + + spin_lock(&card->card_lock); + + /* + * disable any interrupts from the PCI card and lower the + * interrupt line + */ + outw(0x8000, base+0x04); + ClearInterrupt(base); + + inw(base); /* get the dummy word out */ + header = inw(base); + channel = (header & 0x7800) >> card->shift_count; + byte_count = header & 0xff; + + if (channel + 1 > card->port_count) { + pr_warn("%s(0x%lx): %d(channel) > port_count\n", + __func__, base, channel + 1); + outw(0x0000, base+0x04); /* enable interrupts */ + spin_unlock(&card->card_lock); + return IRQ_HANDLED; + } + port = card->ports + channel; + if (!tty_port_initialized(&port->port)) { + outw(0x0000, base+0x04); /* enable interrupts */ + spin_unlock(&card->card_lock); + return IRQ_HANDLED; + } + + tty = tty_port_tty_get(&port->port); + if (tty == NULL) { + while (byte_count > 1) { + inw(base); + byte_count -= 2; + } + if (byte_count & 0x01) + inw(base); + outw(0x0000, base+0x04); /* enable interrupts */ + spin_unlock(&card->card_lock); + return IRQ_HANDLED; + } + + if (header & 0x8000) { /* Status Packet */ + header = inw(base); + switch (header & 0xff) { + case 0: /* Change in EIA signals */ + if (tty_port_check_carrier(&port->port)) { + if (port->status & ISI_DCD) { + if (!(header & ISI_DCD)) { + /* Carrier has been lost */ + pr_debug("%s: DCD->low.\n", + __func__); + port->status &= ~ISI_DCD; + tty_hangup(tty); + } + } else if (header & ISI_DCD) { + /* Carrier has been detected */ + pr_debug("%s: DCD->high.\n", + __func__); + port->status |= ISI_DCD; + wake_up_interruptible(&port->port.open_wait); + } + } else { + if (header & ISI_DCD) + port->status |= ISI_DCD; + else + port->status &= ~ISI_DCD; + } + + if (tty_port_cts_enabled(&port->port)) { + if (tty->hw_stopped) { + if (header & ISI_CTS) { + tty->hw_stopped = 0; + /* start tx ing */ + port->status |= (ISI_TXOK + | ISI_CTS); + tty_wakeup(tty); + } + } else if (!(header & ISI_CTS)) { + tty->hw_stopped = 1; + /* stop tx ing */ + port->status &= ~(ISI_TXOK | ISI_CTS); + } + } else { + if (header & ISI_CTS) + port->status |= ISI_CTS; + else + port->status &= ~ISI_CTS; + } + + if (header & ISI_DSR) + port->status |= ISI_DSR; + else + port->status &= ~ISI_DSR; + + if (header & ISI_RI) + port->status |= ISI_RI; + else + port->status &= ~ISI_RI; + + break; + + case 1: /* Received Break !!! */ + tty_insert_flip_char(&port->port, 0, TTY_BREAK); + if (port->port.flags & ASYNC_SAK) + do_SAK(tty); + tty_flip_buffer_push(&port->port); + break; + + case 2: /* Statistics */ + pr_debug("%s: stats!!!\n", __func__); + break; + + default: + pr_debug("%s: Unknown code in status packet.\n", + __func__); + break; + } + } else { /* Data Packet */ + count = tty_prepare_flip_string(&port->port, &rp, + byte_count & ~1); + pr_debug("%s: Can rx %d of %d bytes.\n", + __func__, count, byte_count); + word_count = count >> 1; + insw(base, rp, word_count); + byte_count -= (word_count << 1); + if (count & 0x0001) { + tty_insert_flip_char(&port->port, inw(base) & 0xff, + TTY_NORMAL); + byte_count -= 2; + } + if (byte_count > 0) { + pr_debug("%s(0x%lx:%d): Flip buffer overflow! dropping bytes...\n", + __func__, base, channel + 1); + /* drain out unread xtra data */ + while (byte_count > 0) { + inw(base); + byte_count -= 2; + } + } + tty_flip_buffer_push(&port->port); + } + outw(0x0000, base+0x04); /* enable interrupts */ + spin_unlock(&card->card_lock); + tty_kref_put(tty); + + return IRQ_HANDLED; +} + +static void isicom_config_port(struct tty_struct *tty) +{ + struct isi_port *port = tty->driver_data; + struct isi_board *card = port->card; + unsigned long baud; + unsigned long base = card->base; + u16 channel_setup, channel = port->channel, + shift_count = card->shift_count; + unsigned char flow_ctrl; + + /* FIXME: Switch to new tty baud API */ + baud = C_BAUD(tty); + if (baud & CBAUDEX) { + baud &= ~CBAUDEX; + + /* if CBAUDEX bit is on and the baud is set to either 50 or 75 + * then the card is programmed for 57.6Kbps or 115Kbps + * respectively. + */ + + /* 1,2,3,4 => 57.6, 115.2, 230, 460 kbps resp. */ + if (baud < 1 || baud > 4) + tty->termios.c_cflag &= ~CBAUDEX; + else + baud += 15; + } + if (baud == 15) { + + /* the ASYNC_SPD_HI and ASYNC_SPD_VHI options are set + * by the set_serial_info ioctl ... this is done by + * the 'setserial' utility. + */ + + if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) + baud++; /* 57.6 Kbps */ + if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) + baud += 2; /* 115 Kbps */ + if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) + baud += 3; /* 230 kbps*/ + if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) + baud += 4; /* 460 kbps*/ + } + if (linuxb_to_isib[baud] == -1) { + /* hang up */ + drop_dtr(port); + return; + } else + raise_dtr(port); + + if (WaitTillCardIsFree(base) == 0) { + outw(0x8000 | (channel << shift_count) | 0x03, base); + outw(linuxb_to_isib[baud] << 8 | 0x03, base); + channel_setup = 0; + switch (C_CSIZE(tty)) { + case CS5: + channel_setup |= ISICOM_CS5; + break; + case CS6: + channel_setup |= ISICOM_CS6; + break; + case CS7: + channel_setup |= ISICOM_CS7; + break; + case CS8: + channel_setup |= ISICOM_CS8; + break; + } + + if (C_CSTOPB(tty)) + channel_setup |= ISICOM_2SB; + if (C_PARENB(tty)) { + channel_setup |= ISICOM_EVPAR; + if (C_PARODD(tty)) + channel_setup |= ISICOM_ODPAR; + } + outw(channel_setup, base); + InterruptTheCard(base); + } + tty_port_set_check_carrier(&port->port, !C_CLOCAL(tty)); + + /* flow control settings ...*/ + flow_ctrl = 0; + tty_port_set_cts_flow(&port->port, C_CRTSCTS(tty)); + if (C_CRTSCTS(tty)) + flow_ctrl |= ISICOM_CTSRTS; + if (I_IXON(tty)) + flow_ctrl |= ISICOM_RESPOND_XONXOFF; + if (I_IXOFF(tty)) + flow_ctrl |= ISICOM_INITIATE_XONXOFF; + + if (WaitTillCardIsFree(base) == 0) { + outw(0x8000 | (channel << shift_count) | 0x04, base); + outw(flow_ctrl << 8 | 0x05, base); + outw((STOP_CHAR(tty)) << 8 | (START_CHAR(tty)), base); + InterruptTheCard(base); + } + + /* rx enabled -> enable port for rx on the card */ + if (C_CREAD(tty)) { + card->port_status |= (1 << channel); + outw(card->port_status, base + 0x02); + } +} + +/* open et all */ + +static inline void isicom_setup_board(struct isi_board *bp) +{ + int channel; + struct isi_port *port; + + bp->count++; + if (!(bp->status & BOARD_INIT)) { + port = bp->ports; + for (channel = 0; channel < bp->port_count; channel++, port++) + drop_dtr_rts(port); + } + bp->status |= BOARD_ACTIVE | BOARD_INIT; +} + +/* Activate and thus setup board are protected from races against shutdown + by the tty_port mutex */ + +static int isicom_activate(struct tty_port *tport, struct tty_struct *tty) +{ + struct isi_port *port = container_of(tport, struct isi_port, port); + struct isi_board *card = port->card; + unsigned long flags; + + if (tty_port_alloc_xmit_buf(tport) < 0) + return -ENOMEM; + + spin_lock_irqsave(&card->card_lock, flags); + isicom_setup_board(card); + + port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; + + /* discard any residual data */ + if (WaitTillCardIsFree(card->base) == 0) { + outw(0x8000 | (port->channel << card->shift_count) | 0x02, + card->base); + outw(((ISICOM_KILLTX | ISICOM_KILLRX) << 8) | 0x06, card->base); + InterruptTheCard(card->base); + } + isicom_config_port(tty); + spin_unlock_irqrestore(&card->card_lock, flags); + + return 0; +} + +static int isicom_carrier_raised(struct tty_port *port) +{ + struct isi_port *ip = container_of(port, struct isi_port, port); + return (ip->status & ISI_DCD)?1 : 0; +} + +static struct tty_port *isicom_find_port(struct tty_struct *tty) +{ + struct isi_port *port; + struct isi_board *card; + unsigned int board; + int line = tty->index; + + board = BOARD(line); + card = &isi_card[board]; + + if (!(card->status & FIRMWARE_LOADED)) + return NULL; + + /* open on a port greater than the port count for the card !!! */ + if (line > ((board * 16) + card->port_count - 1)) + return NULL; + + port = &isi_ports[line]; + if (isicom_paranoia_check(port, tty->name, "isicom_open")) + return NULL; + + return &port->port; +} + +static int isicom_open(struct tty_struct *tty, struct file *filp) +{ + struct isi_port *port; + struct tty_port *tport; + + tport = isicom_find_port(tty); + if (tport == NULL) + return -ENODEV; + port = container_of(tport, struct isi_port, port); + + tty->driver_data = port; + return tty_port_open(tport, tty, filp); +} + +/* close et all */ + +/* card->lock HAS to be held */ +static void isicom_shutdown_port(struct isi_port *port) +{ + struct isi_board *card = port->card; + + if (--card->count < 0) { + pr_debug("%s: bad board(0x%lx) count %d.\n", + __func__, card->base, card->count); + card->count = 0; + } + /* last port was closed, shutdown that board too */ + if (!card->count) + card->status &= BOARD_ACTIVE; +} + +static void isicom_flush_buffer(struct tty_struct *tty) +{ + struct isi_port *port = tty->driver_data; + struct isi_board *card = port->card; + unsigned long flags; + + if (isicom_paranoia_check(port, tty->name, "isicom_flush_buffer")) + return; + + spin_lock_irqsave(&card->card_lock, flags); + port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; + spin_unlock_irqrestore(&card->card_lock, flags); + + tty_wakeup(tty); +} + +static void isicom_shutdown(struct tty_port *port) +{ + struct isi_port *ip = container_of(port, struct isi_port, port); + struct isi_board *card = ip->card; + unsigned long flags; + + /* indicate to the card that no more data can be received + on this port */ + spin_lock_irqsave(&card->card_lock, flags); + card->port_status &= ~(1 << ip->channel); + outw(card->port_status, card->base + 0x02); + isicom_shutdown_port(ip); + spin_unlock_irqrestore(&card->card_lock, flags); + tty_port_free_xmit_buf(port); +} + +static void isicom_close(struct tty_struct *tty, struct file *filp) +{ + struct isi_port *ip = tty->driver_data; + struct tty_port *port; + + if (ip == NULL) + return; + + port = &ip->port; + if (isicom_paranoia_check(ip, tty->name, "isicom_close")) + return; + tty_port_close(port, tty, filp); +} + +/* write et all */ +static int isicom_write(struct tty_struct *tty, const unsigned char *buf, + int count) +{ + struct isi_port *port = tty->driver_data; + struct isi_board *card = port->card; + unsigned long flags; + int cnt, total = 0; + + if (isicom_paranoia_check(port, tty->name, "isicom_write")) + return 0; + + spin_lock_irqsave(&card->card_lock, flags); + + while (1) { + cnt = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt + - 1, SERIAL_XMIT_SIZE - port->xmit_head)); + if (cnt <= 0) + break; + + memcpy(port->port.xmit_buf + port->xmit_head, buf, cnt); + port->xmit_head = (port->xmit_head + cnt) & (SERIAL_XMIT_SIZE + - 1); + port->xmit_cnt += cnt; + buf += cnt; + count -= cnt; + total += cnt; + } + if (port->xmit_cnt && !tty->stopped && !tty->hw_stopped) + port->status |= ISI_TXOK; + spin_unlock_irqrestore(&card->card_lock, flags); + return total; +} + +/* put_char et all */ +static int isicom_put_char(struct tty_struct *tty, unsigned char ch) +{ + struct isi_port *port = tty->driver_data; + struct isi_board *card = port->card; + unsigned long flags; + + if (isicom_paranoia_check(port, tty->name, "isicom_put_char")) + return 0; + + spin_lock_irqsave(&card->card_lock, flags); + if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1) { + spin_unlock_irqrestore(&card->card_lock, flags); + return 0; + } + + port->port.xmit_buf[port->xmit_head++] = ch; + port->xmit_head &= (SERIAL_XMIT_SIZE - 1); + port->xmit_cnt++; + spin_unlock_irqrestore(&card->card_lock, flags); + return 1; +} + +/* flush_chars et all */ +static void isicom_flush_chars(struct tty_struct *tty) +{ + struct isi_port *port = tty->driver_data; + + if (isicom_paranoia_check(port, tty->name, "isicom_flush_chars")) + return; + + if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || + !port->port.xmit_buf) + return; + + /* this tells the transmitter to consider this port for + data output to the card ... that's the best we can do. */ + port->status |= ISI_TXOK; +} + +/* write_room et all */ +static int isicom_write_room(struct tty_struct *tty) +{ + struct isi_port *port = tty->driver_data; + int free; + + if (isicom_paranoia_check(port, tty->name, "isicom_write_room")) + return 0; + + free = SERIAL_XMIT_SIZE - port->xmit_cnt - 1; + if (free < 0) + free = 0; + return free; +} + +/* chars_in_buffer et all */ +static int isicom_chars_in_buffer(struct tty_struct *tty) +{ + struct isi_port *port = tty->driver_data; + if (isicom_paranoia_check(port, tty->name, "isicom_chars_in_buffer")) + return 0; + return port->xmit_cnt; +} + +/* ioctl et all */ +static int isicom_send_break(struct tty_struct *tty, int length) +{ + struct isi_port *port = tty->driver_data; + struct isi_board *card = port->card; + unsigned long base = card->base; + + if (length == -1) + return -EOPNOTSUPP; + + if (!lock_card(card)) + return -EINVAL; + + outw(0x8000 | ((port->channel) << (card->shift_count)) | 0x3, base); + outw((length & 0xff) << 8 | 0x00, base); + outw((length & 0xff00u), base); + InterruptTheCard(base); + + unlock_card(card); + return 0; +} + +static int isicom_tiocmget(struct tty_struct *tty) +{ + struct isi_port *port = tty->driver_data; + /* just send the port status */ + u16 status = port->status; + + if (isicom_paranoia_check(port, tty->name, "isicom_ioctl")) + return -ENODEV; + + return ((status & ISI_RTS) ? TIOCM_RTS : 0) | + ((status & ISI_DTR) ? TIOCM_DTR : 0) | + ((status & ISI_DCD) ? TIOCM_CAR : 0) | + ((status & ISI_DSR) ? TIOCM_DSR : 0) | + ((status & ISI_CTS) ? TIOCM_CTS : 0) | + ((status & ISI_RI ) ? TIOCM_RI : 0); +} + +static int isicom_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct isi_port *port = tty->driver_data; + unsigned long flags; + + if (isicom_paranoia_check(port, tty->name, "isicom_ioctl")) + return -ENODEV; + + spin_lock_irqsave(&port->card->card_lock, flags); + if (set & TIOCM_RTS) + raise_rts(port); + if (set & TIOCM_DTR) + raise_dtr(port); + + if (clear & TIOCM_RTS) + drop_rts(port); + if (clear & TIOCM_DTR) + drop_dtr(port); + spin_unlock_irqrestore(&port->card->card_lock, flags); + + return 0; +} + +static int isicom_set_serial_info(struct tty_struct *tty, + struct serial_struct *ss) +{ + struct isi_port *port = tty->driver_data; + int reconfig_port; + + if (isicom_paranoia_check(port, tty->name, "isicom_ioctl")) + return -ENODEV; + + mutex_lock(&port->port.mutex); + reconfig_port = ((port->port.flags & ASYNC_SPD_MASK) != + (ss->flags & ASYNC_SPD_MASK)); + + if (!capable(CAP_SYS_ADMIN)) { + if ((ss->close_delay != port->port.close_delay) || + (ss->closing_wait != port->port.closing_wait) || + ((ss->flags & ~ASYNC_USR_MASK) != + (port->port.flags & ~ASYNC_USR_MASK))) { + mutex_unlock(&port->port.mutex); + return -EPERM; + } + port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) | + (ss->flags & ASYNC_USR_MASK)); + } else { + port->port.close_delay = ss->close_delay; + port->port.closing_wait = ss->closing_wait; + port->port.flags = ((port->port.flags & ~ASYNC_FLAGS) | + (ss->flags & ASYNC_FLAGS)); + } + if (reconfig_port) { + unsigned long flags; + spin_lock_irqsave(&port->card->card_lock, flags); + isicom_config_port(tty); + spin_unlock_irqrestore(&port->card->card_lock, flags); + } + mutex_unlock(&port->port.mutex); + return 0; +} + +static int isicom_get_serial_info(struct tty_struct *tty, + struct serial_struct *ss) +{ + struct isi_port *port = tty->driver_data; + + if (isicom_paranoia_check(port, tty->name, "isicom_ioctl")) + return -ENODEV; + + mutex_lock(&port->port.mutex); +/* ss->type = ? */ + ss->line = port - isi_ports; + ss->port = port->card->base; + ss->irq = port->card->irq; + ss->flags = port->port.flags; +/* ss->baud_base = ? */ + ss->close_delay = port->port.close_delay; + ss->closing_wait = port->port.closing_wait; + mutex_unlock(&port->port.mutex); + return 0; +} + +/* set_termios et all */ +static void isicom_set_termios(struct tty_struct *tty, + struct ktermios *old_termios) +{ + struct isi_port *port = tty->driver_data; + unsigned long flags; + + if (isicom_paranoia_check(port, tty->name, "isicom_set_termios")) + return; + + if (tty->termios.c_cflag == old_termios->c_cflag && + tty->termios.c_iflag == old_termios->c_iflag) + return; + + spin_lock_irqsave(&port->card->card_lock, flags); + isicom_config_port(tty); + spin_unlock_irqrestore(&port->card->card_lock, flags); + + if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty)) { + tty->hw_stopped = 0; + isicom_start(tty); + } +} + +/* throttle et all */ +static void isicom_throttle(struct tty_struct *tty) +{ + struct isi_port *port = tty->driver_data; + struct isi_board *card = port->card; + + if (isicom_paranoia_check(port, tty->name, "isicom_throttle")) + return; + + /* tell the card that this port cannot handle any more data for now */ + card->port_status &= ~(1 << port->channel); + outw(card->port_status, card->base + 0x02); +} + +/* unthrottle et all */ +static void isicom_unthrottle(struct tty_struct *tty) +{ + struct isi_port *port = tty->driver_data; + struct isi_board *card = port->card; + + if (isicom_paranoia_check(port, tty->name, "isicom_unthrottle")) + return; + + /* tell the card that this port is ready to accept more data */ + card->port_status |= (1 << port->channel); + outw(card->port_status, card->base + 0x02); +} + +/* stop et all */ +static void isicom_stop(struct tty_struct *tty) +{ + struct isi_port *port = tty->driver_data; + + if (isicom_paranoia_check(port, tty->name, "isicom_stop")) + return; + + /* this tells the transmitter not to consider this port for + data output to the card. */ + port->status &= ~ISI_TXOK; +} + +/* start et all */ +static void isicom_start(struct tty_struct *tty) +{ + struct isi_port *port = tty->driver_data; + + if (isicom_paranoia_check(port, tty->name, "isicom_start")) + return; + + /* this tells the transmitter to consider this port for + data output to the card. */ + port->status |= ISI_TXOK; +} + +static void isicom_hangup(struct tty_struct *tty) +{ + struct isi_port *port = tty->driver_data; + + if (isicom_paranoia_check(port, tty->name, "isicom_hangup")) + return; + tty_port_hangup(&port->port); +} + + +/* + * Driver init and deinit functions + */ + +static const struct tty_operations isicom_ops = { + .open = isicom_open, + .close = isicom_close, + .write = isicom_write, + .put_char = isicom_put_char, + .flush_chars = isicom_flush_chars, + .write_room = isicom_write_room, + .chars_in_buffer = isicom_chars_in_buffer, + .set_termios = isicom_set_termios, + .throttle = isicom_throttle, + .unthrottle = isicom_unthrottle, + .stop = isicom_stop, + .start = isicom_start, + .hangup = isicom_hangup, + .flush_buffer = isicom_flush_buffer, + .tiocmget = isicom_tiocmget, + .tiocmset = isicom_tiocmset, + .break_ctl = isicom_send_break, + .get_serial = isicom_get_serial_info, + .set_serial = isicom_set_serial_info, +}; + +static const struct tty_port_operations isicom_port_ops = { + .carrier_raised = isicom_carrier_raised, + .dtr_rts = isicom_dtr_rts, + .activate = isicom_activate, + .shutdown = isicom_shutdown, +}; + +static int reset_card(struct pci_dev *pdev, + const unsigned int card, unsigned int *signature) +{ + struct isi_board *board = pci_get_drvdata(pdev); + unsigned long base = board->base; + unsigned int sig, portcount = 0; + int retval = 0; + + dev_dbg(&pdev->dev, "ISILoad:Resetting Card%d at 0x%lx\n", card + 1, + base); + + inw(base + 0x8); + + msleep(10); + + outw(0, base + 0x8); /* Reset */ + + msleep(1000); + + sig = inw(base + 0x4) & 0xff; + + if (sig != 0xa5 && sig != 0xbb && sig != 0xcc && sig != 0xdd && + sig != 0xee) { + dev_warn(&pdev->dev, "ISILoad:Card%u reset failure (Possible " + "bad I/O Port Address 0x%lx).\n", card + 1, base); + dev_dbg(&pdev->dev, "Sig=0x%x\n", sig); + retval = -EIO; + goto end; + } + + msleep(10); + + portcount = inw(base + 0x2); + if (!(inw(base + 0xe) & 0x1) || (portcount != 0 && portcount != 4 && + portcount != 8 && portcount != 16)) { + dev_err(&pdev->dev, "ISILoad:PCI Card%d reset failure.\n", + card + 1); + retval = -EIO; + goto end; + } + + switch (sig) { + case 0xa5: + case 0xbb: + case 0xdd: + board->port_count = (portcount == 4) ? 4 : 8; + board->shift_count = 12; + break; + case 0xcc: + case 0xee: + board->port_count = 16; + board->shift_count = 11; + break; + } + dev_info(&pdev->dev, "-Done\n"); + *signature = sig; + +end: + return retval; +} + +static int load_firmware(struct pci_dev *pdev, + const unsigned int index, const unsigned int signature) +{ + struct isi_board *board = pci_get_drvdata(pdev); + const struct firmware *fw; + unsigned long base = board->base; + unsigned int a; + u16 word_count, status; + int retval = -EIO; + char *name; + u8 *data; + + struct stframe { + u16 addr; + u16 count; + u8 data[0]; + } *frame; + + switch (signature) { + case 0xa5: + name = "isi608.bin"; + break; + case 0xbb: + name = "isi608em.bin"; + break; + case 0xcc: + name = "isi616em.bin"; + break; + case 0xdd: + name = "isi4608.bin"; + break; + case 0xee: + name = "isi4616.bin"; + break; + default: + dev_err(&pdev->dev, "Unknown signature.\n"); + goto end; + } + + retval = request_firmware(&fw, name, &pdev->dev); + if (retval) + goto end; + + retval = -EIO; + + for (frame = (struct stframe *)fw->data; + frame < (struct stframe *)(fw->data + fw->size); + frame = (struct stframe *)((u8 *)(frame + 1) + + frame->count)) { + if (WaitTillCardIsFree(base)) + goto errrelfw; + + outw(0xf0, base); /* start upload sequence */ + outw(0x00, base); + outw(frame->addr, base); /* lsb of address */ + + word_count = frame->count / 2 + frame->count % 2; + outw(word_count, base); + InterruptTheCard(base); + + udelay(100); /* 0x2f */ + + if (WaitTillCardIsFree(base)) + goto errrelfw; + + status = inw(base + 0x4); + if (status != 0) { + dev_warn(&pdev->dev, "Card%d rejected load header:\n" + "Address:0x%x\n" + "Count:0x%x\n" + "Status:0x%x\n", + index + 1, frame->addr, frame->count, status); + goto errrelfw; + } + outsw(base, frame->data, word_count); + + InterruptTheCard(base); + + udelay(50); /* 0x0f */ + + if (WaitTillCardIsFree(base)) + goto errrelfw; + + status = inw(base + 0x4); + if (status != 0) { + dev_err(&pdev->dev, "Card%d got out of sync.Card " + "Status:0x%x\n", index + 1, status); + goto errrelfw; + } + } + +/* XXX: should we test it by reading it back and comparing with original like + * in load firmware package? */ + for (frame = (struct stframe *)fw->data; + frame < (struct stframe *)(fw->data + fw->size); + frame = (struct stframe *)((u8 *)(frame + 1) + + frame->count)) { + if (WaitTillCardIsFree(base)) + goto errrelfw; + + outw(0xf1, base); /* start download sequence */ + outw(0x00, base); + outw(frame->addr, base); /* lsb of address */ + + word_count = (frame->count >> 1) + frame->count % 2; + outw(word_count + 1, base); + InterruptTheCard(base); + + udelay(50); /* 0xf */ + + if (WaitTillCardIsFree(base)) + goto errrelfw; + + status = inw(base + 0x4); + if (status != 0) { + dev_warn(&pdev->dev, "Card%d rejected verify header:\n" + "Address:0x%x\n" + "Count:0x%x\n" + "Status: 0x%x\n", + index + 1, frame->addr, frame->count, status); + goto errrelfw; + } + + data = kmalloc_array(word_count, 2, GFP_KERNEL); + if (data == NULL) { + dev_err(&pdev->dev, "Card%d, firmware upload " + "failed, not enough memory\n", index + 1); + goto errrelfw; + } + inw(base); + insw(base, data, word_count); + InterruptTheCard(base); + + for (a = 0; a < frame->count; a++) + if (data[a] != frame->data[a]) { + kfree(data); + dev_err(&pdev->dev, "Card%d, firmware upload " + "failed\n", index + 1); + goto errrelfw; + } + kfree(data); + + udelay(50); /* 0xf */ + + if (WaitTillCardIsFree(base)) + goto errrelfw; + + status = inw(base + 0x4); + if (status != 0) { + dev_err(&pdev->dev, "Card%d verify got out of sync. " + "Card Status:0x%x\n", index + 1, status); + goto errrelfw; + } + } + + /* xfer ctrl */ + if (WaitTillCardIsFree(base)) + goto errrelfw; + + outw(0xf2, base); + outw(0x800, base); + outw(0x0, base); + outw(0x0, base); + InterruptTheCard(base); + outw(0x0, base + 0x4); /* for ISI4608 cards */ + + board->status |= FIRMWARE_LOADED; + retval = 0; + +errrelfw: + release_firmware(fw); +end: + return retval; +} + +/* + * Insmod can set static symbols so keep these static + */ +static unsigned int card_count; + +static int isicom_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + unsigned int signature, index; + int retval = -EPERM; + struct isi_board *board = NULL; + + if (card_count >= BOARD_COUNT) + goto err; + + retval = pci_enable_device(pdev); + if (retval) { + dev_err(&pdev->dev, "failed to enable\n"); + goto err; + } + + dev_info(&pdev->dev, "ISI PCI Card(Device ID 0x%x)\n", ent->device); + + /* allot the first empty slot in the array */ + for (index = 0; index < BOARD_COUNT; index++) { + if (isi_card[index].base == 0) { + board = &isi_card[index]; + break; + } + } + if (index == BOARD_COUNT) { + retval = -ENODEV; + goto err_disable; + } + + board->index = index; + board->base = pci_resource_start(pdev, 3); + board->irq = pdev->irq; + card_count++; + + pci_set_drvdata(pdev, board); + + retval = pci_request_region(pdev, 3, ISICOM_NAME); + if (retval) { + dev_err(&pdev->dev, "I/O Region 0x%lx-0x%lx is busy. Card%d " + "will be disabled.\n", board->base, board->base + 15, + index + 1); + retval = -EBUSY; + goto errdec; + } + + retval = request_irq(board->irq, isicom_interrupt, + IRQF_SHARED, ISICOM_NAME, board); + if (retval < 0) { + dev_err(&pdev->dev, "Could not install handler at Irq %d. " + "Card%d will be disabled.\n", board->irq, index + 1); + goto errunrr; + } + + retval = reset_card(pdev, index, &signature); + if (retval < 0) + goto errunri; + + retval = load_firmware(pdev, index, signature); + if (retval < 0) + goto errunri; + + for (index = 0; index < board->port_count; index++) { + struct tty_port *tport = &board->ports[index].port; + tty_port_init(tport); + tport->ops = &isicom_port_ops; + tport->close_delay = 50 * HZ/100; + tport->closing_wait = 3000 * HZ/100; + tty_port_register_device(tport, isicom_normal, + board->index * 16 + index, &pdev->dev); + } + + return 0; + +errunri: + free_irq(board->irq, board); +errunrr: + pci_release_region(pdev, 3); +errdec: + board->base = 0; + card_count--; +err_disable: + pci_disable_device(pdev); +err: + return retval; +} + +static void isicom_remove(struct pci_dev *pdev) +{ + struct isi_board *board = pci_get_drvdata(pdev); + unsigned int i; + + for (i = 0; i < board->port_count; i++) { + tty_unregister_device(isicom_normal, board->index * 16 + i); + tty_port_destroy(&board->ports[i].port); + } + + free_irq(board->irq, board); + pci_release_region(pdev, 3); + board->base = 0; + card_count--; + pci_disable_device(pdev); +} + +static int __init isicom_init(void) +{ + int retval, idx, channel; + struct isi_port *port; + + for (idx = 0; idx < BOARD_COUNT; idx++) { + port = &isi_ports[idx * 16]; + isi_card[idx].ports = port; + spin_lock_init(&isi_card[idx].card_lock); + for (channel = 0; channel < 16; channel++, port++) { + port->magic = ISICOM_MAGIC; + port->card = &isi_card[idx]; + port->channel = channel; + port->status = 0; + /* . . . */ + } + isi_card[idx].base = 0; + isi_card[idx].irq = 0; + } + + /* tty driver structure initialization */ + isicom_normal = alloc_tty_driver(PORT_COUNT); + if (!isicom_normal) { + retval = -ENOMEM; + goto error; + } + + isicom_normal->name = "ttyM"; + isicom_normal->major = ISICOM_NMAJOR; + isicom_normal->minor_start = 0; + isicom_normal->type = TTY_DRIVER_TYPE_SERIAL; + isicom_normal->subtype = SERIAL_TYPE_NORMAL; + isicom_normal->init_termios = tty_std_termios; + isicom_normal->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | + CLOCAL; + isicom_normal->flags = TTY_DRIVER_REAL_RAW | + TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_HARDWARE_BREAK; + tty_set_operations(isicom_normal, &isicom_ops); + + retval = tty_register_driver(isicom_normal); + if (retval) { + pr_debug("Couldn't register the dialin driver\n"); + goto err_puttty; + } + + retval = pci_register_driver(&isicom_driver); + if (retval < 0) { + pr_err("Unable to register pci driver.\n"); + goto err_unrtty; + } + + mod_timer(&tx, jiffies + 1); + + return 0; +err_unrtty: + tty_unregister_driver(isicom_normal); +err_puttty: + put_tty_driver(isicom_normal); +error: + return retval; +} + +static void __exit isicom_exit(void) +{ + del_timer_sync(&tx); + + pci_unregister_driver(&isicom_driver); + tty_unregister_driver(isicom_normal); + put_tty_driver(isicom_normal); +} + +module_init(isicom_init); +module_exit(isicom_exit); + +MODULE_AUTHOR("MultiTech"); +MODULE_DESCRIPTION("Driver for the ISI series of cards by MultiTech"); +MODULE_LICENSE("GPL"); +MODULE_FIRMWARE("isi608.bin"); +MODULE_FIRMWARE("isi608em.bin"); +MODULE_FIRMWARE("isi616em.bin"); +MODULE_FIRMWARE("isi4608.bin"); +MODULE_FIRMWARE("isi4616.bin"); diff --git a/drivers/tty/mips_ejtag_fdc.c b/drivers/tty/mips_ejtag_fdc.c new file mode 100644 index 000000000..a8e19b483 --- /dev/null +++ b/drivers/tty/mips_ejtag_fdc.c @@ -0,0 +1,1272 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * TTY driver for MIPS EJTAG Fast Debug Channels. + * + * Copyright (C) 2007-2015 Imagination Technologies Ltd + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +/* Register offsets */ +#define REG_FDACSR 0x00 /* FDC Access Control and Status Register */ +#define REG_FDCFG 0x08 /* FDC Configuration Register */ +#define REG_FDSTAT 0x10 /* FDC Status Register */ +#define REG_FDRX 0x18 /* FDC Receive Register */ +#define REG_FDTX(N) (0x20+0x8*(N)) /* FDC Transmit Register n (0..15) */ + +/* Register fields */ + +#define REG_FDCFG_TXINTTHRES_SHIFT 18 +#define REG_FDCFG_TXINTTHRES (0x3 << REG_FDCFG_TXINTTHRES_SHIFT) +#define REG_FDCFG_TXINTTHRES_DISABLED (0x0 << REG_FDCFG_TXINTTHRES_SHIFT) +#define REG_FDCFG_TXINTTHRES_EMPTY (0x1 << REG_FDCFG_TXINTTHRES_SHIFT) +#define REG_FDCFG_TXINTTHRES_NOTFULL (0x2 << REG_FDCFG_TXINTTHRES_SHIFT) +#define REG_FDCFG_TXINTTHRES_NEAREMPTY (0x3 << REG_FDCFG_TXINTTHRES_SHIFT) +#define REG_FDCFG_RXINTTHRES_SHIFT 16 +#define REG_FDCFG_RXINTTHRES (0x3 << REG_FDCFG_RXINTTHRES_SHIFT) +#define REG_FDCFG_RXINTTHRES_DISABLED (0x0 << REG_FDCFG_RXINTTHRES_SHIFT) +#define REG_FDCFG_RXINTTHRES_FULL (0x1 << REG_FDCFG_RXINTTHRES_SHIFT) +#define REG_FDCFG_RXINTTHRES_NOTEMPTY (0x2 << REG_FDCFG_RXINTTHRES_SHIFT) +#define REG_FDCFG_RXINTTHRES_NEARFULL (0x3 << REG_FDCFG_RXINTTHRES_SHIFT) +#define REG_FDCFG_TXFIFOSIZE_SHIFT 8 +#define REG_FDCFG_TXFIFOSIZE (0xff << REG_FDCFG_TXFIFOSIZE_SHIFT) +#define REG_FDCFG_RXFIFOSIZE_SHIFT 0 +#define REG_FDCFG_RXFIFOSIZE (0xff << REG_FDCFG_RXFIFOSIZE_SHIFT) + +#define REG_FDSTAT_TXCOUNT_SHIFT 24 +#define REG_FDSTAT_TXCOUNT (0xff << REG_FDSTAT_TXCOUNT_SHIFT) +#define REG_FDSTAT_RXCOUNT_SHIFT 16 +#define REG_FDSTAT_RXCOUNT (0xff << REG_FDSTAT_RXCOUNT_SHIFT) +#define REG_FDSTAT_RXCHAN_SHIFT 4 +#define REG_FDSTAT_RXCHAN (0xf << REG_FDSTAT_RXCHAN_SHIFT) +#define REG_FDSTAT_RXE BIT(3) /* Rx Empty */ +#define REG_FDSTAT_RXF BIT(2) /* Rx Full */ +#define REG_FDSTAT_TXE BIT(1) /* Tx Empty */ +#define REG_FDSTAT_TXF BIT(0) /* Tx Full */ + +/* Default channel for the early console */ +#define CONSOLE_CHANNEL 1 + +#define NUM_TTY_CHANNELS 16 + +#define RX_BUF_SIZE 1024 + +/* + * When the IRQ is unavailable, the FDC state must be polled for incoming data + * and space becoming available in TX FIFO. + */ +#define FDC_TTY_POLL (HZ / 50) + +struct mips_ejtag_fdc_tty; + +/** + * struct mips_ejtag_fdc_tty_port - Wrapper struct for FDC tty_port. + * @port: TTY port data + * @driver: TTY driver. + * @rx_lock: Lock for rx_buf. + * This protects between the hard interrupt and user + * context. It's also held during read SWITCH operations. + * @rx_buf: Read buffer. + * @xmit_lock: Lock for xmit_*, and port.xmit_buf. + * This protects between user context and kernel thread. + * It is used from chars_in_buffer()/write_room() TTY + * callbacks which are used during wait operations, so a + * mutex is unsuitable. + * @xmit_cnt: Size of xmit buffer contents. + * @xmit_head: Head of xmit buffer where data is written. + * @xmit_tail: Tail of xmit buffer where data is read. + * @xmit_empty: Completion for xmit buffer being empty. + */ +struct mips_ejtag_fdc_tty_port { + struct tty_port port; + struct mips_ejtag_fdc_tty *driver; + raw_spinlock_t rx_lock; + void *rx_buf; + spinlock_t xmit_lock; + unsigned int xmit_cnt; + unsigned int xmit_head; + unsigned int xmit_tail; + struct completion xmit_empty; +}; + +/** + * struct mips_ejtag_fdc_tty - Driver data for FDC as a whole. + * @dev: FDC device (for dev_*() logging). + * @driver: TTY driver. + * @cpu: CPU number for this FDC. + * @fdc_name: FDC name (not for base of channel names). + * @driver_name: Base of driver name. + * @ports: Per-channel data. + * @waitqueue: Wait queue for waiting for TX data, or for space in TX + * FIFO. + * @lock: Lock to protect FDCFG (interrupt enable). + * @thread: KThread for writing out data to FDC. + * @reg: FDC registers. + * @tx_fifo: TX FIFO size. + * @xmit_size: Size of each port's xmit buffer. + * @xmit_total: Total number of bytes (from all ports) to transmit. + * @xmit_next: Next port number to transmit from (round robin). + * @xmit_full: Indicates TX FIFO is full, we're waiting for space. + * @irq: IRQ number (negative if no IRQ). + * @removing: Indicates the device is being removed and @poll_timer + * should not be restarted. + * @poll_timer: Timer for polling for interrupt events when @irq < 0. + * @sysrq_pressed: Whether the magic sysrq key combination has been + * detected. See mips_ejtag_fdc_handle(). + */ +struct mips_ejtag_fdc_tty { + struct device *dev; + struct tty_driver *driver; + unsigned int cpu; + char fdc_name[16]; + char driver_name[16]; + struct mips_ejtag_fdc_tty_port ports[NUM_TTY_CHANNELS]; + wait_queue_head_t waitqueue; + raw_spinlock_t lock; + struct task_struct *thread; + + void __iomem *reg; + u8 tx_fifo; + + unsigned int xmit_size; + atomic_t xmit_total; + unsigned int xmit_next; + bool xmit_full; + + int irq; + bool removing; + struct timer_list poll_timer; + +#ifdef CONFIG_MAGIC_SYSRQ + bool sysrq_pressed; +#endif +}; + +/* Hardware access */ + +static inline void mips_ejtag_fdc_write(struct mips_ejtag_fdc_tty *priv, + unsigned int offs, unsigned int data) +{ + __raw_writel(data, priv->reg + offs); +} + +static inline unsigned int mips_ejtag_fdc_read(struct mips_ejtag_fdc_tty *priv, + unsigned int offs) +{ + return __raw_readl(priv->reg + offs); +} + +/* Encoding of byte stream in FDC words */ + +/** + * struct fdc_word - FDC word encoding some number of bytes of data. + * @word: Raw FDC word. + * @bytes: Number of bytes encoded by @word. + */ +struct fdc_word { + u32 word; + unsigned int bytes; +}; + +/* + * This is a compact encoding which allows every 1 byte, 2 byte, and 3 byte + * sequence to be encoded in a single word, while allowing the majority of 4 + * byte sequences (including all ASCII and common binary data) to be encoded in + * a single word too. + * _______________________ _____________ + * | FDC Word | | + * |31-24|23-16|15-8 | 7-0 | Bytes | + * |_____|_____|_____|_____|_____________| + * | | | | | | + * |0x80 |0x80 |0x80 | WW | WW | + * |0x81 |0x81 | XX | WW | WW XX | + * |0x82 | YY | XX | WW | WW XX YY | + * | ZZ | YY | XX | WW | WW XX YY ZZ | + * |_____|_____|_____|_____|_____________| + * + * Note that the 4-byte encoding can only be used where none of the other 3 + * encodings match, otherwise it must fall back to the 3 byte encoding. + */ + +/* ranges >= 1 && sizes[0] >= 1 */ +static struct fdc_word mips_ejtag_fdc_encode(const char **ptrs, + unsigned int *sizes, + unsigned int ranges) +{ + struct fdc_word word = { 0, 0 }; + const char **ptrs_end = ptrs + ranges; + + for (; ptrs < ptrs_end; ++ptrs) { + const char *ptr = *(ptrs++); + const char *end = ptr + *(sizes++); + + for (; ptr < end; ++ptr) { + word.word |= (u8)*ptr << (8*word.bytes); + ++word.bytes; + if (word.bytes == 4) + goto done; + } + } +done: + /* Choose the appropriate encoding */ + switch (word.bytes) { + case 4: + /* 4 byte encoding, but don't match the 1-3 byte encodings */ + if ((word.word >> 8) != 0x808080 && + (word.word >> 16) != 0x8181 && + (word.word >> 24) != 0x82) + break; + /* Fall back to a 3 byte encoding */ + word.bytes = 3; + word.word &= 0x00ffffff; + fallthrough; + case 3: + /* 3 byte encoding */ + word.word |= 0x82000000; + break; + case 2: + /* 2 byte encoding */ + word.word |= 0x81810000; + break; + case 1: + /* 1 byte encoding */ + word.word |= 0x80808000; + break; + } + return word; +} + +static unsigned int mips_ejtag_fdc_decode(u32 word, char *buf) +{ + buf[0] = (u8)word; + word >>= 8; + if (word == 0x808080) + return 1; + buf[1] = (u8)word; + word >>= 8; + if (word == 0x8181) + return 2; + buf[2] = (u8)word; + word >>= 8; + if (word == 0x82) + return 3; + buf[3] = (u8)word; + return 4; +} + +/* Console operations */ + +/** + * struct mips_ejtag_fdc_console - Wrapper struct for FDC consoles. + * @cons: Console object. + * @tty_drv: TTY driver associated with this console. + * @lock: Lock to protect concurrent access to other fields. + * This is raw because it may be used very early. + * @initialised: Whether the console is initialised. + * @regs: Registers base address for each CPU. + */ +struct mips_ejtag_fdc_console { + struct console cons; + struct tty_driver *tty_drv; + raw_spinlock_t lock; + bool initialised; + void __iomem *regs[NR_CPUS]; +}; + +/* Low level console write shared by early console and normal console */ +static void mips_ejtag_fdc_console_write(struct console *c, const char *s, + unsigned int count) +{ + struct mips_ejtag_fdc_console *cons = + container_of(c, struct mips_ejtag_fdc_console, cons); + void __iomem *regs; + struct fdc_word word; + unsigned long flags; + unsigned int i, buf_len, cpu; + bool done_cr = false; + char buf[4]; + const char *buf_ptr = buf; + /* Number of bytes of input data encoded up to each byte in buf */ + u8 inc[4]; + + local_irq_save(flags); + cpu = smp_processor_id(); + regs = cons->regs[cpu]; + /* First console output on this CPU? */ + if (!regs) { + regs = mips_cdmm_early_probe(0xfd); + cons->regs[cpu] = regs; + } + /* Already tried and failed to find FDC on this CPU? */ + if (IS_ERR(regs)) + goto out; + while (count) { + /* + * Copy the next few characters to a buffer so we can inject + * carriage returns before newlines. + */ + for (buf_len = 0, i = 0; buf_len < 4 && i < count; ++buf_len) { + if (s[i] == '\n' && !done_cr) { + buf[buf_len] = '\r'; + done_cr = true; + } else { + buf[buf_len] = s[i]; + done_cr = false; + ++i; + } + inc[buf_len] = i; + } + word = mips_ejtag_fdc_encode(&buf_ptr, &buf_len, 1); + count -= inc[word.bytes - 1]; + s += inc[word.bytes - 1]; + + /* Busy wait until there's space in fifo */ + while (__raw_readl(regs + REG_FDSTAT) & REG_FDSTAT_TXF) + ; + __raw_writel(word.word, regs + REG_FDTX(c->index)); + } +out: + local_irq_restore(flags); +} + +static struct tty_driver *mips_ejtag_fdc_console_device(struct console *c, + int *index) +{ + struct mips_ejtag_fdc_console *cons = + container_of(c, struct mips_ejtag_fdc_console, cons); + + *index = c->index; + return cons->tty_drv; +} + +/* Initialise an FDC console (early or normal */ +static int __init mips_ejtag_fdc_console_init(struct mips_ejtag_fdc_console *c) +{ + void __iomem *regs; + unsigned long flags; + int ret = 0; + + raw_spin_lock_irqsave(&c->lock, flags); + /* Don't init twice */ + if (c->initialised) + goto out; + /* Look for the FDC device */ + regs = mips_cdmm_early_probe(0xfd); + if (IS_ERR(regs)) { + ret = PTR_ERR(regs); + goto out; + } + + c->initialised = true; + c->regs[smp_processor_id()] = regs; + register_console(&c->cons); +out: + raw_spin_unlock_irqrestore(&c->lock, flags); + return ret; +} + +static struct mips_ejtag_fdc_console mips_ejtag_fdc_con = { + .cons = { + .name = "fdc", + .write = mips_ejtag_fdc_console_write, + .device = mips_ejtag_fdc_console_device, + .flags = CON_PRINTBUFFER, + .index = -1, + }, + .lock = __RAW_SPIN_LOCK_UNLOCKED(mips_ejtag_fdc_con.lock), +}; + +/* TTY RX/TX operations */ + +/** + * mips_ejtag_fdc_put_chan() - Write out a block of channel data. + * @priv: Pointer to driver private data. + * @chan: Channel number. + * + * Write a single block of data out to the debug adapter. If the circular buffer + * is wrapped then only the first block is written. + * + * Returns: The number of bytes that were written. + */ +static unsigned int mips_ejtag_fdc_put_chan(struct mips_ejtag_fdc_tty *priv, + unsigned int chan) +{ + struct mips_ejtag_fdc_tty_port *dport; + struct tty_struct *tty; + const char *ptrs[2]; + unsigned int sizes[2] = { 0 }; + struct fdc_word word = { .bytes = 0 }; + unsigned long flags; + + dport = &priv->ports[chan]; + spin_lock(&dport->xmit_lock); + if (dport->xmit_cnt) { + ptrs[0] = dport->port.xmit_buf + dport->xmit_tail; + sizes[0] = min_t(unsigned int, + priv->xmit_size - dport->xmit_tail, + dport->xmit_cnt); + ptrs[1] = dport->port.xmit_buf; + sizes[1] = dport->xmit_cnt - sizes[0]; + word = mips_ejtag_fdc_encode(ptrs, sizes, 1 + !!sizes[1]); + + dev_dbg(priv->dev, "%s%u: out %08x: \"%*pE%*pE\"\n", + priv->driver_name, chan, word.word, + min_t(int, word.bytes, sizes[0]), ptrs[0], + max_t(int, 0, word.bytes - sizes[0]), ptrs[1]); + + local_irq_save(flags); + /* Maybe we raced with the console and TX FIFO is full */ + if (mips_ejtag_fdc_read(priv, REG_FDSTAT) & REG_FDSTAT_TXF) + word.bytes = 0; + else + mips_ejtag_fdc_write(priv, REG_FDTX(chan), word.word); + local_irq_restore(flags); + + dport->xmit_cnt -= word.bytes; + if (!dport->xmit_cnt) { + /* Reset pointers to avoid wraps */ + dport->xmit_head = 0; + dport->xmit_tail = 0; + complete(&dport->xmit_empty); + } else { + dport->xmit_tail += word.bytes; + if (dport->xmit_tail >= priv->xmit_size) + dport->xmit_tail -= priv->xmit_size; + } + atomic_sub(word.bytes, &priv->xmit_total); + } + spin_unlock(&dport->xmit_lock); + + /* If we've made more data available, wake up tty */ + if (sizes[0] && word.bytes) { + tty = tty_port_tty_get(&dport->port); + if (tty) { + tty_wakeup(tty); + tty_kref_put(tty); + } + } + + return word.bytes; +} + +/** + * mips_ejtag_fdc_put() - Kernel thread to write out channel data to FDC. + * @arg: Driver pointer. + * + * This kernel thread runs while @priv->xmit_total != 0, and round robins the + * channels writing out blocks of buffered data to the FDC TX FIFO. + */ +static int mips_ejtag_fdc_put(void *arg) +{ + struct mips_ejtag_fdc_tty *priv = arg; + struct mips_ejtag_fdc_tty_port *dport; + unsigned int ret; + u32 cfg; + + __set_current_state(TASK_RUNNING); + while (!kthread_should_stop()) { + /* Wait for data to actually write */ + wait_event_interruptible(priv->waitqueue, + atomic_read(&priv->xmit_total) || + kthread_should_stop()); + if (kthread_should_stop()) + break; + + /* Wait for TX FIFO space to write data */ + raw_spin_lock_irq(&priv->lock); + if (mips_ejtag_fdc_read(priv, REG_FDSTAT) & REG_FDSTAT_TXF) { + priv->xmit_full = true; + if (priv->irq >= 0) { + /* Enable TX interrupt */ + cfg = mips_ejtag_fdc_read(priv, REG_FDCFG); + cfg &= ~REG_FDCFG_TXINTTHRES; + cfg |= REG_FDCFG_TXINTTHRES_NOTFULL; + mips_ejtag_fdc_write(priv, REG_FDCFG, cfg); + } + } + raw_spin_unlock_irq(&priv->lock); + wait_event_interruptible(priv->waitqueue, + !(mips_ejtag_fdc_read(priv, REG_FDSTAT) + & REG_FDSTAT_TXF) || + kthread_should_stop()); + if (kthread_should_stop()) + break; + + /* Find next channel with data to output */ + for (;;) { + dport = &priv->ports[priv->xmit_next]; + spin_lock(&dport->xmit_lock); + ret = dport->xmit_cnt; + spin_unlock(&dport->xmit_lock); + if (ret) + break; + /* Round robin */ + ++priv->xmit_next; + if (priv->xmit_next >= NUM_TTY_CHANNELS) + priv->xmit_next = 0; + } + + /* Try writing data to the chosen channel */ + ret = mips_ejtag_fdc_put_chan(priv, priv->xmit_next); + + /* + * If anything was output, move on to the next channel so as not + * to starve other channels. + */ + if (ret) { + ++priv->xmit_next; + if (priv->xmit_next >= NUM_TTY_CHANNELS) + priv->xmit_next = 0; + } + } + + return 0; +} + +/** + * mips_ejtag_fdc_handle() - Handle FDC events. + * @priv: Pointer to driver private data. + * + * Handle FDC events, such as new incoming data which needs draining out of the + * RX FIFO and feeding into the appropriate TTY ports, and space becoming + * available in the TX FIFO which would allow more data to be written out. + */ +static void mips_ejtag_fdc_handle(struct mips_ejtag_fdc_tty *priv) +{ + struct mips_ejtag_fdc_tty_port *dport; + unsigned int stat, channel, data, cfg, i, flipped; + int len; + char buf[4]; + + for (;;) { + /* Find which channel the next FDC word is destined for */ + stat = mips_ejtag_fdc_read(priv, REG_FDSTAT); + if (stat & REG_FDSTAT_RXE) + break; + channel = (stat & REG_FDSTAT_RXCHAN) >> REG_FDSTAT_RXCHAN_SHIFT; + dport = &priv->ports[channel]; + + /* Read out the FDC word, decode it, and pass to tty layer */ + raw_spin_lock(&dport->rx_lock); + data = mips_ejtag_fdc_read(priv, REG_FDRX); + + len = mips_ejtag_fdc_decode(data, buf); + dev_dbg(priv->dev, "%s%u: in %08x: \"%*pE\"\n", + priv->driver_name, channel, data, len, buf); + + flipped = 0; + for (i = 0; i < len; ++i) { +#ifdef CONFIG_MAGIC_SYSRQ +#ifdef CONFIG_MIPS_EJTAG_FDC_KGDB + /* Support just Ctrl+C with KGDB channel */ + if (channel == CONFIG_MIPS_EJTAG_FDC_KGDB_CHAN) { + if (buf[i] == '\x03') { /* ^C */ + handle_sysrq('g'); + continue; + } + } +#endif + /* Support Ctrl+O for console channel */ + if (channel == mips_ejtag_fdc_con.cons.index) { + if (buf[i] == '\x0f') { /* ^O */ + priv->sysrq_pressed = + !priv->sysrq_pressed; + if (priv->sysrq_pressed) + continue; + } else if (priv->sysrq_pressed) { + handle_sysrq(buf[i]); + priv->sysrq_pressed = false; + continue; + } + } +#endif /* CONFIG_MAGIC_SYSRQ */ + + /* Check the port isn't being shut down */ + if (!dport->rx_buf) + continue; + + flipped += tty_insert_flip_char(&dport->port, buf[i], + TTY_NORMAL); + } + if (flipped) + tty_flip_buffer_push(&dport->port); + + raw_spin_unlock(&dport->rx_lock); + } + + /* If TX FIFO no longer full we may be able to write more data */ + raw_spin_lock(&priv->lock); + if (priv->xmit_full && !(stat & REG_FDSTAT_TXF)) { + priv->xmit_full = false; + + /* Disable TX interrupt */ + cfg = mips_ejtag_fdc_read(priv, REG_FDCFG); + cfg &= ~REG_FDCFG_TXINTTHRES; + cfg |= REG_FDCFG_TXINTTHRES_DISABLED; + mips_ejtag_fdc_write(priv, REG_FDCFG, cfg); + + /* Wait the kthread so it can try writing more data */ + wake_up_interruptible(&priv->waitqueue); + } + raw_spin_unlock(&priv->lock); +} + +/** + * mips_ejtag_fdc_isr() - Interrupt handler. + * @irq: IRQ number. + * @dev_id: Pointer to driver private data. + * + * This is the interrupt handler, used when interrupts are enabled. + * + * It simply triggers the common FDC handler code. + * + * Returns: IRQ_HANDLED if an FDC interrupt was pending. + * IRQ_NONE otherwise. + */ +static irqreturn_t mips_ejtag_fdc_isr(int irq, void *dev_id) +{ + struct mips_ejtag_fdc_tty *priv = dev_id; + + /* + * We're not using proper per-cpu IRQs, so we must be careful not to + * handle IRQs on CPUs we're not interested in. + * + * Ideally proper per-cpu IRQ handlers could be used, but that doesn't + * fit well with the whole sharing of the main CPU IRQ lines. When we + * have something with a GIC that routes the FDC IRQs (i.e. no sharing + * between handlers) then support could be added more easily. + */ + if (smp_processor_id() != priv->cpu) + return IRQ_NONE; + + /* If no FDC interrupt pending, it wasn't for us */ + if (!(read_c0_cause() & CAUSEF_FDCI)) + return IRQ_NONE; + + mips_ejtag_fdc_handle(priv); + return IRQ_HANDLED; +} + +/** + * mips_ejtag_fdc_tty_timer() - Poll FDC for incoming data. + * @opaque: Pointer to driver private data. + * + * This is the timer handler for when interrupts are disabled and polling the + * FDC state is required. + * + * It simply triggers the common FDC handler code and arranges for further + * polling. + */ +static void mips_ejtag_fdc_tty_timer(struct timer_list *t) +{ + struct mips_ejtag_fdc_tty *priv = from_timer(priv, t, poll_timer); + + mips_ejtag_fdc_handle(priv); + if (!priv->removing) + mod_timer(&priv->poll_timer, jiffies + FDC_TTY_POLL); +} + +/* TTY Port operations */ + +static int mips_ejtag_fdc_tty_port_activate(struct tty_port *port, + struct tty_struct *tty) +{ + struct mips_ejtag_fdc_tty_port *dport = + container_of(port, struct mips_ejtag_fdc_tty_port, port); + void *rx_buf; + + /* Allocate the buffer we use for writing data */ + if (tty_port_alloc_xmit_buf(port) < 0) + goto err; + + /* Allocate the buffer we use for reading data */ + rx_buf = kzalloc(RX_BUF_SIZE, GFP_KERNEL); + if (!rx_buf) + goto err_free_xmit; + + raw_spin_lock_irq(&dport->rx_lock); + dport->rx_buf = rx_buf; + raw_spin_unlock_irq(&dport->rx_lock); + + return 0; +err_free_xmit: + tty_port_free_xmit_buf(port); +err: + return -ENOMEM; +} + +static void mips_ejtag_fdc_tty_port_shutdown(struct tty_port *port) +{ + struct mips_ejtag_fdc_tty_port *dport = + container_of(port, struct mips_ejtag_fdc_tty_port, port); + struct mips_ejtag_fdc_tty *priv = dport->driver; + void *rx_buf; + unsigned int count; + + spin_lock(&dport->xmit_lock); + count = dport->xmit_cnt; + spin_unlock(&dport->xmit_lock); + if (count) { + /* + * There's still data to write out, so wake and wait for the + * writer thread to drain the buffer. + */ + wake_up_interruptible(&priv->waitqueue); + wait_for_completion(&dport->xmit_empty); + } + + /* Null the read buffer (timer could still be running!) */ + raw_spin_lock_irq(&dport->rx_lock); + rx_buf = dport->rx_buf; + dport->rx_buf = NULL; + raw_spin_unlock_irq(&dport->rx_lock); + /* Free the read buffer */ + kfree(rx_buf); + + /* Free the write buffer */ + tty_port_free_xmit_buf(port); +} + +static const struct tty_port_operations mips_ejtag_fdc_tty_port_ops = { + .activate = mips_ejtag_fdc_tty_port_activate, + .shutdown = mips_ejtag_fdc_tty_port_shutdown, +}; + +/* TTY operations */ + +static int mips_ejtag_fdc_tty_install(struct tty_driver *driver, + struct tty_struct *tty) +{ + struct mips_ejtag_fdc_tty *priv = driver->driver_state; + + tty->driver_data = &priv->ports[tty->index]; + return tty_port_install(&priv->ports[tty->index].port, driver, tty); +} + +static int mips_ejtag_fdc_tty_open(struct tty_struct *tty, struct file *filp) +{ + return tty_port_open(tty->port, tty, filp); +} + +static void mips_ejtag_fdc_tty_close(struct tty_struct *tty, struct file *filp) +{ + return tty_port_close(tty->port, tty, filp); +} + +static void mips_ejtag_fdc_tty_hangup(struct tty_struct *tty) +{ + struct mips_ejtag_fdc_tty_port *dport = tty->driver_data; + struct mips_ejtag_fdc_tty *priv = dport->driver; + + /* Drop any data in the xmit buffer */ + spin_lock(&dport->xmit_lock); + if (dport->xmit_cnt) { + atomic_sub(dport->xmit_cnt, &priv->xmit_total); + dport->xmit_cnt = 0; + dport->xmit_head = 0; + dport->xmit_tail = 0; + complete(&dport->xmit_empty); + } + spin_unlock(&dport->xmit_lock); + + tty_port_hangup(tty->port); +} + +static int mips_ejtag_fdc_tty_write(struct tty_struct *tty, + const unsigned char *buf, int total) +{ + int count, block; + struct mips_ejtag_fdc_tty_port *dport = tty->driver_data; + struct mips_ejtag_fdc_tty *priv = dport->driver; + + /* + * Write to output buffer. + * + * The reason that we asynchronously write the buffer is because if we + * were to write the buffer synchronously then because the channels are + * per-CPU the buffer would be written to the channel of whatever CPU + * we're running on. + * + * What we actually want to happen is have all input and output done on + * one CPU. + */ + spin_lock(&dport->xmit_lock); + /* Work out how many bytes we can write to the xmit buffer */ + total = min(total, (int)(priv->xmit_size - dport->xmit_cnt)); + atomic_add(total, &priv->xmit_total); + dport->xmit_cnt += total; + /* Write the actual bytes (may need splitting if it wraps) */ + for (count = total; count; count -= block) { + block = min(count, (int)(priv->xmit_size - dport->xmit_head)); + memcpy(dport->port.xmit_buf + dport->xmit_head, buf, block); + dport->xmit_head += block; + if (dport->xmit_head >= priv->xmit_size) + dport->xmit_head -= priv->xmit_size; + buf += block; + } + count = dport->xmit_cnt; + /* Xmit buffer no longer empty? */ + if (count) + reinit_completion(&dport->xmit_empty); + spin_unlock(&dport->xmit_lock); + + /* Wake up the kthread */ + if (total) + wake_up_interruptible(&priv->waitqueue); + return total; +} + +static int mips_ejtag_fdc_tty_write_room(struct tty_struct *tty) +{ + struct mips_ejtag_fdc_tty_port *dport = tty->driver_data; + struct mips_ejtag_fdc_tty *priv = dport->driver; + int room; + + /* Report the space in the xmit buffer */ + spin_lock(&dport->xmit_lock); + room = priv->xmit_size - dport->xmit_cnt; + spin_unlock(&dport->xmit_lock); + + return room; +} + +static int mips_ejtag_fdc_tty_chars_in_buffer(struct tty_struct *tty) +{ + struct mips_ejtag_fdc_tty_port *dport = tty->driver_data; + int chars; + + /* Report the number of bytes in the xmit buffer */ + spin_lock(&dport->xmit_lock); + chars = dport->xmit_cnt; + spin_unlock(&dport->xmit_lock); + + return chars; +} + +static const struct tty_operations mips_ejtag_fdc_tty_ops = { + .install = mips_ejtag_fdc_tty_install, + .open = mips_ejtag_fdc_tty_open, + .close = mips_ejtag_fdc_tty_close, + .hangup = mips_ejtag_fdc_tty_hangup, + .write = mips_ejtag_fdc_tty_write, + .write_room = mips_ejtag_fdc_tty_write_room, + .chars_in_buffer = mips_ejtag_fdc_tty_chars_in_buffer, +}; + +int __weak get_c0_fdc_int(void) +{ + return -1; +} + +static int mips_ejtag_fdc_tty_probe(struct mips_cdmm_device *dev) +{ + int ret, nport; + struct mips_ejtag_fdc_tty_port *dport; + struct mips_ejtag_fdc_tty *priv; + struct tty_driver *driver; + unsigned int cfg, tx_fifo; + + priv = devm_kzalloc(&dev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + priv->cpu = dev->cpu; + priv->dev = &dev->dev; + mips_cdmm_set_drvdata(dev, priv); + atomic_set(&priv->xmit_total, 0); + raw_spin_lock_init(&priv->lock); + + priv->reg = devm_ioremap(priv->dev, dev->res.start, + resource_size(&dev->res)); + if (!priv->reg) { + dev_err(priv->dev, "ioremap failed for resource %pR\n", + &dev->res); + return -ENOMEM; + } + + cfg = mips_ejtag_fdc_read(priv, REG_FDCFG); + tx_fifo = (cfg & REG_FDCFG_TXFIFOSIZE) >> REG_FDCFG_TXFIFOSIZE_SHIFT; + /* Disable interrupts */ + cfg &= ~(REG_FDCFG_TXINTTHRES | REG_FDCFG_RXINTTHRES); + cfg |= REG_FDCFG_TXINTTHRES_DISABLED; + cfg |= REG_FDCFG_RXINTTHRES_DISABLED; + mips_ejtag_fdc_write(priv, REG_FDCFG, cfg); + + /* Make each port's xmit FIFO big enough to fill FDC TX FIFO */ + priv->xmit_size = min(tx_fifo * 4, (unsigned int)SERIAL_XMIT_SIZE); + + driver = tty_alloc_driver(NUM_TTY_CHANNELS, TTY_DRIVER_REAL_RAW); + if (IS_ERR(driver)) + return PTR_ERR(driver); + priv->driver = driver; + + driver->driver_name = "ejtag_fdc"; + snprintf(priv->fdc_name, sizeof(priv->fdc_name), "ttyFDC%u", dev->cpu); + snprintf(priv->driver_name, sizeof(priv->driver_name), "%sc", + priv->fdc_name); + driver->name = priv->driver_name; + driver->major = 0; /* Auto-allocate */ + driver->minor_start = 0; + driver->type = TTY_DRIVER_TYPE_SERIAL; + driver->subtype = SERIAL_TYPE_NORMAL; + driver->init_termios = tty_std_termios; + driver->init_termios.c_cflag |= CLOCAL; + driver->driver_state = priv; + + tty_set_operations(driver, &mips_ejtag_fdc_tty_ops); + for (nport = 0; nport < NUM_TTY_CHANNELS; nport++) { + dport = &priv->ports[nport]; + dport->driver = priv; + tty_port_init(&dport->port); + dport->port.ops = &mips_ejtag_fdc_tty_port_ops; + raw_spin_lock_init(&dport->rx_lock); + spin_lock_init(&dport->xmit_lock); + /* The xmit buffer starts empty, i.e. completely written */ + init_completion(&dport->xmit_empty); + complete(&dport->xmit_empty); + } + + /* Set up the console */ + mips_ejtag_fdc_con.regs[dev->cpu] = priv->reg; + if (dev->cpu == 0) + mips_ejtag_fdc_con.tty_drv = driver; + + init_waitqueue_head(&priv->waitqueue); + priv->thread = kthread_create(mips_ejtag_fdc_put, priv, priv->fdc_name); + if (IS_ERR(priv->thread)) { + ret = PTR_ERR(priv->thread); + dev_err(priv->dev, "Couldn't create kthread (%d)\n", ret); + goto err_destroy_ports; + } + /* + * Bind the writer thread to the right CPU so it can't migrate. + * The channels are per-CPU and we want all channel I/O to be on a + * single predictable CPU. + */ + kthread_bind(priv->thread, dev->cpu); + wake_up_process(priv->thread); + + /* Look for an FDC IRQ */ + priv->irq = get_c0_fdc_int(); + + /* Try requesting the IRQ */ + if (priv->irq >= 0) { + /* + * IRQF_SHARED, IRQF_COND_SUSPEND: The FDC IRQ may be shared with + * other local interrupts such as the timer which sets + * IRQF_TIMER (including IRQF_NO_SUSPEND). + * + * IRQF_NO_THREAD: The FDC IRQ isn't individually maskable so it + * cannot be deferred and handled by a thread on RT kernels. For + * this reason any spinlocks used from the ISR are raw. + */ + ret = devm_request_irq(priv->dev, priv->irq, mips_ejtag_fdc_isr, + IRQF_PERCPU | IRQF_SHARED | + IRQF_NO_THREAD | IRQF_COND_SUSPEND, + priv->fdc_name, priv); + if (ret) + priv->irq = -1; + } + if (priv->irq >= 0) { + /* IRQ is usable, enable RX interrupt */ + raw_spin_lock_irq(&priv->lock); + cfg = mips_ejtag_fdc_read(priv, REG_FDCFG); + cfg &= ~REG_FDCFG_RXINTTHRES; + cfg |= REG_FDCFG_RXINTTHRES_NOTEMPTY; + mips_ejtag_fdc_write(priv, REG_FDCFG, cfg); + raw_spin_unlock_irq(&priv->lock); + } else { + /* If we didn't get an usable IRQ, poll instead */ + timer_setup(&priv->poll_timer, mips_ejtag_fdc_tty_timer, + TIMER_PINNED); + priv->poll_timer.expires = jiffies + FDC_TTY_POLL; + /* + * Always attach the timer to the right CPU. The channels are + * per-CPU so all polling should be from a single CPU. + */ + add_timer_on(&priv->poll_timer, dev->cpu); + + dev_info(priv->dev, "No usable IRQ, polling enabled\n"); + } + + ret = tty_register_driver(driver); + if (ret < 0) { + dev_err(priv->dev, "Couldn't install tty driver (%d)\n", ret); + goto err_stop_irq; + } + + return 0; + +err_stop_irq: + if (priv->irq >= 0) { + raw_spin_lock_irq(&priv->lock); + cfg = mips_ejtag_fdc_read(priv, REG_FDCFG); + /* Disable interrupts */ + cfg &= ~(REG_FDCFG_TXINTTHRES | REG_FDCFG_RXINTTHRES); + cfg |= REG_FDCFG_TXINTTHRES_DISABLED; + cfg |= REG_FDCFG_RXINTTHRES_DISABLED; + mips_ejtag_fdc_write(priv, REG_FDCFG, cfg); + raw_spin_unlock_irq(&priv->lock); + } else { + priv->removing = true; + del_timer_sync(&priv->poll_timer); + } + kthread_stop(priv->thread); +err_destroy_ports: + if (dev->cpu == 0) + mips_ejtag_fdc_con.tty_drv = NULL; + for (nport = 0; nport < NUM_TTY_CHANNELS; nport++) { + dport = &priv->ports[nport]; + tty_port_destroy(&dport->port); + } + put_tty_driver(priv->driver); + return ret; +} + +static int mips_ejtag_fdc_tty_cpu_down(struct mips_cdmm_device *dev) +{ + struct mips_ejtag_fdc_tty *priv = mips_cdmm_get_drvdata(dev); + unsigned int cfg; + + if (priv->irq >= 0) { + raw_spin_lock_irq(&priv->lock); + cfg = mips_ejtag_fdc_read(priv, REG_FDCFG); + /* Disable interrupts */ + cfg &= ~(REG_FDCFG_TXINTTHRES | REG_FDCFG_RXINTTHRES); + cfg |= REG_FDCFG_TXINTTHRES_DISABLED; + cfg |= REG_FDCFG_RXINTTHRES_DISABLED; + mips_ejtag_fdc_write(priv, REG_FDCFG, cfg); + raw_spin_unlock_irq(&priv->lock); + } else { + priv->removing = true; + del_timer_sync(&priv->poll_timer); + } + kthread_stop(priv->thread); + + return 0; +} + +static int mips_ejtag_fdc_tty_cpu_up(struct mips_cdmm_device *dev) +{ + struct mips_ejtag_fdc_tty *priv = mips_cdmm_get_drvdata(dev); + unsigned int cfg; + int ret = 0; + + if (priv->irq >= 0) { + /* + * IRQ is usable, enable RX interrupt + * This must be before kthread is restarted, as kthread may + * enable TX interrupt. + */ + raw_spin_lock_irq(&priv->lock); + cfg = mips_ejtag_fdc_read(priv, REG_FDCFG); + cfg &= ~(REG_FDCFG_TXINTTHRES | REG_FDCFG_RXINTTHRES); + cfg |= REG_FDCFG_TXINTTHRES_DISABLED; + cfg |= REG_FDCFG_RXINTTHRES_NOTEMPTY; + mips_ejtag_fdc_write(priv, REG_FDCFG, cfg); + raw_spin_unlock_irq(&priv->lock); + } else { + /* Restart poll timer */ + priv->removing = false; + add_timer_on(&priv->poll_timer, dev->cpu); + } + + /* Restart the kthread */ + priv->thread = kthread_create(mips_ejtag_fdc_put, priv, priv->fdc_name); + if (IS_ERR(priv->thread)) { + ret = PTR_ERR(priv->thread); + dev_err(priv->dev, "Couldn't re-create kthread (%d)\n", ret); + goto out; + } + /* Bind it back to the right CPU and set it off */ + kthread_bind(priv->thread, dev->cpu); + wake_up_process(priv->thread); +out: + return ret; +} + +static const struct mips_cdmm_device_id mips_ejtag_fdc_tty_ids[] = { + { .type = 0xfd }, + { } +}; + +static struct mips_cdmm_driver mips_ejtag_fdc_tty_driver = { + .drv = { + .name = "mips_ejtag_fdc", + }, + .probe = mips_ejtag_fdc_tty_probe, + .cpu_down = mips_ejtag_fdc_tty_cpu_down, + .cpu_up = mips_ejtag_fdc_tty_cpu_up, + .id_table = mips_ejtag_fdc_tty_ids, +}; +builtin_mips_cdmm_driver(mips_ejtag_fdc_tty_driver); + +static int __init mips_ejtag_fdc_init_console(void) +{ + return mips_ejtag_fdc_console_init(&mips_ejtag_fdc_con); +} +console_initcall(mips_ejtag_fdc_init_console); + +#ifdef CONFIG_MIPS_EJTAG_FDC_EARLYCON +static struct mips_ejtag_fdc_console mips_ejtag_fdc_earlycon = { + .cons = { + .name = "early_fdc", + .write = mips_ejtag_fdc_console_write, + .flags = CON_PRINTBUFFER | CON_BOOT, + .index = CONSOLE_CHANNEL, + }, + .lock = __RAW_SPIN_LOCK_UNLOCKED(mips_ejtag_fdc_earlycon.lock), +}; + +int __init setup_early_fdc_console(void) +{ + return mips_ejtag_fdc_console_init(&mips_ejtag_fdc_earlycon); +} +#endif + +#ifdef CONFIG_MIPS_EJTAG_FDC_KGDB + +/* read buffer to allow decompaction */ +static unsigned int kgdbfdc_rbuflen; +static unsigned int kgdbfdc_rpos; +static char kgdbfdc_rbuf[4]; + +/* write buffer to allow compaction */ +static unsigned int kgdbfdc_wbuflen; +static char kgdbfdc_wbuf[4]; + +static void __iomem *kgdbfdc_setup(void) +{ + void __iomem *regs; + unsigned int cpu; + + /* Find address, piggy backing off console percpu regs */ + cpu = smp_processor_id(); + regs = mips_ejtag_fdc_con.regs[cpu]; + /* First console output on this CPU? */ + if (!regs) { + regs = mips_cdmm_early_probe(0xfd); + mips_ejtag_fdc_con.regs[cpu] = regs; + } + /* Already tried and failed to find FDC on this CPU? */ + if (IS_ERR(regs)) + return regs; + + return regs; +} + +/* read a character from the read buffer, filling from FDC RX FIFO */ +static int kgdbfdc_read_char(void) +{ + unsigned int stat, channel, data; + void __iomem *regs; + + /* No more data, try and read another FDC word from RX FIFO */ + if (kgdbfdc_rpos >= kgdbfdc_rbuflen) { + kgdbfdc_rpos = 0; + kgdbfdc_rbuflen = 0; + + regs = kgdbfdc_setup(); + if (IS_ERR(regs)) + return NO_POLL_CHAR; + + /* Read next word from KGDB channel */ + do { + stat = __raw_readl(regs + REG_FDSTAT); + + /* No data waiting? */ + if (stat & REG_FDSTAT_RXE) + return NO_POLL_CHAR; + + /* Read next word */ + channel = (stat & REG_FDSTAT_RXCHAN) >> + REG_FDSTAT_RXCHAN_SHIFT; + data = __raw_readl(regs + REG_FDRX); + } while (channel != CONFIG_MIPS_EJTAG_FDC_KGDB_CHAN); + + /* Decode into rbuf */ + kgdbfdc_rbuflen = mips_ejtag_fdc_decode(data, kgdbfdc_rbuf); + } + pr_devel("kgdbfdc r %c\n", kgdbfdc_rbuf[kgdbfdc_rpos]); + return kgdbfdc_rbuf[kgdbfdc_rpos++]; +} + +/* push an FDC word from write buffer to TX FIFO */ +static void kgdbfdc_push_one(void) +{ + const char *bufs[1] = { kgdbfdc_wbuf }; + struct fdc_word word; + void __iomem *regs; + unsigned int i; + + /* Construct a word from any data in buffer */ + word = mips_ejtag_fdc_encode(bufs, &kgdbfdc_wbuflen, 1); + /* Relocate any remaining data to beginnning of buffer */ + kgdbfdc_wbuflen -= word.bytes; + for (i = 0; i < kgdbfdc_wbuflen; ++i) + kgdbfdc_wbuf[i] = kgdbfdc_wbuf[i + word.bytes]; + + regs = kgdbfdc_setup(); + if (IS_ERR(regs)) + return; + + /* Busy wait until there's space in fifo */ + while (__raw_readl(regs + REG_FDSTAT) & REG_FDSTAT_TXF) + ; + __raw_writel(word.word, + regs + REG_FDTX(CONFIG_MIPS_EJTAG_FDC_KGDB_CHAN)); +} + +/* flush the whole write buffer to the TX FIFO */ +static void kgdbfdc_flush(void) +{ + while (kgdbfdc_wbuflen) + kgdbfdc_push_one(); +} + +/* write a character into the write buffer, writing out if full */ +static void kgdbfdc_write_char(u8 chr) +{ + pr_devel("kgdbfdc w %c\n", chr); + kgdbfdc_wbuf[kgdbfdc_wbuflen++] = chr; + if (kgdbfdc_wbuflen >= sizeof(kgdbfdc_wbuf)) + kgdbfdc_push_one(); +} + +static struct kgdb_io kgdbfdc_io_ops = { + .name = "kgdbfdc", + .read_char = kgdbfdc_read_char, + .write_char = kgdbfdc_write_char, + .flush = kgdbfdc_flush, +}; + +static int __init kgdbfdc_init(void) +{ + kgdb_register_io_module(&kgdbfdc_io_ops); + return 0; +} +early_initcall(kgdbfdc_init); +#endif diff --git a/drivers/tty/moxa.c b/drivers/tty/moxa.c new file mode 100644 index 000000000..d6528f3bb --- /dev/null +++ b/drivers/tty/moxa.c @@ -0,0 +1,2104 @@ +// SPDX-License-Identifier: GPL-2.0+ +/*****************************************************************************/ +/* + * moxa.c -- MOXA Intellio family multiport serial driver. + * + * Copyright (C) 1999-2000 Moxa Technologies (support@moxa.com). + * Copyright (c) 2007 Jiri Slaby + * + * This code is loosely based on the Linux serial driver, written by + * Linus Torvalds, Theodore T'so and others. + */ + +/* + * MOXA Intellio Series Driver + * for : LINUX + * date : 1999/1/7 + * version : 5.1 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "moxa.h" + +#define MOXA_VERSION "6.0k" + +#define MOXA_FW_HDRLEN 32 + +#define MOXAMAJOR 172 + +#define MAX_BOARDS 4 /* Don't change this value */ +#define MAX_PORTS_PER_BOARD 32 /* Don't change this value */ +#define MAX_PORTS (MAX_BOARDS * MAX_PORTS_PER_BOARD) + +#define MOXA_IS_320(brd) ((brd)->boardType == MOXA_BOARD_C320_ISA || \ + (brd)->boardType == MOXA_BOARD_C320_PCI) + +/* + * Define the Moxa PCI vendor and device IDs. + */ +#define MOXA_BUS_TYPE_ISA 0 +#define MOXA_BUS_TYPE_PCI 1 + +enum { + MOXA_BOARD_C218_PCI = 1, + MOXA_BOARD_C218_ISA, + MOXA_BOARD_C320_PCI, + MOXA_BOARD_C320_ISA, + MOXA_BOARD_CP204J, +}; + +static char *moxa_brdname[] = +{ + "C218 Turbo PCI series", + "C218 Turbo ISA series", + "C320 Turbo PCI series", + "C320 Turbo ISA series", + "CP-204J series", +}; + +#ifdef CONFIG_PCI +static const struct pci_device_id moxa_pcibrds[] = { + { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C218), + .driver_data = MOXA_BOARD_C218_PCI }, + { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C320), + .driver_data = MOXA_BOARD_C320_PCI }, + { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP204J), + .driver_data = MOXA_BOARD_CP204J }, + { 0 } +}; +MODULE_DEVICE_TABLE(pci, moxa_pcibrds); +#endif /* CONFIG_PCI */ + +struct moxa_port; + +static struct moxa_board_conf { + int boardType; + int numPorts; + int busType; + + unsigned int ready; + + struct moxa_port *ports; + + void __iomem *basemem; + void __iomem *intNdx; + void __iomem *intPend; + void __iomem *intTable; +} moxa_boards[MAX_BOARDS]; + +struct mxser_mstatus { + tcflag_t cflag; + int cts; + int dsr; + int ri; + int dcd; +}; + +struct moxaq_str { + int inq; + int outq; +}; + +struct moxa_port { + struct tty_port port; + struct moxa_board_conf *board; + void __iomem *tableAddr; + + int type; + int cflag; + unsigned long statusflags; + + u8 DCDState; /* Protected by the port lock */ + u8 lineCtrl; + u8 lowChkFlag; +}; + +struct mon_str { + int tick; + int rxcnt[MAX_PORTS]; + int txcnt[MAX_PORTS]; +}; + +/* statusflags */ +#define TXSTOPPED 1 +#define LOWWAIT 2 +#define EMPTYWAIT 3 + + +#define WAKEUP_CHARS 256 + +static int ttymajor = MOXAMAJOR; +static struct mon_str moxaLog; +static unsigned int moxaFuncTout = HZ / 2; +static unsigned int moxaLowWaterChk; +static DEFINE_MUTEX(moxa_openlock); +static DEFINE_SPINLOCK(moxa_lock); + +static unsigned long baseaddr[MAX_BOARDS]; +static unsigned int type[MAX_BOARDS]; +static unsigned int numports[MAX_BOARDS]; +static struct tty_port moxa_service_port; + +MODULE_AUTHOR("William Chen"); +MODULE_DESCRIPTION("MOXA Intellio Family Multiport Board Device Driver"); +MODULE_LICENSE("GPL"); +MODULE_FIRMWARE("c218tunx.cod"); +MODULE_FIRMWARE("cp204unx.cod"); +MODULE_FIRMWARE("c320tunx.cod"); + +module_param_array(type, uint, NULL, 0); +MODULE_PARM_DESC(type, "card type: C218=2, C320=4"); +module_param_hw_array(baseaddr, ulong, ioport, NULL, 0); +MODULE_PARM_DESC(baseaddr, "base address"); +module_param_array(numports, uint, NULL, 0); +MODULE_PARM_DESC(numports, "numports (ignored for C218)"); + +module_param(ttymajor, int, 0); + +/* + * static functions: + */ +static int moxa_open(struct tty_struct *, struct file *); +static void moxa_close(struct tty_struct *, struct file *); +static int moxa_write(struct tty_struct *, const unsigned char *, int); +static int moxa_write_room(struct tty_struct *); +static void moxa_flush_buffer(struct tty_struct *); +static int moxa_chars_in_buffer(struct tty_struct *); +static void moxa_set_termios(struct tty_struct *, struct ktermios *); +static void moxa_stop(struct tty_struct *); +static void moxa_start(struct tty_struct *); +static void moxa_hangup(struct tty_struct *); +static int moxa_tiocmget(struct tty_struct *tty); +static int moxa_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear); +static void moxa_poll(struct timer_list *); +static void moxa_set_tty_param(struct tty_struct *, struct ktermios *); +static void moxa_shutdown(struct tty_port *); +static int moxa_carrier_raised(struct tty_port *); +static void moxa_dtr_rts(struct tty_port *, int); +/* + * moxa board interface functions: + */ +static void MoxaPortEnable(struct moxa_port *); +static void MoxaPortDisable(struct moxa_port *); +static int MoxaPortSetTermio(struct moxa_port *, struct ktermios *, speed_t); +static int MoxaPortGetLineOut(struct moxa_port *, int *, int *); +static void MoxaPortLineCtrl(struct moxa_port *, int, int); +static void MoxaPortFlowCtrl(struct moxa_port *, int, int, int, int, int); +static int MoxaPortLineStatus(struct moxa_port *); +static void MoxaPortFlushData(struct moxa_port *, int); +static int MoxaPortWriteData(struct tty_struct *, const unsigned char *, int); +static int MoxaPortReadData(struct moxa_port *); +static int MoxaPortTxQueue(struct moxa_port *); +static int MoxaPortRxQueue(struct moxa_port *); +static int MoxaPortTxFree(struct moxa_port *); +static void MoxaPortTxDisable(struct moxa_port *); +static void MoxaPortTxEnable(struct moxa_port *); +static int moxa_get_serial_info(struct tty_struct *, struct serial_struct *); +static int moxa_set_serial_info(struct tty_struct *, struct serial_struct *); +static void MoxaSetFifo(struct moxa_port *port, int enable); + +/* + * I/O functions + */ + +static DEFINE_SPINLOCK(moxafunc_lock); + +static void moxa_wait_finish(void __iomem *ofsAddr) +{ + unsigned long end = jiffies + moxaFuncTout; + + while (readw(ofsAddr + FuncCode) != 0) + if (time_after(jiffies, end)) + return; + if (readw(ofsAddr + FuncCode) != 0) + printk_ratelimited(KERN_WARNING "moxa function expired\n"); +} + +static void moxafunc(void __iomem *ofsAddr, u16 cmd, u16 arg) +{ + unsigned long flags; + spin_lock_irqsave(&moxafunc_lock, flags); + writew(arg, ofsAddr + FuncArg); + writew(cmd, ofsAddr + FuncCode); + moxa_wait_finish(ofsAddr); + spin_unlock_irqrestore(&moxafunc_lock, flags); +} + +static int moxafuncret(void __iomem *ofsAddr, u16 cmd, u16 arg) +{ + unsigned long flags; + u16 ret; + spin_lock_irqsave(&moxafunc_lock, flags); + writew(arg, ofsAddr + FuncArg); + writew(cmd, ofsAddr + FuncCode); + moxa_wait_finish(ofsAddr); + ret = readw(ofsAddr + FuncArg); + spin_unlock_irqrestore(&moxafunc_lock, flags); + return ret; +} + +static void moxa_low_water_check(void __iomem *ofsAddr) +{ + u16 rptr, wptr, mask, len; + + if (readb(ofsAddr + FlagStat) & Xoff_state) { + rptr = readw(ofsAddr + RXrptr); + wptr = readw(ofsAddr + RXwptr); + mask = readw(ofsAddr + RX_mask); + len = (wptr - rptr) & mask; + if (len <= Low_water) + moxafunc(ofsAddr, FC_SendXon, 0); + } +} + +/* + * TTY operations + */ + +static int moxa_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct moxa_port *ch = tty->driver_data; + void __user *argp = (void __user *)arg; + int status, ret = 0; + + if (tty->index == MAX_PORTS) { + if (cmd != MOXA_GETDATACOUNT && cmd != MOXA_GET_IOQUEUE && + cmd != MOXA_GETMSTATUS) + return -EINVAL; + } else if (!ch) + return -ENODEV; + + switch (cmd) { + case MOXA_GETDATACOUNT: + moxaLog.tick = jiffies; + if (copy_to_user(argp, &moxaLog, sizeof(moxaLog))) + ret = -EFAULT; + break; + case MOXA_FLUSH_QUEUE: + MoxaPortFlushData(ch, arg); + break; + case MOXA_GET_IOQUEUE: { + struct moxaq_str __user *argm = argp; + struct moxaq_str tmp; + struct moxa_port *p; + unsigned int i, j; + + for (i = 0; i < MAX_BOARDS; i++) { + p = moxa_boards[i].ports; + for (j = 0; j < MAX_PORTS_PER_BOARD; j++, p++, argm++) { + memset(&tmp, 0, sizeof(tmp)); + spin_lock_bh(&moxa_lock); + if (moxa_boards[i].ready) { + tmp.inq = MoxaPortRxQueue(p); + tmp.outq = MoxaPortTxQueue(p); + } + spin_unlock_bh(&moxa_lock); + if (copy_to_user(argm, &tmp, sizeof(tmp))) + return -EFAULT; + } + } + break; + } case MOXA_GET_OQUEUE: + status = MoxaPortTxQueue(ch); + ret = put_user(status, (unsigned long __user *)argp); + break; + case MOXA_GET_IQUEUE: + status = MoxaPortRxQueue(ch); + ret = put_user(status, (unsigned long __user *)argp); + break; + case MOXA_GETMSTATUS: { + struct mxser_mstatus __user *argm = argp; + struct mxser_mstatus tmp; + struct moxa_port *p; + unsigned int i, j; + + for (i = 0; i < MAX_BOARDS; i++) { + p = moxa_boards[i].ports; + for (j = 0; j < MAX_PORTS_PER_BOARD; j++, p++, argm++) { + struct tty_struct *ttyp; + memset(&tmp, 0, sizeof(tmp)); + spin_lock_bh(&moxa_lock); + if (!moxa_boards[i].ready) { + spin_unlock_bh(&moxa_lock); + goto copy; + } + + status = MoxaPortLineStatus(p); + spin_unlock_bh(&moxa_lock); + + if (status & 1) + tmp.cts = 1; + if (status & 2) + tmp.dsr = 1; + if (status & 4) + tmp.dcd = 1; + + ttyp = tty_port_tty_get(&p->port); + if (!ttyp) + tmp.cflag = p->cflag; + else + tmp.cflag = ttyp->termios.c_cflag; + tty_kref_put(ttyp); +copy: + if (copy_to_user(argm, &tmp, sizeof(tmp))) + return -EFAULT; + } + } + break; + } + default: + ret = -ENOIOCTLCMD; + } + return ret; +} + +static int moxa_break_ctl(struct tty_struct *tty, int state) +{ + struct moxa_port *port = tty->driver_data; + + moxafunc(port->tableAddr, state ? FC_SendBreak : FC_StopBreak, + Magic_code); + return 0; +} + +static const struct tty_operations moxa_ops = { + .open = moxa_open, + .close = moxa_close, + .write = moxa_write, + .write_room = moxa_write_room, + .flush_buffer = moxa_flush_buffer, + .chars_in_buffer = moxa_chars_in_buffer, + .ioctl = moxa_ioctl, + .set_termios = moxa_set_termios, + .stop = moxa_stop, + .start = moxa_start, + .hangup = moxa_hangup, + .break_ctl = moxa_break_ctl, + .tiocmget = moxa_tiocmget, + .tiocmset = moxa_tiocmset, + .set_serial = moxa_set_serial_info, + .get_serial = moxa_get_serial_info, +}; + +static const struct tty_port_operations moxa_port_ops = { + .carrier_raised = moxa_carrier_raised, + .dtr_rts = moxa_dtr_rts, + .shutdown = moxa_shutdown, +}; + +static struct tty_driver *moxaDriver; +static DEFINE_TIMER(moxaTimer, moxa_poll); + +/* + * HW init + */ + +static int moxa_check_fw_model(struct moxa_board_conf *brd, u8 model) +{ + switch (brd->boardType) { + case MOXA_BOARD_C218_ISA: + case MOXA_BOARD_C218_PCI: + if (model != 1) + goto err; + break; + case MOXA_BOARD_CP204J: + if (model != 3) + goto err; + break; + default: + if (model != 2) + goto err; + break; + } + return 0; +err: + return -EINVAL; +} + +static int moxa_check_fw(const void *ptr) +{ + const __le16 *lptr = ptr; + + if (*lptr != cpu_to_le16(0x7980)) + return -EINVAL; + + return 0; +} + +static int moxa_load_bios(struct moxa_board_conf *brd, const u8 *buf, + size_t len) +{ + void __iomem *baseAddr = brd->basemem; + u16 tmp; + + writeb(HW_reset, baseAddr + Control_reg); /* reset */ + msleep(10); + memset_io(baseAddr, 0, 4096); + memcpy_toio(baseAddr, buf, len); /* download BIOS */ + writeb(0, baseAddr + Control_reg); /* restart */ + + msleep(2000); + + switch (brd->boardType) { + case MOXA_BOARD_C218_ISA: + case MOXA_BOARD_C218_PCI: + tmp = readw(baseAddr + C218_key); + if (tmp != C218_KeyCode) + goto err; + break; + case MOXA_BOARD_CP204J: + tmp = readw(baseAddr + C218_key); + if (tmp != CP204J_KeyCode) + goto err; + break; + default: + tmp = readw(baseAddr + C320_key); + if (tmp != C320_KeyCode) + goto err; + tmp = readw(baseAddr + C320_status); + if (tmp != STS_init) { + printk(KERN_ERR "MOXA: bios upload failed -- CPU/Basic " + "module not found\n"); + return -EIO; + } + break; + } + + return 0; +err: + printk(KERN_ERR "MOXA: bios upload failed -- board not found\n"); + return -EIO; +} + +static int moxa_load_320b(struct moxa_board_conf *brd, const u8 *ptr, + size_t len) +{ + void __iomem *baseAddr = brd->basemem; + + if (len < 7168) { + printk(KERN_ERR "MOXA: invalid 320 bios -- too short\n"); + return -EINVAL; + } + + writew(len - 7168 - 2, baseAddr + C320bapi_len); + writeb(1, baseAddr + Control_reg); /* Select Page 1 */ + memcpy_toio(baseAddr + DynPage_addr, ptr, 7168); + writeb(2, baseAddr + Control_reg); /* Select Page 2 */ + memcpy_toio(baseAddr + DynPage_addr, ptr + 7168, len - 7168); + + return 0; +} + +static int moxa_real_load_code(struct moxa_board_conf *brd, const void *ptr, + size_t len) +{ + void __iomem *baseAddr = brd->basemem; + const __le16 *uptr = ptr; + size_t wlen, len2, j; + unsigned long key, loadbuf, loadlen, checksum, checksum_ok; + unsigned int i, retry; + u16 usum, keycode; + + keycode = (brd->boardType == MOXA_BOARD_CP204J) ? CP204J_KeyCode : + C218_KeyCode; + + switch (brd->boardType) { + case MOXA_BOARD_CP204J: + case MOXA_BOARD_C218_ISA: + case MOXA_BOARD_C218_PCI: + key = C218_key; + loadbuf = C218_LoadBuf; + loadlen = C218DLoad_len; + checksum = C218check_sum; + checksum_ok = C218chksum_ok; + break; + default: + key = C320_key; + keycode = C320_KeyCode; + loadbuf = C320_LoadBuf; + loadlen = C320DLoad_len; + checksum = C320check_sum; + checksum_ok = C320chksum_ok; + break; + } + + usum = 0; + wlen = len >> 1; + for (i = 0; i < wlen; i++) + usum += le16_to_cpu(uptr[i]); + retry = 0; + do { + wlen = len >> 1; + j = 0; + while (wlen) { + len2 = (wlen > 2048) ? 2048 : wlen; + wlen -= len2; + memcpy_toio(baseAddr + loadbuf, ptr + j, len2 << 1); + j += len2 << 1; + + writew(len2, baseAddr + loadlen); + writew(0, baseAddr + key); + for (i = 0; i < 100; i++) { + if (readw(baseAddr + key) == keycode) + break; + msleep(10); + } + if (readw(baseAddr + key) != keycode) + return -EIO; + } + writew(0, baseAddr + loadlen); + writew(usum, baseAddr + checksum); + writew(0, baseAddr + key); + for (i = 0; i < 100; i++) { + if (readw(baseAddr + key) == keycode) + break; + msleep(10); + } + retry++; + } while ((readb(baseAddr + checksum_ok) != 1) && (retry < 3)); + if (readb(baseAddr + checksum_ok) != 1) + return -EIO; + + writew(0, baseAddr + key); + for (i = 0; i < 600; i++) { + if (readw(baseAddr + Magic_no) == Magic_code) + break; + msleep(10); + } + if (readw(baseAddr + Magic_no) != Magic_code) + return -EIO; + + if (MOXA_IS_320(brd)) { + if (brd->busType == MOXA_BUS_TYPE_PCI) { /* ASIC board */ + writew(0x3800, baseAddr + TMS320_PORT1); + writew(0x3900, baseAddr + TMS320_PORT2); + writew(28499, baseAddr + TMS320_CLOCK); + } else { + writew(0x3200, baseAddr + TMS320_PORT1); + writew(0x3400, baseAddr + TMS320_PORT2); + writew(19999, baseAddr + TMS320_CLOCK); + } + } + writew(1, baseAddr + Disable_IRQ); + writew(0, baseAddr + Magic_no); + for (i = 0; i < 500; i++) { + if (readw(baseAddr + Magic_no) == Magic_code) + break; + msleep(10); + } + if (readw(baseAddr + Magic_no) != Magic_code) + return -EIO; + + if (MOXA_IS_320(brd)) { + j = readw(baseAddr + Module_cnt); + if (j <= 0) + return -EIO; + brd->numPorts = j * 8; + writew(j, baseAddr + Module_no); + writew(0, baseAddr + Magic_no); + for (i = 0; i < 600; i++) { + if (readw(baseAddr + Magic_no) == Magic_code) + break; + msleep(10); + } + if (readw(baseAddr + Magic_no) != Magic_code) + return -EIO; + } + brd->intNdx = baseAddr + IRQindex; + brd->intPend = baseAddr + IRQpending; + brd->intTable = baseAddr + IRQtable; + + return 0; +} + +static int moxa_load_code(struct moxa_board_conf *brd, const void *ptr, + size_t len) +{ + void __iomem *ofsAddr, *baseAddr = brd->basemem; + struct moxa_port *port; + int retval, i; + + if (len % 2) { + printk(KERN_ERR "MOXA: bios length is not even\n"); + return -EINVAL; + } + + retval = moxa_real_load_code(brd, ptr, len); /* may change numPorts */ + if (retval) + return retval; + + switch (brd->boardType) { + case MOXA_BOARD_C218_ISA: + case MOXA_BOARD_C218_PCI: + case MOXA_BOARD_CP204J: + port = brd->ports; + for (i = 0; i < brd->numPorts; i++, port++) { + port->board = brd; + port->DCDState = 0; + port->tableAddr = baseAddr + Extern_table + + Extern_size * i; + ofsAddr = port->tableAddr; + writew(C218rx_mask, ofsAddr + RX_mask); + writew(C218tx_mask, ofsAddr + TX_mask); + writew(C218rx_spage + i * C218buf_pageno, ofsAddr + Page_rxb); + writew(readw(ofsAddr + Page_rxb) + C218rx_pageno, ofsAddr + EndPage_rxb); + + writew(C218tx_spage + i * C218buf_pageno, ofsAddr + Page_txb); + writew(readw(ofsAddr + Page_txb) + C218tx_pageno, ofsAddr + EndPage_txb); + + } + break; + default: + port = brd->ports; + for (i = 0; i < brd->numPorts; i++, port++) { + port->board = brd; + port->DCDState = 0; + port->tableAddr = baseAddr + Extern_table + + Extern_size * i; + ofsAddr = port->tableAddr; + switch (brd->numPorts) { + case 8: + writew(C320p8rx_mask, ofsAddr + RX_mask); + writew(C320p8tx_mask, ofsAddr + TX_mask); + writew(C320p8rx_spage + i * C320p8buf_pgno, ofsAddr + Page_rxb); + writew(readw(ofsAddr + Page_rxb) + C320p8rx_pgno, ofsAddr + EndPage_rxb); + writew(C320p8tx_spage + i * C320p8buf_pgno, ofsAddr + Page_txb); + writew(readw(ofsAddr + Page_txb) + C320p8tx_pgno, ofsAddr + EndPage_txb); + + break; + case 16: + writew(C320p16rx_mask, ofsAddr + RX_mask); + writew(C320p16tx_mask, ofsAddr + TX_mask); + writew(C320p16rx_spage + i * C320p16buf_pgno, ofsAddr + Page_rxb); + writew(readw(ofsAddr + Page_rxb) + C320p16rx_pgno, ofsAddr + EndPage_rxb); + writew(C320p16tx_spage + i * C320p16buf_pgno, ofsAddr + Page_txb); + writew(readw(ofsAddr + Page_txb) + C320p16tx_pgno, ofsAddr + EndPage_txb); + break; + + case 24: + writew(C320p24rx_mask, ofsAddr + RX_mask); + writew(C320p24tx_mask, ofsAddr + TX_mask); + writew(C320p24rx_spage + i * C320p24buf_pgno, ofsAddr + Page_rxb); + writew(readw(ofsAddr + Page_rxb) + C320p24rx_pgno, ofsAddr + EndPage_rxb); + writew(C320p24tx_spage + i * C320p24buf_pgno, ofsAddr + Page_txb); + writew(readw(ofsAddr + Page_txb), ofsAddr + EndPage_txb); + break; + case 32: + writew(C320p32rx_mask, ofsAddr + RX_mask); + writew(C320p32tx_mask, ofsAddr + TX_mask); + writew(C320p32tx_ofs, ofsAddr + Ofs_txb); + writew(C320p32rx_spage + i * C320p32buf_pgno, ofsAddr + Page_rxb); + writew(readb(ofsAddr + Page_rxb), ofsAddr + EndPage_rxb); + writew(C320p32tx_spage + i * C320p32buf_pgno, ofsAddr + Page_txb); + writew(readw(ofsAddr + Page_txb), ofsAddr + EndPage_txb); + break; + } + } + break; + } + return 0; +} + +static int moxa_load_fw(struct moxa_board_conf *brd, const struct firmware *fw) +{ + const void *ptr = fw->data; + char rsn[64]; + u16 lens[5]; + size_t len; + unsigned int a, lenp, lencnt; + int ret = -EINVAL; + struct { + __le32 magic; /* 0x34303430 */ + u8 reserved1[2]; + u8 type; /* UNIX = 3 */ + u8 model; /* C218T=1, C320T=2, CP204=3 */ + u8 reserved2[8]; + __le16 len[5]; + } const *hdr = ptr; + + BUILD_BUG_ON(ARRAY_SIZE(hdr->len) != ARRAY_SIZE(lens)); + + if (fw->size < MOXA_FW_HDRLEN) { + strcpy(rsn, "too short (even header won't fit)"); + goto err; + } + if (hdr->magic != cpu_to_le32(0x30343034)) { + sprintf(rsn, "bad magic: %.8x", le32_to_cpu(hdr->magic)); + goto err; + } + if (hdr->type != 3) { + sprintf(rsn, "not for linux, type is %u", hdr->type); + goto err; + } + if (moxa_check_fw_model(brd, hdr->model)) { + sprintf(rsn, "not for this card, model is %u", hdr->model); + goto err; + } + + len = MOXA_FW_HDRLEN; + lencnt = hdr->model == 2 ? 5 : 3; + for (a = 0; a < ARRAY_SIZE(lens); a++) { + lens[a] = le16_to_cpu(hdr->len[a]); + if (lens[a] && len + lens[a] <= fw->size && + moxa_check_fw(&fw->data[len])) + printk(KERN_WARNING "MOXA firmware: unexpected input " + "at offset %u, but going on\n", (u32)len); + if (!lens[a] && a < lencnt) { + sprintf(rsn, "too few entries in fw file"); + goto err; + } + len += lens[a]; + } + + if (len != fw->size) { + sprintf(rsn, "bad length: %u (should be %u)", (u32)fw->size, + (u32)len); + goto err; + } + + ptr += MOXA_FW_HDRLEN; + lenp = 0; /* bios */ + + strcpy(rsn, "read above"); + + ret = moxa_load_bios(brd, ptr, lens[lenp]); + if (ret) + goto err; + + /* we skip the tty section (lens[1]), since we don't need it */ + ptr += lens[lenp] + lens[lenp + 1]; + lenp += 2; /* comm */ + + if (hdr->model == 2) { + ret = moxa_load_320b(brd, ptr, lens[lenp]); + if (ret) + goto err; + /* skip another tty */ + ptr += lens[lenp] + lens[lenp + 1]; + lenp += 2; + } + + ret = moxa_load_code(brd, ptr, lens[lenp]); + if (ret) + goto err; + + return 0; +err: + printk(KERN_ERR "firmware failed to load, reason: %s\n", rsn); + return ret; +} + +static int moxa_init_board(struct moxa_board_conf *brd, struct device *dev) +{ + const struct firmware *fw; + const char *file; + struct moxa_port *p; + unsigned int i, first_idx; + int ret; + + brd->ports = kcalloc(MAX_PORTS_PER_BOARD, sizeof(*brd->ports), + GFP_KERNEL); + if (brd->ports == NULL) { + printk(KERN_ERR "cannot allocate memory for ports\n"); + ret = -ENOMEM; + goto err; + } + + for (i = 0, p = brd->ports; i < MAX_PORTS_PER_BOARD; i++, p++) { + tty_port_init(&p->port); + p->port.ops = &moxa_port_ops; + p->type = PORT_16550A; + p->cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL; + } + + switch (brd->boardType) { + case MOXA_BOARD_C218_ISA: + case MOXA_BOARD_C218_PCI: + file = "c218tunx.cod"; + break; + case MOXA_BOARD_CP204J: + file = "cp204unx.cod"; + break; + default: + file = "c320tunx.cod"; + break; + } + + ret = request_firmware(&fw, file, dev); + if (ret) { + printk(KERN_ERR "MOXA: request_firmware failed. Make sure " + "you've placed '%s' file into your firmware " + "loader directory (e.g. /lib/firmware)\n", + file); + goto err_free; + } + + ret = moxa_load_fw(brd, fw); + + release_firmware(fw); + + if (ret) + goto err_free; + + spin_lock_bh(&moxa_lock); + brd->ready = 1; + if (!timer_pending(&moxaTimer)) + mod_timer(&moxaTimer, jiffies + HZ / 50); + spin_unlock_bh(&moxa_lock); + + first_idx = (brd - moxa_boards) * MAX_PORTS_PER_BOARD; + for (i = 0; i < brd->numPorts; i++) + tty_port_register_device(&brd->ports[i].port, moxaDriver, + first_idx + i, dev); + + return 0; +err_free: + for (i = 0; i < MAX_PORTS_PER_BOARD; i++) + tty_port_destroy(&brd->ports[i].port); + kfree(brd->ports); +err: + return ret; +} + +static void moxa_board_deinit(struct moxa_board_conf *brd) +{ + unsigned int a, opened, first_idx; + + mutex_lock(&moxa_openlock); + spin_lock_bh(&moxa_lock); + brd->ready = 0; + spin_unlock_bh(&moxa_lock); + + /* pci hot-un-plug support */ + for (a = 0; a < brd->numPorts; a++) + if (tty_port_initialized(&brd->ports[a].port)) + tty_port_tty_hangup(&brd->ports[a].port, false); + + for (a = 0; a < MAX_PORTS_PER_BOARD; a++) + tty_port_destroy(&brd->ports[a].port); + + while (1) { + opened = 0; + for (a = 0; a < brd->numPorts; a++) + if (tty_port_initialized(&brd->ports[a].port)) + opened++; + mutex_unlock(&moxa_openlock); + if (!opened) + break; + msleep(50); + mutex_lock(&moxa_openlock); + } + + first_idx = (brd - moxa_boards) * MAX_PORTS_PER_BOARD; + for (a = 0; a < brd->numPorts; a++) + tty_unregister_device(moxaDriver, first_idx + a); + + iounmap(brd->basemem); + brd->basemem = NULL; + kfree(brd->ports); +} + +#ifdef CONFIG_PCI +static int moxa_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct moxa_board_conf *board; + unsigned int i; + int board_type = ent->driver_data; + int retval; + + retval = pci_enable_device(pdev); + if (retval) { + dev_err(&pdev->dev, "can't enable pci device\n"); + goto err; + } + + for (i = 0; i < MAX_BOARDS; i++) + if (moxa_boards[i].basemem == NULL) + break; + + retval = -ENODEV; + if (i >= MAX_BOARDS) { + dev_warn(&pdev->dev, "more than %u MOXA Intellio family boards " + "found. Board is ignored.\n", MAX_BOARDS); + goto err; + } + + board = &moxa_boards[i]; + + retval = pci_request_region(pdev, 2, "moxa-base"); + if (retval) { + dev_err(&pdev->dev, "can't request pci region 2\n"); + goto err; + } + + board->basemem = ioremap(pci_resource_start(pdev, 2), 0x4000); + if (board->basemem == NULL) { + dev_err(&pdev->dev, "can't remap io space 2\n"); + retval = -ENOMEM; + goto err_reg; + } + + board->boardType = board_type; + switch (board_type) { + case MOXA_BOARD_C218_ISA: + case MOXA_BOARD_C218_PCI: + board->numPorts = 8; + break; + + case MOXA_BOARD_CP204J: + board->numPorts = 4; + break; + default: + board->numPorts = 0; + break; + } + board->busType = MOXA_BUS_TYPE_PCI; + + retval = moxa_init_board(board, &pdev->dev); + if (retval) + goto err_base; + + pci_set_drvdata(pdev, board); + + dev_info(&pdev->dev, "board '%s' ready (%u ports, firmware loaded)\n", + moxa_brdname[board_type - 1], board->numPorts); + + return 0; +err_base: + iounmap(board->basemem); + board->basemem = NULL; +err_reg: + pci_release_region(pdev, 2); +err: + return retval; +} + +static void moxa_pci_remove(struct pci_dev *pdev) +{ + struct moxa_board_conf *brd = pci_get_drvdata(pdev); + + moxa_board_deinit(brd); + + pci_release_region(pdev, 2); +} + +static struct pci_driver moxa_pci_driver = { + .name = "moxa", + .id_table = moxa_pcibrds, + .probe = moxa_pci_probe, + .remove = moxa_pci_remove +}; +#endif /* CONFIG_PCI */ + +static int __init moxa_init(void) +{ + unsigned int isabrds = 0; + int retval = 0; + struct moxa_board_conf *brd = moxa_boards; + unsigned int i; + + printk(KERN_INFO "MOXA Intellio family driver version %s\n", + MOXA_VERSION); + + tty_port_init(&moxa_service_port); + + moxaDriver = tty_alloc_driver(MAX_PORTS + 1, + TTY_DRIVER_REAL_RAW | + TTY_DRIVER_DYNAMIC_DEV); + if (IS_ERR(moxaDriver)) + return PTR_ERR(moxaDriver); + + moxaDriver->name = "ttyMX"; + moxaDriver->major = ttymajor; + moxaDriver->minor_start = 0; + moxaDriver->type = TTY_DRIVER_TYPE_SERIAL; + moxaDriver->subtype = SERIAL_TYPE_NORMAL; + moxaDriver->init_termios = tty_std_termios; + moxaDriver->init_termios.c_cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL; + moxaDriver->init_termios.c_ispeed = 9600; + moxaDriver->init_termios.c_ospeed = 9600; + tty_set_operations(moxaDriver, &moxa_ops); + /* Having one more port only for ioctls is ugly */ + tty_port_link_device(&moxa_service_port, moxaDriver, MAX_PORTS); + + if (tty_register_driver(moxaDriver)) { + printk(KERN_ERR "can't register MOXA Smartio tty driver!\n"); + put_tty_driver(moxaDriver); + return -1; + } + + /* Find the boards defined from module args. */ + + for (i = 0; i < MAX_BOARDS; i++) { + if (!baseaddr[i]) + break; + if (type[i] == MOXA_BOARD_C218_ISA || + type[i] == MOXA_BOARD_C320_ISA) { + pr_debug("Moxa board %2d: %s board(baseAddr=%lx)\n", + isabrds + 1, moxa_brdname[type[i] - 1], + baseaddr[i]); + brd->boardType = type[i]; + brd->numPorts = type[i] == MOXA_BOARD_C218_ISA ? 8 : + numports[i]; + brd->busType = MOXA_BUS_TYPE_ISA; + brd->basemem = ioremap(baseaddr[i], 0x4000); + if (!brd->basemem) { + printk(KERN_ERR "MOXA: can't remap %lx\n", + baseaddr[i]); + continue; + } + if (moxa_init_board(brd, NULL)) { + iounmap(brd->basemem); + brd->basemem = NULL; + continue; + } + + printk(KERN_INFO "MOXA isa board found at 0x%.8lx and " + "ready (%u ports, firmware loaded)\n", + baseaddr[i], brd->numPorts); + + brd++; + isabrds++; + } + } + +#ifdef CONFIG_PCI + retval = pci_register_driver(&moxa_pci_driver); + if (retval) { + printk(KERN_ERR "Can't register MOXA pci driver!\n"); + if (isabrds) + retval = 0; + } +#endif + + return retval; +} + +static void __exit moxa_exit(void) +{ + unsigned int i; + +#ifdef CONFIG_PCI + pci_unregister_driver(&moxa_pci_driver); +#endif + + for (i = 0; i < MAX_BOARDS; i++) /* ISA boards */ + if (moxa_boards[i].ready) + moxa_board_deinit(&moxa_boards[i]); + + del_timer_sync(&moxaTimer); + + if (tty_unregister_driver(moxaDriver)) + printk(KERN_ERR "Couldn't unregister MOXA Intellio family " + "serial driver\n"); + put_tty_driver(moxaDriver); +} + +module_init(moxa_init); +module_exit(moxa_exit); + +static void moxa_shutdown(struct tty_port *port) +{ + struct moxa_port *ch = container_of(port, struct moxa_port, port); + MoxaPortDisable(ch); + MoxaPortFlushData(ch, 2); +} + +static int moxa_carrier_raised(struct tty_port *port) +{ + struct moxa_port *ch = container_of(port, struct moxa_port, port); + int dcd; + + spin_lock_irq(&port->lock); + dcd = ch->DCDState; + spin_unlock_irq(&port->lock); + return dcd; +} + +static void moxa_dtr_rts(struct tty_port *port, int onoff) +{ + struct moxa_port *ch = container_of(port, struct moxa_port, port); + MoxaPortLineCtrl(ch, onoff, onoff); +} + + +static int moxa_open(struct tty_struct *tty, struct file *filp) +{ + struct moxa_board_conf *brd; + struct moxa_port *ch; + int port; + + port = tty->index; + if (port == MAX_PORTS) { + return capable(CAP_SYS_ADMIN) ? 0 : -EPERM; + } + if (mutex_lock_interruptible(&moxa_openlock)) + return -ERESTARTSYS; + brd = &moxa_boards[port / MAX_PORTS_PER_BOARD]; + if (!brd->ready) { + mutex_unlock(&moxa_openlock); + return -ENODEV; + } + + if (port % MAX_PORTS_PER_BOARD >= brd->numPorts) { + mutex_unlock(&moxa_openlock); + return -ENODEV; + } + + ch = &brd->ports[port % MAX_PORTS_PER_BOARD]; + ch->port.count++; + tty->driver_data = ch; + tty_port_tty_set(&ch->port, tty); + mutex_lock(&ch->port.mutex); + if (!tty_port_initialized(&ch->port)) { + ch->statusflags = 0; + moxa_set_tty_param(tty, &tty->termios); + MoxaPortLineCtrl(ch, 1, 1); + MoxaPortEnable(ch); + MoxaSetFifo(ch, ch->type == PORT_16550A); + tty_port_set_initialized(&ch->port, 1); + } + mutex_unlock(&ch->port.mutex); + mutex_unlock(&moxa_openlock); + + return tty_port_block_til_ready(&ch->port, tty, filp); +} + +static void moxa_close(struct tty_struct *tty, struct file *filp) +{ + struct moxa_port *ch = tty->driver_data; + ch->cflag = tty->termios.c_cflag; + tty_port_close(&ch->port, tty, filp); +} + +static int moxa_write(struct tty_struct *tty, + const unsigned char *buf, int count) +{ + struct moxa_port *ch = tty->driver_data; + unsigned long flags; + int len; + + if (ch == NULL) + return 0; + + spin_lock_irqsave(&moxa_lock, flags); + len = MoxaPortWriteData(tty, buf, count); + spin_unlock_irqrestore(&moxa_lock, flags); + + set_bit(LOWWAIT, &ch->statusflags); + return len; +} + +static int moxa_write_room(struct tty_struct *tty) +{ + struct moxa_port *ch; + + if (tty->stopped) + return 0; + ch = tty->driver_data; + if (ch == NULL) + return 0; + return MoxaPortTxFree(ch); +} + +static void moxa_flush_buffer(struct tty_struct *tty) +{ + struct moxa_port *ch = tty->driver_data; + + if (ch == NULL) + return; + MoxaPortFlushData(ch, 1); + tty_wakeup(tty); +} + +static int moxa_chars_in_buffer(struct tty_struct *tty) +{ + struct moxa_port *ch = tty->driver_data; + int chars; + + chars = MoxaPortTxQueue(ch); + if (chars) + /* + * Make it possible to wakeup anything waiting for output + * in tty_ioctl.c, etc. + */ + set_bit(EMPTYWAIT, &ch->statusflags); + return chars; +} + +static int moxa_tiocmget(struct tty_struct *tty) +{ + struct moxa_port *ch = tty->driver_data; + int flag = 0, dtr, rts; + + MoxaPortGetLineOut(ch, &dtr, &rts); + if (dtr) + flag |= TIOCM_DTR; + if (rts) + flag |= TIOCM_RTS; + dtr = MoxaPortLineStatus(ch); + if (dtr & 1) + flag |= TIOCM_CTS; + if (dtr & 2) + flag |= TIOCM_DSR; + if (dtr & 4) + flag |= TIOCM_CD; + return flag; +} + +static int moxa_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct moxa_port *ch; + int dtr, rts; + + mutex_lock(&moxa_openlock); + ch = tty->driver_data; + if (!ch) { + mutex_unlock(&moxa_openlock); + return -EINVAL; + } + + MoxaPortGetLineOut(ch, &dtr, &rts); + if (set & TIOCM_RTS) + rts = 1; + if (set & TIOCM_DTR) + dtr = 1; + if (clear & TIOCM_RTS) + rts = 0; + if (clear & TIOCM_DTR) + dtr = 0; + MoxaPortLineCtrl(ch, dtr, rts); + mutex_unlock(&moxa_openlock); + return 0; +} + +static void moxa_set_termios(struct tty_struct *tty, + struct ktermios *old_termios) +{ + struct moxa_port *ch = tty->driver_data; + + if (ch == NULL) + return; + moxa_set_tty_param(tty, old_termios); + if (!(old_termios->c_cflag & CLOCAL) && C_CLOCAL(tty)) + wake_up_interruptible(&ch->port.open_wait); +} + +static void moxa_stop(struct tty_struct *tty) +{ + struct moxa_port *ch = tty->driver_data; + + if (ch == NULL) + return; + MoxaPortTxDisable(ch); + set_bit(TXSTOPPED, &ch->statusflags); +} + + +static void moxa_start(struct tty_struct *tty) +{ + struct moxa_port *ch = tty->driver_data; + + if (ch == NULL) + return; + + if (!test_bit(TXSTOPPED, &ch->statusflags)) + return; + + MoxaPortTxEnable(ch); + clear_bit(TXSTOPPED, &ch->statusflags); +} + +static void moxa_hangup(struct tty_struct *tty) +{ + struct moxa_port *ch = tty->driver_data; + tty_port_hangup(&ch->port); +} + +static void moxa_new_dcdstate(struct moxa_port *p, u8 dcd) +{ + unsigned long flags; + dcd = !!dcd; + + spin_lock_irqsave(&p->port.lock, flags); + if (dcd != p->DCDState) { + p->DCDState = dcd; + spin_unlock_irqrestore(&p->port.lock, flags); + if (!dcd) + tty_port_tty_hangup(&p->port, true); + } + else + spin_unlock_irqrestore(&p->port.lock, flags); +} + +static int moxa_poll_port(struct moxa_port *p, unsigned int handle, + u16 __iomem *ip) +{ + struct tty_struct *tty = tty_port_tty_get(&p->port); + void __iomem *ofsAddr; + unsigned int inited = tty_port_initialized(&p->port); + u16 intr; + + if (tty) { + if (test_bit(EMPTYWAIT, &p->statusflags) && + MoxaPortTxQueue(p) == 0) { + clear_bit(EMPTYWAIT, &p->statusflags); + tty_wakeup(tty); + } + if (test_bit(LOWWAIT, &p->statusflags) && !tty->stopped && + MoxaPortTxQueue(p) <= WAKEUP_CHARS) { + clear_bit(LOWWAIT, &p->statusflags); + tty_wakeup(tty); + } + + if (inited && !tty_throttled(tty) && + MoxaPortRxQueue(p) > 0) { /* RX */ + MoxaPortReadData(p); + tty_flip_buffer_push(&p->port); + } + } else { + clear_bit(EMPTYWAIT, &p->statusflags); + MoxaPortFlushData(p, 0); /* flush RX */ + } + + if (!handle) /* nothing else to do */ + goto put; + + intr = readw(ip); /* port irq status */ + if (intr == 0) + goto put; + + writew(0, ip); /* ACK port */ + ofsAddr = p->tableAddr; + if (intr & IntrTx) /* disable tx intr */ + writew(readw(ofsAddr + HostStat) & ~WakeupTx, + ofsAddr + HostStat); + + if (!inited) + goto put; + + if (tty && (intr & IntrBreak) && !I_IGNBRK(tty)) { /* BREAK */ + tty_insert_flip_char(&p->port, 0, TTY_BREAK); + tty_flip_buffer_push(&p->port); + } + + if (intr & IntrLine) + moxa_new_dcdstate(p, readb(ofsAddr + FlagStat) & DCD_state); +put: + tty_kref_put(tty); + + return 0; +} + +static void moxa_poll(struct timer_list *unused) +{ + struct moxa_board_conf *brd; + u16 __iomem *ip; + unsigned int card, port, served = 0; + + spin_lock(&moxa_lock); + for (card = 0; card < MAX_BOARDS; card++) { + brd = &moxa_boards[card]; + if (!brd->ready) + continue; + + served++; + + ip = NULL; + if (readb(brd->intPend) == 0xff) + ip = brd->intTable + readb(brd->intNdx); + + for (port = 0; port < brd->numPorts; port++) + moxa_poll_port(&brd->ports[port], !!ip, ip + port); + + if (ip) + writeb(0, brd->intPend); /* ACK */ + + if (moxaLowWaterChk) { + struct moxa_port *p = brd->ports; + for (port = 0; port < brd->numPorts; port++, p++) + if (p->lowChkFlag) { + p->lowChkFlag = 0; + moxa_low_water_check(p->tableAddr); + } + } + } + moxaLowWaterChk = 0; + + if (served) + mod_timer(&moxaTimer, jiffies + HZ / 50); + spin_unlock(&moxa_lock); +} + +/******************************************************************************/ + +static void moxa_set_tty_param(struct tty_struct *tty, struct ktermios *old_termios) +{ + register struct ktermios *ts = &tty->termios; + struct moxa_port *ch = tty->driver_data; + int rts, cts, txflow, rxflow, xany, baud; + + rts = cts = txflow = rxflow = xany = 0; + if (ts->c_cflag & CRTSCTS) + rts = cts = 1; + if (ts->c_iflag & IXON) + txflow = 1; + if (ts->c_iflag & IXOFF) + rxflow = 1; + if (ts->c_iflag & IXANY) + xany = 1; + + MoxaPortFlowCtrl(ch, rts, cts, txflow, rxflow, xany); + baud = MoxaPortSetTermio(ch, ts, tty_get_baud_rate(tty)); + if (baud == -1) + baud = tty_termios_baud_rate(old_termios); + /* Not put the baud rate into the termios data */ + tty_encode_baud_rate(tty, baud, baud); +} + +/***************************************************************************** + * Driver level functions: * + *****************************************************************************/ + +static void MoxaPortFlushData(struct moxa_port *port, int mode) +{ + void __iomem *ofsAddr; + if (mode < 0 || mode > 2) + return; + ofsAddr = port->tableAddr; + moxafunc(ofsAddr, FC_FlushQueue, mode); + if (mode != 1) { + port->lowChkFlag = 0; + moxa_low_water_check(ofsAddr); + } +} + +/* + * Moxa Port Number Description: + * + * MOXA serial driver supports up to 4 MOXA-C218/C320 boards. And, + * the port number using in MOXA driver functions will be 0 to 31 for + * first MOXA board, 32 to 63 for second, 64 to 95 for third and 96 + * to 127 for fourth. For example, if you setup three MOXA boards, + * first board is C218, second board is C320-16 and third board is + * C320-32. The port number of first board (C218 - 8 ports) is from + * 0 to 7. The port number of second board (C320 - 16 ports) is form + * 32 to 47. The port number of third board (C320 - 32 ports) is from + * 64 to 95. And those port numbers form 8 to 31, 48 to 63 and 96 to + * 127 will be invalid. + * + * + * Moxa Functions Description: + * + * Function 1: Driver initialization routine, this routine must be + * called when initialized driver. + * Syntax: + * void MoxaDriverInit(); + * + * + * Function 2: Moxa driver private IOCTL command processing. + * Syntax: + * int MoxaDriverIoctl(unsigned int cmd, unsigned long arg, int port); + * + * unsigned int cmd : IOCTL command + * unsigned long arg : IOCTL argument + * int port : port number (0 - 127) + * + * return: 0 (OK) + * -EINVAL + * -ENOIOCTLCMD + * + * + * Function 6: Enable this port to start Tx/Rx data. + * Syntax: + * void MoxaPortEnable(int port); + * int port : port number (0 - 127) + * + * + * Function 7: Disable this port + * Syntax: + * void MoxaPortDisable(int port); + * int port : port number (0 - 127) + * + * + * Function 10: Setting baud rate of this port. + * Syntax: + * speed_t MoxaPortSetBaud(int port, speed_t baud); + * int port : port number (0 - 127) + * long baud : baud rate (50 - 115200) + * + * return: 0 : this port is invalid or baud < 50 + * 50 - 115200 : the real baud rate set to the port, if + * the argument baud is large than maximun + * available baud rate, the real setting + * baud rate will be the maximun baud rate. + * + * + * Function 12: Configure the port. + * Syntax: + * int MoxaPortSetTermio(int port, struct ktermios *termio, speed_t baud); + * int port : port number (0 - 127) + * struct ktermios * termio : termio structure pointer + * speed_t baud : baud rate + * + * return: -1 : this port is invalid or termio == NULL + * 0 : setting O.K. + * + * + * Function 13: Get the DTR/RTS state of this port. + * Syntax: + * int MoxaPortGetLineOut(int port, int *dtrState, int *rtsState); + * int port : port number (0 - 127) + * int * dtrState : pointer to INT to receive the current DTR + * state. (if NULL, this function will not + * write to this address) + * int * rtsState : pointer to INT to receive the current RTS + * state. (if NULL, this function will not + * write to this address) + * + * return: -1 : this port is invalid + * 0 : O.K. + * + * + * Function 14: Setting the DTR/RTS output state of this port. + * Syntax: + * void MoxaPortLineCtrl(int port, int dtrState, int rtsState); + * int port : port number (0 - 127) + * int dtrState : DTR output state (0: off, 1: on) + * int rtsState : RTS output state (0: off, 1: on) + * + * + * Function 15: Setting the flow control of this port. + * Syntax: + * void MoxaPortFlowCtrl(int port, int rtsFlow, int ctsFlow, int rxFlow, + * int txFlow,int xany); + * int port : port number (0 - 127) + * int rtsFlow : H/W RTS flow control (0: no, 1: yes) + * int ctsFlow : H/W CTS flow control (0: no, 1: yes) + * int rxFlow : S/W Rx XON/XOFF flow control (0: no, 1: yes) + * int txFlow : S/W Tx XON/XOFF flow control (0: no, 1: yes) + * int xany : S/W XANY flow control (0: no, 1: yes) + * + * + * Function 16: Get ths line status of this port + * Syntax: + * int MoxaPortLineStatus(int port); + * int port : port number (0 - 127) + * + * return: Bit 0 - CTS state (0: off, 1: on) + * Bit 1 - DSR state (0: off, 1: on) + * Bit 2 - DCD state (0: off, 1: on) + * + * + * Function 19: Flush the Rx/Tx buffer data of this port. + * Syntax: + * void MoxaPortFlushData(int port, int mode); + * int port : port number (0 - 127) + * int mode + * 0 : flush the Rx buffer + * 1 : flush the Tx buffer + * 2 : flush the Rx and Tx buffer + * + * + * Function 20: Write data. + * Syntax: + * int MoxaPortWriteData(int port, unsigned char * buffer, int length); + * int port : port number (0 - 127) + * unsigned char * buffer : pointer to write data buffer. + * int length : write data length + * + * return: 0 - length : real write data length + * + * + * Function 21: Read data. + * Syntax: + * int MoxaPortReadData(int port, struct tty_struct *tty); + * int port : port number (0 - 127) + * struct tty_struct *tty : tty for data + * + * return: 0 - length : real read data length + * + * + * Function 24: Get the Tx buffer current queued data bytes + * Syntax: + * int MoxaPortTxQueue(int port); + * int port : port number (0 - 127) + * + * return: .. : Tx buffer current queued data bytes + * + * + * Function 25: Get the Tx buffer current free space + * Syntax: + * int MoxaPortTxFree(int port); + * int port : port number (0 - 127) + * + * return: .. : Tx buffer current free space + * + * + * Function 26: Get the Rx buffer current queued data bytes + * Syntax: + * int MoxaPortRxQueue(int port); + * int port : port number (0 - 127) + * + * return: .. : Rx buffer current queued data bytes + * + * + * Function 28: Disable port data transmission. + * Syntax: + * void MoxaPortTxDisable(int port); + * int port : port number (0 - 127) + * + * + * Function 29: Enable port data transmission. + * Syntax: + * void MoxaPortTxEnable(int port); + * int port : port number (0 - 127) + * + * + * Function 31: Get the received BREAK signal count and reset it. + * Syntax: + * int MoxaPortResetBrkCnt(int port); + * int port : port number (0 - 127) + * + * return: 0 - .. : BREAK signal count + * + * + */ + +static void MoxaPortEnable(struct moxa_port *port) +{ + void __iomem *ofsAddr; + u16 lowwater = 512; + + ofsAddr = port->tableAddr; + writew(lowwater, ofsAddr + Low_water); + if (MOXA_IS_320(port->board)) + moxafunc(ofsAddr, FC_SetBreakIrq, 0); + else + writew(readw(ofsAddr + HostStat) | WakeupBreak, + ofsAddr + HostStat); + + moxafunc(ofsAddr, FC_SetLineIrq, Magic_code); + moxafunc(ofsAddr, FC_FlushQueue, 2); + + moxafunc(ofsAddr, FC_EnableCH, Magic_code); + MoxaPortLineStatus(port); +} + +static void MoxaPortDisable(struct moxa_port *port) +{ + void __iomem *ofsAddr = port->tableAddr; + + moxafunc(ofsAddr, FC_SetFlowCtl, 0); /* disable flow control */ + moxafunc(ofsAddr, FC_ClrLineIrq, Magic_code); + writew(0, ofsAddr + HostStat); + moxafunc(ofsAddr, FC_DisableCH, Magic_code); +} + +static speed_t MoxaPortSetBaud(struct moxa_port *port, speed_t baud) +{ + void __iomem *ofsAddr = port->tableAddr; + unsigned int clock, val; + speed_t max; + + max = MOXA_IS_320(port->board) ? 460800 : 921600; + if (baud < 50) + return 0; + if (baud > max) + baud = max; + clock = 921600; + val = clock / baud; + moxafunc(ofsAddr, FC_SetBaud, val); + baud = clock / val; + return baud; +} + +static int MoxaPortSetTermio(struct moxa_port *port, struct ktermios *termio, + speed_t baud) +{ + void __iomem *ofsAddr; + tcflag_t mode = 0; + + ofsAddr = port->tableAddr; + + mode = termio->c_cflag & CSIZE; + if (mode == CS5) + mode = MX_CS5; + else if (mode == CS6) + mode = MX_CS6; + else if (mode == CS7) + mode = MX_CS7; + else if (mode == CS8) + mode = MX_CS8; + + if (termio->c_cflag & CSTOPB) { + if (mode == MX_CS5) + mode |= MX_STOP15; + else + mode |= MX_STOP2; + } else + mode |= MX_STOP1; + + if (termio->c_cflag & PARENB) { + if (termio->c_cflag & PARODD) { + if (termio->c_cflag & CMSPAR) + mode |= MX_PARMARK; + else + mode |= MX_PARODD; + } else { + if (termio->c_cflag & CMSPAR) + mode |= MX_PARSPACE; + else + mode |= MX_PAREVEN; + } + } else + mode |= MX_PARNONE; + + moxafunc(ofsAddr, FC_SetDataMode, (u16)mode); + + if (MOXA_IS_320(port->board) && baud >= 921600) + return -1; + + baud = MoxaPortSetBaud(port, baud); + + if (termio->c_iflag & (IXON | IXOFF | IXANY)) { + spin_lock_irq(&moxafunc_lock); + writeb(termio->c_cc[VSTART], ofsAddr + FuncArg); + writeb(termio->c_cc[VSTOP], ofsAddr + FuncArg1); + writeb(FC_SetXonXoff, ofsAddr + FuncCode); + moxa_wait_finish(ofsAddr); + spin_unlock_irq(&moxafunc_lock); + + } + return baud; +} + +static int MoxaPortGetLineOut(struct moxa_port *port, int *dtrState, + int *rtsState) +{ + if (dtrState) + *dtrState = !!(port->lineCtrl & DTR_ON); + if (rtsState) + *rtsState = !!(port->lineCtrl & RTS_ON); + + return 0; +} + +static void MoxaPortLineCtrl(struct moxa_port *port, int dtr, int rts) +{ + u8 mode = 0; + + if (dtr) + mode |= DTR_ON; + if (rts) + mode |= RTS_ON; + port->lineCtrl = mode; + moxafunc(port->tableAddr, FC_LineControl, mode); +} + +static void MoxaPortFlowCtrl(struct moxa_port *port, int rts, int cts, + int txflow, int rxflow, int txany) +{ + int mode = 0; + + if (rts) + mode |= RTS_FlowCtl; + if (cts) + mode |= CTS_FlowCtl; + if (txflow) + mode |= Tx_FlowCtl; + if (rxflow) + mode |= Rx_FlowCtl; + if (txany) + mode |= IXM_IXANY; + moxafunc(port->tableAddr, FC_SetFlowCtl, mode); +} + +static int MoxaPortLineStatus(struct moxa_port *port) +{ + void __iomem *ofsAddr; + int val; + + ofsAddr = port->tableAddr; + if (MOXA_IS_320(port->board)) + val = moxafuncret(ofsAddr, FC_LineStatus, 0); + else + val = readw(ofsAddr + FlagStat) >> 4; + val &= 0x0B; + if (val & 8) + val |= 4; + moxa_new_dcdstate(port, val & 8); + val &= 7; + return val; +} + +static int MoxaPortWriteData(struct tty_struct *tty, + const unsigned char *buffer, int len) +{ + struct moxa_port *port = tty->driver_data; + void __iomem *baseAddr, *ofsAddr, *ofs; + unsigned int c, total; + u16 head, tail, tx_mask, spage, epage; + u16 pageno, pageofs, bufhead; + + ofsAddr = port->tableAddr; + baseAddr = port->board->basemem; + tx_mask = readw(ofsAddr + TX_mask); + spage = readw(ofsAddr + Page_txb); + epage = readw(ofsAddr + EndPage_txb); + tail = readw(ofsAddr + TXwptr); + head = readw(ofsAddr + TXrptr); + c = (head > tail) ? (head - tail - 1) : (head - tail + tx_mask); + if (c > len) + c = len; + moxaLog.txcnt[port->port.tty->index] += c; + total = c; + if (spage == epage) { + bufhead = readw(ofsAddr + Ofs_txb); + writew(spage, baseAddr + Control_reg); + while (c > 0) { + if (head > tail) + len = head - tail - 1; + else + len = tx_mask + 1 - tail; + len = (c > len) ? len : c; + ofs = baseAddr + DynPage_addr + bufhead + tail; + memcpy_toio(ofs, buffer, len); + buffer += len; + tail = (tail + len) & tx_mask; + c -= len; + } + } else { + pageno = spage + (tail >> 13); + pageofs = tail & Page_mask; + while (c > 0) { + len = Page_size - pageofs; + if (len > c) + len = c; + writeb(pageno, baseAddr + Control_reg); + ofs = baseAddr + DynPage_addr + pageofs; + memcpy_toio(ofs, buffer, len); + buffer += len; + if (++pageno == epage) + pageno = spage; + pageofs = 0; + c -= len; + } + tail = (tail + total) & tx_mask; + } + writew(tail, ofsAddr + TXwptr); + writeb(1, ofsAddr + CD180TXirq); /* start to send */ + return total; +} + +static int MoxaPortReadData(struct moxa_port *port) +{ + struct tty_struct *tty = port->port.tty; + unsigned char *dst; + void __iomem *baseAddr, *ofsAddr, *ofs; + unsigned int count, len, total; + u16 tail, rx_mask, spage, epage; + u16 pageno, pageofs, bufhead, head; + + ofsAddr = port->tableAddr; + baseAddr = port->board->basemem; + head = readw(ofsAddr + RXrptr); + tail = readw(ofsAddr + RXwptr); + rx_mask = readw(ofsAddr + RX_mask); + spage = readw(ofsAddr + Page_rxb); + epage = readw(ofsAddr + EndPage_rxb); + count = (tail >= head) ? (tail - head) : (tail - head + rx_mask + 1); + if (count == 0) + return 0; + + total = count; + moxaLog.rxcnt[tty->index] += total; + if (spage == epage) { + bufhead = readw(ofsAddr + Ofs_rxb); + writew(spage, baseAddr + Control_reg); + while (count > 0) { + ofs = baseAddr + DynPage_addr + bufhead + head; + len = (tail >= head) ? (tail - head) : + (rx_mask + 1 - head); + len = tty_prepare_flip_string(&port->port, &dst, + min(len, count)); + memcpy_fromio(dst, ofs, len); + head = (head + len) & rx_mask; + count -= len; + } + } else { + pageno = spage + (head >> 13); + pageofs = head & Page_mask; + while (count > 0) { + writew(pageno, baseAddr + Control_reg); + ofs = baseAddr + DynPage_addr + pageofs; + len = tty_prepare_flip_string(&port->port, &dst, + min(Page_size - pageofs, count)); + memcpy_fromio(dst, ofs, len); + + count -= len; + pageofs = (pageofs + len) & Page_mask; + if (pageofs == 0 && ++pageno == epage) + pageno = spage; + } + head = (head + total) & rx_mask; + } + writew(head, ofsAddr + RXrptr); + if (readb(ofsAddr + FlagStat) & Xoff_state) { + moxaLowWaterChk = 1; + port->lowChkFlag = 1; + } + return total; +} + + +static int MoxaPortTxQueue(struct moxa_port *port) +{ + void __iomem *ofsAddr = port->tableAddr; + u16 rptr, wptr, mask; + + rptr = readw(ofsAddr + TXrptr); + wptr = readw(ofsAddr + TXwptr); + mask = readw(ofsAddr + TX_mask); + return (wptr - rptr) & mask; +} + +static int MoxaPortTxFree(struct moxa_port *port) +{ + void __iomem *ofsAddr = port->tableAddr; + u16 rptr, wptr, mask; + + rptr = readw(ofsAddr + TXrptr); + wptr = readw(ofsAddr + TXwptr); + mask = readw(ofsAddr + TX_mask); + return mask - ((wptr - rptr) & mask); +} + +static int MoxaPortRxQueue(struct moxa_port *port) +{ + void __iomem *ofsAddr = port->tableAddr; + u16 rptr, wptr, mask; + + rptr = readw(ofsAddr + RXrptr); + wptr = readw(ofsAddr + RXwptr); + mask = readw(ofsAddr + RX_mask); + return (wptr - rptr) & mask; +} + +static void MoxaPortTxDisable(struct moxa_port *port) +{ + moxafunc(port->tableAddr, FC_SetXoffState, Magic_code); +} + +static void MoxaPortTxEnable(struct moxa_port *port) +{ + moxafunc(port->tableAddr, FC_SetXonState, Magic_code); +} + +static int moxa_get_serial_info(struct tty_struct *tty, + struct serial_struct *ss) +{ + struct moxa_port *info = tty->driver_data; + + if (tty->index == MAX_PORTS) + return -EINVAL; + if (!info) + return -ENODEV; + mutex_lock(&info->port.mutex); + ss->type = info->type, + ss->line = info->port.tty->index, + ss->flags = info->port.flags, + ss->baud_base = 921600, + ss->close_delay = jiffies_to_msecs(info->port.close_delay) / 10; + mutex_unlock(&info->port.mutex); + return 0; +} + + +static int moxa_set_serial_info(struct tty_struct *tty, + struct serial_struct *ss) +{ + struct moxa_port *info = tty->driver_data; + unsigned int close_delay; + + if (tty->index == MAX_PORTS) + return -EINVAL; + if (!info) + return -ENODEV; + + if (ss->irq != 0 || ss->port != 0 || + ss->custom_divisor != 0 || + ss->baud_base != 921600) + return -EPERM; + + close_delay = msecs_to_jiffies(ss->close_delay * 10); + + mutex_lock(&info->port.mutex); + if (!capable(CAP_SYS_ADMIN)) { + if (close_delay != info->port.close_delay || + ss->type != info->type || + ((ss->flags & ~ASYNC_USR_MASK) != + (info->port.flags & ~ASYNC_USR_MASK))) { + mutex_unlock(&info->port.mutex); + return -EPERM; + } + } else { + info->port.close_delay = close_delay; + + MoxaSetFifo(info, ss->type == PORT_16550A); + + info->type = ss->type; + } + mutex_unlock(&info->port.mutex); + return 0; +} + + + +/***************************************************************************** + * Static local functions: * + *****************************************************************************/ + +static void MoxaSetFifo(struct moxa_port *port, int enable) +{ + void __iomem *ofsAddr = port->tableAddr; + + if (!enable) { + moxafunc(ofsAddr, FC_SetRxFIFOTrig, 0); + moxafunc(ofsAddr, FC_SetTxFIFOCnt, 1); + } else { + moxafunc(ofsAddr, FC_SetRxFIFOTrig, 3); + moxafunc(ofsAddr, FC_SetTxFIFOCnt, 16); + } +} diff --git a/drivers/tty/moxa.h b/drivers/tty/moxa.h new file mode 100644 index 000000000..f0a4381b6 --- /dev/null +++ b/drivers/tty/moxa.h @@ -0,0 +1,307 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef MOXA_H_FILE +#define MOXA_H_FILE + +#define MOXA 0x400 +#define MOXA_GET_IQUEUE (MOXA + 1) /* get input buffered count */ +#define MOXA_GET_OQUEUE (MOXA + 2) /* get output buffered count */ +#define MOXA_GETDATACOUNT (MOXA + 23) +#define MOXA_GET_IOQUEUE (MOXA + 27) +#define MOXA_FLUSH_QUEUE (MOXA + 28) +#define MOXA_GETMSTATUS (MOXA + 65) + +/* + * System Configuration + */ + +#define Magic_code 0x404 + +/* + * for C218 BIOS initialization + */ +#define C218_ConfBase 0x800 +#define C218_status (C218_ConfBase + 0) /* BIOS running status */ +#define C218_diag (C218_ConfBase + 2) /* diagnostic status */ +#define C218_key (C218_ConfBase + 4) /* WORD (0x218 for C218) */ +#define C218DLoad_len (C218_ConfBase + 6) /* WORD */ +#define C218check_sum (C218_ConfBase + 8) /* BYTE */ +#define C218chksum_ok (C218_ConfBase + 0x0a) /* BYTE (1:ok) */ +#define C218_TestRx (C218_ConfBase + 0x10) /* 8 bytes for 8 ports */ +#define C218_TestTx (C218_ConfBase + 0x18) /* 8 bytes for 8 ports */ +#define C218_RXerr (C218_ConfBase + 0x20) /* 8 bytes for 8 ports */ +#define C218_ErrFlag (C218_ConfBase + 0x28) /* 8 bytes for 8 ports */ + +#define C218_LoadBuf 0x0F00 +#define C218_KeyCode 0x218 +#define CP204J_KeyCode 0x204 + +/* + * for C320 BIOS initialization + */ +#define C320_ConfBase 0x800 +#define C320_LoadBuf 0x0f00 +#define STS_init 0x05 /* for C320_status */ + +#define C320_status C320_ConfBase + 0 /* BIOS running status */ +#define C320_diag C320_ConfBase + 2 /* diagnostic status */ +#define C320_key C320_ConfBase + 4 /* WORD (0320H for C320) */ +#define C320DLoad_len C320_ConfBase + 6 /* WORD */ +#define C320check_sum C320_ConfBase + 8 /* WORD */ +#define C320chksum_ok C320_ConfBase + 0x0a /* WORD (1:ok) */ +#define C320bapi_len C320_ConfBase + 0x0c /* WORD */ +#define C320UART_no C320_ConfBase + 0x0e /* WORD */ + +#define C320_KeyCode 0x320 + +#define FixPage_addr 0x0000 /* starting addr of static page */ +#define DynPage_addr 0x2000 /* starting addr of dynamic page */ +#define C218_start 0x3000 /* starting addr of C218 BIOS prg */ +#define Control_reg 0x1ff0 /* select page and reset control */ +#define HW_reset 0x80 + +/* + * Function Codes + */ +#define FC_CardReset 0x80 +#define FC_ChannelReset 1 /* C320 firmware not supported */ +#define FC_EnableCH 2 +#define FC_DisableCH 3 +#define FC_SetParam 4 +#define FC_SetMode 5 +#define FC_SetRate 6 +#define FC_LineControl 7 +#define FC_LineStatus 8 +#define FC_XmitControl 9 +#define FC_FlushQueue 10 +#define FC_SendBreak 11 +#define FC_StopBreak 12 +#define FC_LoopbackON 13 +#define FC_LoopbackOFF 14 +#define FC_ClrIrqTable 15 +#define FC_SendXon 16 +#define FC_SetTermIrq 17 /* C320 firmware not supported */ +#define FC_SetCntIrq 18 /* C320 firmware not supported */ +#define FC_SetBreakIrq 19 +#define FC_SetLineIrq 20 +#define FC_SetFlowCtl 21 +#define FC_GenIrq 22 +#define FC_InCD180 23 +#define FC_OutCD180 24 +#define FC_InUARTreg 23 +#define FC_OutUARTreg 24 +#define FC_SetXonXoff 25 +#define FC_OutCD180CCR 26 +#define FC_ExtIQueue 27 +#define FC_ExtOQueue 28 +#define FC_ClrLineIrq 29 +#define FC_HWFlowCtl 30 +#define FC_GetClockRate 35 +#define FC_SetBaud 36 +#define FC_SetDataMode 41 +#define FC_GetCCSR 43 +#define FC_GetDataError 45 +#define FC_RxControl 50 +#define FC_ImmSend 51 +#define FC_SetXonState 52 +#define FC_SetXoffState 53 +#define FC_SetRxFIFOTrig 54 +#define FC_SetTxFIFOCnt 55 +#define FC_UnixRate 56 +#define FC_UnixResetTimer 57 + +#define RxFIFOTrig1 0 +#define RxFIFOTrig4 1 +#define RxFIFOTrig8 2 +#define RxFIFOTrig14 3 + +/* + * Dual-Ported RAM + */ +#define DRAM_global 0 +#define INT_data (DRAM_global + 0) +#define Config_base (DRAM_global + 0x108) + +#define IRQindex (INT_data + 0) +#define IRQpending (INT_data + 4) +#define IRQtable (INT_data + 8) + +/* + * Interrupt Status + */ +#define IntrRx 0x01 /* receiver data O.K. */ +#define IntrTx 0x02 /* transmit buffer empty */ +#define IntrFunc 0x04 /* function complete */ +#define IntrBreak 0x08 /* received break */ +#define IntrLine 0x10 /* line status change + for transmitter */ +#define IntrIntr 0x20 /* received INTR code */ +#define IntrQuit 0x40 /* received QUIT code */ +#define IntrEOF 0x80 /* received EOF code */ + +#define IntrRxTrigger 0x100 /* rx data count reach trigger value */ +#define IntrTxTrigger 0x200 /* tx data count below trigger value */ + +#define Magic_no (Config_base + 0) +#define Card_model_no (Config_base + 2) +#define Total_ports (Config_base + 4) +#define Module_cnt (Config_base + 8) +#define Module_no (Config_base + 10) +#define Timer_10ms (Config_base + 14) +#define Disable_IRQ (Config_base + 20) +#define TMS320_PORT1 (Config_base + 22) +#define TMS320_PORT2 (Config_base + 24) +#define TMS320_CLOCK (Config_base + 26) + +/* + * DATA BUFFER in DRAM + */ +#define Extern_table 0x400 /* Base address of the external table + (24 words * 64) total 3K bytes + (24 words * 128) total 6K bytes */ +#define Extern_size 0x60 /* 96 bytes */ +#define RXrptr 0x00 /* read pointer for RX buffer */ +#define RXwptr 0x02 /* write pointer for RX buffer */ +#define TXrptr 0x04 /* read pointer for TX buffer */ +#define TXwptr 0x06 /* write pointer for TX buffer */ +#define HostStat 0x08 /* IRQ flag and general flag */ +#define FlagStat 0x0A +#define FlowControl 0x0C /* B7 B6 B5 B4 B3 B2 B1 B0 */ + /* x x x x | | | | */ + /* | | | + CTS flow */ + /* | | +--- RTS flow */ + /* | +------ TX Xon/Xoff */ + /* +--------- RX Xon/Xoff */ +#define Break_cnt 0x0E /* received break count */ +#define CD180TXirq 0x10 /* if non-0: enable TX irq */ +#define RX_mask 0x12 +#define TX_mask 0x14 +#define Ofs_rxb 0x16 +#define Ofs_txb 0x18 +#define Page_rxb 0x1A +#define Page_txb 0x1C +#define EndPage_rxb 0x1E +#define EndPage_txb 0x20 +#define Data_error 0x22 +#define RxTrigger 0x28 +#define TxTrigger 0x2a + +#define rRXwptr 0x34 +#define Low_water 0x36 + +#define FuncCode 0x40 +#define FuncArg 0x42 +#define FuncArg1 0x44 + +#define C218rx_size 0x2000 /* 8K bytes */ +#define C218tx_size 0x8000 /* 32K bytes */ + +#define C218rx_mask (C218rx_size - 1) +#define C218tx_mask (C218tx_size - 1) + +#define C320p8rx_size 0x2000 +#define C320p8tx_size 0x8000 +#define C320p8rx_mask (C320p8rx_size - 1) +#define C320p8tx_mask (C320p8tx_size - 1) + +#define C320p16rx_size 0x2000 +#define C320p16tx_size 0x4000 +#define C320p16rx_mask (C320p16rx_size - 1) +#define C320p16tx_mask (C320p16tx_size - 1) + +#define C320p24rx_size 0x2000 +#define C320p24tx_size 0x2000 +#define C320p24rx_mask (C320p24rx_size - 1) +#define C320p24tx_mask (C320p24tx_size - 1) + +#define C320p32rx_size 0x1000 +#define C320p32tx_size 0x1000 +#define C320p32rx_mask (C320p32rx_size - 1) +#define C320p32tx_mask (C320p32tx_size - 1) + +#define Page_size 0x2000U +#define Page_mask (Page_size - 1) +#define C218rx_spage 3 +#define C218tx_spage 4 +#define C218rx_pageno 1 +#define C218tx_pageno 4 +#define C218buf_pageno 5 + +#define C320p8rx_spage 3 +#define C320p8tx_spage 4 +#define C320p8rx_pgno 1 +#define C320p8tx_pgno 4 +#define C320p8buf_pgno 5 + +#define C320p16rx_spage 3 +#define C320p16tx_spage 4 +#define C320p16rx_pgno 1 +#define C320p16tx_pgno 2 +#define C320p16buf_pgno 3 + +#define C320p24rx_spage 3 +#define C320p24tx_spage 4 +#define C320p24rx_pgno 1 +#define C320p24tx_pgno 1 +#define C320p24buf_pgno 2 + +#define C320p32rx_spage 3 +#define C320p32tx_ofs C320p32rx_size +#define C320p32tx_spage 3 +#define C320p32buf_pgno 1 + +/* + * Host Status + */ +#define WakeupRx 0x01 +#define WakeupTx 0x02 +#define WakeupBreak 0x08 +#define WakeupLine 0x10 +#define WakeupIntr 0x20 +#define WakeupQuit 0x40 +#define WakeupEOF 0x80 /* used in VTIME control */ +#define WakeupRxTrigger 0x100 +#define WakeupTxTrigger 0x200 +/* + * Flag status + */ +#define Rx_over 0x01 +#define Xoff_state 0x02 +#define Tx_flowOff 0x04 +#define Tx_enable 0x08 +#define CTS_state 0x10 +#define DSR_state 0x20 +#define DCD_state 0x80 +/* + * FlowControl + */ +#define CTS_FlowCtl 1 +#define RTS_FlowCtl 2 +#define Tx_FlowCtl 4 +#define Rx_FlowCtl 8 +#define IXM_IXANY 0x10 + +#define LowWater 128 + +#define DTR_ON 1 +#define RTS_ON 2 +#define CTS_ON 1 +#define DSR_ON 2 +#define DCD_ON 8 + +/* mode definition */ +#define MX_CS8 0x03 +#define MX_CS7 0x02 +#define MX_CS6 0x01 +#define MX_CS5 0x00 + +#define MX_STOP1 0x00 +#define MX_STOP15 0x04 +#define MX_STOP2 0x08 + +#define MX_PARNONE 0x00 +#define MX_PAREVEN 0x40 +#define MX_PARODD 0xC0 +#define MX_PARMARK 0xA0 +#define MX_PARSPACE 0x20 + +#endif diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c new file mode 100644 index 000000000..8344265a1 --- /dev/null +++ b/drivers/tty/mxser.c @@ -0,0 +1,2815 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * mxser.c -- MOXA Smartio/Industio family multiport serial driver. + * + * Copyright (C) 1999-2006 Moxa Technologies (support@moxa.com). + * Copyright (C) 2006-2008 Jiri Slaby + * + * This code is loosely based on the 1.8 moxa driver which is based on + * Linux serial driver, written by Linus Torvalds, Theodore T'so and + * others. + * + * Fed through a cleanup, indent and remove of non 2.6 code by Alan Cox + * . The original 1.8 code is available on + * www.moxa.com. + * - Fixed x86_64 cleanness + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "mxser.h" + +#define MXSER_VERSION "2.0.5" /* 1.14 */ +#define MXSERMAJOR 174 + +#define MXSER_BOARDS 4 /* Max. boards */ +#define MXSER_PORTS_PER_BOARD 8 /* Max. ports per board */ +#define MXSER_PORTS (MXSER_BOARDS * MXSER_PORTS_PER_BOARD) +#define MXSER_ISR_PASS_LIMIT 100 + +/*CheckIsMoxaMust return value*/ +#define MOXA_OTHER_UART 0x00 +#define MOXA_MUST_MU150_HWID 0x01 +#define MOXA_MUST_MU860_HWID 0x02 + +#define WAKEUP_CHARS 256 + +#define UART_MCR_AFE 0x20 +#define UART_LSR_SPECIAL 0x1E + +#define PCI_DEVICE_ID_POS104UL 0x1044 +#define PCI_DEVICE_ID_CB108 0x1080 +#define PCI_DEVICE_ID_CP102UF 0x1023 +#define PCI_DEVICE_ID_CP112UL 0x1120 +#define PCI_DEVICE_ID_CB114 0x1142 +#define PCI_DEVICE_ID_CP114UL 0x1143 +#define PCI_DEVICE_ID_CB134I 0x1341 +#define PCI_DEVICE_ID_CP138U 0x1380 + + +#define C168_ASIC_ID 1 +#define C104_ASIC_ID 2 +#define C102_ASIC_ID 0xB +#define CI132_ASIC_ID 4 +#define CI134_ASIC_ID 3 +#define CI104J_ASIC_ID 5 + +#define MXSER_HIGHBAUD 1 +#define MXSER_HAS2 2 + +/* This is only for PCI */ +static const struct { + int type; + int tx_fifo; + int rx_fifo; + int xmit_fifo_size; + int rx_high_water; + int rx_trigger; + int rx_low_water; + long max_baud; +} Gpci_uart_info[] = { + {MOXA_OTHER_UART, 16, 16, 16, 14, 14, 1, 921600L}, + {MOXA_MUST_MU150_HWID, 64, 64, 64, 48, 48, 16, 230400L}, + {MOXA_MUST_MU860_HWID, 128, 128, 128, 96, 96, 32, 921600L} +}; +#define UART_INFO_NUM ARRAY_SIZE(Gpci_uart_info) + +struct mxser_cardinfo { + char *name; + unsigned int nports; + unsigned int flags; +}; + +static const struct mxser_cardinfo mxser_cards[] = { +/* 0*/ { "C168 series", 8, }, + { "C104 series", 4, }, + { "CI-104J series", 4, }, + { "C168H/PCI series", 8, }, + { "C104H/PCI series", 4, }, +/* 5*/ { "C102 series", 4, MXSER_HAS2 }, /* C102-ISA */ + { "CI-132 series", 4, MXSER_HAS2 }, + { "CI-134 series", 4, }, + { "CP-132 series", 2, }, + { "CP-114 series", 4, }, +/*10*/ { "CT-114 series", 4, }, + { "CP-102 series", 2, MXSER_HIGHBAUD }, + { "CP-104U series", 4, }, + { "CP-168U series", 8, }, + { "CP-132U series", 2, }, +/*15*/ { "CP-134U series", 4, }, + { "CP-104JU series", 4, }, + { "Moxa UC7000 Serial", 8, }, /* RC7000 */ + { "CP-118U series", 8, }, + { "CP-102UL series", 2, }, +/*20*/ { "CP-102U series", 2, }, + { "CP-118EL series", 8, }, + { "CP-168EL series", 8, }, + { "CP-104EL series", 4, }, + { "CB-108 series", 8, }, +/*25*/ { "CB-114 series", 4, }, + { "CB-134I series", 4, }, + { "CP-138U series", 8, }, + { "POS-104UL series", 4, }, + { "CP-114UL series", 4, }, +/*30*/ { "CP-102UF series", 2, }, + { "CP-112UL series", 2, }, +}; + +/* driver_data correspond to the lines in the structure above + see also ISA probe function before you change something */ +static const struct pci_device_id mxser_pcibrds[] = { + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_C168), .driver_data = 3 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_C104), .driver_data = 4 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP132), .driver_data = 8 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP114), .driver_data = 9 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CT114), .driver_data = 10 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102), .driver_data = 11 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104U), .driver_data = 12 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP168U), .driver_data = 13 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP132U), .driver_data = 14 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP134U), .driver_data = 15 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104JU),.driver_data = 16 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_RC7000), .driver_data = 17 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP118U), .driver_data = 18 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102UL),.driver_data = 19 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102U), .driver_data = 20 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP118EL),.driver_data = 21 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP168EL),.driver_data = 22 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104EL),.driver_data = 23 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB108), .driver_data = 24 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB114), .driver_data = 25 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB134I), .driver_data = 26 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP138U), .driver_data = 27 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_POS104UL), .driver_data = 28 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP114UL), .driver_data = 29 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP102UF), .driver_data = 30 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP112UL), .driver_data = 31 }, + { } +}; +MODULE_DEVICE_TABLE(pci, mxser_pcibrds); + +static unsigned long ioaddr[MXSER_BOARDS]; +static int ttymajor = MXSERMAJOR; + +/* Variables for insmod */ + +MODULE_AUTHOR("Casper Yang"); +MODULE_DESCRIPTION("MOXA Smartio/Industio Family Multiport Board Device Driver"); +module_param_hw_array(ioaddr, ulong, ioport, NULL, 0); +MODULE_PARM_DESC(ioaddr, "ISA io addresses to look for a moxa board"); +module_param(ttymajor, int, 0); +MODULE_LICENSE("GPL"); + +struct mxser_log { + int tick; + unsigned long rxcnt[MXSER_PORTS]; + unsigned long txcnt[MXSER_PORTS]; +}; + +struct mxser_mon { + unsigned long rxcnt; + unsigned long txcnt; + unsigned long up_rxcnt; + unsigned long up_txcnt; + int modem_status; + unsigned char hold_reason; +}; + +struct mxser_mon_ext { + unsigned long rx_cnt[32]; + unsigned long tx_cnt[32]; + unsigned long up_rxcnt[32]; + unsigned long up_txcnt[32]; + int modem_status[32]; + + long baudrate[32]; + int databits[32]; + int stopbits[32]; + int parity[32]; + int flowctrl[32]; + int fifo[32]; + int iftype[32]; +}; + +struct mxser_board; + +struct mxser_port { + struct tty_port port; + struct mxser_board *board; + + unsigned long ioaddr; + unsigned long opmode_ioaddr; + int max_baud; + + int rx_high_water; + int rx_trigger; /* Rx fifo trigger level */ + int rx_low_water; + int baud_base; /* max. speed */ + int type; /* UART type */ + + int x_char; /* xon/xoff character */ + int IER; /* Interrupt Enable Register */ + int MCR; /* Modem control register */ + + unsigned char stop_rx; + unsigned char ldisc_stop_rx; + + int custom_divisor; + unsigned char err_shadow; + + struct async_icount icount; /* kernel counters for 4 input interrupts */ + unsigned int timeout; + + int read_status_mask; + int ignore_status_mask; + unsigned int xmit_fifo_size; + int xmit_head; + int xmit_tail; + int xmit_cnt; + int closing; + + struct ktermios normal_termios; + + struct mxser_mon mon_data; + + spinlock_t slock; +}; + +struct mxser_board { + unsigned int idx; + int irq; + const struct mxser_cardinfo *info; + unsigned long vector; + unsigned long vector_mask; + + int chip_flag; + int uart_type; + + struct mxser_port ports[MXSER_PORTS_PER_BOARD]; +}; + +struct mxser_mstatus { + tcflag_t cflag; + int cts; + int dsr; + int ri; + int dcd; +}; + +static struct mxser_board mxser_boards[MXSER_BOARDS]; +static struct tty_driver *mxvar_sdriver; +static struct mxser_log mxvar_log; +static int mxser_set_baud_method[MXSER_PORTS + 1]; + +static void mxser_enable_must_enchance_mode(unsigned long baseio) +{ + u8 oldlcr; + u8 efr; + + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); + + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr |= MOXA_MUST_EFR_EFRB_ENABLE; + + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + outb(oldlcr, baseio + UART_LCR); +} + +#ifdef CONFIG_PCI +static void mxser_disable_must_enchance_mode(unsigned long baseio) +{ + u8 oldlcr; + u8 efr; + + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); + + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_EFRB_ENABLE; + + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + outb(oldlcr, baseio + UART_LCR); +} +#endif + +static void mxser_set_must_xon1_value(unsigned long baseio, u8 value) +{ + u8 oldlcr; + u8 efr; + + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); + + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_BANK_MASK; + efr |= MOXA_MUST_EFR_BANK0; + + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + outb(value, baseio + MOXA_MUST_XON1_REGISTER); + outb(oldlcr, baseio + UART_LCR); +} + +static void mxser_set_must_xoff1_value(unsigned long baseio, u8 value) +{ + u8 oldlcr; + u8 efr; + + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); + + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_BANK_MASK; + efr |= MOXA_MUST_EFR_BANK0; + + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + outb(value, baseio + MOXA_MUST_XOFF1_REGISTER); + outb(oldlcr, baseio + UART_LCR); +} + +static void mxser_set_must_fifo_value(struct mxser_port *info) +{ + u8 oldlcr; + u8 efr; + + oldlcr = inb(info->ioaddr + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, info->ioaddr + UART_LCR); + + efr = inb(info->ioaddr + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_BANK_MASK; + efr |= MOXA_MUST_EFR_BANK1; + + outb(efr, info->ioaddr + MOXA_MUST_EFR_REGISTER); + outb((u8)info->rx_high_water, info->ioaddr + MOXA_MUST_RBRTH_REGISTER); + outb((u8)info->rx_trigger, info->ioaddr + MOXA_MUST_RBRTI_REGISTER); + outb((u8)info->rx_low_water, info->ioaddr + MOXA_MUST_RBRTL_REGISTER); + outb(oldlcr, info->ioaddr + UART_LCR); +} + +static void mxser_set_must_enum_value(unsigned long baseio, u8 value) +{ + u8 oldlcr; + u8 efr; + + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); + + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_BANK_MASK; + efr |= MOXA_MUST_EFR_BANK2; + + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + outb(value, baseio + MOXA_MUST_ENUM_REGISTER); + outb(oldlcr, baseio + UART_LCR); +} + +#ifdef CONFIG_PCI +static void mxser_get_must_hardware_id(unsigned long baseio, u8 *pId) +{ + u8 oldlcr; + u8 efr; + + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); + + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_BANK_MASK; + efr |= MOXA_MUST_EFR_BANK2; + + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + *pId = inb(baseio + MOXA_MUST_HWID_REGISTER); + outb(oldlcr, baseio + UART_LCR); +} +#endif + +static void SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(unsigned long baseio) +{ + u8 oldlcr; + u8 efr; + + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); + + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_SF_MASK; + + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + outb(oldlcr, baseio + UART_LCR); +} + +static void mxser_enable_must_tx_software_flow_control(unsigned long baseio) +{ + u8 oldlcr; + u8 efr; + + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); + + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_SF_TX_MASK; + efr |= MOXA_MUST_EFR_SF_TX1; + + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + outb(oldlcr, baseio + UART_LCR); +} + +static void mxser_disable_must_tx_software_flow_control(unsigned long baseio) +{ + u8 oldlcr; + u8 efr; + + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); + + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_SF_TX_MASK; + + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + outb(oldlcr, baseio + UART_LCR); +} + +static void mxser_enable_must_rx_software_flow_control(unsigned long baseio) +{ + u8 oldlcr; + u8 efr; + + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); + + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_SF_RX_MASK; + efr |= MOXA_MUST_EFR_SF_RX1; + + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + outb(oldlcr, baseio + UART_LCR); +} + +static void mxser_disable_must_rx_software_flow_control(unsigned long baseio) +{ + u8 oldlcr; + u8 efr; + + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); + + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_SF_RX_MASK; + + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + outb(oldlcr, baseio + UART_LCR); +} + +#ifdef CONFIG_PCI +static int CheckIsMoxaMust(unsigned long io) +{ + u8 oldmcr, hwid; + int i; + + outb(0, io + UART_LCR); + mxser_disable_must_enchance_mode(io); + oldmcr = inb(io + UART_MCR); + outb(0, io + UART_MCR); + mxser_set_must_xon1_value(io, 0x11); + if ((hwid = inb(io + UART_MCR)) != 0) { + outb(oldmcr, io + UART_MCR); + return MOXA_OTHER_UART; + } + + mxser_get_must_hardware_id(io, &hwid); + for (i = 1; i < UART_INFO_NUM; i++) { /* 0 = OTHER_UART */ + if (hwid == Gpci_uart_info[i].type) + return (int)hwid; + } + return MOXA_OTHER_UART; +} +#endif + +static void process_txrx_fifo(struct mxser_port *info) +{ + int i; + + if ((info->type == PORT_16450) || (info->type == PORT_8250)) { + info->rx_trigger = 1; + info->rx_high_water = 1; + info->rx_low_water = 1; + info->xmit_fifo_size = 1; + } else + for (i = 0; i < UART_INFO_NUM; i++) + if (info->board->chip_flag == Gpci_uart_info[i].type) { + info->rx_trigger = Gpci_uart_info[i].rx_trigger; + info->rx_low_water = Gpci_uart_info[i].rx_low_water; + info->rx_high_water = Gpci_uart_info[i].rx_high_water; + info->xmit_fifo_size = Gpci_uart_info[i].xmit_fifo_size; + break; + } +} + +static unsigned char mxser_get_msr(int baseaddr, int mode, int port) +{ + static unsigned char mxser_msr[MXSER_PORTS + 1]; + unsigned char status = 0; + + status = inb(baseaddr + UART_MSR); + + mxser_msr[port] &= 0x0F; + mxser_msr[port] |= status; + status = mxser_msr[port]; + if (mode) + mxser_msr[port] = 0; + + return status; +} + +static int mxser_carrier_raised(struct tty_port *port) +{ + struct mxser_port *mp = container_of(port, struct mxser_port, port); + return (inb(mp->ioaddr + UART_MSR) & UART_MSR_DCD)?1:0; +} + +static void mxser_dtr_rts(struct tty_port *port, int on) +{ + struct mxser_port *mp = container_of(port, struct mxser_port, port); + unsigned long flags; + + spin_lock_irqsave(&mp->slock, flags); + if (on) + outb(inb(mp->ioaddr + UART_MCR) | + UART_MCR_DTR | UART_MCR_RTS, mp->ioaddr + UART_MCR); + else + outb(inb(mp->ioaddr + UART_MCR)&~(UART_MCR_DTR | UART_MCR_RTS), + mp->ioaddr + UART_MCR); + spin_unlock_irqrestore(&mp->slock, flags); +} + +static int mxser_set_baud(struct tty_struct *tty, long newspd) +{ + struct mxser_port *info = tty->driver_data; + unsigned int quot = 0, baud; + unsigned char cval; + u64 timeout; + + if (!info->ioaddr) + return -1; + + if (newspd > info->max_baud) + return -1; + + if (newspd == 134) { + quot = 2 * info->baud_base / 269; + tty_encode_baud_rate(tty, 134, 134); + } else if (newspd) { + quot = info->baud_base / newspd; + if (quot == 0) + quot = 1; + baud = info->baud_base/quot; + tty_encode_baud_rate(tty, baud, baud); + } else { + quot = 0; + } + + /* + * worst case (128 * 1000 * 10 * 18432) needs 35 bits, so divide in the + * u64 domain + */ + timeout = (u64)info->xmit_fifo_size * HZ * 10 * quot; + do_div(timeout, info->baud_base); + info->timeout = timeout + HZ / 50; /* Add .02 seconds of slop */ + + if (quot) { + info->MCR |= UART_MCR_DTR; + outb(info->MCR, info->ioaddr + UART_MCR); + } else { + info->MCR &= ~UART_MCR_DTR; + outb(info->MCR, info->ioaddr + UART_MCR); + return 0; + } + + cval = inb(info->ioaddr + UART_LCR); + + outb(cval | UART_LCR_DLAB, info->ioaddr + UART_LCR); /* set DLAB */ + + outb(quot & 0xff, info->ioaddr + UART_DLL); /* LS of divisor */ + outb(quot >> 8, info->ioaddr + UART_DLM); /* MS of divisor */ + outb(cval, info->ioaddr + UART_LCR); /* reset DLAB */ + +#ifdef BOTHER + if (C_BAUD(tty) == BOTHER) { + quot = info->baud_base % newspd; + quot *= 8; + if (quot % newspd > newspd / 2) { + quot /= newspd; + quot++; + } else + quot /= newspd; + + mxser_set_must_enum_value(info->ioaddr, quot); + } else +#endif + mxser_set_must_enum_value(info->ioaddr, 0); + + return 0; +} + +/* + * This routine is called to set the UART divisor registers to match + * the specified baud rate for a serial port. + */ +static void mxser_change_speed(struct tty_struct *tty) +{ + struct mxser_port *info = tty->driver_data; + unsigned cflag, cval, fcr; + unsigned char status; + + cflag = tty->termios.c_cflag; + if (!info->ioaddr) + return; + + if (mxser_set_baud_method[tty->index] == 0) + mxser_set_baud(tty, tty_get_baud_rate(tty)); + + /* byte size and parity */ + switch (cflag & CSIZE) { + case CS5: + cval = 0x00; + break; + case CS6: + cval = 0x01; + break; + case CS7: + cval = 0x02; + break; + case CS8: + cval = 0x03; + break; + default: + cval = 0x00; + break; /* too keep GCC shut... */ + } + if (cflag & CSTOPB) + cval |= 0x04; + if (cflag & PARENB) + cval |= UART_LCR_PARITY; + if (!(cflag & PARODD)) + cval |= UART_LCR_EPAR; + if (cflag & CMSPAR) + cval |= UART_LCR_SPAR; + + if ((info->type == PORT_8250) || (info->type == PORT_16450)) { + if (info->board->chip_flag) { + fcr = UART_FCR_ENABLE_FIFO; + fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE; + mxser_set_must_fifo_value(info); + } else + fcr = 0; + } else { + fcr = UART_FCR_ENABLE_FIFO; + if (info->board->chip_flag) { + fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE; + mxser_set_must_fifo_value(info); + } else { + switch (info->rx_trigger) { + case 1: + fcr |= UART_FCR_TRIGGER_1; + break; + case 4: + fcr |= UART_FCR_TRIGGER_4; + break; + case 8: + fcr |= UART_FCR_TRIGGER_8; + break; + default: + fcr |= UART_FCR_TRIGGER_14; + break; + } + } + } + + /* CTS flow control flag and modem status interrupts */ + info->IER &= ~UART_IER_MSI; + info->MCR &= ~UART_MCR_AFE; + tty_port_set_cts_flow(&info->port, cflag & CRTSCTS); + if (cflag & CRTSCTS) { + info->IER |= UART_IER_MSI; + if ((info->type == PORT_16550A) || (info->board->chip_flag)) { + info->MCR |= UART_MCR_AFE; + } else { + status = inb(info->ioaddr + UART_MSR); + if (tty->hw_stopped) { + if (status & UART_MSR_CTS) { + tty->hw_stopped = 0; + if (info->type != PORT_16550A && + !info->board->chip_flag) { + outb(info->IER & ~UART_IER_THRI, + info->ioaddr + + UART_IER); + info->IER |= UART_IER_THRI; + outb(info->IER, info->ioaddr + + UART_IER); + } + tty_wakeup(tty); + } + } else { + if (!(status & UART_MSR_CTS)) { + tty->hw_stopped = 1; + if ((info->type != PORT_16550A) && + (!info->board->chip_flag)) { + info->IER &= ~UART_IER_THRI; + outb(info->IER, info->ioaddr + + UART_IER); + } + } + } + } + } + outb(info->MCR, info->ioaddr + UART_MCR); + tty_port_set_check_carrier(&info->port, ~cflag & CLOCAL); + if (~cflag & CLOCAL) + info->IER |= UART_IER_MSI; + outb(info->IER, info->ioaddr + UART_IER); + + /* + * Set up parity check flag + */ + info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + if (I_INPCK(tty)) + info->read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (I_BRKINT(tty) || I_PARMRK(tty)) + info->read_status_mask |= UART_LSR_BI; + + info->ignore_status_mask = 0; + + if (I_IGNBRK(tty)) { + info->ignore_status_mask |= UART_LSR_BI; + info->read_status_mask |= UART_LSR_BI; + /* + * If we're ignore parity and break indicators, ignore + * overruns too. (For real raw support). + */ + if (I_IGNPAR(tty)) { + info->ignore_status_mask |= + UART_LSR_OE | + UART_LSR_PE | + UART_LSR_FE; + info->read_status_mask |= + UART_LSR_OE | + UART_LSR_PE | + UART_LSR_FE; + } + } + if (info->board->chip_flag) { + mxser_set_must_xon1_value(info->ioaddr, START_CHAR(tty)); + mxser_set_must_xoff1_value(info->ioaddr, STOP_CHAR(tty)); + if (I_IXON(tty)) { + mxser_enable_must_rx_software_flow_control( + info->ioaddr); + } else { + mxser_disable_must_rx_software_flow_control( + info->ioaddr); + } + if (I_IXOFF(tty)) { + mxser_enable_must_tx_software_flow_control( + info->ioaddr); + } else { + mxser_disable_must_tx_software_flow_control( + info->ioaddr); + } + } + + + outb(fcr, info->ioaddr + UART_FCR); /* set fcr */ + outb(cval, info->ioaddr + UART_LCR); +} + +static void mxser_check_modem_status(struct tty_struct *tty, + struct mxser_port *port, int status) +{ + /* update input line counters */ + if (status & UART_MSR_TERI) + port->icount.rng++; + if (status & UART_MSR_DDSR) + port->icount.dsr++; + if (status & UART_MSR_DDCD) + port->icount.dcd++; + if (status & UART_MSR_DCTS) + port->icount.cts++; + port->mon_data.modem_status = status; + wake_up_interruptible(&port->port.delta_msr_wait); + + if (tty_port_check_carrier(&port->port) && (status & UART_MSR_DDCD)) { + if (status & UART_MSR_DCD) + wake_up_interruptible(&port->port.open_wait); + } + + if (tty_port_cts_enabled(&port->port)) { + if (tty->hw_stopped) { + if (status & UART_MSR_CTS) { + tty->hw_stopped = 0; + + if ((port->type != PORT_16550A) && + (!port->board->chip_flag)) { + outb(port->IER & ~UART_IER_THRI, + port->ioaddr + UART_IER); + port->IER |= UART_IER_THRI; + outb(port->IER, port->ioaddr + + UART_IER); + } + tty_wakeup(tty); + } + } else { + if (!(status & UART_MSR_CTS)) { + tty->hw_stopped = 1; + if (port->type != PORT_16550A && + !port->board->chip_flag) { + port->IER &= ~UART_IER_THRI; + outb(port->IER, port->ioaddr + + UART_IER); + } + } + } + } +} + +static int mxser_activate(struct tty_port *port, struct tty_struct *tty) +{ + struct mxser_port *info = container_of(port, struct mxser_port, port); + unsigned long page; + unsigned long flags; + int ret; + + page = __get_free_page(GFP_KERNEL); + if (!page) + return -ENOMEM; + + spin_lock_irqsave(&info->slock, flags); + + if (!info->ioaddr || !info->type) { + set_bit(TTY_IO_ERROR, &tty->flags); + spin_unlock_irqrestore(&info->slock, flags); + ret = 0; + goto err_free_xmit; + } + info->port.xmit_buf = (unsigned char *) page; + + /* + * Clear the FIFO buffers and disable them + * (they will be reenabled in mxser_change_speed()) + */ + if (info->board->chip_flag) + outb((UART_FCR_CLEAR_RCVR | + UART_FCR_CLEAR_XMIT | + MOXA_MUST_FCR_GDA_MODE_ENABLE), info->ioaddr + UART_FCR); + else + outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT), + info->ioaddr + UART_FCR); + + /* + * At this point there's no way the LSR could still be 0xFF; + * if it is, then bail out, because there's likely no UART + * here. + */ + if (inb(info->ioaddr + UART_LSR) == 0xff) { + spin_unlock_irqrestore(&info->slock, flags); + if (capable(CAP_SYS_ADMIN)) { + set_bit(TTY_IO_ERROR, &tty->flags); + return 0; + } + + ret = -ENODEV; + goto err_free_xmit; + } + + /* + * Clear the interrupt registers. + */ + (void) inb(info->ioaddr + UART_LSR); + (void) inb(info->ioaddr + UART_RX); + (void) inb(info->ioaddr + UART_IIR); + (void) inb(info->ioaddr + UART_MSR); + + /* + * Now, initialize the UART + */ + outb(UART_LCR_WLEN8, info->ioaddr + UART_LCR); /* reset DLAB */ + info->MCR = UART_MCR_DTR | UART_MCR_RTS; + outb(info->MCR, info->ioaddr + UART_MCR); + + /* + * Finally, enable interrupts + */ + info->IER = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI; + + if (info->board->chip_flag) + info->IER |= MOXA_MUST_IER_EGDAI; + outb(info->IER, info->ioaddr + UART_IER); /* enable interrupts */ + + /* + * And clear the interrupt registers again for luck. + */ + (void) inb(info->ioaddr + UART_LSR); + (void) inb(info->ioaddr + UART_RX); + (void) inb(info->ioaddr + UART_IIR); + (void) inb(info->ioaddr + UART_MSR); + + clear_bit(TTY_IO_ERROR, &tty->flags); + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + + /* + * and set the speed of the serial port + */ + mxser_change_speed(tty); + spin_unlock_irqrestore(&info->slock, flags); + + return 0; +err_free_xmit: + free_page(page); + info->port.xmit_buf = NULL; + return ret; +} + +/* + * This routine will shutdown a serial port + */ +static void mxser_shutdown_port(struct tty_port *port) +{ + struct mxser_port *info = container_of(port, struct mxser_port, port); + unsigned long flags; + + spin_lock_irqsave(&info->slock, flags); + + /* + * clear delta_msr_wait queue to avoid mem leaks: we may free the irq + * here so the queue might never be waken up + */ + wake_up_interruptible(&info->port.delta_msr_wait); + + /* + * Free the xmit buffer, if necessary + */ + if (info->port.xmit_buf) { + free_page((unsigned long) info->port.xmit_buf); + info->port.xmit_buf = NULL; + } + + info->IER = 0; + outb(0x00, info->ioaddr + UART_IER); + + /* clear Rx/Tx FIFO's */ + if (info->board->chip_flag) + outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT | + MOXA_MUST_FCR_GDA_MODE_ENABLE, + info->ioaddr + UART_FCR); + else + outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, + info->ioaddr + UART_FCR); + + /* read data port to reset things */ + (void) inb(info->ioaddr + UART_RX); + + + if (info->board->chip_flag) + SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(info->ioaddr); + + spin_unlock_irqrestore(&info->slock, flags); +} + +/* + * This routine is called whenever a serial port is opened. It + * enables interrupts for a serial port, linking in its async structure into + * the IRQ chain. It also performs the serial-specific + * initialization for the tty structure. + */ +static int mxser_open(struct tty_struct *tty, struct file *filp) +{ + struct mxser_port *info; + int line; + + line = tty->index; + if (line == MXSER_PORTS) + return 0; + info = &mxser_boards[line / MXSER_PORTS_PER_BOARD].ports[line % MXSER_PORTS_PER_BOARD]; + if (!info->ioaddr) + return -ENODEV; + + tty->driver_data = info; + return tty_port_open(&info->port, tty, filp); +} + +static void mxser_flush_buffer(struct tty_struct *tty) +{ + struct mxser_port *info = tty->driver_data; + char fcr; + unsigned long flags; + + + spin_lock_irqsave(&info->slock, flags); + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + + fcr = inb(info->ioaddr + UART_FCR); + outb((fcr | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT), + info->ioaddr + UART_FCR); + outb(fcr, info->ioaddr + UART_FCR); + + spin_unlock_irqrestore(&info->slock, flags); + + tty_wakeup(tty); +} + + +static void mxser_close_port(struct tty_port *port) +{ + struct mxser_port *info = container_of(port, struct mxser_port, port); + unsigned long timeout; + /* + * At this point we stop accepting input. To do this, we + * disable the receive line status interrupts, and tell the + * interrupt driver to stop checking the data ready bit in the + * line status register. + */ + info->IER &= ~UART_IER_RLSI; + if (info->board->chip_flag) + info->IER &= ~MOXA_MUST_RECV_ISR; + + outb(info->IER, info->ioaddr + UART_IER); + /* + * Before we drop DTR, make sure the UART transmitter + * has completely drained; this is especially + * important if there is a transmit FIFO! + */ + timeout = jiffies + HZ; + while (!(inb(info->ioaddr + UART_LSR) & UART_LSR_TEMT)) { + schedule_timeout_interruptible(5); + if (time_after(jiffies, timeout)) + break; + } +} + +/* + * This routine is called when the serial port gets closed. First, we + * wait for the last remaining data to be sent. Then, we unlink its + * async structure from the interrupt chain if necessary, and we free + * that IRQ if nothing is left in the chain. + */ +static void mxser_close(struct tty_struct *tty, struct file *filp) +{ + struct mxser_port *info = tty->driver_data; + struct tty_port *port = &info->port; + + if (tty->index == MXSER_PORTS || info == NULL) + return; + if (tty_port_close_start(port, tty, filp) == 0) + return; + info->closing = 1; + mutex_lock(&port->mutex); + mxser_close_port(port); + mxser_flush_buffer(tty); + if (tty_port_initialized(port) && C_HUPCL(tty)) + tty_port_lower_dtr_rts(port); + mxser_shutdown_port(port); + tty_port_set_initialized(port, 0); + mutex_unlock(&port->mutex); + info->closing = 0; + /* Right now the tty_port set is done outside of the close_end helper + as we don't yet have everyone using refcounts */ + tty_port_close_end(port, tty); + tty_port_tty_set(port, NULL); +} + +static int mxser_write(struct tty_struct *tty, const unsigned char *buf, int count) +{ + int c, total = 0; + struct mxser_port *info = tty->driver_data; + unsigned long flags; + + if (!info->port.xmit_buf) + return 0; + + while (1) { + c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, + SERIAL_XMIT_SIZE - info->xmit_head)); + if (c <= 0) + break; + + memcpy(info->port.xmit_buf + info->xmit_head, buf, c); + spin_lock_irqsave(&info->slock, flags); + info->xmit_head = (info->xmit_head + c) & + (SERIAL_XMIT_SIZE - 1); + info->xmit_cnt += c; + spin_unlock_irqrestore(&info->slock, flags); + + buf += c; + count -= c; + total += c; + } + + if (info->xmit_cnt && !tty->stopped) { + if (!tty->hw_stopped || + (info->type == PORT_16550A) || + (info->board->chip_flag)) { + spin_lock_irqsave(&info->slock, flags); + outb(info->IER & ~UART_IER_THRI, info->ioaddr + + UART_IER); + info->IER |= UART_IER_THRI; + outb(info->IER, info->ioaddr + UART_IER); + spin_unlock_irqrestore(&info->slock, flags); + } + } + return total; +} + +static int mxser_put_char(struct tty_struct *tty, unsigned char ch) +{ + struct mxser_port *info = tty->driver_data; + unsigned long flags; + + if (!info->port.xmit_buf) + return 0; + + if (info->xmit_cnt >= SERIAL_XMIT_SIZE - 1) + return 0; + + spin_lock_irqsave(&info->slock, flags); + info->port.xmit_buf[info->xmit_head++] = ch; + info->xmit_head &= SERIAL_XMIT_SIZE - 1; + info->xmit_cnt++; + spin_unlock_irqrestore(&info->slock, flags); + if (!tty->stopped) { + if (!tty->hw_stopped || + (info->type == PORT_16550A) || + info->board->chip_flag) { + spin_lock_irqsave(&info->slock, flags); + outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER); + info->IER |= UART_IER_THRI; + outb(info->IER, info->ioaddr + UART_IER); + spin_unlock_irqrestore(&info->slock, flags); + } + } + return 1; +} + + +static void mxser_flush_chars(struct tty_struct *tty) +{ + struct mxser_port *info = tty->driver_data; + unsigned long flags; + + if (info->xmit_cnt <= 0 || tty->stopped || !info->port.xmit_buf || + (tty->hw_stopped && info->type != PORT_16550A && + !info->board->chip_flag)) + return; + + spin_lock_irqsave(&info->slock, flags); + + outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER); + info->IER |= UART_IER_THRI; + outb(info->IER, info->ioaddr + UART_IER); + + spin_unlock_irqrestore(&info->slock, flags); +} + +static int mxser_write_room(struct tty_struct *tty) +{ + struct mxser_port *info = tty->driver_data; + int ret; + + ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1; + return ret < 0 ? 0 : ret; +} + +static int mxser_chars_in_buffer(struct tty_struct *tty) +{ + struct mxser_port *info = tty->driver_data; + return info->xmit_cnt; +} + +/* + * ------------------------------------------------------------ + * friends of mxser_ioctl() + * ------------------------------------------------------------ + */ +static int mxser_get_serial_info(struct tty_struct *tty, + struct serial_struct *ss) +{ + struct mxser_port *info = tty->driver_data; + struct tty_port *port = &info->port; + + if (tty->index == MXSER_PORTS) + return -ENOTTY; + + mutex_lock(&port->mutex); + ss->type = info->type, + ss->line = tty->index, + ss->port = info->ioaddr, + ss->irq = info->board->irq, + ss->flags = info->port.flags, + ss->baud_base = info->baud_base, + ss->close_delay = info->port.close_delay, + ss->closing_wait = info->port.closing_wait, + ss->custom_divisor = info->custom_divisor, + mutex_unlock(&port->mutex); + return 0; +} + +static int mxser_set_serial_info(struct tty_struct *tty, + struct serial_struct *ss) +{ + struct mxser_port *info = tty->driver_data; + struct tty_port *port = &info->port; + speed_t baud; + unsigned long sl_flags; + unsigned int flags; + int retval = 0; + + if (tty->index == MXSER_PORTS) + return -ENOTTY; + if (tty_io_error(tty)) + return -EIO; + + mutex_lock(&port->mutex); + if (!info->ioaddr) { + mutex_unlock(&port->mutex); + return -ENODEV; + } + + if (ss->irq != info->board->irq || + ss->port != info->ioaddr) { + mutex_unlock(&port->mutex); + return -EINVAL; + } + + flags = port->flags & ASYNC_SPD_MASK; + + if (!capable(CAP_SYS_ADMIN)) { + if ((ss->baud_base != info->baud_base) || + (ss->close_delay != info->port.close_delay) || + ((ss->flags & ~ASYNC_USR_MASK) != (info->port.flags & ~ASYNC_USR_MASK))) { + mutex_unlock(&port->mutex); + return -EPERM; + } + info->port.flags = ((info->port.flags & ~ASYNC_USR_MASK) | + (ss->flags & ASYNC_USR_MASK)); + } else { + /* + * OK, past this point, all the error checking has been done. + * At this point, we start making changes..... + */ + port->flags = ((port->flags & ~ASYNC_FLAGS) | + (ss->flags & ASYNC_FLAGS)); + port->close_delay = ss->close_delay * HZ / 100; + port->closing_wait = ss->closing_wait * HZ / 100; + port->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST && + (ss->baud_base != info->baud_base || + ss->custom_divisor != + info->custom_divisor)) { + if (ss->custom_divisor == 0) { + mutex_unlock(&port->mutex); + return -EINVAL; + } + baud = ss->baud_base / ss->custom_divisor; + tty_encode_baud_rate(tty, baud, baud); + } + } + + info->type = ss->type; + + process_txrx_fifo(info); + + if (tty_port_initialized(port)) { + if (flags != (port->flags & ASYNC_SPD_MASK)) { + spin_lock_irqsave(&info->slock, sl_flags); + mxser_change_speed(tty); + spin_unlock_irqrestore(&info->slock, sl_flags); + } + } else { + retval = mxser_activate(port, tty); + if (retval == 0) + tty_port_set_initialized(port, 1); + } + mutex_unlock(&port->mutex); + return retval; +} + +/* + * mxser_get_lsr_info - get line status register info + * + * Purpose: Let user call ioctl() to get info when the UART physically + * is emptied. On bus types like RS485, the transmitter must + * release the bus after transmitting. This must be done when + * the transmit shift register is empty, not be done when the + * transmit holding register is empty. This functionality + * allows an RS485 driver to be written in user space. + */ +static int mxser_get_lsr_info(struct mxser_port *info, + unsigned int __user *value) +{ + unsigned char status; + unsigned int result; + unsigned long flags; + + spin_lock_irqsave(&info->slock, flags); + status = inb(info->ioaddr + UART_LSR); + spin_unlock_irqrestore(&info->slock, flags); + result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0); + return put_user(result, value); +} + +static int mxser_tiocmget(struct tty_struct *tty) +{ + struct mxser_port *info = tty->driver_data; + unsigned char control, status; + unsigned long flags; + + + if (tty->index == MXSER_PORTS) + return -ENOIOCTLCMD; + if (tty_io_error(tty)) + return -EIO; + + control = info->MCR; + + spin_lock_irqsave(&info->slock, flags); + status = inb(info->ioaddr + UART_MSR); + if (status & UART_MSR_ANY_DELTA) + mxser_check_modem_status(tty, info, status); + spin_unlock_irqrestore(&info->slock, flags); + return ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) | + ((control & UART_MCR_DTR) ? TIOCM_DTR : 0) | + ((status & UART_MSR_DCD) ? TIOCM_CAR : 0) | + ((status & UART_MSR_RI) ? TIOCM_RNG : 0) | + ((status & UART_MSR_DSR) ? TIOCM_DSR : 0) | + ((status & UART_MSR_CTS) ? TIOCM_CTS : 0); +} + +static int mxser_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct mxser_port *info = tty->driver_data; + unsigned long flags; + + + if (tty->index == MXSER_PORTS) + return -ENOIOCTLCMD; + if (tty_io_error(tty)) + return -EIO; + + spin_lock_irqsave(&info->slock, flags); + + if (set & TIOCM_RTS) + info->MCR |= UART_MCR_RTS; + if (set & TIOCM_DTR) + info->MCR |= UART_MCR_DTR; + + if (clear & TIOCM_RTS) + info->MCR &= ~UART_MCR_RTS; + if (clear & TIOCM_DTR) + info->MCR &= ~UART_MCR_DTR; + + outb(info->MCR, info->ioaddr + UART_MCR); + spin_unlock_irqrestore(&info->slock, flags); + return 0; +} + +static int __init mxser_program_mode(int port) +{ + int id, i, j, n; + + outb(0, port); + outb(0, port); + outb(0, port); + (void)inb(port); + (void)inb(port); + outb(0, port); + (void)inb(port); + + id = inb(port + 1) & 0x1F; + if ((id != C168_ASIC_ID) && + (id != C104_ASIC_ID) && + (id != C102_ASIC_ID) && + (id != CI132_ASIC_ID) && + (id != CI134_ASIC_ID) && + (id != CI104J_ASIC_ID)) + return -1; + for (i = 0, j = 0; i < 4; i++) { + n = inb(port + 2); + if (n == 'M') { + j = 1; + } else if ((j == 1) && (n == 1)) { + j = 2; + break; + } else + j = 0; + } + if (j != 2) + id = -2; + return id; +} + +static void __init mxser_normal_mode(int port) +{ + int i, n; + + outb(0xA5, port + 1); + outb(0x80, port + 3); + outb(12, port + 0); /* 9600 bps */ + outb(0, port + 1); + outb(0x03, port + 3); /* 8 data bits */ + outb(0x13, port + 4); /* loop back mode */ + for (i = 0; i < 16; i++) { + n = inb(port + 5); + if ((n & 0x61) == 0x60) + break; + if ((n & 1) == 1) + (void)inb(port); + } + outb(0x00, port + 4); +} + +#define CHIP_SK 0x01 /* Serial Data Clock in Eprom */ +#define CHIP_DO 0x02 /* Serial Data Output in Eprom */ +#define CHIP_CS 0x04 /* Serial Chip Select in Eprom */ +#define CHIP_DI 0x08 /* Serial Data Input in Eprom */ +#define EN_CCMD 0x000 /* Chip's command register */ +#define EN0_RSARLO 0x008 /* Remote start address reg 0 */ +#define EN0_RSARHI 0x009 /* Remote start address reg 1 */ +#define EN0_RCNTLO 0x00A /* Remote byte count reg WR */ +#define EN0_RCNTHI 0x00B /* Remote byte count reg WR */ +#define EN0_DCFG 0x00E /* Data configuration reg WR */ +#define EN0_PORT 0x010 /* Rcv missed frame error counter RD */ +#define ENC_PAGE0 0x000 /* Select page 0 of chip registers */ +#define ENC_PAGE3 0x0C0 /* Select page 3 of chip registers */ +static int __init mxser_read_register(int port, unsigned short *regs) +{ + int i, k, value, id; + unsigned int j; + + id = mxser_program_mode(port); + if (id < 0) + return id; + for (i = 0; i < 14; i++) { + k = (i & 0x3F) | 0x180; + for (j = 0x100; j > 0; j >>= 1) { + outb(CHIP_CS, port); + if (k & j) { + outb(CHIP_CS | CHIP_DO, port); + outb(CHIP_CS | CHIP_DO | CHIP_SK, port); /* A? bit of read */ + } else { + outb(CHIP_CS, port); + outb(CHIP_CS | CHIP_SK, port); /* A? bit of read */ + } + } + (void)inb(port); + value = 0; + for (k = 0, j = 0x8000; k < 16; k++, j >>= 1) { + outb(CHIP_CS, port); + outb(CHIP_CS | CHIP_SK, port); + if (inb(port) & CHIP_DI) + value |= j; + } + regs[i] = value; + outb(0, port); + } + mxser_normal_mode(port); + return id; +} + +static int mxser_ioctl_special(unsigned int cmd, void __user *argp) +{ + struct mxser_port *ip; + struct tty_port *port; + struct tty_struct *tty; + int result, status; + unsigned int i, j; + int ret = 0; + + switch (cmd) { + case MOXA_GET_MAJOR: + printk_ratelimited(KERN_WARNING "mxser: '%s' uses deprecated ioctl " + "%x (GET_MAJOR), fix your userspace\n", + current->comm, cmd); + return put_user(ttymajor, (int __user *)argp); + + case MOXA_CHKPORTENABLE: + result = 0; + for (i = 0; i < MXSER_BOARDS; i++) + for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) + if (mxser_boards[i].ports[j].ioaddr) + result |= (1 << i); + return put_user(result, (unsigned long __user *)argp); + case MOXA_GETDATACOUNT: + /* The receive side is locked by port->slock but it isn't + clear that an exact snapshot is worth copying here */ + if (copy_to_user(argp, &mxvar_log, sizeof(mxvar_log))) + ret = -EFAULT; + return ret; + case MOXA_GETMSTATUS: { + struct mxser_mstatus ms, __user *msu = argp; + for (i = 0; i < MXSER_BOARDS; i++) + for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) { + ip = &mxser_boards[i].ports[j]; + port = &ip->port; + memset(&ms, 0, sizeof(ms)); + + mutex_lock(&port->mutex); + if (!ip->ioaddr) + goto copy; + + tty = tty_port_tty_get(port); + + if (!tty) + ms.cflag = ip->normal_termios.c_cflag; + else + ms.cflag = tty->termios.c_cflag; + tty_kref_put(tty); + spin_lock_irq(&ip->slock); + status = inb(ip->ioaddr + UART_MSR); + spin_unlock_irq(&ip->slock); + if (status & UART_MSR_DCD) + ms.dcd = 1; + if (status & UART_MSR_DSR) + ms.dsr = 1; + if (status & UART_MSR_CTS) + ms.cts = 1; + copy: + mutex_unlock(&port->mutex); + if (copy_to_user(msu, &ms, sizeof(ms))) + return -EFAULT; + msu++; + } + return 0; + } + case MOXA_ASPP_MON_EXT: { + struct mxser_mon_ext *me; /* it's 2k, stack unfriendly */ + unsigned int cflag, iflag, p; + u8 opmode; + + me = kzalloc(sizeof(*me), GFP_KERNEL); + if (!me) + return -ENOMEM; + + for (i = 0, p = 0; i < MXSER_BOARDS; i++) { + for (j = 0; j < MXSER_PORTS_PER_BOARD; j++, p++) { + if (p >= ARRAY_SIZE(me->rx_cnt)) { + i = MXSER_BOARDS; + break; + } + ip = &mxser_boards[i].ports[j]; + port = &ip->port; + + mutex_lock(&port->mutex); + if (!ip->ioaddr) { + mutex_unlock(&port->mutex); + continue; + } + + spin_lock_irq(&ip->slock); + status = mxser_get_msr(ip->ioaddr, 0, p); + + if (status & UART_MSR_TERI) + ip->icount.rng++; + if (status & UART_MSR_DDSR) + ip->icount.dsr++; + if (status & UART_MSR_DDCD) + ip->icount.dcd++; + if (status & UART_MSR_DCTS) + ip->icount.cts++; + + ip->mon_data.modem_status = status; + me->rx_cnt[p] = ip->mon_data.rxcnt; + me->tx_cnt[p] = ip->mon_data.txcnt; + me->up_rxcnt[p] = ip->mon_data.up_rxcnt; + me->up_txcnt[p] = ip->mon_data.up_txcnt; + me->modem_status[p] = + ip->mon_data.modem_status; + spin_unlock_irq(&ip->slock); + + tty = tty_port_tty_get(&ip->port); + + if (!tty) { + cflag = ip->normal_termios.c_cflag; + iflag = ip->normal_termios.c_iflag; + me->baudrate[p] = tty_termios_baud_rate(&ip->normal_termios); + } else { + cflag = tty->termios.c_cflag; + iflag = tty->termios.c_iflag; + me->baudrate[p] = tty_get_baud_rate(tty); + } + tty_kref_put(tty); + + me->databits[p] = cflag & CSIZE; + me->stopbits[p] = cflag & CSTOPB; + me->parity[p] = cflag & (PARENB | PARODD | + CMSPAR); + + if (cflag & CRTSCTS) + me->flowctrl[p] |= 0x03; + + if (iflag & (IXON | IXOFF)) + me->flowctrl[p] |= 0x0C; + + if (ip->type == PORT_16550A) + me->fifo[p] = 1; + + if (ip->board->chip_flag == MOXA_MUST_MU860_HWID) { + opmode = inb(ip->opmode_ioaddr)>>((p % 4) * 2); + opmode &= OP_MODE_MASK; + } else { + opmode = RS232_MODE; + } + me->iftype[p] = opmode; + mutex_unlock(&port->mutex); + } + } + if (copy_to_user(argp, me, sizeof(*me))) + ret = -EFAULT; + kfree(me); + return ret; + } + default: + return -ENOIOCTLCMD; + } + return 0; +} + +static int mxser_cflags_changed(struct mxser_port *info, unsigned long arg, + struct async_icount *cprev) +{ + struct async_icount cnow; + unsigned long flags; + int ret; + + spin_lock_irqsave(&info->slock, flags); + cnow = info->icount; /* atomic copy */ + spin_unlock_irqrestore(&info->slock, flags); + + ret = ((arg & TIOCM_RNG) && (cnow.rng != cprev->rng)) || + ((arg & TIOCM_DSR) && (cnow.dsr != cprev->dsr)) || + ((arg & TIOCM_CD) && (cnow.dcd != cprev->dcd)) || + ((arg & TIOCM_CTS) && (cnow.cts != cprev->cts)); + + *cprev = cnow; + + return ret; +} + +static int mxser_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct mxser_port *info = tty->driver_data; + struct async_icount cnow; + unsigned long flags; + void __user *argp = (void __user *)arg; + + if (tty->index == MXSER_PORTS) + return mxser_ioctl_special(cmd, argp); + + if (cmd == MOXA_SET_OP_MODE || cmd == MOXA_GET_OP_MODE) { + int p; + unsigned long opmode; + static unsigned char ModeMask[] = { 0xfc, 0xf3, 0xcf, 0x3f }; + int shiftbit; + unsigned char val, mask; + + if (info->board->chip_flag != MOXA_MUST_MU860_HWID) + return -EFAULT; + + p = tty->index % 4; + if (cmd == MOXA_SET_OP_MODE) { + if (get_user(opmode, (int __user *) argp)) + return -EFAULT; + if (opmode != RS232_MODE && + opmode != RS485_2WIRE_MODE && + opmode != RS422_MODE && + opmode != RS485_4WIRE_MODE) + return -EFAULT; + mask = ModeMask[p]; + shiftbit = p * 2; + spin_lock_irq(&info->slock); + val = inb(info->opmode_ioaddr); + val &= mask; + val |= (opmode << shiftbit); + outb(val, info->opmode_ioaddr); + spin_unlock_irq(&info->slock); + } else { + shiftbit = p * 2; + spin_lock_irq(&info->slock); + opmode = inb(info->opmode_ioaddr) >> shiftbit; + spin_unlock_irq(&info->slock); + opmode &= OP_MODE_MASK; + if (put_user(opmode, (int __user *)argp)) + return -EFAULT; + } + return 0; + } + + if (cmd != TIOCMIWAIT && tty_io_error(tty)) + return -EIO; + + switch (cmd) { + case TIOCSERGETLSR: /* Get line status register */ + return mxser_get_lsr_info(info, argp); + /* + * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change + * - mask passed in arg for lines of interest + * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) + * Caller should use TIOCGICOUNT to see which one it was + */ + case TIOCMIWAIT: + spin_lock_irqsave(&info->slock, flags); + cnow = info->icount; /* note the counters on entry */ + spin_unlock_irqrestore(&info->slock, flags); + + return wait_event_interruptible(info->port.delta_msr_wait, + mxser_cflags_changed(info, arg, &cnow)); + case MOXA_HighSpeedOn: + return put_user(info->baud_base != 115200 ? 1 : 0, (int __user *)argp); + case MOXA_SDS_RSTICOUNTER: + spin_lock_irq(&info->slock); + info->mon_data.rxcnt = 0; + info->mon_data.txcnt = 0; + spin_unlock_irq(&info->slock); + return 0; + + case MOXA_ASPP_OQUEUE:{ + int len, lsr; + + len = mxser_chars_in_buffer(tty); + spin_lock_irq(&info->slock); + lsr = inb(info->ioaddr + UART_LSR) & UART_LSR_THRE; + spin_unlock_irq(&info->slock); + len += (lsr ? 0 : 1); + + return put_user(len, (int __user *)argp); + } + case MOXA_ASPP_MON: { + int mcr, status; + + spin_lock_irq(&info->slock); + status = mxser_get_msr(info->ioaddr, 1, tty->index); + mxser_check_modem_status(tty, info, status); + + mcr = inb(info->ioaddr + UART_MCR); + spin_unlock_irq(&info->slock); + + if (mcr & MOXA_MUST_MCR_XON_FLAG) + info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFHOLD; + else + info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFHOLD; + + if (mcr & MOXA_MUST_MCR_TX_XON) + info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFXENT; + else + info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFXENT; + + if (tty->hw_stopped) + info->mon_data.hold_reason |= NPPI_NOTIFY_CTSHOLD; + else + info->mon_data.hold_reason &= ~NPPI_NOTIFY_CTSHOLD; + + if (copy_to_user(argp, &info->mon_data, + sizeof(struct mxser_mon))) + return -EFAULT; + + return 0; + } + case MOXA_ASPP_LSTATUS: { + if (put_user(info->err_shadow, (unsigned char __user *)argp)) + return -EFAULT; + + info->err_shadow = 0; + return 0; + } + case MOXA_SET_BAUD_METHOD: { + int method; + + if (get_user(method, (int __user *)argp)) + return -EFAULT; + mxser_set_baud_method[tty->index] = method; + return put_user(method, (int __user *)argp); + } + default: + return -ENOIOCTLCMD; + } + return 0; +} + + /* + * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) + * Return: write counters to the user passed counter struct + * NB: both 1->0 and 0->1 transitions are counted except for + * RI where only 0->1 is counted. + */ + +static int mxser_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount) + +{ + struct mxser_port *info = tty->driver_data; + struct async_icount cnow; + unsigned long flags; + + spin_lock_irqsave(&info->slock, flags); + cnow = info->icount; + spin_unlock_irqrestore(&info->slock, flags); + + icount->frame = cnow.frame; + icount->brk = cnow.brk; + icount->overrun = cnow.overrun; + icount->buf_overrun = cnow.buf_overrun; + icount->parity = cnow.parity; + icount->rx = cnow.rx; + icount->tx = cnow.tx; + icount->cts = cnow.cts; + icount->dsr = cnow.dsr; + icount->rng = cnow.rng; + icount->dcd = cnow.dcd; + return 0; +} + +static void mxser_stoprx(struct tty_struct *tty) +{ + struct mxser_port *info = tty->driver_data; + + info->ldisc_stop_rx = 1; + if (I_IXOFF(tty)) { + if (info->board->chip_flag) { + info->IER &= ~MOXA_MUST_RECV_ISR; + outb(info->IER, info->ioaddr + UART_IER); + } else { + info->x_char = STOP_CHAR(tty); + outb(0, info->ioaddr + UART_IER); + info->IER |= UART_IER_THRI; + outb(info->IER, info->ioaddr + UART_IER); + } + } + + if (C_CRTSCTS(tty)) { + info->MCR &= ~UART_MCR_RTS; + outb(info->MCR, info->ioaddr + UART_MCR); + } +} + +/* + * This routine is called by the upper-layer tty layer to signal that + * incoming characters should be throttled. + */ +static void mxser_throttle(struct tty_struct *tty) +{ + mxser_stoprx(tty); +} + +static void mxser_unthrottle(struct tty_struct *tty) +{ + struct mxser_port *info = tty->driver_data; + + /* startrx */ + info->ldisc_stop_rx = 0; + if (I_IXOFF(tty)) { + if (info->x_char) + info->x_char = 0; + else { + if (info->board->chip_flag) { + info->IER |= MOXA_MUST_RECV_ISR; + outb(info->IER, info->ioaddr + UART_IER); + } else { + info->x_char = START_CHAR(tty); + outb(0, info->ioaddr + UART_IER); + info->IER |= UART_IER_THRI; + outb(info->IER, info->ioaddr + UART_IER); + } + } + } + + if (C_CRTSCTS(tty)) { + info->MCR |= UART_MCR_RTS; + outb(info->MCR, info->ioaddr + UART_MCR); + } +} + +/* + * mxser_stop() and mxser_start() + * + * This routines are called before setting or resetting tty->stopped. + * They enable or disable transmitter interrupts, as necessary. + */ +static void mxser_stop(struct tty_struct *tty) +{ + struct mxser_port *info = tty->driver_data; + unsigned long flags; + + spin_lock_irqsave(&info->slock, flags); + if (info->IER & UART_IER_THRI) { + info->IER &= ~UART_IER_THRI; + outb(info->IER, info->ioaddr + UART_IER); + } + spin_unlock_irqrestore(&info->slock, flags); +} + +static void mxser_start(struct tty_struct *tty) +{ + struct mxser_port *info = tty->driver_data; + unsigned long flags; + + spin_lock_irqsave(&info->slock, flags); + if (info->xmit_cnt && info->port.xmit_buf) { + outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER); + info->IER |= UART_IER_THRI; + outb(info->IER, info->ioaddr + UART_IER); + } + spin_unlock_irqrestore(&info->slock, flags); +} + +static void mxser_set_termios(struct tty_struct *tty, struct ktermios *old_termios) +{ + struct mxser_port *info = tty->driver_data; + unsigned long flags; + + spin_lock_irqsave(&info->slock, flags); + mxser_change_speed(tty); + spin_unlock_irqrestore(&info->slock, flags); + + if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty)) { + tty->hw_stopped = 0; + mxser_start(tty); + } + + /* Handle sw stopped */ + if ((old_termios->c_iflag & IXON) && !I_IXON(tty)) { + tty->stopped = 0; + + if (info->board->chip_flag) { + spin_lock_irqsave(&info->slock, flags); + mxser_disable_must_rx_software_flow_control( + info->ioaddr); + spin_unlock_irqrestore(&info->slock, flags); + } + + mxser_start(tty); + } +} + +/* + * mxser_wait_until_sent() --- wait until the transmitter is empty + */ +static void mxser_wait_until_sent(struct tty_struct *tty, int timeout) +{ + struct mxser_port *info = tty->driver_data; + unsigned long orig_jiffies, char_time; + unsigned long flags; + int lsr; + + if (info->type == PORT_UNKNOWN) + return; + + if (info->xmit_fifo_size == 0) + return; /* Just in case.... */ + + orig_jiffies = jiffies; + /* + * Set the check interval to be 1/5 of the estimated time to + * send a single character, and make it at least 1. The check + * interval should also be less than the timeout. + * + * Note: we have to use pretty tight timings here to satisfy + * the NIST-PCTS. + */ + char_time = (info->timeout - HZ / 50) / info->xmit_fifo_size; + char_time = char_time / 5; + if (char_time == 0) + char_time = 1; + if (timeout && timeout < char_time) + char_time = timeout; + /* + * If the transmitter hasn't cleared in twice the approximate + * amount of time to send the entire FIFO, it probably won't + * ever clear. This assumes the UART isn't doing flow + * control, which is currently the case. Hence, if it ever + * takes longer than info->timeout, this is probably due to a + * UART bug of some kind. So, we clamp the timeout parameter at + * 2*info->timeout. + */ + if (!timeout || timeout > 2 * info->timeout) + timeout = 2 * info->timeout; + + spin_lock_irqsave(&info->slock, flags); + while (!((lsr = inb(info->ioaddr + UART_LSR)) & UART_LSR_TEMT)) { + spin_unlock_irqrestore(&info->slock, flags); + schedule_timeout_interruptible(char_time); + spin_lock_irqsave(&info->slock, flags); + if (signal_pending(current)) + break; + if (timeout && time_after(jiffies, orig_jiffies + timeout)) + break; + } + spin_unlock_irqrestore(&info->slock, flags); + set_current_state(TASK_RUNNING); +} + +/* + * This routine is called by tty_hangup() when a hangup is signaled. + */ +static void mxser_hangup(struct tty_struct *tty) +{ + struct mxser_port *info = tty->driver_data; + + mxser_flush_buffer(tty); + tty_port_hangup(&info->port); +} + +/* + * mxser_rs_break() --- routine which turns the break handling on or off + */ +static int mxser_rs_break(struct tty_struct *tty, int break_state) +{ + struct mxser_port *info = tty->driver_data; + unsigned long flags; + + spin_lock_irqsave(&info->slock, flags); + if (break_state == -1) + outb(inb(info->ioaddr + UART_LCR) | UART_LCR_SBC, + info->ioaddr + UART_LCR); + else + outb(inb(info->ioaddr + UART_LCR) & ~UART_LCR_SBC, + info->ioaddr + UART_LCR); + spin_unlock_irqrestore(&info->slock, flags); + return 0; +} + +static void mxser_receive_chars(struct tty_struct *tty, + struct mxser_port *port, int *status) +{ + unsigned char ch, gdl; + int ignored = 0; + int cnt = 0; + int recv_room; + int max = 256; + + recv_room = tty->receive_room; + if (recv_room == 0 && !port->ldisc_stop_rx) + mxser_stoprx(tty); + if (port->board->chip_flag != MOXA_OTHER_UART) { + + if (*status & UART_LSR_SPECIAL) + goto intr_old; + if (port->board->chip_flag == MOXA_MUST_MU860_HWID && + (*status & MOXA_MUST_LSR_RERR)) + goto intr_old; + if (*status & MOXA_MUST_LSR_RERR) + goto intr_old; + + gdl = inb(port->ioaddr + MOXA_MUST_GDL_REGISTER); + + if (port->board->chip_flag == MOXA_MUST_MU150_HWID) + gdl &= MOXA_MUST_GDL_MASK; + if (gdl >= recv_room) { + if (!port->ldisc_stop_rx) + mxser_stoprx(tty); + } + while (gdl--) { + ch = inb(port->ioaddr + UART_RX); + tty_insert_flip_char(&port->port, ch, 0); + cnt++; + } + goto end_intr; + } +intr_old: + + do { + if (max-- < 0) + break; + + ch = inb(port->ioaddr + UART_RX); + if (port->board->chip_flag && (*status & UART_LSR_OE)) + outb(0x23, port->ioaddr + UART_FCR); + *status &= port->read_status_mask; + if (*status & port->ignore_status_mask) { + if (++ignored > 100) + break; + } else { + char flag = 0; + if (*status & UART_LSR_SPECIAL) { + if (*status & UART_LSR_BI) { + flag = TTY_BREAK; + port->icount.brk++; + + if (port->port.flags & ASYNC_SAK) + do_SAK(tty); + } else if (*status & UART_LSR_PE) { + flag = TTY_PARITY; + port->icount.parity++; + } else if (*status & UART_LSR_FE) { + flag = TTY_FRAME; + port->icount.frame++; + } else if (*status & UART_LSR_OE) { + flag = TTY_OVERRUN; + port->icount.overrun++; + } else + flag = TTY_BREAK; + } + tty_insert_flip_char(&port->port, ch, flag); + cnt++; + if (cnt >= recv_room) { + if (!port->ldisc_stop_rx) + mxser_stoprx(tty); + break; + } + + } + + if (port->board->chip_flag) + break; + + *status = inb(port->ioaddr + UART_LSR); + } while (*status & UART_LSR_DR); + +end_intr: + mxvar_log.rxcnt[tty->index] += cnt; + port->mon_data.rxcnt += cnt; + port->mon_data.up_rxcnt += cnt; + + /* + * We are called from an interrupt context with &port->slock + * being held. Drop it temporarily in order to prevent + * recursive locking. + */ + spin_unlock(&port->slock); + tty_flip_buffer_push(&port->port); + spin_lock(&port->slock); +} + +static void mxser_transmit_chars(struct tty_struct *tty, struct mxser_port *port) +{ + int count, cnt; + + if (port->x_char) { + outb(port->x_char, port->ioaddr + UART_TX); + port->x_char = 0; + mxvar_log.txcnt[tty->index]++; + port->mon_data.txcnt++; + port->mon_data.up_txcnt++; + port->icount.tx++; + return; + } + + if (port->port.xmit_buf == NULL) + return; + + if (port->xmit_cnt <= 0 || tty->stopped || + (tty->hw_stopped && + (port->type != PORT_16550A) && + (!port->board->chip_flag))) { + port->IER &= ~UART_IER_THRI; + outb(port->IER, port->ioaddr + UART_IER); + return; + } + + cnt = port->xmit_cnt; + count = port->xmit_fifo_size; + do { + outb(port->port.xmit_buf[port->xmit_tail++], + port->ioaddr + UART_TX); + port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE - 1); + if (--port->xmit_cnt <= 0) + break; + } while (--count > 0); + mxvar_log.txcnt[tty->index] += (cnt - port->xmit_cnt); + + port->mon_data.txcnt += (cnt - port->xmit_cnt); + port->mon_data.up_txcnt += (cnt - port->xmit_cnt); + port->icount.tx += (cnt - port->xmit_cnt); + + if (port->xmit_cnt < WAKEUP_CHARS) + tty_wakeup(tty); + + if (port->xmit_cnt <= 0) { + port->IER &= ~UART_IER_THRI; + outb(port->IER, port->ioaddr + UART_IER); + } +} + +/* + * This is the serial driver's generic interrupt routine + */ +static irqreturn_t mxser_interrupt(int irq, void *dev_id) +{ + int status, iir, i; + struct mxser_board *brd = NULL; + struct mxser_port *port; + int max, irqbits, bits, msr; + unsigned int int_cnt, pass_counter = 0; + int handled = IRQ_NONE; + struct tty_struct *tty; + + for (i = 0; i < MXSER_BOARDS; i++) + if (dev_id == &mxser_boards[i]) { + brd = dev_id; + break; + } + + if (i == MXSER_BOARDS) + goto irq_stop; + if (brd == NULL) + goto irq_stop; + max = brd->info->nports; + while (pass_counter++ < MXSER_ISR_PASS_LIMIT) { + irqbits = inb(brd->vector) & brd->vector_mask; + if (irqbits == brd->vector_mask) + break; + + handled = IRQ_HANDLED; + for (i = 0, bits = 1; i < max; i++, irqbits |= bits, bits <<= 1) { + if (irqbits == brd->vector_mask) + break; + if (bits & irqbits) + continue; + port = &brd->ports[i]; + + int_cnt = 0; + spin_lock(&port->slock); + do { + iir = inb(port->ioaddr + UART_IIR); + if (iir & UART_IIR_NO_INT) + break; + iir &= MOXA_MUST_IIR_MASK; + tty = tty_port_tty_get(&port->port); + if (!tty || port->closing || + !tty_port_initialized(&port->port)) { + status = inb(port->ioaddr + UART_LSR); + outb(0x27, port->ioaddr + UART_FCR); + inb(port->ioaddr + UART_MSR); + tty_kref_put(tty); + break; + } + + status = inb(port->ioaddr + UART_LSR); + + if (status & UART_LSR_PE) + port->err_shadow |= NPPI_NOTIFY_PARITY; + if (status & UART_LSR_FE) + port->err_shadow |= NPPI_NOTIFY_FRAMING; + if (status & UART_LSR_OE) + port->err_shadow |= + NPPI_NOTIFY_HW_OVERRUN; + if (status & UART_LSR_BI) + port->err_shadow |= NPPI_NOTIFY_BREAK; + + if (port->board->chip_flag) { + if (iir == MOXA_MUST_IIR_GDA || + iir == MOXA_MUST_IIR_RDA || + iir == MOXA_MUST_IIR_RTO || + iir == MOXA_MUST_IIR_LSR) + mxser_receive_chars(tty, port, + &status); + + } else { + status &= port->read_status_mask; + if (status & UART_LSR_DR) + mxser_receive_chars(tty, port, + &status); + } + msr = inb(port->ioaddr + UART_MSR); + if (msr & UART_MSR_ANY_DELTA) + mxser_check_modem_status(tty, port, msr); + + if (port->board->chip_flag) { + if (iir == 0x02 && (status & + UART_LSR_THRE)) + mxser_transmit_chars(tty, port); + } else { + if (status & UART_LSR_THRE) + mxser_transmit_chars(tty, port); + } + tty_kref_put(tty); + } while (int_cnt++ < MXSER_ISR_PASS_LIMIT); + spin_unlock(&port->slock); + } + } + +irq_stop: + return handled; +} + +static const struct tty_operations mxser_ops = { + .open = mxser_open, + .close = mxser_close, + .write = mxser_write, + .put_char = mxser_put_char, + .flush_chars = mxser_flush_chars, + .write_room = mxser_write_room, + .chars_in_buffer = mxser_chars_in_buffer, + .flush_buffer = mxser_flush_buffer, + .ioctl = mxser_ioctl, + .throttle = mxser_throttle, + .unthrottle = mxser_unthrottle, + .set_termios = mxser_set_termios, + .stop = mxser_stop, + .start = mxser_start, + .hangup = mxser_hangup, + .break_ctl = mxser_rs_break, + .wait_until_sent = mxser_wait_until_sent, + .tiocmget = mxser_tiocmget, + .tiocmset = mxser_tiocmset, + .set_serial = mxser_set_serial_info, + .get_serial = mxser_get_serial_info, + .get_icount = mxser_get_icount, +}; + +static const struct tty_port_operations mxser_port_ops = { + .carrier_raised = mxser_carrier_raised, + .dtr_rts = mxser_dtr_rts, + .activate = mxser_activate, + .shutdown = mxser_shutdown_port, +}; + +/* + * The MOXA Smartio/Industio serial driver boot-time initialization code! + */ + +static bool allow_overlapping_vector; +module_param(allow_overlapping_vector, bool, S_IRUGO); +MODULE_PARM_DESC(allow_overlapping_vector, "whether we allow ISA cards to be configured such that vector overlabs IO ports (default=no)"); + +static bool mxser_overlapping_vector(struct mxser_board *brd) +{ + return allow_overlapping_vector && + brd->vector >= brd->ports[0].ioaddr && + brd->vector < brd->ports[0].ioaddr + 8 * brd->info->nports; +} + +static int mxser_request_vector(struct mxser_board *brd) +{ + if (mxser_overlapping_vector(brd)) + return 0; + return request_region(brd->vector, 1, "mxser(vector)") ? 0 : -EIO; +} + +static void mxser_release_vector(struct mxser_board *brd) +{ + if (mxser_overlapping_vector(brd)) + return; + release_region(brd->vector, 1); +} + +static void mxser_release_ISA_res(struct mxser_board *brd) +{ + release_region(brd->ports[0].ioaddr, 8 * brd->info->nports); + mxser_release_vector(brd); +} + +static int mxser_initbrd(struct mxser_board *brd) +{ + struct mxser_port *info; + unsigned int i; + int retval; + + printk(KERN_INFO "mxser: max. baud rate = %d bps\n", + brd->ports[0].max_baud); + + for (i = 0; i < brd->info->nports; i++) { + info = &brd->ports[i]; + tty_port_init(&info->port); + info->port.ops = &mxser_port_ops; + info->board = brd; + info->stop_rx = 0; + info->ldisc_stop_rx = 0; + + /* Enhance mode enabled here */ + if (brd->chip_flag != MOXA_OTHER_UART) + mxser_enable_must_enchance_mode(info->ioaddr); + + info->type = brd->uart_type; + + process_txrx_fifo(info); + + info->custom_divisor = info->baud_base * 16; + info->port.close_delay = 5 * HZ / 10; + info->port.closing_wait = 30 * HZ; + info->normal_termios = mxvar_sdriver->init_termios; + memset(&info->mon_data, 0, sizeof(struct mxser_mon)); + info->err_shadow = 0; + spin_lock_init(&info->slock); + + /* before set INT ISR, disable all int */ + outb(inb(info->ioaddr + UART_IER) & 0xf0, + info->ioaddr + UART_IER); + } + + retval = request_irq(brd->irq, mxser_interrupt, IRQF_SHARED, "mxser", + brd); + if (retval) { + for (i = 0; i < brd->info->nports; i++) + tty_port_destroy(&brd->ports[i].port); + printk(KERN_ERR "Board %s: Request irq failed, IRQ (%d) may " + "conflict with another device.\n", + brd->info->name, brd->irq); + } + + return retval; +} + +static void mxser_board_remove(struct mxser_board *brd) +{ + unsigned int i; + + for (i = 0; i < brd->info->nports; i++) { + tty_unregister_device(mxvar_sdriver, brd->idx + i); + tty_port_destroy(&brd->ports[i].port); + } + free_irq(brd->irq, brd); +} + +static int __init mxser_get_ISA_conf(int cap, struct mxser_board *brd) +{ + int id, i, bits, ret; + unsigned short regs[16], irq; + unsigned char scratch, scratch2; + + brd->chip_flag = MOXA_OTHER_UART; + + id = mxser_read_register(cap, regs); + switch (id) { + case C168_ASIC_ID: + brd->info = &mxser_cards[0]; + break; + case C104_ASIC_ID: + brd->info = &mxser_cards[1]; + break; + case CI104J_ASIC_ID: + brd->info = &mxser_cards[2]; + break; + case C102_ASIC_ID: + brd->info = &mxser_cards[5]; + break; + case CI132_ASIC_ID: + brd->info = &mxser_cards[6]; + break; + case CI134_ASIC_ID: + brd->info = &mxser_cards[7]; + break; + default: + return 0; + } + + irq = 0; + /* some ISA cards have 2 ports, but we want to see them as 4-port (why?) + Flag-hack checks if configuration should be read as 2-port here. */ + if (brd->info->nports == 2 || (brd->info->flags & MXSER_HAS2)) { + irq = regs[9] & 0xF000; + irq = irq | (irq >> 4); + if (irq != (regs[9] & 0xFF00)) + goto err_irqconflict; + } else if (brd->info->nports == 4) { + irq = regs[9] & 0xF000; + irq = irq | (irq >> 4); + irq = irq | (irq >> 8); + if (irq != regs[9]) + goto err_irqconflict; + } else if (brd->info->nports == 8) { + irq = regs[9] & 0xF000; + irq = irq | (irq >> 4); + irq = irq | (irq >> 8); + if ((irq != regs[9]) || (irq != regs[10])) + goto err_irqconflict; + } + + if (!irq) { + printk(KERN_ERR "mxser: interrupt number unset\n"); + return -EIO; + } + brd->irq = ((int)(irq & 0xF000) >> 12); + for (i = 0; i < 8; i++) + brd->ports[i].ioaddr = (int) regs[i + 1] & 0xFFF8; + if ((regs[12] & 0x80) == 0) { + printk(KERN_ERR "mxser: invalid interrupt vector\n"); + return -EIO; + } + brd->vector = (int)regs[11]; /* interrupt vector */ + if (id == 1) + brd->vector_mask = 0x00FF; + else + brd->vector_mask = 0x000F; + for (i = 7, bits = 0x0100; i >= 0; i--, bits <<= 1) { + if (regs[12] & bits) { + brd->ports[i].baud_base = 921600; + brd->ports[i].max_baud = 921600; + } else { + brd->ports[i].baud_base = 115200; + brd->ports[i].max_baud = 115200; + } + } + scratch2 = inb(cap + UART_LCR) & (~UART_LCR_DLAB); + outb(scratch2 | UART_LCR_DLAB, cap + UART_LCR); + outb(0, cap + UART_EFR); /* EFR is the same as FCR */ + outb(scratch2, cap + UART_LCR); + outb(UART_FCR_ENABLE_FIFO, cap + UART_FCR); + scratch = inb(cap + UART_IIR); + + if (scratch & 0xC0) + brd->uart_type = PORT_16550A; + else + brd->uart_type = PORT_16450; + if (!request_region(brd->ports[0].ioaddr, 8 * brd->info->nports, + "mxser(IO)")) { + printk(KERN_ERR "mxser: can't request ports I/O region: " + "0x%.8lx-0x%.8lx\n", + brd->ports[0].ioaddr, brd->ports[0].ioaddr + + 8 * brd->info->nports - 1); + return -EIO; + } + + ret = mxser_request_vector(brd); + if (ret) { + release_region(brd->ports[0].ioaddr, 8 * brd->info->nports); + printk(KERN_ERR "mxser: can't request interrupt vector region: " + "0x%.8lx-0x%.8lx\n", + brd->ports[0].ioaddr, brd->ports[0].ioaddr + + 8 * brd->info->nports - 1); + return ret; + } + return brd->info->nports; + +err_irqconflict: + printk(KERN_ERR "mxser: invalid interrupt number\n"); + return -EIO; +} + +static int mxser_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ +#ifdef CONFIG_PCI + struct mxser_board *brd; + unsigned int i, j; + unsigned long ioaddress; + struct device *tty_dev; + int retval = -EINVAL; + + for (i = 0; i < MXSER_BOARDS; i++) + if (mxser_boards[i].info == NULL) + break; + + if (i >= MXSER_BOARDS) { + dev_err(&pdev->dev, "too many boards found (maximum %d), board " + "not configured\n", MXSER_BOARDS); + goto err; + } + + brd = &mxser_boards[i]; + brd->idx = i * MXSER_PORTS_PER_BOARD; + dev_info(&pdev->dev, "found MOXA %s board (BusNo=%d, DevNo=%d)\n", + mxser_cards[ent->driver_data].name, + pdev->bus->number, PCI_SLOT(pdev->devfn)); + + retval = pci_enable_device(pdev); + if (retval) { + dev_err(&pdev->dev, "PCI enable failed\n"); + goto err; + } + + /* io address */ + ioaddress = pci_resource_start(pdev, 2); + retval = pci_request_region(pdev, 2, "mxser(IO)"); + if (retval) + goto err_dis; + + brd->info = &mxser_cards[ent->driver_data]; + for (i = 0; i < brd->info->nports; i++) + brd->ports[i].ioaddr = ioaddress + 8 * i; + + /* vector */ + ioaddress = pci_resource_start(pdev, 3); + retval = pci_request_region(pdev, 3, "mxser(vector)"); + if (retval) + goto err_zero; + brd->vector = ioaddress; + + /* irq */ + brd->irq = pdev->irq; + + brd->chip_flag = CheckIsMoxaMust(brd->ports[0].ioaddr); + brd->uart_type = PORT_16550A; + brd->vector_mask = 0; + + for (i = 0; i < brd->info->nports; i++) { + for (j = 0; j < UART_INFO_NUM; j++) { + if (Gpci_uart_info[j].type == brd->chip_flag) { + brd->ports[i].max_baud = + Gpci_uart_info[j].max_baud; + + /* exception....CP-102 */ + if (brd->info->flags & MXSER_HIGHBAUD) + brd->ports[i].max_baud = 921600; + break; + } + } + } + + if (brd->chip_flag == MOXA_MUST_MU860_HWID) { + for (i = 0; i < brd->info->nports; i++) { + if (i < 4) + brd->ports[i].opmode_ioaddr = ioaddress + 4; + else + brd->ports[i].opmode_ioaddr = ioaddress + 0x0c; + } + outb(0, ioaddress + 4); /* default set to RS232 mode */ + outb(0, ioaddress + 0x0c); /* default set to RS232 mode */ + } + + for (i = 0; i < brd->info->nports; i++) { + brd->vector_mask |= (1 << i); + brd->ports[i].baud_base = 921600; + } + + /* mxser_initbrd will hook ISR. */ + retval = mxser_initbrd(brd); + if (retval) + goto err_rel3; + + for (i = 0; i < brd->info->nports; i++) { + tty_dev = tty_port_register_device(&brd->ports[i].port, + mxvar_sdriver, brd->idx + i, &pdev->dev); + if (IS_ERR(tty_dev)) { + retval = PTR_ERR(tty_dev); + for (; i > 0; i--) + tty_unregister_device(mxvar_sdriver, + brd->idx + i - 1); + goto err_relbrd; + } + } + + pci_set_drvdata(pdev, brd); + + return 0; +err_relbrd: + for (i = 0; i < brd->info->nports; i++) + tty_port_destroy(&brd->ports[i].port); + free_irq(brd->irq, brd); +err_rel3: + pci_release_region(pdev, 3); +err_zero: + brd->info = NULL; + pci_release_region(pdev, 2); +err_dis: + pci_disable_device(pdev); +err: + return retval; +#else + return -ENODEV; +#endif +} + +static void mxser_remove(struct pci_dev *pdev) +{ +#ifdef CONFIG_PCI + struct mxser_board *brd = pci_get_drvdata(pdev); + + mxser_board_remove(brd); + + pci_release_region(pdev, 2); + pci_release_region(pdev, 3); + pci_disable_device(pdev); + brd->info = NULL; +#endif +} + +static struct pci_driver mxser_driver = { + .name = "mxser", + .id_table = mxser_pcibrds, + .probe = mxser_probe, + .remove = mxser_remove +}; + +static int __init mxser_module_init(void) +{ + struct mxser_board *brd; + struct device *tty_dev; + unsigned int b, i, m; + int retval; + + mxvar_sdriver = alloc_tty_driver(MXSER_PORTS + 1); + if (!mxvar_sdriver) + return -ENOMEM; + + printk(KERN_INFO "MOXA Smartio/Industio family driver version %s\n", + MXSER_VERSION); + + /* Initialize the tty_driver structure */ + mxvar_sdriver->name = "ttyMI"; + mxvar_sdriver->major = ttymajor; + mxvar_sdriver->minor_start = 0; + mxvar_sdriver->type = TTY_DRIVER_TYPE_SERIAL; + mxvar_sdriver->subtype = SERIAL_TYPE_NORMAL; + mxvar_sdriver->init_termios = tty_std_termios; + mxvar_sdriver->init_termios.c_cflag = B9600|CS8|CREAD|HUPCL|CLOCAL; + mxvar_sdriver->flags = TTY_DRIVER_REAL_RAW|TTY_DRIVER_DYNAMIC_DEV; + tty_set_operations(mxvar_sdriver, &mxser_ops); + + retval = tty_register_driver(mxvar_sdriver); + if (retval) { + printk(KERN_ERR "Couldn't install MOXA Smartio/Industio family " + "tty driver !\n"); + goto err_put; + } + + /* Start finding ISA boards here */ + for (m = 0, b = 0; b < MXSER_BOARDS; b++) { + if (!ioaddr[b]) + continue; + + brd = &mxser_boards[m]; + retval = mxser_get_ISA_conf(ioaddr[b], brd); + if (retval <= 0) { + brd->info = NULL; + continue; + } + + printk(KERN_INFO "mxser: found MOXA %s board (CAP=0x%lx)\n", + brd->info->name, ioaddr[b]); + + /* mxser_initbrd will hook ISR. */ + if (mxser_initbrd(brd) < 0) { + mxser_release_ISA_res(brd); + brd->info = NULL; + continue; + } + + brd->idx = m * MXSER_PORTS_PER_BOARD; + for (i = 0; i < brd->info->nports; i++) { + tty_dev = tty_port_register_device(&brd->ports[i].port, + mxvar_sdriver, brd->idx + i, NULL); + if (IS_ERR(tty_dev)) { + for (; i > 0; i--) + tty_unregister_device(mxvar_sdriver, + brd->idx + i - 1); + for (i = 0; i < brd->info->nports; i++) + tty_port_destroy(&brd->ports[i].port); + free_irq(brd->irq, brd); + mxser_release_ISA_res(brd); + brd->info = NULL; + break; + } + } + if (brd->info == NULL) + continue; + + m++; + } + + retval = pci_register_driver(&mxser_driver); + if (retval) { + printk(KERN_ERR "mxser: can't register pci driver\n"); + if (!m) { + retval = -ENODEV; + goto err_unr; + } /* else: we have some ISA cards under control */ + } + + return 0; +err_unr: + tty_unregister_driver(mxvar_sdriver); +err_put: + put_tty_driver(mxvar_sdriver); + return retval; +} + +static void __exit mxser_module_exit(void) +{ + unsigned int i; + + pci_unregister_driver(&mxser_driver); + + for (i = 0; i < MXSER_BOARDS; i++) /* ISA remains */ + if (mxser_boards[i].info != NULL) + mxser_board_remove(&mxser_boards[i]); + tty_unregister_driver(mxvar_sdriver); + put_tty_driver(mxvar_sdriver); + + for (i = 0; i < MXSER_BOARDS; i++) + if (mxser_boards[i].info != NULL) + mxser_release_ISA_res(&mxser_boards[i]); +} + +module_init(mxser_module_init); +module_exit(mxser_module_exit); diff --git a/drivers/tty/mxser.h b/drivers/tty/mxser.h new file mode 100644 index 000000000..e6cb15626 --- /dev/null +++ b/drivers/tty/mxser.h @@ -0,0 +1,151 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _MXSER_H +#define _MXSER_H + +/* + * Semi-public control interfaces + */ + +/* + * MOXA ioctls + */ + +#define MOXA 0x400 +#define MOXA_GETDATACOUNT (MOXA + 23) +#define MOXA_DIAGNOSE (MOXA + 50) +#define MOXA_CHKPORTENABLE (MOXA + 60) +#define MOXA_HighSpeedOn (MOXA + 61) +#define MOXA_GET_MAJOR (MOXA + 63) +#define MOXA_GETMSTATUS (MOXA + 65) +#define MOXA_SET_OP_MODE (MOXA + 66) +#define MOXA_GET_OP_MODE (MOXA + 67) + +#define RS232_MODE 0 +#define RS485_2WIRE_MODE 1 +#define RS422_MODE 2 +#define RS485_4WIRE_MODE 3 +#define OP_MODE_MASK 3 + +#define MOXA_SDS_RSTICOUNTER (MOXA + 69) +#define MOXA_ASPP_OQUEUE (MOXA + 70) +#define MOXA_ASPP_MON (MOXA + 73) +#define MOXA_ASPP_LSTATUS (MOXA + 74) +#define MOXA_ASPP_MON_EXT (MOXA + 75) +#define MOXA_SET_BAUD_METHOD (MOXA + 76) + +/* --------------------------------------------------- */ + +#define NPPI_NOTIFY_PARITY 0x01 +#define NPPI_NOTIFY_FRAMING 0x02 +#define NPPI_NOTIFY_HW_OVERRUN 0x04 +#define NPPI_NOTIFY_SW_OVERRUN 0x08 +#define NPPI_NOTIFY_BREAK 0x10 + +#define NPPI_NOTIFY_CTSHOLD 0x01 /* Tx hold by CTS low */ +#define NPPI_NOTIFY_DSRHOLD 0x02 /* Tx hold by DSR low */ +#define NPPI_NOTIFY_XOFFHOLD 0x08 /* Tx hold by Xoff received */ +#define NPPI_NOTIFY_XOFFXENT 0x10 /* Xoff Sent */ + +/* follow just for Moxa Must chip define. */ +/* */ +/* when LCR register (offset 0x03) write following value, */ +/* the Must chip will enter enchance mode. And write value */ +/* on EFR (offset 0x02) bit 6,7 to change bank. */ +#define MOXA_MUST_ENTER_ENCHANCE 0xBF + +/* when enhance mode enable, access on general bank register */ +#define MOXA_MUST_GDL_REGISTER 0x07 +#define MOXA_MUST_GDL_MASK 0x7F +#define MOXA_MUST_GDL_HAS_BAD_DATA 0x80 + +#define MOXA_MUST_LSR_RERR 0x80 /* error in receive FIFO */ +/* enchance register bank select and enchance mode setting register */ +/* when LCR register equal to 0xBF */ +#define MOXA_MUST_EFR_REGISTER 0x02 +/* enchance mode enable */ +#define MOXA_MUST_EFR_EFRB_ENABLE 0x10 +/* enchance reister bank set 0, 1, 2 */ +#define MOXA_MUST_EFR_BANK0 0x00 +#define MOXA_MUST_EFR_BANK1 0x40 +#define MOXA_MUST_EFR_BANK2 0x80 +#define MOXA_MUST_EFR_BANK3 0xC0 +#define MOXA_MUST_EFR_BANK_MASK 0xC0 + +/* set XON1 value register, when LCR=0xBF and change to bank0 */ +#define MOXA_MUST_XON1_REGISTER 0x04 + +/* set XON2 value register, when LCR=0xBF and change to bank0 */ +#define MOXA_MUST_XON2_REGISTER 0x05 + +/* set XOFF1 value register, when LCR=0xBF and change to bank0 */ +#define MOXA_MUST_XOFF1_REGISTER 0x06 + +/* set XOFF2 value register, when LCR=0xBF and change to bank0 */ +#define MOXA_MUST_XOFF2_REGISTER 0x07 + +#define MOXA_MUST_RBRTL_REGISTER 0x04 +#define MOXA_MUST_RBRTH_REGISTER 0x05 +#define MOXA_MUST_RBRTI_REGISTER 0x06 +#define MOXA_MUST_THRTL_REGISTER 0x07 +#define MOXA_MUST_ENUM_REGISTER 0x04 +#define MOXA_MUST_HWID_REGISTER 0x05 +#define MOXA_MUST_ECR_REGISTER 0x06 +#define MOXA_MUST_CSR_REGISTER 0x07 + +/* good data mode enable */ +#define MOXA_MUST_FCR_GDA_MODE_ENABLE 0x20 +/* only good data put into RxFIFO */ +#define MOXA_MUST_FCR_GDA_ONLY_ENABLE 0x10 + +/* enable CTS interrupt */ +#define MOXA_MUST_IER_ECTSI 0x80 +/* enable RTS interrupt */ +#define MOXA_MUST_IER_ERTSI 0x40 +/* enable Xon/Xoff interrupt */ +#define MOXA_MUST_IER_XINT 0x20 +/* enable GDA interrupt */ +#define MOXA_MUST_IER_EGDAI 0x10 + +#define MOXA_MUST_RECV_ISR (UART_IER_RDI | MOXA_MUST_IER_EGDAI) + +/* GDA interrupt pending */ +#define MOXA_MUST_IIR_GDA 0x1C +#define MOXA_MUST_IIR_RDA 0x04 +#define MOXA_MUST_IIR_RTO 0x0C +#define MOXA_MUST_IIR_LSR 0x06 + +/* received Xon/Xoff or specical interrupt pending */ +#define MOXA_MUST_IIR_XSC 0x10 + +/* RTS/CTS change state interrupt pending */ +#define MOXA_MUST_IIR_RTSCTS 0x20 +#define MOXA_MUST_IIR_MASK 0x3E + +#define MOXA_MUST_MCR_XON_FLAG 0x40 +#define MOXA_MUST_MCR_XON_ANY 0x80 +#define MOXA_MUST_MCR_TX_XON 0x08 + +/* software flow control on chip mask value */ +#define MOXA_MUST_EFR_SF_MASK 0x0F +/* send Xon1/Xoff1 */ +#define MOXA_MUST_EFR_SF_TX1 0x08 +/* send Xon2/Xoff2 */ +#define MOXA_MUST_EFR_SF_TX2 0x04 +/* send Xon1,Xon2/Xoff1,Xoff2 */ +#define MOXA_MUST_EFR_SF_TX12 0x0C +/* don't send Xon/Xoff */ +#define MOXA_MUST_EFR_SF_TX_NO 0x00 +/* Tx software flow control mask */ +#define MOXA_MUST_EFR_SF_TX_MASK 0x0C +/* don't receive Xon/Xoff */ +#define MOXA_MUST_EFR_SF_RX_NO 0x00 +/* receive Xon1/Xoff1 */ +#define MOXA_MUST_EFR_SF_RX1 0x02 +/* receive Xon2/Xoff2 */ +#define MOXA_MUST_EFR_SF_RX2 0x01 +/* receive Xon1,Xon2/Xoff1,Xoff2 */ +#define MOXA_MUST_EFR_SF_RX12 0x03 +/* Rx software flow control mask */ +#define MOXA_MUST_EFR_SF_RX_MASK 0x03 + +#endif diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c new file mode 100644 index 000000000..fa4952968 --- /dev/null +++ b/drivers/tty/n_gsm.c @@ -0,0 +1,3477 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * n_gsm.c GSM 0710 tty multiplexor + * Copyright (c) 2009/10 Intel Corporation + * + * * THIS IS A DEVELOPMENT SNAPSHOT IT IS NOT A FINAL RELEASE * + * + * TO DO: + * Mostly done: ioctls for setting modes/timing + * Partly done: hooks so you can pull off frames to non tty devs + * Restart DLCI 0 when it closes ? + * Improve the tx engine + * Resolve tx side locking by adding a queue_head and routing + * all control traffic via it + * General tidy/document + * Review the locking/move to refcounts more (mux now moved to an + * alloc/free model ready) + * Use newest tty open/close port helpers and install hooks + * What to do about power functions ? + * Termios setting and negotiation + * Do we need a 'which mux are you' ioctl to correlate mux and tty sets + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "tty.h" + +static int debug; +module_param(debug, int, 0600); + +/* Defaults: these are from the specification */ + +#define T1 10 /* 100mS */ +#define T2 34 /* 333mS */ +#define N2 3 /* Retry 3 times */ + +/* Use long timers for testing at low speed with debug on */ +#ifdef DEBUG_TIMING +#define T1 100 +#define T2 200 +#endif + +/* + * Semi-arbitrary buffer size limits. 0710 is normally run with 32-64 byte + * limits so this is plenty + */ +#define MAX_MRU 1500 +#define MAX_MTU 1500 +/* SOF, ADDR, CTRL, LEN1, LEN2, ..., FCS, EOF */ +#define PROT_OVERHEAD 7 +#define GSM_NET_TX_TIMEOUT (HZ*10) + +/** + * struct gsm_mux_net - network interface + * + * Created when net interface is initialized. + */ +struct gsm_mux_net { + struct kref ref; + struct gsm_dlci *dlci; +}; + +/* + * Each block of data we have queued to go out is in the form of + * a gsm_msg which holds everything we need in a link layer independent + * format + */ + +struct gsm_msg { + struct list_head list; + u8 addr; /* DLCI address + flags */ + u8 ctrl; /* Control byte + flags */ + unsigned int len; /* Length of data block (can be zero) */ + unsigned char *data; /* Points into buffer but not at the start */ + unsigned char buffer[]; +}; + +enum gsm_dlci_state { + DLCI_CLOSED, + DLCI_OPENING, /* Sending SABM not seen UA */ + DLCI_OPEN, /* SABM/UA complete */ + DLCI_CLOSING, /* Sending DISC not seen UA/DM */ +}; + +enum gsm_dlci_mode { + DLCI_MODE_ABM, /* Normal Asynchronous Balanced Mode */ + DLCI_MODE_ADM, /* Asynchronous Disconnected Mode */ +}; + +/* + * Each active data link has a gsm_dlci structure associated which ties + * the link layer to an optional tty (if the tty side is open). To avoid + * complexity right now these are only ever freed up when the mux is + * shut down. + * + * At the moment we don't free DLCI objects until the mux is torn down + * this avoid object life time issues but might be worth review later. + */ + +struct gsm_dlci { + struct gsm_mux *gsm; + int addr; + enum gsm_dlci_state state; + struct mutex mutex; + + /* Link layer */ + enum gsm_dlci_mode mode; + spinlock_t lock; /* Protects the internal state */ + struct timer_list t1; /* Retransmit timer for SABM and UA */ + int retries; + /* Uplink tty if active */ + struct tty_port port; /* The tty bound to this DLCI if there is one */ + struct kfifo fifo; /* Queue fifo for the DLCI */ + int adaption; /* Adaption layer in use */ + int prev_adaption; + u32 modem_rx; /* Our incoming virtual modem lines */ + u32 modem_tx; /* Our outgoing modem lines */ + bool dead; /* Refuse re-open */ + /* Flow control */ + bool throttled; /* Private copy of throttle state */ + bool constipated; /* Throttle status for outgoing */ + /* Packetised I/O */ + struct sk_buff *skb; /* Frame being sent */ + struct sk_buff_head skb_list; /* Queued frames */ + /* Data handling callback */ + void (*data)(struct gsm_dlci *dlci, const u8 *data, int len); + void (*prev_data)(struct gsm_dlci *dlci, const u8 *data, int len); + struct net_device *net; /* network interface, if created */ +}; + +/* DLCI 0, 62/63 are special or reserved see gsmtty_open */ + +#define NUM_DLCI 64 + +/* + * DLCI 0 is used to pass control blocks out of band of the data + * flow (and with a higher link priority). One command can be outstanding + * at a time and we use this structure to manage them. They are created + * and destroyed by the user context, and updated by the receive paths + * and timers + */ + +struct gsm_control { + u8 cmd; /* Command we are issuing */ + u8 *data; /* Data for the command in case we retransmit */ + int len; /* Length of block for retransmission */ + int done; /* Done flag */ + int error; /* Error if any */ +}; + +enum gsm_mux_state { + GSM_SEARCH, + GSM_START, + GSM_ADDRESS, + GSM_CONTROL, + GSM_LEN, + GSM_DATA, + GSM_FCS, + GSM_OVERRUN, + GSM_LEN0, + GSM_LEN1, + GSM_SSOF, +}; + +/* + * Each GSM mux we have is represented by this structure. If we are + * operating as an ldisc then we use this structure as our ldisc + * state. We need to sort out lifetimes and locking with respect + * to the gsm mux array. For now we don't free DLCI objects that + * have been instantiated until the mux itself is terminated. + * + * To consider further: tty open versus mux shutdown. + */ + +struct gsm_mux { + struct tty_struct *tty; /* The tty our ldisc is bound to */ + spinlock_t lock; + struct mutex mutex; + unsigned int num; + struct kref ref; + + /* Events on the GSM channel */ + wait_queue_head_t event; + + /* Bits for GSM mode decoding */ + + /* Framing Layer */ + unsigned char *buf; + enum gsm_mux_state state; + unsigned int len; + unsigned int address; + unsigned int count; + bool escape; + int encoding; + u8 control; + u8 fcs; + u8 received_fcs; + u8 *txframe; /* TX framing buffer */ + + /* Method for the receiver side */ + void (*receive)(struct gsm_mux *gsm, u8 ch); + + /* Link Layer */ + unsigned int mru; + unsigned int mtu; + int initiator; /* Did we initiate connection */ + bool dead; /* Has the mux been shut down */ + struct gsm_dlci *dlci[NUM_DLCI]; + int old_c_iflag; /* termios c_iflag value before attach */ + bool constipated; /* Asked by remote to shut up */ + bool has_devices; /* Devices were registered */ + + spinlock_t tx_lock; + unsigned int tx_bytes; /* TX data outstanding */ +#define TX_THRESH_HI 8192 +#define TX_THRESH_LO 2048 + struct list_head tx_list; /* Pending data packets */ + + /* Control messages */ + struct timer_list t2_timer; /* Retransmit timer for commands */ + int cretries; /* Command retry counter */ + struct gsm_control *pending_cmd;/* Our current pending command */ + spinlock_t control_lock; /* Protects the pending command */ + + /* Configuration */ + int adaption; /* 1 or 2 supported */ + u8 ftype; /* UI or UIH */ + int t1, t2; /* Timers in 1/100th of a sec */ + int n2; /* Retry count */ + + /* Statistics (not currently exposed) */ + unsigned long bad_fcs; + unsigned long malformed; + unsigned long io_error; + unsigned long bad_size; + unsigned long unsupported; +}; + + +/* + * Mux objects - needed so that we can translate a tty index into the + * relevant mux and DLCI. + */ + +#define MAX_MUX 4 /* 256 minors */ +static struct gsm_mux *gsm_mux[MAX_MUX]; /* GSM muxes */ +static spinlock_t gsm_mux_lock; + +static struct tty_driver *gsm_tty_driver; + +/* + * This section of the driver logic implements the GSM encodings + * both the basic and the 'advanced'. Reliable transport is not + * supported. + */ + +#define CR 0x02 +#define EA 0x01 +#define PF 0x10 + +/* I is special: the rest are ..*/ +#define RR 0x01 +#define UI 0x03 +#define RNR 0x05 +#define REJ 0x09 +#define DM 0x0F +#define SABM 0x2F +#define DISC 0x43 +#define UA 0x63 +#define UIH 0xEF + +/* Channel commands */ +#define CMD_NSC 0x09 +#define CMD_TEST 0x11 +#define CMD_PSC 0x21 +#define CMD_RLS 0x29 +#define CMD_FCOFF 0x31 +#define CMD_PN 0x41 +#define CMD_RPN 0x49 +#define CMD_FCON 0x51 +#define CMD_CLD 0x61 +#define CMD_SNC 0x69 +#define CMD_MSC 0x71 + +/* Virtual modem bits */ +#define MDM_FC 0x01 +#define MDM_RTC 0x02 +#define MDM_RTR 0x04 +#define MDM_IC 0x20 +#define MDM_DV 0x40 + +#define GSM0_SOF 0xF9 +#define GSM1_SOF 0x7E +#define GSM1_ESCAPE 0x7D +#define GSM1_ESCAPE_BITS 0x20 +#define XON 0x11 +#define XOFF 0x13 +#define ISO_IEC_646_MASK 0x7F + +static const struct tty_port_operations gsm_port_ops; + +/* + * CRC table for GSM 0710 + */ + +static const u8 gsm_fcs8[256] = { + 0x00, 0x91, 0xE3, 0x72, 0x07, 0x96, 0xE4, 0x75, + 0x0E, 0x9F, 0xED, 0x7C, 0x09, 0x98, 0xEA, 0x7B, + 0x1C, 0x8D, 0xFF, 0x6E, 0x1B, 0x8A, 0xF8, 0x69, + 0x12, 0x83, 0xF1, 0x60, 0x15, 0x84, 0xF6, 0x67, + 0x38, 0xA9, 0xDB, 0x4A, 0x3F, 0xAE, 0xDC, 0x4D, + 0x36, 0xA7, 0xD5, 0x44, 0x31, 0xA0, 0xD2, 0x43, + 0x24, 0xB5, 0xC7, 0x56, 0x23, 0xB2, 0xC0, 0x51, + 0x2A, 0xBB, 0xC9, 0x58, 0x2D, 0xBC, 0xCE, 0x5F, + 0x70, 0xE1, 0x93, 0x02, 0x77, 0xE6, 0x94, 0x05, + 0x7E, 0xEF, 0x9D, 0x0C, 0x79, 0xE8, 0x9A, 0x0B, + 0x6C, 0xFD, 0x8F, 0x1E, 0x6B, 0xFA, 0x88, 0x19, + 0x62, 0xF3, 0x81, 0x10, 0x65, 0xF4, 0x86, 0x17, + 0x48, 0xD9, 0xAB, 0x3A, 0x4F, 0xDE, 0xAC, 0x3D, + 0x46, 0xD7, 0xA5, 0x34, 0x41, 0xD0, 0xA2, 0x33, + 0x54, 0xC5, 0xB7, 0x26, 0x53, 0xC2, 0xB0, 0x21, + 0x5A, 0xCB, 0xB9, 0x28, 0x5D, 0xCC, 0xBE, 0x2F, + 0xE0, 0x71, 0x03, 0x92, 0xE7, 0x76, 0x04, 0x95, + 0xEE, 0x7F, 0x0D, 0x9C, 0xE9, 0x78, 0x0A, 0x9B, + 0xFC, 0x6D, 0x1F, 0x8E, 0xFB, 0x6A, 0x18, 0x89, + 0xF2, 0x63, 0x11, 0x80, 0xF5, 0x64, 0x16, 0x87, + 0xD8, 0x49, 0x3B, 0xAA, 0xDF, 0x4E, 0x3C, 0xAD, + 0xD6, 0x47, 0x35, 0xA4, 0xD1, 0x40, 0x32, 0xA3, + 0xC4, 0x55, 0x27, 0xB6, 0xC3, 0x52, 0x20, 0xB1, + 0xCA, 0x5B, 0x29, 0xB8, 0xCD, 0x5C, 0x2E, 0xBF, + 0x90, 0x01, 0x73, 0xE2, 0x97, 0x06, 0x74, 0xE5, + 0x9E, 0x0F, 0x7D, 0xEC, 0x99, 0x08, 0x7A, 0xEB, + 0x8C, 0x1D, 0x6F, 0xFE, 0x8B, 0x1A, 0x68, 0xF9, + 0x82, 0x13, 0x61, 0xF0, 0x85, 0x14, 0x66, 0xF7, + 0xA8, 0x39, 0x4B, 0xDA, 0xAF, 0x3E, 0x4C, 0xDD, + 0xA6, 0x37, 0x45, 0xD4, 0xA1, 0x30, 0x42, 0xD3, + 0xB4, 0x25, 0x57, 0xC6, 0xB3, 0x22, 0x50, 0xC1, + 0xBA, 0x2B, 0x59, 0xC8, 0xBD, 0x2C, 0x5E, 0xCF +}; + +#define INIT_FCS 0xFF +#define GOOD_FCS 0xCF + +static int gsmld_output(struct gsm_mux *gsm, u8 *data, int len); + +/** + * gsm_fcs_add - update FCS + * @fcs: Current FCS + * @c: Next data + * + * Update the FCS to include c. Uses the algorithm in the specification + * notes. + */ + +static inline u8 gsm_fcs_add(u8 fcs, u8 c) +{ + return gsm_fcs8[fcs ^ c]; +} + +/** + * gsm_fcs_add_block - update FCS for a block + * @fcs: Current FCS + * @c: buffer of data + * @len: length of buffer + * + * Update the FCS to include c. Uses the algorithm in the specification + * notes. + */ + +static inline u8 gsm_fcs_add_block(u8 fcs, u8 *c, int len) +{ + while (len--) + fcs = gsm_fcs8[fcs ^ *c++]; + return fcs; +} + +/** + * gsm_read_ea - read a byte into an EA + * @val: variable holding value + * @c: byte going into the EA + * + * Processes one byte of an EA. Updates the passed variable + * and returns 1 if the EA is now completely read + */ + +static int gsm_read_ea(unsigned int *val, u8 c) +{ + /* Add the next 7 bits into the value */ + *val <<= 7; + *val |= c >> 1; + /* Was this the last byte of the EA 1 = yes*/ + return c & EA; +} + +/** + * gsm_read_ea_val - read a value until EA + * @val: variable holding value + * @data: buffer of data + * @dlen: length of data + * + * Processes an EA value. Updates the passed variable and + * returns the processed data length. + */ +static unsigned int gsm_read_ea_val(unsigned int *val, const u8 *data, int dlen) +{ + unsigned int len = 0; + + for (; dlen > 0; dlen--) { + len++; + if (gsm_read_ea(val, *data++)) + break; + } + return len; +} + +/** + * gsm_encode_modem - encode modem data bits + * @dlci: DLCI to encode from + * + * Returns the correct GSM encoded modem status bits (6 bit field) for + * the current status of the DLCI and attached tty object + */ + +static u8 gsm_encode_modem(const struct gsm_dlci *dlci) +{ + u8 modembits = 0; + /* FC is true flow control not modem bits */ + if (dlci->throttled) + modembits |= MDM_FC; + if (dlci->modem_tx & TIOCM_DTR) + modembits |= MDM_RTC; + if (dlci->modem_tx & TIOCM_RTS) + modembits |= MDM_RTR; + if (dlci->modem_tx & TIOCM_RI) + modembits |= MDM_IC; + if (dlci->modem_tx & TIOCM_CD || dlci->gsm->initiator) + modembits |= MDM_DV; + return modembits; +} + +/** + * gsm_register_devices - register all tty devices for a given mux index + * + * @driver: the tty driver that describes the tty devices + * @index: the mux number is used to calculate the minor numbers of the + * ttys for this mux and may differ from the position in the + * mux array. + */ +static int gsm_register_devices(struct tty_driver *driver, unsigned int index) +{ + struct device *dev; + int i; + unsigned int base; + + if (!driver || index >= MAX_MUX) + return -EINVAL; + + base = index * NUM_DLCI; /* first minor for this index */ + for (i = 1; i < NUM_DLCI; i++) { + /* Don't register device 0 - this is the control channel + * and not a usable tty interface + */ + dev = tty_register_device(gsm_tty_driver, base + i, NULL); + if (IS_ERR(dev)) { + if (debug & 8) + pr_info("%s failed to register device minor %u", + __func__, base + i); + for (i--; i >= 1; i--) + tty_unregister_device(gsm_tty_driver, base + i); + return PTR_ERR(dev); + } + } + + return 0; +} + +/** + * gsm_unregister_devices - unregister all tty devices for a given mux index + * + * @driver: the tty driver that describes the tty devices + * @index: the mux number is used to calculate the minor numbers of the + * ttys for this mux and may differ from the position in the + * mux array. + */ +static void gsm_unregister_devices(struct tty_driver *driver, + unsigned int index) +{ + int i; + unsigned int base; + + if (!driver || index >= MAX_MUX) + return; + + base = index * NUM_DLCI; /* first minor for this index */ + for (i = 1; i < NUM_DLCI; i++) { + /* Don't unregister device 0 - this is the control + * channel and not a usable tty interface + */ + tty_unregister_device(gsm_tty_driver, base + i); + } +} + +/** + * gsm_print_packet - display a frame for debug + * @hdr: header to print before decode + * @addr: address EA from the frame + * @cr: C/R bit from the frame + * @control: control including PF bit + * @data: following data bytes + * @dlen: length of data + * + * Displays a packet in human readable format for debugging purposes. The + * style is based on amateur radio LAP-B dump display. + */ + +static void gsm_print_packet(const char *hdr, int addr, int cr, + u8 control, const u8 *data, int dlen) +{ + if (!(debug & 1)) + return; + + pr_info("%s %d) %c: ", hdr, addr, "RC"[cr]); + + switch (control & ~PF) { + case SABM: + pr_cont("SABM"); + break; + case UA: + pr_cont("UA"); + break; + case DISC: + pr_cont("DISC"); + break; + case DM: + pr_cont("DM"); + break; + case UI: + pr_cont("UI"); + break; + case UIH: + pr_cont("UIH"); + break; + default: + if (!(control & 0x01)) { + pr_cont("I N(S)%d N(R)%d", + (control & 0x0E) >> 1, (control & 0xE0) >> 5); + } else switch (control & 0x0F) { + case RR: + pr_cont("RR(%d)", (control & 0xE0) >> 5); + break; + case RNR: + pr_cont("RNR(%d)", (control & 0xE0) >> 5); + break; + case REJ: + pr_cont("REJ(%d)", (control & 0xE0) >> 5); + break; + default: + pr_cont("[%02X]", control); + } + } + + if (control & PF) + pr_cont("(P)"); + else + pr_cont("(F)"); + + print_hex_dump_bytes("", DUMP_PREFIX_NONE, data, dlen); +} + + +/* + * Link level transmission side + */ + +/** + * gsm_stuff_packet - bytestuff a packet + * @input: input buffer + * @output: output buffer + * @len: length of input + * + * Expand a buffer by bytestuffing it. The worst case size change + * is doubling and the caller is responsible for handing out + * suitable sized buffers. + */ + +static int gsm_stuff_frame(const u8 *input, u8 *output, int len) +{ + int olen = 0; + while (len--) { + if (*input == GSM1_SOF || *input == GSM1_ESCAPE + || (*input & ISO_IEC_646_MASK) == XON + || (*input & ISO_IEC_646_MASK) == XOFF) { + *output++ = GSM1_ESCAPE; + *output++ = *input++ ^ GSM1_ESCAPE_BITS; + olen++; + } else + *output++ = *input++; + olen++; + } + return olen; +} + +/** + * gsm_send - send a control frame + * @gsm: our GSM mux + * @addr: address for control frame + * @cr: command/response bit + * @control: control byte including PF bit + * + * Format up and transmit a control frame. These do not go via the + * queueing logic as they should be transmitted ahead of data when + * they are needed. + * + * FIXME: Lock versus data TX path + */ + +static void gsm_send(struct gsm_mux *gsm, int addr, int cr, int control) +{ + int len; + u8 cbuf[10]; + u8 ibuf[3]; + + switch (gsm->encoding) { + case 0: + cbuf[0] = GSM0_SOF; + cbuf[1] = (addr << 2) | (cr << 1) | EA; + cbuf[2] = control; + cbuf[3] = EA; /* Length of data = 0 */ + cbuf[4] = 0xFF - gsm_fcs_add_block(INIT_FCS, cbuf + 1, 3); + cbuf[5] = GSM0_SOF; + len = 6; + break; + case 1: + case 2: + /* Control frame + packing (but not frame stuffing) in mode 1 */ + ibuf[0] = (addr << 2) | (cr << 1) | EA; + ibuf[1] = control; + ibuf[2] = 0xFF - gsm_fcs_add_block(INIT_FCS, ibuf, 2); + /* Stuffing may double the size worst case */ + len = gsm_stuff_frame(ibuf, cbuf + 1, 3); + /* Now add the SOF markers */ + cbuf[0] = GSM1_SOF; + cbuf[len + 1] = GSM1_SOF; + /* FIXME: we can omit the lead one in many cases */ + len += 2; + break; + default: + WARN_ON(1); + return; + } + gsmld_output(gsm, cbuf, len); + gsm_print_packet("-->", addr, cr, control, NULL, 0); +} + +/** + * gsm_response - send a control response + * @gsm: our GSM mux + * @addr: address for control frame + * @control: control byte including PF bit + * + * Format up and transmit a link level response frame. + */ + +static inline void gsm_response(struct gsm_mux *gsm, int addr, int control) +{ + gsm_send(gsm, addr, 0, control); +} + +/** + * gsm_command - send a control command + * @gsm: our GSM mux + * @addr: address for control frame + * @control: control byte including PF bit + * + * Format up and transmit a link level command frame. + */ + +static inline void gsm_command(struct gsm_mux *gsm, int addr, int control) +{ + gsm_send(gsm, addr, 1, control); +} + +/* Data transmission */ + +#define HDR_LEN 6 /* ADDR CTRL [LEN.2] DATA FCS */ + +/** + * gsm_data_alloc - allocate data frame + * @gsm: GSM mux + * @addr: DLCI address + * @len: length excluding header and FCS + * @ctrl: control byte + * + * Allocate a new data buffer for sending frames with data. Space is left + * at the front for header bytes but that is treated as an implementation + * detail and not for the high level code to use + */ + +static struct gsm_msg *gsm_data_alloc(struct gsm_mux *gsm, u8 addr, int len, + u8 ctrl) +{ + struct gsm_msg *m = kmalloc(sizeof(struct gsm_msg) + len + HDR_LEN, + GFP_ATOMIC); + if (m == NULL) + return NULL; + m->data = m->buffer + HDR_LEN - 1; /* Allow for FCS */ + m->len = len; + m->addr = addr; + m->ctrl = ctrl; + INIT_LIST_HEAD(&m->list); + return m; +} + +/** + * gsm_is_flow_ctrl_msg - checks if flow control message + * @msg: message to check + * + * Returns true if the given message is a flow control command of the + * control channel. False is returned in any other case. + */ +static bool gsm_is_flow_ctrl_msg(struct gsm_msg *msg) +{ + unsigned int cmd; + + if (msg->addr > 0) + return false; + + switch (msg->ctrl & ~PF) { + case UI: + case UIH: + cmd = 0; + if (gsm_read_ea_val(&cmd, msg->data + 2, msg->len - 2) < 1) + break; + switch (cmd & ~PF) { + case CMD_FCOFF: + case CMD_FCON: + return true; + } + break; + } + + return false; +} + +/** + * gsm_data_kick - poke the queue + * @gsm: GSM Mux + * + * The tty device has called us to indicate that room has appeared in + * the transmit queue. Ram more data into the pipe if we have any + * If we have been flow-stopped by a CMD_FCOFF, then we can only + * send messages on DLCI0 until CMD_FCON + * + * FIXME: lock against link layer control transmissions + */ + +static void gsm_data_kick(struct gsm_mux *gsm, struct gsm_dlci *dlci) +{ + struct gsm_msg *msg, *nmsg; + int len; + + list_for_each_entry_safe(msg, nmsg, &gsm->tx_list, list) { + if (gsm->constipated && !gsm_is_flow_ctrl_msg(msg)) + continue; + if (gsm->encoding != 0) { + gsm->txframe[0] = GSM1_SOF; + len = gsm_stuff_frame(msg->data, + gsm->txframe + 1, msg->len); + gsm->txframe[len + 1] = GSM1_SOF; + len += 2; + } else { + gsm->txframe[0] = GSM0_SOF; + memcpy(gsm->txframe + 1 , msg->data, msg->len); + gsm->txframe[msg->len + 1] = GSM0_SOF; + len = msg->len + 2; + } + + if (debug & 4) + print_hex_dump_bytes("gsm_data_kick: ", + DUMP_PREFIX_OFFSET, + gsm->txframe, len); + if (gsmld_output(gsm, gsm->txframe, len) < 0) + break; + /* FIXME: Can eliminate one SOF in many more cases */ + gsm->tx_bytes -= msg->len; + + list_del(&msg->list); + kfree(msg); + + if (dlci) { + tty_port_tty_wakeup(&dlci->port); + } else { + int i = 0; + + for (i = 0; i < NUM_DLCI; i++) + if (gsm->dlci[i]) + tty_port_tty_wakeup(&gsm->dlci[i]->port); + } + } +} + +/** + * __gsm_data_queue - queue a UI or UIH frame + * @dlci: DLCI sending the data + * @msg: message queued + * + * Add data to the transmit queue and try and get stuff moving + * out of the mux tty if not already doing so. The Caller must hold + * the gsm tx lock. + */ + +static void __gsm_data_queue(struct gsm_dlci *dlci, struct gsm_msg *msg) +{ + struct gsm_mux *gsm = dlci->gsm; + u8 *dp = msg->data; + u8 *fcs = dp + msg->len; + + /* Fill in the header */ + if (gsm->encoding == 0) { + if (msg->len < 128) + *--dp = (msg->len << 1) | EA; + else { + *--dp = (msg->len >> 7); /* bits 7 - 15 */ + *--dp = (msg->len & 127) << 1; /* bits 0 - 6 */ + } + } + + *--dp = msg->ctrl; + if (gsm->initiator) + *--dp = (msg->addr << 2) | 2 | EA; + else + *--dp = (msg->addr << 2) | EA; + *fcs = gsm_fcs_add_block(INIT_FCS, dp , msg->data - dp); + /* Ugly protocol layering violation */ + if (msg->ctrl == UI || msg->ctrl == (UI|PF)) + *fcs = gsm_fcs_add_block(*fcs, msg->data, msg->len); + *fcs = 0xFF - *fcs; + + gsm_print_packet("Q> ", msg->addr, gsm->initiator, msg->ctrl, + msg->data, msg->len); + + /* Move the header back and adjust the length, also allow for the FCS + now tacked on the end */ + msg->len += (msg->data - dp) + 1; + msg->data = dp; + + /* Add to the actual output queue */ + list_add_tail(&msg->list, &gsm->tx_list); + gsm->tx_bytes += msg->len; + gsm_data_kick(gsm, dlci); +} + +/** + * gsm_data_queue - queue a UI or UIH frame + * @dlci: DLCI sending the data + * @msg: message queued + * + * Add data to the transmit queue and try and get stuff moving + * out of the mux tty if not already doing so. Take the + * the gsm tx lock and dlci lock. + */ + +static void gsm_data_queue(struct gsm_dlci *dlci, struct gsm_msg *msg) +{ + unsigned long flags; + spin_lock_irqsave(&dlci->gsm->tx_lock, flags); + __gsm_data_queue(dlci, msg); + spin_unlock_irqrestore(&dlci->gsm->tx_lock, flags); +} + +/** + * gsm_dlci_data_output - try and push data out of a DLCI + * @gsm: mux + * @dlci: the DLCI to pull data from + * + * Pull data from a DLCI and send it into the transmit queue if there + * is data. Keep to the MRU of the mux. This path handles the usual tty + * interface which is a byte stream with optional modem data. + * + * Caller must hold the tx_lock of the mux. + */ + +static int gsm_dlci_data_output(struct gsm_mux *gsm, struct gsm_dlci *dlci) +{ + struct gsm_msg *msg; + u8 *dp; + int h, len, size; + + /* for modem bits without break data */ + h = ((dlci->adaption == 1) ? 0 : 1); + + len = kfifo_len(&dlci->fifo); + if (len == 0) + return 0; + + /* MTU/MRU count only the data bits but watch adaption mode */ + if ((len + h) > gsm->mtu) + len = gsm->mtu - h; + + size = len + h; + + msg = gsm_data_alloc(gsm, dlci->addr, size, gsm->ftype); + /* FIXME: need a timer or something to kick this so it can't + * get stuck with no work outstanding and no buffer free + */ + if (!msg) + return -ENOMEM; + dp = msg->data; + switch (dlci->adaption) { + case 1: /* Unstructured */ + break; + case 2: /* Unstructured with modem bits. + * Always one byte as we never send inline break data + */ + *dp++ = (gsm_encode_modem(dlci) << 1) | EA; + break; + default: + pr_err("%s: unsupported adaption %d\n", __func__, + dlci->adaption); + break; + } + + WARN_ON(len != kfifo_out_locked(&dlci->fifo, dp, len, + &dlci->lock)); + + /* Notify upper layer about available send space. */ + tty_port_tty_wakeup(&dlci->port); + + __gsm_data_queue(dlci, msg); + /* Bytes of data we used up */ + return size; +} + +/** + * gsm_dlci_data_output_framed - try and push data out of a DLCI + * @gsm: mux + * @dlci: the DLCI to pull data from + * + * Pull data from a DLCI and send it into the transmit queue if there + * is data. Keep to the MRU of the mux. This path handles framed data + * queued as skbuffs to the DLCI. + * + * Caller must hold the tx_lock of the mux. + */ + +static int gsm_dlci_data_output_framed(struct gsm_mux *gsm, + struct gsm_dlci *dlci) +{ + struct gsm_msg *msg; + u8 *dp; + int len, size; + int last = 0, first = 0; + int overhead = 0; + + /* One byte per frame is used for B/F flags */ + if (dlci->adaption == 4) + overhead = 1; + + /* dlci->skb is locked by tx_lock */ + if (dlci->skb == NULL) { + dlci->skb = skb_dequeue_tail(&dlci->skb_list); + if (dlci->skb == NULL) + return 0; + first = 1; + } + len = dlci->skb->len + overhead; + + /* MTU/MRU count only the data bits */ + if (len > gsm->mtu) { + if (dlci->adaption == 3) { + /* Over long frame, bin it */ + dev_kfree_skb_any(dlci->skb); + dlci->skb = NULL; + return 0; + } + len = gsm->mtu; + } else + last = 1; + + size = len + overhead; + msg = gsm_data_alloc(gsm, dlci->addr, size, gsm->ftype); + + /* FIXME: need a timer or something to kick this so it can't + get stuck with no work outstanding and no buffer free */ + if (msg == NULL) { + skb_queue_tail(&dlci->skb_list, dlci->skb); + dlci->skb = NULL; + return -ENOMEM; + } + dp = msg->data; + + if (dlci->adaption == 4) { /* Interruptible framed (Packetised Data) */ + /* Flag byte to carry the start/end info */ + *dp++ = last << 7 | first << 6 | 1; /* EA */ + len--; + } + memcpy(dp, dlci->skb->data, len); + skb_pull(dlci->skb, len); + __gsm_data_queue(dlci, msg); + if (last) { + dev_kfree_skb_any(dlci->skb); + dlci->skb = NULL; + } + return size; +} + +/** + * gsm_dlci_data_sweep - look for data to send + * @gsm: the GSM mux + * + * Sweep the GSM mux channels in priority order looking for ones with + * data to send. We could do with optimising this scan a bit. We aim + * to fill the queue totally or up to TX_THRESH_HI bytes. Once we hit + * TX_THRESH_LO we get called again + * + * FIXME: We should round robin between groups and in theory you can + * renegotiate DLCI priorities with optional stuff. Needs optimising. + */ + +static void gsm_dlci_data_sweep(struct gsm_mux *gsm) +{ + int len; + /* Priority ordering: We should do priority with RR of the groups */ + int i = 1; + + while (i < NUM_DLCI) { + struct gsm_dlci *dlci; + + if (gsm->tx_bytes > TX_THRESH_HI) + break; + dlci = gsm->dlci[i]; + if (dlci == NULL || dlci->constipated) { + i++; + continue; + } + if (dlci->adaption < 3 && !dlci->net) + len = gsm_dlci_data_output(gsm, dlci); + else + len = gsm_dlci_data_output_framed(gsm, dlci); + if (len < 0) + break; + /* DLCI empty - try the next */ + if (len == 0) + i++; + } +} + +/** + * gsm_dlci_data_kick - transmit if possible + * @dlci: DLCI to kick + * + * Transmit data from this DLCI if the queue is empty. We can't rely on + * a tty wakeup except when we filled the pipe so we need to fire off + * new data ourselves in other cases. + */ + +static void gsm_dlci_data_kick(struct gsm_dlci *dlci) +{ + unsigned long flags; + int sweep; + + if (dlci->constipated) + return; + + spin_lock_irqsave(&dlci->gsm->tx_lock, flags); + /* If we have nothing running then we need to fire up */ + sweep = (dlci->gsm->tx_bytes < TX_THRESH_LO); + if (dlci->gsm->tx_bytes == 0) { + if (dlci->net) + gsm_dlci_data_output_framed(dlci->gsm, dlci); + else + gsm_dlci_data_output(dlci->gsm, dlci); + } + if (sweep) + gsm_dlci_data_sweep(dlci->gsm); + spin_unlock_irqrestore(&dlci->gsm->tx_lock, flags); +} + +/* + * Control message processing + */ + + +/** + * gsm_control_reply - send a response frame to a control + * @gsm: gsm channel + * @cmd: the command to use + * @data: data to follow encoded info + * @dlen: length of data + * + * Encode up and queue a UI/UIH frame containing our response. + */ + +static void gsm_control_reply(struct gsm_mux *gsm, int cmd, const u8 *data, + int dlen) +{ + struct gsm_msg *msg; + msg = gsm_data_alloc(gsm, 0, dlen + 2, gsm->ftype); + if (msg == NULL) + return; + msg->data[0] = (cmd & 0xFE) << 1 | EA; /* Clear C/R */ + msg->data[1] = (dlen << 1) | EA; + memcpy(msg->data + 2, data, dlen); + gsm_data_queue(gsm->dlci[0], msg); +} + +/** + * gsm_process_modem - process received modem status + * @tty: virtual tty bound to the DLCI + * @dlci: DLCI to affect + * @modem: modem bits (full EA) + * + * Used when a modem control message or line state inline in adaption + * layer 2 is processed. Sort out the local modem state and throttles + */ + +static void gsm_process_modem(struct tty_struct *tty, struct gsm_dlci *dlci, + u32 modem, int clen) +{ + int mlines = 0; + u8 brk = 0; + int fc; + + /* The modem status command can either contain one octet (v.24 signals) + or two octets (v.24 signals + break signals). The length field will + either be 2 or 3 respectively. This is specified in section + 5.4.6.3.7 of the 27.010 mux spec. */ + + if (clen == 2) + modem = modem & 0x7f; + else { + brk = modem & 0x7f; + modem = (modem >> 7) & 0x7f; + } + + /* Flow control/ready to communicate */ + fc = (modem & MDM_FC) || !(modem & MDM_RTR); + if (fc && !dlci->constipated) { + /* Need to throttle our output on this device */ + dlci->constipated = true; + } else if (!fc && dlci->constipated) { + dlci->constipated = false; + gsm_dlci_data_kick(dlci); + } + + /* Map modem bits */ + if (modem & MDM_RTC) + mlines |= TIOCM_DSR | TIOCM_DTR; + if (modem & MDM_RTR) + mlines |= TIOCM_RTS | TIOCM_CTS; + if (modem & MDM_IC) + mlines |= TIOCM_RI; + if (modem & MDM_DV) + mlines |= TIOCM_CD; + + /* Carrier drop -> hangup */ + if (tty) { + if ((mlines & TIOCM_CD) == 0 && (dlci->modem_rx & TIOCM_CD)) + if (!C_CLOCAL(tty)) + tty_hangup(tty); + } + if (brk & 0x01) + tty_insert_flip_char(&dlci->port, 0, TTY_BREAK); + dlci->modem_rx = mlines; +} + +/** + * gsm_control_modem - modem status received + * @gsm: GSM channel + * @data: data following command + * @clen: command length + * + * We have received a modem status control message. This is used by + * the GSM mux protocol to pass virtual modem line status and optionally + * to indicate break signals. Unpack it, convert to Linux representation + * and if need be stuff a break message down the tty. + */ + +static void gsm_control_modem(struct gsm_mux *gsm, const u8 *data, int clen) +{ + unsigned int addr = 0; + unsigned int modem = 0; + unsigned int brk = 0; + struct gsm_dlci *dlci; + int len = clen; + const u8 *dp = data; + struct tty_struct *tty; + + while (gsm_read_ea(&addr, *dp++) == 0) { + len--; + if (len == 0) + return; + } + /* Must be at least one byte following the EA */ + len--; + if (len <= 0) + return; + + addr >>= 1; + /* Closed port, or invalid ? */ + if (addr == 0 || addr >= NUM_DLCI || gsm->dlci[addr] == NULL) + return; + dlci = gsm->dlci[addr]; + + while (gsm_read_ea(&modem, *dp++) == 0) { + len--; + if (len == 0) + return; + } + len--; + if (len > 0) { + while (gsm_read_ea(&brk, *dp++) == 0) { + len--; + if (len == 0) + return; + } + modem <<= 7; + modem |= (brk & 0x7f); + } + tty = tty_port_tty_get(&dlci->port); + gsm_process_modem(tty, dlci, modem, clen); + if (tty) { + tty_wakeup(tty); + tty_kref_put(tty); + } + gsm_control_reply(gsm, CMD_MSC, data, clen); +} + +/** + * gsm_control_rls - remote line status + * @gsm: GSM channel + * @data: data bytes + * @clen: data length + * + * The modem sends us a two byte message on the control channel whenever + * it wishes to send us an error state from the virtual link. Stuff + * this into the uplink tty if present + */ + +static void gsm_control_rls(struct gsm_mux *gsm, const u8 *data, int clen) +{ + struct tty_port *port; + unsigned int addr = 0; + u8 bits; + int len = clen; + const u8 *dp = data; + + while (gsm_read_ea(&addr, *dp++) == 0) { + len--; + if (len == 0) + return; + } + /* Must be at least one byte following ea */ + len--; + if (len <= 0) + return; + addr >>= 1; + /* Closed port, or invalid ? */ + if (addr == 0 || addr >= NUM_DLCI || gsm->dlci[addr] == NULL) + return; + /* No error ? */ + bits = *dp; + if ((bits & 1) == 0) + return; + + port = &gsm->dlci[addr]->port; + + if (bits & 2) + tty_insert_flip_char(port, 0, TTY_OVERRUN); + if (bits & 4) + tty_insert_flip_char(port, 0, TTY_PARITY); + if (bits & 8) + tty_insert_flip_char(port, 0, TTY_FRAME); + + tty_flip_buffer_push(port); + + gsm_control_reply(gsm, CMD_RLS, data, clen); +} + +static void gsm_dlci_begin_close(struct gsm_dlci *dlci); + +/** + * gsm_control_message - DLCI 0 control processing + * @gsm: our GSM mux + * @command: the command EA + * @data: data beyond the command/length EAs + * @clen: length + * + * Input processor for control messages from the other end of the link. + * Processes the incoming request and queues a response frame or an + * NSC response if not supported + */ + +static void gsm_control_message(struct gsm_mux *gsm, unsigned int command, + const u8 *data, int clen) +{ + u8 buf[1]; + unsigned long flags; + + switch (command) { + case CMD_CLD: { + struct gsm_dlci *dlci = gsm->dlci[0]; + /* Modem wishes to close down */ + if (dlci) { + dlci->dead = true; + gsm->dead = true; + gsm_dlci_begin_close(dlci); + } + } + break; + case CMD_TEST: + /* Modem wishes to test, reply with the data */ + gsm_control_reply(gsm, CMD_TEST, data, clen); + break; + case CMD_FCON: + /* Modem can accept data again */ + gsm->constipated = false; + gsm_control_reply(gsm, CMD_FCON, NULL, 0); + /* Kick the link in case it is idling */ + spin_lock_irqsave(&gsm->tx_lock, flags); + gsm_data_kick(gsm, NULL); + spin_unlock_irqrestore(&gsm->tx_lock, flags); + break; + case CMD_FCOFF: + /* Modem wants us to STFU */ + gsm->constipated = true; + gsm_control_reply(gsm, CMD_FCOFF, NULL, 0); + break; + case CMD_MSC: + /* Out of band modem line change indicator for a DLCI */ + gsm_control_modem(gsm, data, clen); + break; + case CMD_RLS: + /* Out of band error reception for a DLCI */ + gsm_control_rls(gsm, data, clen); + break; + case CMD_PSC: + /* Modem wishes to enter power saving state */ + gsm_control_reply(gsm, CMD_PSC, NULL, 0); + break; + /* Optional unsupported commands */ + case CMD_PN: /* Parameter negotiation */ + case CMD_RPN: /* Remote port negotiation */ + case CMD_SNC: /* Service negotiation command */ + default: + /* Reply to bad commands with an NSC */ + buf[0] = command; + gsm_control_reply(gsm, CMD_NSC, buf, 1); + break; + } +} + +/** + * gsm_control_response - process a response to our control + * @gsm: our GSM mux + * @command: the command (response) EA + * @data: data beyond the command/length EA + * @clen: length + * + * Process a response to an outstanding command. We only allow a single + * control message in flight so this is fairly easy. All the clean up + * is done by the caller, we just update the fields, flag it as done + * and return + */ + +static void gsm_control_response(struct gsm_mux *gsm, unsigned int command, + const u8 *data, int clen) +{ + struct gsm_control *ctrl; + unsigned long flags; + + spin_lock_irqsave(&gsm->control_lock, flags); + + ctrl = gsm->pending_cmd; + /* Does the reply match our command */ + command |= 1; + if (ctrl != NULL && (command == ctrl->cmd || command == CMD_NSC)) { + /* Our command was replied to, kill the retry timer */ + del_timer(&gsm->t2_timer); + gsm->pending_cmd = NULL; + /* Rejected by the other end */ + if (command == CMD_NSC) + ctrl->error = -EOPNOTSUPP; + ctrl->done = 1; + wake_up(&gsm->event); + } + spin_unlock_irqrestore(&gsm->control_lock, flags); +} + +/** + * gsm_control_transmit - send control packet + * @gsm: gsm mux + * @ctrl: frame to send + * + * Send out a pending control command (called under control lock) + */ + +static void gsm_control_transmit(struct gsm_mux *gsm, struct gsm_control *ctrl) +{ + struct gsm_msg *msg = gsm_data_alloc(gsm, 0, ctrl->len + 2, gsm->ftype); + if (msg == NULL) + return; + msg->data[0] = (ctrl->cmd << 1) | CR | EA; /* command */ + msg->data[1] = (ctrl->len << 1) | EA; + memcpy(msg->data + 2, ctrl->data, ctrl->len); + gsm_data_queue(gsm->dlci[0], msg); +} + +/** + * gsm_control_retransmit - retransmit a control frame + * @t: timer contained in our gsm object + * + * Called off the T2 timer expiry in order to retransmit control frames + * that have been lost in the system somewhere. The control_lock protects + * us from colliding with another sender or a receive completion event. + * In that situation the timer may still occur in a small window but + * gsm->pending_cmd will be NULL and we just let the timer expire. + */ + +static void gsm_control_retransmit(struct timer_list *t) +{ + struct gsm_mux *gsm = from_timer(gsm, t, t2_timer); + struct gsm_control *ctrl; + unsigned long flags; + spin_lock_irqsave(&gsm->control_lock, flags); + ctrl = gsm->pending_cmd; + if (ctrl) { + if (gsm->cretries == 0 || !gsm->dlci[0] || gsm->dlci[0]->dead) { + gsm->pending_cmd = NULL; + ctrl->error = -ETIMEDOUT; + ctrl->done = 1; + spin_unlock_irqrestore(&gsm->control_lock, flags); + wake_up(&gsm->event); + return; + } + gsm->cretries--; + gsm_control_transmit(gsm, ctrl); + mod_timer(&gsm->t2_timer, jiffies + gsm->t2 * HZ / 100); + } + spin_unlock_irqrestore(&gsm->control_lock, flags); +} + +/** + * gsm_control_send - send a control frame on DLCI 0 + * @gsm: the GSM channel + * @command: command to send including CR bit + * @data: bytes of data (must be kmalloced) + * @clen: length of the block to send + * + * Queue and dispatch a control command. Only one command can be + * active at a time. In theory more can be outstanding but the matching + * gets really complicated so for now stick to one outstanding. + */ + +static struct gsm_control *gsm_control_send(struct gsm_mux *gsm, + unsigned int command, u8 *data, int clen) +{ + struct gsm_control *ctrl = kzalloc(sizeof(struct gsm_control), + GFP_ATOMIC); + unsigned long flags; + if (ctrl == NULL) + return NULL; +retry: + wait_event(gsm->event, gsm->pending_cmd == NULL); + spin_lock_irqsave(&gsm->control_lock, flags); + if (gsm->pending_cmd != NULL) { + spin_unlock_irqrestore(&gsm->control_lock, flags); + goto retry; + } + ctrl->cmd = command; + ctrl->data = data; + ctrl->len = clen; + gsm->pending_cmd = ctrl; + + /* If DLCI0 is in ADM mode skip retries, it won't respond */ + if (gsm->dlci[0]->mode == DLCI_MODE_ADM) + gsm->cretries = 0; + else + gsm->cretries = gsm->n2; + + mod_timer(&gsm->t2_timer, jiffies + gsm->t2 * HZ / 100); + gsm_control_transmit(gsm, ctrl); + spin_unlock_irqrestore(&gsm->control_lock, flags); + return ctrl; +} + +/** + * gsm_control_wait - wait for a control to finish + * @gsm: GSM mux + * @control: control we are waiting on + * + * Waits for the control to complete or time out. Frees any used + * resources and returns 0 for success, or an error if the remote + * rejected or ignored the request. + */ + +static int gsm_control_wait(struct gsm_mux *gsm, struct gsm_control *control) +{ + int err; + wait_event(gsm->event, control->done == 1); + err = control->error; + kfree(control); + return err; +} + + +/* + * DLCI level handling: Needs krefs + */ + +/* + * State transitions and timers + */ + +/** + * gsm_dlci_close - a DLCI has closed + * @dlci: DLCI that closed + * + * Perform processing when moving a DLCI into closed state. If there + * is an attached tty this is hung up + */ + +static void gsm_dlci_close(struct gsm_dlci *dlci) +{ + unsigned long flags; + + del_timer(&dlci->t1); + if (debug & 8) + pr_debug("DLCI %d goes closed.\n", dlci->addr); + dlci->state = DLCI_CLOSED; + /* Prevent us from sending data before the link is up again */ + dlci->constipated = true; + if (dlci->addr != 0) { + tty_port_tty_hangup(&dlci->port, false); + spin_lock_irqsave(&dlci->lock, flags); + kfifo_reset(&dlci->fifo); + spin_unlock_irqrestore(&dlci->lock, flags); + /* Ensure that gsmtty_open() can return. */ + tty_port_set_initialized(&dlci->port, 0); + wake_up_interruptible(&dlci->port.open_wait); + } else + dlci->gsm->dead = true; + wake_up(&dlci->gsm->event); + /* A DLCI 0 close is a MUX termination so we need to kick that + back to userspace somehow */ +} + +/** + * gsm_dlci_open - a DLCI has opened + * @dlci: DLCI that opened + * + * Perform processing when moving a DLCI into open state. + */ + +static void gsm_dlci_open(struct gsm_dlci *dlci) +{ + /* Note that SABM UA .. SABM UA first UA lost can mean that we go + open -> open */ + del_timer(&dlci->t1); + /* This will let a tty open continue */ + dlci->state = DLCI_OPEN; + dlci->constipated = false; + if (debug & 8) + pr_debug("DLCI %d goes open.\n", dlci->addr); + wake_up(&dlci->gsm->event); +} + +/** + * gsm_dlci_t1 - T1 timer expiry + * @t: timer contained in the DLCI that opened + * + * The T1 timer handles retransmits of control frames (essentially of + * SABM and DISC). We resend the command until the retry count runs out + * in which case an opening port goes back to closed and a closing port + * is simply put into closed state (any further frames from the other + * end will get a DM response) + * + * Some control dlci can stay in ADM mode with other dlci working just + * fine. In that case we can just keep the control dlci open after the + * DLCI_OPENING retries time out. + */ + +static void gsm_dlci_t1(struct timer_list *t) +{ + struct gsm_dlci *dlci = from_timer(dlci, t, t1); + struct gsm_mux *gsm = dlci->gsm; + + switch (dlci->state) { + case DLCI_OPENING: + if (dlci->retries) { + dlci->retries--; + gsm_command(dlci->gsm, dlci->addr, SABM|PF); + mod_timer(&dlci->t1, jiffies + gsm->t1 * HZ / 100); + } else if (!dlci->addr && gsm->control == (DM | PF)) { + if (debug & 8) + pr_info("DLCI %d opening in ADM mode.\n", + dlci->addr); + dlci->mode = DLCI_MODE_ADM; + gsm_dlci_open(dlci); + } else { + gsm_dlci_begin_close(dlci); /* prevent half open link */ + } + + break; + case DLCI_CLOSING: + if (dlci->retries) { + dlci->retries--; + gsm_command(dlci->gsm, dlci->addr, DISC|PF); + mod_timer(&dlci->t1, jiffies + gsm->t1 * HZ / 100); + } else + gsm_dlci_close(dlci); + break; + default: + pr_debug("%s: unhandled state: %d\n", __func__, dlci->state); + break; + } +} + +/** + * gsm_dlci_begin_open - start channel open procedure + * @dlci: DLCI to open + * + * Commence opening a DLCI from the Linux side. We issue SABM messages + * to the modem which should then reply with a UA or ADM, at which point + * we will move into open state. Opening is done asynchronously with retry + * running off timers and the responses. + */ + +static void gsm_dlci_begin_open(struct gsm_dlci *dlci) +{ + struct gsm_mux *gsm = dlci->gsm; + if (dlci->state == DLCI_OPEN || dlci->state == DLCI_OPENING) + return; + dlci->retries = gsm->n2; + dlci->state = DLCI_OPENING; + gsm_command(dlci->gsm, dlci->addr, SABM|PF); + mod_timer(&dlci->t1, jiffies + gsm->t1 * HZ / 100); +} + +/** + * gsm_dlci_set_opening - change state to opening + * @dlci: DLCI to open + * + * Change internal state to wait for DLCI open from initiator side. + * We set off timers and responses upon reception of an SABM. + */ +static void gsm_dlci_set_opening(struct gsm_dlci *dlci) +{ + switch (dlci->state) { + case DLCI_CLOSED: + case DLCI_CLOSING: + dlci->state = DLCI_OPENING; + break; + default: + break; + } +} + +/** + * gsm_dlci_begin_close - start channel open procedure + * @dlci: DLCI to open + * + * Commence closing a DLCI from the Linux side. We issue DISC messages + * to the modem which should then reply with a UA, at which point we + * will move into closed state. Closing is done asynchronously with retry + * off timers. We may also receive a DM reply from the other end which + * indicates the channel was already closed. + */ + +static void gsm_dlci_begin_close(struct gsm_dlci *dlci) +{ + struct gsm_mux *gsm = dlci->gsm; + if (dlci->state == DLCI_CLOSED || dlci->state == DLCI_CLOSING) + return; + dlci->retries = gsm->n2; + dlci->state = DLCI_CLOSING; + gsm_command(dlci->gsm, dlci->addr, DISC|PF); + mod_timer(&dlci->t1, jiffies + gsm->t1 * HZ / 100); +} + +/** + * gsm_dlci_data - data arrived + * @dlci: channel + * @data: block of bytes received + * @clen: length of received block + * + * A UI or UIH frame has arrived which contains data for a channel + * other than the control channel. If the relevant virtual tty is + * open we shovel the bits down it, if not we drop them. + */ + +static void gsm_dlci_data(struct gsm_dlci *dlci, const u8 *data, int clen) +{ + /* krefs .. */ + struct tty_port *port = &dlci->port; + struct tty_struct *tty; + unsigned int modem = 0; + int len = clen; + + if (debug & 16) + pr_debug("%d bytes for tty\n", len); + switch (dlci->adaption) { + /* Unsupported types */ + case 4: /* Packetised interruptible data */ + break; + case 3: /* Packetised uininterruptible voice/data */ + break; + case 2: /* Asynchronous serial with line state in each frame */ + while (gsm_read_ea(&modem, *data++) == 0) { + len--; + if (len == 0) + return; + } + tty = tty_port_tty_get(port); + if (tty) { + gsm_process_modem(tty, dlci, modem, clen); + tty_kref_put(tty); + } + fallthrough; + case 1: /* Line state will go via DLCI 0 controls only */ + default: + tty_insert_flip_string(port, data, len); + tty_flip_buffer_push(port); + } +} + +/** + * gsm_dlci_control - data arrived on control channel + * @dlci: channel + * @data: block of bytes received + * @len: length of received block + * + * A UI or UIH frame has arrived which contains data for DLCI 0 the + * control channel. This should contain a command EA followed by + * control data bytes. The command EA contains a command/response bit + * and we divide up the work accordingly. + */ + +static void gsm_dlci_command(struct gsm_dlci *dlci, const u8 *data, int len) +{ + /* See what command is involved */ + unsigned int command = 0; + while (len-- > 0) { + if (gsm_read_ea(&command, *data++) == 1) { + int clen = *data++; + len--; + /* FIXME: this is properly an EA */ + clen >>= 1; + /* Malformed command ? */ + if (clen > len) + return; + if (command & 1) + gsm_control_message(dlci->gsm, command, + data, clen); + else + gsm_control_response(dlci->gsm, command, + data, clen); + return; + } + } +} + +/* + * Allocate/Free DLCI channels + */ + +/** + * gsm_dlci_alloc - allocate a DLCI + * @gsm: GSM mux + * @addr: address of the DLCI + * + * Allocate and install a new DLCI object into the GSM mux. + * + * FIXME: review locking races + */ + +static struct gsm_dlci *gsm_dlci_alloc(struct gsm_mux *gsm, int addr) +{ + struct gsm_dlci *dlci = kzalloc(sizeof(struct gsm_dlci), GFP_ATOMIC); + if (dlci == NULL) + return NULL; + spin_lock_init(&dlci->lock); + mutex_init(&dlci->mutex); + if (kfifo_alloc(&dlci->fifo, 4096, GFP_KERNEL) < 0) { + kfree(dlci); + return NULL; + } + + skb_queue_head_init(&dlci->skb_list); + timer_setup(&dlci->t1, gsm_dlci_t1, 0); + tty_port_init(&dlci->port); + dlci->port.ops = &gsm_port_ops; + dlci->gsm = gsm; + dlci->addr = addr; + dlci->adaption = gsm->adaption; + dlci->state = DLCI_CLOSED; + if (addr) { + dlci->data = gsm_dlci_data; + /* Prevent us from sending data before the link is up */ + dlci->constipated = true; + } else { + dlci->data = gsm_dlci_command; + } + gsm->dlci[addr] = dlci; + return dlci; +} + +/** + * gsm_dlci_free - free DLCI + * @port: tty port for DLCI to free + * + * Free up a DLCI. + * + * Can sleep. + */ +static void gsm_dlci_free(struct tty_port *port) +{ + struct gsm_dlci *dlci = container_of(port, struct gsm_dlci, port); + + del_timer_sync(&dlci->t1); + dlci->gsm->dlci[dlci->addr] = NULL; + kfifo_free(&dlci->fifo); + while ((dlci->skb = skb_dequeue(&dlci->skb_list))) + dev_kfree_skb(dlci->skb); + kfree(dlci); +} + +static inline void dlci_get(struct gsm_dlci *dlci) +{ + tty_port_get(&dlci->port); +} + +static inline void dlci_put(struct gsm_dlci *dlci) +{ + tty_port_put(&dlci->port); +} + +static void gsm_destroy_network(struct gsm_dlci *dlci); + +/** + * gsm_dlci_release - release DLCI + * @dlci: DLCI to destroy + * + * Release a DLCI. Actual free is deferred until either + * mux is closed or tty is closed - whichever is last. + * + * Can sleep. + */ +static void gsm_dlci_release(struct gsm_dlci *dlci) +{ + struct tty_struct *tty = tty_port_tty_get(&dlci->port); + if (tty) { + mutex_lock(&dlci->mutex); + gsm_destroy_network(dlci); + mutex_unlock(&dlci->mutex); + + /* We cannot use tty_hangup() because in tty_kref_put() the tty + * driver assumes that the hangup queue is free and reuses it to + * queue release_one_tty() -> NULL pointer panic in + * process_one_work(). + */ + tty_vhangup(tty); + + tty_port_tty_set(&dlci->port, NULL); + tty_kref_put(tty); + } + dlci->state = DLCI_CLOSED; + dlci_put(dlci); +} + +/* + * LAPBish link layer logic + */ + +/** + * gsm_queue - a GSM frame is ready to process + * @gsm: pointer to our gsm mux + * + * At this point in time a frame has arrived and been demangled from + * the line encoding. All the differences between the encodings have + * been handled below us and the frame is unpacked into the structures. + * The fcs holds the header FCS but any data FCS must be added here. + */ + +static void gsm_queue(struct gsm_mux *gsm) +{ + struct gsm_dlci *dlci; + u8 cr; + int address; + /* We have to sneak a look at the packet body to do the FCS. + A somewhat layering violation in the spec */ + + if ((gsm->control & ~PF) == UI) + gsm->fcs = gsm_fcs_add_block(gsm->fcs, gsm->buf, gsm->len); + if (gsm->encoding == 0) { + /* WARNING: gsm->received_fcs is used for + gsm->encoding = 0 only. + In this case it contain the last piece of data + required to generate final CRC */ + gsm->fcs = gsm_fcs_add(gsm->fcs, gsm->received_fcs); + } + if (gsm->fcs != GOOD_FCS) { + gsm->bad_fcs++; + if (debug & 4) + pr_debug("BAD FCS %02x\n", gsm->fcs); + return; + } + address = gsm->address >> 1; + if (address >= NUM_DLCI) + goto invalid; + + cr = gsm->address & 1; /* C/R bit */ + + gsm_print_packet("<--", address, cr, gsm->control, gsm->buf, gsm->len); + + cr ^= 1 - gsm->initiator; /* Flip so 1 always means command */ + dlci = gsm->dlci[address]; + + switch (gsm->control) { + case SABM|PF: + if (cr == 0) + goto invalid; + if (dlci == NULL) + dlci = gsm_dlci_alloc(gsm, address); + if (dlci == NULL) + return; + if (dlci->dead) + gsm_response(gsm, address, DM); + else { + gsm_response(gsm, address, UA); + gsm_dlci_open(dlci); + } + break; + case DISC|PF: + if (cr == 0) + goto invalid; + if (dlci == NULL || dlci->state == DLCI_CLOSED) { + gsm_response(gsm, address, DM); + return; + } + /* Real close complete */ + gsm_response(gsm, address, UA); + gsm_dlci_close(dlci); + break; + case UA|PF: + if (cr == 0 || dlci == NULL) + break; + switch (dlci->state) { + case DLCI_CLOSING: + gsm_dlci_close(dlci); + break; + case DLCI_OPENING: + gsm_dlci_open(dlci); + break; + default: + pr_debug("%s: unhandled state: %d\n", __func__, + dlci->state); + break; + } + break; + case DM: /* DM can be valid unsolicited */ + case DM|PF: + if (cr) + goto invalid; + if (dlci == NULL) + return; + gsm_dlci_close(dlci); + break; + case UI: + case UI|PF: + case UIH: + case UIH|PF: +#if 0 + if (cr) + goto invalid; +#endif + if (dlci == NULL || dlci->state != DLCI_OPEN) { + gsm_response(gsm, address, DM|PF); + return; + } + dlci->data(dlci, gsm->buf, gsm->len); + break; + default: + goto invalid; + } + return; +invalid: + gsm->malformed++; + return; +} + + +/** + * gsm0_receive - perform processing for non-transparency + * @gsm: gsm data for this ldisc instance + * @c: character + * + * Receive bytes in gsm mode 0 + */ + +static void gsm0_receive(struct gsm_mux *gsm, unsigned char c) +{ + unsigned int len; + + switch (gsm->state) { + case GSM_SEARCH: /* SOF marker */ + if (c == GSM0_SOF) { + gsm->state = GSM_ADDRESS; + gsm->address = 0; + gsm->len = 0; + gsm->fcs = INIT_FCS; + } + break; + case GSM_ADDRESS: /* Address EA */ + gsm->fcs = gsm_fcs_add(gsm->fcs, c); + if (gsm_read_ea(&gsm->address, c)) + gsm->state = GSM_CONTROL; + break; + case GSM_CONTROL: /* Control Byte */ + gsm->fcs = gsm_fcs_add(gsm->fcs, c); + gsm->control = c; + gsm->state = GSM_LEN0; + break; + case GSM_LEN0: /* Length EA */ + gsm->fcs = gsm_fcs_add(gsm->fcs, c); + if (gsm_read_ea(&gsm->len, c)) { + if (gsm->len > gsm->mru) { + gsm->bad_size++; + gsm->state = GSM_SEARCH; + break; + } + gsm->count = 0; + if (!gsm->len) + gsm->state = GSM_FCS; + else + gsm->state = GSM_DATA; + break; + } + gsm->state = GSM_LEN1; + break; + case GSM_LEN1: + gsm->fcs = gsm_fcs_add(gsm->fcs, c); + len = c; + gsm->len |= len << 7; + if (gsm->len > gsm->mru) { + gsm->bad_size++; + gsm->state = GSM_SEARCH; + break; + } + gsm->count = 0; + if (!gsm->len) + gsm->state = GSM_FCS; + else + gsm->state = GSM_DATA; + break; + case GSM_DATA: /* Data */ + gsm->buf[gsm->count++] = c; + if (gsm->count == gsm->len) + gsm->state = GSM_FCS; + break; + case GSM_FCS: /* FCS follows the packet */ + gsm->received_fcs = c; + gsm_queue(gsm); + gsm->state = GSM_SSOF; + break; + case GSM_SSOF: + if (c == GSM0_SOF) { + gsm->state = GSM_SEARCH; + break; + } + break; + default: + pr_debug("%s: unhandled state: %d\n", __func__, gsm->state); + break; + } +} + +/** + * gsm1_receive - perform processing for non-transparency + * @gsm: gsm data for this ldisc instance + * @c: character + * + * Receive bytes in mode 1 (Advanced option) + */ + +static void gsm1_receive(struct gsm_mux *gsm, unsigned char c) +{ + /* handle XON/XOFF */ + if ((c & ISO_IEC_646_MASK) == XON) { + gsm->constipated = true; + return; + } else if ((c & ISO_IEC_646_MASK) == XOFF) { + gsm->constipated = false; + /* Kick the link in case it is idling */ + gsm_data_kick(gsm, NULL); + return; + } + if (c == GSM1_SOF) { + /* EOF is only valid in frame if we have got to the data state + and received at least one byte (the FCS) */ + if (gsm->state == GSM_DATA && gsm->count) { + /* Extract the FCS */ + gsm->count--; + gsm->fcs = gsm_fcs_add(gsm->fcs, gsm->buf[gsm->count]); + gsm->len = gsm->count; + gsm_queue(gsm); + gsm->state = GSM_START; + return; + } + /* Any partial frame was a runt so go back to start */ + if (gsm->state != GSM_START) { + if (gsm->state != GSM_SEARCH) + gsm->malformed++; + gsm->state = GSM_START; + } + /* A SOF in GSM_START means we are still reading idling or + framing bytes */ + return; + } + + if (c == GSM1_ESCAPE) { + gsm->escape = true; + return; + } + + /* Only an unescaped SOF gets us out of GSM search */ + if (gsm->state == GSM_SEARCH) + return; + + if (gsm->escape) { + c ^= GSM1_ESCAPE_BITS; + gsm->escape = false; + } + switch (gsm->state) { + case GSM_START: /* First byte after SOF */ + gsm->address = 0; + gsm->state = GSM_ADDRESS; + gsm->fcs = INIT_FCS; + fallthrough; + case GSM_ADDRESS: /* Address continuation */ + gsm->fcs = gsm_fcs_add(gsm->fcs, c); + if (gsm_read_ea(&gsm->address, c)) + gsm->state = GSM_CONTROL; + break; + case GSM_CONTROL: /* Control Byte */ + gsm->fcs = gsm_fcs_add(gsm->fcs, c); + gsm->control = c; + gsm->count = 0; + gsm->state = GSM_DATA; + break; + case GSM_DATA: /* Data */ + if (gsm->count > gsm->mru) { /* Allow one for the FCS */ + gsm->state = GSM_OVERRUN; + gsm->bad_size++; + } else + gsm->buf[gsm->count++] = c; + break; + case GSM_OVERRUN: /* Over-long - eg a dropped SOF */ + break; + default: + pr_debug("%s: unhandled state: %d\n", __func__, gsm->state); + break; + } +} + +/** + * gsm_error - handle tty error + * @gsm: ldisc data + * @data: byte received (may be invalid) + * @flag: error received + * + * Handle an error in the receipt of data for a frame. Currently we just + * go back to hunting for a SOF. + * + * FIXME: better diagnostics ? + */ + +static void gsm_error(struct gsm_mux *gsm, + unsigned char data, unsigned char flag) +{ + gsm->state = GSM_SEARCH; + gsm->io_error++; +} + +/** + * gsm_cleanup_mux - generic GSM protocol cleanup + * @gsm: our mux + * @disc: disconnect link? + * + * Clean up the bits of the mux which are the same for all framing + * protocols. Remove the mux from the mux table, stop all the timers + * and then shut down each device hanging up the channels as we go. + */ + +static void gsm_cleanup_mux(struct gsm_mux *gsm, bool disc) +{ + int i; + struct gsm_dlci *dlci; + struct gsm_msg *txq, *ntxq; + + gsm->dead = true; + mutex_lock(&gsm->mutex); + + dlci = gsm->dlci[0]; + if (dlci) { + if (disc && dlci->state != DLCI_CLOSED) { + gsm_dlci_begin_close(dlci); + wait_event(gsm->event, dlci->state == DLCI_CLOSED); + } + dlci->dead = true; + } + + /* Finish outstanding timers, making sure they are done */ + del_timer_sync(&gsm->t2_timer); + + /* Free up any link layer users and finally the control channel */ + if (gsm->has_devices) { + gsm_unregister_devices(gsm_tty_driver, gsm->num); + gsm->has_devices = false; + } + for (i = NUM_DLCI - 1; i >= 0; i--) + if (gsm->dlci[i]) + gsm_dlci_release(gsm->dlci[i]); + mutex_unlock(&gsm->mutex); + /* Now wipe the queues */ + tty_ldisc_flush(gsm->tty); + list_for_each_entry_safe(txq, ntxq, &gsm->tx_list, list) + kfree(txq); + INIT_LIST_HEAD(&gsm->tx_list); +} + +/** + * gsm_activate_mux - generic GSM setup + * @gsm: our mux + * + * Set up the bits of the mux which are the same for all framing + * protocols. Add the mux to the mux table so it can be opened and + * finally kick off connecting to DLCI 0 on the modem. + */ + +static int gsm_activate_mux(struct gsm_mux *gsm) +{ + struct gsm_dlci *dlci; + int ret; + + if (gsm->encoding == 0) + gsm->receive = gsm0_receive; + else + gsm->receive = gsm1_receive; + + ret = gsm_register_devices(gsm_tty_driver, gsm->num); + if (ret) + return ret; + + dlci = gsm_dlci_alloc(gsm, 0); + if (dlci == NULL) + return -ENOMEM; + gsm->has_devices = true; + gsm->dead = false; /* Tty opens are now permissible */ + return 0; +} + +/** + * gsm_free_mux - free up a mux + * @gsm: mux to free + * + * Dispose of allocated resources for a dead mux + */ +static void gsm_free_mux(struct gsm_mux *gsm) +{ + int i; + + for (i = 0; i < MAX_MUX; i++) { + if (gsm == gsm_mux[i]) { + gsm_mux[i] = NULL; + break; + } + } + mutex_destroy(&gsm->mutex); + kfree(gsm->txframe); + kfree(gsm->buf); + kfree(gsm); +} + +/** + * gsm_free_muxr - free up a mux + * @ref: kreference to the mux to free + * + * Dispose of allocated resources for a dead mux + */ +static void gsm_free_muxr(struct kref *ref) +{ + struct gsm_mux *gsm = container_of(ref, struct gsm_mux, ref); + gsm_free_mux(gsm); +} + +static inline void mux_get(struct gsm_mux *gsm) +{ + unsigned long flags; + + spin_lock_irqsave(&gsm_mux_lock, flags); + kref_get(&gsm->ref); + spin_unlock_irqrestore(&gsm_mux_lock, flags); +} + +static inline void mux_put(struct gsm_mux *gsm) +{ + unsigned long flags; + + spin_lock_irqsave(&gsm_mux_lock, flags); + kref_put(&gsm->ref, gsm_free_muxr); + spin_unlock_irqrestore(&gsm_mux_lock, flags); +} + +static inline unsigned int mux_num_to_base(struct gsm_mux *gsm) +{ + return gsm->num * NUM_DLCI; +} + +static inline unsigned int mux_line_to_num(unsigned int line) +{ + return line / NUM_DLCI; +} + +/** + * gsm_alloc_mux - allocate a mux + * + * Creates a new mux ready for activation. + */ + +static struct gsm_mux *gsm_alloc_mux(void) +{ + int i; + struct gsm_mux *gsm = kzalloc(sizeof(struct gsm_mux), GFP_KERNEL); + if (gsm == NULL) + return NULL; + gsm->buf = kmalloc(MAX_MRU + 1, GFP_KERNEL); + if (gsm->buf == NULL) { + kfree(gsm); + return NULL; + } + gsm->txframe = kmalloc(2 * (MAX_MTU + PROT_OVERHEAD - 1), GFP_KERNEL); + if (gsm->txframe == NULL) { + kfree(gsm->buf); + kfree(gsm); + return NULL; + } + spin_lock_init(&gsm->lock); + mutex_init(&gsm->mutex); + kref_init(&gsm->ref); + INIT_LIST_HEAD(&gsm->tx_list); + timer_setup(&gsm->t2_timer, gsm_control_retransmit, 0); + init_waitqueue_head(&gsm->event); + spin_lock_init(&gsm->control_lock); + spin_lock_init(&gsm->tx_lock); + + gsm->t1 = T1; + gsm->t2 = T2; + gsm->n2 = N2; + gsm->ftype = UIH; + gsm->adaption = 1; + gsm->encoding = 1; + gsm->mru = 64; /* Default to encoding 1 so these should be 64 */ + gsm->mtu = 64; + gsm->dead = true; /* Avoid early tty opens */ + + /* Store the instance to the mux array or abort if no space is + * available. + */ + spin_lock(&gsm_mux_lock); + for (i = 0; i < MAX_MUX; i++) { + if (!gsm_mux[i]) { + gsm_mux[i] = gsm; + gsm->num = i; + break; + } + } + spin_unlock(&gsm_mux_lock); + if (i == MAX_MUX) { + mutex_destroy(&gsm->mutex); + kfree(gsm->txframe); + kfree(gsm->buf); + kfree(gsm); + return NULL; + } + + return gsm; +} + +static void gsm_copy_config_values(struct gsm_mux *gsm, + struct gsm_config *c) +{ + memset(c, 0, sizeof(*c)); + c->adaption = gsm->adaption; + c->encapsulation = gsm->encoding; + c->initiator = gsm->initiator; + c->t1 = gsm->t1; + c->t2 = gsm->t2; + c->t3 = 0; /* Not supported */ + c->n2 = gsm->n2; + if (gsm->ftype == UIH) + c->i = 1; + else + c->i = 2; + pr_debug("Ftype %d i %d\n", gsm->ftype, c->i); + c->mru = gsm->mru; + c->mtu = gsm->mtu; + c->k = 0; +} + +static int gsm_config(struct gsm_mux *gsm, struct gsm_config *c) +{ + int ret = 0; + int need_close = 0; + int need_restart = 0; + + /* Stuff we don't support yet - UI or I frame transport, windowing */ + if ((c->adaption != 1 && c->adaption != 2) || c->k) + return -EOPNOTSUPP; + /* Check the MRU/MTU range looks sane */ + if (c->mru > MAX_MRU || c->mtu > MAX_MTU || c->mru < 8 || c->mtu < 8) + return -EINVAL; + if (c->n2 > 255) + return -EINVAL; + if (c->encapsulation > 1) /* Basic, advanced, no I */ + return -EINVAL; + if (c->initiator > 1) + return -EINVAL; + if (c->i == 0 || c->i > 2) /* UIH and UI only */ + return -EINVAL; + /* + * See what is needed for reconfiguration + */ + + /* Timing fields */ + if (c->t1 != 0 && c->t1 != gsm->t1) + need_restart = 1; + if (c->t2 != 0 && c->t2 != gsm->t2) + need_restart = 1; + if (c->encapsulation != gsm->encoding) + need_restart = 1; + if (c->adaption != gsm->adaption) + need_restart = 1; + /* Requires care */ + if (c->initiator != gsm->initiator) + need_close = 1; + if (c->mru != gsm->mru) + need_restart = 1; + if (c->mtu != gsm->mtu) + need_restart = 1; + + /* + * Close down what is needed, restart and initiate the new + * configuration. On the first time there is no DLCI[0] + * and closing or cleaning up is not necessary. + */ + if (need_close || need_restart) + gsm_cleanup_mux(gsm, true); + + gsm->initiator = c->initiator; + gsm->mru = c->mru; + gsm->mtu = c->mtu; + gsm->encoding = c->encapsulation; + gsm->adaption = c->adaption; + gsm->n2 = c->n2; + + if (c->i == 1) + gsm->ftype = UIH; + else if (c->i == 2) + gsm->ftype = UI; + + if (c->t1) + gsm->t1 = c->t1; + if (c->t2) + gsm->t2 = c->t2; + + /* + * FIXME: We need to separate activation/deactivation from adding + * and removing from the mux array + */ + if (gsm->dead) { + ret = gsm_activate_mux(gsm); + if (ret) + return ret; + if (gsm->initiator) + gsm_dlci_begin_open(gsm->dlci[0]); + } + return 0; +} + +/** + * gsmld_output - write to link + * @gsm: our mux + * @data: bytes to output + * @len: size + * + * Write a block of data from the GSM mux to the data channel. This + * will eventually be serialized from above but at the moment isn't. + */ + +static int gsmld_output(struct gsm_mux *gsm, u8 *data, int len) +{ + if (tty_write_room(gsm->tty) < len) { + set_bit(TTY_DO_WRITE_WAKEUP, &gsm->tty->flags); + return -ENOSPC; + } + if (debug & 4) + print_hex_dump_bytes("gsmld_output: ", DUMP_PREFIX_OFFSET, + data, len); + gsm->tty->ops->write(gsm->tty, data, len); + return len; +} + +/** + * gsmld_attach_gsm - mode set up + * @tty: our tty structure + * @gsm: our mux + * + * Set up the MUX for basic mode and commence connecting to the + * modem. Currently called from the line discipline set up but + * will need moving to an ioctl path. + */ + +static void gsmld_attach_gsm(struct tty_struct *tty, struct gsm_mux *gsm) +{ + gsm->tty = tty_kref_get(tty); + /* Turn off tty XON/XOFF handling to handle it explicitly. */ + gsm->old_c_iflag = tty->termios.c_iflag; + tty->termios.c_iflag &= (IXON | IXOFF); +} + +/** + * gsmld_detach_gsm - stop doing 0710 mux + * @tty: tty attached to the mux + * @gsm: mux + * + * Shutdown and then clean up the resources used by the line discipline + */ + +static void gsmld_detach_gsm(struct tty_struct *tty, struct gsm_mux *gsm) +{ + WARN_ON(tty != gsm->tty); + /* Restore tty XON/XOFF handling. */ + gsm->tty->termios.c_iflag = gsm->old_c_iflag; + tty_kref_put(gsm->tty); + gsm->tty = NULL; +} + +static void gsmld_receive_buf(struct tty_struct *tty, const unsigned char *cp, + char *fp, int count) +{ + struct gsm_mux *gsm = tty->disc_data; + char flags = TTY_NORMAL; + + if (debug & 4) + print_hex_dump_bytes("gsmld_receive: ", DUMP_PREFIX_OFFSET, + cp, count); + + for (; count; count--, cp++) { + if (fp) + flags = *fp++; + switch (flags) { + case TTY_NORMAL: + if (gsm->receive) + gsm->receive(gsm, *cp); + break; + case TTY_OVERRUN: + case TTY_BREAK: + case TTY_PARITY: + case TTY_FRAME: + gsm_error(gsm, *cp, flags); + break; + default: + WARN_ONCE(1, "%s: unknown flag %d\n", + tty_name(tty), flags); + break; + } + } + /* FASYNC if needed ? */ + /* If clogged call tty_throttle(tty); */ +} + +/** + * gsmld_flush_buffer - clean input queue + * @tty: terminal device + * + * Flush the input buffer. Called when the line discipline is + * being closed, when the tty layer wants the buffer flushed (eg + * at hangup). + */ + +static void gsmld_flush_buffer(struct tty_struct *tty) +{ +} + +/** + * gsmld_close - close the ldisc for this tty + * @tty: device + * + * Called from the terminal layer when this line discipline is + * being shut down, either because of a close or becsuse of a + * discipline change. The function will not be called while other + * ldisc methods are in progress. + */ + +static void gsmld_close(struct tty_struct *tty) +{ + struct gsm_mux *gsm = tty->disc_data; + + /* The ldisc locks and closes the port before calling our close. This + * means we have no way to do a proper disconnect. We will not bother + * to do one. + */ + gsm_cleanup_mux(gsm, false); + + gsmld_detach_gsm(tty, gsm); + + gsmld_flush_buffer(tty); + /* Do other clean up here */ + mux_put(gsm); +} + +/** + * gsmld_open - open an ldisc + * @tty: terminal to open + * + * Called when this line discipline is being attached to the + * terminal device. Can sleep. Called serialized so that no + * other events will occur in parallel. No further open will occur + * until a close. + */ + +static int gsmld_open(struct tty_struct *tty) +{ + struct gsm_mux *gsm; + + if (tty->ops->write == NULL) + return -EINVAL; + + /* Attach our ldisc data */ + gsm = gsm_alloc_mux(); + if (gsm == NULL) + return -ENOMEM; + + tty->disc_data = gsm; + tty->receive_room = 65536; + + /* Attach the initial passive connection */ + gsm->encoding = 1; + + gsmld_attach_gsm(tty, gsm); + + timer_setup(&gsm->t2_timer, gsm_control_retransmit, 0); + + return 0; +} + +/** + * gsmld_write_wakeup - asynchronous I/O notifier + * @tty: tty device + * + * Required for the ptys, serial driver etc. since processes + * that attach themselves to the master and rely on ASYNC + * IO must be woken up + */ + +static void gsmld_write_wakeup(struct tty_struct *tty) +{ + struct gsm_mux *gsm = tty->disc_data; + unsigned long flags; + + /* Queue poll */ + clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); + spin_lock_irqsave(&gsm->tx_lock, flags); + gsm_data_kick(gsm, NULL); + if (gsm->tx_bytes < TX_THRESH_LO) { + gsm_dlci_data_sweep(gsm); + } + spin_unlock_irqrestore(&gsm->tx_lock, flags); +} + +/** + * gsmld_read - read function for tty + * @tty: tty device + * @file: file object + * @buf: userspace buffer pointer + * @nr: size of I/O + * + * Perform reads for the line discipline. We are guaranteed that the + * line discipline will not be closed under us but we may get multiple + * parallel readers and must handle this ourselves. We may also get + * a hangup. Always called in user context, may sleep. + * + * This code must be sure never to sleep through a hangup. + */ + +static ssize_t gsmld_read(struct tty_struct *tty, struct file *file, + unsigned char *buf, size_t nr, + void **cookie, unsigned long offset) +{ + return -EOPNOTSUPP; +} + +/** + * gsmld_write - write function for tty + * @tty: tty device + * @file: file object + * @buf: userspace buffer pointer + * @nr: size of I/O + * + * Called when the owner of the device wants to send a frame + * itself (or some other control data). The data is transferred + * as-is and must be properly framed and checksummed as appropriate + * by userspace. Frames are either sent whole or not at all as this + * avoids pain user side. + */ + +static ssize_t gsmld_write(struct tty_struct *tty, struct file *file, + const unsigned char *buf, size_t nr) +{ + struct gsm_mux *gsm = tty->disc_data; + unsigned long flags; + int space; + int ret; + + if (!gsm) + return -ENODEV; + + ret = -ENOBUFS; + spin_lock_irqsave(&gsm->tx_lock, flags); + space = tty_write_room(tty); + if (space >= nr) + ret = tty->ops->write(tty, buf, nr); + else + set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); + spin_unlock_irqrestore(&gsm->tx_lock, flags); + + return ret; +} + +/** + * gsmld_poll - poll method for N_GSM0710 + * @tty: terminal device + * @file: file accessing it + * @wait: poll table + * + * Called when the line discipline is asked to poll() for data or + * for special events. This code is not serialized with respect to + * other events save open/close. + * + * This code must be sure never to sleep through a hangup. + * Called without the kernel lock held - fine + */ + +static __poll_t gsmld_poll(struct tty_struct *tty, struct file *file, + poll_table *wait) +{ + __poll_t mask = 0; + struct gsm_mux *gsm = tty->disc_data; + + poll_wait(file, &tty->read_wait, wait); + poll_wait(file, &tty->write_wait, wait); + + if (gsm->dead) + mask |= EPOLLHUP; + if (tty_hung_up_p(file)) + mask |= EPOLLHUP; + if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) + mask |= EPOLLHUP; + if (!tty_is_writelocked(tty) && tty_write_room(tty) > 0) + mask |= EPOLLOUT | EPOLLWRNORM; + return mask; +} + +static int gsmld_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct gsm_config c; + struct gsm_mux *gsm = tty->disc_data; + unsigned int base; + + switch (cmd) { + case GSMIOC_GETCONF: + gsm_copy_config_values(gsm, &c); + if (copy_to_user((void __user *)arg, &c, sizeof(c))) + return -EFAULT; + return 0; + case GSMIOC_SETCONF: + if (copy_from_user(&c, (void __user *)arg, sizeof(c))) + return -EFAULT; + return gsm_config(gsm, &c); + case GSMIOC_GETFIRST: + base = mux_num_to_base(gsm); + return put_user(base + 1, (__u32 __user *)arg); + default: + return n_tty_ioctl_helper(tty, file, cmd, arg); + } +} + +/* + * Network interface + * + */ + +static int gsm_mux_net_open(struct net_device *net) +{ + pr_debug("%s called\n", __func__); + netif_start_queue(net); + return 0; +} + +static int gsm_mux_net_close(struct net_device *net) +{ + netif_stop_queue(net); + return 0; +} + +static void dlci_net_free(struct gsm_dlci *dlci) +{ + if (!dlci->net) { + WARN_ON(1); + return; + } + dlci->adaption = dlci->prev_adaption; + dlci->data = dlci->prev_data; + free_netdev(dlci->net); + dlci->net = NULL; +} +static void net_free(struct kref *ref) +{ + struct gsm_mux_net *mux_net; + struct gsm_dlci *dlci; + + mux_net = container_of(ref, struct gsm_mux_net, ref); + dlci = mux_net->dlci; + + if (dlci->net) { + unregister_netdev(dlci->net); + dlci_net_free(dlci); + } +} + +static inline void muxnet_get(struct gsm_mux_net *mux_net) +{ + kref_get(&mux_net->ref); +} + +static inline void muxnet_put(struct gsm_mux_net *mux_net) +{ + kref_put(&mux_net->ref, net_free); +} + +static netdev_tx_t gsm_mux_net_start_xmit(struct sk_buff *skb, + struct net_device *net) +{ + struct gsm_mux_net *mux_net = netdev_priv(net); + struct gsm_dlci *dlci = mux_net->dlci; + muxnet_get(mux_net); + + skb_queue_head(&dlci->skb_list, skb); + net->stats.tx_packets++; + net->stats.tx_bytes += skb->len; + gsm_dlci_data_kick(dlci); + /* And tell the kernel when the last transmit started. */ + netif_trans_update(net); + muxnet_put(mux_net); + return NETDEV_TX_OK; +} + +/* called when a packet did not ack after watchdogtimeout */ +static void gsm_mux_net_tx_timeout(struct net_device *net, unsigned int txqueue) +{ + /* Tell syslog we are hosed. */ + dev_dbg(&net->dev, "Tx timed out.\n"); + + /* Update statistics */ + net->stats.tx_errors++; +} + +static void gsm_mux_rx_netchar(struct gsm_dlci *dlci, + const unsigned char *in_buf, int size) +{ + struct net_device *net = dlci->net; + struct sk_buff *skb; + struct gsm_mux_net *mux_net = netdev_priv(net); + muxnet_get(mux_net); + + /* Allocate an sk_buff */ + skb = dev_alloc_skb(size + NET_IP_ALIGN); + if (!skb) { + /* We got no receive buffer. */ + net->stats.rx_dropped++; + muxnet_put(mux_net); + return; + } + skb_reserve(skb, NET_IP_ALIGN); + skb_put_data(skb, in_buf, size); + + skb->dev = net; + skb->protocol = htons(ETH_P_IP); + + /* Ship it off to the kernel */ + netif_rx(skb); + + /* update out statistics */ + net->stats.rx_packets++; + net->stats.rx_bytes += size; + muxnet_put(mux_net); + return; +} + +static void gsm_mux_net_init(struct net_device *net) +{ + static const struct net_device_ops gsm_netdev_ops = { + .ndo_open = gsm_mux_net_open, + .ndo_stop = gsm_mux_net_close, + .ndo_start_xmit = gsm_mux_net_start_xmit, + .ndo_tx_timeout = gsm_mux_net_tx_timeout, + }; + + net->netdev_ops = &gsm_netdev_ops; + + /* fill in the other fields */ + net->watchdog_timeo = GSM_NET_TX_TIMEOUT; + net->flags = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST; + net->type = ARPHRD_NONE; + net->tx_queue_len = 10; +} + + +/* caller holds the dlci mutex */ +static void gsm_destroy_network(struct gsm_dlci *dlci) +{ + struct gsm_mux_net *mux_net; + + pr_debug("destroy network interface\n"); + if (!dlci->net) + return; + mux_net = netdev_priv(dlci->net); + muxnet_put(mux_net); +} + + +/* caller holds the dlci mutex */ +static int gsm_create_network(struct gsm_dlci *dlci, struct gsm_netconfig *nc) +{ + char *netname; + int retval = 0; + struct net_device *net; + struct gsm_mux_net *mux_net; + + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + + /* Already in a non tty mode */ + if (dlci->adaption > 2) + return -EBUSY; + + if (nc->protocol != htons(ETH_P_IP)) + return -EPROTONOSUPPORT; + + if (nc->adaption != 3 && nc->adaption != 4) + return -EPROTONOSUPPORT; + + pr_debug("create network interface\n"); + + netname = "gsm%d"; + if (nc->if_name[0] != '\0') + netname = nc->if_name; + net = alloc_netdev(sizeof(struct gsm_mux_net), netname, + NET_NAME_UNKNOWN, gsm_mux_net_init); + if (!net) { + pr_err("alloc_netdev failed\n"); + return -ENOMEM; + } + net->mtu = dlci->gsm->mtu; + net->min_mtu = 8; + net->max_mtu = dlci->gsm->mtu; + mux_net = netdev_priv(net); + mux_net->dlci = dlci; + kref_init(&mux_net->ref); + strncpy(nc->if_name, net->name, IFNAMSIZ); /* return net name */ + + /* reconfigure dlci for network */ + dlci->prev_adaption = dlci->adaption; + dlci->prev_data = dlci->data; + dlci->adaption = nc->adaption; + dlci->data = gsm_mux_rx_netchar; + dlci->net = net; + + pr_debug("register netdev\n"); + retval = register_netdev(net); + if (retval) { + pr_err("network register fail %d\n", retval); + dlci_net_free(dlci); + return retval; + } + return net->ifindex; /* return network index */ +} + +/* Line discipline for real tty */ +static struct tty_ldisc_ops tty_ldisc_packet = { + .owner = THIS_MODULE, + .magic = TTY_LDISC_MAGIC, + .name = "n_gsm", + .open = gsmld_open, + .close = gsmld_close, + .flush_buffer = gsmld_flush_buffer, + .read = gsmld_read, + .write = gsmld_write, + .ioctl = gsmld_ioctl, + .poll = gsmld_poll, + .receive_buf = gsmld_receive_buf, + .write_wakeup = gsmld_write_wakeup +}; + +/* + * Virtual tty side + */ + +#define TX_SIZE 512 + +static int gsmtty_modem_update(struct gsm_dlci *dlci, u8 brk) +{ + u8 modembits[3]; + struct gsm_control *ctrl; + int len = 2; + + modembits[0] = (dlci->addr << 2) | 2 | EA; /* DLCI, Valid, EA */ + modembits[1] = (gsm_encode_modem(dlci) << 1) | EA; + if (brk) { + modembits[2] = (brk << 4) | 2 | EA; /* Length, Break, EA */ + len++; + } + ctrl = gsm_control_send(dlci->gsm, CMD_MSC, modembits, len); + if (ctrl == NULL) + return -ENOMEM; + return gsm_control_wait(dlci->gsm, ctrl); +} + +static int gsm_carrier_raised(struct tty_port *port) +{ + struct gsm_dlci *dlci = container_of(port, struct gsm_dlci, port); + struct gsm_mux *gsm = dlci->gsm; + + /* Not yet open so no carrier info */ + if (dlci->state != DLCI_OPEN) + return 0; + if (debug & 2) + return 1; + + /* + * Basic mode with control channel in ADM mode may not respond + * to CMD_MSC at all and modem_rx is empty. + */ + if (gsm->encoding == 0 && gsm->dlci[0]->mode == DLCI_MODE_ADM && + !dlci->modem_rx) + return 1; + + return dlci->modem_rx & TIOCM_CD; +} + +static void gsm_dtr_rts(struct tty_port *port, int onoff) +{ + struct gsm_dlci *dlci = container_of(port, struct gsm_dlci, port); + unsigned int modem_tx = dlci->modem_tx; + if (onoff) + modem_tx |= TIOCM_DTR | TIOCM_RTS; + else + modem_tx &= ~(TIOCM_DTR | TIOCM_RTS); + if (modem_tx != dlci->modem_tx) { + dlci->modem_tx = modem_tx; + gsmtty_modem_update(dlci, 0); + } +} + +static const struct tty_port_operations gsm_port_ops = { + .carrier_raised = gsm_carrier_raised, + .dtr_rts = gsm_dtr_rts, + .destruct = gsm_dlci_free, +}; + +static int gsmtty_install(struct tty_driver *driver, struct tty_struct *tty) +{ + struct gsm_mux *gsm; + struct gsm_dlci *dlci; + unsigned int line = tty->index; + unsigned int mux = mux_line_to_num(line); + bool alloc = false; + int ret; + + line = line & 0x3F; + + if (mux >= MAX_MUX) + return -ENXIO; + /* FIXME: we need to lock gsm_mux for lifetimes of ttys eventually */ + if (gsm_mux[mux] == NULL) + return -EUNATCH; + if (line == 0 || line > 61) /* 62/63 reserved */ + return -ECHRNG; + gsm = gsm_mux[mux]; + if (gsm->dead) + return -EL2HLT; + /* If DLCI 0 is not yet fully open return an error. + This is ok from a locking + perspective as we don't have to worry about this + if DLCI0 is lost */ + mutex_lock(&gsm->mutex); + if (gsm->dlci[0] && gsm->dlci[0]->state != DLCI_OPEN) { + mutex_unlock(&gsm->mutex); + return -EL2NSYNC; + } + dlci = gsm->dlci[line]; + if (dlci == NULL) { + alloc = true; + dlci = gsm_dlci_alloc(gsm, line); + } + if (dlci == NULL) { + mutex_unlock(&gsm->mutex); + return -ENOMEM; + } + ret = tty_port_install(&dlci->port, driver, tty); + if (ret) { + if (alloc) + dlci_put(dlci); + mutex_unlock(&gsm->mutex); + return ret; + } + + dlci_get(dlci); + dlci_get(gsm->dlci[0]); + mux_get(gsm); + tty->driver_data = dlci; + mutex_unlock(&gsm->mutex); + + return 0; +} + +static int gsmtty_open(struct tty_struct *tty, struct file *filp) +{ + struct gsm_dlci *dlci = tty->driver_data; + struct tty_port *port = &dlci->port; + struct gsm_mux *gsm = dlci->gsm; + + port->count++; + tty_port_tty_set(port, tty); + + dlci->modem_rx = 0; + /* We could in theory open and close before we wait - eg if we get + a DM straight back. This is ok as that will have caused a hangup */ + tty_port_set_initialized(port, 1); + /* Start sending off SABM messages */ + if (gsm->initiator) + gsm_dlci_begin_open(dlci); + else + gsm_dlci_set_opening(dlci); + /* And wait for virtual carrier */ + return tty_port_block_til_ready(port, tty, filp); +} + +static void gsmtty_close(struct tty_struct *tty, struct file *filp) +{ + struct gsm_dlci *dlci = tty->driver_data; + + if (dlci == NULL) + return; + if (dlci->state == DLCI_CLOSED) + return; + mutex_lock(&dlci->mutex); + gsm_destroy_network(dlci); + mutex_unlock(&dlci->mutex); + if (tty_port_close_start(&dlci->port, tty, filp) == 0) + return; + gsm_dlci_begin_close(dlci); + if (tty_port_initialized(&dlci->port) && C_HUPCL(tty)) + tty_port_lower_dtr_rts(&dlci->port); + tty_port_close_end(&dlci->port, tty); + tty_port_tty_set(&dlci->port, NULL); + return; +} + +static void gsmtty_hangup(struct tty_struct *tty) +{ + struct gsm_dlci *dlci = tty->driver_data; + if (dlci->state == DLCI_CLOSED) + return; + tty_port_hangup(&dlci->port); + gsm_dlci_begin_close(dlci); +} + +static int gsmtty_write(struct tty_struct *tty, const unsigned char *buf, + int len) +{ + int sent; + struct gsm_dlci *dlci = tty->driver_data; + if (dlci->state == DLCI_CLOSED) + return -EINVAL; + /* Stuff the bytes into the fifo queue */ + sent = kfifo_in_locked(&dlci->fifo, buf, len, &dlci->lock); + /* Need to kick the channel */ + gsm_dlci_data_kick(dlci); + return sent; +} + +static int gsmtty_write_room(struct tty_struct *tty) +{ + struct gsm_dlci *dlci = tty->driver_data; + if (dlci->state == DLCI_CLOSED) + return -EINVAL; + return TX_SIZE - kfifo_len(&dlci->fifo); +} + +static int gsmtty_chars_in_buffer(struct tty_struct *tty) +{ + struct gsm_dlci *dlci = tty->driver_data; + if (dlci->state == DLCI_CLOSED) + return -EINVAL; + return kfifo_len(&dlci->fifo); +} + +static void gsmtty_flush_buffer(struct tty_struct *tty) +{ + struct gsm_dlci *dlci = tty->driver_data; + unsigned long flags; + + if (dlci->state == DLCI_CLOSED) + return; + /* Caution needed: If we implement reliable transport classes + then the data being transmitted can't simply be junked once + it has first hit the stack. Until then we can just blow it + away */ + spin_lock_irqsave(&dlci->lock, flags); + kfifo_reset(&dlci->fifo); + spin_unlock_irqrestore(&dlci->lock, flags); + /* Need to unhook this DLCI from the transmit queue logic */ +} + +static void gsmtty_wait_until_sent(struct tty_struct *tty, int timeout) +{ + /* The FIFO handles the queue so the kernel will do the right + thing waiting on chars_in_buffer before calling us. No work + to do here */ +} + +static int gsmtty_tiocmget(struct tty_struct *tty) +{ + struct gsm_dlci *dlci = tty->driver_data; + if (dlci->state == DLCI_CLOSED) + return -EINVAL; + return dlci->modem_rx; +} + +static int gsmtty_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct gsm_dlci *dlci = tty->driver_data; + unsigned int modem_tx = dlci->modem_tx; + + if (dlci->state == DLCI_CLOSED) + return -EINVAL; + modem_tx &= ~clear; + modem_tx |= set; + + if (modem_tx != dlci->modem_tx) { + dlci->modem_tx = modem_tx; + return gsmtty_modem_update(dlci, 0); + } + return 0; +} + + +static int gsmtty_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct gsm_dlci *dlci = tty->driver_data; + struct gsm_netconfig nc; + int index; + + if (dlci->state == DLCI_CLOSED) + return -EINVAL; + switch (cmd) { + case GSMIOC_ENABLE_NET: + if (copy_from_user(&nc, (void __user *)arg, sizeof(nc))) + return -EFAULT; + nc.if_name[IFNAMSIZ-1] = '\0'; + /* return net interface index or error code */ + mutex_lock(&dlci->mutex); + index = gsm_create_network(dlci, &nc); + mutex_unlock(&dlci->mutex); + if (copy_to_user((void __user *)arg, &nc, sizeof(nc))) + return -EFAULT; + return index; + case GSMIOC_DISABLE_NET: + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + mutex_lock(&dlci->mutex); + gsm_destroy_network(dlci); + mutex_unlock(&dlci->mutex); + return 0; + default: + return -ENOIOCTLCMD; + } +} + +static void gsmtty_set_termios(struct tty_struct *tty, struct ktermios *old) +{ + struct gsm_dlci *dlci = tty->driver_data; + if (dlci->state == DLCI_CLOSED) + return; + /* For the moment its fixed. In actual fact the speed information + for the virtual channel can be propogated in both directions by + the RPN control message. This however rapidly gets nasty as we + then have to remap modem signals each way according to whether + our virtual cable is null modem etc .. */ + tty_termios_copy_hw(&tty->termios, old); +} + +static void gsmtty_throttle(struct tty_struct *tty) +{ + struct gsm_dlci *dlci = tty->driver_data; + if (dlci->state == DLCI_CLOSED) + return; + if (C_CRTSCTS(tty)) + dlci->modem_tx &= ~TIOCM_RTS; + dlci->throttled = true; + /* Send an MSC with RTS cleared */ + gsmtty_modem_update(dlci, 0); +} + +static void gsmtty_unthrottle(struct tty_struct *tty) +{ + struct gsm_dlci *dlci = tty->driver_data; + if (dlci->state == DLCI_CLOSED) + return; + if (C_CRTSCTS(tty)) + dlci->modem_tx |= TIOCM_RTS; + dlci->throttled = false; + /* Send an MSC with RTS set */ + gsmtty_modem_update(dlci, 0); +} + +static int gsmtty_break_ctl(struct tty_struct *tty, int state) +{ + struct gsm_dlci *dlci = tty->driver_data; + int encode = 0; /* Off */ + if (dlci->state == DLCI_CLOSED) + return -EINVAL; + + if (state == -1) /* "On indefinitely" - we can't encode this + properly */ + encode = 0x0F; + else if (state > 0) { + encode = state / 200; /* mS to encoding */ + if (encode > 0x0F) + encode = 0x0F; /* Best effort */ + } + return gsmtty_modem_update(dlci, encode); +} + +static void gsmtty_cleanup(struct tty_struct *tty) +{ + struct gsm_dlci *dlci = tty->driver_data; + struct gsm_mux *gsm = dlci->gsm; + + dlci_put(dlci); + dlci_put(gsm->dlci[0]); + mux_put(gsm); +} + +/* Virtual ttys for the demux */ +static const struct tty_operations gsmtty_ops = { + .install = gsmtty_install, + .open = gsmtty_open, + .close = gsmtty_close, + .write = gsmtty_write, + .write_room = gsmtty_write_room, + .chars_in_buffer = gsmtty_chars_in_buffer, + .flush_buffer = gsmtty_flush_buffer, + .ioctl = gsmtty_ioctl, + .throttle = gsmtty_throttle, + .unthrottle = gsmtty_unthrottle, + .set_termios = gsmtty_set_termios, + .hangup = gsmtty_hangup, + .wait_until_sent = gsmtty_wait_until_sent, + .tiocmget = gsmtty_tiocmget, + .tiocmset = gsmtty_tiocmset, + .break_ctl = gsmtty_break_ctl, + .cleanup = gsmtty_cleanup, +}; + + + +static int __init gsm_init(void) +{ + /* Fill in our line protocol discipline, and register it */ + int status = tty_register_ldisc(N_GSM0710, &tty_ldisc_packet); + if (status != 0) { + pr_err("n_gsm: can't register line discipline (err = %d)\n", + status); + return status; + } + + gsm_tty_driver = alloc_tty_driver(256); + if (!gsm_tty_driver) { + tty_unregister_ldisc(N_GSM0710); + pr_err("gsm_init: tty allocation failed.\n"); + return -EINVAL; + } + gsm_tty_driver->driver_name = "gsmtty"; + gsm_tty_driver->name = "gsmtty"; + gsm_tty_driver->major = 0; /* Dynamic */ + gsm_tty_driver->minor_start = 0; + gsm_tty_driver->type = TTY_DRIVER_TYPE_SERIAL; + gsm_tty_driver->subtype = SERIAL_TYPE_NORMAL; + gsm_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV + | TTY_DRIVER_HARDWARE_BREAK; + gsm_tty_driver->init_termios = tty_std_termios; + /* Fixme */ + gsm_tty_driver->init_termios.c_lflag &= ~ECHO; + tty_set_operations(gsm_tty_driver, &gsmtty_ops); + + spin_lock_init(&gsm_mux_lock); + + if (tty_register_driver(gsm_tty_driver)) { + put_tty_driver(gsm_tty_driver); + tty_unregister_ldisc(N_GSM0710); + pr_err("gsm_init: tty registration failed.\n"); + return -EBUSY; + } + pr_debug("gsm_init: loaded as %d,%d.\n", + gsm_tty_driver->major, gsm_tty_driver->minor_start); + return 0; +} + +static void __exit gsm_exit(void) +{ + int status = tty_unregister_ldisc(N_GSM0710); + if (status != 0) + pr_err("n_gsm: can't unregister line discipline (err = %d)\n", + status); + tty_unregister_driver(gsm_tty_driver); + put_tty_driver(gsm_tty_driver); +} + +module_init(gsm_init); +module_exit(gsm_exit); + + +MODULE_LICENSE("GPL"); +MODULE_ALIAS_LDISC(N_GSM0710); diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c new file mode 100644 index 000000000..697199a3c --- /dev/null +++ b/drivers/tty/n_hdlc.c @@ -0,0 +1,862 @@ +// SPDX-License-Identifier: GPL-1.0+ +/* generic HDLC line discipline for Linux + * + * Written by Paul Fulghum paulkf@microgate.com + * for Microgate Corporation + * + * Microgate and SyncLink are registered trademarks of Microgate Corporation + * + * Adapted from ppp.c, written by Michael Callahan , + * Al Longyear , + * Paul Mackerras + * + * Original release 01/11/99 + * + * This module implements the tty line discipline N_HDLC for use with + * tty device drivers that support bit-synchronous HDLC communications. + * + * All HDLC data is frame oriented which means: + * + * 1. tty write calls represent one complete transmit frame of data + * The device driver should accept the complete frame or none of + * the frame (busy) in the write method. Each write call should have + * a byte count in the range of 2-65535 bytes (2 is min HDLC frame + * with 1 addr byte and 1 ctrl byte). The max byte count of 65535 + * should include any crc bytes required. For example, when using + * CCITT CRC32, 4 crc bytes are required, so the maximum size frame + * the application may transmit is limited to 65531 bytes. For CCITT + * CRC16, the maximum application frame size would be 65533. + * + * + * 2. receive callbacks from the device driver represents + * one received frame. The device driver should bypass + * the tty flip buffer and call the line discipline receive + * callback directly to avoid fragmenting or concatenating + * multiple frames into a single receive callback. + * + * The HDLC line discipline queues the receive frames in separate + * buffers so complete receive frames can be returned by the + * tty read calls. + * + * 3. tty read calls returns an entire frame of data or nothing. + * + * 4. all send and receive data is considered raw. No processing + * or translation is performed by the line discipline, regardless + * of the tty flags + * + * 5. When line discipline is queried for the amount of receive + * data available (FIOC), 0 is returned if no data available, + * otherwise the count of the next available frame is returned. + * (instead of the sum of all received frame counts). + * + * These conventions allow the standard tty programming interface + * to be used for synchronous HDLC applications when used with + * this line discipline (or another line discipline that is frame + * oriented such as N_PPP). + * + * The SyncLink driver (synclink.c) implements both asynchronous + * (using standard line discipline N_TTY) and synchronous HDLC + * (using N_HDLC) communications, with the latter using the above + * conventions. + * + * This implementation is very basic and does not maintain + * any statistics. The main point is to enforce the raw data + * and frame orientation of HDLC communications. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#define HDLC_MAGIC 0x239e + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include /* used in new tty drivers */ +#include /* used in new tty drivers */ +#include +#include + +#include +#include +#include "tty.h" + +/* + * Buffers for individual HDLC frames + */ +#define MAX_HDLC_FRAME_SIZE 65535 +#define DEFAULT_RX_BUF_COUNT 10 +#define MAX_RX_BUF_COUNT 60 +#define DEFAULT_TX_BUF_COUNT 3 + +struct n_hdlc_buf { + struct list_head list_item; + int count; + char buf[]; +}; + +struct n_hdlc_buf_list { + struct list_head list; + int count; + spinlock_t spinlock; +}; + +/** + * struct n_hdlc - per device instance data structure + * @magic: magic value for structure + * @tbusy: reentrancy flag for tx wakeup code + * @woke_up: tx wakeup needs to be run again as it was called while @tbusy + * @tx_buf_list: list of pending transmit frame buffers + * @rx_buf_list: list of received frame buffers + * @tx_free_buf_list: list unused transmit frame buffers + * @rx_free_buf_list: list unused received frame buffers + */ +struct n_hdlc { + int magic; + bool tbusy; + bool woke_up; + struct n_hdlc_buf_list tx_buf_list; + struct n_hdlc_buf_list rx_buf_list; + struct n_hdlc_buf_list tx_free_buf_list; + struct n_hdlc_buf_list rx_free_buf_list; + struct work_struct write_work; + struct tty_struct *tty_for_write_work; +}; + +/* + * HDLC buffer list manipulation functions + */ +static void n_hdlc_buf_return(struct n_hdlc_buf_list *buf_list, + struct n_hdlc_buf *buf); +static void n_hdlc_buf_put(struct n_hdlc_buf_list *list, + struct n_hdlc_buf *buf); +static struct n_hdlc_buf *n_hdlc_buf_get(struct n_hdlc_buf_list *list); + +/* Local functions */ + +static struct n_hdlc *n_hdlc_alloc(void); +static void n_hdlc_tty_write_work(struct work_struct *work); + +/* max frame size for memory allocations */ +static int maxframe = 4096; + +static void flush_rx_queue(struct tty_struct *tty) +{ + struct n_hdlc *n_hdlc = tty->disc_data; + struct n_hdlc_buf *buf; + + while ((buf = n_hdlc_buf_get(&n_hdlc->rx_buf_list))) + n_hdlc_buf_put(&n_hdlc->rx_free_buf_list, buf); +} + +static void flush_tx_queue(struct tty_struct *tty) +{ + struct n_hdlc *n_hdlc = tty->disc_data; + struct n_hdlc_buf *buf; + + while ((buf = n_hdlc_buf_get(&n_hdlc->tx_buf_list))) + n_hdlc_buf_put(&n_hdlc->tx_free_buf_list, buf); +} + +static void n_hdlc_free_buf_list(struct n_hdlc_buf_list *list) +{ + struct n_hdlc_buf *buf; + + do { + buf = n_hdlc_buf_get(list); + kfree(buf); + } while (buf); +} + +/** + * n_hdlc_tty_close - line discipline close + * @tty: pointer to tty info structure + * + * Called when the line discipline is changed to something + * else, the tty is closed, or the tty detects a hangup. + */ +static void n_hdlc_tty_close(struct tty_struct *tty) +{ + struct n_hdlc *n_hdlc = tty->disc_data; + + if (n_hdlc->magic != HDLC_MAGIC) { + pr_warn("n_hdlc: trying to close unopened tty!\n"); + return; + } +#if defined(TTY_NO_WRITE_SPLIT) + clear_bit(TTY_NO_WRITE_SPLIT, &tty->flags); +#endif + tty->disc_data = NULL; + + /* Ensure that the n_hdlcd process is not hanging on select()/poll() */ + wake_up_interruptible(&tty->read_wait); + wake_up_interruptible(&tty->write_wait); + + cancel_work_sync(&n_hdlc->write_work); + + n_hdlc_free_buf_list(&n_hdlc->rx_free_buf_list); + n_hdlc_free_buf_list(&n_hdlc->tx_free_buf_list); + n_hdlc_free_buf_list(&n_hdlc->rx_buf_list); + n_hdlc_free_buf_list(&n_hdlc->tx_buf_list); + kfree(n_hdlc); +} /* end of n_hdlc_tty_close() */ + +/** + * n_hdlc_tty_open - called when line discipline changed to n_hdlc + * @tty: pointer to tty info structure + * + * Returns 0 if success, otherwise error code + */ +static int n_hdlc_tty_open(struct tty_struct *tty) +{ + struct n_hdlc *n_hdlc = tty->disc_data; + + pr_debug("%s() called (device=%s)\n", __func__, tty->name); + + /* There should not be an existing table for this slot. */ + if (n_hdlc) { + pr_err("%s: tty already associated!\n", __func__); + return -EEXIST; + } + + n_hdlc = n_hdlc_alloc(); + if (!n_hdlc) { + pr_err("%s: n_hdlc_alloc failed\n", __func__); + return -ENFILE; + } + + INIT_WORK(&n_hdlc->write_work, n_hdlc_tty_write_work); + n_hdlc->tty_for_write_work = tty; + tty->disc_data = n_hdlc; + tty->receive_room = 65536; + + /* change tty_io write() to not split large writes into 8K chunks */ + set_bit(TTY_NO_WRITE_SPLIT, &tty->flags); + + /* flush receive data from driver */ + tty_driver_flush_buffer(tty); + + return 0; + +} /* end of n_tty_hdlc_open() */ + +/** + * n_hdlc_send_frames - send frames on pending send buffer list + * @n_hdlc: pointer to ldisc instance data + * @tty: pointer to tty instance data + * + * Send frames on pending send buffer list until the driver does not accept a + * frame (busy) this function is called after adding a frame to the send buffer + * list and by the tty wakeup callback. + */ +static void n_hdlc_send_frames(struct n_hdlc *n_hdlc, struct tty_struct *tty) +{ + register int actual; + unsigned long flags; + struct n_hdlc_buf *tbuf; + +check_again: + + spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags); + if (n_hdlc->tbusy) { + n_hdlc->woke_up = true; + spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags); + return; + } + n_hdlc->tbusy = true; + n_hdlc->woke_up = false; + spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags); + + tbuf = n_hdlc_buf_get(&n_hdlc->tx_buf_list); + while (tbuf) { + pr_debug("sending frame %p, count=%d\n", tbuf, tbuf->count); + + /* Send the next block of data to device */ + set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); + actual = tty->ops->write(tty, tbuf->buf, tbuf->count); + + /* rollback was possible and has been done */ + if (actual == -ERESTARTSYS) { + n_hdlc_buf_return(&n_hdlc->tx_buf_list, tbuf); + break; + } + /* if transmit error, throw frame away by */ + /* pretending it was accepted by driver */ + if (actual < 0) + actual = tbuf->count; + + if (actual == tbuf->count) { + pr_debug("frame %p completed\n", tbuf); + + /* free current transmit buffer */ + n_hdlc_buf_put(&n_hdlc->tx_free_buf_list, tbuf); + + /* wait up sleeping writers */ + wake_up_interruptible(&tty->write_wait); + + /* get next pending transmit buffer */ + tbuf = n_hdlc_buf_get(&n_hdlc->tx_buf_list); + } else { + pr_debug("frame %p pending\n", tbuf); + + /* + * the buffer was not accepted by driver, + * return it back into tx queue + */ + n_hdlc_buf_return(&n_hdlc->tx_buf_list, tbuf); + break; + } + } + + if (!tbuf) + clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); + + /* Clear the re-entry flag */ + spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags); + n_hdlc->tbusy = false; + spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags); + + if (n_hdlc->woke_up) + goto check_again; +} /* end of n_hdlc_send_frames() */ + +/** + * n_hdlc_tty_write_work - Asynchronous callback for transmit wakeup + * @work: pointer to work_struct + * + * Called when low level device driver can accept more send data. + */ +static void n_hdlc_tty_write_work(struct work_struct *work) +{ + struct n_hdlc *n_hdlc = container_of(work, struct n_hdlc, write_work); + struct tty_struct *tty = n_hdlc->tty_for_write_work; + + n_hdlc_send_frames(n_hdlc, tty); +} /* end of n_hdlc_tty_write_work() */ + +/** + * n_hdlc_tty_wakeup - Callback for transmit wakeup + * @tty: pointer to associated tty instance data + * + * Called when low level device driver can accept more send data. + */ +static void n_hdlc_tty_wakeup(struct tty_struct *tty) +{ + struct n_hdlc *n_hdlc = tty->disc_data; + + schedule_work(&n_hdlc->write_work); +} /* end of n_hdlc_tty_wakeup() */ + +/** + * n_hdlc_tty_receive - Called by tty driver when receive data is available + * @tty: pointer to tty instance data + * @data: pointer to received data + * @flags: pointer to flags for data + * @count: count of received data in bytes + * + * Called by tty low level driver when receive data is available. Data is + * interpreted as one HDLC frame. + */ +static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *data, + char *flags, int count) +{ + register struct n_hdlc *n_hdlc = tty->disc_data; + register struct n_hdlc_buf *buf; + + pr_debug("%s() called count=%d\n", __func__, count); + + /* verify line is using HDLC discipline */ + if (n_hdlc->magic != HDLC_MAGIC) { + pr_err("line not using HDLC discipline\n"); + return; + } + + if (count > maxframe) { + pr_debug("rx count>maxframesize, data discarded\n"); + return; + } + + /* get a free HDLC buffer */ + buf = n_hdlc_buf_get(&n_hdlc->rx_free_buf_list); + if (!buf) { + /* + * no buffers in free list, attempt to allocate another rx + * buffer unless the maximum count has been reached + */ + if (n_hdlc->rx_buf_list.count < MAX_RX_BUF_COUNT) + buf = kmalloc(struct_size(buf, buf, maxframe), + GFP_ATOMIC); + } + + if (!buf) { + pr_debug("no more rx buffers, data discarded\n"); + return; + } + + /* copy received data to HDLC buffer */ + memcpy(buf->buf, data, count); + buf->count = count; + + /* add HDLC buffer to list of received frames */ + n_hdlc_buf_put(&n_hdlc->rx_buf_list, buf); + + /* wake up any blocked reads and perform async signalling */ + wake_up_interruptible(&tty->read_wait); + if (tty->fasync != NULL) + kill_fasync(&tty->fasync, SIGIO, POLL_IN); + +} /* end of n_hdlc_tty_receive() */ + +/** + * n_hdlc_tty_read - Called to retrieve one frame of data (if available) + * @tty: pointer to tty instance data + * @file: pointer to open file object + * @buf: pointer to returned data buffer + * @nr: size of returned data buffer + * + * Returns the number of bytes returned or error code. + */ +static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file, + __u8 *kbuf, size_t nr, + void **cookie, unsigned long offset) +{ + struct n_hdlc *n_hdlc = tty->disc_data; + int ret = 0; + struct n_hdlc_buf *rbuf; + DECLARE_WAITQUEUE(wait, current); + + /* Is this a repeated call for an rbuf we already found earlier? */ + rbuf = *cookie; + if (rbuf) + goto have_rbuf; + + add_wait_queue(&tty->read_wait, &wait); + + for (;;) { + if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) { + ret = -EIO; + break; + } + if (tty_hung_up_p(file)) + break; + + set_current_state(TASK_INTERRUPTIBLE); + + rbuf = n_hdlc_buf_get(&n_hdlc->rx_buf_list); + if (rbuf) + break; + + /* no data */ + if (tty_io_nonblock(tty, file)) { + ret = -EAGAIN; + break; + } + + schedule(); + + if (signal_pending(current)) { + ret = -EINTR; + break; + } + } + + remove_wait_queue(&tty->read_wait, &wait); + __set_current_state(TASK_RUNNING); + + if (!rbuf) + return ret; + *cookie = rbuf; + +have_rbuf: + /* Have we used it up entirely? */ + if (offset >= rbuf->count) + goto done_with_rbuf; + + /* More data to go, but can't copy any more? EOVERFLOW */ + ret = -EOVERFLOW; + if (!nr) + goto done_with_rbuf; + + /* Copy as much data as possible */ + ret = rbuf->count - offset; + if (ret > nr) + ret = nr; + memcpy(kbuf, rbuf->buf+offset, ret); + offset += ret; + + /* If we still have data left, we leave the rbuf in the cookie */ + if (offset < rbuf->count) + return ret; + +done_with_rbuf: + *cookie = NULL; + + if (n_hdlc->rx_free_buf_list.count > DEFAULT_RX_BUF_COUNT) + kfree(rbuf); + else + n_hdlc_buf_put(&n_hdlc->rx_free_buf_list, rbuf); + + return ret; + +} /* end of n_hdlc_tty_read() */ + +/** + * n_hdlc_tty_write - write a single frame of data to device + * @tty: pointer to associated tty device instance data + * @file: pointer to file object data + * @data: pointer to transmit data (one frame) + * @count: size of transmit frame in bytes + * + * Returns the number of bytes written (or error code). + */ +static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file, + const unsigned char *data, size_t count) +{ + struct n_hdlc *n_hdlc = tty->disc_data; + int error = 0; + DECLARE_WAITQUEUE(wait, current); + struct n_hdlc_buf *tbuf; + + pr_debug("%s() called count=%zd\n", __func__, count); + + if (n_hdlc->magic != HDLC_MAGIC) + return -EIO; + + /* verify frame size */ + if (count > maxframe) { + pr_debug("%s: truncating user packet from %zu to %d\n", + __func__, count, maxframe); + count = maxframe; + } + + add_wait_queue(&tty->write_wait, &wait); + + for (;;) { + set_current_state(TASK_INTERRUPTIBLE); + + tbuf = n_hdlc_buf_get(&n_hdlc->tx_free_buf_list); + if (tbuf) + break; + + if (tty_io_nonblock(tty, file)) { + error = -EAGAIN; + break; + } + schedule(); + + if (signal_pending(current)) { + error = -EINTR; + break; + } + } + + __set_current_state(TASK_RUNNING); + remove_wait_queue(&tty->write_wait, &wait); + + if (!error) { + /* Retrieve the user's buffer */ + memcpy(tbuf->buf, data, count); + + /* Send the data */ + tbuf->count = error = count; + n_hdlc_buf_put(&n_hdlc->tx_buf_list, tbuf); + n_hdlc_send_frames(n_hdlc, tty); + } + + return error; + +} /* end of n_hdlc_tty_write() */ + +/** + * n_hdlc_tty_ioctl - process IOCTL system call for the tty device. + * @tty: pointer to tty instance data + * @file: pointer to open file object for device + * @cmd: IOCTL command code + * @arg: argument for IOCTL call (cmd dependent) + * + * Returns command dependent result. + */ +static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct n_hdlc *n_hdlc = tty->disc_data; + int error = 0; + int count; + unsigned long flags; + struct n_hdlc_buf *buf = NULL; + + pr_debug("%s() called %d\n", __func__, cmd); + + /* Verify the status of the device */ + if (n_hdlc->magic != HDLC_MAGIC) + return -EBADF; + + switch (cmd) { + case FIONREAD: + /* report count of read data available */ + /* in next available frame (if any) */ + spin_lock_irqsave(&n_hdlc->rx_buf_list.spinlock, flags); + buf = list_first_entry_or_null(&n_hdlc->rx_buf_list.list, + struct n_hdlc_buf, list_item); + if (buf) + count = buf->count; + else + count = 0; + spin_unlock_irqrestore(&n_hdlc->rx_buf_list.spinlock, flags); + error = put_user(count, (int __user *)arg); + break; + + case TIOCOUTQ: + /* get the pending tx byte count in the driver */ + count = tty_chars_in_buffer(tty); + /* add size of next output frame in queue */ + spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags); + buf = list_first_entry_or_null(&n_hdlc->tx_buf_list.list, + struct n_hdlc_buf, list_item); + if (buf) + count += buf->count; + spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags); + error = put_user(count, (int __user *)arg); + break; + + case TCFLSH: + switch (arg) { + case TCIOFLUSH: + case TCOFLUSH: + flush_tx_queue(tty); + } + fallthrough; /* to default */ + + default: + error = n_tty_ioctl_helper(tty, file, cmd, arg); + break; + } + return error; + +} /* end of n_hdlc_tty_ioctl() */ + +/** + * n_hdlc_tty_poll - TTY callback for poll system call + * @tty: pointer to tty instance data + * @filp: pointer to open file object for device + * @wait: wait queue for operations + * + * Determine which operations (read/write) will not block and return info + * to caller. + * Returns a bit mask containing info on which ops will not block. + */ +static __poll_t n_hdlc_tty_poll(struct tty_struct *tty, struct file *filp, + poll_table *wait) +{ + struct n_hdlc *n_hdlc = tty->disc_data; + __poll_t mask = 0; + + if (n_hdlc->magic != HDLC_MAGIC) + return 0; + + /* + * queue the current process into any wait queue that may awaken in the + * future (read and write) + */ + poll_wait(filp, &tty->read_wait, wait); + poll_wait(filp, &tty->write_wait, wait); + + /* set bits for operations that won't block */ + if (!list_empty(&n_hdlc->rx_buf_list.list)) + mask |= EPOLLIN | EPOLLRDNORM; /* readable */ + if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) + mask |= EPOLLHUP; + if (tty_hung_up_p(filp)) + mask |= EPOLLHUP; + if (!tty_is_writelocked(tty) && + !list_empty(&n_hdlc->tx_free_buf_list.list)) + mask |= EPOLLOUT | EPOLLWRNORM; /* writable */ + + return mask; +} /* end of n_hdlc_tty_poll() */ + +static void n_hdlc_alloc_buf(struct n_hdlc_buf_list *list, unsigned int count, + const char *name) +{ + struct n_hdlc_buf *buf; + unsigned int i; + + for (i = 0; i < count; i++) { + buf = kmalloc(struct_size(buf, buf, maxframe), GFP_KERNEL); + if (!buf) { + pr_debug("%s(), kmalloc() failed for %s buffer %u\n", + __func__, name, i); + return; + } + n_hdlc_buf_put(list, buf); + } +} + +/** + * n_hdlc_alloc - allocate an n_hdlc instance data structure + * + * Returns a pointer to newly created structure if success, otherwise %NULL + */ +static struct n_hdlc *n_hdlc_alloc(void) +{ + struct n_hdlc *n_hdlc = kzalloc(sizeof(*n_hdlc), GFP_KERNEL); + + if (!n_hdlc) + return NULL; + + spin_lock_init(&n_hdlc->rx_free_buf_list.spinlock); + spin_lock_init(&n_hdlc->tx_free_buf_list.spinlock); + spin_lock_init(&n_hdlc->rx_buf_list.spinlock); + spin_lock_init(&n_hdlc->tx_buf_list.spinlock); + + INIT_LIST_HEAD(&n_hdlc->rx_free_buf_list.list); + INIT_LIST_HEAD(&n_hdlc->tx_free_buf_list.list); + INIT_LIST_HEAD(&n_hdlc->rx_buf_list.list); + INIT_LIST_HEAD(&n_hdlc->tx_buf_list.list); + + n_hdlc_alloc_buf(&n_hdlc->rx_free_buf_list, DEFAULT_RX_BUF_COUNT, "rx"); + n_hdlc_alloc_buf(&n_hdlc->tx_free_buf_list, DEFAULT_TX_BUF_COUNT, "tx"); + + /* Initialize the control block */ + n_hdlc->magic = HDLC_MAGIC; + + return n_hdlc; + +} /* end of n_hdlc_alloc() */ + +/** + * n_hdlc_buf_return - put the HDLC buffer after the head of the specified list + * @buf_list: pointer to the buffer list + * @buf: pointer to the buffer + */ +static void n_hdlc_buf_return(struct n_hdlc_buf_list *buf_list, + struct n_hdlc_buf *buf) +{ + unsigned long flags; + + spin_lock_irqsave(&buf_list->spinlock, flags); + + list_add(&buf->list_item, &buf_list->list); + buf_list->count++; + + spin_unlock_irqrestore(&buf_list->spinlock, flags); +} + +/** + * n_hdlc_buf_put - add specified HDLC buffer to tail of specified list + * @buf_list: pointer to buffer list + * @buf: pointer to buffer + */ +static void n_hdlc_buf_put(struct n_hdlc_buf_list *buf_list, + struct n_hdlc_buf *buf) +{ + unsigned long flags; + + spin_lock_irqsave(&buf_list->spinlock, flags); + + list_add_tail(&buf->list_item, &buf_list->list); + buf_list->count++; + + spin_unlock_irqrestore(&buf_list->spinlock, flags); +} /* end of n_hdlc_buf_put() */ + +/** + * n_hdlc_buf_get - remove and return an HDLC buffer from list + * @buf_list: pointer to HDLC buffer list + * + * Remove and return an HDLC buffer from the head of the specified HDLC buffer + * list. + * Returns a pointer to HDLC buffer if available, otherwise %NULL. + */ +static struct n_hdlc_buf *n_hdlc_buf_get(struct n_hdlc_buf_list *buf_list) +{ + unsigned long flags; + struct n_hdlc_buf *buf; + + spin_lock_irqsave(&buf_list->spinlock, flags); + + buf = list_first_entry_or_null(&buf_list->list, + struct n_hdlc_buf, list_item); + if (buf) { + list_del(&buf->list_item); + buf_list->count--; + } + + spin_unlock_irqrestore(&buf_list->spinlock, flags); + return buf; +} /* end of n_hdlc_buf_get() */ + +static struct tty_ldisc_ops n_hdlc_ldisc = { + .owner = THIS_MODULE, + .magic = TTY_LDISC_MAGIC, + .name = "hdlc", + .open = n_hdlc_tty_open, + .close = n_hdlc_tty_close, + .read = n_hdlc_tty_read, + .write = n_hdlc_tty_write, + .ioctl = n_hdlc_tty_ioctl, + .poll = n_hdlc_tty_poll, + .receive_buf = n_hdlc_tty_receive, + .write_wakeup = n_hdlc_tty_wakeup, + .flush_buffer = flush_rx_queue, +}; + +static int __init n_hdlc_init(void) +{ + int status; + + /* range check maxframe arg */ + maxframe = clamp(maxframe, 4096, MAX_HDLC_FRAME_SIZE); + + status = tty_register_ldisc(N_HDLC, &n_hdlc_ldisc); + if (!status) + pr_info("N_HDLC line discipline registered with maxframe=%d\n", + maxframe); + else + pr_err("N_HDLC: error registering line discipline: %d\n", + status); + + return status; + +} /* end of init_module() */ + +static void __exit n_hdlc_exit(void) +{ + /* Release tty registration of line discipline */ + int status = tty_unregister_ldisc(N_HDLC); + + if (status) + pr_err("N_HDLC: can't unregister line discipline (err = %d)\n", + status); + else + pr_info("N_HDLC: line discipline unregistered\n"); +} + +module_init(n_hdlc_init); +module_exit(n_hdlc_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Paul Fulghum paulkf@microgate.com"); +module_param(maxframe, int, 0); +MODULE_ALIAS_LDISC(N_HDLC); diff --git a/drivers/tty/n_null.c b/drivers/tty/n_null.c new file mode 100644 index 000000000..ce03ae78f --- /dev/null +++ b/drivers/tty/n_null.c @@ -0,0 +1,69 @@ +// SPDX-License-Identifier: GPL-2.0 +#include +#include +#include +#include + +/* + * n_null.c - Null line discipline used in the failure path + * + * Copyright (C) Intel 2017 + */ + +static int n_null_open(struct tty_struct *tty) +{ + return 0; +} + +static void n_null_close(struct tty_struct *tty) +{ +} + +static ssize_t n_null_read(struct tty_struct *tty, struct file *file, + unsigned char *buf, size_t nr, + void **cookie, unsigned long offset) +{ + return -EOPNOTSUPP; +} + +static ssize_t n_null_write(struct tty_struct *tty, struct file *file, + const unsigned char *buf, size_t nr) +{ + return -EOPNOTSUPP; +} + +static void n_null_receivebuf(struct tty_struct *tty, + const unsigned char *cp, char *fp, + int cnt) +{ +} + +static struct tty_ldisc_ops null_ldisc = { + .owner = THIS_MODULE, + .magic = TTY_LDISC_MAGIC, + .name = "n_null", + .open = n_null_open, + .close = n_null_close, + .read = n_null_read, + .write = n_null_write, + .receive_buf = n_null_receivebuf +}; + +static int __init n_null_init(void) +{ + BUG_ON(tty_register_ldisc(N_NULL, &null_ldisc)); + return 0; +} + +static void __exit n_null_exit(void) +{ + tty_unregister_ldisc(N_NULL); +} + +module_init(n_null_init); +module_exit(n_null_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Alan Cox"); +MODULE_ALIAS_LDISC(N_NULL); +MODULE_DESCRIPTION("Null ldisc driver"); diff --git a/drivers/tty/n_r3964.c b/drivers/tty/n_r3964.c new file mode 100644 index 000000000..3161f0a53 --- /dev/null +++ b/drivers/tty/n_r3964.c @@ -0,0 +1,1284 @@ +// SPDX-License-Identifier: GPL-1.0+ +/* r3964 linediscipline for linux + * + * ----------------------------------------------------------- + * Copyright by + * Philips Automation Projects + * Kassel (Germany) + * ----------------------------------------------------------- + * Author: + * L. Haag + * + * $Log: n_r3964.c,v $ + * Revision 1.10 2001/03/18 13:02:24 dwmw2 + * Fix timer usage, use spinlocks properly. + * + * Revision 1.9 2001/03/18 12:52:14 dwmw2 + * Merge changes in 2.4.2 + * + * Revision 1.8 2000/03/23 14:14:54 dwmw2 + * Fix race in sleeping in r3964_read() + * + * Revision 1.7 1999/28/08 11:41:50 dwmw2 + * Port to 2.3 kernel + * + * Revision 1.6 1998/09/30 00:40:40 dwmw2 + * Fixed compilation on 2.0.x kernels + * Updated to newly registered tty-ldisc number 9 + * + * Revision 1.5 1998/09/04 21:57:36 dwmw2 + * Signal handling bug fixes, port to 2.1.x. + * + * Revision 1.4 1998/04/02 20:26:59 lhaag + * select, blocking, ... + * + * Revision 1.3 1998/02/12 18:58:43 root + * fixed some memory leaks + * calculation of checksum characters + * + * Revision 1.2 1998/02/07 13:03:34 root + * ioctl read_telegram + * + * Revision 1.1 1998/02/06 19:21:03 root + * Initial revision + * + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include /* used in new tty drivers */ +#include /* used in new tty drivers */ +#include +#include +#include +#include +#include + +/*#define DEBUG_QUEUE*/ + +/* Log successful handshake and protocol operations */ +/*#define DEBUG_PROTO_S*/ + +/* Log handshake and protocol errors: */ +/*#define DEBUG_PROTO_E*/ + +/* Log Linediscipline operations (open, close, read, write...): */ +/*#define DEBUG_LDISC*/ + +/* Log module and memory operations (init, cleanup; kmalloc, kfree): */ +/*#define DEBUG_MODUL*/ + +/* Macro helpers for debug output: */ +#define TRACE(format, args...) printk("r3964: " format "\n" , ## args) + +#ifdef DEBUG_MODUL +#define TRACE_M(format, args...) printk("r3964: " format "\n" , ## args) +#else +#define TRACE_M(fmt, arg...) do {} while (0) +#endif +#ifdef DEBUG_PROTO_S +#define TRACE_PS(format, args...) printk("r3964: " format "\n" , ## args) +#else +#define TRACE_PS(fmt, arg...) do {} while (0) +#endif +#ifdef DEBUG_PROTO_E +#define TRACE_PE(format, args...) printk("r3964: " format "\n" , ## args) +#else +#define TRACE_PE(fmt, arg...) do {} while (0) +#endif +#ifdef DEBUG_LDISC +#define TRACE_L(format, args...) printk("r3964: " format "\n" , ## args) +#else +#define TRACE_L(fmt, arg...) do {} while (0) +#endif +#ifdef DEBUG_QUEUE +#define TRACE_Q(format, args...) printk("r3964: " format "\n" , ## args) +#else +#define TRACE_Q(fmt, arg...) do {} while (0) +#endif +static void add_tx_queue(struct r3964_info *, struct r3964_block_header *); +static void remove_from_tx_queue(struct r3964_info *pInfo, int error_code); +static void put_char(struct r3964_info *pInfo, unsigned char ch); +static void trigger_transmit(struct r3964_info *pInfo); +static void retry_transmit(struct r3964_info *pInfo); +static void transmit_block(struct r3964_info *pInfo); +static void receive_char(struct r3964_info *pInfo, const unsigned char c); +static void receive_error(struct r3964_info *pInfo, const char flag); +static void on_timeout(struct timer_list *t); +static int enable_signals(struct r3964_info *pInfo, struct pid *pid, int arg); +static int read_telegram(struct r3964_info *pInfo, struct pid *pid, + unsigned char __user * buf); +static void add_msg(struct r3964_client_info *pClient, int msg_id, int arg, + int error_code, struct r3964_block_header *pBlock); +static struct r3964_message *remove_msg(struct r3964_info *pInfo, + struct r3964_client_info *pClient); +static void remove_client_block(struct r3964_info *pInfo, + struct r3964_client_info *pClient); + +static int r3964_open(struct tty_struct *tty); +static void r3964_close(struct tty_struct *tty); +static ssize_t r3964_read(struct tty_struct *tty, struct file *file, + void *cookie, unsigned char *buf, size_t nr); +static ssize_t r3964_write(struct tty_struct *tty, struct file *file, + const unsigned char *buf, size_t nr); +static int r3964_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg); +#ifdef CONFIG_COMPAT +static int r3964_compat_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg); +#endif +static void r3964_set_termios(struct tty_struct *tty, struct ktermios *old); +static __poll_t r3964_poll(struct tty_struct *tty, struct file *file, + struct poll_table_struct *wait); +static void r3964_receive_buf(struct tty_struct *tty, const unsigned char *cp, + char *fp, int count); + +static struct tty_ldisc_ops tty_ldisc_N_R3964 = { + .owner = THIS_MODULE, + .magic = TTY_LDISC_MAGIC, + .name = "R3964", + .open = r3964_open, + .close = r3964_close, + .read = r3964_read, + .write = r3964_write, + .ioctl = r3964_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = r3964_compat_ioctl, +#endif + .set_termios = r3964_set_termios, + .poll = r3964_poll, + .receive_buf = r3964_receive_buf, +}; + +static void dump_block(const unsigned char *block, unsigned int length) +{ + unsigned int i, j; + char linebuf[16 * 3 + 1]; + + for (i = 0; i < length; i += 16) { + for (j = 0; (j < 16) && (j + i < length); j++) { + sprintf(linebuf + 3 * j, "%02x ", block[i + j]); + } + linebuf[3 * j] = '\0'; + TRACE_PS("%s", linebuf); + } +} + +/************************************************************* + * Driver initialisation + *************************************************************/ + +/************************************************************* + * Module support routines + *************************************************************/ + +static void __exit r3964_exit(void) +{ + int status; + + TRACE_M("cleanup_module()"); + + status = tty_unregister_ldisc(N_R3964); + + if (status != 0) { + printk(KERN_ERR "r3964: error unregistering linediscipline: " + "%d\n", status); + } else { + TRACE_L("linediscipline successfully unregistered"); + } +} + +static int __init r3964_init(void) +{ + int status; + + printk("r3964: Philips r3964 Driver $Revision: 1.10 $\n"); + + /* + * Register the tty line discipline + */ + + status = tty_register_ldisc(N_R3964, &tty_ldisc_N_R3964); + if (status == 0) { + TRACE_L("line discipline %d registered", N_R3964); + TRACE_L("flags=%x num=%x", tty_ldisc_N_R3964.flags, + tty_ldisc_N_R3964.num); + TRACE_L("open=%p", tty_ldisc_N_R3964.open); + TRACE_L("tty_ldisc_N_R3964 = %p", &tty_ldisc_N_R3964); + } else { + printk(KERN_ERR "r3964: error registering line discipline: " + "%d\n", status); + } + return status; +} + +module_init(r3964_init); +module_exit(r3964_exit); + +/************************************************************* + * Protocol implementation routines + *************************************************************/ + +static void add_tx_queue(struct r3964_info *pInfo, + struct r3964_block_header *pHeader) +{ + unsigned long flags; + + spin_lock_irqsave(&pInfo->lock, flags); + + pHeader->next = NULL; + + if (pInfo->tx_last == NULL) { + pInfo->tx_first = pInfo->tx_last = pHeader; + } else { + pInfo->tx_last->next = pHeader; + pInfo->tx_last = pHeader; + } + + spin_unlock_irqrestore(&pInfo->lock, flags); + + TRACE_Q("add_tx_queue %p, length %d, tx_first = %p", + pHeader, pHeader->length, pInfo->tx_first); +} + +static void remove_from_tx_queue(struct r3964_info *pInfo, int error_code) +{ + struct r3964_block_header *pHeader; + unsigned long flags; +#ifdef DEBUG_QUEUE + struct r3964_block_header *pDump; +#endif + + pHeader = pInfo->tx_first; + + if (pHeader == NULL) + return; + +#ifdef DEBUG_QUEUE + printk("r3964: remove_from_tx_queue: %p, length %u - ", + pHeader, pHeader->length); + for (pDump = pHeader; pDump; pDump = pDump->next) + printk("%p ", pDump); + printk("\n"); +#endif + + if (pHeader->owner) { + if (error_code) { + add_msg(pHeader->owner, R3964_MSG_ACK, 0, + error_code, NULL); + } else { + add_msg(pHeader->owner, R3964_MSG_ACK, pHeader->length, + error_code, NULL); + } + wake_up_interruptible(&pInfo->tty->read_wait); + } + + spin_lock_irqsave(&pInfo->lock, flags); + + pInfo->tx_first = pHeader->next; + if (pInfo->tx_first == NULL) { + pInfo->tx_last = NULL; + } + + spin_unlock_irqrestore(&pInfo->lock, flags); + + kfree(pHeader); + TRACE_M("remove_from_tx_queue - kfree %p", pHeader); + + TRACE_Q("remove_from_tx_queue: tx_first = %p, tx_last = %p", + pInfo->tx_first, pInfo->tx_last); +} + +static void add_rx_queue(struct r3964_info *pInfo, + struct r3964_block_header *pHeader) +{ + unsigned long flags; + + spin_lock_irqsave(&pInfo->lock, flags); + + pHeader->next = NULL; + + if (pInfo->rx_last == NULL) { + pInfo->rx_first = pInfo->rx_last = pHeader; + } else { + pInfo->rx_last->next = pHeader; + pInfo->rx_last = pHeader; + } + pInfo->blocks_in_rx_queue++; + + spin_unlock_irqrestore(&pInfo->lock, flags); + + TRACE_Q("add_rx_queue: %p, length = %d, rx_first = %p, count = %d", + pHeader, pHeader->length, + pInfo->rx_first, pInfo->blocks_in_rx_queue); +} + +static void remove_from_rx_queue(struct r3964_info *pInfo, + struct r3964_block_header *pHeader) +{ + unsigned long flags; + struct r3964_block_header *pFind; + + if (pHeader == NULL) + return; + + TRACE_Q("remove_from_rx_queue: rx_first = %p, rx_last = %p, count = %d", + pInfo->rx_first, pInfo->rx_last, pInfo->blocks_in_rx_queue); + TRACE_Q("remove_from_rx_queue: %p, length %u", + pHeader, pHeader->length); + + spin_lock_irqsave(&pInfo->lock, flags); + + if (pInfo->rx_first == pHeader) { + /* Remove the first block in the linked list: */ + pInfo->rx_first = pHeader->next; + + if (pInfo->rx_first == NULL) { + pInfo->rx_last = NULL; + } + pInfo->blocks_in_rx_queue--; + } else { + /* Find block to remove: */ + for (pFind = pInfo->rx_first; pFind; pFind = pFind->next) { + if (pFind->next == pHeader) { + /* Got it. */ + pFind->next = pHeader->next; + pInfo->blocks_in_rx_queue--; + if (pFind->next == NULL) { + /* Oh, removed the last one! */ + pInfo->rx_last = pFind; + } + break; + } + } + } + + spin_unlock_irqrestore(&pInfo->lock, flags); + + kfree(pHeader); + TRACE_M("remove_from_rx_queue - kfree %p", pHeader); + + TRACE_Q("remove_from_rx_queue: rx_first = %p, rx_last = %p, count = %d", + pInfo->rx_first, pInfo->rx_last, pInfo->blocks_in_rx_queue); +} + +static void put_char(struct r3964_info *pInfo, unsigned char ch) +{ + struct tty_struct *tty = pInfo->tty; + /* FIXME: put_char should not be called from an IRQ */ + tty_put_char(tty, ch); + pInfo->bcc ^= ch; +} + +static void flush(struct r3964_info *pInfo) +{ + struct tty_struct *tty = pInfo->tty; + + if (tty == NULL || tty->ops->flush_chars == NULL) + return; + tty->ops->flush_chars(tty); +} + +static void trigger_transmit(struct r3964_info *pInfo) +{ + unsigned long flags; + + spin_lock_irqsave(&pInfo->lock, flags); + + if ((pInfo->state == R3964_IDLE) && (pInfo->tx_first != NULL)) { + pInfo->state = R3964_TX_REQUEST; + pInfo->nRetry = 0; + pInfo->flags &= ~R3964_ERROR; + mod_timer(&pInfo->tmr, jiffies + R3964_TO_QVZ); + + spin_unlock_irqrestore(&pInfo->lock, flags); + + TRACE_PS("trigger_transmit - sent STX"); + + put_char(pInfo, STX); + flush(pInfo); + + pInfo->bcc = 0; + } else { + spin_unlock_irqrestore(&pInfo->lock, flags); + } +} + +static void retry_transmit(struct r3964_info *pInfo) +{ + if (pInfo->nRetry < R3964_MAX_RETRIES) { + TRACE_PE("transmission failed. Retry #%d", pInfo->nRetry); + pInfo->bcc = 0; + put_char(pInfo, STX); + flush(pInfo); + pInfo->state = R3964_TX_REQUEST; + pInfo->nRetry++; + mod_timer(&pInfo->tmr, jiffies + R3964_TO_QVZ); + } else { + TRACE_PE("transmission failed after %d retries", + R3964_MAX_RETRIES); + + remove_from_tx_queue(pInfo, R3964_TX_FAIL); + + put_char(pInfo, NAK); + flush(pInfo); + pInfo->state = R3964_IDLE; + + trigger_transmit(pInfo); + } +} + +static void transmit_block(struct r3964_info *pInfo) +{ + struct tty_struct *tty = pInfo->tty; + struct r3964_block_header *pBlock = pInfo->tx_first; + int room = 0; + + if (tty == NULL || pBlock == NULL) { + return; + } + + room = tty_write_room(tty); + + TRACE_PS("transmit_block %p, room %d, length %d", + pBlock, room, pBlock->length); + + while (pInfo->tx_position < pBlock->length) { + if (room < 2) + break; + + if (pBlock->data[pInfo->tx_position] == DLE) { + /* send additional DLE char: */ + put_char(pInfo, DLE); + } + put_char(pInfo, pBlock->data[pInfo->tx_position++]); + + room--; + } + + if ((pInfo->tx_position == pBlock->length) && (room >= 3)) { + put_char(pInfo, DLE); + put_char(pInfo, ETX); + if (pInfo->flags & R3964_BCC) { + put_char(pInfo, pInfo->bcc); + } + pInfo->state = R3964_WAIT_FOR_TX_ACK; + mod_timer(&pInfo->tmr, jiffies + R3964_TO_QVZ); + } + flush(pInfo); +} + +static void on_receive_block(struct r3964_info *pInfo) +{ + unsigned int length; + struct r3964_client_info *pClient; + struct r3964_block_header *pBlock; + + length = pInfo->rx_position; + + /* compare byte checksum characters: */ + if (pInfo->flags & R3964_BCC) { + if (pInfo->bcc != pInfo->last_rx) { + TRACE_PE("checksum error - got %x but expected %x", + pInfo->last_rx, pInfo->bcc); + pInfo->flags |= R3964_CHECKSUM; + } + } + + /* check for errors (parity, overrun,...): */ + if (pInfo->flags & R3964_ERROR) { + TRACE_PE("on_receive_block - transmission failed error %x", + pInfo->flags & R3964_ERROR); + + put_char(pInfo, NAK); + flush(pInfo); + if (pInfo->nRetry < R3964_MAX_RETRIES) { + pInfo->state = R3964_WAIT_FOR_RX_REPEAT; + pInfo->nRetry++; + mod_timer(&pInfo->tmr, jiffies + R3964_TO_RX_PANIC); + } else { + TRACE_PE("on_receive_block - failed after max retries"); + pInfo->state = R3964_IDLE; + } + return; + } + + /* received block; submit DLE: */ + put_char(pInfo, DLE); + flush(pInfo); + del_timer_sync(&pInfo->tmr); + TRACE_PS(" rx success: got %d chars", length); + + /* prepare struct r3964_block_header: */ + pBlock = kmalloc(length + sizeof(struct r3964_block_header), + GFP_KERNEL); + TRACE_M("on_receive_block - kmalloc %p", pBlock); + + if (pBlock == NULL) + return; + + pBlock->length = length; + pBlock->data = ((unsigned char *)pBlock) + + sizeof(struct r3964_block_header); + pBlock->locks = 0; + pBlock->next = NULL; + pBlock->owner = NULL; + + memcpy(pBlock->data, pInfo->rx_buf, length); + + /* queue block into rx_queue: */ + add_rx_queue(pInfo, pBlock); + + /* notify attached client processes: */ + for (pClient = pInfo->firstClient; pClient; pClient = pClient->next) { + if (pClient->sig_flags & R3964_SIG_DATA) { + add_msg(pClient, R3964_MSG_DATA, length, R3964_OK, + pBlock); + } + } + wake_up_interruptible(&pInfo->tty->read_wait); + + pInfo->state = R3964_IDLE; + + trigger_transmit(pInfo); +} + +static void receive_char(struct r3964_info *pInfo, const unsigned char c) +{ + switch (pInfo->state) { + case R3964_TX_REQUEST: + if (c == DLE) { + TRACE_PS("TX_REQUEST - got DLE"); + + pInfo->state = R3964_TRANSMITTING; + pInfo->tx_position = 0; + + transmit_block(pInfo); + } else if (c == STX) { + if (pInfo->nRetry == 0) { + TRACE_PE("TX_REQUEST - init conflict"); + if (pInfo->priority == R3964_SLAVE) { + goto start_receiving; + } + } else { + TRACE_PE("TX_REQUEST - secondary init " + "conflict!? Switching to SLAVE mode " + "for next rx."); + goto start_receiving; + } + } else { + TRACE_PE("TX_REQUEST - char != DLE: %x", c); + retry_transmit(pInfo); + } + break; + case R3964_TRANSMITTING: + if (c == NAK) { + TRACE_PE("TRANSMITTING - got NAK"); + retry_transmit(pInfo); + } else { + TRACE_PE("TRANSMITTING - got invalid char"); + + pInfo->state = R3964_WAIT_ZVZ_BEFORE_TX_RETRY; + mod_timer(&pInfo->tmr, jiffies + R3964_TO_ZVZ); + } + break; + case R3964_WAIT_FOR_TX_ACK: + if (c == DLE) { + TRACE_PS("WAIT_FOR_TX_ACK - got DLE"); + remove_from_tx_queue(pInfo, R3964_OK); + + pInfo->state = R3964_IDLE; + trigger_transmit(pInfo); + } else { + retry_transmit(pInfo); + } + break; + case R3964_WAIT_FOR_RX_REPEAT: + case R3964_IDLE: + if (c == STX) { + /* Prevent rx_queue from overflow: */ + if (pInfo->blocks_in_rx_queue >= + R3964_MAX_BLOCKS_IN_RX_QUEUE) { + TRACE_PE("IDLE - got STX but no space in " + "rx_queue!"); + pInfo->state = R3964_WAIT_FOR_RX_BUF; + mod_timer(&pInfo->tmr, + jiffies + R3964_TO_NO_BUF); + break; + } +start_receiving: + /* Ok, start receiving: */ + TRACE_PS("IDLE - got STX"); + pInfo->rx_position = 0; + pInfo->last_rx = 0; + pInfo->flags &= ~R3964_ERROR; + pInfo->state = R3964_RECEIVING; + mod_timer(&pInfo->tmr, jiffies + R3964_TO_ZVZ); + pInfo->nRetry = 0; + put_char(pInfo, DLE); + flush(pInfo); + pInfo->bcc = 0; + } + break; + case R3964_RECEIVING: + if (pInfo->rx_position < RX_BUF_SIZE) { + pInfo->bcc ^= c; + + if (c == DLE) { + if (pInfo->last_rx == DLE) { + pInfo->last_rx = 0; + goto char_to_buf; + } + pInfo->last_rx = DLE; + break; + } else if ((c == ETX) && (pInfo->last_rx == DLE)) { + if (pInfo->flags & R3964_BCC) { + pInfo->state = R3964_WAIT_FOR_BCC; + mod_timer(&pInfo->tmr, + jiffies + R3964_TO_ZVZ); + } else { + on_receive_block(pInfo); + } + } else { + pInfo->last_rx = c; +char_to_buf: + pInfo->rx_buf[pInfo->rx_position++] = c; + mod_timer(&pInfo->tmr, jiffies + R3964_TO_ZVZ); + } + } + /* else: overflow-msg? BUF_SIZE>MTU; should not happen? */ + break; + case R3964_WAIT_FOR_BCC: + pInfo->last_rx = c; + on_receive_block(pInfo); + break; + } +} + +static void receive_error(struct r3964_info *pInfo, const char flag) +{ + switch (flag) { + case TTY_NORMAL: + break; + case TTY_BREAK: + TRACE_PE("received break"); + pInfo->flags |= R3964_BREAK; + break; + case TTY_PARITY: + TRACE_PE("parity error"); + pInfo->flags |= R3964_PARITY; + break; + case TTY_FRAME: + TRACE_PE("frame error"); + pInfo->flags |= R3964_FRAME; + break; + case TTY_OVERRUN: + TRACE_PE("frame overrun"); + pInfo->flags |= R3964_OVERRUN; + break; + default: + TRACE_PE("receive_error - unknown flag %d", flag); + pInfo->flags |= R3964_UNKNOWN; + break; + } +} + +static void on_timeout(struct timer_list *t) +{ + struct r3964_info *pInfo = from_timer(pInfo, t, tmr); + + switch (pInfo->state) { + case R3964_TX_REQUEST: + TRACE_PE("TX_REQUEST - timeout"); + retry_transmit(pInfo); + break; + case R3964_WAIT_ZVZ_BEFORE_TX_RETRY: + put_char(pInfo, NAK); + flush(pInfo); + retry_transmit(pInfo); + break; + case R3964_WAIT_FOR_TX_ACK: + TRACE_PE("WAIT_FOR_TX_ACK - timeout"); + retry_transmit(pInfo); + break; + case R3964_WAIT_FOR_RX_BUF: + TRACE_PE("WAIT_FOR_RX_BUF - timeout"); + put_char(pInfo, NAK); + flush(pInfo); + pInfo->state = R3964_IDLE; + break; + case R3964_RECEIVING: + TRACE_PE("RECEIVING - timeout after %d chars", + pInfo->rx_position); + put_char(pInfo, NAK); + flush(pInfo); + pInfo->state = R3964_IDLE; + break; + case R3964_WAIT_FOR_RX_REPEAT: + TRACE_PE("WAIT_FOR_RX_REPEAT - timeout"); + pInfo->state = R3964_IDLE; + break; + case R3964_WAIT_FOR_BCC: + TRACE_PE("WAIT_FOR_BCC - timeout"); + put_char(pInfo, NAK); + flush(pInfo); + pInfo->state = R3964_IDLE; + break; + } +} + +static struct r3964_client_info *findClient(struct r3964_info *pInfo, + struct pid *pid) +{ + struct r3964_client_info *pClient; + + for (pClient = pInfo->firstClient; pClient; pClient = pClient->next) { + if (pClient->pid == pid) { + return pClient; + } + } + return NULL; +} + +static int enable_signals(struct r3964_info *pInfo, struct pid *pid, int arg) +{ + struct r3964_client_info *pClient; + struct r3964_client_info **ppClient; + struct r3964_message *pMsg; + + if ((arg & R3964_SIG_ALL) == 0) { + /* Remove client from client list */ + for (ppClient = &pInfo->firstClient; *ppClient; + ppClient = &(*ppClient)->next) { + pClient = *ppClient; + + if (pClient->pid == pid) { + TRACE_PS("removing client %d from client list", + pid_nr(pid)); + *ppClient = pClient->next; + while (pClient->msg_count) { + pMsg = remove_msg(pInfo, pClient); + if (pMsg) { + kfree(pMsg); + TRACE_M("enable_signals - msg " + "kfree %p", pMsg); + } + } + put_pid(pClient->pid); + kfree(pClient); + TRACE_M("enable_signals - kfree %p", pClient); + return 0; + } + } + return -EINVAL; + } else { + pClient = findClient(pInfo, pid); + if (pClient) { + /* update signal options */ + pClient->sig_flags = arg; + } else { + /* add client to client list */ + pClient = kmalloc(sizeof(struct r3964_client_info), + GFP_KERNEL); + TRACE_M("enable_signals - kmalloc %p", pClient); + if (pClient == NULL) + return -ENOMEM; + + TRACE_PS("add client %d to client list", pid_nr(pid)); + spin_lock_init(&pClient->lock); + pClient->sig_flags = arg; + pClient->pid = get_pid(pid); + pClient->next = pInfo->firstClient; + pClient->first_msg = NULL; + pClient->last_msg = NULL; + pClient->next_block_to_read = NULL; + pClient->msg_count = 0; + pInfo->firstClient = pClient; + } + } + + return 0; +} + +static int read_telegram(struct r3964_info *pInfo, struct pid *pid, + unsigned char __user * buf) +{ + struct r3964_client_info *pClient; + struct r3964_block_header *block; + + if (!buf) { + return -EINVAL; + } + + pClient = findClient(pInfo, pid); + if (pClient == NULL) { + return -EINVAL; + } + + block = pClient->next_block_to_read; + if (!block) { + return 0; + } else { + if (copy_to_user(buf, block->data, block->length)) + return -EFAULT; + + remove_client_block(pInfo, pClient); + return block->length; + } + + return -EINVAL; +} + +static void add_msg(struct r3964_client_info *pClient, int msg_id, int arg, + int error_code, struct r3964_block_header *pBlock) +{ + struct r3964_message *pMsg; + unsigned long flags; + + if (pClient->msg_count < R3964_MAX_MSG_COUNT - 1) { +queue_the_message: + + pMsg = kmalloc(sizeof(struct r3964_message), + error_code ? GFP_ATOMIC : GFP_KERNEL); + TRACE_M("add_msg - kmalloc %p", pMsg); + if (pMsg == NULL) { + return; + } + + spin_lock_irqsave(&pClient->lock, flags); + + pMsg->msg_id = msg_id; + pMsg->arg = arg; + pMsg->error_code = error_code; + pMsg->block = pBlock; + pMsg->next = NULL; + + if (pClient->last_msg == NULL) { + pClient->first_msg = pClient->last_msg = pMsg; + } else { + pClient->last_msg->next = pMsg; + pClient->last_msg = pMsg; + } + + pClient->msg_count++; + + if (pBlock != NULL) { + pBlock->locks++; + } + spin_unlock_irqrestore(&pClient->lock, flags); + } else { + if ((pClient->last_msg->msg_id == R3964_MSG_ACK) + && (pClient->last_msg->error_code == R3964_OVERFLOW)) { + pClient->last_msg->arg++; + TRACE_PE("add_msg - inc prev OVERFLOW-msg"); + } else { + msg_id = R3964_MSG_ACK; + arg = 0; + error_code = R3964_OVERFLOW; + pBlock = NULL; + TRACE_PE("add_msg - queue OVERFLOW-msg"); + goto queue_the_message; + } + } + /* Send SIGIO signal to client process: */ + if (pClient->sig_flags & R3964_USE_SIGIO) { + kill_pid(pClient->pid, SIGIO, 1); + } +} + +static struct r3964_message *remove_msg(struct r3964_info *pInfo, + struct r3964_client_info *pClient) +{ + struct r3964_message *pMsg = NULL; + unsigned long flags; + + if (pClient->first_msg) { + spin_lock_irqsave(&pClient->lock, flags); + + pMsg = pClient->first_msg; + pClient->first_msg = pMsg->next; + if (pClient->first_msg == NULL) { + pClient->last_msg = NULL; + } + + pClient->msg_count--; + if (pMsg->block) { + remove_client_block(pInfo, pClient); + pClient->next_block_to_read = pMsg->block; + } + spin_unlock_irqrestore(&pClient->lock, flags); + } + return pMsg; +} + +static void remove_client_block(struct r3964_info *pInfo, + struct r3964_client_info *pClient) +{ + struct r3964_block_header *block; + + TRACE_PS("remove_client_block PID %d", pid_nr(pClient->pid)); + + block = pClient->next_block_to_read; + if (block) { + block->locks--; + if (block->locks == 0) { + remove_from_rx_queue(pInfo, block); + } + } + pClient->next_block_to_read = NULL; +} + +/************************************************************* + * Line discipline routines + *************************************************************/ + +static int r3964_open(struct tty_struct *tty) +{ + struct r3964_info *pInfo; + + TRACE_L("open"); + TRACE_L("tty=%p, PID=%d, disc_data=%p", + tty, current->pid, tty->disc_data); + + pInfo = kmalloc(sizeof(struct r3964_info), GFP_KERNEL); + TRACE_M("r3964_open - info kmalloc %p", pInfo); + + if (!pInfo) { + printk(KERN_ERR "r3964: failed to alloc info structure\n"); + return -ENOMEM; + } + + pInfo->rx_buf = kmalloc(RX_BUF_SIZE, GFP_KERNEL); + TRACE_M("r3964_open - rx_buf kmalloc %p", pInfo->rx_buf); + + if (!pInfo->rx_buf) { + printk(KERN_ERR "r3964: failed to alloc receive buffer\n"); + kfree(pInfo); + TRACE_M("r3964_open - info kfree %p", pInfo); + return -ENOMEM; + } + + pInfo->tx_buf = kmalloc(TX_BUF_SIZE, GFP_KERNEL); + TRACE_M("r3964_open - tx_buf kmalloc %p", pInfo->tx_buf); + + if (!pInfo->tx_buf) { + printk(KERN_ERR "r3964: failed to alloc transmit buffer\n"); + kfree(pInfo->rx_buf); + TRACE_M("r3964_open - rx_buf kfree %p", pInfo->rx_buf); + kfree(pInfo); + TRACE_M("r3964_open - info kfree %p", pInfo); + return -ENOMEM; + } + + spin_lock_init(&pInfo->lock); + mutex_init(&pInfo->read_lock); + pInfo->tty = tty; + pInfo->priority = R3964_MASTER; + pInfo->rx_first = pInfo->rx_last = NULL; + pInfo->tx_first = pInfo->tx_last = NULL; + pInfo->rx_position = 0; + pInfo->tx_position = 0; + pInfo->last_rx = 0; + pInfo->blocks_in_rx_queue = 0; + pInfo->firstClient = NULL; + pInfo->state = R3964_IDLE; + pInfo->flags = R3964_DEBUG; + pInfo->nRetry = 0; + + tty->disc_data = pInfo; + tty->receive_room = 65536; + + timer_setup(&pInfo->tmr, on_timeout, 0); + + return 0; +} + +static void r3964_close(struct tty_struct *tty) +{ + struct r3964_info *pInfo = tty->disc_data; + struct r3964_client_info *pClient, *pNext; + struct r3964_message *pMsg; + struct r3964_block_header *pHeader, *pNextHeader; + unsigned long flags; + + TRACE_L("close"); + + /* + * Make sure that our task queue isn't activated. If it + * is, take it out of the linked list. + */ + del_timer_sync(&pInfo->tmr); + + /* Remove client-structs and message queues: */ + pClient = pInfo->firstClient; + while (pClient) { + pNext = pClient->next; + while (pClient->msg_count) { + pMsg = remove_msg(pInfo, pClient); + if (pMsg) { + kfree(pMsg); + TRACE_M("r3964_close - msg kfree %p", pMsg); + } + } + put_pid(pClient->pid); + kfree(pClient); + TRACE_M("r3964_close - client kfree %p", pClient); + pClient = pNext; + } + /* Remove jobs from tx_queue: */ + spin_lock_irqsave(&pInfo->lock, flags); + pHeader = pInfo->tx_first; + pInfo->tx_first = pInfo->tx_last = NULL; + spin_unlock_irqrestore(&pInfo->lock, flags); + + while (pHeader) { + pNextHeader = pHeader->next; + kfree(pHeader); + pHeader = pNextHeader; + } + + /* Free buffers: */ + kfree(pInfo->rx_buf); + TRACE_M("r3964_close - rx_buf kfree %p", pInfo->rx_buf); + kfree(pInfo->tx_buf); + TRACE_M("r3964_close - tx_buf kfree %p", pInfo->tx_buf); + kfree(pInfo); + TRACE_M("r3964_close - info kfree %p", pInfo); +} + +static ssize_t r3964_read(struct tty_struct *tty, struct file *file, + unsigned char *kbuf, size_t nr, + void **cookie, unsigned long offset) +{ + struct r3964_info *pInfo = tty->disc_data; + struct r3964_client_info *pClient; + struct r3964_message *pMsg; + struct r3964_client_message theMsg; + int ret; + + TRACE_L("read()"); + + /* + * Internal serialization of reads. + */ + if (file->f_flags & O_NONBLOCK) { + if (!mutex_trylock(&pInfo->read_lock)) + return -EAGAIN; + } else { + if (mutex_lock_interruptible(&pInfo->read_lock)) + return -ERESTARTSYS; + } + + pClient = findClient(pInfo, task_pid(current)); + if (pClient) { + pMsg = remove_msg(pInfo, pClient); + if (pMsg == NULL) { + /* no messages available. */ + if (tty_io_nonblock(tty, file)) { + ret = -EAGAIN; + goto unlock; + } + /* block until there is a message: */ + wait_event_interruptible(tty->read_wait, + (pMsg = remove_msg(pInfo, pClient))); + } + + /* If we still haven't got a message, we must have been signalled */ + + if (!pMsg) { + ret = -EINTR; + goto unlock; + } + + /* deliver msg to client process: */ + theMsg.msg_id = pMsg->msg_id; + theMsg.arg = pMsg->arg; + theMsg.error_code = pMsg->error_code; + ret = sizeof(struct r3964_client_message); + + kfree(pMsg); + TRACE_M("r3964_read - msg kfree %p", pMsg); + + memcpy(kbuf, &theMsg, ret); + + TRACE_PS("read - return %d", ret); + goto unlock; + } + ret = -EPERM; +unlock: + mutex_unlock(&pInfo->read_lock); + return ret; +} + +static ssize_t r3964_write(struct tty_struct *tty, struct file *file, + const unsigned char *data, size_t count) +{ + struct r3964_info *pInfo = tty->disc_data; + struct r3964_block_header *pHeader; + struct r3964_client_info *pClient; + unsigned char *new_data; + + TRACE_L("write request, %d characters", count); +/* + * Verify the pointers + */ + + if (!pInfo) + return -EIO; + +/* + * Ensure that the caller does not wish to send too much. + */ + if (count > R3964_MTU) { + if (pInfo->flags & R3964_DEBUG) { + TRACE_L(KERN_WARNING "r3964_write: truncating user " + "packet from %u to mtu %d", count, R3964_MTU); + } + count = R3964_MTU; + } +/* + * Allocate a buffer for the data and copy it from the buffer with header prepended + */ + new_data = kmalloc(count + sizeof(struct r3964_block_header), + GFP_KERNEL); + TRACE_M("r3964_write - kmalloc %p", new_data); + if (new_data == NULL) { + if (pInfo->flags & R3964_DEBUG) { + printk(KERN_ERR "r3964_write: no memory\n"); + } + return -ENOSPC; + } + + pHeader = (struct r3964_block_header *)new_data; + pHeader->data = new_data + sizeof(struct r3964_block_header); + pHeader->length = count; + pHeader->locks = 0; + pHeader->owner = NULL; + + pClient = findClient(pInfo, task_pid(current)); + if (pClient) { + pHeader->owner = pClient; + } + + memcpy(pHeader->data, data, count); /* We already verified this */ + + if (pInfo->flags & R3964_DEBUG) { + dump_block(pHeader->data, count); + } + +/* + * Add buffer to transmit-queue: + */ + add_tx_queue(pInfo, pHeader); + trigger_transmit(pInfo); + + return 0; +} + +static int r3964_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct r3964_info *pInfo = tty->disc_data; + if (pInfo == NULL) + return -EINVAL; + switch (cmd) { + case R3964_ENABLE_SIGNALS: + return enable_signals(pInfo, task_pid(current), arg); + case R3964_SETPRIORITY: + if (arg < R3964_MASTER || arg > R3964_SLAVE) + return -EINVAL; + pInfo->priority = arg & 0xff; + return 0; + case R3964_USE_BCC: + if (arg) + pInfo->flags |= R3964_BCC; + else + pInfo->flags &= ~R3964_BCC; + return 0; + case R3964_READ_TELEGRAM: + return read_telegram(pInfo, task_pid(current), + (unsigned char __user *)arg); + default: + return -ENOIOCTLCMD; + } +} + +#ifdef CONFIG_COMPAT +static int r3964_compat_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) +{ + switch (cmd) { + case R3964_ENABLE_SIGNALS: + case R3964_SETPRIORITY: + case R3964_USE_BCC: + return r3964_ioctl(tty, file, cmd, arg); + default: + return -ENOIOCTLCMD; + } +} +#endif + +static void r3964_set_termios(struct tty_struct *tty, struct ktermios *old) +{ + TRACE_L("set_termios"); +} + +/* Called without the kernel lock held - fine */ +static __poll_t r3964_poll(struct tty_struct *tty, struct file *file, + struct poll_table_struct *wait) +{ + struct r3964_info *pInfo = tty->disc_data; + struct r3964_client_info *pClient; + struct r3964_message *pMsg = NULL; + unsigned long flags; + __poll_t result = EPOLLOUT; + + TRACE_L("POLL"); + + pClient = findClient(pInfo, task_pid(current)); + if (pClient) { + poll_wait(file, &tty->read_wait, wait); + spin_lock_irqsave(&pInfo->lock, flags); + pMsg = pClient->first_msg; + spin_unlock_irqrestore(&pInfo->lock, flags); + if (pMsg) + result |= EPOLLIN | EPOLLRDNORM; + } else { + result = -EINVAL; + } + return result; +} + +static void r3964_receive_buf(struct tty_struct *tty, const unsigned char *cp, + char *fp, int count) +{ + struct r3964_info *pInfo = tty->disc_data; + const unsigned char *p; + char *f, flags = TTY_NORMAL; + int i; + + for (i = count, p = cp, f = fp; i; i--, p++) { + if (f) + flags = *f++; + if (flags == TTY_NORMAL) { + receive_char(pInfo, *p); + } else { + receive_error(pInfo, flags); + } + + } +} + +MODULE_LICENSE("GPL"); +MODULE_ALIAS_LDISC(N_R3964); diff --git a/drivers/tty/n_tracerouter.c b/drivers/tty/n_tracerouter.c new file mode 100644 index 000000000..3490ed51b --- /dev/null +++ b/drivers/tty/n_tracerouter.c @@ -0,0 +1,235 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * n_tracerouter.c - Trace data router through tty space + * + * Copyright (C) Intel 2011 + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This trace router uses the Linux line discipline framework to route + * trace data coming from a HW Modem to a PTI (Parallel Trace Module) port. + * The solution is not specific to a HW modem and this line disciple can + * be used to route any stream of data in kernel space. + * This is part of a solution for the P1149.7, compact JTAG, standard. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "n_tracesink.h" + +/* + * Other ldisc drivers use 65536 which basically means, + * 'I can always accept 64k' and flow control is off. + * This number is deemed appropriate for this driver. + */ +#define RECEIVE_ROOM 65536 +#define DRIVERNAME "n_tracerouter" + +/* + * struct to hold private configuration data for this ldisc. + * opencalled is used to hold if this ldisc has been opened. + * kref_tty holds the tty reference the ldisc sits on top of. + */ +struct tracerouter_data { + u8 opencalled; + struct tty_struct *kref_tty; +}; +static struct tracerouter_data *tr_data; + +/* lock for when tty reference is being used */ +static DEFINE_MUTEX(routelock); + +/** + * n_tracerouter_open() - Called when a tty is opened by a SW entity. + * @tty: terminal device to the ldisc. + * + * Return: + * 0 for success. + * + * Caveats: This should only be opened one time per SW entity. + */ +static int n_tracerouter_open(struct tty_struct *tty) +{ + int retval = -EEXIST; + + mutex_lock(&routelock); + if (tr_data->opencalled == 0) { + + tr_data->kref_tty = tty_kref_get(tty); + if (tr_data->kref_tty == NULL) { + retval = -EFAULT; + } else { + tr_data->opencalled = 1; + tty->disc_data = tr_data; + tty->receive_room = RECEIVE_ROOM; + tty_driver_flush_buffer(tty); + retval = 0; + } + } + mutex_unlock(&routelock); + return retval; +} + +/** + * n_tracerouter_close() - close connection + * @tty: terminal device to the ldisc. + * + * Called when a software entity wants to close a connection. + */ +static void n_tracerouter_close(struct tty_struct *tty) +{ + struct tracerouter_data *tptr = tty->disc_data; + + mutex_lock(&routelock); + WARN_ON(tptr->kref_tty != tr_data->kref_tty); + tty_driver_flush_buffer(tty); + tty_kref_put(tr_data->kref_tty); + tr_data->kref_tty = NULL; + tr_data->opencalled = 0; + tty->disc_data = NULL; + mutex_unlock(&routelock); +} + +/** + * n_tracerouter_read() - read request from user space + * @tty: terminal device passed into the ldisc. + * @file: pointer to open file object. + * @buf: pointer to the data buffer that gets eventually returned. + * @nr: number of bytes of the data buffer that is returned. + * + * function that allows read() functionality in userspace. By default if this + * is not implemented it returns -EIO. This module is functioning like a + * router via n_tracerouter_receivebuf(), and there is no real requirement + * to implement this function. However, an error return value other than + * -EIO should be used just to show that there was an intent not to have + * this function implemented. Return value based on read() man pages. + * + * Return: + * -EINVAL + */ +static ssize_t n_tracerouter_read(struct tty_struct *tty, struct file *file, + unsigned char *buf, size_t nr, + void **cookie, unsigned long offset) +{ + return -EINVAL; +} + +/** + * n_tracerouter_write() - Function that allows write() in userspace. + * @tty: terminal device passed into the ldisc. + * @file: pointer to open file object. + * @buf: pointer to the data buffer that gets eventually returned. + * @nr: number of bytes of the data buffer that is returned. + * + * By default if this is not implemented, it returns -EIO. + * This should not be implemented, ever, because + * 1. this driver is functioning like a router via + * n_tracerouter_receivebuf() + * 2. No writes to HW will ever go through this line discpline driver. + * However, an error return value other than -EIO should be used + * just to show that there was an intent not to have this function + * implemented. Return value based on write() man pages. + * + * Return: + * -EINVAL + */ +static ssize_t n_tracerouter_write(struct tty_struct *tty, struct file *file, + const unsigned char *buf, size_t nr) { + return -EINVAL; +} + +/** + * n_tracerouter_receivebuf() - Routing function for driver. + * @tty: terminal device passed into the ldisc. It's assumed + * tty will never be NULL. + * @cp: buffer, block of characters to be eventually read by + * someone, somewhere (user read() call or some kernel function). + * @fp: flag buffer. + * @count: number of characters (aka, bytes) in cp. + * + * This function takes the input buffer, cp, and passes it to + * an external API function for processing. + */ +static void n_tracerouter_receivebuf(struct tty_struct *tty, + const unsigned char *cp, + char *fp, int count) +{ + mutex_lock(&routelock); + n_tracesink_datadrain((u8 *) cp, count); + mutex_unlock(&routelock); +} + +/* + * Flush buffer is not impelemented as the ldisc has no internal buffering + * so the tty_driver_flush_buffer() is sufficient for this driver's needs. + */ + +static struct tty_ldisc_ops tty_ptirouter_ldisc = { + .owner = THIS_MODULE, + .magic = TTY_LDISC_MAGIC, + .name = DRIVERNAME, + .open = n_tracerouter_open, + .close = n_tracerouter_close, + .read = n_tracerouter_read, + .write = n_tracerouter_write, + .receive_buf = n_tracerouter_receivebuf +}; + +/** + * n_tracerouter_init - module initialisation + * + * Registers this module as a line discipline driver. + * + * Return: + * 0 for success, any other value error. + */ +static int __init n_tracerouter_init(void) +{ + int retval; + + tr_data = kzalloc(sizeof(struct tracerouter_data), GFP_KERNEL); + if (tr_data == NULL) + return -ENOMEM; + + + /* Note N_TRACEROUTER is defined in linux/tty.h */ + retval = tty_register_ldisc(N_TRACEROUTER, &tty_ptirouter_ldisc); + if (retval < 0) { + pr_err("%s: Registration failed: %d\n", __func__, retval); + kfree(tr_data); + } + return retval; +} + +/** + * n_tracerouter_exit - module unload + * + * Removes this module as a line discipline driver. + */ +static void __exit n_tracerouter_exit(void) +{ + int retval = tty_unregister_ldisc(N_TRACEROUTER); + + if (retval < 0) + pr_err("%s: Unregistration failed: %d\n", __func__, retval); + else + kfree(tr_data); +} + +module_init(n_tracerouter_init); +module_exit(n_tracerouter_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Jay Freyensee"); +MODULE_ALIAS_LDISC(N_TRACEROUTER); +MODULE_DESCRIPTION("Trace router ldisc driver"); diff --git a/drivers/tty/n_tracesink.c b/drivers/tty/n_tracesink.c new file mode 100644 index 000000000..1d9931041 --- /dev/null +++ b/drivers/tty/n_tracesink.c @@ -0,0 +1,230 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * n_tracesink.c - Trace data router and sink path through tty space. + * + * Copyright (C) Intel 2011 + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * The trace sink uses the Linux line discipline framework to receive + * trace data coming from the PTI source line discipline driver + * to a user-desired tty port, like USB. + * This is to provide a way to extract modem trace data on + * devices that do not have a PTI HW module, or just need modem + * trace data to come out of a different HW output port. + * This is part of a solution for the P1149.7, compact JTAG, standard. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "n_tracesink.h" + +/* + * Other ldisc drivers use 65536 which basically means, + * 'I can always accept 64k' and flow control is off. + * This number is deemed appropriate for this driver. + */ +#define RECEIVE_ROOM 65536 +#define DRIVERNAME "n_tracesink" + +/* + * there is a quirk with this ldisc is he can write data + * to a tty from anyone calling his kernel API, which + * meets customer requirements in the drivers/misc/pti.c + * project. So he needs to know when he can and cannot write when + * the API is called. In theory, the API can be called + * after an init() but before a successful open() which + * would crash the system if tty is not checked. + */ +static struct tty_struct *this_tty; +static DEFINE_MUTEX(writelock); + +/** + * n_tracesink_open() - Called when a tty is opened by a SW entity. + * @tty: terminal device to the ldisc. + * + * Return: + * 0 for success, + * -EFAULT = couldn't get a tty kref n_tracesink will sit + * on top of + * -EEXIST = open() called successfully once and it cannot + * be called again. + * + * Caveats: open() should only be successful the first time a + * SW entity calls it. + */ +static int n_tracesink_open(struct tty_struct *tty) +{ + int retval = -EEXIST; + + mutex_lock(&writelock); + if (this_tty == NULL) { + this_tty = tty_kref_get(tty); + if (this_tty == NULL) { + retval = -EFAULT; + } else { + tty->disc_data = this_tty; + tty_driver_flush_buffer(tty); + retval = 0; + } + } + mutex_unlock(&writelock); + + return retval; +} + +/** + * n_tracesink_close() - close connection + * @tty: terminal device to the ldisc. + * + * Called when a software entity wants to close a connection. + */ +static void n_tracesink_close(struct tty_struct *tty) +{ + mutex_lock(&writelock); + tty_driver_flush_buffer(tty); + tty_kref_put(this_tty); + this_tty = NULL; + tty->disc_data = NULL; + mutex_unlock(&writelock); +} + +/** + * n_tracesink_read() - read request from user space + * @tty: terminal device passed into the ldisc. + * @file: pointer to open file object. + * @buf: pointer to the data buffer that gets eventually returned. + * @nr: number of bytes of the data buffer that is returned. + * + * function that allows read() functionality in userspace. By default if this + * is not implemented it returns -EIO. This module is functioning like a + * router via n_tracesink_receivebuf(), and there is no real requirement + * to implement this function. However, an error return value other than + * -EIO should be used just to show that there was an intent not to have + * this function implemented. Return value based on read() man pages. + * + * Return: + * -EINVAL + */ +static ssize_t n_tracesink_read(struct tty_struct *tty, struct file *file, + unsigned char *buf, size_t nr, + void **cookie, unsigned long offset) +{ + return -EINVAL; +} + +/** + * n_tracesink_write() - Function that allows write() in userspace. + * @tty: terminal device passed into the ldisc. + * @file: pointer to open file object. + * @buf: pointer to the data buffer that gets eventually returned. + * @nr: number of bytes of the data buffer that is returned. + * + * By default if this is not implemented, it returns -EIO. + * This should not be implemented, ever, because + * 1. this driver is functioning like a router via + * n_tracesink_receivebuf() + * 2. No writes to HW will ever go through this line discpline driver. + * However, an error return value other than -EIO should be used + * just to show that there was an intent not to have this function + * implemented. Return value based on write() man pages. + * + * Return: + * -EINVAL + */ +static ssize_t n_tracesink_write(struct tty_struct *tty, struct file *file, + const unsigned char *buf, size_t nr) { + return -EINVAL; +} + +/** + * n_tracesink_datadrain() - Kernel API function used to route + * trace debugging data to user-defined + * port like USB. + * + * @buf: Trace debuging data buffer to write to tty target + * port. Null value will return with no write occurring. + * @count: Size of buf. Value of 0 or a negative number will + * return with no write occuring. + * + * Caveat: If this line discipline does not set the tty it sits + * on top of via an open() call, this API function will not + * call the tty's write() call because it will have no pointer + * to call the write(). + */ +void n_tracesink_datadrain(u8 *buf, int count) +{ + mutex_lock(&writelock); + + if ((buf != NULL) && (count > 0) && (this_tty != NULL)) + this_tty->ops->write(this_tty, buf, count); + + mutex_unlock(&writelock); +} +EXPORT_SYMBOL_GPL(n_tracesink_datadrain); + +/* + * Flush buffer is not impelemented as the ldisc has no internal buffering + * so the tty_driver_flush_buffer() is sufficient for this driver's needs. + */ + +/* + * tty_ldisc function operations for this driver. + */ +static struct tty_ldisc_ops tty_n_tracesink = { + .owner = THIS_MODULE, + .magic = TTY_LDISC_MAGIC, + .name = DRIVERNAME, + .open = n_tracesink_open, + .close = n_tracesink_close, + .read = n_tracesink_read, + .write = n_tracesink_write +}; + +/** + * n_tracesink_init- module initialisation + * + * Registers this module as a line discipline driver. + * + * Return: + * 0 for success, any other value error. + */ +static int __init n_tracesink_init(void) +{ + /* Note N_TRACESINK is defined in linux/tty.h */ + int retval = tty_register_ldisc(N_TRACESINK, &tty_n_tracesink); + + if (retval < 0) + pr_err("%s: Registration failed: %d\n", __func__, retval); + + return retval; +} + +/** + * n_tracesink_exit - module unload + * + * Removes this module as a line discipline driver. + */ +static void __exit n_tracesink_exit(void) +{ + int retval = tty_unregister_ldisc(N_TRACESINK); + + if (retval < 0) + pr_err("%s: Unregistration failed: %d\n", __func__, retval); +} + +module_init(n_tracesink_init); +module_exit(n_tracesink_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Jay Freyensee"); +MODULE_ALIAS_LDISC(N_TRACESINK); +MODULE_DESCRIPTION("Trace sink ldisc driver"); diff --git a/drivers/tty/n_tracesink.h b/drivers/tty/n_tracesink.h new file mode 100644 index 000000000..7031d515a --- /dev/null +++ b/drivers/tty/n_tracesink.h @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * n_tracesink.h - Kernel driver API to route trace data in kernel space. + * + * Copyright (C) Intel 2011 + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * The PTI (Parallel Trace Interface) driver directs trace data routed from + * various parts in the system out through the Intel Penwell PTI port and + * out of the mobile device for analysis with a debugging tool + * (Lauterbach, Fido). This is part of a solution for the MIPI P1149.7, + * compact JTAG, standard. + * + * This header file is used by n_tracerouter to be able to send the + * data of it's tty port to the tty port this module sits. This + * mechanism can also be used independent of the PTI module. + * + */ + +#ifndef N_TRACESINK_H_ +#define N_TRACESINK_H_ + +void n_tracesink_datadrain(u8 *buf, int count); + +#endif diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c new file mode 100644 index 000000000..8e7931d93 --- /dev/null +++ b/drivers/tty/n_tty.c @@ -0,0 +1,2555 @@ +// SPDX-License-Identifier: GPL-1.0+ +/* + * n_tty.c --- implements the N_TTY line discipline. + * + * This code used to be in tty_io.c, but things are getting hairy + * enough that it made sense to split things off. (The N_TTY + * processing has changed so much that it's hardly recognizable, + * anyway...) + * + * Note that the open routine for N_TTY is guaranteed never to return + * an error. This is because Linux will fall back to setting a line + * to N_TTY if it can not switch to any other line discipline. + * + * Written by Theodore Ts'o, Copyright 1994. + * + * This file also contains code originally written by Linus Torvalds, + * Copyright 1991, 1992, 1993, and by Julian Cowley, Copyright 1994. + * + * Reduced memory usage for older ARM systems - Russell King. + * + * 2000/01/20 Fixed SMP locking on put_tty_queue using bits of + * the patch by Andrew J. Kroll + * who actually finally proved there really was a race. + * + * 2002/03/18 Implemented n_tty_wakeup to send SIGIO POLL_OUTs to + * waiting writing processes-Sapan Bhatia . + * Also fixed a bug in BLOCKING mode where n_tty_write returns + * EAGAIN + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "tty.h" + +/* + * Until this number of characters is queued in the xmit buffer, select will + * return "we have room for writes". + */ +#define WAKEUP_CHARS 256 + +/* + * This defines the low- and high-watermarks for throttling and + * unthrottling the TTY driver. These watermarks are used for + * controlling the space in the read buffer. + */ +#define TTY_THRESHOLD_THROTTLE 128 /* now based on remaining room */ +#define TTY_THRESHOLD_UNTHROTTLE 128 + +/* + * Special byte codes used in the echo buffer to represent operations + * or special handling of characters. Bytes in the echo buffer that + * are not part of such special blocks are treated as normal character + * codes. + */ +#define ECHO_OP_START 0xff +#define ECHO_OP_MOVE_BACK_COL 0x80 +#define ECHO_OP_SET_CANON_COL 0x81 +#define ECHO_OP_ERASE_TAB 0x82 + +#define ECHO_COMMIT_WATERMARK 256 +#define ECHO_BLOCK 256 +#define ECHO_DISCARD_WATERMARK N_TTY_BUF_SIZE - (ECHO_BLOCK + 32) + + +#undef N_TTY_TRACE +#ifdef N_TTY_TRACE +# define n_tty_trace(f, args...) trace_printk(f, ##args) +#else +# define n_tty_trace(f, args...) no_printk(f, ##args) +#endif + +struct n_tty_data { + /* producer-published */ + size_t read_head; + size_t commit_head; + size_t canon_head; + size_t echo_head; + size_t echo_commit; + size_t echo_mark; + DECLARE_BITMAP(char_map, 256); + + /* private to n_tty_receive_overrun (single-threaded) */ + unsigned long overrun_time; + int num_overrun; + + /* non-atomic */ + bool no_room; + + /* must hold exclusive termios_rwsem to reset these */ + unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1; + unsigned char push:1; + + /* shared by producer and consumer */ + char read_buf[N_TTY_BUF_SIZE]; + DECLARE_BITMAP(read_flags, N_TTY_BUF_SIZE); + unsigned char echo_buf[N_TTY_BUF_SIZE]; + + /* consumer-published */ + size_t read_tail; + size_t line_start; + + /* protected by output lock */ + unsigned int column; + unsigned int canon_column; + size_t echo_tail; + + struct mutex atomic_read_lock; + struct mutex output_lock; +}; + +#define MASK(x) ((x) & (N_TTY_BUF_SIZE - 1)) + +static inline size_t read_cnt(struct n_tty_data *ldata) +{ + return ldata->read_head - ldata->read_tail; +} + +static inline unsigned char read_buf(struct n_tty_data *ldata, size_t i) +{ + return ldata->read_buf[i & (N_TTY_BUF_SIZE - 1)]; +} + +static inline unsigned char *read_buf_addr(struct n_tty_data *ldata, size_t i) +{ + return &ldata->read_buf[i & (N_TTY_BUF_SIZE - 1)]; +} + +static inline unsigned char echo_buf(struct n_tty_data *ldata, size_t i) +{ + smp_rmb(); /* Matches smp_wmb() in add_echo_byte(). */ + return ldata->echo_buf[i & (N_TTY_BUF_SIZE - 1)]; +} + +static inline unsigned char *echo_buf_addr(struct n_tty_data *ldata, size_t i) +{ + return &ldata->echo_buf[i & (N_TTY_BUF_SIZE - 1)]; +} + +/* If we are not echoing the data, perhaps this is a secret so erase it */ +static void zero_buffer(struct tty_struct *tty, u8 *buffer, int size) +{ + bool icanon = !!L_ICANON(tty); + bool no_echo = !L_ECHO(tty); + + if (icanon && no_echo) + memset(buffer, 0x00, size); +} + +static void tty_copy(struct tty_struct *tty, void *to, size_t tail, size_t n) +{ + struct n_tty_data *ldata = tty->disc_data; + size_t size = N_TTY_BUF_SIZE - tail; + void *from = read_buf_addr(ldata, tail); + + if (n > size) { + tty_audit_add_data(tty, from, size); + memcpy(to, from, size); + zero_buffer(tty, from, size); + to += size; + n -= size; + from = ldata->read_buf; + } + + tty_audit_add_data(tty, from, n); + memcpy(to, from, n); + zero_buffer(tty, from, n); +} + +/** + * n_tty_kick_worker - start input worker (if required) + * @tty: terminal + * + * Re-schedules the flip buffer work if it may have stopped + * + * Caller holds exclusive termios_rwsem + * or + * n_tty_read()/consumer path: + * holds non-exclusive termios_rwsem + */ + +static void n_tty_kick_worker(struct tty_struct *tty) +{ + struct n_tty_data *ldata = tty->disc_data; + + /* Did the input worker stop? Restart it */ + if (unlikely(ldata->no_room)) { + ldata->no_room = 0; + + WARN_RATELIMIT(tty->port->itty == NULL, + "scheduling with invalid itty\n"); + /* see if ldisc has been killed - if so, this means that + * even though the ldisc has been halted and ->buf.work + * cancelled, ->buf.work is about to be rescheduled + */ + WARN_RATELIMIT(test_bit(TTY_LDISC_HALTED, &tty->flags), + "scheduling buffer work for halted ldisc\n"); + tty_buffer_restart_work(tty->port); + } +} + +static ssize_t chars_in_buffer(struct tty_struct *tty) +{ + struct n_tty_data *ldata = tty->disc_data; + ssize_t n = 0; + + if (!ldata->icanon) + n = ldata->commit_head - ldata->read_tail; + else + n = ldata->canon_head - ldata->read_tail; + return n; +} + +/** + * n_tty_write_wakeup - asynchronous I/O notifier + * @tty: tty device + * + * Required for the ptys, serial driver etc. since processes + * that attach themselves to the master and rely on ASYNC + * IO must be woken up + */ + +static void n_tty_write_wakeup(struct tty_struct *tty) +{ + clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); + kill_fasync(&tty->fasync, SIGIO, POLL_OUT); +} + +static void n_tty_check_throttle(struct tty_struct *tty) +{ + struct n_tty_data *ldata = tty->disc_data; + + /* + * Check the remaining room for the input canonicalization + * mode. We don't want to throttle the driver if we're in + * canonical mode and don't have a newline yet! + */ + if (ldata->icanon && ldata->canon_head == ldata->read_tail) + return; + + while (1) { + int throttled; + tty_set_flow_change(tty, TTY_THROTTLE_SAFE); + if (N_TTY_BUF_SIZE - read_cnt(ldata) >= TTY_THRESHOLD_THROTTLE) + break; + throttled = tty_throttle_safe(tty); + if (!throttled) + break; + } + __tty_set_flow_change(tty, 0); +} + +static void n_tty_check_unthrottle(struct tty_struct *tty) +{ + if (tty->driver->type == TTY_DRIVER_TYPE_PTY) { + if (chars_in_buffer(tty) > TTY_THRESHOLD_UNTHROTTLE) + return; + n_tty_kick_worker(tty); + tty_wakeup(tty->link); + return; + } + + /* If there is enough space in the read buffer now, let the + * low-level driver know. We use chars_in_buffer() to + * check the buffer, as it now knows about canonical mode. + * Otherwise, if the driver is throttled and the line is + * longer than TTY_THRESHOLD_UNTHROTTLE in canonical mode, + * we won't get any more characters. + */ + + while (1) { + int unthrottled; + tty_set_flow_change(tty, TTY_UNTHROTTLE_SAFE); + if (chars_in_buffer(tty) > TTY_THRESHOLD_UNTHROTTLE) + break; + n_tty_kick_worker(tty); + unthrottled = tty_unthrottle_safe(tty); + if (!unthrottled) + break; + } + __tty_set_flow_change(tty, 0); +} + +/** + * put_tty_queue - add character to tty + * @c: character + * @ldata: n_tty data + * + * Add a character to the tty read_buf queue. + * + * n_tty_receive_buf()/producer path: + * caller holds non-exclusive termios_rwsem + */ + +static inline void put_tty_queue(unsigned char c, struct n_tty_data *ldata) +{ + *read_buf_addr(ldata, ldata->read_head) = c; + ldata->read_head++; +} + +/** + * reset_buffer_flags - reset buffer state + * @ldata: line disc data to reset + * + * Reset the read buffer counters and clear the flags. + * Called from n_tty_open() and n_tty_flush_buffer(). + * + * Locking: caller holds exclusive termios_rwsem + * (or locking is not required) + */ + +static void reset_buffer_flags(struct n_tty_data *ldata) +{ + ldata->read_head = ldata->canon_head = ldata->read_tail = 0; + ldata->commit_head = 0; + ldata->line_start = 0; + + ldata->erasing = 0; + bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE); + ldata->push = 0; +} + +static void n_tty_packet_mode_flush(struct tty_struct *tty) +{ + unsigned long flags; + + if (tty->link->packet) { + spin_lock_irqsave(&tty->ctrl_lock, flags); + tty->ctrl_status |= TIOCPKT_FLUSHREAD; + spin_unlock_irqrestore(&tty->ctrl_lock, flags); + wake_up_interruptible(&tty->link->read_wait); + } +} + +/** + * n_tty_flush_buffer - clean input queue + * @tty: terminal device + * + * Flush the input buffer. Called when the tty layer wants the + * buffer flushed (eg at hangup) or when the N_TTY line discipline + * internally has to clean the pending queue (for example some signals). + * + * Holds termios_rwsem to exclude producer/consumer while + * buffer indices are reset. + * + * Locking: ctrl_lock, exclusive termios_rwsem + */ + +static void n_tty_flush_buffer(struct tty_struct *tty) +{ + down_write(&tty->termios_rwsem); + reset_buffer_flags(tty->disc_data); + n_tty_kick_worker(tty); + + if (tty->link) + n_tty_packet_mode_flush(tty); + up_write(&tty->termios_rwsem); +} + +/** + * is_utf8_continuation - utf8 multibyte check + * @c: byte to check + * + * Returns true if the utf8 character 'c' is a multibyte continuation + * character. We use this to correctly compute the on screen size + * of the character when printing + */ + +static inline int is_utf8_continuation(unsigned char c) +{ + return (c & 0xc0) == 0x80; +} + +/** + * is_continuation - multibyte check + * @c: byte to check + * + * Returns true if the utf8 character 'c' is a multibyte continuation + * character and the terminal is in unicode mode. + */ + +static inline int is_continuation(unsigned char c, struct tty_struct *tty) +{ + return I_IUTF8(tty) && is_utf8_continuation(c); +} + +/** + * do_output_char - output one character + * @c: character (or partial unicode symbol) + * @tty: terminal device + * @space: space available in tty driver write buffer + * + * This is a helper function that handles one output character + * (including special characters like TAB, CR, LF, etc.), + * doing OPOST processing and putting the results in the + * tty driver's write buffer. + * + * Note that Linux currently ignores TABDLY, CRDLY, VTDLY, FFDLY + * and NLDLY. They simply aren't relevant in the world today. + * If you ever need them, add them here. + * + * Returns the number of bytes of buffer space used or -1 if + * no space left. + * + * Locking: should be called under the output_lock to protect + * the column state and space left in the buffer + */ + +static int do_output_char(unsigned char c, struct tty_struct *tty, int space) +{ + struct n_tty_data *ldata = tty->disc_data; + int spaces; + + if (!space) + return -1; + + switch (c) { + case '\n': + if (O_ONLRET(tty)) + ldata->column = 0; + if (O_ONLCR(tty)) { + if (space < 2) + return -1; + ldata->canon_column = ldata->column = 0; + tty->ops->write(tty, "\r\n", 2); + return 2; + } + ldata->canon_column = ldata->column; + break; + case '\r': + if (O_ONOCR(tty) && ldata->column == 0) + return 0; + if (O_OCRNL(tty)) { + c = '\n'; + if (O_ONLRET(tty)) + ldata->canon_column = ldata->column = 0; + break; + } + ldata->canon_column = ldata->column = 0; + break; + case '\t': + spaces = 8 - (ldata->column & 7); + if (O_TABDLY(tty) == XTABS) { + if (space < spaces) + return -1; + ldata->column += spaces; + tty->ops->write(tty, " ", spaces); + return spaces; + } + ldata->column += spaces; + break; + case '\b': + if (ldata->column > 0) + ldata->column--; + break; + default: + if (!iscntrl(c)) { + if (O_OLCUC(tty)) + c = toupper(c); + if (!is_continuation(c, tty)) + ldata->column++; + } + break; + } + + tty_put_char(tty, c); + return 1; +} + +/** + * process_output - output post processor + * @c: character (or partial unicode symbol) + * @tty: terminal device + * + * Output one character with OPOST processing. + * Returns -1 when the output device is full and the character + * must be retried. + * + * Locking: output_lock to protect column state and space left + * (also, this is called from n_tty_write under the + * tty layer write lock) + */ + +static int process_output(unsigned char c, struct tty_struct *tty) +{ + struct n_tty_data *ldata = tty->disc_data; + int space, retval; + + mutex_lock(&ldata->output_lock); + + space = tty_write_room(tty); + retval = do_output_char(c, tty, space); + + mutex_unlock(&ldata->output_lock); + if (retval < 0) + return -1; + else + return 0; +} + +/** + * process_output_block - block post processor + * @tty: terminal device + * @buf: character buffer + * @nr: number of bytes to output + * + * Output a block of characters with OPOST processing. + * Returns the number of characters output. + * + * This path is used to speed up block console writes, among other + * things when processing blocks of output data. It handles only + * the simple cases normally found and helps to generate blocks of + * symbols for the console driver and thus improve performance. + * + * Locking: output_lock to protect column state and space left + * (also, this is called from n_tty_write under the + * tty layer write lock) + */ + +static ssize_t process_output_block(struct tty_struct *tty, + const unsigned char *buf, unsigned int nr) +{ + struct n_tty_data *ldata = tty->disc_data; + int space; + int i; + const unsigned char *cp; + + mutex_lock(&ldata->output_lock); + + space = tty_write_room(tty); + if (space <= 0) { + mutex_unlock(&ldata->output_lock); + return space; + } + if (nr > space) + nr = space; + + for (i = 0, cp = buf; i < nr; i++, cp++) { + unsigned char c = *cp; + + switch (c) { + case '\n': + if (O_ONLRET(tty)) + ldata->column = 0; + if (O_ONLCR(tty)) + goto break_out; + ldata->canon_column = ldata->column; + break; + case '\r': + if (O_ONOCR(tty) && ldata->column == 0) + goto break_out; + if (O_OCRNL(tty)) + goto break_out; + ldata->canon_column = ldata->column = 0; + break; + case '\t': + goto break_out; + case '\b': + if (ldata->column > 0) + ldata->column--; + break; + default: + if (!iscntrl(c)) { + if (O_OLCUC(tty)) + goto break_out; + if (!is_continuation(c, tty)) + ldata->column++; + } + break; + } + } +break_out: + i = tty->ops->write(tty, buf, i); + + mutex_unlock(&ldata->output_lock); + return i; +} + +/** + * process_echoes - write pending echo characters + * @tty: terminal device + * + * Write previously buffered echo (and other ldisc-generated) + * characters to the tty. + * + * Characters generated by the ldisc (including echoes) need to + * be buffered because the driver's write buffer can fill during + * heavy program output. Echoing straight to the driver will + * often fail under these conditions, causing lost characters and + * resulting mismatches of ldisc state information. + * + * Since the ldisc state must represent the characters actually sent + * to the driver at the time of the write, operations like certain + * changes in column state are also saved in the buffer and executed + * here. + * + * A circular fifo buffer is used so that the most recent characters + * are prioritized. Also, when control characters are echoed with a + * prefixed "^", the pair is treated atomically and thus not separated. + * + * Locking: callers must hold output_lock + */ + +static size_t __process_echoes(struct tty_struct *tty) +{ + struct n_tty_data *ldata = tty->disc_data; + int space, old_space; + size_t tail; + unsigned char c; + + old_space = space = tty_write_room(tty); + + tail = ldata->echo_tail; + while (MASK(ldata->echo_commit) != MASK(tail)) { + c = echo_buf(ldata, tail); + if (c == ECHO_OP_START) { + unsigned char op; + int no_space_left = 0; + + /* + * Since add_echo_byte() is called without holding + * output_lock, we might see only portion of multi-byte + * operation. + */ + if (MASK(ldata->echo_commit) == MASK(tail + 1)) + goto not_yet_stored; + /* + * If the buffer byte is the start of a multi-byte + * operation, get the next byte, which is either the + * op code or a control character value. + */ + op = echo_buf(ldata, tail + 1); + + switch (op) { + case ECHO_OP_ERASE_TAB: { + unsigned int num_chars, num_bs; + + if (MASK(ldata->echo_commit) == MASK(tail + 2)) + goto not_yet_stored; + num_chars = echo_buf(ldata, tail + 2); + + /* + * Determine how many columns to go back + * in order to erase the tab. + * This depends on the number of columns + * used by other characters within the tab + * area. If this (modulo 8) count is from + * the start of input rather than from a + * previous tab, we offset by canon column. + * Otherwise, tab spacing is normal. + */ + if (!(num_chars & 0x80)) + num_chars += ldata->canon_column; + num_bs = 8 - (num_chars & 7); + + if (num_bs > space) { + no_space_left = 1; + break; + } + space -= num_bs; + while (num_bs--) { + tty_put_char(tty, '\b'); + if (ldata->column > 0) + ldata->column--; + } + tail += 3; + break; + } + case ECHO_OP_SET_CANON_COL: + ldata->canon_column = ldata->column; + tail += 2; + break; + + case ECHO_OP_MOVE_BACK_COL: + if (ldata->column > 0) + ldata->column--; + tail += 2; + break; + + case ECHO_OP_START: + /* This is an escaped echo op start code */ + if (!space) { + no_space_left = 1; + break; + } + tty_put_char(tty, ECHO_OP_START); + ldata->column++; + space--; + tail += 2; + break; + + default: + /* + * If the op is not a special byte code, + * it is a ctrl char tagged to be echoed + * as "^X" (where X is the letter + * representing the control char). + * Note that we must ensure there is + * enough space for the whole ctrl pair. + * + */ + if (space < 2) { + no_space_left = 1; + break; + } + tty_put_char(tty, '^'); + tty_put_char(tty, op ^ 0100); + ldata->column += 2; + space -= 2; + tail += 2; + } + + if (no_space_left) + break; + } else { + if (O_OPOST(tty)) { + int retval = do_output_char(c, tty, space); + if (retval < 0) + break; + space -= retval; + } else { + if (!space) + break; + tty_put_char(tty, c); + space -= 1; + } + tail += 1; + } + } + + /* If the echo buffer is nearly full (so that the possibility exists + * of echo overrun before the next commit), then discard enough + * data at the tail to prevent a subsequent overrun */ + while (ldata->echo_commit > tail && + ldata->echo_commit - tail >= ECHO_DISCARD_WATERMARK) { + if (echo_buf(ldata, tail) == ECHO_OP_START) { + if (echo_buf(ldata, tail + 1) == ECHO_OP_ERASE_TAB) + tail += 3; + else + tail += 2; + } else + tail++; + } + + not_yet_stored: + ldata->echo_tail = tail; + return old_space - space; +} + +static void commit_echoes(struct tty_struct *tty) +{ + struct n_tty_data *ldata = tty->disc_data; + size_t nr, old, echoed; + size_t head; + + mutex_lock(&ldata->output_lock); + head = ldata->echo_head; + ldata->echo_mark = head; + old = ldata->echo_commit - ldata->echo_tail; + + /* Process committed echoes if the accumulated # of bytes + * is over the threshold (and try again each time another + * block is accumulated) */ + nr = head - ldata->echo_tail; + if (nr < ECHO_COMMIT_WATERMARK || + (nr % ECHO_BLOCK > old % ECHO_BLOCK)) { + mutex_unlock(&ldata->output_lock); + return; + } + + ldata->echo_commit = head; + echoed = __process_echoes(tty); + mutex_unlock(&ldata->output_lock); + + if (echoed && tty->ops->flush_chars) + tty->ops->flush_chars(tty); +} + +static void process_echoes(struct tty_struct *tty) +{ + struct n_tty_data *ldata = tty->disc_data; + size_t echoed; + + if (ldata->echo_mark == ldata->echo_tail) + return; + + mutex_lock(&ldata->output_lock); + ldata->echo_commit = ldata->echo_mark; + echoed = __process_echoes(tty); + mutex_unlock(&ldata->output_lock); + + if (echoed && tty->ops->flush_chars) + tty->ops->flush_chars(tty); +} + +/* NB: echo_mark and echo_head should be equivalent here */ +static void flush_echoes(struct tty_struct *tty) +{ + struct n_tty_data *ldata = tty->disc_data; + + if ((!L_ECHO(tty) && !L_ECHONL(tty)) || + ldata->echo_commit == ldata->echo_head) + return; + + mutex_lock(&ldata->output_lock); + ldata->echo_commit = ldata->echo_head; + __process_echoes(tty); + mutex_unlock(&ldata->output_lock); +} + +/** + * add_echo_byte - add a byte to the echo buffer + * @c: unicode byte to echo + * @ldata: n_tty data + * + * Add a character or operation byte to the echo buffer. + */ + +static inline void add_echo_byte(unsigned char c, struct n_tty_data *ldata) +{ + *echo_buf_addr(ldata, ldata->echo_head) = c; + smp_wmb(); /* Matches smp_rmb() in echo_buf(). */ + ldata->echo_head++; +} + +/** + * echo_move_back_col - add operation to move back a column + * @ldata: n_tty data + * + * Add an operation to the echo buffer to move back one column. + */ + +static void echo_move_back_col(struct n_tty_data *ldata) +{ + add_echo_byte(ECHO_OP_START, ldata); + add_echo_byte(ECHO_OP_MOVE_BACK_COL, ldata); +} + +/** + * echo_set_canon_col - add operation to set the canon column + * @ldata: n_tty data + * + * Add an operation to the echo buffer to set the canon column + * to the current column. + */ + +static void echo_set_canon_col(struct n_tty_data *ldata) +{ + add_echo_byte(ECHO_OP_START, ldata); + add_echo_byte(ECHO_OP_SET_CANON_COL, ldata); +} + +/** + * echo_erase_tab - add operation to erase a tab + * @num_chars: number of character columns already used + * @after_tab: true if num_chars starts after a previous tab + * @ldata: n_tty data + * + * Add an operation to the echo buffer to erase a tab. + * + * Called by the eraser function, which knows how many character + * columns have been used since either a previous tab or the start + * of input. This information will be used later, along with + * canon column (if applicable), to go back the correct number + * of columns. + */ + +static void echo_erase_tab(unsigned int num_chars, int after_tab, + struct n_tty_data *ldata) +{ + add_echo_byte(ECHO_OP_START, ldata); + add_echo_byte(ECHO_OP_ERASE_TAB, ldata); + + /* We only need to know this modulo 8 (tab spacing) */ + num_chars &= 7; + + /* Set the high bit as a flag if num_chars is after a previous tab */ + if (after_tab) + num_chars |= 0x80; + + add_echo_byte(num_chars, ldata); +} + +/** + * echo_char_raw - echo a character raw + * @c: unicode byte to echo + * @ldata: line disc data + * + * Echo user input back onto the screen. This must be called only when + * L_ECHO(tty) is true. Called from the driver receive_buf path. + * + * This variant does not treat control characters specially. + */ + +static void echo_char_raw(unsigned char c, struct n_tty_data *ldata) +{ + if (c == ECHO_OP_START) { + add_echo_byte(ECHO_OP_START, ldata); + add_echo_byte(ECHO_OP_START, ldata); + } else { + add_echo_byte(c, ldata); + } +} + +/** + * echo_char - echo a character + * @c: unicode byte to echo + * @tty: terminal device + * + * Echo user input back onto the screen. This must be called only when + * L_ECHO(tty) is true. Called from the driver receive_buf path. + * + * This variant tags control characters to be echoed as "^X" + * (where X is the letter representing the control char). + */ + +static void echo_char(unsigned char c, struct tty_struct *tty) +{ + struct n_tty_data *ldata = tty->disc_data; + + if (c == ECHO_OP_START) { + add_echo_byte(ECHO_OP_START, ldata); + add_echo_byte(ECHO_OP_START, ldata); + } else { + if (L_ECHOCTL(tty) && iscntrl(c) && c != '\t') + add_echo_byte(ECHO_OP_START, ldata); + add_echo_byte(c, ldata); + } +} + +/** + * finish_erasing - complete erase + * @ldata: n_tty data + */ + +static inline void finish_erasing(struct n_tty_data *ldata) +{ + if (ldata->erasing) { + echo_char_raw('/', ldata); + ldata->erasing = 0; + } +} + +/** + * eraser - handle erase function + * @c: character input + * @tty: terminal device + * + * Perform erase and necessary output when an erase character is + * present in the stream from the driver layer. Handles the complexities + * of UTF-8 multibyte symbols. + * + * n_tty_receive_buf()/producer path: + * caller holds non-exclusive termios_rwsem + */ + +static void eraser(unsigned char c, struct tty_struct *tty) +{ + struct n_tty_data *ldata = tty->disc_data; + enum { ERASE, WERASE, KILL } kill_type; + size_t head; + size_t cnt; + int seen_alnums; + + if (ldata->read_head == ldata->canon_head) { + /* process_output('\a', tty); */ /* what do you think? */ + return; + } + if (c == ERASE_CHAR(tty)) + kill_type = ERASE; + else if (c == WERASE_CHAR(tty)) + kill_type = WERASE; + else { + if (!L_ECHO(tty)) { + ldata->read_head = ldata->canon_head; + return; + } + if (!L_ECHOK(tty) || !L_ECHOKE(tty) || !L_ECHOE(tty)) { + ldata->read_head = ldata->canon_head; + finish_erasing(ldata); + echo_char(KILL_CHAR(tty), tty); + /* Add a newline if ECHOK is on and ECHOKE is off. */ + if (L_ECHOK(tty)) + echo_char_raw('\n', ldata); + return; + } + kill_type = KILL; + } + + seen_alnums = 0; + while (MASK(ldata->read_head) != MASK(ldata->canon_head)) { + head = ldata->read_head; + + /* erase a single possibly multibyte character */ + do { + head--; + c = read_buf(ldata, head); + } while (is_continuation(c, tty) && + MASK(head) != MASK(ldata->canon_head)); + + /* do not partially erase */ + if (is_continuation(c, tty)) + break; + + if (kill_type == WERASE) { + /* Equivalent to BSD's ALTWERASE. */ + if (isalnum(c) || c == '_') + seen_alnums++; + else if (seen_alnums) + break; + } + cnt = ldata->read_head - head; + ldata->read_head = head; + if (L_ECHO(tty)) { + if (L_ECHOPRT(tty)) { + if (!ldata->erasing) { + echo_char_raw('\\', ldata); + ldata->erasing = 1; + } + /* if cnt > 1, output a multi-byte character */ + echo_char(c, tty); + while (--cnt > 0) { + head++; + echo_char_raw(read_buf(ldata, head), ldata); + echo_move_back_col(ldata); + } + } else if (kill_type == ERASE && !L_ECHOE(tty)) { + echo_char(ERASE_CHAR(tty), tty); + } else if (c == '\t') { + unsigned int num_chars = 0; + int after_tab = 0; + size_t tail = ldata->read_head; + + /* + * Count the columns used for characters + * since the start of input or after a + * previous tab. + * This info is used to go back the correct + * number of columns. + */ + while (MASK(tail) != MASK(ldata->canon_head)) { + tail--; + c = read_buf(ldata, tail); + if (c == '\t') { + after_tab = 1; + break; + } else if (iscntrl(c)) { + if (L_ECHOCTL(tty)) + num_chars += 2; + } else if (!is_continuation(c, tty)) { + num_chars++; + } + } + echo_erase_tab(num_chars, after_tab, ldata); + } else { + if (iscntrl(c) && L_ECHOCTL(tty)) { + echo_char_raw('\b', ldata); + echo_char_raw(' ', ldata); + echo_char_raw('\b', ldata); + } + if (!iscntrl(c) || L_ECHOCTL(tty)) { + echo_char_raw('\b', ldata); + echo_char_raw(' ', ldata); + echo_char_raw('\b', ldata); + } + } + } + if (kill_type == ERASE) + break; + } + if (ldata->read_head == ldata->canon_head && L_ECHO(tty)) + finish_erasing(ldata); +} + +/** + * isig - handle the ISIG optio + * @sig: signal + * @tty: terminal + * + * Called when a signal is being sent due to terminal input. + * Called from the driver receive_buf path so serialized. + * + * Performs input and output flush if !NOFLSH. In this context, the echo + * buffer is 'output'. The signal is processed first to alert any current + * readers or writers to discontinue and exit their i/o loops. + * + * Locking: ctrl_lock + */ + +static void __isig(int sig, struct tty_struct *tty) +{ + struct pid *tty_pgrp = tty_get_pgrp(tty); + if (tty_pgrp) { + kill_pgrp(tty_pgrp, sig, 1); + put_pid(tty_pgrp); + } +} + +static void isig(int sig, struct tty_struct *tty) +{ + struct n_tty_data *ldata = tty->disc_data; + + if (L_NOFLSH(tty)) { + /* signal only */ + __isig(sig, tty); + + } else { /* signal and flush */ + up_read(&tty->termios_rwsem); + down_write(&tty->termios_rwsem); + + __isig(sig, tty); + + /* clear echo buffer */ + mutex_lock(&ldata->output_lock); + ldata->echo_head = ldata->echo_tail = 0; + ldata->echo_mark = ldata->echo_commit = 0; + mutex_unlock(&ldata->output_lock); + + /* clear output buffer */ + tty_driver_flush_buffer(tty); + + /* clear input buffer */ + reset_buffer_flags(tty->disc_data); + + /* notify pty master of flush */ + if (tty->link) + n_tty_packet_mode_flush(tty); + + up_write(&tty->termios_rwsem); + down_read(&tty->termios_rwsem); + } +} + +/** + * n_tty_receive_break - handle break + * @tty: terminal + * + * An RS232 break event has been hit in the incoming bitstream. This + * can cause a variety of events depending upon the termios settings. + * + * n_tty_receive_buf()/producer path: + * caller holds non-exclusive termios_rwsem + * + * Note: may get exclusive termios_rwsem if flushing input buffer + */ + +static void n_tty_receive_break(struct tty_struct *tty) +{ + struct n_tty_data *ldata = tty->disc_data; + + if (I_IGNBRK(tty)) + return; + if (I_BRKINT(tty)) { + isig(SIGINT, tty); + return; + } + if (I_PARMRK(tty)) { + put_tty_queue('\377', ldata); + put_tty_queue('\0', ldata); + } + put_tty_queue('\0', ldata); +} + +/** + * n_tty_receive_overrun - handle overrun reporting + * @tty: terminal + * + * Data arrived faster than we could process it. While the tty + * driver has flagged this the bits that were missed are gone + * forever. + * + * Called from the receive_buf path so single threaded. Does not + * need locking as num_overrun and overrun_time are function + * private. + */ + +static void n_tty_receive_overrun(struct tty_struct *tty) +{ + struct n_tty_data *ldata = tty->disc_data; + + ldata->num_overrun++; + if (time_after(jiffies, ldata->overrun_time + HZ) || + time_after(ldata->overrun_time, jiffies)) { + tty_warn(tty, "%d input overrun(s)\n", ldata->num_overrun); + ldata->overrun_time = jiffies; + ldata->num_overrun = 0; + } +} + +/** + * n_tty_receive_parity_error - error notifier + * @tty: terminal device + * @c: character + * + * Process a parity error and queue the right data to indicate + * the error case if necessary. + * + * n_tty_receive_buf()/producer path: + * caller holds non-exclusive termios_rwsem + */ +static void n_tty_receive_parity_error(struct tty_struct *tty, unsigned char c) +{ + struct n_tty_data *ldata = tty->disc_data; + + if (I_INPCK(tty)) { + if (I_IGNPAR(tty)) + return; + if (I_PARMRK(tty)) { + put_tty_queue('\377', ldata); + put_tty_queue('\0', ldata); + put_tty_queue(c, ldata); + } else + put_tty_queue('\0', ldata); + } else + put_tty_queue(c, ldata); +} + +static void +n_tty_receive_signal_char(struct tty_struct *tty, int signal, unsigned char c) +{ + isig(signal, tty); + if (I_IXON(tty)) + start_tty(tty); + if (L_ECHO(tty)) { + echo_char(c, tty); + commit_echoes(tty); + } else + process_echoes(tty); + return; +} + +/** + * n_tty_receive_char - perform processing + * @tty: terminal device + * @c: character + * + * Process an individual character of input received from the driver. + * This is serialized with respect to itself by the rules for the + * driver above. + * + * n_tty_receive_buf()/producer path: + * caller holds non-exclusive termios_rwsem + * publishes canon_head if canonical mode is active + * + * Returns 1 if LNEXT was received, else returns 0 + */ + +static int +n_tty_receive_char_special(struct tty_struct *tty, unsigned char c) +{ + struct n_tty_data *ldata = tty->disc_data; + + if (I_IXON(tty)) { + if (c == START_CHAR(tty)) { + start_tty(tty); + process_echoes(tty); + return 0; + } + if (c == STOP_CHAR(tty)) { + stop_tty(tty); + return 0; + } + } + + if (L_ISIG(tty)) { + if (c == INTR_CHAR(tty)) { + n_tty_receive_signal_char(tty, SIGINT, c); + return 0; + } else if (c == QUIT_CHAR(tty)) { + n_tty_receive_signal_char(tty, SIGQUIT, c); + return 0; + } else if (c == SUSP_CHAR(tty)) { + n_tty_receive_signal_char(tty, SIGTSTP, c); + return 0; + } + } + + if (tty->stopped && !tty->flow_stopped && I_IXON(tty) && I_IXANY(tty)) { + start_tty(tty); + process_echoes(tty); + } + + if (c == '\r') { + if (I_IGNCR(tty)) + return 0; + if (I_ICRNL(tty)) + c = '\n'; + } else if (c == '\n' && I_INLCR(tty)) + c = '\r'; + + if (ldata->icanon) { + if (c == ERASE_CHAR(tty) || c == KILL_CHAR(tty) || + (c == WERASE_CHAR(tty) && L_IEXTEN(tty))) { + eraser(c, tty); + commit_echoes(tty); + return 0; + } + if (c == LNEXT_CHAR(tty) && L_IEXTEN(tty)) { + ldata->lnext = 1; + if (L_ECHO(tty)) { + finish_erasing(ldata); + if (L_ECHOCTL(tty)) { + echo_char_raw('^', ldata); + echo_char_raw('\b', ldata); + commit_echoes(tty); + } + } + return 1; + } + if (c == REPRINT_CHAR(tty) && L_ECHO(tty) && L_IEXTEN(tty)) { + size_t tail = ldata->canon_head; + + finish_erasing(ldata); + echo_char(c, tty); + echo_char_raw('\n', ldata); + while (MASK(tail) != MASK(ldata->read_head)) { + echo_char(read_buf(ldata, tail), tty); + tail++; + } + commit_echoes(tty); + return 0; + } + if (c == '\n') { + if (L_ECHO(tty) || L_ECHONL(tty)) { + echo_char_raw('\n', ldata); + commit_echoes(tty); + } + goto handle_newline; + } + if (c == EOF_CHAR(tty)) { + c = __DISABLED_CHAR; + goto handle_newline; + } + if ((c == EOL_CHAR(tty)) || + (c == EOL2_CHAR(tty) && L_IEXTEN(tty))) { + /* + * XXX are EOL_CHAR and EOL2_CHAR echoed?!? + */ + if (L_ECHO(tty)) { + /* Record the column of first canon char. */ + if (ldata->canon_head == ldata->read_head) + echo_set_canon_col(ldata); + echo_char(c, tty); + commit_echoes(tty); + } + /* + * XXX does PARMRK doubling happen for + * EOL_CHAR and EOL2_CHAR? + */ + if (c == (unsigned char) '\377' && I_PARMRK(tty)) + put_tty_queue(c, ldata); + +handle_newline: + set_bit(ldata->read_head & (N_TTY_BUF_SIZE - 1), ldata->read_flags); + put_tty_queue(c, ldata); + smp_store_release(&ldata->canon_head, ldata->read_head); + kill_fasync(&tty->fasync, SIGIO, POLL_IN); + wake_up_interruptible_poll(&tty->read_wait, EPOLLIN | EPOLLRDNORM); + return 0; + } + } + + if (L_ECHO(tty)) { + finish_erasing(ldata); + if (c == '\n') + echo_char_raw('\n', ldata); + else { + /* Record the column of first canon char. */ + if (ldata->canon_head == ldata->read_head) + echo_set_canon_col(ldata); + echo_char(c, tty); + } + commit_echoes(tty); + } + + /* PARMRK doubling check */ + if (c == (unsigned char) '\377' && I_PARMRK(tty)) + put_tty_queue(c, ldata); + + put_tty_queue(c, ldata); + return 0; +} + +static inline void +n_tty_receive_char_inline(struct tty_struct *tty, unsigned char c) +{ + struct n_tty_data *ldata = tty->disc_data; + + if (tty->stopped && !tty->flow_stopped && I_IXON(tty) && I_IXANY(tty)) { + start_tty(tty); + process_echoes(tty); + } + if (L_ECHO(tty)) { + finish_erasing(ldata); + /* Record the column of first canon char. */ + if (ldata->canon_head == ldata->read_head) + echo_set_canon_col(ldata); + echo_char(c, tty); + commit_echoes(tty); + } + /* PARMRK doubling check */ + if (c == (unsigned char) '\377' && I_PARMRK(tty)) + put_tty_queue(c, ldata); + put_tty_queue(c, ldata); +} + +static void n_tty_receive_char(struct tty_struct *tty, unsigned char c) +{ + n_tty_receive_char_inline(tty, c); +} + +static inline void +n_tty_receive_char_fast(struct tty_struct *tty, unsigned char c) +{ + struct n_tty_data *ldata = tty->disc_data; + + if (tty->stopped && !tty->flow_stopped && I_IXON(tty) && I_IXANY(tty)) { + start_tty(tty); + process_echoes(tty); + } + if (L_ECHO(tty)) { + finish_erasing(ldata); + /* Record the column of first canon char. */ + if (ldata->canon_head == ldata->read_head) + echo_set_canon_col(ldata); + echo_char(c, tty); + commit_echoes(tty); + } + put_tty_queue(c, ldata); +} + +static void n_tty_receive_char_closing(struct tty_struct *tty, unsigned char c) +{ + if (I_ISTRIP(tty)) + c &= 0x7f; + if (I_IUCLC(tty) && L_IEXTEN(tty)) + c = tolower(c); + + if (I_IXON(tty)) { + if (c == STOP_CHAR(tty)) + stop_tty(tty); + else if (c == START_CHAR(tty) || + (tty->stopped && !tty->flow_stopped && I_IXANY(tty) && + c != INTR_CHAR(tty) && c != QUIT_CHAR(tty) && + c != SUSP_CHAR(tty))) { + start_tty(tty); + process_echoes(tty); + } + } +} + +static void +n_tty_receive_char_flagged(struct tty_struct *tty, unsigned char c, char flag) +{ + switch (flag) { + case TTY_BREAK: + n_tty_receive_break(tty); + break; + case TTY_PARITY: + case TTY_FRAME: + n_tty_receive_parity_error(tty, c); + break; + case TTY_OVERRUN: + n_tty_receive_overrun(tty); + break; + default: + tty_err(tty, "unknown flag %d\n", flag); + break; + } +} + +static void +n_tty_receive_char_lnext(struct tty_struct *tty, unsigned char c, char flag) +{ + struct n_tty_data *ldata = tty->disc_data; + + ldata->lnext = 0; + if (likely(flag == TTY_NORMAL)) { + if (I_ISTRIP(tty)) + c &= 0x7f; + if (I_IUCLC(tty) && L_IEXTEN(tty)) + c = tolower(c); + n_tty_receive_char(tty, c); + } else + n_tty_receive_char_flagged(tty, c, flag); +} + +static void +n_tty_receive_buf_real_raw(struct tty_struct *tty, const unsigned char *cp, + char *fp, int count) +{ + struct n_tty_data *ldata = tty->disc_data; + size_t n, head; + + head = ldata->read_head & (N_TTY_BUF_SIZE - 1); + n = min_t(size_t, count, N_TTY_BUF_SIZE - head); + memcpy(read_buf_addr(ldata, head), cp, n); + ldata->read_head += n; + cp += n; + count -= n; + + head = ldata->read_head & (N_TTY_BUF_SIZE - 1); + n = min_t(size_t, count, N_TTY_BUF_SIZE - head); + memcpy(read_buf_addr(ldata, head), cp, n); + ldata->read_head += n; +} + +static void +n_tty_receive_buf_raw(struct tty_struct *tty, const unsigned char *cp, + char *fp, int count) +{ + struct n_tty_data *ldata = tty->disc_data; + char flag = TTY_NORMAL; + + while (count--) { + if (fp) + flag = *fp++; + if (likely(flag == TTY_NORMAL)) + put_tty_queue(*cp++, ldata); + else + n_tty_receive_char_flagged(tty, *cp++, flag); + } +} + +static void +n_tty_receive_buf_closing(struct tty_struct *tty, const unsigned char *cp, + char *fp, int count) +{ + char flag = TTY_NORMAL; + + while (count--) { + if (fp) + flag = *fp++; + if (likely(flag == TTY_NORMAL)) + n_tty_receive_char_closing(tty, *cp++); + } +} + +static void +n_tty_receive_buf_standard(struct tty_struct *tty, const unsigned char *cp, + char *fp, int count) +{ + struct n_tty_data *ldata = tty->disc_data; + char flag = TTY_NORMAL; + + while (count--) { + if (fp) + flag = *fp++; + if (likely(flag == TTY_NORMAL)) { + unsigned char c = *cp++; + + if (I_ISTRIP(tty)) + c &= 0x7f; + if (I_IUCLC(tty) && L_IEXTEN(tty)) + c = tolower(c); + if (L_EXTPROC(tty)) { + put_tty_queue(c, ldata); + continue; + } + if (!test_bit(c, ldata->char_map)) + n_tty_receive_char_inline(tty, c); + else if (n_tty_receive_char_special(tty, c) && count) { + if (fp) + flag = *fp++; + n_tty_receive_char_lnext(tty, *cp++, flag); + count--; + } + } else + n_tty_receive_char_flagged(tty, *cp++, flag); + } +} + +static void +n_tty_receive_buf_fast(struct tty_struct *tty, const unsigned char *cp, + char *fp, int count) +{ + struct n_tty_data *ldata = tty->disc_data; + char flag = TTY_NORMAL; + + while (count--) { + if (fp) + flag = *fp++; + if (likely(flag == TTY_NORMAL)) { + unsigned char c = *cp++; + + if (!test_bit(c, ldata->char_map)) + n_tty_receive_char_fast(tty, c); + else if (n_tty_receive_char_special(tty, c) && count) { + if (fp) + flag = *fp++; + n_tty_receive_char_lnext(tty, *cp++, flag); + count--; + } + } else + n_tty_receive_char_flagged(tty, *cp++, flag); + } +} + +static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, + char *fp, int count) +{ + struct n_tty_data *ldata = tty->disc_data; + bool preops = I_ISTRIP(tty) || (I_IUCLC(tty) && L_IEXTEN(tty)); + + if (ldata->real_raw) + n_tty_receive_buf_real_raw(tty, cp, fp, count); + else if (ldata->raw || (L_EXTPROC(tty) && !preops)) + n_tty_receive_buf_raw(tty, cp, fp, count); + else if (tty->closing && !L_EXTPROC(tty)) + n_tty_receive_buf_closing(tty, cp, fp, count); + else { + if (ldata->lnext) { + char flag = TTY_NORMAL; + + if (fp) + flag = *fp++; + n_tty_receive_char_lnext(tty, *cp++, flag); + count--; + } + + if (!preops && !I_PARMRK(tty)) + n_tty_receive_buf_fast(tty, cp, fp, count); + else + n_tty_receive_buf_standard(tty, cp, fp, count); + + flush_echoes(tty); + if (tty->ops->flush_chars) + tty->ops->flush_chars(tty); + } + + if (ldata->icanon && !L_EXTPROC(tty)) + return; + + /* publish read_head to consumer */ + smp_store_release(&ldata->commit_head, ldata->read_head); + + if (read_cnt(ldata)) { + kill_fasync(&tty->fasync, SIGIO, POLL_IN); + wake_up_interruptible_poll(&tty->read_wait, EPOLLIN | EPOLLRDNORM); + } +} + +/** + * n_tty_receive_buf_common - process input + * @tty: device to receive input + * @cp: input chars + * @fp: flags for each char (if NULL, all chars are TTY_NORMAL) + * @count: number of input chars in @cp + * + * Called by the terminal driver when a block of characters has + * been received. This function must be called from soft contexts + * not from interrupt context. The driver is responsible for making + * calls one at a time and in order (or using flush_to_ldisc) + * + * Returns the # of input chars from @cp which were processed. + * + * In canonical mode, the maximum line length is 4096 chars (including + * the line termination char); lines longer than 4096 chars are + * truncated. After 4095 chars, input data is still processed but + * not stored. Overflow processing ensures the tty can always + * receive more input until at least one line can be read. + * + * In non-canonical mode, the read buffer will only accept 4095 chars; + * this provides the necessary space for a newline char if the input + * mode is switched to canonical. + * + * Note it is possible for the read buffer to _contain_ 4096 chars + * in non-canonical mode: the read buffer could already contain the + * maximum canon line of 4096 chars when the mode is switched to + * non-canonical. + * + * n_tty_receive_buf()/producer path: + * claims non-exclusive termios_rwsem + * publishes commit_head or canon_head + */ +static int +n_tty_receive_buf_common(struct tty_struct *tty, const unsigned char *cp, + char *fp, int count, int flow) +{ + struct n_tty_data *ldata = tty->disc_data; + int room, n, rcvd = 0, overflow; + + down_read(&tty->termios_rwsem); + + do { + /* + * When PARMRK is set, each input char may take up to 3 chars + * in the read buf; reduce the buffer space avail by 3x + * + * If we are doing input canonicalization, and there are no + * pending newlines, let characters through without limit, so + * that erase characters will be handled. Other excess + * characters will be beeped. + * + * paired with store in *_copy_from_read_buf() -- guarantees + * the consumer has loaded the data in read_buf up to the new + * read_tail (so this producer will not overwrite unread data) + */ + size_t tail = smp_load_acquire(&ldata->read_tail); + + room = N_TTY_BUF_SIZE - (ldata->read_head - tail); + if (I_PARMRK(tty)) + room = (room + 2) / 3; + room--; + if (room <= 0) { + overflow = ldata->icanon && ldata->canon_head == tail; + if (overflow && room < 0) + ldata->read_head--; + room = overflow; + ldata->no_room = flow && !room; + } else + overflow = 0; + + n = min(count, room); + if (!n) + break; + + /* ignore parity errors if handling overflow */ + if (!overflow || !fp || *fp != TTY_PARITY) + __receive_buf(tty, cp, fp, n); + + cp += n; + if (fp) + fp += n; + count -= n; + rcvd += n; + } while (!test_bit(TTY_LDISC_CHANGING, &tty->flags)); + + tty->receive_room = room; + + /* Unthrottle if handling overflow on pty */ + if (tty->driver->type == TTY_DRIVER_TYPE_PTY) { + if (overflow) { + tty_set_flow_change(tty, TTY_UNTHROTTLE_SAFE); + tty_unthrottle_safe(tty); + __tty_set_flow_change(tty, 0); + } + } else + n_tty_check_throttle(tty); + + up_read(&tty->termios_rwsem); + + return rcvd; +} + +static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp, + char *fp, int count) +{ + n_tty_receive_buf_common(tty, cp, fp, count, 0); +} + +static int n_tty_receive_buf2(struct tty_struct *tty, const unsigned char *cp, + char *fp, int count) +{ + return n_tty_receive_buf_common(tty, cp, fp, count, 1); +} + +/** + * n_tty_set_termios - termios data changed + * @tty: terminal + * @old: previous data + * + * Called by the tty layer when the user changes termios flags so + * that the line discipline can plan ahead. This function cannot sleep + * and is protected from re-entry by the tty layer. The user is + * guaranteed that this function will not be re-entered or in progress + * when the ldisc is closed. + * + * Locking: Caller holds tty->termios_rwsem + */ + +static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old) +{ + struct n_tty_data *ldata = tty->disc_data; + + if (!old || (old->c_lflag ^ tty->termios.c_lflag) & (ICANON | EXTPROC)) { + bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE); + ldata->line_start = ldata->read_tail; + if (!L_ICANON(tty) || !read_cnt(ldata)) { + ldata->canon_head = ldata->read_tail; + ldata->push = 0; + } else { + set_bit((ldata->read_head - 1) & (N_TTY_BUF_SIZE - 1), + ldata->read_flags); + ldata->canon_head = ldata->read_head; + ldata->push = 1; + } + ldata->commit_head = ldata->read_head; + ldata->erasing = 0; + ldata->lnext = 0; + } + + ldata->icanon = (L_ICANON(tty) != 0); + + if (I_ISTRIP(tty) || I_IUCLC(tty) || I_IGNCR(tty) || + I_ICRNL(tty) || I_INLCR(tty) || L_ICANON(tty) || + I_IXON(tty) || L_ISIG(tty) || L_ECHO(tty) || + I_PARMRK(tty)) { + bitmap_zero(ldata->char_map, 256); + + if (I_IGNCR(tty) || I_ICRNL(tty)) + set_bit('\r', ldata->char_map); + if (I_INLCR(tty)) + set_bit('\n', ldata->char_map); + + if (L_ICANON(tty)) { + set_bit(ERASE_CHAR(tty), ldata->char_map); + set_bit(KILL_CHAR(tty), ldata->char_map); + set_bit(EOF_CHAR(tty), ldata->char_map); + set_bit('\n', ldata->char_map); + set_bit(EOL_CHAR(tty), ldata->char_map); + if (L_IEXTEN(tty)) { + set_bit(WERASE_CHAR(tty), ldata->char_map); + set_bit(LNEXT_CHAR(tty), ldata->char_map); + set_bit(EOL2_CHAR(tty), ldata->char_map); + if (L_ECHO(tty)) + set_bit(REPRINT_CHAR(tty), + ldata->char_map); + } + } + if (I_IXON(tty)) { + set_bit(START_CHAR(tty), ldata->char_map); + set_bit(STOP_CHAR(tty), ldata->char_map); + } + if (L_ISIG(tty)) { + set_bit(INTR_CHAR(tty), ldata->char_map); + set_bit(QUIT_CHAR(tty), ldata->char_map); + set_bit(SUSP_CHAR(tty), ldata->char_map); + } + clear_bit(__DISABLED_CHAR, ldata->char_map); + ldata->raw = 0; + ldata->real_raw = 0; + } else { + ldata->raw = 1; + if ((I_IGNBRK(tty) || (!I_BRKINT(tty) && !I_PARMRK(tty))) && + (I_IGNPAR(tty) || !I_INPCK(tty)) && + (tty->driver->flags & TTY_DRIVER_REAL_RAW)) + ldata->real_raw = 1; + else + ldata->real_raw = 0; + } + /* + * Fix tty hang when I_IXON(tty) is cleared, but the tty + * been stopped by STOP_CHAR(tty) before it. + */ + if (!I_IXON(tty) && old && (old->c_iflag & IXON) && !tty->flow_stopped) { + start_tty(tty); + process_echoes(tty); + } + + /* The termios change make the tty ready for I/O */ + wake_up_interruptible(&tty->write_wait); + wake_up_interruptible(&tty->read_wait); +} + +/** + * n_tty_close - close the ldisc for this tty + * @tty: device + * + * Called from the terminal layer when this line discipline is + * being shut down, either because of a close or becsuse of a + * discipline change. The function will not be called while other + * ldisc methods are in progress. + */ + +static void n_tty_close(struct tty_struct *tty) +{ + struct n_tty_data *ldata = tty->disc_data; + + if (tty->link) + n_tty_packet_mode_flush(tty); + + vfree(ldata); + tty->disc_data = NULL; +} + +/** + * n_tty_open - open an ldisc + * @tty: terminal to open + * + * Called when this line discipline is being attached to the + * terminal device. Can sleep. Called serialized so that no + * other events will occur in parallel. No further open will occur + * until a close. + */ + +static int n_tty_open(struct tty_struct *tty) +{ + struct n_tty_data *ldata; + + /* Currently a malloc failure here can panic */ + ldata = vzalloc(sizeof(*ldata)); + if (!ldata) + return -ENOMEM; + + ldata->overrun_time = jiffies; + mutex_init(&ldata->atomic_read_lock); + mutex_init(&ldata->output_lock); + + tty->disc_data = ldata; + tty->closing = 0; + /* indicate buffer work may resume */ + clear_bit(TTY_LDISC_HALTED, &tty->flags); + n_tty_set_termios(tty, NULL); + tty_unthrottle(tty); + return 0; +} + +static inline int input_available_p(struct tty_struct *tty, int poll) +{ + struct n_tty_data *ldata = tty->disc_data; + int amt = poll && !TIME_CHAR(tty) && MIN_CHAR(tty) ? MIN_CHAR(tty) : 1; + + if (ldata->icanon && !L_EXTPROC(tty)) + return ldata->canon_head != ldata->read_tail; + else + return ldata->commit_head - ldata->read_tail >= amt; +} + +/** + * copy_from_read_buf - copy read data directly + * @tty: terminal device + * @kbp: data + * @nr: size of data + * + * Helper function to speed up n_tty_read. It is only called when + * ICANON is off; it copies characters straight from the tty queue. + * + * Called under the ldata->atomic_read_lock sem + * + * Returns true if it successfully copied data, but there is still + * more data to be had. + * + * n_tty_read()/consumer path: + * caller holds non-exclusive termios_rwsem + * read_tail published + */ + +static bool copy_from_read_buf(struct tty_struct *tty, + unsigned char **kbp, + size_t *nr) + +{ + struct n_tty_data *ldata = tty->disc_data; + size_t n; + bool is_eof; + size_t head = smp_load_acquire(&ldata->commit_head); + size_t tail = ldata->read_tail & (N_TTY_BUF_SIZE - 1); + + n = min(head - ldata->read_tail, N_TTY_BUF_SIZE - tail); + n = min(*nr, n); + if (n) { + unsigned char *from = read_buf_addr(ldata, tail); + memcpy(*kbp, from, n); + is_eof = n == 1 && *from == EOF_CHAR(tty); + tty_audit_add_data(tty, from, n); + zero_buffer(tty, from, n); + smp_store_release(&ldata->read_tail, ldata->read_tail + n); + /* Turn single EOF into zero-length read */ + if (L_EXTPROC(tty) && ldata->icanon && is_eof && + (head == ldata->read_tail)) + return false; + *kbp += n; + *nr -= n; + + /* If we have more to copy, let the caller know */ + return head != ldata->read_tail; + } + return false; +} + +/** + * canon_copy_from_read_buf - copy read data in canonical mode + * @tty: terminal device + * @kbp: data + * @nr: size of data + * + * Helper function for n_tty_read. It is only called when ICANON is on; + * it copies one line of input up to and including the line-delimiting + * character into the result buffer. + * + * NB: When termios is changed from non-canonical to canonical mode and + * the read buffer contains data, n_tty_set_termios() simulates an EOF + * push (as if C-d were input) _without_ the DISABLED_CHAR in the buffer. + * This causes data already processed as input to be immediately available + * as input although a newline has not been received. + * + * Called under the atomic_read_lock mutex + * + * n_tty_read()/consumer path: + * caller holds non-exclusive termios_rwsem + * read_tail published + */ + +static bool canon_copy_from_read_buf(struct tty_struct *tty, + unsigned char **kbp, + size_t *nr) +{ + struct n_tty_data *ldata = tty->disc_data; + size_t n, size, more, c; + size_t eol; + size_t tail, canon_head; + int found = 0; + + /* N.B. avoid overrun if nr == 0 */ + if (!*nr) + return false; + + canon_head = smp_load_acquire(&ldata->canon_head); + n = min(*nr, canon_head - ldata->read_tail); + + tail = ldata->read_tail & (N_TTY_BUF_SIZE - 1); + size = min_t(size_t, tail + n, N_TTY_BUF_SIZE); + + n_tty_trace("%s: nr:%zu tail:%zu n:%zu size:%zu\n", + __func__, *nr, tail, n, size); + + eol = find_next_bit(ldata->read_flags, size, tail); + more = n - (size - tail); + if (eol == N_TTY_BUF_SIZE && more) { + /* scan wrapped without finding set bit */ + eol = find_next_bit(ldata->read_flags, more, 0); + found = eol != more; + } else + found = eol != size; + + n = eol - tail; + if (n > N_TTY_BUF_SIZE) + n += N_TTY_BUF_SIZE; + c = n + found; + + if (!found || read_buf(ldata, eol) != __DISABLED_CHAR) + n = c; + + n_tty_trace("%s: eol:%zu found:%d n:%zu c:%zu tail:%zu more:%zu\n", + __func__, eol, found, n, c, tail, more); + + tty_copy(tty, *kbp, tail, n); + *kbp += n; + *nr -= n; + + if (found) + clear_bit(eol, ldata->read_flags); + smp_store_release(&ldata->read_tail, ldata->read_tail + c); + + if (found) { + if (!ldata->push) + ldata->line_start = ldata->read_tail; + else + ldata->push = 0; + tty_audit_push(); + return false; + } + + /* No EOL found - do a continuation retry if there is more data */ + return ldata->read_tail != canon_head; +} + +/* + * If we finished a read at the exact location of an + * EOF (special EOL character that's a __DISABLED_CHAR) + * in the stream, silently eat the EOF. + */ +static void canon_skip_eof(struct tty_struct *tty) +{ + struct n_tty_data *ldata = tty->disc_data; + size_t tail, canon_head; + + canon_head = smp_load_acquire(&ldata->canon_head); + tail = ldata->read_tail; + + // No data? + if (tail == canon_head) + return; + + // See if the tail position is EOF in the circular buffer + tail &= (N_TTY_BUF_SIZE - 1); + if (!test_bit(tail, ldata->read_flags)) + return; + if (read_buf(ldata, tail) != __DISABLED_CHAR) + return; + + // Clear the EOL bit, skip the EOF char. + clear_bit(tail, ldata->read_flags); + smp_store_release(&ldata->read_tail, ldata->read_tail + 1); +} + +/** + * job_control - check job control + * @tty: tty + * @file: file handle + * + * Perform job control management checks on this file/tty descriptor + * and if appropriate send any needed signals and return a negative + * error code if action should be taken. + * + * Locking: redirected write test is safe + * current->signal->tty check is safe + * ctrl_lock to safely reference tty->pgrp + */ + +static int job_control(struct tty_struct *tty, struct file *file) +{ + /* Job control check -- must be done at start and after + every sleep (POSIX.1 7.1.1.4). */ + /* NOTE: not yet done after every sleep pending a thorough + check of the logic of this change. -- jlc */ + /* don't stop on /dev/console */ + if (file->f_op->write_iter == redirected_tty_write) + return 0; + + return __tty_check_change(tty, SIGTTIN); +} + + +/** + * n_tty_read - read function for tty + * @tty: tty device + * @file: file object + * @buf: userspace buffer pointer + * @nr: size of I/O + * + * Perform reads for the line discipline. We are guaranteed that the + * line discipline will not be closed under us but we may get multiple + * parallel readers and must handle this ourselves. We may also get + * a hangup. Always called in user context, may sleep. + * + * This code must be sure never to sleep through a hangup. + * + * n_tty_read()/consumer path: + * claims non-exclusive termios_rwsem + * publishes read_tail + */ + +static ssize_t n_tty_read(struct tty_struct *tty, struct file *file, + unsigned char *kbuf, size_t nr, + void **cookie, unsigned long offset) +{ + struct n_tty_data *ldata = tty->disc_data; + unsigned char *kb = kbuf; + DEFINE_WAIT_FUNC(wait, woken_wake_function); + int c; + int minimum, time; + ssize_t retval = 0; + long timeout; + int packet; + size_t tail; + + /* + * Is this a continuation of a read started earler? + * + * If so, we still hold the atomic_read_lock and the + * termios_rwsem, and can just continue to copy data. + */ + if (*cookie) { + if (ldata->icanon && !L_EXTPROC(tty)) { + /* + * If we have filled the user buffer, see + * if we should skip an EOF character before + * releasing the lock and returning done. + */ + if (!nr) + canon_skip_eof(tty); + else if (canon_copy_from_read_buf(tty, &kb, &nr)) + return kb - kbuf; + } else { + if (copy_from_read_buf(tty, &kb, &nr)) + return kb - kbuf; + } + + /* No more data - release locks and stop retries */ + n_tty_kick_worker(tty); + n_tty_check_unthrottle(tty); + up_read(&tty->termios_rwsem); + mutex_unlock(&ldata->atomic_read_lock); + *cookie = NULL; + return kb - kbuf; + } + + c = job_control(tty, file); + if (c < 0) + return c; + + /* + * Internal serialization of reads. + */ + if (file->f_flags & O_NONBLOCK) { + if (!mutex_trylock(&ldata->atomic_read_lock)) + return -EAGAIN; + } else { + if (mutex_lock_interruptible(&ldata->atomic_read_lock)) + return -ERESTARTSYS; + } + + down_read(&tty->termios_rwsem); + + minimum = time = 0; + timeout = MAX_SCHEDULE_TIMEOUT; + if (!ldata->icanon) { + minimum = MIN_CHAR(tty); + if (minimum) { + time = (HZ / 10) * TIME_CHAR(tty); + } else { + timeout = (HZ / 10) * TIME_CHAR(tty); + minimum = 1; + } + } + + packet = tty->packet; + tail = ldata->read_tail; + + add_wait_queue(&tty->read_wait, &wait); + while (nr) { + /* First test for status change. */ + if (packet && tty->link->ctrl_status) { + unsigned char cs; + if (kb != kbuf) + break; + spin_lock_irq(&tty->link->ctrl_lock); + cs = tty->link->ctrl_status; + tty->link->ctrl_status = 0; + spin_unlock_irq(&tty->link->ctrl_lock); + *kb++ = cs; + nr--; + break; + } + + if (!input_available_p(tty, 0)) { + up_read(&tty->termios_rwsem); + tty_buffer_flush_work(tty->port); + down_read(&tty->termios_rwsem); + if (!input_available_p(tty, 0)) { + if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) { + retval = -EIO; + break; + } + if (tty_hung_up_p(file)) + break; + /* + * Abort readers for ttys which never actually + * get hung up. See __tty_hangup(). + */ + if (test_bit(TTY_HUPPING, &tty->flags)) + break; + if (!timeout) + break; + if (tty_io_nonblock(tty, file)) { + retval = -EAGAIN; + break; + } + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } + up_read(&tty->termios_rwsem); + + timeout = wait_woken(&wait, TASK_INTERRUPTIBLE, + timeout); + + down_read(&tty->termios_rwsem); + continue; + } + } + + if (ldata->icanon && !L_EXTPROC(tty)) { + if (canon_copy_from_read_buf(tty, &kb, &nr)) + goto more_to_be_read; + } else { + /* Deal with packet mode. */ + if (packet && kb == kbuf) { + *kb++ = TIOCPKT_DATA; + nr--; + } + + /* + * Copy data, and if there is more to be had + * and we have nothing more to wait for, then + * let's mark us for retries. + * + * NOTE! We return here with both the termios_sem + * and atomic_read_lock still held, the retries + * will release them when done. + */ + if (copy_from_read_buf(tty, &kb, &nr) && kb - kbuf >= minimum) { +more_to_be_read: + remove_wait_queue(&tty->read_wait, &wait); + *cookie = cookie; + return kb - kbuf; + } + } + + n_tty_check_unthrottle(tty); + + if (kb - kbuf >= minimum) + break; + if (time) + timeout = time; + } + if (tail != ldata->read_tail) + n_tty_kick_worker(tty); + up_read(&tty->termios_rwsem); + + remove_wait_queue(&tty->read_wait, &wait); + mutex_unlock(&ldata->atomic_read_lock); + + if (kb - kbuf) + retval = kb - kbuf; + + return retval; +} + +/** + * n_tty_write - write function for tty + * @tty: tty device + * @file: file object + * @buf: userspace buffer pointer + * @nr: size of I/O + * + * Write function of the terminal device. This is serialized with + * respect to other write callers but not to termios changes, reads + * and other such events. Since the receive code will echo characters, + * thus calling driver write methods, the output_lock is used in + * the output processing functions called here as well as in the + * echo processing function to protect the column state and space + * left in the buffer. + * + * This code must be sure never to sleep through a hangup. + * + * Locking: output_lock to protect column state and space left + * (note that the process_output*() functions take this + * lock themselves) + */ + +static ssize_t n_tty_write(struct tty_struct *tty, struct file *file, + const unsigned char *buf, size_t nr) +{ + const unsigned char *b = buf; + DEFINE_WAIT_FUNC(wait, woken_wake_function); + int c; + ssize_t retval = 0; + + /* Job control check -- must be done at start (POSIX.1 7.1.1.4). */ + if (L_TOSTOP(tty) && file->f_op->write_iter != redirected_tty_write) { + retval = tty_check_change(tty); + if (retval) + return retval; + } + + down_read(&tty->termios_rwsem); + + /* Write out any echoed characters that are still pending */ + process_echoes(tty); + + add_wait_queue(&tty->write_wait, &wait); + while (1) { + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } + if (tty_hung_up_p(file) || (tty->link && !tty->link->count)) { + retval = -EIO; + break; + } + if (O_OPOST(tty)) { + while (nr > 0) { + ssize_t num = process_output_block(tty, b, nr); + if (num < 0) { + if (num == -EAGAIN) + break; + retval = num; + goto break_out; + } + b += num; + nr -= num; + if (nr == 0) + break; + c = *b; + if (process_output(c, tty) < 0) + break; + b++; nr--; + } + if (tty->ops->flush_chars) + tty->ops->flush_chars(tty); + } else { + struct n_tty_data *ldata = tty->disc_data; + + while (nr > 0) { + mutex_lock(&ldata->output_lock); + c = tty->ops->write(tty, b, nr); + mutex_unlock(&ldata->output_lock); + if (c < 0) { + retval = c; + goto break_out; + } + if (!c) + break; + b += c; + nr -= c; + } + } + if (!nr) + break; + if (tty_io_nonblock(tty, file)) { + retval = -EAGAIN; + break; + } + up_read(&tty->termios_rwsem); + + wait_woken(&wait, TASK_INTERRUPTIBLE, MAX_SCHEDULE_TIMEOUT); + + down_read(&tty->termios_rwsem); + } +break_out: + remove_wait_queue(&tty->write_wait, &wait); + if (nr && tty->fasync) + set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); + up_read(&tty->termios_rwsem); + return (b - buf) ? b - buf : retval; +} + +/** + * n_tty_poll - poll method for N_TTY + * @tty: terminal device + * @file: file accessing it + * @wait: poll table + * + * Called when the line discipline is asked to poll() for data or + * for special events. This code is not serialized with respect to + * other events save open/close. + * + * This code must be sure never to sleep through a hangup. + * Called without the kernel lock held - fine + */ + +static __poll_t n_tty_poll(struct tty_struct *tty, struct file *file, + poll_table *wait) +{ + __poll_t mask = 0; + + poll_wait(file, &tty->read_wait, wait); + poll_wait(file, &tty->write_wait, wait); + if (input_available_p(tty, 1)) + mask |= EPOLLIN | EPOLLRDNORM; + else { + tty_buffer_flush_work(tty->port); + if (input_available_p(tty, 1)) + mask |= EPOLLIN | EPOLLRDNORM; + } + if (tty->packet && tty->link->ctrl_status) + mask |= EPOLLPRI | EPOLLIN | EPOLLRDNORM; + if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) + mask |= EPOLLHUP; + if (tty_hung_up_p(file)) + mask |= EPOLLHUP; + if (tty->ops->write && !tty_is_writelocked(tty) && + tty_chars_in_buffer(tty) < WAKEUP_CHARS && + tty_write_room(tty) > 0) + mask |= EPOLLOUT | EPOLLWRNORM; + return mask; +} + +static unsigned long inq_canon(struct n_tty_data *ldata) +{ + size_t nr, head, tail; + + if (ldata->canon_head == ldata->read_tail) + return 0; + head = ldata->canon_head; + tail = ldata->read_tail; + nr = head - tail; + /* Skip EOF-chars.. */ + while (MASK(head) != MASK(tail)) { + if (test_bit(tail & (N_TTY_BUF_SIZE - 1), ldata->read_flags) && + read_buf(ldata, tail) == __DISABLED_CHAR) + nr--; + tail++; + } + return nr; +} + +static int n_tty_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct n_tty_data *ldata = tty->disc_data; + int retval; + + switch (cmd) { + case TIOCOUTQ: + return put_user(tty_chars_in_buffer(tty), (int __user *) arg); + case TIOCINQ: + down_write(&tty->termios_rwsem); + if (L_ICANON(tty) && !L_EXTPROC(tty)) + retval = inq_canon(ldata); + else + retval = read_cnt(ldata); + up_write(&tty->termios_rwsem); + return put_user(retval, (unsigned int __user *) arg); + default: + return n_tty_ioctl_helper(tty, file, cmd, arg); + } +} + +static struct tty_ldisc_ops n_tty_ops = { + .magic = TTY_LDISC_MAGIC, + .name = "n_tty", + .open = n_tty_open, + .close = n_tty_close, + .flush_buffer = n_tty_flush_buffer, + .read = n_tty_read, + .write = n_tty_write, + .ioctl = n_tty_ioctl, + .set_termios = n_tty_set_termios, + .poll = n_tty_poll, + .receive_buf = n_tty_receive_buf, + .write_wakeup = n_tty_write_wakeup, + .receive_buf2 = n_tty_receive_buf2, +}; + +/** + * n_tty_inherit_ops - inherit N_TTY methods + * @ops: struct tty_ldisc_ops where to save N_TTY methods + * + * Enables a 'subclass' line discipline to 'inherit' N_TTY methods. + */ + +void n_tty_inherit_ops(struct tty_ldisc_ops *ops) +{ + *ops = n_tty_ops; + ops->owner = NULL; + ops->refcount = ops->flags = 0; +} +EXPORT_SYMBOL_GPL(n_tty_inherit_ops); + +void __init n_tty_init(void) +{ + tty_register_ldisc(N_TTY, &n_tty_ops); +} diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c new file mode 100644 index 000000000..6890418a2 --- /dev/null +++ b/drivers/tty/nozomi.c @@ -0,0 +1,1907 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * nozomi.c -- HSDPA driver Broadband Wireless Data Card - Globe Trotter + * + * Written by: Ulf Jakobsson, + * Jan Ã…kerfeldt, + * Stefan Thomasson, + * + * Maintained by: Paul Hardwick (p.hardwick@option.com) + * + * Patches: + * Locking code changes for Vodafone by Sphere Systems Ltd, + * Andrew Bird (ajb@spheresystems.co.uk ) + * & Phil Sanderson + * + * Source has been ported from an implementation made by Filip Aben @ Option + * + * -------------------------------------------------------------------------- + * + * Copyright (c) 2005,2006 Option Wireless Sweden AB + * Copyright (c) 2006 Sphere Systems Ltd + * Copyright (c) 2006 Option Wireless n/v + * All rights Reserved. + * + * -------------------------------------------------------------------------- + */ + +/* Enable this to have a lot of debug printouts */ +#define DEBUG + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + + +#define VERSION_STRING DRIVER_DESC " 2.1d" + +/* Default debug printout level */ +#define NOZOMI_DEBUG_LEVEL 0x00 +static int debug = NOZOMI_DEBUG_LEVEL; +module_param(debug, int, S_IRUGO | S_IWUSR); + +/* Macros definitions */ +#define DBG_(lvl, fmt, args...) \ +do { \ + if (lvl & debug) \ + pr_debug("[%d] %s(): " fmt "\n", \ + __LINE__, __func__, ##args); \ +} while (0) + +#define DBG1(args...) DBG_(0x01, ##args) +#define DBG2(args...) DBG_(0x02, ##args) +#define DBG3(args...) DBG_(0x04, ##args) +#define DBG4(args...) DBG_(0x08, ##args) + +/* TODO: rewrite to optimize macros... */ + +#define TMP_BUF_MAX 256 + +#define DUMP(buf__, len__) \ + do { \ + char tbuf[TMP_BUF_MAX] = {0}; \ + if (len__ > 1) { \ + u32 data_len = min_t(u32, len__, TMP_BUF_MAX); \ + strscpy(tbuf, buf__, data_len); \ + if (tbuf[data_len - 2] == '\r') \ + tbuf[data_len - 2] = 'r'; \ + DBG1("SENDING: '%s' (%d+n)", tbuf, len__); \ + } else { \ + DBG1("SENDING: '%s' (%d)", tbuf, len__); \ + } \ + } while (0) + +/* Defines */ +#define NOZOMI_NAME "nozomi" +#define NOZOMI_NAME_TTY "nozomi_tty" +#define DRIVER_DESC "Nozomi driver" + +#define NTTY_TTY_MAXMINORS 256 +#define NTTY_FIFO_BUFFER_SIZE 8192 + +/* Must be power of 2 */ +#define FIFO_BUFFER_SIZE_UL 8192 + +/* Size of tmp send buffer to card */ +#define SEND_BUF_MAX 1024 +#define RECEIVE_BUF_MAX 4 + + +#define R_IIR 0x0000 /* Interrupt Identity Register */ +#define R_FCR 0x0000 /* Flow Control Register */ +#define R_IER 0x0004 /* Interrupt Enable Register */ + +#define NOZOMI_CONFIG_MAGIC 0xEFEFFEFE +#define TOGGLE_VALID 0x0000 + +/* Definition of interrupt tokens */ +#define MDM_DL1 0x0001 +#define MDM_UL1 0x0002 +#define MDM_DL2 0x0004 +#define MDM_UL2 0x0008 +#define DIAG_DL1 0x0010 +#define DIAG_DL2 0x0020 +#define DIAG_UL 0x0040 +#define APP1_DL 0x0080 +#define APP1_UL 0x0100 +#define APP2_DL 0x0200 +#define APP2_UL 0x0400 +#define CTRL_DL 0x0800 +#define CTRL_UL 0x1000 +#define RESET 0x8000 + +#define MDM_DL (MDM_DL1 | MDM_DL2) +#define MDM_UL (MDM_UL1 | MDM_UL2) +#define DIAG_DL (DIAG_DL1 | DIAG_DL2) + +/* modem signal definition */ +#define CTRL_DSR 0x0001 +#define CTRL_DCD 0x0002 +#define CTRL_RI 0x0004 +#define CTRL_CTS 0x0008 + +#define CTRL_DTR 0x0001 +#define CTRL_RTS 0x0002 + +#define MAX_PORT 4 +#define NOZOMI_MAX_PORTS 5 +#define NOZOMI_MAX_CARDS (NTTY_TTY_MAXMINORS / MAX_PORT) + +/* Type definitions */ + +/* + * There are two types of nozomi cards, + * one with 2048 memory and with 8192 memory + */ +enum card_type { + F32_2 = 2048, /* 512 bytes downlink + uplink * 2 -> 2048 */ + F32_8 = 8192, /* 3072 bytes downl. + 1024 bytes uplink * 2 -> 8192 */ +}; + +/* Initialization states a card can be in */ +enum card_state { + NOZOMI_STATE_UNKNOWN = 0, + NOZOMI_STATE_ENABLED = 1, /* pci device enabled */ + NOZOMI_STATE_ALLOCATED = 2, /* config setup done */ + NOZOMI_STATE_READY = 3, /* flowcontrols received */ +}; + +/* Two different toggle channels exist */ +enum channel_type { + CH_A = 0, + CH_B = 1, +}; + +/* Port definition for the card regarding flow control */ +enum ctrl_port_type { + CTRL_CMD = 0, + CTRL_MDM = 1, + CTRL_DIAG = 2, + CTRL_APP1 = 3, + CTRL_APP2 = 4, + CTRL_ERROR = -1, +}; + +/* Ports that the nozomi has */ +enum port_type { + PORT_MDM = 0, + PORT_DIAG = 1, + PORT_APP1 = 2, + PORT_APP2 = 3, + PORT_CTRL = 4, + PORT_ERROR = -1, +}; + +#ifdef __BIG_ENDIAN +/* Big endian */ + +struct toggles { + unsigned int enabled:5; /* + * Toggle fields are valid if enabled is 0, + * else A-channels must always be used. + */ + unsigned int diag_dl:1; + unsigned int mdm_dl:1; + unsigned int mdm_ul:1; +} __attribute__ ((packed)); + +/* Configuration table to read at startup of card */ +/* Is for now only needed during initialization phase */ +struct config_table { + u32 signature; + u16 product_information; + u16 version; + u8 pad3[3]; + struct toggles toggle; + u8 pad1[4]; + u16 dl_mdm_len1; /* + * If this is 64, it can hold + * 60 bytes + 4 that is length field + */ + u16 dl_start; + + u16 dl_diag_len1; + u16 dl_mdm_len2; /* + * If this is 64, it can hold + * 60 bytes + 4 that is length field + */ + u16 dl_app1_len; + + u16 dl_diag_len2; + u16 dl_ctrl_len; + u16 dl_app2_len; + u8 pad2[16]; + u16 ul_mdm_len1; + u16 ul_start; + u16 ul_diag_len; + u16 ul_mdm_len2; + u16 ul_app1_len; + u16 ul_app2_len; + u16 ul_ctrl_len; +} __attribute__ ((packed)); + +/* This stores all control downlink flags */ +struct ctrl_dl { + u8 port; + unsigned int reserved:4; + unsigned int CTS:1; + unsigned int RI:1; + unsigned int DCD:1; + unsigned int DSR:1; +} __attribute__ ((packed)); + +/* This stores all control uplink flags */ +struct ctrl_ul { + u8 port; + unsigned int reserved:6; + unsigned int RTS:1; + unsigned int DTR:1; +} __attribute__ ((packed)); + +#else +/* Little endian */ + +/* This represents the toggle information */ +struct toggles { + unsigned int mdm_ul:1; + unsigned int mdm_dl:1; + unsigned int diag_dl:1; + unsigned int enabled:5; /* + * Toggle fields are valid if enabled is 0, + * else A-channels must always be used. + */ +} __attribute__ ((packed)); + +/* Configuration table to read at startup of card */ +struct config_table { + u32 signature; + u16 version; + u16 product_information; + struct toggles toggle; + u8 pad1[7]; + u16 dl_start; + u16 dl_mdm_len1; /* + * If this is 64, it can hold + * 60 bytes + 4 that is length field + */ + u16 dl_mdm_len2; + u16 dl_diag_len1; + u16 dl_diag_len2; + u16 dl_app1_len; + u16 dl_app2_len; + u16 dl_ctrl_len; + u8 pad2[16]; + u16 ul_start; + u16 ul_mdm_len2; + u16 ul_mdm_len1; + u16 ul_diag_len; + u16 ul_app1_len; + u16 ul_app2_len; + u16 ul_ctrl_len; +} __attribute__ ((packed)); + +/* This stores all control downlink flags */ +struct ctrl_dl { + unsigned int DSR:1; + unsigned int DCD:1; + unsigned int RI:1; + unsigned int CTS:1; + unsigned int reserved:4; + u8 port; +} __attribute__ ((packed)); + +/* This stores all control uplink flags */ +struct ctrl_ul { + unsigned int DTR:1; + unsigned int RTS:1; + unsigned int reserved:6; + u8 port; +} __attribute__ ((packed)); +#endif + +/* This holds all information that is needed regarding a port */ +struct port { + struct tty_port port; + u8 update_flow_control; + struct ctrl_ul ctrl_ul; + struct ctrl_dl ctrl_dl; + struct kfifo fifo_ul; + void __iomem *dl_addr[2]; + u32 dl_size[2]; + u8 toggle_dl; + void __iomem *ul_addr[2]; + u32 ul_size[2]; + u8 toggle_ul; + u16 token_dl; + + wait_queue_head_t tty_wait; + struct async_icount tty_icount; + + struct nozomi *dc; +}; + +/* Private data one for each card in the system */ +struct nozomi { + void __iomem *base_addr; + unsigned long flip; + + /* Pointers to registers */ + void __iomem *reg_iir; + void __iomem *reg_fcr; + void __iomem *reg_ier; + + u16 last_ier; + enum card_type card_type; + struct config_table config_table; /* Configuration table */ + struct pci_dev *pdev; + struct port port[NOZOMI_MAX_PORTS]; + u8 *send_buf; + + spinlock_t spin_mutex; /* secures access to registers and tty */ + + unsigned int index_start; + enum card_state state; + u32 open_ttys; +}; + +/* This is a data packet that is read or written to/from card */ +struct buffer { + u32 size; /* size is the length of the data buffer */ + u8 *data; +} __attribute__ ((packed)); + +/* Global variables */ +static const struct pci_device_id nozomi_pci_tbl[] = { + {PCI_DEVICE(0x1931, 0x000c)}, /* Nozomi HSDPA */ + {}, +}; + +MODULE_DEVICE_TABLE(pci, nozomi_pci_tbl); + +static struct nozomi *ndevs[NOZOMI_MAX_CARDS]; +static struct tty_driver *ntty_driver; + +static const struct tty_port_operations noz_tty_port_ops; + +/* + * find card by tty_index + */ +static inline struct nozomi *get_dc_by_tty(const struct tty_struct *tty) +{ + return tty ? ndevs[tty->index / MAX_PORT] : NULL; +} + +static inline struct port *get_port_by_tty(const struct tty_struct *tty) +{ + struct nozomi *ndev = get_dc_by_tty(tty); + return ndev ? &ndev->port[tty->index % MAX_PORT] : NULL; +} + +/* + * TODO: + * -Optimize + * -Rewrite cleaner + */ + +static void read_mem32(u32 *buf, const void __iomem *mem_addr_start, + u32 size_bytes) +{ + u32 i = 0; + const u32 __iomem *ptr = mem_addr_start; + u16 *buf16; + + if (unlikely(!ptr || !buf)) + goto out; + + /* shortcut for extremely often used cases */ + switch (size_bytes) { + case 2: /* 2 bytes */ + buf16 = (u16 *) buf; + *buf16 = __le16_to_cpu(readw(ptr)); + goto out; + break; + case 4: /* 4 bytes */ + *(buf) = __le32_to_cpu(readl(ptr)); + goto out; + break; + } + + while (i < size_bytes) { + if (size_bytes - i == 2) { + /* Handle 2 bytes in the end */ + buf16 = (u16 *) buf; + *(buf16) = __le16_to_cpu(readw(ptr)); + i += 2; + } else { + /* Read 4 bytes */ + *(buf) = __le32_to_cpu(readl(ptr)); + i += 4; + } + buf++; + ptr++; + } +out: + return; +} + +/* + * TODO: + * -Optimize + * -Rewrite cleaner + */ +static u32 write_mem32(void __iomem *mem_addr_start, const u32 *buf, + u32 size_bytes) +{ + u32 i = 0; + u32 __iomem *ptr = mem_addr_start; + const u16 *buf16; + + if (unlikely(!ptr || !buf)) + return 0; + + /* shortcut for extremely often used cases */ + switch (size_bytes) { + case 2: /* 2 bytes */ + buf16 = (const u16 *)buf; + writew(__cpu_to_le16(*buf16), ptr); + return 2; + break; + case 1: /* + * also needs to write 4 bytes in this case + * so falling through.. + */ + case 4: /* 4 bytes */ + writel(__cpu_to_le32(*buf), ptr); + return 4; + break; + } + + while (i < size_bytes) { + if (size_bytes - i == 2) { + /* 2 bytes */ + buf16 = (const u16 *)buf; + writew(__cpu_to_le16(*buf16), ptr); + i += 2; + } else { + /* 4 bytes */ + writel(__cpu_to_le32(*buf), ptr); + i += 4; + } + buf++; + ptr++; + } + return i; +} + +/* Setup pointers to different channels and also setup buffer sizes. */ +static void nozomi_setup_memory(struct nozomi *dc) +{ + void __iomem *offset = dc->base_addr + dc->config_table.dl_start; + /* The length reported is including the length field of 4 bytes, + * hence subtract with 4. + */ + const u16 buff_offset = 4; + + /* Modem port dl configuration */ + dc->port[PORT_MDM].dl_addr[CH_A] = offset; + dc->port[PORT_MDM].dl_addr[CH_B] = + (offset += dc->config_table.dl_mdm_len1); + dc->port[PORT_MDM].dl_size[CH_A] = + dc->config_table.dl_mdm_len1 - buff_offset; + dc->port[PORT_MDM].dl_size[CH_B] = + dc->config_table.dl_mdm_len2 - buff_offset; + + /* Diag port dl configuration */ + dc->port[PORT_DIAG].dl_addr[CH_A] = + (offset += dc->config_table.dl_mdm_len2); + dc->port[PORT_DIAG].dl_size[CH_A] = + dc->config_table.dl_diag_len1 - buff_offset; + dc->port[PORT_DIAG].dl_addr[CH_B] = + (offset += dc->config_table.dl_diag_len1); + dc->port[PORT_DIAG].dl_size[CH_B] = + dc->config_table.dl_diag_len2 - buff_offset; + + /* App1 port dl configuration */ + dc->port[PORT_APP1].dl_addr[CH_A] = + (offset += dc->config_table.dl_diag_len2); + dc->port[PORT_APP1].dl_size[CH_A] = + dc->config_table.dl_app1_len - buff_offset; + + /* App2 port dl configuration */ + dc->port[PORT_APP2].dl_addr[CH_A] = + (offset += dc->config_table.dl_app1_len); + dc->port[PORT_APP2].dl_size[CH_A] = + dc->config_table.dl_app2_len - buff_offset; + + /* Ctrl dl configuration */ + dc->port[PORT_CTRL].dl_addr[CH_A] = + (offset += dc->config_table.dl_app2_len); + dc->port[PORT_CTRL].dl_size[CH_A] = + dc->config_table.dl_ctrl_len - buff_offset; + + offset = dc->base_addr + dc->config_table.ul_start; + + /* Modem Port ul configuration */ + dc->port[PORT_MDM].ul_addr[CH_A] = offset; + dc->port[PORT_MDM].ul_size[CH_A] = + dc->config_table.ul_mdm_len1 - buff_offset; + dc->port[PORT_MDM].ul_addr[CH_B] = + (offset += dc->config_table.ul_mdm_len1); + dc->port[PORT_MDM].ul_size[CH_B] = + dc->config_table.ul_mdm_len2 - buff_offset; + + /* Diag port ul configuration */ + dc->port[PORT_DIAG].ul_addr[CH_A] = + (offset += dc->config_table.ul_mdm_len2); + dc->port[PORT_DIAG].ul_size[CH_A] = + dc->config_table.ul_diag_len - buff_offset; + + /* App1 port ul configuration */ + dc->port[PORT_APP1].ul_addr[CH_A] = + (offset += dc->config_table.ul_diag_len); + dc->port[PORT_APP1].ul_size[CH_A] = + dc->config_table.ul_app1_len - buff_offset; + + /* App2 port ul configuration */ + dc->port[PORT_APP2].ul_addr[CH_A] = + (offset += dc->config_table.ul_app1_len); + dc->port[PORT_APP2].ul_size[CH_A] = + dc->config_table.ul_app2_len - buff_offset; + + /* Ctrl ul configuration */ + dc->port[PORT_CTRL].ul_addr[CH_A] = + (offset += dc->config_table.ul_app2_len); + dc->port[PORT_CTRL].ul_size[CH_A] = + dc->config_table.ul_ctrl_len - buff_offset; +} + +/* Dump config table under initalization phase */ +#ifdef DEBUG +static void dump_table(const struct nozomi *dc) +{ + DBG3("signature: 0x%08X", dc->config_table.signature); + DBG3("version: 0x%04X", dc->config_table.version); + DBG3("product_information: 0x%04X", \ + dc->config_table.product_information); + DBG3("toggle enabled: %d", dc->config_table.toggle.enabled); + DBG3("toggle up_mdm: %d", dc->config_table.toggle.mdm_ul); + DBG3("toggle dl_mdm: %d", dc->config_table.toggle.mdm_dl); + DBG3("toggle dl_dbg: %d", dc->config_table.toggle.diag_dl); + + DBG3("dl_start: 0x%04X", dc->config_table.dl_start); + DBG3("dl_mdm_len0: 0x%04X, %d", dc->config_table.dl_mdm_len1, + dc->config_table.dl_mdm_len1); + DBG3("dl_mdm_len1: 0x%04X, %d", dc->config_table.dl_mdm_len2, + dc->config_table.dl_mdm_len2); + DBG3("dl_diag_len0: 0x%04X, %d", dc->config_table.dl_diag_len1, + dc->config_table.dl_diag_len1); + DBG3("dl_diag_len1: 0x%04X, %d", dc->config_table.dl_diag_len2, + dc->config_table.dl_diag_len2); + DBG3("dl_app1_len: 0x%04X, %d", dc->config_table.dl_app1_len, + dc->config_table.dl_app1_len); + DBG3("dl_app2_len: 0x%04X, %d", dc->config_table.dl_app2_len, + dc->config_table.dl_app2_len); + DBG3("dl_ctrl_len: 0x%04X, %d", dc->config_table.dl_ctrl_len, + dc->config_table.dl_ctrl_len); + DBG3("ul_start: 0x%04X, %d", dc->config_table.ul_start, + dc->config_table.ul_start); + DBG3("ul_mdm_len[0]: 0x%04X, %d", dc->config_table.ul_mdm_len1, + dc->config_table.ul_mdm_len1); + DBG3("ul_mdm_len[1]: 0x%04X, %d", dc->config_table.ul_mdm_len2, + dc->config_table.ul_mdm_len2); + DBG3("ul_diag_len: 0x%04X, %d", dc->config_table.ul_diag_len, + dc->config_table.ul_diag_len); + DBG3("ul_app1_len: 0x%04X, %d", dc->config_table.ul_app1_len, + dc->config_table.ul_app1_len); + DBG3("ul_app2_len: 0x%04X, %d", dc->config_table.ul_app2_len, + dc->config_table.ul_app2_len); + DBG3("ul_ctrl_len: 0x%04X, %d", dc->config_table.ul_ctrl_len, + dc->config_table.ul_ctrl_len); +} +#else +static inline void dump_table(const struct nozomi *dc) { } +#endif + +/* + * Read configuration table from card under intalization phase + * Returns 1 if ok, else 0 + */ +static int nozomi_read_config_table(struct nozomi *dc) +{ + read_mem32((u32 *) &dc->config_table, dc->base_addr + 0, + sizeof(struct config_table)); + + if (dc->config_table.signature != NOZOMI_CONFIG_MAGIC) { + dev_err(&dc->pdev->dev, "ConfigTable Bad! 0x%08X != 0x%08X\n", + dc->config_table.signature, NOZOMI_CONFIG_MAGIC); + return 0; + } + + if ((dc->config_table.version == 0) + || (dc->config_table.toggle.enabled == TOGGLE_VALID)) { + int i; + DBG1("Second phase, configuring card"); + + nozomi_setup_memory(dc); + + dc->port[PORT_MDM].toggle_ul = dc->config_table.toggle.mdm_ul; + dc->port[PORT_MDM].toggle_dl = dc->config_table.toggle.mdm_dl; + dc->port[PORT_DIAG].toggle_dl = dc->config_table.toggle.diag_dl; + DBG1("toggle ports: MDM UL:%d MDM DL:%d, DIAG DL:%d", + dc->port[PORT_MDM].toggle_ul, + dc->port[PORT_MDM].toggle_dl, dc->port[PORT_DIAG].toggle_dl); + + dump_table(dc); + + for (i = PORT_MDM; i < MAX_PORT; i++) { + memset(&dc->port[i].ctrl_dl, 0, sizeof(struct ctrl_dl)); + memset(&dc->port[i].ctrl_ul, 0, sizeof(struct ctrl_ul)); + } + + /* Enable control channel */ + dc->last_ier = dc->last_ier | CTRL_DL; + writew(dc->last_ier, dc->reg_ier); + + dc->state = NOZOMI_STATE_ALLOCATED; + dev_info(&dc->pdev->dev, "Initialization OK!\n"); + return 1; + } + + if ((dc->config_table.version > 0) + && (dc->config_table.toggle.enabled != TOGGLE_VALID)) { + u32 offset = 0; + DBG1("First phase: pushing upload buffers, clearing download"); + + dev_info(&dc->pdev->dev, "Version of card: %d\n", + dc->config_table.version); + + /* Here we should disable all I/O over F32. */ + nozomi_setup_memory(dc); + + /* + * We should send ALL channel pair tokens back along + * with reset token + */ + + /* push upload modem buffers */ + write_mem32(dc->port[PORT_MDM].ul_addr[CH_A], + (u32 *) &offset, 4); + write_mem32(dc->port[PORT_MDM].ul_addr[CH_B], + (u32 *) &offset, 4); + + writew(MDM_UL | DIAG_DL | MDM_DL, dc->reg_fcr); + + DBG1("First phase done"); + } + + return 1; +} + +/* Enable uplink interrupts */ +static void enable_transmit_ul(enum port_type port, struct nozomi *dc) +{ + static const u16 mask[] = {MDM_UL, DIAG_UL, APP1_UL, APP2_UL, CTRL_UL}; + + if (port < NOZOMI_MAX_PORTS) { + dc->last_ier |= mask[port]; + writew(dc->last_ier, dc->reg_ier); + } else { + dev_err(&dc->pdev->dev, "Called with wrong port?\n"); + } +} + +/* Disable uplink interrupts */ +static void disable_transmit_ul(enum port_type port, struct nozomi *dc) +{ + static const u16 mask[] = + {~MDM_UL, ~DIAG_UL, ~APP1_UL, ~APP2_UL, ~CTRL_UL}; + + if (port < NOZOMI_MAX_PORTS) { + dc->last_ier &= mask[port]; + writew(dc->last_ier, dc->reg_ier); + } else { + dev_err(&dc->pdev->dev, "Called with wrong port?\n"); + } +} + +/* Enable downlink interrupts */ +static void enable_transmit_dl(enum port_type port, struct nozomi *dc) +{ + static const u16 mask[] = {MDM_DL, DIAG_DL, APP1_DL, APP2_DL, CTRL_DL}; + + if (port < NOZOMI_MAX_PORTS) { + dc->last_ier |= mask[port]; + writew(dc->last_ier, dc->reg_ier); + } else { + dev_err(&dc->pdev->dev, "Called with wrong port?\n"); + } +} + +/* Disable downlink interrupts */ +static void disable_transmit_dl(enum port_type port, struct nozomi *dc) +{ + static const u16 mask[] = + {~MDM_DL, ~DIAG_DL, ~APP1_DL, ~APP2_DL, ~CTRL_DL}; + + if (port < NOZOMI_MAX_PORTS) { + dc->last_ier &= mask[port]; + writew(dc->last_ier, dc->reg_ier); + } else { + dev_err(&dc->pdev->dev, "Called with wrong port?\n"); + } +} + +/* + * Return 1 - send buffer to card and ack. + * Return 0 - don't ack, don't send buffer to card. + */ +static int send_data(enum port_type index, struct nozomi *dc) +{ + u32 size = 0; + struct port *port = &dc->port[index]; + const u8 toggle = port->toggle_ul; + void __iomem *addr = port->ul_addr[toggle]; + const u32 ul_size = port->ul_size[toggle]; + + /* Get data from tty and place in buf for now */ + size = kfifo_out(&port->fifo_ul, dc->send_buf, + ul_size < SEND_BUF_MAX ? ul_size : SEND_BUF_MAX); + + if (size == 0) { + DBG4("No more data to send, disable link:"); + return 0; + } + + /* DUMP(buf, size); */ + + /* Write length + data */ + write_mem32(addr, (u32 *) &size, 4); + write_mem32(addr + 4, (u32 *) dc->send_buf, size); + + tty_port_tty_wakeup(&port->port); + + return 1; +} + +/* If all data has been read, return 1, else 0 */ +static int receive_data(enum port_type index, struct nozomi *dc) +{ + u8 buf[RECEIVE_BUF_MAX] = { 0 }; + int size; + u32 offset = 4; + struct port *port = &dc->port[index]; + void __iomem *addr = port->dl_addr[port->toggle_dl]; + struct tty_struct *tty = tty_port_tty_get(&port->port); + int i, ret; + + size = __le32_to_cpu(readl(addr)); + /* DBG1( "%d bytes port: %d", size, index); */ + + if (tty && tty_throttled(tty)) { + DBG1("No room in tty, don't read data, don't ack interrupt, " + "disable interrupt"); + + /* disable interrupt in downlink... */ + disable_transmit_dl(index, dc); + ret = 0; + goto put; + } + + if (unlikely(size == 0)) { + dev_err(&dc->pdev->dev, "size == 0?\n"); + ret = 1; + goto put; + } + + while (size > 0) { + read_mem32((u32 *) buf, addr + offset, RECEIVE_BUF_MAX); + + if (size == 1) { + tty_insert_flip_char(&port->port, buf[0], TTY_NORMAL); + size = 0; + } else if (size < RECEIVE_BUF_MAX) { + size -= tty_insert_flip_string(&port->port, + (char *)buf, size); + } else { + i = tty_insert_flip_string(&port->port, + (char *)buf, RECEIVE_BUF_MAX); + size -= i; + offset += i; + } + } + + set_bit(index, &dc->flip); + ret = 1; +put: + tty_kref_put(tty); + return ret; +} + +/* Debug for interrupts */ +#ifdef DEBUG +static char *interrupt2str(u16 interrupt) +{ + static char buf[TMP_BUF_MAX]; + char *p = buf; + + if (interrupt & MDM_DL1) + p += scnprintf(p, TMP_BUF_MAX, "MDM_DL1 "); + if (interrupt & MDM_DL2) + p += scnprintf(p, TMP_BUF_MAX - (p - buf), "MDM_DL2 "); + if (interrupt & MDM_UL1) + p += scnprintf(p, TMP_BUF_MAX - (p - buf), "MDM_UL1 "); + if (interrupt & MDM_UL2) + p += scnprintf(p, TMP_BUF_MAX - (p - buf), "MDM_UL2 "); + if (interrupt & DIAG_DL1) + p += scnprintf(p, TMP_BUF_MAX - (p - buf), "DIAG_DL1 "); + if (interrupt & DIAG_DL2) + p += scnprintf(p, TMP_BUF_MAX - (p - buf), "DIAG_DL2 "); + + if (interrupt & DIAG_UL) + p += scnprintf(p, TMP_BUF_MAX - (p - buf), "DIAG_UL "); + + if (interrupt & APP1_DL) + p += scnprintf(p, TMP_BUF_MAX - (p - buf), "APP1_DL "); + if (interrupt & APP2_DL) + p += scnprintf(p, TMP_BUF_MAX - (p - buf), "APP2_DL "); + + if (interrupt & APP1_UL) + p += scnprintf(p, TMP_BUF_MAX - (p - buf), "APP1_UL "); + if (interrupt & APP2_UL) + p += scnprintf(p, TMP_BUF_MAX - (p - buf), "APP2_UL "); + + if (interrupt & CTRL_DL) + p += scnprintf(p, TMP_BUF_MAX - (p - buf), "CTRL_DL "); + if (interrupt & CTRL_UL) + p += scnprintf(p, TMP_BUF_MAX - (p - buf), "CTRL_UL "); + + if (interrupt & RESET) + p += scnprintf(p, TMP_BUF_MAX - (p - buf), "RESET "); + + return buf; +} +#endif + +/* + * Receive flow control + * Return 1 - If ok, else 0 + */ +static int receive_flow_control(struct nozomi *dc) +{ + enum port_type port = PORT_MDM; + struct ctrl_dl ctrl_dl; + struct ctrl_dl old_ctrl; + u16 enable_ier = 0; + + read_mem32((u32 *) &ctrl_dl, dc->port[PORT_CTRL].dl_addr[CH_A], 2); + + switch (ctrl_dl.port) { + case CTRL_CMD: + DBG1("The Base Band sends this value as a response to a " + "request for IMSI detach sent over the control " + "channel uplink (see section 7.6.1)."); + break; + case CTRL_MDM: + port = PORT_MDM; + enable_ier = MDM_DL; + break; + case CTRL_DIAG: + port = PORT_DIAG; + enable_ier = DIAG_DL; + break; + case CTRL_APP1: + port = PORT_APP1; + enable_ier = APP1_DL; + break; + case CTRL_APP2: + port = PORT_APP2; + enable_ier = APP2_DL; + if (dc->state == NOZOMI_STATE_ALLOCATED) { + /* + * After card initialization the flow control + * received for APP2 is always the last + */ + dc->state = NOZOMI_STATE_READY; + dev_info(&dc->pdev->dev, "Device READY!\n"); + } + break; + default: + dev_err(&dc->pdev->dev, + "ERROR: flow control received for non-existing port\n"); + return 0; + } + + DBG1("0x%04X->0x%04X", *((u16 *)&dc->port[port].ctrl_dl), + *((u16 *)&ctrl_dl)); + + old_ctrl = dc->port[port].ctrl_dl; + dc->port[port].ctrl_dl = ctrl_dl; + + if (old_ctrl.CTS == 1 && ctrl_dl.CTS == 0) { + DBG1("Disable interrupt (0x%04X) on port: %d", + enable_ier, port); + disable_transmit_ul(port, dc); + + } else if (old_ctrl.CTS == 0 && ctrl_dl.CTS == 1) { + + if (kfifo_len(&dc->port[port].fifo_ul)) { + DBG1("Enable interrupt (0x%04X) on port: %d", + enable_ier, port); + DBG1("Data in buffer [%d], enable transmit! ", + kfifo_len(&dc->port[port].fifo_ul)); + enable_transmit_ul(port, dc); + } else { + DBG1("No data in buffer..."); + } + } + + if (*(u16 *)&old_ctrl == *(u16 *)&ctrl_dl) { + DBG1(" No change in mctrl"); + return 1; + } + /* Update statistics */ + if (old_ctrl.CTS != ctrl_dl.CTS) + dc->port[port].tty_icount.cts++; + if (old_ctrl.DSR != ctrl_dl.DSR) + dc->port[port].tty_icount.dsr++; + if (old_ctrl.RI != ctrl_dl.RI) + dc->port[port].tty_icount.rng++; + if (old_ctrl.DCD != ctrl_dl.DCD) + dc->port[port].tty_icount.dcd++; + + wake_up_interruptible(&dc->port[port].tty_wait); + + DBG1("port: %d DCD(%d), CTS(%d), RI(%d), DSR(%d)", + port, + dc->port[port].tty_icount.dcd, dc->port[port].tty_icount.cts, + dc->port[port].tty_icount.rng, dc->port[port].tty_icount.dsr); + + return 1; +} + +static enum ctrl_port_type port2ctrl(enum port_type port, + const struct nozomi *dc) +{ + switch (port) { + case PORT_MDM: + return CTRL_MDM; + case PORT_DIAG: + return CTRL_DIAG; + case PORT_APP1: + return CTRL_APP1; + case PORT_APP2: + return CTRL_APP2; + default: + dev_err(&dc->pdev->dev, + "ERROR: send flow control " \ + "received for non-existing port\n"); + } + return CTRL_ERROR; +} + +/* + * Send flow control, can only update one channel at a time + * Return 0 - If we have updated all flow control + * Return 1 - If we need to update more flow control, ack current enable more + */ +static int send_flow_control(struct nozomi *dc) +{ + u32 i, more_flow_control_to_be_updated = 0; + u16 *ctrl; + + for (i = PORT_MDM; i < MAX_PORT; i++) { + if (dc->port[i].update_flow_control) { + if (more_flow_control_to_be_updated) { + /* We have more flow control to be updated */ + return 1; + } + dc->port[i].ctrl_ul.port = port2ctrl(i, dc); + ctrl = (u16 *)&dc->port[i].ctrl_ul; + write_mem32(dc->port[PORT_CTRL].ul_addr[0], \ + (u32 *) ctrl, 2); + dc->port[i].update_flow_control = 0; + more_flow_control_to_be_updated = 1; + } + } + return 0; +} + +/* + * Handle downlink data, ports that are handled are modem and diagnostics + * Return 1 - ok + * Return 0 - toggle fields are out of sync + */ +static int handle_data_dl(struct nozomi *dc, enum port_type port, u8 *toggle, + u16 read_iir, u16 mask1, u16 mask2) +{ + if (*toggle == 0 && read_iir & mask1) { + if (receive_data(port, dc)) { + writew(mask1, dc->reg_fcr); + *toggle = !(*toggle); + } + + if (read_iir & mask2) { + if (receive_data(port, dc)) { + writew(mask2, dc->reg_fcr); + *toggle = !(*toggle); + } + } + } else if (*toggle == 1 && read_iir & mask2) { + if (receive_data(port, dc)) { + writew(mask2, dc->reg_fcr); + *toggle = !(*toggle); + } + + if (read_iir & mask1) { + if (receive_data(port, dc)) { + writew(mask1, dc->reg_fcr); + *toggle = !(*toggle); + } + } + } else { + dev_err(&dc->pdev->dev, "port out of sync!, toggle:%d\n", + *toggle); + return 0; + } + return 1; +} + +/* + * Handle uplink data, this is currently for the modem port + * Return 1 - ok + * Return 0 - toggle field are out of sync + */ +static int handle_data_ul(struct nozomi *dc, enum port_type port, u16 read_iir) +{ + u8 *toggle = &(dc->port[port].toggle_ul); + + if (*toggle == 0 && read_iir & MDM_UL1) { + dc->last_ier &= ~MDM_UL; + writew(dc->last_ier, dc->reg_ier); + if (send_data(port, dc)) { + writew(MDM_UL1, dc->reg_fcr); + dc->last_ier = dc->last_ier | MDM_UL; + writew(dc->last_ier, dc->reg_ier); + *toggle = !*toggle; + } + + if (read_iir & MDM_UL2) { + dc->last_ier &= ~MDM_UL; + writew(dc->last_ier, dc->reg_ier); + if (send_data(port, dc)) { + writew(MDM_UL2, dc->reg_fcr); + dc->last_ier = dc->last_ier | MDM_UL; + writew(dc->last_ier, dc->reg_ier); + *toggle = !*toggle; + } + } + + } else if (*toggle == 1 && read_iir & MDM_UL2) { + dc->last_ier &= ~MDM_UL; + writew(dc->last_ier, dc->reg_ier); + if (send_data(port, dc)) { + writew(MDM_UL2, dc->reg_fcr); + dc->last_ier = dc->last_ier | MDM_UL; + writew(dc->last_ier, dc->reg_ier); + *toggle = !*toggle; + } + + if (read_iir & MDM_UL1) { + dc->last_ier &= ~MDM_UL; + writew(dc->last_ier, dc->reg_ier); + if (send_data(port, dc)) { + writew(MDM_UL1, dc->reg_fcr); + dc->last_ier = dc->last_ier | MDM_UL; + writew(dc->last_ier, dc->reg_ier); + *toggle = !*toggle; + } + } + } else { + writew(read_iir & MDM_UL, dc->reg_fcr); + dev_err(&dc->pdev->dev, "port out of sync!\n"); + return 0; + } + return 1; +} + +static irqreturn_t interrupt_handler(int irq, void *dev_id) +{ + struct nozomi *dc = dev_id; + unsigned int a; + u16 read_iir; + + if (!dc) + return IRQ_NONE; + + spin_lock(&dc->spin_mutex); + read_iir = readw(dc->reg_iir); + + /* Card removed */ + if (read_iir == (u16)-1) + goto none; + /* + * Just handle interrupt enabled in IER + * (by masking with dc->last_ier) + */ + read_iir &= dc->last_ier; + + if (read_iir == 0) + goto none; + + + DBG4("%s irq:0x%04X, prev:0x%04X", interrupt2str(read_iir), read_iir, + dc->last_ier); + + if (read_iir & RESET) { + if (unlikely(!nozomi_read_config_table(dc))) { + dc->last_ier = 0x0; + writew(dc->last_ier, dc->reg_ier); + dev_err(&dc->pdev->dev, "Could not read status from " + "card, we should disable interface\n"); + } else { + writew(RESET, dc->reg_fcr); + } + /* No more useful info if this was the reset interrupt. */ + goto exit_handler; + } + if (read_iir & CTRL_UL) { + DBG1("CTRL_UL"); + dc->last_ier &= ~CTRL_UL; + writew(dc->last_ier, dc->reg_ier); + if (send_flow_control(dc)) { + writew(CTRL_UL, dc->reg_fcr); + dc->last_ier = dc->last_ier | CTRL_UL; + writew(dc->last_ier, dc->reg_ier); + } + } + if (read_iir & CTRL_DL) { + receive_flow_control(dc); + writew(CTRL_DL, dc->reg_fcr); + } + if (read_iir & MDM_DL) { + if (!handle_data_dl(dc, PORT_MDM, + &(dc->port[PORT_MDM].toggle_dl), read_iir, + MDM_DL1, MDM_DL2)) { + dev_err(&dc->pdev->dev, "MDM_DL out of sync!\n"); + goto exit_handler; + } + } + if (read_iir & MDM_UL) { + if (!handle_data_ul(dc, PORT_MDM, read_iir)) { + dev_err(&dc->pdev->dev, "MDM_UL out of sync!\n"); + goto exit_handler; + } + } + if (read_iir & DIAG_DL) { + if (!handle_data_dl(dc, PORT_DIAG, + &(dc->port[PORT_DIAG].toggle_dl), read_iir, + DIAG_DL1, DIAG_DL2)) { + dev_err(&dc->pdev->dev, "DIAG_DL out of sync!\n"); + goto exit_handler; + } + } + if (read_iir & DIAG_UL) { + dc->last_ier &= ~DIAG_UL; + writew(dc->last_ier, dc->reg_ier); + if (send_data(PORT_DIAG, dc)) { + writew(DIAG_UL, dc->reg_fcr); + dc->last_ier = dc->last_ier | DIAG_UL; + writew(dc->last_ier, dc->reg_ier); + } + } + if (read_iir & APP1_DL) { + if (receive_data(PORT_APP1, dc)) + writew(APP1_DL, dc->reg_fcr); + } + if (read_iir & APP1_UL) { + dc->last_ier &= ~APP1_UL; + writew(dc->last_ier, dc->reg_ier); + if (send_data(PORT_APP1, dc)) { + writew(APP1_UL, dc->reg_fcr); + dc->last_ier = dc->last_ier | APP1_UL; + writew(dc->last_ier, dc->reg_ier); + } + } + if (read_iir & APP2_DL) { + if (receive_data(PORT_APP2, dc)) + writew(APP2_DL, dc->reg_fcr); + } + if (read_iir & APP2_UL) { + dc->last_ier &= ~APP2_UL; + writew(dc->last_ier, dc->reg_ier); + if (send_data(PORT_APP2, dc)) { + writew(APP2_UL, dc->reg_fcr); + dc->last_ier = dc->last_ier | APP2_UL; + writew(dc->last_ier, dc->reg_ier); + } + } + +exit_handler: + spin_unlock(&dc->spin_mutex); + + for (a = 0; a < NOZOMI_MAX_PORTS; a++) + if (test_and_clear_bit(a, &dc->flip)) + tty_flip_buffer_push(&dc->port[a].port); + + return IRQ_HANDLED; +none: + spin_unlock(&dc->spin_mutex); + return IRQ_NONE; +} + +static void nozomi_get_card_type(struct nozomi *dc) +{ + int i; + u32 size = 0; + + for (i = 0; i < 6; i++) + size += pci_resource_len(dc->pdev, i); + + /* Assume card type F32_8 if no match */ + dc->card_type = size == 2048 ? F32_2 : F32_8; + + dev_info(&dc->pdev->dev, "Card type is: %d\n", dc->card_type); +} + +static void nozomi_setup_private_data(struct nozomi *dc) +{ + void __iomem *offset = dc->base_addr + dc->card_type / 2; + unsigned int i; + + dc->reg_fcr = (void __iomem *)(offset + R_FCR); + dc->reg_iir = (void __iomem *)(offset + R_IIR); + dc->reg_ier = (void __iomem *)(offset + R_IER); + dc->last_ier = 0; + dc->flip = 0; + + dc->port[PORT_MDM].token_dl = MDM_DL; + dc->port[PORT_DIAG].token_dl = DIAG_DL; + dc->port[PORT_APP1].token_dl = APP1_DL; + dc->port[PORT_APP2].token_dl = APP2_DL; + + for (i = 0; i < MAX_PORT; i++) + init_waitqueue_head(&dc->port[i].tty_wait); +} + +static ssize_t card_type_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + const struct nozomi *dc = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", dc->card_type); +} +static DEVICE_ATTR_RO(card_type); + +static ssize_t open_ttys_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + const struct nozomi *dc = dev_get_drvdata(dev); + + return sprintf(buf, "%u\n", dc->open_ttys); +} +static DEVICE_ATTR_RO(open_ttys); + +static void make_sysfs_files(struct nozomi *dc) +{ + if (device_create_file(&dc->pdev->dev, &dev_attr_card_type)) + dev_err(&dc->pdev->dev, + "Could not create sysfs file for card_type\n"); + if (device_create_file(&dc->pdev->dev, &dev_attr_open_ttys)) + dev_err(&dc->pdev->dev, + "Could not create sysfs file for open_ttys\n"); +} + +static void remove_sysfs_files(struct nozomi *dc) +{ + device_remove_file(&dc->pdev->dev, &dev_attr_card_type); + device_remove_file(&dc->pdev->dev, &dev_attr_open_ttys); +} + +/* Allocate memory for one device */ +static int nozomi_card_init(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int ret; + struct nozomi *dc = NULL; + int ndev_idx; + int i; + + dev_dbg(&pdev->dev, "Init, new card found\n"); + + for (ndev_idx = 0; ndev_idx < ARRAY_SIZE(ndevs); ndev_idx++) + if (!ndevs[ndev_idx]) + break; + + if (ndev_idx >= ARRAY_SIZE(ndevs)) { + dev_err(&pdev->dev, "no free tty range for this card left\n"); + ret = -EIO; + goto err; + } + + dc = kzalloc(sizeof(struct nozomi), GFP_KERNEL); + if (unlikely(!dc)) { + dev_err(&pdev->dev, "Could not allocate memory\n"); + ret = -ENOMEM; + goto err_free; + } + + dc->pdev = pdev; + + ret = pci_enable_device(dc->pdev); + if (ret) { + dev_err(&pdev->dev, "Failed to enable PCI Device\n"); + goto err_free; + } + + ret = pci_request_regions(dc->pdev, NOZOMI_NAME); + if (ret) { + dev_err(&pdev->dev, "I/O address 0x%04x already in use\n", + (int) /* nozomi_private.io_addr */ 0); + goto err_disable_device; + } + + /* Find out what card type it is */ + nozomi_get_card_type(dc); + + dc->base_addr = pci_iomap(dc->pdev, 0, dc->card_type); + if (!dc->base_addr) { + dev_err(&pdev->dev, "Unable to map card MMIO\n"); + ret = -ENODEV; + goto err_rel_regs; + } + + dc->send_buf = kmalloc(SEND_BUF_MAX, GFP_KERNEL); + if (!dc->send_buf) { + dev_err(&pdev->dev, "Could not allocate send buffer?\n"); + ret = -ENOMEM; + goto err_free_sbuf; + } + + for (i = PORT_MDM; i < MAX_PORT; i++) { + if (kfifo_alloc(&dc->port[i].fifo_ul, FIFO_BUFFER_SIZE_UL, + GFP_KERNEL)) { + dev_err(&pdev->dev, + "Could not allocate kfifo buffer\n"); + ret = -ENOMEM; + goto err_free_kfifo; + } + } + + spin_lock_init(&dc->spin_mutex); + + nozomi_setup_private_data(dc); + + /* Disable all interrupts */ + dc->last_ier = 0; + writew(dc->last_ier, dc->reg_ier); + + ret = request_irq(pdev->irq, &interrupt_handler, IRQF_SHARED, + NOZOMI_NAME, dc); + if (unlikely(ret)) { + dev_err(&pdev->dev, "can't request irq %d\n", pdev->irq); + goto err_free_all_kfifo; + } + + DBG1("base_addr: %p", dc->base_addr); + + make_sysfs_files(dc); + + dc->index_start = ndev_idx * MAX_PORT; + ndevs[ndev_idx] = dc; + + pci_set_drvdata(pdev, dc); + + /* Enable RESET interrupt */ + dc->last_ier = RESET; + iowrite16(dc->last_ier, dc->reg_ier); + + dc->state = NOZOMI_STATE_ENABLED; + + for (i = 0; i < MAX_PORT; i++) { + struct device *tty_dev; + struct port *port = &dc->port[i]; + port->dc = dc; + tty_port_init(&port->port); + port->port.ops = &noz_tty_port_ops; + tty_dev = tty_port_register_device(&port->port, ntty_driver, + dc->index_start + i, &pdev->dev); + + if (IS_ERR(tty_dev)) { + ret = PTR_ERR(tty_dev); + dev_err(&pdev->dev, "Could not allocate tty?\n"); + tty_port_destroy(&port->port); + goto err_free_tty; + } + } + + return 0; + +err_free_tty: + for (i--; i >= 0; i--) { + tty_unregister_device(ntty_driver, dc->index_start + i); + tty_port_destroy(&dc->port[i].port); + } + free_irq(pdev->irq, dc); +err_free_all_kfifo: + i = MAX_PORT; +err_free_kfifo: + for (i--; i >= PORT_MDM; i--) + kfifo_free(&dc->port[i].fifo_ul); +err_free_sbuf: + kfree(dc->send_buf); + iounmap(dc->base_addr); +err_rel_regs: + pci_release_regions(pdev); +err_disable_device: + pci_disable_device(pdev); +err_free: + kfree(dc); +err: + return ret; +} + +static void tty_exit(struct nozomi *dc) +{ + unsigned int i; + + DBG1(" "); + + for (i = 0; i < MAX_PORT; ++i) + tty_port_tty_hangup(&dc->port[i].port, false); + + /* Racy below - surely should wait for scheduled work to be done or + complete off a hangup method ? */ + while (dc->open_ttys) + msleep(1); + for (i = 0; i < MAX_PORT; ++i) { + tty_unregister_device(ntty_driver, dc->index_start + i); + tty_port_destroy(&dc->port[i].port); + } +} + +/* Deallocate memory for one device */ +static void nozomi_card_exit(struct pci_dev *pdev) +{ + int i; + struct ctrl_ul ctrl; + struct nozomi *dc = pci_get_drvdata(pdev); + + /* Disable all interrupts */ + dc->last_ier = 0; + writew(dc->last_ier, dc->reg_ier); + + tty_exit(dc); + + /* Send 0x0001, command card to resend the reset token. */ + /* This is to get the reset when the module is reloaded. */ + ctrl.port = 0x00; + ctrl.reserved = 0; + ctrl.RTS = 0; + ctrl.DTR = 1; + DBG1("sending flow control 0x%04X", *((u16 *)&ctrl)); + + /* Setup dc->reg addresses to we can use defines here */ + write_mem32(dc->port[PORT_CTRL].ul_addr[0], (u32 *)&ctrl, 2); + writew(CTRL_UL, dc->reg_fcr); /* push the token to the card. */ + + remove_sysfs_files(dc); + + free_irq(pdev->irq, dc); + + for (i = 0; i < MAX_PORT; i++) + kfifo_free(&dc->port[i].fifo_ul); + + kfree(dc->send_buf); + + iounmap(dc->base_addr); + + pci_release_regions(pdev); + + pci_disable_device(pdev); + + ndevs[dc->index_start / MAX_PORT] = NULL; + + kfree(dc); +} + +static void set_rts(const struct tty_struct *tty, int rts) +{ + struct port *port = get_port_by_tty(tty); + + port->ctrl_ul.RTS = rts; + port->update_flow_control = 1; + enable_transmit_ul(PORT_CTRL, get_dc_by_tty(tty)); +} + +static void set_dtr(const struct tty_struct *tty, int dtr) +{ + struct port *port = get_port_by_tty(tty); + + DBG1("SETTING DTR index: %d, dtr: %d", tty->index, dtr); + + port->ctrl_ul.DTR = dtr; + port->update_flow_control = 1; + enable_transmit_ul(PORT_CTRL, get_dc_by_tty(tty)); +} + +/* + * ---------------------------------------------------------------------------- + * TTY code + * ---------------------------------------------------------------------------- + */ + +static int ntty_install(struct tty_driver *driver, struct tty_struct *tty) +{ + struct port *port = get_port_by_tty(tty); + struct nozomi *dc = get_dc_by_tty(tty); + int ret; + if (!port || !dc || dc->state != NOZOMI_STATE_READY) + return -ENODEV; + ret = tty_standard_install(driver, tty); + if (ret == 0) + tty->driver_data = port; + return ret; +} + +static void ntty_cleanup(struct tty_struct *tty) +{ + tty->driver_data = NULL; +} + +static int ntty_activate(struct tty_port *tport, struct tty_struct *tty) +{ + struct port *port = container_of(tport, struct port, port); + struct nozomi *dc = port->dc; + unsigned long flags; + + DBG1("open: %d", port->token_dl); + spin_lock_irqsave(&dc->spin_mutex, flags); + dc->last_ier = dc->last_ier | port->token_dl; + writew(dc->last_ier, dc->reg_ier); + dc->open_ttys++; + spin_unlock_irqrestore(&dc->spin_mutex, flags); + printk("noz: activated %d: %p\n", tty->index, tport); + return 0; +} + +static int ntty_open(struct tty_struct *tty, struct file *filp) +{ + struct port *port = tty->driver_data; + return tty_port_open(&port->port, tty, filp); +} + +static void ntty_shutdown(struct tty_port *tport) +{ + struct port *port = container_of(tport, struct port, port); + struct nozomi *dc = port->dc; + unsigned long flags; + + DBG1("close: %d", port->token_dl); + spin_lock_irqsave(&dc->spin_mutex, flags); + dc->last_ier &= ~(port->token_dl); + writew(dc->last_ier, dc->reg_ier); + dc->open_ttys--; + spin_unlock_irqrestore(&dc->spin_mutex, flags); + printk("noz: shutdown %p\n", tport); +} + +static void ntty_close(struct tty_struct *tty, struct file *filp) +{ + struct port *port = tty->driver_data; + if (port) + tty_port_close(&port->port, tty, filp); +} + +static void ntty_hangup(struct tty_struct *tty) +{ + struct port *port = tty->driver_data; + tty_port_hangup(&port->port); +} + +/* + * called when the userspace process writes to the tty (/dev/noz*). + * Data is inserted into a fifo, which is then read and transferred to the modem. + */ +static int ntty_write(struct tty_struct *tty, const unsigned char *buffer, + int count) +{ + int rval = -EINVAL; + struct nozomi *dc = get_dc_by_tty(tty); + struct port *port = tty->driver_data; + unsigned long flags; + + /* DBG1( "WRITEx: %d, index = %d", count, index); */ + + if (!dc || !port) + return -ENODEV; + + rval = kfifo_in(&port->fifo_ul, (unsigned char *)buffer, count); + + spin_lock_irqsave(&dc->spin_mutex, flags); + /* CTS is only valid on the modem channel */ + if (port == &(dc->port[PORT_MDM])) { + if (port->ctrl_dl.CTS) { + DBG4("Enable interrupt"); + enable_transmit_ul(tty->index % MAX_PORT, dc); + } else { + dev_err(&dc->pdev->dev, + "CTS not active on modem port?\n"); + } + } else { + enable_transmit_ul(tty->index % MAX_PORT, dc); + } + spin_unlock_irqrestore(&dc->spin_mutex, flags); + + return rval; +} + +/* + * Calculate how much is left in device + * This method is called by the upper tty layer. + * #according to sources N_TTY.c it expects a value >= 0 and + * does not check for negative values. + * + * If the port is unplugged report lots of room and let the bits + * dribble away so we don't block anything. + */ +static int ntty_write_room(struct tty_struct *tty) +{ + struct port *port = tty->driver_data; + int room = 4096; + const struct nozomi *dc = get_dc_by_tty(tty); + + if (dc) + room = kfifo_avail(&port->fifo_ul); + + return room; +} + +/* Gets io control parameters */ +static int ntty_tiocmget(struct tty_struct *tty) +{ + const struct port *port = tty->driver_data; + const struct ctrl_dl *ctrl_dl = &port->ctrl_dl; + const struct ctrl_ul *ctrl_ul = &port->ctrl_ul; + + /* Note: these could change under us but it is not clear this + matters if so */ + return (ctrl_ul->RTS ? TIOCM_RTS : 0) + | (ctrl_ul->DTR ? TIOCM_DTR : 0) + | (ctrl_dl->DCD ? TIOCM_CAR : 0) + | (ctrl_dl->RI ? TIOCM_RNG : 0) + | (ctrl_dl->DSR ? TIOCM_DSR : 0) + | (ctrl_dl->CTS ? TIOCM_CTS : 0); +} + +/* Sets io controls parameters */ +static int ntty_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct nozomi *dc = get_dc_by_tty(tty); + unsigned long flags; + + spin_lock_irqsave(&dc->spin_mutex, flags); + if (set & TIOCM_RTS) + set_rts(tty, 1); + else if (clear & TIOCM_RTS) + set_rts(tty, 0); + + if (set & TIOCM_DTR) + set_dtr(tty, 1); + else if (clear & TIOCM_DTR) + set_dtr(tty, 0); + spin_unlock_irqrestore(&dc->spin_mutex, flags); + + return 0; +} + +static int ntty_cflags_changed(struct port *port, unsigned long flags, + struct async_icount *cprev) +{ + const struct async_icount cnow = port->tty_icount; + int ret; + + ret = ((flags & TIOCM_RNG) && (cnow.rng != cprev->rng)) + || ((flags & TIOCM_DSR) && (cnow.dsr != cprev->dsr)) + || ((flags & TIOCM_CD) && (cnow.dcd != cprev->dcd)) + || ((flags & TIOCM_CTS) && (cnow.cts != cprev->cts)); + + *cprev = cnow; + + return ret; +} + +static int ntty_tiocgicount(struct tty_struct *tty, + struct serial_icounter_struct *icount) +{ + struct port *port = tty->driver_data; + const struct async_icount cnow = port->tty_icount; + + icount->cts = cnow.cts; + icount->dsr = cnow.dsr; + icount->rng = cnow.rng; + icount->dcd = cnow.dcd; + icount->rx = cnow.rx; + icount->tx = cnow.tx; + icount->frame = cnow.frame; + icount->overrun = cnow.overrun; + icount->parity = cnow.parity; + icount->brk = cnow.brk; + icount->buf_overrun = cnow.buf_overrun; + return 0; +} + +static int ntty_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct port *port = tty->driver_data; + int rval = -ENOIOCTLCMD; + + DBG1("******** IOCTL, cmd: %d", cmd); + + switch (cmd) { + case TIOCMIWAIT: { + struct async_icount cprev = port->tty_icount; + + rval = wait_event_interruptible(port->tty_wait, + ntty_cflags_changed(port, arg, &cprev)); + break; + } + default: + DBG1("ERR: 0x%08X, %d", cmd, cmd); + break; + } + + return rval; +} + +/* + * Called by the upper tty layer when tty buffers are ready + * to receive data again after a call to throttle. + */ +static void ntty_unthrottle(struct tty_struct *tty) +{ + struct nozomi *dc = get_dc_by_tty(tty); + unsigned long flags; + + DBG1("UNTHROTTLE"); + spin_lock_irqsave(&dc->spin_mutex, flags); + enable_transmit_dl(tty->index % MAX_PORT, dc); + set_rts(tty, 1); + + spin_unlock_irqrestore(&dc->spin_mutex, flags); +} + +/* + * Called by the upper tty layer when the tty buffers are almost full. + * The driver should stop send more data. + */ +static void ntty_throttle(struct tty_struct *tty) +{ + struct nozomi *dc = get_dc_by_tty(tty); + unsigned long flags; + + DBG1("THROTTLE"); + spin_lock_irqsave(&dc->spin_mutex, flags); + set_rts(tty, 0); + spin_unlock_irqrestore(&dc->spin_mutex, flags); +} + +/* Returns number of chars in buffer, called by tty layer */ +static s32 ntty_chars_in_buffer(struct tty_struct *tty) +{ + struct port *port = tty->driver_data; + struct nozomi *dc = get_dc_by_tty(tty); + s32 rval = 0; + + if (unlikely(!dc || !port)) { + goto exit_in_buffer; + } + + rval = kfifo_len(&port->fifo_ul); + +exit_in_buffer: + return rval; +} + +static const struct tty_port_operations noz_tty_port_ops = { + .activate = ntty_activate, + .shutdown = ntty_shutdown, +}; + +static const struct tty_operations tty_ops = { + .ioctl = ntty_ioctl, + .open = ntty_open, + .close = ntty_close, + .hangup = ntty_hangup, + .write = ntty_write, + .write_room = ntty_write_room, + .unthrottle = ntty_unthrottle, + .throttle = ntty_throttle, + .chars_in_buffer = ntty_chars_in_buffer, + .tiocmget = ntty_tiocmget, + .tiocmset = ntty_tiocmset, + .get_icount = ntty_tiocgicount, + .install = ntty_install, + .cleanup = ntty_cleanup, +}; + +/* Module initialization */ +static struct pci_driver nozomi_driver = { + .name = NOZOMI_NAME, + .id_table = nozomi_pci_tbl, + .probe = nozomi_card_init, + .remove = nozomi_card_exit, +}; + +static __init int nozomi_init(void) +{ + int ret; + + printk(KERN_INFO "Initializing %s\n", VERSION_STRING); + + ntty_driver = alloc_tty_driver(NTTY_TTY_MAXMINORS); + if (!ntty_driver) + return -ENOMEM; + + ntty_driver->driver_name = NOZOMI_NAME_TTY; + ntty_driver->name = "noz"; + ntty_driver->major = 0; + ntty_driver->type = TTY_DRIVER_TYPE_SERIAL; + ntty_driver->subtype = SERIAL_TYPE_NORMAL; + ntty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; + ntty_driver->init_termios = tty_std_termios; + ntty_driver->init_termios.c_cflag = B115200 | CS8 | CREAD | \ + HUPCL | CLOCAL; + ntty_driver->init_termios.c_ispeed = 115200; + ntty_driver->init_termios.c_ospeed = 115200; + tty_set_operations(ntty_driver, &tty_ops); + + ret = tty_register_driver(ntty_driver); + if (ret) { + printk(KERN_ERR "Nozomi: failed to register ntty driver\n"); + goto free_tty; + } + + ret = pci_register_driver(&nozomi_driver); + if (ret) { + printk(KERN_ERR "Nozomi: can't register pci driver\n"); + goto unr_tty; + } + + return 0; +unr_tty: + tty_unregister_driver(ntty_driver); +free_tty: + put_tty_driver(ntty_driver); + return ret; +} + +static __exit void nozomi_exit(void) +{ + printk(KERN_INFO "Unloading %s\n", DRIVER_DESC); + pci_unregister_driver(&nozomi_driver); + tty_unregister_driver(ntty_driver); + put_tty_driver(ntty_driver); +} + +module_init(nozomi_init); +module_exit(nozomi_exit); + +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c new file mode 100644 index 000000000..ca3e5a6c1 --- /dev/null +++ b/drivers/tty/pty.c @@ -0,0 +1,959 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 1991, 1992 Linus Torvalds + * + * Added support for a Unix98-style ptmx device. + * -- C. Scott Ananian , 14-Jan-1998 + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "tty.h" + +#undef TTY_DEBUG_HANGUP +#ifdef TTY_DEBUG_HANGUP +# define tty_debug_hangup(tty, f, args...) tty_debug(tty, f, ##args) +#else +# define tty_debug_hangup(tty, f, args...) do {} while (0) +#endif + +#ifdef CONFIG_UNIX98_PTYS +static struct tty_driver *ptm_driver; +static struct tty_driver *pts_driver; +static DEFINE_MUTEX(devpts_mutex); +#endif + +static void pty_close(struct tty_struct *tty, struct file *filp) +{ + BUG_ON(!tty); + if (tty->driver->subtype == PTY_TYPE_MASTER) + WARN_ON(tty->count > 1); + else { + if (tty_io_error(tty)) + return; + if (tty->count > 2) + return; + } + set_bit(TTY_IO_ERROR, &tty->flags); + wake_up_interruptible(&tty->read_wait); + wake_up_interruptible(&tty->write_wait); + spin_lock_irq(&tty->ctrl_lock); + tty->packet = 0; + spin_unlock_irq(&tty->ctrl_lock); + /* Review - krefs on tty_link ?? */ + if (!tty->link) + return; + set_bit(TTY_OTHER_CLOSED, &tty->link->flags); + wake_up_interruptible(&tty->link->read_wait); + wake_up_interruptible(&tty->link->write_wait); + if (tty->driver->subtype == PTY_TYPE_MASTER) { + set_bit(TTY_OTHER_CLOSED, &tty->flags); +#ifdef CONFIG_UNIX98_PTYS + if (tty->driver == ptm_driver) { + mutex_lock(&devpts_mutex); + if (tty->link->driver_data) + devpts_pty_kill(tty->link->driver_data); + mutex_unlock(&devpts_mutex); + } +#endif + tty_vhangup(tty->link); + } +} + +/* + * The unthrottle routine is called by the line discipline to signal + * that it can receive more characters. For PTY's, the TTY_THROTTLED + * flag is always set, to force the line discipline to always call the + * unthrottle routine when there are fewer than TTY_THRESHOLD_UNTHROTTLE + * characters in the queue. This is necessary since each time this + * happens, we need to wake up any sleeping processes that could be + * (1) trying to send data to the pty, or (2) waiting in wait_until_sent() + * for the pty buffer to be drained. + */ +static void pty_unthrottle(struct tty_struct *tty) +{ + tty_wakeup(tty->link); + set_bit(TTY_THROTTLED, &tty->flags); +} + +/** + * pty_write - write to a pty + * @tty: the tty we write from + * @buf: kernel buffer of data + * @c: bytes to write + * + * Our "hardware" write method. Data is coming from the ldisc which + * may be in a non sleeping state. We simply throw this at the other + * end of the link as if we were an IRQ handler receiving stuff for + * the other side of the pty/tty pair. + */ + +static int pty_write(struct tty_struct *tty, const unsigned char *buf, int c) +{ + struct tty_struct *to = tty->link; + + if (tty->stopped || !c) + return 0; + + return tty_insert_flip_string_and_push_buffer(to->port, buf, c); +} + +/** + * pty_write_room - write space + * @tty: tty we are writing from + * + * Report how many bytes the ldisc can send into the queue for + * the other device. + */ + +static int pty_write_room(struct tty_struct *tty) +{ + if (tty->stopped) + return 0; + return tty_buffer_space_avail(tty->link->port); +} + +/** + * pty_chars_in_buffer - characters currently in our tx queue + * @tty: our tty + * + * Report how much we have in the transmit queue. As everything is + * instantly at the other end this is easy to implement. + */ + +static int pty_chars_in_buffer(struct tty_struct *tty) +{ + return 0; +} + +/* Set the lock flag on a pty */ +static int pty_set_lock(struct tty_struct *tty, int __user *arg) +{ + int val; + if (get_user(val, arg)) + return -EFAULT; + if (val) + set_bit(TTY_PTY_LOCK, &tty->flags); + else + clear_bit(TTY_PTY_LOCK, &tty->flags); + return 0; +} + +static int pty_get_lock(struct tty_struct *tty, int __user *arg) +{ + int locked = test_bit(TTY_PTY_LOCK, &tty->flags); + return put_user(locked, arg); +} + +/* Set the packet mode on a pty */ +static int pty_set_pktmode(struct tty_struct *tty, int __user *arg) +{ + int pktmode; + + if (get_user(pktmode, arg)) + return -EFAULT; + + spin_lock_irq(&tty->ctrl_lock); + if (pktmode) { + if (!tty->packet) { + tty->link->ctrl_status = 0; + smp_mb(); + tty->packet = 1; + } + } else + tty->packet = 0; + spin_unlock_irq(&tty->ctrl_lock); + + return 0; +} + +/* Get the packet mode of a pty */ +static int pty_get_pktmode(struct tty_struct *tty, int __user *arg) +{ + int pktmode = tty->packet; + return put_user(pktmode, arg); +} + +/* Send a signal to the slave */ +static int pty_signal(struct tty_struct *tty, int sig) +{ + struct pid *pgrp; + + if (sig != SIGINT && sig != SIGQUIT && sig != SIGTSTP) + return -EINVAL; + + if (tty->link) { + pgrp = tty_get_pgrp(tty->link); + if (pgrp) + kill_pgrp(pgrp, sig, 1); + put_pid(pgrp); + } + return 0; +} + +static void pty_flush_buffer(struct tty_struct *tty) +{ + struct tty_struct *to = tty->link; + + if (!to) + return; + + tty_buffer_flush(to, NULL); + if (to->packet) { + spin_lock_irq(&tty->ctrl_lock); + tty->ctrl_status |= TIOCPKT_FLUSHWRITE; + wake_up_interruptible(&to->read_wait); + spin_unlock_irq(&tty->ctrl_lock); + } +} + +static int pty_open(struct tty_struct *tty, struct file *filp) +{ + if (!tty || !tty->link) + return -ENODEV; + + if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) + goto out; + if (test_bit(TTY_PTY_LOCK, &tty->link->flags)) + goto out; + if (tty->driver->subtype == PTY_TYPE_SLAVE && tty->link->count != 1) + goto out; + + clear_bit(TTY_IO_ERROR, &tty->flags); + clear_bit(TTY_OTHER_CLOSED, &tty->link->flags); + set_bit(TTY_THROTTLED, &tty->flags); + return 0; + +out: + set_bit(TTY_IO_ERROR, &tty->flags); + return -EIO; +} + +static void pty_set_termios(struct tty_struct *tty, + struct ktermios *old_termios) +{ + /* See if packet mode change of state. */ + if (tty->link && tty->link->packet) { + int extproc = (old_termios->c_lflag & EXTPROC) | L_EXTPROC(tty); + int old_flow = ((old_termios->c_iflag & IXON) && + (old_termios->c_cc[VSTOP] == '\023') && + (old_termios->c_cc[VSTART] == '\021')); + int new_flow = (I_IXON(tty) && + STOP_CHAR(tty) == '\023' && + START_CHAR(tty) == '\021'); + if ((old_flow != new_flow) || extproc) { + spin_lock_irq(&tty->ctrl_lock); + if (old_flow != new_flow) { + tty->ctrl_status &= ~(TIOCPKT_DOSTOP | TIOCPKT_NOSTOP); + if (new_flow) + tty->ctrl_status |= TIOCPKT_DOSTOP; + else + tty->ctrl_status |= TIOCPKT_NOSTOP; + } + if (extproc) + tty->ctrl_status |= TIOCPKT_IOCTL; + spin_unlock_irq(&tty->ctrl_lock); + wake_up_interruptible(&tty->link->read_wait); + } + } + + tty->termios.c_cflag &= ~(CSIZE | PARENB); + tty->termios.c_cflag |= (CS8 | CREAD); +} + +/** + * pty_do_resize - resize event + * @tty: tty being resized + * @ws: window size being set. + * + * Update the termios variables and send the necessary signals to + * peform a terminal resize correctly + */ + +static int pty_resize(struct tty_struct *tty, struct winsize *ws) +{ + struct pid *pgrp, *rpgrp; + struct tty_struct *pty = tty->link; + + /* For a PTY we need to lock the tty side */ + mutex_lock(&tty->winsize_mutex); + if (!memcmp(ws, &tty->winsize, sizeof(*ws))) + goto done; + + /* Signal the foreground process group of both ptys */ + pgrp = tty_get_pgrp(tty); + rpgrp = tty_get_pgrp(pty); + + if (pgrp) + kill_pgrp(pgrp, SIGWINCH, 1); + if (rpgrp != pgrp && rpgrp) + kill_pgrp(rpgrp, SIGWINCH, 1); + + put_pid(pgrp); + put_pid(rpgrp); + + tty->winsize = *ws; + pty->winsize = *ws; /* Never used so will go away soon */ +done: + mutex_unlock(&tty->winsize_mutex); + return 0; +} + +/** + * pty_start - start() handler + * pty_stop - stop() handler + * @tty: tty being flow-controlled + * + * Propagates the TIOCPKT status to the master pty. + * + * NB: only the master pty can be in packet mode so only the slave + * needs start()/stop() handlers + */ +static void pty_start(struct tty_struct *tty) +{ + unsigned long flags; + + if (tty->link && tty->link->packet) { + spin_lock_irqsave(&tty->ctrl_lock, flags); + tty->ctrl_status &= ~TIOCPKT_STOP; + tty->ctrl_status |= TIOCPKT_START; + spin_unlock_irqrestore(&tty->ctrl_lock, flags); + wake_up_interruptible_poll(&tty->link->read_wait, EPOLLIN); + } +} + +static void pty_stop(struct tty_struct *tty) +{ + unsigned long flags; + + if (tty->link && tty->link->packet) { + spin_lock_irqsave(&tty->ctrl_lock, flags); + tty->ctrl_status &= ~TIOCPKT_START; + tty->ctrl_status |= TIOCPKT_STOP; + spin_unlock_irqrestore(&tty->ctrl_lock, flags); + wake_up_interruptible_poll(&tty->link->read_wait, EPOLLIN); + } +} + +/** + * pty_common_install - set up the pty pair + * @driver: the pty driver + * @tty: the tty being instantiated + * @legacy: true if this is BSD style + * + * Perform the initial set up for the tty/pty pair. Called from the + * tty layer when the port is first opened. + * + * Locking: the caller must hold the tty_mutex + */ +static int pty_common_install(struct tty_driver *driver, struct tty_struct *tty, + bool legacy) +{ + struct tty_struct *o_tty; + struct tty_port *ports[2]; + int idx = tty->index; + int retval = -ENOMEM; + + /* Opening the slave first has always returned -EIO */ + if (driver->subtype != PTY_TYPE_MASTER) + return -EIO; + + ports[0] = kmalloc(sizeof **ports, GFP_KERNEL); + ports[1] = kmalloc(sizeof **ports, GFP_KERNEL); + if (!ports[0] || !ports[1]) + goto err; + if (!try_module_get(driver->other->owner)) { + /* This cannot in fact currently happen */ + goto err; + } + o_tty = alloc_tty_struct(driver->other, idx); + if (!o_tty) + goto err_put_module; + + tty_set_lock_subclass(o_tty); + lockdep_set_subclass(&o_tty->termios_rwsem, TTY_LOCK_SLAVE); + + if (legacy) { + /* We always use new tty termios data so we can do this + the easy way .. */ + tty_init_termios(tty); + tty_init_termios(o_tty); + + driver->other->ttys[idx] = o_tty; + driver->ttys[idx] = tty; + } else { + memset(&tty->termios_locked, 0, sizeof(tty->termios_locked)); + tty->termios = driver->init_termios; + memset(&o_tty->termios_locked, 0, sizeof(tty->termios_locked)); + o_tty->termios = driver->other->init_termios; + } + + /* + * Everything allocated ... set up the o_tty structure. + */ + tty_driver_kref_get(driver->other); + /* Establish the links in both directions */ + tty->link = o_tty; + o_tty->link = tty; + tty_port_init(ports[0]); + tty_port_init(ports[1]); + tty_buffer_set_limit(ports[0], 8192); + tty_buffer_set_limit(ports[1], 8192); + o_tty->port = ports[0]; + tty->port = ports[1]; + o_tty->port->itty = o_tty; + + tty_buffer_set_lock_subclass(o_tty->port); + + tty_driver_kref_get(driver); + tty->count++; + o_tty->count++; + return 0; + +err_put_module: + module_put(driver->other->owner); +err: + kfree(ports[0]); + kfree(ports[1]); + return retval; +} + +static void pty_cleanup(struct tty_struct *tty) +{ + tty_port_put(tty->port); +} + +/* Traditional BSD devices */ +#ifdef CONFIG_LEGACY_PTYS + +static int pty_install(struct tty_driver *driver, struct tty_struct *tty) +{ + return pty_common_install(driver, tty, true); +} + +static void pty_remove(struct tty_driver *driver, struct tty_struct *tty) +{ + struct tty_struct *pair = tty->link; + driver->ttys[tty->index] = NULL; + if (pair) + pair->driver->ttys[pair->index] = NULL; +} + +static int pty_bsd_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + switch (cmd) { + case TIOCSPTLCK: /* Set PT Lock (disallow slave open) */ + return pty_set_lock(tty, (int __user *) arg); + case TIOCGPTLCK: /* Get PT Lock status */ + return pty_get_lock(tty, (int __user *)arg); + case TIOCPKT: /* Set PT packet mode */ + return pty_set_pktmode(tty, (int __user *)arg); + case TIOCGPKT: /* Get PT packet mode */ + return pty_get_pktmode(tty, (int __user *)arg); + case TIOCSIG: /* Send signal to other side of pty */ + return pty_signal(tty, (int) arg); + case TIOCGPTN: /* TTY returns ENOTTY, but glibc expects EINVAL here */ + return -EINVAL; + } + return -ENOIOCTLCMD; +} + +#ifdef CONFIG_COMPAT +static long pty_bsd_compat_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + /* + * PTY ioctls don't require any special translation between 32-bit and + * 64-bit userspace, they are already compatible. + */ + return pty_bsd_ioctl(tty, cmd, (unsigned long)compat_ptr(arg)); +} +#else +#define pty_bsd_compat_ioctl NULL +#endif + +static int legacy_count = CONFIG_LEGACY_PTY_COUNT; +/* + * not really modular, but the easiest way to keep compat with existing + * bootargs behaviour is to continue using module_param here. + */ +module_param(legacy_count, int, 0); + +/* + * The master side of a pty can do TIOCSPTLCK and thus + * has pty_bsd_ioctl. + */ +static const struct tty_operations master_pty_ops_bsd = { + .install = pty_install, + .open = pty_open, + .close = pty_close, + .write = pty_write, + .write_room = pty_write_room, + .flush_buffer = pty_flush_buffer, + .chars_in_buffer = pty_chars_in_buffer, + .unthrottle = pty_unthrottle, + .ioctl = pty_bsd_ioctl, + .compat_ioctl = pty_bsd_compat_ioctl, + .cleanup = pty_cleanup, + .resize = pty_resize, + .remove = pty_remove +}; + +static const struct tty_operations slave_pty_ops_bsd = { + .install = pty_install, + .open = pty_open, + .close = pty_close, + .write = pty_write, + .write_room = pty_write_room, + .flush_buffer = pty_flush_buffer, + .chars_in_buffer = pty_chars_in_buffer, + .unthrottle = pty_unthrottle, + .set_termios = pty_set_termios, + .cleanup = pty_cleanup, + .resize = pty_resize, + .start = pty_start, + .stop = pty_stop, + .remove = pty_remove +}; + +static void __init legacy_pty_init(void) +{ + struct tty_driver *pty_driver, *pty_slave_driver; + + if (legacy_count <= 0) + return; + + pty_driver = tty_alloc_driver(legacy_count, + TTY_DRIVER_RESET_TERMIOS | + TTY_DRIVER_REAL_RAW | + TTY_DRIVER_DYNAMIC_ALLOC); + if (IS_ERR(pty_driver)) + panic("Couldn't allocate pty driver"); + + pty_slave_driver = tty_alloc_driver(legacy_count, + TTY_DRIVER_RESET_TERMIOS | + TTY_DRIVER_REAL_RAW | + TTY_DRIVER_DYNAMIC_ALLOC); + if (IS_ERR(pty_slave_driver)) + panic("Couldn't allocate pty slave driver"); + + pty_driver->driver_name = "pty_master"; + pty_driver->name = "pty"; + pty_driver->major = PTY_MASTER_MAJOR; + pty_driver->minor_start = 0; + pty_driver->type = TTY_DRIVER_TYPE_PTY; + pty_driver->subtype = PTY_TYPE_MASTER; + pty_driver->init_termios = tty_std_termios; + pty_driver->init_termios.c_iflag = 0; + pty_driver->init_termios.c_oflag = 0; + pty_driver->init_termios.c_cflag = B38400 | CS8 | CREAD; + pty_driver->init_termios.c_lflag = 0; + pty_driver->init_termios.c_ispeed = 38400; + pty_driver->init_termios.c_ospeed = 38400; + pty_driver->other = pty_slave_driver; + tty_set_operations(pty_driver, &master_pty_ops_bsd); + + pty_slave_driver->driver_name = "pty_slave"; + pty_slave_driver->name = "ttyp"; + pty_slave_driver->major = PTY_SLAVE_MAJOR; + pty_slave_driver->minor_start = 0; + pty_slave_driver->type = TTY_DRIVER_TYPE_PTY; + pty_slave_driver->subtype = PTY_TYPE_SLAVE; + pty_slave_driver->init_termios = tty_std_termios; + pty_slave_driver->init_termios.c_cflag = B38400 | CS8 | CREAD; + pty_slave_driver->init_termios.c_ispeed = 38400; + pty_slave_driver->init_termios.c_ospeed = 38400; + pty_slave_driver->other = pty_driver; + tty_set_operations(pty_slave_driver, &slave_pty_ops_bsd); + + if (tty_register_driver(pty_driver)) + panic("Couldn't register pty driver"); + if (tty_register_driver(pty_slave_driver)) + panic("Couldn't register pty slave driver"); +} +#else +static inline void legacy_pty_init(void) { } +#endif + +/* Unix98 devices */ +#ifdef CONFIG_UNIX98_PTYS +static struct cdev ptmx_cdev; + +/** + * ptm_open_peer - open the peer of a pty + * @master: the open struct file of the ptmx device node + * @tty: the master of the pty being opened + * @flags: the flags for open + * + * Provide a race free way for userspace to open the slave end of a pty + * (where they have the master fd and cannot access or trust the mount + * namespace /dev/pts was mounted inside). + */ +int ptm_open_peer(struct file *master, struct tty_struct *tty, int flags) +{ + int fd = -1; + struct file *filp; + int retval = -EINVAL; + struct path path; + + if (tty->driver != ptm_driver) + return -EIO; + + fd = get_unused_fd_flags(flags); + if (fd < 0) { + retval = fd; + goto err; + } + + /* Compute the slave's path */ + path.mnt = devpts_mntget(master, tty->driver_data); + if (IS_ERR(path.mnt)) { + retval = PTR_ERR(path.mnt); + goto err_put; + } + path.dentry = tty->link->driver_data; + + filp = dentry_open(&path, flags, current_cred()); + mntput(path.mnt); + if (IS_ERR(filp)) { + retval = PTR_ERR(filp); + goto err_put; + } + + fd_install(fd, filp); + return fd; + +err_put: + put_unused_fd(fd); +err: + return retval; +} + +static int pty_unix98_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + switch (cmd) { + case TIOCSPTLCK: /* Set PT Lock (disallow slave open) */ + return pty_set_lock(tty, (int __user *)arg); + case TIOCGPTLCK: /* Get PT Lock status */ + return pty_get_lock(tty, (int __user *)arg); + case TIOCPKT: /* Set PT packet mode */ + return pty_set_pktmode(tty, (int __user *)arg); + case TIOCGPKT: /* Get PT packet mode */ + return pty_get_pktmode(tty, (int __user *)arg); + case TIOCGPTN: /* Get PT Number */ + return put_user(tty->index, (unsigned int __user *)arg); + case TIOCSIG: /* Send signal to other side of pty */ + return pty_signal(tty, (int) arg); + } + + return -ENOIOCTLCMD; +} + +#ifdef CONFIG_COMPAT +static long pty_unix98_compat_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + /* + * PTY ioctls don't require any special translation between 32-bit and + * 64-bit userspace, they are already compatible. + */ + return pty_unix98_ioctl(tty, cmd, + cmd == TIOCSIG ? arg : (unsigned long)compat_ptr(arg)); +} +#else +#define pty_unix98_compat_ioctl NULL +#endif + +/** + * ptm_unix98_lookup - find a pty master + * @driver: ptm driver + * @idx: tty index + * + * Look up a pty master device. Called under the tty_mutex for now. + * This provides our locking. + */ + +static struct tty_struct *ptm_unix98_lookup(struct tty_driver *driver, + struct file *file, int idx) +{ + /* Master must be open via /dev/ptmx */ + return ERR_PTR(-EIO); +} + +/** + * pts_unix98_lookup - find a pty slave + * @driver: pts driver + * @idx: tty index + * + * Look up a pty master device. Called under the tty_mutex for now. + * This provides our locking for the tty pointer. + */ + +static struct tty_struct *pts_unix98_lookup(struct tty_driver *driver, + struct file *file, int idx) +{ + struct tty_struct *tty; + + mutex_lock(&devpts_mutex); + tty = devpts_get_priv(file->f_path.dentry); + mutex_unlock(&devpts_mutex); + /* Master must be open before slave */ + if (!tty) + return ERR_PTR(-EIO); + return tty; +} + +static int pty_unix98_install(struct tty_driver *driver, struct tty_struct *tty) +{ + return pty_common_install(driver, tty, false); +} + +/* this is called once with whichever end is closed last */ +static void pty_unix98_remove(struct tty_driver *driver, struct tty_struct *tty) +{ + struct pts_fs_info *fsi; + + if (tty->driver->subtype == PTY_TYPE_MASTER) + fsi = tty->driver_data; + else + fsi = tty->link->driver_data; + + if (fsi) { + devpts_kill_index(fsi, tty->index); + devpts_release(fsi); + } +} + +static void pty_show_fdinfo(struct tty_struct *tty, struct seq_file *m) +{ + seq_printf(m, "tty-index:\t%d\n", tty->index); +} + +static const struct tty_operations ptm_unix98_ops = { + .lookup = ptm_unix98_lookup, + .install = pty_unix98_install, + .remove = pty_unix98_remove, + .open = pty_open, + .close = pty_close, + .write = pty_write, + .write_room = pty_write_room, + .flush_buffer = pty_flush_buffer, + .chars_in_buffer = pty_chars_in_buffer, + .unthrottle = pty_unthrottle, + .ioctl = pty_unix98_ioctl, + .compat_ioctl = pty_unix98_compat_ioctl, + .resize = pty_resize, + .cleanup = pty_cleanup, + .show_fdinfo = pty_show_fdinfo, +}; + +static const struct tty_operations pty_unix98_ops = { + .lookup = pts_unix98_lookup, + .install = pty_unix98_install, + .remove = pty_unix98_remove, + .open = pty_open, + .close = pty_close, + .write = pty_write, + .write_room = pty_write_room, + .flush_buffer = pty_flush_buffer, + .chars_in_buffer = pty_chars_in_buffer, + .unthrottle = pty_unthrottle, + .set_termios = pty_set_termios, + .start = pty_start, + .stop = pty_stop, + .cleanup = pty_cleanup, +}; + +/** + * ptmx_open - open a unix 98 pty master + * @inode: inode of device file + * @filp: file pointer to tty + * + * Allocate a unix98 pty master device from the ptmx driver. + * + * Locking: tty_mutex protects the init_dev work. tty->count should + * protect the rest. + * allocated_ptys_lock handles the list of free pty numbers + */ + +static int ptmx_open(struct inode *inode, struct file *filp) +{ + struct pts_fs_info *fsi; + struct tty_struct *tty; + struct dentry *dentry; + int retval; + int index; + + nonseekable_open(inode, filp); + + /* We refuse fsnotify events on ptmx, since it's a shared resource */ + filp->f_mode |= FMODE_NONOTIFY; + + retval = tty_alloc_file(filp); + if (retval) + return retval; + + fsi = devpts_acquire(filp); + if (IS_ERR(fsi)) { + retval = PTR_ERR(fsi); + goto out_free_file; + } + + /* find a device that is not in use. */ + mutex_lock(&devpts_mutex); + index = devpts_new_index(fsi); + mutex_unlock(&devpts_mutex); + + retval = index; + if (index < 0) + goto out_put_fsi; + + + mutex_lock(&tty_mutex); + tty = tty_init_dev(ptm_driver, index); + /* The tty returned here is locked so we can safely + drop the mutex */ + mutex_unlock(&tty_mutex); + + retval = PTR_ERR(tty); + if (IS_ERR(tty)) + goto out; + + /* + * From here on out, the tty is "live", and the index and + * fsi will be killed/put by the tty_release() + */ + set_bit(TTY_PTY_LOCK, &tty->flags); /* LOCK THE SLAVE */ + tty->driver_data = fsi; + + tty_add_file(tty, filp); + + dentry = devpts_pty_new(fsi, index, tty->link); + if (IS_ERR(dentry)) { + retval = PTR_ERR(dentry); + goto err_release; + } + tty->link->driver_data = dentry; + + retval = ptm_driver->ops->open(tty, filp); + if (retval) + goto err_release; + + tty_debug_hangup(tty, "opening (count=%d)\n", tty->count); + + tty_unlock(tty); + return 0; +err_release: + tty_unlock(tty); + // This will also put-ref the fsi + tty_release(inode, filp); + return retval; +out: + devpts_kill_index(fsi, index); +out_put_fsi: + devpts_release(fsi); +out_free_file: + tty_free_file(filp); + return retval; +} + +static struct file_operations ptmx_fops __ro_after_init; + +static void __init unix98_pty_init(void) +{ + ptm_driver = tty_alloc_driver(NR_UNIX98_PTY_MAX, + TTY_DRIVER_RESET_TERMIOS | + TTY_DRIVER_REAL_RAW | + TTY_DRIVER_DYNAMIC_DEV | + TTY_DRIVER_DEVPTS_MEM | + TTY_DRIVER_DYNAMIC_ALLOC); + if (IS_ERR(ptm_driver)) + panic("Couldn't allocate Unix98 ptm driver"); + pts_driver = tty_alloc_driver(NR_UNIX98_PTY_MAX, + TTY_DRIVER_RESET_TERMIOS | + TTY_DRIVER_REAL_RAW | + TTY_DRIVER_DYNAMIC_DEV | + TTY_DRIVER_DEVPTS_MEM | + TTY_DRIVER_DYNAMIC_ALLOC); + if (IS_ERR(pts_driver)) + panic("Couldn't allocate Unix98 pts driver"); + + ptm_driver->driver_name = "pty_master"; + ptm_driver->name = "ptm"; + ptm_driver->major = UNIX98_PTY_MASTER_MAJOR; + ptm_driver->minor_start = 0; + ptm_driver->type = TTY_DRIVER_TYPE_PTY; + ptm_driver->subtype = PTY_TYPE_MASTER; + ptm_driver->init_termios = tty_std_termios; + ptm_driver->init_termios.c_iflag = 0; + ptm_driver->init_termios.c_oflag = 0; + ptm_driver->init_termios.c_cflag = B38400 | CS8 | CREAD; + ptm_driver->init_termios.c_lflag = 0; + ptm_driver->init_termios.c_ispeed = 38400; + ptm_driver->init_termios.c_ospeed = 38400; + ptm_driver->other = pts_driver; + tty_set_operations(ptm_driver, &ptm_unix98_ops); + + pts_driver->driver_name = "pty_slave"; + pts_driver->name = "pts"; + pts_driver->major = UNIX98_PTY_SLAVE_MAJOR; + pts_driver->minor_start = 0; + pts_driver->type = TTY_DRIVER_TYPE_PTY; + pts_driver->subtype = PTY_TYPE_SLAVE; + pts_driver->init_termios = tty_std_termios; + pts_driver->init_termios.c_cflag = B38400 | CS8 | CREAD; + pts_driver->init_termios.c_ispeed = 38400; + pts_driver->init_termios.c_ospeed = 38400; + pts_driver->other = ptm_driver; + tty_set_operations(pts_driver, &pty_unix98_ops); + + if (tty_register_driver(ptm_driver)) + panic("Couldn't register Unix98 ptm driver"); + if (tty_register_driver(pts_driver)) + panic("Couldn't register Unix98 pts driver"); + + /* Now create the /dev/ptmx special device */ + tty_default_fops(&ptmx_fops); + ptmx_fops.open = ptmx_open; + + cdev_init(&ptmx_cdev, &ptmx_fops); + if (cdev_add(&ptmx_cdev, MKDEV(TTYAUX_MAJOR, 2), 1) || + register_chrdev_region(MKDEV(TTYAUX_MAJOR, 2), 1, "/dev/ptmx") < 0) + panic("Couldn't register /dev/ptmx driver"); + device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 2), NULL, "ptmx"); +} + +#else +static inline void unix98_pty_init(void) { } +#endif + +static int __init pty_init(void) +{ + legacy_pty_init(); + unix98_pty_init(); + return 0; +} +device_initcall(pty_init); diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c new file mode 100644 index 000000000..2540b2e4c --- /dev/null +++ b/drivers/tty/rocket.c @@ -0,0 +1,3127 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * RocketPort device driver for Linux + * + * Written by Theodore Ts'o, 1995, 1996, 1997, 1998, 1999, 2000. + * + * Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2003 by Comtrol, Inc. + */ + +/* + * Kernel Synchronization: + * + * This driver has 2 kernel control paths - exception handlers (calls into the driver + * from user mode) and the timer bottom half (tasklet). This is a polled driver, interrupts + * are not used. + * + * Critical data: + * - rp_table[], accessed through passed "info" pointers, is a global (static) array of + * serial port state information and the xmit_buf circular buffer. Protected by + * a per port spinlock. + * - xmit_flags[], an array of ints indexed by line (port) number, indicating that there + * is data to be transmitted. Protected by atomic bit operations. + * - rp_num_ports, int indicating number of open ports, protected by atomic operations. + * + * rp_write() and rp_write_char() functions use a per port semaphore to protect against + * simultaneous access to the same port by more than one process. + */ + +/****** Defines ******/ +#define ROCKET_PARANOIA_CHECK +#define ROCKET_DISABLE_SIMUSAGE + +#undef ROCKET_SOFT_FLOW +#undef ROCKET_DEBUG_OPEN +#undef ROCKET_DEBUG_INTR +#undef ROCKET_DEBUG_WRITE +#undef ROCKET_DEBUG_FLOW +#undef ROCKET_DEBUG_THROTTLE +#undef ROCKET_DEBUG_WAIT_UNTIL_SENT +#undef ROCKET_DEBUG_RECEIVE +#undef ROCKET_DEBUG_HANGUP +#undef REV_PCI_ORDER +#undef ROCKET_DEBUG_IO + +#define POLL_PERIOD (HZ/100) /* Polling period .01 seconds (10ms) */ + +/****** Kernel includes ******/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/****** RocketPort includes ******/ + +#include "rocket_int.h" +#include "rocket.h" + +#define ROCKET_VERSION "2.09" +#define ROCKET_DATE "12-June-2003" + +/****** RocketPort Local Variables ******/ + +static void rp_do_poll(struct timer_list *unused); + +static struct tty_driver *rocket_driver; + +static struct rocket_version driver_version = { + ROCKET_VERSION, ROCKET_DATE +}; + +static struct r_port *rp_table[MAX_RP_PORTS]; /* The main repository of serial port state information. */ +static unsigned int xmit_flags[NUM_BOARDS]; /* Bit significant, indicates port had data to transmit. */ + /* eg. Bit 0 indicates port 0 has xmit data, ... */ +static atomic_t rp_num_ports_open; /* Number of serial ports open */ +static DEFINE_TIMER(rocket_timer, rp_do_poll); + +static unsigned long board1; /* ISA addresses, retrieved from rocketport.conf */ +static unsigned long board2; +static unsigned long board3; +static unsigned long board4; +static unsigned long controller; +static bool support_low_speed; +static unsigned long modem1; +static unsigned long modem2; +static unsigned long modem3; +static unsigned long modem4; +static unsigned long pc104_1[8]; +static unsigned long pc104_2[8]; +static unsigned long pc104_3[8]; +static unsigned long pc104_4[8]; +static unsigned long *pc104[4] = { pc104_1, pc104_2, pc104_3, pc104_4 }; + +static int rp_baud_base[NUM_BOARDS]; /* Board config info (Someday make a per-board structure) */ +static unsigned long rcktpt_io_addr[NUM_BOARDS]; +static int rcktpt_type[NUM_BOARDS]; +static int is_PCI[NUM_BOARDS]; +static rocketModel_t rocketModel[NUM_BOARDS]; +static int max_board; +static const struct tty_port_operations rocket_port_ops; + +/* + * The following arrays define the interrupt bits corresponding to each AIOP. + * These bits are different between the ISA and regular PCI boards and the + * Universal PCI boards. + */ + +static Word_t aiop_intr_bits[AIOP_CTL_SIZE] = { + AIOP_INTR_BIT_0, + AIOP_INTR_BIT_1, + AIOP_INTR_BIT_2, + AIOP_INTR_BIT_3 +}; + +#ifdef CONFIG_PCI +static Word_t upci_aiop_intr_bits[AIOP_CTL_SIZE] = { + UPCI_AIOP_INTR_BIT_0, + UPCI_AIOP_INTR_BIT_1, + UPCI_AIOP_INTR_BIT_2, + UPCI_AIOP_INTR_BIT_3 +}; +#endif + +static Byte_t RData[RDATASIZE] = { + 0x00, 0x09, 0xf6, 0x82, + 0x02, 0x09, 0x86, 0xfb, + 0x04, 0x09, 0x00, 0x0a, + 0x06, 0x09, 0x01, 0x0a, + 0x08, 0x09, 0x8a, 0x13, + 0x0a, 0x09, 0xc5, 0x11, + 0x0c, 0x09, 0x86, 0x85, + 0x0e, 0x09, 0x20, 0x0a, + 0x10, 0x09, 0x21, 0x0a, + 0x12, 0x09, 0x41, 0xff, + 0x14, 0x09, 0x82, 0x00, + 0x16, 0x09, 0x82, 0x7b, + 0x18, 0x09, 0x8a, 0x7d, + 0x1a, 0x09, 0x88, 0x81, + 0x1c, 0x09, 0x86, 0x7a, + 0x1e, 0x09, 0x84, 0x81, + 0x20, 0x09, 0x82, 0x7c, + 0x22, 0x09, 0x0a, 0x0a +}; + +static Byte_t RRegData[RREGDATASIZE] = { + 0x00, 0x09, 0xf6, 0x82, /* 00: Stop Rx processor */ + 0x08, 0x09, 0x8a, 0x13, /* 04: Tx software flow control */ + 0x0a, 0x09, 0xc5, 0x11, /* 08: XON char */ + 0x0c, 0x09, 0x86, 0x85, /* 0c: XANY */ + 0x12, 0x09, 0x41, 0xff, /* 10: Rx mask char */ + 0x14, 0x09, 0x82, 0x00, /* 14: Compare/Ignore #0 */ + 0x16, 0x09, 0x82, 0x7b, /* 18: Compare #1 */ + 0x18, 0x09, 0x8a, 0x7d, /* 1c: Compare #2 */ + 0x1a, 0x09, 0x88, 0x81, /* 20: Interrupt #1 */ + 0x1c, 0x09, 0x86, 0x7a, /* 24: Ignore/Replace #1 */ + 0x1e, 0x09, 0x84, 0x81, /* 28: Interrupt #2 */ + 0x20, 0x09, 0x82, 0x7c, /* 2c: Ignore/Replace #2 */ + 0x22, 0x09, 0x0a, 0x0a /* 30: Rx FIFO Enable */ +}; + +static CONTROLLER_T sController[CTL_SIZE] = { + {-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0}, + {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}}, + {-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0}, + {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}}, + {-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0}, + {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}}, + {-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0}, + {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}} +}; + +static Byte_t sBitMapClrTbl[8] = { + 0xfe, 0xfd, 0xfb, 0xf7, 0xef, 0xdf, 0xbf, 0x7f +}; + +static Byte_t sBitMapSetTbl[8] = { + 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80 +}; + +static int sClockPrescale = 0x14; + +/* + * Line number is the ttySIx number (x), the Minor number. We + * assign them sequentially, starting at zero. The following + * array keeps track of the line number assigned to a given board/aiop/channel. + */ +static unsigned char lineNumbers[MAX_RP_PORTS]; +static unsigned long nextLineNumber; + +/***** RocketPort Static Prototypes *********/ +static int __init init_ISA(int i); +static void rp_wait_until_sent(struct tty_struct *tty, int timeout); +static void rp_flush_buffer(struct tty_struct *tty); +static unsigned char GetLineNumber(int ctrl, int aiop, int ch); +static unsigned char SetLineNumber(int ctrl, int aiop, int ch); +static void rp_start(struct tty_struct *tty); +static int sInitChan(CONTROLLER_T * CtlP, CHANNEL_T * ChP, int AiopNum, + int ChanNum); +static void sSetInterfaceMode(CHANNEL_T * ChP, Byte_t mode); +static void sFlushRxFIFO(CHANNEL_T * ChP); +static void sFlushTxFIFO(CHANNEL_T * ChP); +static void sEnInterrupts(CHANNEL_T * ChP, Word_t Flags); +static void sDisInterrupts(CHANNEL_T * ChP, Word_t Flags); +static void sModemReset(CONTROLLER_T * CtlP, int chan, int on); +static void sPCIModemReset(CONTROLLER_T * CtlP, int chan, int on); +static int sWriteTxPrioByte(CHANNEL_T * ChP, Byte_t Data); +static int sInitController(CONTROLLER_T * CtlP, int CtlNum, ByteIO_t MudbacIO, + ByteIO_t * AiopIOList, int AiopIOListSize, + int IRQNum, Byte_t Frequency, int PeriodicOnly); +static int sReadAiopID(ByteIO_t io); +static int sReadAiopNumChan(WordIO_t io); + +MODULE_AUTHOR("Theodore Ts'o"); +MODULE_DESCRIPTION("Comtrol RocketPort driver"); +module_param_hw(board1, ulong, ioport, 0); +MODULE_PARM_DESC(board1, "I/O port for (ISA) board #1"); +module_param_hw(board2, ulong, ioport, 0); +MODULE_PARM_DESC(board2, "I/O port for (ISA) board #2"); +module_param_hw(board3, ulong, ioport, 0); +MODULE_PARM_DESC(board3, "I/O port for (ISA) board #3"); +module_param_hw(board4, ulong, ioport, 0); +MODULE_PARM_DESC(board4, "I/O port for (ISA) board #4"); +module_param_hw(controller, ulong, ioport, 0); +MODULE_PARM_DESC(controller, "I/O port for (ISA) rocketport controller"); +module_param(support_low_speed, bool, 0); +MODULE_PARM_DESC(support_low_speed, "1 means support 50 baud, 0 means support 460400 baud"); +module_param(modem1, ulong, 0); +MODULE_PARM_DESC(modem1, "1 means (ISA) board #1 is a RocketModem"); +module_param(modem2, ulong, 0); +MODULE_PARM_DESC(modem2, "1 means (ISA) board #2 is a RocketModem"); +module_param(modem3, ulong, 0); +MODULE_PARM_DESC(modem3, "1 means (ISA) board #3 is a RocketModem"); +module_param(modem4, ulong, 0); +MODULE_PARM_DESC(modem4, "1 means (ISA) board #4 is a RocketModem"); +module_param_array(pc104_1, ulong, NULL, 0); +MODULE_PARM_DESC(pc104_1, "set interface types for ISA(PC104) board #1 (e.g. pc104_1=232,232,485,485,..."); +module_param_array(pc104_2, ulong, NULL, 0); +MODULE_PARM_DESC(pc104_2, "set interface types for ISA(PC104) board #2 (e.g. pc104_2=232,232,485,485,..."); +module_param_array(pc104_3, ulong, NULL, 0); +MODULE_PARM_DESC(pc104_3, "set interface types for ISA(PC104) board #3 (e.g. pc104_3=232,232,485,485,..."); +module_param_array(pc104_4, ulong, NULL, 0); +MODULE_PARM_DESC(pc104_4, "set interface types for ISA(PC104) board #4 (e.g. pc104_4=232,232,485,485,..."); + +static int __init rp_init(void); +static void rp_cleanup_module(void); + +module_init(rp_init); +module_exit(rp_cleanup_module); + + +MODULE_LICENSE("Dual BSD/GPL"); + +/*************************************************************************/ +/* Module code starts here */ + +static inline int rocket_paranoia_check(struct r_port *info, + const char *routine) +{ +#ifdef ROCKET_PARANOIA_CHECK + if (!info) + return 1; + if (info->magic != RPORT_MAGIC) { + printk(KERN_WARNING "Warning: bad magic number for rocketport " + "struct in %s\n", routine); + return 1; + } +#endif + return 0; +} + + +/* Serial port receive data function. Called (from timer poll) when an AIOPIC signals + * that receive data is present on a serial port. Pulls data from FIFO, moves it into the + * tty layer. + */ +static void rp_do_receive(struct r_port *info, CHANNEL_t *cp, + unsigned int ChanStatus) +{ + unsigned int CharNStat; + int ToRecv, wRecv, space; + unsigned char *cbuf; + + ToRecv = sGetRxCnt(cp); +#ifdef ROCKET_DEBUG_INTR + printk(KERN_INFO "rp_do_receive(%d)...\n", ToRecv); +#endif + if (ToRecv == 0) + return; + + /* + * if status indicates there are errored characters in the + * FIFO, then enter status mode (a word in FIFO holds + * character and status). + */ + if (ChanStatus & (RXFOVERFL | RXBREAK | RXFRAME | RXPARITY)) { + if (!(ChanStatus & STATMODE)) { +#ifdef ROCKET_DEBUG_RECEIVE + printk(KERN_INFO "Entering STATMODE...\n"); +#endif + ChanStatus |= STATMODE; + sEnRxStatusMode(cp); + } + } + + /* + * if we previously entered status mode, then read down the + * FIFO one word at a time, pulling apart the character and + * the status. Update error counters depending on status + */ + if (ChanStatus & STATMODE) { +#ifdef ROCKET_DEBUG_RECEIVE + printk(KERN_INFO "Ignore %x, read %x...\n", + info->ignore_status_mask, info->read_status_mask); +#endif + while (ToRecv) { + char flag; + + CharNStat = sInW(sGetTxRxDataIO(cp)); +#ifdef ROCKET_DEBUG_RECEIVE + printk(KERN_INFO "%x...\n", CharNStat); +#endif + if (CharNStat & STMBREAKH) + CharNStat &= ~(STMFRAMEH | STMPARITYH); + if (CharNStat & info->ignore_status_mask) { + ToRecv--; + continue; + } + CharNStat &= info->read_status_mask; + if (CharNStat & STMBREAKH) + flag = TTY_BREAK; + else if (CharNStat & STMPARITYH) + flag = TTY_PARITY; + else if (CharNStat & STMFRAMEH) + flag = TTY_FRAME; + else if (CharNStat & STMRCVROVRH) + flag = TTY_OVERRUN; + else + flag = TTY_NORMAL; + tty_insert_flip_char(&info->port, CharNStat & 0xff, + flag); + ToRecv--; + } + + /* + * after we've emptied the FIFO in status mode, turn + * status mode back off + */ + if (sGetRxCnt(cp) == 0) { +#ifdef ROCKET_DEBUG_RECEIVE + printk(KERN_INFO "Status mode off.\n"); +#endif + sDisRxStatusMode(cp); + } + } else { + /* + * we aren't in status mode, so read down the FIFO two + * characters at time by doing repeated word IO + * transfer. + */ + space = tty_prepare_flip_string(&info->port, &cbuf, ToRecv); + if (space < ToRecv) { +#ifdef ROCKET_DEBUG_RECEIVE + printk(KERN_INFO "rp_do_receive:insufficient space ToRecv=%d space=%d\n", ToRecv, space); +#endif + if (space <= 0) + return; + ToRecv = space; + } + wRecv = ToRecv >> 1; + if (wRecv) + sInStrW(sGetTxRxDataIO(cp), (unsigned short *) cbuf, wRecv); + if (ToRecv & 1) + cbuf[ToRecv - 1] = sInB(sGetTxRxDataIO(cp)); + } + /* Push the data up to the tty layer */ + tty_flip_buffer_push(&info->port); +} + +/* + * Serial port transmit data function. Called from the timer polling loop as a + * result of a bit set in xmit_flags[], indicating data (from the tty layer) is ready + * to be sent out the serial port. Data is buffered in rp_table[line].xmit_buf, it is + * moved to the port's xmit FIFO. *info is critical data, protected by spinlocks. + */ +static void rp_do_transmit(struct r_port *info) +{ + int c; + CHANNEL_t *cp = &info->channel; + struct tty_struct *tty; + unsigned long flags; + +#ifdef ROCKET_DEBUG_INTR + printk(KERN_DEBUG "%s\n", __func__); +#endif + if (!info) + return; + tty = tty_port_tty_get(&info->port); + + if (tty == NULL) { + printk(KERN_WARNING "rp: WARNING %s called with tty==NULL\n", __func__); + clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]); + return; + } + + spin_lock_irqsave(&info->slock, flags); + info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp); + + /* Loop sending data to FIFO until done or FIFO full */ + while (1) { + if (tty->stopped) + break; + c = min(info->xmit_fifo_room, info->xmit_cnt); + c = min(c, XMIT_BUF_SIZE - info->xmit_tail); + if (c <= 0 || info->xmit_fifo_room <= 0) + break; + sOutStrW(sGetTxRxDataIO(cp), (unsigned short *) (info->xmit_buf + info->xmit_tail), c / 2); + if (c & 1) + sOutB(sGetTxRxDataIO(cp), info->xmit_buf[info->xmit_tail + c - 1]); + info->xmit_tail += c; + info->xmit_tail &= XMIT_BUF_SIZE - 1; + info->xmit_cnt -= c; + info->xmit_fifo_room -= c; +#ifdef ROCKET_DEBUG_INTR + printk(KERN_INFO "tx %d chars...\n", c); +#endif + } + + if (info->xmit_cnt == 0) + clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]); + + if (info->xmit_cnt < WAKEUP_CHARS) { + tty_wakeup(tty); +#ifdef ROCKETPORT_HAVE_POLL_WAIT + wake_up_interruptible(&tty->poll_wait); +#endif + } + + spin_unlock_irqrestore(&info->slock, flags); + tty_kref_put(tty); + +#ifdef ROCKET_DEBUG_INTR + printk(KERN_DEBUG "(%d,%d,%d,%d)...\n", info->xmit_cnt, info->xmit_head, + info->xmit_tail, info->xmit_fifo_room); +#endif +} + +/* + * Called when a serial port signals it has read data in it's RX FIFO. + * It checks what interrupts are pending and services them, including + * receiving serial data. + */ +static void rp_handle_port(struct r_port *info) +{ + CHANNEL_t *cp; + unsigned int IntMask, ChanStatus; + + if (!info) + return; + + if (!tty_port_initialized(&info->port)) { + printk(KERN_WARNING "rp: WARNING: rp_handle_port called with " + "info->flags & NOT_INIT\n"); + return; + } + + cp = &info->channel; + + IntMask = sGetChanIntID(cp) & info->intmask; +#ifdef ROCKET_DEBUG_INTR + printk(KERN_INFO "rp_interrupt %02x...\n", IntMask); +#endif + ChanStatus = sGetChanStatus(cp); + if (IntMask & RXF_TRIG) { /* Rx FIFO trigger level */ + rp_do_receive(info, cp, ChanStatus); + } + if (IntMask & DELTA_CD) { /* CD change */ +#if (defined(ROCKET_DEBUG_OPEN) || defined(ROCKET_DEBUG_INTR) || defined(ROCKET_DEBUG_HANGUP)) + printk(KERN_INFO "ttyR%d CD now %s...\n", info->line, + (ChanStatus & CD_ACT) ? "on" : "off"); +#endif + if (!(ChanStatus & CD_ACT) && info->cd_status) { +#ifdef ROCKET_DEBUG_HANGUP + printk(KERN_INFO "CD drop, calling hangup.\n"); +#endif + tty_port_tty_hangup(&info->port, false); + } + info->cd_status = (ChanStatus & CD_ACT) ? 1 : 0; + wake_up_interruptible(&info->port.open_wait); + } +#ifdef ROCKET_DEBUG_INTR + if (IntMask & DELTA_CTS) { /* CTS change */ + printk(KERN_INFO "CTS change...\n"); + } + if (IntMask & DELTA_DSR) { /* DSR change */ + printk(KERN_INFO "DSR change...\n"); + } +#endif +} + +/* + * The top level polling routine. Repeats every 1/100 HZ (10ms). + */ +static void rp_do_poll(struct timer_list *unused) +{ + CONTROLLER_t *ctlp; + int ctrl, aiop, ch, line; + unsigned int xmitmask, i; + unsigned int CtlMask; + unsigned char AiopMask; + Word_t bit; + + /* Walk through all the boards (ctrl's) */ + for (ctrl = 0; ctrl < max_board; ctrl++) { + if (rcktpt_io_addr[ctrl] <= 0) + continue; + + /* Get a ptr to the board's control struct */ + ctlp = sCtlNumToCtlPtr(ctrl); + + /* Get the interrupt status from the board */ +#ifdef CONFIG_PCI + if (ctlp->BusType == isPCI) + CtlMask = sPCIGetControllerIntStatus(ctlp); + else +#endif + CtlMask = sGetControllerIntStatus(ctlp); + + /* Check if any AIOP read bits are set */ + for (aiop = 0; CtlMask; aiop++) { + bit = ctlp->AiopIntrBits[aiop]; + if (CtlMask & bit) { + CtlMask &= ~bit; + AiopMask = sGetAiopIntStatus(ctlp, aiop); + + /* Check if any port read bits are set */ + for (ch = 0; AiopMask; AiopMask >>= 1, ch++) { + if (AiopMask & 1) { + + /* Get the line number (/dev/ttyRx number). */ + /* Read the data from the port. */ + line = GetLineNumber(ctrl, aiop, ch); + rp_handle_port(rp_table[line]); + } + } + } + } + + xmitmask = xmit_flags[ctrl]; + + /* + * xmit_flags contains bit-significant flags, indicating there is data + * to xmit on the port. Bit 0 is port 0 on this board, bit 1 is port + * 1, ... (32 total possible). The variable i has the aiop and ch + * numbers encoded in it (port 0-7 are aiop0, 8-15 are aiop1, etc). + */ + if (xmitmask) { + for (i = 0; i < rocketModel[ctrl].numPorts; i++) { + if (xmitmask & (1 << i)) { + aiop = (i & 0x18) >> 3; + ch = i & 0x07; + line = GetLineNumber(ctrl, aiop, ch); + rp_do_transmit(rp_table[line]); + } + } + } + } + + /* + * Reset the timer so we get called at the next clock tick (10ms). + */ + if (atomic_read(&rp_num_ports_open)) + mod_timer(&rocket_timer, jiffies + POLL_PERIOD); +} + +/* + * Initializes the r_port structure for a port, as well as enabling the port on + * the board. + * Inputs: board, aiop, chan numbers + */ +static void __init +init_r_port(int board, int aiop, int chan, struct pci_dev *pci_dev) +{ + unsigned rocketMode; + struct r_port *info; + int line; + CONTROLLER_T *ctlp; + + /* Get the next available line number */ + line = SetLineNumber(board, aiop, chan); + + ctlp = sCtlNumToCtlPtr(board); + + /* Get a r_port struct for the port, fill it in and save it globally, indexed by line number */ + info = kzalloc(sizeof (struct r_port), GFP_KERNEL); + if (!info) { + printk(KERN_ERR "Couldn't allocate info struct for line #%d\n", + line); + return; + } + + info->magic = RPORT_MAGIC; + info->line = line; + info->ctlp = ctlp; + info->board = board; + info->aiop = aiop; + info->chan = chan; + tty_port_init(&info->port); + info->port.ops = &rocket_port_ops; + info->flags &= ~ROCKET_MODE_MASK; + if (board < ARRAY_SIZE(pc104) && line < ARRAY_SIZE(pc104_1)) + switch (pc104[board][line]) { + case 422: + info->flags |= ROCKET_MODE_RS422; + break; + case 485: + info->flags |= ROCKET_MODE_RS485; + break; + case 232: + default: + info->flags |= ROCKET_MODE_RS232; + break; + } + else + info->flags |= ROCKET_MODE_RS232; + + info->intmask = RXF_TRIG | TXFIFO_MT | SRC_INT | DELTA_CD | DELTA_CTS | DELTA_DSR; + if (sInitChan(ctlp, &info->channel, aiop, chan) == 0) { + printk(KERN_ERR "RocketPort sInitChan(%d, %d, %d) failed!\n", + board, aiop, chan); + tty_port_destroy(&info->port); + kfree(info); + return; + } + + rocketMode = info->flags & ROCKET_MODE_MASK; + + if ((info->flags & ROCKET_RTS_TOGGLE) || (rocketMode == ROCKET_MODE_RS485)) + sEnRTSToggle(&info->channel); + else + sDisRTSToggle(&info->channel); + + if (ctlp->boardType == ROCKET_TYPE_PC104) { + switch (rocketMode) { + case ROCKET_MODE_RS485: + sSetInterfaceMode(&info->channel, InterfaceModeRS485); + break; + case ROCKET_MODE_RS422: + sSetInterfaceMode(&info->channel, InterfaceModeRS422); + break; + case ROCKET_MODE_RS232: + default: + if (info->flags & ROCKET_RTS_TOGGLE) + sSetInterfaceMode(&info->channel, InterfaceModeRS232T); + else + sSetInterfaceMode(&info->channel, InterfaceModeRS232); + break; + } + } + spin_lock_init(&info->slock); + mutex_init(&info->write_mtx); + rp_table[line] = info; + tty_port_register_device(&info->port, rocket_driver, line, + pci_dev ? &pci_dev->dev : NULL); +} + +/* + * Configures a rocketport port according to its termio settings. Called from + * user mode into the driver (exception handler). *info CD manipulation is spinlock protected. + */ +static void configure_r_port(struct tty_struct *tty, struct r_port *info, + struct ktermios *old_termios) +{ + unsigned cflag; + unsigned long flags; + unsigned rocketMode; + int bits, baud, divisor; + CHANNEL_t *cp; + struct ktermios *t = &tty->termios; + + cp = &info->channel; + cflag = t->c_cflag; + + /* Byte size and parity */ + if ((cflag & CSIZE) == CS8) { + sSetData8(cp); + bits = 10; + } else { + sSetData7(cp); + bits = 9; + } + if (cflag & CSTOPB) { + sSetStop2(cp); + bits++; + } else { + sSetStop1(cp); + } + + if (cflag & PARENB) { + sEnParity(cp); + bits++; + if (cflag & PARODD) { + sSetOddParity(cp); + } else { + sSetEvenParity(cp); + } + } else { + sDisParity(cp); + } + + /* baud rate */ + baud = tty_get_baud_rate(tty); + if (!baud) + baud = 9600; + divisor = ((rp_baud_base[info->board] + (baud >> 1)) / baud) - 1; + if ((divisor >= 8192 || divisor < 0) && old_termios) { + baud = tty_termios_baud_rate(old_termios); + if (!baud) + baud = 9600; + divisor = (rp_baud_base[info->board] / baud) - 1; + } + if (divisor >= 8192 || divisor < 0) { + baud = 9600; + divisor = (rp_baud_base[info->board] / baud) - 1; + } + info->cps = baud / bits; + sSetBaud(cp, divisor); + + /* FIXME: Should really back compute a baud rate from the divisor */ + tty_encode_baud_rate(tty, baud, baud); + + if (cflag & CRTSCTS) { + info->intmask |= DELTA_CTS; + sEnCTSFlowCtl(cp); + } else { + info->intmask &= ~DELTA_CTS; + sDisCTSFlowCtl(cp); + } + if (cflag & CLOCAL) { + info->intmask &= ~DELTA_CD; + } else { + spin_lock_irqsave(&info->slock, flags); + if (sGetChanStatus(cp) & CD_ACT) + info->cd_status = 1; + else + info->cd_status = 0; + info->intmask |= DELTA_CD; + spin_unlock_irqrestore(&info->slock, flags); + } + + /* + * Handle software flow control in the board + */ +#ifdef ROCKET_SOFT_FLOW + if (I_IXON(tty)) { + sEnTxSoftFlowCtl(cp); + if (I_IXANY(tty)) { + sEnIXANY(cp); + } else { + sDisIXANY(cp); + } + sSetTxXONChar(cp, START_CHAR(tty)); + sSetTxXOFFChar(cp, STOP_CHAR(tty)); + } else { + sDisTxSoftFlowCtl(cp); + sDisIXANY(cp); + sClrTxXOFF(cp); + } +#endif + + /* + * Set up ignore/read mask words + */ + info->read_status_mask = STMRCVROVRH | 0xFF; + if (I_INPCK(tty)) + info->read_status_mask |= STMFRAMEH | STMPARITYH; + if (I_BRKINT(tty) || I_PARMRK(tty)) + info->read_status_mask |= STMBREAKH; + + /* + * Characters to ignore + */ + info->ignore_status_mask = 0; + if (I_IGNPAR(tty)) + info->ignore_status_mask |= STMFRAMEH | STMPARITYH; + if (I_IGNBRK(tty)) { + info->ignore_status_mask |= STMBREAKH; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too. (For real raw support). + */ + if (I_IGNPAR(tty)) + info->ignore_status_mask |= STMRCVROVRH; + } + + rocketMode = info->flags & ROCKET_MODE_MASK; + + if ((info->flags & ROCKET_RTS_TOGGLE) + || (rocketMode == ROCKET_MODE_RS485)) + sEnRTSToggle(cp); + else + sDisRTSToggle(cp); + + sSetRTS(&info->channel); + + if (cp->CtlP->boardType == ROCKET_TYPE_PC104) { + switch (rocketMode) { + case ROCKET_MODE_RS485: + sSetInterfaceMode(cp, InterfaceModeRS485); + break; + case ROCKET_MODE_RS422: + sSetInterfaceMode(cp, InterfaceModeRS422); + break; + case ROCKET_MODE_RS232: + default: + if (info->flags & ROCKET_RTS_TOGGLE) + sSetInterfaceMode(cp, InterfaceModeRS232T); + else + sSetInterfaceMode(cp, InterfaceModeRS232); + break; + } + } +} + +static int carrier_raised(struct tty_port *port) +{ + struct r_port *info = container_of(port, struct r_port, port); + return (sGetChanStatusLo(&info->channel) & CD_ACT) ? 1 : 0; +} + +static void dtr_rts(struct tty_port *port, int on) +{ + struct r_port *info = container_of(port, struct r_port, port); + if (on) { + sSetDTR(&info->channel); + sSetRTS(&info->channel); + } else { + sClrDTR(&info->channel); + sClrRTS(&info->channel); + } +} + +/* + * Exception handler that opens a serial port. Creates xmit_buf storage, fills in + * port's r_port struct. Initializes the port hardware. + */ +static int rp_open(struct tty_struct *tty, struct file *filp) +{ + struct r_port *info; + struct tty_port *port; + int retval; + CHANNEL_t *cp; + unsigned long page; + + info = rp_table[tty->index]; + if (info == NULL) + return -ENXIO; + port = &info->port; + + page = __get_free_page(GFP_KERNEL); + if (!page) + return -ENOMEM; + + /* + * We must not sleep from here until the port is marked fully in use. + */ + if (info->xmit_buf) + free_page(page); + else + info->xmit_buf = (unsigned char *) page; + + tty->driver_data = info; + tty_port_tty_set(port, tty); + + if (port->count++ == 0) { + atomic_inc(&rp_num_ports_open); + +#ifdef ROCKET_DEBUG_OPEN + printk(KERN_INFO "rocket mod++ = %d...\n", + atomic_read(&rp_num_ports_open)); +#endif + } +#ifdef ROCKET_DEBUG_OPEN + printk(KERN_INFO "rp_open ttyR%d, count=%d\n", info->line, info->port.count); +#endif + + /* + * Info->count is now 1; so it's safe to sleep now. + */ + if (!tty_port_initialized(port)) { + cp = &info->channel; + sSetRxTrigger(cp, TRIG_1); + if (sGetChanStatus(cp) & CD_ACT) + info->cd_status = 1; + else + info->cd_status = 0; + sDisRxStatusMode(cp); + sFlushRxFIFO(cp); + sFlushTxFIFO(cp); + + sEnInterrupts(cp, (TXINT_EN | MCINT_EN | RXINT_EN | SRCINT_EN | CHANINT_EN)); + sSetRxTrigger(cp, TRIG_1); + + sGetChanStatus(cp); + sDisRxStatusMode(cp); + sClrTxXOFF(cp); + + sDisCTSFlowCtl(cp); + sDisTxSoftFlowCtl(cp); + + sEnRxFIFO(cp); + sEnTransmit(cp); + + tty_port_set_initialized(&info->port, 1); + + configure_r_port(tty, info, NULL); + if (C_BAUD(tty)) { + sSetDTR(cp); + sSetRTS(cp); + } + } + /* Starts (or resets) the maint polling loop */ + mod_timer(&rocket_timer, jiffies + POLL_PERIOD); + + retval = tty_port_block_til_ready(port, tty, filp); + if (retval) { +#ifdef ROCKET_DEBUG_OPEN + printk(KERN_INFO "rp_open returning after block_til_ready with %d\n", retval); +#endif + return retval; + } + return 0; +} + +/* + * Exception handler that closes a serial port. info->port.count is considered critical. + */ +static void rp_close(struct tty_struct *tty, struct file *filp) +{ + struct r_port *info = tty->driver_data; + struct tty_port *port = &info->port; + int timeout; + CHANNEL_t *cp; + + if (rocket_paranoia_check(info, "rp_close")) + return; + +#ifdef ROCKET_DEBUG_OPEN + printk(KERN_INFO "rp_close ttyR%d, count = %d\n", info->line, info->port.count); +#endif + + if (tty_port_close_start(port, tty, filp) == 0) + return; + + mutex_lock(&port->mutex); + cp = &info->channel; + /* + * Before we drop DTR, make sure the UART transmitter + * has completely drained; this is especially + * important if there is a transmit FIFO! + */ + timeout = (sGetTxCnt(cp) + 1) * HZ / info->cps; + if (timeout == 0) + timeout = 1; + rp_wait_until_sent(tty, timeout); + clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]); + + sDisTransmit(cp); + sDisInterrupts(cp, (TXINT_EN | MCINT_EN | RXINT_EN | SRCINT_EN | CHANINT_EN)); + sDisCTSFlowCtl(cp); + sDisTxSoftFlowCtl(cp); + sClrTxXOFF(cp); + sFlushRxFIFO(cp); + sFlushTxFIFO(cp); + sClrRTS(cp); + if (C_HUPCL(tty)) + sClrDTR(cp); + + rp_flush_buffer(tty); + + tty_ldisc_flush(tty); + + clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]); + + /* We can't yet use tty_port_close_end as the buffer handling in this + driver is a bit different to the usual */ + + if (port->blocked_open) { + if (port->close_delay) { + msleep_interruptible(jiffies_to_msecs(port->close_delay)); + } + wake_up_interruptible(&port->open_wait); + } else { + if (info->xmit_buf) { + free_page((unsigned long) info->xmit_buf); + info->xmit_buf = NULL; + } + } + spin_lock_irq(&port->lock); + tty->closing = 0; + spin_unlock_irq(&port->lock); + tty_port_set_initialized(port, 0); + tty_port_set_active(port, 0); + mutex_unlock(&port->mutex); + tty_port_tty_set(port, NULL); + + atomic_dec(&rp_num_ports_open); + +#ifdef ROCKET_DEBUG_OPEN + printk(KERN_INFO "rocket mod-- = %d...\n", + atomic_read(&rp_num_ports_open)); + printk(KERN_INFO "rp_close ttyR%d complete shutdown\n", info->line); +#endif + +} + +static void rp_set_termios(struct tty_struct *tty, + struct ktermios *old_termios) +{ + struct r_port *info = tty->driver_data; + CHANNEL_t *cp; + unsigned cflag; + + if (rocket_paranoia_check(info, "rp_set_termios")) + return; + + cflag = tty->termios.c_cflag; + + /* + * This driver doesn't support CS5 or CS6 + */ + if (((cflag & CSIZE) == CS5) || ((cflag & CSIZE) == CS6)) + tty->termios.c_cflag = + ((cflag & ~CSIZE) | (old_termios->c_cflag & CSIZE)); + /* Or CMSPAR */ + tty->termios.c_cflag &= ~CMSPAR; + + configure_r_port(tty, info, old_termios); + + cp = &info->channel; + + /* Handle transition to B0 status */ + if ((old_termios->c_cflag & CBAUD) && !C_BAUD(tty)) { + sClrDTR(cp); + sClrRTS(cp); + } + + /* Handle transition away from B0 status */ + if (!(old_termios->c_cflag & CBAUD) && C_BAUD(tty)) { + sSetRTS(cp); + sSetDTR(cp); + } + + if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty)) + rp_start(tty); +} + +static int rp_break(struct tty_struct *tty, int break_state) +{ + struct r_port *info = tty->driver_data; + unsigned long flags; + + if (rocket_paranoia_check(info, "rp_break")) + return -EINVAL; + + spin_lock_irqsave(&info->slock, flags); + if (break_state == -1) + sSendBreak(&info->channel); + else + sClrBreak(&info->channel); + spin_unlock_irqrestore(&info->slock, flags); + return 0; +} + +/* + * sGetChanRI used to be a macro in rocket_int.h. When the functionality for + * the UPCI boards was added, it was decided to make this a function because + * the macro was getting too complicated. All cases except the first one + * (UPCIRingInd) are taken directly from the original macro. + */ +static int sGetChanRI(CHANNEL_T * ChP) +{ + CONTROLLER_t *CtlP = ChP->CtlP; + int ChanNum = ChP->ChanNum; + int RingInd = 0; + + if (CtlP->UPCIRingInd) + RingInd = !(sInB(CtlP->UPCIRingInd) & sBitMapSetTbl[ChanNum]); + else if (CtlP->AltChanRingIndicator) + RingInd = sInB((ByteIO_t) (ChP->ChanStat + 8)) & DSR_ACT; + else if (CtlP->boardType == ROCKET_TYPE_PC104) + RingInd = !(sInB(CtlP->AiopIO[3]) & sBitMapSetTbl[ChanNum]); + + return RingInd; +} + +/********************************************************************************************/ +/* Here are the routines used by rp_ioctl. These are all called from exception handlers. */ + +/* + * Returns the state of the serial modem control lines. These next 2 functions + * are the way kernel versions > 2.5 handle modem control lines rather than IOCTLs. + */ +static int rp_tiocmget(struct tty_struct *tty) +{ + struct r_port *info = tty->driver_data; + unsigned int control, result, ChanStatus; + + ChanStatus = sGetChanStatusLo(&info->channel); + control = info->channel.TxControl[3]; + result = ((control & SET_RTS) ? TIOCM_RTS : 0) | + ((control & SET_DTR) ? TIOCM_DTR : 0) | + ((ChanStatus & CD_ACT) ? TIOCM_CAR : 0) | + (sGetChanRI(&info->channel) ? TIOCM_RNG : 0) | + ((ChanStatus & DSR_ACT) ? TIOCM_DSR : 0) | + ((ChanStatus & CTS_ACT) ? TIOCM_CTS : 0); + + return result; +} + +/* + * Sets the modem control lines + */ +static int rp_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct r_port *info = tty->driver_data; + + if (set & TIOCM_RTS) + info->channel.TxControl[3] |= SET_RTS; + if (set & TIOCM_DTR) + info->channel.TxControl[3] |= SET_DTR; + if (clear & TIOCM_RTS) + info->channel.TxControl[3] &= ~SET_RTS; + if (clear & TIOCM_DTR) + info->channel.TxControl[3] &= ~SET_DTR; + + out32(info->channel.IndexAddr, info->channel.TxControl); + return 0; +} + +static int get_config(struct r_port *info, struct rocket_config __user *retinfo) +{ + struct rocket_config tmp; + + memset(&tmp, 0, sizeof (tmp)); + mutex_lock(&info->port.mutex); + tmp.line = info->line; + tmp.flags = info->flags; + tmp.close_delay = info->port.close_delay; + tmp.closing_wait = info->port.closing_wait; + tmp.port = rcktpt_io_addr[(info->line >> 5) & 3]; + mutex_unlock(&info->port.mutex); + + if (copy_to_user(retinfo, &tmp, sizeof (*retinfo))) + return -EFAULT; + return 0; +} + +static int set_config(struct tty_struct *tty, struct r_port *info, + struct rocket_config __user *new_info) +{ + struct rocket_config new_serial; + + if (copy_from_user(&new_serial, new_info, sizeof (new_serial))) + return -EFAULT; + + mutex_lock(&info->port.mutex); + if (!capable(CAP_SYS_ADMIN)) + { + if ((new_serial.flags & ~ROCKET_USR_MASK) != (info->flags & ~ROCKET_USR_MASK)) { + mutex_unlock(&info->port.mutex); + return -EPERM; + } + info->flags = ((info->flags & ~ROCKET_USR_MASK) | (new_serial.flags & ROCKET_USR_MASK)); + mutex_unlock(&info->port.mutex); + return 0; + } + + if ((new_serial.flags ^ info->flags) & ROCKET_SPD_MASK) { + /* warn about deprecation, unless clearing */ + if (new_serial.flags & ROCKET_SPD_MASK) + dev_warn_ratelimited(tty->dev, "use of SPD flags is deprecated\n"); + } + + info->flags = ((info->flags & ~ROCKET_FLAGS) | (new_serial.flags & ROCKET_FLAGS)); + info->port.close_delay = new_serial.close_delay; + info->port.closing_wait = new_serial.closing_wait; + + mutex_unlock(&info->port.mutex); + + configure_r_port(tty, info, NULL); + return 0; +} + +/* + * This function fills in a rocket_ports struct with information + * about what boards/ports are in the system. This info is passed + * to user space. See setrocket.c where the info is used to create + * the /dev/ttyRx ports. + */ +static int get_ports(struct r_port *info, struct rocket_ports __user *retports) +{ + struct rocket_ports *tmp; + int board, ret = 0; + + tmp = kzalloc(sizeof(*tmp), GFP_KERNEL); + if (!tmp) + return -ENOMEM; + + tmp->tty_major = rocket_driver->major; + + for (board = 0; board < 4; board++) { + tmp->rocketModel[board].model = rocketModel[board].model; + strcpy(tmp->rocketModel[board].modelString, + rocketModel[board].modelString); + tmp->rocketModel[board].numPorts = rocketModel[board].numPorts; + tmp->rocketModel[board].loadrm2 = rocketModel[board].loadrm2; + tmp->rocketModel[board].startingPortNumber = + rocketModel[board].startingPortNumber; + } + if (copy_to_user(retports, tmp, sizeof(*retports))) + ret = -EFAULT; + kfree(tmp); + return ret; +} + +static int reset_rm2(struct r_port *info, void __user *arg) +{ + int reset; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + if (copy_from_user(&reset, arg, sizeof (int))) + return -EFAULT; + if (reset) + reset = 1; + + if (rcktpt_type[info->board] != ROCKET_TYPE_MODEMII && + rcktpt_type[info->board] != ROCKET_TYPE_MODEMIII) + return -EINVAL; + + if (info->ctlp->BusType == isISA) + sModemReset(info->ctlp, info->chan, reset); + else + sPCIModemReset(info->ctlp, info->chan, reset); + + return 0; +} + +static int get_version(struct r_port *info, struct rocket_version __user *retvers) +{ + if (copy_to_user(retvers, &driver_version, sizeof (*retvers))) + return -EFAULT; + return 0; +} + +/* IOCTL call handler into the driver */ +static int rp_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct r_port *info = tty->driver_data; + void __user *argp = (void __user *)arg; + int ret = 0; + + if (cmd != RCKP_GET_PORTS && rocket_paranoia_check(info, "rp_ioctl")) + return -ENXIO; + + switch (cmd) { + case RCKP_GET_CONFIG: + dev_warn_ratelimited(tty->dev, + "RCKP_GET_CONFIG option is deprecated\n"); + ret = get_config(info, argp); + break; + case RCKP_SET_CONFIG: + dev_warn_ratelimited(tty->dev, + "RCKP_SET_CONFIG option is deprecated\n"); + ret = set_config(tty, info, argp); + break; + case RCKP_GET_PORTS: + dev_warn_ratelimited(tty->dev, + "RCKP_GET_PORTS option is deprecated\n"); + ret = get_ports(info, argp); + break; + case RCKP_RESET_RM2: + dev_warn_ratelimited(tty->dev, + "RCKP_RESET_RM2 option is deprecated\n"); + ret = reset_rm2(info, argp); + break; + case RCKP_GET_VERSION: + dev_warn_ratelimited(tty->dev, + "RCKP_GET_VERSION option is deprecated\n"); + ret = get_version(info, argp); + break; + default: + ret = -ENOIOCTLCMD; + } + return ret; +} + +static void rp_send_xchar(struct tty_struct *tty, char ch) +{ + struct r_port *info = tty->driver_data; + CHANNEL_t *cp; + + if (rocket_paranoia_check(info, "rp_send_xchar")) + return; + + cp = &info->channel; + if (sGetTxCnt(cp)) + sWriteTxPrioByte(cp, ch); + else + sWriteTxByte(sGetTxRxDataIO(cp), ch); +} + +static void rp_throttle(struct tty_struct *tty) +{ + struct r_port *info = tty->driver_data; + +#ifdef ROCKET_DEBUG_THROTTLE + printk(KERN_INFO "throttle %s ....\n", tty->name); +#endif + + if (rocket_paranoia_check(info, "rp_throttle")) + return; + + if (I_IXOFF(tty)) + rp_send_xchar(tty, STOP_CHAR(tty)); + + sClrRTS(&info->channel); +} + +static void rp_unthrottle(struct tty_struct *tty) +{ + struct r_port *info = tty->driver_data; +#ifdef ROCKET_DEBUG_THROTTLE + printk(KERN_INFO "unthrottle %s ....\n", tty->name); +#endif + + if (rocket_paranoia_check(info, "rp_unthrottle")) + return; + + if (I_IXOFF(tty)) + rp_send_xchar(tty, START_CHAR(tty)); + + sSetRTS(&info->channel); +} + +/* + * ------------------------------------------------------------ + * rp_stop() and rp_start() + * + * This routines are called before setting or resetting tty->stopped. + * They enable or disable transmitter interrupts, as necessary. + * ------------------------------------------------------------ + */ +static void rp_stop(struct tty_struct *tty) +{ + struct r_port *info = tty->driver_data; + +#ifdef ROCKET_DEBUG_FLOW + printk(KERN_INFO "stop %s: %d %d....\n", tty->name, + info->xmit_cnt, info->xmit_fifo_room); +#endif + + if (rocket_paranoia_check(info, "rp_stop")) + return; + + if (sGetTxCnt(&info->channel)) + sDisTransmit(&info->channel); +} + +static void rp_start(struct tty_struct *tty) +{ + struct r_port *info = tty->driver_data; + +#ifdef ROCKET_DEBUG_FLOW + printk(KERN_INFO "start %s: %d %d....\n", tty->name, + info->xmit_cnt, info->xmit_fifo_room); +#endif + + if (rocket_paranoia_check(info, "rp_stop")) + return; + + sEnTransmit(&info->channel); + set_bit((info->aiop * 8) + info->chan, + (void *) &xmit_flags[info->board]); +} + +/* + * rp_wait_until_sent() --- wait until the transmitter is empty + */ +static void rp_wait_until_sent(struct tty_struct *tty, int timeout) +{ + struct r_port *info = tty->driver_data; + CHANNEL_t *cp; + unsigned long orig_jiffies; + int check_time, exit_time; + int txcnt; + + if (rocket_paranoia_check(info, "rp_wait_until_sent")) + return; + + cp = &info->channel; + + orig_jiffies = jiffies; +#ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT + printk(KERN_INFO "In %s(%d) (jiff=%lu)...\n", __func__, timeout, + jiffies); + printk(KERN_INFO "cps=%d...\n", info->cps); +#endif + while (1) { + txcnt = sGetTxCnt(cp); + if (!txcnt) { + if (sGetChanStatusLo(cp) & TXSHRMT) + break; + check_time = (HZ / info->cps) / 5; + } else { + check_time = HZ * txcnt / info->cps; + } + if (timeout) { + exit_time = orig_jiffies + timeout - jiffies; + if (exit_time <= 0) + break; + if (exit_time < check_time) + check_time = exit_time; + } + if (check_time == 0) + check_time = 1; +#ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT + printk(KERN_INFO "txcnt = %d (jiff=%lu,check=%d)...\n", txcnt, + jiffies, check_time); +#endif + msleep_interruptible(jiffies_to_msecs(check_time)); + if (signal_pending(current)) + break; + } + __set_current_state(TASK_RUNNING); +#ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT + printk(KERN_INFO "txcnt = %d (jiff=%lu)...done\n", txcnt, jiffies); +#endif +} + +/* + * rp_hangup() --- called by tty_hangup() when a hangup is signaled. + */ +static void rp_hangup(struct tty_struct *tty) +{ + CHANNEL_t *cp; + struct r_port *info = tty->driver_data; + unsigned long flags; + + if (rocket_paranoia_check(info, "rp_hangup")) + return; + +#if (defined(ROCKET_DEBUG_OPEN) || defined(ROCKET_DEBUG_HANGUP)) + printk(KERN_INFO "rp_hangup of ttyR%d...\n", info->line); +#endif + rp_flush_buffer(tty); + spin_lock_irqsave(&info->port.lock, flags); + if (info->port.count) + atomic_dec(&rp_num_ports_open); + clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]); + spin_unlock_irqrestore(&info->port.lock, flags); + + tty_port_hangup(&info->port); + + cp = &info->channel; + sDisRxFIFO(cp); + sDisTransmit(cp); + sDisInterrupts(cp, (TXINT_EN | MCINT_EN | RXINT_EN | SRCINT_EN | CHANINT_EN)); + sDisCTSFlowCtl(cp); + sDisTxSoftFlowCtl(cp); + sClrTxXOFF(cp); + tty_port_set_initialized(&info->port, 0); + + wake_up_interruptible(&info->port.open_wait); +} + +/* + * Exception handler - write char routine. The RocketPort driver uses a + * double-buffering strategy, with the twist that if the in-memory CPU + * buffer is empty, and there's space in the transmit FIFO, the + * writing routines will write directly to transmit FIFO. + * Write buffer and counters protected by spinlocks + */ +static int rp_put_char(struct tty_struct *tty, unsigned char ch) +{ + struct r_port *info = tty->driver_data; + CHANNEL_t *cp; + unsigned long flags; + + if (rocket_paranoia_check(info, "rp_put_char")) + return 0; + + /* + * Grab the port write mutex, locking out other processes that try to + * write to this port + */ + mutex_lock(&info->write_mtx); + +#ifdef ROCKET_DEBUG_WRITE + printk(KERN_INFO "rp_put_char %c...\n", ch); +#endif + + spin_lock_irqsave(&info->slock, flags); + cp = &info->channel; + + if (!tty->stopped && info->xmit_fifo_room == 0) + info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp); + + if (tty->stopped || info->xmit_fifo_room == 0 || info->xmit_cnt != 0) { + info->xmit_buf[info->xmit_head++] = ch; + info->xmit_head &= XMIT_BUF_SIZE - 1; + info->xmit_cnt++; + set_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]); + } else { + sOutB(sGetTxRxDataIO(cp), ch); + info->xmit_fifo_room--; + } + spin_unlock_irqrestore(&info->slock, flags); + mutex_unlock(&info->write_mtx); + return 1; +} + +/* + * Exception handler - write routine, called when user app writes to the device. + * A per port write mutex is used to protect from another process writing to + * this port at the same time. This other process could be running on the other CPU + * or get control of the CPU if the copy_from_user() blocks due to a page fault (swapped out). + * Spinlocks protect the info xmit members. + */ +static int rp_write(struct tty_struct *tty, + const unsigned char *buf, int count) +{ + struct r_port *info = tty->driver_data; + CHANNEL_t *cp; + const unsigned char *b; + int c, retval = 0; + unsigned long flags; + + if (count <= 0 || rocket_paranoia_check(info, "rp_write")) + return 0; + + if (mutex_lock_interruptible(&info->write_mtx)) + return -ERESTARTSYS; + +#ifdef ROCKET_DEBUG_WRITE + printk(KERN_INFO "rp_write %d chars...\n", count); +#endif + cp = &info->channel; + + if (!tty->stopped && info->xmit_fifo_room < count) + info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp); + + /* + * If the write queue for the port is empty, and there is FIFO space, stuff bytes + * into FIFO. Use the write queue for temp storage. + */ + if (!tty->stopped && info->xmit_cnt == 0 && info->xmit_fifo_room > 0) { + c = min(count, info->xmit_fifo_room); + b = buf; + + /* Push data into FIFO, 2 bytes at a time */ + sOutStrW(sGetTxRxDataIO(cp), (unsigned short *) b, c / 2); + + /* If there is a byte remaining, write it */ + if (c & 1) + sOutB(sGetTxRxDataIO(cp), b[c - 1]); + + retval += c; + buf += c; + count -= c; + + spin_lock_irqsave(&info->slock, flags); + info->xmit_fifo_room -= c; + spin_unlock_irqrestore(&info->slock, flags); + } + + /* If count is zero, we wrote it all and are done */ + if (!count) + goto end; + + /* Write remaining data into the port's xmit_buf */ + while (1) { + /* Hung up ? */ + if (!tty_port_active(&info->port)) + goto end; + c = min(count, XMIT_BUF_SIZE - info->xmit_cnt - 1); + c = min(c, XMIT_BUF_SIZE - info->xmit_head); + if (c <= 0) + break; + + b = buf; + memcpy(info->xmit_buf + info->xmit_head, b, c); + + spin_lock_irqsave(&info->slock, flags); + info->xmit_head = + (info->xmit_head + c) & (XMIT_BUF_SIZE - 1); + info->xmit_cnt += c; + spin_unlock_irqrestore(&info->slock, flags); + + buf += c; + count -= c; + retval += c; + } + + if ((retval > 0) && !tty->stopped) + set_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]); + +end: + if (info->xmit_cnt < WAKEUP_CHARS) { + tty_wakeup(tty); +#ifdef ROCKETPORT_HAVE_POLL_WAIT + wake_up_interruptible(&tty->poll_wait); +#endif + } + mutex_unlock(&info->write_mtx); + return retval; +} + +/* + * Return the number of characters that can be sent. We estimate + * only using the in-memory transmit buffer only, and ignore the + * potential space in the transmit FIFO. + */ +static int rp_write_room(struct tty_struct *tty) +{ + struct r_port *info = tty->driver_data; + int ret; + + if (rocket_paranoia_check(info, "rp_write_room")) + return 0; + + ret = XMIT_BUF_SIZE - info->xmit_cnt - 1; + if (ret < 0) + ret = 0; +#ifdef ROCKET_DEBUG_WRITE + printk(KERN_INFO "rp_write_room returns %d...\n", ret); +#endif + return ret; +} + +/* + * Return the number of characters in the buffer. Again, this only + * counts those characters in the in-memory transmit buffer. + */ +static int rp_chars_in_buffer(struct tty_struct *tty) +{ + struct r_port *info = tty->driver_data; + + if (rocket_paranoia_check(info, "rp_chars_in_buffer")) + return 0; + +#ifdef ROCKET_DEBUG_WRITE + printk(KERN_INFO "rp_chars_in_buffer returns %d...\n", info->xmit_cnt); +#endif + return info->xmit_cnt; +} + +/* + * Flushes the TX fifo for a port, deletes data in the xmit_buf stored in the + * r_port struct for the port. Note that spinlock are used to protect info members, + * do not call this function if the spinlock is already held. + */ +static void rp_flush_buffer(struct tty_struct *tty) +{ + struct r_port *info = tty->driver_data; + CHANNEL_t *cp; + unsigned long flags; + + if (rocket_paranoia_check(info, "rp_flush_buffer")) + return; + + spin_lock_irqsave(&info->slock, flags); + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + spin_unlock_irqrestore(&info->slock, flags); + +#ifdef ROCKETPORT_HAVE_POLL_WAIT + wake_up_interruptible(&tty->poll_wait); +#endif + tty_wakeup(tty); + + cp = &info->channel; + sFlushTxFIFO(cp); +} + +#ifdef CONFIG_PCI + +static const struct pci_device_id rocket_pci_ids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP4QUAD) }, + { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP8OCTA) }, + { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_URP8OCTA) }, + { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP8INTF) }, + { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_URP8INTF) }, + { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP8J) }, + { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP4J) }, + { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP8SNI) }, + { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP16SNI) }, + { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP16INTF) }, + { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_URP16INTF) }, + { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_CRP16INTF) }, + { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP32INTF) }, + { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_URP32INTF) }, + { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RPP4) }, + { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RPP8) }, + { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP2_232) }, + { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP2_422) }, + { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP6M) }, + { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP4M) }, + { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_UPCI_RM3_8PORT) }, + { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_UPCI_RM3_4PORT) }, + { } +}; +MODULE_DEVICE_TABLE(pci, rocket_pci_ids); + +/* Resets the speaker controller on RocketModem II and III devices */ +static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model) +{ + ByteIO_t addr; + + /* RocketModem II speaker control is at the 8th port location of offset 0x40 */ + if ((model == MODEL_RP4M) || (model == MODEL_RP6M)) { + addr = CtlP->AiopIO[0] + 0x4F; + sOutB(addr, 0); + } + + /* RocketModem III speaker control is at the 1st port location of offset 0x80 */ + if ((model == MODEL_UPCI_RM3_8PORT) + || (model == MODEL_UPCI_RM3_4PORT)) { + addr = CtlP->AiopIO[0] + 0x88; + sOutB(addr, 0); + } +} + +/*************************************************************************** +Function: sPCIInitController +Purpose: Initialization of controller global registers and controller + structure. +Call: sPCIInitController(CtlP,CtlNum,AiopIOList,AiopIOListSize, + IRQNum,Frequency,PeriodicOnly) + CONTROLLER_T *CtlP; Ptr to controller structure + int CtlNum; Controller number + ByteIO_t *AiopIOList; List of I/O addresses for each AIOP. + This list must be in the order the AIOPs will be found on the + controller. Once an AIOP in the list is not found, it is + assumed that there are no more AIOPs on the controller. + int AiopIOListSize; Number of addresses in AiopIOList + int IRQNum; Interrupt Request number. Can be any of the following: + 0: Disable global interrupts + 3: IRQ 3 + 4: IRQ 4 + 5: IRQ 5 + 9: IRQ 9 + 10: IRQ 10 + 11: IRQ 11 + 12: IRQ 12 + 15: IRQ 15 + Byte_t Frequency: A flag identifying the frequency + of the periodic interrupt, can be any one of the following: + FREQ_DIS - periodic interrupt disabled + FREQ_137HZ - 137 Hertz + FREQ_69HZ - 69 Hertz + FREQ_34HZ - 34 Hertz + FREQ_17HZ - 17 Hertz + FREQ_9HZ - 9 Hertz + FREQ_4HZ - 4 Hertz + If IRQNum is set to 0 the Frequency parameter is + overidden, it is forced to a value of FREQ_DIS. + int PeriodicOnly: 1 if all interrupts except the periodic + interrupt are to be blocked. + 0 is both the periodic interrupt and + other channel interrupts are allowed. + If IRQNum is set to 0 the PeriodicOnly parameter is + overidden, it is forced to a value of 0. +Return: int: Number of AIOPs on the controller, or CTLID_NULL if controller + initialization failed. + +Comments: + If periodic interrupts are to be disabled but AIOP interrupts + are allowed, set Frequency to FREQ_DIS and PeriodicOnly to 0. + + If interrupts are to be completely disabled set IRQNum to 0. + + Setting Frequency to FREQ_DIS and PeriodicOnly to 1 is an + invalid combination. + + This function performs initialization of global interrupt modes, + but it does not actually enable global interrupts. To enable + and disable global interrupts use functions sEnGlobalInt() and + sDisGlobalInt(). Enabling of global interrupts is normally not + done until all other initializations are complete. + + Even if interrupts are globally enabled, they must also be + individually enabled for each channel that is to generate + interrupts. + +Warnings: No range checking on any of the parameters is done. + + No context switches are allowed while executing this function. + + After this function all AIOPs on the controller are disabled, + they can be enabled with sEnAiop(). +*/ +static int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum, + ByteIO_t * AiopIOList, int AiopIOListSize, + WordIO_t ConfigIO, int IRQNum, Byte_t Frequency, + int PeriodicOnly, int altChanRingIndicator, + int UPCIRingInd) +{ + int i; + ByteIO_t io; + + CtlP->AltChanRingIndicator = altChanRingIndicator; + CtlP->UPCIRingInd = UPCIRingInd; + CtlP->CtlNum = CtlNum; + CtlP->CtlID = CTLID_0001; /* controller release 1 */ + CtlP->BusType = isPCI; /* controller release 1 */ + + if (ConfigIO) { + CtlP->isUPCI = 1; + CtlP->PCIIO = ConfigIO + _PCI_9030_INT_CTRL; + CtlP->PCIIO2 = ConfigIO + _PCI_9030_GPIO_CTRL; + CtlP->AiopIntrBits = upci_aiop_intr_bits; + } else { + CtlP->isUPCI = 0; + CtlP->PCIIO = + (WordIO_t) ((ByteIO_t) AiopIOList[0] + _PCI_INT_FUNC); + CtlP->AiopIntrBits = aiop_intr_bits; + } + + sPCIControllerEOI(CtlP); /* clear EOI if warm init */ + /* Init AIOPs */ + CtlP->NumAiop = 0; + for (i = 0; i < AiopIOListSize; i++) { + io = AiopIOList[i]; + CtlP->AiopIO[i] = (WordIO_t) io; + CtlP->AiopIntChanIO[i] = io + _INT_CHAN; + + CtlP->AiopID[i] = sReadAiopID(io); /* read AIOP ID */ + if (CtlP->AiopID[i] == AIOPID_NULL) /* if AIOP does not exist */ + break; /* done looking for AIOPs */ + + CtlP->AiopNumChan[i] = sReadAiopNumChan((WordIO_t) io); /* num channels in AIOP */ + sOutW((WordIO_t) io + _INDX_ADDR, _CLK_PRE); /* clock prescaler */ + sOutB(io + _INDX_DATA, sClockPrescale); + CtlP->NumAiop++; /* bump count of AIOPs */ + } + + if (CtlP->NumAiop == 0) + return (-1); + else + return (CtlP->NumAiop); +} + +/* + * Called when a PCI card is found. Retrieves and stores model information, + * init's aiopic and serial port hardware. + * Inputs: i is the board number (0-n) + */ +static __init int register_PCI(int i, struct pci_dev *dev) +{ + int num_aiops, aiop, max_num_aiops, chan; + unsigned int aiopio[MAX_AIOPS_PER_BOARD]; + CONTROLLER_t *ctlp; + + int fast_clock = 0; + int altChanRingIndicator = 0; + int ports_per_aiop = 8; + WordIO_t ConfigIO = 0; + ByteIO_t UPCIRingInd = 0; + + if (!dev || !pci_match_id(rocket_pci_ids, dev) || + pci_enable_device(dev) || i >= NUM_BOARDS) + return 0; + + rcktpt_io_addr[i] = pci_resource_start(dev, 0); + + rcktpt_type[i] = ROCKET_TYPE_NORMAL; + rocketModel[i].loadrm2 = 0; + rocketModel[i].startingPortNumber = nextLineNumber; + + /* Depending on the model, set up some config variables */ + switch (dev->device) { + case PCI_DEVICE_ID_RP4QUAD: + max_num_aiops = 1; + ports_per_aiop = 4; + rocketModel[i].model = MODEL_RP4QUAD; + strcpy(rocketModel[i].modelString, "RocketPort 4 port w/quad cable"); + rocketModel[i].numPorts = 4; + break; + case PCI_DEVICE_ID_RP8OCTA: + max_num_aiops = 1; + rocketModel[i].model = MODEL_RP8OCTA; + strcpy(rocketModel[i].modelString, "RocketPort 8 port w/octa cable"); + rocketModel[i].numPorts = 8; + break; + case PCI_DEVICE_ID_URP8OCTA: + max_num_aiops = 1; + rocketModel[i].model = MODEL_UPCI_RP8OCTA; + strcpy(rocketModel[i].modelString, "RocketPort UPCI 8 port w/octa cable"); + rocketModel[i].numPorts = 8; + break; + case PCI_DEVICE_ID_RP8INTF: + max_num_aiops = 1; + rocketModel[i].model = MODEL_RP8INTF; + strcpy(rocketModel[i].modelString, "RocketPort 8 port w/external I/F"); + rocketModel[i].numPorts = 8; + break; + case PCI_DEVICE_ID_URP8INTF: + max_num_aiops = 1; + rocketModel[i].model = MODEL_UPCI_RP8INTF; + strcpy(rocketModel[i].modelString, "RocketPort UPCI 8 port w/external I/F"); + rocketModel[i].numPorts = 8; + break; + case PCI_DEVICE_ID_RP8J: + max_num_aiops = 1; + rocketModel[i].model = MODEL_RP8J; + strcpy(rocketModel[i].modelString, "RocketPort 8 port w/RJ11 connectors"); + rocketModel[i].numPorts = 8; + break; + case PCI_DEVICE_ID_RP4J: + max_num_aiops = 1; + ports_per_aiop = 4; + rocketModel[i].model = MODEL_RP4J; + strcpy(rocketModel[i].modelString, "RocketPort 4 port w/RJ45 connectors"); + rocketModel[i].numPorts = 4; + break; + case PCI_DEVICE_ID_RP8SNI: + max_num_aiops = 1; + rocketModel[i].model = MODEL_RP8SNI; + strcpy(rocketModel[i].modelString, "RocketPort 8 port w/ custom DB78"); + rocketModel[i].numPorts = 8; + break; + case PCI_DEVICE_ID_RP16SNI: + max_num_aiops = 2; + rocketModel[i].model = MODEL_RP16SNI; + strcpy(rocketModel[i].modelString, "RocketPort 16 port w/ custom DB78"); + rocketModel[i].numPorts = 16; + break; + case PCI_DEVICE_ID_RP16INTF: + max_num_aiops = 2; + rocketModel[i].model = MODEL_RP16INTF; + strcpy(rocketModel[i].modelString, "RocketPort 16 port w/external I/F"); + rocketModel[i].numPorts = 16; + break; + case PCI_DEVICE_ID_URP16INTF: + max_num_aiops = 2; + rocketModel[i].model = MODEL_UPCI_RP16INTF; + strcpy(rocketModel[i].modelString, "RocketPort UPCI 16 port w/external I/F"); + rocketModel[i].numPorts = 16; + break; + case PCI_DEVICE_ID_CRP16INTF: + max_num_aiops = 2; + rocketModel[i].model = MODEL_CPCI_RP16INTF; + strcpy(rocketModel[i].modelString, "RocketPort Compact PCI 16 port w/external I/F"); + rocketModel[i].numPorts = 16; + break; + case PCI_DEVICE_ID_RP32INTF: + max_num_aiops = 4; + rocketModel[i].model = MODEL_RP32INTF; + strcpy(rocketModel[i].modelString, "RocketPort 32 port w/external I/F"); + rocketModel[i].numPorts = 32; + break; + case PCI_DEVICE_ID_URP32INTF: + max_num_aiops = 4; + rocketModel[i].model = MODEL_UPCI_RP32INTF; + strcpy(rocketModel[i].modelString, "RocketPort UPCI 32 port w/external I/F"); + rocketModel[i].numPorts = 32; + break; + case PCI_DEVICE_ID_RPP4: + max_num_aiops = 1; + ports_per_aiop = 4; + altChanRingIndicator++; + fast_clock++; + rocketModel[i].model = MODEL_RPP4; + strcpy(rocketModel[i].modelString, "RocketPort Plus 4 port"); + rocketModel[i].numPorts = 4; + break; + case PCI_DEVICE_ID_RPP8: + max_num_aiops = 2; + ports_per_aiop = 4; + altChanRingIndicator++; + fast_clock++; + rocketModel[i].model = MODEL_RPP8; + strcpy(rocketModel[i].modelString, "RocketPort Plus 8 port"); + rocketModel[i].numPorts = 8; + break; + case PCI_DEVICE_ID_RP2_232: + max_num_aiops = 1; + ports_per_aiop = 2; + altChanRingIndicator++; + fast_clock++; + rocketModel[i].model = MODEL_RP2_232; + strcpy(rocketModel[i].modelString, "RocketPort Plus 2 port RS232"); + rocketModel[i].numPorts = 2; + break; + case PCI_DEVICE_ID_RP2_422: + max_num_aiops = 1; + ports_per_aiop = 2; + altChanRingIndicator++; + fast_clock++; + rocketModel[i].model = MODEL_RP2_422; + strcpy(rocketModel[i].modelString, "RocketPort Plus 2 port RS422"); + rocketModel[i].numPorts = 2; + break; + case PCI_DEVICE_ID_RP6M: + + max_num_aiops = 1; + ports_per_aiop = 6; + + /* If revision is 1, the rocketmodem flash must be loaded. + * If it is 2 it is a "socketed" version. */ + if (dev->revision == 1) { + rcktpt_type[i] = ROCKET_TYPE_MODEMII; + rocketModel[i].loadrm2 = 1; + } else { + rcktpt_type[i] = ROCKET_TYPE_MODEM; + } + + rocketModel[i].model = MODEL_RP6M; + strcpy(rocketModel[i].modelString, "RocketModem 6 port"); + rocketModel[i].numPorts = 6; + break; + case PCI_DEVICE_ID_RP4M: + max_num_aiops = 1; + ports_per_aiop = 4; + if (dev->revision == 1) { + rcktpt_type[i] = ROCKET_TYPE_MODEMII; + rocketModel[i].loadrm2 = 1; + } else { + rcktpt_type[i] = ROCKET_TYPE_MODEM; + } + + rocketModel[i].model = MODEL_RP4M; + strcpy(rocketModel[i].modelString, "RocketModem 4 port"); + rocketModel[i].numPorts = 4; + break; + default: + max_num_aiops = 0; + break; + } + + /* + * Check for UPCI boards. + */ + + switch (dev->device) { + case PCI_DEVICE_ID_URP32INTF: + case PCI_DEVICE_ID_URP8INTF: + case PCI_DEVICE_ID_URP16INTF: + case PCI_DEVICE_ID_CRP16INTF: + case PCI_DEVICE_ID_URP8OCTA: + rcktpt_io_addr[i] = pci_resource_start(dev, 2); + ConfigIO = pci_resource_start(dev, 1); + if (dev->device == PCI_DEVICE_ID_URP8OCTA) { + UPCIRingInd = rcktpt_io_addr[i] + _PCI_9030_RING_IND; + + /* + * Check for octa or quad cable. + */ + if (! + (sInW(ConfigIO + _PCI_9030_GPIO_CTRL) & + PCI_GPIO_CTRL_8PORT)) { + ports_per_aiop = 4; + rocketModel[i].numPorts = 4; + } + } + break; + case PCI_DEVICE_ID_UPCI_RM3_8PORT: + max_num_aiops = 1; + rocketModel[i].model = MODEL_UPCI_RM3_8PORT; + strcpy(rocketModel[i].modelString, "RocketModem III 8 port"); + rocketModel[i].numPorts = 8; + rcktpt_io_addr[i] = pci_resource_start(dev, 2); + UPCIRingInd = rcktpt_io_addr[i] + _PCI_9030_RING_IND; + ConfigIO = pci_resource_start(dev, 1); + rcktpt_type[i] = ROCKET_TYPE_MODEMIII; + break; + case PCI_DEVICE_ID_UPCI_RM3_4PORT: + max_num_aiops = 1; + rocketModel[i].model = MODEL_UPCI_RM3_4PORT; + strcpy(rocketModel[i].modelString, "RocketModem III 4 port"); + rocketModel[i].numPorts = 4; + rcktpt_io_addr[i] = pci_resource_start(dev, 2); + UPCIRingInd = rcktpt_io_addr[i] + _PCI_9030_RING_IND; + ConfigIO = pci_resource_start(dev, 1); + rcktpt_type[i] = ROCKET_TYPE_MODEMIII; + break; + default: + break; + } + + if (fast_clock) { + sClockPrescale = 0x12; /* mod 2 (divide by 3) */ + rp_baud_base[i] = 921600; + } else { + /* + * If support_low_speed is set, use the slow clock + * prescale, which supports 50 bps + */ + if (support_low_speed) { + /* mod 9 (divide by 10) prescale */ + sClockPrescale = 0x19; + rp_baud_base[i] = 230400; + } else { + /* mod 4 (divide by 5) prescale */ + sClockPrescale = 0x14; + rp_baud_base[i] = 460800; + } + } + + for (aiop = 0; aiop < max_num_aiops; aiop++) + aiopio[aiop] = rcktpt_io_addr[i] + (aiop * 0x40); + ctlp = sCtlNumToCtlPtr(i); + num_aiops = sPCIInitController(ctlp, i, aiopio, max_num_aiops, ConfigIO, 0, FREQ_DIS, 0, altChanRingIndicator, UPCIRingInd); + for (aiop = 0; aiop < max_num_aiops; aiop++) + ctlp->AiopNumChan[aiop] = ports_per_aiop; + + dev_info(&dev->dev, "comtrol PCI controller #%d found at " + "address %04lx, %d AIOP(s) (%s), creating ttyR%d - %ld\n", + i, rcktpt_io_addr[i], num_aiops, rocketModel[i].modelString, + rocketModel[i].startingPortNumber, + rocketModel[i].startingPortNumber + rocketModel[i].numPorts-1); + + if (num_aiops <= 0) { + rcktpt_io_addr[i] = 0; + return (0); + } + is_PCI[i] = 1; + + /* Reset the AIOPIC, init the serial ports */ + for (aiop = 0; aiop < num_aiops; aiop++) { + sResetAiopByNum(ctlp, aiop); + for (chan = 0; chan < ports_per_aiop; chan++) + init_r_port(i, aiop, chan, dev); + } + + /* Rocket modems must be reset */ + if ((rcktpt_type[i] == ROCKET_TYPE_MODEM) || + (rcktpt_type[i] == ROCKET_TYPE_MODEMII) || + (rcktpt_type[i] == ROCKET_TYPE_MODEMIII)) { + for (chan = 0; chan < ports_per_aiop; chan++) + sPCIModemReset(ctlp, chan, 1); + msleep(500); + for (chan = 0; chan < ports_per_aiop; chan++) + sPCIModemReset(ctlp, chan, 0); + msleep(500); + rmSpeakerReset(ctlp, rocketModel[i].model); + } + return (1); +} + +/* + * Probes for PCI cards, inits them if found + * Input: board_found = number of ISA boards already found, or the + * starting board number + * Returns: Number of PCI boards found + */ +static int __init init_PCI(int boards_found) +{ + struct pci_dev *dev = NULL; + int count = 0; + + /* Work through the PCI device list, pulling out ours */ + while ((dev = pci_get_device(PCI_VENDOR_ID_RP, PCI_ANY_ID, dev))) { + if (register_PCI(count + boards_found, dev)) + count++; + } + return (count); +} + +#endif /* CONFIG_PCI */ + +/* + * Probes for ISA cards + * Input: i = the board number to look for + * Returns: 1 if board found, 0 else + */ +static int __init init_ISA(int i) +{ + int num_aiops, num_chan = 0, total_num_chan = 0; + int aiop, chan; + unsigned int aiopio[MAX_AIOPS_PER_BOARD]; + CONTROLLER_t *ctlp; + char *type_string; + + /* If io_addr is zero, no board configured */ + if (rcktpt_io_addr[i] == 0) + return (0); + + /* Reserve the IO region */ + if (!request_region(rcktpt_io_addr[i], 64, "Comtrol RocketPort")) { + printk(KERN_ERR "Unable to reserve IO region for configured " + "ISA RocketPort at address 0x%lx, board not " + "installed...\n", rcktpt_io_addr[i]); + rcktpt_io_addr[i] = 0; + return (0); + } + + ctlp = sCtlNumToCtlPtr(i); + + ctlp->boardType = rcktpt_type[i]; + + switch (rcktpt_type[i]) { + case ROCKET_TYPE_PC104: + type_string = "(PC104)"; + break; + case ROCKET_TYPE_MODEM: + type_string = "(RocketModem)"; + break; + case ROCKET_TYPE_MODEMII: + type_string = "(RocketModem II)"; + break; + default: + type_string = ""; + break; + } + + /* + * If support_low_speed is set, use the slow clock prescale, + * which supports 50 bps + */ + if (support_low_speed) { + sClockPrescale = 0x19; /* mod 9 (divide by 10) prescale */ + rp_baud_base[i] = 230400; + } else { + sClockPrescale = 0x14; /* mod 4 (divide by 5) prescale */ + rp_baud_base[i] = 460800; + } + + for (aiop = 0; aiop < MAX_AIOPS_PER_BOARD; aiop++) + aiopio[aiop] = rcktpt_io_addr[i] + (aiop * 0x400); + + num_aiops = sInitController(ctlp, i, controller + (i * 0x400), aiopio, MAX_AIOPS_PER_BOARD, 0, FREQ_DIS, 0); + + if (ctlp->boardType == ROCKET_TYPE_PC104) { + sEnAiop(ctlp, 2); /* only one AIOPIC, but these */ + sEnAiop(ctlp, 3); /* CSels used for other stuff */ + } + + /* If something went wrong initing the AIOP's release the ISA IO memory */ + if (num_aiops <= 0) { + release_region(rcktpt_io_addr[i], 64); + rcktpt_io_addr[i] = 0; + return (0); + } + + rocketModel[i].startingPortNumber = nextLineNumber; + + for (aiop = 0; aiop < num_aiops; aiop++) { + sResetAiopByNum(ctlp, aiop); + sEnAiop(ctlp, aiop); + num_chan = sGetAiopNumChan(ctlp, aiop); + total_num_chan += num_chan; + for (chan = 0; chan < num_chan; chan++) + init_r_port(i, aiop, chan, NULL); + } + is_PCI[i] = 0; + if ((rcktpt_type[i] == ROCKET_TYPE_MODEM) || (rcktpt_type[i] == ROCKET_TYPE_MODEMII)) { + num_chan = sGetAiopNumChan(ctlp, 0); + total_num_chan = num_chan; + for (chan = 0; chan < num_chan; chan++) + sModemReset(ctlp, chan, 1); + msleep(500); + for (chan = 0; chan < num_chan; chan++) + sModemReset(ctlp, chan, 0); + msleep(500); + strcpy(rocketModel[i].modelString, "RocketModem ISA"); + } else { + strcpy(rocketModel[i].modelString, "RocketPort ISA"); + } + rocketModel[i].numPorts = total_num_chan; + rocketModel[i].model = MODEL_ISA; + + printk(KERN_INFO "RocketPort ISA card #%d found at 0x%lx - %d AIOPs %s\n", + i, rcktpt_io_addr[i], num_aiops, type_string); + + printk(KERN_INFO "Installing %s, creating /dev/ttyR%d - %ld\n", + rocketModel[i].modelString, + rocketModel[i].startingPortNumber, + rocketModel[i].startingPortNumber + + rocketModel[i].numPorts - 1); + + return (1); +} + +static const struct tty_operations rocket_ops = { + .open = rp_open, + .close = rp_close, + .write = rp_write, + .put_char = rp_put_char, + .write_room = rp_write_room, + .chars_in_buffer = rp_chars_in_buffer, + .flush_buffer = rp_flush_buffer, + .ioctl = rp_ioctl, + .throttle = rp_throttle, + .unthrottle = rp_unthrottle, + .set_termios = rp_set_termios, + .stop = rp_stop, + .start = rp_start, + .hangup = rp_hangup, + .break_ctl = rp_break, + .send_xchar = rp_send_xchar, + .wait_until_sent = rp_wait_until_sent, + .tiocmget = rp_tiocmget, + .tiocmset = rp_tiocmset, +}; + +static const struct tty_port_operations rocket_port_ops = { + .carrier_raised = carrier_raised, + .dtr_rts = dtr_rts, +}; + +/* + * The module "startup" routine; it's run when the module is loaded. + */ +static int __init rp_init(void) +{ + int ret = -ENOMEM, pci_boards_found, isa_boards_found, i; + + printk(KERN_INFO "RocketPort device driver module, version %s, %s\n", + ROCKET_VERSION, ROCKET_DATE); + + rocket_driver = alloc_tty_driver(MAX_RP_PORTS); + if (!rocket_driver) + goto err; + + /* + * If board 1 is non-zero, there is at least one ISA configured. If controller is + * zero, use the default controller IO address of board1 + 0x40. + */ + if (board1) { + if (controller == 0) + controller = board1 + 0x40; + } else { + controller = 0; /* Used as a flag, meaning no ISA boards */ + } + + /* If an ISA card is configured, reserve the 4 byte IO space for the Mudbac controller */ + if (controller && (!request_region(controller, 4, "Comtrol RocketPort"))) { + printk(KERN_ERR "Unable to reserve IO region for first " + "configured ISA RocketPort controller 0x%lx. " + "Driver exiting\n", controller); + ret = -EBUSY; + goto err_tty; + } + + /* Store ISA variable retrieved from command line or .conf file. */ + rcktpt_io_addr[0] = board1; + rcktpt_io_addr[1] = board2; + rcktpt_io_addr[2] = board3; + rcktpt_io_addr[3] = board4; + + rcktpt_type[0] = modem1 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL; + rcktpt_type[0] = pc104_1[0] ? ROCKET_TYPE_PC104 : rcktpt_type[0]; + rcktpt_type[1] = modem2 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL; + rcktpt_type[1] = pc104_2[0] ? ROCKET_TYPE_PC104 : rcktpt_type[1]; + rcktpt_type[2] = modem3 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL; + rcktpt_type[2] = pc104_3[0] ? ROCKET_TYPE_PC104 : rcktpt_type[2]; + rcktpt_type[3] = modem4 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL; + rcktpt_type[3] = pc104_4[0] ? ROCKET_TYPE_PC104 : rcktpt_type[3]; + + /* + * Set up the tty driver structure and then register this + * driver with the tty layer. + */ + + rocket_driver->flags = TTY_DRIVER_DYNAMIC_DEV; + rocket_driver->name = "ttyR"; + rocket_driver->driver_name = "Comtrol RocketPort"; + rocket_driver->major = TTY_ROCKET_MAJOR; + rocket_driver->minor_start = 0; + rocket_driver->type = TTY_DRIVER_TYPE_SERIAL; + rocket_driver->subtype = SERIAL_TYPE_NORMAL; + rocket_driver->init_termios = tty_std_termios; + rocket_driver->init_termios.c_cflag = + B9600 | CS8 | CREAD | HUPCL | CLOCAL; + rocket_driver->init_termios.c_ispeed = 9600; + rocket_driver->init_termios.c_ospeed = 9600; +#ifdef ROCKET_SOFT_FLOW + rocket_driver->flags |= TTY_DRIVER_REAL_RAW; +#endif + tty_set_operations(rocket_driver, &rocket_ops); + + ret = tty_register_driver(rocket_driver); + if (ret < 0) { + printk(KERN_ERR "Couldn't install tty RocketPort driver\n"); + goto err_controller; + } + +#ifdef ROCKET_DEBUG_OPEN + printk(KERN_INFO "RocketPort driver is major %d\n", rocket_driver.major); +#endif + + /* + * OK, let's probe each of the controllers looking for boards. Any boards found + * will be initialized here. + */ + isa_boards_found = 0; + pci_boards_found = 0; + + for (i = 0; i < NUM_BOARDS; i++) { + if (init_ISA(i)) + isa_boards_found++; + } + +#ifdef CONFIG_PCI + if (isa_boards_found < NUM_BOARDS) + pci_boards_found = init_PCI(isa_boards_found); +#endif + + max_board = pci_boards_found + isa_boards_found; + + if (max_board == 0) { + printk(KERN_ERR "No rocketport ports found; unloading driver\n"); + ret = -ENXIO; + goto err_ttyu; + } + + return 0; +err_ttyu: + tty_unregister_driver(rocket_driver); +err_controller: + if (controller) + release_region(controller, 4); +err_tty: + put_tty_driver(rocket_driver); +err: + return ret; +} + + +static void rp_cleanup_module(void) +{ + int retval; + int i; + + del_timer_sync(&rocket_timer); + + retval = tty_unregister_driver(rocket_driver); + if (retval) + printk(KERN_ERR "Error %d while trying to unregister " + "rocketport driver\n", -retval); + + for (i = 0; i < MAX_RP_PORTS; i++) + if (rp_table[i]) { + tty_unregister_device(rocket_driver, i); + tty_port_destroy(&rp_table[i]->port); + kfree(rp_table[i]); + } + + put_tty_driver(rocket_driver); + + for (i = 0; i < NUM_BOARDS; i++) { + if (rcktpt_io_addr[i] <= 0 || is_PCI[i]) + continue; + release_region(rcktpt_io_addr[i], 64); + } + if (controller) + release_region(controller, 4); +} + +/*************************************************************************** +Function: sInitController +Purpose: Initialization of controller global registers and controller + structure. +Call: sInitController(CtlP,CtlNum,MudbacIO,AiopIOList,AiopIOListSize, + IRQNum,Frequency,PeriodicOnly) + CONTROLLER_T *CtlP; Ptr to controller structure + int CtlNum; Controller number + ByteIO_t MudbacIO; Mudbac base I/O address. + ByteIO_t *AiopIOList; List of I/O addresses for each AIOP. + This list must be in the order the AIOPs will be found on the + controller. Once an AIOP in the list is not found, it is + assumed that there are no more AIOPs on the controller. + int AiopIOListSize; Number of addresses in AiopIOList + int IRQNum; Interrupt Request number. Can be any of the following: + 0: Disable global interrupts + 3: IRQ 3 + 4: IRQ 4 + 5: IRQ 5 + 9: IRQ 9 + 10: IRQ 10 + 11: IRQ 11 + 12: IRQ 12 + 15: IRQ 15 + Byte_t Frequency: A flag identifying the frequency + of the periodic interrupt, can be any one of the following: + FREQ_DIS - periodic interrupt disabled + FREQ_137HZ - 137 Hertz + FREQ_69HZ - 69 Hertz + FREQ_34HZ - 34 Hertz + FREQ_17HZ - 17 Hertz + FREQ_9HZ - 9 Hertz + FREQ_4HZ - 4 Hertz + If IRQNum is set to 0 the Frequency parameter is + overidden, it is forced to a value of FREQ_DIS. + int PeriodicOnly: 1 if all interrupts except the periodic + interrupt are to be blocked. + 0 is both the periodic interrupt and + other channel interrupts are allowed. + If IRQNum is set to 0 the PeriodicOnly parameter is + overidden, it is forced to a value of 0. +Return: int: Number of AIOPs on the controller, or CTLID_NULL if controller + initialization failed. + +Comments: + If periodic interrupts are to be disabled but AIOP interrupts + are allowed, set Frequency to FREQ_DIS and PeriodicOnly to 0. + + If interrupts are to be completely disabled set IRQNum to 0. + + Setting Frequency to FREQ_DIS and PeriodicOnly to 1 is an + invalid combination. + + This function performs initialization of global interrupt modes, + but it does not actually enable global interrupts. To enable + and disable global interrupts use functions sEnGlobalInt() and + sDisGlobalInt(). Enabling of global interrupts is normally not + done until all other initializations are complete. + + Even if interrupts are globally enabled, they must also be + individually enabled for each channel that is to generate + interrupts. + +Warnings: No range checking on any of the parameters is done. + + No context switches are allowed while executing this function. + + After this function all AIOPs on the controller are disabled, + they can be enabled with sEnAiop(). +*/ +static int sInitController(CONTROLLER_T * CtlP, int CtlNum, ByteIO_t MudbacIO, + ByteIO_t * AiopIOList, int AiopIOListSize, + int IRQNum, Byte_t Frequency, int PeriodicOnly) +{ + int i; + ByteIO_t io; + int done; + + CtlP->AiopIntrBits = aiop_intr_bits; + CtlP->AltChanRingIndicator = 0; + CtlP->CtlNum = CtlNum; + CtlP->CtlID = CTLID_0001; /* controller release 1 */ + CtlP->BusType = isISA; + CtlP->MBaseIO = MudbacIO; + CtlP->MReg1IO = MudbacIO + 1; + CtlP->MReg2IO = MudbacIO + 2; + CtlP->MReg3IO = MudbacIO + 3; +#if 1 + CtlP->MReg2 = 0; /* interrupt disable */ + CtlP->MReg3 = 0; /* no periodic interrupts */ +#else + if (sIRQMap[IRQNum] == 0) { /* interrupts globally disabled */ + CtlP->MReg2 = 0; /* interrupt disable */ + CtlP->MReg3 = 0; /* no periodic interrupts */ + } else { + CtlP->MReg2 = sIRQMap[IRQNum]; /* set IRQ number */ + CtlP->MReg3 = Frequency; /* set frequency */ + if (PeriodicOnly) { /* periodic interrupt only */ + CtlP->MReg3 |= PERIODIC_ONLY; + } + } +#endif + sOutB(CtlP->MReg2IO, CtlP->MReg2); + sOutB(CtlP->MReg3IO, CtlP->MReg3); + sControllerEOI(CtlP); /* clear EOI if warm init */ + /* Init AIOPs */ + CtlP->NumAiop = 0; + for (i = done = 0; i < AiopIOListSize; i++) { + io = AiopIOList[i]; + CtlP->AiopIO[i] = (WordIO_t) io; + CtlP->AiopIntChanIO[i] = io + _INT_CHAN; + sOutB(CtlP->MReg2IO, CtlP->MReg2 | (i & 0x03)); /* AIOP index */ + sOutB(MudbacIO, (Byte_t) (io >> 6)); /* set up AIOP I/O in MUDBAC */ + if (done) + continue; + sEnAiop(CtlP, i); /* enable the AIOP */ + CtlP->AiopID[i] = sReadAiopID(io); /* read AIOP ID */ + if (CtlP->AiopID[i] == AIOPID_NULL) /* if AIOP does not exist */ + done = 1; /* done looking for AIOPs */ + else { + CtlP->AiopNumChan[i] = sReadAiopNumChan((WordIO_t) io); /* num channels in AIOP */ + sOutW((WordIO_t) io + _INDX_ADDR, _CLK_PRE); /* clock prescaler */ + sOutB(io + _INDX_DATA, sClockPrescale); + CtlP->NumAiop++; /* bump count of AIOPs */ + } + sDisAiop(CtlP, i); /* disable AIOP */ + } + + if (CtlP->NumAiop == 0) + return (-1); + else + return (CtlP->NumAiop); +} + +/*************************************************************************** +Function: sReadAiopID +Purpose: Read the AIOP idenfication number directly from an AIOP. +Call: sReadAiopID(io) + ByteIO_t io: AIOP base I/O address +Return: int: Flag AIOPID_XXXX if a valid AIOP is found, where X + is replace by an identifying number. + Flag AIOPID_NULL if no valid AIOP is found +Warnings: No context switches are allowed while executing this function. + +*/ +static int sReadAiopID(ByteIO_t io) +{ + Byte_t AiopID; /* ID byte from AIOP */ + + sOutB(io + _CMD_REG, RESET_ALL); /* reset AIOP */ + sOutB(io + _CMD_REG, 0x0); + AiopID = sInW(io + _CHN_STAT0) & 0x07; + if (AiopID == 0x06) + return (1); + else /* AIOP does not exist */ + return (-1); +} + +/*************************************************************************** +Function: sReadAiopNumChan +Purpose: Read the number of channels available in an AIOP directly from + an AIOP. +Call: sReadAiopNumChan(io) + WordIO_t io: AIOP base I/O address +Return: int: The number of channels available +Comments: The number of channels is determined by write/reads from identical + offsets within the SRAM address spaces for channels 0 and 4. + If the channel 4 space is mirrored to channel 0 it is a 4 channel + AIOP, otherwise it is an 8 channel. +Warnings: No context switches are allowed while executing this function. +*/ +static int sReadAiopNumChan(WordIO_t io) +{ + Word_t x; + static Byte_t R[4] = { 0x00, 0x00, 0x34, 0x12 }; + + /* write to chan 0 SRAM */ + out32((DWordIO_t) io + _INDX_ADDR, R); + sOutW(io + _INDX_ADDR, 0); /* read from SRAM, chan 0 */ + x = sInW(io + _INDX_DATA); + sOutW(io + _INDX_ADDR, 0x4000); /* read from SRAM, chan 4 */ + if (x != sInW(io + _INDX_DATA)) /* if different must be 8 chan */ + return (8); + else + return (4); +} + +/*************************************************************************** +Function: sInitChan +Purpose: Initialization of a channel and channel structure +Call: sInitChan(CtlP,ChP,AiopNum,ChanNum) + CONTROLLER_T *CtlP; Ptr to controller structure + CHANNEL_T *ChP; Ptr to channel structure + int AiopNum; AIOP number within controller + int ChanNum; Channel number within AIOP +Return: int: 1 if initialization succeeded, 0 if it fails because channel + number exceeds number of channels available in AIOP. +Comments: This function must be called before a channel can be used. +Warnings: No range checking on any of the parameters is done. + + No context switches are allowed while executing this function. +*/ +static int sInitChan(CONTROLLER_T * CtlP, CHANNEL_T * ChP, int AiopNum, + int ChanNum) +{ + int i; + WordIO_t AiopIO; + WordIO_t ChIOOff; + Byte_t *ChR; + Word_t ChOff; + static Byte_t R[4]; + int brd9600; + + if (ChanNum >= CtlP->AiopNumChan[AiopNum]) + return 0; /* exceeds num chans in AIOP */ + + /* Channel, AIOP, and controller identifiers */ + ChP->CtlP = CtlP; + ChP->ChanID = CtlP->AiopID[AiopNum]; + ChP->AiopNum = AiopNum; + ChP->ChanNum = ChanNum; + + /* Global direct addresses */ + AiopIO = CtlP->AiopIO[AiopNum]; + ChP->Cmd = (ByteIO_t) AiopIO + _CMD_REG; + ChP->IntChan = (ByteIO_t) AiopIO + _INT_CHAN; + ChP->IntMask = (ByteIO_t) AiopIO + _INT_MASK; + ChP->IndexAddr = (DWordIO_t) AiopIO + _INDX_ADDR; + ChP->IndexData = AiopIO + _INDX_DATA; + + /* Channel direct addresses */ + ChIOOff = AiopIO + ChP->ChanNum * 2; + ChP->TxRxData = ChIOOff + _TD0; + ChP->ChanStat = ChIOOff + _CHN_STAT0; + ChP->TxRxCount = ChIOOff + _FIFO_CNT0; + ChP->IntID = (ByteIO_t) AiopIO + ChP->ChanNum + _INT_ID0; + + /* Initialize the channel from the RData array */ + for (i = 0; i < RDATASIZE; i += 4) { + R[0] = RData[i]; + R[1] = RData[i + 1] + 0x10 * ChanNum; + R[2] = RData[i + 2]; + R[3] = RData[i + 3]; + out32(ChP->IndexAddr, R); + } + + ChR = ChP->R; + for (i = 0; i < RREGDATASIZE; i += 4) { + ChR[i] = RRegData[i]; + ChR[i + 1] = RRegData[i + 1] + 0x10 * ChanNum; + ChR[i + 2] = RRegData[i + 2]; + ChR[i + 3] = RRegData[i + 3]; + } + + /* Indexed registers */ + ChOff = (Word_t) ChanNum *0x1000; + + if (sClockPrescale == 0x14) + brd9600 = 47; + else + brd9600 = 23; + + ChP->BaudDiv[0] = (Byte_t) (ChOff + _BAUD); + ChP->BaudDiv[1] = (Byte_t) ((ChOff + _BAUD) >> 8); + ChP->BaudDiv[2] = (Byte_t) brd9600; + ChP->BaudDiv[3] = (Byte_t) (brd9600 >> 8); + out32(ChP->IndexAddr, ChP->BaudDiv); + + ChP->TxControl[0] = (Byte_t) (ChOff + _TX_CTRL); + ChP->TxControl[1] = (Byte_t) ((ChOff + _TX_CTRL) >> 8); + ChP->TxControl[2] = 0; + ChP->TxControl[3] = 0; + out32(ChP->IndexAddr, ChP->TxControl); + + ChP->RxControl[0] = (Byte_t) (ChOff + _RX_CTRL); + ChP->RxControl[1] = (Byte_t) ((ChOff + _RX_CTRL) >> 8); + ChP->RxControl[2] = 0; + ChP->RxControl[3] = 0; + out32(ChP->IndexAddr, ChP->RxControl); + + ChP->TxEnables[0] = (Byte_t) (ChOff + _TX_ENBLS); + ChP->TxEnables[1] = (Byte_t) ((ChOff + _TX_ENBLS) >> 8); + ChP->TxEnables[2] = 0; + ChP->TxEnables[3] = 0; + out32(ChP->IndexAddr, ChP->TxEnables); + + ChP->TxCompare[0] = (Byte_t) (ChOff + _TXCMP1); + ChP->TxCompare[1] = (Byte_t) ((ChOff + _TXCMP1) >> 8); + ChP->TxCompare[2] = 0; + ChP->TxCompare[3] = 0; + out32(ChP->IndexAddr, ChP->TxCompare); + + ChP->TxReplace1[0] = (Byte_t) (ChOff + _TXREP1B1); + ChP->TxReplace1[1] = (Byte_t) ((ChOff + _TXREP1B1) >> 8); + ChP->TxReplace1[2] = 0; + ChP->TxReplace1[3] = 0; + out32(ChP->IndexAddr, ChP->TxReplace1); + + ChP->TxReplace2[0] = (Byte_t) (ChOff + _TXREP2); + ChP->TxReplace2[1] = (Byte_t) ((ChOff + _TXREP2) >> 8); + ChP->TxReplace2[2] = 0; + ChP->TxReplace2[3] = 0; + out32(ChP->IndexAddr, ChP->TxReplace2); + + ChP->TxFIFOPtrs = ChOff + _TXF_OUTP; + ChP->TxFIFO = ChOff + _TX_FIFO; + + sOutB(ChP->Cmd, (Byte_t) ChanNum | RESTXFCNT); /* apply reset Tx FIFO count */ + sOutB(ChP->Cmd, (Byte_t) ChanNum); /* remove reset Tx FIFO count */ + sOutW((WordIO_t) ChP->IndexAddr, ChP->TxFIFOPtrs); /* clear Tx in/out ptrs */ + sOutW(ChP->IndexData, 0); + ChP->RxFIFOPtrs = ChOff + _RXF_OUTP; + ChP->RxFIFO = ChOff + _RX_FIFO; + + sOutB(ChP->Cmd, (Byte_t) ChanNum | RESRXFCNT); /* apply reset Rx FIFO count */ + sOutB(ChP->Cmd, (Byte_t) ChanNum); /* remove reset Rx FIFO count */ + sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs); /* clear Rx out ptr */ + sOutW(ChP->IndexData, 0); + sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs + 2); /* clear Rx in ptr */ + sOutW(ChP->IndexData, 0); + ChP->TxPrioCnt = ChOff + _TXP_CNT; + sOutW((WordIO_t) ChP->IndexAddr, ChP->TxPrioCnt); + sOutB(ChP->IndexData, 0); + ChP->TxPrioPtr = ChOff + _TXP_PNTR; + sOutW((WordIO_t) ChP->IndexAddr, ChP->TxPrioPtr); + sOutB(ChP->IndexData, 0); + ChP->TxPrioBuf = ChOff + _TXP_BUF; + sEnRxProcessor(ChP); /* start the Rx processor */ + + return 1; +} + +/*************************************************************************** +Function: sStopRxProcessor +Purpose: Stop the receive processor from processing a channel. +Call: sStopRxProcessor(ChP) + CHANNEL_T *ChP; Ptr to channel structure + +Comments: The receive processor can be started again with sStartRxProcessor(). + This function causes the receive processor to skip over the + stopped channel. It does not stop it from processing other channels. + +Warnings: No context switches are allowed while executing this function. + + Do not leave the receive processor stopped for more than one + character time. + + After calling this function a delay of 4 uS is required to ensure + that the receive processor is no longer processing this channel. +*/ +static void sStopRxProcessor(CHANNEL_T * ChP) +{ + Byte_t R[4]; + + R[0] = ChP->R[0]; + R[1] = ChP->R[1]; + R[2] = 0x0a; + R[3] = ChP->R[3]; + out32(ChP->IndexAddr, R); +} + +/*************************************************************************** +Function: sFlushRxFIFO +Purpose: Flush the Rx FIFO +Call: sFlushRxFIFO(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Return: void +Comments: To prevent data from being enqueued or dequeued in the Tx FIFO + while it is being flushed the receive processor is stopped + and the transmitter is disabled. After these operations a + 4 uS delay is done before clearing the pointers to allow + the receive processor to stop. These items are handled inside + this function. +Warnings: No context switches are allowed while executing this function. +*/ +static void sFlushRxFIFO(CHANNEL_T * ChP) +{ + int i; + Byte_t Ch; /* channel number within AIOP */ + int RxFIFOEnabled; /* 1 if Rx FIFO enabled */ + + if (sGetRxCnt(ChP) == 0) /* Rx FIFO empty */ + return; /* don't need to flush */ + + RxFIFOEnabled = 0; + if (ChP->R[0x32] == 0x08) { /* Rx FIFO is enabled */ + RxFIFOEnabled = 1; + sDisRxFIFO(ChP); /* disable it */ + for (i = 0; i < 2000 / 200; i++) /* delay 2 uS to allow proc to disable FIFO */ + sInB(ChP->IntChan); /* depends on bus i/o timing */ + } + sGetChanStatus(ChP); /* clear any pending Rx errors in chan stat */ + Ch = (Byte_t) sGetChanNum(ChP); + sOutB(ChP->Cmd, Ch | RESRXFCNT); /* apply reset Rx FIFO count */ + sOutB(ChP->Cmd, Ch); /* remove reset Rx FIFO count */ + sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs); /* clear Rx out ptr */ + sOutW(ChP->IndexData, 0); + sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs + 2); /* clear Rx in ptr */ + sOutW(ChP->IndexData, 0); + if (RxFIFOEnabled) + sEnRxFIFO(ChP); /* enable Rx FIFO */ +} + +/*************************************************************************** +Function: sFlushTxFIFO +Purpose: Flush the Tx FIFO +Call: sFlushTxFIFO(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Return: void +Comments: To prevent data from being enqueued or dequeued in the Tx FIFO + while it is being flushed the receive processor is stopped + and the transmitter is disabled. After these operations a + 4 uS delay is done before clearing the pointers to allow + the receive processor to stop. These items are handled inside + this function. +Warnings: No context switches are allowed while executing this function. +*/ +static void sFlushTxFIFO(CHANNEL_T * ChP) +{ + int i; + Byte_t Ch; /* channel number within AIOP */ + int TxEnabled; /* 1 if transmitter enabled */ + + if (sGetTxCnt(ChP) == 0) /* Tx FIFO empty */ + return; /* don't need to flush */ + + TxEnabled = 0; + if (ChP->TxControl[3] & TX_ENABLE) { + TxEnabled = 1; + sDisTransmit(ChP); /* disable transmitter */ + } + sStopRxProcessor(ChP); /* stop Rx processor */ + for (i = 0; i < 4000 / 200; i++) /* delay 4 uS to allow proc to stop */ + sInB(ChP->IntChan); /* depends on bus i/o timing */ + Ch = (Byte_t) sGetChanNum(ChP); + sOutB(ChP->Cmd, Ch | RESTXFCNT); /* apply reset Tx FIFO count */ + sOutB(ChP->Cmd, Ch); /* remove reset Tx FIFO count */ + sOutW((WordIO_t) ChP->IndexAddr, ChP->TxFIFOPtrs); /* clear Tx in/out ptrs */ + sOutW(ChP->IndexData, 0); + if (TxEnabled) + sEnTransmit(ChP); /* enable transmitter */ + sStartRxProcessor(ChP); /* restart Rx processor */ +} + +/*************************************************************************** +Function: sWriteTxPrioByte +Purpose: Write a byte of priority transmit data to a channel +Call: sWriteTxPrioByte(ChP,Data) + CHANNEL_T *ChP; Ptr to channel structure + Byte_t Data; The transmit data byte + +Return: int: 1 if the bytes is successfully written, otherwise 0. + +Comments: The priority byte is transmitted before any data in the Tx FIFO. + +Warnings: No context switches are allowed while executing this function. +*/ +static int sWriteTxPrioByte(CHANNEL_T * ChP, Byte_t Data) +{ + Byte_t DWBuf[4]; /* buffer for double word writes */ + Word_t *WordPtr; /* must be far because Win SS != DS */ + register DWordIO_t IndexAddr; + + if (sGetTxCnt(ChP) > 1) { /* write it to Tx priority buffer */ + IndexAddr = ChP->IndexAddr; + sOutW((WordIO_t) IndexAddr, ChP->TxPrioCnt); /* get priority buffer status */ + if (sInB((ByteIO_t) ChP->IndexData) & PRI_PEND) /* priority buffer busy */ + return (0); /* nothing sent */ + + WordPtr = (Word_t *) (&DWBuf[0]); + *WordPtr = ChP->TxPrioBuf; /* data byte address */ + + DWBuf[2] = Data; /* data byte value */ + out32(IndexAddr, DWBuf); /* write it out */ + + *WordPtr = ChP->TxPrioCnt; /* Tx priority count address */ + + DWBuf[2] = PRI_PEND + 1; /* indicate 1 byte pending */ + DWBuf[3] = 0; /* priority buffer pointer */ + out32(IndexAddr, DWBuf); /* write it out */ + } else { /* write it to Tx FIFO */ + + sWriteTxByte(sGetTxRxDataIO(ChP), Data); + } + return (1); /* 1 byte sent */ +} + +/*************************************************************************** +Function: sEnInterrupts +Purpose: Enable one or more interrupts for a channel +Call: sEnInterrupts(ChP,Flags) + CHANNEL_T *ChP; Ptr to channel structure + Word_t Flags: Interrupt enable flags, can be any combination + of the following flags: + TXINT_EN: Interrupt on Tx FIFO empty + RXINT_EN: Interrupt on Rx FIFO at trigger level (see + sSetRxTrigger()) + SRCINT_EN: Interrupt on SRC (Special Rx Condition) + MCINT_EN: Interrupt on modem input change + CHANINT_EN: Allow channel interrupt signal to the AIOP's + Interrupt Channel Register. +Return: void +Comments: If an interrupt enable flag is set in Flags, that interrupt will be + enabled. If an interrupt enable flag is not set in Flags, that + interrupt will not be changed. Interrupts can be disabled with + function sDisInterrupts(). + + This function sets the appropriate bit for the channel in the AIOP's + Interrupt Mask Register if the CHANINT_EN flag is set. This allows + this channel's bit to be set in the AIOP's Interrupt Channel Register. + + Interrupts must also be globally enabled before channel interrupts + will be passed on to the host. This is done with function + sEnGlobalInt(). + + In some cases it may be desirable to disable interrupts globally but + enable channel interrupts. This would allow the global interrupt + status register to be used to determine which AIOPs need service. +*/ +static void sEnInterrupts(CHANNEL_T * ChP, Word_t Flags) +{ + Byte_t Mask; /* Interrupt Mask Register */ + + ChP->RxControl[2] |= + ((Byte_t) Flags & (RXINT_EN | SRCINT_EN | MCINT_EN)); + + out32(ChP->IndexAddr, ChP->RxControl); + + ChP->TxControl[2] |= ((Byte_t) Flags & TXINT_EN); + + out32(ChP->IndexAddr, ChP->TxControl); + + if (Flags & CHANINT_EN) { + Mask = sInB(ChP->IntMask) | sBitMapSetTbl[ChP->ChanNum]; + sOutB(ChP->IntMask, Mask); + } +} + +/*************************************************************************** +Function: sDisInterrupts +Purpose: Disable one or more interrupts for a channel +Call: sDisInterrupts(ChP,Flags) + CHANNEL_T *ChP; Ptr to channel structure + Word_t Flags: Interrupt flags, can be any combination + of the following flags: + TXINT_EN: Interrupt on Tx FIFO empty + RXINT_EN: Interrupt on Rx FIFO at trigger level (see + sSetRxTrigger()) + SRCINT_EN: Interrupt on SRC (Special Rx Condition) + MCINT_EN: Interrupt on modem input change + CHANINT_EN: Disable channel interrupt signal to the + AIOP's Interrupt Channel Register. +Return: void +Comments: If an interrupt flag is set in Flags, that interrupt will be + disabled. If an interrupt flag is not set in Flags, that + interrupt will not be changed. Interrupts can be enabled with + function sEnInterrupts(). + + This function clears the appropriate bit for the channel in the AIOP's + Interrupt Mask Register if the CHANINT_EN flag is set. This blocks + this channel's bit from being set in the AIOP's Interrupt Channel + Register. +*/ +static void sDisInterrupts(CHANNEL_T * ChP, Word_t Flags) +{ + Byte_t Mask; /* Interrupt Mask Register */ + + ChP->RxControl[2] &= + ~((Byte_t) Flags & (RXINT_EN | SRCINT_EN | MCINT_EN)); + out32(ChP->IndexAddr, ChP->RxControl); + ChP->TxControl[2] &= ~((Byte_t) Flags & TXINT_EN); + out32(ChP->IndexAddr, ChP->TxControl); + + if (Flags & CHANINT_EN) { + Mask = sInB(ChP->IntMask) & sBitMapClrTbl[ChP->ChanNum]; + sOutB(ChP->IntMask, Mask); + } +} + +static void sSetInterfaceMode(CHANNEL_T * ChP, Byte_t mode) +{ + sOutB(ChP->CtlP->AiopIO[2], (mode & 0x18) | ChP->ChanNum); +} + +/* + * Not an official SSCI function, but how to reset RocketModems. + * ISA bus version + */ +static void sModemReset(CONTROLLER_T * CtlP, int chan, int on) +{ + ByteIO_t addr; + Byte_t val; + + addr = CtlP->AiopIO[0] + 0x400; + val = sInB(CtlP->MReg3IO); + /* if AIOP[1] is not enabled, enable it */ + if ((val & 2) == 0) { + val = sInB(CtlP->MReg2IO); + sOutB(CtlP->MReg2IO, (val & 0xfc) | (1 & 0x03)); + sOutB(CtlP->MBaseIO, (unsigned char) (addr >> 6)); + } + + sEnAiop(CtlP, 1); + if (!on) + addr += 8; + sOutB(addr + chan, 0); /* apply or remove reset */ + sDisAiop(CtlP, 1); +} + +/* + * Not an official SSCI function, but how to reset RocketModems. + * PCI bus version + */ +static void sPCIModemReset(CONTROLLER_T * CtlP, int chan, int on) +{ + ByteIO_t addr; + + addr = CtlP->AiopIO[0] + 0x40; /* 2nd AIOP */ + if (!on) + addr += 8; + sOutB(addr + chan, 0); /* apply or remove reset */ +} + +/* Returns the line number given the controller (board), aiop and channel number */ +static unsigned char GetLineNumber(int ctrl, int aiop, int ch) +{ + return lineNumbers[(ctrl << 5) | (aiop << 3) | ch]; +} + +/* + * Stores the line number associated with a given controller (board), aiop + * and channel number. + * Returns: The line number assigned + */ +static unsigned char SetLineNumber(int ctrl, int aiop, int ch) +{ + lineNumbers[(ctrl << 5) | (aiop << 3) | ch] = nextLineNumber++; + return (nextLineNumber - 1); +} diff --git a/drivers/tty/rocket.h b/drivers/tty/rocket.h new file mode 100644 index 000000000..d62ed6587 --- /dev/null +++ b/drivers/tty/rocket.h @@ -0,0 +1,111 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * rocket.h --- the exported interface of the rocket driver to its configuration program. + * + * Written by Theodore Ts'o, Copyright 1997. + * Copyright 1997 Comtrol Corporation. + * + */ + +/* Model Information Struct */ +typedef struct { + unsigned long model; + char modelString[80]; + unsigned long numPorts; + int loadrm2; + int startingPortNumber; +} rocketModel_t; + +struct rocket_config { + int line; + int flags; + int closing_wait; + int close_delay; + int port; + int reserved[32]; +}; + +struct rocket_ports { + int tty_major; + int callout_major; + rocketModel_t rocketModel[8]; +}; + +struct rocket_version { + char rocket_version[32]; + char rocket_date[32]; + char reserved[64]; +}; + +/* + * Rocketport flags + */ +/*#define ROCKET_CALLOUT_NOHUP 0x00000001 */ +#define ROCKET_FORCE_CD 0x00000002 +#define ROCKET_HUP_NOTIFY 0x00000004 +#define ROCKET_SPLIT_TERMIOS 0x00000008 +#define ROCKET_SPD_MASK 0x00000070 +#define ROCKET_SPD_HI 0x00000010 /* Use 57600 instead of 38400 bps */ +#define ROCKET_SPD_VHI 0x00000020 /* Use 115200 instead of 38400 bps */ +#define ROCKET_SPD_SHI 0x00000030 /* Use 230400 instead of 38400 bps */ +#define ROCKET_SPD_WARP 0x00000040 /* Use 460800 instead of 38400 bps */ +#define ROCKET_SAK 0x00000080 +#define ROCKET_SESSION_LOCKOUT 0x00000100 +#define ROCKET_PGRP_LOCKOUT 0x00000200 +#define ROCKET_RTS_TOGGLE 0x00000400 +#define ROCKET_MODE_MASK 0x00003000 +#define ROCKET_MODE_RS232 0x00000000 +#define ROCKET_MODE_RS485 0x00001000 +#define ROCKET_MODE_RS422 0x00002000 +#define ROCKET_FLAGS 0x00003FFF + +#define ROCKET_USR_MASK 0x0071 /* Legal flags that non-privileged + * users can set or reset */ + +/* + * For closing_wait and closing_wait2 + */ +#define ROCKET_CLOSING_WAIT_NONE ASYNC_CLOSING_WAIT_NONE +#define ROCKET_CLOSING_WAIT_INF ASYNC_CLOSING_WAIT_INF + +/* + * Rocketport ioctls -- "RP" + */ +#define RCKP_GET_CONFIG 0x00525002 +#define RCKP_SET_CONFIG 0x00525003 +#define RCKP_GET_PORTS 0x00525004 +#define RCKP_RESET_RM2 0x00525005 +#define RCKP_GET_VERSION 0x00525006 + +/* Rocketport Models */ +#define MODEL_RP32INTF 0x0001 /* RP 32 port w/external I/F */ +#define MODEL_RP8INTF 0x0002 /* RP 8 port w/external I/F */ +#define MODEL_RP16INTF 0x0003 /* RP 16 port w/external I/F */ +#define MODEL_RP8OCTA 0x0005 /* RP 8 port w/octa cable */ +#define MODEL_RP4QUAD 0x0004 /* RP 4 port w/quad cable */ +#define MODEL_RP8J 0x0006 /* RP 8 port w/RJ11 connectors */ +#define MODEL_RP4J 0x0007 /* RP 4 port w/RJ45 connectors */ +#define MODEL_RP8SNI 0x0008 /* RP 8 port w/ DB78 SNI connector */ +#define MODEL_RP16SNI 0x0009 /* RP 16 port w/ DB78 SNI connector */ +#define MODEL_RPP4 0x000A /* RP Plus 4 port */ +#define MODEL_RPP8 0x000B /* RP Plus 8 port */ +#define MODEL_RP2_232 0x000E /* RP Plus 2 port RS232 */ +#define MODEL_RP2_422 0x000F /* RP Plus 2 port RS232 */ + +/* Rocketmodem II Models */ +#define MODEL_RP6M 0x000C /* RM 6 port */ +#define MODEL_RP4M 0x000D /* RM 4 port */ + +/* Universal PCI boards */ +#define MODEL_UPCI_RP32INTF 0x0801 /* RP UPCI 32 port w/external I/F */ +#define MODEL_UPCI_RP8INTF 0x0802 /* RP UPCI 8 port w/external I/F */ +#define MODEL_UPCI_RP16INTF 0x0803 /* RP UPCI 16 port w/external I/F */ +#define MODEL_UPCI_RP8OCTA 0x0805 /* RP UPCI 8 port w/octa cable */ +#define MODEL_UPCI_RM3_8PORT 0x080C /* RP UPCI Rocketmodem III 8 port */ +#define MODEL_UPCI_RM3_4PORT 0x080C /* RP UPCI Rocketmodem III 4 port */ + +/* Compact PCI 16 port */ +#define MODEL_CPCI_RP16INTF 0x0903 /* RP Compact PCI 16 port w/external I/F */ + +/* All ISA boards */ +#define MODEL_ISA 0x1000 diff --git a/drivers/tty/rocket_int.h b/drivers/tty/rocket_int.h new file mode 100644 index 000000000..727e50dbb --- /dev/null +++ b/drivers/tty/rocket_int.h @@ -0,0 +1,1214 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * rocket_int.h --- internal header file for rocket.c + * + * Written by Theodore Ts'o, Copyright 1997. + * Copyright 1997 Comtrol Corporation. + * + */ + +/* + * Definition of the types in rcktpt_type + */ +#define ROCKET_TYPE_NORMAL 0 +#define ROCKET_TYPE_MODEM 1 +#define ROCKET_TYPE_MODEMII 2 +#define ROCKET_TYPE_MODEMIII 3 +#define ROCKET_TYPE_PC104 4 + +#include + +#include +#include + +typedef unsigned char Byte_t; +typedef unsigned int ByteIO_t; + +typedef unsigned int Word_t; +typedef unsigned int WordIO_t; + +typedef unsigned int DWordIO_t; + +/* + * Note! Normally the Linux I/O macros already take care of + * byte-swapping the I/O instructions. However, all accesses using + * sOutDW aren't really 32-bit accesses, but should be handled in byte + * order. Hence the use of the cpu_to_le32() macro to byte-swap + * things to no-op the byte swapping done by the big-endian outl() + * instruction. + */ + +static inline void sOutB(unsigned short port, unsigned char value) +{ +#ifdef ROCKET_DEBUG_IO + printk(KERN_DEBUG "sOutB(%x, %x)...\n", port, value); +#endif + outb_p(value, port); +} + +static inline void sOutW(unsigned short port, unsigned short value) +{ +#ifdef ROCKET_DEBUG_IO + printk(KERN_DEBUG "sOutW(%x, %x)...\n", port, value); +#endif + outw_p(value, port); +} + +static inline void out32(unsigned short port, Byte_t *p) +{ + u32 value = get_unaligned_le32(p); +#ifdef ROCKET_DEBUG_IO + printk(KERN_DEBUG "out32(%x, %lx)...\n", port, value); +#endif + outl_p(value, port); +} + +static inline unsigned char sInB(unsigned short port) +{ + return inb_p(port); +} + +static inline unsigned short sInW(unsigned short port) +{ + return inw_p(port); +} + +/* This is used to move arrays of bytes so byte swapping isn't appropriate. */ +#define sOutStrW(port, addr, count) if (count) outsw(port, addr, count) +#define sInStrW(port, addr, count) if (count) insw(port, addr, count) + +#define CTL_SIZE 8 +#define AIOP_CTL_SIZE 4 +#define CHAN_AIOP_SIZE 8 +#define MAX_PORTS_PER_AIOP 8 +#define MAX_AIOPS_PER_BOARD 4 +#define MAX_PORTS_PER_BOARD 32 + +/* Bus type ID */ +#define isISA 0 +#define isPCI 1 +#define isMC 2 + +/* Controller ID numbers */ +#define CTLID_NULL -1 /* no controller exists */ +#define CTLID_0001 0x0001 /* controller release 1 */ + +/* AIOP ID numbers, identifies AIOP type implementing channel */ +#define AIOPID_NULL -1 /* no AIOP or channel exists */ +#define AIOPID_0001 0x0001 /* AIOP release 1 */ + +/************************************************************************ + Global Register Offsets - Direct Access - Fixed values +************************************************************************/ + +#define _CMD_REG 0x38 /* Command Register 8 Write */ +#define _INT_CHAN 0x39 /* Interrupt Channel Register 8 Read */ +#define _INT_MASK 0x3A /* Interrupt Mask Register 8 Read / Write */ +#define _UNUSED 0x3B /* Unused 8 */ +#define _INDX_ADDR 0x3C /* Index Register Address 16 Write */ +#define _INDX_DATA 0x3E /* Index Register Data 8/16 Read / Write */ + +/************************************************************************ + Channel Register Offsets for 1st channel in AIOP - Direct Access +************************************************************************/ +#define _TD0 0x00 /* Transmit Data 16 Write */ +#define _RD0 0x00 /* Receive Data 16 Read */ +#define _CHN_STAT0 0x20 /* Channel Status 8/16 Read / Write */ +#define _FIFO_CNT0 0x10 /* Transmit/Receive FIFO Count 16 Read */ +#define _INT_ID0 0x30 /* Interrupt Identification 8 Read */ + +/************************************************************************ + Tx Control Register Offsets - Indexed - External - Fixed +************************************************************************/ +#define _TX_ENBLS 0x980 /* Tx Processor Enables Register 8 Read / Write */ +#define _TXCMP1 0x988 /* Transmit Compare Value #1 8 Read / Write */ +#define _TXCMP2 0x989 /* Transmit Compare Value #2 8 Read / Write */ +#define _TXREP1B1 0x98A /* Tx Replace Value #1 - Byte 1 8 Read / Write */ +#define _TXREP1B2 0x98B /* Tx Replace Value #1 - Byte 2 8 Read / Write */ +#define _TXREP2 0x98C /* Transmit Replace Value #2 8 Read / Write */ + +/************************************************************************ +Memory Controller Register Offsets - Indexed - External - Fixed +************************************************************************/ +#define _RX_FIFO 0x000 /* Rx FIFO */ +#define _TX_FIFO 0x800 /* Tx FIFO */ +#define _RXF_OUTP 0x990 /* Rx FIFO OUT pointer 16 Read / Write */ +#define _RXF_INP 0x992 /* Rx FIFO IN pointer 16 Read / Write */ +#define _TXF_OUTP 0x994 /* Tx FIFO OUT pointer 8 Read / Write */ +#define _TXF_INP 0x995 /* Tx FIFO IN pointer 8 Read / Write */ +#define _TXP_CNT 0x996 /* Tx Priority Count 8 Read / Write */ +#define _TXP_PNTR 0x997 /* Tx Priority Pointer 8 Read / Write */ + +#define PRI_PEND 0x80 /* Priority data pending (bit7, Tx pri cnt) */ +#define TXFIFO_SIZE 255 /* size of Tx FIFO */ +#define RXFIFO_SIZE 1023 /* size of Rx FIFO */ + +/************************************************************************ +Tx Priority Buffer - Indexed - External - Fixed +************************************************************************/ +#define _TXP_BUF 0x9C0 /* Tx Priority Buffer 32 Bytes Read / Write */ +#define TXP_SIZE 0x20 /* 32 bytes */ + +/************************************************************************ +Channel Register Offsets - Indexed - Internal - Fixed +************************************************************************/ + +#define _TX_CTRL 0xFF0 /* Transmit Control 16 Write */ +#define _RX_CTRL 0xFF2 /* Receive Control 8 Write */ +#define _BAUD 0xFF4 /* Baud Rate 16 Write */ +#define _CLK_PRE 0xFF6 /* Clock Prescaler 8 Write */ + +#define STMBREAK 0x08 /* BREAK */ +#define STMFRAME 0x04 /* framing error */ +#define STMRCVROVR 0x02 /* receiver over run error */ +#define STMPARITY 0x01 /* parity error */ +#define STMERROR (STMBREAK | STMFRAME | STMPARITY) +#define STMBREAKH 0x800 /* BREAK */ +#define STMFRAMEH 0x400 /* framing error */ +#define STMRCVROVRH 0x200 /* receiver over run error */ +#define STMPARITYH 0x100 /* parity error */ +#define STMERRORH (STMBREAKH | STMFRAMEH | STMPARITYH) + +#define CTS_ACT 0x20 /* CTS input asserted */ +#define DSR_ACT 0x10 /* DSR input asserted */ +#define CD_ACT 0x08 /* CD input asserted */ +#define TXFIFOMT 0x04 /* Tx FIFO is empty */ +#define TXSHRMT 0x02 /* Tx shift register is empty */ +#define RDA 0x01 /* Rx data available */ +#define DRAINED (TXFIFOMT | TXSHRMT) /* indicates Tx is drained */ + +#define STATMODE 0x8000 /* status mode enable bit */ +#define RXFOVERFL 0x2000 /* receive FIFO overflow */ +#define RX2MATCH 0x1000 /* receive compare byte 2 match */ +#define RX1MATCH 0x0800 /* receive compare byte 1 match */ +#define RXBREAK 0x0400 /* received BREAK */ +#define RXFRAME 0x0200 /* received framing error */ +#define RXPARITY 0x0100 /* received parity error */ +#define STATERROR (RXBREAK | RXFRAME | RXPARITY) + +#define CTSFC_EN 0x80 /* CTS flow control enable bit */ +#define RTSTOG_EN 0x40 /* RTS toggle enable bit */ +#define TXINT_EN 0x10 /* transmit interrupt enable */ +#define STOP2 0x08 /* enable 2 stop bits (0 = 1 stop) */ +#define PARITY_EN 0x04 /* enable parity (0 = no parity) */ +#define EVEN_PAR 0x02 /* even parity (0 = odd parity) */ +#define DATA8BIT 0x01 /* 8 bit data (0 = 7 bit data) */ + +#define SETBREAK 0x10 /* send break condition (must clear) */ +#define LOCALLOOP 0x08 /* local loopback set for test */ +#define SET_DTR 0x04 /* assert DTR */ +#define SET_RTS 0x02 /* assert RTS */ +#define TX_ENABLE 0x01 /* enable transmitter */ + +#define RTSFC_EN 0x40 /* RTS flow control enable */ +#define RXPROC_EN 0x20 /* receive processor enable */ +#define TRIG_NO 0x00 /* Rx FIFO trigger level 0 (no trigger) */ +#define TRIG_1 0x08 /* trigger level 1 char */ +#define TRIG_1_2 0x10 /* trigger level 1/2 */ +#define TRIG_7_8 0x18 /* trigger level 7/8 */ +#define TRIG_MASK 0x18 /* trigger level mask */ +#define SRCINT_EN 0x04 /* special Rx condition interrupt enable */ +#define RXINT_EN 0x02 /* Rx interrupt enable */ +#define MCINT_EN 0x01 /* modem change interrupt enable */ + +#define RXF_TRIG 0x20 /* Rx FIFO trigger level interrupt */ +#define TXFIFO_MT 0x10 /* Tx FIFO empty interrupt */ +#define SRC_INT 0x08 /* special receive condition interrupt */ +#define DELTA_CD 0x04 /* CD change interrupt */ +#define DELTA_CTS 0x02 /* CTS change interrupt */ +#define DELTA_DSR 0x01 /* DSR change interrupt */ + +#define REP1W2_EN 0x10 /* replace byte 1 with 2 bytes enable */ +#define IGN2_EN 0x08 /* ignore byte 2 enable */ +#define IGN1_EN 0x04 /* ignore byte 1 enable */ +#define COMP2_EN 0x02 /* compare byte 2 enable */ +#define COMP1_EN 0x01 /* compare byte 1 enable */ + +#define RESET_ALL 0x80 /* reset AIOP (all channels) */ +#define TXOVERIDE 0x40 /* Transmit software off override */ +#define RESETUART 0x20 /* reset channel's UART */ +#define RESTXFCNT 0x10 /* reset channel's Tx FIFO count register */ +#define RESRXFCNT 0x08 /* reset channel's Rx FIFO count register */ + +#define INTSTAT0 0x01 /* AIOP 0 interrupt status */ +#define INTSTAT1 0x02 /* AIOP 1 interrupt status */ +#define INTSTAT2 0x04 /* AIOP 2 interrupt status */ +#define INTSTAT3 0x08 /* AIOP 3 interrupt status */ + +#define INTR_EN 0x08 /* allow interrupts to host */ +#define INT_STROB 0x04 /* strobe and clear interrupt line (EOI) */ + +/************************************************************************** + MUDBAC remapped for PCI +**************************************************************************/ + +#define _CFG_INT_PCI 0x40 +#define _PCI_INT_FUNC 0x3A + +#define PCI_STROB 0x2000 /* bit 13 of int aiop register */ +#define INTR_EN_PCI 0x0010 /* allow interrupts to host */ + +/* + * Definitions for Universal PCI board registers + */ +#define _PCI_9030_INT_CTRL 0x4c /* Offsets from BAR1 */ +#define _PCI_9030_GPIO_CTRL 0x54 +#define PCI_INT_CTRL_AIOP 0x0001 +#define PCI_GPIO_CTRL_8PORT 0x4000 +#define _PCI_9030_RING_IND 0xc0 /* Offsets from BAR1 */ + +#define CHAN3_EN 0x08 /* enable AIOP 3 */ +#define CHAN2_EN 0x04 /* enable AIOP 2 */ +#define CHAN1_EN 0x02 /* enable AIOP 1 */ +#define CHAN0_EN 0x01 /* enable AIOP 0 */ +#define FREQ_DIS 0x00 +#define FREQ_274HZ 0x60 +#define FREQ_137HZ 0x50 +#define FREQ_69HZ 0x40 +#define FREQ_34HZ 0x30 +#define FREQ_17HZ 0x20 +#define FREQ_9HZ 0x10 +#define PERIODIC_ONLY 0x80 /* only PERIODIC interrupt */ + +#define CHANINT_EN 0x0100 /* flags to enable/disable channel ints */ + +#define RDATASIZE 72 +#define RREGDATASIZE 52 + +/* + * AIOP interrupt bits for ISA/PCI boards and UPCI boards. + */ +#define AIOP_INTR_BIT_0 0x0001 +#define AIOP_INTR_BIT_1 0x0002 +#define AIOP_INTR_BIT_2 0x0004 +#define AIOP_INTR_BIT_3 0x0008 + +#define AIOP_INTR_BITS ( \ + AIOP_INTR_BIT_0 \ + | AIOP_INTR_BIT_1 \ + | AIOP_INTR_BIT_2 \ + | AIOP_INTR_BIT_3) + +#define UPCI_AIOP_INTR_BIT_0 0x0004 +#define UPCI_AIOP_INTR_BIT_1 0x0020 +#define UPCI_AIOP_INTR_BIT_2 0x0100 +#define UPCI_AIOP_INTR_BIT_3 0x0800 + +#define UPCI_AIOP_INTR_BITS ( \ + UPCI_AIOP_INTR_BIT_0 \ + | UPCI_AIOP_INTR_BIT_1 \ + | UPCI_AIOP_INTR_BIT_2 \ + | UPCI_AIOP_INTR_BIT_3) + +/* Controller level information structure */ +typedef struct { + int CtlID; + int CtlNum; + int BusType; + int boardType; + int isUPCI; + WordIO_t PCIIO; + WordIO_t PCIIO2; + ByteIO_t MBaseIO; + ByteIO_t MReg1IO; + ByteIO_t MReg2IO; + ByteIO_t MReg3IO; + Byte_t MReg2; + Byte_t MReg3; + int NumAiop; + int AltChanRingIndicator; + ByteIO_t UPCIRingInd; + WordIO_t AiopIO[AIOP_CTL_SIZE]; + ByteIO_t AiopIntChanIO[AIOP_CTL_SIZE]; + int AiopID[AIOP_CTL_SIZE]; + int AiopNumChan[AIOP_CTL_SIZE]; + Word_t *AiopIntrBits; +} CONTROLLER_T; + +typedef CONTROLLER_T CONTROLLER_t; + +/* Channel level information structure */ +typedef struct { + CONTROLLER_T *CtlP; + int AiopNum; + int ChanID; + int ChanNum; + int rtsToggle; + + ByteIO_t Cmd; + ByteIO_t IntChan; + ByteIO_t IntMask; + DWordIO_t IndexAddr; + WordIO_t IndexData; + + WordIO_t TxRxData; + WordIO_t ChanStat; + WordIO_t TxRxCount; + ByteIO_t IntID; + + Word_t TxFIFO; + Word_t TxFIFOPtrs; + Word_t RxFIFO; + Word_t RxFIFOPtrs; + Word_t TxPrioCnt; + Word_t TxPrioPtr; + Word_t TxPrioBuf; + + Byte_t R[RREGDATASIZE]; + + Byte_t BaudDiv[4]; + Byte_t TxControl[4]; + Byte_t RxControl[4]; + Byte_t TxEnables[4]; + Byte_t TxCompare[4]; + Byte_t TxReplace1[4]; + Byte_t TxReplace2[4]; +} CHANNEL_T; + +typedef CHANNEL_T CHANNEL_t; +typedef CHANNEL_T *CHANPTR_T; + +#define InterfaceModeRS232 0x00 +#define InterfaceModeRS422 0x08 +#define InterfaceModeRS485 0x10 +#define InterfaceModeRS232T 0x18 + +/*************************************************************************** +Function: sClrBreak +Purpose: Stop sending a transmit BREAK signal +Call: sClrBreak(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sClrBreak(ChP) \ +do { \ + (ChP)->TxControl[3] &= ~SETBREAK; \ + out32((ChP)->IndexAddr,(ChP)->TxControl); \ +} while (0) + +/*************************************************************************** +Function: sClrDTR +Purpose: Clr the DTR output +Call: sClrDTR(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sClrDTR(ChP) \ +do { \ + (ChP)->TxControl[3] &= ~SET_DTR; \ + out32((ChP)->IndexAddr,(ChP)->TxControl); \ +} while (0) + +/*************************************************************************** +Function: sClrRTS +Purpose: Clr the RTS output +Call: sClrRTS(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sClrRTS(ChP) \ +do { \ + if ((ChP)->rtsToggle) break; \ + (ChP)->TxControl[3] &= ~SET_RTS; \ + out32((ChP)->IndexAddr,(ChP)->TxControl); \ +} while (0) + +/*************************************************************************** +Function: sClrTxXOFF +Purpose: Clear any existing transmit software flow control off condition +Call: sClrTxXOFF(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sClrTxXOFF(ChP) \ +do { \ + sOutB((ChP)->Cmd,TXOVERIDE | (Byte_t)(ChP)->ChanNum); \ + sOutB((ChP)->Cmd,(Byte_t)(ChP)->ChanNum); \ +} while (0) + +/*************************************************************************** +Function: sCtlNumToCtlPtr +Purpose: Convert a controller number to controller structure pointer +Call: sCtlNumToCtlPtr(CtlNum) + int CtlNum; Controller number +Return: CONTROLLER_T *: Ptr to controller structure +*/ +#define sCtlNumToCtlPtr(CTLNUM) &sController[CTLNUM] + +/*************************************************************************** +Function: sControllerEOI +Purpose: Strobe the MUDBAC's End Of Interrupt bit. +Call: sControllerEOI(CtlP) + CONTROLLER_T *CtlP; Ptr to controller structure +*/ +#define sControllerEOI(CTLP) sOutB((CTLP)->MReg2IO,(CTLP)->MReg2 | INT_STROB) + +/*************************************************************************** +Function: sPCIControllerEOI +Purpose: Strobe the PCI End Of Interrupt bit. + For the UPCI boards, toggle the AIOP interrupt enable bit + (this was taken from the Windows driver). +Call: sPCIControllerEOI(CtlP) + CONTROLLER_T *CtlP; Ptr to controller structure +*/ +#define sPCIControllerEOI(CTLP) \ +do { \ + if ((CTLP)->isUPCI) { \ + Word_t w = sInW((CTLP)->PCIIO); \ + sOutW((CTLP)->PCIIO, (w ^ PCI_INT_CTRL_AIOP)); \ + sOutW((CTLP)->PCIIO, w); \ + } \ + else { \ + sOutW((CTLP)->PCIIO, PCI_STROB); \ + } \ +} while (0) + +/*************************************************************************** +Function: sDisAiop +Purpose: Disable I/O access to an AIOP +Call: sDisAiop(CltP) + CONTROLLER_T *CtlP; Ptr to controller structure + int AiopNum; Number of AIOP on controller +*/ +#define sDisAiop(CTLP,AIOPNUM) \ +do { \ + (CTLP)->MReg3 &= sBitMapClrTbl[AIOPNUM]; \ + sOutB((CTLP)->MReg3IO,(CTLP)->MReg3); \ +} while (0) + +/*************************************************************************** +Function: sDisCTSFlowCtl +Purpose: Disable output flow control using CTS +Call: sDisCTSFlowCtl(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sDisCTSFlowCtl(ChP) \ +do { \ + (ChP)->TxControl[2] &= ~CTSFC_EN; \ + out32((ChP)->IndexAddr,(ChP)->TxControl); \ +} while (0) + +/*************************************************************************** +Function: sDisIXANY +Purpose: Disable IXANY Software Flow Control +Call: sDisIXANY(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sDisIXANY(ChP) \ +do { \ + (ChP)->R[0x0e] = 0x86; \ + out32((ChP)->IndexAddr,&(ChP)->R[0x0c]); \ +} while (0) + +/*************************************************************************** +Function: DisParity +Purpose: Disable parity +Call: sDisParity(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Comments: Function sSetParity() can be used in place of functions sEnParity(), + sDisParity(), sSetOddParity(), and sSetEvenParity(). +*/ +#define sDisParity(ChP) \ +do { \ + (ChP)->TxControl[2] &= ~PARITY_EN; \ + out32((ChP)->IndexAddr,(ChP)->TxControl); \ +} while (0) + +/*************************************************************************** +Function: sDisRTSToggle +Purpose: Disable RTS toggle +Call: sDisRTSToggle(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sDisRTSToggle(ChP) \ +do { \ + (ChP)->TxControl[2] &= ~RTSTOG_EN; \ + out32((ChP)->IndexAddr,(ChP)->TxControl); \ + (ChP)->rtsToggle = 0; \ +} while (0) + +/*************************************************************************** +Function: sDisRxFIFO +Purpose: Disable Rx FIFO +Call: sDisRxFIFO(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sDisRxFIFO(ChP) \ +do { \ + (ChP)->R[0x32] = 0x0a; \ + out32((ChP)->IndexAddr,&(ChP)->R[0x30]); \ +} while (0) + +/*************************************************************************** +Function: sDisRxStatusMode +Purpose: Disable the Rx status mode +Call: sDisRxStatusMode(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Comments: This takes the channel out of the receive status mode. All + subsequent reads of receive data using sReadRxWord() will return + two data bytes. +*/ +#define sDisRxStatusMode(ChP) sOutW((ChP)->ChanStat,0) + +/*************************************************************************** +Function: sDisTransmit +Purpose: Disable transmit +Call: sDisTransmit(ChP) + CHANNEL_T *ChP; Ptr to channel structure + This disables movement of Tx data from the Tx FIFO into the 1 byte + Tx buffer. Therefore there could be up to a 2 byte latency + between the time sDisTransmit() is called and the transmit buffer + and transmit shift register going completely empty. +*/ +#define sDisTransmit(ChP) \ +do { \ + (ChP)->TxControl[3] &= ~TX_ENABLE; \ + out32((ChP)->IndexAddr,(ChP)->TxControl); \ +} while (0) + +/*************************************************************************** +Function: sDisTxSoftFlowCtl +Purpose: Disable Tx Software Flow Control +Call: sDisTxSoftFlowCtl(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sDisTxSoftFlowCtl(ChP) \ +do { \ + (ChP)->R[0x06] = 0x8a; \ + out32((ChP)->IndexAddr,&(ChP)->R[0x04]); \ +} while (0) + +/*************************************************************************** +Function: sEnAiop +Purpose: Enable I/O access to an AIOP +Call: sEnAiop(CltP) + CONTROLLER_T *CtlP; Ptr to controller structure + int AiopNum; Number of AIOP on controller +*/ +#define sEnAiop(CTLP,AIOPNUM) \ +do { \ + (CTLP)->MReg3 |= sBitMapSetTbl[AIOPNUM]; \ + sOutB((CTLP)->MReg3IO,(CTLP)->MReg3); \ +} while (0) + +/*************************************************************************** +Function: sEnCTSFlowCtl +Purpose: Enable output flow control using CTS +Call: sEnCTSFlowCtl(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sEnCTSFlowCtl(ChP) \ +do { \ + (ChP)->TxControl[2] |= CTSFC_EN; \ + out32((ChP)->IndexAddr,(ChP)->TxControl); \ +} while (0) + +/*************************************************************************** +Function: sEnIXANY +Purpose: Enable IXANY Software Flow Control +Call: sEnIXANY(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sEnIXANY(ChP) \ +do { \ + (ChP)->R[0x0e] = 0x21; \ + out32((ChP)->IndexAddr,&(ChP)->R[0x0c]); \ +} while (0) + +/*************************************************************************** +Function: EnParity +Purpose: Enable parity +Call: sEnParity(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Comments: Function sSetParity() can be used in place of functions sEnParity(), + sDisParity(), sSetOddParity(), and sSetEvenParity(). + +Warnings: Before enabling parity odd or even parity should be chosen using + functions sSetOddParity() or sSetEvenParity(). +*/ +#define sEnParity(ChP) \ +do { \ + (ChP)->TxControl[2] |= PARITY_EN; \ + out32((ChP)->IndexAddr,(ChP)->TxControl); \ +} while (0) + +/*************************************************************************** +Function: sEnRTSToggle +Purpose: Enable RTS toggle +Call: sEnRTSToggle(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Comments: This function will disable RTS flow control and clear the RTS + line to allow operation of RTS toggle. +*/ +#define sEnRTSToggle(ChP) \ +do { \ + (ChP)->RxControl[2] &= ~RTSFC_EN; \ + out32((ChP)->IndexAddr,(ChP)->RxControl); \ + (ChP)->TxControl[2] |= RTSTOG_EN; \ + (ChP)->TxControl[3] &= ~SET_RTS; \ + out32((ChP)->IndexAddr,(ChP)->TxControl); \ + (ChP)->rtsToggle = 1; \ +} while (0) + +/*************************************************************************** +Function: sEnRxFIFO +Purpose: Enable Rx FIFO +Call: sEnRxFIFO(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sEnRxFIFO(ChP) \ +do { \ + (ChP)->R[0x32] = 0x08; \ + out32((ChP)->IndexAddr,&(ChP)->R[0x30]); \ +} while (0) + +/*************************************************************************** +Function: sEnRxProcessor +Purpose: Enable the receive processor +Call: sEnRxProcessor(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Comments: This function is used to start the receive processor. When + the channel is in the reset state the receive processor is not + running. This is done to prevent the receive processor from + executing invalid microcode instructions prior to the + downloading of the microcode. + +Warnings: This function must be called after valid microcode has been + downloaded to the AIOP, and it must not be called before the + microcode has been downloaded. +*/ +#define sEnRxProcessor(ChP) \ +do { \ + (ChP)->RxControl[2] |= RXPROC_EN; \ + out32((ChP)->IndexAddr,(ChP)->RxControl); \ +} while (0) + +/*************************************************************************** +Function: sEnRxStatusMode +Purpose: Enable the Rx status mode +Call: sEnRxStatusMode(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Comments: This places the channel in the receive status mode. All subsequent + reads of receive data using sReadRxWord() will return a data byte + in the low word and a status byte in the high word. + +*/ +#define sEnRxStatusMode(ChP) sOutW((ChP)->ChanStat,STATMODE) + +/*************************************************************************** +Function: sEnTransmit +Purpose: Enable transmit +Call: sEnTransmit(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sEnTransmit(ChP) \ +do { \ + (ChP)->TxControl[3] |= TX_ENABLE; \ + out32((ChP)->IndexAddr,(ChP)->TxControl); \ +} while (0) + +/*************************************************************************** +Function: sEnTxSoftFlowCtl +Purpose: Enable Tx Software Flow Control +Call: sEnTxSoftFlowCtl(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sEnTxSoftFlowCtl(ChP) \ +do { \ + (ChP)->R[0x06] = 0xc5; \ + out32((ChP)->IndexAddr,&(ChP)->R[0x04]); \ +} while (0) + +/*************************************************************************** +Function: sGetAiopIntStatus +Purpose: Get the AIOP interrupt status +Call: sGetAiopIntStatus(CtlP,AiopNum) + CONTROLLER_T *CtlP; Ptr to controller structure + int AiopNum; AIOP number +Return: Byte_t: The AIOP interrupt status. Bits 0 through 7 + represent channels 0 through 7 respectively. If a + bit is set that channel is interrupting. +*/ +#define sGetAiopIntStatus(CTLP,AIOPNUM) sInB((CTLP)->AiopIntChanIO[AIOPNUM]) + +/*************************************************************************** +Function: sGetAiopNumChan +Purpose: Get the number of channels supported by an AIOP +Call: sGetAiopNumChan(CtlP,AiopNum) + CONTROLLER_T *CtlP; Ptr to controller structure + int AiopNum; AIOP number +Return: int: The number of channels supported by the AIOP +*/ +#define sGetAiopNumChan(CTLP,AIOPNUM) (CTLP)->AiopNumChan[AIOPNUM] + +/*************************************************************************** +Function: sGetChanIntID +Purpose: Get a channel's interrupt identification byte +Call: sGetChanIntID(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Return: Byte_t: The channel interrupt ID. Can be any + combination of the following flags: + RXF_TRIG: Rx FIFO trigger level interrupt + TXFIFO_MT: Tx FIFO empty interrupt + SRC_INT: Special receive condition interrupt + DELTA_CD: CD change interrupt + DELTA_CTS: CTS change interrupt + DELTA_DSR: DSR change interrupt +*/ +#define sGetChanIntID(ChP) (sInB((ChP)->IntID) & (RXF_TRIG | TXFIFO_MT | SRC_INT | DELTA_CD | DELTA_CTS | DELTA_DSR)) + +/*************************************************************************** +Function: sGetChanNum +Purpose: Get the number of a channel within an AIOP +Call: sGetChanNum(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Return: int: Channel number within AIOP, or NULLCHAN if channel does + not exist. +*/ +#define sGetChanNum(ChP) (ChP)->ChanNum + +/*************************************************************************** +Function: sGetChanStatus +Purpose: Get the channel status +Call: sGetChanStatus(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Return: Word_t: The channel status. Can be any combination of + the following flags: + LOW BYTE FLAGS + CTS_ACT: CTS input asserted + DSR_ACT: DSR input asserted + CD_ACT: CD input asserted + TXFIFOMT: Tx FIFO is empty + TXSHRMT: Tx shift register is empty + RDA: Rx data available + + HIGH BYTE FLAGS + STATMODE: status mode enable bit + RXFOVERFL: receive FIFO overflow + RX2MATCH: receive compare byte 2 match + RX1MATCH: receive compare byte 1 match + RXBREAK: received BREAK + RXFRAME: received framing error + RXPARITY: received parity error +Warnings: This function will clear the high byte flags in the Channel + Status Register. +*/ +#define sGetChanStatus(ChP) sInW((ChP)->ChanStat) + +/*************************************************************************** +Function: sGetChanStatusLo +Purpose: Get the low byte only of the channel status +Call: sGetChanStatusLo(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Return: Byte_t: The channel status low byte. Can be any combination + of the following flags: + CTS_ACT: CTS input asserted + DSR_ACT: DSR input asserted + CD_ACT: CD input asserted + TXFIFOMT: Tx FIFO is empty + TXSHRMT: Tx shift register is empty + RDA: Rx data available +*/ +#define sGetChanStatusLo(ChP) sInB((ByteIO_t)(ChP)->ChanStat) + +/********************************************************************** + * Get RI status of channel + * Defined as a function in rocket.c -aes + */ +#if 0 +#define sGetChanRI(ChP) ((ChP)->CtlP->AltChanRingIndicator ? \ + (sInB((ByteIO_t)((ChP)->ChanStat+8)) & DSR_ACT) : \ + (((ChP)->CtlP->boardType == ROCKET_TYPE_PC104) ? \ + (!(sInB((ChP)->CtlP->AiopIO[3]) & sBitMapSetTbl[(ChP)->ChanNum])) : \ + 0)) +#endif + +/*************************************************************************** +Function: sGetControllerIntStatus +Purpose: Get the controller interrupt status +Call: sGetControllerIntStatus(CtlP) + CONTROLLER_T *CtlP; Ptr to controller structure +Return: Byte_t: The controller interrupt status in the lower 4 + bits. Bits 0 through 3 represent AIOP's 0 + through 3 respectively. If a bit is set that + AIOP is interrupting. Bits 4 through 7 will + always be cleared. +*/ +#define sGetControllerIntStatus(CTLP) (sInB((CTLP)->MReg1IO) & 0x0f) + +/*************************************************************************** +Function: sPCIGetControllerIntStatus +Purpose: Get the controller interrupt status +Call: sPCIGetControllerIntStatus(CtlP) + CONTROLLER_T *CtlP; Ptr to controller structure +Return: unsigned char: The controller interrupt status in the lower 4 + bits and bit 4. Bits 0 through 3 represent AIOP's 0 + through 3 respectively. Bit 4 is set if the int + was generated from periodic. If a bit is set the + AIOP is interrupting. +*/ +#define sPCIGetControllerIntStatus(CTLP) \ + ((CTLP)->isUPCI ? \ + (sInW((CTLP)->PCIIO2) & UPCI_AIOP_INTR_BITS) : \ + ((sInW((CTLP)->PCIIO) >> 8) & AIOP_INTR_BITS)) + +/*************************************************************************** + +Function: sGetRxCnt +Purpose: Get the number of data bytes in the Rx FIFO +Call: sGetRxCnt(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Return: int: The number of data bytes in the Rx FIFO. +Comments: Byte read of count register is required to obtain Rx count. + +*/ +#define sGetRxCnt(ChP) sInW((ChP)->TxRxCount) + +/*************************************************************************** +Function: sGetTxCnt +Purpose: Get the number of data bytes in the Tx FIFO +Call: sGetTxCnt(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Return: Byte_t: The number of data bytes in the Tx FIFO. +Comments: Byte read of count register is required to obtain Tx count. + +*/ +#define sGetTxCnt(ChP) sInB((ByteIO_t)(ChP)->TxRxCount) + +/***************************************************************************** +Function: sGetTxRxDataIO +Purpose: Get the I/O address of a channel's TxRx Data register +Call: sGetTxRxDataIO(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Return: WordIO_t: I/O address of a channel's TxRx Data register +*/ +#define sGetTxRxDataIO(ChP) (ChP)->TxRxData + +/*************************************************************************** +Function: sInitChanDefaults +Purpose: Initialize a channel structure to it's default state. +Call: sInitChanDefaults(ChP) + CHANNEL_T *ChP; Ptr to the channel structure +Comments: This function must be called once for every channel structure + that exists before any other SSCI calls can be made. + +*/ +#define sInitChanDefaults(ChP) \ +do { \ + (ChP)->CtlP = NULLCTLPTR; \ + (ChP)->AiopNum = NULLAIOP; \ + (ChP)->ChanID = AIOPID_NULL; \ + (ChP)->ChanNum = NULLCHAN; \ +} while (0) + +/*************************************************************************** +Function: sResetAiopByNum +Purpose: Reset the AIOP by number +Call: sResetAiopByNum(CTLP,AIOPNUM) + CONTROLLER_T CTLP; Ptr to controller structure + AIOPNUM; AIOP index +*/ +#define sResetAiopByNum(CTLP,AIOPNUM) \ +do { \ + sOutB((CTLP)->AiopIO[(AIOPNUM)]+_CMD_REG,RESET_ALL); \ + sOutB((CTLP)->AiopIO[(AIOPNUM)]+_CMD_REG,0x0); \ +} while (0) + +/*************************************************************************** +Function: sSendBreak +Purpose: Send a transmit BREAK signal +Call: sSendBreak(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sSendBreak(ChP) \ +do { \ + (ChP)->TxControl[3] |= SETBREAK; \ + out32((ChP)->IndexAddr,(ChP)->TxControl); \ +} while (0) + +/*************************************************************************** +Function: sSetBaud +Purpose: Set baud rate +Call: sSetBaud(ChP,Divisor) + CHANNEL_T *ChP; Ptr to channel structure + Word_t Divisor; 16 bit baud rate divisor for channel +*/ +#define sSetBaud(ChP,DIVISOR) \ +do { \ + (ChP)->BaudDiv[2] = (Byte_t)(DIVISOR); \ + (ChP)->BaudDiv[3] = (Byte_t)((DIVISOR) >> 8); \ + out32((ChP)->IndexAddr,(ChP)->BaudDiv); \ +} while (0) + +/*************************************************************************** +Function: sSetData7 +Purpose: Set data bits to 7 +Call: sSetData7(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sSetData7(ChP) \ +do { \ + (ChP)->TxControl[2] &= ~DATA8BIT; \ + out32((ChP)->IndexAddr,(ChP)->TxControl); \ +} while (0) + +/*************************************************************************** +Function: sSetData8 +Purpose: Set data bits to 8 +Call: sSetData8(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sSetData8(ChP) \ +do { \ + (ChP)->TxControl[2] |= DATA8BIT; \ + out32((ChP)->IndexAddr,(ChP)->TxControl); \ +} while (0) + +/*************************************************************************** +Function: sSetDTR +Purpose: Set the DTR output +Call: sSetDTR(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sSetDTR(ChP) \ +do { \ + (ChP)->TxControl[3] |= SET_DTR; \ + out32((ChP)->IndexAddr,(ChP)->TxControl); \ +} while (0) + +/*************************************************************************** +Function: sSetEvenParity +Purpose: Set even parity +Call: sSetEvenParity(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Comments: Function sSetParity() can be used in place of functions sEnParity(), + sDisParity(), sSetOddParity(), and sSetEvenParity(). + +Warnings: This function has no effect unless parity is enabled with function + sEnParity(). +*/ +#define sSetEvenParity(ChP) \ +do { \ + (ChP)->TxControl[2] |= EVEN_PAR; \ + out32((ChP)->IndexAddr,(ChP)->TxControl); \ +} while (0) + +/*************************************************************************** +Function: sSetOddParity +Purpose: Set odd parity +Call: sSetOddParity(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Comments: Function sSetParity() can be used in place of functions sEnParity(), + sDisParity(), sSetOddParity(), and sSetEvenParity(). + +Warnings: This function has no effect unless parity is enabled with function + sEnParity(). +*/ +#define sSetOddParity(ChP) \ +do { \ + (ChP)->TxControl[2] &= ~EVEN_PAR; \ + out32((ChP)->IndexAddr,(ChP)->TxControl); \ +} while (0) + +/*************************************************************************** +Function: sSetRTS +Purpose: Set the RTS output +Call: sSetRTS(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sSetRTS(ChP) \ +do { \ + if ((ChP)->rtsToggle) break; \ + (ChP)->TxControl[3] |= SET_RTS; \ + out32((ChP)->IndexAddr,(ChP)->TxControl); \ +} while (0) + +/*************************************************************************** +Function: sSetRxTrigger +Purpose: Set the Rx FIFO trigger level +Call: sSetRxProcessor(ChP,Level) + CHANNEL_T *ChP; Ptr to channel structure + Byte_t Level; Number of characters in Rx FIFO at which the + interrupt will be generated. Can be any of the following flags: + + TRIG_NO: no trigger + TRIG_1: 1 character in FIFO + TRIG_1_2: FIFO 1/2 full + TRIG_7_8: FIFO 7/8 full +Comments: An interrupt will be generated when the trigger level is reached + only if function sEnInterrupt() has been called with flag + RXINT_EN set. The RXF_TRIG flag in the Interrupt Idenfification + register will be set whenever the trigger level is reached + regardless of the setting of RXINT_EN. + +*/ +#define sSetRxTrigger(ChP,LEVEL) \ +do { \ + (ChP)->RxControl[2] &= ~TRIG_MASK; \ + (ChP)->RxControl[2] |= LEVEL; \ + out32((ChP)->IndexAddr,(ChP)->RxControl); \ +} while (0) + +/*************************************************************************** +Function: sSetStop1 +Purpose: Set stop bits to 1 +Call: sSetStop1(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sSetStop1(ChP) \ +do { \ + (ChP)->TxControl[2] &= ~STOP2; \ + out32((ChP)->IndexAddr,(ChP)->TxControl); \ +} while (0) + +/*************************************************************************** +Function: sSetStop2 +Purpose: Set stop bits to 2 +Call: sSetStop2(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sSetStop2(ChP) \ +do { \ + (ChP)->TxControl[2] |= STOP2; \ + out32((ChP)->IndexAddr,(ChP)->TxControl); \ +} while (0) + +/*************************************************************************** +Function: sSetTxXOFFChar +Purpose: Set the Tx XOFF flow control character +Call: sSetTxXOFFChar(ChP,Ch) + CHANNEL_T *ChP; Ptr to channel structure + Byte_t Ch; The value to set the Tx XOFF character to +*/ +#define sSetTxXOFFChar(ChP,CH) \ +do { \ + (ChP)->R[0x07] = (CH); \ + out32((ChP)->IndexAddr,&(ChP)->R[0x04]); \ +} while (0) + +/*************************************************************************** +Function: sSetTxXONChar +Purpose: Set the Tx XON flow control character +Call: sSetTxXONChar(ChP,Ch) + CHANNEL_T *ChP; Ptr to channel structure + Byte_t Ch; The value to set the Tx XON character to +*/ +#define sSetTxXONChar(ChP,CH) \ +do { \ + (ChP)->R[0x0b] = (CH); \ + out32((ChP)->IndexAddr,&(ChP)->R[0x08]); \ +} while (0) + +/*************************************************************************** +Function: sStartRxProcessor +Purpose: Start a channel's receive processor +Call: sStartRxProcessor(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Comments: This function is used to start a Rx processor after it was + stopped with sStopRxProcessor() or sStopSWInFlowCtl(). It + will restart both the Rx processor and software input flow control. + +*/ +#define sStartRxProcessor(ChP) out32((ChP)->IndexAddr,&(ChP)->R[0]) + +/*************************************************************************** +Function: sWriteTxByte +Purpose: Write a transmit data byte to a channel. + ByteIO_t io: Channel transmit register I/O address. This can + be obtained with sGetTxRxDataIO(). + Byte_t Data; The transmit data byte. +Warnings: This function writes the data byte without checking to see if + sMaxTxSize is exceeded in the Tx FIFO. +*/ +#define sWriteTxByte(IO,DATA) sOutB(IO,DATA) + +/* + * Begin Linux specific definitions for the Rocketport driver + * + * This code is Copyright Theodore Ts'o, 1995-1997 + */ + +struct r_port { + int magic; + struct tty_port port; + int line; + int flags; /* Don't yet match the ASY_ flags!! */ + unsigned int board:3; + unsigned int aiop:2; + unsigned int chan:3; + CONTROLLER_t *ctlp; + CHANNEL_t channel; + int intmask; + int xmit_fifo_room; /* room in xmit fifo */ + unsigned char *xmit_buf; + int xmit_head; + int xmit_tail; + int xmit_cnt; + int cd_status; + int ignore_status_mask; + int read_status_mask; + int cps; + + spinlock_t slock; + struct mutex write_mtx; +}; + +#define RPORT_MAGIC 0x525001 + +#define NUM_BOARDS 8 +#define MAX_RP_PORTS (32*NUM_BOARDS) + +/* + * The size of the xmit buffer is 1 page, or 4096 bytes + */ +#define XMIT_BUF_SIZE 4096 + +/* number of characters left in xmit buffer before we ask for more */ +#define WAKEUP_CHARS 256 + +/* + * Assigned major numbers for the Comtrol Rocketport + */ +#define TTY_ROCKET_MAJOR 46 +#define CUA_ROCKET_MAJOR 47 + +#ifdef PCI_VENDOR_ID_RP +#undef PCI_VENDOR_ID_RP +#undef PCI_DEVICE_ID_RP8OCTA +#undef PCI_DEVICE_ID_RP8INTF +#undef PCI_DEVICE_ID_RP16INTF +#undef PCI_DEVICE_ID_RP32INTF +#undef PCI_DEVICE_ID_URP8OCTA +#undef PCI_DEVICE_ID_URP8INTF +#undef PCI_DEVICE_ID_URP16INTF +#undef PCI_DEVICE_ID_CRP16INTF +#undef PCI_DEVICE_ID_URP32INTF +#endif + +/* Comtrol PCI Vendor ID */ +#define PCI_VENDOR_ID_RP 0x11fe + +/* Comtrol Device ID's */ +#define PCI_DEVICE_ID_RP32INTF 0x0001 /* Rocketport 32 port w/external I/F */ +#define PCI_DEVICE_ID_RP8INTF 0x0002 /* Rocketport 8 port w/external I/F */ +#define PCI_DEVICE_ID_RP16INTF 0x0003 /* Rocketport 16 port w/external I/F */ +#define PCI_DEVICE_ID_RP4QUAD 0x0004 /* Rocketport 4 port w/quad cable */ +#define PCI_DEVICE_ID_RP8OCTA 0x0005 /* Rocketport 8 port w/octa cable */ +#define PCI_DEVICE_ID_RP8J 0x0006 /* Rocketport 8 port w/RJ11 connectors */ +#define PCI_DEVICE_ID_RP4J 0x0007 /* Rocketport 4 port w/RJ11 connectors */ +#define PCI_DEVICE_ID_RP8SNI 0x0008 /* Rocketport 8 port w/ DB78 SNI (Siemens) connector */ +#define PCI_DEVICE_ID_RP16SNI 0x0009 /* Rocketport 16 port w/ DB78 SNI (Siemens) connector */ +#define PCI_DEVICE_ID_RPP4 0x000A /* Rocketport Plus 4 port */ +#define PCI_DEVICE_ID_RPP8 0x000B /* Rocketport Plus 8 port */ +#define PCI_DEVICE_ID_RP6M 0x000C /* RocketModem 6 port */ +#define PCI_DEVICE_ID_RP4M 0x000D /* RocketModem 4 port */ +#define PCI_DEVICE_ID_RP2_232 0x000E /* Rocketport Plus 2 port RS232 */ +#define PCI_DEVICE_ID_RP2_422 0x000F /* Rocketport Plus 2 port RS422 */ + +/* Universal PCI boards */ +#define PCI_DEVICE_ID_URP32INTF 0x0801 /* Rocketport UPCI 32 port w/external I/F */ +#define PCI_DEVICE_ID_URP8INTF 0x0802 /* Rocketport UPCI 8 port w/external I/F */ +#define PCI_DEVICE_ID_URP16INTF 0x0803 /* Rocketport UPCI 16 port w/external I/F */ +#define PCI_DEVICE_ID_URP8OCTA 0x0805 /* Rocketport UPCI 8 port w/octa cable */ +#define PCI_DEVICE_ID_UPCI_RM3_8PORT 0x080C /* Rocketmodem III 8 port */ +#define PCI_DEVICE_ID_UPCI_RM3_4PORT 0x080D /* Rocketmodem III 4 port */ + +/* Compact PCI device */ +#define PCI_DEVICE_ID_CRP16INTF 0x0903 /* Rocketport Compact PCI 16 port w/external I/F */ + diff --git a/drivers/tty/serdev/Kconfig b/drivers/tty/serdev/Kconfig new file mode 100644 index 000000000..46ae732bf --- /dev/null +++ b/drivers/tty/serdev/Kconfig @@ -0,0 +1,25 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Serial bus device driver configuration +# +menuconfig SERIAL_DEV_BUS + tristate "Serial device bus" + help + Core support for devices connected via a serial port. + + Note that you typically also want to enable TTY port controller support. + +if SERIAL_DEV_BUS + +config SERIAL_DEV_CTRL_TTYPORT + bool "Serial device TTY port controller" + help + Say Y here if you want to use the Serial device bus with common TTY + drivers (e.g. serial drivers). + + If unsure, say Y. + depends on TTY + depends on SERIAL_DEV_BUS != m + default y + +endif diff --git a/drivers/tty/serdev/Makefile b/drivers/tty/serdev/Makefile new file mode 100644 index 000000000..078417e5b --- /dev/null +++ b/drivers/tty/serdev/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0 +serdev-objs := core.o + +obj-$(CONFIG_SERIAL_DEV_BUS) += serdev.o + +obj-$(CONFIG_SERIAL_DEV_CTRL_TTYPORT) += serdev-ttyport.o diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c new file mode 100644 index 000000000..c5f0d936b --- /dev/null +++ b/drivers/tty/serdev/core.c @@ -0,0 +1,845 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2016-2017 Linaro Ltd., Rob Herring + * + * Based on drivers/spmi/spmi.c: + * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static bool is_registered; +static DEFINE_IDA(ctrl_ida); + +static ssize_t modalias_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int len; + + len = acpi_device_modalias(dev, buf, PAGE_SIZE - 1); + if (len != -ENODEV) + return len; + + return of_device_modalias(dev, buf, PAGE_SIZE); +} +static DEVICE_ATTR_RO(modalias); + +static struct attribute *serdev_device_attrs[] = { + &dev_attr_modalias.attr, + NULL, +}; +ATTRIBUTE_GROUPS(serdev_device); + +static int serdev_device_uevent(struct device *dev, struct kobj_uevent_env *env) +{ + int rc; + + /* TODO: platform modalias */ + + rc = acpi_device_uevent_modalias(dev, env); + if (rc != -ENODEV) + return rc; + + return of_device_uevent_modalias(dev, env); +} + +static void serdev_device_release(struct device *dev) +{ + struct serdev_device *serdev = to_serdev_device(dev); + kfree(serdev); +} + +static const struct device_type serdev_device_type = { + .groups = serdev_device_groups, + .uevent = serdev_device_uevent, + .release = serdev_device_release, +}; + +static bool is_serdev_device(const struct device *dev) +{ + return dev->type == &serdev_device_type; +} + +static void serdev_ctrl_release(struct device *dev) +{ + struct serdev_controller *ctrl = to_serdev_controller(dev); + ida_simple_remove(&ctrl_ida, ctrl->nr); + kfree(ctrl); +} + +static const struct device_type serdev_ctrl_type = { + .release = serdev_ctrl_release, +}; + +static int serdev_device_match(struct device *dev, struct device_driver *drv) +{ + if (!is_serdev_device(dev)) + return 0; + + /* TODO: platform matching */ + if (acpi_driver_match_device(dev, drv)) + return 1; + + return of_driver_match_device(dev, drv); +} + +/** + * serdev_device_add() - add a device previously constructed via serdev_device_alloc() + * @serdev: serdev_device to be added + */ +int serdev_device_add(struct serdev_device *serdev) +{ + struct serdev_controller *ctrl = serdev->ctrl; + struct device *parent = serdev->dev.parent; + int err; + + dev_set_name(&serdev->dev, "%s-%d", dev_name(parent), serdev->nr); + + /* Only a single slave device is currently supported. */ + if (ctrl->serdev) { + dev_err(&serdev->dev, "controller busy\n"); + return -EBUSY; + } + ctrl->serdev = serdev; + + err = device_add(&serdev->dev); + if (err < 0) { + dev_err(&serdev->dev, "Can't add %s, status %pe\n", + dev_name(&serdev->dev), ERR_PTR(err)); + goto err_clear_serdev; + } + + dev_dbg(&serdev->dev, "device %s registered\n", dev_name(&serdev->dev)); + + return 0; + +err_clear_serdev: + ctrl->serdev = NULL; + return err; +} +EXPORT_SYMBOL_GPL(serdev_device_add); + +/** + * serdev_device_remove(): remove an serdev device + * @serdev: serdev_device to be removed + */ +void serdev_device_remove(struct serdev_device *serdev) +{ + struct serdev_controller *ctrl = serdev->ctrl; + + device_unregister(&serdev->dev); + ctrl->serdev = NULL; +} +EXPORT_SYMBOL_GPL(serdev_device_remove); + +int serdev_device_open(struct serdev_device *serdev) +{ + struct serdev_controller *ctrl = serdev->ctrl; + int ret; + + if (!ctrl || !ctrl->ops->open) + return -EINVAL; + + ret = ctrl->ops->open(ctrl); + if (ret) + return ret; + + ret = pm_runtime_get_sync(&ctrl->dev); + if (ret < 0) { + pm_runtime_put_noidle(&ctrl->dev); + goto err_close; + } + + return 0; + +err_close: + if (ctrl->ops->close) + ctrl->ops->close(ctrl); + + return ret; +} +EXPORT_SYMBOL_GPL(serdev_device_open); + +void serdev_device_close(struct serdev_device *serdev) +{ + struct serdev_controller *ctrl = serdev->ctrl; + + if (!ctrl || !ctrl->ops->close) + return; + + pm_runtime_put(&ctrl->dev); + + ctrl->ops->close(ctrl); +} +EXPORT_SYMBOL_GPL(serdev_device_close); + +static void devm_serdev_device_release(struct device *dev, void *dr) +{ + serdev_device_close(*(struct serdev_device **)dr); +} + +int devm_serdev_device_open(struct device *dev, struct serdev_device *serdev) +{ + struct serdev_device **dr; + int ret; + + dr = devres_alloc(devm_serdev_device_release, sizeof(*dr), GFP_KERNEL); + if (!dr) + return -ENOMEM; + + ret = serdev_device_open(serdev); + if (ret) { + devres_free(dr); + return ret; + } + + *dr = serdev; + devres_add(dev, dr); + + return 0; +} +EXPORT_SYMBOL_GPL(devm_serdev_device_open); + +void serdev_device_write_wakeup(struct serdev_device *serdev) +{ + complete(&serdev->write_comp); +} +EXPORT_SYMBOL_GPL(serdev_device_write_wakeup); + +/** + * serdev_device_write_buf() - write data asynchronously + * @serdev: serdev device + * @buf: data to be written + * @count: number of bytes to write + * + * Write data to the device asynchronously. + * + * Note that any accepted data has only been buffered by the controller; use + * serdev_device_wait_until_sent() to make sure the controller write buffer + * has actually been emptied. + * + * Return: The number of bytes written (less than count if not enough room in + * the write buffer), or a negative errno on errors. + */ +int serdev_device_write_buf(struct serdev_device *serdev, + const unsigned char *buf, size_t count) +{ + struct serdev_controller *ctrl = serdev->ctrl; + + if (!ctrl || !ctrl->ops->write_buf) + return -EINVAL; + + return ctrl->ops->write_buf(ctrl, buf, count); +} +EXPORT_SYMBOL_GPL(serdev_device_write_buf); + +/** + * serdev_device_write() - write data synchronously + * @serdev: serdev device + * @buf: data to be written + * @count: number of bytes to write + * @timeout: timeout in jiffies, or 0 to wait indefinitely + * + * Write data to the device synchronously by repeatedly calling + * serdev_device_write() until the controller has accepted all data (unless + * interrupted by a timeout or a signal). + * + * Note that any accepted data has only been buffered by the controller; use + * serdev_device_wait_until_sent() to make sure the controller write buffer + * has actually been emptied. + * + * Note that this function depends on serdev_device_write_wakeup() being + * called in the serdev driver write_wakeup() callback. + * + * Return: The number of bytes written (less than count if interrupted), + * -ETIMEDOUT or -ERESTARTSYS if interrupted before any bytes were written, or + * a negative errno on errors. + */ +int serdev_device_write(struct serdev_device *serdev, + const unsigned char *buf, size_t count, + long timeout) +{ + struct serdev_controller *ctrl = serdev->ctrl; + int written = 0; + int ret; + + if (!ctrl || !ctrl->ops->write_buf || !serdev->ops->write_wakeup) + return -EINVAL; + + if (timeout == 0) + timeout = MAX_SCHEDULE_TIMEOUT; + + mutex_lock(&serdev->write_lock); + do { + reinit_completion(&serdev->write_comp); + + ret = ctrl->ops->write_buf(ctrl, buf, count); + if (ret < 0) + break; + + written += ret; + buf += ret; + count -= ret; + + if (count == 0) + break; + + timeout = wait_for_completion_interruptible_timeout(&serdev->write_comp, + timeout); + } while (timeout > 0); + mutex_unlock(&serdev->write_lock); + + if (ret < 0) + return ret; + + if (timeout <= 0 && written == 0) { + if (timeout == -ERESTARTSYS) + return -ERESTARTSYS; + else + return -ETIMEDOUT; + } + + return written; +} +EXPORT_SYMBOL_GPL(serdev_device_write); + +void serdev_device_write_flush(struct serdev_device *serdev) +{ + struct serdev_controller *ctrl = serdev->ctrl; + + if (!ctrl || !ctrl->ops->write_flush) + return; + + ctrl->ops->write_flush(ctrl); +} +EXPORT_SYMBOL_GPL(serdev_device_write_flush); + +int serdev_device_write_room(struct serdev_device *serdev) +{ + struct serdev_controller *ctrl = serdev->ctrl; + + if (!ctrl || !ctrl->ops->write_room) + return 0; + + return serdev->ctrl->ops->write_room(ctrl); +} +EXPORT_SYMBOL_GPL(serdev_device_write_room); + +unsigned int serdev_device_set_baudrate(struct serdev_device *serdev, unsigned int speed) +{ + struct serdev_controller *ctrl = serdev->ctrl; + + if (!ctrl || !ctrl->ops->set_baudrate) + return 0; + + return ctrl->ops->set_baudrate(ctrl, speed); + +} +EXPORT_SYMBOL_GPL(serdev_device_set_baudrate); + +void serdev_device_set_flow_control(struct serdev_device *serdev, bool enable) +{ + struct serdev_controller *ctrl = serdev->ctrl; + + if (!ctrl || !ctrl->ops->set_flow_control) + return; + + ctrl->ops->set_flow_control(ctrl, enable); +} +EXPORT_SYMBOL_GPL(serdev_device_set_flow_control); + +int serdev_device_set_parity(struct serdev_device *serdev, + enum serdev_parity parity) +{ + struct serdev_controller *ctrl = serdev->ctrl; + + if (!ctrl || !ctrl->ops->set_parity) + return -ENOTSUPP; + + return ctrl->ops->set_parity(ctrl, parity); +} +EXPORT_SYMBOL_GPL(serdev_device_set_parity); + +void serdev_device_wait_until_sent(struct serdev_device *serdev, long timeout) +{ + struct serdev_controller *ctrl = serdev->ctrl; + + if (!ctrl || !ctrl->ops->wait_until_sent) + return; + + ctrl->ops->wait_until_sent(ctrl, timeout); +} +EXPORT_SYMBOL_GPL(serdev_device_wait_until_sent); + +int serdev_device_get_tiocm(struct serdev_device *serdev) +{ + struct serdev_controller *ctrl = serdev->ctrl; + + if (!ctrl || !ctrl->ops->get_tiocm) + return -ENOTSUPP; + + return ctrl->ops->get_tiocm(ctrl); +} +EXPORT_SYMBOL_GPL(serdev_device_get_tiocm); + +int serdev_device_set_tiocm(struct serdev_device *serdev, int set, int clear) +{ + struct serdev_controller *ctrl = serdev->ctrl; + + if (!ctrl || !ctrl->ops->set_tiocm) + return -ENOTSUPP; + + return ctrl->ops->set_tiocm(ctrl, set, clear); +} +EXPORT_SYMBOL_GPL(serdev_device_set_tiocm); + +static int serdev_drv_probe(struct device *dev) +{ + const struct serdev_device_driver *sdrv = to_serdev_device_driver(dev->driver); + int ret; + + ret = dev_pm_domain_attach(dev, true); + if (ret) + return ret; + + ret = sdrv->probe(to_serdev_device(dev)); + if (ret) + dev_pm_domain_detach(dev, true); + + return ret; +} + +static int serdev_drv_remove(struct device *dev) +{ + const struct serdev_device_driver *sdrv = to_serdev_device_driver(dev->driver); + if (sdrv->remove) + sdrv->remove(to_serdev_device(dev)); + + dev_pm_domain_detach(dev, true); + + return 0; +} + +static struct bus_type serdev_bus_type = { + .name = "serial", + .match = serdev_device_match, + .probe = serdev_drv_probe, + .remove = serdev_drv_remove, +}; + +/** + * serdev_device_alloc() - Allocate a new serdev device + * @ctrl: associated controller + * + * Caller is responsible for either calling serdev_device_add() to add the + * newly allocated controller, or calling serdev_device_put() to discard it. + */ +struct serdev_device *serdev_device_alloc(struct serdev_controller *ctrl) +{ + struct serdev_device *serdev; + + serdev = kzalloc(sizeof(*serdev), GFP_KERNEL); + if (!serdev) + return NULL; + + serdev->ctrl = ctrl; + device_initialize(&serdev->dev); + serdev->dev.parent = &ctrl->dev; + serdev->dev.bus = &serdev_bus_type; + serdev->dev.type = &serdev_device_type; + init_completion(&serdev->write_comp); + mutex_init(&serdev->write_lock); + return serdev; +} +EXPORT_SYMBOL_GPL(serdev_device_alloc); + +/** + * serdev_controller_alloc() - Allocate a new serdev controller + * @parent: parent device + * @size: size of private data + * + * Caller is responsible for either calling serdev_controller_add() to add the + * newly allocated controller, or calling serdev_controller_put() to discard it. + * The allocated private data region may be accessed via + * serdev_controller_get_drvdata() + */ +struct serdev_controller *serdev_controller_alloc(struct device *parent, + size_t size) +{ + struct serdev_controller *ctrl; + int id; + + if (WARN_ON(!parent)) + return NULL; + + ctrl = kzalloc(sizeof(*ctrl) + size, GFP_KERNEL); + if (!ctrl) + return NULL; + + id = ida_simple_get(&ctrl_ida, 0, 0, GFP_KERNEL); + if (id < 0) { + dev_err(parent, + "unable to allocate serdev controller identifier.\n"); + goto err_free; + } + + ctrl->nr = id; + + device_initialize(&ctrl->dev); + ctrl->dev.type = &serdev_ctrl_type; + ctrl->dev.bus = &serdev_bus_type; + ctrl->dev.parent = parent; + ctrl->dev.of_node = parent->of_node; + serdev_controller_set_drvdata(ctrl, &ctrl[1]); + + dev_set_name(&ctrl->dev, "serial%d", id); + + pm_runtime_no_callbacks(&ctrl->dev); + pm_suspend_ignore_children(&ctrl->dev, true); + + dev_dbg(&ctrl->dev, "allocated controller 0x%p id %d\n", ctrl, id); + return ctrl; + +err_free: + kfree(ctrl); + + return NULL; +} +EXPORT_SYMBOL_GPL(serdev_controller_alloc); + +static int of_serdev_register_devices(struct serdev_controller *ctrl) +{ + struct device_node *node; + struct serdev_device *serdev = NULL; + int err; + bool found = false; + + for_each_available_child_of_node(ctrl->dev.of_node, node) { + if (!of_get_property(node, "compatible", NULL)) + continue; + + dev_dbg(&ctrl->dev, "adding child %pOF\n", node); + + serdev = serdev_device_alloc(ctrl); + if (!serdev) + continue; + + serdev->dev.of_node = node; + + err = serdev_device_add(serdev); + if (err) { + dev_err(&serdev->dev, + "failure adding device. status %pe\n", + ERR_PTR(err)); + serdev_device_put(serdev); + } else + found = true; + } + if (!found) + return -ENODEV; + + return 0; +} + +#ifdef CONFIG_ACPI + +#define SERDEV_ACPI_MAX_SCAN_DEPTH 32 + +struct acpi_serdev_lookup { + acpi_handle device_handle; + acpi_handle controller_handle; + int n; + int index; +}; + +static int acpi_serdev_parse_resource(struct acpi_resource *ares, void *data) +{ + struct acpi_serdev_lookup *lookup = data; + struct acpi_resource_uart_serialbus *sb; + acpi_status status; + + if (ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS) + return 1; + + if (ares->data.common_serial_bus.type != ACPI_RESOURCE_SERIAL_TYPE_UART) + return 1; + + if (lookup->index != -1 && lookup->n++ != lookup->index) + return 1; + + sb = &ares->data.uart_serial_bus; + + status = acpi_get_handle(lookup->device_handle, + sb->resource_source.string_ptr, + &lookup->controller_handle); + if (ACPI_FAILURE(status)) + return 1; + + /* + * NOTE: Ideally, we would also want to retreive other properties here, + * once setting them before opening the device is supported by serdev. + */ + + return 1; +} + +static int acpi_serdev_do_lookup(struct acpi_device *adev, + struct acpi_serdev_lookup *lookup) +{ + struct list_head resource_list; + int ret; + + lookup->device_handle = acpi_device_handle(adev); + lookup->controller_handle = NULL; + lookup->n = 0; + + INIT_LIST_HEAD(&resource_list); + ret = acpi_dev_get_resources(adev, &resource_list, + acpi_serdev_parse_resource, lookup); + acpi_dev_free_resource_list(&resource_list); + + if (ret < 0) + return -EINVAL; + + return 0; +} + +static int acpi_serdev_check_resources(struct serdev_controller *ctrl, + struct acpi_device *adev) +{ + struct acpi_serdev_lookup lookup; + int ret; + + if (acpi_bus_get_status(adev) || !adev->status.present) + return -EINVAL; + + /* Look for UARTSerialBusV2 resource */ + lookup.index = -1; // we only care for the last device + + ret = acpi_serdev_do_lookup(adev, &lookup); + if (ret) + return ret; + + /* + * Apple machines provide an empty resource template, so on those + * machines just look for immediate children with a "baud" property + * (from the _DSM method) instead. + */ + if (!lookup.controller_handle && x86_apple_machine && + !acpi_dev_get_property(adev, "baud", ACPI_TYPE_BUFFER, NULL)) + acpi_get_parent(adev->handle, &lookup.controller_handle); + + /* Make sure controller and ResourceSource handle match */ + if (ACPI_HANDLE(ctrl->dev.parent) != lookup.controller_handle) + return -ENODEV; + + return 0; +} + +static acpi_status acpi_serdev_register_device(struct serdev_controller *ctrl, + struct acpi_device *adev) +{ + struct serdev_device *serdev; + int err; + + serdev = serdev_device_alloc(ctrl); + if (!serdev) { + dev_err(&ctrl->dev, "failed to allocate serdev device for %s\n", + dev_name(&adev->dev)); + return AE_NO_MEMORY; + } + + ACPI_COMPANION_SET(&serdev->dev, adev); + acpi_device_set_enumerated(adev); + + err = serdev_device_add(serdev); + if (err) { + dev_err(&serdev->dev, + "failure adding ACPI serdev device. status %pe\n", + ERR_PTR(err)); + serdev_device_put(serdev); + } + + return AE_OK; +} + +static const struct acpi_device_id serdev_acpi_devices_blacklist[] = { + { "INT3511", 0 }, + { "INT3512", 0 }, + { }, +}; + +static acpi_status acpi_serdev_add_device(acpi_handle handle, u32 level, + void *data, void **return_value) +{ + struct serdev_controller *ctrl = data; + struct acpi_device *adev; + + if (acpi_bus_get_device(handle, &adev)) + return AE_OK; + + if (acpi_device_enumerated(adev)) + return AE_OK; + + /* Skip if black listed */ + if (!acpi_match_device_ids(adev, serdev_acpi_devices_blacklist)) + return AE_OK; + + if (acpi_serdev_check_resources(ctrl, adev)) + return AE_OK; + + return acpi_serdev_register_device(ctrl, adev); +} + + +static int acpi_serdev_register_devices(struct serdev_controller *ctrl) +{ + acpi_status status; + + if (!has_acpi_companion(ctrl->dev.parent)) + return -ENODEV; + + status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, + SERDEV_ACPI_MAX_SCAN_DEPTH, + acpi_serdev_add_device, NULL, ctrl, NULL); + if (ACPI_FAILURE(status)) + dev_warn(&ctrl->dev, "failed to enumerate serdev slaves\n"); + + if (!ctrl->serdev) + return -ENODEV; + + return 0; +} +#else +static inline int acpi_serdev_register_devices(struct serdev_controller *ctrl) +{ + return -ENODEV; +} +#endif /* CONFIG_ACPI */ + +/** + * serdev_controller_add() - Add an serdev controller + * @ctrl: controller to be registered. + * + * Register a controller previously allocated via serdev_controller_alloc() with + * the serdev core. + */ +int serdev_controller_add(struct serdev_controller *ctrl) +{ + int ret_of, ret_acpi, ret; + + /* Can't register until after driver model init */ + if (WARN_ON(!is_registered)) + return -EAGAIN; + + ret = device_add(&ctrl->dev); + if (ret) + return ret; + + pm_runtime_enable(&ctrl->dev); + + ret_of = of_serdev_register_devices(ctrl); + ret_acpi = acpi_serdev_register_devices(ctrl); + if (ret_of && ret_acpi) { + dev_dbg(&ctrl->dev, "no devices registered: of:%pe acpi:%pe\n", + ERR_PTR(ret_of), ERR_PTR(ret_acpi)); + ret = -ENODEV; + goto err_rpm_disable; + } + + dev_dbg(&ctrl->dev, "serdev%d registered: dev:%p\n", + ctrl->nr, &ctrl->dev); + return 0; + +err_rpm_disable: + pm_runtime_disable(&ctrl->dev); + device_del(&ctrl->dev); + return ret; +}; +EXPORT_SYMBOL_GPL(serdev_controller_add); + +/* Remove a device associated with a controller */ +static int serdev_remove_device(struct device *dev, void *data) +{ + struct serdev_device *serdev = to_serdev_device(dev); + if (dev->type == &serdev_device_type) + serdev_device_remove(serdev); + return 0; +} + +/** + * serdev_controller_remove(): remove an serdev controller + * @ctrl: controller to remove + * + * Remove a serdev controller. Caller is responsible for calling + * serdev_controller_put() to discard the allocated controller. + */ +void serdev_controller_remove(struct serdev_controller *ctrl) +{ + int dummy; + + if (!ctrl) + return; + + dummy = device_for_each_child(&ctrl->dev, NULL, + serdev_remove_device); + pm_runtime_disable(&ctrl->dev); + device_del(&ctrl->dev); +} +EXPORT_SYMBOL_GPL(serdev_controller_remove); + +/** + * serdev_driver_register() - Register client driver with serdev core + * @sdrv: client driver to be associated with client-device. + * + * This API will register the client driver with the serdev framework. + * It is typically called from the driver's module-init function. + */ +int __serdev_device_driver_register(struct serdev_device_driver *sdrv, struct module *owner) +{ + sdrv->driver.bus = &serdev_bus_type; + sdrv->driver.owner = owner; + + /* force drivers to async probe so I/O is possible in probe */ + sdrv->driver.probe_type = PROBE_PREFER_ASYNCHRONOUS; + + return driver_register(&sdrv->driver); +} +EXPORT_SYMBOL_GPL(__serdev_device_driver_register); + +static void __exit serdev_exit(void) +{ + bus_unregister(&serdev_bus_type); + ida_destroy(&ctrl_ida); +} +module_exit(serdev_exit); + +static int __init serdev_init(void) +{ + int ret; + + ret = bus_register(&serdev_bus_type); + if (ret) + return ret; + + is_registered = true; + return 0; +} +/* Must be before serial drivers register */ +postcore_initcall(serdev_init); + +MODULE_AUTHOR("Rob Herring "); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Serial attached device bus"); diff --git a/drivers/tty/serdev/serdev-ttyport.c b/drivers/tty/serdev/serdev-ttyport.c new file mode 100644 index 000000000..d367803e2 --- /dev/null +++ b/drivers/tty/serdev/serdev-ttyport.c @@ -0,0 +1,318 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2016-2017 Linaro Ltd., Rob Herring + */ +#include +#include +#include +#include +#include + +#define SERPORT_ACTIVE 1 + +struct serport { + struct tty_port *port; + struct tty_struct *tty; + struct tty_driver *tty_drv; + int tty_idx; + unsigned long flags; +}; + +/* + * Callback functions from the tty port. + */ + +static int ttyport_receive_buf(struct tty_port *port, const unsigned char *cp, + const unsigned char *fp, size_t count) +{ + struct serdev_controller *ctrl = port->client_data; + struct serport *serport = serdev_controller_get_drvdata(ctrl); + int ret; + + if (!test_bit(SERPORT_ACTIVE, &serport->flags)) + return 0; + + ret = serdev_controller_receive_buf(ctrl, cp, count); + + dev_WARN_ONCE(&ctrl->dev, ret < 0 || ret > count, + "receive_buf returns %d (count = %zu)\n", + ret, count); + if (ret < 0) + return 0; + else if (ret > count) + return count; + + return ret; +} + +static void ttyport_write_wakeup(struct tty_port *port) +{ + struct serdev_controller *ctrl = port->client_data; + struct serport *serport = serdev_controller_get_drvdata(ctrl); + struct tty_struct *tty; + + tty = tty_port_tty_get(port); + if (!tty) + return; + + if (test_and_clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags) && + test_bit(SERPORT_ACTIVE, &serport->flags)) + serdev_controller_write_wakeup(ctrl); + + /* Wake up any tty_wait_until_sent() */ + wake_up_interruptible(&tty->write_wait); + + tty_kref_put(tty); +} + +static const struct tty_port_client_operations client_ops = { + .receive_buf = ttyport_receive_buf, + .write_wakeup = ttyport_write_wakeup, +}; + +/* + * Callback functions from the serdev core. + */ + +static int ttyport_write_buf(struct serdev_controller *ctrl, const unsigned char *data, size_t len) +{ + struct serport *serport = serdev_controller_get_drvdata(ctrl); + struct tty_struct *tty = serport->tty; + + if (!test_bit(SERPORT_ACTIVE, &serport->flags)) + return 0; + + set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); + return tty->ops->write(serport->tty, data, len); +} + +static void ttyport_write_flush(struct serdev_controller *ctrl) +{ + struct serport *serport = serdev_controller_get_drvdata(ctrl); + struct tty_struct *tty = serport->tty; + + tty_driver_flush_buffer(tty); +} + +static int ttyport_write_room(struct serdev_controller *ctrl) +{ + struct serport *serport = serdev_controller_get_drvdata(ctrl); + struct tty_struct *tty = serport->tty; + + return tty_write_room(tty); +} + +static int ttyport_open(struct serdev_controller *ctrl) +{ + struct serport *serport = serdev_controller_get_drvdata(ctrl); + struct tty_struct *tty; + struct ktermios ktermios; + int ret; + + tty = tty_init_dev(serport->tty_drv, serport->tty_idx); + if (IS_ERR(tty)) + return PTR_ERR(tty); + serport->tty = tty; + + if (!tty->ops->open || !tty->ops->close) { + ret = -ENODEV; + goto err_unlock; + } + + ret = tty->ops->open(serport->tty, NULL); + if (ret) + goto err_close; + + tty_unlock(serport->tty); + + /* Bring the UART into a known 8 bits no parity hw fc state */ + ktermios = tty->termios; + ktermios.c_iflag &= ~(IGNBRK | BRKINT | PARMRK | ISTRIP | + INLCR | IGNCR | ICRNL | IXON); + ktermios.c_oflag &= ~OPOST; + ktermios.c_lflag &= ~(ECHO | ECHONL | ICANON | ISIG | IEXTEN); + ktermios.c_cflag &= ~(CSIZE | PARENB); + ktermios.c_cflag |= CS8; + ktermios.c_cflag |= CRTSCTS; + /* Hangups are not supported so make sure to ignore carrier detect. */ + ktermios.c_cflag |= CLOCAL; + tty_set_termios(tty, &ktermios); + + set_bit(SERPORT_ACTIVE, &serport->flags); + + return 0; + +err_close: + tty->ops->close(tty, NULL); +err_unlock: + tty_unlock(tty); + tty_release_struct(tty, serport->tty_idx); + + return ret; +} + +static void ttyport_close(struct serdev_controller *ctrl) +{ + struct serport *serport = serdev_controller_get_drvdata(ctrl); + struct tty_struct *tty = serport->tty; + + clear_bit(SERPORT_ACTIVE, &serport->flags); + + tty_lock(tty); + if (tty->ops->close) + tty->ops->close(tty, NULL); + tty_unlock(tty); + + tty_release_struct(tty, serport->tty_idx); +} + +static unsigned int ttyport_set_baudrate(struct serdev_controller *ctrl, unsigned int speed) +{ + struct serport *serport = serdev_controller_get_drvdata(ctrl); + struct tty_struct *tty = serport->tty; + struct ktermios ktermios = tty->termios; + + ktermios.c_cflag &= ~CBAUD; + tty_termios_encode_baud_rate(&ktermios, speed, speed); + + /* tty_set_termios() return not checked as it is always 0 */ + tty_set_termios(tty, &ktermios); + return ktermios.c_ospeed; +} + +static void ttyport_set_flow_control(struct serdev_controller *ctrl, bool enable) +{ + struct serport *serport = serdev_controller_get_drvdata(ctrl); + struct tty_struct *tty = serport->tty; + struct ktermios ktermios = tty->termios; + + if (enable) + ktermios.c_cflag |= CRTSCTS; + else + ktermios.c_cflag &= ~CRTSCTS; + + tty_set_termios(tty, &ktermios); +} + +static int ttyport_set_parity(struct serdev_controller *ctrl, + enum serdev_parity parity) +{ + struct serport *serport = serdev_controller_get_drvdata(ctrl); + struct tty_struct *tty = serport->tty; + struct ktermios ktermios = tty->termios; + + ktermios.c_cflag &= ~(PARENB | PARODD | CMSPAR); + if (parity != SERDEV_PARITY_NONE) { + ktermios.c_cflag |= PARENB; + if (parity == SERDEV_PARITY_ODD) + ktermios.c_cflag |= PARODD; + } + + tty_set_termios(tty, &ktermios); + + if ((tty->termios.c_cflag & (PARENB | PARODD | CMSPAR)) != + (ktermios.c_cflag & (PARENB | PARODD | CMSPAR))) + return -EINVAL; + + return 0; +} + +static void ttyport_wait_until_sent(struct serdev_controller *ctrl, long timeout) +{ + struct serport *serport = serdev_controller_get_drvdata(ctrl); + struct tty_struct *tty = serport->tty; + + tty_wait_until_sent(tty, timeout); +} + +static int ttyport_get_tiocm(struct serdev_controller *ctrl) +{ + struct serport *serport = serdev_controller_get_drvdata(ctrl); + struct tty_struct *tty = serport->tty; + + if (!tty->ops->tiocmget) + return -ENOTSUPP; + + return tty->ops->tiocmget(tty); +} + +static int ttyport_set_tiocm(struct serdev_controller *ctrl, unsigned int set, unsigned int clear) +{ + struct serport *serport = serdev_controller_get_drvdata(ctrl); + struct tty_struct *tty = serport->tty; + + if (!tty->ops->tiocmset) + return -ENOTSUPP; + + return tty->ops->tiocmset(tty, set, clear); +} + +static const struct serdev_controller_ops ctrl_ops = { + .write_buf = ttyport_write_buf, + .write_flush = ttyport_write_flush, + .write_room = ttyport_write_room, + .open = ttyport_open, + .close = ttyport_close, + .set_flow_control = ttyport_set_flow_control, + .set_parity = ttyport_set_parity, + .set_baudrate = ttyport_set_baudrate, + .wait_until_sent = ttyport_wait_until_sent, + .get_tiocm = ttyport_get_tiocm, + .set_tiocm = ttyport_set_tiocm, +}; + +struct device *serdev_tty_port_register(struct tty_port *port, + struct device *parent, + struct tty_driver *drv, int idx) +{ + struct serdev_controller *ctrl; + struct serport *serport; + int ret; + + if (!port || !drv || !parent) + return ERR_PTR(-ENODEV); + + ctrl = serdev_controller_alloc(parent, sizeof(struct serport)); + if (!ctrl) + return ERR_PTR(-ENOMEM); + serport = serdev_controller_get_drvdata(ctrl); + + serport->port = port; + serport->tty_idx = idx; + serport->tty_drv = drv; + + ctrl->ops = &ctrl_ops; + + port->client_ops = &client_ops; + port->client_data = ctrl; + + ret = serdev_controller_add(ctrl); + if (ret) + goto err_reset_data; + + dev_info(&ctrl->dev, "tty port %s%d registered\n", drv->name, idx); + return &ctrl->dev; + +err_reset_data: + port->client_data = NULL; + port->client_ops = &tty_port_default_client_ops; + serdev_controller_put(ctrl); + + return ERR_PTR(ret); +} + +int serdev_tty_port_unregister(struct tty_port *port) +{ + struct serdev_controller *ctrl = port->client_data; + struct serport *serport = serdev_controller_get_drvdata(ctrl); + + if (!serport) + return -ENODEV; + + serdev_controller_remove(ctrl); + port->client_data = NULL; + port->client_ops = &tty_port_default_client_ops; + serdev_controller_put(ctrl); + + return 0; +} diff --git a/drivers/tty/serial/21285.c b/drivers/tty/serial/21285.c new file mode 100644 index 000000000..09baef4cc --- /dev/null +++ b/drivers/tty/serial/21285.c @@ -0,0 +1,542 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for the serial port on the 21285 StrongArm-110 core logic chip. + * + * Based on drivers/char/serial.c + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#define BAUD_BASE (mem_fclk_21285/64) + +#define SERIAL_21285_NAME "ttyFB" +#define SERIAL_21285_MAJOR 204 +#define SERIAL_21285_MINOR 4 + +#define RXSTAT_DUMMY_READ 0x80000000 +#define RXSTAT_FRAME (1 << 0) +#define RXSTAT_PARITY (1 << 1) +#define RXSTAT_OVERRUN (1 << 2) +#define RXSTAT_ANYERR (RXSTAT_FRAME|RXSTAT_PARITY|RXSTAT_OVERRUN) + +#define H_UBRLCR_BREAK (1 << 0) +#define H_UBRLCR_PARENB (1 << 1) +#define H_UBRLCR_PAREVN (1 << 2) +#define H_UBRLCR_STOPB (1 << 3) +#define H_UBRLCR_FIFO (1 << 4) + +static const char serial21285_name[] = "Footbridge UART"; + +/* + * We only need 2 bits of data, so instead of creating a whole structure for + * this, use bits of the private_data pointer of the uart port structure. + */ +#define tx_enabled_bit 0 +#define rx_enabled_bit 1 + +static bool is_enabled(struct uart_port *port, int bit) +{ + unsigned long *private_data = (unsigned long *)&port->private_data; + + if (test_bit(bit, private_data)) + return true; + return false; +} + +static void enable(struct uart_port *port, int bit) +{ + unsigned long *private_data = (unsigned long *)&port->private_data; + + set_bit(bit, private_data); +} + +static void disable(struct uart_port *port, int bit) +{ + unsigned long *private_data = (unsigned long *)&port->private_data; + + clear_bit(bit, private_data); +} + +#define is_tx_enabled(port) is_enabled(port, tx_enabled_bit) +#define tx_enable(port) enable(port, tx_enabled_bit) +#define tx_disable(port) disable(port, tx_enabled_bit) + +#define is_rx_enabled(port) is_enabled(port, rx_enabled_bit) +#define rx_enable(port) enable(port, rx_enabled_bit) +#define rx_disable(port) disable(port, rx_enabled_bit) + +/* + * The documented expression for selecting the divisor is: + * BAUD_BASE / baud - 1 + * However, typically BAUD_BASE is not divisible by baud, so + * we want to select the divisor that gives us the minimum + * error. Therefore, we want: + * int(BAUD_BASE / baud - 0.5) -> + * int(BAUD_BASE / baud - (baud >> 1) / baud) -> + * int((BAUD_BASE - (baud >> 1)) / baud) + */ + +static void serial21285_stop_tx(struct uart_port *port) +{ + if (is_tx_enabled(port)) { + disable_irq_nosync(IRQ_CONTX); + tx_disable(port); + } +} + +static void serial21285_start_tx(struct uart_port *port) +{ + if (!is_tx_enabled(port)) { + enable_irq(IRQ_CONTX); + tx_enable(port); + } +} + +static void serial21285_stop_rx(struct uart_port *port) +{ + if (is_rx_enabled(port)) { + disable_irq_nosync(IRQ_CONRX); + rx_disable(port); + } +} + +static irqreturn_t serial21285_rx_chars(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + unsigned int status, ch, flag, rxs, max_count = 256; + + status = *CSR_UARTFLG; + while (!(status & 0x10) && max_count--) { + ch = *CSR_UARTDR; + flag = TTY_NORMAL; + port->icount.rx++; + + rxs = *CSR_RXSTAT | RXSTAT_DUMMY_READ; + if (unlikely(rxs & RXSTAT_ANYERR)) { + if (rxs & RXSTAT_PARITY) + port->icount.parity++; + else if (rxs & RXSTAT_FRAME) + port->icount.frame++; + if (rxs & RXSTAT_OVERRUN) + port->icount.overrun++; + + rxs &= port->read_status_mask; + + if (rxs & RXSTAT_PARITY) + flag = TTY_PARITY; + else if (rxs & RXSTAT_FRAME) + flag = TTY_FRAME; + } + + uart_insert_char(port, rxs, RXSTAT_OVERRUN, ch, flag); + + status = *CSR_UARTFLG; + } + tty_flip_buffer_push(&port->state->port); + + return IRQ_HANDLED; +} + +static irqreturn_t serial21285_tx_chars(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + struct circ_buf *xmit = &port->state->xmit; + int count = 256; + + if (port->x_char) { + *CSR_UARTDR = port->x_char; + port->icount.tx++; + port->x_char = 0; + goto out; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + serial21285_stop_tx(port); + goto out; + } + + do { + *CSR_UARTDR = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0 && !(*CSR_UARTFLG & 0x20)); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + serial21285_stop_tx(port); + + out: + return IRQ_HANDLED; +} + +static unsigned int serial21285_tx_empty(struct uart_port *port) +{ + return (*CSR_UARTFLG & 8) ? 0 : TIOCSER_TEMT; +} + +/* no modem control lines */ +static unsigned int serial21285_get_mctrl(struct uart_port *port) +{ + return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; +} + +static void serial21285_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} + +static void serial21285_break_ctl(struct uart_port *port, int break_state) +{ + unsigned long flags; + unsigned int h_lcr; + + spin_lock_irqsave(&port->lock, flags); + h_lcr = *CSR_H_UBRLCR; + if (break_state) + h_lcr |= H_UBRLCR_BREAK; + else + h_lcr &= ~H_UBRLCR_BREAK; + *CSR_H_UBRLCR = h_lcr; + spin_unlock_irqrestore(&port->lock, flags); +} + +static int serial21285_startup(struct uart_port *port) +{ + int ret; + + tx_enable(port); + rx_enable(port); + + ret = request_irq(IRQ_CONRX, serial21285_rx_chars, 0, + serial21285_name, port); + if (ret == 0) { + ret = request_irq(IRQ_CONTX, serial21285_tx_chars, 0, + serial21285_name, port); + if (ret) + free_irq(IRQ_CONRX, port); + } + + return ret; +} + +static void serial21285_shutdown(struct uart_port *port) +{ + free_irq(IRQ_CONTX, port); + free_irq(IRQ_CONRX, port); +} + +static void +serial21285_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + unsigned long flags; + unsigned int baud, quot, h_lcr, b; + + /* + * We don't support modem control lines. + */ + termios->c_cflag &= ~(HUPCL | CRTSCTS | CMSPAR); + termios->c_cflag |= CLOCAL; + + /* + * We don't support BREAK character recognition. + */ + termios->c_iflag &= ~(IGNBRK | BRKINT); + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + b = port->uartclk / (16 * quot); + tty_termios_encode_baud_rate(termios, b, b); + + switch (termios->c_cflag & CSIZE) { + case CS5: + h_lcr = 0x00; + break; + case CS6: + h_lcr = 0x20; + break; + case CS7: + h_lcr = 0x40; + break; + default: /* CS8 */ + h_lcr = 0x60; + break; + } + + if (termios->c_cflag & CSTOPB) + h_lcr |= H_UBRLCR_STOPB; + if (termios->c_cflag & PARENB) { + h_lcr |= H_UBRLCR_PARENB; + if (!(termios->c_cflag & PARODD)) + h_lcr |= H_UBRLCR_PAREVN; + } + + if (port->fifosize) + h_lcr |= H_UBRLCR_FIFO; + + spin_lock_irqsave(&port->lock, flags); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + /* + * Which character status flags are we interested in? + */ + port->read_status_mask = RXSTAT_OVERRUN; + if (termios->c_iflag & INPCK) + port->read_status_mask |= RXSTAT_FRAME | RXSTAT_PARITY; + + /* + * Which character status flags should we ignore? + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= RXSTAT_FRAME | RXSTAT_PARITY; + if (termios->c_iflag & IGNBRK && termios->c_iflag & IGNPAR) + port->ignore_status_mask |= RXSTAT_OVERRUN; + + /* + * Ignore all characters if CREAD is not set. + */ + if ((termios->c_cflag & CREAD) == 0) + port->ignore_status_mask |= RXSTAT_DUMMY_READ; + + quot -= 1; + + *CSR_UARTCON = 0; + *CSR_L_UBRLCR = quot & 0xff; + *CSR_M_UBRLCR = (quot >> 8) & 0x0f; + *CSR_H_UBRLCR = h_lcr; + *CSR_UARTCON = 1; + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *serial21285_type(struct uart_port *port) +{ + return port->type == PORT_21285 ? "DC21285" : NULL; +} + +static void serial21285_release_port(struct uart_port *port) +{ + release_mem_region(port->mapbase, 32); +} + +static int serial21285_request_port(struct uart_port *port) +{ + return request_mem_region(port->mapbase, 32, serial21285_name) + != NULL ? 0 : -EBUSY; +} + +static void serial21285_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE && serial21285_request_port(port) == 0) + port->type = PORT_21285; +} + +/* + * verify the new serial_struct (for TIOCSSERIAL). + */ +static int serial21285_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + int ret = 0; + if (ser->type != PORT_UNKNOWN && ser->type != PORT_21285) + ret = -EINVAL; + if (ser->irq <= 0) + ret = -EINVAL; + if (ser->baud_base != port->uartclk / 16) + ret = -EINVAL; + return ret; +} + +static const struct uart_ops serial21285_ops = { + .tx_empty = serial21285_tx_empty, + .get_mctrl = serial21285_get_mctrl, + .set_mctrl = serial21285_set_mctrl, + .stop_tx = serial21285_stop_tx, + .start_tx = serial21285_start_tx, + .stop_rx = serial21285_stop_rx, + .break_ctl = serial21285_break_ctl, + .startup = serial21285_startup, + .shutdown = serial21285_shutdown, + .set_termios = serial21285_set_termios, + .type = serial21285_type, + .release_port = serial21285_release_port, + .request_port = serial21285_request_port, + .config_port = serial21285_config_port, + .verify_port = serial21285_verify_port, +}; + +static struct uart_port serial21285_port = { + .mapbase = 0x42000160, + .iotype = UPIO_MEM, + .irq = 0, + .fifosize = 16, + .ops = &serial21285_ops, + .flags = UPF_BOOT_AUTOCONF, +}; + +static void serial21285_setup_ports(void) +{ + serial21285_port.uartclk = mem_fclk_21285 / 4; +} + +#ifdef CONFIG_SERIAL_21285_CONSOLE +static void serial21285_console_putchar(struct uart_port *port, int ch) +{ + while (*CSR_UARTFLG & 0x20) + barrier(); + *CSR_UARTDR = ch; +} + +static void +serial21285_console_write(struct console *co, const char *s, + unsigned int count) +{ + uart_console_write(&serial21285_port, s, count, serial21285_console_putchar); +} + +static void __init +serial21285_get_options(struct uart_port *port, int *baud, + int *parity, int *bits) +{ + if (*CSR_UARTCON == 1) { + unsigned int tmp; + + tmp = *CSR_H_UBRLCR; + switch (tmp & 0x60) { + case 0x00: + *bits = 5; + break; + case 0x20: + *bits = 6; + break; + case 0x40: + *bits = 7; + break; + default: + case 0x60: + *bits = 8; + break; + } + + if (tmp & H_UBRLCR_PARENB) { + *parity = 'o'; + if (tmp & H_UBRLCR_PAREVN) + *parity = 'e'; + } + + tmp = *CSR_L_UBRLCR | (*CSR_M_UBRLCR << 8); + + *baud = port->uartclk / (16 * (tmp + 1)); + } +} + +static int __init serial21285_console_setup(struct console *co, char *options) +{ + struct uart_port *port = &serial21285_port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (machine_is_personal_server()) + baud = 57600; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + serial21285_get_options(port, &baud, &parity, &bits); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver serial21285_reg; + +static struct console serial21285_console = +{ + .name = SERIAL_21285_NAME, + .write = serial21285_console_write, + .device = uart_console_device, + .setup = serial21285_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &serial21285_reg, +}; + +static int __init rs285_console_init(void) +{ + serial21285_setup_ports(); + register_console(&serial21285_console); + return 0; +} +console_initcall(rs285_console_init); + +#define SERIAL_21285_CONSOLE &serial21285_console +#else +#define SERIAL_21285_CONSOLE NULL +#endif + +static struct uart_driver serial21285_reg = { + .owner = THIS_MODULE, + .driver_name = "ttyFB", + .dev_name = "ttyFB", + .major = SERIAL_21285_MAJOR, + .minor = SERIAL_21285_MINOR, + .nr = 1, + .cons = SERIAL_21285_CONSOLE, +}; + +static int __init serial21285_init(void) +{ + int ret; + + printk(KERN_INFO "Serial: 21285 driver\n"); + + serial21285_setup_ports(); + + ret = uart_register_driver(&serial21285_reg); + if (ret == 0) + uart_add_one_port(&serial21285_reg, &serial21285_port); + + return ret; +} + +static void __exit serial21285_exit(void) +{ + uart_remove_one_port(&serial21285_reg, &serial21285_port); + uart_unregister_driver(&serial21285_reg); +} + +module_init(serial21285_init); +module_exit(serial21285_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Intel Footbridge (21285) serial driver"); +MODULE_ALIAS_CHARDEV(SERIAL_21285_MAJOR, SERIAL_21285_MINOR); diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h new file mode 100644 index 000000000..61b11490a --- /dev/null +++ b/drivers/tty/serial/8250/8250.h @@ -0,0 +1,381 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Driver for 8250/16550-type serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright (C) 2001 Russell King. + */ + +#include +#include +#include + +#include "../serial_mctrl_gpio.h" + +struct uart_8250_dma { + int (*tx_dma)(struct uart_8250_port *p); + int (*rx_dma)(struct uart_8250_port *p); + + /* Filter function */ + dma_filter_fn fn; + /* Parameter to the filter function */ + void *rx_param; + void *tx_param; + + struct dma_slave_config rxconf; + struct dma_slave_config txconf; + + struct dma_chan *rxchan; + struct dma_chan *txchan; + + /* Device address base for DMA operations */ + phys_addr_t rx_dma_addr; + phys_addr_t tx_dma_addr; + + /* DMA address of the buffer in memory */ + dma_addr_t rx_addr; + dma_addr_t tx_addr; + + dma_cookie_t rx_cookie; + dma_cookie_t tx_cookie; + + void *rx_buf; + + size_t rx_size; + size_t tx_size; + + unsigned char tx_running; + unsigned char tx_err; + unsigned char rx_running; +}; + +struct old_serial_port { + unsigned int uart; + unsigned int baud_base; + unsigned int port; + unsigned int irq; + upf_t flags; + unsigned char io_type; + unsigned char __iomem *iomem_base; + unsigned short iomem_reg_shift; +}; + +struct serial8250_config { + const char *name; + unsigned short fifo_size; + unsigned short tx_loadsz; + unsigned char fcr; + unsigned char rxtrig_bytes[UART_FCR_R_TRIG_MAX_STATE]; + unsigned int flags; +}; + +#define UART_CAP_FIFO (1 << 8) /* UART has FIFO */ +#define UART_CAP_EFR (1 << 9) /* UART has EFR */ +#define UART_CAP_SLEEP (1 << 10) /* UART has IER sleep */ +#define UART_CAP_AFE (1 << 11) /* MCR-based hw flow control */ +#define UART_CAP_UUE (1 << 12) /* UART needs IER bit 6 set (Xscale) */ +#define UART_CAP_RTOIE (1 << 13) /* UART needs IER bit 4 set (Xscale, Tegra) */ +#define UART_CAP_HFIFO (1 << 14) /* UART has a "hidden" FIFO */ +#define UART_CAP_RPM (1 << 15) /* Runtime PM is active while idle */ +#define UART_CAP_IRDA (1 << 16) /* UART supports IrDA line discipline */ +#define UART_CAP_MINI (1 << 17) /* Mini UART on BCM283X family lacks: + * STOP PARITY EPAR SPAR WLEN5 WLEN6 + */ + +#define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */ +#define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */ +#define UART_BUG_NOMSR (1 << 2) /* UART has buggy MSR status bits (Au1x00) */ +#define UART_BUG_THRE (1 << 3) /* UART has buggy THRE reassertion */ +#define UART_BUG_TXRACE (1 << 5) /* UART Tx fails to set remote DR */ + + +#ifdef CONFIG_SERIAL_8250_SHARE_IRQ +#define SERIAL8250_SHARE_IRQS 1 +#else +#define SERIAL8250_SHARE_IRQS 0 +#endif + +#define SERIAL8250_PORT_FLAGS(_base, _irq, _flags) \ + { \ + .iobase = _base, \ + .irq = _irq, \ + .uartclk = 1843200, \ + .iotype = UPIO_PORT, \ + .flags = UPF_BOOT_AUTOCONF | (_flags), \ + } + +#define SERIAL8250_PORT(_base, _irq) SERIAL8250_PORT_FLAGS(_base, _irq, 0) + + +static inline int serial_in(struct uart_8250_port *up, int offset) +{ + return up->port.serial_in(&up->port, offset); +} + +static inline void serial_out(struct uart_8250_port *up, int offset, int value) +{ + up->port.serial_out(&up->port, offset, value); +} + +/* + * For the 16C950 + */ +static void serial_icr_write(struct uart_8250_port *up, int offset, int value) +{ + serial_out(up, UART_SCR, offset); + serial_out(up, UART_ICR, value); +} + +static unsigned int __maybe_unused serial_icr_read(struct uart_8250_port *up, + int offset) +{ + unsigned int value; + + serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD); + serial_out(up, UART_SCR, offset); + value = serial_in(up, UART_ICR); + serial_icr_write(up, UART_ACR, up->acr); + + return value; +} + +void serial8250_clear_and_reinit_fifos(struct uart_8250_port *p); + +static inline int serial_dl_read(struct uart_8250_port *up) +{ + return up->dl_read(up); +} + +static inline void serial_dl_write(struct uart_8250_port *up, int value) +{ + up->dl_write(up, value); +} + +static inline bool serial8250_set_THRI(struct uart_8250_port *up) +{ + if (up->ier & UART_IER_THRI) + return false; + up->ier |= UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + return true; +} + +static inline bool serial8250_clear_THRI(struct uart_8250_port *up) +{ + if (!(up->ier & UART_IER_THRI)) + return false; + up->ier &= ~UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + return true; +} + +struct uart_8250_port *serial8250_get_port(int line); + +void serial8250_rpm_get(struct uart_8250_port *p); +void serial8250_rpm_put(struct uart_8250_port *p); + +void serial8250_rpm_get_tx(struct uart_8250_port *p); +void serial8250_rpm_put_tx(struct uart_8250_port *p); + +int serial8250_em485_config(struct uart_port *port, struct serial_rs485 *rs485); +void serial8250_em485_start_tx(struct uart_8250_port *p); +void serial8250_em485_stop_tx(struct uart_8250_port *p); +void serial8250_em485_destroy(struct uart_8250_port *p); + +/* MCR <-> TIOCM conversion */ +static inline int serial8250_TIOCM_to_MCR(int tiocm) +{ + int mcr = 0; + + if (tiocm & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (tiocm & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (tiocm & TIOCM_OUT1) + mcr |= UART_MCR_OUT1; + if (tiocm & TIOCM_OUT2) + mcr |= UART_MCR_OUT2; + if (tiocm & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + return mcr; +} + +static inline int serial8250_MCR_to_TIOCM(int mcr) +{ + int tiocm = 0; + + if (mcr & UART_MCR_RTS) + tiocm |= TIOCM_RTS; + if (mcr & UART_MCR_DTR) + tiocm |= TIOCM_DTR; + if (mcr & UART_MCR_OUT1) + tiocm |= TIOCM_OUT1; + if (mcr & UART_MCR_OUT2) + tiocm |= TIOCM_OUT2; + if (mcr & UART_MCR_LOOP) + tiocm |= TIOCM_LOOP; + + return tiocm; +} + +/* MSR <-> TIOCM conversion */ +static inline int serial8250_MSR_to_TIOCM(int msr) +{ + int tiocm = 0; + + if (msr & UART_MSR_DCD) + tiocm |= TIOCM_CAR; + if (msr & UART_MSR_RI) + tiocm |= TIOCM_RNG; + if (msr & UART_MSR_DSR) + tiocm |= TIOCM_DSR; + if (msr & UART_MSR_CTS) + tiocm |= TIOCM_CTS; + + return tiocm; +} + +static inline void serial8250_out_MCR(struct uart_8250_port *up, int value) +{ + serial_out(up, UART_MCR, value); + + if (up->gpios) + mctrl_gpio_set(up->gpios, serial8250_MCR_to_TIOCM(value)); +} + +static inline int serial8250_in_MCR(struct uart_8250_port *up) +{ + int mctrl; + + mctrl = serial_in(up, UART_MCR); + + if (up->gpios) { + unsigned int mctrl_gpio = 0; + + mctrl_gpio = mctrl_gpio_get_outputs(up->gpios, &mctrl_gpio); + mctrl |= serial8250_TIOCM_to_MCR(mctrl_gpio); + } + + return mctrl; +} + +#if defined(__alpha__) && !defined(CONFIG_PCI) +/* + * Digital did something really horribly wrong with the OUT1 and OUT2 + * lines on at least some ALPHA's. The failure mode is that if either + * is cleared, the machine locks up with endless interrupts. + */ +#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2 | UART_MCR_OUT1) +#else +#define ALPHA_KLUDGE_MCR 0 +#endif + +#ifdef CONFIG_SERIAL_8250_PNP +int serial8250_pnp_init(void); +void serial8250_pnp_exit(void); +#else +static inline int serial8250_pnp_init(void) { return 0; } +static inline void serial8250_pnp_exit(void) { } +#endif + +#ifdef CONFIG_SERIAL_8250_FINTEK +int fintek_8250_probe(struct uart_8250_port *uart); +#else +static inline int fintek_8250_probe(struct uart_8250_port *uart) { return 0; } +#endif + +#ifdef CONFIG_ARCH_OMAP1 +static inline int is_omap1_8250(struct uart_8250_port *pt) +{ + int res; + + switch (pt->port.mapbase) { + case OMAP1_UART1_BASE: + case OMAP1_UART2_BASE: + case OMAP1_UART3_BASE: + res = 1; + break; + default: + res = 0; + break; + } + + return res; +} + +static inline int is_omap1510_8250(struct uart_8250_port *pt) +{ + if (!cpu_is_omap1510()) + return 0; + + return is_omap1_8250(pt); +} +#else +static inline int is_omap1_8250(struct uart_8250_port *pt) +{ + return 0; +} +static inline int is_omap1510_8250(struct uart_8250_port *pt) +{ + return 0; +} +#endif + +#ifdef CONFIG_SERIAL_8250_DMA +extern int serial8250_tx_dma(struct uart_8250_port *); +extern int serial8250_rx_dma(struct uart_8250_port *); +extern void serial8250_rx_dma_flush(struct uart_8250_port *); +extern int serial8250_request_dma(struct uart_8250_port *); +extern void serial8250_release_dma(struct uart_8250_port *); + +static inline bool serial8250_tx_dma_running(struct uart_8250_port *p) +{ + struct uart_8250_dma *dma = p->dma; + + return dma && dma->tx_running; +} +#else +static inline int serial8250_tx_dma(struct uart_8250_port *p) +{ + return -1; +} +static inline int serial8250_rx_dma(struct uart_8250_port *p) +{ + return -1; +} +static inline void serial8250_rx_dma_flush(struct uart_8250_port *p) { } +static inline int serial8250_request_dma(struct uart_8250_port *p) +{ + return -1; +} +static inline void serial8250_release_dma(struct uart_8250_port *p) { } + +static inline bool serial8250_tx_dma_running(struct uart_8250_port *p) +{ + return false; +} +#endif + +static inline int ns16550a_goto_highspeed(struct uart_8250_port *up) +{ + unsigned char status; + + status = serial_in(up, 0x04); /* EXCR2 */ +#define PRESL(x) ((x) & 0x30) + if (PRESL(status) == 0x10) { + /* already in high speed mode */ + return 0; + } else { + status &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */ + status |= 0x10; /* 1.625 divisor for baud_base --> 921600 */ + serial_out(up, 0x04, status); + } + return 1; +} + +static inline int serial_index(struct uart_port *port) +{ + return port->minor - 64; +} diff --git a/drivers/tty/serial/8250/8250_accent.c b/drivers/tty/serial/8250/8250_accent.c new file mode 100644 index 000000000..1691f1a57 --- /dev/null +++ b/drivers/tty/serial/8250/8250_accent.c @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2005 Russell King. + * Data taken from include/asm-i386/serial.h + */ +#include +#include +#include + +#include "8250.h" + +static struct plat_serial8250_port accent_data[] = { + SERIAL8250_PORT(0x330, 4), + SERIAL8250_PORT(0x338, 4), + { }, +}; + +static struct platform_device accent_device = { + .name = "serial8250", + .id = PLAT8250_DEV_ACCENT, + .dev = { + .platform_data = accent_data, + }, +}; + +static int __init accent_init(void) +{ + return platform_device_register(&accent_device); +} + +module_init(accent_init); + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("8250 serial probe module for Accent Async cards"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250/8250_acorn.c b/drivers/tty/serial/8250/8250_acorn.c new file mode 100644 index 000000000..758c4aa20 --- /dev/null +++ b/drivers/tty/serial/8250/8250_acorn.c @@ -0,0 +1,138 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * linux/drivers/serial/acorn.c + * + * Copyright (C) 1996-2003 Russell King. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "8250.h" + +#define MAX_PORTS 3 + +struct serial_card_type { + unsigned int num_ports; + unsigned int uartclk; + unsigned int type; + unsigned int offset[MAX_PORTS]; +}; + +struct serial_card_info { + unsigned int num_ports; + int ports[MAX_PORTS]; + void __iomem *vaddr; +}; + +static int +serial_card_probe(struct expansion_card *ec, const struct ecard_id *id) +{ + struct serial_card_info *info; + struct serial_card_type *type = id->data; + struct uart_8250_port uart; + unsigned long bus_addr; + unsigned int i; + + info = kzalloc(sizeof(struct serial_card_info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->num_ports = type->num_ports; + + bus_addr = ecard_resource_start(ec, type->type); + info->vaddr = ecardm_iomap(ec, type->type, 0, 0); + if (!info->vaddr) { + kfree(info); + return -ENOMEM; + } + + ecard_set_drvdata(ec, info); + + memset(&uart, 0, sizeof(struct uart_8250_port)); + uart.port.irq = ec->irq; + uart.port.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; + uart.port.uartclk = type->uartclk; + uart.port.iotype = UPIO_MEM; + uart.port.regshift = 2; + uart.port.dev = &ec->dev; + + for (i = 0; i < info->num_ports; i++) { + uart.port.membase = info->vaddr + type->offset[i]; + uart.port.mapbase = bus_addr + type->offset[i]; + + info->ports[i] = serial8250_register_8250_port(&uart); + } + + return 0; +} + +static void serial_card_remove(struct expansion_card *ec) +{ + struct serial_card_info *info = ecard_get_drvdata(ec); + int i; + + ecard_set_drvdata(ec, NULL); + + for (i = 0; i < info->num_ports; i++) + if (info->ports[i] > 0) + serial8250_unregister_port(info->ports[i]); + + kfree(info); +} + +static struct serial_card_type atomwide_type = { + .num_ports = 3, + .uartclk = 7372800, + .type = ECARD_RES_IOCSLOW, + .offset = { 0x2800, 0x2400, 0x2000 }, +}; + +static struct serial_card_type serport_type = { + .num_ports = 2, + .uartclk = 3686400, + .type = ECARD_RES_IOCSLOW, + .offset = { 0x2000, 0x2020 }, +}; + +static const struct ecard_id serial_cids[] = { + { MANU_ATOMWIDE, PROD_ATOMWIDE_3PSERIAL, &atomwide_type }, + { MANU_SERPORT, PROD_SERPORT_DSPORT, &serport_type }, + { 0xffff, 0xffff } +}; + +static struct ecard_driver serial_card_driver = { + .probe = serial_card_probe, + .remove = serial_card_remove, + .id_table = serial_cids, + .drv = { + .name = "8250_acorn", + }, +}; + +static int __init serial_card_init(void) +{ + return ecard_register_driver(&serial_card_driver); +} + +static void __exit serial_card_exit(void) +{ + ecard_remove_driver(&serial_card_driver); +} + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("Acorn 8250-compatible serial port expansion card driver"); +MODULE_LICENSE("GPL"); + +module_init(serial_card_init); +module_exit(serial_card_exit); diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c new file mode 100644 index 000000000..ec0d1da71 --- /dev/null +++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c @@ -0,0 +1,532 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Serial Port driver for Aspeed VUART device + * + * Copyright (C) 2016 Jeremy Kerr , IBM Corp. + * Copyright (C) 2006 Arnd Bergmann , IBM Corp. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "8250.h" + +#define ASPEED_VUART_GCRA 0x20 +#define ASPEED_VUART_GCRA_VUART_EN BIT(0) +#define ASPEED_VUART_GCRA_HOST_SIRQ_POLARITY BIT(1) +#define ASPEED_VUART_GCRA_DISABLE_HOST_TX_DISCARD BIT(5) +#define ASPEED_VUART_GCRB 0x24 +#define ASPEED_VUART_GCRB_HOST_SIRQ_MASK GENMASK(7, 4) +#define ASPEED_VUART_GCRB_HOST_SIRQ_SHIFT 4 +#define ASPEED_VUART_ADDRL 0x28 +#define ASPEED_VUART_ADDRH 0x2c + +struct aspeed_vuart { + struct device *dev; + void __iomem *regs; + struct clk *clk; + int line; + struct timer_list unthrottle_timer; + struct uart_8250_port *port; +}; + +/* + * If we fill the tty flip buffers, we throttle the data ready interrupt + * to prevent dropped characters. This timeout defines how long we wait + * to (conditionally, depending on buffer state) unthrottle. + */ +static const int unthrottle_timeout = HZ/10; + +/* + * The VUART is basically two UART 'front ends' connected by their FIFO + * (no actual serial line in between). One is on the BMC side (management + * controller) and one is on the host CPU side. + * + * It allows the BMC to provide to the host a "UART" that pipes into + * the BMC itself and can then be turned by the BMC into a network console + * of some sort for example. + * + * This driver is for the BMC side. The sysfs files allow the BMC + * userspace which owns the system configuration policy, to specify + * at what IO port and interrupt number the host side will appear + * to the host on the Host <-> BMC LPC bus. It could be different on a + * different system (though most of them use 3f8/4). + */ + +static ssize_t lpc_address_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct aspeed_vuart *vuart = dev_get_drvdata(dev); + u16 addr; + + addr = (readb(vuart->regs + ASPEED_VUART_ADDRH) << 8) | + (readb(vuart->regs + ASPEED_VUART_ADDRL)); + + return snprintf(buf, PAGE_SIZE - 1, "0x%x\n", addr); +} + +static ssize_t lpc_address_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct aspeed_vuart *vuart = dev_get_drvdata(dev); + unsigned long val; + int err; + + err = kstrtoul(buf, 0, &val); + if (err) + return err; + + writeb(val >> 8, vuart->regs + ASPEED_VUART_ADDRH); + writeb(val >> 0, vuart->regs + ASPEED_VUART_ADDRL); + + return count; +} + +static DEVICE_ATTR_RW(lpc_address); + +static ssize_t sirq_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct aspeed_vuart *vuart = dev_get_drvdata(dev); + u8 reg; + + reg = readb(vuart->regs + ASPEED_VUART_GCRB); + reg &= ASPEED_VUART_GCRB_HOST_SIRQ_MASK; + reg >>= ASPEED_VUART_GCRB_HOST_SIRQ_SHIFT; + + return snprintf(buf, PAGE_SIZE - 1, "%u\n", reg); +} + +static ssize_t sirq_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct aspeed_vuart *vuart = dev_get_drvdata(dev); + unsigned long val; + int err; + u8 reg; + + err = kstrtoul(buf, 0, &val); + if (err) + return err; + + val <<= ASPEED_VUART_GCRB_HOST_SIRQ_SHIFT; + val &= ASPEED_VUART_GCRB_HOST_SIRQ_MASK; + + reg = readb(vuart->regs + ASPEED_VUART_GCRB); + reg &= ~ASPEED_VUART_GCRB_HOST_SIRQ_MASK; + reg |= val; + writeb(reg, vuart->regs + ASPEED_VUART_GCRB); + + return count; +} + +static DEVICE_ATTR_RW(sirq); + +static ssize_t sirq_polarity_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct aspeed_vuart *vuart = dev_get_drvdata(dev); + u8 reg; + + reg = readb(vuart->regs + ASPEED_VUART_GCRA); + reg &= ASPEED_VUART_GCRA_HOST_SIRQ_POLARITY; + + return snprintf(buf, PAGE_SIZE - 1, "%u\n", reg ? 1 : 0); +} + +static void aspeed_vuart_set_sirq_polarity(struct aspeed_vuart *vuart, + bool polarity) +{ + u8 reg = readb(vuart->regs + ASPEED_VUART_GCRA); + + if (polarity) + reg |= ASPEED_VUART_GCRA_HOST_SIRQ_POLARITY; + else + reg &= ~ASPEED_VUART_GCRA_HOST_SIRQ_POLARITY; + + writeb(reg, vuart->regs + ASPEED_VUART_GCRA); +} + +static ssize_t sirq_polarity_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct aspeed_vuart *vuart = dev_get_drvdata(dev); + unsigned long val; + int err; + + err = kstrtoul(buf, 0, &val); + if (err) + return err; + + aspeed_vuart_set_sirq_polarity(vuart, val != 0); + + return count; +} + +static DEVICE_ATTR_RW(sirq_polarity); + +static struct attribute *aspeed_vuart_attrs[] = { + &dev_attr_sirq.attr, + &dev_attr_sirq_polarity.attr, + &dev_attr_lpc_address.attr, + NULL, +}; + +static const struct attribute_group aspeed_vuart_attr_group = { + .attrs = aspeed_vuart_attrs, +}; + +static void aspeed_vuart_set_enabled(struct aspeed_vuart *vuart, bool enabled) +{ + u8 reg = readb(vuart->regs + ASPEED_VUART_GCRA); + + if (enabled) + reg |= ASPEED_VUART_GCRA_VUART_EN; + else + reg &= ~ASPEED_VUART_GCRA_VUART_EN; + + writeb(reg, vuart->regs + ASPEED_VUART_GCRA); +} + +static void aspeed_vuart_set_host_tx_discard(struct aspeed_vuart *vuart, + bool discard) +{ + u8 reg; + + reg = readb(vuart->regs + ASPEED_VUART_GCRA); + + /* If the DISABLE_HOST_TX_DISCARD bit is set, discard is disabled */ + if (!discard) + reg |= ASPEED_VUART_GCRA_DISABLE_HOST_TX_DISCARD; + else + reg &= ~ASPEED_VUART_GCRA_DISABLE_HOST_TX_DISCARD; + + writeb(reg, vuart->regs + ASPEED_VUART_GCRA); +} + +static int aspeed_vuart_startup(struct uart_port *uart_port) +{ + struct uart_8250_port *uart_8250_port = up_to_u8250p(uart_port); + struct aspeed_vuart *vuart = uart_8250_port->port.private_data; + int rc; + + rc = serial8250_do_startup(uart_port); + if (rc) + return rc; + + aspeed_vuart_set_host_tx_discard(vuart, false); + + return 0; +} + +static void aspeed_vuart_shutdown(struct uart_port *uart_port) +{ + struct uart_8250_port *uart_8250_port = up_to_u8250p(uart_port); + struct aspeed_vuart *vuart = uart_8250_port->port.private_data; + + aspeed_vuart_set_host_tx_discard(vuart, true); + + serial8250_do_shutdown(uart_port); +} + +static void __aspeed_vuart_set_throttle(struct uart_8250_port *up, + bool throttle) +{ + unsigned char irqs = UART_IER_RLSI | UART_IER_RDI; + + up->ier &= ~irqs; + if (!throttle) + up->ier |= irqs; + serial_out(up, UART_IER, up->ier); +} +static void aspeed_vuart_set_throttle(struct uart_port *port, bool throttle) +{ + struct uart_8250_port *up = up_to_u8250p(port); + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + __aspeed_vuart_set_throttle(up, throttle); + spin_unlock_irqrestore(&port->lock, flags); +} + +static void aspeed_vuart_throttle(struct uart_port *port) +{ + aspeed_vuart_set_throttle(port, true); +} + +static void aspeed_vuart_unthrottle(struct uart_port *port) +{ + aspeed_vuart_set_throttle(port, false); +} + +static void aspeed_vuart_unthrottle_exp(struct timer_list *timer) +{ + struct aspeed_vuart *vuart = from_timer(vuart, timer, unthrottle_timer); + struct uart_8250_port *up = vuart->port; + + if (!tty_buffer_space_avail(&up->port.state->port)) { + mod_timer(&vuart->unthrottle_timer, + jiffies + unthrottle_timeout); + return; + } + + aspeed_vuart_unthrottle(&up->port); +} + +/* + * Custom interrupt handler to manage finer-grained flow control. Although we + * have throttle/unthrottle callbacks, we've seen that the VUART device can + * deliver characters faster than the ldisc has a chance to check buffer space + * against the throttle threshold. This results in dropped characters before + * the throttle. + * + * We do this by checking for flip buffer space before RX. If we have no space, + * throttle now and schedule an unthrottle for later, once the ldisc has had + * a chance to drain the buffers. + */ +static int aspeed_vuart_handle_irq(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + unsigned int iir, lsr; + unsigned long flags; + int space, count; + + iir = serial_port_in(port, UART_IIR); + + if (iir & UART_IIR_NO_INT) + return 0; + + spin_lock_irqsave(&port->lock, flags); + + lsr = serial_port_in(port, UART_LSR); + + if (lsr & (UART_LSR_DR | UART_LSR_BI)) { + space = tty_buffer_space_avail(&port->state->port); + + if (!space) { + /* throttle and schedule an unthrottle later */ + struct aspeed_vuart *vuart = port->private_data; + __aspeed_vuart_set_throttle(up, true); + + if (!timer_pending(&vuart->unthrottle_timer)) { + vuart->port = up; + mod_timer(&vuart->unthrottle_timer, + jiffies + unthrottle_timeout); + } + + } else { + count = min(space, 256); + + do { + serial8250_read_char(up, lsr); + lsr = serial_in(up, UART_LSR); + if (--count == 0) + break; + } while (lsr & (UART_LSR_DR | UART_LSR_BI)); + + tty_flip_buffer_push(&port->state->port); + } + } + + serial8250_modem_status(up); + if (lsr & UART_LSR_THRE) + serial8250_tx_chars(up); + + uart_unlock_and_check_sysrq(port, flags); + + return 1; +} + +static void aspeed_vuart_auto_configure_sirq_polarity( + struct aspeed_vuart *vuart, struct device_node *syscon_np, + u32 reg_offset, u32 reg_mask) +{ + struct regmap *regmap; + u32 value; + + regmap = syscon_node_to_regmap(syscon_np); + if (IS_ERR(regmap)) { + dev_warn(vuart->dev, + "could not get regmap for aspeed,sirq-polarity-sense\n"); + return; + } + if (regmap_read(regmap, reg_offset, &value)) { + dev_warn(vuart->dev, "could not read hw strap table\n"); + return; + } + + aspeed_vuart_set_sirq_polarity(vuart, (value & reg_mask) == 0); +} + +static int aspeed_vuart_probe(struct platform_device *pdev) +{ + struct of_phandle_args sirq_polarity_sense_args; + struct uart_8250_port port; + struct aspeed_vuart *vuart; + struct device_node *np; + struct resource *res; + u32 clk, prop; + int rc; + + np = pdev->dev.of_node; + + vuart = devm_kzalloc(&pdev->dev, sizeof(*vuart), GFP_KERNEL); + if (!vuart) + return -ENOMEM; + + vuart->dev = &pdev->dev; + timer_setup(&vuart->unthrottle_timer, aspeed_vuart_unthrottle_exp, 0); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + vuart->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(vuart->regs)) + return PTR_ERR(vuart->regs); + + memset(&port, 0, sizeof(port)); + port.port.private_data = vuart; + port.port.membase = vuart->regs; + port.port.mapbase = res->start; + port.port.mapsize = resource_size(res); + port.port.startup = aspeed_vuart_startup; + port.port.shutdown = aspeed_vuart_shutdown; + port.port.throttle = aspeed_vuart_throttle; + port.port.unthrottle = aspeed_vuart_unthrottle; + port.port.status = UPSTAT_SYNC_FIFO; + port.port.dev = &pdev->dev; + port.port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_8250_CONSOLE); + port.bugs |= UART_BUG_TXRACE; + + rc = sysfs_create_group(&vuart->dev->kobj, &aspeed_vuart_attr_group); + if (rc < 0) + return rc; + + if (of_property_read_u32(np, "clock-frequency", &clk)) { + vuart->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(vuart->clk)) { + dev_warn(&pdev->dev, + "clk or clock-frequency not defined\n"); + rc = PTR_ERR(vuart->clk); + goto err_sysfs_remove; + } + + rc = clk_prepare_enable(vuart->clk); + if (rc < 0) + goto err_sysfs_remove; + + clk = clk_get_rate(vuart->clk); + } + + /* If current-speed was set, then try not to change it. */ + if (of_property_read_u32(np, "current-speed", &prop) == 0) + port.port.custom_divisor = clk / (16 * prop); + + /* Check for shifted address mapping */ + if (of_property_read_u32(np, "reg-offset", &prop) == 0) + port.port.mapbase += prop; + + /* Check for registers offset within the devices address range */ + if (of_property_read_u32(np, "reg-shift", &prop) == 0) + port.port.regshift = prop; + + /* Check for fifo size */ + if (of_property_read_u32(np, "fifo-size", &prop) == 0) + port.port.fifosize = prop; + + /* Check for a fixed line number */ + rc = of_alias_get_id(np, "serial"); + if (rc >= 0) + port.port.line = rc; + + port.port.irq = irq_of_parse_and_map(np, 0); + port.port.handle_irq = aspeed_vuart_handle_irq; + port.port.iotype = UPIO_MEM; + port.port.type = PORT_16550A; + port.port.uartclk = clk; + port.port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF + | UPF_FIXED_PORT | UPF_FIXED_TYPE | UPF_NO_THRE_TEST; + + if (of_property_read_bool(np, "no-loopback-test")) + port.port.flags |= UPF_SKIP_TEST; + + if (port.port.fifosize) + port.capabilities = UART_CAP_FIFO; + + if (of_property_read_bool(np, "auto-flow-control")) + port.capabilities |= UART_CAP_AFE; + + rc = serial8250_register_8250_port(&port); + if (rc < 0) + goto err_clk_disable; + + vuart->line = rc; + + rc = of_parse_phandle_with_fixed_args( + np, "aspeed,sirq-polarity-sense", 2, 0, + &sirq_polarity_sense_args); + if (rc < 0) { + dev_dbg(&pdev->dev, + "aspeed,sirq-polarity-sense property not found\n"); + } else { + aspeed_vuart_auto_configure_sirq_polarity( + vuart, sirq_polarity_sense_args.np, + sirq_polarity_sense_args.args[0], + BIT(sirq_polarity_sense_args.args[1])); + of_node_put(sirq_polarity_sense_args.np); + } + + aspeed_vuart_set_enabled(vuart, true); + aspeed_vuart_set_host_tx_discard(vuart, true); + platform_set_drvdata(pdev, vuart); + + return 0; + +err_clk_disable: + clk_disable_unprepare(vuart->clk); + irq_dispose_mapping(port.port.irq); +err_sysfs_remove: + sysfs_remove_group(&vuart->dev->kobj, &aspeed_vuart_attr_group); + return rc; +} + +static int aspeed_vuart_remove(struct platform_device *pdev) +{ + struct aspeed_vuart *vuart = platform_get_drvdata(pdev); + + del_timer_sync(&vuart->unthrottle_timer); + aspeed_vuart_set_enabled(vuart, false); + serial8250_unregister_port(vuart->line); + sysfs_remove_group(&vuart->dev->kobj, &aspeed_vuart_attr_group); + clk_disable_unprepare(vuart->clk); + + return 0; +} + +static const struct of_device_id aspeed_vuart_table[] = { + { .compatible = "aspeed,ast2400-vuart" }, + { .compatible = "aspeed,ast2500-vuart" }, + { }, +}; + +static struct platform_driver aspeed_vuart_driver = { + .driver = { + .name = "aspeed-vuart", + .of_match_table = aspeed_vuart_table, + }, + .probe = aspeed_vuart_probe, + .remove = aspeed_vuart_remove, +}; + +module_platform_driver(aspeed_vuart_driver); + +MODULE_AUTHOR("Jeremy Kerr "); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Driver for Aspeed VUART device"); diff --git a/drivers/tty/serial/8250/8250_bcm2835aux.c b/drivers/tty/serial/8250/8250_bcm2835aux.c new file mode 100644 index 000000000..fd95860cd --- /dev/null +++ b/drivers/tty/serial/8250/8250_bcm2835aux.c @@ -0,0 +1,212 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Serial port driver for BCM2835AUX UART + * + * Copyright (C) 2016 Martin Sperl + * + * Based on 8250_lpc18xx.c: + * Copyright (C) 2015 Joachim Eastwood + * + * The bcm2835aux is capable of RTS auto flow-control, but this driver doesn't + * take advantage of it yet. When adding support, be sure not to enable it + * simultaneously to rs485. + */ + +#include +#include +#include +#include +#include + +#include "8250.h" + +#define BCM2835_AUX_UART_CNTL 8 +#define BCM2835_AUX_UART_CNTL_RXEN 0x01 /* Receiver enable */ +#define BCM2835_AUX_UART_CNTL_TXEN 0x02 /* Transmitter enable */ +#define BCM2835_AUX_UART_CNTL_AUTORTS 0x04 /* RTS set by RX fill level */ +#define BCM2835_AUX_UART_CNTL_AUTOCTS 0x08 /* CTS stops transmitter */ +#define BCM2835_AUX_UART_CNTL_RTS3 0x00 /* RTS set until 3 chars left */ +#define BCM2835_AUX_UART_CNTL_RTS2 0x10 /* RTS set until 2 chars left */ +#define BCM2835_AUX_UART_CNTL_RTS1 0x20 /* RTS set until 1 chars left */ +#define BCM2835_AUX_UART_CNTL_RTS4 0x30 /* RTS set until 4 chars left */ +#define BCM2835_AUX_UART_CNTL_RTSINV 0x40 /* Invert auto RTS polarity */ +#define BCM2835_AUX_UART_CNTL_CTSINV 0x80 /* Invert auto CTS polarity */ + +/** + * struct bcm2835aux_data - driver private data of BCM2835 auxiliary UART + * @clk: clock producer of the port's uartclk + * @line: index of the port's serial8250_ports[] entry + * @cntl: cached copy of CNTL register + */ +struct bcm2835aux_data { + struct clk *clk; + int line; + u32 cntl; +}; + +static void bcm2835aux_rs485_start_tx(struct uart_8250_port *up) +{ + if (!(up->port.rs485.flags & SER_RS485_RX_DURING_TX)) { + struct bcm2835aux_data *data = dev_get_drvdata(up->port.dev); + + data->cntl &= ~BCM2835_AUX_UART_CNTL_RXEN; + serial_out(up, BCM2835_AUX_UART_CNTL, data->cntl); + } + + /* + * On the bcm2835aux, the MCR register contains no other + * flags besides RTS. So no need for a read-modify-write. + */ + if (up->port.rs485.flags & SER_RS485_RTS_ON_SEND) + serial8250_out_MCR(up, 0); + else + serial8250_out_MCR(up, UART_MCR_RTS); +} + +static void bcm2835aux_rs485_stop_tx(struct uart_8250_port *up) +{ + if (up->port.rs485.flags & SER_RS485_RTS_AFTER_SEND) + serial8250_out_MCR(up, 0); + else + serial8250_out_MCR(up, UART_MCR_RTS); + + if (!(up->port.rs485.flags & SER_RS485_RX_DURING_TX)) { + struct bcm2835aux_data *data = dev_get_drvdata(up->port.dev); + + data->cntl |= BCM2835_AUX_UART_CNTL_RXEN; + serial_out(up, BCM2835_AUX_UART_CNTL, data->cntl); + } +} + +static int bcm2835aux_serial_probe(struct platform_device *pdev) +{ + struct uart_8250_port up = { }; + struct bcm2835aux_data *data; + struct resource *res; + int ret; + + /* allocate the custom structure */ + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + /* initialize data */ + up.capabilities = UART_CAP_FIFO | UART_CAP_MINI; + up.port.dev = &pdev->dev; + up.port.regshift = 2; + up.port.type = PORT_16550; + up.port.iotype = UPIO_MEM; + up.port.fifosize = 8; + up.port.flags = UPF_SHARE_IRQ | UPF_FIXED_PORT | UPF_FIXED_TYPE | + UPF_SKIP_TEST | UPF_IOREMAP; + up.port.rs485_config = serial8250_em485_config; + up.rs485_start_tx = bcm2835aux_rs485_start_tx; + up.rs485_stop_tx = bcm2835aux_rs485_stop_tx; + + /* initialize cached copy with power-on reset value */ + data->cntl = BCM2835_AUX_UART_CNTL_RXEN | BCM2835_AUX_UART_CNTL_TXEN; + + platform_set_drvdata(pdev, data); + + /* get the clock - this also enables the HW */ + data->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(data->clk)) + return dev_err_probe(&pdev->dev, PTR_ERR(data->clk), "could not get clk\n"); + + /* get the interrupt */ + ret = platform_get_irq(pdev, 0); + if (ret < 0) + return ret; + up.port.irq = ret; + + /* map the main registers */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "memory resource not found"); + return -EINVAL; + } + up.port.mapbase = res->start; + up.port.mapsize = resource_size(res); + + /* Check for a fixed line number */ + ret = of_alias_get_id(pdev->dev.of_node, "serial"); + if (ret >= 0) + up.port.line = ret; + + /* enable the clock as a last step */ + ret = clk_prepare_enable(data->clk); + if (ret) { + dev_err(&pdev->dev, "unable to enable uart clock - %d\n", + ret); + return ret; + } + + /* the HW-clock divider for bcm2835aux is 8, + * but 8250 expects a divider of 16, + * so we have to multiply the actual clock by 2 + * to get identical baudrates. + */ + up.port.uartclk = clk_get_rate(data->clk) * 2; + + /* register the port */ + ret = serial8250_register_8250_port(&up); + if (ret < 0) { + dev_err_probe(&pdev->dev, ret, "unable to register 8250 port\n"); + goto dis_clk; + } + data->line = ret; + + return 0; + +dis_clk: + clk_disable_unprepare(data->clk); + return ret; +} + +static int bcm2835aux_serial_remove(struct platform_device *pdev) +{ + struct bcm2835aux_data *data = platform_get_drvdata(pdev); + + serial8250_unregister_port(data->line); + clk_disable_unprepare(data->clk); + + return 0; +} + +static const struct of_device_id bcm2835aux_serial_match[] = { + { .compatible = "brcm,bcm2835-aux-uart" }, + { }, +}; +MODULE_DEVICE_TABLE(of, bcm2835aux_serial_match); + +static struct platform_driver bcm2835aux_serial_driver = { + .driver = { + .name = "bcm2835-aux-uart", + .of_match_table = bcm2835aux_serial_match, + }, + .probe = bcm2835aux_serial_probe, + .remove = bcm2835aux_serial_remove, +}; +module_platform_driver(bcm2835aux_serial_driver); + +#ifdef CONFIG_SERIAL_8250_CONSOLE + +static int __init early_bcm2835aux_setup(struct earlycon_device *device, + const char *options) +{ + if (!device->port.membase) + return -ENODEV; + + device->port.iotype = UPIO_MEM32; + device->port.regshift = 2; + + return early_serial8250_setup(device, NULL); +} + +OF_EARLYCON_DECLARE(bcm2835aux, "brcm,bcm2835-aux-uart", + early_bcm2835aux_setup); +#endif + +MODULE_DESCRIPTION("BCM2835 auxiliar UART driver"); +MODULE_AUTHOR("Martin Sperl "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/8250/8250_boca.c b/drivers/tty/serial/8250/8250_boca.c new file mode 100644 index 000000000..a9b97c034 --- /dev/null +++ b/drivers/tty/serial/8250/8250_boca.c @@ -0,0 +1,49 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2005 Russell King. + * Data taken from include/asm-i386/serial.h + */ +#include +#include +#include + +#include "8250.h" + +static struct plat_serial8250_port boca_data[] = { + SERIAL8250_PORT(0x100, 12), + SERIAL8250_PORT(0x108, 12), + SERIAL8250_PORT(0x110, 12), + SERIAL8250_PORT(0x118, 12), + SERIAL8250_PORT(0x120, 12), + SERIAL8250_PORT(0x128, 12), + SERIAL8250_PORT(0x130, 12), + SERIAL8250_PORT(0x138, 12), + SERIAL8250_PORT(0x140, 12), + SERIAL8250_PORT(0x148, 12), + SERIAL8250_PORT(0x150, 12), + SERIAL8250_PORT(0x158, 12), + SERIAL8250_PORT(0x160, 12), + SERIAL8250_PORT(0x168, 12), + SERIAL8250_PORT(0x170, 12), + SERIAL8250_PORT(0x178, 12), + { }, +}; + +static struct platform_device boca_device = { + .name = "serial8250", + .id = PLAT8250_DEV_BOCA, + .dev = { + .platform_data = boca_data, + }, +}; + +static int __init boca_init(void) +{ + return platform_device_register(&boca_device); +} + +module_init(boca_init); + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("8250 serial probe module for Boca cards"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c new file mode 100644 index 000000000..43f2eed6d --- /dev/null +++ b/drivers/tty/serial/8250/8250_core.c @@ -0,0 +1,1308 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Universal/legacy driver for 8250/16550-type serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright (C) 2001 Russell King. + * + * Supports: ISA-compatible 8250/16550 ports + * PNP 8250/16550 ports + * early_serial_setup() ports + * userspace-configurable "phantom" ports + * "serial8250" platform devices + * serial8250_register_8250_port() ports + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#ifdef CONFIG_SPARC +#include +#endif + +#include + +#include "8250.h" + +/* + * Configuration: + * share_irqs - whether we pass IRQF_SHARED to request_irq(). This option + * is unsafe when used on edge-triggered interrupts. + */ +static unsigned int share_irqs = SERIAL8250_SHARE_IRQS; + +static unsigned int nr_uarts = CONFIG_SERIAL_8250_RUNTIME_UARTS; + +static struct uart_driver serial8250_reg; + +static unsigned int skip_txen_test; /* force skip of txen test at init time */ + +#define PASS_LIMIT 512 + +#include +/* + * SERIAL_PORT_DFNS tells us about built-in ports that have no + * standard enumeration mechanism. Platforms that can find all + * serial ports via mechanisms like ACPI or PCI need not supply it. + */ +#ifndef SERIAL_PORT_DFNS +#define SERIAL_PORT_DFNS +#endif + +static const struct old_serial_port old_serial_port[] = { + SERIAL_PORT_DFNS /* defined in asm/serial.h */ +}; + +#define UART_NR CONFIG_SERIAL_8250_NR_UARTS + +#ifdef CONFIG_SERIAL_8250_RSA + +#define PORT_RSA_MAX 4 +static unsigned long probe_rsa[PORT_RSA_MAX]; +static unsigned int probe_rsa_count; +#endif /* CONFIG_SERIAL_8250_RSA */ + +struct irq_info { + struct hlist_node node; + int irq; + spinlock_t lock; /* Protects list not the hash */ + struct list_head *head; +}; + +#define NR_IRQ_HASH 32 /* Can be adjusted later */ +static struct hlist_head irq_lists[NR_IRQ_HASH]; +static DEFINE_MUTEX(hash_mutex); /* Used to walk the hash */ + +/* + * This is the serial driver's interrupt routine. + * + * Arjan thinks the old way was overly complex, so it got simplified. + * Alan disagrees, saying that need the complexity to handle the weird + * nature of ISA shared interrupts. (This is a special exception.) + * + * In order to handle ISA shared interrupts properly, we need to check + * that all ports have been serviced, and therefore the ISA interrupt + * line has been de-asserted. + * + * This means we need to loop through all ports. checking that they + * don't have an interrupt pending. + */ +static irqreturn_t serial8250_interrupt(int irq, void *dev_id) +{ + struct irq_info *i = dev_id; + struct list_head *l, *end = NULL; + int pass_counter = 0, handled = 0; + + pr_debug("%s(%d): start\n", __func__, irq); + + spin_lock(&i->lock); + + l = i->head; + do { + struct uart_8250_port *up; + struct uart_port *port; + + up = list_entry(l, struct uart_8250_port, list); + port = &up->port; + + if (port->handle_irq(port)) { + handled = 1; + end = NULL; + } else if (end == NULL) + end = l; + + l = l->next; + + if (l == i->head && pass_counter++ > PASS_LIMIT) + break; + } while (l != end); + + spin_unlock(&i->lock); + + pr_debug("%s(%d): end\n", __func__, irq); + + return IRQ_RETVAL(handled); +} + +/* + * To support ISA shared interrupts, we need to have one interrupt + * handler that ensures that the IRQ line has been deasserted + * before returning. Failing to do this will result in the IRQ + * line being stuck active, and, since ISA irqs are edge triggered, + * no more IRQs will be seen. + */ +static void serial_do_unlink(struct irq_info *i, struct uart_8250_port *up) +{ + spin_lock_irq(&i->lock); + + if (!list_empty(i->head)) { + if (i->head == &up->list) + i->head = i->head->next; + list_del(&up->list); + } else { + BUG_ON(i->head != &up->list); + i->head = NULL; + } + spin_unlock_irq(&i->lock); + /* List empty so throw away the hash node */ + if (i->head == NULL) { + hlist_del(&i->node); + kfree(i); + } +} + +static int serial_link_irq_chain(struct uart_8250_port *up) +{ + struct hlist_head *h; + struct hlist_node *n; + struct irq_info *i; + int ret; + + mutex_lock(&hash_mutex); + + h = &irq_lists[up->port.irq % NR_IRQ_HASH]; + + hlist_for_each(n, h) { + i = hlist_entry(n, struct irq_info, node); + if (i->irq == up->port.irq) + break; + } + + if (n == NULL) { + i = kzalloc(sizeof(struct irq_info), GFP_KERNEL); + if (i == NULL) { + mutex_unlock(&hash_mutex); + return -ENOMEM; + } + spin_lock_init(&i->lock); + i->irq = up->port.irq; + hlist_add_head(&i->node, h); + } + mutex_unlock(&hash_mutex); + + spin_lock_irq(&i->lock); + + if (i->head) { + list_add(&up->list, i->head); + spin_unlock_irq(&i->lock); + + ret = 0; + } else { + INIT_LIST_HEAD(&up->list); + i->head = &up->list; + spin_unlock_irq(&i->lock); + ret = request_irq(up->port.irq, serial8250_interrupt, + up->port.irqflags, up->port.name, i); + if (ret < 0) + serial_do_unlink(i, up); + } + + return ret; +} + +static void serial_unlink_irq_chain(struct uart_8250_port *up) +{ + /* + * yes, some broken gcc emit "warning: 'i' may be used uninitialized" + * but no, we are not going to take a patch that assigns NULL below. + */ + struct irq_info *i; + struct hlist_node *n; + struct hlist_head *h; + + mutex_lock(&hash_mutex); + + h = &irq_lists[up->port.irq % NR_IRQ_HASH]; + + hlist_for_each(n, h) { + i = hlist_entry(n, struct irq_info, node); + if (i->irq == up->port.irq) + break; + } + + BUG_ON(n == NULL); + BUG_ON(i->head == NULL); + + if (list_empty(i->head)) + free_irq(up->port.irq, i); + + serial_do_unlink(i, up); + mutex_unlock(&hash_mutex); +} + +/* + * This function is used to handle ports that do not have an + * interrupt. This doesn't work very well for 16450's, but gives + * barely passable results for a 16550A. (Although at the expense + * of much CPU overhead). + */ +static void serial8250_timeout(struct timer_list *t) +{ + struct uart_8250_port *up = from_timer(up, t, timer); + + up->port.handle_irq(&up->port); + mod_timer(&up->timer, jiffies + uart_poll_timeout(&up->port)); +} + +static void serial8250_backup_timeout(struct timer_list *t) +{ + struct uart_8250_port *up = from_timer(up, t, timer); + unsigned int iir, ier = 0, lsr; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + + /* + * Must disable interrupts or else we risk racing with the interrupt + * based handler. + */ + if (up->port.irq) { + ier = serial_in(up, UART_IER); + serial_out(up, UART_IER, 0); + } + + iir = serial_in(up, UART_IIR); + + /* + * This should be a safe test for anyone who doesn't trust the + * IIR bits on their UART, but it's specifically designed for + * the "Diva" UART used on the management processor on many HP + * ia64 and parisc boxes. + */ + lsr = serial_in(up, UART_LSR); + up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; + if ((iir & UART_IIR_NO_INT) && (up->ier & UART_IER_THRI) && + (!uart_circ_empty(&up->port.state->xmit) || up->port.x_char) && + (lsr & UART_LSR_THRE)) { + iir &= ~(UART_IIR_ID | UART_IIR_NO_INT); + iir |= UART_IIR_THRI; + } + + if (!(iir & UART_IIR_NO_INT)) + serial8250_tx_chars(up); + + if (up->port.irq) + serial_out(up, UART_IER, ier); + + spin_unlock_irqrestore(&up->port.lock, flags); + + /* Standard timer interval plus 0.2s to keep the port running */ + mod_timer(&up->timer, + jiffies + uart_poll_timeout(&up->port) + HZ / 5); +} + +static void univ8250_setup_timer(struct uart_8250_port *up) +{ + struct uart_port *port = &up->port; + + /* + * The above check will only give an accurate result the first time + * the port is opened so this value needs to be preserved. + */ + if (up->bugs & UART_BUG_THRE) { + pr_debug("%s - using backup timer\n", port->name); + + up->timer.function = serial8250_backup_timeout; + mod_timer(&up->timer, jiffies + + uart_poll_timeout(port) + HZ / 5); + } + + /* + * If the "interrupt" for this port doesn't correspond with any + * hardware interrupt, we use a timer-based system. The original + * driver used to do this with IRQ0. + */ + if (!port->irq) + mod_timer(&up->timer, jiffies + uart_poll_timeout(port)); +} + +static int univ8250_setup_irq(struct uart_8250_port *up) +{ + struct uart_port *port = &up->port; + + if (port->irq) + return serial_link_irq_chain(up); + + return 0; +} + +static void univ8250_release_irq(struct uart_8250_port *up) +{ + struct uart_port *port = &up->port; + + del_timer_sync(&up->timer); + up->timer.function = serial8250_timeout; + if (port->irq) + serial_unlink_irq_chain(up); +} + +#ifdef CONFIG_SERIAL_8250_RSA +static int serial8250_request_rsa_resource(struct uart_8250_port *up) +{ + unsigned long start = UART_RSA_BASE << up->port.regshift; + unsigned int size = 8 << up->port.regshift; + struct uart_port *port = &up->port; + int ret = -EINVAL; + + switch (port->iotype) { + case UPIO_HUB6: + case UPIO_PORT: + start += port->iobase; + if (request_region(start, size, "serial-rsa")) + ret = 0; + else + ret = -EBUSY; + break; + } + + return ret; +} + +static void serial8250_release_rsa_resource(struct uart_8250_port *up) +{ + unsigned long offset = UART_RSA_BASE << up->port.regshift; + unsigned int size = 8 << up->port.regshift; + struct uart_port *port = &up->port; + + switch (port->iotype) { + case UPIO_HUB6: + case UPIO_PORT: + release_region(port->iobase + offset, size); + break; + } +} +#endif + +static const struct uart_ops *base_ops; +static struct uart_ops univ8250_port_ops; + +static const struct uart_8250_ops univ8250_driver_ops = { + .setup_irq = univ8250_setup_irq, + .release_irq = univ8250_release_irq, + .setup_timer = univ8250_setup_timer, +}; + +static struct uart_8250_port serial8250_ports[UART_NR]; + +/** + * serial8250_get_port - retrieve struct uart_8250_port + * @line: serial line number + * + * This function retrieves struct uart_8250_port for the specific line. + * This struct *must* *not* be used to perform a 8250 or serial core operation + * which is not accessible otherwise. Its only purpose is to make the struct + * accessible to the runtime-pm callbacks for context suspend/restore. + * The lock assumption made here is none because runtime-pm suspend/resume + * callbacks should not be invoked if there is any operation performed on the + * port. + */ +struct uart_8250_port *serial8250_get_port(int line) +{ + return &serial8250_ports[line]; +} +EXPORT_SYMBOL_GPL(serial8250_get_port); + +static void (*serial8250_isa_config)(int port, struct uart_port *up, + u32 *capabilities); + +void serial8250_set_isa_configurator( + void (*v)(int port, struct uart_port *up, u32 *capabilities)) +{ + serial8250_isa_config = v; +} +EXPORT_SYMBOL(serial8250_set_isa_configurator); + +#ifdef CONFIG_SERIAL_8250_RSA + +static void univ8250_config_port(struct uart_port *port, int flags) +{ + struct uart_8250_port *up = up_to_u8250p(port); + + up->probe &= ~UART_PROBE_RSA; + if (port->type == PORT_RSA) { + if (serial8250_request_rsa_resource(up) == 0) + up->probe |= UART_PROBE_RSA; + } else if (flags & UART_CONFIG_TYPE) { + int i; + + for (i = 0; i < probe_rsa_count; i++) { + if (probe_rsa[i] == up->port.iobase) { + if (serial8250_request_rsa_resource(up) == 0) + up->probe |= UART_PROBE_RSA; + break; + } + } + } + + base_ops->config_port(port, flags); + + if (port->type != PORT_RSA && up->probe & UART_PROBE_RSA) + serial8250_release_rsa_resource(up); +} + +static int univ8250_request_port(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + int ret; + + ret = base_ops->request_port(port); + if (ret == 0 && port->type == PORT_RSA) { + ret = serial8250_request_rsa_resource(up); + if (ret < 0) + base_ops->release_port(port); + } + + return ret; +} + +static void univ8250_release_port(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + + if (port->type == PORT_RSA) + serial8250_release_rsa_resource(up); + base_ops->release_port(port); +} + +static void univ8250_rsa_support(struct uart_ops *ops) +{ + ops->config_port = univ8250_config_port; + ops->request_port = univ8250_request_port; + ops->release_port = univ8250_release_port; +} + +#else +#define univ8250_rsa_support(x) do { } while (0) +#endif /* CONFIG_SERIAL_8250_RSA */ + +static inline void serial8250_apply_quirks(struct uart_8250_port *up) +{ + up->port.quirks |= skip_txen_test ? UPQ_NO_TXEN_TEST : 0; +} + +static void __init serial8250_isa_init_ports(void) +{ + struct uart_8250_port *up; + static int first = 1; + int i, irqflag = 0; + + if (!first) + return; + first = 0; + + if (nr_uarts > UART_NR) + nr_uarts = UART_NR; + + for (i = 0; i < nr_uarts; i++) { + struct uart_8250_port *up = &serial8250_ports[i]; + struct uart_port *port = &up->port; + + port->line = i; + serial8250_init_port(up); + if (!base_ops) + base_ops = port->ops; + port->ops = &univ8250_port_ops; + + timer_setup(&up->timer, serial8250_timeout, 0); + + up->ops = &univ8250_driver_ops; + + /* + * ALPHA_KLUDGE_MCR needs to be killed. + */ + up->mcr_mask = ~ALPHA_KLUDGE_MCR; + up->mcr_force = ALPHA_KLUDGE_MCR; + serial8250_set_defaults(up); + } + + /* chain base port ops to support Remote Supervisor Adapter */ + univ8250_port_ops = *base_ops; + univ8250_rsa_support(&univ8250_port_ops); + + if (share_irqs) + irqflag = IRQF_SHARED; + + for (i = 0, up = serial8250_ports; + i < ARRAY_SIZE(old_serial_port) && i < nr_uarts; + i++, up++) { + struct uart_port *port = &up->port; + + port->iobase = old_serial_port[i].port; + port->irq = irq_canonicalize(old_serial_port[i].irq); + port->irqflags = 0; + port->uartclk = old_serial_port[i].baud_base * 16; + port->flags = old_serial_port[i].flags; + port->hub6 = 0; + port->membase = old_serial_port[i].iomem_base; + port->iotype = old_serial_port[i].io_type; + port->regshift = old_serial_port[i].iomem_reg_shift; + + port->irqflags |= irqflag; + if (serial8250_isa_config != NULL) + serial8250_isa_config(i, &up->port, &up->capabilities); + } +} + +static void __init +serial8250_register_ports(struct uart_driver *drv, struct device *dev) +{ + int i; + + for (i = 0; i < nr_uarts; i++) { + struct uart_8250_port *up = &serial8250_ports[i]; + + if (up->port.type == PORT_8250_CIR) + continue; + + if (up->port.dev) + continue; + + up->port.dev = dev; + + if (uart_console_enabled(&up->port)) + pm_runtime_get_sync(up->port.dev); + + serial8250_apply_quirks(up); + uart_add_one_port(drv, &up->port); + } +} + +#ifdef CONFIG_SERIAL_8250_CONSOLE + +static void univ8250_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_8250_port *up = &serial8250_ports[co->index]; + + serial8250_console_write(up, s, count); +} + +static int univ8250_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int retval; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= nr_uarts) + co->index = 0; + port = &serial8250_ports[co->index].port; + /* link port to console */ + port->cons = co; + + retval = serial8250_console_setup(port, options, false); + if (retval != 0) + port->cons = NULL; + return retval; +} + +static int univ8250_console_exit(struct console *co) +{ + struct uart_port *port; + + port = &serial8250_ports[co->index].port; + return serial8250_console_exit(port); +} + +/** + * univ8250_console_match - non-standard console matching + * @co: registering console + * @name: name from console command line + * @idx: index from console command line + * @options: ptr to option string from console command line + * + * Only attempts to match console command lines of the form: + * console=uart[8250],io|mmio|mmio16|mmio32,[,] + * console=uart[8250],0x[,] + * This form is used to register an initial earlycon boot console and + * replace it with the serial8250_console at 8250 driver init. + * + * Performs console setup for a match (as required by interface) + * If no are specified, then assume the h/w is already setup. + * + * Returns 0 if console matches; otherwise non-zero to use default matching + */ +static int univ8250_console_match(struct console *co, char *name, int idx, + char *options) +{ + char match[] = "uart"; /* 8250-specific earlycon name */ + unsigned char iotype; + resource_size_t addr; + int i; + + if (strncmp(name, match, 4) != 0) + return -ENODEV; + + if (uart_parse_earlycon(options, &iotype, &addr, &options)) + return -ENODEV; + + /* try to match the port specified on the command line */ + for (i = 0; i < nr_uarts; i++) { + struct uart_port *port = &serial8250_ports[i].port; + + if (port->iotype != iotype) + continue; + if ((iotype == UPIO_MEM || iotype == UPIO_MEM16 || + iotype == UPIO_MEM32 || iotype == UPIO_MEM32BE) + && (port->mapbase != addr)) + continue; + if (iotype == UPIO_PORT && port->iobase != addr) + continue; + + co->index = i; + port->cons = co; + return serial8250_console_setup(port, options, true); + } + + return -ENODEV; +} + +static struct console univ8250_console = { + .name = "ttyS", + .write = univ8250_console_write, + .device = uart_console_device, + .setup = univ8250_console_setup, + .exit = univ8250_console_exit, + .match = univ8250_console_match, + .flags = CON_PRINTBUFFER | CON_ANYTIME, + .index = -1, + .data = &serial8250_reg, +}; + +static int __init univ8250_console_init(void) +{ + if (nr_uarts == 0) + return -ENODEV; + + serial8250_isa_init_ports(); + register_console(&univ8250_console); + return 0; +} +console_initcall(univ8250_console_init); + +#define SERIAL8250_CONSOLE (&univ8250_console) +#else +#define SERIAL8250_CONSOLE NULL +#endif + +static struct uart_driver serial8250_reg = { + .owner = THIS_MODULE, + .driver_name = "serial", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .cons = SERIAL8250_CONSOLE, +}; + +/* + * early_serial_setup - early registration for 8250 ports + * + * Setup an 8250 port structure prior to console initialisation. Use + * after console initialisation will cause undefined behaviour. + */ +int __init early_serial_setup(struct uart_port *port) +{ + struct uart_port *p; + + if (port->line >= ARRAY_SIZE(serial8250_ports) || nr_uarts == 0) + return -ENODEV; + + serial8250_isa_init_ports(); + p = &serial8250_ports[port->line].port; + p->iobase = port->iobase; + p->membase = port->membase; + p->irq = port->irq; + p->irqflags = port->irqflags; + p->uartclk = port->uartclk; + p->fifosize = port->fifosize; + p->regshift = port->regshift; + p->iotype = port->iotype; + p->flags = port->flags; + p->mapbase = port->mapbase; + p->mapsize = port->mapsize; + p->private_data = port->private_data; + p->type = port->type; + p->line = port->line; + + serial8250_set_defaults(up_to_u8250p(p)); + + if (port->serial_in) + p->serial_in = port->serial_in; + if (port->serial_out) + p->serial_out = port->serial_out; + if (port->handle_irq) + p->handle_irq = port->handle_irq; + + return 0; +} + +/** + * serial8250_suspend_port - suspend one serial port + * @line: serial line number + * + * Suspend one serial port. + */ +void serial8250_suspend_port(int line) +{ + struct uart_8250_port *up = &serial8250_ports[line]; + struct uart_port *port = &up->port; + + if (!console_suspend_enabled && uart_console(port) && + port->type != PORT_8250) { + unsigned char canary = 0xa5; + + serial_out(up, UART_SCR, canary); + if (serial_in(up, UART_SCR) == canary) + up->canary = canary; + } + + uart_suspend_port(&serial8250_reg, port); +} +EXPORT_SYMBOL(serial8250_suspend_port); + +/** + * serial8250_resume_port - resume one serial port + * @line: serial line number + * + * Resume one serial port. + */ +void serial8250_resume_port(int line) +{ + struct uart_8250_port *up = &serial8250_ports[line]; + struct uart_port *port = &up->port; + + up->canary = 0; + + if (up->capabilities & UART_NATSEMI) { + /* Ensure it's still in high speed mode */ + serial_port_out(port, UART_LCR, 0xE0); + + ns16550a_goto_highspeed(up); + + serial_port_out(port, UART_LCR, 0); + port->uartclk = 921600*16; + } + uart_resume_port(&serial8250_reg, port); +} +EXPORT_SYMBOL(serial8250_resume_port); + +/* + * Register a set of serial devices attached to a platform device. The + * list is terminated with a zero flags entry, which means we expect + * all entries to have at least UPF_BOOT_AUTOCONF set. + */ +static int serial8250_probe(struct platform_device *dev) +{ + struct plat_serial8250_port *p = dev_get_platdata(&dev->dev); + struct uart_8250_port uart; + int ret, i, irqflag = 0; + + memset(&uart, 0, sizeof(uart)); + + if (share_irqs) + irqflag = IRQF_SHARED; + + for (i = 0; p && p->flags != 0; p++, i++) { + uart.port.iobase = p->iobase; + uart.port.membase = p->membase; + uart.port.irq = p->irq; + uart.port.irqflags = p->irqflags; + uart.port.uartclk = p->uartclk; + uart.port.regshift = p->regshift; + uart.port.iotype = p->iotype; + uart.port.flags = p->flags; + uart.port.mapbase = p->mapbase; + uart.port.hub6 = p->hub6; + uart.port.has_sysrq = p->has_sysrq; + uart.port.private_data = p->private_data; + uart.port.type = p->type; + uart.port.serial_in = p->serial_in; + uart.port.serial_out = p->serial_out; + uart.port.handle_irq = p->handle_irq; + uart.port.handle_break = p->handle_break; + uart.port.set_termios = p->set_termios; + uart.port.set_ldisc = p->set_ldisc; + uart.port.get_mctrl = p->get_mctrl; + uart.port.pm = p->pm; + uart.port.dev = &dev->dev; + uart.port.irqflags |= irqflag; + ret = serial8250_register_8250_port(&uart); + if (ret < 0) { + dev_err(&dev->dev, "unable to register port at index %d " + "(IO%lx MEM%llx IRQ%d): %d\n", i, + p->iobase, (unsigned long long)p->mapbase, + p->irq, ret); + } + } + return 0; +} + +/* + * Remove serial ports registered against a platform device. + */ +static int serial8250_remove(struct platform_device *dev) +{ + int i; + + for (i = 0; i < nr_uarts; i++) { + struct uart_8250_port *up = &serial8250_ports[i]; + + if (up->port.dev == &dev->dev) + serial8250_unregister_port(i); + } + return 0; +} + +static int serial8250_suspend(struct platform_device *dev, pm_message_t state) +{ + int i; + + for (i = 0; i < UART_NR; i++) { + struct uart_8250_port *up = &serial8250_ports[i]; + + if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) + uart_suspend_port(&serial8250_reg, &up->port); + } + + return 0; +} + +static int serial8250_resume(struct platform_device *dev) +{ + int i; + + for (i = 0; i < UART_NR; i++) { + struct uart_8250_port *up = &serial8250_ports[i]; + + if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) + serial8250_resume_port(i); + } + + return 0; +} + +static struct platform_driver serial8250_isa_driver = { + .probe = serial8250_probe, + .remove = serial8250_remove, + .suspend = serial8250_suspend, + .resume = serial8250_resume, + .driver = { + .name = "serial8250", + }, +}; + +/* + * This "device" covers _all_ ISA 8250-compatible serial devices listed + * in the table in include/asm/serial.h + */ +static struct platform_device *serial8250_isa_devs; + +/* + * serial8250_register_8250_port and serial8250_unregister_port allows for + * 16x50 serial ports to be configured at run-time, to support PCMCIA + * modems and PCI multiport cards. + */ +static DEFINE_MUTEX(serial_mutex); + +static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *port) +{ + int i; + + /* + * First, find a port entry which matches. + */ + for (i = 0; i < nr_uarts; i++) + if (uart_match_port(&serial8250_ports[i].port, port)) + return &serial8250_ports[i]; + + /* try line number first if still available */ + i = port->line; + if (i < nr_uarts && serial8250_ports[i].port.type == PORT_UNKNOWN && + serial8250_ports[i].port.iobase == 0) + return &serial8250_ports[i]; + /* + * We didn't find a matching entry, so look for the first + * free entry. We look for one which hasn't been previously + * used (indicated by zero iobase). + */ + for (i = 0; i < nr_uarts; i++) + if (serial8250_ports[i].port.type == PORT_UNKNOWN && + serial8250_ports[i].port.iobase == 0) + return &serial8250_ports[i]; + + /* + * That also failed. Last resort is to find any entry which + * doesn't have a real port associated with it. + */ + for (i = 0; i < nr_uarts; i++) + if (serial8250_ports[i].port.type == PORT_UNKNOWN) + return &serial8250_ports[i]; + + return NULL; +} + +static void serial_8250_overrun_backoff_work(struct work_struct *work) +{ + struct uart_8250_port *up = + container_of(to_delayed_work(work), struct uart_8250_port, + overrun_backoff); + struct uart_port *port = &up->port; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + up->ier |= UART_IER_RLSI | UART_IER_RDI; + up->port.read_status_mask |= UART_LSR_DR; + serial_out(up, UART_IER, up->ier); + spin_unlock_irqrestore(&port->lock, flags); +} + +/** + * serial8250_register_8250_port - register a serial port + * @up: serial port template + * + * Configure the serial port specified by the request. If the + * port exists and is in use, it is hung up and unregistered + * first. + * + * The port is then probed and if necessary the IRQ is autodetected + * If this fails an error is returned. + * + * On success the port is ready to use and the line number is returned. + */ +int serial8250_register_8250_port(struct uart_8250_port *up) +{ + struct uart_8250_port *uart; + int ret = -ENOSPC; + + if (up->port.uartclk == 0) + return -EINVAL; + + mutex_lock(&serial_mutex); + + uart = serial8250_find_match_or_unused(&up->port); + if (uart && uart->port.type != PORT_8250_CIR) { + struct mctrl_gpios *gpios; + + if (uart->port.dev) + uart_remove_one_port(&serial8250_reg, &uart->port); + + uart->port.iobase = up->port.iobase; + uart->port.membase = up->port.membase; + uart->port.irq = up->port.irq; + uart->port.irqflags = up->port.irqflags; + uart->port.uartclk = up->port.uartclk; + uart->port.fifosize = up->port.fifosize; + uart->port.regshift = up->port.regshift; + uart->port.iotype = up->port.iotype; + uart->port.flags = up->port.flags | UPF_BOOT_AUTOCONF; + uart->bugs = up->bugs; + uart->port.mapbase = up->port.mapbase; + uart->port.mapsize = up->port.mapsize; + uart->port.private_data = up->port.private_data; + uart->tx_loadsz = up->tx_loadsz; + uart->capabilities = up->capabilities; + uart->port.throttle = up->port.throttle; + uart->port.unthrottle = up->port.unthrottle; + uart->port.rs485_config = up->port.rs485_config; + uart->port.rs485 = up->port.rs485; + uart->rs485_start_tx = up->rs485_start_tx; + uart->rs485_stop_tx = up->rs485_stop_tx; + uart->dma = up->dma; + + /* Take tx_loadsz from fifosize if it wasn't set separately */ + if (uart->port.fifosize && !uart->tx_loadsz) + uart->tx_loadsz = uart->port.fifosize; + + if (up->port.dev) { + uart->port.dev = up->port.dev; + ret = uart_get_rs485_mode(&uart->port); + if (ret) + goto err; + } + + if (up->port.flags & UPF_FIXED_TYPE) + uart->port.type = up->port.type; + + /* + * Only call mctrl_gpio_init(), if the device has no ACPI + * companion device + */ + if (!has_acpi_companion(uart->port.dev)) { + gpios = mctrl_gpio_init(&uart->port, 0); + if (IS_ERR(gpios)) { + ret = PTR_ERR(gpios); + goto err; + } else { + uart->gpios = gpios; + } + } + + serial8250_set_defaults(uart); + + /* Possibly override default I/O functions. */ + if (up->port.serial_in) + uart->port.serial_in = up->port.serial_in; + if (up->port.serial_out) + uart->port.serial_out = up->port.serial_out; + if (up->port.handle_irq) + uart->port.handle_irq = up->port.handle_irq; + /* Possibly override set_termios call */ + if (up->port.set_termios) + uart->port.set_termios = up->port.set_termios; + if (up->port.set_ldisc) + uart->port.set_ldisc = up->port.set_ldisc; + if (up->port.get_mctrl) + uart->port.get_mctrl = up->port.get_mctrl; + if (up->port.set_mctrl) + uart->port.set_mctrl = up->port.set_mctrl; + if (up->port.get_divisor) + uart->port.get_divisor = up->port.get_divisor; + if (up->port.set_divisor) + uart->port.set_divisor = up->port.set_divisor; + if (up->port.startup) + uart->port.startup = up->port.startup; + if (up->port.shutdown) + uart->port.shutdown = up->port.shutdown; + if (up->port.pm) + uart->port.pm = up->port.pm; + if (up->port.handle_break) + uart->port.handle_break = up->port.handle_break; + if (up->dl_read) + uart->dl_read = up->dl_read; + if (up->dl_write) + uart->dl_write = up->dl_write; + + if (uart->port.type != PORT_8250_CIR) { + if (serial8250_isa_config != NULL) + serial8250_isa_config(0, &uart->port, + &uart->capabilities); + + serial8250_apply_quirks(uart); + ret = uart_add_one_port(&serial8250_reg, + &uart->port); + if (ret) + goto err; + + ret = uart->port.line; + } else { + dev_info(uart->port.dev, + "skipping CIR port at 0x%lx / 0x%llx, IRQ %d\n", + uart->port.iobase, + (unsigned long long)uart->port.mapbase, + uart->port.irq); + + ret = 0; + } + + /* Initialise interrupt backoff work if required */ + if (up->overrun_backoff_time_ms > 0) { + uart->overrun_backoff_time_ms = + up->overrun_backoff_time_ms; + INIT_DELAYED_WORK(&uart->overrun_backoff, + serial_8250_overrun_backoff_work); + } else { + uart->overrun_backoff_time_ms = 0; + } + } + + mutex_unlock(&serial_mutex); + + return ret; + +err: + uart->port.dev = NULL; + mutex_unlock(&serial_mutex); + return ret; +} +EXPORT_SYMBOL(serial8250_register_8250_port); + +/** + * serial8250_unregister_port - remove a 16x50 serial port at runtime + * @line: serial line number + * + * Remove one serial port. This may not be called from interrupt + * context. We hand the port back to the our control. + */ +void serial8250_unregister_port(int line) +{ + struct uart_8250_port *uart = &serial8250_ports[line]; + + mutex_lock(&serial_mutex); + + if (uart->em485) { + unsigned long flags; + + spin_lock_irqsave(&uart->port.lock, flags); + serial8250_em485_destroy(uart); + spin_unlock_irqrestore(&uart->port.lock, flags); + } + + uart_remove_one_port(&serial8250_reg, &uart->port); + if (serial8250_isa_devs) { + uart->port.flags &= ~UPF_BOOT_AUTOCONF; + uart->port.type = PORT_UNKNOWN; + uart->port.dev = &serial8250_isa_devs->dev; + uart->capabilities = 0; + serial8250_init_port(uart); + serial8250_apply_quirks(uart); + uart_add_one_port(&serial8250_reg, &uart->port); + } else { + uart->port.dev = NULL; + } + mutex_unlock(&serial_mutex); +} +EXPORT_SYMBOL(serial8250_unregister_port); + +static int __init serial8250_init(void) +{ + int ret; + + if (nr_uarts == 0) + return -ENODEV; + + serial8250_isa_init_ports(); + + pr_info("Serial: 8250/16550 driver, %d ports, IRQ sharing %sabled\n", + nr_uarts, share_irqs ? "en" : "dis"); + +#ifdef CONFIG_SPARC + ret = sunserial_register_minors(&serial8250_reg, UART_NR); +#else + serial8250_reg.nr = UART_NR; + ret = uart_register_driver(&serial8250_reg); +#endif + if (ret) + goto out; + + ret = serial8250_pnp_init(); + if (ret) + goto unreg_uart_drv; + + serial8250_isa_devs = platform_device_alloc("serial8250", + PLAT8250_DEV_LEGACY); + if (!serial8250_isa_devs) { + ret = -ENOMEM; + goto unreg_pnp; + } + + ret = platform_device_add(serial8250_isa_devs); + if (ret) + goto put_dev; + + serial8250_register_ports(&serial8250_reg, &serial8250_isa_devs->dev); + + ret = platform_driver_register(&serial8250_isa_driver); + if (ret == 0) + goto out; + + platform_device_del(serial8250_isa_devs); +put_dev: + platform_device_put(serial8250_isa_devs); +unreg_pnp: + serial8250_pnp_exit(); +unreg_uart_drv: +#ifdef CONFIG_SPARC + sunserial_unregister_minors(&serial8250_reg, UART_NR); +#else + uart_unregister_driver(&serial8250_reg); +#endif +out: + return ret; +} + +static void __exit serial8250_exit(void) +{ + struct platform_device *isa_dev = serial8250_isa_devs; + + /* + * This tells serial8250_unregister_port() not to re-register + * the ports (thereby making serial8250_isa_driver permanently + * in use.) + */ + serial8250_isa_devs = NULL; + + platform_driver_unregister(&serial8250_isa_driver); + platform_device_unregister(isa_dev); + + serial8250_pnp_exit(); + +#ifdef CONFIG_SPARC + sunserial_unregister_minors(&serial8250_reg, UART_NR); +#else + uart_unregister_driver(&serial8250_reg); +#endif +} + +module_init(serial8250_init); +module_exit(serial8250_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Generic 8250/16x50 serial driver"); + +module_param_hw(share_irqs, uint, other, 0644); +MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices (unsafe)"); + +module_param(nr_uarts, uint, 0644); +MODULE_PARM_DESC(nr_uarts, "Maximum number of UARTs supported. (1-" __MODULE_STRING(CONFIG_SERIAL_8250_NR_UARTS) ")"); + +module_param(skip_txen_test, uint, 0644); +MODULE_PARM_DESC(skip_txen_test, "Skip checking for the TXEN bug at init time"); + +#ifdef CONFIG_SERIAL_8250_RSA +module_param_hw_array(probe_rsa, ulong, ioport, &probe_rsa_count, 0444); +MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA"); +#endif +MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR); + +#ifdef CONFIG_SERIAL_8250_DEPRECATED_OPTIONS +#ifndef MODULE +/* This module was renamed to 8250_core in 3.7. Keep the old "8250" name + * working as well for the module options so we don't break people. We + * need to keep the names identical and the convenient macros will happily + * refuse to let us do that by failing the build with redefinition errors + * of global variables. So we stick them inside a dummy function to avoid + * those conflicts. The options still get parsed, and the redefined + * MODULE_PARAM_PREFIX lets us keep the "8250." syntax alive. + * + * This is hacky. I'm sorry. + */ +static void __used s8250_options(void) +{ +#undef MODULE_PARAM_PREFIX +#define MODULE_PARAM_PREFIX "8250_core." + + module_param_cb(share_irqs, ¶m_ops_uint, &share_irqs, 0644); + module_param_cb(nr_uarts, ¶m_ops_uint, &nr_uarts, 0644); + module_param_cb(skip_txen_test, ¶m_ops_uint, &skip_txen_test, 0644); +#ifdef CONFIG_SERIAL_8250_RSA + __module_param_call(MODULE_PARAM_PREFIX, probe_rsa, + ¶m_array_ops, .arr = &__param_arr_probe_rsa, + 0444, -1, 0); +#endif +} +#else +MODULE_ALIAS("8250_core"); +#endif +#endif diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c new file mode 100644 index 000000000..33ce4b218 --- /dev/null +++ b/drivers/tty/serial/8250/8250_dma.c @@ -0,0 +1,295 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * 8250_dma.c - DMA Engine API support for 8250.c + * + * Copyright (C) 2013 Intel Corporation + */ +#include +#include +#include +#include + +#include "8250.h" + +static void __dma_tx_complete(void *param) +{ + struct uart_8250_port *p = param; + struct uart_8250_dma *dma = p->dma; + struct circ_buf *xmit = &p->port.state->xmit; + unsigned long flags; + int ret; + + dma_sync_single_for_cpu(dma->txchan->device->dev, dma->tx_addr, + UART_XMIT_SIZE, DMA_TO_DEVICE); + + spin_lock_irqsave(&p->port.lock, flags); + + dma->tx_running = 0; + + xmit->tail += dma->tx_size; + xmit->tail &= UART_XMIT_SIZE - 1; + p->port.icount.tx += dma->tx_size; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&p->port); + + ret = serial8250_tx_dma(p); + if (ret) + serial8250_set_THRI(p); + + spin_unlock_irqrestore(&p->port.lock, flags); +} + +static void __dma_rx_complete(void *param) +{ + struct uart_8250_port *p = param; + struct uart_8250_dma *dma = p->dma; + struct tty_port *tty_port = &p->port.state->port; + struct dma_tx_state state; + enum dma_status dma_status; + int count; + + /* + * New DMA Rx can be started during the completion handler before it + * could acquire port's lock and it might still be ongoing. Don't to + * anything in such case. + */ + dma_status = dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state); + if (dma_status == DMA_IN_PROGRESS) + return; + + count = dma->rx_size - state.residue; + + tty_insert_flip_string(tty_port, dma->rx_buf, count); + p->port.icount.rx += count; + dma->rx_running = 0; + + tty_flip_buffer_push(tty_port); +} + +static void dma_rx_complete(void *param) +{ + struct uart_8250_port *p = param; + struct uart_8250_dma *dma = p->dma; + unsigned long flags; + + spin_lock_irqsave(&p->port.lock, flags); + if (dma->rx_running) + __dma_rx_complete(p); + spin_unlock_irqrestore(&p->port.lock, flags); +} + +int serial8250_tx_dma(struct uart_8250_port *p) +{ + struct uart_8250_dma *dma = p->dma; + struct circ_buf *xmit = &p->port.state->xmit; + struct dma_async_tx_descriptor *desc; + struct uart_port *up = &p->port; + int ret; + + if (dma->tx_running) { + if (up->x_char) { + dmaengine_pause(dma->txchan); + uart_xchar_out(up, UART_TX); + dmaengine_resume(dma->txchan); + } + return 0; + } else if (up->x_char) { + uart_xchar_out(up, UART_TX); + } + + if (uart_tx_stopped(&p->port) || uart_circ_empty(xmit)) { + /* We have been called from __dma_tx_complete() */ + serial8250_rpm_put_tx(p); + return 0; + } + + dma->tx_size = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); + + desc = dmaengine_prep_slave_single(dma->txchan, + dma->tx_addr + xmit->tail, + dma->tx_size, DMA_MEM_TO_DEV, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) { + ret = -EBUSY; + goto err; + } + + dma->tx_running = 1; + desc->callback = __dma_tx_complete; + desc->callback_param = p; + + dma->tx_cookie = dmaengine_submit(desc); + + dma_sync_single_for_device(dma->txchan->device->dev, dma->tx_addr, + UART_XMIT_SIZE, DMA_TO_DEVICE); + + dma_async_issue_pending(dma->txchan); + if (dma->tx_err) { + dma->tx_err = 0; + serial8250_clear_THRI(p); + } + return 0; +err: + dma->tx_err = 1; + return ret; +} + +int serial8250_rx_dma(struct uart_8250_port *p) +{ + struct uart_8250_dma *dma = p->dma; + struct dma_async_tx_descriptor *desc; + + if (dma->rx_running) + return 0; + + desc = dmaengine_prep_slave_single(dma->rxchan, dma->rx_addr, + dma->rx_size, DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) + return -EBUSY; + + dma->rx_running = 1; + desc->callback = dma_rx_complete; + desc->callback_param = p; + + dma->rx_cookie = dmaengine_submit(desc); + + dma_async_issue_pending(dma->rxchan); + + return 0; +} + +void serial8250_rx_dma_flush(struct uart_8250_port *p) +{ + struct uart_8250_dma *dma = p->dma; + + if (dma->rx_running) { + dmaengine_pause(dma->rxchan); + __dma_rx_complete(p); + dmaengine_terminate_async(dma->rxchan); + } +} +EXPORT_SYMBOL_GPL(serial8250_rx_dma_flush); + +int serial8250_request_dma(struct uart_8250_port *p) +{ + struct uart_8250_dma *dma = p->dma; + phys_addr_t rx_dma_addr = dma->rx_dma_addr ? + dma->rx_dma_addr : p->port.mapbase; + phys_addr_t tx_dma_addr = dma->tx_dma_addr ? + dma->tx_dma_addr : p->port.mapbase; + dma_cap_mask_t mask; + struct dma_slave_caps caps; + int ret; + + /* Default slave configuration parameters */ + dma->rxconf.direction = DMA_DEV_TO_MEM; + dma->rxconf.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + dma->rxconf.src_addr = rx_dma_addr + UART_RX; + + dma->txconf.direction = DMA_MEM_TO_DEV; + dma->txconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + dma->txconf.dst_addr = tx_dma_addr + UART_TX; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + /* Get a channel for RX */ + dma->rxchan = dma_request_slave_channel_compat(mask, + dma->fn, dma->rx_param, + p->port.dev, "rx"); + if (!dma->rxchan) + return -ENODEV; + + /* 8250 rx dma requires dmaengine driver to support pause/terminate */ + ret = dma_get_slave_caps(dma->rxchan, &caps); + if (ret) + goto release_rx; + if (!caps.cmd_pause || !caps.cmd_terminate || + caps.residue_granularity == DMA_RESIDUE_GRANULARITY_DESCRIPTOR) { + ret = -EINVAL; + goto release_rx; + } + + dmaengine_slave_config(dma->rxchan, &dma->rxconf); + + /* Get a channel for TX */ + dma->txchan = dma_request_slave_channel_compat(mask, + dma->fn, dma->tx_param, + p->port.dev, "tx"); + if (!dma->txchan) { + ret = -ENODEV; + goto release_rx; + } + + /* 8250 tx dma requires dmaengine driver to support terminate */ + ret = dma_get_slave_caps(dma->txchan, &caps); + if (ret) + goto err; + if (!caps.cmd_terminate) { + ret = -EINVAL; + goto err; + } + + dmaengine_slave_config(dma->txchan, &dma->txconf); + + /* RX buffer */ + if (!dma->rx_size) + dma->rx_size = PAGE_SIZE; + + dma->rx_buf = dma_alloc_coherent(dma->rxchan->device->dev, dma->rx_size, + &dma->rx_addr, GFP_KERNEL); + if (!dma->rx_buf) { + ret = -ENOMEM; + goto err; + } + + /* TX buffer */ + dma->tx_addr = dma_map_single(dma->txchan->device->dev, + p->port.state->xmit.buf, + UART_XMIT_SIZE, + DMA_TO_DEVICE); + if (dma_mapping_error(dma->txchan->device->dev, dma->tx_addr)) { + dma_free_coherent(dma->rxchan->device->dev, dma->rx_size, + dma->rx_buf, dma->rx_addr); + ret = -ENOMEM; + goto err; + } + + dev_dbg_ratelimited(p->port.dev, "got both dma channels\n"); + + return 0; +err: + dma_release_channel(dma->txchan); +release_rx: + dma_release_channel(dma->rxchan); + return ret; +} +EXPORT_SYMBOL_GPL(serial8250_request_dma); + +void serial8250_release_dma(struct uart_8250_port *p) +{ + struct uart_8250_dma *dma = p->dma; + + if (!dma) + return; + + /* Release RX resources */ + dmaengine_terminate_sync(dma->rxchan); + dma_free_coherent(dma->rxchan->device->dev, dma->rx_size, dma->rx_buf, + dma->rx_addr); + dma_release_channel(dma->rxchan); + dma->rxchan = NULL; + + /* Release TX resources */ + dmaengine_terminate_sync(dma->txchan); + dma_unmap_single(dma->txchan->device->dev, dma->tx_addr, + UART_XMIT_SIZE, DMA_TO_DEVICE); + dma_release_channel(dma->txchan); + dma->txchan = NULL; + dma->tx_running = 0; + + dev_dbg_ratelimited(p->port.dev, "dma channels released\n"); +} +EXPORT_SYMBOL_GPL(serial8250_release_dma); diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c new file mode 100644 index 000000000..ace221afe --- /dev/null +++ b/drivers/tty/serial/8250/8250_dw.c @@ -0,0 +1,743 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Synopsys DesignWare 8250 driver. + * + * Copyright 2011 Picochip, Jamie Iles. + * Copyright 2013 Intel Corporation + * + * The Synopsys DesignWare 8250 has an extra feature whereby it detects if the + * LCR is written whilst busy. If it is, then a busy detect interrupt is + * raised, the LCR needs to be rewritten and the uart status register read. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "8250_dwlib.h" + +/* Offsets for the DesignWare specific registers */ +#define DW_UART_USR 0x1f /* UART Status Register */ + +/* DesignWare specific register fields */ +#define DW_UART_MCR_SIRE BIT(6) + +struct dw8250_data { + struct dw8250_port_data data; + + u8 usr_reg; + int msr_mask_on; + int msr_mask_off; + struct clk *clk; + struct clk *pclk; + struct notifier_block clk_notifier; + struct work_struct clk_work; + struct reset_control *rst; + + unsigned int skip_autocfg:1; + unsigned int uart_16550_compatible:1; +}; + +static inline struct dw8250_data *to_dw8250_data(struct dw8250_port_data *data) +{ + return container_of(data, struct dw8250_data, data); +} + +static inline struct dw8250_data *clk_to_dw8250_data(struct notifier_block *nb) +{ + return container_of(nb, struct dw8250_data, clk_notifier); +} + +static inline struct dw8250_data *work_to_dw8250_data(struct work_struct *work) +{ + return container_of(work, struct dw8250_data, clk_work); +} + +static inline int dw8250_modify_msr(struct uart_port *p, int offset, int value) +{ + struct dw8250_data *d = to_dw8250_data(p->private_data); + + /* Override any modem control signals if needed */ + if (offset == UART_MSR) { + value |= d->msr_mask_on; + value &= ~d->msr_mask_off; + } + + return value; +} + +static void dw8250_force_idle(struct uart_port *p) +{ + struct uart_8250_port *up = up_to_u8250p(p); + + serial8250_clear_and_reinit_fifos(up); + (void)p->serial_in(p, UART_RX); +} + +static void dw8250_check_lcr(struct uart_port *p, int value) +{ + void __iomem *offset = p->membase + (UART_LCR << p->regshift); + int tries = 1000; + + /* Make sure LCR write wasn't ignored */ + while (tries--) { + unsigned int lcr = p->serial_in(p, UART_LCR); + + if ((value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR)) + return; + + dw8250_force_idle(p); + +#ifdef CONFIG_64BIT + if (p->type == PORT_OCTEON) + __raw_writeq(value & 0xff, offset); + else +#endif + if (p->iotype == UPIO_MEM32) + writel(value, offset); + else if (p->iotype == UPIO_MEM32BE) + iowrite32be(value, offset); + else + writeb(value, offset); + } + /* + * FIXME: this deadlocks if port->lock is already held + * dev_err(p->dev, "Couldn't set LCR to %d\n", value); + */ +} + +/* Returns once the transmitter is empty or we run out of retries */ +static void dw8250_tx_wait_empty(struct uart_port *p) +{ + struct uart_8250_port *up = up_to_u8250p(p); + unsigned int tries = 20000; + unsigned int delay_threshold = tries - 1000; + unsigned int lsr; + + while (tries--) { + lsr = readb (p->membase + (UART_LSR << p->regshift)); + up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; + + if (lsr & UART_LSR_TEMT) + break; + + /* The device is first given a chance to empty without delay, + * to avoid slowdowns at high bitrates. If after 1000 tries + * the buffer has still not emptied, allow more time for low- + * speed links. */ + if (tries < delay_threshold) + udelay (1); + } +} + +static void dw8250_serial_out38x(struct uart_port *p, int offset, int value) +{ + struct dw8250_data *d = to_dw8250_data(p->private_data); + + /* Allow the TX to drain before we reconfigure */ + if (offset == UART_LCR) + dw8250_tx_wait_empty(p); + + writeb(value, p->membase + (offset << p->regshift)); + + if (offset == UART_LCR && !d->uart_16550_compatible) + dw8250_check_lcr(p, value); +} + + +static void dw8250_serial_out(struct uart_port *p, int offset, int value) +{ + struct dw8250_data *d = to_dw8250_data(p->private_data); + + writeb(value, p->membase + (offset << p->regshift)); + + if (offset == UART_LCR && !d->uart_16550_compatible) + dw8250_check_lcr(p, value); +} + +static unsigned int dw8250_serial_in(struct uart_port *p, int offset) +{ + unsigned int value = readb(p->membase + (offset << p->regshift)); + + return dw8250_modify_msr(p, offset, value); +} + +#ifdef CONFIG_64BIT +static unsigned int dw8250_serial_inq(struct uart_port *p, int offset) +{ + unsigned int value; + + value = (u8)__raw_readq(p->membase + (offset << p->regshift)); + + return dw8250_modify_msr(p, offset, value); +} + +static void dw8250_serial_outq(struct uart_port *p, int offset, int value) +{ + struct dw8250_data *d = to_dw8250_data(p->private_data); + + value &= 0xff; + __raw_writeq(value, p->membase + (offset << p->regshift)); + /* Read back to ensure register write ordering. */ + __raw_readq(p->membase + (UART_LCR << p->regshift)); + + if (offset == UART_LCR && !d->uart_16550_compatible) + dw8250_check_lcr(p, value); +} +#endif /* CONFIG_64BIT */ + +static void dw8250_serial_out32(struct uart_port *p, int offset, int value) +{ + struct dw8250_data *d = to_dw8250_data(p->private_data); + + writel(value, p->membase + (offset << p->regshift)); + + if (offset == UART_LCR && !d->uart_16550_compatible) + dw8250_check_lcr(p, value); +} + +static unsigned int dw8250_serial_in32(struct uart_port *p, int offset) +{ + unsigned int value = readl(p->membase + (offset << p->regshift)); + + return dw8250_modify_msr(p, offset, value); +} + +static void dw8250_serial_out32be(struct uart_port *p, int offset, int value) +{ + struct dw8250_data *d = to_dw8250_data(p->private_data); + + iowrite32be(value, p->membase + (offset << p->regshift)); + + if (offset == UART_LCR && !d->uart_16550_compatible) + dw8250_check_lcr(p, value); +} + +static unsigned int dw8250_serial_in32be(struct uart_port *p, int offset) +{ + unsigned int value = ioread32be(p->membase + (offset << p->regshift)); + + return dw8250_modify_msr(p, offset, value); +} + + +static int dw8250_handle_irq(struct uart_port *p) +{ + struct uart_8250_port *up = up_to_u8250p(p); + struct dw8250_data *d = to_dw8250_data(p->private_data); + unsigned int iir = p->serial_in(p, UART_IIR); + unsigned int status; + unsigned long flags; + + /* + * There are ways to get Designware-based UARTs into a state where + * they are asserting UART_IIR_RX_TIMEOUT but there is no actual + * data available. If we see such a case then we'll do a bogus + * read. If we don't do this then the "RX TIMEOUT" interrupt will + * fire forever. + * + * This problem has only been observed so far when not in DMA mode + * so we limit the workaround only to non-DMA mode. + */ + if (!up->dma && ((iir & 0x3f) == UART_IIR_RX_TIMEOUT)) { + spin_lock_irqsave(&p->lock, flags); + status = p->serial_in(p, UART_LSR); + + if (!(status & (UART_LSR_DR | UART_LSR_BI))) + (void) p->serial_in(p, UART_RX); + + spin_unlock_irqrestore(&p->lock, flags); + } + + if (serial8250_handle_irq(p, iir)) + return 1; + + if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) { + /* Clear the USR */ + (void)p->serial_in(p, d->usr_reg); + + return 1; + } + + return 0; +} + +static void dw8250_clk_work_cb(struct work_struct *work) +{ + struct dw8250_data *d = work_to_dw8250_data(work); + struct uart_8250_port *up; + unsigned long rate; + + rate = clk_get_rate(d->clk); + if (rate <= 0) + return; + + up = serial8250_get_port(d->data.line); + + serial8250_update_uartclk(&up->port, rate); +} + +static int dw8250_clk_notifier_cb(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct dw8250_data *d = clk_to_dw8250_data(nb); + + /* + * We have no choice but to defer the uartclk update due to two + * deadlocks. First one is caused by a recursive mutex lock which + * happens when clk_set_rate() is called from dw8250_set_termios(). + * Second deadlock is more tricky and is caused by an inverted order of + * the clk and tty-port mutexes lock. It happens if clock rate change + * is requested asynchronously while set_termios() is executed between + * tty-port mutex lock and clk_set_rate() function invocation and + * vise-versa. Anyway if we didn't have the reference clock alteration + * in the dw8250_set_termios() method we wouldn't have needed this + * deferred event handling complication. + */ + if (event == POST_RATE_CHANGE) { + queue_work(system_unbound_wq, &d->clk_work); + return NOTIFY_OK; + } + + return NOTIFY_DONE; +} + +static void +dw8250_do_pm(struct uart_port *port, unsigned int state, unsigned int old) +{ + if (!state) + pm_runtime_get_sync(port->dev); + + serial8250_do_pm(port, state, old); + + if (state) + pm_runtime_put_sync_suspend(port->dev); +} + +static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios, + struct ktermios *old) +{ + unsigned long newrate = tty_termios_baud_rate(termios) * 16; + struct dw8250_data *d = to_dw8250_data(p->private_data); + long rate; + int ret; + + clk_disable_unprepare(d->clk); + rate = clk_round_rate(d->clk, newrate); + if (rate > 0) { + /* + * Premilinary set the uartclk to the new clock rate so the + * clock update event handler caused by the clk_set_rate() + * calling wouldn't actually update the UART divisor since + * we about to do this anyway. + */ + swap(p->uartclk, rate); + ret = clk_set_rate(d->clk, newrate); + if (ret) + swap(p->uartclk, rate); + } + clk_prepare_enable(d->clk); + + p->status &= ~UPSTAT_AUTOCTS; + if (termios->c_cflag & CRTSCTS) + p->status |= UPSTAT_AUTOCTS; + + serial8250_do_set_termios(p, termios, old); +} + +static void dw8250_set_ldisc(struct uart_port *p, struct ktermios *termios) +{ + struct uart_8250_port *up = up_to_u8250p(p); + unsigned int mcr = p->serial_in(p, UART_MCR); + + if (up->capabilities & UART_CAP_IRDA) { + if (termios->c_line == N_IRDA) + mcr |= DW_UART_MCR_SIRE; + else + mcr &= ~DW_UART_MCR_SIRE; + + p->serial_out(p, UART_MCR, mcr); + } + serial8250_do_set_ldisc(p, termios); +} + +/* + * dw8250_fallback_dma_filter will prevent the UART from getting just any free + * channel on platforms that have DMA engines, but don't have any channels + * assigned to the UART. + * + * REVISIT: This is a work around for limitation in the DMA Engine API. Once the + * core problem is fixed, this function is no longer needed. + */ +static bool dw8250_fallback_dma_filter(struct dma_chan *chan, void *param) +{ + return false; +} + +static bool dw8250_idma_filter(struct dma_chan *chan, void *param) +{ + return param == chan->device->dev; +} + +static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data) +{ + if (p->dev->of_node) { + struct device_node *np = p->dev->of_node; + int id; + + /* get index of serial line, if found in DT aliases */ + id = of_alias_get_id(np, "serial"); + if (id >= 0) + p->line = id; +#ifdef CONFIG_64BIT + if (of_device_is_compatible(np, "cavium,octeon-3860-uart")) { + p->serial_in = dw8250_serial_inq; + p->serial_out = dw8250_serial_outq; + p->flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE; + p->type = PORT_OCTEON; + data->usr_reg = 0x27; + data->skip_autocfg = true; + } +#endif + if (of_device_is_big_endian(p->dev->of_node)) { + p->iotype = UPIO_MEM32BE; + p->serial_in = dw8250_serial_in32be; + p->serial_out = dw8250_serial_out32be; + } + if (of_device_is_compatible(np, "marvell,armada-38x-uart")) + p->serial_out = dw8250_serial_out38x; + + } else if (acpi_dev_present("APMC0D08", NULL, -1)) { + p->iotype = UPIO_MEM32; + p->regshift = 2; + p->serial_in = dw8250_serial_in32; + data->uart_16550_compatible = true; + } + + /* Platforms with iDMA 64-bit */ + if (platform_get_resource_byname(to_platform_device(p->dev), + IORESOURCE_MEM, "lpss_priv")) { + data->data.dma.rx_param = p->dev->parent; + data->data.dma.tx_param = p->dev->parent; + data->data.dma.fn = dw8250_idma_filter; + } +} + +static int dw8250_probe(struct platform_device *pdev) +{ + struct uart_8250_port uart = {}, *up = &uart; + struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + struct uart_port *p = &up->port; + struct device *dev = &pdev->dev; + struct dw8250_data *data; + int irq; + int err; + u32 val; + + if (!regs) { + dev_err(dev, "no registers defined\n"); + return -EINVAL; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + spin_lock_init(&p->lock); + p->mapbase = regs->start; + p->irq = irq; + p->handle_irq = dw8250_handle_irq; + p->pm = dw8250_do_pm; + p->type = PORT_8250; + p->flags = UPF_SHARE_IRQ | UPF_FIXED_PORT; + p->dev = dev; + p->iotype = UPIO_MEM; + p->serial_in = dw8250_serial_in; + p->serial_out = dw8250_serial_out; + p->set_ldisc = dw8250_set_ldisc; + p->set_termios = dw8250_set_termios; + + p->membase = devm_ioremap(dev, regs->start, resource_size(regs)); + if (!p->membase) + return -ENOMEM; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->data.dma.fn = dw8250_fallback_dma_filter; + data->usr_reg = DW_UART_USR; + p->private_data = &data->data; + + data->uart_16550_compatible = device_property_read_bool(dev, + "snps,uart-16550-compatible"); + + err = device_property_read_u32(dev, "reg-shift", &val); + if (!err) + p->regshift = val; + + err = device_property_read_u32(dev, "reg-io-width", &val); + if (!err && val == 4) { + p->iotype = UPIO_MEM32; + p->serial_in = dw8250_serial_in32; + p->serial_out = dw8250_serial_out32; + } + + if (device_property_read_bool(dev, "dcd-override")) { + /* Always report DCD as active */ + data->msr_mask_on |= UART_MSR_DCD; + data->msr_mask_off |= UART_MSR_DDCD; + } + + if (device_property_read_bool(dev, "dsr-override")) { + /* Always report DSR as active */ + data->msr_mask_on |= UART_MSR_DSR; + data->msr_mask_off |= UART_MSR_DDSR; + } + + if (device_property_read_bool(dev, "cts-override")) { + /* Always report CTS as active */ + data->msr_mask_on |= UART_MSR_CTS; + data->msr_mask_off |= UART_MSR_DCTS; + } + + if (device_property_read_bool(dev, "ri-override")) { + /* Always report Ring indicator as inactive */ + data->msr_mask_off |= UART_MSR_RI; + data->msr_mask_off |= UART_MSR_TERI; + } + + /* Always ask for fixed clock rate from a property. */ + device_property_read_u32(dev, "clock-frequency", &p->uartclk); + + /* If there is separate baudclk, get the rate from it. */ + data->clk = devm_clk_get_optional(dev, "baudclk"); + if (data->clk == NULL) + data->clk = devm_clk_get_optional(dev, NULL); + if (IS_ERR(data->clk)) + return PTR_ERR(data->clk); + + INIT_WORK(&data->clk_work, dw8250_clk_work_cb); + data->clk_notifier.notifier_call = dw8250_clk_notifier_cb; + + err = clk_prepare_enable(data->clk); + if (err) + dev_warn(dev, "could not enable optional baudclk: %d\n", err); + + if (data->clk) + p->uartclk = clk_get_rate(data->clk); + + /* If no clock rate is defined, fail. */ + if (!p->uartclk) { + dev_err(dev, "clock rate not defined\n"); + err = -EINVAL; + goto err_clk; + } + + data->pclk = devm_clk_get_optional(dev, "apb_pclk"); + if (IS_ERR(data->pclk)) { + err = PTR_ERR(data->pclk); + goto err_clk; + } + + err = clk_prepare_enable(data->pclk); + if (err) { + dev_err(dev, "could not enable apb_pclk\n"); + goto err_clk; + } + + data->rst = devm_reset_control_get_optional_exclusive(dev, NULL); + if (IS_ERR(data->rst)) { + err = PTR_ERR(data->rst); + goto err_pclk; + } + reset_control_deassert(data->rst); + + dw8250_quirks(p, data); + + /* If the Busy Functionality is not implemented, don't handle it */ + if (data->uart_16550_compatible) + p->handle_irq = NULL; + + if (!data->skip_autocfg) + dw8250_setup_port(p); + + /* If we have a valid fifosize, try hooking up DMA */ + if (p->fifosize) { + data->data.dma.rxconf.src_maxburst = p->fifosize / 4; + data->data.dma.txconf.dst_maxburst = p->fifosize / 4; + up->dma = &data->data.dma; + } + + data->data.line = serial8250_register_8250_port(up); + if (data->data.line < 0) { + err = data->data.line; + goto err_reset; + } + + /* + * Some platforms may provide a reference clock shared between several + * devices. In this case any clock state change must be known to the + * UART port at least post factum. + */ + if (data->clk) { + err = clk_notifier_register(data->clk, &data->clk_notifier); + if (err) + dev_warn(p->dev, "Failed to set the clock notifier\n"); + else + queue_work(system_unbound_wq, &data->clk_work); + } + + platform_set_drvdata(pdev, data); + + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + + return 0; + +err_reset: + reset_control_assert(data->rst); + +err_pclk: + clk_disable_unprepare(data->pclk); + +err_clk: + clk_disable_unprepare(data->clk); + + return err; +} + +static int dw8250_remove(struct platform_device *pdev) +{ + struct dw8250_data *data = platform_get_drvdata(pdev); + struct device *dev = &pdev->dev; + + pm_runtime_get_sync(dev); + + if (data->clk) { + clk_notifier_unregister(data->clk, &data->clk_notifier); + + flush_work(&data->clk_work); + } + + serial8250_unregister_port(data->data.line); + + reset_control_assert(data->rst); + + clk_disable_unprepare(data->pclk); + + clk_disable_unprepare(data->clk); + + pm_runtime_disable(dev); + pm_runtime_put_noidle(dev); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int dw8250_suspend(struct device *dev) +{ + struct dw8250_data *data = dev_get_drvdata(dev); + + serial8250_suspend_port(data->data.line); + + return 0; +} + +static int dw8250_resume(struct device *dev) +{ + struct dw8250_data *data = dev_get_drvdata(dev); + + serial8250_resume_port(data->data.line); + + return 0; +} +#endif /* CONFIG_PM_SLEEP */ + +#ifdef CONFIG_PM +static int dw8250_runtime_suspend(struct device *dev) +{ + struct dw8250_data *data = dev_get_drvdata(dev); + + clk_disable_unprepare(data->clk); + + clk_disable_unprepare(data->pclk); + + return 0; +} + +static int dw8250_runtime_resume(struct device *dev) +{ + struct dw8250_data *data = dev_get_drvdata(dev); + + clk_prepare_enable(data->pclk); + + clk_prepare_enable(data->clk); + + return 0; +} +#endif + +static const struct dev_pm_ops dw8250_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(dw8250_suspend, dw8250_resume) + SET_RUNTIME_PM_OPS(dw8250_runtime_suspend, dw8250_runtime_resume, NULL) +}; + +static const struct of_device_id dw8250_of_match[] = { + { .compatible = "snps,dw-apb-uart" }, + { .compatible = "cavium,octeon-3860-uart" }, + { .compatible = "marvell,armada-38x-uart" }, + { .compatible = "renesas,rzn1-uart" }, + { /* Sentinel */ } +}; +MODULE_DEVICE_TABLE(of, dw8250_of_match); + +static const struct acpi_device_id dw8250_acpi_match[] = { + { "INT33C4", 0 }, + { "INT33C5", 0 }, + { "INT3434", 0 }, + { "INT3435", 0 }, + { "80860F0A", 0 }, + { "8086228A", 0 }, + { "APMC0D08", 0}, + { "AMD0020", 0 }, + { "AMDI0020", 0 }, + { "AMDI0022", 0 }, + { "BRCM2032", 0 }, + { "HISI0031", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(acpi, dw8250_acpi_match); + +static struct platform_driver dw8250_platform_driver = { + .driver = { + .name = "dw-apb-uart", + .pm = &dw8250_pm_ops, + .of_match_table = dw8250_of_match, + .acpi_match_table = dw8250_acpi_match, + }, + .probe = dw8250_probe, + .remove = dw8250_remove, +}; + +module_platform_driver(dw8250_platform_driver); + +MODULE_AUTHOR("Jamie Iles"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Synopsys DesignWare 8250 serial port driver"); +MODULE_ALIAS("platform:dw-apb-uart"); diff --git a/drivers/tty/serial/8250/8250_dwlib.c b/drivers/tty/serial/8250/8250_dwlib.c new file mode 100644 index 000000000..1cf229cca --- /dev/null +++ b/drivers/tty/serial/8250/8250_dwlib.c @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Synopsys DesignWare 8250 library. */ + +#include +#include +#include +#include +#include +#include + +#include "8250_dwlib.h" + +/* Offsets for the DesignWare specific registers */ +#define DW_UART_DLF 0xc0 /* Divisor Latch Fraction Register */ +#define DW_UART_CPR 0xf4 /* Component Parameter Register */ +#define DW_UART_UCV 0xf8 /* UART Component Version */ + +/* Component Parameter Register bits */ +#define DW_UART_CPR_ABP_DATA_WIDTH (3 << 0) +#define DW_UART_CPR_AFCE_MODE (1 << 4) +#define DW_UART_CPR_THRE_MODE (1 << 5) +#define DW_UART_CPR_SIR_MODE (1 << 6) +#define DW_UART_CPR_SIR_LP_MODE (1 << 7) +#define DW_UART_CPR_ADDITIONAL_FEATURES (1 << 8) +#define DW_UART_CPR_FIFO_ACCESS (1 << 9) +#define DW_UART_CPR_FIFO_STAT (1 << 10) +#define DW_UART_CPR_SHADOW (1 << 11) +#define DW_UART_CPR_ENCODED_PARMS (1 << 12) +#define DW_UART_CPR_DMA_EXTRA (1 << 13) +#define DW_UART_CPR_FIFO_MODE (0xff << 16) + +/* Helper for FIFO size calculation */ +#define DW_UART_CPR_FIFO_SIZE(a) (((a >> 16) & 0xff) * 16) + +static inline u32 dw8250_readl_ext(struct uart_port *p, int offset) +{ + if (p->iotype == UPIO_MEM32BE) + return ioread32be(p->membase + offset); + return readl(p->membase + offset); +} + +static inline void dw8250_writel_ext(struct uart_port *p, int offset, u32 reg) +{ + if (p->iotype == UPIO_MEM32BE) + iowrite32be(reg, p->membase + offset); + else + writel(reg, p->membase + offset); +} + +/* + * divisor = div(I) + div(F) + * "I" means integer, "F" means fractional + * quot = div(I) = clk / (16 * baud) + * frac = div(F) * 2^dlf_size + * + * let rem = clk % (16 * baud) + * we have: div(F) * (16 * baud) = rem + * so frac = 2^dlf_size * rem / (16 * baud) = (rem << dlf_size) / (16 * baud) + */ +static unsigned int dw8250_get_divisor(struct uart_port *p, unsigned int baud, + unsigned int *frac) +{ + unsigned int quot, rem, base_baud = baud * 16; + struct dw8250_port_data *d = p->private_data; + + quot = p->uartclk / base_baud; + rem = p->uartclk % base_baud; + *frac = DIV_ROUND_CLOSEST(rem << d->dlf_size, base_baud); + + return quot; +} + +static void dw8250_set_divisor(struct uart_port *p, unsigned int baud, + unsigned int quot, unsigned int quot_frac) +{ + dw8250_writel_ext(p, DW_UART_DLF, quot_frac); + serial8250_do_set_divisor(p, baud, quot, quot_frac); +} + +void dw8250_setup_port(struct uart_port *p) +{ + struct uart_8250_port *up = up_to_u8250p(p); + u32 reg, old_dlf; + + /* + * If the Component Version Register returns zero, we know that + * ADDITIONAL_FEATURES are not enabled. No need to go any further. + */ + reg = dw8250_readl_ext(p, DW_UART_UCV); + if (!reg) + return; + + dev_dbg(p->dev, "Designware UART version %c.%c%c\n", + (reg >> 24) & 0xff, (reg >> 16) & 0xff, (reg >> 8) & 0xff); + + /* Preserve value written by firmware or bootloader */ + old_dlf = dw8250_readl_ext(p, DW_UART_DLF); + dw8250_writel_ext(p, DW_UART_DLF, ~0U); + reg = dw8250_readl_ext(p, DW_UART_DLF); + dw8250_writel_ext(p, DW_UART_DLF, old_dlf); + + if (reg) { + struct dw8250_port_data *d = p->private_data; + + d->dlf_size = fls(reg); + p->get_divisor = dw8250_get_divisor; + p->set_divisor = dw8250_set_divisor; + } + + reg = dw8250_readl_ext(p, DW_UART_CPR); + if (!reg) + return; + + /* Select the type based on FIFO */ + if (reg & DW_UART_CPR_FIFO_MODE) { + p->type = PORT_16550A; + p->flags |= UPF_FIXED_TYPE; + p->fifosize = DW_UART_CPR_FIFO_SIZE(reg); + up->capabilities = UART_CAP_FIFO; + } + + if (reg & DW_UART_CPR_AFCE_MODE) + up->capabilities |= UART_CAP_AFE; + + if (reg & DW_UART_CPR_SIR_MODE) + up->capabilities |= UART_CAP_IRDA; +} +EXPORT_SYMBOL_GPL(dw8250_setup_port); diff --git a/drivers/tty/serial/8250/8250_dwlib.h b/drivers/tty/serial/8250/8250_dwlib.h new file mode 100644 index 000000000..9a1295383 --- /dev/null +++ b/drivers/tty/serial/8250/8250_dwlib.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* Synopsys DesignWare 8250 library header file. */ + +#include + +#include "8250.h" + +struct dw8250_port_data { + /* Port properties */ + int line; + + /* DMA operations */ + struct uart_8250_dma dma; + + /* Hardware configuration */ + u8 dlf_size; +}; + +void dw8250_setup_port(struct uart_port *p); diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c new file mode 100644 index 000000000..ccacbf0f1 --- /dev/null +++ b/drivers/tty/serial/8250/8250_early.c @@ -0,0 +1,221 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Early serial console for 8250/16550 devices + * + * (c) Copyright 2004 Hewlett-Packard Development Company, L.P. + * Bjorn Helgaas + * + * Based on the 8250.c serial driver, Copyright (C) 2001 Russell King, + * and on early_printk.c by Andi Kleen. + * + * This is for use before the serial driver has initialized, in + * particular, before the UARTs have been discovered and named. + * Instead of specifying the console device as, e.g., "ttyS0", + * we locate the device directly by its MMIO or I/O port address. + * + * The user can specify the device directly, e.g., + * earlycon=uart8250,io,0x3f8,9600n8 + * earlycon=uart8250,mmio,0xff5e0000,115200n8 + * earlycon=uart8250,mmio32,0xff5e0000,115200n8 + * or + * console=uart8250,io,0x3f8,9600n8 + * console=uart8250,mmio,0xff5e0000,115200n8 + * console=uart8250,mmio32,0xff5e0000,115200n8 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static unsigned int serial8250_early_in(struct uart_port *port, int offset) +{ + int reg_offset = offset; + offset <<= port->regshift; + + switch (port->iotype) { + case UPIO_MEM: + return readb(port->membase + offset); + case UPIO_MEM16: + return readw(port->membase + offset); + case UPIO_MEM32: + return readl(port->membase + offset); + case UPIO_MEM32BE: + return ioread32be(port->membase + offset); + case UPIO_PORT: + return inb(port->iobase + offset); + case UPIO_AU: + return port->serial_in(port, reg_offset); + default: + return 0; + } +} + +static void serial8250_early_out(struct uart_port *port, int offset, int value) +{ + int reg_offset = offset; + offset <<= port->regshift; + + switch (port->iotype) { + case UPIO_MEM: + writeb(value, port->membase + offset); + break; + case UPIO_MEM16: + writew(value, port->membase + offset); + break; + case UPIO_MEM32: + writel(value, port->membase + offset); + break; + case UPIO_MEM32BE: + iowrite32be(value, port->membase + offset); + break; + case UPIO_PORT: + outb(value, port->iobase + offset); + break; + case UPIO_AU: + port->serial_out(port, reg_offset, value); + break; + } +} + +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +static void serial_putc(struct uart_port *port, int c) +{ + unsigned int status; + + serial8250_early_out(port, UART_TX, c); + + for (;;) { + status = serial8250_early_in(port, UART_LSR); + if ((status & BOTH_EMPTY) == BOTH_EMPTY) + break; + cpu_relax(); + } +} + +static void early_serial8250_write(struct console *console, + const char *s, unsigned int count) +{ + struct earlycon_device *device = console->data; + struct uart_port *port = &device->port; + + uart_console_write(port, s, count, serial_putc); +} + +#ifdef CONFIG_CONSOLE_POLL +static int early_serial8250_read(struct console *console, + char *s, unsigned int count) +{ + struct earlycon_device *device = console->data; + struct uart_port *port = &device->port; + unsigned int status; + int num_read = 0; + + while (num_read < count) { + status = serial8250_early_in(port, UART_LSR); + if (!(status & UART_LSR_DR)) + break; + s[num_read++] = serial8250_early_in(port, UART_RX); + } + + return num_read; +} +#else +#define early_serial8250_read NULL +#endif + +static void __init init_port(struct earlycon_device *device) +{ + struct uart_port *port = &device->port; + unsigned int divisor; + unsigned char c; + unsigned int ier; + + serial8250_early_out(port, UART_LCR, 0x3); /* 8n1 */ + ier = serial8250_early_in(port, UART_IER); + serial8250_early_out(port, UART_IER, ier & UART_IER_UUE); /* no interrupt */ + serial8250_early_out(port, UART_FCR, 0); /* no fifo */ + serial8250_early_out(port, UART_MCR, 0x3); /* DTR + RTS */ + + if (port->uartclk) { + divisor = DIV_ROUND_CLOSEST(port->uartclk, 16 * device->baud); + c = serial8250_early_in(port, UART_LCR); + serial8250_early_out(port, UART_LCR, c | UART_LCR_DLAB); + serial8250_early_out(port, UART_DLL, divisor & 0xff); + serial8250_early_out(port, UART_DLM, (divisor >> 8) & 0xff); + serial8250_early_out(port, UART_LCR, c & ~UART_LCR_DLAB); + } +} + +int __init early_serial8250_setup(struct earlycon_device *device, + const char *options) +{ + if (!(device->port.membase || device->port.iobase)) + return -ENODEV; + + if (!device->baud) { + struct uart_port *port = &device->port; + unsigned int ier; + + /* assume the device was initialized, only mask interrupts */ + ier = serial8250_early_in(port, UART_IER); + serial8250_early_out(port, UART_IER, ier & UART_IER_UUE); + } else + init_port(device); + + device->con->write = early_serial8250_write; + device->con->read = early_serial8250_read; + return 0; +} +EARLYCON_DECLARE(uart8250, early_serial8250_setup); +EARLYCON_DECLARE(uart, early_serial8250_setup); +OF_EARLYCON_DECLARE(ns16550, "ns16550", early_serial8250_setup); +OF_EARLYCON_DECLARE(ns16550a, "ns16550a", early_serial8250_setup); +OF_EARLYCON_DECLARE(uart, "nvidia,tegra20-uart", early_serial8250_setup); +OF_EARLYCON_DECLARE(uart, "snps,dw-apb-uart", early_serial8250_setup); + +#ifdef CONFIG_SERIAL_8250_OMAP + +static int __init early_omap8250_setup(struct earlycon_device *device, + const char *options) +{ + struct uart_port *port = &device->port; + + if (!(device->port.membase || device->port.iobase)) + return -ENODEV; + + port->regshift = 2; + device->con->write = early_serial8250_write; + return 0; +} + +OF_EARLYCON_DECLARE(omap8250, "ti,omap2-uart", early_omap8250_setup); +OF_EARLYCON_DECLARE(omap8250, "ti,omap3-uart", early_omap8250_setup); +OF_EARLYCON_DECLARE(omap8250, "ti,omap4-uart", early_omap8250_setup); +OF_EARLYCON_DECLARE(omap8250, "ti,am654-uart", early_omap8250_setup); + +#endif + +#ifdef CONFIG_SERIAL_8250_RT288X + +unsigned int au_serial_in(struct uart_port *p, int offset); +void au_serial_out(struct uart_port *p, int offset, int value); + +static int __init early_au_setup(struct earlycon_device *dev, const char *opt) +{ + dev->port.serial_in = au_serial_in; + dev->port.serial_out = au_serial_out; + dev->port.iotype = UPIO_AU; + dev->con->write = early_serial8250_write; + return 0; +} +OF_EARLYCON_DECLARE(palmchip, "ralink,rt2880-uart", early_au_setup); + +#endif diff --git a/drivers/tty/serial/8250/8250_em.c b/drivers/tty/serial/8250/8250_em.c new file mode 100644 index 000000000..d94c3811a --- /dev/null +++ b/drivers/tty/serial/8250/8250_em.c @@ -0,0 +1,163 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Renesas Emma Mobile 8250 driver + * + * Copyright (C) 2012 Magnus Damm + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "8250.h" + +#define UART_DLL_EM 9 +#define UART_DLM_EM 10 + +struct serial8250_em_priv { + struct clk *sclk; + int line; +}; + +static void serial8250_em_serial_out(struct uart_port *p, int offset, int value) +{ + switch (offset) { + case UART_TX: /* TX @ 0x00 */ + writeb(value, p->membase); + break; + case UART_FCR: /* FCR @ 0x0c (+1) */ + case UART_LCR: /* LCR @ 0x10 (+1) */ + case UART_MCR: /* MCR @ 0x14 (+1) */ + case UART_SCR: /* SCR @ 0x20 (+1) */ + writel(value, p->membase + ((offset + 1) << 2)); + break; + case UART_IER: /* IER @ 0x04 */ + value &= 0x0f; /* only 4 valid bits - not Xscale */ + fallthrough; + case UART_DLL_EM: /* DLL @ 0x24 (+9) */ + case UART_DLM_EM: /* DLM @ 0x28 (+9) */ + writel(value, p->membase + (offset << 2)); + } +} + +static unsigned int serial8250_em_serial_in(struct uart_port *p, int offset) +{ + switch (offset) { + case UART_RX: /* RX @ 0x00 */ + return readb(p->membase); + case UART_MCR: /* MCR @ 0x14 (+1) */ + case UART_LSR: /* LSR @ 0x18 (+1) */ + case UART_MSR: /* MSR @ 0x1c (+1) */ + case UART_SCR: /* SCR @ 0x20 (+1) */ + return readl(p->membase + ((offset + 1) << 2)); + case UART_IER: /* IER @ 0x04 */ + case UART_IIR: /* IIR @ 0x08 */ + case UART_DLL_EM: /* DLL @ 0x24 (+9) */ + case UART_DLM_EM: /* DLM @ 0x28 (+9) */ + return readl(p->membase + (offset << 2)); + } + return 0; +} + +static int serial8250_em_serial_dl_read(struct uart_8250_port *up) +{ + return serial_in(up, UART_DLL_EM) | serial_in(up, UART_DLM_EM) << 8; +} + +static void serial8250_em_serial_dl_write(struct uart_8250_port *up, int value) +{ + serial_out(up, UART_DLL_EM, value & 0xff); + serial_out(up, UART_DLM_EM, value >> 8 & 0xff); +} + +static int serial8250_em_probe(struct platform_device *pdev) +{ + struct serial8250_em_priv *priv; + struct uart_8250_port up; + struct resource *regs; + int irq, ret; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!regs) { + dev_err(&pdev->dev, "missing registers\n"); + return -EINVAL; + } + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->sclk = devm_clk_get(&pdev->dev, "sclk"); + if (IS_ERR(priv->sclk)) { + dev_err(&pdev->dev, "unable to get clock\n"); + return PTR_ERR(priv->sclk); + } + + memset(&up, 0, sizeof(up)); + up.port.mapbase = regs->start; + up.port.irq = irq; + up.port.type = PORT_16750; + up.port.flags = UPF_FIXED_PORT | UPF_IOREMAP | UPF_FIXED_TYPE; + up.port.dev = &pdev->dev; + up.port.private_data = priv; + + clk_prepare_enable(priv->sclk); + up.port.uartclk = clk_get_rate(priv->sclk); + + up.port.iotype = UPIO_MEM32; + up.port.serial_in = serial8250_em_serial_in; + up.port.serial_out = serial8250_em_serial_out; + up.dl_read = serial8250_em_serial_dl_read; + up.dl_write = serial8250_em_serial_dl_write; + + ret = serial8250_register_8250_port(&up); + if (ret < 0) { + dev_err(&pdev->dev, "unable to register 8250 port\n"); + clk_disable_unprepare(priv->sclk); + return ret; + } + + priv->line = ret; + platform_set_drvdata(pdev, priv); + return 0; +} + +static int serial8250_em_remove(struct platform_device *pdev) +{ + struct serial8250_em_priv *priv = platform_get_drvdata(pdev); + + serial8250_unregister_port(priv->line); + clk_disable_unprepare(priv->sclk); + return 0; +} + +static const struct of_device_id serial8250_em_dt_ids[] = { + { .compatible = "renesas,em-uart", }, + {}, +}; +MODULE_DEVICE_TABLE(of, serial8250_em_dt_ids); + +static struct platform_driver serial8250_em_platform_driver = { + .driver = { + .name = "serial8250-em", + .of_match_table = serial8250_em_dt_ids, + }, + .probe = serial8250_em_probe, + .remove = serial8250_em_remove, +}; + +module_platform_driver(serial8250_em_platform_driver); + +MODULE_AUTHOR("Magnus Damm"); +MODULE_DESCRIPTION("Renesas Emma Mobile 8250 Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c new file mode 100644 index 000000000..5c2adf140 --- /dev/null +++ b/drivers/tty/serial/8250/8250_exar.c @@ -0,0 +1,877 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Probe module for 8250/16550-type Exar chips PCI serial ports. + * + * Based on drivers/tty/serial/8250/8250_pci.c, + * + * Copyright (C) 2017 Sudip Mukherjee, All Rights Reserved. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "8250.h" + +#define PCI_DEVICE_ID_ACCESSIO_COM_2S 0x1052 +#define PCI_DEVICE_ID_ACCESSIO_COM_4S 0x105d +#define PCI_DEVICE_ID_ACCESSIO_COM_8S 0x106c +#define PCI_DEVICE_ID_ACCESSIO_COM232_8 0x10a8 +#define PCI_DEVICE_ID_ACCESSIO_COM_2SM 0x10d2 +#define PCI_DEVICE_ID_ACCESSIO_COM_4SM 0x10db +#define PCI_DEVICE_ID_ACCESSIO_COM_8SM 0x10ea + +#define PCI_DEVICE_ID_COMMTECH_4224PCI335 0x0002 +#define PCI_DEVICE_ID_COMMTECH_4222PCI335 0x0004 +#define PCI_DEVICE_ID_COMMTECH_2324PCI335 0x000a +#define PCI_DEVICE_ID_COMMTECH_2328PCI335 0x000b +#define PCI_DEVICE_ID_COMMTECH_4224PCIE 0x0020 +#define PCI_DEVICE_ID_COMMTECH_4228PCIE 0x0021 +#define PCI_DEVICE_ID_COMMTECH_4222PCIE 0x0022 + +#define PCI_DEVICE_ID_EXAR_XR17V4358 0x4358 +#define PCI_DEVICE_ID_EXAR_XR17V8358 0x8358 + +#define PCI_SUBDEVICE_ID_USR_2980 0x0128 +#define PCI_SUBDEVICE_ID_USR_2981 0x0129 + +#define PCI_DEVICE_ID_SEALEVEL_710xC 0x1001 +#define PCI_DEVICE_ID_SEALEVEL_720xC 0x1002 +#define PCI_DEVICE_ID_SEALEVEL_740xC 0x1004 +#define PCI_DEVICE_ID_SEALEVEL_780xC 0x1008 +#define PCI_DEVICE_ID_SEALEVEL_716xC 0x1010 + +#define UART_EXAR_INT0 0x80 +#define UART_EXAR_8XMODE 0x88 /* 8X sampling rate select */ +#define UART_EXAR_SLEEP 0x8b /* Sleep mode */ +#define UART_EXAR_DVID 0x8d /* Device identification */ + +#define UART_EXAR_FCTR 0x08 /* Feature Control Register */ +#define UART_FCTR_EXAR_IRDA 0x10 /* IrDa data encode select */ +#define UART_FCTR_EXAR_485 0x20 /* Auto 485 half duplex dir ctl */ +#define UART_FCTR_EXAR_TRGA 0x00 /* FIFO trigger table A */ +#define UART_FCTR_EXAR_TRGB 0x60 /* FIFO trigger table B */ +#define UART_FCTR_EXAR_TRGC 0x80 /* FIFO trigger table C */ +#define UART_FCTR_EXAR_TRGD 0xc0 /* FIFO trigger table D programmable */ + +#define UART_EXAR_TXTRG 0x0a /* Tx FIFO trigger level write-only */ +#define UART_EXAR_RXTRG 0x0b /* Rx FIFO trigger level write-only */ + +#define UART_EXAR_MPIOINT_7_0 0x8f /* MPIOINT[7:0] */ +#define UART_EXAR_MPIOLVL_7_0 0x90 /* MPIOLVL[7:0] */ +#define UART_EXAR_MPIO3T_7_0 0x91 /* MPIO3T[7:0] */ +#define UART_EXAR_MPIOINV_7_0 0x92 /* MPIOINV[7:0] */ +#define UART_EXAR_MPIOSEL_7_0 0x93 /* MPIOSEL[7:0] */ +#define UART_EXAR_MPIOOD_7_0 0x94 /* MPIOOD[7:0] */ +#define UART_EXAR_MPIOINT_15_8 0x95 /* MPIOINT[15:8] */ +#define UART_EXAR_MPIOLVL_15_8 0x96 /* MPIOLVL[15:8] */ +#define UART_EXAR_MPIO3T_15_8 0x97 /* MPIO3T[15:8] */ +#define UART_EXAR_MPIOINV_15_8 0x98 /* MPIOINV[15:8] */ +#define UART_EXAR_MPIOSEL_15_8 0x99 /* MPIOSEL[15:8] */ +#define UART_EXAR_MPIOOD_15_8 0x9a /* MPIOOD[15:8] */ + +#define UART_EXAR_RS485_DLY(x) ((x) << 4) + +/* + * IOT2040 MPIO wiring semantics: + * + * MPIO Port Function + * ---- ---- -------- + * 0 2 Mode bit 0 + * 1 2 Mode bit 1 + * 2 2 Terminate bus + * 3 - + * 4 3 Mode bit 0 + * 5 3 Mode bit 1 + * 6 3 Terminate bus + * 7 - + * 8 2 Enable + * 9 3 Enable + * 10 - Red LED + * 11..15 - + */ + +/* IOT2040 MPIOs 0..7 */ +#define IOT2040_UART_MODE_RS232 0x01 +#define IOT2040_UART_MODE_RS485 0x02 +#define IOT2040_UART_MODE_RS422 0x03 +#define IOT2040_UART_TERMINATE_BUS 0x04 + +#define IOT2040_UART1_MASK 0x0f +#define IOT2040_UART2_SHIFT 4 + +#define IOT2040_UARTS_DEFAULT_MODE 0x11 /* both RS232 */ +#define IOT2040_UARTS_GPIO_LO_MODE 0x88 /* reserved pins as input */ + +/* IOT2040 MPIOs 8..15 */ +#define IOT2040_UARTS_ENABLE 0x03 +#define IOT2040_UARTS_GPIO_HI_MODE 0xF8 /* enable & LED as outputs */ + +struct exar8250; + +struct exar8250_platform { + int (*rs485_config)(struct uart_port *, struct serial_rs485 *); + int (*register_gpio)(struct pci_dev *, struct uart_8250_port *); +}; + +/** + * struct exar8250_board - board information + * @num_ports: number of serial ports + * @reg_shift: describes UART register mapping in PCI memory + * @setup: quirk run at ->probe() stage + * @exit: quirk run at ->remove() stage + */ +struct exar8250_board { + unsigned int num_ports; + unsigned int reg_shift; + int (*setup)(struct exar8250 *, struct pci_dev *, + struct uart_8250_port *, int); + void (*exit)(struct pci_dev *pcidev); +}; + +struct exar8250 { + unsigned int nr; + struct exar8250_board *board; + void __iomem *virt; + int line[]; +}; + +static void exar_pm(struct uart_port *port, unsigned int state, unsigned int old) +{ + /* + * Exar UARTs have a SLEEP register that enables or disables each UART + * to enter sleep mode separately. On the XR17V35x the register + * is accessible to each UART at the UART_EXAR_SLEEP offset, but + * the UART channel may only write to the corresponding bit. + */ + serial_port_out(port, UART_EXAR_SLEEP, state ? 0xff : 0); +} + +/* + * XR17V35x UARTs have an extra fractional divisor register (DLD) + * Calculate divisor with extra 4-bit fractional portion + */ +static unsigned int xr17v35x_get_divisor(struct uart_port *p, unsigned int baud, + unsigned int *frac) +{ + unsigned int quot_16; + + quot_16 = DIV_ROUND_CLOSEST(p->uartclk, baud); + *frac = quot_16 & 0x0f; + + return quot_16 >> 4; +} + +static void xr17v35x_set_divisor(struct uart_port *p, unsigned int baud, + unsigned int quot, unsigned int quot_frac) +{ + serial8250_do_set_divisor(p, baud, quot, quot_frac); + + /* Preserve bits not related to baudrate; DLD[7:4]. */ + quot_frac |= serial_port_in(p, 0x2) & 0xf0; + serial_port_out(p, 0x2, quot_frac); +} + +static int xr17v35x_startup(struct uart_port *port) +{ + /* + * First enable access to IER [7:5], ISR [5:4], FCR [5:4], + * MCR [7:5] and MSR [7:0] + */ + serial_port_out(port, UART_XR_EFR, UART_EFR_ECB); + + /* + * Make sure all interrups are masked until initialization is + * complete and the FIFOs are cleared + */ + serial_port_out(port, UART_IER, 0); + + return serial8250_do_startup(port); +} + +static void exar_shutdown(struct uart_port *port) +{ + unsigned char lsr; + bool tx_complete = false; + struct uart_8250_port *up = up_to_u8250p(port); + struct circ_buf *xmit = &port->state->xmit; + int i = 0; + + do { + lsr = serial_in(up, UART_LSR); + if (lsr & (UART_LSR_TEMT | UART_LSR_THRE)) + tx_complete = true; + else + tx_complete = false; + usleep_range(1000, 1100); + } while (!uart_circ_empty(xmit) && !tx_complete && i++ < 1000); + + serial8250_do_shutdown(port); +} + +static int default_setup(struct exar8250 *priv, struct pci_dev *pcidev, + int idx, unsigned int offset, + struct uart_8250_port *port) +{ + const struct exar8250_board *board = priv->board; + unsigned int bar = 0; + unsigned char status; + + port->port.iotype = UPIO_MEM; + port->port.mapbase = pci_resource_start(pcidev, bar) + offset; + port->port.membase = priv->virt + offset; + port->port.regshift = board->reg_shift; + + /* + * XR17V35x UARTs have an extra divisor register, DLD that gets enabled + * with when DLAB is set which will cause the device to incorrectly match + * and assign port type to PORT_16650. The EFR for this UART is found + * at offset 0x09. Instead check the Deice ID (DVID) register + * for a 2, 4 or 8 port UART. + */ + status = readb(port->port.membase + UART_EXAR_DVID); + if (status == 0x82 || status == 0x84 || status == 0x88) { + port->port.type = PORT_XR17V35X; + + port->port.get_divisor = xr17v35x_get_divisor; + port->port.set_divisor = xr17v35x_set_divisor; + + port->port.startup = xr17v35x_startup; + } else { + port->port.type = PORT_XR17D15X; + } + + port->port.pm = exar_pm; + port->port.shutdown = exar_shutdown; + + return 0; +} + +static int +pci_fastcom335_setup(struct exar8250 *priv, struct pci_dev *pcidev, + struct uart_8250_port *port, int idx) +{ + unsigned int offset = idx * 0x200; + unsigned int baud = 1843200; + u8 __iomem *p; + int err; + + port->port.uartclk = baud * 16; + + err = default_setup(priv, pcidev, idx, offset, port); + if (err) + return err; + + p = port->port.membase; + + writeb(0x00, p + UART_EXAR_8XMODE); + writeb(UART_FCTR_EXAR_TRGD, p + UART_EXAR_FCTR); + writeb(32, p + UART_EXAR_TXTRG); + writeb(32, p + UART_EXAR_RXTRG); + + /* + * Setup Multipurpose Input/Output pins. + */ + if (idx == 0) { + switch (pcidev->device) { + case PCI_DEVICE_ID_COMMTECH_4222PCI335: + case PCI_DEVICE_ID_COMMTECH_4224PCI335: + writeb(0x78, p + UART_EXAR_MPIOLVL_7_0); + writeb(0x00, p + UART_EXAR_MPIOINV_7_0); + writeb(0x00, p + UART_EXAR_MPIOSEL_7_0); + break; + case PCI_DEVICE_ID_COMMTECH_2324PCI335: + case PCI_DEVICE_ID_COMMTECH_2328PCI335: + writeb(0x00, p + UART_EXAR_MPIOLVL_7_0); + writeb(0xc0, p + UART_EXAR_MPIOINV_7_0); + writeb(0xc0, p + UART_EXAR_MPIOSEL_7_0); + break; + } + writeb(0x00, p + UART_EXAR_MPIOINT_7_0); + writeb(0x00, p + UART_EXAR_MPIO3T_7_0); + writeb(0x00, p + UART_EXAR_MPIOOD_7_0); + } + + return 0; +} + +static int +pci_connect_tech_setup(struct exar8250 *priv, struct pci_dev *pcidev, + struct uart_8250_port *port, int idx) +{ + unsigned int offset = idx * 0x200; + unsigned int baud = 1843200; + + port->port.uartclk = baud * 16; + return default_setup(priv, pcidev, idx, offset, port); +} + +static int +pci_xr17c154_setup(struct exar8250 *priv, struct pci_dev *pcidev, + struct uart_8250_port *port, int idx) +{ + unsigned int offset = idx * 0x200; + unsigned int baud = 921600; + + port->port.uartclk = baud * 16; + return default_setup(priv, pcidev, idx, offset, port); +} + +static void setup_gpio(struct pci_dev *pcidev, u8 __iomem *p) +{ + /* + * The Commtech adapters required the MPIOs to be driven low. The Exar + * devices will export them as GPIOs, so we pre-configure them safely + * as inputs. + */ + + u8 dir = 0x00; + + if ((pcidev->vendor == PCI_VENDOR_ID_EXAR) && + (pcidev->subsystem_vendor != PCI_VENDOR_ID_SEALEVEL)) { + // Configure GPIO as inputs for Commtech adapters + dir = 0xff; + } else { + // Configure GPIO as outputs for SeaLevel adapters + dir = 0x00; + } + + writeb(0x00, p + UART_EXAR_MPIOINT_7_0); + writeb(0x00, p + UART_EXAR_MPIOLVL_7_0); + writeb(0x00, p + UART_EXAR_MPIO3T_7_0); + writeb(0x00, p + UART_EXAR_MPIOINV_7_0); + writeb(dir, p + UART_EXAR_MPIOSEL_7_0); + writeb(0x00, p + UART_EXAR_MPIOOD_7_0); + writeb(0x00, p + UART_EXAR_MPIOINT_15_8); + writeb(0x00, p + UART_EXAR_MPIOLVL_15_8); + writeb(0x00, p + UART_EXAR_MPIO3T_15_8); + writeb(0x00, p + UART_EXAR_MPIOINV_15_8); + writeb(dir, p + UART_EXAR_MPIOSEL_15_8); + writeb(0x00, p + UART_EXAR_MPIOOD_15_8); +} + +static void * +__xr17v35x_register_gpio(struct pci_dev *pcidev, + const struct property_entry *properties) +{ + struct platform_device *pdev; + + pdev = platform_device_alloc("gpio_exar", PLATFORM_DEVID_AUTO); + if (!pdev) + return NULL; + + pdev->dev.parent = &pcidev->dev; + ACPI_COMPANION_SET(&pdev->dev, ACPI_COMPANION(&pcidev->dev)); + + if (platform_device_add_properties(pdev, properties) < 0 || + platform_device_add(pdev) < 0) { + platform_device_put(pdev); + return NULL; + } + + return pdev; +} + +static const struct property_entry exar_gpio_properties[] = { + PROPERTY_ENTRY_U32("exar,first-pin", 0), + PROPERTY_ENTRY_U32("ngpios", 16), + { } +}; + +static int xr17v35x_register_gpio(struct pci_dev *pcidev, + struct uart_8250_port *port) +{ + if (pcidev->vendor == PCI_VENDOR_ID_EXAR) + port->port.private_data = + __xr17v35x_register_gpio(pcidev, exar_gpio_properties); + + return 0; +} + +static int generic_rs485_config(struct uart_port *port, + struct serial_rs485 *rs485) +{ + bool is_rs485 = !!(rs485->flags & SER_RS485_ENABLED); + u8 __iomem *p = port->membase; + u8 value; + + value = readb(p + UART_EXAR_FCTR); + if (is_rs485) + value |= UART_FCTR_EXAR_485; + else + value &= ~UART_FCTR_EXAR_485; + + writeb(value, p + UART_EXAR_FCTR); + + if (is_rs485) + writeb(UART_EXAR_RS485_DLY(4), p + UART_MSR); + + port->rs485 = *rs485; + + return 0; +} + +static const struct exar8250_platform exar8250_default_platform = { + .register_gpio = xr17v35x_register_gpio, + .rs485_config = generic_rs485_config, +}; + +static int iot2040_rs485_config(struct uart_port *port, + struct serial_rs485 *rs485) +{ + bool is_rs485 = !!(rs485->flags & SER_RS485_ENABLED); + u8 __iomem *p = port->membase; + u8 mask = IOT2040_UART1_MASK; + u8 mode, value; + + if (is_rs485) { + if (rs485->flags & SER_RS485_RX_DURING_TX) + mode = IOT2040_UART_MODE_RS422; + else + mode = IOT2040_UART_MODE_RS485; + + if (rs485->flags & SER_RS485_TERMINATE_BUS) + mode |= IOT2040_UART_TERMINATE_BUS; + } else { + mode = IOT2040_UART_MODE_RS232; + } + + if (port->line == 3) { + mask <<= IOT2040_UART2_SHIFT; + mode <<= IOT2040_UART2_SHIFT; + } + + value = readb(p + UART_EXAR_MPIOLVL_7_0); + value &= ~mask; + value |= mode; + writeb(value, p + UART_EXAR_MPIOLVL_7_0); + + return generic_rs485_config(port, rs485); +} + +static const struct property_entry iot2040_gpio_properties[] = { + PROPERTY_ENTRY_U32("exar,first-pin", 10), + PROPERTY_ENTRY_U32("ngpios", 1), + { } +}; + +static int iot2040_register_gpio(struct pci_dev *pcidev, + struct uart_8250_port *port) +{ + u8 __iomem *p = port->port.membase; + + writeb(IOT2040_UARTS_DEFAULT_MODE, p + UART_EXAR_MPIOLVL_7_0); + writeb(IOT2040_UARTS_GPIO_LO_MODE, p + UART_EXAR_MPIOSEL_7_0); + writeb(IOT2040_UARTS_ENABLE, p + UART_EXAR_MPIOLVL_15_8); + writeb(IOT2040_UARTS_GPIO_HI_MODE, p + UART_EXAR_MPIOSEL_15_8); + + port->port.private_data = + __xr17v35x_register_gpio(pcidev, iot2040_gpio_properties); + + return 0; +} + +static const struct exar8250_platform iot2040_platform = { + .rs485_config = iot2040_rs485_config, + .register_gpio = iot2040_register_gpio, +}; + +/* + * For SIMATIC IOT2000, only IOT2040 and its variants have the Exar device, + * IOT2020 doesn't have. Therefore it is sufficient to match on the common + * board name after the device was found. + */ +static const struct dmi_system_id exar_platforms[] = { + { + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"), + }, + .driver_data = (void *)&iot2040_platform, + }, + {} +}; + +static int +pci_xr17v35x_setup(struct exar8250 *priv, struct pci_dev *pcidev, + struct uart_8250_port *port, int idx) +{ + const struct exar8250_platform *platform; + const struct dmi_system_id *dmi_match; + unsigned int offset = idx * 0x400; + unsigned int baud = 7812500; + u8 __iomem *p; + int ret; + + dmi_match = dmi_first_match(exar_platforms); + if (dmi_match) + platform = dmi_match->driver_data; + else + platform = &exar8250_default_platform; + + port->port.uartclk = baud * 16; + port->port.rs485_config = platform->rs485_config; + + /* + * Setup the UART clock for the devices on expansion slot to + * half the clock speed of the main chip (which is 125MHz) + */ + if (idx >= 8) + port->port.uartclk /= 2; + + ret = default_setup(priv, pcidev, idx, offset, port); + if (ret) + return ret; + + p = port->port.membase; + + writeb(0x00, p + UART_EXAR_8XMODE); + writeb(UART_FCTR_EXAR_TRGD, p + UART_EXAR_FCTR); + writeb(128, p + UART_EXAR_TXTRG); + writeb(128, p + UART_EXAR_RXTRG); + + if (idx == 0) { + /* Setup Multipurpose Input/Output pins. */ + setup_gpio(pcidev, p); + + ret = platform->register_gpio(pcidev, port); + } + + return ret; +} + +static void pci_xr17v35x_exit(struct pci_dev *pcidev) +{ + struct exar8250 *priv = pci_get_drvdata(pcidev); + struct uart_8250_port *port = serial8250_get_port(priv->line[0]); + struct platform_device *pdev = port->port.private_data; + + platform_device_unregister(pdev); + port->port.private_data = NULL; +} + +static inline void exar_misc_clear(struct exar8250 *priv) +{ + /* Clear all PCI interrupts by reading INT0. No effect on IIR */ + readb(priv->virt + UART_EXAR_INT0); + + /* Clear INT0 for Expansion Interface slave ports, too */ + if (priv->board->num_ports > 8) + readb(priv->virt + 0x2000 + UART_EXAR_INT0); +} + +/* + * These Exar UARTs have an extra interrupt indicator that could fire for a + * few interrupts that are not presented/cleared through IIR. One of which is + * a wakeup interrupt when coming out of sleep. These interrupts are only + * cleared by reading global INT0 or INT1 registers as interrupts are + * associated with channel 0. The INT[3:0] registers _are_ accessible from each + * channel's address space, but for the sake of bus efficiency we register a + * dedicated handler at the PCI device level to handle them. + */ +static irqreturn_t exar_misc_handler(int irq, void *data) +{ + exar_misc_clear(data); + + return IRQ_HANDLED; +} + +static int +exar_pci_probe(struct pci_dev *pcidev, const struct pci_device_id *ent) +{ + unsigned int nr_ports, i, bar = 0, maxnr; + struct exar8250_board *board; + struct uart_8250_port uart; + struct exar8250 *priv; + int rc; + + board = (struct exar8250_board *)ent->driver_data; + if (!board) + return -EINVAL; + + rc = pcim_enable_device(pcidev); + if (rc) + return rc; + + maxnr = pci_resource_len(pcidev, bar) >> (board->reg_shift + 3); + + if (pcidev->vendor == PCI_VENDOR_ID_ACCESSIO) + nr_ports = BIT(((pcidev->device & 0x38) >> 3) - 1); + else if (board->num_ports) + nr_ports = board->num_ports; + else if (pcidev->vendor == PCI_VENDOR_ID_SEALEVEL) + nr_ports = pcidev->device & 0xff; + else + nr_ports = pcidev->device & 0x0f; + + priv = devm_kzalloc(&pcidev->dev, struct_size(priv, line, nr_ports), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->board = board; + priv->virt = pcim_iomap(pcidev, bar, 0); + if (!priv->virt) + return -ENOMEM; + + pci_set_master(pcidev); + + rc = pci_alloc_irq_vectors(pcidev, 1, 1, PCI_IRQ_ALL_TYPES); + if (rc < 0) + return rc; + + memset(&uart, 0, sizeof(uart)); + uart.port.flags = UPF_SHARE_IRQ | UPF_EXAR_EFR | UPF_FIXED_TYPE | UPF_FIXED_PORT; + uart.port.irq = pci_irq_vector(pcidev, 0); + uart.port.dev = &pcidev->dev; + + rc = devm_request_irq(&pcidev->dev, uart.port.irq, exar_misc_handler, + IRQF_SHARED, "exar_uart", priv); + if (rc) + return rc; + + /* Clear interrupts */ + exar_misc_clear(priv); + + for (i = 0; i < nr_ports && i < maxnr; i++) { + rc = board->setup(priv, pcidev, &uart, i); + if (rc) { + dev_err(&pcidev->dev, "Failed to setup port %u\n", i); + break; + } + + dev_dbg(&pcidev->dev, "Setup PCI port: port %lx, irq %d, type %d\n", + uart.port.iobase, uart.port.irq, uart.port.iotype); + + priv->line[i] = serial8250_register_8250_port(&uart); + if (priv->line[i] < 0) { + dev_err(&pcidev->dev, + "Couldn't register serial port %lx, irq %d, type %d, error %d\n", + uart.port.iobase, uart.port.irq, + uart.port.iotype, priv->line[i]); + break; + } + } + priv->nr = i; + pci_set_drvdata(pcidev, priv); + return 0; +} + +static void exar_pci_remove(struct pci_dev *pcidev) +{ + struct exar8250 *priv = pci_get_drvdata(pcidev); + unsigned int i; + + for (i = 0; i < priv->nr; i++) + serial8250_unregister_port(priv->line[i]); + + if (priv->board->exit) + priv->board->exit(pcidev); +} + +static int __maybe_unused exar_suspend(struct device *dev) +{ + struct pci_dev *pcidev = to_pci_dev(dev); + struct exar8250 *priv = pci_get_drvdata(pcidev); + unsigned int i; + + for (i = 0; i < priv->nr; i++) + if (priv->line[i] >= 0) + serial8250_suspend_port(priv->line[i]); + + /* Ensure that every init quirk is properly torn down */ + if (priv->board->exit) + priv->board->exit(pcidev); + + return 0; +} + +static int __maybe_unused exar_resume(struct device *dev) +{ + struct exar8250 *priv = dev_get_drvdata(dev); + unsigned int i; + + exar_misc_clear(priv); + + for (i = 0; i < priv->nr; i++) + if (priv->line[i] >= 0) + serial8250_resume_port(priv->line[i]); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(exar_pci_pm, exar_suspend, exar_resume); + +static const struct exar8250_board pbn_fastcom335_2 = { + .num_ports = 2, + .setup = pci_fastcom335_setup, +}; + +static const struct exar8250_board pbn_fastcom335_4 = { + .num_ports = 4, + .setup = pci_fastcom335_setup, +}; + +static const struct exar8250_board pbn_fastcom335_8 = { + .num_ports = 8, + .setup = pci_fastcom335_setup, +}; + +static const struct exar8250_board pbn_connect = { + .setup = pci_connect_tech_setup, +}; + +static const struct exar8250_board pbn_exar_ibm_saturn = { + .num_ports = 1, + .setup = pci_xr17c154_setup, +}; + +static const struct exar8250_board pbn_exar_XR17C15x = { + .setup = pci_xr17c154_setup, +}; + +static const struct exar8250_board pbn_exar_XR17V35x = { + .setup = pci_xr17v35x_setup, + .exit = pci_xr17v35x_exit, +}; + +static const struct exar8250_board pbn_fastcom35x_2 = { + .num_ports = 2, + .setup = pci_xr17v35x_setup, + .exit = pci_xr17v35x_exit, +}; + +static const struct exar8250_board pbn_fastcom35x_4 = { + .num_ports = 4, + .setup = pci_xr17v35x_setup, + .exit = pci_xr17v35x_exit, +}; + +static const struct exar8250_board pbn_fastcom35x_8 = { + .num_ports = 8, + .setup = pci_xr17v35x_setup, + .exit = pci_xr17v35x_exit, +}; + +static const struct exar8250_board pbn_exar_XR17V4358 = { + .num_ports = 12, + .setup = pci_xr17v35x_setup, + .exit = pci_xr17v35x_exit, +}; + +static const struct exar8250_board pbn_exar_XR17V8358 = { + .num_ports = 16, + .setup = pci_xr17v35x_setup, + .exit = pci_xr17v35x_exit, +}; + +#define CONNECT_DEVICE(devid, sdevid, bd) { \ + PCI_DEVICE_SUB( \ + PCI_VENDOR_ID_EXAR, \ + PCI_DEVICE_ID_EXAR_##devid, \ + PCI_SUBVENDOR_ID_CONNECT_TECH, \ + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_##sdevid), 0, 0, \ + (kernel_ulong_t)&bd \ + } + +#define EXAR_DEVICE(vend, devid, bd) { PCI_DEVICE_DATA(vend, devid, &bd) } + +#define IBM_DEVICE(devid, sdevid, bd) { \ + PCI_DEVICE_SUB( \ + PCI_VENDOR_ID_EXAR, \ + PCI_DEVICE_ID_EXAR_##devid, \ + PCI_VENDOR_ID_IBM, \ + PCI_SUBDEVICE_ID_IBM_##sdevid), 0, 0, \ + (kernel_ulong_t)&bd \ + } + +#define USR_DEVICE(devid, sdevid, bd) { \ + PCI_DEVICE_SUB( \ + PCI_VENDOR_ID_USR, \ + PCI_DEVICE_ID_EXAR_##devid, \ + PCI_VENDOR_ID_EXAR, \ + PCI_SUBDEVICE_ID_USR_##sdevid), 0, 0, \ + (kernel_ulong_t)&bd \ + } + +static const struct pci_device_id exar_pci_tbl[] = { + EXAR_DEVICE(ACCESSIO, COM_2S, pbn_exar_XR17C15x), + EXAR_DEVICE(ACCESSIO, COM_4S, pbn_exar_XR17C15x), + EXAR_DEVICE(ACCESSIO, COM_8S, pbn_exar_XR17C15x), + EXAR_DEVICE(ACCESSIO, COM232_8, pbn_exar_XR17C15x), + EXAR_DEVICE(ACCESSIO, COM_2SM, pbn_exar_XR17C15x), + EXAR_DEVICE(ACCESSIO, COM_4SM, pbn_exar_XR17C15x), + EXAR_DEVICE(ACCESSIO, COM_8SM, pbn_exar_XR17C15x), + + CONNECT_DEVICE(XR17C152, UART_2_232, pbn_connect), + CONNECT_DEVICE(XR17C154, UART_4_232, pbn_connect), + CONNECT_DEVICE(XR17C158, UART_8_232, pbn_connect), + CONNECT_DEVICE(XR17C152, UART_1_1, pbn_connect), + CONNECT_DEVICE(XR17C154, UART_2_2, pbn_connect), + CONNECT_DEVICE(XR17C158, UART_4_4, pbn_connect), + CONNECT_DEVICE(XR17C152, UART_2, pbn_connect), + CONNECT_DEVICE(XR17C154, UART_4, pbn_connect), + CONNECT_DEVICE(XR17C158, UART_8, pbn_connect), + CONNECT_DEVICE(XR17C152, UART_2_485, pbn_connect), + CONNECT_DEVICE(XR17C154, UART_4_485, pbn_connect), + CONNECT_DEVICE(XR17C158, UART_8_485, pbn_connect), + + IBM_DEVICE(XR17C152, SATURN_SERIAL_ONE_PORT, pbn_exar_ibm_saturn), + + /* USRobotics USR298x-OEM PCI Modems */ + USR_DEVICE(XR17C152, 2980, pbn_exar_XR17C15x), + USR_DEVICE(XR17C152, 2981, pbn_exar_XR17C15x), + + /* Exar Corp. XR17C15[248] Dual/Quad/Octal UART */ + EXAR_DEVICE(EXAR, XR17C152, pbn_exar_XR17C15x), + EXAR_DEVICE(EXAR, XR17C154, pbn_exar_XR17C15x), + EXAR_DEVICE(EXAR, XR17C158, pbn_exar_XR17C15x), + + /* Exar Corp. XR17V[48]35[248] Dual/Quad/Octal/Hexa PCIe UARTs */ + EXAR_DEVICE(EXAR, XR17V352, pbn_exar_XR17V35x), + EXAR_DEVICE(EXAR, XR17V354, pbn_exar_XR17V35x), + EXAR_DEVICE(EXAR, XR17V358, pbn_exar_XR17V35x), + EXAR_DEVICE(EXAR, XR17V4358, pbn_exar_XR17V4358), + EXAR_DEVICE(EXAR, XR17V8358, pbn_exar_XR17V8358), + EXAR_DEVICE(COMMTECH, 4222PCIE, pbn_fastcom35x_2), + EXAR_DEVICE(COMMTECH, 4224PCIE, pbn_fastcom35x_4), + EXAR_DEVICE(COMMTECH, 4228PCIE, pbn_fastcom35x_8), + + EXAR_DEVICE(COMMTECH, 4222PCI335, pbn_fastcom335_2), + EXAR_DEVICE(COMMTECH, 4224PCI335, pbn_fastcom335_4), + EXAR_DEVICE(COMMTECH, 2324PCI335, pbn_fastcom335_4), + EXAR_DEVICE(COMMTECH, 2328PCI335, pbn_fastcom335_8), + + EXAR_DEVICE(SEALEVEL, 710xC, pbn_exar_XR17V35x), + EXAR_DEVICE(SEALEVEL, 720xC, pbn_exar_XR17V35x), + EXAR_DEVICE(SEALEVEL, 740xC, pbn_exar_XR17V35x), + EXAR_DEVICE(SEALEVEL, 780xC, pbn_exar_XR17V35x), + EXAR_DEVICE(SEALEVEL, 716xC, pbn_exar_XR17V35x), + { 0, } +}; +MODULE_DEVICE_TABLE(pci, exar_pci_tbl); + +static struct pci_driver exar_pci_driver = { + .name = "exar_serial", + .probe = exar_pci_probe, + .remove = exar_pci_remove, + .driver = { + .pm = &exar_pci_pm, + }, + .id_table = exar_pci_tbl, +}; +module_pci_driver(exar_pci_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Exar Serial Driver"); +MODULE_AUTHOR("Sudip Mukherjee "); diff --git a/drivers/tty/serial/8250/8250_exar_st16c554.c b/drivers/tty/serial/8250/8250_exar_st16c554.c new file mode 100644 index 000000000..933811ebf --- /dev/null +++ b/drivers/tty/serial/8250/8250_exar_st16c554.c @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Written by Paul B Schroeder < pschroeder "at" uplogix "dot" com > + * Based on 8250_boca. + * + * Copyright (C) 2005 Russell King. + * Data taken from include/asm-i386/serial.h + */ +#include +#include +#include + +#include "8250.h" + +static struct plat_serial8250_port exar_data[] = { + SERIAL8250_PORT(0x100, 5), + SERIAL8250_PORT(0x108, 5), + SERIAL8250_PORT(0x110, 5), + SERIAL8250_PORT(0x118, 5), + { }, +}; + +static struct platform_device exar_device = { + .name = "serial8250", + .id = PLAT8250_DEV_EXAR_ST16C554, + .dev = { + .platform_data = exar_data, + }, +}; + +static int __init exar_init(void) +{ + return platform_device_register(&exar_device); +} + +module_init(exar_init); + +MODULE_AUTHOR("Paul B Schroeder"); +MODULE_DESCRIPTION("8250 serial probe module for Exar cards"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250/8250_fintek.c b/drivers/tty/serial/8250/8250_fintek.c new file mode 100644 index 000000000..dba5950b8 --- /dev/null +++ b/drivers/tty/serial/8250/8250_fintek.c @@ -0,0 +1,463 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Probe for F81216A LPC to 4 UART + * + * Copyright (C) 2014-2016 Ricardo Ribalda, Qtechnology A/S + */ +#include +#include +#include +#include +#include +#include +#include "8250.h" + +#define ADDR_PORT 0 +#define DATA_PORT 1 +#define EXIT_KEY 0xAA +#define CHIP_ID1 0x20 +#define CHIP_ID2 0x21 +#define CHIP_ID_F81865 0x0407 +#define CHIP_ID_F81866 0x1010 +#define CHIP_ID_F81966 0x0215 +#define CHIP_ID_F81216AD 0x1602 +#define CHIP_ID_F81216H 0x0501 +#define CHIP_ID_F81216 0x0802 +#define VENDOR_ID1 0x23 +#define VENDOR_ID1_VAL 0x19 +#define VENDOR_ID2 0x24 +#define VENDOR_ID2_VAL 0x34 +#define IO_ADDR1 0x61 +#define IO_ADDR2 0x60 +#define LDN 0x7 + +#define FINTEK_IRQ_MODE 0x70 +#define IRQ_SHARE BIT(4) +#define IRQ_MODE_MASK (BIT(6) | BIT(5)) +#define IRQ_LEVEL_LOW 0 +#define IRQ_EDGE_HIGH BIT(5) + +/* + * F81216H clock source register, the value and mask is the same with F81866, + * but it's on F0h. + * + * Clock speeds for UART (register F0h) + * 00: 1.8432MHz. + * 01: 18.432MHz. + * 10: 24MHz. + * 11: 14.769MHz. + */ +#define RS485 0xF0 +#define RTS_INVERT BIT(5) +#define RS485_URA BIT(4) +#define RXW4C_IRA BIT(3) +#define TXW4C_IRA BIT(2) + +#define FIFO_CTRL 0xF6 +#define FIFO_MODE_MASK (BIT(1) | BIT(0)) +#define FIFO_MODE_128 (BIT(1) | BIT(0)) +#define RXFTHR_MODE_MASK (BIT(5) | BIT(4)) +#define RXFTHR_MODE_4X BIT(5) + +#define F81216_LDN_LOW 0x0 +#define F81216_LDN_HIGH 0x4 + +/* + * F81866/966 registers + * + * The IRQ setting mode of F81866/966 is not the same with F81216 series. + * Level/Low: IRQ_MODE0:0, IRQ_MODE1:0 + * Edge/High: IRQ_MODE0:1, IRQ_MODE1:0 + * + * Clock speeds for UART (register F2h) + * 00: 1.8432MHz. + * 01: 18.432MHz. + * 10: 24MHz. + * 11: 14.769MHz. + */ +#define F81866_IRQ_MODE 0xf0 +#define F81866_IRQ_SHARE BIT(0) +#define F81866_IRQ_MODE0 BIT(1) + +#define F81866_FIFO_CTRL FIFO_CTRL +#define F81866_IRQ_MODE1 BIT(3) + +#define F81866_LDN_LOW 0x10 +#define F81866_LDN_HIGH 0x16 + +#define F81866_UART_CLK 0xF2 +#define F81866_UART_CLK_MASK (BIT(1) | BIT(0)) +#define F81866_UART_CLK_1_8432MHZ 0 +#define F81866_UART_CLK_14_769MHZ (BIT(1) | BIT(0)) +#define F81866_UART_CLK_18_432MHZ BIT(0) +#define F81866_UART_CLK_24MHZ BIT(1) + +struct fintek_8250 { + u16 pid; + u16 base_port; + u8 index; + u8 key; +}; + +static u8 sio_read_reg(struct fintek_8250 *pdata, u8 reg) +{ + outb(reg, pdata->base_port + ADDR_PORT); + return inb(pdata->base_port + DATA_PORT); +} + +static void sio_write_reg(struct fintek_8250 *pdata, u8 reg, u8 data) +{ + outb(reg, pdata->base_port + ADDR_PORT); + outb(data, pdata->base_port + DATA_PORT); +} + +static void sio_write_mask_reg(struct fintek_8250 *pdata, u8 reg, u8 mask, + u8 data) +{ + u8 tmp; + + tmp = (sio_read_reg(pdata, reg) & ~mask) | (mask & data); + sio_write_reg(pdata, reg, tmp); +} + +static int fintek_8250_enter_key(u16 base_port, u8 key) +{ + if (!request_muxed_region(base_port, 2, "8250_fintek")) + return -EBUSY; + + /* Force to deactive all SuperIO in this base_port */ + outb(EXIT_KEY, base_port + ADDR_PORT); + + outb(key, base_port + ADDR_PORT); + outb(key, base_port + ADDR_PORT); + return 0; +} + +static void fintek_8250_exit_key(u16 base_port) +{ + + outb(EXIT_KEY, base_port + ADDR_PORT); + release_region(base_port + ADDR_PORT, 2); +} + +static int fintek_8250_check_id(struct fintek_8250 *pdata) +{ + u16 chip; + + if (sio_read_reg(pdata, VENDOR_ID1) != VENDOR_ID1_VAL) + return -ENODEV; + + if (sio_read_reg(pdata, VENDOR_ID2) != VENDOR_ID2_VAL) + return -ENODEV; + + chip = sio_read_reg(pdata, CHIP_ID1); + chip |= sio_read_reg(pdata, CHIP_ID2) << 8; + + switch (chip) { + case CHIP_ID_F81865: + case CHIP_ID_F81866: + case CHIP_ID_F81966: + case CHIP_ID_F81216AD: + case CHIP_ID_F81216H: + case CHIP_ID_F81216: + break; + default: + return -ENODEV; + } + + pdata->pid = chip; + return 0; +} + +static int fintek_8250_get_ldn_range(struct fintek_8250 *pdata, int *min, + int *max) +{ + switch (pdata->pid) { + case CHIP_ID_F81966: + case CHIP_ID_F81865: + case CHIP_ID_F81866: + *min = F81866_LDN_LOW; + *max = F81866_LDN_HIGH; + return 0; + + case CHIP_ID_F81216AD: + case CHIP_ID_F81216H: + case CHIP_ID_F81216: + *min = F81216_LDN_LOW; + *max = F81216_LDN_HIGH; + return 0; + } + + return -ENODEV; +} + +static int fintek_8250_rs485_config(struct uart_port *port, + struct serial_rs485 *rs485) +{ + uint8_t config = 0; + struct fintek_8250 *pdata = port->private_data; + + if (!pdata) + return -EINVAL; + + + if (rs485->flags & SER_RS485_ENABLED) { + /* Hardware do not support same RTS level on send and receive */ + if (!(rs485->flags & SER_RS485_RTS_ON_SEND) == + !(rs485->flags & SER_RS485_RTS_AFTER_SEND)) + return -EINVAL; + memset(rs485->padding, 0, sizeof(rs485->padding)); + config |= RS485_URA; + } else { + memset(rs485, 0, sizeof(*rs485)); + } + + rs485->flags &= SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | + SER_RS485_RTS_AFTER_SEND; + + /* Only the first port supports delays */ + if (pdata->index) { + rs485->delay_rts_before_send = 0; + rs485->delay_rts_after_send = 0; + } + + if (rs485->delay_rts_before_send) { + rs485->delay_rts_before_send = 1; + config |= TXW4C_IRA; + } + + if (rs485->delay_rts_after_send) { + rs485->delay_rts_after_send = 1; + config |= RXW4C_IRA; + } + + if (rs485->flags & SER_RS485_RTS_ON_SEND) + config |= RTS_INVERT; + + if (fintek_8250_enter_key(pdata->base_port, pdata->key)) + return -EBUSY; + + sio_write_reg(pdata, LDN, pdata->index); + sio_write_reg(pdata, RS485, config); + fintek_8250_exit_key(pdata->base_port); + + port->rs485 = *rs485; + + return 0; +} + +static void fintek_8250_set_irq_mode(struct fintek_8250 *pdata, bool is_level) +{ + sio_write_reg(pdata, LDN, pdata->index); + + switch (pdata->pid) { + case CHIP_ID_F81966: + case CHIP_ID_F81866: + sio_write_mask_reg(pdata, F81866_FIFO_CTRL, F81866_IRQ_MODE1, + 0); + fallthrough; + case CHIP_ID_F81865: + sio_write_mask_reg(pdata, F81866_IRQ_MODE, F81866_IRQ_SHARE, + F81866_IRQ_SHARE); + sio_write_mask_reg(pdata, F81866_IRQ_MODE, F81866_IRQ_MODE0, + is_level ? 0 : F81866_IRQ_MODE0); + break; + + case CHIP_ID_F81216AD: + case CHIP_ID_F81216H: + case CHIP_ID_F81216: + sio_write_mask_reg(pdata, FINTEK_IRQ_MODE, IRQ_SHARE, + IRQ_SHARE); + sio_write_mask_reg(pdata, FINTEK_IRQ_MODE, IRQ_MODE_MASK, + is_level ? IRQ_LEVEL_LOW : IRQ_EDGE_HIGH); + break; + } +} + +static void fintek_8250_set_max_fifo(struct fintek_8250 *pdata) +{ + switch (pdata->pid) { + case CHIP_ID_F81216H: /* 128Bytes FIFO */ + case CHIP_ID_F81966: + case CHIP_ID_F81866: + sio_write_mask_reg(pdata, FIFO_CTRL, + FIFO_MODE_MASK | RXFTHR_MODE_MASK, + FIFO_MODE_128 | RXFTHR_MODE_4X); + break; + + default: /* Default 16Bytes FIFO */ + break; + } +} + +static void fintek_8250_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + struct fintek_8250 *pdata = port->private_data; + unsigned int baud = tty_termios_baud_rate(termios); + int i; + u8 reg; + static u32 baudrate_table[] = {115200, 921600, 1152000, 1500000}; + static u8 clock_table[] = { F81866_UART_CLK_1_8432MHZ, + F81866_UART_CLK_14_769MHZ, F81866_UART_CLK_18_432MHZ, + F81866_UART_CLK_24MHZ }; + + /* + * We'll use serial8250_do_set_termios() for baud = 0, otherwise It'll + * crash on baudrate_table[i] % baud with "division by zero". + */ + if (!baud) + goto exit; + + switch (pdata->pid) { + case CHIP_ID_F81216H: + reg = RS485; + break; + case CHIP_ID_F81966: + case CHIP_ID_F81866: + reg = F81866_UART_CLK; + break; + default: + /* Don't change clocksource with unknown PID */ + dev_warn(port->dev, + "%s: pid: %x Not support. use default set_termios.\n", + __func__, pdata->pid); + goto exit; + } + + for (i = 0; i < ARRAY_SIZE(baudrate_table); ++i) { + if (baud > baudrate_table[i] || baudrate_table[i] % baud != 0) + continue; + + if (port->uartclk == baudrate_table[i] * 16) + break; + + if (fintek_8250_enter_key(pdata->base_port, pdata->key)) + continue; + + port->uartclk = baudrate_table[i] * 16; + + sio_write_reg(pdata, LDN, pdata->index); + sio_write_mask_reg(pdata, reg, F81866_UART_CLK_MASK, + clock_table[i]); + + fintek_8250_exit_key(pdata->base_port); + break; + } + + if (i == ARRAY_SIZE(baudrate_table)) { + baud = tty_termios_baud_rate(old); + tty_termios_encode_baud_rate(termios, baud, baud); + } + +exit: + serial8250_do_set_termios(port, termios, old); +} + +static void fintek_8250_set_termios_handler(struct uart_8250_port *uart) +{ + struct fintek_8250 *pdata = uart->port.private_data; + + switch (pdata->pid) { + case CHIP_ID_F81216H: + case CHIP_ID_F81966: + case CHIP_ID_F81866: + uart->port.set_termios = fintek_8250_set_termios; + break; + + default: + break; + } +} + +static int probe_setup_port(struct fintek_8250 *pdata, + struct uart_8250_port *uart) +{ + static const u16 addr[] = {0x4e, 0x2e}; + static const u8 keys[] = {0x77, 0xa0, 0x87, 0x67}; + struct irq_data *irq_data; + bool level_mode = false; + int i, j, k, min, max; + + for (i = 0; i < ARRAY_SIZE(addr); i++) { + for (j = 0; j < ARRAY_SIZE(keys); j++) { + pdata->base_port = addr[i]; + pdata->key = keys[j]; + + if (fintek_8250_enter_key(addr[i], keys[j])) + continue; + if (fintek_8250_check_id(pdata) || + fintek_8250_get_ldn_range(pdata, &min, &max)) { + fintek_8250_exit_key(addr[i]); + continue; + } + + for (k = min; k < max; k++) { + u16 aux; + + sio_write_reg(pdata, LDN, k); + aux = sio_read_reg(pdata, IO_ADDR1); + aux |= sio_read_reg(pdata, IO_ADDR2) << 8; + if (aux != uart->port.iobase) + continue; + + pdata->index = k; + + irq_data = irq_get_irq_data(uart->port.irq); + if (irq_data) + level_mode = + irqd_is_level_type(irq_data); + + fintek_8250_set_irq_mode(pdata, level_mode); + fintek_8250_set_max_fifo(pdata); + + fintek_8250_exit_key(addr[i]); + + return 0; + } + + fintek_8250_exit_key(addr[i]); + } + } + + return -ENODEV; +} + +static void fintek_8250_set_rs485_handler(struct uart_8250_port *uart) +{ + struct fintek_8250 *pdata = uart->port.private_data; + + switch (pdata->pid) { + case CHIP_ID_F81216AD: + case CHIP_ID_F81216H: + case CHIP_ID_F81966: + case CHIP_ID_F81866: + case CHIP_ID_F81865: + uart->port.rs485_config = fintek_8250_rs485_config; + break; + + default: /* No RS485 Auto direction functional */ + break; + } +} + +int fintek_8250_probe(struct uart_8250_port *uart) +{ + struct fintek_8250 *pdata; + struct fintek_8250 probe_data; + + if (probe_setup_port(&probe_data, uart)) + return -ENODEV; + + pdata = devm_kzalloc(uart->port.dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + memcpy(pdata, &probe_data, sizeof(probe_data)); + uart->port.private_data = pdata; + fintek_8250_set_rs485_handler(uart); + fintek_8250_set_termios_handler(uart); + + return 0; +} diff --git a/drivers/tty/serial/8250/8250_fourport.c b/drivers/tty/serial/8250/8250_fourport.c new file mode 100644 index 000000000..3215b9b7a --- /dev/null +++ b/drivers/tty/serial/8250/8250_fourport.c @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2005 Russell King. + * Data taken from include/asm-i386/serial.h + */ +#include +#include +#include + +#include "8250.h" + +#define SERIAL8250_FOURPORT(_base, _irq) \ + SERIAL8250_PORT_FLAGS(_base, _irq, UPF_FOURPORT) + +static struct plat_serial8250_port fourport_data[] = { + SERIAL8250_FOURPORT(0x1a0, 9), + SERIAL8250_FOURPORT(0x1a8, 9), + SERIAL8250_FOURPORT(0x1b0, 9), + SERIAL8250_FOURPORT(0x1b8, 9), + SERIAL8250_FOURPORT(0x2a0, 5), + SERIAL8250_FOURPORT(0x2a8, 5), + SERIAL8250_FOURPORT(0x2b0, 5), + SERIAL8250_FOURPORT(0x2b8, 5), + { }, +}; + +static struct platform_device fourport_device = { + .name = "serial8250", + .id = PLAT8250_DEV_FOURPORT, + .dev = { + .platform_data = fourport_data, + }, +}; + +static int __init fourport_init(void) +{ + return platform_device_register(&fourport_device); +} + +module_init(fourport_init); + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("8250 serial probe module for AST Fourport cards"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250/8250_fsl.c b/drivers/tty/serial/8250/8250_fsl.c new file mode 100644 index 000000000..fbcc90c31 --- /dev/null +++ b/drivers/tty/serial/8250/8250_fsl.c @@ -0,0 +1,175 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Freescale 16550 UART "driver", Copyright (C) 2011 Paul Gortmaker. + * Copyright 2020 NXP + * Copyright 2020 Puresoftware Ltd. + * + * This isn't a full driver; it just provides an alternate IRQ + * handler to deal with an errata and provide ACPI wrapper. + * Everything else is just using the bog standard 8250 support. + * + * We follow code flow of serial8250_default_handle_irq() but add + * a check for a break and insert a dummy read on the Rx for the + * immediately following IRQ event. + * + * We re-use the already existing "bug handling" lsr_saved_flags + * field to carry the "what we just did" information from the one + * IRQ event to the next one. + */ + +#include +#include +#include + +#include "8250.h" + +struct fsl8250_data { + int line; +}; + +int fsl8250_handle_irq(struct uart_port *port) +{ + unsigned char lsr, orig_lsr; + unsigned long flags; + unsigned int iir; + struct uart_8250_port *up = up_to_u8250p(port); + + spin_lock_irqsave(&up->port.lock, flags); + + iir = port->serial_in(port, UART_IIR); + if (iir & UART_IIR_NO_INT) { + spin_unlock_irqrestore(&up->port.lock, flags); + return 0; + } + + /* This is the WAR; if last event was BRK, then read and return */ + if (unlikely(up->lsr_saved_flags & UART_LSR_BI)) { + up->lsr_saved_flags &= ~UART_LSR_BI; + port->serial_in(port, UART_RX); + spin_unlock_irqrestore(&up->port.lock, flags); + return 1; + } + + lsr = orig_lsr = up->port.serial_in(&up->port, UART_LSR); + + /* Process incoming characters first */ + if ((lsr & (UART_LSR_DR | UART_LSR_BI)) && + (up->ier & (UART_IER_RLSI | UART_IER_RDI))) { + lsr = serial8250_rx_chars(up, lsr); + } + + /* Stop processing interrupts on input overrun */ + if ((orig_lsr & UART_LSR_OE) && (up->overrun_backoff_time_ms > 0)) { + unsigned long delay; + + up->ier = port->serial_in(port, UART_IER); + if (up->ier & (UART_IER_RLSI | UART_IER_RDI)) { + port->ops->stop_rx(port); + } else { + /* Keep restarting the timer until + * the input overrun subsides. + */ + cancel_delayed_work(&up->overrun_backoff); + } + + delay = msecs_to_jiffies(up->overrun_backoff_time_ms); + schedule_delayed_work(&up->overrun_backoff, delay); + } + + serial8250_modem_status(up); + + if ((lsr & UART_LSR_THRE) && (up->ier & UART_IER_THRI)) + serial8250_tx_chars(up); + + up->lsr_saved_flags = orig_lsr; + uart_unlock_and_check_sysrq(&up->port, flags); + return 1; +} +EXPORT_SYMBOL_GPL(fsl8250_handle_irq); + +#ifdef CONFIG_ACPI +static int fsl8250_acpi_probe(struct platform_device *pdev) +{ + struct fsl8250_data *data; + struct uart_8250_port port8250; + struct device *dev = &pdev->dev; + struct resource *regs; + + int ret, irq; + + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!regs) { + dev_err(dev, "no registers defined\n"); + return -EINVAL; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + if (irq != -EPROBE_DEFER) + dev_err(dev, "cannot get irq\n"); + return irq; + } + + memset(&port8250, 0, sizeof(port8250)); + + ret = device_property_read_u32(dev, "clock-frequency", + &port8250.port.uartclk); + if (ret) + return ret; + + spin_lock_init(&port8250.port.lock); + + port8250.port.mapbase = regs->start; + port8250.port.irq = irq; + port8250.port.handle_irq = fsl8250_handle_irq; + port8250.port.type = PORT_16550A; + port8250.port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF + | UPF_FIXED_PORT | UPF_IOREMAP + | UPF_FIXED_TYPE; + port8250.port.dev = dev; + port8250.port.mapsize = resource_size(regs); + port8250.port.iotype = UPIO_MEM; + port8250.port.irqflags = IRQF_SHARED; + + port8250.port.membase = devm_ioremap(dev, port8250.port.mapbase, + port8250.port.mapsize); + if (!port8250.port.membase) + return -ENOMEM; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->line = serial8250_register_8250_port(&port8250); + if (data->line < 0) + return data->line; + + platform_set_drvdata(pdev, data); + return 0; +} + +static int fsl8250_acpi_remove(struct platform_device *pdev) +{ + struct fsl8250_data *data = platform_get_drvdata(pdev); + + serial8250_unregister_port(data->line); + return 0; +} + +static const struct acpi_device_id fsl_8250_acpi_id[] = { + { "NXP0018", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(acpi, fsl_8250_acpi_id); + +static struct platform_driver fsl8250_platform_driver = { + .driver = { + .name = "fsl-16550-uart", + .acpi_match_table = ACPI_PTR(fsl_8250_acpi_id), + }, + .probe = fsl8250_acpi_probe, + .remove = fsl8250_acpi_remove, +}; + +module_platform_driver(fsl8250_platform_driver); +#endif diff --git a/drivers/tty/serial/8250/8250_gsc.c b/drivers/tty/serial/8250/8250_gsc.c new file mode 100644 index 000000000..948d0a1c6 --- /dev/null +++ b/drivers/tty/serial/8250/8250_gsc.c @@ -0,0 +1,130 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Serial Device Initialisation for Lasi/Asp/Wax/Dino + * + * (c) Copyright Matthew Wilcox 2001-2002 + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "8250.h" + +static int __init serial_init_chip(struct parisc_device *dev) +{ + struct uart_8250_port uart; + unsigned long address; + int err; + +#if defined(CONFIG_64BIT) && defined(CONFIG_IOSAPIC) + if (!dev->irq && (dev->id.sversion == 0xad)) + dev->irq = iosapic_serial_irq(dev); +#endif + + if (!dev->irq) { + /* We find some unattached serial ports by walking native + * busses. These should be silently ignored. Otherwise, + * what we have here is a missing parent device, so tell + * the user what they're missing. + */ + if (parisc_parent(dev)->id.hw_type != HPHW_IOA) + dev_info(&dev->dev, + "Serial: device 0x%llx not configured.\n" + "Enable support for Wax, Lasi, Asp or Dino.\n", + (unsigned long long)dev->hpa.start); + return -ENODEV; + } + + address = dev->hpa.start; + if (dev->id.sversion != 0x8d) + address += 0x800; + + memset(&uart, 0, sizeof(uart)); + uart.port.iotype = UPIO_MEM; + /* 7.272727MHz on Lasi. Assumed the same for Dino, Wax and Timi. */ + uart.port.uartclk = (dev->id.sversion != 0xad) ? + 7272727 : 1843200; + uart.port.mapbase = address; + uart.port.membase = ioremap(address, 16); + if (!uart.port.membase) { + dev_warn(&dev->dev, "Failed to map memory\n"); + return -ENOMEM; + } + uart.port.irq = dev->irq; + uart.port.flags = UPF_BOOT_AUTOCONF; + uart.port.dev = &dev->dev; + + err = serial8250_register_8250_port(&uart); + if (err < 0) { + dev_warn(&dev->dev, + "serial8250_register_8250_port returned error %d\n", + err); + iounmap(uart.port.membase); + return err; + } + + return 0; +} + +static const struct parisc_device_id serial_tbl[] __initconst = { + { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00075 }, + { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008c }, + { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008d }, + { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x000ad }, + { 0 } +}; + +/* Hack. Some machines have SERIAL_0 attached to Lasi and SERIAL_1 + * attached to Dino. Unfortunately, Dino appears before Lasi in the device + * tree. To ensure that ttyS0 == SERIAL_0, we register two drivers; one + * which only knows about Lasi and then a second which will find all the + * other serial ports. HPUX ignores this problem. + */ +static const struct parisc_device_id lasi_tbl[] __initconst = { + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03B, 0x0008C }, /* C1xx/C1xxL */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03C, 0x0008C }, /* B132L */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03D, 0x0008C }, /* B160L */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03E, 0x0008C }, /* B132L+ */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03F, 0x0008C }, /* B180L+ */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x046, 0x0008C }, /* Rocky2 120 */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x047, 0x0008C }, /* Rocky2 150 */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x04E, 0x0008C }, /* Kiji L2 132 */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x056, 0x0008C }, /* Raven+ */ + { 0 } +}; + + +MODULE_DEVICE_TABLE(parisc, serial_tbl); + +static struct parisc_driver lasi_driver __refdata = { + .name = "serial_1", + .id_table = lasi_tbl, + .probe = serial_init_chip, +}; + +static struct parisc_driver serial_driver __refdata = { + .name = "serial", + .id_table = serial_tbl, + .probe = serial_init_chip, +}; + +static int __init probe_serial_gsc(void) +{ + register_parisc_driver(&lasi_driver); + register_parisc_driver(&serial_driver); + return 0; +} + +module_init(probe_serial_gsc); + +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250/8250_hp300.c b/drivers/tty/serial/8250/8250_hp300.c new file mode 100644 index 000000000..3012ea03d --- /dev/null +++ b/drivers/tty/serial/8250/8250_hp300.c @@ -0,0 +1,324 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for the 98626/98644/internal serial interface on hp300/hp400 + * (based on the National Semiconductor INS8250/NS16550AF/WD16C552 UARTs) + * + * Ported from 2.2 and modified to use the normal 8250 driver + * by Kars de Jong , May 2004. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "8250.h" + +#if !defined(CONFIG_HPDCA) && !defined(CONFIG_HPAPCI) && !defined(CONFIG_COMPILE_TEST) +#warning CONFIG_SERIAL_8250 defined but neither CONFIG_HPDCA nor CONFIG_HPAPCI defined, are you sure? +#endif + +#ifdef CONFIG_HPAPCI +struct hp300_port { + struct hp300_port *next; /* next port */ + int line; /* line (tty) number */ +}; + +static struct hp300_port *hp300_ports; +#endif + +#ifdef CONFIG_HPDCA + +static int hpdca_init_one(struct dio_dev *d, + const struct dio_device_id *ent); +static void hpdca_remove_one(struct dio_dev *d); + +static struct dio_device_id hpdca_dio_tbl[] = { + { DIO_ID_DCA0 }, + { DIO_ID_DCA0REM }, + { DIO_ID_DCA1 }, + { DIO_ID_DCA1REM }, + { 0 } +}; + +static struct dio_driver hpdca_driver = { + .name = "hpdca", + .id_table = hpdca_dio_tbl, + .probe = hpdca_init_one, + .remove = hpdca_remove_one, +}; + +#endif + +static unsigned int num_ports; + +extern int hp300_uart_scode; + +/* Offset to UART registers from base of DCA */ +#define UART_OFFSET 17 + +#define DCA_ID 0x01 /* ID (read), reset (write) */ +#define DCA_IC 0x03 /* Interrupt control */ + +/* Interrupt control */ +#define DCA_IC_IE 0x80 /* Master interrupt enable */ + +#define HPDCA_BAUD_BASE 153600 + +/* Base address of the Frodo part */ +#define FRODO_BASE (0x41c000) + +/* + * Where we find the 8250-like APCI ports, and how far apart they are. + */ +#define FRODO_APCIBASE 0x0 +#define FRODO_APCISPACE 0x20 +#define FRODO_APCI_OFFSET(x) (FRODO_APCIBASE + ((x) * FRODO_APCISPACE)) + +#define HPAPCI_BAUD_BASE 500400 + +#ifdef CONFIG_SERIAL_8250_CONSOLE +/* + * Parse the bootinfo to find descriptions for headless console and + * debug serial ports and register them with the 8250 driver. + */ +int __init hp300_setup_serial_console(void) +{ + int scode; + struct uart_port port; + + memset(&port, 0, sizeof(port)); + + if (hp300_uart_scode < 0 || hp300_uart_scode > DIO_SCMAX) + return 0; + + if (DIO_SCINHOLE(hp300_uart_scode)) + return 0; + + scode = hp300_uart_scode; + + /* Memory mapped I/O */ + port.iotype = UPIO_MEM; + port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF; + port.type = PORT_UNKNOWN; + + /* Check for APCI console */ + if (scode == 256) { +#ifdef CONFIG_HPAPCI + pr_info("Serial console is HP APCI 1\n"); + + port.uartclk = HPAPCI_BAUD_BASE * 16; + port.mapbase = (FRODO_BASE + FRODO_APCI_OFFSET(1)); + port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE); + port.regshift = 2; + add_preferred_console("ttyS", port.line, "9600n8"); +#else + pr_warn("Serial console is APCI but support is disabled (CONFIG_HPAPCI)!\n"); + return 0; +#endif + } else { +#ifdef CONFIG_HPDCA + unsigned long pa = dio_scodetophysaddr(scode); + if (!pa) + return 0; + + pr_info("Serial console is HP DCA at select code %d\n", scode); + + port.uartclk = HPDCA_BAUD_BASE * 16; + port.mapbase = (pa + UART_OFFSET); + port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE); + port.regshift = 1; + port.irq = DIO_IPL(pa + DIO_VIRADDRBASE); + + /* Enable board-interrupts */ + out_8(pa + DIO_VIRADDRBASE + DCA_IC, DCA_IC_IE); + + if (DIO_ID(pa + DIO_VIRADDRBASE) & 0x80) + add_preferred_console("ttyS", port.line, "9600n8"); +#else + pr_warn("Serial console is DCA but support is disabled (CONFIG_HPDCA)!\n"); + return 0; +#endif + } + + if (early_serial_setup(&port) < 0) + pr_warn("%s: early_serial_setup() failed.\n", __func__); + return 0; +} +#endif /* CONFIG_SERIAL_8250_CONSOLE */ + +#ifdef CONFIG_HPDCA +static int hpdca_init_one(struct dio_dev *d, + const struct dio_device_id *ent) +{ + struct uart_8250_port uart; + int line; + +#ifdef CONFIG_SERIAL_8250_CONSOLE + if (hp300_uart_scode == d->scode) { + /* Already got it. */ + return 0; + } +#endif + memset(&uart, 0, sizeof(uart)); + + /* Memory mapped I/O */ + uart.port.iotype = UPIO_MEM; + uart.port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF; + uart.port.irq = d->ipl; + uart.port.uartclk = HPDCA_BAUD_BASE * 16; + uart.port.mapbase = (d->resource.start + UART_OFFSET); + uart.port.membase = (char *)(uart.port.mapbase + DIO_VIRADDRBASE); + uart.port.regshift = 1; + uart.port.dev = &d->dev; + line = serial8250_register_8250_port(&uart); + + if (line < 0) { + dev_notice(&d->dev, + "8250_hp300: register_serial() DCA scode %d irq %d failed\n", + d->scode, uart.port.irq); + return -ENOMEM; + } + + /* Enable board-interrupts */ + out_8(d->resource.start + DIO_VIRADDRBASE + DCA_IC, DCA_IC_IE); + dio_set_drvdata(d, (void *)line); + + /* Reset the DCA */ + out_8(d->resource.start + DIO_VIRADDRBASE + DCA_ID, 0xff); + udelay(100); + + num_ports++; + + return 0; +} +#endif + +static int __init hp300_8250_init(void) +{ + static int called; +#ifdef CONFIG_HPAPCI + int line; + unsigned long base; + struct uart_8250_port uart; + struct hp300_port *port; + int i; +#endif + if (called) + return -ENODEV; + called = 1; + + if (!MACH_IS_HP300) + return -ENODEV; + +#ifdef CONFIG_HPDCA + dio_register_driver(&hpdca_driver); +#endif +#ifdef CONFIG_HPAPCI + if (hp300_model < HP_400) { + if (!num_ports) + return -ENODEV; + return 0; + } + /* These models have the Frodo chip. + * Port 0 is reserved for the Apollo Domain keyboard. + * Port 1 is either the console or the DCA. + */ + for (i = 1; i < 4; i++) { + /* Port 1 is the console on a 425e, on other machines it's + * mapped to DCA. + */ +#ifdef CONFIG_SERIAL_8250_CONSOLE + if (i == 1) + continue; +#endif + + /* Create new serial device */ + port = kmalloc(sizeof(struct hp300_port), GFP_KERNEL); + if (!port) + return -ENOMEM; + + memset(&uart, 0, sizeof(uart)); + + base = (FRODO_BASE + FRODO_APCI_OFFSET(i)); + + /* Memory mapped I/O */ + uart.port.iotype = UPIO_MEM; + uart.port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ + | UPF_BOOT_AUTOCONF; + /* XXX - no interrupt support yet */ + uart.port.irq = 0; + uart.port.uartclk = HPAPCI_BAUD_BASE * 16; + uart.port.mapbase = base; + uart.port.membase = (char *)(base + DIO_VIRADDRBASE); + uart.port.regshift = 2; + + line = serial8250_register_8250_port(&uart); + + if (line < 0) { + dev_notice(uart.port.dev, + "8250_hp300: register_serial() APCI %d irq %d failed\n", + i, uart.port.irq); + kfree(port); + continue; + } + + port->line = line; + port->next = hp300_ports; + hp300_ports = port; + + num_ports++; + } +#endif + + /* Any boards found? */ + if (!num_ports) + return -ENODEV; + + return 0; +} + +#ifdef CONFIG_HPDCA +static void hpdca_remove_one(struct dio_dev *d) +{ + int line; + + line = (int) dio_get_drvdata(d); + if (d->resource.start) { + /* Disable board-interrupts */ + out_8(d->resource.start + DIO_VIRADDRBASE + DCA_IC, 0); + } + serial8250_unregister_port(line); +} +#endif + +static void __exit hp300_8250_exit(void) +{ +#ifdef CONFIG_HPAPCI + struct hp300_port *port, *to_free; + + for (port = hp300_ports; port; ) { + serial8250_unregister_port(port->line); + to_free = port; + port = port->next; + kfree(to_free); + } + + hp300_ports = NULL; +#endif +#ifdef CONFIG_HPDCA + dio_unregister_driver(&hpdca_driver); +#endif +} + +module_init(hp300_8250_init); +module_exit(hp300_8250_exit); +MODULE_DESCRIPTION("HP DCA/APCI serial driver"); +MODULE_AUTHOR("Kars de Jong "); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250/8250_hub6.c b/drivers/tty/serial/8250/8250_hub6.c new file mode 100644 index 000000000..273f59b9b --- /dev/null +++ b/drivers/tty/serial/8250/8250_hub6.c @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2005 Russell King. + * Data taken from include/asm-i386/serial.h + */ +#include +#include +#include + +#define HUB6(card, port) \ + { \ + .iobase = 0x302, \ + .irq = 3, \ + .uartclk = 1843200, \ + .iotype = UPIO_HUB6, \ + .flags = UPF_BOOT_AUTOCONF, \ + .hub6 = (card) << 6 | (port) << 3 | 1, \ + } + +static struct plat_serial8250_port hub6_data[] = { + HUB6(0, 0), + HUB6(0, 1), + HUB6(0, 2), + HUB6(0, 3), + HUB6(0, 4), + HUB6(0, 5), + HUB6(1, 0), + HUB6(1, 1), + HUB6(1, 2), + HUB6(1, 3), + HUB6(1, 4), + HUB6(1, 5), + { }, +}; + +static struct platform_device hub6_device = { + .name = "serial8250", + .id = PLAT8250_DEV_HUB6, + .dev = { + .platform_data = hub6_data, + }, +}; + +static int __init hub6_init(void) +{ + return platform_device_register(&hub6_device); +} + +module_init(hub6_init); + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("8250 serial probe module for Hub6 cards"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c new file mode 100644 index 000000000..988bf6bcc --- /dev/null +++ b/drivers/tty/serial/8250/8250_ingenic.c @@ -0,0 +1,355 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2010 Lars-Peter Clausen + * Copyright (C) 2015 Imagination Technologies + * + * Ingenic SoC UART support + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "8250.h" + +/** ingenic_uart_config: SOC specific config data. */ +struct ingenic_uart_config { + int tx_loadsz; + int fifosize; +}; + +struct ingenic_uart_data { + struct clk *clk_module; + struct clk *clk_baud; + int line; +}; + +static const struct of_device_id of_match[]; + +#define UART_FCR_UME BIT(4) + +#define UART_MCR_MDCE BIT(7) +#define UART_MCR_FCM BIT(6) + +static struct earlycon_device *early_device; + +static uint8_t early_in(struct uart_port *port, int offset) +{ + return readl(port->membase + (offset << 2)); +} + +static void early_out(struct uart_port *port, int offset, uint8_t value) +{ + writel(value, port->membase + (offset << 2)); +} + +static void ingenic_early_console_putc(struct uart_port *port, int c) +{ + uint8_t lsr; + + do { + lsr = early_in(port, UART_LSR); + } while ((lsr & UART_LSR_TEMT) == 0); + + early_out(port, UART_TX, c); +} + +static void ingenic_early_console_write(struct console *console, + const char *s, unsigned int count) +{ + uart_console_write(&early_device->port, s, count, + ingenic_early_console_putc); +} + +static void __init ingenic_early_console_setup_clock(struct earlycon_device *dev) +{ + void *fdt = initial_boot_params; + const __be32 *prop; + int offset; + + offset = fdt_path_offset(fdt, "/ext"); + if (offset < 0) + return; + + prop = fdt_getprop(fdt, offset, "clock-frequency", NULL); + if (!prop) + return; + + dev->port.uartclk = be32_to_cpup(prop); +} + +static int __init ingenic_early_console_setup(struct earlycon_device *dev, + const char *opt) +{ + struct uart_port *port = &dev->port; + unsigned int divisor; + int baud = 115200; + + if (!dev->port.membase) + return -ENODEV; + + if (opt) { + unsigned int parity, bits, flow; /* unused for now */ + + uart_parse_options(opt, &baud, &parity, &bits, &flow); + } + + ingenic_early_console_setup_clock(dev); + + if (dev->baud) + baud = dev->baud; + divisor = DIV_ROUND_CLOSEST(port->uartclk, 16 * baud); + + early_out(port, UART_IER, 0); + early_out(port, UART_LCR, UART_LCR_DLAB | UART_LCR_WLEN8); + early_out(port, UART_DLL, 0); + early_out(port, UART_DLM, 0); + early_out(port, UART_LCR, UART_LCR_WLEN8); + early_out(port, UART_FCR, UART_FCR_UME | UART_FCR_CLEAR_XMIT | + UART_FCR_CLEAR_RCVR | UART_FCR_ENABLE_FIFO); + early_out(port, UART_MCR, UART_MCR_RTS | UART_MCR_DTR); + + early_out(port, UART_LCR, UART_LCR_DLAB | UART_LCR_WLEN8); + early_out(port, UART_DLL, divisor & 0xff); + early_out(port, UART_DLM, (divisor >> 8) & 0xff); + early_out(port, UART_LCR, UART_LCR_WLEN8); + + early_device = dev; + dev->con->write = ingenic_early_console_write; + + return 0; +} + +OF_EARLYCON_DECLARE(jz4740_uart, "ingenic,jz4740-uart", + ingenic_early_console_setup); + +OF_EARLYCON_DECLARE(jz4770_uart, "ingenic,jz4770-uart", + ingenic_early_console_setup); + +OF_EARLYCON_DECLARE(jz4775_uart, "ingenic,jz4775-uart", + ingenic_early_console_setup); + +OF_EARLYCON_DECLARE(jz4780_uart, "ingenic,jz4780-uart", + ingenic_early_console_setup); + +OF_EARLYCON_DECLARE(x1000_uart, "ingenic,x1000-uart", + ingenic_early_console_setup); + +static void ingenic_uart_serial_out(struct uart_port *p, int offset, int value) +{ + int ier; + + switch (offset) { + case UART_FCR: + /* UART module enable */ + value |= UART_FCR_UME; + break; + + case UART_IER: + /* + * Enable receive timeout interrupt with the receive line + * status interrupt. + */ + value |= (value & 0x4) << 2; + break; + + case UART_MCR: + /* + * If we have enabled modem status IRQs we should enable + * modem mode. + */ + ier = p->serial_in(p, UART_IER); + + if (ier & UART_IER_MSI) + value |= UART_MCR_MDCE | UART_MCR_FCM; + else + value &= ~(UART_MCR_MDCE | UART_MCR_FCM); + break; + + default: + break; + } + + writeb(value, p->membase + (offset << p->regshift)); +} + +static unsigned int ingenic_uart_serial_in(struct uart_port *p, int offset) +{ + unsigned int value; + + value = readb(p->membase + (offset << p->regshift)); + + /* Hide non-16550 compliant bits from higher levels */ + switch (offset) { + case UART_FCR: + value &= ~UART_FCR_UME; + break; + + case UART_MCR: + value &= ~(UART_MCR_MDCE | UART_MCR_FCM); + break; + + default: + break; + } + return value; +} + +static int ingenic_uart_probe(struct platform_device *pdev) +{ + struct uart_8250_port uart = {}; + struct ingenic_uart_data *data; + const struct ingenic_uart_config *cdata; + const struct of_device_id *match; + struct resource *regs; + int irq, err, line; + + match = of_match_device(of_match, &pdev->dev); + if (!match) { + dev_err(&pdev->dev, "Error: No device match found\n"); + return -ENODEV; + } + cdata = match->data; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!regs) { + dev_err(&pdev->dev, "no registers defined\n"); + return -EINVAL; + } + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + spin_lock_init(&uart.port.lock); + uart.port.type = PORT_16550A; + uart.port.flags = UPF_SKIP_TEST | UPF_IOREMAP | UPF_FIXED_TYPE; + uart.port.iotype = UPIO_MEM; + uart.port.mapbase = regs->start; + uart.port.regshift = 2; + uart.port.serial_out = ingenic_uart_serial_out; + uart.port.serial_in = ingenic_uart_serial_in; + uart.port.irq = irq; + uart.port.dev = &pdev->dev; + uart.port.fifosize = cdata->fifosize; + uart.tx_loadsz = cdata->tx_loadsz; + uart.capabilities = UART_CAP_FIFO | UART_CAP_RTOIE; + + /* Check for a fixed line number */ + line = of_alias_get_id(pdev->dev.of_node, "serial"); + if (line >= 0) + uart.port.line = line; + + uart.port.membase = devm_ioremap(&pdev->dev, regs->start, + resource_size(regs)); + if (!uart.port.membase) + return -ENOMEM; + + data->clk_module = devm_clk_get(&pdev->dev, "module"); + if (IS_ERR(data->clk_module)) + return dev_err_probe(&pdev->dev, PTR_ERR(data->clk_module), + "unable to get module clock\n"); + + data->clk_baud = devm_clk_get(&pdev->dev, "baud"); + if (IS_ERR(data->clk_baud)) + return dev_err_probe(&pdev->dev, PTR_ERR(data->clk_baud), + "unable to get baud clock\n"); + + err = clk_prepare_enable(data->clk_module); + if (err) { + dev_err(&pdev->dev, "could not enable module clock: %d\n", err); + goto out; + } + + err = clk_prepare_enable(data->clk_baud); + if (err) { + dev_err(&pdev->dev, "could not enable baud clock: %d\n", err); + goto out_disable_moduleclk; + } + uart.port.uartclk = clk_get_rate(data->clk_baud); + + data->line = serial8250_register_8250_port(&uart); + if (data->line < 0) { + err = data->line; + goto out_disable_baudclk; + } + + platform_set_drvdata(pdev, data); + return 0; + +out_disable_baudclk: + clk_disable_unprepare(data->clk_baud); +out_disable_moduleclk: + clk_disable_unprepare(data->clk_module); +out: + return err; +} + +static int ingenic_uart_remove(struct platform_device *pdev) +{ + struct ingenic_uart_data *data = platform_get_drvdata(pdev); + + serial8250_unregister_port(data->line); + clk_disable_unprepare(data->clk_module); + clk_disable_unprepare(data->clk_baud); + return 0; +} + +static const struct ingenic_uart_config jz4740_uart_config = { + .tx_loadsz = 8, + .fifosize = 16, +}; + +static const struct ingenic_uart_config jz4760_uart_config = { + .tx_loadsz = 16, + .fifosize = 32, +}; + +static const struct ingenic_uart_config jz4780_uart_config = { + .tx_loadsz = 32, + .fifosize = 64, +}; + +static const struct ingenic_uart_config x1000_uart_config = { + .tx_loadsz = 32, + .fifosize = 64, +}; + +static const struct of_device_id of_match[] = { + { .compatible = "ingenic,jz4740-uart", .data = &jz4740_uart_config }, + { .compatible = "ingenic,jz4760-uart", .data = &jz4760_uart_config }, + { .compatible = "ingenic,jz4770-uart", .data = &jz4760_uart_config }, + { .compatible = "ingenic,jz4775-uart", .data = &jz4760_uart_config }, + { .compatible = "ingenic,jz4780-uart", .data = &jz4780_uart_config }, + { .compatible = "ingenic,x1000-uart", .data = &x1000_uart_config }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, of_match); + +static struct platform_driver ingenic_uart_platform_driver = { + .driver = { + .name = "ingenic-uart", + .of_match_table = of_match, + }, + .probe = ingenic_uart_probe, + .remove = ingenic_uart_remove, +}; + +module_platform_driver(ingenic_uart_platform_driver); + +MODULE_AUTHOR("Paul Burton"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Ingenic SoC UART driver"); diff --git a/drivers/tty/serial/8250/8250_ioc3.c b/drivers/tty/serial/8250/8250_ioc3.c new file mode 100644 index 000000000..d5a39e105 --- /dev/null +++ b/drivers/tty/serial/8250/8250_ioc3.c @@ -0,0 +1,98 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SGI IOC3 8250 UART driver + * + * Copyright (C) 2019 Thomas Bogendoerfer + * + * based on code Copyright (C) 2005 Stanislaw Skowronek + * Copyright (C) 2014 Joshua Kinard + */ + +#include +#include +#include +#include + +#include "8250.h" + +#define IOC3_UARTCLK (22000000 / 3) + +struct ioc3_8250_data { + int line; +}; + +static unsigned int ioc3_serial_in(struct uart_port *p, int offset) +{ + return readb(p->membase + (offset ^ 3)); +} + +static void ioc3_serial_out(struct uart_port *p, int offset, int value) +{ + writeb(value, p->membase + (offset ^ 3)); +} + +static int serial8250_ioc3_probe(struct platform_device *pdev) +{ + struct ioc3_8250_data *data; + struct uart_8250_port up; + struct resource *r; + void __iomem *membase; + int irq, line; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) + return -ENODEV; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + membase = devm_ioremap(&pdev->dev, r->start, resource_size(r)); + if (!membase) + return -ENOMEM; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + irq = 0; /* no interrupt -> use polling */ + + /* Register serial ports with 8250.c */ + memset(&up, 0, sizeof(struct uart_8250_port)); + up.port.iotype = UPIO_MEM; + up.port.uartclk = IOC3_UARTCLK; + up.port.type = PORT_16550A; + up.port.irq = irq; + up.port.flags = (UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ); + up.port.dev = &pdev->dev; + up.port.membase = membase; + up.port.mapbase = r->start; + up.port.serial_in = ioc3_serial_in; + up.port.serial_out = ioc3_serial_out; + line = serial8250_register_8250_port(&up); + if (line < 0) + return line; + + platform_set_drvdata(pdev, data); + return 0; +} + +static int serial8250_ioc3_remove(struct platform_device *pdev) +{ + struct ioc3_8250_data *data = platform_get_drvdata(pdev); + + serial8250_unregister_port(data->line); + return 0; +} + +static struct platform_driver serial8250_ioc3_driver = { + .probe = serial8250_ioc3_probe, + .remove = serial8250_ioc3_remove, + .driver = { + .name = "ioc3-serial8250", + } +}; + +module_platform_driver(serial8250_ioc3_driver); + +MODULE_AUTHOR("Thomas Bogendoerfer "); +MODULE_DESCRIPTION("SGI IOC3 8250 UART driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250/8250_lpc18xx.c b/drivers/tty/serial/8250/8250_lpc18xx.c new file mode 100644 index 000000000..570e25d6f --- /dev/null +++ b/drivers/tty/serial/8250/8250_lpc18xx.c @@ -0,0 +1,224 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Serial port driver for NXP LPC18xx/43xx UART + * + * Copyright (C) 2015 Joachim Eastwood + * + * Based on 8250_mtk.c: + * Copyright (c) 2014 MundoReader S.L. + * Matthias Brugger + */ + +#include +#include +#include +#include +#include + +#include "8250.h" + +/* Additional LPC18xx/43xx 8250 registers and bits */ +#define LPC18XX_UART_RS485CTRL (0x04c / sizeof(u32)) +#define LPC18XX_UART_RS485CTRL_NMMEN BIT(0) +#define LPC18XX_UART_RS485CTRL_DCTRL BIT(4) +#define LPC18XX_UART_RS485CTRL_OINV BIT(5) +#define LPC18XX_UART_RS485DLY (0x054 / sizeof(u32)) +#define LPC18XX_UART_RS485DLY_MAX 255 + +struct lpc18xx_uart_data { + struct uart_8250_dma dma; + struct clk *clk_uart; + struct clk *clk_reg; + int line; +}; + +static int lpc18xx_rs485_config(struct uart_port *port, + struct serial_rs485 *rs485) +{ + struct uart_8250_port *up = up_to_u8250p(port); + u32 rs485_ctrl_reg = 0; + u32 rs485_dly_reg = 0; + unsigned baud_clk; + + if (rs485->flags & SER_RS485_ENABLED) + memset(rs485->padding, 0, sizeof(rs485->padding)); + else + memset(rs485, 0, sizeof(*rs485)); + + rs485->flags &= SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | + SER_RS485_RTS_AFTER_SEND; + + if (rs485->flags & SER_RS485_ENABLED) { + rs485_ctrl_reg |= LPC18XX_UART_RS485CTRL_NMMEN | + LPC18XX_UART_RS485CTRL_DCTRL; + + if (rs485->flags & SER_RS485_RTS_ON_SEND) { + rs485_ctrl_reg |= LPC18XX_UART_RS485CTRL_OINV; + rs485->flags &= ~SER_RS485_RTS_AFTER_SEND; + } else { + rs485->flags |= SER_RS485_RTS_AFTER_SEND; + } + } + + if (rs485->delay_rts_after_send) { + baud_clk = port->uartclk / up->dl_read(up); + rs485_dly_reg = DIV_ROUND_UP(rs485->delay_rts_after_send + * baud_clk, MSEC_PER_SEC); + + if (rs485_dly_reg > LPC18XX_UART_RS485DLY_MAX) + rs485_dly_reg = LPC18XX_UART_RS485DLY_MAX; + + /* Calculate the resulting delay in ms */ + rs485->delay_rts_after_send = (rs485_dly_reg * MSEC_PER_SEC) + / baud_clk; + } + + /* Delay RTS before send not supported */ + rs485->delay_rts_before_send = 0; + + serial_out(up, LPC18XX_UART_RS485CTRL, rs485_ctrl_reg); + serial_out(up, LPC18XX_UART_RS485DLY, rs485_dly_reg); + + port->rs485 = *rs485; + + return 0; +} + +static void lpc18xx_uart_serial_out(struct uart_port *p, int offset, int value) +{ + /* + * For DMA mode one must ensure that the UART_FCR_DMA_SELECT + * bit is set when FIFO is enabled. Even if DMA is not used + * setting this bit doesn't seem to affect anything. + */ + if (offset == UART_FCR && (value & UART_FCR_ENABLE_FIFO)) + value |= UART_FCR_DMA_SELECT; + + offset = offset << p->regshift; + writel(value, p->membase + offset); +} + +static int lpc18xx_serial_probe(struct platform_device *pdev) +{ + struct lpc18xx_uart_data *data; + struct uart_8250_port uart; + struct resource *res; + int irq, ret; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "memory resource not found"); + return -EINVAL; + } + + memset(&uart, 0, sizeof(uart)); + + uart.port.membase = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); + if (!uart.port.membase) + return -ENOMEM; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->clk_uart = devm_clk_get(&pdev->dev, "uartclk"); + if (IS_ERR(data->clk_uart)) { + dev_err(&pdev->dev, "uart clock not found\n"); + return PTR_ERR(data->clk_uart); + } + + data->clk_reg = devm_clk_get(&pdev->dev, "reg"); + if (IS_ERR(data->clk_reg)) { + dev_err(&pdev->dev, "reg clock not found\n"); + return PTR_ERR(data->clk_reg); + } + + ret = clk_prepare_enable(data->clk_reg); + if (ret) { + dev_err(&pdev->dev, "unable to enable reg clock\n"); + return ret; + } + + ret = clk_prepare_enable(data->clk_uart); + if (ret) { + dev_err(&pdev->dev, "unable to enable uart clock\n"); + goto dis_clk_reg; + } + + ret = of_alias_get_id(pdev->dev.of_node, "serial"); + if (ret >= 0) + uart.port.line = ret; + + data->dma.rx_param = data; + data->dma.tx_param = data; + + spin_lock_init(&uart.port.lock); + uart.port.dev = &pdev->dev; + uart.port.irq = irq; + uart.port.iotype = UPIO_MEM32; + uart.port.mapbase = res->start; + uart.port.regshift = 2; + uart.port.type = PORT_16550A; + uart.port.flags = UPF_FIXED_PORT | UPF_FIXED_TYPE | UPF_SKIP_TEST; + uart.port.uartclk = clk_get_rate(data->clk_uart); + uart.port.private_data = data; + uart.port.rs485_config = lpc18xx_rs485_config; + uart.port.serial_out = lpc18xx_uart_serial_out; + + uart.dma = &data->dma; + uart.dma->rxconf.src_maxburst = 1; + uart.dma->txconf.dst_maxburst = 1; + + ret = serial8250_register_8250_port(&uart); + if (ret < 0) { + dev_err(&pdev->dev, "unable to register 8250 port\n"); + goto dis_uart_clk; + } + + data->line = ret; + platform_set_drvdata(pdev, data); + + return 0; + +dis_uart_clk: + clk_disable_unprepare(data->clk_uart); +dis_clk_reg: + clk_disable_unprepare(data->clk_reg); + return ret; +} + +static int lpc18xx_serial_remove(struct platform_device *pdev) +{ + struct lpc18xx_uart_data *data = platform_get_drvdata(pdev); + + serial8250_unregister_port(data->line); + clk_disable_unprepare(data->clk_uart); + clk_disable_unprepare(data->clk_reg); + + return 0; +} + +static const struct of_device_id lpc18xx_serial_match[] = { + { .compatible = "nxp,lpc1850-uart" }, + { }, +}; +MODULE_DEVICE_TABLE(of, lpc18xx_serial_match); + +static struct platform_driver lpc18xx_serial_driver = { + .probe = lpc18xx_serial_probe, + .remove = lpc18xx_serial_remove, + .driver = { + .name = "lpc18xx-uart", + .of_match_table = lpc18xx_serial_match, + }, +}; +module_platform_driver(lpc18xx_serial_driver); + +MODULE_AUTHOR("Joachim Eastwood "); +MODULE_DESCRIPTION("Serial port driver NXP LPC18xx/43xx devices"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c new file mode 100644 index 000000000..1349c161c --- /dev/null +++ b/drivers/tty/serial/8250/8250_lpss.c @@ -0,0 +1,426 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * 8250_lpss.c - Driver for UART on Intel Braswell and various other Intel SoCs + * + * Copyright (C) 2016 Intel Corporation + * Author: Andy Shevchenko + */ + +#include +#include +#include +#include + +#include +#include + +#include "8250_dwlib.h" + +#define PCI_DEVICE_ID_INTEL_QRK_UARTx 0x0936 + +#define PCI_DEVICE_ID_INTEL_BYT_UART1 0x0f0a +#define PCI_DEVICE_ID_INTEL_BYT_UART2 0x0f0c + +#define PCI_DEVICE_ID_INTEL_BSW_UART1 0x228a +#define PCI_DEVICE_ID_INTEL_BSW_UART2 0x228c + +#define PCI_DEVICE_ID_INTEL_EHL_UART0 0x4b96 +#define PCI_DEVICE_ID_INTEL_EHL_UART1 0x4b97 +#define PCI_DEVICE_ID_INTEL_EHL_UART2 0x4b98 +#define PCI_DEVICE_ID_INTEL_EHL_UART3 0x4b99 +#define PCI_DEVICE_ID_INTEL_EHL_UART4 0x4b9a +#define PCI_DEVICE_ID_INTEL_EHL_UART5 0x4b9b + +#define PCI_DEVICE_ID_INTEL_BDW_UART1 0x9ce3 +#define PCI_DEVICE_ID_INTEL_BDW_UART2 0x9ce4 + +/* Intel LPSS specific registers */ + +#define BYT_PRV_CLK 0x800 +#define BYT_PRV_CLK_EN BIT(0) +#define BYT_PRV_CLK_M_VAL_SHIFT 1 +#define BYT_PRV_CLK_N_VAL_SHIFT 16 +#define BYT_PRV_CLK_UPDATE BIT(31) + +#define BYT_TX_OVF_INT 0x820 +#define BYT_TX_OVF_INT_MASK BIT(1) + +struct lpss8250; + +struct lpss8250_board { + unsigned long freq; + unsigned int base_baud; + int (*setup)(struct lpss8250 *, struct uart_port *p); + void (*exit)(struct lpss8250 *); +}; + +struct lpss8250 { + struct dw8250_port_data data; + struct lpss8250_board *board; + + /* DMA parameters */ + struct dw_dma_chip dma_chip; + struct dw_dma_slave dma_param; + u8 dma_maxburst; +}; + +static inline struct lpss8250 *to_lpss8250(struct dw8250_port_data *data) +{ + return container_of(data, struct lpss8250, data); +} + +static void byt_set_termios(struct uart_port *p, struct ktermios *termios, + struct ktermios *old) +{ + unsigned int baud = tty_termios_baud_rate(termios); + struct lpss8250 *lpss = to_lpss8250(p->private_data); + unsigned long fref = lpss->board->freq, fuart = baud * 16; + unsigned long w = BIT(15) - 1; + unsigned long m, n; + u32 reg; + + /* Gracefully handle the B0 case: fall back to B9600 */ + fuart = fuart ? fuart : 9600 * 16; + + /* Get Fuart closer to Fref */ + fuart *= rounddown_pow_of_two(fref / fuart); + + /* + * For baud rates 0.5M, 1M, 1.5M, 2M, 2.5M, 3M, 3.5M and 4M the + * dividers must be adjusted. + * + * uartclk = (m / n) * 100 MHz, where m <= n + */ + rational_best_approximation(fuart, fref, w, w, &m, &n); + p->uartclk = fuart; + + /* Reset the clock */ + reg = (m << BYT_PRV_CLK_M_VAL_SHIFT) | (n << BYT_PRV_CLK_N_VAL_SHIFT); + writel(reg, p->membase + BYT_PRV_CLK); + reg |= BYT_PRV_CLK_EN | BYT_PRV_CLK_UPDATE; + writel(reg, p->membase + BYT_PRV_CLK); + + p->status &= ~UPSTAT_AUTOCTS; + if (termios->c_cflag & CRTSCTS) + p->status |= UPSTAT_AUTOCTS; + + serial8250_do_set_termios(p, termios, old); +} + +static unsigned int byt_get_mctrl(struct uart_port *port) +{ + unsigned int ret = serial8250_do_get_mctrl(port); + + /* Force DCD and DSR signals to permanently be reported as active */ + ret |= TIOCM_CAR | TIOCM_DSR; + + return ret; +} + +static int byt_serial_setup(struct lpss8250 *lpss, struct uart_port *port) +{ + struct dw_dma_slave *param = &lpss->dma_param; + struct pci_dev *pdev = to_pci_dev(port->dev); + struct pci_dev *dma_dev; + + switch (pdev->device) { + case PCI_DEVICE_ID_INTEL_BYT_UART1: + case PCI_DEVICE_ID_INTEL_BSW_UART1: + case PCI_DEVICE_ID_INTEL_BDW_UART1: + param->src_id = 3; + param->dst_id = 2; + break; + case PCI_DEVICE_ID_INTEL_BYT_UART2: + case PCI_DEVICE_ID_INTEL_BSW_UART2: + case PCI_DEVICE_ID_INTEL_BDW_UART2: + param->src_id = 5; + param->dst_id = 4; + break; + default: + return -EINVAL; + } + + dma_dev = pci_get_slot(pdev->bus, PCI_DEVFN(PCI_SLOT(pdev->devfn), 0)); + + param->dma_dev = &dma_dev->dev; + param->m_master = 0; + param->p_master = 1; + + lpss->dma_maxburst = 16; + + port->set_termios = byt_set_termios; + port->get_mctrl = byt_get_mctrl; + + /* Disable TX counter interrupts */ + writel(BYT_TX_OVF_INT_MASK, port->membase + BYT_TX_OVF_INT); + + return 0; +} + +static void byt_serial_exit(struct lpss8250 *lpss) +{ + struct dw_dma_slave *param = &lpss->dma_param; + + /* Paired with pci_get_slot() in the byt_serial_setup() above */ + put_device(param->dma_dev); +} + +static int ehl_serial_setup(struct lpss8250 *lpss, struct uart_port *port) +{ + return 0; +} + +static void ehl_serial_exit(struct lpss8250 *lpss) +{ + struct uart_8250_port *up = serial8250_get_port(lpss->data.line); + + up->dma = NULL; +} + +#ifdef CONFIG_SERIAL_8250_DMA +static const struct dw_dma_platform_data qrk_serial_dma_pdata = { + .nr_channels = 2, + .chan_allocation_order = CHAN_ALLOCATION_ASCENDING, + .chan_priority = CHAN_PRIORITY_ASCENDING, + .block_size = 4095, + .nr_masters = 1, + .data_width = {4}, + .multi_block = {0}, +}; + +static void qrk_serial_setup_dma(struct lpss8250 *lpss, struct uart_port *port) +{ + struct uart_8250_dma *dma = &lpss->data.dma; + struct dw_dma_chip *chip = &lpss->dma_chip; + struct dw_dma_slave *param = &lpss->dma_param; + struct pci_dev *pdev = to_pci_dev(port->dev); + int ret; + + chip->pdata = &qrk_serial_dma_pdata; + chip->dev = &pdev->dev; + chip->id = pdev->devfn; + chip->irq = pci_irq_vector(pdev, 0); + chip->regs = pci_ioremap_bar(pdev, 1); + if (!chip->regs) + return; + + /* Falling back to PIO mode if DMA probing fails */ + ret = dw_dma_probe(chip); + if (ret) + return; + + pci_try_set_mwi(pdev); + + /* Special DMA address for UART */ + dma->rx_dma_addr = 0xfffff000; + dma->tx_dma_addr = 0xfffff000; + + param->dma_dev = &pdev->dev; + param->src_id = 0; + param->dst_id = 1; + param->hs_polarity = true; + + lpss->dma_maxburst = 8; +} + +static void qrk_serial_exit_dma(struct lpss8250 *lpss) +{ + struct dw_dma_chip *chip = &lpss->dma_chip; + struct dw_dma_slave *param = &lpss->dma_param; + + if (!param->dma_dev) + return; + + dw_dma_remove(chip); + + pci_iounmap(to_pci_dev(chip->dev), chip->regs); +} +#else /* CONFIG_SERIAL_8250_DMA */ +static void qrk_serial_setup_dma(struct lpss8250 *lpss, struct uart_port *port) {} +static void qrk_serial_exit_dma(struct lpss8250 *lpss) {} +#endif /* !CONFIG_SERIAL_8250_DMA */ + +static int qrk_serial_setup(struct lpss8250 *lpss, struct uart_port *port) +{ + qrk_serial_setup_dma(lpss, port); + return 0; +} + +static void qrk_serial_exit(struct lpss8250 *lpss) +{ + qrk_serial_exit_dma(lpss); +} + +static bool lpss8250_dma_filter(struct dma_chan *chan, void *param) +{ + struct dw_dma_slave *dws = param; + + if (dws->dma_dev != chan->device->dev) + return false; + + chan->private = dws; + return true; +} + +static int lpss8250_dma_setup(struct lpss8250 *lpss, struct uart_8250_port *port) +{ + struct uart_8250_dma *dma = &lpss->data.dma; + struct dw_dma_slave *rx_param, *tx_param; + struct device *dev = port->port.dev; + + if (!lpss->dma_param.dma_dev) { + dma = port->dma; + if (dma) + goto out_configuration_only; + + return 0; + } + + rx_param = devm_kzalloc(dev, sizeof(*rx_param), GFP_KERNEL); + if (!rx_param) + return -ENOMEM; + + tx_param = devm_kzalloc(dev, sizeof(*tx_param), GFP_KERNEL); + if (!tx_param) + return -ENOMEM; + + *rx_param = lpss->dma_param; + *tx_param = lpss->dma_param; + + dma->fn = lpss8250_dma_filter; + dma->rx_param = rx_param; + dma->tx_param = tx_param; + + port->dma = dma; + +out_configuration_only: + dma->rxconf.src_maxburst = lpss->dma_maxburst; + dma->txconf.dst_maxburst = lpss->dma_maxburst; + + return 0; +} + +static int lpss8250_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct uart_8250_port uart; + struct lpss8250 *lpss; + int ret; + + ret = pcim_enable_device(pdev); + if (ret) + return ret; + + pci_set_master(pdev); + + lpss = devm_kzalloc(&pdev->dev, sizeof(*lpss), GFP_KERNEL); + if (!lpss) + return -ENOMEM; + + ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES); + if (ret < 0) + return ret; + + lpss->board = (struct lpss8250_board *)id->driver_data; + + memset(&uart, 0, sizeof(struct uart_8250_port)); + + uart.port.dev = &pdev->dev; + uart.port.irq = pci_irq_vector(pdev, 0); + uart.port.private_data = &lpss->data; + uart.port.type = PORT_16550A; + uart.port.iotype = UPIO_MEM; + uart.port.regshift = 2; + uart.port.uartclk = lpss->board->base_baud * 16; + uart.port.flags = UPF_SHARE_IRQ | UPF_FIXED_PORT | UPF_FIXED_TYPE; + uart.capabilities = UART_CAP_FIFO | UART_CAP_AFE; + uart.port.mapbase = pci_resource_start(pdev, 0); + uart.port.membase = pcim_iomap(pdev, 0, 0); + if (!uart.port.membase) + return -ENOMEM; + + ret = lpss->board->setup(lpss, &uart.port); + if (ret) + return ret; + + dw8250_setup_port(&uart.port); + + ret = lpss8250_dma_setup(lpss, &uart); + if (ret) + goto err_exit; + + ret = serial8250_register_8250_port(&uart); + if (ret < 0) + goto err_exit; + + lpss->data.line = ret; + + pci_set_drvdata(pdev, lpss); + return 0; + +err_exit: + lpss->board->exit(lpss); + pci_free_irq_vectors(pdev); + return ret; +} + +static void lpss8250_remove(struct pci_dev *pdev) +{ + struct lpss8250 *lpss = pci_get_drvdata(pdev); + + serial8250_unregister_port(lpss->data.line); + + lpss->board->exit(lpss); + pci_free_irq_vectors(pdev); +} + +static const struct lpss8250_board byt_board = { + .freq = 100000000, + .base_baud = 2764800, + .setup = byt_serial_setup, + .exit = byt_serial_exit, +}; + +static const struct lpss8250_board ehl_board = { + .freq = 200000000, + .base_baud = 12500000, + .setup = ehl_serial_setup, + .exit = ehl_serial_exit, +}; + +static const struct lpss8250_board qrk_board = { + .freq = 44236800, + .base_baud = 2764800, + .setup = qrk_serial_setup, + .exit = qrk_serial_exit, +}; + +static const struct pci_device_id pci_ids[] = { + { PCI_DEVICE_DATA(INTEL, QRK_UARTx, &qrk_board) }, + { PCI_DEVICE_DATA(INTEL, EHL_UART0, &ehl_board) }, + { PCI_DEVICE_DATA(INTEL, EHL_UART1, &ehl_board) }, + { PCI_DEVICE_DATA(INTEL, EHL_UART2, &ehl_board) }, + { PCI_DEVICE_DATA(INTEL, EHL_UART3, &ehl_board) }, + { PCI_DEVICE_DATA(INTEL, EHL_UART4, &ehl_board) }, + { PCI_DEVICE_DATA(INTEL, EHL_UART5, &ehl_board) }, + { PCI_DEVICE_DATA(INTEL, BYT_UART1, &byt_board) }, + { PCI_DEVICE_DATA(INTEL, BYT_UART2, &byt_board) }, + { PCI_DEVICE_DATA(INTEL, BSW_UART1, &byt_board) }, + { PCI_DEVICE_DATA(INTEL, BSW_UART2, &byt_board) }, + { PCI_DEVICE_DATA(INTEL, BDW_UART1, &byt_board) }, + { PCI_DEVICE_DATA(INTEL, BDW_UART2, &byt_board) }, + { } +}; +MODULE_DEVICE_TABLE(pci, pci_ids); + +static struct pci_driver lpss8250_pci_driver = { + .name = "8250_lpss", + .id_table = pci_ids, + .probe = lpss8250_probe, + .remove = lpss8250_remove, +}; + +module_pci_driver(lpss8250_pci_driver); + +MODULE_AUTHOR("Intel Corporation"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Intel LPSS UART driver"); diff --git a/drivers/tty/serial/8250/8250_men_mcb.c b/drivers/tty/serial/8250/8250_men_mcb.c new file mode 100644 index 000000000..737c4c31e --- /dev/null +++ b/drivers/tty/serial/8250/8250_men_mcb.c @@ -0,0 +1,177 @@ +// SPDX-License-Identifier: GPL-2.0 +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MEN_UART_ID_Z025 0x19 +#define MEN_UART_ID_Z057 0x39 +#define MEN_UART_ID_Z125 0x7d + +#define MEN_UART_MEM_SIZE 0x10 + +struct serial_8250_men_mcb_data { + struct uart_8250_port uart; + int line; +}; + +/* + * The Z125 16550-compatible UART has no fixed base clock assigned + * So, depending on the board we're on, we need to adjust the + * parameter in order to really set the correct baudrate, and + * do so if possible without user interaction + */ +static u32 men_lookup_uartclk(struct mcb_device *mdev) +{ + /* use default value if board is not available below */ + u32 clkval = 1041666; + + dev_info(&mdev->dev, "%s on board %s\n", + dev_name(&mdev->dev), + mdev->bus->name); + if (strncmp(mdev->bus->name, "F075", 4) == 0) + clkval = 1041666; + else if (strncmp(mdev->bus->name, "F216", 4) == 0) + clkval = 1843200; + else if (strncmp(mdev->bus->name, "G215", 4) == 0) + clkval = 1843200; + else if (strncmp(mdev->bus->name, "F210", 4) == 0) + clkval = 115200; + else + dev_info(&mdev->dev, + "board not detected, using default uartclk\n"); + + clkval = clkval << 4; + + return clkval; +} + +static int get_num_ports(struct mcb_device *mdev, + void __iomem *membase) +{ + switch (mdev->id) { + case MEN_UART_ID_Z125: + return 1U; + case MEN_UART_ID_Z025: + return readb(membase) >> 4; + case MEN_UART_ID_Z057: + return 4U; + default: + dev_err(&mdev->dev, "no supported device!\n"); + return -ENODEV; + } +} + +static int serial_8250_men_mcb_probe(struct mcb_device *mdev, + const struct mcb_device_id *id) +{ + struct serial_8250_men_mcb_data *data; + struct resource *mem; + int num_ports; + int i; + void __iomem *membase; + + mem = mcb_get_resource(mdev, IORESOURCE_MEM); + if (mem == NULL) + return -ENXIO; + membase = devm_ioremap_resource(&mdev->dev, mem); + if (IS_ERR(membase)) + return PTR_ERR_OR_ZERO(membase); + + num_ports = get_num_ports(mdev, membase); + + dev_dbg(&mdev->dev, "found a 16z%03u with %u ports\n", + mdev->id, num_ports); + + if (num_ports <= 0 || num_ports > 4) { + dev_err(&mdev->dev, "unexpected number of ports: %u\n", + num_ports); + return -ENODEV; + } + + data = devm_kcalloc(&mdev->dev, num_ports, + sizeof(struct serial_8250_men_mcb_data), + GFP_KERNEL); + if (!data) + return -ENOMEM; + + mcb_set_drvdata(mdev, data); + + for (i = 0; i < num_ports; i++) { + data[i].uart.port.dev = mdev->dma_dev; + spin_lock_init(&data[i].uart.port.lock); + + data[i].uart.port.type = PORT_16550; + data[i].uart.port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ + | UPF_FIXED_TYPE; + data[i].uart.port.iotype = UPIO_MEM; + data[i].uart.port.uartclk = men_lookup_uartclk(mdev); + data[i].uart.port.regshift = 0; + data[i].uart.port.irq = mcb_get_irq(mdev); + data[i].uart.port.membase = membase; + data[i].uart.port.fifosize = 60; + data[i].uart.port.mapbase = (unsigned long) mem->start + + i * MEN_UART_MEM_SIZE; + data[i].uart.port.iobase = data[i].uart.port.mapbase; + + /* ok, register the port */ + data[i].line = serial8250_register_8250_port(&data[i].uart); + if (data[i].line < 0) { + dev_err(&mdev->dev, "unable to register UART port\n"); + return data[i].line; + } + dev_info(&mdev->dev, "found MCB UART: ttyS%d\n", data[i].line); + } + + return 0; +} + +static void serial_8250_men_mcb_remove(struct mcb_device *mdev) +{ + int num_ports, i; + struct serial_8250_men_mcb_data *data = mcb_get_drvdata(mdev); + + if (!data) + return; + + num_ports = get_num_ports(mdev, data[0].uart.port.membase); + if (num_ports <= 0 || num_ports > 4) { + dev_err(&mdev->dev, "error retrieving number of ports!\n"); + return; + } + + for (i = 0; i < num_ports; i++) + serial8250_unregister_port(data[i].line); +} + +static const struct mcb_device_id serial_8250_men_mcb_ids[] = { + { .device = MEN_UART_ID_Z025 }, + { .device = MEN_UART_ID_Z057 }, + { .device = MEN_UART_ID_Z125 }, + { } +}; +MODULE_DEVICE_TABLE(mcb, serial_8250_men_mcb_ids); + +static struct mcb_driver mcb_driver = { + .driver = { + .name = "8250_men_mcb", + .owner = THIS_MODULE, + }, + .probe = serial_8250_men_mcb_probe, + .remove = serial_8250_men_mcb_remove, + .id_table = serial_8250_men_mcb_ids, +}; +module_mcb_driver(mcb_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("MEN 8250 UART driver"); +MODULE_AUTHOR("Michael Moese + */ + +#include +#include +#include +#include + +#include +#include + +#include "8250.h" + +#define PCI_DEVICE_ID_INTEL_PNW_UART1 0x081b +#define PCI_DEVICE_ID_INTEL_PNW_UART2 0x081c +#define PCI_DEVICE_ID_INTEL_PNW_UART3 0x081d +#define PCI_DEVICE_ID_INTEL_TNG_UART 0x1191 +#define PCI_DEVICE_ID_INTEL_CDF_UART 0x18d8 +#define PCI_DEVICE_ID_INTEL_DNV_UART 0x19d8 + +/* Intel MID Specific registers */ +#define INTEL_MID_UART_FISR 0x08 +#define INTEL_MID_UART_PS 0x30 +#define INTEL_MID_UART_MUL 0x34 +#define INTEL_MID_UART_DIV 0x38 + +struct mid8250; + +struct mid8250_board { + unsigned int flags; + unsigned long freq; + unsigned int base_baud; + int (*setup)(struct mid8250 *, struct uart_port *p); + void (*exit)(struct mid8250 *); +}; + +struct mid8250 { + int line; + int dma_index; + struct pci_dev *dma_dev; + struct uart_8250_dma dma; + struct mid8250_board *board; + struct hsu_dma_chip dma_chip; +}; + +/*****************************************************************************/ + +static int pnw_setup(struct mid8250 *mid, struct uart_port *p) +{ + struct pci_dev *pdev = to_pci_dev(p->dev); + + switch (pdev->device) { + case PCI_DEVICE_ID_INTEL_PNW_UART1: + mid->dma_index = 0; + break; + case PCI_DEVICE_ID_INTEL_PNW_UART2: + mid->dma_index = 1; + break; + case PCI_DEVICE_ID_INTEL_PNW_UART3: + mid->dma_index = 2; + break; + default: + return -EINVAL; + } + + mid->dma_dev = pci_get_slot(pdev->bus, + PCI_DEVFN(PCI_SLOT(pdev->devfn), 3)); + return 0; +} + +static void pnw_exit(struct mid8250 *mid) +{ + pci_dev_put(mid->dma_dev); +} + +static int tng_handle_irq(struct uart_port *p) +{ + struct mid8250 *mid = p->private_data; + struct uart_8250_port *up = up_to_u8250p(p); + struct hsu_dma_chip *chip; + u32 status; + int ret = 0; + int err; + + chip = pci_get_drvdata(mid->dma_dev); + + /* Rx DMA */ + err = hsu_dma_get_status(chip, mid->dma_index * 2 + 1, &status); + if (err > 0) { + serial8250_rx_dma_flush(up); + ret |= 1; + } else if (err == 0) + ret |= hsu_dma_do_irq(chip, mid->dma_index * 2 + 1, status); + + /* Tx DMA */ + err = hsu_dma_get_status(chip, mid->dma_index * 2, &status); + if (err > 0) + ret |= 1; + else if (err == 0) + ret |= hsu_dma_do_irq(chip, mid->dma_index * 2, status); + + /* UART */ + ret |= serial8250_handle_irq(p, serial_port_in(p, UART_IIR)); + return IRQ_RETVAL(ret); +} + +static int tng_setup(struct mid8250 *mid, struct uart_port *p) +{ + struct pci_dev *pdev = to_pci_dev(p->dev); + int index = PCI_FUNC(pdev->devfn); + + /* + * Device 0000:00:04.0 is not a real HSU port. It provides a global + * register set for all HSU ports, although it has the same PCI ID. + * Skip it here. + */ + if (index-- == 0) + return -ENODEV; + + mid->dma_index = index; + mid->dma_dev = pci_get_slot(pdev->bus, PCI_DEVFN(5, 0)); + + p->handle_irq = tng_handle_irq; + return 0; +} + +static void tng_exit(struct mid8250 *mid) +{ + pci_dev_put(mid->dma_dev); +} + +static int dnv_handle_irq(struct uart_port *p) +{ + struct mid8250 *mid = p->private_data; + struct uart_8250_port *up = up_to_u8250p(p); + unsigned int fisr = serial_port_in(p, INTEL_MID_UART_FISR); + u32 status; + int ret = 0; + int err; + + if (fisr & BIT(2)) { + err = hsu_dma_get_status(&mid->dma_chip, 1, &status); + if (err > 0) { + serial8250_rx_dma_flush(up); + ret |= 1; + } else if (err == 0) + ret |= hsu_dma_do_irq(&mid->dma_chip, 1, status); + } + if (fisr & BIT(1)) { + err = hsu_dma_get_status(&mid->dma_chip, 0, &status); + if (err > 0) + ret |= 1; + else if (err == 0) + ret |= hsu_dma_do_irq(&mid->dma_chip, 0, status); + } + if (fisr & BIT(0)) + ret |= serial8250_handle_irq(p, serial_port_in(p, UART_IIR)); + return IRQ_RETVAL(ret); +} + +#define DNV_DMA_CHAN_OFFSET 0x80 + +static int dnv_setup(struct mid8250 *mid, struct uart_port *p) +{ + struct hsu_dma_chip *chip = &mid->dma_chip; + struct pci_dev *pdev = to_pci_dev(p->dev); + unsigned int bar = FL_GET_BASE(mid->board->flags); + int ret; + + pci_set_master(pdev); + + ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES); + if (ret < 0) + return ret; + + p->irq = pci_irq_vector(pdev, 0); + + chip->dev = &pdev->dev; + chip->irq = pci_irq_vector(pdev, 0); + chip->regs = p->membase; + chip->length = pci_resource_len(pdev, bar); + chip->offset = DNV_DMA_CHAN_OFFSET; + + /* Falling back to PIO mode if DMA probing fails */ + ret = hsu_dma_probe(chip); + if (ret) + return 0; + + mid->dma_dev = pdev; + + p->handle_irq = dnv_handle_irq; + return 0; +} + +static void dnv_exit(struct mid8250 *mid) +{ + if (!mid->dma_dev) + return; + hsu_dma_remove(&mid->dma_chip); +} + +/*****************************************************************************/ + +static void mid8250_set_termios(struct uart_port *p, + struct ktermios *termios, + struct ktermios *old) +{ + unsigned int baud = tty_termios_baud_rate(termios); + struct mid8250 *mid = p->private_data; + unsigned short ps = 16; + unsigned long fuart = baud * ps; + unsigned long w = BIT(24) - 1; + unsigned long mul, div; + + /* Gracefully handle the B0 case: fall back to B9600 */ + fuart = fuart ? fuart : 9600 * 16; + + if (mid->board->freq < fuart) { + /* Find prescaler value that satisfies Fuart < Fref */ + if (mid->board->freq > baud) + ps = mid->board->freq / baud; /* baud rate too high */ + else + ps = 1; /* PLL case */ + fuart = baud * ps; + } else { + /* Get Fuart closer to Fref */ + fuart *= rounddown_pow_of_two(mid->board->freq / fuart); + } + + rational_best_approximation(fuart, mid->board->freq, w, w, &mul, &div); + p->uartclk = fuart * 16 / ps; /* core uses ps = 16 always */ + + writel(ps, p->membase + INTEL_MID_UART_PS); /* set PS */ + writel(mul, p->membase + INTEL_MID_UART_MUL); /* set MUL */ + writel(div, p->membase + INTEL_MID_UART_DIV); + + serial8250_do_set_termios(p, termios, old); +} + +static bool mid8250_dma_filter(struct dma_chan *chan, void *param) +{ + struct hsu_dma_slave *s = param; + + if (s->dma_dev != chan->device->dev || s->chan_id != chan->chan_id) + return false; + + chan->private = s; + return true; +} + +static int mid8250_dma_setup(struct mid8250 *mid, struct uart_8250_port *port) +{ + struct uart_8250_dma *dma = &mid->dma; + struct device *dev = port->port.dev; + struct hsu_dma_slave *rx_param; + struct hsu_dma_slave *tx_param; + + if (!mid->dma_dev) + return 0; + + rx_param = devm_kzalloc(dev, sizeof(*rx_param), GFP_KERNEL); + if (!rx_param) + return -ENOMEM; + + tx_param = devm_kzalloc(dev, sizeof(*tx_param), GFP_KERNEL); + if (!tx_param) + return -ENOMEM; + + rx_param->chan_id = mid->dma_index * 2 + 1; + tx_param->chan_id = mid->dma_index * 2; + + dma->rxconf.src_maxburst = 64; + dma->txconf.dst_maxburst = 64; + + rx_param->dma_dev = &mid->dma_dev->dev; + tx_param->dma_dev = &mid->dma_dev->dev; + + dma->fn = mid8250_dma_filter; + dma->rx_param = rx_param; + dma->tx_param = tx_param; + + port->dma = dma; + return 0; +} + +static int mid8250_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct uart_8250_port uart; + struct mid8250 *mid; + unsigned int bar; + int ret; + + ret = pcim_enable_device(pdev); + if (ret) + return ret; + + mid = devm_kzalloc(&pdev->dev, sizeof(*mid), GFP_KERNEL); + if (!mid) + return -ENOMEM; + + mid->board = (struct mid8250_board *)id->driver_data; + bar = FL_GET_BASE(mid->board->flags); + + memset(&uart, 0, sizeof(struct uart_8250_port)); + + uart.port.dev = &pdev->dev; + uart.port.irq = pdev->irq; + uart.port.private_data = mid; + uart.port.type = PORT_16750; + uart.port.iotype = UPIO_MEM; + uart.port.uartclk = mid->board->base_baud * 16; + uart.port.flags = UPF_SHARE_IRQ | UPF_FIXED_PORT | UPF_FIXED_TYPE; + uart.port.set_termios = mid8250_set_termios; + + uart.port.mapbase = pci_resource_start(pdev, bar); + uart.port.membase = pcim_iomap(pdev, bar, 0); + if (!uart.port.membase) + return -ENOMEM; + + if (mid->board->setup) { + ret = mid->board->setup(mid, &uart.port); + if (ret) + return ret; + } + + ret = mid8250_dma_setup(mid, &uart); + if (ret) + goto err; + + ret = serial8250_register_8250_port(&uart); + if (ret < 0) + goto err; + + mid->line = ret; + + pci_set_drvdata(pdev, mid); + return 0; + +err: + mid->board->exit(mid); + return ret; +} + +static void mid8250_remove(struct pci_dev *pdev) +{ + struct mid8250 *mid = pci_get_drvdata(pdev); + + serial8250_unregister_port(mid->line); + + mid->board->exit(mid); +} + +static const struct mid8250_board pnw_board = { + .flags = FL_BASE0, + .freq = 50000000, + .base_baud = 115200, + .setup = pnw_setup, + .exit = pnw_exit, +}; + +static const struct mid8250_board tng_board = { + .flags = FL_BASE0, + .freq = 38400000, + .base_baud = 1843200, + .setup = tng_setup, + .exit = tng_exit, +}; + +static const struct mid8250_board dnv_board = { + .flags = FL_BASE1, + .freq = 133333333, + .base_baud = 115200, + .setup = dnv_setup, + .exit = dnv_exit, +}; + +#define MID_DEVICE(id, board) { PCI_VDEVICE(INTEL, id), (kernel_ulong_t)&board } + +static const struct pci_device_id pci_ids[] = { + MID_DEVICE(PCI_DEVICE_ID_INTEL_PNW_UART1, pnw_board), + MID_DEVICE(PCI_DEVICE_ID_INTEL_PNW_UART2, pnw_board), + MID_DEVICE(PCI_DEVICE_ID_INTEL_PNW_UART3, pnw_board), + MID_DEVICE(PCI_DEVICE_ID_INTEL_TNG_UART, tng_board), + MID_DEVICE(PCI_DEVICE_ID_INTEL_CDF_UART, dnv_board), + MID_DEVICE(PCI_DEVICE_ID_INTEL_DNV_UART, dnv_board), + { }, +}; +MODULE_DEVICE_TABLE(pci, pci_ids); + +static struct pci_driver mid8250_pci_driver = { + .name = "8250_mid", + .id_table = pci_ids, + .probe = mid8250_probe, + .remove = mid8250_remove, +}; + +module_pci_driver(mid8250_pci_driver); + +MODULE_AUTHOR("Intel Corporation"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Intel MID UART driver"); diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c new file mode 100644 index 000000000..de48a5846 --- /dev/null +++ b/drivers/tty/serial/8250/8250_mtk.c @@ -0,0 +1,698 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Mediatek 8250 driver. + * + * Copyright (c) 2014 MundoReader S.L. + * Author: Matthias Brugger + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "8250.h" + +#define MTK_UART_HIGHS 0x09 /* Highspeed register */ +#define MTK_UART_SAMPLE_COUNT 0x0a /* Sample count register */ +#define MTK_UART_SAMPLE_POINT 0x0b /* Sample point register */ +#define MTK_UART_RATE_FIX 0x0d /* UART Rate Fix Register */ +#define MTK_UART_ESCAPE_DAT 0x10 /* Escape Character register */ +#define MTK_UART_ESCAPE_EN 0x11 /* Escape Enable register */ +#define MTK_UART_DMA_EN 0x13 /* DMA Enable register */ +#define MTK_UART_RXTRI_AD 0x14 /* RX Trigger address */ +#define MTK_UART_FRACDIV_L 0x15 /* Fractional divider LSB address */ +#define MTK_UART_FRACDIV_M 0x16 /* Fractional divider MSB address */ +#define MTK_UART_DEBUG0 0x18 +#define MTK_UART_IER_XOFFI 0x20 /* Enable XOFF character interrupt */ +#define MTK_UART_IER_RTSI 0x40 /* Enable RTS Modem status interrupt */ +#define MTK_UART_IER_CTSI 0x80 /* Enable CTS Modem status interrupt */ + +#define MTK_UART_EFR 38 /* I/O: Extended Features Register */ +#define MTK_UART_EFR_EN 0x10 /* Enable enhancement feature */ +#define MTK_UART_EFR_RTS 0x40 /* Enable hardware rx flow control */ +#define MTK_UART_EFR_CTS 0x80 /* Enable hardware tx flow control */ +#define MTK_UART_EFR_NO_SW_FC 0x0 /* no sw flow control */ +#define MTK_UART_EFR_XON1_XOFF1 0xa /* XON1/XOFF1 as sw flow control */ +#define MTK_UART_EFR_XON2_XOFF2 0x5 /* XON2/XOFF2 as sw flow control */ +#define MTK_UART_EFR_SW_FC_MASK 0xf /* Enable CTS Modem status interrupt */ +#define MTK_UART_EFR_HW_FC (MTK_UART_EFR_RTS | MTK_UART_EFR_CTS) +#define MTK_UART_DMA_EN_TX 0x2 +#define MTK_UART_DMA_EN_RX 0x5 + +#define MTK_UART_ESCAPE_CHAR 0x77 /* Escape char added under sw fc */ +#define MTK_UART_RX_SIZE 0x8000 +#define MTK_UART_TX_TRIGGER 1 +#define MTK_UART_RX_TRIGGER MTK_UART_RX_SIZE + +#define MTK_UART_XON1 40 /* I/O: Xon character 1 */ +#define MTK_UART_XOFF1 42 /* I/O: Xoff character 1 */ + +#ifdef CONFIG_SERIAL_8250_DMA +enum dma_rx_status { + DMA_RX_START = 0, + DMA_RX_RUNNING = 1, + DMA_RX_SHUTDOWN = 2, +}; +#endif + +struct mtk8250_data { + int line; + unsigned int rx_pos; + unsigned int clk_count; + struct clk *uart_clk; + struct clk *bus_clk; + struct uart_8250_dma *dma; +#ifdef CONFIG_SERIAL_8250_DMA + enum dma_rx_status rx_status; +#endif + int rx_wakeup_irq; +}; + +/* flow control mode */ +enum { + MTK_UART_FC_NONE, + MTK_UART_FC_SW, + MTK_UART_FC_HW, +}; + +#ifdef CONFIG_SERIAL_8250_DMA +static void mtk8250_rx_dma(struct uart_8250_port *up); + +static void mtk8250_dma_rx_complete(void *param) +{ + struct uart_8250_port *up = param; + struct uart_8250_dma *dma = up->dma; + struct mtk8250_data *data = up->port.private_data; + struct tty_port *tty_port = &up->port.state->port; + struct dma_tx_state state; + int copied, total, cnt; + unsigned char *ptr; + unsigned long flags; + + if (data->rx_status == DMA_RX_SHUTDOWN) + return; + + spin_lock_irqsave(&up->port.lock, flags); + + dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state); + total = dma->rx_size - state.residue; + cnt = total; + + if ((data->rx_pos + cnt) > dma->rx_size) + cnt = dma->rx_size - data->rx_pos; + + ptr = (unsigned char *)(data->rx_pos + dma->rx_buf); + copied = tty_insert_flip_string(tty_port, ptr, cnt); + data->rx_pos += cnt; + + if (total > cnt) { + ptr = (unsigned char *)(dma->rx_buf); + cnt = total - cnt; + copied += tty_insert_flip_string(tty_port, ptr, cnt); + data->rx_pos = cnt; + } + + up->port.icount.rx += copied; + + tty_flip_buffer_push(tty_port); + + mtk8250_rx_dma(up); + + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static void mtk8250_rx_dma(struct uart_8250_port *up) +{ + struct uart_8250_dma *dma = up->dma; + struct dma_async_tx_descriptor *desc; + + desc = dmaengine_prep_slave_single(dma->rxchan, dma->rx_addr, + dma->rx_size, DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) { + pr_err("failed to prepare rx slave single\n"); + return; + } + + desc->callback = mtk8250_dma_rx_complete; + desc->callback_param = up; + + dma->rx_cookie = dmaengine_submit(desc); + + dma_async_issue_pending(dma->rxchan); +} + +static void mtk8250_dma_enable(struct uart_8250_port *up) +{ + struct uart_8250_dma *dma = up->dma; + struct mtk8250_data *data = up->port.private_data; + int lcr = serial_in(up, UART_LCR); + + if (data->rx_status != DMA_RX_START) + return; + + dma->rxconf.src_port_window_size = dma->rx_size; + dma->rxconf.src_addr = dma->rx_addr; + + dma->txconf.dst_port_window_size = UART_XMIT_SIZE; + dma->txconf.dst_addr = dma->tx_addr; + + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | + UART_FCR_CLEAR_XMIT); + serial_out(up, MTK_UART_DMA_EN, + MTK_UART_DMA_EN_RX | MTK_UART_DMA_EN_TX); + + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_out(up, MTK_UART_EFR, UART_EFR_ECB); + serial_out(up, UART_LCR, lcr); + + if (dmaengine_slave_config(dma->rxchan, &dma->rxconf) != 0) + pr_err("failed to configure rx dma channel\n"); + if (dmaengine_slave_config(dma->txchan, &dma->txconf) != 0) + pr_err("failed to configure tx dma channel\n"); + + data->rx_status = DMA_RX_RUNNING; + data->rx_pos = 0; + mtk8250_rx_dma(up); +} +#endif + +static int mtk8250_startup(struct uart_port *port) +{ +#ifdef CONFIG_SERIAL_8250_DMA + struct uart_8250_port *up = up_to_u8250p(port); + struct mtk8250_data *data = port->private_data; + + /* disable DMA for console */ + if (uart_console(port)) + up->dma = NULL; + + if (up->dma) { + data->rx_status = DMA_RX_START; + uart_circ_clear(&port->state->xmit); + } +#endif + memset(&port->icount, 0, sizeof(port->icount)); + + return serial8250_do_startup(port); +} + +static void mtk8250_shutdown(struct uart_port *port) +{ +#ifdef CONFIG_SERIAL_8250_DMA + struct uart_8250_port *up = up_to_u8250p(port); + struct mtk8250_data *data = port->private_data; + + if (up->dma) + data->rx_status = DMA_RX_SHUTDOWN; +#endif + + return serial8250_do_shutdown(port); +} + +static void mtk8250_disable_intrs(struct uart_8250_port *up, int mask) +{ + serial_out(up, UART_IER, serial_in(up, UART_IER) & (~mask)); +} + +static void mtk8250_enable_intrs(struct uart_8250_port *up, int mask) +{ + serial_out(up, UART_IER, serial_in(up, UART_IER) | mask); +} + +static void mtk8250_set_flow_ctrl(struct uart_8250_port *up, int mode) +{ + struct uart_port *port = &up->port; + int lcr = serial_in(up, UART_LCR); + + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_out(up, MTK_UART_EFR, UART_EFR_ECB); + serial_out(up, UART_LCR, lcr); + lcr = serial_in(up, UART_LCR); + + switch (mode) { + case MTK_UART_FC_NONE: + serial_out(up, MTK_UART_ESCAPE_DAT, MTK_UART_ESCAPE_CHAR); + serial_out(up, MTK_UART_ESCAPE_EN, 0x00); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_out(up, MTK_UART_EFR, serial_in(up, MTK_UART_EFR) & + (~(MTK_UART_EFR_HW_FC | MTK_UART_EFR_SW_FC_MASK))); + serial_out(up, UART_LCR, lcr); + mtk8250_disable_intrs(up, MTK_UART_IER_XOFFI | + MTK_UART_IER_RTSI | MTK_UART_IER_CTSI); + break; + + case MTK_UART_FC_HW: + serial_out(up, MTK_UART_ESCAPE_DAT, MTK_UART_ESCAPE_CHAR); + serial_out(up, MTK_UART_ESCAPE_EN, 0x00); + serial_out(up, UART_MCR, UART_MCR_RTS); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + + /*enable hw flow control*/ + serial_out(up, MTK_UART_EFR, MTK_UART_EFR_HW_FC | + (serial_in(up, MTK_UART_EFR) & + (~(MTK_UART_EFR_HW_FC | MTK_UART_EFR_SW_FC_MASK)))); + + serial_out(up, UART_LCR, lcr); + mtk8250_disable_intrs(up, MTK_UART_IER_XOFFI); + mtk8250_enable_intrs(up, MTK_UART_IER_CTSI | MTK_UART_IER_RTSI); + break; + + case MTK_UART_FC_SW: /*MTK software flow control */ + serial_out(up, MTK_UART_ESCAPE_DAT, MTK_UART_ESCAPE_CHAR); + serial_out(up, MTK_UART_ESCAPE_EN, 0x01); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + + /*enable sw flow control */ + serial_out(up, MTK_UART_EFR, MTK_UART_EFR_XON1_XOFF1 | + (serial_in(up, MTK_UART_EFR) & + (~(MTK_UART_EFR_HW_FC | MTK_UART_EFR_SW_FC_MASK)))); + + serial_out(up, MTK_UART_XON1, START_CHAR(port->state->port.tty)); + serial_out(up, MTK_UART_XOFF1, STOP_CHAR(port->state->port.tty)); + serial_out(up, UART_LCR, lcr); + mtk8250_disable_intrs(up, MTK_UART_IER_CTSI|MTK_UART_IER_RTSI); + mtk8250_enable_intrs(up, MTK_UART_IER_XOFFI); + break; + default: + break; + } +} + +static void +mtk8250_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + unsigned short fraction_L_mapping[] = { + 0, 1, 0x5, 0x15, 0x55, 0x57, 0x57, 0x77, 0x7F, 0xFF, 0xFF + }; + unsigned short fraction_M_mapping[] = { + 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 3 + }; + struct uart_8250_port *up = up_to_u8250p(port); + unsigned int baud, quot, fraction; + unsigned long flags; + int mode; + +#ifdef CONFIG_SERIAL_8250_DMA + if (up->dma) { + if (uart_console(port)) { + devm_kfree(up->port.dev, up->dma); + up->dma = NULL; + } else { + mtk8250_dma_enable(up); + } + } +#endif + + /* + * Store the requested baud rate before calling the generic 8250 + * set_termios method. Standard 8250 port expects bauds to be + * no higher than (uartclk / 16) so the baud will be clamped if it + * gets out of that bound. Mediatek 8250 port supports speed + * higher than that, therefore we'll get original baud rate back + * after calling the generic set_termios method and recalculate + * the speed later in this method. + */ + baud = tty_termios_baud_rate(termios); + + serial8250_do_set_termios(port, termios, NULL); + + tty_termios_encode_baud_rate(termios, baud, baud); + + /* + * Mediatek UARTs use an extra highspeed register (MTK_UART_HIGHS) + * + * We need to recalcualte the quot register, as the claculation depends + * on the vaule in the highspeed register. + * + * Some baudrates are not supported by the chip, so we use the next + * lower rate supported and update termios c_flag. + * + * If highspeed register is set to 3, we need to specify sample count + * and sample point to increase accuracy. If not, we reset the + * registers to their default values. + */ + baud = uart_get_baud_rate(port, termios, old, + port->uartclk / 16 / UART_DIV_MAX, + port->uartclk); + + if (baud < 115200) { + serial_port_out(port, MTK_UART_HIGHS, 0x0); + quot = uart_get_divisor(port, baud); + } else { + serial_port_out(port, MTK_UART_HIGHS, 0x3); + quot = DIV_ROUND_UP(port->uartclk, 256 * baud); + } + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + spin_lock_irqsave(&port->lock, flags); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + /* set DLAB we have cval saved in up->lcr from the call to the core */ + serial_port_out(port, UART_LCR, up->lcr | UART_LCR_DLAB); + serial_dl_write(up, quot); + + /* reset DLAB */ + serial_port_out(port, UART_LCR, up->lcr); + + if (baud >= 115200) { + unsigned int tmp; + + tmp = (port->uartclk / (baud * quot)) - 1; + serial_port_out(port, MTK_UART_SAMPLE_COUNT, tmp); + serial_port_out(port, MTK_UART_SAMPLE_POINT, + (tmp >> 1) - 1); + + /*count fraction to set fractoin register */ + fraction = ((port->uartclk * 100) / baud / quot) % 100; + fraction = DIV_ROUND_CLOSEST(fraction, 10); + serial_port_out(port, MTK_UART_FRACDIV_L, + fraction_L_mapping[fraction]); + serial_port_out(port, MTK_UART_FRACDIV_M, + fraction_M_mapping[fraction]); + } else { + serial_port_out(port, MTK_UART_SAMPLE_COUNT, 0x00); + serial_port_out(port, MTK_UART_SAMPLE_POINT, 0xff); + serial_port_out(port, MTK_UART_FRACDIV_L, 0x00); + serial_port_out(port, MTK_UART_FRACDIV_M, 0x00); + } + + if ((termios->c_cflag & CRTSCTS) && (!(termios->c_iflag & CRTSCTS))) + mode = MTK_UART_FC_HW; + else if (termios->c_iflag & CRTSCTS) + mode = MTK_UART_FC_SW; + else + mode = MTK_UART_FC_NONE; + + mtk8250_set_flow_ctrl(up, mode); + + if (uart_console(port)) + up->port.cons->cflag = termios->c_cflag; + + spin_unlock_irqrestore(&port->lock, flags); + /* Don't rewrite B0 */ + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, baud, baud); +} + +static int __maybe_unused mtk8250_runtime_suspend(struct device *dev) +{ + struct mtk8250_data *data = dev_get_drvdata(dev); + struct uart_8250_port *up = serial8250_get_port(data->line); + + /* wait until UART in idle status */ + while + (serial_in(up, MTK_UART_DEBUG0)); + + if (data->clk_count == 0U) { + dev_dbg(dev, "%s clock count is 0\n", __func__); + } else { + clk_disable_unprepare(data->bus_clk); + data->clk_count--; + } + + return 0; +} + +static int __maybe_unused mtk8250_runtime_resume(struct device *dev) +{ + struct mtk8250_data *data = dev_get_drvdata(dev); + int err; + + if (data->clk_count > 0U) { + dev_dbg(dev, "%s clock count is %d\n", __func__, + data->clk_count); + } else { + err = clk_prepare_enable(data->bus_clk); + if (err) { + dev_warn(dev, "Can't enable bus clock\n"); + return err; + } + data->clk_count++; + } + + return 0; +} + +static void +mtk8250_do_pm(struct uart_port *port, unsigned int state, unsigned int old) +{ + if (!state) + if (!mtk8250_runtime_resume(port->dev)) + pm_runtime_get_sync(port->dev); + + serial8250_do_pm(port, state, old); + + if (state) + if (!pm_runtime_put_sync_suspend(port->dev)) + mtk8250_runtime_suspend(port->dev); +} + +#ifdef CONFIG_SERIAL_8250_DMA +static bool mtk8250_dma_filter(struct dma_chan *chan, void *param) +{ + return false; +} +#endif + +static int mtk8250_probe_of(struct platform_device *pdev, struct uart_port *p, + struct mtk8250_data *data) +{ +#ifdef CONFIG_SERIAL_8250_DMA + int dmacnt; +#endif + + data->uart_clk = devm_clk_get(&pdev->dev, "baud"); + if (IS_ERR(data->uart_clk)) { + /* + * For compatibility with older device trees try unnamed + * clk when no baud clk can be found. + */ + data->uart_clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(data->uart_clk)) { + dev_warn(&pdev->dev, "Can't get uart clock\n"); + return PTR_ERR(data->uart_clk); + } + + return 0; + } + + data->bus_clk = devm_clk_get(&pdev->dev, "bus"); + if (IS_ERR(data->bus_clk)) + return PTR_ERR(data->bus_clk); + + data->dma = NULL; +#ifdef CONFIG_SERIAL_8250_DMA + dmacnt = of_property_count_strings(pdev->dev.of_node, "dma-names"); + if (dmacnt == 2) { + data->dma = devm_kzalloc(&pdev->dev, sizeof(*data->dma), + GFP_KERNEL); + if (!data->dma) + return -ENOMEM; + + data->dma->fn = mtk8250_dma_filter; + data->dma->rx_size = MTK_UART_RX_SIZE; + data->dma->rxconf.src_maxburst = MTK_UART_RX_TRIGGER; + data->dma->txconf.dst_maxburst = MTK_UART_TX_TRIGGER; + } +#endif + + return 0; +} + +static int mtk8250_probe(struct platform_device *pdev) +{ + struct uart_8250_port uart = {}; + struct mtk8250_data *data; + struct resource *regs; + int irq, err; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!regs) { + dev_err(&pdev->dev, "no registers defined\n"); + return -EINVAL; + } + + uart.port.membase = devm_ioremap(&pdev->dev, regs->start, + resource_size(regs)); + if (!uart.port.membase) + return -ENOMEM; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->clk_count = 0; + + if (pdev->dev.of_node) { + err = mtk8250_probe_of(pdev, &uart.port, data); + if (err) + return err; + } else + return -ENODEV; + + spin_lock_init(&uart.port.lock); + uart.port.mapbase = regs->start; + uart.port.irq = irq; + uart.port.pm = mtk8250_do_pm; + uart.port.type = PORT_16550; + uart.port.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_PORT; + uart.port.dev = &pdev->dev; + uart.port.iotype = UPIO_MEM32; + uart.port.regshift = 2; + uart.port.private_data = data; + uart.port.shutdown = mtk8250_shutdown; + uart.port.startup = mtk8250_startup; + uart.port.set_termios = mtk8250_set_termios; + uart.port.uartclk = clk_get_rate(data->uart_clk); +#ifdef CONFIG_SERIAL_8250_DMA + if (data->dma) + uart.dma = data->dma; +#endif + + /* Disable Rate Fix function */ + writel(0x0, uart.port.membase + + (MTK_UART_RATE_FIX << uart.port.regshift)); + + platform_set_drvdata(pdev, data); + + pm_runtime_enable(&pdev->dev); + err = mtk8250_runtime_resume(&pdev->dev); + if (err) + goto err_pm_disable; + + data->line = serial8250_register_8250_port(&uart); + if (data->line < 0) { + err = data->line; + goto err_pm_disable; + } + + data->rx_wakeup_irq = platform_get_irq_optional(pdev, 1); + + return 0; + +err_pm_disable: + pm_runtime_disable(&pdev->dev); + + return err; +} + +static int mtk8250_remove(struct platform_device *pdev) +{ + struct mtk8250_data *data = platform_get_drvdata(pdev); + + pm_runtime_get_sync(&pdev->dev); + + serial8250_unregister_port(data->line); + + pm_runtime_disable(&pdev->dev); + pm_runtime_put_noidle(&pdev->dev); + + if (!pm_runtime_status_suspended(&pdev->dev)) + mtk8250_runtime_suspend(&pdev->dev); + + return 0; +} + +static int __maybe_unused mtk8250_suspend(struct device *dev) +{ + struct mtk8250_data *data = dev_get_drvdata(dev); + int irq = data->rx_wakeup_irq; + int err; + + serial8250_suspend_port(data->line); + + pinctrl_pm_select_sleep_state(dev); + if (irq >= 0) { + err = enable_irq_wake(irq); + if (err) { + dev_err(dev, + "failed to enable irq wake on IRQ %d: %d\n", + irq, err); + pinctrl_pm_select_default_state(dev); + serial8250_resume_port(data->line); + return err; + } + } + + return 0; +} + +static int __maybe_unused mtk8250_resume(struct device *dev) +{ + struct mtk8250_data *data = dev_get_drvdata(dev); + int irq = data->rx_wakeup_irq; + + if (irq >= 0) + disable_irq_wake(irq); + pinctrl_pm_select_default_state(dev); + + serial8250_resume_port(data->line); + + return 0; +} + +static const struct dev_pm_ops mtk8250_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(mtk8250_suspend, mtk8250_resume) + SET_RUNTIME_PM_OPS(mtk8250_runtime_suspend, mtk8250_runtime_resume, + NULL) +}; + +static const struct of_device_id mtk8250_of_match[] = { + { .compatible = "mediatek,mt6577-uart" }, + { /* Sentinel */ } +}; +MODULE_DEVICE_TABLE(of, mtk8250_of_match); + +static struct platform_driver mtk8250_platform_driver = { + .driver = { + .name = "mt6577-uart", + .pm = &mtk8250_pm_ops, + .of_match_table = mtk8250_of_match, + }, + .probe = mtk8250_probe, + .remove = mtk8250_remove, +}; +module_platform_driver(mtk8250_platform_driver); + +#ifdef CONFIG_SERIAL_8250_CONSOLE +static int __init early_mtk8250_setup(struct earlycon_device *device, + const char *options) +{ + if (!device->port.membase) + return -ENODEV; + + device->port.iotype = UPIO_MEM32; + device->port.regshift = 2; + + return early_serial8250_setup(device, NULL); +} + +OF_EARLYCON_DECLARE(mtk8250, "mediatek,mt6577-uart", early_mtk8250_setup); +#endif + +MODULE_AUTHOR("Matthias Brugger"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Mediatek 8250 serial port driver"); diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c new file mode 100644 index 000000000..5595c63c4 --- /dev/null +++ b/drivers/tty/serial/8250/8250_of.c @@ -0,0 +1,349 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Serial Port driver for Open Firmware platform devices + * + * Copyright (C) 2006 Arnd Bergmann , IBM Corp. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "8250.h" + +struct of_serial_info { + struct clk *clk; + struct reset_control *rst; + int type; + int line; +}; + +/* + * Fill a struct uart_port for a given device node + */ +static int of_platform_serial_setup(struct platform_device *ofdev, + int type, struct uart_8250_port *up, + struct of_serial_info *info) +{ + struct resource resource; + struct device_node *np = ofdev->dev.of_node; + struct uart_port *port = &up->port; + u32 clk, spd, prop; + int ret, irq; + + memset(port, 0, sizeof *port); + + pm_runtime_enable(&ofdev->dev); + pm_runtime_get_sync(&ofdev->dev); + + if (of_property_read_u32(np, "clock-frequency", &clk)) { + + /* Get clk rate through clk driver if present */ + info->clk = devm_clk_get(&ofdev->dev, NULL); + if (IS_ERR(info->clk)) { + ret = PTR_ERR(info->clk); + if (ret != -EPROBE_DEFER) + dev_warn(&ofdev->dev, + "failed to get clock: %d\n", ret); + goto err_pmruntime; + } + + ret = clk_prepare_enable(info->clk); + if (ret < 0) + goto err_pmruntime; + + clk = clk_get_rate(info->clk); + } + /* If current-speed was set, then try not to change it. */ + if (of_property_read_u32(np, "current-speed", &spd) == 0) + port->custom_divisor = clk / (16 * spd); + + ret = of_address_to_resource(np, 0, &resource); + if (ret) { + dev_warn(&ofdev->dev, "invalid address\n"); + goto err_unprepare; + } + + port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_FIXED_PORT | + UPF_FIXED_TYPE; + spin_lock_init(&port->lock); + + if (resource_type(&resource) == IORESOURCE_IO) { + port->iotype = UPIO_PORT; + port->iobase = resource.start; + } else { + port->mapbase = resource.start; + port->mapsize = resource_size(&resource); + + /* Check for shifted address mapping */ + if (of_property_read_u32(np, "reg-offset", &prop) == 0) { + if (prop >= port->mapsize) { + dev_warn(&ofdev->dev, "reg-offset %u exceeds region size %pa\n", + prop, &port->mapsize); + ret = -EINVAL; + goto err_unprepare; + } + + port->mapbase += prop; + port->mapsize -= prop; + } + + port->iotype = UPIO_MEM; + if (of_property_read_u32(np, "reg-io-width", &prop) == 0) { + switch (prop) { + case 1: + port->iotype = UPIO_MEM; + break; + case 2: + port->iotype = UPIO_MEM16; + break; + case 4: + port->iotype = of_device_is_big_endian(np) ? + UPIO_MEM32BE : UPIO_MEM32; + break; + default: + dev_warn(&ofdev->dev, "unsupported reg-io-width (%d)\n", + prop); + ret = -EINVAL; + goto err_unprepare; + } + } + port->flags |= UPF_IOREMAP; + } + + /* Compatibility with the deprecated pxa driver and 8250_pxa drivers. */ + if (of_device_is_compatible(np, "mrvl,mmp-uart")) + port->regshift = 2; + + /* Check for registers offset within the devices address range */ + if (of_property_read_u32(np, "reg-shift", &prop) == 0) + port->regshift = prop; + + /* Check for fifo size */ + if (of_property_read_u32(np, "fifo-size", &prop) == 0) + port->fifosize = prop; + + /* Check for a fixed line number */ + ret = of_alias_get_id(np, "serial"); + if (ret >= 0) + port->line = ret; + + irq = of_irq_get(np, 0); + if (irq < 0) { + if (irq == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto err_unprepare; + } + /* IRQ support not mandatory */ + irq = 0; + } + + port->irq = irq; + + info->rst = devm_reset_control_get_optional_shared(&ofdev->dev, NULL); + if (IS_ERR(info->rst)) { + ret = PTR_ERR(info->rst); + goto err_unprepare; + } + + ret = reset_control_deassert(info->rst); + if (ret) + goto err_unprepare; + + port->type = type; + port->uartclk = clk; + + if (of_property_read_bool(np, "no-loopback-test")) + port->flags |= UPF_SKIP_TEST; + + port->dev = &ofdev->dev; + port->rs485_config = serial8250_em485_config; + up->rs485_start_tx = serial8250_em485_start_tx; + up->rs485_stop_tx = serial8250_em485_stop_tx; + + switch (type) { + case PORT_RT2880: + port->iotype = UPIO_AU; + break; + } + + if (IS_ENABLED(CONFIG_SERIAL_8250_FSL) && + (of_device_is_compatible(np, "fsl,ns16550") || + of_device_is_compatible(np, "fsl,16550-FIFO64"))) { + port->handle_irq = fsl8250_handle_irq; + port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_8250_CONSOLE); + } + + return 0; +err_unprepare: + clk_disable_unprepare(info->clk); +err_pmruntime: + pm_runtime_put_sync(&ofdev->dev); + pm_runtime_disable(&ofdev->dev); + return ret; +} + +/* + * Try to register a serial port + */ +static int of_platform_serial_probe(struct platform_device *ofdev) +{ + struct of_serial_info *info; + struct uart_8250_port port8250; + unsigned int port_type; + u32 tx_threshold; + int ret; + + port_type = (unsigned long)of_device_get_match_data(&ofdev->dev); + if (port_type == PORT_UNKNOWN) + return -EINVAL; + + if (of_property_read_bool(ofdev->dev.of_node, "used-by-rtas")) + return -EBUSY; + + info = kzalloc(sizeof(*info), GFP_KERNEL); + if (info == NULL) + return -ENOMEM; + + memset(&port8250, 0, sizeof(port8250)); + ret = of_platform_serial_setup(ofdev, port_type, &port8250, info); + if (ret) + goto err_free; + + if (port8250.port.fifosize) + port8250.capabilities = UART_CAP_FIFO; + + /* Check for TX FIFO threshold & set tx_loadsz */ + if ((of_property_read_u32(ofdev->dev.of_node, "tx-threshold", + &tx_threshold) == 0) && + (tx_threshold < port8250.port.fifosize)) + port8250.tx_loadsz = port8250.port.fifosize - tx_threshold; + + if (of_property_read_bool(ofdev->dev.of_node, "auto-flow-control")) + port8250.capabilities |= UART_CAP_AFE; + + if (of_property_read_u32(ofdev->dev.of_node, + "overrun-throttle-ms", + &port8250.overrun_backoff_time_ms) != 0) + port8250.overrun_backoff_time_ms = 0; + + ret = serial8250_register_8250_port(&port8250); + if (ret < 0) + goto err_dispose; + + info->type = port_type; + info->line = ret; + platform_set_drvdata(ofdev, info); + return 0; +err_dispose: + irq_dispose_mapping(port8250.port.irq); + pm_runtime_put_sync(&ofdev->dev); + pm_runtime_disable(&ofdev->dev); + clk_disable_unprepare(info->clk); +err_free: + kfree(info); + return ret; +} + +/* + * Release a line + */ +static int of_platform_serial_remove(struct platform_device *ofdev) +{ + struct of_serial_info *info = platform_get_drvdata(ofdev); + + serial8250_unregister_port(info->line); + + reset_control_assert(info->rst); + pm_runtime_put_sync(&ofdev->dev); + pm_runtime_disable(&ofdev->dev); + clk_disable_unprepare(info->clk); + kfree(info); + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int of_serial_suspend(struct device *dev) +{ + struct of_serial_info *info = dev_get_drvdata(dev); + struct uart_8250_port *port8250 = serial8250_get_port(info->line); + struct uart_port *port = &port8250->port; + + serial8250_suspend_port(info->line); + + if (!uart_console(port) || console_suspend_enabled) { + pm_runtime_put_sync(dev); + clk_disable_unprepare(info->clk); + } + return 0; +} + +static int of_serial_resume(struct device *dev) +{ + struct of_serial_info *info = dev_get_drvdata(dev); + struct uart_8250_port *port8250 = serial8250_get_port(info->line); + struct uart_port *port = &port8250->port; + + if (!uart_console(port) || console_suspend_enabled) { + pm_runtime_get_sync(dev); + clk_prepare_enable(info->clk); + } + + serial8250_resume_port(info->line); + + return 0; +} +#endif +static SIMPLE_DEV_PM_OPS(of_serial_pm_ops, of_serial_suspend, of_serial_resume); + +/* + * A few common types, add more as needed. + */ +static const struct of_device_id of_platform_serial_table[] = { + { .compatible = "ns8250", .data = (void *)PORT_8250, }, + { .compatible = "ns16450", .data = (void *)PORT_16450, }, + { .compatible = "ns16550a", .data = (void *)PORT_16550A, }, + { .compatible = "ns16550", .data = (void *)PORT_16550, }, + { .compatible = "ns16750", .data = (void *)PORT_16750, }, + { .compatible = "ns16850", .data = (void *)PORT_16850, }, + { .compatible = "nxp,lpc3220-uart", .data = (void *)PORT_LPC3220, }, + { .compatible = "ralink,rt2880-uart", .data = (void *)PORT_RT2880, }, + { .compatible = "intel,xscale-uart", .data = (void *)PORT_XSCALE, }, + { .compatible = "altr,16550-FIFO32", + .data = (void *)PORT_ALTR_16550_F32, }, + { .compatible = "altr,16550-FIFO64", + .data = (void *)PORT_ALTR_16550_F64, }, + { .compatible = "altr,16550-FIFO128", + .data = (void *)PORT_ALTR_16550_F128, }, + { .compatible = "mediatek,mtk-btif", + .data = (void *)PORT_MTK_BTIF, }, + { .compatible = "mrvl,mmp-uart", + .data = (void *)PORT_XSCALE, }, + { .compatible = "ti,da830-uart", .data = (void *)PORT_DA830, }, + { .compatible = "nuvoton,npcm750-uart", .data = (void *)PORT_NPCM, }, + { /* end of list */ }, +}; +MODULE_DEVICE_TABLE(of, of_platform_serial_table); + +static struct platform_driver of_platform_serial_driver = { + .driver = { + .name = "of_serial", + .of_match_table = of_platform_serial_table, + .pm = &of_serial_pm_ops, + }, + .probe = of_platform_serial_probe, + .remove = of_platform_serial_remove, +}; + +module_platform_driver(of_platform_serial_driver); + +MODULE_AUTHOR("Arnd Bergmann "); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Serial Port driver for Open Firmware platform devices"); diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c new file mode 100644 index 000000000..25765ebb7 --- /dev/null +++ b/drivers/tty/serial/8250/8250_omap.c @@ -0,0 +1,1748 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * 8250-core based driver for the OMAP internal UART + * + * based on omap-serial.c, Copyright (C) 2010 Texas Instruments. + * + * Copyright (C) 2014 Sebastian Andrzej Siewior + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "8250.h" + +#define DEFAULT_CLK_SPEED 48000000 +#define OMAP_UART_REGSHIFT 2 + +#define UART_ERRATA_i202_MDR1_ACCESS (1 << 0) +#define OMAP_UART_WER_HAS_TX_WAKEUP (1 << 1) +#define OMAP_DMA_TX_KICK (1 << 2) +/* + * See Advisory 21 in AM437x errata SPRZ408B, updated April 2015. + * The same errata is applicable to AM335x and DRA7x processors too. + */ +#define UART_ERRATA_CLOCK_DISABLE (1 << 3) +#define UART_HAS_EFR2 BIT(4) +#define UART_HAS_RHR_IT_DIS BIT(5) +#define UART_RX_TIMEOUT_QUIRK BIT(6) + +#define OMAP_UART_FCR_RX_TRIG 6 +#define OMAP_UART_FCR_TX_TRIG 4 + +/* SCR register bitmasks */ +#define OMAP_UART_SCR_RX_TRIG_GRANU1_MASK (1 << 7) +#define OMAP_UART_SCR_TX_TRIG_GRANU1_MASK (1 << 6) +#define OMAP_UART_SCR_TX_EMPTY (1 << 3) +#define OMAP_UART_SCR_DMAMODE_MASK (3 << 1) +#define OMAP_UART_SCR_DMAMODE_1 (1 << 1) +#define OMAP_UART_SCR_DMAMODE_CTL (1 << 0) + +/* MVR register bitmasks */ +#define OMAP_UART_MVR_SCHEME_SHIFT 30 +#define OMAP_UART_LEGACY_MVR_MAJ_MASK 0xf0 +#define OMAP_UART_LEGACY_MVR_MAJ_SHIFT 4 +#define OMAP_UART_LEGACY_MVR_MIN_MASK 0x0f +#define OMAP_UART_MVR_MAJ_MASK 0x700 +#define OMAP_UART_MVR_MAJ_SHIFT 8 +#define OMAP_UART_MVR_MIN_MASK 0x3f + +/* SYSC register bitmasks */ +#define OMAP_UART_SYSC_SOFTRESET (1 << 1) + +/* SYSS register bitmasks */ +#define OMAP_UART_SYSS_RESETDONE (1 << 0) + +#define UART_TI752_TLR_TX 0 +#define UART_TI752_TLR_RX 4 + +#define TRIGGER_TLR_MASK(x) ((x & 0x3c) >> 2) +#define TRIGGER_FCR_MASK(x) (x & 3) + +/* Enable XON/XOFF flow control on output */ +#define OMAP_UART_SW_TX 0x08 +/* Enable XON/XOFF flow control on input */ +#define OMAP_UART_SW_RX 0x02 + +#define OMAP_UART_WER_MOD_WKUP 0x7f +#define OMAP_UART_TX_WAKEUP_EN (1 << 7) + +#define TX_TRIGGER 1 +#define RX_TRIGGER 48 + +#define OMAP_UART_TCR_RESTORE(x) ((x / 4) << 4) +#define OMAP_UART_TCR_HALT(x) ((x / 4) << 0) + +#define UART_BUILD_REVISION(x, y) (((x) << 8) | (y)) + +#define OMAP_UART_REV_46 0x0406 +#define OMAP_UART_REV_52 0x0502 +#define OMAP_UART_REV_63 0x0603 + +/* Interrupt Enable Register 2 */ +#define UART_OMAP_IER2 0x1B +#define UART_OMAP_IER2_RHR_IT_DIS BIT(2) + +/* Enhanced features register 2 */ +#define UART_OMAP_EFR2 0x23 +#define UART_OMAP_EFR2_TIMEOUT_BEHAVE BIT(6) + +/* RX FIFO occupancy indicator */ +#define UART_OMAP_RX_LVL 0x19 + +struct omap8250_priv { + void __iomem *membase; + int line; + u8 habit; + u8 mdr1; + u8 efr; + u8 scr; + u8 wer; + u8 xon; + u8 xoff; + u8 delayed_restore; + u16 quot; + + u8 tx_trigger; + u8 rx_trigger; + bool is_suspending; + int wakeirq; + int wakeups_enabled; + u32 latency; + u32 calc_latency; + struct pm_qos_request pm_qos_request; + struct work_struct qos_work; + struct uart_8250_dma omap8250_dma; + spinlock_t rx_dma_lock; + bool rx_dma_broken; + bool throttled; +}; + +struct omap8250_dma_params { + u32 rx_size; + u8 rx_trigger; + u8 tx_trigger; +}; + +struct omap8250_platdata { + struct omap8250_dma_params *dma_params; + u8 habit; +}; + +#ifdef CONFIG_SERIAL_8250_DMA +static void omap_8250_rx_dma_flush(struct uart_8250_port *p); +#else +static inline void omap_8250_rx_dma_flush(struct uart_8250_port *p) { } +#endif + +static u32 uart_read(struct omap8250_priv *priv, u32 reg) +{ + return readl(priv->membase + (reg << OMAP_UART_REGSHIFT)); +} + +static void uart_write(struct omap8250_priv *priv, u32 reg, u32 val) +{ + writel(val, priv->membase + (reg << OMAP_UART_REGSHIFT)); +} + +/* + * Called on runtime PM resume path from omap8250_restore_regs(), and + * omap8250_set_mctrl(). + */ +static void __omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_8250_port *up = up_to_u8250p(port); + struct omap8250_priv *priv = up->port.private_data; + u8 lcr; + + serial8250_do_set_mctrl(port, mctrl); + + if (!mctrl_gpio_to_gpiod(up->gpios, UART_GPIO_RTS)) { + /* + * Turn off autoRTS if RTS is lowered and restore autoRTS + * setting if RTS is raised + */ + lcr = serial_in(up, UART_LCR); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + if ((mctrl & TIOCM_RTS) && (port->status & UPSTAT_AUTORTS)) + priv->efr |= UART_EFR_RTS; + else + priv->efr &= ~UART_EFR_RTS; + serial_out(up, UART_EFR, priv->efr); + serial_out(up, UART_LCR, lcr); + } +} + +static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + int err; + + err = pm_runtime_resume_and_get(port->dev); + if (err) + return; + + __omap8250_set_mctrl(port, mctrl); + + pm_runtime_mark_last_busy(port->dev); + pm_runtime_put_autosuspend(port->dev); +} + +/* + * Work Around for Errata i202 (2430, 3430, 3630, 4430 and 4460) + * The access to uart register after MDR1 Access + * causes UART to corrupt data. + * + * Need a delay = + * 5 L4 clock cycles + 5 UART functional clock cycle (@48MHz = ~0.2uS) + * give 10 times as much + */ +static void omap_8250_mdr1_errataset(struct uart_8250_port *up, + struct omap8250_priv *priv) +{ + serial_out(up, UART_OMAP_MDR1, priv->mdr1); + udelay(2); + serial_out(up, UART_FCR, up->fcr | UART_FCR_CLEAR_XMIT | + UART_FCR_CLEAR_RCVR); +} + +static void omap_8250_get_divisor(struct uart_port *port, unsigned int baud, + struct omap8250_priv *priv) +{ + unsigned int uartclk = port->uartclk; + unsigned int div_13, div_16; + unsigned int abs_d13, abs_d16; + + /* + * Old custom speed handling. + */ + if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST) { + priv->quot = port->custom_divisor & UART_DIV_MAX; + /* + * I assume that nobody is using this. But hey, if somebody + * would like to specify the divisor _and_ the mode then the + * driver is ready and waiting for it. + */ + if (port->custom_divisor & (1 << 16)) + priv->mdr1 = UART_OMAP_MDR1_13X_MODE; + else + priv->mdr1 = UART_OMAP_MDR1_16X_MODE; + return; + } + div_13 = DIV_ROUND_CLOSEST(uartclk, 13 * baud); + div_16 = DIV_ROUND_CLOSEST(uartclk, 16 * baud); + + if (!div_13) + div_13 = 1; + if (!div_16) + div_16 = 1; + + abs_d13 = abs(baud - uartclk / 13 / div_13); + abs_d16 = abs(baud - uartclk / 16 / div_16); + + if (abs_d13 >= abs_d16) { + priv->mdr1 = UART_OMAP_MDR1_16X_MODE; + priv->quot = div_16; + } else { + priv->mdr1 = UART_OMAP_MDR1_13X_MODE; + priv->quot = div_13; + } +} + +static void omap8250_update_scr(struct uart_8250_port *up, + struct omap8250_priv *priv) +{ + u8 old_scr; + + old_scr = serial_in(up, UART_OMAP_SCR); + if (old_scr == priv->scr) + return; + + /* + * The manual recommends not to enable the DMA mode selector in the SCR + * (instead of the FCR) register _and_ selecting the DMA mode as one + * register write because this may lead to malfunction. + */ + if (priv->scr & OMAP_UART_SCR_DMAMODE_MASK) + serial_out(up, UART_OMAP_SCR, + priv->scr & ~OMAP_UART_SCR_DMAMODE_MASK); + serial_out(up, UART_OMAP_SCR, priv->scr); +} + +static void omap8250_update_mdr1(struct uart_8250_port *up, + struct omap8250_priv *priv) +{ + if (priv->habit & UART_ERRATA_i202_MDR1_ACCESS) + omap_8250_mdr1_errataset(up, priv); + else + serial_out(up, UART_OMAP_MDR1, priv->mdr1); +} + +static void omap8250_restore_regs(struct uart_8250_port *up) +{ + struct omap8250_priv *priv = up->port.private_data; + struct uart_8250_dma *dma = up->dma; + u8 mcr = serial8250_in_MCR(up); + + if (dma && dma->tx_running) { + /* + * TCSANOW requests the change to occur immediately however if + * we have a TX-DMA operation in progress then it has been + * observed that it might stall and never complete. Therefore we + * delay DMA completes to prevent this hang from happen. + */ + priv->delayed_restore = 1; + return; + } + + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_out(up, UART_EFR, UART_EFR_ECB); + + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); + serial8250_out_MCR(up, mcr | UART_MCR_TCRTLR); + serial_out(up, UART_FCR, up->fcr); + + omap8250_update_scr(up, priv); + + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + + serial_out(up, UART_TI752_TCR, OMAP_UART_TCR_RESTORE(16) | + OMAP_UART_TCR_HALT(52)); + serial_out(up, UART_TI752_TLR, + TRIGGER_TLR_MASK(priv->tx_trigger) << UART_TI752_TLR_TX | + TRIGGER_TLR_MASK(priv->rx_trigger) << UART_TI752_TLR_RX); + + serial_out(up, UART_LCR, 0); + + /* drop TCR + TLR access, we setup XON/XOFF later */ + serial8250_out_MCR(up, mcr); + + serial_out(up, UART_IER, up->ier); + + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_dl_write(up, priv->quot); + + serial_out(up, UART_EFR, priv->efr); + + /* Configure flow control */ + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_out(up, UART_XON1, priv->xon); + serial_out(up, UART_XOFF1, priv->xoff); + + serial_out(up, UART_LCR, up->lcr); + + omap8250_update_mdr1(up, priv); + + __omap8250_set_mctrl(&up->port, up->port.mctrl); + + if (up->port.rs485.flags & SER_RS485_ENABLED) + serial8250_em485_stop_tx(up); +} + +/* + * OMAP can use "CLK / (16 or 13) / div" for baud rate. And then we have have + * some differences in how we want to handle flow control. + */ +static void omap_8250_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + struct uart_8250_port *up = up_to_u8250p(port); + struct omap8250_priv *priv = up->port.private_data; + unsigned char cval = 0; + unsigned int baud; + + switch (termios->c_cflag & CSIZE) { + case CS5: + cval = UART_LCR_WLEN5; + break; + case CS6: + cval = UART_LCR_WLEN6; + break; + case CS7: + cval = UART_LCR_WLEN7; + break; + default: + case CS8: + cval = UART_LCR_WLEN8; + break; + } + + if (termios->c_cflag & CSTOPB) + cval |= UART_LCR_STOP; + if (termios->c_cflag & PARENB) + cval |= UART_LCR_PARITY; + if (!(termios->c_cflag & PARODD)) + cval |= UART_LCR_EPAR; + if (termios->c_cflag & CMSPAR) + cval |= UART_LCR_SPAR; + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, + port->uartclk / 16 / UART_DIV_MAX, + port->uartclk / 13); + omap_8250_get_divisor(port, baud, priv); + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + pm_runtime_get_sync(port->dev); + spin_lock_irq(&port->lock); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + if (termios->c_iflag & INPCK) + up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (termios->c_iflag & (IGNBRK | PARMRK)) + up->port.read_status_mask |= UART_LSR_BI; + + /* + * Characters to ignore + */ + up->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; + if (termios->c_iflag & IGNBRK) { + up->port.ignore_status_mask |= UART_LSR_BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_OE; + } + + /* + * ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + up->port.ignore_status_mask |= UART_LSR_DR; + + /* + * Modem status interrupts + */ + up->ier &= ~UART_IER_MSI; + if (UART_ENABLE_MS(&up->port, termios->c_cflag)) + up->ier |= UART_IER_MSI; + + up->lcr = cval; + /* Up to here it was mostly serial8250_do_set_termios() */ + + /* + * We enable TRIG_GRANU for RX and TX and additionally we set + * SCR_TX_EMPTY bit. The result is the following: + * - RX_TRIGGER amount of bytes in the FIFO will cause an interrupt. + * - less than RX_TRIGGER number of bytes will also cause an interrupt + * once the UART decides that there no new bytes arriving. + * - Once THRE is enabled, the interrupt will be fired once the FIFO is + * empty - the trigger level is ignored here. + * + * Once DMA is enabled: + * - UART will assert the TX DMA line once there is room for TX_TRIGGER + * bytes in the TX FIFO. On each assert the DMA engine will move + * TX_TRIGGER bytes into the FIFO. + * - UART will assert the RX DMA line once there are RX_TRIGGER bytes in + * the FIFO and move RX_TRIGGER bytes. + * This is because threshold and trigger values are the same. + */ + up->fcr = UART_FCR_ENABLE_FIFO; + up->fcr |= TRIGGER_FCR_MASK(priv->tx_trigger) << OMAP_UART_FCR_TX_TRIG; + up->fcr |= TRIGGER_FCR_MASK(priv->rx_trigger) << OMAP_UART_FCR_RX_TRIG; + + priv->scr = OMAP_UART_SCR_RX_TRIG_GRANU1_MASK | OMAP_UART_SCR_TX_EMPTY | + OMAP_UART_SCR_TX_TRIG_GRANU1_MASK; + + if (up->dma) + priv->scr |= OMAP_UART_SCR_DMAMODE_1 | + OMAP_UART_SCR_DMAMODE_CTL; + + priv->xon = termios->c_cc[VSTART]; + priv->xoff = termios->c_cc[VSTOP]; + + priv->efr = 0; + up->port.status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS | UPSTAT_AUTOXOFF); + + if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW && + !mctrl_gpio_to_gpiod(up->gpios, UART_GPIO_RTS) && + !mctrl_gpio_to_gpiod(up->gpios, UART_GPIO_CTS)) { + /* Enable AUTOCTS (autoRTS is enabled when RTS is raised) */ + up->port.status |= UPSTAT_AUTOCTS | UPSTAT_AUTORTS; + priv->efr |= UART_EFR_CTS; + } else if (up->port.flags & UPF_SOFT_FLOW) { + /* + * OMAP rx s/w flow control is borked; the transmitter remains + * stuck off even if rx flow control is subsequently disabled + */ + + /* + * IXOFF Flag: + * Enable XON/XOFF flow control on output. + * Transmit XON1, XOFF1 + */ + if (termios->c_iflag & IXOFF) { + up->port.status |= UPSTAT_AUTOXOFF; + priv->efr |= OMAP_UART_SW_TX; + } + } + omap8250_restore_regs(up); + + spin_unlock_irq(&up->port.lock); + pm_runtime_mark_last_busy(port->dev); + pm_runtime_put_autosuspend(port->dev); + + /* calculate wakeup latency constraint */ + priv->calc_latency = USEC_PER_SEC * 64 * 8 / baud; + priv->latency = priv->calc_latency; + + schedule_work(&priv->qos_work); + + /* Don't rewrite B0 */ + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, baud, baud); +} + +/* same as 8250 except that we may have extra flow bits set in EFR */ +static void omap_8250_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct uart_8250_port *up = up_to_u8250p(port); + u8 efr; + + pm_runtime_get_sync(port->dev); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + efr = serial_in(up, UART_EFR); + serial_out(up, UART_EFR, efr | UART_EFR_ECB); + serial_out(up, UART_LCR, 0); + + serial_out(up, UART_IER, (state != 0) ? UART_IERX_SLEEP : 0); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_out(up, UART_EFR, efr); + serial_out(up, UART_LCR, 0); + + pm_runtime_mark_last_busy(port->dev); + pm_runtime_put_autosuspend(port->dev); +} + +static void omap_serial_fill_features_erratas(struct uart_8250_port *up, + struct omap8250_priv *priv) +{ + const struct soc_device_attribute k3_soc_devices[] = { + { .family = "AM65X", }, + { .family = "J721E", .revision = "SR1.0" }, + { /* sentinel */ } + }; + u32 mvr, scheme; + u16 revision, major, minor; + + mvr = uart_read(priv, UART_OMAP_MVER); + + /* Check revision register scheme */ + scheme = mvr >> OMAP_UART_MVR_SCHEME_SHIFT; + + switch (scheme) { + case 0: /* Legacy Scheme: OMAP2/3 */ + /* MINOR_REV[0:4], MAJOR_REV[4:7] */ + major = (mvr & OMAP_UART_LEGACY_MVR_MAJ_MASK) >> + OMAP_UART_LEGACY_MVR_MAJ_SHIFT; + minor = (mvr & OMAP_UART_LEGACY_MVR_MIN_MASK); + break; + case 1: + /* New Scheme: OMAP4+ */ + /* MINOR_REV[0:5], MAJOR_REV[8:10] */ + major = (mvr & OMAP_UART_MVR_MAJ_MASK) >> + OMAP_UART_MVR_MAJ_SHIFT; + minor = (mvr & OMAP_UART_MVR_MIN_MASK); + break; + default: + dev_warn(up->port.dev, + "Unknown revision, defaulting to highest\n"); + /* highest possible revision */ + major = 0xff; + minor = 0xff; + } + /* normalize revision for the driver */ + revision = UART_BUILD_REVISION(major, minor); + + switch (revision) { + case OMAP_UART_REV_46: + priv->habit |= UART_ERRATA_i202_MDR1_ACCESS; + break; + case OMAP_UART_REV_52: + priv->habit |= UART_ERRATA_i202_MDR1_ACCESS | + OMAP_UART_WER_HAS_TX_WAKEUP; + break; + case OMAP_UART_REV_63: + priv->habit |= UART_ERRATA_i202_MDR1_ACCESS | + OMAP_UART_WER_HAS_TX_WAKEUP; + break; + default: + break; + } + + /* + * AM65x SR1.0, AM65x SR2.0 and J721e SR1.0 don't + * don't have RHR_IT_DIS bit in IER2 register. So drop to flag + * to enable errata workaround. + */ + if (soc_device_match(k3_soc_devices)) + priv->habit &= ~UART_HAS_RHR_IT_DIS; +} + +static void omap8250_uart_qos_work(struct work_struct *work) +{ + struct omap8250_priv *priv; + + priv = container_of(work, struct omap8250_priv, qos_work); + cpu_latency_qos_update_request(&priv->pm_qos_request, priv->latency); +} + +#ifdef CONFIG_SERIAL_8250_DMA +static int omap_8250_dma_handle_irq(struct uart_port *port); +#endif + +static irqreturn_t omap8250_irq(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + struct omap8250_priv *priv = port->private_data; + struct uart_8250_port *up = up_to_u8250p(port); + unsigned int iir, lsr; + int ret; + +#ifdef CONFIG_SERIAL_8250_DMA + if (up->dma) { + ret = omap_8250_dma_handle_irq(port); + return IRQ_RETVAL(ret); + } +#endif + + serial8250_rpm_get(up); + lsr = serial_port_in(port, UART_LSR); + iir = serial_port_in(port, UART_IIR); + ret = serial8250_handle_irq(port, iir); + + /* + * On K3 SoCs, it is observed that RX TIMEOUT is signalled after + * FIFO has been drained, in which case a dummy read of RX FIFO + * is required to clear RX TIMEOUT condition. + */ + if (priv->habit & UART_RX_TIMEOUT_QUIRK && + (iir & UART_IIR_RX_TIMEOUT) == UART_IIR_RX_TIMEOUT && + serial_port_in(port, UART_OMAP_RX_LVL) == 0) { + serial_port_in(port, UART_RX); + } + + /* Stop processing interrupts on input overrun */ + if ((lsr & UART_LSR_OE) && up->overrun_backoff_time_ms > 0) { + unsigned long delay; + + /* Synchronize UART_IER access against the console. */ + spin_lock(&port->lock); + up->ier = port->serial_in(port, UART_IER); + if (up->ier & (UART_IER_RLSI | UART_IER_RDI)) { + port->ops->stop_rx(port); + } else { + /* Keep restarting the timer until + * the input overrun subsides. + */ + cancel_delayed_work(&up->overrun_backoff); + } + spin_unlock(&port->lock); + + delay = msecs_to_jiffies(up->overrun_backoff_time_ms); + schedule_delayed_work(&up->overrun_backoff, delay); + } + + serial8250_rpm_put(up); + + return IRQ_RETVAL(ret); +} + +static int omap_8250_startup(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + struct omap8250_priv *priv = port->private_data; + int ret; + + if (priv->wakeirq) { + ret = dev_pm_set_dedicated_wake_irq(port->dev, priv->wakeirq); + if (ret) + return ret; + } + + pm_runtime_get_sync(port->dev); + + serial_out(up, UART_FCR, UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + + serial_out(up, UART_LCR, UART_LCR_WLEN8); + + up->lsr_saved_flags = 0; + up->msr_saved_flags = 0; + + /* Disable DMA for console UART */ + if (uart_console(port)) + up->dma = NULL; + + if (up->dma) { + ret = serial8250_request_dma(up); + if (ret) { + dev_warn_ratelimited(port->dev, + "failed to request DMA\n"); + up->dma = NULL; + } + } + + ret = request_irq(port->irq, omap8250_irq, IRQF_SHARED, + dev_name(port->dev), port); + if (ret < 0) + goto err; + + up->ier = UART_IER_RLSI | UART_IER_RDI; + serial_out(up, UART_IER, up->ier); + +#ifdef CONFIG_PM + up->capabilities |= UART_CAP_RPM; +#endif + + /* Enable module level wake up */ + priv->wer = OMAP_UART_WER_MOD_WKUP; + if (priv->habit & OMAP_UART_WER_HAS_TX_WAKEUP) + priv->wer |= OMAP_UART_TX_WAKEUP_EN; + serial_out(up, UART_OMAP_WER, priv->wer); + + if (up->dma && !(priv->habit & UART_HAS_EFR2)) + up->dma->rx_dma(up); + + pm_runtime_mark_last_busy(port->dev); + pm_runtime_put_autosuspend(port->dev); + return 0; +err: + pm_runtime_mark_last_busy(port->dev); + pm_runtime_put_autosuspend(port->dev); + dev_pm_clear_wake_irq(port->dev); + return ret; +} + +static void omap_8250_shutdown(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + struct omap8250_priv *priv = port->private_data; + + flush_work(&priv->qos_work); + if (up->dma) + omap_8250_rx_dma_flush(up); + + pm_runtime_get_sync(port->dev); + + serial_out(up, UART_OMAP_WER, 0); + if (priv->habit & UART_HAS_EFR2) + serial_out(up, UART_OMAP_EFR2, 0x0); + + up->ier = 0; + serial_out(up, UART_IER, 0); + + if (up->dma) + serial8250_release_dma(up); + + /* + * Disable break condition and FIFOs + */ + if (up->lcr & UART_LCR_SBC) + serial_out(up, UART_LCR, up->lcr & ~UART_LCR_SBC); + serial_out(up, UART_FCR, UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + + pm_runtime_mark_last_busy(port->dev); + pm_runtime_put_autosuspend(port->dev); + free_irq(port->irq, port); + dev_pm_clear_wake_irq(port->dev); +} + +static void omap_8250_throttle(struct uart_port *port) +{ + struct omap8250_priv *priv = port->private_data; + unsigned long flags; + + pm_runtime_get_sync(port->dev); + + spin_lock_irqsave(&port->lock, flags); + port->ops->stop_rx(port); + priv->throttled = true; + spin_unlock_irqrestore(&port->lock, flags); + + pm_runtime_mark_last_busy(port->dev); + pm_runtime_put_autosuspend(port->dev); +} + +static void omap_8250_unthrottle(struct uart_port *port) +{ + struct omap8250_priv *priv = port->private_data; + struct uart_8250_port *up = up_to_u8250p(port); + unsigned long flags; + + pm_runtime_get_sync(port->dev); + + spin_lock_irqsave(&port->lock, flags); + priv->throttled = false; + if (up->dma) + up->dma->rx_dma(up); + up->ier |= UART_IER_RLSI | UART_IER_RDI; + port->read_status_mask |= UART_LSR_DR; + serial_out(up, UART_IER, up->ier); + spin_unlock_irqrestore(&port->lock, flags); + + pm_runtime_mark_last_busy(port->dev); + pm_runtime_put_autosuspend(port->dev); +} + +#ifdef CONFIG_SERIAL_8250_DMA +static int omap_8250_rx_dma(struct uart_8250_port *p); + +/* Must be called while priv->rx_dma_lock is held */ +static void __dma_rx_do_complete(struct uart_8250_port *p) +{ + struct uart_8250_dma *dma = p->dma; + struct tty_port *tty_port = &p->port.state->port; + struct omap8250_priv *priv = p->port.private_data; + struct dma_chan *rxchan = dma->rxchan; + dma_cookie_t cookie; + struct dma_tx_state state; + int count; + int ret; + u32 reg; + + if (!dma->rx_running) + goto out; + + cookie = dma->rx_cookie; + dma->rx_running = 0; + + /* Re-enable RX FIFO interrupt now that transfer is complete */ + if (priv->habit & UART_HAS_RHR_IT_DIS) { + reg = serial_in(p, UART_OMAP_IER2); + reg &= ~UART_OMAP_IER2_RHR_IT_DIS; + serial_out(p, UART_OMAP_IER2, reg); + } + + dmaengine_tx_status(rxchan, cookie, &state); + + count = dma->rx_size - state.residue + state.in_flight_bytes; + if (count < dma->rx_size) { + dmaengine_terminate_async(rxchan); + + /* + * Poll for teardown to complete which guarantees in + * flight data is drained. + */ + if (state.in_flight_bytes) { + int poll_count = 25; + + while (dmaengine_tx_status(rxchan, cookie, NULL) && + poll_count--) + cpu_relax(); + + if (poll_count == -1) + dev_err(p->port.dev, "teardown incomplete\n"); + } + } + if (!count) + goto out; + ret = tty_insert_flip_string(tty_port, dma->rx_buf, count); + + p->port.icount.rx += ret; + p->port.icount.buf_overrun += count - ret; +out: + + tty_flip_buffer_push(tty_port); +} + +static void __dma_rx_complete(void *param) +{ + struct uart_8250_port *p = param; + struct omap8250_priv *priv = p->port.private_data; + struct uart_8250_dma *dma = p->dma; + struct dma_tx_state state; + unsigned long flags; + + spin_lock_irqsave(&p->port.lock, flags); + + /* + * If the tx status is not DMA_COMPLETE, then this is a delayed + * completion callback. A previous RX timeout flush would have + * already pushed the data, so exit. + */ + if (dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state) != + DMA_COMPLETE) { + spin_unlock_irqrestore(&p->port.lock, flags); + return; + } + __dma_rx_do_complete(p); + if (!priv->throttled) { + p->ier |= UART_IER_RLSI | UART_IER_RDI; + serial_out(p, UART_IER, p->ier); + if (!(priv->habit & UART_HAS_EFR2)) + omap_8250_rx_dma(p); + } + + spin_unlock_irqrestore(&p->port.lock, flags); +} + +static void omap_8250_rx_dma_flush(struct uart_8250_port *p) +{ + struct omap8250_priv *priv = p->port.private_data; + struct uart_8250_dma *dma = p->dma; + struct dma_tx_state state; + unsigned long flags; + int ret; + + spin_lock_irqsave(&priv->rx_dma_lock, flags); + + if (!dma->rx_running) { + spin_unlock_irqrestore(&priv->rx_dma_lock, flags); + return; + } + + ret = dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state); + if (ret == DMA_IN_PROGRESS) { + ret = dmaengine_pause(dma->rxchan); + if (WARN_ON_ONCE(ret)) + priv->rx_dma_broken = true; + } + __dma_rx_do_complete(p); + spin_unlock_irqrestore(&priv->rx_dma_lock, flags); +} + +static int omap_8250_rx_dma(struct uart_8250_port *p) +{ + struct omap8250_priv *priv = p->port.private_data; + struct uart_8250_dma *dma = p->dma; + int err = 0; + struct dma_async_tx_descriptor *desc; + unsigned long flags; + u32 reg; + + if (priv->rx_dma_broken) + return -EINVAL; + + spin_lock_irqsave(&priv->rx_dma_lock, flags); + + if (dma->rx_running) { + enum dma_status state; + + state = dmaengine_tx_status(dma->rxchan, dma->rx_cookie, NULL); + if (state == DMA_COMPLETE) { + /* + * Disable RX interrupts to allow RX DMA completion + * callback to run. + */ + p->ier &= ~(UART_IER_RLSI | UART_IER_RDI); + serial_out(p, UART_IER, p->ier); + } + goto out; + } + + desc = dmaengine_prep_slave_single(dma->rxchan, dma->rx_addr, + dma->rx_size, DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) { + err = -EBUSY; + goto out; + } + + dma->rx_running = 1; + desc->callback = __dma_rx_complete; + desc->callback_param = p; + + dma->rx_cookie = dmaengine_submit(desc); + + /* + * Disable RX FIFO interrupt while RX DMA is enabled, else + * spurious interrupt may be raised when data is in the RX FIFO + * but is yet to be drained by DMA. + */ + if (priv->habit & UART_HAS_RHR_IT_DIS) { + reg = serial_in(p, UART_OMAP_IER2); + reg |= UART_OMAP_IER2_RHR_IT_DIS; + serial_out(p, UART_OMAP_IER2, reg); + } + + dma_async_issue_pending(dma->rxchan); +out: + spin_unlock_irqrestore(&priv->rx_dma_lock, flags); + return err; +} + +static int omap_8250_tx_dma(struct uart_8250_port *p); + +static void omap_8250_dma_tx_complete(void *param) +{ + struct uart_8250_port *p = param; + struct uart_8250_dma *dma = p->dma; + struct circ_buf *xmit = &p->port.state->xmit; + unsigned long flags; + bool en_thri = false; + struct omap8250_priv *priv = p->port.private_data; + + dma_sync_single_for_cpu(dma->txchan->device->dev, dma->tx_addr, + UART_XMIT_SIZE, DMA_TO_DEVICE); + + spin_lock_irqsave(&p->port.lock, flags); + + dma->tx_running = 0; + + xmit->tail += dma->tx_size; + xmit->tail &= UART_XMIT_SIZE - 1; + p->port.icount.tx += dma->tx_size; + + if (priv->delayed_restore) { + priv->delayed_restore = 0; + omap8250_restore_regs(p); + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&p->port); + + if (!uart_circ_empty(xmit) && !uart_tx_stopped(&p->port)) { + int ret; + + ret = omap_8250_tx_dma(p); + if (ret) + en_thri = true; + } else if (p->capabilities & UART_CAP_RPM) { + en_thri = true; + } + + if (en_thri) { + dma->tx_err = 1; + serial8250_set_THRI(p); + } + + spin_unlock_irqrestore(&p->port.lock, flags); +} + +static int omap_8250_tx_dma(struct uart_8250_port *p) +{ + struct uart_8250_dma *dma = p->dma; + struct omap8250_priv *priv = p->port.private_data; + struct circ_buf *xmit = &p->port.state->xmit; + struct dma_async_tx_descriptor *desc; + unsigned int skip_byte = 0; + int ret; + + if (dma->tx_running) + return 0; + if (uart_tx_stopped(&p->port) || uart_circ_empty(xmit)) { + + /* + * Even if no data, we need to return an error for the two cases + * below so serial8250_tx_chars() is invoked and properly clears + * THRI and/or runtime suspend. + */ + if (dma->tx_err || p->capabilities & UART_CAP_RPM) { + ret = -EBUSY; + goto err; + } + serial8250_clear_THRI(p); + return 0; + } + + dma->tx_size = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); + if (priv->habit & OMAP_DMA_TX_KICK) { + u8 tx_lvl; + + /* + * We need to put the first byte into the FIFO in order to start + * the DMA transfer. For transfers smaller than four bytes we + * don't bother doing DMA at all. It seem not matter if there + * are still bytes in the FIFO from the last transfer (in case + * we got here directly from omap_8250_dma_tx_complete()). Bytes + * leaving the FIFO seem not to trigger the DMA transfer. It is + * really the byte that we put into the FIFO. + * If the FIFO is already full then we most likely got here from + * omap_8250_dma_tx_complete(). And this means the DMA engine + * just completed its work. We don't have to wait the complete + * 86us at 115200,8n1 but around 60us (not to mention lower + * baudrates). So in that case we take the interrupt and try + * again with an empty FIFO. + */ + tx_lvl = serial_in(p, UART_OMAP_TX_LVL); + if (tx_lvl == p->tx_loadsz) { + ret = -EBUSY; + goto err; + } + if (dma->tx_size < 4) { + ret = -EINVAL; + goto err; + } + skip_byte = 1; + } + + desc = dmaengine_prep_slave_single(dma->txchan, + dma->tx_addr + xmit->tail + skip_byte, + dma->tx_size - skip_byte, DMA_MEM_TO_DEV, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) { + ret = -EBUSY; + goto err; + } + + dma->tx_running = 1; + + desc->callback = omap_8250_dma_tx_complete; + desc->callback_param = p; + + dma->tx_cookie = dmaengine_submit(desc); + + dma_sync_single_for_device(dma->txchan->device->dev, dma->tx_addr, + UART_XMIT_SIZE, DMA_TO_DEVICE); + + dma_async_issue_pending(dma->txchan); + if (dma->tx_err) + dma->tx_err = 0; + + serial8250_clear_THRI(p); + if (skip_byte) + serial_out(p, UART_TX, xmit->buf[xmit->tail]); + return 0; +err: + dma->tx_err = 1; + return ret; +} + +static bool handle_rx_dma(struct uart_8250_port *up, unsigned int iir) +{ + switch (iir & 0x3f) { + case UART_IIR_RLSI: + case UART_IIR_RX_TIMEOUT: + case UART_IIR_RDI: + omap_8250_rx_dma_flush(up); + return true; + } + return omap_8250_rx_dma(up); +} + +static unsigned char omap_8250_handle_rx_dma(struct uart_8250_port *up, + u8 iir, unsigned char status) +{ + if ((status & (UART_LSR_DR | UART_LSR_BI)) && + (iir & UART_IIR_RDI)) { + if (handle_rx_dma(up, iir)) { + status = serial8250_rx_chars(up, status); + omap_8250_rx_dma(up); + } + } + + return status; +} + +static void am654_8250_handle_rx_dma(struct uart_8250_port *up, u8 iir, + unsigned char status) +{ + /* + * Queue a new transfer if FIFO has data. + */ + if ((status & (UART_LSR_DR | UART_LSR_BI)) && + (up->ier & UART_IER_RDI)) { + omap_8250_rx_dma(up); + serial_out(up, UART_OMAP_EFR2, UART_OMAP_EFR2_TIMEOUT_BEHAVE); + } else if ((iir & 0x3f) == UART_IIR_RX_TIMEOUT) { + /* + * Disable RX timeout, read IIR to clear + * current timeout condition, clear EFR2 to + * periodic timeouts, re-enable interrupts. + */ + up->ier &= ~(UART_IER_RLSI | UART_IER_RDI); + serial_out(up, UART_IER, up->ier); + omap_8250_rx_dma_flush(up); + serial_in(up, UART_IIR); + serial_out(up, UART_OMAP_EFR2, 0x0); + up->ier |= UART_IER_RLSI | UART_IER_RDI; + serial_out(up, UART_IER, up->ier); + } +} + +/* + * This is mostly serial8250_handle_irq(). We have a slightly different DMA + * hoook for RX/TX and need different logic for them in the ISR. Therefore we + * use the default routine in the non-DMA case and this one for with DMA. + */ +static int omap_8250_dma_handle_irq(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + struct omap8250_priv *priv = up->port.private_data; + unsigned char status; + unsigned long flags; + u8 iir; + + serial8250_rpm_get(up); + + iir = serial_port_in(port, UART_IIR); + if (iir & UART_IIR_NO_INT) { + serial8250_rpm_put(up); + return IRQ_HANDLED; + } + + spin_lock_irqsave(&port->lock, flags); + + status = serial_port_in(port, UART_LSR); + + if ((iir & 0x3f) != UART_IIR_THRI) { + if (priv->habit & UART_HAS_EFR2) + am654_8250_handle_rx_dma(up, iir, status); + else + status = omap_8250_handle_rx_dma(up, iir, status); + } + + serial8250_modem_status(up); + if (status & UART_LSR_THRE && up->dma->tx_err) { + if (uart_tx_stopped(&up->port) || + uart_circ_empty(&up->port.state->xmit)) { + up->dma->tx_err = 0; + serial8250_tx_chars(up); + } else { + /* + * try again due to an earlier failer which + * might have been resolved by now. + */ + if (omap_8250_tx_dma(up)) + serial8250_tx_chars(up); + } + } + + uart_unlock_and_check_sysrq(port, flags); + serial8250_rpm_put(up); + return 1; +} + +static bool the_no_dma_filter_fn(struct dma_chan *chan, void *param) +{ + return false; +} + +#else + +static inline int omap_8250_rx_dma(struct uart_8250_port *p) +{ + return -EINVAL; +} +#endif + +static int omap8250_no_handle_irq(struct uart_port *port) +{ + /* IRQ has not been requested but handling irq? */ + WARN_ONCE(1, "Unexpected irq handling before port startup\n"); + return 0; +} + +static struct omap8250_dma_params am654_dma = { + .rx_size = SZ_2K, + .rx_trigger = 1, + .tx_trigger = TX_TRIGGER, +}; + +static struct omap8250_dma_params am33xx_dma = { + .rx_size = RX_TRIGGER, + .rx_trigger = RX_TRIGGER, + .tx_trigger = TX_TRIGGER, +}; + +static struct omap8250_platdata am654_platdata = { + .dma_params = &am654_dma, + .habit = UART_HAS_EFR2 | UART_HAS_RHR_IT_DIS | + UART_RX_TIMEOUT_QUIRK, +}; + +static struct omap8250_platdata am33xx_platdata = { + .dma_params = &am33xx_dma, + .habit = OMAP_DMA_TX_KICK | UART_ERRATA_CLOCK_DISABLE, +}; + +static struct omap8250_platdata omap4_platdata = { + .dma_params = &am33xx_dma, + .habit = UART_ERRATA_CLOCK_DISABLE, +}; + +static const struct of_device_id omap8250_dt_ids[] = { + { .compatible = "ti,am654-uart", .data = &am654_platdata, }, + { .compatible = "ti,omap2-uart" }, + { .compatible = "ti,omap3-uart" }, + { .compatible = "ti,omap4-uart", .data = &omap4_platdata, }, + { .compatible = "ti,am3352-uart", .data = &am33xx_platdata, }, + { .compatible = "ti,am4372-uart", .data = &am33xx_platdata, }, + { .compatible = "ti,dra742-uart", .data = &omap4_platdata, }, + {}, +}; +MODULE_DEVICE_TABLE(of, omap8250_dt_ids); + +static int omap8250_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct omap8250_priv *priv; + const struct omap8250_platdata *pdata; + struct uart_8250_port up; + struct resource *regs; + void __iomem *membase; + int irq, ret; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!regs) { + dev_err(&pdev->dev, "missing registers\n"); + return -EINVAL; + } + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + membase = devm_ioremap(&pdev->dev, regs->start, + resource_size(regs)); + if (!membase) + return -ENODEV; + + memset(&up, 0, sizeof(up)); + up.port.dev = &pdev->dev; + up.port.mapbase = regs->start; + up.port.membase = membase; + up.port.irq = irq; + /* + * It claims to be 16C750 compatible however it is a little different. + * It has EFR and has no FCR7_64byte bit. The AFE (which it claims to + * have) is enabled via EFR instead of MCR. The type is set here 8250 + * just to get things going. UNKNOWN does not work for a few reasons and + * we don't need our own type since we don't use 8250's set_termios() + * or pm callback. + */ + up.port.type = PORT_8250; + up.port.iotype = UPIO_MEM; + up.port.flags = UPF_FIXED_PORT | UPF_FIXED_TYPE | UPF_SOFT_FLOW | + UPF_HARD_FLOW; + up.port.private_data = priv; + + up.port.regshift = OMAP_UART_REGSHIFT; + up.port.fifosize = 64; + up.tx_loadsz = 64; + up.capabilities = UART_CAP_FIFO; +#ifdef CONFIG_PM + /* + * Runtime PM is mostly transparent. However to do it right we need to a + * TX empty interrupt before we can put the device to auto idle. So if + * PM is not enabled we don't add that flag and can spare that one extra + * interrupt in the TX path. + */ + up.capabilities |= UART_CAP_RPM; +#endif + up.port.set_termios = omap_8250_set_termios; + up.port.set_mctrl = omap8250_set_mctrl; + up.port.pm = omap_8250_pm; + up.port.startup = omap_8250_startup; + up.port.shutdown = omap_8250_shutdown; + up.port.throttle = omap_8250_throttle; + up.port.unthrottle = omap_8250_unthrottle; + up.port.rs485_config = serial8250_em485_config; + up.rs485_start_tx = serial8250_em485_start_tx; + up.rs485_stop_tx = serial8250_em485_stop_tx; + up.port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_8250_CONSOLE); + + ret = of_alias_get_id(np, "serial"); + if (ret < 0) { + dev_err(&pdev->dev, "failed to get alias\n"); + return ret; + } + up.port.line = ret; + + if (of_property_read_u32(np, "clock-frequency", &up.port.uartclk)) { + struct clk *clk; + + clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(clk)) { + if (PTR_ERR(clk) == -EPROBE_DEFER) + return -EPROBE_DEFER; + } else { + up.port.uartclk = clk_get_rate(clk); + } + } + + if (of_property_read_u32(np, "overrun-throttle-ms", + &up.overrun_backoff_time_ms) != 0) + up.overrun_backoff_time_ms = 0; + + priv->wakeirq = irq_of_parse_and_map(np, 1); + + pdata = of_device_get_match_data(&pdev->dev); + if (pdata) + priv->habit |= pdata->habit; + + if (!up.port.uartclk) { + up.port.uartclk = DEFAULT_CLK_SPEED; + dev_warn(&pdev->dev, + "No clock speed specified: using default: %d\n", + DEFAULT_CLK_SPEED); + } + + priv->membase = membase; + priv->line = -ENODEV; + priv->latency = PM_QOS_CPU_LATENCY_DEFAULT_VALUE; + priv->calc_latency = PM_QOS_CPU_LATENCY_DEFAULT_VALUE; + cpu_latency_qos_add_request(&priv->pm_qos_request, priv->latency); + INIT_WORK(&priv->qos_work, omap8250_uart_qos_work); + + spin_lock_init(&priv->rx_dma_lock); + + platform_set_drvdata(pdev, priv); + + device_init_wakeup(&pdev->dev, true); + pm_runtime_enable(&pdev->dev); + pm_runtime_use_autosuspend(&pdev->dev); + + /* + * Disable runtime PM until autosuspend delay unless specifically + * enabled by the user via sysfs. This is the historic way to + * prevent an unsafe default policy with lossy characters on wake-up. + * For serdev devices this is not needed, the policy can be managed by + * the serdev driver. + */ + if (!of_get_available_child_count(pdev->dev.of_node)) + pm_runtime_set_autosuspend_delay(&pdev->dev, -1); + + pm_runtime_irq_safe(&pdev->dev); + + pm_runtime_get_sync(&pdev->dev); + + omap_serial_fill_features_erratas(&up, priv); + up.port.handle_irq = omap8250_no_handle_irq; + priv->rx_trigger = RX_TRIGGER; + priv->tx_trigger = TX_TRIGGER; +#ifdef CONFIG_SERIAL_8250_DMA + /* + * Oh DMA support. If there are no DMA properties in the DT then + * we will fall back to a generic DMA channel which does not + * really work here. To ensure that we do not get a generic DMA + * channel assigned, we have the the_no_dma_filter_fn() here. + * To avoid "failed to request DMA" messages we check for DMA + * properties in DT. + */ + ret = of_property_count_strings(np, "dma-names"); + if (ret == 2) { + struct omap8250_dma_params *dma_params = NULL; + + up.dma = &priv->omap8250_dma; + up.dma->fn = the_no_dma_filter_fn; + up.dma->tx_dma = omap_8250_tx_dma; + up.dma->rx_dma = omap_8250_rx_dma; + if (pdata) + dma_params = pdata->dma_params; + + if (dma_params) { + up.dma->rx_size = dma_params->rx_size; + up.dma->rxconf.src_maxburst = dma_params->rx_trigger; + up.dma->txconf.dst_maxburst = dma_params->tx_trigger; + priv->rx_trigger = dma_params->rx_trigger; + priv->tx_trigger = dma_params->tx_trigger; + } else { + up.dma->rx_size = RX_TRIGGER; + up.dma->rxconf.src_maxburst = RX_TRIGGER; + up.dma->txconf.dst_maxburst = TX_TRIGGER; + } + } +#endif + ret = serial8250_register_8250_port(&up); + if (ret < 0) { + dev_err(&pdev->dev, "unable to register 8250 port\n"); + goto err; + } + priv->line = ret; + pm_runtime_mark_last_busy(&pdev->dev); + pm_runtime_put_autosuspend(&pdev->dev); + return 0; +err: + pm_runtime_dont_use_autosuspend(&pdev->dev); + pm_runtime_put_sync(&pdev->dev); + flush_work(&priv->qos_work); + pm_runtime_disable(&pdev->dev); + cpu_latency_qos_remove_request(&priv->pm_qos_request); + return ret; +} + +static int omap8250_remove(struct platform_device *pdev) +{ + struct omap8250_priv *priv = platform_get_drvdata(pdev); + int err; + + err = pm_runtime_resume_and_get(&pdev->dev); + if (err) + dev_err(&pdev->dev, "Failed to resume hardware\n"); + + serial8250_unregister_port(priv->line); + priv->line = -ENODEV; + pm_runtime_dont_use_autosuspend(&pdev->dev); + pm_runtime_put_sync(&pdev->dev); + flush_work(&priv->qos_work); + pm_runtime_disable(&pdev->dev); + cpu_latency_qos_remove_request(&priv->pm_qos_request); + device_init_wakeup(&pdev->dev, false); + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int omap8250_prepare(struct device *dev) +{ + struct omap8250_priv *priv = dev_get_drvdata(dev); + + if (!priv) + return 0; + priv->is_suspending = true; + return 0; +} + +static void omap8250_complete(struct device *dev) +{ + struct omap8250_priv *priv = dev_get_drvdata(dev); + + if (!priv) + return; + priv->is_suspending = false; +} + +static int omap8250_suspend(struct device *dev) +{ + struct omap8250_priv *priv = dev_get_drvdata(dev); + struct uart_8250_port *up = serial8250_get_port(priv->line); + int err = 0; + + serial8250_suspend_port(priv->line); + + err = pm_runtime_resume_and_get(dev); + if (err) + return err; + if (!device_may_wakeup(dev)) + priv->wer = 0; + serial_out(up, UART_OMAP_WER, priv->wer); + if (uart_console(&up->port) && console_suspend_enabled) + err = pm_runtime_force_suspend(dev); + flush_work(&priv->qos_work); + + return err; +} + +static int omap8250_resume(struct device *dev) +{ + struct omap8250_priv *priv = dev_get_drvdata(dev); + struct uart_8250_port *up = serial8250_get_port(priv->line); + int err; + + if (uart_console(&up->port) && console_suspend_enabled) { + err = pm_runtime_force_resume(dev); + if (err) + return err; + } + + serial8250_resume_port(priv->line); + /* Paired with pm_runtime_resume_and_get() in omap8250_suspend() */ + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + + return 0; +} +#else +#define omap8250_prepare NULL +#define omap8250_complete NULL +#endif + +#ifdef CONFIG_PM +static int omap8250_lost_context(struct uart_8250_port *up) +{ + u32 val; + + val = serial_in(up, UART_OMAP_SCR); + /* + * If we lose context, then SCR is set to its reset value of zero. + * After set_termios() we set bit 3 of SCR (TX_EMPTY_CTL_IT) to 1, + * among other bits, to never set the register back to zero again. + */ + if (!val) + return 1; + return 0; +} + +/* TODO: in future, this should happen via API in drivers/reset/ */ +static int omap8250_soft_reset(struct device *dev) +{ + struct omap8250_priv *priv = dev_get_drvdata(dev); + int timeout = 100; + int sysc; + int syss; + + /* + * At least on omap4, unused uarts may not idle after reset without + * a basic scr dma configuration even with no dma in use. The + * module clkctrl status bits will be 1 instead of 3 blocking idle + * for the whole clockdomain. The softreset below will clear scr, + * and we restore it on resume so this is safe to do on all SoCs + * needing omap8250_soft_reset() quirk. Do it in two writes as + * recommended in the comment for omap8250_update_scr(). + */ + uart_write(priv, UART_OMAP_SCR, OMAP_UART_SCR_DMAMODE_1); + uart_write(priv, UART_OMAP_SCR, + OMAP_UART_SCR_DMAMODE_1 | OMAP_UART_SCR_DMAMODE_CTL); + + sysc = uart_read(priv, UART_OMAP_SYSC); + + /* softreset the UART */ + sysc |= OMAP_UART_SYSC_SOFTRESET; + uart_write(priv, UART_OMAP_SYSC, sysc); + + /* By experiments, 1us enough for reset complete on AM335x */ + do { + udelay(1); + syss = uart_read(priv, UART_OMAP_SYSS); + } while (--timeout && !(syss & OMAP_UART_SYSS_RESETDONE)); + + if (!timeout) { + dev_err(dev, "timed out waiting for reset done\n"); + return -ETIMEDOUT; + } + + return 0; +} + +static int omap8250_runtime_suspend(struct device *dev) +{ + struct omap8250_priv *priv = dev_get_drvdata(dev); + struct uart_8250_port *up = NULL; + + if (priv->line >= 0) + up = serial8250_get_port(priv->line); + + if (priv->habit & UART_ERRATA_CLOCK_DISABLE) { + int ret; + + ret = omap8250_soft_reset(dev); + if (ret) + return ret; + + if (up) { + /* Restore to UART mode after reset (for wakeup) */ + omap8250_update_mdr1(up, priv); + /* Restore wakeup enable register */ + serial_out(up, UART_OMAP_WER, priv->wer); + } + } + + if (up && up->dma && up->dma->rxchan) + omap_8250_rx_dma_flush(up); + + priv->latency = PM_QOS_CPU_LATENCY_DEFAULT_VALUE; + schedule_work(&priv->qos_work); + + return 0; +} + +static int omap8250_runtime_resume(struct device *dev) +{ + struct omap8250_priv *priv = dev_get_drvdata(dev); + struct uart_8250_port *up = NULL; + + if (priv->line >= 0) + up = serial8250_get_port(priv->line); + + if (up && omap8250_lost_context(up)) + omap8250_restore_regs(up); + + if (up && up->dma && up->dma->rxchan && !(priv->habit & UART_HAS_EFR2)) + omap_8250_rx_dma(up); + + priv->latency = priv->calc_latency; + schedule_work(&priv->qos_work); + return 0; +} +#endif + +#ifdef CONFIG_SERIAL_8250_OMAP_TTYO_FIXUP +static int __init omap8250_console_fixup(void) +{ + char *omap_str; + char *options; + u8 idx; + + if (strstr(boot_command_line, "console=ttyS")) + /* user set a ttyS based name for the console */ + return 0; + + omap_str = strstr(boot_command_line, "console=ttyO"); + if (!omap_str) + /* user did not set ttyO based console, so we don't care */ + return 0; + + omap_str += 12; + if ('0' <= *omap_str && *omap_str <= '9') + idx = *omap_str - '0'; + else + return 0; + + omap_str++; + if (omap_str[0] == ',') { + omap_str++; + options = omap_str; + } else { + options = NULL; + } + + add_preferred_console("ttyS", idx, options); + pr_err("WARNING: Your 'console=ttyO%d' has been replaced by 'ttyS%d'\n", + idx, idx); + pr_err("This ensures that you still see kernel messages. Please\n"); + pr_err("update your kernel commandline.\n"); + return 0; +} +console_initcall(omap8250_console_fixup); +#endif + +static const struct dev_pm_ops omap8250_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(omap8250_suspend, omap8250_resume) + SET_RUNTIME_PM_OPS(omap8250_runtime_suspend, + omap8250_runtime_resume, NULL) + .prepare = omap8250_prepare, + .complete = omap8250_complete, +}; + +static struct platform_driver omap8250_platform_driver = { + .driver = { + .name = "omap8250", + .pm = &omap8250_dev_pm_ops, + .of_match_table = omap8250_dt_ids, + }, + .probe = omap8250_probe, + .remove = omap8250_remove, +}; +module_platform_driver(omap8250_platform_driver); + +MODULE_AUTHOR("Sebastian Andrzej Siewior"); +MODULE_DESCRIPTION("OMAP 8250 Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c new file mode 100644 index 000000000..89b14f554 --- /dev/null +++ b/drivers/tty/serial/8250/8250_pci.c @@ -0,0 +1,5953 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Probe module for 8250/16550-type PCI serial ports. + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright (C) 2001 Russell King, All Rights Reserved. + */ +#undef DEBUG +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "8250.h" + +/* + * init function returns: + * > 0 - number of ports + * = 0 - use board->num_ports + * < 0 - error + */ +struct pci_serial_quirk { + u32 vendor; + u32 device; + u32 subvendor; + u32 subdevice; + int (*probe)(struct pci_dev *dev); + int (*init)(struct pci_dev *dev); + int (*setup)(struct serial_private *, + const struct pciserial_board *, + struct uart_8250_port *, int); + void (*exit)(struct pci_dev *dev); +}; + +struct f815xxa_data { + spinlock_t lock; + int idx; +}; + +struct serial_private { + struct pci_dev *dev; + unsigned int nr; + struct pci_serial_quirk *quirk; + const struct pciserial_board *board; + int line[]; +}; + +#define PCI_DEVICE_ID_HPE_PCI_SERIAL 0x37e + +static const struct pci_device_id pci_use_msi[] = { + { PCI_DEVICE_SUB(PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900, + 0xA000, 0x1000) }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9912, + 0xA000, 0x1000) }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9922, + 0xA000, 0x1000) }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_HP_3PAR, PCI_DEVICE_ID_HPE_PCI_SERIAL, + PCI_ANY_ID, PCI_ANY_ID) }, + { } +}; + +static int pci_default_setup(struct serial_private*, + const struct pciserial_board*, struct uart_8250_port *, int); + +static void moan_device(const char *str, struct pci_dev *dev) +{ + pci_err(dev, "%s\n" + "Please send the output of lspci -vv, this\n" + "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n" + "manufacturer and name of serial board or\n" + "modem board to .\n", + str, dev->vendor, dev->device, + dev->subsystem_vendor, dev->subsystem_device); +} + +static int +setup_port(struct serial_private *priv, struct uart_8250_port *port, + u8 bar, unsigned int offset, int regshift) +{ + struct pci_dev *dev = priv->dev; + + if (bar >= PCI_STD_NUM_BARS) + return -EINVAL; + + if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) { + if (!pcim_iomap(dev, bar, 0) && !pcim_iomap_table(dev)) + return -ENOMEM; + + port->port.iotype = UPIO_MEM; + port->port.iobase = 0; + port->port.mapbase = pci_resource_start(dev, bar) + offset; + port->port.membase = pcim_iomap_table(dev)[bar] + offset; + port->port.regshift = regshift; + } else { + port->port.iotype = UPIO_PORT; + port->port.iobase = pci_resource_start(dev, bar) + offset; + port->port.mapbase = 0; + port->port.membase = NULL; + port->port.regshift = 0; + } + return 0; +} + +/* + * ADDI-DATA GmbH communication cards + */ +static int addidata_apci7800_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + unsigned int bar = 0, offset = board->first_offset; + bar = FL_GET_BASE(board->flags); + + if (idx < 2) { + offset += idx * board->uart_offset; + } else if ((idx >= 2) && (idx < 4)) { + bar += 1; + offset += ((idx - 2) * board->uart_offset); + } else if ((idx >= 4) && (idx < 6)) { + bar += 2; + offset += ((idx - 4) * board->uart_offset); + } else if (idx >= 6) { + bar += 3; + offset += ((idx - 6) * board->uart_offset); + } + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + +/* + * AFAVLAB uses a different mixture of BARs and offsets + * Not that ugly ;) -- HW + */ +static int +afavlab_setup(struct serial_private *priv, const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + unsigned int bar, offset = board->first_offset; + + bar = FL_GET_BASE(board->flags); + if (idx < 4) + bar += idx; + else { + bar = 4; + offset += (idx - 4) * board->uart_offset; + } + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + +/* + * HP's Remote Management Console. The Diva chip came in several + * different versions. N-class, L2000 and A500 have two Diva chips, each + * with 3 UARTs (the third UART on the second chip is unused). Superdome + * and Keystone have one Diva chip with 3 UARTs. Some later machines have + * one Diva chip, but it has been expanded to 5 UARTs. + */ +static int pci_hp_diva_init(struct pci_dev *dev) +{ + int rc = 0; + + switch (dev->subsystem_device) { + case PCI_DEVICE_ID_HP_DIVA_TOSCA1: + case PCI_DEVICE_ID_HP_DIVA_HALFDOME: + case PCI_DEVICE_ID_HP_DIVA_KEYSTONE: + case PCI_DEVICE_ID_HP_DIVA_EVEREST: + rc = 3; + break; + case PCI_DEVICE_ID_HP_DIVA_TOSCA2: + rc = 2; + break; + case PCI_DEVICE_ID_HP_DIVA_MAESTRO: + rc = 4; + break; + case PCI_DEVICE_ID_HP_DIVA_POWERBAR: + case PCI_DEVICE_ID_HP_DIVA_HURRICANE: + rc = 1; + break; + } + + return rc; +} + +/* + * HP's Diva chip puts the 4th/5th serial port further out, and + * some serial ports are supposed to be hidden on certain models. + */ +static int +pci_hp_diva_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + unsigned int offset = board->first_offset; + unsigned int bar = FL_GET_BASE(board->flags); + + switch (priv->dev->subsystem_device) { + case PCI_DEVICE_ID_HP_DIVA_MAESTRO: + if (idx == 3) + idx++; + break; + case PCI_DEVICE_ID_HP_DIVA_EVEREST: + if (idx > 0) + idx++; + if (idx > 2) + idx++; + break; + } + if (idx > 2) + offset = 0x18; + + offset += idx * board->uart_offset; + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + +/* + * Added for EKF Intel i960 serial boards + */ +static int pci_inteli960ni_init(struct pci_dev *dev) +{ + u32 oldval; + + if (!(dev->subsystem_device & 0x1000)) + return -ENODEV; + + /* is firmware started? */ + pci_read_config_dword(dev, 0x44, &oldval); + if (oldval == 0x00001000L) { /* RESET value */ + pci_dbg(dev, "Local i960 firmware missing\n"); + return -ENODEV; + } + return 0; +} + +/* + * Some PCI serial cards using the PLX 9050 PCI interface chip require + * that the card interrupt be explicitly enabled or disabled. This + * seems to be mainly needed on card using the PLX which also use I/O + * mapped memory. + */ +static int pci_plx9050_init(struct pci_dev *dev) +{ + u8 irq_config; + void __iomem *p; + + if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) { + moan_device("no memory in bar 0", dev); + return 0; + } + + irq_config = 0x41; + if (dev->vendor == PCI_VENDOR_ID_PANACOM || + dev->subsystem_vendor == PCI_SUBVENDOR_ID_EXSYS) + irq_config = 0x43; + + if ((dev->vendor == PCI_VENDOR_ID_PLX) && + (dev->device == PCI_DEVICE_ID_PLX_ROMULUS)) + /* + * As the megawolf cards have the int pins active + * high, and have 2 UART chips, both ints must be + * enabled on the 9050. Also, the UARTS are set in + * 16450 mode by default, so we have to enable the + * 16C950 'enhanced' mode so that we can use the + * deep FIFOs + */ + irq_config = 0x5b; + /* + * enable/disable interrupts + */ + p = ioremap(pci_resource_start(dev, 0), 0x80); + if (p == NULL) + return -ENOMEM; + writel(irq_config, p + 0x4c); + + /* + * Read the register back to ensure that it took effect. + */ + readl(p + 0x4c); + iounmap(p); + + return 0; +} + +static void pci_plx9050_exit(struct pci_dev *dev) +{ + u8 __iomem *p; + + if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) + return; + + /* + * disable interrupts + */ + p = ioremap(pci_resource_start(dev, 0), 0x80); + if (p != NULL) { + writel(0, p + 0x4c); + + /* + * Read the register back to ensure that it took effect. + */ + readl(p + 0x4c); + iounmap(p); + } +} + +#define NI8420_INT_ENABLE_REG 0x38 +#define NI8420_INT_ENABLE_BIT 0x2000 + +static void pci_ni8420_exit(struct pci_dev *dev) +{ + void __iomem *p; + unsigned int bar = 0; + + if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { + moan_device("no memory in bar", dev); + return; + } + + p = pci_ioremap_bar(dev, bar); + if (p == NULL) + return; + + /* Disable the CPU Interrupt */ + writel(readl(p + NI8420_INT_ENABLE_REG) & ~(NI8420_INT_ENABLE_BIT), + p + NI8420_INT_ENABLE_REG); + iounmap(p); +} + + +/* MITE registers */ +#define MITE_IOWBSR1 0xc4 +#define MITE_IOWCR1 0xf4 +#define MITE_LCIMR1 0x08 +#define MITE_LCIMR2 0x10 + +#define MITE_LCIMR2_CLR_CPU_IE (1 << 30) + +static void pci_ni8430_exit(struct pci_dev *dev) +{ + void __iomem *p; + unsigned int bar = 0; + + if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { + moan_device("no memory in bar", dev); + return; + } + + p = pci_ioremap_bar(dev, bar); + if (p == NULL) + return; + + /* Disable the CPU Interrupt */ + writel(MITE_LCIMR2_CLR_CPU_IE, p + MITE_LCIMR2); + iounmap(p); +} + +/* SBS Technologies Inc. PMC-OCTPRO and P-OCTAL cards */ +static int +sbs_setup(struct serial_private *priv, const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + unsigned int bar, offset = board->first_offset; + + bar = 0; + + if (idx < 4) { + /* first four channels map to 0, 0x100, 0x200, 0x300 */ + offset += idx * board->uart_offset; + } else if (idx < 8) { + /* last four channels map to 0x1000, 0x1100, 0x1200, 0x1300 */ + offset += idx * board->uart_offset + 0xC00; + } else /* we have only 8 ports on PMC-OCTALPRO */ + return 1; + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + +/* +* This does initialization for PMC OCTALPRO cards: +* maps the device memory, resets the UARTs (needed, bc +* if the module is removed and inserted again, the card +* is in the sleep mode) and enables global interrupt. +*/ + +/* global control register offset for SBS PMC-OctalPro */ +#define OCT_REG_CR_OFF 0x500 + +static int sbs_init(struct pci_dev *dev) +{ + u8 __iomem *p; + + p = pci_ioremap_bar(dev, 0); + + if (p == NULL) + return -ENOMEM; + /* Set bit-4 Control Register (UART RESET) in to reset the uarts */ + writeb(0x10, p + OCT_REG_CR_OFF); + udelay(50); + writeb(0x0, p + OCT_REG_CR_OFF); + + /* Set bit-2 (INTENABLE) of Control Register */ + writeb(0x4, p + OCT_REG_CR_OFF); + iounmap(p); + + return 0; +} + +/* + * Disables the global interrupt of PMC-OctalPro + */ + +static void sbs_exit(struct pci_dev *dev) +{ + u8 __iomem *p; + + p = pci_ioremap_bar(dev, 0); + /* FIXME: What if resource_len < OCT_REG_CR_OFF */ + if (p != NULL) + writeb(0, p + OCT_REG_CR_OFF); + iounmap(p); +} + +/* + * SIIG serial cards have an PCI interface chip which also controls + * the UART clocking frequency. Each UART can be clocked independently + * (except cards equipped with 4 UARTs) and initial clocking settings + * are stored in the EEPROM chip. It can cause problems because this + * version of serial driver doesn't support differently clocked UART's + * on single PCI card. To prevent this, initialization functions set + * high frequency clocking for all UART's on given card. It is safe (I + * hope) because it doesn't touch EEPROM settings to prevent conflicts + * with other OSes (like M$ DOS). + * + * SIIG support added by Andrey Panin , 10/1999 + * + * There is two family of SIIG serial cards with different PCI + * interface chip and different configuration methods: + * - 10x cards have control registers in IO and/or memory space; + * - 20x cards have control registers in standard PCI configuration space. + * + * Note: all 10x cards have PCI device ids 0x10.. + * all 20x cards have PCI device ids 0x20.. + * + * There are also Quartet Serial cards which use Oxford Semiconductor + * 16954 quad UART PCI chip clocked by 18.432 MHz quartz. + * + * Note: some SIIG cards are probed by the parport_serial object. + */ + +#define PCI_DEVICE_ID_SIIG_1S_10x (PCI_DEVICE_ID_SIIG_1S_10x_550 & 0xfffc) +#define PCI_DEVICE_ID_SIIG_2S_10x (PCI_DEVICE_ID_SIIG_2S_10x_550 & 0xfff8) + +static int pci_siig10x_init(struct pci_dev *dev) +{ + u16 data; + void __iomem *p; + + switch (dev->device & 0xfff8) { + case PCI_DEVICE_ID_SIIG_1S_10x: /* 1S */ + data = 0xffdf; + break; + case PCI_DEVICE_ID_SIIG_2S_10x: /* 2S, 2S1P */ + data = 0xf7ff; + break; + default: /* 1S1P, 4S */ + data = 0xfffb; + break; + } + + p = ioremap(pci_resource_start(dev, 0), 0x80); + if (p == NULL) + return -ENOMEM; + + writew(readw(p + 0x28) & data, p + 0x28); + readw(p + 0x28); + iounmap(p); + return 0; +} + +#define PCI_DEVICE_ID_SIIG_2S_20x (PCI_DEVICE_ID_SIIG_2S_20x_550 & 0xfffc) +#define PCI_DEVICE_ID_SIIG_2S1P_20x (PCI_DEVICE_ID_SIIG_2S1P_20x_550 & 0xfffc) + +static int pci_siig20x_init(struct pci_dev *dev) +{ + u8 data; + + /* Change clock frequency for the first UART. */ + pci_read_config_byte(dev, 0x6f, &data); + pci_write_config_byte(dev, 0x6f, data & 0xef); + + /* If this card has 2 UART, we have to do the same with second UART. */ + if (((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S_20x) || + ((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S1P_20x)) { + pci_read_config_byte(dev, 0x73, &data); + pci_write_config_byte(dev, 0x73, data & 0xef); + } + return 0; +} + +static int pci_siig_init(struct pci_dev *dev) +{ + unsigned int type = dev->device & 0xff00; + + if (type == 0x1000) + return pci_siig10x_init(dev); + else if (type == 0x2000) + return pci_siig20x_init(dev); + + moan_device("Unknown SIIG card", dev); + return -ENODEV; +} + +static int pci_siig_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + unsigned int bar = FL_GET_BASE(board->flags) + idx, offset = 0; + + if (idx > 3) { + bar = 4; + offset = (idx - 4) * 8; + } + + return setup_port(priv, port, bar, offset, 0); +} + +/* + * Timedia has an explosion of boards, and to avoid the PCI table from + * growing *huge*, we use this function to collapse some 70 entries + * in the PCI table into one, for sanity's and compactness's sake. + */ +static const unsigned short timedia_single_port[] = { + 0x4025, 0x4027, 0x4028, 0x5025, 0x5027, 0 +}; + +static const unsigned short timedia_dual_port[] = { + 0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085, + 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079, + 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079, + 0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079, + 0xD079, 0 +}; + +static const unsigned short timedia_quad_port[] = { + 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157, + 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159, + 0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056, + 0xB157, 0 +}; + +static const unsigned short timedia_eight_port[] = { + 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166, + 0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0 +}; + +static const struct timedia_struct { + int num; + const unsigned short *ids; +} timedia_data[] = { + { 1, timedia_single_port }, + { 2, timedia_dual_port }, + { 4, timedia_quad_port }, + { 8, timedia_eight_port } +}; + +/* + * There are nearly 70 different Timedia/SUNIX PCI serial devices. Instead of + * listing them individually, this driver merely grabs them all with + * PCI_ANY_ID. Some of these devices, however, also feature a parallel port, + * and should be left free to be claimed by parport_serial instead. + */ +static int pci_timedia_probe(struct pci_dev *dev) +{ + /* + * Check the third digit of the subdevice ID + * (0,2,3,5,6: serial only -- 7,8,9: serial + parallel) + */ + if ((dev->subsystem_device & 0x00f0) >= 0x70) { + pci_info(dev, "ignoring Timedia subdevice %04x for parport_serial\n", + dev->subsystem_device); + return -ENODEV; + } + + return 0; +} + +static int pci_timedia_init(struct pci_dev *dev) +{ + const unsigned short *ids; + int i, j; + + for (i = 0; i < ARRAY_SIZE(timedia_data); i++) { + ids = timedia_data[i].ids; + for (j = 0; ids[j]; j++) + if (dev->subsystem_device == ids[j]) + return timedia_data[i].num; + } + return 0; +} + +/* + * Timedia/SUNIX uses a mixture of BARs and offsets + * Ugh, this is ugly as all hell --- TYT + */ +static int +pci_timedia_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + unsigned int bar = 0, offset = board->first_offset; + + switch (idx) { + case 0: + bar = 0; + break; + case 1: + offset = board->uart_offset; + bar = 0; + break; + case 2: + bar = 1; + break; + case 3: + offset = board->uart_offset; + fallthrough; + case 4: /* BAR 2 */ + case 5: /* BAR 3 */ + case 6: /* BAR 4 */ + case 7: /* BAR 5 */ + bar = idx - 2; + } + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + +/* + * Some Titan cards are also a little weird + */ +static int +titan_400l_800l_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + unsigned int bar, offset = board->first_offset; + + switch (idx) { + case 0: + bar = 1; + break; + case 1: + bar = 2; + break; + default: + bar = 4; + offset = (idx - 2) * board->uart_offset; + } + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + +static int pci_xircom_init(struct pci_dev *dev) +{ + msleep(100); + return 0; +} + +static int pci_ni8420_init(struct pci_dev *dev) +{ + void __iomem *p; + unsigned int bar = 0; + + if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { + moan_device("no memory in bar", dev); + return 0; + } + + p = pci_ioremap_bar(dev, bar); + if (p == NULL) + return -ENOMEM; + + /* Enable CPU Interrupt */ + writel(readl(p + NI8420_INT_ENABLE_REG) | NI8420_INT_ENABLE_BIT, + p + NI8420_INT_ENABLE_REG); + + iounmap(p); + return 0; +} + +#define MITE_IOWBSR1_WSIZE 0xa +#define MITE_IOWBSR1_WIN_OFFSET 0x800 +#define MITE_IOWBSR1_WENAB (1 << 7) +#define MITE_LCIMR1_IO_IE_0 (1 << 24) +#define MITE_LCIMR2_SET_CPU_IE (1 << 31) +#define MITE_IOWCR1_RAMSEL_MASK 0xfffffffe + +static int pci_ni8430_init(struct pci_dev *dev) +{ + void __iomem *p; + struct pci_bus_region region; + u32 device_window; + unsigned int bar = 0; + + if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { + moan_device("no memory in bar", dev); + return 0; + } + + p = pci_ioremap_bar(dev, bar); + if (p == NULL) + return -ENOMEM; + + /* + * Set device window address and size in BAR0, while acknowledging that + * the resource structure may contain a translated address that differs + * from the address the device responds to. + */ + pcibios_resource_to_bus(dev->bus, ®ion, &dev->resource[bar]); + device_window = ((region.start + MITE_IOWBSR1_WIN_OFFSET) & 0xffffff00) + | MITE_IOWBSR1_WENAB | MITE_IOWBSR1_WSIZE; + writel(device_window, p + MITE_IOWBSR1); + + /* Set window access to go to RAMSEL IO address space */ + writel((readl(p + MITE_IOWCR1) & MITE_IOWCR1_RAMSEL_MASK), + p + MITE_IOWCR1); + + /* Enable IO Bus Interrupt 0 */ + writel(MITE_LCIMR1_IO_IE_0, p + MITE_LCIMR1); + + /* Enable CPU Interrupt */ + writel(MITE_LCIMR2_SET_CPU_IE, p + MITE_LCIMR2); + + iounmap(p); + return 0; +} + +/* UART Port Control Register */ +#define NI8430_PORTCON 0x0f +#define NI8430_PORTCON_TXVR_ENABLE (1 << 3) + +static int +pci_ni8430_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + struct pci_dev *dev = priv->dev; + void __iomem *p; + unsigned int bar, offset = board->first_offset; + + if (idx >= board->num_ports) + return 1; + + bar = FL_GET_BASE(board->flags); + offset += idx * board->uart_offset; + + p = pci_ioremap_bar(dev, bar); + if (!p) + return -ENOMEM; + + /* enable the transceiver */ + writeb(readb(p + offset + NI8430_PORTCON) | NI8430_PORTCON_TXVR_ENABLE, + p + offset + NI8430_PORTCON); + + iounmap(p); + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + +static int pci_netmos_9900_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + unsigned int bar; + + if ((priv->dev->device != PCI_DEVICE_ID_NETMOS_9865) && + (priv->dev->subsystem_device & 0xff00) == 0x3000) { + /* netmos apparently orders BARs by datasheet layout, so serial + * ports get BARs 0 and 3 (or 1 and 4 for memmapped) + */ + bar = 3 * idx; + + return setup_port(priv, port, bar, 0, board->reg_shift); + } else { + return pci_default_setup(priv, board, port, idx); + } +} + +/* the 99xx series comes with a range of device IDs and a variety + * of capabilities: + * + * 9900 has varying capabilities and can cascade to sub-controllers + * (cascading should be purely internal) + * 9904 is hardwired with 4 serial ports + * 9912 and 9922 are hardwired with 2 serial ports + */ +static int pci_netmos_9900_numports(struct pci_dev *dev) +{ + unsigned int c = dev->class; + unsigned int pi; + unsigned short sub_serports; + + pi = c & 0xff; + + if (pi == 2) + return 1; + + if ((pi == 0) && (dev->device == PCI_DEVICE_ID_NETMOS_9900)) { + /* two possibilities: 0x30ps encodes number of parallel and + * serial ports, or 0x1000 indicates *something*. This is not + * immediately obvious, since the 2s1p+4s configuration seems + * to offer all functionality on functions 0..2, while still + * advertising the same function 3 as the 4s+2s1p config. + */ + sub_serports = dev->subsystem_device & 0xf; + if (sub_serports > 0) + return sub_serports; + + pci_err(dev, "NetMos/Mostech serial driver ignoring port on ambiguous config.\n"); + return 0; + } + + moan_device("unknown NetMos/Mostech program interface", dev); + return 0; +} + +static int pci_netmos_init(struct pci_dev *dev) +{ + /* subdevice 0x00PS means

parallel, serial */ + unsigned int num_serial = dev->subsystem_device & 0xf; + + if ((dev->device == PCI_DEVICE_ID_NETMOS_9901) || + (dev->device == PCI_DEVICE_ID_NETMOS_9865)) + return 0; + + if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM && + dev->subsystem_device == 0x0299) + return 0; + + switch (dev->device) { /* FALLTHROUGH on all */ + case PCI_DEVICE_ID_NETMOS_9904: + case PCI_DEVICE_ID_NETMOS_9912: + case PCI_DEVICE_ID_NETMOS_9922: + case PCI_DEVICE_ID_NETMOS_9900: + num_serial = pci_netmos_9900_numports(dev); + break; + + default: + break; + } + + if (num_serial == 0) { + moan_device("unknown NetMos/Mostech device", dev); + return -ENODEV; + } + + return num_serial; +} + +/* + * These chips are available with optionally one parallel port and up to + * two serial ports. Unfortunately they all have the same product id. + * + * Basic configuration is done over a region of 32 I/O ports. The base + * ioport is called INTA or INTC, depending on docs/other drivers. + * + * The region of the 32 I/O ports is configured in POSIO0R... + */ + +/* registers */ +#define ITE_887x_MISCR 0x9c +#define ITE_887x_INTCBAR 0x78 +#define ITE_887x_UARTBAR 0x7c +#define ITE_887x_PS0BAR 0x10 +#define ITE_887x_POSIO0 0x60 + +/* I/O space size */ +#define ITE_887x_IOSIZE 32 +/* I/O space size (bits 26-24; 8 bytes = 011b) */ +#define ITE_887x_POSIO_IOSIZE_8 (3 << 24) +/* I/O space size (bits 26-24; 32 bytes = 101b) */ +#define ITE_887x_POSIO_IOSIZE_32 (5 << 24) +/* Decoding speed (1 = slow, 2 = medium, 3 = fast) */ +#define ITE_887x_POSIO_SPEED (3 << 29) +/* enable IO_Space bit */ +#define ITE_887x_POSIO_ENABLE (1 << 31) + +/* inta_addr are the configuration addresses of the ITE */ +static const short inta_addr[] = { 0x2a0, 0x2c0, 0x220, 0x240, 0x1e0, 0x200, 0x280 }; +static int pci_ite887x_init(struct pci_dev *dev) +{ + int ret, i, type; + struct resource *iobase = NULL; + u32 miscr, uartbar, ioport; + + /* search for the base-ioport */ + for (i = 0; i < ARRAY_SIZE(inta_addr); i++) { + iobase = request_region(inta_addr[i], ITE_887x_IOSIZE, + "ite887x"); + if (iobase != NULL) { + /* write POSIO0R - speed | size | ioport */ + pci_write_config_dword(dev, ITE_887x_POSIO0, + ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED | + ITE_887x_POSIO_IOSIZE_32 | inta_addr[i]); + /* write INTCBAR - ioport */ + pci_write_config_dword(dev, ITE_887x_INTCBAR, + inta_addr[i]); + ret = inb(inta_addr[i]); + if (ret != 0xff) { + /* ioport connected */ + break; + } + release_region(iobase->start, ITE_887x_IOSIZE); + } + } + + if (i == ARRAY_SIZE(inta_addr)) { + pci_err(dev, "could not find iobase\n"); + return -ENODEV; + } + + /* start of undocumented type checking (see parport_pc.c) */ + type = inb(iobase->start + 0x18) & 0x0f; + + switch (type) { + case 0x2: /* ITE8871 (1P) */ + case 0xa: /* ITE8875 (1P) */ + ret = 0; + break; + case 0xe: /* ITE8872 (2S1P) */ + ret = 2; + break; + case 0x6: /* ITE8873 (1S) */ + ret = 1; + break; + case 0x8: /* ITE8874 (2S) */ + ret = 2; + break; + default: + moan_device("Unknown ITE887x", dev); + ret = -ENODEV; + } + + /* configure all serial ports */ + for (i = 0; i < ret; i++) { + /* read the I/O port from the device */ + pci_read_config_dword(dev, ITE_887x_PS0BAR + (0x4 * (i + 1)), + &ioport); + ioport &= 0x0000FF00; /* the actual base address */ + pci_write_config_dword(dev, ITE_887x_POSIO0 + (0x4 * (i + 1)), + ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED | + ITE_887x_POSIO_IOSIZE_8 | ioport); + + /* write the ioport to the UARTBAR */ + pci_read_config_dword(dev, ITE_887x_UARTBAR, &uartbar); + uartbar &= ~(0xffff << (16 * i)); /* clear half the reg */ + uartbar |= (ioport << (16 * i)); /* set the ioport */ + pci_write_config_dword(dev, ITE_887x_UARTBAR, uartbar); + + /* get current config */ + pci_read_config_dword(dev, ITE_887x_MISCR, &miscr); + /* disable interrupts (UARTx_Routing[3:0]) */ + miscr &= ~(0xf << (12 - 4 * i)); + /* activate the UART (UARTx_En) */ + miscr |= 1 << (23 - i); + /* write new config with activated UART */ + pci_write_config_dword(dev, ITE_887x_MISCR, miscr); + } + + if (ret <= 0) { + /* the device has no UARTs if we get here */ + release_region(iobase->start, ITE_887x_IOSIZE); + } + + return ret; +} + +static void pci_ite887x_exit(struct pci_dev *dev) +{ + u32 ioport; + /* the ioport is bit 0-15 in POSIO0R */ + pci_read_config_dword(dev, ITE_887x_POSIO0, &ioport); + ioport &= 0xffff; + release_region(ioport, ITE_887x_IOSIZE); +} + +/* + * Oxford Semiconductor Inc. + * Check if an OxSemi device is part of the Tornado range of devices. + */ +#define PCI_VENDOR_ID_ENDRUN 0x7401 +#define PCI_DEVICE_ID_ENDRUN_1588 0xe100 + +static bool pci_oxsemi_tornado_p(struct pci_dev *dev) +{ + /* OxSemi Tornado devices are all 0xCxxx */ + if (dev->vendor == PCI_VENDOR_ID_OXSEMI && + (dev->device & 0xf000) != 0xc000) + return false; + + /* EndRun devices are all 0xExxx */ + if (dev->vendor == PCI_VENDOR_ID_ENDRUN && + (dev->device & 0xf000) != 0xe000) + return false; + + return true; +} + +/* + * Determine the number of ports available on a Tornado device. + */ +static int pci_oxsemi_tornado_init(struct pci_dev *dev) +{ + u8 __iomem *p; + unsigned long deviceID; + unsigned int number_uarts = 0; + + if (!pci_oxsemi_tornado_p(dev)) + return 0; + + p = pci_iomap(dev, 0, 5); + if (p == NULL) + return -ENOMEM; + + deviceID = ioread32(p); + /* Tornado device */ + if (deviceID == 0x07000200) { + number_uarts = ioread8(p + 4); + pci_dbg(dev, "%d ports detected on %s PCI Express device\n", + number_uarts, + dev->vendor == PCI_VENDOR_ID_ENDRUN ? + "EndRun" : "Oxford"); + } + pci_iounmap(dev, p); + return number_uarts; +} + +/* Quatech devices have their own extra interface features */ + +struct quatech_feature { + u16 devid; + bool amcc; +}; + +#define QPCR_TEST_FOR1 0x3F +#define QPCR_TEST_GET1 0x00 +#define QPCR_TEST_FOR2 0x40 +#define QPCR_TEST_GET2 0x40 +#define QPCR_TEST_FOR3 0x80 +#define QPCR_TEST_GET3 0x40 +#define QPCR_TEST_FOR4 0xC0 +#define QPCR_TEST_GET4 0x80 + +#define QOPR_CLOCK_X1 0x0000 +#define QOPR_CLOCK_X2 0x0001 +#define QOPR_CLOCK_X4 0x0002 +#define QOPR_CLOCK_X8 0x0003 +#define QOPR_CLOCK_RATE_MASK 0x0003 + + +static struct quatech_feature quatech_cards[] = { + { PCI_DEVICE_ID_QUATECH_QSC100, 1 }, + { PCI_DEVICE_ID_QUATECH_DSC100, 1 }, + { PCI_DEVICE_ID_QUATECH_DSC100E, 0 }, + { PCI_DEVICE_ID_QUATECH_DSC200, 1 }, + { PCI_DEVICE_ID_QUATECH_DSC200E, 0 }, + { PCI_DEVICE_ID_QUATECH_ESC100D, 1 }, + { PCI_DEVICE_ID_QUATECH_ESC100M, 1 }, + { PCI_DEVICE_ID_QUATECH_QSCP100, 1 }, + { PCI_DEVICE_ID_QUATECH_DSCP100, 1 }, + { PCI_DEVICE_ID_QUATECH_QSCP200, 1 }, + { PCI_DEVICE_ID_QUATECH_DSCP200, 1 }, + { PCI_DEVICE_ID_QUATECH_ESCLP100, 0 }, + { PCI_DEVICE_ID_QUATECH_QSCLP100, 0 }, + { PCI_DEVICE_ID_QUATECH_DSCLP100, 0 }, + { PCI_DEVICE_ID_QUATECH_SSCLP100, 0 }, + { PCI_DEVICE_ID_QUATECH_QSCLP200, 0 }, + { PCI_DEVICE_ID_QUATECH_DSCLP200, 0 }, + { PCI_DEVICE_ID_QUATECH_SSCLP200, 0 }, + { PCI_DEVICE_ID_QUATECH_SPPXP_100, 0 }, + { 0, } +}; + +static int pci_quatech_amcc(struct pci_dev *dev) +{ + struct quatech_feature *qf = &quatech_cards[0]; + while (qf->devid) { + if (qf->devid == dev->device) + return qf->amcc; + qf++; + } + pci_err(dev, "unknown port type '0x%04X'.\n", dev->device); + return 0; +}; + +static int pci_quatech_rqopr(struct uart_8250_port *port) +{ + unsigned long base = port->port.iobase; + u8 LCR, val; + + LCR = inb(base + UART_LCR); + outb(0xBF, base + UART_LCR); + val = inb(base + UART_SCR); + outb(LCR, base + UART_LCR); + return val; +} + +static void pci_quatech_wqopr(struct uart_8250_port *port, u8 qopr) +{ + unsigned long base = port->port.iobase; + u8 LCR; + + LCR = inb(base + UART_LCR); + outb(0xBF, base + UART_LCR); + inb(base + UART_SCR); + outb(qopr, base + UART_SCR); + outb(LCR, base + UART_LCR); +} + +static int pci_quatech_rqmcr(struct uart_8250_port *port) +{ + unsigned long base = port->port.iobase; + u8 LCR, val, qmcr; + + LCR = inb(base + UART_LCR); + outb(0xBF, base + UART_LCR); + val = inb(base + UART_SCR); + outb(val | 0x10, base + UART_SCR); + qmcr = inb(base + UART_MCR); + outb(val, base + UART_SCR); + outb(LCR, base + UART_LCR); + + return qmcr; +} + +static void pci_quatech_wqmcr(struct uart_8250_port *port, u8 qmcr) +{ + unsigned long base = port->port.iobase; + u8 LCR, val; + + LCR = inb(base + UART_LCR); + outb(0xBF, base + UART_LCR); + val = inb(base + UART_SCR); + outb(val | 0x10, base + UART_SCR); + outb(qmcr, base + UART_MCR); + outb(val, base + UART_SCR); + outb(LCR, base + UART_LCR); +} + +static int pci_quatech_has_qmcr(struct uart_8250_port *port) +{ + unsigned long base = port->port.iobase; + u8 LCR, val; + + LCR = inb(base + UART_LCR); + outb(0xBF, base + UART_LCR); + val = inb(base + UART_SCR); + if (val & 0x20) { + outb(0x80, UART_LCR); + if (!(inb(UART_SCR) & 0x20)) { + outb(LCR, base + UART_LCR); + return 1; + } + } + return 0; +} + +static int pci_quatech_test(struct uart_8250_port *port) +{ + u8 reg, qopr; + + qopr = pci_quatech_rqopr(port); + pci_quatech_wqopr(port, qopr & QPCR_TEST_FOR1); + reg = pci_quatech_rqopr(port) & 0xC0; + if (reg != QPCR_TEST_GET1) + return -EINVAL; + pci_quatech_wqopr(port, (qopr & QPCR_TEST_FOR1)|QPCR_TEST_FOR2); + reg = pci_quatech_rqopr(port) & 0xC0; + if (reg != QPCR_TEST_GET2) + return -EINVAL; + pci_quatech_wqopr(port, (qopr & QPCR_TEST_FOR1)|QPCR_TEST_FOR3); + reg = pci_quatech_rqopr(port) & 0xC0; + if (reg != QPCR_TEST_GET3) + return -EINVAL; + pci_quatech_wqopr(port, (qopr & QPCR_TEST_FOR1)|QPCR_TEST_FOR4); + reg = pci_quatech_rqopr(port) & 0xC0; + if (reg != QPCR_TEST_GET4) + return -EINVAL; + + pci_quatech_wqopr(port, qopr); + return 0; +} + +static int pci_quatech_clock(struct uart_8250_port *port) +{ + u8 qopr, reg, set; + unsigned long clock; + + if (pci_quatech_test(port) < 0) + return 1843200; + + qopr = pci_quatech_rqopr(port); + + pci_quatech_wqopr(port, qopr & ~QOPR_CLOCK_X8); + reg = pci_quatech_rqopr(port); + if (reg & QOPR_CLOCK_X8) { + clock = 1843200; + goto out; + } + pci_quatech_wqopr(port, qopr | QOPR_CLOCK_X8); + reg = pci_quatech_rqopr(port); + if (!(reg & QOPR_CLOCK_X8)) { + clock = 1843200; + goto out; + } + reg &= QOPR_CLOCK_X8; + if (reg == QOPR_CLOCK_X2) { + clock = 3685400; + set = QOPR_CLOCK_X2; + } else if (reg == QOPR_CLOCK_X4) { + clock = 7372800; + set = QOPR_CLOCK_X4; + } else if (reg == QOPR_CLOCK_X8) { + clock = 14745600; + set = QOPR_CLOCK_X8; + } else { + clock = 1843200; + set = QOPR_CLOCK_X1; + } + qopr &= ~QOPR_CLOCK_RATE_MASK; + qopr |= set; + +out: + pci_quatech_wqopr(port, qopr); + return clock; +} + +static int pci_quatech_rs422(struct uart_8250_port *port) +{ + u8 qmcr; + int rs422 = 0; + + if (!pci_quatech_has_qmcr(port)) + return 0; + qmcr = pci_quatech_rqmcr(port); + pci_quatech_wqmcr(port, 0xFF); + if (pci_quatech_rqmcr(port)) + rs422 = 1; + pci_quatech_wqmcr(port, qmcr); + return rs422; +} + +static int pci_quatech_init(struct pci_dev *dev) +{ + if (pci_quatech_amcc(dev)) { + unsigned long base = pci_resource_start(dev, 0); + if (base) { + u32 tmp; + + outl(inl(base + 0x38) | 0x00002000, base + 0x38); + tmp = inl(base + 0x3c); + outl(tmp | 0x01000000, base + 0x3c); + outl(tmp &= ~0x01000000, base + 0x3c); + } + } + return 0; +} + +static int pci_quatech_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + /* Needed by pci_quatech calls below */ + port->port.iobase = pci_resource_start(priv->dev, FL_GET_BASE(board->flags)); + /* Set up the clocking */ + port->port.uartclk = pci_quatech_clock(port); + /* For now just warn about RS422 */ + if (pci_quatech_rs422(port)) + pci_warn(priv->dev, "software control of RS422 features not currently supported.\n"); + return pci_default_setup(priv, board, port, idx); +} + +static void pci_quatech_exit(struct pci_dev *dev) +{ +} + +static int pci_default_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + unsigned int bar, offset = board->first_offset, maxnr; + + bar = FL_GET_BASE(board->flags); + if (board->flags & FL_BASE_BARS) + bar += idx; + else + offset += idx * board->uart_offset; + + maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) >> + (board->reg_shift + 3); + + if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr) + return 1; + + return setup_port(priv, port, bar, offset, board->reg_shift); +} +static void +pericom_do_set_divisor(struct uart_port *port, unsigned int baud, + unsigned int quot, unsigned int quot_frac) +{ + int scr; + int lcr; + + for (scr = 16; scr > 4; scr--) { + unsigned int maxrate = port->uartclk / scr; + unsigned int divisor = max(maxrate / baud, 1U); + int delta = maxrate / divisor - baud; + + if (baud > maxrate + baud / 50) + continue; + + if (delta > baud / 50) + divisor++; + + if (divisor > 0xffff) + continue; + + /* Update delta due to possible divisor change */ + delta = maxrate / divisor - baud; + if (abs(delta) < baud / 50) { + lcr = serial_port_in(port, UART_LCR); + serial_port_out(port, UART_LCR, lcr | 0x80); + serial_port_out(port, UART_DLL, divisor & 0xff); + serial_port_out(port, UART_DLM, divisor >> 8 & 0xff); + serial_port_out(port, 2, 16 - scr); + serial_port_out(port, UART_LCR, lcr); + return; + } + } +} +static int pci_pericom_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + unsigned int bar, offset = board->first_offset, maxnr; + + bar = FL_GET_BASE(board->flags); + if (board->flags & FL_BASE_BARS) + bar += idx; + else + offset += idx * board->uart_offset; + + + maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) >> + (board->reg_shift + 3); + + if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr) + return 1; + + port->port.set_divisor = pericom_do_set_divisor; + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + +static int pci_pericom_setup_four_at_eight(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + unsigned int bar, offset = board->first_offset, maxnr; + + bar = FL_GET_BASE(board->flags); + if (board->flags & FL_BASE_BARS) + bar += idx; + else + offset += idx * board->uart_offset; + + if (idx==3) + offset = 0x38; + + maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) >> + (board->reg_shift + 3); + + if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr) + return 1; + + port->port.set_divisor = pericom_do_set_divisor; + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + +static int +ce4100_serial_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + int ret; + + ret = setup_port(priv, port, idx, 0, board->reg_shift); + port->port.iotype = UPIO_MEM32; + port->port.type = PORT_XSCALE; + port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE); + port->port.regshift = 2; + + return ret; +} + +static int +pci_omegapci_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + return setup_port(priv, port, 2, idx * 8, 0); +} + +static int +pci_brcm_trumanage_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + int ret = pci_default_setup(priv, board, port, idx); + + port->port.type = PORT_BRCM_TRUMANAGE; + port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE); + return ret; +} + +/* RTS will control by MCR if this bit is 0 */ +#define FINTEK_RTS_CONTROL_BY_HW BIT(4) +/* only worked with FINTEK_RTS_CONTROL_BY_HW on */ +#define FINTEK_RTS_INVERT BIT(5) + +/* We should do proper H/W transceiver setting before change to RS485 mode */ +static int pci_fintek_rs485_config(struct uart_port *port, + struct serial_rs485 *rs485) +{ + struct pci_dev *pci_dev = to_pci_dev(port->dev); + u8 setting; + u8 *index = (u8 *) port->private_data; + + pci_read_config_byte(pci_dev, 0x40 + 8 * *index + 7, &setting); + + if (!rs485) + rs485 = &port->rs485; + else if (rs485->flags & SER_RS485_ENABLED) + memset(rs485->padding, 0, sizeof(rs485->padding)); + else + memset(rs485, 0, sizeof(*rs485)); + + /* F81504/508/512 not support RTS delay before or after send */ + rs485->flags &= SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND; + + if (rs485->flags & SER_RS485_ENABLED) { + /* Enable RTS H/W control mode */ + setting |= FINTEK_RTS_CONTROL_BY_HW; + + if (rs485->flags & SER_RS485_RTS_ON_SEND) { + /* RTS driving high on TX */ + setting &= ~FINTEK_RTS_INVERT; + } else { + /* RTS driving low on TX */ + setting |= FINTEK_RTS_INVERT; + } + + rs485->delay_rts_after_send = 0; + rs485->delay_rts_before_send = 0; + } else { + /* Disable RTS H/W control mode */ + setting &= ~(FINTEK_RTS_CONTROL_BY_HW | FINTEK_RTS_INVERT); + } + + pci_write_config_byte(pci_dev, 0x40 + 8 * *index + 7, setting); + + if (rs485 != &port->rs485) + port->rs485 = *rs485; + + return 0; +} + +static int pci_fintek_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + struct pci_dev *pdev = priv->dev; + u8 *data; + u8 config_base; + u16 iobase; + + config_base = 0x40 + 0x08 * idx; + + /* Get the io address from configuration space */ + pci_read_config_word(pdev, config_base + 4, &iobase); + + pci_dbg(pdev, "idx=%d iobase=0x%x", idx, iobase); + + port->port.iotype = UPIO_PORT; + port->port.iobase = iobase; + port->port.rs485_config = pci_fintek_rs485_config; + + data = devm_kzalloc(&pdev->dev, sizeof(u8), GFP_KERNEL); + if (!data) + return -ENOMEM; + + /* preserve index in PCI configuration space */ + *data = idx; + port->port.private_data = data; + + return 0; +} + +static int pci_fintek_init(struct pci_dev *dev) +{ + unsigned long iobase; + u32 max_port, i; + resource_size_t bar_data[3]; + u8 config_base; + struct serial_private *priv = pci_get_drvdata(dev); + + if (!(pci_resource_flags(dev, 5) & IORESOURCE_IO) || + !(pci_resource_flags(dev, 4) & IORESOURCE_IO) || + !(pci_resource_flags(dev, 3) & IORESOURCE_IO)) + return -ENODEV; + + switch (dev->device) { + case 0x1104: /* 4 ports */ + case 0x1108: /* 8 ports */ + max_port = dev->device & 0xff; + break; + case 0x1112: /* 12 ports */ + max_port = 12; + break; + default: + return -EINVAL; + } + + /* Get the io address dispatch from the BIOS */ + bar_data[0] = pci_resource_start(dev, 5); + bar_data[1] = pci_resource_start(dev, 4); + bar_data[2] = pci_resource_start(dev, 3); + + for (i = 0; i < max_port; ++i) { + /* UART0 configuration offset start from 0x40 */ + config_base = 0x40 + 0x08 * i; + + /* Calculate Real IO Port */ + iobase = (bar_data[i / 4] & 0xffffffe0) + (i % 4) * 8; + + /* Enable UART I/O port */ + pci_write_config_byte(dev, config_base + 0x00, 0x01); + + /* Select 128-byte FIFO and 8x FIFO threshold */ + pci_write_config_byte(dev, config_base + 0x01, 0x33); + + /* LSB UART */ + pci_write_config_byte(dev, config_base + 0x04, + (u8)(iobase & 0xff)); + + /* MSB UART */ + pci_write_config_byte(dev, config_base + 0x05, + (u8)((iobase & 0xff00) >> 8)); + + pci_write_config_byte(dev, config_base + 0x06, dev->irq); + + if (!priv) { + /* First init without port data + * force init to RS232 Mode + */ + pci_write_config_byte(dev, config_base + 0x07, 0x01); + } + } + + return max_port; +} + +static void f815xxa_mem_serial_out(struct uart_port *p, int offset, int value) +{ + struct f815xxa_data *data = p->private_data; + unsigned long flags; + + spin_lock_irqsave(&data->lock, flags); + writeb(value, p->membase + offset); + readb(p->membase + UART_SCR); /* Dummy read for flush pcie tx queue */ + spin_unlock_irqrestore(&data->lock, flags); +} + +static int pci_fintek_f815xxa_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + struct pci_dev *pdev = priv->dev; + struct f815xxa_data *data; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->idx = idx; + spin_lock_init(&data->lock); + + port->port.private_data = data; + port->port.iotype = UPIO_MEM; + port->port.flags |= UPF_IOREMAP; + port->port.mapbase = pci_resource_start(pdev, 0) + 8 * idx; + port->port.serial_out = f815xxa_mem_serial_out; + + return 0; +} + +static int pci_fintek_f815xxa_init(struct pci_dev *dev) +{ + u32 max_port, i; + int config_base; + + if (!(pci_resource_flags(dev, 0) & IORESOURCE_MEM)) + return -ENODEV; + + switch (dev->device) { + case 0x1204: /* 4 ports */ + case 0x1208: /* 8 ports */ + max_port = dev->device & 0xff; + break; + case 0x1212: /* 12 ports */ + max_port = 12; + break; + default: + return -EINVAL; + } + + /* Set to mmio decode */ + pci_write_config_byte(dev, 0x209, 0x40); + + for (i = 0; i < max_port; ++i) { + /* UART0 configuration offset start from 0x2A0 */ + config_base = 0x2A0 + 0x08 * i; + + /* Select 128-byte FIFO and 8x FIFO threshold */ + pci_write_config_byte(dev, config_base + 0x01, 0x33); + + /* Enable UART I/O port */ + pci_write_config_byte(dev, config_base + 0, 0x01); + } + + return max_port; +} + +static int skip_tx_en_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + port->port.quirks |= UPQ_NO_TXEN_TEST; + pci_dbg(priv->dev, + "serial8250: skipping TxEn test for device [%04x:%04x] subsystem [%04x:%04x]\n", + priv->dev->vendor, priv->dev->device, + priv->dev->subsystem_vendor, priv->dev->subsystem_device); + + return pci_default_setup(priv, board, port, idx); +} + +static void kt_handle_break(struct uart_port *p) +{ + struct uart_8250_port *up = up_to_u8250p(p); + /* + * On receipt of a BI, serial device in Intel ME (Intel + * management engine) needs to have its fifos cleared for sane + * SOL (Serial Over Lan) output. + */ + serial8250_clear_and_reinit_fifos(up); +} + +static unsigned int kt_serial_in(struct uart_port *p, int offset) +{ + struct uart_8250_port *up = up_to_u8250p(p); + unsigned int val; + + /* + * When the Intel ME (management engine) gets reset its serial + * port registers could return 0 momentarily. Functions like + * serial8250_console_write, read and save the IER, perform + * some operation and then restore it. In order to avoid + * setting IER register inadvertently to 0, if the value read + * is 0, double check with ier value in uart_8250_port and use + * that instead. up->ier should be the same value as what is + * currently configured. + */ + val = inb(p->iobase + offset); + if (offset == UART_IER) { + if (val == 0) + val = up->ier; + } + return val; +} + +static int kt_serial_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + port->port.flags |= UPF_BUG_THRE; + port->port.serial_in = kt_serial_in; + port->port.handle_break = kt_handle_break; + return skip_tx_en_setup(priv, board, port, idx); +} + +static int pci_eg20t_init(struct pci_dev *dev) +{ +#if defined(CONFIG_SERIAL_PCH_UART) || defined(CONFIG_SERIAL_PCH_UART_MODULE) + return -ENODEV; +#else + return 0; +#endif +} + +static int +pci_wch_ch353_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + port->port.flags |= UPF_FIXED_TYPE; + port->port.type = PORT_16550A; + return pci_default_setup(priv, board, port, idx); +} + +static int +pci_wch_ch355_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + port->port.flags |= UPF_FIXED_TYPE; + port->port.type = PORT_16550A; + return pci_default_setup(priv, board, port, idx); +} + +static int +pci_wch_ch38x_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + port->port.flags |= UPF_FIXED_TYPE; + port->port.type = PORT_16850; + return pci_default_setup(priv, board, port, idx); +} + + +#define CH384_XINT_ENABLE_REG 0xEB +#define CH384_XINT_ENABLE_BIT 0x02 + +static int pci_wch_ch38x_init(struct pci_dev *dev) +{ + int max_port; + unsigned long iobase; + + + switch (dev->device) { + case 0x3853: /* 8 ports */ + max_port = 8; + break; + default: + return -EINVAL; + } + + iobase = pci_resource_start(dev, 0); + outb(CH384_XINT_ENABLE_BIT, iobase + CH384_XINT_ENABLE_REG); + + return max_port; +} + +static void pci_wch_ch38x_exit(struct pci_dev *dev) +{ + unsigned long iobase; + + iobase = pci_resource_start(dev, 0); + outb(0x0, iobase + CH384_XINT_ENABLE_REG); +} + + +static int +pci_sunix_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + int bar; + int offset; + + port->port.flags |= UPF_FIXED_TYPE; + port->port.type = PORT_SUNIX; + + if (idx < 4) { + bar = 0; + offset = idx * board->uart_offset; + } else { + bar = 1; + idx -= 4; + idx = div_s64_rem(idx, 4, &offset); + offset = idx * 64 + offset * board->uart_offset; + } + + return setup_port(priv, port, bar, offset, 0); +} + +static int +pci_moxa_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + unsigned int bar = FL_GET_BASE(board->flags); + int offset; + + if (board->num_ports == 4 && idx == 3) + offset = 7 * board->uart_offset; + else + offset = idx * board->uart_offset; + + return setup_port(priv, port, bar, offset, 0); +} + +#define PCI_VENDOR_ID_SBSMODULARIO 0x124B +#define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B +#define PCI_DEVICE_ID_OCTPRO 0x0001 +#define PCI_SUBDEVICE_ID_OCTPRO232 0x0108 +#define PCI_SUBDEVICE_ID_OCTPRO422 0x0208 +#define PCI_SUBDEVICE_ID_POCTAL232 0x0308 +#define PCI_SUBDEVICE_ID_POCTAL422 0x0408 +#define PCI_SUBDEVICE_ID_SIIG_DUAL_00 0x2500 +#define PCI_SUBDEVICE_ID_SIIG_DUAL_30 0x2530 +#define PCI_VENDOR_ID_ADVANTECH 0x13fe +#define PCI_DEVICE_ID_INTEL_CE4100_UART 0x2e66 +#define PCI_DEVICE_ID_ADVANTECH_PCI1600 0x1600 +#define PCI_DEVICE_ID_ADVANTECH_PCI1600_1611 0x1611 +#define PCI_DEVICE_ID_ADVANTECH_PCI3620 0x3620 +#define PCI_DEVICE_ID_ADVANTECH_PCI3618 0x3618 +#define PCI_DEVICE_ID_ADVANTECH_PCIf618 0xf618 +#define PCI_DEVICE_ID_TITAN_200I 0x8028 +#define PCI_DEVICE_ID_TITAN_400I 0x8048 +#define PCI_DEVICE_ID_TITAN_800I 0x8088 +#define PCI_DEVICE_ID_TITAN_800EH 0xA007 +#define PCI_DEVICE_ID_TITAN_800EHB 0xA008 +#define PCI_DEVICE_ID_TITAN_400EH 0xA009 +#define PCI_DEVICE_ID_TITAN_100E 0xA010 +#define PCI_DEVICE_ID_TITAN_200E 0xA012 +#define PCI_DEVICE_ID_TITAN_400E 0xA013 +#define PCI_DEVICE_ID_TITAN_800E 0xA014 +#define PCI_DEVICE_ID_TITAN_200EI 0xA016 +#define PCI_DEVICE_ID_TITAN_200EISI 0xA017 +#define PCI_DEVICE_ID_TITAN_200V3 0xA306 +#define PCI_DEVICE_ID_TITAN_400V3 0xA310 +#define PCI_DEVICE_ID_TITAN_410V3 0xA312 +#define PCI_DEVICE_ID_TITAN_800V3 0xA314 +#define PCI_DEVICE_ID_TITAN_800V3B 0xA315 +#define PCI_DEVICE_ID_OXSEMI_16PCI958 0x9538 +#define PCIE_DEVICE_ID_NEO_2_OX_IBM 0x00F6 +#define PCI_DEVICE_ID_PLX_CRONYX_OMEGA 0xc001 +#define PCI_DEVICE_ID_INTEL_PATSBURG_KT 0x1d3d +#define PCI_VENDOR_ID_WCH 0x4348 +#define PCI_DEVICE_ID_WCH_CH352_2S 0x3253 +#define PCI_DEVICE_ID_WCH_CH353_4S 0x3453 +#define PCI_DEVICE_ID_WCH_CH353_2S1PF 0x5046 +#define PCI_DEVICE_ID_WCH_CH353_1S1P 0x5053 +#define PCI_DEVICE_ID_WCH_CH353_2S1P 0x7053 +#define PCI_DEVICE_ID_WCH_CH355_4S 0x7173 +#define PCI_VENDOR_ID_AGESTAR 0x5372 +#define PCI_DEVICE_ID_AGESTAR_9375 0x6872 +#define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a +#define PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800 0x818e + +#define PCIE_VENDOR_ID_WCH 0x1c00 +#define PCIE_DEVICE_ID_WCH_CH382_2S1P 0x3250 +#define PCIE_DEVICE_ID_WCH_CH384_4S 0x3470 +#define PCIE_DEVICE_ID_WCH_CH384_8S 0x3853 +#define PCIE_DEVICE_ID_WCH_CH382_2S 0x3253 + +#define PCI_VENDOR_ID_ACCESIO 0x494f +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SDB 0x1051 +#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2S 0x1053 +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SDB 0x105C +#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4S 0x105E +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM232_2DB 0x1091 +#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_2 0x1093 +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4DB 0x1099 +#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_4 0x109B +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SMDB 0x10D1 +#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2SM 0x10D3 +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SMDB 0x10DA +#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4SM 0x10DC +#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_1 0x1108 +#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_2 0x1110 +#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_2 0x1111 +#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_4 0x1118 +#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_4 0x1119 +#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2S 0x1152 +#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S 0x115A +#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_2 0x1190 +#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_2 0x1191 +#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4 0x1198 +#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_4 0x1199 +#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2SM 0x11D0 +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM422_4 0x105A +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM485_4 0x105B +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM422_8 0x106A +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM485_8 0x106B +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4 0x1098 +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM232_8 0x10A9 +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SM 0x10D9 +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_8SM 0x10E9 +#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4SM 0x11D8 + + +#define PCI_DEVICE_ID_MOXA_CP102E 0x1024 +#define PCI_DEVICE_ID_MOXA_CP102EL 0x1025 +#define PCI_DEVICE_ID_MOXA_CP104EL_A 0x1045 +#define PCI_DEVICE_ID_MOXA_CP114EL 0x1144 +#define PCI_DEVICE_ID_MOXA_CP116E_A_A 0x1160 +#define PCI_DEVICE_ID_MOXA_CP116E_A_B 0x1161 +#define PCI_DEVICE_ID_MOXA_CP118EL_A 0x1182 +#define PCI_DEVICE_ID_MOXA_CP118E_A_I 0x1183 +#define PCI_DEVICE_ID_MOXA_CP132EL 0x1322 +#define PCI_DEVICE_ID_MOXA_CP134EL_A 0x1342 +#define PCI_DEVICE_ID_MOXA_CP138E_A 0x1381 +#define PCI_DEVICE_ID_MOXA_CP168EL_A 0x1683 + +/* Unknown vendors/cards - this should not be in linux/pci_ids.h */ +#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584 +#define PCI_SUBDEVICE_ID_UNKNOWN_0x1588 0x1588 + +/* + * Master list of serial port init/setup/exit quirks. + * This does not describe the general nature of the port. + * (ie, baud base, number and location of ports, etc) + * + * This list is ordered alphabetically by vendor then device. + * Specific entries must come before more generic entries. + */ +static struct pci_serial_quirk pci_serial_quirks[] __refdata = { + /* + * ADDI-DATA GmbH communication cards + */ + { + .vendor = PCI_VENDOR_ID_AMCC, + .device = PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = addidata_apci7800_setup, + }, + /* + * AFAVLAB cards - these may be called via parport_serial + * It is not clear whether this applies to all products. + */ + { + .vendor = PCI_VENDOR_ID_AFAVLAB, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = afavlab_setup, + }, + /* + * HP Diva + */ + { + .vendor = PCI_VENDOR_ID_HP, + .device = PCI_DEVICE_ID_HP_DIVA, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_hp_diva_init, + .setup = pci_hp_diva_setup, + }, + /* + * HPE PCI serial device + */ + { + .vendor = PCI_VENDOR_ID_HP_3PAR, + .device = PCI_DEVICE_ID_HPE_PCI_SERIAL, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_hp_diva_setup, + }, + /* + * Intel + */ + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_80960_RP, + .subvendor = 0xe4bf, + .subdevice = PCI_ANY_ID, + .init = pci_inteli960ni_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_8257X_SOL, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = skip_tx_en_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82573L_SOL, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = skip_tx_en_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82573E_SOL, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = skip_tx_en_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_CE4100_UART, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = ce4100_serial_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_PATSBURG_KT, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = kt_serial_setup, + }, + /* + * ITE + */ + { + .vendor = PCI_VENDOR_ID_ITE, + .device = PCI_DEVICE_ID_ITE_8872, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ite887x_init, + .setup = pci_default_setup, + .exit = pci_ite887x_exit, + }, + /* + * National Instruments + */ + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PCI23216, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = pci_ni8420_exit, + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PCI2328, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = pci_ni8420_exit, + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PCI2324, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = pci_ni8420_exit, + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PCI2322, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = pci_ni8420_exit, + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PCI2324I, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = pci_ni8420_exit, + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PCI2322I, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = pci_ni8420_exit, + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PXI8420_23216, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = pci_ni8420_exit, + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PXI8420_2328, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = pci_ni8420_exit, + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PXI8420_2324, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = pci_ni8420_exit, + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PXI8420_2322, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = pci_ni8420_exit, + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PXI8422_2324, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = pci_ni8420_exit, + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PXI8422_2322, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = pci_ni8420_exit, + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8430_init, + .setup = pci_ni8430_setup, + .exit = pci_ni8430_exit, + }, + /* Quatech */ + { + .vendor = PCI_VENDOR_ID_QUATECH, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_quatech_init, + .setup = pci_quatech_setup, + .exit = pci_quatech_exit, + }, + /* + * Panacom + */ + { + .vendor = PCI_VENDOR_ID_PANACOM, + .device = PCI_DEVICE_ID_PANACOM_QUADMODEM, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_plx9050_init, + .setup = pci_default_setup, + .exit = pci_plx9050_exit, + }, + { + .vendor = PCI_VENDOR_ID_PANACOM, + .device = PCI_DEVICE_ID_PANACOM_DUALMODEM, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_plx9050_init, + .setup = pci_default_setup, + .exit = pci_plx9050_exit, + }, + /* + * Pericom (Only 7954 - It have a offset jump for port 4) + */ + { + .vendor = PCI_VENDOR_ID_PERICOM, + .device = PCI_DEVICE_ID_PERICOM_PI7C9X7954, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_pericom_setup_four_at_eight, + }, + /* + * PLX + */ + { + .vendor = PCI_VENDOR_ID_PLX, + .device = PCI_DEVICE_ID_PLX_9050, + .subvendor = PCI_SUBVENDOR_ID_EXSYS, + .subdevice = PCI_SUBDEVICE_ID_EXSYS_4055, + .init = pci_plx9050_init, + .setup = pci_default_setup, + .exit = pci_plx9050_exit, + }, + { + .vendor = PCI_VENDOR_ID_PLX, + .device = PCI_DEVICE_ID_PLX_9050, + .subvendor = PCI_SUBVENDOR_ID_KEYSPAN, + .subdevice = PCI_SUBDEVICE_ID_KEYSPAN_SX2, + .init = pci_plx9050_init, + .setup = pci_default_setup, + .exit = pci_plx9050_exit, + }, + { + .vendor = PCI_VENDOR_ID_PLX, + .device = PCI_DEVICE_ID_PLX_ROMULUS, + .subvendor = PCI_VENDOR_ID_PLX, + .subdevice = PCI_DEVICE_ID_PLX_ROMULUS, + .init = pci_plx9050_init, + .setup = pci_default_setup, + .exit = pci_plx9050_exit, + }, + { + .vendor = PCI_VENDOR_ID_ACCESIO, + .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SDB, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_pericom_setup_four_at_eight, + }, + { + .vendor = PCI_VENDOR_ID_ACCESIO, + .device = PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4S, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_pericom_setup_four_at_eight, + }, + { + .vendor = PCI_VENDOR_ID_ACCESIO, + .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4DB, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_pericom_setup_four_at_eight, + }, + { + .vendor = PCI_VENDOR_ID_ACCESIO, + .device = PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_4, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_pericom_setup_four_at_eight, + }, + { + .vendor = PCI_VENDOR_ID_ACCESIO, + .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SMDB, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_pericom_setup_four_at_eight, + }, + { + .vendor = PCI_VENDOR_ID_ACCESIO, + .device = PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4SM, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_pericom_setup_four_at_eight, + }, + { + .vendor = PCI_VENDOR_ID_ACCESIO, + .device = PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_4, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_pericom_setup_four_at_eight, + }, + { + .vendor = PCI_VENDOR_ID_ACCESIO, + .device = PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_4, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_pericom_setup_four_at_eight, + }, + { + .vendor = PCI_VENDOR_ID_ACCESIO, + .device = PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_pericom_setup_four_at_eight, + }, + { + .vendor = PCI_VENDOR_ID_ACCESIO, + .device = PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_pericom_setup_four_at_eight, + }, + { + .vendor = PCI_VENDOR_ID_ACCESIO, + .device = PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_4, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_pericom_setup_four_at_eight, + }, + { + .vendor = PCI_VENDOR_ID_ACCESIO, + .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM422_4, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_pericom_setup_four_at_eight, + }, + { + .vendor = PCI_VENDOR_ID_ACCESIO, + .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM485_4, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_pericom_setup_four_at_eight, + }, + { + .vendor = PCI_VENDOR_ID_ACCESIO, + .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_pericom_setup_four_at_eight, + }, + { + .vendor = PCI_VENDOR_ID_ACCESIO, + .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SM, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_pericom_setup_four_at_eight, + }, + { + .vendor = PCI_VENDOR_ID_ACCESIO, + .device = PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4SM, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_pericom_setup_four_at_eight, + }, + { + .vendor = PCI_VENDOR_ID_ACCESIO, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_pericom_setup, + }, /* + * SBS Technologies, Inc., PMC-OCTALPRO 232 + */ + { + .vendor = PCI_VENDOR_ID_SBSMODULARIO, + .device = PCI_DEVICE_ID_OCTPRO, + .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, + .subdevice = PCI_SUBDEVICE_ID_OCTPRO232, + .init = sbs_init, + .setup = sbs_setup, + .exit = sbs_exit, + }, + /* + * SBS Technologies, Inc., PMC-OCTALPRO 422 + */ + { + .vendor = PCI_VENDOR_ID_SBSMODULARIO, + .device = PCI_DEVICE_ID_OCTPRO, + .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, + .subdevice = PCI_SUBDEVICE_ID_OCTPRO422, + .init = sbs_init, + .setup = sbs_setup, + .exit = sbs_exit, + }, + /* + * SBS Technologies, Inc., P-Octal 232 + */ + { + .vendor = PCI_VENDOR_ID_SBSMODULARIO, + .device = PCI_DEVICE_ID_OCTPRO, + .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, + .subdevice = PCI_SUBDEVICE_ID_POCTAL232, + .init = sbs_init, + .setup = sbs_setup, + .exit = sbs_exit, + }, + /* + * SBS Technologies, Inc., P-Octal 422 + */ + { + .vendor = PCI_VENDOR_ID_SBSMODULARIO, + .device = PCI_DEVICE_ID_OCTPRO, + .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, + .subdevice = PCI_SUBDEVICE_ID_POCTAL422, + .init = sbs_init, + .setup = sbs_setup, + .exit = sbs_exit, + }, + /* + * SIIG cards - these may be called via parport_serial + */ + { + .vendor = PCI_VENDOR_ID_SIIG, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_siig_init, + .setup = pci_siig_setup, + }, + /* + * Titan cards + */ + { + .vendor = PCI_VENDOR_ID_TITAN, + .device = PCI_DEVICE_ID_TITAN_400L, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = titan_400l_800l_setup, + }, + { + .vendor = PCI_VENDOR_ID_TITAN, + .device = PCI_DEVICE_ID_TITAN_800L, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = titan_400l_800l_setup, + }, + /* + * Timedia cards + */ + { + .vendor = PCI_VENDOR_ID_TIMEDIA, + .device = PCI_DEVICE_ID_TIMEDIA_1889, + .subvendor = PCI_VENDOR_ID_TIMEDIA, + .subdevice = PCI_ANY_ID, + .probe = pci_timedia_probe, + .init = pci_timedia_init, + .setup = pci_timedia_setup, + }, + { + .vendor = PCI_VENDOR_ID_TIMEDIA, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_timedia_setup, + }, + /* + * Sunix PCI serial boards + */ + { + .vendor = PCI_VENDOR_ID_SUNIX, + .device = PCI_DEVICE_ID_SUNIX_1999, + .subvendor = PCI_VENDOR_ID_SUNIX, + .subdevice = PCI_ANY_ID, + .setup = pci_sunix_setup, + }, + /* + * Xircom cards + */ + { + .vendor = PCI_VENDOR_ID_XIRCOM, + .device = PCI_DEVICE_ID_XIRCOM_X3201_MDM, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_xircom_init, + .setup = pci_default_setup, + }, + /* + * Netmos cards - these may be called via parport_serial + */ + { + .vendor = PCI_VENDOR_ID_NETMOS, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_netmos_init, + .setup = pci_netmos_9900_setup, + }, + /* + * EndRun Technologies + */ + { + .vendor = PCI_VENDOR_ID_ENDRUN, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_oxsemi_tornado_init, + .setup = pci_default_setup, + }, + /* + * For Oxford Semiconductor Tornado based devices + */ + { + .vendor = PCI_VENDOR_ID_OXSEMI, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_oxsemi_tornado_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_MAINPINE, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_oxsemi_tornado_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_DIGI, + .device = PCIE_DEVICE_ID_NEO_2_OX_IBM, + .subvendor = PCI_SUBVENDOR_ID_IBM, + .subdevice = PCI_ANY_ID, + .init = pci_oxsemi_tornado_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x8811, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_eg20t_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x8812, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_eg20t_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x8813, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_eg20t_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x8814, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_eg20t_init, + .setup = pci_default_setup, + }, + { + .vendor = 0x10DB, + .device = 0x8027, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_eg20t_init, + .setup = pci_default_setup, + }, + { + .vendor = 0x10DB, + .device = 0x8028, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_eg20t_init, + .setup = pci_default_setup, + }, + { + .vendor = 0x10DB, + .device = 0x8029, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_eg20t_init, + .setup = pci_default_setup, + }, + { + .vendor = 0x10DB, + .device = 0x800C, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_eg20t_init, + .setup = pci_default_setup, + }, + { + .vendor = 0x10DB, + .device = 0x800D, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_eg20t_init, + .setup = pci_default_setup, + }, + /* + * Cronyx Omega PCI (PLX-chip based) + */ + { + .vendor = PCI_VENDOR_ID_PLX, + .device = PCI_DEVICE_ID_PLX_CRONYX_OMEGA, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_omegapci_setup, + }, + /* WCH CH353 1S1P card (16550 clone) */ + { + .vendor = PCI_VENDOR_ID_WCH, + .device = PCI_DEVICE_ID_WCH_CH353_1S1P, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_wch_ch353_setup, + }, + /* WCH CH353 2S1P card (16550 clone) */ + { + .vendor = PCI_VENDOR_ID_WCH, + .device = PCI_DEVICE_ID_WCH_CH353_2S1P, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_wch_ch353_setup, + }, + /* WCH CH353 4S card (16550 clone) */ + { + .vendor = PCI_VENDOR_ID_WCH, + .device = PCI_DEVICE_ID_WCH_CH353_4S, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_wch_ch353_setup, + }, + /* WCH CH353 2S1PF card (16550 clone) */ + { + .vendor = PCI_VENDOR_ID_WCH, + .device = PCI_DEVICE_ID_WCH_CH353_2S1PF, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_wch_ch353_setup, + }, + /* WCH CH352 2S card (16550 clone) */ + { + .vendor = PCI_VENDOR_ID_WCH, + .device = PCI_DEVICE_ID_WCH_CH352_2S, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_wch_ch353_setup, + }, + /* WCH CH355 4S card (16550 clone) */ + { + .vendor = PCI_VENDOR_ID_WCH, + .device = PCI_DEVICE_ID_WCH_CH355_4S, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_wch_ch355_setup, + }, + /* WCH CH382 2S card (16850 clone) */ + { + .vendor = PCIE_VENDOR_ID_WCH, + .device = PCIE_DEVICE_ID_WCH_CH382_2S, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_wch_ch38x_setup, + }, + /* WCH CH382 2S1P card (16850 clone) */ + { + .vendor = PCIE_VENDOR_ID_WCH, + .device = PCIE_DEVICE_ID_WCH_CH382_2S1P, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_wch_ch38x_setup, + }, + /* WCH CH384 4S card (16850 clone) */ + { + .vendor = PCIE_VENDOR_ID_WCH, + .device = PCIE_DEVICE_ID_WCH_CH384_4S, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_wch_ch38x_setup, + }, + /* WCH CH384 8S card (16850 clone) */ + { + .vendor = PCIE_VENDOR_ID_WCH, + .device = PCIE_DEVICE_ID_WCH_CH384_8S, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_wch_ch38x_init, + .exit = pci_wch_ch38x_exit, + .setup = pci_wch_ch38x_setup, + }, + /* + * Broadcom TruManage (NetXtreme) + */ + { + .vendor = PCI_VENDOR_ID_BROADCOM, + .device = PCI_DEVICE_ID_BROADCOM_TRUMANAGE, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_brcm_trumanage_setup, + }, + { + .vendor = 0x1c29, + .device = 0x1104, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_fintek_setup, + .init = pci_fintek_init, + }, + { + .vendor = 0x1c29, + .device = 0x1108, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_fintek_setup, + .init = pci_fintek_init, + }, + { + .vendor = 0x1c29, + .device = 0x1112, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_fintek_setup, + .init = pci_fintek_init, + }, + /* + * MOXA + */ + { + .vendor = PCI_VENDOR_ID_MOXA, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_moxa_setup, + }, + { + .vendor = 0x1c29, + .device = 0x1204, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_fintek_f815xxa_setup, + .init = pci_fintek_f815xxa_init, + }, + { + .vendor = 0x1c29, + .device = 0x1208, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_fintek_f815xxa_setup, + .init = pci_fintek_f815xxa_init, + }, + { + .vendor = 0x1c29, + .device = 0x1212, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_fintek_f815xxa_setup, + .init = pci_fintek_f815xxa_init, + }, + + /* + * Default "match everything" terminator entry + */ + { + .vendor = PCI_ANY_ID, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_default_setup, + } +}; + +static inline int quirk_id_matches(u32 quirk_id, u32 dev_id) +{ + return quirk_id == PCI_ANY_ID || quirk_id == dev_id; +} + +static struct pci_serial_quirk *find_quirk(struct pci_dev *dev) +{ + struct pci_serial_quirk *quirk; + + for (quirk = pci_serial_quirks; ; quirk++) + if (quirk_id_matches(quirk->vendor, dev->vendor) && + quirk_id_matches(quirk->device, dev->device) && + quirk_id_matches(quirk->subvendor, dev->subsystem_vendor) && + quirk_id_matches(quirk->subdevice, dev->subsystem_device)) + break; + return quirk; +} + +/* + * This is the configuration table for all of the PCI serial boards + * which we support. It is directly indexed by the pci_board_num_t enum + * value, which is encoded in the pci_device_id PCI probe table's + * driver_data member. + * + * The makeup of these names are: + * pbn_bn{_bt}_n_baud{_offsetinhex} + * + * bn = PCI BAR number + * bt = Index using PCI BARs + * n = number of serial ports + * baud = baud rate + * offsetinhex = offset for each sequential port (in hex) + * + * This table is sorted by (in order): bn, bt, baud, offsetindex, n. + * + * Please note: in theory if n = 1, _bt infix should make no difference. + * ie, pbn_b0_1_115200 is the same as pbn_b0_bt_1_115200 + */ +enum pci_board_num_t { + pbn_default = 0, + + pbn_b0_1_115200, + pbn_b0_2_115200, + pbn_b0_4_115200, + pbn_b0_5_115200, + pbn_b0_8_115200, + + pbn_b0_1_921600, + pbn_b0_2_921600, + pbn_b0_4_921600, + + pbn_b0_2_1130000, + + pbn_b0_4_1152000, + + pbn_b0_4_1250000, + + pbn_b0_2_1843200, + pbn_b0_4_1843200, + + pbn_b0_1_3906250, + + pbn_b0_bt_1_115200, + pbn_b0_bt_2_115200, + pbn_b0_bt_4_115200, + pbn_b0_bt_8_115200, + + pbn_b0_bt_1_460800, + pbn_b0_bt_2_460800, + pbn_b0_bt_4_460800, + + pbn_b0_bt_1_921600, + pbn_b0_bt_2_921600, + pbn_b0_bt_4_921600, + pbn_b0_bt_8_921600, + + pbn_b1_1_115200, + pbn_b1_2_115200, + pbn_b1_4_115200, + pbn_b1_8_115200, + pbn_b1_16_115200, + + pbn_b1_1_921600, + pbn_b1_2_921600, + pbn_b1_4_921600, + pbn_b1_8_921600, + + pbn_b1_2_1250000, + + pbn_b1_bt_1_115200, + pbn_b1_bt_2_115200, + pbn_b1_bt_4_115200, + + pbn_b1_bt_2_921600, + + pbn_b1_1_1382400, + pbn_b1_2_1382400, + pbn_b1_4_1382400, + pbn_b1_8_1382400, + + pbn_b2_1_115200, + pbn_b2_2_115200, + pbn_b2_4_115200, + pbn_b2_8_115200, + + pbn_b2_1_460800, + pbn_b2_4_460800, + pbn_b2_8_460800, + pbn_b2_16_460800, + + pbn_b2_1_921600, + pbn_b2_4_921600, + pbn_b2_8_921600, + + pbn_b2_8_1152000, + + pbn_b2_bt_1_115200, + pbn_b2_bt_2_115200, + pbn_b2_bt_4_115200, + + pbn_b2_bt_2_921600, + pbn_b2_bt_4_921600, + + pbn_b3_2_115200, + pbn_b3_4_115200, + pbn_b3_8_115200, + + pbn_b4_bt_2_921600, + pbn_b4_bt_4_921600, + pbn_b4_bt_8_921600, + + /* + * Board-specific versions. + */ + pbn_panacom, + pbn_panacom2, + pbn_panacom4, + pbn_plx_romulus, + pbn_oxsemi, + pbn_oxsemi_1_3906250, + pbn_oxsemi_2_3906250, + pbn_oxsemi_4_3906250, + pbn_oxsemi_8_3906250, + pbn_intel_i960, + pbn_sgi_ioc3, + pbn_computone_4, + pbn_computone_6, + pbn_computone_8, + pbn_sbsxrsio, + pbn_pasemi_1682M, + pbn_ni8430_2, + pbn_ni8430_4, + pbn_ni8430_8, + pbn_ni8430_16, + pbn_ADDIDATA_PCIe_1_3906250, + pbn_ADDIDATA_PCIe_2_3906250, + pbn_ADDIDATA_PCIe_4_3906250, + pbn_ADDIDATA_PCIe_8_3906250, + pbn_ce4100_1_115200, + pbn_omegapci, + pbn_NETMOS9900_2s_115200, + pbn_brcm_trumanage, + pbn_fintek_4, + pbn_fintek_8, + pbn_fintek_12, + pbn_fintek_F81504A, + pbn_fintek_F81508A, + pbn_fintek_F81512A, + pbn_wch382_2, + pbn_wch384_4, + pbn_wch384_8, + pbn_pericom_PI7C9X7951, + pbn_pericom_PI7C9X7952, + pbn_pericom_PI7C9X7954, + pbn_pericom_PI7C9X7958, + pbn_sunix_pci_1s, + pbn_sunix_pci_2s, + pbn_sunix_pci_4s, + pbn_sunix_pci_8s, + pbn_sunix_pci_16s, + pbn_titan_1_4000000, + pbn_titan_2_4000000, + pbn_titan_4_4000000, + pbn_titan_8_4000000, + pbn_moxa8250_2p, + pbn_moxa8250_4p, + pbn_moxa8250_8p, +}; + +/* + * uart_offset - the space between channels + * reg_shift - describes how the UART registers are mapped + * to PCI memory by the card. + * For example IER register on SBS, Inc. PMC-OctPro is located at + * offset 0x10 from the UART base, while UART_IER is defined as 1 + * in include/linux/serial_reg.h, + * see first lines of serial_in() and serial_out() in 8250.c +*/ + +static struct pciserial_board pci_boards[] = { + [pbn_default] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_1_115200] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_2_115200] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_4_115200] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_5_115200] = { + .flags = FL_BASE0, + .num_ports = 5, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_8_115200] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_1_921600] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b0_2_921600] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b0_4_921600] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8, + }, + + [pbn_b0_2_1130000] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 1130000, + .uart_offset = 8, + }, + + [pbn_b0_4_1152000] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 1152000, + .uart_offset = 8, + }, + + [pbn_b0_4_1250000] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 1250000, + .uart_offset = 8, + }, + + [pbn_b0_2_1843200] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 1843200, + .uart_offset = 8, + }, + [pbn_b0_4_1843200] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 1843200, + .uart_offset = 8, + }, + + [pbn_b0_1_3906250] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 3906250, + .uart_offset = 8, + }, + + [pbn_b0_bt_1_115200] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_bt_2_115200] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_bt_4_115200] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_bt_8_115200] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 8, + .base_baud = 115200, + .uart_offset = 8, + }, + + [pbn_b0_bt_1_460800] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 1, + .base_baud = 460800, + .uart_offset = 8, + }, + [pbn_b0_bt_2_460800] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 460800, + .uart_offset = 8, + }, + [pbn_b0_bt_4_460800] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 460800, + .uart_offset = 8, + }, + + [pbn_b0_bt_1_921600] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b0_bt_2_921600] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b0_bt_4_921600] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b0_bt_8_921600] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 8, + }, + + [pbn_b1_1_115200] = { + .flags = FL_BASE1, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b1_2_115200] = { + .flags = FL_BASE1, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b1_4_115200] = { + .flags = FL_BASE1, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b1_8_115200] = { + .flags = FL_BASE1, + .num_ports = 8, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b1_16_115200] = { + .flags = FL_BASE1, + .num_ports = 16, + .base_baud = 115200, + .uart_offset = 8, + }, + + [pbn_b1_1_921600] = { + .flags = FL_BASE1, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b1_2_921600] = { + .flags = FL_BASE1, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b1_4_921600] = { + .flags = FL_BASE1, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b1_8_921600] = { + .flags = FL_BASE1, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b1_2_1250000] = { + .flags = FL_BASE1, + .num_ports = 2, + .base_baud = 1250000, + .uart_offset = 8, + }, + + [pbn_b1_bt_1_115200] = { + .flags = FL_BASE1|FL_BASE_BARS, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b1_bt_2_115200] = { + .flags = FL_BASE1|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b1_bt_4_115200] = { + .flags = FL_BASE1|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + + [pbn_b1_bt_2_921600] = { + .flags = FL_BASE1|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, + + [pbn_b1_1_1382400] = { + .flags = FL_BASE1, + .num_ports = 1, + .base_baud = 1382400, + .uart_offset = 8, + }, + [pbn_b1_2_1382400] = { + .flags = FL_BASE1, + .num_ports = 2, + .base_baud = 1382400, + .uart_offset = 8, + }, + [pbn_b1_4_1382400] = { + .flags = FL_BASE1, + .num_ports = 4, + .base_baud = 1382400, + .uart_offset = 8, + }, + [pbn_b1_8_1382400] = { + .flags = FL_BASE1, + .num_ports = 8, + .base_baud = 1382400, + .uart_offset = 8, + }, + + [pbn_b2_1_115200] = { + .flags = FL_BASE2, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b2_2_115200] = { + .flags = FL_BASE2, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b2_4_115200] = { + .flags = FL_BASE2, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b2_8_115200] = { + .flags = FL_BASE2, + .num_ports = 8, + .base_baud = 115200, + .uart_offset = 8, + }, + + [pbn_b2_1_460800] = { + .flags = FL_BASE2, + .num_ports = 1, + .base_baud = 460800, + .uart_offset = 8, + }, + [pbn_b2_4_460800] = { + .flags = FL_BASE2, + .num_ports = 4, + .base_baud = 460800, + .uart_offset = 8, + }, + [pbn_b2_8_460800] = { + .flags = FL_BASE2, + .num_ports = 8, + .base_baud = 460800, + .uart_offset = 8, + }, + [pbn_b2_16_460800] = { + .flags = FL_BASE2, + .num_ports = 16, + .base_baud = 460800, + .uart_offset = 8, + }, + + [pbn_b2_1_921600] = { + .flags = FL_BASE2, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b2_4_921600] = { + .flags = FL_BASE2, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b2_8_921600] = { + .flags = FL_BASE2, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 8, + }, + + [pbn_b2_8_1152000] = { + .flags = FL_BASE2, + .num_ports = 8, + .base_baud = 1152000, + .uart_offset = 8, + }, + + [pbn_b2_bt_1_115200] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b2_bt_2_115200] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b2_bt_4_115200] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + + [pbn_b2_bt_2_921600] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b2_bt_4_921600] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8, + }, + + [pbn_b3_2_115200] = { + .flags = FL_BASE3, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b3_4_115200] = { + .flags = FL_BASE3, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b3_8_115200] = { + .flags = FL_BASE3, + .num_ports = 8, + .base_baud = 115200, + .uart_offset = 8, + }, + + [pbn_b4_bt_2_921600] = { + .flags = FL_BASE4, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b4_bt_4_921600] = { + .flags = FL_BASE4, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b4_bt_8_921600] = { + .flags = FL_BASE4, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 8, + }, + + /* + * Entries following this are board-specific. + */ + + /* + * Panacom - IOMEM + */ + [pbn_panacom] = { + .flags = FL_BASE2, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 0x400, + .reg_shift = 7, + }, + [pbn_panacom2] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 0x400, + .reg_shift = 7, + }, + [pbn_panacom4] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 0x400, + .reg_shift = 7, + }, + + /* I think this entry is broken - the first_offset looks wrong --rmk */ + [pbn_plx_romulus] = { + .flags = FL_BASE2, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8 << 2, + .reg_shift = 2, + .first_offset = 0x03, + }, + + /* + * This board uses the size of PCI Base region 0 to + * signal now many ports are available + */ + [pbn_oxsemi] = { + .flags = FL_BASE0|FL_REGION_SZ_CAP, + .num_ports = 32, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_oxsemi_1_3906250] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_oxsemi_2_3906250] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_oxsemi_4_3906250] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_oxsemi_8_3906250] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + + + /* + * EKF addition for i960 Boards form EKF with serial port. + * Max 256 ports. + */ + [pbn_intel_i960] = { + .flags = FL_BASE0, + .num_ports = 32, + .base_baud = 921600, + .uart_offset = 8 << 2, + .reg_shift = 2, + .first_offset = 0x10000, + }, + [pbn_sgi_ioc3] = { + .flags = FL_BASE0|FL_NOIRQ, + .num_ports = 1, + .base_baud = 458333, + .uart_offset = 8, + .reg_shift = 0, + .first_offset = 0x20178, + }, + + /* + * Computone - uses IOMEM. + */ + [pbn_computone_4] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 0x40, + .reg_shift = 2, + .first_offset = 0x200, + }, + [pbn_computone_6] = { + .flags = FL_BASE0, + .num_ports = 6, + .base_baud = 921600, + .uart_offset = 0x40, + .reg_shift = 2, + .first_offset = 0x200, + }, + [pbn_computone_8] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 0x40, + .reg_shift = 2, + .first_offset = 0x200, + }, + [pbn_sbsxrsio] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 460800, + .uart_offset = 256, + .reg_shift = 4, + }, + /* + * PA Semi PWRficient PA6T-1682M on-chip UART + */ + [pbn_pasemi_1682M] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 8333333, + }, + /* + * National Instruments 843x + */ + [pbn_ni8430_16] = { + .flags = FL_BASE0, + .num_ports = 16, + .base_baud = 3686400, + .uart_offset = 0x10, + .first_offset = 0x800, + }, + [pbn_ni8430_8] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 3686400, + .uart_offset = 0x10, + .first_offset = 0x800, + }, + [pbn_ni8430_4] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 3686400, + .uart_offset = 0x10, + .first_offset = 0x800, + }, + [pbn_ni8430_2] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 3686400, + .uart_offset = 0x10, + .first_offset = 0x800, + }, + /* + * ADDI-DATA GmbH PCI-Express communication cards + */ + [pbn_ADDIDATA_PCIe_1_3906250] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_ADDIDATA_PCIe_2_3906250] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_ADDIDATA_PCIe_4_3906250] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_ADDIDATA_PCIe_8_3906250] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_ce4100_1_115200] = { + .flags = FL_BASE_BARS, + .num_ports = 2, + .base_baud = 921600, + .reg_shift = 2, + }, + [pbn_omegapci] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 115200, + .uart_offset = 0x200, + }, + [pbn_NETMOS9900_2s_115200] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 115200, + }, + [pbn_brcm_trumanage] = { + .flags = FL_BASE0, + .num_ports = 1, + .reg_shift = 2, + .base_baud = 115200, + }, + [pbn_fintek_4] = { + .num_ports = 4, + .uart_offset = 8, + .base_baud = 115200, + .first_offset = 0x40, + }, + [pbn_fintek_8] = { + .num_ports = 8, + .uart_offset = 8, + .base_baud = 115200, + .first_offset = 0x40, + }, + [pbn_fintek_12] = { + .num_ports = 12, + .uart_offset = 8, + .base_baud = 115200, + .first_offset = 0x40, + }, + [pbn_fintek_F81504A] = { + .num_ports = 4, + .uart_offset = 8, + .base_baud = 115200, + }, + [pbn_fintek_F81508A] = { + .num_ports = 8, + .uart_offset = 8, + .base_baud = 115200, + }, + [pbn_fintek_F81512A] = { + .num_ports = 12, + .uart_offset = 8, + .base_baud = 115200, + }, + [pbn_wch382_2] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + .first_offset = 0xC0, + }, + [pbn_wch384_4] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + .first_offset = 0xC0, + }, + [pbn_wch384_8] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 115200, + .uart_offset = 8, + .first_offset = 0x00, + }, + /* + * Pericom PI7C9X795[1248] Uno/Dual/Quad/Octal UART + */ + [pbn_pericom_PI7C9X7951] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 0x8, + }, + [pbn_pericom_PI7C9X7952] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 0x8, + }, + [pbn_pericom_PI7C9X7954] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 0x8, + }, + [pbn_pericom_PI7C9X7958] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 0x8, + }, + [pbn_sunix_pci_1s] = { + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 0x8, + }, + [pbn_sunix_pci_2s] = { + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 0x8, + }, + [pbn_sunix_pci_4s] = { + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 0x8, + }, + [pbn_sunix_pci_8s] = { + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 0x8, + }, + [pbn_sunix_pci_16s] = { + .num_ports = 16, + .base_baud = 921600, + .uart_offset = 0x8, + }, + [pbn_titan_1_4000000] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 4000000, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_titan_2_4000000] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 4000000, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_titan_4_4000000] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 4000000, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_titan_8_4000000] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 4000000, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_moxa8250_2p] = { + .flags = FL_BASE1, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 0x200, + }, + [pbn_moxa8250_4p] = { + .flags = FL_BASE1, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 0x200, + }, + [pbn_moxa8250_8p] = { + .flags = FL_BASE1, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 0x200, + }, +}; + +static const struct pci_device_id blacklist[] = { + /* softmodems */ + { PCI_VDEVICE(AL, 0x5457), }, /* ALi Corporation M5457 AC'97 Modem */ + { PCI_VDEVICE(MOTOROLA, 0x3052), }, /* Motorola Si3052-based modem */ + { PCI_DEVICE(0x1543, 0x3052), }, /* Si3052-based modem, default IDs */ + + /* multi-io cards handled by parport_serial */ + { PCI_DEVICE(0x4348, 0x7053), }, /* WCH CH353 2S1P */ + { PCI_DEVICE(0x4348, 0x5053), }, /* WCH CH353 1S1P */ + { PCI_DEVICE(0x1c00, 0x3250), }, /* WCH CH382 2S1P */ + + /* Intel platforms with MID UART */ + { PCI_VDEVICE(INTEL, 0x081b), }, + { PCI_VDEVICE(INTEL, 0x081c), }, + { PCI_VDEVICE(INTEL, 0x081d), }, + { PCI_VDEVICE(INTEL, 0x1191), }, + { PCI_VDEVICE(INTEL, 0x18d8), }, + { PCI_VDEVICE(INTEL, 0x19d8), }, + + /* Intel platforms with DesignWare UART */ + { PCI_VDEVICE(INTEL, 0x0936), }, + { PCI_VDEVICE(INTEL, 0x0f0a), }, + { PCI_VDEVICE(INTEL, 0x0f0c), }, + { PCI_VDEVICE(INTEL, 0x228a), }, + { PCI_VDEVICE(INTEL, 0x228c), }, + { PCI_VDEVICE(INTEL, 0x4b96), }, + { PCI_VDEVICE(INTEL, 0x4b97), }, + { PCI_VDEVICE(INTEL, 0x4b98), }, + { PCI_VDEVICE(INTEL, 0x4b99), }, + { PCI_VDEVICE(INTEL, 0x4b9a), }, + { PCI_VDEVICE(INTEL, 0x4b9b), }, + { PCI_VDEVICE(INTEL, 0x9ce3), }, + { PCI_VDEVICE(INTEL, 0x9ce4), }, + + /* Exar devices */ + { PCI_VDEVICE(EXAR, PCI_ANY_ID), }, + { PCI_VDEVICE(COMMTECH, PCI_ANY_ID), }, + + /* End of the black list */ + { } +}; + +static int serial_pci_is_class_communication(struct pci_dev *dev) +{ + /* + * If it is not a communications device or the programming + * interface is greater than 6, give up. + */ + if ((((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL) && + ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MULTISERIAL) && + ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) || + (dev->class & 0xff) > 6) + return -ENODEV; + + return 0; +} + +/* + * Given a complete unknown PCI device, try to use some heuristics to + * guess what the configuration might be, based on the pitiful PCI + * serial specs. Returns 0 on success, -ENODEV on failure. + */ +static int +serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board) +{ + int num_iomem, num_port, first_port = -1, i; + int rc; + + rc = serial_pci_is_class_communication(dev); + if (rc) + return rc; + + /* + * Should we try to make guesses for multiport serial devices later? + */ + if ((dev->class >> 8) == PCI_CLASS_COMMUNICATION_MULTISERIAL) + return -ENODEV; + + num_iomem = num_port = 0; + for (i = 0; i < PCI_STD_NUM_BARS; i++) { + if (pci_resource_flags(dev, i) & IORESOURCE_IO) { + num_port++; + if (first_port == -1) + first_port = i; + } + if (pci_resource_flags(dev, i) & IORESOURCE_MEM) + num_iomem++; + } + + /* + * If there is 1 or 0 iomem regions, and exactly one port, + * use it. We guess the number of ports based on the IO + * region size. + */ + if (num_iomem <= 1 && num_port == 1) { + board->flags = first_port; + board->num_ports = pci_resource_len(dev, first_port) / 8; + return 0; + } + + /* + * Now guess if we've got a board which indexes by BARs. + * Each IO BAR should be 8 bytes, and they should follow + * consecutively. + */ + first_port = -1; + num_port = 0; + for (i = 0; i < PCI_STD_NUM_BARS; i++) { + if (pci_resource_flags(dev, i) & IORESOURCE_IO && + pci_resource_len(dev, i) == 8 && + (first_port == -1 || (first_port + num_port) == i)) { + num_port++; + if (first_port == -1) + first_port = i; + } + } + + if (num_port > 1) { + board->flags = first_port | FL_BASE_BARS; + board->num_ports = num_port; + return 0; + } + + return -ENODEV; +} + +static inline int +serial_pci_matches(const struct pciserial_board *board, + const struct pciserial_board *guessed) +{ + return + board->num_ports == guessed->num_ports && + board->base_baud == guessed->base_baud && + board->uart_offset == guessed->uart_offset && + board->reg_shift == guessed->reg_shift && + board->first_offset == guessed->first_offset; +} + +struct serial_private * +pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board) +{ + struct uart_8250_port uart; + struct serial_private *priv; + struct pci_serial_quirk *quirk; + int rc, nr_ports, i; + + nr_ports = board->num_ports; + + /* + * Find an init and setup quirks. + */ + quirk = find_quirk(dev); + + /* + * Run the new-style initialization function. + * The initialization function returns: + * <0 - error + * 0 - use board->num_ports + * >0 - number of ports + */ + if (quirk->init) { + rc = quirk->init(dev); + if (rc < 0) { + priv = ERR_PTR(rc); + goto err_out; + } + if (rc) + nr_ports = rc; + } + + priv = kzalloc(sizeof(struct serial_private) + + sizeof(unsigned int) * nr_ports, + GFP_KERNEL); + if (!priv) { + priv = ERR_PTR(-ENOMEM); + goto err_deinit; + } + + priv->dev = dev; + priv->quirk = quirk; + + memset(&uart, 0, sizeof(uart)); + uart.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; + uart.port.uartclk = board->base_baud * 16; + + if (board->flags & FL_NOIRQ) { + uart.port.irq = 0; + } else { + if (pci_match_id(pci_use_msi, dev)) { + pci_dbg(dev, "Using MSI(-X) interrupts\n"); + pci_set_master(dev); + uart.port.flags &= ~UPF_SHARE_IRQ; + rc = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_ALL_TYPES); + } else { + pci_dbg(dev, "Using legacy interrupts\n"); + rc = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_LEGACY); + } + if (rc < 0) { + kfree(priv); + priv = ERR_PTR(rc); + goto err_deinit; + } + + uart.port.irq = pci_irq_vector(dev, 0); + } + + uart.port.dev = &dev->dev; + + for (i = 0; i < nr_ports; i++) { + if (quirk->setup(priv, board, &uart, i)) + break; + + pci_dbg(dev, "Setup PCI port: port %lx, irq %d, type %d\n", + uart.port.iobase, uart.port.irq, uart.port.iotype); + + priv->line[i] = serial8250_register_8250_port(&uart); + if (priv->line[i] < 0) { + pci_err(dev, + "Couldn't register serial port %lx, irq %d, type %d, error %d\n", + uart.port.iobase, uart.port.irq, + uart.port.iotype, priv->line[i]); + break; + } + } + priv->nr = i; + priv->board = board; + return priv; + +err_deinit: + if (quirk->exit) + quirk->exit(dev); +err_out: + return priv; +} +EXPORT_SYMBOL_GPL(pciserial_init_ports); + +static void pciserial_detach_ports(struct serial_private *priv) +{ + struct pci_serial_quirk *quirk; + int i; + + for (i = 0; i < priv->nr; i++) + serial8250_unregister_port(priv->line[i]); + + /* + * Find the exit quirks. + */ + quirk = find_quirk(priv->dev); + if (quirk->exit) + quirk->exit(priv->dev); +} + +void pciserial_remove_ports(struct serial_private *priv) +{ + pciserial_detach_ports(priv); + kfree(priv); +} +EXPORT_SYMBOL_GPL(pciserial_remove_ports); + +void pciserial_suspend_ports(struct serial_private *priv) +{ + int i; + + for (i = 0; i < priv->nr; i++) + if (priv->line[i] >= 0) + serial8250_suspend_port(priv->line[i]); + + /* + * Ensure that every init quirk is properly torn down + */ + if (priv->quirk->exit) + priv->quirk->exit(priv->dev); +} +EXPORT_SYMBOL_GPL(pciserial_suspend_ports); + +void pciserial_resume_ports(struct serial_private *priv) +{ + int i; + + /* + * Ensure that the board is correctly configured. + */ + if (priv->quirk->init) + priv->quirk->init(priv->dev); + + for (i = 0; i < priv->nr; i++) + if (priv->line[i] >= 0) + serial8250_resume_port(priv->line[i]); +} +EXPORT_SYMBOL_GPL(pciserial_resume_ports); + +/* + * Probe one serial board. Unfortunately, there is no rhyme nor reason + * to the arrangement of serial ports on a PCI card. + */ +static int +pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) +{ + struct pci_serial_quirk *quirk; + struct serial_private *priv; + const struct pciserial_board *board; + const struct pci_device_id *exclude; + struct pciserial_board tmp; + int rc; + + quirk = find_quirk(dev); + if (quirk->probe) { + rc = quirk->probe(dev); + if (rc) + return rc; + } + + if (ent->driver_data >= ARRAY_SIZE(pci_boards)) { + pci_err(dev, "invalid driver_data: %ld\n", ent->driver_data); + return -EINVAL; + } + + board = &pci_boards[ent->driver_data]; + + exclude = pci_match_id(blacklist, dev); + if (exclude) + return -ENODEV; + + rc = pcim_enable_device(dev); + pci_save_state(dev); + if (rc) + return rc; + + if (ent->driver_data == pbn_default) { + /* + * Use a copy of the pci_board entry for this; + * avoid changing entries in the table. + */ + memcpy(&tmp, board, sizeof(struct pciserial_board)); + board = &tmp; + + /* + * We matched one of our class entries. Try to + * determine the parameters of this board. + */ + rc = serial_pci_guess_board(dev, &tmp); + if (rc) + return rc; + } else { + /* + * We matched an explicit entry. If we are able to + * detect this boards settings with our heuristic, + * then we no longer need this entry. + */ + memcpy(&tmp, &pci_boards[pbn_default], + sizeof(struct pciserial_board)); + rc = serial_pci_guess_board(dev, &tmp); + if (rc == 0 && serial_pci_matches(board, &tmp)) + moan_device("Redundant entry in serial pci_table.", + dev); + } + + priv = pciserial_init_ports(dev, board); + if (IS_ERR(priv)) + return PTR_ERR(priv); + + pci_set_drvdata(dev, priv); + return 0; +} + +static void pciserial_remove_one(struct pci_dev *dev) +{ + struct serial_private *priv = pci_get_drvdata(dev); + + pciserial_remove_ports(priv); +} + +#ifdef CONFIG_PM_SLEEP +static int pciserial_suspend_one(struct device *dev) +{ + struct serial_private *priv = dev_get_drvdata(dev); + + if (priv) + pciserial_suspend_ports(priv); + + return 0; +} + +static int pciserial_resume_one(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct serial_private *priv = pci_get_drvdata(pdev); + int err; + + if (priv) { + /* + * The device may have been disabled. Re-enable it. + */ + err = pci_enable_device(pdev); + /* FIXME: We cannot simply error out here */ + if (err) + pci_err(pdev, "Unable to re-enable ports, trying to continue.\n"); + pciserial_resume_ports(priv); + } + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(pciserial_pm_ops, pciserial_suspend_one, + pciserial_resume_one); + +static const struct pci_device_id serial_pci_tbl[] = { + { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI1600, + PCI_DEVICE_ID_ADVANTECH_PCI1600_1611, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + /* Advantech use PCI_DEVICE_ID_ADVANTECH_PCI3620 (0x3620) as 'PCI_SUBVENDOR_ID' */ + { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620, + PCI_DEVICE_ID_ADVANTECH_PCI3620, 0x0001, 0, 0, + pbn_b2_8_921600 }, + /* Advantech also use 0x3618 and 0xf618 */ + { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3618, + PCI_DEVICE_ID_ADVANTECH_PCI3618, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCIf618, + PCI_DEVICE_ID_ADVANTECH_PCI3618, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0, + pbn_b1_8_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0, + pbn_b1_4_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0, + pbn_b1_2_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0, + pbn_b1_8_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0, + pbn_b1_4_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0, + pbn_b1_2_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485, 0, 0, + pbn_b1_8_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4, 0, 0, + pbn_b1_8_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485, 0, 0, + pbn_b1_4_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2, 0, 0, + pbn_b1_4_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485, 0, 0, + pbn_b1_2_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6, 0, 0, + pbn_b1_8_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1, 0, 0, + pbn_b1_8_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1, 0, 0, + pbn_b1_4_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_20MHZ, 0, 0, + pbn_b1_2_1250000 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_2, 0, 0, + pbn_b0_2_1843200 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_4, 0, 0, + pbn_b0_4_1843200 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, + PCI_VENDOR_ID_AFAVLAB, + PCI_SUBDEVICE_ID_AFAVLAB_P061, 0, 0, + pbn_b0_4_1152000 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_1_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM422, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_4_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM232, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_4_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM8, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_8_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_7803, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_8_460800 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM8, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_8_115200 }, + + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_GTEK_SERIAL2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_115200 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM200, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_921600 }, + /* + * VScom SPCOM800, from sl@s.pl + */ + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_8_921600 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_4_921600 }, + /* Unknown card - subdevice 0x1584 */ + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_VENDOR_ID_PLX, + PCI_SUBDEVICE_ID_UNKNOWN_0x1584, 0, 0, + pbn_b2_4_115200 }, + /* Unknown card - subdevice 0x1588 */ + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_VENDOR_ID_PLX, + PCI_SUBDEVICE_ID_UNKNOWN_0x1588, 0, 0, + pbn_b2_8_115200 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_KEYSPAN, + PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0, + pbn_panacom }, + { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_QUADMODEM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_panacom4 }, + { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_DUALMODEM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_panacom2 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, + PCI_VENDOR_ID_ESDGMBH, + PCI_DEVICE_ID_ESDGMBH_CPCIASIO4, 0, 0, + pbn_b2_4_115200 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIFAST, + PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0, + pbn_b2_4_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIFAST, + PCI_SUBDEVICE_ID_CHASE_PCIFAST8, 0, 0, + pbn_b2_8_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIFAST, + PCI_SUBDEVICE_ID_CHASE_PCIFAST16, 0, 0, + pbn_b2_16_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIFAST, + PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC, 0, 0, + pbn_b2_16_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIRAS, + PCI_SUBDEVICE_ID_CHASE_PCIRAS4, 0, 0, + pbn_b2_4_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIRAS, + PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0, + pbn_b2_8_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_EXSYS, + PCI_SUBDEVICE_ID_EXSYS_4055, 0, 0, + pbn_b2_4_115200 }, + /* + * Megawolf Romulus PCI Serial Card, from Mike Hudson + * (Exoray@isys.ca) + */ + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_ROMULUS, + 0x10b5, 0x106a, 0, 0, + pbn_plx_romulus }, + /* + * Quatech cards. These actually have configurable clocks but for + * now we just use the default. + * + * 100 series are RS232, 200 series RS422, + */ + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC100, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_4_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_2_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100E, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC200, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_2_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC200E, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC200, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_4_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100D, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_8_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100M, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_8_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCP100, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_4_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCP100, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_2_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCP200, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_4_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCP200, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_2_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCLP100, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_4_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCLP100, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SSCLP100, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_1_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCLP200, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_4_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCLP200, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SSCLP200, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_1_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESCLP100, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_8_115200 }, + + { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954, + PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4, + 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, + PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL, + 0, 0, + pbn_b0_4_1152000 }, + { PCI_VENDOR_ID_OXSEMI, 0x9505, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_921600 }, + + /* + * The below card is a little controversial since it is the + * subject of a PCI vendor/device ID clash. (See + * www.ussg.iu.edu/hypermail/linux/kernel/0303.1/0516.html). + * For now just used the hex ID 0x950a. + */ + { PCI_VENDOR_ID_OXSEMI, 0x950a, + PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_00, + 0, 0, pbn_b0_2_115200 }, + { PCI_VENDOR_ID_OXSEMI, 0x950a, + PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_30, + 0, 0, pbn_b0_2_115200 }, + { PCI_VENDOR_ID_OXSEMI, 0x950a, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_2_1130000 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_C950, + PCI_VENDOR_ID_OXSEMI, PCI_SUBDEVICE_ID_OXSEMI_C950, 0, 0, + pbn_b0_1_921600 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_115200 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_921600 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI958, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_8_1152000 }, + + /* + * Oxford Semiconductor Inc. Tornado PCI express device range. + */ + { PCI_VENDOR_ID_OXSEMI, 0xc101, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc105, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc11b, /* OXPCIe952 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc11f, /* OXPCIe952 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc120, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc124, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc138, /* OXPCIe952 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc13d, /* OXPCIe952 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc140, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc141, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc144, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc145, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc158, /* OXPCIe952 2 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_2_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc15d, /* OXPCIe952 2 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_2_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc208, /* OXPCIe954 4 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_4_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc20d, /* OXPCIe954 4 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_4_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc308, /* OXPCIe958 8 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_8_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc30d, /* OXPCIe958 8 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_8_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc40b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc40f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc41b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc41f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc42b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc42f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc43b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc43f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc44b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc44f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc45b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc45f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc46b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc46f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc47b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc47f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc48b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc48f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc49b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc49f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4ab, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4af, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4bb, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4bf, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4cb, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_3906250 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4cf, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_3906250 }, + /* + * Mainpine Inc. IQ Express "Rev3" utilizing OxSemi Tornado + */ + { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 1 Port V.34 Super-G3 Fax */ + PCI_VENDOR_ID_MAINPINE, 0x4001, 0, 0, + pbn_oxsemi_1_3906250 }, + { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 2 Port V.34 Super-G3 Fax */ + PCI_VENDOR_ID_MAINPINE, 0x4002, 0, 0, + pbn_oxsemi_2_3906250 }, + { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 4 Port V.34 Super-G3 Fax */ + PCI_VENDOR_ID_MAINPINE, 0x4004, 0, 0, + pbn_oxsemi_4_3906250 }, + { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 8 Port V.34 Super-G3 Fax */ + PCI_VENDOR_ID_MAINPINE, 0x4008, 0, 0, + pbn_oxsemi_8_3906250 }, + + /* + * Digi/IBM PCIe 2-port Async EIA-232 Adapter utilizing OxSemi Tornado + */ + { PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_2_OX_IBM, + PCI_SUBVENDOR_ID_IBM, PCI_ANY_ID, 0, 0, + pbn_oxsemi_2_3906250 }, + /* + * EndRun Technologies. PCI express device range. + * EndRun PTP/1588 has 2 Native UARTs utilizing OxSemi 952. + */ + { PCI_VENDOR_ID_ENDRUN, PCI_DEVICE_ID_ENDRUN_1588, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_2_3906250 }, + + /* + * SBS Technologies, Inc. P-Octal and PMC-OCTPRO cards, + * from skokodyn@yahoo.com + */ + { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, + PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO232, 0, 0, + pbn_sbsxrsio }, + { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, + PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO422, 0, 0, + pbn_sbsxrsio }, + { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, + PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL232, 0, 0, + pbn_sbsxrsio }, + { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, + PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL422, 0, 0, + pbn_sbsxrsio }, + + /* + * Digitan DS560-558, from jimd@esoft.com + */ + { PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_ATT_VENUS_MODEM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_1_115200 }, + + /* + * Titan Electronic cards + * The 400L and 800L have a custom setup quirk. + */ + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_2_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100L, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_1_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200L, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_2_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400L, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800L, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_8_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200I, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b4_bt_2_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400I, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b4_bt_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800I, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b4_bt_8_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400EH, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800EH, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800EHB, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100E, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_titan_1_4000000 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200E, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_titan_2_4000000 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400E, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_titan_4_4000000 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800E, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_titan_8_4000000 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EI, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_titan_2_4000000 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EISI, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_titan_2_4000000 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200V3, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400V3, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_410V3, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800V3, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800V3B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_1_460800 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_1_460800 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_1_460800 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_4_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_4_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_4_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_8_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_8_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_8_921600 }, + + /* + * Computone devices submitted by Doug McNash dmcnash@computone.com + */ + { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, + PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG4, + 0, 0, pbn_computone_4 }, + { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, + PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG8, + 0, 0, pbn_computone_8 }, + { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, + PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG6, + 0, 0, pbn_computone_6 }, + + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI95N, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi }, + { PCI_VENDOR_ID_TIMEDIA, PCI_DEVICE_ID_TIMEDIA_1889, + PCI_VENDOR_ID_TIMEDIA, PCI_ANY_ID, 0, 0, + pbn_b0_bt_1_921600 }, + + /* + * Sunix PCI serial boards + */ + { PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999, + PCI_VENDOR_ID_SUNIX, 0x0001, 0, 0, + pbn_sunix_pci_1s }, + { PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999, + PCI_VENDOR_ID_SUNIX, 0x0002, 0, 0, + pbn_sunix_pci_2s }, + { PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999, + PCI_VENDOR_ID_SUNIX, 0x0004, 0, 0, + pbn_sunix_pci_4s }, + { PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999, + PCI_VENDOR_ID_SUNIX, 0x0084, 0, 0, + pbn_sunix_pci_4s }, + { PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999, + PCI_VENDOR_ID_SUNIX, 0x0008, 0, 0, + pbn_sunix_pci_8s }, + { PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999, + PCI_VENDOR_ID_SUNIX, 0x0088, 0, 0, + pbn_sunix_pci_8s }, + { PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999, + PCI_VENDOR_ID_SUNIX, 0x0010, 0, 0, + pbn_sunix_pci_16s }, + + /* + * AFAVLAB serial card, from Harald Welte + */ + { PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P028, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_8_115200 }, + { PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P030, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_8_115200 }, + + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DSERIAL, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_A, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_A, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_A, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_460800 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_460800 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_PLUS, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_460800 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_A, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_460800 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_460800 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_SSERIAL, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_1_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_1_460800 }, + + /* + * Korenix Jetcard F0/F1 cards (JC1204, JC1208, JC1404, JC1408). + * Cards are identified by their subsystem vendor IDs, which + * (in hex) match the model number. + * + * Note that JC140x are RS422/485 cards which require ox950 + * ACR = 0x10, and as such are not currently fully supported. + */ + { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, + 0x1204, 0x0004, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, + 0x1208, 0x0004, 0, 0, + pbn_b0_4_921600 }, +/* { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, + 0x1402, 0x0002, 0, 0, + pbn_b0_2_921600 }, */ +/* { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, + 0x1404, 0x0004, 0, 0, + pbn_b0_4_921600 }, */ + { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF1, + 0x1208, 0x0004, 0, 0, + pbn_b0_4_921600 }, + + { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF2, + 0x1204, 0x0004, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF2, + 0x1208, 0x0004, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF3, + 0x1208, 0x0004, 0, 0, + pbn_b0_4_921600 }, + /* + * Dell Remote Access Card 4 - Tim_T_Murphy@Dell.com + */ + { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RAC4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_1_1382400 }, + + /* + * Dell Remote Access Card III - Tim_T_Murphy@Dell.com + */ + { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RACIII, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_1_1382400 }, + + /* + * RAStel 2 port modem, gerg@moreton.com.au + */ + { PCI_VENDOR_ID_MORETON, PCI_DEVICE_ID_RASTEL_2PORT, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_115200 }, + + /* + * EKF addition for i960 Boards form EKF with serial port + */ + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80960_RP, + 0xE4BF, PCI_ANY_ID, 0, 0, + pbn_intel_i960 }, + + /* + * Xircom Cardbus/Ethernet combos + */ + { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_X3201_MDM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_115200 }, + /* + * Xircom RBM56G cardbus modem - Dirk Arnold (temp entry) + */ + { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_RBM56G, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_115200 }, + + /* + * Untested PCI modems, sent in from various folks... + */ + + /* + * Elsa Model 56K PCI Modem, from Andreas Rath + */ + { PCI_VENDOR_ID_ROCKWELL, 0x1004, + 0x1048, 0x1500, 0, 0, + pbn_b1_1_115200 }, + + { PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, + 0xFF00, 0, 0, 0, + pbn_sgi_ioc3 }, + + /* + * HP Diva card + */ + { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA, + PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_RMP3, 0, 0, + pbn_b1_1_115200 }, + { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_5_115200 }, + { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_AUX, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_1_115200 }, + /* HPE PCI serial device */ + { PCI_VENDOR_ID_HP_3PAR, PCI_DEVICE_ID_HPE_PCI_SERIAL, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_1_115200 }, + + { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b3_2_115200 }, + { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b3_4_115200 }, + { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM8, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b3_8_115200 }, + /* + * Pericom PI7C9X795[1248] Uno/Dual/Quad/Octal UART + */ + { PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7951, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_pericom_PI7C9X7951 }, + { PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7952, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_pericom_PI7C9X7952 }, + { PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7954, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7958, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_pericom_PI7C9X7958 }, + /* + * ACCES I/O Products quad + */ + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SDB, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7952 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2S, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7952 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SDB, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4S, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_2DB, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7952 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7952 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4DB, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SMDB, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7952 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2SM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7952 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SMDB, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4SM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_1, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7951 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7952 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7952 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2S, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7952 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7952 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7952 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2SM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7952 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM422_4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM485_4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM422_8, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7958 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM485_8, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7958 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_8, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7958 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_8SM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7958 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4SM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + /* + * Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke) + */ + { PCI_VENDOR_ID_TOPIC, PCI_DEVICE_ID_TOPIC_TP560, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_115200 }, + /* + * ITE + */ + { PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8872, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b1_bt_1_115200 }, + + /* + * IntaShield IS-100 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0D60, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_1_115200 }, + /* + * IntaShield IS-200 + */ + { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS200, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0811 */ + pbn_b2_2_115200 }, + /* + * IntaShield IS-400 + */ + { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS400, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0dc0 */ + pbn_b2_4_115200 }, + /* Brainboxes Devices */ + /* + * Brainboxes UC-101 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0BA1, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + /* + * Brainboxes UC-235/246 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0AA1, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_1_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0AA2, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_1_115200 }, + /* + * Brainboxes UC-253/UC-734 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0CA1, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + /* + * Brainboxes UC-260/271/701/756 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0D21, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 0xffff00, + pbn_b2_4_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0E34, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 0xffff00, + pbn_b2_4_115200 }, + /* + * Brainboxes UP-189 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0AC1, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0AC2, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0AC3, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + /* + * Brainboxes UP-200 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0B21, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0B22, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0B23, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + /* + * Brainboxes UP-869 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0C01, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0C02, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0C03, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + /* + * Brainboxes UP-880 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0C21, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0C22, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0C23, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + /* + * Brainboxes UC-268 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0841, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_4_115200 }, + /* + * Brainboxes UC-275/279 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0881, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_8_115200 }, + /* + * Brainboxes UC-302 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x08E1, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x08E2, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x08E3, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + /* + * Brainboxes UC-310 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x08C1, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + /* + * Brainboxes UC-313 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x08A1, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x08A2, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x08A3, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + /* + * Brainboxes UC-320/324 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0A61, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_1_115200 }, + /* + * Brainboxes UC-346 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0B01, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_4_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0B02, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_4_115200 }, + /* + * Brainboxes UC-357 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0A81, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0A82, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0A83, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + /* + * Brainboxes UC-368 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0C41, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_4_115200 }, + /* + * Brainboxes UC-420 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0921, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_4_115200 }, + /* + * Brainboxes UC-607 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x09A1, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x09A2, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x09A3, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + /* + * Brainboxes UC-836 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0D41, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_4_115200 }, + /* + * Perle PCI-RAS cards + */ + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, + PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS4, + 0, 0, pbn_b2_4_921600 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, + PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS8, + 0, 0, pbn_b2_8_921600 }, + + /* + * Mainpine series cards: Fairly standard layout but fools + * parts of the autodetect in some cases and uses otherwise + * unmatched communications subclasses in the PCI Express case + */ + + { /* RockForceDUO */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0200, + 0, 0, pbn_b0_2_115200 }, + { /* RockForceQUATRO */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0300, + 0, 0, pbn_b0_4_115200 }, + { /* RockForceDUO+ */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0400, + 0, 0, pbn_b0_2_115200 }, + { /* RockForceQUATRO+ */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0500, + 0, 0, pbn_b0_4_115200 }, + { /* RockForce+ */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0600, + 0, 0, pbn_b0_2_115200 }, + { /* RockForce+ */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0700, + 0, 0, pbn_b0_4_115200 }, + { /* RockForceOCTO+ */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0800, + 0, 0, pbn_b0_8_115200 }, + { /* RockForceDUO+ */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0C00, + 0, 0, pbn_b0_2_115200 }, + { /* RockForceQUARTRO+ */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0D00, + 0, 0, pbn_b0_4_115200 }, + { /* RockForceOCTO+ */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x1D00, + 0, 0, pbn_b0_8_115200 }, + { /* RockForceD1 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x2000, + 0, 0, pbn_b0_1_115200 }, + { /* RockForceF1 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x2100, + 0, 0, pbn_b0_1_115200 }, + { /* RockForceD2 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x2200, + 0, 0, pbn_b0_2_115200 }, + { /* RockForceF2 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x2300, + 0, 0, pbn_b0_2_115200 }, + { /* RockForceD4 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x2400, + 0, 0, pbn_b0_4_115200 }, + { /* RockForceF4 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x2500, + 0, 0, pbn_b0_4_115200 }, + { /* RockForceD8 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x2600, + 0, 0, pbn_b0_8_115200 }, + { /* RockForceF8 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x2700, + 0, 0, pbn_b0_8_115200 }, + { /* IQ Express D1 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x3000, + 0, 0, pbn_b0_1_115200 }, + { /* IQ Express F1 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x3100, + 0, 0, pbn_b0_1_115200 }, + { /* IQ Express D2 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x3200, + 0, 0, pbn_b0_2_115200 }, + { /* IQ Express F2 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x3300, + 0, 0, pbn_b0_2_115200 }, + { /* IQ Express D4 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x3400, + 0, 0, pbn_b0_4_115200 }, + { /* IQ Express F4 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x3500, + 0, 0, pbn_b0_4_115200 }, + { /* IQ Express D8 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x3C00, + 0, 0, pbn_b0_8_115200 }, + { /* IQ Express F8 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x3D00, + 0, 0, pbn_b0_8_115200 }, + + + /* + * PA Semi PA6T-1682M on-chip UART + */ + { PCI_VENDOR_ID_PASEMI, 0xa004, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pasemi_1682M }, + + /* + * National Instruments + */ + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI23216, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_16_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2328, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_8_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2324, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_4_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2322, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_2_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2324I, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_4_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2322I, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_2_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_23216, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_16_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2328, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_8_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2324, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_4_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2322, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_2_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8422_2324, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_4_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8422_2322, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_2_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2322, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_2 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2322, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_2 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2324, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_4 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2324, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_4 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2328, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_8 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2328, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_8 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_23216, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_16 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_23216, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_16 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8432_2322, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_2 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8432_2322, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_2 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8432_2324, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_4 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8432_2324, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_4 }, + + /* + * MOXA + */ + { PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP102E, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_moxa8250_2p }, + { PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP102EL, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_moxa8250_2p }, + { PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP104EL_A, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_moxa8250_4p }, + { PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP114EL, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_moxa8250_4p }, + { PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP116E_A_A, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_moxa8250_8p }, + { PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP116E_A_B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_moxa8250_8p }, + { PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP118EL_A, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_moxa8250_8p }, + { PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP118E_A_I, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_moxa8250_8p }, + { PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP132EL, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_moxa8250_2p }, + { PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP134EL_A, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_moxa8250_4p }, + { PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP138E_A, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_moxa8250_8p }, + { PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP168EL_A, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_moxa8250_8p }, + + /* + * ADDI-DATA GmbH communication cards + */ + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7500, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_4_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7420, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_2_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7300, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_AMCC, + PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b1_8_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7500_2, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_4_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7420_2, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_2_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7300_2, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7500_3, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_4_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7420_3, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_2_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7300_3, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7800_3, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_8_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCIe7500, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_ADDIDATA_PCIe_4_3906250 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCIe7420, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_ADDIDATA_PCIe_2_3906250 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCIe7300, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_ADDIDATA_PCIe_1_3906250 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCIe7800, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_ADDIDATA_PCIe_8_3906250 }, + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835, + PCI_VENDOR_ID_IBM, 0x0299, + 0, 0, pbn_b0_bt_2_115200 }, + + /* + * other NetMos 9835 devices are most likely handled by the + * parport_serial driver, check drivers/parport/parport_serial.c + * before adding them here. + */ + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901, + 0xA000, 0x1000, + 0, 0, pbn_b0_1_115200 }, + + /* the 9901 is a rebranded 9912 */ + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9912, + 0xA000, 0x1000, + 0, 0, pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9922, + 0xA000, 0x1000, + 0, 0, pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9904, + 0xA000, 0x1000, + 0, 0, pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900, + 0xA000, 0x1000, + 0, 0, pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900, + 0xA000, 0x3002, + 0, 0, pbn_NETMOS9900_2s_115200 }, + + /* + * Best Connectivity and Rosewill PCI Multi I/O cards + */ + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, + 0xA000, 0x1000, + 0, 0, pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, + 0xA000, 0x3002, + 0, 0, pbn_b0_bt_2_115200 }, + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, + 0xA000, 0x3004, + 0, 0, pbn_b0_bt_4_115200 }, + /* Intel CE4100 */ + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CE4100_UART, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ce4100_1_115200 }, + + /* + * Cronyx Omega PCI + */ + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_CRONYX_OMEGA, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_omegapci }, + + /* + * Broadcom TruManage + */ + { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BROADCOM_TRUMANAGE, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_brcm_trumanage }, + + /* + * AgeStar as-prs2-009 + */ + { PCI_VENDOR_ID_AGESTAR, PCI_DEVICE_ID_AGESTAR_9375, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, pbn_b0_bt_2_115200 }, + + /* + * WCH CH353 series devices: The 2S1P is handled by parport_serial + * so not listed here. + */ + { PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH353_4S, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, pbn_b0_bt_4_115200 }, + + { PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH353_2S1PF, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, pbn_b0_bt_2_115200 }, + + { PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH355_4S, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, pbn_b0_bt_4_115200 }, + + { PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH382_2S, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, pbn_wch382_2 }, + + { PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH384_4S, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, pbn_wch384_4 }, + + { PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH384_8S, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, pbn_wch384_8 }, + /* + * Realtek RealManage + */ + { PCI_VENDOR_ID_REALTEK, 0x816a, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_REALTEK, 0x816b, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, pbn_b0_1_115200 }, + + /* Fintek PCI serial cards */ + { PCI_DEVICE(0x1c29, 0x1104), .driver_data = pbn_fintek_4 }, + { PCI_DEVICE(0x1c29, 0x1108), .driver_data = pbn_fintek_8 }, + { PCI_DEVICE(0x1c29, 0x1112), .driver_data = pbn_fintek_12 }, + { PCI_DEVICE(0x1c29, 0x1204), .driver_data = pbn_fintek_F81504A }, + { PCI_DEVICE(0x1c29, 0x1208), .driver_data = pbn_fintek_F81508A }, + { PCI_DEVICE(0x1c29, 0x1212), .driver_data = pbn_fintek_F81512A }, + + /* MKS Tenta SCOM-080x serial cards */ + { PCI_DEVICE(0x1601, 0x0800), .driver_data = pbn_b0_4_1250000 }, + { PCI_DEVICE(0x1601, 0xa801), .driver_data = pbn_b0_4_1250000 }, + + /* Amazon PCI serial device */ + { PCI_DEVICE(0x1d0f, 0x8250), .driver_data = pbn_b0_1_115200 }, + + /* + * These entries match devices with class COMMUNICATION_SERIAL, + * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL + */ + { PCI_ANY_ID, PCI_ANY_ID, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_SERIAL << 8, + 0xffff00, pbn_default }, + { PCI_ANY_ID, PCI_ANY_ID, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_MODEM << 8, + 0xffff00, pbn_default }, + { PCI_ANY_ID, PCI_ANY_ID, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, + 0xffff00, pbn_default }, + { 0, } +}; + +static pci_ers_result_t serial8250_io_error_detected(struct pci_dev *dev, + pci_channel_state_t state) +{ + struct serial_private *priv = pci_get_drvdata(dev); + + if (state == pci_channel_io_perm_failure) + return PCI_ERS_RESULT_DISCONNECT; + + if (priv) + pciserial_detach_ports(priv); + + pci_disable_device(dev); + + return PCI_ERS_RESULT_NEED_RESET; +} + +static pci_ers_result_t serial8250_io_slot_reset(struct pci_dev *dev) +{ + int rc; + + rc = pci_enable_device(dev); + + if (rc) + return PCI_ERS_RESULT_DISCONNECT; + + pci_restore_state(dev); + pci_save_state(dev); + + return PCI_ERS_RESULT_RECOVERED; +} + +static void serial8250_io_resume(struct pci_dev *dev) +{ + struct serial_private *priv = pci_get_drvdata(dev); + struct serial_private *new; + + if (!priv) + return; + + new = pciserial_init_ports(dev, priv->board); + if (!IS_ERR(new)) { + pci_set_drvdata(dev, new); + kfree(priv); + } +} + +static const struct pci_error_handlers serial8250_err_handler = { + .error_detected = serial8250_io_error_detected, + .slot_reset = serial8250_io_slot_reset, + .resume = serial8250_io_resume, +}; + +static struct pci_driver serial_pci_driver = { + .name = "serial", + .probe = pciserial_init_one, + .remove = pciserial_remove_one, + .driver = { + .pm = &pciserial_pm_ops, + }, + .id_table = serial_pci_tbl, + .err_handler = &serial8250_err_handler, +}; + +module_pci_driver(serial_pci_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Generic 8250/16x50 PCI serial probe module"); +MODULE_DEVICE_TABLE(pci, serial_pci_tbl); diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c new file mode 100644 index 000000000..de90d681b --- /dev/null +++ b/drivers/tty/serial/8250/8250_pnp.c @@ -0,0 +1,542 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Probe for 8250/16550-type ISAPNP serial ports. + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright (C) 2001 Russell King, All Rights Reserved. + * + * Ported to the Linux PnP Layer - (C) Adam Belay. + */ +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "8250.h" + +#define UNKNOWN_DEV 0x3000 +#define CIR_PORT 0x0800 + +static const struct pnp_device_id pnp_dev_table[] = { + /* Archtek America Corp. */ + /* Archtek SmartLink Modem 3334BT Plug & Play */ + { "AAC000F", 0 }, + /* Anchor Datacomm BV */ + /* SXPro 144 External Data Fax Modem Plug & Play */ + { "ADC0001", 0 }, + /* SXPro 288 External Data Fax Modem Plug & Play */ + { "ADC0002", 0 }, + /* PROLiNK 1456VH ISA PnP K56flex Fax Modem */ + { "AEI0250", 0 }, + /* Actiontec ISA PNP 56K X2 Fax Modem */ + { "AEI1240", 0 }, + /* Rockwell 56K ACF II Fax+Data+Voice Modem */ + { "AKY1021", 0 /*SPCI_FL_NO_SHIRQ*/ }, + /* + * ALi Fast Infrared Controller + * Native driver (ali-ircc) is broken so at least + * it can be used with irtty-sir. + */ + { "ALI5123", 0 }, + /* AZT3005 PnP SOUND DEVICE */ + { "AZT4001", 0 }, + /* Best Data Products Inc. Smart One 336F PnP Modem */ + { "BDP3336", 0 }, + /* Boca Research */ + /* Boca Complete Ofc Communicator 14.4 Data-FAX */ + { "BRI0A49", 0 }, + /* Boca Research 33,600 ACF Modem */ + { "BRI1400", 0 }, + /* Boca 33.6 Kbps Internal FD34FSVD */ + { "BRI3400", 0 }, + /* Boca 33.6 Kbps Internal FD34FSVD */ + { "BRI0A49", 0 }, + /* Best Data Products Inc. Smart One 336F PnP Modem */ + { "BDP3336", 0 }, + /* Computer Peripherals Inc */ + /* EuroViVa CommCenter-33.6 SP PnP */ + { "CPI4050", 0 }, + /* Creative Labs */ + /* Creative Labs Phone Blaster 28.8 DSVD PnP Voice */ + { "CTL3001", 0 }, + /* Creative Labs Modem Blaster 28.8 DSVD PnP Voice */ + { "CTL3011", 0 }, + /* Davicom ISA 33.6K Modem */ + { "DAV0336", 0 }, + /* Creative */ + /* Creative Modem Blaster Flash56 DI5601-1 */ + { "DMB1032", 0 }, + /* Creative Modem Blaster V.90 DI5660 */ + { "DMB2001", 0 }, + /* E-Tech */ + /* E-Tech CyberBULLET PC56RVP */ + { "ETT0002", 0 }, + /* FUJITSU */ + /* Fujitsu 33600 PnP-I2 R Plug & Play */ + { "FUJ0202", 0 }, + /* Fujitsu FMV-FX431 Plug & Play */ + { "FUJ0205", 0 }, + /* Fujitsu 33600 PnP-I4 R Plug & Play */ + { "FUJ0206", 0 }, + /* Fujitsu Fax Voice 33600 PNP-I5 R Plug & Play */ + { "FUJ0209", 0 }, + /* Archtek America Corp. */ + /* Archtek SmartLink Modem 3334BT Plug & Play */ + { "GVC000F", 0 }, + /* Archtek SmartLink Modem 3334BRV 33.6K Data Fax Voice */ + { "GVC0303", 0 }, + /* Hayes */ + /* Hayes Optima 288 V.34-V.FC + FAX + Voice Plug & Play */ + { "HAY0001", 0 }, + /* Hayes Optima 336 V.34 + FAX + Voice PnP */ + { "HAY000C", 0 }, + /* Hayes Optima 336B V.34 + FAX + Voice PnP */ + { "HAY000D", 0 }, + /* Hayes Accura 56K Ext Fax Modem PnP */ + { "HAY5670", 0 }, + /* Hayes Accura 56K Ext Fax Modem PnP */ + { "HAY5674", 0 }, + /* Hayes Accura 56K Fax Modem PnP */ + { "HAY5675", 0 }, + /* Hayes 288, V.34 + FAX */ + { "HAYF000", 0 }, + /* Hayes Optima 288 V.34 + FAX + Voice, Plug & Play */ + { "HAYF001", 0 }, + /* IBM */ + /* IBM Thinkpad 701 Internal Modem Voice */ + { "IBM0033", 0 }, + /* Intermec */ + /* Intermec CV60 touchscreen port */ + { "PNP4972", 0 }, + /* Intertex */ + /* Intertex 28k8 33k6 Voice EXT PnP */ + { "IXDC801", 0 }, + /* Intertex 33k6 56k Voice EXT PnP */ + { "IXDC901", 0 }, + /* Intertex 28k8 33k6 Voice SP EXT PnP */ + { "IXDD801", 0 }, + /* Intertex 33k6 56k Voice SP EXT PnP */ + { "IXDD901", 0 }, + /* Intertex 28k8 33k6 Voice SP INT PnP */ + { "IXDF401", 0 }, + /* Intertex 28k8 33k6 Voice SP EXT PnP */ + { "IXDF801", 0 }, + /* Intertex 33k6 56k Voice SP EXT PnP */ + { "IXDF901", 0 }, + /* Kortex International */ + /* KORTEX 28800 Externe PnP */ + { "KOR4522", 0 }, + /* KXPro 33.6 Vocal ASVD PnP */ + { "KORF661", 0 }, + /* Lasat */ + /* LASAT Internet 33600 PnP */ + { "LAS4040", 0 }, + /* Lasat Safire 560 PnP */ + { "LAS4540", 0 }, + /* Lasat Safire 336 PnP */ + { "LAS5440", 0 }, + /* Microcom, Inc. */ + /* Microcom TravelPorte FAST V.34 Plug & Play */ + { "MNP0281", 0 }, + /* Microcom DeskPorte V.34 FAST or FAST+ Plug & Play */ + { "MNP0336", 0 }, + /* Microcom DeskPorte FAST EP 28.8 Plug & Play */ + { "MNP0339", 0 }, + /* Microcom DeskPorte 28.8P Plug & Play */ + { "MNP0342", 0 }, + /* Microcom DeskPorte FAST ES 28.8 Plug & Play */ + { "MNP0500", 0 }, + /* Microcom DeskPorte FAST ES 28.8 Plug & Play */ + { "MNP0501", 0 }, + /* Microcom DeskPorte 28.8S Internal Plug & Play */ + { "MNP0502", 0 }, + /* Motorola */ + /* Motorola BitSURFR Plug & Play */ + { "MOT1105", 0 }, + /* Motorola TA210 Plug & Play */ + { "MOT1111", 0 }, + /* Motorola HMTA 200 (ISDN) Plug & Play */ + { "MOT1114", 0 }, + /* Motorola BitSURFR Plug & Play */ + { "MOT1115", 0 }, + /* Motorola Lifestyle 28.8 Internal */ + { "MOT1190", 0 }, + /* Motorola V.3400 Plug & Play */ + { "MOT1501", 0 }, + /* Motorola Lifestyle 28.8 V.34 Plug & Play */ + { "MOT1502", 0 }, + /* Motorola Power 28.8 V.34 Plug & Play */ + { "MOT1505", 0 }, + /* Motorola ModemSURFR External 28.8 Plug & Play */ + { "MOT1509", 0 }, + /* Motorola Premier 33.6 Desktop Plug & Play */ + { "MOT150A", 0 }, + /* Motorola VoiceSURFR 56K External PnP */ + { "MOT150F", 0 }, + /* Motorola ModemSURFR 56K External PnP */ + { "MOT1510", 0 }, + /* Motorola ModemSURFR 56K Internal PnP */ + { "MOT1550", 0 }, + /* Motorola ModemSURFR Internal 28.8 Plug & Play */ + { "MOT1560", 0 }, + /* Motorola Premier 33.6 Internal Plug & Play */ + { "MOT1580", 0 }, + /* Motorola OnlineSURFR 28.8 Internal Plug & Play */ + { "MOT15B0", 0 }, + /* Motorola VoiceSURFR 56K Internal PnP */ + { "MOT15F0", 0 }, + /* Com 1 */ + /* Deskline K56 Phone System PnP */ + { "MVX00A1", 0 }, + /* PC Rider K56 Phone System PnP */ + { "MVX00F2", 0 }, + /* NEC 98NOTE SPEAKER PHONE FAX MODEM(33600bps) */ + { "nEC8241", 0 }, + /* Pace 56 Voice Internal Plug & Play Modem */ + { "PMC2430", 0 }, + /* Generic */ + /* Generic standard PC COM port */ + { "PNP0500", 0 }, + /* Generic 16550A-compatible COM port */ + { "PNP0501", 0 }, + /* Compaq 14400 Modem */ + { "PNPC000", 0 }, + /* Compaq 2400/9600 Modem */ + { "PNPC001", 0 }, + /* Dial-Up Networking Serial Cable between 2 PCs */ + { "PNPC031", 0 }, + /* Dial-Up Networking Parallel Cable between 2 PCs */ + { "PNPC032", 0 }, + /* Standard 9600 bps Modem */ + { "PNPC100", 0 }, + /* Standard 14400 bps Modem */ + { "PNPC101", 0 }, + /* Standard 28800 bps Modem*/ + { "PNPC102", 0 }, + /* Standard Modem*/ + { "PNPC103", 0 }, + /* Standard 9600 bps Modem*/ + { "PNPC104", 0 }, + /* Standard 14400 bps Modem*/ + { "PNPC105", 0 }, + /* Standard 28800 bps Modem*/ + { "PNPC106", 0 }, + /* Standard Modem */ + { "PNPC107", 0 }, + /* Standard 9600 bps Modem */ + { "PNPC108", 0 }, + /* Standard 14400 bps Modem */ + { "PNPC109", 0 }, + /* Standard 28800 bps Modem */ + { "PNPC10A", 0 }, + /* Standard Modem */ + { "PNPC10B", 0 }, + /* Standard 9600 bps Modem */ + { "PNPC10C", 0 }, + /* Standard 14400 bps Modem */ + { "PNPC10D", 0 }, + /* Standard 28800 bps Modem */ + { "PNPC10E", 0 }, + /* Standard Modem */ + { "PNPC10F", 0 }, + /* Standard PCMCIA Card Modem */ + { "PNP2000", 0 }, + /* Rockwell */ + /* Modular Technology */ + /* Rockwell 33.6 DPF Internal PnP */ + /* Modular Technology 33.6 Internal PnP */ + { "ROK0030", 0 }, + /* Kortex International */ + /* KORTEX 14400 Externe PnP */ + { "ROK0100", 0 }, + /* Rockwell 28.8 */ + { "ROK4120", 0 }, + /* Viking Components, Inc */ + /* Viking 28.8 INTERNAL Fax+Data+Voice PnP */ + { "ROK4920", 0 }, + /* Rockwell */ + /* British Telecom */ + /* Modular Technology */ + /* Rockwell 33.6 DPF External PnP */ + /* BT Prologue 33.6 External PnP */ + /* Modular Technology 33.6 External PnP */ + { "RSS00A0", 0 }, + /* Viking 56K FAX INT */ + { "RSS0262", 0 }, + /* K56 par,VV,Voice,Speakphone,AudioSpan,PnP */ + { "RSS0250", 0 }, + /* SupraExpress 28.8 Data/Fax PnP modem */ + { "SUP1310", 0 }, + /* SupraExpress 336i PnP Voice Modem */ + { "SUP1381", 0 }, + /* SupraExpress 33.6 Data/Fax PnP modem */ + { "SUP1421", 0 }, + /* SupraExpress 33.6 Data/Fax PnP modem */ + { "SUP1590", 0 }, + /* SupraExpress 336i Sp ASVD */ + { "SUP1620", 0 }, + /* SupraExpress 33.6 Data/Fax PnP modem */ + { "SUP1760", 0 }, + /* SupraExpress 56i Sp Intl */ + { "SUP2171", 0 }, + /* Phoebe Micro */ + /* Phoebe Micro 33.6 Data Fax 1433VQH Plug & Play */ + { "TEX0011", 0 }, + /* Archtek America Corp. */ + /* Archtek SmartLink Modem 3334BT Plug & Play */ + { "UAC000F", 0 }, + /* 3Com Corp. */ + /* Gateway Telepath IIvi 33.6 */ + { "USR0000", 0 }, + /* U.S. Robotics Sporster 33.6K Fax INT PnP */ + { "USR0002", 0 }, + /* Sportster Vi 14.4 PnP FAX Voicemail */ + { "USR0004", 0 }, + /* U.S. Robotics 33.6K Voice INT PnP */ + { "USR0006", 0 }, + /* U.S. Robotics 33.6K Voice EXT PnP */ + { "USR0007", 0 }, + /* U.S. Robotics Courier V.Everything INT PnP */ + { "USR0009", 0 }, + /* U.S. Robotics 33.6K Voice INT PnP */ + { "USR2002", 0 }, + /* U.S. Robotics 56K Voice INT PnP */ + { "USR2070", 0 }, + /* U.S. Robotics 56K Voice EXT PnP */ + { "USR2080", 0 }, + /* U.S. Robotics 56K FAX INT */ + { "USR3031", 0 }, + /* U.S. Robotics 56K FAX INT */ + { "USR3050", 0 }, + /* U.S. Robotics 56K Voice INT PnP */ + { "USR3070", 0 }, + /* U.S. Robotics 56K Voice EXT PnP */ + { "USR3080", 0 }, + /* U.S. Robotics 56K Voice INT PnP */ + { "USR3090", 0 }, + /* U.S. Robotics 56K Message */ + { "USR9100", 0 }, + /* U.S. Robotics 56K FAX EXT PnP*/ + { "USR9160", 0 }, + /* U.S. Robotics 56K FAX INT PnP*/ + { "USR9170", 0 }, + /* U.S. Robotics 56K Voice EXT PnP*/ + { "USR9180", 0 }, + /* U.S. Robotics 56K Voice INT PnP*/ + { "USR9190", 0 }, + /* Wacom tablets */ + { "WACFXXX", 0 }, + /* Compaq touchscreen */ + { "FPI2002", 0 }, + /* Fujitsu Stylistic touchscreens */ + { "FUJ02B2", 0 }, + { "FUJ02B3", 0 }, + /* Fujitsu Stylistic LT touchscreens */ + { "FUJ02B4", 0 }, + /* Passive Fujitsu Stylistic touchscreens */ + { "FUJ02B6", 0 }, + { "FUJ02B7", 0 }, + { "FUJ02B8", 0 }, + { "FUJ02B9", 0 }, + { "FUJ02BC", 0 }, + /* Fujitsu Wacom Tablet PC device */ + { "FUJ02E5", 0 }, + /* Fujitsu P-series tablet PC device */ + { "FUJ02E6", 0 }, + /* Fujitsu Wacom 2FGT Tablet PC device */ + { "FUJ02E7", 0 }, + /* Fujitsu Wacom 1FGT Tablet PC device */ + { "FUJ02E9", 0 }, + /* + * LG C1 EXPRESS DUAL (C1-PB11A3) touch screen (actually a FUJ02E6 + * in disguise). + */ + { "LTS0001", 0 }, + /* Rockwell's (PORALiNK) 33600 INT PNP */ + { "WCI0003", 0 }, + /* Unknown PnP modems */ + { "PNPCXXX", UNKNOWN_DEV }, + /* More unknown PnP modems */ + { "PNPDXXX", UNKNOWN_DEV }, + /* + * Winbond CIR port, should not be probed. We should keep track of + * it to prevent the legacy serial driver from probing it. + */ + { "WEC1022", CIR_PORT }, + /* + * SMSC IrCC SIR/FIR port, should not be probed by serial driver as + * well so its own driver can bind to it. + */ + { "SMCF010", CIR_PORT }, + { "", 0 } +}; + +MODULE_DEVICE_TABLE(pnp, pnp_dev_table); + +static const char *modem_names[] = { + "MODEM", "Modem", "modem", "FAX", "Fax", "fax", + "56K", "56k", "K56", "33.6", "28.8", "14.4", + "33,600", "28,800", "14,400", "33.600", "28.800", "14.400", + "33600", "28800", "14400", "V.90", "V.34", "V.32", NULL +}; + +static bool check_name(const char *name) +{ + const char **tmp; + + for (tmp = modem_names; *tmp; tmp++) + if (strstr(name, *tmp)) + return true; + + return false; +} + +static bool check_resources(struct pnp_dev *dev) +{ + static const resource_size_t base[] = {0x2f8, 0x3f8, 0x2e8, 0x3e8}; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(base); i++) { + if (pnp_possible_config(dev, IORESOURCE_IO, base[i], 8)) + return true; + } + + return false; +} + +/* + * Given a complete unknown PnP device, try to use some heuristics to + * detect modems. Currently use such heuristic set: + * - dev->name or dev->bus->name must contain "modem" substring; + * - device must have only one IO region (8 byte long) with base address + * 0x2e8, 0x3e8, 0x2f8 or 0x3f8. + * + * Such detection looks very ugly, but can detect at least some of numerous + * PnP modems, alternatively we must hardcode all modems in pnp_devices[] + * table. + */ +static int serial_pnp_guess_board(struct pnp_dev *dev) +{ + if (!(check_name(pnp_dev_name(dev)) || + (dev->card && check_name(dev->card->name)))) + return -ENODEV; + + if (check_resources(dev)) + return 0; + + return -ENODEV; +} + +static int +serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) +{ + struct uart_8250_port uart, *port; + int ret, line, flags = dev_id->driver_data; + + if (flags & UNKNOWN_DEV) { + ret = serial_pnp_guess_board(dev); + if (ret < 0) + return ret; + } + + memset(&uart, 0, sizeof(uart)); + if (pnp_irq_valid(dev, 0)) + uart.port.irq = pnp_irq(dev, 0); + if ((flags & CIR_PORT) && pnp_port_valid(dev, 2)) { + uart.port.iobase = pnp_port_start(dev, 2); + uart.port.iotype = UPIO_PORT; + } else if (pnp_port_valid(dev, 0)) { + uart.port.iobase = pnp_port_start(dev, 0); + uart.port.iotype = UPIO_PORT; + } else if (pnp_mem_valid(dev, 0)) { + uart.port.mapbase = pnp_mem_start(dev, 0); + uart.port.iotype = UPIO_MEM; + uart.port.flags = UPF_IOREMAP; + } else + return -ENODEV; + + dev_dbg(&dev->dev, + "Setup PNP port: port %#lx, mem %#llx, irq %u, type %u\n", + uart.port.iobase, (unsigned long long)uart.port.mapbase, + uart.port.irq, uart.port.iotype); + + if (flags & CIR_PORT) { + uart.port.flags |= UPF_FIXED_PORT | UPF_FIXED_TYPE; + uart.port.type = PORT_8250_CIR; + } + + uart.port.flags |= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF; + if (pnp_irq_flags(dev, 0) & IORESOURCE_IRQ_SHAREABLE) + uart.port.flags |= UPF_SHARE_IRQ; + uart.port.uartclk = 1843200; + uart.port.dev = &dev->dev; + + line = serial8250_register_8250_port(&uart); + if (line < 0 || (flags & CIR_PORT)) + return -ENODEV; + + port = serial8250_get_port(line); + if (uart_console(&port->port)) + dev->capabilities |= PNP_CONSOLE; + + pnp_set_drvdata(dev, (void *)((long)line + 1)); + return 0; +} + +static void serial_pnp_remove(struct pnp_dev *dev) +{ + long line = (long)pnp_get_drvdata(dev); + + dev->capabilities &= ~PNP_CONSOLE; + if (line) + serial8250_unregister_port(line - 1); +} + +static int __maybe_unused serial_pnp_suspend(struct device *dev) +{ + long line = (long)dev_get_drvdata(dev); + + if (!line) + return -ENODEV; + serial8250_suspend_port(line - 1); + return 0; +} + +static int __maybe_unused serial_pnp_resume(struct device *dev) +{ + long line = (long)dev_get_drvdata(dev); + + if (!line) + return -ENODEV; + serial8250_resume_port(line - 1); + return 0; +} + +static SIMPLE_DEV_PM_OPS(serial_pnp_pm_ops, serial_pnp_suspend, serial_pnp_resume); + +static struct pnp_driver serial_pnp_driver = { + .name = "serial", + .probe = serial_pnp_probe, + .remove = serial_pnp_remove, + .driver = { + .pm = &serial_pnp_pm_ops, + }, + .id_table = pnp_dev_table, +}; + +int serial8250_pnp_init(void) +{ + return pnp_register_driver(&serial_pnp_driver); +} + +void serial8250_pnp_exit(void) +{ + pnp_unregister_driver(&serial_pnp_driver); +} + diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c new file mode 100644 index 000000000..8b49ac485 --- /dev/null +++ b/drivers/tty/serial/8250/8250_port.c @@ -0,0 +1,3436 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Base port operations for 8250/16550-type serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * Split from 8250_core.c, Copyright (C) 2001 Russell King. + * + * A note about mapbase / membase + * + * mapbase is the physical address of the IO port. + * membase is an 'ioremapped' cookie. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "8250.h" + +/* Nuvoton NPCM timeout register */ +#define UART_NPCM_TOR 7 +#define UART_NPCM_TOIE BIT(7) /* Timeout Interrupt Enable */ + +/* + * Debugging. + */ +#if 0 +#define DEBUG_AUTOCONF(fmt...) printk(fmt) +#else +#define DEBUG_AUTOCONF(fmt...) do { } while (0) +#endif + +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +/* + * Here we define the default xmit fifo size used for each type of UART. + */ +static const struct serial8250_config uart_config[] = { + [PORT_UNKNOWN] = { + .name = "unknown", + .fifo_size = 1, + .tx_loadsz = 1, + }, + [PORT_8250] = { + .name = "8250", + .fifo_size = 1, + .tx_loadsz = 1, + }, + [PORT_16450] = { + .name = "16450", + .fifo_size = 1, + .tx_loadsz = 1, + }, + [PORT_16550] = { + .name = "16550", + .fifo_size = 1, + .tx_loadsz = 1, + }, + [PORT_16550A] = { + .name = "16550A", + .fifo_size = 16, + .tx_loadsz = 16, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .rxtrig_bytes = {1, 4, 8, 14}, + .flags = UART_CAP_FIFO, + }, + [PORT_CIRRUS] = { + .name = "Cirrus", + .fifo_size = 1, + .tx_loadsz = 1, + }, + [PORT_16650] = { + .name = "ST16650", + .fifo_size = 1, + .tx_loadsz = 1, + .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, + }, + [PORT_16650V2] = { + .name = "ST16650V2", + .fifo_size = 32, + .tx_loadsz = 16, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 | + UART_FCR_T_TRIG_00, + .rxtrig_bytes = {8, 16, 24, 28}, + .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, + }, + [PORT_16750] = { + .name = "TI16750", + .fifo_size = 64, + .tx_loadsz = 64, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 | + UART_FCR7_64BYTE, + .rxtrig_bytes = {1, 16, 32, 56}, + .flags = UART_CAP_FIFO | UART_CAP_SLEEP | UART_CAP_AFE, + }, + [PORT_STARTECH] = { + .name = "Startech", + .fifo_size = 1, + .tx_loadsz = 1, + }, + [PORT_16C950] = { + .name = "16C950/954", + .fifo_size = 128, + .tx_loadsz = 128, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01, + .rxtrig_bytes = {16, 32, 112, 120}, + /* UART_CAP_EFR breaks billionon CF bluetooth card. */ + .flags = UART_CAP_FIFO | UART_CAP_SLEEP, + }, + [PORT_16654] = { + .name = "ST16654", + .fifo_size = 64, + .tx_loadsz = 32, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 | + UART_FCR_T_TRIG_10, + .rxtrig_bytes = {8, 16, 56, 60}, + .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, + }, + [PORT_16850] = { + .name = "XR16850", + .fifo_size = 128, + .tx_loadsz = 128, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, + }, + [PORT_RSA] = { + .name = "RSA", + .fifo_size = 2048, + .tx_loadsz = 2048, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_11, + .flags = UART_CAP_FIFO, + }, + [PORT_NS16550A] = { + .name = "NS16550A", + .fifo_size = 16, + .tx_loadsz = 16, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO | UART_NATSEMI, + }, + [PORT_XSCALE] = { + .name = "XScale", + .fifo_size = 32, + .tx_loadsz = 32, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO | UART_CAP_UUE | UART_CAP_RTOIE, + }, + [PORT_OCTEON] = { + .name = "OCTEON", + .fifo_size = 64, + .tx_loadsz = 64, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO, + }, + [PORT_AR7] = { + .name = "AR7", + .fifo_size = 16, + .tx_loadsz = 16, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00, + .flags = UART_CAP_FIFO /* | UART_CAP_AFE */, + }, + [PORT_U6_16550A] = { + .name = "U6_16550A", + .fifo_size = 64, + .tx_loadsz = 64, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO | UART_CAP_AFE, + }, + [PORT_TEGRA] = { + .name = "Tegra", + .fifo_size = 32, + .tx_loadsz = 8, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 | + UART_FCR_T_TRIG_01, + .rxtrig_bytes = {1, 4, 8, 14}, + .flags = UART_CAP_FIFO | UART_CAP_RTOIE, + }, + [PORT_XR17D15X] = { + .name = "XR17D15X", + .fifo_size = 64, + .tx_loadsz = 64, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO | UART_CAP_AFE | UART_CAP_EFR | + UART_CAP_SLEEP, + }, + [PORT_XR17V35X] = { + .name = "XR17V35X", + .fifo_size = 256, + .tx_loadsz = 256, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_11 | + UART_FCR_T_TRIG_11, + .flags = UART_CAP_FIFO | UART_CAP_AFE | UART_CAP_EFR | + UART_CAP_SLEEP, + }, + [PORT_LPC3220] = { + .name = "LPC3220", + .fifo_size = 64, + .tx_loadsz = 32, + .fcr = UART_FCR_DMA_SELECT | UART_FCR_ENABLE_FIFO | + UART_FCR_R_TRIG_00 | UART_FCR_T_TRIG_00, + .flags = UART_CAP_FIFO, + }, + [PORT_BRCM_TRUMANAGE] = { + .name = "TruManage", + .fifo_size = 1, + .tx_loadsz = 1024, + .flags = UART_CAP_HFIFO, + }, + [PORT_8250_CIR] = { + .name = "CIR port" + }, + [PORT_ALTR_16550_F32] = { + .name = "Altera 16550 FIFO32", + .fifo_size = 32, + .tx_loadsz = 32, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .rxtrig_bytes = {1, 8, 16, 30}, + .flags = UART_CAP_FIFO | UART_CAP_AFE, + }, + [PORT_ALTR_16550_F64] = { + .name = "Altera 16550 FIFO64", + .fifo_size = 64, + .tx_loadsz = 64, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .rxtrig_bytes = {1, 16, 32, 62}, + .flags = UART_CAP_FIFO | UART_CAP_AFE, + }, + [PORT_ALTR_16550_F128] = { + .name = "Altera 16550 FIFO128", + .fifo_size = 128, + .tx_loadsz = 128, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .rxtrig_bytes = {1, 32, 64, 126}, + .flags = UART_CAP_FIFO | UART_CAP_AFE, + }, + /* + * tx_loadsz is set to 63-bytes instead of 64-bytes to implement + * workaround of errata A-008006 which states that tx_loadsz should + * be configured less than Maximum supported fifo bytes. + */ + [PORT_16550A_FSL64] = { + .name = "16550A_FSL64", + .fifo_size = 64, + .tx_loadsz = 63, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 | + UART_FCR7_64BYTE, + .flags = UART_CAP_FIFO, + }, + [PORT_RT2880] = { + .name = "Palmchip BK-3103", + .fifo_size = 16, + .tx_loadsz = 16, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .rxtrig_bytes = {1, 4, 8, 14}, + .flags = UART_CAP_FIFO, + }, + [PORT_DA830] = { + .name = "TI DA8xx/66AK2x", + .fifo_size = 16, + .tx_loadsz = 16, + .fcr = UART_FCR_DMA_SELECT | UART_FCR_ENABLE_FIFO | + UART_FCR_R_TRIG_10, + .rxtrig_bytes = {1, 4, 8, 14}, + .flags = UART_CAP_FIFO | UART_CAP_AFE, + }, + [PORT_MTK_BTIF] = { + .name = "MediaTek BTIF", + .fifo_size = 16, + .tx_loadsz = 16, + .fcr = UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, + .flags = UART_CAP_FIFO, + }, + [PORT_NPCM] = { + .name = "Nuvoton 16550", + .fifo_size = 16, + .tx_loadsz = 16, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, + .rxtrig_bytes = {1, 4, 8, 14}, + .flags = UART_CAP_FIFO, + }, + [PORT_SUNIX] = { + .name = "Sunix", + .fifo_size = 128, + .tx_loadsz = 128, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .rxtrig_bytes = {1, 32, 64, 112}, + .flags = UART_CAP_FIFO | UART_CAP_SLEEP, + }, +}; + +/* Uart divisor latch read */ +static int default_serial_dl_read(struct uart_8250_port *up) +{ + /* Assign these in pieces to truncate any bits above 7. */ + unsigned char dll = serial_in(up, UART_DLL); + unsigned char dlm = serial_in(up, UART_DLM); + + return dll | dlm << 8; +} + +/* Uart divisor latch write */ +static void default_serial_dl_write(struct uart_8250_port *up, int value) +{ + serial_out(up, UART_DLL, value & 0xff); + serial_out(up, UART_DLM, value >> 8 & 0xff); +} + +#ifdef CONFIG_SERIAL_8250_RT288X + +/* Au1x00/RT288x UART hardware has a weird register layout */ +static const s8 au_io_in_map[8] = { + 0, /* UART_RX */ + 2, /* UART_IER */ + 3, /* UART_IIR */ + 5, /* UART_LCR */ + 6, /* UART_MCR */ + 7, /* UART_LSR */ + 8, /* UART_MSR */ + -1, /* UART_SCR (unmapped) */ +}; + +static const s8 au_io_out_map[8] = { + 1, /* UART_TX */ + 2, /* UART_IER */ + 4, /* UART_FCR */ + 5, /* UART_LCR */ + 6, /* UART_MCR */ + -1, /* UART_LSR (unmapped) */ + -1, /* UART_MSR (unmapped) */ + -1, /* UART_SCR (unmapped) */ +}; + +unsigned int au_serial_in(struct uart_port *p, int offset) +{ + if (offset >= ARRAY_SIZE(au_io_in_map)) + return UINT_MAX; + offset = au_io_in_map[offset]; + if (offset < 0) + return UINT_MAX; + return __raw_readl(p->membase + (offset << p->regshift)); +} + +void au_serial_out(struct uart_port *p, int offset, int value) +{ + if (offset >= ARRAY_SIZE(au_io_out_map)) + return; + offset = au_io_out_map[offset]; + if (offset < 0) + return; + __raw_writel(value, p->membase + (offset << p->regshift)); +} + +/* Au1x00 haven't got a standard divisor latch */ +static int au_serial_dl_read(struct uart_8250_port *up) +{ + return __raw_readl(up->port.membase + 0x28); +} + +static void au_serial_dl_write(struct uart_8250_port *up, int value) +{ + __raw_writel(value, up->port.membase + 0x28); +} + +#endif + +static unsigned int hub6_serial_in(struct uart_port *p, int offset) +{ + offset = offset << p->regshift; + outb(p->hub6 - 1 + offset, p->iobase); + return inb(p->iobase + 1); +} + +static void hub6_serial_out(struct uart_port *p, int offset, int value) +{ + offset = offset << p->regshift; + outb(p->hub6 - 1 + offset, p->iobase); + outb(value, p->iobase + 1); +} + +static unsigned int mem_serial_in(struct uart_port *p, int offset) +{ + offset = offset << p->regshift; + return readb(p->membase + offset); +} + +static void mem_serial_out(struct uart_port *p, int offset, int value) +{ + offset = offset << p->regshift; + writeb(value, p->membase + offset); +} + +static void mem16_serial_out(struct uart_port *p, int offset, int value) +{ + offset = offset << p->regshift; + writew(value, p->membase + offset); +} + +static unsigned int mem16_serial_in(struct uart_port *p, int offset) +{ + offset = offset << p->regshift; + return readw(p->membase + offset); +} + +static void mem32_serial_out(struct uart_port *p, int offset, int value) +{ + offset = offset << p->regshift; + writel(value, p->membase + offset); +} + +static unsigned int mem32_serial_in(struct uart_port *p, int offset) +{ + offset = offset << p->regshift; + return readl(p->membase + offset); +} + +static void mem32be_serial_out(struct uart_port *p, int offset, int value) +{ + offset = offset << p->regshift; + iowrite32be(value, p->membase + offset); +} + +static unsigned int mem32be_serial_in(struct uart_port *p, int offset) +{ + offset = offset << p->regshift; + return ioread32be(p->membase + offset); +} + +static unsigned int io_serial_in(struct uart_port *p, int offset) +{ + offset = offset << p->regshift; + return inb(p->iobase + offset); +} + +static void io_serial_out(struct uart_port *p, int offset, int value) +{ + offset = offset << p->regshift; + outb(value, p->iobase + offset); +} + +static int serial8250_default_handle_irq(struct uart_port *port); + +static void set_io_from_upio(struct uart_port *p) +{ + struct uart_8250_port *up = up_to_u8250p(p); + + up->dl_read = default_serial_dl_read; + up->dl_write = default_serial_dl_write; + + switch (p->iotype) { + case UPIO_HUB6: + p->serial_in = hub6_serial_in; + p->serial_out = hub6_serial_out; + break; + + case UPIO_MEM: + p->serial_in = mem_serial_in; + p->serial_out = mem_serial_out; + break; + + case UPIO_MEM16: + p->serial_in = mem16_serial_in; + p->serial_out = mem16_serial_out; + break; + + case UPIO_MEM32: + p->serial_in = mem32_serial_in; + p->serial_out = mem32_serial_out; + break; + + case UPIO_MEM32BE: + p->serial_in = mem32be_serial_in; + p->serial_out = mem32be_serial_out; + break; + +#ifdef CONFIG_SERIAL_8250_RT288X + case UPIO_AU: + p->serial_in = au_serial_in; + p->serial_out = au_serial_out; + up->dl_read = au_serial_dl_read; + up->dl_write = au_serial_dl_write; + break; +#endif + + default: + p->serial_in = io_serial_in; + p->serial_out = io_serial_out; + break; + } + /* Remember loaded iotype */ + up->cur_iotype = p->iotype; + p->handle_irq = serial8250_default_handle_irq; +} + +static void +serial_port_out_sync(struct uart_port *p, int offset, int value) +{ + switch (p->iotype) { + case UPIO_MEM: + case UPIO_MEM16: + case UPIO_MEM32: + case UPIO_MEM32BE: + case UPIO_AU: + p->serial_out(p, offset, value); + p->serial_in(p, UART_LCR); /* safe, no side-effects */ + break; + default: + p->serial_out(p, offset, value); + } +} + +/* + * FIFO support. + */ +static void serial8250_clear_fifos(struct uart_8250_port *p) +{ + if (p->capabilities & UART_CAP_FIFO) { + serial_out(p, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_out(p, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + serial_out(p, UART_FCR, 0); + } +} + +static enum hrtimer_restart serial8250_em485_handle_start_tx(struct hrtimer *t); +static enum hrtimer_restart serial8250_em485_handle_stop_tx(struct hrtimer *t); + +void serial8250_clear_and_reinit_fifos(struct uart_8250_port *p) +{ + serial8250_clear_fifos(p); + serial_out(p, UART_FCR, p->fcr); +} +EXPORT_SYMBOL_GPL(serial8250_clear_and_reinit_fifos); + +void serial8250_rpm_get(struct uart_8250_port *p) +{ + if (!(p->capabilities & UART_CAP_RPM)) + return; + pm_runtime_get_sync(p->port.dev); +} +EXPORT_SYMBOL_GPL(serial8250_rpm_get); + +void serial8250_rpm_put(struct uart_8250_port *p) +{ + if (!(p->capabilities & UART_CAP_RPM)) + return; + pm_runtime_mark_last_busy(p->port.dev); + pm_runtime_put_autosuspend(p->port.dev); +} +EXPORT_SYMBOL_GPL(serial8250_rpm_put); + +/** + * serial8250_em485_init() - put uart_8250_port into rs485 emulating + * @p: uart_8250_port port instance + * + * The function is used to start rs485 software emulating on the + * &struct uart_8250_port* @p. Namely, RTS is switched before/after + * transmission. The function is idempotent, so it is safe to call it + * multiple times. + * + * The caller MUST enable interrupt on empty shift register before + * calling serial8250_em485_init(). This interrupt is not a part of + * 8250 standard, but implementation defined. + * + * The function is supposed to be called from .rs485_config callback + * or from any other callback protected with p->port.lock spinlock. + * + * See also serial8250_em485_destroy() + * + * Return 0 - success, -errno - otherwise + */ +static int serial8250_em485_init(struct uart_8250_port *p) +{ + if (p->em485) + goto deassert_rts; + + p->em485 = kmalloc(sizeof(struct uart_8250_em485), GFP_ATOMIC); + if (!p->em485) + return -ENOMEM; + + hrtimer_init(&p->em485->stop_tx_timer, CLOCK_MONOTONIC, + HRTIMER_MODE_REL); + hrtimer_init(&p->em485->start_tx_timer, CLOCK_MONOTONIC, + HRTIMER_MODE_REL); + p->em485->stop_tx_timer.function = &serial8250_em485_handle_stop_tx; + p->em485->start_tx_timer.function = &serial8250_em485_handle_start_tx; + p->em485->port = p; + p->em485->active_timer = NULL; + p->em485->tx_stopped = true; + +deassert_rts: + if (p->em485->tx_stopped) + p->rs485_stop_tx(p); + + return 0; +} + +/** + * serial8250_em485_destroy() - put uart_8250_port into normal state + * @p: uart_8250_port port instance + * + * The function is used to stop rs485 software emulating on the + * &struct uart_8250_port* @p. The function is idempotent, so it is safe to + * call it multiple times. + * + * The function is supposed to be called from .rs485_config callback + * or from any other callback protected with p->port.lock spinlock. + * + * See also serial8250_em485_init() + */ +void serial8250_em485_destroy(struct uart_8250_port *p) +{ + if (!p->em485) + return; + + hrtimer_cancel(&p->em485->start_tx_timer); + hrtimer_cancel(&p->em485->stop_tx_timer); + + kfree(p->em485); + p->em485 = NULL; +} +EXPORT_SYMBOL_GPL(serial8250_em485_destroy); + +/** + * serial8250_em485_config() - generic ->rs485_config() callback + * @port: uart port + * @rs485: rs485 settings + * + * Generic callback usable by 8250 uart drivers to activate rs485 settings + * if the uart is incapable of driving RTS as a Transmit Enable signal in + * hardware, relying on software emulation instead. + */ +int serial8250_em485_config(struct uart_port *port, struct serial_rs485 *rs485) +{ + struct uart_8250_port *up = up_to_u8250p(port); + + /* pick sane settings if the user hasn't */ + if (!!(rs485->flags & SER_RS485_RTS_ON_SEND) == + !!(rs485->flags & SER_RS485_RTS_AFTER_SEND)) { + rs485->flags |= SER_RS485_RTS_ON_SEND; + rs485->flags &= ~SER_RS485_RTS_AFTER_SEND; + } + + gpiod_set_value(port->rs485_term_gpio, + rs485->flags & SER_RS485_TERMINATE_BUS); + + /* + * Both serial8250_em485_init() and serial8250_em485_destroy() + * are idempotent. + */ + if (rs485->flags & SER_RS485_ENABLED) + return serial8250_em485_init(up); + + serial8250_em485_destroy(up); + return 0; +} +EXPORT_SYMBOL_GPL(serial8250_em485_config); + +/* + * These two wrappers ensure that enable_runtime_pm_tx() can be called more than + * once and disable_runtime_pm_tx() will still disable RPM because the fifo is + * empty and the HW can idle again. + */ +void serial8250_rpm_get_tx(struct uart_8250_port *p) +{ + unsigned char rpm_active; + + if (!(p->capabilities & UART_CAP_RPM)) + return; + + rpm_active = xchg(&p->rpm_tx_active, 1); + if (rpm_active) + return; + pm_runtime_get_sync(p->port.dev); +} +EXPORT_SYMBOL_GPL(serial8250_rpm_get_tx); + +void serial8250_rpm_put_tx(struct uart_8250_port *p) +{ + unsigned char rpm_active; + + if (!(p->capabilities & UART_CAP_RPM)) + return; + + rpm_active = xchg(&p->rpm_tx_active, 0); + if (!rpm_active) + return; + pm_runtime_mark_last_busy(p->port.dev); + pm_runtime_put_autosuspend(p->port.dev); +} +EXPORT_SYMBOL_GPL(serial8250_rpm_put_tx); + +/* + * IER sleep support. UARTs which have EFRs need the "extended + * capability" bit enabled. Note that on XR16C850s, we need to + * reset LCR to write to IER. + */ +static void serial8250_set_sleep(struct uart_8250_port *p, int sleep) +{ + unsigned char lcr = 0, efr = 0; + + serial8250_rpm_get(p); + + if (p->capabilities & UART_CAP_SLEEP) { + if (p->capabilities & UART_CAP_EFR) { + lcr = serial_in(p, UART_LCR); + efr = serial_in(p, UART_EFR); + serial_out(p, UART_LCR, UART_LCR_CONF_MODE_B); + serial_out(p, UART_EFR, UART_EFR_ECB); + serial_out(p, UART_LCR, 0); + } + serial_out(p, UART_IER, sleep ? UART_IERX_SLEEP : 0); + if (p->capabilities & UART_CAP_EFR) { + serial_out(p, UART_LCR, UART_LCR_CONF_MODE_B); + serial_out(p, UART_EFR, efr); + serial_out(p, UART_LCR, lcr); + } + } + + serial8250_rpm_put(p); +} + +#ifdef CONFIG_SERIAL_8250_RSA +/* + * Attempts to turn on the RSA FIFO. Returns zero on failure. + * We set the port uart clock rate if we succeed. + */ +static int __enable_rsa(struct uart_8250_port *up) +{ + unsigned char mode; + int result; + + mode = serial_in(up, UART_RSA_MSR); + result = mode & UART_RSA_MSR_FIFO; + + if (!result) { + serial_out(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO); + mode = serial_in(up, UART_RSA_MSR); + result = mode & UART_RSA_MSR_FIFO; + } + + if (result) + up->port.uartclk = SERIAL_RSA_BAUD_BASE * 16; + + return result; +} + +static void enable_rsa(struct uart_8250_port *up) +{ + if (up->port.type == PORT_RSA) { + if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) { + spin_lock_irq(&up->port.lock); + __enable_rsa(up); + spin_unlock_irq(&up->port.lock); + } + if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) + serial_out(up, UART_RSA_FRR, 0); + } +} + +/* + * Attempts to turn off the RSA FIFO. Returns zero on failure. + * It is unknown why interrupts were disabled in here. However, + * the caller is expected to preserve this behaviour by grabbing + * the spinlock before calling this function. + */ +static void disable_rsa(struct uart_8250_port *up) +{ + unsigned char mode; + int result; + + if (up->port.type == PORT_RSA && + up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) { + spin_lock_irq(&up->port.lock); + + mode = serial_in(up, UART_RSA_MSR); + result = !(mode & UART_RSA_MSR_FIFO); + + if (!result) { + serial_out(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO); + mode = serial_in(up, UART_RSA_MSR); + result = !(mode & UART_RSA_MSR_FIFO); + } + + if (result) + up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16; + spin_unlock_irq(&up->port.lock); + } +} +#endif /* CONFIG_SERIAL_8250_RSA */ + +/* + * This is a quickie test to see how big the FIFO is. + * It doesn't work at all the time, more's the pity. + */ +static int size_fifo(struct uart_8250_port *up) +{ + unsigned char old_fcr, old_mcr, old_lcr; + unsigned short old_dl; + int count; + + old_lcr = serial_in(up, UART_LCR); + serial_out(up, UART_LCR, 0); + old_fcr = serial_in(up, UART_FCR); + old_mcr = serial8250_in_MCR(up); + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + serial8250_out_MCR(up, UART_MCR_LOOP); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); + old_dl = serial_dl_read(up); + serial_dl_write(up, 0x0001); + serial_out(up, UART_LCR, 0x03); + for (count = 0; count < 256; count++) + serial_out(up, UART_TX, count); + mdelay(20);/* FIXME - schedule_timeout */ + for (count = 0; (serial_in(up, UART_LSR) & UART_LSR_DR) && + (count < 256); count++) + serial_in(up, UART_RX); + serial_out(up, UART_FCR, old_fcr); + serial8250_out_MCR(up, old_mcr); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); + serial_dl_write(up, old_dl); + serial_out(up, UART_LCR, old_lcr); + + return count; +} + +/* + * Read UART ID using the divisor method - set DLL and DLM to zero + * and the revision will be in DLL and device type in DLM. We + * preserve the device state across this. + */ +static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p) +{ + unsigned char old_lcr; + unsigned int id, old_dl; + + old_lcr = serial_in(p, UART_LCR); + serial_out(p, UART_LCR, UART_LCR_CONF_MODE_A); + old_dl = serial_dl_read(p); + serial_dl_write(p, 0); + id = serial_dl_read(p); + serial_dl_write(p, old_dl); + + serial_out(p, UART_LCR, old_lcr); + + return id; +} + +/* + * This is a helper routine to autodetect StarTech/Exar/Oxsemi UART's. + * When this function is called we know it is at least a StarTech + * 16650 V2, but it might be one of several StarTech UARTs, or one of + * its clones. (We treat the broken original StarTech 16650 V1 as a + * 16550, and why not? Startech doesn't seem to even acknowledge its + * existence.) + * + * What evil have men's minds wrought... + */ +static void autoconfig_has_efr(struct uart_8250_port *up) +{ + unsigned int id1, id2, id3, rev; + + /* + * Everything with an EFR has SLEEP + */ + up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP; + + /* + * First we check to see if it's an Oxford Semiconductor UART. + * + * If we have to do this here because some non-National + * Semiconductor clone chips lock up if you try writing to the + * LSR register (which serial_icr_read does) + */ + + /* + * Check for Oxford Semiconductor 16C950. + * + * EFR [4] must be set else this test fails. + * + * This shouldn't be necessary, but Mike Hudson (Exoray@isys.ca) + * claims that it's needed for 952 dual UART's (which are not + * recommended for new designs). + */ + up->acr = 0; + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_out(up, UART_EFR, UART_EFR_ECB); + serial_out(up, UART_LCR, 0x00); + id1 = serial_icr_read(up, UART_ID1); + id2 = serial_icr_read(up, UART_ID2); + id3 = serial_icr_read(up, UART_ID3); + rev = serial_icr_read(up, UART_REV); + + DEBUG_AUTOCONF("950id=%02x:%02x:%02x:%02x ", id1, id2, id3, rev); + + if (id1 == 0x16 && id2 == 0xC9 && + (id3 == 0x50 || id3 == 0x52 || id3 == 0x54)) { + up->port.type = PORT_16C950; + + /* + * Enable work around for the Oxford Semiconductor 952 rev B + * chip which causes it to seriously miscalculate baud rates + * when DLL is 0. + */ + if (id3 == 0x52 && rev == 0x01) + up->bugs |= UART_BUG_QUOT; + return; + } + + /* + * We check for a XR16C850 by setting DLL and DLM to 0, and then + * reading back DLL and DLM. The chip type depends on the DLM + * value read back: + * 0x10 - XR16C850 and the DLL contains the chip revision. + * 0x12 - XR16C2850. + * 0x14 - XR16C854. + */ + id1 = autoconfig_read_divisor_id(up); + DEBUG_AUTOCONF("850id=%04x ", id1); + + id2 = id1 >> 8; + if (id2 == 0x10 || id2 == 0x12 || id2 == 0x14) { + up->port.type = PORT_16850; + return; + } + + /* + * It wasn't an XR16C850. + * + * We distinguish between the '654 and the '650 by counting + * how many bytes are in the FIFO. I'm using this for now, + * since that's the technique that was sent to me in the + * serial driver update, but I'm not convinced this works. + * I've had problems doing this in the past. -TYT + */ + if (size_fifo(up) == 64) + up->port.type = PORT_16654; + else + up->port.type = PORT_16650V2; +} + +/* + * We detected a chip without a FIFO. Only two fall into + * this category - the original 8250 and the 16450. The + * 16450 has a scratch register (accessible with LCR=0) + */ +static void autoconfig_8250(struct uart_8250_port *up) +{ + unsigned char scratch, status1, status2; + + up->port.type = PORT_8250; + + scratch = serial_in(up, UART_SCR); + serial_out(up, UART_SCR, 0xa5); + status1 = serial_in(up, UART_SCR); + serial_out(up, UART_SCR, 0x5a); + status2 = serial_in(up, UART_SCR); + serial_out(up, UART_SCR, scratch); + + if (status1 == 0xa5 && status2 == 0x5a) + up->port.type = PORT_16450; +} + +static int broken_efr(struct uart_8250_port *up) +{ + /* + * Exar ST16C2550 "A2" devices incorrectly detect as + * having an EFR, and report an ID of 0x0201. See + * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html + */ + if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16) + return 1; + + return 0; +} + +/* + * We know that the chip has FIFOs. Does it have an EFR? The + * EFR is located in the same register position as the IIR and + * we know the top two bits of the IIR are currently set. The + * EFR should contain zero. Try to read the EFR. + */ +static void autoconfig_16550a(struct uart_8250_port *up) +{ + unsigned char status1, status2; + unsigned int iersave; + + up->port.type = PORT_16550A; + up->capabilities |= UART_CAP_FIFO; + + if (!IS_ENABLED(CONFIG_SERIAL_8250_16550A_VARIANTS) && + !(up->port.flags & UPF_FULL_PROBE)) + return; + + /* + * Check for presence of the EFR when DLAB is set. + * Only ST16C650V1 UARTs pass this test. + */ + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); + if (serial_in(up, UART_EFR) == 0) { + serial_out(up, UART_EFR, 0xA8); + if (serial_in(up, UART_EFR) != 0) { + DEBUG_AUTOCONF("EFRv1 "); + up->port.type = PORT_16650; + up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP; + } else { + serial_out(up, UART_LCR, 0); + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR7_64BYTE); + status1 = serial_in(up, UART_IIR) >> 5; + serial_out(up, UART_FCR, 0); + serial_out(up, UART_LCR, 0); + + if (status1 == 7) + up->port.type = PORT_16550A_FSL64; + else + DEBUG_AUTOCONF("Motorola 8xxx DUART "); + } + serial_out(up, UART_EFR, 0); + return; + } + + /* + * Maybe it requires 0xbf to be written to the LCR. + * (other ST16C650V2 UARTs, TI16C752A, etc) + */ + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + if (serial_in(up, UART_EFR) == 0 && !broken_efr(up)) { + DEBUG_AUTOCONF("EFRv2 "); + autoconfig_has_efr(up); + return; + } + + /* + * Check for a National Semiconductor SuperIO chip. + * Attempt to switch to bank 2, read the value of the LOOP bit + * from EXCR1. Switch back to bank 0, change it in MCR. Then + * switch back to bank 2, read it from EXCR1 again and check + * it's changed. If so, set baud_base in EXCR2 to 921600. -- dwmw2 + */ + serial_out(up, UART_LCR, 0); + status1 = serial8250_in_MCR(up); + serial_out(up, UART_LCR, 0xE0); + status2 = serial_in(up, 0x02); /* EXCR1 */ + + if (!((status2 ^ status1) & UART_MCR_LOOP)) { + serial_out(up, UART_LCR, 0); + serial8250_out_MCR(up, status1 ^ UART_MCR_LOOP); + serial_out(up, UART_LCR, 0xE0); + status2 = serial_in(up, 0x02); /* EXCR1 */ + serial_out(up, UART_LCR, 0); + serial8250_out_MCR(up, status1); + + if ((status2 ^ status1) & UART_MCR_LOOP) { + unsigned short quot; + + serial_out(up, UART_LCR, 0xE0); + + quot = serial_dl_read(up); + quot <<= 3; + + if (ns16550a_goto_highspeed(up)) + serial_dl_write(up, quot); + + serial_out(up, UART_LCR, 0); + + up->port.uartclk = 921600*16; + up->port.type = PORT_NS16550A; + up->capabilities |= UART_NATSEMI; + return; + } + } + + /* + * No EFR. Try to detect a TI16750, which only sets bit 5 of + * the IIR when 64 byte FIFO mode is enabled when DLAB is set. + * Try setting it with and without DLAB set. Cheap clones + * set bit 5 without DLAB set. + */ + serial_out(up, UART_LCR, 0); + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); + status1 = serial_in(up, UART_IIR) >> 5; + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); + status2 = serial_in(up, UART_IIR) >> 5; + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_out(up, UART_LCR, 0); + + DEBUG_AUTOCONF("iir1=%d iir2=%d ", status1, status2); + + if (status1 == 6 && status2 == 7) { + up->port.type = PORT_16750; + up->capabilities |= UART_CAP_AFE | UART_CAP_SLEEP; + return; + } + + /* + * Try writing and reading the UART_IER_UUE bit (b6). + * If it works, this is probably one of the Xscale platform's + * internal UARTs. + * We're going to explicitly set the UUE bit to 0 before + * trying to write and read a 1 just to make sure it's not + * already a 1 and maybe locked there before we even start start. + */ + iersave = serial_in(up, UART_IER); + serial_out(up, UART_IER, iersave & ~UART_IER_UUE); + if (!(serial_in(up, UART_IER) & UART_IER_UUE)) { + /* + * OK it's in a known zero state, try writing and reading + * without disturbing the current state of the other bits. + */ + serial_out(up, UART_IER, iersave | UART_IER_UUE); + if (serial_in(up, UART_IER) & UART_IER_UUE) { + /* + * It's an Xscale. + * We'll leave the UART_IER_UUE bit set to 1 (enabled). + */ + DEBUG_AUTOCONF("Xscale "); + up->port.type = PORT_XSCALE; + up->capabilities |= UART_CAP_UUE | UART_CAP_RTOIE; + return; + } + } else { + /* + * If we got here we couldn't force the IER_UUE bit to 0. + * Log it and continue. + */ + DEBUG_AUTOCONF("Couldn't force IER_UUE to 0 "); + } + serial_out(up, UART_IER, iersave); + + /* + * We distinguish between 16550A and U6 16550A by counting + * how many bytes are in the FIFO. + */ + if (up->port.type == PORT_16550A && size_fifo(up) == 64) { + up->port.type = PORT_U6_16550A; + up->capabilities |= UART_CAP_AFE; + } +} + +/* + * This routine is called by rs_init() to initialize a specific serial + * port. It determines what type of UART chip this serial port is + * using: 8250, 16450, 16550, 16550A. The important question is + * whether or not this UART is a 16550A or not, since this will + * determine whether or not we can use its FIFO features or not. + */ +static void autoconfig(struct uart_8250_port *up) +{ + unsigned char status1, scratch, scratch2, scratch3; + unsigned char save_lcr, save_mcr; + struct uart_port *port = &up->port; + unsigned long flags; + unsigned int old_capabilities; + + if (!port->iobase && !port->mapbase && !port->membase) + return; + + DEBUG_AUTOCONF("%s: autoconf (0x%04lx, 0x%p): ", + port->name, port->iobase, port->membase); + + /* + * We really do need global IRQs disabled here - we're going to + * be frobbing the chips IRQ enable register to see if it exists. + */ + spin_lock_irqsave(&port->lock, flags); + + up->capabilities = 0; + up->bugs = 0; + + if (!(port->flags & UPF_BUGGY_UART)) { + /* + * Do a simple existence test first; if we fail this, + * there's no point trying anything else. + * + * 0x80 is used as a nonsense port to prevent against + * false positives due to ISA bus float. The + * assumption is that 0x80 is a non-existent port; + * which should be safe since include/asm/io.h also + * makes this assumption. + * + * Note: this is safe as long as MCR bit 4 is clear + * and the device is in "PC" mode. + */ + scratch = serial_in(up, UART_IER); + serial_out(up, UART_IER, 0); +#ifdef __i386__ + outb(0xff, 0x080); +#endif + /* + * Mask out IER[7:4] bits for test as some UARTs (e.g. TL + * 16C754B) allow only to modify them if an EFR bit is set. + */ + scratch2 = serial_in(up, UART_IER) & 0x0f; + serial_out(up, UART_IER, 0x0F); +#ifdef __i386__ + outb(0, 0x080); +#endif + scratch3 = serial_in(up, UART_IER) & 0x0f; + serial_out(up, UART_IER, scratch); + if (scratch2 != 0 || scratch3 != 0x0F) { + /* + * We failed; there's nothing here + */ + spin_unlock_irqrestore(&port->lock, flags); + DEBUG_AUTOCONF("IER test failed (%02x, %02x) ", + scratch2, scratch3); + goto out; + } + } + + save_mcr = serial8250_in_MCR(up); + save_lcr = serial_in(up, UART_LCR); + + /* + * Check to see if a UART is really there. Certain broken + * internal modems based on the Rockwell chipset fail this + * test, because they apparently don't implement the loopback + * test mode. So this test is skipped on the COM 1 through + * COM 4 ports. This *should* be safe, since no board + * manufacturer would be stupid enough to design a board + * that conflicts with COM 1-4 --- we hope! + */ + if (!(port->flags & UPF_SKIP_TEST)) { + serial8250_out_MCR(up, UART_MCR_LOOP | 0x0A); + status1 = serial_in(up, UART_MSR) & 0xF0; + serial8250_out_MCR(up, save_mcr); + if (status1 != 0x90) { + spin_unlock_irqrestore(&port->lock, flags); + DEBUG_AUTOCONF("LOOP test failed (%02x) ", + status1); + goto out; + } + } + + /* + * We're pretty sure there's a port here. Lets find out what + * type of port it is. The IIR top two bits allows us to find + * out if it's 8250 or 16450, 16550, 16550A or later. This + * determines what we test for next. + * + * We also initialise the EFR (if any) to zero for later. The + * EFR occupies the same register location as the FCR and IIR. + */ + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_out(up, UART_EFR, 0); + serial_out(up, UART_LCR, 0); + + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO); + + /* Assign this as it is to truncate any bits above 7. */ + scratch = serial_in(up, UART_IIR); + + switch (scratch >> 6) { + case 0: + autoconfig_8250(up); + break; + case 1: + port->type = PORT_UNKNOWN; + break; + case 2: + port->type = PORT_16550; + break; + case 3: + autoconfig_16550a(up); + break; + } + +#ifdef CONFIG_SERIAL_8250_RSA + /* + * Only probe for RSA ports if we got the region. + */ + if (port->type == PORT_16550A && up->probe & UART_PROBE_RSA && + __enable_rsa(up)) + port->type = PORT_RSA; +#endif + + serial_out(up, UART_LCR, save_lcr); + + port->fifosize = uart_config[up->port.type].fifo_size; + old_capabilities = up->capabilities; + up->capabilities = uart_config[port->type].flags; + up->tx_loadsz = uart_config[port->type].tx_loadsz; + + if (port->type == PORT_UNKNOWN) + goto out_lock; + + /* + * Reset the UART. + */ +#ifdef CONFIG_SERIAL_8250_RSA + if (port->type == PORT_RSA) + serial_out(up, UART_RSA_FRR, 0); +#endif + serial8250_out_MCR(up, save_mcr); + serial8250_clear_fifos(up); + serial_in(up, UART_RX); + if (up->capabilities & UART_CAP_UUE) + serial_out(up, UART_IER, UART_IER_UUE); + else + serial_out(up, UART_IER, 0); + +out_lock: + spin_unlock_irqrestore(&port->lock, flags); + + /* + * Check if the device is a Fintek F81216A + */ + if (port->type == PORT_16550A && port->iotype == UPIO_PORT) + fintek_8250_probe(up); + + if (up->capabilities != old_capabilities) { + dev_warn(port->dev, "detected caps %08x should be %08x\n", + old_capabilities, up->capabilities); + } +out: + DEBUG_AUTOCONF("iir=%d ", scratch); + DEBUG_AUTOCONF("type=%s\n", uart_config[port->type].name); +} + +static void autoconfig_irq(struct uart_8250_port *up) +{ + struct uart_port *port = &up->port; + unsigned char save_mcr, save_ier; + unsigned char save_ICP = 0; + unsigned int ICP = 0; + unsigned long irqs; + int irq; + + if (port->flags & UPF_FOURPORT) { + ICP = (port->iobase & 0xfe0) | 0x1f; + save_ICP = inb_p(ICP); + outb_p(0x80, ICP); + inb_p(ICP); + } + + if (uart_console(port)) + console_lock(); + + /* forget possible initially masked and pending IRQ */ + probe_irq_off(probe_irq_on()); + save_mcr = serial8250_in_MCR(up); + save_ier = serial_in(up, UART_IER); + serial8250_out_MCR(up, UART_MCR_OUT1 | UART_MCR_OUT2); + + irqs = probe_irq_on(); + serial8250_out_MCR(up, 0); + udelay(10); + if (port->flags & UPF_FOURPORT) { + serial8250_out_MCR(up, UART_MCR_DTR | UART_MCR_RTS); + } else { + serial8250_out_MCR(up, + UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2); + } + serial_out(up, UART_IER, 0x0f); /* enable all intrs */ + serial_in(up, UART_LSR); + serial_in(up, UART_RX); + serial_in(up, UART_IIR); + serial_in(up, UART_MSR); + serial_out(up, UART_TX, 0xFF); + udelay(20); + irq = probe_irq_off(irqs); + + serial8250_out_MCR(up, save_mcr); + serial_out(up, UART_IER, save_ier); + + if (port->flags & UPF_FOURPORT) + outb_p(save_ICP, ICP); + + if (uart_console(port)) + console_unlock(); + + port->irq = (irq > 0) ? irq : 0; +} + +static void serial8250_stop_rx(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + + serial8250_rpm_get(up); + + up->ier &= ~(UART_IER_RLSI | UART_IER_RDI); + up->port.read_status_mask &= ~UART_LSR_DR; + serial_port_out(port, UART_IER, up->ier); + + serial8250_rpm_put(up); +} + +/** + * serial8250_em485_stop_tx() - generic ->rs485_stop_tx() callback + * @p: uart 8250 port + * + * Generic callback usable by 8250 uart drivers to stop rs485 transmission. + */ +void serial8250_em485_stop_tx(struct uart_8250_port *p) +{ + unsigned char mcr = serial8250_in_MCR(p); + + if (p->port.rs485.flags & SER_RS485_RTS_AFTER_SEND) + mcr |= UART_MCR_RTS; + else + mcr &= ~UART_MCR_RTS; + serial8250_out_MCR(p, mcr); + + /* + * Empty the RX FIFO, we are not interested in anything + * received during the half-duplex transmission. + * Enable previously disabled RX interrupts. + */ + if (!(p->port.rs485.flags & SER_RS485_RX_DURING_TX)) { + serial8250_clear_and_reinit_fifos(p); + + p->ier |= UART_IER_RLSI | UART_IER_RDI; + serial_port_out(&p->port, UART_IER, p->ier); + } +} +EXPORT_SYMBOL_GPL(serial8250_em485_stop_tx); + +static enum hrtimer_restart serial8250_em485_handle_stop_tx(struct hrtimer *t) +{ + struct uart_8250_em485 *em485; + struct uart_8250_port *p; + unsigned long flags; + + em485 = container_of(t, struct uart_8250_em485, stop_tx_timer); + p = em485->port; + + serial8250_rpm_get(p); + spin_lock_irqsave(&p->port.lock, flags); + if (em485->active_timer == &em485->stop_tx_timer) { + p->rs485_stop_tx(p); + em485->active_timer = NULL; + em485->tx_stopped = true; + } + spin_unlock_irqrestore(&p->port.lock, flags); + serial8250_rpm_put(p); + return HRTIMER_NORESTART; +} + +static void start_hrtimer_ms(struct hrtimer *hrt, unsigned long msec) +{ + long sec = msec / 1000; + long nsec = (msec % 1000) * 1000000; + ktime_t t = ktime_set(sec, nsec); + + hrtimer_start(hrt, t, HRTIMER_MODE_REL); +} + +static void __stop_tx_rs485(struct uart_8250_port *p) +{ + struct uart_8250_em485 *em485 = p->em485; + + /* + * rs485_stop_tx() is going to set RTS according to config + * AND flush RX FIFO if required. + */ + if (p->port.rs485.delay_rts_after_send > 0) { + em485->active_timer = &em485->stop_tx_timer; + start_hrtimer_ms(&em485->stop_tx_timer, + p->port.rs485.delay_rts_after_send); + } else { + p->rs485_stop_tx(p); + em485->active_timer = NULL; + em485->tx_stopped = true; + } +} + +static inline void __do_stop_tx(struct uart_8250_port *p) +{ + if (serial8250_clear_THRI(p)) + serial8250_rpm_put_tx(p); +} + +static inline void __stop_tx(struct uart_8250_port *p) +{ + struct uart_8250_em485 *em485 = p->em485; + + if (em485) { + unsigned char lsr = serial_in(p, UART_LSR); + p->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; + + /* + * To provide required timeing and allow FIFO transfer, + * __stop_tx_rs485() must be called only when both FIFO and + * shift register are empty. It is for device driver to enable + * interrupt on TEMT. + */ + if ((lsr & BOTH_EMPTY) != BOTH_EMPTY) + return; + + __stop_tx_rs485(p); + } + __do_stop_tx(p); +} + +static void serial8250_stop_tx(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + + serial8250_rpm_get(up); + __stop_tx(up); + + /* + * We really want to stop the transmitter from sending. + */ + if (port->type == PORT_16C950) { + up->acr |= UART_ACR_TXDIS; + serial_icr_write(up, UART_ACR, up->acr); + } + serial8250_rpm_put(up); +} + +static inline void __start_tx(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + + if (up->dma && !up->dma->tx_dma(up)) + return; + + if (serial8250_set_THRI(up)) { + if (up->bugs & UART_BUG_TXEN) { + unsigned char lsr; + + lsr = serial_in(up, UART_LSR); + up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; + if (lsr & UART_LSR_THRE) + serial8250_tx_chars(up); + } + } + + /* + * Re-enable the transmitter if we disabled it. + */ + if (port->type == PORT_16C950 && up->acr & UART_ACR_TXDIS) { + up->acr &= ~UART_ACR_TXDIS; + serial_icr_write(up, UART_ACR, up->acr); + } +} + +/** + * serial8250_em485_start_tx() - generic ->rs485_start_tx() callback + * @up: uart 8250 port + * + * Generic callback usable by 8250 uart drivers to start rs485 transmission. + * Assumes that setting the RTS bit in the MCR register means RTS is high. + * (Some chips use inverse semantics.) Further assumes that reception is + * stoppable by disabling the UART_IER_RDI interrupt. (Some chips set the + * UART_LSR_DR bit even when UART_IER_RDI is disabled, foiling this approach.) + */ +void serial8250_em485_start_tx(struct uart_8250_port *up) +{ + unsigned char mcr = serial8250_in_MCR(up); + + if (!(up->port.rs485.flags & SER_RS485_RX_DURING_TX)) + serial8250_stop_rx(&up->port); + + if (up->port.rs485.flags & SER_RS485_RTS_ON_SEND) + mcr |= UART_MCR_RTS; + else + mcr &= ~UART_MCR_RTS; + serial8250_out_MCR(up, mcr); +} +EXPORT_SYMBOL_GPL(serial8250_em485_start_tx); + +static inline void start_tx_rs485(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + struct uart_8250_em485 *em485 = up->em485; + + /* + * While serial8250_em485_handle_stop_tx() is a noop if + * em485->active_timer != &em485->stop_tx_timer, it might happen that + * the timer is still armed and triggers only after the current bunch of + * chars is send and em485->active_timer == &em485->stop_tx_timer again. + * So cancel the timer. There is still a theoretical race condition if + * the timer is already running and only comes around to check for + * em485->active_timer when &em485->stop_tx_timer is armed again. + */ + if (em485->active_timer == &em485->stop_tx_timer) + hrtimer_try_to_cancel(&em485->stop_tx_timer); + + em485->active_timer = NULL; + + if (em485->tx_stopped) { + em485->tx_stopped = false; + + up->rs485_start_tx(up); + + if (up->port.rs485.delay_rts_before_send > 0) { + em485->active_timer = &em485->start_tx_timer; + start_hrtimer_ms(&em485->start_tx_timer, + up->port.rs485.delay_rts_before_send); + return; + } + } + + __start_tx(port); +} + +static enum hrtimer_restart serial8250_em485_handle_start_tx(struct hrtimer *t) +{ + struct uart_8250_em485 *em485; + struct uart_8250_port *p; + unsigned long flags; + + em485 = container_of(t, struct uart_8250_em485, start_tx_timer); + p = em485->port; + + spin_lock_irqsave(&p->port.lock, flags); + if (em485->active_timer == &em485->start_tx_timer) { + __start_tx(&p->port); + em485->active_timer = NULL; + } + spin_unlock_irqrestore(&p->port.lock, flags); + return HRTIMER_NORESTART; +} + +static void serial8250_start_tx(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + struct uart_8250_em485 *em485 = up->em485; + + serial8250_rpm_get_tx(up); + + if (em485 && + em485->active_timer == &em485->start_tx_timer) + return; + + if (em485) + start_tx_rs485(port); + else + __start_tx(port); +} + +static void serial8250_throttle(struct uart_port *port) +{ + port->throttle(port); +} + +static void serial8250_unthrottle(struct uart_port *port) +{ + port->unthrottle(port); +} + +static void serial8250_disable_ms(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + + /* no MSR capabilities */ + if (up->bugs & UART_BUG_NOMSR) + return; + + mctrl_gpio_disable_ms(up->gpios); + + up->ier &= ~UART_IER_MSI; + serial_port_out(port, UART_IER, up->ier); +} + +static void serial8250_enable_ms(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + + /* no MSR capabilities */ + if (up->bugs & UART_BUG_NOMSR) + return; + + mctrl_gpio_enable_ms(up->gpios); + + up->ier |= UART_IER_MSI; + + serial8250_rpm_get(up); + serial_port_out(port, UART_IER, up->ier); + serial8250_rpm_put(up); +} + +void serial8250_read_char(struct uart_8250_port *up, unsigned char lsr) +{ + struct uart_port *port = &up->port; + unsigned char ch; + char flag = TTY_NORMAL; + + if (likely(lsr & UART_LSR_DR)) + ch = serial_in(up, UART_RX); + else + /* + * Intel 82571 has a Serial Over Lan device that will + * set UART_LSR_BI without setting UART_LSR_DR when + * it receives a break. To avoid reading from the + * receive buffer without UART_LSR_DR bit set, we + * just force the read character to be 0 + */ + ch = 0; + + port->icount.rx++; + + lsr |= up->lsr_saved_flags; + up->lsr_saved_flags = 0; + + if (unlikely(lsr & UART_LSR_BRK_ERROR_BITS)) { + if (lsr & UART_LSR_BI) { + lsr &= ~(UART_LSR_FE | UART_LSR_PE); + port->icount.brk++; + /* + * We do the SysRQ and SAK checking + * here because otherwise the break + * may get masked by ignore_status_mask + * or read_status_mask. + */ + if (uart_handle_break(port)) + return; + } else if (lsr & UART_LSR_PE) + port->icount.parity++; + else if (lsr & UART_LSR_FE) + port->icount.frame++; + if (lsr & UART_LSR_OE) + port->icount.overrun++; + + /* + * Mask off conditions which should be ignored. + */ + lsr &= port->read_status_mask; + + if (lsr & UART_LSR_BI) { + dev_dbg(port->dev, "handling break\n"); + flag = TTY_BREAK; + } else if (lsr & UART_LSR_PE) + flag = TTY_PARITY; + else if (lsr & UART_LSR_FE) + flag = TTY_FRAME; + } + if (uart_prepare_sysrq_char(port, ch)) + return; + + uart_insert_char(port, lsr, UART_LSR_OE, ch, flag); +} +EXPORT_SYMBOL_GPL(serial8250_read_char); + +/* + * serial8250_rx_chars: processes according to the passed in LSR + * value, and returns the remaining LSR bits not handled + * by this Rx routine. + */ +unsigned char serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr) +{ + struct uart_port *port = &up->port; + int max_count = 256; + + do { + serial8250_read_char(up, lsr); + if (--max_count == 0) + break; + lsr = serial_in(up, UART_LSR); + } while (lsr & (UART_LSR_DR | UART_LSR_BI)); + + tty_flip_buffer_push(&port->state->port); + return lsr; +} +EXPORT_SYMBOL_GPL(serial8250_rx_chars); + +void serial8250_tx_chars(struct uart_8250_port *up) +{ + struct uart_port *port = &up->port; + struct circ_buf *xmit = &port->state->xmit; + int count; + + if (port->x_char) { + uart_xchar_out(port, UART_TX); + return; + } + if (uart_tx_stopped(port)) { + serial8250_stop_tx(port); + return; + } + if (uart_circ_empty(xmit)) { + __stop_tx(up); + return; + } + + count = up->tx_loadsz; + do { + serial_out(up, UART_TX, xmit->buf[xmit->tail]); + if (up->bugs & UART_BUG_TXRACE) { + /* + * The Aspeed BMC virtual UARTs have a bug where data + * may get stuck in the BMC's Tx FIFO from bursts of + * writes on the APB interface. + * + * Delay back-to-back writes by a read cycle to avoid + * stalling the VUART. Read a register that won't have + * side-effects and discard the result. + */ + serial_in(up, UART_SCR); + } + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + if ((up->capabilities & UART_CAP_HFIFO) && + (serial_in(up, UART_LSR) & BOTH_EMPTY) != BOTH_EMPTY) + break; + /* The BCM2835 MINI UART THRE bit is really a not-full bit. */ + if ((up->capabilities & UART_CAP_MINI) && + !(serial_in(up, UART_LSR) & UART_LSR_THRE)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + /* + * With RPM enabled, we have to wait until the FIFO is empty before the + * HW can go idle. So we get here once again with empty FIFO and disable + * the interrupt and RPM in __stop_tx() + */ + if (uart_circ_empty(xmit) && !(up->capabilities & UART_CAP_RPM)) + __stop_tx(up); +} +EXPORT_SYMBOL_GPL(serial8250_tx_chars); + +/* Caller holds uart port lock */ +unsigned int serial8250_modem_status(struct uart_8250_port *up) +{ + struct uart_port *port = &up->port; + unsigned int status = serial_in(up, UART_MSR); + + status |= up->msr_saved_flags; + up->msr_saved_flags = 0; + if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI && + port->state != NULL) { + if (status & UART_MSR_TERI) + port->icount.rng++; + if (status & UART_MSR_DDSR) + port->icount.dsr++; + if (status & UART_MSR_DDCD) + uart_handle_dcd_change(port, status & UART_MSR_DCD); + if (status & UART_MSR_DCTS) + uart_handle_cts_change(port, status & UART_MSR_CTS); + + wake_up_interruptible(&port->state->port.delta_msr_wait); + } + + return status; +} +EXPORT_SYMBOL_GPL(serial8250_modem_status); + +static bool handle_rx_dma(struct uart_8250_port *up, unsigned int iir) +{ + switch (iir & 0x3f) { + case UART_IIR_RDI: + if (!up->dma->rx_running) + break; + fallthrough; + case UART_IIR_RLSI: + case UART_IIR_RX_TIMEOUT: + serial8250_rx_dma_flush(up); + return true; + } + return up->dma->rx_dma(up); +} + +/* + * This handles the interrupt from one port. + */ +int serial8250_handle_irq(struct uart_port *port, unsigned int iir) +{ + unsigned char status; + unsigned long flags; + struct uart_8250_port *up = up_to_u8250p(port); + struct tty_port *tport = &port->state->port; + bool skip_rx = false; + + if (iir & UART_IIR_NO_INT) + return 0; + + spin_lock_irqsave(&port->lock, flags); + + status = serial_port_in(port, UART_LSR); + + /* + * If port is stopped and there are no error conditions in the + * FIFO, then don't drain the FIFO, as this may lead to TTY buffer + * overflow. Not servicing, RX FIFO would trigger auto HW flow + * control when FIFO occupancy reaches preset threshold, thus + * halting RX. This only works when auto HW flow control is + * available. + */ + if (!(status & (UART_LSR_FIFOE | UART_LSR_BRK_ERROR_BITS)) && + (port->status & (UPSTAT_AUTOCTS | UPSTAT_AUTORTS)) && + !(port->read_status_mask & UART_LSR_DR)) + skip_rx = true; + + if (status & (UART_LSR_DR | UART_LSR_BI) && !skip_rx) { + struct irq_data *d; + + d = irq_get_irq_data(port->irq); + if (d && irqd_is_wakeup_set(d)) + pm_wakeup_event(tport->tty->dev, 0); + if (!up->dma || handle_rx_dma(up, iir)) + status = serial8250_rx_chars(up, status); + } + serial8250_modem_status(up); + if ((!up->dma || up->dma->tx_err) && (status & UART_LSR_THRE) && + (up->ier & UART_IER_THRI)) + serial8250_tx_chars(up); + + uart_unlock_and_check_sysrq(port, flags); + return 1; +} +EXPORT_SYMBOL_GPL(serial8250_handle_irq); + +static int serial8250_default_handle_irq(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + unsigned int iir; + int ret; + + serial8250_rpm_get(up); + + iir = serial_port_in(port, UART_IIR); + ret = serial8250_handle_irq(port, iir); + + serial8250_rpm_put(up); + return ret; +} + +/* + * Newer 16550 compatible parts such as the SC16C650 & Altera 16550 Soft IP + * have a programmable TX threshold that triggers the THRE interrupt in + * the IIR register. In this case, the THRE interrupt indicates the FIFO + * has space available. Load it up with tx_loadsz bytes. + */ +static int serial8250_tx_threshold_handle_irq(struct uart_port *port) +{ + unsigned long flags; + unsigned int iir = serial_port_in(port, UART_IIR); + + /* TX Threshold IRQ triggered so load up FIFO */ + if ((iir & UART_IIR_ID) == UART_IIR_THRI) { + struct uart_8250_port *up = up_to_u8250p(port); + + spin_lock_irqsave(&port->lock, flags); + serial8250_tx_chars(up); + spin_unlock_irqrestore(&port->lock, flags); + } + + iir = serial_port_in(port, UART_IIR); + return serial8250_handle_irq(port, iir); +} + +static unsigned int serial8250_tx_empty(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + unsigned int result = 0; + unsigned long flags; + unsigned int lsr; + + serial8250_rpm_get(up); + + spin_lock_irqsave(&port->lock, flags); + if (!serial8250_tx_dma_running(up)) { + lsr = serial_port_in(port, UART_LSR); + up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; + + if ((lsr & BOTH_EMPTY) == BOTH_EMPTY) + result = TIOCSER_TEMT; + } + spin_unlock_irqrestore(&port->lock, flags); + + serial8250_rpm_put(up); + + return result; +} + +unsigned int serial8250_do_get_mctrl(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + unsigned int status; + unsigned int val; + + serial8250_rpm_get(up); + status = serial8250_modem_status(up); + serial8250_rpm_put(up); + + val = serial8250_MSR_to_TIOCM(status); + if (up->gpios) + return mctrl_gpio_get(up->gpios, &val); + + return val; +} +EXPORT_SYMBOL_GPL(serial8250_do_get_mctrl); + +static unsigned int serial8250_get_mctrl(struct uart_port *port) +{ + if (port->get_mctrl) + return port->get_mctrl(port); + return serial8250_do_get_mctrl(port); +} + +void serial8250_do_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_8250_port *up = up_to_u8250p(port); + unsigned char mcr; + + mcr = serial8250_TIOCM_to_MCR(mctrl); + + mcr = (mcr & up->mcr_mask) | up->mcr_force | up->mcr; + + serial8250_out_MCR(up, mcr); +} +EXPORT_SYMBOL_GPL(serial8250_do_set_mctrl); + +static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + if (port->rs485.flags & SER_RS485_ENABLED) + return; + + if (port->set_mctrl) + port->set_mctrl(port, mctrl); + else + serial8250_do_set_mctrl(port, mctrl); +} + +static void serial8250_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_8250_port *up = up_to_u8250p(port); + unsigned long flags; + + serial8250_rpm_get(up); + spin_lock_irqsave(&port->lock, flags); + if (break_state == -1) + up->lcr |= UART_LCR_SBC; + else + up->lcr &= ~UART_LCR_SBC; + serial_port_out(port, UART_LCR, up->lcr); + spin_unlock_irqrestore(&port->lock, flags); + serial8250_rpm_put(up); +} + +/* + * Wait for transmitter & holding register to empty + */ +static void wait_for_xmitr(struct uart_8250_port *up, int bits) +{ + unsigned int status, tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + for (;;) { + status = serial_in(up, UART_LSR); + + up->lsr_saved_flags |= status & LSR_SAVE_FLAGS; + + if ((status & bits) == bits) + break; + if (--tmout == 0) + break; + udelay(1); + touch_nmi_watchdog(); + } + + /* Wait up to 1s for flow control if necessary */ + if (up->port.flags & UPF_CONS_FLOW) { + for (tmout = 1000000; tmout; tmout--) { + unsigned int msr = serial_in(up, UART_MSR); + up->msr_saved_flags |= msr & MSR_SAVE_FLAGS; + if (msr & UART_MSR_CTS) + break; + udelay(1); + touch_nmi_watchdog(); + } + } +} + +#ifdef CONFIG_CONSOLE_POLL +/* + * Console polling routines for writing and reading from the uart while + * in an interrupt or debug context. + */ + +static int serial8250_get_poll_char(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + unsigned char lsr; + int status; + + serial8250_rpm_get(up); + + lsr = serial_port_in(port, UART_LSR); + + if (!(lsr & UART_LSR_DR)) { + status = NO_POLL_CHAR; + goto out; + } + + status = serial_port_in(port, UART_RX); +out: + serial8250_rpm_put(up); + return status; +} + + +static void serial8250_put_poll_char(struct uart_port *port, + unsigned char c) +{ + unsigned int ier; + struct uart_8250_port *up = up_to_u8250p(port); + + serial8250_rpm_get(up); + /* + * First save the IER then disable the interrupts + */ + ier = serial_port_in(port, UART_IER); + if (up->capabilities & UART_CAP_UUE) + serial_port_out(port, UART_IER, UART_IER_UUE); + else + serial_port_out(port, UART_IER, 0); + + wait_for_xmitr(up, BOTH_EMPTY); + /* + * Send the character out. + */ + serial_port_out(port, UART_TX, c); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up, BOTH_EMPTY); + serial_port_out(port, UART_IER, ier); + serial8250_rpm_put(up); +} + +#endif /* CONFIG_CONSOLE_POLL */ + +int serial8250_do_startup(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + unsigned long flags; + unsigned char lsr, iir; + int retval; + + if (!port->fifosize) + port->fifosize = uart_config[port->type].fifo_size; + if (!up->tx_loadsz) + up->tx_loadsz = uart_config[port->type].tx_loadsz; + if (!up->capabilities) + up->capabilities = uart_config[port->type].flags; + up->mcr = 0; + + if (port->iotype != up->cur_iotype) + set_io_from_upio(port); + + serial8250_rpm_get(up); + if (port->type == PORT_16C950) { + /* Wake up and initialize UART */ + up->acr = 0; + serial_port_out(port, UART_LCR, UART_LCR_CONF_MODE_B); + serial_port_out(port, UART_EFR, UART_EFR_ECB); + serial_port_out(port, UART_IER, 0); + serial_port_out(port, UART_LCR, 0); + serial_icr_write(up, UART_CSR, 0); /* Reset the UART */ + serial_port_out(port, UART_LCR, UART_LCR_CONF_MODE_B); + serial_port_out(port, UART_EFR, UART_EFR_ECB); + serial_port_out(port, UART_LCR, 0); + } + + if (port->type == PORT_DA830) { + /* Reset the port */ + serial_port_out(port, UART_IER, 0); + serial_port_out(port, UART_DA830_PWREMU_MGMT, 0); + mdelay(10); + + /* Enable Tx, Rx and free run mode */ + serial_port_out(port, UART_DA830_PWREMU_MGMT, + UART_DA830_PWREMU_MGMT_UTRST | + UART_DA830_PWREMU_MGMT_URRST | + UART_DA830_PWREMU_MGMT_FREE); + } + + if (port->type == PORT_NPCM) { + /* + * Nuvoton calls the scratch register 'UART_TOR' (timeout + * register). Enable it, and set TIOC (timeout interrupt + * comparator) to be 0x20 for correct operation. + */ + serial_port_out(port, UART_NPCM_TOR, UART_NPCM_TOIE | 0x20); + } + +#ifdef CONFIG_SERIAL_8250_RSA + /* + * If this is an RSA port, see if we can kick it up to the + * higher speed clock. + */ + enable_rsa(up); +#endif + + /* + * Clear the FIFO buffers and disable them. + * (they will be reenabled in set_termios()) + */ + serial8250_clear_fifos(up); + + /* + * Clear the interrupt registers. + */ + serial_port_in(port, UART_LSR); + serial_port_in(port, UART_RX); + serial_port_in(port, UART_IIR); + serial_port_in(port, UART_MSR); + + /* + * At this point, there's no way the LSR could still be 0xff; + * if it is, then bail out, because there's likely no UART + * here. + */ + if (!(port->flags & UPF_BUGGY_UART) && + (serial_port_in(port, UART_LSR) == 0xff)) { + dev_info_ratelimited(port->dev, "LSR safety check engaged!\n"); + retval = -ENODEV; + goto out; + } + + /* + * For a XR16C850, we need to set the trigger levels + */ + if (port->type == PORT_16850) { + unsigned char fctr; + + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + + fctr = serial_in(up, UART_FCTR) & ~(UART_FCTR_RX|UART_FCTR_TX); + serial_port_out(port, UART_FCTR, + fctr | UART_FCTR_TRGD | UART_FCTR_RX); + serial_port_out(port, UART_TRG, UART_TRG_96); + serial_port_out(port, UART_FCTR, + fctr | UART_FCTR_TRGD | UART_FCTR_TX); + serial_port_out(port, UART_TRG, UART_TRG_96); + + serial_port_out(port, UART_LCR, 0); + } + + /* + * For the Altera 16550 variants, set TX threshold trigger level. + */ + if (((port->type == PORT_ALTR_16550_F32) || + (port->type == PORT_ALTR_16550_F64) || + (port->type == PORT_ALTR_16550_F128)) && (port->fifosize > 1)) { + /* Bounds checking of TX threshold (valid 0 to fifosize-2) */ + if ((up->tx_loadsz < 2) || (up->tx_loadsz > port->fifosize)) { + dev_err(port->dev, "TX FIFO Threshold errors, skipping\n"); + } else { + serial_port_out(port, UART_ALTR_AFR, + UART_ALTR_EN_TXFIFO_LW); + serial_port_out(port, UART_ALTR_TX_LOW, + port->fifosize - up->tx_loadsz); + port->handle_irq = serial8250_tx_threshold_handle_irq; + } + } + + /* Check if we need to have shared IRQs */ + if (port->irq && (up->port.flags & UPF_SHARE_IRQ)) + up->port.irqflags |= IRQF_SHARED; + + retval = up->ops->setup_irq(up); + if (retval) + goto out; + + if (port->irq && !(up->port.flags & UPF_NO_THRE_TEST)) { + unsigned char iir1; + + if (port->irqflags & IRQF_SHARED) + disable_irq_nosync(port->irq); + + /* + * Test for UARTs that do not reassert THRE when the + * transmitter is idle and the interrupt has already + * been cleared. Real 16550s should always reassert + * this interrupt whenever the transmitter is idle and + * the interrupt is enabled. Delays are necessary to + * allow register changes to become visible. + */ + spin_lock_irqsave(&port->lock, flags); + + wait_for_xmitr(up, UART_LSR_THRE); + serial_port_out_sync(port, UART_IER, UART_IER_THRI); + udelay(1); /* allow THRE to set */ + iir1 = serial_port_in(port, UART_IIR); + serial_port_out(port, UART_IER, 0); + serial_port_out_sync(port, UART_IER, UART_IER_THRI); + udelay(1); /* allow a working UART time to re-assert THRE */ + iir = serial_port_in(port, UART_IIR); + serial_port_out(port, UART_IER, 0); + + spin_unlock_irqrestore(&port->lock, flags); + + if (port->irqflags & IRQF_SHARED) + enable_irq(port->irq); + + /* + * If the interrupt is not reasserted, or we otherwise + * don't trust the iir, setup a timer to kick the UART + * on a regular basis. + */ + if ((!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) || + up->port.flags & UPF_BUG_THRE) { + up->bugs |= UART_BUG_THRE; + } + } + + up->ops->setup_timer(up); + + /* + * Now, initialize the UART + */ + serial_port_out(port, UART_LCR, UART_LCR_WLEN8); + + spin_lock_irqsave(&port->lock, flags); + if (up->port.flags & UPF_FOURPORT) { + if (!up->port.irq) + up->port.mctrl |= TIOCM_OUT1; + } else + /* + * Most PC uarts need OUT2 raised to enable interrupts. + */ + if (port->irq) + up->port.mctrl |= TIOCM_OUT2; + + serial8250_set_mctrl(port, port->mctrl); + + /* + * Serial over Lan (SoL) hack: + * Intel 8257x Gigabit ethernet chips have a 16550 emulation, to be + * used for Serial Over Lan. Those chips take a longer time than a + * normal serial device to signalize that a transmission data was + * queued. Due to that, the above test generally fails. One solution + * would be to delay the reading of iir. However, this is not + * reliable, since the timeout is variable. So, let's just don't + * test if we receive TX irq. This way, we'll never enable + * UART_BUG_TXEN. + */ + if (up->port.quirks & UPQ_NO_TXEN_TEST) + goto dont_test_tx_en; + + /* + * Do a quick test to see if we receive an interrupt when we enable + * the TX irq. + */ + serial_port_out(port, UART_IER, UART_IER_THRI); + lsr = serial_port_in(port, UART_LSR); + iir = serial_port_in(port, UART_IIR); + serial_port_out(port, UART_IER, 0); + + if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT) { + if (!(up->bugs & UART_BUG_TXEN)) { + up->bugs |= UART_BUG_TXEN; + dev_dbg(port->dev, "enabling bad tx status workarounds\n"); + } + } else { + up->bugs &= ~UART_BUG_TXEN; + } + +dont_test_tx_en: + spin_unlock_irqrestore(&port->lock, flags); + + /* + * Clear the interrupt registers again for luck, and clear the + * saved flags to avoid getting false values from polling + * routines or the previous session. + */ + serial_port_in(port, UART_LSR); + serial_port_in(port, UART_RX); + serial_port_in(port, UART_IIR); + serial_port_in(port, UART_MSR); + up->lsr_saved_flags = 0; + up->msr_saved_flags = 0; + + /* + * Request DMA channels for both RX and TX. + */ + if (up->dma) { + const char *msg = NULL; + + if (uart_console(port)) + msg = "forbid DMA for kernel console"; + else if (serial8250_request_dma(up)) + msg = "failed to request DMA"; + if (msg) { + dev_warn_ratelimited(port->dev, "%s\n", msg); + up->dma = NULL; + } + } + + /* + * Set the IER shadow for rx interrupts but defer actual interrupt + * enable until after the FIFOs are enabled; otherwise, an already- + * active sender can swamp the interrupt handler with "too much work". + */ + up->ier = UART_IER_RLSI | UART_IER_RDI; + + if (port->flags & UPF_FOURPORT) { + unsigned int icp; + /* + * Enable interrupts on the AST Fourport board + */ + icp = (port->iobase & 0xfe0) | 0x01f; + outb_p(0x80, icp); + inb_p(icp); + } + retval = 0; +out: + serial8250_rpm_put(up); + return retval; +} +EXPORT_SYMBOL_GPL(serial8250_do_startup); + +static int serial8250_startup(struct uart_port *port) +{ + if (port->startup) + return port->startup(port); + return serial8250_do_startup(port); +} + +void serial8250_do_shutdown(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + unsigned long flags; + + serial8250_rpm_get(up); + /* + * Disable interrupts from this port + */ + spin_lock_irqsave(&port->lock, flags); + up->ier = 0; + serial_port_out(port, UART_IER, 0); + spin_unlock_irqrestore(&port->lock, flags); + + synchronize_irq(port->irq); + + if (up->dma) + serial8250_release_dma(up); + + spin_lock_irqsave(&port->lock, flags); + if (port->flags & UPF_FOURPORT) { + /* reset interrupts on the AST Fourport board */ + inb((port->iobase & 0xfe0) | 0x1f); + port->mctrl |= TIOCM_OUT1; + } else + port->mctrl &= ~TIOCM_OUT2; + + serial8250_set_mctrl(port, port->mctrl); + spin_unlock_irqrestore(&port->lock, flags); + + /* + * Disable break condition and FIFOs + */ + serial_port_out(port, UART_LCR, + serial_port_in(port, UART_LCR) & ~UART_LCR_SBC); + serial8250_clear_fifos(up); + +#ifdef CONFIG_SERIAL_8250_RSA + /* + * Reset the RSA board back to 115kbps compat mode. + */ + disable_rsa(up); +#endif + + /* + * Read data port to reset things, and then unlink from + * the IRQ chain. + */ + serial_port_in(port, UART_RX); + serial8250_rpm_put(up); + + up->ops->release_irq(up); +} +EXPORT_SYMBOL_GPL(serial8250_do_shutdown); + +static void serial8250_shutdown(struct uart_port *port) +{ + if (port->shutdown) + port->shutdown(port); + else + serial8250_do_shutdown(port); +} + +/* Nuvoton NPCM UARTs have a custom divisor calculation */ +static unsigned int npcm_get_divisor(struct uart_8250_port *up, + unsigned int baud) +{ + struct uart_port *port = &up->port; + + return DIV_ROUND_CLOSEST(port->uartclk, 16 * baud + 2) - 2; +} + +static unsigned int serial8250_do_get_divisor(struct uart_port *port, + unsigned int baud, + unsigned int *frac) +{ + struct uart_8250_port *up = up_to_u8250p(port); + unsigned int quot; + + /* + * Handle magic divisors for baud rates above baud_base on + * SMSC SuperIO chips. + * + */ + if ((port->flags & UPF_MAGIC_MULTIPLIER) && + baud == (port->uartclk/4)) + quot = 0x8001; + else if ((port->flags & UPF_MAGIC_MULTIPLIER) && + baud == (port->uartclk/8)) + quot = 0x8002; + else if (up->port.type == PORT_NPCM) + quot = npcm_get_divisor(up, baud); + else + quot = uart_get_divisor(port, baud); + + /* + * Oxford Semi 952 rev B workaround + */ + if (up->bugs & UART_BUG_QUOT && (quot & 0xff) == 0) + quot++; + + return quot; +} + +static unsigned int serial8250_get_divisor(struct uart_port *port, + unsigned int baud, + unsigned int *frac) +{ + if (port->get_divisor) + return port->get_divisor(port, baud, frac); + + return serial8250_do_get_divisor(port, baud, frac); +} + +static unsigned char serial8250_compute_lcr(struct uart_8250_port *up, + tcflag_t c_cflag) +{ + unsigned char cval; + + switch (c_cflag & CSIZE) { + case CS5: + cval = UART_LCR_WLEN5; + break; + case CS6: + cval = UART_LCR_WLEN6; + break; + case CS7: + cval = UART_LCR_WLEN7; + break; + default: + case CS8: + cval = UART_LCR_WLEN8; + break; + } + + if (c_cflag & CSTOPB) + cval |= UART_LCR_STOP; + if (c_cflag & PARENB) + cval |= UART_LCR_PARITY; + if (!(c_cflag & PARODD)) + cval |= UART_LCR_EPAR; +#ifdef CMSPAR + if (c_cflag & CMSPAR) + cval |= UART_LCR_SPAR; +#endif + + return cval; +} + +void serial8250_do_set_divisor(struct uart_port *port, unsigned int baud, + unsigned int quot, unsigned int quot_frac) +{ + struct uart_8250_port *up = up_to_u8250p(port); + + /* Workaround to enable 115200 baud on OMAP1510 internal ports */ + if (is_omap1510_8250(up)) { + if (baud == 115200) { + quot = 1; + serial_port_out(port, UART_OMAP_OSC_12M_SEL, 1); + } else + serial_port_out(port, UART_OMAP_OSC_12M_SEL, 0); + } + + /* + * For NatSemi, switch to bank 2 not bank 1, to avoid resetting EXCR2, + * otherwise just set DLAB + */ + if (up->capabilities & UART_NATSEMI) + serial_port_out(port, UART_LCR, 0xe0); + else + serial_port_out(port, UART_LCR, up->lcr | UART_LCR_DLAB); + + serial_dl_write(up, quot); +} +EXPORT_SYMBOL_GPL(serial8250_do_set_divisor); + +static void serial8250_set_divisor(struct uart_port *port, unsigned int baud, + unsigned int quot, unsigned int quot_frac) +{ + if (port->set_divisor) + port->set_divisor(port, baud, quot, quot_frac); + else + serial8250_do_set_divisor(port, baud, quot, quot_frac); +} + +static unsigned int serial8250_get_baud_rate(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + unsigned int tolerance = port->uartclk / 100; + unsigned int min; + unsigned int max; + + /* + * Handle magic divisors for baud rates above baud_base on SMSC + * Super I/O chips. Enable custom rates of clk/4 and clk/8, but + * disable divisor values beyond 32767, which are unavailable. + */ + if (port->flags & UPF_MAGIC_MULTIPLIER) { + min = port->uartclk / 16 / UART_DIV_MAX >> 1; + max = (port->uartclk + tolerance) / 4; + } else { + min = port->uartclk / 16 / UART_DIV_MAX; + max = (port->uartclk + tolerance) / 16; + } + + /* + * Ask the core to calculate the divisor for us. + * Allow 1% tolerance at the upper limit so uart clks marginally + * slower than nominal still match standard baud rates without + * causing transmission errors. + */ + return uart_get_baud_rate(port, termios, old, min, max); +} + +/* + * Note in order to avoid the tty port mutex deadlock don't use the next method + * within the uart port callbacks. Primarily it's supposed to be utilized to + * handle a sudden reference clock rate change. + */ +void serial8250_update_uartclk(struct uart_port *port, unsigned int uartclk) +{ + struct uart_8250_port *up = up_to_u8250p(port); + struct tty_port *tport = &port->state->port; + unsigned int baud, quot, frac = 0; + struct ktermios *termios; + struct tty_struct *tty; + unsigned long flags; + + tty = tty_port_tty_get(tport); + if (!tty) { + mutex_lock(&tport->mutex); + port->uartclk = uartclk; + mutex_unlock(&tport->mutex); + return; + } + + down_write(&tty->termios_rwsem); + mutex_lock(&tport->mutex); + + if (port->uartclk == uartclk) + goto out_lock; + + port->uartclk = uartclk; + + if (!tty_port_initialized(tport)) + goto out_lock; + + termios = &tty->termios; + + baud = serial8250_get_baud_rate(port, termios, NULL); + quot = serial8250_get_divisor(port, baud, &frac); + + serial8250_rpm_get(up); + spin_lock_irqsave(&port->lock, flags); + + uart_update_timeout(port, termios->c_cflag, baud); + + serial8250_set_divisor(port, baud, quot, frac); + serial_port_out(port, UART_LCR, up->lcr); + + spin_unlock_irqrestore(&port->lock, flags); + serial8250_rpm_put(up); + +out_lock: + mutex_unlock(&tport->mutex); + up_write(&tty->termios_rwsem); + tty_kref_put(tty); +} +EXPORT_SYMBOL_GPL(serial8250_update_uartclk); + +void +serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_8250_port *up = up_to_u8250p(port); + unsigned char cval; + unsigned long flags; + unsigned int baud, quot, frac = 0; + + if (up->capabilities & UART_CAP_MINI) { + termios->c_cflag &= ~(CSTOPB | PARENB | PARODD | CMSPAR); + if ((termios->c_cflag & CSIZE) == CS5 || + (termios->c_cflag & CSIZE) == CS6) + termios->c_cflag = (termios->c_cflag & ~CSIZE) | CS7; + } + cval = serial8250_compute_lcr(up, termios->c_cflag); + + baud = serial8250_get_baud_rate(port, termios, old); + quot = serial8250_get_divisor(port, baud, &frac); + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + serial8250_rpm_get(up); + spin_lock_irqsave(&port->lock, flags); + + up->lcr = cval; /* Save computed LCR */ + + if (up->capabilities & UART_CAP_FIFO && port->fifosize > 1) { + if (baud < 2400 && !up->dma) { + up->fcr &= ~UART_FCR_TRIGGER_MASK; + up->fcr |= UART_FCR_TRIGGER_1; + } + } + + /* + * MCR-based auto flow control. When AFE is enabled, RTS will be + * deasserted when the receive FIFO contains more characters than + * the trigger, or the MCR RTS bit is cleared. + */ + if (up->capabilities & UART_CAP_AFE) { + up->mcr &= ~UART_MCR_AFE; + if (termios->c_cflag & CRTSCTS) + up->mcr |= UART_MCR_AFE; + } + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + port->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + if (termios->c_iflag & INPCK) + port->read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) + port->read_status_mask |= UART_LSR_BI; + + /* + * Characteres to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= UART_LSR_BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= UART_LSR_OE; + } + + /* + * ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + port->ignore_status_mask |= UART_LSR_DR; + + /* + * CTS flow control flag and modem status interrupts + */ + up->ier &= ~UART_IER_MSI; + if (!(up->bugs & UART_BUG_NOMSR) && + UART_ENABLE_MS(&up->port, termios->c_cflag)) + up->ier |= UART_IER_MSI; + if (up->capabilities & UART_CAP_UUE) + up->ier |= UART_IER_UUE; + if (up->capabilities & UART_CAP_RTOIE) + up->ier |= UART_IER_RTOIE; + + serial_port_out(port, UART_IER, up->ier); + + if (up->capabilities & UART_CAP_EFR) { + unsigned char efr = 0; + /* + * TI16C752/Startech hardware flow control. FIXME: + * - TI16C752 requires control thresholds to be set. + * - UART_MCR_RTS is ineffective if auto-RTS mode is enabled. + */ + if (termios->c_cflag & CRTSCTS) + efr |= UART_EFR_CTS; + + serial_port_out(port, UART_LCR, UART_LCR_CONF_MODE_B); + if (port->flags & UPF_EXAR_EFR) + serial_port_out(port, UART_XR_EFR, efr); + else + serial_port_out(port, UART_EFR, efr); + } + + serial8250_set_divisor(port, baud, quot, frac); + + /* + * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR + * is written without DLAB set, this mode will be disabled. + */ + if (port->type == PORT_16750) + serial_port_out(port, UART_FCR, up->fcr); + + serial_port_out(port, UART_LCR, up->lcr); /* reset DLAB */ + if (port->type != PORT_16750) { + /* emulated UARTs (Lucent Venus 167x) need two steps */ + if (up->fcr & UART_FCR_ENABLE_FIFO) + serial_port_out(port, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_port_out(port, UART_FCR, up->fcr); /* set fcr */ + } + serial8250_set_mctrl(port, port->mctrl); + spin_unlock_irqrestore(&port->lock, flags); + serial8250_rpm_put(up); + + /* Don't rewrite B0 */ + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, baud, baud); +} +EXPORT_SYMBOL(serial8250_do_set_termios); + +static void +serial8250_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + if (port->set_termios) + port->set_termios(port, termios, old); + else + serial8250_do_set_termios(port, termios, old); +} + +void serial8250_do_set_ldisc(struct uart_port *port, struct ktermios *termios) +{ + if (termios->c_line == N_PPS) { + port->flags |= UPF_HARDPPS_CD; + spin_lock_irq(&port->lock); + serial8250_enable_ms(port); + spin_unlock_irq(&port->lock); + } else { + port->flags &= ~UPF_HARDPPS_CD; + if (!UART_ENABLE_MS(port, termios->c_cflag)) { + spin_lock_irq(&port->lock); + serial8250_disable_ms(port); + spin_unlock_irq(&port->lock); + } + } +} +EXPORT_SYMBOL_GPL(serial8250_do_set_ldisc); + +static void +serial8250_set_ldisc(struct uart_port *port, struct ktermios *termios) +{ + if (port->set_ldisc) + port->set_ldisc(port, termios); + else + serial8250_do_set_ldisc(port, termios); +} + +void serial8250_do_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct uart_8250_port *p = up_to_u8250p(port); + + serial8250_set_sleep(p, state != 0); +} +EXPORT_SYMBOL(serial8250_do_pm); + +static void +serial8250_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + if (port->pm) + port->pm(port, state, oldstate); + else + serial8250_do_pm(port, state, oldstate); +} + +static unsigned int serial8250_port_size(struct uart_8250_port *pt) +{ + if (pt->port.mapsize) + return pt->port.mapsize; + if (pt->port.iotype == UPIO_AU) { + if (pt->port.type == PORT_RT2880) + return 0x100; + return 0x1000; + } + if (is_omap1_8250(pt)) + return 0x16 << pt->port.regshift; + + return 8 << pt->port.regshift; +} + +/* + * Resource handling. + */ +static int serial8250_request_std_resource(struct uart_8250_port *up) +{ + unsigned int size = serial8250_port_size(up); + struct uart_port *port = &up->port; + int ret = 0; + + switch (port->iotype) { + case UPIO_AU: + case UPIO_TSI: + case UPIO_MEM32: + case UPIO_MEM32BE: + case UPIO_MEM16: + case UPIO_MEM: + if (!port->mapbase) { + ret = -EINVAL; + break; + } + + if (!request_mem_region(port->mapbase, size, "serial")) { + ret = -EBUSY; + break; + } + + if (port->flags & UPF_IOREMAP) { + port->membase = ioremap(port->mapbase, size); + if (!port->membase) { + release_mem_region(port->mapbase, size); + ret = -ENOMEM; + } + } + break; + + case UPIO_HUB6: + case UPIO_PORT: + if (!request_region(port->iobase, size, "serial")) + ret = -EBUSY; + break; + } + return ret; +} + +static void serial8250_release_std_resource(struct uart_8250_port *up) +{ + unsigned int size = serial8250_port_size(up); + struct uart_port *port = &up->port; + + switch (port->iotype) { + case UPIO_AU: + case UPIO_TSI: + case UPIO_MEM32: + case UPIO_MEM32BE: + case UPIO_MEM16: + case UPIO_MEM: + if (!port->mapbase) + break; + + if (port->flags & UPF_IOREMAP) { + iounmap(port->membase); + port->membase = NULL; + } + + release_mem_region(port->mapbase, size); + break; + + case UPIO_HUB6: + case UPIO_PORT: + release_region(port->iobase, size); + break; + } +} + +static void serial8250_release_port(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + + serial8250_release_std_resource(up); +} + +static int serial8250_request_port(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + + return serial8250_request_std_resource(up); +} + +static int fcr_get_rxtrig_bytes(struct uart_8250_port *up) +{ + const struct serial8250_config *conf_type = &uart_config[up->port.type]; + unsigned char bytes; + + bytes = conf_type->rxtrig_bytes[UART_FCR_R_TRIG_BITS(up->fcr)]; + + return bytes ? bytes : -EOPNOTSUPP; +} + +static int bytes_to_fcr_rxtrig(struct uart_8250_port *up, unsigned char bytes) +{ + const struct serial8250_config *conf_type = &uart_config[up->port.type]; + int i; + + if (!conf_type->rxtrig_bytes[UART_FCR_R_TRIG_BITS(UART_FCR_R_TRIG_00)]) + return -EOPNOTSUPP; + + for (i = 1; i < UART_FCR_R_TRIG_MAX_STATE; i++) { + if (bytes < conf_type->rxtrig_bytes[i]) + /* Use the nearest lower value */ + return (--i) << UART_FCR_R_TRIG_SHIFT; + } + + return UART_FCR_R_TRIG_11; +} + +static int do_get_rxtrig(struct tty_port *port) +{ + struct uart_state *state = container_of(port, struct uart_state, port); + struct uart_port *uport = state->uart_port; + struct uart_8250_port *up = up_to_u8250p(uport); + + if (!(up->capabilities & UART_CAP_FIFO) || uport->fifosize <= 1) + return -EINVAL; + + return fcr_get_rxtrig_bytes(up); +} + +static int do_serial8250_get_rxtrig(struct tty_port *port) +{ + int rxtrig_bytes; + + mutex_lock(&port->mutex); + rxtrig_bytes = do_get_rxtrig(port); + mutex_unlock(&port->mutex); + + return rxtrig_bytes; +} + +static ssize_t rx_trig_bytes_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct tty_port *port = dev_get_drvdata(dev); + int rxtrig_bytes; + + rxtrig_bytes = do_serial8250_get_rxtrig(port); + if (rxtrig_bytes < 0) + return rxtrig_bytes; + + return snprintf(buf, PAGE_SIZE, "%d\n", rxtrig_bytes); +} + +static int do_set_rxtrig(struct tty_port *port, unsigned char bytes) +{ + struct uart_state *state = container_of(port, struct uart_state, port); + struct uart_port *uport = state->uart_port; + struct uart_8250_port *up = up_to_u8250p(uport); + int rxtrig; + + if (!(up->capabilities & UART_CAP_FIFO) || uport->fifosize <= 1) + return -EINVAL; + + rxtrig = bytes_to_fcr_rxtrig(up, bytes); + if (rxtrig < 0) + return rxtrig; + + serial8250_clear_fifos(up); + up->fcr &= ~UART_FCR_TRIGGER_MASK; + up->fcr |= (unsigned char)rxtrig; + serial_out(up, UART_FCR, up->fcr); + return 0; +} + +static int do_serial8250_set_rxtrig(struct tty_port *port, unsigned char bytes) +{ + int ret; + + mutex_lock(&port->mutex); + ret = do_set_rxtrig(port, bytes); + mutex_unlock(&port->mutex); + + return ret; +} + +static ssize_t rx_trig_bytes_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct tty_port *port = dev_get_drvdata(dev); + unsigned char bytes; + int ret; + + if (!count) + return -EINVAL; + + ret = kstrtou8(buf, 10, &bytes); + if (ret < 0) + return ret; + + ret = do_serial8250_set_rxtrig(port, bytes); + if (ret < 0) + return ret; + + return count; +} + +static DEVICE_ATTR_RW(rx_trig_bytes); + +static struct attribute *serial8250_dev_attrs[] = { + &dev_attr_rx_trig_bytes.attr, + NULL +}; + +static struct attribute_group serial8250_dev_attr_group = { + .attrs = serial8250_dev_attrs, +}; + +static void register_dev_spec_attr_grp(struct uart_8250_port *up) +{ + const struct serial8250_config *conf_type = &uart_config[up->port.type]; + + if (conf_type->rxtrig_bytes[0]) + up->port.attr_group = &serial8250_dev_attr_group; +} + +static void serial8250_config_port(struct uart_port *port, int flags) +{ + struct uart_8250_port *up = up_to_u8250p(port); + int ret; + + /* + * Find the region that we can probe for. This in turn + * tells us whether we can probe for the type of port. + */ + ret = serial8250_request_std_resource(up); + if (ret < 0) + return; + + if (port->iotype != up->cur_iotype) + set_io_from_upio(port); + + if (flags & UART_CONFIG_TYPE) + autoconfig(up); + + /* if access method is AU, it is a 16550 with a quirk */ + if (port->type == PORT_16550A && port->iotype == UPIO_AU) + up->bugs |= UART_BUG_NOMSR; + + /* HW bugs may trigger IRQ while IIR == NO_INT */ + if (port->type == PORT_TEGRA) + up->bugs |= UART_BUG_NOMSR; + + if (port->type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ) + autoconfig_irq(up); + + if (port->type == PORT_UNKNOWN) + serial8250_release_std_resource(up); + + register_dev_spec_attr_grp(up); + up->fcr = uart_config[up->port.type].fcr; +} + +static int +serial8250_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + if (ser->irq >= nr_irqs || ser->irq < 0 || + ser->baud_base < 9600 || ser->type < PORT_UNKNOWN || + ser->type >= ARRAY_SIZE(uart_config) || ser->type == PORT_CIRRUS || + ser->type == PORT_STARTECH) + return -EINVAL; + return 0; +} + +static const char *serial8250_type(struct uart_port *port) +{ + int type = port->type; + + if (type >= ARRAY_SIZE(uart_config)) + type = 0; + return uart_config[type].name; +} + +static const struct uart_ops serial8250_pops = { + .tx_empty = serial8250_tx_empty, + .set_mctrl = serial8250_set_mctrl, + .get_mctrl = serial8250_get_mctrl, + .stop_tx = serial8250_stop_tx, + .start_tx = serial8250_start_tx, + .throttle = serial8250_throttle, + .unthrottle = serial8250_unthrottle, + .stop_rx = serial8250_stop_rx, + .enable_ms = serial8250_enable_ms, + .break_ctl = serial8250_break_ctl, + .startup = serial8250_startup, + .shutdown = serial8250_shutdown, + .set_termios = serial8250_set_termios, + .set_ldisc = serial8250_set_ldisc, + .pm = serial8250_pm, + .type = serial8250_type, + .release_port = serial8250_release_port, + .request_port = serial8250_request_port, + .config_port = serial8250_config_port, + .verify_port = serial8250_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = serial8250_get_poll_char, + .poll_put_char = serial8250_put_poll_char, +#endif +}; + +void serial8250_init_port(struct uart_8250_port *up) +{ + struct uart_port *port = &up->port; + + spin_lock_init(&port->lock); + port->pm = NULL; + port->ops = &serial8250_pops; + port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_8250_CONSOLE); + + up->cur_iotype = 0xFF; +} +EXPORT_SYMBOL_GPL(serial8250_init_port); + +void serial8250_set_defaults(struct uart_8250_port *up) +{ + struct uart_port *port = &up->port; + + if (up->port.flags & UPF_FIXED_TYPE) { + unsigned int type = up->port.type; + + if (!up->port.fifosize) + up->port.fifosize = uart_config[type].fifo_size; + if (!up->tx_loadsz) + up->tx_loadsz = uart_config[type].tx_loadsz; + if (!up->capabilities) + up->capabilities = uart_config[type].flags; + } + + set_io_from_upio(port); + + /* default dma handlers */ + if (up->dma) { + if (!up->dma->tx_dma) + up->dma->tx_dma = serial8250_tx_dma; + if (!up->dma->rx_dma) + up->dma->rx_dma = serial8250_rx_dma; + } +} +EXPORT_SYMBOL_GPL(serial8250_set_defaults); + +#ifdef CONFIG_SERIAL_8250_CONSOLE + +static void serial8250_console_putchar(struct uart_port *port, int ch) +{ + struct uart_8250_port *up = up_to_u8250p(port); + + wait_for_xmitr(up, UART_LSR_THRE); + serial_port_out(port, UART_TX, ch); +} + +/* + * Restore serial console when h/w power-off detected + */ +static void serial8250_console_restore(struct uart_8250_port *up) +{ + struct uart_port *port = &up->port; + struct ktermios termios; + unsigned int baud, quot, frac = 0; + + termios.c_cflag = port->cons->cflag; + termios.c_ispeed = port->cons->ispeed; + termios.c_ospeed = port->cons->ospeed; + if (port->state->port.tty && termios.c_cflag == 0) { + termios.c_cflag = port->state->port.tty->termios.c_cflag; + termios.c_ispeed = port->state->port.tty->termios.c_ispeed; + termios.c_ospeed = port->state->port.tty->termios.c_ospeed; + } + + baud = serial8250_get_baud_rate(port, &termios, NULL); + quot = serial8250_get_divisor(port, baud, &frac); + + serial8250_set_divisor(port, baud, quot, frac); + serial_port_out(port, UART_LCR, up->lcr); + serial8250_out_MCR(up, up->mcr | UART_MCR_DTR | UART_MCR_RTS); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console_lock must be held when we get here. + * + * Doing runtime PM is really a bad idea for the kernel console. + * Thus, we assume the function is called when device is powered up. + */ +void serial8250_console_write(struct uart_8250_port *up, const char *s, + unsigned int count) +{ + struct uart_8250_em485 *em485 = up->em485; + struct uart_port *port = &up->port; + unsigned long flags; + unsigned int ier; + int locked = 1; + + touch_nmi_watchdog(); + + if (oops_in_progress) + locked = spin_trylock_irqsave(&port->lock, flags); + else + spin_lock_irqsave(&port->lock, flags); + + /* + * First save the IER then disable the interrupts + */ + ier = serial_port_in(port, UART_IER); + + if (up->capabilities & UART_CAP_UUE) + serial_port_out(port, UART_IER, UART_IER_UUE); + else + serial_port_out(port, UART_IER, 0); + + /* check scratch reg to see if port powered off during system sleep */ + if (up->canary && (up->canary != serial_port_in(port, UART_SCR))) { + serial8250_console_restore(up); + up->canary = 0; + } + + if (em485) { + if (em485->tx_stopped) + up->rs485_start_tx(up); + mdelay(port->rs485.delay_rts_before_send); + } + + uart_console_write(port, s, count, serial8250_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up, BOTH_EMPTY); + + if (em485) { + mdelay(port->rs485.delay_rts_after_send); + if (em485->tx_stopped) + up->rs485_stop_tx(up); + } + + serial_port_out(port, UART_IER, ier); + + /* + * The receive handling will happen properly because the + * receive ready bit will still be set; it is not cleared + * on read. However, modem control will not, we must + * call it if we have saved something in the saved flags + * while processing with interrupts off. + */ + if (up->msr_saved_flags) + serial8250_modem_status(up); + + if (locked) + spin_unlock_irqrestore(&port->lock, flags); +} + +static unsigned int probe_baud(struct uart_port *port) +{ + unsigned char lcr, dll, dlm; + unsigned int quot; + + lcr = serial_port_in(port, UART_LCR); + serial_port_out(port, UART_LCR, lcr | UART_LCR_DLAB); + dll = serial_port_in(port, UART_DLL); + dlm = serial_port_in(port, UART_DLM); + serial_port_out(port, UART_LCR, lcr); + + quot = (dlm << 8) | dll; + return (port->uartclk / 16) / quot; +} + +int serial8250_console_setup(struct uart_port *port, char *options, bool probe) +{ + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + int ret; + + if (!port->iobase && !port->membase) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else if (probe) + baud = probe_baud(port); + + ret = uart_set_options(port, port->cons, baud, parity, bits, flow); + if (ret) + return ret; + + if (port->dev) + pm_runtime_get_sync(port->dev); + + return 0; +} + +int serial8250_console_exit(struct uart_port *port) +{ + if (port->dev) + pm_runtime_put_sync(port->dev); + + return 0; +} + +#endif /* CONFIG_SERIAL_8250_CONSOLE */ + +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250/8250_pxa.c b/drivers/tty/serial/8250/8250_pxa.c new file mode 100644 index 000000000..33ca98bfa --- /dev/null +++ b/drivers/tty/serial/8250/8250_pxa.c @@ -0,0 +1,191 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * drivers/tty/serial/8250/8250_pxa.c -- driver for PXA on-board UARTS + * Copyright: (C) 2013 Sergei Ianovich + * + * replaces drivers/serial/pxa.c by Nicolas Pitre + * Created: Feb 20, 2003 + * Copyright: (C) 2003 Monta Vista Software, Inc. + * + * Based on drivers/serial/8250.c by Russell King. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "8250.h" + +struct pxa8250_data { + int line; + struct clk *clk; +}; + +static int __maybe_unused serial_pxa_suspend(struct device *dev) +{ + struct pxa8250_data *data = dev_get_drvdata(dev); + + serial8250_suspend_port(data->line); + + return 0; +} + +static int __maybe_unused serial_pxa_resume(struct device *dev) +{ + struct pxa8250_data *data = dev_get_drvdata(dev); + + serial8250_resume_port(data->line); + + return 0; +} + +static const struct dev_pm_ops serial_pxa_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(serial_pxa_suspend, serial_pxa_resume) +}; + +static const struct of_device_id serial_pxa_dt_ids[] = { + { .compatible = "mrvl,pxa-uart", }, + { .compatible = "mrvl,mmp-uart", }, + {} +}; +MODULE_DEVICE_TABLE(of, serial_pxa_dt_ids); + +/* Uart divisor latch write */ +static void serial_pxa_dl_write(struct uart_8250_port *up, int value) +{ + unsigned int dll; + + serial_out(up, UART_DLL, value & 0xff); + /* + * work around Erratum #74 according to Marvel(R) PXA270M Processor + * Specification Update (April 19, 2010) + */ + dll = serial_in(up, UART_DLL); + WARN_ON(dll != (value & 0xff)); + + serial_out(up, UART_DLM, value >> 8 & 0xff); +} + + +static void serial_pxa_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct pxa8250_data *data = port->private_data; + + if (!state) + clk_prepare_enable(data->clk); + else + clk_disable_unprepare(data->clk); +} + +static int serial_pxa_probe(struct platform_device *pdev) +{ + struct uart_8250_port uart = {}; + struct pxa8250_data *data; + struct resource *mmres; + int irq, ret; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mmres) + return -ENODEV; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(data->clk)) + return PTR_ERR(data->clk); + + ret = clk_prepare(data->clk); + if (ret) + return ret; + + ret = of_alias_get_id(pdev->dev.of_node, "serial"); + if (ret >= 0) + uart.port.line = ret; + + uart.port.type = PORT_XSCALE; + uart.port.iotype = UPIO_MEM32; + uart.port.mapbase = mmres->start; + uart.port.regshift = 2; + uart.port.irq = irq; + uart.port.fifosize = 64; + uart.port.flags = UPF_IOREMAP | UPF_SKIP_TEST | UPF_FIXED_TYPE; + uart.port.dev = &pdev->dev; + uart.port.uartclk = clk_get_rate(data->clk); + uart.port.pm = serial_pxa_pm; + uart.port.private_data = data; + uart.dl_write = serial_pxa_dl_write; + + ret = serial8250_register_8250_port(&uart); + if (ret < 0) + goto err_clk; + + data->line = ret; + + platform_set_drvdata(pdev, data); + + return 0; + + err_clk: + clk_unprepare(data->clk); + return ret; +} + +static int serial_pxa_remove(struct platform_device *pdev) +{ + struct pxa8250_data *data = platform_get_drvdata(pdev); + + serial8250_unregister_port(data->line); + + clk_unprepare(data->clk); + + return 0; +} + +static struct platform_driver serial_pxa_driver = { + .probe = serial_pxa_probe, + .remove = serial_pxa_remove, + + .driver = { + .name = "pxa2xx-uart", + .pm = &serial_pxa_pm_ops, + .of_match_table = serial_pxa_dt_ids, + }, +}; + +module_platform_driver(serial_pxa_driver); + +#ifdef CONFIG_SERIAL_8250_CONSOLE +static int __init early_serial_pxa_setup(struct earlycon_device *device, + const char *options) +{ + struct uart_port *port = &device->port; + + if (!(device->port.membase || device->port.iobase)) + return -ENODEV; + + port->regshift = 2; + return early_serial8250_setup(device, NULL); +} +OF_EARLYCON_DECLARE(early_pxa, "mrvl,pxa-uart", early_serial_pxa_setup); +#endif + +MODULE_AUTHOR("Sergei Ianovich"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:pxa2xx-uart"); diff --git a/drivers/tty/serial/8250/8250_tegra.c b/drivers/tty/serial/8250/8250_tegra.c new file mode 100644 index 000000000..b6694ddfc --- /dev/null +++ b/drivers/tty/serial/8250/8250_tegra.c @@ -0,0 +1,200 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Serial Port driver for Tegra devices + * + * Copyright (c) 2020, NVIDIA CORPORATION. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "8250.h" + +struct tegra_uart { + struct clk *clk; + struct reset_control *rst; + int line; +}; + +static void tegra_uart_handle_break(struct uart_port *p) +{ + unsigned int status, tmout = 10000; + + do { + status = p->serial_in(p, UART_LSR); + if (status & (UART_LSR_FIFOE | UART_LSR_BRK_ERROR_BITS)) + status = p->serial_in(p, UART_RX); + else + break; + if (--tmout == 0) + break; + udelay(1); + } while (1); +} + +static int tegra_uart_probe(struct platform_device *pdev) +{ + struct uart_8250_port port8250; + struct tegra_uart *uart; + struct uart_port *port; + struct resource *res; + int ret; + + uart = devm_kzalloc(&pdev->dev, sizeof(*uart), GFP_KERNEL); + if (!uart) + return -ENOMEM; + + memset(&port8250, 0, sizeof(port8250)); + + port = &port8250.port; + spin_lock_init(&port->lock); + + port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_FIXED_PORT | + UPF_FIXED_TYPE; + port->iotype = UPIO_MEM32; + port->regshift = 2; + port->type = PORT_TEGRA; + port->irqflags |= IRQF_SHARED; + port->dev = &pdev->dev; + port->handle_break = tegra_uart_handle_break; + + ret = of_alias_get_id(pdev->dev.of_node, "serial"); + if (ret >= 0) + port->line = ret; + + ret = platform_get_irq(pdev, 0); + if (ret < 0) + return ret; + + port->irq = ret; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + port->membase = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); + if (!port->membase) + return -ENOMEM; + + port->mapbase = res->start; + port->mapsize = resource_size(res); + + uart->rst = devm_reset_control_get_optional_shared(&pdev->dev, NULL); + if (IS_ERR(uart->rst)) + return PTR_ERR(uart->rst); + + if (device_property_read_u32(&pdev->dev, "clock-frequency", + &port->uartclk)) { + uart->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(uart->clk)) { + dev_err(&pdev->dev, "failed to get clock!\n"); + return -ENODEV; + } + + ret = clk_prepare_enable(uart->clk); + if (ret < 0) + return ret; + + port->uartclk = clk_get_rate(uart->clk); + } + + ret = reset_control_deassert(uart->rst); + if (ret) + goto err_clkdisable; + + ret = serial8250_register_8250_port(&port8250); + if (ret < 0) + goto err_ctrl_assert; + + platform_set_drvdata(pdev, uart); + uart->line = ret; + + return 0; + +err_ctrl_assert: + reset_control_assert(uart->rst); +err_clkdisable: + clk_disable_unprepare(uart->clk); + + return ret; +} + +static int tegra_uart_remove(struct platform_device *pdev) +{ + struct tegra_uart *uart = platform_get_drvdata(pdev); + + serial8250_unregister_port(uart->line); + reset_control_assert(uart->rst); + clk_disable_unprepare(uart->clk); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int tegra_uart_suspend(struct device *dev) +{ + struct tegra_uart *uart = dev_get_drvdata(dev); + struct uart_8250_port *port8250 = serial8250_get_port(uart->line); + struct uart_port *port = &port8250->port; + + serial8250_suspend_port(uart->line); + + if (!uart_console(port) || console_suspend_enabled) + clk_disable_unprepare(uart->clk); + + return 0; +} + +static int tegra_uart_resume(struct device *dev) +{ + struct tegra_uart *uart = dev_get_drvdata(dev); + struct uart_8250_port *port8250 = serial8250_get_port(uart->line); + struct uart_port *port = &port8250->port; + + if (!uart_console(port) || console_suspend_enabled) + clk_prepare_enable(uart->clk); + + serial8250_resume_port(uart->line); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(tegra_uart_pm_ops, tegra_uart_suspend, + tegra_uart_resume); + +static const struct of_device_id tegra_uart_of_match[] = { + { .compatible = "nvidia,tegra20-uart", }, + { }, +}; +MODULE_DEVICE_TABLE(of, tegra_uart_of_match); + +static const struct acpi_device_id tegra_uart_acpi_match[] = { + { "NVDA0100", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(acpi, tegra_uart_acpi_match); + +static struct platform_driver tegra_uart_driver = { + .driver = { + .name = "tegra-uart", + .pm = &tegra_uart_pm_ops, + .of_match_table = tegra_uart_of_match, + .acpi_match_table = ACPI_PTR(tegra_uart_acpi_match), + }, + .probe = tegra_uart_probe, + .remove = tegra_uart_remove, +}; + +module_platform_driver(tegra_uart_driver); + +MODULE_AUTHOR("Jeff Brasen "); +MODULE_DESCRIPTION("NVIDIA Tegra 8250 Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/8250/8250_uniphier.c b/drivers/tty/serial/8250/8250_uniphier.c new file mode 100644 index 000000000..a2978abab --- /dev/null +++ b/drivers/tty/serial/8250/8250_uniphier.c @@ -0,0 +1,307 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2015 Masahiro Yamada + */ + +#include +#include +#include +#include +#include +#include + +#include "8250.h" + +/* + * This hardware is similar to 8250, but its register map is a bit different: + * - MMIO32 (regshift = 2) + * - FCR is not at 2, but 3 + * - LCR and MCR are not at 3 and 4, they share 4 + * - No SCR (Instead, CHAR can be used as a scratch register) + * - Divisor latch at 9, no divisor latch access bit + */ + +#define UNIPHIER_UART_REGSHIFT 2 + +/* bit[15:8] = CHAR, bit[7:0] = FCR */ +#define UNIPHIER_UART_CHAR_FCR (3 << (UNIPHIER_UART_REGSHIFT)) +/* bit[15:8] = LCR, bit[7:0] = MCR */ +#define UNIPHIER_UART_LCR_MCR (4 << (UNIPHIER_UART_REGSHIFT)) +/* Divisor Latch Register */ +#define UNIPHIER_UART_DLR (9 << (UNIPHIER_UART_REGSHIFT)) + +struct uniphier8250_priv { + int line; + struct clk *clk; + spinlock_t atomic_write_lock; +}; + +#ifdef CONFIG_SERIAL_8250_CONSOLE +static int __init uniphier_early_console_setup(struct earlycon_device *device, + const char *options) +{ + if (!device->port.membase) + return -ENODEV; + + /* This hardware always expects MMIO32 register interface. */ + device->port.iotype = UPIO_MEM32; + device->port.regshift = UNIPHIER_UART_REGSHIFT; + + /* + * Do not touch the divisor register in early_serial8250_setup(); + * we assume it has been initialized by a boot loader. + */ + device->baud = 0; + + return early_serial8250_setup(device, options); +} +OF_EARLYCON_DECLARE(uniphier, "socionext,uniphier-uart", + uniphier_early_console_setup); +#endif + +/* + * The register map is slightly different from that of 8250. + * IO callbacks must be overridden for correct access to FCR, LCR, MCR and SCR. + */ +static unsigned int uniphier_serial_in(struct uart_port *p, int offset) +{ + unsigned int valshift = 0; + + switch (offset) { + case UART_SCR: + /* No SCR for this hardware. Use CHAR as a scratch register */ + valshift = 8; + offset = UNIPHIER_UART_CHAR_FCR; + break; + case UART_LCR: + valshift = 8; + fallthrough; + case UART_MCR: + offset = UNIPHIER_UART_LCR_MCR; + break; + default: + offset <<= UNIPHIER_UART_REGSHIFT; + break; + } + + /* + * The return value must be masked with 0xff because some registers + * share the same offset that must be accessed by 32-bit write/read. + * 8 or 16 bit access to this hardware result in unexpected behavior. + */ + return (readl(p->membase + offset) >> valshift) & 0xff; +} + +static void uniphier_serial_out(struct uart_port *p, int offset, int value) +{ + unsigned int valshift = 0; + bool normal = false; + + switch (offset) { + case UART_SCR: + /* No SCR for this hardware. Use CHAR as a scratch register */ + valshift = 8; + fallthrough; + case UART_FCR: + offset = UNIPHIER_UART_CHAR_FCR; + break; + case UART_LCR: + valshift = 8; + /* Divisor latch access bit does not exist. */ + value &= ~UART_LCR_DLAB; + fallthrough; + case UART_MCR: + offset = UNIPHIER_UART_LCR_MCR; + break; + default: + offset <<= UNIPHIER_UART_REGSHIFT; + normal = true; + break; + } + + if (normal) { + writel(value, p->membase + offset); + } else { + /* + * Special case: two registers share the same address that + * must be 32-bit accessed. As this is not longer atomic safe, + * take a lock just in case. + */ + struct uniphier8250_priv *priv = p->private_data; + unsigned long flags; + u32 tmp; + + spin_lock_irqsave(&priv->atomic_write_lock, flags); + tmp = readl(p->membase + offset); + tmp &= ~(0xff << valshift); + tmp |= value << valshift; + writel(tmp, p->membase + offset); + spin_unlock_irqrestore(&priv->atomic_write_lock, flags); + } +} + +/* + * This hardware does not have the divisor latch access bit. + * The divisor latch register exists at different address. + * Override dl_read/write callbacks. + */ +static int uniphier_serial_dl_read(struct uart_8250_port *up) +{ + return readl(up->port.membase + UNIPHIER_UART_DLR); +} + +static void uniphier_serial_dl_write(struct uart_8250_port *up, int value) +{ + writel(value, up->port.membase + UNIPHIER_UART_DLR); +} + +static int uniphier_uart_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct uart_8250_port up; + struct uniphier8250_priv *priv; + struct resource *regs; + void __iomem *membase; + int irq; + int ret; + + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!regs) { + dev_err(dev, "failed to get memory resource\n"); + return -EINVAL; + } + + membase = devm_ioremap(dev, regs->start, resource_size(regs)); + if (!membase) + return -ENOMEM; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + memset(&up, 0, sizeof(up)); + + ret = of_alias_get_id(dev->of_node, "serial"); + if (ret < 0) { + dev_err(dev, "failed to get alias id\n"); + return ret; + } + up.port.line = ret; + + priv->clk = devm_clk_get(dev, NULL); + if (IS_ERR(priv->clk)) { + dev_err(dev, "failed to get clock\n"); + return PTR_ERR(priv->clk); + } + + ret = clk_prepare_enable(priv->clk); + if (ret) + return ret; + + up.port.uartclk = clk_get_rate(priv->clk); + + spin_lock_init(&priv->atomic_write_lock); + + up.port.dev = dev; + up.port.private_data = priv; + up.port.mapbase = regs->start; + up.port.mapsize = resource_size(regs); + up.port.membase = membase; + up.port.irq = irq; + + up.port.type = PORT_16550A; + up.port.iotype = UPIO_MEM32; + up.port.fifosize = 64; + up.port.regshift = UNIPHIER_UART_REGSHIFT; + up.port.flags = UPF_FIXED_PORT | UPF_FIXED_TYPE; + up.capabilities = UART_CAP_FIFO; + + if (of_property_read_bool(dev->of_node, "auto-flow-control")) + up.capabilities |= UART_CAP_AFE; + + up.port.serial_in = uniphier_serial_in; + up.port.serial_out = uniphier_serial_out; + up.dl_read = uniphier_serial_dl_read; + up.dl_write = uniphier_serial_dl_write; + + ret = serial8250_register_8250_port(&up); + if (ret < 0) { + dev_err(dev, "failed to register 8250 port\n"); + clk_disable_unprepare(priv->clk); + return ret; + } + priv->line = ret; + + platform_set_drvdata(pdev, priv); + + return 0; +} + +static int uniphier_uart_remove(struct platform_device *pdev) +{ + struct uniphier8250_priv *priv = platform_get_drvdata(pdev); + + serial8250_unregister_port(priv->line); + clk_disable_unprepare(priv->clk); + + return 0; +} + +static int __maybe_unused uniphier_uart_suspend(struct device *dev) +{ + struct uniphier8250_priv *priv = dev_get_drvdata(dev); + struct uart_8250_port *up = serial8250_get_port(priv->line); + + serial8250_suspend_port(priv->line); + + if (!uart_console(&up->port) || console_suspend_enabled) + clk_disable_unprepare(priv->clk); + + return 0; +} + +static int __maybe_unused uniphier_uart_resume(struct device *dev) +{ + struct uniphier8250_priv *priv = dev_get_drvdata(dev); + struct uart_8250_port *up = serial8250_get_port(priv->line); + int ret; + + if (!uart_console(&up->port) || console_suspend_enabled) { + ret = clk_prepare_enable(priv->clk); + if (ret) + return ret; + } + + serial8250_resume_port(priv->line); + + return 0; +} + +static const struct dev_pm_ops uniphier_uart_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(uniphier_uart_suspend, uniphier_uart_resume) +}; + +static const struct of_device_id uniphier_uart_match[] = { + { .compatible = "socionext,uniphier-uart" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, uniphier_uart_match); + +static struct platform_driver uniphier_uart_platform_driver = { + .probe = uniphier_uart_probe, + .remove = uniphier_uart_remove, + .driver = { + .name = "uniphier-uart", + .of_match_table = uniphier_uart_match, + .pm = &uniphier_uart_pm_ops, + }, +}; +module_platform_driver(uniphier_uart_platform_driver); + +MODULE_AUTHOR("Masahiro Yamada "); +MODULE_DESCRIPTION("UniPhier UART driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig new file mode 100644 index 000000000..b7922c8da --- /dev/null +++ b/drivers/tty/serial/8250/Kconfig @@ -0,0 +1,522 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# The 8250/16550 serial drivers. You shouldn't be in this list unless +# you somehow have an implicit or explicit dependency on SERIAL_8250. +# + +config SERIAL_8250 + tristate "8250/16550 and compatible serial support" + depends on !S390 + select SERIAL_CORE + select SERIAL_MCTRL_GPIO if GPIOLIB + help + This selects whether you want to include the driver for the standard + serial ports. The standard answer is Y. People who might say N + here are those that are setting up dedicated Ethernet WWW/FTP + servers, or users that have one of the various bus mice instead of a + serial mouse and don't intend to use their machine's standard serial + port for anything. (Note that the Cyclades multi serial port driver + does not need this driver built in for it to work.) + + To compile this driver as a module, choose M here: the + module will be called 8250. + [WARNING: Do not compile this driver as a module if you are using + non-standard serial ports, since the configuration information will + be lost when the driver is unloaded. This limitation may be lifted + in the future.] + + BTW1: If you have a mouseman serial mouse which is not recognized by + the X window system, try running gpm first. + + BTW2: If you intend to use a software modem (also called Winmodem) + under Linux, forget it. These modems are crippled and require + proprietary drivers which are only available under Windows. + + Most people will say Y or M here, so that they can use serial mice, + modems and similar devices connecting to the standard serial ports. + +config SERIAL_8250_DEPRECATED_OPTIONS + bool "Support 8250_core.* kernel options (DEPRECATED)" + depends on SERIAL_8250 + default y + help + In 3.7 we renamed 8250 to 8250_core by mistake, so now we have to + accept kernel parameters in both forms like 8250_core.nr_uarts=4 and + 8250.nr_uarts=4. We now renamed the module back to 8250, but if + anybody noticed in 3.7 and changed their userspace we still have to + keep the 8250_core.* options around until they revert the changes + they already did. + + If 8250 is built as a module, this adds 8250_core alias instead. + + If you did not notice yet and/or you have userspace from pre-3.7, it + is safe (and recommended) to say N here. + +config SERIAL_8250_PNP + bool "8250/16550 PNP device support" if EXPERT + depends on SERIAL_8250 && PNP + default y + help + This builds standard PNP serial support. You may be able to + disable this feature if you only need legacy serial support. + +config SERIAL_8250_16550A_VARIANTS + bool "Support for variants of the 16550A serial port" + depends on SERIAL_8250 + default !X86 + help + The 8250 driver can probe for many variants of the venerable 16550A + serial port. Doing so takes additional time at boot. + + On modern systems, especially those using serial only for a simple + console, you can say N here. + +config SERIAL_8250_FINTEK + bool "Support for Fintek F81216A LPC to 4 UART RS485 API" + depends on SERIAL_8250 + help + Selecting this option will add support for the RS485 capabilities + of the Fintek F81216A LPC to 4 UART. + + If this option is not selected the device will be configured as a + standard 16550A serial port. + + If unsure, say N. + +config SERIAL_8250_CONSOLE + bool "Console on 8250/16550 and compatible serial port" + depends on SERIAL_8250=y + select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON + help + If you say Y here, it will be possible to use a serial port as the + system console (the system console is the device which receives all + kernel messages and warnings and which allows logins in single user + mode). This could be useful if some terminal or printer is connected + to that serial port. + + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttyS1". (Try "man bootparam" or see the documentation of + your boot loader (grub or lilo or loadlin) about how to pass options + to the kernel at boot time.) + + If you don't have a VGA card installed and you say Y here, the + kernel will automatically use the first serial line, /dev/ttyS0, as + system console. + + You can set that using a kernel command line option such as + "console=uart8250,io,0x3f8,9600n8" + "console=uart8250,mmio,0xff5e0000,115200n8". + and it will switch to normal serial console when the corresponding + port is ready. + "earlycon=uart8250,io,0x3f8,9600n8" + "earlycon=uart8250,mmio,0xff5e0000,115200n8". + it will not only setup early console. + + If unsure, say N. + +config SERIAL_8250_GSC + tristate + depends on SERIAL_8250 && PARISC + default SERIAL_8250 + +config SERIAL_8250_DMA + bool "DMA support for 16550 compatible UART controllers" if EXPERT + depends on SERIAL_8250 && DMADEVICES=y + default SERIAL_8250 + help + This builds DMA support that can be used with 8250/16650 + compatible UART controllers that support DMA signaling. + +config SERIAL_8250_PCI + tristate "8250/16550 PCI device support" + depends on SERIAL_8250 && PCI + default SERIAL_8250 + help + This builds standard PCI serial support. You may be able to + disable this feature if you only need legacy serial support. + Saves about 9K. + Note that serial ports on NetMos 9835 Multi-I/O cards are handled + by the parport_serial driver, enabled with CONFIG_PARPORT_SERIAL. + +config SERIAL_8250_EXAR + tristate "8250/16550 Exar/Commtech PCI/PCIe device support" + depends on SERIAL_8250_PCI + default SERIAL_8250 + help + This builds support for XR17C1xx, XR17V3xx and some Commtech + 422x PCIe serial cards that are not covered by the more generic + SERIAL_8250_PCI option. + +config SERIAL_8250_HP300 + tristate + depends on SERIAL_8250 && HP300 + default SERIAL_8250 + +config SERIAL_8250_CS + tristate "8250/16550 PCMCIA device support" + depends on PCMCIA && SERIAL_8250 + help + Say Y here to enable support for 16-bit PCMCIA serial devices, + including serial port cards, modems, and the modem functions of + multi-function Ethernet/modem cards. (PCMCIA- or PC-cards are + credit-card size devices often used with laptops.) + + To compile this driver as a module, choose M here: the + module will be called serial_cs. + + If unsure, say N. + +config SERIAL_8250_MEN_MCB + tristate "MEN MCB UART device support" + depends on MCB && SERIAL_8250 + help + This enables support for FPGA based UARTs found on many MEN + boards. This driver enables support for the 16z025, 16z057 + and 16z125 UARTs. + + To compile this driver as a module, chose M here: the + module will be called 8250_men_mcb. + + +config SERIAL_8250_NR_UARTS + int "Maximum number of 8250/16550 serial ports" + depends on SERIAL_8250 + default "4" + help + Set this to the number of serial ports you want the driver + to support. This includes any ports discovered via ACPI or + PCI enumeration and any ports that may be added at run-time + via hot-plug, or any ISA multi-port serial cards. + +config SERIAL_8250_RUNTIME_UARTS + int "Number of 8250/16550 serial ports to register at runtime" + depends on SERIAL_8250 + range 0 SERIAL_8250_NR_UARTS + default "4" + help + Set this to the maximum number of serial ports you want + the kernel to register at boot time. This can be overridden + with the module parameter "nr_uarts", or boot-time parameter + 8250.nr_uarts + +config SERIAL_8250_EXTENDED + bool "Extended 8250/16550 serial driver options" + depends on SERIAL_8250 + help + If you wish to use any non-standard features of the standard "dumb" + driver, say Y here. This includes HUB6 support, shared serial + interrupts, special multiport support, support for more than the + four COM 1/2/3/4 boards, etc. + + Note that the answer to this question won't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about serial driver options. If unsure, say N. + +config SERIAL_8250_MANY_PORTS + bool "Support more than 4 legacy serial ports" + depends on SERIAL_8250_EXTENDED && !IA64 + help + Say Y here if you have dumb serial boards other than the four + standard COM 1/2/3/4 ports. This may happen if you have an AST + FourPort, Accent Async, Boca (read the Boca mini-HOWTO, available + from ), or other custom + serial port hardware which acts similar to standard serial port + hardware. If you only use the standard COM 1/2/3/4 ports, you can + say N here to save some memory. You can also say Y if you have an + "intelligent" multiport card such as Cyclades, Digiboards, etc. + +# +# Multi-port serial cards +# + +config SERIAL_8250_FOURPORT + tristate "Support Fourport cards" + depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS + help + Say Y here if you have an AST FourPort serial board. + + To compile this driver as a module, choose M here: the module + will be called 8250_fourport. + +config SERIAL_8250_ACCENT + tristate "Support Accent cards" + depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS + help + Say Y here if you have an Accent Async serial board. + + To compile this driver as a module, choose M here: the module + will be called 8250_accent. + +config SERIAL_8250_ASPEED_VUART + tristate "Aspeed Virtual UART" + depends on SERIAL_8250 + depends on OF + depends on MFD_SYSCON + depends on ARCH_ASPEED || COMPILE_TEST + select REGMAP + help + If you want to use the virtual UART (VUART) device on Aspeed + BMC platforms, enable this option. This enables the 16550A- + compatible device on the local LPC bus, giving a UART device + with no physical RS232 connections. + +config SERIAL_8250_BOCA + tristate "Support Boca cards" + depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS + help + Say Y here if you have a Boca serial board. Please read the Boca + mini-HOWTO, available from + + To compile this driver as a module, choose M here: the module + will be called 8250_boca. + +config SERIAL_8250_EXAR_ST16C554 + tristate "Support Exar ST16C554/554D Quad UART" + depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS + help + The Uplogix Envoy TU301 uses this Exar Quad UART. If you are + tinkering with your Envoy TU301, or have a machine with this UART, + say Y here. + + To compile this driver as a module, choose M here: the module + will be called 8250_exar_st16c554. + +config SERIAL_8250_HUB6 + tristate "Support Hub6 cards" + depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS + help + Say Y here if you have a HUB6 serial board. + + To compile this driver as a module, choose M here: the module + will be called 8250_hub6. + +# +# Misc. options/drivers. +# + +config SERIAL_8250_SHARE_IRQ + bool "Support for sharing serial interrupts" + depends on SERIAL_8250_EXTENDED + help + Some serial boards have hardware support which allows multiple dumb + serial ports on the same board to share a single IRQ. To enable + support for this in the serial driver, say Y here. + +config SERIAL_8250_DETECT_IRQ + bool "Autodetect IRQ on standard ports (unsafe)" + depends on SERIAL_8250_EXTENDED + help + Say Y here if you want the kernel to try to guess which IRQ + to use for your serial port. + + This is considered unsafe; it is far better to configure the IRQ in + a boot script using the setserial command. + + If unsure, say N. + +config SERIAL_8250_RSA + bool "Support RSA serial ports" + depends on SERIAL_8250_EXTENDED + help + Say Y here if you have a IODATA RSA-DV II/S ISA card and + would like to use its >115kbps speeds. + You will need to provide module parameter "probe_rsa", or boot-time + parameter 8250.probe_rsa with I/O addresses of this card then. + + If you don't have such card, or if unsure, say N. + +config SERIAL_8250_DWLIB + bool + +config SERIAL_8250_ACORN + tristate "Acorn expansion card serial port support" + depends on ARCH_ACORN && SERIAL_8250 + help + If you have an Atomwide Serial card or Serial Port card for an Acorn + system, say Y to this option. The driver can handle 1, 2, or 3 port + cards. If unsure, say N. + +config SERIAL_8250_BCM2835AUX + tristate "BCM2835 auxiliar mini UART support" + depends on ARCH_BCM2835 || COMPILE_TEST + depends on SERIAL_8250 && SERIAL_8250_SHARE_IRQ + help + Support for the BCM2835 auxiliar mini UART. + + Features and limitations of the UART are + Registers are similar to 16650 registers, + set bits in the control registers that are unsupported + are ignored and read back as 0 + 7/8 bit operation with 1 start and 1 stop bit + 8 symbols deep fifo for rx and tx + SW controlled RTS and SW readable CTS + Clock rate derived from system clock + Uses 8 times oversampling (compared to 16 times for 16650) + Missing break detection (but break generation) + Missing framing error detection + Missing parity bit + Missing receive time-out interrupt + Missing DCD, DSR, DTR and RI signals + + If unsure, say N. + +config SERIAL_8250_FSL + bool + depends on SERIAL_8250_CONSOLE + default PPC || ARM || ARM64 + +config SERIAL_8250_DW + tristate "Support for Synopsys DesignWare 8250 quirks" + depends on SERIAL_8250 + select SERIAL_8250_DWLIB + help + Selecting this option will enable handling of the extra features + present in the Synopsys DesignWare APB UART. + +config SERIAL_8250_EM + tristate "Support for Emma Mobile integrated serial port" + depends on SERIAL_8250 && ARM && HAVE_CLK + help + Selecting this option will add support for the integrated serial + port hardware found on the Emma Mobile line of processors. + If unsure, say N. + +config SERIAL_8250_IOC3 + tristate "SGI IOC3 8250 UART support" + depends on SGI_MFD_IOC3 && SERIAL_8250 + select SERIAL_8250_EXTENDED + select SERIAL_8250_SHARE_IRQ + help + Enable this if you have a SGI Origin or Octane machine. This module + provides basic serial support by directly driving the UART chip + behind the IOC3 device on those systems. Maximum baud speed is + 38400bps using this driver. + +config SERIAL_8250_RT288X + bool "Ralink RT288x/RT305x/RT3662/RT3883 serial port support" + depends on SERIAL_8250 + default y if MIPS_ALCHEMY || SOC_RT288X || SOC_RT305X || SOC_RT3883 || SOC_MT7620 + help + Selecting this option will add support for the alternate register + layout used by Ralink RT288x/RT305x, Alchemy Au1xxx, and some others. + If unsure, say N. + +config SERIAL_8250_OMAP + tristate "Support for OMAP internal UART (8250 based driver)" + depends on SERIAL_8250 && (ARCH_OMAP2PLUS || ARCH_K3) + help + If you have a machine based on an Texas Instruments OMAP CPU you + can enable its onboard serial ports by enabling this option. + + This driver uses ttyS instead of ttyO. + +config SERIAL_8250_OMAP_TTYO_FIXUP + bool "Replace ttyO with ttyS" + depends on SERIAL_8250_OMAP=y && SERIAL_8250_CONSOLE + default y + help + This option replaces the "console=ttyO" argument with the matching + ttyS argument if the user did not specified it on the command line. + This ensures that the user can see the kernel output during boot + which he wouldn't see otherwise. The getty has still to be configured + for ttyS instead of ttyO regardless of this option. + This option is intended for people who "automatically" enable this + driver without knowing that this driver requires a different console= + argument. If you read this, please keep this option disabled and + instead update your kernel command line. If you prepare a kernel for a + distribution or other kind of larger user base then you probably want + to keep this option enabled. Otherwise people might complain about a + not booting kernel because the serial console remains silent in case + they forgot to update the command line. + +config SERIAL_8250_LPC18XX + tristate "NXP LPC18xx/43xx serial port support" + depends on SERIAL_8250 && OF && (ARCH_LPC18XX || COMPILE_TEST) + default ARCH_LPC18XX + help + If you have a LPC18xx/43xx based board and want to use the + serial port, say Y to this option. If unsure, say Y. + +config SERIAL_8250_MT6577 + tristate "Mediatek serial port support" + depends on SERIAL_8250 && ARCH_MEDIATEK + help + If you have a Mediatek based board and want to use the + serial port, say Y to this option. If unsure, say N. + +config SERIAL_8250_UNIPHIER + tristate "Support for UniPhier on-chip UART" + depends on SERIAL_8250 + depends on ARCH_UNIPHIER || COMPILE_TEST + help + If you have a UniPhier based board and want to use the on-chip + serial ports, say Y to this option. If unsure, say N. + +config SERIAL_8250_INGENIC + tristate "Support for Ingenic SoC serial ports" + depends on SERIAL_8250 + depends on OF_FLATTREE + depends on MIPS || COMPILE_TEST + help + If you have a system using an Ingenic SoC and wish to make use of + its UARTs, say Y to this option. If unsure, say N. + +config SERIAL_8250_LPSS + tristate "Support for serial ports on Intel LPSS platforms" + default SERIAL_8250 + depends on SERIAL_8250 && PCI + depends on X86 || COMPILE_TEST + select SERIAL_8250_DWLIB + select DW_DMAC_CORE if SERIAL_8250_DMA + select DW_DMAC_PCI if (SERIAL_8250_DMA && X86_INTEL_LPSS) + select RATIONAL + help + Selecting this option will enable handling of the extra features + present on the UART found on various Intel platforms such as: + - Intel Baytrail SoC + - Intel Braswell SoC + - Intel Quark X1000 SoC + +config SERIAL_8250_MID + tristate "Support for serial ports on Intel MID platforms" + default SERIAL_8250 + depends on SERIAL_8250 && PCI + depends on X86 || COMPILE_TEST + select HSU_DMA if SERIAL_8250_DMA + select HSU_DMA_PCI if (HSU_DMA && X86_INTEL_MID) + select RATIONAL + help + Selecting this option will enable handling of the extra features + present on the UART found on Intel Medfield SOC and various other + Intel platforms. + +config SERIAL_8250_PXA + tristate "PXA serial port support" + depends on SERIAL_8250 + depends on ARCH_PXA || ARCH_MMP + help + If you have a machine based on an Intel XScale PXA2xx CPU you can + enable its onboard serial ports by enabling this option. The option is + applicable to both devicetree and legacy boards, and early console is + part of its support. + +config SERIAL_8250_TEGRA + tristate "8250 support for Tegra serial ports" + default SERIAL_8250 + depends on SERIAL_8250 + depends on ARCH_TEGRA || COMPILE_TEST + help + Select this option if you have machine with an NVIDIA Tegra SoC and + wish to enable 8250 serial driver for the Tegra serial interfaces. + +config SERIAL_OF_PLATFORM + tristate "Devicetree based probing for 8250 ports" + depends on SERIAL_8250 && OF + help + This option is used for all 8250 compatible serial ports that + are probed through devicetree, including Open Firmware based + PowerPC systems and embedded systems on architectures using the + flattened device tree format. diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile new file mode 100644 index 000000000..a8bfb654d --- /dev/null +++ b/drivers/tty/serial/8250/Makefile @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for the 8250 serial device drivers. +# + +obj-$(CONFIG_SERIAL_8250) += 8250.o 8250_base.o +8250-y := 8250_core.o +8250-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o +8250_base-y := 8250_port.o +8250_base-$(CONFIG_SERIAL_8250_DMA) += 8250_dma.o +8250_base-$(CONFIG_SERIAL_8250_DWLIB) += 8250_dwlib.o +8250_base-$(CONFIG_SERIAL_8250_FINTEK) += 8250_fintek.o +obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o +obj-$(CONFIG_SERIAL_8250_PCI) += 8250_pci.o +obj-$(CONFIG_SERIAL_8250_EXAR) += 8250_exar.o +obj-$(CONFIG_SERIAL_8250_HP300) += 8250_hp300.o +obj-$(CONFIG_SERIAL_8250_CS) += serial_cs.o +obj-$(CONFIG_SERIAL_8250_ACORN) += 8250_acorn.o +obj-$(CONFIG_SERIAL_8250_ASPEED_VUART) += 8250_aspeed_vuart.o +obj-$(CONFIG_SERIAL_8250_BCM2835AUX) += 8250_bcm2835aux.o +obj-$(CONFIG_SERIAL_8250_CONSOLE) += 8250_early.o +obj-$(CONFIG_SERIAL_8250_FOURPORT) += 8250_fourport.o +obj-$(CONFIG_SERIAL_8250_ACCENT) += 8250_accent.o +obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o +obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o +obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o +obj-$(CONFIG_SERIAL_8250_FSL) += 8250_fsl.o +obj-$(CONFIG_SERIAL_8250_MEN_MCB) += 8250_men_mcb.o +obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o +obj-$(CONFIG_SERIAL_8250_EM) += 8250_em.o +obj-$(CONFIG_SERIAL_8250_IOC3) += 8250_ioc3.o +obj-$(CONFIG_SERIAL_8250_OMAP) += 8250_omap.o +obj-$(CONFIG_SERIAL_8250_LPC18XX) += 8250_lpc18xx.o +obj-$(CONFIG_SERIAL_8250_MT6577) += 8250_mtk.o +obj-$(CONFIG_SERIAL_8250_UNIPHIER) += 8250_uniphier.o +obj-$(CONFIG_SERIAL_8250_INGENIC) += 8250_ingenic.o +obj-$(CONFIG_SERIAL_8250_LPSS) += 8250_lpss.o +obj-$(CONFIG_SERIAL_8250_MID) += 8250_mid.o +obj-$(CONFIG_SERIAL_8250_PXA) += 8250_pxa.o +obj-$(CONFIG_SERIAL_8250_TEGRA) += 8250_tegra.o +obj-$(CONFIG_SERIAL_OF_PLATFORM) += 8250_of.o + +CFLAGS_8250_ingenic.o += -I$(srctree)/scripts/dtc/libfdt diff --git a/drivers/tty/serial/8250/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c new file mode 100644 index 000000000..7c3ea68e5 --- /dev/null +++ b/drivers/tty/serial/8250/serial_cs.c @@ -0,0 +1,876 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MPL-1.1) +/*====================================================================== + + A driver for PCMCIA serial devices + + serial_cs.c 1.134 2002/05/04 05:48:53 + + The contents of this file are subject to the Mozilla Public + License Version 1.1 (the "License"); you may not use this file + except in compliance with the License. You may obtain a copy of + the License at http://www.mozilla.org/MPL/ + + Software distributed under the License is distributed on an "AS + IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + implied. See the License for the specific language governing + rights and limitations under the License. + + The initial developer of the original code is David A. Hinds + . Portions created by David A. Hinds + are Copyright (C) 1999 David A. Hinds. All Rights Reserved. + + Alternatively, the contents of this file may be used under the + terms of the GNU General Public License version 2 (the "GPL"), in which + case the provisions of the GPL are applicable instead of the + above. If you wish to allow the use of your version of this file + only under the terms of the GPL and not to allow others to use + your version of this file under the MPL, indicate your decision + by deleting the provisions above and replace them with the notice + and other provisions required by the GPL. If you do not delete + the provisions above, a recipient may use your version of this + file under either the MPL or the GPL. + +======================================================================*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "8250.h" + + +/*====================================================================*/ + +/* Parameters that can be set with 'insmod' */ + +/* Enable the speaker? */ +static int do_sound = 1; +/* Skip strict UART tests? */ +static int buggy_uart; + +module_param(do_sound, int, 0444); +module_param(buggy_uart, int, 0444); + +/*====================================================================*/ + +/* Table of multi-port card ID's */ + +struct serial_quirk { + unsigned int manfid; + unsigned int prodid; + int multi; /* 1 = multifunction, > 1 = # ports */ + void (*config)(struct pcmcia_device *); + void (*setup)(struct pcmcia_device *, struct uart_8250_port *); + void (*wakeup)(struct pcmcia_device *); + int (*post)(struct pcmcia_device *); +}; + +struct serial_info { + struct pcmcia_device *p_dev; + int ndev; + int multi; + int slave; + int manfid; + int prodid; + int c950ctrl; + int line[4]; + const struct serial_quirk *quirk; +}; + +struct serial_cfg_mem { + tuple_t tuple; + cisparse_t parse; + u_char buf[256]; +}; + +/* + * vers_1 5.0, "Brain Boxes", "2-Port RS232 card", "r6" + * manfid 0x0160, 0x0104 + * This card appears to have a 14.7456MHz clock. + */ +/* Generic Modem: MD55x (GPRS/EDGE) have + * Elan VPU16551 UART with 14.7456MHz oscillator + * manfid 0x015D, 0x4C45 + */ +static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_8250_port *uart) +{ + uart->port.uartclk = 14745600; +} + +static int quirk_post_ibm(struct pcmcia_device *link) +{ + u8 val; + int ret; + + ret = pcmcia_read_config_byte(link, 0x800, &val); + if (ret) + goto failed; + + ret = pcmcia_write_config_byte(link, 0x800, val | 1); + if (ret) + goto failed; + return 0; + + failed: + return -ENODEV; +} + +/* + * Nokia cards are not really multiport cards. Shouldn't this + * be handled by setting the quirk entry .multi = 0 | 1 ? + */ +static void quirk_config_nokia(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + + if (info->multi > 1) + info->multi = 1; +} + +static void quirk_wakeup_oxsemi(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + + if (info->c950ctrl) + outb(12, info->c950ctrl + 1); +} + +/* request_region? oxsemi branch does no request_region too... */ +/* + * This sequence is needed to properly initialize MC45 attached to OXCF950. + * I tried decreasing these msleep()s, but it worked properly (survived + * 1000 stop/start operations) with these timeouts (or bigger). + */ +static void quirk_wakeup_possio_gcc(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + unsigned int ctrl = info->c950ctrl; + + outb(0xA, ctrl + 1); + msleep(100); + outb(0xE, ctrl + 1); + msleep(300); + outb(0xC, ctrl + 1); + msleep(100); + outb(0xE, ctrl + 1); + msleep(200); + outb(0xF, ctrl + 1); + msleep(100); + outb(0xE, ctrl + 1); + msleep(100); + outb(0xC, ctrl + 1); +} + +/* + * Socket Dual IO: this enables irq's for second port + */ +static void quirk_config_socket(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + + if (info->multi) + link->config_flags |= CONF_ENABLE_ESR; +} + +static const struct serial_quirk quirks[] = { + { + .manfid = 0x0160, + .prodid = 0x0104, + .multi = -1, + .setup = quirk_setup_brainboxes_0104, + }, { + .manfid = 0x015D, + .prodid = 0x4C45, + .multi = -1, + .setup = quirk_setup_brainboxes_0104, + }, { + .manfid = MANFID_IBM, + .prodid = ~0, + .multi = -1, + .post = quirk_post_ibm, + }, { + .manfid = MANFID_INTEL, + .prodid = PRODID_INTEL_DUAL_RS232, + .multi = 2, + }, { + .manfid = MANFID_NATINST, + .prodid = PRODID_NATINST_QUAD_RS232, + .multi = 4, + }, { + .manfid = MANFID_NOKIA, + .prodid = ~0, + .multi = -1, + .config = quirk_config_nokia, + }, { + .manfid = MANFID_OMEGA, + .prodid = PRODID_OMEGA_QSP_100, + .multi = 4, + }, { + .manfid = MANFID_OXSEMI, + .prodid = ~0, + .multi = -1, + .wakeup = quirk_wakeup_oxsemi, + }, { + .manfid = MANFID_POSSIO, + .prodid = PRODID_POSSIO_GCC, + .multi = -1, + .wakeup = quirk_wakeup_possio_gcc, + }, { + .manfid = MANFID_QUATECH, + .prodid = PRODID_QUATECH_DUAL_RS232, + .multi = 2, + }, { + .manfid = MANFID_QUATECH, + .prodid = PRODID_QUATECH_DUAL_RS232_D1, + .multi = 2, + }, { + .manfid = MANFID_QUATECH, + .prodid = PRODID_QUATECH_DUAL_RS232_G, + .multi = 2, + }, { + .manfid = MANFID_QUATECH, + .prodid = PRODID_QUATECH_QUAD_RS232, + .multi = 4, + }, { + .manfid = MANFID_SOCKET, + .prodid = PRODID_SOCKET_DUAL_RS232, + .multi = 2, + .config = quirk_config_socket, + }, { + .manfid = MANFID_SOCKET, + .prodid = ~0, + .multi = -1, + .config = quirk_config_socket, + } +}; + + +static int serial_config(struct pcmcia_device *link); + + +static void serial_remove(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + int i; + + dev_dbg(&link->dev, "serial_release\n"); + + /* + * Recheck to see if the device is still configured. + */ + for (i = 0; i < info->ndev; i++) + serial8250_unregister_port(info->line[i]); + + if (!info->slave) + pcmcia_disable_device(link); +} + +static int serial_suspend(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + int i; + + for (i = 0; i < info->ndev; i++) + serial8250_suspend_port(info->line[i]); + + return 0; +} + +static int serial_resume(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + int i; + + for (i = 0; i < info->ndev; i++) + serial8250_resume_port(info->line[i]); + + if (info->quirk && info->quirk->wakeup) + info->quirk->wakeup(link); + + return 0; +} + +static int serial_probe(struct pcmcia_device *link) +{ + struct serial_info *info; + int ret; + + dev_dbg(&link->dev, "serial_attach()\n"); + + /* Create new serial device */ + info = kzalloc(sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + info->p_dev = link; + link->priv = info; + + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + if (do_sound) + link->config_flags |= CONF_ENABLE_SPKR; + + ret = serial_config(link); + if (ret) + goto free_info; + + return 0; + +free_info: + kfree(info); + return ret; +} + +static void serial_detach(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + + dev_dbg(&link->dev, "serial_detach\n"); + + /* + * Ensure that the ports have been released. + */ + serial_remove(link); + + /* free bits */ + kfree(info); +} + +/*====================================================================*/ + +static int setup_serial(struct pcmcia_device *handle, struct serial_info *info, + unsigned int iobase, int irq) +{ + struct uart_8250_port uart; + int line; + + memset(&uart, 0, sizeof(uart)); + uart.port.iobase = iobase; + uart.port.irq = irq; + uart.port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ; + uart.port.uartclk = 1843200; + uart.port.dev = &handle->dev; + if (buggy_uart) + uart.port.flags |= UPF_BUGGY_UART; + + if (info->quirk && info->quirk->setup) + info->quirk->setup(handle, &uart); + + line = serial8250_register_8250_port(&uart); + if (line < 0) { + pr_err("serial_cs: serial8250_register_8250_port() at 0x%04lx, irq %d failed\n", + (unsigned long)iobase, irq); + return -EINVAL; + } + + info->line[info->ndev] = line; + info->ndev++; + + return 0; +} + +/*====================================================================*/ + +static int pfc_config(struct pcmcia_device *p_dev) +{ + unsigned int port = 0; + struct serial_info *info = p_dev->priv; + + if ((p_dev->resource[1]->end != 0) && + (resource_size(p_dev->resource[1]) == 8)) { + port = p_dev->resource[1]->start; + info->slave = 1; + } else if ((info->manfid == MANFID_OSITECH) && + (resource_size(p_dev->resource[0]) == 0x40)) { + port = p_dev->resource[0]->start + 0x28; + info->slave = 1; + } + if (info->slave) + return setup_serial(p_dev, info, port, p_dev->irq); + + dev_warn(&p_dev->dev, "no usable port range found, giving up\n"); + return -ENODEV; +} + +static int simple_config_check(struct pcmcia_device *p_dev, void *priv_data) +{ + static const int size_table[2] = { 8, 16 }; + int *try = priv_data; + + if (p_dev->resource[0]->start == 0) + return -ENODEV; + + if ((*try & 0x1) == 0) + p_dev->io_lines = 16; + + if (p_dev->resource[0]->end != size_table[(*try >> 1)]) + return -ENODEV; + + p_dev->resource[0]->end = 8; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + + return pcmcia_request_io(p_dev); +} + +static int simple_config_check_notpicky(struct pcmcia_device *p_dev, + void *priv_data) +{ + static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; + int j; + + if (p_dev->io_lines > 3) + return -ENODEV; + + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->end = 8; + + for (j = 0; j < 5; j++) { + p_dev->resource[0]->start = base[j]; + p_dev->io_lines = base[j] ? 16 : 3; + if (!pcmcia_request_io(p_dev)) + return 0; + } + return -ENODEV; +} + +static int simple_config(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + int ret, try; + + /* + * First pass: look for a config entry that looks normal. + * Two tries: without IO aliases, then with aliases. + */ + link->config_flags |= CONF_AUTO_SET_VPP; + for (try = 0; try < 4; try++) + if (!pcmcia_loop_config(link, simple_config_check, &try)) + goto found_port; + + /* + * Second pass: try to find an entry that isn't picky about + * its base address, then try to grab any standard serial port + * address, and finally try to get any free port. + */ + if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL)) + goto found_port; + + dev_warn(&link->dev, "no usable port range found, giving up\n"); + return -1; + +found_port: + if (info->multi && (info->manfid == MANFID_3COM)) + link->config_index &= ~(0x08); + + /* + * Apply any configuration quirks. + */ + if (info->quirk && info->quirk->config) + info->quirk->config(link); + + ret = pcmcia_enable_device(link); + if (ret != 0) + return -1; + return setup_serial(link, info, link->resource[0]->start, link->irq); +} + +static int multi_config_check(struct pcmcia_device *p_dev, void *priv_data) +{ + int *multi = priv_data; + + if (p_dev->resource[1]->end) + return -EINVAL; + + /* + * The quad port cards have bad CIS's, so just look for a + * window larger than 8 ports and assume it will be right. + */ + if (p_dev->resource[0]->end <= 8) + return -EINVAL; + + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->end = *multi * 8; + + if (pcmcia_request_io(p_dev)) + return -ENODEV; + return 0; +} + +static int multi_config_check_notpicky(struct pcmcia_device *p_dev, + void *priv_data) +{ + int *base2 = priv_data; + + if (!p_dev->resource[0]->end || !p_dev->resource[1]->end || + p_dev->resource[0]->start + 8 != p_dev->resource[1]->start) + return -ENODEV; + + p_dev->resource[0]->end = p_dev->resource[1]->end = 8; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + + if (pcmcia_request_io(p_dev)) + return -ENODEV; + + *base2 = p_dev->resource[0]->start + 8; + return 0; +} + +static int multi_config(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + int i, base2 = 0; + + /* First, look for a generic full-sized window */ + if (!pcmcia_loop_config(link, multi_config_check, &info->multi)) + base2 = link->resource[0]->start + 8; + else { + /* If that didn't work, look for two windows */ + info->multi = 2; + if (pcmcia_loop_config(link, multi_config_check_notpicky, + &base2)) { + dev_warn(&link->dev, + "no usable port range found, giving up\n"); + return -ENODEV; + } + } + + if (!link->irq) + dev_warn(&link->dev, "no usable IRQ found, continuing...\n"); + + /* + * Apply any configuration quirks. + */ + if (info->quirk && info->quirk->config) + info->quirk->config(link); + + i = pcmcia_enable_device(link); + if (i != 0) + return -ENODEV; + + /* The Oxford Semiconductor OXCF950 cards are in fact single-port: + * 8 registers are for the UART, the others are extra registers. + * Siemen's MC45 PCMCIA (Possio's GCC) is OXCF950 based too. + */ + if (info->manfid == MANFID_OXSEMI || (info->manfid == MANFID_POSSIO && + info->prodid == PRODID_POSSIO_GCC)) { + int err; + + if (link->config_index == 1 || + link->config_index == 3) { + err = setup_serial(link, info, base2, + link->irq); + base2 = link->resource[0]->start; + } else { + err = setup_serial(link, info, link->resource[0]->start, + link->irq); + } + info->c950ctrl = base2; + + /* + * FIXME: We really should wake up the port prior to + * handing it over to the serial layer. + */ + if (info->quirk && info->quirk->wakeup) + info->quirk->wakeup(link); + + return 0; + } + + setup_serial(link, info, link->resource[0]->start, link->irq); + for (i = 0; i < info->multi - 1; i++) + setup_serial(link, info, base2 + (8 * i), + link->irq); + return 0; +} + +static int serial_check_for_multi(struct pcmcia_device *p_dev, void *priv_data) +{ + struct serial_info *info = p_dev->priv; + + if (!p_dev->resource[0]->end) + return -EINVAL; + + if ((!p_dev->resource[1]->end) && (p_dev->resource[0]->end % 8 == 0)) + info->multi = p_dev->resource[0]->end >> 3; + + if ((p_dev->resource[1]->end) && (p_dev->resource[0]->end == 8) + && (p_dev->resource[1]->end == 8)) + info->multi = 2; + + return 0; /* break */ +} + + +static int serial_config(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + int i; + + dev_dbg(&link->dev, "serial_config\n"); + + /* Is this a compliant multifunction card? */ + info->multi = (link->socket->functions > 1); + + /* Is this a multiport card? */ + info->manfid = link->manf_id; + info->prodid = link->card_id; + + for (i = 0; i < ARRAY_SIZE(quirks); i++) + if ((quirks[i].manfid == ~0 || + quirks[i].manfid == info->manfid) && + (quirks[i].prodid == ~0 || + quirks[i].prodid == info->prodid)) { + info->quirk = &quirks[i]; + break; + } + + /* + * Another check for dual-serial cards: look for either serial or + * multifunction cards that ask for appropriate IO port ranges. + */ + if ((info->multi == 0) && + (link->has_func_id) && + (link->socket->pcmcia_pfc == 0) && + ((link->func_id == CISTPL_FUNCID_MULTI) || + (link->func_id == CISTPL_FUNCID_SERIAL))) { + if (pcmcia_loop_config(link, serial_check_for_multi, info)) + goto failed; + } + + /* + * Apply any multi-port quirk. + */ + if (info->quirk && info->quirk->multi != -1) + info->multi = info->quirk->multi; + + dev_info(&link->dev, + "trying to set up [0x%04x:0x%04x] (pfc: %d, multi: %d, quirk: %p)\n", + link->manf_id, link->card_id, + link->socket->pcmcia_pfc, info->multi, info->quirk); + if (link->socket->pcmcia_pfc) + i = pfc_config(link); + else if (info->multi > 1) + i = multi_config(link); + else + i = simple_config(link); + + if (i || info->ndev == 0) + goto failed; + + /* + * Apply any post-init quirk. FIXME: This should really happen + * before we register the port, since it might already be in use. + */ + if (info->quirk && info->quirk->post) + if (info->quirk->post(link)) + goto failed; + + return 0; + +failed: + dev_warn(&link->dev, "failed to initialize\n"); + serial_remove(link); + return -ENODEV; +} + +static const struct pcmcia_device_id serial_ids[] = { + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0104, 0x000a), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0xea15), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0109, 0x0501), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0138, 0x110a), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0140, 0x000a), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0x3341), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0xc0ab), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x016c, 0x0081), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x021b, 0x0101), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x08a1, 0xc0ab), + PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63), + PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63), + PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef), + PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef), + PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea), + PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM33", 0x2e3ee845, 0x80609023), + PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a), + PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29), + PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "ATKK", "LM33-PCM-T", 0xba9eb7e2, 0x077c174e), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "NEC", "PK-UG-J001", 0x18df0ba0, 0x831b1064), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0e01), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0b05), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101), + PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070), + PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562), + PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070), + PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x016c, 0x0020), + PCMCIA_MFC_DEVICE_PROD_ID123(1, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f), + PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c), + PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3), + PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15), + PCMCIA_MFC_DEVICE_PROD_ID1(1, "Motorola MARQUIS", 0xf03e4e77), + PCMCIA_MFC_DEVICE_PROD_ID2(1, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302), + PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0301), + PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x0276), + PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0039), + PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0006), + PCMCIA_DEVICE_MANF_CARD(0x0105, 0x0101), /* TDK DF2814 */ + PCMCIA_DEVICE_MANF_CARD(0x0105, 0x100a), /* Xircom CM-56G */ + PCMCIA_DEVICE_MANF_CARD(0x0105, 0x3e0a), /* TDK DF5660 */ + PCMCIA_DEVICE_MANF_CARD(0x0105, 0x410a), + PCMCIA_DEVICE_MANF_CARD(0x0107, 0x0002), /* USRobotics 14,400 */ + PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d50), + PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d51), + PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d52), + PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d53), + PCMCIA_DEVICE_MANF_CARD(0x010b, 0xd180), + PCMCIA_DEVICE_MANF_CARD(0x0115, 0x3330), /* USRobotics/SUN 14,400 */ + PCMCIA_DEVICE_MANF_CARD(0x0124, 0x0100), /* Nokia DTP-2 ver II */ + PCMCIA_DEVICE_MANF_CARD(0x0134, 0x5600), /* LASAT COMMUNICATIONS A/S */ + PCMCIA_DEVICE_MANF_CARD(0x0137, 0x000e), + PCMCIA_DEVICE_MANF_CARD(0x0137, 0x001b), + PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025), + PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045), + PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052), + PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0006), /* Psion 56K+Fax */ + PCMCIA_DEVICE_MANF_CARD(0x0200, 0x0001), /* MultiMobile */ + PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae), + PCMCIA_DEVICE_PROD_ID124("GATEWAY2000", "CC3144", "PCMCIA MODEM", 0x506bccae, 0xcb3685f1, 0xbd6c43ef), + PCMCIA_DEVICE_PROD_ID14("MEGAHERTZ", "PCMCIA MODEM", 0xf510db04, 0xbd6c43ef), + PCMCIA_DEVICE_PROD_ID124("TOSHIBA", "T144PF", "PCMCIA MODEM", 0xb4585a1a, 0x7271409c, 0xbd6c43ef), + PCMCIA_DEVICE_PROD_ID123("FUJITSU", "FC14F ", "MBH10213", 0x6ee5a3d8, 0x30ead12b, 0xb00f05a0), + PCMCIA_DEVICE_PROD_ID123("Novatel Wireless", "Merlin UMTS Modem", "U630", 0x32607776, 0xd9e73b13, 0xe87332e), + PCMCIA_DEVICE_PROD_ID13("MEGAHERTZ", "V.34 PCMCIA MODEM", 0xf510db04, 0xbb2cce4a), + PCMCIA_DEVICE_PROD_ID12("Brain Boxes", "Bluetooth PC Card", 0xee138382, 0xd4ce9b02), + PCMCIA_DEVICE_PROD_ID12("CIRRUS LOGIC", "FAX MODEM", 0xe625f451, 0xcecd6dfa), + PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 28800 FAX/DATA MODEM", 0xa3a3062c, 0x8cbd7c76), + PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 33600 FAX/DATA MODEM", 0xa3a3062c, 0x5a00ce95), + PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed), + PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65), + PCMCIA_DEVICE_PROD_ID12("IBM", "ISDN/56K/GSM", 0xb569a6e5, 0xfee5297b), + PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6), + PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb), + PCMCIA_DEVICE_PROD_ID12("Intertex", "IX34-PCMCIA", 0xf8a097e3, 0x97880447), + PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f), + PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f), + PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383), + PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e), + PCMCIA_DEVICE_PROD_ID12("OEM ", "C288MX ", 0xb572d360, 0xd2385b7a), + PCMCIA_DEVICE_PROD_ID12("Option International", "V34bis GSM/PSTN Data/Fax Modem", 0x9d7cd6f5, 0x5cb8bf41), + PCMCIA_DEVICE_PROD_ID12("Option International", "GSM-Ready 56K/ISDN", 0x9d7cd6f5, 0xb23844aa), + PCMCIA_DEVICE_PROD_ID12("PCMCIA ", "C336MX ", 0x99bcafe9, 0xaa25bcab), + PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f), + PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "Dual RS-232 Serial Port PC Card", 0xc4420b35, 0x031a380d), + PCMCIA_DEVICE_PROD_ID12("Telia", "SurfinBird 560P/A+", 0xe2cdd5e, 0xc9314b38), + PCMCIA_DEVICE_PROD_ID1("Smart Serial Port", 0x2d8ce292), + PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "cis/PCMLM28.cis"), + PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "cis/PCMLM28.cis"), + PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"), + PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"), + PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"), + PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "TOSHIBA", "Modem/LAN Card", 0xb4585a1a, 0x53f922f8, "cis/PCMLM28.cis"), + PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"), + PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"), + PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "cis/3CCFEM556.cis"), + PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "cis/DP83903.cis"), + PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"), + PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"), + PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */ + PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC860", 0xd85f6206, 0x698f93db, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC860 3G Network Adapter R1 */ + PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC710/AC750", 0xd85f6206, 0x761b11e0, "cis/SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */ + PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */ + PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */ + PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "cis/MT5634ZLX.cis"), + PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "cis/COMpad2.cis"), + PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"), + PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "cis/COMpad2.cis"), + PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"), + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL100 1.00.", 0x19ca78af, 0xf964f42b), + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL100", 0x19ca78af, 0x71d98e83), + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL232 1.00.", 0x19ca78af, 0x69fb7490), + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL232", 0x19ca78af, 0xb6bc0235), + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.", "SERIAL CARD: CF232", 0x63f2e0bd, 0xb9e175d3), + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.", "SERIAL CARD: CF232-5", 0x63f2e0bd, 0xfce33442), + PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF232", 0x3beb8cf2, 0x171e7190), + PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF232-5", 0x3beb8cf2, 0x20da4262), + PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF428", 0x3beb8cf2, 0xea5dd57d), + PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF500", 0x3beb8cf2, 0xd77255fa), + PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: IC232", 0x3beb8cf2, 0x6a709903), + PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: SL232", 0x3beb8cf2, 0x18430676), + PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: XL232", 0x3beb8cf2, 0x6f933767), + PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: CF332", 0x3beb8cf2, 0x16dc1ba7), + PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: SL332", 0x3beb8cf2, 0x19816c41), + PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: SL385", 0x3beb8cf2, 0x64112029), + PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4), + PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial+Parallel Port: SP230", 0x3beb8cf2, 0xdb9e58bc), + PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: CF332", 0x3beb8cf2, 0x16dc1ba7), + PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: SL332", 0x3beb8cf2, 0x19816c41), + PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: SL385", 0x3beb8cf2, 0x64112029), + PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4), + PCMCIA_MFC_DEVICE_PROD_ID12(2, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4), + PCMCIA_MFC_DEVICE_PROD_ID12(3, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4), + PCMCIA_DEVICE_MANF_CARD(0x0279, 0x950b), + /* too generic */ + /* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */ + /* PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0160, 0x0002), */ + PCMCIA_DEVICE_FUNC_ID(2), + PCMCIA_DEVICE_NULL, +}; +MODULE_DEVICE_TABLE(pcmcia, serial_ids); + +MODULE_FIRMWARE("cis/PCMLM28.cis"); +MODULE_FIRMWARE("cis/DP83903.cis"); +MODULE_FIRMWARE("cis/3CCFEM556.cis"); +MODULE_FIRMWARE("cis/3CXEM556.cis"); +MODULE_FIRMWARE("cis/SW_8xx_SER.cis"); +MODULE_FIRMWARE("cis/SW_7xx_SER.cis"); +MODULE_FIRMWARE("cis/SW_555_SER.cis"); +MODULE_FIRMWARE("cis/MT5634ZLX.cis"); +MODULE_FIRMWARE("cis/COMpad2.cis"); +MODULE_FIRMWARE("cis/COMpad4.cis"); +MODULE_FIRMWARE("cis/RS-COM-2P.cis"); + +static struct pcmcia_driver serial_cs_driver = { + .owner = THIS_MODULE, + .name = "serial_cs", + .probe = serial_probe, + .remove = serial_detach, + .id_table = serial_ids, + .suspend = serial_suspend, + .resume = serial_resume, +}; +module_pcmcia_driver(serial_cs_driver); + +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig new file mode 100644 index 000000000..28f22e586 --- /dev/null +++ b/drivers/tty/serial/Kconfig @@ -0,0 +1,1589 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Serial device configuration +# + +menu "Serial drivers" + depends on HAS_IOMEM + +config SERIAL_EARLYCON + bool + depends on SERIAL_CORE + help + Support for early consoles with the earlycon parameter. This enables + the console before standard serial driver is probed. The console is + enabled when early_param is processed. + +source "drivers/tty/serial/8250/Kconfig" + +comment "Non-8250 serial port support" + +config SERIAL_AMBA_PL010 + tristate "ARM AMBA PL010 serial port support" + depends on ARM_AMBA + select SERIAL_CORE + help + This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have + an Integrator/AP or Integrator/PP2 platform, or if you have a + Cirrus Logic EP93xx CPU, say Y or M here. + + If unsure, say N. + +config SERIAL_AMBA_PL010_CONSOLE + bool "Support for console on AMBA serial port" + depends on SERIAL_AMBA_PL010=y + select SERIAL_CORE_CONSOLE + help + Say Y here if you wish to use an AMBA PrimeCell UART as the system + console (the system console is the device which receives all kernel + messages and warnings and which allows logins in single user mode). + + Even if you say Y here, the currently visible framebuffer console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttyAM0". (Try "man bootparam" or see the documentation of + your boot loader (lilo or loadlin) about how to pass options to the + kernel at boot time.) + +config SERIAL_AMBA_PL011 + tristate "ARM AMBA PL011 serial port support" + depends on ARM_AMBA + select SERIAL_CORE + help + This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have + an Integrator/PP2, Integrator/CP or Versatile platform, say Y or M + here. + + If unsure, say N. + +config SERIAL_AMBA_PL011_CONSOLE + bool "Support for console on AMBA serial port" + depends on SERIAL_AMBA_PL011=y + select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON + help + Say Y here if you wish to use an AMBA PrimeCell UART as the system + console (the system console is the device which receives all kernel + messages and warnings and which allows logins in single user mode). + + Even if you say Y here, the currently visible framebuffer console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttyAMA0". (Try "man bootparam" or see the documentation of + your boot loader (lilo or loadlin) about how to pass options to the + kernel at boot time.) + +config SERIAL_EARLYCON_ARM_SEMIHOST + bool "Early console using ARM semihosting" + depends on ARM64 || ARM + select SERIAL_CORE + select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON + help + Support for early debug console using ARM semihosting. This enables + the console before standard serial driver is probed. This is enabled + with "earlycon=smh" on the kernel command line. The console is + enabled when early_param is processed. + +config SERIAL_EARLYCON_RISCV_SBI + bool "Early console using RISC-V SBI" + depends on RISCV_SBI_V01 + select SERIAL_CORE + select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON + help + Support for early debug console using RISC-V SBI. This enables + the console before standard serial driver is probed. This is enabled + with "earlycon=sbi" on the kernel command line. The console is + enabled when early_param is processed. + +config SERIAL_SB1250_DUART + tristate "BCM1xxx on-chip DUART serial support" + depends on SIBYTE_SB1xxx_SOC=y + select SERIAL_CORE + default y + help + Support for the asynchronous serial interface (DUART) included in + the BCM1250 and derived System-On-a-Chip (SOC) devices. Note that + the letter D in DUART stands for "dual", which is how the device + is implemented. Depending on the SOC configuration there may be + one or more DUARTs available of which all are handled. + + If unsure, say Y. To compile this driver as a module, choose M here: + the module will be called sb1250-duart. + +config SERIAL_SB1250_DUART_CONSOLE + bool "Support for console on a BCM1xxx DUART serial port" + depends on SERIAL_SB1250_DUART=y + select SERIAL_CORE_CONSOLE + default y + help + If you say Y here, it will be possible to use a serial port as the + system console (the system console is the device which receives all + kernel messages and warnings and which allows logins in single user + mode). + + If unsure, say Y. + +config SERIAL_ATMEL + bool "AT91 on-chip serial port support" + depends on ARCH_AT91 || COMPILE_TEST + select SERIAL_CORE + select SERIAL_MCTRL_GPIO if GPIOLIB + select MFD_AT91_USART + help + This enables the driver for the on-chip UARTs of the Atmel + AT91 processors. + +config SERIAL_ATMEL_CONSOLE + bool "Support for console on AT91 serial port" + depends on SERIAL_ATMEL=y + select SERIAL_CORE_CONSOLE + help + Say Y here if you wish to use an on-chip UART on a Atmel + AT91 processor as the system console (the system + console is the device which receives all kernel messages and + warnings and which allows logins in single user mode). + +config SERIAL_ATMEL_PDC + bool "Support DMA transfers on AT91 serial port" + depends on SERIAL_ATMEL + default y + help + Say Y here if you wish to use the PDC to do DMA transfers to + and from the Atmel AT91 serial port. In order to + actually use DMA transfers, make sure that the use_dma_tx + and use_dma_rx members in the atmel_uart_data struct is set + appropriately for each port. + + Note that break and error handling currently doesn't work + properly when DMA is enabled. Make sure that ports where + this matters don't use DMA. + +config SERIAL_ATMEL_TTYAT + bool "Install as device ttyATn instead of ttySn" + depends on SERIAL_ATMEL=y + help + Say Y here if you wish to have the internal AT91 UARTs + appear as /dev/ttyATn (major 204, minor starting at 154) + instead of the normal /dev/ttySn (major 4, minor starting at + 64). This is necessary if you also want other UARTs, such as + external 8250/16C550 compatible UARTs. + The ttySn nodes are legally reserved for the 8250 serial driver + but are often misused by other serial drivers. + + To use this, you should create suitable ttyATn device nodes in + /dev/, and pass "console=ttyATn" to the kernel. + + Say Y if you have an external 8250/16C550 UART. If unsure, say N. + +config SERIAL_KGDB_NMI + bool "Serial console over KGDB NMI debugger port" + depends on KGDB_SERIAL_CONSOLE + help + This special driver allows you to temporary use NMI debugger port + as a normal console (assuming that the port is attached to KGDB). + + Unlike KDB's disable_nmi command, with this driver you are always + able to go back to the debugger using KGDB escape sequence ($3#33). + This is because this console driver processes the input in NMI + context, and thus is able to intercept the magic sequence. + + Note that since the console interprets input and uses polling + communication methods, for things like PPP you still must fully + detach debugger port from the KGDB NMI (i.e. disable_nmi), and + use raw console. + + If unsure, say N. + +config SERIAL_MESON + tristate "Meson serial port support" + depends on ARCH_MESON + select SERIAL_CORE + help + This enables the driver for the on-chip UARTs of the Amlogic + MesonX processors. + +config SERIAL_MESON_CONSOLE + bool "Support for console on meson" + depends on SERIAL_MESON=y + select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON + help + Say Y here if you wish to use a Amlogic MesonX UART as the + system console (the system console is the device which + receives all kernel messages and warnings and which allows + logins in single user mode) as /dev/ttyAMLx. + +config SERIAL_CLPS711X + tristate "CLPS711X serial port support" + depends on ARCH_CLPS711X || COMPILE_TEST + select SERIAL_CORE + select SERIAL_MCTRL_GPIO if GPIOLIB + help + This enables the driver for the on-chip UARTs of the Cirrus + Logic EP711x/EP721x/EP731x processors. + +config SERIAL_CLPS711X_CONSOLE + bool "Support for console on CLPS711X serial port" + depends on SERIAL_CLPS711X=y + select SERIAL_CORE_CONSOLE + help + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttyCL1". + +config SERIAL_SAMSUNG + tristate "Samsung SoC serial support" + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST + select SERIAL_CORE + help + Support for the on-chip UARTs on the Samsung S3C24XX series CPUs, + providing /dev/ttySAC0, 1 and 2 (note, some machines may not + provide all of these ports, depending on how the serial port + pins are configured. + +config SERIAL_SAMSUNG_UARTS_4 + bool + depends on SERIAL_SAMSUNG + default y if !(CPU_S3C2410 || CPU_S3C2412 || CPU_S3C2440 || CPU_S3C2442) + help + Internal node for the common case of 4 Samsung compatible UARTs + +config SERIAL_SAMSUNG_UARTS + int + depends on SERIAL_SAMSUNG + default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416 + default 3 + help + Select the number of available UART ports for the Samsung S3C + serial driver + +config SERIAL_SAMSUNG_CONSOLE + bool "Support for console on Samsung SoC serial port" + depends on SERIAL_SAMSUNG=y + select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON + help + Allow selection of the S3C24XX on-board serial ports for use as + an virtual console. + + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttySACx". (Try "man bootparam" or see the documentation of + your boot loader about how to pass options to the kernel at + boot time.) + +config SERIAL_SIRFSOC + tristate "SiRF SoC Platform Serial port support" + depends on ARCH_SIRF + select SERIAL_CORE + help + Support for the on-chip UART on the CSR SiRFprimaII series, + providing /dev/ttySiRF0, 1 and 2 (note, some machines may not + provide all of these ports, depending on how the serial port + pins are configured). + +config SERIAL_SIRFSOC_CONSOLE + bool "Support for console on SiRF SoC serial port" + depends on SERIAL_SIRFSOC=y + select SERIAL_CORE_CONSOLE + help + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttySiRFx". (Try "man bootparam" or see the documentation of + your boot loader about how to pass options to the kernel at + boot time.) + +config SERIAL_TEGRA + tristate "NVIDIA Tegra20/30 SoC serial controller" + depends on ARCH_TEGRA && TEGRA20_APB_DMA + select SERIAL_CORE + help + Support for the on-chip UARTs on the NVIDIA Tegra series SOCs + providing /dev/ttyTHS0, 1, 2, 3 and 4 (note, some machines may not + provide all of these ports, depending on how the serial port + are enabled). This driver uses the APB DMA to achieve higher baudrate + and better performance. + +config SERIAL_TEGRA_TCU + tristate "NVIDIA Tegra Combined UART" + depends on ARCH_TEGRA && TEGRA_HSP_MBOX + select SERIAL_CORE + help + Support for the mailbox-based TCU (Tegra Combined UART) serial port. + TCU is a virtual serial port that allows multiplexing multiple data + streams into a single hardware serial port. + +config SERIAL_TEGRA_TCU_CONSOLE + bool "Support for console on a Tegra TCU serial port" + depends on SERIAL_TEGRA_TCU=y + select SERIAL_CORE_CONSOLE + default y + help + If you say Y here, it will be possible to use a the Tegra TCU as the + system console (the system console is the device which receives all + kernel messages and warnings and which allows logins in single user + mode). + + If unsure, say Y. + +config SERIAL_MAX3100 + tristate "MAX3100 support" + depends on SPI + select SERIAL_CORE + help + MAX3100 chip support + +config SERIAL_MAX310X + tristate "MAX310X support" + depends on SPI_MASTER + select SERIAL_CORE + select REGMAP_SPI if SPI_MASTER + help + This selects support for an advanced UART from Maxim (Dallas). + Supported ICs are MAX3107, MAX3108, MAX3109, MAX14830. + Each IC contains 128 words each of receive and transmit FIFO + that can be controlled through I2C or high-speed SPI. + + Say Y here if you want to support this ICs. + +config SERIAL_DZ + bool "DECstation DZ serial driver" + depends on MACH_DECSTATION && 32BIT + select SERIAL_CORE + default y + help + DZ11-family serial controllers for DECstations and VAXstations, + including the DC7085, M7814, and M7819. + +config SERIAL_DZ_CONSOLE + bool "Support console on DECstation DZ serial driver" + depends on SERIAL_DZ=y + select SERIAL_CORE_CONSOLE + default y + help + If you say Y here, it will be possible to use a serial port as the + system console (the system console is the device which receives all + kernel messages and warnings and which allows logins in single user + mode). + + Note that the firmware uses ttyS3 as the serial console on + DECstations that use this driver. + + If unsure, say Y. + +config SERIAL_ZS + tristate "DECstation Z85C30 serial support" + depends on MACH_DECSTATION + select SERIAL_CORE + default y + help + Support for the Zilog 85C350 serial communications controller used + for serial ports in newer DECstation systems. These include the + DECsystem 5900 and all models of the DECstation and DECsystem 5000 + systems except from model 200. + + If unsure, say Y. To compile this driver as a module, choose M here: + the module will be called zs. + +config SERIAL_ZS_CONSOLE + bool "Support for console on a DECstation Z85C30 serial port" + depends on SERIAL_ZS=y + select SERIAL_CORE_CONSOLE + default y + help + If you say Y here, it will be possible to use a serial port as the + system console (the system console is the device which receives all + kernel messages and warnings and which allows logins in single user + mode). + + Note that the firmware uses ttyS1 as the serial console on the + Maxine and ttyS3 on the others using this driver. + + If unsure, say Y. + +config SERIAL_21285 + tristate "DC21285 serial port support" + depends on FOOTBRIDGE + select SERIAL_CORE + help + If you have a machine based on a 21285 (Footbridge) StrongARM(R)/ + PCI bridge you can enable its onboard serial port by enabling this + option. + +config SERIAL_21285_CONSOLE + bool "Console on DC21285 serial port" + depends on SERIAL_21285=y + select SERIAL_CORE_CONSOLE + help + If you have enabled the serial port on the 21285 footbridge you can + make it the console by answering Y to this option. + + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttyFB". (Try "man bootparam" or see the documentation of + your boot loader (lilo or loadlin) about how to pass options to the + kernel at boot time.) + +config SERIAL_PXA + bool "PXA serial port support (DEPRECATED)" + depends on ARCH_PXA || ARCH_MMP + select SERIAL_CORE + select SERIAL_8250_PXA if SERIAL_8250=y + select SERIAL_PXA_NON8250 if !SERIAL_8250=y + help + If you have a machine based on an Intel XScale PXA2xx CPU you + can enable its onboard serial ports by enabling this option. + + Unless you have a specific need, you should use SERIAL_8250_PXA + instead of this. + +config SERIAL_PXA_NON8250 + bool + depends on !SERIAL_8250 + +config SERIAL_PXA_CONSOLE + bool "Console on PXA serial port (DEPRECATED)" + depends on SERIAL_PXA + select SERIAL_CORE_CONSOLE + select SERIAL_8250_CONSOLE if SERIAL_8250=y + help + If you have enabled the serial port on the Intel XScale PXA + CPU you can make it the console by answering Y to this option. + + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttySA0". (Try "man bootparam" or see the documentation of + your boot loader (lilo or loadlin) about how to pass options to the + kernel at boot time.) + + Unless you have a specific need, you should use SERIAL_8250_PXA + and SERIAL_8250_CONSOLE instead of this. + +config SERIAL_SA1100 + bool "SA1100 serial port support" + depends on ARCH_SA1100 + select SERIAL_CORE + select SERIAL_MCTRL_GPIO if GPIOLIB + help + If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you + can enable its onboard serial port by enabling this option. + Please read for further + info. + +config SERIAL_SA1100_CONSOLE + bool "Console on SA1100 serial port" + depends on SERIAL_SA1100 + select SERIAL_CORE_CONSOLE + help + If you have enabled the serial port on the SA1100/SA1110 StrongARM + CPU you can make it the console by answering Y to this option. + + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttySA0". (Try "man bootparam" or see the documentation of + your boot loader (lilo or loadlin) about how to pass options to the + kernel at boot time.) + +config SERIAL_IMX + tristate "IMX serial port support" + depends on ARCH_MXC || COMPILE_TEST + select SERIAL_CORE + select RATIONAL + select SERIAL_MCTRL_GPIO if GPIOLIB + help + If you have a machine based on a Motorola IMX CPU you + can enable its onboard serial port by enabling this option. + +config SERIAL_IMX_CONSOLE + tristate "Console on IMX serial port" + depends on SERIAL_IMX + select SERIAL_CORE_CONSOLE + help + If you have enabled the serial port on the Freescale IMX + CPU you can make it the console by answering Y/M to this option. + + Even if you say Y/M here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttymxc0". (Try "man bootparam" or see the documentation of + your bootloader about how to pass options to the kernel at boot time.) + +config SERIAL_IMX_EARLYCON + bool "Earlycon on IMX serial port" + depends on ARCH_MXC || COMPILE_TEST + depends on OF + select SERIAL_EARLYCON + select SERIAL_CORE_CONSOLE + default y if SERIAL_IMX_CONSOLE + help + If you have enabled the earlycon on the Freescale IMX + CPU you can make it the earlycon by answering Y to this option. + +config SERIAL_UARTLITE + tristate "Xilinx uartlite serial port support" + depends on HAS_IOMEM + select SERIAL_CORE + help + Say Y here if you want to use the Xilinx uartlite serial controller. + + To compile this driver as a module, choose M here: the + module will be called uartlite. + +config SERIAL_UARTLITE_CONSOLE + bool "Support for console on Xilinx uartlite serial port" + depends on SERIAL_UARTLITE=y + select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON + help + Say Y here if you wish to use a Xilinx uartlite as the system + console (the system console is the device which receives all kernel + messages and warnings and which allows logins in single user mode). + +config SERIAL_UARTLITE_NR_UARTS + int "Maximum number of uartlite serial ports" + depends on SERIAL_UARTLITE + range 1 256 + default 1 + help + Set this to the number of uartlites in your system, or the number + you think you might implement. + +config SERIAL_SUNCORE + bool + depends on SPARC + select SERIAL_CORE + select SERIAL_CORE_CONSOLE + default y + +config SERIAL_SUNZILOG + tristate "Sun Zilog8530 serial support" + depends on SPARC + help + This driver supports the Zilog8530 serial ports found on many Sparc + systems. Say Y or M if you want to be able to these serial ports. + +config SERIAL_SUNZILOG_CONSOLE + bool "Console on Sun Zilog8530 serial port" + depends on SERIAL_SUNZILOG=y + help + If you would like to be able to use the Zilog8530 serial port + on your Sparc system as the console, you can do so by answering + Y to this option. + +config SERIAL_SUNSU + tristate "Sun SU serial support" + depends on SPARC && PCI + help + This driver supports the 8250 serial ports that run the keyboard and + mouse on (PCI) UltraSPARC systems. Say Y or M if you want to be able + to these serial ports. + +config SERIAL_SUNSU_CONSOLE + bool "Console on Sun SU serial port" + depends on SERIAL_SUNSU=y + help + If you would like to be able to use the SU serial port + on your Sparc system as the console, you can do so by answering + Y to this option. + +config SERIAL_MUX + tristate "Serial MUX support" + depends on GSC + select SERIAL_CORE + default y + help + Saying Y here will enable the hardware MUX serial driver for + the Nova, K class systems and D class with a 'remote control card'. + The hardware MUX is not 8250/16550 compatible therefore the + /dev/ttyB0 device is shared between the Serial MUX and the PDC + software console. The following steps need to be completed to use + the Serial MUX: + + 1. create the device entry (mknod /dev/ttyB0 c 11 0) + 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0 + 3. Add device ttyB0 to /etc/securetty (if you want to log on as + root on this console.) + 4. Change the kernel command console parameter to: console=ttyB0 + +config SERIAL_MUX_CONSOLE + bool "Support for console on serial MUX" + depends on SERIAL_MUX=y + select SERIAL_CORE_CONSOLE + default y + +config PDC_CONSOLE + bool "PDC software console support" + depends on PARISC && !SERIAL_MUX && VT + help + Saying Y here will enable the software based PDC console to be + used as the system console. This is useful for machines in + which the hardware based console has not been written yet. The + following steps must be completed to use the PDC console: + + 1. create the device entry (mknod /dev/ttyB0 c 11 0) + 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0 + 3. Add device ttyB0 to /etc/securetty (if you want to log on as + root on this console.) + 4. Change the kernel command console parameter to: console=ttyB0 + +config SERIAL_SUNSAB + tristate "Sun Siemens SAB82532 serial support" + depends on SPARC && PCI + help + This driver supports the Siemens SAB82532 DUSCC serial ports on newer + (PCI) UltraSPARC systems. Say Y or M if you want to be able to these + serial ports. + +config SERIAL_SUNSAB_CONSOLE + bool "Console on Sun Siemens SAB82532 serial port" + depends on SERIAL_SUNSAB=y + help + If you would like to be able to use the SAB82532 serial port + on your Sparc system as the console, you can do so by answering + Y to this option. + +config SERIAL_SUNHV + bool "Sun4v Hypervisor Console support" + depends on SPARC64 + help + This driver supports the console device found on SUN4V Sparc + systems. Say Y if you want to be able to use this device. + +config SERIAL_IP22_ZILOG + tristate "SGI Zilog8530 serial support" + depends on SGI_HAS_ZILOG + select SERIAL_CORE + help + This driver supports the Zilog8530 serial ports found on SGI + systems. Say Y or M if you want to be able to these serial ports. + +config SERIAL_IP22_ZILOG_CONSOLE + bool "Console on SGI Zilog8530 serial port" + depends on SERIAL_IP22_ZILOG=y + select SERIAL_CORE_CONSOLE + +config SERIAL_SH_SCI + tristate "SuperH SCI(F) serial port support" + depends on SUPERH || ARCH_RENESAS || H8300 || COMPILE_TEST + select SERIAL_CORE + select SERIAL_MCTRL_GPIO if GPIOLIB + +config SERIAL_SH_SCI_NR_UARTS + int "Maximum number of SCI(F) serial ports" if EXPERT + range 1 64 if 64BIT + range 1 32 if !64BIT + depends on SERIAL_SH_SCI + default "3" if H8300 + default "10" if SUPERH + default "18" if ARCH_RENESAS + default "2" + +config SERIAL_SH_SCI_CONSOLE + bool "Support for console on SuperH SCI(F)" if EXPERT + depends on SERIAL_SH_SCI=y + select SERIAL_CORE_CONSOLE + default y + +config SERIAL_SH_SCI_EARLYCON + bool "Support for early console on SuperH SCI(F)" if EXPERT + depends on SERIAL_SH_SCI=y + select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON + default ARCH_RENESAS || H8300 + +config SERIAL_SH_SCI_DMA + bool "DMA support" if EXPERT + depends on SERIAL_SH_SCI && DMA_ENGINE + default ARCH_RENESAS + +config SERIAL_PNX8XXX + bool "Enable PNX8XXX SoCs' UART Support" + depends on SOC_PNX833X + select SERIAL_CORE + help + If you have a MIPS-based Philips SoC such as PNX8330 and you want + to use serial ports, say Y. Otherwise, say N. + +config SERIAL_PNX8XXX_CONSOLE + bool "Enable PNX8XX0 serial console" + depends on SERIAL_PNX8XXX + select SERIAL_CORE_CONSOLE + help + If you have a MIPS-based Philips SoC such as PNX8330 and you want + to use serial console, say Y. Otherwise, say N. + +config SERIAL_HS_LPC32XX + tristate "LPC32XX high speed serial port support" + depends on ARCH_LPC32XX || COMPILE_TEST + depends on OF + select SERIAL_CORE + help + Support for the LPC32XX high speed serial ports (up to 900kbps). + Those are UARTs completely different from the Standard UARTs on the + LPC32XX SoC. + Choose M or Y here to build this driver. + +config SERIAL_HS_LPC32XX_CONSOLE + bool "Enable LPC32XX high speed UART serial console" + depends on SERIAL_HS_LPC32XX=y + select SERIAL_CORE_CONSOLE + help + If you would like to be able to use one of the high speed serial + ports on the LPC32XX as the console, you can do so by answering + Y to this option. + +config SERIAL_CORE + tristate + +config SERIAL_CORE_CONSOLE + bool + +config CONSOLE_POLL + bool + +config SERIAL_MCF + bool "Coldfire serial support" + depends on COLDFIRE + select SERIAL_CORE + help + This serial driver supports the Freescale Coldfire serial ports. + +config SERIAL_MCF_BAUDRATE + int "Default baudrate for Coldfire serial ports" + depends on SERIAL_MCF + default 19200 + help + This setting lets you define what the default baudrate is for the + ColdFire serial ports. The usual default varies from board to board, + and this setting is a way of catering for that. + +config SERIAL_MCF_CONSOLE + bool "Coldfire serial console support" + depends on SERIAL_MCF + select SERIAL_CORE_CONSOLE + help + Enable a ColdFire internal serial port to be the system console. + +config SERIAL_PMACZILOG + tristate "Mac or PowerMac z85c30 ESCC support" + depends on (M68K && MAC) || PPC_PMAC + select SERIAL_CORE + help + This driver supports the Zilog z85C30 serial ports found on + (Power)Mac machines. + Say Y or M if you want to be able to these serial ports. + +config SERIAL_PMACZILOG_TTYS + bool "Use ttySn device nodes for Zilog z85c30" + depends on SERIAL_PMACZILOG + help + The pmac_zilog driver for the z85C30 chip on many powermacs + historically used the device numbers for /dev/ttySn. The + 8250 serial port driver also uses these numbers, which means + the two drivers being unable to coexist; you could not use + both z85C30 and 8250 type ports at the same time. + + If this option is not selected, the pmac_zilog driver will + use the device numbers allocated for /dev/ttyPZn. This allows + the pmac_zilog and 8250 drivers to co-exist, but may cause + existing userspace setups to break. Programs that need to + access the built-in serial ports on powermacs will need to + be reconfigured to use /dev/ttyPZn instead of /dev/ttySn. + + If you enable this option, any z85c30 ports in the system will + be registered as ttyS0 onwards as in the past, and you will be + unable to use the 8250 module for PCMCIA or other 16C550-style + UARTs. + + Say N unless you need the z85c30 ports on your (Power)Mac + to appear as /dev/ttySn. + +config SERIAL_PMACZILOG_CONSOLE + bool "Console on Mac or PowerMac z85c30 serial port" + depends on SERIAL_PMACZILOG=y + select SERIAL_CORE_CONSOLE + help + If you would like to be able to use the z85c30 serial port + on your (Power)Mac as the console, you can do so by answering + Y to this option. + +config SERIAL_CPM + tristate "CPM SCC/SMC serial port support" + depends on CPM2 || CPM1 + select SERIAL_CORE + help + This driver supports the SCC and SMC serial ports on Motorola + embedded PowerPC that contain a CPM1 (8xx) or CPM2 (8xxx) + +config SERIAL_CPM_CONSOLE + bool "Support for console on CPM SCC/SMC serial port" + depends on SERIAL_CPM=y + select SERIAL_CORE_CONSOLE + help + Say Y here if you wish to use a SCC or SMC CPM UART as the system + console (the system console is the device which receives all kernel + messages and warnings and which allows logins in single user mode). + + Even if you say Y here, the currently visible framebuffer console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttyCPM0". (Try "man bootparam" or see the documentation of + your boot loader (lilo or loadlin) about how to pass options to the + kernel at boot time.) + +config SERIAL_PIC32 + tristate "Microchip PIC32 serial support" + depends on MACH_PIC32 + select SERIAL_CORE + help + If you have a PIC32, this driver supports the serial ports. + + Say Y or M to use PIC32 serial ports, otherwise say N. Note that + to use a serial port as a console, this must be included in kernel and + not as a module. + +config SERIAL_PIC32_CONSOLE + bool "PIC32 serial console support" + depends on SERIAL_PIC32 + select SERIAL_CORE_CONSOLE + help + If you have a PIC32, this driver supports the putting a console on one + of the serial ports. + + Say Y to use the PIC32 console, otherwise say N. + +config SERIAL_MPC52xx + tristate "Freescale MPC52xx/MPC512x family PSC serial support" + depends on PPC_MPC52xx || PPC_MPC512x + select SERIAL_CORE + help + This driver supports MPC52xx and MPC512x PSC serial ports. If you would + like to use them, you must answer Y or M to this option. Note that + for use as console, it must be included in kernel and not as a + module. + +config SERIAL_MPC52xx_CONSOLE + bool "Console on a Freescale MPC52xx/MPC512x family PSC serial port" + depends on SERIAL_MPC52xx=y + select SERIAL_CORE_CONSOLE + help + Select this options if you'd like to use one of the PSC serial port + of the Freescale MPC52xx family as a console. + +config SERIAL_MPC52xx_CONSOLE_BAUD + int "Freescale MPC52xx/MPC512x family PSC serial port baud" + depends on SERIAL_MPC52xx_CONSOLE=y + default "9600" + help + Select the MPC52xx console baud rate. + This value is only used if the bootloader doesn't pass in the + console baudrate + +config SERIAL_ICOM + tristate "IBM Multiport Serial Adapter" + depends on PCI && PPC_PSERIES + select SERIAL_CORE + select FW_LOADER + help + This driver is for a family of multiport serial adapters + including 2 port RVX, 2 port internal modem, 4 port internal + modem and a split 1 port RVX and 1 port internal modem. + + This driver can also be built as a module. If so, the module + will be called icom. + +config SERIAL_TXX9 + bool "TMPTX39XX/49XX SIO support" + depends on HAS_TXX9_SERIAL + select SERIAL_CORE + default y + +config HAS_TXX9_SERIAL + bool + +config SERIAL_TXX9_NR_UARTS + int "Maximum number of TMPTX39XX/49XX SIO ports" + depends on SERIAL_TXX9 + default "6" + +config SERIAL_TXX9_CONSOLE + bool "TMPTX39XX/49XX SIO Console support" + depends on SERIAL_TXX9=y + select SERIAL_CORE_CONSOLE + +config SERIAL_TXX9_STDSERIAL + bool "TX39XX/49XX SIO act as standard serial" + depends on !SERIAL_8250 && SERIAL_TXX9 + +config SERIAL_VR41XX + tristate "NEC VR4100 series Serial Interface Unit support" + depends on CPU_VR41XX + select SERIAL_CORE + help + If you have a NEC VR4100 series processor and you want to use + Serial Interface Unit(SIU) or Debug Serial Interface Unit(DSIU) + (not include VR4111/VR4121 DSIU), say Y. Otherwise, say N. + +config SERIAL_VR41XX_CONSOLE + bool "Enable NEC VR4100 series Serial Interface Unit console" + depends on SERIAL_VR41XX=y + select SERIAL_CORE_CONSOLE + help + If you have a NEC VR4100 series processor and you want to use + a console on a serial port, say Y. Otherwise, say N. + +config SERIAL_JSM + tristate "Digi International NEO and Classic PCI Support" + depends on PCI + select SERIAL_CORE + help + This is a driver for Digi International's Neo and Classic series + of cards which provide multiple serial ports. You would need + something like this to connect more than two modems to your Linux + box, for instance in order to become a dial-in server. This driver + supports PCI boards only. + + If you have a card like this, say Y here, otherwise say N. + + To compile this driver as a module, choose M here: the + module will be called jsm. + +config SERIAL_MSM + tristate "MSM on-chip serial port support" + depends on ARCH_QCOM + select SERIAL_CORE + +config SERIAL_MSM_CONSOLE + bool "MSM serial console support" + depends on SERIAL_MSM=y + select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON + +config SERIAL_QCOM_GENI + tristate "QCOM on-chip GENI based serial port support" + depends on ARCH_QCOM || COMPILE_TEST + depends on QCOM_GENI_SE + select SERIAL_CORE + +config SERIAL_QCOM_GENI_CONSOLE + bool "QCOM GENI Serial Console support" + depends on SERIAL_QCOM_GENI + select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON + help + Serial console driver for Qualcomm Technologies Inc's GENI based + QUP hardware. + +config SERIAL_VT8500 + bool "VIA VT8500 on-chip serial port support" + depends on ARCH_VT8500 + select SERIAL_CORE + +config SERIAL_VT8500_CONSOLE + bool "VIA VT8500 serial console support" + depends on SERIAL_VT8500=y + select SERIAL_CORE_CONSOLE + +config SERIAL_OMAP + tristate "OMAP serial port support" + depends on ARCH_OMAP2PLUS + select SERIAL_CORE + help + If you have a machine based on an Texas Instruments OMAP CPU you + can enable its onboard serial ports by enabling this option. + + By enabling this option you take advantage of dma feature available + with the omap-serial driver. DMA support can be enabled from platform + data. + +config SERIAL_OMAP_CONSOLE + bool "Console on OMAP serial port" + depends on SERIAL_OMAP=y + select SERIAL_CORE_CONSOLE + help + Select this option if you would like to use omap serial port as + console. + + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttyOx". (Try "man bootparam" or see the documentation of + your boot loader about how to pass options to the kernel at + boot time.) + +config SERIAL_SIFIVE + tristate "SiFive UART support" + depends on OF + select SERIAL_CORE + help + Select this option if you are building a kernel for a device that + contains a SiFive UART IP block. This type of UART is present on + SiFive FU540 SoCs, among others. + +config SERIAL_SIFIVE_CONSOLE + bool "Console on SiFive UART" + depends on SERIAL_SIFIVE=y + select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON + help + Select this option if you would like to use a SiFive UART as the + system console. + + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttySIFx". (Try "man bootparam" or see the documentation of + your boot loader about how to pass options to the kernel at + boot time.) + +config SERIAL_LANTIQ + tristate "Lantiq serial driver" + depends on (LANTIQ || X86) || COMPILE_TEST + select SERIAL_CORE + help + Support for UART on Lantiq and Intel SoCs. + To compile this driver as a module, select M here. The + module will be called lantiq. + +config SERIAL_LANTIQ_CONSOLE + bool "Console on Lantiq UART" + depends on SERIAL_LANTIQ=y + select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON + help + Select this option if you would like to use a Lantiq UART as the + system console. + +config SERIAL_QE + tristate "Freescale QUICC Engine serial port support" + depends on QUICC_ENGINE + select SERIAL_CORE + select FW_LOADER + help + This driver supports the QE serial ports on Freescale embedded + PowerPC that contain a QUICC Engine. + +config SERIAL_SCCNXP + tristate "SCCNXP serial port support" + select SERIAL_CORE + help + This selects support for an advanced UART from NXP (Philips). + Supported ICs are SCC2681, SCC2691, SCC2692, SC28L91, SC28L92, + SC28L202, SCC68681 and SCC68692. + +config SERIAL_SCCNXP_CONSOLE + bool "Console on SCCNXP serial port" + depends on SERIAL_SCCNXP=y + select SERIAL_CORE_CONSOLE + help + Support for console on SCCNXP serial ports. + +config SERIAL_SC16IS7XX_CORE + tristate + +config SERIAL_SC16IS7XX + tristate "SC16IS7xx serial support" + select SERIAL_CORE + depends on (SPI_MASTER && !I2C) || I2C + help + This selects support for SC16IS7xx serial ports. + Supported ICs are SC16IS740, SC16IS741, SC16IS750, SC16IS752, + SC16IS760 and SC16IS762. Select supported buses using options below. + +config SERIAL_SC16IS7XX_I2C + bool "SC16IS7xx for I2C interface" + depends on SERIAL_SC16IS7XX + depends on I2C + select SERIAL_SC16IS7XX_CORE if SERIAL_SC16IS7XX + select REGMAP_I2C if I2C + default y + help + Enable SC16IS7xx driver on I2C bus, + If required say y, and say n to i2c if not required, + Enabled by default to support oldconfig. + You must select at least one bus for the driver to be built. + +config SERIAL_SC16IS7XX_SPI + bool "SC16IS7xx for spi interface" + depends on SERIAL_SC16IS7XX + depends on SPI_MASTER + select SERIAL_SC16IS7XX_CORE if SERIAL_SC16IS7XX + select REGMAP_SPI if SPI_MASTER + help + Enable SC16IS7xx driver on SPI bus, + If required say y, and say n to spi if not required, + This is additional support to existing driver. + You must select at least one bus for the driver to be built. + +config SERIAL_TIMBERDALE + tristate "Support for timberdale UART" + select SERIAL_CORE + depends on X86_32 || COMPILE_TEST + help + Add support for UART controller on timberdale. + +config SERIAL_BCM63XX + tristate "Broadcom BCM63xx/BCM33xx UART support" + select SERIAL_CORE + depends on MIPS || ARM || COMPILE_TEST + help + This enables the driver for the onchip UART core found on + the following chipsets: + + BCM33xx (cable modem) + BCM63xx/BCM63xxx (DSL) + BCM68xx (PON) + BCM7xxx (STB) - DOCSIS console + +config SERIAL_BCM63XX_CONSOLE + bool "Console on BCM63xx serial port" + depends on SERIAL_BCM63XX=y + select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON + help + If you have enabled the serial port on the BCM63xx CPU + you can make it the console by answering Y to this option. + +config SERIAL_GRLIB_GAISLER_APBUART + tristate "GRLIB APBUART serial support" + depends on OF && SPARC + select SERIAL_CORE + help + Add support for the GRLIB APBUART serial port. + +config SERIAL_GRLIB_GAISLER_APBUART_CONSOLE + bool "Console on GRLIB APBUART serial port" + depends on SERIAL_GRLIB_GAISLER_APBUART=y + select SERIAL_CORE_CONSOLE + help + Support for running a console on the GRLIB APBUART + +config SERIAL_ALTERA_JTAGUART + tristate "Altera JTAG UART support" + select SERIAL_CORE + help + This driver supports the Altera JTAG UART port. + +config SERIAL_ALTERA_JTAGUART_CONSOLE + bool "Altera JTAG UART console support" + depends on SERIAL_ALTERA_JTAGUART=y + select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON + help + Enable a Altera JTAG UART port to be the system console. + +config SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS + bool "Bypass output when no connection" + depends on SERIAL_ALTERA_JTAGUART_CONSOLE + select SERIAL_CORE_CONSOLE + help + Bypass console output and keep going even if there is no + JTAG terminal connection with the host. + +config SERIAL_ALTERA_UART + tristate "Altera UART support" + select SERIAL_CORE + help + This driver supports the Altera softcore UART port. + +config SERIAL_ALTERA_UART_MAXPORTS + int "Maximum number of Altera UART ports" + depends on SERIAL_ALTERA_UART + default 4 + help + This setting lets you define the maximum number of the Altera + UART ports. The usual default varies from board to board, and + this setting is a way of catering for that. + +config SERIAL_ALTERA_UART_BAUDRATE + int "Default baudrate for Altera UART ports" + depends on SERIAL_ALTERA_UART + default 115200 + help + This setting lets you define what the default baudrate is for the + Altera UART ports. The usual default varies from board to board, + and this setting is a way of catering for that. + +config SERIAL_ALTERA_UART_CONSOLE + bool "Altera UART console support" + depends on SERIAL_ALTERA_UART=y + select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON + help + Enable a Altera UART port to be the system console. + +config SERIAL_IFX6X60 + tristate "SPI protocol driver for Infineon 6x60 modem (EXPERIMENTAL)" + depends on GPIOLIB || COMPILE_TEST + depends on SPI && HAS_DMA + help + Support for the IFX6x60 modem devices on Intel MID platforms. + +config SERIAL_PCH_UART + tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) UART" + depends on PCI && (X86_32 || MIPS || COMPILE_TEST) + select SERIAL_CORE + help + This driver is for PCH(Platform controller Hub) UART of Intel EG20T + which is an IOH(Input/Output Hub) for x86 embedded processor. + Enabling PCH_DMA, this PCH UART works as DMA mode. + + This driver also can be used for LAPIS Semiconductor IOH(Input/ + Output Hub), ML7213, ML7223 and ML7831. + ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is + for MP(Media Phone) use and ML7831 IOH is for general purpose use. + ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series. + ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH. + +config SERIAL_PCH_UART_CONSOLE + bool "Support for console on Intel EG20T PCH UART/OKI SEMICONDUCTOR ML7213 IOH" + depends on SERIAL_PCH_UART=y + select SERIAL_CORE_CONSOLE + help + Say Y here if you wish to use the PCH UART as the system console + (the system console is the device which receives all kernel messages and + warnings and which allows logins in single user mode). + +config SERIAL_MXS_AUART + tristate "MXS AUART support" + depends on ARCH_MXS || MACH_ASM9260 || COMPILE_TEST + select SERIAL_CORE + select SERIAL_MCTRL_GPIO if GPIOLIB + help + This driver supports the MXS and Alphascale ASM9260 Application + UART (AUART) port. + +config SERIAL_MXS_AUART_CONSOLE + bool "MXS AUART console support" + depends on SERIAL_MXS_AUART=y + select SERIAL_CORE_CONSOLE + help + Enable a MXS AUART port to be the system console. + +config SERIAL_XILINX_PS_UART + tristate "Cadence (Xilinx Zynq) UART support" + depends on OF + select SERIAL_CORE + help + This driver supports the Cadence UART. It is found e.g. in Xilinx + Zynq. + +config SERIAL_XILINX_PS_UART_CONSOLE + bool "Cadence UART console support" + depends on SERIAL_XILINX_PS_UART=y + select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON + help + Enable a Cadence UART port to be the system console. + +config SERIAL_AR933X + tristate "AR933X serial port support" + depends on HAVE_CLK && ATH79 + select SERIAL_CORE + select SERIAL_MCTRL_GPIO if GPIOLIB + help + If you have an Atheros AR933X SOC based board and want to use the + built-in UART of the SoC, say Y to this option. + + To compile this driver as a module, choose M here: the + module will be called ar933x_uart. + +config SERIAL_AR933X_CONSOLE + bool "Console on AR933X serial port" + depends on SERIAL_AR933X=y + select SERIAL_CORE_CONSOLE + help + Enable a built-in UART port of the AR933X to be the system console. + +config SERIAL_AR933X_NR_UARTS + int "Maximum number of AR933X serial ports" + depends on SERIAL_AR933X + default "2" + help + Set this to the number of serial ports you want the driver + to support. + +config SERIAL_EFM32_UART + tristate "EFM32 UART/USART port" + depends on ARM && (ARCH_EFM32 || COMPILE_TEST) + select SERIAL_CORE + help + This driver support the USART and UART ports on + Energy Micro's efm32 SoCs. + +config SERIAL_MPS2_UART_CONSOLE + bool "MPS2 UART console support" + depends on SERIAL_MPS2_UART + select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON + +config SERIAL_MPS2_UART + bool "MPS2 UART port" + depends on ARCH_MPS2 || COMPILE_TEST + select SERIAL_CORE + help + This driver support the UART ports on ARM MPS2. + +config SERIAL_EFM32_UART_CONSOLE + bool "EFM32 UART/USART console support" + depends on SERIAL_EFM32_UART=y + select SERIAL_CORE_CONSOLE + +config SERIAL_ARC + tristate "ARC UART driver support" + select SERIAL_CORE + help + Driver for on-chip UART for ARC(Synopsys) for the legacy + FPGA Boards (ML50x/ARCAngel4) + +config SERIAL_ARC_CONSOLE + bool "Console on ARC UART" + depends on SERIAL_ARC=y + select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON + help + Enable system Console on ARC UART + +config SERIAL_ARC_NR_PORTS + int "Number of ARC UART ports" + depends on SERIAL_ARC + range 1 3 + default "1" + help + Set this to the number of serial ports you want the driver + to support. + +config SERIAL_RP2 + tristate "Comtrol RocketPort EXPRESS/INFINITY support" + depends on PCI + select SERIAL_CORE + help + This driver supports the Comtrol RocketPort EXPRESS and + RocketPort INFINITY families of PCI/PCIe multiport serial adapters. + These adapters use a "RocketPort 2" ASIC that is not compatible + with the original RocketPort driver (CONFIG_ROCKETPORT). + + To compile this driver as a module, choose M here: the + module will be called rp2. + + If you want to compile this driver into the kernel, say Y here. If + you don't have a suitable RocketPort card installed, say N. + +config SERIAL_RP2_NR_UARTS + int "Maximum number of RocketPort EXPRESS/INFINITY ports" + depends on SERIAL_RP2 + default "32" + help + If multiple cards are present, the default limit of 32 ports may + need to be increased. + +config SERIAL_FSL_LPUART + tristate "Freescale lpuart serial port support" + depends on HAS_DMA + select SERIAL_CORE + help + Support for the on-chip lpuart on some Freescale SOCs. + +config SERIAL_FSL_LPUART_CONSOLE + bool "Console on Freescale lpuart serial port" + depends on SERIAL_FSL_LPUART=y + select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON + help + If you have enabled the lpuart serial port on the Freescale SoCs, + you can make it the console by answering Y to this option. + +config SERIAL_FSL_LINFLEXUART + tristate "Freescale LINFlexD UART serial port support" + depends on PRINTK + select SERIAL_CORE + help + Support for the on-chip LINFlexD UART on some Freescale SOCs. + +config SERIAL_FSL_LINFLEXUART_CONSOLE + bool "Console on Freescale LINFlexD UART serial port" + depends on SERIAL_FSL_LINFLEXUART=y + select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON + help + If you have enabled the LINFlexD UART serial port on the Freescale + SoCs, you can make it the console by answering Y to this option. + +config SERIAL_CONEXANT_DIGICOLOR + tristate "Conexant Digicolor CX92xxx USART serial port support" + depends on OF + select SERIAL_CORE + help + Support for the on-chip USART on Conexant Digicolor SoCs. + +config SERIAL_CONEXANT_DIGICOLOR_CONSOLE + bool "Console on Conexant Digicolor serial port" + depends on SERIAL_CONEXANT_DIGICOLOR=y + select SERIAL_CORE_CONSOLE + help + If you have enabled the USART serial port on Conexant Digicolor + SoCs, you can make it the console by answering Y to this option. + +config SERIAL_ST_ASC + tristate "ST ASC serial port support" + select SERIAL_CORE + depends on ARM || COMPILE_TEST + help + This driver is for the on-chip Asychronous Serial Controller on + STMicroelectronics STi SoCs. + ASC is embedded in ST COMMS IP block. It supports Rx & Tx functionality. + It support all industry standard baud rates. + + If unsure, say N. + +config SERIAL_ST_ASC_CONSOLE + bool "Support for console on ST ASC" + depends on SERIAL_ST_ASC=y + select SERIAL_CORE_CONSOLE + +config SERIAL_MEN_Z135 + tristate "MEN 16z135 Support" + select SERIAL_CORE + depends on MCB + help + Say yes here to enable support for the MEN 16z135 High Speed UART IP-Core + on a MCB carrier. + + This driver can also be build as a module. If so, the module will be called + men_z135_uart.ko + +config SERIAL_SPRD + tristate "Support for Spreadtrum serial" + select SERIAL_CORE + depends on COMMON_CLK + help + This enables the driver for the Spreadtrum's serial. + +config SERIAL_SPRD_CONSOLE + bool "Spreadtrum UART console support" + depends on SERIAL_SPRD=y + select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON + help + Support for early debug console using Spreadtrum's serial. This enables + the console before standard serial driver is probed. This is enabled + with "earlycon" on the kernel command line. The console is + enabled when early_param is processed. + +config SERIAL_STM32 + tristate "STMicroelectronics STM32 serial port support" + select SERIAL_CORE + depends on ARCH_STM32 || COMPILE_TEST + select SERIAL_MCTRL_GPIO if GPIOLIB + help + This driver is for the on-chip Serial Controller on + STMicroelectronics STM32 MCUs. + USART supports Rx & Tx functionality. + It support all industry standard baud rates. + + If unsure, say N. + +config SERIAL_STM32_CONSOLE + bool "Support for console on STM32" + depends on SERIAL_STM32=y + select SERIAL_CORE_CONSOLE + +config SERIAL_MVEBU_UART + bool "Marvell EBU serial port support" + depends on ARCH_MVEBU || COMPILE_TEST + select SERIAL_CORE + help + This driver is for Marvell EBU SoC's UART. If you have a machine + based on the Armada-3700 SoC and wish to use the on-board serial + port, + say 'Y' here. + Otherwise, say 'N'. + +config SERIAL_MVEBU_CONSOLE + bool "Console on Marvell EBU serial port" + depends on SERIAL_MVEBU_UART + select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON + default y + help + Say 'Y' here if you wish to use Armada-3700 UART as the system console. + (the system console is the device which receives all kernel messages + and warnings and which allows logins in single user mode) + Otherwise, say 'N'. + +config SERIAL_OWL + tristate "Actions Semi Owl serial port support" + depends on ARCH_ACTIONS || COMPILE_TEST + select SERIAL_CORE + help + This driver is for Actions Semiconductor S500/S900 SoC's UART. + Say 'Y' here if you wish to use the on-board serial port. + Otherwise, say 'N'. + +config SERIAL_OWL_CONSOLE + bool "Console on Actions Semi Owl serial port" + depends on SERIAL_OWL=y + select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON + default y + help + Say 'Y' here if you wish to use Actions Semiconductor S500/S900 UART + as the system console. + +config SERIAL_RDA + bool "RDA Micro serial port support" + depends on ARCH_RDA || COMPILE_TEST + select SERIAL_CORE + help + This driver is for RDA8810PL SoC's UART. + Say 'Y' here if you wish to use the on-board serial port. + Otherwise, say 'N'. + +config SERIAL_RDA_CONSOLE + bool "Console on RDA Micro serial port" + depends on SERIAL_RDA=y + select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON + default y + help + Say 'Y' here if you wish to use the RDA8810PL UART as the system + console. Only earlycon is implemented currently. + +config SERIAL_MILBEAUT_USIO + tristate "Milbeaut USIO/UART serial port support" + depends on ARCH_MILBEAUT || (COMPILE_TEST && OF) + default ARCH_MILBEAUT + select SERIAL_CORE + help + This selects the USIO/UART IP found in Socionext Milbeaut SoCs. + +config SERIAL_MILBEAUT_USIO_PORTS + int "Maximum number of CSIO/UART ports (1-8)" + range 1 8 + depends on SERIAL_MILBEAUT_USIO + default "4" + +config SERIAL_MILBEAUT_USIO_CONSOLE + bool "Support for console on MILBEAUT USIO/UART serial port" + depends on SERIAL_MILBEAUT_USIO=y + default y + select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON + help + Say 'Y' here if you wish to use a USIO/UART of Socionext Milbeaut + SoCs as the system console (the system console is the device which + receives all kernel messages and warnings and which allows logins in + single user mode). + +endmenu + +config SERIAL_MCTRL_GPIO + tristate diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile new file mode 100644 index 000000000..caf167f0c --- /dev/null +++ b/drivers/tty/serial/Makefile @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for the kernel serial device drivers. +# + +obj-$(CONFIG_SERIAL_CORE) += serial_core.o + +obj-$(CONFIG_SERIAL_EARLYCON) += earlycon.o +obj-$(CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST) += earlycon-arm-semihost.o +obj-$(CONFIG_SERIAL_EARLYCON_RISCV_SBI) += earlycon-riscv-sbi.o + +# These Sparc drivers have to appear before others such as 8250 +# which share ttySx minor node space. Otherwise console device +# names change and other unplesantries. +obj-$(CONFIG_SERIAL_SUNCORE) += suncore.o +obj-$(CONFIG_SERIAL_SUNHV) += sunhv.o +obj-$(CONFIG_SERIAL_SUNZILOG) += sunzilog.o +obj-$(CONFIG_SERIAL_SUNSU) += sunsu.o +obj-$(CONFIG_SERIAL_SUNSAB) += sunsab.o + +obj-$(CONFIG_SERIAL_21285) += 21285.o + +# Now bring in any enabled 8250/16450/16550 type drivers. +obj-$(CONFIG_SERIAL_8250) += 8250/ + +obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o +obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o +obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o +obj-$(CONFIG_SERIAL_PXA_NON8250) += pxa.o +obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o +obj-$(CONFIG_SERIAL_SA1100) += sa1100.o +obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o +obj-$(CONFIG_SERIAL_SAMSUNG) += samsung_tty.o +obj-$(CONFIG_SERIAL_MAX3100) += max3100.o +obj-$(CONFIG_SERIAL_MAX310X) += max310x.o +obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o +obj-$(CONFIG_SERIAL_MUX) += mux.o +obj-$(CONFIG_SERIAL_MCF) += mcf.o +obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o +obj-$(CONFIG_SERIAL_HS_LPC32XX) += lpc32xx_hs.o +obj-$(CONFIG_SERIAL_DZ) += dz.o +obj-$(CONFIG_SERIAL_ZS) += zs.o +obj-$(CONFIG_SERIAL_SH_SCI) += sh-sci.o +obj-$(CONFIG_SERIAL_CPM) += cpm_uart/ +obj-$(CONFIG_SERIAL_IMX) += imx.o +obj-$(CONFIG_SERIAL_IMX_EARLYCON) += imx_earlycon.o +obj-$(CONFIG_SERIAL_MPC52xx) += mpc52xx_uart.o +obj-$(CONFIG_SERIAL_ICOM) += icom.o +obj-$(CONFIG_SERIAL_MESON) += meson_uart.o +obj-$(CONFIG_SERIAL_SB1250_DUART) += sb1250-duart.o +obj-$(CONFIG_SERIAL_SCCNXP) += sccnxp.o +obj-$(CONFIG_SERIAL_SC16IS7XX_CORE) += sc16is7xx.o +obj-$(CONFIG_SERIAL_JSM) += jsm/ +obj-$(CONFIG_SERIAL_TXX9) += serial_txx9.o +obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o +obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o +obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o +obj-$(CONFIG_SERIAL_MSM) += msm_serial.o +obj-$(CONFIG_SERIAL_QCOM_GENI) += qcom_geni_serial.o +obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o +obj-$(CONFIG_SERIAL_ALTERA_UART) += altera_uart.o +obj-$(CONFIG_SERIAL_ST_ASC) += st-asc.o +obj-$(CONFIG_SERIAL_QE) += ucc_uart.o +obj-$(CONFIG_SERIAL_TIMBERDALE) += timbuart.o +obj-$(CONFIG_SERIAL_GRLIB_GAISLER_APBUART) += apbuart.o +obj-$(CONFIG_SERIAL_ALTERA_JTAGUART) += altera_jtaguart.o +obj-$(CONFIG_SERIAL_VT8500) += vt8500_serial.o +obj-$(CONFIG_SERIAL_IFX6X60) += ifx6x60.o +obj-$(CONFIG_SERIAL_PCH_UART) += pch_uart.o +obj-$(CONFIG_SERIAL_MXS_AUART) += mxs-auart.o +obj-$(CONFIG_SERIAL_LANTIQ) += lantiq.o +obj-$(CONFIG_SERIAL_XILINX_PS_UART) += xilinx_uartps.o +obj-$(CONFIG_SERIAL_SIRFSOC) += sirfsoc_uart.o +obj-$(CONFIG_SERIAL_TEGRA) += serial-tegra.o +obj-$(CONFIG_SERIAL_TEGRA_TCU) += tegra-tcu.o +obj-$(CONFIG_SERIAL_AR933X) += ar933x_uart.o +obj-$(CONFIG_SERIAL_EFM32_UART) += efm32-uart.o +obj-$(CONFIG_SERIAL_ARC) += arc_uart.o +obj-$(CONFIG_SERIAL_RP2) += rp2.o +obj-$(CONFIG_SERIAL_FSL_LPUART) += fsl_lpuart.o +obj-$(CONFIG_SERIAL_FSL_LINFLEXUART) += fsl_linflexuart.o +obj-$(CONFIG_SERIAL_CONEXANT_DIGICOLOR) += digicolor-usart.o +obj-$(CONFIG_SERIAL_MEN_Z135) += men_z135_uart.o +obj-$(CONFIG_SERIAL_SPRD) += sprd_serial.o +obj-$(CONFIG_SERIAL_STM32) += stm32-usart.o +obj-$(CONFIG_SERIAL_MVEBU_UART) += mvebu-uart.o +obj-$(CONFIG_SERIAL_PIC32) += pic32_uart.o +obj-$(CONFIG_SERIAL_MPS2_UART) += mps2-uart.o +obj-$(CONFIG_SERIAL_OWL) += owl-uart.o +obj-$(CONFIG_SERIAL_RDA) += rda-uart.o +obj-$(CONFIG_SERIAL_MILBEAUT_USIO) += milbeaut_usio.o +obj-$(CONFIG_SERIAL_SIFIVE) += sifive.o + +# GPIOLIB helpers for modem control lines +obj-$(CONFIG_SERIAL_MCTRL_GPIO) += serial_mctrl_gpio.o + +obj-$(CONFIG_SERIAL_KGDB_NMI) += kgdb_nmi.o +obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c new file mode 100644 index 000000000..d0ca9cf29 --- /dev/null +++ b/drivers/tty/serial/altera_jtaguart.c @@ -0,0 +1,525 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * altera_jtaguart.c -- Altera JTAG UART driver + * + * Based on mcf.c -- Freescale ColdFire UART driver + * + * (C) Copyright 2003-2007, Greg Ungerer + * (C) Copyright 2008, Thomas Chou + * (C) Copyright 2010, Tobias Klauser + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "altera_jtaguart" + +/* + * Altera JTAG UART register definitions according to the Altera JTAG UART + * datasheet: https://www.altera.com/literature/hb/nios2/n2cpu_nii51009.pdf + */ + +#define ALTERA_JTAGUART_SIZE 8 + +#define ALTERA_JTAGUART_DATA_REG 0 + +#define ALTERA_JTAGUART_DATA_DATA_MSK 0x000000FF +#define ALTERA_JTAGUART_DATA_RVALID_MSK 0x00008000 +#define ALTERA_JTAGUART_DATA_RAVAIL_MSK 0xFFFF0000 +#define ALTERA_JTAGUART_DATA_RAVAIL_OFF 16 + +#define ALTERA_JTAGUART_CONTROL_REG 4 + +#define ALTERA_JTAGUART_CONTROL_RE_MSK 0x00000001 +#define ALTERA_JTAGUART_CONTROL_WE_MSK 0x00000002 +#define ALTERA_JTAGUART_CONTROL_RI_MSK 0x00000100 +#define ALTERA_JTAGUART_CONTROL_RI_OFF 8 +#define ALTERA_JTAGUART_CONTROL_WI_MSK 0x00000200 +#define ALTERA_JTAGUART_CONTROL_AC_MSK 0x00000400 +#define ALTERA_JTAGUART_CONTROL_WSPACE_MSK 0xFFFF0000 +#define ALTERA_JTAGUART_CONTROL_WSPACE_OFF 16 + +/* + * Local per-uart structure. + */ +struct altera_jtaguart { + struct uart_port port; + unsigned int sigs; /* Local copy of line sigs */ + unsigned long imr; /* Local IMR mirror */ +}; + +static unsigned int altera_jtaguart_tx_empty(struct uart_port *port) +{ + return (readl(port->membase + ALTERA_JTAGUART_CONTROL_REG) & + ALTERA_JTAGUART_CONTROL_WSPACE_MSK) ? TIOCSER_TEMT : 0; +} + +static unsigned int altera_jtaguart_get_mctrl(struct uart_port *port) +{ + return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; +} + +static void altera_jtaguart_set_mctrl(struct uart_port *port, unsigned int sigs) +{ +} + +static void altera_jtaguart_start_tx(struct uart_port *port) +{ + struct altera_jtaguart *pp = + container_of(port, struct altera_jtaguart, port); + + pp->imr |= ALTERA_JTAGUART_CONTROL_WE_MSK; + writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG); +} + +static void altera_jtaguart_stop_tx(struct uart_port *port) +{ + struct altera_jtaguart *pp = + container_of(port, struct altera_jtaguart, port); + + pp->imr &= ~ALTERA_JTAGUART_CONTROL_WE_MSK; + writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG); +} + +static void altera_jtaguart_stop_rx(struct uart_port *port) +{ + struct altera_jtaguart *pp = + container_of(port, struct altera_jtaguart, port); + + pp->imr &= ~ALTERA_JTAGUART_CONTROL_RE_MSK; + writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG); +} + +static void altera_jtaguart_break_ctl(struct uart_port *port, int break_state) +{ +} + +static void altera_jtaguart_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + /* Just copy the old termios settings back */ + if (old) + tty_termios_copy_hw(termios, old); +} + +static void altera_jtaguart_rx_chars(struct altera_jtaguart *pp) +{ + struct uart_port *port = &pp->port; + unsigned char ch, flag; + unsigned long status; + + while ((status = readl(port->membase + ALTERA_JTAGUART_DATA_REG)) & + ALTERA_JTAGUART_DATA_RVALID_MSK) { + ch = status & ALTERA_JTAGUART_DATA_DATA_MSK; + flag = TTY_NORMAL; + port->icount.rx++; + + if (uart_handle_sysrq_char(port, ch)) + continue; + uart_insert_char(port, 0, 0, ch, flag); + } + + spin_unlock(&port->lock); + tty_flip_buffer_push(&port->state->port); + spin_lock(&port->lock); +} + +static void altera_jtaguart_tx_chars(struct altera_jtaguart *pp) +{ + struct uart_port *port = &pp->port; + struct circ_buf *xmit = &port->state->xmit; + unsigned int pending, count; + + if (port->x_char) { + /* Send special char - probably flow control */ + writel(port->x_char, port->membase + ALTERA_JTAGUART_DATA_REG); + port->x_char = 0; + port->icount.tx++; + return; + } + + pending = uart_circ_chars_pending(xmit); + if (pending > 0) { + count = (readl(port->membase + ALTERA_JTAGUART_CONTROL_REG) & + ALTERA_JTAGUART_CONTROL_WSPACE_MSK) >> + ALTERA_JTAGUART_CONTROL_WSPACE_OFF; + if (count > pending) + count = pending; + if (count > 0) { + pending -= count; + while (count--) { + writel(xmit->buf[xmit->tail], + port->membase + ALTERA_JTAGUART_DATA_REG); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + } + if (pending < WAKEUP_CHARS) + uart_write_wakeup(port); + } + } + + if (pending == 0) { + pp->imr &= ~ALTERA_JTAGUART_CONTROL_WE_MSK; + writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG); + } +} + +static irqreturn_t altera_jtaguart_interrupt(int irq, void *data) +{ + struct uart_port *port = data; + struct altera_jtaguart *pp = + container_of(port, struct altera_jtaguart, port); + unsigned int isr; + + isr = (readl(port->membase + ALTERA_JTAGUART_CONTROL_REG) >> + ALTERA_JTAGUART_CONTROL_RI_OFF) & pp->imr; + + spin_lock(&port->lock); + + if (isr & ALTERA_JTAGUART_CONTROL_RE_MSK) + altera_jtaguart_rx_chars(pp); + if (isr & ALTERA_JTAGUART_CONTROL_WE_MSK) + altera_jtaguart_tx_chars(pp); + + spin_unlock(&port->lock); + + return IRQ_RETVAL(isr); +} + +static void altera_jtaguart_config_port(struct uart_port *port, int flags) +{ + port->type = PORT_ALTERA_JTAGUART; + + /* Clear mask, so no surprise interrupts. */ + writel(0, port->membase + ALTERA_JTAGUART_CONTROL_REG); +} + +static int altera_jtaguart_startup(struct uart_port *port) +{ + struct altera_jtaguart *pp = + container_of(port, struct altera_jtaguart, port); + unsigned long flags; + int ret; + + ret = request_irq(port->irq, altera_jtaguart_interrupt, 0, + DRV_NAME, port); + if (ret) { + pr_err(DRV_NAME ": unable to attach Altera JTAG UART %d " + "interrupt vector=%d\n", port->line, port->irq); + return ret; + } + + spin_lock_irqsave(&port->lock, flags); + + /* Enable RX interrupts now */ + pp->imr = ALTERA_JTAGUART_CONTROL_RE_MSK; + writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG); + + spin_unlock_irqrestore(&port->lock, flags); + + return 0; +} + +static void altera_jtaguart_shutdown(struct uart_port *port) +{ + struct altera_jtaguart *pp = + container_of(port, struct altera_jtaguart, port); + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + /* Disable all interrupts now */ + pp->imr = 0; + writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG); + + spin_unlock_irqrestore(&port->lock, flags); + + free_irq(port->irq, port); +} + +static const char *altera_jtaguart_type(struct uart_port *port) +{ + return (port->type == PORT_ALTERA_JTAGUART) ? "Altera JTAG UART" : NULL; +} + +static int altera_jtaguart_request_port(struct uart_port *port) +{ + /* UARTs always present */ + return 0; +} + +static void altera_jtaguart_release_port(struct uart_port *port) +{ + /* Nothing to release... */ +} + +static int altera_jtaguart_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + if (ser->type != PORT_UNKNOWN && ser->type != PORT_ALTERA_JTAGUART) + return -EINVAL; + return 0; +} + +/* + * Define the basic serial functions we support. + */ +static const struct uart_ops altera_jtaguart_ops = { + .tx_empty = altera_jtaguart_tx_empty, + .get_mctrl = altera_jtaguart_get_mctrl, + .set_mctrl = altera_jtaguart_set_mctrl, + .start_tx = altera_jtaguart_start_tx, + .stop_tx = altera_jtaguart_stop_tx, + .stop_rx = altera_jtaguart_stop_rx, + .break_ctl = altera_jtaguart_break_ctl, + .startup = altera_jtaguart_startup, + .shutdown = altera_jtaguart_shutdown, + .set_termios = altera_jtaguart_set_termios, + .type = altera_jtaguart_type, + .request_port = altera_jtaguart_request_port, + .release_port = altera_jtaguart_release_port, + .config_port = altera_jtaguart_config_port, + .verify_port = altera_jtaguart_verify_port, +}; + +#define ALTERA_JTAGUART_MAXPORTS 1 +static struct altera_jtaguart altera_jtaguart_ports[ALTERA_JTAGUART_MAXPORTS]; + +#if defined(CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE) + +#if defined(CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS) +static void altera_jtaguart_console_putc(struct uart_port *port, int c) +{ + unsigned long status; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + while (((status = readl(port->membase + ALTERA_JTAGUART_CONTROL_REG)) & + ALTERA_JTAGUART_CONTROL_WSPACE_MSK) == 0) { + if ((status & ALTERA_JTAGUART_CONTROL_AC_MSK) == 0) { + spin_unlock_irqrestore(&port->lock, flags); + return; /* no connection activity */ + } + spin_unlock_irqrestore(&port->lock, flags); + cpu_relax(); + spin_lock_irqsave(&port->lock, flags); + } + writel(c, port->membase + ALTERA_JTAGUART_DATA_REG); + spin_unlock_irqrestore(&port->lock, flags); +} +#else +static void altera_jtaguart_console_putc(struct uart_port *port, int c) +{ + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + while ((readl(port->membase + ALTERA_JTAGUART_CONTROL_REG) & + ALTERA_JTAGUART_CONTROL_WSPACE_MSK) == 0) { + spin_unlock_irqrestore(&port->lock, flags); + cpu_relax(); + spin_lock_irqsave(&port->lock, flags); + } + writel(c, port->membase + ALTERA_JTAGUART_DATA_REG); + spin_unlock_irqrestore(&port->lock, flags); +} +#endif + +static void altera_jtaguart_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_port *port = &(altera_jtaguart_ports + co->index)->port; + + uart_console_write(port, s, count, altera_jtaguart_console_putc); +} + +static int __init altera_jtaguart_console_setup(struct console *co, + char *options) +{ + struct uart_port *port; + + if (co->index < 0 || co->index >= ALTERA_JTAGUART_MAXPORTS) + return -EINVAL; + port = &altera_jtaguart_ports[co->index].port; + if (port->membase == NULL) + return -ENODEV; + return 0; +} + +static struct uart_driver altera_jtaguart_driver; + +static struct console altera_jtaguart_console = { + .name = "ttyJ", + .write = altera_jtaguart_console_write, + .device = uart_console_device, + .setup = altera_jtaguart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &altera_jtaguart_driver, +}; + +static int __init altera_jtaguart_console_init(void) +{ + register_console(&altera_jtaguart_console); + return 0; +} + +console_initcall(altera_jtaguart_console_init); + +#define ALTERA_JTAGUART_CONSOLE (&altera_jtaguart_console) + +static void altera_jtaguart_earlycon_write(struct console *co, const char *s, + unsigned int count) +{ + struct earlycon_device *dev = co->data; + + uart_console_write(&dev->port, s, count, altera_jtaguart_console_putc); +} + +static int __init altera_jtaguart_earlycon_setup(struct earlycon_device *dev, + const char *options) +{ + if (!dev->port.membase) + return -ENODEV; + + dev->con->write = altera_jtaguart_earlycon_write; + return 0; +} + +OF_EARLYCON_DECLARE(juart, "altr,juart-1.0", altera_jtaguart_earlycon_setup); + +#else + +#define ALTERA_JTAGUART_CONSOLE NULL + +#endif /* CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE */ + +static struct uart_driver altera_jtaguart_driver = { + .owner = THIS_MODULE, + .driver_name = "altera_jtaguart", + .dev_name = "ttyJ", + .major = ALTERA_JTAGUART_MAJOR, + .minor = ALTERA_JTAGUART_MINOR, + .nr = ALTERA_JTAGUART_MAXPORTS, + .cons = ALTERA_JTAGUART_CONSOLE, +}; + +static int altera_jtaguart_probe(struct platform_device *pdev) +{ + struct altera_jtaguart_platform_uart *platp = + dev_get_platdata(&pdev->dev); + struct uart_port *port; + struct resource *res_irq, *res_mem; + int i = pdev->id; + + /* -1 emphasizes that the platform must have one port, no .N suffix */ + if (i == -1) + i = 0; + + if (i >= ALTERA_JTAGUART_MAXPORTS) + return -EINVAL; + + port = &altera_jtaguart_ports[i].port; + + res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res_mem) + port->mapbase = res_mem->start; + else if (platp) + port->mapbase = platp->mapbase; + else + return -ENODEV; + + res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (res_irq) + port->irq = res_irq->start; + else if (platp) + port->irq = platp->irq; + else + return -ENODEV; + + port->membase = ioremap(port->mapbase, ALTERA_JTAGUART_SIZE); + if (!port->membase) + return -ENOMEM; + + port->line = i; + port->type = PORT_ALTERA_JTAGUART; + port->iotype = SERIAL_IO_MEM; + port->ops = &altera_jtaguart_ops; + port->flags = UPF_BOOT_AUTOCONF; + port->dev = &pdev->dev; + + uart_add_one_port(&altera_jtaguart_driver, port); + + return 0; +} + +static int altera_jtaguart_remove(struct platform_device *pdev) +{ + struct uart_port *port; + int i = pdev->id; + + if (i == -1) + i = 0; + + port = &altera_jtaguart_ports[i].port; + uart_remove_one_port(&altera_jtaguart_driver, port); + iounmap(port->membase); + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id altera_jtaguart_match[] = { + { .compatible = "ALTR,juart-1.0", }, + { .compatible = "altr,juart-1.0", }, + {}, +}; +MODULE_DEVICE_TABLE(of, altera_jtaguart_match); +#endif /* CONFIG_OF */ + +static struct platform_driver altera_jtaguart_platform_driver = { + .probe = altera_jtaguart_probe, + .remove = altera_jtaguart_remove, + .driver = { + .name = DRV_NAME, + .of_match_table = of_match_ptr(altera_jtaguart_match), + }, +}; + +static int __init altera_jtaguart_init(void) +{ + int rc; + + rc = uart_register_driver(&altera_jtaguart_driver); + if (rc) + return rc; + rc = platform_driver_register(&altera_jtaguart_platform_driver); + if (rc) + uart_unregister_driver(&altera_jtaguart_driver); + return rc; +} + +static void __exit altera_jtaguart_exit(void) +{ + platform_driver_unregister(&altera_jtaguart_platform_driver); + uart_unregister_driver(&altera_jtaguart_driver); +} + +module_init(altera_jtaguart_init); +module_exit(altera_jtaguart_exit); + +MODULE_DESCRIPTION("Altera JTAG UART driver"); +MODULE_AUTHOR("Thomas Chou "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c new file mode 100644 index 000000000..d91f76b1d --- /dev/null +++ b/drivers/tty/serial/altera_uart.c @@ -0,0 +1,675 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * altera_uart.c -- Altera UART driver + * + * Based on mcf.c -- Freescale ColdFire UART driver + * + * (C) Copyright 2003-2007, Greg Ungerer + * (C) Copyright 2008, Thomas Chou + * (C) Copyright 2010, Tobias Klauser + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "altera_uart" +#define SERIAL_ALTERA_MAJOR 204 +#define SERIAL_ALTERA_MINOR 213 + +/* + * Altera UART register definitions according to the Nios UART datasheet: + * http://www.altera.com/literature/ds/ds_nios_uart.pdf + */ + +#define ALTERA_UART_SIZE 32 + +#define ALTERA_UART_RXDATA_REG 0 +#define ALTERA_UART_TXDATA_REG 4 +#define ALTERA_UART_STATUS_REG 8 +#define ALTERA_UART_CONTROL_REG 12 +#define ALTERA_UART_DIVISOR_REG 16 +#define ALTERA_UART_EOP_REG 20 + +#define ALTERA_UART_STATUS_PE_MSK 0x0001 /* parity error */ +#define ALTERA_UART_STATUS_FE_MSK 0x0002 /* framing error */ +#define ALTERA_UART_STATUS_BRK_MSK 0x0004 /* break */ +#define ALTERA_UART_STATUS_ROE_MSK 0x0008 /* RX overrun error */ +#define ALTERA_UART_STATUS_TOE_MSK 0x0010 /* TX overrun error */ +#define ALTERA_UART_STATUS_TMT_MSK 0x0020 /* TX shift register state */ +#define ALTERA_UART_STATUS_TRDY_MSK 0x0040 /* TX ready */ +#define ALTERA_UART_STATUS_RRDY_MSK 0x0080 /* RX ready */ +#define ALTERA_UART_STATUS_E_MSK 0x0100 /* exception condition */ +#define ALTERA_UART_STATUS_DCTS_MSK 0x0400 /* CTS logic-level change */ +#define ALTERA_UART_STATUS_CTS_MSK 0x0800 /* CTS logic state */ +#define ALTERA_UART_STATUS_EOP_MSK 0x1000 /* EOP written/read */ + + /* Enable interrupt on... */ +#define ALTERA_UART_CONTROL_PE_MSK 0x0001 /* ...parity error */ +#define ALTERA_UART_CONTROL_FE_MSK 0x0002 /* ...framing error */ +#define ALTERA_UART_CONTROL_BRK_MSK 0x0004 /* ...break */ +#define ALTERA_UART_CONTROL_ROE_MSK 0x0008 /* ...RX overrun */ +#define ALTERA_UART_CONTROL_TOE_MSK 0x0010 /* ...TX overrun */ +#define ALTERA_UART_CONTROL_TMT_MSK 0x0020 /* ...TX shift register empty */ +#define ALTERA_UART_CONTROL_TRDY_MSK 0x0040 /* ...TX ready */ +#define ALTERA_UART_CONTROL_RRDY_MSK 0x0080 /* ...RX ready */ +#define ALTERA_UART_CONTROL_E_MSK 0x0100 /* ...exception*/ + +#define ALTERA_UART_CONTROL_TRBK_MSK 0x0200 /* TX break */ +#define ALTERA_UART_CONTROL_DCTS_MSK 0x0400 /* Interrupt on CTS change */ +#define ALTERA_UART_CONTROL_RTS_MSK 0x0800 /* RTS signal */ +#define ALTERA_UART_CONTROL_EOP_MSK 0x1000 /* Interrupt on EOP */ + +/* + * Local per-uart structure. + */ +struct altera_uart { + struct uart_port port; + struct timer_list tmr; + unsigned int sigs; /* Local copy of line sigs */ + unsigned short imr; /* Local IMR mirror */ +}; + +static u32 altera_uart_readl(struct uart_port *port, int reg) +{ + return readl(port->membase + (reg << port->regshift)); +} + +static void altera_uart_writel(struct uart_port *port, u32 dat, int reg) +{ + writel(dat, port->membase + (reg << port->regshift)); +} + +static unsigned int altera_uart_tx_empty(struct uart_port *port) +{ + return (altera_uart_readl(port, ALTERA_UART_STATUS_REG) & + ALTERA_UART_STATUS_TMT_MSK) ? TIOCSER_TEMT : 0; +} + +static unsigned int altera_uart_get_mctrl(struct uart_port *port) +{ + struct altera_uart *pp = container_of(port, struct altera_uart, port); + unsigned int sigs; + + sigs = (altera_uart_readl(port, ALTERA_UART_STATUS_REG) & + ALTERA_UART_STATUS_CTS_MSK) ? TIOCM_CTS : 0; + sigs |= (pp->sigs & TIOCM_RTS); + + return sigs; +} + +static void altera_uart_update_ctrl_reg(struct altera_uart *pp) +{ + unsigned short imr = pp->imr; + + /* + * If the device doesn't have an irq, ensure that the irq bits are + * masked out to keep the irq line inactive. + */ + if (!pp->port.irq) + imr &= ALTERA_UART_CONTROL_TRBK_MSK | ALTERA_UART_CONTROL_RTS_MSK; + + altera_uart_writel(&pp->port, imr, ALTERA_UART_CONTROL_REG); +} + +static void altera_uart_set_mctrl(struct uart_port *port, unsigned int sigs) +{ + struct altera_uart *pp = container_of(port, struct altera_uart, port); + + pp->sigs = sigs; + if (sigs & TIOCM_RTS) + pp->imr |= ALTERA_UART_CONTROL_RTS_MSK; + else + pp->imr &= ~ALTERA_UART_CONTROL_RTS_MSK; + altera_uart_update_ctrl_reg(pp); +} + +static void altera_uart_start_tx(struct uart_port *port) +{ + struct altera_uart *pp = container_of(port, struct altera_uart, port); + + pp->imr |= ALTERA_UART_CONTROL_TRDY_MSK; + altera_uart_update_ctrl_reg(pp); +} + +static void altera_uart_stop_tx(struct uart_port *port) +{ + struct altera_uart *pp = container_of(port, struct altera_uart, port); + + pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK; + altera_uart_update_ctrl_reg(pp); +} + +static void altera_uart_stop_rx(struct uart_port *port) +{ + struct altera_uart *pp = container_of(port, struct altera_uart, port); + + pp->imr &= ~ALTERA_UART_CONTROL_RRDY_MSK; + altera_uart_update_ctrl_reg(pp); +} + +static void altera_uart_break_ctl(struct uart_port *port, int break_state) +{ + struct altera_uart *pp = container_of(port, struct altera_uart, port); + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + if (break_state == -1) + pp->imr |= ALTERA_UART_CONTROL_TRBK_MSK; + else + pp->imr &= ~ALTERA_UART_CONTROL_TRBK_MSK; + altera_uart_update_ctrl_reg(pp); + spin_unlock_irqrestore(&port->lock, flags); +} + +static void altera_uart_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + unsigned long flags; + unsigned int baud, baudclk; + + baud = uart_get_baud_rate(port, termios, old, 0, 4000000); + baudclk = port->uartclk / baud; + + if (old) + tty_termios_copy_hw(termios, old); + tty_termios_encode_baud_rate(termios, baud, baud); + + spin_lock_irqsave(&port->lock, flags); + uart_update_timeout(port, termios->c_cflag, baud); + altera_uart_writel(port, baudclk, ALTERA_UART_DIVISOR_REG); + spin_unlock_irqrestore(&port->lock, flags); + + /* + * FIXME: port->read_status_mask and port->ignore_status_mask + * need to be initialized based on termios settings for + * INPCK, IGNBRK, IGNPAR, PARMRK, BRKINT + */ +} + +static void altera_uart_rx_chars(struct uart_port *port) +{ + unsigned char ch, flag; + unsigned short status; + + while ((status = altera_uart_readl(port, ALTERA_UART_STATUS_REG)) & + ALTERA_UART_STATUS_RRDY_MSK) { + ch = altera_uart_readl(port, ALTERA_UART_RXDATA_REG); + flag = TTY_NORMAL; + port->icount.rx++; + + if (status & ALTERA_UART_STATUS_E_MSK) { + altera_uart_writel(port, status, + ALTERA_UART_STATUS_REG); + + if (status & ALTERA_UART_STATUS_BRK_MSK) { + port->icount.brk++; + if (uart_handle_break(port)) + continue; + } else if (status & ALTERA_UART_STATUS_PE_MSK) { + port->icount.parity++; + } else if (status & ALTERA_UART_STATUS_ROE_MSK) { + port->icount.overrun++; + } else if (status & ALTERA_UART_STATUS_FE_MSK) { + port->icount.frame++; + } + + status &= port->read_status_mask; + + if (status & ALTERA_UART_STATUS_BRK_MSK) + flag = TTY_BREAK; + else if (status & ALTERA_UART_STATUS_PE_MSK) + flag = TTY_PARITY; + else if (status & ALTERA_UART_STATUS_FE_MSK) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(port, ch)) + continue; + uart_insert_char(port, status, ALTERA_UART_STATUS_ROE_MSK, ch, + flag); + } + + spin_unlock(&port->lock); + tty_flip_buffer_push(&port->state->port); + spin_lock(&port->lock); +} + +static void altera_uart_tx_chars(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + + if (port->x_char) { + /* Send special char - probably flow control */ + altera_uart_writel(port, port->x_char, ALTERA_UART_TXDATA_REG); + port->x_char = 0; + port->icount.tx++; + return; + } + + while (altera_uart_readl(port, ALTERA_UART_STATUS_REG) & + ALTERA_UART_STATUS_TRDY_MSK) { + if (xmit->head == xmit->tail) + break; + altera_uart_writel(port, xmit->buf[xmit->tail], + ALTERA_UART_TXDATA_REG); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + altera_uart_stop_tx(port); +} + +static irqreturn_t altera_uart_interrupt(int irq, void *data) +{ + struct uart_port *port = data; + struct altera_uart *pp = container_of(port, struct altera_uart, port); + unsigned long flags; + unsigned int isr; + + isr = altera_uart_readl(port, ALTERA_UART_STATUS_REG) & pp->imr; + + spin_lock_irqsave(&port->lock, flags); + if (isr & ALTERA_UART_STATUS_RRDY_MSK) + altera_uart_rx_chars(port); + if (isr & ALTERA_UART_STATUS_TRDY_MSK) + altera_uart_tx_chars(port); + spin_unlock_irqrestore(&port->lock, flags); + + return IRQ_RETVAL(isr); +} + +static void altera_uart_timer(struct timer_list *t) +{ + struct altera_uart *pp = from_timer(pp, t, tmr); + struct uart_port *port = &pp->port; + + altera_uart_interrupt(0, port); + mod_timer(&pp->tmr, jiffies + uart_poll_timeout(port)); +} + +static void altera_uart_config_port(struct uart_port *port, int flags) +{ + port->type = PORT_ALTERA_UART; + + /* Clear mask, so no surprise interrupts. */ + altera_uart_writel(port, 0, ALTERA_UART_CONTROL_REG); + /* Clear status register */ + altera_uart_writel(port, 0, ALTERA_UART_STATUS_REG); +} + +static int altera_uart_startup(struct uart_port *port) +{ + struct altera_uart *pp = container_of(port, struct altera_uart, port); + unsigned long flags; + + if (!port->irq) { + timer_setup(&pp->tmr, altera_uart_timer, 0); + mod_timer(&pp->tmr, jiffies + uart_poll_timeout(port)); + } else { + int ret; + + ret = request_irq(port->irq, altera_uart_interrupt, 0, + DRV_NAME, port); + if (ret) { + pr_err(DRV_NAME ": unable to attach Altera UART %d " + "interrupt vector=%d\n", port->line, port->irq); + return ret; + } + } + + spin_lock_irqsave(&port->lock, flags); + + /* Enable RX interrupts now */ + pp->imr = ALTERA_UART_CONTROL_RRDY_MSK; + altera_uart_update_ctrl_reg(pp); + + spin_unlock_irqrestore(&port->lock, flags); + + return 0; +} + +static void altera_uart_shutdown(struct uart_port *port) +{ + struct altera_uart *pp = container_of(port, struct altera_uart, port); + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + /* Disable all interrupts now */ + pp->imr = 0; + altera_uart_update_ctrl_reg(pp); + + spin_unlock_irqrestore(&port->lock, flags); + + if (port->irq) + free_irq(port->irq, port); + else + del_timer_sync(&pp->tmr); +} + +static const char *altera_uart_type(struct uart_port *port) +{ + return (port->type == PORT_ALTERA_UART) ? "Altera UART" : NULL; +} + +static int altera_uart_request_port(struct uart_port *port) +{ + /* UARTs always present */ + return 0; +} + +static void altera_uart_release_port(struct uart_port *port) +{ + /* Nothing to release... */ +} + +static int altera_uart_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + if ((ser->type != PORT_UNKNOWN) && (ser->type != PORT_ALTERA_UART)) + return -EINVAL; + return 0; +} + +#ifdef CONFIG_CONSOLE_POLL +static int altera_uart_poll_get_char(struct uart_port *port) +{ + while (!(altera_uart_readl(port, ALTERA_UART_STATUS_REG) & + ALTERA_UART_STATUS_RRDY_MSK)) + cpu_relax(); + + return altera_uart_readl(port, ALTERA_UART_RXDATA_REG); +} + +static void altera_uart_poll_put_char(struct uart_port *port, unsigned char c) +{ + while (!(altera_uart_readl(port, ALTERA_UART_STATUS_REG) & + ALTERA_UART_STATUS_TRDY_MSK)) + cpu_relax(); + + altera_uart_writel(port, c, ALTERA_UART_TXDATA_REG); +} +#endif + +/* + * Define the basic serial functions we support. + */ +static const struct uart_ops altera_uart_ops = { + .tx_empty = altera_uart_tx_empty, + .get_mctrl = altera_uart_get_mctrl, + .set_mctrl = altera_uart_set_mctrl, + .start_tx = altera_uart_start_tx, + .stop_tx = altera_uart_stop_tx, + .stop_rx = altera_uart_stop_rx, + .break_ctl = altera_uart_break_ctl, + .startup = altera_uart_startup, + .shutdown = altera_uart_shutdown, + .set_termios = altera_uart_set_termios, + .type = altera_uart_type, + .request_port = altera_uart_request_port, + .release_port = altera_uart_release_port, + .config_port = altera_uart_config_port, + .verify_port = altera_uart_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = altera_uart_poll_get_char, + .poll_put_char = altera_uart_poll_put_char, +#endif +}; + +static struct altera_uart altera_uart_ports[CONFIG_SERIAL_ALTERA_UART_MAXPORTS]; + +#if defined(CONFIG_SERIAL_ALTERA_UART_CONSOLE) + +static void altera_uart_console_putc(struct uart_port *port, int c) +{ + while (!(altera_uart_readl(port, ALTERA_UART_STATUS_REG) & + ALTERA_UART_STATUS_TRDY_MSK)) + cpu_relax(); + + altera_uart_writel(port, c, ALTERA_UART_TXDATA_REG); +} + +static void altera_uart_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_port *port = &(altera_uart_ports + co->index)->port; + + uart_console_write(port, s, count, altera_uart_console_putc); +} + +static int __init altera_uart_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = CONFIG_SERIAL_ALTERA_UART_BAUDRATE; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index < 0 || co->index >= CONFIG_SERIAL_ALTERA_UART_MAXPORTS) + return -EINVAL; + port = &altera_uart_ports[co->index].port; + if (!port->membase) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver altera_uart_driver; + +static struct console altera_uart_console = { + .name = "ttyAL", + .write = altera_uart_console_write, + .device = uart_console_device, + .setup = altera_uart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &altera_uart_driver, +}; + +static int __init altera_uart_console_init(void) +{ + register_console(&altera_uart_console); + return 0; +} + +console_initcall(altera_uart_console_init); + +#define ALTERA_UART_CONSOLE (&altera_uart_console) + +static void altera_uart_earlycon_write(struct console *co, const char *s, + unsigned int count) +{ + struct earlycon_device *dev = co->data; + + uart_console_write(&dev->port, s, count, altera_uart_console_putc); +} + +static int __init altera_uart_earlycon_setup(struct earlycon_device *dev, + const char *options) +{ + struct uart_port *port = &dev->port; + + if (!port->membase) + return -ENODEV; + + /* Enable RX interrupts now */ + altera_uart_writel(port, ALTERA_UART_CONTROL_RRDY_MSK, + ALTERA_UART_CONTROL_REG); + + if (dev->baud) { + unsigned int baudclk = port->uartclk / dev->baud; + + altera_uart_writel(port, baudclk, ALTERA_UART_DIVISOR_REG); + } + + dev->con->write = altera_uart_earlycon_write; + return 0; +} + +OF_EARLYCON_DECLARE(uart, "altr,uart-1.0", altera_uart_earlycon_setup); + +#else + +#define ALTERA_UART_CONSOLE NULL + +#endif /* CONFIG_SERIAL_ALTERA_UART_CONSOLE */ + +/* + * Define the altera_uart UART driver structure. + */ +static struct uart_driver altera_uart_driver = { + .owner = THIS_MODULE, + .driver_name = DRV_NAME, + .dev_name = "ttyAL", + .major = SERIAL_ALTERA_MAJOR, + .minor = SERIAL_ALTERA_MINOR, + .nr = CONFIG_SERIAL_ALTERA_UART_MAXPORTS, + .cons = ALTERA_UART_CONSOLE, +}; + +static int altera_uart_probe(struct platform_device *pdev) +{ + struct altera_uart_platform_uart *platp = dev_get_platdata(&pdev->dev); + struct uart_port *port; + struct resource *res_mem; + struct resource *res_irq; + int i = pdev->id; + int ret; + + /* if id is -1 scan for a free id and use that one */ + if (i == -1) { + for (i = 0; i < CONFIG_SERIAL_ALTERA_UART_MAXPORTS; i++) + if (altera_uart_ports[i].port.mapbase == 0) + break; + } + + if (i < 0 || i >= CONFIG_SERIAL_ALTERA_UART_MAXPORTS) + return -EINVAL; + + port = &altera_uart_ports[i].port; + + res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res_mem) + port->mapbase = res_mem->start; + else if (platp) + port->mapbase = platp->mapbase; + else + return -EINVAL; + + res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (res_irq) + port->irq = res_irq->start; + else if (platp) + port->irq = platp->irq; + + /* Check platform data first so we can override device node data */ + if (platp) + port->uartclk = platp->uartclk; + else { + ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency", + &port->uartclk); + if (ret) + return ret; + } + + port->membase = ioremap(port->mapbase, ALTERA_UART_SIZE); + if (!port->membase) + return -ENOMEM; + + if (platp) + port->regshift = platp->bus_shift; + else + port->regshift = 0; + + port->line = i; + port->type = PORT_ALTERA_UART; + port->iotype = SERIAL_IO_MEM; + port->ops = &altera_uart_ops; + port->flags = UPF_BOOT_AUTOCONF; + port->dev = &pdev->dev; + + platform_set_drvdata(pdev, port); + + uart_add_one_port(&altera_uart_driver, port); + + return 0; +} + +static int altera_uart_remove(struct platform_device *pdev) +{ + struct uart_port *port = platform_get_drvdata(pdev); + + if (port) { + uart_remove_one_port(&altera_uart_driver, port); + port->mapbase = 0; + iounmap(port->membase); + } + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id altera_uart_match[] = { + { .compatible = "ALTR,uart-1.0", }, + { .compatible = "altr,uart-1.0", }, + {}, +}; +MODULE_DEVICE_TABLE(of, altera_uart_match); +#endif /* CONFIG_OF */ + +static struct platform_driver altera_uart_platform_driver = { + .probe = altera_uart_probe, + .remove = altera_uart_remove, + .driver = { + .name = DRV_NAME, + .of_match_table = of_match_ptr(altera_uart_match), + }, +}; + +static int __init altera_uart_init(void) +{ + int rc; + + rc = uart_register_driver(&altera_uart_driver); + if (rc) + return rc; + rc = platform_driver_register(&altera_uart_platform_driver); + if (rc) + uart_unregister_driver(&altera_uart_driver); + return rc; +} + +static void __exit altera_uart_exit(void) +{ + platform_driver_unregister(&altera_uart_platform_driver); + uart_unregister_driver(&altera_uart_driver); +} + +module_init(altera_uart_init); +module_exit(altera_uart_exit); + +MODULE_DESCRIPTION("Altera UART driver"); +MODULE_AUTHOR("Thomas Chou "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); +MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_ALTERA_MAJOR); diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c new file mode 100644 index 000000000..e538d6d75 --- /dev/null +++ b/drivers/tty/serial/amba-pl010.c @@ -0,0 +1,833 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver for AMBA serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright 1999 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * + * This is a generic driver for ARM AMBA-type serial ports. They + * have a lot of 16550-like features, but are not register compatible. + * Note that although they do have CTS, DCD and DSR inputs, they do + * not have an RI input, nor do they have DTR or RTS outputs. If + * required, these have to be supplied via some other means (eg, GPIO) + * and hooked into this driver. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define UART_NR 8 + +#define SERIAL_AMBA_MAJOR 204 +#define SERIAL_AMBA_MINOR 16 +#define SERIAL_AMBA_NR UART_NR + +#define AMBA_ISR_PASS_LIMIT 256 + +#define UART_RX_DATA(s) (((s) & UART01x_FR_RXFE) == 0) +#define UART_TX_READY(s) (((s) & UART01x_FR_TXFF) == 0) + +#define UART_DUMMY_RSR_RX 256 +#define UART_PORT_SIZE 64 + +/* + * We wrap our port structure around the generic uart_port. + */ +struct uart_amba_port { + struct uart_port port; + struct clk *clk; + struct amba_device *dev; + struct amba_pl010_data *data; + unsigned int old_status; +}; + +static void pl010_stop_tx(struct uart_port *port) +{ + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); + unsigned int cr; + + cr = readb(uap->port.membase + UART010_CR); + cr &= ~UART010_CR_TIE; + writel(cr, uap->port.membase + UART010_CR); +} + +static void pl010_start_tx(struct uart_port *port) +{ + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); + unsigned int cr; + + cr = readb(uap->port.membase + UART010_CR); + cr |= UART010_CR_TIE; + writel(cr, uap->port.membase + UART010_CR); +} + +static void pl010_stop_rx(struct uart_port *port) +{ + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); + unsigned int cr; + + cr = readb(uap->port.membase + UART010_CR); + cr &= ~(UART010_CR_RIE | UART010_CR_RTIE); + writel(cr, uap->port.membase + UART010_CR); +} + +static void pl010_disable_ms(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int cr; + + cr = readb(uap->port.membase + UART010_CR); + cr &= ~UART010_CR_MSIE; + writel(cr, uap->port.membase + UART010_CR); +} + +static void pl010_enable_ms(struct uart_port *port) +{ + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); + unsigned int cr; + + cr = readb(uap->port.membase + UART010_CR); + cr |= UART010_CR_MSIE; + writel(cr, uap->port.membase + UART010_CR); +} + +static void pl010_rx_chars(struct uart_amba_port *uap) +{ + unsigned int status, ch, flag, rsr, max_count = 256; + + status = readb(uap->port.membase + UART01x_FR); + while (UART_RX_DATA(status) && max_count--) { + ch = readb(uap->port.membase + UART01x_DR); + flag = TTY_NORMAL; + + uap->port.icount.rx++; + + /* + * Note that the error handling code is + * out of the main execution path + */ + rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX; + if (unlikely(rsr & UART01x_RSR_ANY)) { + writel(0, uap->port.membase + UART01x_ECR); + + if (rsr & UART01x_RSR_BE) { + rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE); + uap->port.icount.brk++; + if (uart_handle_break(&uap->port)) + goto ignore_char; + } else if (rsr & UART01x_RSR_PE) + uap->port.icount.parity++; + else if (rsr & UART01x_RSR_FE) + uap->port.icount.frame++; + if (rsr & UART01x_RSR_OE) + uap->port.icount.overrun++; + + rsr &= uap->port.read_status_mask; + + if (rsr & UART01x_RSR_BE) + flag = TTY_BREAK; + else if (rsr & UART01x_RSR_PE) + flag = TTY_PARITY; + else if (rsr & UART01x_RSR_FE) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(&uap->port, ch)) + goto ignore_char; + + uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag); + + ignore_char: + status = readb(uap->port.membase + UART01x_FR); + } + spin_unlock(&uap->port.lock); + tty_flip_buffer_push(&uap->port.state->port); + spin_lock(&uap->port.lock); +} + +static void pl010_tx_chars(struct uart_amba_port *uap) +{ + struct circ_buf *xmit = &uap->port.state->xmit; + int count; + + if (uap->port.x_char) { + writel(uap->port.x_char, uap->port.membase + UART01x_DR); + uap->port.icount.tx++; + uap->port.x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(&uap->port)) { + pl010_stop_tx(&uap->port); + return; + } + + count = uap->port.fifosize >> 1; + do { + writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + uap->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&uap->port); + + if (uart_circ_empty(xmit)) + pl010_stop_tx(&uap->port); +} + +static void pl010_modem_status(struct uart_amba_port *uap) +{ + unsigned int status, delta; + + writel(0, uap->port.membase + UART010_ICR); + + status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; + + delta = status ^ uap->old_status; + uap->old_status = status; + + if (!delta) + return; + + if (delta & UART01x_FR_DCD) + uart_handle_dcd_change(&uap->port, status & UART01x_FR_DCD); + + if (delta & UART01x_FR_DSR) + uap->port.icount.dsr++; + + if (delta & UART01x_FR_CTS) + uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS); + + wake_up_interruptible(&uap->port.state->port.delta_msr_wait); +} + +static irqreturn_t pl010_int(int irq, void *dev_id) +{ + struct uart_amba_port *uap = dev_id; + unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT; + int handled = 0; + + spin_lock(&uap->port.lock); + + status = readb(uap->port.membase + UART010_IIR); + if (status) { + do { + if (status & (UART010_IIR_RTIS | UART010_IIR_RIS)) + pl010_rx_chars(uap); + if (status & UART010_IIR_MIS) + pl010_modem_status(uap); + if (status & UART010_IIR_TIS) + pl010_tx_chars(uap); + + if (pass_counter-- == 0) + break; + + status = readb(uap->port.membase + UART010_IIR); + } while (status & (UART010_IIR_RTIS | UART010_IIR_RIS | + UART010_IIR_TIS)); + handled = 1; + } + + spin_unlock(&uap->port.lock); + + return IRQ_RETVAL(handled); +} + +static unsigned int pl010_tx_empty(struct uart_port *port) +{ + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); + unsigned int status = readb(uap->port.membase + UART01x_FR); + return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT; +} + +static unsigned int pl010_get_mctrl(struct uart_port *port) +{ + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); + unsigned int result = 0; + unsigned int status; + + status = readb(uap->port.membase + UART01x_FR); + if (status & UART01x_FR_DCD) + result |= TIOCM_CAR; + if (status & UART01x_FR_DSR) + result |= TIOCM_DSR; + if (status & UART01x_FR_CTS) + result |= TIOCM_CTS; + + return result; +} + +static void pl010_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); + + if (uap->data) + uap->data->set_mctrl(uap->dev, uap->port.membase, mctrl); +} + +static void pl010_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); + unsigned long flags; + unsigned int lcr_h; + + spin_lock_irqsave(&uap->port.lock, flags); + lcr_h = readb(uap->port.membase + UART010_LCRH); + if (break_state == -1) + lcr_h |= UART01x_LCRH_BRK; + else + lcr_h &= ~UART01x_LCRH_BRK; + writel(lcr_h, uap->port.membase + UART010_LCRH); + spin_unlock_irqrestore(&uap->port.lock, flags); +} + +static int pl010_startup(struct uart_port *port) +{ + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); + int retval; + + /* + * Try to enable the clock producer. + */ + retval = clk_prepare_enable(uap->clk); + if (retval) + goto out; + + uap->port.uartclk = clk_get_rate(uap->clk); + + /* + * Allocate the IRQ + */ + retval = request_irq(uap->port.irq, pl010_int, 0, "uart-pl010", uap); + if (retval) + goto clk_dis; + + /* + * initialise the old status of the modem signals + */ + uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; + + /* + * Finally, enable interrupts + */ + writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE, + uap->port.membase + UART010_CR); + + return 0; + + clk_dis: + clk_disable_unprepare(uap->clk); + out: + return retval; +} + +static void pl010_shutdown(struct uart_port *port) +{ + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); + + /* + * Free the interrupt + */ + free_irq(uap->port.irq, uap); + + /* + * disable all interrupts, disable the port + */ + writel(0, uap->port.membase + UART010_CR); + + /* disable break condition and fifos */ + writel(readb(uap->port.membase + UART010_LCRH) & + ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN), + uap->port.membase + UART010_LCRH); + + /* + * Shut down the clock producer + */ + clk_disable_unprepare(uap->clk); +} + +static void +pl010_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); + unsigned int lcr_h, old_cr; + unsigned long flags; + unsigned int baud, quot; + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16); + quot = uart_get_divisor(port, baud); + + switch (termios->c_cflag & CSIZE) { + case CS5: + lcr_h = UART01x_LCRH_WLEN_5; + break; + case CS6: + lcr_h = UART01x_LCRH_WLEN_6; + break; + case CS7: + lcr_h = UART01x_LCRH_WLEN_7; + break; + default: // CS8 + lcr_h = UART01x_LCRH_WLEN_8; + break; + } + if (termios->c_cflag & CSTOPB) + lcr_h |= UART01x_LCRH_STP2; + if (termios->c_cflag & PARENB) { + lcr_h |= UART01x_LCRH_PEN; + if (!(termios->c_cflag & PARODD)) + lcr_h |= UART01x_LCRH_EPS; + } + if (uap->port.fifosize > 1) + lcr_h |= UART01x_LCRH_FEN; + + spin_lock_irqsave(&uap->port.lock, flags); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + uap->port.read_status_mask = UART01x_RSR_OE; + if (termios->c_iflag & INPCK) + uap->port.read_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE; + if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) + uap->port.read_status_mask |= UART01x_RSR_BE; + + /* + * Characters to ignore + */ + uap->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + uap->port.ignore_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE; + if (termios->c_iflag & IGNBRK) { + uap->port.ignore_status_mask |= UART01x_RSR_BE; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + uap->port.ignore_status_mask |= UART01x_RSR_OE; + } + + /* + * Ignore all characters if CREAD is not set. + */ + if ((termios->c_cflag & CREAD) == 0) + uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX; + + old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE; + + if (UART_ENABLE_MS(port, termios->c_cflag)) + old_cr |= UART010_CR_MSIE; + + /* Set baud rate */ + quot -= 1; + writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM); + writel(quot & 0xff, uap->port.membase + UART010_LCRL); + + /* + * ----------v----------v----------v----------v----- + * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L + * ----------^----------^----------^----------^----- + */ + writel(lcr_h, uap->port.membase + UART010_LCRH); + writel(old_cr, uap->port.membase + UART010_CR); + + spin_unlock_irqrestore(&uap->port.lock, flags); +} + +static void pl010_set_ldisc(struct uart_port *port, struct ktermios *termios) +{ + if (termios->c_line == N_PPS) { + port->flags |= UPF_HARDPPS_CD; + spin_lock_irq(&port->lock); + pl010_enable_ms(port); + spin_unlock_irq(&port->lock); + } else { + port->flags &= ~UPF_HARDPPS_CD; + if (!UART_ENABLE_MS(port, termios->c_cflag)) { + spin_lock_irq(&port->lock); + pl010_disable_ms(port); + spin_unlock_irq(&port->lock); + } + } +} + +static const char *pl010_type(struct uart_port *port) +{ + return port->type == PORT_AMBA ? "AMBA" : NULL; +} + +/* + * Release the memory region(s) being used by 'port' + */ +static void pl010_release_port(struct uart_port *port) +{ + release_mem_region(port->mapbase, UART_PORT_SIZE); +} + +/* + * Request the memory region(s) being used by 'port' + */ +static int pl010_request_port(struct uart_port *port) +{ + return request_mem_region(port->mapbase, UART_PORT_SIZE, "uart-pl010") + != NULL ? 0 : -EBUSY; +} + +/* + * Configure/autoconfigure the port. + */ +static void pl010_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_AMBA; + pl010_request_port(port); + } +} + +/* + * verify the new serial_struct (for TIOCSSERIAL). + */ +static int pl010_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + int ret = 0; + if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMBA) + ret = -EINVAL; + if (ser->irq < 0 || ser->irq >= nr_irqs) + ret = -EINVAL; + if (ser->baud_base < 9600) + ret = -EINVAL; + return ret; +} + +static const struct uart_ops amba_pl010_pops = { + .tx_empty = pl010_tx_empty, + .set_mctrl = pl010_set_mctrl, + .get_mctrl = pl010_get_mctrl, + .stop_tx = pl010_stop_tx, + .start_tx = pl010_start_tx, + .stop_rx = pl010_stop_rx, + .enable_ms = pl010_enable_ms, + .break_ctl = pl010_break_ctl, + .startup = pl010_startup, + .shutdown = pl010_shutdown, + .set_termios = pl010_set_termios, + .set_ldisc = pl010_set_ldisc, + .type = pl010_type, + .release_port = pl010_release_port, + .request_port = pl010_request_port, + .config_port = pl010_config_port, + .verify_port = pl010_verify_port, +}; + +static struct uart_amba_port *amba_ports[UART_NR]; + +#ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE + +static void pl010_console_putchar(struct uart_port *port, int ch) +{ + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); + unsigned int status; + + do { + status = readb(uap->port.membase + UART01x_FR); + barrier(); + } while (!UART_TX_READY(status)); + writel(ch, uap->port.membase + UART01x_DR); +} + +static void +pl010_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_amba_port *uap = amba_ports[co->index]; + unsigned int status, old_cr; + + clk_enable(uap->clk); + + /* + * First save the CR then disable the interrupts + */ + old_cr = readb(uap->port.membase + UART010_CR); + writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR); + + uart_console_write(&uap->port, s, count, pl010_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the TCR + */ + do { + status = readb(uap->port.membase + UART01x_FR); + barrier(); + } while (status & UART01x_FR_BUSY); + writel(old_cr, uap->port.membase + UART010_CR); + + clk_disable(uap->clk); +} + +static void __init +pl010_console_get_options(struct uart_amba_port *uap, int *baud, + int *parity, int *bits) +{ + if (readb(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) { + unsigned int lcr_h, quot; + lcr_h = readb(uap->port.membase + UART010_LCRH); + + *parity = 'n'; + if (lcr_h & UART01x_LCRH_PEN) { + if (lcr_h & UART01x_LCRH_EPS) + *parity = 'e'; + else + *parity = 'o'; + } + + if ((lcr_h & 0x60) == UART01x_LCRH_WLEN_7) + *bits = 7; + else + *bits = 8; + + quot = readb(uap->port.membase + UART010_LCRL) | + readb(uap->port.membase + UART010_LCRM) << 8; + *baud = uap->port.uartclk / (16 * (quot + 1)); + } +} + +static int __init pl010_console_setup(struct console *co, char *options) +{ + struct uart_amba_port *uap; + int baud = 38400; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + int ret; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= UART_NR) + co->index = 0; + uap = amba_ports[co->index]; + if (!uap) + return -ENODEV; + + ret = clk_prepare(uap->clk); + if (ret) + return ret; + + uap->port.uartclk = clk_get_rate(uap->clk); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + pl010_console_get_options(uap, &baud, &parity, &bits); + + return uart_set_options(&uap->port, co, baud, parity, bits, flow); +} + +static struct uart_driver amba_reg; +static struct console amba_console = { + .name = "ttyAM", + .write = pl010_console_write, + .device = uart_console_device, + .setup = pl010_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &amba_reg, +}; + +#define AMBA_CONSOLE &amba_console +#else +#define AMBA_CONSOLE NULL +#endif + +static DEFINE_MUTEX(amba_reg_lock); +static struct uart_driver amba_reg = { + .owner = THIS_MODULE, + .driver_name = "ttyAM", + .dev_name = "ttyAM", + .major = SERIAL_AMBA_MAJOR, + .minor = SERIAL_AMBA_MINOR, + .nr = UART_NR, + .cons = AMBA_CONSOLE, +}; + +static int pl010_probe(struct amba_device *dev, const struct amba_id *id) +{ + struct uart_amba_port *uap; + void __iomem *base; + int i, ret; + + for (i = 0; i < ARRAY_SIZE(amba_ports); i++) + if (amba_ports[i] == NULL) + break; + + if (i == ARRAY_SIZE(amba_ports)) + return -EBUSY; + + uap = devm_kzalloc(&dev->dev, sizeof(struct uart_amba_port), + GFP_KERNEL); + if (!uap) + return -ENOMEM; + + base = devm_ioremap(&dev->dev, dev->res.start, + resource_size(&dev->res)); + if (!base) + return -ENOMEM; + + uap->clk = devm_clk_get(&dev->dev, NULL); + if (IS_ERR(uap->clk)) + return PTR_ERR(uap->clk); + + uap->port.dev = &dev->dev; + uap->port.mapbase = dev->res.start; + uap->port.membase = base; + uap->port.iotype = UPIO_MEM; + uap->port.irq = dev->irq[0]; + uap->port.fifosize = 16; + uap->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_AMBA_PL010_CONSOLE); + uap->port.ops = &amba_pl010_pops; + uap->port.flags = UPF_BOOT_AUTOCONF; + uap->port.line = i; + uap->dev = dev; + uap->data = dev_get_platdata(&dev->dev); + + amba_ports[i] = uap; + + amba_set_drvdata(dev, uap); + + mutex_lock(&amba_reg_lock); + if (!amba_reg.state) { + ret = uart_register_driver(&amba_reg); + if (ret < 0) { + mutex_unlock(&amba_reg_lock); + dev_err(uap->port.dev, + "Failed to register AMBA-PL010 driver\n"); + return ret; + } + } + mutex_unlock(&amba_reg_lock); + + ret = uart_add_one_port(&amba_reg, &uap->port); + if (ret) + amba_ports[i] = NULL; + + return ret; +} + +static void pl010_remove(struct amba_device *dev) +{ + struct uart_amba_port *uap = amba_get_drvdata(dev); + int i; + bool busy = false; + + uart_remove_one_port(&amba_reg, &uap->port); + + for (i = 0; i < ARRAY_SIZE(amba_ports); i++) + if (amba_ports[i] == uap) + amba_ports[i] = NULL; + else if (amba_ports[i]) + busy = true; + + if (!busy) + uart_unregister_driver(&amba_reg); +} + +#ifdef CONFIG_PM_SLEEP +static int pl010_suspend(struct device *dev) +{ + struct uart_amba_port *uap = dev_get_drvdata(dev); + + if (uap) + uart_suspend_port(&amba_reg, &uap->port); + + return 0; +} + +static int pl010_resume(struct device *dev) +{ + struct uart_amba_port *uap = dev_get_drvdata(dev); + + if (uap) + uart_resume_port(&amba_reg, &uap->port); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(pl010_dev_pm_ops, pl010_suspend, pl010_resume); + +static const struct amba_id pl010_ids[] = { + { + .id = 0x00041010, + .mask = 0x000fffff, + }, + { 0, 0 }, +}; + +MODULE_DEVICE_TABLE(amba, pl010_ids); + +static struct amba_driver pl010_driver = { + .drv = { + .name = "uart-pl010", + .pm = &pl010_dev_pm_ops, + }, + .id_table = pl010_ids, + .probe = pl010_probe, + .remove = pl010_remove, +}; + +static int __init pl010_init(void) +{ + printk(KERN_INFO "Serial: AMBA driver\n"); + + return amba_driver_register(&pl010_driver); +} + +static void __exit pl010_exit(void) +{ + amba_driver_unregister(&pl010_driver); +} + +module_init(pl010_init); +module_exit(pl010_exit); + +MODULE_AUTHOR("ARM Ltd/Deep Blue Solutions Ltd"); +MODULE_DESCRIPTION("ARM AMBA serial port driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c new file mode 100644 index 000000000..d4a93a94b --- /dev/null +++ b/drivers/tty/serial/amba-pl011.c @@ -0,0 +1,2872 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver for AMBA serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright 1999 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * Copyright (C) 2010 ST-Ericsson SA + * + * This is a generic driver for ARM AMBA-type serial ports. They + * have a lot of 16550-like features, but are not register compatible. + * Note that although they do have CTS, DCD and DSR inputs, they do + * not have an RI input, nor do they have DTR or RTS outputs. If + * required, these have to be supplied via some other means (eg, GPIO) + * and hooked into this driver. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "amba-pl011.h" + +#define UART_NR 14 + +#define SERIAL_AMBA_MAJOR 204 +#define SERIAL_AMBA_MINOR 64 +#define SERIAL_AMBA_NR UART_NR + +#define AMBA_ISR_PASS_LIMIT 256 + +#define UART_DR_ERROR (UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE) +#define UART_DUMMY_DR_RX (1 << 16) + +static u16 pl011_std_offsets[REG_ARRAY_SIZE] = { + [REG_DR] = UART01x_DR, + [REG_FR] = UART01x_FR, + [REG_LCRH_RX] = UART011_LCRH, + [REG_LCRH_TX] = UART011_LCRH, + [REG_IBRD] = UART011_IBRD, + [REG_FBRD] = UART011_FBRD, + [REG_CR] = UART011_CR, + [REG_IFLS] = UART011_IFLS, + [REG_IMSC] = UART011_IMSC, + [REG_RIS] = UART011_RIS, + [REG_MIS] = UART011_MIS, + [REG_ICR] = UART011_ICR, + [REG_DMACR] = UART011_DMACR, +}; + +/* There is by now at least one vendor with differing details, so handle it */ +struct vendor_data { + const u16 *reg_offset; + unsigned int ifls; + unsigned int fr_busy; + unsigned int fr_dsr; + unsigned int fr_cts; + unsigned int fr_ri; + unsigned int inv_fr; + bool access_32b; + bool oversampling; + bool dma_threshold; + bool cts_event_workaround; + bool always_enabled; + bool fixed_options; + + unsigned int (*get_fifosize)(struct amba_device *dev); +}; + +static unsigned int get_fifosize_arm(struct amba_device *dev) +{ + return amba_rev(dev) < 3 ? 16 : 32; +} + +static struct vendor_data vendor_arm = { + .reg_offset = pl011_std_offsets, + .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8, + .fr_busy = UART01x_FR_BUSY, + .fr_dsr = UART01x_FR_DSR, + .fr_cts = UART01x_FR_CTS, + .fr_ri = UART011_FR_RI, + .oversampling = false, + .dma_threshold = false, + .cts_event_workaround = false, + .always_enabled = false, + .fixed_options = false, + .get_fifosize = get_fifosize_arm, +}; + +static const struct vendor_data vendor_sbsa = { + .reg_offset = pl011_std_offsets, + .fr_busy = UART01x_FR_BUSY, + .fr_dsr = UART01x_FR_DSR, + .fr_cts = UART01x_FR_CTS, + .fr_ri = UART011_FR_RI, + .access_32b = true, + .oversampling = false, + .dma_threshold = false, + .cts_event_workaround = false, + .always_enabled = true, + .fixed_options = true, +}; + +#ifdef CONFIG_ACPI_SPCR_TABLE +static const struct vendor_data vendor_qdt_qdf2400_e44 = { + .reg_offset = pl011_std_offsets, + .fr_busy = UART011_FR_TXFE, + .fr_dsr = UART01x_FR_DSR, + .fr_cts = UART01x_FR_CTS, + .fr_ri = UART011_FR_RI, + .inv_fr = UART011_FR_TXFE, + .access_32b = true, + .oversampling = false, + .dma_threshold = false, + .cts_event_workaround = false, + .always_enabled = true, + .fixed_options = true, +}; +#endif + +static u16 pl011_st_offsets[REG_ARRAY_SIZE] = { + [REG_DR] = UART01x_DR, + [REG_ST_DMAWM] = ST_UART011_DMAWM, + [REG_ST_TIMEOUT] = ST_UART011_TIMEOUT, + [REG_FR] = UART01x_FR, + [REG_LCRH_RX] = ST_UART011_LCRH_RX, + [REG_LCRH_TX] = ST_UART011_LCRH_TX, + [REG_IBRD] = UART011_IBRD, + [REG_FBRD] = UART011_FBRD, + [REG_CR] = UART011_CR, + [REG_IFLS] = UART011_IFLS, + [REG_IMSC] = UART011_IMSC, + [REG_RIS] = UART011_RIS, + [REG_MIS] = UART011_MIS, + [REG_ICR] = UART011_ICR, + [REG_DMACR] = UART011_DMACR, + [REG_ST_XFCR] = ST_UART011_XFCR, + [REG_ST_XON1] = ST_UART011_XON1, + [REG_ST_XON2] = ST_UART011_XON2, + [REG_ST_XOFF1] = ST_UART011_XOFF1, + [REG_ST_XOFF2] = ST_UART011_XOFF2, + [REG_ST_ITCR] = ST_UART011_ITCR, + [REG_ST_ITIP] = ST_UART011_ITIP, + [REG_ST_ABCR] = ST_UART011_ABCR, + [REG_ST_ABIMSC] = ST_UART011_ABIMSC, +}; + +static unsigned int get_fifosize_st(struct amba_device *dev) +{ + return 64; +} + +static struct vendor_data vendor_st = { + .reg_offset = pl011_st_offsets, + .ifls = UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF, + .fr_busy = UART01x_FR_BUSY, + .fr_dsr = UART01x_FR_DSR, + .fr_cts = UART01x_FR_CTS, + .fr_ri = UART011_FR_RI, + .oversampling = true, + .dma_threshold = true, + .cts_event_workaround = true, + .always_enabled = false, + .fixed_options = false, + .get_fifosize = get_fifosize_st, +}; + +static const u16 pl011_zte_offsets[REG_ARRAY_SIZE] = { + [REG_DR] = ZX_UART011_DR, + [REG_FR] = ZX_UART011_FR, + [REG_LCRH_RX] = ZX_UART011_LCRH, + [REG_LCRH_TX] = ZX_UART011_LCRH, + [REG_IBRD] = ZX_UART011_IBRD, + [REG_FBRD] = ZX_UART011_FBRD, + [REG_CR] = ZX_UART011_CR, + [REG_IFLS] = ZX_UART011_IFLS, + [REG_IMSC] = ZX_UART011_IMSC, + [REG_RIS] = ZX_UART011_RIS, + [REG_MIS] = ZX_UART011_MIS, + [REG_ICR] = ZX_UART011_ICR, + [REG_DMACR] = ZX_UART011_DMACR, +}; + +static unsigned int get_fifosize_zte(struct amba_device *dev) +{ + return 16; +} + +static struct vendor_data vendor_zte = { + .reg_offset = pl011_zte_offsets, + .access_32b = true, + .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8, + .fr_busy = ZX_UART01x_FR_BUSY, + .fr_dsr = ZX_UART01x_FR_DSR, + .fr_cts = ZX_UART01x_FR_CTS, + .fr_ri = ZX_UART011_FR_RI, + .get_fifosize = get_fifosize_zte, +}; + +/* Deals with DMA transactions */ + +struct pl011_dmabuf { + dma_addr_t dma; + size_t len; + char *buf; +}; + +struct pl011_dmarx_data { + struct dma_chan *chan; + struct completion complete; + bool use_buf_b; + struct pl011_dmabuf dbuf_a; + struct pl011_dmabuf dbuf_b; + dma_cookie_t cookie; + bool running; + struct timer_list timer; + unsigned int last_residue; + unsigned long last_jiffies; + bool auto_poll_rate; + unsigned int poll_rate; + unsigned int poll_timeout; +}; + +struct pl011_dmatx_data { + struct dma_chan *chan; + dma_addr_t dma; + size_t len; + char *buf; + bool queued; +}; + +/* + * We wrap our port structure around the generic uart_port. + */ +struct uart_amba_port { + struct uart_port port; + const u16 *reg_offset; + struct clk *clk; + const struct vendor_data *vendor; + unsigned int dmacr; /* dma control reg */ + unsigned int im; /* interrupt mask */ + unsigned int old_status; + unsigned int fifosize; /* vendor-specific */ + unsigned int old_cr; /* state during shutdown */ + unsigned int fixed_baud; /* vendor-set fixed baud rate */ + char type[12]; +#ifdef CONFIG_DMA_ENGINE + /* DMA stuff */ + bool using_tx_dma; + bool using_rx_dma; + struct pl011_dmarx_data dmarx; + struct pl011_dmatx_data dmatx; + bool dma_probed; +#endif +}; + +static unsigned int pl011_reg_to_offset(const struct uart_amba_port *uap, + unsigned int reg) +{ + return uap->reg_offset[reg]; +} + +static unsigned int pl011_read(const struct uart_amba_port *uap, + unsigned int reg) +{ + void __iomem *addr = uap->port.membase + pl011_reg_to_offset(uap, reg); + + return (uap->port.iotype == UPIO_MEM32) ? + readl_relaxed(addr) : readw_relaxed(addr); +} + +static void pl011_write(unsigned int val, const struct uart_amba_port *uap, + unsigned int reg) +{ + void __iomem *addr = uap->port.membase + pl011_reg_to_offset(uap, reg); + + if (uap->port.iotype == UPIO_MEM32) + writel_relaxed(val, addr); + else + writew_relaxed(val, addr); +} + +/* + * Reads up to 256 characters from the FIFO or until it's empty and + * inserts them into the TTY layer. Returns the number of characters + * read from the FIFO. + */ +static int pl011_fifo_to_tty(struct uart_amba_port *uap) +{ + unsigned int ch, flag, fifotaken; + int sysrq; + u16 status; + + for (fifotaken = 0; fifotaken != 256; fifotaken++) { + status = pl011_read(uap, REG_FR); + if (status & UART01x_FR_RXFE) + break; + + /* Take chars from the FIFO and update status */ + ch = pl011_read(uap, REG_DR) | UART_DUMMY_DR_RX; + flag = TTY_NORMAL; + uap->port.icount.rx++; + + if (unlikely(ch & UART_DR_ERROR)) { + if (ch & UART011_DR_BE) { + ch &= ~(UART011_DR_FE | UART011_DR_PE); + uap->port.icount.brk++; + if (uart_handle_break(&uap->port)) + continue; + } else if (ch & UART011_DR_PE) + uap->port.icount.parity++; + else if (ch & UART011_DR_FE) + uap->port.icount.frame++; + if (ch & UART011_DR_OE) + uap->port.icount.overrun++; + + ch &= uap->port.read_status_mask; + + if (ch & UART011_DR_BE) + flag = TTY_BREAK; + else if (ch & UART011_DR_PE) + flag = TTY_PARITY; + else if (ch & UART011_DR_FE) + flag = TTY_FRAME; + } + + spin_unlock(&uap->port.lock); + sysrq = uart_handle_sysrq_char(&uap->port, ch & 255); + spin_lock(&uap->port.lock); + + if (!sysrq) + uart_insert_char(&uap->port, ch, UART011_DR_OE, ch, flag); + } + + return fifotaken; +} + + +/* + * All the DMA operation mode stuff goes inside this ifdef. + * This assumes that you have a generic DMA device interface, + * no custom DMA interfaces are supported. + */ +#ifdef CONFIG_DMA_ENGINE + +#define PL011_DMA_BUFFER_SIZE PAGE_SIZE + +static int pl011_dmabuf_init(struct dma_chan *chan, struct pl011_dmabuf *db, + enum dma_data_direction dir) +{ + db->buf = dma_alloc_coherent(chan->device->dev, PL011_DMA_BUFFER_SIZE, + &db->dma, GFP_KERNEL); + if (!db->buf) + return -ENOMEM; + db->len = PL011_DMA_BUFFER_SIZE; + + return 0; +} + +static void pl011_dmabuf_free(struct dma_chan *chan, struct pl011_dmabuf *db, + enum dma_data_direction dir) +{ + if (db->buf) { + dma_free_coherent(chan->device->dev, + PL011_DMA_BUFFER_SIZE, db->buf, db->dma); + } +} + +static void pl011_dma_probe(struct uart_amba_port *uap) +{ + /* DMA is the sole user of the platform data right now */ + struct amba_pl011_data *plat = dev_get_platdata(uap->port.dev); + struct device *dev = uap->port.dev; + struct dma_slave_config tx_conf = { + .dst_addr = uap->port.mapbase + + pl011_reg_to_offset(uap, REG_DR), + .dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, + .direction = DMA_MEM_TO_DEV, + .dst_maxburst = uap->fifosize >> 1, + .device_fc = false, + }; + struct dma_chan *chan; + dma_cap_mask_t mask; + + uap->dma_probed = true; + chan = dma_request_chan(dev, "tx"); + if (IS_ERR(chan)) { + if (PTR_ERR(chan) == -EPROBE_DEFER) { + uap->dma_probed = false; + return; + } + + /* We need platform data */ + if (!plat || !plat->dma_filter) { + dev_info(uap->port.dev, "no DMA platform data\n"); + return; + } + + /* Try to acquire a generic DMA engine slave TX channel */ + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + chan = dma_request_channel(mask, plat->dma_filter, + plat->dma_tx_param); + if (!chan) { + dev_err(uap->port.dev, "no TX DMA channel!\n"); + return; + } + } + + dmaengine_slave_config(chan, &tx_conf); + uap->dmatx.chan = chan; + + dev_info(uap->port.dev, "DMA channel TX %s\n", + dma_chan_name(uap->dmatx.chan)); + + /* Optionally make use of an RX channel as well */ + chan = dma_request_slave_channel(dev, "rx"); + + if (!chan && plat && plat->dma_rx_param) { + chan = dma_request_channel(mask, plat->dma_filter, plat->dma_rx_param); + + if (!chan) { + dev_err(uap->port.dev, "no RX DMA channel!\n"); + return; + } + } + + if (chan) { + struct dma_slave_config rx_conf = { + .src_addr = uap->port.mapbase + + pl011_reg_to_offset(uap, REG_DR), + .src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, + .direction = DMA_DEV_TO_MEM, + .src_maxburst = uap->fifosize >> 2, + .device_fc = false, + }; + struct dma_slave_caps caps; + + /* + * Some DMA controllers provide information on their capabilities. + * If the controller does, check for suitable residue processing + * otherwise assime all is well. + */ + if (0 == dma_get_slave_caps(chan, &caps)) { + if (caps.residue_granularity == + DMA_RESIDUE_GRANULARITY_DESCRIPTOR) { + dma_release_channel(chan); + dev_info(uap->port.dev, + "RX DMA disabled - no residue processing\n"); + return; + } + } + dmaengine_slave_config(chan, &rx_conf); + uap->dmarx.chan = chan; + + uap->dmarx.auto_poll_rate = false; + if (plat && plat->dma_rx_poll_enable) { + /* Set poll rate if specified. */ + if (plat->dma_rx_poll_rate) { + uap->dmarx.auto_poll_rate = false; + uap->dmarx.poll_rate = plat->dma_rx_poll_rate; + } else { + /* + * 100 ms defaults to poll rate if not + * specified. This will be adjusted with + * the baud rate at set_termios. + */ + uap->dmarx.auto_poll_rate = true; + uap->dmarx.poll_rate = 100; + } + /* 3 secs defaults poll_timeout if not specified. */ + if (plat->dma_rx_poll_timeout) + uap->dmarx.poll_timeout = + plat->dma_rx_poll_timeout; + else + uap->dmarx.poll_timeout = 3000; + } else if (!plat && dev->of_node) { + uap->dmarx.auto_poll_rate = of_property_read_bool( + dev->of_node, "auto-poll"); + if (uap->dmarx.auto_poll_rate) { + u32 x; + + if (0 == of_property_read_u32(dev->of_node, + "poll-rate-ms", &x)) + uap->dmarx.poll_rate = x; + else + uap->dmarx.poll_rate = 100; + if (0 == of_property_read_u32(dev->of_node, + "poll-timeout-ms", &x)) + uap->dmarx.poll_timeout = x; + else + uap->dmarx.poll_timeout = 3000; + } + } + dev_info(uap->port.dev, "DMA channel RX %s\n", + dma_chan_name(uap->dmarx.chan)); + } +} + +static void pl011_dma_remove(struct uart_amba_port *uap) +{ + if (uap->dmatx.chan) + dma_release_channel(uap->dmatx.chan); + if (uap->dmarx.chan) + dma_release_channel(uap->dmarx.chan); +} + +/* Forward declare these for the refill routine */ +static int pl011_dma_tx_refill(struct uart_amba_port *uap); +static void pl011_start_tx_pio(struct uart_amba_port *uap); + +/* + * The current DMA TX buffer has been sent. + * Try to queue up another DMA buffer. + */ +static void pl011_dma_tx_callback(void *data) +{ + struct uart_amba_port *uap = data; + struct pl011_dmatx_data *dmatx = &uap->dmatx; + unsigned long flags; + u16 dmacr; + + spin_lock_irqsave(&uap->port.lock, flags); + if (uap->dmatx.queued) + dma_unmap_single(dmatx->chan->device->dev, dmatx->dma, + dmatx->len, DMA_TO_DEVICE); + + dmacr = uap->dmacr; + uap->dmacr = dmacr & ~UART011_TXDMAE; + pl011_write(uap->dmacr, uap, REG_DMACR); + + /* + * If TX DMA was disabled, it means that we've stopped the DMA for + * some reason (eg, XOFF received, or we want to send an X-char.) + * + * Note: we need to be careful here of a potential race between DMA + * and the rest of the driver - if the driver disables TX DMA while + * a TX buffer completing, we must update the tx queued status to + * get further refills (hence we check dmacr). + */ + if (!(dmacr & UART011_TXDMAE) || uart_tx_stopped(&uap->port) || + uart_circ_empty(&uap->port.state->xmit)) { + uap->dmatx.queued = false; + spin_unlock_irqrestore(&uap->port.lock, flags); + return; + } + + if (pl011_dma_tx_refill(uap) <= 0) + /* + * We didn't queue a DMA buffer for some reason, but we + * have data pending to be sent. Re-enable the TX IRQ. + */ + pl011_start_tx_pio(uap); + + spin_unlock_irqrestore(&uap->port.lock, flags); +} + +/* + * Try to refill the TX DMA buffer. + * Locking: called with port lock held and IRQs disabled. + * Returns: + * 1 if we queued up a TX DMA buffer. + * 0 if we didn't want to handle this by DMA + * <0 on error + */ +static int pl011_dma_tx_refill(struct uart_amba_port *uap) +{ + struct pl011_dmatx_data *dmatx = &uap->dmatx; + struct dma_chan *chan = dmatx->chan; + struct dma_device *dma_dev = chan->device; + struct dma_async_tx_descriptor *desc; + struct circ_buf *xmit = &uap->port.state->xmit; + unsigned int count; + + /* + * Try to avoid the overhead involved in using DMA if the + * transaction fits in the first half of the FIFO, by using + * the standard interrupt handling. This ensures that we + * issue a uart_write_wakeup() at the appropriate time. + */ + count = uart_circ_chars_pending(xmit); + if (count < (uap->fifosize >> 1)) { + uap->dmatx.queued = false; + return 0; + } + + /* + * Bodge: don't send the last character by DMA, as this + * will prevent XON from notifying us to restart DMA. + */ + count -= 1; + + /* Else proceed to copy the TX chars to the DMA buffer and fire DMA */ + if (count > PL011_DMA_BUFFER_SIZE) + count = PL011_DMA_BUFFER_SIZE; + + if (xmit->tail < xmit->head) + memcpy(&dmatx->buf[0], &xmit->buf[xmit->tail], count); + else { + size_t first = UART_XMIT_SIZE - xmit->tail; + size_t second; + + if (first > count) + first = count; + second = count - first; + + memcpy(&dmatx->buf[0], &xmit->buf[xmit->tail], first); + if (second) + memcpy(&dmatx->buf[first], &xmit->buf[0], second); + } + + dmatx->len = count; + dmatx->dma = dma_map_single(dma_dev->dev, dmatx->buf, count, + DMA_TO_DEVICE); + if (dmatx->dma == DMA_MAPPING_ERROR) { + uap->dmatx.queued = false; + dev_dbg(uap->port.dev, "unable to map TX DMA\n"); + return -EBUSY; + } + + desc = dmaengine_prep_slave_single(chan, dmatx->dma, dmatx->len, DMA_MEM_TO_DEV, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) { + dma_unmap_single(dma_dev->dev, dmatx->dma, dmatx->len, DMA_TO_DEVICE); + uap->dmatx.queued = false; + /* + * If DMA cannot be used right now, we complete this + * transaction via IRQ and let the TTY layer retry. + */ + dev_dbg(uap->port.dev, "TX DMA busy\n"); + return -EBUSY; + } + + /* Some data to go along to the callback */ + desc->callback = pl011_dma_tx_callback; + desc->callback_param = uap; + + /* All errors should happen at prepare time */ + dmaengine_submit(desc); + + /* Fire the DMA transaction */ + dma_dev->device_issue_pending(chan); + + uap->dmacr |= UART011_TXDMAE; + pl011_write(uap->dmacr, uap, REG_DMACR); + uap->dmatx.queued = true; + + /* + * Now we know that DMA will fire, so advance the ring buffer + * with the stuff we just dispatched. + */ + xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1); + uap->port.icount.tx += count; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&uap->port); + + return 1; +} + +/* + * We received a transmit interrupt without a pending X-char but with + * pending characters. + * Locking: called with port lock held and IRQs disabled. + * Returns: + * false if we want to use PIO to transmit + * true if we queued a DMA buffer + */ +static bool pl011_dma_tx_irq(struct uart_amba_port *uap) +{ + if (!uap->using_tx_dma) + return false; + + /* + * If we already have a TX buffer queued, but received a + * TX interrupt, it will be because we've just sent an X-char. + * Ensure the TX DMA is enabled and the TX IRQ is disabled. + */ + if (uap->dmatx.queued) { + uap->dmacr |= UART011_TXDMAE; + pl011_write(uap->dmacr, uap, REG_DMACR); + uap->im &= ~UART011_TXIM; + pl011_write(uap->im, uap, REG_IMSC); + return true; + } + + /* + * We don't have a TX buffer queued, so try to queue one. + * If we successfully queued a buffer, mask the TX IRQ. + */ + if (pl011_dma_tx_refill(uap) > 0) { + uap->im &= ~UART011_TXIM; + pl011_write(uap->im, uap, REG_IMSC); + return true; + } + return false; +} + +/* + * Stop the DMA transmit (eg, due to received XOFF). + * Locking: called with port lock held and IRQs disabled. + */ +static inline void pl011_dma_tx_stop(struct uart_amba_port *uap) +{ + if (uap->dmatx.queued) { + uap->dmacr &= ~UART011_TXDMAE; + pl011_write(uap->dmacr, uap, REG_DMACR); + } +} + +/* + * Try to start a DMA transmit, or in the case of an XON/OFF + * character queued for send, try to get that character out ASAP. + * Locking: called with port lock held and IRQs disabled. + * Returns: + * false if we want the TX IRQ to be enabled + * true if we have a buffer queued + */ +static inline bool pl011_dma_tx_start(struct uart_amba_port *uap) +{ + u16 dmacr; + + if (!uap->using_tx_dma) + return false; + + if (!uap->port.x_char) { + /* no X-char, try to push chars out in DMA mode */ + bool ret = true; + + if (!uap->dmatx.queued) { + if (pl011_dma_tx_refill(uap) > 0) { + uap->im &= ~UART011_TXIM; + pl011_write(uap->im, uap, REG_IMSC); + } else + ret = false; + } else if (!(uap->dmacr & UART011_TXDMAE)) { + uap->dmacr |= UART011_TXDMAE; + pl011_write(uap->dmacr, uap, REG_DMACR); + } + return ret; + } + + /* + * We have an X-char to send. Disable DMA to prevent it loading + * the TX fifo, and then see if we can stuff it into the FIFO. + */ + dmacr = uap->dmacr; + uap->dmacr &= ~UART011_TXDMAE; + pl011_write(uap->dmacr, uap, REG_DMACR); + + if (pl011_read(uap, REG_FR) & UART01x_FR_TXFF) { + /* + * No space in the FIFO, so enable the transmit interrupt + * so we know when there is space. Note that once we've + * loaded the character, we should just re-enable DMA. + */ + return false; + } + + pl011_write(uap->port.x_char, uap, REG_DR); + uap->port.icount.tx++; + uap->port.x_char = 0; + + /* Success - restore the DMA state */ + uap->dmacr = dmacr; + pl011_write(dmacr, uap, REG_DMACR); + + return true; +} + +/* + * Flush the transmit buffer. + * Locking: called with port lock held and IRQs disabled. + */ +static void pl011_dma_flush_buffer(struct uart_port *port) +__releases(&uap->port.lock) +__acquires(&uap->port.lock) +{ + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); + + if (!uap->using_tx_dma) + return; + + dmaengine_terminate_async(uap->dmatx.chan); + + if (uap->dmatx.queued) { + dma_unmap_single(uap->dmatx.chan->device->dev, uap->dmatx.dma, + uap->dmatx.len, DMA_TO_DEVICE); + uap->dmatx.queued = false; + uap->dmacr &= ~UART011_TXDMAE; + pl011_write(uap->dmacr, uap, REG_DMACR); + } +} + +static void pl011_dma_rx_callback(void *data); + +static int pl011_dma_rx_trigger_dma(struct uart_amba_port *uap) +{ + struct dma_chan *rxchan = uap->dmarx.chan; + struct pl011_dmarx_data *dmarx = &uap->dmarx; + struct dma_async_tx_descriptor *desc; + struct pl011_dmabuf *dbuf; + + if (!rxchan) + return -EIO; + + /* Start the RX DMA job */ + dbuf = uap->dmarx.use_buf_b ? + &uap->dmarx.dbuf_b : &uap->dmarx.dbuf_a; + desc = dmaengine_prep_slave_single(rxchan, dbuf->dma, dbuf->len, + DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + /* + * If the DMA engine is busy and cannot prepare a + * channel, no big deal, the driver will fall back + * to interrupt mode as a result of this error code. + */ + if (!desc) { + uap->dmarx.running = false; + dmaengine_terminate_all(rxchan); + return -EBUSY; + } + + /* Some data to go along to the callback */ + desc->callback = pl011_dma_rx_callback; + desc->callback_param = uap; + dmarx->cookie = dmaengine_submit(desc); + dma_async_issue_pending(rxchan); + + uap->dmacr |= UART011_RXDMAE; + pl011_write(uap->dmacr, uap, REG_DMACR); + uap->dmarx.running = true; + + uap->im &= ~UART011_RXIM; + pl011_write(uap->im, uap, REG_IMSC); + + return 0; +} + +/* + * This is called when either the DMA job is complete, or + * the FIFO timeout interrupt occurred. This must be called + * with the port spinlock uap->port.lock held. + */ +static void pl011_dma_rx_chars(struct uart_amba_port *uap, + u32 pending, bool use_buf_b, + bool readfifo) +{ + struct tty_port *port = &uap->port.state->port; + struct pl011_dmabuf *dbuf = use_buf_b ? + &uap->dmarx.dbuf_b : &uap->dmarx.dbuf_a; + int dma_count = 0; + u32 fifotaken = 0; /* only used for vdbg() */ + + struct pl011_dmarx_data *dmarx = &uap->dmarx; + int dmataken = 0; + + if (uap->dmarx.poll_rate) { + /* The data can be taken by polling */ + dmataken = dbuf->len - dmarx->last_residue; + /* Recalculate the pending size */ + if (pending >= dmataken) + pending -= dmataken; + } + + /* Pick the remain data from the DMA */ + if (pending) { + + /* + * First take all chars in the DMA pipe, then look in the FIFO. + * Note that tty_insert_flip_buf() tries to take as many chars + * as it can. + */ + dma_count = tty_insert_flip_string(port, dbuf->buf + dmataken, + pending); + + uap->port.icount.rx += dma_count; + if (dma_count < pending) + dev_warn(uap->port.dev, + "couldn't insert all characters (TTY is full?)\n"); + } + + /* Reset the last_residue for Rx DMA poll */ + if (uap->dmarx.poll_rate) + dmarx->last_residue = dbuf->len; + + /* + * Only continue with trying to read the FIFO if all DMA chars have + * been taken first. + */ + if (dma_count == pending && readfifo) { + /* Clear any error flags */ + pl011_write(UART011_OEIS | UART011_BEIS | UART011_PEIS | + UART011_FEIS, uap, REG_ICR); + + /* + * If we read all the DMA'd characters, and we had an + * incomplete buffer, that could be due to an rx error, or + * maybe we just timed out. Read any pending chars and check + * the error status. + * + * Error conditions will only occur in the FIFO, these will + * trigger an immediate interrupt and stop the DMA job, so we + * will always find the error in the FIFO, never in the DMA + * buffer. + */ + fifotaken = pl011_fifo_to_tty(uap); + } + + spin_unlock(&uap->port.lock); + dev_vdbg(uap->port.dev, + "Took %d chars from DMA buffer and %d chars from the FIFO\n", + dma_count, fifotaken); + tty_flip_buffer_push(port); + spin_lock(&uap->port.lock); +} + +static void pl011_dma_rx_irq(struct uart_amba_port *uap) +{ + struct pl011_dmarx_data *dmarx = &uap->dmarx; + struct dma_chan *rxchan = dmarx->chan; + struct pl011_dmabuf *dbuf = dmarx->use_buf_b ? + &dmarx->dbuf_b : &dmarx->dbuf_a; + size_t pending; + struct dma_tx_state state; + enum dma_status dmastat; + + /* + * Pause the transfer so we can trust the current counter, + * do this before we pause the PL011 block, else we may + * overflow the FIFO. + */ + if (dmaengine_pause(rxchan)) + dev_err(uap->port.dev, "unable to pause DMA transfer\n"); + dmastat = rxchan->device->device_tx_status(rxchan, + dmarx->cookie, &state); + if (dmastat != DMA_PAUSED) + dev_err(uap->port.dev, "unable to pause DMA transfer\n"); + + /* Disable RX DMA - incoming data will wait in the FIFO */ + uap->dmacr &= ~UART011_RXDMAE; + pl011_write(uap->dmacr, uap, REG_DMACR); + uap->dmarx.running = false; + + pending = dbuf->len - state.residue; + BUG_ON(pending > PL011_DMA_BUFFER_SIZE); + /* Then we terminate the transfer - we now know our residue */ + dmaengine_terminate_all(rxchan); + + /* + * This will take the chars we have so far and insert + * into the framework. + */ + pl011_dma_rx_chars(uap, pending, dmarx->use_buf_b, true); + + /* Switch buffer & re-trigger DMA job */ + dmarx->use_buf_b = !dmarx->use_buf_b; + if (pl011_dma_rx_trigger_dma(uap)) { + dev_dbg(uap->port.dev, "could not retrigger RX DMA job " + "fall back to interrupt mode\n"); + uap->im |= UART011_RXIM; + pl011_write(uap->im, uap, REG_IMSC); + } +} + +static void pl011_dma_rx_callback(void *data) +{ + struct uart_amba_port *uap = data; + struct pl011_dmarx_data *dmarx = &uap->dmarx; + struct dma_chan *rxchan = dmarx->chan; + bool lastbuf = dmarx->use_buf_b; + struct pl011_dmabuf *dbuf = dmarx->use_buf_b ? + &dmarx->dbuf_b : &dmarx->dbuf_a; + size_t pending; + struct dma_tx_state state; + int ret; + + /* + * This completion interrupt occurs typically when the + * RX buffer is totally stuffed but no timeout has yet + * occurred. When that happens, we just want the RX + * routine to flush out the secondary DMA buffer while + * we immediately trigger the next DMA job. + */ + spin_lock_irq(&uap->port.lock); + /* + * Rx data can be taken by the UART interrupts during + * the DMA irq handler. So we check the residue here. + */ + rxchan->device->device_tx_status(rxchan, dmarx->cookie, &state); + pending = dbuf->len - state.residue; + BUG_ON(pending > PL011_DMA_BUFFER_SIZE); + /* Then we terminate the transfer - we now know our residue */ + dmaengine_terminate_all(rxchan); + + uap->dmarx.running = false; + dmarx->use_buf_b = !lastbuf; + ret = pl011_dma_rx_trigger_dma(uap); + + pl011_dma_rx_chars(uap, pending, lastbuf, false); + spin_unlock_irq(&uap->port.lock); + /* + * Do this check after we picked the DMA chars so we don't + * get some IRQ immediately from RX. + */ + if (ret) { + dev_dbg(uap->port.dev, "could not retrigger RX DMA job " + "fall back to interrupt mode\n"); + uap->im |= UART011_RXIM; + pl011_write(uap->im, uap, REG_IMSC); + } +} + +/* + * Stop accepting received characters, when we're shutting down or + * suspending this port. + * Locking: called with port lock held and IRQs disabled. + */ +static inline void pl011_dma_rx_stop(struct uart_amba_port *uap) +{ + if (!uap->using_rx_dma) + return; + + /* FIXME. Just disable the DMA enable */ + uap->dmacr &= ~UART011_RXDMAE; + pl011_write(uap->dmacr, uap, REG_DMACR); +} + +/* + * Timer handler for Rx DMA polling. + * Every polling, It checks the residue in the dma buffer and transfer + * data to the tty. Also, last_residue is updated for the next polling. + */ +static void pl011_dma_rx_poll(struct timer_list *t) +{ + struct uart_amba_port *uap = from_timer(uap, t, dmarx.timer); + struct tty_port *port = &uap->port.state->port; + struct pl011_dmarx_data *dmarx = &uap->dmarx; + struct dma_chan *rxchan = uap->dmarx.chan; + unsigned long flags = 0; + unsigned int dmataken = 0; + unsigned int size = 0; + struct pl011_dmabuf *dbuf; + int dma_count; + struct dma_tx_state state; + + dbuf = dmarx->use_buf_b ? &uap->dmarx.dbuf_b : &uap->dmarx.dbuf_a; + rxchan->device->device_tx_status(rxchan, dmarx->cookie, &state); + if (likely(state.residue < dmarx->last_residue)) { + dmataken = dbuf->len - dmarx->last_residue; + size = dmarx->last_residue - state.residue; + dma_count = tty_insert_flip_string(port, dbuf->buf + dmataken, + size); + if (dma_count == size) + dmarx->last_residue = state.residue; + dmarx->last_jiffies = jiffies; + } + tty_flip_buffer_push(port); + + /* + * If no data is received in poll_timeout, the driver will fall back + * to interrupt mode. We will retrigger DMA at the first interrupt. + */ + if (jiffies_to_msecs(jiffies - dmarx->last_jiffies) + > uap->dmarx.poll_timeout) { + + spin_lock_irqsave(&uap->port.lock, flags); + pl011_dma_rx_stop(uap); + uap->im |= UART011_RXIM; + pl011_write(uap->im, uap, REG_IMSC); + spin_unlock_irqrestore(&uap->port.lock, flags); + + uap->dmarx.running = false; + dmaengine_terminate_all(rxchan); + del_timer(&uap->dmarx.timer); + } else { + mod_timer(&uap->dmarx.timer, + jiffies + msecs_to_jiffies(uap->dmarx.poll_rate)); + } +} + +static void pl011_dma_startup(struct uart_amba_port *uap) +{ + int ret; + + if (!uap->dma_probed) + pl011_dma_probe(uap); + + if (!uap->dmatx.chan) + return; + + uap->dmatx.buf = kmalloc(PL011_DMA_BUFFER_SIZE, GFP_KERNEL | __GFP_DMA); + if (!uap->dmatx.buf) { + dev_err(uap->port.dev, "no memory for DMA TX buffer\n"); + uap->port.fifosize = uap->fifosize; + return; + } + + uap->dmatx.len = PL011_DMA_BUFFER_SIZE; + + /* The DMA buffer is now the FIFO the TTY subsystem can use */ + uap->port.fifosize = PL011_DMA_BUFFER_SIZE; + uap->using_tx_dma = true; + + if (!uap->dmarx.chan) + goto skip_rx; + + /* Allocate and map DMA RX buffers */ + ret = pl011_dmabuf_init(uap->dmarx.chan, &uap->dmarx.dbuf_a, + DMA_FROM_DEVICE); + if (ret) { + dev_err(uap->port.dev, "failed to init DMA %s: %d\n", + "RX buffer A", ret); + goto skip_rx; + } + + ret = pl011_dmabuf_init(uap->dmarx.chan, &uap->dmarx.dbuf_b, + DMA_FROM_DEVICE); + if (ret) { + dev_err(uap->port.dev, "failed to init DMA %s: %d\n", + "RX buffer B", ret); + pl011_dmabuf_free(uap->dmarx.chan, &uap->dmarx.dbuf_a, + DMA_FROM_DEVICE); + goto skip_rx; + } + + uap->using_rx_dma = true; + +skip_rx: + /* Turn on DMA error (RX/TX will be enabled on demand) */ + uap->dmacr |= UART011_DMAONERR; + pl011_write(uap->dmacr, uap, REG_DMACR); + + /* + * ST Micro variants has some specific dma burst threshold + * compensation. Set this to 16 bytes, so burst will only + * be issued above/below 16 bytes. + */ + if (uap->vendor->dma_threshold) + pl011_write(ST_UART011_DMAWM_RX_16 | ST_UART011_DMAWM_TX_16, + uap, REG_ST_DMAWM); + + if (uap->using_rx_dma) { + if (pl011_dma_rx_trigger_dma(uap)) + dev_dbg(uap->port.dev, "could not trigger initial " + "RX DMA job, fall back to interrupt mode\n"); + if (uap->dmarx.poll_rate) { + timer_setup(&uap->dmarx.timer, pl011_dma_rx_poll, 0); + mod_timer(&uap->dmarx.timer, + jiffies + + msecs_to_jiffies(uap->dmarx.poll_rate)); + uap->dmarx.last_residue = PL011_DMA_BUFFER_SIZE; + uap->dmarx.last_jiffies = jiffies; + } + } +} + +static void pl011_dma_shutdown(struct uart_amba_port *uap) +{ + if (!(uap->using_tx_dma || uap->using_rx_dma)) + return; + + /* Disable RX and TX DMA */ + while (pl011_read(uap, REG_FR) & uap->vendor->fr_busy) + cpu_relax(); + + spin_lock_irq(&uap->port.lock); + uap->dmacr &= ~(UART011_DMAONERR | UART011_RXDMAE | UART011_TXDMAE); + pl011_write(uap->dmacr, uap, REG_DMACR); + spin_unlock_irq(&uap->port.lock); + + if (uap->using_tx_dma) { + /* In theory, this should already be done by pl011_dma_flush_buffer */ + dmaengine_terminate_all(uap->dmatx.chan); + if (uap->dmatx.queued) { + dma_unmap_single(uap->dmatx.chan->device->dev, + uap->dmatx.dma, uap->dmatx.len, + DMA_TO_DEVICE); + uap->dmatx.queued = false; + } + + kfree(uap->dmatx.buf); + uap->using_tx_dma = false; + } + + if (uap->using_rx_dma) { + dmaengine_terminate_all(uap->dmarx.chan); + /* Clean up the RX DMA */ + pl011_dmabuf_free(uap->dmarx.chan, &uap->dmarx.dbuf_a, DMA_FROM_DEVICE); + pl011_dmabuf_free(uap->dmarx.chan, &uap->dmarx.dbuf_b, DMA_FROM_DEVICE); + if (uap->dmarx.poll_rate) + del_timer_sync(&uap->dmarx.timer); + uap->using_rx_dma = false; + } +} + +static inline bool pl011_dma_rx_available(struct uart_amba_port *uap) +{ + return uap->using_rx_dma; +} + +static inline bool pl011_dma_rx_running(struct uart_amba_port *uap) +{ + return uap->using_rx_dma && uap->dmarx.running; +} + +#else +/* Blank functions if the DMA engine is not available */ +static inline void pl011_dma_remove(struct uart_amba_port *uap) +{ +} + +static inline void pl011_dma_startup(struct uart_amba_port *uap) +{ +} + +static inline void pl011_dma_shutdown(struct uart_amba_port *uap) +{ +} + +static inline bool pl011_dma_tx_irq(struct uart_amba_port *uap) +{ + return false; +} + +static inline void pl011_dma_tx_stop(struct uart_amba_port *uap) +{ +} + +static inline bool pl011_dma_tx_start(struct uart_amba_port *uap) +{ + return false; +} + +static inline void pl011_dma_rx_irq(struct uart_amba_port *uap) +{ +} + +static inline void pl011_dma_rx_stop(struct uart_amba_port *uap) +{ +} + +static inline int pl011_dma_rx_trigger_dma(struct uart_amba_port *uap) +{ + return -EIO; +} + +static inline bool pl011_dma_rx_available(struct uart_amba_port *uap) +{ + return false; +} + +static inline bool pl011_dma_rx_running(struct uart_amba_port *uap) +{ + return false; +} + +#define pl011_dma_flush_buffer NULL +#endif + +static void pl011_stop_tx(struct uart_port *port) +{ + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); + + uap->im &= ~UART011_TXIM; + pl011_write(uap->im, uap, REG_IMSC); + pl011_dma_tx_stop(uap); +} + +static bool pl011_tx_chars(struct uart_amba_port *uap, bool from_irq); + +/* Start TX with programmed I/O only (no DMA) */ +static void pl011_start_tx_pio(struct uart_amba_port *uap) +{ + if (pl011_tx_chars(uap, false)) { + uap->im |= UART011_TXIM; + pl011_write(uap->im, uap, REG_IMSC); + } +} + +static void pl011_start_tx(struct uart_port *port) +{ + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); + + if (!pl011_dma_tx_start(uap)) + pl011_start_tx_pio(uap); +} + +static void pl011_stop_rx(struct uart_port *port) +{ + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); + + uap->im &= ~(UART011_RXIM|UART011_RTIM|UART011_FEIM| + UART011_PEIM|UART011_BEIM|UART011_OEIM); + pl011_write(uap->im, uap, REG_IMSC); + + pl011_dma_rx_stop(uap); +} + +static void pl011_throttle_rx(struct uart_port *port) +{ + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + pl011_stop_rx(port); + spin_unlock_irqrestore(&port->lock, flags); +} + +static void pl011_enable_ms(struct uart_port *port) +{ + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); + + uap->im |= UART011_RIMIM|UART011_CTSMIM|UART011_DCDMIM|UART011_DSRMIM; + pl011_write(uap->im, uap, REG_IMSC); +} + +static void pl011_rx_chars(struct uart_amba_port *uap) +__releases(&uap->port.lock) +__acquires(&uap->port.lock) +{ + pl011_fifo_to_tty(uap); + + spin_unlock(&uap->port.lock); + tty_flip_buffer_push(&uap->port.state->port); + /* + * If we were temporarily out of DMA mode for a while, + * attempt to switch back to DMA mode again. + */ + if (pl011_dma_rx_available(uap)) { + if (pl011_dma_rx_trigger_dma(uap)) { + dev_dbg(uap->port.dev, "could not trigger RX DMA job " + "fall back to interrupt mode again\n"); + uap->im |= UART011_RXIM; + pl011_write(uap->im, uap, REG_IMSC); + } else { +#ifdef CONFIG_DMA_ENGINE + /* Start Rx DMA poll */ + if (uap->dmarx.poll_rate) { + uap->dmarx.last_jiffies = jiffies; + uap->dmarx.last_residue = PL011_DMA_BUFFER_SIZE; + mod_timer(&uap->dmarx.timer, + jiffies + + msecs_to_jiffies(uap->dmarx.poll_rate)); + } +#endif + } + } + spin_lock(&uap->port.lock); +} + +static bool pl011_tx_char(struct uart_amba_port *uap, unsigned char c, + bool from_irq) +{ + if (unlikely(!from_irq) && + pl011_read(uap, REG_FR) & UART01x_FR_TXFF) + return false; /* unable to transmit character */ + + pl011_write(c, uap, REG_DR); + uap->port.icount.tx++; + + return true; +} + +/* Returns true if tx interrupts have to be (kept) enabled */ +static bool pl011_tx_chars(struct uart_amba_port *uap, bool from_irq) +{ + struct circ_buf *xmit = &uap->port.state->xmit; + int count = uap->fifosize >> 1; + + if (uap->port.x_char) { + if (!pl011_tx_char(uap, uap->port.x_char, from_irq)) + return true; + uap->port.x_char = 0; + --count; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(&uap->port)) { + pl011_stop_tx(&uap->port); + return false; + } + + /* If we are using DMA mode, try to send some characters. */ + if (pl011_dma_tx_irq(uap)) + return true; + + do { + if (likely(from_irq) && count-- == 0) + break; + + if (!pl011_tx_char(uap, xmit->buf[xmit->tail], from_irq)) + break; + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + } while (!uart_circ_empty(xmit)); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&uap->port); + + if (uart_circ_empty(xmit)) { + pl011_stop_tx(&uap->port); + return false; + } + return true; +} + +static void pl011_modem_status(struct uart_amba_port *uap) +{ + unsigned int status, delta; + + status = pl011_read(uap, REG_FR) & UART01x_FR_MODEM_ANY; + + delta = status ^ uap->old_status; + uap->old_status = status; + + if (!delta) + return; + + if (delta & UART01x_FR_DCD) + uart_handle_dcd_change(&uap->port, status & UART01x_FR_DCD); + + if (delta & uap->vendor->fr_dsr) + uap->port.icount.dsr++; + + if (delta & uap->vendor->fr_cts) + uart_handle_cts_change(&uap->port, + status & uap->vendor->fr_cts); + + wake_up_interruptible(&uap->port.state->port.delta_msr_wait); +} + +static void check_apply_cts_event_workaround(struct uart_amba_port *uap) +{ + if (!uap->vendor->cts_event_workaround) + return; + + /* workaround to make sure that all bits are unlocked.. */ + pl011_write(0x00, uap, REG_ICR); + + /* + * WA: introduce 26ns(1 uart clk) delay before W1C; + * single apb access will incur 2 pclk(133.12Mhz) delay, + * so add 2 dummy reads + */ + pl011_read(uap, REG_ICR); + pl011_read(uap, REG_ICR); +} + +static irqreturn_t pl011_int(int irq, void *dev_id) +{ + struct uart_amba_port *uap = dev_id; + unsigned long flags; + unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT; + int handled = 0; + + spin_lock_irqsave(&uap->port.lock, flags); + status = pl011_read(uap, REG_RIS) & uap->im; + if (status) { + do { + check_apply_cts_event_workaround(uap); + + pl011_write(status & ~(UART011_TXIS|UART011_RTIS| + UART011_RXIS), + uap, REG_ICR); + + if (status & (UART011_RTIS|UART011_RXIS)) { + if (pl011_dma_rx_running(uap)) + pl011_dma_rx_irq(uap); + else + pl011_rx_chars(uap); + } + if (status & (UART011_DSRMIS|UART011_DCDMIS| + UART011_CTSMIS|UART011_RIMIS)) + pl011_modem_status(uap); + if (status & UART011_TXIS) + pl011_tx_chars(uap, true); + + if (pass_counter-- == 0) + break; + + status = pl011_read(uap, REG_RIS) & uap->im; + } while (status != 0); + handled = 1; + } + + spin_unlock_irqrestore(&uap->port.lock, flags); + + return IRQ_RETVAL(handled); +} + +static unsigned int pl011_tx_empty(struct uart_port *port) +{ + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); + + /* Allow feature register bits to be inverted to work around errata */ + unsigned int status = pl011_read(uap, REG_FR) ^ uap->vendor->inv_fr; + + return status & (uap->vendor->fr_busy | UART01x_FR_TXFF) ? + 0 : TIOCSER_TEMT; +} + +static unsigned int pl011_get_mctrl(struct uart_port *port) +{ + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); + unsigned int result = 0; + unsigned int status = pl011_read(uap, REG_FR); + +#define TIOCMBIT(uartbit, tiocmbit) \ + if (status & uartbit) \ + result |= tiocmbit + + TIOCMBIT(UART01x_FR_DCD, TIOCM_CAR); + TIOCMBIT(uap->vendor->fr_dsr, TIOCM_DSR); + TIOCMBIT(uap->vendor->fr_cts, TIOCM_CTS); + TIOCMBIT(uap->vendor->fr_ri, TIOCM_RNG); +#undef TIOCMBIT + return result; +} + +static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); + unsigned int cr; + + cr = pl011_read(uap, REG_CR); + +#define TIOCMBIT(tiocmbit, uartbit) \ + if (mctrl & tiocmbit) \ + cr |= uartbit; \ + else \ + cr &= ~uartbit + + TIOCMBIT(TIOCM_RTS, UART011_CR_RTS); + TIOCMBIT(TIOCM_DTR, UART011_CR_DTR); + TIOCMBIT(TIOCM_OUT1, UART011_CR_OUT1); + TIOCMBIT(TIOCM_OUT2, UART011_CR_OUT2); + TIOCMBIT(TIOCM_LOOP, UART011_CR_LBE); + + if (port->status & UPSTAT_AUTORTS) { + /* We need to disable auto-RTS if we want to turn RTS off */ + TIOCMBIT(TIOCM_RTS, UART011_CR_RTSEN); + } +#undef TIOCMBIT + + pl011_write(cr, uap, REG_CR); +} + +static void pl011_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); + unsigned long flags; + unsigned int lcr_h; + + spin_lock_irqsave(&uap->port.lock, flags); + lcr_h = pl011_read(uap, REG_LCRH_TX); + if (break_state == -1) + lcr_h |= UART01x_LCRH_BRK; + else + lcr_h &= ~UART01x_LCRH_BRK; + pl011_write(lcr_h, uap, REG_LCRH_TX); + spin_unlock_irqrestore(&uap->port.lock, flags); +} + +#ifdef CONFIG_CONSOLE_POLL + +static void pl011_quiesce_irqs(struct uart_port *port) +{ + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); + + pl011_write(pl011_read(uap, REG_MIS), uap, REG_ICR); + /* + * There is no way to clear TXIM as this is "ready to transmit IRQ", so + * we simply mask it. start_tx() will unmask it. + * + * Note we can race with start_tx(), and if the race happens, the + * polling user might get another interrupt just after we clear it. + * But it should be OK and can happen even w/o the race, e.g. + * controller immediately got some new data and raised the IRQ. + * + * And whoever uses polling routines assumes that it manages the device + * (including tx queue), so we're also fine with start_tx()'s caller + * side. + */ + pl011_write(pl011_read(uap, REG_IMSC) & ~UART011_TXIM, uap, + REG_IMSC); +} + +static int pl011_get_poll_char(struct uart_port *port) +{ + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); + unsigned int status; + + /* + * The caller might need IRQs lowered, e.g. if used with KDB NMI + * debugger. + */ + pl011_quiesce_irqs(port); + + status = pl011_read(uap, REG_FR); + if (status & UART01x_FR_RXFE) + return NO_POLL_CHAR; + + return pl011_read(uap, REG_DR); +} + +static void pl011_put_poll_char(struct uart_port *port, + unsigned char ch) +{ + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); + + while (pl011_read(uap, REG_FR) & UART01x_FR_TXFF) + cpu_relax(); + + pl011_write(ch, uap, REG_DR); +} + +#endif /* CONFIG_CONSOLE_POLL */ + +static int pl011_hwinit(struct uart_port *port) +{ + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); + int retval; + + /* Optionaly enable pins to be muxed in and configured */ + pinctrl_pm_select_default_state(port->dev); + + /* + * Try to enable the clock producer. + */ + retval = clk_prepare_enable(uap->clk); + if (retval) + return retval; + + uap->port.uartclk = clk_get_rate(uap->clk); + + /* Clear pending error and receive interrupts */ + pl011_write(UART011_OEIS | UART011_BEIS | UART011_PEIS | + UART011_FEIS | UART011_RTIS | UART011_RXIS, + uap, REG_ICR); + + /* + * Save interrupts enable mask, and enable RX interrupts in case if + * the interrupt is used for NMI entry. + */ + uap->im = pl011_read(uap, REG_IMSC); + pl011_write(UART011_RTIM | UART011_RXIM, uap, REG_IMSC); + + if (dev_get_platdata(uap->port.dev)) { + struct amba_pl011_data *plat; + + plat = dev_get_platdata(uap->port.dev); + if (plat->init) + plat->init(); + } + return 0; +} + +static bool pl011_split_lcrh(const struct uart_amba_port *uap) +{ + return pl011_reg_to_offset(uap, REG_LCRH_RX) != + pl011_reg_to_offset(uap, REG_LCRH_TX); +} + +static void pl011_write_lcr_h(struct uart_amba_port *uap, unsigned int lcr_h) +{ + pl011_write(lcr_h, uap, REG_LCRH_RX); + if (pl011_split_lcrh(uap)) { + int i; + /* + * Wait 10 PCLKs before writing LCRH_TX register, + * to get this delay write read only register 10 times + */ + for (i = 0; i < 10; ++i) + pl011_write(0xff, uap, REG_MIS); + pl011_write(lcr_h, uap, REG_LCRH_TX); + } +} + +static int pl011_allocate_irq(struct uart_amba_port *uap) +{ + pl011_write(uap->im, uap, REG_IMSC); + + return request_irq(uap->port.irq, pl011_int, IRQF_SHARED, "uart-pl011", uap); +} + +/* + * Enable interrupts, only timeouts when using DMA + * if initial RX DMA job failed, start in interrupt mode + * as well. + */ +static void pl011_enable_interrupts(struct uart_amba_port *uap) +{ + unsigned long flags; + unsigned int i; + + spin_lock_irqsave(&uap->port.lock, flags); + + /* Clear out any spuriously appearing RX interrupts */ + pl011_write(UART011_RTIS | UART011_RXIS, uap, REG_ICR); + + /* + * RXIS is asserted only when the RX FIFO transitions from below + * to above the trigger threshold. If the RX FIFO is already + * full to the threshold this can't happen and RXIS will now be + * stuck off. Drain the RX FIFO explicitly to fix this: + */ + for (i = 0; i < uap->fifosize * 2; ++i) { + if (pl011_read(uap, REG_FR) & UART01x_FR_RXFE) + break; + + pl011_read(uap, REG_DR); + } + + uap->im = UART011_RTIM; + if (!pl011_dma_rx_running(uap)) + uap->im |= UART011_RXIM; + pl011_write(uap->im, uap, REG_IMSC); + spin_unlock_irqrestore(&uap->port.lock, flags); +} + +static void pl011_unthrottle_rx(struct uart_port *port) +{ + struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port); + unsigned long flags; + + spin_lock_irqsave(&uap->port.lock, flags); + + uap->im = UART011_RTIM; + if (!pl011_dma_rx_running(uap)) + uap->im |= UART011_RXIM; + + pl011_write(uap->im, uap, REG_IMSC); + + spin_unlock_irqrestore(&uap->port.lock, flags); +} + +static int pl011_startup(struct uart_port *port) +{ + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); + unsigned int cr; + int retval; + + retval = pl011_hwinit(port); + if (retval) + goto clk_dis; + + retval = pl011_allocate_irq(uap); + if (retval) + goto clk_dis; + + pl011_write(uap->vendor->ifls, uap, REG_IFLS); + + spin_lock_irq(&uap->port.lock); + + /* restore RTS and DTR */ + cr = uap->old_cr & (UART011_CR_RTS | UART011_CR_DTR); + cr |= UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE; + pl011_write(cr, uap, REG_CR); + + spin_unlock_irq(&uap->port.lock); + + /* + * initialise the old status of the modem signals + */ + uap->old_status = pl011_read(uap, REG_FR) & UART01x_FR_MODEM_ANY; + + /* Startup DMA */ + pl011_dma_startup(uap); + + pl011_enable_interrupts(uap); + + return 0; + + clk_dis: + clk_disable_unprepare(uap->clk); + return retval; +} + +static int sbsa_uart_startup(struct uart_port *port) +{ + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); + int retval; + + retval = pl011_hwinit(port); + if (retval) + return retval; + + retval = pl011_allocate_irq(uap); + if (retval) + return retval; + + /* The SBSA UART does not support any modem status lines. */ + uap->old_status = 0; + + pl011_enable_interrupts(uap); + + return 0; +} + +static void pl011_shutdown_channel(struct uart_amba_port *uap, + unsigned int lcrh) +{ + unsigned long val; + + val = pl011_read(uap, lcrh); + val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN); + pl011_write(val, uap, lcrh); +} + +/* + * disable the port. It should not disable RTS and DTR. + * Also RTS and DTR state should be preserved to restore + * it during startup(). + */ +static void pl011_disable_uart(struct uart_amba_port *uap) +{ + unsigned int cr; + + uap->port.status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS); + spin_lock_irq(&uap->port.lock); + cr = pl011_read(uap, REG_CR); + uap->old_cr = cr; + cr &= UART011_CR_RTS | UART011_CR_DTR; + cr |= UART01x_CR_UARTEN | UART011_CR_TXE; + pl011_write(cr, uap, REG_CR); + spin_unlock_irq(&uap->port.lock); + + /* + * disable break condition and fifos + */ + pl011_shutdown_channel(uap, REG_LCRH_RX); + if (pl011_split_lcrh(uap)) + pl011_shutdown_channel(uap, REG_LCRH_TX); +} + +static void pl011_disable_interrupts(struct uart_amba_port *uap) +{ + spin_lock_irq(&uap->port.lock); + + /* mask all interrupts and clear all pending ones */ + uap->im = 0; + pl011_write(uap->im, uap, REG_IMSC); + pl011_write(0xffff, uap, REG_ICR); + + spin_unlock_irq(&uap->port.lock); +} + +static void pl011_shutdown(struct uart_port *port) +{ + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); + + pl011_disable_interrupts(uap); + + pl011_dma_shutdown(uap); + + free_irq(uap->port.irq, uap); + + pl011_disable_uart(uap); + + /* + * Shut down the clock producer + */ + clk_disable_unprepare(uap->clk); + /* Optionally let pins go into sleep states */ + pinctrl_pm_select_sleep_state(port->dev); + + if (dev_get_platdata(uap->port.dev)) { + struct amba_pl011_data *plat; + + plat = dev_get_platdata(uap->port.dev); + if (plat->exit) + plat->exit(); + } + + if (uap->port.ops->flush_buffer) + uap->port.ops->flush_buffer(port); +} + +static void sbsa_uart_shutdown(struct uart_port *port) +{ + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); + + pl011_disable_interrupts(uap); + + free_irq(uap->port.irq, uap); + + if (uap->port.ops->flush_buffer) + uap->port.ops->flush_buffer(port); +} + +static void +pl011_setup_status_masks(struct uart_port *port, struct ktermios *termios) +{ + port->read_status_mask = UART011_DR_OE | 255; + if (termios->c_iflag & INPCK) + port->read_status_mask |= UART011_DR_FE | UART011_DR_PE; + if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) + port->read_status_mask |= UART011_DR_BE; + + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= UART011_DR_FE | UART011_DR_PE; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= UART011_DR_BE; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= UART011_DR_OE; + } + + /* + * Ignore all characters if CREAD is not set. + */ + if ((termios->c_cflag & CREAD) == 0) + port->ignore_status_mask |= UART_DUMMY_DR_RX; +} + +static void +pl011_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); + unsigned int lcr_h, old_cr; + unsigned long flags; + unsigned int baud, quot, clkdiv; + + if (uap->vendor->oversampling) + clkdiv = 8; + else + clkdiv = 16; + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, + port->uartclk / clkdiv); +#ifdef CONFIG_DMA_ENGINE + /* + * Adjust RX DMA polling rate with baud rate if not specified. + */ + if (uap->dmarx.auto_poll_rate) + uap->dmarx.poll_rate = DIV_ROUND_UP(10000000, baud); +#endif + + if (baud > port->uartclk/16) + quot = DIV_ROUND_CLOSEST(port->uartclk * 8, baud); + else + quot = DIV_ROUND_CLOSEST(port->uartclk * 4, baud); + + switch (termios->c_cflag & CSIZE) { + case CS5: + lcr_h = UART01x_LCRH_WLEN_5; + break; + case CS6: + lcr_h = UART01x_LCRH_WLEN_6; + break; + case CS7: + lcr_h = UART01x_LCRH_WLEN_7; + break; + default: // CS8 + lcr_h = UART01x_LCRH_WLEN_8; + break; + } + if (termios->c_cflag & CSTOPB) + lcr_h |= UART01x_LCRH_STP2; + if (termios->c_cflag & PARENB) { + lcr_h |= UART01x_LCRH_PEN; + if (!(termios->c_cflag & PARODD)) + lcr_h |= UART01x_LCRH_EPS; + if (termios->c_cflag & CMSPAR) + lcr_h |= UART011_LCRH_SPS; + } + if (uap->fifosize > 1) + lcr_h |= UART01x_LCRH_FEN; + + spin_lock_irqsave(&port->lock, flags); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + pl011_setup_status_masks(port, termios); + + if (UART_ENABLE_MS(port, termios->c_cflag)) + pl011_enable_ms(port); + + /* first, disable everything */ + old_cr = pl011_read(uap, REG_CR); + pl011_write(0, uap, REG_CR); + + if (termios->c_cflag & CRTSCTS) { + if (old_cr & UART011_CR_RTS) + old_cr |= UART011_CR_RTSEN; + + old_cr |= UART011_CR_CTSEN; + port->status |= UPSTAT_AUTOCTS | UPSTAT_AUTORTS; + } else { + old_cr &= ~(UART011_CR_CTSEN | UART011_CR_RTSEN); + port->status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS); + } + + if (uap->vendor->oversampling) { + if (baud > port->uartclk / 16) + old_cr |= ST_UART011_CR_OVSFACT; + else + old_cr &= ~ST_UART011_CR_OVSFACT; + } + + /* + * Workaround for the ST Micro oversampling variants to + * increase the bitrate slightly, by lowering the divisor, + * to avoid delayed sampling of start bit at high speeds, + * else we see data corruption. + */ + if (uap->vendor->oversampling) { + if ((baud >= 3000000) && (baud < 3250000) && (quot > 1)) + quot -= 1; + else if ((baud > 3250000) && (quot > 2)) + quot -= 2; + } + /* Set baud rate */ + pl011_write(quot & 0x3f, uap, REG_FBRD); + pl011_write(quot >> 6, uap, REG_IBRD); + + /* + * ----------v----------v----------v----------v----- + * NOTE: REG_LCRH_TX and REG_LCRH_RX MUST BE WRITTEN AFTER + * REG_FBRD & REG_IBRD. + * ----------^----------^----------^----------^----- + */ + pl011_write_lcr_h(uap, lcr_h); + pl011_write(old_cr, uap, REG_CR); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void +sbsa_uart_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); + unsigned long flags; + + tty_termios_encode_baud_rate(termios, uap->fixed_baud, uap->fixed_baud); + + /* The SBSA UART only supports 8n1 without hardware flow control. */ + termios->c_cflag &= ~(CSIZE | CSTOPB | PARENB | PARODD); + termios->c_cflag &= ~(CMSPAR | CRTSCTS); + termios->c_cflag |= CS8 | CLOCAL; + + spin_lock_irqsave(&port->lock, flags); + uart_update_timeout(port, CS8, uap->fixed_baud); + pl011_setup_status_masks(port, termios); + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *pl011_type(struct uart_port *port) +{ + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); + return uap->port.type == PORT_AMBA ? uap->type : NULL; +} + +/* + * Configure/autoconfigure the port. + */ +static void pl011_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) + port->type = PORT_AMBA; +} + +/* + * verify the new serial_struct (for TIOCSSERIAL). + */ +static int pl011_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + int ret = 0; + if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMBA) + ret = -EINVAL; + if (ser->irq < 0 || ser->irq >= nr_irqs) + ret = -EINVAL; + if (ser->baud_base < 9600) + ret = -EINVAL; + if (port->mapbase != (unsigned long) ser->iomem_base) + ret = -EINVAL; + return ret; +} + +static const struct uart_ops amba_pl011_pops = { + .tx_empty = pl011_tx_empty, + .set_mctrl = pl011_set_mctrl, + .get_mctrl = pl011_get_mctrl, + .stop_tx = pl011_stop_tx, + .start_tx = pl011_start_tx, + .stop_rx = pl011_stop_rx, + .throttle = pl011_throttle_rx, + .unthrottle = pl011_unthrottle_rx, + .enable_ms = pl011_enable_ms, + .break_ctl = pl011_break_ctl, + .startup = pl011_startup, + .shutdown = pl011_shutdown, + .flush_buffer = pl011_dma_flush_buffer, + .set_termios = pl011_set_termios, + .type = pl011_type, + .config_port = pl011_config_port, + .verify_port = pl011_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_init = pl011_hwinit, + .poll_get_char = pl011_get_poll_char, + .poll_put_char = pl011_put_poll_char, +#endif +}; + +static void sbsa_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} + +static unsigned int sbsa_uart_get_mctrl(struct uart_port *port) +{ + return 0; +} + +static const struct uart_ops sbsa_uart_pops = { + .tx_empty = pl011_tx_empty, + .set_mctrl = sbsa_uart_set_mctrl, + .get_mctrl = sbsa_uart_get_mctrl, + .stop_tx = pl011_stop_tx, + .start_tx = pl011_start_tx, + .stop_rx = pl011_stop_rx, + .startup = sbsa_uart_startup, + .shutdown = sbsa_uart_shutdown, + .set_termios = sbsa_uart_set_termios, + .type = pl011_type, + .config_port = pl011_config_port, + .verify_port = pl011_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_init = pl011_hwinit, + .poll_get_char = pl011_get_poll_char, + .poll_put_char = pl011_put_poll_char, +#endif +}; + +static struct uart_amba_port *amba_ports[UART_NR]; + +#ifdef CONFIG_SERIAL_AMBA_PL011_CONSOLE + +static void pl011_console_putchar(struct uart_port *port, int ch) +{ + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); + + while (pl011_read(uap, REG_FR) & UART01x_FR_TXFF) + cpu_relax(); + pl011_write(ch, uap, REG_DR); +} + +static void +pl011_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_amba_port *uap = amba_ports[co->index]; + unsigned int old_cr = 0, new_cr; + unsigned long flags; + int locked = 1; + + clk_enable(uap->clk); + + local_irq_save(flags); + if (uap->port.sysrq) + locked = 0; + else if (oops_in_progress) + locked = spin_trylock(&uap->port.lock); + else + spin_lock(&uap->port.lock); + + /* + * First save the CR then disable the interrupts + */ + if (!uap->vendor->always_enabled) { + old_cr = pl011_read(uap, REG_CR); + new_cr = old_cr & ~UART011_CR_CTSEN; + new_cr |= UART01x_CR_UARTEN | UART011_CR_TXE; + pl011_write(new_cr, uap, REG_CR); + } + + uart_console_write(&uap->port, s, count, pl011_console_putchar); + + /* + * Finally, wait for transmitter to become empty and restore the + * TCR. Allow feature register bits to be inverted to work around + * errata. + */ + while ((pl011_read(uap, REG_FR) ^ uap->vendor->inv_fr) + & uap->vendor->fr_busy) + cpu_relax(); + if (!uap->vendor->always_enabled) + pl011_write(old_cr, uap, REG_CR); + + if (locked) + spin_unlock(&uap->port.lock); + local_irq_restore(flags); + + clk_disable(uap->clk); +} + +static void pl011_console_get_options(struct uart_amba_port *uap, int *baud, + int *parity, int *bits) +{ + if (pl011_read(uap, REG_CR) & UART01x_CR_UARTEN) { + unsigned int lcr_h, ibrd, fbrd; + + lcr_h = pl011_read(uap, REG_LCRH_TX); + + *parity = 'n'; + if (lcr_h & UART01x_LCRH_PEN) { + if (lcr_h & UART01x_LCRH_EPS) + *parity = 'e'; + else + *parity = 'o'; + } + + if ((lcr_h & 0x60) == UART01x_LCRH_WLEN_7) + *bits = 7; + else + *bits = 8; + + ibrd = pl011_read(uap, REG_IBRD); + fbrd = pl011_read(uap, REG_FBRD); + + *baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd); + + if (uap->vendor->oversampling) { + if (pl011_read(uap, REG_CR) + & ST_UART011_CR_OVSFACT) + *baud *= 2; + } + } +} + +static int pl011_console_setup(struct console *co, char *options) +{ + struct uart_amba_port *uap; + int baud = 38400; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + int ret; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= UART_NR) + co->index = 0; + uap = amba_ports[co->index]; + if (!uap) + return -ENODEV; + + /* Allow pins to be muxed in and configured */ + pinctrl_pm_select_default_state(uap->port.dev); + + ret = clk_prepare(uap->clk); + if (ret) + return ret; + + if (dev_get_platdata(uap->port.dev)) { + struct amba_pl011_data *plat; + + plat = dev_get_platdata(uap->port.dev); + if (plat->init) + plat->init(); + } + + uap->port.uartclk = clk_get_rate(uap->clk); + + if (uap->vendor->fixed_options) { + baud = uap->fixed_baud; + } else { + if (options) + uart_parse_options(options, + &baud, &parity, &bits, &flow); + else + pl011_console_get_options(uap, &baud, &parity, &bits); + } + + return uart_set_options(&uap->port, co, baud, parity, bits, flow); +} + +/** + * pl011_console_match - non-standard console matching + * @co: registering console + * @name: name from console command line + * @idx: index from console command line + * @options: ptr to option string from console command line + * + * Only attempts to match console command lines of the form: + * console=pl011,mmio|mmio32,[,] + * console=pl011,0x[,] + * This form is used to register an initial earlycon boot console and + * replace it with the amba_console at pl011 driver init. + * + * Performs console setup for a match (as required by interface) + * If no are specified, then assume the h/w is already setup. + * + * Returns 0 if console matches; otherwise non-zero to use default matching + */ +static int pl011_console_match(struct console *co, char *name, int idx, + char *options) +{ + unsigned char iotype; + resource_size_t addr; + int i; + + /* + * Systems affected by the Qualcomm Technologies QDF2400 E44 erratum + * have a distinct console name, so make sure we check for that. + * The actual implementation of the erratum occurs in the probe + * function. + */ + if ((strcmp(name, "qdf2400_e44") != 0) && (strcmp(name, "pl011") != 0)) + return -ENODEV; + + if (uart_parse_earlycon(options, &iotype, &addr, &options)) + return -ENODEV; + + if (iotype != UPIO_MEM && iotype != UPIO_MEM32) + return -ENODEV; + + /* try to match the port specified on the command line */ + for (i = 0; i < ARRAY_SIZE(amba_ports); i++) { + struct uart_port *port; + + if (!amba_ports[i]) + continue; + + port = &amba_ports[i]->port; + + if (port->mapbase != addr) + continue; + + co->index = i; + port->cons = co; + return pl011_console_setup(co, options); + } + + return -ENODEV; +} + +static struct uart_driver amba_reg; +static struct console amba_console = { + .name = "ttyAMA", + .write = pl011_console_write, + .device = uart_console_device, + .setup = pl011_console_setup, + .match = pl011_console_match, + .flags = CON_PRINTBUFFER | CON_ANYTIME, + .index = -1, + .data = &amba_reg, +}; + +#define AMBA_CONSOLE (&amba_console) + +static void qdf2400_e44_putc(struct uart_port *port, int c) +{ + while (readl(port->membase + UART01x_FR) & UART01x_FR_TXFF) + cpu_relax(); + writel(c, port->membase + UART01x_DR); + while (!(readl(port->membase + UART01x_FR) & UART011_FR_TXFE)) + cpu_relax(); +} + +static void qdf2400_e44_early_write(struct console *con, const char *s, unsigned n) +{ + struct earlycon_device *dev = con->data; + + uart_console_write(&dev->port, s, n, qdf2400_e44_putc); +} + +static void pl011_putc(struct uart_port *port, int c) +{ + while (readl(port->membase + UART01x_FR) & UART01x_FR_TXFF) + cpu_relax(); + if (port->iotype == UPIO_MEM32) + writel(c, port->membase + UART01x_DR); + else + writeb(c, port->membase + UART01x_DR); + while (readl(port->membase + UART01x_FR) & UART01x_FR_BUSY) + cpu_relax(); +} + +static void pl011_early_write(struct console *con, const char *s, unsigned n) +{ + struct earlycon_device *dev = con->data; + + uart_console_write(&dev->port, s, n, pl011_putc); +} + +#ifdef CONFIG_CONSOLE_POLL +static int pl011_getc(struct uart_port *port) +{ + if (readl(port->membase + UART01x_FR) & UART01x_FR_RXFE) + return NO_POLL_CHAR; + + if (port->iotype == UPIO_MEM32) + return readl(port->membase + UART01x_DR); + else + return readb(port->membase + UART01x_DR); +} + +static int pl011_early_read(struct console *con, char *s, unsigned int n) +{ + struct earlycon_device *dev = con->data; + int ch, num_read = 0; + + while (num_read < n) { + ch = pl011_getc(&dev->port); + if (ch == NO_POLL_CHAR) + break; + + s[num_read++] = ch; + } + + return num_read; +} +#else +#define pl011_early_read NULL +#endif + +/* + * On non-ACPI systems, earlycon is enabled by specifying + * "earlycon=pl011,

" on the kernel command line. + * + * On ACPI ARM64 systems, an "early" console is enabled via the SPCR table, + * by specifying only "earlycon" on the command line. Because it requires + * SPCR, the console starts after ACPI is parsed, which is later than a + * traditional early console. + * + * To get the traditional early console that starts before ACPI is parsed, + * specify the full "earlycon=pl011,
" option. + */ +static int __init pl011_early_console_setup(struct earlycon_device *device, + const char *opt) +{ + if (!device->port.membase) + return -ENODEV; + + device->con->write = pl011_early_write; + device->con->read = pl011_early_read; + + return 0; +} +OF_EARLYCON_DECLARE(pl011, "arm,pl011", pl011_early_console_setup); +OF_EARLYCON_DECLARE(pl011, "arm,sbsa-uart", pl011_early_console_setup); + +/* + * On Qualcomm Datacenter Technologies QDF2400 SOCs affected by + * Erratum 44, traditional earlycon can be enabled by specifying + * "earlycon=qdf2400_e44,
". Any options are ignored. + * + * Alternatively, you can just specify "earlycon", and the early console + * will be enabled with the information from the SPCR table. In this + * case, the SPCR code will detect the need for the E44 work-around, + * and set the console name to "qdf2400_e44". + */ +static int __init +qdf2400_e44_early_console_setup(struct earlycon_device *device, + const char *opt) +{ + if (!device->port.membase) + return -ENODEV; + + device->con->write = qdf2400_e44_early_write; + return 0; +} +EARLYCON_DECLARE(qdf2400_e44, qdf2400_e44_early_console_setup); + +#else +#define AMBA_CONSOLE NULL +#endif + +static struct uart_driver amba_reg = { + .owner = THIS_MODULE, + .driver_name = "ttyAMA", + .dev_name = "ttyAMA", + .major = SERIAL_AMBA_MAJOR, + .minor = SERIAL_AMBA_MINOR, + .nr = UART_NR, + .cons = AMBA_CONSOLE, +}; + +static int pl011_probe_dt_alias(int index, struct device *dev) +{ + struct device_node *np; + static bool seen_dev_with_alias = false; + static bool seen_dev_without_alias = false; + int ret = index; + + if (!IS_ENABLED(CONFIG_OF)) + return ret; + + np = dev->of_node; + if (!np) + return ret; + + ret = of_alias_get_id(np, "serial"); + if (ret < 0) { + seen_dev_without_alias = true; + ret = index; + } else { + seen_dev_with_alias = true; + if (ret >= ARRAY_SIZE(amba_ports) || amba_ports[ret] != NULL) { + dev_warn(dev, "requested serial port %d not available.\n", ret); + ret = index; + } + } + + if (seen_dev_with_alias && seen_dev_without_alias) + dev_warn(dev, "aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable.\n"); + + return ret; +} + +/* unregisters the driver also if no more ports are left */ +static void pl011_unregister_port(struct uart_amba_port *uap) +{ + int i; + bool busy = false; + + for (i = 0; i < ARRAY_SIZE(amba_ports); i++) { + if (amba_ports[i] == uap) + amba_ports[i] = NULL; + else if (amba_ports[i]) + busy = true; + } + pl011_dma_remove(uap); + if (!busy) + uart_unregister_driver(&amba_reg); +} + +static int pl011_find_free_port(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(amba_ports); i++) + if (amba_ports[i] == NULL) + return i; + + return -EBUSY; +} + +static int pl011_setup_port(struct device *dev, struct uart_amba_port *uap, + struct resource *mmiobase, int index) +{ + void __iomem *base; + + base = devm_ioremap_resource(dev, mmiobase); + if (IS_ERR(base)) + return PTR_ERR(base); + + index = pl011_probe_dt_alias(index, dev); + + uap->old_cr = 0; + uap->port.dev = dev; + uap->port.mapbase = mmiobase->start; + uap->port.membase = base; + uap->port.fifosize = uap->fifosize; + uap->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_AMBA_PL011_CONSOLE); + uap->port.flags = UPF_BOOT_AUTOCONF; + uap->port.line = index; + + amba_ports[index] = uap; + + return 0; +} + +static int pl011_register_port(struct uart_amba_port *uap) +{ + int ret, i; + + /* Ensure interrupts from this UART are masked and cleared */ + pl011_write(0, uap, REG_IMSC); + pl011_write(0xffff, uap, REG_ICR); + + if (!amba_reg.state) { + ret = uart_register_driver(&amba_reg); + if (ret < 0) { + dev_err(uap->port.dev, + "Failed to register AMBA-PL011 driver\n"); + for (i = 0; i < ARRAY_SIZE(amba_ports); i++) + if (amba_ports[i] == uap) + amba_ports[i] = NULL; + return ret; + } + } + + ret = uart_add_one_port(&amba_reg, &uap->port); + if (ret) + pl011_unregister_port(uap); + + return ret; +} + +static int pl011_probe(struct amba_device *dev, const struct amba_id *id) +{ + struct uart_amba_port *uap; + struct vendor_data *vendor = id->data; + int portnr, ret; + + portnr = pl011_find_free_port(); + if (portnr < 0) + return portnr; + + uap = devm_kzalloc(&dev->dev, sizeof(struct uart_amba_port), + GFP_KERNEL); + if (!uap) + return -ENOMEM; + + uap->clk = devm_clk_get(&dev->dev, NULL); + if (IS_ERR(uap->clk)) + return PTR_ERR(uap->clk); + + uap->reg_offset = vendor->reg_offset; + uap->vendor = vendor; + uap->fifosize = vendor->get_fifosize(dev); + uap->port.iotype = vendor->access_32b ? UPIO_MEM32 : UPIO_MEM; + uap->port.irq = dev->irq[0]; + uap->port.ops = &amba_pl011_pops; + + snprintf(uap->type, sizeof(uap->type), "PL011 rev%u", amba_rev(dev)); + + ret = pl011_setup_port(&dev->dev, uap, &dev->res, portnr); + if (ret) + return ret; + + amba_set_drvdata(dev, uap); + + return pl011_register_port(uap); +} + +static void pl011_remove(struct amba_device *dev) +{ + struct uart_amba_port *uap = amba_get_drvdata(dev); + + uart_remove_one_port(&amba_reg, &uap->port); + pl011_unregister_port(uap); +} + +#ifdef CONFIG_PM_SLEEP +static int pl011_suspend(struct device *dev) +{ + struct uart_amba_port *uap = dev_get_drvdata(dev); + + if (!uap) + return -EINVAL; + + return uart_suspend_port(&amba_reg, &uap->port); +} + +static int pl011_resume(struct device *dev) +{ + struct uart_amba_port *uap = dev_get_drvdata(dev); + + if (!uap) + return -EINVAL; + + return uart_resume_port(&amba_reg, &uap->port); +} +#endif + +static SIMPLE_DEV_PM_OPS(pl011_dev_pm_ops, pl011_suspend, pl011_resume); + +static int sbsa_uart_probe(struct platform_device *pdev) +{ + struct uart_amba_port *uap; + struct resource *r; + int portnr, ret; + int baudrate; + + /* + * Check the mandatory baud rate parameter in the DT node early + * so that we can easily exit with the error. + */ + if (pdev->dev.of_node) { + struct device_node *np = pdev->dev.of_node; + + ret = of_property_read_u32(np, "current-speed", &baudrate); + if (ret) + return ret; + } else { + baudrate = 115200; + } + + portnr = pl011_find_free_port(); + if (portnr < 0) + return portnr; + + uap = devm_kzalloc(&pdev->dev, sizeof(struct uart_amba_port), + GFP_KERNEL); + if (!uap) + return -ENOMEM; + + ret = platform_get_irq(pdev, 0); + if (ret < 0) + return ret; + uap->port.irq = ret; + +#ifdef CONFIG_ACPI_SPCR_TABLE + if (qdf2400_e44_present) { + dev_info(&pdev->dev, "working around QDF2400 SoC erratum 44\n"); + uap->vendor = &vendor_qdt_qdf2400_e44; + } else +#endif + uap->vendor = &vendor_sbsa; + + uap->reg_offset = uap->vendor->reg_offset; + uap->fifosize = 32; + uap->port.iotype = uap->vendor->access_32b ? UPIO_MEM32 : UPIO_MEM; + uap->port.ops = &sbsa_uart_pops; + uap->fixed_baud = baudrate; + + snprintf(uap->type, sizeof(uap->type), "SBSA"); + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + ret = pl011_setup_port(&pdev->dev, uap, r, portnr); + if (ret) + return ret; + + platform_set_drvdata(pdev, uap); + + return pl011_register_port(uap); +} + +static int sbsa_uart_remove(struct platform_device *pdev) +{ + struct uart_amba_port *uap = platform_get_drvdata(pdev); + + uart_remove_one_port(&amba_reg, &uap->port); + pl011_unregister_port(uap); + return 0; +} + +static const struct of_device_id sbsa_uart_of_match[] = { + { .compatible = "arm,sbsa-uart", }, + {}, +}; +MODULE_DEVICE_TABLE(of, sbsa_uart_of_match); + +static const struct acpi_device_id sbsa_uart_acpi_match[] = { + { "ARMH0011", 0 }, + { "ARMHB000", 0 }, + {}, +}; +MODULE_DEVICE_TABLE(acpi, sbsa_uart_acpi_match); + +static struct platform_driver arm_sbsa_uart_platform_driver = { + .probe = sbsa_uart_probe, + .remove = sbsa_uart_remove, + .driver = { + .name = "sbsa-uart", + .pm = &pl011_dev_pm_ops, + .of_match_table = of_match_ptr(sbsa_uart_of_match), + .acpi_match_table = ACPI_PTR(sbsa_uart_acpi_match), + .suppress_bind_attrs = IS_BUILTIN(CONFIG_SERIAL_AMBA_PL011), + }, +}; + +static const struct amba_id pl011_ids[] = { + { + .id = 0x00041011, + .mask = 0x000fffff, + .data = &vendor_arm, + }, + { + .id = 0x00380802, + .mask = 0x00ffffff, + .data = &vendor_st, + }, + { + .id = AMBA_LINUX_ID(0x00, 0x1, 0xffe), + .mask = 0x00ffffff, + .data = &vendor_zte, + }, + { 0, 0 }, +}; + +MODULE_DEVICE_TABLE(amba, pl011_ids); + +static struct amba_driver pl011_driver = { + .drv = { + .name = "uart-pl011", + .pm = &pl011_dev_pm_ops, + .suppress_bind_attrs = IS_BUILTIN(CONFIG_SERIAL_AMBA_PL011), + }, + .id_table = pl011_ids, + .probe = pl011_probe, + .remove = pl011_remove, +}; + +static int __init pl011_init(void) +{ + printk(KERN_INFO "Serial: AMBA PL011 UART driver\n"); + + if (platform_driver_register(&arm_sbsa_uart_platform_driver)) + pr_warn("could not register SBSA UART platform driver\n"); + return amba_driver_register(&pl011_driver); +} + +static void __exit pl011_exit(void) +{ + platform_driver_unregister(&arm_sbsa_uart_platform_driver); + amba_driver_unregister(&pl011_driver); +} + +/* + * While this can be a module, if builtin it's most likely the console + * So let's leave module_exit but move module_init to an earlier place + */ +arch_initcall(pl011_init); +module_exit(pl011_exit); + +MODULE_AUTHOR("ARM Ltd/Deep Blue Solutions Ltd"); +MODULE_DESCRIPTION("ARM AMBA serial port driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/amba-pl011.h b/drivers/tty/serial/amba-pl011.h new file mode 100644 index 000000000..077eb12a3 --- /dev/null +++ b/drivers/tty/serial/amba-pl011.h @@ -0,0 +1,35 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef AMBA_PL011_H +#define AMBA_PL011_H + +enum { + REG_DR, + REG_ST_DMAWM, + REG_ST_TIMEOUT, + REG_FR, + REG_LCRH_RX, + REG_LCRH_TX, + REG_IBRD, + REG_FBRD, + REG_CR, + REG_IFLS, + REG_IMSC, + REG_RIS, + REG_MIS, + REG_ICR, + REG_DMACR, + REG_ST_XFCR, + REG_ST_XON1, + REG_ST_XON2, + REG_ST_XOFF1, + REG_ST_XOFF2, + REG_ST_ITCR, + REG_ST_ITIP, + REG_ST_ABCR, + REG_ST_ABIMSC, + + /* The size of the array - must be last */ + REG_ARRAY_SIZE, +}; + +#endif diff --git a/drivers/tty/serial/apbuart.c b/drivers/tty/serial/apbuart.c new file mode 100644 index 000000000..e8d56e899 --- /dev/null +++ b/drivers/tty/serial/apbuart.c @@ -0,0 +1,690 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for GRLIB serial ports (APBUART) + * + * Based on linux/drivers/serial/amba.c + * + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * Copyright (C) 2003 Konrad Eisele + * Copyright (C) 2006 Daniel Hellstrom , Aeroflex Gaisler AB + * Copyright (C) 2008 Gilead Kutnick + * Copyright (C) 2009 Kristoffer Glembo , Aeroflex Gaisler AB + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "apbuart.h" + +#define SERIAL_APBUART_MAJOR TTY_MAJOR +#define SERIAL_APBUART_MINOR 64 +#define UART_DUMMY_RSR_RX 0x8000 /* for ignore all read */ + +static void apbuart_tx_chars(struct uart_port *port); + +static void apbuart_stop_tx(struct uart_port *port) +{ + unsigned int cr; + + cr = UART_GET_CTRL(port); + cr &= ~UART_CTRL_TI; + UART_PUT_CTRL(port, cr); +} + +static void apbuart_start_tx(struct uart_port *port) +{ + unsigned int cr; + + cr = UART_GET_CTRL(port); + cr |= UART_CTRL_TI; + UART_PUT_CTRL(port, cr); + + if (UART_GET_STATUS(port) & UART_STATUS_THE) + apbuart_tx_chars(port); +} + +static void apbuart_stop_rx(struct uart_port *port) +{ + unsigned int cr; + + cr = UART_GET_CTRL(port); + cr &= ~(UART_CTRL_RI); + UART_PUT_CTRL(port, cr); +} + +static void apbuart_rx_chars(struct uart_port *port) +{ + unsigned int status, ch, rsr, flag; + unsigned int max_chars = port->fifosize; + + status = UART_GET_STATUS(port); + + while (UART_RX_DATA(status) && (max_chars--)) { + + ch = UART_GET_CHAR(port); + flag = TTY_NORMAL; + + port->icount.rx++; + + rsr = UART_GET_STATUS(port) | UART_DUMMY_RSR_RX; + UART_PUT_STATUS(port, 0); + if (rsr & UART_STATUS_ERR) { + + if (rsr & UART_STATUS_BR) { + rsr &= ~(UART_STATUS_FE | UART_STATUS_PE); + port->icount.brk++; + if (uart_handle_break(port)) + goto ignore_char; + } else if (rsr & UART_STATUS_PE) { + port->icount.parity++; + } else if (rsr & UART_STATUS_FE) { + port->icount.frame++; + } + if (rsr & UART_STATUS_OE) + port->icount.overrun++; + + rsr &= port->read_status_mask; + + if (rsr & UART_STATUS_PE) + flag = TTY_PARITY; + else if (rsr & UART_STATUS_FE) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(port, ch)) + goto ignore_char; + + uart_insert_char(port, rsr, UART_STATUS_OE, ch, flag); + + + ignore_char: + status = UART_GET_STATUS(port); + } + + spin_unlock(&port->lock); + tty_flip_buffer_push(&port->state->port); + spin_lock(&port->lock); +} + +static void apbuart_tx_chars(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + int count; + + if (port->x_char) { + UART_PUT_CHAR(port, port->x_char); + port->icount.tx++; + port->x_char = 0; + return; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + apbuart_stop_tx(port); + return; + } + + /* amba: fill FIFO */ + count = port->fifosize >> 1; + do { + UART_PUT_CHAR(port, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + apbuart_stop_tx(port); +} + +static irqreturn_t apbuart_int(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + unsigned int status; + + spin_lock(&port->lock); + + status = UART_GET_STATUS(port); + if (status & UART_STATUS_DR) + apbuart_rx_chars(port); + if (status & UART_STATUS_THE) + apbuart_tx_chars(port); + + spin_unlock(&port->lock); + + return IRQ_HANDLED; +} + +static unsigned int apbuart_tx_empty(struct uart_port *port) +{ + unsigned int status = UART_GET_STATUS(port); + return status & UART_STATUS_THE ? TIOCSER_TEMT : 0; +} + +static unsigned int apbuart_get_mctrl(struct uart_port *port) +{ + /* The GRLIB APBUART handles flow control in hardware */ + return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; +} + +static void apbuart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + /* The GRLIB APBUART handles flow control in hardware */ +} + +static void apbuart_break_ctl(struct uart_port *port, int break_state) +{ + /* We don't support sending break */ +} + +static int apbuart_startup(struct uart_port *port) +{ + int retval; + unsigned int cr; + + /* Allocate the IRQ */ + retval = request_irq(port->irq, apbuart_int, 0, "apbuart", port); + if (retval) + return retval; + + /* Finally, enable interrupts */ + cr = UART_GET_CTRL(port); + UART_PUT_CTRL(port, + cr | UART_CTRL_RE | UART_CTRL_TE | + UART_CTRL_RI | UART_CTRL_TI); + + return 0; +} + +static void apbuart_shutdown(struct uart_port *port) +{ + unsigned int cr; + + /* disable all interrupts, disable the port */ + cr = UART_GET_CTRL(port); + UART_PUT_CTRL(port, + cr & ~(UART_CTRL_RE | UART_CTRL_TE | + UART_CTRL_RI | UART_CTRL_TI)); + + /* Free the interrupt */ + free_irq(port->irq, port); +} + +static void apbuart_set_termios(struct uart_port *port, + struct ktermios *termios, struct ktermios *old) +{ + unsigned int cr; + unsigned long flags; + unsigned int baud, quot; + + /* Ask the core to calculate the divisor for us. */ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); + if (baud == 0) + panic("invalid baudrate %i\n", port->uartclk / 16); + + /* uart_get_divisor calc a *16 uart freq, apbuart is *8 */ + quot = (uart_get_divisor(port, baud)) * 2; + cr = UART_GET_CTRL(port); + cr &= ~(UART_CTRL_PE | UART_CTRL_PS); + + if (termios->c_cflag & PARENB) { + cr |= UART_CTRL_PE; + if ((termios->c_cflag & PARODD)) + cr |= UART_CTRL_PS; + } + + /* Enable flow control. */ + if (termios->c_cflag & CRTSCTS) + cr |= UART_CTRL_FL; + + spin_lock_irqsave(&port->lock, flags); + + /* Update the per-port timeout. */ + uart_update_timeout(port, termios->c_cflag, baud); + + port->read_status_mask = UART_STATUS_OE; + if (termios->c_iflag & INPCK) + port->read_status_mask |= UART_STATUS_FE | UART_STATUS_PE; + + /* Characters to ignore */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= UART_STATUS_FE | UART_STATUS_PE; + + /* Ignore all characters if CREAD is not set. */ + if ((termios->c_cflag & CREAD) == 0) + port->ignore_status_mask |= UART_DUMMY_RSR_RX; + + /* Set baud rate */ + quot -= 1; + UART_PUT_SCAL(port, quot); + UART_PUT_CTRL(port, cr); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *apbuart_type(struct uart_port *port) +{ + return port->type == PORT_APBUART ? "GRLIB/APBUART" : NULL; +} + +static void apbuart_release_port(struct uart_port *port) +{ + release_mem_region(port->mapbase, 0x100); +} + +static int apbuart_request_port(struct uart_port *port) +{ + return request_mem_region(port->mapbase, 0x100, "grlib-apbuart") + != NULL ? 0 : -EBUSY; + return 0; +} + +/* Configure/autoconfigure the port */ +static void apbuart_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_APBUART; + apbuart_request_port(port); + } +} + +/* Verify the new serial_struct (for TIOCSSERIAL) */ +static int apbuart_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + int ret = 0; + if (ser->type != PORT_UNKNOWN && ser->type != PORT_APBUART) + ret = -EINVAL; + if (ser->irq < 0 || ser->irq >= NR_IRQS) + ret = -EINVAL; + if (ser->baud_base < 9600) + ret = -EINVAL; + return ret; +} + +static const struct uart_ops grlib_apbuart_ops = { + .tx_empty = apbuart_tx_empty, + .set_mctrl = apbuart_set_mctrl, + .get_mctrl = apbuart_get_mctrl, + .stop_tx = apbuart_stop_tx, + .start_tx = apbuart_start_tx, + .stop_rx = apbuart_stop_rx, + .break_ctl = apbuart_break_ctl, + .startup = apbuart_startup, + .shutdown = apbuart_shutdown, + .set_termios = apbuart_set_termios, + .type = apbuart_type, + .release_port = apbuart_release_port, + .request_port = apbuart_request_port, + .config_port = apbuart_config_port, + .verify_port = apbuart_verify_port, +}; + +static struct uart_port grlib_apbuart_ports[UART_NR]; +static struct device_node *grlib_apbuart_nodes[UART_NR]; + +static int apbuart_scan_fifo_size(struct uart_port *port, int portnumber) +{ + int ctrl, loop = 0; + int status; + int fifosize; + unsigned long flags; + + ctrl = UART_GET_CTRL(port); + + /* + * Enable the transceiver and wait for it to be ready to send data. + * Clear interrupts so that this process will not be externally + * interrupted in the middle (which can cause the transceiver to + * drain prematurely). + */ + + local_irq_save(flags); + + UART_PUT_CTRL(port, ctrl | UART_CTRL_TE); + + while (!UART_TX_READY(UART_GET_STATUS(port))) + loop++; + + /* + * Disable the transceiver so data isn't actually sent during the + * actual test. + */ + + UART_PUT_CTRL(port, ctrl & ~(UART_CTRL_TE)); + + fifosize = 1; + UART_PUT_CHAR(port, 0); + + /* + * So long as transmitting a character increments the tranceivier FIFO + * length the FIFO must be at least that big. These bytes will + * automatically drain off of the FIFO. + */ + + status = UART_GET_STATUS(port); + while (((status >> 20) & 0x3F) == fifosize) { + fifosize++; + UART_PUT_CHAR(port, 0); + status = UART_GET_STATUS(port); + } + + fifosize--; + + UART_PUT_CTRL(port, ctrl); + local_irq_restore(flags); + + if (fifosize == 0) + fifosize = 1; + + return fifosize; +} + +static void apbuart_flush_fifo(struct uart_port *port) +{ + int i; + + for (i = 0; i < port->fifosize; i++) + UART_GET_CHAR(port); +} + + +/* ======================================================================== */ +/* Console driver, if enabled */ +/* ======================================================================== */ + +#ifdef CONFIG_SERIAL_GRLIB_GAISLER_APBUART_CONSOLE + +static void apbuart_console_putchar(struct uart_port *port, int ch) +{ + unsigned int status; + do { + status = UART_GET_STATUS(port); + } while (!UART_TX_READY(status)); + UART_PUT_CHAR(port, ch); +} + +static void +apbuart_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_port *port = &grlib_apbuart_ports[co->index]; + unsigned int status, old_cr, new_cr; + + /* First save the CR then disable the interrupts */ + old_cr = UART_GET_CTRL(port); + new_cr = old_cr & ~(UART_CTRL_RI | UART_CTRL_TI); + UART_PUT_CTRL(port, new_cr); + + uart_console_write(port, s, count, apbuart_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the TCR + */ + do { + status = UART_GET_STATUS(port); + } while (!UART_TX_READY(status)); + UART_PUT_CTRL(port, old_cr); +} + +static void __init +apbuart_console_get_options(struct uart_port *port, int *baud, + int *parity, int *bits) +{ + if (UART_GET_CTRL(port) & (UART_CTRL_RE | UART_CTRL_TE)) { + + unsigned int quot, status; + status = UART_GET_STATUS(port); + + *parity = 'n'; + if (status & UART_CTRL_PE) { + if ((status & UART_CTRL_PS) == 0) + *parity = 'e'; + else + *parity = 'o'; + } + + *bits = 8; + quot = UART_GET_SCAL(port) / 8; + *baud = port->uartclk / (16 * (quot + 1)); + } +} + +static int __init apbuart_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 38400; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + pr_debug("apbuart_console_setup co=%p, co->index=%i, options=%s\n", + co, co->index, options); + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= grlib_apbuart_port_nr) + co->index = 0; + + port = &grlib_apbuart_ports[co->index]; + + spin_lock_init(&port->lock); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + apbuart_console_get_options(port, &baud, &parity, &bits); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver grlib_apbuart_driver; + +static struct console grlib_apbuart_console = { + .name = "ttyS", + .write = apbuart_console_write, + .device = uart_console_device, + .setup = apbuart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &grlib_apbuart_driver, +}; + + +static int grlib_apbuart_configure(void); + +static int __init apbuart_console_init(void) +{ + if (grlib_apbuart_configure()) + return -ENODEV; + register_console(&grlib_apbuart_console); + return 0; +} + +console_initcall(apbuart_console_init); + +#define APBUART_CONSOLE (&grlib_apbuart_console) +#else +#define APBUART_CONSOLE NULL +#endif + +static struct uart_driver grlib_apbuart_driver = { + .owner = THIS_MODULE, + .driver_name = "serial", + .dev_name = "ttyS", + .major = SERIAL_APBUART_MAJOR, + .minor = SERIAL_APBUART_MINOR, + .nr = UART_NR, + .cons = APBUART_CONSOLE, +}; + + +/* ======================================================================== */ +/* OF Platform Driver */ +/* ======================================================================== */ + +static int apbuart_probe(struct platform_device *op) +{ + int i; + struct uart_port *port = NULL; + + for (i = 0; i < grlib_apbuart_port_nr; i++) { + if (op->dev.of_node == grlib_apbuart_nodes[i]) + break; + } + + port = &grlib_apbuart_ports[i]; + port->dev = &op->dev; + port->irq = op->archdata.irqs[0]; + + uart_add_one_port(&grlib_apbuart_driver, (struct uart_port *) port); + + apbuart_flush_fifo((struct uart_port *) port); + + printk(KERN_INFO "grlib-apbuart at 0x%llx, irq %d\n", + (unsigned long long) port->mapbase, port->irq); + return 0; +} + +static const struct of_device_id apbuart_match[] = { + { + .name = "GAISLER_APBUART", + }, + { + .name = "01_00c", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, apbuart_match); + +static struct platform_driver grlib_apbuart_of_driver = { + .probe = apbuart_probe, + .driver = { + .name = "grlib-apbuart", + .of_match_table = apbuart_match, + }, +}; + + +static int __init grlib_apbuart_configure(void) +{ + struct device_node *np; + int line = 0; + + for_each_matching_node(np, apbuart_match) { + const int *ampopts; + const u32 *freq_hz; + const struct amba_prom_registers *regs; + struct uart_port *port; + unsigned long addr; + + ampopts = of_get_property(np, "ampopts", NULL); + if (ampopts && (*ampopts == 0)) + continue; /* Ignore if used by another OS instance */ + regs = of_get_property(np, "reg", NULL); + /* Frequency of APB Bus is frequency of UART */ + freq_hz = of_get_property(np, "freq", NULL); + + if (!regs || !freq_hz || (*freq_hz == 0)) + continue; + + grlib_apbuart_nodes[line] = np; + + addr = regs->phys_addr; + + port = &grlib_apbuart_ports[line]; + + port->mapbase = addr; + port->membase = ioremap(addr, sizeof(struct grlib_apbuart_regs_map)); + port->irq = 0; + port->iotype = UPIO_MEM; + port->ops = &grlib_apbuart_ops; + port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_GRLIB_GAISLER_APBUART_CONSOLE); + port->flags = UPF_BOOT_AUTOCONF; + port->line = line; + port->uartclk = *freq_hz; + port->fifosize = apbuart_scan_fifo_size((struct uart_port *) port, line); + line++; + + /* We support maximum UART_NR uarts ... */ + if (line == UART_NR) + break; + } + + grlib_apbuart_driver.nr = grlib_apbuart_port_nr = line; + return line ? 0 : -ENODEV; +} + +static int __init grlib_apbuart_init(void) +{ + int ret; + + /* Find all APBUARTS in device the tree and initialize their ports */ + ret = grlib_apbuart_configure(); + if (ret) + return ret; + + printk(KERN_INFO "Serial: GRLIB APBUART driver\n"); + + ret = uart_register_driver(&grlib_apbuart_driver); + + if (ret) { + printk(KERN_ERR "%s: uart_register_driver failed (%i)\n", + __FILE__, ret); + return ret; + } + + ret = platform_driver_register(&grlib_apbuart_of_driver); + if (ret) { + printk(KERN_ERR + "%s: platform_driver_register failed (%i)\n", + __FILE__, ret); + uart_unregister_driver(&grlib_apbuart_driver); + return ret; + } + + return ret; +} + +static void __exit grlib_apbuart_exit(void) +{ + int i; + + for (i = 0; i < grlib_apbuart_port_nr; i++) + uart_remove_one_port(&grlib_apbuart_driver, + &grlib_apbuart_ports[i]); + + uart_unregister_driver(&grlib_apbuart_driver); + platform_driver_unregister(&grlib_apbuart_of_driver); +} + +module_init(grlib_apbuart_init); +module_exit(grlib_apbuart_exit); + +MODULE_AUTHOR("Aeroflex Gaisler AB"); +MODULE_DESCRIPTION("GRLIB APBUART serial driver"); +MODULE_VERSION("2.1"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/apbuart.h b/drivers/tty/serial/apbuart.h new file mode 100644 index 000000000..81baf0076 --- /dev/null +++ b/drivers/tty/serial/apbuart.h @@ -0,0 +1,65 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __GRLIB_APBUART_H__ +#define __GRLIB_APBUART_H__ + +#include + +#define UART_NR 8 +static int grlib_apbuart_port_nr; + +struct grlib_apbuart_regs_map { + u32 data; + u32 status; + u32 ctrl; + u32 scaler; +}; + +struct amba_prom_registers { + unsigned int phys_addr; + unsigned int reg_size; +}; + +/* + * The following defines the bits in the APBUART Status Registers. + */ +#define UART_STATUS_DR 0x00000001 /* Data Ready */ +#define UART_STATUS_TSE 0x00000002 /* TX Send Register Empty */ +#define UART_STATUS_THE 0x00000004 /* TX Hold Register Empty */ +#define UART_STATUS_BR 0x00000008 /* Break Error */ +#define UART_STATUS_OE 0x00000010 /* RX Overrun Error */ +#define UART_STATUS_PE 0x00000020 /* RX Parity Error */ +#define UART_STATUS_FE 0x00000040 /* RX Framing Error */ +#define UART_STATUS_ERR 0x00000078 /* Error Mask */ + +/* + * The following defines the bits in the APBUART Ctrl Registers. + */ +#define UART_CTRL_RE 0x00000001 /* Receiver enable */ +#define UART_CTRL_TE 0x00000002 /* Transmitter enable */ +#define UART_CTRL_RI 0x00000004 /* Receiver interrupt enable */ +#define UART_CTRL_TI 0x00000008 /* Transmitter irq */ +#define UART_CTRL_PS 0x00000010 /* Parity select */ +#define UART_CTRL_PE 0x00000020 /* Parity enable */ +#define UART_CTRL_FL 0x00000040 /* Flow control enable */ +#define UART_CTRL_LB 0x00000080 /* Loopback enable */ + +#define APBBASE(port) ((struct grlib_apbuart_regs_map *)((port)->membase)) + +#define APBBASE_DATA_P(port) (&(APBBASE(port)->data)) +#define APBBASE_STATUS_P(port) (&(APBBASE(port)->status)) +#define APBBASE_CTRL_P(port) (&(APBBASE(port)->ctrl)) +#define APBBASE_SCALAR_P(port) (&(APBBASE(port)->scaler)) + +#define UART_GET_CHAR(port) (__raw_readl(APBBASE_DATA_P(port))) +#define UART_PUT_CHAR(port, v) (__raw_writel(v, APBBASE_DATA_P(port))) +#define UART_GET_STATUS(port) (__raw_readl(APBBASE_STATUS_P(port))) +#define UART_PUT_STATUS(port, v)(__raw_writel(v, APBBASE_STATUS_P(port))) +#define UART_GET_CTRL(port) (__raw_readl(APBBASE_CTRL_P(port))) +#define UART_PUT_CTRL(port, v) (__raw_writel(v, APBBASE_CTRL_P(port))) +#define UART_GET_SCAL(port) (__raw_readl(APBBASE_SCALAR_P(port))) +#define UART_PUT_SCAL(port, v) (__raw_writel(v, APBBASE_SCALAR_P(port))) + +#define UART_RX_DATA(s) (((s) & UART_STATUS_DR) != 0) +#define UART_TX_READY(s) (((s) & UART_STATUS_THE) != 0) + +#endif /* __GRLIB_APBUART_H__ */ diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c new file mode 100644 index 000000000..fcbaff894 --- /dev/null +++ b/drivers/tty/serial/ar933x_uart.c @@ -0,0 +1,893 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Atheros AR933X SoC built-in UART driver + * + * Copyright (C) 2011 Gabor Juhos + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include + +#include "serial_mctrl_gpio.h" + +#define DRIVER_NAME "ar933x-uart" + +#define AR933X_UART_MAX_SCALE 0xff +#define AR933X_UART_MAX_STEP 0xffff + +#define AR933X_UART_MIN_BAUD 300 +#define AR933X_UART_MAX_BAUD 3000000 + +#define AR933X_DUMMY_STATUS_RD 0x01 + +static struct uart_driver ar933x_uart_driver; + +struct ar933x_uart_port { + struct uart_port port; + unsigned int ier; /* shadow Interrupt Enable Register */ + unsigned int min_baud; + unsigned int max_baud; + struct clk *clk; + struct mctrl_gpios *gpios; + struct gpio_desc *rts_gpiod; +}; + +static inline unsigned int ar933x_uart_read(struct ar933x_uart_port *up, + int offset) +{ + return readl(up->port.membase + offset); +} + +static inline void ar933x_uart_write(struct ar933x_uart_port *up, + int offset, unsigned int value) +{ + writel(value, up->port.membase + offset); +} + +static inline void ar933x_uart_rmw(struct ar933x_uart_port *up, + unsigned int offset, + unsigned int mask, + unsigned int val) +{ + unsigned int t; + + t = ar933x_uart_read(up, offset); + t &= ~mask; + t |= val; + ar933x_uart_write(up, offset, t); +} + +static inline void ar933x_uart_rmw_set(struct ar933x_uart_port *up, + unsigned int offset, + unsigned int val) +{ + ar933x_uart_rmw(up, offset, 0, val); +} + +static inline void ar933x_uart_rmw_clear(struct ar933x_uart_port *up, + unsigned int offset, + unsigned int val) +{ + ar933x_uart_rmw(up, offset, val, 0); +} + +static inline void ar933x_uart_start_tx_interrupt(struct ar933x_uart_port *up) +{ + up->ier |= AR933X_UART_INT_TX_EMPTY; + ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier); +} + +static inline void ar933x_uart_stop_tx_interrupt(struct ar933x_uart_port *up) +{ + up->ier &= ~AR933X_UART_INT_TX_EMPTY; + ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier); +} + +static inline void ar933x_uart_start_rx_interrupt(struct ar933x_uart_port *up) +{ + up->ier |= AR933X_UART_INT_RX_VALID; + ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier); +} + +static inline void ar933x_uart_stop_rx_interrupt(struct ar933x_uart_port *up) +{ + up->ier &= ~AR933X_UART_INT_RX_VALID; + ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier); +} + +static inline void ar933x_uart_putc(struct ar933x_uart_port *up, int ch) +{ + unsigned int rdata; + + rdata = ch & AR933X_UART_DATA_TX_RX_MASK; + rdata |= AR933X_UART_DATA_TX_CSR; + ar933x_uart_write(up, AR933X_UART_DATA_REG, rdata); +} + +static unsigned int ar933x_uart_tx_empty(struct uart_port *port) +{ + struct ar933x_uart_port *up = + container_of(port, struct ar933x_uart_port, port); + unsigned long flags; + unsigned int rdata; + + spin_lock_irqsave(&up->port.lock, flags); + rdata = ar933x_uart_read(up, AR933X_UART_DATA_REG); + spin_unlock_irqrestore(&up->port.lock, flags); + + return (rdata & AR933X_UART_DATA_TX_CSR) ? 0 : TIOCSER_TEMT; +} + +static unsigned int ar933x_uart_get_mctrl(struct uart_port *port) +{ + struct ar933x_uart_port *up = + container_of(port, struct ar933x_uart_port, port); + int ret = TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; + + mctrl_gpio_get(up->gpios, &ret); + + return ret; +} + +static void ar933x_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct ar933x_uart_port *up = + container_of(port, struct ar933x_uart_port, port); + + mctrl_gpio_set(up->gpios, mctrl); +} + +static void ar933x_uart_start_tx(struct uart_port *port) +{ + struct ar933x_uart_port *up = + container_of(port, struct ar933x_uart_port, port); + + ar933x_uart_start_tx_interrupt(up); +} + +static void ar933x_uart_wait_tx_complete(struct ar933x_uart_port *up) +{ + unsigned int status; + unsigned int timeout = 60000; + + /* Wait up to 60ms for the character(s) to be sent. */ + do { + status = ar933x_uart_read(up, AR933X_UART_CS_REG); + if (--timeout == 0) + break; + udelay(1); + } while (status & AR933X_UART_CS_TX_BUSY); + + if (timeout == 0) + dev_err(up->port.dev, "waiting for TX timed out\n"); +} + +static void ar933x_uart_rx_flush(struct ar933x_uart_port *up) +{ + unsigned int status; + + /* clear RX_VALID interrupt */ + ar933x_uart_write(up, AR933X_UART_INT_REG, AR933X_UART_INT_RX_VALID); + + /* remove characters from the RX FIFO */ + do { + ar933x_uart_write(up, AR933X_UART_DATA_REG, AR933X_UART_DATA_RX_CSR); + status = ar933x_uart_read(up, AR933X_UART_DATA_REG); + } while (status & AR933X_UART_DATA_RX_CSR); +} + +static void ar933x_uart_stop_tx(struct uart_port *port) +{ + struct ar933x_uart_port *up = + container_of(port, struct ar933x_uart_port, port); + + ar933x_uart_stop_tx_interrupt(up); +} + +static void ar933x_uart_stop_rx(struct uart_port *port) +{ + struct ar933x_uart_port *up = + container_of(port, struct ar933x_uart_port, port); + + ar933x_uart_stop_rx_interrupt(up); +} + +static void ar933x_uart_break_ctl(struct uart_port *port, int break_state) +{ + struct ar933x_uart_port *up = + container_of(port, struct ar933x_uart_port, port); + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + if (break_state == -1) + ar933x_uart_rmw_set(up, AR933X_UART_CS_REG, + AR933X_UART_CS_TX_BREAK); + else + ar933x_uart_rmw_clear(up, AR933X_UART_CS_REG, + AR933X_UART_CS_TX_BREAK); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +/* + * baudrate = (clk / (scale + 1)) * (step * (1 / 2^17)) + */ +static unsigned long ar933x_uart_get_baud(unsigned int clk, + unsigned int scale, + unsigned int step) +{ + u64 t; + u32 div; + + div = (2 << 16) * (scale + 1); + t = clk; + t *= step; + t += (div / 2); + do_div(t, div); + + return t; +} + +static void ar933x_uart_get_scale_step(unsigned int clk, + unsigned int baud, + unsigned int *scale, + unsigned int *step) +{ + unsigned int tscale; + long min_diff; + + *scale = 0; + *step = 0; + + min_diff = baud; + for (tscale = 0; tscale < AR933X_UART_MAX_SCALE; tscale++) { + u64 tstep; + int diff; + + tstep = baud * (tscale + 1); + tstep *= (2 << 16); + do_div(tstep, clk); + + if (tstep > AR933X_UART_MAX_STEP) + break; + + diff = abs(ar933x_uart_get_baud(clk, tscale, tstep) - baud); + if (diff < min_diff) { + min_diff = diff; + *scale = tscale; + *step = tstep; + } + } +} + +static void ar933x_uart_set_termios(struct uart_port *port, + struct ktermios *new, + struct ktermios *old) +{ + struct ar933x_uart_port *up = + container_of(port, struct ar933x_uart_port, port); + unsigned int cs; + unsigned long flags; + unsigned int baud, scale, step; + + /* Only CS8 is supported */ + new->c_cflag &= ~CSIZE; + new->c_cflag |= CS8; + + /* Only one stop bit is supported */ + new->c_cflag &= ~CSTOPB; + + cs = 0; + if (new->c_cflag & PARENB) { + if (!(new->c_cflag & PARODD)) + cs |= AR933X_UART_CS_PARITY_EVEN; + else + cs |= AR933X_UART_CS_PARITY_ODD; + } else { + cs |= AR933X_UART_CS_PARITY_NONE; + } + + /* Mark/space parity is not supported */ + new->c_cflag &= ~CMSPAR; + + baud = uart_get_baud_rate(port, new, old, up->min_baud, up->max_baud); + ar933x_uart_get_scale_step(port->uartclk, baud, &scale, &step); + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + spin_lock_irqsave(&up->port.lock, flags); + + /* disable the UART */ + ar933x_uart_rmw_clear(up, AR933X_UART_CS_REG, + AR933X_UART_CS_IF_MODE_M << AR933X_UART_CS_IF_MODE_S); + + /* Update the per-port timeout. */ + uart_update_timeout(port, new->c_cflag, baud); + + up->port.ignore_status_mask = 0; + + /* ignore all characters if CREAD is not set */ + if ((new->c_cflag & CREAD) == 0) + up->port.ignore_status_mask |= AR933X_DUMMY_STATUS_RD; + + ar933x_uart_write(up, AR933X_UART_CLOCK_REG, + scale << AR933X_UART_CLOCK_SCALE_S | step); + + /* setup configuration register */ + ar933x_uart_rmw(up, AR933X_UART_CS_REG, AR933X_UART_CS_PARITY_M, cs); + + /* enable host interrupt */ + ar933x_uart_rmw_set(up, AR933X_UART_CS_REG, + AR933X_UART_CS_HOST_INT_EN); + + /* enable RX and TX ready overide */ + ar933x_uart_rmw_set(up, AR933X_UART_CS_REG, + AR933X_UART_CS_TX_READY_ORIDE | AR933X_UART_CS_RX_READY_ORIDE); + + /* reenable the UART */ + ar933x_uart_rmw(up, AR933X_UART_CS_REG, + AR933X_UART_CS_IF_MODE_M << AR933X_UART_CS_IF_MODE_S, + AR933X_UART_CS_IF_MODE_DCE << AR933X_UART_CS_IF_MODE_S); + + spin_unlock_irqrestore(&up->port.lock, flags); + + if (tty_termios_baud_rate(new)) + tty_termios_encode_baud_rate(new, baud, baud); +} + +static void ar933x_uart_rx_chars(struct ar933x_uart_port *up) +{ + struct tty_port *port = &up->port.state->port; + int max_count = 256; + + do { + unsigned int rdata; + unsigned char ch; + + rdata = ar933x_uart_read(up, AR933X_UART_DATA_REG); + if ((rdata & AR933X_UART_DATA_RX_CSR) == 0) + break; + + /* remove the character from the FIFO */ + ar933x_uart_write(up, AR933X_UART_DATA_REG, + AR933X_UART_DATA_RX_CSR); + + up->port.icount.rx++; + ch = rdata & AR933X_UART_DATA_TX_RX_MASK; + + if (uart_handle_sysrq_char(&up->port, ch)) + continue; + + if ((up->port.ignore_status_mask & AR933X_DUMMY_STATUS_RD) == 0) + tty_insert_flip_char(port, ch, TTY_NORMAL); + } while (max_count-- > 0); + + spin_unlock(&up->port.lock); + tty_flip_buffer_push(port); + spin_lock(&up->port.lock); +} + +static void ar933x_uart_tx_chars(struct ar933x_uart_port *up) +{ + struct circ_buf *xmit = &up->port.state->xmit; + struct serial_rs485 *rs485conf = &up->port.rs485; + int count; + bool half_duplex_send = false; + + if (uart_tx_stopped(&up->port)) + return; + + if ((rs485conf->flags & SER_RS485_ENABLED) && + (up->port.x_char || !uart_circ_empty(xmit))) { + ar933x_uart_stop_rx_interrupt(up); + gpiod_set_value(up->rts_gpiod, !!(rs485conf->flags & SER_RS485_RTS_ON_SEND)); + half_duplex_send = true; + } + + count = up->port.fifosize; + do { + unsigned int rdata; + + rdata = ar933x_uart_read(up, AR933X_UART_DATA_REG); + if ((rdata & AR933X_UART_DATA_TX_CSR) == 0) + break; + + if (up->port.x_char) { + ar933x_uart_putc(up, up->port.x_char); + up->port.icount.tx++; + up->port.x_char = 0; + continue; + } + + if (uart_circ_empty(xmit)) + break; + + ar933x_uart_putc(up, xmit->buf[xmit->tail]); + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + if (!uart_circ_empty(xmit)) { + ar933x_uart_start_tx_interrupt(up); + } else if (half_duplex_send) { + ar933x_uart_wait_tx_complete(up); + ar933x_uart_rx_flush(up); + ar933x_uart_start_rx_interrupt(up); + gpiod_set_value(up->rts_gpiod, !!(rs485conf->flags & SER_RS485_RTS_AFTER_SEND)); + } +} + +static irqreturn_t ar933x_uart_interrupt(int irq, void *dev_id) +{ + struct ar933x_uart_port *up = dev_id; + unsigned int status; + + status = ar933x_uart_read(up, AR933X_UART_CS_REG); + if ((status & AR933X_UART_CS_HOST_INT) == 0) + return IRQ_NONE; + + spin_lock(&up->port.lock); + + status = ar933x_uart_read(up, AR933X_UART_INT_REG); + status &= ar933x_uart_read(up, AR933X_UART_INT_EN_REG); + + if (status & AR933X_UART_INT_RX_VALID) { + ar933x_uart_write(up, AR933X_UART_INT_REG, + AR933X_UART_INT_RX_VALID); + ar933x_uart_rx_chars(up); + } + + if (status & AR933X_UART_INT_TX_EMPTY) { + ar933x_uart_write(up, AR933X_UART_INT_REG, + AR933X_UART_INT_TX_EMPTY); + ar933x_uart_stop_tx_interrupt(up); + ar933x_uart_tx_chars(up); + } + + spin_unlock(&up->port.lock); + + return IRQ_HANDLED; +} + +static int ar933x_uart_startup(struct uart_port *port) +{ + struct ar933x_uart_port *up = + container_of(port, struct ar933x_uart_port, port); + unsigned long flags; + int ret; + + ret = request_irq(up->port.irq, ar933x_uart_interrupt, + up->port.irqflags, dev_name(up->port.dev), up); + if (ret) + return ret; + + spin_lock_irqsave(&up->port.lock, flags); + + /* Enable HOST interrupts */ + ar933x_uart_rmw_set(up, AR933X_UART_CS_REG, + AR933X_UART_CS_HOST_INT_EN); + + /* enable RX and TX ready overide */ + ar933x_uart_rmw_set(up, AR933X_UART_CS_REG, + AR933X_UART_CS_TX_READY_ORIDE | AR933X_UART_CS_RX_READY_ORIDE); + + /* Enable RX interrupts */ + ar933x_uart_start_rx_interrupt(up); + + spin_unlock_irqrestore(&up->port.lock, flags); + + return 0; +} + +static void ar933x_uart_shutdown(struct uart_port *port) +{ + struct ar933x_uart_port *up = + container_of(port, struct ar933x_uart_port, port); + + /* Disable all interrupts */ + up->ier = 0; + ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier); + + /* Disable break condition */ + ar933x_uart_rmw_clear(up, AR933X_UART_CS_REG, + AR933X_UART_CS_TX_BREAK); + + free_irq(up->port.irq, up); +} + +static const char *ar933x_uart_type(struct uart_port *port) +{ + return (port->type == PORT_AR933X) ? "AR933X UART" : NULL; +} + +static void ar933x_uart_release_port(struct uart_port *port) +{ + /* Nothing to release ... */ +} + +static int ar933x_uart_request_port(struct uart_port *port) +{ + /* UARTs always present */ + return 0; +} + +static void ar933x_uart_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) + port->type = PORT_AR933X; +} + +static int ar933x_uart_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + struct ar933x_uart_port *up = + container_of(port, struct ar933x_uart_port, port); + + if (ser->type != PORT_UNKNOWN && + ser->type != PORT_AR933X) + return -EINVAL; + + if (ser->irq < 0 || ser->irq >= NR_IRQS) + return -EINVAL; + + if (ser->baud_base < up->min_baud || + ser->baud_base > up->max_baud) + return -EINVAL; + + return 0; +} + +static const struct uart_ops ar933x_uart_ops = { + .tx_empty = ar933x_uart_tx_empty, + .set_mctrl = ar933x_uart_set_mctrl, + .get_mctrl = ar933x_uart_get_mctrl, + .stop_tx = ar933x_uart_stop_tx, + .start_tx = ar933x_uart_start_tx, + .stop_rx = ar933x_uart_stop_rx, + .break_ctl = ar933x_uart_break_ctl, + .startup = ar933x_uart_startup, + .shutdown = ar933x_uart_shutdown, + .set_termios = ar933x_uart_set_termios, + .type = ar933x_uart_type, + .release_port = ar933x_uart_release_port, + .request_port = ar933x_uart_request_port, + .config_port = ar933x_uart_config_port, + .verify_port = ar933x_uart_verify_port, +}; + +static int ar933x_config_rs485(struct uart_port *port, + struct serial_rs485 *rs485conf) +{ + struct ar933x_uart_port *up = + container_of(port, struct ar933x_uart_port, port); + + if ((rs485conf->flags & SER_RS485_ENABLED) && + !up->rts_gpiod) { + dev_err(port->dev, "RS485 needs rts-gpio\n"); + return 1; + } + + if (rs485conf->flags & SER_RS485_ENABLED) + gpiod_set_value(up->rts_gpiod, + !!(rs485conf->flags & SER_RS485_RTS_AFTER_SEND)); + + port->rs485 = *rs485conf; + return 0; +} + +#ifdef CONFIG_SERIAL_AR933X_CONSOLE +static struct ar933x_uart_port * +ar933x_console_ports[CONFIG_SERIAL_AR933X_NR_UARTS]; + +static void ar933x_uart_wait_xmitr(struct ar933x_uart_port *up) +{ + unsigned int status; + unsigned int timeout = 60000; + + /* Wait up to 60ms for the character(s) to be sent. */ + do { + status = ar933x_uart_read(up, AR933X_UART_DATA_REG); + if (--timeout == 0) + break; + udelay(1); + } while ((status & AR933X_UART_DATA_TX_CSR) == 0); +} + +static void ar933x_uart_console_putchar(struct uart_port *port, int ch) +{ + struct ar933x_uart_port *up = + container_of(port, struct ar933x_uart_port, port); + + ar933x_uart_wait_xmitr(up); + ar933x_uart_putc(up, ch); +} + +static void ar933x_uart_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct ar933x_uart_port *up = ar933x_console_ports[co->index]; + unsigned long flags; + unsigned int int_en; + int locked = 1; + + local_irq_save(flags); + + if (up->port.sysrq) + locked = 0; + else if (oops_in_progress) + locked = spin_trylock(&up->port.lock); + else + spin_lock(&up->port.lock); + + /* + * First save the IER then disable the interrupts + */ + int_en = ar933x_uart_read(up, AR933X_UART_INT_EN_REG); + ar933x_uart_write(up, AR933X_UART_INT_EN_REG, 0); + + uart_console_write(&up->port, s, count, ar933x_uart_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + ar933x_uart_wait_xmitr(up); + ar933x_uart_write(up, AR933X_UART_INT_EN_REG, int_en); + + ar933x_uart_write(up, AR933X_UART_INT_REG, AR933X_UART_INT_ALLINTS); + + if (locked) + spin_unlock(&up->port.lock); + + local_irq_restore(flags); +} + +static int ar933x_uart_console_setup(struct console *co, char *options) +{ + struct ar933x_uart_port *up; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index < 0 || co->index >= CONFIG_SERIAL_AR933X_NR_UARTS) + return -EINVAL; + + up = ar933x_console_ports[co->index]; + if (!up) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&up->port, co, baud, parity, bits, flow); +} + +static struct console ar933x_uart_console = { + .name = "ttyATH", + .write = ar933x_uart_console_write, + .device = uart_console_device, + .setup = ar933x_uart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &ar933x_uart_driver, +}; +#endif /* CONFIG_SERIAL_AR933X_CONSOLE */ + +static struct uart_driver ar933x_uart_driver = { + .owner = THIS_MODULE, + .driver_name = DRIVER_NAME, + .dev_name = "ttyATH", + .nr = CONFIG_SERIAL_AR933X_NR_UARTS, + .cons = NULL, /* filled in runtime */ +}; + +static int ar933x_uart_probe(struct platform_device *pdev) +{ + struct ar933x_uart_port *up; + struct uart_port *port; + struct resource *mem_res; + struct resource *irq_res; + struct device_node *np; + unsigned int baud; + int id; + int ret; + + np = pdev->dev.of_node; + if (IS_ENABLED(CONFIG_OF) && np) { + id = of_alias_get_id(np, "serial"); + if (id < 0) { + dev_err(&pdev->dev, "unable to get alias id, err=%d\n", + id); + return id; + } + } else { + id = pdev->id; + if (id == -1) + id = 0; + } + + if (id >= CONFIG_SERIAL_AR933X_NR_UARTS) + return -EINVAL; + + irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!irq_res) { + dev_err(&pdev->dev, "no IRQ resource\n"); + return -EINVAL; + } + + up = devm_kzalloc(&pdev->dev, sizeof(struct ar933x_uart_port), + GFP_KERNEL); + if (!up) + return -ENOMEM; + + up->clk = devm_clk_get(&pdev->dev, "uart"); + if (IS_ERR(up->clk)) { + dev_err(&pdev->dev, "unable to get UART clock\n"); + return PTR_ERR(up->clk); + } + + port = &up->port; + + mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + port->membase = devm_ioremap_resource(&pdev->dev, mem_res); + if (IS_ERR(port->membase)) + return PTR_ERR(port->membase); + + ret = clk_prepare_enable(up->clk); + if (ret) + return ret; + + port->uartclk = clk_get_rate(up->clk); + if (!port->uartclk) { + ret = -EINVAL; + goto err_disable_clk; + } + + port->mapbase = mem_res->start; + port->line = id; + port->irq = irq_res->start; + port->dev = &pdev->dev; + port->type = PORT_AR933X; + port->iotype = UPIO_MEM32; + + port->regshift = 2; + port->fifosize = AR933X_UART_FIFO_SIZE; + port->ops = &ar933x_uart_ops; + port->rs485_config = ar933x_config_rs485; + + baud = ar933x_uart_get_baud(port->uartclk, AR933X_UART_MAX_SCALE, 1); + up->min_baud = max_t(unsigned int, baud, AR933X_UART_MIN_BAUD); + + baud = ar933x_uart_get_baud(port->uartclk, 0, AR933X_UART_MAX_STEP); + up->max_baud = min_t(unsigned int, baud, AR933X_UART_MAX_BAUD); + + ret = uart_get_rs485_mode(port); + if (ret) + goto err_disable_clk; + + up->gpios = mctrl_gpio_init(port, 0); + if (IS_ERR(up->gpios) && PTR_ERR(up->gpios) != -ENOSYS) { + ret = PTR_ERR(up->gpios); + goto err_disable_clk; + } + + up->rts_gpiod = mctrl_gpio_to_gpiod(up->gpios, UART_GPIO_RTS); + + if ((port->rs485.flags & SER_RS485_ENABLED) && + !up->rts_gpiod) { + dev_err(&pdev->dev, "lacking rts-gpio, disabling RS485\n"); + port->rs485.flags &= ~SER_RS485_ENABLED; + } + +#ifdef CONFIG_SERIAL_AR933X_CONSOLE + ar933x_console_ports[up->port.line] = up; +#endif + + ret = uart_add_one_port(&ar933x_uart_driver, &up->port); + if (ret) + goto err_disable_clk; + + platform_set_drvdata(pdev, up); + return 0; + +err_disable_clk: + clk_disable_unprepare(up->clk); + return ret; +} + +static int ar933x_uart_remove(struct platform_device *pdev) +{ + struct ar933x_uart_port *up; + + up = platform_get_drvdata(pdev); + + if (up) { + uart_remove_one_port(&ar933x_uart_driver, &up->port); + clk_disable_unprepare(up->clk); + } + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id ar933x_uart_of_ids[] = { + { .compatible = "qca,ar9330-uart" }, + {}, +}; +MODULE_DEVICE_TABLE(of, ar933x_uart_of_ids); +#endif + +static struct platform_driver ar933x_uart_platform_driver = { + .probe = ar933x_uart_probe, + .remove = ar933x_uart_remove, + .driver = { + .name = DRIVER_NAME, + .of_match_table = of_match_ptr(ar933x_uart_of_ids), + }, +}; + +static int __init ar933x_uart_init(void) +{ + int ret; + +#ifdef CONFIG_SERIAL_AR933X_CONSOLE + ar933x_uart_driver.cons = &ar933x_uart_console; +#endif + + ret = uart_register_driver(&ar933x_uart_driver); + if (ret) + goto err_out; + + ret = platform_driver_register(&ar933x_uart_platform_driver); + if (ret) + goto err_unregister_uart_driver; + + return 0; + +err_unregister_uart_driver: + uart_unregister_driver(&ar933x_uart_driver); +err_out: + return ret; +} + +static void __exit ar933x_uart_exit(void) +{ + platform_driver_unregister(&ar933x_uart_platform_driver); + uart_unregister_driver(&ar933x_uart_driver); +} + +module_init(ar933x_uart_init); +module_exit(ar933x_uart_exit); + +MODULE_DESCRIPTION("Atheros AR933X UART driver"); +MODULE_AUTHOR("Gabor Juhos "); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c new file mode 100644 index 000000000..6f7a7d2dc --- /dev/null +++ b/drivers/tty/serial/arc_uart.c @@ -0,0 +1,686 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ARC On-Chip(fpga) UART Driver + * + * Copyright (C) 2010-2012 Synopsys, Inc. (www.synopsys.com) + * + * vineetg: July 10th 2012 + * -Decoupled the driver from arch/arc + * +Using platform_get_resource() for irq/membase (thx to bfin_uart.c) + * +Using early_platform_xxx() for early console (thx to mach-shmobile/xxx) + * + * Vineetg: Aug 21st 2010 + * -Is uart_tx_stopped() not done in tty write path as it has already been + * taken care of, in serial core + * + * Vineetg: Aug 18th 2010 + * -New Serial Core based ARC UART driver + * -Derived largely from blackfin driver albiet with some major tweaks + * + * TODO: + * -check if sysreq works + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/************************************* + * ARC UART Hardware Specs + ************************************/ +#define ARC_UART_TX_FIFO_SIZE 1 + +/* + * UART Register set (this is not a Standards Compliant IP) + * Also each reg is Word aligned, but only 8 bits wide + */ +#define R_ID0 0 +#define R_ID1 4 +#define R_ID2 8 +#define R_ID3 12 +#define R_DATA 16 +#define R_STS 20 +#define R_BAUDL 24 +#define R_BAUDH 28 + +/* Bits for UART Status Reg (R/W) */ +#define RXIENB 0x04 /* Receive Interrupt Enable */ +#define TXIENB 0x40 /* Transmit Interrupt Enable */ + +#define RXEMPTY 0x20 /* Receive FIFO Empty: No char receivede */ +#define TXEMPTY 0x80 /* Transmit FIFO Empty, thus char can be written into */ + +#define RXFULL 0x08 /* Receive FIFO full */ +#define RXFULL1 0x10 /* Receive FIFO has space for 1 char (tot space=4) */ + +#define RXFERR 0x01 /* Frame Error: Stop Bit not detected */ +#define RXOERR 0x02 /* OverFlow Err: Char recv but RXFULL still set */ + +/* Uart bit fiddling helpers: lowest level */ +#define RBASE(port, reg) (port->membase + reg) +#define UART_REG_SET(u, r, v) writeb((v), RBASE(u, r)) +#define UART_REG_GET(u, r) readb(RBASE(u, r)) + +#define UART_REG_OR(u, r, v) UART_REG_SET(u, r, UART_REG_GET(u, r) | (v)) +#define UART_REG_CLR(u, r, v) UART_REG_SET(u, r, UART_REG_GET(u, r) & ~(v)) + +/* Uart bit fiddling helpers: API level */ +#define UART_SET_DATA(uart, val) UART_REG_SET(uart, R_DATA, val) +#define UART_GET_DATA(uart) UART_REG_GET(uart, R_DATA) + +#define UART_SET_BAUDH(uart, val) UART_REG_SET(uart, R_BAUDH, val) +#define UART_SET_BAUDL(uart, val) UART_REG_SET(uart, R_BAUDL, val) + +#define UART_CLR_STATUS(uart, val) UART_REG_CLR(uart, R_STS, val) +#define UART_GET_STATUS(uart) UART_REG_GET(uart, R_STS) + +#define UART_ALL_IRQ_DISABLE(uart) UART_REG_CLR(uart, R_STS, RXIENB|TXIENB) +#define UART_RX_IRQ_DISABLE(uart) UART_REG_CLR(uart, R_STS, RXIENB) +#define UART_TX_IRQ_DISABLE(uart) UART_REG_CLR(uart, R_STS, TXIENB) + +#define UART_ALL_IRQ_ENABLE(uart) UART_REG_OR(uart, R_STS, RXIENB|TXIENB) +#define UART_RX_IRQ_ENABLE(uart) UART_REG_OR(uart, R_STS, RXIENB) +#define UART_TX_IRQ_ENABLE(uart) UART_REG_OR(uart, R_STS, TXIENB) + +#define ARC_SERIAL_DEV_NAME "ttyARC" + +struct arc_uart_port { + struct uart_port port; + unsigned long baud; +}; + +#define to_arc_port(uport) container_of(uport, struct arc_uart_port, port) + +static struct arc_uart_port arc_uart_ports[CONFIG_SERIAL_ARC_NR_PORTS]; + +#ifdef CONFIG_SERIAL_ARC_CONSOLE +static struct console arc_console; +#endif + +#define DRIVER_NAME "arc-uart" + +static struct uart_driver arc_uart_driver = { + .owner = THIS_MODULE, + .driver_name = DRIVER_NAME, + .dev_name = ARC_SERIAL_DEV_NAME, + .major = 0, + .minor = 0, + .nr = CONFIG_SERIAL_ARC_NR_PORTS, +#ifdef CONFIG_SERIAL_ARC_CONSOLE + .cons = &arc_console, +#endif +}; + +static void arc_serial_stop_rx(struct uart_port *port) +{ + UART_RX_IRQ_DISABLE(port); +} + +static void arc_serial_stop_tx(struct uart_port *port) +{ + while (!(UART_GET_STATUS(port) & TXEMPTY)) + cpu_relax(); + + UART_TX_IRQ_DISABLE(port); +} + +/* + * Return TIOCSER_TEMT when transmitter is not busy. + */ +static unsigned int arc_serial_tx_empty(struct uart_port *port) +{ + unsigned int stat; + + stat = UART_GET_STATUS(port); + if (stat & TXEMPTY) + return TIOCSER_TEMT; + + return 0; +} + +/* + * Driver internal routine, used by both tty(serial core) as well as tx-isr + * -Called under spinlock in either cases + * -also tty->stopped has already been checked + * = by uart_start( ) before calling us + * = tx_ist checks that too before calling + */ +static void arc_serial_tx_chars(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + int sent = 0; + unsigned char ch; + + if (unlikely(port->x_char)) { + UART_SET_DATA(port, port->x_char); + port->icount.tx++; + port->x_char = 0; + sent = 1; + } else if (!uart_circ_empty(xmit)) { + ch = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + while (!(UART_GET_STATUS(port) & TXEMPTY)) + cpu_relax(); + UART_SET_DATA(port, ch); + sent = 1; + } + + /* + * If num chars in xmit buffer are too few, ask tty layer for more. + * By Hard ISR to schedule processing in software interrupt part + */ + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (sent) + UART_TX_IRQ_ENABLE(port); +} + +/* + * port is locked and interrupts are disabled + * uart_start( ) calls us under the port spinlock irqsave + */ +static void arc_serial_start_tx(struct uart_port *port) +{ + arc_serial_tx_chars(port); +} + +static void arc_serial_rx_chars(struct uart_port *port, unsigned int status) +{ + unsigned int ch, flg = 0; + + /* + * UART has 4 deep RX-FIFO. Driver's recongnition of this fact + * is very subtle. Here's how ... + * Upon getting a RX-Intr, such that RX-EMPTY=0, meaning data available, + * driver reads the DATA Reg and keeps doing that in a loop, until + * RX-EMPTY=1. Multiple chars being avail, with a single Interrupt, + * before RX-EMPTY=0, implies some sort of buffering going on in the + * controller, which is indeed the Rx-FIFO. + */ + do { + /* + * This could be an Rx Intr for err (no data), + * so check err and clear that Intr first + */ + if (unlikely(status & (RXOERR | RXFERR))) { + if (status & RXOERR) { + port->icount.overrun++; + flg = TTY_OVERRUN; + UART_CLR_STATUS(port, RXOERR); + } + + if (status & RXFERR) { + port->icount.frame++; + flg = TTY_FRAME; + UART_CLR_STATUS(port, RXFERR); + } + } else + flg = TTY_NORMAL; + + if (status & RXEMPTY) + continue; + + ch = UART_GET_DATA(port); + port->icount.rx++; + + if (!(uart_handle_sysrq_char(port, ch))) + uart_insert_char(port, status, RXOERR, ch, flg); + + spin_unlock(&port->lock); + tty_flip_buffer_push(&port->state->port); + spin_lock(&port->lock); + } while (!((status = UART_GET_STATUS(port)) & RXEMPTY)); +} + +/* + * A note on the Interrupt handling state machine of this driver + * + * kernel printk writes funnel thru the console driver framework and in order + * to keep things simple as well as efficient, it writes to UART in polled + * mode, in one shot, and exits. + * + * OTOH, Userland output (via tty layer), uses interrupt based writes as there + * can be undeterministic delay between char writes. + * + * Thus Rx-interrupts are always enabled, while tx-interrupts are by default + * disabled. + * + * When tty has some data to send out, serial core calls driver's start_tx + * which + * -checks-if-tty-buffer-has-char-to-send + * -writes-data-to-uart + * -enable-tx-intr + * + * Once data bits are pushed out, controller raises the Tx-room-avail-Interrupt. + * The first thing Tx ISR does is disable further Tx interrupts (as this could + * be the last char to send, before settling down into the quiet polled mode). + * It then calls the exact routine used by tty layer write to send out any + * more char in tty buffer. In case of sending, it re-enables Tx-intr. In case + * of no data, it remains disabled. + * This is how the transmit state machine is dynamically switched on/off + */ + +static irqreturn_t arc_serial_isr(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + unsigned int status; + + status = UART_GET_STATUS(port); + + /* + * Single IRQ for both Rx (data available) Tx (room available) Interrupt + * notifications from the UART Controller. + * To demultiplex between the two, we check the relevant bits + */ + if (status & RXIENB) { + + /* already in ISR, no need of xx_irqsave */ + spin_lock(&port->lock); + arc_serial_rx_chars(port, status); + spin_unlock(&port->lock); + } + + if ((status & TXIENB) && (status & TXEMPTY)) { + + /* Unconditionally disable further Tx-Interrupts. + * will be enabled by tx_chars() if needed. + */ + UART_TX_IRQ_DISABLE(port); + + spin_lock(&port->lock); + + if (!uart_tx_stopped(port)) + arc_serial_tx_chars(port); + + spin_unlock(&port->lock); + } + + return IRQ_HANDLED; +} + +static unsigned int arc_serial_get_mctrl(struct uart_port *port) +{ + /* + * Pretend we have a Modem status reg and following bits are + * always set, to satify the serial core state machine + * (DSR) Data Set Ready + * (CTS) Clear To Send + * (CAR) Carrier Detect + */ + return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; +} + +static void arc_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + /* MCR not present */ +} + +static void arc_serial_break_ctl(struct uart_port *port, int break_state) +{ + /* ARC UART doesn't support sending Break signal */ +} + +static int arc_serial_startup(struct uart_port *port) +{ + /* Before we hook up the ISR, Disable all UART Interrupts */ + UART_ALL_IRQ_DISABLE(port); + + if (request_irq(port->irq, arc_serial_isr, 0, "arc uart rx-tx", port)) { + dev_warn(port->dev, "Unable to attach ARC UART intr\n"); + return -EBUSY; + } + + UART_RX_IRQ_ENABLE(port); /* Only Rx IRQ enabled to begin with */ + + return 0; +} + +/* This is not really needed */ +static void arc_serial_shutdown(struct uart_port *port) +{ + free_irq(port->irq, port); +} + +static void +arc_serial_set_termios(struct uart_port *port, struct ktermios *new, + struct ktermios *old) +{ + struct arc_uart_port *uart = to_arc_port(port); + unsigned int baud, uartl, uarth, hw_val; + unsigned long flags; + + /* + * Use the generic handler so that any specially encoded baud rates + * such as SPD_xx flags or "%B0" can be handled + * Max Baud I suppose will not be more than current 115K * 4 + * Formula for ARC UART is: hw-val = ((CLK/(BAUD*4)) -1) + * spread over two 8-bit registers + */ + baud = uart_get_baud_rate(port, new, old, 0, 460800); + + hw_val = port->uartclk / (uart->baud * 4) - 1; + uartl = hw_val & 0xFF; + uarth = (hw_val >> 8) & 0xFF; + + spin_lock_irqsave(&port->lock, flags); + + UART_ALL_IRQ_DISABLE(port); + + UART_SET_BAUDL(port, uartl); + UART_SET_BAUDH(port, uarth); + + UART_RX_IRQ_ENABLE(port); + + /* + * UART doesn't support Parity/Hardware Flow Control; + * Only supports 8N1 character size + */ + new->c_cflag &= ~(CMSPAR|CRTSCTS|CSIZE); + new->c_cflag |= CS8; + + if (old) + tty_termios_copy_hw(new, old); + + /* Don't rewrite B0 */ + if (tty_termios_baud_rate(new)) + tty_termios_encode_baud_rate(new, baud, baud); + + uart_update_timeout(port, new->c_cflag, baud); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *arc_serial_type(struct uart_port *port) +{ + return port->type == PORT_ARC ? DRIVER_NAME : NULL; +} + +static void arc_serial_release_port(struct uart_port *port) +{ +} + +static int arc_serial_request_port(struct uart_port *port) +{ + return 0; +} + +/* + * Verify the new serial_struct (for TIOCSSERIAL). + */ +static int +arc_serial_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + if (port->type != PORT_UNKNOWN && ser->type != PORT_ARC) + return -EINVAL; + + return 0; +} + +/* + * Configure/autoconfigure the port. + */ +static void arc_serial_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) + port->type = PORT_ARC; +} + +#ifdef CONFIG_CONSOLE_POLL + +static void arc_serial_poll_putchar(struct uart_port *port, unsigned char chr) +{ + while (!(UART_GET_STATUS(port) & TXEMPTY)) + cpu_relax(); + + UART_SET_DATA(port, chr); +} + +static int arc_serial_poll_getchar(struct uart_port *port) +{ + unsigned char chr; + + while (!(UART_GET_STATUS(port) & RXEMPTY)) + cpu_relax(); + + chr = UART_GET_DATA(port); + return chr; +} +#endif + +static const struct uart_ops arc_serial_pops = { + .tx_empty = arc_serial_tx_empty, + .set_mctrl = arc_serial_set_mctrl, + .get_mctrl = arc_serial_get_mctrl, + .stop_tx = arc_serial_stop_tx, + .start_tx = arc_serial_start_tx, + .stop_rx = arc_serial_stop_rx, + .break_ctl = arc_serial_break_ctl, + .startup = arc_serial_startup, + .shutdown = arc_serial_shutdown, + .set_termios = arc_serial_set_termios, + .type = arc_serial_type, + .release_port = arc_serial_release_port, + .request_port = arc_serial_request_port, + .config_port = arc_serial_config_port, + .verify_port = arc_serial_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_put_char = arc_serial_poll_putchar, + .poll_get_char = arc_serial_poll_getchar, +#endif +}; + +#ifdef CONFIG_SERIAL_ARC_CONSOLE + +static int arc_serial_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index < 0 || co->index >= CONFIG_SERIAL_ARC_NR_PORTS) + return -ENODEV; + + /* + * The uart port backing the console (e.g. ttyARC1) might not have been + * init yet. If so, defer the console setup to after the port. + */ + port = &arc_uart_ports[co->index].port; + if (!port->membase) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + /* + * Serial core will call port->ops->set_termios( ) + * which will set the baud reg + */ + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static void arc_serial_console_putchar(struct uart_port *port, int ch) +{ + while (!(UART_GET_STATUS(port) & TXEMPTY)) + cpu_relax(); + + UART_SET_DATA(port, (unsigned char)ch); +} + +/* + * Interrupts are disabled on entering + */ +static void arc_serial_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_port *port = &arc_uart_ports[co->index].port; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + uart_console_write(port, s, count, arc_serial_console_putchar); + spin_unlock_irqrestore(&port->lock, flags); +} + +static struct console arc_console = { + .name = ARC_SERIAL_DEV_NAME, + .write = arc_serial_console_write, + .device = uart_console_device, + .setup = arc_serial_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &arc_uart_driver +}; + +static void arc_early_serial_write(struct console *con, const char *s, + unsigned int n) +{ + struct earlycon_device *dev = con->data; + + uart_console_write(&dev->port, s, n, arc_serial_console_putchar); +} + +static int __init arc_early_console_setup(struct earlycon_device *dev, + const char *opt) +{ + struct uart_port *port = &dev->port; + unsigned int l, h, hw_val; + + if (!dev->port.membase) + return -ENODEV; + + hw_val = port->uartclk / (dev->baud * 4) - 1; + l = hw_val & 0xFF; + h = (hw_val >> 8) & 0xFF; + + UART_SET_BAUDL(port, l); + UART_SET_BAUDH(port, h); + + dev->con->write = arc_early_serial_write; + return 0; +} +OF_EARLYCON_DECLARE(arc_uart, "snps,arc-uart", arc_early_console_setup); + +#endif /* CONFIG_SERIAL_ARC_CONSOLE */ + +static int arc_serial_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct arc_uart_port *uart; + struct uart_port *port; + int dev_id; + u32 val; + + /* no device tree device */ + if (!np) + return -ENODEV; + + dev_id = of_alias_get_id(np, "serial"); + if (dev_id < 0) + dev_id = 0; + + if (dev_id >= ARRAY_SIZE(arc_uart_ports)) { + dev_err(&pdev->dev, "serial%d out of range\n", dev_id); + return -EINVAL; + } + + uart = &arc_uart_ports[dev_id]; + port = &uart->port; + + if (of_property_read_u32(np, "clock-frequency", &val)) { + dev_err(&pdev->dev, "clock-frequency property NOTset\n"); + return -EINVAL; + } + port->uartclk = val; + + if (of_property_read_u32(np, "current-speed", &val)) { + dev_err(&pdev->dev, "current-speed property NOT set\n"); + return -EINVAL; + } + uart->baud = val; + + port->membase = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(port->membase)) { + /* No point of dev_err since UART itself is hosed here */ + return PTR_ERR(port->membase); + } + + port->irq = irq_of_parse_and_map(np, 0); + + port->dev = &pdev->dev; + port->iotype = UPIO_MEM; + port->flags = UPF_BOOT_AUTOCONF; + port->line = dev_id; + port->ops = &arc_serial_pops; + port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_ARC_CONSOLE); + + port->fifosize = ARC_UART_TX_FIFO_SIZE; + + /* + * uart_insert_char( ) uses it in decideding whether to ignore a + * char or not. Explicitly setting it here, removes the subtelty + */ + port->ignore_status_mask = 0; + + return uart_add_one_port(&arc_uart_driver, &arc_uart_ports[dev_id].port); +} + +static int arc_serial_remove(struct platform_device *pdev) +{ + /* This will never be called */ + return 0; +} + +static const struct of_device_id arc_uart_dt_ids[] = { + { .compatible = "snps,arc-uart" }, + { /* Sentinel */ } +}; +MODULE_DEVICE_TABLE(of, arc_uart_dt_ids); + +static struct platform_driver arc_platform_driver = { + .probe = arc_serial_probe, + .remove = arc_serial_remove, + .driver = { + .name = DRIVER_NAME, + .of_match_table = arc_uart_dt_ids, + }, +}; + +static int __init arc_serial_init(void) +{ + int ret; + + ret = uart_register_driver(&arc_uart_driver); + if (ret) + return ret; + + ret = platform_driver_register(&arc_platform_driver); + if (ret) + uart_unregister_driver(&arc_uart_driver); + + return ret; +} + +static void __exit arc_serial_exit(void) +{ + platform_driver_unregister(&arc_platform_driver); + uart_unregister_driver(&arc_uart_driver); +} + +module_init(arc_serial_init); +module_exit(arc_serial_exit); + +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRIVER_NAME); +MODULE_AUTHOR("Vineet Gupta"); +MODULE_DESCRIPTION("ARC(Synopsys) On-Chip(fpga) serial driver"); diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c new file mode 100644 index 000000000..a1249bed6 --- /dev/null +++ b/drivers/tty/serial/atmel_serial.c @@ -0,0 +1,3025 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver for Atmel AT91 Serial ports + * Copyright (C) 2003 Rick Bronson + * + * Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd. + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * DMA support added by Chip Coldwell. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define PDC_BUFFER_SIZE 512 +/* Revisit: We should calculate this based on the actual port settings */ +#define PDC_RX_TIMEOUT (3 * 10) /* 3 bytes */ + +/* The minium number of data FIFOs should be able to contain */ +#define ATMEL_MIN_FIFO_SIZE 8 +/* + * These two offsets are substracted from the RX FIFO size to define the RTS + * high and low thresholds + */ +#define ATMEL_RTS_HIGH_OFFSET 16 +#define ATMEL_RTS_LOW_OFFSET 20 + +#include + +#include "serial_mctrl_gpio.h" +#include "atmel_serial.h" + +static void atmel_start_rx(struct uart_port *port); +static void atmel_stop_rx(struct uart_port *port); + +#ifdef CONFIG_SERIAL_ATMEL_TTYAT + +/* Use device name ttyAT, major 204 and minor 154-169. This is necessary if we + * should coexist with the 8250 driver, such as if we have an external 16C550 + * UART. */ +#define SERIAL_ATMEL_MAJOR 204 +#define MINOR_START 154 +#define ATMEL_DEVICENAME "ttyAT" + +#else + +/* Use device name ttyS, major 4, minor 64-68. This is the usual serial port + * name, but it is legally reserved for the 8250 driver. */ +#define SERIAL_ATMEL_MAJOR TTY_MAJOR +#define MINOR_START 64 +#define ATMEL_DEVICENAME "ttyS" + +#endif + +#define ATMEL_ISR_PASS_LIMIT 256 + +struct atmel_dma_buffer { + unsigned char *buf; + dma_addr_t dma_addr; + unsigned int dma_size; + unsigned int ofs; +}; + +struct atmel_uart_char { + u16 status; + u16 ch; +}; + +/* + * Be careful, the real size of the ring buffer is + * sizeof(atmel_uart_char) * ATMEL_SERIAL_RINGSIZE. It means that ring buffer + * can contain up to 1024 characters in PIO mode and up to 4096 characters in + * DMA mode. + */ +#define ATMEL_SERIAL_RINGSIZE 1024 + +/* + * at91: 6 USARTs and one DBGU port (SAM9260) + * samx7: 3 USARTs and 5 UARTs + */ +#define ATMEL_MAX_UART 8 + +/* + * We wrap our port structure around the generic uart_port. + */ +struct atmel_uart_port { + struct uart_port uart; /* uart */ + struct clk *clk; /* uart clock */ + int may_wakeup; /* cached value of device_may_wakeup for times we need to disable it */ + u32 backup_imr; /* IMR saved during suspend */ + int break_active; /* break being received */ + + bool use_dma_rx; /* enable DMA receiver */ + bool use_pdc_rx; /* enable PDC receiver */ + short pdc_rx_idx; /* current PDC RX buffer */ + struct atmel_dma_buffer pdc_rx[2]; /* PDC receier */ + + bool use_dma_tx; /* enable DMA transmitter */ + bool use_pdc_tx; /* enable PDC transmitter */ + struct atmel_dma_buffer pdc_tx; /* PDC transmitter */ + + spinlock_t lock_tx; /* port lock */ + spinlock_t lock_rx; /* port lock */ + struct dma_chan *chan_tx; + struct dma_chan *chan_rx; + struct dma_async_tx_descriptor *desc_tx; + struct dma_async_tx_descriptor *desc_rx; + dma_cookie_t cookie_tx; + dma_cookie_t cookie_rx; + struct scatterlist sg_tx; + struct scatterlist sg_rx; + struct tasklet_struct tasklet_rx; + struct tasklet_struct tasklet_tx; + atomic_t tasklet_shutdown; + unsigned int irq_status_prev; + unsigned int tx_len; + + struct circ_buf rx_ring; + + struct mctrl_gpios *gpios; + u32 backup_mode; /* MR saved during iso7816 operations */ + u32 backup_brgr; /* BRGR saved during iso7816 operations */ + unsigned int tx_done_mask; + u32 fifo_size; + u32 rts_high; + u32 rts_low; + bool ms_irq_enabled; + u32 rtor; /* address of receiver timeout register if it exists */ + bool has_frac_baudrate; + bool has_hw_timer; + struct timer_list uart_timer; + + bool tx_stopped; + bool suspended; + unsigned int pending; + unsigned int pending_status; + spinlock_t lock_suspended; + + bool hd_start_rx; /* can start RX during half-duplex operation */ + + /* ISO7816 */ + unsigned int fidi_min; + unsigned int fidi_max; + +#ifdef CONFIG_PM + struct { + u32 cr; + u32 mr; + u32 imr; + u32 brgr; + u32 rtor; + u32 ttgr; + u32 fmr; + u32 fimr; + } cache; +#endif + + int (*prepare_rx)(struct uart_port *port); + int (*prepare_tx)(struct uart_port *port); + void (*schedule_rx)(struct uart_port *port); + void (*schedule_tx)(struct uart_port *port); + void (*release_rx)(struct uart_port *port); + void (*release_tx)(struct uart_port *port); +}; + +static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART]; +static DECLARE_BITMAP(atmel_ports_in_use, ATMEL_MAX_UART); + +#if defined(CONFIG_OF) +static const struct of_device_id atmel_serial_dt_ids[] = { + { .compatible = "atmel,at91rm9200-usart-serial" }, + { /* sentinel */ } +}; +#endif + +static inline struct atmel_uart_port * +to_atmel_uart_port(struct uart_port *uart) +{ + return container_of(uart, struct atmel_uart_port, uart); +} + +static inline u32 atmel_uart_readl(struct uart_port *port, u32 reg) +{ + return __raw_readl(port->membase + reg); +} + +static inline void atmel_uart_writel(struct uart_port *port, u32 reg, u32 value) +{ + __raw_writel(value, port->membase + reg); +} + +static inline u8 atmel_uart_read_char(struct uart_port *port) +{ + return __raw_readb(port->membase + ATMEL_US_RHR); +} + +static inline void atmel_uart_write_char(struct uart_port *port, u8 value) +{ + __raw_writeb(value, port->membase + ATMEL_US_THR); +} + +static inline int atmel_uart_is_half_duplex(struct uart_port *port) +{ + return ((port->rs485.flags & SER_RS485_ENABLED) && + !(port->rs485.flags & SER_RS485_RX_DURING_TX)) || + (port->iso7816.flags & SER_ISO7816_ENABLED); +} + +#ifdef CONFIG_SERIAL_ATMEL_PDC +static bool atmel_use_pdc_rx(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + return atmel_port->use_pdc_rx; +} + +static bool atmel_use_pdc_tx(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + return atmel_port->use_pdc_tx; +} +#else +static bool atmel_use_pdc_rx(struct uart_port *port) +{ + return false; +} + +static bool atmel_use_pdc_tx(struct uart_port *port) +{ + return false; +} +#endif + +static bool atmel_use_dma_tx(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + return atmel_port->use_dma_tx; +} + +static bool atmel_use_dma_rx(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + return atmel_port->use_dma_rx; +} + +static bool atmel_use_fifo(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + return atmel_port->fifo_size; +} + +static void atmel_tasklet_schedule(struct atmel_uart_port *atmel_port, + struct tasklet_struct *t) +{ + if (!atomic_read(&atmel_port->tasklet_shutdown)) + tasklet_schedule(t); +} + +/* Enable or disable the rs485 support */ +static int atmel_config_rs485(struct uart_port *port, + struct serial_rs485 *rs485conf) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + unsigned int mode; + + /* Disable interrupts */ + atmel_uart_writel(port, ATMEL_US_IDR, atmel_port->tx_done_mask); + + mode = atmel_uart_readl(port, ATMEL_US_MR); + + if (rs485conf->flags & SER_RS485_ENABLED) { + dev_dbg(port->dev, "Setting UART to RS485\n"); + if (rs485conf->flags & SER_RS485_RX_DURING_TX) + atmel_port->tx_done_mask = ATMEL_US_TXRDY; + else + atmel_port->tx_done_mask = ATMEL_US_TXEMPTY; + + atmel_uart_writel(port, ATMEL_US_TTGR, + rs485conf->delay_rts_after_send); + mode &= ~ATMEL_US_USMODE; + mode |= ATMEL_US_USMODE_RS485; + } else { + dev_dbg(port->dev, "Setting UART to RS232\n"); + if (atmel_use_pdc_tx(port)) + atmel_port->tx_done_mask = ATMEL_US_ENDTX | + ATMEL_US_TXBUFE; + else + atmel_port->tx_done_mask = ATMEL_US_TXRDY; + } + atmel_uart_writel(port, ATMEL_US_MR, mode); + + /* Enable interrupts */ + atmel_uart_writel(port, ATMEL_US_IER, atmel_port->tx_done_mask); + + return 0; +} + +static unsigned int atmel_calc_cd(struct uart_port *port, + struct serial_iso7816 *iso7816conf) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + unsigned int cd; + u64 mck_rate; + + mck_rate = (u64)clk_get_rate(atmel_port->clk); + do_div(mck_rate, iso7816conf->clk); + cd = mck_rate; + return cd; +} + +static unsigned int atmel_calc_fidi(struct uart_port *port, + struct serial_iso7816 *iso7816conf) +{ + u64 fidi = 0; + + if (iso7816conf->sc_fi && iso7816conf->sc_di) { + fidi = (u64)iso7816conf->sc_fi; + do_div(fidi, iso7816conf->sc_di); + } + return (u32)fidi; +} + +/* Enable or disable the iso7816 support */ +/* Called with interrupts disabled */ +static int atmel_config_iso7816(struct uart_port *port, + struct serial_iso7816 *iso7816conf) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + unsigned int mode; + unsigned int cd, fidi; + int ret = 0; + + /* Disable interrupts */ + atmel_uart_writel(port, ATMEL_US_IDR, atmel_port->tx_done_mask); + + mode = atmel_uart_readl(port, ATMEL_US_MR); + + if (iso7816conf->flags & SER_ISO7816_ENABLED) { + mode &= ~ATMEL_US_USMODE; + + if (iso7816conf->tg > 255) { + dev_err(port->dev, "ISO7816: Timeguard exceeding 255\n"); + memset(iso7816conf, 0, sizeof(struct serial_iso7816)); + ret = -EINVAL; + goto err_out; + } + + if ((iso7816conf->flags & SER_ISO7816_T_PARAM) + == SER_ISO7816_T(0)) { + mode |= ATMEL_US_USMODE_ISO7816_T0 | ATMEL_US_DSNACK; + } else if ((iso7816conf->flags & SER_ISO7816_T_PARAM) + == SER_ISO7816_T(1)) { + mode |= ATMEL_US_USMODE_ISO7816_T1 | ATMEL_US_INACK; + } else { + dev_err(port->dev, "ISO7816: Type not supported\n"); + memset(iso7816conf, 0, sizeof(struct serial_iso7816)); + ret = -EINVAL; + goto err_out; + } + + mode &= ~(ATMEL_US_USCLKS | ATMEL_US_NBSTOP | ATMEL_US_PAR); + + /* select mck clock, and output */ + mode |= ATMEL_US_USCLKS_MCK | ATMEL_US_CLKO; + /* set parity for normal/inverse mode + max iterations */ + mode |= ATMEL_US_PAR_EVEN | ATMEL_US_NBSTOP_1 | ATMEL_US_MAX_ITER(3); + + cd = atmel_calc_cd(port, iso7816conf); + fidi = atmel_calc_fidi(port, iso7816conf); + if (fidi == 0) { + dev_warn(port->dev, "ISO7816 fidi = 0, Generator generates no signal\n"); + } else if (fidi < atmel_port->fidi_min + || fidi > atmel_port->fidi_max) { + dev_err(port->dev, "ISO7816 fidi = %u, value not supported\n", fidi); + memset(iso7816conf, 0, sizeof(struct serial_iso7816)); + ret = -EINVAL; + goto err_out; + } + + if (!(port->iso7816.flags & SER_ISO7816_ENABLED)) { + /* port not yet in iso7816 mode: store configuration */ + atmel_port->backup_mode = atmel_uart_readl(port, ATMEL_US_MR); + atmel_port->backup_brgr = atmel_uart_readl(port, ATMEL_US_BRGR); + } + + atmel_uart_writel(port, ATMEL_US_TTGR, iso7816conf->tg); + atmel_uart_writel(port, ATMEL_US_BRGR, cd); + atmel_uart_writel(port, ATMEL_US_FIDI, fidi); + + atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXDIS | ATMEL_US_RXEN); + atmel_port->tx_done_mask = ATMEL_US_TXEMPTY | ATMEL_US_NACK | ATMEL_US_ITERATION; + } else { + dev_dbg(port->dev, "Setting UART back to RS232\n"); + /* back to last RS232 settings */ + mode = atmel_port->backup_mode; + memset(iso7816conf, 0, sizeof(struct serial_iso7816)); + atmel_uart_writel(port, ATMEL_US_TTGR, 0); + atmel_uart_writel(port, ATMEL_US_BRGR, atmel_port->backup_brgr); + atmel_uart_writel(port, ATMEL_US_FIDI, 0x174); + + if (atmel_use_pdc_tx(port)) + atmel_port->tx_done_mask = ATMEL_US_ENDTX | + ATMEL_US_TXBUFE; + else + atmel_port->tx_done_mask = ATMEL_US_TXRDY; + } + + port->iso7816 = *iso7816conf; + + atmel_uart_writel(port, ATMEL_US_MR, mode); + +err_out: + /* Enable interrupts */ + atmel_uart_writel(port, ATMEL_US_IER, atmel_port->tx_done_mask); + + return ret; +} + +/* + * Return TIOCSER_TEMT when transmitter FIFO and Shift register is empty. + */ +static u_int atmel_tx_empty(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + if (atmel_port->tx_stopped) + return TIOCSER_TEMT; + return (atmel_uart_readl(port, ATMEL_US_CSR) & ATMEL_US_TXEMPTY) ? + TIOCSER_TEMT : + 0; +} + +/* + * Set state of the modem control output lines + */ +static void atmel_set_mctrl(struct uart_port *port, u_int mctrl) +{ + unsigned int control = 0; + unsigned int mode = atmel_uart_readl(port, ATMEL_US_MR); + unsigned int rts_paused, rts_ready; + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + /* override mode to RS485 if needed, otherwise keep the current mode */ + if (port->rs485.flags & SER_RS485_ENABLED) { + atmel_uart_writel(port, ATMEL_US_TTGR, + port->rs485.delay_rts_after_send); + mode &= ~ATMEL_US_USMODE; + mode |= ATMEL_US_USMODE_RS485; + } + + /* set the RTS line state according to the mode */ + if ((mode & ATMEL_US_USMODE) == ATMEL_US_USMODE_HWHS) { + /* force RTS line to high level */ + rts_paused = ATMEL_US_RTSEN; + + /* give the control of the RTS line back to the hardware */ + rts_ready = ATMEL_US_RTSDIS; + } else { + /* force RTS line to high level */ + rts_paused = ATMEL_US_RTSDIS; + + /* force RTS line to low level */ + rts_ready = ATMEL_US_RTSEN; + } + + if (mctrl & TIOCM_RTS) + control |= rts_ready; + else + control |= rts_paused; + + if (mctrl & TIOCM_DTR) + control |= ATMEL_US_DTREN; + else + control |= ATMEL_US_DTRDIS; + + atmel_uart_writel(port, ATMEL_US_CR, control); + + mctrl_gpio_set(atmel_port->gpios, mctrl); + + /* Local loopback mode? */ + mode &= ~ATMEL_US_CHMODE; + if (mctrl & TIOCM_LOOP) + mode |= ATMEL_US_CHMODE_LOC_LOOP; + else + mode |= ATMEL_US_CHMODE_NORMAL; + + atmel_uart_writel(port, ATMEL_US_MR, mode); +} + +/* + * Get state of the modem control input lines + */ +static u_int atmel_get_mctrl(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + unsigned int ret = 0, status; + + status = atmel_uart_readl(port, ATMEL_US_CSR); + + /* + * The control signals are active low. + */ + if (!(status & ATMEL_US_DCD)) + ret |= TIOCM_CD; + if (!(status & ATMEL_US_CTS)) + ret |= TIOCM_CTS; + if (!(status & ATMEL_US_DSR)) + ret |= TIOCM_DSR; + if (!(status & ATMEL_US_RI)) + ret |= TIOCM_RI; + + return mctrl_gpio_get(atmel_port->gpios, &ret); +} + +/* + * Stop transmitting. + */ +static void atmel_stop_tx(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + if (atmel_use_pdc_tx(port)) { + /* disable PDC transmit */ + atmel_uart_writel(port, ATMEL_PDC_PTCR, ATMEL_PDC_TXTDIS); + } + + /* + * Disable the transmitter. + * This is mandatory when DMA is used, otherwise the DMA buffer + * is fully transmitted. + */ + atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXDIS); + atmel_port->tx_stopped = true; + + /* Disable interrupts */ + atmel_uart_writel(port, ATMEL_US_IDR, atmel_port->tx_done_mask); + + if (atmel_uart_is_half_duplex(port)) + if (!atomic_read(&atmel_port->tasklet_shutdown)) + atmel_start_rx(port); + +} + +/* + * Start transmitting. + */ +static void atmel_start_tx(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + if (atmel_use_pdc_tx(port) && (atmel_uart_readl(port, ATMEL_PDC_PTSR) + & ATMEL_PDC_TXTEN)) + /* The transmitter is already running. Yes, we + really need this.*/ + return; + + if (atmel_use_pdc_tx(port) || atmel_use_dma_tx(port)) + if (atmel_uart_is_half_duplex(port)) + atmel_stop_rx(port); + + if (atmel_use_pdc_tx(port)) + /* re-enable PDC transmit */ + atmel_uart_writel(port, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN); + + /* Enable interrupts */ + atmel_uart_writel(port, ATMEL_US_IER, atmel_port->tx_done_mask); + + /* re-enable the transmitter */ + atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXEN); + atmel_port->tx_stopped = false; +} + +/* + * start receiving - port is in process of being opened. + */ +static void atmel_start_rx(struct uart_port *port) +{ + /* reset status and receiver */ + atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_RSTSTA); + + atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_RXEN); + + if (atmel_use_pdc_rx(port)) { + /* enable PDC controller */ + atmel_uart_writel(port, ATMEL_US_IER, + ATMEL_US_ENDRX | ATMEL_US_TIMEOUT | + port->read_status_mask); + atmel_uart_writel(port, ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN); + } else { + atmel_uart_writel(port, ATMEL_US_IER, ATMEL_US_RXRDY); + } +} + +/* + * Stop receiving - port is in process of being closed. + */ +static void atmel_stop_rx(struct uart_port *port) +{ + atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_RXDIS); + + if (atmel_use_pdc_rx(port)) { + /* disable PDC receive */ + atmel_uart_writel(port, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS); + atmel_uart_writel(port, ATMEL_US_IDR, + ATMEL_US_ENDRX | ATMEL_US_TIMEOUT | + port->read_status_mask); + } else { + atmel_uart_writel(port, ATMEL_US_IDR, ATMEL_US_RXRDY); + } +} + +/* + * Enable modem status interrupts + */ +static void atmel_enable_ms(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + uint32_t ier = 0; + + /* + * Interrupt should not be enabled twice + */ + if (atmel_port->ms_irq_enabled) + return; + + atmel_port->ms_irq_enabled = true; + + if (!mctrl_gpio_to_gpiod(atmel_port->gpios, UART_GPIO_CTS)) + ier |= ATMEL_US_CTSIC; + + if (!mctrl_gpio_to_gpiod(atmel_port->gpios, UART_GPIO_DSR)) + ier |= ATMEL_US_DSRIC; + + if (!mctrl_gpio_to_gpiod(atmel_port->gpios, UART_GPIO_RI)) + ier |= ATMEL_US_RIIC; + + if (!mctrl_gpio_to_gpiod(atmel_port->gpios, UART_GPIO_DCD)) + ier |= ATMEL_US_DCDIC; + + atmel_uart_writel(port, ATMEL_US_IER, ier); + + mctrl_gpio_enable_ms(atmel_port->gpios); +} + +/* + * Disable modem status interrupts + */ +static void atmel_disable_ms(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + uint32_t idr = 0; + + /* + * Interrupt should not be disabled twice + */ + if (!atmel_port->ms_irq_enabled) + return; + + atmel_port->ms_irq_enabled = false; + + mctrl_gpio_disable_ms(atmel_port->gpios); + + if (!mctrl_gpio_to_gpiod(atmel_port->gpios, UART_GPIO_CTS)) + idr |= ATMEL_US_CTSIC; + + if (!mctrl_gpio_to_gpiod(atmel_port->gpios, UART_GPIO_DSR)) + idr |= ATMEL_US_DSRIC; + + if (!mctrl_gpio_to_gpiod(atmel_port->gpios, UART_GPIO_RI)) + idr |= ATMEL_US_RIIC; + + if (!mctrl_gpio_to_gpiod(atmel_port->gpios, UART_GPIO_DCD)) + idr |= ATMEL_US_DCDIC; + + atmel_uart_writel(port, ATMEL_US_IDR, idr); +} + +/* + * Control the transmission of a break signal + */ +static void atmel_break_ctl(struct uart_port *port, int break_state) +{ + if (break_state != 0) + /* start break */ + atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_STTBRK); + else + /* stop break */ + atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_STPBRK); +} + +/* + * Stores the incoming character in the ring buffer + */ +static void +atmel_buffer_rx_char(struct uart_port *port, unsigned int status, + unsigned int ch) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + struct circ_buf *ring = &atmel_port->rx_ring; + struct atmel_uart_char *c; + + if (!CIRC_SPACE(ring->head, ring->tail, ATMEL_SERIAL_RINGSIZE)) + /* Buffer overflow, ignore char */ + return; + + c = &((struct atmel_uart_char *)ring->buf)[ring->head]; + c->status = status; + c->ch = ch; + + /* Make sure the character is stored before we update head. */ + smp_wmb(); + + ring->head = (ring->head + 1) & (ATMEL_SERIAL_RINGSIZE - 1); +} + +/* + * Deal with parity, framing and overrun errors. + */ +static void atmel_pdc_rxerr(struct uart_port *port, unsigned int status) +{ + /* clear error */ + atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_RSTSTA); + + if (status & ATMEL_US_RXBRK) { + /* ignore side-effect */ + status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME); + port->icount.brk++; + } + if (status & ATMEL_US_PARE) + port->icount.parity++; + if (status & ATMEL_US_FRAME) + port->icount.frame++; + if (status & ATMEL_US_OVRE) + port->icount.overrun++; +} + +/* + * Characters received (called from interrupt handler) + */ +static void atmel_rx_chars(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + unsigned int status, ch; + + status = atmel_uart_readl(port, ATMEL_US_CSR); + while (status & ATMEL_US_RXRDY) { + ch = atmel_uart_read_char(port); + + /* + * note that the error handling code is + * out of the main execution path + */ + if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME + | ATMEL_US_OVRE | ATMEL_US_RXBRK) + || atmel_port->break_active)) { + + /* clear error */ + atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_RSTSTA); + + if (status & ATMEL_US_RXBRK + && !atmel_port->break_active) { + atmel_port->break_active = 1; + atmel_uart_writel(port, ATMEL_US_IER, + ATMEL_US_RXBRK); + } else { + /* + * This is either the end-of-break + * condition or we've received at + * least one character without RXBRK + * being set. In both cases, the next + * RXBRK will indicate start-of-break. + */ + atmel_uart_writel(port, ATMEL_US_IDR, + ATMEL_US_RXBRK); + status &= ~ATMEL_US_RXBRK; + atmel_port->break_active = 0; + } + } + + atmel_buffer_rx_char(port, status, ch); + status = atmel_uart_readl(port, ATMEL_US_CSR); + } + + atmel_tasklet_schedule(atmel_port, &atmel_port->tasklet_rx); +} + +/* + * Transmit characters (called from tasklet with TXRDY interrupt + * disabled) + */ +static void atmel_tx_chars(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + if (port->x_char && + (atmel_uart_readl(port, ATMEL_US_CSR) & ATMEL_US_TXRDY)) { + atmel_uart_write_char(port, port->x_char); + port->icount.tx++; + port->x_char = 0; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) + return; + + while (atmel_uart_readl(port, ATMEL_US_CSR) & ATMEL_US_TXRDY) { + atmel_uart_write_char(port, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (!uart_circ_empty(xmit)) { + /* we still have characters to transmit, so we should continue + * transmitting them when TX is ready, regardless of + * mode or duplexity + */ + atmel_port->tx_done_mask |= ATMEL_US_TXRDY; + + /* Enable interrupts */ + atmel_uart_writel(port, ATMEL_US_IER, + atmel_port->tx_done_mask); + } else { + if (atmel_uart_is_half_duplex(port)) + atmel_port->tx_done_mask &= ~ATMEL_US_TXRDY; + } +} + +static void atmel_complete_tx_dma(void *arg) +{ + struct atmel_uart_port *atmel_port = arg; + struct uart_port *port = &atmel_port->uart; + struct circ_buf *xmit = &port->state->xmit; + struct dma_chan *chan = atmel_port->chan_tx; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + if (chan) + dmaengine_terminate_all(chan); + xmit->tail += atmel_port->tx_len; + xmit->tail &= UART_XMIT_SIZE - 1; + + port->icount.tx += atmel_port->tx_len; + + spin_lock(&atmel_port->lock_tx); + async_tx_ack(atmel_port->desc_tx); + atmel_port->cookie_tx = -EINVAL; + atmel_port->desc_tx = NULL; + spin_unlock(&atmel_port->lock_tx); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + /* + * xmit is a circular buffer so, if we have just send data from + * xmit->tail to the end of xmit->buf, now we have to transmit the + * remaining data from the beginning of xmit->buf to xmit->head. + */ + if (!uart_circ_empty(xmit)) + atmel_tasklet_schedule(atmel_port, &atmel_port->tasklet_tx); + else if (atmel_uart_is_half_duplex(port)) { + /* + * DMA done, re-enable TXEMPTY and signal that we can stop + * TX and start RX for RS485 + */ + atmel_port->hd_start_rx = true; + atmel_uart_writel(port, ATMEL_US_IER, + atmel_port->tx_done_mask); + } + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void atmel_release_tx_dma(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + struct dma_chan *chan = atmel_port->chan_tx; + + if (chan) { + dmaengine_terminate_all(chan); + dma_release_channel(chan); + dma_unmap_sg(port->dev, &atmel_port->sg_tx, 1, + DMA_TO_DEVICE); + } + + atmel_port->desc_tx = NULL; + atmel_port->chan_tx = NULL; + atmel_port->cookie_tx = -EINVAL; +} + +/* + * Called from tasklet with TXRDY interrupt is disabled. + */ +static void atmel_tx_dma(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + struct circ_buf *xmit = &port->state->xmit; + struct dma_chan *chan = atmel_port->chan_tx; + struct dma_async_tx_descriptor *desc; + struct scatterlist sgl[2], *sg, *sg_tx = &atmel_port->sg_tx; + unsigned int tx_len, part1_len, part2_len, sg_len; + dma_addr_t phys_addr; + + /* Make sure we have an idle channel */ + if (atmel_port->desc_tx != NULL) + return; + + if (!uart_circ_empty(xmit) && !uart_tx_stopped(port)) { + /* + * DMA is idle now. + * Port xmit buffer is already mapped, + * and it is one page... Just adjust + * offsets and lengths. Since it is a circular buffer, + * we have to transmit till the end, and then the rest. + * Take the port lock to get a + * consistent xmit buffer state. + */ + tx_len = CIRC_CNT_TO_END(xmit->head, + xmit->tail, + UART_XMIT_SIZE); + + if (atmel_port->fifo_size) { + /* multi data mode */ + part1_len = (tx_len & ~0x3); /* DWORD access */ + part2_len = (tx_len & 0x3); /* BYTE access */ + } else { + /* single data (legacy) mode */ + part1_len = 0; + part2_len = tx_len; /* BYTE access only */ + } + + sg_init_table(sgl, 2); + sg_len = 0; + phys_addr = sg_dma_address(sg_tx) + xmit->tail; + if (part1_len) { + sg = &sgl[sg_len++]; + sg_dma_address(sg) = phys_addr; + sg_dma_len(sg) = part1_len; + + phys_addr += part1_len; + } + + if (part2_len) { + sg = &sgl[sg_len++]; + sg_dma_address(sg) = phys_addr; + sg_dma_len(sg) = part2_len; + } + + /* + * save tx_len so atmel_complete_tx_dma() will increase + * xmit->tail correctly + */ + atmel_port->tx_len = tx_len; + + desc = dmaengine_prep_slave_sg(chan, + sgl, + sg_len, + DMA_MEM_TO_DEV, + DMA_PREP_INTERRUPT | + DMA_CTRL_ACK); + if (!desc) { + dev_err(port->dev, "Failed to send via dma!\n"); + return; + } + + dma_sync_sg_for_device(port->dev, sg_tx, 1, DMA_TO_DEVICE); + + atmel_port->desc_tx = desc; + desc->callback = atmel_complete_tx_dma; + desc->callback_param = atmel_port; + atmel_port->cookie_tx = dmaengine_submit(desc); + if (dma_submit_error(atmel_port->cookie_tx)) { + dev_err(port->dev, "dma_submit_error %d\n", + atmel_port->cookie_tx); + return; + } + + dma_async_issue_pending(chan); + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); +} + +static int atmel_prepare_tx_dma(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + struct device *mfd_dev = port->dev->parent; + dma_cap_mask_t mask; + struct dma_slave_config config; + int ret, nent; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + atmel_port->chan_tx = dma_request_slave_channel(mfd_dev, "tx"); + if (atmel_port->chan_tx == NULL) + goto chan_err; + dev_info(port->dev, "using %s for tx DMA transfers\n", + dma_chan_name(atmel_port->chan_tx)); + + spin_lock_init(&atmel_port->lock_tx); + sg_init_table(&atmel_port->sg_tx, 1); + /* UART circular tx buffer is an aligned page. */ + BUG_ON(!PAGE_ALIGNED(port->state->xmit.buf)); + sg_set_page(&atmel_port->sg_tx, + virt_to_page(port->state->xmit.buf), + UART_XMIT_SIZE, + offset_in_page(port->state->xmit.buf)); + nent = dma_map_sg(port->dev, + &atmel_port->sg_tx, + 1, + DMA_TO_DEVICE); + + if (!nent) { + dev_dbg(port->dev, "need to release resource of dma\n"); + goto chan_err; + } else { + dev_dbg(port->dev, "%s: mapped %d@%p to %pad\n", __func__, + sg_dma_len(&atmel_port->sg_tx), + port->state->xmit.buf, + &sg_dma_address(&atmel_port->sg_tx)); + } + + /* Configure the slave DMA */ + memset(&config, 0, sizeof(config)); + config.direction = DMA_MEM_TO_DEV; + config.dst_addr_width = (atmel_port->fifo_size) ? + DMA_SLAVE_BUSWIDTH_4_BYTES : + DMA_SLAVE_BUSWIDTH_1_BYTE; + config.dst_addr = port->mapbase + ATMEL_US_THR; + config.dst_maxburst = 1; + + ret = dmaengine_slave_config(atmel_port->chan_tx, + &config); + if (ret) { + dev_err(port->dev, "DMA tx slave configuration failed\n"); + goto chan_err; + } + + return 0; + +chan_err: + dev_err(port->dev, "TX channel not available, switch to pio\n"); + atmel_port->use_dma_tx = false; + if (atmel_port->chan_tx) + atmel_release_tx_dma(port); + return -EINVAL; +} + +static void atmel_complete_rx_dma(void *arg) +{ + struct uart_port *port = arg; + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + atmel_tasklet_schedule(atmel_port, &atmel_port->tasklet_rx); +} + +static void atmel_release_rx_dma(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + struct dma_chan *chan = atmel_port->chan_rx; + + if (chan) { + dmaengine_terminate_all(chan); + dma_release_channel(chan); + dma_unmap_sg(port->dev, &atmel_port->sg_rx, 1, + DMA_FROM_DEVICE); + } + + atmel_port->desc_rx = NULL; + atmel_port->chan_rx = NULL; + atmel_port->cookie_rx = -EINVAL; +} + +static void atmel_rx_from_dma(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + struct tty_port *tport = &port->state->port; + struct circ_buf *ring = &atmel_port->rx_ring; + struct dma_chan *chan = atmel_port->chan_rx; + struct dma_tx_state state; + enum dma_status dmastat; + size_t count; + + + /* Reset the UART timeout early so that we don't miss one */ + atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_STTTO); + dmastat = dmaengine_tx_status(chan, + atmel_port->cookie_rx, + &state); + /* Restart a new tasklet if DMA status is error */ + if (dmastat == DMA_ERROR) { + dev_dbg(port->dev, "Get residue error, restart tasklet\n"); + atmel_uart_writel(port, ATMEL_US_IER, ATMEL_US_TIMEOUT); + atmel_tasklet_schedule(atmel_port, &atmel_port->tasklet_rx); + return; + } + + /* CPU claims ownership of RX DMA buffer */ + dma_sync_sg_for_cpu(port->dev, + &atmel_port->sg_rx, + 1, + DMA_FROM_DEVICE); + + /* + * ring->head points to the end of data already written by the DMA. + * ring->tail points to the beginning of data to be read by the + * framework. + * The current transfer size should not be larger than the dma buffer + * length. + */ + ring->head = sg_dma_len(&atmel_port->sg_rx) - state.residue; + BUG_ON(ring->head > sg_dma_len(&atmel_port->sg_rx)); + /* + * At this point ring->head may point to the first byte right after the + * last byte of the dma buffer: + * 0 <= ring->head <= sg_dma_len(&atmel_port->sg_rx) + * + * However ring->tail must always points inside the dma buffer: + * 0 <= ring->tail <= sg_dma_len(&atmel_port->sg_rx) - 1 + * + * Since we use a ring buffer, we have to handle the case + * where head is lower than tail. In such a case, we first read from + * tail to the end of the buffer then reset tail. + */ + if (ring->head < ring->tail) { + count = sg_dma_len(&atmel_port->sg_rx) - ring->tail; + + tty_insert_flip_string(tport, ring->buf + ring->tail, count); + ring->tail = 0; + port->icount.rx += count; + } + + /* Finally we read data from tail to head */ + if (ring->tail < ring->head) { + count = ring->head - ring->tail; + + tty_insert_flip_string(tport, ring->buf + ring->tail, count); + /* Wrap ring->head if needed */ + if (ring->head >= sg_dma_len(&atmel_port->sg_rx)) + ring->head = 0; + ring->tail = ring->head; + port->icount.rx += count; + } + + /* USART retreives ownership of RX DMA buffer */ + dma_sync_sg_for_device(port->dev, + &atmel_port->sg_rx, + 1, + DMA_FROM_DEVICE); + + /* + * Drop the lock here since it might end up calling + * uart_start(), which takes the lock. + */ + spin_unlock(&port->lock); + tty_flip_buffer_push(tport); + spin_lock(&port->lock); + + atmel_uart_writel(port, ATMEL_US_IER, ATMEL_US_TIMEOUT); +} + +static int atmel_prepare_rx_dma(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + struct device *mfd_dev = port->dev->parent; + struct dma_async_tx_descriptor *desc; + dma_cap_mask_t mask; + struct dma_slave_config config; + struct circ_buf *ring; + int ret, nent; + + ring = &atmel_port->rx_ring; + + dma_cap_zero(mask); + dma_cap_set(DMA_CYCLIC, mask); + + atmel_port->chan_rx = dma_request_slave_channel(mfd_dev, "rx"); + if (atmel_port->chan_rx == NULL) + goto chan_err; + dev_info(port->dev, "using %s for rx DMA transfers\n", + dma_chan_name(atmel_port->chan_rx)); + + spin_lock_init(&atmel_port->lock_rx); + sg_init_table(&atmel_port->sg_rx, 1); + /* UART circular rx buffer is an aligned page. */ + BUG_ON(!PAGE_ALIGNED(ring->buf)); + sg_set_page(&atmel_port->sg_rx, + virt_to_page(ring->buf), + sizeof(struct atmel_uart_char) * ATMEL_SERIAL_RINGSIZE, + offset_in_page(ring->buf)); + nent = dma_map_sg(port->dev, + &atmel_port->sg_rx, + 1, + DMA_FROM_DEVICE); + + if (!nent) { + dev_dbg(port->dev, "need to release resource of dma\n"); + goto chan_err; + } else { + dev_dbg(port->dev, "%s: mapped %d@%p to %pad\n", __func__, + sg_dma_len(&atmel_port->sg_rx), + ring->buf, + &sg_dma_address(&atmel_port->sg_rx)); + } + + /* Configure the slave DMA */ + memset(&config, 0, sizeof(config)); + config.direction = DMA_DEV_TO_MEM; + config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + config.src_addr = port->mapbase + ATMEL_US_RHR; + config.src_maxburst = 1; + + ret = dmaengine_slave_config(atmel_port->chan_rx, + &config); + if (ret) { + dev_err(port->dev, "DMA rx slave configuration failed\n"); + goto chan_err; + } + /* + * Prepare a cyclic dma transfer, assign 2 descriptors, + * each one is half ring buffer size + */ + desc = dmaengine_prep_dma_cyclic(atmel_port->chan_rx, + sg_dma_address(&atmel_port->sg_rx), + sg_dma_len(&atmel_port->sg_rx), + sg_dma_len(&atmel_port->sg_rx)/2, + DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT); + if (!desc) { + dev_err(port->dev, "Preparing DMA cyclic failed\n"); + goto chan_err; + } + desc->callback = atmel_complete_rx_dma; + desc->callback_param = port; + atmel_port->desc_rx = desc; + atmel_port->cookie_rx = dmaengine_submit(desc); + if (dma_submit_error(atmel_port->cookie_rx)) { + dev_err(port->dev, "dma_submit_error %d\n", + atmel_port->cookie_rx); + goto chan_err; + } + + dma_async_issue_pending(atmel_port->chan_rx); + + return 0; + +chan_err: + dev_err(port->dev, "RX channel not available, switch to pio\n"); + atmel_port->use_dma_rx = false; + if (atmel_port->chan_rx) + atmel_release_rx_dma(port); + return -EINVAL; +} + +static void atmel_uart_timer_callback(struct timer_list *t) +{ + struct atmel_uart_port *atmel_port = from_timer(atmel_port, t, + uart_timer); + struct uart_port *port = &atmel_port->uart; + + if (!atomic_read(&atmel_port->tasklet_shutdown)) { + tasklet_schedule(&atmel_port->tasklet_rx); + mod_timer(&atmel_port->uart_timer, + jiffies + uart_poll_timeout(port)); + } +} + +/* + * receive interrupt handler. + */ +static void +atmel_handle_receive(struct uart_port *port, unsigned int pending) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + if (atmel_use_pdc_rx(port)) { + /* + * PDC receive. Just schedule the tasklet and let it + * figure out the details. + * + * TODO: We're not handling error flags correctly at + * the moment. + */ + if (pending & (ATMEL_US_ENDRX | ATMEL_US_TIMEOUT)) { + atmel_uart_writel(port, ATMEL_US_IDR, + (ATMEL_US_ENDRX | ATMEL_US_TIMEOUT)); + atmel_tasklet_schedule(atmel_port, + &atmel_port->tasklet_rx); + } + + if (pending & (ATMEL_US_RXBRK | ATMEL_US_OVRE | + ATMEL_US_FRAME | ATMEL_US_PARE)) + atmel_pdc_rxerr(port, pending); + } + + if (atmel_use_dma_rx(port)) { + if (pending & ATMEL_US_TIMEOUT) { + atmel_uart_writel(port, ATMEL_US_IDR, + ATMEL_US_TIMEOUT); + atmel_tasklet_schedule(atmel_port, + &atmel_port->tasklet_rx); + } + } + + /* Interrupt receive */ + if (pending & ATMEL_US_RXRDY) + atmel_rx_chars(port); + else if (pending & ATMEL_US_RXBRK) { + /* + * End of break detected. If it came along with a + * character, atmel_rx_chars will handle it. + */ + atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_RSTSTA); + atmel_uart_writel(port, ATMEL_US_IDR, ATMEL_US_RXBRK); + atmel_port->break_active = 0; + } +} + +/* + * transmit interrupt handler. (Transmit is IRQF_NODELAY safe) + */ +static void +atmel_handle_transmit(struct uart_port *port, unsigned int pending) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + if (pending & atmel_port->tx_done_mask) { + atmel_uart_writel(port, ATMEL_US_IDR, + atmel_port->tx_done_mask); + + /* Start RX if flag was set and FIFO is empty */ + if (atmel_port->hd_start_rx) { + if (!(atmel_uart_readl(port, ATMEL_US_CSR) + & ATMEL_US_TXEMPTY)) + dev_warn(port->dev, "Should start RX, but TX fifo is not empty\n"); + + atmel_port->hd_start_rx = false; + atmel_start_rx(port); + } + + atmel_tasklet_schedule(atmel_port, &atmel_port->tasklet_tx); + } +} + +/* + * status flags interrupt handler. + */ +static void +atmel_handle_status(struct uart_port *port, unsigned int pending, + unsigned int status) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + unsigned int status_change; + + if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC + | ATMEL_US_CTSIC)) { + status_change = status ^ atmel_port->irq_status_prev; + atmel_port->irq_status_prev = status; + + if (status_change & (ATMEL_US_RI | ATMEL_US_DSR + | ATMEL_US_DCD | ATMEL_US_CTS)) { + /* TODO: All reads to CSR will clear these interrupts! */ + if (status_change & ATMEL_US_RI) + port->icount.rng++; + if (status_change & ATMEL_US_DSR) + port->icount.dsr++; + if (status_change & ATMEL_US_DCD) + uart_handle_dcd_change(port, !(status & ATMEL_US_DCD)); + if (status_change & ATMEL_US_CTS) + uart_handle_cts_change(port, !(status & ATMEL_US_CTS)); + + wake_up_interruptible(&port->state->port.delta_msr_wait); + } + } + + if (pending & (ATMEL_US_NACK | ATMEL_US_ITERATION)) + dev_dbg(port->dev, "ISO7816 ERROR (0x%08x)\n", pending); +} + +/* + * Interrupt handler + */ +static irqreturn_t atmel_interrupt(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + unsigned int status, pending, mask, pass_counter = 0; + + spin_lock(&atmel_port->lock_suspended); + + do { + status = atmel_uart_readl(port, ATMEL_US_CSR); + mask = atmel_uart_readl(port, ATMEL_US_IMR); + pending = status & mask; + if (!pending) + break; + + if (atmel_port->suspended) { + atmel_port->pending |= pending; + atmel_port->pending_status = status; + atmel_uart_writel(port, ATMEL_US_IDR, mask); + pm_system_wakeup(); + break; + } + + atmel_handle_receive(port, pending); + atmel_handle_status(port, pending, status); + atmel_handle_transmit(port, pending); + } while (pass_counter++ < ATMEL_ISR_PASS_LIMIT); + + spin_unlock(&atmel_port->lock_suspended); + + return pass_counter ? IRQ_HANDLED : IRQ_NONE; +} + +static void atmel_release_tx_pdc(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx; + + dma_unmap_single(port->dev, + pdc->dma_addr, + pdc->dma_size, + DMA_TO_DEVICE); +} + +/* + * Called from tasklet with ENDTX and TXBUFE interrupts disabled. + */ +static void atmel_tx_pdc(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + struct circ_buf *xmit = &port->state->xmit; + struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx; + int count; + + /* nothing left to transmit? */ + if (atmel_uart_readl(port, ATMEL_PDC_TCR)) + return; + + xmit->tail += pdc->ofs; + xmit->tail &= UART_XMIT_SIZE - 1; + + port->icount.tx += pdc->ofs; + pdc->ofs = 0; + + /* more to transmit - setup next transfer */ + + /* disable PDC transmit */ + atmel_uart_writel(port, ATMEL_PDC_PTCR, ATMEL_PDC_TXTDIS); + + if (!uart_circ_empty(xmit) && !uart_tx_stopped(port)) { + dma_sync_single_for_device(port->dev, + pdc->dma_addr, + pdc->dma_size, + DMA_TO_DEVICE); + + count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); + pdc->ofs = count; + + atmel_uart_writel(port, ATMEL_PDC_TPR, + pdc->dma_addr + xmit->tail); + atmel_uart_writel(port, ATMEL_PDC_TCR, count); + /* re-enable PDC transmit */ + atmel_uart_writel(port, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN); + /* Enable interrupts */ + atmel_uart_writel(port, ATMEL_US_IER, + atmel_port->tx_done_mask); + } else { + if (atmel_uart_is_half_duplex(port)) { + /* DMA done, stop TX, start RX for RS485 */ + atmel_start_rx(port); + } + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); +} + +static int atmel_prepare_tx_pdc(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx; + struct circ_buf *xmit = &port->state->xmit; + + pdc->buf = xmit->buf; + pdc->dma_addr = dma_map_single(port->dev, + pdc->buf, + UART_XMIT_SIZE, + DMA_TO_DEVICE); + pdc->dma_size = UART_XMIT_SIZE; + pdc->ofs = 0; + + return 0; +} + +static void atmel_rx_from_ring(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + struct circ_buf *ring = &atmel_port->rx_ring; + unsigned int flg; + unsigned int status; + + while (ring->head != ring->tail) { + struct atmel_uart_char c; + + /* Make sure c is loaded after head. */ + smp_rmb(); + + c = ((struct atmel_uart_char *)ring->buf)[ring->tail]; + + ring->tail = (ring->tail + 1) & (ATMEL_SERIAL_RINGSIZE - 1); + + port->icount.rx++; + status = c.status; + flg = TTY_NORMAL; + + /* + * note that the error handling code is + * out of the main execution path + */ + if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME + | ATMEL_US_OVRE | ATMEL_US_RXBRK))) { + if (status & ATMEL_US_RXBRK) { + /* ignore side-effect */ + status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME); + + port->icount.brk++; + if (uart_handle_break(port)) + continue; + } + if (status & ATMEL_US_PARE) + port->icount.parity++; + if (status & ATMEL_US_FRAME) + port->icount.frame++; + if (status & ATMEL_US_OVRE) + port->icount.overrun++; + + status &= port->read_status_mask; + + if (status & ATMEL_US_RXBRK) + flg = TTY_BREAK; + else if (status & ATMEL_US_PARE) + flg = TTY_PARITY; + else if (status & ATMEL_US_FRAME) + flg = TTY_FRAME; + } + + + if (uart_handle_sysrq_char(port, c.ch)) + continue; + + uart_insert_char(port, status, ATMEL_US_OVRE, c.ch, flg); + } + + /* + * Drop the lock here since it might end up calling + * uart_start(), which takes the lock. + */ + spin_unlock(&port->lock); + tty_flip_buffer_push(&port->state->port); + spin_lock(&port->lock); +} + +static void atmel_release_rx_pdc(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + int i; + + for (i = 0; i < 2; i++) { + struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i]; + + dma_unmap_single(port->dev, + pdc->dma_addr, + pdc->dma_size, + DMA_FROM_DEVICE); + kfree(pdc->buf); + } +} + +static void atmel_rx_from_pdc(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + struct tty_port *tport = &port->state->port; + struct atmel_dma_buffer *pdc; + int rx_idx = atmel_port->pdc_rx_idx; + unsigned int head; + unsigned int tail; + unsigned int count; + + do { + /* Reset the UART timeout early so that we don't miss one */ + atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_STTTO); + + pdc = &atmel_port->pdc_rx[rx_idx]; + head = atmel_uart_readl(port, ATMEL_PDC_RPR) - pdc->dma_addr; + tail = pdc->ofs; + + /* If the PDC has switched buffers, RPR won't contain + * any address within the current buffer. Since head + * is unsigned, we just need a one-way comparison to + * find out. + * + * In this case, we just need to consume the entire + * buffer and resubmit it for DMA. This will clear the + * ENDRX bit as well, so that we can safely re-enable + * all interrupts below. + */ + head = min(head, pdc->dma_size); + + if (likely(head != tail)) { + dma_sync_single_for_cpu(port->dev, pdc->dma_addr, + pdc->dma_size, DMA_FROM_DEVICE); + + /* + * head will only wrap around when we recycle + * the DMA buffer, and when that happens, we + * explicitly set tail to 0. So head will + * always be greater than tail. + */ + count = head - tail; + + tty_insert_flip_string(tport, pdc->buf + pdc->ofs, + count); + + dma_sync_single_for_device(port->dev, pdc->dma_addr, + pdc->dma_size, DMA_FROM_DEVICE); + + port->icount.rx += count; + pdc->ofs = head; + } + + /* + * If the current buffer is full, we need to check if + * the next one contains any additional data. + */ + if (head >= pdc->dma_size) { + pdc->ofs = 0; + atmel_uart_writel(port, ATMEL_PDC_RNPR, pdc->dma_addr); + atmel_uart_writel(port, ATMEL_PDC_RNCR, pdc->dma_size); + + rx_idx = !rx_idx; + atmel_port->pdc_rx_idx = rx_idx; + } + } while (head >= pdc->dma_size); + + /* + * Drop the lock here since it might end up calling + * uart_start(), which takes the lock. + */ + spin_unlock(&port->lock); + tty_flip_buffer_push(tport); + spin_lock(&port->lock); + + atmel_uart_writel(port, ATMEL_US_IER, + ATMEL_US_ENDRX | ATMEL_US_TIMEOUT); +} + +static int atmel_prepare_rx_pdc(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + int i; + + for (i = 0; i < 2; i++) { + struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i]; + + pdc->buf = kmalloc(PDC_BUFFER_SIZE, GFP_KERNEL); + if (pdc->buf == NULL) { + if (i != 0) { + dma_unmap_single(port->dev, + atmel_port->pdc_rx[0].dma_addr, + PDC_BUFFER_SIZE, + DMA_FROM_DEVICE); + kfree(atmel_port->pdc_rx[0].buf); + } + atmel_port->use_pdc_rx = false; + return -ENOMEM; + } + pdc->dma_addr = dma_map_single(port->dev, + pdc->buf, + PDC_BUFFER_SIZE, + DMA_FROM_DEVICE); + pdc->dma_size = PDC_BUFFER_SIZE; + pdc->ofs = 0; + } + + atmel_port->pdc_rx_idx = 0; + + atmel_uart_writel(port, ATMEL_PDC_RPR, atmel_port->pdc_rx[0].dma_addr); + atmel_uart_writel(port, ATMEL_PDC_RCR, PDC_BUFFER_SIZE); + + atmel_uart_writel(port, ATMEL_PDC_RNPR, + atmel_port->pdc_rx[1].dma_addr); + atmel_uart_writel(port, ATMEL_PDC_RNCR, PDC_BUFFER_SIZE); + + return 0; +} + +/* + * tasklet handling tty stuff outside the interrupt handler. + */ +static void atmel_tasklet_rx_func(struct tasklet_struct *t) +{ + struct atmel_uart_port *atmel_port = from_tasklet(atmel_port, t, + tasklet_rx); + struct uart_port *port = &atmel_port->uart; + + /* The interrupt handler does not take the lock */ + spin_lock(&port->lock); + atmel_port->schedule_rx(port); + spin_unlock(&port->lock); +} + +static void atmel_tasklet_tx_func(struct tasklet_struct *t) +{ + struct atmel_uart_port *atmel_port = from_tasklet(atmel_port, t, + tasklet_tx); + struct uart_port *port = &atmel_port->uart; + + /* The interrupt handler does not take the lock */ + spin_lock(&port->lock); + atmel_port->schedule_tx(port); + spin_unlock(&port->lock); +} + +static void atmel_init_property(struct atmel_uart_port *atmel_port, + struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + + /* DMA/PDC usage specification */ + if (of_property_read_bool(np, "atmel,use-dma-rx")) { + if (of_property_read_bool(np, "dmas")) { + atmel_port->use_dma_rx = true; + atmel_port->use_pdc_rx = false; + } else { + atmel_port->use_dma_rx = false; + atmel_port->use_pdc_rx = true; + } + } else { + atmel_port->use_dma_rx = false; + atmel_port->use_pdc_rx = false; + } + + if (of_property_read_bool(np, "atmel,use-dma-tx")) { + if (of_property_read_bool(np, "dmas")) { + atmel_port->use_dma_tx = true; + atmel_port->use_pdc_tx = false; + } else { + atmel_port->use_dma_tx = false; + atmel_port->use_pdc_tx = true; + } + } else { + atmel_port->use_dma_tx = false; + atmel_port->use_pdc_tx = false; + } +} + +static void atmel_set_ops(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + if (atmel_use_dma_rx(port)) { + atmel_port->prepare_rx = &atmel_prepare_rx_dma; + atmel_port->schedule_rx = &atmel_rx_from_dma; + atmel_port->release_rx = &atmel_release_rx_dma; + } else if (atmel_use_pdc_rx(port)) { + atmel_port->prepare_rx = &atmel_prepare_rx_pdc; + atmel_port->schedule_rx = &atmel_rx_from_pdc; + atmel_port->release_rx = &atmel_release_rx_pdc; + } else { + atmel_port->prepare_rx = NULL; + atmel_port->schedule_rx = &atmel_rx_from_ring; + atmel_port->release_rx = NULL; + } + + if (atmel_use_dma_tx(port)) { + atmel_port->prepare_tx = &atmel_prepare_tx_dma; + atmel_port->schedule_tx = &atmel_tx_dma; + atmel_port->release_tx = &atmel_release_tx_dma; + } else if (atmel_use_pdc_tx(port)) { + atmel_port->prepare_tx = &atmel_prepare_tx_pdc; + atmel_port->schedule_tx = &atmel_tx_pdc; + atmel_port->release_tx = &atmel_release_tx_pdc; + } else { + atmel_port->prepare_tx = NULL; + atmel_port->schedule_tx = &atmel_tx_chars; + atmel_port->release_tx = NULL; + } +} + +/* + * Get ip name usart or uart + */ +static void atmel_get_ip_name(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + int name = atmel_uart_readl(port, ATMEL_US_NAME); + u32 version; + u32 usart, dbgu_uart, new_uart; + /* ASCII decoding for IP version */ + usart = 0x55534152; /* USAR(T) */ + dbgu_uart = 0x44424755; /* DBGU */ + new_uart = 0x55415254; /* UART */ + + /* + * Only USART devices from at91sam9260 SOC implement fractional + * baudrate. It is available for all asynchronous modes, with the + * following restriction: the sampling clock's duty cycle is not + * constant. + */ + atmel_port->has_frac_baudrate = false; + atmel_port->has_hw_timer = false; + + if (name == new_uart) { + dev_dbg(port->dev, "Uart with hw timer"); + atmel_port->has_hw_timer = true; + atmel_port->rtor = ATMEL_UA_RTOR; + } else if (name == usart) { + dev_dbg(port->dev, "Usart\n"); + atmel_port->has_frac_baudrate = true; + atmel_port->has_hw_timer = true; + atmel_port->rtor = ATMEL_US_RTOR; + version = atmel_uart_readl(port, ATMEL_US_VERSION); + switch (version) { + case 0x814: /* sama5d2 */ + fallthrough; + case 0x701: /* sama5d4 */ + atmel_port->fidi_min = 3; + atmel_port->fidi_max = 65535; + break; + case 0x502: /* sam9x5, sama5d3 */ + atmel_port->fidi_min = 3; + atmel_port->fidi_max = 2047; + break; + default: + atmel_port->fidi_min = 1; + atmel_port->fidi_max = 2047; + } + } else if (name == dbgu_uart) { + dev_dbg(port->dev, "Dbgu or uart without hw timer\n"); + } else { + /* fallback for older SoCs: use version field */ + version = atmel_uart_readl(port, ATMEL_US_VERSION); + switch (version) { + case 0x302: + case 0x10213: + case 0x10302: + dev_dbg(port->dev, "This version is usart\n"); + atmel_port->has_frac_baudrate = true; + atmel_port->has_hw_timer = true; + atmel_port->rtor = ATMEL_US_RTOR; + break; + case 0x203: + case 0x10202: + dev_dbg(port->dev, "This version is uart\n"); + break; + default: + dev_err(port->dev, "Not supported ip name nor version, set to uart\n"); + } + } +} + +/* + * Perform initialization and enable port for reception + */ +static int atmel_startup(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + int retval; + + /* + * Ensure that no interrupts are enabled otherwise when + * request_irq() is called we could get stuck trying to + * handle an unexpected interrupt + */ + atmel_uart_writel(port, ATMEL_US_IDR, -1); + atmel_port->ms_irq_enabled = false; + + /* + * Allocate the IRQ + */ + retval = request_irq(port->irq, atmel_interrupt, + IRQF_SHARED | IRQF_COND_SUSPEND, + dev_name(&pdev->dev), port); + if (retval) { + dev_err(port->dev, "atmel_startup - Can't get irq\n"); + return retval; + } + + atomic_set(&atmel_port->tasklet_shutdown, 0); + tasklet_setup(&atmel_port->tasklet_rx, atmel_tasklet_rx_func); + tasklet_setup(&atmel_port->tasklet_tx, atmel_tasklet_tx_func); + + /* + * Initialize DMA (if necessary) + */ + atmel_init_property(atmel_port, pdev); + atmel_set_ops(port); + + if (atmel_port->prepare_rx) { + retval = atmel_port->prepare_rx(port); + if (retval < 0) + atmel_set_ops(port); + } + + if (atmel_port->prepare_tx) { + retval = atmel_port->prepare_tx(port); + if (retval < 0) + atmel_set_ops(port); + } + + /* + * Enable FIFO when available + */ + if (atmel_port->fifo_size) { + unsigned int txrdym = ATMEL_US_ONE_DATA; + unsigned int rxrdym = ATMEL_US_ONE_DATA; + unsigned int fmr; + + atmel_uart_writel(port, ATMEL_US_CR, + ATMEL_US_FIFOEN | + ATMEL_US_RXFCLR | + ATMEL_US_TXFLCLR); + + if (atmel_use_dma_tx(port)) + txrdym = ATMEL_US_FOUR_DATA; + + fmr = ATMEL_US_TXRDYM(txrdym) | ATMEL_US_RXRDYM(rxrdym); + if (atmel_port->rts_high && + atmel_port->rts_low) + fmr |= ATMEL_US_FRTSC | + ATMEL_US_RXFTHRES(atmel_port->rts_high) | + ATMEL_US_RXFTHRES2(atmel_port->rts_low); + + atmel_uart_writel(port, ATMEL_US_FMR, fmr); + } + + /* Save current CSR for comparison in atmel_tasklet_func() */ + atmel_port->irq_status_prev = atmel_uart_readl(port, ATMEL_US_CSR); + + /* + * Finally, enable the serial port + */ + atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_RSTSTA | ATMEL_US_RSTRX); + /* enable xmit & rcvr */ + atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXEN | ATMEL_US_RXEN); + atmel_port->tx_stopped = false; + + timer_setup(&atmel_port->uart_timer, atmel_uart_timer_callback, 0); + + if (atmel_use_pdc_rx(port)) { + /* set UART timeout */ + if (!atmel_port->has_hw_timer) { + mod_timer(&atmel_port->uart_timer, + jiffies + uart_poll_timeout(port)); + /* set USART timeout */ + } else { + atmel_uart_writel(port, atmel_port->rtor, + PDC_RX_TIMEOUT); + atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_STTTO); + + atmel_uart_writel(port, ATMEL_US_IER, + ATMEL_US_ENDRX | ATMEL_US_TIMEOUT); + } + /* enable PDC controller */ + atmel_uart_writel(port, ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN); + } else if (atmel_use_dma_rx(port)) { + /* set UART timeout */ + if (!atmel_port->has_hw_timer) { + mod_timer(&atmel_port->uart_timer, + jiffies + uart_poll_timeout(port)); + /* set USART timeout */ + } else { + atmel_uart_writel(port, atmel_port->rtor, + PDC_RX_TIMEOUT); + atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_STTTO); + + atmel_uart_writel(port, ATMEL_US_IER, + ATMEL_US_TIMEOUT); + } + } else { + /* enable receive only */ + atmel_uart_writel(port, ATMEL_US_IER, ATMEL_US_RXRDY); + } + + return 0; +} + +/* + * Flush any TX data submitted for DMA. Called when the TX circular + * buffer is reset. + */ +static void atmel_flush_buffer(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + if (atmel_use_pdc_tx(port)) { + atmel_uart_writel(port, ATMEL_PDC_TCR, 0); + atmel_port->pdc_tx.ofs = 0; + } + /* + * in uart_flush_buffer(), the xmit circular buffer has just + * been cleared, so we have to reset tx_len accordingly. + */ + atmel_port->tx_len = 0; +} + +/* + * Disable the port + */ +static void atmel_shutdown(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + /* Disable modem control lines interrupts */ + atmel_disable_ms(port); + + /* Disable interrupts at device level */ + atmel_uart_writel(port, ATMEL_US_IDR, -1); + + /* Prevent spurious interrupts from scheduling the tasklet */ + atomic_inc(&atmel_port->tasklet_shutdown); + + /* + * Prevent any tasklets being scheduled during + * cleanup + */ + del_timer_sync(&atmel_port->uart_timer); + + /* Make sure that no interrupt is on the fly */ + synchronize_irq(port->irq); + + /* + * Clear out any scheduled tasklets before + * we destroy the buffers + */ + tasklet_kill(&atmel_port->tasklet_rx); + tasklet_kill(&atmel_port->tasklet_tx); + + /* + * Ensure everything is stopped and + * disable port and break condition. + */ + atmel_stop_rx(port); + atmel_stop_tx(port); + + atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_RSTSTA); + + /* + * Shut-down the DMA. + */ + if (atmel_port->release_rx) + atmel_port->release_rx(port); + if (atmel_port->release_tx) + atmel_port->release_tx(port); + + /* + * Reset ring buffer pointers + */ + atmel_port->rx_ring.head = 0; + atmel_port->rx_ring.tail = 0; + + /* + * Free the interrupts + */ + free_irq(port->irq, port); + + atmel_flush_buffer(port); +} + +/* + * Power / Clock management. + */ +static void atmel_serial_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + switch (state) { + case 0: + /* + * Enable the peripheral clock for this serial port. + * This is called on uart_open() or a resume event. + */ + clk_prepare_enable(atmel_port->clk); + + /* re-enable interrupts if we disabled some on suspend */ + atmel_uart_writel(port, ATMEL_US_IER, atmel_port->backup_imr); + break; + case 3: + /* Back up the interrupt mask and disable all interrupts */ + atmel_port->backup_imr = atmel_uart_readl(port, ATMEL_US_IMR); + atmel_uart_writel(port, ATMEL_US_IDR, -1); + + /* + * Disable the peripheral clock for this serial port. + * This is called on uart_close() or a suspend event. + */ + clk_disable_unprepare(atmel_port->clk); + break; + default: + dev_err(port->dev, "atmel_serial: unknown pm %d\n", state); + } +} + +/* + * Change the port parameters + */ +static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + unsigned long flags; + unsigned int old_mode, mode, imr, quot, baud, div, cd, fp = 0; + + /* save the current mode register */ + mode = old_mode = atmel_uart_readl(port, ATMEL_US_MR); + + /* reset the mode, clock divisor, parity, stop bits and data size */ + mode &= ~(ATMEL_US_USCLKS | ATMEL_US_CHRL | ATMEL_US_NBSTOP | + ATMEL_US_PAR | ATMEL_US_USMODE); + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); + + /* byte size */ + switch (termios->c_cflag & CSIZE) { + case CS5: + mode |= ATMEL_US_CHRL_5; + break; + case CS6: + mode |= ATMEL_US_CHRL_6; + break; + case CS7: + mode |= ATMEL_US_CHRL_7; + break; + default: + mode |= ATMEL_US_CHRL_8; + break; + } + + /* stop bits */ + if (termios->c_cflag & CSTOPB) + mode |= ATMEL_US_NBSTOP_2; + + /* parity */ + if (termios->c_cflag & PARENB) { + /* Mark or Space parity */ + if (termios->c_cflag & CMSPAR) { + if (termios->c_cflag & PARODD) + mode |= ATMEL_US_PAR_MARK; + else + mode |= ATMEL_US_PAR_SPACE; + } else if (termios->c_cflag & PARODD) + mode |= ATMEL_US_PAR_ODD; + else + mode |= ATMEL_US_PAR_EVEN; + } else + mode |= ATMEL_US_PAR_NONE; + + spin_lock_irqsave(&port->lock, flags); + + port->read_status_mask = ATMEL_US_OVRE; + if (termios->c_iflag & INPCK) + port->read_status_mask |= (ATMEL_US_FRAME | ATMEL_US_PARE); + if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) + port->read_status_mask |= ATMEL_US_RXBRK; + + if (atmel_use_pdc_rx(port)) + /* need to enable error interrupts */ + atmel_uart_writel(port, ATMEL_US_IER, port->read_status_mask); + + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= (ATMEL_US_FRAME | ATMEL_US_PARE); + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= ATMEL_US_RXBRK; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= ATMEL_US_OVRE; + } + /* TODO: Ignore all characters if CREAD is set.*/ + + /* update the per-port timeout */ + uart_update_timeout(port, termios->c_cflag, baud); + + /* + * save/disable interrupts. The tty layer will ensure that the + * transmitter is empty if requested by the caller, so there's + * no need to wait for it here. + */ + imr = atmel_uart_readl(port, ATMEL_US_IMR); + atmel_uart_writel(port, ATMEL_US_IDR, -1); + + /* disable receiver and transmitter */ + atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXDIS | ATMEL_US_RXDIS); + atmel_port->tx_stopped = true; + + /* mode */ + if (port->rs485.flags & SER_RS485_ENABLED) { + atmel_uart_writel(port, ATMEL_US_TTGR, + port->rs485.delay_rts_after_send); + mode |= ATMEL_US_USMODE_RS485; + } else if (port->iso7816.flags & SER_ISO7816_ENABLED) { + atmel_uart_writel(port, ATMEL_US_TTGR, port->iso7816.tg); + /* select mck clock, and output */ + mode |= ATMEL_US_USCLKS_MCK | ATMEL_US_CLKO; + /* set max iterations */ + mode |= ATMEL_US_MAX_ITER(3); + if ((port->iso7816.flags & SER_ISO7816_T_PARAM) + == SER_ISO7816_T(0)) + mode |= ATMEL_US_USMODE_ISO7816_T0; + else + mode |= ATMEL_US_USMODE_ISO7816_T1; + } else if (termios->c_cflag & CRTSCTS) { + /* RS232 with hardware handshake (RTS/CTS) */ + if (atmel_use_fifo(port) && + !mctrl_gpio_to_gpiod(atmel_port->gpios, UART_GPIO_CTS)) { + /* + * with ATMEL_US_USMODE_HWHS set, the controller will + * be able to drive the RTS pin high/low when the RX + * FIFO is above RXFTHRES/below RXFTHRES2. + * It will also disable the transmitter when the CTS + * pin is high. + * This mode is not activated if CTS pin is a GPIO + * because in this case, the transmitter is always + * disabled (there must be an internal pull-up + * responsible for this behaviour). + * If the RTS pin is a GPIO, the controller won't be + * able to drive it according to the FIFO thresholds, + * but it will be handled by the driver. + */ + mode |= ATMEL_US_USMODE_HWHS; + } else { + /* + * For platforms without FIFO, the flow control is + * handled by the driver. + */ + mode |= ATMEL_US_USMODE_NORMAL; + } + } else { + /* RS232 without hadware handshake */ + mode |= ATMEL_US_USMODE_NORMAL; + } + + /* + * Set the baud rate: + * Fractional baudrate allows to setup output frequency more + * accurately. This feature is enabled only when using normal mode. + * baudrate = selected clock / (8 * (2 - OVER) * (CD + FP / 8)) + * Currently, OVER is always set to 0 so we get + * baudrate = selected clock / (16 * (CD + FP / 8)) + * then + * 8 CD + FP = selected clock / (2 * baudrate) + */ + if (atmel_port->has_frac_baudrate) { + div = DIV_ROUND_CLOSEST(port->uartclk, baud * 2); + cd = div >> 3; + fp = div & ATMEL_US_FP_MASK; + } else { + cd = uart_get_divisor(port, baud); + } + + if (cd > 65535) { /* BRGR is 16-bit, so switch to slower clock */ + cd /= 8; + mode |= ATMEL_US_USCLKS_MCK_DIV8; + } + quot = cd | fp << ATMEL_US_FP_OFFSET; + + if (!(port->iso7816.flags & SER_ISO7816_ENABLED)) + atmel_uart_writel(port, ATMEL_US_BRGR, quot); + + /* set the mode, clock divisor, parity, stop bits and data size */ + atmel_uart_writel(port, ATMEL_US_MR, mode); + + /* + * when switching the mode, set the RTS line state according to the + * new mode, otherwise keep the former state + */ + if ((old_mode & ATMEL_US_USMODE) != (mode & ATMEL_US_USMODE)) { + unsigned int rts_state; + + if ((mode & ATMEL_US_USMODE) == ATMEL_US_USMODE_HWHS) { + /* let the hardware control the RTS line */ + rts_state = ATMEL_US_RTSDIS; + } else { + /* force RTS line to low level */ + rts_state = ATMEL_US_RTSEN; + } + + atmel_uart_writel(port, ATMEL_US_CR, rts_state); + } + + atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_RSTSTA | ATMEL_US_RSTRX); + atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXEN | ATMEL_US_RXEN); + atmel_port->tx_stopped = false; + + /* restore interrupts */ + atmel_uart_writel(port, ATMEL_US_IER, imr); + + /* CTS flow-control and modem-status interrupts */ + if (UART_ENABLE_MS(port, termios->c_cflag)) + atmel_enable_ms(port); + else + atmel_disable_ms(port); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void atmel_set_ldisc(struct uart_port *port, struct ktermios *termios) +{ + if (termios->c_line == N_PPS) { + port->flags |= UPF_HARDPPS_CD; + spin_lock_irq(&port->lock); + atmel_enable_ms(port); + spin_unlock_irq(&port->lock); + } else { + port->flags &= ~UPF_HARDPPS_CD; + if (!UART_ENABLE_MS(port, termios->c_cflag)) { + spin_lock_irq(&port->lock); + atmel_disable_ms(port); + spin_unlock_irq(&port->lock); + } + } +} + +/* + * Return string describing the specified port + */ +static const char *atmel_type(struct uart_port *port) +{ + return (port->type == PORT_ATMEL) ? "ATMEL_SERIAL" : NULL; +} + +/* + * Release the memory region(s) being used by 'port'. + */ +static void atmel_release_port(struct uart_port *port) +{ + struct platform_device *mpdev = to_platform_device(port->dev->parent); + int size = resource_size(mpdev->resource); + + release_mem_region(port->mapbase, size); + + if (port->flags & UPF_IOREMAP) { + iounmap(port->membase); + port->membase = NULL; + } +} + +/* + * Request the memory region(s) being used by 'port'. + */ +static int atmel_request_port(struct uart_port *port) +{ + struct platform_device *mpdev = to_platform_device(port->dev->parent); + int size = resource_size(mpdev->resource); + + if (!request_mem_region(port->mapbase, size, "atmel_serial")) + return -EBUSY; + + if (port->flags & UPF_IOREMAP) { + port->membase = ioremap(port->mapbase, size); + if (port->membase == NULL) { + release_mem_region(port->mapbase, size); + return -ENOMEM; + } + } + + return 0; +} + +/* + * Configure/autoconfigure the port. + */ +static void atmel_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_ATMEL; + atmel_request_port(port); + } +} + +/* + * Verify the new serial_struct (for TIOCSSERIAL). + */ +static int atmel_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + int ret = 0; + if (ser->type != PORT_UNKNOWN && ser->type != PORT_ATMEL) + ret = -EINVAL; + if (port->irq != ser->irq) + ret = -EINVAL; + if (ser->io_type != SERIAL_IO_MEM) + ret = -EINVAL; + if (port->uartclk / 16 != ser->baud_base) + ret = -EINVAL; + if (port->mapbase != (unsigned long)ser->iomem_base) + ret = -EINVAL; + if (port->iobase != ser->port) + ret = -EINVAL; + if (ser->hub6 != 0) + ret = -EINVAL; + return ret; +} + +#ifdef CONFIG_CONSOLE_POLL +static int atmel_poll_get_char(struct uart_port *port) +{ + while (!(atmel_uart_readl(port, ATMEL_US_CSR) & ATMEL_US_RXRDY)) + cpu_relax(); + + return atmel_uart_read_char(port); +} + +static void atmel_poll_put_char(struct uart_port *port, unsigned char ch) +{ + while (!(atmel_uart_readl(port, ATMEL_US_CSR) & ATMEL_US_TXRDY)) + cpu_relax(); + + atmel_uart_write_char(port, ch); +} +#endif + +static const struct uart_ops atmel_pops = { + .tx_empty = atmel_tx_empty, + .set_mctrl = atmel_set_mctrl, + .get_mctrl = atmel_get_mctrl, + .stop_tx = atmel_stop_tx, + .start_tx = atmel_start_tx, + .stop_rx = atmel_stop_rx, + .enable_ms = atmel_enable_ms, + .break_ctl = atmel_break_ctl, + .startup = atmel_startup, + .shutdown = atmel_shutdown, + .flush_buffer = atmel_flush_buffer, + .set_termios = atmel_set_termios, + .set_ldisc = atmel_set_ldisc, + .type = atmel_type, + .release_port = atmel_release_port, + .request_port = atmel_request_port, + .config_port = atmel_config_port, + .verify_port = atmel_verify_port, + .pm = atmel_serial_pm, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = atmel_poll_get_char, + .poll_put_char = atmel_poll_put_char, +#endif +}; + +/* + * Configure the port from the platform device resource info. + */ +static int atmel_init_port(struct atmel_uart_port *atmel_port, + struct platform_device *pdev) +{ + int ret; + struct uart_port *port = &atmel_port->uart; + struct platform_device *mpdev = to_platform_device(pdev->dev.parent); + + atmel_init_property(atmel_port, pdev); + atmel_set_ops(port); + + port->iotype = UPIO_MEM; + port->flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP; + port->ops = &atmel_pops; + port->fifosize = 1; + port->dev = &pdev->dev; + port->mapbase = mpdev->resource[0].start; + port->irq = mpdev->resource[1].start; + port->rs485_config = atmel_config_rs485; + port->iso7816_config = atmel_config_iso7816; + port->membase = NULL; + + memset(&atmel_port->rx_ring, 0, sizeof(atmel_port->rx_ring)); + + ret = uart_get_rs485_mode(port); + if (ret) + return ret; + + /* for console, the clock could already be configured */ + if (!atmel_port->clk) { + atmel_port->clk = clk_get(&mpdev->dev, "usart"); + if (IS_ERR(atmel_port->clk)) { + ret = PTR_ERR(atmel_port->clk); + atmel_port->clk = NULL; + return ret; + } + ret = clk_prepare_enable(atmel_port->clk); + if (ret) { + clk_put(atmel_port->clk); + atmel_port->clk = NULL; + return ret; + } + port->uartclk = clk_get_rate(atmel_port->clk); + clk_disable_unprepare(atmel_port->clk); + /* only enable clock when USART is in use */ + } + + /* + * Use TXEMPTY for interrupt when rs485 or ISO7816 else TXRDY or + * ENDTX|TXBUFE + */ + if (atmel_uart_is_half_duplex(port)) + atmel_port->tx_done_mask = ATMEL_US_TXEMPTY; + else if (atmel_use_pdc_tx(port)) { + port->fifosize = PDC_BUFFER_SIZE; + atmel_port->tx_done_mask = ATMEL_US_ENDTX | ATMEL_US_TXBUFE; + } else { + atmel_port->tx_done_mask = ATMEL_US_TXRDY; + } + + return 0; +} + +#ifdef CONFIG_SERIAL_ATMEL_CONSOLE +static void atmel_console_putchar(struct uart_port *port, int ch) +{ + while (!(atmel_uart_readl(port, ATMEL_US_CSR) & ATMEL_US_TXRDY)) + cpu_relax(); + atmel_uart_write_char(port, ch); +} + +/* + * Interrupts are disabled on entering + */ +static void atmel_console_write(struct console *co, const char *s, u_int count) +{ + struct uart_port *port = &atmel_ports[co->index].uart; + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + unsigned int status, imr; + unsigned int pdc_tx; + + /* + * First, save IMR and then disable interrupts + */ + imr = atmel_uart_readl(port, ATMEL_US_IMR); + atmel_uart_writel(port, ATMEL_US_IDR, + ATMEL_US_RXRDY | atmel_port->tx_done_mask); + + /* Store PDC transmit status and disable it */ + pdc_tx = atmel_uart_readl(port, ATMEL_PDC_PTSR) & ATMEL_PDC_TXTEN; + atmel_uart_writel(port, ATMEL_PDC_PTCR, ATMEL_PDC_TXTDIS); + + /* Make sure that tx path is actually able to send characters */ + atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXEN); + atmel_port->tx_stopped = false; + + uart_console_write(port, s, count, atmel_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore IMR + */ + do { + status = atmel_uart_readl(port, ATMEL_US_CSR); + } while (!(status & ATMEL_US_TXRDY)); + + /* Restore PDC transmit status */ + if (pdc_tx) + atmel_uart_writel(port, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN); + + /* set interrupts back the way they were */ + atmel_uart_writel(port, ATMEL_US_IER, imr); +} + +/* + * If the port was already initialised (eg, by a boot loader), + * try to determine the current setup. + */ +static void __init atmel_console_get_options(struct uart_port *port, int *baud, + int *parity, int *bits) +{ + unsigned int mr, quot; + + /* + * If the baud rate generator isn't running, the port wasn't + * initialized by the boot loader. + */ + quot = atmel_uart_readl(port, ATMEL_US_BRGR) & ATMEL_US_CD; + if (!quot) + return; + + mr = atmel_uart_readl(port, ATMEL_US_MR) & ATMEL_US_CHRL; + if (mr == ATMEL_US_CHRL_8) + *bits = 8; + else + *bits = 7; + + mr = atmel_uart_readl(port, ATMEL_US_MR) & ATMEL_US_PAR; + if (mr == ATMEL_US_PAR_EVEN) + *parity = 'e'; + else if (mr == ATMEL_US_PAR_ODD) + *parity = 'o'; + + *baud = port->uartclk / (16 * quot); +} + +static int __init atmel_console_setup(struct console *co, char *options) +{ + int ret; + struct uart_port *port = &atmel_ports[co->index].uart; + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (port->membase == NULL) { + /* Port not initialized yet - delay setup */ + return -ENODEV; + } + + ret = clk_prepare_enable(atmel_ports[co->index].clk); + if (ret) + return ret; + + atmel_uart_writel(port, ATMEL_US_IDR, -1); + atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_RSTSTA | ATMEL_US_RSTRX); + atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXEN | ATMEL_US_RXEN); + atmel_port->tx_stopped = false; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + atmel_console_get_options(port, &baud, &parity, &bits); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver atmel_uart; + +static struct console atmel_console = { + .name = ATMEL_DEVICENAME, + .write = atmel_console_write, + .device = uart_console_device, + .setup = atmel_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &atmel_uart, +}; + +#define ATMEL_CONSOLE_DEVICE (&atmel_console) + +#else +#define ATMEL_CONSOLE_DEVICE NULL +#endif + +static struct uart_driver atmel_uart = { + .owner = THIS_MODULE, + .driver_name = "atmel_serial", + .dev_name = ATMEL_DEVICENAME, + .major = SERIAL_ATMEL_MAJOR, + .minor = MINOR_START, + .nr = ATMEL_MAX_UART, + .cons = ATMEL_CONSOLE_DEVICE, +}; + +#ifdef CONFIG_PM +static bool atmel_serial_clk_will_stop(void) +{ +#ifdef CONFIG_ARCH_AT91 + return at91_suspend_entering_slow_clock(); +#else + return false; +#endif +} + +static int atmel_serial_suspend(struct platform_device *pdev, + pm_message_t state) +{ + struct uart_port *port = platform_get_drvdata(pdev); + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + if (uart_console(port) && console_suspend_enabled) { + /* Drain the TX shifter */ + while (!(atmel_uart_readl(port, ATMEL_US_CSR) & + ATMEL_US_TXEMPTY)) + cpu_relax(); + } + + if (uart_console(port) && !console_suspend_enabled) { + /* Cache register values as we won't get a full shutdown/startup + * cycle + */ + atmel_port->cache.mr = atmel_uart_readl(port, ATMEL_US_MR); + atmel_port->cache.imr = atmel_uart_readl(port, ATMEL_US_IMR); + atmel_port->cache.brgr = atmel_uart_readl(port, ATMEL_US_BRGR); + atmel_port->cache.rtor = atmel_uart_readl(port, + atmel_port->rtor); + atmel_port->cache.ttgr = atmel_uart_readl(port, ATMEL_US_TTGR); + atmel_port->cache.fmr = atmel_uart_readl(port, ATMEL_US_FMR); + atmel_port->cache.fimr = atmel_uart_readl(port, ATMEL_US_FIMR); + } + + /* we can not wake up if we're running on slow clock */ + atmel_port->may_wakeup = device_may_wakeup(&pdev->dev); + if (atmel_serial_clk_will_stop()) { + unsigned long flags; + + spin_lock_irqsave(&atmel_port->lock_suspended, flags); + atmel_port->suspended = true; + spin_unlock_irqrestore(&atmel_port->lock_suspended, flags); + device_set_wakeup_enable(&pdev->dev, 0); + } + + uart_suspend_port(&atmel_uart, port); + + return 0; +} + +static int atmel_serial_resume(struct platform_device *pdev) +{ + struct uart_port *port = platform_get_drvdata(pdev); + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + unsigned long flags; + + if (uart_console(port) && !console_suspend_enabled) { + atmel_uart_writel(port, ATMEL_US_MR, atmel_port->cache.mr); + atmel_uart_writel(port, ATMEL_US_IER, atmel_port->cache.imr); + atmel_uart_writel(port, ATMEL_US_BRGR, atmel_port->cache.brgr); + atmel_uart_writel(port, atmel_port->rtor, + atmel_port->cache.rtor); + atmel_uart_writel(port, ATMEL_US_TTGR, atmel_port->cache.ttgr); + + if (atmel_port->fifo_size) { + atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_FIFOEN | + ATMEL_US_RXFCLR | ATMEL_US_TXFLCLR); + atmel_uart_writel(port, ATMEL_US_FMR, + atmel_port->cache.fmr); + atmel_uart_writel(port, ATMEL_US_FIER, + atmel_port->cache.fimr); + } + atmel_start_rx(port); + } + + spin_lock_irqsave(&atmel_port->lock_suspended, flags); + if (atmel_port->pending) { + atmel_handle_receive(port, atmel_port->pending); + atmel_handle_status(port, atmel_port->pending, + atmel_port->pending_status); + atmel_handle_transmit(port, atmel_port->pending); + atmel_port->pending = 0; + } + atmel_port->suspended = false; + spin_unlock_irqrestore(&atmel_port->lock_suspended, flags); + + uart_resume_port(&atmel_uart, port); + device_set_wakeup_enable(&pdev->dev, atmel_port->may_wakeup); + + return 0; +} +#else +#define atmel_serial_suspend NULL +#define atmel_serial_resume NULL +#endif + +static void atmel_serial_probe_fifos(struct atmel_uart_port *atmel_port, + struct platform_device *pdev) +{ + atmel_port->fifo_size = 0; + atmel_port->rts_low = 0; + atmel_port->rts_high = 0; + + if (of_property_read_u32(pdev->dev.of_node, + "atmel,fifo-size", + &atmel_port->fifo_size)) + return; + + if (!atmel_port->fifo_size) + return; + + if (atmel_port->fifo_size < ATMEL_MIN_FIFO_SIZE) { + atmel_port->fifo_size = 0; + dev_err(&pdev->dev, "Invalid FIFO size\n"); + return; + } + + /* + * 0 <= rts_low <= rts_high <= fifo_size + * Once their CTS line asserted by the remote peer, some x86 UARTs tend + * to flush their internal TX FIFO, commonly up to 16 data, before + * actually stopping to send new data. So we try to set the RTS High + * Threshold to a reasonably high value respecting this 16 data + * empirical rule when possible. + */ + atmel_port->rts_high = max_t(int, atmel_port->fifo_size >> 1, + atmel_port->fifo_size - ATMEL_RTS_HIGH_OFFSET); + atmel_port->rts_low = max_t(int, atmel_port->fifo_size >> 2, + atmel_port->fifo_size - ATMEL_RTS_LOW_OFFSET); + + dev_info(&pdev->dev, "Using FIFO (%u data)\n", + atmel_port->fifo_size); + dev_dbg(&pdev->dev, "RTS High Threshold : %2u data\n", + atmel_port->rts_high); + dev_dbg(&pdev->dev, "RTS Low Threshold : %2u data\n", + atmel_port->rts_low); +} + +static int atmel_serial_probe(struct platform_device *pdev) +{ + struct atmel_uart_port *atmel_port; + struct device_node *np = pdev->dev.parent->of_node; + void *data; + int ret; + bool rs485_enabled; + + BUILD_BUG_ON(ATMEL_SERIAL_RINGSIZE & (ATMEL_SERIAL_RINGSIZE - 1)); + + /* + * In device tree there is no node with "atmel,at91rm9200-usart-serial" + * as compatible string. This driver is probed by at91-usart mfd driver + * which is just a wrapper over the atmel_serial driver and + * spi-at91-usart driver. All attributes needed by this driver are + * found in of_node of parent. + */ + pdev->dev.of_node = np; + + ret = of_alias_get_id(np, "serial"); + if (ret < 0) + /* port id not found in platform data nor device-tree aliases: + * auto-enumerate it */ + ret = find_first_zero_bit(atmel_ports_in_use, ATMEL_MAX_UART); + + if (ret >= ATMEL_MAX_UART) { + ret = -ENODEV; + goto err; + } + + if (test_and_set_bit(ret, atmel_ports_in_use)) { + /* port already in use */ + ret = -EBUSY; + goto err; + } + + atmel_port = &atmel_ports[ret]; + atmel_port->backup_imr = 0; + atmel_port->uart.line = ret; + atmel_port->uart.has_sysrq = IS_ENABLED(CONFIG_SERIAL_ATMEL_CONSOLE); + atmel_serial_probe_fifos(atmel_port, pdev); + + atomic_set(&atmel_port->tasklet_shutdown, 0); + spin_lock_init(&atmel_port->lock_suspended); + + ret = atmel_init_port(atmel_port, pdev); + if (ret) + goto err_clear_bit; + + atmel_port->gpios = mctrl_gpio_init(&atmel_port->uart, 0); + if (IS_ERR(atmel_port->gpios)) { + ret = PTR_ERR(atmel_port->gpios); + goto err_clear_bit; + } + + if (!atmel_use_pdc_rx(&atmel_port->uart)) { + ret = -ENOMEM; + data = kmalloc_array(ATMEL_SERIAL_RINGSIZE, + sizeof(struct atmel_uart_char), + GFP_KERNEL); + if (!data) + goto err_alloc_ring; + atmel_port->rx_ring.buf = data; + } + + rs485_enabled = atmel_port->uart.rs485.flags & SER_RS485_ENABLED; + + ret = uart_add_one_port(&atmel_uart, &atmel_port->uart); + if (ret) + goto err_add_port; + +#ifdef CONFIG_SERIAL_ATMEL_CONSOLE + if (uart_console(&atmel_port->uart) + && ATMEL_CONSOLE_DEVICE->flags & CON_ENABLED) { + /* + * The serial core enabled the clock for us, so undo + * the clk_prepare_enable() in atmel_console_setup() + */ + clk_disable_unprepare(atmel_port->clk); + } +#endif + + device_init_wakeup(&pdev->dev, 1); + platform_set_drvdata(pdev, atmel_port); + + /* + * The peripheral clock has been disabled by atmel_init_port(): + * enable it before accessing I/O registers + */ + clk_prepare_enable(atmel_port->clk); + + if (rs485_enabled) { + atmel_uart_writel(&atmel_port->uart, ATMEL_US_MR, + ATMEL_US_USMODE_NORMAL); + atmel_uart_writel(&atmel_port->uart, ATMEL_US_CR, + ATMEL_US_RTSEN); + } + + /* + * Get port name of usart or uart + */ + atmel_get_ip_name(&atmel_port->uart); + + /* + * The peripheral clock can now safely be disabled till the port + * is used + */ + clk_disable_unprepare(atmel_port->clk); + + return 0; + +err_add_port: + kfree(atmel_port->rx_ring.buf); + atmel_port->rx_ring.buf = NULL; +err_alloc_ring: + if (!uart_console(&atmel_port->uart)) { + clk_put(atmel_port->clk); + atmel_port->clk = NULL; + } +err_clear_bit: + clear_bit(atmel_port->uart.line, atmel_ports_in_use); +err: + return ret; +} + +/* + * Even if the driver is not modular, it makes sense to be able to + * unbind a device: there can be many bound devices, and there are + * situations where dynamic binding and unbinding can be useful. + * + * For example, a connected device can require a specific firmware update + * protocol that needs bitbanging on IO lines, but use the regular serial + * port in the normal case. + */ +static int atmel_serial_remove(struct platform_device *pdev) +{ + struct uart_port *port = platform_get_drvdata(pdev); + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + int ret = 0; + + tasklet_kill(&atmel_port->tasklet_rx); + tasklet_kill(&atmel_port->tasklet_tx); + + device_init_wakeup(&pdev->dev, 0); + + ret = uart_remove_one_port(&atmel_uart, port); + + kfree(atmel_port->rx_ring.buf); + + /* "port" is allocated statically, so we shouldn't free it */ + + clear_bit(port->line, atmel_ports_in_use); + + clk_put(atmel_port->clk); + atmel_port->clk = NULL; + pdev->dev.of_node = NULL; + + return ret; +} + +static struct platform_driver atmel_serial_driver = { + .probe = atmel_serial_probe, + .remove = atmel_serial_remove, + .suspend = atmel_serial_suspend, + .resume = atmel_serial_resume, + .driver = { + .name = "atmel_usart_serial", + .of_match_table = of_match_ptr(atmel_serial_dt_ids), + }, +}; + +static int __init atmel_serial_init(void) +{ + int ret; + + ret = uart_register_driver(&atmel_uart); + if (ret) + return ret; + + ret = platform_driver_register(&atmel_serial_driver); + if (ret) + uart_unregister_driver(&atmel_uart); + + return ret; +} +device_initcall(atmel_serial_init); diff --git a/drivers/tty/serial/atmel_serial.h b/drivers/tty/serial/atmel_serial.h new file mode 100644 index 000000000..0d8a0f9cc --- /dev/null +++ b/drivers/tty/serial/atmel_serial.h @@ -0,0 +1,166 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * include/linux/atmel_serial.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * USART registers. + * Based on AT91RM9200 datasheet revision E. + */ + +#ifndef ATMEL_SERIAL_H +#define ATMEL_SERIAL_H + +#define ATMEL_US_CR 0x00 /* Control Register */ +#define ATMEL_US_RSTRX BIT(2) /* Reset Receiver */ +#define ATMEL_US_RSTTX BIT(3) /* Reset Transmitter */ +#define ATMEL_US_RXEN BIT(4) /* Receiver Enable */ +#define ATMEL_US_RXDIS BIT(5) /* Receiver Disable */ +#define ATMEL_US_TXEN BIT(6) /* Transmitter Enable */ +#define ATMEL_US_TXDIS BIT(7) /* Transmitter Disable */ +#define ATMEL_US_RSTSTA BIT(8) /* Reset Status Bits */ +#define ATMEL_US_STTBRK BIT(9) /* Start Break */ +#define ATMEL_US_STPBRK BIT(10) /* Stop Break */ +#define ATMEL_US_STTTO BIT(11) /* Start Time-out */ +#define ATMEL_US_SENDA BIT(12) /* Send Address */ +#define ATMEL_US_RSTIT BIT(13) /* Reset Iterations */ +#define ATMEL_US_RSTNACK BIT(14) /* Reset Non Acknowledge */ +#define ATMEL_US_RETTO BIT(15) /* Rearm Time-out */ +#define ATMEL_US_DTREN BIT(16) /* Data Terminal Ready Enable */ +#define ATMEL_US_DTRDIS BIT(17) /* Data Terminal Ready Disable */ +#define ATMEL_US_RTSEN BIT(18) /* Request To Send Enable */ +#define ATMEL_US_RTSDIS BIT(19) /* Request To Send Disable */ +#define ATMEL_US_TXFCLR BIT(24) /* Transmit FIFO Clear */ +#define ATMEL_US_RXFCLR BIT(25) /* Receive FIFO Clear */ +#define ATMEL_US_TXFLCLR BIT(26) /* Transmit FIFO Lock Clear */ +#define ATMEL_US_FIFOEN BIT(30) /* FIFO enable */ +#define ATMEL_US_FIFODIS BIT(31) /* FIFO disable */ + +#define ATMEL_US_MR 0x04 /* Mode Register */ +#define ATMEL_US_USMODE GENMASK(3, 0) /* Mode of the USART */ +#define ATMEL_US_USMODE_NORMAL 0 +#define ATMEL_US_USMODE_RS485 1 +#define ATMEL_US_USMODE_HWHS 2 +#define ATMEL_US_USMODE_MODEM 3 +#define ATMEL_US_USMODE_ISO7816_T0 4 +#define ATMEL_US_USMODE_ISO7816_T1 6 +#define ATMEL_US_USMODE_IRDA 8 +#define ATMEL_US_USCLKS GENMASK(5, 4) /* Clock Selection */ +#define ATMEL_US_USCLKS_MCK (0 << 4) +#define ATMEL_US_USCLKS_MCK_DIV8 (1 << 4) +#define ATMEL_US_USCLKS_SCK (3 << 4) +#define ATMEL_US_CHRL GENMASK(7, 6) /* Character Length */ +#define ATMEL_US_CHRL_5 (0 << 6) +#define ATMEL_US_CHRL_6 (1 << 6) +#define ATMEL_US_CHRL_7 (2 << 6) +#define ATMEL_US_CHRL_8 (3 << 6) +#define ATMEL_US_SYNC BIT(8) /* Synchronous Mode Select */ +#define ATMEL_US_PAR GENMASK(11, 9) /* Parity Type */ +#define ATMEL_US_PAR_EVEN (0 << 9) +#define ATMEL_US_PAR_ODD (1 << 9) +#define ATMEL_US_PAR_SPACE (2 << 9) +#define ATMEL_US_PAR_MARK (3 << 9) +#define ATMEL_US_PAR_NONE (4 << 9) +#define ATMEL_US_PAR_MULTI_DROP (6 << 9) +#define ATMEL_US_NBSTOP GENMASK(13, 12) /* Number of Stop Bits */ +#define ATMEL_US_NBSTOP_1 (0 << 12) +#define ATMEL_US_NBSTOP_1_5 (1 << 12) +#define ATMEL_US_NBSTOP_2 (2 << 12) +#define ATMEL_US_CHMODE GENMASK(15, 14) /* Channel Mode */ +#define ATMEL_US_CHMODE_NORMAL (0 << 14) +#define ATMEL_US_CHMODE_ECHO (1 << 14) +#define ATMEL_US_CHMODE_LOC_LOOP (2 << 14) +#define ATMEL_US_CHMODE_REM_LOOP (3 << 14) +#define ATMEL_US_MSBF BIT(16) /* Bit Order */ +#define ATMEL_US_MODE9 BIT(17) /* 9-bit Character Length */ +#define ATMEL_US_CLKO BIT(18) /* Clock Output Select */ +#define ATMEL_US_OVER BIT(19) /* Oversampling Mode */ +#define ATMEL_US_INACK BIT(20) /* Inhibit Non Acknowledge */ +#define ATMEL_US_DSNACK BIT(21) /* Disable Successive NACK */ +#define ATMEL_US_MAX_ITER_MASK GENMASK(26, 24) /* Max Iterations */ +#define ATMEL_US_MAX_ITER(n) (((n) << 24) & ATMEL_US_MAX_ITER_MASK) +#define ATMEL_US_FILTER BIT(28) /* Infrared Receive Line Filter */ + +#define ATMEL_US_IER 0x08 /* Interrupt Enable Register */ +#define ATMEL_US_RXRDY BIT(0) /* Receiver Ready */ +#define ATMEL_US_TXRDY BIT(1) /* Transmitter Ready */ +#define ATMEL_US_RXBRK BIT(2) /* Break Received / End of Break */ +#define ATMEL_US_ENDRX BIT(3) /* End of Receiver Transfer */ +#define ATMEL_US_ENDTX BIT(4) /* End of Transmitter Transfer */ +#define ATMEL_US_OVRE BIT(5) /* Overrun Error */ +#define ATMEL_US_FRAME BIT(6) /* Framing Error */ +#define ATMEL_US_PARE BIT(7) /* Parity Error */ +#define ATMEL_US_TIMEOUT BIT(8) /* Receiver Time-out */ +#define ATMEL_US_TXEMPTY BIT(9) /* Transmitter Empty */ +#define ATMEL_US_ITERATION BIT(10) /* Max number of Repetitions Reached */ +#define ATMEL_US_TXBUFE BIT(11) /* Transmission Buffer Empty */ +#define ATMEL_US_RXBUFF BIT(12) /* Reception Buffer Full */ +#define ATMEL_US_NACK BIT(13) /* Non Acknowledge */ +#define ATMEL_US_RIIC BIT(16) /* Ring Indicator Input Change */ +#define ATMEL_US_DSRIC BIT(17) /* Data Set Ready Input Change */ +#define ATMEL_US_DCDIC BIT(18) /* Data Carrier Detect Input Change */ +#define ATMEL_US_CTSIC BIT(19) /* Clear to Send Input Change */ +#define ATMEL_US_RI BIT(20) /* RI */ +#define ATMEL_US_DSR BIT(21) /* DSR */ +#define ATMEL_US_DCD BIT(22) /* DCD */ +#define ATMEL_US_CTS BIT(23) /* CTS */ + +#define ATMEL_US_IDR 0x0c /* Interrupt Disable Register */ +#define ATMEL_US_IMR 0x10 /* Interrupt Mask Register */ +#define ATMEL_US_CSR 0x14 /* Channel Status Register */ +#define ATMEL_US_RHR 0x18 /* Receiver Holding Register */ +#define ATMEL_US_THR 0x1c /* Transmitter Holding Register */ +#define ATMEL_US_SYNH BIT(15) /* Transmit/Receive Sync */ + +#define ATMEL_US_BRGR 0x20 /* Baud Rate Generator Register */ +#define ATMEL_US_CD GENMASK(15, 0) /* Clock Divider */ +#define ATMEL_US_FP_OFFSET 16 /* Fractional Part */ +#define ATMEL_US_FP_MASK 0x7 + +#define ATMEL_US_RTOR 0x24 /* Receiver Time-out Register for USART */ +#define ATMEL_UA_RTOR 0x28 /* Receiver Time-out Register for UART */ +#define ATMEL_US_TO GENMASK(15, 0) /* Time-out Value */ + +#define ATMEL_US_TTGR 0x28 /* Transmitter Timeguard Register */ +#define ATMEL_US_TG GENMASK(7, 0) /* Timeguard Value */ + +#define ATMEL_US_FIDI 0x40 /* FI DI Ratio Register */ +#define ATMEL_US_NER 0x44 /* Number of Errors Register */ +#define ATMEL_US_IF 0x4c /* IrDA Filter Register */ + +#define ATMEL_US_CMPR 0x90 /* Comparaison Register */ +#define ATMEL_US_FMR 0xa0 /* FIFO Mode Register */ +#define ATMEL_US_TXRDYM(data) (((data) & 0x3) << 0) /* TX Ready Mode */ +#define ATMEL_US_RXRDYM(data) (((data) & 0x3) << 4) /* RX Ready Mode */ +#define ATMEL_US_ONE_DATA 0x0 +#define ATMEL_US_TWO_DATA 0x1 +#define ATMEL_US_FOUR_DATA 0x2 +#define ATMEL_US_FRTSC BIT(7) /* FIFO RTS pin Control */ +#define ATMEL_US_TXFTHRES(thr) (((thr) & 0x3f) << 8) /* TX FIFO Threshold */ +#define ATMEL_US_RXFTHRES(thr) (((thr) & 0x3f) << 16) /* RX FIFO Threshold */ +#define ATMEL_US_RXFTHRES2(thr) (((thr) & 0x3f) << 24) /* RX FIFO Threshold2 */ + +#define ATMEL_US_FLR 0xa4 /* FIFO Level Register */ +#define ATMEL_US_TXFL(reg) (((reg) >> 0) & 0x3f) /* TX FIFO Level */ +#define ATMEL_US_RXFL(reg) (((reg) >> 16) & 0x3f) /* RX FIFO Level */ + +#define ATMEL_US_FIER 0xa8 /* FIFO Interrupt Enable Register */ +#define ATMEL_US_FIDR 0xac /* FIFO Interrupt Disable Register */ +#define ATMEL_US_FIMR 0xb0 /* FIFO Interrupt Mask Register */ +#define ATMEL_US_FESR 0xb4 /* FIFO Event Status Register */ +#define ATMEL_US_TXFEF BIT(0) /* Transmit FIFO Empty Flag */ +#define ATMEL_US_TXFFF BIT(1) /* Transmit FIFO Full Flag */ +#define ATMEL_US_TXFTHF BIT(2) /* Transmit FIFO Threshold Flag */ +#define ATMEL_US_RXFEF BIT(3) /* Receive FIFO Empty Flag */ +#define ATMEL_US_RXFFF BIT(4) /* Receive FIFO Full Flag */ +#define ATMEL_US_RXFTHF BIT(5) /* Receive FIFO Threshold Flag */ +#define ATMEL_US_TXFPTEF BIT(6) /* Transmit FIFO Pointer Error Flag */ +#define ATMEL_US_RXFPTEF BIT(7) /* Receive FIFO Pointer Error Flag */ +#define ATMEL_US_TXFLOCK BIT(8) /* Transmit FIFO Lock (FESR only) */ +#define ATMEL_US_RXFTHF2 BIT(9) /* Receive FIFO Threshold Flag 2 */ + +#define ATMEL_US_NAME 0xf0 /* Ip Name */ +#define ATMEL_US_VERSION 0xfc /* Ip Version */ + +#endif diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c new file mode 100644 index 000000000..5674da2b7 --- /dev/null +++ b/drivers/tty/serial/bcm63xx_uart.c @@ -0,0 +1,924 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Derived from many drivers using generic_serial interface. + * + * Copyright (C) 2008 Maxime Bizon + * + * Serial driver for BCM63xx integrated UART. + * + * Hardware flow control was _not_ tested since I only have RX/TX on + * my board. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define BCM63XX_NR_UARTS 2 + +static struct uart_port ports[BCM63XX_NR_UARTS]; + +/* + * rx interrupt mask / stat + * + * mask: + * - rx fifo full + * - rx fifo above threshold + * - rx fifo not empty for too long + */ +#define UART_RX_INT_MASK (UART_IR_MASK(UART_IR_RXOVER) | \ + UART_IR_MASK(UART_IR_RXTHRESH) | \ + UART_IR_MASK(UART_IR_RXTIMEOUT)) + +#define UART_RX_INT_STAT (UART_IR_STAT(UART_IR_RXOVER) | \ + UART_IR_STAT(UART_IR_RXTHRESH) | \ + UART_IR_STAT(UART_IR_RXTIMEOUT)) + +/* + * tx interrupt mask / stat + * + * mask: + * - tx fifo empty + * - tx fifo below threshold + */ +#define UART_TX_INT_MASK (UART_IR_MASK(UART_IR_TXEMPTY) | \ + UART_IR_MASK(UART_IR_TXTRESH)) + +#define UART_TX_INT_STAT (UART_IR_STAT(UART_IR_TXEMPTY) | \ + UART_IR_STAT(UART_IR_TXTRESH)) + +/* + * external input interrupt + * + * mask: any edge on CTS, DCD + */ +#define UART_EXTINP_INT_MASK (UART_EXTINP_IRMASK(UART_EXTINP_IR_CTS) | \ + UART_EXTINP_IRMASK(UART_EXTINP_IR_DCD)) + +/* + * handy uart register accessor + */ +static inline unsigned int bcm_uart_readl(struct uart_port *port, + unsigned int offset) +{ + return __raw_readl(port->membase + offset); +} + +static inline void bcm_uart_writel(struct uart_port *port, + unsigned int value, unsigned int offset) +{ + __raw_writel(value, port->membase + offset); +} + +/* + * serial core request to check if uart tx fifo is empty + */ +static unsigned int bcm_uart_tx_empty(struct uart_port *port) +{ + unsigned int val; + + val = bcm_uart_readl(port, UART_IR_REG); + return (val & UART_IR_STAT(UART_IR_TXEMPTY)) ? 1 : 0; +} + +/* + * serial core request to set RTS and DTR pin state and loopback mode + */ +static void bcm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + unsigned int val; + + val = bcm_uart_readl(port, UART_MCTL_REG); + val &= ~(UART_MCTL_DTR_MASK | UART_MCTL_RTS_MASK); + /* invert of written value is reflected on the pin */ + if (!(mctrl & TIOCM_DTR)) + val |= UART_MCTL_DTR_MASK; + if (!(mctrl & TIOCM_RTS)) + val |= UART_MCTL_RTS_MASK; + bcm_uart_writel(port, val, UART_MCTL_REG); + + val = bcm_uart_readl(port, UART_CTL_REG); + if (mctrl & TIOCM_LOOP) + val |= UART_CTL_LOOPBACK_MASK; + else + val &= ~UART_CTL_LOOPBACK_MASK; + bcm_uart_writel(port, val, UART_CTL_REG); +} + +/* + * serial core request to return RI, CTS, DCD and DSR pin state + */ +static unsigned int bcm_uart_get_mctrl(struct uart_port *port) +{ + unsigned int val, mctrl; + + mctrl = 0; + val = bcm_uart_readl(port, UART_EXTINP_REG); + if (val & UART_EXTINP_RI_MASK) + mctrl |= TIOCM_RI; + if (val & UART_EXTINP_CTS_MASK) + mctrl |= TIOCM_CTS; + if (val & UART_EXTINP_DCD_MASK) + mctrl |= TIOCM_CD; + if (val & UART_EXTINP_DSR_MASK) + mctrl |= TIOCM_DSR; + return mctrl; +} + +/* + * serial core request to disable tx ASAP (used for flow control) + */ +static void bcm_uart_stop_tx(struct uart_port *port) +{ + unsigned int val; + + val = bcm_uart_readl(port, UART_CTL_REG); + val &= ~(UART_CTL_TXEN_MASK); + bcm_uart_writel(port, val, UART_CTL_REG); + + val = bcm_uart_readl(port, UART_IR_REG); + val &= ~UART_TX_INT_MASK; + bcm_uart_writel(port, val, UART_IR_REG); +} + +/* + * serial core request to (re)enable tx + */ +static void bcm_uart_start_tx(struct uart_port *port) +{ + unsigned int val; + + val = bcm_uart_readl(port, UART_IR_REG); + val |= UART_TX_INT_MASK; + bcm_uart_writel(port, val, UART_IR_REG); + + val = bcm_uart_readl(port, UART_CTL_REG); + val |= UART_CTL_TXEN_MASK; + bcm_uart_writel(port, val, UART_CTL_REG); +} + +/* + * serial core request to stop rx, called before port shutdown + */ +static void bcm_uart_stop_rx(struct uart_port *port) +{ + unsigned int val; + + val = bcm_uart_readl(port, UART_IR_REG); + val &= ~UART_RX_INT_MASK; + bcm_uart_writel(port, val, UART_IR_REG); +} + +/* + * serial core request to enable modem status interrupt reporting + */ +static void bcm_uart_enable_ms(struct uart_port *port) +{ + unsigned int val; + + val = bcm_uart_readl(port, UART_IR_REG); + val |= UART_IR_MASK(UART_IR_EXTIP); + bcm_uart_writel(port, val, UART_IR_REG); +} + +/* + * serial core request to start/stop emitting break char + */ +static void bcm_uart_break_ctl(struct uart_port *port, int ctl) +{ + unsigned long flags; + unsigned int val; + + spin_lock_irqsave(&port->lock, flags); + + val = bcm_uart_readl(port, UART_CTL_REG); + if (ctl) + val |= UART_CTL_XMITBRK_MASK; + else + val &= ~UART_CTL_XMITBRK_MASK; + bcm_uart_writel(port, val, UART_CTL_REG); + + spin_unlock_irqrestore(&port->lock, flags); +} + +/* + * return port type in string format + */ +static const char *bcm_uart_type(struct uart_port *port) +{ + return (port->type == PORT_BCM63XX) ? "bcm63xx_uart" : NULL; +} + +/* + * read all chars in rx fifo and send them to core + */ +static void bcm_uart_do_rx(struct uart_port *port) +{ + struct tty_port *tty_port = &port->state->port; + unsigned int max_count; + + /* limit number of char read in interrupt, should not be + * higher than fifo size anyway since we're much faster than + * serial port */ + max_count = 32; + do { + unsigned int iestat, c, cstat; + char flag; + + /* get overrun/fifo empty information from ier + * register */ + iestat = bcm_uart_readl(port, UART_IR_REG); + + if (unlikely(iestat & UART_IR_STAT(UART_IR_RXOVER))) { + unsigned int val; + + /* fifo reset is required to clear + * interrupt */ + val = bcm_uart_readl(port, UART_CTL_REG); + val |= UART_CTL_RSTRXFIFO_MASK; + bcm_uart_writel(port, val, UART_CTL_REG); + + port->icount.overrun++; + tty_insert_flip_char(tty_port, 0, TTY_OVERRUN); + } + + if (!(iestat & UART_IR_STAT(UART_IR_RXNOTEMPTY))) + break; + + cstat = c = bcm_uart_readl(port, UART_FIFO_REG); + port->icount.rx++; + flag = TTY_NORMAL; + c &= 0xff; + + if (unlikely((cstat & UART_FIFO_ANYERR_MASK))) { + /* do stats first */ + if (cstat & UART_FIFO_BRKDET_MASK) { + port->icount.brk++; + if (uart_handle_break(port)) + continue; + } + + if (cstat & UART_FIFO_PARERR_MASK) + port->icount.parity++; + if (cstat & UART_FIFO_FRAMEERR_MASK) + port->icount.frame++; + + /* update flag wrt read_status_mask */ + cstat &= port->read_status_mask; + if (cstat & UART_FIFO_BRKDET_MASK) + flag = TTY_BREAK; + if (cstat & UART_FIFO_FRAMEERR_MASK) + flag = TTY_FRAME; + if (cstat & UART_FIFO_PARERR_MASK) + flag = TTY_PARITY; + } + + if (uart_handle_sysrq_char(port, c)) + continue; + + + if ((cstat & port->ignore_status_mask) == 0) + tty_insert_flip_char(tty_port, c, flag); + + } while (--max_count); + + spin_unlock(&port->lock); + tty_flip_buffer_push(tty_port); + spin_lock(&port->lock); +} + +/* + * fill tx fifo with chars to send, stop when fifo is about to be full + * or when all chars have been sent. + */ +static void bcm_uart_do_tx(struct uart_port *port) +{ + struct circ_buf *xmit; + unsigned int val, max_count; + + if (port->x_char) { + bcm_uart_writel(port, port->x_char, UART_FIFO_REG); + port->icount.tx++; + port->x_char = 0; + return; + } + + if (uart_tx_stopped(port)) { + bcm_uart_stop_tx(port); + return; + } + + xmit = &port->state->xmit; + if (uart_circ_empty(xmit)) + goto txq_empty; + + val = bcm_uart_readl(port, UART_MCTL_REG); + val = (val & UART_MCTL_TXFIFOFILL_MASK) >> UART_MCTL_TXFIFOFILL_SHIFT; + max_count = port->fifosize - val; + + while (max_count--) { + unsigned int c; + + c = xmit->buf[xmit->tail]; + bcm_uart_writel(port, c, UART_FIFO_REG); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + goto txq_empty; + return; + +txq_empty: + /* nothing to send, disable transmit interrupt */ + val = bcm_uart_readl(port, UART_IR_REG); + val &= ~UART_TX_INT_MASK; + bcm_uart_writel(port, val, UART_IR_REG); + return; +} + +/* + * process uart interrupt + */ +static irqreturn_t bcm_uart_interrupt(int irq, void *dev_id) +{ + struct uart_port *port; + unsigned int irqstat; + + port = dev_id; + spin_lock(&port->lock); + + irqstat = bcm_uart_readl(port, UART_IR_REG); + if (irqstat & UART_RX_INT_STAT) + bcm_uart_do_rx(port); + + if (irqstat & UART_TX_INT_STAT) + bcm_uart_do_tx(port); + + if (irqstat & UART_IR_MASK(UART_IR_EXTIP)) { + unsigned int estat; + + estat = bcm_uart_readl(port, UART_EXTINP_REG); + if (estat & UART_EXTINP_IRSTAT(UART_EXTINP_IR_CTS)) + uart_handle_cts_change(port, + estat & UART_EXTINP_CTS_MASK); + if (estat & UART_EXTINP_IRSTAT(UART_EXTINP_IR_DCD)) + uart_handle_dcd_change(port, + estat & UART_EXTINP_DCD_MASK); + } + + spin_unlock(&port->lock); + return IRQ_HANDLED; +} + +/* + * enable rx & tx operation on uart + */ +static void bcm_uart_enable(struct uart_port *port) +{ + unsigned int val; + + val = bcm_uart_readl(port, UART_CTL_REG); + val |= (UART_CTL_BRGEN_MASK | UART_CTL_TXEN_MASK | UART_CTL_RXEN_MASK); + bcm_uart_writel(port, val, UART_CTL_REG); +} + +/* + * disable rx & tx operation on uart + */ +static void bcm_uart_disable(struct uart_port *port) +{ + unsigned int val; + + val = bcm_uart_readl(port, UART_CTL_REG); + val &= ~(UART_CTL_BRGEN_MASK | UART_CTL_TXEN_MASK | + UART_CTL_RXEN_MASK); + bcm_uart_writel(port, val, UART_CTL_REG); +} + +/* + * clear all unread data in rx fifo and unsent data in tx fifo + */ +static void bcm_uart_flush(struct uart_port *port) +{ + unsigned int val; + + /* empty rx and tx fifo */ + val = bcm_uart_readl(port, UART_CTL_REG); + val |= UART_CTL_RSTRXFIFO_MASK | UART_CTL_RSTTXFIFO_MASK; + bcm_uart_writel(port, val, UART_CTL_REG); + + /* read any pending char to make sure all irq status are + * cleared */ + (void)bcm_uart_readl(port, UART_FIFO_REG); +} + +/* + * serial core request to initialize uart and start rx operation + */ +static int bcm_uart_startup(struct uart_port *port) +{ + unsigned int val; + int ret; + + /* mask all irq and flush port */ + bcm_uart_disable(port); + bcm_uart_writel(port, 0, UART_IR_REG); + bcm_uart_flush(port); + + /* clear any pending external input interrupt */ + (void)bcm_uart_readl(port, UART_EXTINP_REG); + + /* set rx/tx fifo thresh to fifo half size */ + val = bcm_uart_readl(port, UART_MCTL_REG); + val &= ~(UART_MCTL_RXFIFOTHRESH_MASK | UART_MCTL_TXFIFOTHRESH_MASK); + val |= (port->fifosize / 2) << UART_MCTL_RXFIFOTHRESH_SHIFT; + val |= (port->fifosize / 2) << UART_MCTL_TXFIFOTHRESH_SHIFT; + bcm_uart_writel(port, val, UART_MCTL_REG); + + /* set rx fifo timeout to 1 char time */ + val = bcm_uart_readl(port, UART_CTL_REG); + val &= ~UART_CTL_RXTMOUTCNT_MASK; + val |= 1 << UART_CTL_RXTMOUTCNT_SHIFT; + bcm_uart_writel(port, val, UART_CTL_REG); + + /* report any edge on dcd and cts */ + val = UART_EXTINP_INT_MASK; + val |= UART_EXTINP_DCD_NOSENSE_MASK; + val |= UART_EXTINP_CTS_NOSENSE_MASK; + bcm_uart_writel(port, val, UART_EXTINP_REG); + + /* register irq and enable rx interrupts */ + ret = request_irq(port->irq, bcm_uart_interrupt, 0, + dev_name(port->dev), port); + if (ret) + return ret; + bcm_uart_writel(port, UART_RX_INT_MASK, UART_IR_REG); + bcm_uart_enable(port); + return 0; +} + +/* + * serial core request to flush & disable uart + */ +static void bcm_uart_shutdown(struct uart_port *port) +{ + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + bcm_uart_writel(port, 0, UART_IR_REG); + spin_unlock_irqrestore(&port->lock, flags); + + bcm_uart_disable(port); + bcm_uart_flush(port); + free_irq(port->irq, port); +} + +/* + * serial core request to change current uart setting + */ +static void bcm_uart_set_termios(struct uart_port *port, + struct ktermios *new, + struct ktermios *old) +{ + unsigned int ctl, baud, quot, ier; + unsigned long flags; + int tries; + + spin_lock_irqsave(&port->lock, flags); + + /* Drain the hot tub fully before we power it off for the winter. */ + for (tries = 3; !bcm_uart_tx_empty(port) && tries; tries--) + mdelay(10); + + /* disable uart while changing speed */ + bcm_uart_disable(port); + bcm_uart_flush(port); + + /* update Control register */ + ctl = bcm_uart_readl(port, UART_CTL_REG); + ctl &= ~UART_CTL_BITSPERSYM_MASK; + + switch (new->c_cflag & CSIZE) { + case CS5: + ctl |= (0 << UART_CTL_BITSPERSYM_SHIFT); + break; + case CS6: + ctl |= (1 << UART_CTL_BITSPERSYM_SHIFT); + break; + case CS7: + ctl |= (2 << UART_CTL_BITSPERSYM_SHIFT); + break; + default: + ctl |= (3 << UART_CTL_BITSPERSYM_SHIFT); + break; + } + + ctl &= ~UART_CTL_STOPBITS_MASK; + if (new->c_cflag & CSTOPB) + ctl |= UART_CTL_STOPBITS_2; + else + ctl |= UART_CTL_STOPBITS_1; + + ctl &= ~(UART_CTL_RXPAREN_MASK | UART_CTL_TXPAREN_MASK); + if (new->c_cflag & PARENB) + ctl |= (UART_CTL_RXPAREN_MASK | UART_CTL_TXPAREN_MASK); + ctl &= ~(UART_CTL_RXPAREVEN_MASK | UART_CTL_TXPAREVEN_MASK); + if (new->c_cflag & PARODD) + ctl |= (UART_CTL_RXPAREVEN_MASK | UART_CTL_TXPAREVEN_MASK); + bcm_uart_writel(port, ctl, UART_CTL_REG); + + /* update Baudword register */ + baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16); + quot = uart_get_divisor(port, baud) - 1; + bcm_uart_writel(port, quot, UART_BAUD_REG); + + /* update Interrupt register */ + ier = bcm_uart_readl(port, UART_IR_REG); + + ier &= ~UART_IR_MASK(UART_IR_EXTIP); + if (UART_ENABLE_MS(port, new->c_cflag)) + ier |= UART_IR_MASK(UART_IR_EXTIP); + + bcm_uart_writel(port, ier, UART_IR_REG); + + /* update read/ignore mask */ + port->read_status_mask = UART_FIFO_VALID_MASK; + if (new->c_iflag & INPCK) { + port->read_status_mask |= UART_FIFO_FRAMEERR_MASK; + port->read_status_mask |= UART_FIFO_PARERR_MASK; + } + if (new->c_iflag & (IGNBRK | BRKINT)) + port->read_status_mask |= UART_FIFO_BRKDET_MASK; + + port->ignore_status_mask = 0; + if (new->c_iflag & IGNPAR) + port->ignore_status_mask |= UART_FIFO_PARERR_MASK; + if (new->c_iflag & IGNBRK) + port->ignore_status_mask |= UART_FIFO_BRKDET_MASK; + if (!(new->c_cflag & CREAD)) + port->ignore_status_mask |= UART_FIFO_VALID_MASK; + + uart_update_timeout(port, new->c_cflag, baud); + bcm_uart_enable(port); + spin_unlock_irqrestore(&port->lock, flags); +} + +/* + * serial core request to claim uart iomem + */ +static int bcm_uart_request_port(struct uart_port *port) +{ + /* UARTs always present */ + return 0; +} + +/* + * serial core request to release uart iomem + */ +static void bcm_uart_release_port(struct uart_port *port) +{ + /* Nothing to release ... */ +} + +/* + * serial core request to do any port required autoconfiguration + */ +static void bcm_uart_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + if (bcm_uart_request_port(port)) + return; + port->type = PORT_BCM63XX; + } +} + +/* + * serial core request to check that port information in serinfo are + * suitable + */ +static int bcm_uart_verify_port(struct uart_port *port, + struct serial_struct *serinfo) +{ + if (port->type != PORT_BCM63XX) + return -EINVAL; + if (port->irq != serinfo->irq) + return -EINVAL; + if (port->iotype != serinfo->io_type) + return -EINVAL; + if (port->mapbase != (unsigned long)serinfo->iomem_base) + return -EINVAL; + return 0; +} + +/* serial core callbacks */ +static const struct uart_ops bcm_uart_ops = { + .tx_empty = bcm_uart_tx_empty, + .get_mctrl = bcm_uart_get_mctrl, + .set_mctrl = bcm_uart_set_mctrl, + .start_tx = bcm_uart_start_tx, + .stop_tx = bcm_uart_stop_tx, + .stop_rx = bcm_uart_stop_rx, + .enable_ms = bcm_uart_enable_ms, + .break_ctl = bcm_uart_break_ctl, + .startup = bcm_uart_startup, + .shutdown = bcm_uart_shutdown, + .set_termios = bcm_uart_set_termios, + .type = bcm_uart_type, + .release_port = bcm_uart_release_port, + .request_port = bcm_uart_request_port, + .config_port = bcm_uart_config_port, + .verify_port = bcm_uart_verify_port, +}; + + + +#ifdef CONFIG_SERIAL_BCM63XX_CONSOLE +static void wait_for_xmitr(struct uart_port *port) +{ + unsigned int tmout; + + /* Wait up to 10ms for the character(s) to be sent. */ + tmout = 10000; + while (--tmout) { + unsigned int val; + + val = bcm_uart_readl(port, UART_IR_REG); + if (val & UART_IR_STAT(UART_IR_TXEMPTY)) + break; + udelay(1); + } + + /* Wait up to 1s for flow control if necessary */ + if (port->flags & UPF_CONS_FLOW) { + tmout = 1000000; + while (--tmout) { + unsigned int val; + + val = bcm_uart_readl(port, UART_EXTINP_REG); + if (val & UART_EXTINP_CTS_MASK) + break; + udelay(1); + } + } +} + +/* + * output given char + */ +static void bcm_console_putchar(struct uart_port *port, int ch) +{ + wait_for_xmitr(port); + bcm_uart_writel(port, ch, UART_FIFO_REG); +} + +/* + * console core request to output given string + */ +static void bcm_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_port *port; + unsigned long flags; + int locked; + + port = &ports[co->index]; + + local_irq_save(flags); + if (port->sysrq) { + /* bcm_uart_interrupt() already took the lock */ + locked = 0; + } else if (oops_in_progress) { + locked = spin_trylock(&port->lock); + } else { + spin_lock(&port->lock); + locked = 1; + } + + /* call helper to deal with \r\n */ + uart_console_write(port, s, count, bcm_console_putchar); + + /* and wait for char to be transmitted */ + wait_for_xmitr(port); + + if (locked) + spin_unlock(&port->lock); + local_irq_restore(flags); +} + +/* + * console core request to setup given console, find matching uart + * port and setup it. + */ +static int bcm_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index < 0 || co->index >= BCM63XX_NR_UARTS) + return -EINVAL; + port = &ports[co->index]; + if (!port->membase) + return -ENODEV; + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver bcm_uart_driver; + +static struct console bcm63xx_console = { + .name = "ttyS", + .write = bcm_console_write, + .device = uart_console_device, + .setup = bcm_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &bcm_uart_driver, +}; + +static int __init bcm63xx_console_init(void) +{ + register_console(&bcm63xx_console); + return 0; +} + +console_initcall(bcm63xx_console_init); + +static void bcm_early_write(struct console *con, const char *s, unsigned n) +{ + struct earlycon_device *dev = con->data; + + uart_console_write(&dev->port, s, n, bcm_console_putchar); + wait_for_xmitr(&dev->port); +} + +static int __init bcm_early_console_setup(struct earlycon_device *device, + const char *opt) +{ + if (!device->port.membase) + return -ENODEV; + + device->con->write = bcm_early_write; + return 0; +} + +OF_EARLYCON_DECLARE(bcm63xx_uart, "brcm,bcm6345-uart", bcm_early_console_setup); + +#define BCM63XX_CONSOLE (&bcm63xx_console) +#else +#define BCM63XX_CONSOLE NULL +#endif /* CONFIG_SERIAL_BCM63XX_CONSOLE */ + +static struct uart_driver bcm_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "bcm63xx_uart", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .nr = BCM63XX_NR_UARTS, + .cons = BCM63XX_CONSOLE, +}; + +/* + * platform driver probe/remove callback + */ +static int bcm_uart_probe(struct platform_device *pdev) +{ + struct resource *res_mem, *res_irq; + struct uart_port *port; + struct clk *clk; + int ret; + + if (pdev->dev.of_node) { + pdev->id = of_alias_get_id(pdev->dev.of_node, "serial"); + + if (pdev->id < 0) + pdev->id = of_alias_get_id(pdev->dev.of_node, "uart"); + } + + if (pdev->id < 0 || pdev->id >= BCM63XX_NR_UARTS) + return -EINVAL; + + port = &ports[pdev->id]; + if (port->membase) + return -EBUSY; + memset(port, 0, sizeof(*port)); + + res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res_mem) + return -ENODEV; + + port->mapbase = res_mem->start; + port->membase = devm_ioremap_resource(&pdev->dev, res_mem); + if (IS_ERR(port->membase)) + return PTR_ERR(port->membase); + + res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res_irq) + return -ENODEV; + + clk = clk_get(&pdev->dev, "refclk"); + if (IS_ERR(clk) && pdev->dev.of_node) + clk = of_clk_get(pdev->dev.of_node, 0); + + if (IS_ERR(clk)) + return -ENODEV; + + port->iotype = UPIO_MEM; + port->irq = res_irq->start; + port->ops = &bcm_uart_ops; + port->flags = UPF_BOOT_AUTOCONF; + port->dev = &pdev->dev; + port->fifosize = 16; + port->uartclk = clk_get_rate(clk) / 2; + port->line = pdev->id; + port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_BCM63XX_CONSOLE); + clk_put(clk); + + ret = uart_add_one_port(&bcm_uart_driver, port); + if (ret) { + ports[pdev->id].membase = NULL; + return ret; + } + platform_set_drvdata(pdev, port); + return 0; +} + +static int bcm_uart_remove(struct platform_device *pdev) +{ + struct uart_port *port; + + port = platform_get_drvdata(pdev); + uart_remove_one_port(&bcm_uart_driver, port); + /* mark port as free */ + ports[pdev->id].membase = NULL; + return 0; +} + +static const struct of_device_id bcm63xx_of_match[] = { + { .compatible = "brcm,bcm6345-uart" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, bcm63xx_of_match); + +/* + * platform driver stuff + */ +static struct platform_driver bcm_uart_platform_driver = { + .probe = bcm_uart_probe, + .remove = bcm_uart_remove, + .driver = { + .name = "bcm63xx_uart", + .of_match_table = bcm63xx_of_match, + }, +}; + +static int __init bcm_uart_init(void) +{ + int ret; + + ret = uart_register_driver(&bcm_uart_driver); + if (ret) + return ret; + + ret = platform_driver_register(&bcm_uart_platform_driver); + if (ret) + uart_unregister_driver(&bcm_uart_driver); + + return ret; +} + +static void __exit bcm_uart_exit(void) +{ + platform_driver_unregister(&bcm_uart_platform_driver); + uart_unregister_driver(&bcm_uart_driver); +} + +module_init(bcm_uart_init); +module_exit(bcm_uart_exit); + +MODULE_AUTHOR("Maxime Bizon "); +MODULE_DESCRIPTION("Broadcom 63xx integrated uart driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c new file mode 100644 index 000000000..95abc6faa --- /dev/null +++ b/drivers/tty/serial/clps711x.c @@ -0,0 +1,562 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver for CLPS711x serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright 1999 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "serial_mctrl_gpio.h" + +#define UART_CLPS711X_DEVNAME "ttyCL" +#define UART_CLPS711X_NR 2 +#define UART_CLPS711X_MAJOR 204 +#define UART_CLPS711X_MINOR 40 + +#define UARTDR_OFFSET (0x00) +#define UBRLCR_OFFSET (0x40) + +#define UARTDR_FRMERR (1 << 8) +#define UARTDR_PARERR (1 << 9) +#define UARTDR_OVERR (1 << 10) + +#define UBRLCR_BAUD_MASK ((1 << 12) - 1) +#define UBRLCR_BREAK (1 << 12) +#define UBRLCR_PRTEN (1 << 13) +#define UBRLCR_EVENPRT (1 << 14) +#define UBRLCR_XSTOP (1 << 15) +#define UBRLCR_FIFOEN (1 << 16) +#define UBRLCR_WRDLEN5 (0 << 17) +#define UBRLCR_WRDLEN6 (1 << 17) +#define UBRLCR_WRDLEN7 (2 << 17) +#define UBRLCR_WRDLEN8 (3 << 17) +#define UBRLCR_WRDLEN_MASK (3 << 17) + +struct clps711x_port { + struct uart_port port; + unsigned int tx_enabled; + int rx_irq; + struct regmap *syscon; + struct mctrl_gpios *gpios; +}; + +static struct uart_driver clps711x_uart = { + .owner = THIS_MODULE, + .driver_name = UART_CLPS711X_DEVNAME, + .dev_name = UART_CLPS711X_DEVNAME, + .major = UART_CLPS711X_MAJOR, + .minor = UART_CLPS711X_MINOR, + .nr = UART_CLPS711X_NR, +}; + +static void uart_clps711x_stop_tx(struct uart_port *port) +{ + struct clps711x_port *s = dev_get_drvdata(port->dev); + + if (s->tx_enabled) { + disable_irq(port->irq); + s->tx_enabled = 0; + } +} + +static void uart_clps711x_start_tx(struct uart_port *port) +{ + struct clps711x_port *s = dev_get_drvdata(port->dev); + + if (!s->tx_enabled) { + s->tx_enabled = 1; + enable_irq(port->irq); + } +} + +static irqreturn_t uart_clps711x_int_rx(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + struct clps711x_port *s = dev_get_drvdata(port->dev); + unsigned int status, flg; + u16 ch; + + for (;;) { + u32 sysflg = 0; + + regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg); + if (sysflg & SYSFLG_URXFE) + break; + + ch = readw(port->membase + UARTDR_OFFSET); + status = ch & (UARTDR_FRMERR | UARTDR_PARERR | UARTDR_OVERR); + ch &= 0xff; + + port->icount.rx++; + flg = TTY_NORMAL; + + if (unlikely(status)) { + if (status & UARTDR_PARERR) + port->icount.parity++; + else if (status & UARTDR_FRMERR) + port->icount.frame++; + else if (status & UARTDR_OVERR) + port->icount.overrun++; + + status &= port->read_status_mask; + + if (status & UARTDR_PARERR) + flg = TTY_PARITY; + else if (status & UARTDR_FRMERR) + flg = TTY_FRAME; + else if (status & UARTDR_OVERR) + flg = TTY_OVERRUN; + } + + if (uart_handle_sysrq_char(port, ch)) + continue; + + if (status & port->ignore_status_mask) + continue; + + uart_insert_char(port, status, UARTDR_OVERR, ch, flg); + } + + tty_flip_buffer_push(&port->state->port); + + return IRQ_HANDLED; +} + +static irqreturn_t uart_clps711x_int_tx(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + struct clps711x_port *s = dev_get_drvdata(port->dev); + struct circ_buf *xmit = &port->state->xmit; + + if (port->x_char) { + writew(port->x_char, port->membase + UARTDR_OFFSET); + port->icount.tx++; + port->x_char = 0; + return IRQ_HANDLED; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + if (s->tx_enabled) { + disable_irq_nosync(port->irq); + s->tx_enabled = 0; + } + return IRQ_HANDLED; + } + + while (!uart_circ_empty(xmit)) { + u32 sysflg = 0; + + writew(xmit->buf[xmit->tail], port->membase + UARTDR_OFFSET); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + + regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg); + if (sysflg & SYSFLG_UTXFF) + break; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + return IRQ_HANDLED; +} + +static unsigned int uart_clps711x_tx_empty(struct uart_port *port) +{ + struct clps711x_port *s = dev_get_drvdata(port->dev); + u32 sysflg = 0; + + regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg); + + return (sysflg & SYSFLG_UBUSY) ? 0 : TIOCSER_TEMT; +} + +static unsigned int uart_clps711x_get_mctrl(struct uart_port *port) +{ + unsigned int result = TIOCM_DSR | TIOCM_CTS | TIOCM_CAR; + struct clps711x_port *s = dev_get_drvdata(port->dev); + + return mctrl_gpio_get(s->gpios, &result); +} + +static void uart_clps711x_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct clps711x_port *s = dev_get_drvdata(port->dev); + + mctrl_gpio_set(s->gpios, mctrl); +} + +static void uart_clps711x_break_ctl(struct uart_port *port, int break_state) +{ + unsigned int ubrlcr; + + ubrlcr = readl(port->membase + UBRLCR_OFFSET); + if (break_state) + ubrlcr |= UBRLCR_BREAK; + else + ubrlcr &= ~UBRLCR_BREAK; + writel(ubrlcr, port->membase + UBRLCR_OFFSET); +} + +static void uart_clps711x_set_ldisc(struct uart_port *port, + struct ktermios *termios) +{ + if (!port->line) { + struct clps711x_port *s = dev_get_drvdata(port->dev); + + regmap_update_bits(s->syscon, SYSCON_OFFSET, SYSCON1_SIREN, + (termios->c_line == N_IRDA) ? SYSCON1_SIREN : 0); + } +} + +static int uart_clps711x_startup(struct uart_port *port) +{ + struct clps711x_port *s = dev_get_drvdata(port->dev); + + /* Disable break */ + writel(readl(port->membase + UBRLCR_OFFSET) & ~UBRLCR_BREAK, + port->membase + UBRLCR_OFFSET); + + /* Enable the port */ + return regmap_update_bits(s->syscon, SYSCON_OFFSET, + SYSCON_UARTEN, SYSCON_UARTEN); +} + +static void uart_clps711x_shutdown(struct uart_port *port) +{ + struct clps711x_port *s = dev_get_drvdata(port->dev); + + /* Disable the port */ + regmap_update_bits(s->syscon, SYSCON_OFFSET, SYSCON_UARTEN, 0); +} + +static void uart_clps711x_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + u32 ubrlcr; + unsigned int baud, quot; + + /* Mask termios capabilities we don't support */ + termios->c_cflag &= ~CMSPAR; + termios->c_iflag &= ~(BRKINT | IGNBRK); + + /* Ask the core to calculate the divisor for us */ + baud = uart_get_baud_rate(port, termios, old, port->uartclk / 4096, + port->uartclk / 16); + quot = uart_get_divisor(port, baud); + + switch (termios->c_cflag & CSIZE) { + case CS5: + ubrlcr = UBRLCR_WRDLEN5; + break; + case CS6: + ubrlcr = UBRLCR_WRDLEN6; + break; + case CS7: + ubrlcr = UBRLCR_WRDLEN7; + break; + case CS8: + default: + ubrlcr = UBRLCR_WRDLEN8; + break; + } + + if (termios->c_cflag & CSTOPB) + ubrlcr |= UBRLCR_XSTOP; + + if (termios->c_cflag & PARENB) { + ubrlcr |= UBRLCR_PRTEN; + if (!(termios->c_cflag & PARODD)) + ubrlcr |= UBRLCR_EVENPRT; + } + + /* Enable FIFO */ + ubrlcr |= UBRLCR_FIFOEN; + + /* Set read status mask */ + port->read_status_mask = UARTDR_OVERR; + if (termios->c_iflag & INPCK) + port->read_status_mask |= UARTDR_PARERR | UARTDR_FRMERR; + + /* Set status ignore mask */ + port->ignore_status_mask = 0; + if (!(termios->c_cflag & CREAD)) + port->ignore_status_mask |= UARTDR_OVERR | UARTDR_PARERR | + UARTDR_FRMERR; + + uart_update_timeout(port, termios->c_cflag, baud); + + writel(ubrlcr | (quot - 1), port->membase + UBRLCR_OFFSET); +} + +static const char *uart_clps711x_type(struct uart_port *port) +{ + return (port->type == PORT_CLPS711X) ? "CLPS711X" : NULL; +} + +static void uart_clps711x_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) + port->type = PORT_CLPS711X; +} + +static void uart_clps711x_nop_void(struct uart_port *port) +{ +} + +static int uart_clps711x_nop_int(struct uart_port *port) +{ + return 0; +} + +static const struct uart_ops uart_clps711x_ops = { + .tx_empty = uart_clps711x_tx_empty, + .set_mctrl = uart_clps711x_set_mctrl, + .get_mctrl = uart_clps711x_get_mctrl, + .stop_tx = uart_clps711x_stop_tx, + .start_tx = uart_clps711x_start_tx, + .stop_rx = uart_clps711x_nop_void, + .break_ctl = uart_clps711x_break_ctl, + .set_ldisc = uart_clps711x_set_ldisc, + .startup = uart_clps711x_startup, + .shutdown = uart_clps711x_shutdown, + .set_termios = uart_clps711x_set_termios, + .type = uart_clps711x_type, + .config_port = uart_clps711x_config_port, + .release_port = uart_clps711x_nop_void, + .request_port = uart_clps711x_nop_int, +}; + +#ifdef CONFIG_SERIAL_CLPS711X_CONSOLE +static void uart_clps711x_console_putchar(struct uart_port *port, int ch) +{ + struct clps711x_port *s = dev_get_drvdata(port->dev); + u32 sysflg = 0; + + /* Wait for FIFO is not full */ + do { + regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg); + } while (sysflg & SYSFLG_UTXFF); + + writew(ch, port->membase + UARTDR_OFFSET); +} + +static void uart_clps711x_console_write(struct console *co, const char *c, + unsigned n) +{ + struct uart_port *port = clps711x_uart.state[co->index].uart_port; + struct clps711x_port *s = dev_get_drvdata(port->dev); + u32 sysflg = 0; + + uart_console_write(port, c, n, uart_clps711x_console_putchar); + + /* Wait for transmitter to become empty */ + do { + regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg); + } while (sysflg & SYSFLG_UBUSY); +} + +static int uart_clps711x_console_setup(struct console *co, char *options) +{ + int baud = 38400, bits = 8, parity = 'n', flow = 'n'; + int ret, index = co->index; + struct clps711x_port *s; + struct uart_port *port; + unsigned int quot; + u32 ubrlcr; + + if (index < 0 || index >= UART_CLPS711X_NR) + return -EINVAL; + + port = clps711x_uart.state[index].uart_port; + if (!port) + return -ENODEV; + + s = dev_get_drvdata(port->dev); + + if (!options) { + u32 syscon = 0; + + regmap_read(s->syscon, SYSCON_OFFSET, &syscon); + if (syscon & SYSCON_UARTEN) { + ubrlcr = readl(port->membase + UBRLCR_OFFSET); + + if (ubrlcr & UBRLCR_PRTEN) { + if (ubrlcr & UBRLCR_EVENPRT) + parity = 'e'; + else + parity = 'o'; + } + + if ((ubrlcr & UBRLCR_WRDLEN_MASK) == UBRLCR_WRDLEN7) + bits = 7; + + quot = ubrlcr & UBRLCR_BAUD_MASK; + baud = port->uartclk / (16 * (quot + 1)); + } + } else + uart_parse_options(options, &baud, &parity, &bits, &flow); + + ret = uart_set_options(port, co, baud, parity, bits, flow); + if (ret) + return ret; + + return regmap_update_bits(s->syscon, SYSCON_OFFSET, + SYSCON_UARTEN, SYSCON_UARTEN); +} + +static struct console clps711x_console = { + .name = UART_CLPS711X_DEVNAME, + .device = uart_console_device, + .write = uart_clps711x_console_write, + .setup = uart_clps711x_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, +}; +#endif + +static int uart_clps711x_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct clps711x_port *s; + struct resource *res; + struct clk *uart_clk; + int irq, ret; + + s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL); + if (!s) + return -ENOMEM; + + uart_clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(uart_clk)) + return PTR_ERR(uart_clk); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + s->port.membase = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(s->port.membase)) + return PTR_ERR(s->port.membase); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + s->port.irq = irq; + + s->rx_irq = platform_get_irq(pdev, 1); + if (s->rx_irq < 0) + return s->rx_irq; + + s->syscon = syscon_regmap_lookup_by_phandle(np, "syscon"); + if (IS_ERR(s->syscon)) + return PTR_ERR(s->syscon); + + s->port.line = of_alias_get_id(np, "serial"); + s->port.dev = &pdev->dev; + s->port.iotype = UPIO_MEM32; + s->port.mapbase = res->start; + s->port.type = PORT_CLPS711X; + s->port.fifosize = 16; + s->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_CLPS711X_CONSOLE); + s->port.flags = UPF_SKIP_TEST | UPF_FIXED_TYPE; + s->port.uartclk = clk_get_rate(uart_clk); + s->port.ops = &uart_clps711x_ops; + + platform_set_drvdata(pdev, s); + + s->gpios = mctrl_gpio_init_noauto(&pdev->dev, 0); + if (IS_ERR(s->gpios)) + return PTR_ERR(s->gpios); + + ret = uart_add_one_port(&clps711x_uart, &s->port); + if (ret) + return ret; + + /* Disable port */ + if (!uart_console(&s->port)) + regmap_update_bits(s->syscon, SYSCON_OFFSET, SYSCON_UARTEN, 0); + + s->tx_enabled = 1; + + ret = devm_request_irq(&pdev->dev, s->port.irq, uart_clps711x_int_tx, 0, + dev_name(&pdev->dev), &s->port); + if (ret) { + uart_remove_one_port(&clps711x_uart, &s->port); + return ret; + } + + ret = devm_request_irq(&pdev->dev, s->rx_irq, uart_clps711x_int_rx, 0, + dev_name(&pdev->dev), &s->port); + if (ret) + uart_remove_one_port(&clps711x_uart, &s->port); + + return ret; +} + +static int uart_clps711x_remove(struct platform_device *pdev) +{ + struct clps711x_port *s = platform_get_drvdata(pdev); + + return uart_remove_one_port(&clps711x_uart, &s->port); +} + +static const struct of_device_id __maybe_unused clps711x_uart_dt_ids[] = { + { .compatible = "cirrus,ep7209-uart", }, + { } +}; +MODULE_DEVICE_TABLE(of, clps711x_uart_dt_ids); + +static struct platform_driver clps711x_uart_platform = { + .driver = { + .name = "clps711x-uart", + .of_match_table = of_match_ptr(clps711x_uart_dt_ids), + }, + .probe = uart_clps711x_probe, + .remove = uart_clps711x_remove, +}; + +static int __init uart_clps711x_init(void) +{ + int ret; + +#ifdef CONFIG_SERIAL_CLPS711X_CONSOLE + clps711x_uart.cons = &clps711x_console; + clps711x_console.data = &clps711x_uart; +#endif + + ret = uart_register_driver(&clps711x_uart); + if (ret) + return ret; + + return platform_driver_register(&clps711x_uart_platform); +} +module_init(uart_clps711x_init); + +static void __exit uart_clps711x_exit(void) +{ + platform_driver_unregister(&clps711x_uart_platform); + uart_unregister_driver(&clps711x_uart); +} +module_exit(uart_clps711x_exit); + +MODULE_AUTHOR("Deep Blue Solutions Ltd"); +MODULE_DESCRIPTION("CLPS711X serial driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/cpm_uart/Makefile b/drivers/tty/serial/cpm_uart/Makefile new file mode 100644 index 000000000..3f3a6ed02 --- /dev/null +++ b/drivers/tty/serial/cpm_uart/Makefile @@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for the Motorola 8xx FEC ethernet controller +# + +obj-$(CONFIG_SERIAL_CPM) += cpm_uart.o + +# Select the correct platform objects. +cpm_uart-objs-$(CONFIG_CPM2) += cpm_uart_cpm2.o +cpm_uart-objs-$(CONFIG_CPM1) += cpm_uart_cpm1.o + +cpm_uart-objs := cpm_uart_core.o $(cpm_uart-objs-y) diff --git a/drivers/tty/serial/cpm_uart/cpm_uart.h b/drivers/tty/serial/cpm_uart/cpm_uart.h new file mode 100644 index 000000000..6113b953c --- /dev/null +++ b/drivers/tty/serial/cpm_uart/cpm_uart.h @@ -0,0 +1,143 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Driver for CPM (SCC/SMC) serial ports + * + * Copyright (C) 2004 Freescale Semiconductor, Inc. + * + * 2006 (c) MontaVista Software, Inc. + * Vitaly Bordug + */ +#ifndef CPM_UART_H +#define CPM_UART_H + +#include +#include + +struct gpio_desc; + +#if defined(CONFIG_CPM2) +#include "cpm_uart_cpm2.h" +#elif defined(CONFIG_CPM1) +#include "cpm_uart_cpm1.h" +#endif + +#define SERIAL_CPM_MAJOR 204 +#define SERIAL_CPM_MINOR 46 + +#define IS_SMC(pinfo) (pinfo->flags & FLAG_SMC) +#define IS_DISCARDING(pinfo) (pinfo->flags & FLAG_DISCARDING) +#define FLAG_DISCARDING 0x00000004 /* when set, don't discard */ +#define FLAG_SMC 0x00000002 +#define FLAG_CONSOLE 0x00000001 + +#define UART_SMC1 fsid_smc1_uart +#define UART_SMC2 fsid_smc2_uart +#define UART_SCC1 fsid_scc1_uart +#define UART_SCC2 fsid_scc2_uart +#define UART_SCC3 fsid_scc3_uart +#define UART_SCC4 fsid_scc4_uart + +#define UART_NR fs_uart_nr + +#define RX_NUM_FIFO 4 +#define RX_BUF_SIZE 32 +#define TX_NUM_FIFO 4 +#define TX_BUF_SIZE 32 + +#define SCC_WAIT_CLOSING 100 + +#define GPIO_CTS 0 +#define GPIO_RTS 1 +#define GPIO_DCD 2 +#define GPIO_DSR 3 +#define GPIO_DTR 4 +#define GPIO_RI 5 + +#define NUM_GPIOS (GPIO_RI+1) + +struct uart_cpm_port { + struct uart_port port; + u16 rx_nrfifos; + u16 rx_fifosize; + u16 tx_nrfifos; + u16 tx_fifosize; + smc_t __iomem *smcp; + smc_uart_t __iomem *smcup; + scc_t __iomem *sccp; + scc_uart_t __iomem *sccup; + cbd_t __iomem *rx_bd_base; + cbd_t __iomem *rx_cur; + cbd_t __iomem *tx_bd_base; + cbd_t __iomem *tx_cur; + unsigned char *tx_buf; + unsigned char *rx_buf; + u32 flags; + struct clk *clk; + u8 brg; + uint dp_addr; + void *mem_addr; + dma_addr_t dma_addr; + u32 mem_size; + /* wait on close if needed */ + int wait_closing; + /* value to combine with opcode to form cpm command */ + u32 command; + struct gpio_desc *gpios[NUM_GPIOS]; +}; + +extern int cpm_uart_nr; +extern struct uart_cpm_port cpm_uart_ports[UART_NR]; + +/* these are located in their respective files */ +void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd); +void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port, + struct device_node *np); +void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram); +int cpm_uart_init_portdesc(void); +int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con); +void cpm_uart_freebuf(struct uart_cpm_port *pinfo); + +void smc1_lineif(struct uart_cpm_port *pinfo); +void smc2_lineif(struct uart_cpm_port *pinfo); +void scc1_lineif(struct uart_cpm_port *pinfo); +void scc2_lineif(struct uart_cpm_port *pinfo); +void scc3_lineif(struct uart_cpm_port *pinfo); +void scc4_lineif(struct uart_cpm_port *pinfo); + +/* + virtual to phys transtalion +*/ +static inline unsigned long cpu2cpm_addr(void *addr, + struct uart_cpm_port *pinfo) +{ + int offset; + u32 val = (u32)addr; + u32 mem = (u32)pinfo->mem_addr; + /* sane check */ + if (likely(val >= mem && val < mem + pinfo->mem_size)) { + offset = val - mem; + return pinfo->dma_addr + offset; + } + /* something nasty happened */ + BUG(); + return 0; +} + +static inline void *cpm2cpu_addr(unsigned long addr, + struct uart_cpm_port *pinfo) +{ + int offset; + u32 val = addr; + u32 dma = (u32)pinfo->dma_addr; + /* sane check */ + if (likely(val >= dma && val < dma + pinfo->mem_size)) { + offset = val - dma; + return pinfo->mem_addr + offset; + } + /* something nasty happened */ + BUG(); + return NULL; +} + + +#endif /* CPM_UART_H */ diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c new file mode 100644 index 000000000..f72722246 --- /dev/null +++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c @@ -0,0 +1,1476 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver for CPM (SCC/SMC) serial ports; core driver + * + * Based on arch/ppc/cpm2_io/uart.c by Dan Malek + * Based on ppc8xx.c by Thomas Gleixner + * Based on drivers/serial/amba.c by Russell King + * + * Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2) + * Pantelis Antoniou (panto@intracom.gr) (CPM1) + * + * Copyright (C) 2004, 2007 Freescale Semiconductor, Inc. + * (C) 2004 Intracom, S.A. + * (C) 2005-2006 MontaVista Software, Inc. + * Vitaly Bordug + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include + +#include "cpm_uart.h" + + +/**************************************************************/ + +static int cpm_uart_tx_pump(struct uart_port *port); +static void cpm_uart_init_smc(struct uart_cpm_port *pinfo); +static void cpm_uart_init_scc(struct uart_cpm_port *pinfo); +static void cpm_uart_initbd(struct uart_cpm_port *pinfo); + +/**************************************************************/ + +#define HW_BUF_SPD_THRESHOLD 2400 + +/* + * Check, if transmit buffers are processed +*/ +static unsigned int cpm_uart_tx_empty(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = + container_of(port, struct uart_cpm_port, port); + cbd_t __iomem *bdp = pinfo->tx_bd_base; + int ret = 0; + + while (1) { + if (in_be16(&bdp->cbd_sc) & BD_SC_READY) + break; + + if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) { + ret = TIOCSER_TEMT; + break; + } + bdp++; + } + + pr_debug("CPM uart[%d]:tx_empty: %d\n", port->line, ret); + + return ret; +} + +static void cpm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_cpm_port *pinfo = + container_of(port, struct uart_cpm_port, port); + + if (pinfo->gpios[GPIO_RTS]) + gpiod_set_value(pinfo->gpios[GPIO_RTS], !(mctrl & TIOCM_RTS)); + + if (pinfo->gpios[GPIO_DTR]) + gpiod_set_value(pinfo->gpios[GPIO_DTR], !(mctrl & TIOCM_DTR)); +} + +static unsigned int cpm_uart_get_mctrl(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = + container_of(port, struct uart_cpm_port, port); + unsigned int mctrl = TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; + + if (pinfo->gpios[GPIO_CTS]) { + if (gpiod_get_value(pinfo->gpios[GPIO_CTS])) + mctrl &= ~TIOCM_CTS; + } + + if (pinfo->gpios[GPIO_DSR]) { + if (gpiod_get_value(pinfo->gpios[GPIO_DSR])) + mctrl &= ~TIOCM_DSR; + } + + if (pinfo->gpios[GPIO_DCD]) { + if (gpiod_get_value(pinfo->gpios[GPIO_DCD])) + mctrl &= ~TIOCM_CAR; + } + + if (pinfo->gpios[GPIO_RI]) { + if (!gpiod_get_value(pinfo->gpios[GPIO_RI])) + mctrl |= TIOCM_RNG; + } + + return mctrl; +} + +/* + * Stop transmitter + */ +static void cpm_uart_stop_tx(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = + container_of(port, struct uart_cpm_port, port); + smc_t __iomem *smcp = pinfo->smcp; + scc_t __iomem *sccp = pinfo->sccp; + + pr_debug("CPM uart[%d]:stop tx\n", port->line); + + if (IS_SMC(pinfo)) + clrbits8(&smcp->smc_smcm, SMCM_TX); + else + clrbits16(&sccp->scc_sccm, UART_SCCM_TX); +} + +/* + * Start transmitter + */ +static void cpm_uart_start_tx(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = + container_of(port, struct uart_cpm_port, port); + smc_t __iomem *smcp = pinfo->smcp; + scc_t __iomem *sccp = pinfo->sccp; + + pr_debug("CPM uart[%d]:start tx\n", port->line); + + if (IS_SMC(pinfo)) { + if (in_8(&smcp->smc_smcm) & SMCM_TX) + return; + } else { + if (in_be16(&sccp->scc_sccm) & UART_SCCM_TX) + return; + } + + if (cpm_uart_tx_pump(port) != 0) { + if (IS_SMC(pinfo)) { + setbits8(&smcp->smc_smcm, SMCM_TX); + } else { + setbits16(&sccp->scc_sccm, UART_SCCM_TX); + } + } +} + +/* + * Stop receiver + */ +static void cpm_uart_stop_rx(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = + container_of(port, struct uart_cpm_port, port); + smc_t __iomem *smcp = pinfo->smcp; + scc_t __iomem *sccp = pinfo->sccp; + + pr_debug("CPM uart[%d]:stop rx\n", port->line); + + if (IS_SMC(pinfo)) + clrbits8(&smcp->smc_smcm, SMCM_RX); + else + clrbits16(&sccp->scc_sccm, UART_SCCM_RX); +} + +/* + * Generate a break. + */ +static void cpm_uart_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_cpm_port *pinfo = + container_of(port, struct uart_cpm_port, port); + + pr_debug("CPM uart[%d]:break ctrl, break_state: %d\n", port->line, + break_state); + + if (break_state) + cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX); + else + cpm_line_cr_cmd(pinfo, CPM_CR_RESTART_TX); +} + +/* + * Transmit characters, refill buffer descriptor, if possible + */ +static void cpm_uart_int_tx(struct uart_port *port) +{ + pr_debug("CPM uart[%d]:TX INT\n", port->line); + + cpm_uart_tx_pump(port); +} + +#ifdef CONFIG_CONSOLE_POLL +static int serial_polled; +#endif + +/* + * Receive characters + */ +static void cpm_uart_int_rx(struct uart_port *port) +{ + int i; + unsigned char ch; + u8 *cp; + struct tty_port *tport = &port->state->port; + struct uart_cpm_port *pinfo = + container_of(port, struct uart_cpm_port, port); + cbd_t __iomem *bdp; + u16 status; + unsigned int flg; + + pr_debug("CPM uart[%d]:RX INT\n", port->line); + + /* Just loop through the closed BDs and copy the characters into + * the buffer. + */ + bdp = pinfo->rx_cur; + for (;;) { +#ifdef CONFIG_CONSOLE_POLL + if (unlikely(serial_polled)) { + serial_polled = 0; + return; + } +#endif + /* get status */ + status = in_be16(&bdp->cbd_sc); + /* If this one is empty, return happy */ + if (status & BD_SC_EMPTY) + break; + + /* get number of characters, and check spce in flip-buffer */ + i = in_be16(&bdp->cbd_datlen); + + /* If we have not enough room in tty flip buffer, then we try + * later, which will be the next rx-interrupt or a timeout + */ + if (tty_buffer_request_room(tport, i) < i) { + printk(KERN_WARNING "No room in flip buffer\n"); + return; + } + + /* get pointer */ + cp = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo); + + /* loop through the buffer */ + while (i-- > 0) { + ch = *cp++; + port->icount.rx++; + flg = TTY_NORMAL; + + if (status & + (BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV)) + goto handle_error; + if (uart_handle_sysrq_char(port, ch)) + continue; +#ifdef CONFIG_CONSOLE_POLL + if (unlikely(serial_polled)) { + serial_polled = 0; + return; + } +#endif + error_return: + tty_insert_flip_char(tport, ch, flg); + + } /* End while (i--) */ + + /* This BD is ready to be used again. Clear status. get next */ + clrbits16(&bdp->cbd_sc, BD_SC_BR | BD_SC_FR | BD_SC_PR | + BD_SC_OV | BD_SC_ID); + setbits16(&bdp->cbd_sc, BD_SC_EMPTY); + + if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) + bdp = pinfo->rx_bd_base; + else + bdp++; + + } /* End for (;;) */ + + /* Write back buffer pointer */ + pinfo->rx_cur = bdp; + + /* activate BH processing */ + tty_flip_buffer_push(tport); + + return; + + /* Error processing */ + + handle_error: + /* Statistics */ + if (status & BD_SC_BR) + port->icount.brk++; + if (status & BD_SC_PR) + port->icount.parity++; + if (status & BD_SC_FR) + port->icount.frame++; + if (status & BD_SC_OV) + port->icount.overrun++; + + /* Mask out ignored conditions */ + status &= port->read_status_mask; + + /* Handle the remaining ones */ + if (status & BD_SC_BR) + flg = TTY_BREAK; + else if (status & BD_SC_PR) + flg = TTY_PARITY; + else if (status & BD_SC_FR) + flg = TTY_FRAME; + + /* overrun does not affect the current character ! */ + if (status & BD_SC_OV) { + ch = 0; + flg = TTY_OVERRUN; + /* We skip this buffer */ + /* CHECK: Is really nothing senseful there */ + /* ASSUMPTION: it contains nothing valid */ + i = 0; + } + port->sysrq = 0; + goto error_return; +} + +/* + * Asynchron mode interrupt handler + */ +static irqreturn_t cpm_uart_int(int irq, void *data) +{ + u8 events; + struct uart_port *port = data; + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + smc_t __iomem *smcp = pinfo->smcp; + scc_t __iomem *sccp = pinfo->sccp; + + pr_debug("CPM uart[%d]:IRQ\n", port->line); + + if (IS_SMC(pinfo)) { + events = in_8(&smcp->smc_smce); + out_8(&smcp->smc_smce, events); + if (events & SMCM_BRKE) + uart_handle_break(port); + if (events & SMCM_RX) + cpm_uart_int_rx(port); + if (events & SMCM_TX) + cpm_uart_int_tx(port); + } else { + events = in_be16(&sccp->scc_scce); + out_be16(&sccp->scc_scce, events); + if (events & UART_SCCM_BRKE) + uart_handle_break(port); + if (events & UART_SCCM_RX) + cpm_uart_int_rx(port); + if (events & UART_SCCM_TX) + cpm_uart_int_tx(port); + } + return (events) ? IRQ_HANDLED : IRQ_NONE; +} + +static int cpm_uart_startup(struct uart_port *port) +{ + int retval; + struct uart_cpm_port *pinfo = + container_of(port, struct uart_cpm_port, port); + + pr_debug("CPM uart[%d]:startup\n", port->line); + + /* If the port is not the console, make sure rx is disabled. */ + if (!(pinfo->flags & FLAG_CONSOLE)) { + /* Disable UART rx */ + if (IS_SMC(pinfo)) { + clrbits16(&pinfo->smcp->smc_smcmr, SMCMR_REN); + clrbits8(&pinfo->smcp->smc_smcm, SMCM_RX); + } else { + clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR); + clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_RX); + } + cpm_uart_initbd(pinfo); + if (IS_SMC(pinfo)) { + out_be32(&pinfo->smcup->smc_rstate, 0); + out_be32(&pinfo->smcup->smc_tstate, 0); + out_be16(&pinfo->smcup->smc_rbptr, + in_be16(&pinfo->smcup->smc_rbase)); + out_be16(&pinfo->smcup->smc_tbptr, + in_be16(&pinfo->smcup->smc_tbase)); + } else { + cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX); + } + } + /* Install interrupt handler. */ + retval = request_irq(port->irq, cpm_uart_int, 0, "cpm_uart", port); + if (retval) + return retval; + + /* Startup rx-int */ + if (IS_SMC(pinfo)) { + setbits8(&pinfo->smcp->smc_smcm, SMCM_RX); + setbits16(&pinfo->smcp->smc_smcmr, (SMCMR_REN | SMCMR_TEN)); + } else { + setbits16(&pinfo->sccp->scc_sccm, UART_SCCM_RX); + setbits32(&pinfo->sccp->scc_gsmrl, (SCC_GSMRL_ENR | SCC_GSMRL_ENT)); + } + + return 0; +} + +inline void cpm_uart_wait_until_send(struct uart_cpm_port *pinfo) +{ + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(pinfo->wait_closing); +} + +/* + * Shutdown the uart + */ +static void cpm_uart_shutdown(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = + container_of(port, struct uart_cpm_port, port); + + pr_debug("CPM uart[%d]:shutdown\n", port->line); + + /* free interrupt handler */ + free_irq(port->irq, port); + + /* If the port is not the console, disable Rx and Tx. */ + if (!(pinfo->flags & FLAG_CONSOLE)) { + /* Wait for all the BDs marked sent */ + while(!cpm_uart_tx_empty(port)) { + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(2); + } + + if (pinfo->wait_closing) + cpm_uart_wait_until_send(pinfo); + + /* Stop uarts */ + if (IS_SMC(pinfo)) { + smc_t __iomem *smcp = pinfo->smcp; + clrbits16(&smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN); + clrbits8(&smcp->smc_smcm, SMCM_RX | SMCM_TX); + } else { + scc_t __iomem *sccp = pinfo->sccp; + clrbits32(&sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); + clrbits16(&sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX); + } + + /* Shut them really down and reinit buffer descriptors */ + if (IS_SMC(pinfo)) { + out_be16(&pinfo->smcup->smc_brkcr, 0); + cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX); + } else { + out_be16(&pinfo->sccup->scc_brkcr, 0); + cpm_line_cr_cmd(pinfo, CPM_CR_GRA_STOP_TX); + } + + cpm_uart_initbd(pinfo); + } +} + +static void cpm_uart_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + int baud; + unsigned long flags; + u16 cval, scval, prev_mode; + int bits, sbits; + struct uart_cpm_port *pinfo = + container_of(port, struct uart_cpm_port, port); + smc_t __iomem *smcp = pinfo->smcp; + scc_t __iomem *sccp = pinfo->sccp; + int maxidl; + + pr_debug("CPM uart[%d]:set_termios\n", port->line); + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); + if (baud < HW_BUF_SPD_THRESHOLD || + (pinfo->port.state && pinfo->port.state->port.low_latency)) + pinfo->rx_fifosize = 1; + else + pinfo->rx_fifosize = RX_BUF_SIZE; + + /* MAXIDL is the timeout after which a receive buffer is closed + * when not full if no more characters are received. + * We calculate it from the baudrate so that the duration is + * always the same at standard rates: about 4ms. + */ + maxidl = baud / 2400; + if (maxidl < 1) + maxidl = 1; + if (maxidl > 0x10) + maxidl = 0x10; + + /* Character length programmed into the mode register is the + * sum of: 1 start bit, number of data bits, 0 or 1 parity bit, + * 1 or 2 stop bits, minus 1. + * The value 'bits' counts this for us. + */ + cval = 0; + scval = 0; + + /* byte size */ + switch (termios->c_cflag & CSIZE) { + case CS5: + bits = 5; + break; + case CS6: + bits = 6; + break; + case CS7: + bits = 7; + break; + case CS8: + bits = 8; + break; + /* Never happens, but GCC is too dumb to figure it out */ + default: + bits = 8; + break; + } + sbits = bits - 5; + + if (termios->c_cflag & CSTOPB) { + cval |= SMCMR_SL; /* Two stops */ + scval |= SCU_PSMR_SL; + bits++; + } + + if (termios->c_cflag & PARENB) { + cval |= SMCMR_PEN; + scval |= SCU_PSMR_PEN; + bits++; + if (!(termios->c_cflag & PARODD)) { + cval |= SMCMR_PM_EVEN; + scval |= (SCU_PSMR_REVP | SCU_PSMR_TEVP); + } + } + + /* + * Update the timeout + */ + uart_update_timeout(port, termios->c_cflag, baud); + + /* + * Set up parity check flag + */ + port->read_status_mask = (BD_SC_EMPTY | BD_SC_OV); + if (termios->c_iflag & INPCK) + port->read_status_mask |= BD_SC_FR | BD_SC_PR; + if ((termios->c_iflag & BRKINT) || (termios->c_iflag & PARMRK)) + port->read_status_mask |= BD_SC_BR; + + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= BD_SC_PR | BD_SC_FR; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= BD_SC_BR; + /* + * If we're ignore parity and break indicators, ignore + * overruns too. (For real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= BD_SC_OV; + } + /* + * !!! ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + port->read_status_mask &= ~BD_SC_EMPTY; + + spin_lock_irqsave(&port->lock, flags); + + /* Start bit has not been added (so don't, because we would just + * subtract it later), and we need to add one for the number of + * stops bits (there is always at least one). + */ + bits++; + if (IS_SMC(pinfo)) { + /* + * MRBLR can be changed while an SMC/SCC is operating only + * if it is done in a single bus cycle with one 16-bit move + * (not two 8-bit bus cycles back-to-back). This occurs when + * the cp shifts control to the next RxBD, so the change does + * not take effect immediately. To guarantee the exact RxBD + * on which the change occurs, change MRBLR only while the + * SMC/SCC receiver is disabled. + */ + out_be16(&pinfo->smcup->smc_mrblr, pinfo->rx_fifosize); + out_be16(&pinfo->smcup->smc_maxidl, maxidl); + + /* Set the mode register. We want to keep a copy of the + * enables, because we want to put them back if they were + * present. + */ + prev_mode = in_be16(&smcp->smc_smcmr) & (SMCMR_REN | SMCMR_TEN); + /* Output in *one* operation, so we don't interrupt RX/TX if they + * were already enabled. */ + out_be16(&smcp->smc_smcmr, smcr_mk_clen(bits) | cval | + SMCMR_SM_UART | prev_mode); + } else { + out_be16(&pinfo->sccup->scc_genscc.scc_mrblr, pinfo->rx_fifosize); + out_be16(&pinfo->sccup->scc_maxidl, maxidl); + out_be16(&sccp->scc_psmr, (sbits << 12) | scval); + } + + if (pinfo->clk) + clk_set_rate(pinfo->clk, baud); + else + cpm_set_brg(pinfo->brg - 1, baud); + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *cpm_uart_type(struct uart_port *port) +{ + pr_debug("CPM uart[%d]:uart_type\n", port->line); + + return port->type == PORT_CPM ? "CPM UART" : NULL; +} + +/* + * verify the new serial_struct (for TIOCSSERIAL). + */ +static int cpm_uart_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + int ret = 0; + + pr_debug("CPM uart[%d]:verify_port\n", port->line); + + if (ser->type != PORT_UNKNOWN && ser->type != PORT_CPM) + ret = -EINVAL; + if (ser->irq < 0 || ser->irq >= nr_irqs) + ret = -EINVAL; + if (ser->baud_base < 9600) + ret = -EINVAL; + return ret; +} + +/* + * Transmit characters, refill buffer descriptor, if possible + */ +static int cpm_uart_tx_pump(struct uart_port *port) +{ + cbd_t __iomem *bdp; + u8 *p; + int count; + struct uart_cpm_port *pinfo = + container_of(port, struct uart_cpm_port, port); + struct circ_buf *xmit = &port->state->xmit; + + /* Handle xon/xoff */ + if (port->x_char) { + /* Pick next descriptor and fill from buffer */ + bdp = pinfo->tx_cur; + + p = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo); + + *p++ = port->x_char; + + out_be16(&bdp->cbd_datlen, 1); + setbits16(&bdp->cbd_sc, BD_SC_READY); + /* Get next BD. */ + if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) + bdp = pinfo->tx_bd_base; + else + bdp++; + pinfo->tx_cur = bdp; + + port->icount.tx++; + port->x_char = 0; + return 1; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + cpm_uart_stop_tx(port); + return 0; + } + + /* Pick next descriptor and fill from buffer */ + bdp = pinfo->tx_cur; + + while (!(in_be16(&bdp->cbd_sc) & BD_SC_READY) && + xmit->tail != xmit->head) { + count = 0; + p = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo); + while (count < pinfo->tx_fifosize) { + *p++ = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + count++; + if (xmit->head == xmit->tail) + break; + } + out_be16(&bdp->cbd_datlen, count); + setbits16(&bdp->cbd_sc, BD_SC_READY); + /* Get next BD. */ + if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) + bdp = pinfo->tx_bd_base; + else + bdp++; + } + pinfo->tx_cur = bdp; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) { + cpm_uart_stop_tx(port); + return 0; + } + + return 1; +} + +/* + * init buffer descriptors + */ +static void cpm_uart_initbd(struct uart_cpm_port *pinfo) +{ + int i; + u8 *mem_addr; + cbd_t __iomem *bdp; + + pr_debug("CPM uart[%d]:initbd\n", pinfo->port.line); + + /* Set the physical address of the host memory + * buffers in the buffer descriptors, and the + * virtual address for us to work with. + */ + mem_addr = pinfo->mem_addr; + bdp = pinfo->rx_cur = pinfo->rx_bd_base; + for (i = 0; i < (pinfo->rx_nrfifos - 1); i++, bdp++) { + out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo)); + out_be16(&bdp->cbd_sc, BD_SC_EMPTY | BD_SC_INTRPT); + mem_addr += pinfo->rx_fifosize; + } + + out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo)); + out_be16(&bdp->cbd_sc, BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT); + + /* Set the physical address of the host memory + * buffers in the buffer descriptors, and the + * virtual address for us to work with. + */ + mem_addr = pinfo->mem_addr + L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize); + bdp = pinfo->tx_cur = pinfo->tx_bd_base; + for (i = 0; i < (pinfo->tx_nrfifos - 1); i++, bdp++) { + out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo)); + out_be16(&bdp->cbd_sc, BD_SC_INTRPT); + mem_addr += pinfo->tx_fifosize; + } + + out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo)); + out_be16(&bdp->cbd_sc, BD_SC_WRAP | BD_SC_INTRPT); +} + +static void cpm_uart_init_scc(struct uart_cpm_port *pinfo) +{ + scc_t __iomem *scp; + scc_uart_t __iomem *sup; + + pr_debug("CPM uart[%d]:init_scc\n", pinfo->port.line); + + scp = pinfo->sccp; + sup = pinfo->sccup; + + /* Store address */ + out_be16(&pinfo->sccup->scc_genscc.scc_rbase, + (u8 __iomem *)pinfo->rx_bd_base - DPRAM_BASE); + out_be16(&pinfo->sccup->scc_genscc.scc_tbase, + (u8 __iomem *)pinfo->tx_bd_base - DPRAM_BASE); + + /* Set up the uart parameters in the + * parameter ram. + */ + + cpm_set_scc_fcr(sup); + + out_be16(&sup->scc_genscc.scc_mrblr, pinfo->rx_fifosize); + out_be16(&sup->scc_maxidl, 0x10); + out_be16(&sup->scc_brkcr, 1); + out_be16(&sup->scc_parec, 0); + out_be16(&sup->scc_frmec, 0); + out_be16(&sup->scc_nosec, 0); + out_be16(&sup->scc_brkec, 0); + out_be16(&sup->scc_uaddr1, 0); + out_be16(&sup->scc_uaddr2, 0); + out_be16(&sup->scc_toseq, 0); + out_be16(&sup->scc_char1, 0x8000); + out_be16(&sup->scc_char2, 0x8000); + out_be16(&sup->scc_char3, 0x8000); + out_be16(&sup->scc_char4, 0x8000); + out_be16(&sup->scc_char5, 0x8000); + out_be16(&sup->scc_char6, 0x8000); + out_be16(&sup->scc_char7, 0x8000); + out_be16(&sup->scc_char8, 0x8000); + out_be16(&sup->scc_rccm, 0xc0ff); + + /* Send the CPM an initialize command. + */ + cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX); + + /* Set UART mode, 8 bit, no parity, one stop. + * Enable receive and transmit. + */ + out_be32(&scp->scc_gsmrh, 0); + out_be32(&scp->scc_gsmrl, + SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16); + + /* Enable rx interrupts and clear all pending events. */ + out_be16(&scp->scc_sccm, 0); + out_be16(&scp->scc_scce, 0xffff); + out_be16(&scp->scc_dsr, 0x7e7e); + out_be16(&scp->scc_psmr, 0x3000); + + setbits32(&scp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); +} + +static void cpm_uart_init_smc(struct uart_cpm_port *pinfo) +{ + smc_t __iomem *sp; + smc_uart_t __iomem *up; + + pr_debug("CPM uart[%d]:init_smc\n", pinfo->port.line); + + sp = pinfo->smcp; + up = pinfo->smcup; + + /* Store address */ + out_be16(&pinfo->smcup->smc_rbase, + (u8 __iomem *)pinfo->rx_bd_base - DPRAM_BASE); + out_be16(&pinfo->smcup->smc_tbase, + (u8 __iomem *)pinfo->tx_bd_base - DPRAM_BASE); + +/* + * In case SMC is being relocated... + */ + out_be16(&up->smc_rbptr, in_be16(&pinfo->smcup->smc_rbase)); + out_be16(&up->smc_tbptr, in_be16(&pinfo->smcup->smc_tbase)); + out_be32(&up->smc_rstate, 0); + out_be32(&up->smc_tstate, 0); + out_be16(&up->smc_brkcr, 1); /* number of break chars */ + out_be16(&up->smc_brkec, 0); + + /* Set up the uart parameters in the + * parameter ram. + */ + cpm_set_smc_fcr(up); + + /* Using idle character time requires some additional tuning. */ + out_be16(&up->smc_mrblr, pinfo->rx_fifosize); + out_be16(&up->smc_maxidl, 0x10); + out_be16(&up->smc_brklen, 0); + out_be16(&up->smc_brkec, 0); + out_be16(&up->smc_brkcr, 1); + + /* Set UART mode, 8 bit, no parity, one stop. + * Enable receive and transmit. + */ + out_be16(&sp->smc_smcmr, smcr_mk_clen(9) | SMCMR_SM_UART); + + /* Enable only rx interrupts clear all pending events. */ + out_8(&sp->smc_smcm, 0); + out_8(&sp->smc_smce, 0xff); + + setbits16(&sp->smc_smcmr, SMCMR_REN | SMCMR_TEN); +} + +/* + * Initialize port. This is called from early_console stuff + * so we have to be careful here ! + */ +static int cpm_uart_request_port(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = + container_of(port, struct uart_cpm_port, port); + int ret; + + pr_debug("CPM uart[%d]:request port\n", port->line); + + if (pinfo->flags & FLAG_CONSOLE) + return 0; + + if (IS_SMC(pinfo)) { + clrbits8(&pinfo->smcp->smc_smcm, SMCM_RX | SMCM_TX); + clrbits16(&pinfo->smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN); + } else { + clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX); + clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); + } + + ret = cpm_uart_allocbuf(pinfo, 0); + + if (ret) + return ret; + + cpm_uart_initbd(pinfo); + if (IS_SMC(pinfo)) + cpm_uart_init_smc(pinfo); + else + cpm_uart_init_scc(pinfo); + + return 0; +} + +static void cpm_uart_release_port(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = + container_of(port, struct uart_cpm_port, port); + + if (!(pinfo->flags & FLAG_CONSOLE)) + cpm_uart_freebuf(pinfo); +} + +/* + * Configure/autoconfigure the port. + */ +static void cpm_uart_config_port(struct uart_port *port, int flags) +{ + pr_debug("CPM uart[%d]:config_port\n", port->line); + + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_CPM; + cpm_uart_request_port(port); + } +} + +#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_CPM_CONSOLE) +/* + * Write a string to the serial port + * Note that this is called with interrupts already disabled + */ +static void cpm_uart_early_write(struct uart_cpm_port *pinfo, + const char *string, u_int count, bool handle_linefeed) +{ + unsigned int i; + cbd_t __iomem *bdp, *bdbase; + unsigned char *cpm_outp_addr; + + /* Get the address of the host memory buffer. + */ + bdp = pinfo->tx_cur; + bdbase = pinfo->tx_bd_base; + + /* + * Now, do each character. This is not as bad as it looks + * since this is a holding FIFO and not a transmitting FIFO. + * We could add the complexity of filling the entire transmit + * buffer, but we would just wait longer between accesses...... + */ + for (i = 0; i < count; i++, string++) { + /* Wait for transmitter fifo to empty. + * Ready indicates output is ready, and xmt is doing + * that, not that it is ready for us to send. + */ + while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) + ; + + /* Send the character out. + * If the buffer address is in the CPM DPRAM, don't + * convert it. + */ + cpm_outp_addr = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), + pinfo); + *cpm_outp_addr = *string; + + out_be16(&bdp->cbd_datlen, 1); + setbits16(&bdp->cbd_sc, BD_SC_READY); + + if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) + bdp = bdbase; + else + bdp++; + + /* if a LF, also do CR... */ + if (handle_linefeed && *string == 10) { + while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) + ; + + cpm_outp_addr = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), + pinfo); + *cpm_outp_addr = 13; + + out_be16(&bdp->cbd_datlen, 1); + setbits16(&bdp->cbd_sc, BD_SC_READY); + + if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) + bdp = bdbase; + else + bdp++; + } + } + + /* + * Finally, Wait for transmitter & holding register to empty + * and restore the IER + */ + while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) + ; + + pinfo->tx_cur = bdp; +} +#endif + +#ifdef CONFIG_CONSOLE_POLL +/* Serial polling routines for writing and reading from the uart while + * in an interrupt or debug context. + */ + +#define GDB_BUF_SIZE 512 /* power of 2, please */ + +static char poll_buf[GDB_BUF_SIZE]; +static char *pollp; +static int poll_chars; + +static int poll_wait_key(char *obuf, struct uart_cpm_port *pinfo) +{ + u_char c, *cp; + volatile cbd_t *bdp; + int i; + + /* Get the address of the host memory buffer. + */ + bdp = pinfo->rx_cur; + if (bdp->cbd_sc & BD_SC_EMPTY) + return NO_POLL_CHAR; + + /* If the buffer address is in the CPM DPRAM, don't + * convert it. + */ + cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo); + + if (obuf) { + i = c = bdp->cbd_datlen; + while (i-- > 0) + *obuf++ = *cp++; + } else + c = *cp; + bdp->cbd_sc &= ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV | BD_SC_ID); + bdp->cbd_sc |= BD_SC_EMPTY; + + if (bdp->cbd_sc & BD_SC_WRAP) + bdp = pinfo->rx_bd_base; + else + bdp++; + pinfo->rx_cur = (cbd_t *)bdp; + + return (int)c; +} + +static int cpm_get_poll_char(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = + container_of(port, struct uart_cpm_port, port); + + if (!serial_polled) { + serial_polled = 1; + poll_chars = 0; + } + if (poll_chars <= 0) { + int ret = poll_wait_key(poll_buf, pinfo); + + if (ret == NO_POLL_CHAR) + return ret; + poll_chars = ret; + pollp = poll_buf; + } + poll_chars--; + return *pollp++; +} + +static void cpm_put_poll_char(struct uart_port *port, + unsigned char c) +{ + struct uart_cpm_port *pinfo = + container_of(port, struct uart_cpm_port, port); + static char ch[2]; + + ch[0] = (char)c; + cpm_uart_early_write(pinfo, ch, 1, false); +} +#endif /* CONFIG_CONSOLE_POLL */ + +static const struct uart_ops cpm_uart_pops = { + .tx_empty = cpm_uart_tx_empty, + .set_mctrl = cpm_uart_set_mctrl, + .get_mctrl = cpm_uart_get_mctrl, + .stop_tx = cpm_uart_stop_tx, + .start_tx = cpm_uart_start_tx, + .stop_rx = cpm_uart_stop_rx, + .break_ctl = cpm_uart_break_ctl, + .startup = cpm_uart_startup, + .shutdown = cpm_uart_shutdown, + .set_termios = cpm_uart_set_termios, + .type = cpm_uart_type, + .release_port = cpm_uart_release_port, + .request_port = cpm_uart_request_port, + .config_port = cpm_uart_config_port, + .verify_port = cpm_uart_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = cpm_get_poll_char, + .poll_put_char = cpm_put_poll_char, +#endif +}; + +struct uart_cpm_port cpm_uart_ports[UART_NR]; + +static int cpm_uart_init_port(struct device_node *np, + struct uart_cpm_port *pinfo) +{ + const u32 *data; + void __iomem *mem, *pram; + struct device *dev = pinfo->port.dev; + int len; + int ret; + int i; + + data = of_get_property(np, "clock", NULL); + if (data) { + struct clk *clk = clk_get(NULL, (const char*)data); + if (!IS_ERR(clk)) + pinfo->clk = clk; + } + if (!pinfo->clk) { + data = of_get_property(np, "fsl,cpm-brg", &len); + if (!data || len != 4) { + printk(KERN_ERR "CPM UART %pOFn has no/invalid " + "fsl,cpm-brg property.\n", np); + return -EINVAL; + } + pinfo->brg = *data; + } + + data = of_get_property(np, "fsl,cpm-command", &len); + if (!data || len != 4) { + printk(KERN_ERR "CPM UART %pOFn has no/invalid " + "fsl,cpm-command property.\n", np); + return -EINVAL; + } + pinfo->command = *data; + + mem = of_iomap(np, 0); + if (!mem) + return -ENOMEM; + + if (of_device_is_compatible(np, "fsl,cpm1-scc-uart") || + of_device_is_compatible(np, "fsl,cpm2-scc-uart")) { + pinfo->sccp = mem; + pinfo->sccup = pram = cpm_uart_map_pram(pinfo, np); + } else if (of_device_is_compatible(np, "fsl,cpm1-smc-uart") || + of_device_is_compatible(np, "fsl,cpm2-smc-uart")) { + pinfo->flags |= FLAG_SMC; + pinfo->smcp = mem; + pinfo->smcup = pram = cpm_uart_map_pram(pinfo, np); + } else { + ret = -ENODEV; + goto out_mem; + } + + if (!pram) { + ret = -ENOMEM; + goto out_mem; + } + + pinfo->tx_nrfifos = TX_NUM_FIFO; + pinfo->tx_fifosize = TX_BUF_SIZE; + pinfo->rx_nrfifos = RX_NUM_FIFO; + pinfo->rx_fifosize = RX_BUF_SIZE; + + pinfo->port.uartclk = ppc_proc_freq; + pinfo->port.mapbase = (unsigned long)mem; + pinfo->port.type = PORT_CPM; + pinfo->port.ops = &cpm_uart_pops; + pinfo->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_CPM_CONSOLE); + pinfo->port.iotype = UPIO_MEM; + pinfo->port.fifosize = pinfo->tx_nrfifos * pinfo->tx_fifosize; + spin_lock_init(&pinfo->port.lock); + + pinfo->port.irq = irq_of_parse_and_map(np, 0); + if (pinfo->port.irq == NO_IRQ) { + ret = -EINVAL; + goto out_pram; + } + + for (i = 0; i < NUM_GPIOS; i++) { + struct gpio_desc *gpiod; + + pinfo->gpios[i] = NULL; + + gpiod = devm_gpiod_get_index_optional(dev, NULL, i, GPIOD_ASIS); + + if (IS_ERR(gpiod)) { + ret = PTR_ERR(gpiod); + goto out_irq; + } + + if (gpiod) { + if (i == GPIO_RTS || i == GPIO_DTR) + ret = gpiod_direction_output(gpiod, 0); + else + ret = gpiod_direction_input(gpiod); + if (ret) { + pr_err("can't set direction for gpio #%d: %d\n", + i, ret); + continue; + } + pinfo->gpios[i] = gpiod; + } + } + +#ifdef CONFIG_PPC_EARLY_DEBUG_CPM + udbg_putc = NULL; +#endif + + return cpm_uart_request_port(&pinfo->port); + +out_irq: + irq_dispose_mapping(pinfo->port.irq); +out_pram: + cpm_uart_unmap_pram(pinfo, pram); +out_mem: + iounmap(mem); + return ret; +} + +#ifdef CONFIG_SERIAL_CPM_CONSOLE +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * Note that this is called with interrupts already disabled + */ +static void cpm_uart_console_write(struct console *co, const char *s, + u_int count) +{ + struct uart_cpm_port *pinfo = &cpm_uart_ports[co->index]; + unsigned long flags; + + if (unlikely(oops_in_progress)) { + local_irq_save(flags); + cpm_uart_early_write(pinfo, s, count, true); + local_irq_restore(flags); + } else { + spin_lock_irqsave(&pinfo->port.lock, flags); + cpm_uart_early_write(pinfo, s, count, true); + spin_unlock_irqrestore(&pinfo->port.lock, flags); + } +} + + +static int __init cpm_uart_console_setup(struct console *co, char *options) +{ + int baud = 38400; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + int ret; + struct uart_cpm_port *pinfo; + struct uart_port *port; + + struct device_node *np; + int i = 0; + + if (co->index >= UART_NR) { + printk(KERN_ERR "cpm_uart: console index %d too high\n", + co->index); + return -ENODEV; + } + + for_each_node_by_type(np, "serial") { + if (!of_device_is_compatible(np, "fsl,cpm1-smc-uart") && + !of_device_is_compatible(np, "fsl,cpm1-scc-uart") && + !of_device_is_compatible(np, "fsl,cpm2-smc-uart") && + !of_device_is_compatible(np, "fsl,cpm2-scc-uart")) + continue; + + if (i++ == co->index) + break; + } + + if (!np) + return -ENODEV; + + pinfo = &cpm_uart_ports[co->index]; + + pinfo->flags |= FLAG_CONSOLE; + port = &pinfo->port; + + ret = cpm_uart_init_port(np, pinfo); + of_node_put(np); + if (ret) + return ret; + + if (options) { + uart_parse_options(options, &baud, &parity, &bits, &flow); + } else { + if ((baud = uart_baudrate()) == -1) + baud = 9600; + } + + if (IS_SMC(pinfo)) { + out_be16(&pinfo->smcup->smc_brkcr, 0); + cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX); + clrbits8(&pinfo->smcp->smc_smcm, SMCM_RX | SMCM_TX); + clrbits16(&pinfo->smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN); + } else { + out_be16(&pinfo->sccup->scc_brkcr, 0); + cpm_line_cr_cmd(pinfo, CPM_CR_GRA_STOP_TX); + clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX); + clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); + } + + ret = cpm_uart_allocbuf(pinfo, 1); + + if (ret) + return ret; + + cpm_uart_initbd(pinfo); + + if (IS_SMC(pinfo)) + cpm_uart_init_smc(pinfo); + else + cpm_uart_init_scc(pinfo); + + uart_set_options(port, co, baud, parity, bits, flow); + cpm_line_cr_cmd(pinfo, CPM_CR_RESTART_TX); + + return 0; +} + +static struct uart_driver cpm_reg; +static struct console cpm_scc_uart_console = { + .name = "ttyCPM", + .write = cpm_uart_console_write, + .device = uart_console_device, + .setup = cpm_uart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &cpm_reg, +}; + +static int __init cpm_uart_console_init(void) +{ + cpm_muram_init(); + register_console(&cpm_scc_uart_console); + return 0; +} + +console_initcall(cpm_uart_console_init); + +#define CPM_UART_CONSOLE &cpm_scc_uart_console +#else +#define CPM_UART_CONSOLE NULL +#endif + +static struct uart_driver cpm_reg = { + .owner = THIS_MODULE, + .driver_name = "ttyCPM", + .dev_name = "ttyCPM", + .major = SERIAL_CPM_MAJOR, + .minor = SERIAL_CPM_MINOR, + .cons = CPM_UART_CONSOLE, + .nr = UART_NR, +}; + +static int probe_index; + +static int cpm_uart_probe(struct platform_device *ofdev) +{ + int index = probe_index++; + struct uart_cpm_port *pinfo = &cpm_uart_ports[index]; + int ret; + + pinfo->port.line = index; + + if (index >= UART_NR) + return -ENODEV; + + platform_set_drvdata(ofdev, pinfo); + + /* initialize the device pointer for the port */ + pinfo->port.dev = &ofdev->dev; + + ret = cpm_uart_init_port(ofdev->dev.of_node, pinfo); + if (ret) + return ret; + + return uart_add_one_port(&cpm_reg, &pinfo->port); +} + +static int cpm_uart_remove(struct platform_device *ofdev) +{ + struct uart_cpm_port *pinfo = platform_get_drvdata(ofdev); + return uart_remove_one_port(&cpm_reg, &pinfo->port); +} + +static const struct of_device_id cpm_uart_match[] = { + { + .compatible = "fsl,cpm1-smc-uart", + }, + { + .compatible = "fsl,cpm1-scc-uart", + }, + { + .compatible = "fsl,cpm2-smc-uart", + }, + { + .compatible = "fsl,cpm2-scc-uart", + }, + {} +}; +MODULE_DEVICE_TABLE(of, cpm_uart_match); + +static struct platform_driver cpm_uart_driver = { + .driver = { + .name = "cpm_uart", + .of_match_table = cpm_uart_match, + }, + .probe = cpm_uart_probe, + .remove = cpm_uart_remove, + }; + +static int __init cpm_uart_init(void) +{ + int ret = uart_register_driver(&cpm_reg); + if (ret) + return ret; + + ret = platform_driver_register(&cpm_uart_driver); + if (ret) + uart_unregister_driver(&cpm_reg); + + return ret; +} + +static void __exit cpm_uart_exit(void) +{ + platform_driver_unregister(&cpm_uart_driver); + uart_unregister_driver(&cpm_reg); +} + +module_init(cpm_uart_init); +module_exit(cpm_uart_exit); + +MODULE_AUTHOR("Kumar Gala/Antoniou Pantelis"); +MODULE_DESCRIPTION("CPM SCC/SMC port driver $Revision: 0.01 $"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_CHARDEV(SERIAL_CPM_MAJOR, SERIAL_CPM_MINOR); diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c new file mode 100644 index 000000000..56fc52701 --- /dev/null +++ b/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c @@ -0,0 +1,122 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver for CPM (SCC/SMC) serial ports; CPM1 definitions + * + * Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2) + * Pantelis Antoniou (panto@intracom.gr) (CPM1) + * + * Copyright (C) 2004 Freescale Semiconductor, Inc. + * (C) 2004 Intracom, S.A. + * (C) 2006 MontaVista Software, Inc. + * Vitaly Bordug + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include + +#include +#include + +#include "cpm_uart.h" + +/**************************************************************/ + +void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd) +{ + cpm_command(port->command, cmd); +} + +void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port, + struct device_node *np) +{ + return of_iomap(np, 1); +} + +void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram) +{ + iounmap(pram); +} + +/* + * Allocate DP-Ram and memory buffers. We need to allocate a transmit and + * receive buffer descriptors from dual port ram, and a character + * buffer area from host mem. If we are allocating for the console we need + * to do it from bootmem + */ +int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con) +{ + int dpmemsz, memsz; + u8 *dp_mem; + unsigned long dp_offset; + u8 *mem_addr; + dma_addr_t dma_addr = 0; + + pr_debug("CPM uart[%d]:allocbuf\n", pinfo->port.line); + + dpmemsz = sizeof(cbd_t) * (pinfo->rx_nrfifos + pinfo->tx_nrfifos); + dp_offset = cpm_dpalloc(dpmemsz, 8); + if (IS_ERR_VALUE(dp_offset)) { + printk(KERN_ERR + "cpm_uart_cpm1.c: could not allocate buffer descriptors\n"); + return -ENOMEM; + } + dp_mem = cpm_dpram_addr(dp_offset); + + memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) + + L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize); + if (is_con) { + /* was hostalloc but changed cause it blows away the */ + /* large tlb mapping when pinning the kernel area */ + mem_addr = (u8 *) cpm_dpram_addr(cpm_dpalloc(memsz, 8)); + dma_addr = (u32)cpm_dpram_phys(mem_addr); + } else + mem_addr = dma_alloc_coherent(pinfo->port.dev, memsz, &dma_addr, + GFP_KERNEL); + + if (mem_addr == NULL) { + cpm_dpfree(dp_offset); + printk(KERN_ERR + "cpm_uart_cpm1.c: could not allocate coherent memory\n"); + return -ENOMEM; + } + + pinfo->dp_addr = dp_offset; + pinfo->mem_addr = mem_addr; /* virtual address*/ + pinfo->dma_addr = dma_addr; /* physical address*/ + pinfo->mem_size = memsz; + + pinfo->rx_buf = mem_addr; + pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos + * pinfo->rx_fifosize); + + pinfo->rx_bd_base = (cbd_t __iomem __force *)dp_mem; + pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos; + + return 0; +} + +void cpm_uart_freebuf(struct uart_cpm_port *pinfo) +{ + dma_free_coherent(pinfo->port.dev, L1_CACHE_ALIGN(pinfo->rx_nrfifos * + pinfo->rx_fifosize) + + L1_CACHE_ALIGN(pinfo->tx_nrfifos * + pinfo->tx_fifosize), pinfo->mem_addr, + pinfo->dma_addr); + + cpm_dpfree(pinfo->dp_addr); +} diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h b/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h new file mode 100644 index 000000000..18ec08499 --- /dev/null +++ b/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Driver for CPM (SCC/SMC) serial ports + * + * definitions for cpm1 + * + */ + +#ifndef CPM_UART_CPM1_H +#define CPM_UART_CPM1_H + +#include + +static inline void cpm_set_brg(int brg, int baud) +{ + cpm_setbrg(brg, baud); +} + +static inline void cpm_set_scc_fcr(scc_uart_t __iomem * sup) +{ + out_8(&sup->scc_genscc.scc_rfcr, SMC_EB); + out_8(&sup->scc_genscc.scc_tfcr, SMC_EB); +} + +static inline void cpm_set_smc_fcr(smc_uart_t __iomem * up) +{ + out_8(&up->smc_rfcr, SMC_EB); + out_8(&up->smc_tfcr, SMC_EB); +} + +#define DPRAM_BASE ((u8 __iomem __force *)cpm_dpram_addr(0)) + +#endif diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c new file mode 100644 index 000000000..6a1cd03bf --- /dev/null +++ b/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c @@ -0,0 +1,157 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver for CPM (SCC/SMC) serial ports; CPM2 definitions + * + * Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2) + * Pantelis Antoniou (panto@intracom.gr) (CPM1) + * + * Copyright (C) 2004 Freescale Semiconductor, Inc. + * (C) 2004 Intracom, S.A. + * (C) 2006 MontaVista Software, Inc. + * Vitaly Bordug + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include + +#include "cpm_uart.h" + +/**************************************************************/ + +void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd) +{ + cpm_command(port->command, cmd); +} + +void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port, + struct device_node *np) +{ + void __iomem *pram; + unsigned long offset; + struct resource res; + resource_size_t len; + + /* Don't remap parameter RAM if it has already been initialized + * during console setup. + */ + if (IS_SMC(port) && port->smcup) + return port->smcup; + else if (!IS_SMC(port) && port->sccup) + return port->sccup; + + if (of_address_to_resource(np, 1, &res)) + return NULL; + + len = resource_size(&res); + pram = ioremap(res.start, len); + if (!pram) + return NULL; + + if (!IS_SMC(port)) + return pram; + + if (len != 2) { + printk(KERN_WARNING "cpm_uart[%d]: device tree references " + "SMC pram, using boot loader/wrapper pram mapping. " + "Please fix your device tree to reference the pram " + "base register instead.\n", + port->port.line); + return pram; + } + + offset = cpm_dpalloc(PROFF_SMC_SIZE, 64); + out_be16(pram, offset); + iounmap(pram); + return cpm_muram_addr(offset); +} + +void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram) +{ + if (!IS_SMC(port)) + iounmap(pram); +} + +/* + * Allocate DP-Ram and memory buffers. We need to allocate a transmit and + * receive buffer descriptors from dual port ram, and a character + * buffer area from host mem. If we are allocating for the console we need + * to do it from bootmem + */ +int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con) +{ + int dpmemsz, memsz; + u8 __iomem *dp_mem; + unsigned long dp_offset; + u8 *mem_addr; + dma_addr_t dma_addr = 0; + + pr_debug("CPM uart[%d]:allocbuf\n", pinfo->port.line); + + dpmemsz = sizeof(cbd_t) * (pinfo->rx_nrfifos + pinfo->tx_nrfifos); + dp_offset = cpm_dpalloc(dpmemsz, 8); + if (IS_ERR_VALUE(dp_offset)) { + printk(KERN_ERR + "cpm_uart_cpm.c: could not allocate buffer descriptors\n"); + return -ENOMEM; + } + + dp_mem = cpm_dpram_addr(dp_offset); + + memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) + + L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize); + if (is_con) { + mem_addr = kzalloc(memsz, GFP_NOWAIT); + dma_addr = virt_to_bus(mem_addr); + } + else + mem_addr = dma_alloc_coherent(pinfo->port.dev, memsz, &dma_addr, + GFP_KERNEL); + + if (mem_addr == NULL) { + cpm_dpfree(dp_offset); + printk(KERN_ERR + "cpm_uart_cpm.c: could not allocate coherent memory\n"); + return -ENOMEM; + } + + pinfo->dp_addr = dp_offset; + pinfo->mem_addr = mem_addr; + pinfo->dma_addr = dma_addr; + pinfo->mem_size = memsz; + + pinfo->rx_buf = mem_addr; + pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos + * pinfo->rx_fifosize); + + pinfo->rx_bd_base = (cbd_t __iomem *)dp_mem; + pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos; + + return 0; +} + +void cpm_uart_freebuf(struct uart_cpm_port *pinfo) +{ + dma_free_coherent(pinfo->port.dev, L1_CACHE_ALIGN(pinfo->rx_nrfifos * + pinfo->rx_fifosize) + + L1_CACHE_ALIGN(pinfo->tx_nrfifos * + pinfo->tx_fifosize), (void __force *)pinfo->mem_addr, + pinfo->dma_addr); + + cpm_dpfree(pinfo->dp_addr); +} diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.h b/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.h new file mode 100644 index 000000000..051a8509c --- /dev/null +++ b/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.h @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Driver for CPM (SCC/SMC) serial ports + * + * definitions for cpm2 + * + */ + +#ifndef CPM_UART_CPM2_H +#define CPM_UART_CPM2_H + +#include + +static inline void cpm_set_brg(int brg, int baud) +{ + cpm_setbrg(brg, baud); +} + +static inline void cpm_set_scc_fcr(scc_uart_t __iomem *sup) +{ + out_8(&sup->scc_genscc.scc_rfcr, CPMFCR_GBL | CPMFCR_EB); + out_8(&sup->scc_genscc.scc_tfcr, CPMFCR_GBL | CPMFCR_EB); +} + +static inline void cpm_set_smc_fcr(smc_uart_t __iomem *up) +{ + out_8(&up->smc_rfcr, CPMFCR_GBL | CPMFCR_EB); + out_8(&up->smc_tfcr, CPMFCR_GBL | CPMFCR_EB); +} + +#define DPRAM_BASE ((u8 __iomem __force *)cpm_dpram_addr(0)) + +#endif diff --git a/drivers/tty/serial/digicolor-usart.c b/drivers/tty/serial/digicolor-usart.c new file mode 100644 index 000000000..5fea9bf86 --- /dev/null +++ b/drivers/tty/serial/digicolor-usart.c @@ -0,0 +1,562 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver for Conexant Digicolor serial ports (USART) + * + * Author: Baruch Siach + * + * Copyright (C) 2014 Paradox Innovation Ltd. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define UA_ENABLE 0x00 +#define UA_ENABLE_ENABLE BIT(0) + +#define UA_CONTROL 0x01 +#define UA_CONTROL_RX_ENABLE BIT(0) +#define UA_CONTROL_TX_ENABLE BIT(1) +#define UA_CONTROL_SOFT_RESET BIT(2) + +#define UA_STATUS 0x02 +#define UA_STATUS_PARITY_ERR BIT(0) +#define UA_STATUS_FRAME_ERR BIT(1) +#define UA_STATUS_OVERRUN_ERR BIT(2) +#define UA_STATUS_TX_READY BIT(6) + +#define UA_CONFIG 0x03 +#define UA_CONFIG_CHAR_LEN BIT(0) +#define UA_CONFIG_STOP_BITS BIT(1) +#define UA_CONFIG_PARITY BIT(2) +#define UA_CONFIG_ODD_PARITY BIT(4) + +#define UA_EMI_REC 0x04 + +#define UA_HBAUD_LO 0x08 +#define UA_HBAUD_HI 0x09 + +#define UA_STATUS_FIFO 0x0a +#define UA_STATUS_FIFO_RX_EMPTY BIT(2) +#define UA_STATUS_FIFO_RX_INT_ALMOST BIT(3) +#define UA_STATUS_FIFO_TX_FULL BIT(4) +#define UA_STATUS_FIFO_TX_INT_ALMOST BIT(7) + +#define UA_CONFIG_FIFO 0x0b +#define UA_CONFIG_FIFO_RX_THRESH 7 +#define UA_CONFIG_FIFO_RX_FIFO_MODE BIT(3) +#define UA_CONFIG_FIFO_TX_FIFO_MODE BIT(7) + +#define UA_INTFLAG_CLEAR 0x1c +#define UA_INTFLAG_SET 0x1d +#define UA_INT_ENABLE 0x1e +#define UA_INT_STATUS 0x1f + +#define UA_INT_TX BIT(0) +#define UA_INT_RX BIT(1) + +#define DIGICOLOR_USART_NR 3 + +/* + * We use the 16 bytes hardware FIFO to buffer Rx traffic. Rx interrupt is + * only produced when the FIFO is filled more than a certain configurable + * threshold. Unfortunately, there is no way to set this threshold below half + * FIFO. This means that we must periodically poll the FIFO status register to + * see whether there are waiting Rx bytes. + */ + +struct digicolor_port { + struct uart_port port; + struct delayed_work rx_poll_work; +}; + +static struct uart_port *digicolor_ports[DIGICOLOR_USART_NR]; + +static bool digicolor_uart_tx_full(struct uart_port *port) +{ + return !!(readb_relaxed(port->membase + UA_STATUS_FIFO) & + UA_STATUS_FIFO_TX_FULL); +} + +static bool digicolor_uart_rx_empty(struct uart_port *port) +{ + return !!(readb_relaxed(port->membase + UA_STATUS_FIFO) & + UA_STATUS_FIFO_RX_EMPTY); +} + +static void digicolor_uart_stop_tx(struct uart_port *port) +{ + u8 int_enable = readb_relaxed(port->membase + UA_INT_ENABLE); + + int_enable &= ~UA_INT_TX; + writeb_relaxed(int_enable, port->membase + UA_INT_ENABLE); +} + +static void digicolor_uart_start_tx(struct uart_port *port) +{ + u8 int_enable = readb_relaxed(port->membase + UA_INT_ENABLE); + + int_enable |= UA_INT_TX; + writeb_relaxed(int_enable, port->membase + UA_INT_ENABLE); +} + +static void digicolor_uart_stop_rx(struct uart_port *port) +{ + u8 int_enable = readb_relaxed(port->membase + UA_INT_ENABLE); + + int_enable &= ~UA_INT_RX; + writeb_relaxed(int_enable, port->membase + UA_INT_ENABLE); +} + +static void digicolor_rx_poll(struct work_struct *work) +{ + struct digicolor_port *dp = + container_of(to_delayed_work(work), + struct digicolor_port, rx_poll_work); + + if (!digicolor_uart_rx_empty(&dp->port)) + /* force RX interrupt */ + writeb_relaxed(UA_INT_RX, dp->port.membase + UA_INTFLAG_SET); + + schedule_delayed_work(&dp->rx_poll_work, msecs_to_jiffies(100)); +} + +static void digicolor_uart_rx(struct uart_port *port) +{ + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + while (1) { + u8 status, ch; + unsigned int ch_flag; + + if (digicolor_uart_rx_empty(port)) + break; + + ch = readb_relaxed(port->membase + UA_EMI_REC); + status = readb_relaxed(port->membase + UA_STATUS); + + port->icount.rx++; + ch_flag = TTY_NORMAL; + + if (status) { + if (status & UA_STATUS_PARITY_ERR) + port->icount.parity++; + else if (status & UA_STATUS_FRAME_ERR) + port->icount.frame++; + else if (status & UA_STATUS_OVERRUN_ERR) + port->icount.overrun++; + + status &= port->read_status_mask; + + if (status & UA_STATUS_PARITY_ERR) + ch_flag = TTY_PARITY; + else if (status & UA_STATUS_FRAME_ERR) + ch_flag = TTY_FRAME; + else if (status & UA_STATUS_OVERRUN_ERR) + ch_flag = TTY_OVERRUN; + } + + if (status & port->ignore_status_mask) + continue; + + uart_insert_char(port, status, UA_STATUS_OVERRUN_ERR, ch, + ch_flag); + } + + spin_unlock_irqrestore(&port->lock, flags); + + tty_flip_buffer_push(&port->state->port); +} + +static void digicolor_uart_tx(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + unsigned long flags; + + if (digicolor_uart_tx_full(port)) + return; + + spin_lock_irqsave(&port->lock, flags); + + if (port->x_char) { + writeb_relaxed(port->x_char, port->membase + UA_EMI_REC); + port->icount.tx++; + port->x_char = 0; + goto out; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + digicolor_uart_stop_tx(port); + goto out; + } + + while (!uart_circ_empty(xmit)) { + writeb(xmit->buf[xmit->tail], port->membase + UA_EMI_REC); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + + if (digicolor_uart_tx_full(port)) + break; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + +out: + spin_unlock_irqrestore(&port->lock, flags); +} + +static irqreturn_t digicolor_uart_int(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + u8 int_status = readb_relaxed(port->membase + UA_INT_STATUS); + + writeb_relaxed(UA_INT_RX | UA_INT_TX, + port->membase + UA_INTFLAG_CLEAR); + + if (int_status & UA_INT_RX) + digicolor_uart_rx(port); + if (int_status & UA_INT_TX) + digicolor_uart_tx(port); + + return IRQ_HANDLED; +} + +static unsigned int digicolor_uart_tx_empty(struct uart_port *port) +{ + u8 status = readb_relaxed(port->membase + UA_STATUS); + + return (status & UA_STATUS_TX_READY) ? TIOCSER_TEMT : 0; +} + +static unsigned int digicolor_uart_get_mctrl(struct uart_port *port) +{ + return TIOCM_CTS; +} + +static void digicolor_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} + +static void digicolor_uart_break_ctl(struct uart_port *port, int state) +{ +} + +static int digicolor_uart_startup(struct uart_port *port) +{ + struct digicolor_port *dp = + container_of(port, struct digicolor_port, port); + + writeb_relaxed(UA_ENABLE_ENABLE, port->membase + UA_ENABLE); + writeb_relaxed(UA_CONTROL_SOFT_RESET, port->membase + UA_CONTROL); + writeb_relaxed(0, port->membase + UA_CONTROL); + + writeb_relaxed(UA_CONFIG_FIFO_RX_FIFO_MODE + | UA_CONFIG_FIFO_TX_FIFO_MODE | UA_CONFIG_FIFO_RX_THRESH, + port->membase + UA_CONFIG_FIFO); + writeb_relaxed(UA_STATUS_FIFO_RX_INT_ALMOST, + port->membase + UA_STATUS_FIFO); + writeb_relaxed(UA_CONTROL_RX_ENABLE | UA_CONTROL_TX_ENABLE, + port->membase + UA_CONTROL); + writeb_relaxed(UA_INT_TX | UA_INT_RX, + port->membase + UA_INT_ENABLE); + + schedule_delayed_work(&dp->rx_poll_work, msecs_to_jiffies(100)); + + return 0; +} + +static void digicolor_uart_shutdown(struct uart_port *port) +{ + struct digicolor_port *dp = + container_of(port, struct digicolor_port, port); + + writeb_relaxed(0, port->membase + UA_ENABLE); + cancel_delayed_work_sync(&dp->rx_poll_work); +} + +static void digicolor_uart_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + unsigned int baud, divisor; + u8 config = 0; + unsigned long flags; + + /* Mask termios capabilities we don't support */ + termios->c_cflag &= ~CMSPAR; + termios->c_iflag &= ~(BRKINT | IGNBRK); + + /* Limit baud rates so that we don't need the fractional divider */ + baud = uart_get_baud_rate(port, termios, old, + port->uartclk / (0x10000*16), + port->uartclk / 256); + divisor = uart_get_divisor(port, baud) - 1; + + switch (termios->c_cflag & CSIZE) { + case CS7: + break; + case CS8: + default: + config |= UA_CONFIG_CHAR_LEN; + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= CS8; + break; + } + + if (termios->c_cflag & CSTOPB) + config |= UA_CONFIG_STOP_BITS; + + if (termios->c_cflag & PARENB) { + config |= UA_CONFIG_PARITY; + if (termios->c_cflag & PARODD) + config |= UA_CONFIG_ODD_PARITY; + } + + /* Set read status mask */ + port->read_status_mask = UA_STATUS_OVERRUN_ERR; + if (termios->c_iflag & INPCK) + port->read_status_mask |= UA_STATUS_PARITY_ERR + | UA_STATUS_FRAME_ERR; + + /* Set status ignore mask */ + port->ignore_status_mask = 0; + if (!(termios->c_cflag & CREAD)) + port->ignore_status_mask |= UA_STATUS_OVERRUN_ERR + | UA_STATUS_PARITY_ERR | UA_STATUS_FRAME_ERR; + + spin_lock_irqsave(&port->lock, flags); + + uart_update_timeout(port, termios->c_cflag, baud); + + writeb_relaxed(config, port->membase + UA_CONFIG); + writeb_relaxed(divisor & 0xff, port->membase + UA_HBAUD_LO); + writeb_relaxed(divisor >> 8, port->membase + UA_HBAUD_HI); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *digicolor_uart_type(struct uart_port *port) +{ + return (port->type == PORT_DIGICOLOR) ? "DIGICOLOR USART" : NULL; +} + +static void digicolor_uart_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) + port->type = PORT_DIGICOLOR; +} + +static void digicolor_uart_release_port(struct uart_port *port) +{ +} + +static int digicolor_uart_request_port(struct uart_port *port) +{ + return 0; +} + +static const struct uart_ops digicolor_uart_ops = { + .tx_empty = digicolor_uart_tx_empty, + .set_mctrl = digicolor_uart_set_mctrl, + .get_mctrl = digicolor_uart_get_mctrl, + .stop_tx = digicolor_uart_stop_tx, + .start_tx = digicolor_uart_start_tx, + .stop_rx = digicolor_uart_stop_rx, + .break_ctl = digicolor_uart_break_ctl, + .startup = digicolor_uart_startup, + .shutdown = digicolor_uart_shutdown, + .set_termios = digicolor_uart_set_termios, + .type = digicolor_uart_type, + .config_port = digicolor_uart_config_port, + .release_port = digicolor_uart_release_port, + .request_port = digicolor_uart_request_port, +}; + +static void digicolor_uart_console_putchar(struct uart_port *port, int ch) +{ + while (digicolor_uart_tx_full(port)) + cpu_relax(); + + writeb_relaxed(ch, port->membase + UA_EMI_REC); +} + +static void digicolor_uart_console_write(struct console *co, const char *c, + unsigned n) +{ + struct uart_port *port = digicolor_ports[co->index]; + u8 status; + unsigned long flags; + int locked = 1; + + if (oops_in_progress) + locked = spin_trylock_irqsave(&port->lock, flags); + else + spin_lock_irqsave(&port->lock, flags); + + uart_console_write(port, c, n, digicolor_uart_console_putchar); + + if (locked) + spin_unlock_irqrestore(&port->lock, flags); + + /* Wait for transmitter to become empty */ + do { + status = readb_relaxed(port->membase + UA_STATUS); + } while ((status & UA_STATUS_TX_READY) == 0); +} + +static int digicolor_uart_console_setup(struct console *co, char *options) +{ + int baud = 115200, bits = 8, parity = 'n', flow = 'n'; + struct uart_port *port; + + if (co->index < 0 || co->index >= DIGICOLOR_USART_NR) + return -EINVAL; + + port = digicolor_ports[co->index]; + if (!port) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct console digicolor_console = { + .name = "ttyS", + .device = uart_console_device, + .write = digicolor_uart_console_write, + .setup = digicolor_uart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + +static struct uart_driver digicolor_uart = { + .driver_name = "digicolor-usart", + .dev_name = "ttyS", + .nr = DIGICOLOR_USART_NR, +}; + +static int digicolor_uart_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + int irq, ret, index; + struct digicolor_port *dp; + struct resource *res; + struct clk *uart_clk; + + if (!np) { + dev_err(&pdev->dev, "Missing device tree node\n"); + return -ENXIO; + } + + index = of_alias_get_id(np, "serial"); + if (index < 0 || index >= DIGICOLOR_USART_NR) + return -EINVAL; + + dp = devm_kzalloc(&pdev->dev, sizeof(*dp), GFP_KERNEL); + if (!dp) + return -ENOMEM; + + uart_clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(uart_clk)) + return PTR_ERR(uart_clk); + + dp->port.membase = devm_platform_get_and_ioremap_resource(pdev, 0, &res); + if (IS_ERR(dp->port.membase)) + return PTR_ERR(dp->port.membase); + dp->port.mapbase = res->start; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + dp->port.irq = irq; + + dp->port.iotype = UPIO_MEM; + dp->port.uartclk = clk_get_rate(uart_clk); + dp->port.fifosize = 16; + dp->port.dev = &pdev->dev; + dp->port.ops = &digicolor_uart_ops; + dp->port.line = index; + dp->port.type = PORT_DIGICOLOR; + spin_lock_init(&dp->port.lock); + + digicolor_ports[index] = &dp->port; + platform_set_drvdata(pdev, &dp->port); + + INIT_DELAYED_WORK(&dp->rx_poll_work, digicolor_rx_poll); + + ret = devm_request_irq(&pdev->dev, dp->port.irq, digicolor_uart_int, 0, + dev_name(&pdev->dev), &dp->port); + if (ret) + return ret; + + return uart_add_one_port(&digicolor_uart, &dp->port); +} + +static int digicolor_uart_remove(struct platform_device *pdev) +{ + struct uart_port *port = platform_get_drvdata(pdev); + + uart_remove_one_port(&digicolor_uart, port); + + return 0; +} + +static const struct of_device_id digicolor_uart_dt_ids[] = { + { .compatible = "cnxt,cx92755-usart", }, + { } +}; +MODULE_DEVICE_TABLE(of, digicolor_uart_dt_ids); + +static struct platform_driver digicolor_uart_platform = { + .driver = { + .name = "digicolor-usart", + .of_match_table = of_match_ptr(digicolor_uart_dt_ids), + }, + .probe = digicolor_uart_probe, + .remove = digicolor_uart_remove, +}; + +static int __init digicolor_uart_init(void) +{ + int ret; + + if (IS_ENABLED(CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE)) { + digicolor_uart.cons = &digicolor_console; + digicolor_console.data = &digicolor_uart; + } + + ret = uart_register_driver(&digicolor_uart); + if (ret) + return ret; + + ret = platform_driver_register(&digicolor_uart_platform); + if (ret) + uart_unregister_driver(&digicolor_uart); + + return ret; +} +module_init(digicolor_uart_init); + +static void __exit digicolor_uart_exit(void) +{ + platform_driver_unregister(&digicolor_uart_platform); + uart_unregister_driver(&digicolor_uart); +} +module_exit(digicolor_uart_exit); + +MODULE_AUTHOR("Baruch Siach "); +MODULE_DESCRIPTION("Conexant Digicolor USART serial driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/dz.c b/drivers/tty/serial/dz.c new file mode 100644 index 000000000..4552742c3 --- /dev/null +++ b/drivers/tty/serial/dz.c @@ -0,0 +1,945 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dz.c: Serial port driver for DECstations equipped + * with the DZ chipset. + * + * Copyright (C) 1998 Olivier A. D. Lebaillif + * + * Email: olivier.lebaillif@ifrsys.com + * + * Copyright (C) 2004, 2006, 2007 Maciej W. Rozycki + * + * [31-AUG-98] triemer + * Changed IRQ to use Harald's dec internals interrupts.h + * removed base_addr code - moving address assignment to setup.c + * Changed name of dz_init to rs_init to be consistent with tc code + * [13-NOV-98] triemer fixed code to receive characters + * after patches by harald to irq code. + * [09-JAN-99] triemer minor fix for schedule - due to removal of timeout + * field from "current" - somewhere between 2.1.121 and 2.1.131 + Qua Jun 27 15:02:26 BRT 2001 + * [27-JUN-2001] Arnaldo Carvalho de Melo - cleanups + * + * Parts (C) 1999 David Airlie, airlied@linux.ie + * [07-SEP-99] Bugfixes + * + * [06-Jan-2002] Russell King + * Converted to new serial core + */ + +#undef DEBUG_DZ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "dz.h" + + +MODULE_DESCRIPTION("DECstation DZ serial driver"); +MODULE_LICENSE("GPL"); + + +static char dz_name[] __initdata = "DECstation DZ serial driver version "; +static char dz_version[] __initdata = "1.04"; + +struct dz_port { + struct dz_mux *mux; + struct uart_port port; + unsigned int cflag; +}; + +struct dz_mux { + struct dz_port dport[DZ_NB_PORT]; + atomic_t map_guard; + atomic_t irq_guard; + int initialised; +}; + +static struct dz_mux dz_mux; + +static inline struct dz_port *to_dport(struct uart_port *uport) +{ + return container_of(uport, struct dz_port, port); +} + +/* + * ------------------------------------------------------------ + * dz_in () and dz_out () + * + * These routines are used to access the registers of the DZ + * chip, hiding relocation differences between implementation. + * ------------------------------------------------------------ + */ + +static u16 dz_in(struct dz_port *dport, unsigned offset) +{ + void __iomem *addr = dport->port.membase + offset; + + return readw(addr); +} + +static void dz_out(struct dz_port *dport, unsigned offset, u16 value) +{ + void __iomem *addr = dport->port.membase + offset; + + writew(value, addr); +} + +/* + * ------------------------------------------------------------ + * rs_stop () and rs_start () + * + * These routines are called before setting or resetting + * tty->stopped. They enable or disable transmitter interrupts, + * as necessary. + * ------------------------------------------------------------ + */ + +static void dz_stop_tx(struct uart_port *uport) +{ + struct dz_port *dport = to_dport(uport); + u16 tmp, mask = 1 << dport->port.line; + + tmp = dz_in(dport, DZ_TCR); /* read the TX flag */ + tmp &= ~mask; /* clear the TX flag */ + dz_out(dport, DZ_TCR, tmp); +} + +static void dz_start_tx(struct uart_port *uport) +{ + struct dz_port *dport = to_dport(uport); + u16 tmp, mask = 1 << dport->port.line; + + tmp = dz_in(dport, DZ_TCR); /* read the TX flag */ + tmp |= mask; /* set the TX flag */ + dz_out(dport, DZ_TCR, tmp); +} + +static void dz_stop_rx(struct uart_port *uport) +{ + struct dz_port *dport = to_dport(uport); + + dport->cflag &= ~DZ_RXENAB; + dz_out(dport, DZ_LPR, dport->cflag); +} + +/* + * ------------------------------------------------------------ + * + * Here start the interrupt handling routines. All of the following + * subroutines are declared as inline and are folded into + * dz_interrupt. They were separated out for readability's sake. + * + * Note: dz_interrupt() is a "fast" interrupt, which means that it + * runs with interrupts turned off. People who may want to modify + * dz_interrupt() should try to keep the interrupt handler as fast as + * possible. After you are done making modifications, it is not a bad + * idea to do: + * + * make drivers/serial/dz.s + * + * and look at the resulting assemble code in dz.s. + * + * ------------------------------------------------------------ + */ + +/* + * ------------------------------------------------------------ + * receive_char () + * + * This routine deals with inputs from any lines. + * ------------------------------------------------------------ + */ +static inline void dz_receive_chars(struct dz_mux *mux) +{ + struct uart_port *uport; + struct dz_port *dport = &mux->dport[0]; + struct uart_icount *icount; + int lines_rx[DZ_NB_PORT] = { [0 ... DZ_NB_PORT - 1] = 0 }; + unsigned char ch, flag; + u16 status; + int i; + + while ((status = dz_in(dport, DZ_RBUF)) & DZ_DVAL) { + dport = &mux->dport[LINE(status)]; + uport = &dport->port; + + ch = UCHAR(status); /* grab the char */ + flag = TTY_NORMAL; + + icount = &uport->icount; + icount->rx++; + + if (unlikely(status & (DZ_OERR | DZ_FERR | DZ_PERR))) { + + /* + * There is no separate BREAK status bit, so treat + * null characters with framing errors as BREAKs; + * normally, otherwise. For this move the Framing + * Error bit to a simulated BREAK bit. + */ + if (!ch) { + status |= (status & DZ_FERR) >> + (ffs(DZ_FERR) - ffs(DZ_BREAK)); + status &= ~DZ_FERR; + } + + /* Handle SysRq/SAK & keep track of the statistics. */ + if (status & DZ_BREAK) { + icount->brk++; + if (uart_handle_break(uport)) + continue; + } else if (status & DZ_FERR) + icount->frame++; + else if (status & DZ_PERR) + icount->parity++; + if (status & DZ_OERR) + icount->overrun++; + + status &= uport->read_status_mask; + if (status & DZ_BREAK) + flag = TTY_BREAK; + else if (status & DZ_FERR) + flag = TTY_FRAME; + else if (status & DZ_PERR) + flag = TTY_PARITY; + + } + + if (uart_handle_sysrq_char(uport, ch)) + continue; + + uart_insert_char(uport, status, DZ_OERR, ch, flag); + lines_rx[LINE(status)] = 1; + } + for (i = 0; i < DZ_NB_PORT; i++) + if (lines_rx[i]) + tty_flip_buffer_push(&mux->dport[i].port.state->port); +} + +/* + * ------------------------------------------------------------ + * transmit_char () + * + * This routine deals with outputs to any lines. + * ------------------------------------------------------------ + */ +static inline void dz_transmit_chars(struct dz_mux *mux) +{ + struct dz_port *dport = &mux->dport[0]; + struct circ_buf *xmit; + unsigned char tmp; + u16 status; + + status = dz_in(dport, DZ_CSR); + dport = &mux->dport[LINE(status)]; + xmit = &dport->port.state->xmit; + + if (dport->port.x_char) { /* XON/XOFF chars */ + dz_out(dport, DZ_TDR, dport->port.x_char); + dport->port.icount.tx++; + dport->port.x_char = 0; + return; + } + /* If nothing to do or stopped or hardware stopped. */ + if (uart_circ_empty(xmit) || uart_tx_stopped(&dport->port)) { + spin_lock(&dport->port.lock); + dz_stop_tx(&dport->port); + spin_unlock(&dport->port.lock); + return; + } + + /* + * If something to do... (remember the dz has no output fifo, + * so we go one char at a time) :-< + */ + tmp = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & (DZ_XMIT_SIZE - 1); + dz_out(dport, DZ_TDR, tmp); + dport->port.icount.tx++; + + if (uart_circ_chars_pending(xmit) < DZ_WAKEUP_CHARS) + uart_write_wakeup(&dport->port); + + /* Are we are done. */ + if (uart_circ_empty(xmit)) { + spin_lock(&dport->port.lock); + dz_stop_tx(&dport->port); + spin_unlock(&dport->port.lock); + } +} + +/* + * ------------------------------------------------------------ + * check_modem_status() + * + * DS 3100 & 5100: Only valid for the MODEM line, duh! + * DS 5000/200: Valid for the MODEM and PRINTER line. + * ------------------------------------------------------------ + */ +static inline void check_modem_status(struct dz_port *dport) +{ + /* + * FIXME: + * 1. No status change interrupt; use a timer. + * 2. Handle the 3100/5000 as appropriate. --macro + */ + u16 status; + + /* If not the modem line just return. */ + if (dport->port.line != DZ_MODEM) + return; + + status = dz_in(dport, DZ_MSR); + + /* it's easy, since DSR2 is the only bit in the register */ + if (status) + dport->port.icount.dsr++; +} + +/* + * ------------------------------------------------------------ + * dz_interrupt () + * + * this is the main interrupt routine for the DZ chip. + * It deals with the multiple ports. + * ------------------------------------------------------------ + */ +static irqreturn_t dz_interrupt(int irq, void *dev_id) +{ + struct dz_mux *mux = dev_id; + struct dz_port *dport = &mux->dport[0]; + u16 status; + + /* get the reason why we just got an irq */ + status = dz_in(dport, DZ_CSR); + + if ((status & (DZ_RDONE | DZ_RIE)) == (DZ_RDONE | DZ_RIE)) + dz_receive_chars(mux); + + if ((status & (DZ_TRDY | DZ_TIE)) == (DZ_TRDY | DZ_TIE)) + dz_transmit_chars(mux); + + return IRQ_HANDLED; +} + +/* + * ------------------------------------------------------------------- + * Here ends the DZ interrupt routines. + * ------------------------------------------------------------------- + */ + +static unsigned int dz_get_mctrl(struct uart_port *uport) +{ + /* + * FIXME: Handle the 3100/5000 as appropriate. --macro + */ + struct dz_port *dport = to_dport(uport); + unsigned int mctrl = TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; + + if (dport->port.line == DZ_MODEM) { + if (dz_in(dport, DZ_MSR) & DZ_MODEM_DSR) + mctrl &= ~TIOCM_DSR; + } + + return mctrl; +} + +static void dz_set_mctrl(struct uart_port *uport, unsigned int mctrl) +{ + /* + * FIXME: Handle the 3100/5000 as appropriate. --macro + */ + struct dz_port *dport = to_dport(uport); + u16 tmp; + + if (dport->port.line == DZ_MODEM) { + tmp = dz_in(dport, DZ_TCR); + if (mctrl & TIOCM_DTR) + tmp &= ~DZ_MODEM_DTR; + else + tmp |= DZ_MODEM_DTR; + dz_out(dport, DZ_TCR, tmp); + } +} + +/* + * ------------------------------------------------------------------- + * startup () + * + * various initialization tasks + * ------------------------------------------------------------------- + */ +static int dz_startup(struct uart_port *uport) +{ + struct dz_port *dport = to_dport(uport); + struct dz_mux *mux = dport->mux; + unsigned long flags; + int irq_guard; + int ret; + u16 tmp; + + irq_guard = atomic_add_return(1, &mux->irq_guard); + if (irq_guard != 1) + return 0; + + ret = request_irq(dport->port.irq, dz_interrupt, + IRQF_SHARED, "dz", mux); + if (ret) { + atomic_add(-1, &mux->irq_guard); + printk(KERN_ERR "dz: Cannot get IRQ %d!\n", dport->port.irq); + return ret; + } + + spin_lock_irqsave(&dport->port.lock, flags); + + /* Enable interrupts. */ + tmp = dz_in(dport, DZ_CSR); + tmp |= DZ_RIE | DZ_TIE; + dz_out(dport, DZ_CSR, tmp); + + spin_unlock_irqrestore(&dport->port.lock, flags); + + return 0; +} + +/* + * ------------------------------------------------------------------- + * shutdown () + * + * This routine will shutdown a serial port; interrupts are disabled, and + * DTR is dropped if the hangup on close termio flag is on. + * ------------------------------------------------------------------- + */ +static void dz_shutdown(struct uart_port *uport) +{ + struct dz_port *dport = to_dport(uport); + struct dz_mux *mux = dport->mux; + unsigned long flags; + int irq_guard; + u16 tmp; + + spin_lock_irqsave(&dport->port.lock, flags); + dz_stop_tx(&dport->port); + spin_unlock_irqrestore(&dport->port.lock, flags); + + irq_guard = atomic_add_return(-1, &mux->irq_guard); + if (!irq_guard) { + /* Disable interrupts. */ + tmp = dz_in(dport, DZ_CSR); + tmp &= ~(DZ_RIE | DZ_TIE); + dz_out(dport, DZ_CSR, tmp); + + free_irq(dport->port.irq, mux); + } +} + +/* + * ------------------------------------------------------------------- + * dz_tx_empty() -- get the transmitter empty status + * + * Purpose: Let user call ioctl() to get info when the UART physically + * is emptied. On bus types like RS485, the transmitter must + * release the bus after transmitting. This must be done when + * the transmit shift register is empty, not be done when the + * transmit holding register is empty. This functionality + * allows an RS485 driver to be written in user space. + * ------------------------------------------------------------------- + */ +static unsigned int dz_tx_empty(struct uart_port *uport) +{ + struct dz_port *dport = to_dport(uport); + unsigned short tmp, mask = 1 << dport->port.line; + + tmp = dz_in(dport, DZ_TCR); + tmp &= mask; + + return tmp ? 0 : TIOCSER_TEMT; +} + +static void dz_break_ctl(struct uart_port *uport, int break_state) +{ + /* + * FIXME: Can't access BREAK bits in TDR easily; + * reuse the code for polled TX. --macro + */ + struct dz_port *dport = to_dport(uport); + unsigned long flags; + unsigned short tmp, mask = 1 << dport->port.line; + + spin_lock_irqsave(&uport->lock, flags); + tmp = dz_in(dport, DZ_TCR); + if (break_state) + tmp |= mask; + else + tmp &= ~mask; + dz_out(dport, DZ_TCR, tmp); + spin_unlock_irqrestore(&uport->lock, flags); +} + +static int dz_encode_baud_rate(unsigned int baud) +{ + switch (baud) { + case 50: + return DZ_B50; + case 75: + return DZ_B75; + case 110: + return DZ_B110; + case 134: + return DZ_B134; + case 150: + return DZ_B150; + case 300: + return DZ_B300; + case 600: + return DZ_B600; + case 1200: + return DZ_B1200; + case 1800: + return DZ_B1800; + case 2000: + return DZ_B2000; + case 2400: + return DZ_B2400; + case 3600: + return DZ_B3600; + case 4800: + return DZ_B4800; + case 7200: + return DZ_B7200; + case 9600: + return DZ_B9600; + default: + return -1; + } +} + + +static void dz_reset(struct dz_port *dport) +{ + struct dz_mux *mux = dport->mux; + + if (mux->initialised) + return; + + dz_out(dport, DZ_CSR, DZ_CLR); + while (dz_in(dport, DZ_CSR) & DZ_CLR); + iob(); + + /* Enable scanning. */ + dz_out(dport, DZ_CSR, DZ_MSE); + + mux->initialised = 1; +} + +static void dz_set_termios(struct uart_port *uport, struct ktermios *termios, + struct ktermios *old_termios) +{ + struct dz_port *dport = to_dport(uport); + unsigned long flags; + unsigned int cflag, baud; + int bflag; + + cflag = dport->port.line; + + switch (termios->c_cflag & CSIZE) { + case CS5: + cflag |= DZ_CS5; + break; + case CS6: + cflag |= DZ_CS6; + break; + case CS7: + cflag |= DZ_CS7; + break; + case CS8: + default: + cflag |= DZ_CS8; + } + + if (termios->c_cflag & CSTOPB) + cflag |= DZ_CSTOPB; + if (termios->c_cflag & PARENB) + cflag |= DZ_PARENB; + if (termios->c_cflag & PARODD) + cflag |= DZ_PARODD; + + baud = uart_get_baud_rate(uport, termios, old_termios, 50, 9600); + bflag = dz_encode_baud_rate(baud); + if (bflag < 0) { /* Try to keep unchanged. */ + baud = uart_get_baud_rate(uport, old_termios, NULL, 50, 9600); + bflag = dz_encode_baud_rate(baud); + if (bflag < 0) { /* Resort to 9600. */ + baud = 9600; + bflag = DZ_B9600; + } + tty_termios_encode_baud_rate(termios, baud, baud); + } + cflag |= bflag; + + if (termios->c_cflag & CREAD) + cflag |= DZ_RXENAB; + + spin_lock_irqsave(&dport->port.lock, flags); + + uart_update_timeout(uport, termios->c_cflag, baud); + + dz_out(dport, DZ_LPR, cflag); + dport->cflag = cflag; + + /* setup accept flag */ + dport->port.read_status_mask = DZ_OERR; + if (termios->c_iflag & INPCK) + dport->port.read_status_mask |= DZ_FERR | DZ_PERR; + if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) + dport->port.read_status_mask |= DZ_BREAK; + + /* characters to ignore */ + uport->ignore_status_mask = 0; + if ((termios->c_iflag & (IGNPAR | IGNBRK)) == (IGNPAR | IGNBRK)) + dport->port.ignore_status_mask |= DZ_OERR; + if (termios->c_iflag & IGNPAR) + dport->port.ignore_status_mask |= DZ_FERR | DZ_PERR; + if (termios->c_iflag & IGNBRK) + dport->port.ignore_status_mask |= DZ_BREAK; + + spin_unlock_irqrestore(&dport->port.lock, flags); +} + +/* + * Hack alert! + * Required solely so that the initial PROM-based console + * works undisturbed in parallel with this one. + */ +static void dz_pm(struct uart_port *uport, unsigned int state, + unsigned int oldstate) +{ + struct dz_port *dport = to_dport(uport); + unsigned long flags; + + spin_lock_irqsave(&dport->port.lock, flags); + if (state < 3) + dz_start_tx(&dport->port); + else + dz_stop_tx(&dport->port); + spin_unlock_irqrestore(&dport->port.lock, flags); +} + + +static const char *dz_type(struct uart_port *uport) +{ + return "DZ"; +} + +static void dz_release_port(struct uart_port *uport) +{ + struct dz_mux *mux = to_dport(uport)->mux; + int map_guard; + + iounmap(uport->membase); + uport->membase = NULL; + + map_guard = atomic_add_return(-1, &mux->map_guard); + if (!map_guard) + release_mem_region(uport->mapbase, dec_kn_slot_size); +} + +static int dz_map_port(struct uart_port *uport) +{ + if (!uport->membase) + uport->membase = ioremap(uport->mapbase, + dec_kn_slot_size); + if (!uport->membase) { + printk(KERN_ERR "dz: Cannot map MMIO\n"); + return -ENOMEM; + } + return 0; +} + +static int dz_request_port(struct uart_port *uport) +{ + struct dz_mux *mux = to_dport(uport)->mux; + int map_guard; + int ret; + + map_guard = atomic_add_return(1, &mux->map_guard); + if (map_guard == 1) { + if (!request_mem_region(uport->mapbase, dec_kn_slot_size, + "dz")) { + atomic_add(-1, &mux->map_guard); + printk(KERN_ERR + "dz: Unable to reserve MMIO resource\n"); + return -EBUSY; + } + } + ret = dz_map_port(uport); + if (ret) { + map_guard = atomic_add_return(-1, &mux->map_guard); + if (!map_guard) + release_mem_region(uport->mapbase, dec_kn_slot_size); + return ret; + } + return 0; +} + +static void dz_config_port(struct uart_port *uport, int flags) +{ + struct dz_port *dport = to_dport(uport); + + if (flags & UART_CONFIG_TYPE) { + if (dz_request_port(uport)) + return; + + uport->type = PORT_DZ; + + dz_reset(dport); + } +} + +/* + * Verify the new serial_struct (for TIOCSSERIAL). + */ +static int dz_verify_port(struct uart_port *uport, struct serial_struct *ser) +{ + int ret = 0; + + if (ser->type != PORT_UNKNOWN && ser->type != PORT_DZ) + ret = -EINVAL; + if (ser->irq != uport->irq) + ret = -EINVAL; + return ret; +} + +static const struct uart_ops dz_ops = { + .tx_empty = dz_tx_empty, + .get_mctrl = dz_get_mctrl, + .set_mctrl = dz_set_mctrl, + .stop_tx = dz_stop_tx, + .start_tx = dz_start_tx, + .stop_rx = dz_stop_rx, + .break_ctl = dz_break_ctl, + .startup = dz_startup, + .shutdown = dz_shutdown, + .set_termios = dz_set_termios, + .pm = dz_pm, + .type = dz_type, + .release_port = dz_release_port, + .request_port = dz_request_port, + .config_port = dz_config_port, + .verify_port = dz_verify_port, +}; + +static void __init dz_init_ports(void) +{ + static int first = 1; + unsigned long base; + int line; + + if (!first) + return; + first = 0; + + if (mips_machtype == MACH_DS23100 || mips_machtype == MACH_DS5100) + base = dec_kn_slot_base + KN01_DZ11; + else + base = dec_kn_slot_base + KN02_DZ11; + + for (line = 0; line < DZ_NB_PORT; line++) { + struct dz_port *dport = &dz_mux.dport[line]; + struct uart_port *uport = &dport->port; + + dport->mux = &dz_mux; + + uport->irq = dec_interrupt[DEC_IRQ_DZ11]; + uport->fifosize = 1; + uport->iotype = UPIO_MEM; + uport->flags = UPF_BOOT_AUTOCONF; + uport->ops = &dz_ops; + uport->line = line; + uport->mapbase = base; + uport->has_sysrq = IS_ENABLED(CONFIG_SERIAL_DZ_CONSOLE); + } +} + +#ifdef CONFIG_SERIAL_DZ_CONSOLE +/* + * ------------------------------------------------------------------- + * dz_console_putchar() -- transmit a character + * + * Polled transmission. This is tricky. We need to mask transmit + * interrupts so that they do not interfere, enable the transmitter + * for the line requested and then wait till the transmit scanner + * requests data for this line. But it may request data for another + * line first, in which case we have to disable its transmitter and + * repeat waiting till our line pops up. Only then the character may + * be transmitted. Finally, the state of the transmitter mask is + * restored. Welcome to the world of PDP-11! + * ------------------------------------------------------------------- + */ +static void dz_console_putchar(struct uart_port *uport, int ch) +{ + struct dz_port *dport = to_dport(uport); + unsigned long flags; + unsigned short csr, tcr, trdy, mask; + int loops = 10000; + + spin_lock_irqsave(&dport->port.lock, flags); + csr = dz_in(dport, DZ_CSR); + dz_out(dport, DZ_CSR, csr & ~DZ_TIE); + tcr = dz_in(dport, DZ_TCR); + tcr |= 1 << dport->port.line; + mask = tcr; + dz_out(dport, DZ_TCR, mask); + iob(); + spin_unlock_irqrestore(&dport->port.lock, flags); + + do { + trdy = dz_in(dport, DZ_CSR); + if (!(trdy & DZ_TRDY)) + continue; + trdy = (trdy & DZ_TLINE) >> 8; + if (trdy == dport->port.line) + break; + mask &= ~(1 << trdy); + dz_out(dport, DZ_TCR, mask); + iob(); + udelay(2); + } while (--loops); + + if (loops) /* Cannot send otherwise. */ + dz_out(dport, DZ_TDR, ch); + + dz_out(dport, DZ_TCR, tcr); + dz_out(dport, DZ_CSR, csr); +} + +/* + * ------------------------------------------------------------------- + * dz_console_print () + * + * dz_console_print is registered for printk. + * The console must be locked when we get here. + * ------------------------------------------------------------------- + */ +static void dz_console_print(struct console *co, + const char *str, + unsigned int count) +{ + struct dz_port *dport = &dz_mux.dport[co->index]; +#ifdef DEBUG_DZ + prom_printf((char *) str); +#endif + uart_console_write(&dport->port, str, count, dz_console_putchar); +} + +static int __init dz_console_setup(struct console *co, char *options) +{ + struct dz_port *dport = &dz_mux.dport[co->index]; + struct uart_port *uport = &dport->port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + int ret; + + ret = dz_map_port(uport); + if (ret) + return ret; + + spin_lock_init(&dport->port.lock); /* For dz_pm(). */ + + dz_reset(dport); + dz_pm(uport, 0, -1); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&dport->port, co, baud, parity, bits, flow); +} + +static struct uart_driver dz_reg; +static struct console dz_console = { + .name = "ttyS", + .write = dz_console_print, + .device = uart_console_device, + .setup = dz_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &dz_reg, +}; + +static int __init dz_serial_console_init(void) +{ + if (!IOASIC) { + dz_init_ports(); + register_console(&dz_console); + return 0; + } else + return -ENXIO; +} + +console_initcall(dz_serial_console_init); + +#define SERIAL_DZ_CONSOLE &dz_console +#else +#define SERIAL_DZ_CONSOLE NULL +#endif /* CONFIG_SERIAL_DZ_CONSOLE */ + +static struct uart_driver dz_reg = { + .owner = THIS_MODULE, + .driver_name = "serial", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .nr = DZ_NB_PORT, + .cons = SERIAL_DZ_CONSOLE, +}; + +static int __init dz_init(void) +{ + int ret, i; + + if (IOASIC) + return -ENXIO; + + printk("%s%s\n", dz_name, dz_version); + + dz_init_ports(); + + ret = uart_register_driver(&dz_reg); + if (ret) + return ret; + + for (i = 0; i < DZ_NB_PORT; i++) + uart_add_one_port(&dz_reg, &dz_mux.dport[i].port); + + return 0; +} + +module_init(dz_init); diff --git a/drivers/tty/serial/dz.h b/drivers/tty/serial/dz.h new file mode 100644 index 000000000..3b3e31954 --- /dev/null +++ b/drivers/tty/serial/dz.h @@ -0,0 +1,130 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * dz.h: Serial port driver for DECstations equipped + * with the DZ chipset. + * + * Copyright (C) 1998 Olivier A. D. Lebaillif + * + * Email: olivier.lebaillif@ifrsys.com + * + * Copyright (C) 2004, 2006 Maciej W. Rozycki + */ +#ifndef DZ_SERIAL_H +#define DZ_SERIAL_H + +/* + * Definitions for the Control and Status Register. + */ +#define DZ_TRDY 0x8000 /* Transmitter empty */ +#define DZ_TIE 0x4000 /* Transmitter Interrupt Enbl */ +#define DZ_TLINE 0x0300 /* Transmitter Line Number */ +#define DZ_RDONE 0x0080 /* Receiver data ready */ +#define DZ_RIE 0x0040 /* Receive Interrupt Enable */ +#define DZ_MSE 0x0020 /* Master Scan Enable */ +#define DZ_CLR 0x0010 /* Master reset */ +#define DZ_MAINT 0x0008 /* Loop Back Mode */ + +/* + * Definitions for the Receiver Buffer Register. + */ +#define DZ_RBUF_MASK 0x00FF /* Data Mask */ +#define DZ_LINE_MASK 0x0300 /* Line Mask */ +#define DZ_DVAL 0x8000 /* Valid Data indicator */ +#define DZ_OERR 0x4000 /* Overrun error indicator */ +#define DZ_FERR 0x2000 /* Frame error indicator */ +#define DZ_PERR 0x1000 /* Parity error indicator */ + +#define DZ_BREAK 0x0800 /* BREAK event software flag */ + +#define LINE(x) ((x & DZ_LINE_MASK) >> 8) /* Get the line number + from the input buffer */ +#define UCHAR(x) ((unsigned char)(x & DZ_RBUF_MASK)) + +/* + * Definitions for the Transmit Control Register. + */ +#define DZ_LINE_KEYBOARD 0x0001 +#define DZ_LINE_MOUSE 0x0002 +#define DZ_LINE_MODEM 0x0004 +#define DZ_LINE_PRINTER 0x0008 + +#define DZ_MODEM_RTS 0x0800 /* RTS for the modem line (2) */ +#define DZ_MODEM_DTR 0x0400 /* DTR for the modem line (2) */ +#define DZ_PRINT_RTS 0x0200 /* RTS for the prntr line (3) */ +#define DZ_PRINT_DTR 0x0100 /* DTR for the prntr line (3) */ +#define DZ_LNENB 0x000f /* Transmitter Line Enable */ + +/* + * Definitions for the Modem Status Register. + */ +#define DZ_MODEM_RI 0x0800 /* RI for the modem line (2) */ +#define DZ_MODEM_CD 0x0400 /* CD for the modem line (2) */ +#define DZ_MODEM_DSR 0x0200 /* DSR for the modem line (2) */ +#define DZ_MODEM_CTS 0x0100 /* CTS for the modem line (2) */ +#define DZ_PRINT_RI 0x0008 /* RI for the printer line (3) */ +#define DZ_PRINT_CD 0x0004 /* CD for the printer line (3) */ +#define DZ_PRINT_DSR 0x0002 /* DSR for the prntr line (3) */ +#define DZ_PRINT_CTS 0x0001 /* CTS for the prntr line (3) */ + +/* + * Definitions for the Transmit Data Register. + */ +#define DZ_BRK0 0x0100 /* Break assertion for line 0 */ +#define DZ_BRK1 0x0200 /* Break assertion for line 1 */ +#define DZ_BRK2 0x0400 /* Break assertion for line 2 */ +#define DZ_BRK3 0x0800 /* Break assertion for line 3 */ + +/* + * Definitions for the Line Parameter Register. + */ +#define DZ_KEYBOARD 0x0000 /* line 0 = keyboard */ +#define DZ_MOUSE 0x0001 /* line 1 = mouse */ +#define DZ_MODEM 0x0002 /* line 2 = modem */ +#define DZ_PRINTER 0x0003 /* line 3 = printer */ + +#define DZ_CSIZE 0x0018 /* Number of bits per byte (mask) */ +#define DZ_CS5 0x0000 /* 5 bits per byte */ +#define DZ_CS6 0x0008 /* 6 bits per byte */ +#define DZ_CS7 0x0010 /* 7 bits per byte */ +#define DZ_CS8 0x0018 /* 8 bits per byte */ + +#define DZ_CSTOPB 0x0020 /* 2 stop bits instead of one */ + +#define DZ_PARENB 0x0040 /* Parity enable */ +#define DZ_PARODD 0x0080 /* Odd parity instead of even */ + +#define DZ_CBAUD 0x0E00 /* Baud Rate (mask) */ +#define DZ_B50 0x0000 +#define DZ_B75 0x0100 +#define DZ_B110 0x0200 +#define DZ_B134 0x0300 +#define DZ_B150 0x0400 +#define DZ_B300 0x0500 +#define DZ_B600 0x0600 +#define DZ_B1200 0x0700 +#define DZ_B1800 0x0800 +#define DZ_B2000 0x0900 +#define DZ_B2400 0x0A00 +#define DZ_B3600 0x0B00 +#define DZ_B4800 0x0C00 +#define DZ_B7200 0x0D00 +#define DZ_B9600 0x0E00 + +#define DZ_RXENAB 0x1000 /* Receiver Enable */ + +/* + * Addresses for the DZ registers + */ +#define DZ_CSR 0x00 /* Control and Status Register */ +#define DZ_RBUF 0x08 /* Receive Buffer */ +#define DZ_LPR 0x08 /* Line Parameters Register */ +#define DZ_TCR 0x10 /* Transmitter Control Register */ +#define DZ_MSR 0x18 /* Modem Status Register */ +#define DZ_TDR 0x18 /* Transmit Data Register */ + +#define DZ_NB_PORT 4 + +#define DZ_XMIT_SIZE 4096 /* buffer size */ +#define DZ_WAKEUP_CHARS DZ_XMIT_SIZE/4 + +#endif /* DZ_SERIAL_H */ diff --git a/drivers/tty/serial/earlycon-arm-semihost.c b/drivers/tty/serial/earlycon-arm-semihost.c new file mode 100644 index 000000000..fa096c10b --- /dev/null +++ b/drivers/tty/serial/earlycon-arm-semihost.c @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2012 ARM Ltd. + * Author: Marc Zyngier + * + * Adapted for ARM and earlycon: + * Copyright (C) 2014 Linaro Ltd. + * Author: Rob Herring + */ +#include +#include +#include +#include + +#ifdef CONFIG_THUMB2_KERNEL +#define SEMIHOST_SWI "0xab" +#else +#define SEMIHOST_SWI "0x123456" +#endif + +/* + * Semihosting-based debug console + */ +static void smh_putc(struct uart_port *port, int c) +{ +#ifdef CONFIG_ARM64 + asm volatile("mov x1, %0\n" + "mov x0, #3\n" + "hlt 0xf000\n" + : : "r" (&c) : "x0", "x1", "memory"); +#else + asm volatile("mov r1, %0\n" + "mov r0, #3\n" + "svc " SEMIHOST_SWI "\n" + : : "r" (&c) : "r0", "r1", "memory"); +#endif +} + +static void smh_write(struct console *con, const char *s, unsigned n) +{ + struct earlycon_device *dev = con->data; + uart_console_write(&dev->port, s, n, smh_putc); +} + +static int +__init early_smh_setup(struct earlycon_device *device, const char *opt) +{ + device->con->write = smh_write; + return 0; +} +EARLYCON_DECLARE(smh, early_smh_setup); diff --git a/drivers/tty/serial/earlycon-riscv-sbi.c b/drivers/tty/serial/earlycon-riscv-sbi.c new file mode 100644 index 000000000..ce81523c3 --- /dev/null +++ b/drivers/tty/serial/earlycon-riscv-sbi.c @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * RISC-V SBI based earlycon + * + * Copyright (C) 2018 Anup Patel + */ +#include +#include +#include +#include +#include + +static void sbi_putc(struct uart_port *port, int c) +{ + sbi_console_putchar(c); +} + +static void sbi_console_write(struct console *con, + const char *s, unsigned n) +{ + struct earlycon_device *dev = con->data; + uart_console_write(&dev->port, s, n, sbi_putc); +} + +static int __init early_sbi_setup(struct earlycon_device *device, + const char *opt) +{ + device->con->write = sbi_console_write; + return 0; +} +EARLYCON_DECLARE(sbi, early_sbi_setup); diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c new file mode 100644 index 000000000..b70877932 --- /dev/null +++ b/drivers/tty/serial/earlycon.c @@ -0,0 +1,322 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2014 Linaro Ltd. + * Author: Rob Herring + * + * Based on 8250 earlycon: + * (c) Copyright 2004 Hewlett-Packard Development Company, L.P. + * Bjorn Helgaas + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_FIX_EARLYCON_MEM +#include +#endif + +#include + +static struct console early_con = { + .name = "uart", /* fixed up at earlycon registration */ + .flags = CON_PRINTBUFFER | CON_BOOT, + .index = 0, +}; + +static struct earlycon_device early_console_dev = { + .con = &early_con, +}; + +static void __iomem * __init earlycon_map(resource_size_t paddr, size_t size) +{ + void __iomem *base; +#ifdef CONFIG_FIX_EARLYCON_MEM + set_fixmap_io(FIX_EARLYCON_MEM_BASE, paddr & PAGE_MASK); + base = (void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE); + base += paddr & ~PAGE_MASK; +#else + base = ioremap(paddr, size); +#endif + if (!base) + pr_err("%s: Couldn't map %pa\n", __func__, &paddr); + + return base; +} + +static void __init earlycon_init(struct earlycon_device *device, + const char *name) +{ + struct console *earlycon = device->con; + const char *s; + size_t len; + + /* scan backwards from end of string for first non-numeral */ + for (s = name + strlen(name); + s > name && s[-1] >= '0' && s[-1] <= '9'; + s--) + ; + if (*s) + earlycon->index = simple_strtoul(s, NULL, 10); + len = s - name; + strlcpy(earlycon->name, name, min(len + 1, sizeof(earlycon->name))); + earlycon->data = &early_console_dev; +} + +static void __init earlycon_print_info(struct earlycon_device *device) +{ + struct console *earlycon = device->con; + struct uart_port *port = &device->port; + + if (port->iotype == UPIO_MEM || port->iotype == UPIO_MEM16 || + port->iotype == UPIO_MEM32 || port->iotype == UPIO_MEM32BE) + pr_info("%s%d at MMIO%s %pa (options '%s')\n", + earlycon->name, earlycon->index, + (port->iotype == UPIO_MEM) ? "" : + (port->iotype == UPIO_MEM16) ? "16" : + (port->iotype == UPIO_MEM32) ? "32" : "32be", + &port->mapbase, device->options); + else + pr_info("%s%d at I/O port 0x%lx (options '%s')\n", + earlycon->name, earlycon->index, + port->iobase, device->options); +} + +static int __init parse_options(struct earlycon_device *device, char *options) +{ + struct uart_port *port = &device->port; + int length; + resource_size_t addr; + + if (uart_parse_earlycon(options, &port->iotype, &addr, &options)) + return -EINVAL; + + switch (port->iotype) { + case UPIO_MEM: + port->mapbase = addr; + break; + case UPIO_MEM16: + port->regshift = 1; + port->mapbase = addr; + break; + case UPIO_MEM32: + case UPIO_MEM32BE: + port->regshift = 2; + port->mapbase = addr; + break; + case UPIO_PORT: + port->iobase = addr; + break; + default: + return -EINVAL; + } + + if (options) { + device->baud = simple_strtoul(options, NULL, 0); + length = min(strcspn(options, " ") + 1, + (size_t)(sizeof(device->options))); + strlcpy(device->options, options, length); + } + + return 0; +} + +static int __init register_earlycon(char *buf, const struct earlycon_id *match) +{ + int err; + struct uart_port *port = &early_console_dev.port; + + /* On parsing error, pass the options buf to the setup function */ + if (buf && !parse_options(&early_console_dev, buf)) + buf = NULL; + + spin_lock_init(&port->lock); + port->uartclk = BASE_BAUD * 16; + if (port->mapbase) + port->membase = earlycon_map(port->mapbase, 64); + + earlycon_init(&early_console_dev, match->name); + err = match->setup(&early_console_dev, buf); + earlycon_print_info(&early_console_dev); + if (err < 0) + return err; + if (!early_console_dev.con->write) + return -ENODEV; + + register_console(early_console_dev.con); + return 0; +} + +/** + * setup_earlycon - match and register earlycon console + * @buf: earlycon param string + * + * Registers the earlycon console matching the earlycon specified + * in the param string @buf. Acceptable param strings are of the form + * ,io|mmio|mmio32|mmio32be,, + * ,0x, + * , + * + * + * Only for the third form does the earlycon setup() method receive the + * string in the 'options' parameter; all other forms set + * the parameter to NULL. + * + * Returns 0 if an attempt to register the earlycon was made, + * otherwise negative error code + */ +int __init setup_earlycon(char *buf) +{ + const struct earlycon_id **p_match; + bool empty_compatible = true; + + if (!buf || !buf[0]) + return -EINVAL; + + if (early_con.flags & CON_ENABLED) + return -EALREADY; + +again: + for (p_match = __earlycon_table; p_match < __earlycon_table_end; + p_match++) { + const struct earlycon_id *match = *p_match; + size_t len = strlen(match->name); + + if (strncmp(buf, match->name, len)) + continue; + + /* prefer entries with empty compatible */ + if (empty_compatible && *match->compatible) + continue; + + if (buf[len]) { + if (buf[len] != ',') + continue; + buf += len + 1; + } else + buf = NULL; + + return register_earlycon(buf, match); + } + + if (empty_compatible) { + empty_compatible = false; + goto again; + } + + return -ENOENT; +} + +/* + * This defers the initialization of the early console until after ACPI has + * been initialized. + */ +bool earlycon_acpi_spcr_enable __initdata; + +/* early_param wrapper for setup_earlycon() */ +static int __init param_setup_earlycon(char *buf) +{ + int err; + + /* Just 'earlycon' is a valid param for devicetree and ACPI SPCR. */ + if (!buf || !buf[0]) { + if (IS_ENABLED(CONFIG_ACPI_SPCR_TABLE)) { + earlycon_acpi_spcr_enable = true; + return 0; + } else if (!buf) { + return early_init_dt_scan_chosen_stdout(); + } + } + + err = setup_earlycon(buf); + if (err == -ENOENT || err == -EALREADY) + return 0; + return err; +} +early_param("earlycon", param_setup_earlycon); + +#ifdef CONFIG_OF_EARLY_FLATTREE + +int __init of_setup_earlycon(const struct earlycon_id *match, + unsigned long node, + const char *options) +{ + int err; + struct uart_port *port = &early_console_dev.port; + const __be32 *val; + bool big_endian; + u64 addr; + + spin_lock_init(&port->lock); + port->iotype = UPIO_MEM; + addr = of_flat_dt_translate_address(node); + if (addr == OF_BAD_ADDR) { + pr_warn("[%s] bad address\n", match->name); + return -ENXIO; + } + port->mapbase = addr; + + val = of_get_flat_dt_prop(node, "reg-offset", NULL); + if (val) + port->mapbase += be32_to_cpu(*val); + port->membase = earlycon_map(port->mapbase, SZ_4K); + + val = of_get_flat_dt_prop(node, "reg-shift", NULL); + if (val) + port->regshift = be32_to_cpu(*val); + big_endian = of_get_flat_dt_prop(node, "big-endian", NULL) != NULL || + (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN) && + of_get_flat_dt_prop(node, "native-endian", NULL) != NULL); + val = of_get_flat_dt_prop(node, "reg-io-width", NULL); + if (val) { + switch (be32_to_cpu(*val)) { + case 1: + port->iotype = UPIO_MEM; + break; + case 2: + port->iotype = UPIO_MEM16; + break; + case 4: + port->iotype = (big_endian) ? UPIO_MEM32BE : UPIO_MEM32; + break; + default: + pr_warn("[%s] unsupported reg-io-width\n", match->name); + return -EINVAL; + } + } + + val = of_get_flat_dt_prop(node, "current-speed", NULL); + if (val) + early_console_dev.baud = be32_to_cpu(*val); + + val = of_get_flat_dt_prop(node, "clock-frequency", NULL); + if (val) + port->uartclk = be32_to_cpu(*val); + + if (options) { + early_console_dev.baud = simple_strtoul(options, NULL, 0); + strlcpy(early_console_dev.options, options, + sizeof(early_console_dev.options)); + } + earlycon_init(&early_console_dev, match->name); + err = match->setup(&early_console_dev, options); + earlycon_print_info(&early_console_dev); + if (err < 0) + return err; + if (!early_console_dev.con->write) + return -ENODEV; + + + register_console(early_console_dev.con); + return 0; +} + +#endif /* CONFIG_OF_EARLY_FLATTREE */ diff --git a/drivers/tty/serial/efm32-uart.c b/drivers/tty/serial/efm32-uart.c new file mode 100644 index 000000000..f12f29cf4 --- /dev/null +++ b/drivers/tty/serial/efm32-uart.c @@ -0,0 +1,852 @@ +// SPDX-License-Identifier: GPL-2.0 +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define DRIVER_NAME "efm32-uart" +#define DEV_NAME "ttyefm" + +#define UARTn_CTRL 0x00 +#define UARTn_CTRL_SYNC 0x0001 +#define UARTn_CTRL_TXBIL 0x1000 + +#define UARTn_FRAME 0x04 +#define UARTn_FRAME_DATABITS__MASK 0x000f +#define UARTn_FRAME_DATABITS(n) ((n) - 3) +#define UARTn_FRAME_PARITY__MASK 0x0300 +#define UARTn_FRAME_PARITY_NONE 0x0000 +#define UARTn_FRAME_PARITY_EVEN 0x0200 +#define UARTn_FRAME_PARITY_ODD 0x0300 +#define UARTn_FRAME_STOPBITS_HALF 0x0000 +#define UARTn_FRAME_STOPBITS_ONE 0x1000 +#define UARTn_FRAME_STOPBITS_TWO 0x3000 + +#define UARTn_CMD 0x0c +#define UARTn_CMD_RXEN 0x0001 +#define UARTn_CMD_RXDIS 0x0002 +#define UARTn_CMD_TXEN 0x0004 +#define UARTn_CMD_TXDIS 0x0008 + +#define UARTn_STATUS 0x10 +#define UARTn_STATUS_TXENS 0x0002 +#define UARTn_STATUS_TXC 0x0020 +#define UARTn_STATUS_TXBL 0x0040 +#define UARTn_STATUS_RXDATAV 0x0080 + +#define UARTn_CLKDIV 0x14 + +#define UARTn_RXDATAX 0x18 +#define UARTn_RXDATAX_RXDATA__MASK 0x01ff +#define UARTn_RXDATAX_PERR 0x4000 +#define UARTn_RXDATAX_FERR 0x8000 +/* + * This is a software only flag used for ignore_status_mask and + * read_status_mask! It's used for breaks that the hardware doesn't report + * explicitly. + */ +#define SW_UARTn_RXDATAX_BERR 0x2000 + +#define UARTn_TXDATA 0x34 + +#define UARTn_IF 0x40 +#define UARTn_IF_TXC 0x0001 +#define UARTn_IF_TXBL 0x0002 +#define UARTn_IF_RXDATAV 0x0004 +#define UARTn_IF_RXOF 0x0010 + +#define UARTn_IFS 0x44 +#define UARTn_IFC 0x48 +#define UARTn_IEN 0x4c + +#define UARTn_ROUTE 0x54 +#define UARTn_ROUTE_LOCATION__MASK 0x0700 +#define UARTn_ROUTE_LOCATION(n) (((n) << 8) & UARTn_ROUTE_LOCATION__MASK) +#define UARTn_ROUTE_RXPEN 0x0001 +#define UARTn_ROUTE_TXPEN 0x0002 + +struct efm32_uart_port { + struct uart_port port; + unsigned int txirq; + struct clk *clk; + struct efm32_uart_pdata pdata; +}; +#define to_efm_port(_port) container_of(_port, struct efm32_uart_port, port) +#define efm_debug(efm_port, format, arg...) \ + dev_dbg(efm_port->port.dev, format, ##arg) + +static void efm32_uart_write32(struct efm32_uart_port *efm_port, + u32 value, unsigned offset) +{ + writel_relaxed(value, efm_port->port.membase + offset); +} + +static u32 efm32_uart_read32(struct efm32_uart_port *efm_port, + unsigned offset) +{ + return readl_relaxed(efm_port->port.membase + offset); +} + +static unsigned int efm32_uart_tx_empty(struct uart_port *port) +{ + struct efm32_uart_port *efm_port = to_efm_port(port); + u32 status = efm32_uart_read32(efm_port, UARTn_STATUS); + + if (status & UARTn_STATUS_TXC) + return TIOCSER_TEMT; + else + return 0; +} + +static void efm32_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + /* sorry, neither handshaking lines nor loop functionallity */ +} + +static unsigned int efm32_uart_get_mctrl(struct uart_port *port) +{ + /* sorry, no handshaking lines available */ + return TIOCM_CAR | TIOCM_CTS | TIOCM_DSR; +} + +static void efm32_uart_stop_tx(struct uart_port *port) +{ + struct efm32_uart_port *efm_port = to_efm_port(port); + u32 ien = efm32_uart_read32(efm_port, UARTn_IEN); + + efm32_uart_write32(efm_port, UARTn_CMD_TXDIS, UARTn_CMD); + ien &= ~(UARTn_IF_TXC | UARTn_IF_TXBL); + efm32_uart_write32(efm_port, ien, UARTn_IEN); +} + +static void efm32_uart_tx_chars(struct efm32_uart_port *efm_port) +{ + struct uart_port *port = &efm_port->port; + struct circ_buf *xmit = &port->state->xmit; + + while (efm32_uart_read32(efm_port, UARTn_STATUS) & + UARTn_STATUS_TXBL) { + if (port->x_char) { + port->icount.tx++; + efm32_uart_write32(efm_port, port->x_char, + UARTn_TXDATA); + port->x_char = 0; + continue; + } + if (!uart_circ_empty(xmit) && !uart_tx_stopped(port)) { + port->icount.tx++; + efm32_uart_write32(efm_port, xmit->buf[xmit->tail], + UARTn_TXDATA); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + } else + break; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (!port->x_char && uart_circ_empty(xmit) && + efm32_uart_read32(efm_port, UARTn_STATUS) & + UARTn_STATUS_TXC) + efm32_uart_stop_tx(port); +} + +static void efm32_uart_start_tx(struct uart_port *port) +{ + struct efm32_uart_port *efm_port = to_efm_port(port); + u32 ien; + + efm32_uart_write32(efm_port, + UARTn_IF_TXBL | UARTn_IF_TXC, UARTn_IFC); + ien = efm32_uart_read32(efm_port, UARTn_IEN); + efm32_uart_write32(efm_port, + ien | UARTn_IF_TXBL | UARTn_IF_TXC, UARTn_IEN); + efm32_uart_write32(efm_port, UARTn_CMD_TXEN, UARTn_CMD); + + efm32_uart_tx_chars(efm_port); +} + +static void efm32_uart_stop_rx(struct uart_port *port) +{ + struct efm32_uart_port *efm_port = to_efm_port(port); + + efm32_uart_write32(efm_port, UARTn_CMD_RXDIS, UARTn_CMD); +} + +static void efm32_uart_break_ctl(struct uart_port *port, int ctl) +{ + /* not possible without fiddling with gpios */ +} + +static void efm32_uart_rx_chars(struct efm32_uart_port *efm_port) +{ + struct uart_port *port = &efm_port->port; + + while (efm32_uart_read32(efm_port, UARTn_STATUS) & + UARTn_STATUS_RXDATAV) { + u32 rxdata = efm32_uart_read32(efm_port, UARTn_RXDATAX); + int flag = 0; + + /* + * This is a reserved bit and I only saw it read as 0. But to be + * sure not to be confused too much by new devices adhere to the + * warning in the reference manual that reserved bits might + * read as 1 in the future. + */ + rxdata &= ~SW_UARTn_RXDATAX_BERR; + + port->icount.rx++; + + if ((rxdata & UARTn_RXDATAX_FERR) && + !(rxdata & UARTn_RXDATAX_RXDATA__MASK)) { + rxdata |= SW_UARTn_RXDATAX_BERR; + port->icount.brk++; + if (uart_handle_break(port)) + continue; + } else if (rxdata & UARTn_RXDATAX_PERR) + port->icount.parity++; + else if (rxdata & UARTn_RXDATAX_FERR) + port->icount.frame++; + + rxdata &= port->read_status_mask; + + if (rxdata & SW_UARTn_RXDATAX_BERR) + flag = TTY_BREAK; + else if (rxdata & UARTn_RXDATAX_PERR) + flag = TTY_PARITY; + else if (rxdata & UARTn_RXDATAX_FERR) + flag = TTY_FRAME; + else if (uart_handle_sysrq_char(port, + rxdata & UARTn_RXDATAX_RXDATA__MASK)) + continue; + + if ((rxdata & port->ignore_status_mask) == 0) + tty_insert_flip_char(&port->state->port, + rxdata & UARTn_RXDATAX_RXDATA__MASK, flag); + } +} + +static irqreturn_t efm32_uart_rxirq(int irq, void *data) +{ + struct efm32_uart_port *efm_port = data; + u32 irqflag = efm32_uart_read32(efm_port, UARTn_IF); + int handled = IRQ_NONE; + struct uart_port *port = &efm_port->port; + struct tty_port *tport = &port->state->port; + + spin_lock(&port->lock); + + if (irqflag & UARTn_IF_RXDATAV) { + efm32_uart_write32(efm_port, UARTn_IF_RXDATAV, UARTn_IFC); + efm32_uart_rx_chars(efm_port); + + handled = IRQ_HANDLED; + } + + if (irqflag & UARTn_IF_RXOF) { + efm32_uart_write32(efm_port, UARTn_IF_RXOF, UARTn_IFC); + port->icount.overrun++; + tty_insert_flip_char(tport, 0, TTY_OVERRUN); + + handled = IRQ_HANDLED; + } + + spin_unlock(&port->lock); + + tty_flip_buffer_push(tport); + + return handled; +} + +static irqreturn_t efm32_uart_txirq(int irq, void *data) +{ + struct efm32_uart_port *efm_port = data; + u32 irqflag = efm32_uart_read32(efm_port, UARTn_IF); + + /* TXBL doesn't need to be cleared */ + if (irqflag & UARTn_IF_TXC) + efm32_uart_write32(efm_port, UARTn_IF_TXC, UARTn_IFC); + + if (irqflag & (UARTn_IF_TXC | UARTn_IF_TXBL)) { + efm32_uart_tx_chars(efm_port); + return IRQ_HANDLED; + } else + return IRQ_NONE; +} + +static int efm32_uart_startup(struct uart_port *port) +{ + struct efm32_uart_port *efm_port = to_efm_port(port); + int ret; + + ret = clk_enable(efm_port->clk); + if (ret) { + efm_debug(efm_port, "failed to enable clk\n"); + goto err_clk_enable; + } + port->uartclk = clk_get_rate(efm_port->clk); + + /* Enable pins at configured location */ + efm32_uart_write32(efm_port, + UARTn_ROUTE_LOCATION(efm_port->pdata.location) | + UARTn_ROUTE_RXPEN | UARTn_ROUTE_TXPEN, + UARTn_ROUTE); + + ret = request_irq(port->irq, efm32_uart_rxirq, 0, + DRIVER_NAME, efm_port); + if (ret) { + efm_debug(efm_port, "failed to register rxirq\n"); + goto err_request_irq_rx; + } + + /* disable all irqs */ + efm32_uart_write32(efm_port, 0, UARTn_IEN); + + ret = request_irq(efm_port->txirq, efm32_uart_txirq, 0, + DRIVER_NAME, efm_port); + if (ret) { + efm_debug(efm_port, "failed to register txirq\n"); + free_irq(port->irq, efm_port); +err_request_irq_rx: + + clk_disable(efm_port->clk); + } else { + efm32_uart_write32(efm_port, + UARTn_IF_RXDATAV | UARTn_IF_RXOF, UARTn_IEN); + efm32_uart_write32(efm_port, UARTn_CMD_RXEN, UARTn_CMD); + } + +err_clk_enable: + return ret; +} + +static void efm32_uart_shutdown(struct uart_port *port) +{ + struct efm32_uart_port *efm_port = to_efm_port(port); + + efm32_uart_write32(efm_port, 0, UARTn_IEN); + free_irq(port->irq, efm_port); + + clk_disable(efm_port->clk); +} + +static void efm32_uart_set_termios(struct uart_port *port, + struct ktermios *new, struct ktermios *old) +{ + struct efm32_uart_port *efm_port = to_efm_port(port); + unsigned long flags; + unsigned baud; + u32 clkdiv; + u32 frame = 0; + + /* no modem control lines */ + new->c_cflag &= ~(CRTSCTS | CMSPAR); + + baud = uart_get_baud_rate(port, new, old, + DIV_ROUND_CLOSEST(port->uartclk, 16 * 8192), + DIV_ROUND_CLOSEST(port->uartclk, 16)); + + switch (new->c_cflag & CSIZE) { + case CS5: + frame |= UARTn_FRAME_DATABITS(5); + break; + case CS6: + frame |= UARTn_FRAME_DATABITS(6); + break; + case CS7: + frame |= UARTn_FRAME_DATABITS(7); + break; + case CS8: + frame |= UARTn_FRAME_DATABITS(8); + break; + } + + if (new->c_cflag & CSTOPB) + /* the receiver only verifies the first stop bit */ + frame |= UARTn_FRAME_STOPBITS_TWO; + else + frame |= UARTn_FRAME_STOPBITS_ONE; + + if (new->c_cflag & PARENB) { + if (new->c_cflag & PARODD) + frame |= UARTn_FRAME_PARITY_ODD; + else + frame |= UARTn_FRAME_PARITY_EVEN; + } else + frame |= UARTn_FRAME_PARITY_NONE; + + /* + * the 6 lowest bits of CLKDIV are dc, bit 6 has value 0.25. + * port->uartclk <= 14e6, so 4 * port->uartclk doesn't overflow. + */ + clkdiv = (DIV_ROUND_CLOSEST(4 * port->uartclk, 16 * baud) - 4) << 6; + + spin_lock_irqsave(&port->lock, flags); + + efm32_uart_write32(efm_port, + UARTn_CMD_TXDIS | UARTn_CMD_RXDIS, UARTn_CMD); + + port->read_status_mask = UARTn_RXDATAX_RXDATA__MASK; + if (new->c_iflag & INPCK) + port->read_status_mask |= + UARTn_RXDATAX_FERR | UARTn_RXDATAX_PERR; + if (new->c_iflag & (IGNBRK | BRKINT | PARMRK)) + port->read_status_mask |= SW_UARTn_RXDATAX_BERR; + + port->ignore_status_mask = 0; + if (new->c_iflag & IGNPAR) + port->ignore_status_mask |= + UARTn_RXDATAX_FERR | UARTn_RXDATAX_PERR; + if (new->c_iflag & IGNBRK) + port->ignore_status_mask |= SW_UARTn_RXDATAX_BERR; + + uart_update_timeout(port, new->c_cflag, baud); + + efm32_uart_write32(efm_port, UARTn_CTRL_TXBIL, UARTn_CTRL); + efm32_uart_write32(efm_port, frame, UARTn_FRAME); + efm32_uart_write32(efm_port, clkdiv, UARTn_CLKDIV); + + efm32_uart_write32(efm_port, UARTn_CMD_TXEN | UARTn_CMD_RXEN, + UARTn_CMD); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *efm32_uart_type(struct uart_port *port) +{ + return port->type == PORT_EFMUART ? "efm32-uart" : NULL; +} + +static void efm32_uart_release_port(struct uart_port *port) +{ + struct efm32_uart_port *efm_port = to_efm_port(port); + + clk_unprepare(efm_port->clk); + clk_put(efm_port->clk); + iounmap(port->membase); +} + +static int efm32_uart_request_port(struct uart_port *port) +{ + struct efm32_uart_port *efm_port = to_efm_port(port); + int ret; + + port->membase = ioremap(port->mapbase, 60); + if (!efm_port->port.membase) { + ret = -ENOMEM; + efm_debug(efm_port, "failed to remap\n"); + goto err_ioremap; + } + + efm_port->clk = clk_get(port->dev, NULL); + if (IS_ERR(efm_port->clk)) { + ret = PTR_ERR(efm_port->clk); + efm_debug(efm_port, "failed to get clock\n"); + goto err_clk_get; + } + + ret = clk_prepare(efm_port->clk); + if (ret) { + clk_put(efm_port->clk); +err_clk_get: + + iounmap(port->membase); +err_ioremap: + return ret; + } + return 0; +} + +static void efm32_uart_config_port(struct uart_port *port, int type) +{ + if (type & UART_CONFIG_TYPE && + !efm32_uart_request_port(port)) + port->type = PORT_EFMUART; +} + +static int efm32_uart_verify_port(struct uart_port *port, + struct serial_struct *serinfo) +{ + int ret = 0; + + if (serinfo->type != PORT_UNKNOWN && serinfo->type != PORT_EFMUART) + ret = -EINVAL; + + return ret; +} + +static const struct uart_ops efm32_uart_pops = { + .tx_empty = efm32_uart_tx_empty, + .set_mctrl = efm32_uart_set_mctrl, + .get_mctrl = efm32_uart_get_mctrl, + .stop_tx = efm32_uart_stop_tx, + .start_tx = efm32_uart_start_tx, + .stop_rx = efm32_uart_stop_rx, + .break_ctl = efm32_uart_break_ctl, + .startup = efm32_uart_startup, + .shutdown = efm32_uart_shutdown, + .set_termios = efm32_uart_set_termios, + .type = efm32_uart_type, + .release_port = efm32_uart_release_port, + .request_port = efm32_uart_request_port, + .config_port = efm32_uart_config_port, + .verify_port = efm32_uart_verify_port, +}; + +static struct efm32_uart_port *efm32_uart_ports[5]; + +#ifdef CONFIG_SERIAL_EFM32_UART_CONSOLE +static void efm32_uart_console_putchar(struct uart_port *port, int ch) +{ + struct efm32_uart_port *efm_port = to_efm_port(port); + unsigned int timeout = 0x400; + u32 status; + + while (1) { + status = efm32_uart_read32(efm_port, UARTn_STATUS); + + if (status & UARTn_STATUS_TXBL) + break; + if (!timeout--) + return; + } + efm32_uart_write32(efm_port, ch, UARTn_TXDATA); +} + +static void efm32_uart_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct efm32_uart_port *efm_port = efm32_uart_ports[co->index]; + u32 status = efm32_uart_read32(efm_port, UARTn_STATUS); + unsigned int timeout = 0x400; + + if (!(status & UARTn_STATUS_TXENS)) + efm32_uart_write32(efm_port, UARTn_CMD_TXEN, UARTn_CMD); + + uart_console_write(&efm_port->port, s, count, + efm32_uart_console_putchar); + + /* Wait for the transmitter to become empty */ + while (1) { + u32 status = efm32_uart_read32(efm_port, UARTn_STATUS); + if (status & UARTn_STATUS_TXC) + break; + if (!timeout--) + break; + } + + if (!(status & UARTn_STATUS_TXENS)) + efm32_uart_write32(efm_port, UARTn_CMD_TXDIS, UARTn_CMD); +} + +static void efm32_uart_console_get_options(struct efm32_uart_port *efm_port, + int *baud, int *parity, int *bits) +{ + u32 ctrl = efm32_uart_read32(efm_port, UARTn_CTRL); + u32 route, clkdiv, frame; + + if (ctrl & UARTn_CTRL_SYNC) + /* not operating in async mode */ + return; + + route = efm32_uart_read32(efm_port, UARTn_ROUTE); + if (!(route & UARTn_ROUTE_TXPEN)) + /* tx pin not routed */ + return; + + clkdiv = efm32_uart_read32(efm_port, UARTn_CLKDIV); + + *baud = DIV_ROUND_CLOSEST(4 * efm_port->port.uartclk, + 16 * (4 + (clkdiv >> 6))); + + frame = efm32_uart_read32(efm_port, UARTn_FRAME); + switch (frame & UARTn_FRAME_PARITY__MASK) { + case UARTn_FRAME_PARITY_ODD: + *parity = 'o'; + break; + case UARTn_FRAME_PARITY_EVEN: + *parity = 'e'; + break; + default: + *parity = 'n'; + } + + *bits = (frame & UARTn_FRAME_DATABITS__MASK) - + UARTn_FRAME_DATABITS(4) + 4; + + efm_debug(efm_port, "get_opts: options=%d%c%d\n", + *baud, *parity, *bits); +} + +static int efm32_uart_console_setup(struct console *co, char *options) +{ + struct efm32_uart_port *efm_port; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + int ret; + + if (co->index < 0 || co->index >= ARRAY_SIZE(efm32_uart_ports)) { + unsigned i; + for (i = 0; i < ARRAY_SIZE(efm32_uart_ports); ++i) { + if (efm32_uart_ports[i]) { + pr_warn("efm32-console: fall back to console index %u (from %hhi)\n", + i, co->index); + co->index = i; + break; + } + } + } + + efm_port = efm32_uart_ports[co->index]; + if (!efm_port) { + pr_warn("efm32-console: No port at %d\n", co->index); + return -ENODEV; + } + + ret = clk_prepare(efm_port->clk); + if (ret) { + dev_warn(efm_port->port.dev, + "console: clk_prepare failed: %d\n", ret); + return ret; + } + + efm_port->port.uartclk = clk_get_rate(efm_port->clk); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + efm32_uart_console_get_options(efm_port, + &baud, &parity, &bits); + + return uart_set_options(&efm_port->port, co, baud, parity, bits, flow); +} + +static struct uart_driver efm32_uart_reg; + +static struct console efm32_uart_console = { + .name = DEV_NAME, + .write = efm32_uart_console_write, + .device = uart_console_device, + .setup = efm32_uart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &efm32_uart_reg, +}; + +#else +#define efm32_uart_console (*(struct console *)NULL) +#endif /* ifdef CONFIG_SERIAL_EFM32_UART_CONSOLE / else */ + +static struct uart_driver efm32_uart_reg = { + .owner = THIS_MODULE, + .driver_name = DRIVER_NAME, + .dev_name = DEV_NAME, + .nr = ARRAY_SIZE(efm32_uart_ports), + .cons = &efm32_uart_console, +}; + +static int efm32_uart_probe_dt(struct platform_device *pdev, + struct efm32_uart_port *efm_port) +{ + struct device_node *np = pdev->dev.of_node; + u32 location; + int ret; + + if (!np) + return 1; + + ret = of_property_read_u32(np, "energymicro,location", &location); + + if (ret) + /* fall back to wrongly namespaced property */ + ret = of_property_read_u32(np, "efm32,location", &location); + + if (ret) + /* fall back to old and (wrongly) generic property "location" */ + ret = of_property_read_u32(np, "location", &location); + + if (!ret) { + if (location > 5) { + dev_err(&pdev->dev, "invalid location\n"); + return -EINVAL; + } + efm_debug(efm_port, "using location %u\n", location); + efm_port->pdata.location = location; + } else { + efm_debug(efm_port, "fall back to location 0\n"); + } + + ret = of_alias_get_id(np, "serial"); + if (ret < 0) { + dev_err(&pdev->dev, "failed to get alias id: %d\n", ret); + return ret; + } else { + efm_port->port.line = ret; + return 0; + } + +} + +static int efm32_uart_probe(struct platform_device *pdev) +{ + struct efm32_uart_port *efm_port; + struct resource *res; + unsigned int line; + int ret; + + efm_port = kzalloc(sizeof(*efm_port), GFP_KERNEL); + if (!efm_port) { + dev_dbg(&pdev->dev, "failed to allocate private data\n"); + return -ENOMEM; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + ret = -ENODEV; + dev_dbg(&pdev->dev, "failed to determine base address\n"); + goto err_get_base; + } + + if (resource_size(res) < 60) { + ret = -EINVAL; + dev_dbg(&pdev->dev, "memory resource too small\n"); + goto err_too_small; + } + + ret = platform_get_irq(pdev, 0); + if (ret <= 0) { + dev_dbg(&pdev->dev, "failed to get rx irq\n"); + goto err_get_rxirq; + } + + efm_port->port.irq = ret; + + ret = platform_get_irq(pdev, 1); + if (ret <= 0) + ret = efm_port->port.irq + 1; + + efm_port->txirq = ret; + + efm_port->port.dev = &pdev->dev; + efm_port->port.mapbase = res->start; + efm_port->port.type = PORT_EFMUART; + efm_port->port.iotype = UPIO_MEM32; + efm_port->port.fifosize = 2; + efm_port->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_EFM32_UART_CONSOLE); + efm_port->port.ops = &efm32_uart_pops; + efm_port->port.flags = UPF_BOOT_AUTOCONF; + + ret = efm32_uart_probe_dt(pdev, efm_port); + if (ret > 0) { + /* not created by device tree */ + const struct efm32_uart_pdata *pdata = dev_get_platdata(&pdev->dev); + + efm_port->port.line = pdev->id; + + if (pdata) + efm_port->pdata = *pdata; + } else if (ret < 0) + goto err_probe_dt; + + line = efm_port->port.line; + + if (line >= 0 && line < ARRAY_SIZE(efm32_uart_ports)) + efm32_uart_ports[line] = efm_port; + + ret = uart_add_one_port(&efm32_uart_reg, &efm_port->port); + if (ret) { + dev_dbg(&pdev->dev, "failed to add port: %d\n", ret); + + if (line >= 0 && line < ARRAY_SIZE(efm32_uart_ports)) + efm32_uart_ports[line] = NULL; +err_probe_dt: +err_get_rxirq: +err_too_small: +err_get_base: + kfree(efm_port); + } else { + platform_set_drvdata(pdev, efm_port); + dev_dbg(&pdev->dev, "\\o/\n"); + } + + return ret; +} + +static int efm32_uart_remove(struct platform_device *pdev) +{ + struct efm32_uart_port *efm_port = platform_get_drvdata(pdev); + unsigned int line = efm_port->port.line; + + uart_remove_one_port(&efm32_uart_reg, &efm_port->port); + + if (line >= 0 && line < ARRAY_SIZE(efm32_uart_ports)) + efm32_uart_ports[line] = NULL; + + kfree(efm_port); + + return 0; +} + +static const struct of_device_id efm32_uart_dt_ids[] = { + { + .compatible = "energymicro,efm32-uart", + }, { + /* doesn't follow the "vendor,device" scheme, don't use */ + .compatible = "efm32,uart", + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(of, efm32_uart_dt_ids); + +static struct platform_driver efm32_uart_driver = { + .probe = efm32_uart_probe, + .remove = efm32_uart_remove, + + .driver = { + .name = DRIVER_NAME, + .of_match_table = efm32_uart_dt_ids, + }, +}; + +static int __init efm32_uart_init(void) +{ + int ret; + + ret = uart_register_driver(&efm32_uart_reg); + if (ret) + return ret; + + ret = platform_driver_register(&efm32_uart_driver); + if (ret) + uart_unregister_driver(&efm32_uart_reg); + + pr_info("EFM32 UART/USART driver\n"); + + return ret; +} +module_init(efm32_uart_init); + +static void __exit efm32_uart_exit(void) +{ + platform_driver_unregister(&efm32_uart_driver); + uart_unregister_driver(&efm32_uart_reg); +} +module_exit(efm32_uart_exit); + +MODULE_AUTHOR("Uwe Kleine-Koenig "); +MODULE_DESCRIPTION("EFM32 UART/USART driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/drivers/tty/serial/fsl_linflexuart.c b/drivers/tty/serial/fsl_linflexuart.c new file mode 100644 index 000000000..3e28be402 --- /dev/null +++ b/drivers/tty/serial/fsl_linflexuart.c @@ -0,0 +1,938 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Freescale LINFlexD UART serial port driver + * + * Copyright 2012-2016 Freescale Semiconductor, Inc. + * Copyright 2017-2019 NXP + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* All registers are 32-bit width */ + +#define LINCR1 0x0000 /* LIN control register */ +#define LINIER 0x0004 /* LIN interrupt enable register */ +#define LINSR 0x0008 /* LIN status register */ +#define LINESR 0x000C /* LIN error status register */ +#define UARTCR 0x0010 /* UART mode control register */ +#define UARTSR 0x0014 /* UART mode status register */ +#define LINTCSR 0x0018 /* LIN timeout control status register */ +#define LINOCR 0x001C /* LIN output compare register */ +#define LINTOCR 0x0020 /* LIN timeout control register */ +#define LINFBRR 0x0024 /* LIN fractional baud rate register */ +#define LINIBRR 0x0028 /* LIN integer baud rate register */ +#define LINCFR 0x002C /* LIN checksum field register */ +#define LINCR2 0x0030 /* LIN control register 2 */ +#define BIDR 0x0034 /* Buffer identifier register */ +#define BDRL 0x0038 /* Buffer data register least significant */ +#define BDRM 0x003C /* Buffer data register most significant */ +#define IFER 0x0040 /* Identifier filter enable register */ +#define IFMI 0x0044 /* Identifier filter match index */ +#define IFMR 0x0048 /* Identifier filter mode register */ +#define GCR 0x004C /* Global control register */ +#define UARTPTO 0x0050 /* UART preset timeout register */ +#define UARTCTO 0x0054 /* UART current timeout register */ + +/* + * Register field definitions + */ + +#define LINFLEXD_LINCR1_INIT BIT(0) +#define LINFLEXD_LINCR1_MME BIT(4) +#define LINFLEXD_LINCR1_BF BIT(7) + +#define LINFLEXD_LINSR_LINS_INITMODE BIT(12) +#define LINFLEXD_LINSR_LINS_MASK (0xF << 12) + +#define LINFLEXD_LINIER_SZIE BIT(15) +#define LINFLEXD_LINIER_OCIE BIT(14) +#define LINFLEXD_LINIER_BEIE BIT(13) +#define LINFLEXD_LINIER_CEIE BIT(12) +#define LINFLEXD_LINIER_HEIE BIT(11) +#define LINFLEXD_LINIER_FEIE BIT(8) +#define LINFLEXD_LINIER_BOIE BIT(7) +#define LINFLEXD_LINIER_LSIE BIT(6) +#define LINFLEXD_LINIER_WUIE BIT(5) +#define LINFLEXD_LINIER_DBFIE BIT(4) +#define LINFLEXD_LINIER_DBEIETOIE BIT(3) +#define LINFLEXD_LINIER_DRIE BIT(2) +#define LINFLEXD_LINIER_DTIE BIT(1) +#define LINFLEXD_LINIER_HRIE BIT(0) + +#define LINFLEXD_UARTCR_OSR_MASK (0xF << 24) +#define LINFLEXD_UARTCR_OSR(uartcr) (((uartcr) \ + & LINFLEXD_UARTCR_OSR_MASK) >> 24) + +#define LINFLEXD_UARTCR_ROSE BIT(23) + +#define LINFLEXD_UARTCR_RFBM BIT(9) +#define LINFLEXD_UARTCR_TFBM BIT(8) +#define LINFLEXD_UARTCR_WL1 BIT(7) +#define LINFLEXD_UARTCR_PC1 BIT(6) + +#define LINFLEXD_UARTCR_RXEN BIT(5) +#define LINFLEXD_UARTCR_TXEN BIT(4) +#define LINFLEXD_UARTCR_PC0 BIT(3) + +#define LINFLEXD_UARTCR_PCE BIT(2) +#define LINFLEXD_UARTCR_WL0 BIT(1) +#define LINFLEXD_UARTCR_UART BIT(0) + +#define LINFLEXD_UARTSR_SZF BIT(15) +#define LINFLEXD_UARTSR_OCF BIT(14) +#define LINFLEXD_UARTSR_PE3 BIT(13) +#define LINFLEXD_UARTSR_PE2 BIT(12) +#define LINFLEXD_UARTSR_PE1 BIT(11) +#define LINFLEXD_UARTSR_PE0 BIT(10) +#define LINFLEXD_UARTSR_RMB BIT(9) +#define LINFLEXD_UARTSR_FEF BIT(8) +#define LINFLEXD_UARTSR_BOF BIT(7) +#define LINFLEXD_UARTSR_RPS BIT(6) +#define LINFLEXD_UARTSR_WUF BIT(5) +#define LINFLEXD_UARTSR_4 BIT(4) + +#define LINFLEXD_UARTSR_TO BIT(3) + +#define LINFLEXD_UARTSR_DRFRFE BIT(2) +#define LINFLEXD_UARTSR_DTFTFF BIT(1) +#define LINFLEXD_UARTSR_NF BIT(0) +#define LINFLEXD_UARTSR_PE (LINFLEXD_UARTSR_PE0 |\ + LINFLEXD_UARTSR_PE1 |\ + LINFLEXD_UARTSR_PE2 |\ + LINFLEXD_UARTSR_PE3) + +#define LINFLEX_LDIV_MULTIPLIER (16) + +#define DRIVER_NAME "fsl-linflexuart" +#define DEV_NAME "ttyLF" +#define UART_NR 4 + +#define EARLYCON_BUFFER_INITIAL_CAP 8 + +#define PREINIT_DELAY 2000 /* us */ + +static const struct of_device_id linflex_dt_ids[] = { + { + .compatible = "fsl,s32v234-linflexuart", + }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, linflex_dt_ids); + +#ifdef CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE +static struct uart_port *earlycon_port; +static bool linflex_earlycon_same_instance; +static DEFINE_SPINLOCK(init_lock); +static bool during_init; + +static struct { + char *content; + unsigned int len, cap; +} earlycon_buf; +#endif + +static void linflex_stop_tx(struct uart_port *port) +{ + unsigned long ier; + + ier = readl(port->membase + LINIER); + ier &= ~(LINFLEXD_LINIER_DTIE); + writel(ier, port->membase + LINIER); +} + +static void linflex_stop_rx(struct uart_port *port) +{ + unsigned long ier; + + ier = readl(port->membase + LINIER); + writel(ier & ~LINFLEXD_LINIER_DRIE, port->membase + LINIER); +} + +static inline void linflex_transmit_buffer(struct uart_port *sport) +{ + struct circ_buf *xmit = &sport->state->xmit; + unsigned char c; + unsigned long status; + + while (!uart_circ_empty(xmit)) { + c = xmit->buf[xmit->tail]; + writeb(c, sport->membase + BDRL); + + /* Waiting for data transmission completed. */ + while (((status = readl(sport->membase + UARTSR)) & + LINFLEXD_UARTSR_DTFTFF) != + LINFLEXD_UARTSR_DTFTFF) + ; + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + sport->icount.tx++; + + writel(status | LINFLEXD_UARTSR_DTFTFF, + sport->membase + UARTSR); + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(sport); + + if (uart_circ_empty(xmit)) + linflex_stop_tx(sport); +} + +static void linflex_start_tx(struct uart_port *port) +{ + unsigned long ier; + + linflex_transmit_buffer(port); + ier = readl(port->membase + LINIER); + writel(ier | LINFLEXD_LINIER_DTIE, port->membase + LINIER); +} + +static irqreturn_t linflex_txint(int irq, void *dev_id) +{ + struct uart_port *sport = dev_id; + struct circ_buf *xmit = &sport->state->xmit; + unsigned long flags; + unsigned long status; + + spin_lock_irqsave(&sport->lock, flags); + + if (sport->x_char) { + writeb(sport->x_char, sport->membase + BDRL); + + /* waiting for data transmission completed */ + while (((status = readl(sport->membase + UARTSR)) & + LINFLEXD_UARTSR_DTFTFF) != LINFLEXD_UARTSR_DTFTFF) + ; + + writel(status | LINFLEXD_UARTSR_DTFTFF, + sport->membase + UARTSR); + + goto out; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(sport)) { + linflex_stop_tx(sport); + goto out; + } + + linflex_transmit_buffer(sport); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(sport); + +out: + spin_unlock_irqrestore(&sport->lock, flags); + return IRQ_HANDLED; +} + +static irqreturn_t linflex_rxint(int irq, void *dev_id) +{ + struct uart_port *sport = dev_id; + unsigned int flg; + struct tty_port *port = &sport->state->port; + unsigned long flags, status; + unsigned char rx; + bool brk; + + spin_lock_irqsave(&sport->lock, flags); + + status = readl(sport->membase + UARTSR); + while (status & LINFLEXD_UARTSR_RMB) { + rx = readb(sport->membase + BDRM); + brk = false; + flg = TTY_NORMAL; + sport->icount.rx++; + + if (status & (LINFLEXD_UARTSR_BOF | LINFLEXD_UARTSR_SZF | + LINFLEXD_UARTSR_FEF | LINFLEXD_UARTSR_PE)) { + if (status & LINFLEXD_UARTSR_SZF) + status |= LINFLEXD_UARTSR_SZF; + if (status & LINFLEXD_UARTSR_BOF) + status |= LINFLEXD_UARTSR_BOF; + if (status & LINFLEXD_UARTSR_FEF) { + if (!rx) + brk = true; + status |= LINFLEXD_UARTSR_FEF; + } + if (status & LINFLEXD_UARTSR_PE) + status |= LINFLEXD_UARTSR_PE; + } + + writel(status | LINFLEXD_UARTSR_RMB | LINFLEXD_UARTSR_DRFRFE, + sport->membase + UARTSR); + status = readl(sport->membase + UARTSR); + + if (brk) { + uart_handle_break(sport); + } else { + if (uart_handle_sysrq_char(sport, (unsigned char)rx)) + continue; + tty_insert_flip_char(port, rx, flg); + } + } + + spin_unlock_irqrestore(&sport->lock, flags); + + tty_flip_buffer_push(port); + + return IRQ_HANDLED; +} + +static irqreturn_t linflex_int(int irq, void *dev_id) +{ + struct uart_port *sport = dev_id; + unsigned long status; + + status = readl(sport->membase + UARTSR); + + if (status & LINFLEXD_UARTSR_DRFRFE) + linflex_rxint(irq, dev_id); + if (status & LINFLEXD_UARTSR_DTFTFF) + linflex_txint(irq, dev_id); + + return IRQ_HANDLED; +} + +/* return TIOCSER_TEMT when transmitter is not busy */ +static unsigned int linflex_tx_empty(struct uart_port *port) +{ + unsigned long status; + + status = readl(port->membase + UARTSR) & LINFLEXD_UARTSR_DTFTFF; + + return status ? TIOCSER_TEMT : 0; +} + +static unsigned int linflex_get_mctrl(struct uart_port *port) +{ + return 0; +} + +static void linflex_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} + +static void linflex_break_ctl(struct uart_port *port, int break_state) +{ +} + +static void linflex_setup_watermark(struct uart_port *sport) +{ + unsigned long cr, ier, cr1; + + /* Disable transmission/reception */ + ier = readl(sport->membase + LINIER); + ier &= ~(LINFLEXD_LINIER_DRIE | LINFLEXD_LINIER_DTIE); + writel(ier, sport->membase + LINIER); + + cr = readl(sport->membase + UARTCR); + cr &= ~(LINFLEXD_UARTCR_RXEN | LINFLEXD_UARTCR_TXEN); + writel(cr, sport->membase + UARTCR); + + /* Enter initialization mode by setting INIT bit */ + + /* set the Linflex in master mode and activate by-pass filter */ + cr1 = LINFLEXD_LINCR1_BF | LINFLEXD_LINCR1_MME + | LINFLEXD_LINCR1_INIT; + writel(cr1, sport->membase + LINCR1); + + /* wait for init mode entry */ + while ((readl(sport->membase + LINSR) + & LINFLEXD_LINSR_LINS_MASK) + != LINFLEXD_LINSR_LINS_INITMODE) + ; + + /* + * UART = 0x1; - Linflex working in UART mode + * TXEN = 0x1; - Enable transmission of data now + * RXEn = 0x1; - Receiver enabled + * WL0 = 0x1; - 8 bit data + * PCE = 0x0; - No parity + */ + + /* set UART bit to allow writing other bits */ + writel(LINFLEXD_UARTCR_UART, sport->membase + UARTCR); + + cr = (LINFLEXD_UARTCR_RXEN | LINFLEXD_UARTCR_TXEN | + LINFLEXD_UARTCR_WL0 | LINFLEXD_UARTCR_UART); + + writel(cr, sport->membase + UARTCR); + + cr1 &= ~(LINFLEXD_LINCR1_INIT); + + writel(cr1, sport->membase + LINCR1); + + ier = readl(sport->membase + LINIER); + ier |= LINFLEXD_LINIER_DRIE; + ier |= LINFLEXD_LINIER_DTIE; + + writel(ier, sport->membase + LINIER); +} + +static int linflex_startup(struct uart_port *port) +{ + int ret = 0; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + linflex_setup_watermark(port); + + spin_unlock_irqrestore(&port->lock, flags); + + ret = devm_request_irq(port->dev, port->irq, linflex_int, 0, + DRIVER_NAME, port); + + return ret; +} + +static void linflex_shutdown(struct uart_port *port) +{ + unsigned long ier; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + /* disable interrupts */ + ier = readl(port->membase + LINIER); + ier &= ~(LINFLEXD_LINIER_DRIE | LINFLEXD_LINIER_DTIE); + writel(ier, port->membase + LINIER); + + spin_unlock_irqrestore(&port->lock, flags); + + devm_free_irq(port->dev, port->irq, port); +} + +static void +linflex_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + unsigned long flags; + unsigned long cr, old_cr, cr1; + unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; + + cr = readl(port->membase + UARTCR); + old_cr = cr; + + /* Enter initialization mode by setting INIT bit */ + cr1 = readl(port->membase + LINCR1); + cr1 |= LINFLEXD_LINCR1_INIT; + writel(cr1, port->membase + LINCR1); + + /* wait for init mode entry */ + while ((readl(port->membase + LINSR) + & LINFLEXD_LINSR_LINS_MASK) + != LINFLEXD_LINSR_LINS_INITMODE) + ; + + /* + * only support CS8 and CS7, and for CS7 must enable PE. + * supported mode: + * - (7,e/o,1) + * - (8,n,1) + * - (8,e/o,1) + */ + /* enter the UART into configuration mode */ + + while ((termios->c_cflag & CSIZE) != CS8 && + (termios->c_cflag & CSIZE) != CS7) { + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= old_csize; + old_csize = CS8; + } + + if ((termios->c_cflag & CSIZE) == CS7) { + /* Word length: WL1WL0:00 */ + cr = old_cr & ~LINFLEXD_UARTCR_WL1 & ~LINFLEXD_UARTCR_WL0; + } + + if ((termios->c_cflag & CSIZE) == CS8) { + /* Word length: WL1WL0:01 */ + cr = (old_cr | LINFLEXD_UARTCR_WL0) & ~LINFLEXD_UARTCR_WL1; + } + + if (termios->c_cflag & CMSPAR) { + if ((termios->c_cflag & CSIZE) != CS8) { + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= CS8; + } + /* has a space/sticky bit */ + cr |= LINFLEXD_UARTCR_WL0; + } + + if (termios->c_cflag & CSTOPB) + termios->c_cflag &= ~CSTOPB; + + /* parity must be enabled when CS7 to match 8-bits format */ + if ((termios->c_cflag & CSIZE) == CS7) + termios->c_cflag |= PARENB; + + if ((termios->c_cflag & PARENB)) { + cr |= LINFLEXD_UARTCR_PCE; + if (termios->c_cflag & PARODD) + cr = (cr | LINFLEXD_UARTCR_PC0) & + (~LINFLEXD_UARTCR_PC1); + else + cr = cr & (~LINFLEXD_UARTCR_PC1 & + ~LINFLEXD_UARTCR_PC0); + } else { + cr &= ~LINFLEXD_UARTCR_PCE; + } + + spin_lock_irqsave(&port->lock, flags); + + port->read_status_mask = 0; + + if (termios->c_iflag & INPCK) + port->read_status_mask |= (LINFLEXD_UARTSR_FEF | + LINFLEXD_UARTSR_PE0 | + LINFLEXD_UARTSR_PE1 | + LINFLEXD_UARTSR_PE2 | + LINFLEXD_UARTSR_PE3); + if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) + port->read_status_mask |= LINFLEXD_UARTSR_FEF; + + /* characters to ignore */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= LINFLEXD_UARTSR_PE; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= LINFLEXD_UARTSR_PE; + /* + * if we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= LINFLEXD_UARTSR_BOF; + } + + writel(cr, port->membase + UARTCR); + + cr1 &= ~(LINFLEXD_LINCR1_INIT); + + writel(cr1, port->membase + LINCR1); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *linflex_type(struct uart_port *port) +{ + return "FSL_LINFLEX"; +} + +static void linflex_release_port(struct uart_port *port) +{ + /* nothing to do */ +} + +static int linflex_request_port(struct uart_port *port) +{ + return 0; +} + +/* configure/auto-configure the port */ +static void linflex_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) + port->type = PORT_LINFLEXUART; +} + +static const struct uart_ops linflex_pops = { + .tx_empty = linflex_tx_empty, + .set_mctrl = linflex_set_mctrl, + .get_mctrl = linflex_get_mctrl, + .stop_tx = linflex_stop_tx, + .start_tx = linflex_start_tx, + .stop_rx = linflex_stop_rx, + .break_ctl = linflex_break_ctl, + .startup = linflex_startup, + .shutdown = linflex_shutdown, + .set_termios = linflex_set_termios, + .type = linflex_type, + .request_port = linflex_request_port, + .release_port = linflex_release_port, + .config_port = linflex_config_port, +}; + +static struct uart_port *linflex_ports[UART_NR]; + +#ifdef CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE +static void linflex_console_putchar(struct uart_port *port, int ch) +{ + unsigned long cr; + + cr = readl(port->membase + UARTCR); + + writeb(ch, port->membase + BDRL); + + if (!(cr & LINFLEXD_UARTCR_TFBM)) + while ((readl(port->membase + UARTSR) & + LINFLEXD_UARTSR_DTFTFF) + != LINFLEXD_UARTSR_DTFTFF) + ; + else + while (readl(port->membase + UARTSR) & + LINFLEXD_UARTSR_DTFTFF) + ; + + if (!(cr & LINFLEXD_UARTCR_TFBM)) { + writel((readl(port->membase + UARTSR) | + LINFLEXD_UARTSR_DTFTFF), + port->membase + UARTSR); + } +} + +static void linflex_earlycon_putchar(struct uart_port *port, int ch) +{ + unsigned long flags; + char *ret; + + if (!linflex_earlycon_same_instance) { + linflex_console_putchar(port, ch); + return; + } + + spin_lock_irqsave(&init_lock, flags); + if (!during_init) + goto outside_init; + + if (earlycon_buf.len >= 1 << CONFIG_LOG_BUF_SHIFT) + goto init_release; + + if (!earlycon_buf.cap) { + earlycon_buf.content = kmalloc(EARLYCON_BUFFER_INITIAL_CAP, + GFP_ATOMIC); + earlycon_buf.cap = earlycon_buf.content ? + EARLYCON_BUFFER_INITIAL_CAP : 0; + } else if (earlycon_buf.len == earlycon_buf.cap) { + ret = krealloc(earlycon_buf.content, earlycon_buf.cap << 1, + GFP_ATOMIC); + if (ret) { + earlycon_buf.content = ret; + earlycon_buf.cap <<= 1; + } + } + + if (earlycon_buf.len < earlycon_buf.cap) + earlycon_buf.content[earlycon_buf.len++] = ch; + + goto init_release; + +outside_init: + linflex_console_putchar(port, ch); +init_release: + spin_unlock_irqrestore(&init_lock, flags); +} + +static void linflex_string_write(struct uart_port *sport, const char *s, + unsigned int count) +{ + unsigned long cr, ier = 0; + + ier = readl(sport->membase + LINIER); + linflex_stop_tx(sport); + + cr = readl(sport->membase + UARTCR); + cr |= (LINFLEXD_UARTCR_TXEN); + writel(cr, sport->membase + UARTCR); + + uart_console_write(sport, s, count, linflex_console_putchar); + + writel(ier, sport->membase + LINIER); +} + +static void +linflex_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_port *sport = linflex_ports[co->index]; + unsigned long flags; + int locked = 1; + + if (sport->sysrq) + locked = 0; + else if (oops_in_progress) + locked = spin_trylock_irqsave(&sport->lock, flags); + else + spin_lock_irqsave(&sport->lock, flags); + + linflex_string_write(sport, s, count); + + if (locked) + spin_unlock_irqrestore(&sport->lock, flags); +} + +/* + * if the port was already initialised (eg, by a boot loader), + * try to determine the current setup. + */ +static void __init +linflex_console_get_options(struct uart_port *sport, int *parity, int *bits) +{ + unsigned long cr; + + cr = readl(sport->membase + UARTCR); + cr &= LINFLEXD_UARTCR_RXEN | LINFLEXD_UARTCR_TXEN; + + if (!cr) + return; + + /* ok, the port was enabled */ + + *parity = 'n'; + if (cr & LINFLEXD_UARTCR_PCE) { + if (cr & LINFLEXD_UARTCR_PC0) + *parity = 'o'; + else + *parity = 'e'; + } + + if ((cr & LINFLEXD_UARTCR_WL0) && ((cr & LINFLEXD_UARTCR_WL1) == 0)) { + if (cr & LINFLEXD_UARTCR_PCE) + *bits = 9; + else + *bits = 8; + } +} + +static int __init linflex_console_setup(struct console *co, char *options) +{ + struct uart_port *sport; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + int ret; + int i; + unsigned long flags; + /* + * check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index == -1 || co->index >= ARRAY_SIZE(linflex_ports)) + co->index = 0; + + sport = linflex_ports[co->index]; + if (!sport) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + linflex_console_get_options(sport, &parity, &bits); + + if (earlycon_port && sport->mapbase == earlycon_port->mapbase) { + linflex_earlycon_same_instance = true; + + spin_lock_irqsave(&init_lock, flags); + during_init = true; + spin_unlock_irqrestore(&init_lock, flags); + + /* Workaround for character loss or output of many invalid + * characters, when INIT mode is entered shortly after a + * character has just been printed. + */ + udelay(PREINIT_DELAY); + } + + linflex_setup_watermark(sport); + + ret = uart_set_options(sport, co, baud, parity, bits, flow); + + if (!linflex_earlycon_same_instance) + goto done; + + spin_lock_irqsave(&init_lock, flags); + + /* Emptying buffer */ + if (earlycon_buf.len) { + for (i = 0; i < earlycon_buf.len; i++) + linflex_console_putchar(earlycon_port, + earlycon_buf.content[i]); + + kfree(earlycon_buf.content); + earlycon_buf.len = 0; + } + + during_init = false; + spin_unlock_irqrestore(&init_lock, flags); + +done: + return ret; +} + +static struct uart_driver linflex_reg; +static struct console linflex_console = { + .name = DEV_NAME, + .write = linflex_console_write, + .device = uart_console_device, + .setup = linflex_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &linflex_reg, +}; + +static void linflex_earlycon_write(struct console *con, const char *s, + unsigned int n) +{ + struct earlycon_device *dev = con->data; + + uart_console_write(&dev->port, s, n, linflex_earlycon_putchar); +} + +static int __init linflex_early_console_setup(struct earlycon_device *device, + const char *options) +{ + if (!device->port.membase) + return -ENODEV; + + device->con->write = linflex_earlycon_write; + earlycon_port = &device->port; + + return 0; +} + +OF_EARLYCON_DECLARE(linflex, "fsl,s32v234-linflexuart", + linflex_early_console_setup); + +#define LINFLEX_CONSOLE (&linflex_console) +#else +#define LINFLEX_CONSOLE NULL +#endif + +static struct uart_driver linflex_reg = { + .owner = THIS_MODULE, + .driver_name = DRIVER_NAME, + .dev_name = DEV_NAME, + .nr = ARRAY_SIZE(linflex_ports), + .cons = LINFLEX_CONSOLE, +}; + +static int linflex_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct uart_port *sport; + struct resource *res; + int ret; + + sport = devm_kzalloc(&pdev->dev, sizeof(*sport), GFP_KERNEL); + if (!sport) + return -ENOMEM; + + ret = of_alias_get_id(np, "serial"); + if (ret < 0) { + dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret); + return ret; + } + if (ret >= UART_NR) { + dev_err(&pdev->dev, "driver limited to %d serial ports\n", + UART_NR); + return -ENOMEM; + } + + sport->line = ret; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + sport->mapbase = res->start; + sport->membase = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(sport->membase)) + return PTR_ERR(sport->membase); + + sport->dev = &pdev->dev; + sport->type = PORT_LINFLEXUART; + sport->iotype = UPIO_MEM; + sport->irq = platform_get_irq(pdev, 0); + sport->ops = &linflex_pops; + sport->flags = UPF_BOOT_AUTOCONF; + sport->has_sysrq = IS_ENABLED(CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE); + + linflex_ports[sport->line] = sport; + + platform_set_drvdata(pdev, sport); + + ret = uart_add_one_port(&linflex_reg, sport); + if (ret) + return ret; + + return 0; +} + +static int linflex_remove(struct platform_device *pdev) +{ + struct uart_port *sport = platform_get_drvdata(pdev); + + uart_remove_one_port(&linflex_reg, sport); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int linflex_suspend(struct device *dev) +{ + struct uart_port *sport = dev_get_drvdata(dev); + + uart_suspend_port(&linflex_reg, sport); + + return 0; +} + +static int linflex_resume(struct device *dev) +{ + struct uart_port *sport = dev_get_drvdata(dev); + + uart_resume_port(&linflex_reg, sport); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(linflex_pm_ops, linflex_suspend, linflex_resume); + +static struct platform_driver linflex_driver = { + .probe = linflex_probe, + .remove = linflex_remove, + .driver = { + .name = DRIVER_NAME, + .of_match_table = linflex_dt_ids, + .pm = &linflex_pm_ops, + }, +}; + +static int __init linflex_serial_init(void) +{ + int ret; + + ret = uart_register_driver(&linflex_reg); + if (ret) + return ret; + + ret = platform_driver_register(&linflex_driver); + if (ret) + uart_unregister_driver(&linflex_reg); + + return ret; +} + +static void __exit linflex_serial_exit(void) +{ + platform_driver_unregister(&linflex_driver); + uart_unregister_driver(&linflex_reg); +} + +module_init(linflex_serial_init); +module_exit(linflex_serial_exit); + +MODULE_DESCRIPTION("Freescale LINFlexD serial port driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c new file mode 100644 index 000000000..227fb2d32 --- /dev/null +++ b/drivers/tty/serial/fsl_lpuart.c @@ -0,0 +1,2871 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Freescale lpuart serial port driver + * + * Copyright 2012-2014 Freescale Semiconductor, Inc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* All registers are 8-bit width */ +#define UARTBDH 0x00 +#define UARTBDL 0x01 +#define UARTCR1 0x02 +#define UARTCR2 0x03 +#define UARTSR1 0x04 +#define UARTCR3 0x06 +#define UARTDR 0x07 +#define UARTCR4 0x0a +#define UARTCR5 0x0b +#define UARTMODEM 0x0d +#define UARTPFIFO 0x10 +#define UARTCFIFO 0x11 +#define UARTSFIFO 0x12 +#define UARTTWFIFO 0x13 +#define UARTTCFIFO 0x14 +#define UARTRWFIFO 0x15 + +#define UARTBDH_LBKDIE 0x80 +#define UARTBDH_RXEDGIE 0x40 +#define UARTBDH_SBR_MASK 0x1f + +#define UARTCR1_LOOPS 0x80 +#define UARTCR1_RSRC 0x20 +#define UARTCR1_M 0x10 +#define UARTCR1_WAKE 0x08 +#define UARTCR1_ILT 0x04 +#define UARTCR1_PE 0x02 +#define UARTCR1_PT 0x01 + +#define UARTCR2_TIE 0x80 +#define UARTCR2_TCIE 0x40 +#define UARTCR2_RIE 0x20 +#define UARTCR2_ILIE 0x10 +#define UARTCR2_TE 0x08 +#define UARTCR2_RE 0x04 +#define UARTCR2_RWU 0x02 +#define UARTCR2_SBK 0x01 + +#define UARTSR1_TDRE 0x80 +#define UARTSR1_TC 0x40 +#define UARTSR1_RDRF 0x20 +#define UARTSR1_IDLE 0x10 +#define UARTSR1_OR 0x08 +#define UARTSR1_NF 0x04 +#define UARTSR1_FE 0x02 +#define UARTSR1_PE 0x01 + +#define UARTCR3_R8 0x80 +#define UARTCR3_T8 0x40 +#define UARTCR3_TXDIR 0x20 +#define UARTCR3_TXINV 0x10 +#define UARTCR3_ORIE 0x08 +#define UARTCR3_NEIE 0x04 +#define UARTCR3_FEIE 0x02 +#define UARTCR3_PEIE 0x01 + +#define UARTCR4_MAEN1 0x80 +#define UARTCR4_MAEN2 0x40 +#define UARTCR4_M10 0x20 +#define UARTCR4_BRFA_MASK 0x1f +#define UARTCR4_BRFA_OFF 0 + +#define UARTCR5_TDMAS 0x80 +#define UARTCR5_RDMAS 0x20 + +#define UARTMODEM_RXRTSE 0x08 +#define UARTMODEM_TXRTSPOL 0x04 +#define UARTMODEM_TXRTSE 0x02 +#define UARTMODEM_TXCTSE 0x01 + +#define UARTPFIFO_TXFE 0x80 +#define UARTPFIFO_FIFOSIZE_MASK 0x7 +#define UARTPFIFO_TXSIZE_OFF 4 +#define UARTPFIFO_RXFE 0x08 +#define UARTPFIFO_RXSIZE_OFF 0 + +#define UARTCFIFO_TXFLUSH 0x80 +#define UARTCFIFO_RXFLUSH 0x40 +#define UARTCFIFO_RXOFE 0x04 +#define UARTCFIFO_TXOFE 0x02 +#define UARTCFIFO_RXUFE 0x01 + +#define UARTSFIFO_TXEMPT 0x80 +#define UARTSFIFO_RXEMPT 0x40 +#define UARTSFIFO_RXOF 0x04 +#define UARTSFIFO_TXOF 0x02 +#define UARTSFIFO_RXUF 0x01 + +/* 32-bit register definition */ +#define UARTBAUD 0x00 +#define UARTSTAT 0x04 +#define UARTCTRL 0x08 +#define UARTDATA 0x0C +#define UARTMATCH 0x10 +#define UARTMODIR 0x14 +#define UARTFIFO 0x18 +#define UARTWATER 0x1c + +#define UARTBAUD_MAEN1 0x80000000 +#define UARTBAUD_MAEN2 0x40000000 +#define UARTBAUD_M10 0x20000000 +#define UARTBAUD_TDMAE 0x00800000 +#define UARTBAUD_RDMAE 0x00200000 +#define UARTBAUD_MATCFG 0x00400000 +#define UARTBAUD_BOTHEDGE 0x00020000 +#define UARTBAUD_RESYNCDIS 0x00010000 +#define UARTBAUD_LBKDIE 0x00008000 +#define UARTBAUD_RXEDGIE 0x00004000 +#define UARTBAUD_SBNS 0x00002000 +#define UARTBAUD_SBR 0x00000000 +#define UARTBAUD_SBR_MASK 0x1fff +#define UARTBAUD_OSR_MASK 0x1f +#define UARTBAUD_OSR_SHIFT 24 + +#define UARTSTAT_LBKDIF 0x80000000 +#define UARTSTAT_RXEDGIF 0x40000000 +#define UARTSTAT_MSBF 0x20000000 +#define UARTSTAT_RXINV 0x10000000 +#define UARTSTAT_RWUID 0x08000000 +#define UARTSTAT_BRK13 0x04000000 +#define UARTSTAT_LBKDE 0x02000000 +#define UARTSTAT_RAF 0x01000000 +#define UARTSTAT_TDRE 0x00800000 +#define UARTSTAT_TC 0x00400000 +#define UARTSTAT_RDRF 0x00200000 +#define UARTSTAT_IDLE 0x00100000 +#define UARTSTAT_OR 0x00080000 +#define UARTSTAT_NF 0x00040000 +#define UARTSTAT_FE 0x00020000 +#define UARTSTAT_PE 0x00010000 +#define UARTSTAT_MA1F 0x00008000 +#define UARTSTAT_M21F 0x00004000 + +#define UARTCTRL_R8T9 0x80000000 +#define UARTCTRL_R9T8 0x40000000 +#define UARTCTRL_TXDIR 0x20000000 +#define UARTCTRL_TXINV 0x10000000 +#define UARTCTRL_ORIE 0x08000000 +#define UARTCTRL_NEIE 0x04000000 +#define UARTCTRL_FEIE 0x02000000 +#define UARTCTRL_PEIE 0x01000000 +#define UARTCTRL_TIE 0x00800000 +#define UARTCTRL_TCIE 0x00400000 +#define UARTCTRL_RIE 0x00200000 +#define UARTCTRL_ILIE 0x00100000 +#define UARTCTRL_TE 0x00080000 +#define UARTCTRL_RE 0x00040000 +#define UARTCTRL_RWU 0x00020000 +#define UARTCTRL_SBK 0x00010000 +#define UARTCTRL_MA1IE 0x00008000 +#define UARTCTRL_MA2IE 0x00004000 +#define UARTCTRL_IDLECFG 0x00000100 +#define UARTCTRL_LOOPS 0x00000080 +#define UARTCTRL_DOZEEN 0x00000040 +#define UARTCTRL_RSRC 0x00000020 +#define UARTCTRL_M 0x00000010 +#define UARTCTRL_WAKE 0x00000008 +#define UARTCTRL_ILT 0x00000004 +#define UARTCTRL_PE 0x00000002 +#define UARTCTRL_PT 0x00000001 + +#define UARTDATA_NOISY 0x00008000 +#define UARTDATA_PARITYE 0x00004000 +#define UARTDATA_FRETSC 0x00002000 +#define UARTDATA_RXEMPT 0x00001000 +#define UARTDATA_IDLINE 0x00000800 +#define UARTDATA_MASK 0x3ff + +#define UARTMODIR_IREN 0x00020000 +#define UARTMODIR_TXCTSSRC 0x00000020 +#define UARTMODIR_TXCTSC 0x00000010 +#define UARTMODIR_RXRTSE 0x00000008 +#define UARTMODIR_TXRTSPOL 0x00000004 +#define UARTMODIR_TXRTSE 0x00000002 +#define UARTMODIR_TXCTSE 0x00000001 + +#define UARTFIFO_TXEMPT 0x00800000 +#define UARTFIFO_RXEMPT 0x00400000 +#define UARTFIFO_TXOF 0x00020000 +#define UARTFIFO_RXUF 0x00010000 +#define UARTFIFO_TXFLUSH 0x00008000 +#define UARTFIFO_RXFLUSH 0x00004000 +#define UARTFIFO_TXOFE 0x00000200 +#define UARTFIFO_RXUFE 0x00000100 +#define UARTFIFO_TXFE 0x00000080 +#define UARTFIFO_FIFOSIZE_MASK 0x7 +#define UARTFIFO_TXSIZE_OFF 4 +#define UARTFIFO_RXFE 0x00000008 +#define UARTFIFO_RXSIZE_OFF 0 +#define UARTFIFO_DEPTH(x) (0x1 << ((x) ? ((x) + 1) : 0)) + +#define UARTWATER_COUNT_MASK 0xff +#define UARTWATER_TXCNT_OFF 8 +#define UARTWATER_RXCNT_OFF 24 +#define UARTWATER_WATER_MASK 0xff +#define UARTWATER_TXWATER_OFF 0 +#define UARTWATER_RXWATER_OFF 16 + +/* Rx DMA timeout in ms, which is used to calculate Rx ring buffer size */ +#define DMA_RX_TIMEOUT (10) + +#define DRIVER_NAME "fsl-lpuart" +#define DEV_NAME "ttyLP" +#define UART_NR 6 + +/* IMX lpuart has four extra unused regs located at the beginning */ +#define IMX_REG_OFF 0x10 + +enum lpuart_type { + VF610_LPUART, + LS1021A_LPUART, + LS1028A_LPUART, + IMX7ULP_LPUART, + IMX8QXP_LPUART, +}; + +struct lpuart_port { + struct uart_port port; + enum lpuart_type devtype; + struct clk *ipg_clk; + struct clk *baud_clk; + unsigned int txfifo_size; + unsigned int rxfifo_size; + + bool lpuart_dma_tx_use; + bool lpuart_dma_rx_use; + struct dma_chan *dma_tx_chan; + struct dma_chan *dma_rx_chan; + struct dma_async_tx_descriptor *dma_tx_desc; + struct dma_async_tx_descriptor *dma_rx_desc; + dma_cookie_t dma_tx_cookie; + dma_cookie_t dma_rx_cookie; + unsigned int dma_tx_bytes; + unsigned int dma_rx_bytes; + bool dma_tx_in_progress; + unsigned int dma_rx_timeout; + struct timer_list lpuart_timer; + struct scatterlist rx_sgl, tx_sgl[2]; + struct circ_buf rx_ring; + int rx_dma_rng_buf_len; + unsigned int dma_tx_nents; + wait_queue_head_t dma_wait; +}; + +struct lpuart_soc_data { + enum lpuart_type devtype; + char iotype; + u8 reg_off; +}; + +static const struct lpuart_soc_data vf_data = { + .devtype = VF610_LPUART, + .iotype = UPIO_MEM, +}; + +static const struct lpuart_soc_data ls1021a_data = { + .devtype = LS1021A_LPUART, + .iotype = UPIO_MEM32BE, +}; + +static const struct lpuart_soc_data ls1028a_data = { + .devtype = LS1028A_LPUART, + .iotype = UPIO_MEM32, +}; + +static struct lpuart_soc_data imx7ulp_data = { + .devtype = IMX7ULP_LPUART, + .iotype = UPIO_MEM32, + .reg_off = IMX_REG_OFF, +}; + +static struct lpuart_soc_data imx8qxp_data = { + .devtype = IMX8QXP_LPUART, + .iotype = UPIO_MEM32, + .reg_off = IMX_REG_OFF, +}; + +static const struct of_device_id lpuart_dt_ids[] = { + { .compatible = "fsl,vf610-lpuart", .data = &vf_data, }, + { .compatible = "fsl,ls1021a-lpuart", .data = &ls1021a_data, }, + { .compatible = "fsl,ls1028a-lpuart", .data = &ls1028a_data, }, + { .compatible = "fsl,imx7ulp-lpuart", .data = &imx7ulp_data, }, + { .compatible = "fsl,imx8qxp-lpuart", .data = &imx8qxp_data, }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, lpuart_dt_ids); + +/* Forward declare this for the dma callbacks*/ +static void lpuart_dma_tx_complete(void *arg); + +static inline bool is_layerscape_lpuart(struct lpuart_port *sport) +{ + return (sport->devtype == LS1021A_LPUART || + sport->devtype == LS1028A_LPUART); +} + +static inline bool is_imx8qxp_lpuart(struct lpuart_port *sport) +{ + return sport->devtype == IMX8QXP_LPUART; +} + +static inline u32 lpuart32_read(struct uart_port *port, u32 off) +{ + switch (port->iotype) { + case UPIO_MEM32: + return readl(port->membase + off); + case UPIO_MEM32BE: + return ioread32be(port->membase + off); + default: + return 0; + } +} + +static inline void lpuart32_write(struct uart_port *port, u32 val, + u32 off) +{ + switch (port->iotype) { + case UPIO_MEM32: + writel(val, port->membase + off); + break; + case UPIO_MEM32BE: + iowrite32be(val, port->membase + off); + break; + } +} + +static int __lpuart_enable_clks(struct lpuart_port *sport, bool is_en) +{ + int ret = 0; + + if (is_en) { + ret = clk_prepare_enable(sport->ipg_clk); + if (ret) + return ret; + + ret = clk_prepare_enable(sport->baud_clk); + if (ret) { + clk_disable_unprepare(sport->ipg_clk); + return ret; + } + } else { + clk_disable_unprepare(sport->baud_clk); + clk_disable_unprepare(sport->ipg_clk); + } + + return 0; +} + +static unsigned int lpuart_get_baud_clk_rate(struct lpuart_port *sport) +{ + if (is_imx8qxp_lpuart(sport)) + return clk_get_rate(sport->baud_clk); + + return clk_get_rate(sport->ipg_clk); +} + +#define lpuart_enable_clks(x) __lpuart_enable_clks(x, true) +#define lpuart_disable_clks(x) __lpuart_enable_clks(x, false) + +static void lpuart_stop_tx(struct uart_port *port) +{ + unsigned char temp; + + temp = readb(port->membase + UARTCR2); + temp &= ~(UARTCR2_TIE | UARTCR2_TCIE); + writeb(temp, port->membase + UARTCR2); +} + +static void lpuart32_stop_tx(struct uart_port *port) +{ + unsigned long temp; + + temp = lpuart32_read(port, UARTCTRL); + temp &= ~(UARTCTRL_TIE | UARTCTRL_TCIE); + lpuart32_write(port, temp, UARTCTRL); +} + +static void lpuart_stop_rx(struct uart_port *port) +{ + unsigned char temp; + + temp = readb(port->membase + UARTCR2); + writeb(temp & ~UARTCR2_RE, port->membase + UARTCR2); +} + +static void lpuart32_stop_rx(struct uart_port *port) +{ + unsigned long temp; + + temp = lpuart32_read(port, UARTCTRL); + lpuart32_write(port, temp & ~UARTCTRL_RE, UARTCTRL); +} + +static void lpuart_dma_tx(struct lpuart_port *sport) +{ + struct circ_buf *xmit = &sport->port.state->xmit; + struct scatterlist *sgl = sport->tx_sgl; + struct device *dev = sport->port.dev; + struct dma_chan *chan = sport->dma_tx_chan; + int ret; + + if (sport->dma_tx_in_progress) + return; + + sport->dma_tx_bytes = uart_circ_chars_pending(xmit); + + if (xmit->tail < xmit->head || xmit->head == 0) { + sport->dma_tx_nents = 1; + sg_init_one(sgl, xmit->buf + xmit->tail, sport->dma_tx_bytes); + } else { + sport->dma_tx_nents = 2; + sg_init_table(sgl, 2); + sg_set_buf(sgl, xmit->buf + xmit->tail, + UART_XMIT_SIZE - xmit->tail); + sg_set_buf(sgl + 1, xmit->buf, xmit->head); + } + + ret = dma_map_sg(chan->device->dev, sgl, sport->dma_tx_nents, + DMA_TO_DEVICE); + if (!ret) { + dev_err(dev, "DMA mapping error for TX.\n"); + return; + } + + sport->dma_tx_desc = dmaengine_prep_slave_sg(chan, sgl, + ret, DMA_MEM_TO_DEV, + DMA_PREP_INTERRUPT); + if (!sport->dma_tx_desc) { + dma_unmap_sg(chan->device->dev, sgl, sport->dma_tx_nents, + DMA_TO_DEVICE); + dev_err(dev, "Cannot prepare TX slave DMA!\n"); + return; + } + + sport->dma_tx_desc->callback = lpuart_dma_tx_complete; + sport->dma_tx_desc->callback_param = sport; + sport->dma_tx_in_progress = true; + sport->dma_tx_cookie = dmaengine_submit(sport->dma_tx_desc); + dma_async_issue_pending(chan); +} + +static bool lpuart_stopped_or_empty(struct uart_port *port) +{ + return uart_circ_empty(&port->state->xmit) || uart_tx_stopped(port); +} + +static void lpuart_dma_tx_complete(void *arg) +{ + struct lpuart_port *sport = arg; + struct scatterlist *sgl = &sport->tx_sgl[0]; + struct circ_buf *xmit = &sport->port.state->xmit; + struct dma_chan *chan = sport->dma_tx_chan; + unsigned long flags; + + spin_lock_irqsave(&sport->port.lock, flags); + + dma_unmap_sg(chan->device->dev, sgl, sport->dma_tx_nents, + DMA_TO_DEVICE); + + xmit->tail = (xmit->tail + sport->dma_tx_bytes) & (UART_XMIT_SIZE - 1); + + sport->port.icount.tx += sport->dma_tx_bytes; + sport->dma_tx_in_progress = false; + spin_unlock_irqrestore(&sport->port.lock, flags); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&sport->port); + + if (waitqueue_active(&sport->dma_wait)) { + wake_up(&sport->dma_wait); + return; + } + + spin_lock_irqsave(&sport->port.lock, flags); + + if (!lpuart_stopped_or_empty(&sport->port)) + lpuart_dma_tx(sport); + + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +static dma_addr_t lpuart_dma_datareg_addr(struct lpuart_port *sport) +{ + switch (sport->port.iotype) { + case UPIO_MEM32: + return sport->port.mapbase + UARTDATA; + case UPIO_MEM32BE: + return sport->port.mapbase + UARTDATA + sizeof(u32) - 1; + } + return sport->port.mapbase + UARTDR; +} + +static int lpuart_dma_tx_request(struct uart_port *port) +{ + struct lpuart_port *sport = container_of(port, + struct lpuart_port, port); + struct dma_slave_config dma_tx_sconfig = {}; + int ret; + + dma_tx_sconfig.dst_addr = lpuart_dma_datareg_addr(sport); + dma_tx_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + dma_tx_sconfig.dst_maxburst = 1; + dma_tx_sconfig.direction = DMA_MEM_TO_DEV; + ret = dmaengine_slave_config(sport->dma_tx_chan, &dma_tx_sconfig); + + if (ret) { + dev_err(sport->port.dev, + "DMA slave config failed, err = %d\n", ret); + return ret; + } + + return 0; +} + +static bool lpuart_is_32(struct lpuart_port *sport) +{ + return sport->port.iotype == UPIO_MEM32 || + sport->port.iotype == UPIO_MEM32BE; +} + +static void lpuart_flush_buffer(struct uart_port *port) +{ + struct lpuart_port *sport = container_of(port, struct lpuart_port, port); + struct dma_chan *chan = sport->dma_tx_chan; + u32 val; + + if (sport->lpuart_dma_tx_use) { + if (sport->dma_tx_in_progress) { + dma_unmap_sg(chan->device->dev, &sport->tx_sgl[0], + sport->dma_tx_nents, DMA_TO_DEVICE); + sport->dma_tx_in_progress = false; + } + dmaengine_terminate_all(chan); + } + + if (lpuart_is_32(sport)) { + val = lpuart32_read(&sport->port, UARTFIFO); + val |= UARTFIFO_TXFLUSH | UARTFIFO_RXFLUSH; + lpuart32_write(&sport->port, val, UARTFIFO); + } else { + val = readb(sport->port.membase + UARTCFIFO); + val |= UARTCFIFO_TXFLUSH | UARTCFIFO_RXFLUSH; + writeb(val, sport->port.membase + UARTCFIFO); + } +} + +static void lpuart_wait_bit_set(struct uart_port *port, unsigned int offset, + u8 bit) +{ + while (!(readb(port->membase + offset) & bit)) + cpu_relax(); +} + +static void lpuart32_wait_bit_set(struct uart_port *port, unsigned int offset, + u32 bit) +{ + while (!(lpuart32_read(port, offset) & bit)) + cpu_relax(); +} + +#if defined(CONFIG_CONSOLE_POLL) + +static int lpuart_poll_init(struct uart_port *port) +{ + struct lpuart_port *sport = container_of(port, + struct lpuart_port, port); + unsigned long flags; + unsigned char temp; + + sport->port.fifosize = 0; + + spin_lock_irqsave(&sport->port.lock, flags); + /* Disable Rx & Tx */ + writeb(0, sport->port.membase + UARTCR2); + + temp = readb(sport->port.membase + UARTPFIFO); + /* Enable Rx and Tx FIFO */ + writeb(temp | UARTPFIFO_RXFE | UARTPFIFO_TXFE, + sport->port.membase + UARTPFIFO); + + /* flush Tx and Rx FIFO */ + writeb(UARTCFIFO_TXFLUSH | UARTCFIFO_RXFLUSH, + sport->port.membase + UARTCFIFO); + + /* explicitly clear RDRF */ + if (readb(sport->port.membase + UARTSR1) & UARTSR1_RDRF) { + readb(sport->port.membase + UARTDR); + writeb(UARTSFIFO_RXUF, sport->port.membase + UARTSFIFO); + } + + writeb(0, sport->port.membase + UARTTWFIFO); + writeb(1, sport->port.membase + UARTRWFIFO); + + /* Enable Rx and Tx */ + writeb(UARTCR2_RE | UARTCR2_TE, sport->port.membase + UARTCR2); + spin_unlock_irqrestore(&sport->port.lock, flags); + + return 0; +} + +static void lpuart_poll_put_char(struct uart_port *port, unsigned char c) +{ + /* drain */ + lpuart_wait_bit_set(port, UARTSR1, UARTSR1_TDRE); + writeb(c, port->membase + UARTDR); +} + +static int lpuart_poll_get_char(struct uart_port *port) +{ + if (!(readb(port->membase + UARTSR1) & UARTSR1_RDRF)) + return NO_POLL_CHAR; + + return readb(port->membase + UARTDR); +} + +static int lpuart32_poll_init(struct uart_port *port) +{ + unsigned long flags; + struct lpuart_port *sport = container_of(port, struct lpuart_port, port); + u32 temp; + + sport->port.fifosize = 0; + + spin_lock_irqsave(&sport->port.lock, flags); + + /* Disable Rx & Tx */ + lpuart32_write(&sport->port, 0, UARTCTRL); + + temp = lpuart32_read(&sport->port, UARTFIFO); + + /* Enable Rx and Tx FIFO */ + lpuart32_write(&sport->port, temp | UARTFIFO_RXFE | UARTFIFO_TXFE, UARTFIFO); + + /* flush Tx and Rx FIFO */ + lpuart32_write(&sport->port, UARTFIFO_TXFLUSH | UARTFIFO_RXFLUSH, UARTFIFO); + + /* explicitly clear RDRF */ + if (lpuart32_read(&sport->port, UARTSTAT) & UARTSTAT_RDRF) { + lpuart32_read(&sport->port, UARTDATA); + lpuart32_write(&sport->port, UARTFIFO_RXUF, UARTFIFO); + } + + /* Enable Rx and Tx */ + lpuart32_write(&sport->port, UARTCTRL_RE | UARTCTRL_TE, UARTCTRL); + spin_unlock_irqrestore(&sport->port.lock, flags); + + return 0; +} + +static void lpuart32_poll_put_char(struct uart_port *port, unsigned char c) +{ + lpuart32_wait_bit_set(port, UARTSTAT, UARTSTAT_TDRE); + lpuart32_write(port, c, UARTDATA); +} + +static int lpuart32_poll_get_char(struct uart_port *port) +{ + if (!(lpuart32_read(port, UARTWATER) >> UARTWATER_RXCNT_OFF)) + return NO_POLL_CHAR; + + return lpuart32_read(port, UARTDATA); +} +#endif + +static inline void lpuart_transmit_buffer(struct lpuart_port *sport) +{ + struct circ_buf *xmit = &sport->port.state->xmit; + + if (sport->port.x_char) { + writeb(sport->port.x_char, sport->port.membase + UARTDR); + sport->port.icount.tx++; + sport->port.x_char = 0; + return; + } + + if (lpuart_stopped_or_empty(&sport->port)) { + lpuart_stop_tx(&sport->port); + return; + } + + while (!uart_circ_empty(xmit) && + (readb(sport->port.membase + UARTTCFIFO) < sport->txfifo_size)) { + writeb(xmit->buf[xmit->tail], sport->port.membase + UARTDR); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + sport->port.icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&sport->port); + + if (uart_circ_empty(xmit)) + lpuart_stop_tx(&sport->port); +} + +static inline void lpuart32_transmit_buffer(struct lpuart_port *sport) +{ + struct circ_buf *xmit = &sport->port.state->xmit; + unsigned long txcnt; + + if (sport->port.x_char) { + lpuart32_write(&sport->port, sport->port.x_char, UARTDATA); + sport->port.icount.tx++; + sport->port.x_char = 0; + return; + } + + if (lpuart_stopped_or_empty(&sport->port)) { + lpuart32_stop_tx(&sport->port); + return; + } + + txcnt = lpuart32_read(&sport->port, UARTWATER); + txcnt = txcnt >> UARTWATER_TXCNT_OFF; + txcnt &= UARTWATER_COUNT_MASK; + while (!uart_circ_empty(xmit) && (txcnt < sport->txfifo_size)) { + lpuart32_write(&sport->port, xmit->buf[xmit->tail], UARTDATA); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + sport->port.icount.tx++; + txcnt = lpuart32_read(&sport->port, UARTWATER); + txcnt = txcnt >> UARTWATER_TXCNT_OFF; + txcnt &= UARTWATER_COUNT_MASK; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&sport->port); + + if (uart_circ_empty(xmit)) + lpuart32_stop_tx(&sport->port); +} + +static void lpuart_start_tx(struct uart_port *port) +{ + struct lpuart_port *sport = container_of(port, + struct lpuart_port, port); + unsigned char temp; + + temp = readb(port->membase + UARTCR2); + writeb(temp | UARTCR2_TIE, port->membase + UARTCR2); + + if (sport->lpuart_dma_tx_use) { + if (!lpuart_stopped_or_empty(port)) + lpuart_dma_tx(sport); + } else { + if (readb(port->membase + UARTSR1) & UARTSR1_TDRE) + lpuart_transmit_buffer(sport); + } +} + +static void lpuart32_start_tx(struct uart_port *port) +{ + struct lpuart_port *sport = container_of(port, struct lpuart_port, port); + unsigned long temp; + + if (sport->lpuart_dma_tx_use) { + if (!lpuart_stopped_or_empty(port)) + lpuart_dma_tx(sport); + } else { + temp = lpuart32_read(port, UARTCTRL); + lpuart32_write(port, temp | UARTCTRL_TIE, UARTCTRL); + + if (lpuart32_read(port, UARTSTAT) & UARTSTAT_TDRE) + lpuart32_transmit_buffer(sport); + } +} + +/* return TIOCSER_TEMT when transmitter is not busy */ +static unsigned int lpuart_tx_empty(struct uart_port *port) +{ + struct lpuart_port *sport = container_of(port, + struct lpuart_port, port); + unsigned char sr1 = readb(port->membase + UARTSR1); + unsigned char sfifo = readb(port->membase + UARTSFIFO); + + if (sport->dma_tx_in_progress) + return 0; + + if (sr1 & UARTSR1_TC && sfifo & UARTSFIFO_TXEMPT) + return TIOCSER_TEMT; + + return 0; +} + +static unsigned int lpuart32_tx_empty(struct uart_port *port) +{ + struct lpuart_port *sport = container_of(port, + struct lpuart_port, port); + unsigned long stat = lpuart32_read(port, UARTSTAT); + unsigned long sfifo = lpuart32_read(port, UARTFIFO); + unsigned long ctrl = lpuart32_read(port, UARTCTRL); + + if (sport->dma_tx_in_progress) + return 0; + + /* + * LPUART Transmission Complete Flag may never be set while queuing a break + * character, so avoid checking for transmission complete when UARTCTRL_SBK + * is asserted. + */ + if ((stat & UARTSTAT_TC && sfifo & UARTFIFO_TXEMPT) || ctrl & UARTCTRL_SBK) + return TIOCSER_TEMT; + + return 0; +} + +static void lpuart_txint(struct lpuart_port *sport) +{ + unsigned long flags; + + spin_lock_irqsave(&sport->port.lock, flags); + lpuart_transmit_buffer(sport); + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +static void lpuart_rxint(struct lpuart_port *sport) +{ + unsigned int flg, ignored = 0, overrun = 0; + struct tty_port *port = &sport->port.state->port; + unsigned long flags; + unsigned char rx, sr; + + spin_lock_irqsave(&sport->port.lock, flags); + + while (!(readb(sport->port.membase + UARTSFIFO) & UARTSFIFO_RXEMPT)) { + flg = TTY_NORMAL; + sport->port.icount.rx++; + /* + * to clear the FE, OR, NF, FE, PE flags, + * read SR1 then read DR + */ + sr = readb(sport->port.membase + UARTSR1); + rx = readb(sport->port.membase + UARTDR); + + if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx)) + continue; + + if (sr & (UARTSR1_PE | UARTSR1_OR | UARTSR1_FE)) { + if (sr & UARTSR1_PE) + sport->port.icount.parity++; + else if (sr & UARTSR1_FE) + sport->port.icount.frame++; + + if (sr & UARTSR1_OR) + overrun++; + + if (sr & sport->port.ignore_status_mask) { + if (++ignored > 100) + goto out; + continue; + } + + sr &= sport->port.read_status_mask; + + if (sr & UARTSR1_PE) + flg = TTY_PARITY; + else if (sr & UARTSR1_FE) + flg = TTY_FRAME; + + if (sr & UARTSR1_OR) + flg = TTY_OVERRUN; + + sport->port.sysrq = 0; + } + + tty_insert_flip_char(port, rx, flg); + } + +out: + if (overrun) { + sport->port.icount.overrun += overrun; + + /* + * Overruns cause FIFO pointers to become missaligned. + * Flushing the receive FIFO reinitializes the pointers. + */ + writeb(UARTCFIFO_RXFLUSH, sport->port.membase + UARTCFIFO); + writeb(UARTSFIFO_RXOF, sport->port.membase + UARTSFIFO); + } + + spin_unlock_irqrestore(&sport->port.lock, flags); + + tty_flip_buffer_push(port); +} + +static void lpuart32_txint(struct lpuart_port *sport) +{ + unsigned long flags; + + spin_lock_irqsave(&sport->port.lock, flags); + lpuart32_transmit_buffer(sport); + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +static void lpuart32_rxint(struct lpuart_port *sport) +{ + unsigned int flg, ignored = 0; + struct tty_port *port = &sport->port.state->port; + unsigned long flags; + unsigned long rx, sr; + + spin_lock_irqsave(&sport->port.lock, flags); + + while (!(lpuart32_read(&sport->port, UARTFIFO) & UARTFIFO_RXEMPT)) { + flg = TTY_NORMAL; + sport->port.icount.rx++; + /* + * to clear the FE, OR, NF, FE, PE flags, + * read STAT then read DATA reg + */ + sr = lpuart32_read(&sport->port, UARTSTAT); + rx = lpuart32_read(&sport->port, UARTDATA); + rx &= 0x3ff; + + if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx)) + continue; + + if (sr & (UARTSTAT_PE | UARTSTAT_OR | UARTSTAT_FE)) { + if (sr & UARTSTAT_PE) + sport->port.icount.parity++; + else if (sr & UARTSTAT_FE) + sport->port.icount.frame++; + + if (sr & UARTSTAT_OR) + sport->port.icount.overrun++; + + if (sr & sport->port.ignore_status_mask) { + if (++ignored > 100) + goto out; + continue; + } + + sr &= sport->port.read_status_mask; + + if (sr & UARTSTAT_PE) + flg = TTY_PARITY; + else if (sr & UARTSTAT_FE) + flg = TTY_FRAME; + + if (sr & UARTSTAT_OR) + flg = TTY_OVERRUN; + + sport->port.sysrq = 0; + } + + tty_insert_flip_char(port, rx, flg); + } + +out: + spin_unlock_irqrestore(&sport->port.lock, flags); + + tty_flip_buffer_push(port); +} + +static irqreturn_t lpuart_int(int irq, void *dev_id) +{ + struct lpuart_port *sport = dev_id; + unsigned char sts; + + sts = readb(sport->port.membase + UARTSR1); + + /* SysRq, using dma, check for linebreak by framing err. */ + if (sts & UARTSR1_FE && sport->lpuart_dma_rx_use) { + readb(sport->port.membase + UARTDR); + uart_handle_break(&sport->port); + /* linebreak produces some garbage, removing it */ + writeb(UARTCFIFO_RXFLUSH, sport->port.membase + UARTCFIFO); + return IRQ_HANDLED; + } + + if (sts & UARTSR1_RDRF && !sport->lpuart_dma_rx_use) + lpuart_rxint(sport); + + if (sts & UARTSR1_TDRE && !sport->lpuart_dma_tx_use) + lpuart_txint(sport); + + return IRQ_HANDLED; +} + +static irqreturn_t lpuart32_int(int irq, void *dev_id) +{ + struct lpuart_port *sport = dev_id; + unsigned long sts, rxcount; + + sts = lpuart32_read(&sport->port, UARTSTAT); + rxcount = lpuart32_read(&sport->port, UARTWATER); + rxcount = rxcount >> UARTWATER_RXCNT_OFF; + + if ((sts & UARTSTAT_RDRF || rxcount > 0) && !sport->lpuart_dma_rx_use) + lpuart32_rxint(sport); + + if ((sts & UARTSTAT_TDRE) && !sport->lpuart_dma_tx_use) + lpuart32_txint(sport); + + lpuart32_write(&sport->port, sts, UARTSTAT); + return IRQ_HANDLED; +} + + +static inline void lpuart_handle_sysrq_chars(struct uart_port *port, + unsigned char *p, int count) +{ + while (count--) { + if (*p && uart_handle_sysrq_char(port, *p)) + return; + p++; + } +} + +static void lpuart_handle_sysrq(struct lpuart_port *sport) +{ + struct circ_buf *ring = &sport->rx_ring; + int count; + + if (ring->head < ring->tail) { + count = sport->rx_sgl.length - ring->tail; + lpuart_handle_sysrq_chars(&sport->port, + ring->buf + ring->tail, count); + ring->tail = 0; + } + + if (ring->head > ring->tail) { + count = ring->head - ring->tail; + lpuart_handle_sysrq_chars(&sport->port, + ring->buf + ring->tail, count); + ring->tail = ring->head; + } +} + +static void lpuart_copy_rx_to_tty(struct lpuart_port *sport) +{ + struct tty_port *port = &sport->port.state->port; + struct dma_tx_state state; + enum dma_status dmastat; + struct dma_chan *chan = sport->dma_rx_chan; + struct circ_buf *ring = &sport->rx_ring; + unsigned long flags; + int count = 0; + + if (lpuart_is_32(sport)) { + unsigned long sr = lpuart32_read(&sport->port, UARTSTAT); + + if (sr & (UARTSTAT_PE | UARTSTAT_FE)) { + /* Clear the error flags */ + lpuart32_write(&sport->port, sr, UARTSTAT); + + if (sr & UARTSTAT_PE) + sport->port.icount.parity++; + else if (sr & UARTSTAT_FE) + sport->port.icount.frame++; + } + } else { + unsigned char sr = readb(sport->port.membase + UARTSR1); + + if (sr & (UARTSR1_PE | UARTSR1_FE)) { + unsigned char cr2; + + /* Disable receiver during this operation... */ + cr2 = readb(sport->port.membase + UARTCR2); + cr2 &= ~UARTCR2_RE; + writeb(cr2, sport->port.membase + UARTCR2); + + /* Read DR to clear the error flags */ + readb(sport->port.membase + UARTDR); + + if (sr & UARTSR1_PE) + sport->port.icount.parity++; + else if (sr & UARTSR1_FE) + sport->port.icount.frame++; + /* + * At this point parity/framing error is + * cleared However, since the DMA already read + * the data register and we had to read it + * again after reading the status register to + * properly clear the flags, the FIFO actually + * underflowed... This requires a clearing of + * the FIFO... + */ + if (readb(sport->port.membase + UARTSFIFO) & + UARTSFIFO_RXUF) { + writeb(UARTSFIFO_RXUF, + sport->port.membase + UARTSFIFO); + writeb(UARTCFIFO_RXFLUSH, + sport->port.membase + UARTCFIFO); + } + + cr2 |= UARTCR2_RE; + writeb(cr2, sport->port.membase + UARTCR2); + } + } + + async_tx_ack(sport->dma_rx_desc); + + spin_lock_irqsave(&sport->port.lock, flags); + + dmastat = dmaengine_tx_status(chan, sport->dma_rx_cookie, &state); + if (dmastat == DMA_ERROR) { + dev_err(sport->port.dev, "Rx DMA transfer failed!\n"); + spin_unlock_irqrestore(&sport->port.lock, flags); + return; + } + + /* CPU claims ownership of RX DMA buffer */ + dma_sync_sg_for_cpu(chan->device->dev, &sport->rx_sgl, 1, + DMA_FROM_DEVICE); + + /* + * ring->head points to the end of data already written by the DMA. + * ring->tail points to the beginning of data to be read by the + * framework. + * The current transfer size should not be larger than the dma buffer + * length. + */ + ring->head = sport->rx_sgl.length - state.residue; + BUG_ON(ring->head > sport->rx_sgl.length); + + /* + * Silent handling of keys pressed in the sysrq timeframe + */ + if (sport->port.sysrq) { + lpuart_handle_sysrq(sport); + goto exit; + } + + /* + * At this point ring->head may point to the first byte right after the + * last byte of the dma buffer: + * 0 <= ring->head <= sport->rx_sgl.length + * + * However ring->tail must always points inside the dma buffer: + * 0 <= ring->tail <= sport->rx_sgl.length - 1 + * + * Since we use a ring buffer, we have to handle the case + * where head is lower than tail. In such a case, we first read from + * tail to the end of the buffer then reset tail. + */ + if (ring->head < ring->tail) { + count = sport->rx_sgl.length - ring->tail; + + tty_insert_flip_string(port, ring->buf + ring->tail, count); + ring->tail = 0; + sport->port.icount.rx += count; + } + + /* Finally we read data from tail to head */ + if (ring->tail < ring->head) { + count = ring->head - ring->tail; + tty_insert_flip_string(port, ring->buf + ring->tail, count); + /* Wrap ring->head if needed */ + if (ring->head >= sport->rx_sgl.length) + ring->head = 0; + ring->tail = ring->head; + sport->port.icount.rx += count; + } + +exit: + dma_sync_sg_for_device(chan->device->dev, &sport->rx_sgl, 1, + DMA_FROM_DEVICE); + + spin_unlock_irqrestore(&sport->port.lock, flags); + + tty_flip_buffer_push(port); + mod_timer(&sport->lpuart_timer, jiffies + sport->dma_rx_timeout); +} + +static void lpuart_dma_rx_complete(void *arg) +{ + struct lpuart_port *sport = arg; + + lpuart_copy_rx_to_tty(sport); +} + +static void lpuart_timer_func(struct timer_list *t) +{ + struct lpuart_port *sport = from_timer(sport, t, lpuart_timer); + + lpuart_copy_rx_to_tty(sport); +} + +static inline int lpuart_start_rx_dma(struct lpuart_port *sport) +{ + struct dma_slave_config dma_rx_sconfig = {}; + struct circ_buf *ring = &sport->rx_ring; + int ret, nent; + int bits, baud; + struct tty_port *port = &sport->port.state->port; + struct tty_struct *tty = port->tty; + struct ktermios *termios = &tty->termios; + struct dma_chan *chan = sport->dma_rx_chan; + + baud = tty_get_baud_rate(tty); + + bits = (termios->c_cflag & CSIZE) == CS7 ? 9 : 10; + if (termios->c_cflag & PARENB) + bits++; + + /* + * Calculate length of one DMA buffer size to keep latency below + * 10ms at any baud rate. + */ + sport->rx_dma_rng_buf_len = (DMA_RX_TIMEOUT * baud / bits / 1000) * 2; + sport->rx_dma_rng_buf_len = (1 << fls(sport->rx_dma_rng_buf_len)); + if (sport->rx_dma_rng_buf_len < 16) + sport->rx_dma_rng_buf_len = 16; + + ring->buf = kzalloc(sport->rx_dma_rng_buf_len, GFP_ATOMIC); + if (!ring->buf) + return -ENOMEM; + + sg_init_one(&sport->rx_sgl, ring->buf, sport->rx_dma_rng_buf_len); + nent = dma_map_sg(chan->device->dev, &sport->rx_sgl, 1, + DMA_FROM_DEVICE); + + if (!nent) { + dev_err(sport->port.dev, "DMA Rx mapping error\n"); + return -EINVAL; + } + + dma_rx_sconfig.src_addr = lpuart_dma_datareg_addr(sport); + dma_rx_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + dma_rx_sconfig.src_maxburst = 1; + dma_rx_sconfig.direction = DMA_DEV_TO_MEM; + ret = dmaengine_slave_config(chan, &dma_rx_sconfig); + + if (ret < 0) { + dev_err(sport->port.dev, + "DMA Rx slave config failed, err = %d\n", ret); + return ret; + } + + sport->dma_rx_desc = dmaengine_prep_dma_cyclic(chan, + sg_dma_address(&sport->rx_sgl), + sport->rx_sgl.length, + sport->rx_sgl.length / 2, + DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT); + if (!sport->dma_rx_desc) { + dev_err(sport->port.dev, "Cannot prepare cyclic DMA\n"); + return -EFAULT; + } + + sport->dma_rx_desc->callback = lpuart_dma_rx_complete; + sport->dma_rx_desc->callback_param = sport; + sport->dma_rx_cookie = dmaengine_submit(sport->dma_rx_desc); + dma_async_issue_pending(chan); + + if (lpuart_is_32(sport)) { + unsigned long temp = lpuart32_read(&sport->port, UARTBAUD); + + lpuart32_write(&sport->port, temp | UARTBAUD_RDMAE, UARTBAUD); + } else { + writeb(readb(sport->port.membase + UARTCR5) | UARTCR5_RDMAS, + sport->port.membase + UARTCR5); + } + + return 0; +} + +static void lpuart_dma_rx_free(struct uart_port *port) +{ + struct lpuart_port *sport = container_of(port, + struct lpuart_port, port); + struct dma_chan *chan = sport->dma_rx_chan; + + dmaengine_terminate_all(chan); + del_timer_sync(&sport->lpuart_timer); + dma_unmap_sg(chan->device->dev, &sport->rx_sgl, 1, DMA_FROM_DEVICE); + kfree(sport->rx_ring.buf); + sport->rx_ring.tail = 0; + sport->rx_ring.head = 0; + sport->dma_rx_desc = NULL; + sport->dma_rx_cookie = -EINVAL; +} + +static int lpuart_config_rs485(struct uart_port *port, + struct serial_rs485 *rs485) +{ + struct lpuart_port *sport = container_of(port, + struct lpuart_port, port); + + u8 modem = readb(sport->port.membase + UARTMODEM) & + ~(UARTMODEM_TXRTSPOL | UARTMODEM_TXRTSE); + writeb(modem, sport->port.membase + UARTMODEM); + + /* clear unsupported configurations */ + rs485->delay_rts_before_send = 0; + rs485->delay_rts_after_send = 0; + rs485->flags &= ~SER_RS485_RX_DURING_TX; + + if (rs485->flags & SER_RS485_ENABLED) { + /* Enable auto RS-485 RTS mode */ + modem |= UARTMODEM_TXRTSE; + + /* + * RTS needs to be logic HIGH either during transfer _or_ after + * transfer, other variants are not supported by the hardware. + */ + + if (!(rs485->flags & (SER_RS485_RTS_ON_SEND | + SER_RS485_RTS_AFTER_SEND))) + rs485->flags |= SER_RS485_RTS_ON_SEND; + + if (rs485->flags & SER_RS485_RTS_ON_SEND && + rs485->flags & SER_RS485_RTS_AFTER_SEND) + rs485->flags &= ~SER_RS485_RTS_AFTER_SEND; + + /* + * The hardware defaults to RTS logic HIGH while transfer. + * Switch polarity in case RTS shall be logic HIGH + * after transfer. + * Note: UART is assumed to be active high. + */ + if (rs485->flags & SER_RS485_RTS_ON_SEND) + modem &= ~UARTMODEM_TXRTSPOL; + else if (rs485->flags & SER_RS485_RTS_AFTER_SEND) + modem |= UARTMODEM_TXRTSPOL; + } + + /* Store the new configuration */ + sport->port.rs485 = *rs485; + + writeb(modem, sport->port.membase + UARTMODEM); + return 0; +} + +static int lpuart32_config_rs485(struct uart_port *port, + struct serial_rs485 *rs485) +{ + struct lpuart_port *sport = container_of(port, + struct lpuart_port, port); + + unsigned long modem = lpuart32_read(&sport->port, UARTMODIR) + & ~(UARTMODEM_TXRTSPOL | UARTMODEM_TXRTSE); + lpuart32_write(&sport->port, modem, UARTMODIR); + + /* clear unsupported configurations */ + rs485->delay_rts_before_send = 0; + rs485->delay_rts_after_send = 0; + rs485->flags &= ~SER_RS485_RX_DURING_TX; + + if (rs485->flags & SER_RS485_ENABLED) { + /* Enable auto RS-485 RTS mode */ + modem |= UARTMODEM_TXRTSE; + + /* + * RTS needs to be logic HIGH either during transfer _or_ after + * transfer, other variants are not supported by the hardware. + */ + + if (!(rs485->flags & (SER_RS485_RTS_ON_SEND | + SER_RS485_RTS_AFTER_SEND))) + rs485->flags |= SER_RS485_RTS_ON_SEND; + + if (rs485->flags & SER_RS485_RTS_ON_SEND && + rs485->flags & SER_RS485_RTS_AFTER_SEND) + rs485->flags &= ~SER_RS485_RTS_AFTER_SEND; + + /* + * The hardware defaults to RTS logic HIGH while transfer. + * Switch polarity in case RTS shall be logic HIGH + * after transfer. + * Note: UART is assumed to be active high. + */ + if (rs485->flags & SER_RS485_RTS_ON_SEND) + modem |= UARTMODEM_TXRTSPOL; + else if (rs485->flags & SER_RS485_RTS_AFTER_SEND) + modem &= ~UARTMODEM_TXRTSPOL; + } + + /* Store the new configuration */ + sport->port.rs485 = *rs485; + + lpuart32_write(&sport->port, modem, UARTMODIR); + return 0; +} + +static unsigned int lpuart_get_mctrl(struct uart_port *port) +{ + unsigned int temp = 0; + unsigned char reg; + + reg = readb(port->membase + UARTMODEM); + if (reg & UARTMODEM_TXCTSE) + temp |= TIOCM_CTS; + + if (reg & UARTMODEM_RXRTSE) + temp |= TIOCM_RTS; + + return temp; +} + +static unsigned int lpuart32_get_mctrl(struct uart_port *port) +{ + return 0; +} + +static void lpuart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + unsigned char temp; + struct lpuart_port *sport = container_of(port, + struct lpuart_port, port); + + /* Make sure RXRTSE bit is not set when RS485 is enabled */ + if (!(sport->port.rs485.flags & SER_RS485_ENABLED)) { + temp = readb(sport->port.membase + UARTMODEM) & + ~(UARTMODEM_RXRTSE | UARTMODEM_TXCTSE); + + if (mctrl & TIOCM_RTS) + temp |= UARTMODEM_RXRTSE; + + if (mctrl & TIOCM_CTS) + temp |= UARTMODEM_TXCTSE; + + writeb(temp, port->membase + UARTMODEM); + } +} + +static void lpuart32_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + +} + +static void lpuart_break_ctl(struct uart_port *port, int break_state) +{ + unsigned char temp; + + temp = readb(port->membase + UARTCR2) & ~UARTCR2_SBK; + + if (break_state != 0) + temp |= UARTCR2_SBK; + + writeb(temp, port->membase + UARTCR2); +} + +static void lpuart32_break_ctl(struct uart_port *port, int break_state) +{ + unsigned long temp; + + temp = lpuart32_read(port, UARTCTRL); + + /* + * LPUART IP now has two known bugs, one is CTS has higher priority than the + * break signal, which causes the break signal sending through UARTCTRL_SBK + * may impacted by the CTS input if the HW flow control is enabled. It + * exists on all platforms we support in this driver. + * Another bug is i.MX8QM LPUART may have an additional break character + * being sent after SBK was cleared. + * To avoid above two bugs, we use Transmit Data Inversion function to send + * the break signal instead of UARTCTRL_SBK. + */ + if (break_state != 0) { + /* + * Disable the transmitter to prevent any data from being sent out + * during break, then invert the TX line to send break. + */ + temp &= ~UARTCTRL_TE; + lpuart32_write(port, temp, UARTCTRL); + temp |= UARTCTRL_TXINV; + lpuart32_write(port, temp, UARTCTRL); + } else { + /* Disable the TXINV to turn off break and re-enable transmitter. */ + temp &= ~UARTCTRL_TXINV; + lpuart32_write(port, temp, UARTCTRL); + temp |= UARTCTRL_TE; + lpuart32_write(port, temp, UARTCTRL); + } +} + +static void lpuart_setup_watermark(struct lpuart_port *sport) +{ + unsigned char val, cr2; + unsigned char cr2_saved; + + cr2 = readb(sport->port.membase + UARTCR2); + cr2_saved = cr2; + cr2 &= ~(UARTCR2_TIE | UARTCR2_TCIE | UARTCR2_TE | + UARTCR2_RIE | UARTCR2_RE); + writeb(cr2, sport->port.membase + UARTCR2); + + val = readb(sport->port.membase + UARTPFIFO); + writeb(val | UARTPFIFO_TXFE | UARTPFIFO_RXFE, + sport->port.membase + UARTPFIFO); + + /* flush Tx and Rx FIFO */ + writeb(UARTCFIFO_TXFLUSH | UARTCFIFO_RXFLUSH, + sport->port.membase + UARTCFIFO); + + /* explicitly clear RDRF */ + if (readb(sport->port.membase + UARTSR1) & UARTSR1_RDRF) { + readb(sport->port.membase + UARTDR); + writeb(UARTSFIFO_RXUF, sport->port.membase + UARTSFIFO); + } + + writeb(0, sport->port.membase + UARTTWFIFO); + writeb(1, sport->port.membase + UARTRWFIFO); + + /* Restore cr2 */ + writeb(cr2_saved, sport->port.membase + UARTCR2); +} + +static void lpuart_setup_watermark_enable(struct lpuart_port *sport) +{ + unsigned char cr2; + + lpuart_setup_watermark(sport); + + cr2 = readb(sport->port.membase + UARTCR2); + cr2 |= UARTCR2_RIE | UARTCR2_RE | UARTCR2_TE; + writeb(cr2, sport->port.membase + UARTCR2); +} + +static void lpuart32_setup_watermark(struct lpuart_port *sport) +{ + unsigned long val, ctrl; + unsigned long ctrl_saved; + + ctrl = lpuart32_read(&sport->port, UARTCTRL); + ctrl_saved = ctrl; + ctrl &= ~(UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_TE | + UARTCTRL_RIE | UARTCTRL_RE); + lpuart32_write(&sport->port, ctrl, UARTCTRL); + + /* enable FIFO mode */ + val = lpuart32_read(&sport->port, UARTFIFO); + val |= UARTFIFO_TXFE | UARTFIFO_RXFE; + val |= UARTFIFO_TXFLUSH | UARTFIFO_RXFLUSH; + lpuart32_write(&sport->port, val, UARTFIFO); + + /* set the watermark */ + val = (0x1 << UARTWATER_RXWATER_OFF) | (0x0 << UARTWATER_TXWATER_OFF); + lpuart32_write(&sport->port, val, UARTWATER); + + /* Restore cr2 */ + lpuart32_write(&sport->port, ctrl_saved, UARTCTRL); +} + +static void lpuart32_setup_watermark_enable(struct lpuart_port *sport) +{ + u32 temp; + + lpuart32_setup_watermark(sport); + + temp = lpuart32_read(&sport->port, UARTCTRL); + temp |= UARTCTRL_RE | UARTCTRL_TE | UARTCTRL_ILIE; + lpuart32_write(&sport->port, temp, UARTCTRL); +} + +static void rx_dma_timer_init(struct lpuart_port *sport) +{ + timer_setup(&sport->lpuart_timer, lpuart_timer_func, 0); + sport->lpuart_timer.expires = jiffies + sport->dma_rx_timeout; + add_timer(&sport->lpuart_timer); +} + +static void lpuart_request_dma(struct lpuart_port *sport) +{ + sport->dma_tx_chan = dma_request_chan(sport->port.dev, "tx"); + if (IS_ERR(sport->dma_tx_chan)) { + dev_dbg_once(sport->port.dev, + "DMA tx channel request failed, operating without tx DMA (%ld)\n", + PTR_ERR(sport->dma_tx_chan)); + sport->dma_tx_chan = NULL; + } + + sport->dma_rx_chan = dma_request_chan(sport->port.dev, "rx"); + if (IS_ERR(sport->dma_rx_chan)) { + dev_dbg_once(sport->port.dev, + "DMA rx channel request failed, operating without rx DMA (%ld)\n", + PTR_ERR(sport->dma_rx_chan)); + sport->dma_rx_chan = NULL; + } +} + +static void lpuart_tx_dma_startup(struct lpuart_port *sport) +{ + u32 uartbaud; + int ret; + + if (uart_console(&sport->port)) + goto err; + + if (!sport->dma_tx_chan) + goto err; + + ret = lpuart_dma_tx_request(&sport->port); + if (ret) + goto err; + + init_waitqueue_head(&sport->dma_wait); + sport->lpuart_dma_tx_use = true; + if (lpuart_is_32(sport)) { + uartbaud = lpuart32_read(&sport->port, UARTBAUD); + lpuart32_write(&sport->port, + uartbaud | UARTBAUD_TDMAE, UARTBAUD); + } else { + writeb(readb(sport->port.membase + UARTCR5) | + UARTCR5_TDMAS, sport->port.membase + UARTCR5); + } + + return; + +err: + sport->lpuart_dma_tx_use = false; +} + +static void lpuart_rx_dma_startup(struct lpuart_port *sport) +{ + int ret; + unsigned char cr3; + + if (uart_console(&sport->port)) + goto err; + + if (!sport->dma_rx_chan) + goto err; + + ret = lpuart_start_rx_dma(sport); + if (ret) + goto err; + + /* set Rx DMA timeout */ + sport->dma_rx_timeout = msecs_to_jiffies(DMA_RX_TIMEOUT); + if (!sport->dma_rx_timeout) + sport->dma_rx_timeout = 1; + + sport->lpuart_dma_rx_use = true; + rx_dma_timer_init(sport); + + if (sport->port.has_sysrq && !lpuart_is_32(sport)) { + cr3 = readb(sport->port.membase + UARTCR3); + cr3 |= UARTCR3_FEIE; + writeb(cr3, sport->port.membase + UARTCR3); + } + + return; + +err: + sport->lpuart_dma_rx_use = false; +} + +static int lpuart_startup(struct uart_port *port) +{ + struct lpuart_port *sport = container_of(port, struct lpuart_port, port); + unsigned long flags; + unsigned char temp; + + /* determine FIFO size and enable FIFO mode */ + temp = readb(sport->port.membase + UARTPFIFO); + + sport->txfifo_size = UARTFIFO_DEPTH((temp >> UARTPFIFO_TXSIZE_OFF) & + UARTPFIFO_FIFOSIZE_MASK); + sport->port.fifosize = sport->txfifo_size; + + sport->rxfifo_size = UARTFIFO_DEPTH((temp >> UARTPFIFO_RXSIZE_OFF) & + UARTPFIFO_FIFOSIZE_MASK); + + lpuart_request_dma(sport); + + spin_lock_irqsave(&sport->port.lock, flags); + + lpuart_setup_watermark_enable(sport); + + lpuart_rx_dma_startup(sport); + lpuart_tx_dma_startup(sport); + + spin_unlock_irqrestore(&sport->port.lock, flags); + + return 0; +} + +static void lpuart32_configure(struct lpuart_port *sport) +{ + unsigned long temp; + + if (sport->lpuart_dma_rx_use) { + /* RXWATER must be 0 */ + temp = lpuart32_read(&sport->port, UARTWATER); + temp &= ~(UARTWATER_WATER_MASK << UARTWATER_RXWATER_OFF); + lpuart32_write(&sport->port, temp, UARTWATER); + } + temp = lpuart32_read(&sport->port, UARTCTRL); + if (!sport->lpuart_dma_rx_use) + temp |= UARTCTRL_RIE; + if (!sport->lpuart_dma_tx_use) + temp |= UARTCTRL_TIE; + lpuart32_write(&sport->port, temp, UARTCTRL); +} + +static int lpuart32_startup(struct uart_port *port) +{ + struct lpuart_port *sport = container_of(port, struct lpuart_port, port); + unsigned long flags; + unsigned long temp; + + /* determine FIFO size */ + temp = lpuart32_read(&sport->port, UARTFIFO); + + sport->txfifo_size = UARTFIFO_DEPTH((temp >> UARTFIFO_TXSIZE_OFF) & + UARTFIFO_FIFOSIZE_MASK); + sport->port.fifosize = sport->txfifo_size; + + sport->rxfifo_size = UARTFIFO_DEPTH((temp >> UARTFIFO_RXSIZE_OFF) & + UARTFIFO_FIFOSIZE_MASK); + + /* + * The LS1021A and LS1028A have a fixed FIFO depth of 16 words. + * Although they support the RX/TXSIZE fields, their encoding is + * different. Eg the reference manual states 0b101 is 16 words. + */ + if (is_layerscape_lpuart(sport)) { + sport->rxfifo_size = 16; + sport->txfifo_size = 16; + sport->port.fifosize = sport->txfifo_size; + } + + lpuart_request_dma(sport); + + spin_lock_irqsave(&sport->port.lock, flags); + + lpuart32_setup_watermark_enable(sport); + + lpuart_rx_dma_startup(sport); + lpuart_tx_dma_startup(sport); + + lpuart32_configure(sport); + + spin_unlock_irqrestore(&sport->port.lock, flags); + return 0; +} + +static void lpuart_dma_shutdown(struct lpuart_port *sport) +{ + if (sport->lpuart_dma_rx_use) { + lpuart_dma_rx_free(&sport->port); + sport->lpuart_dma_rx_use = false; + } + + if (sport->lpuart_dma_tx_use) { + if (wait_event_interruptible(sport->dma_wait, + !sport->dma_tx_in_progress) != false) { + sport->dma_tx_in_progress = false; + dmaengine_terminate_all(sport->dma_tx_chan); + } + sport->lpuart_dma_tx_use = false; + } + + if (sport->dma_tx_chan) + dma_release_channel(sport->dma_tx_chan); + if (sport->dma_rx_chan) + dma_release_channel(sport->dma_rx_chan); +} + +static void lpuart_shutdown(struct uart_port *port) +{ + struct lpuart_port *sport = container_of(port, struct lpuart_port, port); + unsigned char temp; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + /* disable Rx/Tx and interrupts */ + temp = readb(port->membase + UARTCR2); + temp &= ~(UARTCR2_TE | UARTCR2_RE | + UARTCR2_TIE | UARTCR2_TCIE | UARTCR2_RIE); + writeb(temp, port->membase + UARTCR2); + + spin_unlock_irqrestore(&port->lock, flags); + + lpuart_dma_shutdown(sport); +} + +static void lpuart32_shutdown(struct uart_port *port) +{ + struct lpuart_port *sport = + container_of(port, struct lpuart_port, port); + unsigned long temp; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + /* disable Rx/Tx and interrupts */ + temp = lpuart32_read(port, UARTCTRL); + temp &= ~(UARTCTRL_TE | UARTCTRL_RE | + UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_RIE); + lpuart32_write(port, temp, UARTCTRL); + + spin_unlock_irqrestore(&port->lock, flags); + + lpuart_dma_shutdown(sport); +} + +static void +lpuart_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct lpuart_port *sport = container_of(port, struct lpuart_port, port); + unsigned long flags; + unsigned char cr1, old_cr1, old_cr2, cr3, cr4, bdh, modem; + unsigned int baud; + unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; + unsigned int sbr, brfa; + + cr1 = old_cr1 = readb(sport->port.membase + UARTCR1); + old_cr2 = readb(sport->port.membase + UARTCR2); + cr3 = readb(sport->port.membase + UARTCR3); + cr4 = readb(sport->port.membase + UARTCR4); + bdh = readb(sport->port.membase + UARTBDH); + modem = readb(sport->port.membase + UARTMODEM); + /* + * only support CS8 and CS7, and for CS7 must enable PE. + * supported mode: + * - (7,e/o,1) + * - (8,n,1) + * - (8,m/s,1) + * - (8,e/o,1) + */ + while ((termios->c_cflag & CSIZE) != CS8 && + (termios->c_cflag & CSIZE) != CS7) { + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= old_csize; + old_csize = CS8; + } + + if ((termios->c_cflag & CSIZE) == CS8 || + (termios->c_cflag & CSIZE) == CS7) + cr1 = old_cr1 & ~UARTCR1_M; + + if (termios->c_cflag & CMSPAR) { + if ((termios->c_cflag & CSIZE) != CS8) { + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= CS8; + } + cr1 |= UARTCR1_M; + } + + /* + * When auto RS-485 RTS mode is enabled, + * hardware flow control need to be disabled. + */ + if (sport->port.rs485.flags & SER_RS485_ENABLED) + termios->c_cflag &= ~CRTSCTS; + + if (termios->c_cflag & CRTSCTS) + modem |= UARTMODEM_RXRTSE | UARTMODEM_TXCTSE; + else + modem &= ~(UARTMODEM_RXRTSE | UARTMODEM_TXCTSE); + + termios->c_cflag &= ~CSTOPB; + + /* parity must be enabled when CS7 to match 8-bits format */ + if ((termios->c_cflag & CSIZE) == CS7) + termios->c_cflag |= PARENB; + + if (termios->c_cflag & PARENB) { + if (termios->c_cflag & CMSPAR) { + cr1 &= ~UARTCR1_PE; + if (termios->c_cflag & PARODD) + cr3 |= UARTCR3_T8; + else + cr3 &= ~UARTCR3_T8; + } else { + cr1 |= UARTCR1_PE; + if ((termios->c_cflag & CSIZE) == CS8) + cr1 |= UARTCR1_M; + if (termios->c_cflag & PARODD) + cr1 |= UARTCR1_PT; + else + cr1 &= ~UARTCR1_PT; + } + } else { + cr1 &= ~UARTCR1_PE; + } + + /* ask the core to calculate the divisor */ + baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16); + + /* + * Need to update the Ring buffer length according to the selected + * baud rate and restart Rx DMA path. + * + * Since timer function acqures sport->port.lock, need to stop before + * acquring same lock because otherwise del_timer_sync() can deadlock. + */ + if (old && sport->lpuart_dma_rx_use) + lpuart_dma_rx_free(&sport->port); + + spin_lock_irqsave(&sport->port.lock, flags); + + sport->port.read_status_mask = 0; + if (termios->c_iflag & INPCK) + sport->port.read_status_mask |= UARTSR1_FE | UARTSR1_PE; + if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) + sport->port.read_status_mask |= UARTSR1_FE; + + /* characters to ignore */ + sport->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + sport->port.ignore_status_mask |= UARTSR1_PE; + if (termios->c_iflag & IGNBRK) { + sport->port.ignore_status_mask |= UARTSR1_FE; + /* + * if we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + sport->port.ignore_status_mask |= UARTSR1_OR; + } + + /* update the per-port timeout */ + uart_update_timeout(port, termios->c_cflag, baud); + + /* wait transmit engin complete */ + lpuart_wait_bit_set(&sport->port, UARTSR1, UARTSR1_TC); + + /* disable transmit and receive */ + writeb(old_cr2 & ~(UARTCR2_TE | UARTCR2_RE), + sport->port.membase + UARTCR2); + + sbr = sport->port.uartclk / (16 * baud); + brfa = ((sport->port.uartclk - (16 * sbr * baud)) * 2) / baud; + bdh &= ~UARTBDH_SBR_MASK; + bdh |= (sbr >> 8) & 0x1F; + cr4 &= ~UARTCR4_BRFA_MASK; + brfa &= UARTCR4_BRFA_MASK; + writeb(cr4 | brfa, sport->port.membase + UARTCR4); + writeb(bdh, sport->port.membase + UARTBDH); + writeb(sbr & 0xFF, sport->port.membase + UARTBDL); + writeb(cr3, sport->port.membase + UARTCR3); + writeb(cr1, sport->port.membase + UARTCR1); + writeb(modem, sport->port.membase + UARTMODEM); + + /* restore control register */ + writeb(old_cr2, sport->port.membase + UARTCR2); + + if (old && sport->lpuart_dma_rx_use) { + if (!lpuart_start_rx_dma(sport)) + rx_dma_timer_init(sport); + else + sport->lpuart_dma_rx_use = false; + } + + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +static void __lpuart32_serial_setbrg(struct uart_port *port, + unsigned int baudrate, bool use_rx_dma, + bool use_tx_dma) +{ + u32 sbr, osr, baud_diff, tmp_osr, tmp_sbr, tmp_diff, tmp; + u32 clk = port->uartclk; + + /* + * The idea is to use the best OSR (over-sampling rate) possible. + * Note, OSR is typically hard-set to 16 in other LPUART instantiations. + * Loop to find the best OSR value possible, one that generates minimum + * baud_diff iterate through the rest of the supported values of OSR. + * + * Calculation Formula: + * Baud Rate = baud clock / ((OSR+1) × SBR) + */ + baud_diff = baudrate; + osr = 0; + sbr = 0; + + for (tmp_osr = 4; tmp_osr <= 32; tmp_osr++) { + /* calculate the temporary sbr value */ + tmp_sbr = (clk / (baudrate * tmp_osr)); + if (tmp_sbr == 0) + tmp_sbr = 1; + + /* + * calculate the baud rate difference based on the temporary + * osr and sbr values + */ + tmp_diff = clk / (tmp_osr * tmp_sbr) - baudrate; + + /* select best values between sbr and sbr+1 */ + tmp = clk / (tmp_osr * (tmp_sbr + 1)); + if (tmp_diff > (baudrate - tmp)) { + tmp_diff = baudrate - tmp; + tmp_sbr++; + } + + if (tmp_sbr > UARTBAUD_SBR_MASK) + continue; + + if (tmp_diff <= baud_diff) { + baud_diff = tmp_diff; + osr = tmp_osr; + sbr = tmp_sbr; + + if (!baud_diff) + break; + } + } + + /* handle buadrate outside acceptable rate */ + if (baud_diff > ((baudrate / 100) * 3)) + dev_warn(port->dev, + "unacceptable baud rate difference of more than 3%%\n"); + + tmp = lpuart32_read(port, UARTBAUD); + + if ((osr > 3) && (osr < 8)) + tmp |= UARTBAUD_BOTHEDGE; + + tmp &= ~(UARTBAUD_OSR_MASK << UARTBAUD_OSR_SHIFT); + tmp |= ((osr-1) & UARTBAUD_OSR_MASK) << UARTBAUD_OSR_SHIFT; + + tmp &= ~UARTBAUD_SBR_MASK; + tmp |= sbr & UARTBAUD_SBR_MASK; + + if (!use_rx_dma) + tmp &= ~UARTBAUD_RDMAE; + if (!use_tx_dma) + tmp &= ~UARTBAUD_TDMAE; + + lpuart32_write(port, tmp, UARTBAUD); +} + +static void lpuart32_serial_setbrg(struct lpuart_port *sport, + unsigned int baudrate) +{ + __lpuart32_serial_setbrg(&sport->port, baudrate, + sport->lpuart_dma_rx_use, + sport->lpuart_dma_tx_use); +} + + +static void +lpuart32_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct lpuart_port *sport = container_of(port, struct lpuart_port, port); + unsigned long flags; + unsigned long ctrl, old_ctrl, modem; + unsigned int baud; + unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; + + ctrl = old_ctrl = lpuart32_read(&sport->port, UARTCTRL); + modem = lpuart32_read(&sport->port, UARTMODIR); + /* + * only support CS8 and CS7, and for CS7 must enable PE. + * supported mode: + * - (7,e/o,1) + * - (8,n,1) + * - (8,m/s,1) + * - (8,e/o,1) + */ + while ((termios->c_cflag & CSIZE) != CS8 && + (termios->c_cflag & CSIZE) != CS7) { + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= old_csize; + old_csize = CS8; + } + + if ((termios->c_cflag & CSIZE) == CS8 || + (termios->c_cflag & CSIZE) == CS7) + ctrl = old_ctrl & ~UARTCTRL_M; + + if (termios->c_cflag & CMSPAR) { + if ((termios->c_cflag & CSIZE) != CS8) { + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= CS8; + } + ctrl |= UARTCTRL_M; + } + + /* + * When auto RS-485 RTS mode is enabled, + * hardware flow control need to be disabled. + */ + if (sport->port.rs485.flags & SER_RS485_ENABLED) + termios->c_cflag &= ~CRTSCTS; + + if (termios->c_cflag & CRTSCTS) { + modem |= (UARTMODIR_RXRTSE | UARTMODIR_TXCTSE); + } else { + termios->c_cflag &= ~CRTSCTS; + modem &= ~(UARTMODIR_RXRTSE | UARTMODIR_TXCTSE); + } + + if (termios->c_cflag & CSTOPB) + termios->c_cflag &= ~CSTOPB; + + /* parity must be enabled when CS7 to match 8-bits format */ + if ((termios->c_cflag & CSIZE) == CS7) + termios->c_cflag |= PARENB; + + if ((termios->c_cflag & PARENB)) { + if (termios->c_cflag & CMSPAR) { + ctrl &= ~UARTCTRL_PE; + ctrl |= UARTCTRL_M; + } else { + ctrl |= UARTCTRL_PE; + if ((termios->c_cflag & CSIZE) == CS8) + ctrl |= UARTCTRL_M; + if (termios->c_cflag & PARODD) + ctrl |= UARTCTRL_PT; + else + ctrl &= ~UARTCTRL_PT; + } + } else { + ctrl &= ~UARTCTRL_PE; + } + + /* ask the core to calculate the divisor */ + baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 4); + + /* + * Need to update the Ring buffer length according to the selected + * baud rate and restart Rx DMA path. + * + * Since timer function acqures sport->port.lock, need to stop before + * acquring same lock because otherwise del_timer_sync() can deadlock. + */ + if (old && sport->lpuart_dma_rx_use) + lpuart_dma_rx_free(&sport->port); + + spin_lock_irqsave(&sport->port.lock, flags); + + sport->port.read_status_mask = 0; + if (termios->c_iflag & INPCK) + sport->port.read_status_mask |= UARTSTAT_FE | UARTSTAT_PE; + if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) + sport->port.read_status_mask |= UARTSTAT_FE; + + /* characters to ignore */ + sport->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + sport->port.ignore_status_mask |= UARTSTAT_PE; + if (termios->c_iflag & IGNBRK) { + sport->port.ignore_status_mask |= UARTSTAT_FE; + /* + * if we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + sport->port.ignore_status_mask |= UARTSTAT_OR; + } + + /* update the per-port timeout */ + uart_update_timeout(port, termios->c_cflag, baud); + + /* + * LPUART Transmission Complete Flag may never be set while queuing a break + * character, so skip waiting for transmission complete when UARTCTRL_SBK is + * asserted. + */ + if (!(old_ctrl & UARTCTRL_SBK)) { + lpuart32_write(&sport->port, 0, UARTMODIR); + lpuart32_wait_bit_set(&sport->port, UARTSTAT, UARTSTAT_TC); + } + + /* disable transmit and receive */ + lpuart32_write(&sport->port, old_ctrl & ~(UARTCTRL_TE | UARTCTRL_RE), + UARTCTRL); + + lpuart32_serial_setbrg(sport, baud); + lpuart32_write(&sport->port, modem, UARTMODIR); + lpuart32_write(&sport->port, ctrl, UARTCTRL); + /* restore control register */ + + if (old && sport->lpuart_dma_rx_use) { + if (!lpuart_start_rx_dma(sport)) + rx_dma_timer_init(sport); + else + sport->lpuart_dma_rx_use = false; + } + + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +static const char *lpuart_type(struct uart_port *port) +{ + return "FSL_LPUART"; +} + +static void lpuart_release_port(struct uart_port *port) +{ + /* nothing to do */ +} + +static int lpuart_request_port(struct uart_port *port) +{ + return 0; +} + +/* configure/autoconfigure the port */ +static void lpuart_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) + port->type = PORT_LPUART; +} + +static int lpuart_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + int ret = 0; + + if (ser->type != PORT_UNKNOWN && ser->type != PORT_LPUART) + ret = -EINVAL; + if (port->irq != ser->irq) + ret = -EINVAL; + if (ser->io_type != UPIO_MEM) + ret = -EINVAL; + if (port->uartclk / 16 != ser->baud_base) + ret = -EINVAL; + if (port->iobase != ser->port) + ret = -EINVAL; + if (ser->hub6 != 0) + ret = -EINVAL; + return ret; +} + +static const struct uart_ops lpuart_pops = { + .tx_empty = lpuart_tx_empty, + .set_mctrl = lpuart_set_mctrl, + .get_mctrl = lpuart_get_mctrl, + .stop_tx = lpuart_stop_tx, + .start_tx = lpuart_start_tx, + .stop_rx = lpuart_stop_rx, + .break_ctl = lpuart_break_ctl, + .startup = lpuart_startup, + .shutdown = lpuart_shutdown, + .set_termios = lpuart_set_termios, + .type = lpuart_type, + .request_port = lpuart_request_port, + .release_port = lpuart_release_port, + .config_port = lpuart_config_port, + .verify_port = lpuart_verify_port, + .flush_buffer = lpuart_flush_buffer, +#if defined(CONFIG_CONSOLE_POLL) + .poll_init = lpuart_poll_init, + .poll_get_char = lpuart_poll_get_char, + .poll_put_char = lpuart_poll_put_char, +#endif +}; + +static const struct uart_ops lpuart32_pops = { + .tx_empty = lpuart32_tx_empty, + .set_mctrl = lpuart32_set_mctrl, + .get_mctrl = lpuart32_get_mctrl, + .stop_tx = lpuart32_stop_tx, + .start_tx = lpuart32_start_tx, + .stop_rx = lpuart32_stop_rx, + .break_ctl = lpuart32_break_ctl, + .startup = lpuart32_startup, + .shutdown = lpuart32_shutdown, + .set_termios = lpuart32_set_termios, + .type = lpuart_type, + .request_port = lpuart_request_port, + .release_port = lpuart_release_port, + .config_port = lpuart_config_port, + .verify_port = lpuart_verify_port, + .flush_buffer = lpuart_flush_buffer, +#if defined(CONFIG_CONSOLE_POLL) + .poll_init = lpuart32_poll_init, + .poll_get_char = lpuart32_poll_get_char, + .poll_put_char = lpuart32_poll_put_char, +#endif +}; + +static struct lpuart_port *lpuart_ports[UART_NR]; + +#ifdef CONFIG_SERIAL_FSL_LPUART_CONSOLE +static void lpuart_console_putchar(struct uart_port *port, int ch) +{ + lpuart_wait_bit_set(port, UARTSR1, UARTSR1_TDRE); + writeb(ch, port->membase + UARTDR); +} + +static void lpuart32_console_putchar(struct uart_port *port, int ch) +{ + lpuart32_wait_bit_set(port, UARTSTAT, UARTSTAT_TDRE); + lpuart32_write(port, ch, UARTDATA); +} + +static void +lpuart_console_write(struct console *co, const char *s, unsigned int count) +{ + struct lpuart_port *sport = lpuart_ports[co->index]; + unsigned char old_cr2, cr2; + unsigned long flags; + int locked = 1; + + if (sport->port.sysrq || oops_in_progress) + locked = spin_trylock_irqsave(&sport->port.lock, flags); + else + spin_lock_irqsave(&sport->port.lock, flags); + + /* first save CR2 and then disable interrupts */ + cr2 = old_cr2 = readb(sport->port.membase + UARTCR2); + cr2 |= UARTCR2_TE | UARTCR2_RE; + cr2 &= ~(UARTCR2_TIE | UARTCR2_TCIE | UARTCR2_RIE); + writeb(cr2, sport->port.membase + UARTCR2); + + uart_console_write(&sport->port, s, count, lpuart_console_putchar); + + /* wait for transmitter finish complete and restore CR2 */ + lpuart_wait_bit_set(&sport->port, UARTSR1, UARTSR1_TC); + + writeb(old_cr2, sport->port.membase + UARTCR2); + + if (locked) + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +static void +lpuart32_console_write(struct console *co, const char *s, unsigned int count) +{ + struct lpuart_port *sport = lpuart_ports[co->index]; + unsigned long old_cr, cr; + unsigned long flags; + int locked = 1; + + if (sport->port.sysrq || oops_in_progress) + locked = spin_trylock_irqsave(&sport->port.lock, flags); + else + spin_lock_irqsave(&sport->port.lock, flags); + + /* first save CR2 and then disable interrupts */ + cr = old_cr = lpuart32_read(&sport->port, UARTCTRL); + cr |= UARTCTRL_TE | UARTCTRL_RE; + cr &= ~(UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_RIE); + lpuart32_write(&sport->port, cr, UARTCTRL); + + uart_console_write(&sport->port, s, count, lpuart32_console_putchar); + + /* wait for transmitter finish complete and restore CR2 */ + lpuart32_wait_bit_set(&sport->port, UARTSTAT, UARTSTAT_TC); + + lpuart32_write(&sport->port, old_cr, UARTCTRL); + + if (locked) + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +/* + * if the port was already initialised (eg, by a boot loader), + * try to determine the current setup. + */ +static void __init +lpuart_console_get_options(struct lpuart_port *sport, int *baud, + int *parity, int *bits) +{ + unsigned char cr, bdh, bdl, brfa; + unsigned int sbr, uartclk, baud_raw; + + cr = readb(sport->port.membase + UARTCR2); + cr &= UARTCR2_TE | UARTCR2_RE; + if (!cr) + return; + + /* ok, the port was enabled */ + + cr = readb(sport->port.membase + UARTCR1); + + *parity = 'n'; + if (cr & UARTCR1_PE) { + if (cr & UARTCR1_PT) + *parity = 'o'; + else + *parity = 'e'; + } + + if (cr & UARTCR1_M) + *bits = 9; + else + *bits = 8; + + bdh = readb(sport->port.membase + UARTBDH); + bdh &= UARTBDH_SBR_MASK; + bdl = readb(sport->port.membase + UARTBDL); + sbr = bdh; + sbr <<= 8; + sbr |= bdl; + brfa = readb(sport->port.membase + UARTCR4); + brfa &= UARTCR4_BRFA_MASK; + + uartclk = lpuart_get_baud_clk_rate(sport); + /* + * baud = mod_clk/(16*(sbr[13]+(brfa)/32) + */ + baud_raw = uartclk / (16 * (sbr + brfa / 32)); + + if (*baud != baud_raw) + dev_info(sport->port.dev, "Serial: Console lpuart rounded baud rate" + "from %d to %d\n", baud_raw, *baud); +} + +static void __init +lpuart32_console_get_options(struct lpuart_port *sport, int *baud, + int *parity, int *bits) +{ + unsigned long cr, bd; + unsigned int sbr, uartclk, baud_raw; + + cr = lpuart32_read(&sport->port, UARTCTRL); + cr &= UARTCTRL_TE | UARTCTRL_RE; + if (!cr) + return; + + /* ok, the port was enabled */ + + cr = lpuart32_read(&sport->port, UARTCTRL); + + *parity = 'n'; + if (cr & UARTCTRL_PE) { + if (cr & UARTCTRL_PT) + *parity = 'o'; + else + *parity = 'e'; + } + + if (cr & UARTCTRL_M) + *bits = 9; + else + *bits = 8; + + bd = lpuart32_read(&sport->port, UARTBAUD); + bd &= UARTBAUD_SBR_MASK; + if (!bd) + return; + + sbr = bd; + uartclk = lpuart_get_baud_clk_rate(sport); + /* + * baud = mod_clk/(16*(sbr[13]+(brfa)/32) + */ + baud_raw = uartclk / (16 * sbr); + + if (*baud != baud_raw) + dev_info(sport->port.dev, "Serial: Console lpuart rounded baud rate" + "from %d to %d\n", baud_raw, *baud); +} + +static int __init lpuart_console_setup(struct console *co, char *options) +{ + struct lpuart_port *sport; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index == -1 || co->index >= ARRAY_SIZE(lpuart_ports)) + co->index = 0; + + sport = lpuart_ports[co->index]; + if (sport == NULL) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + if (lpuart_is_32(sport)) + lpuart32_console_get_options(sport, &baud, &parity, &bits); + else + lpuart_console_get_options(sport, &baud, &parity, &bits); + + if (lpuart_is_32(sport)) + lpuart32_setup_watermark(sport); + else + lpuart_setup_watermark(sport); + + return uart_set_options(&sport->port, co, baud, parity, bits, flow); +} + +static struct uart_driver lpuart_reg; +static struct console lpuart_console = { + .name = DEV_NAME, + .write = lpuart_console_write, + .device = uart_console_device, + .setup = lpuart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &lpuart_reg, +}; + +static struct console lpuart32_console = { + .name = DEV_NAME, + .write = lpuart32_console_write, + .device = uart_console_device, + .setup = lpuart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &lpuart_reg, +}; + +static void lpuart_early_write(struct console *con, const char *s, unsigned n) +{ + struct earlycon_device *dev = con->data; + + uart_console_write(&dev->port, s, n, lpuart_console_putchar); +} + +static void lpuart32_early_write(struct console *con, const char *s, unsigned n) +{ + struct earlycon_device *dev = con->data; + + uart_console_write(&dev->port, s, n, lpuart32_console_putchar); +} + +static int __init lpuart_early_console_setup(struct earlycon_device *device, + const char *opt) +{ + if (!device->port.membase) + return -ENODEV; + + device->con->write = lpuart_early_write; + return 0; +} + +static int __init lpuart32_early_console_setup(struct earlycon_device *device, + const char *opt) +{ + if (!device->port.membase) + return -ENODEV; + + if (device->port.iotype != UPIO_MEM32) + device->port.iotype = UPIO_MEM32BE; + + device->con->write = lpuart32_early_write; + return 0; +} + +static int __init ls1028a_early_console_setup(struct earlycon_device *device, + const char *opt) +{ + u32 cr; + + if (!device->port.membase) + return -ENODEV; + + device->port.iotype = UPIO_MEM32; + device->con->write = lpuart32_early_write; + + /* set the baudrate */ + if (device->port.uartclk && device->baud) + __lpuart32_serial_setbrg(&device->port, device->baud, + false, false); + + /* enable transmitter */ + cr = lpuart32_read(&device->port, UARTCTRL); + cr |= UARTCTRL_TE; + lpuart32_write(&device->port, cr, UARTCTRL); + + return 0; +} + +static int __init lpuart32_imx_early_console_setup(struct earlycon_device *device, + const char *opt) +{ + if (!device->port.membase) + return -ENODEV; + + device->port.iotype = UPIO_MEM32; + device->port.membase += IMX_REG_OFF; + device->con->write = lpuart32_early_write; + + return 0; +} +OF_EARLYCON_DECLARE(lpuart, "fsl,vf610-lpuart", lpuart_early_console_setup); +OF_EARLYCON_DECLARE(lpuart32, "fsl,ls1021a-lpuart", lpuart32_early_console_setup); +OF_EARLYCON_DECLARE(lpuart32, "fsl,ls1028a-lpuart", ls1028a_early_console_setup); +OF_EARLYCON_DECLARE(lpuart32, "fsl,imx7ulp-lpuart", lpuart32_imx_early_console_setup); +OF_EARLYCON_DECLARE(lpuart32, "fsl,imx8ulp-lpuart", lpuart32_imx_early_console_setup); +OF_EARLYCON_DECLARE(lpuart32, "fsl,imx8qxp-lpuart", lpuart32_imx_early_console_setup); +EARLYCON_DECLARE(lpuart, lpuart_early_console_setup); +EARLYCON_DECLARE(lpuart32, lpuart32_early_console_setup); + +#define LPUART_CONSOLE (&lpuart_console) +#define LPUART32_CONSOLE (&lpuart32_console) +#else +#define LPUART_CONSOLE NULL +#define LPUART32_CONSOLE NULL +#endif + +static struct uart_driver lpuart_reg = { + .owner = THIS_MODULE, + .driver_name = DRIVER_NAME, + .dev_name = DEV_NAME, + .nr = ARRAY_SIZE(lpuart_ports), + .cons = LPUART_CONSOLE, +}; + +static int lpuart_probe(struct platform_device *pdev) +{ + const struct of_device_id *of_id = of_match_device(lpuart_dt_ids, + &pdev->dev); + const struct lpuart_soc_data *sdata = of_id->data; + struct device_node *np = pdev->dev.of_node; + struct lpuart_port *sport; + struct resource *res; + irq_handler_t handler; + int ret; + + sport = devm_kzalloc(&pdev->dev, sizeof(*sport), GFP_KERNEL); + if (!sport) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + sport->port.membase = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(sport->port.membase)) + return PTR_ERR(sport->port.membase); + + sport->port.membase += sdata->reg_off; + sport->port.mapbase = res->start + sdata->reg_off; + sport->port.dev = &pdev->dev; + sport->port.type = PORT_LPUART; + sport->devtype = sdata->devtype; + ret = platform_get_irq(pdev, 0); + if (ret < 0) + return ret; + sport->port.irq = ret; + sport->port.iotype = sdata->iotype; + if (lpuart_is_32(sport)) + sport->port.ops = &lpuart32_pops; + else + sport->port.ops = &lpuart_pops; + sport->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_FSL_LPUART_CONSOLE); + sport->port.flags = UPF_BOOT_AUTOCONF; + + if (lpuart_is_32(sport)) + sport->port.rs485_config = lpuart32_config_rs485; + else + sport->port.rs485_config = lpuart_config_rs485; + + sport->ipg_clk = devm_clk_get(&pdev->dev, "ipg"); + if (IS_ERR(sport->ipg_clk)) { + ret = PTR_ERR(sport->ipg_clk); + dev_err(&pdev->dev, "failed to get uart ipg clk: %d\n", ret); + return ret; + } + + sport->baud_clk = NULL; + if (is_imx8qxp_lpuart(sport)) { + sport->baud_clk = devm_clk_get(&pdev->dev, "baud"); + if (IS_ERR(sport->baud_clk)) { + ret = PTR_ERR(sport->baud_clk); + dev_err(&pdev->dev, "failed to get uart baud clk: %d\n", ret); + return ret; + } + } + + ret = of_alias_get_id(np, "serial"); + if (ret < 0) { + dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret); + return ret; + } + if (ret >= ARRAY_SIZE(lpuart_ports)) { + dev_err(&pdev->dev, "serial%d out of range\n", ret); + return -EINVAL; + } + sport->port.line = ret; + + ret = lpuart_enable_clks(sport); + if (ret) + return ret; + sport->port.uartclk = lpuart_get_baud_clk_rate(sport); + + lpuart_ports[sport->port.line] = sport; + + platform_set_drvdata(pdev, &sport->port); + + if (lpuart_is_32(sport)) { + lpuart_reg.cons = LPUART32_CONSOLE; + handler = lpuart32_int; + } else { + lpuart_reg.cons = LPUART_CONSOLE; + handler = lpuart_int; + } + + ret = uart_get_rs485_mode(&sport->port); + if (ret) + goto failed_get_rs485; + + if (sport->port.rs485.flags & SER_RS485_RX_DURING_TX) + dev_err(&pdev->dev, "driver doesn't support RX during TX\n"); + + if (sport->port.rs485.delay_rts_before_send || + sport->port.rs485.delay_rts_after_send) + dev_err(&pdev->dev, "driver doesn't support RTS delays\n"); + + ret = uart_add_one_port(&lpuart_reg, &sport->port); + if (ret) + goto failed_attach_port; + + ret = devm_request_irq(&pdev->dev, sport->port.irq, handler, 0, + DRIVER_NAME, sport); + if (ret) + goto failed_irq_request; + + return 0; + +failed_irq_request: + uart_remove_one_port(&lpuart_reg, &sport->port); +failed_get_rs485: +failed_attach_port: + lpuart_disable_clks(sport); + return ret; +} + +static int lpuart_remove(struct platform_device *pdev) +{ + struct lpuart_port *sport = platform_get_drvdata(pdev); + + uart_remove_one_port(&lpuart_reg, &sport->port); + + lpuart_disable_clks(sport); + + if (sport->dma_tx_chan) + dma_release_channel(sport->dma_tx_chan); + + if (sport->dma_rx_chan) + dma_release_channel(sport->dma_rx_chan); + + return 0; +} + +static int __maybe_unused lpuart_suspend(struct device *dev) +{ + struct lpuart_port *sport = dev_get_drvdata(dev); + unsigned long temp; + bool irq_wake; + + if (lpuart_is_32(sport)) { + /* disable Rx/Tx and interrupts */ + temp = lpuart32_read(&sport->port, UARTCTRL); + temp &= ~(UARTCTRL_TE | UARTCTRL_TIE | UARTCTRL_TCIE); + lpuart32_write(&sport->port, temp, UARTCTRL); + } else { + /* disable Rx/Tx and interrupts */ + temp = readb(sport->port.membase + UARTCR2); + temp &= ~(UARTCR2_TE | UARTCR2_TIE | UARTCR2_TCIE); + writeb(temp, sport->port.membase + UARTCR2); + } + + uart_suspend_port(&lpuart_reg, &sport->port); + + /* uart_suspend_port() might set wakeup flag */ + irq_wake = irqd_is_wakeup_set(irq_get_irq_data(sport->port.irq)); + + if (sport->lpuart_dma_rx_use) { + /* + * EDMA driver during suspend will forcefully release any + * non-idle DMA channels. If port wakeup is enabled or if port + * is console port or 'no_console_suspend' is set the Rx DMA + * cannot resume as expected, hence gracefully release the + * Rx DMA path before suspend and start Rx DMA path on resume. + */ + if (irq_wake) { + lpuart_dma_rx_free(&sport->port); + } + + /* Disable Rx DMA to use UART port as wakeup source */ + if (lpuart_is_32(sport)) { + temp = lpuart32_read(&sport->port, UARTBAUD); + lpuart32_write(&sport->port, temp & ~UARTBAUD_RDMAE, + UARTBAUD); + } else { + writeb(readb(sport->port.membase + UARTCR5) & + ~UARTCR5_RDMAS, sport->port.membase + UARTCR5); + } + } + + if (sport->lpuart_dma_tx_use) { + sport->dma_tx_in_progress = false; + dmaengine_terminate_all(sport->dma_tx_chan); + } + + if (sport->port.suspended && !irq_wake) + lpuart_disable_clks(sport); + + return 0; +} + +static int __maybe_unused lpuart_resume(struct device *dev) +{ + struct lpuart_port *sport = dev_get_drvdata(dev); + bool irq_wake = irqd_is_wakeup_set(irq_get_irq_data(sport->port.irq)); + + if (sport->port.suspended && !irq_wake) + lpuart_enable_clks(sport); + + if (lpuart_is_32(sport)) + lpuart32_setup_watermark_enable(sport); + else + lpuart_setup_watermark_enable(sport); + + if (sport->lpuart_dma_rx_use) { + if (irq_wake) { + if (!lpuart_start_rx_dma(sport)) + rx_dma_timer_init(sport); + else + sport->lpuart_dma_rx_use = false; + } + } + + lpuart_tx_dma_startup(sport); + + if (lpuart_is_32(sport)) + lpuart32_configure(sport); + + uart_resume_port(&lpuart_reg, &sport->port); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(lpuart_pm_ops, lpuart_suspend, lpuart_resume); + +static struct platform_driver lpuart_driver = { + .probe = lpuart_probe, + .remove = lpuart_remove, + .driver = { + .name = "fsl-lpuart", + .of_match_table = lpuart_dt_ids, + .pm = &lpuart_pm_ops, + }, +}; + +static int __init lpuart_serial_init(void) +{ + int ret = uart_register_driver(&lpuart_reg); + + if (ret) + return ret; + + ret = platform_driver_register(&lpuart_driver); + if (ret) + uart_unregister_driver(&lpuart_reg); + + return ret; +} + +static void __exit lpuart_serial_exit(void) +{ + platform_driver_unregister(&lpuart_driver); + uart_unregister_driver(&lpuart_reg); +} + +module_init(lpuart_serial_init); +module_exit(lpuart_serial_exit); + +MODULE_DESCRIPTION("Freescale lpuart serial port driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c new file mode 100644 index 000000000..74b325c34 --- /dev/null +++ b/drivers/tty/serial/icom.c @@ -0,0 +1,1649 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * icom.c + * + * Copyright (C) 2001 IBM Corporation. All rights reserved. + * + * Serial device driver. + * + * Based on code from serial.c + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "icom.h" + +/*#define ICOM_TRACE enable port trace capabilities */ + +#define ICOM_DRIVER_NAME "icom" +#define ICOM_VERSION_STR "1.3.1" +#define NR_PORTS 128 +#define ICOM_PORT ((struct icom_port *)port) +#define to_icom_adapter(d) container_of(d, struct icom_adapter, kref) + +static const struct pci_device_id icom_pci_table[] = { + { + .vendor = PCI_VENDOR_ID_IBM, + .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_1, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = ADAPTER_V1, + }, + { + .vendor = PCI_VENDOR_ID_IBM, + .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, + .subvendor = PCI_VENDOR_ID_IBM, + .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_TWO_PORTS_RVX, + .driver_data = ADAPTER_V2, + }, + { + .vendor = PCI_VENDOR_ID_IBM, + .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, + .subvendor = PCI_VENDOR_ID_IBM, + .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM, + .driver_data = ADAPTER_V2, + }, + { + .vendor = PCI_VENDOR_ID_IBM, + .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, + .subvendor = PCI_VENDOR_ID_IBM, + .subdevice = PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL, + .driver_data = ADAPTER_V2, + }, + { + .vendor = PCI_VENDOR_ID_IBM, + .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, + .subvendor = PCI_VENDOR_ID_IBM, + .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM_PCIE, + .driver_data = ADAPTER_V2, + }, + {} +}; + +static struct lookup_proc_table start_proc[4] = { + {NULL, ICOM_CONTROL_START_A}, + {NULL, ICOM_CONTROL_START_B}, + {NULL, ICOM_CONTROL_START_C}, + {NULL, ICOM_CONTROL_START_D} +}; + + +static struct lookup_proc_table stop_proc[4] = { + {NULL, ICOM_CONTROL_STOP_A}, + {NULL, ICOM_CONTROL_STOP_B}, + {NULL, ICOM_CONTROL_STOP_C}, + {NULL, ICOM_CONTROL_STOP_D} +}; + +static struct lookup_int_table int_mask_tbl[4] = { + {NULL, ICOM_INT_MASK_PRC_A}, + {NULL, ICOM_INT_MASK_PRC_B}, + {NULL, ICOM_INT_MASK_PRC_C}, + {NULL, ICOM_INT_MASK_PRC_D}, +}; + + +MODULE_DEVICE_TABLE(pci, icom_pci_table); + +static LIST_HEAD(icom_adapter_head); + +/* spinlock for adapter initialization and changing adapter operations */ +static spinlock_t icom_lock; + +#ifdef ICOM_TRACE +static inline void trace(struct icom_port *icom_port, char *trace_pt, + unsigned long trace_data) +{ + dev_info(&icom_port->adapter->pci_dev->dev, ":%d:%s - %lx\n", + icom_port->port, trace_pt, trace_data); +} +#else +static inline void trace(struct icom_port *icom_port, char *trace_pt, unsigned long trace_data) {}; +#endif +static void icom_kref_release(struct kref *kref); + +static void free_port_memory(struct icom_port *icom_port) +{ + struct pci_dev *dev = icom_port->adapter->pci_dev; + + trace(icom_port, "RET_PORT_MEM", 0); + if (icom_port->recv_buf) { + dma_free_coherent(&dev->dev, 4096, icom_port->recv_buf, + icom_port->recv_buf_pci); + icom_port->recv_buf = NULL; + } + if (icom_port->xmit_buf) { + dma_free_coherent(&dev->dev, 4096, icom_port->xmit_buf, + icom_port->xmit_buf_pci); + icom_port->xmit_buf = NULL; + } + if (icom_port->statStg) { + dma_free_coherent(&dev->dev, 4096, icom_port->statStg, + icom_port->statStg_pci); + icom_port->statStg = NULL; + } + + if (icom_port->xmitRestart) { + dma_free_coherent(&dev->dev, 4096, icom_port->xmitRestart, + icom_port->xmitRestart_pci); + icom_port->xmitRestart = NULL; + } +} + +static int get_port_memory(struct icom_port *icom_port) +{ + int index; + unsigned long stgAddr; + unsigned long startStgAddr; + unsigned long offset; + struct pci_dev *dev = icom_port->adapter->pci_dev; + + icom_port->xmit_buf = + dma_alloc_coherent(&dev->dev, 4096, &icom_port->xmit_buf_pci, + GFP_KERNEL); + if (!icom_port->xmit_buf) { + dev_err(&dev->dev, "Can not allocate Transmit buffer\n"); + return -ENOMEM; + } + + trace(icom_port, "GET_PORT_MEM", + (unsigned long) icom_port->xmit_buf); + + icom_port->recv_buf = + dma_alloc_coherent(&dev->dev, 4096, &icom_port->recv_buf_pci, + GFP_KERNEL); + if (!icom_port->recv_buf) { + dev_err(&dev->dev, "Can not allocate Receive buffer\n"); + free_port_memory(icom_port); + return -ENOMEM; + } + trace(icom_port, "GET_PORT_MEM", + (unsigned long) icom_port->recv_buf); + + icom_port->statStg = + dma_alloc_coherent(&dev->dev, 4096, &icom_port->statStg_pci, + GFP_KERNEL); + if (!icom_port->statStg) { + dev_err(&dev->dev, "Can not allocate Status buffer\n"); + free_port_memory(icom_port); + return -ENOMEM; + } + trace(icom_port, "GET_PORT_MEM", + (unsigned long) icom_port->statStg); + + icom_port->xmitRestart = + dma_alloc_coherent(&dev->dev, 4096, &icom_port->xmitRestart_pci, + GFP_KERNEL); + if (!icom_port->xmitRestart) { + dev_err(&dev->dev, + "Can not allocate xmit Restart buffer\n"); + free_port_memory(icom_port); + return -ENOMEM; + } + + /* FODs: Frame Out Descriptor Queue, this is a FIFO queue that + indicates that frames are to be transmitted + */ + + stgAddr = (unsigned long) icom_port->statStg; + for (index = 0; index < NUM_XBUFFS; index++) { + trace(icom_port, "FOD_ADDR", stgAddr); + stgAddr = stgAddr + sizeof(icom_port->statStg->xmit[0]); + if (index < (NUM_XBUFFS - 1)) { + memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area)); + icom_port->statStg->xmit[index].leLengthASD = + (unsigned short int) cpu_to_le16(XMIT_BUFF_SZ); + trace(icom_port, "FOD_ADDR", stgAddr); + trace(icom_port, "FOD_XBUFF", + (unsigned long) icom_port->xmit_buf); + icom_port->statStg->xmit[index].leBuffer = + cpu_to_le32(icom_port->xmit_buf_pci); + } else if (index == (NUM_XBUFFS - 1)) { + memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area)); + icom_port->statStg->xmit[index].leLengthASD = + (unsigned short int) cpu_to_le16(XMIT_BUFF_SZ); + trace(icom_port, "FOD_XBUFF", + (unsigned long) icom_port->xmit_buf); + icom_port->statStg->xmit[index].leBuffer = + cpu_to_le32(icom_port->xmit_buf_pci); + } else { + memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area)); + } + } + /* FIDs */ + startStgAddr = stgAddr; + + /* fill in every entry, even if no buffer */ + for (index = 0; index < NUM_RBUFFS; index++) { + trace(icom_port, "FID_ADDR", stgAddr); + stgAddr = stgAddr + sizeof(icom_port->statStg->rcv[0]); + icom_port->statStg->rcv[index].leLength = 0; + icom_port->statStg->rcv[index].WorkingLength = + (unsigned short int) cpu_to_le16(RCV_BUFF_SZ); + if (index < (NUM_RBUFFS - 1) ) { + offset = stgAddr - (unsigned long) icom_port->statStg; + icom_port->statStg->rcv[index].leNext = + cpu_to_le32(icom_port-> statStg_pci + offset); + trace(icom_port, "FID_RBUFF", + (unsigned long) icom_port->recv_buf); + icom_port->statStg->rcv[index].leBuffer = + cpu_to_le32(icom_port->recv_buf_pci); + } else if (index == (NUM_RBUFFS -1) ) { + offset = startStgAddr - (unsigned long) icom_port->statStg; + icom_port->statStg->rcv[index].leNext = + cpu_to_le32(icom_port-> statStg_pci + offset); + trace(icom_port, "FID_RBUFF", + (unsigned long) icom_port->recv_buf + 2048); + icom_port->statStg->rcv[index].leBuffer = + cpu_to_le32(icom_port->recv_buf_pci + 2048); + } else { + icom_port->statStg->rcv[index].leNext = 0; + icom_port->statStg->rcv[index].leBuffer = 0; + } + } + + return 0; +} + +static void stop_processor(struct icom_port *icom_port) +{ + unsigned long temp; + unsigned long flags; + int port; + + spin_lock_irqsave(&icom_lock, flags); + + port = icom_port->port; + if (port >= ARRAY_SIZE(stop_proc)) { + dev_err(&icom_port->adapter->pci_dev->dev, + "Invalid port assignment\n"); + goto unlock; + } + + if (port == 0 || port == 1) + stop_proc[port].global_control_reg = &icom_port->global_reg->control; + else + stop_proc[port].global_control_reg = &icom_port->global_reg->control_2; + + temp = readl(stop_proc[port].global_control_reg); + temp = (temp & ~start_proc[port].processor_id) | stop_proc[port].processor_id; + writel(temp, stop_proc[port].global_control_reg); + + /* write flush */ + readl(stop_proc[port].global_control_reg); + +unlock: + spin_unlock_irqrestore(&icom_lock, flags); +} + +static void start_processor(struct icom_port *icom_port) +{ + unsigned long temp; + unsigned long flags; + int port; + + spin_lock_irqsave(&icom_lock, flags); + + port = icom_port->port; + if (port >= ARRAY_SIZE(start_proc)) { + dev_err(&icom_port->adapter->pci_dev->dev, + "Invalid port assignment\n"); + goto unlock; + } + + if (port == 0 || port == 1) + start_proc[port].global_control_reg = &icom_port->global_reg->control; + else + start_proc[port].global_control_reg = &icom_port->global_reg->control_2; + + temp = readl(start_proc[port].global_control_reg); + temp = (temp & ~stop_proc[port].processor_id) | start_proc[port].processor_id; + writel(temp, start_proc[port].global_control_reg); + + /* write flush */ + readl(start_proc[port].global_control_reg); + +unlock: + spin_unlock_irqrestore(&icom_lock, flags); +} + +static void load_code(struct icom_port *icom_port) +{ + const struct firmware *fw; + char __iomem *iram_ptr; + int index; + int status = 0; + void __iomem *dram_ptr = icom_port->dram; + dma_addr_t temp_pci; + unsigned char *new_page = NULL; + unsigned char cable_id = NO_CABLE; + struct pci_dev *dev = icom_port->adapter->pci_dev; + + /* Clear out any pending interrupts */ + writew(0x3FFF, icom_port->int_reg); + + trace(icom_port, "CLEAR_INTERRUPTS", 0); + + /* Stop processor */ + stop_processor(icom_port); + + /* Zero out DRAM */ + memset_io(dram_ptr, 0, 512); + + /* Load Call Setup into Adapter */ + if (request_firmware(&fw, "icom_call_setup.bin", &dev->dev) < 0) { + dev_err(&dev->dev,"Unable to load icom_call_setup.bin firmware image\n"); + status = -1; + goto load_code_exit; + } + + if (fw->size > ICOM_DCE_IRAM_OFFSET) { + dev_err(&dev->dev, "Invalid firmware image for icom_call_setup.bin found.\n"); + release_firmware(fw); + status = -1; + goto load_code_exit; + } + + iram_ptr = (char __iomem *)icom_port->dram + ICOM_IRAM_OFFSET; + for (index = 0; index < fw->size; index++) + writeb(fw->data[index], &iram_ptr[index]); + + release_firmware(fw); + + /* Load Resident DCE portion of Adapter */ + if (request_firmware(&fw, "icom_res_dce.bin", &dev->dev) < 0) { + dev_err(&dev->dev,"Unable to load icom_res_dce.bin firmware image\n"); + status = -1; + goto load_code_exit; + } + + if (fw->size > ICOM_IRAM_SIZE) { + dev_err(&dev->dev, "Invalid firmware image for icom_res_dce.bin found.\n"); + release_firmware(fw); + status = -1; + goto load_code_exit; + } + + iram_ptr = (char __iomem *) icom_port->dram + ICOM_IRAM_OFFSET; + for (index = ICOM_DCE_IRAM_OFFSET; index < fw->size; index++) + writeb(fw->data[index], &iram_ptr[index]); + + release_firmware(fw); + + /* Set Hardware level */ + if (icom_port->adapter->version == ADAPTER_V2) + writeb(V2_HARDWARE, &(icom_port->dram->misc_flags)); + + /* Start the processor in Adapter */ + start_processor(icom_port); + + writeb((HDLC_PPP_PURE_ASYNC | HDLC_FF_FILL), + &(icom_port->dram->HDLCConfigReg)); + writeb(0x04, &(icom_port->dram->FlagFillIdleTimer)); /* 0.5 seconds */ + writeb(0x00, &(icom_port->dram->CmdReg)); + writeb(0x10, &(icom_port->dram->async_config3)); + writeb((ICOM_ACFG_DRIVE1 | ICOM_ACFG_NO_PARITY | ICOM_ACFG_8BPC | + ICOM_ACFG_1STOP_BIT), &(icom_port->dram->async_config2)); + + /*Set up data in icom DRAM to indicate where personality + *code is located and its length. + */ + new_page = dma_alloc_coherent(&dev->dev, 4096, &temp_pci, GFP_KERNEL); + + if (!new_page) { + dev_err(&dev->dev, "Can not allocate DMA buffer\n"); + status = -1; + goto load_code_exit; + } + + if (request_firmware(&fw, "icom_asc.bin", &dev->dev) < 0) { + dev_err(&dev->dev,"Unable to load icom_asc.bin firmware image\n"); + status = -1; + goto load_code_exit; + } + + if (fw->size > ICOM_DCE_IRAM_OFFSET) { + dev_err(&dev->dev, "Invalid firmware image for icom_asc.bin found.\n"); + release_firmware(fw); + status = -1; + goto load_code_exit; + } + + for (index = 0; index < fw->size; index++) + new_page[index] = fw->data[index]; + + writeb((char) ((fw->size + 16)/16), &icom_port->dram->mac_length); + writel(temp_pci, &icom_port->dram->mac_load_addr); + + release_firmware(fw); + + /*Setting the syncReg to 0x80 causes adapter to start downloading + the personality code into adapter instruction RAM. + Once code is loaded, it will begin executing and, based on + information provided above, will start DMAing data from + shared memory to adapter DRAM. + */ + /* the wait loop below verifies this write operation has been done + and processed + */ + writeb(START_DOWNLOAD, &icom_port->dram->sync); + + /* Wait max 1 Sec for data download and processor to start */ + for (index = 0; index < 10; index++) { + msleep(100); + if (readb(&icom_port->dram->misc_flags) & ICOM_HDW_ACTIVE) + break; + } + + if (index == 10) + status = -1; + + /* + * check Cable ID + */ + cable_id = readb(&icom_port->dram->cable_id); + + if (cable_id & ICOM_CABLE_ID_VALID) { + /* Get cable ID into the lower 4 bits (standard form) */ + cable_id = (cable_id & ICOM_CABLE_ID_MASK) >> 4; + icom_port->cable_id = cable_id; + } else { + dev_err(&dev->dev,"Invalid or no cable attached\n"); + icom_port->cable_id = NO_CABLE; + } + + load_code_exit: + + if (status != 0) { + /* Clear out any pending interrupts */ + writew(0x3FFF, icom_port->int_reg); + + /* Turn off port */ + writeb(ICOM_DISABLE, &(icom_port->dram->disable)); + + /* Stop processor */ + stop_processor(icom_port); + + dev_err(&icom_port->adapter->pci_dev->dev,"Port not operational\n"); + } + + if (new_page != NULL) + dma_free_coherent(&dev->dev, 4096, new_page, temp_pci); +} + +static int startup(struct icom_port *icom_port) +{ + unsigned long temp; + unsigned char cable_id, raw_cable_id; + unsigned long flags; + int port; + + trace(icom_port, "STARTUP", 0); + + if (!icom_port->dram) { + /* should NEVER be NULL */ + dev_err(&icom_port->adapter->pci_dev->dev, + "Unusable Port, port configuration missing\n"); + return -ENODEV; + } + + /* + * check Cable ID + */ + raw_cable_id = readb(&icom_port->dram->cable_id); + trace(icom_port, "CABLE_ID", raw_cable_id); + + /* Get cable ID into the lower 4 bits (standard form) */ + cable_id = (raw_cable_id & ICOM_CABLE_ID_MASK) >> 4; + + /* Check for valid Cable ID */ + if (!(raw_cable_id & ICOM_CABLE_ID_VALID) || + (cable_id != icom_port->cable_id)) { + + /* reload adapter code, pick up any potential changes in cable id */ + load_code(icom_port); + + /* still no sign of cable, error out */ + raw_cable_id = readb(&icom_port->dram->cable_id); + cable_id = (raw_cable_id & ICOM_CABLE_ID_MASK) >> 4; + if (!(raw_cable_id & ICOM_CABLE_ID_VALID) || + (icom_port->cable_id == NO_CABLE)) + return -EIO; + } + + /* + * Finally, clear and enable interrupts + */ + spin_lock_irqsave(&icom_lock, flags); + port = icom_port->port; + if (port >= ARRAY_SIZE(int_mask_tbl)) { + dev_err(&icom_port->adapter->pci_dev->dev, + "Invalid port assignment\n"); + goto unlock; + } + + if (port == 0 || port == 1) + int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask; + else + int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask_2; + + if (port == 0 || port == 2) + writew(0x00FF, icom_port->int_reg); + else + writew(0x3F00, icom_port->int_reg); + + temp = readl(int_mask_tbl[port].global_int_mask); + writel(temp & ~int_mask_tbl[port].processor_id, int_mask_tbl[port].global_int_mask); + + /* write flush */ + readl(int_mask_tbl[port].global_int_mask); + +unlock: + spin_unlock_irqrestore(&icom_lock, flags); + return 0; +} + +static void shutdown(struct icom_port *icom_port) +{ + unsigned long temp; + unsigned char cmdReg; + unsigned long flags; + int port; + + spin_lock_irqsave(&icom_lock, flags); + trace(icom_port, "SHUTDOWN", 0); + + /* + * disable all interrupts + */ + port = icom_port->port; + if (port >= ARRAY_SIZE(int_mask_tbl)) { + dev_err(&icom_port->adapter->pci_dev->dev, + "Invalid port assignment\n"); + goto unlock; + } + if (port == 0 || port == 1) + int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask; + else + int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask_2; + + temp = readl(int_mask_tbl[port].global_int_mask); + writel(temp | int_mask_tbl[port].processor_id, int_mask_tbl[port].global_int_mask); + + /* write flush */ + readl(int_mask_tbl[port].global_int_mask); + +unlock: + spin_unlock_irqrestore(&icom_lock, flags); + + /* + * disable break condition + */ + cmdReg = readb(&icom_port->dram->CmdReg); + if (cmdReg & CMD_SND_BREAK) { + writeb(cmdReg & ~CMD_SND_BREAK, &icom_port->dram->CmdReg); + } +} + +static int icom_write(struct uart_port *port) +{ + unsigned long data_count; + unsigned char cmdReg; + unsigned long offset; + int temp_tail = port->state->xmit.tail; + + trace(ICOM_PORT, "WRITE", 0); + + if (cpu_to_le16(ICOM_PORT->statStg->xmit[0].flags) & + SA_FLAGS_READY_TO_XMIT) { + trace(ICOM_PORT, "WRITE_FULL", 0); + return 0; + } + + data_count = 0; + while ((port->state->xmit.head != temp_tail) && + (data_count <= XMIT_BUFF_SZ)) { + + ICOM_PORT->xmit_buf[data_count++] = + port->state->xmit.buf[temp_tail]; + + temp_tail++; + temp_tail &= (UART_XMIT_SIZE - 1); + } + + if (data_count) { + ICOM_PORT->statStg->xmit[0].flags = + cpu_to_le16(SA_FLAGS_READY_TO_XMIT); + ICOM_PORT->statStg->xmit[0].leLength = + cpu_to_le16(data_count); + offset = + (unsigned long) &ICOM_PORT->statStg->xmit[0] - + (unsigned long) ICOM_PORT->statStg; + *ICOM_PORT->xmitRestart = + cpu_to_le32(ICOM_PORT->statStg_pci + offset); + cmdReg = readb(&ICOM_PORT->dram->CmdReg); + writeb(cmdReg | CMD_XMIT_RCV_ENABLE, + &ICOM_PORT->dram->CmdReg); + writeb(START_XMIT, &ICOM_PORT->dram->StartXmitCmd); + trace(ICOM_PORT, "WRITE_START", data_count); + /* write flush */ + readb(&ICOM_PORT->dram->StartXmitCmd); + } + + return data_count; +} + +static inline void check_modem_status(struct icom_port *icom_port) +{ + static char old_status = 0; + char delta_status; + unsigned char status; + + spin_lock(&icom_port->uart_port.lock); + + /*modem input register */ + status = readb(&icom_port->dram->isr); + trace(icom_port, "CHECK_MODEM", status); + delta_status = status ^ old_status; + if (delta_status) { + if (delta_status & ICOM_RI) + icom_port->uart_port.icount.rng++; + if (delta_status & ICOM_DSR) + icom_port->uart_port.icount.dsr++; + if (delta_status & ICOM_DCD) + uart_handle_dcd_change(&icom_port->uart_port, + delta_status & ICOM_DCD); + if (delta_status & ICOM_CTS) + uart_handle_cts_change(&icom_port->uart_port, + delta_status & ICOM_CTS); + + wake_up_interruptible(&icom_port->uart_port.state-> + port.delta_msr_wait); + old_status = status; + } + spin_unlock(&icom_port->uart_port.lock); +} + +static void xmit_interrupt(u16 port_int_reg, struct icom_port *icom_port) +{ + unsigned short int count; + int i; + + if (port_int_reg & (INT_XMIT_COMPLETED)) { + trace(icom_port, "XMIT_COMPLETE", 0); + + /* clear buffer in use bit */ + icom_port->statStg->xmit[0].flags &= + cpu_to_le16(~SA_FLAGS_READY_TO_XMIT); + + count = (unsigned short int) + cpu_to_le16(icom_port->statStg->xmit[0].leLength); + icom_port->uart_port.icount.tx += count; + + for (i=0; iuart_port.state->xmit); i++) { + + icom_port->uart_port.state->xmit.tail++; + icom_port->uart_port.state->xmit.tail &= + (UART_XMIT_SIZE - 1); + } + + if (!icom_write(&icom_port->uart_port)) + /* activate write queue */ + uart_write_wakeup(&icom_port->uart_port); + } else + trace(icom_port, "XMIT_DISABLED", 0); +} + +static void recv_interrupt(u16 port_int_reg, struct icom_port *icom_port) +{ + short int count, rcv_buff; + struct tty_port *port = &icom_port->uart_port.state->port; + unsigned short int status; + struct uart_icount *icount; + unsigned long offset; + unsigned char flag; + + trace(icom_port, "RCV_COMPLETE", 0); + rcv_buff = icom_port->next_rcv; + + status = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].flags); + while (status & SA_FL_RCV_DONE) { + int first = -1; + + trace(icom_port, "FID_STATUS", status); + count = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].leLength); + + trace(icom_port, "RCV_COUNT", count); + + trace(icom_port, "REAL_COUNT", count); + + offset = + cpu_to_le32(icom_port->statStg->rcv[rcv_buff].leBuffer) - + icom_port->recv_buf_pci; + + /* Block copy all but the last byte as this may have status */ + if (count > 0) { + first = icom_port->recv_buf[offset]; + tty_insert_flip_string(port, icom_port->recv_buf + offset, count - 1); + } + + icount = &icom_port->uart_port.icount; + icount->rx += count; + + /* Break detect logic */ + if ((status & SA_FLAGS_FRAME_ERROR) + && first == 0) { + status &= ~SA_FLAGS_FRAME_ERROR; + status |= SA_FLAGS_BREAK_DET; + trace(icom_port, "BREAK_DET", 0); + } + + flag = TTY_NORMAL; + + if (status & + (SA_FLAGS_BREAK_DET | SA_FLAGS_PARITY_ERROR | + SA_FLAGS_FRAME_ERROR | SA_FLAGS_OVERRUN)) { + + if (status & SA_FLAGS_BREAK_DET) + icount->brk++; + if (status & SA_FLAGS_PARITY_ERROR) + icount->parity++; + if (status & SA_FLAGS_FRAME_ERROR) + icount->frame++; + if (status & SA_FLAGS_OVERRUN) + icount->overrun++; + + /* + * Now check to see if character should be + * ignored, and mask off conditions which + * should be ignored. + */ + if (status & icom_port->ignore_status_mask) { + trace(icom_port, "IGNORE_CHAR", 0); + goto ignore_char; + } + + status &= icom_port->read_status_mask; + + if (status & SA_FLAGS_BREAK_DET) { + flag = TTY_BREAK; + } else if (status & SA_FLAGS_PARITY_ERROR) { + trace(icom_port, "PARITY_ERROR", 0); + flag = TTY_PARITY; + } else if (status & SA_FLAGS_FRAME_ERROR) + flag = TTY_FRAME; + + } + + tty_insert_flip_char(port, *(icom_port->recv_buf + offset + count - 1), flag); + + if (status & SA_FLAGS_OVERRUN) + /* + * Overrun is special, since it's + * reported immediately, and doesn't + * affect the current character + */ + tty_insert_flip_char(port, 0, TTY_OVERRUN); +ignore_char: + icom_port->statStg->rcv[rcv_buff].flags = 0; + icom_port->statStg->rcv[rcv_buff].leLength = 0; + icom_port->statStg->rcv[rcv_buff].WorkingLength = + (unsigned short int) cpu_to_le16(RCV_BUFF_SZ); + + rcv_buff++; + if (rcv_buff == NUM_RBUFFS) + rcv_buff = 0; + + status = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].flags); + } + icom_port->next_rcv = rcv_buff; + + spin_unlock(&icom_port->uart_port.lock); + tty_flip_buffer_push(port); + spin_lock(&icom_port->uart_port.lock); +} + +static void process_interrupt(u16 port_int_reg, + struct icom_port *icom_port) +{ + + spin_lock(&icom_port->uart_port.lock); + trace(icom_port, "INTERRUPT", port_int_reg); + + if (port_int_reg & (INT_XMIT_COMPLETED | INT_XMIT_DISABLED)) + xmit_interrupt(port_int_reg, icom_port); + + if (port_int_reg & INT_RCV_COMPLETED) + recv_interrupt(port_int_reg, icom_port); + + spin_unlock(&icom_port->uart_port.lock); +} + +static irqreturn_t icom_interrupt(int irq, void *dev_id) +{ + void __iomem * int_reg; + u32 adapter_interrupts; + u16 port_int_reg; + struct icom_adapter *icom_adapter; + struct icom_port *icom_port; + + /* find icom_port for this interrupt */ + icom_adapter = (struct icom_adapter *) dev_id; + + if (icom_adapter->version == ADAPTER_V2) { + int_reg = icom_adapter->base_addr + 0x8024; + + adapter_interrupts = readl(int_reg); + + if (adapter_interrupts & 0x00003FFF) { + /* port 2 interrupt, NOTE: for all ADAPTER_V2, port 2 will be active */ + icom_port = &icom_adapter->port_info[2]; + port_int_reg = (u16) adapter_interrupts; + process_interrupt(port_int_reg, icom_port); + check_modem_status(icom_port); + } + if (adapter_interrupts & 0x3FFF0000) { + /* port 3 interrupt */ + icom_port = &icom_adapter->port_info[3]; + if (icom_port->status == ICOM_PORT_ACTIVE) { + port_int_reg = + (u16) (adapter_interrupts >> 16); + process_interrupt(port_int_reg, icom_port); + check_modem_status(icom_port); + } + } + + /* Clear out any pending interrupts */ + writel(adapter_interrupts, int_reg); + + int_reg = icom_adapter->base_addr + 0x8004; + } else { + int_reg = icom_adapter->base_addr + 0x4004; + } + + adapter_interrupts = readl(int_reg); + + if (adapter_interrupts & 0x00003FFF) { + /* port 0 interrupt, NOTE: for all adapters, port 0 will be active */ + icom_port = &icom_adapter->port_info[0]; + port_int_reg = (u16) adapter_interrupts; + process_interrupt(port_int_reg, icom_port); + check_modem_status(icom_port); + } + if (adapter_interrupts & 0x3FFF0000) { + /* port 1 interrupt */ + icom_port = &icom_adapter->port_info[1]; + if (icom_port->status == ICOM_PORT_ACTIVE) { + port_int_reg = (u16) (adapter_interrupts >> 16); + process_interrupt(port_int_reg, icom_port); + check_modem_status(icom_port); + } + } + + /* Clear out any pending interrupts */ + writel(adapter_interrupts, int_reg); + + /* flush the write */ + adapter_interrupts = readl(int_reg); + + return IRQ_HANDLED; +} + +/* + * ------------------------------------------------------------------ + * Begin serial-core API + * ------------------------------------------------------------------ + */ +static unsigned int icom_tx_empty(struct uart_port *port) +{ + int ret; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + if (cpu_to_le16(ICOM_PORT->statStg->xmit[0].flags) & + SA_FLAGS_READY_TO_XMIT) + ret = TIOCSER_TEMT; + else + ret = 0; + + spin_unlock_irqrestore(&port->lock, flags); + return ret; +} + +static void icom_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + unsigned char local_osr; + + trace(ICOM_PORT, "SET_MODEM", 0); + local_osr = readb(&ICOM_PORT->dram->osr); + + if (mctrl & TIOCM_RTS) { + trace(ICOM_PORT, "RAISE_RTS", 0); + local_osr |= ICOM_RTS; + } else { + trace(ICOM_PORT, "LOWER_RTS", 0); + local_osr &= ~ICOM_RTS; + } + + if (mctrl & TIOCM_DTR) { + trace(ICOM_PORT, "RAISE_DTR", 0); + local_osr |= ICOM_DTR; + } else { + trace(ICOM_PORT, "LOWER_DTR", 0); + local_osr &= ~ICOM_DTR; + } + + writeb(local_osr, &ICOM_PORT->dram->osr); +} + +static unsigned int icom_get_mctrl(struct uart_port *port) +{ + unsigned char status; + unsigned int result; + + trace(ICOM_PORT, "GET_MODEM", 0); + + status = readb(&ICOM_PORT->dram->isr); + + result = ((status & ICOM_DCD) ? TIOCM_CAR : 0) + | ((status & ICOM_RI) ? TIOCM_RNG : 0) + | ((status & ICOM_DSR) ? TIOCM_DSR : 0) + | ((status & ICOM_CTS) ? TIOCM_CTS : 0); + return result; +} + +static void icom_stop_tx(struct uart_port *port) +{ + unsigned char cmdReg; + + trace(ICOM_PORT, "STOP", 0); + cmdReg = readb(&ICOM_PORT->dram->CmdReg); + writeb(cmdReg | CMD_HOLD_XMIT, &ICOM_PORT->dram->CmdReg); +} + +static void icom_start_tx(struct uart_port *port) +{ + unsigned char cmdReg; + + trace(ICOM_PORT, "START", 0); + cmdReg = readb(&ICOM_PORT->dram->CmdReg); + if ((cmdReg & CMD_HOLD_XMIT) == CMD_HOLD_XMIT) + writeb(cmdReg & ~CMD_HOLD_XMIT, + &ICOM_PORT->dram->CmdReg); + + icom_write(port); +} + +static void icom_send_xchar(struct uart_port *port, char ch) +{ + unsigned char xdata; + int index; + unsigned long flags; + + trace(ICOM_PORT, "SEND_XCHAR", ch); + + /* wait .1 sec to send char */ + for (index = 0; index < 10; index++) { + spin_lock_irqsave(&port->lock, flags); + xdata = readb(&ICOM_PORT->dram->xchar); + if (xdata == 0x00) { + trace(ICOM_PORT, "QUICK_WRITE", 0); + writeb(ch, &ICOM_PORT->dram->xchar); + + /* flush write operation */ + xdata = readb(&ICOM_PORT->dram->xchar); + spin_unlock_irqrestore(&port->lock, flags); + break; + } + spin_unlock_irqrestore(&port->lock, flags); + msleep(10); + } +} + +static void icom_stop_rx(struct uart_port *port) +{ + unsigned char cmdReg; + + cmdReg = readb(&ICOM_PORT->dram->CmdReg); + writeb(cmdReg & ~CMD_RCV_ENABLE, &ICOM_PORT->dram->CmdReg); +} + +static void icom_break(struct uart_port *port, int break_state) +{ + unsigned char cmdReg; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + trace(ICOM_PORT, "BREAK", 0); + cmdReg = readb(&ICOM_PORT->dram->CmdReg); + if (break_state == -1) { + writeb(cmdReg | CMD_SND_BREAK, &ICOM_PORT->dram->CmdReg); + } else { + writeb(cmdReg & ~CMD_SND_BREAK, &ICOM_PORT->dram->CmdReg); + } + spin_unlock_irqrestore(&port->lock, flags); +} + +static int icom_open(struct uart_port *port) +{ + int retval; + + kref_get(&ICOM_PORT->adapter->kref); + retval = startup(ICOM_PORT); + + if (retval) { + kref_put(&ICOM_PORT->adapter->kref, icom_kref_release); + trace(ICOM_PORT, "STARTUP_ERROR", 0); + return retval; + } + + return 0; +} + +static void icom_close(struct uart_port *port) +{ + unsigned char cmdReg; + + trace(ICOM_PORT, "CLOSE", 0); + + /* stop receiver */ + cmdReg = readb(&ICOM_PORT->dram->CmdReg); + writeb(cmdReg & ~CMD_RCV_ENABLE, &ICOM_PORT->dram->CmdReg); + + shutdown(ICOM_PORT); + + kref_put(&ICOM_PORT->adapter->kref, icom_kref_release); +} + +static void icom_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old_termios) +{ + int baud; + unsigned cflag, iflag; + char new_config2; + char new_config3 = 0; + char tmp_byte; + int index; + int rcv_buff, xmit_buff; + unsigned long offset; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + trace(ICOM_PORT, "CHANGE_SPEED", 0); + + cflag = termios->c_cflag; + iflag = termios->c_iflag; + + new_config2 = ICOM_ACFG_DRIVE1; + + /* byte size and parity */ + switch (cflag & CSIZE) { + case CS5: /* 5 bits/char */ + new_config2 |= ICOM_ACFG_5BPC; + break; + case CS6: /* 6 bits/char */ + new_config2 |= ICOM_ACFG_6BPC; + break; + case CS7: /* 7 bits/char */ + new_config2 |= ICOM_ACFG_7BPC; + break; + case CS8: /* 8 bits/char */ + new_config2 |= ICOM_ACFG_8BPC; + break; + default: + break; + } + if (cflag & CSTOPB) { + /* 2 stop bits */ + new_config2 |= ICOM_ACFG_2STOP_BIT; + } + if (cflag & PARENB) { + /* parity bit enabled */ + new_config2 |= ICOM_ACFG_PARITY_ENAB; + trace(ICOM_PORT, "PARENB", 0); + } + if (cflag & PARODD) { + /* odd parity */ + new_config2 |= ICOM_ACFG_PARITY_ODD; + trace(ICOM_PORT, "PARODD", 0); + } + + /* Determine divisor based on baud rate */ + baud = uart_get_baud_rate(port, termios, old_termios, + icom_acfg_baud[0], + icom_acfg_baud[BAUD_TABLE_LIMIT]); + if (!baud) + baud = 9600; /* B0 transition handled in rs_set_termios */ + + for (index = 0; index < BAUD_TABLE_LIMIT; index++) { + if (icom_acfg_baud[index] == baud) { + new_config3 = index; + break; + } + } + + uart_update_timeout(port, cflag, baud); + + /* CTS flow control flag and modem status interrupts */ + tmp_byte = readb(&(ICOM_PORT->dram->HDLCConfigReg)); + if (cflag & CRTSCTS) + tmp_byte |= HDLC_HDW_FLOW; + else + tmp_byte &= ~HDLC_HDW_FLOW; + writeb(tmp_byte, &(ICOM_PORT->dram->HDLCConfigReg)); + + /* + * Set up parity check flag + */ + ICOM_PORT->read_status_mask = SA_FLAGS_OVERRUN | SA_FL_RCV_DONE; + if (iflag & INPCK) + ICOM_PORT->read_status_mask |= + SA_FLAGS_FRAME_ERROR | SA_FLAGS_PARITY_ERROR; + + if ((iflag & BRKINT) || (iflag & PARMRK)) + ICOM_PORT->read_status_mask |= SA_FLAGS_BREAK_DET; + + /* + * Characters to ignore + */ + ICOM_PORT->ignore_status_mask = 0; + if (iflag & IGNPAR) + ICOM_PORT->ignore_status_mask |= + SA_FLAGS_PARITY_ERROR | SA_FLAGS_FRAME_ERROR; + if (iflag & IGNBRK) { + ICOM_PORT->ignore_status_mask |= SA_FLAGS_BREAK_DET; + /* + * If we're ignore parity and break indicators, ignore + * overruns too. (For real raw support). + */ + if (iflag & IGNPAR) + ICOM_PORT->ignore_status_mask |= SA_FLAGS_OVERRUN; + } + + /* + * !!! ignore all characters if CREAD is not set + */ + if ((cflag & CREAD) == 0) + ICOM_PORT->ignore_status_mask |= SA_FL_RCV_DONE; + + /* Turn off Receiver to prepare for reset */ + writeb(CMD_RCV_DISABLE, &ICOM_PORT->dram->CmdReg); + + for (index = 0; index < 10; index++) { + if (readb(&ICOM_PORT->dram->PrevCmdReg) == 0x00) { + break; + } + } + + /* clear all current buffers of data */ + for (rcv_buff = 0; rcv_buff < NUM_RBUFFS; rcv_buff++) { + ICOM_PORT->statStg->rcv[rcv_buff].flags = 0; + ICOM_PORT->statStg->rcv[rcv_buff].leLength = 0; + ICOM_PORT->statStg->rcv[rcv_buff].WorkingLength = + (unsigned short int) cpu_to_le16(RCV_BUFF_SZ); + } + + for (xmit_buff = 0; xmit_buff < NUM_XBUFFS; xmit_buff++) { + ICOM_PORT->statStg->xmit[xmit_buff].flags = 0; + } + + /* activate changes and start xmit and receiver here */ + /* Enable the receiver */ + writeb(new_config3, &(ICOM_PORT->dram->async_config3)); + writeb(new_config2, &(ICOM_PORT->dram->async_config2)); + tmp_byte = readb(&(ICOM_PORT->dram->HDLCConfigReg)); + tmp_byte |= HDLC_PPP_PURE_ASYNC | HDLC_FF_FILL; + writeb(tmp_byte, &(ICOM_PORT->dram->HDLCConfigReg)); + writeb(0x04, &(ICOM_PORT->dram->FlagFillIdleTimer)); /* 0.5 seconds */ + writeb(0xFF, &(ICOM_PORT->dram->ier)); /* enable modem signal interrupts */ + + /* reset processor */ + writeb(CMD_RESTART, &ICOM_PORT->dram->CmdReg); + + for (index = 0; index < 10; index++) { + if (readb(&ICOM_PORT->dram->CmdReg) == 0x00) { + break; + } + } + + /* Enable Transmitter and Receiver */ + offset = + (unsigned long) &ICOM_PORT->statStg->rcv[0] - + (unsigned long) ICOM_PORT->statStg; + writel(ICOM_PORT->statStg_pci + offset, + &ICOM_PORT->dram->RcvStatusAddr); + ICOM_PORT->next_rcv = 0; + ICOM_PORT->put_length = 0; + *ICOM_PORT->xmitRestart = 0; + writel(ICOM_PORT->xmitRestart_pci, + &ICOM_PORT->dram->XmitStatusAddr); + trace(ICOM_PORT, "XR_ENAB", 0); + writeb(CMD_XMIT_RCV_ENABLE, &ICOM_PORT->dram->CmdReg); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *icom_type(struct uart_port *port) +{ + return "icom"; +} + +static void icom_release_port(struct uart_port *port) +{ +} + +static int icom_request_port(struct uart_port *port) +{ + return 0; +} + +static void icom_config_port(struct uart_port *port, int flags) +{ + port->type = PORT_ICOM; +} + +static const struct uart_ops icom_ops = { + .tx_empty = icom_tx_empty, + .set_mctrl = icom_set_mctrl, + .get_mctrl = icom_get_mctrl, + .stop_tx = icom_stop_tx, + .start_tx = icom_start_tx, + .send_xchar = icom_send_xchar, + .stop_rx = icom_stop_rx, + .break_ctl = icom_break, + .startup = icom_open, + .shutdown = icom_close, + .set_termios = icom_set_termios, + .type = icom_type, + .release_port = icom_release_port, + .request_port = icom_request_port, + .config_port = icom_config_port, +}; + +#define ICOM_CONSOLE NULL + +static struct uart_driver icom_uart_driver = { + .owner = THIS_MODULE, + .driver_name = ICOM_DRIVER_NAME, + .dev_name = "ttyA", + .major = ICOM_MAJOR, + .minor = ICOM_MINOR_START, + .nr = NR_PORTS, + .cons = ICOM_CONSOLE, +}; + +static int icom_init_ports(struct icom_adapter *icom_adapter) +{ + u32 subsystem_id = icom_adapter->subsystem_id; + int i; + struct icom_port *icom_port; + + if (icom_adapter->version == ADAPTER_V1) { + icom_adapter->numb_ports = 2; + + for (i = 0; i < 2; i++) { + icom_port = &icom_adapter->port_info[i]; + icom_port->port = i; + icom_port->status = ICOM_PORT_ACTIVE; + icom_port->imbed_modem = ICOM_UNKNOWN; + } + } else { + if (subsystem_id == PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL) { + icom_adapter->numb_ports = 4; + + for (i = 0; i < 4; i++) { + icom_port = &icom_adapter->port_info[i]; + + icom_port->port = i; + icom_port->status = ICOM_PORT_ACTIVE; + icom_port->imbed_modem = ICOM_IMBED_MODEM; + } + } else { + icom_adapter->numb_ports = 4; + + icom_adapter->port_info[0].port = 0; + icom_adapter->port_info[0].status = ICOM_PORT_ACTIVE; + + if (subsystem_id == + PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM) { + icom_adapter->port_info[0].imbed_modem = ICOM_IMBED_MODEM; + } else { + icom_adapter->port_info[0].imbed_modem = ICOM_RVX; + } + + icom_adapter->port_info[1].status = ICOM_PORT_OFF; + + icom_adapter->port_info[2].port = 2; + icom_adapter->port_info[2].status = ICOM_PORT_ACTIVE; + icom_adapter->port_info[2].imbed_modem = ICOM_RVX; + icom_adapter->port_info[3].status = ICOM_PORT_OFF; + } + } + + return 0; +} + +static void icom_port_active(struct icom_port *icom_port, struct icom_adapter *icom_adapter, int port_num) +{ + if (icom_adapter->version == ADAPTER_V1) { + icom_port->global_reg = icom_adapter->base_addr + 0x4000; + icom_port->int_reg = icom_adapter->base_addr + + 0x4004 + 2 - 2 * port_num; + } else { + icom_port->global_reg = icom_adapter->base_addr + 0x8000; + if (icom_port->port < 2) + icom_port->int_reg = icom_adapter->base_addr + + 0x8004 + 2 - 2 * icom_port->port; + else + icom_port->int_reg = icom_adapter->base_addr + + 0x8024 + 2 - 2 * (icom_port->port - 2); + } +} +static int icom_load_ports(struct icom_adapter *icom_adapter) +{ + struct icom_port *icom_port; + int port_num; + + for (port_num = 0; port_num < icom_adapter->numb_ports; port_num++) { + + icom_port = &icom_adapter->port_info[port_num]; + + if (icom_port->status == ICOM_PORT_ACTIVE) { + icom_port_active(icom_port, icom_adapter, port_num); + icom_port->dram = icom_adapter->base_addr + + 0x2000 * icom_port->port; + + icom_port->adapter = icom_adapter; + + /* get port memory */ + if (get_port_memory(icom_port) != 0) { + dev_err(&icom_port->adapter->pci_dev->dev, + "Memory allocation for port FAILED\n"); + } + } + } + return 0; +} + +static int icom_alloc_adapter(struct icom_adapter + **icom_adapter_ref) +{ + int adapter_count = 0; + struct icom_adapter *icom_adapter; + struct icom_adapter *cur_adapter_entry; + struct list_head *tmp; + + icom_adapter = kzalloc(sizeof(struct icom_adapter), GFP_KERNEL); + + if (!icom_adapter) { + return -ENOMEM; + } + + list_for_each(tmp, &icom_adapter_head) { + cur_adapter_entry = + list_entry(tmp, struct icom_adapter, + icom_adapter_entry); + if (cur_adapter_entry->index != adapter_count) { + break; + } + adapter_count++; + } + + icom_adapter->index = adapter_count; + list_add_tail(&icom_adapter->icom_adapter_entry, tmp); + + *icom_adapter_ref = icom_adapter; + return 0; +} + +static void icom_free_adapter(struct icom_adapter *icom_adapter) +{ + list_del(&icom_adapter->icom_adapter_entry); + kfree(icom_adapter); +} + +static void icom_remove_adapter(struct icom_adapter *icom_adapter) +{ + struct icom_port *icom_port; + int index; + + for (index = 0; index < icom_adapter->numb_ports; index++) { + icom_port = &icom_adapter->port_info[index]; + + if (icom_port->status == ICOM_PORT_ACTIVE) { + dev_info(&icom_adapter->pci_dev->dev, + "Device removed\n"); + + uart_remove_one_port(&icom_uart_driver, + &icom_port->uart_port); + + /* be sure that DTR and RTS are dropped */ + writeb(0x00, &icom_port->dram->osr); + + /* Wait 0.1 Sec for simple Init to complete */ + msleep(100); + + /* Stop proccessor */ + stop_processor(icom_port); + + free_port_memory(icom_port); + } + } + + free_irq(icom_adapter->pci_dev->irq, (void *) icom_adapter); + iounmap(icom_adapter->base_addr); + pci_release_regions(icom_adapter->pci_dev); + icom_free_adapter(icom_adapter); +} + +static void icom_kref_release(struct kref *kref) +{ + struct icom_adapter *icom_adapter; + + icom_adapter = to_icom_adapter(kref); + icom_remove_adapter(icom_adapter); +} + +static int icom_probe(struct pci_dev *dev, + const struct pci_device_id *ent) +{ + int index; + unsigned int command_reg; + int retval; + struct icom_adapter *icom_adapter; + struct icom_port *icom_port; + + retval = pci_enable_device(dev); + if (retval) { + dev_err(&dev->dev, "Device enable FAILED\n"); + return retval; + } + + retval = pci_request_regions(dev, "icom"); + if (retval) { + dev_err(&dev->dev, "pci_request_regions FAILED\n"); + pci_disable_device(dev); + return retval; + } + + pci_set_master(dev); + + retval = pci_read_config_dword(dev, PCI_COMMAND, &command_reg); + if (retval) { + dev_err(&dev->dev, "PCI Config read FAILED\n"); + goto probe_exit0; + } + + pci_write_config_dword(dev, PCI_COMMAND, + command_reg | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER + | PCI_COMMAND_PARITY | PCI_COMMAND_SERR); + + if (ent->driver_data == ADAPTER_V1) { + pci_write_config_dword(dev, 0x44, 0x8300830A); + } else { + pci_write_config_dword(dev, 0x44, 0x42004200); + pci_write_config_dword(dev, 0x48, 0x42004200); + } + + + retval = icom_alloc_adapter(&icom_adapter); + if (retval) { + dev_err(&dev->dev, "icom_alloc_adapter FAILED\n"); + retval = -EIO; + goto probe_exit0; + } + + icom_adapter->base_addr_pci = pci_resource_start(dev, 0); + icom_adapter->pci_dev = dev; + icom_adapter->version = ent->driver_data; + icom_adapter->subsystem_id = ent->subdevice; + + + retval = icom_init_ports(icom_adapter); + if (retval) { + dev_err(&dev->dev, "Port configuration failed\n"); + goto probe_exit1; + } + + icom_adapter->base_addr = pci_ioremap_bar(dev, 0); + + if (!icom_adapter->base_addr) { + retval = -ENOMEM; + goto probe_exit1; + } + + /* save off irq and request irq line */ + retval = request_irq(dev->irq, icom_interrupt, IRQF_SHARED, ICOM_DRIVER_NAME, (void *)icom_adapter); + if (retval) { + goto probe_exit2; + } + + retval = icom_load_ports(icom_adapter); + + for (index = 0; index < icom_adapter->numb_ports; index++) { + icom_port = &icom_adapter->port_info[index]; + + if (icom_port->status == ICOM_PORT_ACTIVE) { + icom_port->uart_port.irq = icom_port->adapter->pci_dev->irq; + icom_port->uart_port.type = PORT_ICOM; + icom_port->uart_port.iotype = UPIO_MEM; + icom_port->uart_port.membase = + (unsigned char __iomem *)icom_adapter->base_addr_pci; + icom_port->uart_port.fifosize = 16; + icom_port->uart_port.ops = &icom_ops; + icom_port->uart_port.line = + icom_port->port + icom_adapter->index * 4; + if (uart_add_one_port (&icom_uart_driver, &icom_port->uart_port)) { + icom_port->status = ICOM_PORT_OFF; + dev_err(&dev->dev, "Device add failed\n"); + } else + dev_info(&dev->dev, "Device added\n"); + } + } + + kref_init(&icom_adapter->kref); + return 0; + +probe_exit2: + iounmap(icom_adapter->base_addr); +probe_exit1: + icom_free_adapter(icom_adapter); + +probe_exit0: + pci_release_regions(dev); + pci_disable_device(dev); + + return retval; +} + +static void icom_remove(struct pci_dev *dev) +{ + struct icom_adapter *icom_adapter; + struct list_head *tmp; + + list_for_each(tmp, &icom_adapter_head) { + icom_adapter = list_entry(tmp, struct icom_adapter, + icom_adapter_entry); + if (icom_adapter->pci_dev == dev) { + kref_put(&icom_adapter->kref, icom_kref_release); + return; + } + } + + dev_err(&dev->dev, "Unable to find device to remove\n"); +} + +static struct pci_driver icom_pci_driver = { + .name = ICOM_DRIVER_NAME, + .id_table = icom_pci_table, + .probe = icom_probe, + .remove = icom_remove, +}; + +static int __init icom_init(void) +{ + int ret; + + spin_lock_init(&icom_lock); + + ret = uart_register_driver(&icom_uart_driver); + if (ret) + return ret; + + ret = pci_register_driver(&icom_pci_driver); + + if (ret < 0) + uart_unregister_driver(&icom_uart_driver); + + return ret; +} + +static void __exit icom_exit(void) +{ + pci_unregister_driver(&icom_pci_driver); + uart_unregister_driver(&icom_uart_driver); +} + +module_init(icom_init); +module_exit(icom_exit); + +MODULE_AUTHOR("Michael Anderson "); +MODULE_DESCRIPTION("IBM iSeries Serial IOA driver"); +MODULE_SUPPORTED_DEVICE + ("IBM iSeries 2745, 2771, 2772, 2742, 2793 and 2805 Communications adapters"); +MODULE_LICENSE("GPL"); +MODULE_FIRMWARE("icom_call_setup.bin"); +MODULE_FIRMWARE("icom_res_dce.bin"); +MODULE_FIRMWARE("icom_asc.bin"); diff --git a/drivers/tty/serial/icom.h b/drivers/tty/serial/icom.h new file mode 100644 index 000000000..26e3aa7b0 --- /dev/null +++ b/drivers/tty/serial/icom.h @@ -0,0 +1,274 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * icom.h + * + * Copyright (C) 2001 Michael Anderson, IBM Corporation + * + * Serial device driver include file. + */ + +#include + +#define BAUD_TABLE_LIMIT ((sizeof(icom_acfg_baud)/sizeof(int)) - 1) +static int icom_acfg_baud[] = { + 300, + 600, + 900, + 1200, + 1800, + 2400, + 3600, + 4800, + 7200, + 9600, + 14400, + 19200, + 28800, + 38400, + 57600, + 76800, + 115200, + 153600, + 230400, + 307200, + 460800, +}; + +struct icom_regs { + u32 control; /* Adapter Control Register */ + u32 interrupt; /* Adapter Interrupt Register */ + u32 int_mask; /* Adapter Interrupt Mask Reg */ + u32 int_pri; /* Adapter Interrupt Priority r */ + u32 int_reg_b; /* Adapter non-masked Interrupt */ + u32 resvd01; + u32 resvd02; + u32 resvd03; + u32 control_2; /* Adapter Control Register 2 */ + u32 interrupt_2; /* Adapter Interrupt Register 2 */ + u32 int_mask_2; /* Adapter Interrupt Mask 2 */ + u32 int_pri_2; /* Adapter Interrupt Prior 2 */ + u32 int_reg_2b; /* Adapter non-masked 2 */ +}; + +struct func_dram { + u32 reserved[108]; /* 0-1B0 reserved by personality code */ + u32 RcvStatusAddr; /* 1B0-1B3 Status Address for Next rcv */ + u8 RcvStnAddr; /* 1B4 Receive Station Addr */ + u8 IdleState; /* 1B5 Idle State */ + u8 IdleMonitor; /* 1B6 Idle Monitor */ + u8 FlagFillIdleTimer; /* 1B7 Flag Fill Idle Timer */ + u32 XmitStatusAddr; /* 1B8-1BB Transmit Status Address */ + u8 StartXmitCmd; /* 1BC Start Xmit Command */ + u8 HDLCConfigReg; /* 1BD Reserved */ + u8 CauseCode; /* 1BE Cause code for fatal error */ + u8 xchar; /* 1BF High priority send */ + u32 reserved3; /* 1C0-1C3 Reserved */ + u8 PrevCmdReg; /* 1C4 Reserved */ + u8 CmdReg; /* 1C5 Command Register */ + u8 async_config2; /* 1C6 Async Config Byte 2 */ + u8 async_config3; /* 1C7 Async Config Byte 3 */ + u8 dce_resvd[20]; /* 1C8-1DB DCE Rsvd */ + u8 dce_resvd21; /* 1DC DCE Rsvd (21st byte */ + u8 misc_flags; /* 1DD misc flags */ +#define V2_HARDWARE 0x40 +#define ICOM_HDW_ACTIVE 0x01 + u8 call_length; /* 1DE Phone #/CFI buff ln */ + u8 call_length2; /* 1DF Upper byte (unused) */ + u32 call_addr; /* 1E0-1E3 Phn #/CFI buff addr */ + u16 timer_value; /* 1E4-1E5 general timer value */ + u8 timer_command; /* 1E6 general timer cmd */ + u8 dce_command; /* 1E7 dce command reg */ + u8 dce_cmd_status; /* 1E8 dce command stat */ + u8 x21_r1_ioff; /* 1E9 dce ready counter */ + u8 x21_r0_ioff; /* 1EA dce not ready ctr */ + u8 x21_ralt_ioff; /* 1EB dce CNR counter */ + u8 x21_r1_ion; /* 1EC dce ready I on ctr */ + u8 rsvd_ier; /* 1ED Rsvd for IER (if ne */ + u8 ier; /* 1EE Interrupt Enable */ + u8 isr; /* 1EF Input Signal Reg */ + u8 osr; /* 1F0 Output Signal Reg */ + u8 reset; /* 1F1 Reset/Reload Reg */ + u8 disable; /* 1F2 Disable Reg */ + u8 sync; /* 1F3 Sync Reg */ + u8 error_stat; /* 1F4 Error Status */ + u8 cable_id; /* 1F5 Cable ID */ + u8 cs_length; /* 1F6 CS Load Length */ + u8 mac_length; /* 1F7 Mac Load Length */ + u32 cs_load_addr; /* 1F8-1FB Call Load PCI Addr */ + u32 mac_load_addr; /* 1FC-1FF Mac Load PCI Addr */ +}; + +/* + * adapter defines and structures + */ +#define ICOM_CONTROL_START_A 0x00000008 +#define ICOM_CONTROL_STOP_A 0x00000004 +#define ICOM_CONTROL_START_B 0x00000002 +#define ICOM_CONTROL_STOP_B 0x00000001 +#define ICOM_CONTROL_START_C 0x00000008 +#define ICOM_CONTROL_STOP_C 0x00000004 +#define ICOM_CONTROL_START_D 0x00000002 +#define ICOM_CONTROL_STOP_D 0x00000001 +#define ICOM_IRAM_OFFSET 0x1000 +#define ICOM_IRAM_SIZE 0x0C00 +#define ICOM_DCE_IRAM_OFFSET 0x0A00 +#define ICOM_CABLE_ID_VALID 0x01 +#define ICOM_CABLE_ID_MASK 0xF0 +#define ICOM_DISABLE 0x80 +#define CMD_XMIT_RCV_ENABLE 0xC0 +#define CMD_XMIT_ENABLE 0x40 +#define CMD_RCV_DISABLE 0x00 +#define CMD_RCV_ENABLE 0x80 +#define CMD_RESTART 0x01 +#define CMD_HOLD_XMIT 0x02 +#define CMD_SND_BREAK 0x04 +#define RS232_CABLE 0x06 +#define V24_CABLE 0x0E +#define V35_CABLE 0x0C +#define V36_CABLE 0x02 +#define NO_CABLE 0x00 +#define START_DOWNLOAD 0x80 +#define ICOM_INT_MASK_PRC_A 0x00003FFF +#define ICOM_INT_MASK_PRC_B 0x3FFF0000 +#define ICOM_INT_MASK_PRC_C 0x00003FFF +#define ICOM_INT_MASK_PRC_D 0x3FFF0000 +#define INT_RCV_COMPLETED 0x1000 +#define INT_XMIT_COMPLETED 0x2000 +#define INT_IDLE_DETECT 0x0800 +#define INT_RCV_DISABLED 0x0400 +#define INT_XMIT_DISABLED 0x0200 +#define INT_RCV_XMIT_SHUTDOWN 0x0100 +#define INT_FATAL_ERROR 0x0080 +#define INT_CABLE_PULL 0x0020 +#define INT_SIGNAL_CHANGE 0x0010 +#define HDLC_PPP_PURE_ASYNC 0x02 +#define HDLC_FF_FILL 0x00 +#define HDLC_HDW_FLOW 0x01 +#define START_XMIT 0x80 +#define ICOM_ACFG_DRIVE1 0x20 +#define ICOM_ACFG_NO_PARITY 0x00 +#define ICOM_ACFG_PARITY_ENAB 0x02 +#define ICOM_ACFG_PARITY_ODD 0x01 +#define ICOM_ACFG_8BPC 0x00 +#define ICOM_ACFG_7BPC 0x04 +#define ICOM_ACFG_6BPC 0x08 +#define ICOM_ACFG_5BPC 0x0C +#define ICOM_ACFG_1STOP_BIT 0x00 +#define ICOM_ACFG_2STOP_BIT 0x10 +#define ICOM_DTR 0x80 +#define ICOM_RTS 0x40 +#define ICOM_RI 0x08 +#define ICOM_DSR 0x80 +#define ICOM_DCD 0x20 +#define ICOM_CTS 0x40 + +#define NUM_XBUFFS 1 +#define NUM_RBUFFS 2 +#define RCV_BUFF_SZ 0x0200 +#define XMIT_BUFF_SZ 0x1000 +struct statusArea { + /**********************************************/ + /* Transmit Status Area */ + /**********************************************/ + struct xmit_status_area{ + u32 leNext; /* Next entry in Little Endian on Adapter */ + u32 leNextASD; + u32 leBuffer; /* Buffer for entry in LE for Adapter */ + u16 leLengthASD; + u16 leOffsetASD; + u16 leLength; /* Length of data in segment */ + u16 flags; +#define SA_FLAGS_DONE 0x0080 /* Done with Segment */ +#define SA_FLAGS_CONTINUED 0x8000 /* More Segments */ +#define SA_FLAGS_IDLE 0x4000 /* Mark IDLE after frm */ +#define SA_FLAGS_READY_TO_XMIT 0x0800 +#define SA_FLAGS_STAT_MASK 0x007F + } xmit[NUM_XBUFFS]; + + /**********************************************/ + /* Receive Status Area */ + /**********************************************/ + struct { + u32 leNext; /* Next entry in Little Endian on Adapter */ + u32 leNextASD; + u32 leBuffer; /* Buffer for entry in LE for Adapter */ + u16 WorkingLength; /* size of segment */ + u16 reserv01; + u16 leLength; /* Length of data in segment */ + u16 flags; +#define SA_FL_RCV_DONE 0x0010 /* Data ready */ +#define SA_FLAGS_OVERRUN 0x0040 +#define SA_FLAGS_PARITY_ERROR 0x0080 +#define SA_FLAGS_FRAME_ERROR 0x0001 +#define SA_FLAGS_FRAME_TRUNC 0x0002 +#define SA_FLAGS_BREAK_DET 0x0004 /* set conditionally by device driver, not hardware */ +#define SA_FLAGS_RCV_MASK 0xFFE6 + } rcv[NUM_RBUFFS]; +}; + +struct icom_adapter; + + +#define ICOM_MAJOR 243 +#define ICOM_MINOR_START 0 + +struct icom_port { + struct uart_port uart_port; + u8 imbed_modem; +#define ICOM_UNKNOWN 1 +#define ICOM_RVX 2 +#define ICOM_IMBED_MODEM 3 + unsigned char cable_id; + unsigned char read_status_mask; + unsigned char ignore_status_mask; + void __iomem * int_reg; + struct icom_regs __iomem *global_reg; + struct func_dram __iomem *dram; + int port; + struct statusArea *statStg; + dma_addr_t statStg_pci; + u32 *xmitRestart; + dma_addr_t xmitRestart_pci; + unsigned char *xmit_buf; + dma_addr_t xmit_buf_pci; + unsigned char *recv_buf; + dma_addr_t recv_buf_pci; + int next_rcv; + int put_length; + int status; +#define ICOM_PORT_ACTIVE 1 /* Port exists. */ +#define ICOM_PORT_OFF 0 /* Port does not exist. */ + int load_in_progress; + struct icom_adapter *adapter; +}; + +struct icom_adapter { + void __iomem * base_addr; + unsigned long base_addr_pci; + struct pci_dev *pci_dev; + struct icom_port port_info[4]; + int index; + int version; +#define ADAPTER_V1 0x0001 +#define ADAPTER_V2 0x0002 + u32 subsystem_id; +#define FOUR_PORT_MODEL 0x0252 +#define V2_TWO_PORTS_RVX 0x021A +#define V2_ONE_PORT_RVX_ONE_PORT_IMBED_MDM 0x0251 + int numb_ports; + struct list_head icom_adapter_entry; + struct kref kref; +}; + +/* prototype */ +extern void iCom_sercons_init(void); + +struct lookup_proc_table { + u32 __iomem *global_control_reg; + unsigned long processor_id; +}; + +struct lookup_int_table { + u32 __iomem *global_int_mask; + unsigned long processor_id; +}; diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c new file mode 100644 index 000000000..21d519c80 --- /dev/null +++ b/drivers/tty/serial/ifx6x60.c @@ -0,0 +1,1389 @@ +// SPDX-License-Identifier: GPL-2.0 +/**************************************************************************** + * + * Driver for the IFX 6x60 spi modem. + * + * Copyright (C) 2008 Option International + * Copyright (C) 2008 Filip Aben + * Denis Joseph Barrow + * Jan Dumon + * + * Copyright (C) 2009, 2010 Intel Corp + * Russ Gorby + * + * Driver modified by Intel from Option gtm501l_spi.c + * + * Notes + * o The driver currently assumes a single device only. If you need to + * change this then look for saved_ifx_dev and add a device lookup + * o The driver is intended to be big-endian safe but has never been + * tested that way (no suitable hardware). There are a couple of FIXME + * notes by areas that may need addressing + * o Some of the GPIO naming/setup assumptions may need revisiting if + * you need to use this driver for another platform. + * + *****************************************************************************/ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "ifx6x60.h" + +#define IFX_SPI_MORE_MASK 0x10 +#define IFX_SPI_MORE_BIT 4 /* bit position in u8 */ +#define IFX_SPI_CTS_BIT 6 /* bit position in u8 */ +#define IFX_SPI_MODE SPI_MODE_1 +#define IFX_SPI_TTY_ID 0 +#define IFX_SPI_TIMEOUT_SEC 2 +#define IFX_SPI_HEADER_0 (-1) +#define IFX_SPI_HEADER_F (-2) + +#define PO_POST_DELAY 200 + +/* forward reference */ +static void ifx_spi_handle_srdy(struct ifx_spi_device *ifx_dev); +static int ifx_modem_reboot_callback(struct notifier_block *nfb, + unsigned long event, void *data); +static int ifx_modem_power_off(struct ifx_spi_device *ifx_dev); + +/* local variables */ +static int spi_bpw = 16; /* 8, 16 or 32 bit word length */ +static struct tty_driver *tty_drv; +static struct ifx_spi_device *saved_ifx_dev; +static struct lock_class_key ifx_spi_key; + +static struct notifier_block ifx_modem_reboot_notifier_block = { + .notifier_call = ifx_modem_reboot_callback, +}; + +static int ifx_modem_power_off(struct ifx_spi_device *ifx_dev) +{ + gpiod_set_value(ifx_dev->gpio.pmu_reset, 1); + msleep(PO_POST_DELAY); + + return 0; +} + +static int ifx_modem_reboot_callback(struct notifier_block *nfb, + unsigned long event, void *data) +{ + if (saved_ifx_dev) + ifx_modem_power_off(saved_ifx_dev); + else + pr_warn("no ifx modem active;\n"); + + return NOTIFY_OK; +} + +/* GPIO/GPE settings */ + +/** + * mrdy_set_high - set MRDY GPIO + * @ifx: device we are controlling + * + */ +static inline void mrdy_set_high(struct ifx_spi_device *ifx) +{ + gpiod_set_value(ifx->gpio.mrdy, 1); +} + +/** + * mrdy_set_low - clear MRDY GPIO + * @ifx: device we are controlling + * + */ +static inline void mrdy_set_low(struct ifx_spi_device *ifx) +{ + gpiod_set_value(ifx->gpio.mrdy, 0); +} + +/** + * ifx_spi_power_state_set + * @ifx_dev: our SPI device + * @val: bits to set + * + * Set bit in power status and signal power system if status becomes non-0 + */ +static void +ifx_spi_power_state_set(struct ifx_spi_device *ifx_dev, unsigned char val) +{ + unsigned long flags; + + spin_lock_irqsave(&ifx_dev->power_lock, flags); + + /* + * if power status is already non-0, just update, else + * tell power system + */ + if (!ifx_dev->power_status) + pm_runtime_get(&ifx_dev->spi_dev->dev); + ifx_dev->power_status |= val; + + spin_unlock_irqrestore(&ifx_dev->power_lock, flags); +} + +/** + * ifx_spi_power_state_clear - clear power bit + * @ifx_dev: our SPI device + * @val: bits to clear + * + * clear bit in power status and signal power system if status becomes 0 + */ +static void +ifx_spi_power_state_clear(struct ifx_spi_device *ifx_dev, unsigned char val) +{ + unsigned long flags; + + spin_lock_irqsave(&ifx_dev->power_lock, flags); + + if (ifx_dev->power_status) { + ifx_dev->power_status &= ~val; + if (!ifx_dev->power_status) + pm_runtime_put(&ifx_dev->spi_dev->dev); + } + + spin_unlock_irqrestore(&ifx_dev->power_lock, flags); +} + +/** + * swap_buf_8 + * @buf: our buffer + * @len : number of bytes (not words) in the buffer + * @end: end of buffer + * + * Swap the contents of a buffer into big endian format + */ +static inline void swap_buf_8(unsigned char *buf, int len, void *end) +{ + /* don't swap buffer if SPI word width is 8 bits */ + return; +} + +/** + * swap_buf_16 + * @buf: our buffer + * @len : number of bytes (not words) in the buffer + * @end: end of buffer + * + * Swap the contents of a buffer into big endian format + */ +static inline void swap_buf_16(unsigned char *buf, int len, void *end) +{ + int n; + + u16 *buf_16 = (u16 *)buf; + len = ((len + 1) >> 1); + if ((void *)&buf_16[len] > end) { + pr_err("swap_buf_16: swap exceeds boundary (%p > %p)!", + &buf_16[len], end); + return; + } + for (n = 0; n < len; n++) { + *buf_16 = cpu_to_be16(*buf_16); + buf_16++; + } +} + +/** + * swap_buf_32 + * @buf: our buffer + * @len : number of bytes (not words) in the buffer + * @end: end of buffer + * + * Swap the contents of a buffer into big endian format + */ +static inline void swap_buf_32(unsigned char *buf, int len, void *end) +{ + int n; + + u32 *buf_32 = (u32 *)buf; + len = (len + 3) >> 2; + + if ((void *)&buf_32[len] > end) { + pr_err("swap_buf_32: swap exceeds boundary (%p > %p)!\n", + &buf_32[len], end); + return; + } + for (n = 0; n < len; n++) { + *buf_32 = cpu_to_be32(*buf_32); + buf_32++; + } +} + +/** + * mrdy_assert - assert MRDY line + * @ifx_dev: our SPI device + * + * Assert mrdy and set timer to wait for SRDY interrupt, if SRDY is low + * now. + * + * FIXME: Can SRDY even go high as we are running this code ? + */ +static void mrdy_assert(struct ifx_spi_device *ifx_dev) +{ + int val = gpiod_get_value(ifx_dev->gpio.srdy); + if (!val) { + if (!test_and_set_bit(IFX_SPI_STATE_TIMER_PENDING, + &ifx_dev->flags)) { + mod_timer(&ifx_dev->spi_timer,jiffies + IFX_SPI_TIMEOUT_SEC*HZ); + + } + } + ifx_spi_power_state_set(ifx_dev, IFX_SPI_POWER_DATA_PENDING); + mrdy_set_high(ifx_dev); +} + +/** + * ifx_spi_timeout - SPI timeout + * @t: timer in our SPI device + * + * The SPI has timed out: hang up the tty. Users will then see a hangup + * and error events. + */ +static void ifx_spi_timeout(struct timer_list *t) +{ + struct ifx_spi_device *ifx_dev = from_timer(ifx_dev, t, spi_timer); + + dev_warn(&ifx_dev->spi_dev->dev, "*** SPI Timeout ***"); + tty_port_tty_hangup(&ifx_dev->tty_port, false); + mrdy_set_low(ifx_dev); + clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags); +} + +/* char/tty operations */ + +/** + * ifx_spi_tiocmget - get modem lines + * @tty: our tty device + * + * Map the signal state into Linux modem flags and report the value + * in Linux terms + */ +static int ifx_spi_tiocmget(struct tty_struct *tty) +{ + unsigned int value; + struct ifx_spi_device *ifx_dev = tty->driver_data; + + value = + (test_bit(IFX_SPI_RTS, &ifx_dev->signal_state) ? TIOCM_RTS : 0) | + (test_bit(IFX_SPI_DTR, &ifx_dev->signal_state) ? TIOCM_DTR : 0) | + (test_bit(IFX_SPI_CTS, &ifx_dev->signal_state) ? TIOCM_CTS : 0) | + (test_bit(IFX_SPI_DSR, &ifx_dev->signal_state) ? TIOCM_DSR : 0) | + (test_bit(IFX_SPI_DCD, &ifx_dev->signal_state) ? TIOCM_CAR : 0) | + (test_bit(IFX_SPI_RI, &ifx_dev->signal_state) ? TIOCM_RNG : 0); + return value; +} + +/** + * ifx_spi_tiocmset - set modem bits + * @tty: the tty structure + * @set: bits to set + * @clear: bits to clear + * + * The IFX6x60 only supports DTR and RTS. Set them accordingly + * and flag that an update to the modem is needed. + * + * FIXME: do we need to kick the tranfers when we do this ? + */ +static int ifx_spi_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct ifx_spi_device *ifx_dev = tty->driver_data; + + if (set & TIOCM_RTS) + set_bit(IFX_SPI_RTS, &ifx_dev->signal_state); + if (set & TIOCM_DTR) + set_bit(IFX_SPI_DTR, &ifx_dev->signal_state); + if (clear & TIOCM_RTS) + clear_bit(IFX_SPI_RTS, &ifx_dev->signal_state); + if (clear & TIOCM_DTR) + clear_bit(IFX_SPI_DTR, &ifx_dev->signal_state); + + set_bit(IFX_SPI_UPDATE, &ifx_dev->signal_state); + return 0; +} + +/** + * ifx_spi_open - called on tty open + * @tty: our tty device + * @filp: file handle being associated with the tty + * + * Open the tty interface. We let the tty_port layer do all the work + * for us. + * + * FIXME: Remove single device assumption and saved_ifx_dev + */ +static int ifx_spi_open(struct tty_struct *tty, struct file *filp) +{ + return tty_port_open(&saved_ifx_dev->tty_port, tty, filp); +} + +/** + * ifx_spi_close - called when our tty closes + * @tty: the tty being closed + * @filp: the file handle being closed + * + * Perform the close of the tty. We use the tty_port layer to do all + * our hard work. + */ +static void ifx_spi_close(struct tty_struct *tty, struct file *filp) +{ + struct ifx_spi_device *ifx_dev = tty->driver_data; + tty_port_close(&ifx_dev->tty_port, tty, filp); + /* FIXME: should we do an ifx_spi_reset here ? */ +} + +/** + * ifx_decode_spi_header - decode received header + * @buffer: the received data + * @length: decoded length + * @more: decoded more flag + * @received_cts: status of cts we received + * + * Note how received_cts is handled -- if header is all F it is left + * the same as it was, if header is all 0 it is set to 0 otherwise it is + * taken from the incoming header. + * + * FIXME: endianness + */ +static int ifx_spi_decode_spi_header(unsigned char *buffer, int *length, + unsigned char *more, unsigned char *received_cts) +{ + u16 h1; + u16 h2; + u16 *in_buffer = (u16 *)buffer; + + h1 = *in_buffer; + h2 = *(in_buffer+1); + + if (h1 == 0 && h2 == 0) { + *received_cts = 0; + *more = 0; + return IFX_SPI_HEADER_0; + } else if (h1 == 0xffff && h2 == 0xffff) { + *more = 0; + /* spi_slave_cts remains as it was */ + return IFX_SPI_HEADER_F; + } + + *length = h1 & 0xfff; /* upper bits of byte are flags */ + *more = (buffer[1] >> IFX_SPI_MORE_BIT) & 1; + *received_cts = (buffer[3] >> IFX_SPI_CTS_BIT) & 1; + return 0; +} + +/** + * ifx_setup_spi_header - set header fields + * @txbuffer: pointer to start of SPI buffer + * @tx_count: bytes + * @more: indicate if more to follow + * + * Format up an SPI header for a transfer + * + * FIXME: endianness? + */ +static void ifx_spi_setup_spi_header(unsigned char *txbuffer, int tx_count, + unsigned char more) +{ + *(u16 *)(txbuffer) = tx_count; + *(u16 *)(txbuffer+2) = IFX_SPI_PAYLOAD_SIZE; + txbuffer[1] |= (more << IFX_SPI_MORE_BIT) & IFX_SPI_MORE_MASK; +} + +/** + * ifx_spi_prepare_tx_buffer - prepare transmit frame + * @ifx_dev: our SPI device + * + * The transmit buffr needs a header and various other bits of + * information followed by as much data as we can pull from the FIFO + * and transfer. This function formats up a suitable buffer in the + * ifx_dev->tx_buffer + * + * FIXME: performance - should we wake the tty when the queue is half + * empty ? + */ +static int ifx_spi_prepare_tx_buffer(struct ifx_spi_device *ifx_dev) +{ + int temp_count; + int queue_length; + int tx_count; + unsigned char *tx_buffer; + + tx_buffer = ifx_dev->tx_buffer; + + /* make room for required SPI header */ + tx_buffer += IFX_SPI_HEADER_OVERHEAD; + tx_count = IFX_SPI_HEADER_OVERHEAD; + + /* clear to signal no more data if this turns out to be the + * last buffer sent in a sequence */ + ifx_dev->spi_more = 0; + + /* if modem cts is set, just send empty buffer */ + if (!ifx_dev->spi_slave_cts) { + /* see if there's tx data */ + queue_length = kfifo_len(&ifx_dev->tx_fifo); + if (queue_length != 0) { + /* data to mux -- see if there's room for it */ + temp_count = min(queue_length, IFX_SPI_PAYLOAD_SIZE); + temp_count = kfifo_out_locked(&ifx_dev->tx_fifo, + tx_buffer, temp_count, + &ifx_dev->fifo_lock); + + /* update buffer pointer and data count in message */ + tx_buffer += temp_count; + tx_count += temp_count; + if (temp_count == queue_length) + /* poke port to get more data */ + tty_port_tty_wakeup(&ifx_dev->tty_port); + else /* more data in port, use next SPI message */ + ifx_dev->spi_more = 1; + } + } + /* have data and info for header -- set up SPI header in buffer */ + /* spi header needs payload size, not entire buffer size */ + ifx_spi_setup_spi_header(ifx_dev->tx_buffer, + tx_count-IFX_SPI_HEADER_OVERHEAD, + ifx_dev->spi_more); + /* swap actual data in the buffer */ + ifx_dev->swap_buf((ifx_dev->tx_buffer), tx_count, + &ifx_dev->tx_buffer[IFX_SPI_TRANSFER_SIZE]); + return tx_count; +} + +/** + * ifx_spi_write - line discipline write + * @tty: our tty device + * @buf: pointer to buffer to write (kernel space) + * @count: size of buffer + * + * Write the characters we have been given into the FIFO. If the device + * is not active then activate it, when the SRDY line is asserted back + * this will commence I/O + */ +static int ifx_spi_write(struct tty_struct *tty, const unsigned char *buf, + int count) +{ + struct ifx_spi_device *ifx_dev = tty->driver_data; + unsigned char *tmp_buf = (unsigned char *)buf; + unsigned long flags; + bool is_fifo_empty; + int tx_count; + + spin_lock_irqsave(&ifx_dev->fifo_lock, flags); + is_fifo_empty = kfifo_is_empty(&ifx_dev->tx_fifo); + tx_count = kfifo_in(&ifx_dev->tx_fifo, tmp_buf, count); + spin_unlock_irqrestore(&ifx_dev->fifo_lock, flags); + if (is_fifo_empty) + mrdy_assert(ifx_dev); + + return tx_count; +} + +/** + * ifx_spi_chars_in_buffer - line discipline helper + * @tty: our tty device + * + * Report how much data we can accept before we drop bytes. As we use + * a simple FIFO this is nice and easy. + */ +static int ifx_spi_write_room(struct tty_struct *tty) +{ + struct ifx_spi_device *ifx_dev = tty->driver_data; + return IFX_SPI_FIFO_SIZE - kfifo_len(&ifx_dev->tx_fifo); +} + +/** + * ifx_spi_chars_in_buffer - line discipline helper + * @tty: our tty device + * + * Report how many characters we have buffered. In our case this is the + * number of bytes sitting in our transmit FIFO. + */ +static int ifx_spi_chars_in_buffer(struct tty_struct *tty) +{ + struct ifx_spi_device *ifx_dev = tty->driver_data; + return kfifo_len(&ifx_dev->tx_fifo); +} + +/** + * ifx_port_hangup + * @tty: our tty + * + * tty port hang up. Called when tty_hangup processing is invoked either + * by loss of carrier, or by software (eg vhangup). Serialized against + * activate/shutdown by the tty layer. + */ +static void ifx_spi_hangup(struct tty_struct *tty) +{ + struct ifx_spi_device *ifx_dev = tty->driver_data; + tty_port_hangup(&ifx_dev->tty_port); +} + +/** + * ifx_port_activate + * @port: our tty port + * + * tty port activate method - called for first open. Serialized + * with hangup and shutdown by the tty layer. + */ +static int ifx_port_activate(struct tty_port *port, struct tty_struct *tty) +{ + struct ifx_spi_device *ifx_dev = + container_of(port, struct ifx_spi_device, tty_port); + + /* clear any old data; can't do this in 'close' */ + kfifo_reset(&ifx_dev->tx_fifo); + + /* clear any flag which may be set in port shutdown procedure */ + clear_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &ifx_dev->flags); + clear_bit(IFX_SPI_STATE_IO_READY, &ifx_dev->flags); + + /* put port data into this tty */ + tty->driver_data = ifx_dev; + + /* allows flip string push from int context */ + port->low_latency = 1; + + /* set flag to allows data transfer */ + set_bit(IFX_SPI_STATE_IO_AVAILABLE, &ifx_dev->flags); + + return 0; +} + +/** + * ifx_port_shutdown + * @port: our tty port + * + * tty port shutdown method - called for last port close. Serialized + * with hangup and activate by the tty layer. + */ +static void ifx_port_shutdown(struct tty_port *port) +{ + struct ifx_spi_device *ifx_dev = + container_of(port, struct ifx_spi_device, tty_port); + + clear_bit(IFX_SPI_STATE_IO_AVAILABLE, &ifx_dev->flags); + mrdy_set_low(ifx_dev); + del_timer(&ifx_dev->spi_timer); + clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags); + tasklet_kill(&ifx_dev->io_work_tasklet); +} + +static const struct tty_port_operations ifx_tty_port_ops = { + .activate = ifx_port_activate, + .shutdown = ifx_port_shutdown, +}; + +static const struct tty_operations ifx_spi_serial_ops = { + .open = ifx_spi_open, + .close = ifx_spi_close, + .write = ifx_spi_write, + .hangup = ifx_spi_hangup, + .write_room = ifx_spi_write_room, + .chars_in_buffer = ifx_spi_chars_in_buffer, + .tiocmget = ifx_spi_tiocmget, + .tiocmset = ifx_spi_tiocmset, +}; + +/** + * ifx_spi_insert_fip_string - queue received data + * @ifx_dev: our SPI device + * @chars: buffer we have received + * @size: number of chars reeived + * + * Queue bytes to the tty assuming the tty side is currently open. If + * not the discard the data. + */ +static void ifx_spi_insert_flip_string(struct ifx_spi_device *ifx_dev, + unsigned char *chars, size_t size) +{ + tty_insert_flip_string(&ifx_dev->tty_port, chars, size); + tty_flip_buffer_push(&ifx_dev->tty_port); +} + +/** + * ifx_spi_complete - SPI transfer completed + * @ctx: our SPI device + * + * An SPI transfer has completed. Process any received data and kick off + * any further transmits we can commence. + */ +static void ifx_spi_complete(void *ctx) +{ + struct ifx_spi_device *ifx_dev = ctx; + int length; + int actual_length; + unsigned char more = 0; + unsigned char cts; + int local_write_pending = 0; + int queue_length; + int srdy; + int decode_result; + + mrdy_set_low(ifx_dev); + + if (!ifx_dev->spi_msg.status) { + /* check header validity, get comm flags */ + ifx_dev->swap_buf(ifx_dev->rx_buffer, IFX_SPI_HEADER_OVERHEAD, + &ifx_dev->rx_buffer[IFX_SPI_HEADER_OVERHEAD]); + decode_result = ifx_spi_decode_spi_header(ifx_dev->rx_buffer, + &length, &more, &cts); + if (decode_result == IFX_SPI_HEADER_0) { + dev_dbg(&ifx_dev->spi_dev->dev, + "ignore input: invalid header 0"); + ifx_dev->spi_slave_cts = 0; + goto complete_exit; + } else if (decode_result == IFX_SPI_HEADER_F) { + dev_dbg(&ifx_dev->spi_dev->dev, + "ignore input: invalid header F"); + goto complete_exit; + } + + ifx_dev->spi_slave_cts = cts; + + actual_length = min((unsigned int)length, + ifx_dev->spi_msg.actual_length); + ifx_dev->swap_buf( + (ifx_dev->rx_buffer + IFX_SPI_HEADER_OVERHEAD), + actual_length, + &ifx_dev->rx_buffer[IFX_SPI_TRANSFER_SIZE]); + ifx_spi_insert_flip_string( + ifx_dev, + ifx_dev->rx_buffer + IFX_SPI_HEADER_OVERHEAD, + (size_t)actual_length); + } else { + more = 0; + dev_dbg(&ifx_dev->spi_dev->dev, "SPI transfer error %d", + ifx_dev->spi_msg.status); + } + +complete_exit: + if (ifx_dev->write_pending) { + ifx_dev->write_pending = 0; + local_write_pending = 1; + } + + clear_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &(ifx_dev->flags)); + + queue_length = kfifo_len(&ifx_dev->tx_fifo); + srdy = gpiod_get_value(ifx_dev->gpio.srdy); + if (!srdy) + ifx_spi_power_state_clear(ifx_dev, IFX_SPI_POWER_SRDY); + + /* schedule output if there is more to do */ + if (test_and_clear_bit(IFX_SPI_STATE_IO_READY, &ifx_dev->flags)) + tasklet_schedule(&ifx_dev->io_work_tasklet); + else { + if (more || ifx_dev->spi_more || queue_length > 0 || + local_write_pending) { + if (ifx_dev->spi_slave_cts) { + if (more) + mrdy_assert(ifx_dev); + } else + mrdy_assert(ifx_dev); + } else { + /* + * poke line discipline driver if any for more data + * may or may not get more data to write + * for now, say not busy + */ + ifx_spi_power_state_clear(ifx_dev, + IFX_SPI_POWER_DATA_PENDING); + tty_port_tty_wakeup(&ifx_dev->tty_port); + } + } +} + +/** + * ifx_spio_io - I/O tasklet + * @data: our SPI device + * + * Queue data for transmission if possible and then kick off the + * transfer. + */ +static void ifx_spi_io(struct tasklet_struct *t) +{ + int retval; + struct ifx_spi_device *ifx_dev = from_tasklet(ifx_dev, t, + io_work_tasklet); + + if (!test_and_set_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &ifx_dev->flags) && + test_bit(IFX_SPI_STATE_IO_AVAILABLE, &ifx_dev->flags)) { + if (ifx_dev->gpio.unack_srdy_int_nb > 0) + ifx_dev->gpio.unack_srdy_int_nb--; + + ifx_spi_prepare_tx_buffer(ifx_dev); + + spi_message_init(&ifx_dev->spi_msg); + INIT_LIST_HEAD(&ifx_dev->spi_msg.queue); + + ifx_dev->spi_msg.context = ifx_dev; + ifx_dev->spi_msg.complete = ifx_spi_complete; + + /* set up our spi transfer */ + /* note len is BYTES, not transfers */ + ifx_dev->spi_xfer.len = IFX_SPI_TRANSFER_SIZE; + ifx_dev->spi_xfer.cs_change = 0; + ifx_dev->spi_xfer.speed_hz = ifx_dev->spi_dev->max_speed_hz; + /* ifx_dev->spi_xfer.speed_hz = 390625; */ + ifx_dev->spi_xfer.bits_per_word = + ifx_dev->spi_dev->bits_per_word; + + ifx_dev->spi_xfer.tx_buf = ifx_dev->tx_buffer; + ifx_dev->spi_xfer.rx_buf = ifx_dev->rx_buffer; + + /* + * setup dma pointers + */ + if (ifx_dev->use_dma) { + ifx_dev->spi_msg.is_dma_mapped = 1; + ifx_dev->tx_dma = ifx_dev->tx_bus; + ifx_dev->rx_dma = ifx_dev->rx_bus; + ifx_dev->spi_xfer.tx_dma = ifx_dev->tx_dma; + ifx_dev->spi_xfer.rx_dma = ifx_dev->rx_dma; + } else { + ifx_dev->spi_msg.is_dma_mapped = 0; + ifx_dev->tx_dma = (dma_addr_t)0; + ifx_dev->rx_dma = (dma_addr_t)0; + ifx_dev->spi_xfer.tx_dma = (dma_addr_t)0; + ifx_dev->spi_xfer.rx_dma = (dma_addr_t)0; + } + + spi_message_add_tail(&ifx_dev->spi_xfer, &ifx_dev->spi_msg); + + /* Assert MRDY. This may have already been done by the write + * routine. + */ + mrdy_assert(ifx_dev); + + retval = spi_async(ifx_dev->spi_dev, &ifx_dev->spi_msg); + if (retval) { + clear_bit(IFX_SPI_STATE_IO_IN_PROGRESS, + &ifx_dev->flags); + tasklet_schedule(&ifx_dev->io_work_tasklet); + return; + } + } else + ifx_dev->write_pending = 1; +} + +/** + * ifx_spi_free_port - free up the tty side + * @ifx_dev: IFX device going away + * + * Unregister and free up a port when the device goes away + */ +static void ifx_spi_free_port(struct ifx_spi_device *ifx_dev) +{ + if (ifx_dev->tty_dev) + tty_unregister_device(tty_drv, ifx_dev->minor); + tty_port_destroy(&ifx_dev->tty_port); + kfifo_free(&ifx_dev->tx_fifo); +} + +/** + * ifx_spi_create_port - create a new port + * @ifx_dev: our spi device + * + * Allocate and initialise the tty port that goes with this interface + * and add it to the tty layer so that it can be opened. + */ +static int ifx_spi_create_port(struct ifx_spi_device *ifx_dev) +{ + int ret = 0; + struct tty_port *pport = &ifx_dev->tty_port; + + spin_lock_init(&ifx_dev->fifo_lock); + lockdep_set_class_and_subclass(&ifx_dev->fifo_lock, + &ifx_spi_key, 0); + + if (kfifo_alloc(&ifx_dev->tx_fifo, IFX_SPI_FIFO_SIZE, GFP_KERNEL)) { + ret = -ENOMEM; + goto error_ret; + } + + tty_port_init(pport); + pport->ops = &ifx_tty_port_ops; + ifx_dev->minor = IFX_SPI_TTY_ID; + ifx_dev->tty_dev = tty_port_register_device(pport, tty_drv, + ifx_dev->minor, &ifx_dev->spi_dev->dev); + if (IS_ERR(ifx_dev->tty_dev)) { + dev_dbg(&ifx_dev->spi_dev->dev, + "%s: registering tty device failed", __func__); + ret = PTR_ERR(ifx_dev->tty_dev); + goto error_port; + } + return 0; + +error_port: + tty_port_destroy(pport); +error_ret: + ifx_spi_free_port(ifx_dev); + return ret; +} + +/** + * ifx_spi_handle_srdy - handle SRDY + * @ifx_dev: device asserting SRDY + * + * Check our device state and see what we need to kick off when SRDY + * is asserted. This usually means killing the timer and firing off the + * I/O processing. + */ +static void ifx_spi_handle_srdy(struct ifx_spi_device *ifx_dev) +{ + if (test_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags)) { + del_timer(&ifx_dev->spi_timer); + clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags); + } + + ifx_spi_power_state_set(ifx_dev, IFX_SPI_POWER_SRDY); + + if (!test_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &ifx_dev->flags)) + tasklet_schedule(&ifx_dev->io_work_tasklet); + else + set_bit(IFX_SPI_STATE_IO_READY, &ifx_dev->flags); +} + +/** + * ifx_spi_srdy_interrupt - SRDY asserted + * @irq: our IRQ number + * @dev: our ifx device + * + * The modem asserted SRDY. Handle the srdy event + */ +static irqreturn_t ifx_spi_srdy_interrupt(int irq, void *dev) +{ + struct ifx_spi_device *ifx_dev = dev; + ifx_dev->gpio.unack_srdy_int_nb++; + ifx_spi_handle_srdy(ifx_dev); + return IRQ_HANDLED; +} + +/** + * ifx_spi_reset_interrupt - Modem has changed reset state + * @irq: interrupt number + * @dev: our device pointer + * + * The modem has either entered or left reset state. Check the GPIO + * line to see which. + * + * FIXME: review locking on MR_INPROGRESS versus + * parallel unsolicited reset/solicited reset + */ +static irqreturn_t ifx_spi_reset_interrupt(int irq, void *dev) +{ + struct ifx_spi_device *ifx_dev = dev; + int val = gpiod_get_value(ifx_dev->gpio.reset_out); + int solreset = test_bit(MR_START, &ifx_dev->mdm_reset_state); + + if (val == 0) { + /* entered reset */ + set_bit(MR_INPROGRESS, &ifx_dev->mdm_reset_state); + if (!solreset) { + /* unsolicited reset */ + tty_port_tty_hangup(&ifx_dev->tty_port, false); + } + } else { + /* exited reset */ + clear_bit(MR_INPROGRESS, &ifx_dev->mdm_reset_state); + if (solreset) { + set_bit(MR_COMPLETE, &ifx_dev->mdm_reset_state); + wake_up(&ifx_dev->mdm_reset_wait); + } + } + return IRQ_HANDLED; +} + +/** + * ifx_spi_free_device - free device + * @ifx_dev: device to free + * + * Free the IFX device + */ +static void ifx_spi_free_device(struct ifx_spi_device *ifx_dev) +{ + ifx_spi_free_port(ifx_dev); + dma_free_coherent(&ifx_dev->spi_dev->dev, + IFX_SPI_TRANSFER_SIZE, + ifx_dev->tx_buffer, + ifx_dev->tx_bus); + dma_free_coherent(&ifx_dev->spi_dev->dev, + IFX_SPI_TRANSFER_SIZE, + ifx_dev->rx_buffer, + ifx_dev->rx_bus); +} + +/** + * ifx_spi_reset - reset modem + * @ifx_dev: modem to reset + * + * Perform a reset on the modem + */ +static int ifx_spi_reset(struct ifx_spi_device *ifx_dev) +{ + int ret; + /* + * set up modem power, reset + * + * delays are required on some platforms for the modem + * to reset properly + */ + set_bit(MR_START, &ifx_dev->mdm_reset_state); + gpiod_set_value(ifx_dev->gpio.po, 0); + gpiod_set_value(ifx_dev->gpio.reset, 0); + msleep(25); + gpiod_set_value(ifx_dev->gpio.reset, 1); + msleep(1); + gpiod_set_value(ifx_dev->gpio.po, 1); + msleep(1); + gpiod_set_value(ifx_dev->gpio.po, 0); + ret = wait_event_timeout(ifx_dev->mdm_reset_wait, + test_bit(MR_COMPLETE, + &ifx_dev->mdm_reset_state), + IFX_RESET_TIMEOUT); + if (!ret) + dev_warn(&ifx_dev->spi_dev->dev, "Modem reset timeout: (state:%lx)", + ifx_dev->mdm_reset_state); + + ifx_dev->mdm_reset_state = 0; + return ret; +} + +/** + * ifx_spi_spi_probe - probe callback + * @spi: our possible matching SPI device + * + * Probe for a 6x60 modem on SPI bus. Perform any needed device and + * GPIO setup. + * + * FIXME: + * - Support for multiple devices + * - Split out MID specific GPIO handling eventually + */ + +static int ifx_spi_spi_probe(struct spi_device *spi) +{ + int ret; + int srdy; + struct ifx_modem_platform_data *pl_data; + struct ifx_spi_device *ifx_dev; + struct device *dev = &spi->dev; + + if (saved_ifx_dev) { + dev_dbg(dev, "ignoring subsequent detection"); + return -ENODEV; + } + + pl_data = dev_get_platdata(dev); + if (!pl_data) { + dev_err(dev, "missing platform data!"); + return -ENODEV; + } + + /* initialize structure to hold our device variables */ + ifx_dev = kzalloc(sizeof(struct ifx_spi_device), GFP_KERNEL); + if (!ifx_dev) { + dev_err(dev, "spi device allocation failed"); + return -ENOMEM; + } + saved_ifx_dev = ifx_dev; + ifx_dev->spi_dev = spi; + clear_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &ifx_dev->flags); + spin_lock_init(&ifx_dev->write_lock); + spin_lock_init(&ifx_dev->power_lock); + ifx_dev->power_status = 0; + timer_setup(&ifx_dev->spi_timer, ifx_spi_timeout, 0); + ifx_dev->modem = pl_data->modem_type; + ifx_dev->use_dma = pl_data->use_dma; + ifx_dev->max_hz = pl_data->max_hz; + /* initialize spi mode, etc */ + spi->max_speed_hz = ifx_dev->max_hz; + spi->mode = IFX_SPI_MODE | (SPI_LOOP & spi->mode); + spi->bits_per_word = spi_bpw; + ret = spi_setup(spi); + if (ret) { + dev_err(dev, "SPI setup wasn't successful %d", ret); + kfree(ifx_dev); + return -ENODEV; + } + + /* init swap_buf function according to word width configuration */ + if (spi->bits_per_word == 32) + ifx_dev->swap_buf = swap_buf_32; + else if (spi->bits_per_word == 16) + ifx_dev->swap_buf = swap_buf_16; + else + ifx_dev->swap_buf = swap_buf_8; + + /* ensure SPI protocol flags are initialized to enable transfer */ + ifx_dev->spi_more = 0; + ifx_dev->spi_slave_cts = 0; + + /*initialize transfer and dma buffers */ + ifx_dev->tx_buffer = dma_alloc_coherent(ifx_dev->spi_dev->dev.parent, + IFX_SPI_TRANSFER_SIZE, + &ifx_dev->tx_bus, + GFP_KERNEL); + if (!ifx_dev->tx_buffer) { + dev_err(dev, "DMA-TX buffer allocation failed"); + ret = -ENOMEM; + goto error_ret; + } + ifx_dev->rx_buffer = dma_alloc_coherent(ifx_dev->spi_dev->dev.parent, + IFX_SPI_TRANSFER_SIZE, + &ifx_dev->rx_bus, + GFP_KERNEL); + if (!ifx_dev->rx_buffer) { + dev_err(dev, "DMA-RX buffer allocation failed"); + ret = -ENOMEM; + goto error_ret; + } + + /* initialize waitq for modem reset */ + init_waitqueue_head(&ifx_dev->mdm_reset_wait); + + spi_set_drvdata(spi, ifx_dev); + tasklet_setup(&ifx_dev->io_work_tasklet, ifx_spi_io); + + set_bit(IFX_SPI_STATE_PRESENT, &ifx_dev->flags); + + /* create our tty port */ + ret = ifx_spi_create_port(ifx_dev); + if (ret != 0) { + dev_err(dev, "create default tty port failed"); + goto error_ret; + } + + ifx_dev->gpio.reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(ifx_dev->gpio.reset)) { + dev_err(dev, "could not obtain reset GPIO\n"); + ret = PTR_ERR(ifx_dev->gpio.reset); + goto error_ret; + } + gpiod_set_consumer_name(ifx_dev->gpio.reset, "ifxModem reset"); + ifx_dev->gpio.po = devm_gpiod_get(dev, "power", GPIOD_OUT_LOW); + if (IS_ERR(ifx_dev->gpio.po)) { + dev_err(dev, "could not obtain power GPIO\n"); + ret = PTR_ERR(ifx_dev->gpio.po); + goto error_ret; + } + gpiod_set_consumer_name(ifx_dev->gpio.po, "ifxModem power"); + ifx_dev->gpio.mrdy = devm_gpiod_get(dev, "mrdy", GPIOD_OUT_LOW); + if (IS_ERR(ifx_dev->gpio.mrdy)) { + dev_err(dev, "could not obtain mrdy GPIO\n"); + ret = PTR_ERR(ifx_dev->gpio.mrdy); + goto error_ret; + } + gpiod_set_consumer_name(ifx_dev->gpio.mrdy, "ifxModem mrdy"); + ifx_dev->gpio.srdy = devm_gpiod_get(dev, "srdy", GPIOD_IN); + if (IS_ERR(ifx_dev->gpio.srdy)) { + dev_err(dev, "could not obtain srdy GPIO\n"); + ret = PTR_ERR(ifx_dev->gpio.srdy); + goto error_ret; + } + gpiod_set_consumer_name(ifx_dev->gpio.srdy, "ifxModem srdy"); + ifx_dev->gpio.reset_out = devm_gpiod_get(dev, "rst_out", GPIOD_IN); + if (IS_ERR(ifx_dev->gpio.reset_out)) { + dev_err(dev, "could not obtain rst_out GPIO\n"); + ret = PTR_ERR(ifx_dev->gpio.reset_out); + goto error_ret; + } + gpiod_set_consumer_name(ifx_dev->gpio.reset_out, "ifxModem reset out"); + ifx_dev->gpio.pmu_reset = devm_gpiod_get(dev, "pmu_reset", GPIOD_ASIS); + if (IS_ERR(ifx_dev->gpio.pmu_reset)) { + dev_err(dev, "could not obtain pmu_reset GPIO\n"); + ret = PTR_ERR(ifx_dev->gpio.pmu_reset); + goto error_ret; + } + gpiod_set_consumer_name(ifx_dev->gpio.pmu_reset, "ifxModem PMU reset"); + + ret = request_irq(gpiod_to_irq(ifx_dev->gpio.reset_out), + ifx_spi_reset_interrupt, + IRQF_TRIGGER_RISING|IRQF_TRIGGER_FALLING, DRVNAME, + ifx_dev); + if (ret) { + dev_err(dev, "Unable to get irq %x\n", + gpiod_to_irq(ifx_dev->gpio.reset_out)); + goto error_ret; + } + + ret = ifx_spi_reset(ifx_dev); + + ret = request_irq(gpiod_to_irq(ifx_dev->gpio.srdy), + ifx_spi_srdy_interrupt, IRQF_TRIGGER_RISING, DRVNAME, + ifx_dev); + if (ret) { + dev_err(dev, "Unable to get irq %x", + gpiod_to_irq(ifx_dev->gpio.srdy)); + goto error_ret2; + } + + /* set pm runtime power state and register with power system */ + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + + /* handle case that modem is already signaling SRDY */ + /* no outgoing tty open at this point, this just satisfies the + * modem's read and should reset communication properly + */ + srdy = gpiod_get_value(ifx_dev->gpio.srdy); + + if (srdy) { + mrdy_assert(ifx_dev); + ifx_spi_handle_srdy(ifx_dev); + } else + mrdy_set_low(ifx_dev); + return 0; + +error_ret2: + free_irq(gpiod_to_irq(ifx_dev->gpio.reset_out), ifx_dev); +error_ret: + ifx_spi_free_device(ifx_dev); + saved_ifx_dev = NULL; + return ret; +} + +/** + * ifx_spi_spi_remove - SPI device was removed + * @spi: SPI device + * + * FIXME: We should be shutting the device down here not in + * the module unload path. + */ + +static int ifx_spi_spi_remove(struct spi_device *spi) +{ + struct ifx_spi_device *ifx_dev = spi_get_drvdata(spi); + /* stop activity */ + tasklet_kill(&ifx_dev->io_work_tasklet); + + pm_runtime_disable(&spi->dev); + + /* free irq */ + free_irq(gpiod_to_irq(ifx_dev->gpio.reset_out), ifx_dev); + free_irq(gpiod_to_irq(ifx_dev->gpio.srdy), ifx_dev); + + /* free allocations */ + ifx_spi_free_device(ifx_dev); + + saved_ifx_dev = NULL; + return 0; +} + +/** + * ifx_spi_spi_shutdown - called on SPI shutdown + * @spi: SPI device + * + * No action needs to be taken here + */ + +static void ifx_spi_spi_shutdown(struct spi_device *spi) +{ + struct ifx_spi_device *ifx_dev = spi_get_drvdata(spi); + + ifx_modem_power_off(ifx_dev); +} + +/* + * various suspends and resumes have nothing to do + * no hardware to save state for + */ + +/** + * ifx_spi_pm_suspend - suspend modem on system suspend + * @dev: device being suspended + * + * Suspend the modem. No action needed on Intel MID platforms, may + * need extending for other systems. + */ +static int ifx_spi_pm_suspend(struct device *dev) +{ + return 0; +} + +/** + * ifx_spi_pm_resume - resume modem on system resume + * @dev: device being suspended + * + * Allow the modem to resume. No action needed. + * + * FIXME: do we need to reset anything here ? + */ +static int ifx_spi_pm_resume(struct device *dev) +{ + return 0; +} + +/** + * ifx_spi_pm_runtime_resume - suspend modem + * @dev: device being suspended + * + * Allow the modem to resume. No action needed. + */ +static int ifx_spi_pm_runtime_resume(struct device *dev) +{ + return 0; +} + +/** + * ifx_spi_pm_runtime_suspend - suspend modem + * @dev: device being suspended + * + * Allow the modem to suspend and thus suspend to continue up the + * device tree. + */ +static int ifx_spi_pm_runtime_suspend(struct device *dev) +{ + return 0; +} + +/** + * ifx_spi_pm_runtime_idle - check if modem idle + * @dev: our device + * + * Check conditions and queue runtime suspend if idle. + */ +static int ifx_spi_pm_runtime_idle(struct device *dev) +{ + struct spi_device *spi = to_spi_device(dev); + struct ifx_spi_device *ifx_dev = spi_get_drvdata(spi); + + if (!ifx_dev->power_status) + pm_runtime_suspend(dev); + + return 0; +} + +static const struct dev_pm_ops ifx_spi_pm = { + .resume = ifx_spi_pm_resume, + .suspend = ifx_spi_pm_suspend, + .runtime_resume = ifx_spi_pm_runtime_resume, + .runtime_suspend = ifx_spi_pm_runtime_suspend, + .runtime_idle = ifx_spi_pm_runtime_idle +}; + +static const struct spi_device_id ifx_id_table[] = { + {"ifx6160", 0}, + {"ifx6260", 0}, + { } +}; +MODULE_DEVICE_TABLE(spi, ifx_id_table); + +/* spi operations */ +static struct spi_driver ifx_spi_driver = { + .driver = { + .name = DRVNAME, + .pm = &ifx_spi_pm, + }, + .probe = ifx_spi_spi_probe, + .shutdown = ifx_spi_spi_shutdown, + .remove = ifx_spi_spi_remove, + .id_table = ifx_id_table +}; + +/** + * ifx_spi_exit - module exit + * + * Unload the module. + */ + +static void __exit ifx_spi_exit(void) +{ + /* unregister */ + spi_unregister_driver(&ifx_spi_driver); + tty_unregister_driver(tty_drv); + put_tty_driver(tty_drv); + unregister_reboot_notifier(&ifx_modem_reboot_notifier_block); +} + +/** + * ifx_spi_init - module entry point + * + * Initialise the SPI and tty interfaces for the IFX SPI driver + * We need to initialize upper-edge spi driver after the tty + * driver because otherwise the spi probe will race + */ + +static int __init ifx_spi_init(void) +{ + int result; + + tty_drv = alloc_tty_driver(1); + if (!tty_drv) { + pr_err("%s: alloc_tty_driver failed", DRVNAME); + return -ENOMEM; + } + + tty_drv->driver_name = DRVNAME; + tty_drv->name = TTYNAME; + tty_drv->minor_start = IFX_SPI_TTY_ID; + tty_drv->type = TTY_DRIVER_TYPE_SERIAL; + tty_drv->subtype = SERIAL_TYPE_NORMAL; + tty_drv->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; + tty_drv->init_termios = tty_std_termios; + + tty_set_operations(tty_drv, &ifx_spi_serial_ops); + + result = tty_register_driver(tty_drv); + if (result) { + pr_err("%s: tty_register_driver failed(%d)", + DRVNAME, result); + goto err_free_tty; + } + + result = spi_register_driver(&ifx_spi_driver); + if (result) { + pr_err("%s: spi_register_driver failed(%d)", + DRVNAME, result); + goto err_unreg_tty; + } + + result = register_reboot_notifier(&ifx_modem_reboot_notifier_block); + if (result) { + pr_err("%s: register ifx modem reboot notifier failed(%d)", + DRVNAME, result); + goto err_unreg_spi; + } + + return 0; +err_unreg_spi: + spi_unregister_driver(&ifx_spi_driver); +err_unreg_tty: + tty_unregister_driver(tty_drv); +err_free_tty: + put_tty_driver(tty_drv); + + return result; +} + +module_init(ifx_spi_init); +module_exit(ifx_spi_exit); + +MODULE_AUTHOR("Intel"); +MODULE_DESCRIPTION("IFX6x60 spi driver"); +MODULE_LICENSE("GPL"); +MODULE_INFO(Version, "0.1-IFX6x60"); diff --git a/drivers/tty/serial/ifx6x60.h b/drivers/tty/serial/ifx6x60.h new file mode 100644 index 000000000..ecb841d92 --- /dev/null +++ b/drivers/tty/serial/ifx6x60.h @@ -0,0 +1,118 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/**************************************************************************** + * + * Driver for the IFX spi modem. + * + * Copyright (C) 2009, 2010 Intel Corp + * Jim Stanley + * + *****************************************************************************/ +#ifndef _IFX6X60_H +#define _IFX6X60_H + +struct gpio_desc; + +#define DRVNAME "ifx6x60" +#define TTYNAME "ttyIFX" + +#define IFX_SPI_MAX_MINORS 1 +#define IFX_SPI_TRANSFER_SIZE 2048 +#define IFX_SPI_FIFO_SIZE 4096 + +#define IFX_SPI_HEADER_OVERHEAD 4 +#define IFX_RESET_TIMEOUT msecs_to_jiffies(50) + +/* device flags bitfield definitions */ +#define IFX_SPI_STATE_PRESENT 0 +#define IFX_SPI_STATE_IO_IN_PROGRESS 1 +#define IFX_SPI_STATE_IO_READY 2 +#define IFX_SPI_STATE_TIMER_PENDING 3 +#define IFX_SPI_STATE_IO_AVAILABLE 4 + +/* flow control bitfields */ +#define IFX_SPI_DCD 0 +#define IFX_SPI_CTS 1 +#define IFX_SPI_DSR 2 +#define IFX_SPI_RI 3 +#define IFX_SPI_DTR 4 +#define IFX_SPI_RTS 5 +#define IFX_SPI_TX_FC 6 +#define IFX_SPI_RX_FC 7 +#define IFX_SPI_UPDATE 8 + +#define IFX_SPI_PAYLOAD_SIZE (IFX_SPI_TRANSFER_SIZE - \ + IFX_SPI_HEADER_OVERHEAD) + +#define IFX_SPI_IRQ_TYPE DETECT_EDGE_RISING +#define IFX_SPI_GPIO_TARGET 0 +#define IFX_SPI_GPIO0 0x105 + +#define IFX_SPI_STATUS_TIMEOUT (2000*HZ) + +/* values for bits in power status byte */ +#define IFX_SPI_POWER_DATA_PENDING 1 +#define IFX_SPI_POWER_SRDY 2 + +struct ifx_spi_device { + /* Our SPI device */ + struct spi_device *spi_dev; + + /* Port specific data */ + struct kfifo tx_fifo; + spinlock_t fifo_lock; + unsigned long signal_state; + + /* TTY Layer logic */ + struct tty_port tty_port; + struct device *tty_dev; + int minor; + + /* Low level I/O work */ + struct tasklet_struct io_work_tasklet; + unsigned long flags; + dma_addr_t rx_dma; + dma_addr_t tx_dma; + + int modem; /* Modem type */ + int use_dma; /* provide dma-able addrs in SPI msg */ + long max_hz; /* max SPI frequency */ + + spinlock_t write_lock; + int write_pending; + spinlock_t power_lock; + unsigned char power_status; + + unsigned char *rx_buffer; + unsigned char *tx_buffer; + dma_addr_t rx_bus; + dma_addr_t tx_bus; + unsigned char spi_more; + unsigned char spi_slave_cts; + + struct timer_list spi_timer; + + struct spi_message spi_msg; + struct spi_transfer spi_xfer; + + struct { + /* gpio lines */ + struct gpio_desc *srdy; /* slave-ready gpio */ + struct gpio_desc *mrdy; /* master-ready gpio */ + struct gpio_desc *reset; /* modem-reset gpio */ + struct gpio_desc *po; /* modem-on gpio */ + struct gpio_desc *reset_out; /* modem-in-reset gpio */ + struct gpio_desc *pmu_reset; /* PMU reset gpio */ + /* state/stats */ + int unack_srdy_int_nb; + } gpio; + + /* modem reset */ + unsigned long mdm_reset_state; +#define MR_START 0 +#define MR_INPROGRESS 1 +#define MR_COMPLETE 2 + wait_queue_head_t mdm_reset_wait; + void (*swap_buf)(unsigned char *buf, int len, void *end); +}; + +#endif /* _IFX6X60_H */ diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c new file mode 100644 index 000000000..6e49928bb --- /dev/null +++ b/drivers/tty/serial/imx.c @@ -0,0 +1,2677 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver for Motorola/Freescale IMX serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Author: Sascha Hauer + * Copyright (C) 2004 Pengutronix + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "serial_mctrl_gpio.h" + +/* Register definitions */ +#define URXD0 0x0 /* Receiver Register */ +#define URTX0 0x40 /* Transmitter Register */ +#define UCR1 0x80 /* Control Register 1 */ +#define UCR2 0x84 /* Control Register 2 */ +#define UCR3 0x88 /* Control Register 3 */ +#define UCR4 0x8c /* Control Register 4 */ +#define UFCR 0x90 /* FIFO Control Register */ +#define USR1 0x94 /* Status Register 1 */ +#define USR2 0x98 /* Status Register 2 */ +#define UESC 0x9c /* Escape Character Register */ +#define UTIM 0xa0 /* Escape Timer Register */ +#define UBIR 0xa4 /* BRM Incremental Register */ +#define UBMR 0xa8 /* BRM Modulator Register */ +#define UBRC 0xac /* Baud Rate Count Register */ +#define IMX21_ONEMS 0xb0 /* One Millisecond register */ +#define IMX1_UTS 0xd0 /* UART Test Register on i.mx1 */ +#define IMX21_UTS 0xb4 /* UART Test Register on all other i.mx*/ + +/* UART Control Register Bit Fields.*/ +#define URXD_DUMMY_READ (1<<16) +#define URXD_CHARRDY (1<<15) +#define URXD_ERR (1<<14) +#define URXD_OVRRUN (1<<13) +#define URXD_FRMERR (1<<12) +#define URXD_BRK (1<<11) +#define URXD_PRERR (1<<10) +#define URXD_RX_DATA (0xFF<<0) +#define UCR1_ADEN (1<<15) /* Auto detect interrupt */ +#define UCR1_ADBR (1<<14) /* Auto detect baud rate */ +#define UCR1_TRDYEN (1<<13) /* Transmitter ready interrupt enable */ +#define UCR1_IDEN (1<<12) /* Idle condition interrupt */ +#define UCR1_ICD_REG(x) (((x) & 3) << 10) /* idle condition detect */ +#define UCR1_RRDYEN (1<<9) /* Recv ready interrupt enable */ +#define UCR1_RXDMAEN (1<<8) /* Recv ready DMA enable */ +#define UCR1_IREN (1<<7) /* Infrared interface enable */ +#define UCR1_TXMPTYEN (1<<6) /* Transimitter empty interrupt enable */ +#define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */ +#define UCR1_SNDBRK (1<<4) /* Send break */ +#define UCR1_TXDMAEN (1<<3) /* Transmitter ready DMA enable */ +#define IMX1_UCR1_UARTCLKEN (1<<2) /* UART clock enabled, i.mx1 only */ +#define UCR1_ATDMAEN (1<<2) /* Aging DMA Timer Enable */ +#define UCR1_DOZE (1<<1) /* Doze */ +#define UCR1_UARTEN (1<<0) /* UART enabled */ +#define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */ +#define UCR2_IRTS (1<<14) /* Ignore RTS pin */ +#define UCR2_CTSC (1<<13) /* CTS pin control */ +#define UCR2_CTS (1<<12) /* Clear to send */ +#define UCR2_ESCEN (1<<11) /* Escape enable */ +#define UCR2_PREN (1<<8) /* Parity enable */ +#define UCR2_PROE (1<<7) /* Parity odd/even */ +#define UCR2_STPB (1<<6) /* Stop */ +#define UCR2_WS (1<<5) /* Word size */ +#define UCR2_RTSEN (1<<4) /* Request to send interrupt enable */ +#define UCR2_ATEN (1<<3) /* Aging Timer Enable */ +#define UCR2_TXEN (1<<2) /* Transmitter enabled */ +#define UCR2_RXEN (1<<1) /* Receiver enabled */ +#define UCR2_SRST (1<<0) /* SW reset */ +#define UCR3_DTREN (1<<13) /* DTR interrupt enable */ +#define UCR3_PARERREN (1<<12) /* Parity enable */ +#define UCR3_FRAERREN (1<<11) /* Frame error interrupt enable */ +#define UCR3_DSR (1<<10) /* Data set ready */ +#define UCR3_DCD (1<<9) /* Data carrier detect */ +#define UCR3_RI (1<<8) /* Ring indicator */ +#define UCR3_ADNIMP (1<<7) /* Autobaud Detection Not Improved */ +#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */ +#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */ +#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */ +#define UCR3_DTRDEN (1<<3) /* Data Terminal Ready Delta Enable. */ +#define IMX21_UCR3_RXDMUXSEL (1<<2) /* RXD Muxed Input Select */ +#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */ +#define UCR3_BPEN (1<<0) /* Preset registers enable */ +#define UCR4_CTSTL_SHF 10 /* CTS trigger level shift */ +#define UCR4_CTSTL_MASK 0x3F /* CTS trigger is 6 bits wide */ +#define UCR4_INVR (1<<9) /* Inverted infrared reception */ +#define UCR4_ENIRI (1<<8) /* Serial infrared interrupt enable */ +#define UCR4_WKEN (1<<7) /* Wake interrupt enable */ +#define UCR4_REF16 (1<<6) /* Ref freq 16 MHz */ +#define UCR4_IDDMAEN (1<<6) /* DMA IDLE Condition Detected */ +#define UCR4_IRSC (1<<5) /* IR special case */ +#define UCR4_TCEN (1<<3) /* Transmit complete interrupt enable */ +#define UCR4_BKEN (1<<2) /* Break condition interrupt enable */ +#define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */ +#define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */ +#define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */ +#define UFCR_DCEDTE (1<<6) /* DCE/DTE mode select */ +#define UFCR_RFDIV (7<<7) /* Reference freq divider mask */ +#define UFCR_RFDIV_REG(x) (((x) < 7 ? 6 - (x) : 6) << 7) +#define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */ +#define USR1_PARITYERR (1<<15) /* Parity error interrupt flag */ +#define USR1_RTSS (1<<14) /* RTS pin status */ +#define USR1_TRDY (1<<13) /* Transmitter ready interrupt/dma flag */ +#define USR1_RTSD (1<<12) /* RTS delta */ +#define USR1_ESCF (1<<11) /* Escape seq interrupt flag */ +#define USR1_FRAMERR (1<<10) /* Frame error interrupt flag */ +#define USR1_RRDY (1<<9) /* Receiver ready interrupt/dma flag */ +#define USR1_AGTIM (1<<8) /* Ageing timer interrupt flag */ +#define USR1_DTRD (1<<7) /* DTR Delta */ +#define USR1_RXDS (1<<6) /* Receiver idle interrupt flag */ +#define USR1_AIRINT (1<<5) /* Async IR wake interrupt flag */ +#define USR1_AWAKE (1<<4) /* Aysnc wake interrupt flag */ +#define USR2_ADET (1<<15) /* Auto baud rate detect complete */ +#define USR2_TXFE (1<<14) /* Transmit buffer FIFO empty */ +#define USR2_DTRF (1<<13) /* DTR edge interrupt flag */ +#define USR2_IDLE (1<<12) /* Idle condition */ +#define USR2_RIDELT (1<<10) /* Ring Interrupt Delta */ +#define USR2_RIIN (1<<9) /* Ring Indicator Input */ +#define USR2_IRINT (1<<8) /* Serial infrared interrupt flag */ +#define USR2_WAKE (1<<7) /* Wake */ +#define USR2_DCDIN (1<<5) /* Data Carrier Detect Input */ +#define USR2_RTSF (1<<4) /* RTS edge interrupt flag */ +#define USR2_TXDC (1<<3) /* Transmitter complete */ +#define USR2_BRCD (1<<2) /* Break condition */ +#define USR2_ORE (1<<1) /* Overrun error */ +#define USR2_RDR (1<<0) /* Recv data ready */ +#define UTS_FRCPERR (1<<13) /* Force parity error */ +#define UTS_LOOP (1<<12) /* Loop tx and rx */ +#define UTS_TXEMPTY (1<<6) /* TxFIFO empty */ +#define UTS_RXEMPTY (1<<5) /* RxFIFO empty */ +#define UTS_TXFULL (1<<4) /* TxFIFO full */ +#define UTS_RXFULL (1<<3) /* RxFIFO full */ +#define UTS_SOFTRST (1<<0) /* Software reset */ + +/* We've been assigned a range on the "Low-density serial ports" major */ +#define SERIAL_IMX_MAJOR 207 +#define MINOR_START 16 +#define DEV_NAME "ttymxc" + +/* + * This determines how often we check the modem status signals + * for any change. They generally aren't connected to an IRQ + * so we have to poll them. We also check immediately before + * filling the TX fifo incase CTS has been dropped. + */ +#define MCTRL_TIMEOUT (250*HZ/1000) + +#define DRIVER_NAME "IMX-uart" + +#define UART_NR 8 + +/* i.MX21 type uart runs on all i.mx except i.MX1 and i.MX6q */ +enum imx_uart_type { + IMX1_UART, + IMX21_UART, + IMX53_UART, + IMX6Q_UART, +}; + +/* device type dependent stuff */ +struct imx_uart_data { + unsigned uts_reg; + enum imx_uart_type devtype; +}; + +enum imx_tx_state { + OFF, + WAIT_AFTER_RTS, + SEND, + WAIT_AFTER_SEND, +}; + +struct imx_port { + struct uart_port port; + struct timer_list timer; + unsigned int old_status; + unsigned int have_rtscts:1; + unsigned int have_rtsgpio:1; + unsigned int dte_mode:1; + unsigned int inverted_tx:1; + unsigned int inverted_rx:1; + struct clk *clk_ipg; + struct clk *clk_per; + const struct imx_uart_data *devdata; + + struct mctrl_gpios *gpios; + + /* shadow registers */ + unsigned int ucr1; + unsigned int ucr2; + unsigned int ucr3; + unsigned int ucr4; + unsigned int ufcr; + + /* DMA fields */ + unsigned int dma_is_enabled:1; + unsigned int dma_is_rxing:1; + unsigned int dma_is_txing:1; + struct dma_chan *dma_chan_rx, *dma_chan_tx; + struct scatterlist rx_sgl, tx_sgl[2]; + void *rx_buf; + struct circ_buf rx_ring; + unsigned int rx_periods; + dma_cookie_t rx_cookie; + unsigned int tx_bytes; + unsigned int dma_tx_nents; + unsigned int saved_reg[10]; + bool context_saved; + + enum imx_tx_state tx_state; + struct hrtimer trigger_start_tx; + struct hrtimer trigger_stop_tx; +}; + +struct imx_port_ucrs { + unsigned int ucr1; + unsigned int ucr2; + unsigned int ucr3; +}; + +static struct imx_uart_data imx_uart_devdata[] = { + [IMX1_UART] = { + .uts_reg = IMX1_UTS, + .devtype = IMX1_UART, + }, + [IMX21_UART] = { + .uts_reg = IMX21_UTS, + .devtype = IMX21_UART, + }, + [IMX53_UART] = { + .uts_reg = IMX21_UTS, + .devtype = IMX53_UART, + }, + [IMX6Q_UART] = { + .uts_reg = IMX21_UTS, + .devtype = IMX6Q_UART, + }, +}; + +static const struct platform_device_id imx_uart_devtype[] = { + { + .name = "imx1-uart", + .driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX1_UART], + }, { + .name = "imx21-uart", + .driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX21_UART], + }, { + .name = "imx53-uart", + .driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX53_UART], + }, { + .name = "imx6q-uart", + .driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX6Q_UART], + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(platform, imx_uart_devtype); + +static const struct of_device_id imx_uart_dt_ids[] = { + { .compatible = "fsl,imx6q-uart", .data = &imx_uart_devdata[IMX6Q_UART], }, + { .compatible = "fsl,imx53-uart", .data = &imx_uart_devdata[IMX53_UART], }, + { .compatible = "fsl,imx1-uart", .data = &imx_uart_devdata[IMX1_UART], }, + { .compatible = "fsl,imx21-uart", .data = &imx_uart_devdata[IMX21_UART], }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, imx_uart_dt_ids); + +static void imx_uart_writel(struct imx_port *sport, u32 val, u32 offset) +{ + switch (offset) { + case UCR1: + sport->ucr1 = val; + break; + case UCR2: + sport->ucr2 = val; + break; + case UCR3: + sport->ucr3 = val; + break; + case UCR4: + sport->ucr4 = val; + break; + case UFCR: + sport->ufcr = val; + break; + default: + break; + } + writel(val, sport->port.membase + offset); +} + +static u32 imx_uart_readl(struct imx_port *sport, u32 offset) +{ + switch (offset) { + case UCR1: + return sport->ucr1; + break; + case UCR2: + /* + * UCR2_SRST is the only bit in the cached registers that might + * differ from the value that was last written. As it only + * automatically becomes one after being cleared, reread + * conditionally. + */ + if (!(sport->ucr2 & UCR2_SRST)) + sport->ucr2 = readl(sport->port.membase + offset); + return sport->ucr2; + break; + case UCR3: + return sport->ucr3; + break; + case UCR4: + return sport->ucr4; + break; + case UFCR: + return sport->ufcr; + break; + default: + return readl(sport->port.membase + offset); + } +} + +static inline unsigned imx_uart_uts_reg(struct imx_port *sport) +{ + return sport->devdata->uts_reg; +} + +static inline int imx_uart_is_imx1(struct imx_port *sport) +{ + return sport->devdata->devtype == IMX1_UART; +} + +static inline int imx_uart_is_imx21(struct imx_port *sport) +{ + return sport->devdata->devtype == IMX21_UART; +} + +static inline int imx_uart_is_imx53(struct imx_port *sport) +{ + return sport->devdata->devtype == IMX53_UART; +} + +static inline int imx_uart_is_imx6q(struct imx_port *sport) +{ + return sport->devdata->devtype == IMX6Q_UART; +} +/* + * Save and restore functions for UCR1, UCR2 and UCR3 registers + */ +#if IS_ENABLED(CONFIG_SERIAL_IMX_CONSOLE) +static void imx_uart_ucrs_save(struct imx_port *sport, + struct imx_port_ucrs *ucr) +{ + /* save control registers */ + ucr->ucr1 = imx_uart_readl(sport, UCR1); + ucr->ucr2 = imx_uart_readl(sport, UCR2); + ucr->ucr3 = imx_uart_readl(sport, UCR3); +} + +static void imx_uart_ucrs_restore(struct imx_port *sport, + struct imx_port_ucrs *ucr) +{ + /* restore control registers */ + imx_uart_writel(sport, ucr->ucr1, UCR1); + imx_uart_writel(sport, ucr->ucr2, UCR2); + imx_uart_writel(sport, ucr->ucr3, UCR3); +} +#endif + +/* called with port.lock taken and irqs caller dependent */ +static void imx_uart_rts_active(struct imx_port *sport, u32 *ucr2) +{ + *ucr2 &= ~(UCR2_CTSC | UCR2_CTS); + + mctrl_gpio_set(sport->gpios, sport->port.mctrl | TIOCM_RTS); +} + +/* called with port.lock taken and irqs caller dependent */ +static void imx_uart_rts_inactive(struct imx_port *sport, u32 *ucr2) +{ + *ucr2 &= ~UCR2_CTSC; + *ucr2 |= UCR2_CTS; + + mctrl_gpio_set(sport->gpios, sport->port.mctrl & ~TIOCM_RTS); +} + +static void start_hrtimer_ms(struct hrtimer *hrt, unsigned long msec) +{ + long sec = msec / MSEC_PER_SEC; + long nsec = (msec % MSEC_PER_SEC) * 1000000; + ktime_t t = ktime_set(sec, nsec); + + hrtimer_start(hrt, t, HRTIMER_MODE_REL); +} + +/* called with port.lock taken and irqs off */ +static void imx_uart_start_rx(struct uart_port *port) +{ + struct imx_port *sport = (struct imx_port *)port; + unsigned int ucr1, ucr2; + + ucr1 = imx_uart_readl(sport, UCR1); + ucr2 = imx_uart_readl(sport, UCR2); + + ucr2 |= UCR2_RXEN; + + if (sport->dma_is_enabled) { + ucr1 |= UCR1_RXDMAEN | UCR1_ATDMAEN; + } else { + ucr1 |= UCR1_RRDYEN; + ucr2 |= UCR2_ATEN; + } + + /* Write UCR2 first as it includes RXEN */ + imx_uart_writel(sport, ucr2, UCR2); + imx_uart_writel(sport, ucr1, UCR1); +} + +/* called with port.lock taken and irqs off */ +static void imx_uart_stop_tx(struct uart_port *port) +{ + struct imx_port *sport = (struct imx_port *)port; + u32 ucr1, ucr4, usr2; + + if (sport->tx_state == OFF) + return; + + /* + * We are maybe in the SMP context, so if the DMA TX thread is running + * on other cpu, we have to wait for it to finish. + */ + if (sport->dma_is_txing) + return; + + ucr1 = imx_uart_readl(sport, UCR1); + imx_uart_writel(sport, ucr1 & ~UCR1_TRDYEN, UCR1); + + ucr4 = imx_uart_readl(sport, UCR4); + usr2 = imx_uart_readl(sport, USR2); + if ((!(usr2 & USR2_TXDC)) && (ucr4 & UCR4_TCEN)) { + /* The shifter is still busy, so retry once TC triggers */ + return; + } + + ucr4 &= ~UCR4_TCEN; + imx_uart_writel(sport, ucr4, UCR4); + + /* in rs485 mode disable transmitter */ + if (port->rs485.flags & SER_RS485_ENABLED) { + if (sport->tx_state == SEND) { + sport->tx_state = WAIT_AFTER_SEND; + start_hrtimer_ms(&sport->trigger_stop_tx, + port->rs485.delay_rts_after_send); + return; + } + + if (sport->tx_state == WAIT_AFTER_RTS || + sport->tx_state == WAIT_AFTER_SEND) { + u32 ucr2; + + hrtimer_try_to_cancel(&sport->trigger_start_tx); + + ucr2 = imx_uart_readl(sport, UCR2); + if (port->rs485.flags & SER_RS485_RTS_AFTER_SEND) + imx_uart_rts_active(sport, &ucr2); + else + imx_uart_rts_inactive(sport, &ucr2); + imx_uart_writel(sport, ucr2, UCR2); + + imx_uart_start_rx(port); + + sport->tx_state = OFF; + } + } else { + sport->tx_state = OFF; + } +} + +/* called with port.lock taken and irqs off */ +static void imx_uart_stop_rx(struct uart_port *port) +{ + struct imx_port *sport = (struct imx_port *)port; + u32 ucr1, ucr2, ucr4; + + ucr1 = imx_uart_readl(sport, UCR1); + ucr2 = imx_uart_readl(sport, UCR2); + ucr4 = imx_uart_readl(sport, UCR4); + + if (sport->dma_is_enabled) { + ucr1 &= ~(UCR1_RXDMAEN | UCR1_ATDMAEN); + } else { + ucr1 &= ~UCR1_RRDYEN; + ucr2 &= ~UCR2_ATEN; + ucr4 &= ~UCR4_OREN; + } + imx_uart_writel(sport, ucr1, UCR1); + imx_uart_writel(sport, ucr4, UCR4); + + ucr2 &= ~UCR2_RXEN; + imx_uart_writel(sport, ucr2, UCR2); +} + +/* called with port.lock taken and irqs off */ +static void imx_uart_enable_ms(struct uart_port *port) +{ + struct imx_port *sport = (struct imx_port *)port; + + mod_timer(&sport->timer, jiffies); + + mctrl_gpio_enable_ms(sport->gpios); +} + +static void imx_uart_dma_tx(struct imx_port *sport); + +/* called with port.lock taken and irqs off */ +static inline void imx_uart_transmit_buffer(struct imx_port *sport) +{ + struct circ_buf *xmit = &sport->port.state->xmit; + + if (sport->port.x_char) { + /* Send next char */ + imx_uart_writel(sport, sport->port.x_char, URTX0); + sport->port.icount.tx++; + sport->port.x_char = 0; + return; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) { + imx_uart_stop_tx(&sport->port); + return; + } + + if (sport->dma_is_enabled) { + u32 ucr1; + /* + * We've just sent a X-char Ensure the TX DMA is enabled + * and the TX IRQ is disabled. + **/ + ucr1 = imx_uart_readl(sport, UCR1); + ucr1 &= ~UCR1_TRDYEN; + if (sport->dma_is_txing) { + ucr1 |= UCR1_TXDMAEN; + imx_uart_writel(sport, ucr1, UCR1); + } else { + imx_uart_writel(sport, ucr1, UCR1); + imx_uart_dma_tx(sport); + } + + return; + } + + while (!uart_circ_empty(xmit) && + !(imx_uart_readl(sport, imx_uart_uts_reg(sport)) & UTS_TXFULL)) { + /* send xmit->buf[xmit->tail] + * out the port here */ + imx_uart_writel(sport, xmit->buf[xmit->tail], URTX0); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + sport->port.icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&sport->port); + + if (uart_circ_empty(xmit)) + imx_uart_stop_tx(&sport->port); +} + +static void imx_uart_dma_tx_callback(void *data) +{ + struct imx_port *sport = data; + struct scatterlist *sgl = &sport->tx_sgl[0]; + struct circ_buf *xmit = &sport->port.state->xmit; + unsigned long flags; + u32 ucr1; + + spin_lock_irqsave(&sport->port.lock, flags); + + dma_unmap_sg(sport->port.dev, sgl, sport->dma_tx_nents, DMA_TO_DEVICE); + + ucr1 = imx_uart_readl(sport, UCR1); + ucr1 &= ~UCR1_TXDMAEN; + imx_uart_writel(sport, ucr1, UCR1); + + /* update the stat */ + xmit->tail = (xmit->tail + sport->tx_bytes) & (UART_XMIT_SIZE - 1); + sport->port.icount.tx += sport->tx_bytes; + + dev_dbg(sport->port.dev, "we finish the TX DMA.\n"); + + sport->dma_is_txing = 0; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&sport->port); + + if (!uart_circ_empty(xmit) && !uart_tx_stopped(&sport->port)) + imx_uart_dma_tx(sport); + else if (sport->port.rs485.flags & SER_RS485_ENABLED) { + u32 ucr4 = imx_uart_readl(sport, UCR4); + ucr4 |= UCR4_TCEN; + imx_uart_writel(sport, ucr4, UCR4); + } + + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +/* called with port.lock taken and irqs off */ +static void imx_uart_dma_tx(struct imx_port *sport) +{ + struct circ_buf *xmit = &sport->port.state->xmit; + struct scatterlist *sgl = sport->tx_sgl; + struct dma_async_tx_descriptor *desc; + struct dma_chan *chan = sport->dma_chan_tx; + struct device *dev = sport->port.dev; + u32 ucr1, ucr4; + int ret; + + if (sport->dma_is_txing) + return; + + ucr4 = imx_uart_readl(sport, UCR4); + ucr4 &= ~UCR4_TCEN; + imx_uart_writel(sport, ucr4, UCR4); + + sport->tx_bytes = uart_circ_chars_pending(xmit); + + if (xmit->tail < xmit->head || xmit->head == 0) { + sport->dma_tx_nents = 1; + sg_init_one(sgl, xmit->buf + xmit->tail, sport->tx_bytes); + } else { + sport->dma_tx_nents = 2; + sg_init_table(sgl, 2); + sg_set_buf(sgl, xmit->buf + xmit->tail, + UART_XMIT_SIZE - xmit->tail); + sg_set_buf(sgl + 1, xmit->buf, xmit->head); + } + + ret = dma_map_sg(dev, sgl, sport->dma_tx_nents, DMA_TO_DEVICE); + if (ret == 0) { + dev_err(dev, "DMA mapping error for TX.\n"); + return; + } + desc = dmaengine_prep_slave_sg(chan, sgl, ret, + DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT); + if (!desc) { + dma_unmap_sg(dev, sgl, sport->dma_tx_nents, + DMA_TO_DEVICE); + dev_err(dev, "We cannot prepare for the TX slave dma!\n"); + return; + } + desc->callback = imx_uart_dma_tx_callback; + desc->callback_param = sport; + + dev_dbg(dev, "TX: prepare to send %lu bytes by DMA.\n", + uart_circ_chars_pending(xmit)); + + ucr1 = imx_uart_readl(sport, UCR1); + ucr1 |= UCR1_TXDMAEN; + imx_uart_writel(sport, ucr1, UCR1); + + /* fire it */ + sport->dma_is_txing = 1; + dmaengine_submit(desc); + dma_async_issue_pending(chan); + return; +} + +/* called with port.lock taken and irqs off */ +static void imx_uart_start_tx(struct uart_port *port) +{ + struct imx_port *sport = (struct imx_port *)port; + u32 ucr1; + + if (!sport->port.x_char && uart_circ_empty(&port->state->xmit)) + return; + + /* + * We cannot simply do nothing here if sport->tx_state == SEND already + * because UCR1_TXMPTYEN might already have been cleared in + * imx_uart_stop_tx(), but tx_state is still SEND. + */ + + if (port->rs485.flags & SER_RS485_ENABLED) { + if (sport->tx_state == OFF) { + u32 ucr2 = imx_uart_readl(sport, UCR2); + if (port->rs485.flags & SER_RS485_RTS_ON_SEND) + imx_uart_rts_active(sport, &ucr2); + else + imx_uart_rts_inactive(sport, &ucr2); + imx_uart_writel(sport, ucr2, UCR2); + + if (!(port->rs485.flags & SER_RS485_RX_DURING_TX)) + imx_uart_stop_rx(port); + + sport->tx_state = WAIT_AFTER_RTS; + start_hrtimer_ms(&sport->trigger_start_tx, + port->rs485.delay_rts_before_send); + return; + } + + if (sport->tx_state == WAIT_AFTER_SEND + || sport->tx_state == WAIT_AFTER_RTS) { + + hrtimer_try_to_cancel(&sport->trigger_stop_tx); + + /* + * Enable transmitter and shifter empty irq only if DMA + * is off. In the DMA case this is done in the + * tx-callback. + */ + if (!sport->dma_is_enabled) { + u32 ucr4 = imx_uart_readl(sport, UCR4); + ucr4 |= UCR4_TCEN; + imx_uart_writel(sport, ucr4, UCR4); + } + + sport->tx_state = SEND; + } + } else { + sport->tx_state = SEND; + } + + if (!sport->dma_is_enabled) { + ucr1 = imx_uart_readl(sport, UCR1); + imx_uart_writel(sport, ucr1 | UCR1_TRDYEN, UCR1); + } + + if (sport->dma_is_enabled) { + if (sport->port.x_char) { + /* We have X-char to send, so enable TX IRQ and + * disable TX DMA to let TX interrupt to send X-char */ + ucr1 = imx_uart_readl(sport, UCR1); + ucr1 &= ~UCR1_TXDMAEN; + ucr1 |= UCR1_TRDYEN; + imx_uart_writel(sport, ucr1, UCR1); + return; + } + + if (!uart_circ_empty(&port->state->xmit) && + !uart_tx_stopped(port)) + imx_uart_dma_tx(sport); + return; + } +} + +static irqreturn_t __imx_uart_rtsint(int irq, void *dev_id) +{ + struct imx_port *sport = dev_id; + u32 usr1; + + imx_uart_writel(sport, USR1_RTSD, USR1); + usr1 = imx_uart_readl(sport, USR1) & USR1_RTSS; + uart_handle_cts_change(&sport->port, !!usr1); + wake_up_interruptible(&sport->port.state->port.delta_msr_wait); + + return IRQ_HANDLED; +} + +static irqreturn_t imx_uart_rtsint(int irq, void *dev_id) +{ + struct imx_port *sport = dev_id; + irqreturn_t ret; + + spin_lock(&sport->port.lock); + + ret = __imx_uart_rtsint(irq, dev_id); + + spin_unlock(&sport->port.lock); + + return ret; +} + +static irqreturn_t imx_uart_txint(int irq, void *dev_id) +{ + struct imx_port *sport = dev_id; + + spin_lock(&sport->port.lock); + imx_uart_transmit_buffer(sport); + spin_unlock(&sport->port.lock); + return IRQ_HANDLED; +} + +static irqreturn_t __imx_uart_rxint(int irq, void *dev_id) +{ + struct imx_port *sport = dev_id; + unsigned int rx, flg, ignored = 0; + struct tty_port *port = &sport->port.state->port; + + while (imx_uart_readl(sport, USR2) & USR2_RDR) { + u32 usr2; + + flg = TTY_NORMAL; + sport->port.icount.rx++; + + rx = imx_uart_readl(sport, URXD0); + + usr2 = imx_uart_readl(sport, USR2); + if (usr2 & USR2_BRCD) { + imx_uart_writel(sport, USR2_BRCD, USR2); + if (uart_handle_break(&sport->port)) + continue; + } + + if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx)) + continue; + + if (unlikely(rx & URXD_ERR)) { + if (rx & URXD_BRK) + sport->port.icount.brk++; + else if (rx & URXD_PRERR) + sport->port.icount.parity++; + else if (rx & URXD_FRMERR) + sport->port.icount.frame++; + if (rx & URXD_OVRRUN) + sport->port.icount.overrun++; + + if (rx & sport->port.ignore_status_mask) { + if (++ignored > 100) + goto out; + continue; + } + + rx &= (sport->port.read_status_mask | 0xFF); + + if (rx & URXD_BRK) + flg = TTY_BREAK; + else if (rx & URXD_PRERR) + flg = TTY_PARITY; + else if (rx & URXD_FRMERR) + flg = TTY_FRAME; + if (rx & URXD_OVRRUN) + flg = TTY_OVERRUN; + + sport->port.sysrq = 0; + } + + if (sport->port.ignore_status_mask & URXD_DUMMY_READ) + goto out; + + if (tty_insert_flip_char(port, rx, flg) == 0) + sport->port.icount.buf_overrun++; + } + +out: + tty_flip_buffer_push(port); + + return IRQ_HANDLED; +} + +static irqreturn_t imx_uart_rxint(int irq, void *dev_id) +{ + struct imx_port *sport = dev_id; + irqreturn_t ret; + + spin_lock(&sport->port.lock); + + ret = __imx_uart_rxint(irq, dev_id); + + spin_unlock(&sport->port.lock); + + return ret; +} + +static void imx_uart_clear_rx_errors(struct imx_port *sport); + +/* + * We have a modem side uart, so the meanings of RTS and CTS are inverted. + */ +static unsigned int imx_uart_get_hwmctrl(struct imx_port *sport) +{ + unsigned int tmp = TIOCM_DSR; + unsigned usr1 = imx_uart_readl(sport, USR1); + unsigned usr2 = imx_uart_readl(sport, USR2); + + if (usr1 & USR1_RTSS) + tmp |= TIOCM_CTS; + + /* in DCE mode DCDIN is always 0 */ + if (!(usr2 & USR2_DCDIN)) + tmp |= TIOCM_CAR; + + if (sport->dte_mode) + if (!(imx_uart_readl(sport, USR2) & USR2_RIIN)) + tmp |= TIOCM_RI; + + return tmp; +} + +/* + * Handle any change of modem status signal since we were last called. + */ +static void imx_uart_mctrl_check(struct imx_port *sport) +{ + unsigned int status, changed; + + status = imx_uart_get_hwmctrl(sport); + changed = status ^ sport->old_status; + + if (changed == 0) + return; + + sport->old_status = status; + + if (changed & TIOCM_RI && status & TIOCM_RI) + sport->port.icount.rng++; + if (changed & TIOCM_DSR) + sport->port.icount.dsr++; + if (changed & TIOCM_CAR) + uart_handle_dcd_change(&sport->port, status & TIOCM_CAR); + if (changed & TIOCM_CTS) + uart_handle_cts_change(&sport->port, status & TIOCM_CTS); + + wake_up_interruptible(&sport->port.state->port.delta_msr_wait); +} + +static irqreturn_t imx_uart_int(int irq, void *dev_id) +{ + struct imx_port *sport = dev_id; + unsigned int usr1, usr2, ucr1, ucr2, ucr3, ucr4; + irqreturn_t ret = IRQ_NONE; + unsigned long flags = 0; + + /* + * IRQs might not be disabled upon entering this interrupt handler, + * e.g. when interrupt handlers are forced to be threaded. To support + * this scenario as well, disable IRQs when acquiring the spinlock. + */ + spin_lock_irqsave(&sport->port.lock, flags); + + usr1 = imx_uart_readl(sport, USR1); + usr2 = imx_uart_readl(sport, USR2); + ucr1 = imx_uart_readl(sport, UCR1); + ucr2 = imx_uart_readl(sport, UCR2); + ucr3 = imx_uart_readl(sport, UCR3); + ucr4 = imx_uart_readl(sport, UCR4); + + /* + * Even if a condition is true that can trigger an irq only handle it if + * the respective irq source is enabled. This prevents some undesired + * actions, for example if a character that sits in the RX FIFO and that + * should be fetched via DMA is tried to be fetched using PIO. Or the + * receiver is currently off and so reading from URXD0 results in an + * exception. So just mask the (raw) status bits for disabled irqs. + */ + if ((ucr1 & UCR1_RRDYEN) == 0) + usr1 &= ~USR1_RRDY; + if ((ucr2 & UCR2_ATEN) == 0) + usr1 &= ~USR1_AGTIM; + if ((ucr1 & UCR1_TRDYEN) == 0) + usr1 &= ~USR1_TRDY; + if ((ucr4 & UCR4_TCEN) == 0) + usr2 &= ~USR2_TXDC; + if ((ucr3 & UCR3_DTRDEN) == 0) + usr1 &= ~USR1_DTRD; + if ((ucr1 & UCR1_RTSDEN) == 0) + usr1 &= ~USR1_RTSD; + if ((ucr3 & UCR3_AWAKEN) == 0) + usr1 &= ~USR1_AWAKE; + if ((ucr4 & UCR4_OREN) == 0) + usr2 &= ~USR2_ORE; + + if (usr1 & (USR1_RRDY | USR1_AGTIM)) { + imx_uart_writel(sport, USR1_AGTIM, USR1); + + __imx_uart_rxint(irq, dev_id); + ret = IRQ_HANDLED; + } + + if ((usr1 & USR1_TRDY) || (usr2 & USR2_TXDC)) { + imx_uart_transmit_buffer(sport); + ret = IRQ_HANDLED; + } + + if (usr1 & USR1_DTRD) { + imx_uart_writel(sport, USR1_DTRD, USR1); + + imx_uart_mctrl_check(sport); + + ret = IRQ_HANDLED; + } + + if (usr1 & USR1_RTSD) { + __imx_uart_rtsint(irq, dev_id); + ret = IRQ_HANDLED; + } + + if (usr1 & USR1_AWAKE) { + imx_uart_writel(sport, USR1_AWAKE, USR1); + ret = IRQ_HANDLED; + } + + if (usr2 & USR2_ORE) { + sport->port.icount.overrun++; + imx_uart_writel(sport, USR2_ORE, USR2); + ret = IRQ_HANDLED; + } + + spin_unlock_irqrestore(&sport->port.lock, flags); + + return ret; +} + +/* + * Return TIOCSER_TEMT when transmitter is not busy. + */ +static unsigned int imx_uart_tx_empty(struct uart_port *port) +{ + struct imx_port *sport = (struct imx_port *)port; + unsigned int ret; + + ret = (imx_uart_readl(sport, USR2) & USR2_TXDC) ? TIOCSER_TEMT : 0; + + /* If the TX DMA is working, return 0. */ + if (sport->dma_is_txing) + ret = 0; + + return ret; +} + +/* called with port.lock taken and irqs off */ +static unsigned int imx_uart_get_mctrl(struct uart_port *port) +{ + struct imx_port *sport = (struct imx_port *)port; + unsigned int ret = imx_uart_get_hwmctrl(sport); + + mctrl_gpio_get(sport->gpios, &ret); + + return ret; +} + +/* called with port.lock taken and irqs off */ +static void imx_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct imx_port *sport = (struct imx_port *)port; + u32 ucr3, uts; + + if (!(port->rs485.flags & SER_RS485_ENABLED)) { + u32 ucr2; + + /* + * Turn off autoRTS if RTS is lowered and restore autoRTS + * setting if RTS is raised. + */ + ucr2 = imx_uart_readl(sport, UCR2); + ucr2 &= ~(UCR2_CTS | UCR2_CTSC); + if (mctrl & TIOCM_RTS) { + ucr2 |= UCR2_CTS; + /* + * UCR2_IRTS is unset if and only if the port is + * configured for CRTSCTS, so we use inverted UCR2_IRTS + * to get the state to restore to. + */ + if (!(ucr2 & UCR2_IRTS)) + ucr2 |= UCR2_CTSC; + } + imx_uart_writel(sport, ucr2, UCR2); + } + + ucr3 = imx_uart_readl(sport, UCR3) & ~UCR3_DSR; + if (!(mctrl & TIOCM_DTR)) + ucr3 |= UCR3_DSR; + imx_uart_writel(sport, ucr3, UCR3); + + uts = imx_uart_readl(sport, imx_uart_uts_reg(sport)) & ~UTS_LOOP; + if (mctrl & TIOCM_LOOP) + uts |= UTS_LOOP; + imx_uart_writel(sport, uts, imx_uart_uts_reg(sport)); + + mctrl_gpio_set(sport->gpios, mctrl); +} + +/* + * Interrupts always disabled. + */ +static void imx_uart_break_ctl(struct uart_port *port, int break_state) +{ + struct imx_port *sport = (struct imx_port *)port; + unsigned long flags; + u32 ucr1; + + spin_lock_irqsave(&sport->port.lock, flags); + + ucr1 = imx_uart_readl(sport, UCR1) & ~UCR1_SNDBRK; + + if (break_state != 0) + ucr1 |= UCR1_SNDBRK; + + imx_uart_writel(sport, ucr1, UCR1); + + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +/* + * This is our per-port timeout handler, for checking the + * modem status signals. + */ +static void imx_uart_timeout(struct timer_list *t) +{ + struct imx_port *sport = from_timer(sport, t, timer); + unsigned long flags; + + if (sport->port.state) { + spin_lock_irqsave(&sport->port.lock, flags); + imx_uart_mctrl_check(sport); + spin_unlock_irqrestore(&sport->port.lock, flags); + + mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT); + } +} + +/* + * There are two kinds of RX DMA interrupts(such as in the MX6Q): + * [1] the RX DMA buffer is full. + * [2] the aging timer expires + * + * Condition [2] is triggered when a character has been sitting in the FIFO + * for at least 8 byte durations. + */ +static void imx_uart_dma_rx_callback(void *data) +{ + struct imx_port *sport = data; + struct dma_chan *chan = sport->dma_chan_rx; + struct scatterlist *sgl = &sport->rx_sgl; + struct tty_port *port = &sport->port.state->port; + struct dma_tx_state state; + struct circ_buf *rx_ring = &sport->rx_ring; + enum dma_status status; + unsigned int w_bytes = 0; + unsigned int r_bytes; + unsigned int bd_size; + + status = dmaengine_tx_status(chan, sport->rx_cookie, &state); + + if (status == DMA_ERROR) { + imx_uart_clear_rx_errors(sport); + return; + } + + if (!(sport->port.ignore_status_mask & URXD_DUMMY_READ)) { + + /* + * The state-residue variable represents the empty space + * relative to the entire buffer. Taking this in consideration + * the head is always calculated base on the buffer total + * length - DMA transaction residue. The UART script from the + * SDMA firmware will jump to the next buffer descriptor, + * once a DMA transaction if finalized (IMX53 RM - A.4.1.2.4). + * Taking this in consideration the tail is always at the + * beginning of the buffer descriptor that contains the head. + */ + + /* Calculate the head */ + rx_ring->head = sg_dma_len(sgl) - state.residue; + + /* Calculate the tail. */ + bd_size = sg_dma_len(sgl) / sport->rx_periods; + rx_ring->tail = ((rx_ring->head-1) / bd_size) * bd_size; + + if (rx_ring->head <= sg_dma_len(sgl) && + rx_ring->head > rx_ring->tail) { + + /* Move data from tail to head */ + r_bytes = rx_ring->head - rx_ring->tail; + + /* CPU claims ownership of RX DMA buffer */ + dma_sync_sg_for_cpu(sport->port.dev, sgl, 1, + DMA_FROM_DEVICE); + + w_bytes = tty_insert_flip_string(port, + sport->rx_buf + rx_ring->tail, r_bytes); + + /* UART retrieves ownership of RX DMA buffer */ + dma_sync_sg_for_device(sport->port.dev, sgl, 1, + DMA_FROM_DEVICE); + + if (w_bytes != r_bytes) + sport->port.icount.buf_overrun++; + + sport->port.icount.rx += w_bytes; + } else { + WARN_ON(rx_ring->head > sg_dma_len(sgl)); + WARN_ON(rx_ring->head <= rx_ring->tail); + } + } + + if (w_bytes) { + tty_flip_buffer_push(port); + dev_dbg(sport->port.dev, "We get %d bytes.\n", w_bytes); + } +} + +/* RX DMA buffer periods */ +#define RX_DMA_PERIODS 16 +#define RX_BUF_SIZE (RX_DMA_PERIODS * PAGE_SIZE / 4) + +static int imx_uart_start_rx_dma(struct imx_port *sport) +{ + struct scatterlist *sgl = &sport->rx_sgl; + struct dma_chan *chan = sport->dma_chan_rx; + struct device *dev = sport->port.dev; + struct dma_async_tx_descriptor *desc; + int ret; + + sport->rx_ring.head = 0; + sport->rx_ring.tail = 0; + sport->rx_periods = RX_DMA_PERIODS; + + sg_init_one(sgl, sport->rx_buf, RX_BUF_SIZE); + ret = dma_map_sg(dev, sgl, 1, DMA_FROM_DEVICE); + if (ret == 0) { + dev_err(dev, "DMA mapping error for RX.\n"); + return -EINVAL; + } + + desc = dmaengine_prep_dma_cyclic(chan, sg_dma_address(sgl), + sg_dma_len(sgl), sg_dma_len(sgl) / sport->rx_periods, + DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT); + + if (!desc) { + dma_unmap_sg(dev, sgl, 1, DMA_FROM_DEVICE); + dev_err(dev, "We cannot prepare for the RX slave dma!\n"); + return -EINVAL; + } + desc->callback = imx_uart_dma_rx_callback; + desc->callback_param = sport; + + dev_dbg(dev, "RX: prepare for the DMA.\n"); + sport->dma_is_rxing = 1; + sport->rx_cookie = dmaengine_submit(desc); + dma_async_issue_pending(chan); + return 0; +} + +static void imx_uart_clear_rx_errors(struct imx_port *sport) +{ + struct tty_port *port = &sport->port.state->port; + u32 usr1, usr2; + + usr1 = imx_uart_readl(sport, USR1); + usr2 = imx_uart_readl(sport, USR2); + + if (usr2 & USR2_BRCD) { + sport->port.icount.brk++; + imx_uart_writel(sport, USR2_BRCD, USR2); + uart_handle_break(&sport->port); + if (tty_insert_flip_char(port, 0, TTY_BREAK) == 0) + sport->port.icount.buf_overrun++; + tty_flip_buffer_push(port); + } else { + if (usr1 & USR1_FRAMERR) { + sport->port.icount.frame++; + imx_uart_writel(sport, USR1_FRAMERR, USR1); + } else if (usr1 & USR1_PARITYERR) { + sport->port.icount.parity++; + imx_uart_writel(sport, USR1_PARITYERR, USR1); + } + } + + if (usr2 & USR2_ORE) { + sport->port.icount.overrun++; + imx_uart_writel(sport, USR2_ORE, USR2); + } + +} + +#define TXTL_DEFAULT 2 /* reset default */ +#define RXTL_DEFAULT 1 /* reset default */ +#define TXTL_DMA 8 /* DMA burst setting */ +#define RXTL_DMA 9 /* DMA burst setting */ + +static void imx_uart_setup_ufcr(struct imx_port *sport, + unsigned char txwl, unsigned char rxwl) +{ + unsigned int val; + + /* set receiver / transmitter trigger level */ + val = imx_uart_readl(sport, UFCR) & (UFCR_RFDIV | UFCR_DCEDTE); + val |= txwl << UFCR_TXTL_SHF | rxwl; + imx_uart_writel(sport, val, UFCR); +} + +static void imx_uart_dma_exit(struct imx_port *sport) +{ + if (sport->dma_chan_rx) { + dmaengine_terminate_sync(sport->dma_chan_rx); + dma_release_channel(sport->dma_chan_rx); + sport->dma_chan_rx = NULL; + sport->rx_cookie = -EINVAL; + kfree(sport->rx_buf); + sport->rx_buf = NULL; + } + + if (sport->dma_chan_tx) { + dmaengine_terminate_sync(sport->dma_chan_tx); + dma_release_channel(sport->dma_chan_tx); + sport->dma_chan_tx = NULL; + } +} + +static int imx_uart_dma_init(struct imx_port *sport) +{ + struct dma_slave_config slave_config = {}; + struct device *dev = sport->port.dev; + int ret; + + /* Prepare for RX : */ + sport->dma_chan_rx = dma_request_slave_channel(dev, "rx"); + if (!sport->dma_chan_rx) { + dev_dbg(dev, "cannot get the DMA channel.\n"); + ret = -EINVAL; + goto err; + } + + slave_config.direction = DMA_DEV_TO_MEM; + slave_config.src_addr = sport->port.mapbase + URXD0; + slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + /* one byte less than the watermark level to enable the aging timer */ + slave_config.src_maxburst = RXTL_DMA - 1; + ret = dmaengine_slave_config(sport->dma_chan_rx, &slave_config); + if (ret) { + dev_err(dev, "error in RX dma configuration.\n"); + goto err; + } + + sport->rx_buf = kzalloc(RX_BUF_SIZE, GFP_KERNEL); + if (!sport->rx_buf) { + ret = -ENOMEM; + goto err; + } + sport->rx_ring.buf = sport->rx_buf; + + /* Prepare for TX : */ + sport->dma_chan_tx = dma_request_slave_channel(dev, "tx"); + if (!sport->dma_chan_tx) { + dev_err(dev, "cannot get the TX DMA channel!\n"); + ret = -EINVAL; + goto err; + } + + slave_config.direction = DMA_MEM_TO_DEV; + slave_config.dst_addr = sport->port.mapbase + URTX0; + slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + slave_config.dst_maxburst = TXTL_DMA; + ret = dmaengine_slave_config(sport->dma_chan_tx, &slave_config); + if (ret) { + dev_err(dev, "error in TX dma configuration."); + goto err; + } + + return 0; +err: + imx_uart_dma_exit(sport); + return ret; +} + +static void imx_uart_enable_dma(struct imx_port *sport) +{ + u32 ucr1; + + imx_uart_setup_ufcr(sport, TXTL_DMA, RXTL_DMA); + + /* set UCR1 */ + ucr1 = imx_uart_readl(sport, UCR1); + ucr1 |= UCR1_RXDMAEN | UCR1_TXDMAEN | UCR1_ATDMAEN; + imx_uart_writel(sport, ucr1, UCR1); + + sport->dma_is_enabled = 1; +} + +static void imx_uart_disable_dma(struct imx_port *sport) +{ + u32 ucr1; + + /* clear UCR1 */ + ucr1 = imx_uart_readl(sport, UCR1); + ucr1 &= ~(UCR1_RXDMAEN | UCR1_TXDMAEN | UCR1_ATDMAEN); + imx_uart_writel(sport, ucr1, UCR1); + + imx_uart_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT); + + sport->dma_is_enabled = 0; +} + +/* half the RX buffer size */ +#define CTSTL 16 + +static int imx_uart_startup(struct uart_port *port) +{ + struct imx_port *sport = (struct imx_port *)port; + int retval, i; + unsigned long flags; + int dma_is_inited = 0; + u32 ucr1, ucr2, ucr3, ucr4; + + retval = clk_prepare_enable(sport->clk_per); + if (retval) + return retval; + retval = clk_prepare_enable(sport->clk_ipg); + if (retval) { + clk_disable_unprepare(sport->clk_per); + return retval; + } + + imx_uart_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT); + + /* disable the DREN bit (Data Ready interrupt enable) before + * requesting IRQs + */ + ucr4 = imx_uart_readl(sport, UCR4); + + /* set the trigger level for CTS */ + ucr4 &= ~(UCR4_CTSTL_MASK << UCR4_CTSTL_SHF); + ucr4 |= CTSTL << UCR4_CTSTL_SHF; + + imx_uart_writel(sport, ucr4 & ~UCR4_DREN, UCR4); + + /* Can we enable the DMA support? */ + if (!uart_console(port) && imx_uart_dma_init(sport) == 0) + dma_is_inited = 1; + + spin_lock_irqsave(&sport->port.lock, flags); + /* Reset fifo's and state machines */ + i = 100; + + ucr2 = imx_uart_readl(sport, UCR2); + ucr2 &= ~UCR2_SRST; + imx_uart_writel(sport, ucr2, UCR2); + + while (!(imx_uart_readl(sport, UCR2) & UCR2_SRST) && (--i > 0)) + udelay(1); + + /* + * Finally, clear and enable interrupts + */ + imx_uart_writel(sport, USR1_RTSD | USR1_DTRD, USR1); + imx_uart_writel(sport, USR2_ORE, USR2); + + ucr1 = imx_uart_readl(sport, UCR1) & ~UCR1_RRDYEN; + ucr1 |= UCR1_UARTEN; + if (sport->have_rtscts) + ucr1 |= UCR1_RTSDEN; + + imx_uart_writel(sport, ucr1, UCR1); + + ucr4 = imx_uart_readl(sport, UCR4) & ~(UCR4_OREN | UCR4_INVR); + if (!dma_is_inited) + ucr4 |= UCR4_OREN; + if (sport->inverted_rx) + ucr4 |= UCR4_INVR; + imx_uart_writel(sport, ucr4, UCR4); + + ucr3 = imx_uart_readl(sport, UCR3) & ~UCR3_INVT; + /* + * configure tx polarity before enabling tx + */ + if (sport->inverted_tx) + ucr3 |= UCR3_INVT; + + if (!imx_uart_is_imx1(sport)) { + ucr3 |= UCR3_DTRDEN | UCR3_RI | UCR3_DCD; + + if (sport->dte_mode) + /* disable broken interrupts */ + ucr3 &= ~(UCR3_RI | UCR3_DCD); + } + imx_uart_writel(sport, ucr3, UCR3); + + ucr2 = imx_uart_readl(sport, UCR2) & ~UCR2_ATEN; + ucr2 |= (UCR2_RXEN | UCR2_TXEN); + if (!sport->have_rtscts) + ucr2 |= UCR2_IRTS; + /* + * make sure the edge sensitive RTS-irq is disabled, + * we're using RTSD instead. + */ + if (!imx_uart_is_imx1(sport)) + ucr2 &= ~UCR2_RTSEN; + imx_uart_writel(sport, ucr2, UCR2); + + /* + * Enable modem status interrupts + */ + imx_uart_enable_ms(&sport->port); + + if (dma_is_inited) { + imx_uart_enable_dma(sport); + imx_uart_start_rx_dma(sport); + } else { + ucr1 = imx_uart_readl(sport, UCR1); + ucr1 |= UCR1_RRDYEN; + imx_uart_writel(sport, ucr1, UCR1); + + ucr2 = imx_uart_readl(sport, UCR2); + ucr2 |= UCR2_ATEN; + imx_uart_writel(sport, ucr2, UCR2); + } + + spin_unlock_irqrestore(&sport->port.lock, flags); + + return 0; +} + +static void imx_uart_shutdown(struct uart_port *port) +{ + struct imx_port *sport = (struct imx_port *)port; + unsigned long flags; + u32 ucr1, ucr2, ucr4; + + if (sport->dma_is_enabled) { + dmaengine_terminate_sync(sport->dma_chan_tx); + if (sport->dma_is_txing) { + dma_unmap_sg(sport->port.dev, &sport->tx_sgl[0], + sport->dma_tx_nents, DMA_TO_DEVICE); + sport->dma_is_txing = 0; + } + dmaengine_terminate_sync(sport->dma_chan_rx); + if (sport->dma_is_rxing) { + dma_unmap_sg(sport->port.dev, &sport->rx_sgl, + 1, DMA_FROM_DEVICE); + sport->dma_is_rxing = 0; + } + + spin_lock_irqsave(&sport->port.lock, flags); + imx_uart_stop_tx(port); + imx_uart_stop_rx(port); + imx_uart_disable_dma(sport); + spin_unlock_irqrestore(&sport->port.lock, flags); + imx_uart_dma_exit(sport); + } + + mctrl_gpio_disable_ms(sport->gpios); + + spin_lock_irqsave(&sport->port.lock, flags); + ucr2 = imx_uart_readl(sport, UCR2); + ucr2 &= ~(UCR2_TXEN | UCR2_ATEN); + imx_uart_writel(sport, ucr2, UCR2); + spin_unlock_irqrestore(&sport->port.lock, flags); + + /* + * Stop our timer. + */ + del_timer_sync(&sport->timer); + + /* + * Disable all interrupts, port and break condition. + */ + + spin_lock_irqsave(&sport->port.lock, flags); + + ucr1 = imx_uart_readl(sport, UCR1); + ucr1 &= ~(UCR1_TRDYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN | UCR1_RXDMAEN | UCR1_ATDMAEN); + imx_uart_writel(sport, ucr1, UCR1); + + ucr4 = imx_uart_readl(sport, UCR4); + ucr4 &= ~UCR4_TCEN; + imx_uart_writel(sport, ucr4, UCR4); + + spin_unlock_irqrestore(&sport->port.lock, flags); + + clk_disable_unprepare(sport->clk_per); + clk_disable_unprepare(sport->clk_ipg); +} + +/* called with port.lock taken and irqs off */ +static void imx_uart_flush_buffer(struct uart_port *port) +{ + struct imx_port *sport = (struct imx_port *)port; + struct scatterlist *sgl = &sport->tx_sgl[0]; + u32 ucr2; + int i = 100, ubir, ubmr, uts; + + if (!sport->dma_chan_tx) + return; + + sport->tx_bytes = 0; + dmaengine_terminate_all(sport->dma_chan_tx); + if (sport->dma_is_txing) { + u32 ucr1; + + dma_unmap_sg(sport->port.dev, sgl, sport->dma_tx_nents, + DMA_TO_DEVICE); + ucr1 = imx_uart_readl(sport, UCR1); + ucr1 &= ~UCR1_TXDMAEN; + imx_uart_writel(sport, ucr1, UCR1); + sport->dma_is_txing = 0; + } + + /* + * According to the Reference Manual description of the UART SRST bit: + * + * "Reset the transmit and receive state machines, + * all FIFOs and register USR1, USR2, UBIR, UBMR, UBRC, URXD, UTXD + * and UTS[6-3]". + * + * We don't need to restore the old values from USR1, USR2, URXD and + * UTXD. UBRC is read only, so only save/restore the other three + * registers. + */ + ubir = imx_uart_readl(sport, UBIR); + ubmr = imx_uart_readl(sport, UBMR); + uts = imx_uart_readl(sport, IMX21_UTS); + + ucr2 = imx_uart_readl(sport, UCR2); + ucr2 &= ~UCR2_SRST; + imx_uart_writel(sport, ucr2, UCR2); + + while (!(imx_uart_readl(sport, UCR2) & UCR2_SRST) && (--i > 0)) + udelay(1); + + /* Restore the registers */ + imx_uart_writel(sport, ubir, UBIR); + imx_uart_writel(sport, ubmr, UBMR); + imx_uart_writel(sport, uts, IMX21_UTS); +} + +static void +imx_uart_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct imx_port *sport = (struct imx_port *)port; + unsigned long flags; + u32 ucr2, old_ucr2, ufcr; + unsigned int baud, quot; + unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; + unsigned long div; + unsigned long num, denom, old_ubir, old_ubmr; + uint64_t tdiv64; + + /* + * We only support CS7 and CS8. + */ + while ((termios->c_cflag & CSIZE) != CS7 && + (termios->c_cflag & CSIZE) != CS8) { + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= old_csize; + old_csize = CS8; + } + + del_timer_sync(&sport->timer); + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16); + quot = uart_get_divisor(port, baud); + + spin_lock_irqsave(&sport->port.lock, flags); + + /* + * Read current UCR2 and save it for future use, then clear all the bits + * except those we will or may need to preserve. + */ + old_ucr2 = imx_uart_readl(sport, UCR2); + ucr2 = old_ucr2 & (UCR2_TXEN | UCR2_RXEN | UCR2_ATEN | UCR2_CTS); + + ucr2 |= UCR2_SRST | UCR2_IRTS; + if ((termios->c_cflag & CSIZE) == CS8) + ucr2 |= UCR2_WS; + + if (!sport->have_rtscts) + termios->c_cflag &= ~CRTSCTS; + + if (port->rs485.flags & SER_RS485_ENABLED) { + /* + * RTS is mandatory for rs485 operation, so keep + * it under manual control and keep transmitter + * disabled. + */ + if (port->rs485.flags & SER_RS485_RTS_AFTER_SEND) + imx_uart_rts_active(sport, &ucr2); + else + imx_uart_rts_inactive(sport, &ucr2); + + } else if (termios->c_cflag & CRTSCTS) { + /* + * Only let receiver control RTS output if we were not requested + * to have RTS inactive (which then should take precedence). + */ + if (ucr2 & UCR2_CTS) + ucr2 |= UCR2_CTSC; + } + + if (termios->c_cflag & CRTSCTS) + ucr2 &= ~UCR2_IRTS; + if (termios->c_cflag & CSTOPB) + ucr2 |= UCR2_STPB; + if (termios->c_cflag & PARENB) { + ucr2 |= UCR2_PREN; + if (termios->c_cflag & PARODD) + ucr2 |= UCR2_PROE; + } + + sport->port.read_status_mask = 0; + if (termios->c_iflag & INPCK) + sport->port.read_status_mask |= (URXD_FRMERR | URXD_PRERR); + if (termios->c_iflag & (BRKINT | PARMRK)) + sport->port.read_status_mask |= URXD_BRK; + + /* + * Characters to ignore + */ + sport->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + sport->port.ignore_status_mask |= URXD_PRERR | URXD_FRMERR; + if (termios->c_iflag & IGNBRK) { + sport->port.ignore_status_mask |= URXD_BRK; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + sport->port.ignore_status_mask |= URXD_OVRRUN; + } + + if ((termios->c_cflag & CREAD) == 0) + sport->port.ignore_status_mask |= URXD_DUMMY_READ; + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + /* custom-baudrate handling */ + div = sport->port.uartclk / (baud * 16); + if (baud == 38400 && quot != div) + baud = sport->port.uartclk / (quot * 16); + + div = sport->port.uartclk / (baud * 16); + if (div > 7) + div = 7; + if (!div) + div = 1; + + rational_best_approximation(16 * div * baud, sport->port.uartclk, + 1 << 16, 1 << 16, &num, &denom); + + tdiv64 = sport->port.uartclk; + tdiv64 *= num; + do_div(tdiv64, denom * 16 * div); + tty_termios_encode_baud_rate(termios, + (speed_t)tdiv64, (speed_t)tdiv64); + + num -= 1; + denom -= 1; + + ufcr = imx_uart_readl(sport, UFCR); + ufcr = (ufcr & (~UFCR_RFDIV)) | UFCR_RFDIV_REG(div); + imx_uart_writel(sport, ufcr, UFCR); + + /* + * Two registers below should always be written both and in this + * particular order. One consequence is that we need to check if any of + * them changes and then update both. We do need the check for change + * as even writing the same values seem to "restart" + * transmission/receiving logic in the hardware, that leads to data + * breakage even when rate doesn't in fact change. E.g., user switches + * RTS/CTS handshake and suddenly gets broken bytes. + */ + old_ubir = imx_uart_readl(sport, UBIR); + old_ubmr = imx_uart_readl(sport, UBMR); + if (old_ubir != num || old_ubmr != denom) { + imx_uart_writel(sport, num, UBIR); + imx_uart_writel(sport, denom, UBMR); + } + + if (!imx_uart_is_imx1(sport)) + imx_uart_writel(sport, sport->port.uartclk / div / 1000, + IMX21_ONEMS); + + imx_uart_writel(sport, ucr2, UCR2); + + if (UART_ENABLE_MS(&sport->port, termios->c_cflag)) + imx_uart_enable_ms(&sport->port); + + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +static const char *imx_uart_type(struct uart_port *port) +{ + struct imx_port *sport = (struct imx_port *)port; + + return sport->port.type == PORT_IMX ? "IMX" : NULL; +} + +/* + * Configure/autoconfigure the port. + */ +static void imx_uart_config_port(struct uart_port *port, int flags) +{ + struct imx_port *sport = (struct imx_port *)port; + + if (flags & UART_CONFIG_TYPE) + sport->port.type = PORT_IMX; +} + +/* + * Verify the new serial_struct (for TIOCSSERIAL). + * The only change we allow are to the flags and type, and + * even then only between PORT_IMX and PORT_UNKNOWN + */ +static int +imx_uart_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + struct imx_port *sport = (struct imx_port *)port; + int ret = 0; + + if (ser->type != PORT_UNKNOWN && ser->type != PORT_IMX) + ret = -EINVAL; + if (sport->port.irq != ser->irq) + ret = -EINVAL; + if (ser->io_type != UPIO_MEM) + ret = -EINVAL; + if (sport->port.uartclk / 16 != ser->baud_base) + ret = -EINVAL; + if (sport->port.mapbase != (unsigned long)ser->iomem_base) + ret = -EINVAL; + if (sport->port.iobase != ser->port) + ret = -EINVAL; + if (ser->hub6 != 0) + ret = -EINVAL; + return ret; +} + +#if defined(CONFIG_CONSOLE_POLL) + +static int imx_uart_poll_init(struct uart_port *port) +{ + struct imx_port *sport = (struct imx_port *)port; + unsigned long flags; + u32 ucr1, ucr2; + int retval; + + retval = clk_prepare_enable(sport->clk_ipg); + if (retval) + return retval; + retval = clk_prepare_enable(sport->clk_per); + if (retval) + clk_disable_unprepare(sport->clk_ipg); + + imx_uart_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT); + + spin_lock_irqsave(&sport->port.lock, flags); + + /* + * Be careful about the order of enabling bits here. First enable the + * receiver (UARTEN + RXEN) and only then the corresponding irqs. + * This prevents that a character that already sits in the RX fifo is + * triggering an irq but the try to fetch it from there results in an + * exception because UARTEN or RXEN is still off. + */ + ucr1 = imx_uart_readl(sport, UCR1); + ucr2 = imx_uart_readl(sport, UCR2); + + if (imx_uart_is_imx1(sport)) + ucr1 |= IMX1_UCR1_UARTCLKEN; + + ucr1 |= UCR1_UARTEN; + ucr1 &= ~(UCR1_TRDYEN | UCR1_RTSDEN | UCR1_RRDYEN); + + ucr2 |= UCR2_RXEN; + ucr2 &= ~UCR2_ATEN; + + imx_uart_writel(sport, ucr1, UCR1); + imx_uart_writel(sport, ucr2, UCR2); + + /* now enable irqs */ + imx_uart_writel(sport, ucr1 | UCR1_RRDYEN, UCR1); + imx_uart_writel(sport, ucr2 | UCR2_ATEN, UCR2); + + spin_unlock_irqrestore(&sport->port.lock, flags); + + return 0; +} + +static int imx_uart_poll_get_char(struct uart_port *port) +{ + struct imx_port *sport = (struct imx_port *)port; + if (!(imx_uart_readl(sport, USR2) & USR2_RDR)) + return NO_POLL_CHAR; + + return imx_uart_readl(sport, URXD0) & URXD_RX_DATA; +} + +static void imx_uart_poll_put_char(struct uart_port *port, unsigned char c) +{ + struct imx_port *sport = (struct imx_port *)port; + unsigned int status; + + /* drain */ + do { + status = imx_uart_readl(sport, USR1); + } while (~status & USR1_TRDY); + + /* write */ + imx_uart_writel(sport, c, URTX0); + + /* flush */ + do { + status = imx_uart_readl(sport, USR2); + } while (~status & USR2_TXDC); +} +#endif + +/* called with port.lock taken and irqs off or from .probe without locking */ +static int imx_uart_rs485_config(struct uart_port *port, + struct serial_rs485 *rs485conf) +{ + struct imx_port *sport = (struct imx_port *)port; + u32 ucr2; + + /* RTS is required to control the transmitter */ + if (!sport->have_rtscts && !sport->have_rtsgpio) + rs485conf->flags &= ~SER_RS485_ENABLED; + + if (rs485conf->flags & SER_RS485_ENABLED) { + /* Enable receiver if low-active RTS signal is requested */ + if (sport->have_rtscts && !sport->have_rtsgpio && + !(rs485conf->flags & SER_RS485_RTS_ON_SEND)) + rs485conf->flags |= SER_RS485_RX_DURING_TX; + + /* disable transmitter */ + ucr2 = imx_uart_readl(sport, UCR2); + if (rs485conf->flags & SER_RS485_RTS_AFTER_SEND) + imx_uart_rts_active(sport, &ucr2); + else + imx_uart_rts_inactive(sport, &ucr2); + imx_uart_writel(sport, ucr2, UCR2); + } + + /* Make sure Rx is enabled in case Tx is active with Rx disabled */ + if (!(rs485conf->flags & SER_RS485_ENABLED) || + rs485conf->flags & SER_RS485_RX_DURING_TX) + imx_uart_start_rx(port); + + port->rs485 = *rs485conf; + + return 0; +} + +static const struct uart_ops imx_uart_pops = { + .tx_empty = imx_uart_tx_empty, + .set_mctrl = imx_uart_set_mctrl, + .get_mctrl = imx_uart_get_mctrl, + .stop_tx = imx_uart_stop_tx, + .start_tx = imx_uart_start_tx, + .stop_rx = imx_uart_stop_rx, + .enable_ms = imx_uart_enable_ms, + .break_ctl = imx_uart_break_ctl, + .startup = imx_uart_startup, + .shutdown = imx_uart_shutdown, + .flush_buffer = imx_uart_flush_buffer, + .set_termios = imx_uart_set_termios, + .type = imx_uart_type, + .config_port = imx_uart_config_port, + .verify_port = imx_uart_verify_port, +#if defined(CONFIG_CONSOLE_POLL) + .poll_init = imx_uart_poll_init, + .poll_get_char = imx_uart_poll_get_char, + .poll_put_char = imx_uart_poll_put_char, +#endif +}; + +static struct imx_port *imx_uart_ports[UART_NR]; + +#if IS_ENABLED(CONFIG_SERIAL_IMX_CONSOLE) +static void imx_uart_console_putchar(struct uart_port *port, int ch) +{ + struct imx_port *sport = (struct imx_port *)port; + + while (imx_uart_readl(sport, imx_uart_uts_reg(sport)) & UTS_TXFULL) + barrier(); + + imx_uart_writel(sport, ch, URTX0); +} + +/* + * Interrupts are disabled on entering + */ +static void +imx_uart_console_write(struct console *co, const char *s, unsigned int count) +{ + struct imx_port *sport = imx_uart_ports[co->index]; + struct imx_port_ucrs old_ucr; + unsigned int ucr1; + unsigned long flags = 0; + int locked = 1; + + if (sport->port.sysrq) + locked = 0; + else if (oops_in_progress) + locked = spin_trylock_irqsave(&sport->port.lock, flags); + else + spin_lock_irqsave(&sport->port.lock, flags); + + /* + * First, save UCR1/2/3 and then disable interrupts + */ + imx_uart_ucrs_save(sport, &old_ucr); + ucr1 = old_ucr.ucr1; + + if (imx_uart_is_imx1(sport)) + ucr1 |= IMX1_UCR1_UARTCLKEN; + ucr1 |= UCR1_UARTEN; + ucr1 &= ~(UCR1_TRDYEN | UCR1_RRDYEN | UCR1_RTSDEN); + + imx_uart_writel(sport, ucr1, UCR1); + + imx_uart_writel(sport, old_ucr.ucr2 | UCR2_TXEN, UCR2); + + uart_console_write(&sport->port, s, count, imx_uart_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore UCR1/2/3 + */ + while (!(imx_uart_readl(sport, USR2) & USR2_TXDC)); + + imx_uart_ucrs_restore(sport, &old_ucr); + + if (locked) + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +/* + * If the port was already initialised (eg, by a boot loader), + * try to determine the current setup. + */ +static void +imx_uart_console_get_options(struct imx_port *sport, int *baud, + int *parity, int *bits) +{ + + if (imx_uart_readl(sport, UCR1) & UCR1_UARTEN) { + /* ok, the port was enabled */ + unsigned int ucr2, ubir, ubmr, uartclk; + unsigned int baud_raw; + unsigned int ucfr_rfdiv; + + ucr2 = imx_uart_readl(sport, UCR2); + + *parity = 'n'; + if (ucr2 & UCR2_PREN) { + if (ucr2 & UCR2_PROE) + *parity = 'o'; + else + *parity = 'e'; + } + + if (ucr2 & UCR2_WS) + *bits = 8; + else + *bits = 7; + + ubir = imx_uart_readl(sport, UBIR) & 0xffff; + ubmr = imx_uart_readl(sport, UBMR) & 0xffff; + + ucfr_rfdiv = (imx_uart_readl(sport, UFCR) & UFCR_RFDIV) >> 7; + if (ucfr_rfdiv == 6) + ucfr_rfdiv = 7; + else + ucfr_rfdiv = 6 - ucfr_rfdiv; + + uartclk = clk_get_rate(sport->clk_per); + uartclk /= ucfr_rfdiv; + + { /* + * The next code provides exact computation of + * baud_raw = round(((uartclk/16) * (ubir + 1)) / (ubmr + 1)) + * without need of float support or long long division, + * which would be required to prevent 32bit arithmetic overflow + */ + unsigned int mul = ubir + 1; + unsigned int div = 16 * (ubmr + 1); + unsigned int rem = uartclk % div; + + baud_raw = (uartclk / div) * mul; + baud_raw += (rem * mul + div / 2) / div; + *baud = (baud_raw + 50) / 100 * 100; + } + + if (*baud != baud_raw) + dev_info(sport->port.dev, "Console IMX rounded baud rate from %d to %d\n", + baud_raw, *baud); + } +} + +static int +imx_uart_console_setup(struct console *co, char *options) +{ + struct imx_port *sport; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + int retval; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index == -1 || co->index >= ARRAY_SIZE(imx_uart_ports)) + co->index = 0; + sport = imx_uart_ports[co->index]; + if (sport == NULL) + return -ENODEV; + + /* For setting the registers, we only need to enable the ipg clock. */ + retval = clk_prepare_enable(sport->clk_ipg); + if (retval) + goto error_console; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + imx_uart_console_get_options(sport, &baud, &parity, &bits); + + imx_uart_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT); + + retval = uart_set_options(&sport->port, co, baud, parity, bits, flow); + + if (retval) { + clk_disable_unprepare(sport->clk_ipg); + goto error_console; + } + + retval = clk_prepare_enable(sport->clk_per); + if (retval) + clk_disable_unprepare(sport->clk_ipg); + +error_console: + return retval; +} + +static struct uart_driver imx_uart_uart_driver; +static struct console imx_uart_console = { + .name = DEV_NAME, + .write = imx_uart_console_write, + .device = uart_console_device, + .setup = imx_uart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &imx_uart_uart_driver, +}; + +#define IMX_CONSOLE &imx_uart_console + +#else +#define IMX_CONSOLE NULL +#endif + +static struct uart_driver imx_uart_uart_driver = { + .owner = THIS_MODULE, + .driver_name = DRIVER_NAME, + .dev_name = DEV_NAME, + .major = SERIAL_IMX_MAJOR, + .minor = MINOR_START, + .nr = ARRAY_SIZE(imx_uart_ports), + .cons = IMX_CONSOLE, +}; + +#ifdef CONFIG_OF +/* + * This function returns 1 iff pdev isn't a device instatiated by dt, 0 iff it + * could successfully get all information from dt or a negative errno. + */ +static int imx_uart_probe_dt(struct imx_port *sport, + struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + int ret; + + sport->devdata = of_device_get_match_data(&pdev->dev); + if (!sport->devdata) + /* no device tree device */ + return 1; + + ret = of_alias_get_id(np, "serial"); + if (ret < 0) { + dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret); + return ret; + } + sport->port.line = ret; + + if (of_get_property(np, "uart-has-rtscts", NULL) || + of_get_property(np, "fsl,uart-has-rtscts", NULL) /* deprecated */) + sport->have_rtscts = 1; + + if (of_get_property(np, "fsl,dte-mode", NULL)) + sport->dte_mode = 1; + + if (of_get_property(np, "rts-gpios", NULL)) + sport->have_rtsgpio = 1; + + if (of_get_property(np, "fsl,inverted-tx", NULL)) + sport->inverted_tx = 1; + + if (of_get_property(np, "fsl,inverted-rx", NULL)) + sport->inverted_rx = 1; + + return 0; +} +#else +static inline int imx_uart_probe_dt(struct imx_port *sport, + struct platform_device *pdev) +{ + return 1; +} +#endif + +static void imx_uart_probe_pdata(struct imx_port *sport, + struct platform_device *pdev) +{ + struct imxuart_platform_data *pdata = dev_get_platdata(&pdev->dev); + + sport->port.line = pdev->id; + sport->devdata = (struct imx_uart_data *) pdev->id_entry->driver_data; + + if (!pdata) + return; + + if (pdata->flags & IMXUART_HAVE_RTSCTS) + sport->have_rtscts = 1; +} + +static enum hrtimer_restart imx_trigger_start_tx(struct hrtimer *t) +{ + struct imx_port *sport = container_of(t, struct imx_port, trigger_start_tx); + unsigned long flags; + + spin_lock_irqsave(&sport->port.lock, flags); + if (sport->tx_state == WAIT_AFTER_RTS) + imx_uart_start_tx(&sport->port); + spin_unlock_irqrestore(&sport->port.lock, flags); + + return HRTIMER_NORESTART; +} + +static enum hrtimer_restart imx_trigger_stop_tx(struct hrtimer *t) +{ + struct imx_port *sport = container_of(t, struct imx_port, trigger_stop_tx); + unsigned long flags; + + spin_lock_irqsave(&sport->port.lock, flags); + if (sport->tx_state == WAIT_AFTER_SEND) + imx_uart_stop_tx(&sport->port); + spin_unlock_irqrestore(&sport->port.lock, flags); + + return HRTIMER_NORESTART; +} + +static int imx_uart_probe(struct platform_device *pdev) +{ + struct imx_port *sport; + void __iomem *base; + int ret = 0; + u32 ucr1; + struct resource *res; + int txirq, rxirq, rtsirq; + + sport = devm_kzalloc(&pdev->dev, sizeof(*sport), GFP_KERNEL); + if (!sport) + return -ENOMEM; + + ret = imx_uart_probe_dt(sport, pdev); + if (ret > 0) + imx_uart_probe_pdata(sport, pdev); + else if (ret < 0) + return ret; + + if (sport->port.line >= ARRAY_SIZE(imx_uart_ports)) { + dev_err(&pdev->dev, "serial%d out of range\n", + sport->port.line); + return -EINVAL; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + rxirq = platform_get_irq(pdev, 0); + if (rxirq < 0) + return rxirq; + txirq = platform_get_irq_optional(pdev, 1); + rtsirq = platform_get_irq_optional(pdev, 2); + + sport->port.dev = &pdev->dev; + sport->port.mapbase = res->start; + sport->port.membase = base; + sport->port.type = PORT_IMX, + sport->port.iotype = UPIO_MEM; + sport->port.irq = rxirq; + sport->port.fifosize = 32; + sport->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_IMX_CONSOLE); + sport->port.ops = &imx_uart_pops; + sport->port.rs485_config = imx_uart_rs485_config; + sport->port.flags = UPF_BOOT_AUTOCONF; + timer_setup(&sport->timer, imx_uart_timeout, 0); + + sport->gpios = mctrl_gpio_init(&sport->port, 0); + if (IS_ERR(sport->gpios)) + return PTR_ERR(sport->gpios); + + sport->clk_ipg = devm_clk_get(&pdev->dev, "ipg"); + if (IS_ERR(sport->clk_ipg)) { + ret = PTR_ERR(sport->clk_ipg); + dev_err(&pdev->dev, "failed to get ipg clk: %d\n", ret); + return ret; + } + + sport->clk_per = devm_clk_get(&pdev->dev, "per"); + if (IS_ERR(sport->clk_per)) { + ret = PTR_ERR(sport->clk_per); + dev_err(&pdev->dev, "failed to get per clk: %d\n", ret); + return ret; + } + + sport->port.uartclk = clk_get_rate(sport->clk_per); + + /* For register access, we only need to enable the ipg clock. */ + ret = clk_prepare_enable(sport->clk_ipg); + if (ret) { + dev_err(&pdev->dev, "failed to enable ipg clk: %d\n", ret); + return ret; + } + + /* initialize shadow register values */ + sport->ucr1 = readl(sport->port.membase + UCR1); + sport->ucr2 = readl(sport->port.membase + UCR2); + sport->ucr3 = readl(sport->port.membase + UCR3); + sport->ucr4 = readl(sport->port.membase + UCR4); + sport->ufcr = readl(sport->port.membase + UFCR); + + ret = uart_get_rs485_mode(&sport->port); + if (ret) + goto err_clk; + + if (sport->port.rs485.flags & SER_RS485_ENABLED && + (!sport->have_rtscts && !sport->have_rtsgpio)) + dev_err(&pdev->dev, "no RTS control, disabling rs485\n"); + + /* + * If using the i.MX UART RTS/CTS control then the RTS (CTS_B) + * signal cannot be set low during transmission in case the + * receiver is off (limitation of the i.MX UART IP). + */ + if (sport->port.rs485.flags & SER_RS485_ENABLED && + sport->have_rtscts && !sport->have_rtsgpio && + (!(sport->port.rs485.flags & SER_RS485_RTS_ON_SEND) && + !(sport->port.rs485.flags & SER_RS485_RX_DURING_TX))) + dev_err(&pdev->dev, + "low-active RTS not possible when receiver is off, enabling receiver\n"); + + /* Disable interrupts before requesting them */ + ucr1 = imx_uart_readl(sport, UCR1); + ucr1 &= ~(UCR1_ADEN | UCR1_TRDYEN | UCR1_IDEN | UCR1_RRDYEN | UCR1_RTSDEN); + imx_uart_writel(sport, ucr1, UCR1); + + if (!imx_uart_is_imx1(sport) && sport->dte_mode) { + /* + * The DCEDTE bit changes the direction of DSR, DCD, DTR and RI + * and influences if UCR3_RI and UCR3_DCD changes the level of RI + * and DCD (when they are outputs) or enables the respective + * irqs. So set this bit early, i.e. before requesting irqs. + */ + u32 ufcr = imx_uart_readl(sport, UFCR); + if (!(ufcr & UFCR_DCEDTE)) + imx_uart_writel(sport, ufcr | UFCR_DCEDTE, UFCR); + + /* + * Disable UCR3_RI and UCR3_DCD irqs. They are also not + * enabled later because they cannot be cleared + * (confirmed on i.MX25) which makes them unusable. + */ + imx_uart_writel(sport, + IMX21_UCR3_RXDMUXSEL | UCR3_ADNIMP | UCR3_DSR, + UCR3); + + } else { + u32 ucr3 = UCR3_DSR; + u32 ufcr = imx_uart_readl(sport, UFCR); + if (ufcr & UFCR_DCEDTE) + imx_uart_writel(sport, ufcr & ~UFCR_DCEDTE, UFCR); + + if (!imx_uart_is_imx1(sport)) + ucr3 |= IMX21_UCR3_RXDMUXSEL | UCR3_ADNIMP; + imx_uart_writel(sport, ucr3, UCR3); + } + + hrtimer_init(&sport->trigger_start_tx, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + hrtimer_init(&sport->trigger_stop_tx, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + sport->trigger_start_tx.function = imx_trigger_start_tx; + sport->trigger_stop_tx.function = imx_trigger_stop_tx; + + /* + * Allocate the IRQ(s) i.MX1 has three interrupts whereas later + * chips only have one interrupt. + */ + if (txirq > 0) { + ret = devm_request_irq(&pdev->dev, rxirq, imx_uart_rxint, 0, + dev_name(&pdev->dev), sport); + if (ret) { + dev_err(&pdev->dev, "failed to request rx irq: %d\n", + ret); + goto err_clk; + } + + ret = devm_request_irq(&pdev->dev, txirq, imx_uart_txint, 0, + dev_name(&pdev->dev), sport); + if (ret) { + dev_err(&pdev->dev, "failed to request tx irq: %d\n", + ret); + goto err_clk; + } + + ret = devm_request_irq(&pdev->dev, rtsirq, imx_uart_rtsint, 0, + dev_name(&pdev->dev), sport); + if (ret) { + dev_err(&pdev->dev, "failed to request rts irq: %d\n", + ret); + goto err_clk; + } + } else { + ret = devm_request_irq(&pdev->dev, rxirq, imx_uart_int, 0, + dev_name(&pdev->dev), sport); + if (ret) { + dev_err(&pdev->dev, "failed to request irq: %d\n", ret); + goto err_clk; + } + } + + imx_uart_ports[sport->port.line] = sport; + + platform_set_drvdata(pdev, sport); + + ret = uart_add_one_port(&imx_uart_uart_driver, &sport->port); + +err_clk: + clk_disable_unprepare(sport->clk_ipg); + + return ret; +} + +static int imx_uart_remove(struct platform_device *pdev) +{ + struct imx_port *sport = platform_get_drvdata(pdev); + + return uart_remove_one_port(&imx_uart_uart_driver, &sport->port); +} + +static void imx_uart_restore_context(struct imx_port *sport) +{ + unsigned long flags; + + spin_lock_irqsave(&sport->port.lock, flags); + if (!sport->context_saved) { + spin_unlock_irqrestore(&sport->port.lock, flags); + return; + } + + imx_uart_writel(sport, sport->saved_reg[4], UFCR); + imx_uart_writel(sport, sport->saved_reg[5], UESC); + imx_uart_writel(sport, sport->saved_reg[6], UTIM); + imx_uart_writel(sport, sport->saved_reg[7], UBIR); + imx_uart_writel(sport, sport->saved_reg[8], UBMR); + imx_uart_writel(sport, sport->saved_reg[9], IMX21_UTS); + imx_uart_writel(sport, sport->saved_reg[0], UCR1); + imx_uart_writel(sport, sport->saved_reg[1] | UCR2_SRST, UCR2); + imx_uart_writel(sport, sport->saved_reg[2], UCR3); + imx_uart_writel(sport, sport->saved_reg[3], UCR4); + sport->context_saved = false; + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +static void imx_uart_save_context(struct imx_port *sport) +{ + unsigned long flags; + + /* Save necessary regs */ + spin_lock_irqsave(&sport->port.lock, flags); + sport->saved_reg[0] = imx_uart_readl(sport, UCR1); + sport->saved_reg[1] = imx_uart_readl(sport, UCR2); + sport->saved_reg[2] = imx_uart_readl(sport, UCR3); + sport->saved_reg[3] = imx_uart_readl(sport, UCR4); + sport->saved_reg[4] = imx_uart_readl(sport, UFCR); + sport->saved_reg[5] = imx_uart_readl(sport, UESC); + sport->saved_reg[6] = imx_uart_readl(sport, UTIM); + sport->saved_reg[7] = imx_uart_readl(sport, UBIR); + sport->saved_reg[8] = imx_uart_readl(sport, UBMR); + sport->saved_reg[9] = imx_uart_readl(sport, IMX21_UTS); + sport->context_saved = true; + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +static void imx_uart_enable_wakeup(struct imx_port *sport, bool on) +{ + u32 ucr3; + + ucr3 = imx_uart_readl(sport, UCR3); + if (on) { + imx_uart_writel(sport, USR1_AWAKE, USR1); + ucr3 |= UCR3_AWAKEN; + } else { + ucr3 &= ~UCR3_AWAKEN; + } + imx_uart_writel(sport, ucr3, UCR3); + + if (sport->have_rtscts) { + u32 ucr1 = imx_uart_readl(sport, UCR1); + if (on) + ucr1 |= UCR1_RTSDEN; + else + ucr1 &= ~UCR1_RTSDEN; + imx_uart_writel(sport, ucr1, UCR1); + } +} + +static int imx_uart_suspend_noirq(struct device *dev) +{ + struct imx_port *sport = dev_get_drvdata(dev); + + imx_uart_save_context(sport); + + clk_disable(sport->clk_ipg); + + pinctrl_pm_select_sleep_state(dev); + + return 0; +} + +static int imx_uart_resume_noirq(struct device *dev) +{ + struct imx_port *sport = dev_get_drvdata(dev); + int ret; + + pinctrl_pm_select_default_state(dev); + + ret = clk_enable(sport->clk_ipg); + if (ret) + return ret; + + imx_uart_restore_context(sport); + + return 0; +} + +static int imx_uart_suspend(struct device *dev) +{ + struct imx_port *sport = dev_get_drvdata(dev); + int ret; + + uart_suspend_port(&imx_uart_uart_driver, &sport->port); + disable_irq(sport->port.irq); + + ret = clk_prepare_enable(sport->clk_ipg); + if (ret) + return ret; + + /* enable wakeup from i.MX UART */ + imx_uart_enable_wakeup(sport, true); + + return 0; +} + +static int imx_uart_resume(struct device *dev) +{ + struct imx_port *sport = dev_get_drvdata(dev); + + /* disable wakeup from i.MX UART */ + imx_uart_enable_wakeup(sport, false); + + uart_resume_port(&imx_uart_uart_driver, &sport->port); + enable_irq(sport->port.irq); + + clk_disable_unprepare(sport->clk_ipg); + + return 0; +} + +static int imx_uart_freeze(struct device *dev) +{ + struct imx_port *sport = dev_get_drvdata(dev); + + uart_suspend_port(&imx_uart_uart_driver, &sport->port); + + return clk_prepare_enable(sport->clk_ipg); +} + +static int imx_uart_thaw(struct device *dev) +{ + struct imx_port *sport = dev_get_drvdata(dev); + + uart_resume_port(&imx_uart_uart_driver, &sport->port); + + clk_disable_unprepare(sport->clk_ipg); + + return 0; +} + +static const struct dev_pm_ops imx_uart_pm_ops = { + .suspend_noirq = imx_uart_suspend_noirq, + .resume_noirq = imx_uart_resume_noirq, + .freeze_noirq = imx_uart_suspend_noirq, + .thaw_noirq = imx_uart_resume_noirq, + .restore_noirq = imx_uart_resume_noirq, + .suspend = imx_uart_suspend, + .resume = imx_uart_resume, + .freeze = imx_uart_freeze, + .thaw = imx_uart_thaw, + .restore = imx_uart_thaw, +}; + +static struct platform_driver imx_uart_platform_driver = { + .probe = imx_uart_probe, + .remove = imx_uart_remove, + + .id_table = imx_uart_devtype, + .driver = { + .name = "imx-uart", + .of_match_table = imx_uart_dt_ids, + .pm = &imx_uart_pm_ops, + }, +}; + +static int __init imx_uart_init(void) +{ + int ret = uart_register_driver(&imx_uart_uart_driver); + + if (ret) + return ret; + + ret = platform_driver_register(&imx_uart_platform_driver); + if (ret != 0) + uart_unregister_driver(&imx_uart_uart_driver); + + return ret; +} + +static void __exit imx_uart_exit(void) +{ + platform_driver_unregister(&imx_uart_platform_driver); + uart_unregister_driver(&imx_uart_uart_driver); +} + +module_init(imx_uart_init); +module_exit(imx_uart_exit); + +MODULE_AUTHOR("Sascha Hauer"); +MODULE_DESCRIPTION("IMX generic serial port driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:imx-uart"); diff --git a/drivers/tty/serial/imx_earlycon.c b/drivers/tty/serial/imx_earlycon.c new file mode 100644 index 000000000..795606e1a --- /dev/null +++ b/drivers/tty/serial/imx_earlycon.c @@ -0,0 +1,50 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2020 NXP + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define URTX0 0x40 /* Transmitter Register */ +#define UTS_TXFULL (1<<4) /* TxFIFO full */ +#define IMX21_UTS 0xb4 /* UART Test Register on all other i.mx*/ + +static void imx_uart_console_early_putchar(struct uart_port *port, int ch) +{ + while (readl_relaxed(port->membase + IMX21_UTS) & UTS_TXFULL) + cpu_relax(); + + writel_relaxed(ch, port->membase + URTX0); +} + +static void imx_uart_console_early_write(struct console *con, const char *s, + unsigned count) +{ + struct earlycon_device *dev = con->data; + + uart_console_write(&dev->port, s, count, imx_uart_console_early_putchar); +} + +static int __init +imx_console_early_setup(struct earlycon_device *dev, const char *opt) +{ + if (!dev->port.membase) + return -ENODEV; + + dev->con->write = imx_uart_console_early_write; + + return 0; +} +OF_EARLYCON_DECLARE(ec_imx6q, "fsl,imx6q-uart", imx_console_early_setup); +OF_EARLYCON_DECLARE(ec_imx21, "fsl,imx21-uart", imx_console_early_setup); + +MODULE_AUTHOR("NXP"); +MODULE_DESCRIPTION("IMX earlycon driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/ip22zilog.c b/drivers/tty/serial/ip22zilog.c new file mode 100644 index 000000000..86fff69d7 --- /dev/null +++ b/drivers/tty/serial/ip22zilog.c @@ -0,0 +1,1223 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for Zilog serial chips found on SGI workstations and + * servers. This driver could actually be made more generic. + * + * This is based on the drivers/serial/sunzilog.c code as of 2.6.0-test7 and the + * old drivers/sgi/char/sgiserial.c code which itself is based of the original + * drivers/sbus/char/zs.c code. A lot of code has been simply moved over + * directly from there but much has been rewritten. Credits therefore go out + * to David S. Miller, Eddie C. Dost, Pete Zaitcev, Ted Ts'o and Alex Buell + * for their work there. + * + * Copyright (C) 2002 Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 2002 David S. Miller (davem@redhat.com) + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include + +#include "ip22zilog.h" + +/* + * On IP22 we need to delay after register accesses but we do not need to + * flush writes. + */ +#define ZSDELAY() udelay(5) +#define ZSDELAY_LONG() udelay(20) +#define ZS_WSYNC(channel) do { } while (0) + +#define NUM_IP22ZILOG 1 +#define NUM_CHANNELS (NUM_IP22ZILOG * 2) + +#define ZS_CLOCK 3672000 /* Zilog input clock rate. */ +#define ZS_CLOCK_DIVISOR 16 /* Divisor this driver uses. */ + +/* + * We wrap our port structure around the generic uart_port. + */ +struct uart_ip22zilog_port { + struct uart_port port; + + /* IRQ servicing chain. */ + struct uart_ip22zilog_port *next; + + /* Current values of Zilog write registers. */ + unsigned char curregs[NUM_ZSREGS]; + + unsigned int flags; +#define IP22ZILOG_FLAG_IS_CONS 0x00000004 +#define IP22ZILOG_FLAG_IS_KGDB 0x00000008 +#define IP22ZILOG_FLAG_MODEM_STATUS 0x00000010 +#define IP22ZILOG_FLAG_IS_CHANNEL_A 0x00000020 +#define IP22ZILOG_FLAG_REGS_HELD 0x00000040 +#define IP22ZILOG_FLAG_TX_STOPPED 0x00000080 +#define IP22ZILOG_FLAG_TX_ACTIVE 0x00000100 +#define IP22ZILOG_FLAG_RESET_DONE 0x00000200 + + unsigned int tty_break; + + unsigned char parity_mask; + unsigned char prev_status; +}; + +#define ZILOG_CHANNEL_FROM_PORT(PORT) ((struct zilog_channel *)((PORT)->membase)) +#define UART_ZILOG(PORT) ((struct uart_ip22zilog_port *)(PORT)) +#define IP22ZILOG_GET_CURR_REG(PORT, REGNUM) \ + (UART_ZILOG(PORT)->curregs[REGNUM]) +#define IP22ZILOG_SET_CURR_REG(PORT, REGNUM, REGVAL) \ + ((UART_ZILOG(PORT)->curregs[REGNUM]) = (REGVAL)) +#define ZS_IS_CONS(UP) ((UP)->flags & IP22ZILOG_FLAG_IS_CONS) +#define ZS_IS_KGDB(UP) ((UP)->flags & IP22ZILOG_FLAG_IS_KGDB) +#define ZS_WANTS_MODEM_STATUS(UP) ((UP)->flags & IP22ZILOG_FLAG_MODEM_STATUS) +#define ZS_IS_CHANNEL_A(UP) ((UP)->flags & IP22ZILOG_FLAG_IS_CHANNEL_A) +#define ZS_REGS_HELD(UP) ((UP)->flags & IP22ZILOG_FLAG_REGS_HELD) +#define ZS_TX_STOPPED(UP) ((UP)->flags & IP22ZILOG_FLAG_TX_STOPPED) +#define ZS_TX_ACTIVE(UP) ((UP)->flags & IP22ZILOG_FLAG_TX_ACTIVE) + +/* Reading and writing Zilog8530 registers. The delays are to make this + * driver work on the IP22 which needs a settling delay after each chip + * register access, other machines handle this in hardware via auxiliary + * flip-flops which implement the settle time we do in software. + * + * The port lock must be held and local IRQs must be disabled + * when {read,write}_zsreg is invoked. + */ +static unsigned char read_zsreg(struct zilog_channel *channel, + unsigned char reg) +{ + unsigned char retval; + + writeb(reg, &channel->control); + ZSDELAY(); + retval = readb(&channel->control); + ZSDELAY(); + + return retval; +} + +static void write_zsreg(struct zilog_channel *channel, + unsigned char reg, unsigned char value) +{ + writeb(reg, &channel->control); + ZSDELAY(); + writeb(value, &channel->control); + ZSDELAY(); +} + +static void ip22zilog_clear_fifo(struct zilog_channel *channel) +{ + int i; + + for (i = 0; i < 32; i++) { + unsigned char regval; + + regval = readb(&channel->control); + ZSDELAY(); + if (regval & Rx_CH_AV) + break; + + regval = read_zsreg(channel, R1); + readb(&channel->data); + ZSDELAY(); + + if (regval & (PAR_ERR | Rx_OVR | CRC_ERR)) { + writeb(ERR_RES, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + } + } +} + +/* This function must only be called when the TX is not busy. The UART + * port lock must be held and local interrupts disabled. + */ +static void __load_zsregs(struct zilog_channel *channel, unsigned char *regs) +{ + int i; + + /* Let pending transmits finish. */ + for (i = 0; i < 1000; i++) { + unsigned char stat = read_zsreg(channel, R1); + if (stat & ALL_SNT) + break; + udelay(100); + } + + writeb(ERR_RES, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + + ip22zilog_clear_fifo(channel); + + /* Disable all interrupts. */ + write_zsreg(channel, R1, + regs[R1] & ~(RxINT_MASK | TxINT_ENAB | EXT_INT_ENAB)); + + /* Set parity, sync config, stop bits, and clock divisor. */ + write_zsreg(channel, R4, regs[R4]); + + /* Set misc. TX/RX control bits. */ + write_zsreg(channel, R10, regs[R10]); + + /* Set TX/RX controls sans the enable bits. */ + write_zsreg(channel, R3, regs[R3] & ~RxENAB); + write_zsreg(channel, R5, regs[R5] & ~TxENAB); + + /* Synchronous mode config. */ + write_zsreg(channel, R6, regs[R6]); + write_zsreg(channel, R7, regs[R7]); + + /* Don't mess with the interrupt vector (R2, unused by us) and + * master interrupt control (R9). We make sure this is setup + * properly at probe time then never touch it again. + */ + + /* Disable baud generator. */ + write_zsreg(channel, R14, regs[R14] & ~BRENAB); + + /* Clock mode control. */ + write_zsreg(channel, R11, regs[R11]); + + /* Lower and upper byte of baud rate generator divisor. */ + write_zsreg(channel, R12, regs[R12]); + write_zsreg(channel, R13, regs[R13]); + + /* Now rewrite R14, with BRENAB (if set). */ + write_zsreg(channel, R14, regs[R14]); + + /* External status interrupt control. */ + write_zsreg(channel, R15, regs[R15]); + + /* Reset external status interrupts. */ + write_zsreg(channel, R0, RES_EXT_INT); + write_zsreg(channel, R0, RES_EXT_INT); + + /* Rewrite R3/R5, this time without enables masked. */ + write_zsreg(channel, R3, regs[R3]); + write_zsreg(channel, R5, regs[R5]); + + /* Rewrite R1, this time without IRQ enabled masked. */ + write_zsreg(channel, R1, regs[R1]); +} + +/* Reprogram the Zilog channel HW registers with the copies found in the + * software state struct. If the transmitter is busy, we defer this update + * until the next TX complete interrupt. Else, we do it right now. + * + * The UART port lock must be held and local interrupts disabled. + */ +static void ip22zilog_maybe_update_regs(struct uart_ip22zilog_port *up, + struct zilog_channel *channel) +{ + if (!ZS_REGS_HELD(up)) { + if (ZS_TX_ACTIVE(up)) { + up->flags |= IP22ZILOG_FLAG_REGS_HELD; + } else { + __load_zsregs(channel, up->curregs); + } + } +} + +#define Rx_BRK 0x0100 /* BREAK event software flag. */ +#define Rx_SYS 0x0200 /* SysRq event software flag. */ + +static bool ip22zilog_receive_chars(struct uart_ip22zilog_port *up, + struct zilog_channel *channel) +{ + unsigned char ch, flag; + unsigned int r1; + bool push = up->port.state != NULL; + + for (;;) { + ch = readb(&channel->control); + ZSDELAY(); + if (!(ch & Rx_CH_AV)) + break; + + r1 = read_zsreg(channel, R1); + if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) { + writeb(ERR_RES, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + } + + ch = readb(&channel->data); + ZSDELAY(); + + ch &= up->parity_mask; + + /* Handle the null char got when BREAK is removed. */ + if (!ch) + r1 |= up->tty_break; + + /* A real serial line, record the character and status. */ + flag = TTY_NORMAL; + up->port.icount.rx++; + if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR | Rx_SYS | Rx_BRK)) { + up->tty_break = 0; + + if (r1 & (Rx_SYS | Rx_BRK)) { + up->port.icount.brk++; + if (r1 & Rx_SYS) + continue; + r1 &= ~(PAR_ERR | CRC_ERR); + } + else if (r1 & PAR_ERR) + up->port.icount.parity++; + else if (r1 & CRC_ERR) + up->port.icount.frame++; + if (r1 & Rx_OVR) + up->port.icount.overrun++; + r1 &= up->port.read_status_mask; + if (r1 & Rx_BRK) + flag = TTY_BREAK; + else if (r1 & PAR_ERR) + flag = TTY_PARITY; + else if (r1 & CRC_ERR) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(&up->port, ch)) + continue; + + if (push) + uart_insert_char(&up->port, r1, Rx_OVR, ch, flag); + } + return push; +} + +static void ip22zilog_status_handle(struct uart_ip22zilog_port *up, + struct zilog_channel *channel) +{ + unsigned char status; + + status = readb(&channel->control); + ZSDELAY(); + + writeb(RES_EXT_INT, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + + if (up->curregs[R15] & BRKIE) { + if ((status & BRK_ABRT) && !(up->prev_status & BRK_ABRT)) { + if (uart_handle_break(&up->port)) + up->tty_break = Rx_SYS; + else + up->tty_break = Rx_BRK; + } + } + + if (ZS_WANTS_MODEM_STATUS(up)) { + if (status & SYNC) + up->port.icount.dsr++; + + /* The Zilog just gives us an interrupt when DCD/CTS/etc. change. + * But it does not tell us which bit has changed, we have to keep + * track of this ourselves. + */ + if ((status ^ up->prev_status) ^ DCD) + uart_handle_dcd_change(&up->port, + (status & DCD)); + if ((status ^ up->prev_status) ^ CTS) + uart_handle_cts_change(&up->port, + (status & CTS)); + + wake_up_interruptible(&up->port.state->port.delta_msr_wait); + } + + up->prev_status = status; +} + +static void ip22zilog_transmit_chars(struct uart_ip22zilog_port *up, + struct zilog_channel *channel) +{ + struct circ_buf *xmit; + + if (ZS_IS_CONS(up)) { + unsigned char status = readb(&channel->control); + ZSDELAY(); + + /* TX still busy? Just wait for the next TX done interrupt. + * + * It can occur because of how we do serial console writes. It would + * be nice to transmit console writes just like we normally would for + * a TTY line. (ie. buffered and TX interrupt driven). That is not + * easy because console writes cannot sleep. One solution might be + * to poll on enough port->xmit space becoming free. -DaveM + */ + if (!(status & Tx_BUF_EMP)) + return; + } + + up->flags &= ~IP22ZILOG_FLAG_TX_ACTIVE; + + if (ZS_REGS_HELD(up)) { + __load_zsregs(channel, up->curregs); + up->flags &= ~IP22ZILOG_FLAG_REGS_HELD; + } + + if (ZS_TX_STOPPED(up)) { + up->flags &= ~IP22ZILOG_FLAG_TX_STOPPED; + goto ack_tx_int; + } + + if (up->port.x_char) { + up->flags |= IP22ZILOG_FLAG_TX_ACTIVE; + writeb(up->port.x_char, &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); + + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + + if (up->port.state == NULL) + goto ack_tx_int; + xmit = &up->port.state->xmit; + if (uart_circ_empty(xmit)) + goto ack_tx_int; + if (uart_tx_stopped(&up->port)) + goto ack_tx_int; + + up->flags |= IP22ZILOG_FLAG_TX_ACTIVE; + writeb(xmit->buf[xmit->tail], &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + return; + +ack_tx_int: + writeb(RES_Tx_P, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); +} + +static irqreturn_t ip22zilog_interrupt(int irq, void *dev_id) +{ + struct uart_ip22zilog_port *up = dev_id; + + while (up) { + struct zilog_channel *channel + = ZILOG_CHANNEL_FROM_PORT(&up->port); + unsigned char r3; + bool push = false; + + spin_lock(&up->port.lock); + r3 = read_zsreg(channel, R3); + + /* Channel A */ + if (r3 & (CHAEXT | CHATxIP | CHARxIP)) { + writeb(RES_H_IUS, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + + if (r3 & CHARxIP) + push = ip22zilog_receive_chars(up, channel); + if (r3 & CHAEXT) + ip22zilog_status_handle(up, channel); + if (r3 & CHATxIP) + ip22zilog_transmit_chars(up, channel); + } + spin_unlock(&up->port.lock); + + if (push) + tty_flip_buffer_push(&up->port.state->port); + + /* Channel B */ + up = up->next; + channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + push = false; + + spin_lock(&up->port.lock); + if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) { + writeb(RES_H_IUS, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + + if (r3 & CHBRxIP) + push = ip22zilog_receive_chars(up, channel); + if (r3 & CHBEXT) + ip22zilog_status_handle(up, channel); + if (r3 & CHBTxIP) + ip22zilog_transmit_chars(up, channel); + } + spin_unlock(&up->port.lock); + + if (push) + tty_flip_buffer_push(&up->port.state->port); + + up = up->next; + } + + return IRQ_HANDLED; +} + +/* A convenient way to quickly get R0 status. The caller must _not_ hold the + * port lock, it is acquired here. + */ +static __inline__ unsigned char ip22zilog_read_channel_status(struct uart_port *port) +{ + struct zilog_channel *channel; + unsigned char status; + + channel = ZILOG_CHANNEL_FROM_PORT(port); + status = readb(&channel->control); + ZSDELAY(); + + return status; +} + +/* The port lock is not held. */ +static unsigned int ip22zilog_tx_empty(struct uart_port *port) +{ + unsigned long flags; + unsigned char status; + unsigned int ret; + + spin_lock_irqsave(&port->lock, flags); + + status = ip22zilog_read_channel_status(port); + + spin_unlock_irqrestore(&port->lock, flags); + + if (status & Tx_BUF_EMP) + ret = TIOCSER_TEMT; + else + ret = 0; + + return ret; +} + +/* The port lock is held and interrupts are disabled. */ +static unsigned int ip22zilog_get_mctrl(struct uart_port *port) +{ + unsigned char status; + unsigned int ret; + + status = ip22zilog_read_channel_status(port); + + ret = 0; + if (status & DCD) + ret |= TIOCM_CAR; + if (status & SYNC) + ret |= TIOCM_DSR; + if (status & CTS) + ret |= TIOCM_CTS; + + return ret; +} + +/* The port lock is held and interrupts are disabled. */ +static void ip22zilog_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_ip22zilog_port *up = + container_of(port, struct uart_ip22zilog_port, port); + struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port); + unsigned char set_bits, clear_bits; + + set_bits = clear_bits = 0; + + if (mctrl & TIOCM_RTS) + set_bits |= RTS; + else + clear_bits |= RTS; + if (mctrl & TIOCM_DTR) + set_bits |= DTR; + else + clear_bits |= DTR; + + /* NOTE: Not subject to 'transmitter active' rule. */ + up->curregs[R5] |= set_bits; + up->curregs[R5] &= ~clear_bits; + write_zsreg(channel, R5, up->curregs[R5]); +} + +/* The port lock is held and interrupts are disabled. */ +static void ip22zilog_stop_tx(struct uart_port *port) +{ + struct uart_ip22zilog_port *up = + container_of(port, struct uart_ip22zilog_port, port); + + up->flags |= IP22ZILOG_FLAG_TX_STOPPED; +} + +/* The port lock is held and interrupts are disabled. */ +static void ip22zilog_start_tx(struct uart_port *port) +{ + struct uart_ip22zilog_port *up = + container_of(port, struct uart_ip22zilog_port, port); + struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port); + unsigned char status; + + up->flags |= IP22ZILOG_FLAG_TX_ACTIVE; + up->flags &= ~IP22ZILOG_FLAG_TX_STOPPED; + + status = readb(&channel->control); + ZSDELAY(); + + /* TX busy? Just wait for the TX done interrupt. */ + if (!(status & Tx_BUF_EMP)) + return; + + /* Send the first character to jump-start the TX done + * IRQ sending engine. + */ + if (port->x_char) { + writeb(port->x_char, &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); + + port->icount.tx++; + port->x_char = 0; + } else { + struct circ_buf *xmit = &port->state->xmit; + + if (uart_circ_empty(xmit)) + return; + writeb(xmit->buf[xmit->tail], &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + } +} + +/* The port lock is held and interrupts are disabled. */ +static void ip22zilog_stop_rx(struct uart_port *port) +{ + struct uart_ip22zilog_port *up = UART_ZILOG(port); + struct zilog_channel *channel; + + if (ZS_IS_CONS(up)) + return; + + channel = ZILOG_CHANNEL_FROM_PORT(port); + + /* Disable all RX interrupts. */ + up->curregs[R1] &= ~RxINT_MASK; + ip22zilog_maybe_update_regs(up, channel); +} + +/* The port lock is held. */ +static void ip22zilog_enable_ms(struct uart_port *port) +{ + struct uart_ip22zilog_port *up = + container_of(port, struct uart_ip22zilog_port, port); + struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port); + unsigned char new_reg; + + new_reg = up->curregs[R15] | (DCDIE | SYNCIE | CTSIE); + if (new_reg != up->curregs[R15]) { + up->curregs[R15] = new_reg; + + /* NOTE: Not subject to 'transmitter active' rule. */ + write_zsreg(channel, R15, up->curregs[R15]); + } +} + +/* The port lock is not held. */ +static void ip22zilog_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_ip22zilog_port *up = + container_of(port, struct uart_ip22zilog_port, port); + struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port); + unsigned char set_bits, clear_bits, new_reg; + unsigned long flags; + + set_bits = clear_bits = 0; + + if (break_state) + set_bits |= SND_BRK; + else + clear_bits |= SND_BRK; + + spin_lock_irqsave(&port->lock, flags); + + new_reg = (up->curregs[R5] | set_bits) & ~clear_bits; + if (new_reg != up->curregs[R5]) { + up->curregs[R5] = new_reg; + + /* NOTE: Not subject to 'transmitter active' rule. */ + write_zsreg(channel, R5, up->curregs[R5]); + } + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void __ip22zilog_reset(struct uart_ip22zilog_port *up) +{ + struct zilog_channel *channel; + int i; + + if (up->flags & IP22ZILOG_FLAG_RESET_DONE) + return; + + /* Let pending transmits finish. */ + channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + for (i = 0; i < 1000; i++) { + unsigned char stat = read_zsreg(channel, R1); + if (stat & ALL_SNT) + break; + udelay(100); + } + + if (!ZS_IS_CHANNEL_A(up)) { + up++; + channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + } + write_zsreg(channel, R9, FHWRES); + ZSDELAY_LONG(); + (void) read_zsreg(channel, R0); + + up->flags |= IP22ZILOG_FLAG_RESET_DONE; + up->next->flags |= IP22ZILOG_FLAG_RESET_DONE; +} + +static void __ip22zilog_startup(struct uart_ip22zilog_port *up) +{ + struct zilog_channel *channel; + + channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + + __ip22zilog_reset(up); + + __load_zsregs(channel, up->curregs); + /* set master interrupt enable */ + write_zsreg(channel, R9, up->curregs[R9]); + up->prev_status = readb(&channel->control); + + /* Enable receiver and transmitter. */ + up->curregs[R3] |= RxENAB; + up->curregs[R5] |= TxENAB; + + up->curregs[R1] |= EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB; + ip22zilog_maybe_update_regs(up, channel); +} + +static int ip22zilog_startup(struct uart_port *port) +{ + struct uart_ip22zilog_port *up = UART_ZILOG(port); + unsigned long flags; + + if (ZS_IS_CONS(up)) + return 0; + + spin_lock_irqsave(&port->lock, flags); + __ip22zilog_startup(up); + spin_unlock_irqrestore(&port->lock, flags); + return 0; +} + +/* + * The test for ZS_IS_CONS is explained by the following e-mail: + ***** + * From: Russell King + * Date: Sun, 8 Dec 2002 10:18:38 +0000 + * + * On Sun, Dec 08, 2002 at 02:43:36AM -0500, Pete Zaitcev wrote: + * > I boot my 2.5 boxes using "console=ttyS0,9600" argument, + * > and I noticed that something is not right with reference + * > counting in this case. It seems that when the console + * > is open by kernel initially, this is not accounted + * > as an open, and uart_startup is not called. + * + * That is correct. We are unable to call uart_startup when the serial + * console is initialised because it may need to allocate memory (as + * request_irq does) and the memory allocators may not have been + * initialised. + * + * 1. initialise the port into a state where it can send characters in the + * console write method. + * + * 2. don't do the actual hardware shutdown in your shutdown() method (but + * do the normal software shutdown - ie, free irqs etc) + ***** + */ +static void ip22zilog_shutdown(struct uart_port *port) +{ + struct uart_ip22zilog_port *up = UART_ZILOG(port); + struct zilog_channel *channel; + unsigned long flags; + + if (ZS_IS_CONS(up)) + return; + + spin_lock_irqsave(&port->lock, flags); + + channel = ZILOG_CHANNEL_FROM_PORT(port); + + /* Disable receiver and transmitter. */ + up->curregs[R3] &= ~RxENAB; + up->curregs[R5] &= ~TxENAB; + + /* Disable all interrupts and BRK assertion. */ + up->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK); + up->curregs[R5] &= ~SND_BRK; + ip22zilog_maybe_update_regs(up, channel); + + spin_unlock_irqrestore(&port->lock, flags); +} + +/* Shared by TTY driver and serial console setup. The port lock is held + * and local interrupts are disabled. + */ +static void +ip22zilog_convert_to_zs(struct uart_ip22zilog_port *up, unsigned int cflag, + unsigned int iflag, int brg) +{ + + up->curregs[R10] = NRZ; + up->curregs[R11] = TCBR | RCBR; + + /* Program BAUD and clock source. */ + up->curregs[R4] &= ~XCLK_MASK; + up->curregs[R4] |= X16CLK; + up->curregs[R12] = brg & 0xff; + up->curregs[R13] = (brg >> 8) & 0xff; + up->curregs[R14] = BRENAB; + + /* Character size, stop bits, and parity. */ + up->curregs[3] &= ~RxN_MASK; + up->curregs[5] &= ~TxN_MASK; + switch (cflag & CSIZE) { + case CS5: + up->curregs[3] |= Rx5; + up->curregs[5] |= Tx5; + up->parity_mask = 0x1f; + break; + case CS6: + up->curregs[3] |= Rx6; + up->curregs[5] |= Tx6; + up->parity_mask = 0x3f; + break; + case CS7: + up->curregs[3] |= Rx7; + up->curregs[5] |= Tx7; + up->parity_mask = 0x7f; + break; + case CS8: + default: + up->curregs[3] |= Rx8; + up->curregs[5] |= Tx8; + up->parity_mask = 0xff; + break; + } + up->curregs[4] &= ~0x0c; + if (cflag & CSTOPB) + up->curregs[4] |= SB2; + else + up->curregs[4] |= SB1; + if (cflag & PARENB) + up->curregs[4] |= PAR_ENAB; + else + up->curregs[4] &= ~PAR_ENAB; + if (!(cflag & PARODD)) + up->curregs[4] |= PAR_EVEN; + else + up->curregs[4] &= ~PAR_EVEN; + + up->port.read_status_mask = Rx_OVR; + if (iflag & INPCK) + up->port.read_status_mask |= CRC_ERR | PAR_ERR; + if (iflag & (IGNBRK | BRKINT | PARMRK)) + up->port.read_status_mask |= BRK_ABRT; + + up->port.ignore_status_mask = 0; + if (iflag & IGNPAR) + up->port.ignore_status_mask |= CRC_ERR | PAR_ERR; + if (iflag & IGNBRK) { + up->port.ignore_status_mask |= BRK_ABRT; + if (iflag & IGNPAR) + up->port.ignore_status_mask |= Rx_OVR; + } + + if ((cflag & CREAD) == 0) + up->port.ignore_status_mask = 0xff; +} + +/* The port lock is not held. */ +static void +ip22zilog_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_ip22zilog_port *up = + container_of(port, struct uart_ip22zilog_port, port); + unsigned long flags; + int baud, brg; + + baud = uart_get_baud_rate(port, termios, old, 1200, 76800); + + spin_lock_irqsave(&up->port.lock, flags); + + brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); + + ip22zilog_convert_to_zs(up, termios->c_cflag, termios->c_iflag, brg); + + if (UART_ENABLE_MS(&up->port, termios->c_cflag)) + up->flags |= IP22ZILOG_FLAG_MODEM_STATUS; + else + up->flags &= ~IP22ZILOG_FLAG_MODEM_STATUS; + + ip22zilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(port)); + uart_update_timeout(port, termios->c_cflag, baud); + + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static const char *ip22zilog_type(struct uart_port *port) +{ + return "IP22-Zilog"; +} + +/* We do not request/release mappings of the registers here, this + * happens at early serial probe time. + */ +static void ip22zilog_release_port(struct uart_port *port) +{ +} + +static int ip22zilog_request_port(struct uart_port *port) +{ + return 0; +} + +/* These do not need to do anything interesting either. */ +static void ip22zilog_config_port(struct uart_port *port, int flags) +{ +} + +/* We do not support letting the user mess with the divisor, IRQ, etc. */ +static int ip22zilog_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + return -EINVAL; +} + +static const struct uart_ops ip22zilog_pops = { + .tx_empty = ip22zilog_tx_empty, + .set_mctrl = ip22zilog_set_mctrl, + .get_mctrl = ip22zilog_get_mctrl, + .stop_tx = ip22zilog_stop_tx, + .start_tx = ip22zilog_start_tx, + .stop_rx = ip22zilog_stop_rx, + .enable_ms = ip22zilog_enable_ms, + .break_ctl = ip22zilog_break_ctl, + .startup = ip22zilog_startup, + .shutdown = ip22zilog_shutdown, + .set_termios = ip22zilog_set_termios, + .type = ip22zilog_type, + .release_port = ip22zilog_release_port, + .request_port = ip22zilog_request_port, + .config_port = ip22zilog_config_port, + .verify_port = ip22zilog_verify_port, +}; + +static struct uart_ip22zilog_port *ip22zilog_port_table; +static struct zilog_layout **ip22zilog_chip_regs; + +static struct uart_ip22zilog_port *ip22zilog_irq_chain; +static int zilog_irq = -1; + +static void * __init alloc_one_table(unsigned long size) +{ + return kzalloc(size, GFP_KERNEL); +} + +static void __init ip22zilog_alloc_tables(void) +{ + ip22zilog_port_table = (struct uart_ip22zilog_port *) + alloc_one_table(NUM_CHANNELS * sizeof(struct uart_ip22zilog_port)); + ip22zilog_chip_regs = (struct zilog_layout **) + alloc_one_table(NUM_IP22ZILOG * sizeof(struct zilog_layout *)); + + if (ip22zilog_port_table == NULL || ip22zilog_chip_regs == NULL) { + panic("IP22-Zilog: Cannot allocate IP22-Zilog tables."); + } +} + +/* Get the address of the registers for IP22-Zilog instance CHIP. */ +static struct zilog_layout * __init get_zs(int chip) +{ + unsigned long base; + + if (chip < 0 || chip >= NUM_IP22ZILOG) { + panic("IP22-Zilog: Illegal chip number %d in get_zs.", chip); + } + + /* Not probe-able, hard code it. */ + base = (unsigned long) &sgioc->uart; + + zilog_irq = SGI_SERIAL_IRQ; + request_mem_region(base, 8, "IP22-Zilog"); + + return (struct zilog_layout *) base; +} + +#define ZS_PUT_CHAR_MAX_DELAY 2000 /* 10 ms */ + +#ifdef CONFIG_SERIAL_IP22_ZILOG_CONSOLE +static void ip22zilog_put_char(struct uart_port *port, int ch) +{ + struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port); + int loops = ZS_PUT_CHAR_MAX_DELAY; + + /* This is a timed polling loop so do not switch the explicit + * udelay with ZSDELAY as that is a NOP on some platforms. -DaveM + */ + do { + unsigned char val = readb(&channel->control); + if (val & Tx_BUF_EMP) { + ZSDELAY(); + break; + } + udelay(5); + } while (--loops); + + writeb(ch, &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); +} + +static void +ip22zilog_console_write(struct console *con, const char *s, unsigned int count) +{ + struct uart_ip22zilog_port *up = &ip22zilog_port_table[con->index]; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + uart_console_write(&up->port, s, count, ip22zilog_put_char); + udelay(2); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static int __init ip22zilog_console_setup(struct console *con, char *options) +{ + struct uart_ip22zilog_port *up = &ip22zilog_port_table[con->index]; + unsigned long flags; + int baud = 9600, bits = 8; + int parity = 'n'; + int flow = 'n'; + + up->flags |= IP22ZILOG_FLAG_IS_CONS; + + printk(KERN_INFO "Console: ttyS%d (IP22-Zilog)\n", con->index); + + spin_lock_irqsave(&up->port.lock, flags); + + up->curregs[R15] |= BRKIE; + + __ip22zilog_startup(up); + + spin_unlock_irqrestore(&up->port.lock, flags); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + return uart_set_options(&up->port, con, baud, parity, bits, flow); +} + +static struct uart_driver ip22zilog_reg; + +static struct console ip22zilog_console = { + .name = "ttyS", + .write = ip22zilog_console_write, + .device = uart_console_device, + .setup = ip22zilog_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &ip22zilog_reg, +}; +#endif /* CONFIG_SERIAL_IP22_ZILOG_CONSOLE */ + +static struct uart_driver ip22zilog_reg = { + .owner = THIS_MODULE, + .driver_name = "serial", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .nr = NUM_CHANNELS, +#ifdef CONFIG_SERIAL_IP22_ZILOG_CONSOLE + .cons = &ip22zilog_console, +#endif +}; + +static void __init ip22zilog_prepare(void) +{ + unsigned char sysrq_on = IS_ENABLED(CONFIG_SERIAL_IP22_ZILOG_CONSOLE); + struct uart_ip22zilog_port *up; + struct zilog_layout *rp; + int channel, chip; + + /* + * Temporary fix. + */ + for (channel = 0; channel < NUM_CHANNELS; channel++) + spin_lock_init(&ip22zilog_port_table[channel].port.lock); + + ip22zilog_irq_chain = &ip22zilog_port_table[NUM_CHANNELS - 1]; + up = &ip22zilog_port_table[0]; + for (channel = NUM_CHANNELS - 1 ; channel > 0; channel--) + up[channel].next = &up[channel - 1]; + up[channel].next = NULL; + + for (chip = 0; chip < NUM_IP22ZILOG; chip++) { + if (!ip22zilog_chip_regs[chip]) { + ip22zilog_chip_regs[chip] = rp = get_zs(chip); + + up[(chip * 2) + 0].port.membase = (char *) &rp->channelB; + up[(chip * 2) + 1].port.membase = (char *) &rp->channelA; + + /* In theory mapbase is the physical address ... */ + up[(chip * 2) + 0].port.mapbase = + (unsigned long) ioremap((unsigned long) &rp->channelB, 8); + up[(chip * 2) + 1].port.mapbase = + (unsigned long) ioremap((unsigned long) &rp->channelA, 8); + } + + /* Channel A */ + up[(chip * 2) + 0].port.iotype = UPIO_MEM; + up[(chip * 2) + 0].port.irq = zilog_irq; + up[(chip * 2) + 0].port.uartclk = ZS_CLOCK; + up[(chip * 2) + 0].port.fifosize = 1; + up[(chip * 2) + 0].port.has_sysrq = sysrq_on; + up[(chip * 2) + 0].port.ops = &ip22zilog_pops; + up[(chip * 2) + 0].port.type = PORT_IP22ZILOG; + up[(chip * 2) + 0].port.flags = 0; + up[(chip * 2) + 0].port.line = (chip * 2) + 0; + up[(chip * 2) + 0].flags = 0; + + /* Channel B */ + up[(chip * 2) + 1].port.iotype = UPIO_MEM; + up[(chip * 2) + 1].port.irq = zilog_irq; + up[(chip * 2) + 1].port.uartclk = ZS_CLOCK; + up[(chip * 2) + 1].port.fifosize = 1; + up[(chip * 2) + 1].port.has_sysrq = sysrq_on; + up[(chip * 2) + 1].port.ops = &ip22zilog_pops; + up[(chip * 2) + 1].port.type = PORT_IP22ZILOG; + up[(chip * 2) + 1].port.line = (chip * 2) + 1; + up[(chip * 2) + 1].flags |= IP22ZILOG_FLAG_IS_CHANNEL_A; + } + + for (channel = 0; channel < NUM_CHANNELS; channel++) { + struct uart_ip22zilog_port *up = &ip22zilog_port_table[channel]; + int brg; + + /* Normal serial TTY. */ + up->parity_mask = 0xff; + up->curregs[R1] = EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB; + up->curregs[R4] = PAR_EVEN | X16CLK | SB1; + up->curregs[R3] = RxENAB | Rx8; + up->curregs[R5] = TxENAB | Tx8; + up->curregs[R9] = NV | MIE; + up->curregs[R10] = NRZ; + up->curregs[R11] = TCBR | RCBR; + brg = BPS_TO_BRG(9600, ZS_CLOCK / ZS_CLOCK_DIVISOR); + up->curregs[R12] = (brg & 0xff); + up->curregs[R13] = (brg >> 8) & 0xff; + up->curregs[R14] = BRENAB; + } +} + +static int __init ip22zilog_ports_init(void) +{ + int ret; + + printk(KERN_INFO "Serial: IP22 Zilog driver (%d chips).\n", NUM_IP22ZILOG); + + ip22zilog_prepare(); + + if (request_irq(zilog_irq, ip22zilog_interrupt, 0, + "IP22-Zilog", ip22zilog_irq_chain)) { + panic("IP22-Zilog: Unable to register zs interrupt handler.\n"); + } + + ret = uart_register_driver(&ip22zilog_reg); + if (ret == 0) { + int i; + + for (i = 0; i < NUM_CHANNELS; i++) { + struct uart_ip22zilog_port *up = &ip22zilog_port_table[i]; + + uart_add_one_port(&ip22zilog_reg, &up->port); + } + } + + return ret; +} + +static int __init ip22zilog_init(void) +{ + /* IP22 Zilog setup is hard coded, no probing to do. */ + ip22zilog_alloc_tables(); + ip22zilog_ports_init(); + + return 0; +} + +static void __exit ip22zilog_exit(void) +{ + int i; + struct uart_ip22zilog_port *up; + + for (i = 0; i < NUM_CHANNELS; i++) { + up = &ip22zilog_port_table[i]; + + uart_remove_one_port(&ip22zilog_reg, &up->port); + } + + /* Free IO mem */ + up = &ip22zilog_port_table[0]; + for (i = 0; i < NUM_IP22ZILOG; i++) { + if (up[(i * 2) + 0].port.mapbase) { + iounmap((void*)up[(i * 2) + 0].port.mapbase); + up[(i * 2) + 0].port.mapbase = 0; + } + if (up[(i * 2) + 1].port.mapbase) { + iounmap((void*)up[(i * 2) + 1].port.mapbase); + up[(i * 2) + 1].port.mapbase = 0; + } + } + + uart_unregister_driver(&ip22zilog_reg); +} + +module_init(ip22zilog_init); +module_exit(ip22zilog_exit); + +/* David wrote it but I'm to blame for the bugs ... */ +MODULE_AUTHOR("Ralf Baechle "); +MODULE_DESCRIPTION("SGI Zilog serial port driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/ip22zilog.h b/drivers/tty/serial/ip22zilog.h new file mode 100644 index 000000000..b52801fe2 --- /dev/null +++ b/drivers/tty/serial/ip22zilog.h @@ -0,0 +1,282 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _IP22_ZILOG_H +#define _IP22_ZILOG_H + +#include + +struct zilog_channel { +#ifdef __BIG_ENDIAN + volatile unsigned char unused0[3]; + volatile unsigned char control; + volatile unsigned char unused1[3]; + volatile unsigned char data; +#else /* __LITTLE_ENDIAN */ + volatile unsigned char control; + volatile unsigned char unused0[3]; + volatile unsigned char data; + volatile unsigned char unused1[3]; +#endif +}; + +struct zilog_layout { + struct zilog_channel channelB; + struct zilog_channel channelA; +}; + +#define NUM_ZSREGS 16 + +/* Conversion routines to/from brg time constants from/to bits + * per second. + */ +#define BRG_TO_BPS(brg, freq) ((freq) / 2 / ((brg) + 2)) +#define BPS_TO_BRG(bps, freq) ((((freq) + (bps)) / (2 * (bps))) - 2) + +/* The Zilog register set */ + +#define FLAG 0x7e + +/* Write Register 0 */ +#define R0 0 /* Register selects */ +#define R1 1 +#define R2 2 +#define R3 3 +#define R4 4 +#define R5 5 +#define R6 6 +#define R7 7 +#define R8 8 +#define R9 9 +#define R10 10 +#define R11 11 +#define R12 12 +#define R13 13 +#define R14 14 +#define R15 15 + +#define NULLCODE 0 /* Null Code */ +#define POINT_HIGH 0x8 /* Select upper half of registers */ +#define RES_EXT_INT 0x10 /* Reset Ext. Status Interrupts */ +#define SEND_ABORT 0x18 /* HDLC Abort */ +#define RES_RxINT_FC 0x20 /* Reset RxINT on First Character */ +#define RES_Tx_P 0x28 /* Reset TxINT Pending */ +#define ERR_RES 0x30 /* Error Reset */ +#define RES_H_IUS 0x38 /* Reset highest IUS */ + +#define RES_Rx_CRC 0x40 /* Reset Rx CRC Checker */ +#define RES_Tx_CRC 0x80 /* Reset Tx CRC Checker */ +#define RES_EOM_L 0xC0 /* Reset EOM latch */ + +/* Write Register 1 */ + +#define EXT_INT_ENAB 0x1 /* Ext Int Enable */ +#define TxINT_ENAB 0x2 /* Tx Int Enable */ +#define PAR_SPEC 0x4 /* Parity is special condition */ + +#define RxINT_DISAB 0 /* Rx Int Disable */ +#define RxINT_FCERR 0x8 /* Rx Int on First Character Only or Error */ +#define INT_ALL_Rx 0x10 /* Int on all Rx Characters or error */ +#define INT_ERR_Rx 0x18 /* Int on error only */ +#define RxINT_MASK 0x18 + +#define WT_RDY_RT 0x20 /* Wait/Ready on R/T */ +#define WT_FN_RDYFN 0x40 /* Wait/FN/Ready FN */ +#define WT_RDY_ENAB 0x80 /* Wait/Ready Enable */ + +/* Write Register #2 (Interrupt Vector) */ + +/* Write Register 3 */ + +#define RxENAB 0x1 /* Rx Enable */ +#define SYNC_L_INH 0x2 /* Sync Character Load Inhibit */ +#define ADD_SM 0x4 /* Address Search Mode (SDLC) */ +#define RxCRC_ENAB 0x8 /* Rx CRC Enable */ +#define ENT_HM 0x10 /* Enter Hunt Mode */ +#define AUTO_ENAB 0x20 /* Auto Enables */ +#define Rx5 0x0 /* Rx 5 Bits/Character */ +#define Rx7 0x40 /* Rx 7 Bits/Character */ +#define Rx6 0x80 /* Rx 6 Bits/Character */ +#define Rx8 0xc0 /* Rx 8 Bits/Character */ +#define RxN_MASK 0xc0 + +/* Write Register 4 */ + +#define PAR_ENAB 0x1 /* Parity Enable */ +#define PAR_EVEN 0x2 /* Parity Even/Odd* */ + +#define SYNC_ENAB 0 /* Sync Modes Enable */ +#define SB1 0x4 /* 1 stop bit/char */ +#define SB15 0x8 /* 1.5 stop bits/char */ +#define SB2 0xc /* 2 stop bits/char */ + +#define MONSYNC 0 /* 8 Bit Sync character */ +#define BISYNC 0x10 /* 16 bit sync character */ +#define SDLC 0x20 /* SDLC Mode (01111110 Sync Flag) */ +#define EXTSYNC 0x30 /* External Sync Mode */ + +#define X1CLK 0x0 /* x1 clock mode */ +#define X16CLK 0x40 /* x16 clock mode */ +#define X32CLK 0x80 /* x32 clock mode */ +#define X64CLK 0xC0 /* x64 clock mode */ +#define XCLK_MASK 0xC0 + +/* Write Register 5 */ + +#define TxCRC_ENAB 0x1 /* Tx CRC Enable */ +#define RTS 0x2 /* RTS */ +#define SDLC_CRC 0x4 /* SDLC/CRC-16 */ +#define TxENAB 0x8 /* Tx Enable */ +#define SND_BRK 0x10 /* Send Break */ +#define Tx5 0x0 /* Tx 5 bits (or less)/character */ +#define Tx7 0x20 /* Tx 7 bits/character */ +#define Tx6 0x40 /* Tx 6 bits/character */ +#define Tx8 0x60 /* Tx 8 bits/character */ +#define TxN_MASK 0x60 +#define DTR 0x80 /* DTR */ + +/* Write Register 6 (Sync bits 0-7/SDLC Address Field) */ + +/* Write Register 7 (Sync bits 8-15/SDLC 01111110) */ + +/* Write Register 8 (transmit buffer) */ + +/* Write Register 9 (Master interrupt control) */ +#define VIS 1 /* Vector Includes Status */ +#define NV 2 /* No Vector */ +#define DLC 4 /* Disable Lower Chain */ +#define MIE 8 /* Master Interrupt Enable */ +#define STATHI 0x10 /* Status high */ +#define NORESET 0 /* No reset on write to R9 */ +#define CHRB 0x40 /* Reset channel B */ +#define CHRA 0x80 /* Reset channel A */ +#define FHWRES 0xc0 /* Force hardware reset */ + +/* Write Register 10 (misc control bits) */ +#define BIT6 1 /* 6 bit/8bit sync */ +#define LOOPMODE 2 /* SDLC Loop mode */ +#define ABUNDER 4 /* Abort/flag on SDLC xmit underrun */ +#define MARKIDLE 8 /* Mark/flag on idle */ +#define GAOP 0x10 /* Go active on poll */ +#define NRZ 0 /* NRZ mode */ +#define NRZI 0x20 /* NRZI mode */ +#define FM1 0x40 /* FM1 (transition = 1) */ +#define FM0 0x60 /* FM0 (transition = 0) */ +#define CRCPS 0x80 /* CRC Preset I/O */ + +/* Write Register 11 (Clock Mode control) */ +#define TRxCXT 0 /* TRxC = Xtal output */ +#define TRxCTC 1 /* TRxC = Transmit clock */ +#define TRxCBR 2 /* TRxC = BR Generator Output */ +#define TRxCDP 3 /* TRxC = DPLL output */ +#define TRxCOI 4 /* TRxC O/I */ +#define TCRTxCP 0 /* Transmit clock = RTxC pin */ +#define TCTRxCP 8 /* Transmit clock = TRxC pin */ +#define TCBR 0x10 /* Transmit clock = BR Generator output */ +#define TCDPLL 0x18 /* Transmit clock = DPLL output */ +#define RCRTxCP 0 /* Receive clock = RTxC pin */ +#define RCTRxCP 0x20 /* Receive clock = TRxC pin */ +#define RCBR 0x40 /* Receive clock = BR Generator output */ +#define RCDPLL 0x60 /* Receive clock = DPLL output */ +#define RTxCX 0x80 /* RTxC Xtal/No Xtal */ + +/* Write Register 12 (lower byte of baud rate generator time constant) */ + +/* Write Register 13 (upper byte of baud rate generator time constant) */ + +/* Write Register 14 (Misc control bits) */ +#define BRENAB 1 /* Baud rate generator enable */ +#define BRSRC 2 /* Baud rate generator source */ +#define DTRREQ 4 /* DTR/Request function */ +#define AUTOECHO 8 /* Auto Echo */ +#define LOOPBAK 0x10 /* Local loopback */ +#define SEARCH 0x20 /* Enter search mode */ +#define RMC 0x40 /* Reset missing clock */ +#define DISDPLL 0x60 /* Disable DPLL */ +#define SSBR 0x80 /* Set DPLL source = BR generator */ +#define SSRTxC 0xa0 /* Set DPLL source = RTxC */ +#define SFMM 0xc0 /* Set FM mode */ +#define SNRZI 0xe0 /* Set NRZI mode */ + +/* Write Register 15 (external/status interrupt control) */ +#define ZCIE 2 /* Zero count IE */ +#define DCDIE 8 /* DCD IE */ +#define SYNCIE 0x10 /* Sync/hunt IE */ +#define CTSIE 0x20 /* CTS IE */ +#define TxUIE 0x40 /* Tx Underrun/EOM IE */ +#define BRKIE 0x80 /* Break/Abort IE */ + + +/* Read Register 0 */ +#define Rx_CH_AV 0x1 /* Rx Character Available */ +#define ZCOUNT 0x2 /* Zero count */ +#define Tx_BUF_EMP 0x4 /* Tx Buffer empty */ +#define DCD 0x8 /* DCD */ +#define SYNC 0x10 /* Sync/hunt */ +#define CTS 0x20 /* CTS */ +#define TxEOM 0x40 /* Tx underrun */ +#define BRK_ABRT 0x80 /* Break/Abort */ + +/* Read Register 1 */ +#define ALL_SNT 0x1 /* All sent */ +/* Residue Data for 8 Rx bits/char programmed */ +#define RES3 0x8 /* 0/3 */ +#define RES4 0x4 /* 0/4 */ +#define RES5 0xc /* 0/5 */ +#define RES6 0x2 /* 0/6 */ +#define RES7 0xa /* 0/7 */ +#define RES8 0x6 /* 0/8 */ +#define RES18 0xe /* 1/8 */ +#define RES28 0x0 /* 2/8 */ +/* Special Rx Condition Interrupts */ +#define PAR_ERR 0x10 /* Parity error */ +#define Rx_OVR 0x20 /* Rx Overrun Error */ +#define CRC_ERR 0x40 /* CRC/Framing Error */ +#define END_FR 0x80 /* End of Frame (SDLC) */ + +/* Read Register 2 (channel b only) - Interrupt vector */ +#define CHB_Tx_EMPTY 0x00 +#define CHB_EXT_STAT 0x02 +#define CHB_Rx_AVAIL 0x04 +#define CHB_SPECIAL 0x06 +#define CHA_Tx_EMPTY 0x08 +#define CHA_EXT_STAT 0x0a +#define CHA_Rx_AVAIL 0x0c +#define CHA_SPECIAL 0x0e +#define STATUS_MASK 0x0e + +/* Read Register 3 (interrupt pending register) ch a only */ +#define CHBEXT 0x1 /* Channel B Ext/Stat IP */ +#define CHBTxIP 0x2 /* Channel B Tx IP */ +#define CHBRxIP 0x4 /* Channel B Rx IP */ +#define CHAEXT 0x8 /* Channel A Ext/Stat IP */ +#define CHATxIP 0x10 /* Channel A Tx IP */ +#define CHARxIP 0x20 /* Channel A Rx IP */ + +/* Read Register 8 (receive data register) */ + +/* Read Register 10 (misc status bits) */ +#define ONLOOP 2 /* On loop */ +#define LOOPSEND 0x10 /* Loop sending */ +#define CLK2MIS 0x40 /* Two clocks missing */ +#define CLK1MIS 0x80 /* One clock missing */ + +/* Read Register 12 (lower byte of baud rate generator constant) */ + +/* Read Register 13 (upper byte of baud rate generator constant) */ + +/* Read Register 15 (value of WR 15) */ + +/* Misc macros */ +#define ZS_CLEARERR(channel) do { writeb(ERR_RES, &channel->control); \ + udelay(5); } while(0) + +#define ZS_CLEARSTAT(channel) do { writeb(RES_EXT_INT, &channel->control); \ + udelay(5); } while(0) + +#define ZS_CLEARFIFO(channel) do { readb(&channel->data); \ + udelay(2); \ + readb(&channel->data); \ + udelay(2); \ + readb(&channel->data); \ + udelay(2); } while(0) + +#endif /* _IP22_ZILOG_H */ diff --git a/drivers/tty/serial/jsm/Makefile b/drivers/tty/serial/jsm/Makefile new file mode 100644 index 000000000..4f2dbada7 --- /dev/null +++ b/drivers/tty/serial/jsm/Makefile @@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for Jasmine adapter +# + +obj-$(CONFIG_SERIAL_JSM) += jsm.o + +jsm-objs := jsm_driver.o jsm_neo.o jsm_tty.o jsm_cls.o + diff --git a/drivers/tty/serial/jsm/jsm.h b/drivers/tty/serial/jsm/jsm.h new file mode 100644 index 000000000..8489c07f4 --- /dev/null +++ b/drivers/tty/serial/jsm/jsm.h @@ -0,0 +1,438 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/************************************************************************ + * Copyright 2003 Digi International (www.digi.com) + * + * Copyright (C) 2004 IBM Corporation. All rights reserved. + * + * Contact Information: + * Scott H Kilau + * Wendy Xiong + * + ***********************************************************************/ + +#ifndef __JSM_DRIVER_H +#define __JSM_DRIVER_H + +#include +#include /* To pick up the varions Linux types */ +#include +#include +#include + +/* + * Debugging levels can be set using debug insmod variable + * They can also be compiled out completely. + */ +enum { + DBG_INIT = 0x01, + DBG_BASIC = 0x02, + DBG_CORE = 0x04, + DBG_OPEN = 0x08, + DBG_CLOSE = 0x10, + DBG_READ = 0x20, + DBG_WRITE = 0x40, + DBG_IOCTL = 0x80, + DBG_PROC = 0x100, + DBG_PARAM = 0x200, + DBG_PSCAN = 0x400, + DBG_EVENT = 0x800, + DBG_DRAIN = 0x1000, + DBG_MSIGS = 0x2000, + DBG_MGMT = 0x4000, + DBG_INTR = 0x8000, + DBG_CARR = 0x10000, +}; + +#define jsm_dbg(nlevel, pdev, fmt, ...) \ +do { \ + if (DBG_##nlevel & jsm_debug) \ + dev_dbg(pdev->dev, fmt, ##__VA_ARGS__); \ +} while (0) + +#define MAXLINES 256 +#define MAXPORTS 8 +#define MAX_STOPS_SENT 5 + +/* Board ids */ +#define PCI_DEVICE_ID_CLASSIC_4 0x0028 +#define PCI_DEVICE_ID_CLASSIC_8 0x0029 +#define PCI_DEVICE_ID_CLASSIC_4_422 0x00D0 +#define PCI_DEVICE_ID_CLASSIC_8_422 0x00D1 +#define PCI_DEVICE_ID_NEO_4 0x00B0 +#define PCI_DEVICE_ID_NEO_1_422 0x00CC +#define PCI_DEVICE_ID_NEO_1_422_485 0x00CD +#define PCI_DEVICE_ID_NEO_2_422_485 0x00CE +#define PCIE_DEVICE_ID_NEO_8 0x00F0 +#define PCIE_DEVICE_ID_NEO_4 0x00F1 +#define PCIE_DEVICE_ID_NEO_4RJ45 0x00F2 +#define PCIE_DEVICE_ID_NEO_8RJ45 0x00F3 + +/* Board type definitions */ + +#define T_NEO 0000 +#define T_CLASSIC 0001 +#define T_PCIBUS 0400 + +/* Board State Definitions */ + +#define BD_RUNNING 0x0 +#define BD_REASON 0x7f +#define BD_NOTFOUND 0x1 +#define BD_NOIOPORT 0x2 +#define BD_NOMEM 0x3 +#define BD_NOBIOS 0x4 +#define BD_NOFEP 0x5 +#define BD_FAILED 0x6 +#define BD_ALLOCATED 0x7 +#define BD_TRIBOOT 0x8 +#define BD_BADKME 0x80 + + +/* 4 extra for alignment play space */ +#define WRITEBUFLEN ((4096) + 4) + +#define JSM_VERSION "jsm: 1.2-1-INKERNEL" +#define JSM_PARTNUM "40002438_A-INKERNEL" + +struct jsm_board; +struct jsm_channel; + +/************************************************************************ + * Per board operations structure * + ************************************************************************/ +struct board_ops { + irq_handler_t intr; + void (*uart_init)(struct jsm_channel *ch); + void (*uart_off)(struct jsm_channel *ch); + void (*param)(struct jsm_channel *ch); + void (*assert_modem_signals)(struct jsm_channel *ch); + void (*flush_uart_write)(struct jsm_channel *ch); + void (*flush_uart_read)(struct jsm_channel *ch); + void (*disable_receiver)(struct jsm_channel *ch); + void (*enable_receiver)(struct jsm_channel *ch); + void (*send_break)(struct jsm_channel *ch); + void (*clear_break)(struct jsm_channel *ch); + void (*send_start_character)(struct jsm_channel *ch); + void (*send_stop_character)(struct jsm_channel *ch); + void (*copy_data_from_queue_to_uart)(struct jsm_channel *ch); + u32 (*get_uart_bytes_left)(struct jsm_channel *ch); + void (*send_immediate_char)(struct jsm_channel *ch, unsigned char); +}; + + +/* + * Per-board information + */ +struct jsm_board +{ + int boardnum; /* Board number: 0-32 */ + + int type; /* Type of board */ + u8 rev; /* PCI revision ID */ + struct pci_dev *pci_dev; + u32 maxports; /* MAX ports this board can handle */ + + spinlock_t bd_intr_lock; /* Used to protect the poller tasklet and + * the interrupt routine from each other. + */ + + u32 nasync; /* Number of ports on card */ + + u32 irq; /* Interrupt request number */ + + u64 membase; /* Start of base memory of the card */ + u64 membase_end; /* End of base memory of the card */ + + u8 __iomem *re_map_membase;/* Remapped memory of the card */ + + u64 iobase; /* Start of io base of the card */ + u64 iobase_end; /* End of io base of the card */ + + u32 bd_uart_offset; /* Space between each UART */ + + struct jsm_channel *channels[MAXPORTS]; /* array of pointers to our channels. */ + + u32 bd_dividend; /* Board/UARTs specific dividend */ + + struct board_ops *bd_ops; + + struct list_head jsm_board_entry; +}; + +/************************************************************************ + * Device flag definitions for ch_flags. + ************************************************************************/ +#define CH_PRON 0x0001 /* Printer on string */ +#define CH_STOP 0x0002 /* Output is stopped */ +#define CH_STOPI 0x0004 /* Input is stopped */ +#define CH_CD 0x0008 /* Carrier is present */ +#define CH_FCAR 0x0010 /* Carrier forced on */ +#define CH_HANGUP 0x0020 /* Hangup received */ + +#define CH_RECEIVER_OFF 0x0040 /* Receiver is off */ +#define CH_OPENING 0x0080 /* Port in fragile open state */ +#define CH_CLOSING 0x0100 /* Port in fragile close state */ +#define CH_FIFO_ENABLED 0x0200 /* Port has FIFOs enabled */ +#define CH_TX_FIFO_EMPTY 0x0400 /* TX Fifo is completely empty */ +#define CH_TX_FIFO_LWM 0x0800 /* TX Fifo is below Low Water */ +#define CH_BREAK_SENDING 0x1000 /* Break is being sent */ +#define CH_LOOPBACK 0x2000 /* Channel is in lookback mode */ +#define CH_BAUD0 0x08000 /* Used for checking B0 transitions */ + +/* Our Read/Error queue sizes */ +#define RQUEUEMASK 0x1FFF /* 8 K - 1 */ +#define EQUEUEMASK 0x1FFF /* 8 K - 1 */ +#define RQUEUESIZE (RQUEUEMASK + 1) +#define EQUEUESIZE RQUEUESIZE + + +/************************************************************************ + * Channel information structure. + ************************************************************************/ +struct jsm_channel { + struct uart_port uart_port; + struct jsm_board *ch_bd; /* Board structure pointer */ + + spinlock_t ch_lock; /* provide for serialization */ + wait_queue_head_t ch_flags_wait; + + u32 ch_portnum; /* Port number, 0 offset. */ + u32 ch_open_count; /* open count */ + u32 ch_flags; /* Channel flags */ + + u64 ch_close_delay; /* How long we should drop RTS/DTR for */ + + tcflag_t ch_c_iflag; /* channel iflags */ + tcflag_t ch_c_cflag; /* channel cflags */ + tcflag_t ch_c_oflag; /* channel oflags */ + tcflag_t ch_c_lflag; /* channel lflags */ + u8 ch_stopc; /* Stop character */ + u8 ch_startc; /* Start character */ + + u8 ch_mostat; /* FEP output modem status */ + u8 ch_mistat; /* FEP input modem status */ + + /* Pointers to the "mapped" UART structs */ + struct neo_uart_struct __iomem *ch_neo_uart; /* NEO card */ + struct cls_uart_struct __iomem *ch_cls_uart; /* Classic card */ + + u8 ch_cached_lsr; /* Cached value of the LSR register */ + + u8 *ch_rqueue; /* Our read queue buffer - malloc'ed */ + u16 ch_r_head; /* Head location of the read queue */ + u16 ch_r_tail; /* Tail location of the read queue */ + + u8 *ch_equeue; /* Our error queue buffer - malloc'ed */ + u16 ch_e_head; /* Head location of the error queue */ + u16 ch_e_tail; /* Tail location of the error queue */ + + u64 ch_rxcount; /* total of data received so far */ + u64 ch_txcount; /* total of data transmitted so far */ + + u8 ch_r_tlevel; /* Receive Trigger level */ + u8 ch_t_tlevel; /* Transmit Trigger level */ + + u8 ch_r_watermark; /* Receive Watermark */ + + + u32 ch_stops_sent; /* How many times I have sent a stop character + * to try to stop the other guy sending. + */ + u64 ch_err_parity; /* Count of parity errors on channel */ + u64 ch_err_frame; /* Count of framing errors on channel */ + u64 ch_err_break; /* Count of breaks on channel */ + u64 ch_err_overrun; /* Count of overruns on channel */ + + u64 ch_xon_sends; /* Count of xons transmitted */ + u64 ch_xoff_sends; /* Count of xoffs transmitted */ +}; + +/************************************************************************ + * Per channel/port Classic UART structures * + ************************************************************************ + * Base Structure Entries Usage Meanings to Host * + * * + * W = read write R = read only * + * U = Unused. * + ************************************************************************/ + +struct cls_uart_struct { + u8 txrx; /* WR RHR/THR - Holding Reg */ + u8 ier; /* WR IER - Interrupt Enable Reg */ + u8 isr_fcr; /* WR ISR/FCR - Interrupt Status Reg/Fifo Control Reg*/ + u8 lcr; /* WR LCR - Line Control Reg */ + u8 mcr; /* WR MCR - Modem Control Reg */ + u8 lsr; /* WR LSR - Line Status Reg */ + u8 msr; /* WR MSR - Modem Status Reg */ + u8 spr; /* WR SPR - Scratch Pad Reg */ +}; + +/* Where to read the interrupt register (8bits) */ +#define UART_CLASSIC_POLL_ADDR_OFFSET 0x40 + +#define UART_EXAR654_ENHANCED_REGISTER_SET 0xBF + +#define UART_16654_FCR_TXTRIGGER_8 0x0 +#define UART_16654_FCR_TXTRIGGER_16 0x10 +#define UART_16654_FCR_TXTRIGGER_32 0x20 +#define UART_16654_FCR_TXTRIGGER_56 0x30 + +#define UART_16654_FCR_RXTRIGGER_8 0x0 +#define UART_16654_FCR_RXTRIGGER_16 0x40 +#define UART_16654_FCR_RXTRIGGER_56 0x80 +#define UART_16654_FCR_RXTRIGGER_60 0xC0 + +#define UART_IIR_CTSRTS 0x20 /* Received CTS/RTS change of state */ +#define UART_IIR_RDI_TIMEOUT 0x0C /* Receiver data TIMEOUT */ + +/* + * These are the EXTENDED definitions for the Exar 654's Interrupt + * Enable Register. + */ +#define UART_EXAR654_EFR_ECB 0x10 /* Enhanced control bit */ +#define UART_EXAR654_EFR_IXON 0x2 /* Receiver compares Xon1/Xoff1 */ +#define UART_EXAR654_EFR_IXOFF 0x8 /* Transmit Xon1/Xoff1 */ +#define UART_EXAR654_EFR_RTSDTR 0x40 /* Auto RTS/DTR Flow Control Enable */ +#define UART_EXAR654_EFR_CTSDSR 0x80 /* Auto CTS/DSR Flow COntrol Enable */ + +#define UART_EXAR654_XOFF_DETECT 0x1 /* Indicates whether chip saw an incoming XOFF char */ +#define UART_EXAR654_XON_DETECT 0x2 /* Indicates whether chip saw an incoming XON char */ + +#define UART_EXAR654_IER_XOFF 0x20 /* Xoff Interrupt Enable */ +#define UART_EXAR654_IER_RTSDTR 0x40 /* Output Interrupt Enable */ +#define UART_EXAR654_IER_CTSDSR 0x80 /* Input Interrupt Enable */ + +/************************************************************************ + * Per channel/port NEO UART structure * + ************************************************************************ + * Base Structure Entries Usage Meanings to Host * + * * + * W = read write R = read only * + * U = Unused. * + ************************************************************************/ + +struct neo_uart_struct { + u8 txrx; /* WR RHR/THR - Holding Reg */ + u8 ier; /* WR IER - Interrupt Enable Reg */ + u8 isr_fcr; /* WR ISR/FCR - Interrupt Status Reg/Fifo Control Reg */ + u8 lcr; /* WR LCR - Line Control Reg */ + u8 mcr; /* WR MCR - Modem Control Reg */ + u8 lsr; /* WR LSR - Line Status Reg */ + u8 msr; /* WR MSR - Modem Status Reg */ + u8 spr; /* WR SPR - Scratch Pad Reg */ + u8 fctr; /* WR FCTR - Feature Control Reg */ + u8 efr; /* WR EFR - Enhanced Function Reg */ + u8 tfifo; /* WR TXCNT/TXTRG - Transmit FIFO Reg */ + u8 rfifo; /* WR RXCNT/RXTRG - Receive FIFO Reg */ + u8 xoffchar1; /* WR XOFF 1 - XOff Character 1 Reg */ + u8 xoffchar2; /* WR XOFF 2 - XOff Character 2 Reg */ + u8 xonchar1; /* WR XON 1 - Xon Character 1 Reg */ + u8 xonchar2; /* WR XON 2 - XOn Character 2 Reg */ + + u8 reserved1[0x2ff - 0x200]; /* U Reserved by Exar */ + u8 txrxburst[64]; /* RW 64 bytes of RX/TX FIFO Data */ + u8 reserved2[0x37f - 0x340]; /* U Reserved by Exar */ + u8 rxburst_with_errors[64]; /* R 64 bytes of RX FIFO Data + LSR */ +}; + +/* Where to read the extended interrupt register (32bits instead of 8bits) */ +#define UART_17158_POLL_ADDR_OFFSET 0x80 + +/* + * These are the redefinitions for the FCTR on the XR17C158, since + * Exar made them different than their earlier design. (XR16C854) + */ + +/* These are only applicable when table D is selected */ +#define UART_17158_FCTR_RTS_NODELAY 0x00 +#define UART_17158_FCTR_RTS_4DELAY 0x01 +#define UART_17158_FCTR_RTS_6DELAY 0x02 +#define UART_17158_FCTR_RTS_8DELAY 0x03 +#define UART_17158_FCTR_RTS_12DELAY 0x12 +#define UART_17158_FCTR_RTS_16DELAY 0x05 +#define UART_17158_FCTR_RTS_20DELAY 0x13 +#define UART_17158_FCTR_RTS_24DELAY 0x06 +#define UART_17158_FCTR_RTS_28DELAY 0x14 +#define UART_17158_FCTR_RTS_32DELAY 0x07 +#define UART_17158_FCTR_RTS_36DELAY 0x16 +#define UART_17158_FCTR_RTS_40DELAY 0x08 +#define UART_17158_FCTR_RTS_44DELAY 0x09 +#define UART_17158_FCTR_RTS_48DELAY 0x10 +#define UART_17158_FCTR_RTS_52DELAY 0x11 + +#define UART_17158_FCTR_RTS_IRDA 0x10 +#define UART_17158_FCTR_RS485 0x20 +#define UART_17158_FCTR_TRGA 0x00 +#define UART_17158_FCTR_TRGB 0x40 +#define UART_17158_FCTR_TRGC 0x80 +#define UART_17158_FCTR_TRGD 0xC0 + +/* 17158 trigger table selects.. */ +#define UART_17158_FCTR_BIT6 0x40 +#define UART_17158_FCTR_BIT7 0x80 + +/* 17158 TX/RX memmapped buffer offsets */ +#define UART_17158_RX_FIFOSIZE 64 +#define UART_17158_TX_FIFOSIZE 64 + +/* 17158 Extended IIR's */ +#define UART_17158_IIR_RDI_TIMEOUT 0x0C /* Receiver data TIMEOUT */ +#define UART_17158_IIR_XONXOFF 0x10 /* Received an XON/XOFF char */ +#define UART_17158_IIR_HWFLOW_STATE_CHANGE 0x20 /* CTS/DSR or RTS/DTR state change */ +#define UART_17158_IIR_FIFO_ENABLED 0xC0 /* 16550 FIFOs are Enabled */ + +/* + * These are the extended interrupts that get sent + * back to us from the UART's 32bit interrupt register + */ +#define UART_17158_RX_LINE_STATUS 0x1 /* RX Ready */ +#define UART_17158_RXRDY_TIMEOUT 0x2 /* RX Ready Timeout */ +#define UART_17158_TXRDY 0x3 /* TX Ready */ +#define UART_17158_MSR 0x4 /* Modem State Change */ +#define UART_17158_TX_AND_FIFO_CLR 0x40 /* Transmitter Holding Reg Empty */ +#define UART_17158_RX_FIFO_DATA_ERROR 0x80 /* UART detected an RX FIFO Data error */ + +/* + * These are the EXTENDED definitions for the 17C158's Interrupt + * Enable Register. + */ +#define UART_17158_EFR_ECB 0x10 /* Enhanced control bit */ +#define UART_17158_EFR_IXON 0x2 /* Receiver compares Xon1/Xoff1 */ +#define UART_17158_EFR_IXOFF 0x8 /* Transmit Xon1/Xoff1 */ +#define UART_17158_EFR_RTSDTR 0x40 /* Auto RTS/DTR Flow Control Enable */ +#define UART_17158_EFR_CTSDSR 0x80 /* Auto CTS/DSR Flow COntrol Enable */ + +#define UART_17158_XOFF_DETECT 0x1 /* Indicates whether chip saw an incoming XOFF char */ +#define UART_17158_XON_DETECT 0x2 /* Indicates whether chip saw an incoming XON char */ + +#define UART_17158_IER_RSVD1 0x10 /* Reserved by Exar */ +#define UART_17158_IER_XOFF 0x20 /* Xoff Interrupt Enable */ +#define UART_17158_IER_RTSDTR 0x40 /* Output Interrupt Enable */ +#define UART_17158_IER_CTSDSR 0x80 /* Input Interrupt Enable */ + +#define PCI_DEVICE_NEO_2DB9_PCI_NAME "Neo 2 - DB9 Universal PCI" +#define PCI_DEVICE_NEO_2DB9PRI_PCI_NAME "Neo 2 - DB9 Universal PCI - Powered Ring Indicator" +#define PCI_DEVICE_NEO_2RJ45_PCI_NAME "Neo 2 - RJ45 Universal PCI" +#define PCI_DEVICE_NEO_2RJ45PRI_PCI_NAME "Neo 2 - RJ45 Universal PCI - Powered Ring Indicator" +#define PCIE_DEVICE_NEO_IBM_PCI_NAME "Neo 4 - PCI Express - IBM" + +/* + * Our Global Variables. + */ +extern struct uart_driver jsm_uart_driver; +extern struct board_ops jsm_neo_ops; +extern struct board_ops jsm_cls_ops; +extern int jsm_debug; + +/************************************************************************* + * + * Prototypes for non-static functions used in more than one module + * + *************************************************************************/ +int jsm_tty_init(struct jsm_board *); +int jsm_uart_port_init(struct jsm_board *); +int jsm_remove_uart_port(struct jsm_board *); +void jsm_input(struct jsm_channel *ch); +void jsm_check_queue_flow_control(struct jsm_channel *ch); + +#endif diff --git a/drivers/tty/serial/jsm/jsm_cls.c b/drivers/tty/serial/jsm/jsm_cls.c new file mode 100644 index 000000000..c061a7b7b --- /dev/null +++ b/drivers/tty/serial/jsm/jsm_cls.c @@ -0,0 +1,973 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2003 Digi International (www.digi.com) + * Scott H Kilau + * + * NOTE TO LINUX KERNEL HACKERS: DO NOT REFORMAT THIS CODE! + * + * This is shared code between Digi's CVS archive and the + * Linux Kernel sources. + * Changing the source just for reformatting needlessly breaks + * our CVS diff history. + * + * Send any bug fixes/changes to: Eng.Linux at digi dot com. + * Thank you. + * + */ + +#include /* For udelay */ +#include /* For read[bwl]/write[bwl] */ +#include /* For struct async_serial */ +#include /* For the various UART offsets */ +#include +#include + +#include "jsm.h" /* Driver main header file */ + +static struct { + unsigned int rate; + unsigned int cflag; +} baud_rates[] = { + { 921600, B921600 }, + { 460800, B460800 }, + { 230400, B230400 }, + { 115200, B115200 }, + { 57600, B57600 }, + { 38400, B38400 }, + { 19200, B19200 }, + { 9600, B9600 }, + { 4800, B4800 }, + { 2400, B2400 }, + { 1200, B1200 }, + { 600, B600 }, + { 300, B300 }, + { 200, B200 }, + { 150, B150 }, + { 134, B134 }, + { 110, B110 }, + { 75, B75 }, + { 50, B50 }, +}; + +static void cls_set_cts_flow_control(struct jsm_channel *ch) +{ + u8 lcrb = readb(&ch->ch_cls_uart->lcr); + u8 ier = readb(&ch->ch_cls_uart->ier); + u8 isr_fcr = 0; + + /* + * The Enhanced Register Set may only be accessed when + * the Line Control Register is set to 0xBFh. + */ + writeb(UART_EXAR654_ENHANCED_REGISTER_SET, &ch->ch_cls_uart->lcr); + + isr_fcr = readb(&ch->ch_cls_uart->isr_fcr); + + /* Turn on CTS flow control, turn off IXON flow control */ + isr_fcr |= (UART_EXAR654_EFR_ECB | UART_EXAR654_EFR_CTSDSR); + isr_fcr &= ~(UART_EXAR654_EFR_IXON); + + writeb(isr_fcr, &ch->ch_cls_uart->isr_fcr); + + /* Write old LCR value back out, which turns enhanced access off */ + writeb(lcrb, &ch->ch_cls_uart->lcr); + + /* + * Enable interrupts for CTS flow, turn off interrupts for + * received XOFF chars + */ + ier |= (UART_EXAR654_IER_CTSDSR); + ier &= ~(UART_EXAR654_IER_XOFF); + writeb(ier, &ch->ch_cls_uart->ier); + + /* Set the usual FIFO values */ + writeb((UART_FCR_ENABLE_FIFO), &ch->ch_cls_uart->isr_fcr); + + writeb((UART_FCR_ENABLE_FIFO | UART_16654_FCR_RXTRIGGER_56 | + UART_16654_FCR_TXTRIGGER_16 | UART_FCR_CLEAR_RCVR), + &ch->ch_cls_uart->isr_fcr); + + ch->ch_t_tlevel = 16; +} + +static void cls_set_ixon_flow_control(struct jsm_channel *ch) +{ + u8 lcrb = readb(&ch->ch_cls_uart->lcr); + u8 ier = readb(&ch->ch_cls_uart->ier); + u8 isr_fcr = 0; + + /* + * The Enhanced Register Set may only be accessed when + * the Line Control Register is set to 0xBFh. + */ + writeb(UART_EXAR654_ENHANCED_REGISTER_SET, &ch->ch_cls_uart->lcr); + + isr_fcr = readb(&ch->ch_cls_uart->isr_fcr); + + /* Turn on IXON flow control, turn off CTS flow control */ + isr_fcr |= (UART_EXAR654_EFR_ECB | UART_EXAR654_EFR_IXON); + isr_fcr &= ~(UART_EXAR654_EFR_CTSDSR); + + writeb(isr_fcr, &ch->ch_cls_uart->isr_fcr); + + /* Now set our current start/stop chars while in enhanced mode */ + writeb(ch->ch_startc, &ch->ch_cls_uart->mcr); + writeb(0, &ch->ch_cls_uart->lsr); + writeb(ch->ch_stopc, &ch->ch_cls_uart->msr); + writeb(0, &ch->ch_cls_uart->spr); + + /* Write old LCR value back out, which turns enhanced access off */ + writeb(lcrb, &ch->ch_cls_uart->lcr); + + /* + * Disable interrupts for CTS flow, turn on interrupts for + * received XOFF chars + */ + ier &= ~(UART_EXAR654_IER_CTSDSR); + ier |= (UART_EXAR654_IER_XOFF); + writeb(ier, &ch->ch_cls_uart->ier); + + /* Set the usual FIFO values */ + writeb((UART_FCR_ENABLE_FIFO), &ch->ch_cls_uart->isr_fcr); + + writeb((UART_FCR_ENABLE_FIFO | UART_16654_FCR_RXTRIGGER_16 | + UART_16654_FCR_TXTRIGGER_16 | UART_FCR_CLEAR_RCVR), + &ch->ch_cls_uart->isr_fcr); +} + +static void cls_set_no_output_flow_control(struct jsm_channel *ch) +{ + u8 lcrb = readb(&ch->ch_cls_uart->lcr); + u8 ier = readb(&ch->ch_cls_uart->ier); + u8 isr_fcr = 0; + + /* + * The Enhanced Register Set may only be accessed when + * the Line Control Register is set to 0xBFh. + */ + writeb(UART_EXAR654_ENHANCED_REGISTER_SET, &ch->ch_cls_uart->lcr); + + isr_fcr = readb(&ch->ch_cls_uart->isr_fcr); + + /* Turn off IXON flow control, turn off CTS flow control */ + isr_fcr |= (UART_EXAR654_EFR_ECB); + isr_fcr &= ~(UART_EXAR654_EFR_CTSDSR | UART_EXAR654_EFR_IXON); + + writeb(isr_fcr, &ch->ch_cls_uart->isr_fcr); + + /* Write old LCR value back out, which turns enhanced access off */ + writeb(lcrb, &ch->ch_cls_uart->lcr); + + /* + * Disable interrupts for CTS flow, turn off interrupts for + * received XOFF chars + */ + ier &= ~(UART_EXAR654_IER_CTSDSR); + ier &= ~(UART_EXAR654_IER_XOFF); + writeb(ier, &ch->ch_cls_uart->ier); + + /* Set the usual FIFO values */ + writeb((UART_FCR_ENABLE_FIFO), &ch->ch_cls_uart->isr_fcr); + + writeb((UART_FCR_ENABLE_FIFO | UART_16654_FCR_RXTRIGGER_16 | + UART_16654_FCR_TXTRIGGER_16 | UART_FCR_CLEAR_RCVR), + &ch->ch_cls_uart->isr_fcr); + + ch->ch_r_watermark = 0; + ch->ch_t_tlevel = 16; + ch->ch_r_tlevel = 16; +} + +static void cls_set_rts_flow_control(struct jsm_channel *ch) +{ + u8 lcrb = readb(&ch->ch_cls_uart->lcr); + u8 ier = readb(&ch->ch_cls_uart->ier); + u8 isr_fcr = 0; + + /* + * The Enhanced Register Set may only be accessed when + * the Line Control Register is set to 0xBFh. + */ + writeb(UART_EXAR654_ENHANCED_REGISTER_SET, &ch->ch_cls_uart->lcr); + + isr_fcr = readb(&ch->ch_cls_uart->isr_fcr); + + /* Turn on RTS flow control, turn off IXOFF flow control */ + isr_fcr |= (UART_EXAR654_EFR_ECB | UART_EXAR654_EFR_RTSDTR); + isr_fcr &= ~(UART_EXAR654_EFR_IXOFF); + + writeb(isr_fcr, &ch->ch_cls_uart->isr_fcr); + + /* Write old LCR value back out, which turns enhanced access off */ + writeb(lcrb, &ch->ch_cls_uart->lcr); + + /* Enable interrupts for RTS flow */ + ier |= (UART_EXAR654_IER_RTSDTR); + writeb(ier, &ch->ch_cls_uart->ier); + + /* Set the usual FIFO values */ + writeb((UART_FCR_ENABLE_FIFO), &ch->ch_cls_uart->isr_fcr); + + writeb((UART_FCR_ENABLE_FIFO | UART_16654_FCR_RXTRIGGER_56 | + UART_16654_FCR_TXTRIGGER_16 | UART_FCR_CLEAR_RCVR), + &ch->ch_cls_uart->isr_fcr); + + ch->ch_r_watermark = 4; + ch->ch_r_tlevel = 8; +} + +static void cls_set_ixoff_flow_control(struct jsm_channel *ch) +{ + u8 lcrb = readb(&ch->ch_cls_uart->lcr); + u8 ier = readb(&ch->ch_cls_uart->ier); + u8 isr_fcr = 0; + + /* + * The Enhanced Register Set may only be accessed when + * the Line Control Register is set to 0xBFh. + */ + writeb(UART_EXAR654_ENHANCED_REGISTER_SET, &ch->ch_cls_uart->lcr); + + isr_fcr = readb(&ch->ch_cls_uart->isr_fcr); + + /* Turn on IXOFF flow control, turn off RTS flow control */ + isr_fcr |= (UART_EXAR654_EFR_ECB | UART_EXAR654_EFR_IXOFF); + isr_fcr &= ~(UART_EXAR654_EFR_RTSDTR); + + writeb(isr_fcr, &ch->ch_cls_uart->isr_fcr); + + /* Now set our current start/stop chars while in enhanced mode */ + writeb(ch->ch_startc, &ch->ch_cls_uart->mcr); + writeb(0, &ch->ch_cls_uart->lsr); + writeb(ch->ch_stopc, &ch->ch_cls_uart->msr); + writeb(0, &ch->ch_cls_uart->spr); + + /* Write old LCR value back out, which turns enhanced access off */ + writeb(lcrb, &ch->ch_cls_uart->lcr); + + /* Disable interrupts for RTS flow */ + ier &= ~(UART_EXAR654_IER_RTSDTR); + writeb(ier, &ch->ch_cls_uart->ier); + + /* Set the usual FIFO values */ + writeb((UART_FCR_ENABLE_FIFO), &ch->ch_cls_uart->isr_fcr); + + writeb((UART_FCR_ENABLE_FIFO | UART_16654_FCR_RXTRIGGER_16 | + UART_16654_FCR_TXTRIGGER_16 | UART_FCR_CLEAR_RCVR), + &ch->ch_cls_uart->isr_fcr); +} + +static void cls_set_no_input_flow_control(struct jsm_channel *ch) +{ + u8 lcrb = readb(&ch->ch_cls_uart->lcr); + u8 ier = readb(&ch->ch_cls_uart->ier); + u8 isr_fcr = 0; + + /* + * The Enhanced Register Set may only be accessed when + * the Line Control Register is set to 0xBFh. + */ + writeb(UART_EXAR654_ENHANCED_REGISTER_SET, &ch->ch_cls_uart->lcr); + + isr_fcr = readb(&ch->ch_cls_uart->isr_fcr); + + /* Turn off IXOFF flow control, turn off RTS flow control */ + isr_fcr |= (UART_EXAR654_EFR_ECB); + isr_fcr &= ~(UART_EXAR654_EFR_RTSDTR | UART_EXAR654_EFR_IXOFF); + + writeb(isr_fcr, &ch->ch_cls_uart->isr_fcr); + + /* Write old LCR value back out, which turns enhanced access off */ + writeb(lcrb, &ch->ch_cls_uart->lcr); + + /* Disable interrupts for RTS flow */ + ier &= ~(UART_EXAR654_IER_RTSDTR); + writeb(ier, &ch->ch_cls_uart->ier); + + /* Set the usual FIFO values */ + writeb((UART_FCR_ENABLE_FIFO), &ch->ch_cls_uart->isr_fcr); + + writeb((UART_FCR_ENABLE_FIFO | UART_16654_FCR_RXTRIGGER_16 | + UART_16654_FCR_TXTRIGGER_16 | UART_FCR_CLEAR_RCVR), + &ch->ch_cls_uart->isr_fcr); + + ch->ch_t_tlevel = 16; + ch->ch_r_tlevel = 16; +} + +/* + * cls_clear_break. + * Determines whether its time to shut off break condition. + * + * No locks are assumed to be held when calling this function. + * channel lock is held and released in this function. + */ +static void cls_clear_break(struct jsm_channel *ch) +{ + unsigned long lock_flags; + + spin_lock_irqsave(&ch->ch_lock, lock_flags); + + /* Turn break off, and unset some variables */ + if (ch->ch_flags & CH_BREAK_SENDING) { + u8 temp = readb(&ch->ch_cls_uart->lcr); + + writeb((temp & ~UART_LCR_SBC), &ch->ch_cls_uart->lcr); + + ch->ch_flags &= ~(CH_BREAK_SENDING); + jsm_dbg(IOCTL, &ch->ch_bd->pci_dev, + "clear break Finishing UART_LCR_SBC! finished: %lx\n", + jiffies); + } + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); +} + +static void cls_disable_receiver(struct jsm_channel *ch) +{ + u8 tmp = readb(&ch->ch_cls_uart->ier); + + tmp &= ~(UART_IER_RDI); + writeb(tmp, &ch->ch_cls_uart->ier); +} + +static void cls_enable_receiver(struct jsm_channel *ch) +{ + u8 tmp = readb(&ch->ch_cls_uart->ier); + + tmp |= (UART_IER_RDI); + writeb(tmp, &ch->ch_cls_uart->ier); +} + +/* Make the UART raise any of the output signals we want up */ +static void cls_assert_modem_signals(struct jsm_channel *ch) +{ + if (!ch) + return; + + writeb(ch->ch_mostat, &ch->ch_cls_uart->mcr); +} + +static void cls_copy_data_from_uart_to_queue(struct jsm_channel *ch) +{ + int qleft = 0; + u8 linestatus = 0; + u8 error_mask = 0; + u16 head; + u16 tail; + unsigned long flags; + + if (!ch) + return; + + spin_lock_irqsave(&ch->ch_lock, flags); + + /* cache head and tail of queue */ + head = ch->ch_r_head & RQUEUEMASK; + tail = ch->ch_r_tail & RQUEUEMASK; + + /* Get our cached LSR */ + linestatus = ch->ch_cached_lsr; + ch->ch_cached_lsr = 0; + + /* Store how much space we have left in the queue */ + qleft = tail - head - 1; + if (qleft < 0) + qleft += RQUEUEMASK + 1; + + /* + * Create a mask to determine whether we should + * insert the character (if any) into our queue. + */ + if (ch->ch_c_iflag & IGNBRK) + error_mask |= UART_LSR_BI; + + while (1) { + /* + * Grab the linestatus register, we need to + * check to see if there is any data to read + */ + linestatus = readb(&ch->ch_cls_uart->lsr); + + /* Break out if there is no data to fetch */ + if (!(linestatus & UART_LSR_DR)) + break; + + /* + * Discard character if we are ignoring the error mask + * which in this case is the break signal. + */ + if (linestatus & error_mask) { + u8 discard; + + linestatus = 0; + discard = readb(&ch->ch_cls_uart->txrx); + continue; + } + + /* + * If our queue is full, we have no choice but to drop some + * data. The assumption is that HWFLOW or SWFLOW should have + * stopped things way way before we got to this point. + * + * I decided that I wanted to ditch the oldest data first, + * I hope thats okay with everyone? Yes? Good. + */ + while (qleft < 1) { + tail = (tail + 1) & RQUEUEMASK; + ch->ch_r_tail = tail; + ch->ch_err_overrun++; + qleft++; + } + + ch->ch_equeue[head] = linestatus & (UART_LSR_BI | UART_LSR_PE + | UART_LSR_FE); + ch->ch_rqueue[head] = readb(&ch->ch_cls_uart->txrx); + + qleft--; + + if (ch->ch_equeue[head] & UART_LSR_PE) + ch->ch_err_parity++; + if (ch->ch_equeue[head] & UART_LSR_BI) + ch->ch_err_break++; + if (ch->ch_equeue[head] & UART_LSR_FE) + ch->ch_err_frame++; + + /* Add to, and flip head if needed */ + head = (head + 1) & RQUEUEMASK; + ch->ch_rxcount++; + } + + /* + * Write new final heads to channel structure. + */ + ch->ch_r_head = head & RQUEUEMASK; + ch->ch_e_head = head & EQUEUEMASK; + + spin_unlock_irqrestore(&ch->ch_lock, flags); +} + +static void cls_copy_data_from_queue_to_uart(struct jsm_channel *ch) +{ + u16 tail; + int n; + int qlen; + u32 len_written = 0; + struct circ_buf *circ; + + if (!ch) + return; + + circ = &ch->uart_port.state->xmit; + + /* No data to write to the UART */ + if (uart_circ_empty(circ)) + return; + + /* If port is "stopped", don't send any data to the UART */ + if ((ch->ch_flags & CH_STOP) || (ch->ch_flags & CH_BREAK_SENDING)) + return; + + /* We have to do it this way, because of the EXAR TXFIFO count bug. */ + if (!(ch->ch_flags & (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM))) + return; + + n = 32; + + /* cache tail of queue */ + tail = circ->tail & (UART_XMIT_SIZE - 1); + qlen = uart_circ_chars_pending(circ); + + /* Find minimum of the FIFO space, versus queue length */ + n = min(n, qlen); + + while (n > 0) { + writeb(circ->buf[tail], &ch->ch_cls_uart->txrx); + tail = (tail + 1) & (UART_XMIT_SIZE - 1); + n--; + ch->ch_txcount++; + len_written++; + } + + /* Update the final tail */ + circ->tail = tail & (UART_XMIT_SIZE - 1); + + if (len_written > ch->ch_t_tlevel) + ch->ch_flags &= ~(CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); + + if (uart_circ_empty(circ)) + uart_write_wakeup(&ch->uart_port); +} + +static void cls_parse_modem(struct jsm_channel *ch, u8 signals) +{ + u8 msignals = signals; + + jsm_dbg(MSIGS, &ch->ch_bd->pci_dev, + "neo_parse_modem: port: %d msignals: %x\n", + ch->ch_portnum, msignals); + + /* + * Scrub off lower bits. + * They signify delta's, which I don't care about + * Keep DDCD and DDSR though + */ + msignals &= 0xf8; + + if (msignals & UART_MSR_DDCD) + uart_handle_dcd_change(&ch->uart_port, msignals & UART_MSR_DCD); + if (msignals & UART_MSR_DDSR) + uart_handle_dcd_change(&ch->uart_port, msignals & UART_MSR_CTS); + + if (msignals & UART_MSR_DCD) + ch->ch_mistat |= UART_MSR_DCD; + else + ch->ch_mistat &= ~UART_MSR_DCD; + + if (msignals & UART_MSR_DSR) + ch->ch_mistat |= UART_MSR_DSR; + else + ch->ch_mistat &= ~UART_MSR_DSR; + + if (msignals & UART_MSR_RI) + ch->ch_mistat |= UART_MSR_RI; + else + ch->ch_mistat &= ~UART_MSR_RI; + + if (msignals & UART_MSR_CTS) + ch->ch_mistat |= UART_MSR_CTS; + else + ch->ch_mistat &= ~UART_MSR_CTS; + + jsm_dbg(MSIGS, &ch->ch_bd->pci_dev, + "Port: %d DTR: %d RTS: %d CTS: %d DSR: %d " "RI: %d CD: %d\n", + ch->ch_portnum, + !!((ch->ch_mistat | ch->ch_mostat) & UART_MCR_DTR), + !!((ch->ch_mistat | ch->ch_mostat) & UART_MCR_RTS), + !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_CTS), + !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_DSR), + !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_RI), + !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_DCD)); +} + +/* Parse the ISR register for the specific port */ +static inline void cls_parse_isr(struct jsm_board *brd, uint port) +{ + struct jsm_channel *ch; + u8 isr = 0; + unsigned long flags; + + /* + * No need to verify board pointer, it was already + * verified in the interrupt routine. + */ + + if (port >= brd->nasync) + return; + + ch = brd->channels[port]; + if (!ch) + return; + + /* Here we try to figure out what caused the interrupt to happen */ + while (1) { + isr = readb(&ch->ch_cls_uart->isr_fcr); + + /* Bail if no pending interrupt on port */ + if (isr & UART_IIR_NO_INT) + break; + + /* Receive Interrupt pending */ + if (isr & (UART_IIR_RDI | UART_IIR_RDI_TIMEOUT)) { + /* Read data from uart -> queue */ + cls_copy_data_from_uart_to_queue(ch); + jsm_check_queue_flow_control(ch); + } + + /* Transmit Hold register empty pending */ + if (isr & UART_IIR_THRI) { + /* Transfer data (if any) from Write Queue -> UART. */ + spin_lock_irqsave(&ch->ch_lock, flags); + ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); + spin_unlock_irqrestore(&ch->ch_lock, flags); + cls_copy_data_from_queue_to_uart(ch); + } + + /* + * CTS/RTS change of state: + * Don't need to do anything, the cls_parse_modem + * below will grab the updated modem signals. + */ + + /* Parse any modem signal changes */ + cls_parse_modem(ch, readb(&ch->ch_cls_uart->msr)); + } +} + +/* Channel lock MUST be held before calling this function! */ +static void cls_flush_uart_write(struct jsm_channel *ch) +{ + u8 tmp = 0; + u8 i = 0; + + if (!ch) + return; + + writeb((UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_XMIT), + &ch->ch_cls_uart->isr_fcr); + + for (i = 0; i < 10; i++) { + /* Check to see if the UART feels it completely flushed FIFO */ + tmp = readb(&ch->ch_cls_uart->isr_fcr); + if (tmp & UART_FCR_CLEAR_XMIT) { + jsm_dbg(IOCTL, &ch->ch_bd->pci_dev, + "Still flushing TX UART... i: %d\n", i); + udelay(10); + } else + break; + } + + ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); +} + +/* Channel lock MUST be held before calling this function! */ +static void cls_flush_uart_read(struct jsm_channel *ch) +{ + if (!ch) + return; + + /* + * For complete POSIX compatibility, we should be purging the + * read FIFO in the UART here. + * + * However, clearing the read FIFO (UART_FCR_CLEAR_RCVR) also + * incorrectly flushes write data as well as just basically trashing the + * FIFO. + * + * Presumably, this is a bug in this UART. + */ + + udelay(10); +} + +static void cls_send_start_character(struct jsm_channel *ch) +{ + if (!ch) + return; + + if (ch->ch_startc != __DISABLED_CHAR) { + ch->ch_xon_sends++; + writeb(ch->ch_startc, &ch->ch_cls_uart->txrx); + } +} + +static void cls_send_stop_character(struct jsm_channel *ch) +{ + if (!ch) + return; + + if (ch->ch_stopc != __DISABLED_CHAR) { + ch->ch_xoff_sends++; + writeb(ch->ch_stopc, &ch->ch_cls_uart->txrx); + } +} + +/* + * cls_param() + * Send any/all changes to the line to the UART. + */ +static void cls_param(struct jsm_channel *ch) +{ + u8 lcr = 0; + u8 uart_lcr = 0; + u8 ier = 0; + u32 baud = 9600; + int quot = 0; + struct jsm_board *bd; + int i; + unsigned int cflag; + + bd = ch->ch_bd; + if (!bd) + return; + + /* + * If baud rate is zero, flush queues, and set mval to drop DTR. + */ + if ((ch->ch_c_cflag & (CBAUD)) == 0) { + ch->ch_r_head = 0; + ch->ch_r_tail = 0; + ch->ch_e_head = 0; + ch->ch_e_tail = 0; + + cls_flush_uart_write(ch); + cls_flush_uart_read(ch); + + /* The baudrate is B0 so all modem lines are to be dropped. */ + ch->ch_flags |= (CH_BAUD0); + ch->ch_mostat &= ~(UART_MCR_RTS | UART_MCR_DTR); + cls_assert_modem_signals(ch); + return; + } + + cflag = C_BAUD(ch->uart_port.state->port.tty); + baud = 9600; + for (i = 0; i < ARRAY_SIZE(baud_rates); i++) { + if (baud_rates[i].cflag == cflag) { + baud = baud_rates[i].rate; + break; + } + } + + if (ch->ch_flags & CH_BAUD0) + ch->ch_flags &= ~(CH_BAUD0); + + if (ch->ch_c_cflag & PARENB) + lcr |= UART_LCR_PARITY; + + if (!(ch->ch_c_cflag & PARODD)) + lcr |= UART_LCR_EPAR; + + /* + * Not all platforms support mark/space parity, + * so this will hide behind an ifdef. + */ +#ifdef CMSPAR + if (ch->ch_c_cflag & CMSPAR) + lcr |= UART_LCR_SPAR; +#endif + + if (ch->ch_c_cflag & CSTOPB) + lcr |= UART_LCR_STOP; + + switch (ch->ch_c_cflag & CSIZE) { + case CS5: + lcr |= UART_LCR_WLEN5; + break; + case CS6: + lcr |= UART_LCR_WLEN6; + break; + case CS7: + lcr |= UART_LCR_WLEN7; + break; + case CS8: + default: + lcr |= UART_LCR_WLEN8; + break; + } + + ier = readb(&ch->ch_cls_uart->ier); + uart_lcr = readb(&ch->ch_cls_uart->lcr); + + quot = ch->ch_bd->bd_dividend / baud; + + if (quot != 0) { + writeb(UART_LCR_DLAB, &ch->ch_cls_uart->lcr); + writeb((quot & 0xff), &ch->ch_cls_uart->txrx); + writeb((quot >> 8), &ch->ch_cls_uart->ier); + writeb(lcr, &ch->ch_cls_uart->lcr); + } + + if (uart_lcr != lcr) + writeb(lcr, &ch->ch_cls_uart->lcr); + + if (ch->ch_c_cflag & CREAD) + ier |= (UART_IER_RDI | UART_IER_RLSI); + + ier |= (UART_IER_THRI | UART_IER_MSI); + + writeb(ier, &ch->ch_cls_uart->ier); + + if (ch->ch_c_cflag & CRTSCTS) + cls_set_cts_flow_control(ch); + else if (ch->ch_c_iflag & IXON) { + /* + * If start/stop is set to disable, + * then we should disable flow control. + */ + if ((ch->ch_startc == __DISABLED_CHAR) || + (ch->ch_stopc == __DISABLED_CHAR)) + cls_set_no_output_flow_control(ch); + else + cls_set_ixon_flow_control(ch); + } else + cls_set_no_output_flow_control(ch); + + if (ch->ch_c_cflag & CRTSCTS) + cls_set_rts_flow_control(ch); + else if (ch->ch_c_iflag & IXOFF) { + /* + * If start/stop is set to disable, + * then we should disable flow control. + */ + if ((ch->ch_startc == __DISABLED_CHAR) || + (ch->ch_stopc == __DISABLED_CHAR)) + cls_set_no_input_flow_control(ch); + else + cls_set_ixoff_flow_control(ch); + } else + cls_set_no_input_flow_control(ch); + + cls_assert_modem_signals(ch); + + /* get current status of the modem signals now */ + cls_parse_modem(ch, readb(&ch->ch_cls_uart->msr)); +} + +/* + * cls_intr() + * + * Classic specific interrupt handler. + */ +static irqreturn_t cls_intr(int irq, void *voidbrd) +{ + struct jsm_board *brd = voidbrd; + unsigned long lock_flags; + unsigned char uart_poll; + uint i = 0; + + /* Lock out the slow poller from running on this board. */ + spin_lock_irqsave(&brd->bd_intr_lock, lock_flags); + + /* + * Check the board's global interrupt offset to see if we + * acctually do have an interrupt pending on us. + */ + uart_poll = readb(brd->re_map_membase + UART_CLASSIC_POLL_ADDR_OFFSET); + + jsm_dbg(INTR, &brd->pci_dev, "%s:%d uart_poll: %x\n", + __FILE__, __LINE__, uart_poll); + + if (!uart_poll) { + jsm_dbg(INTR, &brd->pci_dev, + "Kernel interrupted to me, but no pending interrupts...\n"); + spin_unlock_irqrestore(&brd->bd_intr_lock, lock_flags); + return IRQ_NONE; + } + + /* At this point, we have at least SOMETHING to service, dig further. */ + + /* Parse each port to find out what caused the interrupt */ + for (i = 0; i < brd->nasync; i++) + cls_parse_isr(brd, i); + + spin_unlock_irqrestore(&brd->bd_intr_lock, lock_flags); + + return IRQ_HANDLED; +} + +/* Inits UART */ +static void cls_uart_init(struct jsm_channel *ch) +{ + unsigned char lcrb = readb(&ch->ch_cls_uart->lcr); + unsigned char isr_fcr = 0; + + writeb(0, &ch->ch_cls_uart->ier); + + /* + * The Enhanced Register Set may only be accessed when + * the Line Control Register is set to 0xBFh. + */ + writeb(UART_EXAR654_ENHANCED_REGISTER_SET, &ch->ch_cls_uart->lcr); + + isr_fcr = readb(&ch->ch_cls_uart->isr_fcr); + + /* Turn on Enhanced/Extended controls */ + isr_fcr |= (UART_EXAR654_EFR_ECB); + + writeb(isr_fcr, &ch->ch_cls_uart->isr_fcr); + + /* Write old LCR value back out, which turns enhanced access off */ + writeb(lcrb, &ch->ch_cls_uart->lcr); + + /* Clear out UART and FIFO */ + readb(&ch->ch_cls_uart->txrx); + + writeb((UART_FCR_ENABLE_FIFO|UART_FCR_CLEAR_RCVR|UART_FCR_CLEAR_XMIT), + &ch->ch_cls_uart->isr_fcr); + udelay(10); + + ch->ch_flags |= (CH_FIFO_ENABLED | CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); + + readb(&ch->ch_cls_uart->lsr); + readb(&ch->ch_cls_uart->msr); +} + +/* + * Turns off UART. + */ +static void cls_uart_off(struct jsm_channel *ch) +{ + /* Stop all interrupts from accurring. */ + writeb(0, &ch->ch_cls_uart->ier); +} + +/* + * cls_get_uarts_bytes_left. + * Returns 0 is nothing left in the FIFO, returns 1 otherwise. + * + * The channel lock MUST be held by the calling function. + */ +static u32 cls_get_uart_bytes_left(struct jsm_channel *ch) +{ + u8 left = 0; + u8 lsr = readb(&ch->ch_cls_uart->lsr); + + /* Determine whether the Transmitter is empty or not */ + if (!(lsr & UART_LSR_TEMT)) + left = 1; + else { + ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); + left = 0; + } + + return left; +} + +/* + * cls_send_break. + * Starts sending a break thru the UART. + * + * The channel lock MUST be held by the calling function. + */ +static void cls_send_break(struct jsm_channel *ch) +{ + /* Tell the UART to start sending the break */ + if (!(ch->ch_flags & CH_BREAK_SENDING)) { + u8 temp = readb(&ch->ch_cls_uart->lcr); + + writeb((temp | UART_LCR_SBC), &ch->ch_cls_uart->lcr); + ch->ch_flags |= (CH_BREAK_SENDING); + } +} + +/* + * cls_send_immediate_char. + * Sends a specific character as soon as possible to the UART, + * jumping over any bytes that might be in the write queue. + * + * The channel lock MUST be held by the calling function. + */ +static void cls_send_immediate_char(struct jsm_channel *ch, unsigned char c) +{ + writeb(c, &ch->ch_cls_uart->txrx); +} + +struct board_ops jsm_cls_ops = { + .intr = cls_intr, + .uart_init = cls_uart_init, + .uart_off = cls_uart_off, + .param = cls_param, + .assert_modem_signals = cls_assert_modem_signals, + .flush_uart_write = cls_flush_uart_write, + .flush_uart_read = cls_flush_uart_read, + .disable_receiver = cls_disable_receiver, + .enable_receiver = cls_enable_receiver, + .send_break = cls_send_break, + .clear_break = cls_clear_break, + .send_start_character = cls_send_start_character, + .send_stop_character = cls_send_stop_character, + .copy_data_from_queue_to_uart = cls_copy_data_from_queue_to_uart, + .get_uart_bytes_left = cls_get_uart_bytes_left, + .send_immediate_char = cls_send_immediate_char +}; + diff --git a/drivers/tty/serial/jsm/jsm_driver.c b/drivers/tty/serial/jsm/jsm_driver.c new file mode 100644 index 000000000..b5b61e598 --- /dev/null +++ b/drivers/tty/serial/jsm/jsm_driver.c @@ -0,0 +1,384 @@ +// SPDX-License-Identifier: GPL-2.0+ +/************************************************************************ + * Copyright 2003 Digi International (www.digi.com) + * + * Copyright (C) 2004 IBM Corporation. All rights reserved. + * + * Contact Information: + * Scott H Kilau + * Wendy Xiong + * + * + ***********************************************************************/ +#include +#include +#include + +#include "jsm.h" + +MODULE_AUTHOR("Digi International, https://www.digi.com"); +MODULE_DESCRIPTION("Driver for the Digi International Neo and Classic PCI based product line"); +MODULE_LICENSE("GPL"); +MODULE_SUPPORTED_DEVICE("jsm"); + +#define JSM_DRIVER_NAME "jsm" +#define NR_PORTS 32 +#define JSM_MINOR_START 0 + +struct uart_driver jsm_uart_driver = { + .owner = THIS_MODULE, + .driver_name = JSM_DRIVER_NAME, + .dev_name = "ttyn", + .major = 0, + .minor = JSM_MINOR_START, + .nr = NR_PORTS, +}; + +static pci_ers_result_t jsm_io_error_detected(struct pci_dev *pdev, + pci_channel_state_t state); +static pci_ers_result_t jsm_io_slot_reset(struct pci_dev *pdev); +static void jsm_io_resume(struct pci_dev *pdev); + +static const struct pci_error_handlers jsm_err_handler = { + .error_detected = jsm_io_error_detected, + .slot_reset = jsm_io_slot_reset, + .resume = jsm_io_resume, +}; + +int jsm_debug; +module_param(jsm_debug, int, 0); +MODULE_PARM_DESC(jsm_debug, "Driver debugging level"); + +static int jsm_probe_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + int rc = 0; + struct jsm_board *brd; + static int adapter_count; + + rc = pci_enable_device(pdev); + if (rc) { + dev_err(&pdev->dev, "Device enable FAILED\n"); + goto out; + } + + rc = pci_request_regions(pdev, JSM_DRIVER_NAME); + if (rc) { + dev_err(&pdev->dev, "pci_request_region FAILED\n"); + goto out_disable_device; + } + + brd = kzalloc(sizeof(*brd), GFP_KERNEL); + if (!brd) { + rc = -ENOMEM; + goto out_release_regions; + } + + /* store the info for the board we've found */ + brd->boardnum = adapter_count++; + brd->pci_dev = pdev; + + switch (pdev->device) { + case PCI_DEVICE_ID_NEO_2DB9: + case PCI_DEVICE_ID_NEO_2DB9PRI: + case PCI_DEVICE_ID_NEO_2RJ45: + case PCI_DEVICE_ID_NEO_2RJ45PRI: + case PCI_DEVICE_ID_NEO_2_422_485: + brd->maxports = 2; + break; + + case PCI_DEVICE_ID_CLASSIC_4: + case PCI_DEVICE_ID_CLASSIC_4_422: + case PCI_DEVICE_ID_NEO_4: + case PCIE_DEVICE_ID_NEO_4: + case PCIE_DEVICE_ID_NEO_4RJ45: + case PCIE_DEVICE_ID_NEO_4_IBM: + brd->maxports = 4; + break; + + case PCI_DEVICE_ID_CLASSIC_8: + case PCI_DEVICE_ID_CLASSIC_8_422: + case PCI_DEVICE_ID_DIGI_NEO_8: + case PCIE_DEVICE_ID_NEO_8: + case PCIE_DEVICE_ID_NEO_8RJ45: + brd->maxports = 8; + break; + + default: + brd->maxports = 1; + break; + } + + spin_lock_init(&brd->bd_intr_lock); + + /* store which revision we have */ + brd->rev = pdev->revision; + + brd->irq = pdev->irq; + + switch (pdev->device) { + case PCI_DEVICE_ID_CLASSIC_4: + case PCI_DEVICE_ID_CLASSIC_4_422: + case PCI_DEVICE_ID_CLASSIC_8: + case PCI_DEVICE_ID_CLASSIC_8_422: + + jsm_dbg(INIT, &brd->pci_dev, + "jsm_found_board - Classic adapter\n"); + + /* + * For PCI ClassicBoards + * PCI Local Address (.i.e. "resource" number) space + * 0 PLX Memory Mapped Config + * 1 PLX I/O Mapped Config + * 2 I/O Mapped UARTs and Status + * 3 Memory Mapped VPD + * 4 Memory Mapped UARTs and Status + */ + + /* Get the PCI Base Address Registers */ + brd->membase = pci_resource_start(pdev, 4); + brd->membase_end = pci_resource_end(pdev, 4); + + if (brd->membase & 0x1) + brd->membase &= ~0x3; + else + brd->membase &= ~0xF; + + brd->iobase = pci_resource_start(pdev, 1); + brd->iobase_end = pci_resource_end(pdev, 1); + brd->iobase = ((unsigned int)(brd->iobase)) & 0xFFFE; + + /* Assign the board_ops struct */ + brd->bd_ops = &jsm_cls_ops; + + brd->bd_uart_offset = 0x8; + brd->bd_dividend = 921600; + + brd->re_map_membase = ioremap(brd->membase, + pci_resource_len(pdev, 4)); + if (!brd->re_map_membase) { + dev_err(&pdev->dev, + "Card has no PCI Memory resources, failing board.\n"); + rc = -ENOMEM; + goto out_kfree_brd; + } + + /* + * Enable Local Interrupt 1 (0x1), + * Local Interrupt 1 Polarity Active high (0x2), + * Enable PCI interrupt (0x43) + */ + outb(0x43, brd->iobase + 0x4c); + + break; + + case PCI_DEVICE_ID_NEO_2DB9: + case PCI_DEVICE_ID_NEO_2DB9PRI: + case PCI_DEVICE_ID_NEO_2RJ45: + case PCI_DEVICE_ID_NEO_2RJ45PRI: + case PCI_DEVICE_ID_NEO_2_422_485: + case PCI_DEVICE_ID_NEO_4: + case PCIE_DEVICE_ID_NEO_4: + case PCIE_DEVICE_ID_NEO_4RJ45: + case PCIE_DEVICE_ID_NEO_4_IBM: + case PCI_DEVICE_ID_DIGI_NEO_8: + case PCIE_DEVICE_ID_NEO_8: + case PCIE_DEVICE_ID_NEO_8RJ45: + + jsm_dbg(INIT, &brd->pci_dev, "jsm_found_board - NEO adapter\n"); + + /* get the PCI Base Address Registers */ + brd->membase = pci_resource_start(pdev, 0); + brd->membase_end = pci_resource_end(pdev, 0); + + if (brd->membase & 1) + brd->membase &= ~0x3; + else + brd->membase &= ~0xF; + + /* Assign the board_ops struct */ + brd->bd_ops = &jsm_neo_ops; + + brd->bd_uart_offset = 0x200; + brd->bd_dividend = 921600; + + brd->re_map_membase = ioremap(brd->membase, + pci_resource_len(pdev, 0)); + if (!brd->re_map_membase) { + dev_err(&pdev->dev, + "Card has no PCI Memory resources, failing board.\n"); + rc = -ENOMEM; + goto out_kfree_brd; + } + + break; + default: + rc = -ENXIO; + goto out_kfree_brd; + } + + rc = request_irq(brd->irq, brd->bd_ops->intr, IRQF_SHARED, "JSM", brd); + if (rc) { + dev_warn(&pdev->dev, "Failed to hook IRQ %d\n", brd->irq); + goto out_iounmap; + } + + rc = jsm_tty_init(brd); + if (rc < 0) { + dev_err(&pdev->dev, "Can't init tty devices (%d)\n", rc); + rc = -ENXIO; + goto out_free_irq; + } + + rc = jsm_uart_port_init(brd); + if (rc < 0) { + /* XXX: leaking all resources from jsm_tty_init here! */ + dev_err(&pdev->dev, "Can't init uart port (%d)\n", rc); + rc = -ENXIO; + goto out_free_irq; + } + + /* Log the information about the board */ + dev_info(&pdev->dev, "board %d: Digi Classic/Neo (rev %d), irq %d\n", + adapter_count, brd->rev, brd->irq); + + pci_set_drvdata(pdev, brd); + pci_save_state(pdev); + + return 0; + out_free_irq: + jsm_remove_uart_port(brd); + free_irq(brd->irq, brd); + out_iounmap: + iounmap(brd->re_map_membase); + out_kfree_brd: + kfree(brd); + out_release_regions: + pci_release_regions(pdev); + out_disable_device: + pci_disable_device(pdev); + out: + return rc; +} + +static void jsm_remove_one(struct pci_dev *pdev) +{ + struct jsm_board *brd = pci_get_drvdata(pdev); + int i = 0; + + switch (pdev->device) { + case PCI_DEVICE_ID_CLASSIC_4: + case PCI_DEVICE_ID_CLASSIC_4_422: + case PCI_DEVICE_ID_CLASSIC_8: + case PCI_DEVICE_ID_CLASSIC_8_422: + /* Tell card not to interrupt anymore. */ + outb(0x0, brd->iobase + 0x4c); + break; + default: + break; + } + + jsm_remove_uart_port(brd); + + free_irq(brd->irq, brd); + iounmap(brd->re_map_membase); + + /* Free all allocated channels structs */ + for (i = 0; i < brd->maxports; i++) { + if (brd->channels[i]) { + kfree(brd->channels[i]->ch_rqueue); + kfree(brd->channels[i]->ch_equeue); + kfree(brd->channels[i]); + } + } + + pci_release_regions(pdev); + pci_disable_device(pdev); + kfree(brd); +} + +static const struct pci_device_id jsm_pci_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2DB9), 0, 0, 0 }, + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2DB9PRI), 0, 0, 1 }, + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45), 0, 0, 2 }, + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45PRI), 0, 0, 3 }, + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_4_IBM), 0, 0, 4 }, + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_DIGI_NEO_8), 0, 0, 5 }, + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_4), 0, 0, 6 }, + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_1_422), 0, 0, 7 }, + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_1_422_485), 0, 0, 8 }, + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2_422_485), 0, 0, 9 }, + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_8), 0, 0, 10 }, + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_4), 0, 0, 11 }, + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_4RJ45), 0, 0, 12 }, + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_8RJ45), 0, 0, 13 }, + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_CLASSIC_4), 0, 0, 14 }, + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_CLASSIC_4_422), 0, 0, 15 }, + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_CLASSIC_8), 0, 0, 16 }, + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_CLASSIC_8_422), 0, 0, 17 }, + { 0, } +}; +MODULE_DEVICE_TABLE(pci, jsm_pci_tbl); + +static struct pci_driver jsm_driver = { + .name = JSM_DRIVER_NAME, + .id_table = jsm_pci_tbl, + .probe = jsm_probe_one, + .remove = jsm_remove_one, + .err_handler = &jsm_err_handler, +}; + +static pci_ers_result_t jsm_io_error_detected(struct pci_dev *pdev, + pci_channel_state_t state) +{ + struct jsm_board *brd = pci_get_drvdata(pdev); + + jsm_remove_uart_port(brd); + + return PCI_ERS_RESULT_NEED_RESET; +} + +static pci_ers_result_t jsm_io_slot_reset(struct pci_dev *pdev) +{ + int rc; + + rc = pci_enable_device(pdev); + + if (rc) + return PCI_ERS_RESULT_DISCONNECT; + + pci_set_master(pdev); + + return PCI_ERS_RESULT_RECOVERED; +} + +static void jsm_io_resume(struct pci_dev *pdev) +{ + struct jsm_board *brd = pci_get_drvdata(pdev); + + pci_restore_state(pdev); + pci_save_state(pdev); + + jsm_uart_port_init(brd); +} + +static int __init jsm_init_module(void) +{ + int rc; + + rc = uart_register_driver(&jsm_uart_driver); + if (!rc) { + rc = pci_register_driver(&jsm_driver); + if (rc) + uart_unregister_driver(&jsm_uart_driver); + } + return rc; +} + +static void __exit jsm_exit_module(void) +{ + pci_unregister_driver(&jsm_driver); + uart_unregister_driver(&jsm_uart_driver); +} + +module_init(jsm_init_module); +module_exit(jsm_exit_module); diff --git a/drivers/tty/serial/jsm/jsm_neo.c b/drivers/tty/serial/jsm/jsm_neo.c new file mode 100644 index 000000000..c6f927a76 --- /dev/null +++ b/drivers/tty/serial/jsm/jsm_neo.c @@ -0,0 +1,1406 @@ +// SPDX-License-Identifier: GPL-2.0+ +/************************************************************************ + * Copyright 2003 Digi International (www.digi.com) + * + * Copyright (C) 2004 IBM Corporation. All rights reserved. + * + * Contact Information: + * Scott H Kilau + * Wendy Xiong + * + ***********************************************************************/ +#include /* For udelay */ +#include /* For the various UART offsets */ +#include +#include +#include + +#include "jsm.h" /* Driver main header file */ + +static u32 jsm_offset_table[8] = { 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80 }; + +/* + * This function allows calls to ensure that all outstanding + * PCI writes have been completed, by doing a PCI read against + * a non-destructive, read-only location on the Neo card. + * + * In this case, we are reading the DVID (Read-only Device Identification) + * value of the Neo card. + */ +static inline void neo_pci_posting_flush(struct jsm_board *bd) +{ + readb(bd->re_map_membase + 0x8D); +} + +static void neo_set_cts_flow_control(struct jsm_channel *ch) +{ + u8 ier, efr; + ier = readb(&ch->ch_neo_uart->ier); + efr = readb(&ch->ch_neo_uart->efr); + + jsm_dbg(PARAM, &ch->ch_bd->pci_dev, "Setting CTSFLOW\n"); + + /* Turn on auto CTS flow control */ + ier |= (UART_17158_IER_CTSDSR); + efr |= (UART_17158_EFR_ECB | UART_17158_EFR_CTSDSR); + + /* Turn off auto Xon flow control */ + efr &= ~(UART_17158_EFR_IXON); + + /* Why? Becuz Exar's spec says we have to zero it out before setting it */ + writeb(0, &ch->ch_neo_uart->efr); + + /* Turn on UART enhanced bits */ + writeb(efr, &ch->ch_neo_uart->efr); + + /* Turn on table D, with 8 char hi/low watermarks */ + writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_4DELAY), &ch->ch_neo_uart->fctr); + + /* Feed the UART our trigger levels */ + writeb(8, &ch->ch_neo_uart->tfifo); + ch->ch_t_tlevel = 8; + + writeb(ier, &ch->ch_neo_uart->ier); +} + +static void neo_set_rts_flow_control(struct jsm_channel *ch) +{ + u8 ier, efr; + ier = readb(&ch->ch_neo_uart->ier); + efr = readb(&ch->ch_neo_uart->efr); + + jsm_dbg(PARAM, &ch->ch_bd->pci_dev, "Setting RTSFLOW\n"); + + /* Turn on auto RTS flow control */ + ier |= (UART_17158_IER_RTSDTR); + efr |= (UART_17158_EFR_ECB | UART_17158_EFR_RTSDTR); + + /* Turn off auto Xoff flow control */ + ier &= ~(UART_17158_IER_XOFF); + efr &= ~(UART_17158_EFR_IXOFF); + + /* Why? Becuz Exar's spec says we have to zero it out before setting it */ + writeb(0, &ch->ch_neo_uart->efr); + + /* Turn on UART enhanced bits */ + writeb(efr, &ch->ch_neo_uart->efr); + + writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_4DELAY), &ch->ch_neo_uart->fctr); + ch->ch_r_watermark = 4; + + writeb(56, &ch->ch_neo_uart->rfifo); + ch->ch_r_tlevel = 56; + + writeb(ier, &ch->ch_neo_uart->ier); + + /* + * From the Neo UART spec sheet: + * The auto RTS/DTR function must be started by asserting + * RTS/DTR# output pin (MCR bit-0 or 1 to logic 1 after + * it is enabled. + */ + ch->ch_mostat |= (UART_MCR_RTS); +} + + +static void neo_set_ixon_flow_control(struct jsm_channel *ch) +{ + u8 ier, efr; + ier = readb(&ch->ch_neo_uart->ier); + efr = readb(&ch->ch_neo_uart->efr); + + jsm_dbg(PARAM, &ch->ch_bd->pci_dev, "Setting IXON FLOW\n"); + + /* Turn off auto CTS flow control */ + ier &= ~(UART_17158_IER_CTSDSR); + efr &= ~(UART_17158_EFR_CTSDSR); + + /* Turn on auto Xon flow control */ + efr |= (UART_17158_EFR_ECB | UART_17158_EFR_IXON); + + /* Why? Becuz Exar's spec says we have to zero it out before setting it */ + writeb(0, &ch->ch_neo_uart->efr); + + /* Turn on UART enhanced bits */ + writeb(efr, &ch->ch_neo_uart->efr); + + writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr); + ch->ch_r_watermark = 4; + + writeb(32, &ch->ch_neo_uart->rfifo); + ch->ch_r_tlevel = 32; + + /* Tell UART what start/stop chars it should be looking for */ + writeb(ch->ch_startc, &ch->ch_neo_uart->xonchar1); + writeb(0, &ch->ch_neo_uart->xonchar2); + + writeb(ch->ch_stopc, &ch->ch_neo_uart->xoffchar1); + writeb(0, &ch->ch_neo_uart->xoffchar2); + + writeb(ier, &ch->ch_neo_uart->ier); +} + +static void neo_set_ixoff_flow_control(struct jsm_channel *ch) +{ + u8 ier, efr; + ier = readb(&ch->ch_neo_uart->ier); + efr = readb(&ch->ch_neo_uart->efr); + + jsm_dbg(PARAM, &ch->ch_bd->pci_dev, "Setting IXOFF FLOW\n"); + + /* Turn off auto RTS flow control */ + ier &= ~(UART_17158_IER_RTSDTR); + efr &= ~(UART_17158_EFR_RTSDTR); + + /* Turn on auto Xoff flow control */ + ier |= (UART_17158_IER_XOFF); + efr |= (UART_17158_EFR_ECB | UART_17158_EFR_IXOFF); + + /* Why? Becuz Exar's spec says we have to zero it out before setting it */ + writeb(0, &ch->ch_neo_uart->efr); + + /* Turn on UART enhanced bits */ + writeb(efr, &ch->ch_neo_uart->efr); + + /* Turn on table D, with 8 char hi/low watermarks */ + writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr); + + writeb(8, &ch->ch_neo_uart->tfifo); + ch->ch_t_tlevel = 8; + + /* Tell UART what start/stop chars it should be looking for */ + writeb(ch->ch_startc, &ch->ch_neo_uart->xonchar1); + writeb(0, &ch->ch_neo_uart->xonchar2); + + writeb(ch->ch_stopc, &ch->ch_neo_uart->xoffchar1); + writeb(0, &ch->ch_neo_uart->xoffchar2); + + writeb(ier, &ch->ch_neo_uart->ier); +} + +static void neo_set_no_input_flow_control(struct jsm_channel *ch) +{ + u8 ier, efr; + ier = readb(&ch->ch_neo_uart->ier); + efr = readb(&ch->ch_neo_uart->efr); + + jsm_dbg(PARAM, &ch->ch_bd->pci_dev, "Unsetting Input FLOW\n"); + + /* Turn off auto RTS flow control */ + ier &= ~(UART_17158_IER_RTSDTR); + efr &= ~(UART_17158_EFR_RTSDTR); + + /* Turn off auto Xoff flow control */ + ier &= ~(UART_17158_IER_XOFF); + if (ch->ch_c_iflag & IXON) + efr &= ~(UART_17158_EFR_IXOFF); + else + efr &= ~(UART_17158_EFR_ECB | UART_17158_EFR_IXOFF); + + /* Why? Becuz Exar's spec says we have to zero it out before setting it */ + writeb(0, &ch->ch_neo_uart->efr); + + /* Turn on UART enhanced bits */ + writeb(efr, &ch->ch_neo_uart->efr); + + /* Turn on table D, with 8 char hi/low watermarks */ + writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr); + + ch->ch_r_watermark = 0; + + writeb(16, &ch->ch_neo_uart->tfifo); + ch->ch_t_tlevel = 16; + + writeb(16, &ch->ch_neo_uart->rfifo); + ch->ch_r_tlevel = 16; + + writeb(ier, &ch->ch_neo_uart->ier); +} + +static void neo_set_no_output_flow_control(struct jsm_channel *ch) +{ + u8 ier, efr; + ier = readb(&ch->ch_neo_uart->ier); + efr = readb(&ch->ch_neo_uart->efr); + + jsm_dbg(PARAM, &ch->ch_bd->pci_dev, "Unsetting Output FLOW\n"); + + /* Turn off auto CTS flow control */ + ier &= ~(UART_17158_IER_CTSDSR); + efr &= ~(UART_17158_EFR_CTSDSR); + + /* Turn off auto Xon flow control */ + if (ch->ch_c_iflag & IXOFF) + efr &= ~(UART_17158_EFR_IXON); + else + efr &= ~(UART_17158_EFR_ECB | UART_17158_EFR_IXON); + + /* Why? Becuz Exar's spec says we have to zero it out before setting it */ + writeb(0, &ch->ch_neo_uart->efr); + + /* Turn on UART enhanced bits */ + writeb(efr, &ch->ch_neo_uart->efr); + + /* Turn on table D, with 8 char hi/low watermarks */ + writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr); + + ch->ch_r_watermark = 0; + + writeb(16, &ch->ch_neo_uart->tfifo); + ch->ch_t_tlevel = 16; + + writeb(16, &ch->ch_neo_uart->rfifo); + ch->ch_r_tlevel = 16; + + writeb(ier, &ch->ch_neo_uart->ier); +} + +static inline void neo_set_new_start_stop_chars(struct jsm_channel *ch) +{ + + /* if hardware flow control is set, then skip this whole thing */ + if (ch->ch_c_cflag & CRTSCTS) + return; + + jsm_dbg(PARAM, &ch->ch_bd->pci_dev, "start\n"); + + /* Tell UART what start/stop chars it should be looking for */ + writeb(ch->ch_startc, &ch->ch_neo_uart->xonchar1); + writeb(0, &ch->ch_neo_uart->xonchar2); + + writeb(ch->ch_stopc, &ch->ch_neo_uart->xoffchar1); + writeb(0, &ch->ch_neo_uart->xoffchar2); +} + +static void neo_copy_data_from_uart_to_queue(struct jsm_channel *ch) +{ + int qleft = 0; + u8 linestatus = 0; + u8 error_mask = 0; + int n = 0; + int total = 0; + u16 head; + u16 tail; + + /* cache head and tail of queue */ + head = ch->ch_r_head & RQUEUEMASK; + tail = ch->ch_r_tail & RQUEUEMASK; + + /* Get our cached LSR */ + linestatus = ch->ch_cached_lsr; + ch->ch_cached_lsr = 0; + + /* Store how much space we have left in the queue */ + if ((qleft = tail - head - 1) < 0) + qleft += RQUEUEMASK + 1; + + /* + * If the UART is not in FIFO mode, force the FIFO copy to + * NOT be run, by setting total to 0. + * + * On the other hand, if the UART IS in FIFO mode, then ask + * the UART to give us an approximation of data it has RX'ed. + */ + if (!(ch->ch_flags & CH_FIFO_ENABLED)) + total = 0; + else { + total = readb(&ch->ch_neo_uart->rfifo); + + /* + * EXAR chip bug - RX FIFO COUNT - Fudge factor. + * + * This resolves a problem/bug with the Exar chip that sometimes + * returns a bogus value in the rfifo register. + * The count can be any where from 0-3 bytes "off". + * Bizarre, but true. + */ + total -= 3; + } + + /* + * Finally, bound the copy to make sure we don't overflow + * our own queue... + * The byte by byte copy loop below this loop this will + * deal with the queue overflow possibility. + */ + total = min(total, qleft); + + while (total > 0) { + /* + * Grab the linestatus register, we need to check + * to see if there are any errors in the FIFO. + */ + linestatus = readb(&ch->ch_neo_uart->lsr); + + /* + * Break out if there is a FIFO error somewhere. + * This will allow us to go byte by byte down below, + * finding the exact location of the error. + */ + if (linestatus & UART_17158_RX_FIFO_DATA_ERROR) + break; + + /* Make sure we don't go over the end of our queue */ + n = min(((u32) total), (RQUEUESIZE - (u32) head)); + + /* + * Cut down n even further if needed, this is to fix + * a problem with memcpy_fromio() with the Neo on the + * IBM pSeries platform. + * 15 bytes max appears to be the magic number. + */ + n = min((u32) n, (u32) 12); + + /* + * Since we are grabbing the linestatus register, which + * will reset some bits after our read, we need to ensure + * we don't miss our TX FIFO emptys. + */ + if (linestatus & (UART_LSR_THRE | UART_17158_TX_AND_FIFO_CLR)) + ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); + + linestatus = 0; + + /* Copy data from uart to the queue */ + memcpy_fromio(ch->ch_rqueue + head, &ch->ch_neo_uart->txrxburst, n); + /* + * Since RX_FIFO_DATA_ERROR was 0, we are guaranteed + * that all the data currently in the FIFO is free of + * breaks and parity/frame/orun errors. + */ + memset(ch->ch_equeue + head, 0, n); + + /* Add to and flip head if needed */ + head = (head + n) & RQUEUEMASK; + total -= n; + qleft -= n; + ch->ch_rxcount += n; + } + + /* + * Create a mask to determine whether we should + * insert the character (if any) into our queue. + */ + if (ch->ch_c_iflag & IGNBRK) + error_mask |= UART_LSR_BI; + + /* + * Now cleanup any leftover bytes still in the UART. + * Also deal with any possible queue overflow here as well. + */ + while (1) { + + /* + * Its possible we have a linestatus from the loop above + * this, so we "OR" on any extra bits. + */ + linestatus |= readb(&ch->ch_neo_uart->lsr); + + /* + * If the chip tells us there is no more data pending to + * be read, we can then leave. + * But before we do, cache the linestatus, just in case. + */ + if (!(linestatus & UART_LSR_DR)) { + ch->ch_cached_lsr = linestatus; + break; + } + + /* No need to store this bit */ + linestatus &= ~UART_LSR_DR; + + /* + * Since we are grabbing the linestatus register, which + * will reset some bits after our read, we need to ensure + * we don't miss our TX FIFO emptys. + */ + if (linestatus & (UART_LSR_THRE | UART_17158_TX_AND_FIFO_CLR)) { + linestatus &= ~(UART_LSR_THRE | UART_17158_TX_AND_FIFO_CLR); + ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); + } + + /* + * Discard character if we are ignoring the error mask. + */ + if (linestatus & error_mask) { + u8 discard; + linestatus = 0; + memcpy_fromio(&discard, &ch->ch_neo_uart->txrxburst, 1); + continue; + } + + /* + * If our queue is full, we have no choice but to drop some data. + * The assumption is that HWFLOW or SWFLOW should have stopped + * things way way before we got to this point. + * + * I decided that I wanted to ditch the oldest data first, + * I hope thats okay with everyone? Yes? Good. + */ + while (qleft < 1) { + jsm_dbg(READ, &ch->ch_bd->pci_dev, + "Queue full, dropping DATA:%x LSR:%x\n", + ch->ch_rqueue[tail], ch->ch_equeue[tail]); + + ch->ch_r_tail = tail = (tail + 1) & RQUEUEMASK; + ch->ch_err_overrun++; + qleft++; + } + + memcpy_fromio(ch->ch_rqueue + head, &ch->ch_neo_uart->txrxburst, 1); + ch->ch_equeue[head] = (u8) linestatus; + + jsm_dbg(READ, &ch->ch_bd->pci_dev, "DATA/LSR pair: %x %x\n", + ch->ch_rqueue[head], ch->ch_equeue[head]); + + /* Ditch any remaining linestatus value. */ + linestatus = 0; + + /* Add to and flip head if needed */ + head = (head + 1) & RQUEUEMASK; + + qleft--; + ch->ch_rxcount++; + } + + /* + * Write new final heads to channel structure. + */ + ch->ch_r_head = head & RQUEUEMASK; + ch->ch_e_head = head & EQUEUEMASK; + jsm_input(ch); +} + +static void neo_copy_data_from_queue_to_uart(struct jsm_channel *ch) +{ + u16 head; + u16 tail; + int n; + int s; + int qlen; + u32 len_written = 0; + struct circ_buf *circ; + + if (!ch) + return; + + circ = &ch->uart_port.state->xmit; + + /* No data to write to the UART */ + if (uart_circ_empty(circ)) + return; + + /* If port is "stopped", don't send any data to the UART */ + if ((ch->ch_flags & CH_STOP) || (ch->ch_flags & CH_BREAK_SENDING)) + return; + /* + * If FIFOs are disabled. Send data directly to txrx register + */ + if (!(ch->ch_flags & CH_FIFO_ENABLED)) { + u8 lsrbits = readb(&ch->ch_neo_uart->lsr); + + ch->ch_cached_lsr |= lsrbits; + if (ch->ch_cached_lsr & UART_LSR_THRE) { + ch->ch_cached_lsr &= ~(UART_LSR_THRE); + + writeb(circ->buf[circ->tail], &ch->ch_neo_uart->txrx); + jsm_dbg(WRITE, &ch->ch_bd->pci_dev, + "Tx data: %x\n", circ->buf[circ->tail]); + circ->tail = (circ->tail + 1) & (UART_XMIT_SIZE - 1); + ch->ch_txcount++; + } + return; + } + + /* + * We have to do it this way, because of the EXAR TXFIFO count bug. + */ + if (!(ch->ch_flags & (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM))) + return; + + n = UART_17158_TX_FIFOSIZE - ch->ch_t_tlevel; + + /* cache head and tail of queue */ + head = circ->head & (UART_XMIT_SIZE - 1); + tail = circ->tail & (UART_XMIT_SIZE - 1); + qlen = uart_circ_chars_pending(circ); + + /* Find minimum of the FIFO space, versus queue length */ + n = min(n, qlen); + + while (n > 0) { + + s = ((head >= tail) ? head : UART_XMIT_SIZE) - tail; + s = min(s, n); + + if (s <= 0) + break; + + memcpy_toio(&ch->ch_neo_uart->txrxburst, circ->buf + tail, s); + /* Add and flip queue if needed */ + tail = (tail + s) & (UART_XMIT_SIZE - 1); + n -= s; + ch->ch_txcount += s; + len_written += s; + } + + /* Update the final tail */ + circ->tail = tail & (UART_XMIT_SIZE - 1); + + if (len_written >= ch->ch_t_tlevel) + ch->ch_flags &= ~(CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); + + if (uart_circ_empty(circ)) + uart_write_wakeup(&ch->uart_port); +} + +static void neo_parse_modem(struct jsm_channel *ch, u8 signals) +{ + u8 msignals = signals; + + jsm_dbg(MSIGS, &ch->ch_bd->pci_dev, + "neo_parse_modem: port: %d msignals: %x\n", + ch->ch_portnum, msignals); + + /* Scrub off lower bits. They signify delta's, which I don't care about */ + /* Keep DDCD and DDSR though */ + msignals &= 0xf8; + + if (msignals & UART_MSR_DDCD) + uart_handle_dcd_change(&ch->uart_port, msignals & UART_MSR_DCD); + if (msignals & UART_MSR_DDSR) + uart_handle_cts_change(&ch->uart_port, msignals & UART_MSR_CTS); + if (msignals & UART_MSR_DCD) + ch->ch_mistat |= UART_MSR_DCD; + else + ch->ch_mistat &= ~UART_MSR_DCD; + + if (msignals & UART_MSR_DSR) + ch->ch_mistat |= UART_MSR_DSR; + else + ch->ch_mistat &= ~UART_MSR_DSR; + + if (msignals & UART_MSR_RI) + ch->ch_mistat |= UART_MSR_RI; + else + ch->ch_mistat &= ~UART_MSR_RI; + + if (msignals & UART_MSR_CTS) + ch->ch_mistat |= UART_MSR_CTS; + else + ch->ch_mistat &= ~UART_MSR_CTS; + + jsm_dbg(MSIGS, &ch->ch_bd->pci_dev, + "Port: %d DTR: %d RTS: %d CTS: %d DSR: %d " "RI: %d CD: %d\n", + ch->ch_portnum, + !!((ch->ch_mistat | ch->ch_mostat) & UART_MCR_DTR), + !!((ch->ch_mistat | ch->ch_mostat) & UART_MCR_RTS), + !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_CTS), + !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_DSR), + !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_RI), + !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_DCD)); +} + +/* Make the UART raise any of the output signals we want up */ +static void neo_assert_modem_signals(struct jsm_channel *ch) +{ + if (!ch) + return; + + writeb(ch->ch_mostat, &ch->ch_neo_uart->mcr); + + /* flush write operation */ + neo_pci_posting_flush(ch->ch_bd); +} + +/* + * Flush the WRITE FIFO on the Neo. + * + * NOTE: Channel lock MUST be held before calling this function! + */ +static void neo_flush_uart_write(struct jsm_channel *ch) +{ + u8 tmp = 0; + int i = 0; + + if (!ch) + return; + + writeb((UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_XMIT), &ch->ch_neo_uart->isr_fcr); + + for (i = 0; i < 10; i++) { + + /* Check to see if the UART feels it completely flushed the FIFO. */ + tmp = readb(&ch->ch_neo_uart->isr_fcr); + if (tmp & UART_FCR_CLEAR_XMIT) { + jsm_dbg(IOCTL, &ch->ch_bd->pci_dev, + "Still flushing TX UART... i: %d\n", i); + udelay(10); + } + else + break; + } + + ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); +} + + +/* + * Flush the READ FIFO on the Neo. + * + * NOTE: Channel lock MUST be held before calling this function! + */ +static void neo_flush_uart_read(struct jsm_channel *ch) +{ + u8 tmp = 0; + int i = 0; + + if (!ch) + return; + + writeb((UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR), &ch->ch_neo_uart->isr_fcr); + + for (i = 0; i < 10; i++) { + + /* Check to see if the UART feels it completely flushed the FIFO. */ + tmp = readb(&ch->ch_neo_uart->isr_fcr); + if (tmp & 2) { + jsm_dbg(IOCTL, &ch->ch_bd->pci_dev, + "Still flushing RX UART... i: %d\n", i); + udelay(10); + } + else + break; + } +} + +/* + * No locks are assumed to be held when calling this function. + */ +static void neo_clear_break(struct jsm_channel *ch) +{ + unsigned long lock_flags; + + spin_lock_irqsave(&ch->ch_lock, lock_flags); + + /* Turn break off, and unset some variables */ + if (ch->ch_flags & CH_BREAK_SENDING) { + u8 temp = readb(&ch->ch_neo_uart->lcr); + writeb((temp & ~UART_LCR_SBC), &ch->ch_neo_uart->lcr); + + ch->ch_flags &= ~(CH_BREAK_SENDING); + jsm_dbg(IOCTL, &ch->ch_bd->pci_dev, + "clear break Finishing UART_LCR_SBC! finished: %lx\n", + jiffies); + + /* flush write operation */ + neo_pci_posting_flush(ch->ch_bd); + } + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); +} + +/* + * Parse the ISR register. + */ +static void neo_parse_isr(struct jsm_board *brd, u32 port) +{ + struct jsm_channel *ch; + u8 isr; + u8 cause; + unsigned long lock_flags; + + if (!brd) + return; + + if (port >= brd->maxports) + return; + + ch = brd->channels[port]; + if (!ch) + return; + + /* Here we try to figure out what caused the interrupt to happen */ + while (1) { + + isr = readb(&ch->ch_neo_uart->isr_fcr); + + /* Bail if no pending interrupt */ + if (isr & UART_IIR_NO_INT) + break; + + /* + * Yank off the upper 2 bits, which just show that the FIFO's are enabled. + */ + isr &= ~(UART_17158_IIR_FIFO_ENABLED); + + jsm_dbg(INTR, &ch->ch_bd->pci_dev, "%s:%d isr: %x\n", + __FILE__, __LINE__, isr); + + if (isr & (UART_17158_IIR_RDI_TIMEOUT | UART_IIR_RDI)) { + /* Read data from uart -> queue */ + neo_copy_data_from_uart_to_queue(ch); + + /* Call our tty layer to enforce queue flow control if needed. */ + spin_lock_irqsave(&ch->ch_lock, lock_flags); + jsm_check_queue_flow_control(ch); + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + } + + if (isr & UART_IIR_THRI) { + /* Transfer data (if any) from Write Queue -> UART. */ + spin_lock_irqsave(&ch->ch_lock, lock_flags); + ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + neo_copy_data_from_queue_to_uart(ch); + } + + if (isr & UART_17158_IIR_XONXOFF) { + cause = readb(&ch->ch_neo_uart->xoffchar1); + + jsm_dbg(INTR, &ch->ch_bd->pci_dev, + "Port %d. Got ISR_XONXOFF: cause:%x\n", + port, cause); + + /* + * Since the UART detected either an XON or + * XOFF match, we need to figure out which + * one it was, so we can suspend or resume data flow. + */ + spin_lock_irqsave(&ch->ch_lock, lock_flags); + if (cause == UART_17158_XON_DETECT) { + /* Is output stopped right now, if so, resume it */ + if (brd->channels[port]->ch_flags & CH_STOP) { + ch->ch_flags &= ~(CH_STOP); + } + jsm_dbg(INTR, &ch->ch_bd->pci_dev, + "Port %d. XON detected in incoming data\n", + port); + } + else if (cause == UART_17158_XOFF_DETECT) { + if (!(brd->channels[port]->ch_flags & CH_STOP)) { + ch->ch_flags |= CH_STOP; + jsm_dbg(INTR, &ch->ch_bd->pci_dev, + "Setting CH_STOP\n"); + } + jsm_dbg(INTR, &ch->ch_bd->pci_dev, + "Port: %d. XOFF detected in incoming data\n", + port); + } + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + } + + if (isr & UART_17158_IIR_HWFLOW_STATE_CHANGE) { + /* + * If we get here, this means the hardware is doing auto flow control. + * Check to see whether RTS/DTR or CTS/DSR caused this interrupt. + */ + cause = readb(&ch->ch_neo_uart->mcr); + + /* Which pin is doing auto flow? RTS or DTR? */ + spin_lock_irqsave(&ch->ch_lock, lock_flags); + if ((cause & 0x4) == 0) { + if (cause & UART_MCR_RTS) + ch->ch_mostat |= UART_MCR_RTS; + else + ch->ch_mostat &= ~(UART_MCR_RTS); + } else { + if (cause & UART_MCR_DTR) + ch->ch_mostat |= UART_MCR_DTR; + else + ch->ch_mostat &= ~(UART_MCR_DTR); + } + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + } + + /* Parse any modem signal changes */ + jsm_dbg(INTR, &ch->ch_bd->pci_dev, + "MOD_STAT: sending to parse_modem_sigs\n"); + spin_lock_irqsave(&ch->uart_port.lock, lock_flags); + neo_parse_modem(ch, readb(&ch->ch_neo_uart->msr)); + spin_unlock_irqrestore(&ch->uart_port.lock, lock_flags); + } +} + +static inline void neo_parse_lsr(struct jsm_board *brd, u32 port) +{ + struct jsm_channel *ch; + int linestatus; + unsigned long lock_flags; + + if (!brd) + return; + + if (port >= brd->maxports) + return; + + ch = brd->channels[port]; + if (!ch) + return; + + linestatus = readb(&ch->ch_neo_uart->lsr); + + jsm_dbg(INTR, &ch->ch_bd->pci_dev, "%s:%d port: %d linestatus: %x\n", + __FILE__, __LINE__, port, linestatus); + + ch->ch_cached_lsr |= linestatus; + + if (ch->ch_cached_lsr & UART_LSR_DR) { + /* Read data from uart -> queue */ + neo_copy_data_from_uart_to_queue(ch); + spin_lock_irqsave(&ch->ch_lock, lock_flags); + jsm_check_queue_flow_control(ch); + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + } + + /* + * This is a special flag. It indicates that at least 1 + * RX error (parity, framing, or break) has happened. + * Mark this in our struct, which will tell me that I have + *to do the special RX+LSR read for this FIFO load. + */ + if (linestatus & UART_17158_RX_FIFO_DATA_ERROR) + jsm_dbg(INTR, &ch->ch_bd->pci_dev, + "%s:%d Port: %d Got an RX error, need to parse LSR\n", + __FILE__, __LINE__, port); + + /* + * The next 3 tests should *NOT* happen, as the above test + * should encapsulate all 3... At least, thats what Exar says. + */ + + if (linestatus & UART_LSR_PE) { + ch->ch_err_parity++; + jsm_dbg(INTR, &ch->ch_bd->pci_dev, "%s:%d Port: %d. PAR ERR!\n", + __FILE__, __LINE__, port); + } + + if (linestatus & UART_LSR_FE) { + ch->ch_err_frame++; + jsm_dbg(INTR, &ch->ch_bd->pci_dev, "%s:%d Port: %d. FRM ERR!\n", + __FILE__, __LINE__, port); + } + + if (linestatus & UART_LSR_BI) { + ch->ch_err_break++; + jsm_dbg(INTR, &ch->ch_bd->pci_dev, + "%s:%d Port: %d. BRK INTR!\n", + __FILE__, __LINE__, port); + } + + if (linestatus & UART_LSR_OE) { + /* + * Rx Oruns. Exar says that an orun will NOT corrupt + * the FIFO. It will just replace the holding register + * with this new data byte. So basically just ignore this. + * Probably we should eventually have an orun stat in our driver... + */ + ch->ch_err_overrun++; + jsm_dbg(INTR, &ch->ch_bd->pci_dev, + "%s:%d Port: %d. Rx Overrun!\n", + __FILE__, __LINE__, port); + } + + if (linestatus & UART_LSR_THRE) { + spin_lock_irqsave(&ch->ch_lock, lock_flags); + ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + + /* Transfer data (if any) from Write Queue -> UART. */ + neo_copy_data_from_queue_to_uart(ch); + } + else if (linestatus & UART_17158_TX_AND_FIFO_CLR) { + spin_lock_irqsave(&ch->ch_lock, lock_flags); + ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + + /* Transfer data (if any) from Write Queue -> UART. */ + neo_copy_data_from_queue_to_uart(ch); + } +} + +/* + * neo_param() + * Send any/all changes to the line to the UART. + */ +static void neo_param(struct jsm_channel *ch) +{ + u8 lcr = 0; + u8 uart_lcr, ier; + u32 baud; + int quot; + struct jsm_board *bd; + + bd = ch->ch_bd; + if (!bd) + return; + + /* + * If baud rate is zero, flush queues, and set mval to drop DTR. + */ + if ((ch->ch_c_cflag & (CBAUD)) == 0) { + ch->ch_r_head = ch->ch_r_tail = 0; + ch->ch_e_head = ch->ch_e_tail = 0; + + neo_flush_uart_write(ch); + neo_flush_uart_read(ch); + + ch->ch_flags |= (CH_BAUD0); + ch->ch_mostat &= ~(UART_MCR_RTS | UART_MCR_DTR); + neo_assert_modem_signals(ch); + return; + + } else { + int i; + unsigned int cflag; + static struct { + unsigned int rate; + unsigned int cflag; + } baud_rates[] = { + { 921600, B921600 }, + { 460800, B460800 }, + { 230400, B230400 }, + { 115200, B115200 }, + { 57600, B57600 }, + { 38400, B38400 }, + { 19200, B19200 }, + { 9600, B9600 }, + { 4800, B4800 }, + { 2400, B2400 }, + { 1200, B1200 }, + { 600, B600 }, + { 300, B300 }, + { 200, B200 }, + { 150, B150 }, + { 134, B134 }, + { 110, B110 }, + { 75, B75 }, + { 50, B50 }, + }; + + cflag = C_BAUD(ch->uart_port.state->port.tty); + baud = 9600; + for (i = 0; i < ARRAY_SIZE(baud_rates); i++) { + if (baud_rates[i].cflag == cflag) { + baud = baud_rates[i].rate; + break; + } + } + + if (ch->ch_flags & CH_BAUD0) + ch->ch_flags &= ~(CH_BAUD0); + } + + if (ch->ch_c_cflag & PARENB) + lcr |= UART_LCR_PARITY; + + if (!(ch->ch_c_cflag & PARODD)) + lcr |= UART_LCR_EPAR; + + /* + * Not all platforms support mark/space parity, + * so this will hide behind an ifdef. + */ +#ifdef CMSPAR + if (ch->ch_c_cflag & CMSPAR) + lcr |= UART_LCR_SPAR; +#endif + + if (ch->ch_c_cflag & CSTOPB) + lcr |= UART_LCR_STOP; + + switch (ch->ch_c_cflag & CSIZE) { + case CS5: + lcr |= UART_LCR_WLEN5; + break; + case CS6: + lcr |= UART_LCR_WLEN6; + break; + case CS7: + lcr |= UART_LCR_WLEN7; + break; + case CS8: + default: + lcr |= UART_LCR_WLEN8; + break; + } + + ier = readb(&ch->ch_neo_uart->ier); + uart_lcr = readb(&ch->ch_neo_uart->lcr); + + quot = ch->ch_bd->bd_dividend / baud; + + if (quot != 0) { + writeb(UART_LCR_DLAB, &ch->ch_neo_uart->lcr); + writeb((quot & 0xff), &ch->ch_neo_uart->txrx); + writeb((quot >> 8), &ch->ch_neo_uart->ier); + writeb(lcr, &ch->ch_neo_uart->lcr); + } + + if (uart_lcr != lcr) + writeb(lcr, &ch->ch_neo_uart->lcr); + + if (ch->ch_c_cflag & CREAD) + ier |= (UART_IER_RDI | UART_IER_RLSI); + + ier |= (UART_IER_THRI | UART_IER_MSI); + + writeb(ier, &ch->ch_neo_uart->ier); + + /* Set new start/stop chars */ + neo_set_new_start_stop_chars(ch); + + if (ch->ch_c_cflag & CRTSCTS) + neo_set_cts_flow_control(ch); + else if (ch->ch_c_iflag & IXON) { + /* If start/stop is set to disable, then we should disable flow control */ + if ((ch->ch_startc == __DISABLED_CHAR) || (ch->ch_stopc == __DISABLED_CHAR)) + neo_set_no_output_flow_control(ch); + else + neo_set_ixon_flow_control(ch); + } + else + neo_set_no_output_flow_control(ch); + + if (ch->ch_c_cflag & CRTSCTS) + neo_set_rts_flow_control(ch); + else if (ch->ch_c_iflag & IXOFF) { + /* If start/stop is set to disable, then we should disable flow control */ + if ((ch->ch_startc == __DISABLED_CHAR) || (ch->ch_stopc == __DISABLED_CHAR)) + neo_set_no_input_flow_control(ch); + else + neo_set_ixoff_flow_control(ch); + } + else + neo_set_no_input_flow_control(ch); + /* + * Adjust the RX FIFO Trigger level if baud is less than 9600. + * Not exactly elegant, but this is needed because of the Exar chip's + * delay on firing off the RX FIFO interrupt on slower baud rates. + */ + if (baud < 9600) { + writeb(1, &ch->ch_neo_uart->rfifo); + ch->ch_r_tlevel = 1; + } + + neo_assert_modem_signals(ch); + + /* Get current status of the modem signals now */ + neo_parse_modem(ch, readb(&ch->ch_neo_uart->msr)); + return; +} + +/* + * jsm_neo_intr() + * + * Neo specific interrupt handler. + */ +static irqreturn_t neo_intr(int irq, void *voidbrd) +{ + struct jsm_board *brd = voidbrd; + struct jsm_channel *ch; + int port = 0; + int type = 0; + int current_port; + u32 tmp; + u32 uart_poll; + unsigned long lock_flags; + unsigned long lock_flags2; + int outofloop_count = 0; + + /* Lock out the slow poller from running on this board. */ + spin_lock_irqsave(&brd->bd_intr_lock, lock_flags); + + /* + * Read in "extended" IRQ information from the 32bit Neo register. + * Bits 0-7: What port triggered the interrupt. + * Bits 8-31: Each 3bits indicate what type of interrupt occurred. + */ + uart_poll = readl(brd->re_map_membase + UART_17158_POLL_ADDR_OFFSET); + + jsm_dbg(INTR, &brd->pci_dev, "%s:%d uart_poll: %x\n", + __FILE__, __LINE__, uart_poll); + + if (!uart_poll) { + jsm_dbg(INTR, &brd->pci_dev, + "Kernel interrupted to me, but no pending interrupts...\n"); + spin_unlock_irqrestore(&brd->bd_intr_lock, lock_flags); + return IRQ_NONE; + } + + /* At this point, we have at least SOMETHING to service, dig further... */ + + current_port = 0; + + /* Loop on each port */ + while (((uart_poll & 0xff) != 0) && (outofloop_count < 0xff)){ + + tmp = uart_poll; + outofloop_count++; + + /* Check current port to see if it has interrupt pending */ + if ((tmp & jsm_offset_table[current_port]) != 0) { + port = current_port; + type = tmp >> (8 + (port * 3)); + type &= 0x7; + } else { + current_port++; + continue; + } + + jsm_dbg(INTR, &brd->pci_dev, "%s:%d port: %x type: %x\n", + __FILE__, __LINE__, port, type); + + /* Remove this port + type from uart_poll */ + uart_poll &= ~(jsm_offset_table[port]); + + if (!type) { + /* If no type, just ignore it, and move onto next port */ + jsm_dbg(INTR, &brd->pci_dev, + "Interrupt with no type! port: %d\n", port); + continue; + } + + /* Switch on type of interrupt we have */ + switch (type) { + + case UART_17158_RXRDY_TIMEOUT: + /* + * RXRDY Time-out is cleared by reading data in the + * RX FIFO until it falls below the trigger level. + */ + + /* Verify the port is in range. */ + if (port >= brd->nasync) + continue; + + ch = brd->channels[port]; + if (!ch) + continue; + + neo_copy_data_from_uart_to_queue(ch); + + /* Call our tty layer to enforce queue flow control if needed. */ + spin_lock_irqsave(&ch->ch_lock, lock_flags2); + jsm_check_queue_flow_control(ch); + spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); + + continue; + + case UART_17158_RX_LINE_STATUS: + /* + * RXRDY and RX LINE Status (logic OR of LSR[4:1]) + */ + neo_parse_lsr(brd, port); + continue; + + case UART_17158_TXRDY: + /* + * TXRDY interrupt clears after reading ISR register for the UART channel. + */ + + /* + * Yes, this is odd... + * Why would I check EVERY possibility of type of + * interrupt, when we know its TXRDY??? + * Becuz for some reason, even tho we got triggered for TXRDY, + * it seems to be occasionally wrong. Instead of TX, which + * it should be, I was getting things like RXDY too. Weird. + */ + neo_parse_isr(brd, port); + continue; + + case UART_17158_MSR: + /* + * MSR or flow control was seen. + */ + neo_parse_isr(brd, port); + continue; + + default: + /* + * The UART triggered us with a bogus interrupt type. + * It appears the Exar chip, when REALLY bogged down, will throw + * these once and awhile. + * Its harmless, just ignore it and move on. + */ + jsm_dbg(INTR, &brd->pci_dev, + "%s:%d Unknown Interrupt type: %x\n", + __FILE__, __LINE__, type); + continue; + } + } + + spin_unlock_irqrestore(&brd->bd_intr_lock, lock_flags); + + jsm_dbg(INTR, &brd->pci_dev, "finish\n"); + return IRQ_HANDLED; +} + +/* + * Neo specific way of turning off the receiver. + * Used as a way to enforce queue flow control when in + * hardware flow control mode. + */ +static void neo_disable_receiver(struct jsm_channel *ch) +{ + u8 tmp = readb(&ch->ch_neo_uart->ier); + tmp &= ~(UART_IER_RDI); + writeb(tmp, &ch->ch_neo_uart->ier); + + /* flush write operation */ + neo_pci_posting_flush(ch->ch_bd); +} + + +/* + * Neo specific way of turning on the receiver. + * Used as a way to un-enforce queue flow control when in + * hardware flow control mode. + */ +static void neo_enable_receiver(struct jsm_channel *ch) +{ + u8 tmp = readb(&ch->ch_neo_uart->ier); + tmp |= (UART_IER_RDI); + writeb(tmp, &ch->ch_neo_uart->ier); + + /* flush write operation */ + neo_pci_posting_flush(ch->ch_bd); +} + +static void neo_send_start_character(struct jsm_channel *ch) +{ + if (!ch) + return; + + if (ch->ch_startc != __DISABLED_CHAR) { + ch->ch_xon_sends++; + writeb(ch->ch_startc, &ch->ch_neo_uart->txrx); + + /* flush write operation */ + neo_pci_posting_flush(ch->ch_bd); + } +} + +static void neo_send_stop_character(struct jsm_channel *ch) +{ + if (!ch) + return; + + if (ch->ch_stopc != __DISABLED_CHAR) { + ch->ch_xoff_sends++; + writeb(ch->ch_stopc, &ch->ch_neo_uart->txrx); + + /* flush write operation */ + neo_pci_posting_flush(ch->ch_bd); + } +} + +/* + * neo_uart_init + */ +static void neo_uart_init(struct jsm_channel *ch) +{ + writeb(0, &ch->ch_neo_uart->ier); + writeb(0, &ch->ch_neo_uart->efr); + writeb(UART_EFR_ECB, &ch->ch_neo_uart->efr); + + /* Clear out UART and FIFO */ + readb(&ch->ch_neo_uart->txrx); + writeb((UART_FCR_ENABLE_FIFO|UART_FCR_CLEAR_RCVR|UART_FCR_CLEAR_XMIT), &ch->ch_neo_uart->isr_fcr); + readb(&ch->ch_neo_uart->lsr); + readb(&ch->ch_neo_uart->msr); + + ch->ch_flags |= CH_FIFO_ENABLED; + + /* Assert any signals we want up */ + writeb(ch->ch_mostat, &ch->ch_neo_uart->mcr); +} + +/* + * Make the UART completely turn off. + */ +static void neo_uart_off(struct jsm_channel *ch) +{ + /* Turn off UART enhanced bits */ + writeb(0, &ch->ch_neo_uart->efr); + + /* Stop all interrupts from occurring. */ + writeb(0, &ch->ch_neo_uart->ier); +} + +static u32 neo_get_uart_bytes_left(struct jsm_channel *ch) +{ + u8 left = 0; + u8 lsr = readb(&ch->ch_neo_uart->lsr); + + /* We must cache the LSR as some of the bits get reset once read... */ + ch->ch_cached_lsr |= lsr; + + /* Determine whether the Transmitter is empty or not */ + if (!(lsr & UART_LSR_TEMT)) + left = 1; + else { + ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); + left = 0; + } + + return left; +} + +/* Channel lock MUST be held by the calling function! */ +static void neo_send_break(struct jsm_channel *ch) +{ + /* + * Set the time we should stop sending the break. + * If we are already sending a break, toss away the existing + * time to stop, and use this new value instead. + */ + + /* Tell the UART to start sending the break */ + if (!(ch->ch_flags & CH_BREAK_SENDING)) { + u8 temp = readb(&ch->ch_neo_uart->lcr); + writeb((temp | UART_LCR_SBC), &ch->ch_neo_uart->lcr); + ch->ch_flags |= (CH_BREAK_SENDING); + + /* flush write operation */ + neo_pci_posting_flush(ch->ch_bd); + } +} + +/* + * neo_send_immediate_char. + * + * Sends a specific character as soon as possible to the UART, + * jumping over any bytes that might be in the write queue. + * + * The channel lock MUST be held by the calling function. + */ +static void neo_send_immediate_char(struct jsm_channel *ch, unsigned char c) +{ + if (!ch) + return; + + writeb(c, &ch->ch_neo_uart->txrx); + + /* flush write operation */ + neo_pci_posting_flush(ch->ch_bd); +} + +struct board_ops jsm_neo_ops = { + .intr = neo_intr, + .uart_init = neo_uart_init, + .uart_off = neo_uart_off, + .param = neo_param, + .assert_modem_signals = neo_assert_modem_signals, + .flush_uart_write = neo_flush_uart_write, + .flush_uart_read = neo_flush_uart_read, + .disable_receiver = neo_disable_receiver, + .enable_receiver = neo_enable_receiver, + .send_break = neo_send_break, + .clear_break = neo_clear_break, + .send_start_character = neo_send_start_character, + .send_stop_character = neo_send_stop_character, + .copy_data_from_queue_to_uart = neo_copy_data_from_queue_to_uart, + .get_uart_bytes_left = neo_get_uart_bytes_left, + .send_immediate_char = neo_send_immediate_char +}; diff --git a/drivers/tty/serial/jsm/jsm_tty.c b/drivers/tty/serial/jsm/jsm_tty.c new file mode 100644 index 000000000..8438454ca --- /dev/null +++ b/drivers/tty/serial/jsm/jsm_tty.c @@ -0,0 +1,823 @@ +// SPDX-License-Identifier: GPL-2.0+ +/************************************************************************ + * Copyright 2003 Digi International (www.digi.com) + * + * Copyright (C) 2004 IBM Corporation. All rights reserved. + * + * Contact Information: + * Scott H Kilau + * Ananda Venkatarman + * Modifications: + * 01/19/06: changed jsm_input routine to use the dynamically allocated + * tty_buffer changes. Contributors: Scott Kilau and Ananda V. + ***********************************************************************/ +#include +#include +#include +#include /* For udelay */ +#include +#include + +#include "jsm.h" + +static DECLARE_BITMAP(linemap, MAXLINES); + +static void jsm_carrier(struct jsm_channel *ch); + +static inline int jsm_get_mstat(struct jsm_channel *ch) +{ + unsigned char mstat; + int result; + + jsm_dbg(IOCTL, &ch->ch_bd->pci_dev, "start\n"); + + mstat = (ch->ch_mostat | ch->ch_mistat); + + result = 0; + + if (mstat & UART_MCR_DTR) + result |= TIOCM_DTR; + if (mstat & UART_MCR_RTS) + result |= TIOCM_RTS; + if (mstat & UART_MSR_CTS) + result |= TIOCM_CTS; + if (mstat & UART_MSR_DSR) + result |= TIOCM_DSR; + if (mstat & UART_MSR_RI) + result |= TIOCM_RI; + if (mstat & UART_MSR_DCD) + result |= TIOCM_CD; + + jsm_dbg(IOCTL, &ch->ch_bd->pci_dev, "finish\n"); + return result; +} + +static unsigned int jsm_tty_tx_empty(struct uart_port *port) +{ + return TIOCSER_TEMT; +} + +/* + * Return modem signals to ld. + */ +static unsigned int jsm_tty_get_mctrl(struct uart_port *port) +{ + int result; + struct jsm_channel *channel = + container_of(port, struct jsm_channel, uart_port); + + jsm_dbg(IOCTL, &channel->ch_bd->pci_dev, "start\n"); + + result = jsm_get_mstat(channel); + + if (result < 0) + return -ENXIO; + + jsm_dbg(IOCTL, &channel->ch_bd->pci_dev, "finish\n"); + + return result; +} + +/* + * jsm_set_modem_info() + * + * Set modem signals, called by ld. + */ +static void jsm_tty_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct jsm_channel *channel = + container_of(port, struct jsm_channel, uart_port); + + jsm_dbg(IOCTL, &channel->ch_bd->pci_dev, "start\n"); + + if (mctrl & TIOCM_RTS) + channel->ch_mostat |= UART_MCR_RTS; + else + channel->ch_mostat &= ~UART_MCR_RTS; + + if (mctrl & TIOCM_DTR) + channel->ch_mostat |= UART_MCR_DTR; + else + channel->ch_mostat &= ~UART_MCR_DTR; + + channel->ch_bd->bd_ops->assert_modem_signals(channel); + + jsm_dbg(IOCTL, &channel->ch_bd->pci_dev, "finish\n"); + udelay(10); +} + +/* + * jsm_tty_write() + * + * Take data from the user or kernel and send it out to the FEP. + * In here exists all the Transparent Print magic as well. + */ +static void jsm_tty_write(struct uart_port *port) +{ + struct jsm_channel *channel; + + channel = container_of(port, struct jsm_channel, uart_port); + channel->ch_bd->bd_ops->copy_data_from_queue_to_uart(channel); +} + +static void jsm_tty_start_tx(struct uart_port *port) +{ + struct jsm_channel *channel = + container_of(port, struct jsm_channel, uart_port); + + jsm_dbg(IOCTL, &channel->ch_bd->pci_dev, "start\n"); + + channel->ch_flags &= ~(CH_STOP); + jsm_tty_write(port); + + jsm_dbg(IOCTL, &channel->ch_bd->pci_dev, "finish\n"); +} + +static void jsm_tty_stop_tx(struct uart_port *port) +{ + struct jsm_channel *channel = + container_of(port, struct jsm_channel, uart_port); + + jsm_dbg(IOCTL, &channel->ch_bd->pci_dev, "start\n"); + + channel->ch_flags |= (CH_STOP); + + jsm_dbg(IOCTL, &channel->ch_bd->pci_dev, "finish\n"); +} + +static void jsm_tty_send_xchar(struct uart_port *port, char ch) +{ + unsigned long lock_flags; + struct jsm_channel *channel = + container_of(port, struct jsm_channel, uart_port); + struct ktermios *termios; + + spin_lock_irqsave(&port->lock, lock_flags); + termios = &port->state->port.tty->termios; + if (ch == termios->c_cc[VSTART]) + channel->ch_bd->bd_ops->send_start_character(channel); + + if (ch == termios->c_cc[VSTOP]) + channel->ch_bd->bd_ops->send_stop_character(channel); + spin_unlock_irqrestore(&port->lock, lock_flags); +} + +static void jsm_tty_stop_rx(struct uart_port *port) +{ + struct jsm_channel *channel = + container_of(port, struct jsm_channel, uart_port); + + channel->ch_bd->bd_ops->disable_receiver(channel); +} + +static void jsm_tty_break(struct uart_port *port, int break_state) +{ + unsigned long lock_flags; + struct jsm_channel *channel = + container_of(port, struct jsm_channel, uart_port); + + spin_lock_irqsave(&port->lock, lock_flags); + if (break_state == -1) + channel->ch_bd->bd_ops->send_break(channel); + else + channel->ch_bd->bd_ops->clear_break(channel); + + spin_unlock_irqrestore(&port->lock, lock_flags); +} + +static int jsm_tty_open(struct uart_port *port) +{ + unsigned long lock_flags; + struct jsm_board *brd; + struct jsm_channel *channel = + container_of(port, struct jsm_channel, uart_port); + struct ktermios *termios; + + /* Get board pointer from our array of majors we have allocated */ + brd = channel->ch_bd; + + /* + * Allocate channel buffers for read/write/error. + * Set flag, so we don't get trounced on. + */ + channel->ch_flags |= (CH_OPENING); + + /* Drop locks, as malloc with GFP_KERNEL can sleep */ + + if (!channel->ch_rqueue) { + channel->ch_rqueue = kzalloc(RQUEUESIZE, GFP_KERNEL); + if (!channel->ch_rqueue) { + jsm_dbg(INIT, &channel->ch_bd->pci_dev, + "unable to allocate read queue buf\n"); + return -ENOMEM; + } + } + if (!channel->ch_equeue) { + channel->ch_equeue = kzalloc(EQUEUESIZE, GFP_KERNEL); + if (!channel->ch_equeue) { + jsm_dbg(INIT, &channel->ch_bd->pci_dev, + "unable to allocate error queue buf\n"); + return -ENOMEM; + } + } + + channel->ch_flags &= ~(CH_OPENING); + /* + * Initialize if neither terminal is open. + */ + jsm_dbg(OPEN, &channel->ch_bd->pci_dev, + "jsm_open: initializing channel in open...\n"); + + /* + * Flush input queues. + */ + channel->ch_r_head = channel->ch_r_tail = 0; + channel->ch_e_head = channel->ch_e_tail = 0; + + brd->bd_ops->flush_uart_write(channel); + brd->bd_ops->flush_uart_read(channel); + + channel->ch_flags = 0; + channel->ch_cached_lsr = 0; + channel->ch_stops_sent = 0; + + spin_lock_irqsave(&port->lock, lock_flags); + termios = &port->state->port.tty->termios; + channel->ch_c_cflag = termios->c_cflag; + channel->ch_c_iflag = termios->c_iflag; + channel->ch_c_oflag = termios->c_oflag; + channel->ch_c_lflag = termios->c_lflag; + channel->ch_startc = termios->c_cc[VSTART]; + channel->ch_stopc = termios->c_cc[VSTOP]; + + /* Tell UART to init itself */ + brd->bd_ops->uart_init(channel); + + /* + * Run param in case we changed anything + */ + brd->bd_ops->param(channel); + + jsm_carrier(channel); + + channel->ch_open_count++; + spin_unlock_irqrestore(&port->lock, lock_flags); + + jsm_dbg(OPEN, &channel->ch_bd->pci_dev, "finish\n"); + return 0; +} + +static void jsm_tty_close(struct uart_port *port) +{ + struct jsm_board *bd; + struct jsm_channel *channel = + container_of(port, struct jsm_channel, uart_port); + + jsm_dbg(CLOSE, &channel->ch_bd->pci_dev, "start\n"); + + bd = channel->ch_bd; + + channel->ch_flags &= ~(CH_STOPI); + + channel->ch_open_count--; + + /* + * If we have HUPCL set, lower DTR and RTS + */ + if (channel->ch_c_cflag & HUPCL) { + jsm_dbg(CLOSE, &channel->ch_bd->pci_dev, + "Close. HUPCL set, dropping DTR/RTS\n"); + + /* Drop RTS/DTR */ + channel->ch_mostat &= ~(UART_MCR_DTR | UART_MCR_RTS); + bd->bd_ops->assert_modem_signals(channel); + } + + /* Turn off UART interrupts for this port */ + channel->ch_bd->bd_ops->uart_off(channel); + + jsm_dbg(CLOSE, &channel->ch_bd->pci_dev, "finish\n"); +} + +static void jsm_tty_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old_termios) +{ + unsigned long lock_flags; + struct jsm_channel *channel = + container_of(port, struct jsm_channel, uart_port); + + spin_lock_irqsave(&port->lock, lock_flags); + channel->ch_c_cflag = termios->c_cflag; + channel->ch_c_iflag = termios->c_iflag; + channel->ch_c_oflag = termios->c_oflag; + channel->ch_c_lflag = termios->c_lflag; + channel->ch_startc = termios->c_cc[VSTART]; + channel->ch_stopc = termios->c_cc[VSTOP]; + + channel->ch_bd->bd_ops->param(channel); + jsm_carrier(channel); + spin_unlock_irqrestore(&port->lock, lock_flags); +} + +static const char *jsm_tty_type(struct uart_port *port) +{ + return "jsm"; +} + +static void jsm_tty_release_port(struct uart_port *port) +{ +} + +static int jsm_tty_request_port(struct uart_port *port) +{ + return 0; +} + +static void jsm_config_port(struct uart_port *port, int flags) +{ + port->type = PORT_JSM; +} + +static const struct uart_ops jsm_ops = { + .tx_empty = jsm_tty_tx_empty, + .set_mctrl = jsm_tty_set_mctrl, + .get_mctrl = jsm_tty_get_mctrl, + .stop_tx = jsm_tty_stop_tx, + .start_tx = jsm_tty_start_tx, + .send_xchar = jsm_tty_send_xchar, + .stop_rx = jsm_tty_stop_rx, + .break_ctl = jsm_tty_break, + .startup = jsm_tty_open, + .shutdown = jsm_tty_close, + .set_termios = jsm_tty_set_termios, + .type = jsm_tty_type, + .release_port = jsm_tty_release_port, + .request_port = jsm_tty_request_port, + .config_port = jsm_config_port, +}; + +/* + * jsm_tty_init() + * + * Init the tty subsystem. Called once per board after board has been + * downloaded and init'ed. + */ +int jsm_tty_init(struct jsm_board *brd) +{ + int i; + void __iomem *vaddr; + struct jsm_channel *ch; + + if (!brd) + return -ENXIO; + + jsm_dbg(INIT, &brd->pci_dev, "start\n"); + + /* + * Initialize board structure elements. + */ + + brd->nasync = brd->maxports; + + /* + * Allocate channel memory that might not have been allocated + * when the driver was first loaded. + */ + for (i = 0; i < brd->nasync; i++) { + if (!brd->channels[i]) { + + /* + * Okay to malloc with GFP_KERNEL, we are not at + * interrupt context, and there are no locks held. + */ + brd->channels[i] = kzalloc(sizeof(struct jsm_channel), GFP_KERNEL); + if (!brd->channels[i]) { + jsm_dbg(CORE, &brd->pci_dev, + "%s:%d Unable to allocate memory for channel struct\n", + __FILE__, __LINE__); + } + } + } + + ch = brd->channels[0]; + vaddr = brd->re_map_membase; + + /* Set up channel variables */ + for (i = 0; i < brd->nasync; i++, ch = brd->channels[i]) { + + if (!brd->channels[i]) + continue; + + spin_lock_init(&ch->ch_lock); + + if (brd->bd_uart_offset == 0x200) + ch->ch_neo_uart = vaddr + (brd->bd_uart_offset * i); + else + ch->ch_cls_uart = vaddr + (brd->bd_uart_offset * i); + + ch->ch_bd = brd; + ch->ch_portnum = i; + + /* .25 second delay */ + ch->ch_close_delay = 250; + + init_waitqueue_head(&ch->ch_flags_wait); + } + + jsm_dbg(INIT, &brd->pci_dev, "finish\n"); + return 0; +} + +int jsm_uart_port_init(struct jsm_board *brd) +{ + int i, rc; + unsigned int line; + + if (!brd) + return -ENXIO; + + jsm_dbg(INIT, &brd->pci_dev, "start\n"); + + /* + * Initialize board structure elements. + */ + + brd->nasync = brd->maxports; + + /* Set up channel variables */ + for (i = 0; i < brd->nasync; i++) { + + if (!brd->channels[i]) + continue; + + brd->channels[i]->uart_port.irq = brd->irq; + brd->channels[i]->uart_port.uartclk = 14745600; + brd->channels[i]->uart_port.type = PORT_JSM; + brd->channels[i]->uart_port.iotype = UPIO_MEM; + brd->channels[i]->uart_port.membase = brd->re_map_membase; + brd->channels[i]->uart_port.fifosize = 16; + brd->channels[i]->uart_port.ops = &jsm_ops; + line = find_first_zero_bit(linemap, MAXLINES); + if (line >= MAXLINES) { + printk(KERN_INFO "jsm: linemap is full, added device failed\n"); + continue; + } else + set_bit(line, linemap); + brd->channels[i]->uart_port.line = line; + rc = uart_add_one_port(&jsm_uart_driver, &brd->channels[i]->uart_port); + if (rc) { + printk(KERN_INFO "jsm: Port %d failed. Aborting...\n", i); + return rc; + } else + printk(KERN_INFO "jsm: Port %d added\n", i); + } + + jsm_dbg(INIT, &brd->pci_dev, "finish\n"); + return 0; +} + +int jsm_remove_uart_port(struct jsm_board *brd) +{ + int i; + struct jsm_channel *ch; + + if (!brd) + return -ENXIO; + + jsm_dbg(INIT, &brd->pci_dev, "start\n"); + + /* + * Initialize board structure elements. + */ + + brd->nasync = brd->maxports; + + /* Set up channel variables */ + for (i = 0; i < brd->nasync; i++) { + + if (!brd->channels[i]) + continue; + + ch = brd->channels[i]; + + clear_bit(ch->uart_port.line, linemap); + uart_remove_one_port(&jsm_uart_driver, &brd->channels[i]->uart_port); + } + + jsm_dbg(INIT, &brd->pci_dev, "finish\n"); + return 0; +} + +void jsm_input(struct jsm_channel *ch) +{ + struct jsm_board *bd; + struct tty_struct *tp; + struct tty_port *port; + u32 rmask; + u16 head; + u16 tail; + int data_len; + unsigned long lock_flags; + int len = 0; + int s = 0; + int i = 0; + + jsm_dbg(READ, &ch->ch_bd->pci_dev, "start\n"); + + port = &ch->uart_port.state->port; + tp = port->tty; + + bd = ch->ch_bd; + if (!bd) + return; + + spin_lock_irqsave(&ch->ch_lock, lock_flags); + + /* + *Figure the number of characters in the buffer. + *Exit immediately if none. + */ + + rmask = RQUEUEMASK; + + head = ch->ch_r_head & rmask; + tail = ch->ch_r_tail & rmask; + + data_len = (head - tail) & rmask; + if (data_len == 0) { + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + return; + } + + jsm_dbg(READ, &ch->ch_bd->pci_dev, "start\n"); + + /* + *If the device is not open, or CREAD is off, flush + *input data and return immediately. + */ + if (!tp || !C_CREAD(tp)) { + + jsm_dbg(READ, &ch->ch_bd->pci_dev, + "input. dropping %d bytes on port %d...\n", + data_len, ch->ch_portnum); + ch->ch_r_head = tail; + + /* Force queue flow control to be released, if needed */ + jsm_check_queue_flow_control(ch); + + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + return; + } + + /* + * If we are throttled, simply don't read any data. + */ + if (ch->ch_flags & CH_STOPI) { + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + jsm_dbg(READ, &ch->ch_bd->pci_dev, + "Port %d throttled, not reading any data. head: %x tail: %x\n", + ch->ch_portnum, head, tail); + return; + } + + jsm_dbg(READ, &ch->ch_bd->pci_dev, "start 2\n"); + + len = tty_buffer_request_room(port, data_len); + + /* + * len now contains the most amount of data we can copy, + * bounded either by the flip buffer size or the amount + * of data the card actually has pending... + */ + while (len) { + s = ((head >= tail) ? head : RQUEUESIZE) - tail; + s = min(s, len); + + if (s <= 0) + break; + + /* + * If conditions are such that ld needs to see all + * UART errors, we will have to walk each character + * and error byte and send them to the buffer one at + * a time. + */ + + if (I_PARMRK(tp) || I_BRKINT(tp) || I_INPCK(tp)) { + for (i = 0; i < s; i++) { + /* + * Give the Linux ld the flags in the + * format it likes. + */ + if (*(ch->ch_equeue +tail +i) & UART_LSR_BI) + tty_insert_flip_char(port, *(ch->ch_rqueue +tail +i), TTY_BREAK); + else if (*(ch->ch_equeue +tail +i) & UART_LSR_PE) + tty_insert_flip_char(port, *(ch->ch_rqueue +tail +i), TTY_PARITY); + else if (*(ch->ch_equeue +tail +i) & UART_LSR_FE) + tty_insert_flip_char(port, *(ch->ch_rqueue +tail +i), TTY_FRAME); + else + tty_insert_flip_char(port, *(ch->ch_rqueue +tail +i), TTY_NORMAL); + } + } else { + tty_insert_flip_string(port, ch->ch_rqueue + tail, s); + } + tail += s; + len -= s; + /* Flip queue if needed */ + tail &= rmask; + } + + ch->ch_r_tail = tail & rmask; + ch->ch_e_tail = tail & rmask; + jsm_check_queue_flow_control(ch); + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + + /* Tell the tty layer its okay to "eat" the data now */ + tty_flip_buffer_push(port); + + jsm_dbg(IOCTL, &ch->ch_bd->pci_dev, "finish\n"); +} + +static void jsm_carrier(struct jsm_channel *ch) +{ + struct jsm_board *bd; + + int virt_carrier = 0; + int phys_carrier = 0; + + jsm_dbg(CARR, &ch->ch_bd->pci_dev, "start\n"); + + bd = ch->ch_bd; + if (!bd) + return; + + if (ch->ch_mistat & UART_MSR_DCD) { + jsm_dbg(CARR, &ch->ch_bd->pci_dev, "mistat: %x D_CD: %x\n", + ch->ch_mistat, ch->ch_mistat & UART_MSR_DCD); + phys_carrier = 1; + } + + if (ch->ch_c_cflag & CLOCAL) + virt_carrier = 1; + + jsm_dbg(CARR, &ch->ch_bd->pci_dev, "DCD: physical: %d virt: %d\n", + phys_carrier, virt_carrier); + + /* + * Test for a VIRTUAL carrier transition to HIGH. + */ + if (((ch->ch_flags & CH_FCAR) == 0) && (virt_carrier == 1)) { + + /* + * When carrier rises, wake any threads waiting + * for carrier in the open routine. + */ + + jsm_dbg(CARR, &ch->ch_bd->pci_dev, "carrier: virt DCD rose\n"); + + if (waitqueue_active(&(ch->ch_flags_wait))) + wake_up_interruptible(&ch->ch_flags_wait); + } + + /* + * Test for a PHYSICAL carrier transition to HIGH. + */ + if (((ch->ch_flags & CH_CD) == 0) && (phys_carrier == 1)) { + + /* + * When carrier rises, wake any threads waiting + * for carrier in the open routine. + */ + + jsm_dbg(CARR, &ch->ch_bd->pci_dev, + "carrier: physical DCD rose\n"); + + if (waitqueue_active(&(ch->ch_flags_wait))) + wake_up_interruptible(&ch->ch_flags_wait); + } + + /* + * Test for a PHYSICAL transition to low, so long as we aren't + * currently ignoring physical transitions (which is what "virtual + * carrier" indicates). + * + * The transition of the virtual carrier to low really doesn't + * matter... it really only means "ignore carrier state", not + * "make pretend that carrier is there". + */ + if ((virt_carrier == 0) && ((ch->ch_flags & CH_CD) != 0) + && (phys_carrier == 0)) { + /* + * When carrier drops: + * + * Drop carrier on all open units. + * + * Flush queues, waking up any task waiting in the + * line discipline. + * + * Send a hangup to the control terminal. + * + * Enable all select calls. + */ + if (waitqueue_active(&(ch->ch_flags_wait))) + wake_up_interruptible(&ch->ch_flags_wait); + } + + /* + * Make sure that our cached values reflect the current reality. + */ + if (virt_carrier == 1) + ch->ch_flags |= CH_FCAR; + else + ch->ch_flags &= ~CH_FCAR; + + if (phys_carrier == 1) + ch->ch_flags |= CH_CD; + else + ch->ch_flags &= ~CH_CD; +} + + +void jsm_check_queue_flow_control(struct jsm_channel *ch) +{ + struct board_ops *bd_ops = ch->ch_bd->bd_ops; + int qleft; + + /* Store how much space we have left in the queue */ + if ((qleft = ch->ch_r_tail - ch->ch_r_head - 1) < 0) + qleft += RQUEUEMASK + 1; + + /* + * Check to see if we should enforce flow control on our queue because + * the ld (or user) isn't reading data out of our queue fast enuf. + * + * NOTE: This is done based on what the current flow control of the + * port is set for. + * + * 1) HWFLOW (RTS) - Turn off the UART's Receive interrupt. + * This will cause the UART's FIFO to back up, and force + * the RTS signal to be dropped. + * 2) SWFLOW (IXOFF) - Keep trying to send a stop character to + * the other side, in hopes it will stop sending data to us. + * 3) NONE - Nothing we can do. We will simply drop any extra data + * that gets sent into us when the queue fills up. + */ + if (qleft < 256) { + /* HWFLOW */ + if (ch->ch_c_cflag & CRTSCTS) { + if (!(ch->ch_flags & CH_RECEIVER_OFF)) { + bd_ops->disable_receiver(ch); + ch->ch_flags |= (CH_RECEIVER_OFF); + jsm_dbg(READ, &ch->ch_bd->pci_dev, + "Internal queue hit hilevel mark (%d)! Turning off interrupts\n", + qleft); + } + } + /* SWFLOW */ + else if (ch->ch_c_iflag & IXOFF) { + if (ch->ch_stops_sent <= MAX_STOPS_SENT) { + bd_ops->send_stop_character(ch); + ch->ch_stops_sent++; + jsm_dbg(READ, &ch->ch_bd->pci_dev, + "Sending stop char! Times sent: %x\n", + ch->ch_stops_sent); + } + } + } + + /* + * Check to see if we should unenforce flow control because + * ld (or user) finally read enuf data out of our queue. + * + * NOTE: This is done based on what the current flow control of the + * port is set for. + * + * 1) HWFLOW (RTS) - Turn back on the UART's Receive interrupt. + * This will cause the UART's FIFO to raise RTS back up, + * which will allow the other side to start sending data again. + * 2) SWFLOW (IXOFF) - Send a start character to + * the other side, so it will start sending data to us again. + * 3) NONE - Do nothing. Since we didn't do anything to turn off the + * other side, we don't need to do anything now. + */ + if (qleft > (RQUEUESIZE / 2)) { + /* HWFLOW */ + if (ch->ch_c_cflag & CRTSCTS) { + if (ch->ch_flags & CH_RECEIVER_OFF) { + bd_ops->enable_receiver(ch); + ch->ch_flags &= ~(CH_RECEIVER_OFF); + jsm_dbg(READ, &ch->ch_bd->pci_dev, + "Internal queue hit lowlevel mark (%d)! Turning on interrupts\n", + qleft); + } + } + /* SWFLOW */ + else if (ch->ch_c_iflag & IXOFF && ch->ch_stops_sent) { + ch->ch_stops_sent = 0; + bd_ops->send_start_character(ch); + jsm_dbg(READ, &ch->ch_bd->pci_dev, + "Sending start char!\n"); + } + } +} diff --git a/drivers/tty/serial/kgdb_nmi.c b/drivers/tty/serial/kgdb_nmi.c new file mode 100644 index 000000000..6004c0c1d --- /dev/null +++ b/drivers/tty/serial/kgdb_nmi.c @@ -0,0 +1,383 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * KGDB NMI serial console + * + * Copyright 2010 Google, Inc. + * Arve HjønnevÃ¥g + * Colin Cross + * Copyright 2012 Linaro Ltd. + * Anton Vorontsov + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static int kgdb_nmi_knock = 1; +module_param_named(knock, kgdb_nmi_knock, int, 0600); +MODULE_PARM_DESC(knock, "if set to 1 (default), the special '$3#33' command " \ + "must be used to enter the debugger; when set to 0, " \ + "hitting return key is enough to enter the debugger; " \ + "when set to -1, the debugger is entered immediately " \ + "upon NMI"); + +static char *kgdb_nmi_magic = "$3#33"; +module_param_named(magic, kgdb_nmi_magic, charp, 0600); +MODULE_PARM_DESC(magic, "magic sequence to enter NMI debugger (default $3#33)"); + +static atomic_t kgdb_nmi_num_readers = ATOMIC_INIT(0); + +static int kgdb_nmi_console_setup(struct console *co, char *options) +{ + arch_kgdb_ops.enable_nmi(1); + + /* The NMI console uses the dbg_io_ops to issue console messages. To + * avoid duplicate messages during kdb sessions we must inform kdb's + * I/O utilities that messages sent to the console will automatically + * be displayed on the dbg_io. + */ + dbg_io_ops->cons = co; + + return 0; +} + +static void kgdb_nmi_console_write(struct console *co, const char *s, uint c) +{ + int i; + + for (i = 0; i < c; i++) + dbg_io_ops->write_char(s[i]); +} + +static struct tty_driver *kgdb_nmi_tty_driver; + +static struct tty_driver *kgdb_nmi_console_device(struct console *co, int *idx) +{ + *idx = co->index; + return kgdb_nmi_tty_driver; +} + +static struct console kgdb_nmi_console = { + .name = "ttyNMI", + .setup = kgdb_nmi_console_setup, + .write = kgdb_nmi_console_write, + .device = kgdb_nmi_console_device, + .flags = CON_PRINTBUFFER | CON_ANYTIME, + .index = -1, +}; + +/* + * This is usually the maximum rate on debug ports. We make fifo large enough + * to make copy-pasting to the terminal usable. + */ +#define KGDB_NMI_BAUD 115200 +#define KGDB_NMI_FIFO_SIZE roundup_pow_of_two(KGDB_NMI_BAUD / 8 / HZ) + +struct kgdb_nmi_tty_priv { + struct tty_port port; + struct timer_list timer; + STRUCT_KFIFO(char, KGDB_NMI_FIFO_SIZE) fifo; +}; + +static struct tty_port *kgdb_nmi_port; + +static void kgdb_tty_recv(int ch) +{ + struct kgdb_nmi_tty_priv *priv; + char c = ch; + + if (!kgdb_nmi_port || ch < 0) + return; + /* + * Can't use port->tty->driver_data as tty might be not there. Timer + * will check for tty and will get the ref, but here we don't have to + * do that, and actually, we can't: we're in NMI context, no locks are + * possible. + */ + priv = container_of(kgdb_nmi_port, struct kgdb_nmi_tty_priv, port); + kfifo_in(&priv->fifo, &c, 1); +} + +static int kgdb_nmi_poll_one_knock(void) +{ + static int n; + int c = -1; + const char *magic = kgdb_nmi_magic; + size_t m = strlen(magic); + bool printch = false; + + c = dbg_io_ops->read_char(); + if (c == NO_POLL_CHAR) + return c; + + if (!kgdb_nmi_knock && (c == '\r' || c == '\n')) { + return 1; + } else if (c == magic[n]) { + n = (n + 1) % m; + if (!n) + return 1; + printch = true; + } else { + n = 0; + } + + if (atomic_read(&kgdb_nmi_num_readers)) { + kgdb_tty_recv(c); + return 0; + } + + if (printch) { + kdb_printf("%c", c); + return 0; + } + + kdb_printf("\r%s %s to enter the debugger> %*s", + kgdb_nmi_knock ? "Type" : "Hit", + kgdb_nmi_knock ? magic : "", (int)m, ""); + while (m--) + kdb_printf("\b"); + return 0; +} + +/** + * kgdb_nmi_poll_knock - Check if it is time to enter the debugger + * + * "Serial ports are often noisy, especially when muxed over another port (we + * often use serial over the headset connector). Noise on the async command + * line just causes characters that are ignored, on a command line that blocked + * execution noise would be catastrophic." -- Colin Cross + * + * So, this function implements KGDB/KDB knocking on the serial line: we won't + * enter the debugger until we receive a known magic phrase (which is actually + * "$3#33", known as "escape to KDB" command. There is also a relaxed variant + * of knocking, i.e. just pressing the return key is enough to enter the + * debugger. And if knocking is disabled, the function always returns 1. + */ +bool kgdb_nmi_poll_knock(void) +{ + if (kgdb_nmi_knock < 0) + return true; + + while (1) { + int ret; + + ret = kgdb_nmi_poll_one_knock(); + if (ret == NO_POLL_CHAR) + return false; + else if (ret == 1) + break; + } + return true; +} + +/* + * The tasklet is cheap, it does not cause wakeups when reschedules itself, + * instead it waits for the next tick. + */ +static void kgdb_nmi_tty_receiver(struct timer_list *t) +{ + struct kgdb_nmi_tty_priv *priv = from_timer(priv, t, timer); + char ch; + + priv->timer.expires = jiffies + (HZ/100); + add_timer(&priv->timer); + + if (likely(!atomic_read(&kgdb_nmi_num_readers) || + !kfifo_len(&priv->fifo))) + return; + + while (kfifo_out(&priv->fifo, &ch, 1)) + tty_insert_flip_char(&priv->port, ch, TTY_NORMAL); + tty_flip_buffer_push(&priv->port); +} + +static int kgdb_nmi_tty_activate(struct tty_port *port, struct tty_struct *tty) +{ + struct kgdb_nmi_tty_priv *priv = + container_of(port, struct kgdb_nmi_tty_priv, port); + + kgdb_nmi_port = port; + priv->timer.expires = jiffies + (HZ/100); + add_timer(&priv->timer); + + return 0; +} + +static void kgdb_nmi_tty_shutdown(struct tty_port *port) +{ + struct kgdb_nmi_tty_priv *priv = + container_of(port, struct kgdb_nmi_tty_priv, port); + + del_timer(&priv->timer); + kgdb_nmi_port = NULL; +} + +static const struct tty_port_operations kgdb_nmi_tty_port_ops = { + .activate = kgdb_nmi_tty_activate, + .shutdown = kgdb_nmi_tty_shutdown, +}; + +static int kgdb_nmi_tty_install(struct tty_driver *drv, struct tty_struct *tty) +{ + struct kgdb_nmi_tty_priv *priv; + int ret; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + INIT_KFIFO(priv->fifo); + timer_setup(&priv->timer, kgdb_nmi_tty_receiver, 0); + tty_port_init(&priv->port); + priv->port.ops = &kgdb_nmi_tty_port_ops; + tty->driver_data = priv; + + ret = tty_port_install(&priv->port, drv, tty); + if (ret) { + pr_err("%s: can't install tty port: %d\n", __func__, ret); + goto err; + } + return 0; +err: + tty_port_destroy(&priv->port); + kfree(priv); + return ret; +} + +static void kgdb_nmi_tty_cleanup(struct tty_struct *tty) +{ + struct kgdb_nmi_tty_priv *priv = tty->driver_data; + + tty->driver_data = NULL; + tty_port_destroy(&priv->port); + kfree(priv); +} + +static int kgdb_nmi_tty_open(struct tty_struct *tty, struct file *file) +{ + struct kgdb_nmi_tty_priv *priv = tty->driver_data; + unsigned int mode = file->f_flags & O_ACCMODE; + int ret; + + ret = tty_port_open(&priv->port, tty, file); + if (!ret && (mode == O_RDONLY || mode == O_RDWR)) + atomic_inc(&kgdb_nmi_num_readers); + + return ret; +} + +static void kgdb_nmi_tty_close(struct tty_struct *tty, struct file *file) +{ + struct kgdb_nmi_tty_priv *priv = tty->driver_data; + unsigned int mode = file->f_flags & O_ACCMODE; + + if (mode == O_RDONLY || mode == O_RDWR) + atomic_dec(&kgdb_nmi_num_readers); + + tty_port_close(&priv->port, tty, file); +} + +static void kgdb_nmi_tty_hangup(struct tty_struct *tty) +{ + struct kgdb_nmi_tty_priv *priv = tty->driver_data; + + tty_port_hangup(&priv->port); +} + +static int kgdb_nmi_tty_write_room(struct tty_struct *tty) +{ + /* Actually, we can handle any amount as we use polled writes. */ + return 2048; +} + +static int kgdb_nmi_tty_write(struct tty_struct *tty, const unchar *buf, int c) +{ + int i; + + for (i = 0; i < c; i++) + dbg_io_ops->write_char(buf[i]); + return c; +} + +static const struct tty_operations kgdb_nmi_tty_ops = { + .open = kgdb_nmi_tty_open, + .close = kgdb_nmi_tty_close, + .install = kgdb_nmi_tty_install, + .cleanup = kgdb_nmi_tty_cleanup, + .hangup = kgdb_nmi_tty_hangup, + .write_room = kgdb_nmi_tty_write_room, + .write = kgdb_nmi_tty_write, +}; + +int kgdb_register_nmi_console(void) +{ + int ret; + + if (!arch_kgdb_ops.enable_nmi) + return 0; + + kgdb_nmi_tty_driver = alloc_tty_driver(1); + if (!kgdb_nmi_tty_driver) { + pr_err("%s: cannot allocate tty\n", __func__); + return -ENOMEM; + } + kgdb_nmi_tty_driver->driver_name = "ttyNMI"; + kgdb_nmi_tty_driver->name = "ttyNMI"; + kgdb_nmi_tty_driver->num = 1; + kgdb_nmi_tty_driver->type = TTY_DRIVER_TYPE_SERIAL; + kgdb_nmi_tty_driver->subtype = SERIAL_TYPE_NORMAL; + kgdb_nmi_tty_driver->flags = TTY_DRIVER_REAL_RAW; + kgdb_nmi_tty_driver->init_termios = tty_std_termios; + tty_termios_encode_baud_rate(&kgdb_nmi_tty_driver->init_termios, + KGDB_NMI_BAUD, KGDB_NMI_BAUD); + tty_set_operations(kgdb_nmi_tty_driver, &kgdb_nmi_tty_ops); + + ret = tty_register_driver(kgdb_nmi_tty_driver); + if (ret) { + pr_err("%s: can't register tty driver: %d\n", __func__, ret); + goto err_drv_reg; + } + + register_console(&kgdb_nmi_console); + + return 0; +err_drv_reg: + put_tty_driver(kgdb_nmi_tty_driver); + return ret; +} +EXPORT_SYMBOL_GPL(kgdb_register_nmi_console); + +int kgdb_unregister_nmi_console(void) +{ + int ret; + + if (!arch_kgdb_ops.enable_nmi) + return 0; + arch_kgdb_ops.enable_nmi(0); + + ret = unregister_console(&kgdb_nmi_console); + if (ret) + return ret; + + ret = tty_unregister_driver(kgdb_nmi_tty_driver); + if (ret) + return ret; + put_tty_driver(kgdb_nmi_tty_driver); + + return 0; +} +EXPORT_SYMBOL_GPL(kgdb_unregister_nmi_console); diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c new file mode 100644 index 000000000..79b7db858 --- /dev/null +++ b/drivers/tty/serial/kgdboc.c @@ -0,0 +1,604 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Based on the same principle as kgdboe using the NETPOLL api, this + * driver uses a console polling api to implement a gdb serial inteface + * which is multiplexed on a console port. + * + * Maintainer: Jason Wessel + * + * 2007-2008 (c) Jason Wessel - Wind River Systems, Inc. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MAX_CONFIG_LEN 40 + +static struct kgdb_io kgdboc_io_ops; + +/* -1 = init not run yet, 0 = unconfigured, 1 = configured. */ +static int configured = -1; +static DEFINE_MUTEX(config_mutex); + +static char config[MAX_CONFIG_LEN]; +static struct kparam_string kps = { + .string = config, + .maxlen = MAX_CONFIG_LEN, +}; + +static int kgdboc_use_kms; /* 1 if we use kernel mode switching */ +static struct tty_driver *kgdb_tty_driver; +static int kgdb_tty_line; + +static struct platform_device *kgdboc_pdev; + +#if IS_BUILTIN(CONFIG_KGDB_SERIAL_CONSOLE) +static struct kgdb_io kgdboc_earlycon_io_ops; +static int (*earlycon_orig_exit)(struct console *con); +#endif /* IS_BUILTIN(CONFIG_KGDB_SERIAL_CONSOLE) */ + +#ifdef CONFIG_KDB_KEYBOARD +static int kgdboc_reset_connect(struct input_handler *handler, + struct input_dev *dev, + const struct input_device_id *id) +{ + input_reset_device(dev); + + /* Return an error - we do not want to bind, just to reset */ + return -ENODEV; +} + +static void kgdboc_reset_disconnect(struct input_handle *handle) +{ + /* We do not expect anyone to actually bind to us */ + BUG(); +} + +static const struct input_device_id kgdboc_reset_ids[] = { + { + .flags = INPUT_DEVICE_ID_MATCH_EVBIT, + .evbit = { BIT_MASK(EV_KEY) }, + }, + { } +}; + +static struct input_handler kgdboc_reset_handler = { + .connect = kgdboc_reset_connect, + .disconnect = kgdboc_reset_disconnect, + .name = "kgdboc_reset", + .id_table = kgdboc_reset_ids, +}; + +static DEFINE_MUTEX(kgdboc_reset_mutex); + +static void kgdboc_restore_input_helper(struct work_struct *dummy) +{ + /* + * We need to take a mutex to prevent several instances of + * this work running on different CPUs so they don't try + * to register again already registered handler. + */ + mutex_lock(&kgdboc_reset_mutex); + + if (input_register_handler(&kgdboc_reset_handler) == 0) + input_unregister_handler(&kgdboc_reset_handler); + + mutex_unlock(&kgdboc_reset_mutex); +} + +static DECLARE_WORK(kgdboc_restore_input_work, kgdboc_restore_input_helper); + +static void kgdboc_restore_input(void) +{ + if (likely(system_state == SYSTEM_RUNNING)) + schedule_work(&kgdboc_restore_input_work); +} + +static int kgdboc_register_kbd(char **cptr) +{ + if (strncmp(*cptr, "kbd", 3) == 0 || + strncmp(*cptr, "kdb", 3) == 0) { + if (kdb_poll_idx < KDB_POLL_FUNC_MAX) { + kdb_poll_funcs[kdb_poll_idx] = kdb_get_kbd_char; + kdb_poll_idx++; + if (cptr[0][3] == ',') + *cptr += 4; + else + return 1; + } + } + return 0; +} + +static void kgdboc_unregister_kbd(void) +{ + int i; + + for (i = 0; i < kdb_poll_idx; i++) { + if (kdb_poll_funcs[i] == kdb_get_kbd_char) { + kdb_poll_idx--; + kdb_poll_funcs[i] = kdb_poll_funcs[kdb_poll_idx]; + kdb_poll_funcs[kdb_poll_idx] = NULL; + i--; + } + } + flush_work(&kgdboc_restore_input_work); +} +#else /* ! CONFIG_KDB_KEYBOARD */ +#define kgdboc_register_kbd(x) 0 +#define kgdboc_unregister_kbd() +#define kgdboc_restore_input() +#endif /* ! CONFIG_KDB_KEYBOARD */ + +#if IS_BUILTIN(CONFIG_KGDB_SERIAL_CONSOLE) +static void cleanup_earlycon(void) +{ + if (kgdboc_earlycon_io_ops.cons) + kgdb_unregister_io_module(&kgdboc_earlycon_io_ops); +} +#else /* !IS_BUILTIN(CONFIG_KGDB_SERIAL_CONSOLE) */ +static inline void cleanup_earlycon(void) { } +#endif /* !IS_BUILTIN(CONFIG_KGDB_SERIAL_CONSOLE) */ + +static void cleanup_kgdboc(void) +{ + cleanup_earlycon(); + + if (configured != 1) + return; + + if (kgdb_unregister_nmi_console()) + return; + kgdboc_unregister_kbd(); + kgdb_unregister_io_module(&kgdboc_io_ops); +} + +static int configure_kgdboc(void) +{ + struct tty_driver *p; + int tty_line = 0; + int err = -ENODEV; + char *cptr = config; + struct console *cons; + + if (!strlen(config) || isspace(config[0])) { + err = 0; + goto noconfig; + } + + kgdboc_io_ops.cons = NULL; + kgdb_tty_driver = NULL; + + kgdboc_use_kms = 0; + if (strncmp(cptr, "kms,", 4) == 0) { + cptr += 4; + kgdboc_use_kms = 1; + } + + if (kgdboc_register_kbd(&cptr)) + goto do_register; + + p = tty_find_polling_driver(cptr, &tty_line); + if (!p) + goto noconfig; + + for_each_console(cons) { + int idx; + if (cons->device && cons->device(cons, &idx) == p && + idx == tty_line) { + kgdboc_io_ops.cons = cons; + break; + } + } + + kgdb_tty_driver = p; + kgdb_tty_line = tty_line; + +do_register: + err = kgdb_register_io_module(&kgdboc_io_ops); + if (err) + goto noconfig; + + err = kgdb_register_nmi_console(); + if (err) + goto nmi_con_failed; + + configured = 1; + + return 0; + +nmi_con_failed: + kgdb_unregister_io_module(&kgdboc_io_ops); +noconfig: + kgdboc_unregister_kbd(); + configured = 0; + + return err; +} + +static int kgdboc_probe(struct platform_device *pdev) +{ + int ret = 0; + + mutex_lock(&config_mutex); + if (configured != 1) { + ret = configure_kgdboc(); + + /* Convert "no device" to "defer" so we'll keep trying */ + if (ret == -ENODEV) + ret = -EPROBE_DEFER; + } + mutex_unlock(&config_mutex); + + return ret; +} + +static struct platform_driver kgdboc_platform_driver = { + .probe = kgdboc_probe, + .driver = { + .name = "kgdboc", + .suppress_bind_attrs = true, + }, +}; + +static int __init init_kgdboc(void) +{ + int ret; + + /* + * kgdboc is a little bit of an odd "platform_driver". It can be + * up and running long before the platform_driver object is + * created and thus doesn't actually store anything in it. There's + * only one instance of kgdb so anything is stored as global state. + * The platform_driver is only created so that we can leverage the + * kernel's mechanisms (like -EPROBE_DEFER) to call us when our + * underlying tty is ready. Here we init our platform driver and + * then create the single kgdboc instance. + */ + ret = platform_driver_register(&kgdboc_platform_driver); + if (ret) + return ret; + + kgdboc_pdev = platform_device_alloc("kgdboc", PLATFORM_DEVID_NONE); + if (!kgdboc_pdev) { + ret = -ENOMEM; + goto err_did_register; + } + + ret = platform_device_add(kgdboc_pdev); + if (!ret) + return 0; + + platform_device_put(kgdboc_pdev); + +err_did_register: + platform_driver_unregister(&kgdboc_platform_driver); + return ret; +} + +static void exit_kgdboc(void) +{ + mutex_lock(&config_mutex); + cleanup_kgdboc(); + mutex_unlock(&config_mutex); + + platform_device_unregister(kgdboc_pdev); + platform_driver_unregister(&kgdboc_platform_driver); +} + +static int kgdboc_get_char(void) +{ + if (!kgdb_tty_driver) + return -1; + return kgdb_tty_driver->ops->poll_get_char(kgdb_tty_driver, + kgdb_tty_line); +} + +static void kgdboc_put_char(u8 chr) +{ + if (!kgdb_tty_driver) + return; + kgdb_tty_driver->ops->poll_put_char(kgdb_tty_driver, + kgdb_tty_line, chr); +} + +static int param_set_kgdboc_var(const char *kmessage, + const struct kernel_param *kp) +{ + size_t len = strlen(kmessage); + int ret = 0; + + if (len >= MAX_CONFIG_LEN) { + pr_err("config string too long\n"); + return -ENOSPC; + } + + if (kgdb_connected) { + pr_err("Cannot reconfigure while KGDB is connected.\n"); + return -EBUSY; + } + + mutex_lock(&config_mutex); + + strcpy(config, kmessage); + /* Chop out \n char as a result of echo */ + if (len && config[len - 1] == '\n') + config[len - 1] = '\0'; + + if (configured == 1) + cleanup_kgdboc(); + + /* + * Configure with the new params as long as init already ran. + * Note that we can get called before init if someone loads us + * with "modprobe kgdboc kgdboc=..." or if they happen to use the + * the odd syntax of "kgdboc.kgdboc=..." on the kernel command. + */ + if (configured >= 0) + ret = configure_kgdboc(); + + /* + * If we couldn't configure then clear out the config. Note that + * specifying an invalid config on the kernel command line vs. + * through sysfs have slightly different behaviors. If we fail + * to configure what was specified on the kernel command line + * we'll leave it in the 'config' and return -EPROBE_DEFER from + * our probe. When specified through sysfs userspace is + * responsible for loading the tty driver before setting up. + */ + if (ret) + config[0] = '\0'; + + mutex_unlock(&config_mutex); + + return ret; +} + +static int dbg_restore_graphics; + +static void kgdboc_pre_exp_handler(void) +{ + if (!dbg_restore_graphics && kgdboc_use_kms) { + dbg_restore_graphics = 1; + con_debug_enter(vc_cons[fg_console].d); + } + /* Increment the module count when the debugger is active */ + if (!kgdb_connected) + try_module_get(THIS_MODULE); +} + +static void kgdboc_post_exp_handler(void) +{ + /* decrement the module count when the debugger detaches */ + if (!kgdb_connected) + module_put(THIS_MODULE); + if (kgdboc_use_kms && dbg_restore_graphics) { + dbg_restore_graphics = 0; + con_debug_leave(); + } + kgdboc_restore_input(); +} + +static struct kgdb_io kgdboc_io_ops = { + .name = "kgdboc", + .read_char = kgdboc_get_char, + .write_char = kgdboc_put_char, + .pre_exception = kgdboc_pre_exp_handler, + .post_exception = kgdboc_post_exp_handler, +}; + +#if IS_BUILTIN(CONFIG_KGDB_SERIAL_CONSOLE) +static int kgdboc_option_setup(char *opt) +{ + if (!opt) { + pr_err("config string not provided\n"); + return 1; + } + + if (strlen(opt) >= MAX_CONFIG_LEN) { + pr_err("config string too long\n"); + return 1; + } + strcpy(config, opt); + + return 1; +} + +__setup("kgdboc=", kgdboc_option_setup); + + +/* This is only available if kgdboc is a built in for early debugging */ +static int __init kgdboc_early_init(char *opt) +{ + kgdboc_option_setup(opt); + configure_kgdboc(); + return 0; +} + +early_param("ekgdboc", kgdboc_early_init); + +static int kgdboc_earlycon_get_char(void) +{ + char c; + + if (!kgdboc_earlycon_io_ops.cons->read(kgdboc_earlycon_io_ops.cons, + &c, 1)) + return NO_POLL_CHAR; + + return c; +} + +static void kgdboc_earlycon_put_char(u8 chr) +{ + kgdboc_earlycon_io_ops.cons->write(kgdboc_earlycon_io_ops.cons, &chr, + 1); +} + +static void kgdboc_earlycon_pre_exp_handler(void) +{ + struct console *con; + static bool already_warned; + + if (already_warned) + return; + + /* + * When the first normal console comes up the kernel will take all + * the boot consoles out of the list. Really, we should stop using + * the boot console when it does that but until a TTY is registered + * we have no other choice so we keep using it. Since not all + * serial drivers might be OK with this, print a warning once per + * boot if we detect this case. + */ + for_each_console(con) + if (con == kgdboc_earlycon_io_ops.cons) + return; + + already_warned = true; + pr_warn("kgdboc_earlycon is still using bootconsole\n"); +} + +static int kgdboc_earlycon_deferred_exit(struct console *con) +{ + /* + * If we get here it means the boot console is going away but we + * don't yet have a suitable replacement. Don't pass through to + * the original exit routine. We'll call it later in our deinit() + * function. For now, restore the original exit() function pointer + * as a sentinal that we've hit this point. + */ + con->exit = earlycon_orig_exit; + + return 0; +} + +static void kgdboc_earlycon_deinit(void) +{ + if (!kgdboc_earlycon_io_ops.cons) + return; + + if (kgdboc_earlycon_io_ops.cons->exit == kgdboc_earlycon_deferred_exit) + /* + * kgdboc_earlycon is exiting but original boot console exit + * was never called (AKA kgdboc_earlycon_deferred_exit() + * didn't ever run). Undo our trap. + */ + kgdboc_earlycon_io_ops.cons->exit = earlycon_orig_exit; + else if (kgdboc_earlycon_io_ops.cons->exit) + /* + * We skipped calling the exit() routine so we could try to + * keep using the boot console even after it went away. We're + * finally done so call the function now. + */ + kgdboc_earlycon_io_ops.cons->exit(kgdboc_earlycon_io_ops.cons); + + kgdboc_earlycon_io_ops.cons = NULL; +} + +static struct kgdb_io kgdboc_earlycon_io_ops = { + .name = "kgdboc_earlycon", + .read_char = kgdboc_earlycon_get_char, + .write_char = kgdboc_earlycon_put_char, + .pre_exception = kgdboc_earlycon_pre_exp_handler, + .deinit = kgdboc_earlycon_deinit, +}; + +#define MAX_CONSOLE_NAME_LEN (sizeof((struct console *) 0)->name) +static char kgdboc_earlycon_param[MAX_CONSOLE_NAME_LEN] __initdata; +static bool kgdboc_earlycon_late_enable __initdata; + +static int __init kgdboc_earlycon_init(char *opt) +{ + struct console *con; + + kdb_init(KDB_INIT_EARLY); + + /* + * Look for a matching console, or if the name was left blank just + * pick the first one we find. + */ + console_lock(); + for_each_console(con) { + if (con->write && con->read && + (con->flags & (CON_BOOT | CON_ENABLED)) && + (!opt || !opt[0] || strcmp(con->name, opt) == 0)) + break; + } + + if (!con) { + /* + * Both earlycon and kgdboc_earlycon are initialized during + * early parameter parsing. We cannot guarantee earlycon gets + * in first and, in any case, on ACPI systems earlycon may + * defer its own initialization (usually to somewhere within + * setup_arch() ). To cope with either of these situations + * we can defer our own initialization to a little later in + * the boot. + */ + if (!kgdboc_earlycon_late_enable) { + pr_info("No suitable earlycon yet, will try later\n"); + if (opt) + strscpy(kgdboc_earlycon_param, opt, + sizeof(kgdboc_earlycon_param)); + kgdboc_earlycon_late_enable = true; + } else { + pr_info("Couldn't find kgdb earlycon\n"); + } + goto unlock; + } + + kgdboc_earlycon_io_ops.cons = con; + pr_info("Going to register kgdb with earlycon '%s'\n", con->name); + if (kgdb_register_io_module(&kgdboc_earlycon_io_ops) != 0) { + kgdboc_earlycon_io_ops.cons = NULL; + pr_info("Failed to register kgdb with earlycon\n"); + } else { + /* Trap exit so we can keep earlycon longer if needed. */ + earlycon_orig_exit = con->exit; + con->exit = kgdboc_earlycon_deferred_exit; + } + +unlock: + console_unlock(); + + /* Non-zero means malformed option so we always return zero */ + return 0; +} + +early_param("kgdboc_earlycon", kgdboc_earlycon_init); + +/* + * This is only intended for the late adoption of an early console. + * + * It is not a reliable way to adopt regular consoles because we can not + * control what order console initcalls are made and, in any case, many + * regular consoles are registered much later in the boot process than + * the console initcalls! + */ +static int __init kgdboc_earlycon_late_init(void) +{ + if (kgdboc_earlycon_late_enable) + kgdboc_earlycon_init(kgdboc_earlycon_param); + return 0; +} +console_initcall(kgdboc_earlycon_late_init); + +#endif /* IS_BUILTIN(CONFIG_KGDB_SERIAL_CONSOLE) */ + +module_init(init_kgdboc); +module_exit(exit_kgdboc); +module_param_call(kgdboc, param_set_kgdboc_var, param_get_string, &kps, 0644); +MODULE_PARM_DESC(kgdboc, "[,baud]"); +MODULE_DESCRIPTION("KGDB Console TTY Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c new file mode 100644 index 000000000..ee5fd4d84 --- /dev/null +++ b/drivers/tty/serial/lantiq.c @@ -0,0 +1,973 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright (C) 2004 Infineon IFAP DC COM CPE + * Copyright (C) 2007 Felix Fietkau + * Copyright (C) 2007 John Crispin + * Copyright (C) 2010 Thomas Langer, + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define PORT_LTQ_ASC 111 +#define MAXPORTS 2 +#define UART_DUMMY_UER_RX 1 +#define DRVNAME "lantiq,asc" +#ifdef __BIG_ENDIAN +#define LTQ_ASC_TBUF (0x0020 + 3) +#define LTQ_ASC_RBUF (0x0024 + 3) +#else +#define LTQ_ASC_TBUF 0x0020 +#define LTQ_ASC_RBUF 0x0024 +#endif +#define LTQ_ASC_FSTAT 0x0048 +#define LTQ_ASC_WHBSTATE 0x0018 +#define LTQ_ASC_STATE 0x0014 +#define LTQ_ASC_IRNCR 0x00F8 +#define LTQ_ASC_CLC 0x0000 +#define LTQ_ASC_ID 0x0008 +#define LTQ_ASC_PISEL 0x0004 +#define LTQ_ASC_TXFCON 0x0044 +#define LTQ_ASC_RXFCON 0x0040 +#define LTQ_ASC_CON 0x0010 +#define LTQ_ASC_BG 0x0050 +#define LTQ_ASC_IRNREN 0x00F4 + +#define ASC_IRNREN_TX 0x1 +#define ASC_IRNREN_RX 0x2 +#define ASC_IRNREN_ERR 0x4 +#define ASC_IRNREN_TX_BUF 0x8 +#define ASC_IRNCR_TIR 0x1 +#define ASC_IRNCR_RIR 0x2 +#define ASC_IRNCR_EIR 0x4 +#define ASC_IRNCR_MASK GENMASK(2, 0) + +#define ASCOPT_CSIZE 0x3 +#define TXFIFO_FL 1 +#define RXFIFO_FL 1 +#define ASCCLC_DISS 0x2 +#define ASCCLC_RMCMASK 0x0000FF00 +#define ASCCLC_RMCOFFSET 8 +#define ASCCON_M_8ASYNC 0x0 +#define ASCCON_M_7ASYNC 0x2 +#define ASCCON_ODD 0x00000020 +#define ASCCON_STP 0x00000080 +#define ASCCON_BRS 0x00000100 +#define ASCCON_FDE 0x00000200 +#define ASCCON_R 0x00008000 +#define ASCCON_FEN 0x00020000 +#define ASCCON_ROEN 0x00080000 +#define ASCCON_TOEN 0x00100000 +#define ASCSTATE_PE 0x00010000 +#define ASCSTATE_FE 0x00020000 +#define ASCSTATE_ROE 0x00080000 +#define ASCSTATE_ANY (ASCSTATE_ROE|ASCSTATE_PE|ASCSTATE_FE) +#define ASCWHBSTATE_CLRREN 0x00000001 +#define ASCWHBSTATE_SETREN 0x00000002 +#define ASCWHBSTATE_CLRPE 0x00000004 +#define ASCWHBSTATE_CLRFE 0x00000008 +#define ASCWHBSTATE_CLRROE 0x00000020 +#define ASCTXFCON_TXFEN 0x0001 +#define ASCTXFCON_TXFFLU 0x0002 +#define ASCTXFCON_TXFITLMASK 0x3F00 +#define ASCTXFCON_TXFITLOFF 8 +#define ASCRXFCON_RXFEN 0x0001 +#define ASCRXFCON_RXFFLU 0x0002 +#define ASCRXFCON_RXFITLMASK 0x3F00 +#define ASCRXFCON_RXFITLOFF 8 +#define ASCFSTAT_RXFFLMASK 0x003F +#define ASCFSTAT_TXFFLMASK 0x3F00 +#define ASCFSTAT_TXFREEMASK 0x3F000000 +#define ASCFSTAT_TXFREEOFF 24 + +static void lqasc_tx_chars(struct uart_port *port); +static struct ltq_uart_port *lqasc_port[MAXPORTS]; +static struct uart_driver lqasc_reg; + +struct ltq_soc_data { + int (*fetch_irq)(struct device *dev, struct ltq_uart_port *ltq_port); + int (*request_irq)(struct uart_port *port); + void (*free_irq)(struct uart_port *port); +}; + +struct ltq_uart_port { + struct uart_port port; + /* clock used to derive divider */ + struct clk *freqclk; + /* clock gating of the ASC core */ + struct clk *clk; + unsigned int tx_irq; + unsigned int rx_irq; + unsigned int err_irq; + unsigned int common_irq; + spinlock_t lock; /* exclusive access for multi core */ + + const struct ltq_soc_data *soc; +}; + +static inline void asc_update_bits(u32 clear, u32 set, void __iomem *reg) +{ + u32 tmp = __raw_readl(reg); + + __raw_writel((tmp & ~clear) | set, reg); +} + +static inline struct +ltq_uart_port *to_ltq_uart_port(struct uart_port *port) +{ + return container_of(port, struct ltq_uart_port, port); +} + +static void +lqasc_stop_tx(struct uart_port *port) +{ + return; +} + +static void +lqasc_start_tx(struct uart_port *port) +{ + unsigned long flags; + struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); + + spin_lock_irqsave(<q_port->lock, flags); + lqasc_tx_chars(port); + spin_unlock_irqrestore(<q_port->lock, flags); + return; +} + +static void +lqasc_stop_rx(struct uart_port *port) +{ + __raw_writel(ASCWHBSTATE_CLRREN, port->membase + LTQ_ASC_WHBSTATE); +} + +static int +lqasc_rx_chars(struct uart_port *port) +{ + struct tty_port *tport = &port->state->port; + unsigned int ch = 0, rsr = 0, fifocnt; + + fifocnt = __raw_readl(port->membase + LTQ_ASC_FSTAT) & + ASCFSTAT_RXFFLMASK; + while (fifocnt--) { + u8 flag = TTY_NORMAL; + ch = readb(port->membase + LTQ_ASC_RBUF); + rsr = (__raw_readl(port->membase + LTQ_ASC_STATE) + & ASCSTATE_ANY) | UART_DUMMY_UER_RX; + tty_flip_buffer_push(tport); + port->icount.rx++; + + /* + * Note that the error handling code is + * out of the main execution path + */ + if (rsr & ASCSTATE_ANY) { + if (rsr & ASCSTATE_PE) { + port->icount.parity++; + asc_update_bits(0, ASCWHBSTATE_CLRPE, + port->membase + LTQ_ASC_WHBSTATE); + } else if (rsr & ASCSTATE_FE) { + port->icount.frame++; + asc_update_bits(0, ASCWHBSTATE_CLRFE, + port->membase + LTQ_ASC_WHBSTATE); + } + if (rsr & ASCSTATE_ROE) { + port->icount.overrun++; + asc_update_bits(0, ASCWHBSTATE_CLRROE, + port->membase + LTQ_ASC_WHBSTATE); + } + + rsr &= port->read_status_mask; + + if (rsr & ASCSTATE_PE) + flag = TTY_PARITY; + else if (rsr & ASCSTATE_FE) + flag = TTY_FRAME; + } + + if ((rsr & port->ignore_status_mask) == 0) + tty_insert_flip_char(tport, ch, flag); + + if (rsr & ASCSTATE_ROE) + /* + * Overrun is special, since it's reported + * immediately, and doesn't affect the current + * character + */ + tty_insert_flip_char(tport, 0, TTY_OVERRUN); + } + + if (ch != 0) + tty_flip_buffer_push(tport); + + return 0; +} + +static void +lqasc_tx_chars(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + if (uart_tx_stopped(port)) { + lqasc_stop_tx(port); + return; + } + + while (((__raw_readl(port->membase + LTQ_ASC_FSTAT) & + ASCFSTAT_TXFREEMASK) >> ASCFSTAT_TXFREEOFF) != 0) { + if (port->x_char) { + writeb(port->x_char, port->membase + LTQ_ASC_TBUF); + port->icount.tx++; + port->x_char = 0; + continue; + } + + if (uart_circ_empty(xmit)) + break; + + writeb(port->state->xmit.buf[port->state->xmit.tail], + port->membase + LTQ_ASC_TBUF); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); +} + +static irqreturn_t +lqasc_tx_int(int irq, void *_port) +{ + unsigned long flags; + struct uart_port *port = (struct uart_port *)_port; + struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); + + spin_lock_irqsave(<q_port->lock, flags); + __raw_writel(ASC_IRNCR_TIR, port->membase + LTQ_ASC_IRNCR); + spin_unlock_irqrestore(<q_port->lock, flags); + lqasc_start_tx(port); + return IRQ_HANDLED; +} + +static irqreturn_t +lqasc_err_int(int irq, void *_port) +{ + unsigned long flags; + struct uart_port *port = (struct uart_port *)_port; + struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); + + spin_lock_irqsave(<q_port->lock, flags); + __raw_writel(ASC_IRNCR_EIR, port->membase + LTQ_ASC_IRNCR); + /* clear any pending interrupts */ + asc_update_bits(0, ASCWHBSTATE_CLRPE | ASCWHBSTATE_CLRFE | + ASCWHBSTATE_CLRROE, port->membase + LTQ_ASC_WHBSTATE); + spin_unlock_irqrestore(<q_port->lock, flags); + return IRQ_HANDLED; +} + +static irqreturn_t +lqasc_rx_int(int irq, void *_port) +{ + unsigned long flags; + struct uart_port *port = (struct uart_port *)_port; + struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); + + spin_lock_irqsave(<q_port->lock, flags); + __raw_writel(ASC_IRNCR_RIR, port->membase + LTQ_ASC_IRNCR); + lqasc_rx_chars(port); + spin_unlock_irqrestore(<q_port->lock, flags); + return IRQ_HANDLED; +} + +static irqreturn_t lqasc_irq(int irq, void *p) +{ + unsigned long flags; + u32 stat; + struct uart_port *port = p; + struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); + + spin_lock_irqsave(<q_port->lock, flags); + stat = readl(port->membase + LTQ_ASC_IRNCR); + spin_unlock_irqrestore(<q_port->lock, flags); + if (!(stat & ASC_IRNCR_MASK)) + return IRQ_NONE; + + if (stat & ASC_IRNCR_TIR) + lqasc_tx_int(irq, p); + + if (stat & ASC_IRNCR_RIR) + lqasc_rx_int(irq, p); + + if (stat & ASC_IRNCR_EIR) + lqasc_err_int(irq, p); + + return IRQ_HANDLED; +} + +static unsigned int +lqasc_tx_empty(struct uart_port *port) +{ + int status; + status = __raw_readl(port->membase + LTQ_ASC_FSTAT) & + ASCFSTAT_TXFFLMASK; + return status ? 0 : TIOCSER_TEMT; +} + +static unsigned int +lqasc_get_mctrl(struct uart_port *port) +{ + return TIOCM_CTS | TIOCM_CAR | TIOCM_DSR; +} + +static void +lqasc_set_mctrl(struct uart_port *port, u_int mctrl) +{ +} + +static void +lqasc_break_ctl(struct uart_port *port, int break_state) +{ +} + +static int +lqasc_startup(struct uart_port *port) +{ + struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); + int retval; + unsigned long flags; + + if (!IS_ERR(ltq_port->clk)) + clk_prepare_enable(ltq_port->clk); + port->uartclk = clk_get_rate(ltq_port->freqclk); + + spin_lock_irqsave(<q_port->lock, flags); + asc_update_bits(ASCCLC_DISS | ASCCLC_RMCMASK, (1 << ASCCLC_RMCOFFSET), + port->membase + LTQ_ASC_CLC); + + __raw_writel(0, port->membase + LTQ_ASC_PISEL); + __raw_writel( + ((TXFIFO_FL << ASCTXFCON_TXFITLOFF) & ASCTXFCON_TXFITLMASK) | + ASCTXFCON_TXFEN | ASCTXFCON_TXFFLU, + port->membase + LTQ_ASC_TXFCON); + __raw_writel( + ((RXFIFO_FL << ASCRXFCON_RXFITLOFF) & ASCRXFCON_RXFITLMASK) + | ASCRXFCON_RXFEN | ASCRXFCON_RXFFLU, + port->membase + LTQ_ASC_RXFCON); + /* make sure other settings are written to hardware before + * setting enable bits + */ + wmb(); + asc_update_bits(0, ASCCON_M_8ASYNC | ASCCON_FEN | ASCCON_TOEN | + ASCCON_ROEN, port->membase + LTQ_ASC_CON); + + spin_unlock_irqrestore(<q_port->lock, flags); + + retval = ltq_port->soc->request_irq(port); + if (retval) + return retval; + + __raw_writel(ASC_IRNREN_RX | ASC_IRNREN_ERR | ASC_IRNREN_TX, + port->membase + LTQ_ASC_IRNREN); + return retval; +} + +static void +lqasc_shutdown(struct uart_port *port) +{ + struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); + unsigned long flags; + + ltq_port->soc->free_irq(port); + + spin_lock_irqsave(<q_port->lock, flags); + __raw_writel(0, port->membase + LTQ_ASC_CON); + asc_update_bits(ASCRXFCON_RXFEN, ASCRXFCON_RXFFLU, + port->membase + LTQ_ASC_RXFCON); + asc_update_bits(ASCTXFCON_TXFEN, ASCTXFCON_TXFFLU, + port->membase + LTQ_ASC_TXFCON); + spin_unlock_irqrestore(<q_port->lock, flags); + if (!IS_ERR(ltq_port->clk)) + clk_disable_unprepare(ltq_port->clk); +} + +static void +lqasc_set_termios(struct uart_port *port, + struct ktermios *new, struct ktermios *old) +{ + unsigned int cflag; + unsigned int iflag; + unsigned int divisor; + unsigned int baud; + unsigned int con = 0; + unsigned long flags; + struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); + + cflag = new->c_cflag; + iflag = new->c_iflag; + + switch (cflag & CSIZE) { + case CS7: + con = ASCCON_M_7ASYNC; + break; + + case CS5: + case CS6: + default: + new->c_cflag &= ~ CSIZE; + new->c_cflag |= CS8; + con = ASCCON_M_8ASYNC; + break; + } + + cflag &= ~CMSPAR; /* Mark/Space parity is not supported */ + + if (cflag & CSTOPB) + con |= ASCCON_STP; + + if (cflag & PARENB) { + if (!(cflag & PARODD)) + con &= ~ASCCON_ODD; + else + con |= ASCCON_ODD; + } + + port->read_status_mask = ASCSTATE_ROE; + if (iflag & INPCK) + port->read_status_mask |= ASCSTATE_FE | ASCSTATE_PE; + + port->ignore_status_mask = 0; + if (iflag & IGNPAR) + port->ignore_status_mask |= ASCSTATE_FE | ASCSTATE_PE; + + if (iflag & IGNBRK) { + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (iflag & IGNPAR) + port->ignore_status_mask |= ASCSTATE_ROE; + } + + if ((cflag & CREAD) == 0) + port->ignore_status_mask |= UART_DUMMY_UER_RX; + + /* set error signals - framing, parity and overrun, enable receiver */ + con |= ASCCON_FEN | ASCCON_TOEN | ASCCON_ROEN; + + spin_lock_irqsave(<q_port->lock, flags); + + /* set up CON */ + asc_update_bits(0, con, port->membase + LTQ_ASC_CON); + + /* Set baud rate - take a divider of 2 into account */ + baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16); + divisor = uart_get_divisor(port, baud); + divisor = divisor / 2 - 1; + + /* disable the baudrate generator */ + asc_update_bits(ASCCON_R, 0, port->membase + LTQ_ASC_CON); + + /* make sure the fractional divider is off */ + asc_update_bits(ASCCON_FDE, 0, port->membase + LTQ_ASC_CON); + + /* set up to use divisor of 2 */ + asc_update_bits(ASCCON_BRS, 0, port->membase + LTQ_ASC_CON); + + /* now we can write the new baudrate into the register */ + __raw_writel(divisor, port->membase + LTQ_ASC_BG); + + /* turn the baudrate generator back on */ + asc_update_bits(0, ASCCON_R, port->membase + LTQ_ASC_CON); + + /* enable rx */ + __raw_writel(ASCWHBSTATE_SETREN, port->membase + LTQ_ASC_WHBSTATE); + + spin_unlock_irqrestore(<q_port->lock, flags); + + /* Don't rewrite B0 */ + if (tty_termios_baud_rate(new)) + tty_termios_encode_baud_rate(new, baud, baud); + + uart_update_timeout(port, cflag, baud); +} + +static const char* +lqasc_type(struct uart_port *port) +{ + if (port->type == PORT_LTQ_ASC) + return DRVNAME; + else + return NULL; +} + +static void +lqasc_release_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + + if (port->flags & UPF_IOREMAP) { + devm_iounmap(&pdev->dev, port->membase); + port->membase = NULL; + } +} + +static int +lqasc_request_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + struct resource *res; + int size; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "cannot obtain I/O memory region"); + return -ENODEV; + } + size = resource_size(res); + + res = devm_request_mem_region(&pdev->dev, res->start, + size, dev_name(&pdev->dev)); + if (!res) { + dev_err(&pdev->dev, "cannot request I/O memory region"); + return -EBUSY; + } + + if (port->flags & UPF_IOREMAP) { + port->membase = devm_ioremap(&pdev->dev, + port->mapbase, size); + if (port->membase == NULL) + return -ENOMEM; + } + return 0; +} + +static void +lqasc_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_LTQ_ASC; + lqasc_request_port(port); + } +} + +static int +lqasc_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + int ret = 0; + if (ser->type != PORT_UNKNOWN && ser->type != PORT_LTQ_ASC) + ret = -EINVAL; + if (ser->irq < 0 || ser->irq >= NR_IRQS) + ret = -EINVAL; + if (ser->baud_base < 9600) + ret = -EINVAL; + return ret; +} + +static const struct uart_ops lqasc_pops = { + .tx_empty = lqasc_tx_empty, + .set_mctrl = lqasc_set_mctrl, + .get_mctrl = lqasc_get_mctrl, + .stop_tx = lqasc_stop_tx, + .start_tx = lqasc_start_tx, + .stop_rx = lqasc_stop_rx, + .break_ctl = lqasc_break_ctl, + .startup = lqasc_startup, + .shutdown = lqasc_shutdown, + .set_termios = lqasc_set_termios, + .type = lqasc_type, + .release_port = lqasc_release_port, + .request_port = lqasc_request_port, + .config_port = lqasc_config_port, + .verify_port = lqasc_verify_port, +}; + +#ifdef CONFIG_SERIAL_LANTIQ_CONSOLE +static void +lqasc_console_putchar(struct uart_port *port, int ch) +{ + int fifofree; + + if (!port->membase) + return; + + do { + fifofree = (__raw_readl(port->membase + LTQ_ASC_FSTAT) + & ASCFSTAT_TXFREEMASK) >> ASCFSTAT_TXFREEOFF; + } while (fifofree == 0); + writeb(ch, port->membase + LTQ_ASC_TBUF); +} + +static void lqasc_serial_port_write(struct uart_port *port, const char *s, + u_int count) +{ + uart_console_write(port, s, count, lqasc_console_putchar); +} + +static void +lqasc_console_write(struct console *co, const char *s, u_int count) +{ + struct ltq_uart_port *ltq_port; + unsigned long flags; + + if (co->index >= MAXPORTS) + return; + + ltq_port = lqasc_port[co->index]; + if (!ltq_port) + return; + + spin_lock_irqsave(<q_port->lock, flags); + lqasc_serial_port_write(<q_port->port, s, count); + spin_unlock_irqrestore(<q_port->lock, flags); +} + +static int __init +lqasc_console_setup(struct console *co, char *options) +{ + struct ltq_uart_port *ltq_port; + struct uart_port *port; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index >= MAXPORTS) + return -ENODEV; + + ltq_port = lqasc_port[co->index]; + if (!ltq_port) + return -ENODEV; + + port = <q_port->port; + + if (!IS_ERR(ltq_port->clk)) + clk_prepare_enable(ltq_port->clk); + + port->uartclk = clk_get_rate(ltq_port->freqclk); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct console lqasc_console = { + .name = "ttyLTQ", + .write = lqasc_console_write, + .device = uart_console_device, + .setup = lqasc_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &lqasc_reg, +}; + +static int __init +lqasc_console_init(void) +{ + register_console(&lqasc_console); + return 0; +} +console_initcall(lqasc_console_init); + +static void lqasc_serial_early_console_write(struct console *co, + const char *s, + u_int count) +{ + struct earlycon_device *dev = co->data; + + lqasc_serial_port_write(&dev->port, s, count); +} + +static int __init +lqasc_serial_early_console_setup(struct earlycon_device *device, + const char *opt) +{ + if (!device->port.membase) + return -ENODEV; + + device->con->write = lqasc_serial_early_console_write; + return 0; +} +OF_EARLYCON_DECLARE(lantiq, "lantiq,asc", lqasc_serial_early_console_setup); +OF_EARLYCON_DECLARE(lantiq, "intel,lgm-asc", lqasc_serial_early_console_setup); + +#define LANTIQ_SERIAL_CONSOLE (&lqasc_console) + +#else + +#define LANTIQ_SERIAL_CONSOLE NULL + +#endif /* CONFIG_SERIAL_LANTIQ_CONSOLE */ + +static struct uart_driver lqasc_reg = { + .owner = THIS_MODULE, + .driver_name = DRVNAME, + .dev_name = "ttyLTQ", + .major = 0, + .minor = 0, + .nr = MAXPORTS, + .cons = LANTIQ_SERIAL_CONSOLE, +}; + +static int fetch_irq_lantiq(struct device *dev, struct ltq_uart_port *ltq_port) +{ + struct uart_port *port = <q_port->port; + struct resource irqres[3]; + int ret; + + ret = of_irq_to_resource_table(dev->of_node, irqres, 3); + if (ret != 3) { + dev_err(dev, + "failed to get IRQs for serial port\n"); + return -ENODEV; + } + ltq_port->tx_irq = irqres[0].start; + ltq_port->rx_irq = irqres[1].start; + ltq_port->err_irq = irqres[2].start; + port->irq = irqres[0].start; + + return 0; +} + +static int request_irq_lantiq(struct uart_port *port) +{ + struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); + int retval; + + retval = request_irq(ltq_port->tx_irq, lqasc_tx_int, + 0, "asc_tx", port); + if (retval) { + dev_err(port->dev, "failed to request asc_tx\n"); + return retval; + } + + retval = request_irq(ltq_port->rx_irq, lqasc_rx_int, + 0, "asc_rx", port); + if (retval) { + dev_err(port->dev, "failed to request asc_rx\n"); + goto err1; + } + + retval = request_irq(ltq_port->err_irq, lqasc_err_int, + 0, "asc_err", port); + if (retval) { + dev_err(port->dev, "failed to request asc_err\n"); + goto err2; + } + return 0; + +err2: + free_irq(ltq_port->rx_irq, port); +err1: + free_irq(ltq_port->tx_irq, port); + return retval; +} + +static void free_irq_lantiq(struct uart_port *port) +{ + struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); + + free_irq(ltq_port->tx_irq, port); + free_irq(ltq_port->rx_irq, port); + free_irq(ltq_port->err_irq, port); +} + +static int fetch_irq_intel(struct device *dev, struct ltq_uart_port *ltq_port) +{ + struct uart_port *port = <q_port->port; + int ret; + + ret = of_irq_get(dev->of_node, 0); + if (ret < 0) { + dev_err(dev, "failed to fetch IRQ for serial port\n"); + return ret; + } + ltq_port->common_irq = ret; + port->irq = ret; + + return 0; +} + +static int request_irq_intel(struct uart_port *port) +{ + struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); + int retval; + + retval = request_irq(ltq_port->common_irq, lqasc_irq, 0, + "asc_irq", port); + if (retval) + dev_err(port->dev, "failed to request asc_irq\n"); + + return retval; +} + +static void free_irq_intel(struct uart_port *port) +{ + struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); + + free_irq(ltq_port->common_irq, port); +} + +static int lqasc_probe(struct platform_device *pdev) +{ + struct device_node *node = pdev->dev.of_node; + struct ltq_uart_port *ltq_port; + struct uart_port *port; + struct resource *mmres; + int line; + int ret; + + mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mmres) { + dev_err(&pdev->dev, + "failed to get memory for serial port\n"); + return -ENODEV; + } + + ltq_port = devm_kzalloc(&pdev->dev, sizeof(struct ltq_uart_port), + GFP_KERNEL); + if (!ltq_port) + return -ENOMEM; + + port = <q_port->port; + + ltq_port->soc = of_device_get_match_data(&pdev->dev); + ret = ltq_port->soc->fetch_irq(&pdev->dev, ltq_port); + if (ret) + return ret; + + /* get serial id */ + line = of_alias_get_id(node, "serial"); + if (line < 0) { + if (IS_ENABLED(CONFIG_LANTIQ)) { + if (mmres->start == CPHYSADDR(LTQ_EARLY_ASC)) + line = 0; + else + line = 1; + } else { + dev_err(&pdev->dev, "failed to get alias id, errno %d\n", + line); + return line; + } + } + + if (lqasc_port[line]) { + dev_err(&pdev->dev, "port %d already allocated\n", line); + return -EBUSY; + } + + port->iotype = SERIAL_IO_MEM; + port->flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP; + port->ops = &lqasc_pops; + port->fifosize = 16; + port->type = PORT_LTQ_ASC, + port->line = line; + port->dev = &pdev->dev; + /* unused, just to be backward-compatible */ + port->mapbase = mmres->start; + + if (IS_ENABLED(CONFIG_LANTIQ) && !IS_ENABLED(CONFIG_COMMON_CLK)) + ltq_port->freqclk = clk_get_fpi(); + else + ltq_port->freqclk = devm_clk_get(&pdev->dev, "freq"); + + + if (IS_ERR(ltq_port->freqclk)) { + pr_err("failed to get fpi clk\n"); + return -ENOENT; + } + + /* not all asc ports have clock gates, lets ignore the return code */ + if (IS_ENABLED(CONFIG_LANTIQ) && !IS_ENABLED(CONFIG_COMMON_CLK)) + ltq_port->clk = clk_get(&pdev->dev, NULL); + else + ltq_port->clk = devm_clk_get(&pdev->dev, "asc"); + + spin_lock_init(<q_port->lock); + lqasc_port[line] = ltq_port; + platform_set_drvdata(pdev, ltq_port); + + ret = uart_add_one_port(&lqasc_reg, port); + + return ret; +} + +static int lqasc_remove(struct platform_device *pdev) +{ + struct uart_port *port = platform_get_drvdata(pdev); + + return uart_remove_one_port(&lqasc_reg, port); +} + +static const struct ltq_soc_data soc_data_lantiq = { + .fetch_irq = fetch_irq_lantiq, + .request_irq = request_irq_lantiq, + .free_irq = free_irq_lantiq, +}; + +static const struct ltq_soc_data soc_data_intel = { + .fetch_irq = fetch_irq_intel, + .request_irq = request_irq_intel, + .free_irq = free_irq_intel, +}; + +static const struct of_device_id ltq_asc_match[] = { + { .compatible = "lantiq,asc", .data = &soc_data_lantiq }, + { .compatible = "intel,lgm-asc", .data = &soc_data_intel }, + {}, +}; +MODULE_DEVICE_TABLE(of, ltq_asc_match); + +static struct platform_driver lqasc_driver = { + .probe = lqasc_probe, + .remove = lqasc_remove, + .driver = { + .name = DRVNAME, + .of_match_table = ltq_asc_match, + }, +}; + +static int __init +init_lqasc(void) +{ + int ret; + + ret = uart_register_driver(&lqasc_reg); + if (ret != 0) + return ret; + + ret = platform_driver_register(&lqasc_driver); + if (ret != 0) + uart_unregister_driver(&lqasc_reg); + + return ret; +} + +static void __exit exit_lqasc(void) +{ + platform_driver_unregister(&lqasc_driver); + uart_unregister_driver(&lqasc_reg); +} + +module_init(init_lqasc); +module_exit(exit_lqasc); + +MODULE_DESCRIPTION("Serial driver for Lantiq & Intel gateway SoCs"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/lpc32xx_hs.c b/drivers/tty/serial/lpc32xx_hs.c new file mode 100644 index 000000000..a9802308f --- /dev/null +++ b/drivers/tty/serial/lpc32xx_hs.c @@ -0,0 +1,765 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * High Speed Serial Ports on NXP LPC32xx SoC + * + * Authors: Kevin Wells + * Roland Stigge + * + * Copyright (C) 2010 NXP Semiconductors + * Copyright (C) 2012 Roland Stigge + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * High Speed UART register offsets + */ +#define LPC32XX_HSUART_FIFO(x) ((x) + 0x00) +#define LPC32XX_HSUART_LEVEL(x) ((x) + 0x04) +#define LPC32XX_HSUART_IIR(x) ((x) + 0x08) +#define LPC32XX_HSUART_CTRL(x) ((x) + 0x0C) +#define LPC32XX_HSUART_RATE(x) ((x) + 0x10) + +#define LPC32XX_HSU_BREAK_DATA (1 << 10) +#define LPC32XX_HSU_ERROR_DATA (1 << 9) +#define LPC32XX_HSU_RX_EMPTY (1 << 8) + +#define LPC32XX_HSU_TX_LEV(n) (((n) >> 8) & 0xFF) +#define LPC32XX_HSU_RX_LEV(n) ((n) & 0xFF) + +#define LPC32XX_HSU_TX_INT_SET (1 << 6) +#define LPC32XX_HSU_RX_OE_INT (1 << 5) +#define LPC32XX_HSU_BRK_INT (1 << 4) +#define LPC32XX_HSU_FE_INT (1 << 3) +#define LPC32XX_HSU_RX_TIMEOUT_INT (1 << 2) +#define LPC32XX_HSU_RX_TRIG_INT (1 << 1) +#define LPC32XX_HSU_TX_INT (1 << 0) + +#define LPC32XX_HSU_HRTS_INV (1 << 21) +#define LPC32XX_HSU_HRTS_TRIG_8B (0x0 << 19) +#define LPC32XX_HSU_HRTS_TRIG_16B (0x1 << 19) +#define LPC32XX_HSU_HRTS_TRIG_32B (0x2 << 19) +#define LPC32XX_HSU_HRTS_TRIG_48B (0x3 << 19) +#define LPC32XX_HSU_HRTS_EN (1 << 18) +#define LPC32XX_HSU_TMO_DISABLED (0x0 << 16) +#define LPC32XX_HSU_TMO_INACT_4B (0x1 << 16) +#define LPC32XX_HSU_TMO_INACT_8B (0x2 << 16) +#define LPC32XX_HSU_TMO_INACT_16B (0x3 << 16) +#define LPC32XX_HSU_HCTS_INV (1 << 15) +#define LPC32XX_HSU_HCTS_EN (1 << 14) +#define LPC32XX_HSU_OFFSET(n) ((n) << 9) +#define LPC32XX_HSU_BREAK (1 << 8) +#define LPC32XX_HSU_ERR_INT_EN (1 << 7) +#define LPC32XX_HSU_RX_INT_EN (1 << 6) +#define LPC32XX_HSU_TX_INT_EN (1 << 5) +#define LPC32XX_HSU_RX_TL1B (0x0 << 2) +#define LPC32XX_HSU_RX_TL4B (0x1 << 2) +#define LPC32XX_HSU_RX_TL8B (0x2 << 2) +#define LPC32XX_HSU_RX_TL16B (0x3 << 2) +#define LPC32XX_HSU_RX_TL32B (0x4 << 2) +#define LPC32XX_HSU_RX_TL48B (0x5 << 2) +#define LPC32XX_HSU_TX_TLEMPTY (0x0 << 0) +#define LPC32XX_HSU_TX_TL0B (0x0 << 0) +#define LPC32XX_HSU_TX_TL4B (0x1 << 0) +#define LPC32XX_HSU_TX_TL8B (0x2 << 0) +#define LPC32XX_HSU_TX_TL16B (0x3 << 0) + +#define LPC32XX_MAIN_OSC_FREQ 13000000 + +#define MODNAME "lpc32xx_hsuart" + +struct lpc32xx_hsuart_port { + struct uart_port port; +}; + +#define FIFO_READ_LIMIT 128 +#define MAX_PORTS 3 +#define LPC32XX_TTY_NAME "ttyTX" +static struct lpc32xx_hsuart_port lpc32xx_hs_ports[MAX_PORTS]; + +#ifdef CONFIG_SERIAL_HS_LPC32XX_CONSOLE +static void wait_for_xmit_empty(struct uart_port *port) +{ + unsigned int timeout = 10000; + + do { + if (LPC32XX_HSU_TX_LEV(readl(LPC32XX_HSUART_LEVEL( + port->membase))) == 0) + break; + if (--timeout == 0) + break; + udelay(1); + } while (1); +} + +static void wait_for_xmit_ready(struct uart_port *port) +{ + unsigned int timeout = 10000; + + while (1) { + if (LPC32XX_HSU_TX_LEV(readl(LPC32XX_HSUART_LEVEL( + port->membase))) < 32) + break; + if (--timeout == 0) + break; + udelay(1); + } +} + +static void lpc32xx_hsuart_console_putchar(struct uart_port *port, int ch) +{ + wait_for_xmit_ready(port); + writel((u32)ch, LPC32XX_HSUART_FIFO(port->membase)); +} + +static void lpc32xx_hsuart_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct lpc32xx_hsuart_port *up = &lpc32xx_hs_ports[co->index]; + unsigned long flags; + int locked = 1; + + touch_nmi_watchdog(); + local_irq_save(flags); + if (up->port.sysrq) + locked = 0; + else if (oops_in_progress) + locked = spin_trylock(&up->port.lock); + else + spin_lock(&up->port.lock); + + uart_console_write(&up->port, s, count, lpc32xx_hsuart_console_putchar); + wait_for_xmit_empty(&up->port); + + if (locked) + spin_unlock(&up->port.lock); + local_irq_restore(flags); +} + +static int __init lpc32xx_hsuart_console_setup(struct console *co, + char *options) +{ + struct uart_port *port; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index >= MAX_PORTS) + co->index = 0; + + port = &lpc32xx_hs_ports[co->index].port; + if (!port->membase) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + lpc32xx_loopback_set(port->mapbase, 0); /* get out of loopback mode */ + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver lpc32xx_hsuart_reg; +static struct console lpc32xx_hsuart_console = { + .name = LPC32XX_TTY_NAME, + .write = lpc32xx_hsuart_console_write, + .device = uart_console_device, + .setup = lpc32xx_hsuart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &lpc32xx_hsuart_reg, +}; + +static int __init lpc32xx_hsuart_console_init(void) +{ + register_console(&lpc32xx_hsuart_console); + return 0; +} +console_initcall(lpc32xx_hsuart_console_init); + +#define LPC32XX_HSUART_CONSOLE (&lpc32xx_hsuart_console) +#else +#define LPC32XX_HSUART_CONSOLE NULL +#endif + +static struct uart_driver lpc32xx_hs_reg = { + .owner = THIS_MODULE, + .driver_name = MODNAME, + .dev_name = LPC32XX_TTY_NAME, + .nr = MAX_PORTS, + .cons = LPC32XX_HSUART_CONSOLE, +}; +static int uarts_registered; + +static unsigned int __serial_get_clock_div(unsigned long uartclk, + unsigned long rate) +{ + u32 div, goodrate, hsu_rate, l_hsu_rate, comprate; + u32 rate_diff; + + /* Find the closest divider to get the desired clock rate */ + div = uartclk / rate; + goodrate = hsu_rate = (div / 14) - 1; + if (hsu_rate != 0) + hsu_rate--; + + /* Tweak divider */ + l_hsu_rate = hsu_rate + 3; + rate_diff = 0xFFFFFFFF; + + while (hsu_rate < l_hsu_rate) { + comprate = uartclk / ((hsu_rate + 1) * 14); + if (abs(comprate - rate) < rate_diff) { + goodrate = hsu_rate; + rate_diff = abs(comprate - rate); + } + + hsu_rate++; + } + if (hsu_rate > 0xFF) + hsu_rate = 0xFF; + + return goodrate; +} + +static void __serial_uart_flush(struct uart_port *port) +{ + u32 tmp; + int cnt = 0; + + while ((readl(LPC32XX_HSUART_LEVEL(port->membase)) > 0) && + (cnt++ < FIFO_READ_LIMIT)) + tmp = readl(LPC32XX_HSUART_FIFO(port->membase)); +} + +static void __serial_lpc32xx_rx(struct uart_port *port) +{ + struct tty_port *tport = &port->state->port; + unsigned int tmp, flag; + + /* Read data from FIFO and push into terminal */ + tmp = readl(LPC32XX_HSUART_FIFO(port->membase)); + while (!(tmp & LPC32XX_HSU_RX_EMPTY)) { + flag = TTY_NORMAL; + port->icount.rx++; + + if (tmp & LPC32XX_HSU_ERROR_DATA) { + /* Framing error */ + writel(LPC32XX_HSU_FE_INT, + LPC32XX_HSUART_IIR(port->membase)); + port->icount.frame++; + flag = TTY_FRAME; + tty_insert_flip_char(tport, 0, TTY_FRAME); + } + + tty_insert_flip_char(tport, (tmp & 0xFF), flag); + + tmp = readl(LPC32XX_HSUART_FIFO(port->membase)); + } + + spin_unlock(&port->lock); + tty_flip_buffer_push(tport); + spin_lock(&port->lock); +} + +static void __serial_lpc32xx_tx(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + unsigned int tmp; + + if (port->x_char) { + writel((u32)port->x_char, LPC32XX_HSUART_FIFO(port->membase)); + port->icount.tx++; + port->x_char = 0; + return; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) + goto exit_tx; + + /* Transfer data */ + while (LPC32XX_HSU_TX_LEV(readl( + LPC32XX_HSUART_LEVEL(port->membase))) < 64) { + writel((u32) xmit->buf[xmit->tail], + LPC32XX_HSUART_FIFO(port->membase)); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + +exit_tx: + if (uart_circ_empty(xmit)) { + tmp = readl(LPC32XX_HSUART_CTRL(port->membase)); + tmp &= ~LPC32XX_HSU_TX_INT_EN; + writel(tmp, LPC32XX_HSUART_CTRL(port->membase)); + } +} + +static irqreturn_t serial_lpc32xx_interrupt(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + struct tty_port *tport = &port->state->port; + u32 status; + + spin_lock(&port->lock); + + /* Read UART status and clear latched interrupts */ + status = readl(LPC32XX_HSUART_IIR(port->membase)); + + if (status & LPC32XX_HSU_BRK_INT) { + /* Break received */ + writel(LPC32XX_HSU_BRK_INT, LPC32XX_HSUART_IIR(port->membase)); + port->icount.brk++; + uart_handle_break(port); + } + + /* Framing error */ + if (status & LPC32XX_HSU_FE_INT) + writel(LPC32XX_HSU_FE_INT, LPC32XX_HSUART_IIR(port->membase)); + + if (status & LPC32XX_HSU_RX_OE_INT) { + /* Receive FIFO overrun */ + writel(LPC32XX_HSU_RX_OE_INT, + LPC32XX_HSUART_IIR(port->membase)); + port->icount.overrun++; + tty_insert_flip_char(tport, 0, TTY_OVERRUN); + tty_flip_buffer_push(tport); + } + + /* Data received? */ + if (status & (LPC32XX_HSU_RX_TIMEOUT_INT | LPC32XX_HSU_RX_TRIG_INT)) + __serial_lpc32xx_rx(port); + + /* Transmit data request? */ + if ((status & LPC32XX_HSU_TX_INT) && (!uart_tx_stopped(port))) { + writel(LPC32XX_HSU_TX_INT, LPC32XX_HSUART_IIR(port->membase)); + __serial_lpc32xx_tx(port); + } + + spin_unlock(&port->lock); + + return IRQ_HANDLED; +} + +/* port->lock is not held. */ +static unsigned int serial_lpc32xx_tx_empty(struct uart_port *port) +{ + unsigned int ret = 0; + + if (LPC32XX_HSU_TX_LEV(readl(LPC32XX_HSUART_LEVEL(port->membase))) == 0) + ret = TIOCSER_TEMT; + + return ret; +} + +/* port->lock held by caller. */ +static void serial_lpc32xx_set_mctrl(struct uart_port *port, + unsigned int mctrl) +{ + /* No signals are supported on HS UARTs */ +} + +/* port->lock is held by caller and interrupts are disabled. */ +static unsigned int serial_lpc32xx_get_mctrl(struct uart_port *port) +{ + /* No signals are supported on HS UARTs */ + return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; +} + +/* port->lock held by caller. */ +static void serial_lpc32xx_stop_tx(struct uart_port *port) +{ + u32 tmp; + + tmp = readl(LPC32XX_HSUART_CTRL(port->membase)); + tmp &= ~LPC32XX_HSU_TX_INT_EN; + writel(tmp, LPC32XX_HSUART_CTRL(port->membase)); +} + +/* port->lock held by caller. */ +static void serial_lpc32xx_start_tx(struct uart_port *port) +{ + u32 tmp; + + __serial_lpc32xx_tx(port); + tmp = readl(LPC32XX_HSUART_CTRL(port->membase)); + tmp |= LPC32XX_HSU_TX_INT_EN; + writel(tmp, LPC32XX_HSUART_CTRL(port->membase)); +} + +/* port->lock held by caller. */ +static void serial_lpc32xx_stop_rx(struct uart_port *port) +{ + u32 tmp; + + tmp = readl(LPC32XX_HSUART_CTRL(port->membase)); + tmp &= ~(LPC32XX_HSU_RX_INT_EN | LPC32XX_HSU_ERR_INT_EN); + writel(tmp, LPC32XX_HSUART_CTRL(port->membase)); + + writel((LPC32XX_HSU_BRK_INT | LPC32XX_HSU_RX_OE_INT | + LPC32XX_HSU_FE_INT), LPC32XX_HSUART_IIR(port->membase)); +} + +/* port->lock is not held. */ +static void serial_lpc32xx_break_ctl(struct uart_port *port, + int break_state) +{ + unsigned long flags; + u32 tmp; + + spin_lock_irqsave(&port->lock, flags); + tmp = readl(LPC32XX_HSUART_CTRL(port->membase)); + if (break_state != 0) + tmp |= LPC32XX_HSU_BREAK; + else + tmp &= ~LPC32XX_HSU_BREAK; + writel(tmp, LPC32XX_HSUART_CTRL(port->membase)); + spin_unlock_irqrestore(&port->lock, flags); +} + +/* port->lock is not held. */ +static int serial_lpc32xx_startup(struct uart_port *port) +{ + int retval; + unsigned long flags; + u32 tmp; + + spin_lock_irqsave(&port->lock, flags); + + __serial_uart_flush(port); + + writel((LPC32XX_HSU_TX_INT | LPC32XX_HSU_FE_INT | + LPC32XX_HSU_BRK_INT | LPC32XX_HSU_RX_OE_INT), + LPC32XX_HSUART_IIR(port->membase)); + + writel(0xFF, LPC32XX_HSUART_RATE(port->membase)); + + /* + * Set receiver timeout, HSU offset of 20, no break, no interrupts, + * and default FIFO trigger levels + */ + tmp = LPC32XX_HSU_TX_TL8B | LPC32XX_HSU_RX_TL32B | + LPC32XX_HSU_OFFSET(20) | LPC32XX_HSU_TMO_INACT_4B; + writel(tmp, LPC32XX_HSUART_CTRL(port->membase)); + + lpc32xx_loopback_set(port->mapbase, 0); /* get out of loopback mode */ + + spin_unlock_irqrestore(&port->lock, flags); + + retval = request_irq(port->irq, serial_lpc32xx_interrupt, + 0, MODNAME, port); + if (!retval) + writel((tmp | LPC32XX_HSU_RX_INT_EN | LPC32XX_HSU_ERR_INT_EN), + LPC32XX_HSUART_CTRL(port->membase)); + + return retval; +} + +/* port->lock is not held. */ +static void serial_lpc32xx_shutdown(struct uart_port *port) +{ + u32 tmp; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + tmp = LPC32XX_HSU_TX_TL8B | LPC32XX_HSU_RX_TL32B | + LPC32XX_HSU_OFFSET(20) | LPC32XX_HSU_TMO_INACT_4B; + writel(tmp, LPC32XX_HSUART_CTRL(port->membase)); + + lpc32xx_loopback_set(port->mapbase, 1); /* go to loopback mode */ + + spin_unlock_irqrestore(&port->lock, flags); + + free_irq(port->irq, port); +} + +/* port->lock is not held. */ +static void serial_lpc32xx_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + unsigned long flags; + unsigned int baud, quot; + u32 tmp; + + /* Always 8-bit, no parity, 1 stop bit */ + termios->c_cflag &= ~(CSIZE | CSTOPB | PARENB | PARODD); + termios->c_cflag |= CS8; + + termios->c_cflag &= ~(HUPCL | CMSPAR | CLOCAL | CRTSCTS); + + baud = uart_get_baud_rate(port, termios, old, 0, + port->uartclk / 14); + + quot = __serial_get_clock_div(port->uartclk, baud); + + spin_lock_irqsave(&port->lock, flags); + + /* Ignore characters? */ + tmp = readl(LPC32XX_HSUART_CTRL(port->membase)); + if ((termios->c_cflag & CREAD) == 0) + tmp &= ~(LPC32XX_HSU_RX_INT_EN | LPC32XX_HSU_ERR_INT_EN); + else + tmp |= LPC32XX_HSU_RX_INT_EN | LPC32XX_HSU_ERR_INT_EN; + writel(tmp, LPC32XX_HSUART_CTRL(port->membase)); + + writel(quot, LPC32XX_HSUART_RATE(port->membase)); + + uart_update_timeout(port, termios->c_cflag, baud); + + spin_unlock_irqrestore(&port->lock, flags); + + /* Don't rewrite B0 */ + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, baud, baud); +} + +static const char *serial_lpc32xx_type(struct uart_port *port) +{ + return MODNAME; +} + +static void serial_lpc32xx_release_port(struct uart_port *port) +{ + if ((port->iotype == UPIO_MEM32) && (port->mapbase)) { + if (port->flags & UPF_IOREMAP) { + iounmap(port->membase); + port->membase = NULL; + } + + release_mem_region(port->mapbase, SZ_4K); + } +} + +static int serial_lpc32xx_request_port(struct uart_port *port) +{ + int ret = -ENODEV; + + if ((port->iotype == UPIO_MEM32) && (port->mapbase)) { + ret = 0; + + if (!request_mem_region(port->mapbase, SZ_4K, MODNAME)) + ret = -EBUSY; + else if (port->flags & UPF_IOREMAP) { + port->membase = ioremap(port->mapbase, SZ_4K); + if (!port->membase) { + release_mem_region(port->mapbase, SZ_4K); + ret = -ENOMEM; + } + } + } + + return ret; +} + +static void serial_lpc32xx_config_port(struct uart_port *port, int uflags) +{ + int ret; + + ret = serial_lpc32xx_request_port(port); + if (ret < 0) + return; + port->type = PORT_UART00; + port->fifosize = 64; + + __serial_uart_flush(port); + + writel((LPC32XX_HSU_TX_INT | LPC32XX_HSU_FE_INT | + LPC32XX_HSU_BRK_INT | LPC32XX_HSU_RX_OE_INT), + LPC32XX_HSUART_IIR(port->membase)); + + writel(0xFF, LPC32XX_HSUART_RATE(port->membase)); + + /* Set receiver timeout, HSU offset of 20, no break, no interrupts, + and default FIFO trigger levels */ + writel(LPC32XX_HSU_TX_TL8B | LPC32XX_HSU_RX_TL32B | + LPC32XX_HSU_OFFSET(20) | LPC32XX_HSU_TMO_INACT_4B, + LPC32XX_HSUART_CTRL(port->membase)); +} + +static int serial_lpc32xx_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + int ret = 0; + + if (ser->type != PORT_UART00) + ret = -EINVAL; + + return ret; +} + +static const struct uart_ops serial_lpc32xx_pops = { + .tx_empty = serial_lpc32xx_tx_empty, + .set_mctrl = serial_lpc32xx_set_mctrl, + .get_mctrl = serial_lpc32xx_get_mctrl, + .stop_tx = serial_lpc32xx_stop_tx, + .start_tx = serial_lpc32xx_start_tx, + .stop_rx = serial_lpc32xx_stop_rx, + .break_ctl = serial_lpc32xx_break_ctl, + .startup = serial_lpc32xx_startup, + .shutdown = serial_lpc32xx_shutdown, + .set_termios = serial_lpc32xx_set_termios, + .type = serial_lpc32xx_type, + .release_port = serial_lpc32xx_release_port, + .request_port = serial_lpc32xx_request_port, + .config_port = serial_lpc32xx_config_port, + .verify_port = serial_lpc32xx_verify_port, +}; + +/* + * Register a set of serial devices attached to a platform device + */ +static int serial_hs_lpc32xx_probe(struct platform_device *pdev) +{ + struct lpc32xx_hsuart_port *p = &lpc32xx_hs_ports[uarts_registered]; + int ret = 0; + struct resource *res; + + if (uarts_registered >= MAX_PORTS) { + dev_err(&pdev->dev, + "Error: Number of possible ports exceeded (%d)!\n", + uarts_registered + 1); + return -ENXIO; + } + + memset(p, 0, sizeof(*p)); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, + "Error getting mem resource for HS UART port %d\n", + uarts_registered); + return -ENXIO; + } + p->port.mapbase = res->start; + p->port.membase = NULL; + + ret = platform_get_irq(pdev, 0); + if (ret < 0) + return ret; + p->port.irq = ret; + + p->port.iotype = UPIO_MEM32; + p->port.uartclk = LPC32XX_MAIN_OSC_FREQ; + p->port.regshift = 2; + p->port.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_PORT | UPF_IOREMAP; + p->port.dev = &pdev->dev; + p->port.ops = &serial_lpc32xx_pops; + p->port.line = uarts_registered++; + spin_lock_init(&p->port.lock); + + /* send port to loopback mode by default */ + lpc32xx_loopback_set(p->port.mapbase, 1); + + ret = uart_add_one_port(&lpc32xx_hs_reg, &p->port); + + platform_set_drvdata(pdev, p); + + return ret; +} + +/* + * Remove serial ports registered against a platform device. + */ +static int serial_hs_lpc32xx_remove(struct platform_device *pdev) +{ + struct lpc32xx_hsuart_port *p = platform_get_drvdata(pdev); + + uart_remove_one_port(&lpc32xx_hs_reg, &p->port); + + return 0; +} + + +#ifdef CONFIG_PM +static int serial_hs_lpc32xx_suspend(struct platform_device *pdev, + pm_message_t state) +{ + struct lpc32xx_hsuart_port *p = platform_get_drvdata(pdev); + + uart_suspend_port(&lpc32xx_hs_reg, &p->port); + + return 0; +} + +static int serial_hs_lpc32xx_resume(struct platform_device *pdev) +{ + struct lpc32xx_hsuart_port *p = platform_get_drvdata(pdev); + + uart_resume_port(&lpc32xx_hs_reg, &p->port); + + return 0; +} +#else +#define serial_hs_lpc32xx_suspend NULL +#define serial_hs_lpc32xx_resume NULL +#endif + +static const struct of_device_id serial_hs_lpc32xx_dt_ids[] = { + { .compatible = "nxp,lpc3220-hsuart" }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, serial_hs_lpc32xx_dt_ids); + +static struct platform_driver serial_hs_lpc32xx_driver = { + .probe = serial_hs_lpc32xx_probe, + .remove = serial_hs_lpc32xx_remove, + .suspend = serial_hs_lpc32xx_suspend, + .resume = serial_hs_lpc32xx_resume, + .driver = { + .name = MODNAME, + .of_match_table = serial_hs_lpc32xx_dt_ids, + }, +}; + +static int __init lpc32xx_hsuart_init(void) +{ + int ret; + + ret = uart_register_driver(&lpc32xx_hs_reg); + if (ret) + return ret; + + ret = platform_driver_register(&serial_hs_lpc32xx_driver); + if (ret) + uart_unregister_driver(&lpc32xx_hs_reg); + + return ret; +} + +static void __exit lpc32xx_hsuart_exit(void) +{ + platform_driver_unregister(&serial_hs_lpc32xx_driver); + uart_unregister_driver(&lpc32xx_hs_reg); +} + +module_init(lpc32xx_hsuart_init); +module_exit(lpc32xx_hsuart_exit); + +MODULE_AUTHOR("Kevin Wells "); +MODULE_AUTHOR("Roland Stigge "); +MODULE_DESCRIPTION("NXP LPC32XX High Speed UART driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c new file mode 100644 index 000000000..371569a0f --- /dev/null +++ b/drivers/tty/serial/max3100.c @@ -0,0 +1,909 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * + * Copyright (C) 2008 Christian Pellegrin + * + * Notes: the MAX3100 doesn't provide an interrupt on CTS so we have + * to use polling for flow control. TX empty IRQ is unusable, since + * writing conf clears FIFO buffer and we cannot have this interrupt + * always asking us for attention. + * + * Example platform data: + + static struct plat_max3100 max3100_plat_data = { + .loopback = 0, + .crystal = 0, + .poll_time = 100, + }; + + static struct spi_board_info spi_board_info[] = { + { + .modalias = "max3100", + .platform_data = &max3100_plat_data, + .irq = IRQ_EINT12, + .max_speed_hz = 5*1000*1000, + .chip_select = 0, + }, + }; + + * The initial minor number is 209 in the low-density serial port: + * mknod /dev/ttyMAX0 c 204 209 + */ + +#define MAX3100_MAJOR 204 +#define MAX3100_MINOR 209 +/* 4 MAX3100s should be enough for everyone */ +#define MAX_MAX3100 4 + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define MAX3100_C (1<<14) +#define MAX3100_D (0<<14) +#define MAX3100_W (1<<15) +#define MAX3100_RX (0<<15) + +#define MAX3100_WC (MAX3100_W | MAX3100_C) +#define MAX3100_RC (MAX3100_RX | MAX3100_C) +#define MAX3100_WD (MAX3100_W | MAX3100_D) +#define MAX3100_RD (MAX3100_RX | MAX3100_D) +#define MAX3100_CMD (3 << 14) + +#define MAX3100_T (1<<14) +#define MAX3100_R (1<<15) + +#define MAX3100_FEN (1<<13) +#define MAX3100_SHDN (1<<12) +#define MAX3100_TM (1<<11) +#define MAX3100_RM (1<<10) +#define MAX3100_PM (1<<9) +#define MAX3100_RAM (1<<8) +#define MAX3100_IR (1<<7) +#define MAX3100_ST (1<<6) +#define MAX3100_PE (1<<5) +#define MAX3100_L (1<<4) +#define MAX3100_BAUD (0xf) + +#define MAX3100_TE (1<<10) +#define MAX3100_RAFE (1<<10) +#define MAX3100_RTS (1<<9) +#define MAX3100_CTS (1<<9) +#define MAX3100_PT (1<<8) +#define MAX3100_DATA (0xff) + +#define MAX3100_RT (MAX3100_R | MAX3100_T) +#define MAX3100_RTC (MAX3100_RT | MAX3100_CTS | MAX3100_RAFE) + +/* the following simulate a status reg for ignore_status_mask */ +#define MAX3100_STATUS_PE 1 +#define MAX3100_STATUS_FE 2 +#define MAX3100_STATUS_OE 4 + +struct max3100_port { + struct uart_port port; + struct spi_device *spi; + + int cts; /* last CTS received for flow ctrl */ + int tx_empty; /* last TX empty bit */ + + spinlock_t conf_lock; /* shared data */ + int conf_commit; /* need to make changes */ + int conf; /* configuration for the MAX31000 + * (bits 0-7, bits 8-11 are irqs) */ + int rts_commit; /* need to change rts */ + int rts; /* rts status */ + int baud; /* current baud rate */ + + int parity; /* keeps track if we should send parity */ +#define MAX3100_PARITY_ON 1 +#define MAX3100_PARITY_ODD 2 +#define MAX3100_7BIT 4 + int rx_enabled; /* if we should rx chars */ + + int irq; /* irq assigned to the max3100 */ + + int minor; /* minor number */ + int crystal; /* 1 if 3.6864Mhz crystal 0 for 1.8432 */ + int loopback; /* 1 if we are in loopback mode */ + + /* for handling irqs: need workqueue since we do spi_sync */ + struct workqueue_struct *workqueue; + struct work_struct work; + /* set to 1 to make the workhandler exit as soon as possible */ + int force_end_work; + /* need to know we are suspending to avoid deadlock on workqueue */ + int suspending; + + /* hook for suspending MAX3100 via dedicated pin */ + void (*max3100_hw_suspend) (int suspend); + + /* poll time (in ms) for ctrl lines */ + int poll_time; + /* and its timer */ + struct timer_list timer; +}; + +static struct max3100_port *max3100s[MAX_MAX3100]; /* the chips */ +static DEFINE_MUTEX(max3100s_lock); /* race on probe */ + +static int max3100_do_parity(struct max3100_port *s, u16 c) +{ + int parity; + + if (s->parity & MAX3100_PARITY_ODD) + parity = 1; + else + parity = 0; + + if (s->parity & MAX3100_7BIT) + c &= 0x7f; + else + c &= 0xff; + + parity = parity ^ (hweight8(c) & 1); + return parity; +} + +static int max3100_check_parity(struct max3100_port *s, u16 c) +{ + return max3100_do_parity(s, c) == ((c >> 8) & 1); +} + +static void max3100_calc_parity(struct max3100_port *s, u16 *c) +{ + if (s->parity & MAX3100_7BIT) + *c &= 0x7f; + else + *c &= 0xff; + + if (s->parity & MAX3100_PARITY_ON) + *c |= max3100_do_parity(s, *c) << 8; +} + +static void max3100_work(struct work_struct *w); + +static void max3100_dowork(struct max3100_port *s) +{ + if (!s->force_end_work && !freezing(current) && !s->suspending) + queue_work(s->workqueue, &s->work); +} + +static void max3100_timeout(struct timer_list *t) +{ + struct max3100_port *s = from_timer(s, t, timer); + + if (s->port.state) { + max3100_dowork(s); + mod_timer(&s->timer, jiffies + s->poll_time); + } +} + +static int max3100_sr(struct max3100_port *s, u16 tx, u16 *rx) +{ + struct spi_message message; + u16 etx, erx; + int status; + struct spi_transfer tran = { + .tx_buf = &etx, + .rx_buf = &erx, + .len = 2, + }; + + etx = cpu_to_be16(tx); + spi_message_init(&message); + spi_message_add_tail(&tran, &message); + status = spi_sync(s->spi, &message); + if (status) { + dev_warn(&s->spi->dev, "error while calling spi_sync\n"); + return -EIO; + } + *rx = be16_to_cpu(erx); + s->tx_empty = (*rx & MAX3100_T) > 0; + dev_dbg(&s->spi->dev, "%04x - %04x\n", tx, *rx); + return 0; +} + +static int max3100_handlerx(struct max3100_port *s, u16 rx) +{ + unsigned int ch, flg, status = 0; + int ret = 0, cts; + + if (rx & MAX3100_R && s->rx_enabled) { + dev_dbg(&s->spi->dev, "%s\n", __func__); + ch = rx & (s->parity & MAX3100_7BIT ? 0x7f : 0xff); + if (rx & MAX3100_RAFE) { + s->port.icount.frame++; + flg = TTY_FRAME; + status |= MAX3100_STATUS_FE; + } else { + if (s->parity & MAX3100_PARITY_ON) { + if (max3100_check_parity(s, rx)) { + s->port.icount.rx++; + flg = TTY_NORMAL; + } else { + s->port.icount.parity++; + flg = TTY_PARITY; + status |= MAX3100_STATUS_PE; + } + } else { + s->port.icount.rx++; + flg = TTY_NORMAL; + } + } + uart_insert_char(&s->port, status, MAX3100_STATUS_OE, ch, flg); + ret = 1; + } + + cts = (rx & MAX3100_CTS) > 0; + if (s->cts != cts) { + s->cts = cts; + uart_handle_cts_change(&s->port, cts ? TIOCM_CTS : 0); + } + + return ret; +} + +static void max3100_work(struct work_struct *w) +{ + struct max3100_port *s = container_of(w, struct max3100_port, work); + int rxchars; + u16 tx, rx; + int conf, cconf, crts; + struct circ_buf *xmit = &s->port.state->xmit; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + rxchars = 0; + do { + spin_lock(&s->conf_lock); + conf = s->conf; + cconf = s->conf_commit; + s->conf_commit = 0; + crts = s->rts_commit; + s->rts_commit = 0; + spin_unlock(&s->conf_lock); + if (cconf) + max3100_sr(s, MAX3100_WC | conf, &rx); + if (crts) { + max3100_sr(s, MAX3100_WD | MAX3100_TE | + (s->rts ? MAX3100_RTS : 0), &rx); + rxchars += max3100_handlerx(s, rx); + } + + max3100_sr(s, MAX3100_RD, &rx); + rxchars += max3100_handlerx(s, rx); + + if (rx & MAX3100_T) { + tx = 0xffff; + if (s->port.x_char) { + tx = s->port.x_char; + s->port.icount.tx++; + s->port.x_char = 0; + } else if (!uart_circ_empty(xmit) && + !uart_tx_stopped(&s->port)) { + tx = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & + (UART_XMIT_SIZE - 1); + s->port.icount.tx++; + } + if (tx != 0xffff) { + max3100_calc_parity(s, &tx); + tx |= MAX3100_WD | (s->rts ? MAX3100_RTS : 0); + max3100_sr(s, tx, &rx); + rxchars += max3100_handlerx(s, rx); + } + } + + if (rxchars > 16) { + tty_flip_buffer_push(&s->port.state->port); + rxchars = 0; + } + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&s->port); + + } while (!s->force_end_work && + !freezing(current) && + ((rx & MAX3100_R) || + (!uart_circ_empty(xmit) && + !uart_tx_stopped(&s->port)))); + + if (rxchars > 0) + tty_flip_buffer_push(&s->port.state->port); +} + +static irqreturn_t max3100_irq(int irqno, void *dev_id) +{ + struct max3100_port *s = dev_id; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + max3100_dowork(s); + return IRQ_HANDLED; +} + +static void max3100_enable_ms(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + if (s->poll_time > 0) + mod_timer(&s->timer, jiffies); + dev_dbg(&s->spi->dev, "%s\n", __func__); +} + +static void max3100_start_tx(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + max3100_dowork(s); +} + +static void max3100_stop_rx(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + s->rx_enabled = 0; + spin_lock(&s->conf_lock); + s->conf &= ~MAX3100_RM; + s->conf_commit = 1; + spin_unlock(&s->conf_lock); + max3100_dowork(s); +} + +static unsigned int max3100_tx_empty(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + /* may not be truly up-to-date */ + max3100_dowork(s); + return s->tx_empty; +} + +static unsigned int max3100_get_mctrl(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + /* may not be truly up-to-date */ + max3100_dowork(s); + /* always assert DCD and DSR since these lines are not wired */ + return (s->cts ? TIOCM_CTS : 0) | TIOCM_DSR | TIOCM_CAR; +} + +static void max3100_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + int rts; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + rts = (mctrl & TIOCM_RTS) > 0; + + spin_lock(&s->conf_lock); + if (s->rts != rts) { + s->rts = rts; + s->rts_commit = 1; + max3100_dowork(s); + } + spin_unlock(&s->conf_lock); +} + +static void +max3100_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + int baud = 0; + unsigned cflag; + u32 param_new, param_mask, parity = 0; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + cflag = termios->c_cflag; + param_mask = 0; + + baud = tty_termios_baud_rate(termios); + param_new = s->conf & MAX3100_BAUD; + switch (baud) { + case 300: + if (s->crystal) + baud = s->baud; + else + param_new = 15; + break; + case 600: + param_new = 14 + s->crystal; + break; + case 1200: + param_new = 13 + s->crystal; + break; + case 2400: + param_new = 12 + s->crystal; + break; + case 4800: + param_new = 11 + s->crystal; + break; + case 9600: + param_new = 10 + s->crystal; + break; + case 19200: + param_new = 9 + s->crystal; + break; + case 38400: + param_new = 8 + s->crystal; + break; + case 57600: + param_new = 1 + s->crystal; + break; + case 115200: + param_new = 0 + s->crystal; + break; + case 230400: + if (s->crystal) + param_new = 0; + else + baud = s->baud; + break; + default: + baud = s->baud; + } + tty_termios_encode_baud_rate(termios, baud, baud); + s->baud = baud; + param_mask |= MAX3100_BAUD; + + if ((cflag & CSIZE) == CS8) { + param_new &= ~MAX3100_L; + parity &= ~MAX3100_7BIT; + } else { + param_new |= MAX3100_L; + parity |= MAX3100_7BIT; + cflag = (cflag & ~CSIZE) | CS7; + } + param_mask |= MAX3100_L; + + if (cflag & CSTOPB) + param_new |= MAX3100_ST; + else + param_new &= ~MAX3100_ST; + param_mask |= MAX3100_ST; + + if (cflag & PARENB) { + param_new |= MAX3100_PE; + parity |= MAX3100_PARITY_ON; + } else { + param_new &= ~MAX3100_PE; + parity &= ~MAX3100_PARITY_ON; + } + param_mask |= MAX3100_PE; + + if (cflag & PARODD) + parity |= MAX3100_PARITY_ODD; + else + parity &= ~MAX3100_PARITY_ODD; + + /* mask termios capabilities we don't support */ + cflag &= ~CMSPAR; + termios->c_cflag = cflag; + + s->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + s->port.ignore_status_mask |= + MAX3100_STATUS_PE | MAX3100_STATUS_FE | + MAX3100_STATUS_OE; + + /* we are sending char from a workqueue so enable */ + s->port.state->port.low_latency = 1; + + if (s->poll_time > 0) + del_timer_sync(&s->timer); + + uart_update_timeout(port, termios->c_cflag, baud); + + spin_lock(&s->conf_lock); + s->conf = (s->conf & ~param_mask) | (param_new & param_mask); + s->conf_commit = 1; + s->parity = parity; + spin_unlock(&s->conf_lock); + max3100_dowork(s); + + if (UART_ENABLE_MS(&s->port, termios->c_cflag)) + max3100_enable_ms(&s->port); +} + +static void max3100_shutdown(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + if (s->suspending) + return; + + s->force_end_work = 1; + + if (s->poll_time > 0) + del_timer_sync(&s->timer); + + if (s->workqueue) { + flush_workqueue(s->workqueue); + destroy_workqueue(s->workqueue); + s->workqueue = NULL; + } + if (s->irq) + free_irq(s->irq, s); + + /* set shutdown mode to save power */ + if (s->max3100_hw_suspend) + s->max3100_hw_suspend(1); + else { + u16 tx, rx; + + tx = MAX3100_WC | MAX3100_SHDN; + max3100_sr(s, tx, &rx); + } +} + +static int max3100_startup(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + char b[12]; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + s->conf = MAX3100_RM; + s->baud = s->crystal ? 230400 : 115200; + s->rx_enabled = 1; + + if (s->suspending) + return 0; + + s->force_end_work = 0; + s->parity = 0; + s->rts = 0; + + sprintf(b, "max3100-%d", s->minor); + s->workqueue = create_freezable_workqueue(b); + if (!s->workqueue) { + dev_warn(&s->spi->dev, "cannot create workqueue\n"); + return -EBUSY; + } + INIT_WORK(&s->work, max3100_work); + + if (request_irq(s->irq, max3100_irq, + IRQF_TRIGGER_FALLING, "max3100", s) < 0) { + dev_warn(&s->spi->dev, "cannot allocate irq %d\n", s->irq); + s->irq = 0; + destroy_workqueue(s->workqueue); + s->workqueue = NULL; + return -EBUSY; + } + + if (s->loopback) { + u16 tx, rx; + tx = 0x4001; + max3100_sr(s, tx, &rx); + } + + if (s->max3100_hw_suspend) + s->max3100_hw_suspend(0); + s->conf_commit = 1; + max3100_dowork(s); + /* wait for clock to settle */ + msleep(50); + + max3100_enable_ms(&s->port); + + return 0; +} + +static const char *max3100_type(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + return s->port.type == PORT_MAX3100 ? "MAX3100" : NULL; +} + +static void max3100_release_port(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); +} + +static void max3100_config_port(struct uart_port *port, int flags) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + if (flags & UART_CONFIG_TYPE) + s->port.type = PORT_MAX3100; +} + +static int max3100_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + int ret = -EINVAL; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + if (ser->type == PORT_UNKNOWN || ser->type == PORT_MAX3100) + ret = 0; + return ret; +} + +static void max3100_stop_tx(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); +} + +static int max3100_request_port(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + return 0; +} + +static void max3100_break_ctl(struct uart_port *port, int break_state) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); +} + +static const struct uart_ops max3100_ops = { + .tx_empty = max3100_tx_empty, + .set_mctrl = max3100_set_mctrl, + .get_mctrl = max3100_get_mctrl, + .stop_tx = max3100_stop_tx, + .start_tx = max3100_start_tx, + .stop_rx = max3100_stop_rx, + .enable_ms = max3100_enable_ms, + .break_ctl = max3100_break_ctl, + .startup = max3100_startup, + .shutdown = max3100_shutdown, + .set_termios = max3100_set_termios, + .type = max3100_type, + .release_port = max3100_release_port, + .request_port = max3100_request_port, + .config_port = max3100_config_port, + .verify_port = max3100_verify_port, +}; + +static struct uart_driver max3100_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "ttyMAX", + .dev_name = "ttyMAX", + .major = MAX3100_MAJOR, + .minor = MAX3100_MINOR, + .nr = MAX_MAX3100, +}; +static int uart_driver_registered; + +static int max3100_probe(struct spi_device *spi) +{ + int i, retval; + struct plat_max3100 *pdata; + u16 tx, rx; + + mutex_lock(&max3100s_lock); + + if (!uart_driver_registered) { + uart_driver_registered = 1; + retval = uart_register_driver(&max3100_uart_driver); + if (retval) { + printk(KERN_ERR "Couldn't register max3100 uart driver\n"); + mutex_unlock(&max3100s_lock); + return retval; + } + } + + for (i = 0; i < MAX_MAX3100; i++) + if (!max3100s[i]) + break; + if (i == MAX_MAX3100) { + dev_warn(&spi->dev, "too many MAX3100 chips\n"); + mutex_unlock(&max3100s_lock); + return -ENOMEM; + } + + max3100s[i] = kzalloc(sizeof(struct max3100_port), GFP_KERNEL); + if (!max3100s[i]) { + dev_warn(&spi->dev, + "kmalloc for max3100 structure %d failed!\n", i); + mutex_unlock(&max3100s_lock); + return -ENOMEM; + } + max3100s[i]->spi = spi; + max3100s[i]->irq = spi->irq; + spin_lock_init(&max3100s[i]->conf_lock); + spi_set_drvdata(spi, max3100s[i]); + pdata = dev_get_platdata(&spi->dev); + max3100s[i]->crystal = pdata->crystal; + max3100s[i]->loopback = pdata->loopback; + max3100s[i]->poll_time = msecs_to_jiffies(pdata->poll_time); + if (pdata->poll_time > 0 && max3100s[i]->poll_time == 0) + max3100s[i]->poll_time = 1; + max3100s[i]->max3100_hw_suspend = pdata->max3100_hw_suspend; + max3100s[i]->minor = i; + timer_setup(&max3100s[i]->timer, max3100_timeout, 0); + + dev_dbg(&spi->dev, "%s: adding port %d\n", __func__, i); + max3100s[i]->port.irq = max3100s[i]->irq; + max3100s[i]->port.uartclk = max3100s[i]->crystal ? 3686400 : 1843200; + max3100s[i]->port.fifosize = 16; + max3100s[i]->port.ops = &max3100_ops; + max3100s[i]->port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF; + max3100s[i]->port.line = i; + max3100s[i]->port.type = PORT_MAX3100; + max3100s[i]->port.dev = &spi->dev; + retval = uart_add_one_port(&max3100_uart_driver, &max3100s[i]->port); + if (retval < 0) + dev_warn(&spi->dev, + "uart_add_one_port failed for line %d with error %d\n", + i, retval); + + /* set shutdown mode to save power. Will be woken-up on open */ + if (max3100s[i]->max3100_hw_suspend) + max3100s[i]->max3100_hw_suspend(1); + else { + tx = MAX3100_WC | MAX3100_SHDN; + max3100_sr(max3100s[i], tx, &rx); + } + mutex_unlock(&max3100s_lock); + return 0; +} + +static int max3100_remove(struct spi_device *spi) +{ + struct max3100_port *s = spi_get_drvdata(spi); + int i; + + mutex_lock(&max3100s_lock); + + /* find out the index for the chip we are removing */ + for (i = 0; i < MAX_MAX3100; i++) + if (max3100s[i] == s) { + dev_dbg(&spi->dev, "%s: removing port %d\n", __func__, i); + uart_remove_one_port(&max3100_uart_driver, &max3100s[i]->port); + kfree(max3100s[i]); + max3100s[i] = NULL; + break; + } + + WARN_ON(i == MAX_MAX3100); + + /* check if this is the last chip we have */ + for (i = 0; i < MAX_MAX3100; i++) + if (max3100s[i]) { + mutex_unlock(&max3100s_lock); + return 0; + } + pr_debug("removing max3100 driver\n"); + uart_unregister_driver(&max3100_uart_driver); + + mutex_unlock(&max3100s_lock); + return 0; +} + +#ifdef CONFIG_PM_SLEEP + +static int max3100_suspend(struct device *dev) +{ + struct max3100_port *s = dev_get_drvdata(dev); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + disable_irq(s->irq); + + s->suspending = 1; + uart_suspend_port(&max3100_uart_driver, &s->port); + + if (s->max3100_hw_suspend) + s->max3100_hw_suspend(1); + else { + /* no HW suspend, so do SW one */ + u16 tx, rx; + + tx = MAX3100_WC | MAX3100_SHDN; + max3100_sr(s, tx, &rx); + } + return 0; +} + +static int max3100_resume(struct device *dev) +{ + struct max3100_port *s = dev_get_drvdata(dev); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + if (s->max3100_hw_suspend) + s->max3100_hw_suspend(0); + uart_resume_port(&max3100_uart_driver, &s->port); + s->suspending = 0; + + enable_irq(s->irq); + + s->conf_commit = 1; + if (s->workqueue) + max3100_dowork(s); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(max3100_pm_ops, max3100_suspend, max3100_resume); +#define MAX3100_PM_OPS (&max3100_pm_ops) + +#else +#define MAX3100_PM_OPS NULL +#endif + +static struct spi_driver max3100_driver = { + .driver = { + .name = "max3100", + .pm = MAX3100_PM_OPS, + }, + .probe = max3100_probe, + .remove = max3100_remove, +}; + +module_spi_driver(max3100_driver); + +MODULE_DESCRIPTION("MAX3100 driver"); +MODULE_AUTHOR("Christian Pellegrin "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("spi:max3100"); diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c new file mode 100644 index 000000000..5bf8dd619 --- /dev/null +++ b/drivers/tty/serial/max310x.c @@ -0,0 +1,1551 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Maxim (Dallas) MAX3107/8/9, MAX14830 serial driver + * + * Copyright (C) 2012-2016 Alexander Shiyan + * + * Based on max3100.c, by Christian Pellegrin + * Based on max3110.c, by Feng Tang + * Based on max3107.c, by Aavamobile + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MAX310X_NAME "max310x" +#define MAX310X_MAJOR 204 +#define MAX310X_MINOR 209 +#define MAX310X_UART_NRMAX 16 + +/* MAX310X register definitions */ +#define MAX310X_RHR_REG (0x00) /* RX FIFO */ +#define MAX310X_THR_REG (0x00) /* TX FIFO */ +#define MAX310X_IRQEN_REG (0x01) /* IRQ enable */ +#define MAX310X_IRQSTS_REG (0x02) /* IRQ status */ +#define MAX310X_LSR_IRQEN_REG (0x03) /* LSR IRQ enable */ +#define MAX310X_LSR_IRQSTS_REG (0x04) /* LSR IRQ status */ +#define MAX310X_REG_05 (0x05) +#define MAX310X_SPCHR_IRQEN_REG MAX310X_REG_05 /* Special char IRQ en */ +#define MAX310X_SPCHR_IRQSTS_REG (0x06) /* Special char IRQ status */ +#define MAX310X_STS_IRQEN_REG (0x07) /* Status IRQ enable */ +#define MAX310X_STS_IRQSTS_REG (0x08) /* Status IRQ status */ +#define MAX310X_MODE1_REG (0x09) /* MODE1 */ +#define MAX310X_MODE2_REG (0x0a) /* MODE2 */ +#define MAX310X_LCR_REG (0x0b) /* LCR */ +#define MAX310X_RXTO_REG (0x0c) /* RX timeout */ +#define MAX310X_HDPIXDELAY_REG (0x0d) /* Auto transceiver delays */ +#define MAX310X_IRDA_REG (0x0e) /* IRDA settings */ +#define MAX310X_FLOWLVL_REG (0x0f) /* Flow control levels */ +#define MAX310X_FIFOTRIGLVL_REG (0x10) /* FIFO IRQ trigger levels */ +#define MAX310X_TXFIFOLVL_REG (0x11) /* TX FIFO level */ +#define MAX310X_RXFIFOLVL_REG (0x12) /* RX FIFO level */ +#define MAX310X_FLOWCTRL_REG (0x13) /* Flow control */ +#define MAX310X_XON1_REG (0x14) /* XON1 character */ +#define MAX310X_XON2_REG (0x15) /* XON2 character */ +#define MAX310X_XOFF1_REG (0x16) /* XOFF1 character */ +#define MAX310X_XOFF2_REG (0x17) /* XOFF2 character */ +#define MAX310X_GPIOCFG_REG (0x18) /* GPIO config */ +#define MAX310X_GPIODATA_REG (0x19) /* GPIO data */ +#define MAX310X_PLLCFG_REG (0x1a) /* PLL config */ +#define MAX310X_BRGCFG_REG (0x1b) /* Baud rate generator conf */ +#define MAX310X_BRGDIVLSB_REG (0x1c) /* Baud rate divisor LSB */ +#define MAX310X_BRGDIVMSB_REG (0x1d) /* Baud rate divisor MSB */ +#define MAX310X_CLKSRC_REG (0x1e) /* Clock source */ +#define MAX310X_REG_1F (0x1f) + +#define MAX310X_REVID_REG MAX310X_REG_1F /* Revision ID */ + +#define MAX310X_GLOBALIRQ_REG MAX310X_REG_1F /* Global IRQ (RO) */ +#define MAX310X_GLOBALCMD_REG MAX310X_REG_1F /* Global Command (WO) */ + +/* Extended registers */ +#define MAX310X_REVID_EXTREG MAX310X_REG_05 /* Revision ID */ + +/* IRQ register bits */ +#define MAX310X_IRQ_LSR_BIT (1 << 0) /* LSR interrupt */ +#define MAX310X_IRQ_SPCHR_BIT (1 << 1) /* Special char interrupt */ +#define MAX310X_IRQ_STS_BIT (1 << 2) /* Status interrupt */ +#define MAX310X_IRQ_RXFIFO_BIT (1 << 3) /* RX FIFO interrupt */ +#define MAX310X_IRQ_TXFIFO_BIT (1 << 4) /* TX FIFO interrupt */ +#define MAX310X_IRQ_TXEMPTY_BIT (1 << 5) /* TX FIFO empty interrupt */ +#define MAX310X_IRQ_RXEMPTY_BIT (1 << 6) /* RX FIFO empty interrupt */ +#define MAX310X_IRQ_CTS_BIT (1 << 7) /* CTS interrupt */ + +/* LSR register bits */ +#define MAX310X_LSR_RXTO_BIT (1 << 0) /* RX timeout */ +#define MAX310X_LSR_RXOVR_BIT (1 << 1) /* RX overrun */ +#define MAX310X_LSR_RXPAR_BIT (1 << 2) /* RX parity error */ +#define MAX310X_LSR_FRERR_BIT (1 << 3) /* Frame error */ +#define MAX310X_LSR_RXBRK_BIT (1 << 4) /* RX break */ +#define MAX310X_LSR_RXNOISE_BIT (1 << 5) /* RX noise */ +#define MAX310X_LSR_CTS_BIT (1 << 7) /* CTS pin state */ + +/* Special character register bits */ +#define MAX310X_SPCHR_XON1_BIT (1 << 0) /* XON1 character */ +#define MAX310X_SPCHR_XON2_BIT (1 << 1) /* XON2 character */ +#define MAX310X_SPCHR_XOFF1_BIT (1 << 2) /* XOFF1 character */ +#define MAX310X_SPCHR_XOFF2_BIT (1 << 3) /* XOFF2 character */ +#define MAX310X_SPCHR_BREAK_BIT (1 << 4) /* RX break */ +#define MAX310X_SPCHR_MULTIDROP_BIT (1 << 5) /* 9-bit multidrop addr char */ + +/* Status register bits */ +#define MAX310X_STS_GPIO0_BIT (1 << 0) /* GPIO 0 interrupt */ +#define MAX310X_STS_GPIO1_BIT (1 << 1) /* GPIO 1 interrupt */ +#define MAX310X_STS_GPIO2_BIT (1 << 2) /* GPIO 2 interrupt */ +#define MAX310X_STS_GPIO3_BIT (1 << 3) /* GPIO 3 interrupt */ +#define MAX310X_STS_CLKREADY_BIT (1 << 5) /* Clock ready */ +#define MAX310X_STS_SLEEP_BIT (1 << 6) /* Sleep interrupt */ + +/* MODE1 register bits */ +#define MAX310X_MODE1_RXDIS_BIT (1 << 0) /* RX disable */ +#define MAX310X_MODE1_TXDIS_BIT (1 << 1) /* TX disable */ +#define MAX310X_MODE1_TXHIZ_BIT (1 << 2) /* TX pin three-state */ +#define MAX310X_MODE1_RTSHIZ_BIT (1 << 3) /* RTS pin three-state */ +#define MAX310X_MODE1_TRNSCVCTRL_BIT (1 << 4) /* Transceiver ctrl enable */ +#define MAX310X_MODE1_FORCESLEEP_BIT (1 << 5) /* Force sleep mode */ +#define MAX310X_MODE1_AUTOSLEEP_BIT (1 << 6) /* Auto sleep enable */ +#define MAX310X_MODE1_IRQSEL_BIT (1 << 7) /* IRQ pin enable */ + +/* MODE2 register bits */ +#define MAX310X_MODE2_RST_BIT (1 << 0) /* Chip reset */ +#define MAX310X_MODE2_FIFORST_BIT (1 << 1) /* FIFO reset */ +#define MAX310X_MODE2_RXTRIGINV_BIT (1 << 2) /* RX FIFO INT invert */ +#define MAX310X_MODE2_RXEMPTINV_BIT (1 << 3) /* RX FIFO empty INT invert */ +#define MAX310X_MODE2_SPCHR_BIT (1 << 4) /* Special chr detect enable */ +#define MAX310X_MODE2_LOOPBACK_BIT (1 << 5) /* Internal loopback enable */ +#define MAX310X_MODE2_MULTIDROP_BIT (1 << 6) /* 9-bit multidrop enable */ +#define MAX310X_MODE2_ECHOSUPR_BIT (1 << 7) /* ECHO suppression enable */ + +/* LCR register bits */ +#define MAX310X_LCR_LENGTH0_BIT (1 << 0) /* Word length bit 0 */ +#define MAX310X_LCR_LENGTH1_BIT (1 << 1) /* Word length bit 1 + * + * Word length bits table: + * 00 -> 5 bit words + * 01 -> 6 bit words + * 10 -> 7 bit words + * 11 -> 8 bit words + */ +#define MAX310X_LCR_STOPLEN_BIT (1 << 2) /* STOP length bit + * + * STOP length bit table: + * 0 -> 1 stop bit + * 1 -> 1-1.5 stop bits if + * word length is 5, + * 2 stop bits otherwise + */ +#define MAX310X_LCR_PARITY_BIT (1 << 3) /* Parity bit enable */ +#define MAX310X_LCR_EVENPARITY_BIT (1 << 4) /* Even parity bit enable */ +#define MAX310X_LCR_FORCEPARITY_BIT (1 << 5) /* 9-bit multidrop parity */ +#define MAX310X_LCR_TXBREAK_BIT (1 << 6) /* TX break enable */ +#define MAX310X_LCR_RTS_BIT (1 << 7) /* RTS pin control */ + +/* IRDA register bits */ +#define MAX310X_IRDA_IRDAEN_BIT (1 << 0) /* IRDA mode enable */ +#define MAX310X_IRDA_SIR_BIT (1 << 1) /* SIR mode enable */ + +/* Flow control trigger level register masks */ +#define MAX310X_FLOWLVL_HALT_MASK (0x000f) /* Flow control halt level */ +#define MAX310X_FLOWLVL_RES_MASK (0x00f0) /* Flow control resume level */ +#define MAX310X_FLOWLVL_HALT(words) ((words / 8) & 0x0f) +#define MAX310X_FLOWLVL_RES(words) (((words / 8) & 0x0f) << 4) + +/* FIFO interrupt trigger level register masks */ +#define MAX310X_FIFOTRIGLVL_TX_MASK (0x0f) /* TX FIFO trigger level */ +#define MAX310X_FIFOTRIGLVL_RX_MASK (0xf0) /* RX FIFO trigger level */ +#define MAX310X_FIFOTRIGLVL_TX(words) ((words / 8) & 0x0f) +#define MAX310X_FIFOTRIGLVL_RX(words) (((words / 8) & 0x0f) << 4) + +/* Flow control register bits */ +#define MAX310X_FLOWCTRL_AUTORTS_BIT (1 << 0) /* Auto RTS flow ctrl enable */ +#define MAX310X_FLOWCTRL_AUTOCTS_BIT (1 << 1) /* Auto CTS flow ctrl enable */ +#define MAX310X_FLOWCTRL_GPIADDR_BIT (1 << 2) /* Enables that GPIO inputs + * are used in conjunction with + * XOFF2 for definition of + * special character */ +#define MAX310X_FLOWCTRL_SWFLOWEN_BIT (1 << 3) /* Auto SW flow ctrl enable */ +#define MAX310X_FLOWCTRL_SWFLOW0_BIT (1 << 4) /* SWFLOW bit 0 */ +#define MAX310X_FLOWCTRL_SWFLOW1_BIT (1 << 5) /* SWFLOW bit 1 + * + * SWFLOW bits 1 & 0 table: + * 00 -> no transmitter flow + * control + * 01 -> receiver compares + * XON2 and XOFF2 + * and controls + * transmitter + * 10 -> receiver compares + * XON1 and XOFF1 + * and controls + * transmitter + * 11 -> receiver compares + * XON1, XON2, XOFF1 and + * XOFF2 and controls + * transmitter + */ +#define MAX310X_FLOWCTRL_SWFLOW2_BIT (1 << 6) /* SWFLOW bit 2 */ +#define MAX310X_FLOWCTRL_SWFLOW3_BIT (1 << 7) /* SWFLOW bit 3 + * + * SWFLOW bits 3 & 2 table: + * 00 -> no received flow + * control + * 01 -> transmitter generates + * XON2 and XOFF2 + * 10 -> transmitter generates + * XON1 and XOFF1 + * 11 -> transmitter generates + * XON1, XON2, XOFF1 and + * XOFF2 + */ + +/* PLL configuration register masks */ +#define MAX310X_PLLCFG_PREDIV_MASK (0x3f) /* PLL predivision value */ +#define MAX310X_PLLCFG_PLLFACTOR_MASK (0xc0) /* PLL multiplication factor */ + +/* Baud rate generator configuration register bits */ +#define MAX310X_BRGCFG_2XMODE_BIT (1 << 4) /* Double baud rate */ +#define MAX310X_BRGCFG_4XMODE_BIT (1 << 5) /* Quadruple baud rate */ + +/* Clock source register bits */ +#define MAX310X_CLKSRC_CRYST_BIT (1 << 1) /* Crystal osc enable */ +#define MAX310X_CLKSRC_PLL_BIT (1 << 2) /* PLL enable */ +#define MAX310X_CLKSRC_PLLBYP_BIT (1 << 3) /* PLL bypass */ +#define MAX310X_CLKSRC_EXTCLK_BIT (1 << 4) /* External clock enable */ +#define MAX310X_CLKSRC_CLK2RTS_BIT (1 << 7) /* Baud clk to RTS pin */ + +/* Global commands */ +#define MAX310X_EXTREG_ENBL (0xce) +#define MAX310X_EXTREG_DSBL (0xcd) + +/* Misc definitions */ +#define MAX310X_FIFO_SIZE (128) +#define MAX310x_REV_MASK (0xf8) +#define MAX310X_WRITE_BIT 0x80 + +/* MAX3107 specific */ +#define MAX3107_REV_ID (0xa0) + +/* MAX3109 specific */ +#define MAX3109_REV_ID (0xc0) + +/* MAX14830 specific */ +#define MAX14830_BRGCFG_CLKDIS_BIT (1 << 6) /* Clock Disable */ +#define MAX14830_REV_ID (0xb0) + +struct max310x_devtype { + char name[9]; + int nr; + u8 mode1; + int (*detect)(struct device *); + void (*power)(struct uart_port *, int); +}; + +struct max310x_one { + struct uart_port port; + struct work_struct tx_work; + struct work_struct md_work; + struct work_struct rs_work; + + u8 wr_header; + u8 rd_header; + u8 rx_buf[MAX310X_FIFO_SIZE]; +}; +#define to_max310x_port(_port) \ + container_of(_port, struct max310x_one, port) + +struct max310x_port { + struct max310x_devtype *devtype; + struct regmap *regmap; + struct clk *clk; +#ifdef CONFIG_GPIOLIB + struct gpio_chip gpio; +#endif + struct max310x_one p[0]; +}; + +static struct uart_driver max310x_uart = { + .owner = THIS_MODULE, + .driver_name = MAX310X_NAME, + .dev_name = "ttyMAX", + .major = MAX310X_MAJOR, + .minor = MAX310X_MINOR, + .nr = MAX310X_UART_NRMAX, +}; + +static DECLARE_BITMAP(max310x_lines, MAX310X_UART_NRMAX); + +static u8 max310x_port_read(struct uart_port *port, u8 reg) +{ + struct max310x_port *s = dev_get_drvdata(port->dev); + unsigned int val = 0; + + regmap_read(s->regmap, port->iobase + reg, &val); + + return val; +} + +static void max310x_port_write(struct uart_port *port, u8 reg, u8 val) +{ + struct max310x_port *s = dev_get_drvdata(port->dev); + + regmap_write(s->regmap, port->iobase + reg, val); +} + +static void max310x_port_update(struct uart_port *port, u8 reg, u8 mask, u8 val) +{ + struct max310x_port *s = dev_get_drvdata(port->dev); + + regmap_update_bits(s->regmap, port->iobase + reg, mask, val); +} + +static int max3107_detect(struct device *dev) +{ + struct max310x_port *s = dev_get_drvdata(dev); + unsigned int val = 0; + int ret; + + ret = regmap_read(s->regmap, MAX310X_REVID_REG, &val); + if (ret) + return ret; + + if (((val & MAX310x_REV_MASK) != MAX3107_REV_ID)) { + dev_err(dev, + "%s ID 0x%02x does not match\n", s->devtype->name, val); + return -ENODEV; + } + + return 0; +} + +static int max3108_detect(struct device *dev) +{ + struct max310x_port *s = dev_get_drvdata(dev); + unsigned int val = 0; + int ret; + + /* MAX3108 have not REV ID register, we just check default value + * from clocksource register to make sure everything works. + */ + ret = regmap_read(s->regmap, MAX310X_CLKSRC_REG, &val); + if (ret) + return ret; + + if (val != (MAX310X_CLKSRC_EXTCLK_BIT | MAX310X_CLKSRC_PLLBYP_BIT)) { + dev_err(dev, "%s not present\n", s->devtype->name); + return -ENODEV; + } + + return 0; +} + +static int max3109_detect(struct device *dev) +{ + struct max310x_port *s = dev_get_drvdata(dev); + unsigned int val = 0; + int ret; + + ret = regmap_write(s->regmap, MAX310X_GLOBALCMD_REG, + MAX310X_EXTREG_ENBL); + if (ret) + return ret; + + regmap_read(s->regmap, MAX310X_REVID_EXTREG, &val); + regmap_write(s->regmap, MAX310X_GLOBALCMD_REG, MAX310X_EXTREG_DSBL); + if (((val & MAX310x_REV_MASK) != MAX3109_REV_ID)) { + dev_err(dev, + "%s ID 0x%02x does not match\n", s->devtype->name, val); + return -ENODEV; + } + + return 0; +} + +static void max310x_power(struct uart_port *port, int on) +{ + max310x_port_update(port, MAX310X_MODE1_REG, + MAX310X_MODE1_FORCESLEEP_BIT, + on ? 0 : MAX310X_MODE1_FORCESLEEP_BIT); + if (on) + msleep(50); +} + +static int max14830_detect(struct device *dev) +{ + struct max310x_port *s = dev_get_drvdata(dev); + unsigned int val = 0; + int ret; + + ret = regmap_write(s->regmap, MAX310X_GLOBALCMD_REG, + MAX310X_EXTREG_ENBL); + if (ret) + return ret; + + regmap_read(s->regmap, MAX310X_REVID_EXTREG, &val); + regmap_write(s->regmap, MAX310X_GLOBALCMD_REG, MAX310X_EXTREG_DSBL); + if (((val & MAX310x_REV_MASK) != MAX14830_REV_ID)) { + dev_err(dev, + "%s ID 0x%02x does not match\n", s->devtype->name, val); + return -ENODEV; + } + + return 0; +} + +static void max14830_power(struct uart_port *port, int on) +{ + max310x_port_update(port, MAX310X_BRGCFG_REG, + MAX14830_BRGCFG_CLKDIS_BIT, + on ? 0 : MAX14830_BRGCFG_CLKDIS_BIT); + if (on) + msleep(50); +} + +static const struct max310x_devtype max3107_devtype = { + .name = "MAX3107", + .nr = 1, + .mode1 = MAX310X_MODE1_AUTOSLEEP_BIT | MAX310X_MODE1_IRQSEL_BIT, + .detect = max3107_detect, + .power = max310x_power, +}; + +static const struct max310x_devtype max3108_devtype = { + .name = "MAX3108", + .nr = 1, + .mode1 = MAX310X_MODE1_AUTOSLEEP_BIT, + .detect = max3108_detect, + .power = max310x_power, +}; + +static const struct max310x_devtype max3109_devtype = { + .name = "MAX3109", + .nr = 2, + .mode1 = MAX310X_MODE1_AUTOSLEEP_BIT, + .detect = max3109_detect, + .power = max310x_power, +}; + +static const struct max310x_devtype max14830_devtype = { + .name = "MAX14830", + .nr = 4, + .mode1 = MAX310X_MODE1_IRQSEL_BIT, + .detect = max14830_detect, + .power = max14830_power, +}; + +static bool max310x_reg_writeable(struct device *dev, unsigned int reg) +{ + switch (reg & 0x1f) { + case MAX310X_IRQSTS_REG: + case MAX310X_LSR_IRQSTS_REG: + case MAX310X_SPCHR_IRQSTS_REG: + case MAX310X_STS_IRQSTS_REG: + case MAX310X_TXFIFOLVL_REG: + case MAX310X_RXFIFOLVL_REG: + return false; + default: + break; + } + + return true; +} + +static bool max310x_reg_volatile(struct device *dev, unsigned int reg) +{ + switch (reg & 0x1f) { + case MAX310X_RHR_REG: + case MAX310X_IRQSTS_REG: + case MAX310X_LSR_IRQSTS_REG: + case MAX310X_SPCHR_IRQSTS_REG: + case MAX310X_STS_IRQSTS_REG: + case MAX310X_TXFIFOLVL_REG: + case MAX310X_RXFIFOLVL_REG: + case MAX310X_GPIODATA_REG: + case MAX310X_BRGDIVLSB_REG: + case MAX310X_REG_05: + case MAX310X_REG_1F: + return true; + default: + break; + } + + return false; +} + +static bool max310x_reg_precious(struct device *dev, unsigned int reg) +{ + switch (reg & 0x1f) { + case MAX310X_RHR_REG: + case MAX310X_IRQSTS_REG: + case MAX310X_SPCHR_IRQSTS_REG: + case MAX310X_STS_IRQSTS_REG: + return true; + default: + break; + } + + return false; +} + +static int max310x_set_baud(struct uart_port *port, int baud) +{ + unsigned int mode = 0, div = 0, frac = 0, c = 0, F = 0; + + /* + * Calculate the integer divisor first. Select a proper mode + * in case if the requested baud is too high for the pre-defined + * clocks frequency. + */ + div = port->uartclk / baud; + if (div < 8) { + /* Mode x4 */ + c = 4; + mode = MAX310X_BRGCFG_4XMODE_BIT; + } else if (div < 16) { + /* Mode x2 */ + c = 8; + mode = MAX310X_BRGCFG_2XMODE_BIT; + } else { + c = 16; + } + + /* Calculate the divisor in accordance with the fraction coefficient */ + div /= c; + F = c*baud; + + /* Calculate the baud rate fraction */ + if (div > 0) + frac = (16*(port->uartclk % F)) / F; + else + div = 1; + + max310x_port_write(port, MAX310X_BRGDIVMSB_REG, div >> 8); + max310x_port_write(port, MAX310X_BRGDIVLSB_REG, div); + max310x_port_write(port, MAX310X_BRGCFG_REG, frac | mode); + + /* Return the actual baud rate we just programmed */ + return (16*port->uartclk) / (c*(16*div + frac)); +} + +static int max310x_update_best_err(unsigned long f, long *besterr) +{ + /* Use baudrate 115200 for calculate error */ + long err = f % (460800 * 16); + + if ((*besterr < 0) || (*besterr > err)) { + *besterr = err; + return 0; + } + + return 1; +} + +static int max310x_set_ref_clk(struct device *dev, struct max310x_port *s, + unsigned long freq, bool xtal) +{ + unsigned int div, clksrc, pllcfg = 0; + long besterr = -1; + unsigned long fdiv, fmul, bestfreq = freq; + + /* First, update error without PLL */ + max310x_update_best_err(freq, &besterr); + + /* Try all possible PLL dividers */ + for (div = 1; (div <= 63) && besterr; div++) { + fdiv = DIV_ROUND_CLOSEST(freq, div); + + /* Try multiplier 6 */ + fmul = fdiv * 6; + if ((fdiv >= 500000) && (fdiv <= 800000)) + if (!max310x_update_best_err(fmul, &besterr)) { + pllcfg = (0 << 6) | div; + bestfreq = fmul; + } + /* Try multiplier 48 */ + fmul = fdiv * 48; + if ((fdiv >= 850000) && (fdiv <= 1200000)) + if (!max310x_update_best_err(fmul, &besterr)) { + pllcfg = (1 << 6) | div; + bestfreq = fmul; + } + /* Try multiplier 96 */ + fmul = fdiv * 96; + if ((fdiv >= 425000) && (fdiv <= 1000000)) + if (!max310x_update_best_err(fmul, &besterr)) { + pllcfg = (2 << 6) | div; + bestfreq = fmul; + } + /* Try multiplier 144 */ + fmul = fdiv * 144; + if ((fdiv >= 390000) && (fdiv <= 667000)) + if (!max310x_update_best_err(fmul, &besterr)) { + pllcfg = (3 << 6) | div; + bestfreq = fmul; + } + } + + /* Configure clock source */ + clksrc = MAX310X_CLKSRC_EXTCLK_BIT | (xtal ? MAX310X_CLKSRC_CRYST_BIT : 0); + + /* Configure PLL */ + if (pllcfg) { + clksrc |= MAX310X_CLKSRC_PLL_BIT; + regmap_write(s->regmap, MAX310X_PLLCFG_REG, pllcfg); + } else + clksrc |= MAX310X_CLKSRC_PLLBYP_BIT; + + regmap_write(s->regmap, MAX310X_CLKSRC_REG, clksrc); + + /* Wait for crystal */ + if (xtal) { + unsigned int val; + msleep(10); + regmap_read(s->regmap, MAX310X_STS_IRQSTS_REG, &val); + if (!(val & MAX310X_STS_CLKREADY_BIT)) { + dev_warn(dev, "clock is not stable yet\n"); + } + } + + return (int)bestfreq; +} + +static void max310x_batch_write(struct uart_port *port, u8 *txbuf, unsigned int len) +{ + struct max310x_one *one = to_max310x_port(port); + struct spi_transfer xfer[] = { + { + .tx_buf = &one->wr_header, + .len = sizeof(one->wr_header), + }, { + .tx_buf = txbuf, + .len = len, + } + }; + spi_sync_transfer(to_spi_device(port->dev), xfer, ARRAY_SIZE(xfer)); +} + +static void max310x_batch_read(struct uart_port *port, u8 *rxbuf, unsigned int len) +{ + struct max310x_one *one = to_max310x_port(port); + struct spi_transfer xfer[] = { + { + .tx_buf = &one->rd_header, + .len = sizeof(one->rd_header), + }, { + .rx_buf = rxbuf, + .len = len, + } + }; + spi_sync_transfer(to_spi_device(port->dev), xfer, ARRAY_SIZE(xfer)); +} + +static void max310x_handle_rx(struct uart_port *port, unsigned int rxlen) +{ + struct max310x_one *one = to_max310x_port(port); + unsigned int sts, ch, flag, i; + + if (port->read_status_mask == MAX310X_LSR_RXOVR_BIT) { + /* We are just reading, happily ignoring any error conditions. + * Break condition, parity checking, framing errors -- they + * are all ignored. That means that we can do a batch-read. + * + * There is a small opportunity for race if the RX FIFO + * overruns while we're reading the buffer; the datasheets says + * that the LSR register applies to the "current" character. + * That's also the reason why we cannot do batched reads when + * asked to check the individual statuses. + * */ + + sts = max310x_port_read(port, MAX310X_LSR_IRQSTS_REG); + max310x_batch_read(port, one->rx_buf, rxlen); + + port->icount.rx += rxlen; + flag = TTY_NORMAL; + sts &= port->read_status_mask; + + if (sts & MAX310X_LSR_RXOVR_BIT) { + dev_warn_ratelimited(port->dev, "Hardware RX FIFO overrun\n"); + port->icount.overrun++; + } + + for (i = 0; i < (rxlen - 1); ++i) + uart_insert_char(port, sts, 0, one->rx_buf[i], flag); + + /* + * Handle the overrun case for the last character only, since + * the RxFIFO overflow happens after it is pushed to the FIFO + * tail. + */ + uart_insert_char(port, sts, MAX310X_LSR_RXOVR_BIT, + one->rx_buf[rxlen-1], flag); + + } else { + if (unlikely(rxlen >= port->fifosize)) { + dev_warn_ratelimited(port->dev, "Possible RX FIFO overrun\n"); + port->icount.buf_overrun++; + /* Ensure sanity of RX level */ + rxlen = port->fifosize; + } + + while (rxlen--) { + ch = max310x_port_read(port, MAX310X_RHR_REG); + sts = max310x_port_read(port, MAX310X_LSR_IRQSTS_REG); + + sts &= MAX310X_LSR_RXPAR_BIT | MAX310X_LSR_FRERR_BIT | + MAX310X_LSR_RXOVR_BIT | MAX310X_LSR_RXBRK_BIT; + + port->icount.rx++; + flag = TTY_NORMAL; + + if (unlikely(sts)) { + if (sts & MAX310X_LSR_RXBRK_BIT) { + port->icount.brk++; + if (uart_handle_break(port)) + continue; + } else if (sts & MAX310X_LSR_RXPAR_BIT) + port->icount.parity++; + else if (sts & MAX310X_LSR_FRERR_BIT) + port->icount.frame++; + else if (sts & MAX310X_LSR_RXOVR_BIT) + port->icount.overrun++; + + sts &= port->read_status_mask; + if (sts & MAX310X_LSR_RXBRK_BIT) + flag = TTY_BREAK; + else if (sts & MAX310X_LSR_RXPAR_BIT) + flag = TTY_PARITY; + else if (sts & MAX310X_LSR_FRERR_BIT) + flag = TTY_FRAME; + else if (sts & MAX310X_LSR_RXOVR_BIT) + flag = TTY_OVERRUN; + } + + if (uart_handle_sysrq_char(port, ch)) + continue; + + if (sts & port->ignore_status_mask) + continue; + + uart_insert_char(port, sts, MAX310X_LSR_RXOVR_BIT, ch, flag); + } + } + + tty_flip_buffer_push(&port->state->port); +} + +static void max310x_handle_tx(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + unsigned int txlen, to_send, until_end; + + if (unlikely(port->x_char)) { + max310x_port_write(port, MAX310X_THR_REG, port->x_char); + port->icount.tx++; + port->x_char = 0; + return; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) + return; + + /* Get length of data pending in circular buffer */ + to_send = uart_circ_chars_pending(xmit); + until_end = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); + if (likely(to_send)) { + /* Limit to size of TX FIFO */ + txlen = max310x_port_read(port, MAX310X_TXFIFOLVL_REG); + txlen = port->fifosize - txlen; + to_send = (to_send > txlen) ? txlen : to_send; + + if (until_end < to_send) { + /* It's a circ buffer -- wrap around. + * We could do that in one SPI transaction, but meh. */ + max310x_batch_write(port, xmit->buf + xmit->tail, until_end); + max310x_batch_write(port, xmit->buf, to_send - until_end); + } else { + max310x_batch_write(port, xmit->buf + xmit->tail, to_send); + } + + /* Add data to send */ + port->icount.tx += to_send; + xmit->tail = (xmit->tail + to_send) & (UART_XMIT_SIZE - 1); + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); +} + +static void max310x_start_tx(struct uart_port *port) +{ + struct max310x_one *one = to_max310x_port(port); + + schedule_work(&one->tx_work); +} + +static irqreturn_t max310x_port_irq(struct max310x_port *s, int portno) +{ + struct uart_port *port = &s->p[portno].port; + irqreturn_t res = IRQ_NONE; + + do { + unsigned int ists, lsr, rxlen; + + /* Read IRQ status & RX FIFO level */ + ists = max310x_port_read(port, MAX310X_IRQSTS_REG); + rxlen = max310x_port_read(port, MAX310X_RXFIFOLVL_REG); + if (!ists && !rxlen) + break; + + res = IRQ_HANDLED; + + if (ists & MAX310X_IRQ_CTS_BIT) { + lsr = max310x_port_read(port, MAX310X_LSR_IRQSTS_REG); + uart_handle_cts_change(port, + !!(lsr & MAX310X_LSR_CTS_BIT)); + } + if (rxlen) + max310x_handle_rx(port, rxlen); + if (ists & MAX310X_IRQ_TXEMPTY_BIT) + max310x_start_tx(port); + } while (1); + return res; +} + +static irqreturn_t max310x_ist(int irq, void *dev_id) +{ + struct max310x_port *s = (struct max310x_port *)dev_id; + bool handled = false; + + if (s->devtype->nr > 1) { + do { + unsigned int val = ~0; + + WARN_ON_ONCE(regmap_read(s->regmap, + MAX310X_GLOBALIRQ_REG, &val)); + val = ((1 << s->devtype->nr) - 1) & ~val; + if (!val) + break; + if (max310x_port_irq(s, fls(val) - 1) == IRQ_HANDLED) + handled = true; + } while (1); + } else { + if (max310x_port_irq(s, 0) == IRQ_HANDLED) + handled = true; + } + + return IRQ_RETVAL(handled); +} + +static void max310x_tx_proc(struct work_struct *ws) +{ + struct max310x_one *one = container_of(ws, struct max310x_one, tx_work); + + max310x_handle_tx(&one->port); +} + +static unsigned int max310x_tx_empty(struct uart_port *port) +{ + u8 lvl = max310x_port_read(port, MAX310X_TXFIFOLVL_REG); + + return lvl ? 0 : TIOCSER_TEMT; +} + +static unsigned int max310x_get_mctrl(struct uart_port *port) +{ + /* DCD and DSR are not wired and CTS/RTS is handled automatically + * so just indicate DSR and CAR asserted + */ + return TIOCM_DSR | TIOCM_CAR; +} + +static void max310x_md_proc(struct work_struct *ws) +{ + struct max310x_one *one = container_of(ws, struct max310x_one, md_work); + + max310x_port_update(&one->port, MAX310X_MODE2_REG, + MAX310X_MODE2_LOOPBACK_BIT, + (one->port.mctrl & TIOCM_LOOP) ? + MAX310X_MODE2_LOOPBACK_BIT : 0); +} + +static void max310x_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct max310x_one *one = to_max310x_port(port); + + schedule_work(&one->md_work); +} + +static void max310x_break_ctl(struct uart_port *port, int break_state) +{ + max310x_port_update(port, MAX310X_LCR_REG, + MAX310X_LCR_TXBREAK_BIT, + break_state ? MAX310X_LCR_TXBREAK_BIT : 0); +} + +static void max310x_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + unsigned int lcr = 0, flow = 0; + int baud; + + /* Mask termios capabilities we don't support */ + termios->c_cflag &= ~CMSPAR; + + /* Word size */ + switch (termios->c_cflag & CSIZE) { + case CS5: + break; + case CS6: + lcr = MAX310X_LCR_LENGTH0_BIT; + break; + case CS7: + lcr = MAX310X_LCR_LENGTH1_BIT; + break; + case CS8: + default: + lcr = MAX310X_LCR_LENGTH1_BIT | MAX310X_LCR_LENGTH0_BIT; + break; + } + + /* Parity */ + if (termios->c_cflag & PARENB) { + lcr |= MAX310X_LCR_PARITY_BIT; + if (!(termios->c_cflag & PARODD)) + lcr |= MAX310X_LCR_EVENPARITY_BIT; + } + + /* Stop bits */ + if (termios->c_cflag & CSTOPB) + lcr |= MAX310X_LCR_STOPLEN_BIT; /* 2 stops */ + + /* Update LCR register */ + max310x_port_write(port, MAX310X_LCR_REG, lcr); + + /* Set read status mask */ + port->read_status_mask = MAX310X_LSR_RXOVR_BIT; + if (termios->c_iflag & INPCK) + port->read_status_mask |= MAX310X_LSR_RXPAR_BIT | + MAX310X_LSR_FRERR_BIT; + if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) + port->read_status_mask |= MAX310X_LSR_RXBRK_BIT; + + /* Set status ignore mask */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNBRK) + port->ignore_status_mask |= MAX310X_LSR_RXBRK_BIT; + if (!(termios->c_cflag & CREAD)) + port->ignore_status_mask |= MAX310X_LSR_RXPAR_BIT | + MAX310X_LSR_RXOVR_BIT | + MAX310X_LSR_FRERR_BIT | + MAX310X_LSR_RXBRK_BIT; + + /* Configure flow control */ + max310x_port_write(port, MAX310X_XON1_REG, termios->c_cc[VSTART]); + max310x_port_write(port, MAX310X_XOFF1_REG, termios->c_cc[VSTOP]); + + /* Disable transmitter before enabling AutoCTS or auto transmitter + * flow control + */ + if (termios->c_cflag & CRTSCTS || termios->c_iflag & IXOFF) { + max310x_port_update(port, MAX310X_MODE1_REG, + MAX310X_MODE1_TXDIS_BIT, + MAX310X_MODE1_TXDIS_BIT); + } + + port->status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS | UPSTAT_AUTOXOFF); + + if (termios->c_cflag & CRTSCTS) { + /* Enable AUTORTS and AUTOCTS */ + port->status |= UPSTAT_AUTOCTS | UPSTAT_AUTORTS; + flow |= MAX310X_FLOWCTRL_AUTOCTS_BIT | + MAX310X_FLOWCTRL_AUTORTS_BIT; + } + if (termios->c_iflag & IXON) + flow |= MAX310X_FLOWCTRL_SWFLOW3_BIT | + MAX310X_FLOWCTRL_SWFLOWEN_BIT; + if (termios->c_iflag & IXOFF) { + port->status |= UPSTAT_AUTOXOFF; + flow |= MAX310X_FLOWCTRL_SWFLOW1_BIT | + MAX310X_FLOWCTRL_SWFLOWEN_BIT; + } + max310x_port_write(port, MAX310X_FLOWCTRL_REG, flow); + + /* Enable transmitter after disabling AutoCTS and auto transmitter + * flow control + */ + if (!(termios->c_cflag & CRTSCTS) && !(termios->c_iflag & IXOFF)) { + max310x_port_update(port, MAX310X_MODE1_REG, + MAX310X_MODE1_TXDIS_BIT, + 0); + } + + /* Get baud rate generator configuration */ + baud = uart_get_baud_rate(port, termios, old, + port->uartclk / 16 / 0xffff, + port->uartclk / 4); + + /* Setup baudrate generator */ + baud = max310x_set_baud(port, baud); + + /* Update timeout according to new baud rate */ + uart_update_timeout(port, termios->c_cflag, baud); +} + +static void max310x_rs_proc(struct work_struct *ws) +{ + struct max310x_one *one = container_of(ws, struct max310x_one, rs_work); + unsigned int delay, mode1 = 0, mode2 = 0; + + delay = (one->port.rs485.delay_rts_before_send << 4) | + one->port.rs485.delay_rts_after_send; + max310x_port_write(&one->port, MAX310X_HDPIXDELAY_REG, delay); + + if (one->port.rs485.flags & SER_RS485_ENABLED) { + mode1 = MAX310X_MODE1_TRNSCVCTRL_BIT; + + if (!(one->port.rs485.flags & SER_RS485_RX_DURING_TX)) + mode2 = MAX310X_MODE2_ECHOSUPR_BIT; + } + + max310x_port_update(&one->port, MAX310X_MODE1_REG, + MAX310X_MODE1_TRNSCVCTRL_BIT, mode1); + max310x_port_update(&one->port, MAX310X_MODE2_REG, + MAX310X_MODE2_ECHOSUPR_BIT, mode2); +} + +static int max310x_rs485_config(struct uart_port *port, + struct serial_rs485 *rs485) +{ + struct max310x_one *one = to_max310x_port(port); + + if ((rs485->delay_rts_before_send > 0x0f) || + (rs485->delay_rts_after_send > 0x0f)) + return -ERANGE; + + rs485->flags &= SER_RS485_RTS_ON_SEND | SER_RS485_RX_DURING_TX | + SER_RS485_ENABLED; + memset(rs485->padding, 0, sizeof(rs485->padding)); + port->rs485 = *rs485; + + schedule_work(&one->rs_work); + + return 0; +} + +static int max310x_startup(struct uart_port *port) +{ + struct max310x_port *s = dev_get_drvdata(port->dev); + unsigned int val; + + s->devtype->power(port, 1); + + /* Configure MODE1 register */ + max310x_port_update(port, MAX310X_MODE1_REG, + MAX310X_MODE1_TRNSCVCTRL_BIT, 0); + + /* Configure MODE2 register & Reset FIFOs*/ + val = MAX310X_MODE2_RXEMPTINV_BIT | MAX310X_MODE2_FIFORST_BIT; + max310x_port_write(port, MAX310X_MODE2_REG, val); + max310x_port_update(port, MAX310X_MODE2_REG, + MAX310X_MODE2_FIFORST_BIT, 0); + + /* Configure mode1/mode2 to have rs485/rs232 enabled at startup */ + val = (clamp(port->rs485.delay_rts_before_send, 0U, 15U) << 4) | + clamp(port->rs485.delay_rts_after_send, 0U, 15U); + max310x_port_write(port, MAX310X_HDPIXDELAY_REG, val); + + if (port->rs485.flags & SER_RS485_ENABLED) { + max310x_port_update(port, MAX310X_MODE1_REG, + MAX310X_MODE1_TRNSCVCTRL_BIT, + MAX310X_MODE1_TRNSCVCTRL_BIT); + + if (!(port->rs485.flags & SER_RS485_RX_DURING_TX)) + max310x_port_update(port, MAX310X_MODE2_REG, + MAX310X_MODE2_ECHOSUPR_BIT, + MAX310X_MODE2_ECHOSUPR_BIT); + } + + /* Configure flow control levels */ + /* Flow control halt level 96, resume level 48 */ + max310x_port_write(port, MAX310X_FLOWLVL_REG, + MAX310X_FLOWLVL_RES(48) | MAX310X_FLOWLVL_HALT(96)); + + /* Clear IRQ status register */ + max310x_port_read(port, MAX310X_IRQSTS_REG); + + /* Enable RX, TX, CTS change interrupts */ + val = MAX310X_IRQ_RXEMPTY_BIT | MAX310X_IRQ_TXEMPTY_BIT; + max310x_port_write(port, MAX310X_IRQEN_REG, val | MAX310X_IRQ_CTS_BIT); + + return 0; +} + +static void max310x_shutdown(struct uart_port *port) +{ + struct max310x_port *s = dev_get_drvdata(port->dev); + + /* Disable all interrupts */ + max310x_port_write(port, MAX310X_IRQEN_REG, 0); + + s->devtype->power(port, 0); +} + +static const char *max310x_type(struct uart_port *port) +{ + struct max310x_port *s = dev_get_drvdata(port->dev); + + return (port->type == PORT_MAX310X) ? s->devtype->name : NULL; +} + +static int max310x_request_port(struct uart_port *port) +{ + /* Do nothing */ + return 0; +} + +static void max310x_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) + port->type = PORT_MAX310X; +} + +static int max310x_verify_port(struct uart_port *port, struct serial_struct *s) +{ + if ((s->type != PORT_UNKNOWN) && (s->type != PORT_MAX310X)) + return -EINVAL; + if (s->irq != port->irq) + return -EINVAL; + + return 0; +} + +static void max310x_null_void(struct uart_port *port) +{ + /* Do nothing */ +} + +static const struct uart_ops max310x_ops = { + .tx_empty = max310x_tx_empty, + .set_mctrl = max310x_set_mctrl, + .get_mctrl = max310x_get_mctrl, + .stop_tx = max310x_null_void, + .start_tx = max310x_start_tx, + .stop_rx = max310x_null_void, + .break_ctl = max310x_break_ctl, + .startup = max310x_startup, + .shutdown = max310x_shutdown, + .set_termios = max310x_set_termios, + .type = max310x_type, + .request_port = max310x_request_port, + .release_port = max310x_null_void, + .config_port = max310x_config_port, + .verify_port = max310x_verify_port, +}; + +static int __maybe_unused max310x_suspend(struct device *dev) +{ + struct max310x_port *s = dev_get_drvdata(dev); + int i; + + for (i = 0; i < s->devtype->nr; i++) { + uart_suspend_port(&max310x_uart, &s->p[i].port); + s->devtype->power(&s->p[i].port, 0); + } + + return 0; +} + +static int __maybe_unused max310x_resume(struct device *dev) +{ + struct max310x_port *s = dev_get_drvdata(dev); + int i; + + for (i = 0; i < s->devtype->nr; i++) { + s->devtype->power(&s->p[i].port, 1); + uart_resume_port(&max310x_uart, &s->p[i].port); + } + + return 0; +} + +static SIMPLE_DEV_PM_OPS(max310x_pm_ops, max310x_suspend, max310x_resume); + +#ifdef CONFIG_GPIOLIB +static int max310x_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + unsigned int val; + struct max310x_port *s = gpiochip_get_data(chip); + struct uart_port *port = &s->p[offset / 4].port; + + val = max310x_port_read(port, MAX310X_GPIODATA_REG); + + return !!((val >> 4) & (1 << (offset % 4))); +} + +static void max310x_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct max310x_port *s = gpiochip_get_data(chip); + struct uart_port *port = &s->p[offset / 4].port; + + max310x_port_update(port, MAX310X_GPIODATA_REG, 1 << (offset % 4), + value ? 1 << (offset % 4) : 0); +} + +static int max310x_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + struct max310x_port *s = gpiochip_get_data(chip); + struct uart_port *port = &s->p[offset / 4].port; + + max310x_port_update(port, MAX310X_GPIOCFG_REG, 1 << (offset % 4), 0); + + return 0; +} + +static int max310x_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct max310x_port *s = gpiochip_get_data(chip); + struct uart_port *port = &s->p[offset / 4].port; + + max310x_port_update(port, MAX310X_GPIODATA_REG, 1 << (offset % 4), + value ? 1 << (offset % 4) : 0); + max310x_port_update(port, MAX310X_GPIOCFG_REG, 1 << (offset % 4), + 1 << (offset % 4)); + + return 0; +} + +static int max310x_gpio_set_config(struct gpio_chip *chip, unsigned int offset, + unsigned long config) +{ + struct max310x_port *s = gpiochip_get_data(chip); + struct uart_port *port = &s->p[offset / 4].port; + + switch (pinconf_to_config_param(config)) { + case PIN_CONFIG_DRIVE_OPEN_DRAIN: + max310x_port_update(port, MAX310X_GPIOCFG_REG, + 1 << ((offset % 4) + 4), + 1 << ((offset % 4) + 4)); + return 0; + case PIN_CONFIG_DRIVE_PUSH_PULL: + max310x_port_update(port, MAX310X_GPIOCFG_REG, + 1 << ((offset % 4) + 4), 0); + return 0; + default: + return -ENOTSUPP; + } +} +#endif + +static int max310x_probe(struct device *dev, struct max310x_devtype *devtype, + struct regmap *regmap, int irq) +{ + int i, ret, fmin, fmax, freq, uartclk; + struct clk *clk_osc, *clk_xtal; + struct max310x_port *s; + bool xtal = false; + + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + /* Alloc port structure */ + s = devm_kzalloc(dev, struct_size(s, p, devtype->nr), GFP_KERNEL); + if (!s) { + dev_err(dev, "Error allocating port structure\n"); + return -ENOMEM; + } + + clk_osc = devm_clk_get(dev, "osc"); + clk_xtal = devm_clk_get(dev, "xtal"); + if (!IS_ERR(clk_osc)) { + s->clk = clk_osc; + fmin = 500000; + fmax = 35000000; + } else if (!IS_ERR(clk_xtal)) { + s->clk = clk_xtal; + fmin = 1000000; + fmax = 4000000; + xtal = true; + } else if (PTR_ERR(clk_osc) == -EPROBE_DEFER || + PTR_ERR(clk_xtal) == -EPROBE_DEFER) { + return -EPROBE_DEFER; + } else { + dev_err(dev, "Cannot get clock\n"); + return -EINVAL; + } + + ret = clk_prepare_enable(s->clk); + if (ret) + return ret; + + freq = clk_get_rate(s->clk); + /* Check frequency limits */ + if (freq < fmin || freq > fmax) { + ret = -ERANGE; + goto out_clk; + } + + s->regmap = regmap; + s->devtype = devtype; + dev_set_drvdata(dev, s); + + /* Check device to ensure we are talking to what we expect */ + ret = devtype->detect(dev); + if (ret) + goto out_clk; + + for (i = 0; i < devtype->nr; i++) { + unsigned int offs = i << 5; + + /* Reset port */ + regmap_write(s->regmap, MAX310X_MODE2_REG + offs, + MAX310X_MODE2_RST_BIT); + /* Clear port reset */ + regmap_write(s->regmap, MAX310X_MODE2_REG + offs, 0); + + /* Wait for port startup */ + do { + regmap_read(s->regmap, + MAX310X_BRGDIVLSB_REG + offs, &ret); + } while (ret != 0x01); + + regmap_write(s->regmap, MAX310X_MODE1_REG + offs, + devtype->mode1); + } + + uartclk = max310x_set_ref_clk(dev, s, freq, xtal); + dev_dbg(dev, "Reference clock set to %i Hz\n", uartclk); + + for (i = 0; i < devtype->nr; i++) { + unsigned int line; + + line = find_first_zero_bit(max310x_lines, MAX310X_UART_NRMAX); + if (line == MAX310X_UART_NRMAX) { + ret = -ERANGE; + goto out_uart; + } + + /* Initialize port data */ + s->p[i].port.line = line; + s->p[i].port.dev = dev; + s->p[i].port.irq = irq; + s->p[i].port.type = PORT_MAX310X; + s->p[i].port.fifosize = MAX310X_FIFO_SIZE; + s->p[i].port.flags = UPF_FIXED_TYPE | UPF_LOW_LATENCY; + s->p[i].port.iotype = UPIO_PORT; + s->p[i].port.iobase = i * 0x20; + s->p[i].port.membase = (void __iomem *)~0; + s->p[i].port.uartclk = uartclk; + s->p[i].port.rs485_config = max310x_rs485_config; + s->p[i].port.ops = &max310x_ops; + /* Disable all interrupts */ + max310x_port_write(&s->p[i].port, MAX310X_IRQEN_REG, 0); + /* Clear IRQ status register */ + max310x_port_read(&s->p[i].port, MAX310X_IRQSTS_REG); + /* Initialize queue for start TX */ + INIT_WORK(&s->p[i].tx_work, max310x_tx_proc); + /* Initialize queue for changing LOOPBACK mode */ + INIT_WORK(&s->p[i].md_work, max310x_md_proc); + /* Initialize queue for changing RS485 mode */ + INIT_WORK(&s->p[i].rs_work, max310x_rs_proc); + /* Initialize SPI-transfer buffers */ + s->p[i].wr_header = (s->p[i].port.iobase + MAX310X_THR_REG) | + MAX310X_WRITE_BIT; + s->p[i].rd_header = (s->p[i].port.iobase + MAX310X_RHR_REG); + + /* Register port */ + ret = uart_add_one_port(&max310x_uart, &s->p[i].port); + if (ret) { + s->p[i].port.dev = NULL; + goto out_uart; + } + set_bit(line, max310x_lines); + + /* Go to suspend mode */ + devtype->power(&s->p[i].port, 0); + } + +#ifdef CONFIG_GPIOLIB + /* Setup GPIO cotroller */ + s->gpio.owner = THIS_MODULE; + s->gpio.parent = dev; + s->gpio.label = devtype->name; + s->gpio.direction_input = max310x_gpio_direction_input; + s->gpio.get = max310x_gpio_get; + s->gpio.direction_output= max310x_gpio_direction_output; + s->gpio.set = max310x_gpio_set; + s->gpio.set_config = max310x_gpio_set_config; + s->gpio.base = -1; + s->gpio.ngpio = devtype->nr * 4; + s->gpio.can_sleep = 1; + ret = devm_gpiochip_add_data(dev, &s->gpio, s); + if (ret) + goto out_uart; +#endif + + /* Setup interrupt */ + ret = devm_request_threaded_irq(dev, irq, NULL, max310x_ist, + IRQF_ONESHOT | IRQF_SHARED, dev_name(dev), s); + if (!ret) + return 0; + + dev_err(dev, "Unable to reguest IRQ %i\n", irq); + +out_uart: + for (i = 0; i < devtype->nr; i++) { + if (s->p[i].port.dev) { + uart_remove_one_port(&max310x_uart, &s->p[i].port); + clear_bit(s->p[i].port.line, max310x_lines); + } + } + +out_clk: + clk_disable_unprepare(s->clk); + + return ret; +} + +static int max310x_remove(struct device *dev) +{ + struct max310x_port *s = dev_get_drvdata(dev); + int i; + + for (i = 0; i < s->devtype->nr; i++) { + cancel_work_sync(&s->p[i].tx_work); + cancel_work_sync(&s->p[i].md_work); + cancel_work_sync(&s->p[i].rs_work); + uart_remove_one_port(&max310x_uart, &s->p[i].port); + clear_bit(s->p[i].port.line, max310x_lines); + s->devtype->power(&s->p[i].port, 0); + } + + clk_disable_unprepare(s->clk); + + return 0; +} + +static const struct of_device_id __maybe_unused max310x_dt_ids[] = { + { .compatible = "maxim,max3107", .data = &max3107_devtype, }, + { .compatible = "maxim,max3108", .data = &max3108_devtype, }, + { .compatible = "maxim,max3109", .data = &max3109_devtype, }, + { .compatible = "maxim,max14830", .data = &max14830_devtype }, + { } +}; +MODULE_DEVICE_TABLE(of, max310x_dt_ids); + +static struct regmap_config regcfg = { + .reg_bits = 8, + .val_bits = 8, + .write_flag_mask = MAX310X_WRITE_BIT, + .cache_type = REGCACHE_RBTREE, + .writeable_reg = max310x_reg_writeable, + .volatile_reg = max310x_reg_volatile, + .precious_reg = max310x_reg_precious, +}; + +#ifdef CONFIG_SPI_MASTER +static int max310x_spi_probe(struct spi_device *spi) +{ + struct max310x_devtype *devtype; + struct regmap *regmap; + int ret; + + /* Setup SPI bus */ + spi->bits_per_word = 8; + spi->mode = spi->mode ? : SPI_MODE_0; + spi->max_speed_hz = spi->max_speed_hz ? : 26000000; + ret = spi_setup(spi); + if (ret) + return ret; + + if (spi->dev.of_node) { + const struct of_device_id *of_id = + of_match_device(max310x_dt_ids, &spi->dev); + if (!of_id) + return -ENODEV; + + devtype = (struct max310x_devtype *)of_id->data; + } else { + const struct spi_device_id *id_entry = spi_get_device_id(spi); + + devtype = (struct max310x_devtype *)id_entry->driver_data; + } + + regcfg.max_register = devtype->nr * 0x20 - 1; + regmap = devm_regmap_init_spi(spi, ®cfg); + + return max310x_probe(&spi->dev, devtype, regmap, spi->irq); +} + +static int max310x_spi_remove(struct spi_device *spi) +{ + return max310x_remove(&spi->dev); +} + +static const struct spi_device_id max310x_id_table[] = { + { "max3107", (kernel_ulong_t)&max3107_devtype, }, + { "max3108", (kernel_ulong_t)&max3108_devtype, }, + { "max3109", (kernel_ulong_t)&max3109_devtype, }, + { "max14830", (kernel_ulong_t)&max14830_devtype, }, + { } +}; +MODULE_DEVICE_TABLE(spi, max310x_id_table); + +static struct spi_driver max310x_spi_driver = { + .driver = { + .name = MAX310X_NAME, + .of_match_table = of_match_ptr(max310x_dt_ids), + .pm = &max310x_pm_ops, + }, + .probe = max310x_spi_probe, + .remove = max310x_spi_remove, + .id_table = max310x_id_table, +}; +#endif + +static int __init max310x_uart_init(void) +{ + int ret; + + bitmap_zero(max310x_lines, MAX310X_UART_NRMAX); + + ret = uart_register_driver(&max310x_uart); + if (ret) + return ret; + +#ifdef CONFIG_SPI_MASTER + ret = spi_register_driver(&max310x_spi_driver); + if (ret) + uart_unregister_driver(&max310x_uart); +#endif + + return ret; +} +module_init(max310x_uart_init); + +static void __exit max310x_uart_exit(void) +{ +#ifdef CONFIG_SPI_MASTER + spi_unregister_driver(&max310x_spi_driver); +#endif + + uart_unregister_driver(&max310x_uart); +} +module_exit(max310x_uart_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Alexander Shiyan "); +MODULE_DESCRIPTION("MAX310X serial driver"); diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c new file mode 100644 index 000000000..09c88c48f --- /dev/null +++ b/drivers/tty/serial/mcf.c @@ -0,0 +1,706 @@ +// SPDX-License-Identifier: GPL-2.0+ +/****************************************************************************/ + +/* + * mcf.c -- Freescale ColdFire UART driver + * + * (C) Copyright 2003-2007, Greg Ungerer + */ + +/****************************************************************************/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/****************************************************************************/ + +/* + * Some boards implement the DTR/DCD lines using GPIO lines, most + * don't. Dummy out the access macros for those that don't. Those + * that do should define these macros somewhere in there board + * specific inlude files. + */ +#if !defined(mcf_getppdcd) +#define mcf_getppdcd(p) (1) +#endif +#if !defined(mcf_getppdtr) +#define mcf_getppdtr(p) (1) +#endif +#if !defined(mcf_setppdtr) +#define mcf_setppdtr(p, v) do { } while (0) +#endif + +/****************************************************************************/ + +/* + * Local per-uart structure. + */ +struct mcf_uart { + struct uart_port port; + unsigned int sigs; /* Local copy of line sigs */ + unsigned char imr; /* Local IMR mirror */ +}; + +/****************************************************************************/ + +static unsigned int mcf_tx_empty(struct uart_port *port) +{ + return (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXEMPTY) ? + TIOCSER_TEMT : 0; +} + +/****************************************************************************/ + +static unsigned int mcf_get_mctrl(struct uart_port *port) +{ + struct mcf_uart *pp = container_of(port, struct mcf_uart, port); + unsigned int sigs; + + sigs = (readb(port->membase + MCFUART_UIPR) & MCFUART_UIPR_CTS) ? + 0 : TIOCM_CTS; + sigs |= (pp->sigs & TIOCM_RTS); + sigs |= (mcf_getppdcd(port->line) ? TIOCM_CD : 0); + sigs |= (mcf_getppdtr(port->line) ? TIOCM_DTR : 0); + + return sigs; +} + +/****************************************************************************/ + +static void mcf_set_mctrl(struct uart_port *port, unsigned int sigs) +{ + struct mcf_uart *pp = container_of(port, struct mcf_uart, port); + + pp->sigs = sigs; + mcf_setppdtr(port->line, (sigs & TIOCM_DTR)); + if (sigs & TIOCM_RTS) + writeb(MCFUART_UOP_RTS, port->membase + MCFUART_UOP1); + else + writeb(MCFUART_UOP_RTS, port->membase + MCFUART_UOP0); +} + +/****************************************************************************/ + +static void mcf_start_tx(struct uart_port *port) +{ + struct mcf_uart *pp = container_of(port, struct mcf_uart, port); + + if (port->rs485.flags & SER_RS485_ENABLED) { + /* Enable Transmitter */ + writeb(MCFUART_UCR_TXENABLE, port->membase + MCFUART_UCR); + /* Manually assert RTS */ + writeb(MCFUART_UOP_RTS, port->membase + MCFUART_UOP1); + } + pp->imr |= MCFUART_UIR_TXREADY; + writeb(pp->imr, port->membase + MCFUART_UIMR); +} + +/****************************************************************************/ + +static void mcf_stop_tx(struct uart_port *port) +{ + struct mcf_uart *pp = container_of(port, struct mcf_uart, port); + + pp->imr &= ~MCFUART_UIR_TXREADY; + writeb(pp->imr, port->membase + MCFUART_UIMR); +} + +/****************************************************************************/ + +static void mcf_stop_rx(struct uart_port *port) +{ + struct mcf_uart *pp = container_of(port, struct mcf_uart, port); + + pp->imr &= ~MCFUART_UIR_RXREADY; + writeb(pp->imr, port->membase + MCFUART_UIMR); +} + +/****************************************************************************/ + +static void mcf_break_ctl(struct uart_port *port, int break_state) +{ + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + if (break_state == -1) + writeb(MCFUART_UCR_CMDBREAKSTART, port->membase + MCFUART_UCR); + else + writeb(MCFUART_UCR_CMDBREAKSTOP, port->membase + MCFUART_UCR); + spin_unlock_irqrestore(&port->lock, flags); +} + +/****************************************************************************/ + +static int mcf_startup(struct uart_port *port) +{ + struct mcf_uart *pp = container_of(port, struct mcf_uart, port); + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + /* Reset UART, get it into known state... */ + writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR); + writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR); + + /* Enable the UART transmitter and receiver */ + writeb(MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE, + port->membase + MCFUART_UCR); + + /* Enable RX interrupts now */ + pp->imr = MCFUART_UIR_RXREADY; + writeb(pp->imr, port->membase + MCFUART_UIMR); + + spin_unlock_irqrestore(&port->lock, flags); + + return 0; +} + +/****************************************************************************/ + +static void mcf_shutdown(struct uart_port *port) +{ + struct mcf_uart *pp = container_of(port, struct mcf_uart, port); + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + /* Disable all interrupts now */ + pp->imr = 0; + writeb(pp->imr, port->membase + MCFUART_UIMR); + + /* Disable UART transmitter and receiver */ + writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR); + writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR); + + spin_unlock_irqrestore(&port->lock, flags); +} + +/****************************************************************************/ + +static void mcf_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + unsigned long flags; + unsigned int baud, baudclk; +#if defined(CONFIG_M5272) + unsigned int baudfr; +#endif + unsigned char mr1, mr2; + + baud = uart_get_baud_rate(port, termios, old, 0, 230400); +#if defined(CONFIG_M5272) + baudclk = (MCF_BUSCLK / baud) / 32; + baudfr = (((MCF_BUSCLK / baud) + 1) / 2) % 16; +#else + baudclk = ((MCF_BUSCLK / baud) + 16) / 32; +#endif + + mr1 = MCFUART_MR1_RXIRQRDY | MCFUART_MR1_RXERRCHAR; + mr2 = 0; + + switch (termios->c_cflag & CSIZE) { + case CS5: mr1 |= MCFUART_MR1_CS5; break; + case CS6: mr1 |= MCFUART_MR1_CS6; break; + case CS7: mr1 |= MCFUART_MR1_CS7; break; + case CS8: + default: mr1 |= MCFUART_MR1_CS8; break; + } + + if (termios->c_cflag & PARENB) { + if (termios->c_cflag & CMSPAR) { + if (termios->c_cflag & PARODD) + mr1 |= MCFUART_MR1_PARITYMARK; + else + mr1 |= MCFUART_MR1_PARITYSPACE; + } else { + if (termios->c_cflag & PARODD) + mr1 |= MCFUART_MR1_PARITYODD; + else + mr1 |= MCFUART_MR1_PARITYEVEN; + } + } else { + mr1 |= MCFUART_MR1_PARITYNONE; + } + + /* + * FIXME: port->read_status_mask and port->ignore_status_mask + * need to be initialized based on termios settings for + * INPCK, IGNBRK, IGNPAR, PARMRK, BRKINT + */ + + if (termios->c_cflag & CSTOPB) + mr2 |= MCFUART_MR2_STOP2; + else + mr2 |= MCFUART_MR2_STOP1; + + if (termios->c_cflag & CRTSCTS) { + mr1 |= MCFUART_MR1_RXRTS; + mr2 |= MCFUART_MR2_TXCTS; + } + + spin_lock_irqsave(&port->lock, flags); + if (port->rs485.flags & SER_RS485_ENABLED) { + dev_dbg(port->dev, "Setting UART to RS485\n"); + mr2 |= MCFUART_MR2_TXRTS; + } + + uart_update_timeout(port, termios->c_cflag, baud); + writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR); + writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR); + writeb(MCFUART_UCR_CMDRESETMRPTR, port->membase + MCFUART_UCR); + writeb(mr1, port->membase + MCFUART_UMR); + writeb(mr2, port->membase + MCFUART_UMR); + writeb((baudclk & 0xff00) >> 8, port->membase + MCFUART_UBG1); + writeb((baudclk & 0xff), port->membase + MCFUART_UBG2); +#if defined(CONFIG_M5272) + writeb((baudfr & 0x0f), port->membase + MCFUART_UFPD); +#endif + writeb(MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER, + port->membase + MCFUART_UCSR); + writeb(MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE, + port->membase + MCFUART_UCR); + spin_unlock_irqrestore(&port->lock, flags); +} + +/****************************************************************************/ + +static void mcf_rx_chars(struct mcf_uart *pp) +{ + struct uart_port *port = &pp->port; + unsigned char status, ch, flag; + + while ((status = readb(port->membase + MCFUART_USR)) & MCFUART_USR_RXREADY) { + ch = readb(port->membase + MCFUART_URB); + flag = TTY_NORMAL; + port->icount.rx++; + + if (status & MCFUART_USR_RXERR) { + writeb(MCFUART_UCR_CMDRESETERR, + port->membase + MCFUART_UCR); + + if (status & MCFUART_USR_RXBREAK) { + port->icount.brk++; + if (uart_handle_break(port)) + continue; + } else if (status & MCFUART_USR_RXPARITY) { + port->icount.parity++; + } else if (status & MCFUART_USR_RXOVERRUN) { + port->icount.overrun++; + } else if (status & MCFUART_USR_RXFRAMING) { + port->icount.frame++; + } + + status &= port->read_status_mask; + + if (status & MCFUART_USR_RXBREAK) + flag = TTY_BREAK; + else if (status & MCFUART_USR_RXPARITY) + flag = TTY_PARITY; + else if (status & MCFUART_USR_RXFRAMING) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(port, ch)) + continue; + uart_insert_char(port, status, MCFUART_USR_RXOVERRUN, ch, flag); + } + + spin_unlock(&port->lock); + tty_flip_buffer_push(&port->state->port); + spin_lock(&port->lock); +} + +/****************************************************************************/ + +static void mcf_tx_chars(struct mcf_uart *pp) +{ + struct uart_port *port = &pp->port; + struct circ_buf *xmit = &port->state->xmit; + + if (port->x_char) { + /* Send special char - probably flow control */ + writeb(port->x_char, port->membase + MCFUART_UTB); + port->x_char = 0; + port->icount.tx++; + return; + } + + while (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY) { + if (xmit->head == xmit->tail) + break; + writeb(xmit->buf[xmit->tail], port->membase + MCFUART_UTB); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE -1); + port->icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (xmit->head == xmit->tail) { + pp->imr &= ~MCFUART_UIR_TXREADY; + writeb(pp->imr, port->membase + MCFUART_UIMR); + /* Disable TX to negate RTS automatically */ + if (port->rs485.flags & SER_RS485_ENABLED) + writeb(MCFUART_UCR_TXDISABLE, + port->membase + MCFUART_UCR); + } +} + +/****************************************************************************/ + +static irqreturn_t mcf_interrupt(int irq, void *data) +{ + struct uart_port *port = data; + struct mcf_uart *pp = container_of(port, struct mcf_uart, port); + unsigned int isr; + irqreturn_t ret = IRQ_NONE; + + isr = readb(port->membase + MCFUART_UISR) & pp->imr; + + spin_lock(&port->lock); + if (isr & MCFUART_UIR_RXREADY) { + mcf_rx_chars(pp); + ret = IRQ_HANDLED; + } + if (isr & MCFUART_UIR_TXREADY) { + mcf_tx_chars(pp); + ret = IRQ_HANDLED; + } + spin_unlock(&port->lock); + + return ret; +} + +/****************************************************************************/ + +static void mcf_config_port(struct uart_port *port, int flags) +{ + port->type = PORT_MCF; + port->fifosize = MCFUART_TXFIFOSIZE; + + /* Clear mask, so no surprise interrupts. */ + writeb(0, port->membase + MCFUART_UIMR); + + if (request_irq(port->irq, mcf_interrupt, 0, "UART", port)) + printk(KERN_ERR "MCF: unable to attach ColdFire UART %d " + "interrupt vector=%d\n", port->line, port->irq); +} + +/****************************************************************************/ + +static const char *mcf_type(struct uart_port *port) +{ + return (port->type == PORT_MCF) ? "ColdFire UART" : NULL; +} + +/****************************************************************************/ + +static int mcf_request_port(struct uart_port *port) +{ + /* UARTs always present */ + return 0; +} + +/****************************************************************************/ + +static void mcf_release_port(struct uart_port *port) +{ + /* Nothing to release... */ +} + +/****************************************************************************/ + +static int mcf_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + if ((ser->type != PORT_UNKNOWN) && (ser->type != PORT_MCF)) + return -EINVAL; + return 0; +} + +/****************************************************************************/ + +/* Enable or disable the RS485 support */ +static int mcf_config_rs485(struct uart_port *port, struct serial_rs485 *rs485) +{ + unsigned char mr1, mr2; + + /* Get mode registers */ + mr1 = readb(port->membase + MCFUART_UMR); + mr2 = readb(port->membase + MCFUART_UMR); + if (rs485->flags & SER_RS485_ENABLED) { + dev_dbg(port->dev, "Setting UART to RS485\n"); + /* Automatically negate RTS after TX completes */ + mr2 |= MCFUART_MR2_TXRTS; + } else { + dev_dbg(port->dev, "Setting UART to RS232\n"); + mr2 &= ~MCFUART_MR2_TXRTS; + } + writeb(mr1, port->membase + MCFUART_UMR); + writeb(mr2, port->membase + MCFUART_UMR); + port->rs485 = *rs485; + + return 0; +} + +/****************************************************************************/ + +/* + * Define the basic serial functions we support. + */ +static const struct uart_ops mcf_uart_ops = { + .tx_empty = mcf_tx_empty, + .get_mctrl = mcf_get_mctrl, + .set_mctrl = mcf_set_mctrl, + .start_tx = mcf_start_tx, + .stop_tx = mcf_stop_tx, + .stop_rx = mcf_stop_rx, + .break_ctl = mcf_break_ctl, + .startup = mcf_startup, + .shutdown = mcf_shutdown, + .set_termios = mcf_set_termios, + .type = mcf_type, + .request_port = mcf_request_port, + .release_port = mcf_release_port, + .config_port = mcf_config_port, + .verify_port = mcf_verify_port, +}; + +static struct mcf_uart mcf_ports[4]; + +#define MCF_MAXPORTS ARRAY_SIZE(mcf_ports) + +/****************************************************************************/ +#if defined(CONFIG_SERIAL_MCF_CONSOLE) +/****************************************************************************/ + +int __init early_mcf_setup(struct mcf_platform_uart *platp) +{ + struct uart_port *port; + int i; + + for (i = 0; ((i < MCF_MAXPORTS) && (platp[i].mapbase)); i++) { + port = &mcf_ports[i].port; + + port->line = i; + port->type = PORT_MCF; + port->mapbase = platp[i].mapbase; + port->membase = (platp[i].membase) ? platp[i].membase : + (unsigned char __iomem *) port->mapbase; + port->iotype = SERIAL_IO_MEM; + port->irq = platp[i].irq; + port->uartclk = MCF_BUSCLK; + port->flags = UPF_BOOT_AUTOCONF; + port->rs485_config = mcf_config_rs485; + port->ops = &mcf_uart_ops; + } + + return 0; +} + +/****************************************************************************/ + +static void mcf_console_putc(struct console *co, const char c) +{ + struct uart_port *port = &(mcf_ports + co->index)->port; + int i; + + for (i = 0; (i < 0x10000); i++) { + if (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY) + break; + } + writeb(c, port->membase + MCFUART_UTB); + for (i = 0; (i < 0x10000); i++) { + if (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY) + break; + } +} + +/****************************************************************************/ + +static void mcf_console_write(struct console *co, const char *s, unsigned int count) +{ + for (; (count); count--, s++) { + mcf_console_putc(co, *s); + if (*s == '\n') + mcf_console_putc(co, '\r'); + } +} + +/****************************************************************************/ + +static int __init mcf_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = CONFIG_SERIAL_MCF_BAUDRATE; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if ((co->index < 0) || (co->index >= MCF_MAXPORTS)) + co->index = 0; + port = &mcf_ports[co->index].port; + if (port->membase == 0) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +/****************************************************************************/ + +static struct uart_driver mcf_driver; + +static struct console mcf_console = { + .name = "ttyS", + .write = mcf_console_write, + .device = uart_console_device, + .setup = mcf_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &mcf_driver, +}; + +static int __init mcf_console_init(void) +{ + register_console(&mcf_console); + return 0; +} + +console_initcall(mcf_console_init); + +#define MCF_CONSOLE &mcf_console + +/****************************************************************************/ +#else +/****************************************************************************/ + +#define MCF_CONSOLE NULL + +/****************************************************************************/ +#endif /* CONFIG_SERIAL_MCF_CONSOLE */ +/****************************************************************************/ + +/* + * Define the mcf UART driver structure. + */ +static struct uart_driver mcf_driver = { + .owner = THIS_MODULE, + .driver_name = "mcf", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .nr = MCF_MAXPORTS, + .cons = MCF_CONSOLE, +}; + +/****************************************************************************/ + +static int mcf_probe(struct platform_device *pdev) +{ + struct mcf_platform_uart *platp = dev_get_platdata(&pdev->dev); + struct uart_port *port; + int i; + + for (i = 0; ((i < MCF_MAXPORTS) && (platp[i].mapbase)); i++) { + port = &mcf_ports[i].port; + + port->line = i; + port->type = PORT_MCF; + port->mapbase = platp[i].mapbase; + port->membase = (platp[i].membase) ? platp[i].membase : + (unsigned char __iomem *) platp[i].mapbase; + port->dev = &pdev->dev; + port->iotype = SERIAL_IO_MEM; + port->irq = platp[i].irq; + port->uartclk = MCF_BUSCLK; + port->ops = &mcf_uart_ops; + port->flags = UPF_BOOT_AUTOCONF; + port->rs485_config = mcf_config_rs485; + port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_MCF_CONSOLE); + + uart_add_one_port(&mcf_driver, port); + } + + return 0; +} + +/****************************************************************************/ + +static int mcf_remove(struct platform_device *pdev) +{ + struct uart_port *port; + int i; + + for (i = 0; (i < MCF_MAXPORTS); i++) { + port = &mcf_ports[i].port; + if (port) + uart_remove_one_port(&mcf_driver, port); + } + + return 0; +} + +/****************************************************************************/ + +static struct platform_driver mcf_platform_driver = { + .probe = mcf_probe, + .remove = mcf_remove, + .driver = { + .name = "mcfuart", + }, +}; + +/****************************************************************************/ + +static int __init mcf_init(void) +{ + int rc; + + printk("ColdFire internal UART serial driver\n"); + + rc = uart_register_driver(&mcf_driver); + if (rc) + return rc; + rc = platform_driver_register(&mcf_platform_driver); + if (rc) { + uart_unregister_driver(&mcf_driver); + return rc; + } + return 0; +} + +/****************************************************************************/ + +static void __exit mcf_exit(void) +{ + platform_driver_unregister(&mcf_platform_driver); + uart_unregister_driver(&mcf_driver); +} + +/****************************************************************************/ + +module_init(mcf_init); +module_exit(mcf_exit); + +MODULE_AUTHOR("Greg Ungerer "); +MODULE_DESCRIPTION("Freescale ColdFire UART driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:mcfuart"); + +/****************************************************************************/ diff --git a/drivers/tty/serial/men_z135_uart.c b/drivers/tty/serial/men_z135_uart.c new file mode 100644 index 000000000..9acae5f8f --- /dev/null +++ b/drivers/tty/serial/men_z135_uart.c @@ -0,0 +1,933 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * MEN 16z135 High Speed UART + * + * Copyright (C) 2014 MEN Mikroelektronik GmbH (www.men.de) + * Author: Johannes Thumshirn + */ +#define pr_fmt(fmt) KBUILD_MODNAME ":" fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MEN_Z135_MAX_PORTS 12 +#define MEN_Z135_BASECLK 29491200 +#define MEN_Z135_FIFO_SIZE 1024 +#define MEN_Z135_FIFO_WATERMARK 1020 + +#define MEN_Z135_STAT_REG 0x0 +#define MEN_Z135_RX_RAM 0x4 +#define MEN_Z135_TX_RAM 0x400 +#define MEN_Z135_RX_CTRL 0x800 +#define MEN_Z135_TX_CTRL 0x804 +#define MEN_Z135_CONF_REG 0x808 +#define MEN_Z135_UART_FREQ 0x80c +#define MEN_Z135_BAUD_REG 0x810 +#define MEN_Z135_TIMEOUT 0x814 + +#define IRQ_ID(x) ((x) & 0x1f) + +#define MEN_Z135_IER_RXCIEN BIT(0) /* RX Space IRQ */ +#define MEN_Z135_IER_TXCIEN BIT(1) /* TX Space IRQ */ +#define MEN_Z135_IER_RLSIEN BIT(2) /* Receiver Line Status IRQ */ +#define MEN_Z135_IER_MSIEN BIT(3) /* Modem Status IRQ */ +#define MEN_Z135_ALL_IRQS (MEN_Z135_IER_RXCIEN \ + | MEN_Z135_IER_RLSIEN \ + | MEN_Z135_IER_MSIEN \ + | MEN_Z135_IER_TXCIEN) + +#define MEN_Z135_MCR_DTR BIT(24) +#define MEN_Z135_MCR_RTS BIT(25) +#define MEN_Z135_MCR_OUT1 BIT(26) +#define MEN_Z135_MCR_OUT2 BIT(27) +#define MEN_Z135_MCR_LOOP BIT(28) +#define MEN_Z135_MCR_RCFC BIT(29) + +#define MEN_Z135_MSR_DCTS BIT(0) +#define MEN_Z135_MSR_DDSR BIT(1) +#define MEN_Z135_MSR_DRI BIT(2) +#define MEN_Z135_MSR_DDCD BIT(3) +#define MEN_Z135_MSR_CTS BIT(4) +#define MEN_Z135_MSR_DSR BIT(5) +#define MEN_Z135_MSR_RI BIT(6) +#define MEN_Z135_MSR_DCD BIT(7) + +#define MEN_Z135_LCR_SHIFT 8 /* LCR shift mask */ + +#define MEN_Z135_WL5 0 /* CS5 */ +#define MEN_Z135_WL6 1 /* CS6 */ +#define MEN_Z135_WL7 2 /* CS7 */ +#define MEN_Z135_WL8 3 /* CS8 */ + +#define MEN_Z135_STB_SHIFT 2 /* Stopbits */ +#define MEN_Z135_NSTB1 0 +#define MEN_Z135_NSTB2 1 + +#define MEN_Z135_PEN_SHIFT 3 /* Parity enable */ +#define MEN_Z135_PAR_DIS 0 +#define MEN_Z135_PAR_ENA 1 + +#define MEN_Z135_PTY_SHIFT 4 /* Parity type */ +#define MEN_Z135_PTY_ODD 0 +#define MEN_Z135_PTY_EVN 1 + +#define MEN_Z135_LSR_DR BIT(0) +#define MEN_Z135_LSR_OE BIT(1) +#define MEN_Z135_LSR_PE BIT(2) +#define MEN_Z135_LSR_FE BIT(3) +#define MEN_Z135_LSR_BI BIT(4) +#define MEN_Z135_LSR_THEP BIT(5) +#define MEN_Z135_LSR_TEXP BIT(6) +#define MEN_Z135_LSR_RXFIFOERR BIT(7) + +#define MEN_Z135_IRQ_ID_RLS BIT(0) +#define MEN_Z135_IRQ_ID_RDA BIT(1) +#define MEN_Z135_IRQ_ID_CTI BIT(2) +#define MEN_Z135_IRQ_ID_TSA BIT(3) +#define MEN_Z135_IRQ_ID_MST BIT(4) + +#define LCR(x) (((x) >> MEN_Z135_LCR_SHIFT) & 0xff) + +#define BYTES_TO_ALIGN(x) ((x) & 0x3) + +static int line; + +static int txlvl = 5; +module_param(txlvl, int, S_IRUGO); +MODULE_PARM_DESC(txlvl, "TX IRQ trigger level 0-7, default 5 (128 byte)"); + +static int rxlvl = 6; +module_param(rxlvl, int, S_IRUGO); +MODULE_PARM_DESC(rxlvl, "RX IRQ trigger level 0-7, default 6 (256 byte)"); + +static int align; +module_param(align, int, S_IRUGO); +MODULE_PARM_DESC(align, "Keep hardware FIFO write pointer aligned, default 0"); + +static uint rx_timeout; +module_param(rx_timeout, uint, S_IRUGO); +MODULE_PARM_DESC(rx_timeout, "RX timeout. " + "Timeout in seconds = (timeout_reg * baud_reg * 4) / freq_reg"); + +struct men_z135_port { + struct uart_port port; + struct mcb_device *mdev; + struct resource *mem; + unsigned char *rxbuf; + u32 stat_reg; + spinlock_t lock; + bool automode; +}; +#define to_men_z135(port) container_of((port), struct men_z135_port, port) + +/** + * men_z135_reg_set() - Set value in register + * @uart: The UART port + * @addr: Register address + * @val: value to set + */ +static inline void men_z135_reg_set(struct men_z135_port *uart, + u32 addr, u32 val) +{ + struct uart_port *port = &uart->port; + unsigned long flags; + u32 reg; + + spin_lock_irqsave(&uart->lock, flags); + + reg = ioread32(port->membase + addr); + reg |= val; + iowrite32(reg, port->membase + addr); + + spin_unlock_irqrestore(&uart->lock, flags); +} + +/** + * men_z135_reg_clr() - Unset value in register + * @uart: The UART port + * @addr: Register address + * @val: value to clear + */ +static void men_z135_reg_clr(struct men_z135_port *uart, + u32 addr, u32 val) +{ + struct uart_port *port = &uart->port; + unsigned long flags; + u32 reg; + + spin_lock_irqsave(&uart->lock, flags); + + reg = ioread32(port->membase + addr); + reg &= ~val; + iowrite32(reg, port->membase + addr); + + spin_unlock_irqrestore(&uart->lock, flags); +} + +/** + * men_z135_handle_modem_status() - Handle change of modem status + * @uart: The UART port + * + * Handle change of modem status register. This is done by reading the "delta" + * versions of DCD (Data Carrier Detect) and CTS (Clear To Send). + */ +static void men_z135_handle_modem_status(struct men_z135_port *uart) +{ + u8 msr; + + msr = (uart->stat_reg >> 8) & 0xff; + + if (msr & MEN_Z135_MSR_DDCD) + uart_handle_dcd_change(&uart->port, + msr & MEN_Z135_MSR_DCD); + if (msr & MEN_Z135_MSR_DCTS) + uart_handle_cts_change(&uart->port, + msr & MEN_Z135_MSR_CTS); +} + +static void men_z135_handle_lsr(struct men_z135_port *uart) +{ + struct uart_port *port = &uart->port; + u8 lsr; + + lsr = (uart->stat_reg >> 16) & 0xff; + + if (lsr & MEN_Z135_LSR_OE) + port->icount.overrun++; + if (lsr & MEN_Z135_LSR_PE) + port->icount.parity++; + if (lsr & MEN_Z135_LSR_FE) + port->icount.frame++; + if (lsr & MEN_Z135_LSR_BI) { + port->icount.brk++; + uart_handle_break(port); + } +} + +/** + * get_rx_fifo_content() - Get the number of bytes in RX FIFO + * @uart: The UART port + * + * Read RXC register from hardware and return current FIFO fill size. + */ +static u16 get_rx_fifo_content(struct men_z135_port *uart) +{ + struct uart_port *port = &uart->port; + u32 stat_reg; + u16 rxc; + u8 rxc_lo; + u8 rxc_hi; + + stat_reg = ioread32(port->membase + MEN_Z135_STAT_REG); + rxc_lo = stat_reg >> 24; + rxc_hi = (stat_reg & 0xC0) >> 6; + + rxc = rxc_lo | (rxc_hi << 8); + + return rxc; +} + +/** + * men_z135_handle_rx() - RX tasklet routine + * @uart: Pointer to struct men_z135_port + * + * Copy from RX FIFO and acknowledge number of bytes copied. + */ +static void men_z135_handle_rx(struct men_z135_port *uart) +{ + struct uart_port *port = &uart->port; + struct tty_port *tport = &port->state->port; + int copied; + u16 size; + int room; + + size = get_rx_fifo_content(uart); + + if (size == 0) + return; + + /* Avoid accidently accessing TX FIFO instead of RX FIFO. Last + * longword in RX FIFO cannot be read.(0x004-0x3FF) + */ + if (size > MEN_Z135_FIFO_WATERMARK) + size = MEN_Z135_FIFO_WATERMARK; + + room = tty_buffer_request_room(tport, size); + if (room != size) + dev_warn(&uart->mdev->dev, + "Not enough room in flip buffer, truncating to %d\n", + room); + + if (room == 0) + return; + + memcpy_fromio(uart->rxbuf, port->membase + MEN_Z135_RX_RAM, room); + /* Be sure to first copy all data and then acknowledge it */ + mb(); + iowrite32(room, port->membase + MEN_Z135_RX_CTRL); + + copied = tty_insert_flip_string(tport, uart->rxbuf, room); + if (copied != room) + dev_warn(&uart->mdev->dev, + "Only copied %d instead of %d bytes\n", + copied, room); + + port->icount.rx += copied; + + tty_flip_buffer_push(tport); + +} + +/** + * men_z135_handle_tx() - TX tasklet routine + * @uart: Pointer to struct men_z135_port + * + */ +static void men_z135_handle_tx(struct men_z135_port *uart) +{ + struct uart_port *port = &uart->port; + struct circ_buf *xmit = &port->state->xmit; + u32 txc; + u32 wptr; + int qlen; + int n; + int txfree; + int head; + int tail; + int s; + + if (uart_circ_empty(xmit)) + goto out; + + if (uart_tx_stopped(port)) + goto out; + + if (port->x_char) + goto out; + + /* calculate bytes to copy */ + qlen = uart_circ_chars_pending(xmit); + if (qlen <= 0) + goto out; + + wptr = ioread32(port->membase + MEN_Z135_TX_CTRL); + txc = (wptr >> 16) & 0x3ff; + wptr &= 0x3ff; + + if (txc > MEN_Z135_FIFO_WATERMARK) + txc = MEN_Z135_FIFO_WATERMARK; + + txfree = MEN_Z135_FIFO_WATERMARK - txc; + if (txfree <= 0) { + dev_err(&uart->mdev->dev, + "Not enough room in TX FIFO have %d, need %d\n", + txfree, qlen); + goto irq_en; + } + + /* if we're not aligned, it's better to copy only 1 or 2 bytes and + * then the rest. + */ + if (align && qlen >= 3 && BYTES_TO_ALIGN(wptr)) + n = 4 - BYTES_TO_ALIGN(wptr); + else if (qlen > txfree) + n = txfree; + else + n = qlen; + + if (n <= 0) + goto irq_en; + + head = xmit->head & (UART_XMIT_SIZE - 1); + tail = xmit->tail & (UART_XMIT_SIZE - 1); + + s = ((head >= tail) ? head : UART_XMIT_SIZE) - tail; + n = min(n, s); + + memcpy_toio(port->membase + MEN_Z135_TX_RAM, &xmit->buf[xmit->tail], n); + xmit->tail = (xmit->tail + n) & (UART_XMIT_SIZE - 1); + + iowrite32(n & 0x3ff, port->membase + MEN_Z135_TX_CTRL); + + port->icount.tx += n; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + +irq_en: + if (!uart_circ_empty(xmit)) + men_z135_reg_set(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_TXCIEN); + else + men_z135_reg_clr(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_TXCIEN); + +out: + return; + +} + +/** + * men_z135_intr() - Handle legacy IRQs + * @irq: The IRQ number + * @data: Pointer to UART port + * + * Check IIR register to find the cause of the interrupt and handle it. + * It is possible that multiple interrupts reason bits are set and reading + * the IIR is a destructive read, so we always need to check for all possible + * interrupts and handle them. + */ +static irqreturn_t men_z135_intr(int irq, void *data) +{ + struct men_z135_port *uart = (struct men_z135_port *)data; + struct uart_port *port = &uart->port; + bool handled = false; + int irq_id; + + uart->stat_reg = ioread32(port->membase + MEN_Z135_STAT_REG); + irq_id = IRQ_ID(uart->stat_reg); + + if (!irq_id) + goto out; + + spin_lock(&port->lock); + /* It's save to write to IIR[7:6] RXC[9:8] */ + iowrite8(irq_id, port->membase + MEN_Z135_STAT_REG); + + if (irq_id & MEN_Z135_IRQ_ID_RLS) { + men_z135_handle_lsr(uart); + handled = true; + } + + if (irq_id & (MEN_Z135_IRQ_ID_RDA | MEN_Z135_IRQ_ID_CTI)) { + if (irq_id & MEN_Z135_IRQ_ID_CTI) + dev_dbg(&uart->mdev->dev, "Character Timeout Indication\n"); + men_z135_handle_rx(uart); + handled = true; + } + + if (irq_id & MEN_Z135_IRQ_ID_TSA) { + men_z135_handle_tx(uart); + handled = true; + } + + if (irq_id & MEN_Z135_IRQ_ID_MST) { + men_z135_handle_modem_status(uart); + handled = true; + } + + spin_unlock(&port->lock); +out: + return IRQ_RETVAL(handled); +} + +/** + * men_z135_request_irq() - Request IRQ for 16z135 core + * @uart: z135 private uart port structure + * + * Request an IRQ for 16z135 to use. First try using MSI, if it fails + * fall back to using legacy interrupts. + */ +static int men_z135_request_irq(struct men_z135_port *uart) +{ + struct device *dev = &uart->mdev->dev; + struct uart_port *port = &uart->port; + int err = 0; + + err = request_irq(port->irq, men_z135_intr, IRQF_SHARED, + "men_z135_intr", uart); + if (err) + dev_err(dev, "Error %d getting interrupt\n", err); + + return err; +} + +/** + * men_z135_tx_empty() - Handle tx_empty call + * @port: The UART port + * + * This function tests whether the TX FIFO and shifter for the port + * described by @port is empty. + */ +static unsigned int men_z135_tx_empty(struct uart_port *port) +{ + u32 wptr; + u16 txc; + + wptr = ioread32(port->membase + MEN_Z135_TX_CTRL); + txc = (wptr >> 16) & 0x3ff; + + if (txc == 0) + return TIOCSER_TEMT; + else + return 0; +} + +/** + * men_z135_set_mctrl() - Set modem control lines + * @port: The UART port + * @mctrl: The modem control lines + * + * This function sets the modem control lines for a port described by @port + * to the state described by @mctrl + */ +static void men_z135_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + u32 old; + u32 conf_reg; + + conf_reg = old = ioread32(port->membase + MEN_Z135_CONF_REG); + if (mctrl & TIOCM_RTS) + conf_reg |= MEN_Z135_MCR_RTS; + else + conf_reg &= ~MEN_Z135_MCR_RTS; + + if (mctrl & TIOCM_DTR) + conf_reg |= MEN_Z135_MCR_DTR; + else + conf_reg &= ~MEN_Z135_MCR_DTR; + + if (mctrl & TIOCM_OUT1) + conf_reg |= MEN_Z135_MCR_OUT1; + else + conf_reg &= ~MEN_Z135_MCR_OUT1; + + if (mctrl & TIOCM_OUT2) + conf_reg |= MEN_Z135_MCR_OUT2; + else + conf_reg &= ~MEN_Z135_MCR_OUT2; + + if (mctrl & TIOCM_LOOP) + conf_reg |= MEN_Z135_MCR_LOOP; + else + conf_reg &= ~MEN_Z135_MCR_LOOP; + + if (conf_reg != old) + iowrite32(conf_reg, port->membase + MEN_Z135_CONF_REG); +} + +/** + * men_z135_get_mctrl() - Get modem control lines + * @port: The UART port + * + * Retruns the current state of modem control inputs. + */ +static unsigned int men_z135_get_mctrl(struct uart_port *port) +{ + unsigned int mctrl = 0; + u8 msr; + + msr = ioread8(port->membase + MEN_Z135_STAT_REG + 1); + + if (msr & MEN_Z135_MSR_CTS) + mctrl |= TIOCM_CTS; + if (msr & MEN_Z135_MSR_DSR) + mctrl |= TIOCM_DSR; + if (msr & MEN_Z135_MSR_RI) + mctrl |= TIOCM_RI; + if (msr & MEN_Z135_MSR_DCD) + mctrl |= TIOCM_CAR; + + return mctrl; +} + +/** + * men_z135_stop_tx() - Stop transmitting characters + * @port: The UART port + * + * Stop transmitting characters. This might be due to CTS line becomming + * inactive or the tty layer indicating we want to stop transmission due to + * an XOFF character. + */ +static void men_z135_stop_tx(struct uart_port *port) +{ + struct men_z135_port *uart = to_men_z135(port); + + men_z135_reg_clr(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_TXCIEN); +} + +/* + * men_z135_disable_ms() - Disable Modem Status + * port: The UART port + * + * Enable Modem Status IRQ. + */ +static void men_z135_disable_ms(struct uart_port *port) +{ + struct men_z135_port *uart = to_men_z135(port); + + men_z135_reg_clr(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_MSIEN); +} + +/** + * men_z135_start_tx() - Start transmitting characters + * @port: The UART port + * + * Start transmitting character. This actually doesn't transmit anything, but + * fires off the TX tasklet. + */ +static void men_z135_start_tx(struct uart_port *port) +{ + struct men_z135_port *uart = to_men_z135(port); + + if (uart->automode) + men_z135_disable_ms(port); + + men_z135_handle_tx(uart); +} + +/** + * men_z135_stop_rx() - Stop receiving characters + * @port: The UART port + * + * Stop receiving characters; the port is in the process of being closed. + */ +static void men_z135_stop_rx(struct uart_port *port) +{ + struct men_z135_port *uart = to_men_z135(port); + + men_z135_reg_clr(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_RXCIEN); +} + +/** + * men_z135_enable_ms() - Enable Modem Status + * @port: the port + * + * Enable Modem Status IRQ. + */ +static void men_z135_enable_ms(struct uart_port *port) +{ + struct men_z135_port *uart = to_men_z135(port); + + men_z135_reg_set(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_MSIEN); +} + +static int men_z135_startup(struct uart_port *port) +{ + struct men_z135_port *uart = to_men_z135(port); + int err; + u32 conf_reg = 0; + + err = men_z135_request_irq(uart); + if (err) + return -ENODEV; + + conf_reg = ioread32(port->membase + MEN_Z135_CONF_REG); + + /* Activate all but TX space available IRQ */ + conf_reg |= MEN_Z135_ALL_IRQS & ~MEN_Z135_IER_TXCIEN; + conf_reg &= ~(0xff << 16); + conf_reg |= (txlvl << 16); + conf_reg |= (rxlvl << 20); + + iowrite32(conf_reg, port->membase + MEN_Z135_CONF_REG); + + if (rx_timeout) + iowrite32(rx_timeout, port->membase + MEN_Z135_TIMEOUT); + + return 0; +} + +static void men_z135_shutdown(struct uart_port *port) +{ + struct men_z135_port *uart = to_men_z135(port); + u32 conf_reg = 0; + + conf_reg |= MEN_Z135_ALL_IRQS; + + men_z135_reg_clr(uart, MEN_Z135_CONF_REG, conf_reg); + + free_irq(uart->port.irq, uart); +} + +static void men_z135_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + struct men_z135_port *uart = to_men_z135(port); + unsigned int baud; + u32 conf_reg; + u32 bd_reg; + u32 uart_freq; + u8 lcr; + + conf_reg = ioread32(port->membase + MEN_Z135_CONF_REG); + lcr = LCR(conf_reg); + + /* byte size */ + switch (termios->c_cflag & CSIZE) { + case CS5: + lcr |= MEN_Z135_WL5; + break; + case CS6: + lcr |= MEN_Z135_WL6; + break; + case CS7: + lcr |= MEN_Z135_WL7; + break; + case CS8: + lcr |= MEN_Z135_WL8; + break; + } + + /* stop bits */ + if (termios->c_cflag & CSTOPB) + lcr |= MEN_Z135_NSTB2 << MEN_Z135_STB_SHIFT; + + /* parity */ + if (termios->c_cflag & PARENB) { + lcr |= MEN_Z135_PAR_ENA << MEN_Z135_PEN_SHIFT; + + if (termios->c_cflag & PARODD) + lcr |= MEN_Z135_PTY_ODD << MEN_Z135_PTY_SHIFT; + else + lcr |= MEN_Z135_PTY_EVN << MEN_Z135_PTY_SHIFT; + } else + lcr |= MEN_Z135_PAR_DIS << MEN_Z135_PEN_SHIFT; + + conf_reg |= MEN_Z135_IER_MSIEN; + if (termios->c_cflag & CRTSCTS) { + conf_reg |= MEN_Z135_MCR_RCFC; + uart->automode = true; + termios->c_cflag &= ~CLOCAL; + } else { + conf_reg &= ~MEN_Z135_MCR_RCFC; + uart->automode = false; + } + + termios->c_cflag &= ~CMSPAR; /* Mark/Space parity is not supported */ + + conf_reg |= lcr << MEN_Z135_LCR_SHIFT; + iowrite32(conf_reg, port->membase + MEN_Z135_CONF_REG); + + uart_freq = ioread32(port->membase + MEN_Z135_UART_FREQ); + if (uart_freq == 0) + uart_freq = MEN_Z135_BASECLK; + + baud = uart_get_baud_rate(port, termios, old, 0, uart_freq / 16); + + spin_lock_irq(&port->lock); + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, baud, baud); + + bd_reg = uart_freq / (4 * baud); + iowrite32(bd_reg, port->membase + MEN_Z135_BAUD_REG); + + uart_update_timeout(port, termios->c_cflag, baud); + spin_unlock_irq(&port->lock); +} + +static const char *men_z135_type(struct uart_port *port) +{ + return KBUILD_MODNAME; +} + +static void men_z135_release_port(struct uart_port *port) +{ + struct men_z135_port *uart = to_men_z135(port); + + iounmap(port->membase); + port->membase = NULL; + + mcb_release_mem(uart->mem); +} + +static int men_z135_request_port(struct uart_port *port) +{ + struct men_z135_port *uart = to_men_z135(port); + struct mcb_device *mdev = uart->mdev; + struct resource *mem; + + mem = mcb_request_mem(uart->mdev, dev_name(&mdev->dev)); + if (IS_ERR(mem)) + return PTR_ERR(mem); + + port->mapbase = mem->start; + uart->mem = mem; + + port->membase = ioremap(mem->start, resource_size(mem)); + if (port->membase == NULL) { + mcb_release_mem(mem); + return -ENOMEM; + } + + return 0; +} + +static void men_z135_config_port(struct uart_port *port, int type) +{ + port->type = PORT_MEN_Z135; + men_z135_request_port(port); +} + +static int men_z135_verify_port(struct uart_port *port, + struct serial_struct *serinfo) +{ + return -EINVAL; +} + +static const struct uart_ops men_z135_ops = { + .tx_empty = men_z135_tx_empty, + .set_mctrl = men_z135_set_mctrl, + .get_mctrl = men_z135_get_mctrl, + .stop_tx = men_z135_stop_tx, + .start_tx = men_z135_start_tx, + .stop_rx = men_z135_stop_rx, + .enable_ms = men_z135_enable_ms, + .startup = men_z135_startup, + .shutdown = men_z135_shutdown, + .set_termios = men_z135_set_termios, + .type = men_z135_type, + .release_port = men_z135_release_port, + .request_port = men_z135_request_port, + .config_port = men_z135_config_port, + .verify_port = men_z135_verify_port, +}; + +static struct uart_driver men_z135_driver = { + .owner = THIS_MODULE, + .driver_name = KBUILD_MODNAME, + .dev_name = "ttyHSU", + .major = 0, + .minor = 0, + .nr = MEN_Z135_MAX_PORTS, +}; + +/** + * men_z135_probe() - Probe a z135 instance + * @mdev: The MCB device + * @id: The MCB device ID + * + * men_z135_probe does the basic setup of hardware resources and registers the + * new uart port to the tty layer. + */ +static int men_z135_probe(struct mcb_device *mdev, + const struct mcb_device_id *id) +{ + struct men_z135_port *uart; + struct resource *mem; + struct device *dev; + int err; + + dev = &mdev->dev; + + uart = devm_kzalloc(dev, sizeof(struct men_z135_port), GFP_KERNEL); + if (!uart) + return -ENOMEM; + + uart->rxbuf = (unsigned char *)__get_free_page(GFP_KERNEL); + if (!uart->rxbuf) + return -ENOMEM; + + mem = &mdev->mem; + + mcb_set_drvdata(mdev, uart); + + uart->port.uartclk = MEN_Z135_BASECLK * 16; + uart->port.fifosize = MEN_Z135_FIFO_SIZE; + uart->port.iotype = UPIO_MEM; + uart->port.ops = &men_z135_ops; + uart->port.irq = mcb_get_irq(mdev); + uart->port.iotype = UPIO_MEM; + uart->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP; + uart->port.line = line++; + uart->port.dev = dev; + uart->port.type = PORT_MEN_Z135; + uart->port.mapbase = mem->start; + uart->port.membase = NULL; + uart->mdev = mdev; + + spin_lock_init(&uart->lock); + + err = uart_add_one_port(&men_z135_driver, &uart->port); + if (err) + goto err; + + return 0; + +err: + free_page((unsigned long) uart->rxbuf); + dev_err(dev, "Failed to add UART: %d\n", err); + + return err; +} + +/** + * men_z135_remove() - Remove a z135 instance from the system + * + * @mdev: The MCB device + */ +static void men_z135_remove(struct mcb_device *mdev) +{ + struct men_z135_port *uart = mcb_get_drvdata(mdev); + + line--; + uart_remove_one_port(&men_z135_driver, &uart->port); + free_page((unsigned long) uart->rxbuf); +} + +static const struct mcb_device_id men_z135_ids[] = { + { .device = 0x87 }, + { } +}; +MODULE_DEVICE_TABLE(mcb, men_z135_ids); + +static struct mcb_driver mcb_driver = { + .driver = { + .name = "z135-uart", + .owner = THIS_MODULE, + }, + .probe = men_z135_probe, + .remove = men_z135_remove, + .id_table = men_z135_ids, +}; + +/** + * men_z135_init() - Driver Registration Routine + * + * men_z135_init is the first routine called when the driver is loaded. All it + * does is register with the legacy MEN Chameleon subsystem. + */ +static int __init men_z135_init(void) +{ + int err; + + err = uart_register_driver(&men_z135_driver); + if (err) { + pr_err("Failed to register UART: %d\n", err); + return err; + } + + err = mcb_register_driver(&mcb_driver); + if (err) { + pr_err("Failed to register MCB driver: %d\n", err); + uart_unregister_driver(&men_z135_driver); + return err; + } + + return 0; +} +module_init(men_z135_init); + +/** + * men_z135_exit() - Driver Exit Routine + * + * men_z135_exit is called just before the driver is removed from memory. + */ +static void __exit men_z135_exit(void) +{ + mcb_unregister_driver(&mcb_driver); + uart_unregister_driver(&men_z135_driver); +} +module_exit(men_z135_exit); + +MODULE_AUTHOR("Johannes Thumshirn "); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("MEN 16z135 High Speed UART"); +MODULE_ALIAS("mcb:16z135"); +MODULE_IMPORT_NS(MCB); diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c new file mode 100644 index 000000000..bb66a3f06 --- /dev/null +++ b/drivers/tty/serial/meson_uart.c @@ -0,0 +1,875 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Based on meson_uart.c, by AMLOGIC, INC. + * + * Copyright (C) 2014 Carlo Caione + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Register offsets */ +#define AML_UART_WFIFO 0x00 +#define AML_UART_RFIFO 0x04 +#define AML_UART_CONTROL 0x08 +#define AML_UART_STATUS 0x0c +#define AML_UART_MISC 0x10 +#define AML_UART_REG5 0x14 + +/* AML_UART_CONTROL bits */ +#define AML_UART_TX_EN BIT(12) +#define AML_UART_RX_EN BIT(13) +#define AML_UART_TWO_WIRE_EN BIT(15) +#define AML_UART_STOP_BIT_LEN_MASK (0x03 << 16) +#define AML_UART_STOP_BIT_1SB (0x00 << 16) +#define AML_UART_STOP_BIT_2SB (0x01 << 16) +#define AML_UART_PARITY_TYPE BIT(18) +#define AML_UART_PARITY_EN BIT(19) +#define AML_UART_TX_RST BIT(22) +#define AML_UART_RX_RST BIT(23) +#define AML_UART_CLEAR_ERR BIT(24) +#define AML_UART_RX_INT_EN BIT(27) +#define AML_UART_TX_INT_EN BIT(28) +#define AML_UART_DATA_LEN_MASK (0x03 << 20) +#define AML_UART_DATA_LEN_8BIT (0x00 << 20) +#define AML_UART_DATA_LEN_7BIT (0x01 << 20) +#define AML_UART_DATA_LEN_6BIT (0x02 << 20) +#define AML_UART_DATA_LEN_5BIT (0x03 << 20) + +/* AML_UART_STATUS bits */ +#define AML_UART_PARITY_ERR BIT(16) +#define AML_UART_FRAME_ERR BIT(17) +#define AML_UART_TX_FIFO_WERR BIT(18) +#define AML_UART_RX_EMPTY BIT(20) +#define AML_UART_TX_FULL BIT(21) +#define AML_UART_TX_EMPTY BIT(22) +#define AML_UART_XMIT_BUSY BIT(25) +#define AML_UART_ERR (AML_UART_PARITY_ERR | \ + AML_UART_FRAME_ERR | \ + AML_UART_TX_FIFO_WERR) + +/* AML_UART_MISC bits */ +#define AML_UART_XMIT_IRQ(c) (((c) & 0xff) << 8) +#define AML_UART_RECV_IRQ(c) ((c) & 0xff) + +/* AML_UART_REG5 bits */ +#define AML_UART_BAUD_MASK 0x7fffff +#define AML_UART_BAUD_USE BIT(23) +#define AML_UART_BAUD_XTAL BIT(24) + +#define AML_UART_PORT_NUM 12 +#define AML_UART_PORT_OFFSET 6 +#define AML_UART_DEV_NAME "ttyAML" + +#define AML_UART_POLL_USEC 5 +#define AML_UART_TIMEOUT_USEC 10000 + +static struct uart_driver meson_uart_driver; + +static struct uart_port *meson_ports[AML_UART_PORT_NUM]; + +static void meson_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} + +static unsigned int meson_uart_get_mctrl(struct uart_port *port) +{ + return TIOCM_CTS; +} + +static unsigned int meson_uart_tx_empty(struct uart_port *port) +{ + u32 val; + + val = readl(port->membase + AML_UART_STATUS); + val &= (AML_UART_TX_EMPTY | AML_UART_XMIT_BUSY); + return (val == AML_UART_TX_EMPTY) ? TIOCSER_TEMT : 0; +} + +static void meson_uart_stop_tx(struct uart_port *port) +{ + u32 val; + + val = readl(port->membase + AML_UART_CONTROL); + val &= ~AML_UART_TX_INT_EN; + writel(val, port->membase + AML_UART_CONTROL); +} + +static void meson_uart_stop_rx(struct uart_port *port) +{ + u32 val; + + val = readl(port->membase + AML_UART_CONTROL); + val &= ~AML_UART_RX_EN; + writel(val, port->membase + AML_UART_CONTROL); +} + +static void meson_uart_shutdown(struct uart_port *port) +{ + unsigned long flags; + u32 val; + + free_irq(port->irq, port); + + spin_lock_irqsave(&port->lock, flags); + + val = readl(port->membase + AML_UART_CONTROL); + val &= ~AML_UART_RX_EN; + val &= ~(AML_UART_RX_INT_EN | AML_UART_TX_INT_EN); + writel(val, port->membase + AML_UART_CONTROL); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void meson_uart_start_tx(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + unsigned int ch; + u32 val; + + if (uart_tx_stopped(port)) { + meson_uart_stop_tx(port); + return; + } + + while (!(readl(port->membase + AML_UART_STATUS) & AML_UART_TX_FULL)) { + if (port->x_char) { + writel(port->x_char, port->membase + AML_UART_WFIFO); + port->icount.tx++; + port->x_char = 0; + continue; + } + + if (uart_circ_empty(xmit)) + break; + + ch = xmit->buf[xmit->tail]; + writel(ch, port->membase + AML_UART_WFIFO); + xmit->tail = (xmit->tail+1) & (SERIAL_XMIT_SIZE - 1); + port->icount.tx++; + } + + if (!uart_circ_empty(xmit)) { + val = readl(port->membase + AML_UART_CONTROL); + val |= AML_UART_TX_INT_EN; + writel(val, port->membase + AML_UART_CONTROL); + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); +} + +static void meson_receive_chars(struct uart_port *port) +{ + struct tty_port *tport = &port->state->port; + char flag; + u32 ostatus, status, ch, mode; + + do { + flag = TTY_NORMAL; + port->icount.rx++; + ostatus = status = readl(port->membase + AML_UART_STATUS); + + if (status & AML_UART_ERR) { + if (status & AML_UART_TX_FIFO_WERR) + port->icount.overrun++; + else if (status & AML_UART_FRAME_ERR) + port->icount.frame++; + else if (status & AML_UART_PARITY_ERR) + port->icount.frame++; + + mode = readl(port->membase + AML_UART_CONTROL); + mode |= AML_UART_CLEAR_ERR; + writel(mode, port->membase + AML_UART_CONTROL); + + /* It doesn't clear to 0 automatically */ + mode &= ~AML_UART_CLEAR_ERR; + writel(mode, port->membase + AML_UART_CONTROL); + + status &= port->read_status_mask; + if (status & AML_UART_FRAME_ERR) + flag = TTY_FRAME; + else if (status & AML_UART_PARITY_ERR) + flag = TTY_PARITY; + } + + ch = readl(port->membase + AML_UART_RFIFO); + ch &= 0xff; + + if ((ostatus & AML_UART_FRAME_ERR) && (ch == 0)) { + port->icount.brk++; + flag = TTY_BREAK; + if (uart_handle_break(port)) + continue; + } + + if (uart_handle_sysrq_char(port, ch)) + continue; + + if ((status & port->ignore_status_mask) == 0) + tty_insert_flip_char(tport, ch, flag); + + if (status & AML_UART_TX_FIFO_WERR) + tty_insert_flip_char(tport, 0, TTY_OVERRUN); + + } while (!(readl(port->membase + AML_UART_STATUS) & AML_UART_RX_EMPTY)); + + spin_unlock(&port->lock); + tty_flip_buffer_push(tport); + spin_lock(&port->lock); +} + +static irqreturn_t meson_uart_interrupt(int irq, void *dev_id) +{ + struct uart_port *port = (struct uart_port *)dev_id; + + spin_lock(&port->lock); + + if (!(readl(port->membase + AML_UART_STATUS) & AML_UART_RX_EMPTY)) + meson_receive_chars(port); + + if (!(readl(port->membase + AML_UART_STATUS) & AML_UART_TX_FULL)) { + if (readl(port->membase + AML_UART_CONTROL) & AML_UART_TX_INT_EN) + meson_uart_start_tx(port); + } + + spin_unlock(&port->lock); + + return IRQ_HANDLED; +} + +static const char *meson_uart_type(struct uart_port *port) +{ + return (port->type == PORT_MESON) ? "meson_uart" : NULL; +} + +/* + * This function is called only from probe() using a temporary io mapping + * in order to perform a reset before setting up the device. Since the + * temporarily mapped region was successfully requested, there can be no + * console on this port at this time. Hence it is not necessary for this + * function to acquire the port->lock. (Since there is no console on this + * port at this time, the port->lock is not initialized yet.) + */ +static void meson_uart_reset(struct uart_port *port) +{ + u32 val; + + val = readl(port->membase + AML_UART_CONTROL); + val |= (AML_UART_RX_RST | AML_UART_TX_RST | AML_UART_CLEAR_ERR); + writel(val, port->membase + AML_UART_CONTROL); + + val &= ~(AML_UART_RX_RST | AML_UART_TX_RST | AML_UART_CLEAR_ERR); + writel(val, port->membase + AML_UART_CONTROL); +} + +static int meson_uart_startup(struct uart_port *port) +{ + unsigned long flags; + u32 val; + int ret = 0; + + spin_lock_irqsave(&port->lock, flags); + + val = readl(port->membase + AML_UART_CONTROL); + val |= AML_UART_CLEAR_ERR; + writel(val, port->membase + AML_UART_CONTROL); + val &= ~AML_UART_CLEAR_ERR; + writel(val, port->membase + AML_UART_CONTROL); + + val |= (AML_UART_RX_EN | AML_UART_TX_EN); + writel(val, port->membase + AML_UART_CONTROL); + + val |= (AML_UART_RX_INT_EN | AML_UART_TX_INT_EN); + writel(val, port->membase + AML_UART_CONTROL); + + val = (AML_UART_RECV_IRQ(1) | AML_UART_XMIT_IRQ(port->fifosize / 2)); + writel(val, port->membase + AML_UART_MISC); + + spin_unlock_irqrestore(&port->lock, flags); + + ret = request_irq(port->irq, meson_uart_interrupt, 0, + port->name, port); + + return ret; +} + +static void meson_uart_change_speed(struct uart_port *port, unsigned long baud) +{ + u32 val; + + while (!meson_uart_tx_empty(port)) + cpu_relax(); + + if (port->uartclk == 24000000) { + val = ((port->uartclk / 3) / baud) - 1; + val |= AML_UART_BAUD_XTAL; + } else { + val = ((port->uartclk * 10 / (baud * 4) + 5) / 10) - 1; + } + val |= AML_UART_BAUD_USE; + writel(val, port->membase + AML_UART_REG5); +} + +static void meson_uart_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + unsigned int cflags, iflags, baud; + unsigned long flags; + u32 val; + + spin_lock_irqsave(&port->lock, flags); + + cflags = termios->c_cflag; + iflags = termios->c_iflag; + + val = readl(port->membase + AML_UART_CONTROL); + + val &= ~AML_UART_DATA_LEN_MASK; + switch (cflags & CSIZE) { + case CS8: + val |= AML_UART_DATA_LEN_8BIT; + break; + case CS7: + val |= AML_UART_DATA_LEN_7BIT; + break; + case CS6: + val |= AML_UART_DATA_LEN_6BIT; + break; + case CS5: + val |= AML_UART_DATA_LEN_5BIT; + break; + } + + if (cflags & PARENB) + val |= AML_UART_PARITY_EN; + else + val &= ~AML_UART_PARITY_EN; + + if (cflags & PARODD) + val |= AML_UART_PARITY_TYPE; + else + val &= ~AML_UART_PARITY_TYPE; + + val &= ~AML_UART_STOP_BIT_LEN_MASK; + if (cflags & CSTOPB) + val |= AML_UART_STOP_BIT_2SB; + else + val |= AML_UART_STOP_BIT_1SB; + + if (cflags & CRTSCTS) { + if (port->flags & UPF_HARD_FLOW) + val &= ~AML_UART_TWO_WIRE_EN; + else + termios->c_cflag &= ~CRTSCTS; + } else { + val |= AML_UART_TWO_WIRE_EN; + } + + writel(val, port->membase + AML_UART_CONTROL); + + baud = uart_get_baud_rate(port, termios, old, 50, 4000000); + meson_uart_change_speed(port, baud); + + port->read_status_mask = AML_UART_TX_FIFO_WERR; + if (iflags & INPCK) + port->read_status_mask |= AML_UART_PARITY_ERR | + AML_UART_FRAME_ERR; + + port->ignore_status_mask = 0; + if (iflags & IGNPAR) + port->ignore_status_mask |= AML_UART_PARITY_ERR | + AML_UART_FRAME_ERR; + + uart_update_timeout(port, termios->c_cflag, baud); + spin_unlock_irqrestore(&port->lock, flags); +} + +static int meson_uart_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + int ret = 0; + + if (port->type != PORT_MESON) + ret = -EINVAL; + if (port->irq != ser->irq) + ret = -EINVAL; + if (ser->baud_base < 9600) + ret = -EINVAL; + return ret; +} + +static void meson_uart_release_port(struct uart_port *port) +{ + devm_iounmap(port->dev, port->membase); + port->membase = NULL; + devm_release_mem_region(port->dev, port->mapbase, port->mapsize); +} + +static int meson_uart_request_port(struct uart_port *port) +{ + if (!devm_request_mem_region(port->dev, port->mapbase, port->mapsize, + dev_name(port->dev))) { + dev_err(port->dev, "Memory region busy\n"); + return -EBUSY; + } + + port->membase = devm_ioremap(port->dev, port->mapbase, + port->mapsize); + if (!port->membase) + return -ENOMEM; + + return 0; +} + +static void meson_uart_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_MESON; + meson_uart_request_port(port); + } +} + +#ifdef CONFIG_CONSOLE_POLL +/* + * Console polling routines for writing and reading from the uart while + * in an interrupt or debug context (i.e. kgdb). + */ + +static int meson_uart_poll_get_char(struct uart_port *port) +{ + u32 c; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + if (readl(port->membase + AML_UART_STATUS) & AML_UART_RX_EMPTY) + c = NO_POLL_CHAR; + else + c = readl(port->membase + AML_UART_RFIFO); + + spin_unlock_irqrestore(&port->lock, flags); + + return c; +} + +static void meson_uart_poll_put_char(struct uart_port *port, unsigned char c) +{ + unsigned long flags; + u32 reg; + int ret; + + spin_lock_irqsave(&port->lock, flags); + + /* Wait until FIFO is empty or timeout */ + ret = readl_poll_timeout_atomic(port->membase + AML_UART_STATUS, reg, + reg & AML_UART_TX_EMPTY, + AML_UART_POLL_USEC, + AML_UART_TIMEOUT_USEC); + if (ret == -ETIMEDOUT) { + dev_err(port->dev, "Timeout waiting for UART TX EMPTY\n"); + goto out; + } + + /* Write the character */ + writel(c, port->membase + AML_UART_WFIFO); + + /* Wait until FIFO is empty or timeout */ + ret = readl_poll_timeout_atomic(port->membase + AML_UART_STATUS, reg, + reg & AML_UART_TX_EMPTY, + AML_UART_POLL_USEC, + AML_UART_TIMEOUT_USEC); + if (ret == -ETIMEDOUT) + dev_err(port->dev, "Timeout waiting for UART TX EMPTY\n"); + +out: + spin_unlock_irqrestore(&port->lock, flags); +} + +#endif /* CONFIG_CONSOLE_POLL */ + +static const struct uart_ops meson_uart_ops = { + .set_mctrl = meson_uart_set_mctrl, + .get_mctrl = meson_uart_get_mctrl, + .tx_empty = meson_uart_tx_empty, + .start_tx = meson_uart_start_tx, + .stop_tx = meson_uart_stop_tx, + .stop_rx = meson_uart_stop_rx, + .startup = meson_uart_startup, + .shutdown = meson_uart_shutdown, + .set_termios = meson_uart_set_termios, + .type = meson_uart_type, + .config_port = meson_uart_config_port, + .request_port = meson_uart_request_port, + .release_port = meson_uart_release_port, + .verify_port = meson_uart_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = meson_uart_poll_get_char, + .poll_put_char = meson_uart_poll_put_char, +#endif +}; + +#ifdef CONFIG_SERIAL_MESON_CONSOLE +static void meson_uart_enable_tx_engine(struct uart_port *port) +{ + u32 val; + + val = readl(port->membase + AML_UART_CONTROL); + val |= AML_UART_TX_EN; + writel(val, port->membase + AML_UART_CONTROL); +} + +static void meson_console_putchar(struct uart_port *port, int ch) +{ + if (!port->membase) + return; + + while (readl(port->membase + AML_UART_STATUS) & AML_UART_TX_FULL) + cpu_relax(); + writel(ch, port->membase + AML_UART_WFIFO); +} + +static void meson_serial_port_write(struct uart_port *port, const char *s, + u_int count) +{ + unsigned long flags; + int locked; + u32 val, tmp; + + local_irq_save(flags); + if (port->sysrq) { + locked = 0; + } else if (oops_in_progress) { + locked = spin_trylock(&port->lock); + } else { + spin_lock(&port->lock); + locked = 1; + } + + val = readl(port->membase + AML_UART_CONTROL); + tmp = val & ~(AML_UART_TX_INT_EN | AML_UART_RX_INT_EN); + writel(tmp, port->membase + AML_UART_CONTROL); + + uart_console_write(port, s, count, meson_console_putchar); + writel(val, port->membase + AML_UART_CONTROL); + + if (locked) + spin_unlock(&port->lock); + local_irq_restore(flags); +} + +static void meson_serial_console_write(struct console *co, const char *s, + u_int count) +{ + struct uart_port *port; + + port = meson_ports[co->index]; + if (!port) + return; + + meson_serial_port_write(port, s, count); +} + +static int meson_serial_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index < 0 || co->index >= AML_UART_PORT_NUM) + return -EINVAL; + + port = meson_ports[co->index]; + if (!port || !port->membase) + return -ENODEV; + + meson_uart_enable_tx_engine(port); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct console meson_serial_console = { + .name = AML_UART_DEV_NAME, + .write = meson_serial_console_write, + .device = uart_console_device, + .setup = meson_serial_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &meson_uart_driver, +}; + +static int __init meson_serial_console_init(void) +{ + register_console(&meson_serial_console); + return 0; +} +console_initcall(meson_serial_console_init); + +static void meson_serial_early_console_write(struct console *co, + const char *s, + u_int count) +{ + struct earlycon_device *dev = co->data; + + meson_serial_port_write(&dev->port, s, count); +} + +static int __init +meson_serial_early_console_setup(struct earlycon_device *device, const char *opt) +{ + if (!device->port.membase) + return -ENODEV; + + meson_uart_enable_tx_engine(&device->port); + device->con->write = meson_serial_early_console_write; + return 0; +} +/* Legacy bindings, should be removed when no more used */ +OF_EARLYCON_DECLARE(meson, "amlogic,meson-uart", + meson_serial_early_console_setup); +/* Stable bindings */ +OF_EARLYCON_DECLARE(meson, "amlogic,meson-ao-uart", + meson_serial_early_console_setup); + +#define MESON_SERIAL_CONSOLE (&meson_serial_console) +#else +#define MESON_SERIAL_CONSOLE NULL +#endif + +static struct uart_driver meson_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "meson_uart", + .dev_name = AML_UART_DEV_NAME, + .nr = AML_UART_PORT_NUM, + .cons = MESON_SERIAL_CONSOLE, +}; + +static inline struct clk *meson_uart_probe_clock(struct device *dev, + const char *id) +{ + struct clk *clk = NULL; + int ret; + + clk = devm_clk_get(dev, id); + if (IS_ERR(clk)) + return clk; + + ret = clk_prepare_enable(clk); + if (ret) { + dev_err(dev, "couldn't enable clk\n"); + return ERR_PTR(ret); + } + + devm_add_action_or_reset(dev, + (void(*)(void *))clk_disable_unprepare, + clk); + + return clk; +} + +/* + * This function gets clocks in the legacy non-stable DT bindings. + * This code will be remove once all the platforms switch to the + * new DT bindings. + */ +static int meson_uart_probe_clocks_legacy(struct platform_device *pdev, + struct uart_port *port) +{ + struct clk *clk = NULL; + + clk = meson_uart_probe_clock(&pdev->dev, NULL); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + port->uartclk = clk_get_rate(clk); + + return 0; +} + +static int meson_uart_probe_clocks(struct platform_device *pdev, + struct uart_port *port) +{ + struct clk *clk_xtal = NULL; + struct clk *clk_pclk = NULL; + struct clk *clk_baud = NULL; + + clk_pclk = meson_uart_probe_clock(&pdev->dev, "pclk"); + if (IS_ERR(clk_pclk)) + return PTR_ERR(clk_pclk); + + clk_xtal = meson_uart_probe_clock(&pdev->dev, "xtal"); + if (IS_ERR(clk_xtal)) + return PTR_ERR(clk_xtal); + + clk_baud = meson_uart_probe_clock(&pdev->dev, "baud"); + if (IS_ERR(clk_baud)) + return PTR_ERR(clk_baud); + + port->uartclk = clk_get_rate(clk_baud); + + return 0; +} + +static int meson_uart_probe(struct platform_device *pdev) +{ + struct resource *res_mem; + struct uart_port *port; + u32 fifosize = 64; /* Default is 64, 128 for EE UART_0 */ + int ret = 0; + int irq; + bool has_rtscts; + + if (pdev->dev.of_node) + pdev->id = of_alias_get_id(pdev->dev.of_node, "serial"); + + if (pdev->id < 0) { + int id; + + for (id = AML_UART_PORT_OFFSET; id < AML_UART_PORT_NUM; id++) { + if (!meson_ports[id]) { + pdev->id = id; + break; + } + } + } + + if (pdev->id < 0 || pdev->id >= AML_UART_PORT_NUM) + return -EINVAL; + + res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res_mem) + return -ENODEV; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + of_property_read_u32(pdev->dev.of_node, "fifo-size", &fifosize); + has_rtscts = of_property_read_bool(pdev->dev.of_node, "uart-has-rtscts"); + + if (meson_ports[pdev->id]) { + dev_err(&pdev->dev, "port %d already allocated\n", pdev->id); + return -EBUSY; + } + + port = devm_kzalloc(&pdev->dev, sizeof(struct uart_port), GFP_KERNEL); + if (!port) + return -ENOMEM; + + /* Use legacy way until all platforms switch to new bindings */ + if (of_device_is_compatible(pdev->dev.of_node, "amlogic,meson-uart")) + ret = meson_uart_probe_clocks_legacy(pdev, port); + else + ret = meson_uart_probe_clocks(pdev, port); + + if (ret) + return ret; + + port->iotype = UPIO_MEM; + port->mapbase = res_mem->start; + port->mapsize = resource_size(res_mem); + port->irq = irq; + port->flags = UPF_BOOT_AUTOCONF | UPF_LOW_LATENCY; + if (has_rtscts) + port->flags |= UPF_HARD_FLOW; + port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_MESON_CONSOLE); + port->dev = &pdev->dev; + port->line = pdev->id; + port->type = PORT_MESON; + port->x_char = 0; + port->ops = &meson_uart_ops; + port->fifosize = fifosize; + + meson_ports[pdev->id] = port; + platform_set_drvdata(pdev, port); + + /* reset port before registering (and possibly registering console) */ + if (meson_uart_request_port(port) >= 0) { + meson_uart_reset(port); + meson_uart_release_port(port); + } + + ret = uart_add_one_port(&meson_uart_driver, port); + if (ret) + meson_ports[pdev->id] = NULL; + + return ret; +} + +static int meson_uart_remove(struct platform_device *pdev) +{ + struct uart_port *port; + + port = platform_get_drvdata(pdev); + uart_remove_one_port(&meson_uart_driver, port); + meson_ports[pdev->id] = NULL; + + return 0; +} + +static const struct of_device_id meson_uart_dt_match[] = { + /* Legacy bindings, should be removed when no more used */ + { .compatible = "amlogic,meson-uart" }, + /* Stable bindings */ + { .compatible = "amlogic,meson6-uart" }, + { .compatible = "amlogic,meson8-uart" }, + { .compatible = "amlogic,meson8b-uart" }, + { .compatible = "amlogic,meson-gx-uart" }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, meson_uart_dt_match); + +static struct platform_driver meson_uart_platform_driver = { + .probe = meson_uart_probe, + .remove = meson_uart_remove, + .driver = { + .name = "meson_uart", + .of_match_table = meson_uart_dt_match, + }, +}; + +static int __init meson_uart_init(void) +{ + int ret; + + ret = uart_register_driver(&meson_uart_driver); + if (ret) + return ret; + + ret = platform_driver_register(&meson_uart_platform_driver); + if (ret) + uart_unregister_driver(&meson_uart_driver); + + return ret; +} + +static void __exit meson_uart_exit(void) +{ + platform_driver_unregister(&meson_uart_platform_driver); + uart_unregister_driver(&meson_uart_driver); +} + +module_init(meson_uart_init); +module_exit(meson_uart_exit); + +MODULE_AUTHOR("Carlo Caione "); +MODULE_DESCRIPTION("Amlogic Meson serial port driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/milbeaut_usio.c b/drivers/tty/serial/milbeaut_usio.c new file mode 100644 index 000000000..8f2cab7f6 --- /dev/null +++ b/drivers/tty/serial/milbeaut_usio.c @@ -0,0 +1,611 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 Socionext Inc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define USIO_NAME "mlb-usio-uart" +#define USIO_UART_DEV_NAME "ttyUSI" + +static struct uart_port mlb_usio_ports[CONFIG_SERIAL_MILBEAUT_USIO_PORTS]; + +#define RX 0 +#define TX 1 +static int mlb_usio_irq[CONFIG_SERIAL_MILBEAUT_USIO_PORTS][2]; + +#define MLB_USIO_REG_SMR 0 +#define MLB_USIO_REG_SCR 1 +#define MLB_USIO_REG_ESCR 2 +#define MLB_USIO_REG_SSR 3 +#define MLB_USIO_REG_DR 4 +#define MLB_USIO_REG_BGR 6 +#define MLB_USIO_REG_FCR 12 +#define MLB_USIO_REG_FBYTE 14 + +#define MLB_USIO_SMR_SOE BIT(0) +#define MLB_USIO_SMR_SBL BIT(3) +#define MLB_USIO_SCR_TXE BIT(0) +#define MLB_USIO_SCR_RXE BIT(1) +#define MLB_USIO_SCR_TBIE BIT(2) +#define MLB_USIO_SCR_TIE BIT(3) +#define MLB_USIO_SCR_RIE BIT(4) +#define MLB_USIO_SCR_UPCL BIT(7) +#define MLB_USIO_ESCR_L_8BIT 0 +#define MLB_USIO_ESCR_L_5BIT 1 +#define MLB_USIO_ESCR_L_6BIT 2 +#define MLB_USIO_ESCR_L_7BIT 3 +#define MLB_USIO_ESCR_P BIT(3) +#define MLB_USIO_ESCR_PEN BIT(4) +#define MLB_USIO_ESCR_FLWEN BIT(7) +#define MLB_USIO_SSR_TBI BIT(0) +#define MLB_USIO_SSR_TDRE BIT(1) +#define MLB_USIO_SSR_RDRF BIT(2) +#define MLB_USIO_SSR_ORE BIT(3) +#define MLB_USIO_SSR_FRE BIT(4) +#define MLB_USIO_SSR_PE BIT(5) +#define MLB_USIO_SSR_REC BIT(7) +#define MLB_USIO_SSR_BRK BIT(8) +#define MLB_USIO_FCR_FE1 BIT(0) +#define MLB_USIO_FCR_FE2 BIT(1) +#define MLB_USIO_FCR_FCL1 BIT(2) +#define MLB_USIO_FCR_FCL2 BIT(3) +#define MLB_USIO_FCR_FSET BIT(4) +#define MLB_USIO_FCR_FTIE BIT(9) +#define MLB_USIO_FCR_FDRQ BIT(10) +#define MLB_USIO_FCR_FRIIE BIT(11) + +static void mlb_usio_stop_tx(struct uart_port *port) +{ + writew(readw(port->membase + MLB_USIO_REG_FCR) & ~MLB_USIO_FCR_FTIE, + port->membase + MLB_USIO_REG_FCR); + writeb(readb(port->membase + MLB_USIO_REG_SCR) & ~MLB_USIO_SCR_TBIE, + port->membase + MLB_USIO_REG_SCR); +} + +static void mlb_usio_tx_chars(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + int count; + + writew(readw(port->membase + MLB_USIO_REG_FCR) & ~MLB_USIO_FCR_FTIE, + port->membase + MLB_USIO_REG_FCR); + writeb(readb(port->membase + MLB_USIO_REG_SCR) & + ~(MLB_USIO_SCR_TIE | MLB_USIO_SCR_TBIE), + port->membase + MLB_USIO_REG_SCR); + + if (port->x_char) { + writew(port->x_char, port->membase + MLB_USIO_REG_DR); + port->icount.tx++; + port->x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + mlb_usio_stop_tx(port); + return; + } + + count = port->fifosize - + (readw(port->membase + MLB_USIO_REG_FBYTE) & 0xff); + + do { + writew(xmit->buf[xmit->tail], port->membase + MLB_USIO_REG_DR); + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + + } while (--count > 0); + + writew(readw(port->membase + MLB_USIO_REG_FCR) & ~MLB_USIO_FCR_FDRQ, + port->membase + MLB_USIO_REG_FCR); + + writeb(readb(port->membase + MLB_USIO_REG_SCR) | MLB_USIO_SCR_TBIE, + port->membase + MLB_USIO_REG_SCR); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + mlb_usio_stop_tx(port); +} + +static void mlb_usio_start_tx(struct uart_port *port) +{ + u16 fcr = readw(port->membase + MLB_USIO_REG_FCR); + + writew(fcr | MLB_USIO_FCR_FTIE, port->membase + MLB_USIO_REG_FCR); + if (!(fcr & MLB_USIO_FCR_FDRQ)) + return; + + writeb(readb(port->membase + MLB_USIO_REG_SCR) | MLB_USIO_SCR_TBIE, + port->membase + MLB_USIO_REG_SCR); + + if (readb(port->membase + MLB_USIO_REG_SSR) & MLB_USIO_SSR_TBI) + mlb_usio_tx_chars(port); +} + +static void mlb_usio_stop_rx(struct uart_port *port) +{ + writeb(readb(port->membase + MLB_USIO_REG_SCR) & ~MLB_USIO_SCR_RIE, + port->membase + MLB_USIO_REG_SCR); +} + +static void mlb_usio_enable_ms(struct uart_port *port) +{ + writeb(readb(port->membase + MLB_USIO_REG_SCR) | + MLB_USIO_SCR_RIE | MLB_USIO_SCR_RXE, + port->membase + MLB_USIO_REG_SCR); +} + +static void mlb_usio_rx_chars(struct uart_port *port) +{ + struct tty_port *ttyport = &port->state->port; + unsigned long flag = 0; + char ch = 0; + u8 status; + int max_count = 2; + + while (max_count--) { + status = readb(port->membase + MLB_USIO_REG_SSR); + + if (!(status & MLB_USIO_SSR_RDRF)) + break; + + if (!(status & (MLB_USIO_SSR_ORE | MLB_USIO_SSR_FRE | + MLB_USIO_SSR_PE))) { + ch = readw(port->membase + MLB_USIO_REG_DR); + flag = TTY_NORMAL; + port->icount.rx++; + if (uart_handle_sysrq_char(port, ch)) + continue; + uart_insert_char(port, status, MLB_USIO_SSR_ORE, + ch, flag); + continue; + } + if (status & MLB_USIO_SSR_PE) + port->icount.parity++; + if (status & MLB_USIO_SSR_ORE) + port->icount.overrun++; + status &= port->read_status_mask; + if (status & MLB_USIO_SSR_BRK) { + flag = TTY_BREAK; + ch = 0; + } else + if (status & MLB_USIO_SSR_PE) { + flag = TTY_PARITY; + ch = 0; + } else + if (status & MLB_USIO_SSR_FRE) { + flag = TTY_FRAME; + ch = 0; + } + if (flag) + uart_insert_char(port, status, MLB_USIO_SSR_ORE, + ch, flag); + + writeb(readb(port->membase + MLB_USIO_REG_SSR) | + MLB_USIO_SSR_REC, + port->membase + MLB_USIO_REG_SSR); + + max_count = readw(port->membase + MLB_USIO_REG_FBYTE) >> 8; + writew(readw(port->membase + MLB_USIO_REG_FCR) | + MLB_USIO_FCR_FE2 | MLB_USIO_FCR_FRIIE, + port->membase + MLB_USIO_REG_FCR); + } + + tty_flip_buffer_push(ttyport); +} + +static irqreturn_t mlb_usio_rx_irq(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + + spin_lock(&port->lock); + mlb_usio_rx_chars(port); + spin_unlock(&port->lock); + + return IRQ_HANDLED; +} + +static irqreturn_t mlb_usio_tx_irq(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + + spin_lock(&port->lock); + if (readb(port->membase + MLB_USIO_REG_SSR) & MLB_USIO_SSR_TBI) + mlb_usio_tx_chars(port); + spin_unlock(&port->lock); + + return IRQ_HANDLED; +} + +static unsigned int mlb_usio_tx_empty(struct uart_port *port) +{ + return (readb(port->membase + MLB_USIO_REG_SSR) & MLB_USIO_SSR_TBI) ? + TIOCSER_TEMT : 0; +} + +static void mlb_usio_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} + +static unsigned int mlb_usio_get_mctrl(struct uart_port *port) +{ + return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; + +} + +static void mlb_usio_break_ctl(struct uart_port *port, int break_state) +{ +} + +static int mlb_usio_startup(struct uart_port *port) +{ + const char *portname = to_platform_device(port->dev)->name; + unsigned long flags; + int ret, index = port->line; + unsigned char escr; + + ret = request_irq(mlb_usio_irq[index][RX], mlb_usio_rx_irq, + 0, portname, port); + if (ret) + return ret; + ret = request_irq(mlb_usio_irq[index][TX], mlb_usio_tx_irq, + 0, portname, port); + if (ret) { + free_irq(mlb_usio_irq[index][RX], port); + return ret; + } + + escr = readb(port->membase + MLB_USIO_REG_ESCR); + if (of_property_read_bool(port->dev->of_node, "auto-flow-control")) + escr |= MLB_USIO_ESCR_FLWEN; + spin_lock_irqsave(&port->lock, flags); + writeb(0, port->membase + MLB_USIO_REG_SCR); + writeb(escr, port->membase + MLB_USIO_REG_ESCR); + writeb(MLB_USIO_SCR_UPCL, port->membase + MLB_USIO_REG_SCR); + writeb(MLB_USIO_SSR_REC, port->membase + MLB_USIO_REG_SSR); + writew(0, port->membase + MLB_USIO_REG_FCR); + writew(MLB_USIO_FCR_FCL1 | MLB_USIO_FCR_FCL2, + port->membase + MLB_USIO_REG_FCR); + writew(MLB_USIO_FCR_FE1 | MLB_USIO_FCR_FE2 | MLB_USIO_FCR_FRIIE, + port->membase + MLB_USIO_REG_FCR); + writew(0, port->membase + MLB_USIO_REG_FBYTE); + writew(BIT(12), port->membase + MLB_USIO_REG_FBYTE); + + writeb(MLB_USIO_SCR_TXE | MLB_USIO_SCR_RIE | MLB_USIO_SCR_TBIE | + MLB_USIO_SCR_RXE, port->membase + MLB_USIO_REG_SCR); + spin_unlock_irqrestore(&port->lock, flags); + + return 0; +} + +static void mlb_usio_shutdown(struct uart_port *port) +{ + int index = port->line; + + free_irq(mlb_usio_irq[index][RX], port); + free_irq(mlb_usio_irq[index][TX], port); +} + +static void mlb_usio_set_termios(struct uart_port *port, + struct ktermios *termios, struct ktermios *old) +{ + unsigned int escr, smr = MLB_USIO_SMR_SOE; + unsigned long flags, baud, quot; + + switch (termios->c_cflag & CSIZE) { + case CS5: + escr = MLB_USIO_ESCR_L_5BIT; + break; + case CS6: + escr = MLB_USIO_ESCR_L_6BIT; + break; + case CS7: + escr = MLB_USIO_ESCR_L_7BIT; + break; + case CS8: + default: + escr = MLB_USIO_ESCR_L_8BIT; + break; + } + + if (termios->c_cflag & CSTOPB) + smr |= MLB_USIO_SMR_SBL; + + if (termios->c_cflag & PARENB) { + escr |= MLB_USIO_ESCR_PEN; + if (termios->c_cflag & PARODD) + escr |= MLB_USIO_ESCR_P; + } + /* Set hard flow control */ + if (of_property_read_bool(port->dev->of_node, "auto-flow-control") || + (termios->c_cflag & CRTSCTS)) + escr |= MLB_USIO_ESCR_FLWEN; + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk); + if (baud > 1) + quot = port->uartclk / baud - 1; + else + quot = 0; + + spin_lock_irqsave(&port->lock, flags); + uart_update_timeout(port, termios->c_cflag, baud); + port->read_status_mask = MLB_USIO_SSR_ORE | MLB_USIO_SSR_RDRF | + MLB_USIO_SSR_TDRE; + if (termios->c_iflag & INPCK) + port->read_status_mask |= MLB_USIO_SSR_FRE | MLB_USIO_SSR_PE; + + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= MLB_USIO_SSR_FRE | MLB_USIO_SSR_PE; + if ((termios->c_iflag & IGNBRK) && (termios->c_iflag & IGNPAR)) + port->ignore_status_mask |= MLB_USIO_SSR_ORE; + if ((termios->c_cflag & CREAD) == 0) + port->ignore_status_mask |= MLB_USIO_SSR_RDRF; + + writeb(0, port->membase + MLB_USIO_REG_SCR); + writeb(MLB_USIO_SCR_UPCL, port->membase + MLB_USIO_REG_SCR); + writeb(MLB_USIO_SSR_REC, port->membase + MLB_USIO_REG_SSR); + writew(0, port->membase + MLB_USIO_REG_FCR); + writeb(smr, port->membase + MLB_USIO_REG_SMR); + writeb(escr, port->membase + MLB_USIO_REG_ESCR); + writew(quot, port->membase + MLB_USIO_REG_BGR); + writew(0, port->membase + MLB_USIO_REG_FCR); + writew(MLB_USIO_FCR_FCL1 | MLB_USIO_FCR_FCL2 | MLB_USIO_FCR_FE1 | + MLB_USIO_FCR_FE2 | MLB_USIO_FCR_FRIIE, + port->membase + MLB_USIO_REG_FCR); + writew(0, port->membase + MLB_USIO_REG_FBYTE); + writew(BIT(12), port->membase + MLB_USIO_REG_FBYTE); + writeb(MLB_USIO_SCR_RIE | MLB_USIO_SCR_RXE | MLB_USIO_SCR_TBIE | + MLB_USIO_SCR_TXE, port->membase + MLB_USIO_REG_SCR); + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *mlb_usio_type(struct uart_port *port) +{ + return ((port->type == PORT_MLB_USIO) ? USIO_NAME : NULL); +} + +static void mlb_usio_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) + port->type = PORT_MLB_USIO; +} + +static const struct uart_ops mlb_usio_ops = { + .tx_empty = mlb_usio_tx_empty, + .set_mctrl = mlb_usio_set_mctrl, + .get_mctrl = mlb_usio_get_mctrl, + .stop_tx = mlb_usio_stop_tx, + .start_tx = mlb_usio_start_tx, + .stop_rx = mlb_usio_stop_rx, + .enable_ms = mlb_usio_enable_ms, + .break_ctl = mlb_usio_break_ctl, + .startup = mlb_usio_startup, + .shutdown = mlb_usio_shutdown, + .set_termios = mlb_usio_set_termios, + .type = mlb_usio_type, + .config_port = mlb_usio_config_port, +}; + +#ifdef CONFIG_SERIAL_MILBEAUT_USIO_CONSOLE + +static void mlb_usio_console_putchar(struct uart_port *port, int c) +{ + while (!(readb(port->membase + MLB_USIO_REG_SSR) & MLB_USIO_SSR_TDRE)) + cpu_relax(); + + writew(c, port->membase + MLB_USIO_REG_DR); +} + +static void mlb_usio_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_port *port = &mlb_usio_ports[co->index]; + + uart_console_write(port, s, count, mlb_usio_console_putchar); +} + +static int __init mlb_usio_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 115200; + int parity = 'n'; + int flow = 'n'; + int bits = 8; + + if (co->index >= CONFIG_SERIAL_MILBEAUT_USIO_PORTS) + return -ENODEV; + + port = &mlb_usio_ports[co->index]; + if (!port->membase) + return -ENODEV; + + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + if (of_property_read_bool(port->dev->of_node, "auto-flow-control")) + flow = 'r'; + + return uart_set_options(port, co, baud, parity, bits, flow); +} + + +static struct uart_driver mlb_usio_uart_driver; +static struct console mlb_usio_console = { + .name = USIO_UART_DEV_NAME, + .write = mlb_usio_console_write, + .device = uart_console_device, + .setup = mlb_usio_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &mlb_usio_uart_driver, +}; + +static int __init mlb_usio_console_init(void) +{ + register_console(&mlb_usio_console); + return 0; +} +console_initcall(mlb_usio_console_init); + + +static void mlb_usio_early_console_write(struct console *co, const char *s, + u_int count) +{ + struct earlycon_device *dev = co->data; + + uart_console_write(&dev->port, s, count, mlb_usio_console_putchar); +} + +static int __init mlb_usio_early_console_setup(struct earlycon_device *device, + const char *opt) +{ + if (!device->port.membase) + return -ENODEV; + device->con->write = mlb_usio_early_console_write; + return 0; +} + +OF_EARLYCON_DECLARE(mlb_usio, "socionext,milbeaut-usio-uart", + mlb_usio_early_console_setup); + +#define USIO_CONSOLE (&mlb_usio_console) +#else +#define USIO_CONSOLE NULL +#endif + +static struct uart_driver mlb_usio_uart_driver = { + .owner = THIS_MODULE, + .driver_name = USIO_NAME, + .dev_name = USIO_UART_DEV_NAME, + .cons = USIO_CONSOLE, + .nr = CONFIG_SERIAL_MILBEAUT_USIO_PORTS, +}; + +static int mlb_usio_probe(struct platform_device *pdev) +{ + struct clk *clk = devm_clk_get(&pdev->dev, NULL); + struct uart_port *port; + struct resource *res; + int index = 0; + int ret; + + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "Missing clock\n"); + return PTR_ERR(clk); + } + ret = clk_prepare_enable(clk); + if (ret) { + dev_err(&pdev->dev, "Clock enable failed: %d\n", ret); + return ret; + } + of_property_read_u32(pdev->dev.of_node, "index", &index); + port = &mlb_usio_ports[index]; + + port->private_data = (void *)clk; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "Missing regs\n"); + ret = -ENODEV; + goto failed; + } + port->membase = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); + + ret = platform_get_irq_byname(pdev, "rx"); + mlb_usio_irq[index][RX] = ret; + + ret = platform_get_irq_byname(pdev, "tx"); + mlb_usio_irq[index][TX] = ret; + + port->irq = mlb_usio_irq[index][RX]; + port->uartclk = clk_get_rate(clk); + port->fifosize = 128; + port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_MILBEAUT_USIO_CONSOLE); + port->iotype = UPIO_MEM32; + port->flags = UPF_BOOT_AUTOCONF | UPF_SPD_VHI; + port->line = index; + port->ops = &mlb_usio_ops; + port->dev = &pdev->dev; + + ret = uart_add_one_port(&mlb_usio_uart_driver, port); + if (ret) { + dev_err(&pdev->dev, "Adding port failed: %d\n", ret); + goto failed; + } + return 0; + +failed: + clk_disable_unprepare(clk); + + return ret; +} + +static int mlb_usio_remove(struct platform_device *pdev) +{ + struct uart_port *port = &mlb_usio_ports[pdev->id]; + struct clk *clk = port->private_data; + + uart_remove_one_port(&mlb_usio_uart_driver, port); + clk_disable_unprepare(clk); + + return 0; +} + +static const struct of_device_id mlb_usio_dt_ids[] = { + { .compatible = "socionext,milbeaut-usio-uart" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, mlb_usio_dt_ids); + +static struct platform_driver mlb_usio_driver = { + .probe = mlb_usio_probe, + .remove = mlb_usio_remove, + .driver = { + .name = USIO_NAME, + .of_match_table = mlb_usio_dt_ids, + }, +}; + +static int __init mlb_usio_init(void) +{ + int ret = uart_register_driver(&mlb_usio_uart_driver); + + if (ret) { + pr_err("%s: uart registration failed: %d\n", __func__, ret); + return ret; + } + ret = platform_driver_register(&mlb_usio_driver); + if (ret) { + uart_unregister_driver(&mlb_usio_uart_driver); + pr_err("%s: drv registration failed: %d\n", __func__, ret); + return ret; + } + + return 0; +} + +static void __exit mlb_usio_exit(void) +{ + platform_driver_unregister(&mlb_usio_driver); + uart_unregister_driver(&mlb_usio_uart_driver); +} + +module_init(mlb_usio_init); +module_exit(mlb_usio_exit); + +MODULE_AUTHOR("SOCIONEXT"); +MODULE_DESCRIPTION("MILBEAUT_USIO/UART Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c new file mode 100644 index 000000000..af1700445 --- /dev/null +++ b/drivers/tty/serial/mpc52xx_uart.c @@ -0,0 +1,1956 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for the PSC of the Freescale MPC52xx PSCs configured as UARTs. + * + * FIXME According to the usermanual the status bits in the status register + * are only updated when the peripherals access the FIFO and not when the + * CPU access them. So since we use this bits to know when we stop writing + * and reading, they may not be updated in-time and a race condition may + * exists. But I haven't be able to prove this and I don't care. But if + * any problem arises, it might worth checking. The TX/RX FIFO Stats + * registers should be used in addition. + * Update: Actually, they seem updated ... At least the bits we use. + * + * + * Maintainer : Sylvain Munaut + * + * Some of the code has been inspired/copied from the 2.4 code written + * by Dale Farnsworth . + * + * Copyright (C) 2008 Freescale Semiconductor Inc. + * John Rigby + * Added support for MPC5121 + * Copyright (C) 2006 Secret Lab Technologies Ltd. + * Grant Likely + * Copyright (C) 2004-2006 Sylvain Munaut + * Copyright (C) 2003 MontaVista, Software, Inc. + */ + +#undef DEBUG + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + + +/* We've been assigned a range on the "Low-density serial ports" major */ +#define SERIAL_PSC_MAJOR 204 +#define SERIAL_PSC_MINOR 148 + + +#define ISR_PASS_LIMIT 256 /* Max number of iteration in the interrupt */ + + +static struct uart_port mpc52xx_uart_ports[MPC52xx_PSC_MAXNUM]; + /* Rem: - We use the read_status_mask as a shadow of + * psc->mpc52xx_psc_imr + * - It's important that is array is all zero on start as we + * use it to know if it's initialized or not ! If it's not sure + * it's cleared, then a memset(...,0,...) should be added to + * the console_init + */ + +/* lookup table for matching device nodes to index numbers */ +static struct device_node *mpc52xx_uart_nodes[MPC52xx_PSC_MAXNUM]; + +static void mpc52xx_uart_of_enumerate(void); + + +#define PSC(port) ((struct mpc52xx_psc __iomem *)((port)->membase)) + + +/* Forward declaration of the interruption handling routine */ +static irqreturn_t mpc52xx_uart_int(int irq, void *dev_id); +static irqreturn_t mpc5xxx_uart_process_int(struct uart_port *port); + +/* ======================================================================== */ +/* PSC fifo operations for isolating differences between 52xx and 512x */ +/* ======================================================================== */ + +struct psc_ops { + void (*fifo_init)(struct uart_port *port); + int (*raw_rx_rdy)(struct uart_port *port); + int (*raw_tx_rdy)(struct uart_port *port); + int (*rx_rdy)(struct uart_port *port); + int (*tx_rdy)(struct uart_port *port); + int (*tx_empty)(struct uart_port *port); + void (*stop_rx)(struct uart_port *port); + void (*start_tx)(struct uart_port *port); + void (*stop_tx)(struct uart_port *port); + void (*rx_clr_irq)(struct uart_port *port); + void (*tx_clr_irq)(struct uart_port *port); + void (*write_char)(struct uart_port *port, unsigned char c); + unsigned char (*read_char)(struct uart_port *port); + void (*cw_disable_ints)(struct uart_port *port); + void (*cw_restore_ints)(struct uart_port *port); + unsigned int (*set_baudrate)(struct uart_port *port, + struct ktermios *new, + struct ktermios *old); + int (*clock_alloc)(struct uart_port *port); + void (*clock_relse)(struct uart_port *port); + int (*clock)(struct uart_port *port, int enable); + int (*fifoc_init)(void); + void (*fifoc_uninit)(void); + void (*get_irq)(struct uart_port *, struct device_node *); + irqreturn_t (*handle_irq)(struct uart_port *port); + u16 (*get_status)(struct uart_port *port); + u8 (*get_ipcr)(struct uart_port *port); + void (*command)(struct uart_port *port, u8 cmd); + void (*set_mode)(struct uart_port *port, u8 mr1, u8 mr2); + void (*set_rts)(struct uart_port *port, int state); + void (*enable_ms)(struct uart_port *port); + void (*set_sicr)(struct uart_port *port, u32 val); + void (*set_imr)(struct uart_port *port, u16 val); + u8 (*get_mr1)(struct uart_port *port); +}; + +/* setting the prescaler and divisor reg is common for all chips */ +static inline void mpc52xx_set_divisor(struct mpc52xx_psc __iomem *psc, + u16 prescaler, unsigned int divisor) +{ + /* select prescaler */ + out_be16(&psc->mpc52xx_psc_clock_select, prescaler); + out_8(&psc->ctur, divisor >> 8); + out_8(&psc->ctlr, divisor & 0xff); +} + +static u16 mpc52xx_psc_get_status(struct uart_port *port) +{ + return in_be16(&PSC(port)->mpc52xx_psc_status); +} + +static u8 mpc52xx_psc_get_ipcr(struct uart_port *port) +{ + return in_8(&PSC(port)->mpc52xx_psc_ipcr); +} + +static void mpc52xx_psc_command(struct uart_port *port, u8 cmd) +{ + out_8(&PSC(port)->command, cmd); +} + +static void mpc52xx_psc_set_mode(struct uart_port *port, u8 mr1, u8 mr2) +{ + out_8(&PSC(port)->command, MPC52xx_PSC_SEL_MODE_REG_1); + out_8(&PSC(port)->mode, mr1); + out_8(&PSC(port)->mode, mr2); +} + +static void mpc52xx_psc_set_rts(struct uart_port *port, int state) +{ + if (state) + out_8(&PSC(port)->op1, MPC52xx_PSC_OP_RTS); + else + out_8(&PSC(port)->op0, MPC52xx_PSC_OP_RTS); +} + +static void mpc52xx_psc_enable_ms(struct uart_port *port) +{ + struct mpc52xx_psc __iomem *psc = PSC(port); + + /* clear D_*-bits by reading them */ + in_8(&psc->mpc52xx_psc_ipcr); + /* enable CTS and DCD as IPC interrupts */ + out_8(&psc->mpc52xx_psc_acr, MPC52xx_PSC_IEC_CTS | MPC52xx_PSC_IEC_DCD); + + port->read_status_mask |= MPC52xx_PSC_IMR_IPC; + out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask); +} + +static void mpc52xx_psc_set_sicr(struct uart_port *port, u32 val) +{ + out_be32(&PSC(port)->sicr, val); +} + +static void mpc52xx_psc_set_imr(struct uart_port *port, u16 val) +{ + out_be16(&PSC(port)->mpc52xx_psc_imr, val); +} + +static u8 mpc52xx_psc_get_mr1(struct uart_port *port) +{ + out_8(&PSC(port)->command, MPC52xx_PSC_SEL_MODE_REG_1); + return in_8(&PSC(port)->mode); +} + +#ifdef CONFIG_PPC_MPC52xx +#define FIFO_52xx(port) ((struct mpc52xx_psc_fifo __iomem *)(PSC(port)+1)) +static void mpc52xx_psc_fifo_init(struct uart_port *port) +{ + struct mpc52xx_psc __iomem *psc = PSC(port); + struct mpc52xx_psc_fifo __iomem *fifo = FIFO_52xx(port); + + out_8(&fifo->rfcntl, 0x00); + out_be16(&fifo->rfalarm, 0x1ff); + out_8(&fifo->tfcntl, 0x07); + out_be16(&fifo->tfalarm, 0x80); + + port->read_status_mask |= MPC52xx_PSC_IMR_RXRDY | MPC52xx_PSC_IMR_TXRDY; + out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask); +} + +static int mpc52xx_psc_raw_rx_rdy(struct uart_port *port) +{ + return in_be16(&PSC(port)->mpc52xx_psc_status) + & MPC52xx_PSC_SR_RXRDY; +} + +static int mpc52xx_psc_raw_tx_rdy(struct uart_port *port) +{ + return in_be16(&PSC(port)->mpc52xx_psc_status) + & MPC52xx_PSC_SR_TXRDY; +} + + +static int mpc52xx_psc_rx_rdy(struct uart_port *port) +{ + return in_be16(&PSC(port)->mpc52xx_psc_isr) + & port->read_status_mask + & MPC52xx_PSC_IMR_RXRDY; +} + +static int mpc52xx_psc_tx_rdy(struct uart_port *port) +{ + return in_be16(&PSC(port)->mpc52xx_psc_isr) + & port->read_status_mask + & MPC52xx_PSC_IMR_TXRDY; +} + +static int mpc52xx_psc_tx_empty(struct uart_port *port) +{ + u16 sts = in_be16(&PSC(port)->mpc52xx_psc_status); + + return (sts & MPC52xx_PSC_SR_TXEMP) ? TIOCSER_TEMT : 0; +} + +static void mpc52xx_psc_start_tx(struct uart_port *port) +{ + port->read_status_mask |= MPC52xx_PSC_IMR_TXRDY; + out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask); +} + +static void mpc52xx_psc_stop_tx(struct uart_port *port) +{ + port->read_status_mask &= ~MPC52xx_PSC_IMR_TXRDY; + out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask); +} + +static void mpc52xx_psc_stop_rx(struct uart_port *port) +{ + port->read_status_mask &= ~MPC52xx_PSC_IMR_RXRDY; + out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask); +} + +static void mpc52xx_psc_rx_clr_irq(struct uart_port *port) +{ +} + +static void mpc52xx_psc_tx_clr_irq(struct uart_port *port) +{ +} + +static void mpc52xx_psc_write_char(struct uart_port *port, unsigned char c) +{ + out_8(&PSC(port)->mpc52xx_psc_buffer_8, c); +} + +static unsigned char mpc52xx_psc_read_char(struct uart_port *port) +{ + return in_8(&PSC(port)->mpc52xx_psc_buffer_8); +} + +static void mpc52xx_psc_cw_disable_ints(struct uart_port *port) +{ + out_be16(&PSC(port)->mpc52xx_psc_imr, 0); +} + +static void mpc52xx_psc_cw_restore_ints(struct uart_port *port) +{ + out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask); +} + +static unsigned int mpc5200_psc_set_baudrate(struct uart_port *port, + struct ktermios *new, + struct ktermios *old) +{ + unsigned int baud; + unsigned int divisor; + + /* The 5200 has a fixed /32 prescaler, uartclk contains the ipb freq */ + baud = uart_get_baud_rate(port, new, old, + port->uartclk / (32 * 0xffff) + 1, + port->uartclk / 32); + divisor = (port->uartclk + 16 * baud) / (32 * baud); + + /* enable the /32 prescaler and set the divisor */ + mpc52xx_set_divisor(PSC(port), 0xdd00, divisor); + return baud; +} + +static unsigned int mpc5200b_psc_set_baudrate(struct uart_port *port, + struct ktermios *new, + struct ktermios *old) +{ + unsigned int baud; + unsigned int divisor; + u16 prescaler; + + /* The 5200B has a selectable /4 or /32 prescaler, uartclk contains the + * ipb freq */ + baud = uart_get_baud_rate(port, new, old, + port->uartclk / (32 * 0xffff) + 1, + port->uartclk / 4); + divisor = (port->uartclk + 2 * baud) / (4 * baud); + + /* select the proper prescaler and set the divisor + * prefer high prescaler for more tolerance on low baudrates */ + if (divisor > 0xffff || baud <= 115200) { + divisor = (divisor + 4) / 8; + prescaler = 0xdd00; /* /32 */ + } else + prescaler = 0xff00; /* /4 */ + mpc52xx_set_divisor(PSC(port), prescaler, divisor); + return baud; +} + +static void mpc52xx_psc_get_irq(struct uart_port *port, struct device_node *np) +{ + port->irqflags = 0; + port->irq = irq_of_parse_and_map(np, 0); +} + +/* 52xx specific interrupt handler. The caller holds the port lock */ +static irqreturn_t mpc52xx_psc_handle_irq(struct uart_port *port) +{ + return mpc5xxx_uart_process_int(port); +} + +static const struct psc_ops mpc52xx_psc_ops = { + .fifo_init = mpc52xx_psc_fifo_init, + .raw_rx_rdy = mpc52xx_psc_raw_rx_rdy, + .raw_tx_rdy = mpc52xx_psc_raw_tx_rdy, + .rx_rdy = mpc52xx_psc_rx_rdy, + .tx_rdy = mpc52xx_psc_tx_rdy, + .tx_empty = mpc52xx_psc_tx_empty, + .stop_rx = mpc52xx_psc_stop_rx, + .start_tx = mpc52xx_psc_start_tx, + .stop_tx = mpc52xx_psc_stop_tx, + .rx_clr_irq = mpc52xx_psc_rx_clr_irq, + .tx_clr_irq = mpc52xx_psc_tx_clr_irq, + .write_char = mpc52xx_psc_write_char, + .read_char = mpc52xx_psc_read_char, + .cw_disable_ints = mpc52xx_psc_cw_disable_ints, + .cw_restore_ints = mpc52xx_psc_cw_restore_ints, + .set_baudrate = mpc5200_psc_set_baudrate, + .get_irq = mpc52xx_psc_get_irq, + .handle_irq = mpc52xx_psc_handle_irq, + .get_status = mpc52xx_psc_get_status, + .get_ipcr = mpc52xx_psc_get_ipcr, + .command = mpc52xx_psc_command, + .set_mode = mpc52xx_psc_set_mode, + .set_rts = mpc52xx_psc_set_rts, + .enable_ms = mpc52xx_psc_enable_ms, + .set_sicr = mpc52xx_psc_set_sicr, + .set_imr = mpc52xx_psc_set_imr, + .get_mr1 = mpc52xx_psc_get_mr1, +}; + +static const struct psc_ops mpc5200b_psc_ops = { + .fifo_init = mpc52xx_psc_fifo_init, + .raw_rx_rdy = mpc52xx_psc_raw_rx_rdy, + .raw_tx_rdy = mpc52xx_psc_raw_tx_rdy, + .rx_rdy = mpc52xx_psc_rx_rdy, + .tx_rdy = mpc52xx_psc_tx_rdy, + .tx_empty = mpc52xx_psc_tx_empty, + .stop_rx = mpc52xx_psc_stop_rx, + .start_tx = mpc52xx_psc_start_tx, + .stop_tx = mpc52xx_psc_stop_tx, + .rx_clr_irq = mpc52xx_psc_rx_clr_irq, + .tx_clr_irq = mpc52xx_psc_tx_clr_irq, + .write_char = mpc52xx_psc_write_char, + .read_char = mpc52xx_psc_read_char, + .cw_disable_ints = mpc52xx_psc_cw_disable_ints, + .cw_restore_ints = mpc52xx_psc_cw_restore_ints, + .set_baudrate = mpc5200b_psc_set_baudrate, + .get_irq = mpc52xx_psc_get_irq, + .handle_irq = mpc52xx_psc_handle_irq, + .get_status = mpc52xx_psc_get_status, + .get_ipcr = mpc52xx_psc_get_ipcr, + .command = mpc52xx_psc_command, + .set_mode = mpc52xx_psc_set_mode, + .set_rts = mpc52xx_psc_set_rts, + .enable_ms = mpc52xx_psc_enable_ms, + .set_sicr = mpc52xx_psc_set_sicr, + .set_imr = mpc52xx_psc_set_imr, + .get_mr1 = mpc52xx_psc_get_mr1, +}; + +#endif /* CONFIG_PPC_MPC52xx */ + +#ifdef CONFIG_PPC_MPC512x +#define FIFO_512x(port) ((struct mpc512x_psc_fifo __iomem *)(PSC(port)+1)) + +/* PSC FIFO Controller for mpc512x */ +struct psc_fifoc { + u32 fifoc_cmd; + u32 fifoc_int; + u32 fifoc_dma; + u32 fifoc_axe; + u32 fifoc_debug; +}; + +static struct psc_fifoc __iomem *psc_fifoc; +static unsigned int psc_fifoc_irq; +static struct clk *psc_fifoc_clk; + +static void mpc512x_psc_fifo_init(struct uart_port *port) +{ + /* /32 prescaler */ + out_be16(&PSC(port)->mpc52xx_psc_clock_select, 0xdd00); + + out_be32(&FIFO_512x(port)->txcmd, MPC512x_PSC_FIFO_RESET_SLICE); + out_be32(&FIFO_512x(port)->txcmd, MPC512x_PSC_FIFO_ENABLE_SLICE); + out_be32(&FIFO_512x(port)->txalarm, 1); + out_be32(&FIFO_512x(port)->tximr, 0); + + out_be32(&FIFO_512x(port)->rxcmd, MPC512x_PSC_FIFO_RESET_SLICE); + out_be32(&FIFO_512x(port)->rxcmd, MPC512x_PSC_FIFO_ENABLE_SLICE); + out_be32(&FIFO_512x(port)->rxalarm, 1); + out_be32(&FIFO_512x(port)->rximr, 0); + + out_be32(&FIFO_512x(port)->tximr, MPC512x_PSC_FIFO_ALARM); + out_be32(&FIFO_512x(port)->rximr, MPC512x_PSC_FIFO_ALARM); +} + +static int mpc512x_psc_raw_rx_rdy(struct uart_port *port) +{ + return !(in_be32(&FIFO_512x(port)->rxsr) & MPC512x_PSC_FIFO_EMPTY); +} + +static int mpc512x_psc_raw_tx_rdy(struct uart_port *port) +{ + return !(in_be32(&FIFO_512x(port)->txsr) & MPC512x_PSC_FIFO_FULL); +} + +static int mpc512x_psc_rx_rdy(struct uart_port *port) +{ + return in_be32(&FIFO_512x(port)->rxsr) + & in_be32(&FIFO_512x(port)->rximr) + & MPC512x_PSC_FIFO_ALARM; +} + +static int mpc512x_psc_tx_rdy(struct uart_port *port) +{ + return in_be32(&FIFO_512x(port)->txsr) + & in_be32(&FIFO_512x(port)->tximr) + & MPC512x_PSC_FIFO_ALARM; +} + +static int mpc512x_psc_tx_empty(struct uart_port *port) +{ + return in_be32(&FIFO_512x(port)->txsr) + & MPC512x_PSC_FIFO_EMPTY; +} + +static void mpc512x_psc_stop_rx(struct uart_port *port) +{ + unsigned long rx_fifo_imr; + + rx_fifo_imr = in_be32(&FIFO_512x(port)->rximr); + rx_fifo_imr &= ~MPC512x_PSC_FIFO_ALARM; + out_be32(&FIFO_512x(port)->rximr, rx_fifo_imr); +} + +static void mpc512x_psc_start_tx(struct uart_port *port) +{ + unsigned long tx_fifo_imr; + + tx_fifo_imr = in_be32(&FIFO_512x(port)->tximr); + tx_fifo_imr |= MPC512x_PSC_FIFO_ALARM; + out_be32(&FIFO_512x(port)->tximr, tx_fifo_imr); +} + +static void mpc512x_psc_stop_tx(struct uart_port *port) +{ + unsigned long tx_fifo_imr; + + tx_fifo_imr = in_be32(&FIFO_512x(port)->tximr); + tx_fifo_imr &= ~MPC512x_PSC_FIFO_ALARM; + out_be32(&FIFO_512x(port)->tximr, tx_fifo_imr); +} + +static void mpc512x_psc_rx_clr_irq(struct uart_port *port) +{ + out_be32(&FIFO_512x(port)->rxisr, in_be32(&FIFO_512x(port)->rxisr)); +} + +static void mpc512x_psc_tx_clr_irq(struct uart_port *port) +{ + out_be32(&FIFO_512x(port)->txisr, in_be32(&FIFO_512x(port)->txisr)); +} + +static void mpc512x_psc_write_char(struct uart_port *port, unsigned char c) +{ + out_8(&FIFO_512x(port)->txdata_8, c); +} + +static unsigned char mpc512x_psc_read_char(struct uart_port *port) +{ + return in_8(&FIFO_512x(port)->rxdata_8); +} + +static void mpc512x_psc_cw_disable_ints(struct uart_port *port) +{ + port->read_status_mask = + in_be32(&FIFO_512x(port)->tximr) << 16 | + in_be32(&FIFO_512x(port)->rximr); + out_be32(&FIFO_512x(port)->tximr, 0); + out_be32(&FIFO_512x(port)->rximr, 0); +} + +static void mpc512x_psc_cw_restore_ints(struct uart_port *port) +{ + out_be32(&FIFO_512x(port)->tximr, + (port->read_status_mask >> 16) & 0x7f); + out_be32(&FIFO_512x(port)->rximr, port->read_status_mask & 0x7f); +} + +static unsigned int mpc512x_psc_set_baudrate(struct uart_port *port, + struct ktermios *new, + struct ktermios *old) +{ + unsigned int baud; + unsigned int divisor; + + /* + * The "MPC5121e Microcontroller Reference Manual, Rev. 3" says on + * pg. 30-10 that the chip supports a /32 and a /10 prescaler. + * Furthermore, it states that "After reset, the prescaler by 10 + * for the UART mode is selected", but the reset register value is + * 0x0000 which means a /32 prescaler. This is wrong. + * + * In reality using /32 prescaler doesn't work, as it is not supported! + * Use /16 or /10 prescaler, see "MPC5121e Hardware Design Guide", + * Chapter 4.1 PSC in UART Mode. + * Calculate with a /16 prescaler here. + */ + + /* uartclk contains the ips freq */ + baud = uart_get_baud_rate(port, new, old, + port->uartclk / (16 * 0xffff) + 1, + port->uartclk / 16); + divisor = (port->uartclk + 8 * baud) / (16 * baud); + + /* enable the /16 prescaler and set the divisor */ + mpc52xx_set_divisor(PSC(port), 0xdd00, divisor); + return baud; +} + +/* Init PSC FIFO Controller */ +static int __init mpc512x_psc_fifoc_init(void) +{ + int err; + struct device_node *np; + struct clk *clk; + + /* default error code, potentially overwritten by clock calls */ + err = -ENODEV; + + np = of_find_compatible_node(NULL, NULL, + "fsl,mpc5121-psc-fifo"); + if (!np) { + pr_err("%s: Can't find FIFOC node\n", __func__); + goto out_err; + } + + clk = of_clk_get(np, 0); + if (IS_ERR(clk)) { + /* backwards compat with device trees that lack clock specs */ + clk = clk_get_sys(np->name, "ipg"); + } + if (IS_ERR(clk)) { + pr_err("%s: Can't lookup FIFO clock\n", __func__); + err = PTR_ERR(clk); + goto out_ofnode_put; + } + if (clk_prepare_enable(clk)) { + pr_err("%s: Can't enable FIFO clock\n", __func__); + clk_put(clk); + goto out_ofnode_put; + } + psc_fifoc_clk = clk; + + psc_fifoc = of_iomap(np, 0); + if (!psc_fifoc) { + pr_err("%s: Can't map FIFOC\n", __func__); + goto out_clk_disable; + } + + psc_fifoc_irq = irq_of_parse_and_map(np, 0); + if (psc_fifoc_irq == 0) { + pr_err("%s: Can't get FIFOC irq\n", __func__); + goto out_unmap; + } + + of_node_put(np); + return 0; + +out_unmap: + iounmap(psc_fifoc); +out_clk_disable: + clk_disable_unprepare(psc_fifoc_clk); + clk_put(psc_fifoc_clk); +out_ofnode_put: + of_node_put(np); +out_err: + return err; +} + +static void __exit mpc512x_psc_fifoc_uninit(void) +{ + iounmap(psc_fifoc); + + /* disable the clock, errors are not fatal */ + if (psc_fifoc_clk) { + clk_disable_unprepare(psc_fifoc_clk); + clk_put(psc_fifoc_clk); + psc_fifoc_clk = NULL; + } +} + +/* 512x specific interrupt handler. The caller holds the port lock */ +static irqreturn_t mpc512x_psc_handle_irq(struct uart_port *port) +{ + unsigned long fifoc_int; + int psc_num; + + /* Read pending PSC FIFOC interrupts */ + fifoc_int = in_be32(&psc_fifoc->fifoc_int); + + /* Check if it is an interrupt for this port */ + psc_num = (port->mapbase & 0xf00) >> 8; + if (test_bit(psc_num, &fifoc_int) || + test_bit(psc_num + 16, &fifoc_int)) + return mpc5xxx_uart_process_int(port); + + return IRQ_NONE; +} + +static struct clk *psc_mclk_clk[MPC52xx_PSC_MAXNUM]; +static struct clk *psc_ipg_clk[MPC52xx_PSC_MAXNUM]; + +/* called from within the .request_port() callback (allocation) */ +static int mpc512x_psc_alloc_clock(struct uart_port *port) +{ + int psc_num; + struct clk *clk; + int err; + + psc_num = (port->mapbase & 0xf00) >> 8; + + clk = devm_clk_get(port->dev, "mclk"); + if (IS_ERR(clk)) { + dev_err(port->dev, "Failed to get MCLK!\n"); + err = PTR_ERR(clk); + goto out_err; + } + err = clk_prepare_enable(clk); + if (err) { + dev_err(port->dev, "Failed to enable MCLK!\n"); + goto out_err; + } + psc_mclk_clk[psc_num] = clk; + + clk = devm_clk_get(port->dev, "ipg"); + if (IS_ERR(clk)) { + dev_err(port->dev, "Failed to get IPG clock!\n"); + err = PTR_ERR(clk); + goto out_err; + } + err = clk_prepare_enable(clk); + if (err) { + dev_err(port->dev, "Failed to enable IPG clock!\n"); + goto out_err; + } + psc_ipg_clk[psc_num] = clk; + + return 0; + +out_err: + if (psc_mclk_clk[psc_num]) { + clk_disable_unprepare(psc_mclk_clk[psc_num]); + psc_mclk_clk[psc_num] = NULL; + } + if (psc_ipg_clk[psc_num]) { + clk_disable_unprepare(psc_ipg_clk[psc_num]); + psc_ipg_clk[psc_num] = NULL; + } + return err; +} + +/* called from within the .release_port() callback (release) */ +static void mpc512x_psc_relse_clock(struct uart_port *port) +{ + int psc_num; + struct clk *clk; + + psc_num = (port->mapbase & 0xf00) >> 8; + clk = psc_mclk_clk[psc_num]; + if (clk) { + clk_disable_unprepare(clk); + psc_mclk_clk[psc_num] = NULL; + } + if (psc_ipg_clk[psc_num]) { + clk_disable_unprepare(psc_ipg_clk[psc_num]); + psc_ipg_clk[psc_num] = NULL; + } +} + +/* implementation of the .clock() callback (enable/disable) */ +static int mpc512x_psc_endis_clock(struct uart_port *port, int enable) +{ + int psc_num; + struct clk *psc_clk; + int ret; + + if (uart_console(port)) + return 0; + + psc_num = (port->mapbase & 0xf00) >> 8; + psc_clk = psc_mclk_clk[psc_num]; + if (!psc_clk) { + dev_err(port->dev, "Failed to get PSC clock entry!\n"); + return -ENODEV; + } + + dev_dbg(port->dev, "mclk %sable\n", enable ? "en" : "dis"); + if (enable) { + ret = clk_enable(psc_clk); + if (ret) + dev_err(port->dev, "Failed to enable MCLK!\n"); + return ret; + } else { + clk_disable(psc_clk); + return 0; + } +} + +static void mpc512x_psc_get_irq(struct uart_port *port, struct device_node *np) +{ + port->irqflags = IRQF_SHARED; + port->irq = psc_fifoc_irq; +} +#endif + +#ifdef CONFIG_PPC_MPC512x + +#define PSC_5125(port) ((struct mpc5125_psc __iomem *)((port)->membase)) +#define FIFO_5125(port) ((struct mpc512x_psc_fifo __iomem *)(PSC_5125(port)+1)) + +static void mpc5125_psc_fifo_init(struct uart_port *port) +{ + /* /32 prescaler */ + out_8(&PSC_5125(port)->mpc52xx_psc_clock_select, 0xdd); + + out_be32(&FIFO_5125(port)->txcmd, MPC512x_PSC_FIFO_RESET_SLICE); + out_be32(&FIFO_5125(port)->txcmd, MPC512x_PSC_FIFO_ENABLE_SLICE); + out_be32(&FIFO_5125(port)->txalarm, 1); + out_be32(&FIFO_5125(port)->tximr, 0); + + out_be32(&FIFO_5125(port)->rxcmd, MPC512x_PSC_FIFO_RESET_SLICE); + out_be32(&FIFO_5125(port)->rxcmd, MPC512x_PSC_FIFO_ENABLE_SLICE); + out_be32(&FIFO_5125(port)->rxalarm, 1); + out_be32(&FIFO_5125(port)->rximr, 0); + + out_be32(&FIFO_5125(port)->tximr, MPC512x_PSC_FIFO_ALARM); + out_be32(&FIFO_5125(port)->rximr, MPC512x_PSC_FIFO_ALARM); +} + +static int mpc5125_psc_raw_rx_rdy(struct uart_port *port) +{ + return !(in_be32(&FIFO_5125(port)->rxsr) & MPC512x_PSC_FIFO_EMPTY); +} + +static int mpc5125_psc_raw_tx_rdy(struct uart_port *port) +{ + return !(in_be32(&FIFO_5125(port)->txsr) & MPC512x_PSC_FIFO_FULL); +} + +static int mpc5125_psc_rx_rdy(struct uart_port *port) +{ + return in_be32(&FIFO_5125(port)->rxsr) & + in_be32(&FIFO_5125(port)->rximr) & MPC512x_PSC_FIFO_ALARM; +} + +static int mpc5125_psc_tx_rdy(struct uart_port *port) +{ + return in_be32(&FIFO_5125(port)->txsr) & + in_be32(&FIFO_5125(port)->tximr) & MPC512x_PSC_FIFO_ALARM; +} + +static int mpc5125_psc_tx_empty(struct uart_port *port) +{ + return in_be32(&FIFO_5125(port)->txsr) & MPC512x_PSC_FIFO_EMPTY; +} + +static void mpc5125_psc_stop_rx(struct uart_port *port) +{ + unsigned long rx_fifo_imr; + + rx_fifo_imr = in_be32(&FIFO_5125(port)->rximr); + rx_fifo_imr &= ~MPC512x_PSC_FIFO_ALARM; + out_be32(&FIFO_5125(port)->rximr, rx_fifo_imr); +} + +static void mpc5125_psc_start_tx(struct uart_port *port) +{ + unsigned long tx_fifo_imr; + + tx_fifo_imr = in_be32(&FIFO_5125(port)->tximr); + tx_fifo_imr |= MPC512x_PSC_FIFO_ALARM; + out_be32(&FIFO_5125(port)->tximr, tx_fifo_imr); +} + +static void mpc5125_psc_stop_tx(struct uart_port *port) +{ + unsigned long tx_fifo_imr; + + tx_fifo_imr = in_be32(&FIFO_5125(port)->tximr); + tx_fifo_imr &= ~MPC512x_PSC_FIFO_ALARM; + out_be32(&FIFO_5125(port)->tximr, tx_fifo_imr); +} + +static void mpc5125_psc_rx_clr_irq(struct uart_port *port) +{ + out_be32(&FIFO_5125(port)->rxisr, in_be32(&FIFO_5125(port)->rxisr)); +} + +static void mpc5125_psc_tx_clr_irq(struct uart_port *port) +{ + out_be32(&FIFO_5125(port)->txisr, in_be32(&FIFO_5125(port)->txisr)); +} + +static void mpc5125_psc_write_char(struct uart_port *port, unsigned char c) +{ + out_8(&FIFO_5125(port)->txdata_8, c); +} + +static unsigned char mpc5125_psc_read_char(struct uart_port *port) +{ + return in_8(&FIFO_5125(port)->rxdata_8); +} + +static void mpc5125_psc_cw_disable_ints(struct uart_port *port) +{ + port->read_status_mask = + in_be32(&FIFO_5125(port)->tximr) << 16 | + in_be32(&FIFO_5125(port)->rximr); + out_be32(&FIFO_5125(port)->tximr, 0); + out_be32(&FIFO_5125(port)->rximr, 0); +} + +static void mpc5125_psc_cw_restore_ints(struct uart_port *port) +{ + out_be32(&FIFO_5125(port)->tximr, + (port->read_status_mask >> 16) & 0x7f); + out_be32(&FIFO_5125(port)->rximr, port->read_status_mask & 0x7f); +} + +static inline void mpc5125_set_divisor(struct mpc5125_psc __iomem *psc, + u8 prescaler, unsigned int divisor) +{ + /* select prescaler */ + out_8(&psc->mpc52xx_psc_clock_select, prescaler); + out_8(&psc->ctur, divisor >> 8); + out_8(&psc->ctlr, divisor & 0xff); +} + +static unsigned int mpc5125_psc_set_baudrate(struct uart_port *port, + struct ktermios *new, + struct ktermios *old) +{ + unsigned int baud; + unsigned int divisor; + + /* + * Calculate with a /16 prescaler here. + */ + + /* uartclk contains the ips freq */ + baud = uart_get_baud_rate(port, new, old, + port->uartclk / (16 * 0xffff) + 1, + port->uartclk / 16); + divisor = (port->uartclk + 8 * baud) / (16 * baud); + + /* enable the /16 prescaler and set the divisor */ + mpc5125_set_divisor(PSC_5125(port), 0xdd, divisor); + return baud; +} + +/* + * MPC5125 have compatible PSC FIFO Controller. + * Special init not needed. + */ +static u16 mpc5125_psc_get_status(struct uart_port *port) +{ + return in_be16(&PSC_5125(port)->mpc52xx_psc_status); +} + +static u8 mpc5125_psc_get_ipcr(struct uart_port *port) +{ + return in_8(&PSC_5125(port)->mpc52xx_psc_ipcr); +} + +static void mpc5125_psc_command(struct uart_port *port, u8 cmd) +{ + out_8(&PSC_5125(port)->command, cmd); +} + +static void mpc5125_psc_set_mode(struct uart_port *port, u8 mr1, u8 mr2) +{ + out_8(&PSC_5125(port)->mr1, mr1); + out_8(&PSC_5125(port)->mr2, mr2); +} + +static void mpc5125_psc_set_rts(struct uart_port *port, int state) +{ + if (state & TIOCM_RTS) + out_8(&PSC_5125(port)->op1, MPC52xx_PSC_OP_RTS); + else + out_8(&PSC_5125(port)->op0, MPC52xx_PSC_OP_RTS); +} + +static void mpc5125_psc_enable_ms(struct uart_port *port) +{ + struct mpc5125_psc __iomem *psc = PSC_5125(port); + + /* clear D_*-bits by reading them */ + in_8(&psc->mpc52xx_psc_ipcr); + /* enable CTS and DCD as IPC interrupts */ + out_8(&psc->mpc52xx_psc_acr, MPC52xx_PSC_IEC_CTS | MPC52xx_PSC_IEC_DCD); + + port->read_status_mask |= MPC52xx_PSC_IMR_IPC; + out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask); +} + +static void mpc5125_psc_set_sicr(struct uart_port *port, u32 val) +{ + out_be32(&PSC_5125(port)->sicr, val); +} + +static void mpc5125_psc_set_imr(struct uart_port *port, u16 val) +{ + out_be16(&PSC_5125(port)->mpc52xx_psc_imr, val); +} + +static u8 mpc5125_psc_get_mr1(struct uart_port *port) +{ + return in_8(&PSC_5125(port)->mr1); +} + +static const struct psc_ops mpc5125_psc_ops = { + .fifo_init = mpc5125_psc_fifo_init, + .raw_rx_rdy = mpc5125_psc_raw_rx_rdy, + .raw_tx_rdy = mpc5125_psc_raw_tx_rdy, + .rx_rdy = mpc5125_psc_rx_rdy, + .tx_rdy = mpc5125_psc_tx_rdy, + .tx_empty = mpc5125_psc_tx_empty, + .stop_rx = mpc5125_psc_stop_rx, + .start_tx = mpc5125_psc_start_tx, + .stop_tx = mpc5125_psc_stop_tx, + .rx_clr_irq = mpc5125_psc_rx_clr_irq, + .tx_clr_irq = mpc5125_psc_tx_clr_irq, + .write_char = mpc5125_psc_write_char, + .read_char = mpc5125_psc_read_char, + .cw_disable_ints = mpc5125_psc_cw_disable_ints, + .cw_restore_ints = mpc5125_psc_cw_restore_ints, + .set_baudrate = mpc5125_psc_set_baudrate, + .clock_alloc = mpc512x_psc_alloc_clock, + .clock_relse = mpc512x_psc_relse_clock, + .clock = mpc512x_psc_endis_clock, + .fifoc_init = mpc512x_psc_fifoc_init, + .fifoc_uninit = mpc512x_psc_fifoc_uninit, + .get_irq = mpc512x_psc_get_irq, + .handle_irq = mpc512x_psc_handle_irq, + .get_status = mpc5125_psc_get_status, + .get_ipcr = mpc5125_psc_get_ipcr, + .command = mpc5125_psc_command, + .set_mode = mpc5125_psc_set_mode, + .set_rts = mpc5125_psc_set_rts, + .enable_ms = mpc5125_psc_enable_ms, + .set_sicr = mpc5125_psc_set_sicr, + .set_imr = mpc5125_psc_set_imr, + .get_mr1 = mpc5125_psc_get_mr1, +}; + +static const struct psc_ops mpc512x_psc_ops = { + .fifo_init = mpc512x_psc_fifo_init, + .raw_rx_rdy = mpc512x_psc_raw_rx_rdy, + .raw_tx_rdy = mpc512x_psc_raw_tx_rdy, + .rx_rdy = mpc512x_psc_rx_rdy, + .tx_rdy = mpc512x_psc_tx_rdy, + .tx_empty = mpc512x_psc_tx_empty, + .stop_rx = mpc512x_psc_stop_rx, + .start_tx = mpc512x_psc_start_tx, + .stop_tx = mpc512x_psc_stop_tx, + .rx_clr_irq = mpc512x_psc_rx_clr_irq, + .tx_clr_irq = mpc512x_psc_tx_clr_irq, + .write_char = mpc512x_psc_write_char, + .read_char = mpc512x_psc_read_char, + .cw_disable_ints = mpc512x_psc_cw_disable_ints, + .cw_restore_ints = mpc512x_psc_cw_restore_ints, + .set_baudrate = mpc512x_psc_set_baudrate, + .clock_alloc = mpc512x_psc_alloc_clock, + .clock_relse = mpc512x_psc_relse_clock, + .clock = mpc512x_psc_endis_clock, + .fifoc_init = mpc512x_psc_fifoc_init, + .fifoc_uninit = mpc512x_psc_fifoc_uninit, + .get_irq = mpc512x_psc_get_irq, + .handle_irq = mpc512x_psc_handle_irq, + .get_status = mpc52xx_psc_get_status, + .get_ipcr = mpc52xx_psc_get_ipcr, + .command = mpc52xx_psc_command, + .set_mode = mpc52xx_psc_set_mode, + .set_rts = mpc52xx_psc_set_rts, + .enable_ms = mpc52xx_psc_enable_ms, + .set_sicr = mpc52xx_psc_set_sicr, + .set_imr = mpc52xx_psc_set_imr, + .get_mr1 = mpc52xx_psc_get_mr1, +}; +#endif /* CONFIG_PPC_MPC512x */ + + +static const struct psc_ops *psc_ops; + +/* ======================================================================== */ +/* UART operations */ +/* ======================================================================== */ + +static unsigned int +mpc52xx_uart_tx_empty(struct uart_port *port) +{ + return psc_ops->tx_empty(port) ? TIOCSER_TEMT : 0; +} + +static void +mpc52xx_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + psc_ops->set_rts(port, mctrl & TIOCM_RTS); +} + +static unsigned int +mpc52xx_uart_get_mctrl(struct uart_port *port) +{ + unsigned int ret = TIOCM_DSR; + u8 status = psc_ops->get_ipcr(port); + + if (!(status & MPC52xx_PSC_CTS)) + ret |= TIOCM_CTS; + if (!(status & MPC52xx_PSC_DCD)) + ret |= TIOCM_CAR; + + return ret; +} + +static void +mpc52xx_uart_stop_tx(struct uart_port *port) +{ + /* port->lock taken by caller */ + psc_ops->stop_tx(port); +} + +static void +mpc52xx_uart_start_tx(struct uart_port *port) +{ + /* port->lock taken by caller */ + psc_ops->start_tx(port); +} + +static void +mpc52xx_uart_stop_rx(struct uart_port *port) +{ + /* port->lock taken by caller */ + psc_ops->stop_rx(port); +} + +static void +mpc52xx_uart_enable_ms(struct uart_port *port) +{ + psc_ops->enable_ms(port); +} + +static void +mpc52xx_uart_break_ctl(struct uart_port *port, int ctl) +{ + unsigned long flags; + spin_lock_irqsave(&port->lock, flags); + + if (ctl == -1) + psc_ops->command(port, MPC52xx_PSC_START_BRK); + else + psc_ops->command(port, MPC52xx_PSC_STOP_BRK); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static int +mpc52xx_uart_startup(struct uart_port *port) +{ + int ret; + + if (psc_ops->clock) { + ret = psc_ops->clock(port, 1); + if (ret) + return ret; + } + + /* Request IRQ */ + ret = request_irq(port->irq, mpc52xx_uart_int, + port->irqflags, "mpc52xx_psc_uart", port); + if (ret) + return ret; + + /* Reset/activate the port, clear and enable interrupts */ + psc_ops->command(port, MPC52xx_PSC_RST_RX); + psc_ops->command(port, MPC52xx_PSC_RST_TX); + + /* + * According to Freescale's support the RST_TX command can produce a + * spike on the TX pin. So they recommend to delay "for one character". + * One millisecond should be enough for everyone. + */ + msleep(1); + + psc_ops->set_sicr(port, 0); /* UART mode DCD ignored */ + + psc_ops->fifo_init(port); + + psc_ops->command(port, MPC52xx_PSC_TX_ENABLE); + psc_ops->command(port, MPC52xx_PSC_RX_ENABLE); + + return 0; +} + +static void +mpc52xx_uart_shutdown(struct uart_port *port) +{ + /* Shut down the port. Leave TX active if on a console port */ + psc_ops->command(port, MPC52xx_PSC_RST_RX); + if (!uart_console(port)) + psc_ops->command(port, MPC52xx_PSC_RST_TX); + + port->read_status_mask = 0; + psc_ops->set_imr(port, port->read_status_mask); + + if (psc_ops->clock) + psc_ops->clock(port, 0); + + /* Disable interrupt */ + psc_ops->cw_disable_ints(port); + + /* Release interrupt */ + free_irq(port->irq, port); +} + +static void +mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new, + struct ktermios *old) +{ + unsigned long flags; + unsigned char mr1, mr2; + unsigned int j; + unsigned int baud; + + /* Prepare what we're gonna write */ + mr1 = 0; + + switch (new->c_cflag & CSIZE) { + case CS5: mr1 |= MPC52xx_PSC_MODE_5_BITS; + break; + case CS6: mr1 |= MPC52xx_PSC_MODE_6_BITS; + break; + case CS7: mr1 |= MPC52xx_PSC_MODE_7_BITS; + break; + case CS8: + default: mr1 |= MPC52xx_PSC_MODE_8_BITS; + } + + if (new->c_cflag & PARENB) { + if (new->c_cflag & CMSPAR) + mr1 |= MPC52xx_PSC_MODE_PARFORCE; + + /* With CMSPAR, PARODD also means high parity (same as termios) */ + mr1 |= (new->c_cflag & PARODD) ? + MPC52xx_PSC_MODE_PARODD : MPC52xx_PSC_MODE_PAREVEN; + } else { + mr1 |= MPC52xx_PSC_MODE_PARNONE; + } + + mr2 = 0; + + if (new->c_cflag & CSTOPB) + mr2 |= MPC52xx_PSC_MODE_TWO_STOP; + else + mr2 |= ((new->c_cflag & CSIZE) == CS5) ? + MPC52xx_PSC_MODE_ONE_STOP_5_BITS : + MPC52xx_PSC_MODE_ONE_STOP; + + if (new->c_cflag & CRTSCTS) { + mr1 |= MPC52xx_PSC_MODE_RXRTS; + mr2 |= MPC52xx_PSC_MODE_TXCTS; + } + + /* Get the lock */ + spin_lock_irqsave(&port->lock, flags); + + /* Do our best to flush TX & RX, so we don't lose anything */ + /* But we don't wait indefinitely ! */ + j = 5000000; /* Maximum wait */ + /* FIXME Can't receive chars since set_termios might be called at early + * boot for the console, all stuff is not yet ready to receive at that + * time and that just makes the kernel oops */ + /* while (j-- && mpc52xx_uart_int_rx_chars(port)); */ + while (!mpc52xx_uart_tx_empty(port) && --j) + udelay(1); + + if (!j) + printk(KERN_ERR "mpc52xx_uart.c: " + "Unable to flush RX & TX fifos in-time in set_termios." + "Some chars may have been lost.\n"); + + /* Reset the TX & RX */ + psc_ops->command(port, MPC52xx_PSC_RST_RX); + psc_ops->command(port, MPC52xx_PSC_RST_TX); + + /* Send new mode settings */ + psc_ops->set_mode(port, mr1, mr2); + baud = psc_ops->set_baudrate(port, new, old); + + /* Update the per-port timeout */ + uart_update_timeout(port, new->c_cflag, baud); + + if (UART_ENABLE_MS(port, new->c_cflag)) + mpc52xx_uart_enable_ms(port); + + /* Reenable TX & RX */ + psc_ops->command(port, MPC52xx_PSC_TX_ENABLE); + psc_ops->command(port, MPC52xx_PSC_RX_ENABLE); + + /* We're all set, release the lock */ + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char * +mpc52xx_uart_type(struct uart_port *port) +{ + /* + * We keep using PORT_MPC52xx for historic reasons although it applies + * for MPC512x, too, but print "MPC5xxx" to not irritate users + */ + return port->type == PORT_MPC52xx ? "MPC5xxx PSC" : NULL; +} + +static void +mpc52xx_uart_release_port(struct uart_port *port) +{ + if (psc_ops->clock_relse) + psc_ops->clock_relse(port); + + /* remapped by us ? */ + if (port->flags & UPF_IOREMAP) { + iounmap(port->membase); + port->membase = NULL; + } + + release_mem_region(port->mapbase, sizeof(struct mpc52xx_psc)); +} + +static int +mpc52xx_uart_request_port(struct uart_port *port) +{ + int err; + + if (port->flags & UPF_IOREMAP) /* Need to remap ? */ + port->membase = ioremap(port->mapbase, + sizeof(struct mpc52xx_psc)); + + if (!port->membase) + return -EINVAL; + + err = request_mem_region(port->mapbase, sizeof(struct mpc52xx_psc), + "mpc52xx_psc_uart") != NULL ? 0 : -EBUSY; + + if (err) + goto out_membase; + + if (psc_ops->clock_alloc) { + err = psc_ops->clock_alloc(port); + if (err) + goto out_mapregion; + } + + return 0; + +out_mapregion: + release_mem_region(port->mapbase, sizeof(struct mpc52xx_psc)); +out_membase: + if (port->flags & UPF_IOREMAP) { + iounmap(port->membase); + port->membase = NULL; + } + return err; +} + +static void +mpc52xx_uart_config_port(struct uart_port *port, int flags) +{ + if ((flags & UART_CONFIG_TYPE) + && (mpc52xx_uart_request_port(port) == 0)) + port->type = PORT_MPC52xx; +} + +static int +mpc52xx_uart_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + if (ser->type != PORT_UNKNOWN && ser->type != PORT_MPC52xx) + return -EINVAL; + + if ((ser->irq != port->irq) || + (ser->io_type != UPIO_MEM) || + (ser->baud_base != port->uartclk) || + (ser->iomem_base != (void *)port->mapbase) || + (ser->hub6 != 0)) + return -EINVAL; + + return 0; +} + + +static const struct uart_ops mpc52xx_uart_ops = { + .tx_empty = mpc52xx_uart_tx_empty, + .set_mctrl = mpc52xx_uart_set_mctrl, + .get_mctrl = mpc52xx_uart_get_mctrl, + .stop_tx = mpc52xx_uart_stop_tx, + .start_tx = mpc52xx_uart_start_tx, + .stop_rx = mpc52xx_uart_stop_rx, + .enable_ms = mpc52xx_uart_enable_ms, + .break_ctl = mpc52xx_uart_break_ctl, + .startup = mpc52xx_uart_startup, + .shutdown = mpc52xx_uart_shutdown, + .set_termios = mpc52xx_uart_set_termios, +/* .pm = mpc52xx_uart_pm, Not supported yet */ + .type = mpc52xx_uart_type, + .release_port = mpc52xx_uart_release_port, + .request_port = mpc52xx_uart_request_port, + .config_port = mpc52xx_uart_config_port, + .verify_port = mpc52xx_uart_verify_port +}; + + +/* ======================================================================== */ +/* Interrupt handling */ +/* ======================================================================== */ + +static inline int +mpc52xx_uart_int_rx_chars(struct uart_port *port) +{ + struct tty_port *tport = &port->state->port; + unsigned char ch, flag; + unsigned short status; + + /* While we can read, do so ! */ + while (psc_ops->raw_rx_rdy(port)) { + /* Get the char */ + ch = psc_ops->read_char(port); + + /* Handle sysreq char */ + if (uart_handle_sysrq_char(port, ch)) + continue; + + /* Store it */ + + flag = TTY_NORMAL; + port->icount.rx++; + + status = psc_ops->get_status(port); + + if (status & (MPC52xx_PSC_SR_PE | + MPC52xx_PSC_SR_FE | + MPC52xx_PSC_SR_RB)) { + + if (status & MPC52xx_PSC_SR_RB) { + flag = TTY_BREAK; + uart_handle_break(port); + port->icount.brk++; + } else if (status & MPC52xx_PSC_SR_PE) { + flag = TTY_PARITY; + port->icount.parity++; + } + else if (status & MPC52xx_PSC_SR_FE) { + flag = TTY_FRAME; + port->icount.frame++; + } + + /* Clear error condition */ + psc_ops->command(port, MPC52xx_PSC_RST_ERR_STAT); + + } + tty_insert_flip_char(tport, ch, flag); + if (status & MPC52xx_PSC_SR_OE) { + /* + * Overrun is special, since it's + * reported immediately, and doesn't + * affect the current character + */ + tty_insert_flip_char(tport, 0, TTY_OVERRUN); + port->icount.overrun++; + } + } + + spin_unlock(&port->lock); + tty_flip_buffer_push(tport); + spin_lock(&port->lock); + + return psc_ops->raw_rx_rdy(port); +} + +static inline int +mpc52xx_uart_int_tx_chars(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + + /* Process out of band chars */ + if (port->x_char) { + psc_ops->write_char(port, port->x_char); + port->icount.tx++; + port->x_char = 0; + return 1; + } + + /* Nothing to do ? */ + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + mpc52xx_uart_stop_tx(port); + return 0; + } + + /* Send chars */ + while (psc_ops->raw_tx_rdy(port)) { + psc_ops->write_char(port, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + } + + /* Wake up */ + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + /* Maybe we're done after all */ + if (uart_circ_empty(xmit)) { + mpc52xx_uart_stop_tx(port); + return 0; + } + + return 1; +} + +static irqreturn_t +mpc5xxx_uart_process_int(struct uart_port *port) +{ + unsigned long pass = ISR_PASS_LIMIT; + unsigned int keepgoing; + u8 status; + + /* While we have stuff to do, we continue */ + do { + /* If we don't find anything to do, we stop */ + keepgoing = 0; + + psc_ops->rx_clr_irq(port); + if (psc_ops->rx_rdy(port)) + keepgoing |= mpc52xx_uart_int_rx_chars(port); + + psc_ops->tx_clr_irq(port); + if (psc_ops->tx_rdy(port)) + keepgoing |= mpc52xx_uart_int_tx_chars(port); + + status = psc_ops->get_ipcr(port); + if (status & MPC52xx_PSC_D_DCD) + uart_handle_dcd_change(port, !(status & MPC52xx_PSC_DCD)); + + if (status & MPC52xx_PSC_D_CTS) + uart_handle_cts_change(port, !(status & MPC52xx_PSC_CTS)); + + /* Limit number of iteration */ + if (!(--pass)) + keepgoing = 0; + + } while (keepgoing); + + return IRQ_HANDLED; +} + +static irqreturn_t +mpc52xx_uart_int(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + irqreturn_t ret; + + spin_lock(&port->lock); + + ret = psc_ops->handle_irq(port); + + spin_unlock(&port->lock); + + return ret; +} + +/* ======================================================================== */ +/* Console ( if applicable ) */ +/* ======================================================================== */ + +#ifdef CONFIG_SERIAL_MPC52xx_CONSOLE + +static void __init +mpc52xx_console_get_options(struct uart_port *port, + int *baud, int *parity, int *bits, int *flow) +{ + unsigned char mr1; + + pr_debug("mpc52xx_console_get_options(port=%p)\n", port); + + /* Read the mode registers */ + mr1 = psc_ops->get_mr1(port); + + /* CT{U,L}R are write-only ! */ + *baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD; + + /* Parse them */ + switch (mr1 & MPC52xx_PSC_MODE_BITS_MASK) { + case MPC52xx_PSC_MODE_5_BITS: + *bits = 5; + break; + case MPC52xx_PSC_MODE_6_BITS: + *bits = 6; + break; + case MPC52xx_PSC_MODE_7_BITS: + *bits = 7; + break; + case MPC52xx_PSC_MODE_8_BITS: + default: + *bits = 8; + } + + if (mr1 & MPC52xx_PSC_MODE_PARNONE) + *parity = 'n'; + else + *parity = mr1 & MPC52xx_PSC_MODE_PARODD ? 'o' : 'e'; +} + +static void +mpc52xx_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_port *port = &mpc52xx_uart_ports[co->index]; + unsigned int i, j; + + /* Disable interrupts */ + psc_ops->cw_disable_ints(port); + + /* Wait the TX buffer to be empty */ + j = 5000000; /* Maximum wait */ + while (!mpc52xx_uart_tx_empty(port) && --j) + udelay(1); + + /* Write all the chars */ + for (i = 0; i < count; i++, s++) { + /* Line return handling */ + if (*s == '\n') + psc_ops->write_char(port, '\r'); + + /* Send the char */ + psc_ops->write_char(port, *s); + + /* Wait the TX buffer to be empty */ + j = 20000; /* Maximum wait */ + while (!mpc52xx_uart_tx_empty(port) && --j) + udelay(1); + } + + /* Restore interrupt state */ + psc_ops->cw_restore_ints(port); +} + + +static int __init +mpc52xx_console_setup(struct console *co, char *options) +{ + struct uart_port *port = &mpc52xx_uart_ports[co->index]; + struct device_node *np = mpc52xx_uart_nodes[co->index]; + unsigned int uartclk; + struct resource res; + int ret; + + int baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + pr_debug("mpc52xx_console_setup co=%p, co->index=%i, options=%s\n", + co, co->index, options); + + if ((co->index < 0) || (co->index >= MPC52xx_PSC_MAXNUM)) { + pr_debug("PSC%x out of range\n", co->index); + return -EINVAL; + } + + if (!np) { + pr_debug("PSC%x not found in device tree\n", co->index); + return -EINVAL; + } + + pr_debug("Console on ttyPSC%x is %pOF\n", + co->index, mpc52xx_uart_nodes[co->index]); + + /* Fetch register locations */ + ret = of_address_to_resource(np, 0, &res); + if (ret) { + pr_debug("Could not get resources for PSC%x\n", co->index); + return ret; + } + + uartclk = mpc5xxx_get_bus_frequency(np); + if (uartclk == 0) { + pr_debug("Could not find uart clock frequency!\n"); + return -EINVAL; + } + + /* Basic port init. Needed since we use some uart_??? func before + * real init for early access */ + spin_lock_init(&port->lock); + port->uartclk = uartclk; + port->ops = &mpc52xx_uart_ops; + port->mapbase = res.start; + port->membase = ioremap(res.start, sizeof(struct mpc52xx_psc)); + port->irq = irq_of_parse_and_map(np, 0); + + if (port->membase == NULL) + return -EINVAL; + + pr_debug("mpc52xx-psc uart at %p, mapped to %p, irq=%x, freq=%i\n", + (void *)port->mapbase, port->membase, + port->irq, port->uartclk); + + /* Setup the port parameters accoding to options */ + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + mpc52xx_console_get_options(port, &baud, &parity, &bits, &flow); + + pr_debug("Setting console parameters: %i %i%c1 flow=%c\n", + baud, bits, parity, flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + + +static struct uart_driver mpc52xx_uart_driver; + +static struct console mpc52xx_console = { + .name = "ttyPSC", + .write = mpc52xx_console_write, + .device = uart_console_device, + .setup = mpc52xx_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, /* Specified on the cmdline (e.g. console=ttyPSC0) */ + .data = &mpc52xx_uart_driver, +}; + + +static int __init +mpc52xx_console_init(void) +{ + mpc52xx_uart_of_enumerate(); + register_console(&mpc52xx_console); + return 0; +} + +console_initcall(mpc52xx_console_init); + +#define MPC52xx_PSC_CONSOLE &mpc52xx_console +#else +#define MPC52xx_PSC_CONSOLE NULL +#endif + + +/* ======================================================================== */ +/* UART Driver */ +/* ======================================================================== */ + +static struct uart_driver mpc52xx_uart_driver = { + .driver_name = "mpc52xx_psc_uart", + .dev_name = "ttyPSC", + .major = SERIAL_PSC_MAJOR, + .minor = SERIAL_PSC_MINOR, + .nr = MPC52xx_PSC_MAXNUM, + .cons = MPC52xx_PSC_CONSOLE, +}; + +/* ======================================================================== */ +/* OF Platform Driver */ +/* ======================================================================== */ + +static const struct of_device_id mpc52xx_uart_of_match[] = { +#ifdef CONFIG_PPC_MPC52xx + { .compatible = "fsl,mpc5200b-psc-uart", .data = &mpc5200b_psc_ops, }, + { .compatible = "fsl,mpc5200-psc-uart", .data = &mpc52xx_psc_ops, }, + /* binding used by old lite5200 device trees: */ + { .compatible = "mpc5200-psc-uart", .data = &mpc52xx_psc_ops, }, + /* binding used by efika: */ + { .compatible = "mpc5200-serial", .data = &mpc52xx_psc_ops, }, +#endif +#ifdef CONFIG_PPC_MPC512x + { .compatible = "fsl,mpc5121-psc-uart", .data = &mpc512x_psc_ops, }, + { .compatible = "fsl,mpc5125-psc-uart", .data = &mpc5125_psc_ops, }, +#endif + {}, +}; + +static int mpc52xx_uart_of_probe(struct platform_device *op) +{ + int idx = -1; + unsigned int uartclk; + struct uart_port *port = NULL; + struct resource res; + int ret; + + /* Check validity & presence */ + for (idx = 0; idx < MPC52xx_PSC_MAXNUM; idx++) + if (mpc52xx_uart_nodes[idx] == op->dev.of_node) + break; + if (idx >= MPC52xx_PSC_MAXNUM) + return -EINVAL; + pr_debug("Found %pOF assigned to ttyPSC%x\n", + mpc52xx_uart_nodes[idx], idx); + + /* set the uart clock to the input clock of the psc, the different + * prescalers are taken into account in the set_baudrate() methods + * of the respective chip */ + uartclk = mpc5xxx_get_bus_frequency(op->dev.of_node); + if (uartclk == 0) { + dev_dbg(&op->dev, "Could not find uart clock frequency!\n"); + return -EINVAL; + } + + /* Init the port structure */ + port = &mpc52xx_uart_ports[idx]; + + spin_lock_init(&port->lock); + port->uartclk = uartclk; + port->fifosize = 512; + port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_MPC52xx_CONSOLE); + port->iotype = UPIO_MEM; + port->flags = UPF_BOOT_AUTOCONF | + (uart_console(port) ? 0 : UPF_IOREMAP); + port->line = idx; + port->ops = &mpc52xx_uart_ops; + port->dev = &op->dev; + + /* Search for IRQ and mapbase */ + ret = of_address_to_resource(op->dev.of_node, 0, &res); + if (ret) + return ret; + + port->mapbase = res.start; + if (!port->mapbase) { + dev_dbg(&op->dev, "Could not allocate resources for PSC\n"); + return -EINVAL; + } + + psc_ops->get_irq(port, op->dev.of_node); + if (port->irq == 0) { + dev_dbg(&op->dev, "Could not get irq\n"); + return -EINVAL; + } + + dev_dbg(&op->dev, "mpc52xx-psc uart at %p, irq=%x, freq=%i\n", + (void *)port->mapbase, port->irq, port->uartclk); + + /* Add the port to the uart sub-system */ + ret = uart_add_one_port(&mpc52xx_uart_driver, port); + if (ret) + return ret; + + platform_set_drvdata(op, (void *)port); + return 0; +} + +static int +mpc52xx_uart_of_remove(struct platform_device *op) +{ + struct uart_port *port = platform_get_drvdata(op); + + if (port) + uart_remove_one_port(&mpc52xx_uart_driver, port); + + return 0; +} + +#ifdef CONFIG_PM +static int +mpc52xx_uart_of_suspend(struct platform_device *op, pm_message_t state) +{ + struct uart_port *port = platform_get_drvdata(op); + + if (port) + uart_suspend_port(&mpc52xx_uart_driver, port); + + return 0; +} + +static int +mpc52xx_uart_of_resume(struct platform_device *op) +{ + struct uart_port *port = platform_get_drvdata(op); + + if (port) + uart_resume_port(&mpc52xx_uart_driver, port); + + return 0; +} +#endif + +static void +mpc52xx_uart_of_assign(struct device_node *np) +{ + int i; + + /* Find the first free PSC number */ + for (i = 0; i < MPC52xx_PSC_MAXNUM; i++) { + if (mpc52xx_uart_nodes[i] == NULL) { + of_node_get(np); + mpc52xx_uart_nodes[i] = np; + return; + } + } +} + +static void +mpc52xx_uart_of_enumerate(void) +{ + static int enum_done; + struct device_node *np; + const struct of_device_id *match; + int i; + + if (enum_done) + return; + + /* Assign index to each PSC in device tree */ + for_each_matching_node(np, mpc52xx_uart_of_match) { + match = of_match_node(mpc52xx_uart_of_match, np); + psc_ops = match->data; + mpc52xx_uart_of_assign(np); + } + + enum_done = 1; + + for (i = 0; i < MPC52xx_PSC_MAXNUM; i++) { + if (mpc52xx_uart_nodes[i]) + pr_debug("%pOF assigned to ttyPSC%x\n", + mpc52xx_uart_nodes[i], i); + } +} + +MODULE_DEVICE_TABLE(of, mpc52xx_uart_of_match); + +static struct platform_driver mpc52xx_uart_of_driver = { + .probe = mpc52xx_uart_of_probe, + .remove = mpc52xx_uart_of_remove, +#ifdef CONFIG_PM + .suspend = mpc52xx_uart_of_suspend, + .resume = mpc52xx_uart_of_resume, +#endif + .driver = { + .name = "mpc52xx-psc-uart", + .of_match_table = mpc52xx_uart_of_match, + }, +}; + + +/* ======================================================================== */ +/* Module */ +/* ======================================================================== */ + +static int __init +mpc52xx_uart_init(void) +{ + int ret; + + printk(KERN_INFO "Serial: MPC52xx PSC UART driver\n"); + + ret = uart_register_driver(&mpc52xx_uart_driver); + if (ret) { + printk(KERN_ERR "%s: uart_register_driver failed (%i)\n", + __FILE__, ret); + return ret; + } + + mpc52xx_uart_of_enumerate(); + + /* + * Map the PSC FIFO Controller and init if on MPC512x. + */ + if (psc_ops && psc_ops->fifoc_init) { + ret = psc_ops->fifoc_init(); + if (ret) + goto err_init; + } + + ret = platform_driver_register(&mpc52xx_uart_of_driver); + if (ret) { + printk(KERN_ERR "%s: platform_driver_register failed (%i)\n", + __FILE__, ret); + goto err_reg; + } + + return 0; +err_reg: + if (psc_ops && psc_ops->fifoc_uninit) + psc_ops->fifoc_uninit(); +err_init: + uart_unregister_driver(&mpc52xx_uart_driver); + return ret; +} + +static void __exit +mpc52xx_uart_exit(void) +{ + if (psc_ops->fifoc_uninit) + psc_ops->fifoc_uninit(); + + platform_driver_unregister(&mpc52xx_uart_of_driver); + uart_unregister_driver(&mpc52xx_uart_driver); +} + + +module_init(mpc52xx_uart_init); +module_exit(mpc52xx_uart_exit); + +MODULE_AUTHOR("Sylvain Munaut "); +MODULE_DESCRIPTION("Freescale MPC52xx PSC UART"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/mps2-uart.c b/drivers/tty/serial/mps2-uart.c new file mode 100644 index 000000000..587b42f75 --- /dev/null +++ b/drivers/tty/serial/mps2-uart.c @@ -0,0 +1,655 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * MPS2 UART driver + * + * Copyright (C) 2015 ARM Limited + * + * Author: Vladimir Murzin + * + * TODO: support for SysRq + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define SERIAL_NAME "ttyMPS" +#define DRIVER_NAME "mps2-uart" +#define MAKE_NAME(x) (DRIVER_NAME # x) + +#define UARTn_DATA 0x00 + +#define UARTn_STATE 0x04 +#define UARTn_STATE_TX_FULL BIT(0) +#define UARTn_STATE_RX_FULL BIT(1) +#define UARTn_STATE_TX_OVERRUN BIT(2) +#define UARTn_STATE_RX_OVERRUN BIT(3) + +#define UARTn_CTRL 0x08 +#define UARTn_CTRL_TX_ENABLE BIT(0) +#define UARTn_CTRL_RX_ENABLE BIT(1) +#define UARTn_CTRL_TX_INT_ENABLE BIT(2) +#define UARTn_CTRL_RX_INT_ENABLE BIT(3) +#define UARTn_CTRL_TX_OVERRUN_INT_ENABLE BIT(4) +#define UARTn_CTRL_RX_OVERRUN_INT_ENABLE BIT(5) + +#define UARTn_INT 0x0c +#define UARTn_INT_TX BIT(0) +#define UARTn_INT_RX BIT(1) +#define UARTn_INT_TX_OVERRUN BIT(2) +#define UARTn_INT_RX_OVERRUN BIT(3) + +#define UARTn_BAUDDIV 0x10 +#define UARTn_BAUDDIV_MASK GENMASK(20, 0) + +/* + * Helpers to make typical enable/disable operations more readable. + */ +#define UARTn_CTRL_TX_GRP (UARTn_CTRL_TX_ENABLE |\ + UARTn_CTRL_TX_INT_ENABLE |\ + UARTn_CTRL_TX_OVERRUN_INT_ENABLE) + +#define UARTn_CTRL_RX_GRP (UARTn_CTRL_RX_ENABLE |\ + UARTn_CTRL_RX_INT_ENABLE |\ + UARTn_CTRL_RX_OVERRUN_INT_ENABLE) + +#define MPS2_MAX_PORTS 3 + +#define UART_PORT_COMBINED_IRQ BIT(0) + +struct mps2_uart_port { + struct uart_port port; + struct clk *clk; + unsigned int tx_irq; + unsigned int rx_irq; + unsigned int flags; +}; + +static inline struct mps2_uart_port *to_mps2_port(struct uart_port *port) +{ + return container_of(port, struct mps2_uart_port, port); +} + +static void mps2_uart_write8(struct uart_port *port, u8 val, unsigned int off) +{ + struct mps2_uart_port *mps_port = to_mps2_port(port); + + writeb(val, mps_port->port.membase + off); +} + +static u8 mps2_uart_read8(struct uart_port *port, unsigned int off) +{ + struct mps2_uart_port *mps_port = to_mps2_port(port); + + return readb(mps_port->port.membase + off); +} + +static void mps2_uart_write32(struct uart_port *port, u32 val, unsigned int off) +{ + struct mps2_uart_port *mps_port = to_mps2_port(port); + + writel_relaxed(val, mps_port->port.membase + off); +} + +static unsigned int mps2_uart_tx_empty(struct uart_port *port) +{ + u8 status = mps2_uart_read8(port, UARTn_STATE); + + return (status & UARTn_STATE_TX_FULL) ? 0 : TIOCSER_TEMT; +} + +static void mps2_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} + +static unsigned int mps2_uart_get_mctrl(struct uart_port *port) +{ + return TIOCM_CAR | TIOCM_CTS | TIOCM_DSR; +} + +static void mps2_uart_stop_tx(struct uart_port *port) +{ + u8 control = mps2_uart_read8(port, UARTn_CTRL); + + control &= ~UARTn_CTRL_TX_INT_ENABLE; + + mps2_uart_write8(port, control, UARTn_CTRL); +} + +static void mps2_uart_tx_chars(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + + while (!(mps2_uart_read8(port, UARTn_STATE) & UARTn_STATE_TX_FULL)) { + if (port->x_char) { + mps2_uart_write8(port, port->x_char, UARTn_DATA); + port->x_char = 0; + port->icount.tx++; + continue; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) + break; + + mps2_uart_write8(port, xmit->buf[xmit->tail], UARTn_DATA); + xmit->tail = (xmit->tail + 1) % UART_XMIT_SIZE; + port->icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + mps2_uart_stop_tx(port); +} + +static void mps2_uart_start_tx(struct uart_port *port) +{ + u8 control = mps2_uart_read8(port, UARTn_CTRL); + + control |= UARTn_CTRL_TX_INT_ENABLE; + + mps2_uart_write8(port, control, UARTn_CTRL); + + /* + * We've just unmasked the TX IRQ and now slow-starting via + * polling; if there is enough data to fill up the internal + * write buffer in one go, the TX IRQ should assert, at which + * point we switch to fully interrupt-driven TX. + */ + + mps2_uart_tx_chars(port); +} + +static void mps2_uart_stop_rx(struct uart_port *port) +{ + u8 control = mps2_uart_read8(port, UARTn_CTRL); + + control &= ~UARTn_CTRL_RX_GRP; + + mps2_uart_write8(port, control, UARTn_CTRL); +} + +static void mps2_uart_break_ctl(struct uart_port *port, int ctl) +{ +} + +static void mps2_uart_rx_chars(struct uart_port *port) +{ + struct tty_port *tport = &port->state->port; + + while (mps2_uart_read8(port, UARTn_STATE) & UARTn_STATE_RX_FULL) { + u8 rxdata = mps2_uart_read8(port, UARTn_DATA); + + port->icount.rx++; + tty_insert_flip_char(&port->state->port, rxdata, TTY_NORMAL); + } + + tty_flip_buffer_push(tport); +} + +static irqreturn_t mps2_uart_rxirq(int irq, void *data) +{ + struct uart_port *port = data; + u8 irqflag = mps2_uart_read8(port, UARTn_INT); + + if (unlikely(!(irqflag & UARTn_INT_RX))) + return IRQ_NONE; + + spin_lock(&port->lock); + + mps2_uart_write8(port, UARTn_INT_RX, UARTn_INT); + mps2_uart_rx_chars(port); + + spin_unlock(&port->lock); + + return IRQ_HANDLED; +} + +static irqreturn_t mps2_uart_txirq(int irq, void *data) +{ + struct uart_port *port = data; + u8 irqflag = mps2_uart_read8(port, UARTn_INT); + + if (unlikely(!(irqflag & UARTn_INT_TX))) + return IRQ_NONE; + + spin_lock(&port->lock); + + mps2_uart_write8(port, UARTn_INT_TX, UARTn_INT); + mps2_uart_tx_chars(port); + + spin_unlock(&port->lock); + + return IRQ_HANDLED; +} + +static irqreturn_t mps2_uart_oerrirq(int irq, void *data) +{ + irqreturn_t handled = IRQ_NONE; + struct uart_port *port = data; + u8 irqflag = mps2_uart_read8(port, UARTn_INT); + + spin_lock(&port->lock); + + if (irqflag & UARTn_INT_RX_OVERRUN) { + struct tty_port *tport = &port->state->port; + + mps2_uart_write8(port, UARTn_INT_RX_OVERRUN, UARTn_INT); + port->icount.overrun++; + tty_insert_flip_char(tport, 0, TTY_OVERRUN); + tty_flip_buffer_push(tport); + handled = IRQ_HANDLED; + } + + /* + * It's never been seen in practice and it never *should* happen since + * we check if there is enough room in TX buffer before sending data. + * So we keep this check in case something suspicious has happened. + */ + if (irqflag & UARTn_INT_TX_OVERRUN) { + mps2_uart_write8(port, UARTn_INT_TX_OVERRUN, UARTn_INT); + handled = IRQ_HANDLED; + } + + spin_unlock(&port->lock); + + return handled; +} + +static irqreturn_t mps2_uart_combinedirq(int irq, void *data) +{ + if (mps2_uart_rxirq(irq, data) == IRQ_HANDLED) + return IRQ_HANDLED; + + if (mps2_uart_txirq(irq, data) == IRQ_HANDLED) + return IRQ_HANDLED; + + if (mps2_uart_oerrirq(irq, data) == IRQ_HANDLED) + return IRQ_HANDLED; + + return IRQ_NONE; +} + +static int mps2_uart_startup(struct uart_port *port) +{ + struct mps2_uart_port *mps_port = to_mps2_port(port); + u8 control = mps2_uart_read8(port, UARTn_CTRL); + int ret; + + control &= ~(UARTn_CTRL_RX_GRP | UARTn_CTRL_TX_GRP); + + mps2_uart_write8(port, control, UARTn_CTRL); + + if (mps_port->flags & UART_PORT_COMBINED_IRQ) { + ret = request_irq(port->irq, mps2_uart_combinedirq, 0, + MAKE_NAME(-combined), mps_port); + + if (ret) { + dev_err(port->dev, "failed to register combinedirq (%d)\n", ret); + return ret; + } + } else { + ret = request_irq(port->irq, mps2_uart_oerrirq, IRQF_SHARED, + MAKE_NAME(-overrun), mps_port); + + if (ret) { + dev_err(port->dev, "failed to register oerrirq (%d)\n", ret); + return ret; + } + + ret = request_irq(mps_port->rx_irq, mps2_uart_rxirq, 0, + MAKE_NAME(-rx), mps_port); + if (ret) { + dev_err(port->dev, "failed to register rxirq (%d)\n", ret); + goto err_free_oerrirq; + } + + ret = request_irq(mps_port->tx_irq, mps2_uart_txirq, 0, + MAKE_NAME(-tx), mps_port); + if (ret) { + dev_err(port->dev, "failed to register txirq (%d)\n", ret); + goto err_free_rxirq; + } + + } + + control |= UARTn_CTRL_RX_GRP | UARTn_CTRL_TX_GRP; + + mps2_uart_write8(port, control, UARTn_CTRL); + + return 0; + +err_free_rxirq: + free_irq(mps_port->rx_irq, mps_port); +err_free_oerrirq: + free_irq(port->irq, mps_port); + + return ret; +} + +static void mps2_uart_shutdown(struct uart_port *port) +{ + struct mps2_uart_port *mps_port = to_mps2_port(port); + u8 control = mps2_uart_read8(port, UARTn_CTRL); + + control &= ~(UARTn_CTRL_RX_GRP | UARTn_CTRL_TX_GRP); + + mps2_uart_write8(port, control, UARTn_CTRL); + + if (!(mps_port->flags & UART_PORT_COMBINED_IRQ)) { + free_irq(mps_port->rx_irq, mps_port); + free_irq(mps_port->tx_irq, mps_port); + } + + free_irq(port->irq, mps_port); +} + +static void +mps2_uart_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + unsigned long flags; + unsigned int baud, bauddiv; + + termios->c_cflag &= ~(CRTSCTS | CMSPAR); + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= CS8; + termios->c_cflag &= ~PARENB; + termios->c_cflag &= ~CSTOPB; + + baud = uart_get_baud_rate(port, termios, old, + DIV_ROUND_CLOSEST(port->uartclk, UARTn_BAUDDIV_MASK), + DIV_ROUND_CLOSEST(port->uartclk, 16)); + + bauddiv = DIV_ROUND_CLOSEST(port->uartclk, baud); + + spin_lock_irqsave(&port->lock, flags); + + uart_update_timeout(port, termios->c_cflag, baud); + mps2_uart_write32(port, bauddiv, UARTn_BAUDDIV); + + spin_unlock_irqrestore(&port->lock, flags); + + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, baud, baud); +} + +static const char *mps2_uart_type(struct uart_port *port) +{ + return (port->type == PORT_MPS2UART) ? DRIVER_NAME : NULL; +} + +static void mps2_uart_release_port(struct uart_port *port) +{ +} + +static int mps2_uart_request_port(struct uart_port *port) +{ + return 0; +} + +static void mps2_uart_config_port(struct uart_port *port, int type) +{ + if (type & UART_CONFIG_TYPE && !mps2_uart_request_port(port)) + port->type = PORT_MPS2UART; +} + +static int mps2_uart_verify_port(struct uart_port *port, struct serial_struct *serinfo) +{ + return -EINVAL; +} + +static const struct uart_ops mps2_uart_pops = { + .tx_empty = mps2_uart_tx_empty, + .set_mctrl = mps2_uart_set_mctrl, + .get_mctrl = mps2_uart_get_mctrl, + .stop_tx = mps2_uart_stop_tx, + .start_tx = mps2_uart_start_tx, + .stop_rx = mps2_uart_stop_rx, + .break_ctl = mps2_uart_break_ctl, + .startup = mps2_uart_startup, + .shutdown = mps2_uart_shutdown, + .set_termios = mps2_uart_set_termios, + .type = mps2_uart_type, + .release_port = mps2_uart_release_port, + .request_port = mps2_uart_request_port, + .config_port = mps2_uart_config_port, + .verify_port = mps2_uart_verify_port, +}; + +static DEFINE_IDR(ports_idr); + +#ifdef CONFIG_SERIAL_MPS2_UART_CONSOLE +static void mps2_uart_console_putchar(struct uart_port *port, int ch) +{ + while (mps2_uart_read8(port, UARTn_STATE) & UARTn_STATE_TX_FULL) + cpu_relax(); + + mps2_uart_write8(port, ch, UARTn_DATA); +} + +static void mps2_uart_console_write(struct console *co, const char *s, unsigned int cnt) +{ + struct mps2_uart_port *mps_port = idr_find(&ports_idr, co->index); + struct uart_port *port = &mps_port->port; + + uart_console_write(port, s, cnt, mps2_uart_console_putchar); +} + +static int mps2_uart_console_setup(struct console *co, char *options) +{ + struct mps2_uart_port *mps_port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index < 0 || co->index >= MPS2_MAX_PORTS) + return -ENODEV; + + mps_port = idr_find(&ports_idr, co->index); + + if (!mps_port) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&mps_port->port, co, baud, parity, bits, flow); +} + +static struct uart_driver mps2_uart_driver; + +static struct console mps2_uart_console = { + .name = SERIAL_NAME, + .device = uart_console_device, + .write = mps2_uart_console_write, + .setup = mps2_uart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &mps2_uart_driver, +}; + +#define MPS2_SERIAL_CONSOLE (&mps2_uart_console) + +static void mps2_early_putchar(struct uart_port *port, int ch) +{ + while (readb(port->membase + UARTn_STATE) & UARTn_STATE_TX_FULL) + cpu_relax(); + + writeb((unsigned char)ch, port->membase + UARTn_DATA); +} + +static void mps2_early_write(struct console *con, const char *s, unsigned int n) +{ + struct earlycon_device *dev = con->data; + + uart_console_write(&dev->port, s, n, mps2_early_putchar); +} + +static int __init mps2_early_console_setup(struct earlycon_device *device, + const char *opt) +{ + if (!device->port.membase) + return -ENODEV; + + device->con->write = mps2_early_write; + + return 0; +} + +OF_EARLYCON_DECLARE(mps2, "arm,mps2-uart", mps2_early_console_setup); + +#else +#define MPS2_SERIAL_CONSOLE NULL +#endif + +static struct uart_driver mps2_uart_driver = { + .driver_name = DRIVER_NAME, + .dev_name = SERIAL_NAME, + .nr = MPS2_MAX_PORTS, + .cons = MPS2_SERIAL_CONSOLE, +}; + +static int mps2_of_get_port(struct platform_device *pdev, + struct mps2_uart_port *mps_port) +{ + struct device_node *np = pdev->dev.of_node; + int id; + + if (!np) + return -ENODEV; + + id = of_alias_get_id(np, "serial"); + + if (id < 0) + id = idr_alloc_cyclic(&ports_idr, (void *)mps_port, 0, MPS2_MAX_PORTS, GFP_KERNEL); + else + id = idr_alloc(&ports_idr, (void *)mps_port, id, MPS2_MAX_PORTS, GFP_KERNEL); + + if (id < 0) + return id; + + /* Only combined irq is presesnt */ + if (platform_irq_count(pdev) == 1) + mps_port->flags |= UART_PORT_COMBINED_IRQ; + + mps_port->port.line = id; + + return 0; +} + +static int mps2_init_port(struct platform_device *pdev, + struct mps2_uart_port *mps_port) +{ + struct resource *res; + int ret; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + mps_port->port.membase = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(mps_port->port.membase)) + return PTR_ERR(mps_port->port.membase); + + mps_port->port.mapbase = res->start; + mps_port->port.mapsize = resource_size(res); + mps_port->port.iotype = UPIO_MEM; + mps_port->port.flags = UPF_BOOT_AUTOCONF; + mps_port->port.fifosize = 1; + mps_port->port.ops = &mps2_uart_pops; + mps_port->port.dev = &pdev->dev; + + mps_port->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(mps_port->clk)) + return PTR_ERR(mps_port->clk); + + ret = clk_prepare_enable(mps_port->clk); + if (ret) + return ret; + + mps_port->port.uartclk = clk_get_rate(mps_port->clk); + + clk_disable_unprepare(mps_port->clk); + + + if (mps_port->flags & UART_PORT_COMBINED_IRQ) { + mps_port->port.irq = platform_get_irq(pdev, 0); + } else { + mps_port->rx_irq = platform_get_irq(pdev, 0); + mps_port->tx_irq = platform_get_irq(pdev, 1); + mps_port->port.irq = platform_get_irq(pdev, 2); + } + + return ret; +} + +static int mps2_serial_probe(struct platform_device *pdev) +{ + struct mps2_uart_port *mps_port; + int ret; + + mps_port = devm_kzalloc(&pdev->dev, sizeof(struct mps2_uart_port), GFP_KERNEL); + + if (!mps_port) + return -ENOMEM; + + ret = mps2_of_get_port(pdev, mps_port); + if (ret) + return ret; + + ret = mps2_init_port(pdev, mps_port); + if (ret) + return ret; + + ret = uart_add_one_port(&mps2_uart_driver, &mps_port->port); + if (ret) + return ret; + + platform_set_drvdata(pdev, mps_port); + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id mps2_match[] = { + { .compatible = "arm,mps2-uart", }, + {}, +}; +#endif + +static struct platform_driver mps2_serial_driver = { + .probe = mps2_serial_probe, + + .driver = { + .name = DRIVER_NAME, + .of_match_table = of_match_ptr(mps2_match), + .suppress_bind_attrs = true, + }, +}; + +static int __init mps2_uart_init(void) +{ + int ret; + + ret = uart_register_driver(&mps2_uart_driver); + if (ret) + return ret; + + ret = platform_driver_register(&mps2_serial_driver); + if (ret) + uart_unregister_driver(&mps2_uart_driver); + + return ret; +} +arch_initcall(mps2_uart_init); diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c new file mode 100644 index 000000000..27023a56f --- /dev/null +++ b/drivers/tty/serial/msm_serial.c @@ -0,0 +1,1918 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for msm7k serial device and console + * + * Copyright (C) 2007 Google, Inc. + * Author: Robert Love + * Copyright (c) 2011, Code Aurora Forum. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define UART_MR1 0x0000 + +#define UART_MR1_AUTO_RFR_LEVEL0 0x3F +#define UART_MR1_AUTO_RFR_LEVEL1 0x3FF00 +#define UART_DM_MR1_AUTO_RFR_LEVEL1 0xFFFFFF00 +#define UART_MR1_RX_RDY_CTL BIT(7) +#define UART_MR1_CTS_CTL BIT(6) + +#define UART_MR2 0x0004 +#define UART_MR2_ERROR_MODE BIT(6) +#define UART_MR2_BITS_PER_CHAR 0x30 +#define UART_MR2_BITS_PER_CHAR_5 (0x0 << 4) +#define UART_MR2_BITS_PER_CHAR_6 (0x1 << 4) +#define UART_MR2_BITS_PER_CHAR_7 (0x2 << 4) +#define UART_MR2_BITS_PER_CHAR_8 (0x3 << 4) +#define UART_MR2_STOP_BIT_LEN_ONE (0x1 << 2) +#define UART_MR2_STOP_BIT_LEN_TWO (0x3 << 2) +#define UART_MR2_PARITY_MODE_NONE 0x0 +#define UART_MR2_PARITY_MODE_ODD 0x1 +#define UART_MR2_PARITY_MODE_EVEN 0x2 +#define UART_MR2_PARITY_MODE_SPACE 0x3 +#define UART_MR2_PARITY_MODE 0x3 + +#define UART_CSR 0x0008 + +#define UART_TF 0x000C +#define UARTDM_TF 0x0070 + +#define UART_CR 0x0010 +#define UART_CR_CMD_NULL (0 << 4) +#define UART_CR_CMD_RESET_RX (1 << 4) +#define UART_CR_CMD_RESET_TX (2 << 4) +#define UART_CR_CMD_RESET_ERR (3 << 4) +#define UART_CR_CMD_RESET_BREAK_INT (4 << 4) +#define UART_CR_CMD_START_BREAK (5 << 4) +#define UART_CR_CMD_STOP_BREAK (6 << 4) +#define UART_CR_CMD_RESET_CTS (7 << 4) +#define UART_CR_CMD_RESET_STALE_INT (8 << 4) +#define UART_CR_CMD_PACKET_MODE (9 << 4) +#define UART_CR_CMD_MODE_RESET (12 << 4) +#define UART_CR_CMD_SET_RFR (13 << 4) +#define UART_CR_CMD_RESET_RFR (14 << 4) +#define UART_CR_CMD_PROTECTION_EN (16 << 4) +#define UART_CR_CMD_STALE_EVENT_DISABLE (6 << 8) +#define UART_CR_CMD_STALE_EVENT_ENABLE (80 << 4) +#define UART_CR_CMD_FORCE_STALE (4 << 8) +#define UART_CR_CMD_RESET_TX_READY (3 << 8) +#define UART_CR_TX_DISABLE BIT(3) +#define UART_CR_TX_ENABLE BIT(2) +#define UART_CR_RX_DISABLE BIT(1) +#define UART_CR_RX_ENABLE BIT(0) +#define UART_CR_CMD_RESET_RXBREAK_START ((1 << 11) | (2 << 4)) + +#define UART_IMR 0x0014 +#define UART_IMR_TXLEV BIT(0) +#define UART_IMR_RXSTALE BIT(3) +#define UART_IMR_RXLEV BIT(4) +#define UART_IMR_DELTA_CTS BIT(5) +#define UART_IMR_CURRENT_CTS BIT(6) +#define UART_IMR_RXBREAK_START BIT(10) + +#define UART_IPR_RXSTALE_LAST 0x20 +#define UART_IPR_STALE_LSB 0x1F +#define UART_IPR_STALE_TIMEOUT_MSB 0x3FF80 +#define UART_DM_IPR_STALE_TIMEOUT_MSB 0xFFFFFF80 + +#define UART_IPR 0x0018 +#define UART_TFWR 0x001C +#define UART_RFWR 0x0020 +#define UART_HCR 0x0024 + +#define UART_MREG 0x0028 +#define UART_NREG 0x002C +#define UART_DREG 0x0030 +#define UART_MNDREG 0x0034 +#define UART_IRDA 0x0038 +#define UART_MISR_MODE 0x0040 +#define UART_MISR_RESET 0x0044 +#define UART_MISR_EXPORT 0x0048 +#define UART_MISR_VAL 0x004C +#define UART_TEST_CTRL 0x0050 + +#define UART_SR 0x0008 +#define UART_SR_HUNT_CHAR BIT(7) +#define UART_SR_RX_BREAK BIT(6) +#define UART_SR_PAR_FRAME_ERR BIT(5) +#define UART_SR_OVERRUN BIT(4) +#define UART_SR_TX_EMPTY BIT(3) +#define UART_SR_TX_READY BIT(2) +#define UART_SR_RX_FULL BIT(1) +#define UART_SR_RX_READY BIT(0) + +#define UART_RF 0x000C +#define UARTDM_RF 0x0070 +#define UART_MISR 0x0010 +#define UART_ISR 0x0014 +#define UART_ISR_TX_READY BIT(7) + +#define UARTDM_RXFS 0x50 +#define UARTDM_RXFS_BUF_SHIFT 0x7 +#define UARTDM_RXFS_BUF_MASK 0x7 + +#define UARTDM_DMEN 0x3C +#define UARTDM_DMEN_RX_SC_ENABLE BIT(5) +#define UARTDM_DMEN_TX_SC_ENABLE BIT(4) + +#define UARTDM_DMEN_TX_BAM_ENABLE BIT(2) /* UARTDM_1P4 */ +#define UARTDM_DMEN_TX_DM_ENABLE BIT(0) /* < UARTDM_1P4 */ + +#define UARTDM_DMEN_RX_BAM_ENABLE BIT(3) /* UARTDM_1P4 */ +#define UARTDM_DMEN_RX_DM_ENABLE BIT(1) /* < UARTDM_1P4 */ + +#define UARTDM_DMRX 0x34 +#define UARTDM_NCF_TX 0x40 +#define UARTDM_RX_TOTAL_SNAP 0x38 + +#define UARTDM_BURST_SIZE 16 /* in bytes */ +#define UARTDM_TX_AIGN(x) ((x) & ~0x3) /* valid for > 1p3 */ +#define UARTDM_TX_MAX 256 /* in bytes, valid for <= 1p3 */ +#define UARTDM_RX_SIZE (UART_XMIT_SIZE / 4) + +enum { + UARTDM_1P1 = 1, + UARTDM_1P2, + UARTDM_1P3, + UARTDM_1P4, +}; + +struct msm_dma { + struct dma_chan *chan; + enum dma_data_direction dir; + dma_addr_t phys; + unsigned char *virt; + dma_cookie_t cookie; + u32 enable_bit; + unsigned int count; + struct dma_async_tx_descriptor *desc; +}; + +struct msm_port { + struct uart_port uart; + char name[16]; + struct clk *clk; + struct clk *pclk; + unsigned int imr; + int is_uartdm; + unsigned int old_snap_state; + bool break_detected; + struct msm_dma tx_dma; + struct msm_dma rx_dma; +}; + +#define UART_TO_MSM(uart_port) container_of(uart_port, struct msm_port, uart) + +static +void msm_write(struct uart_port *port, unsigned int val, unsigned int off) +{ + writel_relaxed(val, port->membase + off); +} + +static +unsigned int msm_read(struct uart_port *port, unsigned int off) +{ + return readl_relaxed(port->membase + off); +} + +/* + * Setup the MND registers to use the TCXO clock. + */ +static void msm_serial_set_mnd_regs_tcxo(struct uart_port *port) +{ + msm_write(port, 0x06, UART_MREG); + msm_write(port, 0xF1, UART_NREG); + msm_write(port, 0x0F, UART_DREG); + msm_write(port, 0x1A, UART_MNDREG); + port->uartclk = 1843200; +} + +/* + * Setup the MND registers to use the TCXO clock divided by 4. + */ +static void msm_serial_set_mnd_regs_tcxoby4(struct uart_port *port) +{ + msm_write(port, 0x18, UART_MREG); + msm_write(port, 0xF6, UART_NREG); + msm_write(port, 0x0F, UART_DREG); + msm_write(port, 0x0A, UART_MNDREG); + port->uartclk = 1843200; +} + +static void msm_serial_set_mnd_regs(struct uart_port *port) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + + /* + * These registers don't exist so we change the clk input rate + * on uartdm hardware instead + */ + if (msm_port->is_uartdm) + return; + + if (port->uartclk == 19200000) + msm_serial_set_mnd_regs_tcxo(port); + else if (port->uartclk == 4800000) + msm_serial_set_mnd_regs_tcxoby4(port); +} + +static void msm_handle_tx(struct uart_port *port); +static void msm_start_rx_dma(struct msm_port *msm_port); + +static void msm_stop_dma(struct uart_port *port, struct msm_dma *dma) +{ + struct device *dev = port->dev; + unsigned int mapped; + u32 val; + + mapped = dma->count; + dma->count = 0; + + dmaengine_terminate_all(dma->chan); + + /* + * DMA Stall happens if enqueue and flush command happens concurrently. + * For example before changing the baud rate/protocol configuration and + * sending flush command to ADM, disable the channel of UARTDM. + * Note: should not reset the receiver here immediately as it is not + * suggested to do disable/reset or reset/disable at the same time. + */ + val = msm_read(port, UARTDM_DMEN); + val &= ~dma->enable_bit; + msm_write(port, val, UARTDM_DMEN); + + if (mapped) + dma_unmap_single(dev, dma->phys, mapped, dma->dir); +} + +static void msm_release_dma(struct msm_port *msm_port) +{ + struct msm_dma *dma; + + dma = &msm_port->tx_dma; + if (dma->chan) { + msm_stop_dma(&msm_port->uart, dma); + dma_release_channel(dma->chan); + } + + memset(dma, 0, sizeof(*dma)); + + dma = &msm_port->rx_dma; + if (dma->chan) { + msm_stop_dma(&msm_port->uart, dma); + dma_release_channel(dma->chan); + kfree(dma->virt); + } + + memset(dma, 0, sizeof(*dma)); +} + +static void msm_request_tx_dma(struct msm_port *msm_port, resource_size_t base) +{ + struct device *dev = msm_port->uart.dev; + struct dma_slave_config conf; + struct msm_dma *dma; + u32 crci = 0; + int ret; + + dma = &msm_port->tx_dma; + + /* allocate DMA resources, if available */ + dma->chan = dma_request_chan(dev, "tx"); + if (IS_ERR(dma->chan)) + goto no_tx; + + of_property_read_u32(dev->of_node, "qcom,tx-crci", &crci); + + memset(&conf, 0, sizeof(conf)); + conf.direction = DMA_MEM_TO_DEV; + conf.device_fc = true; + conf.dst_addr = base + UARTDM_TF; + conf.dst_maxburst = UARTDM_BURST_SIZE; + conf.slave_id = crci; + + ret = dmaengine_slave_config(dma->chan, &conf); + if (ret) + goto rel_tx; + + dma->dir = DMA_TO_DEVICE; + + if (msm_port->is_uartdm < UARTDM_1P4) + dma->enable_bit = UARTDM_DMEN_TX_DM_ENABLE; + else + dma->enable_bit = UARTDM_DMEN_TX_BAM_ENABLE; + + return; + +rel_tx: + dma_release_channel(dma->chan); +no_tx: + memset(dma, 0, sizeof(*dma)); +} + +static void msm_request_rx_dma(struct msm_port *msm_port, resource_size_t base) +{ + struct device *dev = msm_port->uart.dev; + struct dma_slave_config conf; + struct msm_dma *dma; + u32 crci = 0; + int ret; + + dma = &msm_port->rx_dma; + + /* allocate DMA resources, if available */ + dma->chan = dma_request_chan(dev, "rx"); + if (IS_ERR(dma->chan)) + goto no_rx; + + of_property_read_u32(dev->of_node, "qcom,rx-crci", &crci); + + dma->virt = kzalloc(UARTDM_RX_SIZE, GFP_KERNEL); + if (!dma->virt) + goto rel_rx; + + memset(&conf, 0, sizeof(conf)); + conf.direction = DMA_DEV_TO_MEM; + conf.device_fc = true; + conf.src_addr = base + UARTDM_RF; + conf.src_maxburst = UARTDM_BURST_SIZE; + conf.slave_id = crci; + + ret = dmaengine_slave_config(dma->chan, &conf); + if (ret) + goto err; + + dma->dir = DMA_FROM_DEVICE; + + if (msm_port->is_uartdm < UARTDM_1P4) + dma->enable_bit = UARTDM_DMEN_RX_DM_ENABLE; + else + dma->enable_bit = UARTDM_DMEN_RX_BAM_ENABLE; + + return; +err: + kfree(dma->virt); +rel_rx: + dma_release_channel(dma->chan); +no_rx: + memset(dma, 0, sizeof(*dma)); +} + +static inline void msm_wait_for_xmitr(struct uart_port *port) +{ + unsigned int timeout = 500000; + + while (!(msm_read(port, UART_SR) & UART_SR_TX_EMPTY)) { + if (msm_read(port, UART_ISR) & UART_ISR_TX_READY) + break; + udelay(1); + if (!timeout--) + break; + } + msm_write(port, UART_CR_CMD_RESET_TX_READY, UART_CR); +} + +static void msm_stop_tx(struct uart_port *port) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + + msm_port->imr &= ~UART_IMR_TXLEV; + msm_write(port, msm_port->imr, UART_IMR); +} + +static void msm_start_tx(struct uart_port *port) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + struct msm_dma *dma = &msm_port->tx_dma; + + /* Already started in DMA mode */ + if (dma->count) + return; + + msm_port->imr |= UART_IMR_TXLEV; + msm_write(port, msm_port->imr, UART_IMR); +} + +static void msm_reset_dm_count(struct uart_port *port, int count) +{ + msm_wait_for_xmitr(port); + msm_write(port, count, UARTDM_NCF_TX); + msm_read(port, UARTDM_NCF_TX); +} + +static void msm_complete_tx_dma(void *args) +{ + struct msm_port *msm_port = args; + struct uart_port *port = &msm_port->uart; + struct circ_buf *xmit = &port->state->xmit; + struct msm_dma *dma = &msm_port->tx_dma; + struct dma_tx_state state; + enum dma_status status; + unsigned long flags; + unsigned int count; + u32 val; + + spin_lock_irqsave(&port->lock, flags); + + /* Already stopped */ + if (!dma->count) + goto done; + + status = dmaengine_tx_status(dma->chan, dma->cookie, &state); + + dma_unmap_single(port->dev, dma->phys, dma->count, dma->dir); + + val = msm_read(port, UARTDM_DMEN); + val &= ~dma->enable_bit; + msm_write(port, val, UARTDM_DMEN); + + if (msm_port->is_uartdm > UARTDM_1P3) { + msm_write(port, UART_CR_CMD_RESET_TX, UART_CR); + msm_write(port, UART_CR_TX_ENABLE, UART_CR); + } + + count = dma->count - state.residue; + port->icount.tx += count; + dma->count = 0; + + xmit->tail += count; + xmit->tail &= UART_XMIT_SIZE - 1; + + /* Restore "Tx FIFO below watermark" interrupt */ + msm_port->imr |= UART_IMR_TXLEV; + msm_write(port, msm_port->imr, UART_IMR); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + msm_handle_tx(port); +done: + spin_unlock_irqrestore(&port->lock, flags); +} + +static int msm_handle_tx_dma(struct msm_port *msm_port, unsigned int count) +{ + struct circ_buf *xmit = &msm_port->uart.state->xmit; + struct uart_port *port = &msm_port->uart; + struct msm_dma *dma = &msm_port->tx_dma; + void *cpu_addr; + int ret; + u32 val; + + cpu_addr = &xmit->buf[xmit->tail]; + + dma->phys = dma_map_single(port->dev, cpu_addr, count, dma->dir); + ret = dma_mapping_error(port->dev, dma->phys); + if (ret) + return ret; + + dma->desc = dmaengine_prep_slave_single(dma->chan, dma->phys, + count, DMA_MEM_TO_DEV, + DMA_PREP_INTERRUPT | + DMA_PREP_FENCE); + if (!dma->desc) { + ret = -EIO; + goto unmap; + } + + dma->desc->callback = msm_complete_tx_dma; + dma->desc->callback_param = msm_port; + + dma->cookie = dmaengine_submit(dma->desc); + ret = dma_submit_error(dma->cookie); + if (ret) + goto unmap; + + /* + * Using DMA complete for Tx FIFO reload, no need for + * "Tx FIFO below watermark" one, disable it + */ + msm_port->imr &= ~UART_IMR_TXLEV; + msm_write(port, msm_port->imr, UART_IMR); + + dma->count = count; + + val = msm_read(port, UARTDM_DMEN); + val |= dma->enable_bit; + + if (msm_port->is_uartdm < UARTDM_1P4) + msm_write(port, val, UARTDM_DMEN); + + msm_reset_dm_count(port, count); + + if (msm_port->is_uartdm > UARTDM_1P3) + msm_write(port, val, UARTDM_DMEN); + + dma_async_issue_pending(dma->chan); + return 0; +unmap: + dma_unmap_single(port->dev, dma->phys, count, dma->dir); + return ret; +} + +static void msm_complete_rx_dma(void *args) +{ + struct msm_port *msm_port = args; + struct uart_port *port = &msm_port->uart; + struct tty_port *tport = &port->state->port; + struct msm_dma *dma = &msm_port->rx_dma; + int count = 0, i, sysrq; + unsigned long flags; + u32 val; + + spin_lock_irqsave(&port->lock, flags); + + /* Already stopped */ + if (!dma->count) + goto done; + + val = msm_read(port, UARTDM_DMEN); + val &= ~dma->enable_bit; + msm_write(port, val, UARTDM_DMEN); + + if (msm_read(port, UART_SR) & UART_SR_OVERRUN) { + port->icount.overrun++; + tty_insert_flip_char(tport, 0, TTY_OVERRUN); + msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR); + } + + count = msm_read(port, UARTDM_RX_TOTAL_SNAP); + + port->icount.rx += count; + + dma->count = 0; + + dma_unmap_single(port->dev, dma->phys, UARTDM_RX_SIZE, dma->dir); + + for (i = 0; i < count; i++) { + char flag = TTY_NORMAL; + + if (msm_port->break_detected && dma->virt[i] == 0) { + port->icount.brk++; + flag = TTY_BREAK; + msm_port->break_detected = false; + if (uart_handle_break(port)) + continue; + } + + if (!(port->read_status_mask & UART_SR_RX_BREAK)) + flag = TTY_NORMAL; + + spin_unlock_irqrestore(&port->lock, flags); + sysrq = uart_handle_sysrq_char(port, dma->virt[i]); + spin_lock_irqsave(&port->lock, flags); + if (!sysrq) + tty_insert_flip_char(tport, dma->virt[i], flag); + } + + msm_start_rx_dma(msm_port); +done: + spin_unlock_irqrestore(&port->lock, flags); + + if (count) + tty_flip_buffer_push(tport); +} + +static void msm_start_rx_dma(struct msm_port *msm_port) +{ + struct msm_dma *dma = &msm_port->rx_dma; + struct uart_port *uart = &msm_port->uart; + u32 val; + int ret; + + if (IS_ENABLED(CONFIG_CONSOLE_POLL)) + return; + + if (!dma->chan) + return; + + dma->phys = dma_map_single(uart->dev, dma->virt, + UARTDM_RX_SIZE, dma->dir); + ret = dma_mapping_error(uart->dev, dma->phys); + if (ret) + goto sw_mode; + + dma->desc = dmaengine_prep_slave_single(dma->chan, dma->phys, + UARTDM_RX_SIZE, DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT); + if (!dma->desc) + goto unmap; + + dma->desc->callback = msm_complete_rx_dma; + dma->desc->callback_param = msm_port; + + dma->cookie = dmaengine_submit(dma->desc); + ret = dma_submit_error(dma->cookie); + if (ret) + goto unmap; + /* + * Using DMA for FIFO off-load, no need for "Rx FIFO over + * watermark" or "stale" interrupts, disable them + */ + msm_port->imr &= ~(UART_IMR_RXLEV | UART_IMR_RXSTALE); + + /* + * Well, when DMA is ADM3 engine(implied by <= UARTDM v1.3), + * we need RXSTALE to flush input DMA fifo to memory + */ + if (msm_port->is_uartdm < UARTDM_1P4) + msm_port->imr |= UART_IMR_RXSTALE; + + msm_write(uart, msm_port->imr, UART_IMR); + + dma->count = UARTDM_RX_SIZE; + + dma_async_issue_pending(dma->chan); + + msm_write(uart, UART_CR_CMD_RESET_STALE_INT, UART_CR); + msm_write(uart, UART_CR_CMD_STALE_EVENT_ENABLE, UART_CR); + + val = msm_read(uart, UARTDM_DMEN); + val |= dma->enable_bit; + + if (msm_port->is_uartdm < UARTDM_1P4) + msm_write(uart, val, UARTDM_DMEN); + + msm_write(uart, UARTDM_RX_SIZE, UARTDM_DMRX); + + if (msm_port->is_uartdm > UARTDM_1P3) + msm_write(uart, val, UARTDM_DMEN); + + return; +unmap: + dma_unmap_single(uart->dev, dma->phys, UARTDM_RX_SIZE, dma->dir); + +sw_mode: + /* + * Switch from DMA to SW/FIFO mode. After clearing Rx BAM (UARTDM_DMEN), + * receiver must be reset. + */ + msm_write(uart, UART_CR_CMD_RESET_RX, UART_CR); + msm_write(uart, UART_CR_RX_ENABLE, UART_CR); + + msm_write(uart, UART_CR_CMD_RESET_STALE_INT, UART_CR); + msm_write(uart, 0xFFFFFF, UARTDM_DMRX); + msm_write(uart, UART_CR_CMD_STALE_EVENT_ENABLE, UART_CR); + + /* Re-enable RX interrupts */ + msm_port->imr |= (UART_IMR_RXLEV | UART_IMR_RXSTALE); + msm_write(uart, msm_port->imr, UART_IMR); +} + +static void msm_stop_rx(struct uart_port *port) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + struct msm_dma *dma = &msm_port->rx_dma; + + msm_port->imr &= ~(UART_IMR_RXLEV | UART_IMR_RXSTALE); + msm_write(port, msm_port->imr, UART_IMR); + + if (dma->chan) + msm_stop_dma(port, dma); +} + +static void msm_enable_ms(struct uart_port *port) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + + msm_port->imr |= UART_IMR_DELTA_CTS; + msm_write(port, msm_port->imr, UART_IMR); +} + +static void msm_handle_rx_dm(struct uart_port *port, unsigned int misr) + __must_hold(&port->lock) +{ + struct tty_port *tport = &port->state->port; + unsigned int sr; + int count = 0; + struct msm_port *msm_port = UART_TO_MSM(port); + + if ((msm_read(port, UART_SR) & UART_SR_OVERRUN)) { + port->icount.overrun++; + tty_insert_flip_char(tport, 0, TTY_OVERRUN); + msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR); + } + + if (misr & UART_IMR_RXSTALE) { + count = msm_read(port, UARTDM_RX_TOTAL_SNAP) - + msm_port->old_snap_state; + msm_port->old_snap_state = 0; + } else { + count = 4 * (msm_read(port, UART_RFWR)); + msm_port->old_snap_state += count; + } + + /* TODO: Precise error reporting */ + + port->icount.rx += count; + + while (count > 0) { + unsigned char buf[4]; + int sysrq, r_count, i; + + sr = msm_read(port, UART_SR); + if ((sr & UART_SR_RX_READY) == 0) { + msm_port->old_snap_state -= count; + break; + } + + ioread32_rep(port->membase + UARTDM_RF, buf, 1); + r_count = min_t(int, count, sizeof(buf)); + + for (i = 0; i < r_count; i++) { + char flag = TTY_NORMAL; + + if (msm_port->break_detected && buf[i] == 0) { + port->icount.brk++; + flag = TTY_BREAK; + msm_port->break_detected = false; + if (uart_handle_break(port)) + continue; + } + + if (!(port->read_status_mask & UART_SR_RX_BREAK)) + flag = TTY_NORMAL; + + spin_unlock(&port->lock); + sysrq = uart_handle_sysrq_char(port, buf[i]); + spin_lock(&port->lock); + if (!sysrq) + tty_insert_flip_char(tport, buf[i], flag); + } + count -= r_count; + } + + spin_unlock(&port->lock); + tty_flip_buffer_push(tport); + spin_lock(&port->lock); + + if (misr & (UART_IMR_RXSTALE)) + msm_write(port, UART_CR_CMD_RESET_STALE_INT, UART_CR); + msm_write(port, 0xFFFFFF, UARTDM_DMRX); + msm_write(port, UART_CR_CMD_STALE_EVENT_ENABLE, UART_CR); + + /* Try to use DMA */ + msm_start_rx_dma(msm_port); +} + +static void msm_handle_rx(struct uart_port *port) + __must_hold(&port->lock) +{ + struct tty_port *tport = &port->state->port; + unsigned int sr; + + /* + * Handle overrun. My understanding of the hardware is that overrun + * is not tied to the RX buffer, so we handle the case out of band. + */ + if ((msm_read(port, UART_SR) & UART_SR_OVERRUN)) { + port->icount.overrun++; + tty_insert_flip_char(tport, 0, TTY_OVERRUN); + msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR); + } + + /* and now the main RX loop */ + while ((sr = msm_read(port, UART_SR)) & UART_SR_RX_READY) { + unsigned int c; + char flag = TTY_NORMAL; + int sysrq; + + c = msm_read(port, UART_RF); + + if (sr & UART_SR_RX_BREAK) { + port->icount.brk++; + if (uart_handle_break(port)) + continue; + } else if (sr & UART_SR_PAR_FRAME_ERR) { + port->icount.frame++; + } else { + port->icount.rx++; + } + + /* Mask conditions we're ignorning. */ + sr &= port->read_status_mask; + + if (sr & UART_SR_RX_BREAK) + flag = TTY_BREAK; + else if (sr & UART_SR_PAR_FRAME_ERR) + flag = TTY_FRAME; + + spin_unlock(&port->lock); + sysrq = uart_handle_sysrq_char(port, c); + spin_lock(&port->lock); + if (!sysrq) + tty_insert_flip_char(tport, c, flag); + } + + spin_unlock(&port->lock); + tty_flip_buffer_push(tport); + spin_lock(&port->lock); +} + +static void msm_handle_tx_pio(struct uart_port *port, unsigned int tx_count) +{ + struct circ_buf *xmit = &port->state->xmit; + struct msm_port *msm_port = UART_TO_MSM(port); + unsigned int num_chars; + unsigned int tf_pointer = 0; + void __iomem *tf; + + if (msm_port->is_uartdm) + tf = port->membase + UARTDM_TF; + else + tf = port->membase + UART_TF; + + if (tx_count && msm_port->is_uartdm) + msm_reset_dm_count(port, tx_count); + + while (tf_pointer < tx_count) { + int i; + char buf[4] = { 0 }; + + if (!(msm_read(port, UART_SR) & UART_SR_TX_READY)) + break; + + if (msm_port->is_uartdm) + num_chars = min(tx_count - tf_pointer, + (unsigned int)sizeof(buf)); + else + num_chars = 1; + + for (i = 0; i < num_chars; i++) { + buf[i] = xmit->buf[xmit->tail + i]; + port->icount.tx++; + } + + iowrite32_rep(tf, buf, 1); + xmit->tail = (xmit->tail + num_chars) & (UART_XMIT_SIZE - 1); + tf_pointer += num_chars; + } + + /* disable tx interrupts if nothing more to send */ + if (uart_circ_empty(xmit)) + msm_stop_tx(port); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); +} + +static void msm_handle_tx(struct uart_port *port) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + struct circ_buf *xmit = &msm_port->uart.state->xmit; + struct msm_dma *dma = &msm_port->tx_dma; + unsigned int pio_count, dma_count, dma_min; + char buf[4] = { 0 }; + void __iomem *tf; + int err = 0; + + if (port->x_char) { + if (msm_port->is_uartdm) + tf = port->membase + UARTDM_TF; + else + tf = port->membase + UART_TF; + + buf[0] = port->x_char; + + if (msm_port->is_uartdm) + msm_reset_dm_count(port, 1); + + iowrite32_rep(tf, buf, 1); + port->icount.tx++; + port->x_char = 0; + return; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + msm_stop_tx(port); + return; + } + + pio_count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); + dma_count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); + + dma_min = 1; /* Always DMA */ + if (msm_port->is_uartdm > UARTDM_1P3) { + dma_count = UARTDM_TX_AIGN(dma_count); + dma_min = UARTDM_BURST_SIZE; + } else { + if (dma_count > UARTDM_TX_MAX) + dma_count = UARTDM_TX_MAX; + } + + if (pio_count > port->fifosize) + pio_count = port->fifosize; + + if (!dma->chan || dma_count < dma_min) + msm_handle_tx_pio(port, pio_count); + else + err = msm_handle_tx_dma(msm_port, dma_count); + + if (err) /* fall back to PIO mode */ + msm_handle_tx_pio(port, pio_count); +} + +static void msm_handle_delta_cts(struct uart_port *port) +{ + msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR); + port->icount.cts++; + wake_up_interruptible(&port->state->port.delta_msr_wait); +} + +static irqreturn_t msm_uart_irq(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + struct msm_port *msm_port = UART_TO_MSM(port); + struct msm_dma *dma = &msm_port->rx_dma; + unsigned long flags; + unsigned int misr; + u32 val; + + spin_lock_irqsave(&port->lock, flags); + misr = msm_read(port, UART_MISR); + msm_write(port, 0, UART_IMR); /* disable interrupt */ + + if (misr & UART_IMR_RXBREAK_START) { + msm_port->break_detected = true; + msm_write(port, UART_CR_CMD_RESET_RXBREAK_START, UART_CR); + } + + if (misr & (UART_IMR_RXLEV | UART_IMR_RXSTALE)) { + if (dma->count) { + val = UART_CR_CMD_STALE_EVENT_DISABLE; + msm_write(port, val, UART_CR); + val = UART_CR_CMD_RESET_STALE_INT; + msm_write(port, val, UART_CR); + /* + * Flush DMA input fifo to memory, this will also + * trigger DMA RX completion + */ + dmaengine_terminate_all(dma->chan); + } else if (msm_port->is_uartdm) { + msm_handle_rx_dm(port, misr); + } else { + msm_handle_rx(port); + } + } + if (misr & UART_IMR_TXLEV) + msm_handle_tx(port); + if (misr & UART_IMR_DELTA_CTS) + msm_handle_delta_cts(port); + + msm_write(port, msm_port->imr, UART_IMR); /* restore interrupt */ + spin_unlock_irqrestore(&port->lock, flags); + + return IRQ_HANDLED; +} + +static unsigned int msm_tx_empty(struct uart_port *port) +{ + return (msm_read(port, UART_SR) & UART_SR_TX_EMPTY) ? TIOCSER_TEMT : 0; +} + +static unsigned int msm_get_mctrl(struct uart_port *port) +{ + return TIOCM_CAR | TIOCM_CTS | TIOCM_DSR | TIOCM_RTS; +} + +static void msm_reset(struct uart_port *port) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + unsigned int mr; + + /* reset everything */ + msm_write(port, UART_CR_CMD_RESET_RX, UART_CR); + msm_write(port, UART_CR_CMD_RESET_TX, UART_CR); + msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR); + msm_write(port, UART_CR_CMD_RESET_BREAK_INT, UART_CR); + msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR); + msm_write(port, UART_CR_CMD_RESET_RFR, UART_CR); + mr = msm_read(port, UART_MR1); + mr &= ~UART_MR1_RX_RDY_CTL; + msm_write(port, mr, UART_MR1); + + /* Disable DM modes */ + if (msm_port->is_uartdm) + msm_write(port, 0, UARTDM_DMEN); +} + +static void msm_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + unsigned int mr; + + mr = msm_read(port, UART_MR1); + + if (!(mctrl & TIOCM_RTS)) { + mr &= ~UART_MR1_RX_RDY_CTL; + msm_write(port, mr, UART_MR1); + msm_write(port, UART_CR_CMD_RESET_RFR, UART_CR); + } else { + mr |= UART_MR1_RX_RDY_CTL; + msm_write(port, mr, UART_MR1); + } +} + +static void msm_break_ctl(struct uart_port *port, int break_ctl) +{ + if (break_ctl) + msm_write(port, UART_CR_CMD_START_BREAK, UART_CR); + else + msm_write(port, UART_CR_CMD_STOP_BREAK, UART_CR); +} + +struct msm_baud_map { + u16 divisor; + u8 code; + u8 rxstale; +}; + +static const struct msm_baud_map * +msm_find_best_baud(struct uart_port *port, unsigned int baud, + unsigned long *rate) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + unsigned int divisor, result; + unsigned long target, old, best_rate = 0, diff, best_diff = ULONG_MAX; + const struct msm_baud_map *entry, *end, *best; + static const struct msm_baud_map table[] = { + { 1, 0xff, 31 }, + { 2, 0xee, 16 }, + { 3, 0xdd, 8 }, + { 4, 0xcc, 6 }, + { 6, 0xbb, 6 }, + { 8, 0xaa, 6 }, + { 12, 0x99, 6 }, + { 16, 0x88, 1 }, + { 24, 0x77, 1 }, + { 32, 0x66, 1 }, + { 48, 0x55, 1 }, + { 96, 0x44, 1 }, + { 192, 0x33, 1 }, + { 384, 0x22, 1 }, + { 768, 0x11, 1 }, + { 1536, 0x00, 1 }, + }; + + best = table; /* Default to smallest divider */ + target = clk_round_rate(msm_port->clk, 16 * baud); + divisor = DIV_ROUND_CLOSEST(target, 16 * baud); + + end = table + ARRAY_SIZE(table); + entry = table; + while (entry < end) { + if (entry->divisor <= divisor) { + result = target / entry->divisor / 16; + diff = abs(result - baud); + + /* Keep track of best entry */ + if (diff < best_diff) { + best_diff = diff; + best = entry; + best_rate = target; + } + + if (result == baud) + break; + } else if (entry->divisor > divisor) { + old = target; + target = clk_round_rate(msm_port->clk, old + 1); + /* + * The rate didn't get any faster so we can't do + * better at dividing it down + */ + if (target == old) + break; + + /* Start the divisor search over at this new rate */ + entry = table; + divisor = DIV_ROUND_CLOSEST(target, 16 * baud); + continue; + } + entry++; + } + + *rate = best_rate; + return best; +} + +static int msm_set_baud_rate(struct uart_port *port, unsigned int baud, + unsigned long *saved_flags) +{ + unsigned int rxstale, watermark, mask; + struct msm_port *msm_port = UART_TO_MSM(port); + const struct msm_baud_map *entry; + unsigned long flags, rate; + + flags = *saved_flags; + spin_unlock_irqrestore(&port->lock, flags); + + entry = msm_find_best_baud(port, baud, &rate); + clk_set_rate(msm_port->clk, rate); + baud = rate / 16 / entry->divisor; + + spin_lock_irqsave(&port->lock, flags); + *saved_flags = flags; + port->uartclk = rate; + + msm_write(port, entry->code, UART_CSR); + + /* RX stale watermark */ + rxstale = entry->rxstale; + watermark = UART_IPR_STALE_LSB & rxstale; + if (msm_port->is_uartdm) { + mask = UART_DM_IPR_STALE_TIMEOUT_MSB; + } else { + watermark |= UART_IPR_RXSTALE_LAST; + mask = UART_IPR_STALE_TIMEOUT_MSB; + } + + watermark |= mask & (rxstale << 2); + + msm_write(port, watermark, UART_IPR); + + /* set RX watermark */ + watermark = (port->fifosize * 3) / 4; + msm_write(port, watermark, UART_RFWR); + + /* set TX watermark */ + msm_write(port, 10, UART_TFWR); + + msm_write(port, UART_CR_CMD_PROTECTION_EN, UART_CR); + msm_reset(port); + + /* Enable RX and TX */ + msm_write(port, UART_CR_TX_ENABLE | UART_CR_RX_ENABLE, UART_CR); + + /* turn on RX and CTS interrupts */ + msm_port->imr = UART_IMR_RXLEV | UART_IMR_RXSTALE | + UART_IMR_CURRENT_CTS | UART_IMR_RXBREAK_START; + + msm_write(port, msm_port->imr, UART_IMR); + + if (msm_port->is_uartdm) { + msm_write(port, UART_CR_CMD_RESET_STALE_INT, UART_CR); + msm_write(port, 0xFFFFFF, UARTDM_DMRX); + msm_write(port, UART_CR_CMD_STALE_EVENT_ENABLE, UART_CR); + } + + return baud; +} + +static void msm_init_clock(struct uart_port *port) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + + clk_prepare_enable(msm_port->clk); + clk_prepare_enable(msm_port->pclk); + msm_serial_set_mnd_regs(port); +} + +static int msm_startup(struct uart_port *port) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + unsigned int data, rfr_level, mask; + int ret; + + snprintf(msm_port->name, sizeof(msm_port->name), + "msm_serial%d", port->line); + + msm_init_clock(port); + + if (likely(port->fifosize > 12)) + rfr_level = port->fifosize - 12; + else + rfr_level = port->fifosize; + + /* set automatic RFR level */ + data = msm_read(port, UART_MR1); + + if (msm_port->is_uartdm) + mask = UART_DM_MR1_AUTO_RFR_LEVEL1; + else + mask = UART_MR1_AUTO_RFR_LEVEL1; + + data &= ~mask; + data &= ~UART_MR1_AUTO_RFR_LEVEL0; + data |= mask & (rfr_level << 2); + data |= UART_MR1_AUTO_RFR_LEVEL0 & rfr_level; + msm_write(port, data, UART_MR1); + + if (msm_port->is_uartdm) { + msm_request_tx_dma(msm_port, msm_port->uart.mapbase); + msm_request_rx_dma(msm_port, msm_port->uart.mapbase); + } + + ret = request_irq(port->irq, msm_uart_irq, IRQF_TRIGGER_HIGH, + msm_port->name, port); + if (unlikely(ret)) + goto err_irq; + + return 0; + +err_irq: + if (msm_port->is_uartdm) + msm_release_dma(msm_port); + + clk_disable_unprepare(msm_port->pclk); + clk_disable_unprepare(msm_port->clk); + + return ret; +} + +static void msm_shutdown(struct uart_port *port) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + + msm_port->imr = 0; + msm_write(port, 0, UART_IMR); /* disable interrupts */ + + if (msm_port->is_uartdm) + msm_release_dma(msm_port); + + clk_disable_unprepare(msm_port->clk); + + free_irq(port->irq, port); +} + +static void msm_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + struct msm_dma *dma = &msm_port->rx_dma; + unsigned long flags; + unsigned int baud, mr; + + spin_lock_irqsave(&port->lock, flags); + + if (dma->chan) /* Terminate if any */ + msm_stop_dma(port, dma); + + /* calculate and set baud rate */ + baud = uart_get_baud_rate(port, termios, old, 300, 4000000); + baud = msm_set_baud_rate(port, baud, &flags); + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, baud, baud); + + /* calculate parity */ + mr = msm_read(port, UART_MR2); + mr &= ~UART_MR2_PARITY_MODE; + if (termios->c_cflag & PARENB) { + if (termios->c_cflag & PARODD) + mr |= UART_MR2_PARITY_MODE_ODD; + else if (termios->c_cflag & CMSPAR) + mr |= UART_MR2_PARITY_MODE_SPACE; + else + mr |= UART_MR2_PARITY_MODE_EVEN; + } + + /* calculate bits per char */ + mr &= ~UART_MR2_BITS_PER_CHAR; + switch (termios->c_cflag & CSIZE) { + case CS5: + mr |= UART_MR2_BITS_PER_CHAR_5; + break; + case CS6: + mr |= UART_MR2_BITS_PER_CHAR_6; + break; + case CS7: + mr |= UART_MR2_BITS_PER_CHAR_7; + break; + case CS8: + default: + mr |= UART_MR2_BITS_PER_CHAR_8; + break; + } + + /* calculate stop bits */ + mr &= ~(UART_MR2_STOP_BIT_LEN_ONE | UART_MR2_STOP_BIT_LEN_TWO); + if (termios->c_cflag & CSTOPB) + mr |= UART_MR2_STOP_BIT_LEN_TWO; + else + mr |= UART_MR2_STOP_BIT_LEN_ONE; + + /* set parity, bits per char, and stop bit */ + msm_write(port, mr, UART_MR2); + + /* calculate and set hardware flow control */ + mr = msm_read(port, UART_MR1); + mr &= ~(UART_MR1_CTS_CTL | UART_MR1_RX_RDY_CTL); + if (termios->c_cflag & CRTSCTS) { + mr |= UART_MR1_CTS_CTL; + mr |= UART_MR1_RX_RDY_CTL; + } + msm_write(port, mr, UART_MR1); + + /* Configure status bits to ignore based on termio flags. */ + port->read_status_mask = 0; + if (termios->c_iflag & INPCK) + port->read_status_mask |= UART_SR_PAR_FRAME_ERR; + if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) + port->read_status_mask |= UART_SR_RX_BREAK; + + uart_update_timeout(port, termios->c_cflag, baud); + + /* Try to use DMA */ + msm_start_rx_dma(msm_port); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *msm_type(struct uart_port *port) +{ + return "MSM"; +} + +static void msm_release_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + struct resource *uart_resource; + resource_size_t size; + + uart_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (unlikely(!uart_resource)) + return; + size = resource_size(uart_resource); + + release_mem_region(port->mapbase, size); + iounmap(port->membase); + port->membase = NULL; +} + +static int msm_request_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + struct resource *uart_resource; + resource_size_t size; + int ret; + + uart_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (unlikely(!uart_resource)) + return -ENXIO; + + size = resource_size(uart_resource); + + if (!request_mem_region(port->mapbase, size, "msm_serial")) + return -EBUSY; + + port->membase = ioremap(port->mapbase, size); + if (!port->membase) { + ret = -EBUSY; + goto fail_release_port; + } + + return 0; + +fail_release_port: + release_mem_region(port->mapbase, size); + return ret; +} + +static void msm_config_port(struct uart_port *port, int flags) +{ + int ret; + + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_MSM; + ret = msm_request_port(port); + if (ret) + return; + } +} + +static int msm_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + if (unlikely(ser->type != PORT_UNKNOWN && ser->type != PORT_MSM)) + return -EINVAL; + if (unlikely(port->irq != ser->irq)) + return -EINVAL; + return 0; +} + +static void msm_power(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + + switch (state) { + case 0: + clk_prepare_enable(msm_port->clk); + clk_prepare_enable(msm_port->pclk); + break; + case 3: + clk_disable_unprepare(msm_port->clk); + clk_disable_unprepare(msm_port->pclk); + break; + default: + pr_err("msm_serial: Unknown PM state %d\n", state); + } +} + +#ifdef CONFIG_CONSOLE_POLL +static int msm_poll_get_char_single(struct uart_port *port) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + unsigned int rf_reg = msm_port->is_uartdm ? UARTDM_RF : UART_RF; + + if (!(msm_read(port, UART_SR) & UART_SR_RX_READY)) + return NO_POLL_CHAR; + + return msm_read(port, rf_reg) & 0xff; +} + +static int msm_poll_get_char_dm(struct uart_port *port) +{ + int c; + static u32 slop; + static int count; + unsigned char *sp = (unsigned char *)&slop; + + /* Check if a previous read had more than one char */ + if (count) { + c = sp[sizeof(slop) - count]; + count--; + /* Or if FIFO is empty */ + } else if (!(msm_read(port, UART_SR) & UART_SR_RX_READY)) { + /* + * If RX packing buffer has less than a word, force stale to + * push contents into RX FIFO + */ + count = msm_read(port, UARTDM_RXFS); + count = (count >> UARTDM_RXFS_BUF_SHIFT) & UARTDM_RXFS_BUF_MASK; + if (count) { + msm_write(port, UART_CR_CMD_FORCE_STALE, UART_CR); + slop = msm_read(port, UARTDM_RF); + c = sp[0]; + count--; + msm_write(port, UART_CR_CMD_RESET_STALE_INT, UART_CR); + msm_write(port, 0xFFFFFF, UARTDM_DMRX); + msm_write(port, UART_CR_CMD_STALE_EVENT_ENABLE, + UART_CR); + } else { + c = NO_POLL_CHAR; + } + /* FIFO has a word */ + } else { + slop = msm_read(port, UARTDM_RF); + c = sp[0]; + count = sizeof(slop) - 1; + } + + return c; +} + +static int msm_poll_get_char(struct uart_port *port) +{ + u32 imr; + int c; + struct msm_port *msm_port = UART_TO_MSM(port); + + /* Disable all interrupts */ + imr = msm_read(port, UART_IMR); + msm_write(port, 0, UART_IMR); + + if (msm_port->is_uartdm) + c = msm_poll_get_char_dm(port); + else + c = msm_poll_get_char_single(port); + + /* Enable interrupts */ + msm_write(port, imr, UART_IMR); + + return c; +} + +static void msm_poll_put_char(struct uart_port *port, unsigned char c) +{ + u32 imr; + struct msm_port *msm_port = UART_TO_MSM(port); + + /* Disable all interrupts */ + imr = msm_read(port, UART_IMR); + msm_write(port, 0, UART_IMR); + + if (msm_port->is_uartdm) + msm_reset_dm_count(port, 1); + + /* Wait until FIFO is empty */ + while (!(msm_read(port, UART_SR) & UART_SR_TX_READY)) + cpu_relax(); + + /* Write a character */ + msm_write(port, c, msm_port->is_uartdm ? UARTDM_TF : UART_TF); + + /* Wait until FIFO is empty */ + while (!(msm_read(port, UART_SR) & UART_SR_TX_READY)) + cpu_relax(); + + /* Enable interrupts */ + msm_write(port, imr, UART_IMR); +} +#endif + +static struct uart_ops msm_uart_pops = { + .tx_empty = msm_tx_empty, + .set_mctrl = msm_set_mctrl, + .get_mctrl = msm_get_mctrl, + .stop_tx = msm_stop_tx, + .start_tx = msm_start_tx, + .stop_rx = msm_stop_rx, + .enable_ms = msm_enable_ms, + .break_ctl = msm_break_ctl, + .startup = msm_startup, + .shutdown = msm_shutdown, + .set_termios = msm_set_termios, + .type = msm_type, + .release_port = msm_release_port, + .request_port = msm_request_port, + .config_port = msm_config_port, + .verify_port = msm_verify_port, + .pm = msm_power, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = msm_poll_get_char, + .poll_put_char = msm_poll_put_char, +#endif +}; + +static struct msm_port msm_uart_ports[] = { + { + .uart = { + .iotype = UPIO_MEM, + .ops = &msm_uart_pops, + .flags = UPF_BOOT_AUTOCONF, + .fifosize = 64, + .line = 0, + }, + }, + { + .uart = { + .iotype = UPIO_MEM, + .ops = &msm_uart_pops, + .flags = UPF_BOOT_AUTOCONF, + .fifosize = 64, + .line = 1, + }, + }, + { + .uart = { + .iotype = UPIO_MEM, + .ops = &msm_uart_pops, + .flags = UPF_BOOT_AUTOCONF, + .fifosize = 64, + .line = 2, + }, + }, +}; + +#define UART_NR ARRAY_SIZE(msm_uart_ports) + +static inline struct uart_port *msm_get_port_from_line(unsigned int line) +{ + return &msm_uart_ports[line].uart; +} + +#ifdef CONFIG_SERIAL_MSM_CONSOLE +static void __msm_console_write(struct uart_port *port, const char *s, + unsigned int count, bool is_uartdm) +{ + unsigned long flags; + int i; + int num_newlines = 0; + bool replaced = false; + void __iomem *tf; + int locked = 1; + + if (is_uartdm) + tf = port->membase + UARTDM_TF; + else + tf = port->membase + UART_TF; + + /* Account for newlines that will get a carriage return added */ + for (i = 0; i < count; i++) + if (s[i] == '\n') + num_newlines++; + count += num_newlines; + + local_irq_save(flags); + + if (port->sysrq) + locked = 0; + else if (oops_in_progress) + locked = spin_trylock(&port->lock); + else + spin_lock(&port->lock); + + if (is_uartdm) + msm_reset_dm_count(port, count); + + i = 0; + while (i < count) { + int j; + unsigned int num_chars; + char buf[4] = { 0 }; + + if (is_uartdm) + num_chars = min(count - i, (unsigned int)sizeof(buf)); + else + num_chars = 1; + + for (j = 0; j < num_chars; j++) { + char c = *s; + + if (c == '\n' && !replaced) { + buf[j] = '\r'; + j++; + replaced = true; + } + if (j < num_chars) { + buf[j] = c; + s++; + replaced = false; + } + } + + while (!(msm_read(port, UART_SR) & UART_SR_TX_READY)) + cpu_relax(); + + iowrite32_rep(tf, buf, 1); + i += num_chars; + } + + if (locked) + spin_unlock(&port->lock); + + local_irq_restore(flags); +} + +static void msm_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_port *port; + struct msm_port *msm_port; + + BUG_ON(co->index < 0 || co->index >= UART_NR); + + port = msm_get_port_from_line(co->index); + msm_port = UART_TO_MSM(port); + + __msm_console_write(port, s, count, msm_port->is_uartdm); +} + +static int msm_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (unlikely(co->index >= UART_NR || co->index < 0)) + return -ENXIO; + + port = msm_get_port_from_line(co->index); + + if (unlikely(!port->membase)) + return -ENXIO; + + msm_init_clock(port); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + pr_info("msm_serial: console setup on port #%d\n", port->line); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static void +msm_serial_early_write(struct console *con, const char *s, unsigned n) +{ + struct earlycon_device *dev = con->data; + + __msm_console_write(&dev->port, s, n, false); +} + +static int __init +msm_serial_early_console_setup(struct earlycon_device *device, const char *opt) +{ + if (!device->port.membase) + return -ENODEV; + + device->con->write = msm_serial_early_write; + return 0; +} +OF_EARLYCON_DECLARE(msm_serial, "qcom,msm-uart", + msm_serial_early_console_setup); + +static void +msm_serial_early_write_dm(struct console *con, const char *s, unsigned n) +{ + struct earlycon_device *dev = con->data; + + __msm_console_write(&dev->port, s, n, true); +} + +static int __init +msm_serial_early_console_setup_dm(struct earlycon_device *device, + const char *opt) +{ + if (!device->port.membase) + return -ENODEV; + + device->con->write = msm_serial_early_write_dm; + return 0; +} +OF_EARLYCON_DECLARE(msm_serial_dm, "qcom,msm-uartdm", + msm_serial_early_console_setup_dm); + +static struct uart_driver msm_uart_driver; + +static struct console msm_console = { + .name = "ttyMSM", + .write = msm_console_write, + .device = uart_console_device, + .setup = msm_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &msm_uart_driver, +}; + +#define MSM_CONSOLE (&msm_console) + +#else +#define MSM_CONSOLE NULL +#endif + +static struct uart_driver msm_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "msm_serial", + .dev_name = "ttyMSM", + .nr = UART_NR, + .cons = MSM_CONSOLE, +}; + +static atomic_t msm_uart_next_id = ATOMIC_INIT(0); + +static const struct of_device_id msm_uartdm_table[] = { + { .compatible = "qcom,msm-uartdm-v1.1", .data = (void *)UARTDM_1P1 }, + { .compatible = "qcom,msm-uartdm-v1.2", .data = (void *)UARTDM_1P2 }, + { .compatible = "qcom,msm-uartdm-v1.3", .data = (void *)UARTDM_1P3 }, + { .compatible = "qcom,msm-uartdm-v1.4", .data = (void *)UARTDM_1P4 }, + { } +}; + +static int msm_serial_probe(struct platform_device *pdev) +{ + struct msm_port *msm_port; + struct resource *resource; + struct uart_port *port; + const struct of_device_id *id; + int irq, line; + + if (pdev->dev.of_node) + line = of_alias_get_id(pdev->dev.of_node, "serial"); + else + line = pdev->id; + + if (line < 0) + line = atomic_inc_return(&msm_uart_next_id) - 1; + + if (unlikely(line < 0 || line >= UART_NR)) + return -ENXIO; + + dev_info(&pdev->dev, "msm_serial: detected port #%d\n", line); + + port = msm_get_port_from_line(line); + port->dev = &pdev->dev; + msm_port = UART_TO_MSM(port); + + id = of_match_device(msm_uartdm_table, &pdev->dev); + if (id) + msm_port->is_uartdm = (unsigned long)id->data; + else + msm_port->is_uartdm = 0; + + msm_port->clk = devm_clk_get(&pdev->dev, "core"); + if (IS_ERR(msm_port->clk)) + return PTR_ERR(msm_port->clk); + + if (msm_port->is_uartdm) { + msm_port->pclk = devm_clk_get(&pdev->dev, "iface"); + if (IS_ERR(msm_port->pclk)) + return PTR_ERR(msm_port->pclk); + } + + port->uartclk = clk_get_rate(msm_port->clk); + dev_info(&pdev->dev, "uartclk = %d\n", port->uartclk); + + resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (unlikely(!resource)) + return -ENXIO; + port->mapbase = resource->start; + + irq = platform_get_irq(pdev, 0); + if (unlikely(irq < 0)) + return -ENXIO; + port->irq = irq; + port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_MSM_CONSOLE); + + platform_set_drvdata(pdev, port); + + return uart_add_one_port(&msm_uart_driver, port); +} + +static int msm_serial_remove(struct platform_device *pdev) +{ + struct uart_port *port = platform_get_drvdata(pdev); + + uart_remove_one_port(&msm_uart_driver, port); + + return 0; +} + +static const struct of_device_id msm_match_table[] = { + { .compatible = "qcom,msm-uart" }, + { .compatible = "qcom,msm-uartdm" }, + {} +}; +MODULE_DEVICE_TABLE(of, msm_match_table); + +static int __maybe_unused msm_serial_suspend(struct device *dev) +{ + struct msm_port *port = dev_get_drvdata(dev); + + uart_suspend_port(&msm_uart_driver, &port->uart); + + return 0; +} + +static int __maybe_unused msm_serial_resume(struct device *dev) +{ + struct msm_port *port = dev_get_drvdata(dev); + + uart_resume_port(&msm_uart_driver, &port->uart); + + return 0; +} + +static const struct dev_pm_ops msm_serial_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(msm_serial_suspend, msm_serial_resume) +}; + +static struct platform_driver msm_platform_driver = { + .remove = msm_serial_remove, + .probe = msm_serial_probe, + .driver = { + .name = "msm_serial", + .pm = &msm_serial_dev_pm_ops, + .of_match_table = msm_match_table, + }, +}; + +static int __init msm_serial_init(void) +{ + int ret; + + ret = uart_register_driver(&msm_uart_driver); + if (unlikely(ret)) + return ret; + + ret = platform_driver_register(&msm_platform_driver); + if (unlikely(ret)) + uart_unregister_driver(&msm_uart_driver); + + pr_info("msm_serial: driver initialized\n"); + + return ret; +} + +static void __exit msm_serial_exit(void) +{ + platform_driver_unregister(&msm_platform_driver); + uart_unregister_driver(&msm_uart_driver); +} + +module_init(msm_serial_init); +module_exit(msm_serial_exit); + +MODULE_AUTHOR("Robert Love "); +MODULE_DESCRIPTION("Driver for msm7x serial device"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/mux.c b/drivers/tty/serial/mux.c new file mode 100644 index 000000000..47ab280f5 --- /dev/null +++ b/drivers/tty/serial/mux.c @@ -0,0 +1,609 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +** mux.c: +** serial driver for the Mux console found in some PA-RISC servers. +** +** (c) Copyright 2002 Ryan Bradetich +** (c) Copyright 2002 Hewlett-Packard Company +** +** This Driver currently only supports the console (port 0) on the MUX. +** Additional work will be needed on this driver to enable the full +** functionality of the MUX. +** +*/ + +#include +#include +#include +#include +#include +#include +#include +#include /* for udelay */ +#include +#include +#include +#include + +#include +#include + +#define MUX_OFFSET 0x800 +#define MUX_LINE_OFFSET 0x80 + +#define MUX_FIFO_SIZE 255 +#define MUX_POLL_DELAY (30 * HZ / 1000) + +#define IO_DATA_REG_OFFSET 0x3c +#define IO_DCOUNT_REG_OFFSET 0x40 + +#define MUX_EOFIFO(status) ((status & 0xF000) == 0xF000) +#define MUX_STATUS(status) ((status & 0xF000) == 0x8000) +#define MUX_BREAK(status) ((status & 0xF000) == 0x2000) + +#define MUX_NR 256 +static unsigned int port_cnt __read_mostly; +struct mux_port { + struct uart_port port; + int enabled; +}; +static struct mux_port mux_ports[MUX_NR]; + +static struct uart_driver mux_driver = { + .owner = THIS_MODULE, + .driver_name = "ttyB", + .dev_name = "ttyB", + .major = MUX_MAJOR, + .minor = 0, + .nr = MUX_NR, +}; + +static struct timer_list mux_timer; + +#define UART_PUT_CHAR(p, c) __raw_writel((c), (p)->membase + IO_DATA_REG_OFFSET) +#define UART_GET_FIFO_CNT(p) __raw_readl((p)->membase + IO_DCOUNT_REG_OFFSET) + +/** + * get_mux_port_count - Get the number of available ports on the Mux. + * @dev: The parisc device. + * + * This function is used to determine the number of ports the Mux + * supports. The IODC data reports the number of ports the Mux + * can support, but there are cases where not all the Mux ports + * are connected. This function can override the IODC and + * return the true port count. + */ +static int __init get_mux_port_count(struct parisc_device *dev) +{ + int status; + u8 iodc_data[32]; + unsigned long bytecnt; + + /* If this is the built-in Mux for the K-Class (Eole CAP/MUX), + * we only need to allocate resources for 1 port since the + * other 7 ports are not connected. + */ + if(dev->id.hversion == 0x15) + return 1; + + status = pdc_iodc_read(&bytecnt, dev->hpa.start, 0, iodc_data, 32); + BUG_ON(status != PDC_OK); + + /* Return the number of ports specified in the iodc data. */ + return ((((iodc_data)[4] & 0xf0) >> 4) * 8) + 8; +} + +/** + * mux_tx_empty - Check if the transmitter fifo is empty. + * @port: Ptr to the uart_port. + * + * This function test if the transmitter fifo for the port + * described by 'port' is empty. If it is empty, this function + * should return TIOCSER_TEMT, otherwise return 0. + */ +static unsigned int mux_tx_empty(struct uart_port *port) +{ + return UART_GET_FIFO_CNT(port) ? 0 : TIOCSER_TEMT; +} + +/** + * mux_set_mctrl - Set the current state of the modem control inputs. + * @ports: Ptr to the uart_port. + * @mctrl: Modem control bits. + * + * The Serial MUX does not support CTS, DCD or DSR so this function + * is ignored. + */ +static void mux_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} + +/** + * mux_get_mctrl - Returns the current state of modem control inputs. + * @port: Ptr to the uart_port. + * + * The Serial MUX does not support CTS, DCD or DSR so these lines are + * treated as permanently active. + */ +static unsigned int mux_get_mctrl(struct uart_port *port) +{ + return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; +} + +/** + * mux_stop_tx - Stop transmitting characters. + * @port: Ptr to the uart_port. + * + * The Serial MUX does not support this function. + */ +static void mux_stop_tx(struct uart_port *port) +{ +} + +/** + * mux_start_tx - Start transmitting characters. + * @port: Ptr to the uart_port. + * + * The Serial Mux does not support this function. + */ +static void mux_start_tx(struct uart_port *port) +{ +} + +/** + * mux_stop_rx - Stop receiving characters. + * @port: Ptr to the uart_port. + * + * The Serial Mux does not support this function. + */ +static void mux_stop_rx(struct uart_port *port) +{ +} + +/** + * mux_break_ctl - Control the transmitssion of a break signal. + * @port: Ptr to the uart_port. + * @break_state: Raise/Lower the break signal. + * + * The Serial Mux does not support this function. + */ +static void mux_break_ctl(struct uart_port *port, int break_state) +{ +} + +/** + * mux_write - Write chars to the mux fifo. + * @port: Ptr to the uart_port. + * + * This function writes all the data from the uart buffer to + * the mux fifo. + */ +static void mux_write(struct uart_port *port) +{ + int count; + struct circ_buf *xmit = &port->state->xmit; + + if(port->x_char) { + UART_PUT_CHAR(port, port->x_char); + port->icount.tx++; + port->x_char = 0; + return; + } + + if(uart_circ_empty(xmit) || uart_tx_stopped(port)) { + mux_stop_tx(port); + return; + } + + count = (port->fifosize) - UART_GET_FIFO_CNT(port); + do { + UART_PUT_CHAR(port, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if(uart_circ_empty(xmit)) + break; + + } while(--count > 0); + + while(UART_GET_FIFO_CNT(port)) + udelay(1); + + if(uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + mux_stop_tx(port); +} + +/** + * mux_read - Read chars from the mux fifo. + * @port: Ptr to the uart_port. + * + * This reads all available data from the mux's fifo and pushes + * the data to the tty layer. + */ +static void mux_read(struct uart_port *port) +{ + struct tty_port *tport = &port->state->port; + int data; + __u32 start_count = port->icount.rx; + + while(1) { + data = __raw_readl(port->membase + IO_DATA_REG_OFFSET); + + if (MUX_STATUS(data)) + continue; + + if (MUX_EOFIFO(data)) + break; + + port->icount.rx++; + + if (MUX_BREAK(data)) { + port->icount.brk++; + if(uart_handle_break(port)) + continue; + } + + if (uart_handle_sysrq_char(port, data & 0xffu)) + continue; + + tty_insert_flip_char(tport, data & 0xFF, TTY_NORMAL); + } + + if (start_count != port->icount.rx) + tty_flip_buffer_push(tport); +} + +/** + * mux_startup - Initialize the port. + * @port: Ptr to the uart_port. + * + * Grab any resources needed for this port and start the + * mux timer. + */ +static int mux_startup(struct uart_port *port) +{ + mux_ports[port->line].enabled = 1; + return 0; +} + +/** + * mux_shutdown - Disable the port. + * @port: Ptr to the uart_port. + * + * Release any resources needed for the port. + */ +static void mux_shutdown(struct uart_port *port) +{ + mux_ports[port->line].enabled = 0; +} + +/** + * mux_set_termios - Chane port parameters. + * @port: Ptr to the uart_port. + * @termios: new termios settings. + * @old: old termios settings. + * + * The Serial Mux does not support this function. + */ +static void +mux_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ +} + +/** + * mux_type - Describe the port. + * @port: Ptr to the uart_port. + * + * Return a pointer to a string constant describing the + * specified port. + */ +static const char *mux_type(struct uart_port *port) +{ + return "Mux"; +} + +/** + * mux_release_port - Release memory and IO regions. + * @port: Ptr to the uart_port. + * + * Release any memory and IO region resources currently in use by + * the port. + */ +static void mux_release_port(struct uart_port *port) +{ +} + +/** + * mux_request_port - Request memory and IO regions. + * @port: Ptr to the uart_port. + * + * Request any memory and IO region resources required by the port. + * If any fail, no resources should be registered when this function + * returns, and it should return -EBUSY on failure. + */ +static int mux_request_port(struct uart_port *port) +{ + return 0; +} + +/** + * mux_config_port - Perform port autoconfiguration. + * @port: Ptr to the uart_port. + * @type: Bitmask of required configurations. + * + * Perform any autoconfiguration steps for the port. This function is + * called if the UPF_BOOT_AUTOCONF flag is specified for the port. + * [Note: This is required for now because of a bug in the Serial core. + * rmk has already submitted a patch to linus, should be available for + * 2.5.47.] + */ +static void mux_config_port(struct uart_port *port, int type) +{ + port->type = PORT_MUX; +} + +/** + * mux_verify_port - Verify the port information. + * @port: Ptr to the uart_port. + * @ser: Ptr to the serial information. + * + * Verify the new serial port information contained within serinfo is + * suitable for this port type. + */ +static int mux_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + if(port->membase == NULL) + return -EINVAL; + + return 0; +} + +/** + * mux_drv_poll - Mux poll function. + * @unused: Unused variable + * + * This function periodically polls the Serial MUX to check for new data. + */ +static void mux_poll(struct timer_list *unused) +{ + int i; + + for(i = 0; i < port_cnt; ++i) { + if(!mux_ports[i].enabled) + continue; + + mux_read(&mux_ports[i].port); + mux_write(&mux_ports[i].port); + } + + mod_timer(&mux_timer, jiffies + MUX_POLL_DELAY); +} + + +#ifdef CONFIG_SERIAL_MUX_CONSOLE +static void mux_console_write(struct console *co, const char *s, unsigned count) +{ + /* Wait until the FIFO drains. */ + while(UART_GET_FIFO_CNT(&mux_ports[0].port)) + udelay(1); + + while(count--) { + if(*s == '\n') { + UART_PUT_CHAR(&mux_ports[0].port, '\r'); + } + UART_PUT_CHAR(&mux_ports[0].port, *s++); + } + +} + +static int mux_console_setup(struct console *co, char *options) +{ + return 0; +} + +static struct console mux_console = { + .name = "ttyB", + .write = mux_console_write, + .device = uart_console_device, + .setup = mux_console_setup, + .flags = CON_ENABLED | CON_PRINTBUFFER, + .index = 0, + .data = &mux_driver, +}; + +#define MUX_CONSOLE &mux_console +#else +#define MUX_CONSOLE NULL +#endif + +static const struct uart_ops mux_pops = { + .tx_empty = mux_tx_empty, + .set_mctrl = mux_set_mctrl, + .get_mctrl = mux_get_mctrl, + .stop_tx = mux_stop_tx, + .start_tx = mux_start_tx, + .stop_rx = mux_stop_rx, + .break_ctl = mux_break_ctl, + .startup = mux_startup, + .shutdown = mux_shutdown, + .set_termios = mux_set_termios, + .type = mux_type, + .release_port = mux_release_port, + .request_port = mux_request_port, + .config_port = mux_config_port, + .verify_port = mux_verify_port, +}; + +/** + * mux_probe - Determine if the Serial Mux should claim this device. + * @dev: The parisc device. + * + * Deterimine if the Serial Mux should claim this chip (return 0) + * or not (return 1). + */ +static int __init mux_probe(struct parisc_device *dev) +{ + int i, status; + + int port_count = get_mux_port_count(dev); + printk(KERN_INFO "Serial mux driver (%d ports) Revision: 0.6\n", port_count); + + dev_set_drvdata(&dev->dev, (void *)(long)port_count); + request_mem_region(dev->hpa.start + MUX_OFFSET, + port_count * MUX_LINE_OFFSET, "Mux"); + + if(!port_cnt) { + mux_driver.cons = MUX_CONSOLE; + + status = uart_register_driver(&mux_driver); + if(status) { + printk(KERN_ERR "Serial mux: Unable to register driver.\n"); + return 1; + } + } + + for(i = 0; i < port_count; ++i, ++port_cnt) { + struct uart_port *port = &mux_ports[port_cnt].port; + port->iobase = 0; + port->mapbase = dev->hpa.start + MUX_OFFSET + + (i * MUX_LINE_OFFSET); + port->membase = ioremap(port->mapbase, MUX_LINE_OFFSET); + port->iotype = UPIO_MEM; + port->type = PORT_MUX; + port->irq = 0; + port->uartclk = 0; + port->fifosize = MUX_FIFO_SIZE; + port->ops = &mux_pops; + port->flags = UPF_BOOT_AUTOCONF; + port->line = port_cnt; + port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_MUX_CONSOLE); + + /* The port->timeout needs to match what is present in + * uart_wait_until_sent in serial_core.c. Otherwise + * the time spent in msleep_interruptable will be very + * long, causing the appearance of a console hang. + */ + port->timeout = HZ / 50; + spin_lock_init(&port->lock); + + status = uart_add_one_port(&mux_driver, port); + BUG_ON(status); + } + + return 0; +} + +static int __exit mux_remove(struct parisc_device *dev) +{ + int i, j; + int port_count = (long)dev_get_drvdata(&dev->dev); + + /* Find Port 0 for this card in the mux_ports list. */ + for(i = 0; i < port_cnt; ++i) { + if(mux_ports[i].port.mapbase == dev->hpa.start + MUX_OFFSET) + break; + } + BUG_ON(i + port_count > port_cnt); + + /* Release the resources associated with each port on the device. */ + for(j = 0; j < port_count; ++j, ++i) { + struct uart_port *port = &mux_ports[i].port; + + uart_remove_one_port(&mux_driver, port); + if(port->membase) + iounmap(port->membase); + } + + release_mem_region(dev->hpa.start + MUX_OFFSET, port_count * MUX_LINE_OFFSET); + return 0; +} + +/* Hack. This idea was taken from the 8250_gsc.c on how to properly order + * the serial port detection in the proper order. The idea is we always + * want the builtin mux to be detected before addin mux cards, so we + * specifically probe for the builtin mux cards first. + * + * This table only contains the parisc_device_id of known builtin mux + * devices. All other mux cards will be detected by the generic mux_tbl. + */ +static const struct parisc_device_id builtin_mux_tbl[] __initconst = { + { HPHW_A_DIRECT, HVERSION_REV_ANY_ID, 0x15, 0x0000D }, /* All K-class */ + { HPHW_A_DIRECT, HVERSION_REV_ANY_ID, 0x44, 0x0000D }, /* E35, E45, and E55 */ + { 0, } +}; + +static const struct parisc_device_id mux_tbl[] __initconst = { + { HPHW_A_DIRECT, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0000D }, + { 0, } +}; + +MODULE_DEVICE_TABLE(parisc, builtin_mux_tbl); +MODULE_DEVICE_TABLE(parisc, mux_tbl); + +static struct parisc_driver builtin_serial_mux_driver __refdata = { + .name = "builtin_serial_mux", + .id_table = builtin_mux_tbl, + .probe = mux_probe, + .remove = __exit_p(mux_remove), +}; + +static struct parisc_driver serial_mux_driver __refdata = { + .name = "serial_mux", + .id_table = mux_tbl, + .probe = mux_probe, + .remove = __exit_p(mux_remove), +}; + +/** + * mux_init - Serial MUX initialization procedure. + * + * Register the Serial MUX driver. + */ +static int __init mux_init(void) +{ + register_parisc_driver(&builtin_serial_mux_driver); + register_parisc_driver(&serial_mux_driver); + + if(port_cnt > 0) { + /* Start the Mux timer */ + timer_setup(&mux_timer, mux_poll, 0); + mod_timer(&mux_timer, jiffies + MUX_POLL_DELAY); + +#ifdef CONFIG_SERIAL_MUX_CONSOLE + register_console(&mux_console); +#endif + } + + return 0; +} + +/** + * mux_exit - Serial MUX cleanup procedure. + * + * Unregister the Serial MUX driver from the tty layer. + */ +static void __exit mux_exit(void) +{ + /* Delete the Mux timer. */ + if(port_cnt > 0) { + del_timer_sync(&mux_timer); +#ifdef CONFIG_SERIAL_MUX_CONSOLE + unregister_console(&mux_console); +#endif + } + + unregister_parisc_driver(&builtin_serial_mux_driver); + unregister_parisc_driver(&serial_mux_driver); + uart_unregister_driver(&mux_driver); +} + +module_init(mux_init); +module_exit(mux_exit); + +MODULE_AUTHOR("Ryan Bradetich"); +MODULE_DESCRIPTION("Serial MUX driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_CHARDEV_MAJOR(MUX_MAJOR); diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c new file mode 100644 index 000000000..bbf1b0b37 --- /dev/null +++ b/drivers/tty/serial/mvebu-uart.c @@ -0,0 +1,1002 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* *************************************************************************** +* Marvell Armada-3700 Serial Driver +* Author: Wilson Ding +* Copyright (C) 2015 Marvell International Ltd. +* *************************************************************************** +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Register Map */ +#define UART_STD_RBR 0x00 +#define UART_EXT_RBR 0x18 + +#define UART_STD_TSH 0x04 +#define UART_EXT_TSH 0x1C + +#define UART_STD_CTRL1 0x08 +#define UART_EXT_CTRL1 0x04 +#define CTRL_SOFT_RST BIT(31) +#define CTRL_TXFIFO_RST BIT(15) +#define CTRL_RXFIFO_RST BIT(14) +#define CTRL_SND_BRK_SEQ BIT(11) +#define CTRL_BRK_DET_INT BIT(3) +#define CTRL_FRM_ERR_INT BIT(2) +#define CTRL_PAR_ERR_INT BIT(1) +#define CTRL_OVR_ERR_INT BIT(0) +#define CTRL_BRK_INT (CTRL_BRK_DET_INT | CTRL_FRM_ERR_INT | \ + CTRL_PAR_ERR_INT | CTRL_OVR_ERR_INT) + +#define UART_STD_CTRL2 UART_STD_CTRL1 +#define UART_EXT_CTRL2 0x20 +#define CTRL_STD_TX_RDY_INT BIT(5) +#define CTRL_EXT_TX_RDY_INT BIT(6) +#define CTRL_STD_RX_RDY_INT BIT(4) +#define CTRL_EXT_RX_RDY_INT BIT(5) + +#define UART_STAT 0x0C +#define STAT_TX_FIFO_EMP BIT(13) +#define STAT_TX_FIFO_FUL BIT(11) +#define STAT_TX_EMP BIT(6) +#define STAT_STD_TX_RDY BIT(5) +#define STAT_EXT_TX_RDY BIT(15) +#define STAT_STD_RX_RDY BIT(4) +#define STAT_EXT_RX_RDY BIT(14) +#define STAT_BRK_DET BIT(3) +#define STAT_FRM_ERR BIT(2) +#define STAT_PAR_ERR BIT(1) +#define STAT_OVR_ERR BIT(0) +#define STAT_BRK_ERR (STAT_BRK_DET | STAT_FRM_ERR \ + | STAT_PAR_ERR | STAT_OVR_ERR) + +#define UART_BRDV 0x10 +#define BRDV_BAUD_MASK 0x3FF + +#define UART_OSAMP 0x14 +#define OSAMP_DEFAULT_DIVISOR 16 +#define OSAMP_DIVISORS_MASK 0x3F3F3F3F + +#define MVEBU_NR_UARTS 2 + +#define MVEBU_UART_TYPE "mvebu-uart" +#define DRIVER_NAME "mvebu_serial" + +enum { + /* Either there is only one summed IRQ... */ + UART_IRQ_SUM = 0, + /* ...or there are two separate IRQ for RX and TX */ + UART_RX_IRQ = 0, + UART_TX_IRQ, + UART_IRQ_COUNT +}; + +/* Diverging register offsets */ +struct uart_regs_layout { + unsigned int rbr; + unsigned int tsh; + unsigned int ctrl; + unsigned int intr; +}; + +/* Diverging flags */ +struct uart_flags { + unsigned int ctrl_tx_rdy_int; + unsigned int ctrl_rx_rdy_int; + unsigned int stat_tx_rdy; + unsigned int stat_rx_rdy; +}; + +/* Driver data, a structure for each UART port */ +struct mvebu_uart_driver_data { + bool is_ext; + struct uart_regs_layout regs; + struct uart_flags flags; +}; + +/* Saved registers during suspend */ +struct mvebu_uart_pm_regs { + unsigned int rbr; + unsigned int tsh; + unsigned int ctrl; + unsigned int intr; + unsigned int stat; + unsigned int brdv; + unsigned int osamp; +}; + +/* MVEBU UART driver structure */ +struct mvebu_uart { + struct uart_port *port; + struct clk *clk; + int irq[UART_IRQ_COUNT]; + unsigned char __iomem *nb; + struct mvebu_uart_driver_data *data; +#if defined(CONFIG_PM) + struct mvebu_uart_pm_regs pm_regs; +#endif /* CONFIG_PM */ +}; + +static struct mvebu_uart *to_mvuart(struct uart_port *port) +{ + return (struct mvebu_uart *)port->private_data; +} + +#define IS_EXTENDED(port) (to_mvuart(port)->data->is_ext) + +#define UART_RBR(port) (to_mvuart(port)->data->regs.rbr) +#define UART_TSH(port) (to_mvuart(port)->data->regs.tsh) +#define UART_CTRL(port) (to_mvuart(port)->data->regs.ctrl) +#define UART_INTR(port) (to_mvuart(port)->data->regs.intr) + +#define CTRL_TX_RDY_INT(port) (to_mvuart(port)->data->flags.ctrl_tx_rdy_int) +#define CTRL_RX_RDY_INT(port) (to_mvuart(port)->data->flags.ctrl_rx_rdy_int) +#define STAT_TX_RDY(port) (to_mvuart(port)->data->flags.stat_tx_rdy) +#define STAT_RX_RDY(port) (to_mvuart(port)->data->flags.stat_rx_rdy) + +static struct uart_port mvebu_uart_ports[MVEBU_NR_UARTS]; + +/* Core UART Driver Operations */ +static unsigned int mvebu_uart_tx_empty(struct uart_port *port) +{ + unsigned long flags; + unsigned int st; + + spin_lock_irqsave(&port->lock, flags); + st = readl(port->membase + UART_STAT); + spin_unlock_irqrestore(&port->lock, flags); + + return (st & STAT_TX_EMP) ? TIOCSER_TEMT : 0; +} + +static unsigned int mvebu_uart_get_mctrl(struct uart_port *port) +{ + return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; +} + +static void mvebu_uart_set_mctrl(struct uart_port *port, + unsigned int mctrl) +{ +/* + * Even if we do not support configuring the modem control lines, this + * function must be proided to the serial core + */ +} + +static void mvebu_uart_stop_tx(struct uart_port *port) +{ + unsigned int ctl = readl(port->membase + UART_INTR(port)); + + ctl &= ~CTRL_TX_RDY_INT(port); + writel(ctl, port->membase + UART_INTR(port)); +} + +static void mvebu_uart_start_tx(struct uart_port *port) +{ + unsigned int ctl; + struct circ_buf *xmit = &port->state->xmit; + + if (IS_EXTENDED(port) && !uart_circ_empty(xmit)) { + writel(xmit->buf[xmit->tail], port->membase + UART_TSH(port)); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + } + + ctl = readl(port->membase + UART_INTR(port)); + ctl |= CTRL_TX_RDY_INT(port); + writel(ctl, port->membase + UART_INTR(port)); +} + +static void mvebu_uart_stop_rx(struct uart_port *port) +{ + unsigned int ctl; + + ctl = readl(port->membase + UART_CTRL(port)); + ctl &= ~CTRL_BRK_INT; + writel(ctl, port->membase + UART_CTRL(port)); + + ctl = readl(port->membase + UART_INTR(port)); + ctl &= ~CTRL_RX_RDY_INT(port); + writel(ctl, port->membase + UART_INTR(port)); +} + +static void mvebu_uart_break_ctl(struct uart_port *port, int brk) +{ + unsigned int ctl; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + ctl = readl(port->membase + UART_CTRL(port)); + if (brk == -1) + ctl |= CTRL_SND_BRK_SEQ; + else + ctl &= ~CTRL_SND_BRK_SEQ; + writel(ctl, port->membase + UART_CTRL(port)); + spin_unlock_irqrestore(&port->lock, flags); +} + +static void mvebu_uart_rx_chars(struct uart_port *port, unsigned int status) +{ + struct tty_port *tport = &port->state->port; + unsigned char ch = 0; + char flag = 0; + int ret; + + do { + if (status & STAT_RX_RDY(port)) { + ch = readl(port->membase + UART_RBR(port)); + ch &= 0xff; + flag = TTY_NORMAL; + port->icount.rx++; + + if (status & STAT_PAR_ERR) + port->icount.parity++; + } + + /* + * For UART2, error bits are not cleared on buffer read. + * This causes interrupt loop and system hang. + */ + if (IS_EXTENDED(port) && (status & STAT_BRK_ERR)) { + ret = readl(port->membase + UART_STAT); + ret |= STAT_BRK_ERR; + writel(ret, port->membase + UART_STAT); + } + + if (status & STAT_BRK_DET) { + port->icount.brk++; + status &= ~(STAT_FRM_ERR | STAT_PAR_ERR); + if (uart_handle_break(port)) + goto ignore_char; + } + + if (status & STAT_OVR_ERR) + port->icount.overrun++; + + if (status & STAT_FRM_ERR) + port->icount.frame++; + + if (uart_handle_sysrq_char(port, ch)) + goto ignore_char; + + if (status & port->ignore_status_mask & STAT_PAR_ERR) + status &= ~STAT_RX_RDY(port); + + status &= port->read_status_mask; + + if (status & STAT_PAR_ERR) + flag = TTY_PARITY; + + status &= ~port->ignore_status_mask; + + if (status & STAT_RX_RDY(port)) + tty_insert_flip_char(tport, ch, flag); + + if (status & STAT_BRK_DET) + tty_insert_flip_char(tport, 0, TTY_BREAK); + + if (status & STAT_FRM_ERR) + tty_insert_flip_char(tport, 0, TTY_FRAME); + + if (status & STAT_OVR_ERR) + tty_insert_flip_char(tport, 0, TTY_OVERRUN); + +ignore_char: + status = readl(port->membase + UART_STAT); + } while (status & (STAT_RX_RDY(port) | STAT_BRK_DET)); + + tty_flip_buffer_push(tport); +} + +static void mvebu_uart_tx_chars(struct uart_port *port, unsigned int status) +{ + struct circ_buf *xmit = &port->state->xmit; + unsigned int count; + unsigned int st; + + if (port->x_char) { + writel(port->x_char, port->membase + UART_TSH(port)); + port->icount.tx++; + port->x_char = 0; + return; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + mvebu_uart_stop_tx(port); + return; + } + + for (count = 0; count < port->fifosize; count++) { + writel(xmit->buf[xmit->tail], port->membase + UART_TSH(port)); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + + if (uart_circ_empty(xmit)) + break; + + st = readl(port->membase + UART_STAT); + if (st & STAT_TX_FIFO_FUL) + break; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + mvebu_uart_stop_tx(port); +} + +static irqreturn_t mvebu_uart_isr(int irq, void *dev_id) +{ + struct uart_port *port = (struct uart_port *)dev_id; + unsigned int st = readl(port->membase + UART_STAT); + + if (st & (STAT_RX_RDY(port) | STAT_OVR_ERR | STAT_FRM_ERR | + STAT_BRK_DET)) + mvebu_uart_rx_chars(port, st); + + if (st & STAT_TX_RDY(port)) + mvebu_uart_tx_chars(port, st); + + return IRQ_HANDLED; +} + +static irqreturn_t mvebu_uart_rx_isr(int irq, void *dev_id) +{ + struct uart_port *port = (struct uart_port *)dev_id; + unsigned int st = readl(port->membase + UART_STAT); + + if (st & (STAT_RX_RDY(port) | STAT_OVR_ERR | STAT_FRM_ERR | + STAT_BRK_DET)) + mvebu_uart_rx_chars(port, st); + + return IRQ_HANDLED; +} + +static irqreturn_t mvebu_uart_tx_isr(int irq, void *dev_id) +{ + struct uart_port *port = (struct uart_port *)dev_id; + unsigned int st = readl(port->membase + UART_STAT); + + if (st & STAT_TX_RDY(port)) + mvebu_uart_tx_chars(port, st); + + return IRQ_HANDLED; +} + +static int mvebu_uart_startup(struct uart_port *port) +{ + struct mvebu_uart *mvuart = to_mvuart(port); + unsigned int ctl; + int ret; + + writel(CTRL_TXFIFO_RST | CTRL_RXFIFO_RST, + port->membase + UART_CTRL(port)); + udelay(1); + + /* Clear the error bits of state register before IRQ request */ + ret = readl(port->membase + UART_STAT); + ret |= STAT_BRK_ERR; + writel(ret, port->membase + UART_STAT); + + writel(CTRL_BRK_INT, port->membase + UART_CTRL(port)); + + ctl = readl(port->membase + UART_INTR(port)); + ctl |= CTRL_RX_RDY_INT(port); + writel(ctl, port->membase + UART_INTR(port)); + + if (!mvuart->irq[UART_TX_IRQ]) { + /* Old bindings with just one interrupt (UART0 only) */ + ret = devm_request_irq(port->dev, mvuart->irq[UART_IRQ_SUM], + mvebu_uart_isr, port->irqflags, + dev_name(port->dev), port); + if (ret) { + dev_err(port->dev, "unable to request IRQ %d\n", + mvuart->irq[UART_IRQ_SUM]); + return ret; + } + } else { + /* New bindings with an IRQ for RX and TX (both UART) */ + ret = devm_request_irq(port->dev, mvuart->irq[UART_RX_IRQ], + mvebu_uart_rx_isr, port->irqflags, + dev_name(port->dev), port); + if (ret) { + dev_err(port->dev, "unable to request IRQ %d\n", + mvuart->irq[UART_RX_IRQ]); + return ret; + } + + ret = devm_request_irq(port->dev, mvuart->irq[UART_TX_IRQ], + mvebu_uart_tx_isr, port->irqflags, + dev_name(port->dev), + port); + if (ret) { + dev_err(port->dev, "unable to request IRQ %d\n", + mvuart->irq[UART_TX_IRQ]); + devm_free_irq(port->dev, mvuart->irq[UART_RX_IRQ], + port); + return ret; + } + } + + return 0; +} + +static void mvebu_uart_shutdown(struct uart_port *port) +{ + struct mvebu_uart *mvuart = to_mvuart(port); + + writel(0, port->membase + UART_INTR(port)); + + if (!mvuart->irq[UART_TX_IRQ]) { + devm_free_irq(port->dev, mvuart->irq[UART_IRQ_SUM], port); + } else { + devm_free_irq(port->dev, mvuart->irq[UART_RX_IRQ], port); + devm_free_irq(port->dev, mvuart->irq[UART_TX_IRQ], port); + } +} + +static unsigned int mvebu_uart_baud_rate_set(struct uart_port *port, unsigned int baud) +{ + unsigned int d_divisor, m_divisor; + u32 brdv, osamp; + + if (!port->uartclk) + return 0; + + /* + * The baudrate is derived from the UART clock thanks to two divisors: + * > D ("baud generator"): can divide the clock from 2 to 2^10 - 1. + * > M ("fractional divisor"): allows a better accuracy for + * baudrates higher than 230400. + * + * As the derivation of M is rather complicated, the code sticks to its + * default value (x16) when all the prescalers are zeroed, and only + * makes use of D to configure the desired baudrate. + */ + m_divisor = OSAMP_DEFAULT_DIVISOR; + d_divisor = DIV_ROUND_CLOSEST(port->uartclk, baud * m_divisor); + + brdv = readl(port->membase + UART_BRDV); + brdv &= ~BRDV_BAUD_MASK; + brdv |= d_divisor; + writel(brdv, port->membase + UART_BRDV); + + osamp = readl(port->membase + UART_OSAMP); + osamp &= ~OSAMP_DIVISORS_MASK; + writel(osamp, port->membase + UART_OSAMP); + + return DIV_ROUND_CLOSEST(port->uartclk, d_divisor * m_divisor); +} + +static void mvebu_uart_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + unsigned long flags; + unsigned int baud, min_baud, max_baud; + + spin_lock_irqsave(&port->lock, flags); + + port->read_status_mask = STAT_RX_RDY(port) | STAT_OVR_ERR | + STAT_TX_RDY(port) | STAT_TX_FIFO_FUL; + + if (termios->c_iflag & INPCK) + port->read_status_mask |= STAT_FRM_ERR | STAT_PAR_ERR; + + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= + STAT_FRM_ERR | STAT_PAR_ERR | STAT_OVR_ERR; + + if ((termios->c_cflag & CREAD) == 0) + port->ignore_status_mask |= STAT_RX_RDY(port) | STAT_BRK_ERR; + + /* + * Maximal divisor is 1023 * 16 when using default (x16) scheme. + * Maximum achievable frequency with simple baudrate divisor is 230400. + * Since the error per bit frame would be of more than 15%, achieving + * higher frequencies would require to implement the fractional divisor + * feature. + */ + min_baud = DIV_ROUND_UP(port->uartclk, 1023 * 16); + max_baud = 230400; + + baud = uart_get_baud_rate(port, termios, old, min_baud, max_baud); + baud = mvebu_uart_baud_rate_set(port, baud); + + /* In case baudrate cannot be changed, report previous old value */ + if (baud == 0 && old) + baud = tty_termios_baud_rate(old); + + /* Only the following flag changes are supported */ + if (old) { + termios->c_iflag &= INPCK | IGNPAR; + termios->c_iflag |= old->c_iflag & ~(INPCK | IGNPAR); + termios->c_cflag &= CREAD | CBAUD; + termios->c_cflag |= old->c_cflag & ~(CREAD | CBAUD); + termios->c_cflag |= CS8; + } + + if (baud != 0) { + tty_termios_encode_baud_rate(termios, baud, baud); + uart_update_timeout(port, termios->c_cflag, baud); + } + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *mvebu_uart_type(struct uart_port *port) +{ + return MVEBU_UART_TYPE; +} + +static void mvebu_uart_release_port(struct uart_port *port) +{ + /* Nothing to do here */ +} + +static int mvebu_uart_request_port(struct uart_port *port) +{ + return 0; +} + +#ifdef CONFIG_CONSOLE_POLL +static int mvebu_uart_get_poll_char(struct uart_port *port) +{ + unsigned int st = readl(port->membase + UART_STAT); + + if (!(st & STAT_RX_RDY(port))) + return NO_POLL_CHAR; + + return readl(port->membase + UART_RBR(port)); +} + +static void mvebu_uart_put_poll_char(struct uart_port *port, unsigned char c) +{ + unsigned int st; + + for (;;) { + st = readl(port->membase + UART_STAT); + + if (!(st & STAT_TX_FIFO_FUL)) + break; + + udelay(1); + } + + writel(c, port->membase + UART_TSH(port)); +} +#endif + +static const struct uart_ops mvebu_uart_ops = { + .tx_empty = mvebu_uart_tx_empty, + .set_mctrl = mvebu_uart_set_mctrl, + .get_mctrl = mvebu_uart_get_mctrl, + .stop_tx = mvebu_uart_stop_tx, + .start_tx = mvebu_uart_start_tx, + .stop_rx = mvebu_uart_stop_rx, + .break_ctl = mvebu_uart_break_ctl, + .startup = mvebu_uart_startup, + .shutdown = mvebu_uart_shutdown, + .set_termios = mvebu_uart_set_termios, + .type = mvebu_uart_type, + .release_port = mvebu_uart_release_port, + .request_port = mvebu_uart_request_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = mvebu_uart_get_poll_char, + .poll_put_char = mvebu_uart_put_poll_char, +#endif +}; + +/* Console Driver Operations */ + +#ifdef CONFIG_SERIAL_MVEBU_CONSOLE +/* Early Console */ +static void mvebu_uart_putc(struct uart_port *port, int c) +{ + unsigned int st; + + for (;;) { + st = readl(port->membase + UART_STAT); + if (!(st & STAT_TX_FIFO_FUL)) + break; + } + + /* At early stage, DT is not parsed yet, only use UART0 */ + writel(c, port->membase + UART_STD_TSH); + + for (;;) { + st = readl(port->membase + UART_STAT); + if (st & STAT_TX_FIFO_EMP) + break; + } +} + +static void mvebu_uart_putc_early_write(struct console *con, + const char *s, + unsigned n) +{ + struct earlycon_device *dev = con->data; + + uart_console_write(&dev->port, s, n, mvebu_uart_putc); +} + +static int __init +mvebu_uart_early_console_setup(struct earlycon_device *device, + const char *opt) +{ + if (!device->port.membase) + return -ENODEV; + + device->con->write = mvebu_uart_putc_early_write; + + return 0; +} + +EARLYCON_DECLARE(ar3700_uart, mvebu_uart_early_console_setup); +OF_EARLYCON_DECLARE(ar3700_uart, "marvell,armada-3700-uart", + mvebu_uart_early_console_setup); + +static void wait_for_xmitr(struct uart_port *port) +{ + u32 val; + + readl_poll_timeout_atomic(port->membase + UART_STAT, val, + (val & STAT_TX_RDY(port)), 1, 10000); +} + +static void wait_for_xmite(struct uart_port *port) +{ + u32 val; + + readl_poll_timeout_atomic(port->membase + UART_STAT, val, + (val & STAT_TX_EMP), 1, 10000); +} + +static void mvebu_uart_console_putchar(struct uart_port *port, int ch) +{ + wait_for_xmitr(port); + writel(ch, port->membase + UART_TSH(port)); +} + +static void mvebu_uart_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_port *port = &mvebu_uart_ports[co->index]; + unsigned long flags; + unsigned int ier, intr, ctl; + int locked = 1; + + if (oops_in_progress) + locked = spin_trylock_irqsave(&port->lock, flags); + else + spin_lock_irqsave(&port->lock, flags); + + ier = readl(port->membase + UART_CTRL(port)) & CTRL_BRK_INT; + intr = readl(port->membase + UART_INTR(port)) & + (CTRL_RX_RDY_INT(port) | CTRL_TX_RDY_INT(port)); + writel(0, port->membase + UART_CTRL(port)); + writel(0, port->membase + UART_INTR(port)); + + uart_console_write(port, s, count, mvebu_uart_console_putchar); + + wait_for_xmite(port); + + if (ier) + writel(ier, port->membase + UART_CTRL(port)); + + if (intr) { + ctl = intr | readl(port->membase + UART_INTR(port)); + writel(ctl, port->membase + UART_INTR(port)); + } + + if (locked) + spin_unlock_irqrestore(&port->lock, flags); +} + +static int mvebu_uart_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index < 0 || co->index >= MVEBU_NR_UARTS) + return -EINVAL; + + port = &mvebu_uart_ports[co->index]; + + if (!port->mapbase || !port->membase) { + pr_debug("console on ttyMV%i not present\n", co->index); + return -ENODEV; + } + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver mvebu_uart_driver; + +static struct console mvebu_uart_console = { + .name = "ttyMV", + .write = mvebu_uart_console_write, + .device = uart_console_device, + .setup = mvebu_uart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &mvebu_uart_driver, +}; + +static int __init mvebu_uart_console_init(void) +{ + register_console(&mvebu_uart_console); + return 0; +} + +console_initcall(mvebu_uart_console_init); + + +#endif /* CONFIG_SERIAL_MVEBU_CONSOLE */ + +static struct uart_driver mvebu_uart_driver = { + .owner = THIS_MODULE, + .driver_name = DRIVER_NAME, + .dev_name = "ttyMV", + .nr = MVEBU_NR_UARTS, +#ifdef CONFIG_SERIAL_MVEBU_CONSOLE + .cons = &mvebu_uart_console, +#endif +}; + +#if defined(CONFIG_PM) +static int mvebu_uart_suspend(struct device *dev) +{ + struct mvebu_uart *mvuart = dev_get_drvdata(dev); + struct uart_port *port = mvuart->port; + + uart_suspend_port(&mvebu_uart_driver, port); + + mvuart->pm_regs.rbr = readl(port->membase + UART_RBR(port)); + mvuart->pm_regs.tsh = readl(port->membase + UART_TSH(port)); + mvuart->pm_regs.ctrl = readl(port->membase + UART_CTRL(port)); + mvuart->pm_regs.intr = readl(port->membase + UART_INTR(port)); + mvuart->pm_regs.stat = readl(port->membase + UART_STAT); + mvuart->pm_regs.brdv = readl(port->membase + UART_BRDV); + mvuart->pm_regs.osamp = readl(port->membase + UART_OSAMP); + + device_set_wakeup_enable(dev, true); + + return 0; +} + +static int mvebu_uart_resume(struct device *dev) +{ + struct mvebu_uart *mvuart = dev_get_drvdata(dev); + struct uart_port *port = mvuart->port; + + writel(mvuart->pm_regs.rbr, port->membase + UART_RBR(port)); + writel(mvuart->pm_regs.tsh, port->membase + UART_TSH(port)); + writel(mvuart->pm_regs.ctrl, port->membase + UART_CTRL(port)); + writel(mvuart->pm_regs.intr, port->membase + UART_INTR(port)); + writel(mvuart->pm_regs.stat, port->membase + UART_STAT); + writel(mvuart->pm_regs.brdv, port->membase + UART_BRDV); + writel(mvuart->pm_regs.osamp, port->membase + UART_OSAMP); + + uart_resume_port(&mvebu_uart_driver, port); + + return 0; +} + +static const struct dev_pm_ops mvebu_uart_pm_ops = { + .suspend = mvebu_uart_suspend, + .resume = mvebu_uart_resume, +}; +#endif /* CONFIG_PM */ + +static const struct of_device_id mvebu_uart_of_match[]; + +/* Counter to keep track of each UART port id when not using CONFIG_OF */ +static int uart_num_counter; + +static int mvebu_uart_probe(struct platform_device *pdev) +{ + struct resource *reg = platform_get_resource(pdev, IORESOURCE_MEM, 0); + const struct of_device_id *match = of_match_device(mvebu_uart_of_match, + &pdev->dev); + struct uart_port *port; + struct mvebu_uart *mvuart; + int id, irq; + + if (!reg) { + dev_err(&pdev->dev, "no registers defined\n"); + return -EINVAL; + } + + /* Assume that all UART ports have a DT alias or none has */ + id = of_alias_get_id(pdev->dev.of_node, "serial"); + if (!pdev->dev.of_node || id < 0) + pdev->id = uart_num_counter++; + else + pdev->id = id; + + if (pdev->id >= MVEBU_NR_UARTS) { + dev_err(&pdev->dev, "cannot have more than %d UART ports\n", + MVEBU_NR_UARTS); + return -EINVAL; + } + + port = &mvebu_uart_ports[pdev->id]; + + spin_lock_init(&port->lock); + + port->dev = &pdev->dev; + port->type = PORT_MVEBU; + port->ops = &mvebu_uart_ops; + port->regshift = 0; + + port->fifosize = 32; + port->iotype = UPIO_MEM32; + port->flags = UPF_FIXED_PORT; + port->line = pdev->id; + + /* + * IRQ number is not stored in this structure because we may have two of + * them per port (RX and TX). Instead, use the driver UART structure + * array so called ->irq[]. + */ + port->irq = 0; + port->irqflags = 0; + port->mapbase = reg->start; + + port->membase = devm_ioremap_resource(&pdev->dev, reg); + if (IS_ERR(port->membase)) + return PTR_ERR(port->membase); + + mvuart = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_uart), + GFP_KERNEL); + if (!mvuart) + return -ENOMEM; + + /* Get controller data depending on the compatible string */ + mvuart->data = (struct mvebu_uart_driver_data *)match->data; + mvuart->port = port; + + port->private_data = mvuart; + platform_set_drvdata(pdev, mvuart); + + /* Get fixed clock frequency */ + mvuart->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(mvuart->clk)) { + if (PTR_ERR(mvuart->clk) == -EPROBE_DEFER) + return PTR_ERR(mvuart->clk); + + if (IS_EXTENDED(port)) { + dev_err(&pdev->dev, "unable to get UART clock\n"); + return PTR_ERR(mvuart->clk); + } + } else { + if (!clk_prepare_enable(mvuart->clk)) + port->uartclk = clk_get_rate(mvuart->clk); + } + + /* Manage interrupts */ + if (platform_irq_count(pdev) == 1) { + /* Old bindings: no name on the single unamed UART0 IRQ */ + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + mvuart->irq[UART_IRQ_SUM] = irq; + } else { + /* + * New bindings: named interrupts (RX, TX) for both UARTS, + * only make use of uart-rx and uart-tx interrupts, do not use + * uart-sum of UART0 port. + */ + irq = platform_get_irq_byname(pdev, "uart-rx"); + if (irq < 0) + return irq; + + mvuart->irq[UART_RX_IRQ] = irq; + + irq = platform_get_irq_byname(pdev, "uart-tx"); + if (irq < 0) + return irq; + + mvuart->irq[UART_TX_IRQ] = irq; + } + + /* UART Soft Reset*/ + writel(CTRL_SOFT_RST, port->membase + UART_CTRL(port)); + udelay(1); + writel(0, port->membase + UART_CTRL(port)); + + return uart_add_one_port(&mvebu_uart_driver, port); +} + +static struct mvebu_uart_driver_data uart_std_driver_data = { + .is_ext = false, + .regs.rbr = UART_STD_RBR, + .regs.tsh = UART_STD_TSH, + .regs.ctrl = UART_STD_CTRL1, + .regs.intr = UART_STD_CTRL2, + .flags.ctrl_tx_rdy_int = CTRL_STD_TX_RDY_INT, + .flags.ctrl_rx_rdy_int = CTRL_STD_RX_RDY_INT, + .flags.stat_tx_rdy = STAT_STD_TX_RDY, + .flags.stat_rx_rdy = STAT_STD_RX_RDY, +}; + +static struct mvebu_uart_driver_data uart_ext_driver_data = { + .is_ext = true, + .regs.rbr = UART_EXT_RBR, + .regs.tsh = UART_EXT_TSH, + .regs.ctrl = UART_EXT_CTRL1, + .regs.intr = UART_EXT_CTRL2, + .flags.ctrl_tx_rdy_int = CTRL_EXT_TX_RDY_INT, + .flags.ctrl_rx_rdy_int = CTRL_EXT_RX_RDY_INT, + .flags.stat_tx_rdy = STAT_EXT_TX_RDY, + .flags.stat_rx_rdy = STAT_EXT_RX_RDY, +}; + +/* Match table for of_platform binding */ +static const struct of_device_id mvebu_uart_of_match[] = { + { + .compatible = "marvell,armada-3700-uart", + .data = (void *)&uart_std_driver_data, + }, + { + .compatible = "marvell,armada-3700-uart-ext", + .data = (void *)&uart_ext_driver_data, + }, + {} +}; + +static struct platform_driver mvebu_uart_platform_driver = { + .probe = mvebu_uart_probe, + .driver = { + .name = "mvebu-uart", + .of_match_table = of_match_ptr(mvebu_uart_of_match), + .suppress_bind_attrs = true, +#if defined(CONFIG_PM) + .pm = &mvebu_uart_pm_ops, +#endif /* CONFIG_PM */ + }, +}; + +static int __init mvebu_uart_init(void) +{ + int ret; + + ret = uart_register_driver(&mvebu_uart_driver); + if (ret) + return ret; + + ret = platform_driver_register(&mvebu_uart_platform_driver); + if (ret) + uart_unregister_driver(&mvebu_uart_driver); + + return ret; +} +arch_initcall(mvebu_uart_init); diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c new file mode 100644 index 000000000..b784323a6 --- /dev/null +++ b/drivers/tty/serial/mxs-auart.c @@ -0,0 +1,1814 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Application UART driver for: + * Freescale STMP37XX/STMP378X + * Alphascale ASM9260 + * + * Author: dmitry pervushin + * + * Copyright 2014 Oleksij Rempel + * Provide Alphascale ASM9260 support. + * Copyright 2008-2010 Freescale Semiconductor, Inc. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include +#include "serial_mctrl_gpio.h" + +#define MXS_AUART_PORTS 5 +#define MXS_AUART_FIFO_SIZE 16 + +#define SET_REG 0x4 +#define CLR_REG 0x8 +#define TOG_REG 0xc + +#define AUART_CTRL0 0x00000000 +#define AUART_CTRL1 0x00000010 +#define AUART_CTRL2 0x00000020 +#define AUART_LINECTRL 0x00000030 +#define AUART_LINECTRL2 0x00000040 +#define AUART_INTR 0x00000050 +#define AUART_DATA 0x00000060 +#define AUART_STAT 0x00000070 +#define AUART_DEBUG 0x00000080 +#define AUART_VERSION 0x00000090 +#define AUART_AUTOBAUD 0x000000a0 + +#define AUART_CTRL0_SFTRST (1 << 31) +#define AUART_CTRL0_CLKGATE (1 << 30) +#define AUART_CTRL0_RXTO_ENABLE (1 << 27) +#define AUART_CTRL0_RXTIMEOUT(v) (((v) & 0x7ff) << 16) +#define AUART_CTRL0_XFER_COUNT(v) ((v) & 0xffff) + +#define AUART_CTRL1_XFER_COUNT(v) ((v) & 0xffff) + +#define AUART_CTRL2_DMAONERR (1 << 26) +#define AUART_CTRL2_TXDMAE (1 << 25) +#define AUART_CTRL2_RXDMAE (1 << 24) + +#define AUART_CTRL2_CTSEN (1 << 15) +#define AUART_CTRL2_RTSEN (1 << 14) +#define AUART_CTRL2_RTS (1 << 11) +#define AUART_CTRL2_RXE (1 << 9) +#define AUART_CTRL2_TXE (1 << 8) +#define AUART_CTRL2_UARTEN (1 << 0) + +#define AUART_LINECTRL_BAUD_DIV_MAX 0x003fffc0 +#define AUART_LINECTRL_BAUD_DIV_MIN 0x000000ec +#define AUART_LINECTRL_BAUD_DIVINT_SHIFT 16 +#define AUART_LINECTRL_BAUD_DIVINT_MASK 0xffff0000 +#define AUART_LINECTRL_BAUD_DIVINT(v) (((v) & 0xffff) << 16) +#define AUART_LINECTRL_BAUD_DIVFRAC_SHIFT 8 +#define AUART_LINECTRL_BAUD_DIVFRAC_MASK 0x00003f00 +#define AUART_LINECTRL_BAUD_DIVFRAC(v) (((v) & 0x3f) << 8) +#define AUART_LINECTRL_SPS (1 << 7) +#define AUART_LINECTRL_WLEN_MASK 0x00000060 +#define AUART_LINECTRL_WLEN(v) (((v) & 0x3) << 5) +#define AUART_LINECTRL_FEN (1 << 4) +#define AUART_LINECTRL_STP2 (1 << 3) +#define AUART_LINECTRL_EPS (1 << 2) +#define AUART_LINECTRL_PEN (1 << 1) +#define AUART_LINECTRL_BRK (1 << 0) + +#define AUART_INTR_RTIEN (1 << 22) +#define AUART_INTR_TXIEN (1 << 21) +#define AUART_INTR_RXIEN (1 << 20) +#define AUART_INTR_CTSMIEN (1 << 17) +#define AUART_INTR_RTIS (1 << 6) +#define AUART_INTR_TXIS (1 << 5) +#define AUART_INTR_RXIS (1 << 4) +#define AUART_INTR_CTSMIS (1 << 1) + +#define AUART_STAT_BUSY (1 << 29) +#define AUART_STAT_CTS (1 << 28) +#define AUART_STAT_TXFE (1 << 27) +#define AUART_STAT_TXFF (1 << 25) +#define AUART_STAT_RXFE (1 << 24) +#define AUART_STAT_OERR (1 << 19) +#define AUART_STAT_BERR (1 << 18) +#define AUART_STAT_PERR (1 << 17) +#define AUART_STAT_FERR (1 << 16) +#define AUART_STAT_RXCOUNT_MASK 0xffff + +/* + * Start of Alphascale asm9260 defines + * This list contains only differences of existing bits + * between imx2x and asm9260 + */ +#define ASM9260_HW_CTRL0 0x0000 +/* + * RW. Tell the UART to execute the RX DMA Command. The + * UART will clear this bit at the end of receive execution. + */ +#define ASM9260_BM_CTRL0_RXDMA_RUN BIT(28) +/* RW. 0 use FIFO for status register; 1 use DMA */ +#define ASM9260_BM_CTRL0_RXTO_SOURCE_STATUS BIT(25) +/* + * RW. RX TIMEOUT Enable. Valid for FIFO and DMA. + * Warning: If this bit is set to 0, the RX timeout will not affect receive DMA + * operation. If this bit is set to 1, a receive timeout will cause the receive + * DMA logic to terminate by filling the remaining DMA bytes with garbage data. + */ +#define ASM9260_BM_CTRL0_RXTO_ENABLE BIT(24) +/* + * RW. Receive Timeout Counter Value: number of 8-bit-time to wait before + * asserting timeout on the RX input. If the RXFIFO is not empty and the RX + * input is idle, then the watchdog counter will decrement each bit-time. Note + * 7-bit-time is added to the programmed value, so a value of zero will set + * the counter to 7-bit-time, a value of 0x1 gives 15-bit-time and so on. Also + * note that the counter is reloaded at the end of each frame, so if the frame + * is 10 bits long and the timeout counter value is zero, then timeout will + * occur (when FIFO is not empty) even if the RX input is not idle. The default + * value is 0x3 (31 bit-time). + */ +#define ASM9260_BM_CTRL0_RXTO_MASK (0xff << 16) +/* TIMEOUT = (100*7+1)*(1/BAUD) */ +#define ASM9260_BM_CTRL0_DEFAULT_RXTIMEOUT (20 << 16) + +/* TX ctrl register */ +#define ASM9260_HW_CTRL1 0x0010 +/* + * RW. Tell the UART to execute the TX DMA Command. The + * UART will clear this bit at the end of transmit execution. + */ +#define ASM9260_BM_CTRL1_TXDMA_RUN BIT(28) + +#define ASM9260_HW_CTRL2 0x0020 +/* + * RW. Receive Interrupt FIFO Level Select. + * The trigger points for the receive interrupt are as follows: + * ONE_EIGHTHS = 0x0 Trigger on FIFO full to at least 2 of 16 entries. + * ONE_QUARTER = 0x1 Trigger on FIFO full to at least 4 of 16 entries. + * ONE_HALF = 0x2 Trigger on FIFO full to at least 8 of 16 entries. + * THREE_QUARTERS = 0x3 Trigger on FIFO full to at least 12 of 16 entries. + * SEVEN_EIGHTHS = 0x4 Trigger on FIFO full to at least 14 of 16 entries. + */ +#define ASM9260_BM_CTRL2_RXIFLSEL (7 << 20) +#define ASM9260_BM_CTRL2_DEFAULT_RXIFLSEL (3 << 20) +/* RW. Same as RXIFLSEL */ +#define ASM9260_BM_CTRL2_TXIFLSEL (7 << 16) +#define ASM9260_BM_CTRL2_DEFAULT_TXIFLSEL (2 << 16) +/* RW. Set DTR. When this bit is 1, the output is 0. */ +#define ASM9260_BM_CTRL2_DTR BIT(10) +/* RW. Loop Back Enable */ +#define ASM9260_BM_CTRL2_LBE BIT(7) +#define ASM9260_BM_CTRL2_PORT_ENABLE BIT(0) + +#define ASM9260_HW_LINECTRL 0x0030 +/* + * RW. Stick Parity Select. When bits 1, 2, and 7 of this register are set, the + * parity bit is transmitted and checked as a 0. When bits 1 and 7 are set, + * and bit 2 is 0, the parity bit is transmitted and checked as a 1. When this + * bit is cleared stick parity is disabled. + */ +#define ASM9260_BM_LCTRL_SPS BIT(7) +/* RW. Word length */ +#define ASM9260_BM_LCTRL_WLEN (3 << 5) +#define ASM9260_BM_LCTRL_CHRL_5 (0 << 5) +#define ASM9260_BM_LCTRL_CHRL_6 (1 << 5) +#define ASM9260_BM_LCTRL_CHRL_7 (2 << 5) +#define ASM9260_BM_LCTRL_CHRL_8 (3 << 5) + +/* + * Interrupt register. + * contains the interrupt enables and the interrupt status bits + */ +#define ASM9260_HW_INTR 0x0040 +/* Tx FIFO EMPTY Raw Interrupt enable */ +#define ASM9260_BM_INTR_TFEIEN BIT(27) +/* Overrun Error Interrupt Enable. */ +#define ASM9260_BM_INTR_OEIEN BIT(26) +/* Break Error Interrupt Enable. */ +#define ASM9260_BM_INTR_BEIEN BIT(25) +/* Parity Error Interrupt Enable. */ +#define ASM9260_BM_INTR_PEIEN BIT(24) +/* Framing Error Interrupt Enable. */ +#define ASM9260_BM_INTR_FEIEN BIT(23) + +/* nUARTDSR Modem Interrupt Enable. */ +#define ASM9260_BM_INTR_DSRMIEN BIT(19) +/* nUARTDCD Modem Interrupt Enable. */ +#define ASM9260_BM_INTR_DCDMIEN BIT(18) +/* nUARTRI Modem Interrupt Enable. */ +#define ASM9260_BM_INTR_RIMIEN BIT(16) +/* Auto-Boud Timeout */ +#define ASM9260_BM_INTR_ABTO BIT(13) +#define ASM9260_BM_INTR_ABEO BIT(12) +/* Tx FIFO EMPTY Raw Interrupt state */ +#define ASM9260_BM_INTR_TFEIS BIT(11) +/* Overrun Error */ +#define ASM9260_BM_INTR_OEIS BIT(10) +/* Break Error */ +#define ASM9260_BM_INTR_BEIS BIT(9) +/* Parity Error */ +#define ASM9260_BM_INTR_PEIS BIT(8) +/* Framing Error */ +#define ASM9260_BM_INTR_FEIS BIT(7) +#define ASM9260_BM_INTR_DSRMIS BIT(3) +#define ASM9260_BM_INTR_DCDMIS BIT(2) +#define ASM9260_BM_INTR_RIMIS BIT(0) + +/* + * RW. In DMA mode, up to 4 Received/Transmit characters can be accessed at a + * time. In PIO mode, only one character can be accessed at a time. The status + * register contains the receive data flags and valid bits. + */ +#define ASM9260_HW_DATA 0x0050 + +#define ASM9260_HW_STAT 0x0060 +/* RO. If 1, UARTAPP is present in this product. */ +#define ASM9260_BM_STAT_PRESENT BIT(31) +/* RO. If 1, HISPEED is present in this product. */ +#define ASM9260_BM_STAT_HISPEED BIT(30) +/* RO. Receive FIFO Full. */ +#define ASM9260_BM_STAT_RXFULL BIT(26) + +/* RO. The UART Debug Register contains the state of the DMA signals. */ +#define ASM9260_HW_DEBUG 0x0070 +/* DMA Command Run Status */ +#define ASM9260_BM_DEBUG_TXDMARUN BIT(5) +#define ASM9260_BM_DEBUG_RXDMARUN BIT(4) +/* DMA Command End Status */ +#define ASM9260_BM_DEBUG_TXCMDEND BIT(3) +#define ASM9260_BM_DEBUG_RXCMDEND BIT(2) +/* DMA Request Status */ +#define ASM9260_BM_DEBUG_TXDMARQ BIT(1) +#define ASM9260_BM_DEBUG_RXDMARQ BIT(0) + +#define ASM9260_HW_ILPR 0x0080 + +#define ASM9260_HW_RS485CTRL 0x0090 +/* + * RW. This bit reverses the polarity of the direction control signal on the RTS + * (or DTR) pin. + * If 0, The direction control pin will be driven to logic ‘0’ when the + * transmitter has data to be sent. It will be driven to logic ‘1’ after the + * last bit of data has been transmitted. + */ +#define ASM9260_BM_RS485CTRL_ONIV BIT(5) +/* RW. Enable Auto Direction Control. */ +#define ASM9260_BM_RS485CTRL_DIR_CTRL BIT(4) +/* + * RW. If 0 and DIR_CTRL = 1, pin RTS is used for direction control. + * If 1 and DIR_CTRL = 1, pin DTR is used for direction control. + */ +#define ASM9260_BM_RS485CTRL_PINSEL BIT(3) +/* RW. Enable Auto Address Detect (AAD). */ +#define ASM9260_BM_RS485CTRL_AADEN BIT(2) +/* RW. Disable receiver. */ +#define ASM9260_BM_RS485CTRL_RXDIS BIT(1) +/* RW. Enable RS-485/EIA-485 Normal Multidrop Mode (NMM) */ +#define ASM9260_BM_RS485CTRL_RS485EN BIT(0) + +#define ASM9260_HW_RS485ADRMATCH 0x00a0 +/* Contains the address match value. */ +#define ASM9260_BM_RS485ADRMATCH_MASK (0xff << 0) + +#define ASM9260_HW_RS485DLY 0x00b0 +/* + * RW. Contains the direction control (RTS or DTR) delay value. This delay time + * is in periods of the baud clock. + */ +#define ASM9260_BM_RS485DLY_MASK (0xff << 0) + +#define ASM9260_HW_AUTOBAUD 0x00c0 +/* WO. Auto-baud time-out interrupt clear bit. */ +#define ASM9260_BM_AUTOBAUD_TO_INT_CLR BIT(9) +/* WO. End of auto-baud interrupt clear bit. */ +#define ASM9260_BM_AUTOBAUD_EO_INT_CLR BIT(8) +/* Restart in case of timeout (counter restarts at next UART Rx falling edge) */ +#define ASM9260_BM_AUTOBAUD_AUTORESTART BIT(2) +/* Auto-baud mode select bit. 0 - Mode 0, 1 - Mode 1. */ +#define ASM9260_BM_AUTOBAUD_MODE BIT(1) +/* + * Auto-baud start (auto-baud is running). Auto-baud run bit. This bit is + * automatically cleared after auto-baud completion. + */ +#define ASM9260_BM_AUTOBAUD_START BIT(0) + +#define ASM9260_HW_CTRL3 0x00d0 +#define ASM9260_BM_CTRL3_OUTCLK_DIV_MASK (0xffff << 16) +/* + * RW. Provide clk over OUTCLK pin. In case of asm9260 it can be configured on + * pins 137 and 144. + */ +#define ASM9260_BM_CTRL3_MASTERMODE BIT(6) +/* RW. Baud Rate Mode: 1 - Enable sync mode. 0 - async mode. */ +#define ASM9260_BM_CTRL3_SYNCMODE BIT(4) +/* RW. 1 - MSB bit send frist; 0 - LSB bit frist. */ +#define ASM9260_BM_CTRL3_MSBF BIT(2) +/* RW. 1 - sample rate = 8 x Baudrate; 0 - sample rate = 16 x Baudrate. */ +#define ASM9260_BM_CTRL3_BAUD8 BIT(1) +/* RW. 1 - Set word length to 9bit. 0 - use ASM9260_BM_LCTRL_WLEN */ +#define ASM9260_BM_CTRL3_9BIT BIT(0) + +#define ASM9260_HW_ISO7816_CTRL 0x00e0 +/* RW. Enable High Speed mode. */ +#define ASM9260_BM_ISO7816CTRL_HS BIT(12) +/* Disable Successive Receive NACK */ +#define ASM9260_BM_ISO7816CTRL_DS_NACK BIT(8) +#define ASM9260_BM_ISO7816CTRL_MAX_ITER_MASK (0xff << 4) +/* Receive NACK Inhibit */ +#define ASM9260_BM_ISO7816CTRL_INACK BIT(3) +#define ASM9260_BM_ISO7816CTRL_NEG_DATA BIT(2) +/* RW. 1 - ISO7816 mode; 0 - USART mode */ +#define ASM9260_BM_ISO7816CTRL_ENABLE BIT(0) + +#define ASM9260_HW_ISO7816_ERRCNT 0x00f0 +/* Parity error counter. Will be cleared after reading */ +#define ASM9260_BM_ISO7816_NB_ERRORS_MASK (0xff << 0) + +#define ASM9260_HW_ISO7816_STATUS 0x0100 +/* Max number of Repetitions Reached */ +#define ASM9260_BM_ISO7816_STAT_ITERATION BIT(0) + +/* End of Alphascale asm9260 defines */ + +static struct uart_driver auart_driver; + +enum mxs_auart_type { + IMX23_AUART, + IMX28_AUART, + ASM9260_AUART, +}; + +struct vendor_data { + const u16 *reg_offset; +}; + +enum { + REG_CTRL0, + REG_CTRL1, + REG_CTRL2, + REG_LINECTRL, + REG_LINECTRL2, + REG_INTR, + REG_DATA, + REG_STAT, + REG_DEBUG, + REG_VERSION, + REG_AUTOBAUD, + + /* The size of the array - must be last */ + REG_ARRAY_SIZE, +}; + +static const u16 mxs_asm9260_offsets[REG_ARRAY_SIZE] = { + [REG_CTRL0] = ASM9260_HW_CTRL0, + [REG_CTRL1] = ASM9260_HW_CTRL1, + [REG_CTRL2] = ASM9260_HW_CTRL2, + [REG_LINECTRL] = ASM9260_HW_LINECTRL, + [REG_INTR] = ASM9260_HW_INTR, + [REG_DATA] = ASM9260_HW_DATA, + [REG_STAT] = ASM9260_HW_STAT, + [REG_DEBUG] = ASM9260_HW_DEBUG, + [REG_AUTOBAUD] = ASM9260_HW_AUTOBAUD, +}; + +static const u16 mxs_stmp37xx_offsets[REG_ARRAY_SIZE] = { + [REG_CTRL0] = AUART_CTRL0, + [REG_CTRL1] = AUART_CTRL1, + [REG_CTRL2] = AUART_CTRL2, + [REG_LINECTRL] = AUART_LINECTRL, + [REG_LINECTRL2] = AUART_LINECTRL2, + [REG_INTR] = AUART_INTR, + [REG_DATA] = AUART_DATA, + [REG_STAT] = AUART_STAT, + [REG_DEBUG] = AUART_DEBUG, + [REG_VERSION] = AUART_VERSION, + [REG_AUTOBAUD] = AUART_AUTOBAUD, +}; + +static const struct vendor_data vendor_alphascale_asm9260 = { + .reg_offset = mxs_asm9260_offsets, +}; + +static const struct vendor_data vendor_freescale_stmp37xx = { + .reg_offset = mxs_stmp37xx_offsets, +}; + +struct mxs_auart_port { + struct uart_port port; + +#define MXS_AUART_DMA_ENABLED 0x2 +#define MXS_AUART_DMA_TX_SYNC 2 /* bit 2 */ +#define MXS_AUART_DMA_RX_READY 3 /* bit 3 */ +#define MXS_AUART_RTSCTS 4 /* bit 4 */ + unsigned long flags; + unsigned int mctrl_prev; + enum mxs_auart_type devtype; + const struct vendor_data *vendor; + + struct clk *clk; + struct clk *clk_ahb; + struct device *dev; + + /* for DMA */ + struct scatterlist tx_sgl; + struct dma_chan *tx_dma_chan; + void *tx_dma_buf; + + struct scatterlist rx_sgl; + struct dma_chan *rx_dma_chan; + void *rx_dma_buf; + + struct mctrl_gpios *gpios; + int gpio_irq[UART_GPIO_MAX]; + bool ms_irq_enabled; +}; + +static const struct platform_device_id mxs_auart_devtype[] = { + { .name = "mxs-auart-imx23", .driver_data = IMX23_AUART }, + { .name = "mxs-auart-imx28", .driver_data = IMX28_AUART }, + { .name = "as-auart-asm9260", .driver_data = ASM9260_AUART }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(platform, mxs_auart_devtype); + +static const struct of_device_id mxs_auart_dt_ids[] = { + { + .compatible = "fsl,imx28-auart", + .data = &mxs_auart_devtype[IMX28_AUART] + }, { + .compatible = "fsl,imx23-auart", + .data = &mxs_auart_devtype[IMX23_AUART] + }, { + .compatible = "alphascale,asm9260-auart", + .data = &mxs_auart_devtype[ASM9260_AUART] + }, { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, mxs_auart_dt_ids); + +static inline int is_imx28_auart(struct mxs_auart_port *s) +{ + return s->devtype == IMX28_AUART; +} + +static inline int is_asm9260_auart(struct mxs_auart_port *s) +{ + return s->devtype == ASM9260_AUART; +} + +static inline bool auart_dma_enabled(struct mxs_auart_port *s) +{ + return s->flags & MXS_AUART_DMA_ENABLED; +} + +static unsigned int mxs_reg_to_offset(const struct mxs_auart_port *uap, + unsigned int reg) +{ + return uap->vendor->reg_offset[reg]; +} + +static unsigned int mxs_read(const struct mxs_auart_port *uap, + unsigned int reg) +{ + void __iomem *addr = uap->port.membase + mxs_reg_to_offset(uap, reg); + + return readl_relaxed(addr); +} + +static void mxs_write(unsigned int val, struct mxs_auart_port *uap, + unsigned int reg) +{ + void __iomem *addr = uap->port.membase + mxs_reg_to_offset(uap, reg); + + writel_relaxed(val, addr); +} + +static void mxs_set(unsigned int val, struct mxs_auart_port *uap, + unsigned int reg) +{ + void __iomem *addr = uap->port.membase + mxs_reg_to_offset(uap, reg); + + writel_relaxed(val, addr + SET_REG); +} + +static void mxs_clr(unsigned int val, struct mxs_auart_port *uap, + unsigned int reg) +{ + void __iomem *addr = uap->port.membase + mxs_reg_to_offset(uap, reg); + + writel_relaxed(val, addr + CLR_REG); +} + +static void mxs_auart_stop_tx(struct uart_port *u); + +#define to_auart_port(u) container_of(u, struct mxs_auart_port, port) + +static void mxs_auart_tx_chars(struct mxs_auart_port *s); + +static void dma_tx_callback(void *param) +{ + struct mxs_auart_port *s = param; + struct circ_buf *xmit = &s->port.state->xmit; + + dma_unmap_sg(s->dev, &s->tx_sgl, 1, DMA_TO_DEVICE); + + /* clear the bit used to serialize the DMA tx. */ + clear_bit(MXS_AUART_DMA_TX_SYNC, &s->flags); + smp_mb__after_atomic(); + + /* wake up the possible processes. */ + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&s->port); + + mxs_auart_tx_chars(s); +} + +static int mxs_auart_dma_tx(struct mxs_auart_port *s, int size) +{ + struct dma_async_tx_descriptor *desc; + struct scatterlist *sgl = &s->tx_sgl; + struct dma_chan *channel = s->tx_dma_chan; + u32 pio; + + /* [1] : send PIO. Note, the first pio word is CTRL1. */ + pio = AUART_CTRL1_XFER_COUNT(size); + desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)&pio, + 1, DMA_TRANS_NONE, 0); + if (!desc) { + dev_err(s->dev, "step 1 error\n"); + return -EINVAL; + } + + /* [2] : set DMA buffer. */ + sg_init_one(sgl, s->tx_dma_buf, size); + dma_map_sg(s->dev, sgl, 1, DMA_TO_DEVICE); + desc = dmaengine_prep_slave_sg(channel, sgl, + 1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) { + dev_err(s->dev, "step 2 error\n"); + return -EINVAL; + } + + /* [3] : submit the DMA */ + desc->callback = dma_tx_callback; + desc->callback_param = s; + dmaengine_submit(desc); + dma_async_issue_pending(channel); + return 0; +} + +static void mxs_auart_tx_chars(struct mxs_auart_port *s) +{ + struct circ_buf *xmit = &s->port.state->xmit; + + if (auart_dma_enabled(s)) { + u32 i = 0; + int size; + void *buffer = s->tx_dma_buf; + + if (test_and_set_bit(MXS_AUART_DMA_TX_SYNC, &s->flags)) + return; + + while (!uart_circ_empty(xmit) && !uart_tx_stopped(&s->port)) { + size = min_t(u32, UART_XMIT_SIZE - i, + CIRC_CNT_TO_END(xmit->head, + xmit->tail, + UART_XMIT_SIZE)); + memcpy(buffer + i, xmit->buf + xmit->tail, size); + xmit->tail = (xmit->tail + size) & (UART_XMIT_SIZE - 1); + + i += size; + if (i >= UART_XMIT_SIZE) + break; + } + + if (uart_tx_stopped(&s->port)) + mxs_auart_stop_tx(&s->port); + + if (i) { + mxs_auart_dma_tx(s, i); + } else { + clear_bit(MXS_AUART_DMA_TX_SYNC, &s->flags); + smp_mb__after_atomic(); + } + return; + } + + + while (!(mxs_read(s, REG_STAT) & AUART_STAT_TXFF)) { + if (s->port.x_char) { + s->port.icount.tx++; + mxs_write(s->port.x_char, s, REG_DATA); + s->port.x_char = 0; + continue; + } + if (!uart_circ_empty(xmit) && !uart_tx_stopped(&s->port)) { + s->port.icount.tx++; + mxs_write(xmit->buf[xmit->tail], s, REG_DATA); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + } else + break; + } + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&s->port); + + if (uart_circ_empty(&(s->port.state->xmit))) + mxs_clr(AUART_INTR_TXIEN, s, REG_INTR); + else + mxs_set(AUART_INTR_TXIEN, s, REG_INTR); + + if (uart_tx_stopped(&s->port)) + mxs_auart_stop_tx(&s->port); +} + +static void mxs_auart_rx_char(struct mxs_auart_port *s) +{ + int flag; + u32 stat; + u8 c; + + c = mxs_read(s, REG_DATA); + stat = mxs_read(s, REG_STAT); + + flag = TTY_NORMAL; + s->port.icount.rx++; + + if (stat & AUART_STAT_BERR) { + s->port.icount.brk++; + if (uart_handle_break(&s->port)) + goto out; + } else if (stat & AUART_STAT_PERR) { + s->port.icount.parity++; + } else if (stat & AUART_STAT_FERR) { + s->port.icount.frame++; + } + + /* + * Mask off conditions which should be ingored. + */ + stat &= s->port.read_status_mask; + + if (stat & AUART_STAT_BERR) { + flag = TTY_BREAK; + } else if (stat & AUART_STAT_PERR) + flag = TTY_PARITY; + else if (stat & AUART_STAT_FERR) + flag = TTY_FRAME; + + if (stat & AUART_STAT_OERR) + s->port.icount.overrun++; + + if (uart_handle_sysrq_char(&s->port, c)) + goto out; + + uart_insert_char(&s->port, stat, AUART_STAT_OERR, c, flag); +out: + mxs_write(stat, s, REG_STAT); +} + +static void mxs_auart_rx_chars(struct mxs_auart_port *s) +{ + u32 stat = 0; + + for (;;) { + stat = mxs_read(s, REG_STAT); + if (stat & AUART_STAT_RXFE) + break; + mxs_auart_rx_char(s); + } + + mxs_write(stat, s, REG_STAT); + tty_flip_buffer_push(&s->port.state->port); +} + +static int mxs_auart_request_port(struct uart_port *u) +{ + return 0; +} + +static int mxs_auart_verify_port(struct uart_port *u, + struct serial_struct *ser) +{ + if (u->type != PORT_UNKNOWN && u->type != PORT_IMX) + return -EINVAL; + return 0; +} + +static void mxs_auart_config_port(struct uart_port *u, int flags) +{ +} + +static const char *mxs_auart_type(struct uart_port *u) +{ + struct mxs_auart_port *s = to_auart_port(u); + + return dev_name(s->dev); +} + +static void mxs_auart_release_port(struct uart_port *u) +{ +} + +static void mxs_auart_set_mctrl(struct uart_port *u, unsigned mctrl) +{ + struct mxs_auart_port *s = to_auart_port(u); + + u32 ctrl = mxs_read(s, REG_CTRL2); + + ctrl &= ~(AUART_CTRL2_RTSEN | AUART_CTRL2_RTS); + if (mctrl & TIOCM_RTS) { + if (uart_cts_enabled(u)) + ctrl |= AUART_CTRL2_RTSEN; + else + ctrl |= AUART_CTRL2_RTS; + } + + mxs_write(ctrl, s, REG_CTRL2); + + mctrl_gpio_set(s->gpios, mctrl); +} + +#define MCTRL_ANY_DELTA (TIOCM_RI | TIOCM_DSR | TIOCM_CD | TIOCM_CTS) +static u32 mxs_auart_modem_status(struct mxs_auart_port *s, u32 mctrl) +{ + u32 mctrl_diff; + + mctrl_diff = mctrl ^ s->mctrl_prev; + s->mctrl_prev = mctrl; + if (mctrl_diff & MCTRL_ANY_DELTA && s->ms_irq_enabled && + s->port.state != NULL) { + if (mctrl_diff & TIOCM_RI) + s->port.icount.rng++; + if (mctrl_diff & TIOCM_DSR) + s->port.icount.dsr++; + if (mctrl_diff & TIOCM_CD) + uart_handle_dcd_change(&s->port, mctrl & TIOCM_CD); + if (mctrl_diff & TIOCM_CTS) + uart_handle_cts_change(&s->port, mctrl & TIOCM_CTS); + + wake_up_interruptible(&s->port.state->port.delta_msr_wait); + } + return mctrl; +} + +static u32 mxs_auart_get_mctrl(struct uart_port *u) +{ + struct mxs_auart_port *s = to_auart_port(u); + u32 stat = mxs_read(s, REG_STAT); + u32 mctrl = 0; + + if (stat & AUART_STAT_CTS) + mctrl |= TIOCM_CTS; + + return mctrl_gpio_get(s->gpios, &mctrl); +} + +/* + * Enable modem status interrupts + */ +static void mxs_auart_enable_ms(struct uart_port *port) +{ + struct mxs_auart_port *s = to_auart_port(port); + + /* + * Interrupt should not be enabled twice + */ + if (s->ms_irq_enabled) + return; + + s->ms_irq_enabled = true; + + if (s->gpio_irq[UART_GPIO_CTS] >= 0) + enable_irq(s->gpio_irq[UART_GPIO_CTS]); + /* TODO: enable AUART_INTR_CTSMIEN otherwise */ + + if (s->gpio_irq[UART_GPIO_DSR] >= 0) + enable_irq(s->gpio_irq[UART_GPIO_DSR]); + + if (s->gpio_irq[UART_GPIO_RI] >= 0) + enable_irq(s->gpio_irq[UART_GPIO_RI]); + + if (s->gpio_irq[UART_GPIO_DCD] >= 0) + enable_irq(s->gpio_irq[UART_GPIO_DCD]); +} + +/* + * Disable modem status interrupts + */ +static void mxs_auart_disable_ms(struct uart_port *port) +{ + struct mxs_auart_port *s = to_auart_port(port); + + /* + * Interrupt should not be disabled twice + */ + if (!s->ms_irq_enabled) + return; + + s->ms_irq_enabled = false; + + if (s->gpio_irq[UART_GPIO_CTS] >= 0) + disable_irq(s->gpio_irq[UART_GPIO_CTS]); + /* TODO: disable AUART_INTR_CTSMIEN otherwise */ + + if (s->gpio_irq[UART_GPIO_DSR] >= 0) + disable_irq(s->gpio_irq[UART_GPIO_DSR]); + + if (s->gpio_irq[UART_GPIO_RI] >= 0) + disable_irq(s->gpio_irq[UART_GPIO_RI]); + + if (s->gpio_irq[UART_GPIO_DCD] >= 0) + disable_irq(s->gpio_irq[UART_GPIO_DCD]); +} + +static int mxs_auart_dma_prep_rx(struct mxs_auart_port *s); +static void dma_rx_callback(void *arg) +{ + struct mxs_auart_port *s = (struct mxs_auart_port *) arg; + struct tty_port *port = &s->port.state->port; + int count; + u32 stat; + + dma_unmap_sg(s->dev, &s->rx_sgl, 1, DMA_FROM_DEVICE); + + stat = mxs_read(s, REG_STAT); + stat &= ~(AUART_STAT_OERR | AUART_STAT_BERR | + AUART_STAT_PERR | AUART_STAT_FERR); + + count = stat & AUART_STAT_RXCOUNT_MASK; + tty_insert_flip_string(port, s->rx_dma_buf, count); + + mxs_write(stat, s, REG_STAT); + tty_flip_buffer_push(port); + + /* start the next DMA for RX. */ + mxs_auart_dma_prep_rx(s); +} + +static int mxs_auart_dma_prep_rx(struct mxs_auart_port *s) +{ + struct dma_async_tx_descriptor *desc; + struct scatterlist *sgl = &s->rx_sgl; + struct dma_chan *channel = s->rx_dma_chan; + u32 pio[1]; + + /* [1] : send PIO */ + pio[0] = AUART_CTRL0_RXTO_ENABLE + | AUART_CTRL0_RXTIMEOUT(0x80) + | AUART_CTRL0_XFER_COUNT(UART_XMIT_SIZE); + desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio, + 1, DMA_TRANS_NONE, 0); + if (!desc) { + dev_err(s->dev, "step 1 error\n"); + return -EINVAL; + } + + /* [2] : send DMA request */ + sg_init_one(sgl, s->rx_dma_buf, UART_XMIT_SIZE); + dma_map_sg(s->dev, sgl, 1, DMA_FROM_DEVICE); + desc = dmaengine_prep_slave_sg(channel, sgl, 1, DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) { + dev_err(s->dev, "step 2 error\n"); + return -1; + } + + /* [3] : submit the DMA, but do not issue it. */ + desc->callback = dma_rx_callback; + desc->callback_param = s; + dmaengine_submit(desc); + dma_async_issue_pending(channel); + return 0; +} + +static void mxs_auart_dma_exit_channel(struct mxs_auart_port *s) +{ + if (s->tx_dma_chan) { + dma_release_channel(s->tx_dma_chan); + s->tx_dma_chan = NULL; + } + if (s->rx_dma_chan) { + dma_release_channel(s->rx_dma_chan); + s->rx_dma_chan = NULL; + } + + kfree(s->tx_dma_buf); + kfree(s->rx_dma_buf); + s->tx_dma_buf = NULL; + s->rx_dma_buf = NULL; +} + +static void mxs_auart_dma_exit(struct mxs_auart_port *s) +{ + + mxs_clr(AUART_CTRL2_TXDMAE | AUART_CTRL2_RXDMAE | AUART_CTRL2_DMAONERR, + s, REG_CTRL2); + + mxs_auart_dma_exit_channel(s); + s->flags &= ~MXS_AUART_DMA_ENABLED; + clear_bit(MXS_AUART_DMA_TX_SYNC, &s->flags); + clear_bit(MXS_AUART_DMA_RX_READY, &s->flags); +} + +static int mxs_auart_dma_init(struct mxs_auart_port *s) +{ + if (auart_dma_enabled(s)) + return 0; + + /* init for RX */ + s->rx_dma_chan = dma_request_slave_channel(s->dev, "rx"); + if (!s->rx_dma_chan) + goto err_out; + s->rx_dma_buf = kzalloc(UART_XMIT_SIZE, GFP_KERNEL | GFP_DMA); + if (!s->rx_dma_buf) + goto err_out; + + /* init for TX */ + s->tx_dma_chan = dma_request_slave_channel(s->dev, "tx"); + if (!s->tx_dma_chan) + goto err_out; + s->tx_dma_buf = kzalloc(UART_XMIT_SIZE, GFP_KERNEL | GFP_DMA); + if (!s->tx_dma_buf) + goto err_out; + + /* set the flags */ + s->flags |= MXS_AUART_DMA_ENABLED; + dev_dbg(s->dev, "enabled the DMA support."); + + /* The DMA buffer is now the FIFO the TTY subsystem can use */ + s->port.fifosize = UART_XMIT_SIZE; + + return 0; + +err_out: + mxs_auart_dma_exit_channel(s); + return -EINVAL; + +} + +#define RTS_AT_AUART() !mctrl_gpio_to_gpiod(s->gpios, UART_GPIO_RTS) +#define CTS_AT_AUART() !mctrl_gpio_to_gpiod(s->gpios, UART_GPIO_CTS) +static void mxs_auart_settermios(struct uart_port *u, + struct ktermios *termios, + struct ktermios *old) +{ + struct mxs_auart_port *s = to_auart_port(u); + u32 bm, ctrl, ctrl2, div; + unsigned int cflag, baud, baud_min, baud_max; + + cflag = termios->c_cflag; + + ctrl = AUART_LINECTRL_FEN; + ctrl2 = mxs_read(s, REG_CTRL2); + + /* byte size */ + switch (cflag & CSIZE) { + case CS5: + bm = 0; + break; + case CS6: + bm = 1; + break; + case CS7: + bm = 2; + break; + case CS8: + bm = 3; + break; + default: + return; + } + + ctrl |= AUART_LINECTRL_WLEN(bm); + + /* parity */ + if (cflag & PARENB) { + ctrl |= AUART_LINECTRL_PEN; + if ((cflag & PARODD) == 0) + ctrl |= AUART_LINECTRL_EPS; + if (cflag & CMSPAR) + ctrl |= AUART_LINECTRL_SPS; + } + + u->read_status_mask = AUART_STAT_OERR; + + if (termios->c_iflag & INPCK) + u->read_status_mask |= AUART_STAT_PERR; + if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) + u->read_status_mask |= AUART_STAT_BERR; + + /* + * Characters to ignore + */ + u->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + u->ignore_status_mask |= AUART_STAT_PERR; + if (termios->c_iflag & IGNBRK) { + u->ignore_status_mask |= AUART_STAT_BERR; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + u->ignore_status_mask |= AUART_STAT_OERR; + } + + /* + * ignore all characters if CREAD is not set + */ + if (cflag & CREAD) + ctrl2 |= AUART_CTRL2_RXE; + else + ctrl2 &= ~AUART_CTRL2_RXE; + + /* figure out the stop bits requested */ + if (cflag & CSTOPB) + ctrl |= AUART_LINECTRL_STP2; + + /* figure out the hardware flow control settings */ + ctrl2 &= ~(AUART_CTRL2_CTSEN | AUART_CTRL2_RTSEN); + if (cflag & CRTSCTS) { + /* + * The DMA has a bug(see errata:2836) in mx23. + * So we can not implement the DMA for auart in mx23, + * we can only implement the DMA support for auart + * in mx28. + */ + if (is_imx28_auart(s) + && test_bit(MXS_AUART_RTSCTS, &s->flags)) { + if (!mxs_auart_dma_init(s)) + /* enable DMA tranfer */ + ctrl2 |= AUART_CTRL2_TXDMAE | AUART_CTRL2_RXDMAE + | AUART_CTRL2_DMAONERR; + } + /* Even if RTS is GPIO line RTSEN can be enabled because + * the pinctrl configuration decides about RTS pin function */ + ctrl2 |= AUART_CTRL2_RTSEN; + if (CTS_AT_AUART()) + ctrl2 |= AUART_CTRL2_CTSEN; + } + + /* set baud rate */ + if (is_asm9260_auart(s)) { + baud = uart_get_baud_rate(u, termios, old, + u->uartclk * 4 / 0x3FFFFF, + u->uartclk / 16); + div = u->uartclk * 4 / baud; + } else { + baud_min = DIV_ROUND_UP(u->uartclk * 32, + AUART_LINECTRL_BAUD_DIV_MAX); + baud_max = u->uartclk * 32 / AUART_LINECTRL_BAUD_DIV_MIN; + baud = uart_get_baud_rate(u, termios, old, baud_min, baud_max); + div = DIV_ROUND_CLOSEST(u->uartclk * 32, baud); + } + + ctrl |= AUART_LINECTRL_BAUD_DIVFRAC(div & 0x3F); + ctrl |= AUART_LINECTRL_BAUD_DIVINT(div >> 6); + mxs_write(ctrl, s, REG_LINECTRL); + + mxs_write(ctrl2, s, REG_CTRL2); + + uart_update_timeout(u, termios->c_cflag, baud); + + /* prepare for the DMA RX. */ + if (auart_dma_enabled(s) && + !test_and_set_bit(MXS_AUART_DMA_RX_READY, &s->flags)) { + if (!mxs_auart_dma_prep_rx(s)) { + /* Disable the normal RX interrupt. */ + mxs_clr(AUART_INTR_RXIEN | AUART_INTR_RTIEN, + s, REG_INTR); + } else { + mxs_auart_dma_exit(s); + dev_err(s->dev, "We can not start up the DMA.\n"); + } + } + + /* CTS flow-control and modem-status interrupts */ + if (UART_ENABLE_MS(u, termios->c_cflag)) + mxs_auart_enable_ms(u); + else + mxs_auart_disable_ms(u); +} + +static void mxs_auart_set_ldisc(struct uart_port *port, + struct ktermios *termios) +{ + if (termios->c_line == N_PPS) { + port->flags |= UPF_HARDPPS_CD; + mxs_auart_enable_ms(port); + } else { + port->flags &= ~UPF_HARDPPS_CD; + } +} + +static irqreturn_t mxs_auart_irq_handle(int irq, void *context) +{ + u32 istat; + struct mxs_auart_port *s = context; + u32 mctrl_temp = s->mctrl_prev; + u32 stat = mxs_read(s, REG_STAT); + + istat = mxs_read(s, REG_INTR); + + /* ack irq */ + mxs_clr(istat & (AUART_INTR_RTIS | AUART_INTR_TXIS | AUART_INTR_RXIS + | AUART_INTR_CTSMIS), s, REG_INTR); + + /* + * Dealing with GPIO interrupt + */ + if (irq == s->gpio_irq[UART_GPIO_CTS] || + irq == s->gpio_irq[UART_GPIO_DCD] || + irq == s->gpio_irq[UART_GPIO_DSR] || + irq == s->gpio_irq[UART_GPIO_RI]) + mxs_auart_modem_status(s, + mctrl_gpio_get(s->gpios, &mctrl_temp)); + + if (istat & AUART_INTR_CTSMIS) { + if (CTS_AT_AUART() && s->ms_irq_enabled) + uart_handle_cts_change(&s->port, + stat & AUART_STAT_CTS); + mxs_clr(AUART_INTR_CTSMIS, s, REG_INTR); + istat &= ~AUART_INTR_CTSMIS; + } + + if (istat & (AUART_INTR_RTIS | AUART_INTR_RXIS)) { + if (!auart_dma_enabled(s)) + mxs_auart_rx_chars(s); + istat &= ~(AUART_INTR_RTIS | AUART_INTR_RXIS); + } + + if (istat & AUART_INTR_TXIS) { + mxs_auart_tx_chars(s); + istat &= ~AUART_INTR_TXIS; + } + + return IRQ_HANDLED; +} + +static void mxs_auart_reset_deassert(struct mxs_auart_port *s) +{ + int i; + unsigned int reg; + + mxs_clr(AUART_CTRL0_SFTRST, s, REG_CTRL0); + + for (i = 0; i < 10000; i++) { + reg = mxs_read(s, REG_CTRL0); + if (!(reg & AUART_CTRL0_SFTRST)) + break; + udelay(3); + } + mxs_clr(AUART_CTRL0_CLKGATE, s, REG_CTRL0); +} + +static void mxs_auart_reset_assert(struct mxs_auart_port *s) +{ + int i; + u32 reg; + + reg = mxs_read(s, REG_CTRL0); + /* if already in reset state, keep it untouched */ + if (reg & AUART_CTRL0_SFTRST) + return; + + mxs_clr(AUART_CTRL0_CLKGATE, s, REG_CTRL0); + mxs_set(AUART_CTRL0_SFTRST, s, REG_CTRL0); + + for (i = 0; i < 1000; i++) { + reg = mxs_read(s, REG_CTRL0); + /* reset is finished when the clock is gated */ + if (reg & AUART_CTRL0_CLKGATE) + return; + udelay(10); + } + + dev_err(s->dev, "Failed to reset the unit."); +} + +static int mxs_auart_startup(struct uart_port *u) +{ + int ret; + struct mxs_auart_port *s = to_auart_port(u); + + ret = clk_prepare_enable(s->clk); + if (ret) + return ret; + + if (uart_console(u)) { + mxs_clr(AUART_CTRL0_CLKGATE, s, REG_CTRL0); + } else { + /* reset the unit to a well known state */ + mxs_auart_reset_assert(s); + mxs_auart_reset_deassert(s); + } + + mxs_set(AUART_CTRL2_UARTEN, s, REG_CTRL2); + + mxs_write(AUART_INTR_RXIEN | AUART_INTR_RTIEN | AUART_INTR_CTSMIEN, + s, REG_INTR); + + /* Reset FIFO size (it could have changed if DMA was enabled) */ + u->fifosize = MXS_AUART_FIFO_SIZE; + + /* + * Enable fifo so all four bytes of a DMA word are written to + * output (otherwise, only the LSB is written, ie. 1 in 4 bytes) + */ + mxs_set(AUART_LINECTRL_FEN, s, REG_LINECTRL); + + /* get initial status of modem lines */ + mctrl_gpio_get(s->gpios, &s->mctrl_prev); + + s->ms_irq_enabled = false; + return 0; +} + +static void mxs_auart_shutdown(struct uart_port *u) +{ + struct mxs_auart_port *s = to_auart_port(u); + + mxs_auart_disable_ms(u); + + if (auart_dma_enabled(s)) + mxs_auart_dma_exit(s); + + if (uart_console(u)) { + mxs_clr(AUART_CTRL2_UARTEN, s, REG_CTRL2); + + mxs_clr(AUART_INTR_RXIEN | AUART_INTR_RTIEN | + AUART_INTR_CTSMIEN, s, REG_INTR); + mxs_set(AUART_CTRL0_CLKGATE, s, REG_CTRL0); + } else { + mxs_auart_reset_assert(s); + } + + clk_disable_unprepare(s->clk); +} + +static unsigned int mxs_auart_tx_empty(struct uart_port *u) +{ + struct mxs_auart_port *s = to_auart_port(u); + + if ((mxs_read(s, REG_STAT) & + (AUART_STAT_TXFE | AUART_STAT_BUSY)) == AUART_STAT_TXFE) + return TIOCSER_TEMT; + + return 0; +} + +static void mxs_auart_start_tx(struct uart_port *u) +{ + struct mxs_auart_port *s = to_auart_port(u); + + /* enable transmitter */ + mxs_set(AUART_CTRL2_TXE, s, REG_CTRL2); + + mxs_auart_tx_chars(s); +} + +static void mxs_auart_stop_tx(struct uart_port *u) +{ + struct mxs_auart_port *s = to_auart_port(u); + + mxs_clr(AUART_CTRL2_TXE, s, REG_CTRL2); +} + +static void mxs_auart_stop_rx(struct uart_port *u) +{ + struct mxs_auart_port *s = to_auart_port(u); + + mxs_clr(AUART_CTRL2_RXE, s, REG_CTRL2); +} + +static void mxs_auart_break_ctl(struct uart_port *u, int ctl) +{ + struct mxs_auart_port *s = to_auart_port(u); + + if (ctl) + mxs_set(AUART_LINECTRL_BRK, s, REG_LINECTRL); + else + mxs_clr(AUART_LINECTRL_BRK, s, REG_LINECTRL); +} + +static const struct uart_ops mxs_auart_ops = { + .tx_empty = mxs_auart_tx_empty, + .start_tx = mxs_auart_start_tx, + .stop_tx = mxs_auart_stop_tx, + .stop_rx = mxs_auart_stop_rx, + .enable_ms = mxs_auart_enable_ms, + .break_ctl = mxs_auart_break_ctl, + .set_mctrl = mxs_auart_set_mctrl, + .get_mctrl = mxs_auart_get_mctrl, + .startup = mxs_auart_startup, + .shutdown = mxs_auart_shutdown, + .set_termios = mxs_auart_settermios, + .set_ldisc = mxs_auart_set_ldisc, + .type = mxs_auart_type, + .release_port = mxs_auart_release_port, + .request_port = mxs_auart_request_port, + .config_port = mxs_auart_config_port, + .verify_port = mxs_auart_verify_port, +}; + +static struct mxs_auart_port *auart_port[MXS_AUART_PORTS]; + +#ifdef CONFIG_SERIAL_MXS_AUART_CONSOLE +static void mxs_auart_console_putchar(struct uart_port *port, int ch) +{ + struct mxs_auart_port *s = to_auart_port(port); + unsigned int to = 1000; + + while (mxs_read(s, REG_STAT) & AUART_STAT_TXFF) { + if (!to--) + break; + udelay(1); + } + + mxs_write(ch, s, REG_DATA); +} + +static void +auart_console_write(struct console *co, const char *str, unsigned int count) +{ + struct mxs_auart_port *s; + struct uart_port *port; + unsigned int old_ctrl0, old_ctrl2; + unsigned int to = 20000; + + if (co->index >= MXS_AUART_PORTS || co->index < 0) + return; + + s = auart_port[co->index]; + port = &s->port; + + clk_enable(s->clk); + + /* First save the CR then disable the interrupts */ + old_ctrl2 = mxs_read(s, REG_CTRL2); + old_ctrl0 = mxs_read(s, REG_CTRL0); + + mxs_clr(AUART_CTRL0_CLKGATE, s, REG_CTRL0); + mxs_set(AUART_CTRL2_UARTEN | AUART_CTRL2_TXE, s, REG_CTRL2); + + uart_console_write(port, str, count, mxs_auart_console_putchar); + + /* Finally, wait for transmitter to become empty ... */ + while (mxs_read(s, REG_STAT) & AUART_STAT_BUSY) { + udelay(1); + if (!to--) + break; + } + + /* + * ... and restore the TCR if we waited long enough for the transmitter + * to be idle. This might keep the transmitter enabled although it is + * unused, but that is better than to disable it while it is still + * transmitting. + */ + if (!(mxs_read(s, REG_STAT) & AUART_STAT_BUSY)) { + mxs_write(old_ctrl0, s, REG_CTRL0); + mxs_write(old_ctrl2, s, REG_CTRL2); + } + + clk_disable(s->clk); +} + +static void __init +auart_console_get_options(struct mxs_auart_port *s, int *baud, + int *parity, int *bits) +{ + struct uart_port *port = &s->port; + unsigned int lcr_h, quot; + + if (!(mxs_read(s, REG_CTRL2) & AUART_CTRL2_UARTEN)) + return; + + lcr_h = mxs_read(s, REG_LINECTRL); + + *parity = 'n'; + if (lcr_h & AUART_LINECTRL_PEN) { + if (lcr_h & AUART_LINECTRL_EPS) + *parity = 'e'; + else + *parity = 'o'; + } + + if ((lcr_h & AUART_LINECTRL_WLEN_MASK) == AUART_LINECTRL_WLEN(2)) + *bits = 7; + else + *bits = 8; + + quot = ((mxs_read(s, REG_LINECTRL) & AUART_LINECTRL_BAUD_DIVINT_MASK)) + >> (AUART_LINECTRL_BAUD_DIVINT_SHIFT - 6); + quot |= ((mxs_read(s, REG_LINECTRL) & AUART_LINECTRL_BAUD_DIVFRAC_MASK)) + >> AUART_LINECTRL_BAUD_DIVFRAC_SHIFT; + if (quot == 0) + quot = 1; + + *baud = (port->uartclk << 2) / quot; +} + +static int __init +auart_console_setup(struct console *co, char *options) +{ + struct mxs_auart_port *s; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + int ret; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index == -1 || co->index >= ARRAY_SIZE(auart_port)) + co->index = 0; + s = auart_port[co->index]; + if (!s) + return -ENODEV; + + ret = clk_prepare_enable(s->clk); + if (ret) + return ret; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + auart_console_get_options(s, &baud, &parity, &bits); + + ret = uart_set_options(&s->port, co, baud, parity, bits, flow); + + clk_disable_unprepare(s->clk); + + return ret; +} + +static struct console auart_console = { + .name = "ttyAPP", + .write = auart_console_write, + .device = uart_console_device, + .setup = auart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &auart_driver, +}; +#endif + +static struct uart_driver auart_driver = { + .owner = THIS_MODULE, + .driver_name = "ttyAPP", + .dev_name = "ttyAPP", + .major = 0, + .minor = 0, + .nr = MXS_AUART_PORTS, +#ifdef CONFIG_SERIAL_MXS_AUART_CONSOLE + .cons = &auart_console, +#endif +}; + +static void mxs_init_regs(struct mxs_auart_port *s) +{ + if (is_asm9260_auart(s)) + s->vendor = &vendor_alphascale_asm9260; + else + s->vendor = &vendor_freescale_stmp37xx; +} + +static int mxs_get_clks(struct mxs_auart_port *s, + struct platform_device *pdev) +{ + int err; + + if (!is_asm9260_auart(s)) { + s->clk = devm_clk_get(&pdev->dev, NULL); + return PTR_ERR_OR_ZERO(s->clk); + } + + s->clk = devm_clk_get(s->dev, "mod"); + if (IS_ERR(s->clk)) { + dev_err(s->dev, "Failed to get \"mod\" clk\n"); + return PTR_ERR(s->clk); + } + + s->clk_ahb = devm_clk_get(s->dev, "ahb"); + if (IS_ERR(s->clk_ahb)) { + dev_err(s->dev, "Failed to get \"ahb\" clk\n"); + return PTR_ERR(s->clk_ahb); + } + + err = clk_prepare_enable(s->clk_ahb); + if (err) { + dev_err(s->dev, "Failed to enable ahb_clk!\n"); + return err; + } + + err = clk_set_rate(s->clk, clk_get_rate(s->clk_ahb)); + if (err) { + dev_err(s->dev, "Failed to set rate!\n"); + goto disable_clk_ahb; + } + + err = clk_prepare_enable(s->clk); + if (err) { + dev_err(s->dev, "Failed to enable clk!\n"); + goto disable_clk_ahb; + } + + return 0; + +disable_clk_ahb: + clk_disable_unprepare(s->clk_ahb); + return err; +} + +/* + * This function returns 1 if pdev isn't a device instatiated by dt, 0 if it + * could successfully get all information from dt or a negative errno. + */ +static int serial_mxs_probe_dt(struct mxs_auart_port *s, + struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + int ret; + + if (!np) + /* no device tree device */ + return 1; + + ret = of_alias_get_id(np, "serial"); + if (ret < 0) { + dev_err(&pdev->dev, "failed to get alias id: %d\n", ret); + return ret; + } + s->port.line = ret; + + if (of_get_property(np, "uart-has-rtscts", NULL) || + of_get_property(np, "fsl,uart-has-rtscts", NULL) /* deprecated */) + set_bit(MXS_AUART_RTSCTS, &s->flags); + + return 0; +} + +static int mxs_auart_init_gpios(struct mxs_auart_port *s, struct device *dev) +{ + enum mctrl_gpio_idx i; + struct gpio_desc *gpiod; + + s->gpios = mctrl_gpio_init_noauto(dev, 0); + if (IS_ERR(s->gpios)) + return PTR_ERR(s->gpios); + + /* Block (enabled before) DMA option if RTS or CTS is GPIO line */ + if (!RTS_AT_AUART() || !CTS_AT_AUART()) { + if (test_bit(MXS_AUART_RTSCTS, &s->flags)) + dev_warn(dev, + "DMA and flow control via gpio may cause some problems. DMA disabled!\n"); + clear_bit(MXS_AUART_RTSCTS, &s->flags); + } + + for (i = 0; i < UART_GPIO_MAX; i++) { + gpiod = mctrl_gpio_to_gpiod(s->gpios, i); + if (gpiod && (gpiod_get_direction(gpiod) == 1)) + s->gpio_irq[i] = gpiod_to_irq(gpiod); + else + s->gpio_irq[i] = -EINVAL; + } + + return 0; +} + +static void mxs_auart_free_gpio_irq(struct mxs_auart_port *s) +{ + enum mctrl_gpio_idx i; + + for (i = 0; i < UART_GPIO_MAX; i++) + if (s->gpio_irq[i] >= 0) + free_irq(s->gpio_irq[i], s); +} + +static int mxs_auart_request_gpio_irq(struct mxs_auart_port *s) +{ + int *irq = s->gpio_irq; + enum mctrl_gpio_idx i; + int err = 0; + + for (i = 0; (i < UART_GPIO_MAX) && !err; i++) { + if (irq[i] < 0) + continue; + + irq_set_status_flags(irq[i], IRQ_NOAUTOEN); + err = request_irq(irq[i], mxs_auart_irq_handle, + IRQ_TYPE_EDGE_BOTH, dev_name(s->dev), s); + if (err) + dev_err(s->dev, "%s - Can't get %d irq\n", + __func__, irq[i]); + } + + /* + * If something went wrong, rollback. + * Be careful: i may be unsigned. + */ + while (err && (i-- > 0)) + if (irq[i] >= 0) + free_irq(irq[i], s); + + return err; +} + +static int mxs_auart_probe(struct platform_device *pdev) +{ + const struct of_device_id *of_id = + of_match_device(mxs_auart_dt_ids, &pdev->dev); + struct mxs_auart_port *s; + u32 version; + int ret, irq; + struct resource *r; + + s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL); + if (!s) + return -ENOMEM; + + s->port.dev = &pdev->dev; + s->dev = &pdev->dev; + + ret = serial_mxs_probe_dt(s, pdev); + if (ret > 0) + s->port.line = pdev->id < 0 ? 0 : pdev->id; + else if (ret < 0) + return ret; + if (s->port.line >= ARRAY_SIZE(auart_port)) { + dev_err(&pdev->dev, "serial%d out of range\n", s->port.line); + return -EINVAL; + } + + if (of_id) { + pdev->id_entry = of_id->data; + s->devtype = pdev->id_entry->driver_data; + } + + ret = mxs_get_clks(s, pdev); + if (ret) + return ret; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) { + ret = -ENXIO; + goto out_disable_clks; + } + + s->port.mapbase = r->start; + s->port.membase = ioremap(r->start, resource_size(r)); + if (!s->port.membase) { + ret = -ENOMEM; + goto out_disable_clks; + } + s->port.ops = &mxs_auart_ops; + s->port.iotype = UPIO_MEM; + s->port.fifosize = MXS_AUART_FIFO_SIZE; + s->port.uartclk = clk_get_rate(s->clk); + s->port.type = PORT_IMX; + s->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_MXS_AUART_CONSOLE); + + mxs_init_regs(s); + + s->mctrl_prev = 0; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + ret = irq; + goto out_iounmap; + } + + s->port.irq = irq; + ret = devm_request_irq(&pdev->dev, irq, mxs_auart_irq_handle, 0, + dev_name(&pdev->dev), s); + if (ret) + goto out_iounmap; + + platform_set_drvdata(pdev, s); + + ret = mxs_auart_init_gpios(s, &pdev->dev); + if (ret) { + dev_err(&pdev->dev, "Failed to initialize GPIOs.\n"); + goto out_iounmap; + } + + /* + * Get the GPIO lines IRQ + */ + ret = mxs_auart_request_gpio_irq(s); + if (ret) + goto out_iounmap; + + auart_port[s->port.line] = s; + + mxs_auart_reset_deassert(s); + + ret = uart_add_one_port(&auart_driver, &s->port); + if (ret) + goto out_free_qpio_irq; + + /* ASM9260 don't have version reg */ + if (is_asm9260_auart(s)) { + dev_info(&pdev->dev, "Found APPUART ASM9260\n"); + } else { + version = mxs_read(s, REG_VERSION); + dev_info(&pdev->dev, "Found APPUART %d.%d.%d\n", + (version >> 24) & 0xff, + (version >> 16) & 0xff, version & 0xffff); + } + + return 0; + +out_free_qpio_irq: + mxs_auart_free_gpio_irq(s); + auart_port[pdev->id] = NULL; + +out_iounmap: + iounmap(s->port.membase); + +out_disable_clks: + if (is_asm9260_auart(s)) { + clk_disable_unprepare(s->clk); + clk_disable_unprepare(s->clk_ahb); + } + return ret; +} + +static int mxs_auart_remove(struct platform_device *pdev) +{ + struct mxs_auart_port *s = platform_get_drvdata(pdev); + + uart_remove_one_port(&auart_driver, &s->port); + auart_port[pdev->id] = NULL; + mxs_auart_free_gpio_irq(s); + iounmap(s->port.membase); + if (is_asm9260_auart(s)) { + clk_disable_unprepare(s->clk); + clk_disable_unprepare(s->clk_ahb); + } + + return 0; +} + +static struct platform_driver mxs_auart_driver = { + .probe = mxs_auart_probe, + .remove = mxs_auart_remove, + .driver = { + .name = "mxs-auart", + .of_match_table = mxs_auart_dt_ids, + }, +}; + +static int __init mxs_auart_init(void) +{ + int r; + + r = uart_register_driver(&auart_driver); + if (r) + goto out; + + r = platform_driver_register(&mxs_auart_driver); + if (r) + goto out_err; + + return 0; +out_err: + uart_unregister_driver(&auart_driver); +out: + return r; +} + +static void __exit mxs_auart_exit(void) +{ + platform_driver_unregister(&mxs_auart_driver); + uart_unregister_driver(&auart_driver); +} + +module_init(mxs_auart_init); +module_exit(mxs_auart_exit); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Freescale MXS application uart driver"); +MODULE_ALIAS("platform:mxs-auart"); diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c new file mode 100644 index 000000000..84e815808 --- /dev/null +++ b/drivers/tty/serial/omap-serial.c @@ -0,0 +1,1956 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver for OMAP-UART controller. + * Based on drivers/serial/8250.c + * + * Copyright (C) 2010 Texas Instruments. + * + * Authors: + * Govindraj R + * Thara Gopinath + * + * Note: This driver is made separate from 8250 driver as we cannot + * over load 8250 driver with omap platform specific configuration for + * features like DMA, it makes easier to implement features like DMA and + * hardware flow control and software flow control configuration with + * this driver as required for the omap-platform. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define OMAP_MAX_HSUART_PORTS 10 + +#define UART_BUILD_REVISION(x, y) (((x) << 8) | (y)) + +#define OMAP_UART_REV_42 0x0402 +#define OMAP_UART_REV_46 0x0406 +#define OMAP_UART_REV_52 0x0502 +#define OMAP_UART_REV_63 0x0603 + +#define OMAP_UART_TX_WAKEUP_EN BIT(7) + +/* Feature flags */ +#define OMAP_UART_WER_HAS_TX_WAKEUP BIT(0) + +#define UART_ERRATA_i202_MDR1_ACCESS BIT(0) +#define UART_ERRATA_i291_DMA_FORCEIDLE BIT(1) + +#define DEFAULT_CLK_SPEED 48000000 /* 48Mhz */ + +/* SCR register bitmasks */ +#define OMAP_UART_SCR_RX_TRIG_GRANU1_MASK (1 << 7) +#define OMAP_UART_SCR_TX_TRIG_GRANU1_MASK (1 << 6) +#define OMAP_UART_SCR_TX_EMPTY (1 << 3) + +/* FCR register bitmasks */ +#define OMAP_UART_FCR_RX_FIFO_TRIG_MASK (0x3 << 6) +#define OMAP_UART_FCR_TX_FIFO_TRIG_MASK (0x3 << 4) + +/* MVR register bitmasks */ +#define OMAP_UART_MVR_SCHEME_SHIFT 30 + +#define OMAP_UART_LEGACY_MVR_MAJ_MASK 0xf0 +#define OMAP_UART_LEGACY_MVR_MAJ_SHIFT 4 +#define OMAP_UART_LEGACY_MVR_MIN_MASK 0x0f + +#define OMAP_UART_MVR_MAJ_MASK 0x700 +#define OMAP_UART_MVR_MAJ_SHIFT 8 +#define OMAP_UART_MVR_MIN_MASK 0x3f + +#define OMAP_UART_DMA_CH_FREE -1 + +#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA +#define OMAP_MODE13X_SPEED 230400 + +/* WER = 0x7F + * Enable module level wakeup in WER reg + */ +#define OMAP_UART_WER_MOD_WKUP 0x7F + +/* Enable XON/XOFF flow control on output */ +#define OMAP_UART_SW_TX 0x08 + +/* Enable XON/XOFF flow control on input */ +#define OMAP_UART_SW_RX 0x02 + +#define OMAP_UART_SW_CLR 0xF0 + +#define OMAP_UART_TCR_TRIG 0x0F + +struct uart_omap_dma { + u8 uart_dma_tx; + u8 uart_dma_rx; + int rx_dma_channel; + int tx_dma_channel; + dma_addr_t rx_buf_dma_phys; + dma_addr_t tx_buf_dma_phys; + unsigned int uart_base; + /* + * Buffer for rx dma. It is not required for tx because the buffer + * comes from port structure. + */ + unsigned char *rx_buf; + unsigned int prev_rx_dma_pos; + int tx_buf_size; + int tx_dma_used; + int rx_dma_used; + spinlock_t tx_lock; + spinlock_t rx_lock; + /* timer to poll activity on rx dma */ + struct timer_list rx_timer; + unsigned int rx_buf_size; + unsigned int rx_poll_rate; + unsigned int rx_timeout; +}; + +struct uart_omap_port { + struct uart_port port; + struct uart_omap_dma uart_dma; + struct device *dev; + int wakeirq; + + unsigned char ier; + unsigned char lcr; + unsigned char mcr; + unsigned char fcr; + unsigned char efr; + unsigned char dll; + unsigned char dlh; + unsigned char mdr1; + unsigned char scr; + unsigned char wer; + + int use_dma; + /* + * Some bits in registers are cleared on a read, so they must + * be saved whenever the register is read, but the bits will not + * be immediately processed. + */ + unsigned int lsr_break_flag; + unsigned char msr_saved_flags; + char name[20]; + unsigned long port_activity; + int context_loss_cnt; + u32 errata; + u32 features; + + struct gpio_desc *rts_gpiod; + + struct pm_qos_request pm_qos_request; + u32 latency; + u32 calc_latency; + struct work_struct qos_work; + bool is_suspending; + + unsigned int rs485_tx_filter_count; +}; + +#define to_uart_omap_port(p) ((container_of((p), struct uart_omap_port, port))) + +static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS]; + +/* Forward declaration of functions */ +static void serial_omap_mdr1_errataset(struct uart_omap_port *up, u8 mdr1); + +static inline unsigned int serial_in(struct uart_omap_port *up, int offset) +{ + offset <<= up->port.regshift; + return readw(up->port.membase + offset); +} + +static inline void serial_out(struct uart_omap_port *up, int offset, int value) +{ + offset <<= up->port.regshift; + writew(value, up->port.membase + offset); +} + +static inline void serial_omap_clear_fifos(struct uart_omap_port *up) +{ + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + serial_out(up, UART_FCR, 0); +} + +#ifdef CONFIG_PM +static int serial_omap_get_context_loss_count(struct uart_omap_port *up) +{ + struct omap_uart_port_info *pdata = dev_get_platdata(up->dev); + + if (!pdata || !pdata->get_context_loss_count) + return -EINVAL; + + return pdata->get_context_loss_count(up->dev); +} + +/* REVISIT: Remove this when omap3 boots in device tree only mode */ +static void serial_omap_enable_wakeup(struct uart_omap_port *up, bool enable) +{ + struct omap_uart_port_info *pdata = dev_get_platdata(up->dev); + + if (!pdata || !pdata->enable_wakeup) + return; + + pdata->enable_wakeup(up->dev, enable); +} +#endif /* CONFIG_PM */ + +/* + * Calculate the absolute difference between the desired and actual baud + * rate for the given mode. + */ +static inline int calculate_baud_abs_diff(struct uart_port *port, + unsigned int baud, unsigned int mode) +{ + unsigned int n = port->uartclk / (mode * baud); + int abs_diff; + + if (n == 0) + n = 1; + + abs_diff = baud - (port->uartclk / (mode * n)); + if (abs_diff < 0) + abs_diff = -abs_diff; + + return abs_diff; +} + +/* + * serial_omap_baud_is_mode16 - check if baud rate is MODE16X + * @port: uart port info + * @baud: baudrate for which mode needs to be determined + * + * Returns true if baud rate is MODE16X and false if MODE13X + * Original table in OMAP TRM named "UART Mode Baud Rates, Divisor Values, + * and Error Rates" determines modes not for all common baud rates. + * E.g. for 1000000 baud rate mode must be 16x, but according to that + * table it's determined as 13x. + */ +static bool +serial_omap_baud_is_mode16(struct uart_port *port, unsigned int baud) +{ + int abs_diff_13 = calculate_baud_abs_diff(port, baud, 13); + int abs_diff_16 = calculate_baud_abs_diff(port, baud, 16); + + return (abs_diff_13 >= abs_diff_16); +} + +/* + * serial_omap_get_divisor - calculate divisor value + * @port: uart port info + * @baud: baudrate for which divisor needs to be calculated. + */ +static unsigned int +serial_omap_get_divisor(struct uart_port *port, unsigned int baud) +{ + unsigned int mode; + + if (!serial_omap_baud_is_mode16(port, baud)) + mode = 13; + else + mode = 16; + return port->uartclk/(mode * baud); +} + +static void serial_omap_enable_ms(struct uart_port *port) +{ + struct uart_omap_port *up = to_uart_omap_port(port); + + dev_dbg(up->port.dev, "serial_omap_enable_ms+%d\n", up->port.line); + + pm_runtime_get_sync(up->dev); + up->ier |= UART_IER_MSI; + serial_out(up, UART_IER, up->ier); + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); +} + +static void serial_omap_stop_tx(struct uart_port *port) +{ + struct uart_omap_port *up = to_uart_omap_port(port); + int res; + + pm_runtime_get_sync(up->dev); + + /* Handle RS-485 */ + if (port->rs485.flags & SER_RS485_ENABLED) { + if (up->scr & OMAP_UART_SCR_TX_EMPTY) { + /* THR interrupt is fired when both TX FIFO and TX + * shift register are empty. This means there's nothing + * left to transmit now, so make sure the THR interrupt + * is fired when TX FIFO is below the trigger level, + * disable THR interrupts and toggle the RS-485 GPIO + * data direction pin if needed. + */ + up->scr &= ~OMAP_UART_SCR_TX_EMPTY; + serial_out(up, UART_OMAP_SCR, up->scr); + res = (port->rs485.flags & SER_RS485_RTS_AFTER_SEND) ? + 1 : 0; + if (up->rts_gpiod && + gpiod_get_value(up->rts_gpiod) != res) { + if (port->rs485.delay_rts_after_send > 0) + mdelay( + port->rs485.delay_rts_after_send); + gpiod_set_value(up->rts_gpiod, res); + } + } else { + /* We're asked to stop, but there's still stuff in the + * UART FIFO, so make sure the THR interrupt is fired + * when both TX FIFO and TX shift register are empty. + * The next THR interrupt (if no transmission is started + * in the meantime) will indicate the end of a + * transmission. Therefore we _don't_ disable THR + * interrupts in this situation. + */ + up->scr |= OMAP_UART_SCR_TX_EMPTY; + serial_out(up, UART_OMAP_SCR, up->scr); + return; + } + } + + if (up->ier & UART_IER_THRI) { + up->ier &= ~UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } + + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); +} + +static void serial_omap_stop_rx(struct uart_port *port) +{ + struct uart_omap_port *up = to_uart_omap_port(port); + + pm_runtime_get_sync(up->dev); + up->ier &= ~(UART_IER_RLSI | UART_IER_RDI); + up->port.read_status_mask &= ~UART_LSR_DR; + serial_out(up, UART_IER, up->ier); + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); +} + +static void transmit_chars(struct uart_omap_port *up, unsigned int lsr) +{ + struct circ_buf *xmit = &up->port.state->xmit; + int count; + + if (up->port.x_char) { + serial_out(up, UART_TX, up->port.x_char); + up->port.icount.tx++; + up->port.x_char = 0; + if ((up->port.rs485.flags & SER_RS485_ENABLED) && + !(up->port.rs485.flags & SER_RS485_RX_DURING_TX)) + up->rs485_tx_filter_count++; + + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { + serial_omap_stop_tx(&up->port); + return; + } + count = up->port.fifosize / 4; + do { + serial_out(up, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + if ((up->port.rs485.flags & SER_RS485_ENABLED) && + !(up->port.rs485.flags & SER_RS485_RX_DURING_TX)) + up->rs485_tx_filter_count++; + + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + if (uart_circ_empty(xmit)) + serial_omap_stop_tx(&up->port); +} + +static inline void serial_omap_enable_ier_thri(struct uart_omap_port *up) +{ + if (!(up->ier & UART_IER_THRI)) { + up->ier |= UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } +} + +static void serial_omap_start_tx(struct uart_port *port) +{ + struct uart_omap_port *up = to_uart_omap_port(port); + int res; + + pm_runtime_get_sync(up->dev); + + /* Handle RS-485 */ + if (port->rs485.flags & SER_RS485_ENABLED) { + /* Fire THR interrupts when FIFO is below trigger level */ + up->scr &= ~OMAP_UART_SCR_TX_EMPTY; + serial_out(up, UART_OMAP_SCR, up->scr); + + /* if rts not already enabled */ + res = (port->rs485.flags & SER_RS485_RTS_ON_SEND) ? 1 : 0; + if (up->rts_gpiod && gpiod_get_value(up->rts_gpiod) != res) { + gpiod_set_value(up->rts_gpiod, res); + if (port->rs485.delay_rts_before_send > 0) + mdelay(port->rs485.delay_rts_before_send); + } + } + + if ((port->rs485.flags & SER_RS485_ENABLED) && + !(port->rs485.flags & SER_RS485_RX_DURING_TX)) + up->rs485_tx_filter_count = 0; + + serial_omap_enable_ier_thri(up); + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); +} + +static void serial_omap_throttle(struct uart_port *port) +{ + struct uart_omap_port *up = to_uart_omap_port(port); + unsigned long flags; + + pm_runtime_get_sync(up->dev); + spin_lock_irqsave(&up->port.lock, flags); + up->ier &= ~(UART_IER_RLSI | UART_IER_RDI); + serial_out(up, UART_IER, up->ier); + spin_unlock_irqrestore(&up->port.lock, flags); + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); +} + +static void serial_omap_unthrottle(struct uart_port *port) +{ + struct uart_omap_port *up = to_uart_omap_port(port); + unsigned long flags; + + pm_runtime_get_sync(up->dev); + spin_lock_irqsave(&up->port.lock, flags); + up->ier |= UART_IER_RLSI | UART_IER_RDI; + serial_out(up, UART_IER, up->ier); + spin_unlock_irqrestore(&up->port.lock, flags); + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); +} + +static unsigned int check_modem_status(struct uart_omap_port *up) +{ + unsigned int status; + + status = serial_in(up, UART_MSR); + status |= up->msr_saved_flags; + up->msr_saved_flags = 0; + if ((status & UART_MSR_ANY_DELTA) == 0) + return status; + + if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI && + up->port.state != NULL) { + if (status & UART_MSR_TERI) + up->port.icount.rng++; + if (status & UART_MSR_DDSR) + up->port.icount.dsr++; + if (status & UART_MSR_DDCD) + uart_handle_dcd_change + (&up->port, status & UART_MSR_DCD); + if (status & UART_MSR_DCTS) + uart_handle_cts_change + (&up->port, status & UART_MSR_CTS); + wake_up_interruptible(&up->port.state->port.delta_msr_wait); + } + + return status; +} + +static void serial_omap_rlsi(struct uart_omap_port *up, unsigned int lsr) +{ + unsigned int flag; + + /* + * Read one data character out to avoid stalling the receiver according + * to the table 23-246 of the omap4 TRM. + */ + if (likely(lsr & UART_LSR_DR)) { + serial_in(up, UART_RX); + if ((up->port.rs485.flags & SER_RS485_ENABLED) && + !(up->port.rs485.flags & SER_RS485_RX_DURING_TX) && + up->rs485_tx_filter_count) + up->rs485_tx_filter_count--; + } + + up->port.icount.rx++; + flag = TTY_NORMAL; + + if (lsr & UART_LSR_BI) { + flag = TTY_BREAK; + lsr &= ~(UART_LSR_FE | UART_LSR_PE); + up->port.icount.brk++; + /* + * We do the SysRQ and SAK checking + * here because otherwise the break + * may get masked by ignore_status_mask + * or read_status_mask. + */ + if (uart_handle_break(&up->port)) + return; + + } + + if (lsr & UART_LSR_PE) { + flag = TTY_PARITY; + up->port.icount.parity++; + } + + if (lsr & UART_LSR_FE) { + flag = TTY_FRAME; + up->port.icount.frame++; + } + + if (lsr & UART_LSR_OE) + up->port.icount.overrun++; + +#ifdef CONFIG_SERIAL_OMAP_CONSOLE + if (up->port.line == up->port.cons->index) { + /* Recover the break flag from console xmit */ + lsr |= up->lsr_break_flag; + } +#endif + uart_insert_char(&up->port, lsr, UART_LSR_OE, 0, flag); +} + +static void serial_omap_rdi(struct uart_omap_port *up, unsigned int lsr) +{ + unsigned char ch = 0; + unsigned int flag; + + if (!(lsr & UART_LSR_DR)) + return; + + ch = serial_in(up, UART_RX); + if ((up->port.rs485.flags & SER_RS485_ENABLED) && + !(up->port.rs485.flags & SER_RS485_RX_DURING_TX) && + up->rs485_tx_filter_count) { + up->rs485_tx_filter_count--; + return; + } + + flag = TTY_NORMAL; + up->port.icount.rx++; + + if (uart_handle_sysrq_char(&up->port, ch)) + return; + + uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag); +} + +/** + * serial_omap_irq() - This handles the interrupt from one port + * @irq: uart port irq number + * @dev_id: uart port info + */ +static irqreturn_t serial_omap_irq(int irq, void *dev_id) +{ + struct uart_omap_port *up = dev_id; + unsigned int iir, lsr; + unsigned int type; + irqreturn_t ret = IRQ_NONE; + int max_count = 256; + + spin_lock(&up->port.lock); + pm_runtime_get_sync(up->dev); + + do { + iir = serial_in(up, UART_IIR); + if (iir & UART_IIR_NO_INT) + break; + + ret = IRQ_HANDLED; + lsr = serial_in(up, UART_LSR); + + /* extract IRQ type from IIR register */ + type = iir & 0x3e; + + switch (type) { + case UART_IIR_MSI: + check_modem_status(up); + break; + case UART_IIR_THRI: + transmit_chars(up, lsr); + break; + case UART_IIR_RX_TIMEOUT: + case UART_IIR_RDI: + serial_omap_rdi(up, lsr); + break; + case UART_IIR_RLSI: + serial_omap_rlsi(up, lsr); + break; + case UART_IIR_CTS_RTS_DSR: + /* simply try again */ + break; + case UART_IIR_XOFF: + default: + break; + } + } while (max_count--); + + spin_unlock(&up->port.lock); + + tty_flip_buffer_push(&up->port.state->port); + + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); + up->port_activity = jiffies; + + return ret; +} + +static unsigned int serial_omap_tx_empty(struct uart_port *port) +{ + struct uart_omap_port *up = to_uart_omap_port(port); + unsigned long flags = 0; + unsigned int ret = 0; + + pm_runtime_get_sync(up->dev); + dev_dbg(up->port.dev, "serial_omap_tx_empty+%d\n", up->port.line); + spin_lock_irqsave(&up->port.lock, flags); + ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; + spin_unlock_irqrestore(&up->port.lock, flags); + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); + return ret; +} + +static unsigned int serial_omap_get_mctrl(struct uart_port *port) +{ + struct uart_omap_port *up = to_uart_omap_port(port); + unsigned int status; + unsigned int ret = 0; + + pm_runtime_get_sync(up->dev); + status = check_modem_status(up); + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); + + dev_dbg(up->port.dev, "serial_omap_get_mctrl+%d\n", up->port.line); + + if (status & UART_MSR_DCD) + ret |= TIOCM_CAR; + if (status & UART_MSR_RI) + ret |= TIOCM_RNG; + if (status & UART_MSR_DSR) + ret |= TIOCM_DSR; + if (status & UART_MSR_CTS) + ret |= TIOCM_CTS; + return ret; +} + +static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_omap_port *up = to_uart_omap_port(port); + unsigned char mcr = 0, old_mcr, lcr; + + dev_dbg(up->port.dev, "serial_omap_set_mctrl+%d\n", up->port.line); + if (mctrl & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (mctrl & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (mctrl & TIOCM_OUT1) + mcr |= UART_MCR_OUT1; + if (mctrl & TIOCM_OUT2) + mcr |= UART_MCR_OUT2; + if (mctrl & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + pm_runtime_get_sync(up->dev); + old_mcr = serial_in(up, UART_MCR); + old_mcr &= ~(UART_MCR_LOOP | UART_MCR_OUT2 | UART_MCR_OUT1 | + UART_MCR_DTR | UART_MCR_RTS); + up->mcr = old_mcr | mcr; + serial_out(up, UART_MCR, up->mcr); + + /* Turn off autoRTS if RTS is lowered; restore autoRTS if RTS raised */ + lcr = serial_in(up, UART_LCR); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + if ((mctrl & TIOCM_RTS) && (port->status & UPSTAT_AUTORTS)) + up->efr |= UART_EFR_RTS; + else + up->efr &= ~UART_EFR_RTS; + serial_out(up, UART_EFR, up->efr); + serial_out(up, UART_LCR, lcr); + + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); +} + +static void serial_omap_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_omap_port *up = to_uart_omap_port(port); + unsigned long flags = 0; + + dev_dbg(up->port.dev, "serial_omap_break_ctl+%d\n", up->port.line); + pm_runtime_get_sync(up->dev); + spin_lock_irqsave(&up->port.lock, flags); + if (break_state == -1) + up->lcr |= UART_LCR_SBC; + else + up->lcr &= ~UART_LCR_SBC; + serial_out(up, UART_LCR, up->lcr); + spin_unlock_irqrestore(&up->port.lock, flags); + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); +} + +static int serial_omap_startup(struct uart_port *port) +{ + struct uart_omap_port *up = to_uart_omap_port(port); + unsigned long flags = 0; + int retval; + + /* + * Allocate the IRQ + */ + retval = request_irq(up->port.irq, serial_omap_irq, up->port.irqflags, + up->name, up); + if (retval) + return retval; + + /* Optional wake-up IRQ */ + if (up->wakeirq) { + retval = dev_pm_set_dedicated_wake_irq(up->dev, up->wakeirq); + if (retval) { + free_irq(up->port.irq, up); + return retval; + } + } + + dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->port.line); + + pm_runtime_get_sync(up->dev); + /* + * Clear the FIFO buffers and disable them. + * (they will be reenabled in set_termios()) + */ + serial_omap_clear_fifos(up); + + /* + * Clear the interrupt registers. + */ + (void) serial_in(up, UART_LSR); + if (serial_in(up, UART_LSR) & UART_LSR_DR) + (void) serial_in(up, UART_RX); + (void) serial_in(up, UART_IIR); + (void) serial_in(up, UART_MSR); + + /* + * Now, initialize the UART + */ + serial_out(up, UART_LCR, UART_LCR_WLEN8); + spin_lock_irqsave(&up->port.lock, flags); + /* + * Most PC uarts need OUT2 raised to enable interrupts. + */ + up->port.mctrl |= TIOCM_OUT2; + serial_omap_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + up->msr_saved_flags = 0; + /* + * Finally, enable interrupts. Note: Modem status interrupts + * are set via set_termios(), which will be occurring imminently + * anyway, so we don't enable them here. + */ + up->ier = UART_IER_RLSI | UART_IER_RDI; + serial_out(up, UART_IER, up->ier); + + /* Enable module level wake up */ + up->wer = OMAP_UART_WER_MOD_WKUP; + if (up->features & OMAP_UART_WER_HAS_TX_WAKEUP) + up->wer |= OMAP_UART_TX_WAKEUP_EN; + + serial_out(up, UART_OMAP_WER, up->wer); + + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); + up->port_activity = jiffies; + return 0; +} + +static void serial_omap_shutdown(struct uart_port *port) +{ + struct uart_omap_port *up = to_uart_omap_port(port); + unsigned long flags = 0; + + dev_dbg(up->port.dev, "serial_omap_shutdown+%d\n", up->port.line); + + pm_runtime_get_sync(up->dev); + /* + * Disable interrupts from this port + */ + up->ier = 0; + serial_out(up, UART_IER, 0); + + spin_lock_irqsave(&up->port.lock, flags); + up->port.mctrl &= ~TIOCM_OUT2; + serial_omap_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * Disable break condition and FIFOs + */ + serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC); + serial_omap_clear_fifos(up); + + /* + * Read data port to reset things, and then free the irq + */ + if (serial_in(up, UART_LSR) & UART_LSR_DR) + (void) serial_in(up, UART_RX); + + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); + free_irq(up->port.irq, up); + dev_pm_clear_wake_irq(up->dev); +} + +static void serial_omap_uart_qos_work(struct work_struct *work) +{ + struct uart_omap_port *up = container_of(work, struct uart_omap_port, + qos_work); + + cpu_latency_qos_update_request(&up->pm_qos_request, up->latency); +} + +static void +serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_omap_port *up = to_uart_omap_port(port); + unsigned char cval = 0; + unsigned long flags = 0; + unsigned int baud, quot; + + switch (termios->c_cflag & CSIZE) { + case CS5: + cval = UART_LCR_WLEN5; + break; + case CS6: + cval = UART_LCR_WLEN6; + break; + case CS7: + cval = UART_LCR_WLEN7; + break; + default: + case CS8: + cval = UART_LCR_WLEN8; + break; + } + + if (termios->c_cflag & CSTOPB) + cval |= UART_LCR_STOP; + if (termios->c_cflag & PARENB) + cval |= UART_LCR_PARITY; + if (!(termios->c_cflag & PARODD)) + cval |= UART_LCR_EPAR; + if (termios->c_cflag & CMSPAR) + cval |= UART_LCR_SPAR; + + /* + * Ask the core to calculate the divisor for us. + */ + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/13); + quot = serial_omap_get_divisor(port, baud); + + /* calculate wakeup latency constraint */ + up->calc_latency = (USEC_PER_SEC * up->port.fifosize) / (baud / 8); + up->latency = up->calc_latency; + schedule_work(&up->qos_work); + + up->dll = quot & 0xff; + up->dlh = quot >> 8; + up->mdr1 = UART_OMAP_MDR1_DISABLE; + + up->fcr = UART_FCR_R_TRIG_01 | UART_FCR_T_TRIG_01 | + UART_FCR_ENABLE_FIFO; + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + pm_runtime_get_sync(up->dev); + spin_lock_irqsave(&up->port.lock, flags); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + if (termios->c_iflag & INPCK) + up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (termios->c_iflag & (BRKINT | PARMRK)) + up->port.read_status_mask |= UART_LSR_BI; + + /* + * Characters to ignore + */ + up->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; + if (termios->c_iflag & IGNBRK) { + up->port.ignore_status_mask |= UART_LSR_BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_OE; + } + + /* + * ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + up->port.ignore_status_mask |= UART_LSR_DR; + + /* + * Modem status interrupts + */ + up->ier &= ~UART_IER_MSI; + if (UART_ENABLE_MS(&up->port, termios->c_cflag)) + up->ier |= UART_IER_MSI; + serial_out(up, UART_IER, up->ier); + serial_out(up, UART_LCR, cval); /* reset DLAB */ + up->lcr = cval; + up->scr = 0; + + /* FIFOs and DMA Settings */ + + /* FCR can be changed only when the + * baud clock is not running + * DLL_REG and DLH_REG set to 0. + */ + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); + serial_out(up, UART_DLL, 0); + serial_out(up, UART_DLM, 0); + serial_out(up, UART_LCR, 0); + + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + + up->efr = serial_in(up, UART_EFR) & ~UART_EFR_ECB; + up->efr &= ~UART_EFR_SCD; + serial_out(up, UART_EFR, up->efr | UART_EFR_ECB); + + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); + up->mcr = serial_in(up, UART_MCR) & ~UART_MCR_TCRTLR; + serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR); + /* FIFO ENABLE, DMA MODE */ + + up->scr |= OMAP_UART_SCR_RX_TRIG_GRANU1_MASK; + /* + * NOTE: Setting OMAP_UART_SCR_RX_TRIG_GRANU1_MASK + * sets Enables the granularity of 1 for TRIGGER RX + * level. Along with setting RX FIFO trigger level + * to 1 (as noted below, 16 characters) and TLR[3:0] + * to zero this will result RX FIFO threshold level + * to 1 character, instead of 16 as noted in comment + * below. + */ + + /* Set receive FIFO threshold to 16 characters and + * transmit FIFO threshold to 32 spaces + */ + up->fcr &= ~OMAP_UART_FCR_RX_FIFO_TRIG_MASK; + up->fcr &= ~OMAP_UART_FCR_TX_FIFO_TRIG_MASK; + up->fcr |= UART_FCR6_R_TRIGGER_16 | UART_FCR6_T_TRIGGER_24 | + UART_FCR_ENABLE_FIFO; + + serial_out(up, UART_FCR, up->fcr); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + + serial_out(up, UART_OMAP_SCR, up->scr); + + /* Reset UART_MCR_TCRTLR: this must be done with the EFR_ECB bit set */ + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); + serial_out(up, UART_MCR, up->mcr); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_out(up, UART_EFR, up->efr); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); + + /* Protocol, Baud Rate, and Interrupt Settings */ + + if (up->errata & UART_ERRATA_i202_MDR1_ACCESS) + serial_omap_mdr1_errataset(up, up->mdr1); + else + serial_out(up, UART_OMAP_MDR1, up->mdr1); + + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_out(up, UART_EFR, up->efr | UART_EFR_ECB); + + serial_out(up, UART_LCR, 0); + serial_out(up, UART_IER, 0); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + + serial_out(up, UART_DLL, up->dll); /* LS of divisor */ + serial_out(up, UART_DLM, up->dlh); /* MS of divisor */ + + serial_out(up, UART_LCR, 0); + serial_out(up, UART_IER, up->ier); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + + serial_out(up, UART_EFR, up->efr); + serial_out(up, UART_LCR, cval); + + if (!serial_omap_baud_is_mode16(port, baud)) + up->mdr1 = UART_OMAP_MDR1_13X_MODE; + else + up->mdr1 = UART_OMAP_MDR1_16X_MODE; + + if (up->errata & UART_ERRATA_i202_MDR1_ACCESS) + serial_omap_mdr1_errataset(up, up->mdr1); + else + serial_out(up, UART_OMAP_MDR1, up->mdr1); + + /* Configure flow control */ + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + + /* XON1/XOFF1 accessible mode B, TCRTLR=0, ECB=0 */ + serial_out(up, UART_XON1, termios->c_cc[VSTART]); + serial_out(up, UART_XOFF1, termios->c_cc[VSTOP]); + + /* Enable access to TCR/TLR */ + serial_out(up, UART_EFR, up->efr | UART_EFR_ECB); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); + serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR); + + serial_out(up, UART_TI752_TCR, OMAP_UART_TCR_TRIG); + + up->port.status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS | UPSTAT_AUTOXOFF); + + if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW) { + /* Enable AUTOCTS (autoRTS is enabled when RTS is raised) */ + up->port.status |= UPSTAT_AUTOCTS | UPSTAT_AUTORTS; + up->efr |= UART_EFR_CTS; + } else { + /* Disable AUTORTS and AUTOCTS */ + up->efr &= ~(UART_EFR_CTS | UART_EFR_RTS); + } + + if (up->port.flags & UPF_SOFT_FLOW) { + /* clear SW control mode bits */ + up->efr &= OMAP_UART_SW_CLR; + + /* + * IXON Flag: + * Enable XON/XOFF flow control on input. + * Receiver compares XON1, XOFF1. + */ + if (termios->c_iflag & IXON) + up->efr |= OMAP_UART_SW_RX; + + /* + * IXOFF Flag: + * Enable XON/XOFF flow control on output. + * Transmit XON1, XOFF1 + */ + if (termios->c_iflag & IXOFF) { + up->port.status |= UPSTAT_AUTOXOFF; + up->efr |= OMAP_UART_SW_TX; + } + + /* + * IXANY Flag: + * Enable any character to restart output. + * Operation resumes after receiving any + * character after recognition of the XOFF character + */ + if (termios->c_iflag & IXANY) + up->mcr |= UART_MCR_XONANY; + else + up->mcr &= ~UART_MCR_XONANY; + } + serial_out(up, UART_MCR, up->mcr); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_out(up, UART_EFR, up->efr); + serial_out(up, UART_LCR, up->lcr); + + serial_omap_set_mctrl(&up->port, up->port.mctrl); + + spin_unlock_irqrestore(&up->port.lock, flags); + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); + dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->port.line); +} + +static void +serial_omap_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct uart_omap_port *up = to_uart_omap_port(port); + unsigned char efr; + + dev_dbg(up->port.dev, "serial_omap_pm+%d\n", up->port.line); + + pm_runtime_get_sync(up->dev); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + efr = serial_in(up, UART_EFR); + serial_out(up, UART_EFR, efr | UART_EFR_ECB); + serial_out(up, UART_LCR, 0); + + serial_out(up, UART_IER, (state != 0) ? UART_IERX_SLEEP : 0); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_out(up, UART_EFR, efr); + serial_out(up, UART_LCR, 0); + + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); +} + +static void serial_omap_release_port(struct uart_port *port) +{ + dev_dbg(port->dev, "serial_omap_release_port+\n"); +} + +static int serial_omap_request_port(struct uart_port *port) +{ + dev_dbg(port->dev, "serial_omap_request_port+\n"); + return 0; +} + +static void serial_omap_config_port(struct uart_port *port, int flags) +{ + struct uart_omap_port *up = to_uart_omap_port(port); + + dev_dbg(up->port.dev, "serial_omap_config_port+%d\n", + up->port.line); + up->port.type = PORT_OMAP; + up->port.flags |= UPF_SOFT_FLOW | UPF_HARD_FLOW; +} + +static int +serial_omap_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + /* we don't want the core code to modify any port params */ + dev_dbg(port->dev, "serial_omap_verify_port+\n"); + return -EINVAL; +} + +static const char * +serial_omap_type(struct uart_port *port) +{ + struct uart_omap_port *up = to_uart_omap_port(port); + + dev_dbg(up->port.dev, "serial_omap_type+%d\n", up->port.line); + return up->name; +} + +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +static void __maybe_unused wait_for_xmitr(struct uart_omap_port *up) +{ + unsigned int status, tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + do { + status = serial_in(up, UART_LSR); + + if (status & UART_LSR_BI) + up->lsr_break_flag = UART_LSR_BI; + + if (--tmout == 0) + break; + udelay(1); + } while ((status & BOTH_EMPTY) != BOTH_EMPTY); + + /* Wait up to 1s for flow control if necessary */ + if (up->port.flags & UPF_CONS_FLOW) { + tmout = 1000000; + for (tmout = 1000000; tmout; tmout--) { + unsigned int msr = serial_in(up, UART_MSR); + + up->msr_saved_flags |= msr & MSR_SAVE_FLAGS; + if (msr & UART_MSR_CTS) + break; + + udelay(1); + } + } +} + +#ifdef CONFIG_CONSOLE_POLL + +static void serial_omap_poll_put_char(struct uart_port *port, unsigned char ch) +{ + struct uart_omap_port *up = to_uart_omap_port(port); + + pm_runtime_get_sync(up->dev); + wait_for_xmitr(up); + serial_out(up, UART_TX, ch); + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); +} + +static int serial_omap_poll_get_char(struct uart_port *port) +{ + struct uart_omap_port *up = to_uart_omap_port(port); + unsigned int status; + + pm_runtime_get_sync(up->dev); + status = serial_in(up, UART_LSR); + if (!(status & UART_LSR_DR)) { + status = NO_POLL_CHAR; + goto out; + } + + status = serial_in(up, UART_RX); + +out: + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); + + return status; +} + +#endif /* CONFIG_CONSOLE_POLL */ + +#ifdef CONFIG_SERIAL_OMAP_CONSOLE + +#ifdef CONFIG_SERIAL_EARLYCON +static unsigned int omap_serial_early_in(struct uart_port *port, int offset) +{ + offset <<= port->regshift; + return readw(port->membase + offset); +} + +static void omap_serial_early_out(struct uart_port *port, int offset, + int value) +{ + offset <<= port->regshift; + writew(value, port->membase + offset); +} + +static void omap_serial_early_putc(struct uart_port *port, int c) +{ + unsigned int status; + + for (;;) { + status = omap_serial_early_in(port, UART_LSR); + if ((status & BOTH_EMPTY) == BOTH_EMPTY) + break; + cpu_relax(); + } + omap_serial_early_out(port, UART_TX, c); +} + +static void early_omap_serial_write(struct console *console, const char *s, + unsigned int count) +{ + struct earlycon_device *device = console->data; + struct uart_port *port = &device->port; + + uart_console_write(port, s, count, omap_serial_early_putc); +} + +static int __init early_omap_serial_setup(struct earlycon_device *device, + const char *options) +{ + struct uart_port *port = &device->port; + + if (!(device->port.membase || device->port.iobase)) + return -ENODEV; + + port->regshift = 2; + device->con->write = early_omap_serial_write; + return 0; +} + +OF_EARLYCON_DECLARE(omapserial, "ti,omap2-uart", early_omap_serial_setup); +OF_EARLYCON_DECLARE(omapserial, "ti,omap3-uart", early_omap_serial_setup); +OF_EARLYCON_DECLARE(omapserial, "ti,omap4-uart", early_omap_serial_setup); +#endif /* CONFIG_SERIAL_EARLYCON */ + +static struct uart_omap_port *serial_omap_console_ports[OMAP_MAX_HSUART_PORTS]; + +static struct uart_driver serial_omap_reg; + +static void serial_omap_console_putchar(struct uart_port *port, int ch) +{ + struct uart_omap_port *up = to_uart_omap_port(port); + + wait_for_xmitr(up); + serial_out(up, UART_TX, ch); +} + +static void +serial_omap_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_omap_port *up = serial_omap_console_ports[co->index]; + unsigned long flags; + unsigned int ier; + int locked = 1; + + pm_runtime_get_sync(up->dev); + + local_irq_save(flags); + if (up->port.sysrq) + locked = 0; + else if (oops_in_progress) + locked = spin_trylock(&up->port.lock); + else + spin_lock(&up->port.lock); + + /* + * First save the IER then disable the interrupts + */ + ier = serial_in(up, UART_IER); + serial_out(up, UART_IER, 0); + + uart_console_write(&up->port, s, count, serial_omap_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up); + serial_out(up, UART_IER, ier); + /* + * The receive handling will happen properly because the + * receive ready bit will still be set; it is not cleared + * on read. However, modem control will not, we must + * call it if we have saved something in the saved flags + * while processing with interrupts off. + */ + if (up->msr_saved_flags) + check_modem_status(up); + + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); + if (locked) + spin_unlock(&up->port.lock); + local_irq_restore(flags); +} + +static int __init +serial_omap_console_setup(struct console *co, char *options) +{ + struct uart_omap_port *up; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (serial_omap_console_ports[co->index] == NULL) + return -ENODEV; + up = serial_omap_console_ports[co->index]; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&up->port, co, baud, parity, bits, flow); +} + +static struct console serial_omap_console = { + .name = OMAP_SERIAL_NAME, + .write = serial_omap_console_write, + .device = uart_console_device, + .setup = serial_omap_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &serial_omap_reg, +}; + +static void serial_omap_add_console_port(struct uart_omap_port *up) +{ + serial_omap_console_ports[up->port.line] = up; +} + +#define OMAP_CONSOLE (&serial_omap_console) + +#else + +#define OMAP_CONSOLE NULL + +static inline void serial_omap_add_console_port(struct uart_omap_port *up) +{} + +#endif + +/* Enable or disable the rs485 support */ +static int +serial_omap_config_rs485(struct uart_port *port, struct serial_rs485 *rs485) +{ + struct uart_omap_port *up = to_uart_omap_port(port); + unsigned int mode; + int val; + + pm_runtime_get_sync(up->dev); + + /* Disable interrupts from this port */ + mode = up->ier; + up->ier = 0; + serial_out(up, UART_IER, 0); + + /* Clamp the delays to [0, 100ms] */ + rs485->delay_rts_before_send = min(rs485->delay_rts_before_send, 100U); + rs485->delay_rts_after_send = min(rs485->delay_rts_after_send, 100U); + + /* store new config */ + port->rs485 = *rs485; + + if (up->rts_gpiod) { + /* enable / disable rts */ + val = (port->rs485.flags & SER_RS485_ENABLED) ? + SER_RS485_RTS_AFTER_SEND : SER_RS485_RTS_ON_SEND; + val = (port->rs485.flags & val) ? 1 : 0; + gpiod_set_value(up->rts_gpiod, val); + } + + /* Enable interrupts */ + up->ier = mode; + serial_out(up, UART_IER, up->ier); + + /* If RS-485 is disabled, make sure the THR interrupt is fired when + * TX FIFO is below the trigger level. + */ + if (!(port->rs485.flags & SER_RS485_ENABLED) && + (up->scr & OMAP_UART_SCR_TX_EMPTY)) { + up->scr &= ~OMAP_UART_SCR_TX_EMPTY; + serial_out(up, UART_OMAP_SCR, up->scr); + } + + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); + + return 0; +} + +static const struct uart_ops serial_omap_pops = { + .tx_empty = serial_omap_tx_empty, + .set_mctrl = serial_omap_set_mctrl, + .get_mctrl = serial_omap_get_mctrl, + .stop_tx = serial_omap_stop_tx, + .start_tx = serial_omap_start_tx, + .throttle = serial_omap_throttle, + .unthrottle = serial_omap_unthrottle, + .stop_rx = serial_omap_stop_rx, + .enable_ms = serial_omap_enable_ms, + .break_ctl = serial_omap_break_ctl, + .startup = serial_omap_startup, + .shutdown = serial_omap_shutdown, + .set_termios = serial_omap_set_termios, + .pm = serial_omap_pm, + .type = serial_omap_type, + .release_port = serial_omap_release_port, + .request_port = serial_omap_request_port, + .config_port = serial_omap_config_port, + .verify_port = serial_omap_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_put_char = serial_omap_poll_put_char, + .poll_get_char = serial_omap_poll_get_char, +#endif +}; + +static struct uart_driver serial_omap_reg = { + .owner = THIS_MODULE, + .driver_name = "OMAP-SERIAL", + .dev_name = OMAP_SERIAL_NAME, + .nr = OMAP_MAX_HSUART_PORTS, + .cons = OMAP_CONSOLE, +}; + +#ifdef CONFIG_PM_SLEEP +static int serial_omap_prepare(struct device *dev) +{ + struct uart_omap_port *up = dev_get_drvdata(dev); + + up->is_suspending = true; + + return 0; +} + +static void serial_omap_complete(struct device *dev) +{ + struct uart_omap_port *up = dev_get_drvdata(dev); + + up->is_suspending = false; +} + +static int serial_omap_suspend(struct device *dev) +{ + struct uart_omap_port *up = dev_get_drvdata(dev); + + uart_suspend_port(&serial_omap_reg, &up->port); + flush_work(&up->qos_work); + + if (device_may_wakeup(dev)) + serial_omap_enable_wakeup(up, true); + else + serial_omap_enable_wakeup(up, false); + + return 0; +} + +static int serial_omap_resume(struct device *dev) +{ + struct uart_omap_port *up = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) + serial_omap_enable_wakeup(up, false); + + uart_resume_port(&serial_omap_reg, &up->port); + + return 0; +} +#else +#define serial_omap_prepare NULL +#define serial_omap_complete NULL +#endif /* CONFIG_PM_SLEEP */ + +static void omap_serial_fill_features_erratas(struct uart_omap_port *up) +{ + u32 mvr, scheme; + u16 revision, major, minor; + + mvr = readl(up->port.membase + (UART_OMAP_MVER << up->port.regshift)); + + /* Check revision register scheme */ + scheme = mvr >> OMAP_UART_MVR_SCHEME_SHIFT; + + switch (scheme) { + case 0: /* Legacy Scheme: OMAP2/3 */ + /* MINOR_REV[0:4], MAJOR_REV[4:7] */ + major = (mvr & OMAP_UART_LEGACY_MVR_MAJ_MASK) >> + OMAP_UART_LEGACY_MVR_MAJ_SHIFT; + minor = (mvr & OMAP_UART_LEGACY_MVR_MIN_MASK); + break; + case 1: + /* New Scheme: OMAP4+ */ + /* MINOR_REV[0:5], MAJOR_REV[8:10] */ + major = (mvr & OMAP_UART_MVR_MAJ_MASK) >> + OMAP_UART_MVR_MAJ_SHIFT; + minor = (mvr & OMAP_UART_MVR_MIN_MASK); + break; + default: + dev_warn(up->dev, + "Unknown %s revision, defaulting to highest\n", + up->name); + /* highest possible revision */ + major = 0xff; + minor = 0xff; + } + + /* normalize revision for the driver */ + revision = UART_BUILD_REVISION(major, minor); + + switch (revision) { + case OMAP_UART_REV_46: + up->errata |= (UART_ERRATA_i202_MDR1_ACCESS | + UART_ERRATA_i291_DMA_FORCEIDLE); + break; + case OMAP_UART_REV_52: + up->errata |= (UART_ERRATA_i202_MDR1_ACCESS | + UART_ERRATA_i291_DMA_FORCEIDLE); + up->features |= OMAP_UART_WER_HAS_TX_WAKEUP; + break; + case OMAP_UART_REV_63: + up->errata |= UART_ERRATA_i202_MDR1_ACCESS; + up->features |= OMAP_UART_WER_HAS_TX_WAKEUP; + break; + default: + break; + } +} + +static struct omap_uart_port_info *of_get_uart_port_info(struct device *dev) +{ + struct omap_uart_port_info *omap_up_info; + + omap_up_info = devm_kzalloc(dev, sizeof(*omap_up_info), GFP_KERNEL); + if (!omap_up_info) + return NULL; /* out of memory */ + + of_property_read_u32(dev->of_node, "clock-frequency", + &omap_up_info->uartclk); + + omap_up_info->flags = UPF_BOOT_AUTOCONF; + + return omap_up_info; +} + +static int serial_omap_probe_rs485(struct uart_omap_port *up, + struct device *dev) +{ + struct serial_rs485 *rs485conf = &up->port.rs485; + struct device_node *np = dev->of_node; + enum gpiod_flags gflags; + int ret; + + rs485conf->flags = 0; + up->rts_gpiod = NULL; + + if (!np) + return 0; + + ret = uart_get_rs485_mode(&up->port); + if (ret) + return ret; + + if (of_property_read_bool(np, "rs485-rts-active-high")) { + rs485conf->flags |= SER_RS485_RTS_ON_SEND; + rs485conf->flags &= ~SER_RS485_RTS_AFTER_SEND; + } else { + rs485conf->flags &= ~SER_RS485_RTS_ON_SEND; + rs485conf->flags |= SER_RS485_RTS_AFTER_SEND; + } + + /* check for tx enable gpio */ + gflags = rs485conf->flags & SER_RS485_RTS_AFTER_SEND ? + GPIOD_OUT_HIGH : GPIOD_OUT_LOW; + up->rts_gpiod = devm_gpiod_get_optional(dev, "rts", gflags); + if (IS_ERR(up->rts_gpiod)) { + ret = PTR_ERR(up->rts_gpiod); + if (ret == -EPROBE_DEFER) + return ret; + /* + * FIXME: the code historically ignored any other error than + * -EPROBE_DEFER and just went on without GPIO. + */ + up->rts_gpiod = NULL; + } else { + gpiod_set_consumer_name(up->rts_gpiod, "omap-serial"); + } + + return 0; +} + +static int serial_omap_probe(struct platform_device *pdev) +{ + struct omap_uart_port_info *omap_up_info = dev_get_platdata(&pdev->dev); + struct uart_omap_port *up; + struct resource *mem; + void __iomem *base; + int uartirq = 0; + int wakeirq = 0; + int ret; + + /* The optional wakeirq may be specified in the board dts file */ + if (pdev->dev.of_node) { + uartirq = irq_of_parse_and_map(pdev->dev.of_node, 0); + if (!uartirq) + return -EPROBE_DEFER; + wakeirq = irq_of_parse_and_map(pdev->dev.of_node, 1); + omap_up_info = of_get_uart_port_info(&pdev->dev); + pdev->dev.platform_data = omap_up_info; + } else { + uartirq = platform_get_irq(pdev, 0); + if (uartirq < 0) + return -EPROBE_DEFER; + } + + up = devm_kzalloc(&pdev->dev, sizeof(*up), GFP_KERNEL); + if (!up) + return -ENOMEM; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(&pdev->dev, mem); + if (IS_ERR(base)) + return PTR_ERR(base); + + up->dev = &pdev->dev; + up->port.dev = &pdev->dev; + up->port.type = PORT_OMAP; + up->port.iotype = UPIO_MEM; + up->port.irq = uartirq; + up->port.regshift = 2; + up->port.fifosize = 64; + up->port.ops = &serial_omap_pops; + up->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_OMAP_CONSOLE); + + if (pdev->dev.of_node) + ret = of_alias_get_id(pdev->dev.of_node, "serial"); + else + ret = pdev->id; + + if (ret < 0) { + dev_err(&pdev->dev, "failed to get alias/pdev id, errno %d\n", + ret); + goto err_port_line; + } + up->port.line = ret; + + if (up->port.line >= OMAP_MAX_HSUART_PORTS) { + dev_err(&pdev->dev, "uart ID %d > MAX %d.\n", up->port.line, + OMAP_MAX_HSUART_PORTS); + ret = -ENXIO; + goto err_port_line; + } + + up->wakeirq = wakeirq; + if (!up->wakeirq) + dev_info(up->port.dev, "no wakeirq for uart%d\n", + up->port.line); + + ret = serial_omap_probe_rs485(up, &pdev->dev); + if (ret < 0) + goto err_rs485; + + sprintf(up->name, "OMAP UART%d", up->port.line); + up->port.mapbase = mem->start; + up->port.membase = base; + up->port.flags = omap_up_info->flags; + up->port.uartclk = omap_up_info->uartclk; + up->port.rs485_config = serial_omap_config_rs485; + if (!up->port.uartclk) { + up->port.uartclk = DEFAULT_CLK_SPEED; + dev_warn(&pdev->dev, + "No clock speed specified: using default: %d\n", + DEFAULT_CLK_SPEED); + } + + up->latency = PM_QOS_CPU_LATENCY_DEFAULT_VALUE; + up->calc_latency = PM_QOS_CPU_LATENCY_DEFAULT_VALUE; + cpu_latency_qos_add_request(&up->pm_qos_request, up->latency); + INIT_WORK(&up->qos_work, serial_omap_uart_qos_work); + + platform_set_drvdata(pdev, up); + if (omap_up_info->autosuspend_timeout == 0) + omap_up_info->autosuspend_timeout = -1; + + device_init_wakeup(up->dev, true); + pm_runtime_use_autosuspend(&pdev->dev); + pm_runtime_set_autosuspend_delay(&pdev->dev, + omap_up_info->autosuspend_timeout); + + pm_runtime_irq_safe(&pdev->dev); + pm_runtime_enable(&pdev->dev); + + pm_runtime_get_sync(&pdev->dev); + + omap_serial_fill_features_erratas(up); + + ui[up->port.line] = up; + serial_omap_add_console_port(up); + + ret = uart_add_one_port(&serial_omap_reg, &up->port); + if (ret != 0) + goto err_add_port; + + pm_runtime_mark_last_busy(up->dev); + pm_runtime_put_autosuspend(up->dev); + return 0; + +err_add_port: + pm_runtime_dont_use_autosuspend(&pdev->dev); + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + cpu_latency_qos_remove_request(&up->pm_qos_request); + device_init_wakeup(up->dev, false); +err_rs485: +err_port_line: + return ret; +} + +static int serial_omap_remove(struct platform_device *dev) +{ + struct uart_omap_port *up = platform_get_drvdata(dev); + + pm_runtime_get_sync(up->dev); + + uart_remove_one_port(&serial_omap_reg, &up->port); + + pm_runtime_dont_use_autosuspend(up->dev); + pm_runtime_put_sync(up->dev); + pm_runtime_disable(up->dev); + cpu_latency_qos_remove_request(&up->pm_qos_request); + device_init_wakeup(&dev->dev, false); + + return 0; +} + +/* + * Work Around for Errata i202 (2430, 3430, 3630, 4430 and 4460) + * The access to uart register after MDR1 Access + * causes UART to corrupt data. + * + * Need a delay = + * 5 L4 clock cycles + 5 UART functional clock cycle (@48MHz = ~0.2uS) + * give 10 times as much + */ +static void serial_omap_mdr1_errataset(struct uart_omap_port *up, u8 mdr1) +{ + u8 timeout = 255; + + serial_out(up, UART_OMAP_MDR1, mdr1); + udelay(2); + serial_out(up, UART_FCR, up->fcr | UART_FCR_CLEAR_XMIT | + UART_FCR_CLEAR_RCVR); + /* + * Wait for FIFO to empty: when empty, RX_FIFO_E bit is 0 and + * TX_FIFO_E bit is 1. + */ + while (UART_LSR_THRE != (serial_in(up, UART_LSR) & + (UART_LSR_THRE | UART_LSR_DR))) { + timeout--; + if (!timeout) { + /* Should *never* happen. we warn and carry on */ + dev_crit(up->dev, "Errata i202: timedout %x\n", + serial_in(up, UART_LSR)); + break; + } + udelay(1); + } +} + +#ifdef CONFIG_PM +static void serial_omap_restore_context(struct uart_omap_port *up) +{ + if (up->errata & UART_ERRATA_i202_MDR1_ACCESS) + serial_omap_mdr1_errataset(up, UART_OMAP_MDR1_DISABLE); + else + serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE); + + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); /* Config B mode */ + serial_out(up, UART_EFR, UART_EFR_ECB); + serial_out(up, UART_LCR, 0x0); /* Operational mode */ + serial_out(up, UART_IER, 0x0); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); /* Config B mode */ + serial_out(up, UART_DLL, up->dll); + serial_out(up, UART_DLM, up->dlh); + serial_out(up, UART_LCR, 0x0); /* Operational mode */ + serial_out(up, UART_IER, up->ier); + serial_out(up, UART_FCR, up->fcr); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); + serial_out(up, UART_MCR, up->mcr); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); /* Config B mode */ + serial_out(up, UART_OMAP_SCR, up->scr); + serial_out(up, UART_EFR, up->efr); + serial_out(up, UART_LCR, up->lcr); + if (up->errata & UART_ERRATA_i202_MDR1_ACCESS) + serial_omap_mdr1_errataset(up, up->mdr1); + else + serial_out(up, UART_OMAP_MDR1, up->mdr1); + serial_out(up, UART_OMAP_WER, up->wer); +} + +static int serial_omap_runtime_suspend(struct device *dev) +{ + struct uart_omap_port *up = dev_get_drvdata(dev); + + if (!up) + return -EINVAL; + + /* + * When using 'no_console_suspend', the console UART must not be + * suspended. Since driver suspend is managed by runtime suspend, + * preventing runtime suspend (by returning error) will keep device + * active during suspend. + */ + if (up->is_suspending && !console_suspend_enabled && + uart_console(&up->port)) + return -EBUSY; + + up->context_loss_cnt = serial_omap_get_context_loss_count(up); + + serial_omap_enable_wakeup(up, true); + + up->latency = PM_QOS_CPU_LATENCY_DEFAULT_VALUE; + schedule_work(&up->qos_work); + + return 0; +} + +static int serial_omap_runtime_resume(struct device *dev) +{ + struct uart_omap_port *up = dev_get_drvdata(dev); + + int loss_cnt = serial_omap_get_context_loss_count(up); + + serial_omap_enable_wakeup(up, false); + + if (loss_cnt < 0) { + dev_dbg(dev, "serial_omap_get_context_loss_count failed : %d\n", + loss_cnt); + serial_omap_restore_context(up); + } else if (up->context_loss_cnt != loss_cnt) { + serial_omap_restore_context(up); + } + up->latency = up->calc_latency; + schedule_work(&up->qos_work); + + return 0; +} +#endif + +static const struct dev_pm_ops serial_omap_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(serial_omap_suspend, serial_omap_resume) + SET_RUNTIME_PM_OPS(serial_omap_runtime_suspend, + serial_omap_runtime_resume, NULL) + .prepare = serial_omap_prepare, + .complete = serial_omap_complete, +}; + +#if defined(CONFIG_OF) +static const struct of_device_id omap_serial_of_match[] = { + { .compatible = "ti,omap2-uart" }, + { .compatible = "ti,omap3-uart" }, + { .compatible = "ti,omap4-uart" }, + {}, +}; +MODULE_DEVICE_TABLE(of, omap_serial_of_match); +#endif + +static struct platform_driver serial_omap_driver = { + .probe = serial_omap_probe, + .remove = serial_omap_remove, + .driver = { + .name = OMAP_SERIAL_DRIVER_NAME, + .pm = &serial_omap_dev_pm_ops, + .of_match_table = of_match_ptr(omap_serial_of_match), + }, +}; + +static int __init serial_omap_init(void) +{ + int ret; + + ret = uart_register_driver(&serial_omap_reg); + if (ret != 0) + return ret; + ret = platform_driver_register(&serial_omap_driver); + if (ret != 0) + uart_unregister_driver(&serial_omap_reg); + return ret; +} + +static void __exit serial_omap_exit(void) +{ + platform_driver_unregister(&serial_omap_driver); + uart_unregister_driver(&serial_omap_reg); +} + +module_init(serial_omap_init); +module_exit(serial_omap_exit); + +MODULE_DESCRIPTION("OMAP High Speed UART driver"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Texas Instruments Inc"); diff --git a/drivers/tty/serial/owl-uart.c b/drivers/tty/serial/owl-uart.c new file mode 100644 index 000000000..a0d4bffe7 --- /dev/null +++ b/drivers/tty/serial/owl-uart.c @@ -0,0 +1,760 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Actions Semi Owl family serial console + * + * Copyright 2013 Actions Semi Inc. + * Author: Actions Semi, Inc. + * + * Copyright (c) 2016-2017 Andreas Färber + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define OWL_UART_PORT_NUM 7 +#define OWL_UART_DEV_NAME "ttyOWL" + +#define OWL_UART_CTL 0x000 +#define OWL_UART_RXDAT 0x004 +#define OWL_UART_TXDAT 0x008 +#define OWL_UART_STAT 0x00c + +#define OWL_UART_CTL_DWLS_MASK GENMASK(1, 0) +#define OWL_UART_CTL_DWLS_5BITS (0x0 << 0) +#define OWL_UART_CTL_DWLS_6BITS (0x1 << 0) +#define OWL_UART_CTL_DWLS_7BITS (0x2 << 0) +#define OWL_UART_CTL_DWLS_8BITS (0x3 << 0) +#define OWL_UART_CTL_STPS_2BITS BIT(2) +#define OWL_UART_CTL_PRS_MASK GENMASK(6, 4) +#define OWL_UART_CTL_PRS_NONE (0x0 << 4) +#define OWL_UART_CTL_PRS_ODD (0x4 << 4) +#define OWL_UART_CTL_PRS_MARK (0x5 << 4) +#define OWL_UART_CTL_PRS_EVEN (0x6 << 4) +#define OWL_UART_CTL_PRS_SPACE (0x7 << 4) +#define OWL_UART_CTL_AFE BIT(12) +#define OWL_UART_CTL_TRFS_TX BIT(14) +#define OWL_UART_CTL_EN BIT(15) +#define OWL_UART_CTL_RXDE BIT(16) +#define OWL_UART_CTL_TXDE BIT(17) +#define OWL_UART_CTL_RXIE BIT(18) +#define OWL_UART_CTL_TXIE BIT(19) +#define OWL_UART_CTL_LBEN BIT(20) + +#define OWL_UART_STAT_RIP BIT(0) +#define OWL_UART_STAT_TIP BIT(1) +#define OWL_UART_STAT_RXER BIT(2) +#define OWL_UART_STAT_TFER BIT(3) +#define OWL_UART_STAT_RXST BIT(4) +#define OWL_UART_STAT_RFEM BIT(5) +#define OWL_UART_STAT_TFFU BIT(6) +#define OWL_UART_STAT_CTSS BIT(7) +#define OWL_UART_STAT_RTSS BIT(8) +#define OWL_UART_STAT_TFES BIT(10) +#define OWL_UART_STAT_TRFL_MASK GENMASK(16, 11) +#define OWL_UART_STAT_UTBB BIT(17) + +static struct uart_driver owl_uart_driver; + +struct owl_uart_info { + unsigned int tx_fifosize; +}; + +struct owl_uart_port { + struct uart_port port; + struct clk *clk; +}; + +#define to_owl_uart_port(prt) container_of(prt, struct owl_uart_port, prt) + +static struct owl_uart_port *owl_uart_ports[OWL_UART_PORT_NUM]; + +static inline void owl_uart_write(struct uart_port *port, u32 val, unsigned int off) +{ + writel(val, port->membase + off); +} + +static inline u32 owl_uart_read(struct uart_port *port, unsigned int off) +{ + return readl(port->membase + off); +} + +static void owl_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + u32 ctl; + + ctl = owl_uart_read(port, OWL_UART_CTL); + + if (mctrl & TIOCM_LOOP) + ctl |= OWL_UART_CTL_LBEN; + else + ctl &= ~OWL_UART_CTL_LBEN; + + owl_uart_write(port, ctl, OWL_UART_CTL); +} + +static unsigned int owl_uart_get_mctrl(struct uart_port *port) +{ + unsigned int mctrl = TIOCM_CAR | TIOCM_DSR; + u32 stat, ctl; + + ctl = owl_uart_read(port, OWL_UART_CTL); + stat = owl_uart_read(port, OWL_UART_STAT); + if (stat & OWL_UART_STAT_RTSS) + mctrl |= TIOCM_RTS; + if ((stat & OWL_UART_STAT_CTSS) || !(ctl & OWL_UART_CTL_AFE)) + mctrl |= TIOCM_CTS; + return mctrl; +} + +static unsigned int owl_uart_tx_empty(struct uart_port *port) +{ + unsigned long flags; + u32 val; + unsigned int ret; + + spin_lock_irqsave(&port->lock, flags); + + val = owl_uart_read(port, OWL_UART_STAT); + ret = (val & OWL_UART_STAT_TFES) ? TIOCSER_TEMT : 0; + + spin_unlock_irqrestore(&port->lock, flags); + + return ret; +} + +static void owl_uart_stop_rx(struct uart_port *port) +{ + u32 val; + + val = owl_uart_read(port, OWL_UART_CTL); + val &= ~(OWL_UART_CTL_RXIE | OWL_UART_CTL_RXDE); + owl_uart_write(port, val, OWL_UART_CTL); + + val = owl_uart_read(port, OWL_UART_STAT); + val |= OWL_UART_STAT_RIP; + owl_uart_write(port, val, OWL_UART_STAT); +} + +static void owl_uart_stop_tx(struct uart_port *port) +{ + u32 val; + + val = owl_uart_read(port, OWL_UART_CTL); + val &= ~(OWL_UART_CTL_TXIE | OWL_UART_CTL_TXDE); + owl_uart_write(port, val, OWL_UART_CTL); + + val = owl_uart_read(port, OWL_UART_STAT); + val |= OWL_UART_STAT_TIP; + owl_uart_write(port, val, OWL_UART_STAT); +} + +static void owl_uart_start_tx(struct uart_port *port) +{ + u32 val; + + if (uart_tx_stopped(port)) { + owl_uart_stop_tx(port); + return; + } + + val = owl_uart_read(port, OWL_UART_STAT); + val |= OWL_UART_STAT_TIP; + owl_uart_write(port, val, OWL_UART_STAT); + + val = owl_uart_read(port, OWL_UART_CTL); + val |= OWL_UART_CTL_TXIE; + owl_uart_write(port, val, OWL_UART_CTL); +} + +static void owl_uart_send_chars(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + unsigned int ch; + + if (uart_tx_stopped(port)) + return; + + if (port->x_char) { + while (!(owl_uart_read(port, OWL_UART_STAT) & OWL_UART_STAT_TFFU)) + cpu_relax(); + owl_uart_write(port, port->x_char, OWL_UART_TXDAT); + port->icount.tx++; + port->x_char = 0; + } + + while (!(owl_uart_read(port, OWL_UART_STAT) & OWL_UART_STAT_TFFU)) { + if (uart_circ_empty(xmit)) + break; + + ch = xmit->buf[xmit->tail]; + owl_uart_write(port, ch, OWL_UART_TXDAT); + xmit->tail = (xmit->tail + 1) & (SERIAL_XMIT_SIZE - 1); + port->icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + owl_uart_stop_tx(port); +} + +static void owl_uart_receive_chars(struct uart_port *port) +{ + u32 stat, val; + + val = owl_uart_read(port, OWL_UART_CTL); + val &= ~OWL_UART_CTL_TRFS_TX; + owl_uart_write(port, val, OWL_UART_CTL); + + stat = owl_uart_read(port, OWL_UART_STAT); + while (!(stat & OWL_UART_STAT_RFEM)) { + char flag = TTY_NORMAL; + + if (stat & OWL_UART_STAT_RXER) + port->icount.overrun++; + + if (stat & OWL_UART_STAT_RXST) { + /* We are not able to distinguish the error type. */ + port->icount.brk++; + port->icount.frame++; + + stat &= port->read_status_mask; + if (stat & OWL_UART_STAT_RXST) + flag = TTY_PARITY; + } else + port->icount.rx++; + + val = owl_uart_read(port, OWL_UART_RXDAT); + val &= 0xff; + + if ((stat & port->ignore_status_mask) == 0) + tty_insert_flip_char(&port->state->port, val, flag); + + stat = owl_uart_read(port, OWL_UART_STAT); + } + + spin_unlock(&port->lock); + tty_flip_buffer_push(&port->state->port); + spin_lock(&port->lock); +} + +static irqreturn_t owl_uart_irq(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + unsigned long flags; + u32 stat; + + spin_lock_irqsave(&port->lock, flags); + + stat = owl_uart_read(port, OWL_UART_STAT); + + if (stat & OWL_UART_STAT_RIP) + owl_uart_receive_chars(port); + + if (stat & OWL_UART_STAT_TIP) + owl_uart_send_chars(port); + + stat = owl_uart_read(port, OWL_UART_STAT); + stat |= OWL_UART_STAT_RIP | OWL_UART_STAT_TIP; + owl_uart_write(port, stat, OWL_UART_STAT); + + spin_unlock_irqrestore(&port->lock, flags); + + return IRQ_HANDLED; +} + +static void owl_uart_shutdown(struct uart_port *port) +{ + u32 val; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + val = owl_uart_read(port, OWL_UART_CTL); + val &= ~(OWL_UART_CTL_TXIE | OWL_UART_CTL_RXIE + | OWL_UART_CTL_TXDE | OWL_UART_CTL_RXDE | OWL_UART_CTL_EN); + owl_uart_write(port, val, OWL_UART_CTL); + + spin_unlock_irqrestore(&port->lock, flags); + + free_irq(port->irq, port); +} + +static int owl_uart_startup(struct uart_port *port) +{ + u32 val; + unsigned long flags; + int ret; + + ret = request_irq(port->irq, owl_uart_irq, IRQF_TRIGGER_HIGH, + "owl-uart", port); + if (ret) + return ret; + + spin_lock_irqsave(&port->lock, flags); + + val = owl_uart_read(port, OWL_UART_STAT); + val |= OWL_UART_STAT_RIP | OWL_UART_STAT_TIP + | OWL_UART_STAT_RXER | OWL_UART_STAT_TFER | OWL_UART_STAT_RXST; + owl_uart_write(port, val, OWL_UART_STAT); + + val = owl_uart_read(port, OWL_UART_CTL); + val |= OWL_UART_CTL_RXIE | OWL_UART_CTL_TXIE; + val |= OWL_UART_CTL_EN; + owl_uart_write(port, val, OWL_UART_CTL); + + spin_unlock_irqrestore(&port->lock, flags); + + return 0; +} + +static void owl_uart_change_baudrate(struct owl_uart_port *owl_port, + unsigned long baud) +{ + clk_set_rate(owl_port->clk, baud * 8); +} + +static void owl_uart_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + struct owl_uart_port *owl_port = to_owl_uart_port(port); + unsigned int baud; + u32 ctl; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + ctl = owl_uart_read(port, OWL_UART_CTL); + + ctl &= ~OWL_UART_CTL_DWLS_MASK; + switch (termios->c_cflag & CSIZE) { + case CS5: + ctl |= OWL_UART_CTL_DWLS_5BITS; + break; + case CS6: + ctl |= OWL_UART_CTL_DWLS_6BITS; + break; + case CS7: + ctl |= OWL_UART_CTL_DWLS_7BITS; + break; + case CS8: + default: + ctl |= OWL_UART_CTL_DWLS_8BITS; + break; + } + + if (termios->c_cflag & CSTOPB) + ctl |= OWL_UART_CTL_STPS_2BITS; + else + ctl &= ~OWL_UART_CTL_STPS_2BITS; + + ctl &= ~OWL_UART_CTL_PRS_MASK; + if (termios->c_cflag & PARENB) { + if (termios->c_cflag & CMSPAR) { + if (termios->c_cflag & PARODD) + ctl |= OWL_UART_CTL_PRS_MARK; + else + ctl |= OWL_UART_CTL_PRS_SPACE; + } else if (termios->c_cflag & PARODD) + ctl |= OWL_UART_CTL_PRS_ODD; + else + ctl |= OWL_UART_CTL_PRS_EVEN; + } else + ctl |= OWL_UART_CTL_PRS_NONE; + + if (termios->c_cflag & CRTSCTS) + ctl |= OWL_UART_CTL_AFE; + else + ctl &= ~OWL_UART_CTL_AFE; + + owl_uart_write(port, ctl, OWL_UART_CTL); + + baud = uart_get_baud_rate(port, termios, old, 9600, 3200000); + owl_uart_change_baudrate(owl_port, baud); + + /* Don't rewrite B0 */ + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, baud, baud); + + port->read_status_mask |= OWL_UART_STAT_RXER; + if (termios->c_iflag & INPCK) + port->read_status_mask |= OWL_UART_STAT_RXST; + + uart_update_timeout(port, termios->c_cflag, baud); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void owl_uart_release_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + struct resource *res; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return; + + if (port->flags & UPF_IOREMAP) { + devm_release_mem_region(port->dev, port->mapbase, + resource_size(res)); + devm_iounmap(port->dev, port->membase); + port->membase = NULL; + } +} + +static int owl_uart_request_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + struct resource *res; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENXIO; + + if (!devm_request_mem_region(port->dev, port->mapbase, + resource_size(res), dev_name(port->dev))) + return -EBUSY; + + if (port->flags & UPF_IOREMAP) { + port->membase = devm_ioremap(port->dev, port->mapbase, + resource_size(res)); + if (!port->membase) + return -EBUSY; + } + + return 0; +} + +static const char *owl_uart_type(struct uart_port *port) +{ + return (port->type == PORT_OWL) ? "owl-uart" : NULL; +} + +static int owl_uart_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + if (port->type != PORT_OWL) + return -EINVAL; + + if (port->irq != ser->irq) + return -EINVAL; + + return 0; +} + +static void owl_uart_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_OWL; + owl_uart_request_port(port); + } +} + +static const struct uart_ops owl_uart_ops = { + .set_mctrl = owl_uart_set_mctrl, + .get_mctrl = owl_uart_get_mctrl, + .tx_empty = owl_uart_tx_empty, + .start_tx = owl_uart_start_tx, + .stop_rx = owl_uart_stop_rx, + .stop_tx = owl_uart_stop_tx, + .startup = owl_uart_startup, + .shutdown = owl_uart_shutdown, + .set_termios = owl_uart_set_termios, + .type = owl_uart_type, + .config_port = owl_uart_config_port, + .request_port = owl_uart_request_port, + .release_port = owl_uart_release_port, + .verify_port = owl_uart_verify_port, +}; + +#ifdef CONFIG_SERIAL_OWL_CONSOLE + +static void owl_console_putchar(struct uart_port *port, int ch) +{ + if (!port->membase) + return; + + while (owl_uart_read(port, OWL_UART_STAT) & OWL_UART_STAT_TFFU) + cpu_relax(); + + owl_uart_write(port, ch, OWL_UART_TXDAT); +} + +static void owl_uart_port_write(struct uart_port *port, const char *s, + u_int count) +{ + u32 old_ctl, val; + unsigned long flags; + int locked; + + local_irq_save(flags); + + if (port->sysrq) + locked = 0; + else if (oops_in_progress) + locked = spin_trylock(&port->lock); + else { + spin_lock(&port->lock); + locked = 1; + } + + old_ctl = owl_uart_read(port, OWL_UART_CTL); + val = old_ctl | OWL_UART_CTL_TRFS_TX; + /* disable IRQ */ + val &= ~(OWL_UART_CTL_RXIE | OWL_UART_CTL_TXIE); + owl_uart_write(port, val, OWL_UART_CTL); + + uart_console_write(port, s, count, owl_console_putchar); + + /* wait until all contents have been sent out */ + while (owl_uart_read(port, OWL_UART_STAT) & OWL_UART_STAT_TRFL_MASK) + cpu_relax(); + + /* clear IRQ pending */ + val = owl_uart_read(port, OWL_UART_STAT); + val |= OWL_UART_STAT_TIP | OWL_UART_STAT_RIP; + owl_uart_write(port, val, OWL_UART_STAT); + + owl_uart_write(port, old_ctl, OWL_UART_CTL); + + if (locked) + spin_unlock(&port->lock); + + local_irq_restore(flags); +} + +static void owl_uart_console_write(struct console *co, const char *s, + u_int count) +{ + struct owl_uart_port *owl_port; + + owl_port = owl_uart_ports[co->index]; + if (!owl_port) + return; + + owl_uart_port_write(&owl_port->port, s, count); +} + +static int owl_uart_console_setup(struct console *co, char *options) +{ + struct owl_uart_port *owl_port; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index < 0 || co->index >= OWL_UART_PORT_NUM) + return -EINVAL; + + owl_port = owl_uart_ports[co->index]; + if (!owl_port || !owl_port->port.membase) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&owl_port->port, co, baud, parity, bits, flow); +} + +static struct console owl_uart_console = { + .name = OWL_UART_DEV_NAME, + .write = owl_uart_console_write, + .device = uart_console_device, + .setup = owl_uart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &owl_uart_driver, +}; + +static int __init owl_uart_console_init(void) +{ + register_console(&owl_uart_console); + + return 0; +} +console_initcall(owl_uart_console_init); + +static void owl_uart_early_console_write(struct console *co, + const char *s, + u_int count) +{ + struct earlycon_device *dev = co->data; + + owl_uart_port_write(&dev->port, s, count); +} + +static int __init +owl_uart_early_console_setup(struct earlycon_device *device, const char *opt) +{ + if (!device->port.membase) + return -ENODEV; + + device->con->write = owl_uart_early_console_write; + + return 0; +} +OF_EARLYCON_DECLARE(owl, "actions,owl-uart", + owl_uart_early_console_setup); + +#define OWL_UART_CONSOLE (&owl_uart_console) +#else +#define OWL_UART_CONSOLE NULL +#endif + +static struct uart_driver owl_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "owl-uart", + .dev_name = OWL_UART_DEV_NAME, + .nr = OWL_UART_PORT_NUM, + .cons = OWL_UART_CONSOLE, +}; + +static const struct owl_uart_info owl_s500_info = { + .tx_fifosize = 16, +}; + +static const struct owl_uart_info owl_s900_info = { + .tx_fifosize = 32, +}; + +static const struct of_device_id owl_uart_dt_matches[] = { + { .compatible = "actions,s500-uart", .data = &owl_s500_info }, + { .compatible = "actions,s900-uart", .data = &owl_s900_info }, + { } +}; +MODULE_DEVICE_TABLE(of, owl_uart_dt_matches); + +static int owl_uart_probe(struct platform_device *pdev) +{ + const struct of_device_id *match; + const struct owl_uart_info *info = NULL; + struct resource *res_mem; + struct owl_uart_port *owl_port; + int ret, irq; + + if (pdev->dev.of_node) { + pdev->id = of_alias_get_id(pdev->dev.of_node, "serial"); + match = of_match_node(owl_uart_dt_matches, pdev->dev.of_node); + if (match) + info = match->data; + } + + if (pdev->id < 0 || pdev->id >= OWL_UART_PORT_NUM) { + dev_err(&pdev->dev, "id %d out of range\n", pdev->id); + return -EINVAL; + } + + res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res_mem) { + dev_err(&pdev->dev, "could not get mem\n"); + return -ENODEV; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + if (owl_uart_ports[pdev->id]) { + dev_err(&pdev->dev, "port %d already allocated\n", pdev->id); + return -EBUSY; + } + + owl_port = devm_kzalloc(&pdev->dev, sizeof(*owl_port), GFP_KERNEL); + if (!owl_port) + return -ENOMEM; + + owl_port->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(owl_port->clk)) { + dev_err(&pdev->dev, "could not get clk\n"); + return PTR_ERR(owl_port->clk); + } + + ret = clk_prepare_enable(owl_port->clk); + if (ret) { + dev_err(&pdev->dev, "could not enable clk\n"); + return ret; + } + + owl_port->port.dev = &pdev->dev; + owl_port->port.line = pdev->id; + owl_port->port.type = PORT_OWL; + owl_port->port.iotype = UPIO_MEM; + owl_port->port.mapbase = res_mem->start; + owl_port->port.irq = irq; + owl_port->port.uartclk = clk_get_rate(owl_port->clk); + if (owl_port->port.uartclk == 0) { + dev_err(&pdev->dev, "clock rate is zero\n"); + clk_disable_unprepare(owl_port->clk); + return -EINVAL; + } + owl_port->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_LOW_LATENCY; + owl_port->port.x_char = 0; + owl_port->port.fifosize = (info) ? info->tx_fifosize : 16; + owl_port->port.ops = &owl_uart_ops; + + owl_uart_ports[pdev->id] = owl_port; + platform_set_drvdata(pdev, owl_port); + + ret = uart_add_one_port(&owl_uart_driver, &owl_port->port); + if (ret) + owl_uart_ports[pdev->id] = NULL; + + return ret; +} + +static int owl_uart_remove(struct platform_device *pdev) +{ + struct owl_uart_port *owl_port = platform_get_drvdata(pdev); + + uart_remove_one_port(&owl_uart_driver, &owl_port->port); + owl_uart_ports[pdev->id] = NULL; + clk_disable_unprepare(owl_port->clk); + + return 0; +} + +static struct platform_driver owl_uart_platform_driver = { + .probe = owl_uart_probe, + .remove = owl_uart_remove, + .driver = { + .name = "owl-uart", + .of_match_table = owl_uart_dt_matches, + }, +}; + +static int __init owl_uart_init(void) +{ + int ret; + + ret = uart_register_driver(&owl_uart_driver); + if (ret) + return ret; + + ret = platform_driver_register(&owl_uart_platform_driver); + if (ret) + uart_unregister_driver(&owl_uart_driver); + + return ret; +} + +static void __exit owl_uart_exit(void) +{ + platform_driver_unregister(&owl_uart_platform_driver); + uart_unregister_driver(&owl_uart_driver); +} + +module_init(owl_uart_init); +module_exit(owl_uart_exit); + +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c new file mode 100644 index 000000000..cb68a1028 --- /dev/null +++ b/drivers/tty/serial/pch_uart.c @@ -0,0 +1,1968 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + *Copyright (C) 2011 LAPIS Semiconductor Co., Ltd. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +enum { + PCH_UART_HANDLED_RX_INT_SHIFT, + PCH_UART_HANDLED_TX_INT_SHIFT, + PCH_UART_HANDLED_RX_ERR_INT_SHIFT, + PCH_UART_HANDLED_RX_TRG_INT_SHIFT, + PCH_UART_HANDLED_MS_INT_SHIFT, + PCH_UART_HANDLED_LS_INT_SHIFT, +}; + +#define PCH_UART_DRIVER_DEVICE "ttyPCH" + +/* Set the max number of UART port + * Intel EG20T PCH: 4 port + * LAPIS Semiconductor ML7213 IOH: 3 port + * LAPIS Semiconductor ML7223 IOH: 2 port +*/ +#define PCH_UART_NR 4 + +#define PCH_UART_HANDLED_RX_INT (1<<((PCH_UART_HANDLED_RX_INT_SHIFT)<<1)) +#define PCH_UART_HANDLED_TX_INT (1<<((PCH_UART_HANDLED_TX_INT_SHIFT)<<1)) +#define PCH_UART_HANDLED_RX_ERR_INT (1<<((\ + PCH_UART_HANDLED_RX_ERR_INT_SHIFT)<<1)) +#define PCH_UART_HANDLED_RX_TRG_INT (1<<((\ + PCH_UART_HANDLED_RX_TRG_INT_SHIFT)<<1)) +#define PCH_UART_HANDLED_MS_INT (1<<((PCH_UART_HANDLED_MS_INT_SHIFT)<<1)) + +#define PCH_UART_HANDLED_LS_INT (1<<((PCH_UART_HANDLED_LS_INT_SHIFT)<<1)) + +#define PCH_UART_RBR 0x00 +#define PCH_UART_THR 0x00 + +#define PCH_UART_IER_MASK (PCH_UART_IER_ERBFI|PCH_UART_IER_ETBEI|\ + PCH_UART_IER_ELSI|PCH_UART_IER_EDSSI) +#define PCH_UART_IER_ERBFI 0x00000001 +#define PCH_UART_IER_ETBEI 0x00000002 +#define PCH_UART_IER_ELSI 0x00000004 +#define PCH_UART_IER_EDSSI 0x00000008 + +#define PCH_UART_IIR_IP 0x00000001 +#define PCH_UART_IIR_IID 0x00000006 +#define PCH_UART_IIR_MSI 0x00000000 +#define PCH_UART_IIR_TRI 0x00000002 +#define PCH_UART_IIR_RRI 0x00000004 +#define PCH_UART_IIR_REI 0x00000006 +#define PCH_UART_IIR_TOI 0x00000008 +#define PCH_UART_IIR_FIFO256 0x00000020 +#define PCH_UART_IIR_FIFO64 PCH_UART_IIR_FIFO256 +#define PCH_UART_IIR_FE 0x000000C0 + +#define PCH_UART_FCR_FIFOE 0x00000001 +#define PCH_UART_FCR_RFR 0x00000002 +#define PCH_UART_FCR_TFR 0x00000004 +#define PCH_UART_FCR_DMS 0x00000008 +#define PCH_UART_FCR_FIFO256 0x00000020 +#define PCH_UART_FCR_RFTL 0x000000C0 + +#define PCH_UART_FCR_RFTL1 0x00000000 +#define PCH_UART_FCR_RFTL64 0x00000040 +#define PCH_UART_FCR_RFTL128 0x00000080 +#define PCH_UART_FCR_RFTL224 0x000000C0 +#define PCH_UART_FCR_RFTL16 PCH_UART_FCR_RFTL64 +#define PCH_UART_FCR_RFTL32 PCH_UART_FCR_RFTL128 +#define PCH_UART_FCR_RFTL56 PCH_UART_FCR_RFTL224 +#define PCH_UART_FCR_RFTL4 PCH_UART_FCR_RFTL64 +#define PCH_UART_FCR_RFTL8 PCH_UART_FCR_RFTL128 +#define PCH_UART_FCR_RFTL14 PCH_UART_FCR_RFTL224 +#define PCH_UART_FCR_RFTL_SHIFT 6 + +#define PCH_UART_LCR_WLS 0x00000003 +#define PCH_UART_LCR_STB 0x00000004 +#define PCH_UART_LCR_PEN 0x00000008 +#define PCH_UART_LCR_EPS 0x00000010 +#define PCH_UART_LCR_SP 0x00000020 +#define PCH_UART_LCR_SB 0x00000040 +#define PCH_UART_LCR_DLAB 0x00000080 +#define PCH_UART_LCR_NP 0x00000000 +#define PCH_UART_LCR_OP PCH_UART_LCR_PEN +#define PCH_UART_LCR_EP (PCH_UART_LCR_PEN | PCH_UART_LCR_EPS) +#define PCH_UART_LCR_1P (PCH_UART_LCR_PEN | PCH_UART_LCR_SP) +#define PCH_UART_LCR_0P (PCH_UART_LCR_PEN | PCH_UART_LCR_EPS |\ + PCH_UART_LCR_SP) + +#define PCH_UART_LCR_5BIT 0x00000000 +#define PCH_UART_LCR_6BIT 0x00000001 +#define PCH_UART_LCR_7BIT 0x00000002 +#define PCH_UART_LCR_8BIT 0x00000003 + +#define PCH_UART_MCR_DTR 0x00000001 +#define PCH_UART_MCR_RTS 0x00000002 +#define PCH_UART_MCR_OUT 0x0000000C +#define PCH_UART_MCR_LOOP 0x00000010 +#define PCH_UART_MCR_AFE 0x00000020 + +#define PCH_UART_LSR_DR 0x00000001 +#define PCH_UART_LSR_ERR (1<<7) + +#define PCH_UART_MSR_DCTS 0x00000001 +#define PCH_UART_MSR_DDSR 0x00000002 +#define PCH_UART_MSR_TERI 0x00000004 +#define PCH_UART_MSR_DDCD 0x00000008 +#define PCH_UART_MSR_CTS 0x00000010 +#define PCH_UART_MSR_DSR 0x00000020 +#define PCH_UART_MSR_RI 0x00000040 +#define PCH_UART_MSR_DCD 0x00000080 +#define PCH_UART_MSR_DELTA (PCH_UART_MSR_DCTS | PCH_UART_MSR_DDSR |\ + PCH_UART_MSR_TERI | PCH_UART_MSR_DDCD) + +#define PCH_UART_DLL 0x00 +#define PCH_UART_DLM 0x01 + +#define PCH_UART_BRCSR 0x0E + +#define PCH_UART_IID_RLS (PCH_UART_IIR_REI) +#define PCH_UART_IID_RDR (PCH_UART_IIR_RRI) +#define PCH_UART_IID_RDR_TO (PCH_UART_IIR_RRI | PCH_UART_IIR_TOI) +#define PCH_UART_IID_THRE (PCH_UART_IIR_TRI) +#define PCH_UART_IID_MS (PCH_UART_IIR_MSI) + +#define PCH_UART_HAL_PARITY_NONE (PCH_UART_LCR_NP) +#define PCH_UART_HAL_PARITY_ODD (PCH_UART_LCR_OP) +#define PCH_UART_HAL_PARITY_EVEN (PCH_UART_LCR_EP) +#define PCH_UART_HAL_PARITY_FIX1 (PCH_UART_LCR_1P) +#define PCH_UART_HAL_PARITY_FIX0 (PCH_UART_LCR_0P) +#define PCH_UART_HAL_5BIT (PCH_UART_LCR_5BIT) +#define PCH_UART_HAL_6BIT (PCH_UART_LCR_6BIT) +#define PCH_UART_HAL_7BIT (PCH_UART_LCR_7BIT) +#define PCH_UART_HAL_8BIT (PCH_UART_LCR_8BIT) +#define PCH_UART_HAL_STB1 0 +#define PCH_UART_HAL_STB2 (PCH_UART_LCR_STB) + +#define PCH_UART_HAL_CLR_TX_FIFO (PCH_UART_FCR_TFR) +#define PCH_UART_HAL_CLR_RX_FIFO (PCH_UART_FCR_RFR) +#define PCH_UART_HAL_CLR_ALL_FIFO (PCH_UART_HAL_CLR_TX_FIFO | \ + PCH_UART_HAL_CLR_RX_FIFO) + +#define PCH_UART_HAL_DMA_MODE0 0 +#define PCH_UART_HAL_FIFO_DIS 0 +#define PCH_UART_HAL_FIFO16 (PCH_UART_FCR_FIFOE) +#define PCH_UART_HAL_FIFO256 (PCH_UART_FCR_FIFOE | \ + PCH_UART_FCR_FIFO256) +#define PCH_UART_HAL_FIFO64 (PCH_UART_HAL_FIFO256) +#define PCH_UART_HAL_TRIGGER1 (PCH_UART_FCR_RFTL1) +#define PCH_UART_HAL_TRIGGER64 (PCH_UART_FCR_RFTL64) +#define PCH_UART_HAL_TRIGGER128 (PCH_UART_FCR_RFTL128) +#define PCH_UART_HAL_TRIGGER224 (PCH_UART_FCR_RFTL224) +#define PCH_UART_HAL_TRIGGER16 (PCH_UART_FCR_RFTL16) +#define PCH_UART_HAL_TRIGGER32 (PCH_UART_FCR_RFTL32) +#define PCH_UART_HAL_TRIGGER56 (PCH_UART_FCR_RFTL56) +#define PCH_UART_HAL_TRIGGER4 (PCH_UART_FCR_RFTL4) +#define PCH_UART_HAL_TRIGGER8 (PCH_UART_FCR_RFTL8) +#define PCH_UART_HAL_TRIGGER14 (PCH_UART_FCR_RFTL14) +#define PCH_UART_HAL_TRIGGER_L (PCH_UART_FCR_RFTL64) +#define PCH_UART_HAL_TRIGGER_M (PCH_UART_FCR_RFTL128) +#define PCH_UART_HAL_TRIGGER_H (PCH_UART_FCR_RFTL224) + +#define PCH_UART_HAL_RX_INT (PCH_UART_IER_ERBFI) +#define PCH_UART_HAL_TX_INT (PCH_UART_IER_ETBEI) +#define PCH_UART_HAL_RX_ERR_INT (PCH_UART_IER_ELSI) +#define PCH_UART_HAL_MS_INT (PCH_UART_IER_EDSSI) +#define PCH_UART_HAL_ALL_INT (PCH_UART_IER_MASK) + +#define PCH_UART_HAL_DTR (PCH_UART_MCR_DTR) +#define PCH_UART_HAL_RTS (PCH_UART_MCR_RTS) +#define PCH_UART_HAL_OUT (PCH_UART_MCR_OUT) +#define PCH_UART_HAL_LOOP (PCH_UART_MCR_LOOP) +#define PCH_UART_HAL_AFE (PCH_UART_MCR_AFE) + +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +#define DEFAULT_UARTCLK 1843200 /* 1.8432 MHz */ +#define CMITC_UARTCLK 192000000 /* 192.0000 MHz */ +#define FRI2_64_UARTCLK 64000000 /* 64.0000 MHz */ +#define FRI2_48_UARTCLK 48000000 /* 48.0000 MHz */ +#define NTC1_UARTCLK 64000000 /* 64.0000 MHz */ +#define MINNOW_UARTCLK 50000000 /* 50.0000 MHz */ + +struct pch_uart_buffer { + unsigned char *buf; + int size; +}; + +struct eg20t_port { + struct uart_port port; + int port_type; + void __iomem *membase; + resource_size_t mapbase; + unsigned int iobase; + struct pci_dev *pdev; + int fifo_size; + unsigned int uartclk; + int start_tx; + int start_rx; + int tx_empty; + int trigger; + int trigger_level; + struct pch_uart_buffer rxbuf; + unsigned int dmsr; + unsigned int fcr; + unsigned int mcr; + unsigned int use_dma; + struct dma_async_tx_descriptor *desc_tx; + struct dma_async_tx_descriptor *desc_rx; + struct pch_dma_slave param_tx; + struct pch_dma_slave param_rx; + struct dma_chan *chan_tx; + struct dma_chan *chan_rx; + struct scatterlist *sg_tx_p; + int nent; + int orig_nent; + struct scatterlist sg_rx; + int tx_dma_use; + void *rx_buf_virt; + dma_addr_t rx_buf_dma; + + struct dentry *debugfs; +#define IRQ_NAME_SIZE 17 + char irq_name[IRQ_NAME_SIZE]; + + /* protect the eg20t_port private structure and io access to membase */ + spinlock_t lock; +}; + +/** + * struct pch_uart_driver_data - private data structure for UART-DMA + * @port_type: The type of UART port + * @line_no: UART port line number (0, 1, 2...) + */ +struct pch_uart_driver_data { + int port_type; + int line_no; +}; + +enum pch_uart_num_t { + pch_et20t_uart0 = 0, + pch_et20t_uart1, + pch_et20t_uart2, + pch_et20t_uart3, + pch_ml7213_uart0, + pch_ml7213_uart1, + pch_ml7213_uart2, + pch_ml7223_uart0, + pch_ml7223_uart1, + pch_ml7831_uart0, + pch_ml7831_uart1, +}; + +static struct pch_uart_driver_data drv_dat[] = { + [pch_et20t_uart0] = {PORT_PCH_8LINE, 0}, + [pch_et20t_uart1] = {PORT_PCH_2LINE, 1}, + [pch_et20t_uart2] = {PORT_PCH_2LINE, 2}, + [pch_et20t_uart3] = {PORT_PCH_2LINE, 3}, + [pch_ml7213_uart0] = {PORT_PCH_8LINE, 0}, + [pch_ml7213_uart1] = {PORT_PCH_2LINE, 1}, + [pch_ml7213_uart2] = {PORT_PCH_2LINE, 2}, + [pch_ml7223_uart0] = {PORT_PCH_8LINE, 0}, + [pch_ml7223_uart1] = {PORT_PCH_2LINE, 1}, + [pch_ml7831_uart0] = {PORT_PCH_8LINE, 0}, + [pch_ml7831_uart1] = {PORT_PCH_2LINE, 1}, +}; + +#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE +static struct eg20t_port *pch_uart_ports[PCH_UART_NR]; +#endif +static unsigned int default_baud = 9600; +static unsigned int user_uartclk = 0; +static const int trigger_level_256[4] = { 1, 64, 128, 224 }; +static const int trigger_level_64[4] = { 1, 16, 32, 56 }; +static const int trigger_level_16[4] = { 1, 4, 8, 14 }; +static const int trigger_level_1[4] = { 1, 1, 1, 1 }; + +#ifdef CONFIG_DEBUG_FS + +#define PCH_REGS_BUFSIZE 1024 + + +static ssize_t port_show_regs(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct eg20t_port *priv = file->private_data; + char *buf; + u32 len = 0; + ssize_t ret; + unsigned char lcr; + + buf = kzalloc(PCH_REGS_BUFSIZE, GFP_KERNEL); + if (!buf) + return 0; + + len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len, + "PCH EG20T port[%d] regs:\n", priv->port.line); + + len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len, + "=================================\n"); + len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len, + "IER: \t0x%02x\n", ioread8(priv->membase + UART_IER)); + len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len, + "IIR: \t0x%02x\n", ioread8(priv->membase + UART_IIR)); + len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len, + "LCR: \t0x%02x\n", ioread8(priv->membase + UART_LCR)); + len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len, + "MCR: \t0x%02x\n", ioread8(priv->membase + UART_MCR)); + len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len, + "LSR: \t0x%02x\n", ioread8(priv->membase + UART_LSR)); + len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len, + "MSR: \t0x%02x\n", ioread8(priv->membase + UART_MSR)); + len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len, + "BRCSR: \t0x%02x\n", + ioread8(priv->membase + PCH_UART_BRCSR)); + + lcr = ioread8(priv->membase + UART_LCR); + iowrite8(PCH_UART_LCR_DLAB, priv->membase + UART_LCR); + len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len, + "DLL: \t0x%02x\n", ioread8(priv->membase + UART_DLL)); + len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len, + "DLM: \t0x%02x\n", ioread8(priv->membase + UART_DLM)); + iowrite8(lcr, priv->membase + UART_LCR); + + if (len > PCH_REGS_BUFSIZE) + len = PCH_REGS_BUFSIZE; + + ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); + kfree(buf); + return ret; +} + +static const struct file_operations port_regs_ops = { + .owner = THIS_MODULE, + .open = simple_open, + .read = port_show_regs, + .llseek = default_llseek, +}; +#endif /* CONFIG_DEBUG_FS */ + +static const struct dmi_system_id pch_uart_dmi_table[] = { + { + .ident = "CM-iTC", + { + DMI_MATCH(DMI_BOARD_NAME, "CM-iTC"), + }, + (void *)CMITC_UARTCLK, + }, + { + .ident = "FRI2", + { + DMI_MATCH(DMI_BIOS_VERSION, "FRI2"), + }, + (void *)FRI2_64_UARTCLK, + }, + { + .ident = "Fish River Island II", + { + DMI_MATCH(DMI_PRODUCT_NAME, "Fish River Island II"), + }, + (void *)FRI2_48_UARTCLK, + }, + { + .ident = "COMe-mTT", + { + DMI_MATCH(DMI_BOARD_NAME, "COMe-mTT"), + }, + (void *)NTC1_UARTCLK, + }, + { + .ident = "nanoETXexpress-TT", + { + DMI_MATCH(DMI_BOARD_NAME, "nanoETXexpress-TT"), + }, + (void *)NTC1_UARTCLK, + }, + { + .ident = "MinnowBoard", + { + DMI_MATCH(DMI_BOARD_NAME, "MinnowBoard"), + }, + (void *)MINNOW_UARTCLK, + }, + { } +}; + +/* Return UART clock, checking for board specific clocks. */ +static unsigned int pch_uart_get_uartclk(void) +{ + const struct dmi_system_id *d; + + if (user_uartclk) + return user_uartclk; + + d = dmi_first_match(pch_uart_dmi_table); + if (d) + return (unsigned long)d->driver_data; + + return DEFAULT_UARTCLK; +} + +static void pch_uart_hal_enable_interrupt(struct eg20t_port *priv, + unsigned int flag) +{ + u8 ier = ioread8(priv->membase + UART_IER); + ier |= flag & PCH_UART_IER_MASK; + iowrite8(ier, priv->membase + UART_IER); +} + +static void pch_uart_hal_disable_interrupt(struct eg20t_port *priv, + unsigned int flag) +{ + u8 ier = ioread8(priv->membase + UART_IER); + ier &= ~(flag & PCH_UART_IER_MASK); + iowrite8(ier, priv->membase + UART_IER); +} + +static int pch_uart_hal_set_line(struct eg20t_port *priv, unsigned int baud, + unsigned int parity, unsigned int bits, + unsigned int stb) +{ + unsigned int dll, dlm, lcr; + int div; + + div = DIV_ROUND_CLOSEST(priv->uartclk / 16, baud); + if (div < 0 || USHRT_MAX <= div) { + dev_err(priv->port.dev, "Invalid Baud(div=0x%x)\n", div); + return -EINVAL; + } + + dll = (unsigned int)div & 0x00FFU; + dlm = ((unsigned int)div >> 8) & 0x00FFU; + + if (parity & ~(PCH_UART_LCR_PEN | PCH_UART_LCR_EPS | PCH_UART_LCR_SP)) { + dev_err(priv->port.dev, "Invalid parity(0x%x)\n", parity); + return -EINVAL; + } + + if (bits & ~PCH_UART_LCR_WLS) { + dev_err(priv->port.dev, "Invalid bits(0x%x)\n", bits); + return -EINVAL; + } + + if (stb & ~PCH_UART_LCR_STB) { + dev_err(priv->port.dev, "Invalid STB(0x%x)\n", stb); + return -EINVAL; + } + + lcr = parity; + lcr |= bits; + lcr |= stb; + + dev_dbg(priv->port.dev, "%s:baud = %u, div = %04x, lcr = %02x (%lu)\n", + __func__, baud, div, lcr, jiffies); + iowrite8(PCH_UART_LCR_DLAB, priv->membase + UART_LCR); + iowrite8(dll, priv->membase + PCH_UART_DLL); + iowrite8(dlm, priv->membase + PCH_UART_DLM); + iowrite8(lcr, priv->membase + UART_LCR); + + return 0; +} + +static int pch_uart_hal_fifo_reset(struct eg20t_port *priv, + unsigned int flag) +{ + if (flag & ~(PCH_UART_FCR_TFR | PCH_UART_FCR_RFR)) { + dev_err(priv->port.dev, "%s:Invalid flag(0x%x)\n", + __func__, flag); + return -EINVAL; + } + + iowrite8(PCH_UART_FCR_FIFOE | priv->fcr, priv->membase + UART_FCR); + iowrite8(PCH_UART_FCR_FIFOE | priv->fcr | flag, + priv->membase + UART_FCR); + iowrite8(priv->fcr, priv->membase + UART_FCR); + + return 0; +} + +static int pch_uart_hal_set_fifo(struct eg20t_port *priv, + unsigned int dmamode, + unsigned int fifo_size, unsigned int trigger) +{ + u8 fcr; + + if (dmamode & ~PCH_UART_FCR_DMS) { + dev_err(priv->port.dev, "%s:Invalid DMA Mode(0x%x)\n", + __func__, dmamode); + return -EINVAL; + } + + if (fifo_size & ~(PCH_UART_FCR_FIFOE | PCH_UART_FCR_FIFO256)) { + dev_err(priv->port.dev, "%s:Invalid FIFO SIZE(0x%x)\n", + __func__, fifo_size); + return -EINVAL; + } + + if (trigger & ~PCH_UART_FCR_RFTL) { + dev_err(priv->port.dev, "%s:Invalid TRIGGER(0x%x)\n", + __func__, trigger); + return -EINVAL; + } + + switch (priv->fifo_size) { + case 256: + priv->trigger_level = + trigger_level_256[trigger >> PCH_UART_FCR_RFTL_SHIFT]; + break; + case 64: + priv->trigger_level = + trigger_level_64[trigger >> PCH_UART_FCR_RFTL_SHIFT]; + break; + case 16: + priv->trigger_level = + trigger_level_16[trigger >> PCH_UART_FCR_RFTL_SHIFT]; + break; + default: + priv->trigger_level = + trigger_level_1[trigger >> PCH_UART_FCR_RFTL_SHIFT]; + break; + } + fcr = + dmamode | fifo_size | trigger | PCH_UART_FCR_RFR | PCH_UART_FCR_TFR; + iowrite8(PCH_UART_FCR_FIFOE, priv->membase + UART_FCR); + iowrite8(PCH_UART_FCR_FIFOE | PCH_UART_FCR_RFR | PCH_UART_FCR_TFR, + priv->membase + UART_FCR); + iowrite8(fcr, priv->membase + UART_FCR); + priv->fcr = fcr; + + return 0; +} + +static u8 pch_uart_hal_get_modem(struct eg20t_port *priv) +{ + unsigned int msr = ioread8(priv->membase + UART_MSR); + priv->dmsr = msr & PCH_UART_MSR_DELTA; + return (u8)msr; +} + +static void pch_uart_hal_write(struct eg20t_port *priv, + const unsigned char *buf, int tx_size) +{ + int i; + unsigned int thr; + + for (i = 0; i < tx_size;) { + thr = buf[i++]; + iowrite8(thr, priv->membase + PCH_UART_THR); + } +} + +static int pch_uart_hal_read(struct eg20t_port *priv, unsigned char *buf, + int rx_size) +{ + int i; + u8 rbr, lsr; + struct uart_port *port = &priv->port; + + lsr = ioread8(priv->membase + UART_LSR); + for (i = 0, lsr = ioread8(priv->membase + UART_LSR); + i < rx_size && lsr & (UART_LSR_DR | UART_LSR_BI); + lsr = ioread8(priv->membase + UART_LSR)) { + rbr = ioread8(priv->membase + PCH_UART_RBR); + + if (lsr & UART_LSR_BI) { + port->icount.brk++; + if (uart_handle_break(port)) + continue; + } + if (uart_handle_sysrq_char(port, rbr)) + continue; + + buf[i++] = rbr; + } + return i; +} + +static unsigned char pch_uart_hal_get_iid(struct eg20t_port *priv) +{ + return ioread8(priv->membase + UART_IIR) &\ + (PCH_UART_IIR_IID | PCH_UART_IIR_TOI | PCH_UART_IIR_IP); +} + +static u8 pch_uart_hal_get_line_status(struct eg20t_port *priv) +{ + return ioread8(priv->membase + UART_LSR); +} + +static void pch_uart_hal_set_break(struct eg20t_port *priv, int on) +{ + unsigned int lcr; + + lcr = ioread8(priv->membase + UART_LCR); + if (on) + lcr |= PCH_UART_LCR_SB; + else + lcr &= ~PCH_UART_LCR_SB; + + iowrite8(lcr, priv->membase + UART_LCR); +} + +static int push_rx(struct eg20t_port *priv, const unsigned char *buf, + int size) +{ + struct uart_port *port = &priv->port; + struct tty_port *tport = &port->state->port; + + tty_insert_flip_string(tport, buf, size); + tty_flip_buffer_push(tport); + + return 0; +} + +static int dma_push_rx(struct eg20t_port *priv, int size) +{ + int room; + struct uart_port *port = &priv->port; + struct tty_port *tport = &port->state->port; + + room = tty_buffer_request_room(tport, size); + + if (room < size) + dev_warn(port->dev, "Rx overrun: dropping %u bytes\n", + size - room); + if (!room) + return 0; + + tty_insert_flip_string(tport, sg_virt(&priv->sg_rx), size); + + port->icount.rx += room; + + return room; +} + +static void pch_free_dma(struct uart_port *port) +{ + struct eg20t_port *priv; + priv = container_of(port, struct eg20t_port, port); + + if (priv->chan_tx) { + dma_release_channel(priv->chan_tx); + priv->chan_tx = NULL; + } + if (priv->chan_rx) { + dma_release_channel(priv->chan_rx); + priv->chan_rx = NULL; + } + + if (priv->rx_buf_dma) { + dma_free_coherent(port->dev, port->fifosize, priv->rx_buf_virt, + priv->rx_buf_dma); + priv->rx_buf_virt = NULL; + priv->rx_buf_dma = 0; + } + + return; +} + +static bool filter(struct dma_chan *chan, void *slave) +{ + struct pch_dma_slave *param = slave; + + if ((chan->chan_id == param->chan_id) && (param->dma_dev == + chan->device->dev)) { + chan->private = param; + return true; + } else { + return false; + } +} + +static void pch_request_dma(struct uart_port *port) +{ + dma_cap_mask_t mask; + struct dma_chan *chan; + struct pci_dev *dma_dev; + struct pch_dma_slave *param; + struct eg20t_port *priv = + container_of(port, struct eg20t_port, port); + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + /* Get DMA's dev information */ + dma_dev = pci_get_slot(priv->pdev->bus, + PCI_DEVFN(PCI_SLOT(priv->pdev->devfn), 0)); + + /* Set Tx DMA */ + param = &priv->param_tx; + param->dma_dev = &dma_dev->dev; + param->chan_id = priv->port.line * 2; /* Tx = 0, 2, 4, ... */ + + param->tx_reg = port->mapbase + UART_TX; + chan = dma_request_channel(mask, filter, param); + if (!chan) { + dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Tx)\n", + __func__); + pci_dev_put(dma_dev); + return; + } + priv->chan_tx = chan; + + /* Set Rx DMA */ + param = &priv->param_rx; + param->dma_dev = &dma_dev->dev; + param->chan_id = priv->port.line * 2 + 1; /* Rx = Tx + 1 */ + + param->rx_reg = port->mapbase + UART_RX; + chan = dma_request_channel(mask, filter, param); + if (!chan) { + dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Rx)\n", + __func__); + dma_release_channel(priv->chan_tx); + priv->chan_tx = NULL; + pci_dev_put(dma_dev); + return; + } + + /* Get Consistent memory for DMA */ + priv->rx_buf_virt = dma_alloc_coherent(port->dev, port->fifosize, + &priv->rx_buf_dma, GFP_KERNEL); + priv->chan_rx = chan; + + pci_dev_put(dma_dev); +} + +static void pch_dma_rx_complete(void *arg) +{ + struct eg20t_port *priv = arg; + struct uart_port *port = &priv->port; + int count; + + dma_sync_sg_for_cpu(port->dev, &priv->sg_rx, 1, DMA_FROM_DEVICE); + count = dma_push_rx(priv, priv->trigger_level); + if (count) + tty_flip_buffer_push(&port->state->port); + async_tx_ack(priv->desc_rx); + pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT | + PCH_UART_HAL_RX_ERR_INT); +} + +static void pch_dma_tx_complete(void *arg) +{ + struct eg20t_port *priv = arg; + struct uart_port *port = &priv->port; + struct circ_buf *xmit = &port->state->xmit; + struct scatterlist *sg = priv->sg_tx_p; + int i; + + for (i = 0; i < priv->nent; i++, sg++) { + xmit->tail += sg_dma_len(sg); + port->icount.tx += sg_dma_len(sg); + } + xmit->tail &= UART_XMIT_SIZE - 1; + async_tx_ack(priv->desc_tx); + dma_unmap_sg(port->dev, priv->sg_tx_p, priv->orig_nent, DMA_TO_DEVICE); + priv->tx_dma_use = 0; + priv->nent = 0; + priv->orig_nent = 0; + kfree(priv->sg_tx_p); + pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT); +} + +static int pop_tx(struct eg20t_port *priv, int size) +{ + int count = 0; + struct uart_port *port = &priv->port; + struct circ_buf *xmit = &port->state->xmit; + + if (uart_tx_stopped(port) || uart_circ_empty(xmit) || count >= size) + goto pop_tx_end; + + do { + int cnt_to_end = + CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); + int sz = min(size - count, cnt_to_end); + pch_uart_hal_write(priv, &xmit->buf[xmit->tail], sz); + xmit->tail = (xmit->tail + sz) & (UART_XMIT_SIZE - 1); + count += sz; + } while (!uart_circ_empty(xmit) && count < size); + +pop_tx_end: + dev_dbg(priv->port.dev, "%d characters. Remained %d characters.(%lu)\n", + count, size - count, jiffies); + + return count; +} + +static int handle_rx_to(struct eg20t_port *priv) +{ + struct pch_uart_buffer *buf; + int rx_size; + int ret; + if (!priv->start_rx) { + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT | + PCH_UART_HAL_RX_ERR_INT); + return 0; + } + buf = &priv->rxbuf; + do { + rx_size = pch_uart_hal_read(priv, buf->buf, buf->size); + ret = push_rx(priv, buf->buf, rx_size); + if (ret) + return 0; + } while (rx_size == buf->size); + + return PCH_UART_HANDLED_RX_INT; +} + +static int handle_rx(struct eg20t_port *priv) +{ + return handle_rx_to(priv); +} + +static int dma_handle_rx(struct eg20t_port *priv) +{ + struct uart_port *port = &priv->port; + struct dma_async_tx_descriptor *desc; + struct scatterlist *sg; + + priv = container_of(port, struct eg20t_port, port); + sg = &priv->sg_rx; + + sg_init_table(&priv->sg_rx, 1); /* Initialize SG table */ + + sg_dma_len(sg) = priv->trigger_level; + + sg_set_page(&priv->sg_rx, virt_to_page(priv->rx_buf_virt), + sg_dma_len(sg), offset_in_page(priv->rx_buf_virt)); + + sg_dma_address(sg) = priv->rx_buf_dma; + + desc = dmaengine_prep_slave_sg(priv->chan_rx, + sg, 1, DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + + if (!desc) + return 0; + + priv->desc_rx = desc; + desc->callback = pch_dma_rx_complete; + desc->callback_param = priv; + desc->tx_submit(desc); + dma_async_issue_pending(priv->chan_rx); + + return PCH_UART_HANDLED_RX_INT; +} + +static unsigned int handle_tx(struct eg20t_port *priv) +{ + struct uart_port *port = &priv->port; + struct circ_buf *xmit = &port->state->xmit; + int fifo_size; + int tx_size; + int size; + int tx_empty; + + if (!priv->start_tx) { + dev_info(priv->port.dev, "%s:Tx isn't started. (%lu)\n", + __func__, jiffies); + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); + priv->tx_empty = 1; + return 0; + } + + fifo_size = max(priv->fifo_size, 1); + tx_empty = 1; + if (port->x_char) { + pch_uart_hal_write(priv, &port->x_char, 1); + port->icount.tx++; + port->x_char = 0; + tx_empty = 0; + fifo_size--; + } + size = min(xmit->head - xmit->tail, fifo_size); + if (size < 0) + size = fifo_size; + + tx_size = pop_tx(priv, size); + if (tx_size > 0) { + port->icount.tx += tx_size; + tx_empty = 0; + } + + priv->tx_empty = tx_empty; + + if (tx_empty) { + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); + uart_write_wakeup(port); + } + + return PCH_UART_HANDLED_TX_INT; +} + +static unsigned int dma_handle_tx(struct eg20t_port *priv) +{ + struct uart_port *port = &priv->port; + struct circ_buf *xmit = &port->state->xmit; + struct scatterlist *sg; + int nent; + int fifo_size; + struct dma_async_tx_descriptor *desc; + int num; + int i; + int bytes; + int size; + int rem; + + if (!priv->start_tx) { + dev_info(priv->port.dev, "%s:Tx isn't started. (%lu)\n", + __func__, jiffies); + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); + priv->tx_empty = 1; + return 0; + } + + if (priv->tx_dma_use) { + dev_dbg(priv->port.dev, "%s:Tx is not completed. (%lu)\n", + __func__, jiffies); + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); + priv->tx_empty = 1; + return 0; + } + + fifo_size = max(priv->fifo_size, 1); + + if (port->x_char) { + pch_uart_hal_write(priv, &port->x_char, 1); + port->icount.tx++; + port->x_char = 0; + fifo_size--; + } + + bytes = min((int)CIRC_CNT(xmit->head, xmit->tail, + UART_XMIT_SIZE), CIRC_CNT_TO_END(xmit->head, + xmit->tail, UART_XMIT_SIZE)); + if (!bytes) { + dev_dbg(priv->port.dev, "%s 0 bytes return\n", __func__); + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); + uart_write_wakeup(port); + return 0; + } + + if (bytes > fifo_size) { + num = bytes / fifo_size + 1; + size = fifo_size; + rem = bytes % fifo_size; + } else { + num = 1; + size = bytes; + rem = bytes; + } + + dev_dbg(priv->port.dev, "%s num=%d size=%d rem=%d\n", + __func__, num, size, rem); + + priv->tx_dma_use = 1; + + priv->sg_tx_p = kmalloc_array(num, sizeof(struct scatterlist), GFP_ATOMIC); + if (!priv->sg_tx_p) { + dev_err(priv->port.dev, "%s:kzalloc Failed\n", __func__); + return 0; + } + + sg_init_table(priv->sg_tx_p, num); /* Initialize SG table */ + sg = priv->sg_tx_p; + + for (i = 0; i < num; i++, sg++) { + if (i == (num - 1)) + sg_set_page(sg, virt_to_page(xmit->buf), + rem, fifo_size * i); + else + sg_set_page(sg, virt_to_page(xmit->buf), + size, fifo_size * i); + } + + sg = priv->sg_tx_p; + nent = dma_map_sg(port->dev, sg, num, DMA_TO_DEVICE); + if (!nent) { + dev_err(priv->port.dev, "%s:dma_map_sg Failed\n", __func__); + return 0; + } + priv->orig_nent = num; + priv->nent = nent; + + for (i = 0; i < nent; i++, sg++) { + sg->offset = (xmit->tail & (UART_XMIT_SIZE - 1)) + + fifo_size * i; + sg_dma_address(sg) = (sg_dma_address(sg) & + ~(UART_XMIT_SIZE - 1)) + sg->offset; + if (i == (nent - 1)) + sg_dma_len(sg) = rem; + else + sg_dma_len(sg) = size; + } + + desc = dmaengine_prep_slave_sg(priv->chan_tx, + priv->sg_tx_p, nent, DMA_MEM_TO_DEV, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) { + dev_err(priv->port.dev, "%s:dmaengine_prep_slave_sg Failed\n", + __func__); + return 0; + } + dma_sync_sg_for_device(port->dev, priv->sg_tx_p, nent, DMA_TO_DEVICE); + priv->desc_tx = desc; + desc->callback = pch_dma_tx_complete; + desc->callback_param = priv; + + desc->tx_submit(desc); + + dma_async_issue_pending(priv->chan_tx); + + return PCH_UART_HANDLED_TX_INT; +} + +static void pch_uart_err_ir(struct eg20t_port *priv, unsigned int lsr) +{ + struct uart_port *port = &priv->port; + struct tty_struct *tty = tty_port_tty_get(&port->state->port); + char *error_msg[5] = {}; + int i = 0; + + if (lsr & PCH_UART_LSR_ERR) + error_msg[i++] = "Error data in FIFO\n"; + + if (lsr & UART_LSR_FE) { + port->icount.frame++; + error_msg[i++] = " Framing Error\n"; + } + + if (lsr & UART_LSR_PE) { + port->icount.parity++; + error_msg[i++] = " Parity Error\n"; + } + + if (lsr & UART_LSR_OE) { + port->icount.overrun++; + error_msg[i++] = " Overrun Error\n"; + } + + if (tty == NULL) { + for (i = 0; error_msg[i] != NULL; i++) + dev_err(&priv->pdev->dev, error_msg[i]); + } else { + tty_kref_put(tty); + } +} + +static irqreturn_t pch_uart_interrupt(int irq, void *dev_id) +{ + struct eg20t_port *priv = dev_id; + unsigned int handled; + u8 lsr; + int ret = 0; + unsigned char iid; + unsigned long flags; + int next = 1; + u8 msr; + + spin_lock_irqsave(&priv->lock, flags); + handled = 0; + while (next) { + iid = pch_uart_hal_get_iid(priv); + if (iid & PCH_UART_IIR_IP) /* No Interrupt */ + break; + switch (iid) { + case PCH_UART_IID_RLS: /* Receiver Line Status */ + lsr = pch_uart_hal_get_line_status(priv); + if (lsr & (PCH_UART_LSR_ERR | UART_LSR_FE | + UART_LSR_PE | UART_LSR_OE)) { + pch_uart_err_ir(priv, lsr); + ret = PCH_UART_HANDLED_RX_ERR_INT; + } else { + ret = PCH_UART_HANDLED_LS_INT; + } + break; + case PCH_UART_IID_RDR: /* Received Data Ready */ + if (priv->use_dma) { + pch_uart_hal_disable_interrupt(priv, + PCH_UART_HAL_RX_INT | + PCH_UART_HAL_RX_ERR_INT); + ret = dma_handle_rx(priv); + if (!ret) + pch_uart_hal_enable_interrupt(priv, + PCH_UART_HAL_RX_INT | + PCH_UART_HAL_RX_ERR_INT); + } else { + ret = handle_rx(priv); + } + break; + case PCH_UART_IID_RDR_TO: /* Received Data Ready + (FIFO Timeout) */ + ret = handle_rx_to(priv); + break; + case PCH_UART_IID_THRE: /* Transmitter Holding Register + Empty */ + if (priv->use_dma) + ret = dma_handle_tx(priv); + else + ret = handle_tx(priv); + break; + case PCH_UART_IID_MS: /* Modem Status */ + msr = pch_uart_hal_get_modem(priv); + next = 0; /* MS ir prioirty is the lowest. So, MS ir + means final interrupt */ + if ((msr & UART_MSR_ANY_DELTA) == 0) + break; + ret |= PCH_UART_HANDLED_MS_INT; + break; + default: /* Never junp to this label */ + dev_err(priv->port.dev, "%s:iid=%02x (%lu)\n", __func__, + iid, jiffies); + ret = -1; + next = 0; + break; + } + handled |= (unsigned int)ret; + } + + spin_unlock_irqrestore(&priv->lock, flags); + return IRQ_RETVAL(handled); +} + +/* This function tests whether the transmitter fifo and shifter for the port + described by 'port' is empty. */ +static unsigned int pch_uart_tx_empty(struct uart_port *port) +{ + struct eg20t_port *priv; + + priv = container_of(port, struct eg20t_port, port); + if (priv->tx_empty) + return TIOCSER_TEMT; + else + return 0; +} + +/* Returns the current state of modem control inputs. */ +static unsigned int pch_uart_get_mctrl(struct uart_port *port) +{ + struct eg20t_port *priv; + u8 modem; + unsigned int ret = 0; + + priv = container_of(port, struct eg20t_port, port); + modem = pch_uart_hal_get_modem(priv); + + if (modem & UART_MSR_DCD) + ret |= TIOCM_CAR; + + if (modem & UART_MSR_RI) + ret |= TIOCM_RNG; + + if (modem & UART_MSR_DSR) + ret |= TIOCM_DSR; + + if (modem & UART_MSR_CTS) + ret |= TIOCM_CTS; + + return ret; +} + +static void pch_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + u32 mcr = 0; + struct eg20t_port *priv = container_of(port, struct eg20t_port, port); + + if (mctrl & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (mctrl & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (mctrl & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + if (priv->mcr & UART_MCR_AFE) + mcr |= UART_MCR_AFE; + + if (mctrl) + iowrite8(mcr, priv->membase + UART_MCR); +} + +static void pch_uart_stop_tx(struct uart_port *port) +{ + struct eg20t_port *priv; + priv = container_of(port, struct eg20t_port, port); + priv->start_tx = 0; + priv->tx_dma_use = 0; +} + +static void pch_uart_start_tx(struct uart_port *port) +{ + struct eg20t_port *priv; + + priv = container_of(port, struct eg20t_port, port); + + if (priv->use_dma) { + if (priv->tx_dma_use) { + dev_dbg(priv->port.dev, "%s : Tx DMA is NOT empty.\n", + __func__); + return; + } + } + + priv->start_tx = 1; + pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT); +} + +static void pch_uart_stop_rx(struct uart_port *port) +{ + struct eg20t_port *priv; + priv = container_of(port, struct eg20t_port, port); + priv->start_rx = 0; + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT | + PCH_UART_HAL_RX_ERR_INT); +} + +/* Enable the modem status interrupts. */ +static void pch_uart_enable_ms(struct uart_port *port) +{ + struct eg20t_port *priv; + priv = container_of(port, struct eg20t_port, port); + pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_MS_INT); +} + +/* Control the transmission of a break signal. */ +static void pch_uart_break_ctl(struct uart_port *port, int ctl) +{ + struct eg20t_port *priv; + unsigned long flags; + + priv = container_of(port, struct eg20t_port, port); + spin_lock_irqsave(&priv->lock, flags); + pch_uart_hal_set_break(priv, ctl); + spin_unlock_irqrestore(&priv->lock, flags); +} + +/* Grab any interrupt resources and initialise any low level driver state. */ +static int pch_uart_startup(struct uart_port *port) +{ + struct eg20t_port *priv; + int ret; + int fifo_size; + int trigger_level; + + priv = container_of(port, struct eg20t_port, port); + priv->tx_empty = 1; + + if (port->uartclk) + priv->uartclk = port->uartclk; + else + port->uartclk = priv->uartclk; + + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT); + ret = pch_uart_hal_set_line(priv, default_baud, + PCH_UART_HAL_PARITY_NONE, PCH_UART_HAL_8BIT, + PCH_UART_HAL_STB1); + if (ret) + return ret; + + switch (priv->fifo_size) { + case 256: + fifo_size = PCH_UART_HAL_FIFO256; + break; + case 64: + fifo_size = PCH_UART_HAL_FIFO64; + break; + case 16: + fifo_size = PCH_UART_HAL_FIFO16; + break; + case 1: + default: + fifo_size = PCH_UART_HAL_FIFO_DIS; + break; + } + + switch (priv->trigger) { + case PCH_UART_HAL_TRIGGER1: + trigger_level = 1; + break; + case PCH_UART_HAL_TRIGGER_L: + trigger_level = priv->fifo_size / 4; + break; + case PCH_UART_HAL_TRIGGER_M: + trigger_level = priv->fifo_size / 2; + break; + case PCH_UART_HAL_TRIGGER_H: + default: + trigger_level = priv->fifo_size - (priv->fifo_size / 8); + break; + } + + priv->trigger_level = trigger_level; + ret = pch_uart_hal_set_fifo(priv, PCH_UART_HAL_DMA_MODE0, + fifo_size, priv->trigger); + if (ret < 0) + return ret; + + ret = request_irq(priv->port.irq, pch_uart_interrupt, IRQF_SHARED, + priv->irq_name, priv); + if (ret < 0) + return ret; + + if (priv->use_dma) + pch_request_dma(port); + + priv->start_rx = 1; + pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT | + PCH_UART_HAL_RX_ERR_INT); + uart_update_timeout(port, CS8, default_baud); + + return 0; +} + +static void pch_uart_shutdown(struct uart_port *port) +{ + struct eg20t_port *priv; + int ret; + + priv = container_of(port, struct eg20t_port, port); + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT); + pch_uart_hal_fifo_reset(priv, PCH_UART_HAL_CLR_ALL_FIFO); + ret = pch_uart_hal_set_fifo(priv, PCH_UART_HAL_DMA_MODE0, + PCH_UART_HAL_FIFO_DIS, PCH_UART_HAL_TRIGGER1); + if (ret) + dev_err(priv->port.dev, + "pch_uart_hal_set_fifo Failed(ret=%d)\n", ret); + + pch_free_dma(port); + + free_irq(priv->port.irq, priv); +} + +/* Change the port parameters, including word length, parity, stop + *bits. Update read_status_mask and ignore_status_mask to indicate + *the types of events we are interested in receiving. */ +static void pch_uart_set_termios(struct uart_port *port, + struct ktermios *termios, struct ktermios *old) +{ + int rtn; + unsigned int baud, parity, bits, stb; + struct eg20t_port *priv; + unsigned long flags; + + priv = container_of(port, struct eg20t_port, port); + switch (termios->c_cflag & CSIZE) { + case CS5: + bits = PCH_UART_HAL_5BIT; + break; + case CS6: + bits = PCH_UART_HAL_6BIT; + break; + case CS7: + bits = PCH_UART_HAL_7BIT; + break; + default: /* CS8 */ + bits = PCH_UART_HAL_8BIT; + break; + } + if (termios->c_cflag & CSTOPB) + stb = PCH_UART_HAL_STB2; + else + stb = PCH_UART_HAL_STB1; + + if (termios->c_cflag & PARENB) { + if (termios->c_cflag & PARODD) + parity = PCH_UART_HAL_PARITY_ODD; + else + parity = PCH_UART_HAL_PARITY_EVEN; + + } else + parity = PCH_UART_HAL_PARITY_NONE; + + /* Only UART0 has auto hardware flow function */ + if ((termios->c_cflag & CRTSCTS) && (priv->fifo_size == 256)) + priv->mcr |= UART_MCR_AFE; + else + priv->mcr &= ~UART_MCR_AFE; + + termios->c_cflag &= ~CMSPAR; /* Mark/Space parity is not supported */ + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); + + spin_lock_irqsave(&priv->lock, flags); + spin_lock(&port->lock); + + uart_update_timeout(port, termios->c_cflag, baud); + rtn = pch_uart_hal_set_line(priv, baud, parity, bits, stb); + if (rtn) + goto out; + + pch_uart_set_mctrl(&priv->port, priv->port.mctrl); + /* Don't rewrite B0 */ + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, baud, baud); + +out: + spin_unlock(&port->lock); + spin_unlock_irqrestore(&priv->lock, flags); +} + +static const char *pch_uart_type(struct uart_port *port) +{ + return KBUILD_MODNAME; +} + +static void pch_uart_release_port(struct uart_port *port) +{ + struct eg20t_port *priv; + + priv = container_of(port, struct eg20t_port, port); + pci_iounmap(priv->pdev, priv->membase); + pci_release_regions(priv->pdev); +} + +static int pch_uart_request_port(struct uart_port *port) +{ + struct eg20t_port *priv; + int ret; + void __iomem *membase; + + priv = container_of(port, struct eg20t_port, port); + ret = pci_request_regions(priv->pdev, KBUILD_MODNAME); + if (ret < 0) + return -EBUSY; + + membase = pci_iomap(priv->pdev, 1, 0); + if (!membase) { + pci_release_regions(priv->pdev); + return -EBUSY; + } + priv->membase = port->membase = membase; + + return 0; +} + +static void pch_uart_config_port(struct uart_port *port, int type) +{ + struct eg20t_port *priv; + + priv = container_of(port, struct eg20t_port, port); + if (type & UART_CONFIG_TYPE) { + port->type = priv->port_type; + pch_uart_request_port(port); + } +} + +static int pch_uart_verify_port(struct uart_port *port, + struct serial_struct *serinfo) +{ + struct eg20t_port *priv; + + priv = container_of(port, struct eg20t_port, port); + if (serinfo->flags & UPF_LOW_LATENCY) { + dev_info(priv->port.dev, + "PCH UART : Use PIO Mode (without DMA)\n"); + priv->use_dma = 0; + serinfo->flags &= ~UPF_LOW_LATENCY; + } else { +#ifndef CONFIG_PCH_DMA + dev_err(priv->port.dev, "%s : PCH DMA is not Loaded.\n", + __func__); + return -EOPNOTSUPP; +#endif + if (!priv->use_dma) { + pch_request_dma(port); + if (priv->chan_rx) + priv->use_dma = 1; + } + dev_info(priv->port.dev, "PCH UART: %s\n", + priv->use_dma ? + "Use DMA Mode" : "No DMA"); + } + + return 0; +} + +#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_PCH_UART_CONSOLE) +/* + * Wait for transmitter & holding register to empty + */ +static void wait_for_xmitr(struct eg20t_port *up, int bits) +{ + unsigned int status, tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + for (;;) { + status = ioread8(up->membase + UART_LSR); + + if ((status & bits) == bits) + break; + if (--tmout == 0) + break; + udelay(1); + } + + /* Wait up to 1s for flow control if necessary */ + if (up->port.flags & UPF_CONS_FLOW) { + unsigned int tmout; + for (tmout = 1000000; tmout; tmout--) { + unsigned int msr = ioread8(up->membase + UART_MSR); + if (msr & UART_MSR_CTS) + break; + udelay(1); + touch_nmi_watchdog(); + } + } +} +#endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_PCH_UART_CONSOLE */ + +#ifdef CONFIG_CONSOLE_POLL +/* + * Console polling routines for communicate via uart while + * in an interrupt or debug context. + */ +static int pch_uart_get_poll_char(struct uart_port *port) +{ + struct eg20t_port *priv = + container_of(port, struct eg20t_port, port); + u8 lsr = ioread8(priv->membase + UART_LSR); + + if (!(lsr & UART_LSR_DR)) + return NO_POLL_CHAR; + + return ioread8(priv->membase + PCH_UART_RBR); +} + + +static void pch_uart_put_poll_char(struct uart_port *port, + unsigned char c) +{ + unsigned int ier; + struct eg20t_port *priv = + container_of(port, struct eg20t_port, port); + + /* + * First save the IER then disable the interrupts + */ + ier = ioread8(priv->membase + UART_IER); + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT); + + wait_for_xmitr(priv, UART_LSR_THRE); + /* + * Send the character out. + */ + iowrite8(c, priv->membase + PCH_UART_THR); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(priv, BOTH_EMPTY); + iowrite8(ier, priv->membase + UART_IER); +} +#endif /* CONFIG_CONSOLE_POLL */ + +static const struct uart_ops pch_uart_ops = { + .tx_empty = pch_uart_tx_empty, + .set_mctrl = pch_uart_set_mctrl, + .get_mctrl = pch_uart_get_mctrl, + .stop_tx = pch_uart_stop_tx, + .start_tx = pch_uart_start_tx, + .stop_rx = pch_uart_stop_rx, + .enable_ms = pch_uart_enable_ms, + .break_ctl = pch_uart_break_ctl, + .startup = pch_uart_startup, + .shutdown = pch_uart_shutdown, + .set_termios = pch_uart_set_termios, +/* .pm = pch_uart_pm, Not supported yet */ + .type = pch_uart_type, + .release_port = pch_uart_release_port, + .request_port = pch_uart_request_port, + .config_port = pch_uart_config_port, + .verify_port = pch_uart_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = pch_uart_get_poll_char, + .poll_put_char = pch_uart_put_poll_char, +#endif +}; + +#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE + +static void pch_console_putchar(struct uart_port *port, int ch) +{ + struct eg20t_port *priv = + container_of(port, struct eg20t_port, port); + + wait_for_xmitr(priv, UART_LSR_THRE); + iowrite8(ch, priv->membase + PCH_UART_THR); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console_lock must be held when we get here. + */ +static void +pch_console_write(struct console *co, const char *s, unsigned int count) +{ + struct eg20t_port *priv; + unsigned long flags; + int priv_locked = 1; + int port_locked = 1; + u8 ier; + + priv = pch_uart_ports[co->index]; + + touch_nmi_watchdog(); + + local_irq_save(flags); + if (priv->port.sysrq) { + /* call to uart_handle_sysrq_char already took the priv lock */ + priv_locked = 0; + /* serial8250_handle_port() already took the port lock */ + port_locked = 0; + } else if (oops_in_progress) { + priv_locked = spin_trylock(&priv->lock); + port_locked = spin_trylock(&priv->port.lock); + } else { + spin_lock(&priv->lock); + spin_lock(&priv->port.lock); + } + + /* + * First save the IER then disable the interrupts + */ + ier = ioread8(priv->membase + UART_IER); + + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT); + + uart_console_write(&priv->port, s, count, pch_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(priv, BOTH_EMPTY); + iowrite8(ier, priv->membase + UART_IER); + + if (port_locked) + spin_unlock(&priv->port.lock); + if (priv_locked) + spin_unlock(&priv->lock); + local_irq_restore(flags); +} + +static int __init pch_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = default_baud; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= PCH_UART_NR) + co->index = 0; + port = &pch_uart_ports[co->index]->port; + + if (!port || (!port->iobase && !port->membase)) + return -ENODEV; + + port->uartclk = pch_uart_get_uartclk(); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver pch_uart_driver; + +static struct console pch_console = { + .name = PCH_UART_DRIVER_DEVICE, + .write = pch_console_write, + .device = uart_console_device, + .setup = pch_console_setup, + .flags = CON_PRINTBUFFER | CON_ANYTIME, + .index = -1, + .data = &pch_uart_driver, +}; + +#define PCH_CONSOLE (&pch_console) +#else +#define PCH_CONSOLE NULL +#endif /* CONFIG_SERIAL_PCH_UART_CONSOLE */ + +static struct uart_driver pch_uart_driver = { + .owner = THIS_MODULE, + .driver_name = KBUILD_MODNAME, + .dev_name = PCH_UART_DRIVER_DEVICE, + .major = 0, + .minor = 0, + .nr = PCH_UART_NR, + .cons = PCH_CONSOLE, +}; + +static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct eg20t_port *priv; + int ret; + unsigned int iobase; + unsigned int mapbase; + unsigned char *rxbuf; + int fifosize; + int port_type; + struct pch_uart_driver_data *board; +#ifdef CONFIG_DEBUG_FS + char name[32]; /* for debugfs file name */ +#endif + + board = &drv_dat[id->driver_data]; + port_type = board->port_type; + + priv = kzalloc(sizeof(struct eg20t_port), GFP_KERNEL); + if (priv == NULL) + goto init_port_alloc_err; + + rxbuf = (unsigned char *)__get_free_page(GFP_KERNEL); + if (!rxbuf) + goto init_port_free_txbuf; + + switch (port_type) { + case PORT_PCH_8LINE: + fifosize = 256; /* EG20T/ML7213: UART0 */ + break; + case PORT_PCH_2LINE: + fifosize = 64; /* EG20T:UART1~3 ML7213: UART1~2*/ + break; + default: + dev_err(&pdev->dev, "Invalid Port Type(=%d)\n", port_type); + goto init_port_hal_free; + } + + pci_enable_msi(pdev); + pci_set_master(pdev); + + spin_lock_init(&priv->lock); + + iobase = pci_resource_start(pdev, 0); + mapbase = pci_resource_start(pdev, 1); + priv->mapbase = mapbase; + priv->iobase = iobase; + priv->pdev = pdev; + priv->tx_empty = 1; + priv->rxbuf.buf = rxbuf; + priv->rxbuf.size = PAGE_SIZE; + + priv->fifo_size = fifosize; + priv->uartclk = pch_uart_get_uartclk(); + priv->port_type = port_type; + priv->port.dev = &pdev->dev; + priv->port.iobase = iobase; + priv->port.membase = NULL; + priv->port.mapbase = mapbase; + priv->port.irq = pdev->irq; + priv->port.iotype = UPIO_PORT; + priv->port.ops = &pch_uart_ops; + priv->port.flags = UPF_BOOT_AUTOCONF; + priv->port.fifosize = fifosize; + priv->port.line = board->line_no; + priv->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_PCH_UART_CONSOLE); + priv->trigger = PCH_UART_HAL_TRIGGER_M; + + snprintf(priv->irq_name, IRQ_NAME_SIZE, + KBUILD_MODNAME ":" PCH_UART_DRIVER_DEVICE "%d", + priv->port.line); + + spin_lock_init(&priv->port.lock); + + pci_set_drvdata(pdev, priv); + priv->trigger_level = 1; + priv->fcr = 0; + + if (pdev->dev.of_node) + of_property_read_u32(pdev->dev.of_node, "clock-frequency" + , &user_uartclk); + +#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE + pch_uart_ports[board->line_no] = priv; +#endif + ret = uart_add_one_port(&pch_uart_driver, &priv->port); + if (ret < 0) + goto init_port_hal_free; + +#ifdef CONFIG_DEBUG_FS + snprintf(name, sizeof(name), "uart%d_regs", board->line_no); + priv->debugfs = debugfs_create_file(name, S_IFREG | S_IRUGO, + NULL, priv, &port_regs_ops); +#endif + + return priv; + +init_port_hal_free: +#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE + pch_uart_ports[board->line_no] = NULL; +#endif + free_page((unsigned long)rxbuf); +init_port_free_txbuf: + kfree(priv); +init_port_alloc_err: + + return NULL; +} + +static void pch_uart_exit_port(struct eg20t_port *priv) +{ + +#ifdef CONFIG_DEBUG_FS + debugfs_remove(priv->debugfs); +#endif + uart_remove_one_port(&pch_uart_driver, &priv->port); + free_page((unsigned long)priv->rxbuf.buf); +} + +static void pch_uart_pci_remove(struct pci_dev *pdev) +{ + struct eg20t_port *priv = pci_get_drvdata(pdev); + + pci_disable_msi(pdev); + +#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE + pch_uart_ports[priv->port.line] = NULL; +#endif + pch_uart_exit_port(priv); + pci_disable_device(pdev); + kfree(priv); + return; +} + +static int __maybe_unused pch_uart_pci_suspend(struct device *dev) +{ + struct eg20t_port *priv = dev_get_drvdata(dev); + + uart_suspend_port(&pch_uart_driver, &priv->port); + + return 0; +} + +static int __maybe_unused pch_uart_pci_resume(struct device *dev) +{ + struct eg20t_port *priv = dev_get_drvdata(dev); + + uart_resume_port(&pch_uart_driver, &priv->port); + + return 0; +} + +static const struct pci_device_id pch_uart_pci_id[] = { + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8811), + .driver_data = pch_et20t_uart0}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8812), + .driver_data = pch_et20t_uart1}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8813), + .driver_data = pch_et20t_uart2}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8814), + .driver_data = pch_et20t_uart3}, + {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8027), + .driver_data = pch_ml7213_uart0}, + {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8028), + .driver_data = pch_ml7213_uart1}, + {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8029), + .driver_data = pch_ml7213_uart2}, + {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x800C), + .driver_data = pch_ml7223_uart0}, + {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x800D), + .driver_data = pch_ml7223_uart1}, + {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8811), + .driver_data = pch_ml7831_uart0}, + {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8812), + .driver_data = pch_ml7831_uart1}, + {0,}, +}; + +static int pch_uart_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + int ret; + struct eg20t_port *priv; + + ret = pci_enable_device(pdev); + if (ret < 0) + goto probe_error; + + priv = pch_uart_init_port(pdev, id); + if (!priv) { + ret = -EBUSY; + goto probe_disable_device; + } + pci_set_drvdata(pdev, priv); + + return ret; + +probe_disable_device: + pci_disable_msi(pdev); + pci_disable_device(pdev); +probe_error: + return ret; +} + +static SIMPLE_DEV_PM_OPS(pch_uart_pci_pm_ops, + pch_uart_pci_suspend, + pch_uart_pci_resume); + +static struct pci_driver pch_uart_pci_driver = { + .name = "pch_uart", + .id_table = pch_uart_pci_id, + .probe = pch_uart_pci_probe, + .remove = pch_uart_pci_remove, + .driver.pm = &pch_uart_pci_pm_ops, +}; + +static int __init pch_uart_module_init(void) +{ + int ret; + + /* register as UART driver */ + ret = uart_register_driver(&pch_uart_driver); + if (ret < 0) + return ret; + + /* register as PCI driver */ + ret = pci_register_driver(&pch_uart_pci_driver); + if (ret < 0) + uart_unregister_driver(&pch_uart_driver); + + return ret; +} +module_init(pch_uart_module_init); + +static void __exit pch_uart_module_exit(void) +{ + pci_unregister_driver(&pch_uart_pci_driver); + uart_unregister_driver(&pch_uart_driver); +} +module_exit(pch_uart_module_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Intel EG20T PCH UART PCI Driver"); +MODULE_DEVICE_TABLE(pci, pch_uart_pci_id); + +module_param(default_baud, uint, S_IRUGO); +MODULE_PARM_DESC(default_baud, + "Default BAUD for initial driver state and console (default 9600)"); +module_param(user_uartclk, uint, S_IRUGO); +MODULE_PARM_DESC(user_uartclk, + "Override UART default or board specific UART clock"); diff --git a/drivers/tty/serial/pic32_uart.c b/drivers/tty/serial/pic32_uart.c new file mode 100644 index 000000000..0a12fb11e --- /dev/null +++ b/drivers/tty/serial/pic32_uart.c @@ -0,0 +1,953 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * PIC32 Integrated Serial Driver. + * + * Copyright (C) 2015 Microchip Technology, Inc. + * + * Authors: + * Sorin-Andrei Pistirica + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include "pic32_uart.h" + +/* UART name and device definitions */ +#define PIC32_DEV_NAME "pic32-uart" +#define PIC32_MAX_UARTS 6 +#define PIC32_SDEV_NAME "ttyPIC" + +/* pic32_sport pointer for console use */ +static struct pic32_sport *pic32_sports[PIC32_MAX_UARTS]; + +static inline void pic32_wait_deplete_txbuf(struct pic32_sport *sport) +{ + /* wait for tx empty, otherwise chars will be lost or corrupted */ + while (!(pic32_uart_readl(sport, PIC32_UART_STA) & PIC32_UART_STA_TRMT)) + udelay(1); +} + +static inline int pic32_enable_clock(struct pic32_sport *sport) +{ + int ret = clk_prepare_enable(sport->clk); + + if (ret) + return ret; + + sport->ref_clk++; + return 0; +} + +static inline void pic32_disable_clock(struct pic32_sport *sport) +{ + sport->ref_clk--; + clk_disable_unprepare(sport->clk); +} + +/* serial core request to check if uart tx buffer is empty */ +static unsigned int pic32_uart_tx_empty(struct uart_port *port) +{ + struct pic32_sport *sport = to_pic32_sport(port); + u32 val = pic32_uart_readl(sport, PIC32_UART_STA); + + return (val & PIC32_UART_STA_TRMT) ? 1 : 0; +} + +/* serial core request to set UART outputs */ +static void pic32_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct pic32_sport *sport = to_pic32_sport(port); + + /* set loopback mode */ + if (mctrl & TIOCM_LOOP) + pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE), + PIC32_UART_MODE_LPBK); + else + pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), + PIC32_UART_MODE_LPBK); +} + +/* get the state of CTS input pin for this port */ +static unsigned int get_cts_state(struct pic32_sport *sport) +{ + /* read and invert UxCTS */ + if (gpio_is_valid(sport->cts_gpio)) + return !gpio_get_value(sport->cts_gpio); + + return 1; +} + +/* serial core request to return the state of misc UART input pins */ +static unsigned int pic32_uart_get_mctrl(struct uart_port *port) +{ + struct pic32_sport *sport = to_pic32_sport(port); + unsigned int mctrl = 0; + + if (!sport->hw_flow_ctrl) + mctrl |= TIOCM_CTS; + else if (get_cts_state(sport)) + mctrl |= TIOCM_CTS; + + /* DSR and CD are not supported in PIC32, so return 1 + * RI is not supported in PIC32, so return 0 + */ + mctrl |= TIOCM_CD; + mctrl |= TIOCM_DSR; + + return mctrl; +} + +/* stop tx and start tx are not called in pairs, therefore a flag indicates + * the status of irq to control the irq-depth. + */ +static inline void pic32_uart_irqtxen(struct pic32_sport *sport, u8 en) +{ + if (en && !tx_irq_enabled(sport)) { + enable_irq(sport->irq_tx); + tx_irq_enabled(sport) = 1; + } else if (!en && tx_irq_enabled(sport)) { + /* use disable_irq_nosync() and not disable_irq() to avoid self + * imposed deadlock by not waiting for irq handler to end, + * since this callback is called from interrupt context. + */ + disable_irq_nosync(sport->irq_tx); + tx_irq_enabled(sport) = 0; + } +} + +/* serial core request to disable tx ASAP (used for flow control) */ +static void pic32_uart_stop_tx(struct uart_port *port) +{ + struct pic32_sport *sport = to_pic32_sport(port); + + if (!(pic32_uart_readl(sport, PIC32_UART_MODE) & PIC32_UART_MODE_ON)) + return; + + if (!(pic32_uart_readl(sport, PIC32_UART_STA) & PIC32_UART_STA_UTXEN)) + return; + + /* wait for tx empty */ + pic32_wait_deplete_txbuf(sport); + + pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA), + PIC32_UART_STA_UTXEN); + pic32_uart_irqtxen(sport, 0); +} + +/* serial core request to (re)enable tx */ +static void pic32_uart_start_tx(struct uart_port *port) +{ + struct pic32_sport *sport = to_pic32_sport(port); + + pic32_uart_irqtxen(sport, 1); + pic32_uart_writel(sport, PIC32_SET(PIC32_UART_STA), + PIC32_UART_STA_UTXEN); +} + +/* serial core request to stop rx, called before port shutdown */ +static void pic32_uart_stop_rx(struct uart_port *port) +{ + struct pic32_sport *sport = to_pic32_sport(port); + + /* disable rx interrupts */ + disable_irq(sport->irq_rx); + + /* receiver Enable bit OFF */ + pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA), + PIC32_UART_STA_URXEN); +} + +/* serial core request to start/stop emitting break char */ +static void pic32_uart_break_ctl(struct uart_port *port, int ctl) +{ + struct pic32_sport *sport = to_pic32_sport(port); + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + if (ctl) + pic32_uart_writel(sport, PIC32_SET(PIC32_UART_STA), + PIC32_UART_STA_UTXBRK); + else + pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA), + PIC32_UART_STA_UTXBRK); + + spin_unlock_irqrestore(&port->lock, flags); +} + +/* get port type in string format */ +static const char *pic32_uart_type(struct uart_port *port) +{ + return (port->type == PORT_PIC32) ? PIC32_DEV_NAME : NULL; +} + +/* read all chars in rx fifo and send them to core */ +static void pic32_uart_do_rx(struct uart_port *port) +{ + struct pic32_sport *sport = to_pic32_sport(port); + struct tty_port *tty; + unsigned int max_count; + + /* limit number of char read in interrupt, should not be + * higher than fifo size anyway since we're much faster than + * serial port + */ + max_count = PIC32_UART_RX_FIFO_DEPTH; + + spin_lock(&port->lock); + + tty = &port->state->port; + + do { + u32 sta_reg, c; + char flag; + + /* get overrun/fifo empty information from status register */ + sta_reg = pic32_uart_readl(sport, PIC32_UART_STA); + if (unlikely(sta_reg & PIC32_UART_STA_OERR)) { + + /* fifo reset is required to clear interrupt */ + pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA), + PIC32_UART_STA_OERR); + + port->icount.overrun++; + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + } + + /* Can at least one more character can be read? */ + if (!(sta_reg & PIC32_UART_STA_URXDA)) + break; + + /* read the character and increment the rx counter */ + c = pic32_uart_readl(sport, PIC32_UART_RX); + + port->icount.rx++; + flag = TTY_NORMAL; + c &= 0xff; + + if (unlikely((sta_reg & PIC32_UART_STA_PERR) || + (sta_reg & PIC32_UART_STA_FERR))) { + + /* do stats first */ + if (sta_reg & PIC32_UART_STA_PERR) + port->icount.parity++; + if (sta_reg & PIC32_UART_STA_FERR) + port->icount.frame++; + + /* update flag wrt read_status_mask */ + sta_reg &= port->read_status_mask; + + if (sta_reg & PIC32_UART_STA_FERR) + flag = TTY_FRAME; + if (sta_reg & PIC32_UART_STA_PERR) + flag = TTY_PARITY; + } + + if (uart_handle_sysrq_char(port, c)) + continue; + + if ((sta_reg & port->ignore_status_mask) == 0) + tty_insert_flip_char(tty, c, flag); + + } while (--max_count); + + spin_unlock(&port->lock); + + tty_flip_buffer_push(tty); +} + +/* fill tx fifo with chars to send, stop when fifo is about to be full + * or when all chars have been sent. + */ +static void pic32_uart_do_tx(struct uart_port *port) +{ + struct pic32_sport *sport = to_pic32_sport(port); + struct circ_buf *xmit = &port->state->xmit; + unsigned int max_count = PIC32_UART_TX_FIFO_DEPTH; + + if (port->x_char) { + pic32_uart_writel(sport, PIC32_UART_TX, port->x_char); + port->icount.tx++; + port->x_char = 0; + return; + } + + if (uart_tx_stopped(port)) { + pic32_uart_stop_tx(port); + return; + } + + if (uart_circ_empty(xmit)) + goto txq_empty; + + /* keep stuffing chars into uart tx buffer + * 1) until uart fifo is full + * or + * 2) until the circ buffer is empty + * (all chars have been sent) + * or + * 3) until the max count is reached + * (prevents lingering here for too long in certain cases) + */ + while (!(PIC32_UART_STA_UTXBF & + pic32_uart_readl(sport, PIC32_UART_STA))) { + unsigned int c = xmit->buf[xmit->tail]; + + pic32_uart_writel(sport, PIC32_UART_TX, c); + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + if (--max_count == 0) + break; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + goto txq_empty; + + return; + +txq_empty: + pic32_uart_irqtxen(sport, 0); +} + +/* RX interrupt handler */ +static irqreturn_t pic32_uart_rx_interrupt(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + + pic32_uart_do_rx(port); + + return IRQ_HANDLED; +} + +/* TX interrupt handler */ +static irqreturn_t pic32_uart_tx_interrupt(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + pic32_uart_do_tx(port); + spin_unlock_irqrestore(&port->lock, flags); + + return IRQ_HANDLED; +} + +/* FAULT interrupt handler */ +static irqreturn_t pic32_uart_fault_interrupt(int irq, void *dev_id) +{ + /* do nothing: pic32_uart_do_rx() handles faults. */ + return IRQ_HANDLED; +} + +/* enable rx & tx operation on uart */ +static void pic32_uart_en_and_unmask(struct uart_port *port) +{ + struct pic32_sport *sport = to_pic32_sport(port); + + pic32_uart_writel(sport, PIC32_SET(PIC32_UART_STA), + PIC32_UART_STA_UTXEN | PIC32_UART_STA_URXEN); + pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE), + PIC32_UART_MODE_ON); +} + +/* disable rx & tx operation on uart */ +static void pic32_uart_dsbl_and_mask(struct uart_port *port) +{ + struct pic32_sport *sport = to_pic32_sport(port); + + /* wait for tx empty, otherwise chars will be lost or corrupted */ + pic32_wait_deplete_txbuf(sport); + + pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA), + PIC32_UART_STA_UTXEN | PIC32_UART_STA_URXEN); + pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), + PIC32_UART_MODE_ON); +} + +/* serial core request to initialize uart and start rx operation */ +static int pic32_uart_startup(struct uart_port *port) +{ + struct pic32_sport *sport = to_pic32_sport(port); + u32 dflt_baud = (port->uartclk / PIC32_UART_DFLT_BRATE / 16) - 1; + unsigned long flags; + int ret; + + local_irq_save(flags); + + ret = pic32_enable_clock(sport); + if (ret) { + local_irq_restore(flags); + goto out_done; + } + + /* clear status and mode registers */ + pic32_uart_writel(sport, PIC32_UART_MODE, 0); + pic32_uart_writel(sport, PIC32_UART_STA, 0); + + /* disable uart and mask all interrupts */ + pic32_uart_dsbl_and_mask(port); + + /* set default baud */ + pic32_uart_writel(sport, PIC32_UART_BRG, dflt_baud); + + local_irq_restore(flags); + + /* Each UART of a PIC32 has three interrupts therefore, + * we setup driver to register the 3 irqs for the device. + * + * For each irq request_irq() is called with interrupt disabled. + * And the irq is enabled as soon as we are ready to handle them. + */ + tx_irq_enabled(sport) = 0; + + sport->irq_fault_name = kasprintf(GFP_KERNEL, "%s%d-fault", + pic32_uart_type(port), + sport->idx); + if (!sport->irq_fault_name) { + dev_err(port->dev, "%s: kasprintf err!", __func__); + ret = -ENOMEM; + goto out_done; + } + irq_set_status_flags(sport->irq_fault, IRQ_NOAUTOEN); + ret = request_irq(sport->irq_fault, pic32_uart_fault_interrupt, + sport->irqflags_fault, sport->irq_fault_name, port); + if (ret) { + dev_err(port->dev, "%s: request irq(%d) err! ret:%d name:%s\n", + __func__, sport->irq_fault, ret, + pic32_uart_type(port)); + goto out_f; + } + + sport->irq_rx_name = kasprintf(GFP_KERNEL, "%s%d-rx", + pic32_uart_type(port), + sport->idx); + if (!sport->irq_rx_name) { + dev_err(port->dev, "%s: kasprintf err!", __func__); + ret = -ENOMEM; + goto out_f; + } + irq_set_status_flags(sport->irq_rx, IRQ_NOAUTOEN); + ret = request_irq(sport->irq_rx, pic32_uart_rx_interrupt, + sport->irqflags_rx, sport->irq_rx_name, port); + if (ret) { + dev_err(port->dev, "%s: request irq(%d) err! ret:%d name:%s\n", + __func__, sport->irq_rx, ret, + pic32_uart_type(port)); + goto out_r; + } + + sport->irq_tx_name = kasprintf(GFP_KERNEL, "%s%d-tx", + pic32_uart_type(port), + sport->idx); + if (!sport->irq_tx_name) { + dev_err(port->dev, "%s: kasprintf err!", __func__); + ret = -ENOMEM; + goto out_r; + } + irq_set_status_flags(sport->irq_tx, IRQ_NOAUTOEN); + ret = request_irq(sport->irq_tx, pic32_uart_tx_interrupt, + sport->irqflags_tx, sport->irq_tx_name, port); + if (ret) { + dev_err(port->dev, "%s: request irq(%d) err! ret:%d name:%s\n", + __func__, sport->irq_tx, ret, + pic32_uart_type(port)); + goto out_t; + } + + local_irq_save(flags); + + /* set rx interrupt on first receive */ + pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA), + PIC32_UART_STA_URXISEL1 | PIC32_UART_STA_URXISEL0); + + /* set interrupt on empty */ + pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA), + PIC32_UART_STA_UTXISEL1); + + /* enable all interrupts and eanable uart */ + pic32_uart_en_and_unmask(port); + + enable_irq(sport->irq_rx); + + return 0; + +out_t: + kfree(sport->irq_tx_name); + free_irq(sport->irq_tx, port); +out_r: + kfree(sport->irq_rx_name); + free_irq(sport->irq_rx, port); +out_f: + kfree(sport->irq_fault_name); + free_irq(sport->irq_fault, port); +out_done: + return ret; +} + +/* serial core request to flush & disable uart */ +static void pic32_uart_shutdown(struct uart_port *port) +{ + struct pic32_sport *sport = to_pic32_sport(port); + unsigned long flags; + + /* disable uart */ + spin_lock_irqsave(&port->lock, flags); + pic32_uart_dsbl_and_mask(port); + spin_unlock_irqrestore(&port->lock, flags); + pic32_disable_clock(sport); + + /* free all 3 interrupts for this UART */ + free_irq(sport->irq_fault, port); + free_irq(sport->irq_tx, port); + free_irq(sport->irq_rx, port); +} + +/* serial core request to change current uart setting */ +static void pic32_uart_set_termios(struct uart_port *port, + struct ktermios *new, + struct ktermios *old) +{ + struct pic32_sport *sport = to_pic32_sport(port); + unsigned int baud; + unsigned int quot; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + /* disable uart and mask all interrupts while changing speed */ + pic32_uart_dsbl_and_mask(port); + + /* stop bit options */ + if (new->c_cflag & CSTOPB) + pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE), + PIC32_UART_MODE_STSEL); + else + pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), + PIC32_UART_MODE_STSEL); + + /* parity options */ + if (new->c_cflag & PARENB) { + if (new->c_cflag & PARODD) { + pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE), + PIC32_UART_MODE_PDSEL1); + pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), + PIC32_UART_MODE_PDSEL0); + } else { + pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE), + PIC32_UART_MODE_PDSEL0); + pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), + PIC32_UART_MODE_PDSEL1); + } + } else { + pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), + PIC32_UART_MODE_PDSEL1 | + PIC32_UART_MODE_PDSEL0); + } + /* if hw flow ctrl, then the pins must be specified in device tree */ + if ((new->c_cflag & CRTSCTS) && sport->hw_flow_ctrl) { + /* enable hardware flow control */ + pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE), + PIC32_UART_MODE_UEN1); + pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), + PIC32_UART_MODE_UEN0); + pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), + PIC32_UART_MODE_RTSMD); + } else { + /* disable hardware flow control */ + pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), + PIC32_UART_MODE_UEN1); + pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), + PIC32_UART_MODE_UEN0); + pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), + PIC32_UART_MODE_RTSMD); + } + + /* Always 8-bit */ + new->c_cflag |= CS8; + + /* Mark/Space parity is not supported */ + new->c_cflag &= ~CMSPAR; + + /* update baud */ + baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16); + quot = uart_get_divisor(port, baud) - 1; + pic32_uart_writel(sport, PIC32_UART_BRG, quot); + uart_update_timeout(port, new->c_cflag, baud); + + if (tty_termios_baud_rate(new)) + tty_termios_encode_baud_rate(new, baud, baud); + + /* enable uart */ + pic32_uart_en_and_unmask(port); + + spin_unlock_irqrestore(&port->lock, flags); +} + +/* serial core request to claim uart iomem */ +static int pic32_uart_request_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + struct resource *res_mem; + + res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (unlikely(!res_mem)) + return -EINVAL; + + if (!request_mem_region(port->mapbase, resource_size(res_mem), + "pic32_uart_mem")) + return -EBUSY; + + port->membase = devm_ioremap(port->dev, port->mapbase, + resource_size(res_mem)); + if (!port->membase) { + dev_err(port->dev, "Unable to map registers\n"); + release_mem_region(port->mapbase, resource_size(res_mem)); + return -ENOMEM; + } + + return 0; +} + +/* serial core request to release uart iomem */ +static void pic32_uart_release_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + struct resource *res_mem; + unsigned int res_size; + + res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (unlikely(!res_mem)) + return; + res_size = resource_size(res_mem); + + release_mem_region(port->mapbase, res_size); +} + +/* serial core request to do any port required auto-configuration */ +static void pic32_uart_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + if (pic32_uart_request_port(port)) + return; + port->type = PORT_PIC32; + } +} + +/* serial core request to check that port information in serinfo are suitable */ +static int pic32_uart_verify_port(struct uart_port *port, + struct serial_struct *serinfo) +{ + if (port->type != PORT_PIC32) + return -EINVAL; + if (port->irq != serinfo->irq) + return -EINVAL; + if (port->iotype != serinfo->io_type) + return -EINVAL; + if (port->mapbase != (unsigned long)serinfo->iomem_base) + return -EINVAL; + + return 0; +} + +/* serial core callbacks */ +static const struct uart_ops pic32_uart_ops = { + .tx_empty = pic32_uart_tx_empty, + .get_mctrl = pic32_uart_get_mctrl, + .set_mctrl = pic32_uart_set_mctrl, + .start_tx = pic32_uart_start_tx, + .stop_tx = pic32_uart_stop_tx, + .stop_rx = pic32_uart_stop_rx, + .break_ctl = pic32_uart_break_ctl, + .startup = pic32_uart_startup, + .shutdown = pic32_uart_shutdown, + .set_termios = pic32_uart_set_termios, + .type = pic32_uart_type, + .release_port = pic32_uart_release_port, + .request_port = pic32_uart_request_port, + .config_port = pic32_uart_config_port, + .verify_port = pic32_uart_verify_port, +}; + +#ifdef CONFIG_SERIAL_PIC32_CONSOLE +/* output given char */ +static void pic32_console_putchar(struct uart_port *port, int ch) +{ + struct pic32_sport *sport = to_pic32_sport(port); + + if (!(pic32_uart_readl(sport, PIC32_UART_MODE) & PIC32_UART_MODE_ON)) + return; + + if (!(pic32_uart_readl(sport, PIC32_UART_STA) & PIC32_UART_STA_UTXEN)) + return; + + /* wait for tx empty */ + pic32_wait_deplete_txbuf(sport); + + pic32_uart_writel(sport, PIC32_UART_TX, ch & 0xff); +} + +/* console core request to output given string */ +static void pic32_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct pic32_sport *sport = pic32_sports[co->index]; + struct uart_port *port = pic32_get_port(sport); + + /* call uart helper to deal with \r\n */ + uart_console_write(port, s, count, pic32_console_putchar); +} + +/* console core request to setup given console, find matching uart + * port and setup it. + */ +static int pic32_console_setup(struct console *co, char *options) +{ + struct pic32_sport *sport; + struct uart_port *port = NULL; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + int ret = 0; + + if (unlikely(co->index < 0 || co->index >= PIC32_MAX_UARTS)) + return -ENODEV; + + sport = pic32_sports[co->index]; + if (!sport) + return -ENODEV; + port = pic32_get_port(sport); + + ret = pic32_enable_clock(sport); + if (ret) + return ret; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver pic32_uart_driver; +static struct console pic32_console = { + .name = PIC32_SDEV_NAME, + .write = pic32_console_write, + .device = uart_console_device, + .setup = pic32_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &pic32_uart_driver, +}; +#define PIC32_SCONSOLE (&pic32_console) + +static int __init pic32_console_init(void) +{ + register_console(&pic32_console); + return 0; +} +console_initcall(pic32_console_init); + +/* + * Late console initialization. + */ +static int __init pic32_late_console_init(void) +{ + if (!(pic32_console.flags & CON_ENABLED)) + register_console(&pic32_console); + + return 0; +} + +core_initcall(pic32_late_console_init); + +#else +#define PIC32_SCONSOLE NULL +#endif + +static struct uart_driver pic32_uart_driver = { + .owner = THIS_MODULE, + .driver_name = PIC32_DEV_NAME, + .dev_name = PIC32_SDEV_NAME, + .nr = PIC32_MAX_UARTS, + .cons = PIC32_SCONSOLE, +}; + +static int pic32_uart_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct pic32_sport *sport; + int uart_idx = 0; + struct resource *res_mem; + struct uart_port *port; + int ret; + + uart_idx = of_alias_get_id(np, "serial"); + if (uart_idx < 0 || uart_idx >= PIC32_MAX_UARTS) + return -EINVAL; + + res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res_mem) + return -EINVAL; + + sport = devm_kzalloc(&pdev->dev, sizeof(*sport), GFP_KERNEL); + if (!sport) + return -ENOMEM; + + sport->idx = uart_idx; + sport->irq_fault = irq_of_parse_and_map(np, 0); + sport->irqflags_fault = IRQF_NO_THREAD; + sport->irq_rx = irq_of_parse_and_map(np, 1); + sport->irqflags_rx = IRQF_NO_THREAD; + sport->irq_tx = irq_of_parse_and_map(np, 2); + sport->irqflags_tx = IRQF_NO_THREAD; + sport->clk = devm_clk_get(&pdev->dev, NULL); + sport->cts_gpio = -EINVAL; + sport->dev = &pdev->dev; + + /* Hardware flow control: gpios + * !Note: Basically, CTS is needed for reading the status. + */ + sport->hw_flow_ctrl = false; + sport->cts_gpio = of_get_named_gpio(np, "cts-gpios", 0); + if (gpio_is_valid(sport->cts_gpio)) { + sport->hw_flow_ctrl = true; + + ret = devm_gpio_request(sport->dev, + sport->cts_gpio, "CTS"); + if (ret) { + dev_err(&pdev->dev, + "error requesting CTS GPIO\n"); + goto err; + } + + ret = gpio_direction_input(sport->cts_gpio); + if (ret) { + dev_err(&pdev->dev, "error setting CTS GPIO\n"); + goto err; + } + } + + pic32_sports[uart_idx] = sport; + port = &sport->port; + memset(port, 0, sizeof(*port)); + port->iotype = UPIO_MEM; + port->mapbase = res_mem->start; + port->ops = &pic32_uart_ops; + port->flags = UPF_BOOT_AUTOCONF; + port->dev = &pdev->dev; + port->fifosize = PIC32_UART_TX_FIFO_DEPTH; + port->uartclk = clk_get_rate(sport->clk); + port->line = uart_idx; + + ret = uart_add_one_port(&pic32_uart_driver, port); + if (ret) { + port->membase = NULL; + dev_err(port->dev, "%s: uart add port error!\n", __func__); + goto err; + } + +#ifdef CONFIG_SERIAL_PIC32_CONSOLE + if (uart_console(port) && (pic32_console.flags & CON_ENABLED)) { + /* The peripheral clock has been enabled by console_setup, + * so disable it till the port is used. + */ + pic32_disable_clock(sport); + } +#endif + + platform_set_drvdata(pdev, port); + + dev_info(&pdev->dev, "%s: uart(%d) driver initialized.\n", + __func__, uart_idx); + + return 0; +err: + /* automatic unroll of sport and gpios */ + return ret; +} + +static int pic32_uart_remove(struct platform_device *pdev) +{ + struct uart_port *port = platform_get_drvdata(pdev); + struct pic32_sport *sport = to_pic32_sport(port); + + uart_remove_one_port(&pic32_uart_driver, port); + pic32_disable_clock(sport); + platform_set_drvdata(pdev, NULL); + pic32_sports[sport->idx] = NULL; + + /* automatic unroll of sport and gpios */ + return 0; +} + +static const struct of_device_id pic32_serial_dt_ids[] = { + { .compatible = "microchip,pic32mzda-uart" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, pic32_serial_dt_ids); + +static struct platform_driver pic32_uart_platform_driver = { + .probe = pic32_uart_probe, + .remove = pic32_uart_remove, + .driver = { + .name = PIC32_DEV_NAME, + .of_match_table = of_match_ptr(pic32_serial_dt_ids), + .suppress_bind_attrs = IS_BUILTIN(CONFIG_SERIAL_PIC32), + }, +}; + +static int __init pic32_uart_init(void) +{ + int ret; + + ret = uart_register_driver(&pic32_uart_driver); + if (ret) { + pr_err("failed to register %s:%d\n", + pic32_uart_driver.driver_name, ret); + return ret; + } + + ret = platform_driver_register(&pic32_uart_platform_driver); + if (ret) { + pr_err("fail to register pic32 uart\n"); + uart_unregister_driver(&pic32_uart_driver); + } + + return ret; +} +arch_initcall(pic32_uart_init); + +static void __exit pic32_uart_exit(void) +{ +#ifdef CONFIG_SERIAL_PIC32_CONSOLE + unregister_console(&pic32_console); +#endif + platform_driver_unregister(&pic32_uart_platform_driver); + uart_unregister_driver(&pic32_uart_driver); +} +module_exit(pic32_uart_exit); + +MODULE_AUTHOR("Sorin-Andrei Pistirica "); +MODULE_DESCRIPTION("Microchip PIC32 integrated serial port driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/pic32_uart.h b/drivers/tty/serial/pic32_uart.h new file mode 100644 index 000000000..b15639cc3 --- /dev/null +++ b/drivers/tty/serial/pic32_uart.h @@ -0,0 +1,125 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * PIC32 Integrated Serial Driver. + * + * Copyright (C) 2015 Microchip Technology, Inc. + * + * Authors: + * Sorin-Andrei Pistirica + */ +#ifndef __DT_PIC32_UART_H__ +#define __DT_PIC32_UART_H__ + +#define PIC32_UART_DFLT_BRATE (9600) +#define PIC32_UART_TX_FIFO_DEPTH (8) +#define PIC32_UART_RX_FIFO_DEPTH (8) + +#define PIC32_UART_MODE 0x00 +#define PIC32_UART_STA 0x10 +#define PIC32_UART_TX 0x20 +#define PIC32_UART_RX 0x30 +#define PIC32_UART_BRG 0x40 + +struct pic32_console_opt { + int baud; + int parity; + int bits; + int flow; +}; + +/* struct pic32_sport - pic32 serial port descriptor + * @port: uart port descriptor + * @idx: port index + * @irq_fault: virtual fault interrupt number + * @irqflags_fault: flags related to fault irq + * @irq_fault_name: irq fault name + * @irq_rx: virtual rx interrupt number + * @irqflags_rx: flags related to rx irq + * @irq_rx_name: irq rx name + * @irq_tx: virtual tx interrupt number + * @irqflags_tx: : flags related to tx irq + * @irq_tx_name: irq tx name + * @cts_gpio: clear to send gpio + * @dev: device descriptor + **/ +struct pic32_sport { + struct uart_port port; + struct pic32_console_opt opt; + int idx; + + int irq_fault; + int irqflags_fault; + const char *irq_fault_name; + int irq_rx; + int irqflags_rx; + const char *irq_rx_name; + int irq_tx; + int irqflags_tx; + const char *irq_tx_name; + u8 enable_tx_irq; + + bool hw_flow_ctrl; + int cts_gpio; + + int ref_clk; + struct clk *clk; + + struct device *dev; +}; +#define to_pic32_sport(c) container_of(c, struct pic32_sport, port) +#define pic32_get_port(sport) (&sport->port) +#define pic32_get_opt(sport) (&sport->opt) +#define tx_irq_enabled(sport) (sport->enable_tx_irq) + +static inline void pic32_uart_writel(struct pic32_sport *sport, + u32 reg, u32 val) +{ + struct uart_port *port = pic32_get_port(sport); + + __raw_writel(val, port->membase + reg); +} + +static inline u32 pic32_uart_readl(struct pic32_sport *sport, u32 reg) +{ + struct uart_port *port = pic32_get_port(sport); + + return __raw_readl(port->membase + reg); +} + +/* pic32 uart mode register bits */ +#define PIC32_UART_MODE_ON BIT(15) +#define PIC32_UART_MODE_FRZ BIT(14) +#define PIC32_UART_MODE_SIDL BIT(13) +#define PIC32_UART_MODE_IREN BIT(12) +#define PIC32_UART_MODE_RTSMD BIT(11) +#define PIC32_UART_MODE_RESV1 BIT(10) +#define PIC32_UART_MODE_UEN1 BIT(9) +#define PIC32_UART_MODE_UEN0 BIT(8) +#define PIC32_UART_MODE_WAKE BIT(7) +#define PIC32_UART_MODE_LPBK BIT(6) +#define PIC32_UART_MODE_ABAUD BIT(5) +#define PIC32_UART_MODE_RXINV BIT(4) +#define PIC32_UART_MODE_BRGH BIT(3) +#define PIC32_UART_MODE_PDSEL1 BIT(2) +#define PIC32_UART_MODE_PDSEL0 BIT(1) +#define PIC32_UART_MODE_STSEL BIT(0) + +/* pic32 uart status register bits */ +#define PIC32_UART_STA_UTXISEL1 BIT(15) +#define PIC32_UART_STA_UTXISEL0 BIT(14) +#define PIC32_UART_STA_UTXINV BIT(13) +#define PIC32_UART_STA_URXEN BIT(12) +#define PIC32_UART_STA_UTXBRK BIT(11) +#define PIC32_UART_STA_UTXEN BIT(10) +#define PIC32_UART_STA_UTXBF BIT(9) +#define PIC32_UART_STA_TRMT BIT(8) +#define PIC32_UART_STA_URXISEL1 BIT(7) +#define PIC32_UART_STA_URXISEL0 BIT(6) +#define PIC32_UART_STA_ADDEN BIT(5) +#define PIC32_UART_STA_RIDLE BIT(4) +#define PIC32_UART_STA_PERR BIT(3) +#define PIC32_UART_STA_FERR BIT(2) +#define PIC32_UART_STA_OERR BIT(1) +#define PIC32_UART_STA_URXDA BIT(0) + +#endif /* __DT_PIC32_UART_H__ */ diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c new file mode 100644 index 000000000..d6aef8a1f --- /dev/null +++ b/drivers/tty/serial/pmac_zilog.c @@ -0,0 +1,2058 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver for PowerMac Z85c30 based ESCC cell found in the + * "macio" ASICs of various PowerMac models + * + * Copyright (C) 2003 Ben. Herrenschmidt (benh@kernel.crashing.org) + * + * Derived from drivers/macintosh/macserial.c by Paul Mackerras + * and drivers/serial/sunzilog.c by David S. Miller + * + * Hrm... actually, I ripped most of sunzilog (Thanks David !) and + * adapted special tweaks needed for us. I don't think it's worth + * merging back those though. The DMA code still has to get in + * and once done, I expect that driver to remain fairly stable in + * the long term, unless we change the driver model again... + * + * 2004-08-06 Harald Welte + * - Enable BREAK interrupt + * - Add support for sysreq + * + * TODO: - Add DMA support + * - Defer port shutdown to a few seconds after close + * - maybe put something right into uap->clk_divisor + */ + +#undef DEBUG +#undef DEBUG_HARD +#undef USE_CTRL_O_SYSRQ + +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_PPC_PMAC +#include +#include +#include +#include +#include +#else +#include +#define of_machine_is_compatible(x) (0) +#endif + +#include +#include + +#include "pmac_zilog.h" + +/* Not yet implemented */ +#undef HAS_DBDMA + +static char version[] __initdata = "pmac_zilog: 0.6 (Benjamin Herrenschmidt )"; +MODULE_AUTHOR("Benjamin Herrenschmidt "); +MODULE_DESCRIPTION("Driver for the Mac and PowerMac serial ports."); +MODULE_LICENSE("GPL"); + +#ifdef CONFIG_SERIAL_PMACZILOG_TTYS +#define PMACZILOG_MAJOR TTY_MAJOR +#define PMACZILOG_MINOR 64 +#define PMACZILOG_NAME "ttyS" +#else +#define PMACZILOG_MAJOR 204 +#define PMACZILOG_MINOR 192 +#define PMACZILOG_NAME "ttyPZ" +#endif + +#define pmz_debug(fmt, arg...) pr_debug("ttyPZ%d: " fmt, uap->port.line, ## arg) +#define pmz_error(fmt, arg...) pr_err("ttyPZ%d: " fmt, uap->port.line, ## arg) +#define pmz_info(fmt, arg...) pr_info("ttyPZ%d: " fmt, uap->port.line, ## arg) + +/* + * For the sake of early serial console, we can do a pre-probe + * (optional) of the ports at rather early boot time. + */ +static struct uart_pmac_port pmz_ports[MAX_ZS_PORTS]; +static int pmz_ports_count; + +static struct uart_driver pmz_uart_reg = { + .owner = THIS_MODULE, + .driver_name = PMACZILOG_NAME, + .dev_name = PMACZILOG_NAME, + .major = PMACZILOG_MAJOR, + .minor = PMACZILOG_MINOR, +}; + + +/* + * Load all registers to reprogram the port + * This function must only be called when the TX is not busy. The UART + * port lock must be held and local interrupts disabled. + */ +static void pmz_load_zsregs(struct uart_pmac_port *uap, u8 *regs) +{ + int i; + + /* Let pending transmits finish. */ + for (i = 0; i < 1000; i++) { + unsigned char stat = read_zsreg(uap, R1); + if (stat & ALL_SNT) + break; + udelay(100); + } + + ZS_CLEARERR(uap); + zssync(uap); + ZS_CLEARFIFO(uap); + zssync(uap); + ZS_CLEARERR(uap); + + /* Disable all interrupts. */ + write_zsreg(uap, R1, + regs[R1] & ~(RxINT_MASK | TxINT_ENAB | EXT_INT_ENAB)); + + /* Set parity, sync config, stop bits, and clock divisor. */ + write_zsreg(uap, R4, regs[R4]); + + /* Set misc. TX/RX control bits. */ + write_zsreg(uap, R10, regs[R10]); + + /* Set TX/RX controls sans the enable bits. */ + write_zsreg(uap, R3, regs[R3] & ~RxENABLE); + write_zsreg(uap, R5, regs[R5] & ~TxENABLE); + + /* now set R7 "prime" on ESCC */ + write_zsreg(uap, R15, regs[R15] | EN85C30); + write_zsreg(uap, R7, regs[R7P]); + + /* make sure we use R7 "non-prime" on ESCC */ + write_zsreg(uap, R15, regs[R15] & ~EN85C30); + + /* Synchronous mode config. */ + write_zsreg(uap, R6, regs[R6]); + write_zsreg(uap, R7, regs[R7]); + + /* Disable baud generator. */ + write_zsreg(uap, R14, regs[R14] & ~BRENAB); + + /* Clock mode control. */ + write_zsreg(uap, R11, regs[R11]); + + /* Lower and upper byte of baud rate generator divisor. */ + write_zsreg(uap, R12, regs[R12]); + write_zsreg(uap, R13, regs[R13]); + + /* Now rewrite R14, with BRENAB (if set). */ + write_zsreg(uap, R14, regs[R14]); + + /* Reset external status interrupts. */ + write_zsreg(uap, R0, RES_EXT_INT); + write_zsreg(uap, R0, RES_EXT_INT); + + /* Rewrite R3/R5, this time without enables masked. */ + write_zsreg(uap, R3, regs[R3]); + write_zsreg(uap, R5, regs[R5]); + + /* Rewrite R1, this time without IRQ enabled masked. */ + write_zsreg(uap, R1, regs[R1]); + + /* Enable interrupts */ + write_zsreg(uap, R9, regs[R9]); +} + +/* + * We do like sunzilog to avoid disrupting pending Tx + * Reprogram the Zilog channel HW registers with the copies found in the + * software state struct. If the transmitter is busy, we defer this update + * until the next TX complete interrupt. Else, we do it right now. + * + * The UART port lock must be held and local interrupts disabled. + */ +static void pmz_maybe_update_regs(struct uart_pmac_port *uap) +{ + if (!ZS_REGS_HELD(uap)) { + if (ZS_TX_ACTIVE(uap)) { + uap->flags |= PMACZILOG_FLAG_REGS_HELD; + } else { + pmz_debug("pmz: maybe_update_regs: updating\n"); + pmz_load_zsregs(uap, uap->curregs); + } + } +} + +static void pmz_interrupt_control(struct uart_pmac_port *uap, int enable) +{ + if (enable) { + uap->curregs[1] |= INT_ALL_Rx | TxINT_ENAB; + if (!ZS_IS_EXTCLK(uap)) + uap->curregs[1] |= EXT_INT_ENAB; + } else { + uap->curregs[1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK); + } + write_zsreg(uap, R1, uap->curregs[1]); +} + +static bool pmz_receive_chars(struct uart_pmac_port *uap) + __must_hold(&uap->port.lock) +{ + struct tty_port *port; + unsigned char ch, r1, drop, flag; + int loops = 0; + + /* Sanity check, make sure the old bug is no longer happening */ + if (uap->port.state == NULL) { + WARN_ON(1); + (void)read_zsdata(uap); + return false; + } + port = &uap->port.state->port; + + while (1) { + drop = 0; + + r1 = read_zsreg(uap, R1); + ch = read_zsdata(uap); + + if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) { + write_zsreg(uap, R0, ERR_RES); + zssync(uap); + } + + ch &= uap->parity_mask; + if (ch == 0 && uap->flags & PMACZILOG_FLAG_BREAK) { + uap->flags &= ~PMACZILOG_FLAG_BREAK; + } + +#if defined(CONFIG_MAGIC_SYSRQ) && defined(CONFIG_SERIAL_CORE_CONSOLE) +#ifdef USE_CTRL_O_SYSRQ + /* Handle the SysRq ^O Hack */ + if (ch == '\x0f') { + uap->port.sysrq = jiffies + HZ*5; + goto next_char; + } +#endif /* USE_CTRL_O_SYSRQ */ + if (uap->port.sysrq) { + int swallow; + spin_unlock(&uap->port.lock); + swallow = uart_handle_sysrq_char(&uap->port, ch); + spin_lock(&uap->port.lock); + if (swallow) + goto next_char; + } +#endif /* CONFIG_MAGIC_SYSRQ && CONFIG_SERIAL_CORE_CONSOLE */ + + /* A real serial line, record the character and status. */ + if (drop) + goto next_char; + + flag = TTY_NORMAL; + uap->port.icount.rx++; + + if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR | BRK_ABRT)) { + if (r1 & BRK_ABRT) { + pmz_debug("pmz: got break !\n"); + r1 &= ~(PAR_ERR | CRC_ERR); + uap->port.icount.brk++; + if (uart_handle_break(&uap->port)) + goto next_char; + } + else if (r1 & PAR_ERR) + uap->port.icount.parity++; + else if (r1 & CRC_ERR) + uap->port.icount.frame++; + if (r1 & Rx_OVR) + uap->port.icount.overrun++; + r1 &= uap->port.read_status_mask; + if (r1 & BRK_ABRT) + flag = TTY_BREAK; + else if (r1 & PAR_ERR) + flag = TTY_PARITY; + else if (r1 & CRC_ERR) + flag = TTY_FRAME; + } + + if (uap->port.ignore_status_mask == 0xff || + (r1 & uap->port.ignore_status_mask) == 0) { + tty_insert_flip_char(port, ch, flag); + } + if (r1 & Rx_OVR) + tty_insert_flip_char(port, 0, TTY_OVERRUN); + next_char: + /* We can get stuck in an infinite loop getting char 0 when the + * line is in a wrong HW state, we break that here. + * When that happens, I disable the receive side of the driver. + * Note that what I've been experiencing is a real irq loop where + * I'm getting flooded regardless of the actual port speed. + * Something strange is going on with the HW + */ + if ((++loops) > 1000) + goto flood; + ch = read_zsreg(uap, R0); + if (!(ch & Rx_CH_AV)) + break; + } + + return true; + flood: + pmz_interrupt_control(uap, 0); + pmz_error("pmz: rx irq flood !\n"); + return true; +} + +static void pmz_status_handle(struct uart_pmac_port *uap) +{ + unsigned char status; + + status = read_zsreg(uap, R0); + write_zsreg(uap, R0, RES_EXT_INT); + zssync(uap); + + if (ZS_IS_OPEN(uap) && ZS_WANTS_MODEM_STATUS(uap)) { + if (status & SYNC_HUNT) + uap->port.icount.dsr++; + + /* The Zilog just gives us an interrupt when DCD/CTS/etc. change. + * But it does not tell us which bit has changed, we have to keep + * track of this ourselves. + * The CTS input is inverted for some reason. -- paulus + */ + if ((status ^ uap->prev_status) & DCD) + uart_handle_dcd_change(&uap->port, + (status & DCD)); + if ((status ^ uap->prev_status) & CTS) + uart_handle_cts_change(&uap->port, + !(status & CTS)); + + wake_up_interruptible(&uap->port.state->port.delta_msr_wait); + } + + if (status & BRK_ABRT) + uap->flags |= PMACZILOG_FLAG_BREAK; + + uap->prev_status = status; +} + +static void pmz_transmit_chars(struct uart_pmac_port *uap) +{ + struct circ_buf *xmit; + + if (ZS_IS_CONS(uap)) { + unsigned char status = read_zsreg(uap, R0); + + /* TX still busy? Just wait for the next TX done interrupt. + * + * It can occur because of how we do serial console writes. It would + * be nice to transmit console writes just like we normally would for + * a TTY line. (ie. buffered and TX interrupt driven). That is not + * easy because console writes cannot sleep. One solution might be + * to poll on enough port->xmit space becoming free. -DaveM + */ + if (!(status & Tx_BUF_EMP)) + return; + } + + uap->flags &= ~PMACZILOG_FLAG_TX_ACTIVE; + + if (ZS_REGS_HELD(uap)) { + pmz_load_zsregs(uap, uap->curregs); + uap->flags &= ~PMACZILOG_FLAG_REGS_HELD; + } + + if (ZS_TX_STOPPED(uap)) { + uap->flags &= ~PMACZILOG_FLAG_TX_STOPPED; + goto ack_tx_int; + } + + /* Under some circumstances, we see interrupts reported for + * a closed channel. The interrupt mask in R1 is clear, but + * R3 still signals the interrupts and we see them when taking + * an interrupt for the other channel (this could be a qemu + * bug but since the ESCC doc doesn't specify precsiely whether + * R3 interrup status bits are masked by R1 interrupt enable + * bits, better safe than sorry). --BenH. + */ + if (!ZS_IS_OPEN(uap)) + goto ack_tx_int; + + if (uap->port.x_char) { + uap->flags |= PMACZILOG_FLAG_TX_ACTIVE; + write_zsdata(uap, uap->port.x_char); + zssync(uap); + uap->port.icount.tx++; + uap->port.x_char = 0; + return; + } + + if (uap->port.state == NULL) + goto ack_tx_int; + xmit = &uap->port.state->xmit; + if (uart_circ_empty(xmit)) { + uart_write_wakeup(&uap->port); + goto ack_tx_int; + } + if (uart_tx_stopped(&uap->port)) + goto ack_tx_int; + + uap->flags |= PMACZILOG_FLAG_TX_ACTIVE; + write_zsdata(uap, xmit->buf[xmit->tail]); + zssync(uap); + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + uap->port.icount.tx++; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&uap->port); + + return; + +ack_tx_int: + write_zsreg(uap, R0, RES_Tx_P); + zssync(uap); +} + +/* Hrm... we register that twice, fixme later.... */ +static irqreturn_t pmz_interrupt(int irq, void *dev_id) +{ + struct uart_pmac_port *uap = dev_id; + struct uart_pmac_port *uap_a; + struct uart_pmac_port *uap_b; + int rc = IRQ_NONE; + bool push; + u8 r3; + + uap_a = pmz_get_port_A(uap); + uap_b = uap_a->mate; + + spin_lock(&uap_a->port.lock); + r3 = read_zsreg(uap_a, R3); + +#ifdef DEBUG_HARD + pmz_debug("irq, r3: %x\n", r3); +#endif + /* Channel A */ + push = false; + if (r3 & (CHAEXT | CHATxIP | CHARxIP)) { + if (!ZS_IS_OPEN(uap_a)) { + pmz_debug("ChanA interrupt while not open !\n"); + goto skip_a; + } + write_zsreg(uap_a, R0, RES_H_IUS); + zssync(uap_a); + if (r3 & CHAEXT) + pmz_status_handle(uap_a); + if (r3 & CHARxIP) + push = pmz_receive_chars(uap_a); + if (r3 & CHATxIP) + pmz_transmit_chars(uap_a); + rc = IRQ_HANDLED; + } + skip_a: + spin_unlock(&uap_a->port.lock); + if (push) + tty_flip_buffer_push(&uap->port.state->port); + + if (!uap_b) + goto out; + + spin_lock(&uap_b->port.lock); + push = false; + if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) { + if (!ZS_IS_OPEN(uap_b)) { + pmz_debug("ChanB interrupt while not open !\n"); + goto skip_b; + } + write_zsreg(uap_b, R0, RES_H_IUS); + zssync(uap_b); + if (r3 & CHBEXT) + pmz_status_handle(uap_b); + if (r3 & CHBRxIP) + push = pmz_receive_chars(uap_b); + if (r3 & CHBTxIP) + pmz_transmit_chars(uap_b); + rc = IRQ_HANDLED; + } + skip_b: + spin_unlock(&uap_b->port.lock); + if (push) + tty_flip_buffer_push(&uap->port.state->port); + + out: + return rc; +} + +/* + * Peek the status register, lock not held by caller + */ +static inline u8 pmz_peek_status(struct uart_pmac_port *uap) +{ + unsigned long flags; + u8 status; + + spin_lock_irqsave(&uap->port.lock, flags); + status = read_zsreg(uap, R0); + spin_unlock_irqrestore(&uap->port.lock, flags); + + return status; +} + +/* + * Check if transmitter is empty + * The port lock is not held. + */ +static unsigned int pmz_tx_empty(struct uart_port *port) +{ + unsigned char status; + + status = pmz_peek_status(to_pmz(port)); + if (status & Tx_BUF_EMP) + return TIOCSER_TEMT; + return 0; +} + +/* + * Set Modem Control (RTS & DTR) bits + * The port lock is held and interrupts are disabled. + * Note: Shall we really filter out RTS on external ports or + * should that be dealt at higher level only ? + */ +static void pmz_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_pmac_port *uap = to_pmz(port); + unsigned char set_bits, clear_bits; + + /* Do nothing for irda for now... */ + if (ZS_IS_IRDA(uap)) + return; + /* We get called during boot with a port not up yet */ + if (!(ZS_IS_OPEN(uap) || ZS_IS_CONS(uap))) + return; + + set_bits = clear_bits = 0; + + if (ZS_IS_INTMODEM(uap)) { + if (mctrl & TIOCM_RTS) + set_bits |= RTS; + else + clear_bits |= RTS; + } + if (mctrl & TIOCM_DTR) + set_bits |= DTR; + else + clear_bits |= DTR; + + /* NOTE: Not subject to 'transmitter active' rule. */ + uap->curregs[R5] |= set_bits; + uap->curregs[R5] &= ~clear_bits; + + write_zsreg(uap, R5, uap->curregs[R5]); + pmz_debug("pmz_set_mctrl: set bits: %x, clear bits: %x -> %x\n", + set_bits, clear_bits, uap->curregs[R5]); + zssync(uap); +} + +/* + * Get Modem Control bits (only the input ones, the core will + * or that with a cached value of the control ones) + * The port lock is held and interrupts are disabled. + */ +static unsigned int pmz_get_mctrl(struct uart_port *port) +{ + struct uart_pmac_port *uap = to_pmz(port); + unsigned char status; + unsigned int ret; + + status = read_zsreg(uap, R0); + + ret = 0; + if (status & DCD) + ret |= TIOCM_CAR; + if (status & SYNC_HUNT) + ret |= TIOCM_DSR; + if (!(status & CTS)) + ret |= TIOCM_CTS; + + return ret; +} + +/* + * Stop TX side. Dealt like sunzilog at next Tx interrupt, + * though for DMA, we will have to do a bit more. + * The port lock is held and interrupts are disabled. + */ +static void pmz_stop_tx(struct uart_port *port) +{ + to_pmz(port)->flags |= PMACZILOG_FLAG_TX_STOPPED; +} + +/* + * Kick the Tx side. + * The port lock is held and interrupts are disabled. + */ +static void pmz_start_tx(struct uart_port *port) +{ + struct uart_pmac_port *uap = to_pmz(port); + unsigned char status; + + pmz_debug("pmz: start_tx()\n"); + + uap->flags |= PMACZILOG_FLAG_TX_ACTIVE; + uap->flags &= ~PMACZILOG_FLAG_TX_STOPPED; + + status = read_zsreg(uap, R0); + + /* TX busy? Just wait for the TX done interrupt. */ + if (!(status & Tx_BUF_EMP)) + return; + + /* Send the first character to jump-start the TX done + * IRQ sending engine. + */ + if (port->x_char) { + write_zsdata(uap, port->x_char); + zssync(uap); + port->icount.tx++; + port->x_char = 0; + } else { + struct circ_buf *xmit = &port->state->xmit; + + if (uart_circ_empty(xmit)) + goto out; + write_zsdata(uap, xmit->buf[xmit->tail]); + zssync(uap); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&uap->port); + } + out: + pmz_debug("pmz: start_tx() done.\n"); +} + +/* + * Stop Rx side, basically disable emitting of + * Rx interrupts on the port. We don't disable the rx + * side of the chip proper though + * The port lock is held. + */ +static void pmz_stop_rx(struct uart_port *port) +{ + struct uart_pmac_port *uap = to_pmz(port); + + pmz_debug("pmz: stop_rx()()\n"); + + /* Disable all RX interrupts. */ + uap->curregs[R1] &= ~RxINT_MASK; + pmz_maybe_update_regs(uap); + + pmz_debug("pmz: stop_rx() done.\n"); +} + +/* + * Enable modem status change interrupts + * The port lock is held. + */ +static void pmz_enable_ms(struct uart_port *port) +{ + struct uart_pmac_port *uap = to_pmz(port); + unsigned char new_reg; + + if (ZS_IS_IRDA(uap)) + return; + new_reg = uap->curregs[R15] | (DCDIE | SYNCIE | CTSIE); + if (new_reg != uap->curregs[R15]) { + uap->curregs[R15] = new_reg; + + /* NOTE: Not subject to 'transmitter active' rule. */ + write_zsreg(uap, R15, uap->curregs[R15]); + } +} + +/* + * Control break state emission + * The port lock is not held. + */ +static void pmz_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_pmac_port *uap = to_pmz(port); + unsigned char set_bits, clear_bits, new_reg; + unsigned long flags; + + set_bits = clear_bits = 0; + + if (break_state) + set_bits |= SND_BRK; + else + clear_bits |= SND_BRK; + + spin_lock_irqsave(&port->lock, flags); + + new_reg = (uap->curregs[R5] | set_bits) & ~clear_bits; + if (new_reg != uap->curregs[R5]) { + uap->curregs[R5] = new_reg; + write_zsreg(uap, R5, uap->curregs[R5]); + } + + spin_unlock_irqrestore(&port->lock, flags); +} + +#ifdef CONFIG_PPC_PMAC + +/* + * Turn power on or off to the SCC and associated stuff + * (port drivers, modem, IR port, etc.) + * Returns the number of milliseconds we should wait before + * trying to use the port. + */ +static int pmz_set_scc_power(struct uart_pmac_port *uap, int state) +{ + int delay = 0; + int rc; + + if (state) { + rc = pmac_call_feature( + PMAC_FTR_SCC_ENABLE, uap->node, uap->port_type, 1); + pmz_debug("port power on result: %d\n", rc); + if (ZS_IS_INTMODEM(uap)) { + rc = pmac_call_feature( + PMAC_FTR_MODEM_ENABLE, uap->node, 0, 1); + delay = 2500; /* wait for 2.5s before using */ + pmz_debug("modem power result: %d\n", rc); + } + } else { + /* TODO: Make that depend on a timer, don't power down + * immediately + */ + if (ZS_IS_INTMODEM(uap)) { + rc = pmac_call_feature( + PMAC_FTR_MODEM_ENABLE, uap->node, 0, 0); + pmz_debug("port power off result: %d\n", rc); + } + pmac_call_feature(PMAC_FTR_SCC_ENABLE, uap->node, uap->port_type, 0); + } + return delay; +} + +#else + +static int pmz_set_scc_power(struct uart_pmac_port *uap, int state) +{ + return 0; +} + +#endif /* !CONFIG_PPC_PMAC */ + +/* + * FixZeroBug....Works around a bug in the SCC receiving channel. + * Inspired from Darwin code, 15 Sept. 2000 -DanM + * + * The following sequence prevents a problem that is seen with O'Hare ASICs + * (most versions -- also with some Heathrow and Hydra ASICs) where a zero + * at the input to the receiver becomes 'stuck' and locks up the receiver. + * This problem can occur as a result of a zero bit at the receiver input + * coincident with any of the following events: + * + * The SCC is initialized (hardware or software). + * A framing error is detected. + * The clocking option changes from synchronous or X1 asynchronous + * clocking to X16, X32, or X64 asynchronous clocking. + * The decoding mode is changed among NRZ, NRZI, FM0, or FM1. + * + * This workaround attempts to recover from the lockup condition by placing + * the SCC in synchronous loopback mode with a fast clock before programming + * any of the asynchronous modes. + */ +static void pmz_fix_zero_bug_scc(struct uart_pmac_port *uap) +{ + write_zsreg(uap, 9, ZS_IS_CHANNEL_A(uap) ? CHRA : CHRB); + zssync(uap); + udelay(10); + write_zsreg(uap, 9, (ZS_IS_CHANNEL_A(uap) ? CHRA : CHRB) | NV); + zssync(uap); + + write_zsreg(uap, 4, X1CLK | MONSYNC); + write_zsreg(uap, 3, Rx8); + write_zsreg(uap, 5, Tx8 | RTS); + write_zsreg(uap, 9, NV); /* Didn't we already do this? */ + write_zsreg(uap, 11, RCBR | TCBR); + write_zsreg(uap, 12, 0); + write_zsreg(uap, 13, 0); + write_zsreg(uap, 14, (LOOPBAK | BRSRC)); + write_zsreg(uap, 14, (LOOPBAK | BRSRC | BRENAB)); + write_zsreg(uap, 3, Rx8 | RxENABLE); + write_zsreg(uap, 0, RES_EXT_INT); + write_zsreg(uap, 0, RES_EXT_INT); + write_zsreg(uap, 0, RES_EXT_INT); /* to kill some time */ + + /* The channel should be OK now, but it is probably receiving + * loopback garbage. + * Switch to asynchronous mode, disable the receiver, + * and discard everything in the receive buffer. + */ + write_zsreg(uap, 9, NV); + write_zsreg(uap, 4, X16CLK | SB_MASK); + write_zsreg(uap, 3, Rx8); + + while (read_zsreg(uap, 0) & Rx_CH_AV) { + (void)read_zsreg(uap, 8); + write_zsreg(uap, 0, RES_EXT_INT); + write_zsreg(uap, 0, ERR_RES); + } +} + +/* + * Real startup routine, powers up the hardware and sets up + * the SCC. Returns a delay in ms where you need to wait before + * actually using the port, this is typically the internal modem + * powerup delay. This routine expect the lock to be taken. + */ +static int __pmz_startup(struct uart_pmac_port *uap) +{ + int pwr_delay = 0; + + memset(&uap->curregs, 0, sizeof(uap->curregs)); + + /* Power up the SCC & underlying hardware (modem/irda) */ + pwr_delay = pmz_set_scc_power(uap, 1); + + /* Nice buggy HW ... */ + pmz_fix_zero_bug_scc(uap); + + /* Reset the channel */ + uap->curregs[R9] = 0; + write_zsreg(uap, 9, ZS_IS_CHANNEL_A(uap) ? CHRA : CHRB); + zssync(uap); + udelay(10); + write_zsreg(uap, 9, 0); + zssync(uap); + + /* Clear the interrupt registers */ + write_zsreg(uap, R1, 0); + write_zsreg(uap, R0, ERR_RES); + write_zsreg(uap, R0, ERR_RES); + write_zsreg(uap, R0, RES_H_IUS); + write_zsreg(uap, R0, RES_H_IUS); + + /* Setup some valid baud rate */ + uap->curregs[R4] = X16CLK | SB1; + uap->curregs[R3] = Rx8; + uap->curregs[R5] = Tx8 | RTS; + if (!ZS_IS_IRDA(uap)) + uap->curregs[R5] |= DTR; + uap->curregs[R12] = 0; + uap->curregs[R13] = 0; + uap->curregs[R14] = BRENAB; + + /* Clear handshaking, enable BREAK interrupts */ + uap->curregs[R15] = BRKIE; + + /* Master interrupt enable */ + uap->curregs[R9] |= NV | MIE; + + pmz_load_zsregs(uap, uap->curregs); + + /* Enable receiver and transmitter. */ + write_zsreg(uap, R3, uap->curregs[R3] |= RxENABLE); + write_zsreg(uap, R5, uap->curregs[R5] |= TxENABLE); + + /* Remember status for DCD/CTS changes */ + uap->prev_status = read_zsreg(uap, R0); + + return pwr_delay; +} + +static void pmz_irda_reset(struct uart_pmac_port *uap) +{ + unsigned long flags; + + spin_lock_irqsave(&uap->port.lock, flags); + uap->curregs[R5] |= DTR; + write_zsreg(uap, R5, uap->curregs[R5]); + zssync(uap); + spin_unlock_irqrestore(&uap->port.lock, flags); + msleep(110); + + spin_lock_irqsave(&uap->port.lock, flags); + uap->curregs[R5] &= ~DTR; + write_zsreg(uap, R5, uap->curregs[R5]); + zssync(uap); + spin_unlock_irqrestore(&uap->port.lock, flags); + msleep(10); +} + +/* + * This is the "normal" startup routine, using the above one + * wrapped with the lock and doing a schedule delay + */ +static int pmz_startup(struct uart_port *port) +{ + struct uart_pmac_port *uap = to_pmz(port); + unsigned long flags; + int pwr_delay = 0; + + pmz_debug("pmz: startup()\n"); + + uap->flags |= PMACZILOG_FLAG_IS_OPEN; + + /* A console is never powered down. Else, power up and + * initialize the chip + */ + if (!ZS_IS_CONS(uap)) { + spin_lock_irqsave(&port->lock, flags); + pwr_delay = __pmz_startup(uap); + spin_unlock_irqrestore(&port->lock, flags); + } + sprintf(uap->irq_name, PMACZILOG_NAME"%d", uap->port.line); + if (request_irq(uap->port.irq, pmz_interrupt, IRQF_SHARED, + uap->irq_name, uap)) { + pmz_error("Unable to register zs interrupt handler.\n"); + pmz_set_scc_power(uap, 0); + return -ENXIO; + } + + /* Right now, we deal with delay by blocking here, I'll be + * smarter later on + */ + if (pwr_delay != 0) { + pmz_debug("pmz: delaying %d ms\n", pwr_delay); + msleep(pwr_delay); + } + + /* IrDA reset is done now */ + if (ZS_IS_IRDA(uap)) + pmz_irda_reset(uap); + + /* Enable interrupt requests for the channel */ + spin_lock_irqsave(&port->lock, flags); + pmz_interrupt_control(uap, 1); + spin_unlock_irqrestore(&port->lock, flags); + + pmz_debug("pmz: startup() done.\n"); + + return 0; +} + +static void pmz_shutdown(struct uart_port *port) +{ + struct uart_pmac_port *uap = to_pmz(port); + unsigned long flags; + + pmz_debug("pmz: shutdown()\n"); + + spin_lock_irqsave(&port->lock, flags); + + /* Disable interrupt requests for the channel */ + pmz_interrupt_control(uap, 0); + + if (!ZS_IS_CONS(uap)) { + /* Disable receiver and transmitter */ + uap->curregs[R3] &= ~RxENABLE; + uap->curregs[R5] &= ~TxENABLE; + + /* Disable break assertion */ + uap->curregs[R5] &= ~SND_BRK; + pmz_maybe_update_regs(uap); + } + + spin_unlock_irqrestore(&port->lock, flags); + + /* Release interrupt handler */ + free_irq(uap->port.irq, uap); + + spin_lock_irqsave(&port->lock, flags); + + uap->flags &= ~PMACZILOG_FLAG_IS_OPEN; + + if (!ZS_IS_CONS(uap)) + pmz_set_scc_power(uap, 0); /* Shut the chip down */ + + spin_unlock_irqrestore(&port->lock, flags); + + pmz_debug("pmz: shutdown() done.\n"); +} + +/* Shared by TTY driver and serial console setup. The port lock is held + * and local interrupts are disabled. + */ +static void pmz_convert_to_zs(struct uart_pmac_port *uap, unsigned int cflag, + unsigned int iflag, unsigned long baud) +{ + int brg; + + /* Switch to external clocking for IrDA high clock rates. That + * code could be re-used for Midi interfaces with different + * multipliers + */ + if (baud >= 115200 && ZS_IS_IRDA(uap)) { + uap->curregs[R4] = X1CLK; + uap->curregs[R11] = RCTRxCP | TCTRxCP; + uap->curregs[R14] = 0; /* BRG off */ + uap->curregs[R12] = 0; + uap->curregs[R13] = 0; + uap->flags |= PMACZILOG_FLAG_IS_EXTCLK; + } else { + switch (baud) { + case ZS_CLOCK/16: /* 230400 */ + uap->curregs[R4] = X16CLK; + uap->curregs[R11] = 0; + uap->curregs[R14] = 0; + break; + case ZS_CLOCK/32: /* 115200 */ + uap->curregs[R4] = X32CLK; + uap->curregs[R11] = 0; + uap->curregs[R14] = 0; + break; + default: + uap->curregs[R4] = X16CLK; + uap->curregs[R11] = TCBR | RCBR; + brg = BPS_TO_BRG(baud, ZS_CLOCK / 16); + uap->curregs[R12] = (brg & 255); + uap->curregs[R13] = ((brg >> 8) & 255); + uap->curregs[R14] = BRENAB; + } + uap->flags &= ~PMACZILOG_FLAG_IS_EXTCLK; + } + + /* Character size, stop bits, and parity. */ + uap->curregs[3] &= ~RxN_MASK; + uap->curregs[5] &= ~TxN_MASK; + + switch (cflag & CSIZE) { + case CS5: + uap->curregs[3] |= Rx5; + uap->curregs[5] |= Tx5; + uap->parity_mask = 0x1f; + break; + case CS6: + uap->curregs[3] |= Rx6; + uap->curregs[5] |= Tx6; + uap->parity_mask = 0x3f; + break; + case CS7: + uap->curregs[3] |= Rx7; + uap->curregs[5] |= Tx7; + uap->parity_mask = 0x7f; + break; + case CS8: + default: + uap->curregs[3] |= Rx8; + uap->curregs[5] |= Tx8; + uap->parity_mask = 0xff; + break; + } + uap->curregs[4] &= ~(SB_MASK); + if (cflag & CSTOPB) + uap->curregs[4] |= SB2; + else + uap->curregs[4] |= SB1; + if (cflag & PARENB) + uap->curregs[4] |= PAR_ENAB; + else + uap->curregs[4] &= ~PAR_ENAB; + if (!(cflag & PARODD)) + uap->curregs[4] |= PAR_EVEN; + else + uap->curregs[4] &= ~PAR_EVEN; + + uap->port.read_status_mask = Rx_OVR; + if (iflag & INPCK) + uap->port.read_status_mask |= CRC_ERR | PAR_ERR; + if (iflag & (IGNBRK | BRKINT | PARMRK)) + uap->port.read_status_mask |= BRK_ABRT; + + uap->port.ignore_status_mask = 0; + if (iflag & IGNPAR) + uap->port.ignore_status_mask |= CRC_ERR | PAR_ERR; + if (iflag & IGNBRK) { + uap->port.ignore_status_mask |= BRK_ABRT; + if (iflag & IGNPAR) + uap->port.ignore_status_mask |= Rx_OVR; + } + + if ((cflag & CREAD) == 0) + uap->port.ignore_status_mask = 0xff; +} + + +/* + * Set the irda codec on the imac to the specified baud rate. + */ +static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud) +{ + u8 cmdbyte; + int t, version; + + switch (*baud) { + /* SIR modes */ + case 2400: + cmdbyte = 0x53; + break; + case 4800: + cmdbyte = 0x52; + break; + case 9600: + cmdbyte = 0x51; + break; + case 19200: + cmdbyte = 0x50; + break; + case 38400: + cmdbyte = 0x4f; + break; + case 57600: + cmdbyte = 0x4e; + break; + case 115200: + cmdbyte = 0x4d; + break; + /* The FIR modes aren't really supported at this point, how + * do we select the speed ? via the FCR on KeyLargo ? + */ + case 1152000: + cmdbyte = 0; + break; + case 4000000: + cmdbyte = 0; + break; + default: /* 9600 */ + cmdbyte = 0x51; + *baud = 9600; + break; + } + + /* Wait for transmitter to drain */ + t = 10000; + while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0 + || (read_zsreg(uap, R1) & ALL_SNT) == 0) { + if (--t <= 0) { + pmz_error("transmitter didn't drain\n"); + return; + } + udelay(10); + } + + /* Drain the receiver too */ + t = 100; + (void)read_zsdata(uap); + (void)read_zsdata(uap); + (void)read_zsdata(uap); + mdelay(10); + while (read_zsreg(uap, R0) & Rx_CH_AV) { + read_zsdata(uap); + mdelay(10); + if (--t <= 0) { + pmz_error("receiver didn't drain\n"); + return; + } + } + + /* Switch to command mode */ + uap->curregs[R5] |= DTR; + write_zsreg(uap, R5, uap->curregs[R5]); + zssync(uap); + mdelay(1); + + /* Switch SCC to 19200 */ + pmz_convert_to_zs(uap, CS8, 0, 19200); + pmz_load_zsregs(uap, uap->curregs); + mdelay(1); + + /* Write get_version command byte */ + write_zsdata(uap, 1); + t = 5000; + while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) { + if (--t <= 0) { + pmz_error("irda_setup timed out on get_version byte\n"); + goto out; + } + udelay(10); + } + version = read_zsdata(uap); + + if (version < 4) { + pmz_info("IrDA: dongle version %d not supported\n", version); + goto out; + } + + /* Send speed mode */ + write_zsdata(uap, cmdbyte); + t = 5000; + while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) { + if (--t <= 0) { + pmz_error("irda_setup timed out on speed mode byte\n"); + goto out; + } + udelay(10); + } + t = read_zsdata(uap); + if (t != cmdbyte) + pmz_error("irda_setup speed mode byte = %x (%x)\n", t, cmdbyte); + + pmz_info("IrDA setup for %ld bps, dongle version: %d\n", + *baud, version); + + (void)read_zsdata(uap); + (void)read_zsdata(uap); + (void)read_zsdata(uap); + + out: + /* Switch back to data mode */ + uap->curregs[R5] &= ~DTR; + write_zsreg(uap, R5, uap->curregs[R5]); + zssync(uap); + + (void)read_zsdata(uap); + (void)read_zsdata(uap); + (void)read_zsdata(uap); +} + + +static void __pmz_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_pmac_port *uap = to_pmz(port); + unsigned long baud; + + pmz_debug("pmz: set_termios()\n"); + + memcpy(&uap->termios_cache, termios, sizeof(struct ktermios)); + + /* XXX Check which revs of machines actually allow 1 and 4Mb speeds + * on the IR dongle. Note that the IRTTY driver currently doesn't know + * about the FIR mode and high speed modes. So these are unused. For + * implementing proper support for these, we should probably add some + * DMA as well, at least on the Rx side, which isn't a simple thing + * at this point. + */ + if (ZS_IS_IRDA(uap)) { + /* Calc baud rate */ + baud = uart_get_baud_rate(port, termios, old, 1200, 4000000); + pmz_debug("pmz: switch IRDA to %ld bauds\n", baud); + /* Cet the irda codec to the right rate */ + pmz_irda_setup(uap, &baud); + /* Set final baud rate */ + pmz_convert_to_zs(uap, termios->c_cflag, termios->c_iflag, baud); + pmz_load_zsregs(uap, uap->curregs); + zssync(uap); + } else { + baud = uart_get_baud_rate(port, termios, old, 1200, 230400); + pmz_convert_to_zs(uap, termios->c_cflag, termios->c_iflag, baud); + /* Make sure modem status interrupts are correctly configured */ + if (UART_ENABLE_MS(&uap->port, termios->c_cflag)) { + uap->curregs[R15] |= DCDIE | SYNCIE | CTSIE; + uap->flags |= PMACZILOG_FLAG_MODEM_STATUS; + } else { + uap->curregs[R15] &= ~(DCDIE | SYNCIE | CTSIE); + uap->flags &= ~PMACZILOG_FLAG_MODEM_STATUS; + } + + /* Load registers to the chip */ + pmz_maybe_update_regs(uap); + } + uart_update_timeout(port, termios->c_cflag, baud); + + pmz_debug("pmz: set_termios() done.\n"); +} + +/* The port lock is not held. */ +static void pmz_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_pmac_port *uap = to_pmz(port); + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + /* Disable IRQs on the port */ + pmz_interrupt_control(uap, 0); + + /* Setup new port configuration */ + __pmz_set_termios(port, termios, old); + + /* Re-enable IRQs on the port */ + if (ZS_IS_OPEN(uap)) + pmz_interrupt_control(uap, 1); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *pmz_type(struct uart_port *port) +{ + struct uart_pmac_port *uap = to_pmz(port); + + if (ZS_IS_IRDA(uap)) + return "Z85c30 ESCC - Infrared port"; + else if (ZS_IS_INTMODEM(uap)) + return "Z85c30 ESCC - Internal modem"; + return "Z85c30 ESCC - Serial port"; +} + +/* We do not request/release mappings of the registers here, this + * happens at early serial probe time. + */ +static void pmz_release_port(struct uart_port *port) +{ +} + +static int pmz_request_port(struct uart_port *port) +{ + return 0; +} + +/* These do not need to do anything interesting either. */ +static void pmz_config_port(struct uart_port *port, int flags) +{ +} + +/* We do not support letting the user mess with the divisor, IRQ, etc. */ +static int pmz_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + return -EINVAL; +} + +#ifdef CONFIG_CONSOLE_POLL + +static int pmz_poll_get_char(struct uart_port *port) +{ + struct uart_pmac_port *uap = + container_of(port, struct uart_pmac_port, port); + int tries = 2; + + while (tries) { + if ((read_zsreg(uap, R0) & Rx_CH_AV) != 0) + return read_zsdata(uap); + if (tries--) + udelay(5); + } + + return NO_POLL_CHAR; +} + +static void pmz_poll_put_char(struct uart_port *port, unsigned char c) +{ + struct uart_pmac_port *uap = + container_of(port, struct uart_pmac_port, port); + + /* Wait for the transmit buffer to empty. */ + while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0) + udelay(5); + write_zsdata(uap, c); +} + +#endif /* CONFIG_CONSOLE_POLL */ + +static const struct uart_ops pmz_pops = { + .tx_empty = pmz_tx_empty, + .set_mctrl = pmz_set_mctrl, + .get_mctrl = pmz_get_mctrl, + .stop_tx = pmz_stop_tx, + .start_tx = pmz_start_tx, + .stop_rx = pmz_stop_rx, + .enable_ms = pmz_enable_ms, + .break_ctl = pmz_break_ctl, + .startup = pmz_startup, + .shutdown = pmz_shutdown, + .set_termios = pmz_set_termios, + .type = pmz_type, + .release_port = pmz_release_port, + .request_port = pmz_request_port, + .config_port = pmz_config_port, + .verify_port = pmz_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = pmz_poll_get_char, + .poll_put_char = pmz_poll_put_char, +#endif +}; + +#ifdef CONFIG_PPC_PMAC + +/* + * Setup one port structure after probing, HW is down at this point, + * Unlike sunzilog, we don't need to pre-init the spinlock as we don't + * register our console before uart_add_one_port() is called + */ +static int __init pmz_init_port(struct uart_pmac_port *uap) +{ + struct device_node *np = uap->node; + const char *conn; + const struct slot_names_prop { + int count; + char name[1]; + } *slots; + int len; + struct resource r_ports, r_rxdma, r_txdma; + + /* + * Request & map chip registers + */ + if (of_address_to_resource(np, 0, &r_ports)) + return -ENODEV; + uap->port.mapbase = r_ports.start; + uap->port.membase = ioremap(uap->port.mapbase, 0x1000); + + uap->control_reg = uap->port.membase; + uap->data_reg = uap->control_reg + 0x10; + + /* + * Request & map DBDMA registers + */ +#ifdef HAS_DBDMA + if (of_address_to_resource(np, 1, &r_txdma) == 0 && + of_address_to_resource(np, 2, &r_rxdma) == 0) + uap->flags |= PMACZILOG_FLAG_HAS_DMA; +#else + memset(&r_txdma, 0, sizeof(struct resource)); + memset(&r_rxdma, 0, sizeof(struct resource)); +#endif + if (ZS_HAS_DMA(uap)) { + uap->tx_dma_regs = ioremap(r_txdma.start, 0x100); + if (uap->tx_dma_regs == NULL) { + uap->flags &= ~PMACZILOG_FLAG_HAS_DMA; + goto no_dma; + } + uap->rx_dma_regs = ioremap(r_rxdma.start, 0x100); + if (uap->rx_dma_regs == NULL) { + iounmap(uap->tx_dma_regs); + uap->tx_dma_regs = NULL; + uap->flags &= ~PMACZILOG_FLAG_HAS_DMA; + goto no_dma; + } + uap->tx_dma_irq = irq_of_parse_and_map(np, 1); + uap->rx_dma_irq = irq_of_parse_and_map(np, 2); + } +no_dma: + + /* + * Detect port type + */ + if (of_device_is_compatible(np, "cobalt")) + uap->flags |= PMACZILOG_FLAG_IS_INTMODEM; + conn = of_get_property(np, "AAPL,connector", &len); + if (conn && (strcmp(conn, "infrared") == 0)) + uap->flags |= PMACZILOG_FLAG_IS_IRDA; + uap->port_type = PMAC_SCC_ASYNC; + /* 1999 Powerbook G3 has slot-names property instead */ + slots = of_get_property(np, "slot-names", &len); + if (slots && slots->count > 0) { + if (strcmp(slots->name, "IrDA") == 0) + uap->flags |= PMACZILOG_FLAG_IS_IRDA; + else if (strcmp(slots->name, "Modem") == 0) + uap->flags |= PMACZILOG_FLAG_IS_INTMODEM; + } + if (ZS_IS_IRDA(uap)) + uap->port_type = PMAC_SCC_IRDA; + if (ZS_IS_INTMODEM(uap)) { + struct device_node* i2c_modem = + of_find_node_by_name(NULL, "i2c-modem"); + if (i2c_modem) { + const char* mid = + of_get_property(i2c_modem, "modem-id", NULL); + if (mid) switch(*mid) { + case 0x04 : + case 0x05 : + case 0x07 : + case 0x08 : + case 0x0b : + case 0x0c : + uap->port_type = PMAC_SCC_I2S1; + } + printk(KERN_INFO "pmac_zilog: i2c-modem detected, id: %d\n", + mid ? (*mid) : 0); + of_node_put(i2c_modem); + } else { + printk(KERN_INFO "pmac_zilog: serial modem detected\n"); + } + } + + /* + * Init remaining bits of "port" structure + */ + uap->port.iotype = UPIO_MEM; + uap->port.irq = irq_of_parse_and_map(np, 0); + uap->port.uartclk = ZS_CLOCK; + uap->port.fifosize = 1; + uap->port.ops = &pmz_pops; + uap->port.type = PORT_PMAC_ZILOG; + uap->port.flags = 0; + + /* + * Fixup for the port on Gatwick for which the device-tree has + * missing interrupts. Normally, the macio_dev would contain + * fixed up interrupt info, but we use the device-tree directly + * here due to early probing so we need the fixup too. + */ + if (uap->port.irq == 0 && + np->parent && np->parent->parent && + of_device_is_compatible(np->parent->parent, "gatwick")) { + /* IRQs on gatwick are offset by 64 */ + uap->port.irq = irq_create_mapping(NULL, 64 + 15); + uap->tx_dma_irq = irq_create_mapping(NULL, 64 + 4); + uap->rx_dma_irq = irq_create_mapping(NULL, 64 + 5); + } + + /* Setup some valid baud rate information in the register + * shadows so we don't write crap there before baud rate is + * first initialized. + */ + pmz_convert_to_zs(uap, CS8, 0, 9600); + + return 0; +} + +/* + * Get rid of a port on module removal + */ +static void pmz_dispose_port(struct uart_pmac_port *uap) +{ + struct device_node *np; + + np = uap->node; + iounmap(uap->rx_dma_regs); + iounmap(uap->tx_dma_regs); + iounmap(uap->control_reg); + uap->node = NULL; + of_node_put(np); + memset(uap, 0, sizeof(struct uart_pmac_port)); +} + +/* + * Called upon match with an escc node in the device-tree. + */ +static int pmz_attach(struct macio_dev *mdev, const struct of_device_id *match) +{ + struct uart_pmac_port *uap; + int i; + + /* Iterate the pmz_ports array to find a matching entry + */ + for (i = 0; i < MAX_ZS_PORTS; i++) + if (pmz_ports[i].node == mdev->ofdev.dev.of_node) + break; + if (i >= MAX_ZS_PORTS) + return -ENODEV; + + + uap = &pmz_ports[i]; + uap->dev = mdev; + uap->port.dev = &mdev->ofdev.dev; + dev_set_drvdata(&mdev->ofdev.dev, uap); + + /* We still activate the port even when failing to request resources + * to work around bugs in ancient Apple device-trees + */ + if (macio_request_resources(uap->dev, "pmac_zilog")) + printk(KERN_WARNING "%pOFn: Failed to request resource" + ", port still active\n", + uap->node); + else + uap->flags |= PMACZILOG_FLAG_RSRC_REQUESTED; + + return uart_add_one_port(&pmz_uart_reg, &uap->port); +} + +/* + * That one should not be called, macio isn't really a hotswap device, + * we don't expect one of those serial ports to go away... + */ +static int pmz_detach(struct macio_dev *mdev) +{ + struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev); + + if (!uap) + return -ENODEV; + + uart_remove_one_port(&pmz_uart_reg, &uap->port); + + if (uap->flags & PMACZILOG_FLAG_RSRC_REQUESTED) { + macio_release_resources(uap->dev); + uap->flags &= ~PMACZILOG_FLAG_RSRC_REQUESTED; + } + dev_set_drvdata(&mdev->ofdev.dev, NULL); + uap->dev = NULL; + uap->port.dev = NULL; + + return 0; +} + + +static int pmz_suspend(struct macio_dev *mdev, pm_message_t pm_state) +{ + struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev); + + if (uap == NULL) { + printk("HRM... pmz_suspend with NULL uap\n"); + return 0; + } + + uart_suspend_port(&pmz_uart_reg, &uap->port); + + return 0; +} + + +static int pmz_resume(struct macio_dev *mdev) +{ + struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev); + + if (uap == NULL) + return 0; + + uart_resume_port(&pmz_uart_reg, &uap->port); + + return 0; +} + +/* + * Probe all ports in the system and build the ports array, we register + * with the serial layer later, so we get a proper struct device which + * allows the tty to attach properly. This is later than it used to be + * but the tty layer really wants it that way. + */ +static int __init pmz_probe(void) +{ + struct device_node *node_p, *node_a, *node_b, *np; + int count = 0; + int rc; + + /* + * Find all escc chips in the system + */ + for_each_node_by_name(node_p, "escc") { + /* + * First get channel A/B node pointers + * + * TODO: Add routines with proper locking to do that... + */ + node_a = node_b = NULL; + for_each_child_of_node(node_p, np) { + if (of_node_name_prefix(np, "ch-a")) + node_a = of_node_get(np); + else if (of_node_name_prefix(np, "ch-b")) + node_b = of_node_get(np); + } + if (!node_a && !node_b) { + of_node_put(node_a); + of_node_put(node_b); + printk(KERN_ERR "pmac_zilog: missing node %c for escc %pOF\n", + (!node_a) ? 'a' : 'b', node_p); + continue; + } + + /* + * Fill basic fields in the port structures + */ + if (node_b != NULL) { + pmz_ports[count].mate = &pmz_ports[count+1]; + pmz_ports[count+1].mate = &pmz_ports[count]; + } + pmz_ports[count].flags = PMACZILOG_FLAG_IS_CHANNEL_A; + pmz_ports[count].node = node_a; + pmz_ports[count+1].node = node_b; + pmz_ports[count].port.line = count; + pmz_ports[count+1].port.line = count+1; + + /* + * Setup the ports for real + */ + rc = pmz_init_port(&pmz_ports[count]); + if (rc == 0 && node_b != NULL) + rc = pmz_init_port(&pmz_ports[count+1]); + if (rc != 0) { + of_node_put(node_a); + of_node_put(node_b); + memset(&pmz_ports[count], 0, sizeof(struct uart_pmac_port)); + memset(&pmz_ports[count+1], 0, sizeof(struct uart_pmac_port)); + continue; + } + count += 2; + } + pmz_ports_count = count; + + return 0; +} + +#else + +/* On PCI PowerMacs, pmz_probe() does an explicit search of the OpenFirmware + * tree to obtain the device_nodes needed to start the console before the + * macio driver. On Macs without OpenFirmware, global platform_devices take + * the place of those device_nodes. + */ +extern struct platform_device scc_a_pdev, scc_b_pdev; + +static int __init pmz_init_port(struct uart_pmac_port *uap) +{ + struct resource *r_ports, *r_irq; + + r_ports = platform_get_resource(uap->pdev, IORESOURCE_MEM, 0); + r_irq = platform_get_resource(uap->pdev, IORESOURCE_IRQ, 0); + if (!r_ports || !r_irq) + return -ENODEV; + + uap->port.mapbase = r_ports->start; + uap->port.membase = (unsigned char __iomem *) r_ports->start; + uap->port.iotype = UPIO_MEM; + uap->port.irq = r_irq->start; + uap->port.uartclk = ZS_CLOCK; + uap->port.fifosize = 1; + uap->port.ops = &pmz_pops; + uap->port.type = PORT_PMAC_ZILOG; + uap->port.flags = 0; + + uap->control_reg = uap->port.membase; + uap->data_reg = uap->control_reg + 4; + uap->port_type = 0; + uap->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_PMACZILOG_CONSOLE); + + pmz_convert_to_zs(uap, CS8, 0, 9600); + + return 0; +} + +static int __init pmz_probe(void) +{ + int err; + + pmz_ports_count = 0; + + pmz_ports[0].port.line = 0; + pmz_ports[0].flags = PMACZILOG_FLAG_IS_CHANNEL_A; + pmz_ports[0].pdev = &scc_a_pdev; + err = pmz_init_port(&pmz_ports[0]); + if (err) + return err; + pmz_ports_count++; + + pmz_ports[0].mate = &pmz_ports[1]; + pmz_ports[1].mate = &pmz_ports[0]; + pmz_ports[1].port.line = 1; + pmz_ports[1].flags = 0; + pmz_ports[1].pdev = &scc_b_pdev; + err = pmz_init_port(&pmz_ports[1]); + if (err) + return err; + pmz_ports_count++; + + return 0; +} + +static void pmz_dispose_port(struct uart_pmac_port *uap) +{ + memset(uap, 0, sizeof(struct uart_pmac_port)); +} + +static int __init pmz_attach(struct platform_device *pdev) +{ + struct uart_pmac_port *uap; + int i; + + /* Iterate the pmz_ports array to find a matching entry */ + for (i = 0; i < pmz_ports_count; i++) + if (pmz_ports[i].pdev == pdev) + break; + if (i >= pmz_ports_count) + return -ENODEV; + + uap = &pmz_ports[i]; + uap->port.dev = &pdev->dev; + platform_set_drvdata(pdev, uap); + + return uart_add_one_port(&pmz_uart_reg, &uap->port); +} + +static int __exit pmz_detach(struct platform_device *pdev) +{ + struct uart_pmac_port *uap = platform_get_drvdata(pdev); + + if (!uap) + return -ENODEV; + + uart_remove_one_port(&pmz_uart_reg, &uap->port); + + uap->port.dev = NULL; + + return 0; +} + +#endif /* !CONFIG_PPC_PMAC */ + +#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE + +static void pmz_console_write(struct console *con, const char *s, unsigned int count); +static int __init pmz_console_setup(struct console *co, char *options); + +static struct console pmz_console = { + .name = PMACZILOG_NAME, + .write = pmz_console_write, + .device = uart_console_device, + .setup = pmz_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &pmz_uart_reg, +}; + +#define PMACZILOG_CONSOLE &pmz_console +#else /* CONFIG_SERIAL_PMACZILOG_CONSOLE */ +#define PMACZILOG_CONSOLE (NULL) +#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */ + +/* + * Register the driver, console driver and ports with the serial + * core + */ +static int __init pmz_register(void) +{ + pmz_uart_reg.nr = pmz_ports_count; + pmz_uart_reg.cons = PMACZILOG_CONSOLE; + + /* + * Register this driver with the serial core + */ + return uart_register_driver(&pmz_uart_reg); +} + +#ifdef CONFIG_PPC_PMAC + +static const struct of_device_id pmz_match[] = +{ + { + .name = "ch-a", + }, + { + .name = "ch-b", + }, + {}, +}; +MODULE_DEVICE_TABLE (of, pmz_match); + +static struct macio_driver pmz_driver = { + .driver = { + .name = "pmac_zilog", + .owner = THIS_MODULE, + .of_match_table = pmz_match, + }, + .probe = pmz_attach, + .remove = pmz_detach, + .suspend = pmz_suspend, + .resume = pmz_resume, +}; + +#else + +static struct platform_driver pmz_driver = { + .remove = __exit_p(pmz_detach), + .driver = { + .name = "scc", + }, +}; + +#endif /* !CONFIG_PPC_PMAC */ + +static int __init init_pmz(void) +{ + int rc, i; + printk(KERN_INFO "%s\n", version); + + /* + * First, we need to do a direct OF-based probe pass. We + * do that because we want serial console up before the + * macio stuffs calls us back, and since that makes it + * easier to pass the proper number of channels to + * uart_register_driver() + */ + if (pmz_ports_count == 0) + pmz_probe(); + + /* + * Bail early if no port found + */ + if (pmz_ports_count == 0) + return -ENODEV; + + /* + * Now we register with the serial layer + */ + rc = pmz_register(); + if (rc) { + printk(KERN_ERR + "pmac_zilog: Error registering serial device, disabling pmac_zilog.\n" + "pmac_zilog: Did another serial driver already claim the minors?\n"); + /* effectively "pmz_unprobe()" */ + for (i=0; i < pmz_ports_count; i++) + pmz_dispose_port(&pmz_ports[i]); + return rc; + } + + /* + * Then we register the macio driver itself + */ +#ifdef CONFIG_PPC_PMAC + return macio_register_driver(&pmz_driver); +#else + return platform_driver_probe(&pmz_driver, pmz_attach); +#endif +} + +static void __exit exit_pmz(void) +{ + int i; + +#ifdef CONFIG_PPC_PMAC + /* Get rid of macio-driver (detach from macio) */ + macio_unregister_driver(&pmz_driver); +#else + platform_driver_unregister(&pmz_driver); +#endif + + for (i = 0; i < pmz_ports_count; i++) { + struct uart_pmac_port *uport = &pmz_ports[i]; +#ifdef CONFIG_PPC_PMAC + if (uport->node != NULL) + pmz_dispose_port(uport); +#else + if (uport->pdev != NULL) + pmz_dispose_port(uport); +#endif + } + /* Unregister UART driver */ + uart_unregister_driver(&pmz_uart_reg); +} + +#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE + +static void pmz_console_putchar(struct uart_port *port, int ch) +{ + struct uart_pmac_port *uap = + container_of(port, struct uart_pmac_port, port); + + /* Wait for the transmit buffer to empty. */ + while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0) + udelay(5); + write_zsdata(uap, ch); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + */ +static void pmz_console_write(struct console *con, const char *s, unsigned int count) +{ + struct uart_pmac_port *uap = &pmz_ports[con->index]; + unsigned long flags; + + spin_lock_irqsave(&uap->port.lock, flags); + + /* Turn of interrupts and enable the transmitter. */ + write_zsreg(uap, R1, uap->curregs[1] & ~TxINT_ENAB); + write_zsreg(uap, R5, uap->curregs[5] | TxENABLE | RTS | DTR); + + uart_console_write(&uap->port, s, count, pmz_console_putchar); + + /* Restore the values in the registers. */ + write_zsreg(uap, R1, uap->curregs[1]); + /* Don't disable the transmitter. */ + + spin_unlock_irqrestore(&uap->port.lock, flags); +} + +/* + * Setup the serial console + */ +static int __init pmz_console_setup(struct console *co, char *options) +{ + struct uart_pmac_port *uap; + struct uart_port *port; + int baud = 38400; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + unsigned long pwr_delay; + + /* + * XServe's default to 57600 bps + */ + if (of_machine_is_compatible("RackMac1,1") + || of_machine_is_compatible("RackMac1,2") + || of_machine_is_compatible("MacRISC4")) + baud = 57600; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= pmz_ports_count) + co->index = 0; + uap = &pmz_ports[co->index]; +#ifdef CONFIG_PPC_PMAC + if (uap->node == NULL) + return -ENODEV; +#else + if (uap->pdev == NULL) + return -ENODEV; +#endif + port = &uap->port; + + /* + * Mark port as beeing a console + */ + uap->flags |= PMACZILOG_FLAG_IS_CONS; + + /* + * Temporary fix for uart layer who didn't setup the spinlock yet + */ + spin_lock_init(&port->lock); + + /* + * Enable the hardware + */ + pwr_delay = __pmz_startup(uap); + if (pwr_delay) + mdelay(pwr_delay); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static int __init pmz_console_init(void) +{ + /* Probe ports */ + pmz_probe(); + + if (pmz_ports_count == 0) + return -ENODEV; + + /* TODO: Autoprobe console based on OF */ + /* pmz_console.index = i; */ + register_console(&pmz_console); + + return 0; + +} +console_initcall(pmz_console_init); +#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */ + +module_init(init_pmz); +module_exit(exit_pmz); diff --git a/drivers/tty/serial/pmac_zilog.h b/drivers/tty/serial/pmac_zilog.h new file mode 100644 index 000000000..bb874e768 --- /dev/null +++ b/drivers/tty/serial/pmac_zilog.h @@ -0,0 +1,384 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __PMAC_ZILOG_H__ +#define __PMAC_ZILOG_H__ + +/* + * At most 2 ESCCs with 2 ports each + */ +#define MAX_ZS_PORTS 4 + +/* + * We wrap our port structure around the generic uart_port. + */ +#define NUM_ZSREGS 17 + +struct uart_pmac_port { + struct uart_port port; + struct uart_pmac_port *mate; + +#ifdef CONFIG_PPC_PMAC + /* macio_dev for the escc holding this port (maybe be null on + * early inited port) + */ + struct macio_dev *dev; + /* device node to this port, this points to one of 2 childs + * of "escc" node (ie. ch-a or ch-b) + */ + struct device_node *node; +#else + struct platform_device *pdev; +#endif + + /* Port type as obtained from device tree (IRDA, modem, ...) */ + int port_type; + u8 curregs[NUM_ZSREGS]; + + unsigned int flags; +#define PMACZILOG_FLAG_IS_CONS 0x00000001 +#define PMACZILOG_FLAG_IS_KGDB 0x00000002 +#define PMACZILOG_FLAG_MODEM_STATUS 0x00000004 +#define PMACZILOG_FLAG_IS_CHANNEL_A 0x00000008 +#define PMACZILOG_FLAG_REGS_HELD 0x00000010 +#define PMACZILOG_FLAG_TX_STOPPED 0x00000020 +#define PMACZILOG_FLAG_TX_ACTIVE 0x00000040 +#define PMACZILOG_FLAG_IS_IRDA 0x00000100 +#define PMACZILOG_FLAG_IS_INTMODEM 0x00000200 +#define PMACZILOG_FLAG_HAS_DMA 0x00000400 +#define PMACZILOG_FLAG_RSRC_REQUESTED 0x00000800 +#define PMACZILOG_FLAG_IS_OPEN 0x00002000 +#define PMACZILOG_FLAG_IS_EXTCLK 0x00008000 +#define PMACZILOG_FLAG_BREAK 0x00010000 + + unsigned char parity_mask; + unsigned char prev_status; + + volatile u8 __iomem *control_reg; + volatile u8 __iomem *data_reg; + +#ifdef CONFIG_PPC_PMAC + unsigned int tx_dma_irq; + unsigned int rx_dma_irq; + volatile struct dbdma_regs __iomem *tx_dma_regs; + volatile struct dbdma_regs __iomem *rx_dma_regs; +#endif + + unsigned char irq_name[8]; + + struct ktermios termios_cache; +}; + +#define to_pmz(p) ((struct uart_pmac_port *)(p)) + +static inline struct uart_pmac_port *pmz_get_port_A(struct uart_pmac_port *uap) +{ + if (uap->flags & PMACZILOG_FLAG_IS_CHANNEL_A) + return uap; + return uap->mate; +} + +/* + * Register accessors. Note that we don't need to enforce a recovery + * delay on PCI PowerMac hardware, it's dealt in HW by the MacIO chip, + * though if we try to use this driver on older machines, we might have + * to add it back + */ +static inline u8 read_zsreg(struct uart_pmac_port *port, u8 reg) +{ + if (reg != 0) + writeb(reg, port->control_reg); + return readb(port->control_reg); +} + +static inline void write_zsreg(struct uart_pmac_port *port, u8 reg, u8 value) +{ + if (reg != 0) + writeb(reg, port->control_reg); + writeb(value, port->control_reg); +} + +static inline u8 read_zsdata(struct uart_pmac_port *port) +{ + return readb(port->data_reg); +} + +static inline void write_zsdata(struct uart_pmac_port *port, u8 data) +{ + writeb(data, port->data_reg); +} + +static inline void zssync(struct uart_pmac_port *port) +{ + (void)readb(port->control_reg); +} + +/* Conversion routines to/from brg time constants from/to bits + * per second. + */ +#define BRG_TO_BPS(brg, freq) ((freq) / 2 / ((brg) + 2)) +#define BPS_TO_BRG(bps, freq) ((((freq) + (bps)) / (2 * (bps))) - 2) + +#define ZS_CLOCK 3686400 /* Z8530 RTxC input clock rate */ + +/* The Zilog register set */ + +#define FLAG 0x7e + +/* Write Register 0 */ +#define R0 0 /* Register selects */ +#define R1 1 +#define R2 2 +#define R3 3 +#define R4 4 +#define R5 5 +#define R6 6 +#define R7 7 +#define R8 8 +#define R9 9 +#define R10 10 +#define R11 11 +#define R12 12 +#define R13 13 +#define R14 14 +#define R15 15 +#define R7P 16 + +#define NULLCODE 0 /* Null Code */ +#define POINT_HIGH 0x8 /* Select upper half of registers */ +#define RES_EXT_INT 0x10 /* Reset Ext. Status Interrupts */ +#define SEND_ABORT 0x18 /* HDLC Abort */ +#define RES_RxINT_FC 0x20 /* Reset RxINT on First Character */ +#define RES_Tx_P 0x28 /* Reset TxINT Pending */ +#define ERR_RES 0x30 /* Error Reset */ +#define RES_H_IUS 0x38 /* Reset highest IUS */ + +#define RES_Rx_CRC 0x40 /* Reset Rx CRC Checker */ +#define RES_Tx_CRC 0x80 /* Reset Tx CRC Checker */ +#define RES_EOM_L 0xC0 /* Reset EOM latch */ + +/* Write Register 1 */ + +#define EXT_INT_ENAB 0x1 /* Ext Int Enable */ +#define TxINT_ENAB 0x2 /* Tx Int Enable */ +#define PAR_SPEC 0x4 /* Parity is special condition */ + +#define RxINT_DISAB 0 /* Rx Int Disable */ +#define RxINT_FCERR 0x8 /* Rx Int on First Character Only or Error */ +#define INT_ALL_Rx 0x10 /* Int on all Rx Characters or error */ +#define INT_ERR_Rx 0x18 /* Int on error only */ +#define RxINT_MASK 0x18 + +#define WT_RDY_RT 0x20 /* W/Req reflects recv if 1, xmit if 0 */ +#define WT_FN_RDYFN 0x40 /* W/Req pin is DMA request if 1, wait if 0 */ +#define WT_RDY_ENAB 0x80 /* Enable W/Req pin */ + +/* Write Register #2 (Interrupt Vector) */ + +/* Write Register 3 */ + +#define RxENABLE 0x1 /* Rx Enable */ +#define SYNC_L_INH 0x2 /* Sync Character Load Inhibit */ +#define ADD_SM 0x4 /* Address Search Mode (SDLC) */ +#define RxCRC_ENAB 0x8 /* Rx CRC Enable */ +#define ENT_HM 0x10 /* Enter Hunt Mode */ +#define AUTO_ENAB 0x20 /* Auto Enables */ +#define Rx5 0x0 /* Rx 5 Bits/Character */ +#define Rx7 0x40 /* Rx 7 Bits/Character */ +#define Rx6 0x80 /* Rx 6 Bits/Character */ +#define Rx8 0xc0 /* Rx 8 Bits/Character */ +#define RxN_MASK 0xc0 + +/* Write Register 4 */ + +#define PAR_ENAB 0x1 /* Parity Enable */ +#define PAR_EVEN 0x2 /* Parity Even/Odd* */ + +#define SYNC_ENAB 0 /* Sync Modes Enable */ +#define SB1 0x4 /* 1 stop bit/char */ +#define SB15 0x8 /* 1.5 stop bits/char */ +#define SB2 0xc /* 2 stop bits/char */ +#define SB_MASK 0xc + +#define MONSYNC 0 /* 8 Bit Sync character */ +#define BISYNC 0x10 /* 16 bit sync character */ +#define SDLC 0x20 /* SDLC Mode (01111110 Sync Flag) */ +#define EXTSYNC 0x30 /* External Sync Mode */ + +#define X1CLK 0x0 /* x1 clock mode */ +#define X16CLK 0x40 /* x16 clock mode */ +#define X32CLK 0x80 /* x32 clock mode */ +#define X64CLK 0xC0 /* x64 clock mode */ +#define XCLK_MASK 0xC0 + +/* Write Register 5 */ + +#define TxCRC_ENAB 0x1 /* Tx CRC Enable */ +#define RTS 0x2 /* RTS */ +#define SDLC_CRC 0x4 /* SDLC/CRC-16 */ +#define TxENABLE 0x8 /* Tx Enable */ +#define SND_BRK 0x10 /* Send Break */ +#define Tx5 0x0 /* Tx 5 bits (or less)/character */ +#define Tx7 0x20 /* Tx 7 bits/character */ +#define Tx6 0x40 /* Tx 6 bits/character */ +#define Tx8 0x60 /* Tx 8 bits/character */ +#define TxN_MASK 0x60 +#define DTR 0x80 /* DTR */ + +/* Write Register 6 (Sync bits 0-7/SDLC Address Field) */ + +/* Write Register 7 (Sync bits 8-15/SDLC 01111110) */ + +/* Write Register 7' (Some enhanced feature control) */ +#define ENEXREAD 0x40 /* Enable read of some write registers */ + +/* Write Register 8 (transmit buffer) */ + +/* Write Register 9 (Master interrupt control) */ +#define VIS 1 /* Vector Includes Status */ +#define NV 2 /* No Vector */ +#define DLC 4 /* Disable Lower Chain */ +#define MIE 8 /* Master Interrupt Enable */ +#define STATHI 0x10 /* Status high */ +#define NORESET 0 /* No reset on write to R9 */ +#define CHRB 0x40 /* Reset channel B */ +#define CHRA 0x80 /* Reset channel A */ +#define FHWRES 0xc0 /* Force hardware reset */ + +/* Write Register 10 (misc control bits) */ +#define BIT6 1 /* 6 bit/8bit sync */ +#define LOOPMODE 2 /* SDLC Loop mode */ +#define ABUNDER 4 /* Abort/flag on SDLC xmit underrun */ +#define MARKIDLE 8 /* Mark/flag on idle */ +#define GAOP 0x10 /* Go active on poll */ +#define NRZ 0 /* NRZ mode */ +#define NRZI 0x20 /* NRZI mode */ +#define FM1 0x40 /* FM1 (transition = 1) */ +#define FM0 0x60 /* FM0 (transition = 0) */ +#define CRCPS 0x80 /* CRC Preset I/O */ + +/* Write Register 11 (Clock Mode control) */ +#define TRxCXT 0 /* TRxC = Xtal output */ +#define TRxCTC 1 /* TRxC = Transmit clock */ +#define TRxCBR 2 /* TRxC = BR Generator Output */ +#define TRxCDP 3 /* TRxC = DPLL output */ +#define TRxCOI 4 /* TRxC O/I */ +#define TCRTxCP 0 /* Transmit clock = RTxC pin */ +#define TCTRxCP 8 /* Transmit clock = TRxC pin */ +#define TCBR 0x10 /* Transmit clock = BR Generator output */ +#define TCDPLL 0x18 /* Transmit clock = DPLL output */ +#define RCRTxCP 0 /* Receive clock = RTxC pin */ +#define RCTRxCP 0x20 /* Receive clock = TRxC pin */ +#define RCBR 0x40 /* Receive clock = BR Generator output */ +#define RCDPLL 0x60 /* Receive clock = DPLL output */ +#define RTxCX 0x80 /* RTxC Xtal/No Xtal */ + +/* Write Register 12 (lower byte of baud rate generator time constant) */ + +/* Write Register 13 (upper byte of baud rate generator time constant) */ + +/* Write Register 14 (Misc control bits) */ +#define BRENAB 1 /* Baud rate generator enable */ +#define BRSRC 2 /* Baud rate generator source */ +#define DTRREQ 4 /* DTR/Request function */ +#define AUTOECHO 8 /* Auto Echo */ +#define LOOPBAK 0x10 /* Local loopback */ +#define SEARCH 0x20 /* Enter search mode */ +#define RMC 0x40 /* Reset missing clock */ +#define DISDPLL 0x60 /* Disable DPLL */ +#define SSBR 0x80 /* Set DPLL source = BR generator */ +#define SSRTxC 0xa0 /* Set DPLL source = RTxC */ +#define SFMM 0xc0 /* Set FM mode */ +#define SNRZI 0xe0 /* Set NRZI mode */ + +/* Write Register 15 (external/status interrupt control) */ +#define EN85C30 1 /* Enable some 85c30-enhanced registers */ +#define ZCIE 2 /* Zero count IE */ +#define ENSTFIFO 4 /* Enable status FIFO (SDLC) */ +#define DCDIE 8 /* DCD IE */ +#define SYNCIE 0x10 /* Sync/hunt IE */ +#define CTSIE 0x20 /* CTS IE */ +#define TxUIE 0x40 /* Tx Underrun/EOM IE */ +#define BRKIE 0x80 /* Break/Abort IE */ + + +/* Read Register 0 */ +#define Rx_CH_AV 0x1 /* Rx Character Available */ +#define ZCOUNT 0x2 /* Zero count */ +#define Tx_BUF_EMP 0x4 /* Tx Buffer empty */ +#define DCD 0x8 /* DCD */ +#define SYNC_HUNT 0x10 /* Sync/hunt */ +#define CTS 0x20 /* CTS */ +#define TxEOM 0x40 /* Tx underrun */ +#define BRK_ABRT 0x80 /* Break/Abort */ + +/* Read Register 1 */ +#define ALL_SNT 0x1 /* All sent */ +/* Residue Data for 8 Rx bits/char programmed */ +#define RES3 0x8 /* 0/3 */ +#define RES4 0x4 /* 0/4 */ +#define RES5 0xc /* 0/5 */ +#define RES6 0x2 /* 0/6 */ +#define RES7 0xa /* 0/7 */ +#define RES8 0x6 /* 0/8 */ +#define RES18 0xe /* 1/8 */ +#define RES28 0x0 /* 2/8 */ +/* Special Rx Condition Interrupts */ +#define PAR_ERR 0x10 /* Parity error */ +#define Rx_OVR 0x20 /* Rx Overrun Error */ +#define CRC_ERR 0x40 /* CRC/Framing Error */ +#define END_FR 0x80 /* End of Frame (SDLC) */ + +/* Read Register 2 (channel b only) - Interrupt vector */ +#define CHB_Tx_EMPTY 0x00 +#define CHB_EXT_STAT 0x02 +#define CHB_Rx_AVAIL 0x04 +#define CHB_SPECIAL 0x06 +#define CHA_Tx_EMPTY 0x08 +#define CHA_EXT_STAT 0x0a +#define CHA_Rx_AVAIL 0x0c +#define CHA_SPECIAL 0x0e +#define STATUS_MASK 0x06 + +/* Read Register 3 (interrupt pending register) ch a only */ +#define CHBEXT 0x1 /* Channel B Ext/Stat IP */ +#define CHBTxIP 0x2 /* Channel B Tx IP */ +#define CHBRxIP 0x4 /* Channel B Rx IP */ +#define CHAEXT 0x8 /* Channel A Ext/Stat IP */ +#define CHATxIP 0x10 /* Channel A Tx IP */ +#define CHARxIP 0x20 /* Channel A Rx IP */ + +/* Read Register 8 (receive data register) */ + +/* Read Register 10 (misc status bits) */ +#define ONLOOP 2 /* On loop */ +#define LOOPSEND 0x10 /* Loop sending */ +#define CLK2MIS 0x40 /* Two clocks missing */ +#define CLK1MIS 0x80 /* One clock missing */ + +/* Read Register 12 (lower byte of baud rate generator constant) */ + +/* Read Register 13 (upper byte of baud rate generator constant) */ + +/* Read Register 15 (value of WR 15) */ + +/* Misc macros */ +#define ZS_CLEARERR(port) (write_zsreg(port, 0, ERR_RES)) +#define ZS_CLEARFIFO(port) do { volatile unsigned char garbage; \ + garbage = read_zsdata(port); \ + garbage = read_zsdata(port); \ + garbage = read_zsdata(port); \ + } while(0) + +#define ZS_IS_CONS(UP) ((UP)->flags & PMACZILOG_FLAG_IS_CONS) +#define ZS_IS_KGDB(UP) ((UP)->flags & PMACZILOG_FLAG_IS_KGDB) +#define ZS_IS_CHANNEL_A(UP) ((UP)->flags & PMACZILOG_FLAG_IS_CHANNEL_A) +#define ZS_REGS_HELD(UP) ((UP)->flags & PMACZILOG_FLAG_REGS_HELD) +#define ZS_TX_STOPPED(UP) ((UP)->flags & PMACZILOG_FLAG_TX_STOPPED) +#define ZS_TX_ACTIVE(UP) ((UP)->flags & PMACZILOG_FLAG_TX_ACTIVE) +#define ZS_WANTS_MODEM_STATUS(UP) ((UP)->flags & PMACZILOG_FLAG_MODEM_STATUS) +#define ZS_IS_IRDA(UP) ((UP)->flags & PMACZILOG_FLAG_IS_IRDA) +#define ZS_IS_INTMODEM(UP) ((UP)->flags & PMACZILOG_FLAG_IS_INTMODEM) +#define ZS_HAS_DMA(UP) ((UP)->flags & PMACZILOG_FLAG_HAS_DMA) +#define ZS_IS_OPEN(UP) ((UP)->flags & PMACZILOG_FLAG_IS_OPEN) +#define ZS_IS_EXTCLK(UP) ((UP)->flags & PMACZILOG_FLAG_IS_EXTCLK) + +#endif /* __PMAC_ZILOG_H__ */ diff --git a/drivers/tty/serial/pnx8xxx_uart.c b/drivers/tty/serial/pnx8xxx_uart.c new file mode 100644 index 000000000..972d94e8d --- /dev/null +++ b/drivers/tty/serial/pnx8xxx_uart.c @@ -0,0 +1,858 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * UART driver for PNX8XXX SoCs + * + * Author: Per Hallsmark per.hallsmark@mvista.com + * Ported to 2.6 kernel by EmbeddedAlley + * Reworked by Vitaly Wool + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * Copyright (C) 2000 Deep Blue Solutions Ltd. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +/* We'll be using StrongARM sa1100 serial port major/minor */ +#define SERIAL_PNX8XXX_MAJOR 204 +#define MINOR_START 5 + +#define NR_PORTS 2 + +#define PNX8XXX_ISR_PASS_LIMIT 256 + +/* + * Convert from ignore_status_mask or read_status_mask to FIFO + * and interrupt status bits + */ +#define SM_TO_FIFO(x) ((x) >> 10) +#define SM_TO_ISTAT(x) ((x) & 0x000001ff) +#define FIFO_TO_SM(x) ((x) << 10) +#define ISTAT_TO_SM(x) ((x) & 0x000001ff) + +/* + * This is the size of our serial port register set. + */ +#define UART_PORT_SIZE 0x1000 + +/* + * This determines how often we check the modem status signals + * for any change. They generally aren't connected to an IRQ + * so we have to poll them. We also check immediately before + * filling the TX fifo incase CTS has been dropped. + */ +#define MCTRL_TIMEOUT (250*HZ/1000) + +extern struct pnx8xxx_port pnx8xxx_ports[]; + +static inline int serial_in(struct pnx8xxx_port *sport, int offset) +{ + return (__raw_readl(sport->port.membase + offset)); +} + +static inline void serial_out(struct pnx8xxx_port *sport, int offset, int value) +{ + __raw_writel(value, sport->port.membase + offset); +} + +/* + * Handle any change of modem status signal since we were last called. + */ +static void pnx8xxx_mctrl_check(struct pnx8xxx_port *sport) +{ + unsigned int status, changed; + + status = sport->port.ops->get_mctrl(&sport->port); + changed = status ^ sport->old_status; + + if (changed == 0) + return; + + sport->old_status = status; + + if (changed & TIOCM_RI) + sport->port.icount.rng++; + if (changed & TIOCM_DSR) + sport->port.icount.dsr++; + if (changed & TIOCM_CAR) + uart_handle_dcd_change(&sport->port, status & TIOCM_CAR); + if (changed & TIOCM_CTS) + uart_handle_cts_change(&sport->port, status & TIOCM_CTS); + + wake_up_interruptible(&sport->port.state->port.delta_msr_wait); +} + +/* + * This is our per-port timeout handler, for checking the + * modem status signals. + */ +static void pnx8xxx_timeout(struct timer_list *t) +{ + struct pnx8xxx_port *sport = from_timer(sport, t, timer); + unsigned long flags; + + if (sport->port.state) { + spin_lock_irqsave(&sport->port.lock, flags); + pnx8xxx_mctrl_check(sport); + spin_unlock_irqrestore(&sport->port.lock, flags); + + mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT); + } +} + +/* + * interrupts disabled on entry + */ +static void pnx8xxx_stop_tx(struct uart_port *port) +{ + struct pnx8xxx_port *sport = + container_of(port, struct pnx8xxx_port, port); + u32 ien; + + /* Disable TX intr */ + ien = serial_in(sport, PNX8XXX_IEN); + serial_out(sport, PNX8XXX_IEN, ien & ~PNX8XXX_UART_INT_ALLTX); + + /* Clear all pending TX intr */ + serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLTX); +} + +/* + * interrupts may not be disabled on entry + */ +static void pnx8xxx_start_tx(struct uart_port *port) +{ + struct pnx8xxx_port *sport = + container_of(port, struct pnx8xxx_port, port); + u32 ien; + + /* Clear all pending TX intr */ + serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLTX); + + /* Enable TX intr */ + ien = serial_in(sport, PNX8XXX_IEN); + serial_out(sport, PNX8XXX_IEN, ien | PNX8XXX_UART_INT_ALLTX); +} + +/* + * Interrupts enabled + */ +static void pnx8xxx_stop_rx(struct uart_port *port) +{ + struct pnx8xxx_port *sport = + container_of(port, struct pnx8xxx_port, port); + u32 ien; + + /* Disable RX intr */ + ien = serial_in(sport, PNX8XXX_IEN); + serial_out(sport, PNX8XXX_IEN, ien & ~PNX8XXX_UART_INT_ALLRX); + + /* Clear all pending RX intr */ + serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLRX); +} + +/* + * Set the modem control timer to fire immediately. + */ +static void pnx8xxx_enable_ms(struct uart_port *port) +{ + struct pnx8xxx_port *sport = + container_of(port, struct pnx8xxx_port, port); + + mod_timer(&sport->timer, jiffies); +} + +static void pnx8xxx_rx_chars(struct pnx8xxx_port *sport) +{ + unsigned int status, ch, flg; + + status = FIFO_TO_SM(serial_in(sport, PNX8XXX_FIFO)) | + ISTAT_TO_SM(serial_in(sport, PNX8XXX_ISTAT)); + while (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFIFO)) { + ch = serial_in(sport, PNX8XXX_FIFO) & 0xff; + + sport->port.icount.rx++; + + flg = TTY_NORMAL; + + /* + * note that the error handling code is + * out of the main execution path + */ + if (status & (FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE | + PNX8XXX_UART_FIFO_RXPAR | + PNX8XXX_UART_FIFO_RXBRK) | + ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN))) { + if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXBRK)) { + status &= ~(FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) | + FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR)); + sport->port.icount.brk++; + if (uart_handle_break(&sport->port)) + goto ignore_char; + } else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR)) + sport->port.icount.parity++; + else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE)) + sport->port.icount.frame++; + if (status & ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN)) + sport->port.icount.overrun++; + + status &= sport->port.read_status_mask; + + if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR)) + flg = TTY_PARITY; + else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE)) + flg = TTY_FRAME; + + sport->port.sysrq = 0; + } + + if (uart_handle_sysrq_char(&sport->port, ch)) + goto ignore_char; + + uart_insert_char(&sport->port, status, + ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN), ch, flg); + + ignore_char: + serial_out(sport, PNX8XXX_LCR, serial_in(sport, PNX8XXX_LCR) | + PNX8XXX_UART_LCR_RX_NEXT); + status = FIFO_TO_SM(serial_in(sport, PNX8XXX_FIFO)) | + ISTAT_TO_SM(serial_in(sport, PNX8XXX_ISTAT)); + } + + spin_unlock(&sport->port.lock); + tty_flip_buffer_push(&sport->port.state->port); + spin_lock(&sport->port.lock); +} + +static void pnx8xxx_tx_chars(struct pnx8xxx_port *sport) +{ + struct circ_buf *xmit = &sport->port.state->xmit; + + if (sport->port.x_char) { + serial_out(sport, PNX8XXX_FIFO, sport->port.x_char); + sport->port.icount.tx++; + sport->port.x_char = 0; + return; + } + + /* + * Check the modem control lines before + * transmitting anything. + */ + pnx8xxx_mctrl_check(sport); + + if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) { + pnx8xxx_stop_tx(&sport->port); + return; + } + + /* + * TX while bytes available + */ + while (((serial_in(sport, PNX8XXX_FIFO) & + PNX8XXX_UART_FIFO_TXFIFO) >> 16) < 16) { + serial_out(sport, PNX8XXX_FIFO, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + sport->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&sport->port); + + if (uart_circ_empty(xmit)) + pnx8xxx_stop_tx(&sport->port); +} + +static irqreturn_t pnx8xxx_int(int irq, void *dev_id) +{ + struct pnx8xxx_port *sport = dev_id; + unsigned int status; + + spin_lock(&sport->port.lock); + /* Get the interrupts */ + status = serial_in(sport, PNX8XXX_ISTAT) & serial_in(sport, PNX8XXX_IEN); + + /* Byte or break signal received */ + if (status & (PNX8XXX_UART_INT_RX | PNX8XXX_UART_INT_BREAK)) + pnx8xxx_rx_chars(sport); + + /* TX holding register empty - transmit a byte */ + if (status & PNX8XXX_UART_INT_TX) + pnx8xxx_tx_chars(sport); + + /* Clear the ISTAT register */ + serial_out(sport, PNX8XXX_ICLR, status); + + spin_unlock(&sport->port.lock); + return IRQ_HANDLED; +} + +/* + * Return TIOCSER_TEMT when transmitter is not busy. + */ +static unsigned int pnx8xxx_tx_empty(struct uart_port *port) +{ + struct pnx8xxx_port *sport = + container_of(port, struct pnx8xxx_port, port); + + return serial_in(sport, PNX8XXX_FIFO) & PNX8XXX_UART_FIFO_TXFIFO_STA ? 0 : TIOCSER_TEMT; +} + +static unsigned int pnx8xxx_get_mctrl(struct uart_port *port) +{ + struct pnx8xxx_port *sport = + container_of(port, struct pnx8xxx_port, port); + unsigned int mctrl = TIOCM_DSR; + unsigned int msr; + + /* REVISIT */ + + msr = serial_in(sport, PNX8XXX_MCR); + + mctrl |= msr & PNX8XXX_UART_MCR_CTS ? TIOCM_CTS : 0; + mctrl |= msr & PNX8XXX_UART_MCR_DCD ? TIOCM_CAR : 0; + + return mctrl; +} + +static void pnx8xxx_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +#if 0 /* FIXME */ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + unsigned int msr; +#endif +} + +/* + * Interrupts always disabled. + */ +static void pnx8xxx_break_ctl(struct uart_port *port, int break_state) +{ + struct pnx8xxx_port *sport = + container_of(port, struct pnx8xxx_port, port); + unsigned long flags; + unsigned int lcr; + + spin_lock_irqsave(&sport->port.lock, flags); + lcr = serial_in(sport, PNX8XXX_LCR); + if (break_state == -1) + lcr |= PNX8XXX_UART_LCR_TXBREAK; + else + lcr &= ~PNX8XXX_UART_LCR_TXBREAK; + serial_out(sport, PNX8XXX_LCR, lcr); + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +static int pnx8xxx_startup(struct uart_port *port) +{ + struct pnx8xxx_port *sport = + container_of(port, struct pnx8xxx_port, port); + int retval; + + /* + * Allocate the IRQ + */ + retval = request_irq(sport->port.irq, pnx8xxx_int, 0, + "pnx8xxx-uart", sport); + if (retval) + return retval; + + /* + * Finally, clear and enable interrupts + */ + + serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLRX | + PNX8XXX_UART_INT_ALLTX); + + serial_out(sport, PNX8XXX_IEN, serial_in(sport, PNX8XXX_IEN) | + PNX8XXX_UART_INT_ALLRX | + PNX8XXX_UART_INT_ALLTX); + + /* + * Enable modem status interrupts + */ + spin_lock_irq(&sport->port.lock); + pnx8xxx_enable_ms(&sport->port); + spin_unlock_irq(&sport->port.lock); + + return 0; +} + +static void pnx8xxx_shutdown(struct uart_port *port) +{ + struct pnx8xxx_port *sport = + container_of(port, struct pnx8xxx_port, port); + int lcr; + + /* + * Stop our timer. + */ + del_timer_sync(&sport->timer); + + /* + * Disable all interrupts + */ + serial_out(sport, PNX8XXX_IEN, 0); + + /* + * Reset the Tx and Rx FIFOS, disable the break condition + */ + lcr = serial_in(sport, PNX8XXX_LCR); + lcr &= ~PNX8XXX_UART_LCR_TXBREAK; + lcr |= PNX8XXX_UART_LCR_TX_RST | PNX8XXX_UART_LCR_RX_RST; + serial_out(sport, PNX8XXX_LCR, lcr); + + /* + * Clear all interrupts + */ + serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLRX | + PNX8XXX_UART_INT_ALLTX); + + /* + * Free the interrupt + */ + free_irq(sport->port.irq, sport); +} + +static void +pnx8xxx_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct pnx8xxx_port *sport = + container_of(port, struct pnx8xxx_port, port); + unsigned long flags; + unsigned int lcr_fcr, old_ien, baud, quot; + unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; + + /* + * We only support CS7 and CS8. + */ + while ((termios->c_cflag & CSIZE) != CS7 && + (termios->c_cflag & CSIZE) != CS8) { + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= old_csize; + old_csize = CS8; + } + + if ((termios->c_cflag & CSIZE) == CS8) + lcr_fcr = PNX8XXX_UART_LCR_8BIT; + else + lcr_fcr = 0; + + if (termios->c_cflag & CSTOPB) + lcr_fcr |= PNX8XXX_UART_LCR_2STOPB; + if (termios->c_cflag & PARENB) { + lcr_fcr |= PNX8XXX_UART_LCR_PAREN; + if (!(termios->c_cflag & PARODD)) + lcr_fcr |= PNX8XXX_UART_LCR_PAREVN; + } + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + + spin_lock_irqsave(&sport->port.lock, flags); + + sport->port.read_status_mask = ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN) | + ISTAT_TO_SM(PNX8XXX_UART_INT_EMPTY) | + ISTAT_TO_SM(PNX8XXX_UART_INT_RX); + if (termios->c_iflag & INPCK) + sport->port.read_status_mask |= + FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) | + FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR); + if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) + sport->port.read_status_mask |= + ISTAT_TO_SM(PNX8XXX_UART_INT_BREAK); + + /* + * Characters to ignore + */ + sport->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + sport->port.ignore_status_mask |= + FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) | + FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR); + if (termios->c_iflag & IGNBRK) { + sport->port.ignore_status_mask |= + ISTAT_TO_SM(PNX8XXX_UART_INT_BREAK); + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + sport->port.ignore_status_mask |= + ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN); + } + + /* + * ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + sport->port.ignore_status_mask |= + ISTAT_TO_SM(PNX8XXX_UART_INT_RX); + + del_timer_sync(&sport->timer); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + /* + * disable interrupts and drain transmitter + */ + old_ien = serial_in(sport, PNX8XXX_IEN); + serial_out(sport, PNX8XXX_IEN, old_ien & ~(PNX8XXX_UART_INT_ALLTX | + PNX8XXX_UART_INT_ALLRX)); + + while (serial_in(sport, PNX8XXX_FIFO) & PNX8XXX_UART_FIFO_TXFIFO_STA) + barrier(); + + /* then, disable everything */ + serial_out(sport, PNX8XXX_IEN, 0); + + /* Reset the Rx and Tx FIFOs too */ + lcr_fcr |= PNX8XXX_UART_LCR_TX_RST; + lcr_fcr |= PNX8XXX_UART_LCR_RX_RST; + + /* set the parity, stop bits and data size */ + serial_out(sport, PNX8XXX_LCR, lcr_fcr); + + /* set the baud rate */ + quot -= 1; + serial_out(sport, PNX8XXX_BAUD, quot); + + serial_out(sport, PNX8XXX_ICLR, -1); + + serial_out(sport, PNX8XXX_IEN, old_ien); + + if (UART_ENABLE_MS(&sport->port, termios->c_cflag)) + pnx8xxx_enable_ms(&sport->port); + + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +static const char *pnx8xxx_type(struct uart_port *port) +{ + struct pnx8xxx_port *sport = + container_of(port, struct pnx8xxx_port, port); + + return sport->port.type == PORT_PNX8XXX ? "PNX8XXX" : NULL; +} + +/* + * Release the memory region(s) being used by 'port'. + */ +static void pnx8xxx_release_port(struct uart_port *port) +{ + struct pnx8xxx_port *sport = + container_of(port, struct pnx8xxx_port, port); + + release_mem_region(sport->port.mapbase, UART_PORT_SIZE); +} + +/* + * Request the memory region(s) being used by 'port'. + */ +static int pnx8xxx_request_port(struct uart_port *port) +{ + struct pnx8xxx_port *sport = + container_of(port, struct pnx8xxx_port, port); + return request_mem_region(sport->port.mapbase, UART_PORT_SIZE, + "pnx8xxx-uart") != NULL ? 0 : -EBUSY; +} + +/* + * Configure/autoconfigure the port. + */ +static void pnx8xxx_config_port(struct uart_port *port, int flags) +{ + struct pnx8xxx_port *sport = + container_of(port, struct pnx8xxx_port, port); + + if (flags & UART_CONFIG_TYPE && + pnx8xxx_request_port(&sport->port) == 0) + sport->port.type = PORT_PNX8XXX; +} + +/* + * Verify the new serial_struct (for TIOCSSERIAL). + * The only change we allow are to the flags and type, and + * even then only between PORT_PNX8XXX and PORT_UNKNOWN + */ +static int +pnx8xxx_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + struct pnx8xxx_port *sport = + container_of(port, struct pnx8xxx_port, port); + int ret = 0; + + if (ser->type != PORT_UNKNOWN && ser->type != PORT_PNX8XXX) + ret = -EINVAL; + if (sport->port.irq != ser->irq) + ret = -EINVAL; + if (ser->io_type != SERIAL_IO_MEM) + ret = -EINVAL; + if (sport->port.uartclk / 16 != ser->baud_base) + ret = -EINVAL; + if ((void *)sport->port.mapbase != ser->iomem_base) + ret = -EINVAL; + if (sport->port.iobase != ser->port) + ret = -EINVAL; + if (ser->hub6 != 0) + ret = -EINVAL; + return ret; +} + +static const struct uart_ops pnx8xxx_pops = { + .tx_empty = pnx8xxx_tx_empty, + .set_mctrl = pnx8xxx_set_mctrl, + .get_mctrl = pnx8xxx_get_mctrl, + .stop_tx = pnx8xxx_stop_tx, + .start_tx = pnx8xxx_start_tx, + .stop_rx = pnx8xxx_stop_rx, + .enable_ms = pnx8xxx_enable_ms, + .break_ctl = pnx8xxx_break_ctl, + .startup = pnx8xxx_startup, + .shutdown = pnx8xxx_shutdown, + .set_termios = pnx8xxx_set_termios, + .type = pnx8xxx_type, + .release_port = pnx8xxx_release_port, + .request_port = pnx8xxx_request_port, + .config_port = pnx8xxx_config_port, + .verify_port = pnx8xxx_verify_port, +}; + + +/* + * Setup the PNX8XXX serial ports. + * + * Note also that we support "console=ttySx" where "x" is either 0 or 1. + */ +static void __init pnx8xxx_init_ports(void) +{ + static int first = 1; + int i; + + if (!first) + return; + first = 0; + + for (i = 0; i < NR_PORTS; i++) { + timer_setup(&pnx8xxx_ports[i].timer, pnx8xxx_timeout, 0); + pnx8xxx_ports[i].port.ops = &pnx8xxx_pops; + } +} + +#ifdef CONFIG_SERIAL_PNX8XXX_CONSOLE + +static void pnx8xxx_console_putchar(struct uart_port *port, int ch) +{ + struct pnx8xxx_port *sport = + container_of(port, struct pnx8xxx_port, port); + int status; + + do { + /* Wait for UART_TX register to empty */ + status = serial_in(sport, PNX8XXX_FIFO); + } while (status & PNX8XXX_UART_FIFO_TXFIFO); + serial_out(sport, PNX8XXX_FIFO, ch); +} + +/* + * Interrupts are disabled on entering + */static void +pnx8xxx_console_write(struct console *co, const char *s, unsigned int count) +{ + struct pnx8xxx_port *sport = &pnx8xxx_ports[co->index]; + unsigned int old_ien, status; + + /* + * First, save IEN and then disable interrupts + */ + old_ien = serial_in(sport, PNX8XXX_IEN); + serial_out(sport, PNX8XXX_IEN, old_ien & ~(PNX8XXX_UART_INT_ALLTX | + PNX8XXX_UART_INT_ALLRX)); + + uart_console_write(&sport->port, s, count, pnx8xxx_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore IEN + */ + do { + /* Wait for UART_TX register to empty */ + status = serial_in(sport, PNX8XXX_FIFO); + } while (status & PNX8XXX_UART_FIFO_TXFIFO); + + /* Clear TX and EMPTY interrupt */ + serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_TX | + PNX8XXX_UART_INT_EMPTY); + + serial_out(sport, PNX8XXX_IEN, old_ien); +} + +static int __init +pnx8xxx_console_setup(struct console *co, char *options) +{ + struct pnx8xxx_port *sport; + int baud = 38400; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index == -1 || co->index >= NR_PORTS) + co->index = 0; + sport = &pnx8xxx_ports[co->index]; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&sport->port, co, baud, parity, bits, flow); +} + +static struct uart_driver pnx8xxx_reg; +static struct console pnx8xxx_console = { + .name = "ttyS", + .write = pnx8xxx_console_write, + .device = uart_console_device, + .setup = pnx8xxx_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &pnx8xxx_reg, +}; + +static int __init pnx8xxx_rs_console_init(void) +{ + pnx8xxx_init_ports(); + register_console(&pnx8xxx_console); + return 0; +} +console_initcall(pnx8xxx_rs_console_init); + +#define PNX8XXX_CONSOLE &pnx8xxx_console +#else +#define PNX8XXX_CONSOLE NULL +#endif + +static struct uart_driver pnx8xxx_reg = { + .owner = THIS_MODULE, + .driver_name = "ttyS", + .dev_name = "ttyS", + .major = SERIAL_PNX8XXX_MAJOR, + .minor = MINOR_START, + .nr = NR_PORTS, + .cons = PNX8XXX_CONSOLE, +}; + +static int pnx8xxx_serial_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct pnx8xxx_port *sport = platform_get_drvdata(pdev); + + return uart_suspend_port(&pnx8xxx_reg, &sport->port); +} + +static int pnx8xxx_serial_resume(struct platform_device *pdev) +{ + struct pnx8xxx_port *sport = platform_get_drvdata(pdev); + + return uart_resume_port(&pnx8xxx_reg, &sport->port); +} + +static int pnx8xxx_serial_probe(struct platform_device *pdev) +{ + struct resource *res = pdev->resource; + int i; + + for (i = 0; i < pdev->num_resources; i++, res++) { + if (!(res->flags & IORESOURCE_MEM)) + continue; + + for (i = 0; i < NR_PORTS; i++) { + if (pnx8xxx_ports[i].port.mapbase != res->start) + continue; + + pnx8xxx_ports[i].port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_PNX8XXX_CONSOLE); + pnx8xxx_ports[i].port.dev = &pdev->dev; + uart_add_one_port(&pnx8xxx_reg, &pnx8xxx_ports[i].port); + platform_set_drvdata(pdev, &pnx8xxx_ports[i]); + break; + } + } + + return 0; +} + +static int pnx8xxx_serial_remove(struct platform_device *pdev) +{ + struct pnx8xxx_port *sport = platform_get_drvdata(pdev); + + if (sport) + uart_remove_one_port(&pnx8xxx_reg, &sport->port); + + return 0; +} + +static struct platform_driver pnx8xxx_serial_driver = { + .driver = { + .name = "pnx8xxx-uart", + }, + .probe = pnx8xxx_serial_probe, + .remove = pnx8xxx_serial_remove, + .suspend = pnx8xxx_serial_suspend, + .resume = pnx8xxx_serial_resume, +}; + +static int __init pnx8xxx_serial_init(void) +{ + int ret; + + printk(KERN_INFO "Serial: PNX8XXX driver\n"); + + pnx8xxx_init_ports(); + + ret = uart_register_driver(&pnx8xxx_reg); + if (ret == 0) { + ret = platform_driver_register(&pnx8xxx_serial_driver); + if (ret) + uart_unregister_driver(&pnx8xxx_reg); + } + return ret; +} + +static void __exit pnx8xxx_serial_exit(void) +{ + platform_driver_unregister(&pnx8xxx_serial_driver); + uart_unregister_driver(&pnx8xxx_reg); +} + +module_init(pnx8xxx_serial_init); +module_exit(pnx8xxx_serial_exit); + +MODULE_AUTHOR("Embedded Alley Solutions, Inc."); +MODULE_DESCRIPTION("PNX8XXX SoCs serial port driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_PNX8XXX_MAJOR); +MODULE_ALIAS("platform:pnx8xxx-uart"); diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c new file mode 100644 index 000000000..41319ef96 --- /dev/null +++ b/drivers/tty/serial/pxa.c @@ -0,0 +1,942 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Based on drivers/serial/8250.c by Russell King. + * + * Author: Nicolas Pitre + * Created: Feb 20, 2003 + * Copyright: (C) 2003 Monta Vista Software, Inc. + * + * Note 1: This driver is made separate from the already too overloaded + * 8250.c because it needs some kirks of its own and that'll make it + * easier to add DMA support. + * + * Note 2: I'm too sick of device allocation policies for serial ports. + * If someone else wants to request an "official" allocation of major/minor + * for this driver please be my guest. And don't forget that new hardware + * to come from Intel might have more than 3 or 4 of those UARTs. Let's + * hope for a better port registration and dynamic device allocation scheme + * with the serial core maintainer satisfaction to appear soon. + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define PXA_NAME_LEN 8 + +struct uart_pxa_port { + struct uart_port port; + unsigned char ier; + unsigned char lcr; + unsigned char mcr; + unsigned int lsr_break_flag; + struct clk *clk; + char name[PXA_NAME_LEN]; +}; + +static inline unsigned int serial_in(struct uart_pxa_port *up, int offset) +{ + offset <<= 2; + return readl(up->port.membase + offset); +} + +static inline void serial_out(struct uart_pxa_port *up, int offset, int value) +{ + offset <<= 2; + writel(value, up->port.membase + offset); +} + +static void serial_pxa_enable_ms(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + + up->ier |= UART_IER_MSI; + serial_out(up, UART_IER, up->ier); +} + +static void serial_pxa_stop_tx(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + + if (up->ier & UART_IER_THRI) { + up->ier &= ~UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } +} + +static void serial_pxa_stop_rx(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + + up->ier &= ~UART_IER_RLSI; + up->port.read_status_mask &= ~UART_LSR_DR; + serial_out(up, UART_IER, up->ier); +} + +static inline void receive_chars(struct uart_pxa_port *up, int *status) +{ + unsigned int ch, flag; + int max_count = 256; + + do { + /* work around Errata #20 according to + * Intel(R) PXA27x Processor Family + * Specification Update (May 2005) + * + * Step 2 + * Disable the Reciever Time Out Interrupt via IER[RTOEI] + */ + up->ier &= ~UART_IER_RTOIE; + serial_out(up, UART_IER, up->ier); + + ch = serial_in(up, UART_RX); + flag = TTY_NORMAL; + up->port.icount.rx++; + + if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE | + UART_LSR_FE | UART_LSR_OE))) { + /* + * For statistics only + */ + if (*status & UART_LSR_BI) { + *status &= ~(UART_LSR_FE | UART_LSR_PE); + up->port.icount.brk++; + /* + * We do the SysRQ and SAK checking + * here because otherwise the break + * may get masked by ignore_status_mask + * or read_status_mask. + */ + if (uart_handle_break(&up->port)) + goto ignore_char; + } else if (*status & UART_LSR_PE) + up->port.icount.parity++; + else if (*status & UART_LSR_FE) + up->port.icount.frame++; + if (*status & UART_LSR_OE) + up->port.icount.overrun++; + + /* + * Mask off conditions which should be ignored. + */ + *status &= up->port.read_status_mask; + +#ifdef CONFIG_SERIAL_PXA_CONSOLE + if (up->port.line == up->port.cons->index) { + /* Recover the break flag from console xmit */ + *status |= up->lsr_break_flag; + up->lsr_break_flag = 0; + } +#endif + if (*status & UART_LSR_BI) { + flag = TTY_BREAK; + } else if (*status & UART_LSR_PE) + flag = TTY_PARITY; + else if (*status & UART_LSR_FE) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(&up->port, ch)) + goto ignore_char; + + uart_insert_char(&up->port, *status, UART_LSR_OE, ch, flag); + + ignore_char: + *status = serial_in(up, UART_LSR); + } while ((*status & UART_LSR_DR) && (max_count-- > 0)); + tty_flip_buffer_push(&up->port.state->port); + + /* work around Errata #20 according to + * Intel(R) PXA27x Processor Family + * Specification Update (May 2005) + * + * Step 6: + * No more data in FIFO: Re-enable RTO interrupt via IER[RTOIE] + */ + up->ier |= UART_IER_RTOIE; + serial_out(up, UART_IER, up->ier); +} + +static void transmit_chars(struct uart_pxa_port *up) +{ + struct circ_buf *xmit = &up->port.state->xmit; + int count; + + if (up->port.x_char) { + serial_out(up, UART_TX, up->port.x_char); + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { + serial_pxa_stop_tx(&up->port); + return; + } + + count = up->port.fifosize / 2; + do { + serial_out(up, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + + if (uart_circ_empty(xmit)) + serial_pxa_stop_tx(&up->port); +} + +static void serial_pxa_start_tx(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + + if (!(up->ier & UART_IER_THRI)) { + up->ier |= UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } +} + +/* should hold up->port.lock */ +static inline void check_modem_status(struct uart_pxa_port *up) +{ + int status; + + status = serial_in(up, UART_MSR); + + if ((status & UART_MSR_ANY_DELTA) == 0) + return; + + if (status & UART_MSR_TERI) + up->port.icount.rng++; + if (status & UART_MSR_DDSR) + up->port.icount.dsr++; + if (status & UART_MSR_DDCD) + uart_handle_dcd_change(&up->port, status & UART_MSR_DCD); + if (status & UART_MSR_DCTS) + uart_handle_cts_change(&up->port, status & UART_MSR_CTS); + + wake_up_interruptible(&up->port.state->port.delta_msr_wait); +} + +/* + * This handles the interrupt from one port. + */ +static inline irqreturn_t serial_pxa_irq(int irq, void *dev_id) +{ + struct uart_pxa_port *up = dev_id; + unsigned int iir, lsr; + + iir = serial_in(up, UART_IIR); + if (iir & UART_IIR_NO_INT) + return IRQ_NONE; + spin_lock(&up->port.lock); + lsr = serial_in(up, UART_LSR); + if (lsr & UART_LSR_DR) + receive_chars(up, &lsr); + check_modem_status(up); + if (lsr & UART_LSR_THRE) + transmit_chars(up); + spin_unlock(&up->port.lock); + return IRQ_HANDLED; +} + +static unsigned int serial_pxa_tx_empty(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + unsigned long flags; + unsigned int ret; + + spin_lock_irqsave(&up->port.lock, flags); + ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; + spin_unlock_irqrestore(&up->port.lock, flags); + + return ret; +} + +static unsigned int serial_pxa_get_mctrl(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + unsigned char status; + unsigned int ret; + + status = serial_in(up, UART_MSR); + + ret = 0; + if (status & UART_MSR_DCD) + ret |= TIOCM_CAR; + if (status & UART_MSR_RI) + ret |= TIOCM_RNG; + if (status & UART_MSR_DSR) + ret |= TIOCM_DSR; + if (status & UART_MSR_CTS) + ret |= TIOCM_CTS; + return ret; +} + +static void serial_pxa_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + unsigned char mcr = 0; + + if (mctrl & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (mctrl & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (mctrl & TIOCM_OUT1) + mcr |= UART_MCR_OUT1; + if (mctrl & TIOCM_OUT2) + mcr |= UART_MCR_OUT2; + if (mctrl & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + mcr |= up->mcr; + + serial_out(up, UART_MCR, mcr); +} + +static void serial_pxa_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + if (break_state == -1) + up->lcr |= UART_LCR_SBC; + else + up->lcr &= ~UART_LCR_SBC; + serial_out(up, UART_LCR, up->lcr); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static int serial_pxa_startup(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + unsigned long flags; + int retval; + + if (port->line == 3) /* HWUART */ + up->mcr |= UART_MCR_AFE; + else + up->mcr = 0; + + up->port.uartclk = clk_get_rate(up->clk); + + /* + * Allocate the IRQ + */ + retval = request_irq(up->port.irq, serial_pxa_irq, 0, up->name, up); + if (retval) + return retval; + + /* + * Clear the FIFO buffers and disable them. + * (they will be reenabled in set_termios()) + */ + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + serial_out(up, UART_FCR, 0); + + /* + * Clear the interrupt registers. + */ + (void) serial_in(up, UART_LSR); + (void) serial_in(up, UART_RX); + (void) serial_in(up, UART_IIR); + (void) serial_in(up, UART_MSR); + + /* + * Now, initialize the UART + */ + serial_out(up, UART_LCR, UART_LCR_WLEN8); + + spin_lock_irqsave(&up->port.lock, flags); + up->port.mctrl |= TIOCM_OUT2; + serial_pxa_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * Finally, enable interrupts. Note: Modem status interrupts + * are set via set_termios(), which will be occurring imminently + * anyway, so we don't enable them here. + */ + up->ier = UART_IER_RLSI | UART_IER_RDI | UART_IER_RTOIE | UART_IER_UUE; + serial_out(up, UART_IER, up->ier); + + /* + * And clear the interrupt registers again for luck. + */ + (void) serial_in(up, UART_LSR); + (void) serial_in(up, UART_RX); + (void) serial_in(up, UART_IIR); + (void) serial_in(up, UART_MSR); + + return 0; +} + +static void serial_pxa_shutdown(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + unsigned long flags; + + free_irq(up->port.irq, up); + + /* + * Disable interrupts from this port + */ + up->ier = 0; + serial_out(up, UART_IER, 0); + + spin_lock_irqsave(&up->port.lock, flags); + up->port.mctrl &= ~TIOCM_OUT2; + serial_pxa_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * Disable break condition and FIFOs + */ + serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC); + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | + UART_FCR_CLEAR_XMIT); + serial_out(up, UART_FCR, 0); +} + +static void +serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + unsigned char cval, fcr = 0; + unsigned long flags; + unsigned int baud, quot; + unsigned int dll; + + switch (termios->c_cflag & CSIZE) { + case CS5: + cval = UART_LCR_WLEN5; + break; + case CS6: + cval = UART_LCR_WLEN6; + break; + case CS7: + cval = UART_LCR_WLEN7; + break; + default: + case CS8: + cval = UART_LCR_WLEN8; + break; + } + + if (termios->c_cflag & CSTOPB) + cval |= UART_LCR_STOP; + if (termios->c_cflag & PARENB) + cval |= UART_LCR_PARITY; + if (!(termios->c_cflag & PARODD)) + cval |= UART_LCR_EPAR; + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + + if ((up->port.uartclk / quot) < (2400 * 16)) + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR1; + else if ((up->port.uartclk / quot) < (230400 * 16)) + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR8; + else + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR32; + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + spin_lock_irqsave(&up->port.lock, flags); + + /* + * Ensure the port will be enabled. + * This is required especially for serial console. + */ + up->ier |= UART_IER_UUE; + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + if (termios->c_iflag & INPCK) + up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) + up->port.read_status_mask |= UART_LSR_BI; + + /* + * Characters to ignore + */ + up->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; + if (termios->c_iflag & IGNBRK) { + up->port.ignore_status_mask |= UART_LSR_BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_OE; + } + + /* + * ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + up->port.ignore_status_mask |= UART_LSR_DR; + + /* + * CTS flow control flag and modem status interrupts + */ + up->ier &= ~UART_IER_MSI; + if (UART_ENABLE_MS(&up->port, termios->c_cflag)) + up->ier |= UART_IER_MSI; + + serial_out(up, UART_IER, up->ier); + + if (termios->c_cflag & CRTSCTS) + up->mcr |= UART_MCR_AFE; + else + up->mcr &= ~UART_MCR_AFE; + + serial_out(up, UART_LCR, cval | UART_LCR_DLAB); /* set DLAB */ + serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */ + + /* + * work around Errata #75 according to Intel(R) PXA27x Processor Family + * Specification Update (Nov 2005) + */ + dll = serial_in(up, UART_DLL); + WARN_ON(dll != (quot & 0xff)); + + serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */ + serial_out(up, UART_LCR, cval); /* reset DLAB */ + up->lcr = cval; /* Save LCR */ + serial_pxa_set_mctrl(&up->port, up->port.mctrl); + serial_out(up, UART_FCR, fcr); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static void +serial_pxa_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + + if (!state) + clk_prepare_enable(up->clk); + else + clk_disable_unprepare(up->clk); +} + +static void serial_pxa_release_port(struct uart_port *port) +{ +} + +static int serial_pxa_request_port(struct uart_port *port) +{ + return 0; +} + +static void serial_pxa_config_port(struct uart_port *port, int flags) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + up->port.type = PORT_PXA; +} + +static int +serial_pxa_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + /* we don't want the core code to modify any port params */ + return -EINVAL; +} + +static const char * +serial_pxa_type(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + return up->name; +} + +static struct uart_pxa_port *serial_pxa_ports[4]; +static struct uart_driver serial_pxa_reg; + +#ifdef CONFIG_SERIAL_PXA_CONSOLE + +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +/* + * Wait for transmitter & holding register to empty + */ +static void wait_for_xmitr(struct uart_pxa_port *up) +{ + unsigned int status, tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + do { + status = serial_in(up, UART_LSR); + + if (status & UART_LSR_BI) + up->lsr_break_flag = UART_LSR_BI; + + if (--tmout == 0) + break; + udelay(1); + } while ((status & BOTH_EMPTY) != BOTH_EMPTY); + + /* Wait up to 1s for flow control if necessary */ + if (up->port.flags & UPF_CONS_FLOW) { + tmout = 1000000; + while (--tmout && + ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0)) + udelay(1); + } +} + +static void serial_pxa_console_putchar(struct uart_port *port, int ch) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + + wait_for_xmitr(up); + serial_out(up, UART_TX, ch); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console_lock must be held when we get here. + */ +static void +serial_pxa_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_pxa_port *up = serial_pxa_ports[co->index]; + unsigned int ier; + unsigned long flags; + int locked = 1; + + clk_enable(up->clk); + local_irq_save(flags); + if (up->port.sysrq) + locked = 0; + else if (oops_in_progress) + locked = spin_trylock(&up->port.lock); + else + spin_lock(&up->port.lock); + + /* + * First save the IER then disable the interrupts + */ + ier = serial_in(up, UART_IER); + serial_out(up, UART_IER, UART_IER_UUE); + + uart_console_write(&up->port, s, count, serial_pxa_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up); + serial_out(up, UART_IER, ier); + + if (locked) + spin_unlock(&up->port.lock); + local_irq_restore(flags); + clk_disable(up->clk); + +} + +#ifdef CONFIG_CONSOLE_POLL +/* + * Console polling routines for writing and reading from the uart while + * in an interrupt or debug context. + */ + +static int serial_pxa_get_poll_char(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + unsigned char lsr = serial_in(up, UART_LSR); + + while (!(lsr & UART_LSR_DR)) + lsr = serial_in(up, UART_LSR); + + return serial_in(up, UART_RX); +} + + +static void serial_pxa_put_poll_char(struct uart_port *port, + unsigned char c) +{ + unsigned int ier; + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + + /* + * First save the IER then disable the interrupts + */ + ier = serial_in(up, UART_IER); + serial_out(up, UART_IER, UART_IER_UUE); + + wait_for_xmitr(up); + /* + * Send the character out. + */ + serial_out(up, UART_TX, c); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up); + serial_out(up, UART_IER, ier); +} + +#endif /* CONFIG_CONSOLE_POLL */ + +static int __init +serial_pxa_console_setup(struct console *co, char *options) +{ + struct uart_pxa_port *up; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index == -1 || co->index >= serial_pxa_reg.nr) + co->index = 0; + up = serial_pxa_ports[co->index]; + if (!up) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&up->port, co, baud, parity, bits, flow); +} + +static struct console serial_pxa_console = { + .name = "ttyS", + .write = serial_pxa_console_write, + .device = uart_console_device, + .setup = serial_pxa_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &serial_pxa_reg, +}; + +#define PXA_CONSOLE &serial_pxa_console +#else +#define PXA_CONSOLE NULL +#endif + +static const struct uart_ops serial_pxa_pops = { + .tx_empty = serial_pxa_tx_empty, + .set_mctrl = serial_pxa_set_mctrl, + .get_mctrl = serial_pxa_get_mctrl, + .stop_tx = serial_pxa_stop_tx, + .start_tx = serial_pxa_start_tx, + .stop_rx = serial_pxa_stop_rx, + .enable_ms = serial_pxa_enable_ms, + .break_ctl = serial_pxa_break_ctl, + .startup = serial_pxa_startup, + .shutdown = serial_pxa_shutdown, + .set_termios = serial_pxa_set_termios, + .pm = serial_pxa_pm, + .type = serial_pxa_type, + .release_port = serial_pxa_release_port, + .request_port = serial_pxa_request_port, + .config_port = serial_pxa_config_port, + .verify_port = serial_pxa_verify_port, +#if defined(CONFIG_CONSOLE_POLL) && defined(CONFIG_SERIAL_PXA_CONSOLE) + .poll_get_char = serial_pxa_get_poll_char, + .poll_put_char = serial_pxa_put_poll_char, +#endif +}; + +static struct uart_driver serial_pxa_reg = { + .owner = THIS_MODULE, + .driver_name = "PXA serial", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .nr = 4, + .cons = PXA_CONSOLE, +}; + +#ifdef CONFIG_PM +static int serial_pxa_suspend(struct device *dev) +{ + struct uart_pxa_port *sport = dev_get_drvdata(dev); + + if (sport) + uart_suspend_port(&serial_pxa_reg, &sport->port); + + return 0; +} + +static int serial_pxa_resume(struct device *dev) +{ + struct uart_pxa_port *sport = dev_get_drvdata(dev); + + if (sport) + uart_resume_port(&serial_pxa_reg, &sport->port); + + return 0; +} + +static const struct dev_pm_ops serial_pxa_pm_ops = { + .suspend = serial_pxa_suspend, + .resume = serial_pxa_resume, +}; +#endif + +static const struct of_device_id serial_pxa_dt_ids[] = { + { .compatible = "mrvl,pxa-uart", }, + { .compatible = "mrvl,mmp-uart", }, + {} +}; + +static int serial_pxa_probe_dt(struct platform_device *pdev, + struct uart_pxa_port *sport) +{ + struct device_node *np = pdev->dev.of_node; + int ret; + + if (!np) + return 1; + + ret = of_alias_get_id(np, "serial"); + if (ret < 0) { + dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret); + return ret; + } + sport->port.line = ret; + return 0; +} + +static int serial_pxa_probe(struct platform_device *dev) +{ + struct uart_pxa_port *sport; + struct resource *mmres, *irqres; + int ret; + + mmres = platform_get_resource(dev, IORESOURCE_MEM, 0); + irqres = platform_get_resource(dev, IORESOURCE_IRQ, 0); + if (!mmres || !irqres) + return -ENODEV; + + sport = kzalloc(sizeof(struct uart_pxa_port), GFP_KERNEL); + if (!sport) + return -ENOMEM; + + sport->clk = clk_get(&dev->dev, NULL); + if (IS_ERR(sport->clk)) { + ret = PTR_ERR(sport->clk); + goto err_free; + } + + ret = clk_prepare(sport->clk); + if (ret) { + clk_put(sport->clk); + goto err_free; + } + + sport->port.type = PORT_PXA; + sport->port.iotype = UPIO_MEM; + sport->port.mapbase = mmres->start; + sport->port.irq = irqres->start; + sport->port.fifosize = 64; + sport->port.ops = &serial_pxa_pops; + sport->port.dev = &dev->dev; + sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; + sport->port.uartclk = clk_get_rate(sport->clk); + sport->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_PXA_CONSOLE); + + ret = serial_pxa_probe_dt(dev, sport); + if (ret > 0) + sport->port.line = dev->id; + else if (ret < 0) + goto err_clk; + if (sport->port.line >= ARRAY_SIZE(serial_pxa_ports)) { + dev_err(&dev->dev, "serial%d out of range\n", sport->port.line); + ret = -EINVAL; + goto err_clk; + } + snprintf(sport->name, PXA_NAME_LEN - 1, "UART%d", sport->port.line + 1); + + sport->port.membase = ioremap(mmres->start, resource_size(mmres)); + if (!sport->port.membase) { + ret = -ENOMEM; + goto err_clk; + } + + serial_pxa_ports[sport->port.line] = sport; + + uart_add_one_port(&serial_pxa_reg, &sport->port); + platform_set_drvdata(dev, sport); + + return 0; + + err_clk: + clk_unprepare(sport->clk); + clk_put(sport->clk); + err_free: + kfree(sport); + return ret; +} + +static struct platform_driver serial_pxa_driver = { + .probe = serial_pxa_probe, + + .driver = { + .name = "pxa2xx-uart", +#ifdef CONFIG_PM + .pm = &serial_pxa_pm_ops, +#endif + .suppress_bind_attrs = true, + .of_match_table = serial_pxa_dt_ids, + }, +}; + + +/* 8250 driver for PXA serial ports should be used */ +static int __init serial_pxa_init(void) +{ + int ret; + + ret = uart_register_driver(&serial_pxa_reg); + if (ret != 0) + return ret; + + ret = platform_driver_register(&serial_pxa_driver); + if (ret != 0) + uart_unregister_driver(&serial_pxa_reg); + + return ret; +} +device_initcall(serial_pxa_init); diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c new file mode 100644 index 000000000..7caba2336 --- /dev/null +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -0,0 +1,1595 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2017-2018, The Linux foundation. All rights reserved. + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* UART specific GENI registers */ +#define SE_UART_LOOPBACK_CFG 0x22c +#define SE_UART_IO_MACRO_CTRL 0x240 +#define SE_UART_TX_TRANS_CFG 0x25c +#define SE_UART_TX_WORD_LEN 0x268 +#define SE_UART_TX_STOP_BIT_LEN 0x26c +#define SE_UART_TX_TRANS_LEN 0x270 +#define SE_UART_RX_TRANS_CFG 0x280 +#define SE_UART_RX_WORD_LEN 0x28c +#define SE_UART_RX_STALE_CNT 0x294 +#define SE_UART_TX_PARITY_CFG 0x2a4 +#define SE_UART_RX_PARITY_CFG 0x2a8 +#define SE_UART_MANUAL_RFR 0x2ac + +/* SE_UART_TRANS_CFG */ +#define UART_TX_PAR_EN BIT(0) +#define UART_CTS_MASK BIT(1) + +/* SE_UART_TX_WORD_LEN */ +#define TX_WORD_LEN_MSK GENMASK(9, 0) + +/* SE_UART_TX_STOP_BIT_LEN */ +#define TX_STOP_BIT_LEN_MSK GENMASK(23, 0) +#define TX_STOP_BIT_LEN_1 0 +#define TX_STOP_BIT_LEN_1_5 1 +#define TX_STOP_BIT_LEN_2 2 + +/* SE_UART_TX_TRANS_LEN */ +#define TX_TRANS_LEN_MSK GENMASK(23, 0) + +/* SE_UART_RX_TRANS_CFG */ +#define UART_RX_INS_STATUS_BIT BIT(2) +#define UART_RX_PAR_EN BIT(3) + +/* SE_UART_RX_WORD_LEN */ +#define RX_WORD_LEN_MASK GENMASK(9, 0) + +/* SE_UART_RX_STALE_CNT */ +#define RX_STALE_CNT GENMASK(23, 0) + +/* SE_UART_TX_PARITY_CFG/RX_PARITY_CFG */ +#define PAR_CALC_EN BIT(0) +#define PAR_MODE_MSK GENMASK(2, 1) +#define PAR_MODE_SHFT 1 +#define PAR_EVEN 0x00 +#define PAR_ODD 0x01 +#define PAR_SPACE 0x10 +#define PAR_MARK 0x11 + +/* SE_UART_MANUAL_RFR register fields */ +#define UART_MANUAL_RFR_EN BIT(31) +#define UART_RFR_NOT_READY BIT(1) +#define UART_RFR_READY BIT(0) + +/* UART M_CMD OP codes */ +#define UART_START_TX 0x1 +#define UART_START_BREAK 0x4 +#define UART_STOP_BREAK 0x5 +/* UART S_CMD OP codes */ +#define UART_START_READ 0x1 +#define UART_PARAM 0x1 + +#define UART_OVERSAMPLING 32 +#define STALE_TIMEOUT 16 +#define DEFAULT_BITS_PER_CHAR 10 +#define GENI_UART_CONS_PORTS 1 +#define GENI_UART_PORTS 3 +#define DEF_FIFO_DEPTH_WORDS 16 +#define DEF_TX_WM 2 +#define DEF_FIFO_WIDTH_BITS 32 +#define UART_RX_WM 2 + +/* SE_UART_LOOPBACK_CFG */ +#define RX_TX_SORTED BIT(0) +#define CTS_RTS_SORTED BIT(1) +#define RX_TX_CTS_RTS_SORTED (RX_TX_SORTED | CTS_RTS_SORTED) + +/* UART pin swap value */ +#define DEFAULT_IO_MACRO_IO0_IO1_MASK GENMASK(3, 0) +#define IO_MACRO_IO0_SEL 0x3 +#define DEFAULT_IO_MACRO_IO2_IO3_MASK GENMASK(15, 4) +#define IO_MACRO_IO2_IO3_SWAP 0x4640 + +/* We always configure 4 bytes per FIFO word */ +#define BYTES_PER_FIFO_WORD 4 + +struct qcom_geni_private_data { + /* NOTE: earlycon port will have NULL here */ + struct uart_driver *drv; + + u32 poll_cached_bytes; + unsigned int poll_cached_bytes_cnt; + + u32 write_cached_bytes; + unsigned int write_cached_bytes_cnt; +}; + +struct qcom_geni_serial_port { + struct uart_port uport; + struct geni_se se; + const char *name; + u32 tx_fifo_depth; + u32 tx_fifo_width; + u32 rx_fifo_depth; + bool setup; + unsigned long clk_rate; + int (*handle_rx)(struct uart_port *uport, u32 bytes, bool drop); + unsigned int baud; + void *rx_fifo; + u32 loopback; + bool brk; + + unsigned int tx_remaining; + int wakeup_irq; + bool rx_tx_swap; + bool cts_rts_swap; + + struct qcom_geni_private_data private_data; +}; + +static const struct uart_ops qcom_geni_console_pops; +static const struct uart_ops qcom_geni_uart_pops; +static struct uart_driver qcom_geni_console_driver; +static struct uart_driver qcom_geni_uart_driver; +static int handle_rx_console(struct uart_port *uport, u32 bytes, bool drop); +static int handle_rx_uart(struct uart_port *uport, u32 bytes, bool drop); +static unsigned int qcom_geni_serial_tx_empty(struct uart_port *port); +static void qcom_geni_serial_stop_rx(struct uart_port *uport); +static void qcom_geni_serial_handle_rx(struct uart_port *uport, bool drop); + +static const unsigned long root_freq[] = {7372800, 14745600, 19200000, 29491200, + 32000000, 48000000, 51200000, 64000000, + 80000000, 96000000, 100000000, + 102400000, 112000000, 120000000, + 128000000}; + +#define to_dev_port(ptr, member) \ + container_of(ptr, struct qcom_geni_serial_port, member) + +static struct qcom_geni_serial_port qcom_geni_uart_ports[GENI_UART_PORTS] = { + [0] = { + .uport = { + .iotype = UPIO_MEM, + .ops = &qcom_geni_uart_pops, + .flags = UPF_BOOT_AUTOCONF, + .line = 0, + }, + }, + [1] = { + .uport = { + .iotype = UPIO_MEM, + .ops = &qcom_geni_uart_pops, + .flags = UPF_BOOT_AUTOCONF, + .line = 1, + }, + }, + [2] = { + .uport = { + .iotype = UPIO_MEM, + .ops = &qcom_geni_uart_pops, + .flags = UPF_BOOT_AUTOCONF, + .line = 2, + }, + }, +}; + +static struct qcom_geni_serial_port qcom_geni_console_port = { + .uport = { + .iotype = UPIO_MEM, + .ops = &qcom_geni_console_pops, + .flags = UPF_BOOT_AUTOCONF, + .line = 0, + }, +}; + +static int qcom_geni_serial_request_port(struct uart_port *uport) +{ + struct platform_device *pdev = to_platform_device(uport->dev); + struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + + uport->membase = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(uport->membase)) + return PTR_ERR(uport->membase); + port->se.base = uport->membase; + return 0; +} + +static void qcom_geni_serial_config_port(struct uart_port *uport, int cfg_flags) +{ + if (cfg_flags & UART_CONFIG_TYPE) { + uport->type = PORT_MSM; + qcom_geni_serial_request_port(uport); + } +} + +static unsigned int qcom_geni_serial_get_mctrl(struct uart_port *uport) +{ + unsigned int mctrl = TIOCM_DSR | TIOCM_CAR; + u32 geni_ios; + + if (uart_console(uport)) { + mctrl |= TIOCM_CTS; + } else { + geni_ios = readl(uport->membase + SE_GENI_IOS); + if (!(geni_ios & IO2_DATA_IN)) + mctrl |= TIOCM_CTS; + } + + return mctrl; +} + +static void qcom_geni_serial_set_mctrl(struct uart_port *uport, + unsigned int mctrl) +{ + u32 uart_manual_rfr = 0; + struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + + if (uart_console(uport)) + return; + + if (mctrl & TIOCM_LOOP) + port->loopback = RX_TX_CTS_RTS_SORTED; + + if (!(mctrl & TIOCM_RTS) && !uport->suspended) + uart_manual_rfr = UART_MANUAL_RFR_EN | UART_RFR_NOT_READY; + writel(uart_manual_rfr, uport->membase + SE_UART_MANUAL_RFR); +} + +static const char *qcom_geni_serial_get_type(struct uart_port *uport) +{ + return "MSM"; +} + +static struct qcom_geni_serial_port *get_port_from_line(int line, bool console) +{ + struct qcom_geni_serial_port *port; + int nr_ports = console ? GENI_UART_CONS_PORTS : GENI_UART_PORTS; + + if (line < 0 || line >= nr_ports) + return ERR_PTR(-ENXIO); + + port = console ? &qcom_geni_console_port : &qcom_geni_uart_ports[line]; + return port; +} + +static bool qcom_geni_serial_poll_bit(struct uart_port *uport, + int offset, int field, bool set) +{ + u32 reg; + struct qcom_geni_serial_port *port; + unsigned int baud; + unsigned int fifo_bits; + unsigned long timeout_us = 20000; + struct qcom_geni_private_data *private_data = uport->private_data; + + if (private_data->drv) { + port = to_dev_port(uport, uport); + baud = port->baud; + if (!baud) + baud = 115200; + fifo_bits = port->tx_fifo_depth * port->tx_fifo_width; + /* + * Total polling iterations based on FIFO worth of bytes to be + * sent at current baud. Add a little fluff to the wait. + */ + timeout_us = ((fifo_bits * USEC_PER_SEC) / baud) + 500; + } + + /* + * Use custom implementation instead of readl_poll_atomic since ktimer + * is not ready at the time of early console. + */ + timeout_us = DIV_ROUND_UP(timeout_us, 10) * 10; + while (timeout_us) { + reg = readl(uport->membase + offset); + if ((bool)(reg & field) == set) + return true; + udelay(10); + timeout_us -= 10; + } + return false; +} + +static void qcom_geni_serial_setup_tx(struct uart_port *uport, u32 xmit_size) +{ + u32 m_cmd; + + writel(xmit_size, uport->membase + SE_UART_TX_TRANS_LEN); + m_cmd = UART_START_TX << M_OPCODE_SHFT; + writel(m_cmd, uport->membase + SE_GENI_M_CMD0); +} + +static void qcom_geni_serial_poll_tx_done(struct uart_port *uport) +{ + int done; + u32 irq_clear = M_CMD_DONE_EN; + + done = qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS, + M_CMD_DONE_EN, true); + if (!done) { + writel(M_GENI_CMD_ABORT, uport->membase + + SE_GENI_M_CMD_CTRL_REG); + irq_clear |= M_CMD_ABORT_EN; + qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS, + M_CMD_ABORT_EN, true); + } + writel(irq_clear, uport->membase + SE_GENI_M_IRQ_CLEAR); +} + +static void qcom_geni_serial_abort_rx(struct uart_port *uport) +{ + u32 irq_clear = S_CMD_DONE_EN | S_CMD_ABORT_EN; + + writel(S_GENI_CMD_ABORT, uport->membase + SE_GENI_S_CMD_CTRL_REG); + qcom_geni_serial_poll_bit(uport, SE_GENI_S_CMD_CTRL_REG, + S_GENI_CMD_ABORT, false); + writel(irq_clear, uport->membase + SE_GENI_S_IRQ_CLEAR); + writel(FORCE_DEFAULT, uport->membase + GENI_FORCE_DEFAULT_REG); +} + +#ifdef CONFIG_CONSOLE_POLL + +static int qcom_geni_serial_get_char(struct uart_port *uport) +{ + struct qcom_geni_private_data *private_data = uport->private_data; + u32 status; + u32 word_cnt; + int ret; + + if (!private_data->poll_cached_bytes_cnt) { + status = readl(uport->membase + SE_GENI_M_IRQ_STATUS); + writel(status, uport->membase + SE_GENI_M_IRQ_CLEAR); + + status = readl(uport->membase + SE_GENI_S_IRQ_STATUS); + writel(status, uport->membase + SE_GENI_S_IRQ_CLEAR); + + status = readl(uport->membase + SE_GENI_RX_FIFO_STATUS); + word_cnt = status & RX_FIFO_WC_MSK; + if (!word_cnt) + return NO_POLL_CHAR; + + if (word_cnt == 1 && (status & RX_LAST)) + /* + * NOTE: If RX_LAST_BYTE_VALID is 0 it needs to be + * treated as if it was BYTES_PER_FIFO_WORD. + */ + private_data->poll_cached_bytes_cnt = + (status & RX_LAST_BYTE_VALID_MSK) >> + RX_LAST_BYTE_VALID_SHFT; + + if (private_data->poll_cached_bytes_cnt == 0) + private_data->poll_cached_bytes_cnt = BYTES_PER_FIFO_WORD; + + private_data->poll_cached_bytes = + readl(uport->membase + SE_GENI_RX_FIFOn); + } + + private_data->poll_cached_bytes_cnt--; + ret = private_data->poll_cached_bytes & 0xff; + private_data->poll_cached_bytes >>= 8; + + return ret; +} + +static void qcom_geni_serial_poll_put_char(struct uart_port *uport, + unsigned char c) +{ + writel(DEF_TX_WM, uport->membase + SE_GENI_TX_WATERMARK_REG); + qcom_geni_serial_setup_tx(uport, 1); + WARN_ON(!qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS, + M_TX_FIFO_WATERMARK_EN, true)); + writel(c, uport->membase + SE_GENI_TX_FIFOn); + writel(M_TX_FIFO_WATERMARK_EN, uport->membase + SE_GENI_M_IRQ_CLEAR); + qcom_geni_serial_poll_tx_done(uport); +} +#endif + +#ifdef CONFIG_SERIAL_QCOM_GENI_CONSOLE +static void qcom_geni_serial_wr_char(struct uart_port *uport, int ch) +{ + struct qcom_geni_private_data *private_data = uport->private_data; + + private_data->write_cached_bytes = + (private_data->write_cached_bytes >> 8) | (ch << 24); + private_data->write_cached_bytes_cnt++; + + if (private_data->write_cached_bytes_cnt == BYTES_PER_FIFO_WORD) { + writel(private_data->write_cached_bytes, + uport->membase + SE_GENI_TX_FIFOn); + private_data->write_cached_bytes_cnt = 0; + } +} + +static void +__qcom_geni_serial_console_write(struct uart_port *uport, const char *s, + unsigned int count) +{ + struct qcom_geni_private_data *private_data = uport->private_data; + + int i; + u32 bytes_to_send = count; + + for (i = 0; i < count; i++) { + /* + * uart_console_write() adds a carriage return for each newline. + * Account for additional bytes to be written. + */ + if (s[i] == '\n') + bytes_to_send++; + } + + writel(DEF_TX_WM, uport->membase + SE_GENI_TX_WATERMARK_REG); + qcom_geni_serial_setup_tx(uport, bytes_to_send); + for (i = 0; i < count; ) { + size_t chars_to_write = 0; + size_t avail = DEF_FIFO_DEPTH_WORDS - DEF_TX_WM; + + /* + * If the WM bit never set, then the Tx state machine is not + * in a valid state, so break, cancel/abort any existing + * command. Unfortunately the current data being written is + * lost. + */ + if (!qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS, + M_TX_FIFO_WATERMARK_EN, true)) + break; + chars_to_write = min_t(size_t, count - i, avail / 2); + uart_console_write(uport, s + i, chars_to_write, + qcom_geni_serial_wr_char); + writel(M_TX_FIFO_WATERMARK_EN, uport->membase + + SE_GENI_M_IRQ_CLEAR); + i += chars_to_write; + } + + if (private_data->write_cached_bytes_cnt) { + private_data->write_cached_bytes >>= BITS_PER_BYTE * + (BYTES_PER_FIFO_WORD - private_data->write_cached_bytes_cnt); + writel(private_data->write_cached_bytes, + uport->membase + SE_GENI_TX_FIFOn); + private_data->write_cached_bytes_cnt = 0; + } + + qcom_geni_serial_poll_tx_done(uport); +} + +static void qcom_geni_serial_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_port *uport; + struct qcom_geni_serial_port *port; + bool locked = true; + unsigned long flags; + u32 geni_status; + u32 irq_en; + + WARN_ON(co->index < 0 || co->index >= GENI_UART_CONS_PORTS); + + port = get_port_from_line(co->index, true); + if (IS_ERR(port)) + return; + + uport = &port->uport; + if (oops_in_progress) + locked = spin_trylock_irqsave(&uport->lock, flags); + else + spin_lock_irqsave(&uport->lock, flags); + + geni_status = readl(uport->membase + SE_GENI_STATUS); + + /* Cancel the current write to log the fault */ + if (!locked) { + geni_se_cancel_m_cmd(&port->se); + if (!qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS, + M_CMD_CANCEL_EN, true)) { + geni_se_abort_m_cmd(&port->se); + qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS, + M_CMD_ABORT_EN, true); + writel(M_CMD_ABORT_EN, uport->membase + + SE_GENI_M_IRQ_CLEAR); + } + writel(M_CMD_CANCEL_EN, uport->membase + SE_GENI_M_IRQ_CLEAR); + } else if ((geni_status & M_GENI_CMD_ACTIVE) && !port->tx_remaining) { + /* + * It seems we can't interrupt existing transfers if all data + * has been sent, in which case we need to look for done first. + */ + qcom_geni_serial_poll_tx_done(uport); + + if (uart_circ_chars_pending(&uport->state->xmit)) { + irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN); + writel(irq_en | M_TX_FIFO_WATERMARK_EN, + uport->membase + SE_GENI_M_IRQ_EN); + } + } + + __qcom_geni_serial_console_write(uport, s, count); + + if (port->tx_remaining) + qcom_geni_serial_setup_tx(uport, port->tx_remaining); + + if (locked) + spin_unlock_irqrestore(&uport->lock, flags); +} + +static int handle_rx_console(struct uart_port *uport, u32 bytes, bool drop) +{ + u32 i; + unsigned char buf[sizeof(u32)]; + struct tty_port *tport; + struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + + tport = &uport->state->port; + for (i = 0; i < bytes; ) { + int c; + int chunk = min_t(int, bytes - i, BYTES_PER_FIFO_WORD); + + ioread32_rep(uport->membase + SE_GENI_RX_FIFOn, buf, 1); + i += chunk; + if (drop) + continue; + + for (c = 0; c < chunk; c++) { + int sysrq; + + uport->icount.rx++; + if (port->brk && buf[c] == 0) { + port->brk = false; + if (uart_handle_break(uport)) + continue; + } + + sysrq = uart_prepare_sysrq_char(uport, buf[c]); + + if (!sysrq) + tty_insert_flip_char(tport, buf[c], TTY_NORMAL); + } + } + if (!drop) + tty_flip_buffer_push(tport); + return 0; +} +#else +static int handle_rx_console(struct uart_port *uport, u32 bytes, bool drop) +{ + return -EPERM; +} + +#endif /* CONFIG_SERIAL_QCOM_GENI_CONSOLE */ + +static int handle_rx_uart(struct uart_port *uport, u32 bytes, bool drop) +{ + struct tty_port *tport; + struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + u32 num_bytes_pw = port->tx_fifo_width / BITS_PER_BYTE; + u32 words = ALIGN(bytes, num_bytes_pw) / num_bytes_pw; + int ret; + + tport = &uport->state->port; + ioread32_rep(uport->membase + SE_GENI_RX_FIFOn, port->rx_fifo, words); + if (drop) + return 0; + + ret = tty_insert_flip_string(tport, port->rx_fifo, bytes); + if (ret != bytes) { + dev_err(uport->dev, "%s:Unable to push data ret %d_bytes %d\n", + __func__, ret, bytes); + WARN_ON_ONCE(1); + } + uport->icount.rx += ret; + tty_flip_buffer_push(tport); + return ret; +} + +static void qcom_geni_serial_start_tx(struct uart_port *uport) +{ + u32 irq_en; + u32 status; + + status = readl(uport->membase + SE_GENI_STATUS); + if (status & M_GENI_CMD_ACTIVE) + return; + + if (!qcom_geni_serial_tx_empty(uport)) + return; + + irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN); + irq_en |= M_TX_FIFO_WATERMARK_EN | M_CMD_DONE_EN; + + writel(DEF_TX_WM, uport->membase + SE_GENI_TX_WATERMARK_REG); + writel(irq_en, uport->membase + SE_GENI_M_IRQ_EN); +} + +static void qcom_geni_serial_stop_tx(struct uart_port *uport) +{ + u32 irq_en; + u32 status; + struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + + irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN); + irq_en &= ~(M_CMD_DONE_EN | M_TX_FIFO_WATERMARK_EN); + writel(0, uport->membase + SE_GENI_TX_WATERMARK_REG); + writel(irq_en, uport->membase + SE_GENI_M_IRQ_EN); + status = readl(uport->membase + SE_GENI_STATUS); + /* Possible stop tx is called multiple times. */ + if (!(status & M_GENI_CMD_ACTIVE)) + return; + + geni_se_cancel_m_cmd(&port->se); + if (!qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS, + M_CMD_CANCEL_EN, true)) { + geni_se_abort_m_cmd(&port->se); + qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS, + M_CMD_ABORT_EN, true); + writel(M_CMD_ABORT_EN, uport->membase + SE_GENI_M_IRQ_CLEAR); + } + writel(M_CMD_CANCEL_EN, uport->membase + SE_GENI_M_IRQ_CLEAR); +} + +static void qcom_geni_serial_start_rx(struct uart_port *uport) +{ + u32 irq_en; + u32 status; + struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + + status = readl(uport->membase + SE_GENI_STATUS); + if (status & S_GENI_CMD_ACTIVE) + qcom_geni_serial_stop_rx(uport); + + geni_se_setup_s_cmd(&port->se, UART_START_READ, 0); + + irq_en = readl(uport->membase + SE_GENI_S_IRQ_EN); + irq_en |= S_RX_FIFO_WATERMARK_EN | S_RX_FIFO_LAST_EN; + writel(irq_en, uport->membase + SE_GENI_S_IRQ_EN); + + irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN); + irq_en |= M_RX_FIFO_WATERMARK_EN | M_RX_FIFO_LAST_EN; + writel(irq_en, uport->membase + SE_GENI_M_IRQ_EN); +} + +static void qcom_geni_serial_stop_rx(struct uart_port *uport) +{ + u32 irq_en; + u32 status; + struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + u32 s_irq_status; + + irq_en = readl(uport->membase + SE_GENI_S_IRQ_EN); + irq_en &= ~(S_RX_FIFO_WATERMARK_EN | S_RX_FIFO_LAST_EN); + writel(irq_en, uport->membase + SE_GENI_S_IRQ_EN); + + irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN); + irq_en &= ~(M_RX_FIFO_WATERMARK_EN | M_RX_FIFO_LAST_EN); + writel(irq_en, uport->membase + SE_GENI_M_IRQ_EN); + + status = readl(uport->membase + SE_GENI_STATUS); + /* Possible stop rx is called multiple times. */ + if (!(status & S_GENI_CMD_ACTIVE)) + return; + + geni_se_cancel_s_cmd(&port->se); + qcom_geni_serial_poll_bit(uport, SE_GENI_S_IRQ_STATUS, + S_CMD_CANCEL_EN, true); + /* + * If timeout occurs secondary engine remains active + * and Abort sequence is executed. + */ + s_irq_status = readl(uport->membase + SE_GENI_S_IRQ_STATUS); + /* Flush the Rx buffer */ + if (s_irq_status & S_RX_FIFO_LAST_EN) + qcom_geni_serial_handle_rx(uport, true); + writel(s_irq_status, uport->membase + SE_GENI_S_IRQ_CLEAR); + + status = readl(uport->membase + SE_GENI_STATUS); + if (status & S_GENI_CMD_ACTIVE) + qcom_geni_serial_abort_rx(uport); +} + +static void qcom_geni_serial_handle_rx(struct uart_port *uport, bool drop) +{ + u32 status; + u32 word_cnt; + u32 last_word_byte_cnt; + u32 last_word_partial; + u32 total_bytes; + struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + + status = readl(uport->membase + SE_GENI_RX_FIFO_STATUS); + word_cnt = status & RX_FIFO_WC_MSK; + last_word_partial = status & RX_LAST; + last_word_byte_cnt = (status & RX_LAST_BYTE_VALID_MSK) >> + RX_LAST_BYTE_VALID_SHFT; + + if (!word_cnt) + return; + total_bytes = BYTES_PER_FIFO_WORD * (word_cnt - 1); + if (last_word_partial && last_word_byte_cnt) + total_bytes += last_word_byte_cnt; + else + total_bytes += BYTES_PER_FIFO_WORD; + port->handle_rx(uport, total_bytes, drop); +} + +static void qcom_geni_serial_handle_tx(struct uart_port *uport, bool done, + bool active) +{ + struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + struct circ_buf *xmit = &uport->state->xmit; + size_t avail; + size_t remaining; + size_t pending; + int i; + u32 status; + u32 irq_en; + unsigned int chunk; + int tail; + + status = readl(uport->membase + SE_GENI_TX_FIFO_STATUS); + + /* Complete the current tx command before taking newly added data */ + if (active) + pending = port->tx_remaining; + else + pending = uart_circ_chars_pending(xmit); + + /* All data has been transmitted and acknowledged as received */ + if (!pending && !status && done) { + qcom_geni_serial_stop_tx(uport); + goto out_write_wakeup; + } + + avail = port->tx_fifo_depth - (status & TX_FIFO_WC); + avail *= BYTES_PER_FIFO_WORD; + + tail = xmit->tail; + chunk = min(avail, pending); + if (!chunk) + goto out_write_wakeup; + + if (!port->tx_remaining) { + qcom_geni_serial_setup_tx(uport, pending); + port->tx_remaining = pending; + + irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN); + if (!(irq_en & M_TX_FIFO_WATERMARK_EN)) + writel(irq_en | M_TX_FIFO_WATERMARK_EN, + uport->membase + SE_GENI_M_IRQ_EN); + } + + remaining = chunk; + for (i = 0; i < chunk; ) { + unsigned int tx_bytes; + u8 buf[sizeof(u32)]; + int c; + + memset(buf, 0, sizeof(buf)); + tx_bytes = min_t(size_t, remaining, BYTES_PER_FIFO_WORD); + + for (c = 0; c < tx_bytes ; c++) { + buf[c] = xmit->buf[tail++]; + tail &= UART_XMIT_SIZE - 1; + } + + iowrite32_rep(uport->membase + SE_GENI_TX_FIFOn, buf, 1); + + i += tx_bytes; + uport->icount.tx += tx_bytes; + remaining -= tx_bytes; + port->tx_remaining -= tx_bytes; + } + + xmit->tail = tail; + + /* + * The tx fifo watermark is level triggered and latched. Though we had + * cleared it in qcom_geni_serial_isr it will have already reasserted + * so we must clear it again here after our writes. + */ + writel(M_TX_FIFO_WATERMARK_EN, + uport->membase + SE_GENI_M_IRQ_CLEAR); + +out_write_wakeup: + if (!port->tx_remaining) { + irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN); + if (irq_en & M_TX_FIFO_WATERMARK_EN) + writel(irq_en & ~M_TX_FIFO_WATERMARK_EN, + uport->membase + SE_GENI_M_IRQ_EN); + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(uport); +} + +static irqreturn_t qcom_geni_serial_isr(int isr, void *dev) +{ + u32 m_irq_en; + u32 m_irq_status; + u32 s_irq_status; + u32 geni_status; + struct uart_port *uport = dev; + unsigned long flags; + bool drop_rx = false; + struct tty_port *tport = &uport->state->port; + struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + + if (uport->suspended) + return IRQ_NONE; + + spin_lock_irqsave(&uport->lock, flags); + m_irq_status = readl(uport->membase + SE_GENI_M_IRQ_STATUS); + s_irq_status = readl(uport->membase + SE_GENI_S_IRQ_STATUS); + geni_status = readl(uport->membase + SE_GENI_STATUS); + m_irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN); + writel(m_irq_status, uport->membase + SE_GENI_M_IRQ_CLEAR); + writel(s_irq_status, uport->membase + SE_GENI_S_IRQ_CLEAR); + + if (WARN_ON(m_irq_status & M_ILLEGAL_CMD_EN)) + goto out_unlock; + + if (s_irq_status & S_RX_FIFO_WR_ERR_EN) { + uport->icount.overrun++; + tty_insert_flip_char(tport, 0, TTY_OVERRUN); + } + + if (m_irq_status & m_irq_en & (M_TX_FIFO_WATERMARK_EN | M_CMD_DONE_EN)) + qcom_geni_serial_handle_tx(uport, m_irq_status & M_CMD_DONE_EN, + geni_status & M_GENI_CMD_ACTIVE); + + if (s_irq_status & S_GP_IRQ_0_EN || s_irq_status & S_GP_IRQ_1_EN) { + if (s_irq_status & S_GP_IRQ_0_EN) + uport->icount.parity++; + drop_rx = true; + } else if (s_irq_status & S_GP_IRQ_2_EN || + s_irq_status & S_GP_IRQ_3_EN) { + uport->icount.brk++; + port->brk = true; + } + + if (s_irq_status & S_RX_FIFO_WATERMARK_EN || + s_irq_status & S_RX_FIFO_LAST_EN) + qcom_geni_serial_handle_rx(uport, drop_rx); + +out_unlock: + uart_unlock_and_check_sysrq(uport, flags); + + return IRQ_HANDLED; +} + +static int setup_fifos(struct qcom_geni_serial_port *port) +{ + struct uart_port *uport; + u32 old_rx_fifo_depth = port->rx_fifo_depth; + + uport = &port->uport; + port->tx_fifo_depth = geni_se_get_tx_fifo_depth(&port->se); + port->tx_fifo_width = geni_se_get_tx_fifo_width(&port->se); + port->rx_fifo_depth = geni_se_get_rx_fifo_depth(&port->se); + uport->fifosize = + (port->tx_fifo_depth * port->tx_fifo_width) / BITS_PER_BYTE; + + if (port->rx_fifo && (old_rx_fifo_depth != port->rx_fifo_depth) && port->rx_fifo_depth) { + port->rx_fifo = devm_krealloc(uport->dev, port->rx_fifo, + port->rx_fifo_depth * sizeof(u32), + GFP_KERNEL); + if (!port->rx_fifo) + return -ENOMEM; + } + + return 0; +} + + +static void qcom_geni_serial_shutdown(struct uart_port *uport) +{ + disable_irq(uport->irq); +} + +static int qcom_geni_serial_port_setup(struct uart_port *uport) +{ + struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + u32 rxstale = DEFAULT_BITS_PER_CHAR * STALE_TIMEOUT; + u32 proto; + u32 pin_swap; + int ret; + + proto = geni_se_read_proto(&port->se); + if (proto != GENI_SE_UART) { + dev_err(uport->dev, "Invalid FW loaded, proto: %d\n", proto); + return -ENXIO; + } + + qcom_geni_serial_stop_rx(uport); + + ret = setup_fifos(port); + if (ret) + return ret; + + writel(rxstale, uport->membase + SE_UART_RX_STALE_CNT); + + pin_swap = readl(uport->membase + SE_UART_IO_MACRO_CTRL); + if (port->rx_tx_swap) { + pin_swap &= ~DEFAULT_IO_MACRO_IO2_IO3_MASK; + pin_swap |= IO_MACRO_IO2_IO3_SWAP; + } + if (port->cts_rts_swap) { + pin_swap &= ~DEFAULT_IO_MACRO_IO0_IO1_MASK; + pin_swap |= IO_MACRO_IO0_SEL; + } + /* Configure this register if RX-TX, CTS-RTS pins are swapped */ + if (port->rx_tx_swap || port->cts_rts_swap) + writel(pin_swap, uport->membase + SE_UART_IO_MACRO_CTRL); + + /* + * Make an unconditional cancel on the main sequencer to reset + * it else we could end up in data loss scenarios. + */ + if (uart_console(uport)) + qcom_geni_serial_poll_tx_done(uport); + geni_se_config_packing(&port->se, BITS_PER_BYTE, BYTES_PER_FIFO_WORD, + false, true, true); + geni_se_init(&port->se, UART_RX_WM, port->rx_fifo_depth - 2); + geni_se_select_mode(&port->se, GENI_SE_FIFO); + port->setup = true; + + return 0; +} + +static int qcom_geni_serial_startup(struct uart_port *uport) +{ + int ret; + struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + + if (!port->setup) { + ret = qcom_geni_serial_port_setup(uport); + if (ret) + return ret; + } + enable_irq(uport->irq); + + return 0; +} + +static unsigned long get_clk_cfg(unsigned long clk_freq) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(root_freq); i++) { + if (!(root_freq[i] % clk_freq)) + return root_freq[i]; + } + return 0; +} + +static unsigned long get_clk_div_rate(unsigned int baud, + unsigned int sampling_rate, unsigned int *clk_div) +{ + unsigned long ser_clk; + unsigned long desired_clk; + + desired_clk = baud * sampling_rate; + ser_clk = get_clk_cfg(desired_clk); + if (!ser_clk) { + pr_err("%s: Can't find matching DFS entry for baud %d\n", + __func__, baud); + return ser_clk; + } + + *clk_div = ser_clk / desired_clk; + return ser_clk; +} + +static void qcom_geni_serial_set_termios(struct uart_port *uport, + struct ktermios *termios, struct ktermios *old) +{ + unsigned int baud; + u32 bits_per_char; + u32 tx_trans_cfg; + u32 tx_parity_cfg; + u32 rx_trans_cfg; + u32 rx_parity_cfg; + u32 stop_bit_len; + unsigned int clk_div; + u32 ser_clk_cfg; + struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + unsigned long clk_rate; + u32 ver, sampling_rate; + unsigned int avg_bw_core; + + qcom_geni_serial_stop_rx(uport); + /* baud rate */ + baud = uart_get_baud_rate(uport, termios, old, 300, 4000000); + port->baud = baud; + + sampling_rate = UART_OVERSAMPLING; + /* Sampling rate is halved for IP versions >= 2.5 */ + ver = geni_se_get_qup_hw_version(&port->se); + if (ver >= QUP_SE_VERSION_2_5) + sampling_rate /= 2; + + clk_rate = get_clk_div_rate(baud, sampling_rate, &clk_div); + if (!clk_rate) + goto out_restart_rx; + + uport->uartclk = clk_rate; + port->clk_rate = clk_rate; + dev_pm_opp_set_rate(uport->dev, clk_rate); + ser_clk_cfg = SER_CLK_EN; + ser_clk_cfg |= clk_div << CLK_DIV_SHFT; + + /* + * Bump up BW vote on CPU and CORE path as driver supports FIFO mode + * only. + */ + avg_bw_core = (baud > 115200) ? Bps_to_icc(CORE_2X_50_MHZ) + : GENI_DEFAULT_BW; + port->se.icc_paths[GENI_TO_CORE].avg_bw = avg_bw_core; + port->se.icc_paths[CPU_TO_GENI].avg_bw = Bps_to_icc(baud); + geni_icc_set_bw(&port->se); + + /* parity */ + tx_trans_cfg = readl(uport->membase + SE_UART_TX_TRANS_CFG); + tx_parity_cfg = readl(uport->membase + SE_UART_TX_PARITY_CFG); + rx_trans_cfg = readl(uport->membase + SE_UART_RX_TRANS_CFG); + rx_parity_cfg = readl(uport->membase + SE_UART_RX_PARITY_CFG); + if (termios->c_cflag & PARENB) { + tx_trans_cfg |= UART_TX_PAR_EN; + rx_trans_cfg |= UART_RX_PAR_EN; + tx_parity_cfg |= PAR_CALC_EN; + rx_parity_cfg |= PAR_CALC_EN; + if (termios->c_cflag & PARODD) { + tx_parity_cfg |= PAR_ODD; + rx_parity_cfg |= PAR_ODD; + } else if (termios->c_cflag & CMSPAR) { + tx_parity_cfg |= PAR_SPACE; + rx_parity_cfg |= PAR_SPACE; + } else { + tx_parity_cfg |= PAR_EVEN; + rx_parity_cfg |= PAR_EVEN; + } + } else { + tx_trans_cfg &= ~UART_TX_PAR_EN; + rx_trans_cfg &= ~UART_RX_PAR_EN; + tx_parity_cfg &= ~PAR_CALC_EN; + rx_parity_cfg &= ~PAR_CALC_EN; + } + + /* bits per char */ + switch (termios->c_cflag & CSIZE) { + case CS5: + bits_per_char = 5; + break; + case CS6: + bits_per_char = 6; + break; + case CS7: + bits_per_char = 7; + break; + case CS8: + default: + bits_per_char = 8; + break; + } + + /* stop bits */ + if (termios->c_cflag & CSTOPB) + stop_bit_len = TX_STOP_BIT_LEN_2; + else + stop_bit_len = TX_STOP_BIT_LEN_1; + + /* flow control, clear the CTS_MASK bit if using flow control. */ + if (termios->c_cflag & CRTSCTS) + tx_trans_cfg &= ~UART_CTS_MASK; + else + tx_trans_cfg |= UART_CTS_MASK; + + if (baud) + uart_update_timeout(uport, termios->c_cflag, baud); + + if (!uart_console(uport)) + writel(port->loopback, + uport->membase + SE_UART_LOOPBACK_CFG); + writel(tx_trans_cfg, uport->membase + SE_UART_TX_TRANS_CFG); + writel(tx_parity_cfg, uport->membase + SE_UART_TX_PARITY_CFG); + writel(rx_trans_cfg, uport->membase + SE_UART_RX_TRANS_CFG); + writel(rx_parity_cfg, uport->membase + SE_UART_RX_PARITY_CFG); + writel(bits_per_char, uport->membase + SE_UART_TX_WORD_LEN); + writel(bits_per_char, uport->membase + SE_UART_RX_WORD_LEN); + writel(stop_bit_len, uport->membase + SE_UART_TX_STOP_BIT_LEN); + writel(ser_clk_cfg, uport->membase + GENI_SER_M_CLK_CFG); + writel(ser_clk_cfg, uport->membase + GENI_SER_S_CLK_CFG); +out_restart_rx: + qcom_geni_serial_start_rx(uport); +} + +static unsigned int qcom_geni_serial_tx_empty(struct uart_port *uport) +{ + return !readl(uport->membase + SE_GENI_TX_FIFO_STATUS); +} + +#ifdef CONFIG_SERIAL_QCOM_GENI_CONSOLE +static int qcom_geni_console_setup(struct console *co, char *options) +{ + struct uart_port *uport; + struct qcom_geni_serial_port *port; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + int ret; + + if (co->index >= GENI_UART_CONS_PORTS || co->index < 0) + return -ENXIO; + + port = get_port_from_line(co->index, true); + if (IS_ERR(port)) { + pr_err("Invalid line %d\n", co->index); + return PTR_ERR(port); + } + + uport = &port->uport; + + if (unlikely(!uport->membase)) + return -ENXIO; + + if (!port->setup) { + ret = qcom_geni_serial_port_setup(uport); + if (ret) + return ret; + } + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(uport, co, baud, parity, bits, flow); +} + +static void qcom_geni_serial_earlycon_write(struct console *con, + const char *s, unsigned int n) +{ + struct earlycon_device *dev = con->data; + + __qcom_geni_serial_console_write(&dev->port, s, n); +} + +#ifdef CONFIG_CONSOLE_POLL +static int qcom_geni_serial_earlycon_read(struct console *con, + char *s, unsigned int n) +{ + struct earlycon_device *dev = con->data; + struct uart_port *uport = &dev->port; + int num_read = 0; + int ch; + + while (num_read < n) { + ch = qcom_geni_serial_get_char(uport); + if (ch == NO_POLL_CHAR) + break; + s[num_read++] = ch; + } + + return num_read; +} + +static void __init qcom_geni_serial_enable_early_read(struct geni_se *se, + struct console *con) +{ + geni_se_setup_s_cmd(se, UART_START_READ, 0); + con->read = qcom_geni_serial_earlycon_read; +} +#else +static inline void qcom_geni_serial_enable_early_read(struct geni_se *se, + struct console *con) { } +#endif + +static struct qcom_geni_private_data earlycon_private_data; + +static int __init qcom_geni_serial_earlycon_setup(struct earlycon_device *dev, + const char *opt) +{ + struct uart_port *uport = &dev->port; + u32 tx_trans_cfg; + u32 tx_parity_cfg = 0; /* Disable Tx Parity */ + u32 rx_trans_cfg = 0; + u32 rx_parity_cfg = 0; /* Disable Rx Parity */ + u32 stop_bit_len = 0; /* Default stop bit length - 1 bit */ + u32 bits_per_char; + struct geni_se se; + + if (!uport->membase) + return -EINVAL; + + uport->private_data = &earlycon_private_data; + + memset(&se, 0, sizeof(se)); + se.base = uport->membase; + if (geni_se_read_proto(&se) != GENI_SE_UART) + return -ENXIO; + /* + * Ignore Flow control. + * n = 8. + */ + tx_trans_cfg = UART_CTS_MASK; + bits_per_char = BITS_PER_BYTE; + + /* + * Make an unconditional cancel on the main sequencer to reset + * it else we could end up in data loss scenarios. + */ + qcom_geni_serial_poll_tx_done(uport); + qcom_geni_serial_abort_rx(uport); + geni_se_config_packing(&se, BITS_PER_BYTE, BYTES_PER_FIFO_WORD, + false, true, true); + geni_se_init(&se, DEF_FIFO_DEPTH_WORDS / 2, DEF_FIFO_DEPTH_WORDS - 2); + geni_se_select_mode(&se, GENI_SE_FIFO); + + writel(tx_trans_cfg, uport->membase + SE_UART_TX_TRANS_CFG); + writel(tx_parity_cfg, uport->membase + SE_UART_TX_PARITY_CFG); + writel(rx_trans_cfg, uport->membase + SE_UART_RX_TRANS_CFG); + writel(rx_parity_cfg, uport->membase + SE_UART_RX_PARITY_CFG); + writel(bits_per_char, uport->membase + SE_UART_TX_WORD_LEN); + writel(bits_per_char, uport->membase + SE_UART_RX_WORD_LEN); + writel(stop_bit_len, uport->membase + SE_UART_TX_STOP_BIT_LEN); + + dev->con->write = qcom_geni_serial_earlycon_write; + dev->con->setup = NULL; + qcom_geni_serial_enable_early_read(&se, dev->con); + + return 0; +} +OF_EARLYCON_DECLARE(qcom_geni, "qcom,geni-debug-uart", + qcom_geni_serial_earlycon_setup); + +static int __init console_register(struct uart_driver *drv) +{ + return uart_register_driver(drv); +} + +static void console_unregister(struct uart_driver *drv) +{ + uart_unregister_driver(drv); +} + +static struct console cons_ops = { + .name = "ttyMSM", + .write = qcom_geni_serial_console_write, + .device = uart_console_device, + .setup = qcom_geni_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &qcom_geni_console_driver, +}; + +static struct uart_driver qcom_geni_console_driver = { + .owner = THIS_MODULE, + .driver_name = "qcom_geni_console", + .dev_name = "ttyMSM", + .nr = GENI_UART_CONS_PORTS, + .cons = &cons_ops, +}; +#else +static int console_register(struct uart_driver *drv) +{ + return 0; +} + +static void console_unregister(struct uart_driver *drv) +{ +} +#endif /* CONFIG_SERIAL_QCOM_GENI_CONSOLE */ + +static struct uart_driver qcom_geni_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "qcom_geni_uart", + .dev_name = "ttyHS", + .nr = GENI_UART_PORTS, +}; + +static void qcom_geni_serial_pm(struct uart_port *uport, + unsigned int new_state, unsigned int old_state) +{ + struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + + /* If we've never been called, treat it as off */ + if (old_state == UART_PM_STATE_UNDEFINED) + old_state = UART_PM_STATE_OFF; + + if (new_state == UART_PM_STATE_ON && old_state == UART_PM_STATE_OFF) { + geni_icc_enable(&port->se); + if (port->clk_rate) + dev_pm_opp_set_rate(uport->dev, port->clk_rate); + geni_se_resources_on(&port->se); + } else if (new_state == UART_PM_STATE_OFF && + old_state == UART_PM_STATE_ON) { + geni_se_resources_off(&port->se); + dev_pm_opp_set_rate(uport->dev, 0); + geni_icc_disable(&port->se); + } +} + +static const struct uart_ops qcom_geni_console_pops = { + .tx_empty = qcom_geni_serial_tx_empty, + .stop_tx = qcom_geni_serial_stop_tx, + .start_tx = qcom_geni_serial_start_tx, + .stop_rx = qcom_geni_serial_stop_rx, + .set_termios = qcom_geni_serial_set_termios, + .startup = qcom_geni_serial_startup, + .request_port = qcom_geni_serial_request_port, + .config_port = qcom_geni_serial_config_port, + .shutdown = qcom_geni_serial_shutdown, + .type = qcom_geni_serial_get_type, + .set_mctrl = qcom_geni_serial_set_mctrl, + .get_mctrl = qcom_geni_serial_get_mctrl, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = qcom_geni_serial_get_char, + .poll_put_char = qcom_geni_serial_poll_put_char, +#endif + .pm = qcom_geni_serial_pm, +}; + +static const struct uart_ops qcom_geni_uart_pops = { + .tx_empty = qcom_geni_serial_tx_empty, + .stop_tx = qcom_geni_serial_stop_tx, + .start_tx = qcom_geni_serial_start_tx, + .stop_rx = qcom_geni_serial_stop_rx, + .set_termios = qcom_geni_serial_set_termios, + .startup = qcom_geni_serial_startup, + .request_port = qcom_geni_serial_request_port, + .config_port = qcom_geni_serial_config_port, + .shutdown = qcom_geni_serial_shutdown, + .type = qcom_geni_serial_get_type, + .set_mctrl = qcom_geni_serial_set_mctrl, + .get_mctrl = qcom_geni_serial_get_mctrl, + .pm = qcom_geni_serial_pm, +}; + +static int qcom_geni_serial_probe(struct platform_device *pdev) +{ + int ret = 0; + int line = -1; + struct qcom_geni_serial_port *port; + struct uart_port *uport; + struct resource *res; + int irq; + bool console = false; + struct uart_driver *drv; + + if (of_device_is_compatible(pdev->dev.of_node, "qcom,geni-debug-uart")) + console = true; + + if (console) { + drv = &qcom_geni_console_driver; + line = of_alias_get_id(pdev->dev.of_node, "serial"); + } else { + drv = &qcom_geni_uart_driver; + line = of_alias_get_id(pdev->dev.of_node, "hsuart"); + } + + port = get_port_from_line(line, console); + if (IS_ERR(port)) { + dev_err(&pdev->dev, "Invalid line %d\n", line); + return PTR_ERR(port); + } + + uport = &port->uport; + /* Don't allow 2 drivers to access the same port */ + if (uport->private_data) + return -ENODEV; + + uport->dev = &pdev->dev; + port->se.dev = &pdev->dev; + port->se.wrapper = dev_get_drvdata(pdev->dev.parent); + port->se.clk = devm_clk_get(&pdev->dev, "se"); + if (IS_ERR(port->se.clk)) { + ret = PTR_ERR(port->se.clk); + dev_err(&pdev->dev, "Err getting SE Core clk %d\n", ret); + return ret; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -EINVAL; + uport->mapbase = res->start; + + port->tx_fifo_depth = DEF_FIFO_DEPTH_WORDS; + port->rx_fifo_depth = DEF_FIFO_DEPTH_WORDS; + port->tx_fifo_width = DEF_FIFO_WIDTH_BITS; + + if (!console) { + port->rx_fifo = devm_kcalloc(uport->dev, + port->rx_fifo_depth, sizeof(u32), GFP_KERNEL); + if (!port->rx_fifo) + return -ENOMEM; + } + + ret = geni_icc_get(&port->se, NULL); + if (ret) + return ret; + port->se.icc_paths[GENI_TO_CORE].avg_bw = GENI_DEFAULT_BW; + port->se.icc_paths[CPU_TO_GENI].avg_bw = GENI_DEFAULT_BW; + + /* Set BW for register access */ + ret = geni_icc_set_bw(&port->se); + if (ret) + return ret; + + port->name = devm_kasprintf(uport->dev, GFP_KERNEL, + "qcom_geni_serial_%s%d", + uart_console(uport) ? "console" : "uart", uport->line); + if (!port->name) + return -ENOMEM; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + uport->irq = irq; + uport->has_sysrq = IS_ENABLED(CONFIG_SERIAL_QCOM_GENI_CONSOLE); + + if (!console) + port->wakeup_irq = platform_get_irq_optional(pdev, 1); + + if (of_property_read_bool(pdev->dev.of_node, "rx-tx-swap")) + port->rx_tx_swap = true; + + if (of_property_read_bool(pdev->dev.of_node, "cts-rts-swap")) + port->cts_rts_swap = true; + + port->se.opp_table = dev_pm_opp_set_clkname(&pdev->dev, "se"); + if (IS_ERR(port->se.opp_table)) + return PTR_ERR(port->se.opp_table); + /* OPP table is optional */ + ret = dev_pm_opp_of_add_table(&pdev->dev); + if (ret && ret != -ENODEV) { + dev_err(&pdev->dev, "invalid OPP table in device tree\n"); + goto put_clkname; + } + + port->private_data.drv = drv; + uport->private_data = &port->private_data; + platform_set_drvdata(pdev, port); + port->handle_rx = console ? handle_rx_console : handle_rx_uart; + + ret = uart_add_one_port(drv, uport); + if (ret) + goto err; + + irq_set_status_flags(uport->irq, IRQ_NOAUTOEN); + ret = devm_request_irq(uport->dev, uport->irq, qcom_geni_serial_isr, + IRQF_TRIGGER_HIGH, port->name, uport); + if (ret) { + dev_err(uport->dev, "Failed to get IRQ ret %d\n", ret); + uart_remove_one_port(drv, uport); + goto err; + } + + if (port->wakeup_irq > 0) { + device_init_wakeup(&pdev->dev, true); + ret = dev_pm_set_dedicated_wake_irq(&pdev->dev, + port->wakeup_irq); + if (ret) { + device_init_wakeup(&pdev->dev, false); + uart_remove_one_port(drv, uport); + goto err; + } + } + + return 0; +err: + dev_pm_opp_of_remove_table(&pdev->dev); +put_clkname: + dev_pm_opp_put_clkname(port->se.opp_table); + return ret; +} + +static int qcom_geni_serial_remove(struct platform_device *pdev) +{ + struct qcom_geni_serial_port *port = platform_get_drvdata(pdev); + struct uart_driver *drv = port->private_data.drv; + + dev_pm_opp_of_remove_table(&pdev->dev); + dev_pm_opp_put_clkname(port->se.opp_table); + dev_pm_clear_wake_irq(&pdev->dev); + device_init_wakeup(&pdev->dev, false); + uart_remove_one_port(drv, &port->uport); + + return 0; +} + +static int __maybe_unused qcom_geni_serial_sys_suspend(struct device *dev) +{ + struct qcom_geni_serial_port *port = dev_get_drvdata(dev); + struct uart_port *uport = &port->uport; + struct qcom_geni_private_data *private_data = uport->private_data; + + /* + * This is done so we can hit the lowest possible state in suspend + * even with no_console_suspend + */ + if (uart_console(uport)) { + geni_icc_set_tag(&port->se, 0x3); + geni_icc_set_bw(&port->se); + } + return uart_suspend_port(private_data->drv, uport); +} + +static int __maybe_unused qcom_geni_serial_sys_resume(struct device *dev) +{ + int ret; + struct qcom_geni_serial_port *port = dev_get_drvdata(dev); + struct uart_port *uport = &port->uport; + struct qcom_geni_private_data *private_data = uport->private_data; + + ret = uart_resume_port(private_data->drv, uport); + if (uart_console(uport)) { + geni_icc_set_tag(&port->se, 0x7); + geni_icc_set_bw(&port->se); + } + return ret; +} + +static const struct dev_pm_ops qcom_geni_serial_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(qcom_geni_serial_sys_suspend, + qcom_geni_serial_sys_resume) +}; + +static const struct of_device_id qcom_geni_serial_match_table[] = { + { .compatible = "qcom,geni-debug-uart", }, + { .compatible = "qcom,geni-uart", }, + {} +}; +MODULE_DEVICE_TABLE(of, qcom_geni_serial_match_table); + +static struct platform_driver qcom_geni_serial_platform_driver = { + .remove = qcom_geni_serial_remove, + .probe = qcom_geni_serial_probe, + .driver = { + .name = "qcom_geni_serial", + .of_match_table = qcom_geni_serial_match_table, + .pm = &qcom_geni_serial_pm_ops, + }, +}; + +static int __init qcom_geni_serial_init(void) +{ + int ret; + + ret = console_register(&qcom_geni_console_driver); + if (ret) + return ret; + + ret = uart_register_driver(&qcom_geni_uart_driver); + if (ret) { + console_unregister(&qcom_geni_console_driver); + return ret; + } + + ret = platform_driver_register(&qcom_geni_serial_platform_driver); + if (ret) { + console_unregister(&qcom_geni_console_driver); + uart_unregister_driver(&qcom_geni_uart_driver); + } + return ret; +} +module_init(qcom_geni_serial_init); + +static void __exit qcom_geni_serial_exit(void) +{ + platform_driver_unregister(&qcom_geni_serial_platform_driver); + console_unregister(&qcom_geni_console_driver); + uart_unregister_driver(&qcom_geni_uart_driver); +} +module_exit(qcom_geni_serial_exit); + +MODULE_DESCRIPTION("Serial driver for GENI based QUP cores"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/rda-uart.c b/drivers/tty/serial/rda-uart.c new file mode 100644 index 000000000..a45069e7e --- /dev/null +++ b/drivers/tty/serial/rda-uart.c @@ -0,0 +1,831 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * RDA8810PL serial device driver + * + * Copyright RDA Microelectronics Company Limited + * Copyright (c) 2017 Andreas Färber + * Copyright (c) 2018 Manivannan Sadhasivam + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define RDA_UART_PORT_NUM 3 +#define RDA_UART_DEV_NAME "ttyRDA" + +#define RDA_UART_CTRL 0x00 +#define RDA_UART_STATUS 0x04 +#define RDA_UART_RXTX_BUFFER 0x08 +#define RDA_UART_IRQ_MASK 0x0c +#define RDA_UART_IRQ_CAUSE 0x10 +#define RDA_UART_IRQ_TRIGGERS 0x14 +#define RDA_UART_CMD_SET 0x18 +#define RDA_UART_CMD_CLR 0x1c + +/* UART_CTRL Bits */ +#define RDA_UART_ENABLE BIT(0) +#define RDA_UART_DBITS_8 BIT(1) +#define RDA_UART_TX_SBITS_2 BIT(2) +#define RDA_UART_PARITY_EN BIT(3) +#define RDA_UART_PARITY(x) (((x) & 0x3) << 4) +#define RDA_UART_PARITY_ODD RDA_UART_PARITY(0) +#define RDA_UART_PARITY_EVEN RDA_UART_PARITY(1) +#define RDA_UART_PARITY_SPACE RDA_UART_PARITY(2) +#define RDA_UART_PARITY_MARK RDA_UART_PARITY(3) +#define RDA_UART_DIV_MODE BIT(20) +#define RDA_UART_IRDA_EN BIT(21) +#define RDA_UART_DMA_EN BIT(22) +#define RDA_UART_FLOW_CNT_EN BIT(23) +#define RDA_UART_LOOP_BACK_EN BIT(24) +#define RDA_UART_RX_LOCK_ERR BIT(25) +#define RDA_UART_RX_BREAK_LEN(x) (((x) & 0xf) << 28) + +/* UART_STATUS Bits */ +#define RDA_UART_RX_FIFO(x) (((x) & 0x7f) << 0) +#define RDA_UART_RX_FIFO_MASK (0x7f << 0) +#define RDA_UART_TX_FIFO(x) (((x) & 0x1f) << 8) +#define RDA_UART_TX_FIFO_MASK (0x1f << 8) +#define RDA_UART_TX_ACTIVE BIT(14) +#define RDA_UART_RX_ACTIVE BIT(15) +#define RDA_UART_RX_OVERFLOW_ERR BIT(16) +#define RDA_UART_TX_OVERFLOW_ERR BIT(17) +#define RDA_UART_RX_PARITY_ERR BIT(18) +#define RDA_UART_RX_FRAMING_ERR BIT(19) +#define RDA_UART_RX_BREAK_INT BIT(20) +#define RDA_UART_DCTS BIT(24) +#define RDA_UART_CTS BIT(25) +#define RDA_UART_DTR BIT(28) +#define RDA_UART_CLK_ENABLED BIT(31) + +/* UART_RXTX_BUFFER Bits */ +#define RDA_UART_RX_DATA(x) (((x) & 0xff) << 0) +#define RDA_UART_TX_DATA(x) (((x) & 0xff) << 0) + +/* UART_IRQ_MASK Bits */ +#define RDA_UART_TX_MODEM_STATUS BIT(0) +#define RDA_UART_RX_DATA_AVAILABLE BIT(1) +#define RDA_UART_TX_DATA_NEEDED BIT(2) +#define RDA_UART_RX_TIMEOUT BIT(3) +#define RDA_UART_RX_LINE_ERR BIT(4) +#define RDA_UART_TX_DMA_DONE BIT(5) +#define RDA_UART_RX_DMA_DONE BIT(6) +#define RDA_UART_RX_DMA_TIMEOUT BIT(7) +#define RDA_UART_DTR_RISE BIT(8) +#define RDA_UART_DTR_FALL BIT(9) + +/* UART_IRQ_CAUSE Bits */ +#define RDA_UART_TX_MODEM_STATUS_U BIT(16) +#define RDA_UART_RX_DATA_AVAILABLE_U BIT(17) +#define RDA_UART_TX_DATA_NEEDED_U BIT(18) +#define RDA_UART_RX_TIMEOUT_U BIT(19) +#define RDA_UART_RX_LINE_ERR_U BIT(20) +#define RDA_UART_TX_DMA_DONE_U BIT(21) +#define RDA_UART_RX_DMA_DONE_U BIT(22) +#define RDA_UART_RX_DMA_TIMEOUT_U BIT(23) +#define RDA_UART_DTR_RISE_U BIT(24) +#define RDA_UART_DTR_FALL_U BIT(25) + +/* UART_TRIGGERS Bits */ +#define RDA_UART_RX_TRIGGER(x) (((x) & 0x1f) << 0) +#define RDA_UART_TX_TRIGGER(x) (((x) & 0xf) << 8) +#define RDA_UART_AFC_LEVEL(x) (((x) & 0x1f) << 16) + +/* UART_CMD_SET Bits */ +#define RDA_UART_RI BIT(0) +#define RDA_UART_DCD BIT(1) +#define RDA_UART_DSR BIT(2) +#define RDA_UART_TX_BREAK_CONTROL BIT(3) +#define RDA_UART_TX_FINISH_N_WAIT BIT(4) +#define RDA_UART_RTS BIT(5) +#define RDA_UART_RX_FIFO_RESET BIT(6) +#define RDA_UART_TX_FIFO_RESET BIT(7) + +#define RDA_UART_TX_FIFO_SIZE 16 + +static struct uart_driver rda_uart_driver; + +struct rda_uart_port { + struct uart_port port; + struct clk *clk; +}; + +#define to_rda_uart_port(port) container_of(port, struct rda_uart_port, port) + +static struct rda_uart_port *rda_uart_ports[RDA_UART_PORT_NUM]; + +static inline void rda_uart_write(struct uart_port *port, u32 val, + unsigned int off) +{ + writel(val, port->membase + off); +} + +static inline u32 rda_uart_read(struct uart_port *port, unsigned int off) +{ + return readl(port->membase + off); +} + +static unsigned int rda_uart_tx_empty(struct uart_port *port) +{ + unsigned long flags; + unsigned int ret; + u32 val; + + spin_lock_irqsave(&port->lock, flags); + + val = rda_uart_read(port, RDA_UART_STATUS); + ret = (val & RDA_UART_TX_FIFO_MASK) ? TIOCSER_TEMT : 0; + + spin_unlock_irqrestore(&port->lock, flags); + + return ret; +} + +static unsigned int rda_uart_get_mctrl(struct uart_port *port) +{ + unsigned int mctrl = 0; + u32 cmd_set, status; + + cmd_set = rda_uart_read(port, RDA_UART_CMD_SET); + status = rda_uart_read(port, RDA_UART_STATUS); + if (cmd_set & RDA_UART_RTS) + mctrl |= TIOCM_RTS; + if (!(status & RDA_UART_CTS)) + mctrl |= TIOCM_CTS; + + return mctrl; +} + +static void rda_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + u32 val; + + if (mctrl & TIOCM_RTS) { + val = rda_uart_read(port, RDA_UART_CMD_SET); + rda_uart_write(port, (val | RDA_UART_RTS), RDA_UART_CMD_SET); + } else { + /* Clear RTS to stop to receive. */ + val = rda_uart_read(port, RDA_UART_CMD_CLR); + rda_uart_write(port, (val | RDA_UART_RTS), RDA_UART_CMD_CLR); + } + + val = rda_uart_read(port, RDA_UART_CTRL); + + if (mctrl & TIOCM_LOOP) + val |= RDA_UART_LOOP_BACK_EN; + else + val &= ~RDA_UART_LOOP_BACK_EN; + + rda_uart_write(port, val, RDA_UART_CTRL); +} + +static void rda_uart_stop_tx(struct uart_port *port) +{ + u32 val; + + val = rda_uart_read(port, RDA_UART_IRQ_MASK); + val &= ~RDA_UART_TX_DATA_NEEDED; + rda_uart_write(port, val, RDA_UART_IRQ_MASK); + + val = rda_uart_read(port, RDA_UART_CMD_SET); + val |= RDA_UART_TX_FIFO_RESET; + rda_uart_write(port, val, RDA_UART_CMD_SET); +} + +static void rda_uart_stop_rx(struct uart_port *port) +{ + u32 val; + + val = rda_uart_read(port, RDA_UART_IRQ_MASK); + val &= ~(RDA_UART_RX_DATA_AVAILABLE | RDA_UART_RX_TIMEOUT); + rda_uart_write(port, val, RDA_UART_IRQ_MASK); + + /* Read Rx buffer before reset to avoid Rx timeout interrupt */ + val = rda_uart_read(port, RDA_UART_RXTX_BUFFER); + + val = rda_uart_read(port, RDA_UART_CMD_SET); + val |= RDA_UART_RX_FIFO_RESET; + rda_uart_write(port, val, RDA_UART_CMD_SET); +} + +static void rda_uart_start_tx(struct uart_port *port) +{ + u32 val; + + if (uart_tx_stopped(port)) { + rda_uart_stop_tx(port); + return; + } + + val = rda_uart_read(port, RDA_UART_IRQ_MASK); + val |= RDA_UART_TX_DATA_NEEDED; + rda_uart_write(port, val, RDA_UART_IRQ_MASK); +} + +static void rda_uart_change_baudrate(struct rda_uart_port *rda_port, + unsigned long baud) +{ + clk_set_rate(rda_port->clk, baud * 8); +} + +static void rda_uart_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + struct rda_uart_port *rda_port = to_rda_uart_port(port); + unsigned long flags; + unsigned int ctrl, cmd_set, cmd_clr, triggers; + unsigned int baud; + u32 irq_mask; + + spin_lock_irqsave(&port->lock, flags); + + baud = uart_get_baud_rate(port, termios, old, 9600, port->uartclk / 4); + rda_uart_change_baudrate(rda_port, baud); + + ctrl = rda_uart_read(port, RDA_UART_CTRL); + cmd_set = rda_uart_read(port, RDA_UART_CMD_SET); + cmd_clr = rda_uart_read(port, RDA_UART_CMD_CLR); + + switch (termios->c_cflag & CSIZE) { + case CS5: + case CS6: + dev_warn(port->dev, "bit size not supported, using 7 bits\n"); + fallthrough; + case CS7: + ctrl &= ~RDA_UART_DBITS_8; + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= CS7; + break; + default: + ctrl |= RDA_UART_DBITS_8; + break; + } + + /* stop bits */ + if (termios->c_cflag & CSTOPB) + ctrl |= RDA_UART_TX_SBITS_2; + else + ctrl &= ~RDA_UART_TX_SBITS_2; + + /* parity check */ + if (termios->c_cflag & PARENB) { + ctrl |= RDA_UART_PARITY_EN; + + /* Mark or Space parity */ + if (termios->c_cflag & CMSPAR) { + if (termios->c_cflag & PARODD) + ctrl |= RDA_UART_PARITY_MARK; + else + ctrl |= RDA_UART_PARITY_SPACE; + } else if (termios->c_cflag & PARODD) { + ctrl |= RDA_UART_PARITY_ODD; + } else { + ctrl |= RDA_UART_PARITY_EVEN; + } + } else { + ctrl &= ~RDA_UART_PARITY_EN; + } + + /* Hardware handshake (RTS/CTS) */ + if (termios->c_cflag & CRTSCTS) { + ctrl |= RDA_UART_FLOW_CNT_EN; + cmd_set |= RDA_UART_RTS; + } else { + ctrl &= ~RDA_UART_FLOW_CNT_EN; + cmd_clr |= RDA_UART_RTS; + } + + ctrl |= RDA_UART_ENABLE; + ctrl &= ~RDA_UART_DMA_EN; + + triggers = (RDA_UART_AFC_LEVEL(20) | RDA_UART_RX_TRIGGER(16)); + irq_mask = rda_uart_read(port, RDA_UART_IRQ_MASK); + rda_uart_write(port, 0, RDA_UART_IRQ_MASK); + + rda_uart_write(port, triggers, RDA_UART_IRQ_TRIGGERS); + rda_uart_write(port, ctrl, RDA_UART_CTRL); + rda_uart_write(port, cmd_set, RDA_UART_CMD_SET); + rda_uart_write(port, cmd_clr, RDA_UART_CMD_CLR); + + rda_uart_write(port, irq_mask, RDA_UART_IRQ_MASK); + + /* Don't rewrite B0 */ + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, baud, baud); + + /* update the per-port timeout */ + uart_update_timeout(port, termios->c_cflag, baud); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void rda_uart_send_chars(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + unsigned int ch; + u32 val; + + if (uart_tx_stopped(port)) + return; + + if (port->x_char) { + while (!(rda_uart_read(port, RDA_UART_STATUS) & + RDA_UART_TX_FIFO_MASK)) + cpu_relax(); + + rda_uart_write(port, port->x_char, RDA_UART_RXTX_BUFFER); + port->icount.tx++; + port->x_char = 0; + } + + while (rda_uart_read(port, RDA_UART_STATUS) & RDA_UART_TX_FIFO_MASK) { + if (uart_circ_empty(xmit)) + break; + + ch = xmit->buf[xmit->tail]; + rda_uart_write(port, ch, RDA_UART_RXTX_BUFFER); + xmit->tail = (xmit->tail + 1) & (SERIAL_XMIT_SIZE - 1); + port->icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (!uart_circ_empty(xmit)) { + /* Re-enable Tx FIFO interrupt */ + val = rda_uart_read(port, RDA_UART_IRQ_MASK); + val |= RDA_UART_TX_DATA_NEEDED; + rda_uart_write(port, val, RDA_UART_IRQ_MASK); + } +} + +static void rda_uart_receive_chars(struct uart_port *port) +{ + u32 status, val; + + status = rda_uart_read(port, RDA_UART_STATUS); + while ((status & RDA_UART_RX_FIFO_MASK)) { + char flag = TTY_NORMAL; + + if (status & RDA_UART_RX_PARITY_ERR) { + port->icount.parity++; + flag = TTY_PARITY; + } + + if (status & RDA_UART_RX_FRAMING_ERR) { + port->icount.frame++; + flag = TTY_FRAME; + } + + if (status & RDA_UART_RX_OVERFLOW_ERR) { + port->icount.overrun++; + flag = TTY_OVERRUN; + } + + val = rda_uart_read(port, RDA_UART_RXTX_BUFFER); + val &= 0xff; + + port->icount.rx++; + tty_insert_flip_char(&port->state->port, val, flag); + + status = rda_uart_read(port, RDA_UART_STATUS); + } + + spin_unlock(&port->lock); + tty_flip_buffer_push(&port->state->port); + spin_lock(&port->lock); +} + +static irqreturn_t rda_interrupt(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + unsigned long flags; + u32 val, irq_mask; + + spin_lock_irqsave(&port->lock, flags); + + /* Clear IRQ cause */ + val = rda_uart_read(port, RDA_UART_IRQ_CAUSE); + rda_uart_write(port, val, RDA_UART_IRQ_CAUSE); + + if (val & (RDA_UART_RX_DATA_AVAILABLE | RDA_UART_RX_TIMEOUT)) + rda_uart_receive_chars(port); + + if (val & (RDA_UART_TX_DATA_NEEDED)) { + irq_mask = rda_uart_read(port, RDA_UART_IRQ_MASK); + irq_mask &= ~RDA_UART_TX_DATA_NEEDED; + rda_uart_write(port, irq_mask, RDA_UART_IRQ_MASK); + + rda_uart_send_chars(port); + } + + spin_unlock_irqrestore(&port->lock, flags); + + return IRQ_HANDLED; +} + +static int rda_uart_startup(struct uart_port *port) +{ + unsigned long flags; + int ret; + u32 val; + + spin_lock_irqsave(&port->lock, flags); + rda_uart_write(port, 0, RDA_UART_IRQ_MASK); + spin_unlock_irqrestore(&port->lock, flags); + + ret = request_irq(port->irq, rda_interrupt, IRQF_NO_SUSPEND, + "rda-uart", port); + if (ret) + return ret; + + spin_lock_irqsave(&port->lock, flags); + + val = rda_uart_read(port, RDA_UART_CTRL); + val |= RDA_UART_ENABLE; + rda_uart_write(port, val, RDA_UART_CTRL); + + /* enable rx interrupt */ + val = rda_uart_read(port, RDA_UART_IRQ_MASK); + val |= (RDA_UART_RX_DATA_AVAILABLE | RDA_UART_RX_TIMEOUT); + rda_uart_write(port, val, RDA_UART_IRQ_MASK); + + spin_unlock_irqrestore(&port->lock, flags); + + return 0; +} + +static void rda_uart_shutdown(struct uart_port *port) +{ + unsigned long flags; + u32 val; + + spin_lock_irqsave(&port->lock, flags); + + rda_uart_stop_tx(port); + rda_uart_stop_rx(port); + + val = rda_uart_read(port, RDA_UART_CTRL); + val &= ~RDA_UART_ENABLE; + rda_uart_write(port, val, RDA_UART_CTRL); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *rda_uart_type(struct uart_port *port) +{ + return (port->type == PORT_RDA) ? "rda-uart" : NULL; +} + +static int rda_uart_request_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + struct resource *res; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENXIO; + + if (!devm_request_mem_region(port->dev, port->mapbase, + resource_size(res), dev_name(port->dev))) + return -EBUSY; + + if (port->flags & UPF_IOREMAP) { + port->membase = devm_ioremap(port->dev, port->mapbase, + resource_size(res)); + if (!port->membase) + return -EBUSY; + } + + return 0; +} + +static void rda_uart_config_port(struct uart_port *port, int flags) +{ + unsigned long irq_flags; + + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_RDA; + rda_uart_request_port(port); + } + + spin_lock_irqsave(&port->lock, irq_flags); + + /* Clear mask, so no surprise interrupts. */ + rda_uart_write(port, 0, RDA_UART_IRQ_MASK); + + /* Clear status register */ + rda_uart_write(port, 0, RDA_UART_STATUS); + + spin_unlock_irqrestore(&port->lock, irq_flags); +} + +static void rda_uart_release_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + struct resource *res; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return; + + if (port->flags & UPF_IOREMAP) { + devm_release_mem_region(port->dev, port->mapbase, + resource_size(res)); + devm_iounmap(port->dev, port->membase); + port->membase = NULL; + } +} + +static int rda_uart_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + if (port->type != PORT_RDA) + return -EINVAL; + + if (port->irq != ser->irq) + return -EINVAL; + + return 0; +} + +static const struct uart_ops rda_uart_ops = { + .tx_empty = rda_uart_tx_empty, + .get_mctrl = rda_uart_get_mctrl, + .set_mctrl = rda_uart_set_mctrl, + .start_tx = rda_uart_start_tx, + .stop_tx = rda_uart_stop_tx, + .stop_rx = rda_uart_stop_rx, + .startup = rda_uart_startup, + .shutdown = rda_uart_shutdown, + .set_termios = rda_uart_set_termios, + .type = rda_uart_type, + .request_port = rda_uart_request_port, + .release_port = rda_uart_release_port, + .config_port = rda_uart_config_port, + .verify_port = rda_uart_verify_port, +}; + +#ifdef CONFIG_SERIAL_RDA_CONSOLE + +static void rda_console_putchar(struct uart_port *port, int ch) +{ + if (!port->membase) + return; + + while (!(rda_uart_read(port, RDA_UART_STATUS) & RDA_UART_TX_FIFO_MASK)) + cpu_relax(); + + rda_uart_write(port, ch, RDA_UART_RXTX_BUFFER); +} + +static void rda_uart_port_write(struct uart_port *port, const char *s, + u_int count) +{ + u32 old_irq_mask; + unsigned long flags; + int locked; + + local_irq_save(flags); + + if (port->sysrq) { + locked = 0; + } else if (oops_in_progress) { + locked = spin_trylock(&port->lock); + } else { + spin_lock(&port->lock); + locked = 1; + } + + old_irq_mask = rda_uart_read(port, RDA_UART_IRQ_MASK); + rda_uart_write(port, 0, RDA_UART_IRQ_MASK); + + uart_console_write(port, s, count, rda_console_putchar); + + /* wait until all contents have been sent out */ + while (!(rda_uart_read(port, RDA_UART_STATUS) & RDA_UART_TX_FIFO_MASK)) + cpu_relax(); + + rda_uart_write(port, old_irq_mask, RDA_UART_IRQ_MASK); + + if (locked) + spin_unlock(&port->lock); + + local_irq_restore(flags); +} + +static void rda_uart_console_write(struct console *co, const char *s, + u_int count) +{ + struct rda_uart_port *rda_port; + + rda_port = rda_uart_ports[co->index]; + if (!rda_port) + return; + + rda_uart_port_write(&rda_port->port, s, count); +} + +static int rda_uart_console_setup(struct console *co, char *options) +{ + struct rda_uart_port *rda_port; + int baud = 921600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index < 0 || co->index >= RDA_UART_PORT_NUM) + return -EINVAL; + + rda_port = rda_uart_ports[co->index]; + if (!rda_port || !rda_port->port.membase) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&rda_port->port, co, baud, parity, bits, flow); +} + +static struct console rda_uart_console = { + .name = RDA_UART_DEV_NAME, + .write = rda_uart_console_write, + .device = uart_console_device, + .setup = rda_uart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &rda_uart_driver, +}; + +static int __init rda_uart_console_init(void) +{ + register_console(&rda_uart_console); + + return 0; +} +console_initcall(rda_uart_console_init); + +static void rda_uart_early_console_write(struct console *co, + const char *s, + u_int count) +{ + struct earlycon_device *dev = co->data; + + rda_uart_port_write(&dev->port, s, count); +} + +static int __init +rda_uart_early_console_setup(struct earlycon_device *device, const char *opt) +{ + if (!device->port.membase) + return -ENODEV; + + device->con->write = rda_uart_early_console_write; + + return 0; +} + +OF_EARLYCON_DECLARE(rda, "rda,8810pl-uart", + rda_uart_early_console_setup); + +#define RDA_UART_CONSOLE (&rda_uart_console) +#else +#define RDA_UART_CONSOLE NULL +#endif /* CONFIG_SERIAL_RDA_CONSOLE */ + +static struct uart_driver rda_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "rda-uart", + .dev_name = RDA_UART_DEV_NAME, + .nr = RDA_UART_PORT_NUM, + .cons = RDA_UART_CONSOLE, +}; + +static const struct of_device_id rda_uart_dt_matches[] = { + { .compatible = "rda,8810pl-uart" }, + { } +}; +MODULE_DEVICE_TABLE(of, rda_uart_dt_matches); + +static int rda_uart_probe(struct platform_device *pdev) +{ + struct resource *res_mem; + struct rda_uart_port *rda_port; + int ret, irq; + + if (pdev->dev.of_node) + pdev->id = of_alias_get_id(pdev->dev.of_node, "serial"); + + if (pdev->id < 0 || pdev->id >= RDA_UART_PORT_NUM) { + dev_err(&pdev->dev, "id %d out of range\n", pdev->id); + return -EINVAL; + } + + res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res_mem) { + dev_err(&pdev->dev, "could not get mem\n"); + return -ENODEV; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + if (rda_uart_ports[pdev->id]) { + dev_err(&pdev->dev, "port %d already allocated\n", pdev->id); + return -EBUSY; + } + + rda_port = devm_kzalloc(&pdev->dev, sizeof(*rda_port), GFP_KERNEL); + if (!rda_port) + return -ENOMEM; + + rda_port->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(rda_port->clk)) { + dev_err(&pdev->dev, "could not get clk\n"); + return PTR_ERR(rda_port->clk); + } + + rda_port->port.dev = &pdev->dev; + rda_port->port.regshift = 0; + rda_port->port.line = pdev->id; + rda_port->port.type = PORT_RDA; + rda_port->port.iotype = UPIO_MEM; + rda_port->port.mapbase = res_mem->start; + rda_port->port.irq = irq; + rda_port->port.uartclk = clk_get_rate(rda_port->clk); + if (rda_port->port.uartclk == 0) { + dev_err(&pdev->dev, "clock rate is zero\n"); + return -EINVAL; + } + rda_port->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP | + UPF_LOW_LATENCY; + rda_port->port.x_char = 0; + rda_port->port.fifosize = RDA_UART_TX_FIFO_SIZE; + rda_port->port.ops = &rda_uart_ops; + + rda_uart_ports[pdev->id] = rda_port; + platform_set_drvdata(pdev, rda_port); + + ret = uart_add_one_port(&rda_uart_driver, &rda_port->port); + if (ret) + rda_uart_ports[pdev->id] = NULL; + + return ret; +} + +static int rda_uart_remove(struct platform_device *pdev) +{ + struct rda_uart_port *rda_port = platform_get_drvdata(pdev); + + uart_remove_one_port(&rda_uart_driver, &rda_port->port); + rda_uart_ports[pdev->id] = NULL; + + return 0; +} + +static struct platform_driver rda_uart_platform_driver = { + .probe = rda_uart_probe, + .remove = rda_uart_remove, + .driver = { + .name = "rda-uart", + .of_match_table = rda_uart_dt_matches, + }, +}; + +static int __init rda_uart_init(void) +{ + int ret; + + ret = uart_register_driver(&rda_uart_driver); + if (ret) + return ret; + + ret = platform_driver_register(&rda_uart_platform_driver); + if (ret) + uart_unregister_driver(&rda_uart_driver); + + return ret; +} + +static void __exit rda_uart_exit(void) +{ + platform_driver_unregister(&rda_uart_platform_driver); + uart_unregister_driver(&rda_uart_driver); +} + +module_init(rda_uart_init); +module_exit(rda_uart_exit); + +MODULE_AUTHOR("Manivannan Sadhasivam "); +MODULE_DESCRIPTION("RDA8810PL serial device driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/rp2.c b/drivers/tty/serial/rp2.c new file mode 100644 index 000000000..944a4c010 --- /dev/null +++ b/drivers/tty/serial/rp2.c @@ -0,0 +1,866 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for Comtrol RocketPort EXPRESS/INFINITY cards + * + * Copyright (C) 2012 Kevin Cernekee + * + * Inspired by, and loosely based on: + * + * ar933x_uart.c + * Copyright (C) 2011 Gabor Juhos + * + * rocketport_infinity_express-linux-1.20.tar.gz + * Copyright (C) 2004-2011 Comtrol, Inc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "rp2" + +#define RP2_FW_NAME "rp2.fw" +#define RP2_UCODE_BYTES 0x3f + +#define PORTS_PER_ASIC 16 +#define ALL_PORTS_MASK (BIT(PORTS_PER_ASIC) - 1) + +#define UART_CLOCK 44236800 +#define DEFAULT_BAUD_DIV (UART_CLOCK / (9600 * 16)) +#define FIFO_SIZE 512 + +/* BAR0 registers */ +#define RP2_FPGA_CTL0 0x110 +#define RP2_FPGA_CTL1 0x11c +#define RP2_IRQ_MASK 0x1ec +#define RP2_IRQ_MASK_EN_m BIT(0) +#define RP2_IRQ_STATUS 0x1f0 + +/* BAR1 registers */ +#define RP2_ASIC_SPACING 0x1000 +#define RP2_ASIC_OFFSET(i) ((i) << ilog2(RP2_ASIC_SPACING)) + +#define RP2_PORT_BASE 0x000 +#define RP2_PORT_SPACING 0x040 + +#define RP2_UCODE_BASE 0x400 +#define RP2_UCODE_SPACING 0x80 + +#define RP2_CLK_PRESCALER 0xc00 +#define RP2_CH_IRQ_STAT 0xc04 +#define RP2_CH_IRQ_MASK 0xc08 +#define RP2_ASIC_IRQ 0xd00 +#define RP2_ASIC_IRQ_EN_m BIT(20) +#define RP2_GLOBAL_CMD 0xd0c +#define RP2_ASIC_CFG 0xd04 + +/* port registers */ +#define RP2_DATA_DWORD 0x000 + +#define RP2_DATA_BYTE 0x008 +#define RP2_DATA_BYTE_ERR_PARITY_m BIT(8) +#define RP2_DATA_BYTE_ERR_OVERRUN_m BIT(9) +#define RP2_DATA_BYTE_ERR_FRAMING_m BIT(10) +#define RP2_DATA_BYTE_BREAK_m BIT(11) + +/* This lets uart_insert_char() drop bytes received on a !CREAD port */ +#define RP2_DUMMY_READ BIT(16) + +#define RP2_DATA_BYTE_EXCEPTION_MASK (RP2_DATA_BYTE_ERR_PARITY_m | \ + RP2_DATA_BYTE_ERR_OVERRUN_m | \ + RP2_DATA_BYTE_ERR_FRAMING_m | \ + RP2_DATA_BYTE_BREAK_m) + +#define RP2_RX_FIFO_COUNT 0x00c +#define RP2_TX_FIFO_COUNT 0x00e + +#define RP2_CHAN_STAT 0x010 +#define RP2_CHAN_STAT_RXDATA_m BIT(0) +#define RP2_CHAN_STAT_DCD_m BIT(3) +#define RP2_CHAN_STAT_DSR_m BIT(4) +#define RP2_CHAN_STAT_CTS_m BIT(5) +#define RP2_CHAN_STAT_RI_m BIT(6) +#define RP2_CHAN_STAT_OVERRUN_m BIT(13) +#define RP2_CHAN_STAT_DSR_CHANGED_m BIT(16) +#define RP2_CHAN_STAT_CTS_CHANGED_m BIT(17) +#define RP2_CHAN_STAT_CD_CHANGED_m BIT(18) +#define RP2_CHAN_STAT_RI_CHANGED_m BIT(22) +#define RP2_CHAN_STAT_TXEMPTY_m BIT(25) + +#define RP2_CHAN_STAT_MS_CHANGED_MASK (RP2_CHAN_STAT_DSR_CHANGED_m | \ + RP2_CHAN_STAT_CTS_CHANGED_m | \ + RP2_CHAN_STAT_CD_CHANGED_m | \ + RP2_CHAN_STAT_RI_CHANGED_m) + +#define RP2_TXRX_CTL 0x014 +#define RP2_TXRX_CTL_MSRIRQ_m BIT(0) +#define RP2_TXRX_CTL_RXIRQ_m BIT(2) +#define RP2_TXRX_CTL_RX_TRIG_s 3 +#define RP2_TXRX_CTL_RX_TRIG_m (0x3 << RP2_TXRX_CTL_RX_TRIG_s) +#define RP2_TXRX_CTL_RX_TRIG_1 (0x1 << RP2_TXRX_CTL_RX_TRIG_s) +#define RP2_TXRX_CTL_RX_TRIG_256 (0x2 << RP2_TXRX_CTL_RX_TRIG_s) +#define RP2_TXRX_CTL_RX_TRIG_448 (0x3 << RP2_TXRX_CTL_RX_TRIG_s) +#define RP2_TXRX_CTL_RX_EN_m BIT(5) +#define RP2_TXRX_CTL_RTSFLOW_m BIT(6) +#define RP2_TXRX_CTL_DTRFLOW_m BIT(7) +#define RP2_TXRX_CTL_TX_TRIG_s 16 +#define RP2_TXRX_CTL_TX_TRIG_m (0x3 << RP2_TXRX_CTL_RX_TRIG_s) +#define RP2_TXRX_CTL_DSRFLOW_m BIT(18) +#define RP2_TXRX_CTL_TXIRQ_m BIT(19) +#define RP2_TXRX_CTL_CTSFLOW_m BIT(23) +#define RP2_TXRX_CTL_TX_EN_m BIT(24) +#define RP2_TXRX_CTL_RTS_m BIT(25) +#define RP2_TXRX_CTL_DTR_m BIT(26) +#define RP2_TXRX_CTL_LOOP_m BIT(27) +#define RP2_TXRX_CTL_BREAK_m BIT(28) +#define RP2_TXRX_CTL_CMSPAR_m BIT(29) +#define RP2_TXRX_CTL_nPARODD_m BIT(30) +#define RP2_TXRX_CTL_PARENB_m BIT(31) + +#define RP2_UART_CTL 0x018 +#define RP2_UART_CTL_MODE_s 0 +#define RP2_UART_CTL_MODE_m (0x7 << RP2_UART_CTL_MODE_s) +#define RP2_UART_CTL_MODE_rs232 (0x1 << RP2_UART_CTL_MODE_s) +#define RP2_UART_CTL_FLUSH_RX_m BIT(3) +#define RP2_UART_CTL_FLUSH_TX_m BIT(4) +#define RP2_UART_CTL_RESET_CH_m BIT(5) +#define RP2_UART_CTL_XMIT_EN_m BIT(6) +#define RP2_UART_CTL_DATABITS_s 8 +#define RP2_UART_CTL_DATABITS_m (0x3 << RP2_UART_CTL_DATABITS_s) +#define RP2_UART_CTL_DATABITS_8 (0x3 << RP2_UART_CTL_DATABITS_s) +#define RP2_UART_CTL_DATABITS_7 (0x2 << RP2_UART_CTL_DATABITS_s) +#define RP2_UART_CTL_DATABITS_6 (0x1 << RP2_UART_CTL_DATABITS_s) +#define RP2_UART_CTL_DATABITS_5 (0x0 << RP2_UART_CTL_DATABITS_s) +#define RP2_UART_CTL_STOPBITS_m BIT(10) + +#define RP2_BAUD 0x01c + +/* ucode registers */ +#define RP2_TX_SWFLOW 0x02 +#define RP2_TX_SWFLOW_ena 0x81 +#define RP2_TX_SWFLOW_dis 0x9d + +#define RP2_RX_SWFLOW 0x0c +#define RP2_RX_SWFLOW_ena 0x81 +#define RP2_RX_SWFLOW_dis 0x8d + +#define RP2_RX_FIFO 0x37 +#define RP2_RX_FIFO_ena 0x08 +#define RP2_RX_FIFO_dis 0x81 + +static struct uart_driver rp2_uart_driver = { + .owner = THIS_MODULE, + .driver_name = DRV_NAME, + .dev_name = "ttyRP", + .nr = CONFIG_SERIAL_RP2_NR_UARTS, +}; + +struct rp2_card; + +struct rp2_uart_port { + struct uart_port port; + int idx; + int ignore_rx; + struct rp2_card *card; + void __iomem *asic_base; + void __iomem *base; + void __iomem *ucode; +}; + +struct rp2_card { + struct pci_dev *pdev; + struct rp2_uart_port *ports; + int n_ports; + int initialized_ports; + int minor_start; + int smpte; + void __iomem *bar0; + void __iomem *bar1; + spinlock_t card_lock; +}; + +#define RP_ID(prod) PCI_VDEVICE(RP, (prod)) +#define RP_CAP(ports, smpte) (((ports) << 8) | ((smpte) << 0)) + +static inline void rp2_decode_cap(const struct pci_device_id *id, + int *ports, int *smpte) +{ + *ports = id->driver_data >> 8; + *smpte = id->driver_data & 0xff; +} + +static DEFINE_SPINLOCK(rp2_minor_lock); +static int rp2_minor_next; + +static int rp2_alloc_ports(int n_ports) +{ + int ret = -ENOSPC; + + spin_lock(&rp2_minor_lock); + if (rp2_minor_next + n_ports <= CONFIG_SERIAL_RP2_NR_UARTS) { + /* sorry, no support for hot unplugging individual cards */ + ret = rp2_minor_next; + rp2_minor_next += n_ports; + } + spin_unlock(&rp2_minor_lock); + + return ret; +} + +static inline struct rp2_uart_port *port_to_up(struct uart_port *port) +{ + return container_of(port, struct rp2_uart_port, port); +} + +static void rp2_rmw(struct rp2_uart_port *up, int reg, + u32 clr_bits, u32 set_bits) +{ + u32 tmp = readl(up->base + reg); + tmp &= ~clr_bits; + tmp |= set_bits; + writel(tmp, up->base + reg); +} + +static void rp2_rmw_clr(struct rp2_uart_port *up, int reg, u32 val) +{ + rp2_rmw(up, reg, val, 0); +} + +static void rp2_rmw_set(struct rp2_uart_port *up, int reg, u32 val) +{ + rp2_rmw(up, reg, 0, val); +} + +static void rp2_mask_ch_irq(struct rp2_uart_port *up, int ch_num, + int is_enabled) +{ + unsigned long flags, irq_mask; + + spin_lock_irqsave(&up->card->card_lock, flags); + + irq_mask = readl(up->asic_base + RP2_CH_IRQ_MASK); + if (is_enabled) + irq_mask &= ~BIT(ch_num); + else + irq_mask |= BIT(ch_num); + writel(irq_mask, up->asic_base + RP2_CH_IRQ_MASK); + + spin_unlock_irqrestore(&up->card->card_lock, flags); +} + +static unsigned int rp2_uart_tx_empty(struct uart_port *port) +{ + struct rp2_uart_port *up = port_to_up(port); + unsigned long tx_fifo_bytes, flags; + + /* + * This should probably check the transmitter, not the FIFO. + * But the TXEMPTY bit doesn't seem to work unless the TX IRQ is + * enabled. + */ + spin_lock_irqsave(&up->port.lock, flags); + tx_fifo_bytes = readw(up->base + RP2_TX_FIFO_COUNT); + spin_unlock_irqrestore(&up->port.lock, flags); + + return tx_fifo_bytes ? 0 : TIOCSER_TEMT; +} + +static unsigned int rp2_uart_get_mctrl(struct uart_port *port) +{ + struct rp2_uart_port *up = port_to_up(port); + u32 status; + + status = readl(up->base + RP2_CHAN_STAT); + return ((status & RP2_CHAN_STAT_DCD_m) ? TIOCM_CAR : 0) | + ((status & RP2_CHAN_STAT_DSR_m) ? TIOCM_DSR : 0) | + ((status & RP2_CHAN_STAT_CTS_m) ? TIOCM_CTS : 0) | + ((status & RP2_CHAN_STAT_RI_m) ? TIOCM_RI : 0); +} + +static void rp2_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + rp2_rmw(port_to_up(port), RP2_TXRX_CTL, + RP2_TXRX_CTL_DTR_m | RP2_TXRX_CTL_RTS_m | RP2_TXRX_CTL_LOOP_m, + ((mctrl & TIOCM_DTR) ? RP2_TXRX_CTL_DTR_m : 0) | + ((mctrl & TIOCM_RTS) ? RP2_TXRX_CTL_RTS_m : 0) | + ((mctrl & TIOCM_LOOP) ? RP2_TXRX_CTL_LOOP_m : 0)); +} + +static void rp2_uart_start_tx(struct uart_port *port) +{ + rp2_rmw_set(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_TXIRQ_m); +} + +static void rp2_uart_stop_tx(struct uart_port *port) +{ + rp2_rmw_clr(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_TXIRQ_m); +} + +static void rp2_uart_stop_rx(struct uart_port *port) +{ + rp2_rmw_clr(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_RXIRQ_m); +} + +static void rp2_uart_break_ctl(struct uart_port *port, int break_state) +{ + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + rp2_rmw(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_BREAK_m, + break_state ? RP2_TXRX_CTL_BREAK_m : 0); + spin_unlock_irqrestore(&port->lock, flags); +} + +static void rp2_uart_enable_ms(struct uart_port *port) +{ + rp2_rmw_set(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_MSRIRQ_m); +} + +static void __rp2_uart_set_termios(struct rp2_uart_port *up, + unsigned long cfl, + unsigned long ifl, + unsigned int baud_div) +{ + /* baud rate divisor (calculated elsewhere). 0 = divide-by-1 */ + writew(baud_div - 1, up->base + RP2_BAUD); + + /* data bits and stop bits */ + rp2_rmw(up, RP2_UART_CTL, + RP2_UART_CTL_STOPBITS_m | RP2_UART_CTL_DATABITS_m, + ((cfl & CSTOPB) ? RP2_UART_CTL_STOPBITS_m : 0) | + (((cfl & CSIZE) == CS8) ? RP2_UART_CTL_DATABITS_8 : 0) | + (((cfl & CSIZE) == CS7) ? RP2_UART_CTL_DATABITS_7 : 0) | + (((cfl & CSIZE) == CS6) ? RP2_UART_CTL_DATABITS_6 : 0) | + (((cfl & CSIZE) == CS5) ? RP2_UART_CTL_DATABITS_5 : 0)); + + /* parity and hardware flow control */ + rp2_rmw(up, RP2_TXRX_CTL, + RP2_TXRX_CTL_PARENB_m | RP2_TXRX_CTL_nPARODD_m | + RP2_TXRX_CTL_CMSPAR_m | RP2_TXRX_CTL_DTRFLOW_m | + RP2_TXRX_CTL_DSRFLOW_m | RP2_TXRX_CTL_RTSFLOW_m | + RP2_TXRX_CTL_CTSFLOW_m, + ((cfl & PARENB) ? RP2_TXRX_CTL_PARENB_m : 0) | + ((cfl & PARODD) ? 0 : RP2_TXRX_CTL_nPARODD_m) | + ((cfl & CMSPAR) ? RP2_TXRX_CTL_CMSPAR_m : 0) | + ((cfl & CRTSCTS) ? (RP2_TXRX_CTL_RTSFLOW_m | + RP2_TXRX_CTL_CTSFLOW_m) : 0)); + + /* XON/XOFF software flow control */ + writeb((ifl & IXON) ? RP2_TX_SWFLOW_ena : RP2_TX_SWFLOW_dis, + up->ucode + RP2_TX_SWFLOW); + writeb((ifl & IXOFF) ? RP2_RX_SWFLOW_ena : RP2_RX_SWFLOW_dis, + up->ucode + RP2_RX_SWFLOW); +} + +static void rp2_uart_set_termios(struct uart_port *port, + struct ktermios *new, + struct ktermios *old) +{ + struct rp2_uart_port *up = port_to_up(port); + unsigned long flags; + unsigned int baud, baud_div; + + baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16); + baud_div = uart_get_divisor(port, baud); + + if (tty_termios_baud_rate(new)) + tty_termios_encode_baud_rate(new, baud, baud); + + spin_lock_irqsave(&port->lock, flags); + + /* ignore all characters if CREAD is not set */ + port->ignore_status_mask = (new->c_cflag & CREAD) ? 0 : RP2_DUMMY_READ; + + __rp2_uart_set_termios(up, new->c_cflag, new->c_iflag, baud_div); + uart_update_timeout(port, new->c_cflag, baud); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void rp2_rx_chars(struct rp2_uart_port *up) +{ + u16 bytes = readw(up->base + RP2_RX_FIFO_COUNT); + struct tty_port *port = &up->port.state->port; + + for (; bytes != 0; bytes--) { + u32 byte = readw(up->base + RP2_DATA_BYTE) | RP2_DUMMY_READ; + char ch = byte & 0xff; + + if (likely(!(byte & RP2_DATA_BYTE_EXCEPTION_MASK))) { + if (!uart_handle_sysrq_char(&up->port, ch)) + uart_insert_char(&up->port, byte, 0, ch, + TTY_NORMAL); + } else { + char flag = TTY_NORMAL; + + if (byte & RP2_DATA_BYTE_BREAK_m) + flag = TTY_BREAK; + else if (byte & RP2_DATA_BYTE_ERR_FRAMING_m) + flag = TTY_FRAME; + else if (byte & RP2_DATA_BYTE_ERR_PARITY_m) + flag = TTY_PARITY; + uart_insert_char(&up->port, byte, + RP2_DATA_BYTE_ERR_OVERRUN_m, ch, flag); + } + up->port.icount.rx++; + } + + spin_unlock(&up->port.lock); + tty_flip_buffer_push(port); + spin_lock(&up->port.lock); +} + +static void rp2_tx_chars(struct rp2_uart_port *up) +{ + u16 max_tx = FIFO_SIZE - readw(up->base + RP2_TX_FIFO_COUNT); + struct circ_buf *xmit = &up->port.state->xmit; + + if (uart_tx_stopped(&up->port)) { + rp2_uart_stop_tx(&up->port); + return; + } + + for (; max_tx != 0; max_tx--) { + if (up->port.x_char) { + writeb(up->port.x_char, up->base + RP2_DATA_BYTE); + up->port.x_char = 0; + up->port.icount.tx++; + continue; + } + if (uart_circ_empty(xmit)) { + rp2_uart_stop_tx(&up->port); + break; + } + writeb(xmit->buf[xmit->tail], up->base + RP2_DATA_BYTE); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); +} + +static void rp2_ch_interrupt(struct rp2_uart_port *up) +{ + u32 status; + + spin_lock(&up->port.lock); + + /* + * The IRQ status bits are clear-on-write. Other status bits in + * this register aren't, so it's harmless to write to them. + */ + status = readl(up->base + RP2_CHAN_STAT); + writel(status, up->base + RP2_CHAN_STAT); + + if (status & RP2_CHAN_STAT_RXDATA_m) + rp2_rx_chars(up); + if (status & RP2_CHAN_STAT_TXEMPTY_m) + rp2_tx_chars(up); + if (status & RP2_CHAN_STAT_MS_CHANGED_MASK) + wake_up_interruptible(&up->port.state->port.delta_msr_wait); + + spin_unlock(&up->port.lock); +} + +static int rp2_asic_interrupt(struct rp2_card *card, unsigned int asic_id) +{ + void __iomem *base = card->bar1 + RP2_ASIC_OFFSET(asic_id); + int ch, handled = 0; + unsigned long status = readl(base + RP2_CH_IRQ_STAT) & + ~readl(base + RP2_CH_IRQ_MASK); + + for_each_set_bit(ch, &status, PORTS_PER_ASIC) { + rp2_ch_interrupt(&card->ports[ch]); + handled++; + } + return handled; +} + +static irqreturn_t rp2_uart_interrupt(int irq, void *dev_id) +{ + struct rp2_card *card = dev_id; + int handled; + + handled = rp2_asic_interrupt(card, 0); + if (card->n_ports >= PORTS_PER_ASIC) + handled += rp2_asic_interrupt(card, 1); + + return handled ? IRQ_HANDLED : IRQ_NONE; +} + +static inline void rp2_flush_fifos(struct rp2_uart_port *up) +{ + rp2_rmw_set(up, RP2_UART_CTL, + RP2_UART_CTL_FLUSH_RX_m | RP2_UART_CTL_FLUSH_TX_m); + readl(up->base + RP2_UART_CTL); + udelay(10); + rp2_rmw_clr(up, RP2_UART_CTL, + RP2_UART_CTL_FLUSH_RX_m | RP2_UART_CTL_FLUSH_TX_m); +} + +static int rp2_uart_startup(struct uart_port *port) +{ + struct rp2_uart_port *up = port_to_up(port); + + rp2_flush_fifos(up); + rp2_rmw(up, RP2_TXRX_CTL, RP2_TXRX_CTL_MSRIRQ_m, RP2_TXRX_CTL_RXIRQ_m); + rp2_rmw(up, RP2_TXRX_CTL, RP2_TXRX_CTL_RX_TRIG_m, + RP2_TXRX_CTL_RX_TRIG_1); + rp2_rmw(up, RP2_CHAN_STAT, 0, 0); + rp2_mask_ch_irq(up, up->idx, 1); + + return 0; +} + +static void rp2_uart_shutdown(struct uart_port *port) +{ + struct rp2_uart_port *up = port_to_up(port); + unsigned long flags; + + rp2_uart_break_ctl(port, 0); + + spin_lock_irqsave(&port->lock, flags); + rp2_mask_ch_irq(up, up->idx, 0); + rp2_rmw(up, RP2_CHAN_STAT, 0, 0); + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *rp2_uart_type(struct uart_port *port) +{ + return (port->type == PORT_RP2) ? "RocketPort 2 UART" : NULL; +} + +static void rp2_uart_release_port(struct uart_port *port) +{ + /* Nothing to release ... */ +} + +static int rp2_uart_request_port(struct uart_port *port) +{ + /* UARTs always present */ + return 0; +} + +static void rp2_uart_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) + port->type = PORT_RP2; +} + +static int rp2_uart_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + if (ser->type != PORT_UNKNOWN && ser->type != PORT_RP2) + return -EINVAL; + + return 0; +} + +static const struct uart_ops rp2_uart_ops = { + .tx_empty = rp2_uart_tx_empty, + .set_mctrl = rp2_uart_set_mctrl, + .get_mctrl = rp2_uart_get_mctrl, + .stop_tx = rp2_uart_stop_tx, + .start_tx = rp2_uart_start_tx, + .stop_rx = rp2_uart_stop_rx, + .enable_ms = rp2_uart_enable_ms, + .break_ctl = rp2_uart_break_ctl, + .startup = rp2_uart_startup, + .shutdown = rp2_uart_shutdown, + .set_termios = rp2_uart_set_termios, + .type = rp2_uart_type, + .release_port = rp2_uart_release_port, + .request_port = rp2_uart_request_port, + .config_port = rp2_uart_config_port, + .verify_port = rp2_uart_verify_port, +}; + +static void rp2_reset_asic(struct rp2_card *card, unsigned int asic_id) +{ + void __iomem *base = card->bar1 + RP2_ASIC_OFFSET(asic_id); + u32 clk_cfg; + + writew(1, base + RP2_GLOBAL_CMD); + readw(base + RP2_GLOBAL_CMD); + msleep(100); + writel(0, base + RP2_CLK_PRESCALER); + + /* TDM clock configuration */ + clk_cfg = readw(base + RP2_ASIC_CFG); + clk_cfg = (clk_cfg & ~BIT(8)) | BIT(9); + writew(clk_cfg, base + RP2_ASIC_CFG); + + /* IRQ routing */ + writel(ALL_PORTS_MASK, base + RP2_CH_IRQ_MASK); + writel(RP2_ASIC_IRQ_EN_m, base + RP2_ASIC_IRQ); +} + +static void rp2_init_card(struct rp2_card *card) +{ + writel(4, card->bar0 + RP2_FPGA_CTL0); + writel(0, card->bar0 + RP2_FPGA_CTL1); + + rp2_reset_asic(card, 0); + if (card->n_ports >= PORTS_PER_ASIC) + rp2_reset_asic(card, 1); + + writel(RP2_IRQ_MASK_EN_m, card->bar0 + RP2_IRQ_MASK); +} + +static void rp2_init_port(struct rp2_uart_port *up, const struct firmware *fw) +{ + int i; + + writel(RP2_UART_CTL_RESET_CH_m, up->base + RP2_UART_CTL); + readl(up->base + RP2_UART_CTL); + udelay(1); + + writel(0, up->base + RP2_TXRX_CTL); + writel(0, up->base + RP2_UART_CTL); + readl(up->base + RP2_UART_CTL); + udelay(1); + + rp2_flush_fifos(up); + + for (i = 0; i < min_t(int, fw->size, RP2_UCODE_BYTES); i++) + writeb(fw->data[i], up->ucode + i); + + __rp2_uart_set_termios(up, CS8 | CREAD | CLOCAL, 0, DEFAULT_BAUD_DIV); + rp2_uart_set_mctrl(&up->port, 0); + + writeb(RP2_RX_FIFO_ena, up->ucode + RP2_RX_FIFO); + rp2_rmw(up, RP2_UART_CTL, RP2_UART_CTL_MODE_m, + RP2_UART_CTL_XMIT_EN_m | RP2_UART_CTL_MODE_rs232); + rp2_rmw_set(up, RP2_TXRX_CTL, + RP2_TXRX_CTL_TX_EN_m | RP2_TXRX_CTL_RX_EN_m); +} + +static void rp2_remove_ports(struct rp2_card *card) +{ + int i; + + for (i = 0; i < card->initialized_ports; i++) + uart_remove_one_port(&rp2_uart_driver, &card->ports[i].port); + card->initialized_ports = 0; +} + +static int rp2_load_firmware(struct rp2_card *card, const struct firmware *fw) +{ + resource_size_t phys_base; + int i, rc = 0; + + phys_base = pci_resource_start(card->pdev, 1); + + for (i = 0; i < card->n_ports; i++) { + struct rp2_uart_port *rp = &card->ports[i]; + struct uart_port *p; + int j = (unsigned)i % PORTS_PER_ASIC; + + rp->asic_base = card->bar1; + rp->base = card->bar1 + RP2_PORT_BASE + j*RP2_PORT_SPACING; + rp->ucode = card->bar1 + RP2_UCODE_BASE + j*RP2_UCODE_SPACING; + rp->card = card; + rp->idx = j; + + p = &rp->port; + p->line = card->minor_start + i; + p->dev = &card->pdev->dev; + p->type = PORT_RP2; + p->iotype = UPIO_MEM32; + p->uartclk = UART_CLOCK; + p->regshift = 2; + p->fifosize = FIFO_SIZE; + p->ops = &rp2_uart_ops; + p->irq = card->pdev->irq; + p->membase = rp->base; + p->mapbase = phys_base + RP2_PORT_BASE + j*RP2_PORT_SPACING; + + if (i >= PORTS_PER_ASIC) { + rp->asic_base += RP2_ASIC_SPACING; + rp->base += RP2_ASIC_SPACING; + rp->ucode += RP2_ASIC_SPACING; + p->mapbase += RP2_ASIC_SPACING; + } + + rp2_init_port(rp, fw); + rc = uart_add_one_port(&rp2_uart_driver, p); + if (rc) { + dev_err(&card->pdev->dev, + "error registering port %d: %d\n", i, rc); + rp2_remove_ports(card); + break; + } + card->initialized_ports++; + } + + return rc; +} + +static int rp2_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + const struct firmware *fw; + struct rp2_card *card; + struct rp2_uart_port *ports; + void __iomem * const *bars; + int rc; + + card = devm_kzalloc(&pdev->dev, sizeof(*card), GFP_KERNEL); + if (!card) + return -ENOMEM; + pci_set_drvdata(pdev, card); + spin_lock_init(&card->card_lock); + + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + rc = pcim_iomap_regions_request_all(pdev, 0x03, DRV_NAME); + if (rc) + return rc; + + bars = pcim_iomap_table(pdev); + card->bar0 = bars[0]; + card->bar1 = bars[1]; + card->pdev = pdev; + + rp2_decode_cap(id, &card->n_ports, &card->smpte); + dev_info(&pdev->dev, "found new card with %d ports\n", card->n_ports); + + card->minor_start = rp2_alloc_ports(card->n_ports); + if (card->minor_start < 0) { + dev_err(&pdev->dev, + "too many ports (try increasing CONFIG_SERIAL_RP2_NR_UARTS)\n"); + return -EINVAL; + } + + rp2_init_card(card); + + ports = devm_kcalloc(&pdev->dev, card->n_ports, sizeof(*ports), + GFP_KERNEL); + if (!ports) + return -ENOMEM; + card->ports = ports; + + rc = request_firmware(&fw, RP2_FW_NAME, &pdev->dev); + if (rc < 0) { + dev_err(&pdev->dev, "cannot find '%s' firmware image\n", + RP2_FW_NAME); + return rc; + } + + rc = rp2_load_firmware(card, fw); + + release_firmware(fw); + if (rc < 0) + return rc; + + rc = devm_request_irq(&pdev->dev, pdev->irq, rp2_uart_interrupt, + IRQF_SHARED, DRV_NAME, card); + if (rc) + return rc; + + return 0; +} + +static void rp2_remove(struct pci_dev *pdev) +{ + struct rp2_card *card = pci_get_drvdata(pdev); + + rp2_remove_ports(card); +} + +static const struct pci_device_id rp2_pci_tbl[] = { + + /* RocketPort INFINITY cards */ + + { RP_ID(0x0040), RP_CAP(8, 0) }, /* INF Octa, RJ45, selectable */ + { RP_ID(0x0041), RP_CAP(32, 0) }, /* INF 32, ext interface */ + { RP_ID(0x0042), RP_CAP(8, 0) }, /* INF Octa, ext interface */ + { RP_ID(0x0043), RP_CAP(16, 0) }, /* INF 16, ext interface */ + { RP_ID(0x0044), RP_CAP(4, 0) }, /* INF Quad, DB, selectable */ + { RP_ID(0x0045), RP_CAP(8, 0) }, /* INF Octa, DB, selectable */ + { RP_ID(0x0046), RP_CAP(4, 0) }, /* INF Quad, ext interface */ + { RP_ID(0x0047), RP_CAP(4, 0) }, /* INF Quad, RJ45 */ + { RP_ID(0x004a), RP_CAP(4, 0) }, /* INF Plus, Quad */ + { RP_ID(0x004b), RP_CAP(8, 0) }, /* INF Plus, Octa */ + { RP_ID(0x004c), RP_CAP(8, 0) }, /* INF III, Octa */ + { RP_ID(0x004d), RP_CAP(4, 0) }, /* INF III, Quad */ + { RP_ID(0x004e), RP_CAP(2, 0) }, /* INF Plus, 2, RS232 */ + { RP_ID(0x004f), RP_CAP(2, 1) }, /* INF Plus, 2, SMPTE */ + { RP_ID(0x0050), RP_CAP(4, 0) }, /* INF Plus, Quad, RJ45 */ + { RP_ID(0x0051), RP_CAP(8, 0) }, /* INF Plus, Octa, RJ45 */ + { RP_ID(0x0052), RP_CAP(8, 1) }, /* INF Octa, SMPTE */ + + /* RocketPort EXPRESS cards */ + + { RP_ID(0x0060), RP_CAP(8, 0) }, /* EXP Octa, RJ45, selectable */ + { RP_ID(0x0061), RP_CAP(32, 0) }, /* EXP 32, ext interface */ + { RP_ID(0x0062), RP_CAP(8, 0) }, /* EXP Octa, ext interface */ + { RP_ID(0x0063), RP_CAP(16, 0) }, /* EXP 16, ext interface */ + { RP_ID(0x0064), RP_CAP(4, 0) }, /* EXP Quad, DB, selectable */ + { RP_ID(0x0065), RP_CAP(8, 0) }, /* EXP Octa, DB, selectable */ + { RP_ID(0x0066), RP_CAP(4, 0) }, /* EXP Quad, ext interface */ + { RP_ID(0x0067), RP_CAP(4, 0) }, /* EXP Quad, RJ45 */ + { RP_ID(0x0068), RP_CAP(8, 0) }, /* EXP Octa, RJ11 */ + { RP_ID(0x0072), RP_CAP(8, 1) }, /* EXP Octa, SMPTE */ + { } +}; +MODULE_DEVICE_TABLE(pci, rp2_pci_tbl); + +static struct pci_driver rp2_pci_driver = { + .name = DRV_NAME, + .id_table = rp2_pci_tbl, + .probe = rp2_probe, + .remove = rp2_remove, +}; + +static int __init rp2_uart_init(void) +{ + int rc; + + rc = uart_register_driver(&rp2_uart_driver); + if (rc) + return rc; + + rc = pci_register_driver(&rp2_pci_driver); + if (rc) { + uart_unregister_driver(&rp2_uart_driver); + return rc; + } + + return 0; +} + +static void __exit rp2_uart_exit(void) +{ + pci_unregister_driver(&rp2_pci_driver); + uart_unregister_driver(&rp2_uart_driver); +} + +module_init(rp2_uart_init); +module_exit(rp2_uart_exit); + +MODULE_DESCRIPTION("Comtrol RocketPort EXPRESS/INFINITY driver"); +MODULE_AUTHOR("Kevin Cernekee "); +MODULE_LICENSE("GPL v2"); +MODULE_FIRMWARE(RP2_FW_NAME); diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c new file mode 100644 index 000000000..aa1cf2ae1 --- /dev/null +++ b/drivers/tty/serial/sa1100.c @@ -0,0 +1,950 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver for SA11x0 serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright (C) 2000 Deep Blue Solutions Ltd. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "serial_mctrl_gpio.h" + +/* We've been assigned a range on the "Low-density serial ports" major */ +#define SERIAL_SA1100_MAJOR 204 +#define MINOR_START 5 + +#define NR_PORTS 3 + +#define SA1100_ISR_PASS_LIMIT 256 + +/* + * Convert from ignore_status_mask or read_status_mask to UTSR[01] + */ +#define SM_TO_UTSR0(x) ((x) & 0xff) +#define SM_TO_UTSR1(x) ((x) >> 8) +#define UTSR0_TO_SM(x) ((x)) +#define UTSR1_TO_SM(x) ((x) << 8) + +#define UART_GET_UTCR0(sport) __raw_readl((sport)->port.membase + UTCR0) +#define UART_GET_UTCR1(sport) __raw_readl((sport)->port.membase + UTCR1) +#define UART_GET_UTCR2(sport) __raw_readl((sport)->port.membase + UTCR2) +#define UART_GET_UTCR3(sport) __raw_readl((sport)->port.membase + UTCR3) +#define UART_GET_UTSR0(sport) __raw_readl((sport)->port.membase + UTSR0) +#define UART_GET_UTSR1(sport) __raw_readl((sport)->port.membase + UTSR1) +#define UART_GET_CHAR(sport) __raw_readl((sport)->port.membase + UTDR) + +#define UART_PUT_UTCR0(sport,v) __raw_writel((v),(sport)->port.membase + UTCR0) +#define UART_PUT_UTCR1(sport,v) __raw_writel((v),(sport)->port.membase + UTCR1) +#define UART_PUT_UTCR2(sport,v) __raw_writel((v),(sport)->port.membase + UTCR2) +#define UART_PUT_UTCR3(sport,v) __raw_writel((v),(sport)->port.membase + UTCR3) +#define UART_PUT_UTSR0(sport,v) __raw_writel((v),(sport)->port.membase + UTSR0) +#define UART_PUT_UTSR1(sport,v) __raw_writel((v),(sport)->port.membase + UTSR1) +#define UART_PUT_CHAR(sport,v) __raw_writel((v),(sport)->port.membase + UTDR) + +/* + * This is the size of our serial port register set. + */ +#define UART_PORT_SIZE 0x24 + +/* + * This determines how often we check the modem status signals + * for any change. They generally aren't connected to an IRQ + * so we have to poll them. We also check immediately before + * filling the TX fifo incase CTS has been dropped. + */ +#define MCTRL_TIMEOUT (250*HZ/1000) + +struct sa1100_port { + struct uart_port port; + struct timer_list timer; + unsigned int old_status; + struct mctrl_gpios *gpios; +}; + +/* + * Handle any change of modem status signal since we were last called. + */ +static void sa1100_mctrl_check(struct sa1100_port *sport) +{ + unsigned int status, changed; + + status = sport->port.ops->get_mctrl(&sport->port); + changed = status ^ sport->old_status; + + if (changed == 0) + return; + + sport->old_status = status; + + if (changed & TIOCM_RI) + sport->port.icount.rng++; + if (changed & TIOCM_DSR) + sport->port.icount.dsr++; + if (changed & TIOCM_CAR) + uart_handle_dcd_change(&sport->port, status & TIOCM_CAR); + if (changed & TIOCM_CTS) + uart_handle_cts_change(&sport->port, status & TIOCM_CTS); + + wake_up_interruptible(&sport->port.state->port.delta_msr_wait); +} + +/* + * This is our per-port timeout handler, for checking the + * modem status signals. + */ +static void sa1100_timeout(struct timer_list *t) +{ + struct sa1100_port *sport = from_timer(sport, t, timer); + unsigned long flags; + + if (sport->port.state) { + spin_lock_irqsave(&sport->port.lock, flags); + sa1100_mctrl_check(sport); + spin_unlock_irqrestore(&sport->port.lock, flags); + + mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT); + } +} + +/* + * interrupts disabled on entry + */ +static void sa1100_stop_tx(struct uart_port *port) +{ + struct sa1100_port *sport = + container_of(port, struct sa1100_port, port); + u32 utcr3; + + utcr3 = UART_GET_UTCR3(sport); + UART_PUT_UTCR3(sport, utcr3 & ~UTCR3_TIE); + sport->port.read_status_mask &= ~UTSR0_TO_SM(UTSR0_TFS); +} + +/* + * port locked and interrupts disabled + */ +static void sa1100_start_tx(struct uart_port *port) +{ + struct sa1100_port *sport = + container_of(port, struct sa1100_port, port); + u32 utcr3; + + utcr3 = UART_GET_UTCR3(sport); + sport->port.read_status_mask |= UTSR0_TO_SM(UTSR0_TFS); + UART_PUT_UTCR3(sport, utcr3 | UTCR3_TIE); +} + +/* + * Interrupts enabled + */ +static void sa1100_stop_rx(struct uart_port *port) +{ + struct sa1100_port *sport = + container_of(port, struct sa1100_port, port); + u32 utcr3; + + utcr3 = UART_GET_UTCR3(sport); + UART_PUT_UTCR3(sport, utcr3 & ~UTCR3_RIE); +} + +/* + * Set the modem control timer to fire immediately. + */ +static void sa1100_enable_ms(struct uart_port *port) +{ + struct sa1100_port *sport = + container_of(port, struct sa1100_port, port); + + mod_timer(&sport->timer, jiffies); + + mctrl_gpio_enable_ms(sport->gpios); +} + +static void +sa1100_rx_chars(struct sa1100_port *sport) +{ + unsigned int status, ch, flg; + + status = UTSR1_TO_SM(UART_GET_UTSR1(sport)) | + UTSR0_TO_SM(UART_GET_UTSR0(sport)); + while (status & UTSR1_TO_SM(UTSR1_RNE)) { + ch = UART_GET_CHAR(sport); + + sport->port.icount.rx++; + + flg = TTY_NORMAL; + + /* + * note that the error handling code is + * out of the main execution path + */ + if (status & UTSR1_TO_SM(UTSR1_PRE | UTSR1_FRE | UTSR1_ROR)) { + if (status & UTSR1_TO_SM(UTSR1_PRE)) + sport->port.icount.parity++; + else if (status & UTSR1_TO_SM(UTSR1_FRE)) + sport->port.icount.frame++; + if (status & UTSR1_TO_SM(UTSR1_ROR)) + sport->port.icount.overrun++; + + status &= sport->port.read_status_mask; + + if (status & UTSR1_TO_SM(UTSR1_PRE)) + flg = TTY_PARITY; + else if (status & UTSR1_TO_SM(UTSR1_FRE)) + flg = TTY_FRAME; + + sport->port.sysrq = 0; + } + + if (uart_handle_sysrq_char(&sport->port, ch)) + goto ignore_char; + + uart_insert_char(&sport->port, status, UTSR1_TO_SM(UTSR1_ROR), ch, flg); + + ignore_char: + status = UTSR1_TO_SM(UART_GET_UTSR1(sport)) | + UTSR0_TO_SM(UART_GET_UTSR0(sport)); + } + + spin_unlock(&sport->port.lock); + tty_flip_buffer_push(&sport->port.state->port); + spin_lock(&sport->port.lock); +} + +static void sa1100_tx_chars(struct sa1100_port *sport) +{ + struct circ_buf *xmit = &sport->port.state->xmit; + + if (sport->port.x_char) { + UART_PUT_CHAR(sport, sport->port.x_char); + sport->port.icount.tx++; + sport->port.x_char = 0; + return; + } + + /* + * Check the modem control lines before + * transmitting anything. + */ + sa1100_mctrl_check(sport); + + if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) { + sa1100_stop_tx(&sport->port); + return; + } + + /* + * Tried using FIFO (not checking TNF) for fifo fill: + * still had the '4 bytes repeated' problem. + */ + while (UART_GET_UTSR1(sport) & UTSR1_TNF) { + UART_PUT_CHAR(sport, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + sport->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&sport->port); + + if (uart_circ_empty(xmit)) + sa1100_stop_tx(&sport->port); +} + +static irqreturn_t sa1100_int(int irq, void *dev_id) +{ + struct sa1100_port *sport = dev_id; + unsigned int status, pass_counter = 0; + + spin_lock(&sport->port.lock); + status = UART_GET_UTSR0(sport); + status &= SM_TO_UTSR0(sport->port.read_status_mask) | ~UTSR0_TFS; + do { + if (status & (UTSR0_RFS | UTSR0_RID)) { + /* Clear the receiver idle bit, if set */ + if (status & UTSR0_RID) + UART_PUT_UTSR0(sport, UTSR0_RID); + sa1100_rx_chars(sport); + } + + /* Clear the relevant break bits */ + if (status & (UTSR0_RBB | UTSR0_REB)) + UART_PUT_UTSR0(sport, status & (UTSR0_RBB | UTSR0_REB)); + + if (status & UTSR0_RBB) + sport->port.icount.brk++; + + if (status & UTSR0_REB) + uart_handle_break(&sport->port); + + if (status & UTSR0_TFS) + sa1100_tx_chars(sport); + if (pass_counter++ > SA1100_ISR_PASS_LIMIT) + break; + status = UART_GET_UTSR0(sport); + status &= SM_TO_UTSR0(sport->port.read_status_mask) | + ~UTSR0_TFS; + } while (status & (UTSR0_TFS | UTSR0_RFS | UTSR0_RID)); + spin_unlock(&sport->port.lock); + + return IRQ_HANDLED; +} + +/* + * Return TIOCSER_TEMT when transmitter is not busy. + */ +static unsigned int sa1100_tx_empty(struct uart_port *port) +{ + struct sa1100_port *sport = + container_of(port, struct sa1100_port, port); + + return UART_GET_UTSR1(sport) & UTSR1_TBY ? 0 : TIOCSER_TEMT; +} + +static unsigned int sa1100_get_mctrl(struct uart_port *port) +{ + struct sa1100_port *sport = + container_of(port, struct sa1100_port, port); + int ret = TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; + + mctrl_gpio_get(sport->gpios, &ret); + + return ret; +} + +static void sa1100_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct sa1100_port *sport = + container_of(port, struct sa1100_port, port); + + mctrl_gpio_set(sport->gpios, mctrl); +} + +/* + * Interrupts always disabled. + */ +static void sa1100_break_ctl(struct uart_port *port, int break_state) +{ + struct sa1100_port *sport = + container_of(port, struct sa1100_port, port); + unsigned long flags; + unsigned int utcr3; + + spin_lock_irqsave(&sport->port.lock, flags); + utcr3 = UART_GET_UTCR3(sport); + if (break_state == -1) + utcr3 |= UTCR3_BRK; + else + utcr3 &= ~UTCR3_BRK; + UART_PUT_UTCR3(sport, utcr3); + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +static int sa1100_startup(struct uart_port *port) +{ + struct sa1100_port *sport = + container_of(port, struct sa1100_port, port); + int retval; + + /* + * Allocate the IRQ + */ + retval = request_irq(sport->port.irq, sa1100_int, 0, + "sa11x0-uart", sport); + if (retval) + return retval; + + /* + * Finally, clear and enable interrupts + */ + UART_PUT_UTSR0(sport, -1); + UART_PUT_UTCR3(sport, UTCR3_RXE | UTCR3_TXE | UTCR3_RIE); + + /* + * Enable modem status interrupts + */ + spin_lock_irq(&sport->port.lock); + sa1100_enable_ms(&sport->port); + spin_unlock_irq(&sport->port.lock); + + return 0; +} + +static void sa1100_shutdown(struct uart_port *port) +{ + struct sa1100_port *sport = + container_of(port, struct sa1100_port, port); + + /* + * Stop our timer. + */ + del_timer_sync(&sport->timer); + + /* + * Free the interrupt + */ + free_irq(sport->port.irq, sport); + + /* + * Disable all interrupts, port and break condition. + */ + UART_PUT_UTCR3(sport, 0); +} + +static void +sa1100_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct sa1100_port *sport = + container_of(port, struct sa1100_port, port); + unsigned long flags; + unsigned int utcr0, old_utcr3, baud, quot; + unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; + + /* + * We only support CS7 and CS8. + */ + while ((termios->c_cflag & CSIZE) != CS7 && + (termios->c_cflag & CSIZE) != CS8) { + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= old_csize; + old_csize = CS8; + } + + if ((termios->c_cflag & CSIZE) == CS8) + utcr0 = UTCR0_DSS; + else + utcr0 = 0; + + if (termios->c_cflag & CSTOPB) + utcr0 |= UTCR0_SBS; + if (termios->c_cflag & PARENB) { + utcr0 |= UTCR0_PE; + if (!(termios->c_cflag & PARODD)) + utcr0 |= UTCR0_OES; + } + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + + del_timer_sync(&sport->timer); + + spin_lock_irqsave(&sport->port.lock, flags); + + sport->port.read_status_mask &= UTSR0_TO_SM(UTSR0_TFS); + sport->port.read_status_mask |= UTSR1_TO_SM(UTSR1_ROR); + if (termios->c_iflag & INPCK) + sport->port.read_status_mask |= + UTSR1_TO_SM(UTSR1_FRE | UTSR1_PRE); + if (termios->c_iflag & (BRKINT | PARMRK)) + sport->port.read_status_mask |= + UTSR0_TO_SM(UTSR0_RBB | UTSR0_REB); + + /* + * Characters to ignore + */ + sport->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + sport->port.ignore_status_mask |= + UTSR1_TO_SM(UTSR1_FRE | UTSR1_PRE); + if (termios->c_iflag & IGNBRK) { + sport->port.ignore_status_mask |= + UTSR0_TO_SM(UTSR0_RBB | UTSR0_REB); + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + sport->port.ignore_status_mask |= + UTSR1_TO_SM(UTSR1_ROR); + } + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + /* + * disable interrupts and drain transmitter + */ + old_utcr3 = UART_GET_UTCR3(sport); + UART_PUT_UTCR3(sport, old_utcr3 & ~(UTCR3_RIE | UTCR3_TIE)); + + while (UART_GET_UTSR1(sport) & UTSR1_TBY) + barrier(); + + /* then, disable everything */ + UART_PUT_UTCR3(sport, 0); + + /* set the parity, stop bits and data size */ + UART_PUT_UTCR0(sport, utcr0); + + /* set the baud rate */ + quot -= 1; + UART_PUT_UTCR1(sport, ((quot & 0xf00) >> 8)); + UART_PUT_UTCR2(sport, (quot & 0xff)); + + UART_PUT_UTSR0(sport, -1); + + UART_PUT_UTCR3(sport, old_utcr3); + + if (UART_ENABLE_MS(&sport->port, termios->c_cflag)) + sa1100_enable_ms(&sport->port); + + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +static const char *sa1100_type(struct uart_port *port) +{ + struct sa1100_port *sport = + container_of(port, struct sa1100_port, port); + + return sport->port.type == PORT_SA1100 ? "SA1100" : NULL; +} + +/* + * Release the memory region(s) being used by 'port'. + */ +static void sa1100_release_port(struct uart_port *port) +{ + struct sa1100_port *sport = + container_of(port, struct sa1100_port, port); + + release_mem_region(sport->port.mapbase, UART_PORT_SIZE); +} + +/* + * Request the memory region(s) being used by 'port'. + */ +static int sa1100_request_port(struct uart_port *port) +{ + struct sa1100_port *sport = + container_of(port, struct sa1100_port, port); + + return request_mem_region(sport->port.mapbase, UART_PORT_SIZE, + "sa11x0-uart") != NULL ? 0 : -EBUSY; +} + +/* + * Configure/autoconfigure the port. + */ +static void sa1100_config_port(struct uart_port *port, int flags) +{ + struct sa1100_port *sport = + container_of(port, struct sa1100_port, port); + + if (flags & UART_CONFIG_TYPE && + sa1100_request_port(&sport->port) == 0) + sport->port.type = PORT_SA1100; +} + +/* + * Verify the new serial_struct (for TIOCSSERIAL). + * The only change we allow are to the flags and type, and + * even then only between PORT_SA1100 and PORT_UNKNOWN + */ +static int +sa1100_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + struct sa1100_port *sport = + container_of(port, struct sa1100_port, port); + int ret = 0; + + if (ser->type != PORT_UNKNOWN && ser->type != PORT_SA1100) + ret = -EINVAL; + if (sport->port.irq != ser->irq) + ret = -EINVAL; + if (ser->io_type != SERIAL_IO_MEM) + ret = -EINVAL; + if (sport->port.uartclk / 16 != ser->baud_base) + ret = -EINVAL; + if ((void *)sport->port.mapbase != ser->iomem_base) + ret = -EINVAL; + if (sport->port.iobase != ser->port) + ret = -EINVAL; + if (ser->hub6 != 0) + ret = -EINVAL; + return ret; +} + +static struct uart_ops sa1100_pops = { + .tx_empty = sa1100_tx_empty, + .set_mctrl = sa1100_set_mctrl, + .get_mctrl = sa1100_get_mctrl, + .stop_tx = sa1100_stop_tx, + .start_tx = sa1100_start_tx, + .stop_rx = sa1100_stop_rx, + .enable_ms = sa1100_enable_ms, + .break_ctl = sa1100_break_ctl, + .startup = sa1100_startup, + .shutdown = sa1100_shutdown, + .set_termios = sa1100_set_termios, + .type = sa1100_type, + .release_port = sa1100_release_port, + .request_port = sa1100_request_port, + .config_port = sa1100_config_port, + .verify_port = sa1100_verify_port, +}; + +static struct sa1100_port sa1100_ports[NR_PORTS]; + +/* + * Setup the SA1100 serial ports. Note that we don't include the IrDA + * port here since we have our own SIR/FIR driver (see drivers/net/irda) + * + * Note also that we support "console=ttySAx" where "x" is either 0 or 1. + * Which serial port this ends up being depends on the machine you're + * running this kernel on. I'm not convinced that this is a good idea, + * but that's the way it traditionally works. + * + * Note that NanoEngine UART3 becomes UART2, and UART2 is no longer + * used here. + */ +static void __init sa1100_init_ports(void) +{ + static int first = 1; + int i; + + if (!first) + return; + first = 0; + + for (i = 0; i < NR_PORTS; i++) { + sa1100_ports[i].port.uartclk = 3686400; + sa1100_ports[i].port.ops = &sa1100_pops; + sa1100_ports[i].port.fifosize = 8; + sa1100_ports[i].port.line = i; + sa1100_ports[i].port.iotype = UPIO_MEM; + timer_setup(&sa1100_ports[i].timer, sa1100_timeout, 0); + } + + /* + * make transmit lines outputs, so that when the port + * is closed, the output is in the MARK state. + */ + PPDR |= PPC_TXD1 | PPC_TXD3; + PPSR |= PPC_TXD1 | PPC_TXD3; +} + +void sa1100_register_uart_fns(struct sa1100_port_fns *fns) +{ + if (fns->get_mctrl) + sa1100_pops.get_mctrl = fns->get_mctrl; + if (fns->set_mctrl) + sa1100_pops.set_mctrl = fns->set_mctrl; + + sa1100_pops.pm = fns->pm; + /* + * FIXME: fns->set_wake is unused - this should be called from + * the suspend() callback if device_may_wakeup(dev)) is set. + */ +} + +void __init sa1100_register_uart(int idx, int port) +{ + if (idx >= NR_PORTS) { + printk(KERN_ERR "%s: bad index number %d\n", __func__, idx); + return; + } + + switch (port) { + case 1: + sa1100_ports[idx].port.membase = (void __iomem *)&Ser1UTCR0; + sa1100_ports[idx].port.mapbase = _Ser1UTCR0; + sa1100_ports[idx].port.irq = IRQ_Ser1UART; + sa1100_ports[idx].port.flags = UPF_BOOT_AUTOCONF; + break; + + case 2: + sa1100_ports[idx].port.membase = (void __iomem *)&Ser2UTCR0; + sa1100_ports[idx].port.mapbase = _Ser2UTCR0; + sa1100_ports[idx].port.irq = IRQ_Ser2ICP; + sa1100_ports[idx].port.flags = UPF_BOOT_AUTOCONF; + break; + + case 3: + sa1100_ports[idx].port.membase = (void __iomem *)&Ser3UTCR0; + sa1100_ports[idx].port.mapbase = _Ser3UTCR0; + sa1100_ports[idx].port.irq = IRQ_Ser3UART; + sa1100_ports[idx].port.flags = UPF_BOOT_AUTOCONF; + break; + + default: + printk(KERN_ERR "%s: bad port number %d\n", __func__, port); + } +} + + +#ifdef CONFIG_SERIAL_SA1100_CONSOLE +static void sa1100_console_putchar(struct uart_port *port, int ch) +{ + struct sa1100_port *sport = + container_of(port, struct sa1100_port, port); + + while (!(UART_GET_UTSR1(sport) & UTSR1_TNF)) + barrier(); + UART_PUT_CHAR(sport, ch); +} + +/* + * Interrupts are disabled on entering + */ +static void +sa1100_console_write(struct console *co, const char *s, unsigned int count) +{ + struct sa1100_port *sport = &sa1100_ports[co->index]; + unsigned int old_utcr3, status; + + /* + * First, save UTCR3 and then disable interrupts + */ + old_utcr3 = UART_GET_UTCR3(sport); + UART_PUT_UTCR3(sport, (old_utcr3 & ~(UTCR3_RIE | UTCR3_TIE)) | + UTCR3_TXE); + + uart_console_write(&sport->port, s, count, sa1100_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore UTCR3 + */ + do { + status = UART_GET_UTSR1(sport); + } while (status & UTSR1_TBY); + UART_PUT_UTCR3(sport, old_utcr3); +} + +/* + * If the port was already initialised (eg, by a boot loader), + * try to determine the current setup. + */ +static void __init +sa1100_console_get_options(struct sa1100_port *sport, int *baud, + int *parity, int *bits) +{ + unsigned int utcr3; + + utcr3 = UART_GET_UTCR3(sport) & (UTCR3_RXE | UTCR3_TXE); + if (utcr3 == (UTCR3_RXE | UTCR3_TXE)) { + /* ok, the port was enabled */ + unsigned int utcr0, quot; + + utcr0 = UART_GET_UTCR0(sport); + + *parity = 'n'; + if (utcr0 & UTCR0_PE) { + if (utcr0 & UTCR0_OES) + *parity = 'e'; + else + *parity = 'o'; + } + + if (utcr0 & UTCR0_DSS) + *bits = 8; + else + *bits = 7; + + quot = UART_GET_UTCR2(sport) | UART_GET_UTCR1(sport) << 8; + quot &= 0xfff; + *baud = sport->port.uartclk / (16 * (quot + 1)); + } +} + +static int __init +sa1100_console_setup(struct console *co, char *options) +{ + struct sa1100_port *sport; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index == -1 || co->index >= NR_PORTS) + co->index = 0; + sport = &sa1100_ports[co->index]; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + sa1100_console_get_options(sport, &baud, &parity, &bits); + + return uart_set_options(&sport->port, co, baud, parity, bits, flow); +} + +static struct uart_driver sa1100_reg; +static struct console sa1100_console = { + .name = "ttySA", + .write = sa1100_console_write, + .device = uart_console_device, + .setup = sa1100_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &sa1100_reg, +}; + +static int __init sa1100_rs_console_init(void) +{ + sa1100_init_ports(); + register_console(&sa1100_console); + return 0; +} +console_initcall(sa1100_rs_console_init); + +#define SA1100_CONSOLE &sa1100_console +#else +#define SA1100_CONSOLE NULL +#endif + +static struct uart_driver sa1100_reg = { + .owner = THIS_MODULE, + .driver_name = "ttySA", + .dev_name = "ttySA", + .major = SERIAL_SA1100_MAJOR, + .minor = MINOR_START, + .nr = NR_PORTS, + .cons = SA1100_CONSOLE, +}; + +static int sa1100_serial_suspend(struct platform_device *dev, pm_message_t state) +{ + struct sa1100_port *sport = platform_get_drvdata(dev); + + if (sport) + uart_suspend_port(&sa1100_reg, &sport->port); + + return 0; +} + +static int sa1100_serial_resume(struct platform_device *dev) +{ + struct sa1100_port *sport = platform_get_drvdata(dev); + + if (sport) + uart_resume_port(&sa1100_reg, &sport->port); + + return 0; +} + +static int sa1100_serial_add_one_port(struct sa1100_port *sport, struct platform_device *dev) +{ + sport->port.dev = &dev->dev; + sport->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_SA1100_CONSOLE); + + // mctrl_gpio_init() requires that the GPIO driver supports interrupts, + // but we need to support GPIO drivers for hardware that has no such + // interrupts. Use mctrl_gpio_init_noauto() instead. + sport->gpios = mctrl_gpio_init_noauto(sport->port.dev, 0); + if (IS_ERR(sport->gpios)) { + int err = PTR_ERR(sport->gpios); + + dev_err(sport->port.dev, "failed to get mctrl gpios: %d\n", + err); + + if (err == -EPROBE_DEFER) + return err; + + sport->gpios = NULL; + } + + platform_set_drvdata(dev, sport); + + return uart_add_one_port(&sa1100_reg, &sport->port); +} + +static int sa1100_serial_probe(struct platform_device *dev) +{ + struct resource *res; + int i; + + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!res) + return -EINVAL; + + for (i = 0; i < NR_PORTS; i++) + if (sa1100_ports[i].port.mapbase == res->start) + break; + if (i == NR_PORTS) + return -ENODEV; + + sa1100_serial_add_one_port(&sa1100_ports[i], dev); + + return 0; +} + +static int sa1100_serial_remove(struct platform_device *pdev) +{ + struct sa1100_port *sport = platform_get_drvdata(pdev); + + if (sport) + uart_remove_one_port(&sa1100_reg, &sport->port); + + return 0; +} + +static struct platform_driver sa11x0_serial_driver = { + .probe = sa1100_serial_probe, + .remove = sa1100_serial_remove, + .suspend = sa1100_serial_suspend, + .resume = sa1100_serial_resume, + .driver = { + .name = "sa11x0-uart", + }, +}; + +static int __init sa1100_serial_init(void) +{ + int ret; + + printk(KERN_INFO "Serial: SA11x0 driver\n"); + + sa1100_init_ports(); + + ret = uart_register_driver(&sa1100_reg); + if (ret == 0) { + ret = platform_driver_register(&sa11x0_serial_driver); + if (ret) + uart_unregister_driver(&sa1100_reg); + } + return ret; +} + +static void __exit sa1100_serial_exit(void) +{ + platform_driver_unregister(&sa11x0_serial_driver); + uart_unregister_driver(&sa1100_reg); +} + +module_init(sa1100_serial_init); +module_exit(sa1100_serial_exit); + +MODULE_AUTHOR("Deep Blue Solutions Ltd"); +MODULE_DESCRIPTION("SA1100 generic serial port driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_SA1100_MAJOR); +MODULE_ALIAS("platform:sa11x0-uart"); diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c new file mode 100644 index 000000000..fa5b1321d --- /dev/null +++ b/drivers/tty/serial/samsung_tty.c @@ -0,0 +1,2746 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver core for Samsung SoC onboard UARTs. + * + * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + */ + +/* Note on 2410 error handling + * + * The s3c2410 manual has a love/hate affair with the contents of the + * UERSTAT register in the UART blocks, and keeps marking some of the + * error bits as reserved. Having checked with the s3c2410x01, + * it copes with BREAKs properly, so I am happy to ignore the RESERVED + * feature from the latter versions of the manual. + * + * If it becomes aparrent that latter versions of the 2410 remove these + * bits, then action will have to be taken to differentiate the versions + * and change the policy on BREAK + * + * BJD, 04-Nov-2004 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* UART name and device definitions */ + +#define S3C24XX_SERIAL_NAME "ttySAC" +#define S3C24XX_SERIAL_MAJOR 204 +#define S3C24XX_SERIAL_MINOR 64 + +#define S3C24XX_TX_PIO 1 +#define S3C24XX_TX_DMA 2 +#define S3C24XX_RX_PIO 1 +#define S3C24XX_RX_DMA 2 + +/* flag to ignore all characters coming in */ +#define RXSTAT_DUMMY_READ (0x10000000) + +struct s3c24xx_uart_info { + char *name; + unsigned int type; + unsigned int fifosize; + unsigned long rx_fifomask; + unsigned long rx_fifoshift; + unsigned long rx_fifofull; + unsigned long tx_fifomask; + unsigned long tx_fifoshift; + unsigned long tx_fifofull; + unsigned int def_clk_sel; + unsigned long num_clks; + unsigned long clksel_mask; + unsigned long clksel_shift; + + /* uart port features */ + + unsigned int has_divslot:1; +}; + +struct s3c24xx_serial_drv_data { + struct s3c24xx_uart_info *info; + struct s3c2410_uartcfg *def_cfg; + unsigned int fifosize[CONFIG_SERIAL_SAMSUNG_UARTS]; +}; + +struct s3c24xx_uart_dma { + unsigned int rx_chan_id; + unsigned int tx_chan_id; + + struct dma_slave_config rx_conf; + struct dma_slave_config tx_conf; + + struct dma_chan *rx_chan; + struct dma_chan *tx_chan; + + dma_addr_t rx_addr; + dma_addr_t tx_addr; + + dma_cookie_t rx_cookie; + dma_cookie_t tx_cookie; + + char *rx_buf; + + dma_addr_t tx_transfer_addr; + + size_t rx_size; + size_t tx_size; + + struct dma_async_tx_descriptor *tx_desc; + struct dma_async_tx_descriptor *rx_desc; + + int tx_bytes_requested; + int rx_bytes_requested; +}; + +struct s3c24xx_uart_port { + unsigned char rx_claimed; + unsigned char tx_claimed; + unsigned char rx_enabled; + unsigned char tx_enabled; + unsigned int pm_level; + unsigned long baudclk_rate; + unsigned int min_dma_size; + + unsigned int rx_irq; + unsigned int tx_irq; + + unsigned int tx_in_progress; + unsigned int tx_mode; + unsigned int rx_mode; + + struct s3c24xx_uart_info *info; + struct clk *clk; + struct clk *baudclk; + struct uart_port port; + struct s3c24xx_serial_drv_data *drv_data; + + /* reference to platform data */ + struct s3c2410_uartcfg *cfg; + + struct s3c24xx_uart_dma *dma; + +#ifdef CONFIG_ARM_S3C24XX_CPUFREQ + struct notifier_block freq_transition; +#endif +}; + +/* conversion functions */ + +#define s3c24xx_dev_to_port(__dev) dev_get_drvdata(__dev) + +/* register access controls */ + +#define portaddr(port, reg) ((port)->membase + (reg)) +#define portaddrl(port, reg) \ + ((unsigned long *)(unsigned long)((port)->membase + (reg))) + +static u32 rd_reg(struct uart_port *port, u32 reg) +{ + switch (port->iotype) { + case UPIO_MEM: + return readb_relaxed(portaddr(port, reg)); + case UPIO_MEM32: + return readl_relaxed(portaddr(port, reg)); + default: + return 0; + } + return 0; +} + +#define rd_regl(port, reg) (readl_relaxed(portaddr(port, reg))) + +static void wr_reg(struct uart_port *port, u32 reg, u32 val) +{ + switch (port->iotype) { + case UPIO_MEM: + writeb_relaxed(val, portaddr(port, reg)); + break; + case UPIO_MEM32: + writel_relaxed(val, portaddr(port, reg)); + break; + } +} + +#define wr_regl(port, reg, val) writel_relaxed(val, portaddr(port, reg)) + +/* Byte-order aware bit setting/clearing functions. */ + +static inline void s3c24xx_set_bit(struct uart_port *port, int idx, + unsigned int reg) +{ + unsigned long flags; + u32 val; + + local_irq_save(flags); + val = rd_regl(port, reg); + val |= (1 << idx); + wr_regl(port, reg, val); + local_irq_restore(flags); +} + +static inline void s3c24xx_clear_bit(struct uart_port *port, int idx, + unsigned int reg) +{ + unsigned long flags; + u32 val; + + local_irq_save(flags); + val = rd_regl(port, reg); + val &= ~(1 << idx); + wr_regl(port, reg, val); + local_irq_restore(flags); +} + +static inline struct s3c24xx_uart_port *to_ourport(struct uart_port *port) +{ + return container_of(port, struct s3c24xx_uart_port, port); +} + +/* translate a port to the device name */ + +static inline const char *s3c24xx_serial_portname(struct uart_port *port) +{ + return to_platform_device(port->dev)->name; +} + +static int s3c24xx_serial_txempty_nofifo(struct uart_port *port) +{ + return rd_regl(port, S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE; +} + +/* + * s3c64xx and later SoC's include the interrupt mask and status registers in + * the controller itself, unlike the s3c24xx SoC's which have these registers + * in the interrupt controller. Check if the port type is s3c64xx or higher. + */ +static int s3c24xx_serial_has_interrupt_mask(struct uart_port *port) +{ + return to_ourport(port)->info->type == PORT_S3C6400; +} + +static void s3c24xx_serial_rx_enable(struct uart_port *port) +{ + struct s3c24xx_uart_port *ourport = to_ourport(port); + unsigned long flags; + unsigned int ucon, ufcon; + int count = 10000; + + spin_lock_irqsave(&port->lock, flags); + + while (--count && !s3c24xx_serial_txempty_nofifo(port)) + udelay(100); + + ufcon = rd_regl(port, S3C2410_UFCON); + ufcon |= S3C2410_UFCON_RESETRX; + wr_regl(port, S3C2410_UFCON, ufcon); + + ucon = rd_regl(port, S3C2410_UCON); + ucon |= S3C2410_UCON_RXIRQMODE; + wr_regl(port, S3C2410_UCON, ucon); + + ourport->rx_enabled = 1; + spin_unlock_irqrestore(&port->lock, flags); +} + +static void s3c24xx_serial_rx_disable(struct uart_port *port) +{ + struct s3c24xx_uart_port *ourport = to_ourport(port); + unsigned long flags; + unsigned int ucon; + + spin_lock_irqsave(&port->lock, flags); + + ucon = rd_regl(port, S3C2410_UCON); + ucon &= ~S3C2410_UCON_RXIRQMODE; + wr_regl(port, S3C2410_UCON, ucon); + + ourport->rx_enabled = 0; + spin_unlock_irqrestore(&port->lock, flags); +} + +static void s3c24xx_serial_stop_tx(struct uart_port *port) +{ + struct s3c24xx_uart_port *ourport = to_ourport(port); + struct s3c24xx_uart_dma *dma = ourport->dma; + struct circ_buf *xmit = &port->state->xmit; + struct dma_tx_state state; + int count; + + if (!ourport->tx_enabled) + return; + + if (s3c24xx_serial_has_interrupt_mask(port)) + s3c24xx_set_bit(port, S3C64XX_UINTM_TXD, S3C64XX_UINTM); + else + disable_irq_nosync(ourport->tx_irq); + + if (dma && dma->tx_chan && ourport->tx_in_progress == S3C24XX_TX_DMA) { + dmaengine_pause(dma->tx_chan); + dmaengine_tx_status(dma->tx_chan, dma->tx_cookie, &state); + dmaengine_terminate_all(dma->tx_chan); + dma_sync_single_for_cpu(ourport->port.dev, + dma->tx_transfer_addr, dma->tx_size, DMA_TO_DEVICE); + async_tx_ack(dma->tx_desc); + count = dma->tx_bytes_requested - state.residue; + xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1); + port->icount.tx += count; + } + + ourport->tx_enabled = 0; + ourport->tx_in_progress = 0; + + if (port->flags & UPF_CONS_FLOW) + s3c24xx_serial_rx_enable(port); + + ourport->tx_mode = 0; +} + +static void s3c24xx_serial_start_next_tx(struct s3c24xx_uart_port *ourport); + +static void s3c24xx_serial_tx_dma_complete(void *args) +{ + struct s3c24xx_uart_port *ourport = args; + struct uart_port *port = &ourport->port; + struct circ_buf *xmit = &port->state->xmit; + struct s3c24xx_uart_dma *dma = ourport->dma; + struct dma_tx_state state; + unsigned long flags; + int count; + + dmaengine_tx_status(dma->tx_chan, dma->tx_cookie, &state); + count = dma->tx_bytes_requested - state.residue; + async_tx_ack(dma->tx_desc); + + dma_sync_single_for_cpu(ourport->port.dev, dma->tx_transfer_addr, + dma->tx_size, DMA_TO_DEVICE); + + spin_lock_irqsave(&port->lock, flags); + + xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1); + port->icount.tx += count; + ourport->tx_in_progress = 0; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + s3c24xx_serial_start_next_tx(ourport); + spin_unlock_irqrestore(&port->lock, flags); +} + +static void enable_tx_dma(struct s3c24xx_uart_port *ourport) +{ + struct uart_port *port = &ourport->port; + u32 ucon; + + /* Mask Tx interrupt */ + if (s3c24xx_serial_has_interrupt_mask(port)) + s3c24xx_set_bit(port, S3C64XX_UINTM_TXD, S3C64XX_UINTM); + else + disable_irq_nosync(ourport->tx_irq); + + /* Enable tx dma mode */ + ucon = rd_regl(port, S3C2410_UCON); + ucon &= ~(S3C64XX_UCON_TXBURST_MASK | S3C64XX_UCON_TXMODE_MASK); + ucon |= S3C64XX_UCON_TXBURST_1; + ucon |= S3C64XX_UCON_TXMODE_DMA; + wr_regl(port, S3C2410_UCON, ucon); + + ourport->tx_mode = S3C24XX_TX_DMA; +} + +static void enable_tx_pio(struct s3c24xx_uart_port *ourport) +{ + struct uart_port *port = &ourport->port; + u32 ucon, ufcon; + + /* Set ufcon txtrig */ + ourport->tx_in_progress = S3C24XX_TX_PIO; + ufcon = rd_regl(port, S3C2410_UFCON); + wr_regl(port, S3C2410_UFCON, ufcon); + + /* Enable tx pio mode */ + ucon = rd_regl(port, S3C2410_UCON); + ucon &= ~(S3C64XX_UCON_TXMODE_MASK); + ucon |= S3C64XX_UCON_TXMODE_CPU; + wr_regl(port, S3C2410_UCON, ucon); + + /* Unmask Tx interrupt */ + if (s3c24xx_serial_has_interrupt_mask(port)) + s3c24xx_clear_bit(port, S3C64XX_UINTM_TXD, + S3C64XX_UINTM); + else + enable_irq(ourport->tx_irq); + + ourport->tx_mode = S3C24XX_TX_PIO; +} + +static void s3c24xx_serial_start_tx_pio(struct s3c24xx_uart_port *ourport) +{ + if (ourport->tx_mode != S3C24XX_TX_PIO) + enable_tx_pio(ourport); +} + +static int s3c24xx_serial_start_tx_dma(struct s3c24xx_uart_port *ourport, + unsigned int count) +{ + struct uart_port *port = &ourport->port; + struct circ_buf *xmit = &port->state->xmit; + struct s3c24xx_uart_dma *dma = ourport->dma; + + if (ourport->tx_mode != S3C24XX_TX_DMA) + enable_tx_dma(ourport); + + dma->tx_size = count & ~(dma_get_cache_alignment() - 1); + dma->tx_transfer_addr = dma->tx_addr + xmit->tail; + + dma_sync_single_for_device(ourport->port.dev, dma->tx_transfer_addr, + dma->tx_size, DMA_TO_DEVICE); + + dma->tx_desc = dmaengine_prep_slave_single(dma->tx_chan, + dma->tx_transfer_addr, dma->tx_size, + DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT); + if (!dma->tx_desc) { + dev_err(ourport->port.dev, "Unable to get desc for Tx\n"); + return -EIO; + } + + dma->tx_desc->callback = s3c24xx_serial_tx_dma_complete; + dma->tx_desc->callback_param = ourport; + dma->tx_bytes_requested = dma->tx_size; + + ourport->tx_in_progress = S3C24XX_TX_DMA; + dma->tx_cookie = dmaengine_submit(dma->tx_desc); + dma_async_issue_pending(dma->tx_chan); + return 0; +} + +static void s3c24xx_serial_start_next_tx(struct s3c24xx_uart_port *ourport) +{ + struct uart_port *port = &ourport->port; + struct circ_buf *xmit = &port->state->xmit; + unsigned long count; + + /* Get data size up to the end of buffer */ + count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); + + if (!count) { + s3c24xx_serial_stop_tx(port); + return; + } + + if (!ourport->dma || !ourport->dma->tx_chan || + count < ourport->min_dma_size || + xmit->tail & (dma_get_cache_alignment() - 1)) + s3c24xx_serial_start_tx_pio(ourport); + else + s3c24xx_serial_start_tx_dma(ourport, count); +} + +static void s3c24xx_serial_start_tx(struct uart_port *port) +{ + struct s3c24xx_uart_port *ourport = to_ourport(port); + struct circ_buf *xmit = &port->state->xmit; + + if (!ourport->tx_enabled) { + if (port->flags & UPF_CONS_FLOW) + s3c24xx_serial_rx_disable(port); + + ourport->tx_enabled = 1; + if (!ourport->dma || !ourport->dma->tx_chan) + s3c24xx_serial_start_tx_pio(ourport); + } + + if (ourport->dma && ourport->dma->tx_chan) { + if (!uart_circ_empty(xmit) && !ourport->tx_in_progress) + s3c24xx_serial_start_next_tx(ourport); + } +} + +static void s3c24xx_uart_copy_rx_to_tty(struct s3c24xx_uart_port *ourport, + struct tty_port *tty, int count) +{ + struct s3c24xx_uart_dma *dma = ourport->dma; + int copied; + + if (!count) + return; + + dma_sync_single_for_cpu(ourport->port.dev, dma->rx_addr, + dma->rx_size, DMA_FROM_DEVICE); + + ourport->port.icount.rx += count; + if (!tty) { + dev_err(ourport->port.dev, "No tty port\n"); + return; + } + copied = tty_insert_flip_string(tty, + ((unsigned char *)(ourport->dma->rx_buf)), count); + if (copied != count) { + WARN_ON(1); + dev_err(ourport->port.dev, "RxData copy to tty layer failed\n"); + } +} + +static void s3c24xx_serial_stop_rx(struct uart_port *port) +{ + struct s3c24xx_uart_port *ourport = to_ourport(port); + struct s3c24xx_uart_dma *dma = ourport->dma; + struct tty_port *t = &port->state->port; + struct dma_tx_state state; + enum dma_status dma_status; + unsigned int received; + + if (ourport->rx_enabled) { + dev_dbg(port->dev, "stopping rx\n"); + if (s3c24xx_serial_has_interrupt_mask(port)) + s3c24xx_set_bit(port, S3C64XX_UINTM_RXD, + S3C64XX_UINTM); + else + disable_irq_nosync(ourport->rx_irq); + ourport->rx_enabled = 0; + } + if (dma && dma->rx_chan) { + dmaengine_pause(dma->tx_chan); + dma_status = dmaengine_tx_status(dma->rx_chan, + dma->rx_cookie, &state); + if (dma_status == DMA_IN_PROGRESS || + dma_status == DMA_PAUSED) { + received = dma->rx_bytes_requested - state.residue; + dmaengine_terminate_all(dma->rx_chan); + s3c24xx_uart_copy_rx_to_tty(ourport, t, received); + } + } +} + +static inline struct s3c24xx_uart_info + *s3c24xx_port_to_info(struct uart_port *port) +{ + return to_ourport(port)->info; +} + +static inline struct s3c2410_uartcfg + *s3c24xx_port_to_cfg(struct uart_port *port) +{ + struct s3c24xx_uart_port *ourport; + + if (port->dev == NULL) + return NULL; + + ourport = container_of(port, struct s3c24xx_uart_port, port); + return ourport->cfg; +} + +static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport, + unsigned long ufstat) +{ + struct s3c24xx_uart_info *info = ourport->info; + + if (ufstat & info->rx_fifofull) + return ourport->port.fifosize; + + return (ufstat & info->rx_fifomask) >> info->rx_fifoshift; +} + +static void s3c64xx_start_rx_dma(struct s3c24xx_uart_port *ourport); +static void s3c24xx_serial_rx_dma_complete(void *args) +{ + struct s3c24xx_uart_port *ourport = args; + struct uart_port *port = &ourport->port; + + struct s3c24xx_uart_dma *dma = ourport->dma; + struct tty_port *t = &port->state->port; + struct tty_struct *tty = tty_port_tty_get(&ourport->port.state->port); + + struct dma_tx_state state; + unsigned long flags; + int received; + + dmaengine_tx_status(dma->rx_chan, dma->rx_cookie, &state); + received = dma->rx_bytes_requested - state.residue; + async_tx_ack(dma->rx_desc); + + spin_lock_irqsave(&port->lock, flags); + + if (received) + s3c24xx_uart_copy_rx_to_tty(ourport, t, received); + + if (tty) { + tty_flip_buffer_push(t); + tty_kref_put(tty); + } + + s3c64xx_start_rx_dma(ourport); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void s3c64xx_start_rx_dma(struct s3c24xx_uart_port *ourport) +{ + struct s3c24xx_uart_dma *dma = ourport->dma; + + dma_sync_single_for_device(ourport->port.dev, dma->rx_addr, + dma->rx_size, DMA_FROM_DEVICE); + + dma->rx_desc = dmaengine_prep_slave_single(dma->rx_chan, + dma->rx_addr, dma->rx_size, DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT); + if (!dma->rx_desc) { + dev_err(ourport->port.dev, "Unable to get desc for Rx\n"); + return; + } + + dma->rx_desc->callback = s3c24xx_serial_rx_dma_complete; + dma->rx_desc->callback_param = ourport; + dma->rx_bytes_requested = dma->rx_size; + + dma->rx_cookie = dmaengine_submit(dma->rx_desc); + dma_async_issue_pending(dma->rx_chan); +} + +/* ? - where has parity gone?? */ +#define S3C2410_UERSTAT_PARITY (0x1000) + +static void enable_rx_dma(struct s3c24xx_uart_port *ourport) +{ + struct uart_port *port = &ourport->port; + unsigned int ucon; + + /* set Rx mode to DMA mode */ + ucon = rd_regl(port, S3C2410_UCON); + ucon &= ~(S3C64XX_UCON_RXBURST_MASK | + S3C64XX_UCON_TIMEOUT_MASK | + S3C64XX_UCON_EMPTYINT_EN | + S3C64XX_UCON_DMASUS_EN | + S3C64XX_UCON_TIMEOUT_EN | + S3C64XX_UCON_RXMODE_MASK); + ucon |= S3C64XX_UCON_RXBURST_1 | + 0xf << S3C64XX_UCON_TIMEOUT_SHIFT | + S3C64XX_UCON_EMPTYINT_EN | + S3C64XX_UCON_TIMEOUT_EN | + S3C64XX_UCON_RXMODE_DMA; + wr_regl(port, S3C2410_UCON, ucon); + + ourport->rx_mode = S3C24XX_RX_DMA; +} + +static void enable_rx_pio(struct s3c24xx_uart_port *ourport) +{ + struct uart_port *port = &ourport->port; + unsigned int ucon; + + /* set Rx mode to DMA mode */ + ucon = rd_regl(port, S3C2410_UCON); + ucon &= ~(S3C64XX_UCON_TIMEOUT_MASK | + S3C64XX_UCON_EMPTYINT_EN | + S3C64XX_UCON_DMASUS_EN | + S3C64XX_UCON_TIMEOUT_EN | + S3C64XX_UCON_RXMODE_MASK); + ucon |= 0xf << S3C64XX_UCON_TIMEOUT_SHIFT | + S3C64XX_UCON_TIMEOUT_EN | + S3C64XX_UCON_RXMODE_CPU; + wr_regl(port, S3C2410_UCON, ucon); + + ourport->rx_mode = S3C24XX_RX_PIO; +} + +static void s3c24xx_serial_rx_drain_fifo(struct s3c24xx_uart_port *ourport); + +static irqreturn_t s3c24xx_serial_rx_chars_dma(void *dev_id) +{ + unsigned int utrstat, received; + struct s3c24xx_uart_port *ourport = dev_id; + struct uart_port *port = &ourport->port; + struct s3c24xx_uart_dma *dma = ourport->dma; + struct tty_struct *tty = tty_port_tty_get(&ourport->port.state->port); + struct tty_port *t = &port->state->port; + unsigned long flags; + struct dma_tx_state state; + + utrstat = rd_regl(port, S3C2410_UTRSTAT); + rd_regl(port, S3C2410_UFSTAT); + + spin_lock_irqsave(&port->lock, flags); + + if (!(utrstat & S3C2410_UTRSTAT_TIMEOUT)) { + s3c64xx_start_rx_dma(ourport); + if (ourport->rx_mode == S3C24XX_RX_PIO) + enable_rx_dma(ourport); + goto finish; + } + + if (ourport->rx_mode == S3C24XX_RX_DMA) { + dmaengine_pause(dma->rx_chan); + dmaengine_tx_status(dma->rx_chan, dma->rx_cookie, &state); + dmaengine_terminate_all(dma->rx_chan); + received = dma->rx_bytes_requested - state.residue; + s3c24xx_uart_copy_rx_to_tty(ourport, t, received); + + enable_rx_pio(ourport); + } + + s3c24xx_serial_rx_drain_fifo(ourport); + + if (tty) { + tty_flip_buffer_push(t); + tty_kref_put(tty); + } + + wr_regl(port, S3C2410_UTRSTAT, S3C2410_UTRSTAT_TIMEOUT); + +finish: + spin_unlock_irqrestore(&port->lock, flags); + + return IRQ_HANDLED; +} + +static void s3c24xx_serial_rx_drain_fifo(struct s3c24xx_uart_port *ourport) +{ + struct uart_port *port = &ourport->port; + unsigned int ufcon, ch, flag, ufstat, uerstat; + unsigned int fifocnt = 0; + int max_count = port->fifosize; + + while (max_count-- > 0) { + /* + * Receive all characters known to be in FIFO + * before reading FIFO level again + */ + if (fifocnt == 0) { + ufstat = rd_regl(port, S3C2410_UFSTAT); + fifocnt = s3c24xx_serial_rx_fifocnt(ourport, ufstat); + if (fifocnt == 0) + break; + } + fifocnt--; + + uerstat = rd_regl(port, S3C2410_UERSTAT); + ch = rd_reg(port, S3C2410_URXH); + + if (port->flags & UPF_CONS_FLOW) { + int txe = s3c24xx_serial_txempty_nofifo(port); + + if (ourport->rx_enabled) { + if (!txe) { + ourport->rx_enabled = 0; + continue; + } + } else { + if (txe) { + ufcon = rd_regl(port, S3C2410_UFCON); + ufcon |= S3C2410_UFCON_RESETRX; + wr_regl(port, S3C2410_UFCON, ufcon); + ourport->rx_enabled = 1; + return; + } + continue; + } + } + + /* insert the character into the buffer */ + + flag = TTY_NORMAL; + port->icount.rx++; + + if (unlikely(uerstat & S3C2410_UERSTAT_ANY)) { + dev_dbg(port->dev, + "rxerr: port ch=0x%02x, rxs=0x%08x\n", + ch, uerstat); + + /* check for break */ + if (uerstat & S3C2410_UERSTAT_BREAK) { + dev_dbg(port->dev, "break!\n"); + port->icount.brk++; + if (uart_handle_break(port)) + continue; /* Ignore character */ + } + + if (uerstat & S3C2410_UERSTAT_FRAME) + port->icount.frame++; + if (uerstat & S3C2410_UERSTAT_OVERRUN) + port->icount.overrun++; + + uerstat &= port->read_status_mask; + + if (uerstat & S3C2410_UERSTAT_BREAK) + flag = TTY_BREAK; + else if (uerstat & S3C2410_UERSTAT_PARITY) + flag = TTY_PARITY; + else if (uerstat & (S3C2410_UERSTAT_FRAME | + S3C2410_UERSTAT_OVERRUN)) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(port, ch)) + continue; /* Ignore character */ + + uart_insert_char(port, uerstat, S3C2410_UERSTAT_OVERRUN, + ch, flag); + } + + tty_flip_buffer_push(&port->state->port); +} + +static irqreturn_t s3c24xx_serial_rx_chars_pio(void *dev_id) +{ + struct s3c24xx_uart_port *ourport = dev_id; + struct uart_port *port = &ourport->port; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + s3c24xx_serial_rx_drain_fifo(ourport); + spin_unlock_irqrestore(&port->lock, flags); + + return IRQ_HANDLED; +} + +static irqreturn_t s3c24xx_serial_rx_chars(int irq, void *dev_id) +{ + struct s3c24xx_uart_port *ourport = dev_id; + + if (ourport->dma && ourport->dma->rx_chan) + return s3c24xx_serial_rx_chars_dma(dev_id); + return s3c24xx_serial_rx_chars_pio(dev_id); +} + +static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id) +{ + struct s3c24xx_uart_port *ourport = id; + struct uart_port *port = &ourport->port; + struct circ_buf *xmit = &port->state->xmit; + unsigned long flags; + int count, dma_count = 0; + + spin_lock_irqsave(&port->lock, flags); + + count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); + + if (ourport->dma && ourport->dma->tx_chan && + count >= ourport->min_dma_size) { + int align = dma_get_cache_alignment() - + (xmit->tail & (dma_get_cache_alignment() - 1)); + if (count - align >= ourport->min_dma_size) { + dma_count = count - align; + count = align; + } + } + + if (port->x_char) { + wr_reg(port, S3C2410_UTXH, port->x_char); + port->icount.tx++; + port->x_char = 0; + goto out; + } + + /* if there isn't anything more to transmit, or the uart is now + * stopped, disable the uart and exit + */ + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + s3c24xx_serial_stop_tx(port); + goto out; + } + + /* try and drain the buffer... */ + + if (count > port->fifosize) { + count = port->fifosize; + dma_count = 0; + } + + while (!uart_circ_empty(xmit) && count > 0) { + if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull) + break; + + wr_reg(port, S3C2410_UTXH, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + count--; + } + + if (!count && dma_count) { + s3c24xx_serial_start_tx_dma(ourport, dma_count); + goto out; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + s3c24xx_serial_stop_tx(port); + +out: + spin_unlock_irqrestore(&port->lock, flags); + return IRQ_HANDLED; +} + +/* interrupt handler for s3c64xx and later SoC's.*/ +static irqreturn_t s3c64xx_serial_handle_irq(int irq, void *id) +{ + struct s3c24xx_uart_port *ourport = id; + struct uart_port *port = &ourport->port; + unsigned int pend = rd_regl(port, S3C64XX_UINTP); + irqreturn_t ret = IRQ_HANDLED; + + if (pend & S3C64XX_UINTM_RXD_MSK) { + ret = s3c24xx_serial_rx_chars(irq, id); + wr_regl(port, S3C64XX_UINTP, S3C64XX_UINTM_RXD_MSK); + } + if (pend & S3C64XX_UINTM_TXD_MSK) { + ret = s3c24xx_serial_tx_chars(irq, id); + wr_regl(port, S3C64XX_UINTP, S3C64XX_UINTM_TXD_MSK); + } + return ret; +} + +static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port) +{ + struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + unsigned long ufstat = rd_regl(port, S3C2410_UFSTAT); + unsigned long ufcon = rd_regl(port, S3C2410_UFCON); + + if (ufcon & S3C2410_UFCON_FIFOMODE) { + if ((ufstat & info->tx_fifomask) != 0 || + (ufstat & info->tx_fifofull)) + return 0; + + return 1; + } + + return s3c24xx_serial_txempty_nofifo(port); +} + +/* no modem control lines */ +static unsigned int s3c24xx_serial_get_mctrl(struct uart_port *port) +{ + unsigned int umstat = rd_reg(port, S3C2410_UMSTAT); + + if (umstat & S3C2410_UMSTAT_CTS) + return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; + else + return TIOCM_CAR | TIOCM_DSR; +} + +static void s3c24xx_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + unsigned int umcon = rd_regl(port, S3C2410_UMCON); + + if (mctrl & TIOCM_RTS) + umcon |= S3C2410_UMCOM_RTS_LOW; + else + umcon &= ~S3C2410_UMCOM_RTS_LOW; + + wr_regl(port, S3C2410_UMCON, umcon); +} + +static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state) +{ + unsigned long flags; + unsigned int ucon; + + spin_lock_irqsave(&port->lock, flags); + + ucon = rd_regl(port, S3C2410_UCON); + + if (break_state) + ucon |= S3C2410_UCON_SBREAK; + else + ucon &= ~S3C2410_UCON_SBREAK; + + wr_regl(port, S3C2410_UCON, ucon); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p) +{ + struct s3c24xx_uart_dma *dma = p->dma; + struct dma_slave_caps dma_caps; + const char *reason = NULL; + int ret; + + /* Default slave configuration parameters */ + dma->rx_conf.direction = DMA_DEV_TO_MEM; + dma->rx_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + dma->rx_conf.src_addr = p->port.mapbase + S3C2410_URXH; + dma->rx_conf.src_maxburst = 1; + + dma->tx_conf.direction = DMA_MEM_TO_DEV; + dma->tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + dma->tx_conf.dst_addr = p->port.mapbase + S3C2410_UTXH; + dma->tx_conf.dst_maxburst = 1; + + dma->rx_chan = dma_request_chan(p->port.dev, "rx"); + + if (IS_ERR(dma->rx_chan)) { + reason = "DMA RX channel request failed"; + ret = PTR_ERR(dma->rx_chan); + goto err_warn; + } + + ret = dma_get_slave_caps(dma->rx_chan, &dma_caps); + if (ret < 0 || + dma_caps.residue_granularity < DMA_RESIDUE_GRANULARITY_BURST) { + reason = "insufficient DMA RX engine capabilities"; + ret = -EOPNOTSUPP; + goto err_release_rx; + } + + dmaengine_slave_config(dma->rx_chan, &dma->rx_conf); + + dma->tx_chan = dma_request_chan(p->port.dev, "tx"); + if (IS_ERR(dma->tx_chan)) { + reason = "DMA TX channel request failed"; + ret = PTR_ERR(dma->tx_chan); + goto err_release_rx; + } + + ret = dma_get_slave_caps(dma->tx_chan, &dma_caps); + if (ret < 0 || + dma_caps.residue_granularity < DMA_RESIDUE_GRANULARITY_BURST) { + reason = "insufficient DMA TX engine capabilities"; + ret = -EOPNOTSUPP; + goto err_release_tx; + } + + dmaengine_slave_config(dma->tx_chan, &dma->tx_conf); + + /* RX buffer */ + dma->rx_size = PAGE_SIZE; + + dma->rx_buf = kmalloc(dma->rx_size, GFP_KERNEL); + if (!dma->rx_buf) { + ret = -ENOMEM; + goto err_release_tx; + } + + dma->rx_addr = dma_map_single(p->port.dev, dma->rx_buf, + dma->rx_size, DMA_FROM_DEVICE); + if (dma_mapping_error(p->port.dev, dma->rx_addr)) { + reason = "DMA mapping error for RX buffer"; + ret = -EIO; + goto err_free_rx; + } + + /* TX buffer */ + dma->tx_addr = dma_map_single(p->port.dev, p->port.state->xmit.buf, + UART_XMIT_SIZE, DMA_TO_DEVICE); + if (dma_mapping_error(p->port.dev, dma->tx_addr)) { + reason = "DMA mapping error for TX buffer"; + ret = -EIO; + goto err_unmap_rx; + } + + return 0; + +err_unmap_rx: + dma_unmap_single(p->port.dev, dma->rx_addr, dma->rx_size, + DMA_FROM_DEVICE); +err_free_rx: + kfree(dma->rx_buf); +err_release_tx: + dma_release_channel(dma->tx_chan); +err_release_rx: + dma_release_channel(dma->rx_chan); +err_warn: + if (reason) + dev_warn(p->port.dev, "%s, DMA will not be used\n", reason); + return ret; +} + +static void s3c24xx_serial_release_dma(struct s3c24xx_uart_port *p) +{ + struct s3c24xx_uart_dma *dma = p->dma; + + if (dma->rx_chan) { + dmaengine_terminate_all(dma->rx_chan); + dma_unmap_single(p->port.dev, dma->rx_addr, + dma->rx_size, DMA_FROM_DEVICE); + kfree(dma->rx_buf); + dma_release_channel(dma->rx_chan); + dma->rx_chan = NULL; + } + + if (dma->tx_chan) { + dmaengine_terminate_all(dma->tx_chan); + dma_unmap_single(p->port.dev, dma->tx_addr, + UART_XMIT_SIZE, DMA_TO_DEVICE); + dma_release_channel(dma->tx_chan); + dma->tx_chan = NULL; + } +} + +static void s3c24xx_serial_shutdown(struct uart_port *port) +{ + struct s3c24xx_uart_port *ourport = to_ourport(port); + + if (ourport->tx_claimed) { + if (!s3c24xx_serial_has_interrupt_mask(port)) + free_irq(ourport->tx_irq, ourport); + ourport->tx_enabled = 0; + ourport->tx_claimed = 0; + ourport->tx_mode = 0; + } + + if (ourport->rx_claimed) { + if (!s3c24xx_serial_has_interrupt_mask(port)) + free_irq(ourport->rx_irq, ourport); + ourport->rx_claimed = 0; + ourport->rx_enabled = 0; + } + + /* Clear pending interrupts and mask all interrupts */ + if (s3c24xx_serial_has_interrupt_mask(port)) { + free_irq(port->irq, ourport); + + wr_regl(port, S3C64XX_UINTP, 0xf); + wr_regl(port, S3C64XX_UINTM, 0xf); + } + + if (ourport->dma) + s3c24xx_serial_release_dma(ourport); + + ourport->tx_in_progress = 0; +} + +static int s3c24xx_serial_startup(struct uart_port *port) +{ + struct s3c24xx_uart_port *ourport = to_ourport(port); + int ret; + + ourport->rx_enabled = 1; + + ret = request_irq(ourport->rx_irq, s3c24xx_serial_rx_chars, 0, + s3c24xx_serial_portname(port), ourport); + + if (ret != 0) { + dev_err(port->dev, "cannot get irq %d\n", ourport->rx_irq); + return ret; + } + + ourport->rx_claimed = 1; + + dev_dbg(port->dev, "requesting tx irq...\n"); + + ourport->tx_enabled = 1; + + ret = request_irq(ourport->tx_irq, s3c24xx_serial_tx_chars, 0, + s3c24xx_serial_portname(port), ourport); + + if (ret) { + dev_err(port->dev, "cannot get irq %d\n", ourport->tx_irq); + goto err; + } + + ourport->tx_claimed = 1; + + /* the port reset code should have done the correct + * register setup for the port controls + */ + + return ret; + +err: + s3c24xx_serial_shutdown(port); + return ret; +} + +static int s3c64xx_serial_startup(struct uart_port *port) +{ + struct s3c24xx_uart_port *ourport = to_ourport(port); + unsigned long flags; + unsigned int ufcon; + int ret; + + wr_regl(port, S3C64XX_UINTM, 0xf); + if (ourport->dma) { + ret = s3c24xx_serial_request_dma(ourport); + if (ret < 0) { + devm_kfree(port->dev, ourport->dma); + ourport->dma = NULL; + } + } + + ret = request_irq(port->irq, s3c64xx_serial_handle_irq, IRQF_SHARED, + s3c24xx_serial_portname(port), ourport); + if (ret) { + dev_err(port->dev, "cannot get irq %d\n", port->irq); + return ret; + } + + /* For compatibility with s3c24xx Soc's */ + ourport->rx_enabled = 1; + ourport->rx_claimed = 1; + ourport->tx_enabled = 0; + ourport->tx_claimed = 1; + + spin_lock_irqsave(&port->lock, flags); + + ufcon = rd_regl(port, S3C2410_UFCON); + ufcon |= S3C2410_UFCON_RESETRX | S5PV210_UFCON_RXTRIG8; + if (!uart_console(port)) + ufcon |= S3C2410_UFCON_RESETTX; + wr_regl(port, S3C2410_UFCON, ufcon); + + enable_rx_pio(ourport); + + spin_unlock_irqrestore(&port->lock, flags); + + /* Enable Rx Interrupt */ + s3c24xx_clear_bit(port, S3C64XX_UINTM_RXD, S3C64XX_UINTM); + + return ret; +} + +/* power power management control */ + +static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level, + unsigned int old) +{ + struct s3c24xx_uart_port *ourport = to_ourport(port); + int timeout = 10000; + + ourport->pm_level = level; + + switch (level) { + case 3: + while (--timeout && !s3c24xx_serial_txempty_nofifo(port)) + udelay(100); + + if (!IS_ERR(ourport->baudclk)) + clk_disable_unprepare(ourport->baudclk); + + clk_disable_unprepare(ourport->clk); + break; + + case 0: + clk_prepare_enable(ourport->clk); + + if (!IS_ERR(ourport->baudclk)) + clk_prepare_enable(ourport->baudclk); + + break; + default: + dev_err(port->dev, "s3c24xx_serial: unknown pm %d\n", level); + } +} + +/* baud rate calculation + * + * The UARTs on the S3C2410/S3C2440 can take their clocks from a number + * of different sources, including the peripheral clock ("pclk") and an + * external clock ("uclk"). The S3C2440 also adds the core clock ("fclk") + * with a programmable extra divisor. + * + * The following code goes through the clock sources, and calculates the + * baud clocks (and the resultant actual baud rates) and then tries to + * pick the closest one and select that. + * + */ + +#define MAX_CLK_NAME_LENGTH 15 + +static inline int s3c24xx_serial_getsource(struct uart_port *port) +{ + struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + unsigned int ucon; + + if (info->num_clks == 1) + return 0; + + ucon = rd_regl(port, S3C2410_UCON); + ucon &= info->clksel_mask; + return ucon >> info->clksel_shift; +} + +static void s3c24xx_serial_setsource(struct uart_port *port, + unsigned int clk_sel) +{ + struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + unsigned int ucon; + + if (info->num_clks == 1) + return; + + ucon = rd_regl(port, S3C2410_UCON); + if ((ucon & info->clksel_mask) >> info->clksel_shift == clk_sel) + return; + + ucon &= ~info->clksel_mask; + ucon |= clk_sel << info->clksel_shift; + wr_regl(port, S3C2410_UCON, ucon); +} + +static unsigned int s3c24xx_serial_getclk(struct s3c24xx_uart_port *ourport, + unsigned int req_baud, struct clk **best_clk, + unsigned int *clk_num) +{ + struct s3c24xx_uart_info *info = ourport->info; + struct clk *clk; + unsigned long rate; + unsigned int cnt, baud, quot, best_quot = 0; + char clkname[MAX_CLK_NAME_LENGTH]; + int calc_deviation, deviation = (1 << 30) - 1; + + for (cnt = 0; cnt < info->num_clks; cnt++) { + /* Keep selected clock if provided */ + if (ourport->cfg->clk_sel && + !(ourport->cfg->clk_sel & (1 << cnt))) + continue; + + sprintf(clkname, "clk_uart_baud%d", cnt); + clk = clk_get(ourport->port.dev, clkname); + if (IS_ERR(clk)) + continue; + + rate = clk_get_rate(clk); + if (!rate) { + dev_err(ourport->port.dev, + "Failed to get clock rate for %s.\n", clkname); + clk_put(clk); + continue; + } + + if (ourport->info->has_divslot) { + unsigned long div = rate / req_baud; + + /* The UDIVSLOT register on the newer UARTs allows us to + * get a divisor adjustment of 1/16th on the baud clock. + * + * We don't keep the UDIVSLOT value (the 16ths we + * calculated by not multiplying the baud by 16) as it + * is easy enough to recalculate. + */ + + quot = div / 16; + baud = rate / div; + } else { + quot = (rate + (8 * req_baud)) / (16 * req_baud); + baud = rate / (quot * 16); + } + quot--; + + calc_deviation = req_baud - baud; + if (calc_deviation < 0) + calc_deviation = -calc_deviation; + + if (calc_deviation < deviation) { + /* + * If we find a better clk, release the previous one, if + * any. + */ + if (!IS_ERR(*best_clk)) + clk_put(*best_clk); + *best_clk = clk; + best_quot = quot; + *clk_num = cnt; + deviation = calc_deviation; + } else { + clk_put(clk); + } + } + + return best_quot; +} + +/* udivslot_table[] + * + * This table takes the fractional value of the baud divisor and gives + * the recommended setting for the UDIVSLOT register. + */ +static u16 udivslot_table[16] = { + [0] = 0x0000, + [1] = 0x0080, + [2] = 0x0808, + [3] = 0x0888, + [4] = 0x2222, + [5] = 0x4924, + [6] = 0x4A52, + [7] = 0x54AA, + [8] = 0x5555, + [9] = 0xD555, + [10] = 0xD5D5, + [11] = 0xDDD5, + [12] = 0xDDDD, + [13] = 0xDFDD, + [14] = 0xDFDF, + [15] = 0xFFDF, +}; + +static void s3c24xx_serial_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port); + struct s3c24xx_uart_port *ourport = to_ourport(port); + struct clk *clk = ERR_PTR(-EINVAL); + unsigned long flags; + unsigned int baud, quot, clk_sel = 0; + unsigned int ulcon; + unsigned int umcon; + unsigned int udivslot = 0; + + /* + * We don't support modem control lines. + */ + termios->c_cflag &= ~(HUPCL | CMSPAR); + termios->c_cflag |= CLOCAL; + + /* + * Ask the core to calculate the divisor for us. + */ + + baud = uart_get_baud_rate(port, termios, old, 0, 3000000); + quot = s3c24xx_serial_getclk(ourport, baud, &clk, &clk_sel); + if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST) + quot = port->custom_divisor; + if (IS_ERR(clk)) + return; + + /* check to see if we need to change clock source */ + + if (ourport->baudclk != clk) { + clk_prepare_enable(clk); + + s3c24xx_serial_setsource(port, clk_sel); + + if (!IS_ERR(ourport->baudclk)) { + clk_disable_unprepare(ourport->baudclk); + ourport->baudclk = ERR_PTR(-EINVAL); + } + + ourport->baudclk = clk; + ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0; + } + + if (ourport->info->has_divslot) { + unsigned int div = ourport->baudclk_rate / baud; + + if (cfg->has_fracval) { + udivslot = (div & 15); + dev_dbg(port->dev, "fracval = %04x\n", udivslot); + } else { + udivslot = udivslot_table[div & 15]; + dev_dbg(port->dev, "udivslot = %04x (div %d)\n", + udivslot, div & 15); + } + } + + switch (termios->c_cflag & CSIZE) { + case CS5: + dev_dbg(port->dev, "config: 5bits/char\n"); + ulcon = S3C2410_LCON_CS5; + break; + case CS6: + dev_dbg(port->dev, "config: 6bits/char\n"); + ulcon = S3C2410_LCON_CS6; + break; + case CS7: + dev_dbg(port->dev, "config: 7bits/char\n"); + ulcon = S3C2410_LCON_CS7; + break; + case CS8: + default: + dev_dbg(port->dev, "config: 8bits/char\n"); + ulcon = S3C2410_LCON_CS8; + break; + } + + /* preserve original lcon IR settings */ + ulcon |= (cfg->ulcon & S3C2410_LCON_IRM); + + if (termios->c_cflag & CSTOPB) + ulcon |= S3C2410_LCON_STOPB; + + if (termios->c_cflag & PARENB) { + if (termios->c_cflag & PARODD) + ulcon |= S3C2410_LCON_PODD; + else + ulcon |= S3C2410_LCON_PEVEN; + } else { + ulcon |= S3C2410_LCON_PNONE; + } + + spin_lock_irqsave(&port->lock, flags); + + dev_dbg(port->dev, + "setting ulcon to %08x, brddiv to %d, udivslot %08x\n", + ulcon, quot, udivslot); + + wr_regl(port, S3C2410_ULCON, ulcon); + wr_regl(port, S3C2410_UBRDIV, quot); + + port->status &= ~UPSTAT_AUTOCTS; + + umcon = rd_regl(port, S3C2410_UMCON); + if (termios->c_cflag & CRTSCTS) { + umcon |= S3C2410_UMCOM_AFC; + /* Disable RTS when RX FIFO contains 63 bytes */ + umcon &= ~S3C2412_UMCON_AFC_8; + port->status = UPSTAT_AUTOCTS; + } else { + umcon &= ~S3C2410_UMCOM_AFC; + } + wr_regl(port, S3C2410_UMCON, umcon); + + if (ourport->info->has_divslot) + wr_regl(port, S3C2443_DIVSLOT, udivslot); + + dev_dbg(port->dev, + "uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n", + rd_regl(port, S3C2410_ULCON), + rd_regl(port, S3C2410_UCON), + rd_regl(port, S3C2410_UFCON)); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + /* + * Which character status flags are we interested in? + */ + port->read_status_mask = S3C2410_UERSTAT_OVERRUN; + if (termios->c_iflag & INPCK) + port->read_status_mask |= S3C2410_UERSTAT_FRAME | + S3C2410_UERSTAT_PARITY; + /* + * Which character status flags should we ignore? + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= S3C2410_UERSTAT_OVERRUN; + if (termios->c_iflag & IGNBRK && termios->c_iflag & IGNPAR) + port->ignore_status_mask |= S3C2410_UERSTAT_FRAME; + + /* + * Ignore all characters if CREAD is not set. + */ + if ((termios->c_cflag & CREAD) == 0) + port->ignore_status_mask |= RXSTAT_DUMMY_READ; + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *s3c24xx_serial_type(struct uart_port *port) +{ + switch (port->type) { + case PORT_S3C2410: + return "S3C2410"; + case PORT_S3C2440: + return "S3C2440"; + case PORT_S3C2412: + return "S3C2412"; + case PORT_S3C6400: + return "S3C6400/10"; + default: + return NULL; + } +} + +#define MAP_SIZE (0x100) + +static void s3c24xx_serial_release_port(struct uart_port *port) +{ + release_mem_region(port->mapbase, MAP_SIZE); +} + +static int s3c24xx_serial_request_port(struct uart_port *port) +{ + const char *name = s3c24xx_serial_portname(port); + + return request_mem_region(port->mapbase, MAP_SIZE, name) ? 0 : -EBUSY; +} + +static void s3c24xx_serial_config_port(struct uart_port *port, int flags) +{ + struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + + if (flags & UART_CONFIG_TYPE && + s3c24xx_serial_request_port(port) == 0) + port->type = info->type; +} + +/* + * verify the new serial_struct (for TIOCSSERIAL). + */ +static int +s3c24xx_serial_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + + if (ser->type != PORT_UNKNOWN && ser->type != info->type) + return -EINVAL; + + return 0; +} + +#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE + +static struct console s3c24xx_serial_console; + +static int __init s3c24xx_serial_console_init(void) +{ + register_console(&s3c24xx_serial_console); + return 0; +} +console_initcall(s3c24xx_serial_console_init); + +#define S3C24XX_SERIAL_CONSOLE &s3c24xx_serial_console +#else +#define S3C24XX_SERIAL_CONSOLE NULL +#endif + +#if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL) +static int s3c24xx_serial_get_poll_char(struct uart_port *port); +static void s3c24xx_serial_put_poll_char(struct uart_port *port, + unsigned char c); +#endif + +static struct uart_ops s3c24xx_serial_ops = { + .pm = s3c24xx_serial_pm, + .tx_empty = s3c24xx_serial_tx_empty, + .get_mctrl = s3c24xx_serial_get_mctrl, + .set_mctrl = s3c24xx_serial_set_mctrl, + .stop_tx = s3c24xx_serial_stop_tx, + .start_tx = s3c24xx_serial_start_tx, + .stop_rx = s3c24xx_serial_stop_rx, + .break_ctl = s3c24xx_serial_break_ctl, + .startup = s3c24xx_serial_startup, + .shutdown = s3c24xx_serial_shutdown, + .set_termios = s3c24xx_serial_set_termios, + .type = s3c24xx_serial_type, + .release_port = s3c24xx_serial_release_port, + .request_port = s3c24xx_serial_request_port, + .config_port = s3c24xx_serial_config_port, + .verify_port = s3c24xx_serial_verify_port, +#if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL) + .poll_get_char = s3c24xx_serial_get_poll_char, + .poll_put_char = s3c24xx_serial_put_poll_char, +#endif +}; + +static struct uart_driver s3c24xx_uart_drv = { + .owner = THIS_MODULE, + .driver_name = "s3c2410_serial", + .nr = CONFIG_SERIAL_SAMSUNG_UARTS, + .cons = S3C24XX_SERIAL_CONSOLE, + .dev_name = S3C24XX_SERIAL_NAME, + .major = S3C24XX_SERIAL_MAJOR, + .minor = S3C24XX_SERIAL_MINOR, +}; + +#define __PORT_LOCK_UNLOCKED(i) \ + __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[i].port.lock) +static struct s3c24xx_uart_port +s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS] = { + [0] = { + .port = { + .lock = __PORT_LOCK_UNLOCKED(0), + .iotype = UPIO_MEM, + .uartclk = 0, + .fifosize = 16, + .ops = &s3c24xx_serial_ops, + .flags = UPF_BOOT_AUTOCONF, + .line = 0, + } + }, + [1] = { + .port = { + .lock = __PORT_LOCK_UNLOCKED(1), + .iotype = UPIO_MEM, + .uartclk = 0, + .fifosize = 16, + .ops = &s3c24xx_serial_ops, + .flags = UPF_BOOT_AUTOCONF, + .line = 1, + } + }, +#if CONFIG_SERIAL_SAMSUNG_UARTS > 2 + [2] = { + .port = { + .lock = __PORT_LOCK_UNLOCKED(2), + .iotype = UPIO_MEM, + .uartclk = 0, + .fifosize = 16, + .ops = &s3c24xx_serial_ops, + .flags = UPF_BOOT_AUTOCONF, + .line = 2, + } + }, +#endif +#if CONFIG_SERIAL_SAMSUNG_UARTS > 3 + [3] = { + .port = { + .lock = __PORT_LOCK_UNLOCKED(3), + .iotype = UPIO_MEM, + .uartclk = 0, + .fifosize = 16, + .ops = &s3c24xx_serial_ops, + .flags = UPF_BOOT_AUTOCONF, + .line = 3, + } + } +#endif +}; +#undef __PORT_LOCK_UNLOCKED + +/* s3c24xx_serial_resetport + * + * reset the fifos and other the settings. + */ + +static void s3c24xx_serial_resetport(struct uart_port *port, + struct s3c2410_uartcfg *cfg) +{ + struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + unsigned long ucon = rd_regl(port, S3C2410_UCON); + unsigned int ucon_mask; + + ucon_mask = info->clksel_mask; + if (info->type == PORT_S3C2440) + ucon_mask |= S3C2440_UCON0_DIVMASK; + + ucon &= ucon_mask; + wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); + + /* reset both fifos */ + wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); + wr_regl(port, S3C2410_UFCON, cfg->ufcon); + + /* some delay is required after fifo reset */ + udelay(1); +} + +#ifdef CONFIG_ARM_S3C24XX_CPUFREQ + +static int s3c24xx_serial_cpufreq_transition(struct notifier_block *nb, + unsigned long val, void *data) +{ + struct s3c24xx_uart_port *port; + struct uart_port *uport; + + port = container_of(nb, struct s3c24xx_uart_port, freq_transition); + uport = &port->port; + + /* check to see if port is enabled */ + + if (port->pm_level != 0) + return 0; + + /* try and work out if the baudrate is changing, we can detect + * a change in rate, but we do not have support for detecting + * a disturbance in the clock-rate over the change. + */ + + if (IS_ERR(port->baudclk)) + goto exit; + + if (port->baudclk_rate == clk_get_rate(port->baudclk)) + goto exit; + + if (val == CPUFREQ_PRECHANGE) { + /* we should really shut the port down whilst the + * frequency change is in progress. + */ + + } else if (val == CPUFREQ_POSTCHANGE) { + struct ktermios *termios; + struct tty_struct *tty; + + if (uport->state == NULL) + goto exit; + + tty = uport->state->port.tty; + + if (tty == NULL) + goto exit; + + termios = &tty->termios; + + if (termios == NULL) { + dev_warn(uport->dev, "%s: no termios?\n", __func__); + goto exit; + } + + s3c24xx_serial_set_termios(uport, termios, NULL); + } + +exit: + return 0; +} + +static inline int +s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port) +{ + port->freq_transition.notifier_call = s3c24xx_serial_cpufreq_transition; + + return cpufreq_register_notifier(&port->freq_transition, + CPUFREQ_TRANSITION_NOTIFIER); +} + +static inline void +s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port) +{ + cpufreq_unregister_notifier(&port->freq_transition, + CPUFREQ_TRANSITION_NOTIFIER); +} + +#else +static inline int +s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port) +{ + return 0; +} + +static inline void +s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port) +{ +} +#endif + +static int s3c24xx_serial_enable_baudclk(struct s3c24xx_uart_port *ourport) +{ + struct device *dev = ourport->port.dev; + struct s3c24xx_uart_info *info = ourport->info; + char clk_name[MAX_CLK_NAME_LENGTH]; + unsigned int clk_sel; + struct clk *clk; + int clk_num; + int ret; + + clk_sel = ourport->cfg->clk_sel ? : info->def_clk_sel; + for (clk_num = 0; clk_num < info->num_clks; clk_num++) { + if (!(clk_sel & (1 << clk_num))) + continue; + + sprintf(clk_name, "clk_uart_baud%d", clk_num); + clk = clk_get(dev, clk_name); + if (IS_ERR(clk)) + continue; + + ret = clk_prepare_enable(clk); + if (ret) { + clk_put(clk); + continue; + } + + ourport->baudclk = clk; + ourport->baudclk_rate = clk_get_rate(clk); + s3c24xx_serial_setsource(&ourport->port, clk_num); + + return 0; + } + + return -EINVAL; +} + +/* s3c24xx_serial_init_port + * + * initialise a single serial port from the platform device given + */ + +static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, + struct platform_device *platdev) +{ + struct uart_port *port = &ourport->port; + struct s3c2410_uartcfg *cfg = ourport->cfg; + struct resource *res; + int ret; + + if (platdev == NULL) + return -ENODEV; + + if (port->mapbase != 0) + return -EINVAL; + + /* setup info for port */ + port->dev = &platdev->dev; + + /* Startup sequence is different for s3c64xx and higher SoC's */ + if (s3c24xx_serial_has_interrupt_mask(port)) + s3c24xx_serial_ops.startup = s3c64xx_serial_startup; + + port->uartclk = 1; + + if (cfg->uart_flags & UPF_CONS_FLOW) { + dev_dbg(port->dev, "enabling flow control\n"); + port->flags |= UPF_CONS_FLOW; + } + + /* sort our the physical and virtual addresses for each UART */ + + res = platform_get_resource(platdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(port->dev, "failed to find memory resource for uart\n"); + return -EINVAL; + } + + dev_dbg(port->dev, "resource %pR)\n", res); + + port->membase = devm_ioremap(port->dev, res->start, resource_size(res)); + if (!port->membase) { + dev_err(port->dev, "failed to remap controller address\n"); + return -EBUSY; + } + + port->mapbase = res->start; + ret = platform_get_irq(platdev, 0); + if (ret < 0) { + port->irq = 0; + } else { + port->irq = ret; + ourport->rx_irq = ret; + ourport->tx_irq = ret + 1; + } + + if (!s3c24xx_serial_has_interrupt_mask(port)) { + ret = platform_get_irq(platdev, 1); + if (ret > 0) + ourport->tx_irq = ret; + } + /* + * DMA is currently supported only on DT platforms, if DMA properties + * are specified. + */ + if (platdev->dev.of_node && of_find_property(platdev->dev.of_node, + "dmas", NULL)) { + ourport->dma = devm_kzalloc(port->dev, + sizeof(*ourport->dma), + GFP_KERNEL); + if (!ourport->dma) { + ret = -ENOMEM; + goto err; + } + } + + ourport->clk = clk_get(&platdev->dev, "uart"); + if (IS_ERR(ourport->clk)) { + pr_err("%s: Controller clock not found\n", + dev_name(&platdev->dev)); + ret = PTR_ERR(ourport->clk); + goto err; + } + + ret = clk_prepare_enable(ourport->clk); + if (ret) { + pr_err("uart: clock failed to prepare+enable: %d\n", ret); + clk_put(ourport->clk); + goto err; + } + + ret = s3c24xx_serial_enable_baudclk(ourport); + if (ret) + pr_warn("uart: failed to enable baudclk\n"); + + /* Keep all interrupts masked and cleared */ + if (s3c24xx_serial_has_interrupt_mask(port)) { + wr_regl(port, S3C64XX_UINTM, 0xf); + wr_regl(port, S3C64XX_UINTP, 0xf); + wr_regl(port, S3C64XX_UINTSP, 0xf); + } + + dev_dbg(port->dev, "port: map=%pa, mem=%p, irq=%d (%d,%d), clock=%u\n", + &port->mapbase, port->membase, port->irq, + ourport->rx_irq, ourport->tx_irq, port->uartclk); + + /* reset the fifos (and setup the uart) */ + s3c24xx_serial_resetport(port, cfg); + + return 0; + +err: + port->mapbase = 0; + return ret; +} + +/* Device driver serial port probe */ + +#ifdef CONFIG_OF +static const struct of_device_id s3c24xx_uart_dt_match[]; +#endif + +static int probe_index; + +static inline struct s3c24xx_serial_drv_data * +s3c24xx_get_driver_data(struct platform_device *pdev) +{ +#ifdef CONFIG_OF + if (pdev->dev.of_node) { + const struct of_device_id *match; + + match = of_match_node(s3c24xx_uart_dt_match, pdev->dev.of_node); + return (struct s3c24xx_serial_drv_data *)match->data; + } +#endif + return (struct s3c24xx_serial_drv_data *) + platform_get_device_id(pdev)->driver_data; +} + +static int s3c24xx_serial_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct s3c24xx_uart_port *ourport; + int index = probe_index; + int ret, prop = 0; + + if (np) { + ret = of_alias_get_id(np, "serial"); + if (ret >= 0) + index = ret; + } + + if (index >= ARRAY_SIZE(s3c24xx_serial_ports)) { + dev_err(&pdev->dev, "serial%d out of range\n", index); + return -EINVAL; + } + ourport = &s3c24xx_serial_ports[index]; + + ourport->drv_data = s3c24xx_get_driver_data(pdev); + if (!ourport->drv_data) { + dev_err(&pdev->dev, "could not find driver data\n"); + return -ENODEV; + } + + ourport->baudclk = ERR_PTR(-EINVAL); + ourport->info = ourport->drv_data->info; + ourport->cfg = (dev_get_platdata(&pdev->dev)) ? + dev_get_platdata(&pdev->dev) : + ourport->drv_data->def_cfg; + + if (np) { + of_property_read_u32(np, + "samsung,uart-fifosize", &ourport->port.fifosize); + + if (of_property_read_u32(np, "reg-io-width", &prop) == 0) { + switch (prop) { + case 1: + ourport->port.iotype = UPIO_MEM; + break; + case 4: + ourport->port.iotype = UPIO_MEM32; + break; + default: + dev_warn(&pdev->dev, "unsupported reg-io-width (%d)\n", + prop); + ret = -EINVAL; + break; + } + } + } + + if (ourport->drv_data->fifosize[index]) + ourport->port.fifosize = ourport->drv_data->fifosize[index]; + else if (ourport->info->fifosize) + ourport->port.fifosize = ourport->info->fifosize; + ourport->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_SAMSUNG_CONSOLE); + + /* + * DMA transfers must be aligned at least to cache line size, + * so find minimal transfer size suitable for DMA mode + */ + ourport->min_dma_size = max_t(int, ourport->port.fifosize, + dma_get_cache_alignment()); + + dev_dbg(&pdev->dev, "%s: initialising port %p...\n", __func__, ourport); + + ret = s3c24xx_serial_init_port(ourport, pdev); + if (ret < 0) + return ret; + + if (!s3c24xx_uart_drv.state) { + ret = uart_register_driver(&s3c24xx_uart_drv); + if (ret < 0) { + pr_err("Failed to register Samsung UART driver\n"); + return ret; + } + } + + dev_dbg(&pdev->dev, "%s: adding port\n", __func__); + uart_add_one_port(&s3c24xx_uart_drv, &ourport->port); + platform_set_drvdata(pdev, &ourport->port); + + /* + * Deactivate the clock enabled in s3c24xx_serial_init_port here, + * so that a potential re-enablement through the pm-callback overlaps + * and keeps the clock enabled in this case. + */ + clk_disable_unprepare(ourport->clk); + if (!IS_ERR(ourport->baudclk)) + clk_disable_unprepare(ourport->baudclk); + + ret = s3c24xx_serial_cpufreq_register(ourport); + if (ret < 0) + dev_err(&pdev->dev, "failed to add cpufreq notifier\n"); + + probe_index++; + + return 0; +} + +static int s3c24xx_serial_remove(struct platform_device *dev) +{ + struct uart_port *port = s3c24xx_dev_to_port(&dev->dev); + + if (port) { + s3c24xx_serial_cpufreq_deregister(to_ourport(port)); + uart_remove_one_port(&s3c24xx_uart_drv, port); + } + + uart_unregister_driver(&s3c24xx_uart_drv); + + return 0; +} + +/* UART power management code */ +#ifdef CONFIG_PM_SLEEP +static int s3c24xx_serial_suspend(struct device *dev) +{ + struct uart_port *port = s3c24xx_dev_to_port(dev); + + if (port) + uart_suspend_port(&s3c24xx_uart_drv, port); + + return 0; +} + +static int s3c24xx_serial_resume(struct device *dev) +{ + struct uart_port *port = s3c24xx_dev_to_port(dev); + struct s3c24xx_uart_port *ourport = to_ourport(port); + + if (port) { + clk_prepare_enable(ourport->clk); + if (!IS_ERR(ourport->baudclk)) + clk_prepare_enable(ourport->baudclk); + s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port)); + if (!IS_ERR(ourport->baudclk)) + clk_disable_unprepare(ourport->baudclk); + clk_disable_unprepare(ourport->clk); + + uart_resume_port(&s3c24xx_uart_drv, port); + } + + return 0; +} + +static int s3c24xx_serial_resume_noirq(struct device *dev) +{ + struct uart_port *port = s3c24xx_dev_to_port(dev); + struct s3c24xx_uart_port *ourport = to_ourport(port); + + if (port) { + /* restore IRQ mask */ + if (s3c24xx_serial_has_interrupt_mask(port)) { + unsigned int uintm = 0xf; + + if (ourport->tx_enabled) + uintm &= ~S3C64XX_UINTM_TXD_MSK; + if (ourport->rx_enabled) + uintm &= ~S3C64XX_UINTM_RXD_MSK; + clk_prepare_enable(ourport->clk); + if (!IS_ERR(ourport->baudclk)) + clk_prepare_enable(ourport->baudclk); + wr_regl(port, S3C64XX_UINTM, uintm); + if (!IS_ERR(ourport->baudclk)) + clk_disable_unprepare(ourport->baudclk); + clk_disable_unprepare(ourport->clk); + } + } + + return 0; +} + +static const struct dev_pm_ops s3c24xx_serial_pm_ops = { + .suspend = s3c24xx_serial_suspend, + .resume = s3c24xx_serial_resume, + .resume_noirq = s3c24xx_serial_resume_noirq, +}; +#define SERIAL_SAMSUNG_PM_OPS (&s3c24xx_serial_pm_ops) + +#else /* !CONFIG_PM_SLEEP */ + +#define SERIAL_SAMSUNG_PM_OPS NULL +#endif /* CONFIG_PM_SLEEP */ + +/* Console code */ + +#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE + +static struct uart_port *cons_uart; + +static int +s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon) +{ + struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + unsigned long ufstat, utrstat; + + if (ufcon & S3C2410_UFCON_FIFOMODE) { + /* fifo mode - check amount of data in fifo registers... */ + + ufstat = rd_regl(port, S3C2410_UFSTAT); + return (ufstat & info->tx_fifofull) ? 0 : 1; + } + + /* in non-fifo mode, we go and use the tx buffer empty */ + + utrstat = rd_regl(port, S3C2410_UTRSTAT); + return (utrstat & S3C2410_UTRSTAT_TXE) ? 1 : 0; +} + +static bool +s3c24xx_port_configured(unsigned int ucon) +{ + /* consider the serial port configured if the tx/rx mode set */ + return (ucon & 0xf) != 0; +} + +#ifdef CONFIG_CONSOLE_POLL +/* + * Console polling routines for writing and reading from the uart while + * in an interrupt or debug context. + */ + +static int s3c24xx_serial_get_poll_char(struct uart_port *port) +{ + struct s3c24xx_uart_port *ourport = to_ourport(port); + unsigned int ufstat; + + ufstat = rd_regl(port, S3C2410_UFSTAT); + if (s3c24xx_serial_rx_fifocnt(ourport, ufstat) == 0) + return NO_POLL_CHAR; + + return rd_reg(port, S3C2410_URXH); +} + +static void s3c24xx_serial_put_poll_char(struct uart_port *port, + unsigned char c) +{ + unsigned int ufcon = rd_regl(port, S3C2410_UFCON); + unsigned int ucon = rd_regl(port, S3C2410_UCON); + + /* not possible to xmit on unconfigured port */ + if (!s3c24xx_port_configured(ucon)) + return; + + while (!s3c24xx_serial_console_txrdy(port, ufcon)) + cpu_relax(); + wr_reg(port, S3C2410_UTXH, c); +} + +#endif /* CONFIG_CONSOLE_POLL */ + +static void +s3c24xx_serial_console_putchar(struct uart_port *port, int ch) +{ + unsigned int ufcon = rd_regl(port, S3C2410_UFCON); + + while (!s3c24xx_serial_console_txrdy(port, ufcon)) + cpu_relax(); + wr_reg(port, S3C2410_UTXH, ch); +} + +static void +s3c24xx_serial_console_write(struct console *co, const char *s, + unsigned int count) +{ + unsigned int ucon = rd_regl(cons_uart, S3C2410_UCON); + + /* not possible to xmit on unconfigured port */ + if (!s3c24xx_port_configured(ucon)) + return; + + uart_console_write(cons_uart, s, count, s3c24xx_serial_console_putchar); +} + +static void __init +s3c24xx_serial_get_options(struct uart_port *port, int *baud, + int *parity, int *bits) +{ + struct clk *clk; + unsigned int ulcon; + unsigned int ucon; + unsigned int ubrdiv; + unsigned long rate; + unsigned int clk_sel; + char clk_name[MAX_CLK_NAME_LENGTH]; + + ulcon = rd_regl(port, S3C2410_ULCON); + ucon = rd_regl(port, S3C2410_UCON); + ubrdiv = rd_regl(port, S3C2410_UBRDIV); + + if (s3c24xx_port_configured(ucon)) { + switch (ulcon & S3C2410_LCON_CSMASK) { + case S3C2410_LCON_CS5: + *bits = 5; + break; + case S3C2410_LCON_CS6: + *bits = 6; + break; + case S3C2410_LCON_CS7: + *bits = 7; + break; + case S3C2410_LCON_CS8: + default: + *bits = 8; + break; + } + + switch (ulcon & S3C2410_LCON_PMASK) { + case S3C2410_LCON_PEVEN: + *parity = 'e'; + break; + + case S3C2410_LCON_PODD: + *parity = 'o'; + break; + + case S3C2410_LCON_PNONE: + default: + *parity = 'n'; + } + + /* now calculate the baud rate */ + + clk_sel = s3c24xx_serial_getsource(port); + sprintf(clk_name, "clk_uart_baud%d", clk_sel); + + clk = clk_get(port->dev, clk_name); + if (!IS_ERR(clk)) + rate = clk_get_rate(clk); + else + rate = 1; + + *baud = rate / (16 * (ubrdiv + 1)); + dev_dbg(port->dev, "calculated baud %d\n", *baud); + } +} + +static int __init +s3c24xx_serial_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* is this a valid port */ + + if (co->index == -1 || co->index >= CONFIG_SERIAL_SAMSUNG_UARTS) + co->index = 0; + + port = &s3c24xx_serial_ports[co->index].port; + + /* is the port configured? */ + + if (port->mapbase == 0x0) + return -ENODEV; + + cons_uart = port; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + s3c24xx_serial_get_options(port, &baud, &parity, &bits); + + dev_dbg(port->dev, "baud %d\n", baud); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct console s3c24xx_serial_console = { + .name = S3C24XX_SERIAL_NAME, + .device = uart_console_device, + .flags = CON_PRINTBUFFER, + .index = -1, + .write = s3c24xx_serial_console_write, + .setup = s3c24xx_serial_console_setup, + .data = &s3c24xx_uart_drv, +}; +#endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */ + +#ifdef CONFIG_CPU_S3C2410 +static struct s3c24xx_serial_drv_data s3c2410_serial_drv_data = { + .info = &(struct s3c24xx_uart_info) { + .name = "Samsung S3C2410 UART", + .type = PORT_S3C2410, + .fifosize = 16, + .rx_fifomask = S3C2410_UFSTAT_RXMASK, + .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT, + .rx_fifofull = S3C2410_UFSTAT_RXFULL, + .tx_fifofull = S3C2410_UFSTAT_TXFULL, + .tx_fifomask = S3C2410_UFSTAT_TXMASK, + .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT, + .def_clk_sel = S3C2410_UCON_CLKSEL0, + .num_clks = 2, + .clksel_mask = S3C2410_UCON_CLKMASK, + .clksel_shift = S3C2410_UCON_CLKSHIFT, + }, + .def_cfg = &(struct s3c2410_uartcfg) { + .ucon = S3C2410_UCON_DEFAULT, + .ufcon = S3C2410_UFCON_DEFAULT, + }, +}; +#define S3C2410_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2410_serial_drv_data) +#else +#define S3C2410_SERIAL_DRV_DATA (kernel_ulong_t)NULL +#endif + +#ifdef CONFIG_CPU_S3C2412 +static struct s3c24xx_serial_drv_data s3c2412_serial_drv_data = { + .info = &(struct s3c24xx_uart_info) { + .name = "Samsung S3C2412 UART", + .type = PORT_S3C2412, + .fifosize = 64, + .has_divslot = 1, + .rx_fifomask = S3C2440_UFSTAT_RXMASK, + .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, + .rx_fifofull = S3C2440_UFSTAT_RXFULL, + .tx_fifofull = S3C2440_UFSTAT_TXFULL, + .tx_fifomask = S3C2440_UFSTAT_TXMASK, + .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, + .def_clk_sel = S3C2410_UCON_CLKSEL2, + .num_clks = 4, + .clksel_mask = S3C2412_UCON_CLKMASK, + .clksel_shift = S3C2412_UCON_CLKSHIFT, + }, + .def_cfg = &(struct s3c2410_uartcfg) { + .ucon = S3C2410_UCON_DEFAULT, + .ufcon = S3C2410_UFCON_DEFAULT, + }, +}; +#define S3C2412_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2412_serial_drv_data) +#else +#define S3C2412_SERIAL_DRV_DATA (kernel_ulong_t)NULL +#endif + +#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2416) || \ + defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2442) +static struct s3c24xx_serial_drv_data s3c2440_serial_drv_data = { + .info = &(struct s3c24xx_uart_info) { + .name = "Samsung S3C2440 UART", + .type = PORT_S3C2440, + .fifosize = 64, + .has_divslot = 1, + .rx_fifomask = S3C2440_UFSTAT_RXMASK, + .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, + .rx_fifofull = S3C2440_UFSTAT_RXFULL, + .tx_fifofull = S3C2440_UFSTAT_TXFULL, + .tx_fifomask = S3C2440_UFSTAT_TXMASK, + .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, + .def_clk_sel = S3C2410_UCON_CLKSEL2, + .num_clks = 4, + .clksel_mask = S3C2412_UCON_CLKMASK, + .clksel_shift = S3C2412_UCON_CLKSHIFT, + }, + .def_cfg = &(struct s3c2410_uartcfg) { + .ucon = S3C2410_UCON_DEFAULT, + .ufcon = S3C2410_UFCON_DEFAULT, + }, +}; +#define S3C2440_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2440_serial_drv_data) +#else +#define S3C2440_SERIAL_DRV_DATA (kernel_ulong_t)NULL +#endif + +#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410) +static struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = { + .info = &(struct s3c24xx_uart_info) { + .name = "Samsung S3C6400 UART", + .type = PORT_S3C6400, + .fifosize = 64, + .has_divslot = 1, + .rx_fifomask = S3C2440_UFSTAT_RXMASK, + .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, + .rx_fifofull = S3C2440_UFSTAT_RXFULL, + .tx_fifofull = S3C2440_UFSTAT_TXFULL, + .tx_fifomask = S3C2440_UFSTAT_TXMASK, + .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, + .def_clk_sel = S3C2410_UCON_CLKSEL2, + .num_clks = 4, + .clksel_mask = S3C6400_UCON_CLKMASK, + .clksel_shift = S3C6400_UCON_CLKSHIFT, + }, + .def_cfg = &(struct s3c2410_uartcfg) { + .ucon = S3C2410_UCON_DEFAULT, + .ufcon = S3C2410_UFCON_DEFAULT, + }, +}; +#define S3C6400_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c6400_serial_drv_data) +#else +#define S3C6400_SERIAL_DRV_DATA (kernel_ulong_t)NULL +#endif + +#ifdef CONFIG_CPU_S5PV210 +static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = { + .info = &(struct s3c24xx_uart_info) { + .name = "Samsung S5PV210 UART", + .type = PORT_S3C6400, + .has_divslot = 1, + .rx_fifomask = S5PV210_UFSTAT_RXMASK, + .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, + .rx_fifofull = S5PV210_UFSTAT_RXFULL, + .tx_fifofull = S5PV210_UFSTAT_TXFULL, + .tx_fifomask = S5PV210_UFSTAT_TXMASK, + .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, + .def_clk_sel = S3C2410_UCON_CLKSEL0, + .num_clks = 2, + .clksel_mask = S5PV210_UCON_CLKMASK, + .clksel_shift = S5PV210_UCON_CLKSHIFT, + }, + .def_cfg = &(struct s3c2410_uartcfg) { + .ucon = S5PV210_UCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + }, + .fifosize = { 256, 64, 16, 16 }, +}; +#define S5PV210_SERIAL_DRV_DATA ((kernel_ulong_t)&s5pv210_serial_drv_data) +#else +#define S5PV210_SERIAL_DRV_DATA (kernel_ulong_t)NULL +#endif + +#if defined(CONFIG_ARCH_EXYNOS) +#define EXYNOS_COMMON_SERIAL_DRV_DATA \ + .info = &(struct s3c24xx_uart_info) { \ + .name = "Samsung Exynos UART", \ + .type = PORT_S3C6400, \ + .has_divslot = 1, \ + .rx_fifomask = S5PV210_UFSTAT_RXMASK, \ + .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, \ + .rx_fifofull = S5PV210_UFSTAT_RXFULL, \ + .tx_fifofull = S5PV210_UFSTAT_TXFULL, \ + .tx_fifomask = S5PV210_UFSTAT_TXMASK, \ + .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, \ + .def_clk_sel = S3C2410_UCON_CLKSEL0, \ + .num_clks = 1, \ + .clksel_mask = 0, \ + .clksel_shift = 0, \ + }, \ + .def_cfg = &(struct s3c2410_uartcfg) { \ + .ucon = S5PV210_UCON_DEFAULT, \ + .ufcon = S5PV210_UFCON_DEFAULT, \ + .has_fracval = 1, \ + } \ + +static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = { + EXYNOS_COMMON_SERIAL_DRV_DATA, + .fifosize = { 256, 64, 16, 16 }, +}; + +static struct s3c24xx_serial_drv_data exynos5433_serial_drv_data = { + EXYNOS_COMMON_SERIAL_DRV_DATA, + .fifosize = { 64, 256, 16, 256 }, +}; + +#define EXYNOS4210_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos4210_serial_drv_data) +#define EXYNOS5433_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos5433_serial_drv_data) +#else +#define EXYNOS4210_SERIAL_DRV_DATA (kernel_ulong_t)NULL +#define EXYNOS5433_SERIAL_DRV_DATA (kernel_ulong_t)NULL +#endif + +static const struct platform_device_id s3c24xx_serial_driver_ids[] = { + { + .name = "s3c2410-uart", + .driver_data = S3C2410_SERIAL_DRV_DATA, + }, { + .name = "s3c2412-uart", + .driver_data = S3C2412_SERIAL_DRV_DATA, + }, { + .name = "s3c2440-uart", + .driver_data = S3C2440_SERIAL_DRV_DATA, + }, { + .name = "s3c6400-uart", + .driver_data = S3C6400_SERIAL_DRV_DATA, + }, { + .name = "s5pv210-uart", + .driver_data = S5PV210_SERIAL_DRV_DATA, + }, { + .name = "exynos4210-uart", + .driver_data = EXYNOS4210_SERIAL_DRV_DATA, + }, { + .name = "exynos5433-uart", + .driver_data = EXYNOS5433_SERIAL_DRV_DATA, + }, + { }, +}; +MODULE_DEVICE_TABLE(platform, s3c24xx_serial_driver_ids); + +#ifdef CONFIG_OF +static const struct of_device_id s3c24xx_uart_dt_match[] = { + { .compatible = "samsung,s3c2410-uart", + .data = (void *)S3C2410_SERIAL_DRV_DATA }, + { .compatible = "samsung,s3c2412-uart", + .data = (void *)S3C2412_SERIAL_DRV_DATA }, + { .compatible = "samsung,s3c2440-uart", + .data = (void *)S3C2440_SERIAL_DRV_DATA }, + { .compatible = "samsung,s3c6400-uart", + .data = (void *)S3C6400_SERIAL_DRV_DATA }, + { .compatible = "samsung,s5pv210-uart", + .data = (void *)S5PV210_SERIAL_DRV_DATA }, + { .compatible = "samsung,exynos4210-uart", + .data = (void *)EXYNOS4210_SERIAL_DRV_DATA }, + { .compatible = "samsung,exynos5433-uart", + .data = (void *)EXYNOS5433_SERIAL_DRV_DATA }, + {}, +}; +MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match); +#endif + +static struct platform_driver samsung_serial_driver = { + .probe = s3c24xx_serial_probe, + .remove = s3c24xx_serial_remove, + .id_table = s3c24xx_serial_driver_ids, + .driver = { + .name = "samsung-uart", + .pm = SERIAL_SAMSUNG_PM_OPS, + .of_match_table = of_match_ptr(s3c24xx_uart_dt_match), + }, +}; + +module_platform_driver(samsung_serial_driver); + +#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE +/* + * Early console. + */ + +static void wr_reg_barrier(struct uart_port *port, u32 reg, u32 val) +{ + switch (port->iotype) { + case UPIO_MEM: + writeb(val, portaddr(port, reg)); + break; + case UPIO_MEM32: + writel(val, portaddr(port, reg)); + break; + } +} + +struct samsung_early_console_data { + u32 txfull_mask; +}; + +static void samsung_early_busyuart(struct uart_port *port) +{ + while (!(readl(port->membase + S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXFE)) + ; +} + +static void samsung_early_busyuart_fifo(struct uart_port *port) +{ + struct samsung_early_console_data *data = port->private_data; + + while (readl(port->membase + S3C2410_UFSTAT) & data->txfull_mask) + ; +} + +static void samsung_early_putc(struct uart_port *port, int c) +{ + if (readl(port->membase + S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) + samsung_early_busyuart_fifo(port); + else + samsung_early_busyuart(port); + + wr_reg_barrier(port, S3C2410_UTXH, c); +} + +static void samsung_early_write(struct console *con, const char *s, + unsigned int n) +{ + struct earlycon_device *dev = con->data; + + uart_console_write(&dev->port, s, n, samsung_early_putc); +} + +static int __init samsung_early_console_setup(struct earlycon_device *device, + const char *opt) +{ + if (!device->port.membase) + return -ENODEV; + + device->con->write = samsung_early_write; + return 0; +} + +/* S3C2410 */ +static struct samsung_early_console_data s3c2410_early_console_data = { + .txfull_mask = S3C2410_UFSTAT_TXFULL, +}; + +static int __init s3c2410_early_console_setup(struct earlycon_device *device, + const char *opt) +{ + device->port.private_data = &s3c2410_early_console_data; + return samsung_early_console_setup(device, opt); +} + +OF_EARLYCON_DECLARE(s3c2410, "samsung,s3c2410-uart", + s3c2410_early_console_setup); + +/* S3C2412, S3C2440, S3C64xx */ +static struct samsung_early_console_data s3c2440_early_console_data = { + .txfull_mask = S3C2440_UFSTAT_TXFULL, +}; + +static int __init s3c2440_early_console_setup(struct earlycon_device *device, + const char *opt) +{ + device->port.private_data = &s3c2440_early_console_data; + return samsung_early_console_setup(device, opt); +} + +OF_EARLYCON_DECLARE(s3c2412, "samsung,s3c2412-uart", + s3c2440_early_console_setup); +OF_EARLYCON_DECLARE(s3c2440, "samsung,s3c2440-uart", + s3c2440_early_console_setup); +OF_EARLYCON_DECLARE(s3c6400, "samsung,s3c6400-uart", + s3c2440_early_console_setup); + +/* S5PV210, Exynos */ +static struct samsung_early_console_data s5pv210_early_console_data = { + .txfull_mask = S5PV210_UFSTAT_TXFULL, +}; + +static int __init s5pv210_early_console_setup(struct earlycon_device *device, + const char *opt) +{ + device->port.private_data = &s5pv210_early_console_data; + return samsung_early_console_setup(device, opt); +} + +OF_EARLYCON_DECLARE(s5pv210, "samsung,s5pv210-uart", + s5pv210_early_console_setup); +OF_EARLYCON_DECLARE(exynos4210, "samsung,exynos4210-uart", + s5pv210_early_console_setup); +#endif + +MODULE_ALIAS("platform:samsung-uart"); +MODULE_DESCRIPTION("Samsung SoC Serial port driver"); +MODULE_AUTHOR("Ben Dooks "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/sb1250-duart.c b/drivers/tty/serial/sb1250-duart.c new file mode 100644 index 000000000..22c7bc90b --- /dev/null +++ b/drivers/tty/serial/sb1250-duart.c @@ -0,0 +1,964 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Support for the asynchronous serial interface (DUART) included + * in the BCM1250 and derived System-On-a-Chip (SOC) devices. + * + * Copyright (c) 2007 Maciej W. Rozycki + * + * Derived from drivers/char/sb1250_duart.c for which the following + * copyright applies: + * + * Copyright (c) 2000, 2001, 2002, 2003, 2004 Broadcom Corporation + * + * References: + * + * "BCM1250/BCM1125/BCM1125H User Manual", Broadcom Corporation + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include + + +#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) +#include +#include + +#define SBD_CHANREGS(line) A_BCM1480_DUART_CHANREG((line), 0) +#define SBD_CTRLREGS(line) A_BCM1480_DUART_CTRLREG((line), 0) +#define SBD_INT(line) (K_BCM1480_INT_UART_0 + (line)) + +#define DUART_CHANREG_SPACING BCM1480_DUART_CHANREG_SPACING + +#define R_DUART_IMRREG(line) R_BCM1480_DUART_IMRREG(line) +#define R_DUART_INCHREG(line) R_BCM1480_DUART_INCHREG(line) +#define R_DUART_ISRREG(line) R_BCM1480_DUART_ISRREG(line) + +#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X) +#include +#include + +#define SBD_CHANREGS(line) A_DUART_CHANREG((line), 0) +#define SBD_CTRLREGS(line) A_DUART_CTRLREG(0) +#define SBD_INT(line) (K_INT_UART_0 + (line)) + +#else +#error invalid SB1250 UART configuration + +#endif + + +MODULE_AUTHOR("Maciej W. Rozycki "); +MODULE_DESCRIPTION("BCM1xxx on-chip DUART serial driver"); +MODULE_LICENSE("GPL"); + + +#define DUART_MAX_CHIP 2 +#define DUART_MAX_SIDE 2 + +/* + * Per-port state. + */ +struct sbd_port { + struct sbd_duart *duart; + struct uart_port port; + unsigned char __iomem *memctrl; + int tx_stopped; + int initialised; +}; + +/* + * Per-DUART state for the shared register space. + */ +struct sbd_duart { + struct sbd_port sport[2]; + unsigned long mapctrl; + refcount_t map_guard; +}; + +#define to_sport(uport) container_of(uport, struct sbd_port, port) + +static struct sbd_duart sbd_duarts[DUART_MAX_CHIP]; + + +/* + * Reading and writing SB1250 DUART registers. + * + * There are three register spaces: two per-channel ones and + * a shared one. We have to define accessors appropriately. + * All registers are 64-bit and all but the Baud Rate Clock + * registers only define 8 least significant bits. There is + * also a workaround to take into account. Raw accessors use + * the full register width, but cooked ones truncate it + * intentionally so that the rest of the driver does not care. + */ +static u64 __read_sbdchn(struct sbd_port *sport, int reg) +{ + void __iomem *csr = sport->port.membase + reg; + + return __raw_readq(csr); +} + +static u64 __read_sbdshr(struct sbd_port *sport, int reg) +{ + void __iomem *csr = sport->memctrl + reg; + + return __raw_readq(csr); +} + +static void __write_sbdchn(struct sbd_port *sport, int reg, u64 value) +{ + void __iomem *csr = sport->port.membase + reg; + + __raw_writeq(value, csr); +} + +static void __write_sbdshr(struct sbd_port *sport, int reg, u64 value) +{ + void __iomem *csr = sport->memctrl + reg; + + __raw_writeq(value, csr); +} + +/* + * In bug 1956, we get glitches that can mess up uart registers. This + * "read-mode-reg after any register access" is an accepted workaround. + */ +static void __war_sbd1956(struct sbd_port *sport) +{ + __read_sbdchn(sport, R_DUART_MODE_REG_1); + __read_sbdchn(sport, R_DUART_MODE_REG_2); +} + +static unsigned char read_sbdchn(struct sbd_port *sport, int reg) +{ + unsigned char retval; + + retval = __read_sbdchn(sport, reg); + if (IS_ENABLED(CONFIG_SB1_PASS_2_WORKAROUNDS)) + __war_sbd1956(sport); + return retval; +} + +static unsigned char read_sbdshr(struct sbd_port *sport, int reg) +{ + unsigned char retval; + + retval = __read_sbdshr(sport, reg); + if (IS_ENABLED(CONFIG_SB1_PASS_2_WORKAROUNDS)) + __war_sbd1956(sport); + return retval; +} + +static void write_sbdchn(struct sbd_port *sport, int reg, unsigned int value) +{ + __write_sbdchn(sport, reg, value); + if (IS_ENABLED(CONFIG_SB1_PASS_2_WORKAROUNDS)) + __war_sbd1956(sport); +} + +static void write_sbdshr(struct sbd_port *sport, int reg, unsigned int value) +{ + __write_sbdshr(sport, reg, value); + if (IS_ENABLED(CONFIG_SB1_PASS_2_WORKAROUNDS)) + __war_sbd1956(sport); +} + + +static int sbd_receive_ready(struct sbd_port *sport) +{ + return read_sbdchn(sport, R_DUART_STATUS) & M_DUART_RX_RDY; +} + +static int sbd_receive_drain(struct sbd_port *sport) +{ + int loops = 10000; + + while (sbd_receive_ready(sport) && --loops) + read_sbdchn(sport, R_DUART_RX_HOLD); + return loops; +} + +static int __maybe_unused sbd_transmit_ready(struct sbd_port *sport) +{ + return read_sbdchn(sport, R_DUART_STATUS) & M_DUART_TX_RDY; +} + +static int __maybe_unused sbd_transmit_drain(struct sbd_port *sport) +{ + int loops = 10000; + + while (!sbd_transmit_ready(sport) && --loops) + udelay(2); + return loops; +} + +static int sbd_transmit_empty(struct sbd_port *sport) +{ + return read_sbdchn(sport, R_DUART_STATUS) & M_DUART_TX_EMT; +} + +static int sbd_line_drain(struct sbd_port *sport) +{ + int loops = 10000; + + while (!sbd_transmit_empty(sport) && --loops) + udelay(2); + return loops; +} + + +static unsigned int sbd_tx_empty(struct uart_port *uport) +{ + struct sbd_port *sport = to_sport(uport); + + return sbd_transmit_empty(sport) ? TIOCSER_TEMT : 0; +} + +static unsigned int sbd_get_mctrl(struct uart_port *uport) +{ + struct sbd_port *sport = to_sport(uport); + unsigned int mctrl, status; + + status = read_sbdshr(sport, R_DUART_IN_PORT); + status >>= (uport->line) % 2; + mctrl = (!(status & M_DUART_IN_PIN0_VAL) ? TIOCM_CTS : 0) | + (!(status & M_DUART_IN_PIN4_VAL) ? TIOCM_CAR : 0) | + (!(status & M_DUART_RIN0_PIN) ? TIOCM_RNG : 0) | + (!(status & M_DUART_IN_PIN2_VAL) ? TIOCM_DSR : 0); + return mctrl; +} + +static void sbd_set_mctrl(struct uart_port *uport, unsigned int mctrl) +{ + struct sbd_port *sport = to_sport(uport); + unsigned int clr = 0, set = 0, mode2; + + if (mctrl & TIOCM_DTR) + set |= M_DUART_SET_OPR2; + else + clr |= M_DUART_CLR_OPR2; + if (mctrl & TIOCM_RTS) + set |= M_DUART_SET_OPR0; + else + clr |= M_DUART_CLR_OPR0; + clr <<= (uport->line) % 2; + set <<= (uport->line) % 2; + + mode2 = read_sbdchn(sport, R_DUART_MODE_REG_2); + mode2 &= ~M_DUART_CHAN_MODE; + if (mctrl & TIOCM_LOOP) + mode2 |= V_DUART_CHAN_MODE_LCL_LOOP; + else + mode2 |= V_DUART_CHAN_MODE_NORMAL; + + write_sbdshr(sport, R_DUART_CLEAR_OPR, clr); + write_sbdshr(sport, R_DUART_SET_OPR, set); + write_sbdchn(sport, R_DUART_MODE_REG_2, mode2); +} + +static void sbd_stop_tx(struct uart_port *uport) +{ + struct sbd_port *sport = to_sport(uport); + + write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_DIS); + sport->tx_stopped = 1; +}; + +static void sbd_start_tx(struct uart_port *uport) +{ + struct sbd_port *sport = to_sport(uport); + unsigned int mask; + + /* Enable tx interrupts. */ + mask = read_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2)); + mask |= M_DUART_IMR_TX; + write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), mask); + + /* Go!, go!, go!... */ + write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_EN); + sport->tx_stopped = 0; +}; + +static void sbd_stop_rx(struct uart_port *uport) +{ + struct sbd_port *sport = to_sport(uport); + + write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), 0); +}; + +static void sbd_enable_ms(struct uart_port *uport) +{ + struct sbd_port *sport = to_sport(uport); + + write_sbdchn(sport, R_DUART_AUXCTL_X, + M_DUART_CIN_CHNG_ENA | M_DUART_CTS_CHNG_ENA); +} + +static void sbd_break_ctl(struct uart_port *uport, int break_state) +{ + struct sbd_port *sport = to_sport(uport); + + if (break_state == -1) + write_sbdchn(sport, R_DUART_CMD, V_DUART_MISC_CMD_START_BREAK); + else + write_sbdchn(sport, R_DUART_CMD, V_DUART_MISC_CMD_STOP_BREAK); +} + + +static void sbd_receive_chars(struct sbd_port *sport) +{ + struct uart_port *uport = &sport->port; + struct uart_icount *icount; + unsigned int status, ch, flag; + int count; + + for (count = 16; count; count--) { + status = read_sbdchn(sport, R_DUART_STATUS); + if (!(status & M_DUART_RX_RDY)) + break; + + ch = read_sbdchn(sport, R_DUART_RX_HOLD); + + flag = TTY_NORMAL; + + icount = &uport->icount; + icount->rx++; + + if (unlikely(status & + (M_DUART_RCVD_BRK | M_DUART_FRM_ERR | + M_DUART_PARITY_ERR | M_DUART_OVRUN_ERR))) { + if (status & M_DUART_RCVD_BRK) { + icount->brk++; + if (uart_handle_break(uport)) + continue; + } else if (status & M_DUART_FRM_ERR) + icount->frame++; + else if (status & M_DUART_PARITY_ERR) + icount->parity++; + if (status & M_DUART_OVRUN_ERR) + icount->overrun++; + + status &= uport->read_status_mask; + if (status & M_DUART_RCVD_BRK) + flag = TTY_BREAK; + else if (status & M_DUART_FRM_ERR) + flag = TTY_FRAME; + else if (status & M_DUART_PARITY_ERR) + flag = TTY_PARITY; + } + + if (uart_handle_sysrq_char(uport, ch)) + continue; + + uart_insert_char(uport, status, M_DUART_OVRUN_ERR, ch, flag); + } + + tty_flip_buffer_push(&uport->state->port); +} + +static void sbd_transmit_chars(struct sbd_port *sport) +{ + struct uart_port *uport = &sport->port; + struct circ_buf *xmit = &sport->port.state->xmit; + unsigned int mask; + int stop_tx; + + /* XON/XOFF chars. */ + if (sport->port.x_char) { + write_sbdchn(sport, R_DUART_TX_HOLD, sport->port.x_char); + sport->port.icount.tx++; + sport->port.x_char = 0; + return; + } + + /* If nothing to do or stopped or hardware stopped. */ + stop_tx = (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)); + + /* Send char. */ + if (!stop_tx) { + write_sbdchn(sport, R_DUART_TX_HOLD, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + sport->port.icount.tx++; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&sport->port); + } + + /* Are we are done? */ + if (stop_tx || uart_circ_empty(xmit)) { + /* Disable tx interrupts. */ + mask = read_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2)); + mask &= ~M_DUART_IMR_TX; + write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), mask); + } +} + +static void sbd_status_handle(struct sbd_port *sport) +{ + struct uart_port *uport = &sport->port; + unsigned int delta; + + delta = read_sbdshr(sport, R_DUART_INCHREG((uport->line) % 2)); + delta >>= (uport->line) % 2; + + if (delta & (M_DUART_IN_PIN0_VAL << S_DUART_IN_PIN_CHNG)) + uart_handle_cts_change(uport, !(delta & M_DUART_IN_PIN0_VAL)); + + if (delta & (M_DUART_IN_PIN2_VAL << S_DUART_IN_PIN_CHNG)) + uport->icount.dsr++; + + if (delta & ((M_DUART_IN_PIN2_VAL | M_DUART_IN_PIN0_VAL) << + S_DUART_IN_PIN_CHNG)) + wake_up_interruptible(&uport->state->port.delta_msr_wait); +} + +static irqreturn_t sbd_interrupt(int irq, void *dev_id) +{ + struct sbd_port *sport = dev_id; + struct uart_port *uport = &sport->port; + irqreturn_t status = IRQ_NONE; + unsigned int intstat; + int count; + + for (count = 16; count; count--) { + intstat = read_sbdshr(sport, + R_DUART_ISRREG((uport->line) % 2)); + intstat &= read_sbdshr(sport, + R_DUART_IMRREG((uport->line) % 2)); + intstat &= M_DUART_ISR_ALL; + if (!intstat) + break; + + if (intstat & M_DUART_ISR_RX) + sbd_receive_chars(sport); + if (intstat & M_DUART_ISR_IN) + sbd_status_handle(sport); + if (intstat & M_DUART_ISR_TX) + sbd_transmit_chars(sport); + + status = IRQ_HANDLED; + } + + return status; +} + + +static int sbd_startup(struct uart_port *uport) +{ + struct sbd_port *sport = to_sport(uport); + unsigned int mode1; + int ret; + + ret = request_irq(sport->port.irq, sbd_interrupt, + IRQF_SHARED, "sb1250-duart", sport); + if (ret) + return ret; + + /* Clear the receive FIFO. */ + sbd_receive_drain(sport); + + /* Clear the interrupt registers. */ + write_sbdchn(sport, R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT); + read_sbdshr(sport, R_DUART_INCHREG((uport->line) % 2)); + + /* Set rx/tx interrupt to FIFO available. */ + mode1 = read_sbdchn(sport, R_DUART_MODE_REG_1); + mode1 &= ~(M_DUART_RX_IRQ_SEL_RXFULL | M_DUART_TX_IRQ_SEL_TXEMPT); + write_sbdchn(sport, R_DUART_MODE_REG_1, mode1); + + /* Disable tx, enable rx. */ + write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_DIS | M_DUART_RX_EN); + sport->tx_stopped = 1; + + /* Enable interrupts. */ + write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), + M_DUART_IMR_IN | M_DUART_IMR_RX); + + return 0; +} + +static void sbd_shutdown(struct uart_port *uport) +{ + struct sbd_port *sport = to_sport(uport); + + write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_DIS | M_DUART_RX_DIS); + sport->tx_stopped = 1; + free_irq(sport->port.irq, sport); +} + + +static void sbd_init_port(struct sbd_port *sport) +{ + struct uart_port *uport = &sport->port; + + if (sport->initialised) + return; + + /* There is no DUART reset feature, so just set some sane defaults. */ + write_sbdchn(sport, R_DUART_CMD, V_DUART_MISC_CMD_RESET_TX); + write_sbdchn(sport, R_DUART_CMD, V_DUART_MISC_CMD_RESET_RX); + write_sbdchn(sport, R_DUART_MODE_REG_1, V_DUART_BITS_PER_CHAR_8); + write_sbdchn(sport, R_DUART_MODE_REG_2, 0); + write_sbdchn(sport, R_DUART_FULL_CTL, + V_DUART_INT_TIME(0) | V_DUART_SIG_FULL(15)); + write_sbdchn(sport, R_DUART_OPCR_X, 0); + write_sbdchn(sport, R_DUART_AUXCTL_X, 0); + write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), 0); + + sport->initialised = 1; +} + +static void sbd_set_termios(struct uart_port *uport, struct ktermios *termios, + struct ktermios *old_termios) +{ + struct sbd_port *sport = to_sport(uport); + unsigned int mode1 = 0, mode2 = 0, aux = 0; + unsigned int mode1mask = 0, mode2mask = 0, auxmask = 0; + unsigned int oldmode1, oldmode2, oldaux; + unsigned int baud, brg; + unsigned int command; + + mode1mask |= ~(M_DUART_PARITY_MODE | M_DUART_PARITY_TYPE_ODD | + M_DUART_BITS_PER_CHAR); + mode2mask |= ~M_DUART_STOP_BIT_LEN_2; + auxmask |= ~M_DUART_CTS_CHNG_ENA; + + /* Byte size. */ + switch (termios->c_cflag & CSIZE) { + case CS5: + case CS6: + /* Unsupported, leave unchanged. */ + mode1mask |= M_DUART_PARITY_MODE; + break; + case CS7: + mode1 |= V_DUART_BITS_PER_CHAR_7; + break; + case CS8: + default: + mode1 |= V_DUART_BITS_PER_CHAR_8; + break; + } + + /* Parity and stop bits. */ + if (termios->c_cflag & CSTOPB) + mode2 |= M_DUART_STOP_BIT_LEN_2; + else + mode2 |= M_DUART_STOP_BIT_LEN_1; + if (termios->c_cflag & PARENB) + mode1 |= V_DUART_PARITY_MODE_ADD; + else + mode1 |= V_DUART_PARITY_MODE_NONE; + if (termios->c_cflag & PARODD) + mode1 |= M_DUART_PARITY_TYPE_ODD; + else + mode1 |= M_DUART_PARITY_TYPE_EVEN; + + baud = uart_get_baud_rate(uport, termios, old_termios, 1200, 5000000); + brg = V_DUART_BAUD_RATE(baud); + /* The actual lower bound is 1221bps, so compensate. */ + if (brg > M_DUART_CLK_COUNTER) + brg = M_DUART_CLK_COUNTER; + + uart_update_timeout(uport, termios->c_cflag, baud); + + uport->read_status_mask = M_DUART_OVRUN_ERR; + if (termios->c_iflag & INPCK) + uport->read_status_mask |= M_DUART_FRM_ERR | + M_DUART_PARITY_ERR; + if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) + uport->read_status_mask |= M_DUART_RCVD_BRK; + + uport->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + uport->ignore_status_mask |= M_DUART_FRM_ERR | + M_DUART_PARITY_ERR; + if (termios->c_iflag & IGNBRK) { + uport->ignore_status_mask |= M_DUART_RCVD_BRK; + if (termios->c_iflag & IGNPAR) + uport->ignore_status_mask |= M_DUART_OVRUN_ERR; + } + + if (termios->c_cflag & CREAD) + command = M_DUART_RX_EN; + else + command = M_DUART_RX_DIS; + + if (termios->c_cflag & CRTSCTS) + aux |= M_DUART_CTS_CHNG_ENA; + else + aux &= ~M_DUART_CTS_CHNG_ENA; + + spin_lock(&uport->lock); + + if (sport->tx_stopped) + command |= M_DUART_TX_DIS; + else + command |= M_DUART_TX_EN; + + oldmode1 = read_sbdchn(sport, R_DUART_MODE_REG_1) & mode1mask; + oldmode2 = read_sbdchn(sport, R_DUART_MODE_REG_2) & mode2mask; + oldaux = read_sbdchn(sport, R_DUART_AUXCTL_X) & auxmask; + + if (!sport->tx_stopped) + sbd_line_drain(sport); + write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_DIS | M_DUART_RX_DIS); + + write_sbdchn(sport, R_DUART_MODE_REG_1, mode1 | oldmode1); + write_sbdchn(sport, R_DUART_MODE_REG_2, mode2 | oldmode2); + write_sbdchn(sport, R_DUART_CLK_SEL, brg); + write_sbdchn(sport, R_DUART_AUXCTL_X, aux | oldaux); + + write_sbdchn(sport, R_DUART_CMD, command); + + spin_unlock(&uport->lock); +} + + +static const char *sbd_type(struct uart_port *uport) +{ + return "SB1250 DUART"; +} + +static void sbd_release_port(struct uart_port *uport) +{ + struct sbd_port *sport = to_sport(uport); + struct sbd_duart *duart = sport->duart; + + iounmap(sport->memctrl); + sport->memctrl = NULL; + iounmap(uport->membase); + uport->membase = NULL; + + if(refcount_dec_and_test(&duart->map_guard)) + release_mem_region(duart->mapctrl, DUART_CHANREG_SPACING); + release_mem_region(uport->mapbase, DUART_CHANREG_SPACING); +} + +static int sbd_map_port(struct uart_port *uport) +{ + const char *err = KERN_ERR "sbd: Cannot map MMIO\n"; + struct sbd_port *sport = to_sport(uport); + struct sbd_duart *duart = sport->duart; + + if (!uport->membase) + uport->membase = ioremap(uport->mapbase, + DUART_CHANREG_SPACING); + if (!uport->membase) { + printk(err); + return -ENOMEM; + } + + if (!sport->memctrl) + sport->memctrl = ioremap(duart->mapctrl, + DUART_CHANREG_SPACING); + if (!sport->memctrl) { + printk(err); + iounmap(uport->membase); + uport->membase = NULL; + return -ENOMEM; + } + + return 0; +} + +static int sbd_request_port(struct uart_port *uport) +{ + const char *err = KERN_ERR "sbd: Unable to reserve MMIO resource\n"; + struct sbd_duart *duart = to_sport(uport)->duart; + int ret = 0; + + if (!request_mem_region(uport->mapbase, DUART_CHANREG_SPACING, + "sb1250-duart")) { + printk(err); + return -EBUSY; + } + refcount_inc(&duart->map_guard); + if (refcount_read(&duart->map_guard) == 1) { + if (!request_mem_region(duart->mapctrl, DUART_CHANREG_SPACING, + "sb1250-duart")) { + refcount_dec(&duart->map_guard); + printk(err); + ret = -EBUSY; + } + } + if (!ret) { + ret = sbd_map_port(uport); + if (ret) { + if (refcount_dec_and_test(&duart->map_guard)) + release_mem_region(duart->mapctrl, + DUART_CHANREG_SPACING); + } + } + if (ret) { + release_mem_region(uport->mapbase, DUART_CHANREG_SPACING); + return ret; + } + return 0; +} + +static void sbd_config_port(struct uart_port *uport, int flags) +{ + struct sbd_port *sport = to_sport(uport); + + if (flags & UART_CONFIG_TYPE) { + if (sbd_request_port(uport)) + return; + + uport->type = PORT_SB1250_DUART; + + sbd_init_port(sport); + } +} + +static int sbd_verify_port(struct uart_port *uport, struct serial_struct *ser) +{ + int ret = 0; + + if (ser->type != PORT_UNKNOWN && ser->type != PORT_SB1250_DUART) + ret = -EINVAL; + if (ser->irq != uport->irq) + ret = -EINVAL; + if (ser->baud_base != uport->uartclk / 16) + ret = -EINVAL; + return ret; +} + + +static const struct uart_ops sbd_ops = { + .tx_empty = sbd_tx_empty, + .set_mctrl = sbd_set_mctrl, + .get_mctrl = sbd_get_mctrl, + .stop_tx = sbd_stop_tx, + .start_tx = sbd_start_tx, + .stop_rx = sbd_stop_rx, + .enable_ms = sbd_enable_ms, + .break_ctl = sbd_break_ctl, + .startup = sbd_startup, + .shutdown = sbd_shutdown, + .set_termios = sbd_set_termios, + .type = sbd_type, + .release_port = sbd_release_port, + .request_port = sbd_request_port, + .config_port = sbd_config_port, + .verify_port = sbd_verify_port, +}; + +/* Initialize SB1250 DUART port structures. */ +static void __init sbd_probe_duarts(void) +{ + static int probed; + int chip, side; + int max_lines, line; + + if (probed) + return; + + /* Set the number of available units based on the SOC type. */ + switch (soc_type) { + case K_SYS_SOC_TYPE_BCM1x55: + case K_SYS_SOC_TYPE_BCM1x80: + max_lines = 4; + break; + default: + /* Assume at least two serial ports at the normal address. */ + max_lines = 2; + break; + } + + probed = 1; + + for (chip = 0, line = 0; chip < DUART_MAX_CHIP && line < max_lines; + chip++) { + sbd_duarts[chip].mapctrl = SBD_CTRLREGS(line); + + for (side = 0; side < DUART_MAX_SIDE && line < max_lines; + side++, line++) { + struct sbd_port *sport = &sbd_duarts[chip].sport[side]; + struct uart_port *uport = &sport->port; + + sport->duart = &sbd_duarts[chip]; + + uport->irq = SBD_INT(line); + uport->uartclk = 100000000 / 20 * 16; + uport->fifosize = 16; + uport->iotype = UPIO_MEM; + uport->flags = UPF_BOOT_AUTOCONF; + uport->ops = &sbd_ops; + uport->line = line; + uport->mapbase = SBD_CHANREGS(line); + uport->has_sysrq = IS_ENABLED(CONFIG_SERIAL_SB1250_DUART_CONSOLE); + } + } +} + + +#ifdef CONFIG_SERIAL_SB1250_DUART_CONSOLE +/* + * Serial console stuff. Very basic, polling driver for doing serial + * console output. The console_lock is held by the caller, so we + * shouldn't be interrupted for more console activity. + */ +static void sbd_console_putchar(struct uart_port *uport, int ch) +{ + struct sbd_port *sport = to_sport(uport); + + sbd_transmit_drain(sport); + write_sbdchn(sport, R_DUART_TX_HOLD, ch); +} + +static void sbd_console_write(struct console *co, const char *s, + unsigned int count) +{ + int chip = co->index / DUART_MAX_SIDE; + int side = co->index % DUART_MAX_SIDE; + struct sbd_port *sport = &sbd_duarts[chip].sport[side]; + struct uart_port *uport = &sport->port; + unsigned long flags; + unsigned int mask; + + /* Disable transmit interrupts and enable the transmitter. */ + spin_lock_irqsave(&uport->lock, flags); + mask = read_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2)); + write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), + mask & ~M_DUART_IMR_TX); + write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_EN); + spin_unlock_irqrestore(&uport->lock, flags); + + uart_console_write(&sport->port, s, count, sbd_console_putchar); + + /* Restore transmit interrupts and the transmitter enable. */ + spin_lock_irqsave(&uport->lock, flags); + sbd_line_drain(sport); + if (sport->tx_stopped) + write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_DIS); + write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), mask); + spin_unlock_irqrestore(&uport->lock, flags); +} + +static int __init sbd_console_setup(struct console *co, char *options) +{ + int chip = co->index / DUART_MAX_SIDE; + int side = co->index % DUART_MAX_SIDE; + struct sbd_port *sport = &sbd_duarts[chip].sport[side]; + struct uart_port *uport = &sport->port; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + int ret; + + if (!sport->duart) + return -ENXIO; + + ret = sbd_map_port(uport); + if (ret) + return ret; + + sbd_init_port(sport); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + return uart_set_options(uport, co, baud, parity, bits, flow); +} + +static struct uart_driver sbd_reg; +static struct console sbd_console = { + .name = "duart", + .write = sbd_console_write, + .device = uart_console_device, + .setup = sbd_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &sbd_reg +}; + +static int __init sbd_serial_console_init(void) +{ + sbd_probe_duarts(); + register_console(&sbd_console); + + return 0; +} + +console_initcall(sbd_serial_console_init); + +#define SERIAL_SB1250_DUART_CONSOLE &sbd_console +#else +#define SERIAL_SB1250_DUART_CONSOLE NULL +#endif /* CONFIG_SERIAL_SB1250_DUART_CONSOLE */ + + +static struct uart_driver sbd_reg = { + .owner = THIS_MODULE, + .driver_name = "sb1250_duart", + .dev_name = "duart", + .major = TTY_MAJOR, + .minor = SB1250_DUART_MINOR_BASE, + .nr = DUART_MAX_CHIP * DUART_MAX_SIDE, + .cons = SERIAL_SB1250_DUART_CONSOLE, +}; + +/* Set up the driver and register it. */ +static int __init sbd_init(void) +{ + int i, ret; + + sbd_probe_duarts(); + + ret = uart_register_driver(&sbd_reg); + if (ret) + return ret; + + for (i = 0; i < DUART_MAX_CHIP * DUART_MAX_SIDE; i++) { + struct sbd_duart *duart = &sbd_duarts[i / DUART_MAX_SIDE]; + struct sbd_port *sport = &duart->sport[i % DUART_MAX_SIDE]; + struct uart_port *uport = &sport->port; + + if (sport->duart) + uart_add_one_port(&sbd_reg, uport); + } + + return 0; +} + +/* Unload the driver. Unregister stuff, get ready to go away. */ +static void __exit sbd_exit(void) +{ + int i; + + for (i = DUART_MAX_CHIP * DUART_MAX_SIDE - 1; i >= 0; i--) { + struct sbd_duart *duart = &sbd_duarts[i / DUART_MAX_SIDE]; + struct sbd_port *sport = &duart->sport[i % DUART_MAX_SIDE]; + struct uart_port *uport = &sport->port; + + if (sport->duart) + uart_remove_one_port(&sbd_reg, uport); + } + + uart_unregister_driver(&sbd_reg); +} + +module_init(sbd_init); +module_exit(sbd_exit); diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c new file mode 100644 index 000000000..fd9be81bc --- /dev/null +++ b/drivers/tty/serial/sc16is7xx.c @@ -0,0 +1,1612 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * SC16IS7xx tty serial driver - Copyright (C) 2014 GridPoint + * Author: Jon Ringle + * + * Based on max310x.c, by Alexander Shiyan + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define SC16IS7XX_NAME "sc16is7xx" +#define SC16IS7XX_MAX_DEVS 8 + +/* SC16IS7XX register definitions */ +#define SC16IS7XX_RHR_REG (0x00) /* RX FIFO */ +#define SC16IS7XX_THR_REG (0x00) /* TX FIFO */ +#define SC16IS7XX_IER_REG (0x01) /* Interrupt enable */ +#define SC16IS7XX_IIR_REG (0x02) /* Interrupt Identification */ +#define SC16IS7XX_FCR_REG (0x02) /* FIFO control */ +#define SC16IS7XX_LCR_REG (0x03) /* Line Control */ +#define SC16IS7XX_MCR_REG (0x04) /* Modem Control */ +#define SC16IS7XX_LSR_REG (0x05) /* Line Status */ +#define SC16IS7XX_MSR_REG (0x06) /* Modem Status */ +#define SC16IS7XX_SPR_REG (0x07) /* Scratch Pad */ +#define SC16IS7XX_TXLVL_REG (0x08) /* TX FIFO level */ +#define SC16IS7XX_RXLVL_REG (0x09) /* RX FIFO level */ +#define SC16IS7XX_IODIR_REG (0x0a) /* I/O Direction + * - only on 75x/76x + */ +#define SC16IS7XX_IOSTATE_REG (0x0b) /* I/O State + * - only on 75x/76x + */ +#define SC16IS7XX_IOINTENA_REG (0x0c) /* I/O Interrupt Enable + * - only on 75x/76x + */ +#define SC16IS7XX_IOCONTROL_REG (0x0e) /* I/O Control + * - only on 75x/76x + */ +#define SC16IS7XX_EFCR_REG (0x0f) /* Extra Features Control */ + +/* TCR/TLR Register set: Only if ((MCR[2] == 1) && (EFR[4] == 1)) */ +#define SC16IS7XX_TCR_REG (0x06) /* Transmit control */ +#define SC16IS7XX_TLR_REG (0x07) /* Trigger level */ + +/* Special Register set: Only if ((LCR[7] == 1) && (LCR != 0xBF)) */ +#define SC16IS7XX_DLL_REG (0x00) /* Divisor Latch Low */ +#define SC16IS7XX_DLH_REG (0x01) /* Divisor Latch High */ + +/* Enhanced Register set: Only if (LCR == 0xBF) */ +#define SC16IS7XX_EFR_REG (0x02) /* Enhanced Features */ +#define SC16IS7XX_XON1_REG (0x04) /* Xon1 word */ +#define SC16IS7XX_XON2_REG (0x05) /* Xon2 word */ +#define SC16IS7XX_XOFF1_REG (0x06) /* Xoff1 word */ +#define SC16IS7XX_XOFF2_REG (0x07) /* Xoff2 word */ + +/* IER register bits */ +#define SC16IS7XX_IER_RDI_BIT (1 << 0) /* Enable RX data interrupt */ +#define SC16IS7XX_IER_THRI_BIT (1 << 1) /* Enable TX holding register + * interrupt */ +#define SC16IS7XX_IER_RLSI_BIT (1 << 2) /* Enable RX line status + * interrupt */ +#define SC16IS7XX_IER_MSI_BIT (1 << 3) /* Enable Modem status + * interrupt */ + +/* IER register bits - write only if (EFR[4] == 1) */ +#define SC16IS7XX_IER_SLEEP_BIT (1 << 4) /* Enable Sleep mode */ +#define SC16IS7XX_IER_XOFFI_BIT (1 << 5) /* Enable Xoff interrupt */ +#define SC16IS7XX_IER_RTSI_BIT (1 << 6) /* Enable nRTS interrupt */ +#define SC16IS7XX_IER_CTSI_BIT (1 << 7) /* Enable nCTS interrupt */ + +/* FCR register bits */ +#define SC16IS7XX_FCR_FIFO_BIT (1 << 0) /* Enable FIFO */ +#define SC16IS7XX_FCR_RXRESET_BIT (1 << 1) /* Reset RX FIFO */ +#define SC16IS7XX_FCR_TXRESET_BIT (1 << 2) /* Reset TX FIFO */ +#define SC16IS7XX_FCR_RXLVLL_BIT (1 << 6) /* RX Trigger level LSB */ +#define SC16IS7XX_FCR_RXLVLH_BIT (1 << 7) /* RX Trigger level MSB */ + +/* FCR register bits - write only if (EFR[4] == 1) */ +#define SC16IS7XX_FCR_TXLVLL_BIT (1 << 4) /* TX Trigger level LSB */ +#define SC16IS7XX_FCR_TXLVLH_BIT (1 << 5) /* TX Trigger level MSB */ + +/* IIR register bits */ +#define SC16IS7XX_IIR_NO_INT_BIT (1 << 0) /* No interrupts pending */ +#define SC16IS7XX_IIR_ID_MASK 0x3e /* Mask for the interrupt ID */ +#define SC16IS7XX_IIR_THRI_SRC 0x02 /* TX holding register empty */ +#define SC16IS7XX_IIR_RDI_SRC 0x04 /* RX data interrupt */ +#define SC16IS7XX_IIR_RLSE_SRC 0x06 /* RX line status error */ +#define SC16IS7XX_IIR_RTOI_SRC 0x0c /* RX time-out interrupt */ +#define SC16IS7XX_IIR_MSI_SRC 0x00 /* Modem status interrupt + * - only on 75x/76x + */ +#define SC16IS7XX_IIR_INPIN_SRC 0x30 /* Input pin change of state + * - only on 75x/76x + */ +#define SC16IS7XX_IIR_XOFFI_SRC 0x10 /* Received Xoff */ +#define SC16IS7XX_IIR_CTSRTS_SRC 0x20 /* nCTS,nRTS change of state + * from active (LOW) + * to inactive (HIGH) + */ +/* LCR register bits */ +#define SC16IS7XX_LCR_LENGTH0_BIT (1 << 0) /* Word length bit 0 */ +#define SC16IS7XX_LCR_LENGTH1_BIT (1 << 1) /* Word length bit 1 + * + * Word length bits table: + * 00 -> 5 bit words + * 01 -> 6 bit words + * 10 -> 7 bit words + * 11 -> 8 bit words + */ +#define SC16IS7XX_LCR_STOPLEN_BIT (1 << 2) /* STOP length bit + * + * STOP length bit table: + * 0 -> 1 stop bit + * 1 -> 1-1.5 stop bits if + * word length is 5, + * 2 stop bits otherwise + */ +#define SC16IS7XX_LCR_PARITY_BIT (1 << 3) /* Parity bit enable */ +#define SC16IS7XX_LCR_EVENPARITY_BIT (1 << 4) /* Even parity bit enable */ +#define SC16IS7XX_LCR_FORCEPARITY_BIT (1 << 5) /* 9-bit multidrop parity */ +#define SC16IS7XX_LCR_TXBREAK_BIT (1 << 6) /* TX break enable */ +#define SC16IS7XX_LCR_DLAB_BIT (1 << 7) /* Divisor Latch enable */ +#define SC16IS7XX_LCR_WORD_LEN_5 (0x00) +#define SC16IS7XX_LCR_WORD_LEN_6 (0x01) +#define SC16IS7XX_LCR_WORD_LEN_7 (0x02) +#define SC16IS7XX_LCR_WORD_LEN_8 (0x03) +#define SC16IS7XX_LCR_CONF_MODE_A SC16IS7XX_LCR_DLAB_BIT /* Special + * reg set */ +#define SC16IS7XX_LCR_CONF_MODE_B 0xBF /* Enhanced + * reg set */ + +/* MCR register bits */ +#define SC16IS7XX_MCR_DTR_BIT (1 << 0) /* DTR complement + * - only on 75x/76x + */ +#define SC16IS7XX_MCR_RTS_BIT (1 << 1) /* RTS complement */ +#define SC16IS7XX_MCR_TCRTLR_BIT (1 << 2) /* TCR/TLR register enable */ +#define SC16IS7XX_MCR_LOOP_BIT (1 << 4) /* Enable loopback test mode */ +#define SC16IS7XX_MCR_XONANY_BIT (1 << 5) /* Enable Xon Any + * - write enabled + * if (EFR[4] == 1) + */ +#define SC16IS7XX_MCR_IRDA_BIT (1 << 6) /* Enable IrDA mode + * - write enabled + * if (EFR[4] == 1) + */ +#define SC16IS7XX_MCR_CLKSEL_BIT (1 << 7) /* Divide clock by 4 + * - write enabled + * if (EFR[4] == 1) + */ + +/* LSR register bits */ +#define SC16IS7XX_LSR_DR_BIT (1 << 0) /* Receiver data ready */ +#define SC16IS7XX_LSR_OE_BIT (1 << 1) /* Overrun Error */ +#define SC16IS7XX_LSR_PE_BIT (1 << 2) /* Parity Error */ +#define SC16IS7XX_LSR_FE_BIT (1 << 3) /* Frame Error */ +#define SC16IS7XX_LSR_BI_BIT (1 << 4) /* Break Interrupt */ +#define SC16IS7XX_LSR_BRK_ERROR_MASK 0x1E /* BI, FE, PE, OE bits */ +#define SC16IS7XX_LSR_THRE_BIT (1 << 5) /* TX holding register empty */ +#define SC16IS7XX_LSR_TEMT_BIT (1 << 6) /* Transmitter empty */ +#define SC16IS7XX_LSR_FIFOE_BIT (1 << 7) /* Fifo Error */ + +/* MSR register bits */ +#define SC16IS7XX_MSR_DCTS_BIT (1 << 0) /* Delta CTS Clear To Send */ +#define SC16IS7XX_MSR_DDSR_BIT (1 << 1) /* Delta DSR Data Set Ready + * or (IO4) + * - only on 75x/76x + */ +#define SC16IS7XX_MSR_DRI_BIT (1 << 2) /* Delta RI Ring Indicator + * or (IO7) + * - only on 75x/76x + */ +#define SC16IS7XX_MSR_DCD_BIT (1 << 3) /* Delta CD Carrier Detect + * or (IO6) + * - only on 75x/76x + */ +#define SC16IS7XX_MSR_CTS_BIT (1 << 4) /* CTS */ +#define SC16IS7XX_MSR_DSR_BIT (1 << 5) /* DSR (IO4) + * - only on 75x/76x + */ +#define SC16IS7XX_MSR_RI_BIT (1 << 6) /* RI (IO7) + * - only on 75x/76x + */ +#define SC16IS7XX_MSR_CD_BIT (1 << 7) /* CD (IO6) + * - only on 75x/76x + */ +#define SC16IS7XX_MSR_DELTA_MASK 0x0F /* Any of the delta bits! */ + +/* + * TCR register bits + * TCR trigger levels are available from 0 to 60 characters with a granularity + * of four. + * The programmer must program the TCR such that TCR[3:0] > TCR[7:4]. There is + * no built-in hardware check to make sure this condition is met. Also, the TCR + * must be programmed with this condition before auto RTS or software flow + * control is enabled to avoid spurious operation of the device. + */ +#define SC16IS7XX_TCR_RX_HALT(words) ((((words) / 4) & 0x0f) << 0) +#define SC16IS7XX_TCR_RX_RESUME(words) ((((words) / 4) & 0x0f) << 4) + +/* + * TLR register bits + * If TLR[3:0] or TLR[7:4] are logical 0, the selectable trigger levels via the + * FIFO Control Register (FCR) are used for the transmit and receive FIFO + * trigger levels. Trigger levels from 4 characters to 60 characters are + * available with a granularity of four. + * + * When the trigger level setting in TLR is zero, the SC16IS740/750/760 uses the + * trigger level setting defined in FCR. If TLR has non-zero trigger level value + * the trigger level defined in FCR is discarded. This applies to both transmit + * FIFO and receive FIFO trigger level setting. + * + * When TLR is used for RX trigger level control, FCR[7:6] should be left at the + * default state, that is, '00'. + */ +#define SC16IS7XX_TLR_TX_TRIGGER(words) ((((words) / 4) & 0x0f) << 0) +#define SC16IS7XX_TLR_RX_TRIGGER(words) ((((words) / 4) & 0x0f) << 4) + +/* IOControl register bits (Only 750/760) */ +#define SC16IS7XX_IOCONTROL_LATCH_BIT (1 << 0) /* Enable input latching */ +#define SC16IS7XX_IOCONTROL_MODEM_BIT (1 << 1) /* Enable GPIO[7:4] as modem pins */ +#define SC16IS7XX_IOCONTROL_SRESET_BIT (1 << 3) /* Software Reset */ + +/* EFCR register bits */ +#define SC16IS7XX_EFCR_9BIT_MODE_BIT (1 << 0) /* Enable 9-bit or Multidrop + * mode (RS485) */ +#define SC16IS7XX_EFCR_RXDISABLE_BIT (1 << 1) /* Disable receiver */ +#define SC16IS7XX_EFCR_TXDISABLE_BIT (1 << 2) /* Disable transmitter */ +#define SC16IS7XX_EFCR_AUTO_RS485_BIT (1 << 4) /* Auto RS485 RTS direction */ +#define SC16IS7XX_EFCR_RTS_INVERT_BIT (1 << 5) /* RTS output inversion */ +#define SC16IS7XX_EFCR_IRDA_MODE_BIT (1 << 7) /* IrDA mode + * 0 = rate upto 115.2 kbit/s + * - Only 750/760 + * 1 = rate upto 1.152 Mbit/s + * - Only 760 + */ + +/* EFR register bits */ +#define SC16IS7XX_EFR_AUTORTS_BIT (1 << 6) /* Auto RTS flow ctrl enable */ +#define SC16IS7XX_EFR_AUTOCTS_BIT (1 << 7) /* Auto CTS flow ctrl enable */ +#define SC16IS7XX_EFR_XOFF2_DETECT_BIT (1 << 5) /* Enable Xoff2 detection */ +#define SC16IS7XX_EFR_ENABLE_BIT (1 << 4) /* Enable enhanced functions + * and writing to IER[7:4], + * FCR[5:4], MCR[7:5] + */ +#define SC16IS7XX_EFR_SWFLOW3_BIT (1 << 3) /* SWFLOW bit 3 */ +#define SC16IS7XX_EFR_SWFLOW2_BIT (1 << 2) /* SWFLOW bit 2 + * + * SWFLOW bits 3 & 2 table: + * 00 -> no transmitter flow + * control + * 01 -> transmitter generates + * XON2 and XOFF2 + * 10 -> transmitter generates + * XON1 and XOFF1 + * 11 -> transmitter generates + * XON1, XON2, XOFF1 and + * XOFF2 + */ +#define SC16IS7XX_EFR_SWFLOW1_BIT (1 << 1) /* SWFLOW bit 2 */ +#define SC16IS7XX_EFR_SWFLOW0_BIT (1 << 0) /* SWFLOW bit 3 + * + * SWFLOW bits 3 & 2 table: + * 00 -> no received flow + * control + * 01 -> receiver compares + * XON2 and XOFF2 + * 10 -> receiver compares + * XON1 and XOFF1 + * 11 -> receiver compares + * XON1, XON2, XOFF1 and + * XOFF2 + */ + +/* Misc definitions */ +#define SC16IS7XX_FIFO_SIZE (64) +#define SC16IS7XX_REG_SHIFT 2 + +struct sc16is7xx_devtype { + char name[10]; + int nr_gpio; + int nr_uart; +}; + +#define SC16IS7XX_RECONF_MD (1 << 0) +#define SC16IS7XX_RECONF_IER (1 << 1) +#define SC16IS7XX_RECONF_RS485 (1 << 2) + +struct sc16is7xx_one_config { + unsigned int flags; + u8 ier_clear; +}; + +struct sc16is7xx_one { + struct uart_port port; + u8 line; + struct kthread_work tx_work; + struct kthread_work reg_work; + struct sc16is7xx_one_config config; + bool irda_mode; +}; + +struct sc16is7xx_port { + const struct sc16is7xx_devtype *devtype; + struct regmap *regmap; + struct clk *clk; +#ifdef CONFIG_GPIOLIB + struct gpio_chip gpio; +#endif + unsigned char buf[SC16IS7XX_FIFO_SIZE]; + struct kthread_worker kworker; + struct task_struct *kworker_task; + struct mutex efr_lock; + struct sc16is7xx_one p[]; +}; + +static unsigned long sc16is7xx_lines; + +static struct uart_driver sc16is7xx_uart = { + .owner = THIS_MODULE, + .dev_name = "ttySC", + .nr = SC16IS7XX_MAX_DEVS, +}; + +#define to_sc16is7xx_port(p,e) ((container_of((p), struct sc16is7xx_port, e))) +#define to_sc16is7xx_one(p,e) ((container_of((p), struct sc16is7xx_one, e))) + +static int sc16is7xx_line(struct uart_port *port) +{ + struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); + + return one->line; +} + +static u8 sc16is7xx_port_read(struct uart_port *port, u8 reg) +{ + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + unsigned int val = 0; + const u8 line = sc16is7xx_line(port); + + regmap_read(s->regmap, (reg << SC16IS7XX_REG_SHIFT) | line, &val); + + return val; +} + +static void sc16is7xx_port_write(struct uart_port *port, u8 reg, u8 val) +{ + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + const u8 line = sc16is7xx_line(port); + + regmap_write(s->regmap, (reg << SC16IS7XX_REG_SHIFT) | line, val); +} + +static void sc16is7xx_fifo_read(struct uart_port *port, unsigned int rxlen) +{ + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + const u8 line = sc16is7xx_line(port); + u8 addr = (SC16IS7XX_RHR_REG << SC16IS7XX_REG_SHIFT) | line; + + regcache_cache_bypass(s->regmap, true); + regmap_raw_read(s->regmap, addr, s->buf, rxlen); + regcache_cache_bypass(s->regmap, false); +} + +static void sc16is7xx_fifo_write(struct uart_port *port, u8 to_send) +{ + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + const u8 line = sc16is7xx_line(port); + u8 addr = (SC16IS7XX_THR_REG << SC16IS7XX_REG_SHIFT) | line; + + /* + * Don't send zero-length data, at least on SPI it confuses the chip + * delivering wrong TXLVL data. + */ + if (unlikely(!to_send)) + return; + + regcache_cache_bypass(s->regmap, true); + regmap_raw_write(s->regmap, addr, s->buf, to_send); + regcache_cache_bypass(s->regmap, false); +} + +static void sc16is7xx_port_update(struct uart_port *port, u8 reg, + u8 mask, u8 val) +{ + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + const u8 line = sc16is7xx_line(port); + + regmap_update_bits(s->regmap, (reg << SC16IS7XX_REG_SHIFT) | line, + mask, val); +} + +static int sc16is7xx_alloc_line(void) +{ + int i; + + BUILD_BUG_ON(SC16IS7XX_MAX_DEVS > BITS_PER_LONG); + + for (i = 0; i < SC16IS7XX_MAX_DEVS; i++) + if (!test_and_set_bit(i, &sc16is7xx_lines)) + break; + + return i; +} + +static void sc16is7xx_power(struct uart_port *port, int on) +{ + sc16is7xx_port_update(port, SC16IS7XX_IER_REG, + SC16IS7XX_IER_SLEEP_BIT, + on ? 0 : SC16IS7XX_IER_SLEEP_BIT); +} + +static const struct sc16is7xx_devtype sc16is74x_devtype = { + .name = "SC16IS74X", + .nr_gpio = 0, + .nr_uart = 1, +}; + +static const struct sc16is7xx_devtype sc16is750_devtype = { + .name = "SC16IS750", + .nr_gpio = 8, + .nr_uart = 1, +}; + +static const struct sc16is7xx_devtype sc16is752_devtype = { + .name = "SC16IS752", + .nr_gpio = 8, + .nr_uart = 2, +}; + +static const struct sc16is7xx_devtype sc16is760_devtype = { + .name = "SC16IS760", + .nr_gpio = 8, + .nr_uart = 1, +}; + +static const struct sc16is7xx_devtype sc16is762_devtype = { + .name = "SC16IS762", + .nr_gpio = 8, + .nr_uart = 2, +}; + +static bool sc16is7xx_regmap_volatile(struct device *dev, unsigned int reg) +{ + switch (reg >> SC16IS7XX_REG_SHIFT) { + case SC16IS7XX_RHR_REG: + case SC16IS7XX_IIR_REG: + case SC16IS7XX_LSR_REG: + case SC16IS7XX_MSR_REG: + case SC16IS7XX_TXLVL_REG: + case SC16IS7XX_RXLVL_REG: + case SC16IS7XX_IOSTATE_REG: + return true; + default: + break; + } + + return false; +} + +static bool sc16is7xx_regmap_precious(struct device *dev, unsigned int reg) +{ + switch (reg >> SC16IS7XX_REG_SHIFT) { + case SC16IS7XX_RHR_REG: + return true; + default: + break; + } + + return false; +} + +static int sc16is7xx_set_baud(struct uart_port *port, int baud) +{ + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + u8 lcr; + u8 prescaler = 0; + unsigned long clk = port->uartclk, div = clk / 16 / baud; + + if (div > 0xffff) { + prescaler = SC16IS7XX_MCR_CLKSEL_BIT; + div /= 4; + } + + /* In an amazing feat of design, the Enhanced Features Register shares + * the address of the Interrupt Identification Register, and is + * switched in by writing a magic value (0xbf) to the Line Control + * Register. Any interrupt firing during this time will see the EFR + * where it expects the IIR to be, leading to "Unexpected interrupt" + * messages. + * + * Prevent this possibility by claiming a mutex while accessing the + * EFR, and claiming the same mutex from within the interrupt handler. + * This is similar to disabling the interrupt, but that doesn't work + * because the bulk of the interrupt processing is run as a workqueue + * job in thread context. + */ + mutex_lock(&s->efr_lock); + + lcr = sc16is7xx_port_read(port, SC16IS7XX_LCR_REG); + + /* Open the LCR divisors for configuration */ + sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, + SC16IS7XX_LCR_CONF_MODE_B); + + /* Enable enhanced features */ + regcache_cache_bypass(s->regmap, true); + sc16is7xx_port_write(port, SC16IS7XX_EFR_REG, + SC16IS7XX_EFR_ENABLE_BIT); + regcache_cache_bypass(s->regmap, false); + + /* Put LCR back to the normal mode */ + sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr); + + mutex_unlock(&s->efr_lock); + + sc16is7xx_port_update(port, SC16IS7XX_MCR_REG, + SC16IS7XX_MCR_CLKSEL_BIT, + prescaler); + + /* Open the LCR divisors for configuration */ + sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, + SC16IS7XX_LCR_CONF_MODE_A); + + /* Write the new divisor */ + regcache_cache_bypass(s->regmap, true); + sc16is7xx_port_write(port, SC16IS7XX_DLH_REG, div / 256); + sc16is7xx_port_write(port, SC16IS7XX_DLL_REG, div % 256); + regcache_cache_bypass(s->regmap, false); + + /* Put LCR back to the normal mode */ + sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr); + + return DIV_ROUND_CLOSEST(clk / 16, div); +} + +static void sc16is7xx_handle_rx(struct uart_port *port, unsigned int rxlen, + unsigned int iir) +{ + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + unsigned int lsr = 0, ch, flag, bytes_read, i; + bool read_lsr = (iir == SC16IS7XX_IIR_RLSE_SRC) ? true : false; + + if (unlikely(rxlen >= sizeof(s->buf))) { + dev_warn_ratelimited(port->dev, + "ttySC%i: Possible RX FIFO overrun: %d\n", + port->line, rxlen); + port->icount.buf_overrun++; + /* Ensure sanity of RX level */ + rxlen = sizeof(s->buf); + } + + while (rxlen) { + /* Only read lsr if there are possible errors in FIFO */ + if (read_lsr) { + lsr = sc16is7xx_port_read(port, SC16IS7XX_LSR_REG); + if (!(lsr & SC16IS7XX_LSR_FIFOE_BIT)) + read_lsr = false; /* No errors left in FIFO */ + } else + lsr = 0; + + if (read_lsr) { + s->buf[0] = sc16is7xx_port_read(port, SC16IS7XX_RHR_REG); + bytes_read = 1; + } else { + sc16is7xx_fifo_read(port, rxlen); + bytes_read = rxlen; + } + + lsr &= SC16IS7XX_LSR_BRK_ERROR_MASK; + + port->icount.rx++; + flag = TTY_NORMAL; + + if (unlikely(lsr)) { + if (lsr & SC16IS7XX_LSR_BI_BIT) { + port->icount.brk++; + if (uart_handle_break(port)) + continue; + } else if (lsr & SC16IS7XX_LSR_PE_BIT) + port->icount.parity++; + else if (lsr & SC16IS7XX_LSR_FE_BIT) + port->icount.frame++; + else if (lsr & SC16IS7XX_LSR_OE_BIT) + port->icount.overrun++; + + lsr &= port->read_status_mask; + if (lsr & SC16IS7XX_LSR_BI_BIT) + flag = TTY_BREAK; + else if (lsr & SC16IS7XX_LSR_PE_BIT) + flag = TTY_PARITY; + else if (lsr & SC16IS7XX_LSR_FE_BIT) + flag = TTY_FRAME; + else if (lsr & SC16IS7XX_LSR_OE_BIT) + flag = TTY_OVERRUN; + } + + for (i = 0; i < bytes_read; ++i) { + ch = s->buf[i]; + if (uart_handle_sysrq_char(port, ch)) + continue; + + if (lsr & port->ignore_status_mask) + continue; + + uart_insert_char(port, lsr, SC16IS7XX_LSR_OE_BIT, ch, + flag); + } + rxlen -= bytes_read; + } + + tty_flip_buffer_push(&port->state->port); +} + +static void sc16is7xx_handle_tx(struct uart_port *port) +{ + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + struct circ_buf *xmit = &port->state->xmit; + unsigned int txlen, to_send, i; + + if (unlikely(port->x_char)) { + sc16is7xx_port_write(port, SC16IS7XX_THR_REG, port->x_char); + port->icount.tx++; + port->x_char = 0; + return; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) + return; + + /* Get length of data pending in circular buffer */ + to_send = uart_circ_chars_pending(xmit); + if (likely(to_send)) { + /* Limit to size of TX FIFO */ + txlen = sc16is7xx_port_read(port, SC16IS7XX_TXLVL_REG); + if (txlen > SC16IS7XX_FIFO_SIZE) { + dev_err_ratelimited(port->dev, + "chip reports %d free bytes in TX fifo, but it only has %d", + txlen, SC16IS7XX_FIFO_SIZE); + txlen = 0; + } + to_send = (to_send > txlen) ? txlen : to_send; + + /* Add data to send */ + port->icount.tx += to_send; + + /* Convert to linear buffer */ + for (i = 0; i < to_send; ++i) { + s->buf[i] = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + } + + sc16is7xx_fifo_write(port, to_send); + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); +} + +static bool sc16is7xx_port_irq(struct sc16is7xx_port *s, int portno) +{ + struct uart_port *port = &s->p[portno].port; + + do { + unsigned int iir, rxlen; + + iir = sc16is7xx_port_read(port, SC16IS7XX_IIR_REG); + if (iir & SC16IS7XX_IIR_NO_INT_BIT) + return false; + + iir &= SC16IS7XX_IIR_ID_MASK; + + switch (iir) { + case SC16IS7XX_IIR_RDI_SRC: + case SC16IS7XX_IIR_RLSE_SRC: + case SC16IS7XX_IIR_RTOI_SRC: + case SC16IS7XX_IIR_XOFFI_SRC: + rxlen = sc16is7xx_port_read(port, SC16IS7XX_RXLVL_REG); + + /* + * There is a silicon bug that makes the chip report a + * time-out interrupt but no data in the FIFO. This is + * described in errata section 18.1.4. + * + * When this happens, read one byte from the FIFO to + * clear the interrupt. + */ + if (iir == SC16IS7XX_IIR_RTOI_SRC && !rxlen) + rxlen = 1; + + if (rxlen) + sc16is7xx_handle_rx(port, rxlen, iir); + break; + case SC16IS7XX_IIR_THRI_SRC: + sc16is7xx_handle_tx(port); + break; + default: + dev_err_ratelimited(port->dev, + "ttySC%i: Unexpected interrupt: %x", + port->line, iir); + break; + } + } while (0); + return true; +} + +static irqreturn_t sc16is7xx_irq(int irq, void *dev_id) +{ + struct sc16is7xx_port *s = (struct sc16is7xx_port *)dev_id; + + mutex_lock(&s->efr_lock); + + while (1) { + bool keep_polling = false; + int i; + + for (i = 0; i < s->devtype->nr_uart; ++i) + keep_polling |= sc16is7xx_port_irq(s, i); + if (!keep_polling) + break; + } + + mutex_unlock(&s->efr_lock); + + return IRQ_HANDLED; +} + +static void sc16is7xx_tx_proc(struct kthread_work *ws) +{ + struct uart_port *port = &(to_sc16is7xx_one(ws, tx_work)->port); + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + + if ((port->rs485.flags & SER_RS485_ENABLED) && + (port->rs485.delay_rts_before_send > 0)) + msleep(port->rs485.delay_rts_before_send); + + mutex_lock(&s->efr_lock); + sc16is7xx_handle_tx(port); + mutex_unlock(&s->efr_lock); +} + +static void sc16is7xx_reconf_rs485(struct uart_port *port) +{ + const u32 mask = SC16IS7XX_EFCR_AUTO_RS485_BIT | + SC16IS7XX_EFCR_RTS_INVERT_BIT; + u32 efcr = 0; + struct serial_rs485 *rs485 = &port->rs485; + unsigned long irqflags; + + spin_lock_irqsave(&port->lock, irqflags); + if (rs485->flags & SER_RS485_ENABLED) { + efcr |= SC16IS7XX_EFCR_AUTO_RS485_BIT; + + if (rs485->flags & SER_RS485_RTS_AFTER_SEND) + efcr |= SC16IS7XX_EFCR_RTS_INVERT_BIT; + } + spin_unlock_irqrestore(&port->lock, irqflags); + + sc16is7xx_port_update(port, SC16IS7XX_EFCR_REG, mask, efcr); +} + +static void sc16is7xx_reg_proc(struct kthread_work *ws) +{ + struct sc16is7xx_one *one = to_sc16is7xx_one(ws, reg_work); + struct sc16is7xx_one_config config; + unsigned long irqflags; + + spin_lock_irqsave(&one->port.lock, irqflags); + config = one->config; + memset(&one->config, 0, sizeof(one->config)); + spin_unlock_irqrestore(&one->port.lock, irqflags); + + if (config.flags & SC16IS7XX_RECONF_MD) { + sc16is7xx_port_update(&one->port, SC16IS7XX_MCR_REG, + SC16IS7XX_MCR_LOOP_BIT, + (one->port.mctrl & TIOCM_LOOP) ? + SC16IS7XX_MCR_LOOP_BIT : 0); + sc16is7xx_port_update(&one->port, SC16IS7XX_MCR_REG, + SC16IS7XX_MCR_RTS_BIT, + (one->port.mctrl & TIOCM_RTS) ? + SC16IS7XX_MCR_RTS_BIT : 0); + sc16is7xx_port_update(&one->port, SC16IS7XX_MCR_REG, + SC16IS7XX_MCR_DTR_BIT, + (one->port.mctrl & TIOCM_DTR) ? + SC16IS7XX_MCR_DTR_BIT : 0); + } + if (config.flags & SC16IS7XX_RECONF_IER) + sc16is7xx_port_update(&one->port, SC16IS7XX_IER_REG, + config.ier_clear, 0); + + if (config.flags & SC16IS7XX_RECONF_RS485) + sc16is7xx_reconf_rs485(&one->port); +} + +static void sc16is7xx_ier_clear(struct uart_port *port, u8 bit) +{ + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); + + one->config.flags |= SC16IS7XX_RECONF_IER; + one->config.ier_clear |= bit; + kthread_queue_work(&s->kworker, &one->reg_work); +} + +static void sc16is7xx_stop_tx(struct uart_port *port) +{ + sc16is7xx_ier_clear(port, SC16IS7XX_IER_THRI_BIT); +} + +static void sc16is7xx_stop_rx(struct uart_port *port) +{ + sc16is7xx_ier_clear(port, SC16IS7XX_IER_RDI_BIT); +} + +static void sc16is7xx_start_tx(struct uart_port *port) +{ + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); + + kthread_queue_work(&s->kworker, &one->tx_work); +} + +static unsigned int sc16is7xx_tx_empty(struct uart_port *port) +{ + unsigned int lsr; + + lsr = sc16is7xx_port_read(port, SC16IS7XX_LSR_REG); + + return (lsr & SC16IS7XX_LSR_TEMT_BIT) ? TIOCSER_TEMT : 0; +} + +static unsigned int sc16is7xx_get_mctrl(struct uart_port *port) +{ + /* DCD and DSR are not wired and CTS/RTS is handled automatically + * so just indicate DSR and CAR asserted + */ + return TIOCM_DSR | TIOCM_CAR; +} + +static void sc16is7xx_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); + + one->config.flags |= SC16IS7XX_RECONF_MD; + kthread_queue_work(&s->kworker, &one->reg_work); +} + +static void sc16is7xx_break_ctl(struct uart_port *port, int break_state) +{ + sc16is7xx_port_update(port, SC16IS7XX_LCR_REG, + SC16IS7XX_LCR_TXBREAK_BIT, + break_state ? SC16IS7XX_LCR_TXBREAK_BIT : 0); +} + +static void sc16is7xx_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + unsigned int lcr, flow = 0; + int baud; + + /* Mask termios capabilities we don't support */ + termios->c_cflag &= ~CMSPAR; + + /* Word size */ + switch (termios->c_cflag & CSIZE) { + case CS5: + lcr = SC16IS7XX_LCR_WORD_LEN_5; + break; + case CS6: + lcr = SC16IS7XX_LCR_WORD_LEN_6; + break; + case CS7: + lcr = SC16IS7XX_LCR_WORD_LEN_7; + break; + case CS8: + lcr = SC16IS7XX_LCR_WORD_LEN_8; + break; + default: + lcr = SC16IS7XX_LCR_WORD_LEN_8; + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= CS8; + break; + } + + /* Parity */ + if (termios->c_cflag & PARENB) { + lcr |= SC16IS7XX_LCR_PARITY_BIT; + if (!(termios->c_cflag & PARODD)) + lcr |= SC16IS7XX_LCR_EVENPARITY_BIT; + } + + /* Stop bits */ + if (termios->c_cflag & CSTOPB) + lcr |= SC16IS7XX_LCR_STOPLEN_BIT; /* 2 stops */ + + /* Set read status mask */ + port->read_status_mask = SC16IS7XX_LSR_OE_BIT; + if (termios->c_iflag & INPCK) + port->read_status_mask |= SC16IS7XX_LSR_PE_BIT | + SC16IS7XX_LSR_FE_BIT; + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= SC16IS7XX_LSR_BI_BIT; + + /* Set status ignore mask */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNBRK) + port->ignore_status_mask |= SC16IS7XX_LSR_BI_BIT; + if (!(termios->c_cflag & CREAD)) + port->ignore_status_mask |= SC16IS7XX_LSR_BRK_ERROR_MASK; + + /* As above, claim the mutex while accessing the EFR. */ + mutex_lock(&s->efr_lock); + + sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, + SC16IS7XX_LCR_CONF_MODE_B); + + /* Configure flow control */ + regcache_cache_bypass(s->regmap, true); + sc16is7xx_port_write(port, SC16IS7XX_XON1_REG, termios->c_cc[VSTART]); + sc16is7xx_port_write(port, SC16IS7XX_XOFF1_REG, termios->c_cc[VSTOP]); + if (termios->c_cflag & CRTSCTS) + flow |= SC16IS7XX_EFR_AUTOCTS_BIT | + SC16IS7XX_EFR_AUTORTS_BIT; + if (termios->c_iflag & IXON) + flow |= SC16IS7XX_EFR_SWFLOW3_BIT; + if (termios->c_iflag & IXOFF) + flow |= SC16IS7XX_EFR_SWFLOW1_BIT; + + sc16is7xx_port_write(port, SC16IS7XX_EFR_REG, flow); + regcache_cache_bypass(s->regmap, false); + + /* Update LCR register */ + sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr); + + mutex_unlock(&s->efr_lock); + + /* Get baud rate generator configuration */ + baud = uart_get_baud_rate(port, termios, old, + port->uartclk / 16 / 4 / 0xffff, + port->uartclk / 16); + + /* Setup baudrate generator */ + baud = sc16is7xx_set_baud(port, baud); + + /* Update timeout according to new baud rate */ + uart_update_timeout(port, termios->c_cflag, baud); +} + +static int sc16is7xx_config_rs485(struct uart_port *port, + struct serial_rs485 *rs485) +{ + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); + + if (rs485->flags & SER_RS485_ENABLED) { + bool rts_during_rx, rts_during_tx; + + rts_during_rx = rs485->flags & SER_RS485_RTS_AFTER_SEND; + rts_during_tx = rs485->flags & SER_RS485_RTS_ON_SEND; + + if (rts_during_rx == rts_during_tx) + dev_err(port->dev, + "unsupported RTS signalling on_send:%d after_send:%d - exactly one of RS485 RTS flags should be set\n", + rts_during_tx, rts_during_rx); + + /* + * RTS signal is handled by HW, it's timing can't be influenced. + * However, it's sometimes useful to delay TX even without RTS + * control therefore we try to handle .delay_rts_before_send. + */ + if (rs485->delay_rts_after_send) + return -EINVAL; + } + + port->rs485 = *rs485; + one->config.flags |= SC16IS7XX_RECONF_RS485; + kthread_queue_work(&s->kworker, &one->reg_work); + + return 0; +} + +static int sc16is7xx_startup(struct uart_port *port) +{ + struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + unsigned int val; + + sc16is7xx_power(port, 1); + + /* Reset FIFOs*/ + val = SC16IS7XX_FCR_RXRESET_BIT | SC16IS7XX_FCR_TXRESET_BIT; + sc16is7xx_port_write(port, SC16IS7XX_FCR_REG, val); + udelay(5); + sc16is7xx_port_write(port, SC16IS7XX_FCR_REG, + SC16IS7XX_FCR_FIFO_BIT); + + /* Enable EFR */ + sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, + SC16IS7XX_LCR_CONF_MODE_B); + + regcache_cache_bypass(s->regmap, true); + + /* Enable write access to enhanced features and internal clock div */ + sc16is7xx_port_write(port, SC16IS7XX_EFR_REG, + SC16IS7XX_EFR_ENABLE_BIT); + + /* Enable TCR/TLR */ + sc16is7xx_port_update(port, SC16IS7XX_MCR_REG, + SC16IS7XX_MCR_TCRTLR_BIT, + SC16IS7XX_MCR_TCRTLR_BIT); + + /* Configure flow control levels */ + /* Flow control halt level 48, resume level 24 */ + sc16is7xx_port_write(port, SC16IS7XX_TCR_REG, + SC16IS7XX_TCR_RX_RESUME(24) | + SC16IS7XX_TCR_RX_HALT(48)); + + regcache_cache_bypass(s->regmap, false); + + /* Now, initialize the UART */ + sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, SC16IS7XX_LCR_WORD_LEN_8); + + /* Enable IrDA mode if requested in DT */ + /* This bit must be written with LCR[7] = 0 */ + sc16is7xx_port_update(port, SC16IS7XX_MCR_REG, + SC16IS7XX_MCR_IRDA_BIT, + one->irda_mode ? + SC16IS7XX_MCR_IRDA_BIT : 0); + + /* Enable the Rx and Tx FIFO */ + sc16is7xx_port_update(port, SC16IS7XX_EFCR_REG, + SC16IS7XX_EFCR_RXDISABLE_BIT | + SC16IS7XX_EFCR_TXDISABLE_BIT, + 0); + + /* Enable RX, TX interrupts */ + val = SC16IS7XX_IER_RDI_BIT | SC16IS7XX_IER_THRI_BIT; + sc16is7xx_port_write(port, SC16IS7XX_IER_REG, val); + + return 0; +} + +static void sc16is7xx_shutdown(struct uart_port *port) +{ + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + + /* Disable all interrupts */ + sc16is7xx_port_write(port, SC16IS7XX_IER_REG, 0); + /* Disable TX/RX */ + sc16is7xx_port_update(port, SC16IS7XX_EFCR_REG, + SC16IS7XX_EFCR_RXDISABLE_BIT | + SC16IS7XX_EFCR_TXDISABLE_BIT, + SC16IS7XX_EFCR_RXDISABLE_BIT | + SC16IS7XX_EFCR_TXDISABLE_BIT); + + sc16is7xx_power(port, 0); + + kthread_flush_worker(&s->kworker); +} + +static const char *sc16is7xx_type(struct uart_port *port) +{ + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + + return (port->type == PORT_SC16IS7XX) ? s->devtype->name : NULL; +} + +static int sc16is7xx_request_port(struct uart_port *port) +{ + /* Do nothing */ + return 0; +} + +static void sc16is7xx_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) + port->type = PORT_SC16IS7XX; +} + +static int sc16is7xx_verify_port(struct uart_port *port, + struct serial_struct *s) +{ + if ((s->type != PORT_UNKNOWN) && (s->type != PORT_SC16IS7XX)) + return -EINVAL; + if (s->irq != port->irq) + return -EINVAL; + + return 0; +} + +static void sc16is7xx_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + sc16is7xx_power(port, (state == UART_PM_STATE_ON) ? 1 : 0); +} + +static void sc16is7xx_null_void(struct uart_port *port) +{ + /* Do nothing */ +} + +static const struct uart_ops sc16is7xx_ops = { + .tx_empty = sc16is7xx_tx_empty, + .set_mctrl = sc16is7xx_set_mctrl, + .get_mctrl = sc16is7xx_get_mctrl, + .stop_tx = sc16is7xx_stop_tx, + .start_tx = sc16is7xx_start_tx, + .stop_rx = sc16is7xx_stop_rx, + .break_ctl = sc16is7xx_break_ctl, + .startup = sc16is7xx_startup, + .shutdown = sc16is7xx_shutdown, + .set_termios = sc16is7xx_set_termios, + .type = sc16is7xx_type, + .request_port = sc16is7xx_request_port, + .release_port = sc16is7xx_null_void, + .config_port = sc16is7xx_config_port, + .verify_port = sc16is7xx_verify_port, + .pm = sc16is7xx_pm, +}; + +#ifdef CONFIG_GPIOLIB +static int sc16is7xx_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + unsigned int val; + struct sc16is7xx_port *s = gpiochip_get_data(chip); + struct uart_port *port = &s->p[0].port; + + val = sc16is7xx_port_read(port, SC16IS7XX_IOSTATE_REG); + + return !!(val & BIT(offset)); +} + +static void sc16is7xx_gpio_set(struct gpio_chip *chip, unsigned offset, int val) +{ + struct sc16is7xx_port *s = gpiochip_get_data(chip); + struct uart_port *port = &s->p[0].port; + + sc16is7xx_port_update(port, SC16IS7XX_IOSTATE_REG, BIT(offset), + val ? BIT(offset) : 0); +} + +static int sc16is7xx_gpio_direction_input(struct gpio_chip *chip, + unsigned offset) +{ + struct sc16is7xx_port *s = gpiochip_get_data(chip); + struct uart_port *port = &s->p[0].port; + + sc16is7xx_port_update(port, SC16IS7XX_IODIR_REG, BIT(offset), 0); + + return 0; +} + +static int sc16is7xx_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int val) +{ + struct sc16is7xx_port *s = gpiochip_get_data(chip); + struct uart_port *port = &s->p[0].port; + u8 state = sc16is7xx_port_read(port, SC16IS7XX_IOSTATE_REG); + + if (val) + state |= BIT(offset); + else + state &= ~BIT(offset); + + /* + * If we write IOSTATE first, and then IODIR, the output value is not + * transferred to the corresponding I/O pin. + * The datasheet states that each register bit will be transferred to + * the corresponding I/O pin programmed as output when writing to + * IOSTATE. Therefore, configure direction first with IODIR, and then + * set value after with IOSTATE. + */ + sc16is7xx_port_update(port, SC16IS7XX_IODIR_REG, BIT(offset), + BIT(offset)); + sc16is7xx_port_write(port, SC16IS7XX_IOSTATE_REG, state); + + return 0; +} +#endif + +static int sc16is7xx_probe(struct device *dev, + const struct sc16is7xx_devtype *devtype, + struct regmap *regmap, int irq) +{ + unsigned long freq = 0, *pfreq = dev_get_platdata(dev); + unsigned int val; + u32 uartclk = 0; + int i, ret; + struct sc16is7xx_port *s; + + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + /* + * This device does not have an identification register that would + * tell us if we are really connected to the correct device. + * The best we can do is to check if communication is at all possible. + */ + ret = regmap_read(regmap, + SC16IS7XX_LSR_REG << SC16IS7XX_REG_SHIFT, &val); + if (ret < 0) + return -EPROBE_DEFER; + + /* Alloc port structure */ + s = devm_kzalloc(dev, struct_size(s, p, devtype->nr_uart), GFP_KERNEL); + if (!s) { + dev_err(dev, "Error allocating port structure\n"); + return -ENOMEM; + } + + /* Always ask for fixed clock rate from a property. */ + device_property_read_u32(dev, "clock-frequency", &uartclk); + + s->clk = devm_clk_get(dev, NULL); + if (IS_ERR(s->clk)) { + if (uartclk) + freq = uartclk; + if (pfreq) + freq = *pfreq; + if (freq) + dev_dbg(dev, "Clock frequency: %luHz\n", freq); + else + return PTR_ERR(s->clk); + } else { + ret = clk_prepare_enable(s->clk); + if (ret) + return ret; + + freq = clk_get_rate(s->clk); + } + + s->regmap = regmap; + s->devtype = devtype; + dev_set_drvdata(dev, s); + mutex_init(&s->efr_lock); + + kthread_init_worker(&s->kworker); + s->kworker_task = kthread_run(kthread_worker_fn, &s->kworker, + "sc16is7xx"); + if (IS_ERR(s->kworker_task)) { + ret = PTR_ERR(s->kworker_task); + goto out_clk; + } + sched_set_fifo(s->kworker_task); + + /* reset device, purging any pending irq / data */ + regmap_write(s->regmap, SC16IS7XX_IOCONTROL_REG << SC16IS7XX_REG_SHIFT, + SC16IS7XX_IOCONTROL_SRESET_BIT); + + for (i = 0; i < devtype->nr_uart; ++i) { + s->p[i].line = i; + /* Initialize port data */ + s->p[i].port.dev = dev; + s->p[i].port.irq = irq; + s->p[i].port.type = PORT_SC16IS7XX; + s->p[i].port.fifosize = SC16IS7XX_FIFO_SIZE; + s->p[i].port.flags = UPF_FIXED_TYPE | UPF_LOW_LATENCY; + s->p[i].port.iobase = i; + /* + * Use all ones as membase to make sure uart_configure_port() in + * serial_core.c does not abort for SPI/I2C devices where the + * membase address is not applicable. + */ + s->p[i].port.membase = (void __iomem *)~0; + s->p[i].port.iotype = UPIO_PORT; + s->p[i].port.uartclk = freq; + s->p[i].port.rs485_config = sc16is7xx_config_rs485; + s->p[i].port.ops = &sc16is7xx_ops; + s->p[i].port.line = sc16is7xx_alloc_line(); + if (s->p[i].port.line >= SC16IS7XX_MAX_DEVS) { + ret = -ENOMEM; + goto out_ports; + } + + /* Disable all interrupts */ + sc16is7xx_port_write(&s->p[i].port, SC16IS7XX_IER_REG, 0); + /* Disable TX/RX */ + sc16is7xx_port_write(&s->p[i].port, SC16IS7XX_EFCR_REG, + SC16IS7XX_EFCR_RXDISABLE_BIT | + SC16IS7XX_EFCR_TXDISABLE_BIT); + /* Initialize kthread work structs */ + kthread_init_work(&s->p[i].tx_work, sc16is7xx_tx_proc); + kthread_init_work(&s->p[i].reg_work, sc16is7xx_reg_proc); + /* Register port */ + uart_add_one_port(&sc16is7xx_uart, &s->p[i].port); + + /* Enable EFR */ + sc16is7xx_port_write(&s->p[i].port, SC16IS7XX_LCR_REG, + SC16IS7XX_LCR_CONF_MODE_B); + + regcache_cache_bypass(s->regmap, true); + + /* Enable write access to enhanced features */ + sc16is7xx_port_write(&s->p[i].port, SC16IS7XX_EFR_REG, + SC16IS7XX_EFR_ENABLE_BIT); + + regcache_cache_bypass(s->regmap, false); + + /* Restore access to general registers */ + sc16is7xx_port_write(&s->p[i].port, SC16IS7XX_LCR_REG, 0x00); + + /* Go to suspend mode */ + sc16is7xx_power(&s->p[i].port, 0); + } + + if (dev->of_node) { + struct property *prop; + const __be32 *p; + u32 u; + + of_property_for_each_u32(dev->of_node, "irda-mode-ports", + prop, p, u) + if (u < devtype->nr_uart) + s->p[u].irda_mode = true; + } + +#ifdef CONFIG_GPIOLIB + if (devtype->nr_gpio) { + /* Setup GPIO cotroller */ + s->gpio.owner = THIS_MODULE; + s->gpio.parent = dev; + s->gpio.label = dev_name(dev); + s->gpio.direction_input = sc16is7xx_gpio_direction_input; + s->gpio.get = sc16is7xx_gpio_get; + s->gpio.direction_output = sc16is7xx_gpio_direction_output; + s->gpio.set = sc16is7xx_gpio_set; + s->gpio.base = -1; + s->gpio.ngpio = devtype->nr_gpio; + s->gpio.can_sleep = 1; + ret = gpiochip_add_data(&s->gpio, s); + if (ret) + goto out_thread; + } +#endif + + /* + * Setup interrupt. We first try to acquire the IRQ line as level IRQ. + * If that succeeds, we can allow sharing the interrupt as well. + * In case the interrupt controller doesn't support that, we fall + * back to a non-shared falling-edge trigger. + */ + ret = devm_request_threaded_irq(dev, irq, NULL, sc16is7xx_irq, + IRQF_TRIGGER_LOW | IRQF_SHARED | + IRQF_ONESHOT, + dev_name(dev), s); + if (!ret) + return 0; + + ret = devm_request_threaded_irq(dev, irq, NULL, sc16is7xx_irq, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + dev_name(dev), s); + if (!ret) + return 0; + +#ifdef CONFIG_GPIOLIB + if (devtype->nr_gpio) + gpiochip_remove(&s->gpio); + +out_thread: +#endif + +out_ports: + for (i--; i >= 0; i--) { + uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port); + clear_bit(s->p[i].port.line, &sc16is7xx_lines); + } + + kthread_stop(s->kworker_task); + +out_clk: + if (!IS_ERR(s->clk)) + clk_disable_unprepare(s->clk); + + return ret; +} + +static int sc16is7xx_remove(struct device *dev) +{ + struct sc16is7xx_port *s = dev_get_drvdata(dev); + int i; + +#ifdef CONFIG_GPIOLIB + if (s->devtype->nr_gpio) + gpiochip_remove(&s->gpio); +#endif + + for (i = 0; i < s->devtype->nr_uart; i++) { + uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port); + clear_bit(s->p[i].port.line, &sc16is7xx_lines); + sc16is7xx_power(&s->p[i].port, 0); + } + + kthread_flush_worker(&s->kworker); + kthread_stop(s->kworker_task); + + if (!IS_ERR(s->clk)) + clk_disable_unprepare(s->clk); + + return 0; +} + +static const struct of_device_id __maybe_unused sc16is7xx_dt_ids[] = { + { .compatible = "nxp,sc16is740", .data = &sc16is74x_devtype, }, + { .compatible = "nxp,sc16is741", .data = &sc16is74x_devtype, }, + { .compatible = "nxp,sc16is750", .data = &sc16is750_devtype, }, + { .compatible = "nxp,sc16is752", .data = &sc16is752_devtype, }, + { .compatible = "nxp,sc16is760", .data = &sc16is760_devtype, }, + { .compatible = "nxp,sc16is762", .data = &sc16is762_devtype, }, + { } +}; +MODULE_DEVICE_TABLE(of, sc16is7xx_dt_ids); + +static struct regmap_config regcfg = { + .reg_bits = 7, + .pad_bits = 1, + .val_bits = 8, + .cache_type = REGCACHE_RBTREE, + .volatile_reg = sc16is7xx_regmap_volatile, + .precious_reg = sc16is7xx_regmap_precious, +}; + +#ifdef CONFIG_SERIAL_SC16IS7XX_SPI +static int sc16is7xx_spi_probe(struct spi_device *spi) +{ + const struct sc16is7xx_devtype *devtype; + struct regmap *regmap; + int ret; + + /* Setup SPI bus */ + spi->bits_per_word = 8; + /* only supports mode 0 on SC16IS762 */ + spi->mode = spi->mode ? : SPI_MODE_0; + spi->max_speed_hz = spi->max_speed_hz ? : 15000000; + ret = spi_setup(spi); + if (ret) + return ret; + + if (spi->dev.of_node) { + devtype = device_get_match_data(&spi->dev); + if (!devtype) + return -ENODEV; + } else { + const struct spi_device_id *id_entry = spi_get_device_id(spi); + + devtype = (struct sc16is7xx_devtype *)id_entry->driver_data; + } + + regcfg.max_register = (0xf << SC16IS7XX_REG_SHIFT) | + (devtype->nr_uart - 1); + regmap = devm_regmap_init_spi(spi, ®cfg); + + return sc16is7xx_probe(&spi->dev, devtype, regmap, spi->irq); +} + +static int sc16is7xx_spi_remove(struct spi_device *spi) +{ + return sc16is7xx_remove(&spi->dev); +} + +static const struct spi_device_id sc16is7xx_spi_id_table[] = { + { "sc16is74x", (kernel_ulong_t)&sc16is74x_devtype, }, + { "sc16is740", (kernel_ulong_t)&sc16is74x_devtype, }, + { "sc16is741", (kernel_ulong_t)&sc16is74x_devtype, }, + { "sc16is750", (kernel_ulong_t)&sc16is750_devtype, }, + { "sc16is752", (kernel_ulong_t)&sc16is752_devtype, }, + { "sc16is760", (kernel_ulong_t)&sc16is760_devtype, }, + { "sc16is762", (kernel_ulong_t)&sc16is762_devtype, }, + { } +}; + +MODULE_DEVICE_TABLE(spi, sc16is7xx_spi_id_table); + +static struct spi_driver sc16is7xx_spi_uart_driver = { + .driver = { + .name = SC16IS7XX_NAME, + .of_match_table = sc16is7xx_dt_ids, + }, + .probe = sc16is7xx_spi_probe, + .remove = sc16is7xx_spi_remove, + .id_table = sc16is7xx_spi_id_table, +}; + +MODULE_ALIAS("spi:sc16is7xx"); +#endif + +#ifdef CONFIG_SERIAL_SC16IS7XX_I2C +static int sc16is7xx_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + const struct sc16is7xx_devtype *devtype; + struct regmap *regmap; + + if (i2c->dev.of_node) { + devtype = device_get_match_data(&i2c->dev); + if (!devtype) + return -ENODEV; + } else { + devtype = (struct sc16is7xx_devtype *)id->driver_data; + } + + regcfg.max_register = (0xf << SC16IS7XX_REG_SHIFT) | + (devtype->nr_uart - 1); + regmap = devm_regmap_init_i2c(i2c, ®cfg); + + return sc16is7xx_probe(&i2c->dev, devtype, regmap, i2c->irq); +} + +static int sc16is7xx_i2c_remove(struct i2c_client *client) +{ + return sc16is7xx_remove(&client->dev); +} + +static const struct i2c_device_id sc16is7xx_i2c_id_table[] = { + { "sc16is74x", (kernel_ulong_t)&sc16is74x_devtype, }, + { "sc16is740", (kernel_ulong_t)&sc16is74x_devtype, }, + { "sc16is741", (kernel_ulong_t)&sc16is74x_devtype, }, + { "sc16is750", (kernel_ulong_t)&sc16is750_devtype, }, + { "sc16is752", (kernel_ulong_t)&sc16is752_devtype, }, + { "sc16is760", (kernel_ulong_t)&sc16is760_devtype, }, + { "sc16is762", (kernel_ulong_t)&sc16is762_devtype, }, + { } +}; +MODULE_DEVICE_TABLE(i2c, sc16is7xx_i2c_id_table); + +static struct i2c_driver sc16is7xx_i2c_uart_driver = { + .driver = { + .name = SC16IS7XX_NAME, + .of_match_table = sc16is7xx_dt_ids, + }, + .probe = sc16is7xx_i2c_probe, + .remove = sc16is7xx_i2c_remove, + .id_table = sc16is7xx_i2c_id_table, +}; + +#endif + +static int __init sc16is7xx_init(void) +{ + int ret; + + ret = uart_register_driver(&sc16is7xx_uart); + if (ret) { + pr_err("Registering UART driver failed\n"); + return ret; + } + +#ifdef CONFIG_SERIAL_SC16IS7XX_I2C + ret = i2c_add_driver(&sc16is7xx_i2c_uart_driver); + if (ret < 0) { + pr_err("failed to init sc16is7xx i2c --> %d\n", ret); + goto err_i2c; + } +#endif + +#ifdef CONFIG_SERIAL_SC16IS7XX_SPI + ret = spi_register_driver(&sc16is7xx_spi_uart_driver); + if (ret < 0) { + pr_err("failed to init sc16is7xx spi --> %d\n", ret); + goto err_spi; + } +#endif + return ret; + +#ifdef CONFIG_SERIAL_SC16IS7XX_SPI +err_spi: +#endif +#ifdef CONFIG_SERIAL_SC16IS7XX_I2C + i2c_del_driver(&sc16is7xx_i2c_uart_driver); +err_i2c: +#endif + uart_unregister_driver(&sc16is7xx_uart); + return ret; +} +module_init(sc16is7xx_init); + +static void __exit sc16is7xx_exit(void) +{ +#ifdef CONFIG_SERIAL_SC16IS7XX_I2C + i2c_del_driver(&sc16is7xx_i2c_uart_driver); +#endif + +#ifdef CONFIG_SERIAL_SC16IS7XX_SPI + spi_unregister_driver(&sc16is7xx_spi_uart_driver); +#endif + uart_unregister_driver(&sc16is7xx_uart); +} +module_exit(sc16is7xx_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Jon Ringle "); +MODULE_DESCRIPTION("SC16IS7XX serial driver"); diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c new file mode 100644 index 000000000..10cc16a71 --- /dev/null +++ b/drivers/tty/serial/sccnxp.c @@ -0,0 +1,1068 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * NXP (Philips) SCC+++(SCN+++) serial driver + * + * Copyright (C) 2012 Alexander Shiyan + * + * Based on sc26xx.c, by Thomas Bogendörfer (tsbogend@alpha.franken.de) + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define SCCNXP_NAME "uart-sccnxp" +#define SCCNXP_MAJOR 204 +#define SCCNXP_MINOR 205 + +#define SCCNXP_MR_REG (0x00) +# define MR0_BAUD_NORMAL (0 << 0) +# define MR0_BAUD_EXT1 (1 << 0) +# define MR0_BAUD_EXT2 (5 << 0) +# define MR0_FIFO (1 << 3) +# define MR0_TXLVL (1 << 4) +# define MR1_BITS_5 (0 << 0) +# define MR1_BITS_6 (1 << 0) +# define MR1_BITS_7 (2 << 0) +# define MR1_BITS_8 (3 << 0) +# define MR1_PAR_EVN (0 << 2) +# define MR1_PAR_ODD (1 << 2) +# define MR1_PAR_NO (4 << 2) +# define MR2_STOP1 (7 << 0) +# define MR2_STOP2 (0xf << 0) +#define SCCNXP_SR_REG (0x01) +# define SR_RXRDY (1 << 0) +# define SR_FULL (1 << 1) +# define SR_TXRDY (1 << 2) +# define SR_TXEMT (1 << 3) +# define SR_OVR (1 << 4) +# define SR_PE (1 << 5) +# define SR_FE (1 << 6) +# define SR_BRK (1 << 7) +#define SCCNXP_CSR_REG (SCCNXP_SR_REG) +# define CSR_TIMER_MODE (0x0d) +#define SCCNXP_CR_REG (0x02) +# define CR_RX_ENABLE (1 << 0) +# define CR_RX_DISABLE (1 << 1) +# define CR_TX_ENABLE (1 << 2) +# define CR_TX_DISABLE (1 << 3) +# define CR_CMD_MRPTR1 (0x01 << 4) +# define CR_CMD_RX_RESET (0x02 << 4) +# define CR_CMD_TX_RESET (0x03 << 4) +# define CR_CMD_STATUS_RESET (0x04 << 4) +# define CR_CMD_BREAK_RESET (0x05 << 4) +# define CR_CMD_START_BREAK (0x06 << 4) +# define CR_CMD_STOP_BREAK (0x07 << 4) +# define CR_CMD_MRPTR0 (0x0b << 4) +#define SCCNXP_RHR_REG (0x03) +#define SCCNXP_THR_REG SCCNXP_RHR_REG +#define SCCNXP_IPCR_REG (0x04) +#define SCCNXP_ACR_REG SCCNXP_IPCR_REG +# define ACR_BAUD0 (0 << 7) +# define ACR_BAUD1 (1 << 7) +# define ACR_TIMER_MODE (6 << 4) +#define SCCNXP_ISR_REG (0x05) +#define SCCNXP_IMR_REG SCCNXP_ISR_REG +# define IMR_TXRDY (1 << 0) +# define IMR_RXRDY (1 << 1) +# define ISR_TXRDY(x) (1 << ((x * 4) + 0)) +# define ISR_RXRDY(x) (1 << ((x * 4) + 1)) +#define SCCNXP_CTPU_REG (0x06) +#define SCCNXP_CTPL_REG (0x07) +#define SCCNXP_IPR_REG (0x0d) +#define SCCNXP_OPCR_REG SCCNXP_IPR_REG +#define SCCNXP_SOP_REG (0x0e) +#define SCCNXP_START_COUNTER_REG SCCNXP_SOP_REG +#define SCCNXP_ROP_REG (0x0f) + +/* Route helpers */ +#define MCTRL_MASK(sig) (0xf << (sig)) +#define MCTRL_IBIT(cfg, sig) ((((cfg) >> (sig)) & 0xf) - LINE_IP0) +#define MCTRL_OBIT(cfg, sig) ((((cfg) >> (sig)) & 0xf) - LINE_OP0) + +#define SCCNXP_HAVE_IO 0x00000001 +#define SCCNXP_HAVE_MR0 0x00000002 + +struct sccnxp_chip { + const char *name; + unsigned int nr; + unsigned long freq_min; + unsigned long freq_std; + unsigned long freq_max; + unsigned int flags; + unsigned int fifosize; + /* Time between read/write cycles */ + unsigned int trwd; +}; + +struct sccnxp_port { + struct uart_driver uart; + struct uart_port port[SCCNXP_MAX_UARTS]; + bool opened[SCCNXP_MAX_UARTS]; + + int irq; + u8 imr; + + struct sccnxp_chip *chip; + +#ifdef CONFIG_SERIAL_SCCNXP_CONSOLE + struct console console; +#endif + + spinlock_t lock; + + bool poll; + struct timer_list timer; + + struct sccnxp_pdata pdata; + + struct regulator *regulator; +}; + +static const struct sccnxp_chip sc2681 = { + .name = "SC2681", + .nr = 2, + .freq_min = 1000000, + .freq_std = 3686400, + .freq_max = 4000000, + .flags = SCCNXP_HAVE_IO, + .fifosize = 3, + .trwd = 200, +}; + +static const struct sccnxp_chip sc2691 = { + .name = "SC2691", + .nr = 1, + .freq_min = 1000000, + .freq_std = 3686400, + .freq_max = 4000000, + .flags = 0, + .fifosize = 3, + .trwd = 150, +}; + +static const struct sccnxp_chip sc2692 = { + .name = "SC2692", + .nr = 2, + .freq_min = 1000000, + .freq_std = 3686400, + .freq_max = 4000000, + .flags = SCCNXP_HAVE_IO, + .fifosize = 3, + .trwd = 30, +}; + +static const struct sccnxp_chip sc2891 = { + .name = "SC2891", + .nr = 1, + .freq_min = 100000, + .freq_std = 3686400, + .freq_max = 8000000, + .flags = SCCNXP_HAVE_IO | SCCNXP_HAVE_MR0, + .fifosize = 16, + .trwd = 27, +}; + +static const struct sccnxp_chip sc2892 = { + .name = "SC2892", + .nr = 2, + .freq_min = 100000, + .freq_std = 3686400, + .freq_max = 8000000, + .flags = SCCNXP_HAVE_IO | SCCNXP_HAVE_MR0, + .fifosize = 16, + .trwd = 17, +}; + +static const struct sccnxp_chip sc28202 = { + .name = "SC28202", + .nr = 2, + .freq_min = 1000000, + .freq_std = 14745600, + .freq_max = 50000000, + .flags = SCCNXP_HAVE_IO | SCCNXP_HAVE_MR0, + .fifosize = 256, + .trwd = 10, +}; + +static const struct sccnxp_chip sc68681 = { + .name = "SC68681", + .nr = 2, + .freq_min = 1000000, + .freq_std = 3686400, + .freq_max = 4000000, + .flags = SCCNXP_HAVE_IO, + .fifosize = 3, + .trwd = 200, +}; + +static const struct sccnxp_chip sc68692 = { + .name = "SC68692", + .nr = 2, + .freq_min = 1000000, + .freq_std = 3686400, + .freq_max = 4000000, + .flags = SCCNXP_HAVE_IO, + .fifosize = 3, + .trwd = 200, +}; + +static u8 sccnxp_read(struct uart_port *port, u8 reg) +{ + struct sccnxp_port *s = dev_get_drvdata(port->dev); + u8 ret; + + ret = readb(port->membase + (reg << port->regshift)); + + ndelay(s->chip->trwd); + + return ret; +} + +static void sccnxp_write(struct uart_port *port, u8 reg, u8 v) +{ + struct sccnxp_port *s = dev_get_drvdata(port->dev); + + writeb(v, port->membase + (reg << port->regshift)); + + ndelay(s->chip->trwd); +} + +static u8 sccnxp_port_read(struct uart_port *port, u8 reg) +{ + return sccnxp_read(port, (port->line << 3) + reg); +} + +static void sccnxp_port_write(struct uart_port *port, u8 reg, u8 v) +{ + sccnxp_write(port, (port->line << 3) + reg, v); +} + +static int sccnxp_update_best_err(int a, int b, int *besterr) +{ + int err = abs(a - b); + + if (*besterr > err) { + *besterr = err; + return 0; + } + + return 1; +} + +static const struct { + u8 csr; + u8 acr; + u8 mr0; + int baud; +} baud_std[] = { + { 0, ACR_BAUD0, MR0_BAUD_NORMAL, 50, }, + { 0, ACR_BAUD1, MR0_BAUD_NORMAL, 75, }, + { 1, ACR_BAUD0, MR0_BAUD_NORMAL, 110, }, + { 2, ACR_BAUD0, MR0_BAUD_NORMAL, 134, }, + { 3, ACR_BAUD1, MR0_BAUD_NORMAL, 150, }, + { 3, ACR_BAUD0, MR0_BAUD_NORMAL, 200, }, + { 4, ACR_BAUD0, MR0_BAUD_NORMAL, 300, }, + { 0, ACR_BAUD1, MR0_BAUD_EXT1, 450, }, + { 1, ACR_BAUD0, MR0_BAUD_EXT2, 880, }, + { 3, ACR_BAUD1, MR0_BAUD_EXT1, 900, }, + { 5, ACR_BAUD0, MR0_BAUD_NORMAL, 600, }, + { 7, ACR_BAUD0, MR0_BAUD_NORMAL, 1050, }, + { 2, ACR_BAUD0, MR0_BAUD_EXT2, 1076, }, + { 6, ACR_BAUD0, MR0_BAUD_NORMAL, 1200, }, + { 10, ACR_BAUD1, MR0_BAUD_NORMAL, 1800, }, + { 7, ACR_BAUD1, MR0_BAUD_NORMAL, 2000, }, + { 8, ACR_BAUD0, MR0_BAUD_NORMAL, 2400, }, + { 5, ACR_BAUD1, MR0_BAUD_EXT1, 3600, }, + { 9, ACR_BAUD0, MR0_BAUD_NORMAL, 4800, }, + { 10, ACR_BAUD0, MR0_BAUD_NORMAL, 7200, }, + { 11, ACR_BAUD0, MR0_BAUD_NORMAL, 9600, }, + { 8, ACR_BAUD0, MR0_BAUD_EXT1, 14400, }, + { 12, ACR_BAUD1, MR0_BAUD_NORMAL, 19200, }, + { 9, ACR_BAUD0, MR0_BAUD_EXT1, 28800, }, + { 12, ACR_BAUD0, MR0_BAUD_NORMAL, 38400, }, + { 11, ACR_BAUD0, MR0_BAUD_EXT1, 57600, }, + { 12, ACR_BAUD1, MR0_BAUD_EXT1, 115200, }, + { 12, ACR_BAUD0, MR0_BAUD_EXT1, 230400, }, + { 0, 0, 0, 0 } +}; + +static int sccnxp_set_baud(struct uart_port *port, int baud) +{ + struct sccnxp_port *s = dev_get_drvdata(port->dev); + int div_std, tmp_baud, bestbaud = INT_MAX, besterr = INT_MAX; + struct sccnxp_chip *chip = s->chip; + u8 i, acr = 0, csr = 0, mr0 = 0; + + /* Find divisor to load to the timer preset registers */ + div_std = DIV_ROUND_CLOSEST(port->uartclk, 2 * 16 * baud); + if ((div_std >= 2) && (div_std <= 0xffff)) { + bestbaud = DIV_ROUND_CLOSEST(port->uartclk, 2 * 16 * div_std); + sccnxp_update_best_err(baud, bestbaud, &besterr); + csr = CSR_TIMER_MODE; + sccnxp_port_write(port, SCCNXP_CTPU_REG, div_std >> 8); + sccnxp_port_write(port, SCCNXP_CTPL_REG, div_std); + /* Issue start timer/counter command */ + sccnxp_port_read(port, SCCNXP_START_COUNTER_REG); + } + + /* Find best baud from table */ + for (i = 0; baud_std[i].baud && besterr; i++) { + if (baud_std[i].mr0 && !(chip->flags & SCCNXP_HAVE_MR0)) + continue; + div_std = DIV_ROUND_CLOSEST(chip->freq_std, baud_std[i].baud); + tmp_baud = DIV_ROUND_CLOSEST(port->uartclk, div_std); + if (!sccnxp_update_best_err(baud, tmp_baud, &besterr)) { + acr = baud_std[i].acr; + csr = baud_std[i].csr; + mr0 = baud_std[i].mr0; + bestbaud = tmp_baud; + } + } + + if (chip->flags & SCCNXP_HAVE_MR0) { + /* Enable FIFO, set half level for TX */ + mr0 |= MR0_FIFO | MR0_TXLVL; + /* Update MR0 */ + sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_MRPTR0); + sccnxp_port_write(port, SCCNXP_MR_REG, mr0); + } + + sccnxp_port_write(port, SCCNXP_ACR_REG, acr | ACR_TIMER_MODE); + sccnxp_port_write(port, SCCNXP_CSR_REG, (csr << 4) | csr); + + if (baud != bestbaud) + dev_dbg(port->dev, "Baudrate desired: %i, calculated: %i\n", + baud, bestbaud); + + return bestbaud; +} + +static void sccnxp_enable_irq(struct uart_port *port, int mask) +{ + struct sccnxp_port *s = dev_get_drvdata(port->dev); + + s->imr |= mask << (port->line * 4); + sccnxp_write(port, SCCNXP_IMR_REG, s->imr); +} + +static void sccnxp_disable_irq(struct uart_port *port, int mask) +{ + struct sccnxp_port *s = dev_get_drvdata(port->dev); + + s->imr &= ~(mask << (port->line * 4)); + sccnxp_write(port, SCCNXP_IMR_REG, s->imr); +} + +static void sccnxp_set_bit(struct uart_port *port, int sig, int state) +{ + u8 bitmask; + struct sccnxp_port *s = dev_get_drvdata(port->dev); + + if (s->pdata.mctrl_cfg[port->line] & MCTRL_MASK(sig)) { + bitmask = 1 << MCTRL_OBIT(s->pdata.mctrl_cfg[port->line], sig); + if (state) + sccnxp_write(port, SCCNXP_SOP_REG, bitmask); + else + sccnxp_write(port, SCCNXP_ROP_REG, bitmask); + } +} + +static void sccnxp_handle_rx(struct uart_port *port) +{ + u8 sr; + unsigned int ch, flag; + + for (;;) { + sr = sccnxp_port_read(port, SCCNXP_SR_REG); + if (!(sr & SR_RXRDY)) + break; + sr &= SR_PE | SR_FE | SR_OVR | SR_BRK; + + ch = sccnxp_port_read(port, SCCNXP_RHR_REG); + + port->icount.rx++; + flag = TTY_NORMAL; + + if (unlikely(sr)) { + if (sr & SR_BRK) { + port->icount.brk++; + sccnxp_port_write(port, SCCNXP_CR_REG, + CR_CMD_BREAK_RESET); + if (uart_handle_break(port)) + continue; + } else if (sr & SR_PE) + port->icount.parity++; + else if (sr & SR_FE) + port->icount.frame++; + else if (sr & SR_OVR) { + port->icount.overrun++; + sccnxp_port_write(port, SCCNXP_CR_REG, + CR_CMD_STATUS_RESET); + } + + sr &= port->read_status_mask; + if (sr & SR_BRK) + flag = TTY_BREAK; + else if (sr & SR_PE) + flag = TTY_PARITY; + else if (sr & SR_FE) + flag = TTY_FRAME; + else if (sr & SR_OVR) + flag = TTY_OVERRUN; + } + + if (uart_handle_sysrq_char(port, ch)) + continue; + + if (sr & port->ignore_status_mask) + continue; + + uart_insert_char(port, sr, SR_OVR, ch, flag); + } + + tty_flip_buffer_push(&port->state->port); +} + +static void sccnxp_handle_tx(struct uart_port *port) +{ + u8 sr; + struct circ_buf *xmit = &port->state->xmit; + struct sccnxp_port *s = dev_get_drvdata(port->dev); + + if (unlikely(port->x_char)) { + sccnxp_port_write(port, SCCNXP_THR_REG, port->x_char); + port->icount.tx++; + port->x_char = 0; + return; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + /* Disable TX if FIFO is empty */ + if (sccnxp_port_read(port, SCCNXP_SR_REG) & SR_TXEMT) { + sccnxp_disable_irq(port, IMR_TXRDY); + + /* Set direction to input */ + if (s->chip->flags & SCCNXP_HAVE_IO) + sccnxp_set_bit(port, DIR_OP, 0); + } + return; + } + + while (!uart_circ_empty(xmit)) { + sr = sccnxp_port_read(port, SCCNXP_SR_REG); + if (!(sr & SR_TXRDY)) + break; + + sccnxp_port_write(port, SCCNXP_THR_REG, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); +} + +static void sccnxp_handle_events(struct sccnxp_port *s) +{ + int i; + u8 isr; + + do { + isr = sccnxp_read(&s->port[0], SCCNXP_ISR_REG); + isr &= s->imr; + if (!isr) + break; + + for (i = 0; i < s->uart.nr; i++) { + if (s->opened[i] && (isr & ISR_RXRDY(i))) + sccnxp_handle_rx(&s->port[i]); + if (s->opened[i] && (isr & ISR_TXRDY(i))) + sccnxp_handle_tx(&s->port[i]); + } + } while (1); +} + +static void sccnxp_timer(struct timer_list *t) +{ + struct sccnxp_port *s = from_timer(s, t, timer); + unsigned long flags; + + spin_lock_irqsave(&s->lock, flags); + sccnxp_handle_events(s); + spin_unlock_irqrestore(&s->lock, flags); + + mod_timer(&s->timer, jiffies + usecs_to_jiffies(s->pdata.poll_time_us)); +} + +static irqreturn_t sccnxp_ist(int irq, void *dev_id) +{ + struct sccnxp_port *s = (struct sccnxp_port *)dev_id; + unsigned long flags; + + spin_lock_irqsave(&s->lock, flags); + sccnxp_handle_events(s); + spin_unlock_irqrestore(&s->lock, flags); + + return IRQ_HANDLED; +} + +static void sccnxp_start_tx(struct uart_port *port) +{ + struct sccnxp_port *s = dev_get_drvdata(port->dev); + unsigned long flags; + + spin_lock_irqsave(&s->lock, flags); + + /* Set direction to output */ + if (s->chip->flags & SCCNXP_HAVE_IO) + sccnxp_set_bit(port, DIR_OP, 1); + + sccnxp_enable_irq(port, IMR_TXRDY); + + spin_unlock_irqrestore(&s->lock, flags); +} + +static void sccnxp_stop_tx(struct uart_port *port) +{ + /* Do nothing */ +} + +static void sccnxp_stop_rx(struct uart_port *port) +{ + struct sccnxp_port *s = dev_get_drvdata(port->dev); + unsigned long flags; + + spin_lock_irqsave(&s->lock, flags); + sccnxp_port_write(port, SCCNXP_CR_REG, CR_RX_DISABLE); + spin_unlock_irqrestore(&s->lock, flags); +} + +static unsigned int sccnxp_tx_empty(struct uart_port *port) +{ + u8 val; + unsigned long flags; + struct sccnxp_port *s = dev_get_drvdata(port->dev); + + spin_lock_irqsave(&s->lock, flags); + val = sccnxp_port_read(port, SCCNXP_SR_REG); + spin_unlock_irqrestore(&s->lock, flags); + + return (val & SR_TXEMT) ? TIOCSER_TEMT : 0; +} + +static void sccnxp_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct sccnxp_port *s = dev_get_drvdata(port->dev); + unsigned long flags; + + if (!(s->chip->flags & SCCNXP_HAVE_IO)) + return; + + spin_lock_irqsave(&s->lock, flags); + + sccnxp_set_bit(port, DTR_OP, mctrl & TIOCM_DTR); + sccnxp_set_bit(port, RTS_OP, mctrl & TIOCM_RTS); + + spin_unlock_irqrestore(&s->lock, flags); +} + +static unsigned int sccnxp_get_mctrl(struct uart_port *port) +{ + u8 bitmask, ipr; + unsigned long flags; + struct sccnxp_port *s = dev_get_drvdata(port->dev); + unsigned int mctrl = TIOCM_DSR | TIOCM_CTS | TIOCM_CAR; + + if (!(s->chip->flags & SCCNXP_HAVE_IO)) + return mctrl; + + spin_lock_irqsave(&s->lock, flags); + + ipr = ~sccnxp_read(port, SCCNXP_IPCR_REG); + + if (s->pdata.mctrl_cfg[port->line] & MCTRL_MASK(DSR_IP)) { + bitmask = 1 << MCTRL_IBIT(s->pdata.mctrl_cfg[port->line], + DSR_IP); + mctrl &= ~TIOCM_DSR; + mctrl |= (ipr & bitmask) ? TIOCM_DSR : 0; + } + if (s->pdata.mctrl_cfg[port->line] & MCTRL_MASK(CTS_IP)) { + bitmask = 1 << MCTRL_IBIT(s->pdata.mctrl_cfg[port->line], + CTS_IP); + mctrl &= ~TIOCM_CTS; + mctrl |= (ipr & bitmask) ? TIOCM_CTS : 0; + } + if (s->pdata.mctrl_cfg[port->line] & MCTRL_MASK(DCD_IP)) { + bitmask = 1 << MCTRL_IBIT(s->pdata.mctrl_cfg[port->line], + DCD_IP); + mctrl &= ~TIOCM_CAR; + mctrl |= (ipr & bitmask) ? TIOCM_CAR : 0; + } + if (s->pdata.mctrl_cfg[port->line] & MCTRL_MASK(RNG_IP)) { + bitmask = 1 << MCTRL_IBIT(s->pdata.mctrl_cfg[port->line], + RNG_IP); + mctrl &= ~TIOCM_RNG; + mctrl |= (ipr & bitmask) ? TIOCM_RNG : 0; + } + + spin_unlock_irqrestore(&s->lock, flags); + + return mctrl; +} + +static void sccnxp_break_ctl(struct uart_port *port, int break_state) +{ + struct sccnxp_port *s = dev_get_drvdata(port->dev); + unsigned long flags; + + spin_lock_irqsave(&s->lock, flags); + sccnxp_port_write(port, SCCNXP_CR_REG, break_state ? + CR_CMD_START_BREAK : CR_CMD_STOP_BREAK); + spin_unlock_irqrestore(&s->lock, flags); +} + +static void sccnxp_set_termios(struct uart_port *port, + struct ktermios *termios, struct ktermios *old) +{ + struct sccnxp_port *s = dev_get_drvdata(port->dev); + unsigned long flags; + u8 mr1, mr2; + int baud; + + spin_lock_irqsave(&s->lock, flags); + + /* Mask termios capabilities we don't support */ + termios->c_cflag &= ~CMSPAR; + + /* Disable RX & TX, reset break condition, status and FIFOs */ + sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_RX_RESET | + CR_RX_DISABLE | CR_TX_DISABLE); + sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_TX_RESET); + sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_STATUS_RESET); + sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_BREAK_RESET); + + /* Word size */ + switch (termios->c_cflag & CSIZE) { + case CS5: + mr1 = MR1_BITS_5; + break; + case CS6: + mr1 = MR1_BITS_6; + break; + case CS7: + mr1 = MR1_BITS_7; + break; + case CS8: + default: + mr1 = MR1_BITS_8; + break; + } + + /* Parity */ + if (termios->c_cflag & PARENB) { + if (termios->c_cflag & PARODD) + mr1 |= MR1_PAR_ODD; + } else + mr1 |= MR1_PAR_NO; + + /* Stop bits */ + mr2 = (termios->c_cflag & CSTOPB) ? MR2_STOP2 : MR2_STOP1; + + /* Update desired format */ + sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_MRPTR1); + sccnxp_port_write(port, SCCNXP_MR_REG, mr1); + sccnxp_port_write(port, SCCNXP_MR_REG, mr2); + + /* Set read status mask */ + port->read_status_mask = SR_OVR; + if (termios->c_iflag & INPCK) + port->read_status_mask |= SR_PE | SR_FE; + if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) + port->read_status_mask |= SR_BRK; + + /* Set status ignore mask */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNBRK) + port->ignore_status_mask |= SR_BRK; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= SR_PE; + if (!(termios->c_cflag & CREAD)) + port->ignore_status_mask |= SR_PE | SR_OVR | SR_FE | SR_BRK; + + /* Setup baudrate */ + baud = uart_get_baud_rate(port, termios, old, 50, + (s->chip->flags & SCCNXP_HAVE_MR0) ? + 230400 : 38400); + baud = sccnxp_set_baud(port, baud); + + /* Update timeout according to new baud rate */ + uart_update_timeout(port, termios->c_cflag, baud); + + /* Report actual baudrate back to core */ + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, baud, baud); + + /* Enable RX & TX */ + sccnxp_port_write(port, SCCNXP_CR_REG, CR_RX_ENABLE | CR_TX_ENABLE); + + spin_unlock_irqrestore(&s->lock, flags); +} + +static int sccnxp_startup(struct uart_port *port) +{ + struct sccnxp_port *s = dev_get_drvdata(port->dev); + unsigned long flags; + + spin_lock_irqsave(&s->lock, flags); + + if (s->chip->flags & SCCNXP_HAVE_IO) { + /* Outputs are controlled manually */ + sccnxp_write(port, SCCNXP_OPCR_REG, 0); + } + + /* Reset break condition, status and FIFOs */ + sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_RX_RESET); + sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_TX_RESET); + sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_STATUS_RESET); + sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_BREAK_RESET); + + /* Enable RX & TX */ + sccnxp_port_write(port, SCCNXP_CR_REG, CR_RX_ENABLE | CR_TX_ENABLE); + + /* Enable RX interrupt */ + sccnxp_enable_irq(port, IMR_RXRDY); + + s->opened[port->line] = 1; + + spin_unlock_irqrestore(&s->lock, flags); + + return 0; +} + +static void sccnxp_shutdown(struct uart_port *port) +{ + struct sccnxp_port *s = dev_get_drvdata(port->dev); + unsigned long flags; + + spin_lock_irqsave(&s->lock, flags); + + s->opened[port->line] = 0; + + /* Disable interrupts */ + sccnxp_disable_irq(port, IMR_TXRDY | IMR_RXRDY); + + /* Disable TX & RX */ + sccnxp_port_write(port, SCCNXP_CR_REG, CR_RX_DISABLE | CR_TX_DISABLE); + + /* Leave direction to input */ + if (s->chip->flags & SCCNXP_HAVE_IO) + sccnxp_set_bit(port, DIR_OP, 0); + + spin_unlock_irqrestore(&s->lock, flags); +} + +static const char *sccnxp_type(struct uart_port *port) +{ + struct sccnxp_port *s = dev_get_drvdata(port->dev); + + return (port->type == PORT_SC26XX) ? s->chip->name : NULL; +} + +static void sccnxp_release_port(struct uart_port *port) +{ + /* Do nothing */ +} + +static int sccnxp_request_port(struct uart_port *port) +{ + /* Do nothing */ + return 0; +} + +static void sccnxp_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) + port->type = PORT_SC26XX; +} + +static int sccnxp_verify_port(struct uart_port *port, struct serial_struct *s) +{ + if ((s->type == PORT_UNKNOWN) || (s->type == PORT_SC26XX)) + return 0; + if (s->irq == port->irq) + return 0; + + return -EINVAL; +} + +static const struct uart_ops sccnxp_ops = { + .tx_empty = sccnxp_tx_empty, + .set_mctrl = sccnxp_set_mctrl, + .get_mctrl = sccnxp_get_mctrl, + .stop_tx = sccnxp_stop_tx, + .start_tx = sccnxp_start_tx, + .stop_rx = sccnxp_stop_rx, + .break_ctl = sccnxp_break_ctl, + .startup = sccnxp_startup, + .shutdown = sccnxp_shutdown, + .set_termios = sccnxp_set_termios, + .type = sccnxp_type, + .release_port = sccnxp_release_port, + .request_port = sccnxp_request_port, + .config_port = sccnxp_config_port, + .verify_port = sccnxp_verify_port, +}; + +#ifdef CONFIG_SERIAL_SCCNXP_CONSOLE +static void sccnxp_console_putchar(struct uart_port *port, int c) +{ + int tryes = 100000; + + while (tryes--) { + if (sccnxp_port_read(port, SCCNXP_SR_REG) & SR_TXRDY) { + sccnxp_port_write(port, SCCNXP_THR_REG, c); + break; + } + barrier(); + } +} + +static void sccnxp_console_write(struct console *co, const char *c, unsigned n) +{ + struct sccnxp_port *s = (struct sccnxp_port *)co->data; + struct uart_port *port = &s->port[co->index]; + unsigned long flags; + + spin_lock_irqsave(&s->lock, flags); + uart_console_write(port, c, n, sccnxp_console_putchar); + spin_unlock_irqrestore(&s->lock, flags); +} + +static int sccnxp_console_setup(struct console *co, char *options) +{ + struct sccnxp_port *s = (struct sccnxp_port *)co->data; + struct uart_port *port = &s->port[(co->index > 0) ? co->index : 0]; + int baud = 9600, bits = 8, parity = 'n', flow = 'n'; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} +#endif + +static const struct platform_device_id sccnxp_id_table[] = { + { .name = "sc2681", .driver_data = (kernel_ulong_t)&sc2681, }, + { .name = "sc2691", .driver_data = (kernel_ulong_t)&sc2691, }, + { .name = "sc2692", .driver_data = (kernel_ulong_t)&sc2692, }, + { .name = "sc2891", .driver_data = (kernel_ulong_t)&sc2891, }, + { .name = "sc2892", .driver_data = (kernel_ulong_t)&sc2892, }, + { .name = "sc28202", .driver_data = (kernel_ulong_t)&sc28202, }, + { .name = "sc68681", .driver_data = (kernel_ulong_t)&sc68681, }, + { .name = "sc68692", .driver_data = (kernel_ulong_t)&sc68692, }, + { } +}; +MODULE_DEVICE_TABLE(platform, sccnxp_id_table); + +static int sccnxp_probe(struct platform_device *pdev) +{ + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + struct sccnxp_pdata *pdata = dev_get_platdata(&pdev->dev); + int i, ret, uartclk; + struct sccnxp_port *s; + void __iomem *membase; + struct clk *clk; + + membase = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(membase)) + return PTR_ERR(membase); + + s = devm_kzalloc(&pdev->dev, sizeof(struct sccnxp_port), GFP_KERNEL); + if (!s) { + dev_err(&pdev->dev, "Error allocating port structure\n"); + return -ENOMEM; + } + platform_set_drvdata(pdev, s); + + spin_lock_init(&s->lock); + + s->chip = (struct sccnxp_chip *)pdev->id_entry->driver_data; + + s->regulator = devm_regulator_get(&pdev->dev, "vcc"); + if (!IS_ERR(s->regulator)) { + ret = regulator_enable(s->regulator); + if (ret) { + dev_err(&pdev->dev, + "Failed to enable regulator: %i\n", ret); + return ret; + } + } else if (PTR_ERR(s->regulator) == -EPROBE_DEFER) + return -EPROBE_DEFER; + + clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(clk)) { + ret = PTR_ERR(clk); + if (ret == -EPROBE_DEFER) + goto err_out; + uartclk = 0; + } else { + ret = clk_prepare_enable(clk); + if (ret) + goto err_out; + + ret = devm_add_action_or_reset(&pdev->dev, + (void(*)(void *))clk_disable_unprepare, + clk); + if (ret) + goto err_out; + + uartclk = clk_get_rate(clk); + } + + if (!uartclk) { + dev_notice(&pdev->dev, "Using default clock frequency\n"); + uartclk = s->chip->freq_std; + } + + /* Check input frequency */ + if ((uartclk < s->chip->freq_min) || (uartclk > s->chip->freq_max)) { + dev_err(&pdev->dev, "Frequency out of bounds\n"); + ret = -EINVAL; + goto err_out; + } + + if (pdata) + memcpy(&s->pdata, pdata, sizeof(struct sccnxp_pdata)); + + if (s->pdata.poll_time_us) { + dev_info(&pdev->dev, "Using poll mode, resolution %u usecs\n", + s->pdata.poll_time_us); + s->poll = 1; + } + + if (!s->poll) { + s->irq = platform_get_irq(pdev, 0); + if (s->irq < 0) { + ret = -ENXIO; + goto err_out; + } + } + + s->uart.owner = THIS_MODULE; + s->uart.dev_name = "ttySC"; + s->uart.major = SCCNXP_MAJOR; + s->uart.minor = SCCNXP_MINOR; + s->uart.nr = s->chip->nr; +#ifdef CONFIG_SERIAL_SCCNXP_CONSOLE + s->uart.cons = &s->console; + s->uart.cons->device = uart_console_device; + s->uart.cons->write = sccnxp_console_write; + s->uart.cons->setup = sccnxp_console_setup; + s->uart.cons->flags = CON_PRINTBUFFER; + s->uart.cons->index = -1; + s->uart.cons->data = s; + strcpy(s->uart.cons->name, "ttySC"); +#endif + ret = uart_register_driver(&s->uart); + if (ret) { + dev_err(&pdev->dev, "Registering UART driver failed\n"); + goto err_out; + } + + for (i = 0; i < s->uart.nr; i++) { + s->port[i].line = i; + s->port[i].dev = &pdev->dev; + s->port[i].irq = s->irq; + s->port[i].type = PORT_SC26XX; + s->port[i].fifosize = s->chip->fifosize; + s->port[i].flags = UPF_SKIP_TEST | UPF_FIXED_TYPE; + s->port[i].iotype = UPIO_MEM; + s->port[i].mapbase = res->start; + s->port[i].membase = membase; + s->port[i].regshift = s->pdata.reg_shift; + s->port[i].uartclk = uartclk; + s->port[i].ops = &sccnxp_ops; + s->port[i].has_sysrq = IS_ENABLED(CONFIG_SERIAL_SCCNXP_CONSOLE); + uart_add_one_port(&s->uart, &s->port[i]); + /* Set direction to input */ + if (s->chip->flags & SCCNXP_HAVE_IO) + sccnxp_set_bit(&s->port[i], DIR_OP, 0); + } + + /* Disable interrupts */ + s->imr = 0; + sccnxp_write(&s->port[0], SCCNXP_IMR_REG, 0); + + if (!s->poll) { + ret = devm_request_threaded_irq(&pdev->dev, s->irq, NULL, + sccnxp_ist, + IRQF_TRIGGER_FALLING | + IRQF_ONESHOT, + dev_name(&pdev->dev), s); + if (!ret) + return 0; + + dev_err(&pdev->dev, "Unable to reguest IRQ %i\n", s->irq); + } else { + timer_setup(&s->timer, sccnxp_timer, 0); + mod_timer(&s->timer, jiffies + + usecs_to_jiffies(s->pdata.poll_time_us)); + return 0; + } + + uart_unregister_driver(&s->uart); +err_out: + if (!IS_ERR(s->regulator)) + regulator_disable(s->regulator); + + return ret; +} + +static int sccnxp_remove(struct platform_device *pdev) +{ + int i; + struct sccnxp_port *s = platform_get_drvdata(pdev); + + if (!s->poll) + devm_free_irq(&pdev->dev, s->irq, s); + else + del_timer_sync(&s->timer); + + for (i = 0; i < s->uart.nr; i++) + uart_remove_one_port(&s->uart, &s->port[i]); + + uart_unregister_driver(&s->uart); + + if (!IS_ERR(s->regulator)) + return regulator_disable(s->regulator); + + return 0; +} + +static struct platform_driver sccnxp_uart_driver = { + .driver = { + .name = SCCNXP_NAME, + }, + .probe = sccnxp_probe, + .remove = sccnxp_remove, + .id_table = sccnxp_id_table, +}; +module_platform_driver(sccnxp_uart_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Alexander Shiyan "); +MODULE_DESCRIPTION("SCCNXP serial driver"); diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c new file mode 100644 index 000000000..fac4d9004 --- /dev/null +++ b/drivers/tty/serial/serial-tegra.c @@ -0,0 +1,1720 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * serial_tegra.c + * + * High-speed serial driver for NVIDIA Tegra SoCs + * + * Copyright (c) 2012-2019, NVIDIA CORPORATION. All rights reserved. + * + * Author: Laxman Dewangan + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define TEGRA_UART_TYPE "TEGRA_UART" +#define TX_EMPTY_STATUS (UART_LSR_TEMT | UART_LSR_THRE) +#define BYTES_TO_ALIGN(x) ((unsigned long)(x) & 0x3) + +#define TEGRA_UART_RX_DMA_BUFFER_SIZE 4096 +#define TEGRA_UART_LSR_TXFIFO_FULL 0x100 +#define TEGRA_UART_IER_EORD 0x20 +#define TEGRA_UART_MCR_RTS_EN 0x40 +#define TEGRA_UART_MCR_CTS_EN 0x20 +#define TEGRA_UART_LSR_ANY (UART_LSR_OE | UART_LSR_BI | \ + UART_LSR_PE | UART_LSR_FE) +#define TEGRA_UART_IRDA_CSR 0x08 +#define TEGRA_UART_SIR_ENABLED 0x80 + +#define TEGRA_UART_TX_PIO 1 +#define TEGRA_UART_TX_DMA 2 +#define TEGRA_UART_MIN_DMA 16 +#define TEGRA_UART_FIFO_SIZE 32 + +/* + * Tx fifo trigger level setting in tegra uart is in + * reverse way then conventional uart. + */ +#define TEGRA_UART_TX_TRIG_16B 0x00 +#define TEGRA_UART_TX_TRIG_8B 0x10 +#define TEGRA_UART_TX_TRIG_4B 0x20 +#define TEGRA_UART_TX_TRIG_1B 0x30 + +#define TEGRA_UART_MAXIMUM 8 + +/* Default UART setting when started: 115200 no parity, stop, 8 data bits */ +#define TEGRA_UART_DEFAULT_BAUD 115200 +#define TEGRA_UART_DEFAULT_LSR UART_LCR_WLEN8 + +/* Tx transfer mode */ +#define TEGRA_TX_PIO 1 +#define TEGRA_TX_DMA 2 + +#define TEGRA_UART_FCR_IIR_FIFO_EN 0x40 + +/** + * tegra_uart_chip_data: SOC specific data. + * + * @tx_fifo_full_status: Status flag available for checking tx fifo full. + * @allow_txfifo_reset_fifo_mode: allow_tx fifo reset with fifo mode or not. + * Tegra30 does not allow this. + * @support_clk_src_div: Clock source support the clock divider. + */ +struct tegra_uart_chip_data { + bool tx_fifo_full_status; + bool allow_txfifo_reset_fifo_mode; + bool support_clk_src_div; + bool fifo_mode_enable_status; + int uart_max_port; + int max_dma_burst_bytes; + int error_tolerance_low_range; + int error_tolerance_high_range; +}; + +struct tegra_baud_tolerance { + u32 lower_range_baud; + u32 upper_range_baud; + s32 tolerance; +}; + +struct tegra_uart_port { + struct uart_port uport; + const struct tegra_uart_chip_data *cdata; + + struct clk *uart_clk; + struct reset_control *rst; + unsigned int current_baud; + + /* Register shadow */ + unsigned long fcr_shadow; + unsigned long mcr_shadow; + unsigned long lcr_shadow; + unsigned long ier_shadow; + bool rts_active; + + int tx_in_progress; + unsigned int tx_bytes; + + bool enable_modem_interrupt; + + bool rx_timeout; + int rx_in_progress; + int symb_bit; + + struct dma_chan *rx_dma_chan; + struct dma_chan *tx_dma_chan; + dma_addr_t rx_dma_buf_phys; + dma_addr_t tx_dma_buf_phys; + unsigned char *rx_dma_buf_virt; + unsigned char *tx_dma_buf_virt; + struct dma_async_tx_descriptor *tx_dma_desc; + struct dma_async_tx_descriptor *rx_dma_desc; + dma_cookie_t tx_cookie; + dma_cookie_t rx_cookie; + unsigned int tx_bytes_requested; + unsigned int rx_bytes_requested; + struct tegra_baud_tolerance *baud_tolerance; + int n_adjustable_baud_rates; + int required_rate; + int configured_rate; + bool use_rx_pio; + bool use_tx_pio; + bool rx_dma_active; +}; + +static void tegra_uart_start_next_tx(struct tegra_uart_port *tup); +static int tegra_uart_start_rx_dma(struct tegra_uart_port *tup); +static void tegra_uart_dma_channel_free(struct tegra_uart_port *tup, + bool dma_to_memory); + +static inline unsigned long tegra_uart_read(struct tegra_uart_port *tup, + unsigned long reg) +{ + return readl(tup->uport.membase + (reg << tup->uport.regshift)); +} + +static inline void tegra_uart_write(struct tegra_uart_port *tup, unsigned val, + unsigned long reg) +{ + writel(val, tup->uport.membase + (reg << tup->uport.regshift)); +} + +static inline struct tegra_uart_port *to_tegra_uport(struct uart_port *u) +{ + return container_of(u, struct tegra_uart_port, uport); +} + +static unsigned int tegra_uart_get_mctrl(struct uart_port *u) +{ + struct tegra_uart_port *tup = to_tegra_uport(u); + + /* + * RI - Ring detector is active + * CD/DCD/CAR - Carrier detect is always active. For some reason + * linux has different names for carrier detect. + * DSR - Data Set ready is active as the hardware doesn't support it. + * Don't know if the linux support this yet? + * CTS - Clear to send. Always set to active, as the hardware handles + * CTS automatically. + */ + if (tup->enable_modem_interrupt) + return TIOCM_RI | TIOCM_CD | TIOCM_DSR | TIOCM_CTS; + return TIOCM_CTS; +} + +static void set_rts(struct tegra_uart_port *tup, bool active) +{ + unsigned long mcr; + + mcr = tup->mcr_shadow; + if (active) + mcr |= TEGRA_UART_MCR_RTS_EN; + else + mcr &= ~TEGRA_UART_MCR_RTS_EN; + if (mcr != tup->mcr_shadow) { + tegra_uart_write(tup, mcr, UART_MCR); + tup->mcr_shadow = mcr; + } +} + +static void set_dtr(struct tegra_uart_port *tup, bool active) +{ + unsigned long mcr; + + mcr = tup->mcr_shadow; + if (active) + mcr |= UART_MCR_DTR; + else + mcr &= ~UART_MCR_DTR; + if (mcr != tup->mcr_shadow) { + tegra_uart_write(tup, mcr, UART_MCR); + tup->mcr_shadow = mcr; + } +} + +static void set_loopbk(struct tegra_uart_port *tup, bool active) +{ + unsigned long mcr = tup->mcr_shadow; + + if (active) + mcr |= UART_MCR_LOOP; + else + mcr &= ~UART_MCR_LOOP; + + if (mcr != tup->mcr_shadow) { + tegra_uart_write(tup, mcr, UART_MCR); + tup->mcr_shadow = mcr; + } +} + +static void tegra_uart_set_mctrl(struct uart_port *u, unsigned int mctrl) +{ + struct tegra_uart_port *tup = to_tegra_uport(u); + int enable; + + tup->rts_active = !!(mctrl & TIOCM_RTS); + set_rts(tup, tup->rts_active); + + enable = !!(mctrl & TIOCM_DTR); + set_dtr(tup, enable); + + enable = !!(mctrl & TIOCM_LOOP); + set_loopbk(tup, enable); +} + +static void tegra_uart_break_ctl(struct uart_port *u, int break_ctl) +{ + struct tegra_uart_port *tup = to_tegra_uport(u); + unsigned long lcr; + + lcr = tup->lcr_shadow; + if (break_ctl) + lcr |= UART_LCR_SBC; + else + lcr &= ~UART_LCR_SBC; + tegra_uart_write(tup, lcr, UART_LCR); + tup->lcr_shadow = lcr; +} + +/** + * tegra_uart_wait_cycle_time: Wait for N UART clock periods + * + * @tup: Tegra serial port data structure. + * @cycles: Number of clock periods to wait. + * + * Tegra UARTs are clocked at 16X the baud/bit rate and hence the UART + * clock speed is 16X the current baud rate. + */ +static void tegra_uart_wait_cycle_time(struct tegra_uart_port *tup, + unsigned int cycles) +{ + if (tup->current_baud) + udelay(DIV_ROUND_UP(cycles * 1000000, tup->current_baud * 16)); +} + +/* Wait for a symbol-time. */ +static void tegra_uart_wait_sym_time(struct tegra_uart_port *tup, + unsigned int syms) +{ + if (tup->current_baud) + udelay(DIV_ROUND_UP(syms * tup->symb_bit * 1000000, + tup->current_baud)); +} + +static int tegra_uart_wait_fifo_mode_enabled(struct tegra_uart_port *tup) +{ + unsigned long iir; + unsigned int tmout = 100; + + do { + iir = tegra_uart_read(tup, UART_IIR); + if (iir & TEGRA_UART_FCR_IIR_FIFO_EN) + return 0; + udelay(1); + } while (--tmout); + + return -ETIMEDOUT; +} + +static void tegra_uart_fifo_reset(struct tegra_uart_port *tup, u8 fcr_bits) +{ + unsigned long fcr = tup->fcr_shadow; + unsigned int lsr, tmout = 10000; + + if (tup->rts_active) + set_rts(tup, false); + + if (tup->cdata->allow_txfifo_reset_fifo_mode) { + fcr |= fcr_bits & (UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + tegra_uart_write(tup, fcr, UART_FCR); + } else { + fcr &= ~UART_FCR_ENABLE_FIFO; + tegra_uart_write(tup, fcr, UART_FCR); + udelay(60); + fcr |= fcr_bits & (UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + tegra_uart_write(tup, fcr, UART_FCR); + fcr |= UART_FCR_ENABLE_FIFO; + tegra_uart_write(tup, fcr, UART_FCR); + if (tup->cdata->fifo_mode_enable_status) + tegra_uart_wait_fifo_mode_enabled(tup); + } + + /* Dummy read to ensure the write is posted */ + tegra_uart_read(tup, UART_SCR); + + /* + * For all tegra devices (up to t210), there is a hardware issue that + * requires software to wait for 32 UART clock periods for the flush + * to propagate, otherwise data could be lost. + */ + tegra_uart_wait_cycle_time(tup, 32); + + do { + lsr = tegra_uart_read(tup, UART_LSR); + if ((lsr & UART_LSR_TEMT) && !(lsr & UART_LSR_DR)) + break; + udelay(1); + } while (--tmout); + + if (tup->rts_active) + set_rts(tup, true); +} + +static long tegra_get_tolerance_rate(struct tegra_uart_port *tup, + unsigned int baud, long rate) +{ + int i; + + for (i = 0; i < tup->n_adjustable_baud_rates; ++i) { + if (baud >= tup->baud_tolerance[i].lower_range_baud && + baud <= tup->baud_tolerance[i].upper_range_baud) + return (rate + (rate * + tup->baud_tolerance[i].tolerance) / 10000); + } + + return rate; +} + +static int tegra_check_rate_in_range(struct tegra_uart_port *tup) +{ + long diff; + + diff = ((long)(tup->configured_rate - tup->required_rate) * 10000) + / tup->required_rate; + if (diff < (tup->cdata->error_tolerance_low_range * 100) || + diff > (tup->cdata->error_tolerance_high_range * 100)) { + dev_err(tup->uport.dev, + "configured baud rate is out of range by %ld", diff); + return -EIO; + } + + return 0; +} + +static int tegra_set_baudrate(struct tegra_uart_port *tup, unsigned int baud) +{ + unsigned long rate; + unsigned int divisor; + unsigned long lcr; + unsigned long flags; + int ret; + + if (tup->current_baud == baud) + return 0; + + if (tup->cdata->support_clk_src_div) { + rate = baud * 16; + tup->required_rate = rate; + + if (tup->n_adjustable_baud_rates) + rate = tegra_get_tolerance_rate(tup, baud, rate); + + ret = clk_set_rate(tup->uart_clk, rate); + if (ret < 0) { + dev_err(tup->uport.dev, + "clk_set_rate() failed for rate %lu\n", rate); + return ret; + } + tup->configured_rate = clk_get_rate(tup->uart_clk); + divisor = 1; + ret = tegra_check_rate_in_range(tup); + if (ret < 0) + return ret; + } else { + rate = clk_get_rate(tup->uart_clk); + divisor = DIV_ROUND_CLOSEST(rate, baud * 16); + } + + spin_lock_irqsave(&tup->uport.lock, flags); + lcr = tup->lcr_shadow; + lcr |= UART_LCR_DLAB; + tegra_uart_write(tup, lcr, UART_LCR); + + tegra_uart_write(tup, divisor & 0xFF, UART_TX); + tegra_uart_write(tup, ((divisor >> 8) & 0xFF), UART_IER); + + lcr &= ~UART_LCR_DLAB; + tegra_uart_write(tup, lcr, UART_LCR); + + /* Dummy read to ensure the write is posted */ + tegra_uart_read(tup, UART_SCR); + spin_unlock_irqrestore(&tup->uport.lock, flags); + + tup->current_baud = baud; + + /* wait two character intervals at new rate */ + tegra_uart_wait_sym_time(tup, 2); + return 0; +} + +static char tegra_uart_decode_rx_error(struct tegra_uart_port *tup, + unsigned long lsr) +{ + char flag = TTY_NORMAL; + + if (unlikely(lsr & TEGRA_UART_LSR_ANY)) { + if (lsr & UART_LSR_OE) { + /* Overrrun error */ + flag = TTY_OVERRUN; + tup->uport.icount.overrun++; + dev_dbg(tup->uport.dev, "Got overrun errors\n"); + } else if (lsr & UART_LSR_PE) { + /* Parity error */ + flag = TTY_PARITY; + tup->uport.icount.parity++; + dev_dbg(tup->uport.dev, "Got Parity errors\n"); + } else if (lsr & UART_LSR_FE) { + flag = TTY_FRAME; + tup->uport.icount.frame++; + dev_dbg(tup->uport.dev, "Got frame errors\n"); + } else if (lsr & UART_LSR_BI) { + /* + * Break error + * If FIFO read error without any data, reset Rx FIFO + */ + if (!(lsr & UART_LSR_DR) && (lsr & UART_LSR_FIFOE)) + tegra_uart_fifo_reset(tup, UART_FCR_CLEAR_RCVR); + if (tup->uport.ignore_status_mask & UART_LSR_BI) + return TTY_BREAK; + flag = TTY_BREAK; + tup->uport.icount.brk++; + dev_dbg(tup->uport.dev, "Got Break\n"); + } + uart_insert_char(&tup->uport, lsr, UART_LSR_OE, 0, flag); + } + + return flag; +} + +static int tegra_uart_request_port(struct uart_port *u) +{ + return 0; +} + +static void tegra_uart_release_port(struct uart_port *u) +{ + /* Nothing to do here */ +} + +static void tegra_uart_fill_tx_fifo(struct tegra_uart_port *tup, int max_bytes) +{ + struct circ_buf *xmit = &tup->uport.state->xmit; + int i; + + for (i = 0; i < max_bytes; i++) { + BUG_ON(uart_circ_empty(xmit)); + if (tup->cdata->tx_fifo_full_status) { + unsigned long lsr = tegra_uart_read(tup, UART_LSR); + if ((lsr & TEGRA_UART_LSR_TXFIFO_FULL)) + break; + } + tegra_uart_write(tup, xmit->buf[xmit->tail], UART_TX); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + tup->uport.icount.tx++; + } +} + +static void tegra_uart_start_pio_tx(struct tegra_uart_port *tup, + unsigned int bytes) +{ + if (bytes > TEGRA_UART_MIN_DMA) + bytes = TEGRA_UART_MIN_DMA; + + tup->tx_in_progress = TEGRA_UART_TX_PIO; + tup->tx_bytes = bytes; + tup->ier_shadow |= UART_IER_THRI; + tegra_uart_write(tup, tup->ier_shadow, UART_IER); +} + +static void tegra_uart_tx_dma_complete(void *args) +{ + struct tegra_uart_port *tup = args; + struct circ_buf *xmit = &tup->uport.state->xmit; + struct dma_tx_state state; + unsigned long flags; + unsigned int count; + + dmaengine_tx_status(tup->tx_dma_chan, tup->tx_cookie, &state); + count = tup->tx_bytes_requested - state.residue; + async_tx_ack(tup->tx_dma_desc); + spin_lock_irqsave(&tup->uport.lock, flags); + uart_xmit_advance(&tup->uport, count); + tup->tx_in_progress = 0; + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&tup->uport); + tegra_uart_start_next_tx(tup); + spin_unlock_irqrestore(&tup->uport.lock, flags); +} + +static int tegra_uart_start_tx_dma(struct tegra_uart_port *tup, + unsigned long count) +{ + struct circ_buf *xmit = &tup->uport.state->xmit; + dma_addr_t tx_phys_addr; + + tup->tx_bytes = count & ~(0xF); + tx_phys_addr = tup->tx_dma_buf_phys + xmit->tail; + + dma_sync_single_for_device(tup->uport.dev, tx_phys_addr, + tup->tx_bytes, DMA_TO_DEVICE); + + tup->tx_dma_desc = dmaengine_prep_slave_single(tup->tx_dma_chan, + tx_phys_addr, tup->tx_bytes, DMA_MEM_TO_DEV, + DMA_PREP_INTERRUPT); + if (!tup->tx_dma_desc) { + dev_err(tup->uport.dev, "Not able to get desc for Tx\n"); + return -EIO; + } + + tup->tx_dma_desc->callback = tegra_uart_tx_dma_complete; + tup->tx_dma_desc->callback_param = tup; + tup->tx_in_progress = TEGRA_UART_TX_DMA; + tup->tx_bytes_requested = tup->tx_bytes; + tup->tx_cookie = dmaengine_submit(tup->tx_dma_desc); + dma_async_issue_pending(tup->tx_dma_chan); + return 0; +} + +static void tegra_uart_start_next_tx(struct tegra_uart_port *tup) +{ + unsigned long tail; + unsigned long count; + struct circ_buf *xmit = &tup->uport.state->xmit; + + if (!tup->current_baud) + return; + + tail = (unsigned long)&xmit->buf[xmit->tail]; + count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); + if (!count) + return; + + if (tup->use_tx_pio || count < TEGRA_UART_MIN_DMA) + tegra_uart_start_pio_tx(tup, count); + else if (BYTES_TO_ALIGN(tail) > 0) + tegra_uart_start_pio_tx(tup, BYTES_TO_ALIGN(tail)); + else + tegra_uart_start_tx_dma(tup, count); +} + +/* Called by serial core driver with u->lock taken. */ +static void tegra_uart_start_tx(struct uart_port *u) +{ + struct tegra_uart_port *tup = to_tegra_uport(u); + struct circ_buf *xmit = &u->state->xmit; + + if (!uart_circ_empty(xmit) && !tup->tx_in_progress) + tegra_uart_start_next_tx(tup); +} + +static unsigned int tegra_uart_tx_empty(struct uart_port *u) +{ + struct tegra_uart_port *tup = to_tegra_uport(u); + unsigned int ret = 0; + unsigned long flags; + + spin_lock_irqsave(&u->lock, flags); + if (!tup->tx_in_progress) { + unsigned long lsr = tegra_uart_read(tup, UART_LSR); + if ((lsr & TX_EMPTY_STATUS) == TX_EMPTY_STATUS) + ret = TIOCSER_TEMT; + } + spin_unlock_irqrestore(&u->lock, flags); + return ret; +} + +static void tegra_uart_stop_tx(struct uart_port *u) +{ + struct tegra_uart_port *tup = to_tegra_uport(u); + struct dma_tx_state state; + unsigned int count; + + if (tup->tx_in_progress != TEGRA_UART_TX_DMA) + return; + + dmaengine_pause(tup->tx_dma_chan); + dmaengine_tx_status(tup->tx_dma_chan, tup->tx_cookie, &state); + dmaengine_terminate_all(tup->tx_dma_chan); + count = tup->tx_bytes_requested - state.residue; + async_tx_ack(tup->tx_dma_desc); + uart_xmit_advance(&tup->uport, count); + tup->tx_in_progress = 0; +} + +static void tegra_uart_handle_tx_pio(struct tegra_uart_port *tup) +{ + struct circ_buf *xmit = &tup->uport.state->xmit; + + tegra_uart_fill_tx_fifo(tup, tup->tx_bytes); + tup->tx_in_progress = 0; + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&tup->uport); + tegra_uart_start_next_tx(tup); +} + +static void tegra_uart_handle_rx_pio(struct tegra_uart_port *tup, + struct tty_port *port) +{ + do { + char flag = TTY_NORMAL; + unsigned long lsr = 0; + unsigned char ch; + + lsr = tegra_uart_read(tup, UART_LSR); + if (!(lsr & UART_LSR_DR)) + break; + + flag = tegra_uart_decode_rx_error(tup, lsr); + if (flag != TTY_NORMAL) + continue; + + ch = (unsigned char) tegra_uart_read(tup, UART_RX); + tup->uport.icount.rx++; + + if (uart_handle_sysrq_char(&tup->uport, ch)) + continue; + + if (tup->uport.ignore_status_mask & UART_LSR_DR) + continue; + + tty_insert_flip_char(port, ch, flag); + } while (1); +} + +static void tegra_uart_copy_rx_to_tty(struct tegra_uart_port *tup, + struct tty_port *port, + unsigned int count) +{ + int copied; + + /* If count is zero, then there is no data to be copied */ + if (!count) + return; + + tup->uport.icount.rx += count; + + if (tup->uport.ignore_status_mask & UART_LSR_DR) + return; + + dma_sync_single_for_cpu(tup->uport.dev, tup->rx_dma_buf_phys, + count, DMA_FROM_DEVICE); + copied = tty_insert_flip_string(port, + ((unsigned char *)(tup->rx_dma_buf_virt)), count); + if (copied != count) { + WARN_ON(1); + dev_err(tup->uport.dev, "RxData copy to tty layer failed\n"); + } + dma_sync_single_for_device(tup->uport.dev, tup->rx_dma_buf_phys, + count, DMA_TO_DEVICE); +} + +static void do_handle_rx_pio(struct tegra_uart_port *tup) +{ + struct tty_struct *tty = tty_port_tty_get(&tup->uport.state->port); + struct tty_port *port = &tup->uport.state->port; + + tegra_uart_handle_rx_pio(tup, port); + if (tty) { + tty_flip_buffer_push(port); + tty_kref_put(tty); + } +} + +static void tegra_uart_rx_buffer_push(struct tegra_uart_port *tup, + unsigned int residue) +{ + struct tty_port *port = &tup->uport.state->port; + unsigned int count; + + async_tx_ack(tup->rx_dma_desc); + count = tup->rx_bytes_requested - residue; + + /* If we are here, DMA is stopped */ + tegra_uart_copy_rx_to_tty(tup, port, count); + + do_handle_rx_pio(tup); +} + +static void tegra_uart_rx_dma_complete(void *args) +{ + struct tegra_uart_port *tup = args; + struct uart_port *u = &tup->uport; + unsigned long flags; + struct dma_tx_state state; + enum dma_status status; + + spin_lock_irqsave(&u->lock, flags); + + status = dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state); + + if (status == DMA_IN_PROGRESS) { + dev_dbg(tup->uport.dev, "RX DMA is in progress\n"); + goto done; + } + + /* Deactivate flow control to stop sender */ + if (tup->rts_active) + set_rts(tup, false); + + tup->rx_dma_active = false; + tegra_uart_rx_buffer_push(tup, 0); + tegra_uart_start_rx_dma(tup); + + /* Activate flow control to start transfer */ + if (tup->rts_active) + set_rts(tup, true); + +done: + spin_unlock_irqrestore(&u->lock, flags); +} + +static void tegra_uart_terminate_rx_dma(struct tegra_uart_port *tup) +{ + struct dma_tx_state state; + + if (!tup->rx_dma_active) { + do_handle_rx_pio(tup); + return; + } + + dmaengine_pause(tup->rx_dma_chan); + dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state); + dmaengine_terminate_all(tup->rx_dma_chan); + + tegra_uart_rx_buffer_push(tup, state.residue); + tup->rx_dma_active = false; +} + +static void tegra_uart_handle_rx_dma(struct tegra_uart_port *tup) +{ + /* Deactivate flow control to stop sender */ + if (tup->rts_active) + set_rts(tup, false); + + tegra_uart_terminate_rx_dma(tup); + + if (tup->rts_active) + set_rts(tup, true); +} + +static int tegra_uart_start_rx_dma(struct tegra_uart_port *tup) +{ + unsigned int count = TEGRA_UART_RX_DMA_BUFFER_SIZE; + + if (tup->rx_dma_active) + return 0; + + tup->rx_dma_desc = dmaengine_prep_slave_single(tup->rx_dma_chan, + tup->rx_dma_buf_phys, count, DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT); + if (!tup->rx_dma_desc) { + dev_err(tup->uport.dev, "Not able to get desc for Rx\n"); + return -EIO; + } + + tup->rx_dma_active = true; + tup->rx_dma_desc->callback = tegra_uart_rx_dma_complete; + tup->rx_dma_desc->callback_param = tup; + tup->rx_bytes_requested = count; + tup->rx_cookie = dmaengine_submit(tup->rx_dma_desc); + dma_async_issue_pending(tup->rx_dma_chan); + return 0; +} + +static void tegra_uart_handle_modem_signal_change(struct uart_port *u) +{ + struct tegra_uart_port *tup = to_tegra_uport(u); + unsigned long msr; + + msr = tegra_uart_read(tup, UART_MSR); + if (!(msr & UART_MSR_ANY_DELTA)) + return; + + if (msr & UART_MSR_TERI) + tup->uport.icount.rng++; + if (msr & UART_MSR_DDSR) + tup->uport.icount.dsr++; + /* We may only get DDCD when HW init and reset */ + if (msr & UART_MSR_DDCD) + uart_handle_dcd_change(&tup->uport, msr & UART_MSR_DCD); + /* Will start/stop_tx accordingly */ + if (msr & UART_MSR_DCTS) + uart_handle_cts_change(&tup->uport, msr & UART_MSR_CTS); +} + +static irqreturn_t tegra_uart_isr(int irq, void *data) +{ + struct tegra_uart_port *tup = data; + struct uart_port *u = &tup->uport; + unsigned long iir; + unsigned long ier; + bool is_rx_start = false; + bool is_rx_int = false; + unsigned long flags; + + spin_lock_irqsave(&u->lock, flags); + while (1) { + iir = tegra_uart_read(tup, UART_IIR); + if (iir & UART_IIR_NO_INT) { + if (!tup->use_rx_pio && is_rx_int) { + tegra_uart_handle_rx_dma(tup); + if (tup->rx_in_progress) { + ier = tup->ier_shadow; + ier |= (UART_IER_RLSI | UART_IER_RTOIE | + TEGRA_UART_IER_EORD | UART_IER_RDI); + tup->ier_shadow = ier; + tegra_uart_write(tup, ier, UART_IER); + } + } else if (is_rx_start) { + tegra_uart_start_rx_dma(tup); + } + spin_unlock_irqrestore(&u->lock, flags); + return IRQ_HANDLED; + } + + switch ((iir >> 1) & 0x7) { + case 0: /* Modem signal change interrupt */ + tegra_uart_handle_modem_signal_change(u); + break; + + case 1: /* Transmit interrupt only triggered when using PIO */ + tup->ier_shadow &= ~UART_IER_THRI; + tegra_uart_write(tup, tup->ier_shadow, UART_IER); + tegra_uart_handle_tx_pio(tup); + break; + + case 4: /* End of data */ + case 6: /* Rx timeout */ + if (!tup->use_rx_pio) { + is_rx_int = tup->rx_in_progress; + /* Disable Rx interrupts */ + ier = tup->ier_shadow; + ier &= ~(UART_IER_RDI | UART_IER_RLSI | + UART_IER_RTOIE | TEGRA_UART_IER_EORD); + tup->ier_shadow = ier; + tegra_uart_write(tup, ier, UART_IER); + break; + } + fallthrough; + case 2: /* Receive */ + if (!tup->use_rx_pio) { + is_rx_start = tup->rx_in_progress; + tup->ier_shadow &= ~UART_IER_RDI; + tegra_uart_write(tup, tup->ier_shadow, + UART_IER); + } else { + do_handle_rx_pio(tup); + } + break; + + case 3: /* Receive error */ + tegra_uart_decode_rx_error(tup, + tegra_uart_read(tup, UART_LSR)); + break; + + case 5: /* break nothing to handle */ + case 7: /* break nothing to handle */ + break; + } + } +} + +static void tegra_uart_stop_rx(struct uart_port *u) +{ + struct tegra_uart_port *tup = to_tegra_uport(u); + struct tty_port *port = &tup->uport.state->port; + unsigned long ier; + + if (tup->rts_active) + set_rts(tup, false); + + if (!tup->rx_in_progress) + return; + + tegra_uart_wait_sym_time(tup, 1); /* wait one character interval */ + + ier = tup->ier_shadow; + ier &= ~(UART_IER_RDI | UART_IER_RLSI | UART_IER_RTOIE | + TEGRA_UART_IER_EORD); + tup->ier_shadow = ier; + tegra_uart_write(tup, ier, UART_IER); + tup->rx_in_progress = 0; + + if (!tup->use_rx_pio) + tegra_uart_terminate_rx_dma(tup); + else + tegra_uart_handle_rx_pio(tup, port); +} + +static void tegra_uart_hw_deinit(struct tegra_uart_port *tup) +{ + unsigned long flags; + unsigned long char_time = DIV_ROUND_UP(10000000, tup->current_baud); + unsigned long fifo_empty_time = tup->uport.fifosize * char_time; + unsigned long wait_time; + unsigned long lsr; + unsigned long msr; + unsigned long mcr; + + /* Disable interrupts */ + tegra_uart_write(tup, 0, UART_IER); + + lsr = tegra_uart_read(tup, UART_LSR); + if ((lsr & UART_LSR_TEMT) != UART_LSR_TEMT) { + msr = tegra_uart_read(tup, UART_MSR); + mcr = tegra_uart_read(tup, UART_MCR); + if ((mcr & TEGRA_UART_MCR_CTS_EN) && (msr & UART_MSR_CTS)) + dev_err(tup->uport.dev, + "Tx Fifo not empty, CTS disabled, waiting\n"); + + /* Wait for Tx fifo to be empty */ + while ((lsr & UART_LSR_TEMT) != UART_LSR_TEMT) { + wait_time = min(fifo_empty_time, 100lu); + udelay(wait_time); + fifo_empty_time -= wait_time; + if (!fifo_empty_time) { + msr = tegra_uart_read(tup, UART_MSR); + mcr = tegra_uart_read(tup, UART_MCR); + if ((mcr & TEGRA_UART_MCR_CTS_EN) && + (msr & UART_MSR_CTS)) + dev_err(tup->uport.dev, + "Slave not ready\n"); + break; + } + lsr = tegra_uart_read(tup, UART_LSR); + } + } + + spin_lock_irqsave(&tup->uport.lock, flags); + /* Reset the Rx and Tx FIFOs */ + tegra_uart_fifo_reset(tup, UART_FCR_CLEAR_XMIT | UART_FCR_CLEAR_RCVR); + tup->current_baud = 0; + spin_unlock_irqrestore(&tup->uport.lock, flags); + + tup->rx_in_progress = 0; + tup->tx_in_progress = 0; + + if (!tup->use_rx_pio) + tegra_uart_dma_channel_free(tup, true); + if (!tup->use_tx_pio) + tegra_uart_dma_channel_free(tup, false); + + clk_disable_unprepare(tup->uart_clk); +} + +static int tegra_uart_hw_init(struct tegra_uart_port *tup) +{ + int ret; + + tup->fcr_shadow = 0; + tup->mcr_shadow = 0; + tup->lcr_shadow = 0; + tup->ier_shadow = 0; + tup->current_baud = 0; + + ret = clk_prepare_enable(tup->uart_clk); + if (ret) { + dev_err(tup->uport.dev, "could not enable clk\n"); + return ret; + } + + /* Reset the UART controller to clear all previous status.*/ + reset_control_assert(tup->rst); + udelay(10); + reset_control_deassert(tup->rst); + + tup->rx_in_progress = 0; + tup->tx_in_progress = 0; + + /* + * Set the trigger level + * + * For PIO mode: + * + * For receive, this will interrupt the CPU after that many number of + * bytes are received, for the remaining bytes the receive timeout + * interrupt is received. Rx high watermark is set to 4. + * + * For transmit, if the trasnmit interrupt is enabled, this will + * interrupt the CPU when the number of entries in the FIFO reaches the + * low watermark. Tx low watermark is set to 16 bytes. + * + * For DMA mode: + * + * Set the Tx trigger to 16. This should match the DMA burst size that + * programmed in the DMA registers. + */ + tup->fcr_shadow = UART_FCR_ENABLE_FIFO; + + if (tup->use_rx_pio) { + tup->fcr_shadow |= UART_FCR_R_TRIG_11; + } else { + if (tup->cdata->max_dma_burst_bytes == 8) + tup->fcr_shadow |= UART_FCR_R_TRIG_10; + else + tup->fcr_shadow |= UART_FCR_R_TRIG_01; + } + + tup->fcr_shadow |= TEGRA_UART_TX_TRIG_16B; + tegra_uart_write(tup, tup->fcr_shadow, UART_FCR); + + /* Dummy read to ensure the write is posted */ + tegra_uart_read(tup, UART_SCR); + + if (tup->cdata->fifo_mode_enable_status) { + ret = tegra_uart_wait_fifo_mode_enabled(tup); + if (ret < 0) { + dev_err(tup->uport.dev, + "Failed to enable FIFO mode: %d\n", ret); + return ret; + } + } else { + /* + * For all tegra devices (up to t210), there is a hardware + * issue that requires software to wait for 3 UART clock + * periods after enabling the TX fifo, otherwise data could + * be lost. + */ + tegra_uart_wait_cycle_time(tup, 3); + } + + /* + * Initialize the UART with default configuration + * (115200, N, 8, 1) so that the receive DMA buffer may be + * enqueued + */ + ret = tegra_set_baudrate(tup, TEGRA_UART_DEFAULT_BAUD); + if (ret < 0) { + dev_err(tup->uport.dev, "Failed to set baud rate\n"); + return ret; + } + if (!tup->use_rx_pio) { + tup->lcr_shadow = TEGRA_UART_DEFAULT_LSR; + tup->fcr_shadow |= UART_FCR_DMA_SELECT; + tegra_uart_write(tup, tup->fcr_shadow, UART_FCR); + } else { + tegra_uart_write(tup, tup->fcr_shadow, UART_FCR); + } + tup->rx_in_progress = 1; + + /* + * Enable IE_RXS for the receive status interrupts like line errros. + * Enable IE_RX_TIMEOUT to get the bytes which cannot be DMA'd. + * + * EORD is different interrupt than RX_TIMEOUT - RX_TIMEOUT occurs when + * the DATA is sitting in the FIFO and couldn't be transferred to the + * DMA as the DMA size alignment (4 bytes) is not met. EORD will be + * triggered when there is a pause of the incomming data stream for 4 + * characters long. + * + * For pauses in the data which is not aligned to 4 bytes, we get + * both the EORD as well as RX_TIMEOUT - SW sees RX_TIMEOUT first + * then the EORD. + */ + tup->ier_shadow = UART_IER_RLSI | UART_IER_RTOIE | UART_IER_RDI; + + /* + * If using DMA mode, enable EORD interrupt to notify about RX + * completion. + */ + if (!tup->use_rx_pio) + tup->ier_shadow |= TEGRA_UART_IER_EORD; + + tegra_uart_write(tup, tup->ier_shadow, UART_IER); + return 0; +} + +static void tegra_uart_dma_channel_free(struct tegra_uart_port *tup, + bool dma_to_memory) +{ + if (dma_to_memory) { + dmaengine_terminate_all(tup->rx_dma_chan); + dma_release_channel(tup->rx_dma_chan); + dma_free_coherent(tup->uport.dev, TEGRA_UART_RX_DMA_BUFFER_SIZE, + tup->rx_dma_buf_virt, tup->rx_dma_buf_phys); + tup->rx_dma_chan = NULL; + tup->rx_dma_buf_phys = 0; + tup->rx_dma_buf_virt = NULL; + } else { + dmaengine_terminate_all(tup->tx_dma_chan); + dma_release_channel(tup->tx_dma_chan); + dma_unmap_single(tup->uport.dev, tup->tx_dma_buf_phys, + UART_XMIT_SIZE, DMA_TO_DEVICE); + tup->tx_dma_chan = NULL; + tup->tx_dma_buf_phys = 0; + tup->tx_dma_buf_virt = NULL; + } +} + +static int tegra_uart_dma_channel_allocate(struct tegra_uart_port *tup, + bool dma_to_memory) +{ + struct dma_chan *dma_chan; + unsigned char *dma_buf; + dma_addr_t dma_phys; + int ret; + struct dma_slave_config dma_sconfig; + + dma_chan = dma_request_chan(tup->uport.dev, dma_to_memory ? "rx" : "tx"); + if (IS_ERR(dma_chan)) { + ret = PTR_ERR(dma_chan); + dev_err(tup->uport.dev, + "DMA channel alloc failed: %d\n", ret); + return ret; + } + + if (dma_to_memory) { + dma_buf = dma_alloc_coherent(tup->uport.dev, + TEGRA_UART_RX_DMA_BUFFER_SIZE, + &dma_phys, GFP_KERNEL); + if (!dma_buf) { + dev_err(tup->uport.dev, + "Not able to allocate the dma buffer\n"); + dma_release_channel(dma_chan); + return -ENOMEM; + } + dma_sync_single_for_device(tup->uport.dev, dma_phys, + TEGRA_UART_RX_DMA_BUFFER_SIZE, + DMA_TO_DEVICE); + dma_sconfig.src_addr = tup->uport.mapbase; + dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + dma_sconfig.src_maxburst = tup->cdata->max_dma_burst_bytes; + tup->rx_dma_chan = dma_chan; + tup->rx_dma_buf_virt = dma_buf; + tup->rx_dma_buf_phys = dma_phys; + } else { + dma_phys = dma_map_single(tup->uport.dev, + tup->uport.state->xmit.buf, UART_XMIT_SIZE, + DMA_TO_DEVICE); + if (dma_mapping_error(tup->uport.dev, dma_phys)) { + dev_err(tup->uport.dev, "dma_map_single tx failed\n"); + dma_release_channel(dma_chan); + return -ENOMEM; + } + dma_buf = tup->uport.state->xmit.buf; + dma_sconfig.dst_addr = tup->uport.mapbase; + dma_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + dma_sconfig.dst_maxburst = 16; + tup->tx_dma_chan = dma_chan; + tup->tx_dma_buf_virt = dma_buf; + tup->tx_dma_buf_phys = dma_phys; + } + + ret = dmaengine_slave_config(dma_chan, &dma_sconfig); + if (ret < 0) { + dev_err(tup->uport.dev, + "Dma slave config failed, err = %d\n", ret); + tegra_uart_dma_channel_free(tup, dma_to_memory); + return ret; + } + + return 0; +} + +static int tegra_uart_startup(struct uart_port *u) +{ + struct tegra_uart_port *tup = to_tegra_uport(u); + int ret; + + if (!tup->use_tx_pio) { + ret = tegra_uart_dma_channel_allocate(tup, false); + if (ret < 0) { + dev_err(u->dev, "Tx Dma allocation failed, err = %d\n", + ret); + return ret; + } + } + + if (!tup->use_rx_pio) { + ret = tegra_uart_dma_channel_allocate(tup, true); + if (ret < 0) { + dev_err(u->dev, "Rx Dma allocation failed, err = %d\n", + ret); + goto fail_rx_dma; + } + } + + ret = tegra_uart_hw_init(tup); + if (ret < 0) { + dev_err(u->dev, "Uart HW init failed, err = %d\n", ret); + goto fail_hw_init; + } + + ret = request_irq(u->irq, tegra_uart_isr, 0, + dev_name(u->dev), tup); + if (ret < 0) { + dev_err(u->dev, "Failed to register ISR for IRQ %d\n", u->irq); + goto fail_hw_init; + } + return 0; + +fail_hw_init: + if (!tup->use_rx_pio) + tegra_uart_dma_channel_free(tup, true); +fail_rx_dma: + if (!tup->use_tx_pio) + tegra_uart_dma_channel_free(tup, false); + return ret; +} + +/* + * Flush any TX data submitted for DMA and PIO. Called when the + * TX circular buffer is reset. + */ +static void tegra_uart_flush_buffer(struct uart_port *u) +{ + struct tegra_uart_port *tup = to_tegra_uport(u); + + tup->tx_bytes = 0; + if (tup->tx_dma_chan) + dmaengine_terminate_all(tup->tx_dma_chan); +} + +static void tegra_uart_shutdown(struct uart_port *u) +{ + struct tegra_uart_port *tup = to_tegra_uport(u); + + tegra_uart_hw_deinit(tup); + free_irq(u->irq, tup); +} + +static void tegra_uart_enable_ms(struct uart_port *u) +{ + struct tegra_uart_port *tup = to_tegra_uport(u); + + if (tup->enable_modem_interrupt) { + tup->ier_shadow |= UART_IER_MSI; + tegra_uart_write(tup, tup->ier_shadow, UART_IER); + } +} + +static void tegra_uart_set_termios(struct uart_port *u, + struct ktermios *termios, struct ktermios *oldtermios) +{ + struct tegra_uart_port *tup = to_tegra_uport(u); + unsigned int baud; + unsigned long flags; + unsigned int lcr; + int symb_bit = 1; + struct clk *parent_clk = clk_get_parent(tup->uart_clk); + unsigned long parent_clk_rate = clk_get_rate(parent_clk); + int max_divider = (tup->cdata->support_clk_src_div) ? 0x7FFF : 0xFFFF; + int ret; + + max_divider *= 16; + spin_lock_irqsave(&u->lock, flags); + + /* Changing configuration, it is safe to stop any rx now */ + if (tup->rts_active) + set_rts(tup, false); + + /* Clear all interrupts as configuration is going to be changed */ + tegra_uart_write(tup, tup->ier_shadow | UART_IER_RDI, UART_IER); + tegra_uart_read(tup, UART_IER); + tegra_uart_write(tup, 0, UART_IER); + tegra_uart_read(tup, UART_IER); + + /* Parity */ + lcr = tup->lcr_shadow; + lcr &= ~UART_LCR_PARITY; + + /* CMSPAR isn't supported by this driver */ + termios->c_cflag &= ~CMSPAR; + + if ((termios->c_cflag & PARENB) == PARENB) { + symb_bit++; + if (termios->c_cflag & PARODD) { + lcr |= UART_LCR_PARITY; + lcr &= ~UART_LCR_EPAR; + lcr &= ~UART_LCR_SPAR; + } else { + lcr |= UART_LCR_PARITY; + lcr |= UART_LCR_EPAR; + lcr &= ~UART_LCR_SPAR; + } + } + + lcr &= ~UART_LCR_WLEN8; + switch (termios->c_cflag & CSIZE) { + case CS5: + lcr |= UART_LCR_WLEN5; + symb_bit += 5; + break; + case CS6: + lcr |= UART_LCR_WLEN6; + symb_bit += 6; + break; + case CS7: + lcr |= UART_LCR_WLEN7; + symb_bit += 7; + break; + default: + lcr |= UART_LCR_WLEN8; + symb_bit += 8; + break; + } + + /* Stop bits */ + if (termios->c_cflag & CSTOPB) { + lcr |= UART_LCR_STOP; + symb_bit += 2; + } else { + lcr &= ~UART_LCR_STOP; + symb_bit++; + } + + tegra_uart_write(tup, lcr, UART_LCR); + tup->lcr_shadow = lcr; + tup->symb_bit = symb_bit; + + /* Baud rate. */ + baud = uart_get_baud_rate(u, termios, oldtermios, + parent_clk_rate/max_divider, + parent_clk_rate/16); + spin_unlock_irqrestore(&u->lock, flags); + ret = tegra_set_baudrate(tup, baud); + if (ret < 0) { + dev_err(tup->uport.dev, "Failed to set baud rate\n"); + return; + } + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, baud, baud); + spin_lock_irqsave(&u->lock, flags); + + /* Flow control */ + if (termios->c_cflag & CRTSCTS) { + tup->mcr_shadow |= TEGRA_UART_MCR_CTS_EN; + tup->mcr_shadow &= ~TEGRA_UART_MCR_RTS_EN; + tegra_uart_write(tup, tup->mcr_shadow, UART_MCR); + /* if top layer has asked to set rts active then do so here */ + if (tup->rts_active) + set_rts(tup, true); + } else { + tup->mcr_shadow &= ~TEGRA_UART_MCR_CTS_EN; + tup->mcr_shadow &= ~TEGRA_UART_MCR_RTS_EN; + tegra_uart_write(tup, tup->mcr_shadow, UART_MCR); + } + + /* update the port timeout based on new settings */ + uart_update_timeout(u, termios->c_cflag, baud); + + /* Make sure all writes have completed */ + tegra_uart_read(tup, UART_IER); + + /* Re-enable interrupt */ + tegra_uart_write(tup, tup->ier_shadow, UART_IER); + tegra_uart_read(tup, UART_IER); + + tup->uport.ignore_status_mask = 0; + /* Ignore all characters if CREAD is not set */ + if ((termios->c_cflag & CREAD) == 0) + tup->uport.ignore_status_mask |= UART_LSR_DR; + if (termios->c_iflag & IGNBRK) + tup->uport.ignore_status_mask |= UART_LSR_BI; + + spin_unlock_irqrestore(&u->lock, flags); +} + +static const char *tegra_uart_type(struct uart_port *u) +{ + return TEGRA_UART_TYPE; +} + +static const struct uart_ops tegra_uart_ops = { + .tx_empty = tegra_uart_tx_empty, + .set_mctrl = tegra_uart_set_mctrl, + .get_mctrl = tegra_uart_get_mctrl, + .stop_tx = tegra_uart_stop_tx, + .start_tx = tegra_uart_start_tx, + .stop_rx = tegra_uart_stop_rx, + .flush_buffer = tegra_uart_flush_buffer, + .enable_ms = tegra_uart_enable_ms, + .break_ctl = tegra_uart_break_ctl, + .startup = tegra_uart_startup, + .shutdown = tegra_uart_shutdown, + .set_termios = tegra_uart_set_termios, + .type = tegra_uart_type, + .request_port = tegra_uart_request_port, + .release_port = tegra_uart_release_port, +}; + +static struct uart_driver tegra_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "tegra_hsuart", + .dev_name = "ttyTHS", + .cons = NULL, + .nr = TEGRA_UART_MAXIMUM, +}; + +static int tegra_uart_parse_dt(struct platform_device *pdev, + struct tegra_uart_port *tup) +{ + struct device_node *np = pdev->dev.of_node; + int port; + int ret; + int index; + u32 pval; + int count; + int n_entries; + + port = of_alias_get_id(np, "serial"); + if (port < 0) { + dev_err(&pdev->dev, "failed to get alias id, errno %d\n", port); + return port; + } + tup->uport.line = port; + + tup->enable_modem_interrupt = of_property_read_bool(np, + "nvidia,enable-modem-interrupt"); + + index = of_property_match_string(np, "dma-names", "rx"); + if (index < 0) { + tup->use_rx_pio = true; + dev_info(&pdev->dev, "RX in PIO mode\n"); + } + index = of_property_match_string(np, "dma-names", "tx"); + if (index < 0) { + tup->use_tx_pio = true; + dev_info(&pdev->dev, "TX in PIO mode\n"); + } + + n_entries = of_property_count_u32_elems(np, "nvidia,adjust-baud-rates"); + if (n_entries > 0) { + tup->n_adjustable_baud_rates = n_entries / 3; + tup->baud_tolerance = + devm_kzalloc(&pdev->dev, (tup->n_adjustable_baud_rates) * + sizeof(*tup->baud_tolerance), GFP_KERNEL); + if (!tup->baud_tolerance) + return -ENOMEM; + for (count = 0, index = 0; count < n_entries; count += 3, + index++) { + ret = + of_property_read_u32_index(np, + "nvidia,adjust-baud-rates", + count, &pval); + if (!ret) + tup->baud_tolerance[index].lower_range_baud = + pval; + ret = + of_property_read_u32_index(np, + "nvidia,adjust-baud-rates", + count + 1, &pval); + if (!ret) + tup->baud_tolerance[index].upper_range_baud = + pval; + ret = + of_property_read_u32_index(np, + "nvidia,adjust-baud-rates", + count + 2, &pval); + if (!ret) + tup->baud_tolerance[index].tolerance = + (s32)pval; + } + } else { + tup->n_adjustable_baud_rates = 0; + } + + return 0; +} + +static struct tegra_uart_chip_data tegra20_uart_chip_data = { + .tx_fifo_full_status = false, + .allow_txfifo_reset_fifo_mode = true, + .support_clk_src_div = false, + .fifo_mode_enable_status = false, + .uart_max_port = 5, + .max_dma_burst_bytes = 4, + .error_tolerance_low_range = -4, + .error_tolerance_high_range = 4, +}; + +static struct tegra_uart_chip_data tegra30_uart_chip_data = { + .tx_fifo_full_status = true, + .allow_txfifo_reset_fifo_mode = false, + .support_clk_src_div = true, + .fifo_mode_enable_status = false, + .uart_max_port = 5, + .max_dma_burst_bytes = 4, + .error_tolerance_low_range = -4, + .error_tolerance_high_range = 4, +}; + +static struct tegra_uart_chip_data tegra186_uart_chip_data = { + .tx_fifo_full_status = true, + .allow_txfifo_reset_fifo_mode = false, + .support_clk_src_div = true, + .fifo_mode_enable_status = true, + .uart_max_port = 8, + .max_dma_burst_bytes = 8, + .error_tolerance_low_range = 0, + .error_tolerance_high_range = 4, +}; + +static struct tegra_uart_chip_data tegra194_uart_chip_data = { + .tx_fifo_full_status = true, + .allow_txfifo_reset_fifo_mode = false, + .support_clk_src_div = true, + .fifo_mode_enable_status = true, + .uart_max_port = 8, + .max_dma_burst_bytes = 8, + .error_tolerance_low_range = -2, + .error_tolerance_high_range = 2, +}; + +static const struct of_device_id tegra_uart_of_match[] = { + { + .compatible = "nvidia,tegra30-hsuart", + .data = &tegra30_uart_chip_data, + }, { + .compatible = "nvidia,tegra20-hsuart", + .data = &tegra20_uart_chip_data, + }, { + .compatible = "nvidia,tegra186-hsuart", + .data = &tegra186_uart_chip_data, + }, { + .compatible = "nvidia,tegra194-hsuart", + .data = &tegra194_uart_chip_data, + }, { + }, +}; +MODULE_DEVICE_TABLE(of, tegra_uart_of_match); + +static int tegra_uart_probe(struct platform_device *pdev) +{ + struct tegra_uart_port *tup; + struct uart_port *u; + struct resource *resource; + int ret; + const struct tegra_uart_chip_data *cdata; + const struct of_device_id *match; + + match = of_match_device(tegra_uart_of_match, &pdev->dev); + if (!match) { + dev_err(&pdev->dev, "Error: No device match found\n"); + return -ENODEV; + } + cdata = match->data; + + tup = devm_kzalloc(&pdev->dev, sizeof(*tup), GFP_KERNEL); + if (!tup) { + dev_err(&pdev->dev, "Failed to allocate memory for tup\n"); + return -ENOMEM; + } + + ret = tegra_uart_parse_dt(pdev, tup); + if (ret < 0) + return ret; + + u = &tup->uport; + u->dev = &pdev->dev; + u->ops = &tegra_uart_ops; + u->type = PORT_TEGRA; + u->fifosize = 32; + tup->cdata = cdata; + + platform_set_drvdata(pdev, tup); + resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!resource) { + dev_err(&pdev->dev, "No IO memory resource\n"); + return -ENODEV; + } + + u->mapbase = resource->start; + u->membase = devm_ioremap_resource(&pdev->dev, resource); + if (IS_ERR(u->membase)) + return PTR_ERR(u->membase); + + tup->uart_clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(tup->uart_clk)) { + dev_err(&pdev->dev, "Couldn't get the clock\n"); + return PTR_ERR(tup->uart_clk); + } + + tup->rst = devm_reset_control_get_exclusive(&pdev->dev, "serial"); + if (IS_ERR(tup->rst)) { + dev_err(&pdev->dev, "Couldn't get the reset\n"); + return PTR_ERR(tup->rst); + } + + u->iotype = UPIO_MEM32; + ret = platform_get_irq(pdev, 0); + if (ret < 0) + return ret; + u->irq = ret; + u->regshift = 2; + ret = uart_add_one_port(&tegra_uart_driver, u); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to add uart port, err %d\n", ret); + return ret; + } + return ret; +} + +static int tegra_uart_remove(struct platform_device *pdev) +{ + struct tegra_uart_port *tup = platform_get_drvdata(pdev); + struct uart_port *u = &tup->uport; + + uart_remove_one_port(&tegra_uart_driver, u); + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int tegra_uart_suspend(struct device *dev) +{ + struct tegra_uart_port *tup = dev_get_drvdata(dev); + struct uart_port *u = &tup->uport; + + return uart_suspend_port(&tegra_uart_driver, u); +} + +static int tegra_uart_resume(struct device *dev) +{ + struct tegra_uart_port *tup = dev_get_drvdata(dev); + struct uart_port *u = &tup->uport; + + return uart_resume_port(&tegra_uart_driver, u); +} +#endif + +static const struct dev_pm_ops tegra_uart_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(tegra_uart_suspend, tegra_uart_resume) +}; + +static struct platform_driver tegra_uart_platform_driver = { + .probe = tegra_uart_probe, + .remove = tegra_uart_remove, + .driver = { + .name = "serial-tegra", + .of_match_table = tegra_uart_of_match, + .pm = &tegra_uart_pm_ops, + }, +}; + +static int __init tegra_uart_init(void) +{ + int ret; + struct device_node *node; + const struct of_device_id *match = NULL; + const struct tegra_uart_chip_data *cdata = NULL; + + node = of_find_matching_node(NULL, tegra_uart_of_match); + if (node) + match = of_match_node(tegra_uart_of_match, node); + if (match) + cdata = match->data; + if (cdata) + tegra_uart_driver.nr = cdata->uart_max_port; + + ret = uart_register_driver(&tegra_uart_driver); + if (ret < 0) { + pr_err("Could not register %s driver\n", + tegra_uart_driver.driver_name); + return ret; + } + + ret = platform_driver_register(&tegra_uart_platform_driver); + if (ret < 0) { + pr_err("Uart platform driver register failed, e = %d\n", ret); + uart_unregister_driver(&tegra_uart_driver); + return ret; + } + return 0; +} + +static void __exit tegra_uart_exit(void) +{ + pr_info("Unloading tegra uart driver\n"); + platform_driver_unregister(&tegra_uart_platform_driver); + uart_unregister_driver(&tegra_uart_driver); +} + +module_init(tegra_uart_init); +module_exit(tegra_uart_exit); + +MODULE_ALIAS("platform:serial-tegra"); +MODULE_DESCRIPTION("High speed UART driver for tegra chipset"); +MODULE_AUTHOR("Laxman Dewangan "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c new file mode 100644 index 000000000..40fff3858 --- /dev/null +++ b/drivers/tty/serial/serial_core.c @@ -0,0 +1,3343 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver core for serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright 1999 ARM Limited + * Copyright (C) 2000-2001 Deep Blue Solutions Ltd. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include /* for serial_state and serial_icounter_struct */ +#include +#include +#include +#include +#include + +#include +#include + +/* + * This is used to lock changes in serial line configuration. + */ +static DEFINE_MUTEX(port_mutex); + +/* + * lockdep: port->lock is initialized in two places, but we + * want only one lock-class: + */ +static struct lock_class_key port_lock_key; + +#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8) + +/* + * Max time with active RTS before/after data is sent. + */ +#define RS485_MAX_RTS_DELAY 100 /* msecs */ + +static void uart_change_speed(struct tty_struct *tty, struct uart_state *state, + struct ktermios *old_termios); +static void uart_wait_until_sent(struct tty_struct *tty, int timeout); +static void uart_change_pm(struct uart_state *state, + enum uart_pm_state pm_state); + +static void uart_port_shutdown(struct tty_port *port); + +static int uart_dcd_enabled(struct uart_port *uport) +{ + return !!(uport->status & UPSTAT_DCD_ENABLE); +} + +static inline struct uart_port *uart_port_ref(struct uart_state *state) +{ + if (atomic_add_unless(&state->refcount, 1, 0)) + return state->uart_port; + return NULL; +} + +static inline void uart_port_deref(struct uart_port *uport) +{ + if (atomic_dec_and_test(&uport->state->refcount)) + wake_up(&uport->state->remove_wait); +} + +#define uart_port_lock(state, flags) \ + ({ \ + struct uart_port *__uport = uart_port_ref(state); \ + if (__uport) \ + spin_lock_irqsave(&__uport->lock, flags); \ + __uport; \ + }) + +#define uart_port_unlock(uport, flags) \ + ({ \ + struct uart_port *__uport = uport; \ + if (__uport) { \ + spin_unlock_irqrestore(&__uport->lock, flags); \ + uart_port_deref(__uport); \ + } \ + }) + +static inline struct uart_port *uart_port_check(struct uart_state *state) +{ + lockdep_assert_held(&state->port.mutex); + return state->uart_port; +} + +/* + * This routine is used by the interrupt handler to schedule processing in + * the software interrupt portion of the driver. + */ +void uart_write_wakeup(struct uart_port *port) +{ + struct uart_state *state = port->state; + /* + * This means you called this function _after_ the port was + * closed. No cookie for you. + */ + BUG_ON(!state); + tty_port_tty_wakeup(&state->port); +} + +static void uart_stop(struct tty_struct *tty) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port; + unsigned long flags; + + port = uart_port_lock(state, flags); + if (port) + port->ops->stop_tx(port); + uart_port_unlock(port, flags); +} + +static void __uart_start(struct tty_struct *tty) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port = state->uart_port; + + if (port && !uart_tx_stopped(port)) + port->ops->start_tx(port); +} + +static void uart_start(struct tty_struct *tty) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port; + unsigned long flags; + + port = uart_port_lock(state, flags); + __uart_start(tty); + uart_port_unlock(port, flags); +} + +static void +uart_update_mctrl(struct uart_port *port, unsigned int set, unsigned int clear) +{ + unsigned long flags; + unsigned int old; + + spin_lock_irqsave(&port->lock, flags); + old = port->mctrl; + port->mctrl = (old & ~clear) | set; + if (old != port->mctrl && !(port->rs485.flags & SER_RS485_ENABLED)) + port->ops->set_mctrl(port, port->mctrl); + spin_unlock_irqrestore(&port->lock, flags); +} + +#define uart_set_mctrl(port, set) uart_update_mctrl(port, set, 0) +#define uart_clear_mctrl(port, clear) uart_update_mctrl(port, 0, clear) + +static void uart_port_dtr_rts(struct uart_port *uport, int raise) +{ + if (raise) + uart_set_mctrl(uport, TIOCM_DTR | TIOCM_RTS); + else + uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS); +} + +/* + * Startup the port. This will be called once per open. All calls + * will be serialised by the per-port mutex. + */ +static int uart_port_startup(struct tty_struct *tty, struct uart_state *state, + int init_hw) +{ + struct uart_port *uport = uart_port_check(state); + unsigned long page; + unsigned long flags = 0; + int retval = 0; + + if (uport->type == PORT_UNKNOWN) + return 1; + + /* + * Make sure the device is in D0 state. + */ + uart_change_pm(state, UART_PM_STATE_ON); + + /* + * Initialise and allocate the transmit and temporary + * buffer. + */ + page = get_zeroed_page(GFP_KERNEL); + if (!page) + return -ENOMEM; + + uart_port_lock(state, flags); + if (!state->xmit.buf) { + state->xmit.buf = (unsigned char *) page; + uart_circ_clear(&state->xmit); + uart_port_unlock(uport, flags); + } else { + uart_port_unlock(uport, flags); + /* + * Do not free() the page under the port lock, see + * uart_shutdown(). + */ + free_page(page); + } + + retval = uport->ops->startup(uport); + if (retval == 0) { + if (uart_console(uport) && uport->cons->cflag) { + tty->termios.c_cflag = uport->cons->cflag; + tty->termios.c_ispeed = uport->cons->ispeed; + tty->termios.c_ospeed = uport->cons->ospeed; + uport->cons->cflag = 0; + uport->cons->ispeed = 0; + uport->cons->ospeed = 0; + } + /* + * Initialise the hardware port settings. + */ + uart_change_speed(tty, state, NULL); + + /* + * Setup the RTS and DTR signals once the + * port is open and ready to respond. + */ + if (init_hw && C_BAUD(tty)) + uart_port_dtr_rts(uport, 1); + } + + /* + * This is to allow setserial on this port. People may want to set + * port/irq/type and then reconfigure the port properly if it failed + * now. + */ + if (retval && capable(CAP_SYS_ADMIN)) + return 1; + + return retval; +} + +static int uart_startup(struct tty_struct *tty, struct uart_state *state, + int init_hw) +{ + struct tty_port *port = &state->port; + int retval; + + if (tty_port_initialized(port)) + return 0; + + retval = uart_port_startup(tty, state, init_hw); + if (retval) + set_bit(TTY_IO_ERROR, &tty->flags); + + return retval; +} + +/* + * This routine will shutdown a serial port; interrupts are disabled, and + * DTR is dropped if the hangup on close termio flag is on. Calls to + * uart_shutdown are serialised by the per-port semaphore. + * + * uport == NULL if uart_port has already been removed + */ +static void uart_shutdown(struct tty_struct *tty, struct uart_state *state) +{ + struct uart_port *uport = uart_port_check(state); + struct tty_port *port = &state->port; + unsigned long flags = 0; + char *xmit_buf = NULL; + + /* + * Set the TTY IO error marker + */ + if (tty) + set_bit(TTY_IO_ERROR, &tty->flags); + + if (tty_port_initialized(port)) { + tty_port_set_initialized(port, 0); + + /* + * Turn off DTR and RTS early. + */ + if (uport && uart_console(uport) && tty) { + uport->cons->cflag = tty->termios.c_cflag; + uport->cons->ispeed = tty->termios.c_ispeed; + uport->cons->ospeed = tty->termios.c_ospeed; + } + + if (!tty || C_HUPCL(tty)) + uart_port_dtr_rts(uport, 0); + + uart_port_shutdown(port); + } + + /* + * It's possible for shutdown to be called after suspend if we get + * a DCD drop (hangup) at just the right time. Clear suspended bit so + * we don't try to resume a port that has been shutdown. + */ + tty_port_set_suspended(port, 0); + + /* + * Do not free() the transmit buffer page under the port lock since + * this can create various circular locking scenarios. For instance, + * console driver may need to allocate/free a debug object, which + * can endup in printk() recursion. + */ + uart_port_lock(state, flags); + xmit_buf = state->xmit.buf; + state->xmit.buf = NULL; + uart_port_unlock(uport, flags); + + if (xmit_buf) + free_page((unsigned long)xmit_buf); +} + +/** + * uart_update_timeout - update per-port FIFO timeout. + * @port: uart_port structure describing the port + * @cflag: termios cflag value + * @baud: speed of the port + * + * Set the port FIFO timeout value. The @cflag value should + * reflect the actual hardware settings. + */ +void +uart_update_timeout(struct uart_port *port, unsigned int cflag, + unsigned int baud) +{ + unsigned int bits; + + /* byte size and parity */ + switch (cflag & CSIZE) { + case CS5: + bits = 7; + break; + case CS6: + bits = 8; + break; + case CS7: + bits = 9; + break; + default: + bits = 10; + break; /* CS8 */ + } + + if (cflag & CSTOPB) + bits++; + if (cflag & PARENB) + bits++; + + /* + * The total number of bits to be transmitted in the fifo. + */ + bits = bits * port->fifosize; + + /* + * Figure the timeout to send the above number of bits. + * Add .02 seconds of slop + */ + port->timeout = (HZ * bits) / baud + HZ/50; +} + +EXPORT_SYMBOL(uart_update_timeout); + +/** + * uart_get_baud_rate - return baud rate for a particular port + * @port: uart_port structure describing the port in question. + * @termios: desired termios settings. + * @old: old termios (or NULL) + * @min: minimum acceptable baud rate + * @max: maximum acceptable baud rate + * + * Decode the termios structure into a numeric baud rate, + * taking account of the magic 38400 baud rate (with spd_* + * flags), and mapping the %B0 rate to 9600 baud. + * + * If the new baud rate is invalid, try the old termios setting. + * If it's still invalid, we try 9600 baud. + * + * Update the @termios structure to reflect the baud rate + * we're actually going to be using. Don't do this for the case + * where B0 is requested ("hang up"). + */ +unsigned int +uart_get_baud_rate(struct uart_port *port, struct ktermios *termios, + struct ktermios *old, unsigned int min, unsigned int max) +{ + unsigned int try; + unsigned int baud; + unsigned int altbaud; + int hung_up = 0; + upf_t flags = port->flags & UPF_SPD_MASK; + + switch (flags) { + case UPF_SPD_HI: + altbaud = 57600; + break; + case UPF_SPD_VHI: + altbaud = 115200; + break; + case UPF_SPD_SHI: + altbaud = 230400; + break; + case UPF_SPD_WARP: + altbaud = 460800; + break; + default: + altbaud = 38400; + break; + } + + for (try = 0; try < 2; try++) { + baud = tty_termios_baud_rate(termios); + + /* + * The spd_hi, spd_vhi, spd_shi, spd_warp kludge... + * Die! Die! Die! + */ + if (try == 0 && baud == 38400) + baud = altbaud; + + /* + * Special case: B0 rate. + */ + if (baud == 0) { + hung_up = 1; + baud = 9600; + } + + if (baud >= min && baud <= max) + return baud; + + /* + * Oops, the quotient was zero. Try again with + * the old baud rate if possible. + */ + termios->c_cflag &= ~CBAUD; + if (old) { + baud = tty_termios_baud_rate(old); + if (!hung_up) + tty_termios_encode_baud_rate(termios, + baud, baud); + old = NULL; + continue; + } + + /* + * As a last resort, if the range cannot be met then clip to + * the nearest chip supported rate. + */ + if (!hung_up) { + if (baud <= min) + tty_termios_encode_baud_rate(termios, + min + 1, min + 1); + else + tty_termios_encode_baud_rate(termios, + max - 1, max - 1); + } + } + /* Should never happen */ + WARN_ON(1); + return 0; +} + +EXPORT_SYMBOL(uart_get_baud_rate); + +/** + * uart_get_divisor - return uart clock divisor + * @port: uart_port structure describing the port. + * @baud: desired baud rate + * + * Calculate the uart clock divisor for the port. + */ +unsigned int +uart_get_divisor(struct uart_port *port, unsigned int baud) +{ + unsigned int quot; + + /* + * Old custom speed handling. + */ + if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST) + quot = port->custom_divisor; + else + quot = DIV_ROUND_CLOSEST(port->uartclk, 16 * baud); + + return quot; +} + +EXPORT_SYMBOL(uart_get_divisor); + +/* Caller holds port mutex */ +static void uart_change_speed(struct tty_struct *tty, struct uart_state *state, + struct ktermios *old_termios) +{ + struct uart_port *uport = uart_port_check(state); + struct ktermios *termios; + int hw_stopped; + + /* + * If we have no tty, termios, or the port does not exist, + * then we can't set the parameters for this port. + */ + if (!tty || uport->type == PORT_UNKNOWN) + return; + + termios = &tty->termios; + uport->ops->set_termios(uport, termios, old_termios); + + /* + * Set modem status enables based on termios cflag + */ + spin_lock_irq(&uport->lock); + if (termios->c_cflag & CRTSCTS) + uport->status |= UPSTAT_CTS_ENABLE; + else + uport->status &= ~UPSTAT_CTS_ENABLE; + + if (termios->c_cflag & CLOCAL) + uport->status &= ~UPSTAT_DCD_ENABLE; + else + uport->status |= UPSTAT_DCD_ENABLE; + + /* reset sw-assisted CTS flow control based on (possibly) new mode */ + hw_stopped = uport->hw_stopped; + uport->hw_stopped = uart_softcts_mode(uport) && + !(uport->ops->get_mctrl(uport) & TIOCM_CTS); + if (uport->hw_stopped) { + if (!hw_stopped) + uport->ops->stop_tx(uport); + } else { + if (hw_stopped) + __uart_start(tty); + } + spin_unlock_irq(&uport->lock); +} + +static int uart_put_char(struct tty_struct *tty, unsigned char c) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port; + struct circ_buf *circ; + unsigned long flags; + int ret = 0; + + circ = &state->xmit; + port = uart_port_lock(state, flags); + if (!circ->buf) { + uart_port_unlock(port, flags); + return 0; + } + + if (port && uart_circ_chars_free(circ) != 0) { + circ->buf[circ->head] = c; + circ->head = (circ->head + 1) & (UART_XMIT_SIZE - 1); + ret = 1; + } + uart_port_unlock(port, flags); + return ret; +} + +static void uart_flush_chars(struct tty_struct *tty) +{ + uart_start(tty); +} + +static int uart_write(struct tty_struct *tty, + const unsigned char *buf, int count) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port; + struct circ_buf *circ; + unsigned long flags; + int c, ret = 0; + + /* + * This means you called this function _after_ the port was + * closed. No cookie for you. + */ + if (!state) { + WARN_ON(1); + return -EL3HLT; + } + + port = uart_port_lock(state, flags); + circ = &state->xmit; + if (!circ->buf) { + uart_port_unlock(port, flags); + return 0; + } + + while (port) { + c = CIRC_SPACE_TO_END(circ->head, circ->tail, UART_XMIT_SIZE); + if (count < c) + c = count; + if (c <= 0) + break; + memcpy(circ->buf + circ->head, buf, c); + circ->head = (circ->head + c) & (UART_XMIT_SIZE - 1); + buf += c; + count -= c; + ret += c; + } + + __uart_start(tty); + uart_port_unlock(port, flags); + return ret; +} + +static int uart_write_room(struct tty_struct *tty) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port; + unsigned long flags; + int ret; + + port = uart_port_lock(state, flags); + ret = uart_circ_chars_free(&state->xmit); + uart_port_unlock(port, flags); + return ret; +} + +static int uart_chars_in_buffer(struct tty_struct *tty) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port; + unsigned long flags; + int ret; + + port = uart_port_lock(state, flags); + ret = uart_circ_chars_pending(&state->xmit); + uart_port_unlock(port, flags); + return ret; +} + +static void uart_flush_buffer(struct tty_struct *tty) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port; + unsigned long flags; + + /* + * This means you called this function _after_ the port was + * closed. No cookie for you. + */ + if (!state) { + WARN_ON(1); + return; + } + + pr_debug("uart_flush_buffer(%d) called\n", tty->index); + + port = uart_port_lock(state, flags); + if (!port) + return; + uart_circ_clear(&state->xmit); + if (port->ops->flush_buffer) + port->ops->flush_buffer(port); + uart_port_unlock(port, flags); + tty_port_tty_wakeup(&state->port); +} + +/* + * This function performs low-level write of high-priority XON/XOFF + * character and accounting for it. + * + * Requires uart_port to implement .serial_out(). + */ +void uart_xchar_out(struct uart_port *uport, int offset) +{ + serial_port_out(uport, offset, uport->x_char); + uport->icount.tx++; + uport->x_char = 0; +} +EXPORT_SYMBOL_GPL(uart_xchar_out); + +/* + * This function is used to send a high-priority XON/XOFF character to + * the device + */ +static void uart_send_xchar(struct tty_struct *tty, char ch) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port; + unsigned long flags; + + port = uart_port_ref(state); + if (!port) + return; + + if (port->ops->send_xchar) + port->ops->send_xchar(port, ch); + else { + spin_lock_irqsave(&port->lock, flags); + port->x_char = ch; + if (ch) + port->ops->start_tx(port); + spin_unlock_irqrestore(&port->lock, flags); + } + uart_port_deref(port); +} + +static void uart_throttle(struct tty_struct *tty) +{ + struct uart_state *state = tty->driver_data; + upstat_t mask = UPSTAT_SYNC_FIFO; + struct uart_port *port; + + port = uart_port_ref(state); + if (!port) + return; + + if (I_IXOFF(tty)) + mask |= UPSTAT_AUTOXOFF; + if (C_CRTSCTS(tty)) + mask |= UPSTAT_AUTORTS; + + if (port->status & mask) { + port->ops->throttle(port); + mask &= ~port->status; + } + + if (mask & UPSTAT_AUTORTS) + uart_clear_mctrl(port, TIOCM_RTS); + + if (mask & UPSTAT_AUTOXOFF) + uart_send_xchar(tty, STOP_CHAR(tty)); + + uart_port_deref(port); +} + +static void uart_unthrottle(struct tty_struct *tty) +{ + struct uart_state *state = tty->driver_data; + upstat_t mask = UPSTAT_SYNC_FIFO; + struct uart_port *port; + + port = uart_port_ref(state); + if (!port) + return; + + if (I_IXOFF(tty)) + mask |= UPSTAT_AUTOXOFF; + if (C_CRTSCTS(tty)) + mask |= UPSTAT_AUTORTS; + + if (port->status & mask) { + port->ops->unthrottle(port); + mask &= ~port->status; + } + + if (mask & UPSTAT_AUTORTS) + uart_set_mctrl(port, TIOCM_RTS); + + if (mask & UPSTAT_AUTOXOFF) + uart_send_xchar(tty, START_CHAR(tty)); + + uart_port_deref(port); +} + +static int uart_get_info(struct tty_port *port, struct serial_struct *retinfo) +{ + struct uart_state *state = container_of(port, struct uart_state, port); + struct uart_port *uport; + int ret = -ENODEV; + + memset(retinfo, 0, sizeof(*retinfo)); + + /* + * Ensure the state we copy is consistent and no hardware changes + * occur as we go + */ + mutex_lock(&port->mutex); + uport = uart_port_check(state); + if (!uport) + goto out; + + retinfo->type = uport->type; + retinfo->line = uport->line; + retinfo->port = uport->iobase; + if (HIGH_BITS_OFFSET) + retinfo->port_high = (long) uport->iobase >> HIGH_BITS_OFFSET; + retinfo->irq = uport->irq; + retinfo->flags = (__force int)uport->flags; + retinfo->xmit_fifo_size = uport->fifosize; + retinfo->baud_base = uport->uartclk / 16; + retinfo->close_delay = jiffies_to_msecs(port->close_delay) / 10; + retinfo->closing_wait = port->closing_wait == ASYNC_CLOSING_WAIT_NONE ? + ASYNC_CLOSING_WAIT_NONE : + jiffies_to_msecs(port->closing_wait) / 10; + retinfo->custom_divisor = uport->custom_divisor; + retinfo->hub6 = uport->hub6; + retinfo->io_type = uport->iotype; + retinfo->iomem_reg_shift = uport->regshift; + retinfo->iomem_base = (void *)(unsigned long)uport->mapbase; + + ret = 0; +out: + mutex_unlock(&port->mutex); + return ret; +} + +static int uart_get_info_user(struct tty_struct *tty, + struct serial_struct *ss) +{ + struct uart_state *state = tty->driver_data; + struct tty_port *port = &state->port; + + return uart_get_info(port, ss) < 0 ? -EIO : 0; +} + +static int uart_set_info(struct tty_struct *tty, struct tty_port *port, + struct uart_state *state, + struct serial_struct *new_info) +{ + struct uart_port *uport = uart_port_check(state); + unsigned long new_port; + unsigned int change_irq, change_port, closing_wait; + unsigned int old_custom_divisor, close_delay; + upf_t old_flags, new_flags; + int retval = 0; + + if (!uport) + return -EIO; + + new_port = new_info->port; + if (HIGH_BITS_OFFSET) + new_port += (unsigned long) new_info->port_high << HIGH_BITS_OFFSET; + + new_info->irq = irq_canonicalize(new_info->irq); + close_delay = msecs_to_jiffies(new_info->close_delay * 10); + closing_wait = new_info->closing_wait == ASYNC_CLOSING_WAIT_NONE ? + ASYNC_CLOSING_WAIT_NONE : + msecs_to_jiffies(new_info->closing_wait * 10); + + + change_irq = !(uport->flags & UPF_FIXED_PORT) + && new_info->irq != uport->irq; + + /* + * Since changing the 'type' of the port changes its resource + * allocations, we should treat type changes the same as + * IO port changes. + */ + change_port = !(uport->flags & UPF_FIXED_PORT) + && (new_port != uport->iobase || + (unsigned long)new_info->iomem_base != uport->mapbase || + new_info->hub6 != uport->hub6 || + new_info->io_type != uport->iotype || + new_info->iomem_reg_shift != uport->regshift || + new_info->type != uport->type); + + old_flags = uport->flags; + new_flags = (__force upf_t)new_info->flags; + old_custom_divisor = uport->custom_divisor; + + if (!capable(CAP_SYS_ADMIN)) { + retval = -EPERM; + if (change_irq || change_port || + (new_info->baud_base != uport->uartclk / 16) || + (close_delay != port->close_delay) || + (closing_wait != port->closing_wait) || + (new_info->xmit_fifo_size && + new_info->xmit_fifo_size != uport->fifosize) || + (((new_flags ^ old_flags) & ~UPF_USR_MASK) != 0)) + goto exit; + uport->flags = ((uport->flags & ~UPF_USR_MASK) | + (new_flags & UPF_USR_MASK)); + uport->custom_divisor = new_info->custom_divisor; + goto check_and_exit; + } + + if (change_irq || change_port) { + retval = security_locked_down(LOCKDOWN_TIOCSSERIAL); + if (retval) + goto exit; + } + + /* + * Ask the low level driver to verify the settings. + */ + if (uport->ops->verify_port) + retval = uport->ops->verify_port(uport, new_info); + + if ((new_info->irq >= nr_irqs) || (new_info->irq < 0) || + (new_info->baud_base < 9600)) + retval = -EINVAL; + + if (retval) + goto exit; + + if (change_port || change_irq) { + retval = -EBUSY; + + /* + * Make sure that we are the sole user of this port. + */ + if (tty_port_users(port) > 1) + goto exit; + + /* + * We need to shutdown the serial port at the old + * port/type/irq combination. + */ + uart_shutdown(tty, state); + } + + if (change_port) { + unsigned long old_iobase, old_mapbase; + unsigned int old_type, old_iotype, old_hub6, old_shift; + + old_iobase = uport->iobase; + old_mapbase = uport->mapbase; + old_type = uport->type; + old_hub6 = uport->hub6; + old_iotype = uport->iotype; + old_shift = uport->regshift; + + /* + * Free and release old regions + */ + if (old_type != PORT_UNKNOWN && uport->ops->release_port) + uport->ops->release_port(uport); + + uport->iobase = new_port; + uport->type = new_info->type; + uport->hub6 = new_info->hub6; + uport->iotype = new_info->io_type; + uport->regshift = new_info->iomem_reg_shift; + uport->mapbase = (unsigned long)new_info->iomem_base; + + /* + * Claim and map the new regions + */ + if (uport->type != PORT_UNKNOWN && uport->ops->request_port) { + retval = uport->ops->request_port(uport); + } else { + /* Always success - Jean II */ + retval = 0; + } + + /* + * If we fail to request resources for the + * new port, try to restore the old settings. + */ + if (retval) { + uport->iobase = old_iobase; + uport->type = old_type; + uport->hub6 = old_hub6; + uport->iotype = old_iotype; + uport->regshift = old_shift; + uport->mapbase = old_mapbase; + + if (old_type != PORT_UNKNOWN) { + retval = uport->ops->request_port(uport); + /* + * If we failed to restore the old settings, + * we fail like this. + */ + if (retval) + uport->type = PORT_UNKNOWN; + + /* + * We failed anyway. + */ + retval = -EBUSY; + } + + /* Added to return the correct error -Ram Gupta */ + goto exit; + } + } + + if (change_irq) + uport->irq = new_info->irq; + if (!(uport->flags & UPF_FIXED_PORT)) + uport->uartclk = new_info->baud_base * 16; + uport->flags = (uport->flags & ~UPF_CHANGE_MASK) | + (new_flags & UPF_CHANGE_MASK); + uport->custom_divisor = new_info->custom_divisor; + port->close_delay = close_delay; + port->closing_wait = closing_wait; + if (new_info->xmit_fifo_size) + uport->fifosize = new_info->xmit_fifo_size; + port->low_latency = (uport->flags & UPF_LOW_LATENCY) ? 1 : 0; + + check_and_exit: + retval = 0; + if (uport->type == PORT_UNKNOWN) + goto exit; + if (tty_port_initialized(port)) { + if (((old_flags ^ uport->flags) & UPF_SPD_MASK) || + old_custom_divisor != uport->custom_divisor) { + /* + * If they're setting up a custom divisor or speed, + * instead of clearing it, then bitch about it. + */ + if (uport->flags & UPF_SPD_MASK) { + dev_notice_ratelimited(uport->dev, + "%s sets custom speed on %s. This is deprecated.\n", + current->comm, + tty_name(port->tty)); + } + uart_change_speed(tty, state, NULL); + } + } else { + retval = uart_startup(tty, state, 1); + if (retval == 0) + tty_port_set_initialized(port, true); + if (retval > 0) + retval = 0; + } + exit: + return retval; +} + +static int uart_set_info_user(struct tty_struct *tty, struct serial_struct *ss) +{ + struct uart_state *state = tty->driver_data; + struct tty_port *port = &state->port; + int retval; + + down_write(&tty->termios_rwsem); + /* + * This semaphore protects port->count. It is also + * very useful to prevent opens. Also, take the + * port configuration semaphore to make sure that a + * module insertion/removal doesn't change anything + * under us. + */ + mutex_lock(&port->mutex); + retval = uart_set_info(tty, port, state, ss); + mutex_unlock(&port->mutex); + up_write(&tty->termios_rwsem); + return retval; +} + +/** + * uart_get_lsr_info - get line status register info + * @tty: tty associated with the UART + * @state: UART being queried + * @value: returned modem value + */ +static int uart_get_lsr_info(struct tty_struct *tty, + struct uart_state *state, unsigned int __user *value) +{ + struct uart_port *uport = uart_port_check(state); + unsigned int result; + + result = uport->ops->tx_empty(uport); + + /* + * If we're about to load something into the transmit + * register, we'll pretend the transmitter isn't empty to + * avoid a race condition (depending on when the transmit + * interrupt happens). + */ + if (uport->x_char || + ((uart_circ_chars_pending(&state->xmit) > 0) && + !uart_tx_stopped(uport))) + result &= ~TIOCSER_TEMT; + + return put_user(result, value); +} + +static int uart_tiocmget(struct tty_struct *tty) +{ + struct uart_state *state = tty->driver_data; + struct tty_port *port = &state->port; + struct uart_port *uport; + int result = -EIO; + + mutex_lock(&port->mutex); + uport = uart_port_check(state); + if (!uport) + goto out; + + if (!tty_io_error(tty)) { + result = uport->mctrl; + spin_lock_irq(&uport->lock); + result |= uport->ops->get_mctrl(uport); + spin_unlock_irq(&uport->lock); + } +out: + mutex_unlock(&port->mutex); + return result; +} + +static int +uart_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) +{ + struct uart_state *state = tty->driver_data; + struct tty_port *port = &state->port; + struct uart_port *uport; + int ret = -EIO; + + mutex_lock(&port->mutex); + uport = uart_port_check(state); + if (!uport) + goto out; + + if (!tty_io_error(tty)) { + uart_update_mctrl(uport, set, clear); + ret = 0; + } +out: + mutex_unlock(&port->mutex); + return ret; +} + +static int uart_break_ctl(struct tty_struct *tty, int break_state) +{ + struct uart_state *state = tty->driver_data; + struct tty_port *port = &state->port; + struct uart_port *uport; + int ret = -EIO; + + mutex_lock(&port->mutex); + uport = uart_port_check(state); + if (!uport) + goto out; + + if (uport->type != PORT_UNKNOWN && uport->ops->break_ctl) + uport->ops->break_ctl(uport, break_state); + ret = 0; +out: + mutex_unlock(&port->mutex); + return ret; +} + +static int uart_do_autoconfig(struct tty_struct *tty, struct uart_state *state) +{ + struct tty_port *port = &state->port; + struct uart_port *uport; + int flags, ret; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + /* + * Take the per-port semaphore. This prevents count from + * changing, and hence any extra opens of the port while + * we're auto-configuring. + */ + if (mutex_lock_interruptible(&port->mutex)) + return -ERESTARTSYS; + + uport = uart_port_check(state); + if (!uport) { + ret = -EIO; + goto out; + } + + ret = -EBUSY; + if (tty_port_users(port) == 1) { + uart_shutdown(tty, state); + + /* + * If we already have a port type configured, + * we must release its resources. + */ + if (uport->type != PORT_UNKNOWN && uport->ops->release_port) + uport->ops->release_port(uport); + + flags = UART_CONFIG_TYPE; + if (uport->flags & UPF_AUTO_IRQ) + flags |= UART_CONFIG_IRQ; + + /* + * This will claim the ports resources if + * a port is found. + */ + uport->ops->config_port(uport, flags); + + ret = uart_startup(tty, state, 1); + if (ret == 0) + tty_port_set_initialized(port, true); + if (ret > 0) + ret = 0; + } +out: + mutex_unlock(&port->mutex); + return ret; +} + +static void uart_enable_ms(struct uart_port *uport) +{ + /* + * Force modem status interrupts on + */ + if (uport->ops->enable_ms) + uport->ops->enable_ms(uport); +} + +/* + * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change + * - mask passed in arg for lines of interest + * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) + * Caller should use TIOCGICOUNT to see which one it was + * + * FIXME: This wants extracting into a common all driver implementation + * of TIOCMWAIT using tty_port. + */ +static int uart_wait_modem_status(struct uart_state *state, unsigned long arg) +{ + struct uart_port *uport; + struct tty_port *port = &state->port; + DECLARE_WAITQUEUE(wait, current); + struct uart_icount cprev, cnow; + int ret; + + /* + * note the counters on entry + */ + uport = uart_port_ref(state); + if (!uport) + return -EIO; + spin_lock_irq(&uport->lock); + memcpy(&cprev, &uport->icount, sizeof(struct uart_icount)); + uart_enable_ms(uport); + spin_unlock_irq(&uport->lock); + + add_wait_queue(&port->delta_msr_wait, &wait); + for (;;) { + spin_lock_irq(&uport->lock); + memcpy(&cnow, &uport->icount, sizeof(struct uart_icount)); + spin_unlock_irq(&uport->lock); + + set_current_state(TASK_INTERRUPTIBLE); + + if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || + ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || + ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || + ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) { + ret = 0; + break; + } + + schedule(); + + /* see if a signal did it */ + if (signal_pending(current)) { + ret = -ERESTARTSYS; + break; + } + + cprev = cnow; + } + __set_current_state(TASK_RUNNING); + remove_wait_queue(&port->delta_msr_wait, &wait); + uart_port_deref(uport); + + return ret; +} + +/* + * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) + * Return: write counters to the user passed counter struct + * NB: both 1->0 and 0->1 transitions are counted except for + * RI where only 0->1 is counted. + */ +static int uart_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount) +{ + struct uart_state *state = tty->driver_data; + struct uart_icount cnow; + struct uart_port *uport; + + uport = uart_port_ref(state); + if (!uport) + return -EIO; + spin_lock_irq(&uport->lock); + memcpy(&cnow, &uport->icount, sizeof(struct uart_icount)); + spin_unlock_irq(&uport->lock); + uart_port_deref(uport); + + icount->cts = cnow.cts; + icount->dsr = cnow.dsr; + icount->rng = cnow.rng; + icount->dcd = cnow.dcd; + icount->rx = cnow.rx; + icount->tx = cnow.tx; + icount->frame = cnow.frame; + icount->overrun = cnow.overrun; + icount->parity = cnow.parity; + icount->brk = cnow.brk; + icount->buf_overrun = cnow.buf_overrun; + + return 0; +} + +static int uart_get_rs485_config(struct uart_port *port, + struct serial_rs485 __user *rs485) +{ + unsigned long flags; + struct serial_rs485 aux; + + spin_lock_irqsave(&port->lock, flags); + aux = port->rs485; + spin_unlock_irqrestore(&port->lock, flags); + + if (copy_to_user(rs485, &aux, sizeof(aux))) + return -EFAULT; + + return 0; +} + +static int uart_set_rs485_config(struct uart_port *port, + struct serial_rs485 __user *rs485_user) +{ + struct serial_rs485 rs485; + int ret; + unsigned long flags; + + if (!port->rs485_config) + return -ENOTTY; + + if (copy_from_user(&rs485, rs485_user, sizeof(*rs485_user))) + return -EFAULT; + + /* pick sane settings if the user hasn't */ + if (!(rs485.flags & SER_RS485_RTS_ON_SEND) == + !(rs485.flags & SER_RS485_RTS_AFTER_SEND)) { + dev_warn_ratelimited(port->dev, + "%s (%d): invalid RTS setting, using RTS_ON_SEND instead\n", + port->name, port->line); + rs485.flags |= SER_RS485_RTS_ON_SEND; + rs485.flags &= ~SER_RS485_RTS_AFTER_SEND; + } + + if (rs485.delay_rts_before_send > RS485_MAX_RTS_DELAY) { + rs485.delay_rts_before_send = RS485_MAX_RTS_DELAY; + dev_warn_ratelimited(port->dev, + "%s (%d): RTS delay before sending clamped to %u ms\n", + port->name, port->line, rs485.delay_rts_before_send); + } + + if (rs485.delay_rts_after_send > RS485_MAX_RTS_DELAY) { + rs485.delay_rts_after_send = RS485_MAX_RTS_DELAY; + dev_warn_ratelimited(port->dev, + "%s (%d): RTS delay after sending clamped to %u ms\n", + port->name, port->line, rs485.delay_rts_after_send); + } + /* Return clean padding area to userspace */ + memset(rs485.padding, 0, sizeof(rs485.padding)); + + spin_lock_irqsave(&port->lock, flags); + ret = port->rs485_config(port, &rs485); + if (!ret) { + port->rs485 = rs485; + + /* Reset RTS and other mctrl lines when disabling RS485 */ + if (!(rs485.flags & SER_RS485_ENABLED)) + port->ops->set_mctrl(port, port->mctrl); + } + spin_unlock_irqrestore(&port->lock, flags); + if (ret) + return ret; + + if (copy_to_user(rs485_user, &port->rs485, sizeof(port->rs485))) + return -EFAULT; + + return 0; +} + +static int uart_get_iso7816_config(struct uart_port *port, + struct serial_iso7816 __user *iso7816) +{ + unsigned long flags; + struct serial_iso7816 aux; + + if (!port->iso7816_config) + return -ENOTTY; + + spin_lock_irqsave(&port->lock, flags); + aux = port->iso7816; + spin_unlock_irqrestore(&port->lock, flags); + + if (copy_to_user(iso7816, &aux, sizeof(aux))) + return -EFAULT; + + return 0; +} + +static int uart_set_iso7816_config(struct uart_port *port, + struct serial_iso7816 __user *iso7816_user) +{ + struct serial_iso7816 iso7816; + int i, ret; + unsigned long flags; + + if (!port->iso7816_config) + return -ENOTTY; + + if (copy_from_user(&iso7816, iso7816_user, sizeof(*iso7816_user))) + return -EFAULT; + + /* + * There are 5 words reserved for future use. Check that userspace + * doesn't put stuff in there to prevent breakages in the future. + */ + for (i = 0; i < 5; i++) + if (iso7816.reserved[i]) + return -EINVAL; + + spin_lock_irqsave(&port->lock, flags); + ret = port->iso7816_config(port, &iso7816); + spin_unlock_irqrestore(&port->lock, flags); + if (ret) + return ret; + + if (copy_to_user(iso7816_user, &port->iso7816, sizeof(port->iso7816))) + return -EFAULT; + + return 0; +} + +/* + * Called via sys_ioctl. We can use spin_lock_irq() here. + */ +static int +uart_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) +{ + struct uart_state *state = tty->driver_data; + struct tty_port *port = &state->port; + struct uart_port *uport; + void __user *uarg = (void __user *)arg; + int ret = -ENOIOCTLCMD; + + + /* + * These ioctls don't rely on the hardware to be present. + */ + switch (cmd) { + case TIOCSERCONFIG: + down_write(&tty->termios_rwsem); + ret = uart_do_autoconfig(tty, state); + up_write(&tty->termios_rwsem); + break; + } + + if (ret != -ENOIOCTLCMD) + goto out; + + if (tty_io_error(tty)) { + ret = -EIO; + goto out; + } + + /* + * The following should only be used when hardware is present. + */ + switch (cmd) { + case TIOCMIWAIT: + ret = uart_wait_modem_status(state, arg); + break; + } + + if (ret != -ENOIOCTLCMD) + goto out; + + mutex_lock(&port->mutex); + uport = uart_port_check(state); + + if (!uport || tty_io_error(tty)) { + ret = -EIO; + goto out_up; + } + + /* + * All these rely on hardware being present and need to be + * protected against the tty being hung up. + */ + + switch (cmd) { + case TIOCSERGETLSR: /* Get line status register */ + ret = uart_get_lsr_info(tty, state, uarg); + break; + + case TIOCGRS485: + ret = uart_get_rs485_config(uport, uarg); + break; + + case TIOCSRS485: + ret = uart_set_rs485_config(uport, uarg); + break; + + case TIOCSISO7816: + ret = uart_set_iso7816_config(state->uart_port, uarg); + break; + + case TIOCGISO7816: + ret = uart_get_iso7816_config(state->uart_port, uarg); + break; + default: + if (uport->ops->ioctl) + ret = uport->ops->ioctl(uport, cmd, arg); + break; + } +out_up: + mutex_unlock(&port->mutex); +out: + return ret; +} + +static void uart_set_ldisc(struct tty_struct *tty) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *uport; + struct tty_port *port = &state->port; + + if (!tty_port_initialized(port)) + return; + + mutex_lock(&state->port.mutex); + uport = uart_port_check(state); + if (uport && uport->ops->set_ldisc) + uport->ops->set_ldisc(uport, &tty->termios); + mutex_unlock(&state->port.mutex); +} + +static void uart_set_termios(struct tty_struct *tty, + struct ktermios *old_termios) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *uport; + unsigned int cflag = tty->termios.c_cflag; + unsigned int iflag_mask = IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK; + bool sw_changed = false; + + mutex_lock(&state->port.mutex); + uport = uart_port_check(state); + if (!uport) + goto out; + + /* + * Drivers doing software flow control also need to know + * about changes to these input settings. + */ + if (uport->flags & UPF_SOFT_FLOW) { + iflag_mask |= IXANY|IXON|IXOFF; + sw_changed = + tty->termios.c_cc[VSTART] != old_termios->c_cc[VSTART] || + tty->termios.c_cc[VSTOP] != old_termios->c_cc[VSTOP]; + } + + /* + * These are the bits that are used to setup various + * flags in the low level driver. We can ignore the Bfoo + * bits in c_cflag; c_[io]speed will always be set + * appropriately by set_termios() in tty_ioctl.c + */ + if ((cflag ^ old_termios->c_cflag) == 0 && + tty->termios.c_ospeed == old_termios->c_ospeed && + tty->termios.c_ispeed == old_termios->c_ispeed && + ((tty->termios.c_iflag ^ old_termios->c_iflag) & iflag_mask) == 0 && + !sw_changed) { + goto out; + } + + uart_change_speed(tty, state, old_termios); + /* reload cflag from termios; port driver may have overridden flags */ + cflag = tty->termios.c_cflag; + + /* Handle transition to B0 status */ + if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD)) + uart_clear_mctrl(uport, TIOCM_RTS | TIOCM_DTR); + /* Handle transition away from B0 status */ + else if (!(old_termios->c_cflag & CBAUD) && (cflag & CBAUD)) { + unsigned int mask = TIOCM_DTR; + + if (!(cflag & CRTSCTS) || !tty_throttled(tty)) + mask |= TIOCM_RTS; + uart_set_mctrl(uport, mask); + } +out: + mutex_unlock(&state->port.mutex); +} + +/* + * Calls to uart_close() are serialised via the tty_lock in + * drivers/tty/tty_io.c:tty_release() + * drivers/tty/tty_io.c:do_tty_hangup() + */ +static void uart_close(struct tty_struct *tty, struct file *filp) +{ + struct uart_state *state = tty->driver_data; + + if (!state) { + struct uart_driver *drv = tty->driver->driver_state; + struct tty_port *port; + + state = drv->state + tty->index; + port = &state->port; + spin_lock_irq(&port->lock); + --port->count; + spin_unlock_irq(&port->lock); + return; + } + + pr_debug("uart_close(%d) called\n", tty->index); + + tty_port_close(tty->port, tty, filp); +} + +static void uart_tty_port_shutdown(struct tty_port *port) +{ + struct uart_state *state = container_of(port, struct uart_state, port); + struct uart_port *uport = uart_port_check(state); + char *buf; + + /* + * At this point, we stop accepting input. To do this, we + * disable the receive line status interrupts. + */ + if (WARN(!uport, "detached port still initialized!\n")) + return; + + spin_lock_irq(&uport->lock); + uport->ops->stop_rx(uport); + spin_unlock_irq(&uport->lock); + + uart_port_shutdown(port); + + /* + * It's possible for shutdown to be called after suspend if we get + * a DCD drop (hangup) at just the right time. Clear suspended bit so + * we don't try to resume a port that has been shutdown. + */ + tty_port_set_suspended(port, 0); + + /* + * Free the transmit buffer. + */ + spin_lock_irq(&uport->lock); + buf = state->xmit.buf; + state->xmit.buf = NULL; + spin_unlock_irq(&uport->lock); + + if (buf) + free_page((unsigned long)buf); + + uart_change_pm(state, UART_PM_STATE_OFF); +} + +static void uart_wait_until_sent(struct tty_struct *tty, int timeout) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port; + unsigned long char_time, expire; + + port = uart_port_ref(state); + if (!port) + return; + + if (port->type == PORT_UNKNOWN || port->fifosize == 0) { + uart_port_deref(port); + return; + } + + /* + * Set the check interval to be 1/5 of the estimated time to + * send a single character, and make it at least 1. The check + * interval should also be less than the timeout. + * + * Note: we have to use pretty tight timings here to satisfy + * the NIST-PCTS. + */ + char_time = (port->timeout - HZ/50) / port->fifosize; + char_time = char_time / 5; + if (char_time == 0) + char_time = 1; + if (timeout && timeout < char_time) + char_time = timeout; + + /* + * If the transmitter hasn't cleared in twice the approximate + * amount of time to send the entire FIFO, it probably won't + * ever clear. This assumes the UART isn't doing flow + * control, which is currently the case. Hence, if it ever + * takes longer than port->timeout, this is probably due to a + * UART bug of some kind. So, we clamp the timeout parameter at + * 2*port->timeout. + */ + if (timeout == 0 || timeout > 2 * port->timeout) + timeout = 2 * port->timeout; + + expire = jiffies + timeout; + + pr_debug("uart_wait_until_sent(%d), jiffies=%lu, expire=%lu...\n", + port->line, jiffies, expire); + + /* + * Check whether the transmitter is empty every 'char_time'. + * 'timeout' / 'expire' give us the maximum amount of time + * we wait. + */ + while (!port->ops->tx_empty(port)) { + msleep_interruptible(jiffies_to_msecs(char_time)); + if (signal_pending(current)) + break; + if (time_after(jiffies, expire)) + break; + } + uart_port_deref(port); +} + +/* + * Calls to uart_hangup() are serialised by the tty_lock in + * drivers/tty/tty_io.c:do_tty_hangup() + * This runs from a workqueue and can sleep for a _short_ time only. + */ +static void uart_hangup(struct tty_struct *tty) +{ + struct uart_state *state = tty->driver_data; + struct tty_port *port = &state->port; + struct uart_port *uport; + unsigned long flags; + + pr_debug("uart_hangup(%d)\n", tty->index); + + mutex_lock(&port->mutex); + uport = uart_port_check(state); + WARN(!uport, "hangup of detached port!\n"); + + if (tty_port_active(port)) { + uart_flush_buffer(tty); + uart_shutdown(tty, state); + spin_lock_irqsave(&port->lock, flags); + port->count = 0; + spin_unlock_irqrestore(&port->lock, flags); + tty_port_set_active(port, 0); + tty_port_tty_set(port, NULL); + if (uport && !uart_console(uport)) + uart_change_pm(state, UART_PM_STATE_OFF); + wake_up_interruptible(&port->open_wait); + wake_up_interruptible(&port->delta_msr_wait); + } + mutex_unlock(&port->mutex); +} + +/* uport == NULL if uart_port has already been removed */ +static void uart_port_shutdown(struct tty_port *port) +{ + struct uart_state *state = container_of(port, struct uart_state, port); + struct uart_port *uport = uart_port_check(state); + + /* + * clear delta_msr_wait queue to avoid mem leaks: we may free + * the irq here so the queue might never be woken up. Note + * that we won't end up waiting on delta_msr_wait again since + * any outstanding file descriptors should be pointing at + * hung_up_tty_fops now. + */ + wake_up_interruptible(&port->delta_msr_wait); + + /* + * Free the IRQ and disable the port. + */ + if (uport) + uport->ops->shutdown(uport); + + /* + * Ensure that the IRQ handler isn't running on another CPU. + */ + if (uport) + synchronize_irq(uport->irq); +} + +static int uart_carrier_raised(struct tty_port *port) +{ + struct uart_state *state = container_of(port, struct uart_state, port); + struct uart_port *uport; + int mctrl; + + uport = uart_port_ref(state); + /* + * Should never observe uport == NULL since checks for hangup should + * abort the tty_port_block_til_ready() loop before checking for carrier + * raised -- but report carrier raised if it does anyway so open will + * continue and not sleep + */ + if (WARN_ON(!uport)) + return 1; + spin_lock_irq(&uport->lock); + uart_enable_ms(uport); + mctrl = uport->ops->get_mctrl(uport); + spin_unlock_irq(&uport->lock); + uart_port_deref(uport); + if (mctrl & TIOCM_CAR) + return 1; + return 0; +} + +static void uart_dtr_rts(struct tty_port *port, int raise) +{ + struct uart_state *state = container_of(port, struct uart_state, port); + struct uart_port *uport; + + uport = uart_port_ref(state); + if (!uport) + return; + uart_port_dtr_rts(uport, raise); + uart_port_deref(uport); +} + +static int uart_install(struct tty_driver *driver, struct tty_struct *tty) +{ + struct uart_driver *drv = driver->driver_state; + struct uart_state *state = drv->state + tty->index; + + tty->driver_data = state; + + return tty_standard_install(driver, tty); +} + +/* + * Calls to uart_open are serialised by the tty_lock in + * drivers/tty/tty_io.c:tty_open() + * Note that if this fails, then uart_close() _will_ be called. + * + * In time, we want to scrap the "opening nonpresent ports" + * behaviour and implement an alternative way for setserial + * to set base addresses/ports/types. This will allow us to + * get rid of a certain amount of extra tests. + */ +static int uart_open(struct tty_struct *tty, struct file *filp) +{ + struct uart_state *state = tty->driver_data; + int retval; + + retval = tty_port_open(&state->port, tty, filp); + if (retval > 0) + retval = 0; + + return retval; +} + +static int uart_port_activate(struct tty_port *port, struct tty_struct *tty) +{ + struct uart_state *state = container_of(port, struct uart_state, port); + struct uart_port *uport; + int ret; + + uport = uart_port_check(state); + if (!uport || uport->flags & UPF_DEAD) + return -ENXIO; + + port->low_latency = (uport->flags & UPF_LOW_LATENCY) ? 1 : 0; + + /* + * Start up the serial port. + */ + ret = uart_startup(tty, state, 0); + if (ret > 0) + tty_port_set_active(port, 1); + + return ret; +} + +static const char *uart_type(struct uart_port *port) +{ + const char *str = NULL; + + if (port->ops->type) + str = port->ops->type(port); + + if (!str) + str = "unknown"; + + return str; +} + +#ifdef CONFIG_PROC_FS + +static void uart_line_info(struct seq_file *m, struct uart_driver *drv, int i) +{ + struct uart_state *state = drv->state + i; + struct tty_port *port = &state->port; + enum uart_pm_state pm_state; + struct uart_port *uport; + char stat_buf[32]; + unsigned int status; + int mmio; + + mutex_lock(&port->mutex); + uport = uart_port_check(state); + if (!uport) + goto out; + + mmio = uport->iotype >= UPIO_MEM; + seq_printf(m, "%d: uart:%s %s%08llX irq:%d", + uport->line, uart_type(uport), + mmio ? "mmio:0x" : "port:", + mmio ? (unsigned long long)uport->mapbase + : (unsigned long long)uport->iobase, + uport->irq); + + if (uport->type == PORT_UNKNOWN) { + seq_putc(m, '\n'); + goto out; + } + + if (capable(CAP_SYS_ADMIN)) { + pm_state = state->pm_state; + if (pm_state != UART_PM_STATE_ON) + uart_change_pm(state, UART_PM_STATE_ON); + spin_lock_irq(&uport->lock); + status = uport->ops->get_mctrl(uport); + spin_unlock_irq(&uport->lock); + if (pm_state != UART_PM_STATE_ON) + uart_change_pm(state, pm_state); + + seq_printf(m, " tx:%d rx:%d", + uport->icount.tx, uport->icount.rx); + if (uport->icount.frame) + seq_printf(m, " fe:%d", uport->icount.frame); + if (uport->icount.parity) + seq_printf(m, " pe:%d", uport->icount.parity); + if (uport->icount.brk) + seq_printf(m, " brk:%d", uport->icount.brk); + if (uport->icount.overrun) + seq_printf(m, " oe:%d", uport->icount.overrun); + if (uport->icount.buf_overrun) + seq_printf(m, " bo:%d", uport->icount.buf_overrun); + +#define INFOBIT(bit, str) \ + if (uport->mctrl & (bit)) \ + strncat(stat_buf, (str), sizeof(stat_buf) - \ + strlen(stat_buf) - 2) +#define STATBIT(bit, str) \ + if (status & (bit)) \ + strncat(stat_buf, (str), sizeof(stat_buf) - \ + strlen(stat_buf) - 2) + + stat_buf[0] = '\0'; + stat_buf[1] = '\0'; + INFOBIT(TIOCM_RTS, "|RTS"); + STATBIT(TIOCM_CTS, "|CTS"); + INFOBIT(TIOCM_DTR, "|DTR"); + STATBIT(TIOCM_DSR, "|DSR"); + STATBIT(TIOCM_CAR, "|CD"); + STATBIT(TIOCM_RNG, "|RI"); + if (stat_buf[0]) + stat_buf[0] = ' '; + + seq_puts(m, stat_buf); + } + seq_putc(m, '\n'); +#undef STATBIT +#undef INFOBIT +out: + mutex_unlock(&port->mutex); +} + +static int uart_proc_show(struct seq_file *m, void *v) +{ + struct tty_driver *ttydrv = m->private; + struct uart_driver *drv = ttydrv->driver_state; + int i; + + seq_printf(m, "serinfo:1.0 driver%s%s revision:%s\n", "", "", ""); + for (i = 0; i < drv->nr; i++) + uart_line_info(m, drv, i); + return 0; +} +#endif + +static void uart_port_spin_lock_init(struct uart_port *port) +{ + spin_lock_init(&port->lock); + lockdep_set_class(&port->lock, &port_lock_key); +} + +#if defined(CONFIG_SERIAL_CORE_CONSOLE) || defined(CONFIG_CONSOLE_POLL) +/** + * uart_console_write - write a console message to a serial port + * @port: the port to write the message + * @s: array of characters + * @count: number of characters in string to write + * @putchar: function to write character to port + */ +void uart_console_write(struct uart_port *port, const char *s, + unsigned int count, + void (*putchar)(struct uart_port *, int)) +{ + unsigned int i; + + for (i = 0; i < count; i++, s++) { + if (*s == '\n') + putchar(port, '\r'); + putchar(port, *s); + } +} +EXPORT_SYMBOL_GPL(uart_console_write); + +/* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ +struct uart_port * __init +uart_get_console(struct uart_port *ports, int nr, struct console *co) +{ + int idx = co->index; + + if (idx < 0 || idx >= nr || (ports[idx].iobase == 0 && + ports[idx].membase == NULL)) + for (idx = 0; idx < nr; idx++) + if (ports[idx].iobase != 0 || + ports[idx].membase != NULL) + break; + + co->index = idx; + + return ports + idx; +} + +/** + * uart_parse_earlycon - Parse earlycon options + * @p: ptr to 2nd field (ie., just beyond ',') + * @iotype: ptr for decoded iotype (out) + * @addr: ptr for decoded mapbase/iobase (out) + * @options: ptr for field; NULL if not present (out) + * + * Decodes earlycon kernel command line parameters of the form + * earlycon=,io|mmio|mmio16|mmio32|mmio32be|mmio32native,, + * console=,io|mmio|mmio16|mmio32|mmio32be|mmio32native,, + * + * The optional form + * + * earlycon=,0x, + * console=,0x, + * + * is also accepted; the returned @iotype will be UPIO_MEM. + * + * Returns 0 on success or -EINVAL on failure + */ +int uart_parse_earlycon(char *p, unsigned char *iotype, resource_size_t *addr, + char **options) +{ + if (strncmp(p, "mmio,", 5) == 0) { + *iotype = UPIO_MEM; + p += 5; + } else if (strncmp(p, "mmio16,", 7) == 0) { + *iotype = UPIO_MEM16; + p += 7; + } else if (strncmp(p, "mmio32,", 7) == 0) { + *iotype = UPIO_MEM32; + p += 7; + } else if (strncmp(p, "mmio32be,", 9) == 0) { + *iotype = UPIO_MEM32BE; + p += 9; + } else if (strncmp(p, "mmio32native,", 13) == 0) { + *iotype = IS_ENABLED(CONFIG_CPU_BIG_ENDIAN) ? + UPIO_MEM32BE : UPIO_MEM32; + p += 13; + } else if (strncmp(p, "io,", 3) == 0) { + *iotype = UPIO_PORT; + p += 3; + } else if (strncmp(p, "0x", 2) == 0) { + *iotype = UPIO_MEM; + } else { + return -EINVAL; + } + + /* + * Before you replace it with kstrtoull(), think about options separator + * (',') it will not tolerate + */ + *addr = simple_strtoull(p, NULL, 0); + p = strchr(p, ','); + if (p) + p++; + + *options = p; + return 0; +} +EXPORT_SYMBOL_GPL(uart_parse_earlycon); + +/** + * uart_parse_options - Parse serial port baud/parity/bits/flow control. + * @options: pointer to option string + * @baud: pointer to an 'int' variable for the baud rate. + * @parity: pointer to an 'int' variable for the parity. + * @bits: pointer to an 'int' variable for the number of data bits. + * @flow: pointer to an 'int' variable for the flow control character. + * + * uart_parse_options decodes a string containing the serial console + * options. The format of the string is , + * eg: 115200n8r + */ +void +uart_parse_options(const char *options, int *baud, int *parity, + int *bits, int *flow) +{ + const char *s = options; + + *baud = simple_strtoul(s, NULL, 10); + while (*s >= '0' && *s <= '9') + s++; + if (*s) + *parity = *s++; + if (*s) + *bits = *s++ - '0'; + if (*s) + *flow = *s; +} +EXPORT_SYMBOL_GPL(uart_parse_options); + +/** + * uart_set_options - setup the serial console parameters + * @port: pointer to the serial ports uart_port structure + * @co: console pointer + * @baud: baud rate + * @parity: parity character - 'n' (none), 'o' (odd), 'e' (even) + * @bits: number of data bits + * @flow: flow control character - 'r' (rts) + */ +int +uart_set_options(struct uart_port *port, struct console *co, + int baud, int parity, int bits, int flow) +{ + struct ktermios termios; + static struct ktermios dummy; + + /* + * Ensure that the serial-console lock is initialised early. + * + * Note that the console-enabled check is needed because of kgdboc, + * which can end up calling uart_set_options() for an already enabled + * console via tty_find_polling_driver() and uart_poll_init(). + */ + if (!uart_console_enabled(port) && !port->console_reinit) + uart_port_spin_lock_init(port); + + memset(&termios, 0, sizeof(struct ktermios)); + + termios.c_cflag |= CREAD | HUPCL | CLOCAL; + tty_termios_encode_baud_rate(&termios, baud, baud); + + if (bits == 7) + termios.c_cflag |= CS7; + else + termios.c_cflag |= CS8; + + switch (parity) { + case 'o': case 'O': + termios.c_cflag |= PARODD; + fallthrough; + case 'e': case 'E': + termios.c_cflag |= PARENB; + break; + } + + if (flow == 'r') + termios.c_cflag |= CRTSCTS; + + /* + * some uarts on other side don't support no flow control. + * So we set * DTR in host uart to make them happy + */ + port->mctrl |= TIOCM_DTR; + + port->ops->set_termios(port, &termios, &dummy); + /* + * Allow the setting of the UART parameters with a NULL console + * too: + */ + if (co) { + co->cflag = termios.c_cflag; + co->ispeed = termios.c_ispeed; + co->ospeed = termios.c_ospeed; + } + + return 0; +} +EXPORT_SYMBOL_GPL(uart_set_options); +#endif /* CONFIG_SERIAL_CORE_CONSOLE */ + +/** + * uart_change_pm - set power state of the port + * + * @state: port descriptor + * @pm_state: new state + * + * Locking: port->mutex has to be held + */ +static void uart_change_pm(struct uart_state *state, + enum uart_pm_state pm_state) +{ + struct uart_port *port = uart_port_check(state); + + if (state->pm_state != pm_state) { + if (port && port->ops->pm) + port->ops->pm(port, pm_state, state->pm_state); + state->pm_state = pm_state; + } +} + +struct uart_match { + struct uart_port *port; + struct uart_driver *driver; +}; + +static int serial_match_port(struct device *dev, void *data) +{ + struct uart_match *match = data; + struct tty_driver *tty_drv = match->driver->tty_driver; + dev_t devt = MKDEV(tty_drv->major, tty_drv->minor_start) + + match->port->line; + + return dev->devt == devt; /* Actually, only one tty per port */ +} + +int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport) +{ + struct uart_state *state = drv->state + uport->line; + struct tty_port *port = &state->port; + struct device *tty_dev; + struct uart_match match = {uport, drv}; + + mutex_lock(&port->mutex); + + tty_dev = device_find_child(uport->dev, &match, serial_match_port); + if (tty_dev && device_may_wakeup(tty_dev)) { + enable_irq_wake(uport->irq); + put_device(tty_dev); + mutex_unlock(&port->mutex); + return 0; + } + put_device(tty_dev); + + /* Nothing to do if the console is not suspending */ + if (!console_suspend_enabled && uart_console(uport)) + goto unlock; + + uport->suspended = 1; + + if (tty_port_initialized(port)) { + const struct uart_ops *ops = uport->ops; + int tries; + + tty_port_set_suspended(port, 1); + tty_port_set_initialized(port, 0); + + spin_lock_irq(&uport->lock); + ops->stop_tx(uport); + if (!(uport->rs485.flags & SER_RS485_ENABLED)) + ops->set_mctrl(uport, 0); + ops->stop_rx(uport); + spin_unlock_irq(&uport->lock); + + /* + * Wait for the transmitter to empty. + */ + for (tries = 3; !ops->tx_empty(uport) && tries; tries--) + msleep(10); + if (!tries) + dev_err(uport->dev, "%s: Unable to drain transmitter\n", + uport->name); + + ops->shutdown(uport); + } + + /* + * Disable the console device before suspending. + */ + if (uart_console(uport)) + console_stop(uport->cons); + + uart_change_pm(state, UART_PM_STATE_OFF); +unlock: + mutex_unlock(&port->mutex); + + return 0; +} + +int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) +{ + struct uart_state *state = drv->state + uport->line; + struct tty_port *port = &state->port; + struct device *tty_dev; + struct uart_match match = {uport, drv}; + struct ktermios termios; + + mutex_lock(&port->mutex); + + tty_dev = device_find_child(uport->dev, &match, serial_match_port); + if (!uport->suspended && device_may_wakeup(tty_dev)) { + if (irqd_is_wakeup_set(irq_get_irq_data((uport->irq)))) + disable_irq_wake(uport->irq); + put_device(tty_dev); + mutex_unlock(&port->mutex); + return 0; + } + put_device(tty_dev); + uport->suspended = 0; + + /* + * Re-enable the console device after suspending. + */ + if (uart_console(uport)) { + /* + * First try to use the console cflag setting. + */ + memset(&termios, 0, sizeof(struct ktermios)); + termios.c_cflag = uport->cons->cflag; + termios.c_ispeed = uport->cons->ispeed; + termios.c_ospeed = uport->cons->ospeed; + + /* + * If that's unset, use the tty termios setting. + */ + if (port->tty && termios.c_cflag == 0) + termios = port->tty->termios; + + if (console_suspend_enabled) + uart_change_pm(state, UART_PM_STATE_ON); + uport->ops->set_termios(uport, &termios, NULL); + if (console_suspend_enabled) + console_start(uport->cons); + } + + if (tty_port_suspended(port)) { + const struct uart_ops *ops = uport->ops; + int ret; + + uart_change_pm(state, UART_PM_STATE_ON); + spin_lock_irq(&uport->lock); + if (!(uport->rs485.flags & SER_RS485_ENABLED)) + ops->set_mctrl(uport, 0); + spin_unlock_irq(&uport->lock); + if (console_suspend_enabled || !uart_console(uport)) { + /* Protected by port mutex for now */ + struct tty_struct *tty = port->tty; + + ret = ops->startup(uport); + if (ret == 0) { + if (tty) + uart_change_speed(tty, state, NULL); + spin_lock_irq(&uport->lock); + if (!(uport->rs485.flags & SER_RS485_ENABLED)) + ops->set_mctrl(uport, uport->mctrl); + else + uport->rs485_config(uport, &uport->rs485); + ops->start_tx(uport); + spin_unlock_irq(&uport->lock); + tty_port_set_initialized(port, 1); + } else { + /* + * Failed to resume - maybe hardware went away? + * Clear the "initialized" flag so we won't try + * to call the low level drivers shutdown method. + */ + uart_shutdown(tty, state); + } + } + + tty_port_set_suspended(port, 0); + } + + mutex_unlock(&port->mutex); + + return 0; +} + +static inline void +uart_report_port(struct uart_driver *drv, struct uart_port *port) +{ + char address[64]; + + switch (port->iotype) { + case UPIO_PORT: + snprintf(address, sizeof(address), "I/O 0x%lx", port->iobase); + break; + case UPIO_HUB6: + snprintf(address, sizeof(address), + "I/O 0x%lx offset 0x%x", port->iobase, port->hub6); + break; + case UPIO_MEM: + case UPIO_MEM16: + case UPIO_MEM32: + case UPIO_MEM32BE: + case UPIO_AU: + case UPIO_TSI: + snprintf(address, sizeof(address), + "MMIO 0x%llx", (unsigned long long)port->mapbase); + break; + default: + strlcpy(address, "*unknown*", sizeof(address)); + break; + } + + pr_info("%s%s%s at %s (irq = %d, base_baud = %d) is a %s\n", + port->dev ? dev_name(port->dev) : "", + port->dev ? ": " : "", + port->name, + address, port->irq, port->uartclk / 16, uart_type(port)); +} + +static void +uart_configure_port(struct uart_driver *drv, struct uart_state *state, + struct uart_port *port) +{ + unsigned int flags; + + /* + * If there isn't a port here, don't do anything further. + */ + if (!port->iobase && !port->mapbase && !port->membase) + return; + + /* + * Now do the auto configuration stuff. Note that config_port + * is expected to claim the resources and map the port for us. + */ + flags = 0; + if (port->flags & UPF_AUTO_IRQ) + flags |= UART_CONFIG_IRQ; + if (port->flags & UPF_BOOT_AUTOCONF) { + if (!(port->flags & UPF_FIXED_TYPE)) { + port->type = PORT_UNKNOWN; + flags |= UART_CONFIG_TYPE; + } + port->ops->config_port(port, flags); + } + + if (port->type != PORT_UNKNOWN) { + unsigned long flags; + + uart_report_port(drv, port); + + /* Power up port for set_mctrl() */ + uart_change_pm(state, UART_PM_STATE_ON); + + /* + * Ensure that the modem control lines are de-activated. + * keep the DTR setting that is set in uart_set_options() + * We probably don't need a spinlock around this, but + */ + spin_lock_irqsave(&port->lock, flags); + port->mctrl &= TIOCM_DTR; + if (!(port->rs485.flags & SER_RS485_ENABLED)) + port->ops->set_mctrl(port, port->mctrl); + else + port->rs485_config(port, &port->rs485); + spin_unlock_irqrestore(&port->lock, flags); + + /* + * If this driver supports console, and it hasn't been + * successfully registered yet, try to re-register it. + * It may be that the port was not available. + */ + if (port->cons && !(port->cons->flags & CON_ENABLED)) + register_console(port->cons); + + /* + * Power down all ports by default, except the + * console if we have one. + */ + if (!uart_console(port)) + uart_change_pm(state, UART_PM_STATE_OFF); + } +} + +#ifdef CONFIG_CONSOLE_POLL + +static int uart_poll_init(struct tty_driver *driver, int line, char *options) +{ + struct uart_driver *drv = driver->driver_state; + struct uart_state *state = drv->state + line; + struct tty_port *tport; + struct uart_port *port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + int ret = 0; + + tport = &state->port; + mutex_lock(&tport->mutex); + + port = uart_port_check(state); + if (!port || !(port->ops->poll_get_char && port->ops->poll_put_char)) { + ret = -1; + goto out; + } + + if (port->ops->poll_init) { + /* + * We don't set initialized as we only initialized the hw, + * e.g. state->xmit is still uninitialized. + */ + if (!tty_port_initialized(tport)) + ret = port->ops->poll_init(port); + } + + if (!ret && options) { + uart_parse_options(options, &baud, &parity, &bits, &flow); + ret = uart_set_options(port, NULL, baud, parity, bits, flow); + } +out: + mutex_unlock(&tport->mutex); + return ret; +} + +static int uart_poll_get_char(struct tty_driver *driver, int line) +{ + struct uart_driver *drv = driver->driver_state; + struct uart_state *state = drv->state + line; + struct uart_port *port; + int ret = -1; + + port = uart_port_ref(state); + if (port) { + ret = port->ops->poll_get_char(port); + uart_port_deref(port); + } + + return ret; +} + +static void uart_poll_put_char(struct tty_driver *driver, int line, char ch) +{ + struct uart_driver *drv = driver->driver_state; + struct uart_state *state = drv->state + line; + struct uart_port *port; + + port = uart_port_ref(state); + if (!port) + return; + + if (ch == '\n') + port->ops->poll_put_char(port, '\r'); + port->ops->poll_put_char(port, ch); + uart_port_deref(port); +} +#endif + +static const struct tty_operations uart_ops = { + .install = uart_install, + .open = uart_open, + .close = uart_close, + .write = uart_write, + .put_char = uart_put_char, + .flush_chars = uart_flush_chars, + .write_room = uart_write_room, + .chars_in_buffer= uart_chars_in_buffer, + .flush_buffer = uart_flush_buffer, + .ioctl = uart_ioctl, + .throttle = uart_throttle, + .unthrottle = uart_unthrottle, + .send_xchar = uart_send_xchar, + .set_termios = uart_set_termios, + .set_ldisc = uart_set_ldisc, + .stop = uart_stop, + .start = uart_start, + .hangup = uart_hangup, + .break_ctl = uart_break_ctl, + .wait_until_sent= uart_wait_until_sent, +#ifdef CONFIG_PROC_FS + .proc_show = uart_proc_show, +#endif + .tiocmget = uart_tiocmget, + .tiocmset = uart_tiocmset, + .set_serial = uart_set_info_user, + .get_serial = uart_get_info_user, + .get_icount = uart_get_icount, +#ifdef CONFIG_CONSOLE_POLL + .poll_init = uart_poll_init, + .poll_get_char = uart_poll_get_char, + .poll_put_char = uart_poll_put_char, +#endif +}; + +static const struct tty_port_operations uart_port_ops = { + .carrier_raised = uart_carrier_raised, + .dtr_rts = uart_dtr_rts, + .activate = uart_port_activate, + .shutdown = uart_tty_port_shutdown, +}; + +/** + * uart_register_driver - register a driver with the uart core layer + * @drv: low level driver structure + * + * Register a uart driver with the core driver. We in turn register + * with the tty layer, and initialise the core driver per-port state. + * + * We have a proc file in /proc/tty/driver which is named after the + * normal driver. + * + * drv->port should be NULL, and the per-port structures should be + * registered using uart_add_one_port after this call has succeeded. + */ +int uart_register_driver(struct uart_driver *drv) +{ + struct tty_driver *normal; + int i, retval = -ENOMEM; + + BUG_ON(drv->state); + + /* + * Maybe we should be using a slab cache for this, especially if + * we have a large number of ports to handle. + */ + drv->state = kcalloc(drv->nr, sizeof(struct uart_state), GFP_KERNEL); + if (!drv->state) + goto out; + + normal = alloc_tty_driver(drv->nr); + if (!normal) + goto out_kfree; + + drv->tty_driver = normal; + + normal->driver_name = drv->driver_name; + normal->name = drv->dev_name; + normal->major = drv->major; + normal->minor_start = drv->minor; + normal->type = TTY_DRIVER_TYPE_SERIAL; + normal->subtype = SERIAL_TYPE_NORMAL; + normal->init_termios = tty_std_termios; + normal->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; + normal->init_termios.c_ispeed = normal->init_termios.c_ospeed = 9600; + normal->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; + normal->driver_state = drv; + tty_set_operations(normal, &uart_ops); + + /* + * Initialise the UART state(s). + */ + for (i = 0; i < drv->nr; i++) { + struct uart_state *state = drv->state + i; + struct tty_port *port = &state->port; + + tty_port_init(port); + port->ops = &uart_port_ops; + } + + retval = tty_register_driver(normal); + if (retval >= 0) + return retval; + + for (i = 0; i < drv->nr; i++) + tty_port_destroy(&drv->state[i].port); + put_tty_driver(normal); +out_kfree: + kfree(drv->state); +out: + return retval; +} + +/** + * uart_unregister_driver - remove a driver from the uart core layer + * @drv: low level driver structure + * + * Remove all references to a driver from the core driver. The low + * level driver must have removed all its ports via the + * uart_remove_one_port() if it registered them with uart_add_one_port(). + * (ie, drv->port == NULL) + */ +void uart_unregister_driver(struct uart_driver *drv) +{ + struct tty_driver *p = drv->tty_driver; + unsigned int i; + + tty_unregister_driver(p); + put_tty_driver(p); + for (i = 0; i < drv->nr; i++) + tty_port_destroy(&drv->state[i].port); + kfree(drv->state); + drv->state = NULL; + drv->tty_driver = NULL; +} + +struct tty_driver *uart_console_device(struct console *co, int *index) +{ + struct uart_driver *p = co->data; + *index = co->index; + return p->tty_driver; +} +EXPORT_SYMBOL_GPL(uart_console_device); + +static ssize_t uartclk_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct serial_struct tmp; + struct tty_port *port = dev_get_drvdata(dev); + + uart_get_info(port, &tmp); + return sprintf(buf, "%d\n", tmp.baud_base * 16); +} + +static ssize_t type_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct serial_struct tmp; + struct tty_port *port = dev_get_drvdata(dev); + + uart_get_info(port, &tmp); + return sprintf(buf, "%d\n", tmp.type); +} + +static ssize_t line_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct serial_struct tmp; + struct tty_port *port = dev_get_drvdata(dev); + + uart_get_info(port, &tmp); + return sprintf(buf, "%d\n", tmp.line); +} + +static ssize_t port_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct serial_struct tmp; + struct tty_port *port = dev_get_drvdata(dev); + unsigned long ioaddr; + + uart_get_info(port, &tmp); + ioaddr = tmp.port; + if (HIGH_BITS_OFFSET) + ioaddr |= (unsigned long)tmp.port_high << HIGH_BITS_OFFSET; + return sprintf(buf, "0x%lX\n", ioaddr); +} + +static ssize_t irq_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct serial_struct tmp; + struct tty_port *port = dev_get_drvdata(dev); + + uart_get_info(port, &tmp); + return sprintf(buf, "%d\n", tmp.irq); +} + +static ssize_t flags_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct serial_struct tmp; + struct tty_port *port = dev_get_drvdata(dev); + + uart_get_info(port, &tmp); + return sprintf(buf, "0x%X\n", tmp.flags); +} + +static ssize_t xmit_fifo_size_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct serial_struct tmp; + struct tty_port *port = dev_get_drvdata(dev); + + uart_get_info(port, &tmp); + return sprintf(buf, "%d\n", tmp.xmit_fifo_size); +} + +static ssize_t close_delay_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct serial_struct tmp; + struct tty_port *port = dev_get_drvdata(dev); + + uart_get_info(port, &tmp); + return sprintf(buf, "%d\n", tmp.close_delay); +} + +static ssize_t closing_wait_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct serial_struct tmp; + struct tty_port *port = dev_get_drvdata(dev); + + uart_get_info(port, &tmp); + return sprintf(buf, "%d\n", tmp.closing_wait); +} + +static ssize_t custom_divisor_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct serial_struct tmp; + struct tty_port *port = dev_get_drvdata(dev); + + uart_get_info(port, &tmp); + return sprintf(buf, "%d\n", tmp.custom_divisor); +} + +static ssize_t io_type_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct serial_struct tmp; + struct tty_port *port = dev_get_drvdata(dev); + + uart_get_info(port, &tmp); + return sprintf(buf, "%d\n", tmp.io_type); +} + +static ssize_t iomem_base_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct serial_struct tmp; + struct tty_port *port = dev_get_drvdata(dev); + + uart_get_info(port, &tmp); + return sprintf(buf, "0x%lX\n", (unsigned long)tmp.iomem_base); +} + +static ssize_t iomem_reg_shift_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct serial_struct tmp; + struct tty_port *port = dev_get_drvdata(dev); + + uart_get_info(port, &tmp); + return sprintf(buf, "%d\n", tmp.iomem_reg_shift); +} + +static ssize_t console_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct tty_port *port = dev_get_drvdata(dev); + struct uart_state *state = container_of(port, struct uart_state, port); + struct uart_port *uport; + bool console = false; + + mutex_lock(&port->mutex); + uport = uart_port_check(state); + if (uport) + console = uart_console_enabled(uport); + mutex_unlock(&port->mutex); + + return sprintf(buf, "%c\n", console ? 'Y' : 'N'); +} + +static ssize_t console_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct tty_port *port = dev_get_drvdata(dev); + struct uart_state *state = container_of(port, struct uart_state, port); + struct uart_port *uport; + bool oldconsole, newconsole; + int ret; + + ret = kstrtobool(buf, &newconsole); + if (ret) + return ret; + + mutex_lock(&port->mutex); + uport = uart_port_check(state); + if (uport) { + oldconsole = uart_console_enabled(uport); + if (oldconsole && !newconsole) { + ret = unregister_console(uport->cons); + } else if (!oldconsole && newconsole) { + if (uart_console(uport)) { + uport->console_reinit = 1; + register_console(uport->cons); + } else { + ret = -ENOENT; + } + } + } else { + ret = -ENXIO; + } + mutex_unlock(&port->mutex); + + return ret < 0 ? ret : count; +} + +static DEVICE_ATTR_RO(uartclk); +static DEVICE_ATTR_RO(type); +static DEVICE_ATTR_RO(line); +static DEVICE_ATTR_RO(port); +static DEVICE_ATTR_RO(irq); +static DEVICE_ATTR_RO(flags); +static DEVICE_ATTR_RO(xmit_fifo_size); +static DEVICE_ATTR_RO(close_delay); +static DEVICE_ATTR_RO(closing_wait); +static DEVICE_ATTR_RO(custom_divisor); +static DEVICE_ATTR_RO(io_type); +static DEVICE_ATTR_RO(iomem_base); +static DEVICE_ATTR_RO(iomem_reg_shift); +static DEVICE_ATTR_RW(console); + +static struct attribute *tty_dev_attrs[] = { + &dev_attr_uartclk.attr, + &dev_attr_type.attr, + &dev_attr_line.attr, + &dev_attr_port.attr, + &dev_attr_irq.attr, + &dev_attr_flags.attr, + &dev_attr_xmit_fifo_size.attr, + &dev_attr_close_delay.attr, + &dev_attr_closing_wait.attr, + &dev_attr_custom_divisor.attr, + &dev_attr_io_type.attr, + &dev_attr_iomem_base.attr, + &dev_attr_iomem_reg_shift.attr, + &dev_attr_console.attr, + NULL +}; + +static const struct attribute_group tty_dev_attr_group = { + .attrs = tty_dev_attrs, +}; + +/** + * uart_add_one_port - attach a driver-defined port structure + * @drv: pointer to the uart low level driver structure for this port + * @uport: uart port structure to use for this port. + * + * This allows the driver to register its own uart_port structure + * with the core driver. The main purpose is to allow the low + * level uart drivers to expand uart_port, rather than having yet + * more levels of structures. + */ +int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport) +{ + struct uart_state *state; + struct tty_port *port; + int ret = 0; + struct device *tty_dev; + int num_groups; + + BUG_ON(in_interrupt()); + + if (uport->line >= drv->nr) + return -EINVAL; + + state = drv->state + uport->line; + port = &state->port; + + mutex_lock(&port_mutex); + mutex_lock(&port->mutex); + if (state->uart_port) { + ret = -EINVAL; + goto out; + } + + /* Link the port to the driver state table and vice versa */ + atomic_set(&state->refcount, 1); + init_waitqueue_head(&state->remove_wait); + state->uart_port = uport; + uport->state = state; + + state->pm_state = UART_PM_STATE_UNDEFINED; + uport->cons = drv->cons; + uport->minor = drv->tty_driver->minor_start + uport->line; + uport->name = kasprintf(GFP_KERNEL, "%s%d", drv->dev_name, + drv->tty_driver->name_base + uport->line); + if (!uport->name) { + ret = -ENOMEM; + goto out; + } + + /* + * If this port is in use as a console then the spinlock is already + * initialised. + */ + if (!uart_console_enabled(uport)) + uart_port_spin_lock_init(uport); + + if (uport->cons && uport->dev) + of_console_check(uport->dev->of_node, uport->cons->name, uport->line); + + tty_port_link_device(port, drv->tty_driver, uport->line); + uart_configure_port(drv, state, uport); + + port->console = uart_console(uport); + + num_groups = 2; + if (uport->attr_group) + num_groups++; + + uport->tty_groups = kcalloc(num_groups, sizeof(*uport->tty_groups), + GFP_KERNEL); + if (!uport->tty_groups) { + ret = -ENOMEM; + goto out; + } + uport->tty_groups[0] = &tty_dev_attr_group; + if (uport->attr_group) + uport->tty_groups[1] = uport->attr_group; + + /* + * Register the port whether it's detected or not. This allows + * setserial to be used to alter this port's parameters. + */ + tty_dev = tty_port_register_device_attr_serdev(port, drv->tty_driver, + uport->line, uport->dev, port, uport->tty_groups); + if (!IS_ERR(tty_dev)) { + device_set_wakeup_capable(tty_dev, 1); + } else { + dev_err(uport->dev, "Cannot register tty device on line %d\n", + uport->line); + } + + /* + * Ensure UPF_DEAD is not set. + */ + uport->flags &= ~UPF_DEAD; + + out: + mutex_unlock(&port->mutex); + mutex_unlock(&port_mutex); + + return ret; +} + +/** + * uart_remove_one_port - detach a driver defined port structure + * @drv: pointer to the uart low level driver structure for this port + * @uport: uart port structure for this port + * + * This unhooks (and hangs up) the specified port structure from the + * core driver. No further calls will be made to the low-level code + * for this port. + */ +int uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport) +{ + struct uart_state *state = drv->state + uport->line; + struct tty_port *port = &state->port; + struct uart_port *uart_port; + struct tty_struct *tty; + int ret = 0; + + BUG_ON(in_interrupt()); + + mutex_lock(&port_mutex); + + /* + * Mark the port "dead" - this prevents any opens from + * succeeding while we shut down the port. + */ + mutex_lock(&port->mutex); + uart_port = uart_port_check(state); + if (uart_port != uport) + dev_alert(uport->dev, "Removing wrong port: %p != %p\n", + uart_port, uport); + + if (!uart_port) { + mutex_unlock(&port->mutex); + ret = -EINVAL; + goto out; + } + uport->flags |= UPF_DEAD; + mutex_unlock(&port->mutex); + + /* + * Remove the devices from the tty layer + */ + tty_port_unregister_device(port, drv->tty_driver, uport->line); + + tty = tty_port_tty_get(port); + if (tty) { + tty_vhangup(port->tty); + tty_kref_put(tty); + } + + /* + * If the port is used as a console, unregister it + */ + if (uart_console(uport)) + unregister_console(uport->cons); + + /* + * Free the port IO and memory resources, if any. + */ + if (uport->type != PORT_UNKNOWN && uport->ops->release_port) + uport->ops->release_port(uport); + kfree(uport->tty_groups); + kfree(uport->name); + + /* + * Indicate that there isn't a port here anymore. + */ + uport->type = PORT_UNKNOWN; + + mutex_lock(&port->mutex); + WARN_ON(atomic_dec_return(&state->refcount) < 0); + wait_event(state->remove_wait, !atomic_read(&state->refcount)); + state->uart_port = NULL; + mutex_unlock(&port->mutex); +out: + mutex_unlock(&port_mutex); + + return ret; +} + +/* + * Are the two ports equivalent? + */ +int uart_match_port(struct uart_port *port1, struct uart_port *port2) +{ + if (port1->iotype != port2->iotype) + return 0; + + switch (port1->iotype) { + case UPIO_PORT: + return (port1->iobase == port2->iobase); + case UPIO_HUB6: + return (port1->iobase == port2->iobase) && + (port1->hub6 == port2->hub6); + case UPIO_MEM: + case UPIO_MEM16: + case UPIO_MEM32: + case UPIO_MEM32BE: + case UPIO_AU: + case UPIO_TSI: + return (port1->mapbase == port2->mapbase); + } + return 0; +} +EXPORT_SYMBOL(uart_match_port); + +/** + * uart_handle_dcd_change - handle a change of carrier detect state + * @uport: uart_port structure for the open port + * @status: new carrier detect status, nonzero if active + * + * Caller must hold uport->lock + */ +void uart_handle_dcd_change(struct uart_port *uport, unsigned int status) +{ + struct tty_port *port = &uport->state->port; + struct tty_struct *tty = port->tty; + struct tty_ldisc *ld; + + lockdep_assert_held_once(&uport->lock); + + if (tty) { + ld = tty_ldisc_ref(tty); + if (ld) { + if (ld->ops->dcd_change) + ld->ops->dcd_change(tty, status); + tty_ldisc_deref(ld); + } + } + + uport->icount.dcd++; + + if (uart_dcd_enabled(uport)) { + if (status) + wake_up_interruptible(&port->open_wait); + else if (tty) + tty_hangup(tty); + } +} +EXPORT_SYMBOL_GPL(uart_handle_dcd_change); + +/** + * uart_handle_cts_change - handle a change of clear-to-send state + * @uport: uart_port structure for the open port + * @status: new clear to send status, nonzero if active + * + * Caller must hold uport->lock + */ +void uart_handle_cts_change(struct uart_port *uport, unsigned int status) +{ + lockdep_assert_held_once(&uport->lock); + + uport->icount.cts++; + + if (uart_softcts_mode(uport)) { + if (uport->hw_stopped) { + if (status) { + uport->hw_stopped = 0; + uport->ops->start_tx(uport); + uart_write_wakeup(uport); + } + } else { + if (!status) { + uport->hw_stopped = 1; + uport->ops->stop_tx(uport); + } + } + + } +} +EXPORT_SYMBOL_GPL(uart_handle_cts_change); + +/** + * uart_insert_char - push a char to the uart layer + * + * User is responsible to call tty_flip_buffer_push when they are done with + * insertion. + * + * @port: corresponding port + * @status: state of the serial port RX buffer (LSR for 8250) + * @overrun: mask of overrun bits in @status + * @ch: character to push + * @flag: flag for the character (see TTY_NORMAL and friends) + */ +void uart_insert_char(struct uart_port *port, unsigned int status, + unsigned int overrun, unsigned int ch, unsigned int flag) +{ + struct tty_port *tport = &port->state->port; + + if ((status & port->ignore_status_mask & ~overrun) == 0) + if (tty_insert_flip_char(tport, ch, flag) == 0) + ++port->icount.buf_overrun; + + /* + * Overrun is special. Since it's reported immediately, + * it doesn't affect the current character. + */ + if (status & ~port->ignore_status_mask & overrun) + if (tty_insert_flip_char(tport, 0, TTY_OVERRUN) == 0) + ++port->icount.buf_overrun; +} +EXPORT_SYMBOL_GPL(uart_insert_char); + +#ifdef CONFIG_MAGIC_SYSRQ_SERIAL +static const char sysrq_toggle_seq[] = CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE; + +static void uart_sysrq_on(struct work_struct *w) +{ + int sysrq_toggle_seq_len = strlen(sysrq_toggle_seq); + + sysrq_toggle_support(1); + pr_info("SysRq is enabled by magic sequence '%*pE' on serial\n", + sysrq_toggle_seq_len, sysrq_toggle_seq); +} +static DECLARE_WORK(sysrq_enable_work, uart_sysrq_on); + +/** + * uart_try_toggle_sysrq - Enables SysRq from serial line + * @port: uart_port structure where char(s) after BREAK met + * @ch: new character in the sequence after received BREAK + * + * Enables magic SysRq when the required sequence is met on port + * (see CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE). + * + * Returns false if @ch is out of enabling sequence and should be + * handled some other way, true if @ch was consumed. + */ +bool uart_try_toggle_sysrq(struct uart_port *port, unsigned int ch) +{ + int sysrq_toggle_seq_len = strlen(sysrq_toggle_seq); + + if (!sysrq_toggle_seq_len) + return false; + + BUILD_BUG_ON(ARRAY_SIZE(sysrq_toggle_seq) >= U8_MAX); + if (sysrq_toggle_seq[port->sysrq_seq] != ch) { + port->sysrq_seq = 0; + return false; + } + + if (++port->sysrq_seq < sysrq_toggle_seq_len) { + port->sysrq = jiffies + SYSRQ_TIMEOUT; + return true; + } + + schedule_work(&sysrq_enable_work); + + port->sysrq = 0; + return true; +} +EXPORT_SYMBOL_GPL(uart_try_toggle_sysrq); +#endif + +EXPORT_SYMBOL(uart_write_wakeup); +EXPORT_SYMBOL(uart_register_driver); +EXPORT_SYMBOL(uart_unregister_driver); +EXPORT_SYMBOL(uart_suspend_port); +EXPORT_SYMBOL(uart_resume_port); +EXPORT_SYMBOL(uart_add_one_port); +EXPORT_SYMBOL(uart_remove_one_port); + +/** + * uart_get_rs485_mode() - retrieve rs485 properties for given uart + * @port: uart device's target port + * + * This function implements the device tree binding described in + * Documentation/devicetree/bindings/serial/rs485.txt. + */ +int uart_get_rs485_mode(struct uart_port *port) +{ + struct serial_rs485 *rs485conf = &port->rs485; + struct device *dev = port->dev; + u32 rs485_delay[2]; + int ret; + + ret = device_property_read_u32_array(dev, "rs485-rts-delay", + rs485_delay, 2); + if (!ret) { + rs485conf->delay_rts_before_send = rs485_delay[0]; + rs485conf->delay_rts_after_send = rs485_delay[1]; + } else { + rs485conf->delay_rts_before_send = 0; + rs485conf->delay_rts_after_send = 0; + } + + /* + * Clear full-duplex and enabled flags, set RTS polarity to active high + * to get to a defined state with the following properties: + */ + rs485conf->flags &= ~(SER_RS485_RX_DURING_TX | SER_RS485_ENABLED | + SER_RS485_TERMINATE_BUS | + SER_RS485_RTS_AFTER_SEND); + rs485conf->flags |= SER_RS485_RTS_ON_SEND; + + if (device_property_read_bool(dev, "rs485-rx-during-tx")) + rs485conf->flags |= SER_RS485_RX_DURING_TX; + + if (device_property_read_bool(dev, "linux,rs485-enabled-at-boot-time")) + rs485conf->flags |= SER_RS485_ENABLED; + + if (device_property_read_bool(dev, "rs485-rts-active-low")) { + rs485conf->flags &= ~SER_RS485_RTS_ON_SEND; + rs485conf->flags |= SER_RS485_RTS_AFTER_SEND; + } + + /* + * Disabling termination by default is the safe choice: Else if many + * bus participants enable it, no communication is possible at all. + * Works fine for short cables and users may enable for longer cables. + */ + port->rs485_term_gpio = devm_gpiod_get_optional(dev, "rs485-term", + GPIOD_OUT_LOW); + if (IS_ERR(port->rs485_term_gpio)) { + ret = PTR_ERR(port->rs485_term_gpio); + port->rs485_term_gpio = NULL; + return dev_err_probe(dev, ret, "Cannot get rs485-term-gpios\n"); + } + + return 0; +} +EXPORT_SYMBOL_GPL(uart_get_rs485_mode); + +MODULE_DESCRIPTION("Serial driver core"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/serial_mctrl_gpio.c b/drivers/tty/serial/serial_mctrl_gpio.c new file mode 100644 index 000000000..fb4781292 --- /dev/null +++ b/drivers/tty/serial/serial_mctrl_gpio.c @@ -0,0 +1,302 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Helpers for controlling modem lines via GPIO + * + * Copyright (C) 2014 Paratronic S.A. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "serial_mctrl_gpio.h" + +struct mctrl_gpios { + struct uart_port *port; + struct gpio_desc *gpio[UART_GPIO_MAX]; + int irq[UART_GPIO_MAX]; + unsigned int mctrl_prev; + bool mctrl_on; +}; + +static const struct { + const char *name; + unsigned int mctrl; + enum gpiod_flags flags; +} mctrl_gpios_desc[UART_GPIO_MAX] = { + { "cts", TIOCM_CTS, GPIOD_IN, }, + { "dsr", TIOCM_DSR, GPIOD_IN, }, + { "dcd", TIOCM_CD, GPIOD_IN, }, + { "rng", TIOCM_RNG, GPIOD_IN, }, + { "rts", TIOCM_RTS, GPIOD_OUT_LOW, }, + { "dtr", TIOCM_DTR, GPIOD_OUT_LOW, }, +}; + +static bool mctrl_gpio_flags_is_dir_out(unsigned int idx) +{ + return mctrl_gpios_desc[idx].flags & GPIOD_FLAGS_BIT_DIR_OUT; +} + +void mctrl_gpio_set(struct mctrl_gpios *gpios, unsigned int mctrl) +{ + enum mctrl_gpio_idx i; + struct gpio_desc *desc_array[UART_GPIO_MAX]; + DECLARE_BITMAP(values, UART_GPIO_MAX); + unsigned int count = 0; + + if (gpios == NULL) + return; + + for (i = 0; i < UART_GPIO_MAX; i++) + if (gpios->gpio[i] && mctrl_gpio_flags_is_dir_out(i)) { + desc_array[count] = gpios->gpio[i]; + __assign_bit(count, values, + mctrl & mctrl_gpios_desc[i].mctrl); + count++; + } + gpiod_set_array_value(count, desc_array, NULL, values); +} +EXPORT_SYMBOL_GPL(mctrl_gpio_set); + +struct gpio_desc *mctrl_gpio_to_gpiod(struct mctrl_gpios *gpios, + enum mctrl_gpio_idx gidx) +{ + if (gpios == NULL) + return NULL; + + return gpios->gpio[gidx]; +} +EXPORT_SYMBOL_GPL(mctrl_gpio_to_gpiod); + +unsigned int mctrl_gpio_get(struct mctrl_gpios *gpios, unsigned int *mctrl) +{ + enum mctrl_gpio_idx i; + + if (gpios == NULL) + return *mctrl; + + for (i = 0; i < UART_GPIO_MAX; i++) { + if (gpios->gpio[i] && !mctrl_gpio_flags_is_dir_out(i)) { + if (gpiod_get_value(gpios->gpio[i])) + *mctrl |= mctrl_gpios_desc[i].mctrl; + else + *mctrl &= ~mctrl_gpios_desc[i].mctrl; + } + } + + return *mctrl; +} +EXPORT_SYMBOL_GPL(mctrl_gpio_get); + +unsigned int +mctrl_gpio_get_outputs(struct mctrl_gpios *gpios, unsigned int *mctrl) +{ + enum mctrl_gpio_idx i; + + if (gpios == NULL) + return *mctrl; + + for (i = 0; i < UART_GPIO_MAX; i++) { + if (gpios->gpio[i] && mctrl_gpio_flags_is_dir_out(i)) { + if (gpiod_get_value(gpios->gpio[i])) + *mctrl |= mctrl_gpios_desc[i].mctrl; + else + *mctrl &= ~mctrl_gpios_desc[i].mctrl; + } + } + + return *mctrl; +} +EXPORT_SYMBOL_GPL(mctrl_gpio_get_outputs); + +struct mctrl_gpios *mctrl_gpio_init_noauto(struct device *dev, unsigned int idx) +{ + struct mctrl_gpios *gpios; + enum mctrl_gpio_idx i; + + gpios = devm_kzalloc(dev, sizeof(*gpios), GFP_KERNEL); + if (!gpios) + return ERR_PTR(-ENOMEM); + + for (i = 0; i < UART_GPIO_MAX; i++) { + char *gpio_str; + bool present; + + /* Check if GPIO property exists and continue if not */ + gpio_str = kasprintf(GFP_KERNEL, "%s-gpios", + mctrl_gpios_desc[i].name); + if (!gpio_str) + continue; + + present = device_property_present(dev, gpio_str); + kfree(gpio_str); + if (!present) + continue; + + gpios->gpio[i] = + devm_gpiod_get_index_optional(dev, + mctrl_gpios_desc[i].name, + idx, + mctrl_gpios_desc[i].flags); + + if (IS_ERR(gpios->gpio[i])) + return ERR_CAST(gpios->gpio[i]); + } + + return gpios; +} +EXPORT_SYMBOL_GPL(mctrl_gpio_init_noauto); + +#define MCTRL_ANY_DELTA (TIOCM_RI | TIOCM_DSR | TIOCM_CD | TIOCM_CTS) +static irqreturn_t mctrl_gpio_irq_handle(int irq, void *context) +{ + struct mctrl_gpios *gpios = context; + struct uart_port *port = gpios->port; + u32 mctrl = gpios->mctrl_prev; + u32 mctrl_diff; + unsigned long flags; + + mctrl_gpio_get(gpios, &mctrl); + + spin_lock_irqsave(&port->lock, flags); + + mctrl_diff = mctrl ^ gpios->mctrl_prev; + gpios->mctrl_prev = mctrl; + + if (mctrl_diff & MCTRL_ANY_DELTA && port->state != NULL) { + if ((mctrl_diff & mctrl) & TIOCM_RI) + port->icount.rng++; + + if ((mctrl_diff & mctrl) & TIOCM_DSR) + port->icount.dsr++; + + if (mctrl_diff & TIOCM_CD) + uart_handle_dcd_change(port, mctrl & TIOCM_CD); + + if (mctrl_diff & TIOCM_CTS) + uart_handle_cts_change(port, mctrl & TIOCM_CTS); + + wake_up_interruptible(&port->state->port.delta_msr_wait); + } + + spin_unlock_irqrestore(&port->lock, flags); + + return IRQ_HANDLED; +} + +struct mctrl_gpios *mctrl_gpio_init(struct uart_port *port, unsigned int idx) +{ + struct mctrl_gpios *gpios; + enum mctrl_gpio_idx i; + + gpios = mctrl_gpio_init_noauto(port->dev, idx); + if (IS_ERR(gpios)) + return gpios; + + gpios->port = port; + + for (i = 0; i < UART_GPIO_MAX; ++i) { + int ret; + + if (!gpios->gpio[i] || mctrl_gpio_flags_is_dir_out(i)) + continue; + + ret = gpiod_to_irq(gpios->gpio[i]); + if (ret <= 0) { + dev_err(port->dev, + "failed to find corresponding irq for %s (idx=%d, err=%d)\n", + mctrl_gpios_desc[i].name, idx, ret); + return ERR_PTR(ret); + } + gpios->irq[i] = ret; + + /* irqs should only be enabled in .enable_ms */ + irq_set_status_flags(gpios->irq[i], IRQ_NOAUTOEN); + + ret = devm_request_irq(port->dev, gpios->irq[i], + mctrl_gpio_irq_handle, + IRQ_TYPE_EDGE_BOTH, dev_name(port->dev), + gpios); + if (ret) { + /* alternatively implement polling */ + dev_err(port->dev, + "failed to request irq for %s (idx=%d, err=%d)\n", + mctrl_gpios_desc[i].name, idx, ret); + return ERR_PTR(ret); + } + } + + return gpios; +} +EXPORT_SYMBOL_GPL(mctrl_gpio_init); + +void mctrl_gpio_free(struct device *dev, struct mctrl_gpios *gpios) +{ + enum mctrl_gpio_idx i; + + if (gpios == NULL) + return; + + for (i = 0; i < UART_GPIO_MAX; i++) { + if (gpios->irq[i]) + devm_free_irq(gpios->port->dev, gpios->irq[i], gpios); + + if (gpios->gpio[i]) + devm_gpiod_put(dev, gpios->gpio[i]); + } + devm_kfree(dev, gpios); +} +EXPORT_SYMBOL_GPL(mctrl_gpio_free); + +void mctrl_gpio_enable_ms(struct mctrl_gpios *gpios) +{ + enum mctrl_gpio_idx i; + + if (gpios == NULL) + return; + + /* .enable_ms may be called multiple times */ + if (gpios->mctrl_on) + return; + + gpios->mctrl_on = true; + + /* get initial status of modem lines GPIOs */ + mctrl_gpio_get(gpios, &gpios->mctrl_prev); + + for (i = 0; i < UART_GPIO_MAX; ++i) { + if (!gpios->irq[i]) + continue; + + enable_irq(gpios->irq[i]); + } +} +EXPORT_SYMBOL_GPL(mctrl_gpio_enable_ms); + +void mctrl_gpio_disable_ms(struct mctrl_gpios *gpios) +{ + enum mctrl_gpio_idx i; + + if (gpios == NULL) + return; + + if (!gpios->mctrl_on) + return; + + gpios->mctrl_on = false; + + for (i = 0; i < UART_GPIO_MAX; ++i) { + if (!gpios->irq[i]) + continue; + + disable_irq(gpios->irq[i]); + } +} +EXPORT_SYMBOL_GPL(mctrl_gpio_disable_ms); + +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/serial_mctrl_gpio.h b/drivers/tty/serial/serial_mctrl_gpio.h new file mode 100644 index 000000000..b134a0ffc --- /dev/null +++ b/drivers/tty/serial/serial_mctrl_gpio.h @@ -0,0 +1,147 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Helpers for controlling modem lines via GPIO + * + * Copyright (C) 2014 Paratronic S.A. + */ + +#ifndef __SERIAL_MCTRL_GPIO__ +#define __SERIAL_MCTRL_GPIO__ + +#include +#include +#include + +struct uart_port; + +enum mctrl_gpio_idx { + UART_GPIO_CTS, + UART_GPIO_DSR, + UART_GPIO_DCD, + UART_GPIO_RNG, + UART_GPIO_RI = UART_GPIO_RNG, + UART_GPIO_RTS, + UART_GPIO_DTR, + UART_GPIO_MAX, +}; + +/* + * Opaque descriptor for modem lines controlled by GPIOs + */ +struct mctrl_gpios; + +#ifdef CONFIG_GPIOLIB + +/* + * Set state of the modem control output lines via GPIOs. + */ +void mctrl_gpio_set(struct mctrl_gpios *gpios, unsigned int mctrl); + +/* + * Get state of the modem control input lines from GPIOs. + * The mctrl flags are updated and returned. + */ +unsigned int mctrl_gpio_get(struct mctrl_gpios *gpios, unsigned int *mctrl); + +/* + * Get state of the modem control output lines from GPIOs. + * The mctrl flags are updated and returned. + */ +unsigned int +mctrl_gpio_get_outputs(struct mctrl_gpios *gpios, unsigned int *mctrl); + +/* + * Returns the associated struct gpio_desc to the modem line gidx + */ +struct gpio_desc *mctrl_gpio_to_gpiod(struct mctrl_gpios *gpios, + enum mctrl_gpio_idx gidx); + +/* + * Request and set direction of modem control line GPIOs and set up irq + * handling. + * devm_* functions are used, so there's no need to call mctrl_gpio_free(). + * Returns a pointer to the allocated mctrl structure if ok, -ENOMEM on + * allocation error. + */ +struct mctrl_gpios *mctrl_gpio_init(struct uart_port *port, unsigned int idx); + +/* + * Request and set direction of modem control line GPIOs. + * devm_* functions are used, so there's no need to call mctrl_gpio_free(). + * Returns a pointer to the allocated mctrl structure if ok, -ENOMEM on + * allocation error. + */ +struct mctrl_gpios *mctrl_gpio_init_noauto(struct device *dev, + unsigned int idx); + +/* + * Free the mctrl_gpios structure. + * Normally, this function will not be called, as the GPIOs will + * be disposed of by the resource management code. + */ +void mctrl_gpio_free(struct device *dev, struct mctrl_gpios *gpios); + +/* + * Enable gpio interrupts to report status line changes. + */ +void mctrl_gpio_enable_ms(struct mctrl_gpios *gpios); + +/* + * Disable gpio interrupts to report status line changes. + */ +void mctrl_gpio_disable_ms(struct mctrl_gpios *gpios); + +#else /* GPIOLIB */ + +static inline +void mctrl_gpio_set(struct mctrl_gpios *gpios, unsigned int mctrl) +{ +} + +static inline +unsigned int mctrl_gpio_get(struct mctrl_gpios *gpios, unsigned int *mctrl) +{ + return *mctrl; +} + +static inline unsigned int +mctrl_gpio_get_outputs(struct mctrl_gpios *gpios, unsigned int *mctrl) +{ + return *mctrl; +} + +static inline +struct gpio_desc *mctrl_gpio_to_gpiod(struct mctrl_gpios *gpios, + enum mctrl_gpio_idx gidx) +{ + return NULL; +} + +static inline +struct mctrl_gpios *mctrl_gpio_init(struct uart_port *port, unsigned int idx) +{ + return NULL; +} + +static inline +struct mctrl_gpios *mctrl_gpio_init_noauto(struct device *dev, unsigned int idx) +{ + return NULL; +} + +static inline +void mctrl_gpio_free(struct device *dev, struct mctrl_gpios *gpios) +{ +} + +static inline void mctrl_gpio_enable_ms(struct mctrl_gpios *gpios) +{ +} + +static inline void mctrl_gpio_disable_ms(struct mctrl_gpios *gpios) +{ +} + +#endif /* GPIOLIB */ + +#endif diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c new file mode 100644 index 000000000..7beec3310 --- /dev/null +++ b/drivers/tty/serial/serial_txx9.c @@ -0,0 +1,1326 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Derived from many drivers using generic_serial interface, + * especially serial_tx3912.c by Steven J. Hill and r39xx_serial.c + * (was in Linux/VR tree) by Jim Pick. + * + * Copyright (C) 1999 Harald Koerfgen + * Copyright (C) 2000 Jim Pick + * Copyright (C) 2001 Steven J. Hill (sjhill@realitydiluted.com) + * Copyright (C) 2000-2002 Toshiba Corporation + * + * Serial driver for TX3927/TX4927/TX4925/TX4938 internal SIO controller + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +static char *serial_version = "1.11"; +static char *serial_name = "TX39/49 Serial driver"; + +#define PASS_LIMIT 256 + +#if !defined(CONFIG_SERIAL_TXX9_STDSERIAL) +/* "ttyS" is used for standard serial driver */ +#define TXX9_TTY_NAME "ttyTX" +#define TXX9_TTY_MINOR_START 196 +#define TXX9_TTY_MAJOR 204 +#else +/* acts like standard serial driver */ +#define TXX9_TTY_NAME "ttyS" +#define TXX9_TTY_MINOR_START 64 +#define TXX9_TTY_MAJOR TTY_MAJOR +#endif + +/* flag aliases */ +#define UPF_TXX9_HAVE_CTS_LINE UPF_BUGGY_UART +#define UPF_TXX9_USE_SCLK UPF_MAGIC_MULTIPLIER + +#ifdef CONFIG_PCI +/* support for Toshiba TC86C001 SIO */ +#define ENABLE_SERIAL_TXX9_PCI +#endif + +/* + * Number of serial ports + */ +#define UART_NR CONFIG_SERIAL_TXX9_NR_UARTS + +struct uart_txx9_port { + struct uart_port port; + /* No additional info for now */ +}; + +#define TXX9_REGION_SIZE 0x24 + +/* TXX9 Serial Registers */ +#define TXX9_SILCR 0x00 +#define TXX9_SIDICR 0x04 +#define TXX9_SIDISR 0x08 +#define TXX9_SICISR 0x0c +#define TXX9_SIFCR 0x10 +#define TXX9_SIFLCR 0x14 +#define TXX9_SIBGR 0x18 +#define TXX9_SITFIFO 0x1c +#define TXX9_SIRFIFO 0x20 + +/* SILCR : Line Control */ +#define TXX9_SILCR_SCS_MASK 0x00000060 +#define TXX9_SILCR_SCS_IMCLK 0x00000000 +#define TXX9_SILCR_SCS_IMCLK_BG 0x00000020 +#define TXX9_SILCR_SCS_SCLK 0x00000040 +#define TXX9_SILCR_SCS_SCLK_BG 0x00000060 +#define TXX9_SILCR_UEPS 0x00000010 +#define TXX9_SILCR_UPEN 0x00000008 +#define TXX9_SILCR_USBL_MASK 0x00000004 +#define TXX9_SILCR_USBL_1BIT 0x00000000 +#define TXX9_SILCR_USBL_2BIT 0x00000004 +#define TXX9_SILCR_UMODE_MASK 0x00000003 +#define TXX9_SILCR_UMODE_8BIT 0x00000000 +#define TXX9_SILCR_UMODE_7BIT 0x00000001 + +/* SIDICR : DMA/Int. Control */ +#define TXX9_SIDICR_TDE 0x00008000 +#define TXX9_SIDICR_RDE 0x00004000 +#define TXX9_SIDICR_TIE 0x00002000 +#define TXX9_SIDICR_RIE 0x00001000 +#define TXX9_SIDICR_SPIE 0x00000800 +#define TXX9_SIDICR_CTSAC 0x00000600 +#define TXX9_SIDICR_STIE_MASK 0x0000003f +#define TXX9_SIDICR_STIE_OERS 0x00000020 +#define TXX9_SIDICR_STIE_CTSS 0x00000010 +#define TXX9_SIDICR_STIE_RBRKD 0x00000008 +#define TXX9_SIDICR_STIE_TRDY 0x00000004 +#define TXX9_SIDICR_STIE_TXALS 0x00000002 +#define TXX9_SIDICR_STIE_UBRKD 0x00000001 + +/* SIDISR : DMA/Int. Status */ +#define TXX9_SIDISR_UBRK 0x00008000 +#define TXX9_SIDISR_UVALID 0x00004000 +#define TXX9_SIDISR_UFER 0x00002000 +#define TXX9_SIDISR_UPER 0x00001000 +#define TXX9_SIDISR_UOER 0x00000800 +#define TXX9_SIDISR_ERI 0x00000400 +#define TXX9_SIDISR_TOUT 0x00000200 +#define TXX9_SIDISR_TDIS 0x00000100 +#define TXX9_SIDISR_RDIS 0x00000080 +#define TXX9_SIDISR_STIS 0x00000040 +#define TXX9_SIDISR_RFDN_MASK 0x0000001f + +/* SICISR : Change Int. Status */ +#define TXX9_SICISR_OERS 0x00000020 +#define TXX9_SICISR_CTSS 0x00000010 +#define TXX9_SICISR_RBRKD 0x00000008 +#define TXX9_SICISR_TRDY 0x00000004 +#define TXX9_SICISR_TXALS 0x00000002 +#define TXX9_SICISR_UBRKD 0x00000001 + +/* SIFCR : FIFO Control */ +#define TXX9_SIFCR_SWRST 0x00008000 +#define TXX9_SIFCR_RDIL_MASK 0x00000180 +#define TXX9_SIFCR_RDIL_1 0x00000000 +#define TXX9_SIFCR_RDIL_4 0x00000080 +#define TXX9_SIFCR_RDIL_8 0x00000100 +#define TXX9_SIFCR_RDIL_12 0x00000180 +#define TXX9_SIFCR_RDIL_MAX 0x00000180 +#define TXX9_SIFCR_TDIL_MASK 0x00000018 +#define TXX9_SIFCR_TDIL_1 0x00000000 +#define TXX9_SIFCR_TDIL_4 0x00000001 +#define TXX9_SIFCR_TDIL_8 0x00000010 +#define TXX9_SIFCR_TDIL_MAX 0x00000010 +#define TXX9_SIFCR_TFRST 0x00000004 +#define TXX9_SIFCR_RFRST 0x00000002 +#define TXX9_SIFCR_FRSTE 0x00000001 +#define TXX9_SIO_TX_FIFO 8 +#define TXX9_SIO_RX_FIFO 16 + +/* SIFLCR : Flow Control */ +#define TXX9_SIFLCR_RCS 0x00001000 +#define TXX9_SIFLCR_TES 0x00000800 +#define TXX9_SIFLCR_RTSSC 0x00000200 +#define TXX9_SIFLCR_RSDE 0x00000100 +#define TXX9_SIFLCR_TSDE 0x00000080 +#define TXX9_SIFLCR_RTSTL_MASK 0x0000001e +#define TXX9_SIFLCR_RTSTL_MAX 0x0000001e +#define TXX9_SIFLCR_TBRK 0x00000001 + +/* SIBGR : Baudrate Control */ +#define TXX9_SIBGR_BCLK_MASK 0x00000300 +#define TXX9_SIBGR_BCLK_T0 0x00000000 +#define TXX9_SIBGR_BCLK_T2 0x00000100 +#define TXX9_SIBGR_BCLK_T4 0x00000200 +#define TXX9_SIBGR_BCLK_T6 0x00000300 +#define TXX9_SIBGR_BRD_MASK 0x000000ff + +static inline unsigned int sio_in(struct uart_txx9_port *up, int offset) +{ + switch (up->port.iotype) { + default: + return __raw_readl(up->port.membase + offset); + case UPIO_PORT: + return inl(up->port.iobase + offset); + } +} + +static inline void +sio_out(struct uart_txx9_port *up, int offset, int value) +{ + switch (up->port.iotype) { + default: + __raw_writel(value, up->port.membase + offset); + break; + case UPIO_PORT: + outl(value, up->port.iobase + offset); + break; + } +} + +static inline void +sio_mask(struct uart_txx9_port *up, int offset, unsigned int value) +{ + sio_out(up, offset, sio_in(up, offset) & ~value); +} +static inline void +sio_set(struct uart_txx9_port *up, int offset, unsigned int value) +{ + sio_out(up, offset, sio_in(up, offset) | value); +} + +static inline void +sio_quot_set(struct uart_txx9_port *up, int quot) +{ + quot >>= 1; + if (quot < 256) + sio_out(up, TXX9_SIBGR, quot | TXX9_SIBGR_BCLK_T0); + else if (quot < (256 << 2)) + sio_out(up, TXX9_SIBGR, (quot >> 2) | TXX9_SIBGR_BCLK_T2); + else if (quot < (256 << 4)) + sio_out(up, TXX9_SIBGR, (quot >> 4) | TXX9_SIBGR_BCLK_T4); + else if (quot < (256 << 6)) + sio_out(up, TXX9_SIBGR, (quot >> 6) | TXX9_SIBGR_BCLK_T6); + else + sio_out(up, TXX9_SIBGR, 0xff | TXX9_SIBGR_BCLK_T6); +} + +static struct uart_txx9_port *to_uart_txx9_port(struct uart_port *port) +{ + return container_of(port, struct uart_txx9_port, port); +} + +static void serial_txx9_stop_tx(struct uart_port *port) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + sio_mask(up, TXX9_SIDICR, TXX9_SIDICR_TIE); +} + +static void serial_txx9_start_tx(struct uart_port *port) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + sio_set(up, TXX9_SIDICR, TXX9_SIDICR_TIE); +} + +static void serial_txx9_stop_rx(struct uart_port *port) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + up->port.read_status_mask &= ~TXX9_SIDISR_RDIS; +} + +static void serial_txx9_initialize(struct uart_port *port) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + unsigned int tmout = 10000; + + sio_out(up, TXX9_SIFCR, TXX9_SIFCR_SWRST); + /* TX4925 BUG WORKAROUND. Accessing SIOC register + * immediately after soft reset causes bus error. */ + udelay(1); + while ((sio_in(up, TXX9_SIFCR) & TXX9_SIFCR_SWRST) && --tmout) + udelay(1); + /* TX Int by FIFO Empty, RX Int by Receiving 1 char. */ + sio_set(up, TXX9_SIFCR, + TXX9_SIFCR_TDIL_MAX | TXX9_SIFCR_RDIL_1); + /* initial settings */ + sio_out(up, TXX9_SILCR, + TXX9_SILCR_UMODE_8BIT | TXX9_SILCR_USBL_1BIT | + ((up->port.flags & UPF_TXX9_USE_SCLK) ? + TXX9_SILCR_SCS_SCLK_BG : TXX9_SILCR_SCS_IMCLK_BG)); + sio_quot_set(up, uart_get_divisor(port, 9600)); + sio_out(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSTL_MAX /* 15 */); + sio_out(up, TXX9_SIDICR, 0); +} + +static inline void +receive_chars(struct uart_txx9_port *up, unsigned int *status) +{ + unsigned char ch; + unsigned int disr = *status; + int max_count = 256; + char flag; + unsigned int next_ignore_status_mask; + + do { + ch = sio_in(up, TXX9_SIRFIFO); + flag = TTY_NORMAL; + up->port.icount.rx++; + + /* mask out RFDN_MASK bit added by previous overrun */ + next_ignore_status_mask = + up->port.ignore_status_mask & ~TXX9_SIDISR_RFDN_MASK; + if (unlikely(disr & (TXX9_SIDISR_UBRK | TXX9_SIDISR_UPER | + TXX9_SIDISR_UFER | TXX9_SIDISR_UOER))) { + /* + * For statistics only + */ + if (disr & TXX9_SIDISR_UBRK) { + disr &= ~(TXX9_SIDISR_UFER | TXX9_SIDISR_UPER); + up->port.icount.brk++; + /* + * We do the SysRQ and SAK checking + * here because otherwise the break + * may get masked by ignore_status_mask + * or read_status_mask. + */ + if (uart_handle_break(&up->port)) + goto ignore_char; + } else if (disr & TXX9_SIDISR_UPER) + up->port.icount.parity++; + else if (disr & TXX9_SIDISR_UFER) + up->port.icount.frame++; + if (disr & TXX9_SIDISR_UOER) { + up->port.icount.overrun++; + /* + * The receiver read buffer still hold + * a char which caused overrun. + * Ignore next char by adding RFDN_MASK + * to ignore_status_mask temporarily. + */ + next_ignore_status_mask |= + TXX9_SIDISR_RFDN_MASK; + } + + /* + * Mask off conditions which should be ingored. + */ + disr &= up->port.read_status_mask; + + if (disr & TXX9_SIDISR_UBRK) { + flag = TTY_BREAK; + } else if (disr & TXX9_SIDISR_UPER) + flag = TTY_PARITY; + else if (disr & TXX9_SIDISR_UFER) + flag = TTY_FRAME; + } + if (uart_handle_sysrq_char(&up->port, ch)) + goto ignore_char; + + uart_insert_char(&up->port, disr, TXX9_SIDISR_UOER, ch, flag); + + ignore_char: + up->port.ignore_status_mask = next_ignore_status_mask; + disr = sio_in(up, TXX9_SIDISR); + } while (!(disr & TXX9_SIDISR_UVALID) && (max_count-- > 0)); + spin_unlock(&up->port.lock); + tty_flip_buffer_push(&up->port.state->port); + spin_lock(&up->port.lock); + *status = disr; +} + +static inline void transmit_chars(struct uart_txx9_port *up) +{ + struct circ_buf *xmit = &up->port.state->xmit; + int count; + + if (up->port.x_char) { + sio_out(up, TXX9_SITFIFO, up->port.x_char); + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { + serial_txx9_stop_tx(&up->port); + return; + } + + count = TXX9_SIO_TX_FIFO; + do { + sio_out(up, TXX9_SITFIFO, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + if (uart_circ_empty(xmit)) + serial_txx9_stop_tx(&up->port); +} + +static irqreturn_t serial_txx9_interrupt(int irq, void *dev_id) +{ + int pass_counter = 0; + struct uart_txx9_port *up = dev_id; + unsigned int status; + + while (1) { + spin_lock(&up->port.lock); + status = sio_in(up, TXX9_SIDISR); + if (!(sio_in(up, TXX9_SIDICR) & TXX9_SIDICR_TIE)) + status &= ~TXX9_SIDISR_TDIS; + if (!(status & (TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS | + TXX9_SIDISR_TOUT))) { + spin_unlock(&up->port.lock); + break; + } + + if (status & TXX9_SIDISR_RDIS) + receive_chars(up, &status); + if (status & TXX9_SIDISR_TDIS) + transmit_chars(up); + /* Clear TX/RX Int. Status */ + sio_mask(up, TXX9_SIDISR, + TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS | + TXX9_SIDISR_TOUT); + spin_unlock(&up->port.lock); + + if (pass_counter++ > PASS_LIMIT) + break; + } + + return pass_counter ? IRQ_HANDLED : IRQ_NONE; +} + +static unsigned int serial_txx9_tx_empty(struct uart_port *port) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + unsigned long flags; + unsigned int ret; + + spin_lock_irqsave(&up->port.lock, flags); + ret = (sio_in(up, TXX9_SICISR) & TXX9_SICISR_TXALS) ? TIOCSER_TEMT : 0; + spin_unlock_irqrestore(&up->port.lock, flags); + + return ret; +} + +static unsigned int serial_txx9_get_mctrl(struct uart_port *port) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + unsigned int ret; + + /* no modem control lines */ + ret = TIOCM_CAR | TIOCM_DSR; + ret |= (sio_in(up, TXX9_SIFLCR) & TXX9_SIFLCR_RTSSC) ? 0 : TIOCM_RTS; + ret |= (sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS) ? 0 : TIOCM_CTS; + + return ret; +} + +static void serial_txx9_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + + if (mctrl & TIOCM_RTS) + sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSSC); + else + sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSSC); +} + +static void serial_txx9_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + if (break_state == -1) + sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK); + else + sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +#if defined(CONFIG_SERIAL_TXX9_CONSOLE) || defined(CONFIG_CONSOLE_POLL) +/* + * Wait for transmitter & holding register to empty + */ +static void wait_for_xmitr(struct uart_txx9_port *up) +{ + unsigned int tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + while (--tmout && + !(sio_in(up, TXX9_SICISR) & TXX9_SICISR_TXALS)) + udelay(1); + + /* Wait up to 1s for flow control if necessary */ + if (up->port.flags & UPF_CONS_FLOW) { + tmout = 1000000; + while (--tmout && + (sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS)) + udelay(1); + } +} +#endif + +#ifdef CONFIG_CONSOLE_POLL +/* + * Console polling routines for writing and reading from the uart while + * in an interrupt or debug context. + */ + +static int serial_txx9_get_poll_char(struct uart_port *port) +{ + unsigned int ier; + unsigned char c; + struct uart_txx9_port *up = to_uart_txx9_port(port); + + /* + * First save the IER then disable the interrupts + */ + ier = sio_in(up, TXX9_SIDICR); + sio_out(up, TXX9_SIDICR, 0); + + while (sio_in(up, TXX9_SIDISR) & TXX9_SIDISR_UVALID) + ; + + c = sio_in(up, TXX9_SIRFIFO); + + /* + * Finally, clear RX interrupt status + * and restore the IER + */ + sio_mask(up, TXX9_SIDISR, TXX9_SIDISR_RDIS); + sio_out(up, TXX9_SIDICR, ier); + return c; +} + + +static void serial_txx9_put_poll_char(struct uart_port *port, unsigned char c) +{ + unsigned int ier; + struct uart_txx9_port *up = to_uart_txx9_port(port); + + /* + * First save the IER then disable the interrupts + */ + ier = sio_in(up, TXX9_SIDICR); + sio_out(up, TXX9_SIDICR, 0); + + wait_for_xmitr(up); + /* + * Send the character out. + */ + sio_out(up, TXX9_SITFIFO, c); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up); + sio_out(up, TXX9_SIDICR, ier); +} + +#endif /* CONFIG_CONSOLE_POLL */ + +static int serial_txx9_startup(struct uart_port *port) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + unsigned long flags; + int retval; + + /* + * Clear the FIFO buffers and disable them. + * (they will be reenabled in set_termios()) + */ + sio_set(up, TXX9_SIFCR, + TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE); + /* clear reset */ + sio_mask(up, TXX9_SIFCR, + TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE); + sio_out(up, TXX9_SIDICR, 0); + + /* + * Clear the interrupt registers. + */ + sio_out(up, TXX9_SIDISR, 0); + + retval = request_irq(up->port.irq, serial_txx9_interrupt, + IRQF_SHARED, "serial_txx9", up); + if (retval) + return retval; + + /* + * Now, initialize the UART + */ + spin_lock_irqsave(&up->port.lock, flags); + serial_txx9_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* Enable RX/TX */ + sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_RSDE | TXX9_SIFLCR_TSDE); + + /* + * Finally, enable interrupts. + */ + sio_set(up, TXX9_SIDICR, TXX9_SIDICR_RIE); + + return 0; +} + +static void serial_txx9_shutdown(struct uart_port *port) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + unsigned long flags; + + /* + * Disable interrupts from this port + */ + sio_out(up, TXX9_SIDICR, 0); /* disable all intrs */ + + spin_lock_irqsave(&up->port.lock, flags); + serial_txx9_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * Disable break condition + */ + sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK); + +#ifdef CONFIG_SERIAL_TXX9_CONSOLE + if (up->port.cons && up->port.line == up->port.cons->index) { + free_irq(up->port.irq, up); + return; + } +#endif + /* reset FIFOs */ + sio_set(up, TXX9_SIFCR, + TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE); + /* clear reset */ + sio_mask(up, TXX9_SIFCR, + TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE); + + /* Disable RX/TX */ + sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_RSDE | TXX9_SIFLCR_TSDE); + + free_irq(up->port.irq, up); +} + +static void +serial_txx9_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + unsigned int cval, fcr = 0; + unsigned long flags; + unsigned int baud, quot; + + /* + * We don't support modem control lines. + */ + termios->c_cflag &= ~(HUPCL | CMSPAR); + termios->c_cflag |= CLOCAL; + + cval = sio_in(up, TXX9_SILCR); + /* byte size and parity */ + cval &= ~TXX9_SILCR_UMODE_MASK; + switch (termios->c_cflag & CSIZE) { + case CS7: + cval |= TXX9_SILCR_UMODE_7BIT; + break; + default: + case CS5: /* not supported */ + case CS6: /* not supported */ + case CS8: + cval |= TXX9_SILCR_UMODE_8BIT; + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= CS8; + break; + } + + cval &= ~TXX9_SILCR_USBL_MASK; + if (termios->c_cflag & CSTOPB) + cval |= TXX9_SILCR_USBL_2BIT; + else + cval |= TXX9_SILCR_USBL_1BIT; + cval &= ~(TXX9_SILCR_UPEN | TXX9_SILCR_UEPS); + if (termios->c_cflag & PARENB) + cval |= TXX9_SILCR_UPEN; + if (!(termios->c_cflag & PARODD)) + cval |= TXX9_SILCR_UEPS; + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16/2); + quot = uart_get_divisor(port, baud); + + /* Set up FIFOs */ + /* TX Int by FIFO Empty, RX Int by Receiving 1 char. */ + fcr = TXX9_SIFCR_TDIL_MAX | TXX9_SIFCR_RDIL_1; + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + spin_lock_irqsave(&up->port.lock, flags); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + up->port.read_status_mask = TXX9_SIDISR_UOER | + TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS; + if (termios->c_iflag & INPCK) + up->port.read_status_mask |= TXX9_SIDISR_UFER | TXX9_SIDISR_UPER; + if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) + up->port.read_status_mask |= TXX9_SIDISR_UBRK; + + /* + * Characteres to ignore + */ + up->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= TXX9_SIDISR_UPER | TXX9_SIDISR_UFER; + if (termios->c_iflag & IGNBRK) { + up->port.ignore_status_mask |= TXX9_SIDISR_UBRK; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= TXX9_SIDISR_UOER; + } + + /* + * ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + up->port.ignore_status_mask |= TXX9_SIDISR_RDIS; + + /* CTS flow control flag */ + if ((termios->c_cflag & CRTSCTS) && + (up->port.flags & UPF_TXX9_HAVE_CTS_LINE)) { + sio_set(up, TXX9_SIFLCR, + TXX9_SIFLCR_RCS | TXX9_SIFLCR_TES); + } else { + sio_mask(up, TXX9_SIFLCR, + TXX9_SIFLCR_RCS | TXX9_SIFLCR_TES); + } + + sio_out(up, TXX9_SILCR, cval); + sio_quot_set(up, quot); + sio_out(up, TXX9_SIFCR, fcr); + + serial_txx9_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static void +serial_txx9_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + /* + * If oldstate was -1 this is called from + * uart_configure_port(). In this case do not initialize the + * port now, because the port was already initialized (for + * non-console port) or should not be initialized here (for + * console port). If we initialized the port here we lose + * serial console settings. + */ + if (state == 0 && oldstate != -1) + serial_txx9_initialize(port); +} + +static int serial_txx9_request_resource(struct uart_txx9_port *up) +{ + unsigned int size = TXX9_REGION_SIZE; + int ret = 0; + + switch (up->port.iotype) { + default: + if (!up->port.mapbase) + break; + + if (!request_mem_region(up->port.mapbase, size, "serial_txx9")) { + ret = -EBUSY; + break; + } + + if (up->port.flags & UPF_IOREMAP) { + up->port.membase = ioremap(up->port.mapbase, size); + if (!up->port.membase) { + release_mem_region(up->port.mapbase, size); + ret = -ENOMEM; + } + } + break; + + case UPIO_PORT: + if (!request_region(up->port.iobase, size, "serial_txx9")) + ret = -EBUSY; + break; + } + return ret; +} + +static void serial_txx9_release_resource(struct uart_txx9_port *up) +{ + unsigned int size = TXX9_REGION_SIZE; + + switch (up->port.iotype) { + default: + if (!up->port.mapbase) + break; + + if (up->port.flags & UPF_IOREMAP) { + iounmap(up->port.membase); + up->port.membase = NULL; + } + + release_mem_region(up->port.mapbase, size); + break; + + case UPIO_PORT: + release_region(up->port.iobase, size); + break; + } +} + +static void serial_txx9_release_port(struct uart_port *port) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + serial_txx9_release_resource(up); +} + +static int serial_txx9_request_port(struct uart_port *port) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + return serial_txx9_request_resource(up); +} + +static void serial_txx9_config_port(struct uart_port *port, int uflags) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + int ret; + + /* + * Find the region that we can probe for. This in turn + * tells us whether we can probe for the type of port. + */ + ret = serial_txx9_request_resource(up); + if (ret < 0) + return; + port->type = PORT_TXX9; + up->port.fifosize = TXX9_SIO_TX_FIFO; + +#ifdef CONFIG_SERIAL_TXX9_CONSOLE + if (up->port.line == up->port.cons->index) + return; +#endif + serial_txx9_initialize(port); +} + +static const char * +serial_txx9_type(struct uart_port *port) +{ + return "txx9"; +} + +static const struct uart_ops serial_txx9_pops = { + .tx_empty = serial_txx9_tx_empty, + .set_mctrl = serial_txx9_set_mctrl, + .get_mctrl = serial_txx9_get_mctrl, + .stop_tx = serial_txx9_stop_tx, + .start_tx = serial_txx9_start_tx, + .stop_rx = serial_txx9_stop_rx, + .break_ctl = serial_txx9_break_ctl, + .startup = serial_txx9_startup, + .shutdown = serial_txx9_shutdown, + .set_termios = serial_txx9_set_termios, + .pm = serial_txx9_pm, + .type = serial_txx9_type, + .release_port = serial_txx9_release_port, + .request_port = serial_txx9_request_port, + .config_port = serial_txx9_config_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = serial_txx9_get_poll_char, + .poll_put_char = serial_txx9_put_poll_char, +#endif +}; + +static struct uart_txx9_port serial_txx9_ports[UART_NR]; + +static void __init serial_txx9_register_ports(struct uart_driver *drv, + struct device *dev) +{ + int i; + + for (i = 0; i < UART_NR; i++) { + struct uart_txx9_port *up = &serial_txx9_ports[i]; + + up->port.line = i; + up->port.ops = &serial_txx9_pops; + up->port.dev = dev; + if (up->port.iobase || up->port.mapbase) + uart_add_one_port(drv, &up->port); + } +} + +#ifdef CONFIG_SERIAL_TXX9_CONSOLE + +static void serial_txx9_console_putchar(struct uart_port *port, int ch) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + + wait_for_xmitr(up); + sio_out(up, TXX9_SITFIFO, ch); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console_lock must be held when we get here. + */ +static void +serial_txx9_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_txx9_port *up = &serial_txx9_ports[co->index]; + unsigned int ier, flcr; + + /* + * First save the UER then disable the interrupts + */ + ier = sio_in(up, TXX9_SIDICR); + sio_out(up, TXX9_SIDICR, 0); + /* + * Disable flow-control if enabled (and unnecessary) + */ + flcr = sio_in(up, TXX9_SIFLCR); + if (!(up->port.flags & UPF_CONS_FLOW) && (flcr & TXX9_SIFLCR_TES)) + sio_out(up, TXX9_SIFLCR, flcr & ~TXX9_SIFLCR_TES); + + uart_console_write(&up->port, s, count, serial_txx9_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up); + sio_out(up, TXX9_SIFLCR, flcr); + sio_out(up, TXX9_SIDICR, ier); +} + +static int __init serial_txx9_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + struct uart_txx9_port *up; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= UART_NR) + co->index = 0; + up = &serial_txx9_ports[co->index]; + port = &up->port; + if (!port->ops) + return -ENODEV; + + serial_txx9_initialize(&up->port); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver serial_txx9_reg; +static struct console serial_txx9_console = { + .name = TXX9_TTY_NAME, + .write = serial_txx9_console_write, + .device = uart_console_device, + .setup = serial_txx9_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &serial_txx9_reg, +}; + +static int __init serial_txx9_console_init(void) +{ + register_console(&serial_txx9_console); + return 0; +} +console_initcall(serial_txx9_console_init); + +#define SERIAL_TXX9_CONSOLE &serial_txx9_console +#else +#define SERIAL_TXX9_CONSOLE NULL +#endif + +static struct uart_driver serial_txx9_reg = { + .owner = THIS_MODULE, + .driver_name = "serial_txx9", + .dev_name = TXX9_TTY_NAME, + .major = TXX9_TTY_MAJOR, + .minor = TXX9_TTY_MINOR_START, + .nr = UART_NR, + .cons = SERIAL_TXX9_CONSOLE, +}; + +int __init early_serial_txx9_setup(struct uart_port *port) +{ + if (port->line >= ARRAY_SIZE(serial_txx9_ports)) + return -ENODEV; + + serial_txx9_ports[port->line].port = *port; + serial_txx9_ports[port->line].port.ops = &serial_txx9_pops; + serial_txx9_ports[port->line].port.flags |= + UPF_BOOT_AUTOCONF | UPF_FIXED_PORT; + return 0; +} + +static DEFINE_MUTEX(serial_txx9_mutex); + +/** + * serial_txx9_register_port - register a serial port + * @port: serial port template + * + * Configure the serial port specified by the request. + * + * The port is then probed and if necessary the IRQ is autodetected + * If this fails an error is returned. + * + * On success the port is ready to use and the line number is returned. + */ +static int serial_txx9_register_port(struct uart_port *port) +{ + int i; + struct uart_txx9_port *uart; + int ret = -ENOSPC; + + mutex_lock(&serial_txx9_mutex); + for (i = 0; i < UART_NR; i++) { + uart = &serial_txx9_ports[i]; + if (uart_match_port(&uart->port, port)) { + uart_remove_one_port(&serial_txx9_reg, &uart->port); + break; + } + } + if (i == UART_NR) { + /* Find unused port */ + for (i = 0; i < UART_NR; i++) { + uart = &serial_txx9_ports[i]; + if (!(uart->port.iobase || uart->port.mapbase)) + break; + } + } + if (i < UART_NR) { + uart->port.iobase = port->iobase; + uart->port.membase = port->membase; + uart->port.irq = port->irq; + uart->port.uartclk = port->uartclk; + uart->port.iotype = port->iotype; + uart->port.flags = port->flags + | UPF_BOOT_AUTOCONF | UPF_FIXED_PORT; + uart->port.mapbase = port->mapbase; + if (port->dev) + uart->port.dev = port->dev; + ret = uart_add_one_port(&serial_txx9_reg, &uart->port); + if (ret == 0) + ret = uart->port.line; + } + mutex_unlock(&serial_txx9_mutex); + return ret; +} + +/** + * serial_txx9_unregister_port - remove a txx9 serial port at runtime + * @line: serial line number + * + * Remove one serial port. This may not be called from interrupt + * context. We hand the port back to the our control. + */ +static void serial_txx9_unregister_port(int line) +{ + struct uart_txx9_port *uart = &serial_txx9_ports[line]; + + mutex_lock(&serial_txx9_mutex); + uart_remove_one_port(&serial_txx9_reg, &uart->port); + uart->port.flags = 0; + uart->port.type = PORT_UNKNOWN; + uart->port.iobase = 0; + uart->port.mapbase = 0; + uart->port.membase = NULL; + uart->port.dev = NULL; + mutex_unlock(&serial_txx9_mutex); +} + +/* + * Register a set of serial devices attached to a platform device. + */ +static int serial_txx9_probe(struct platform_device *dev) +{ + struct uart_port *p = dev_get_platdata(&dev->dev); + struct uart_port port; + int ret, i; + + memset(&port, 0, sizeof(struct uart_port)); + for (i = 0; p && p->uartclk != 0; p++, i++) { + port.iobase = p->iobase; + port.membase = p->membase; + port.irq = p->irq; + port.uartclk = p->uartclk; + port.iotype = p->iotype; + port.flags = p->flags; + port.mapbase = p->mapbase; + port.dev = &dev->dev; + port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_TXX9_CONSOLE); + ret = serial_txx9_register_port(&port); + if (ret < 0) { + dev_err(&dev->dev, "unable to register port at index %d " + "(IO%lx MEM%llx IRQ%d): %d\n", i, + p->iobase, (unsigned long long)p->mapbase, + p->irq, ret); + } + } + return 0; +} + +/* + * Remove serial ports registered against a platform device. + */ +static int serial_txx9_remove(struct platform_device *dev) +{ + int i; + + for (i = 0; i < UART_NR; i++) { + struct uart_txx9_port *up = &serial_txx9_ports[i]; + + if (up->port.dev == &dev->dev) + serial_txx9_unregister_port(i); + } + return 0; +} + +#ifdef CONFIG_PM +static int serial_txx9_suspend(struct platform_device *dev, pm_message_t state) +{ + int i; + + for (i = 0; i < UART_NR; i++) { + struct uart_txx9_port *up = &serial_txx9_ports[i]; + + if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) + uart_suspend_port(&serial_txx9_reg, &up->port); + } + + return 0; +} + +static int serial_txx9_resume(struct platform_device *dev) +{ + int i; + + for (i = 0; i < UART_NR; i++) { + struct uart_txx9_port *up = &serial_txx9_ports[i]; + + if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) + uart_resume_port(&serial_txx9_reg, &up->port); + } + + return 0; +} +#endif + +static struct platform_driver serial_txx9_plat_driver = { + .probe = serial_txx9_probe, + .remove = serial_txx9_remove, +#ifdef CONFIG_PM + .suspend = serial_txx9_suspend, + .resume = serial_txx9_resume, +#endif + .driver = { + .name = "serial_txx9", + }, +}; + +#ifdef ENABLE_SERIAL_TXX9_PCI +/* + * Probe one serial board. Unfortunately, there is no rhyme nor reason + * to the arrangement of serial ports on a PCI card. + */ +static int +pciserial_txx9_init_one(struct pci_dev *dev, const struct pci_device_id *ent) +{ + struct uart_port port; + int line; + int rc; + + rc = pci_enable_device(dev); + if (rc) + return rc; + + memset(&port, 0, sizeof(port)); + port.ops = &serial_txx9_pops; + port.flags |= UPF_TXX9_HAVE_CTS_LINE; + port.uartclk = 66670000; + port.irq = dev->irq; + port.iotype = UPIO_PORT; + port.iobase = pci_resource_start(dev, 1); + port.dev = &dev->dev; + line = serial_txx9_register_port(&port); + if (line < 0) { + printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), line); + pci_disable_device(dev); + return line; + } + pci_set_drvdata(dev, &serial_txx9_ports[line]); + + return 0; +} + +static void pciserial_txx9_remove_one(struct pci_dev *dev) +{ + struct uart_txx9_port *up = pci_get_drvdata(dev); + + if (up) { + serial_txx9_unregister_port(up->port.line); + pci_disable_device(dev); + } +} + +#ifdef CONFIG_PM +static int pciserial_txx9_suspend_one(struct pci_dev *dev, pm_message_t state) +{ + struct uart_txx9_port *up = pci_get_drvdata(dev); + + if (up) + uart_suspend_port(&serial_txx9_reg, &up->port); + pci_save_state(dev); + pci_set_power_state(dev, pci_choose_state(dev, state)); + return 0; +} + +static int pciserial_txx9_resume_one(struct pci_dev *dev) +{ + struct uart_txx9_port *up = pci_get_drvdata(dev); + + pci_set_power_state(dev, PCI_D0); + pci_restore_state(dev); + if (up) + uart_resume_port(&serial_txx9_reg, &up->port); + return 0; +} +#endif + +static const struct pci_device_id serial_txx9_pci_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC86C001_MISC) }, + { 0, } +}; + +static struct pci_driver serial_txx9_pci_driver = { + .name = "serial_txx9", + .probe = pciserial_txx9_init_one, + .remove = pciserial_txx9_remove_one, +#ifdef CONFIG_PM + .suspend = pciserial_txx9_suspend_one, + .resume = pciserial_txx9_resume_one, +#endif + .id_table = serial_txx9_pci_tbl, +}; + +MODULE_DEVICE_TABLE(pci, serial_txx9_pci_tbl); +#endif /* ENABLE_SERIAL_TXX9_PCI */ + +static struct platform_device *serial_txx9_plat_devs; + +static int __init serial_txx9_init(void) +{ + int ret; + + printk(KERN_INFO "%s version %s\n", serial_name, serial_version); + + ret = uart_register_driver(&serial_txx9_reg); + if (ret) + goto out; + + serial_txx9_plat_devs = platform_device_alloc("serial_txx9", -1); + if (!serial_txx9_plat_devs) { + ret = -ENOMEM; + goto unreg_uart_drv; + } + + ret = platform_device_add(serial_txx9_plat_devs); + if (ret) + goto put_dev; + + serial_txx9_register_ports(&serial_txx9_reg, + &serial_txx9_plat_devs->dev); + + ret = platform_driver_register(&serial_txx9_plat_driver); + if (ret) + goto del_dev; + +#ifdef ENABLE_SERIAL_TXX9_PCI + ret = pci_register_driver(&serial_txx9_pci_driver); + if (ret) { + platform_driver_unregister(&serial_txx9_plat_driver); + } +#endif + if (ret == 0) + goto out; + + del_dev: + platform_device_del(serial_txx9_plat_devs); + put_dev: + platform_device_put(serial_txx9_plat_devs); + unreg_uart_drv: + uart_unregister_driver(&serial_txx9_reg); + out: + return ret; +} + +static void __exit serial_txx9_exit(void) +{ + int i; + +#ifdef ENABLE_SERIAL_TXX9_PCI + pci_unregister_driver(&serial_txx9_pci_driver); +#endif + platform_driver_unregister(&serial_txx9_plat_driver); + platform_device_unregister(serial_txx9_plat_devs); + for (i = 0; i < UART_NR; i++) { + struct uart_txx9_port *up = &serial_txx9_ports[i]; + if (up->port.iobase || up->port.mapbase) + uart_remove_one_port(&serial_txx9_reg, &up->port); + } + + uart_unregister_driver(&serial_txx9_reg); +} + +module_init(serial_txx9_init); +module_exit(serial_txx9_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("TX39/49 serial driver"); + +MODULE_ALIAS_CHARDEV_MAJOR(TXX9_TTY_MAJOR); diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c new file mode 100644 index 000000000..a7c28543c --- /dev/null +++ b/drivers/tty/serial/sh-sci.c @@ -0,0 +1,3521 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SuperH on-chip serial module support. (SCI with no FIFO / with FIFO) + * + * Copyright (C) 2002 - 2011 Paul Mundt + * Copyright (C) 2015 Glider bvba + * Modified to support SH7720 SCIF. Markus Brunner, Mark Jonas (Jul 2007). + * + * based off of the old drivers/char/sh-sci.c by: + * + * Copyright (C) 1999, 2000 Niibe Yutaka + * Copyright (C) 2000 Sugioka Toshinobu + * Modified to support multiple serial ports. Stuart Menefy (May 2000). + * Modified to support SecureEdge. David McCullough (2002) + * Modified to support SH7300 SCIF. Takashi Kusuda (Jun 2003). + * Removed SH7300 support (Jul 2007). + */ +#undef DEBUG + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_SUPERH +#include +#include +#endif + +#include "serial_mctrl_gpio.h" +#include "sh-sci.h" + +/* Offsets into the sci_port->irqs array */ +enum { + SCIx_ERI_IRQ, + SCIx_RXI_IRQ, + SCIx_TXI_IRQ, + SCIx_BRI_IRQ, + SCIx_DRI_IRQ, + SCIx_TEI_IRQ, + SCIx_NR_IRQS, + + SCIx_MUX_IRQ = SCIx_NR_IRQS, /* special case */ +}; + +#define SCIx_IRQ_IS_MUXED(port) \ + ((port)->irqs[SCIx_ERI_IRQ] == \ + (port)->irqs[SCIx_RXI_IRQ]) || \ + ((port)->irqs[SCIx_ERI_IRQ] && \ + ((port)->irqs[SCIx_RXI_IRQ] < 0)) + +enum SCI_CLKS { + SCI_FCK, /* Functional Clock */ + SCI_SCK, /* Optional External Clock */ + SCI_BRG_INT, /* Optional BRG Internal Clock Source */ + SCI_SCIF_CLK, /* Optional BRG External Clock Source */ + SCI_NUM_CLKS +}; + +/* Bit x set means sampling rate x + 1 is supported */ +#define SCI_SR(x) BIT((x) - 1) +#define SCI_SR_RANGE(x, y) GENMASK((y) - 1, (x) - 1) + +#define SCI_SR_SCIFAB SCI_SR(5) | SCI_SR(7) | SCI_SR(11) | \ + SCI_SR(13) | SCI_SR(16) | SCI_SR(17) | \ + SCI_SR(19) | SCI_SR(27) + +#define min_sr(_port) ffs((_port)->sampling_rate_mask) +#define max_sr(_port) fls((_port)->sampling_rate_mask) + +/* Iterate over all supported sampling rates, from high to low */ +#define for_each_sr(_sr, _port) \ + for ((_sr) = max_sr(_port); (_sr) >= min_sr(_port); (_sr)--) \ + if ((_port)->sampling_rate_mask & SCI_SR((_sr))) + +struct plat_sci_reg { + u8 offset, size; +}; + +struct sci_port_params { + const struct plat_sci_reg regs[SCIx_NR_REGS]; + unsigned int fifosize; + unsigned int overrun_reg; + unsigned int overrun_mask; + unsigned int sampling_rate_mask; + unsigned int error_mask; + unsigned int error_clear; +}; + +struct sci_port { + struct uart_port port; + + /* Platform configuration */ + const struct sci_port_params *params; + const struct plat_sci_port *cfg; + unsigned int sampling_rate_mask; + resource_size_t reg_size; + struct mctrl_gpios *gpios; + + /* Clocks */ + struct clk *clks[SCI_NUM_CLKS]; + unsigned long clk_rates[SCI_NUM_CLKS]; + + int irqs[SCIx_NR_IRQS]; + char *irqstr[SCIx_NR_IRQS]; + + struct dma_chan *chan_tx; + struct dma_chan *chan_rx; + +#ifdef CONFIG_SERIAL_SH_SCI_DMA + struct dma_chan *chan_tx_saved; + struct dma_chan *chan_rx_saved; + dma_cookie_t cookie_tx; + dma_cookie_t cookie_rx[2]; + dma_cookie_t active_rx; + dma_addr_t tx_dma_addr; + unsigned int tx_dma_len; + struct scatterlist sg_rx[2]; + void *rx_buf[2]; + size_t buf_len_rx; + struct work_struct work_tx; + struct hrtimer rx_timer; + unsigned int rx_timeout; /* microseconds */ +#endif + unsigned int rx_frame; + int rx_trigger; + struct timer_list rx_fifo_timer; + int rx_fifo_timeout; + u16 hscif_tot; + + bool has_rtscts; + bool autorts; +}; + +#define SCI_NPORTS CONFIG_SERIAL_SH_SCI_NR_UARTS + +static struct sci_port sci_ports[SCI_NPORTS]; +static unsigned long sci_ports_in_use; +static struct uart_driver sci_uart_driver; + +static inline struct sci_port * +to_sci_port(struct uart_port *uart) +{ + return container_of(uart, struct sci_port, port); +} + +static const struct sci_port_params sci_port_params[SCIx_NR_REGTYPES] = { + /* + * Common SCI definitions, dependent on the port's regshift + * value. + */ + [SCIx_SCI_REGTYPE] = { + .regs = { + [SCSMR] = { 0x00, 8 }, + [SCBRR] = { 0x01, 8 }, + [SCSCR] = { 0x02, 8 }, + [SCxTDR] = { 0x03, 8 }, + [SCxSR] = { 0x04, 8 }, + [SCxRDR] = { 0x05, 8 }, + }, + .fifosize = 1, + .overrun_reg = SCxSR, + .overrun_mask = SCI_ORER, + .sampling_rate_mask = SCI_SR(32), + .error_mask = SCI_DEFAULT_ERROR_MASK | SCI_ORER, + .error_clear = SCI_ERROR_CLEAR & ~SCI_ORER, + }, + + /* + * Common definitions for legacy IrDA ports. + */ + [SCIx_IRDA_REGTYPE] = { + .regs = { + [SCSMR] = { 0x00, 8 }, + [SCBRR] = { 0x02, 8 }, + [SCSCR] = { 0x04, 8 }, + [SCxTDR] = { 0x06, 8 }, + [SCxSR] = { 0x08, 16 }, + [SCxRDR] = { 0x0a, 8 }, + [SCFCR] = { 0x0c, 8 }, + [SCFDR] = { 0x0e, 16 }, + }, + .fifosize = 1, + .overrun_reg = SCxSR, + .overrun_mask = SCI_ORER, + .sampling_rate_mask = SCI_SR(32), + .error_mask = SCI_DEFAULT_ERROR_MASK | SCI_ORER, + .error_clear = SCI_ERROR_CLEAR & ~SCI_ORER, + }, + + /* + * Common SCIFA definitions. + */ + [SCIx_SCIFA_REGTYPE] = { + .regs = { + [SCSMR] = { 0x00, 16 }, + [SCBRR] = { 0x04, 8 }, + [SCSCR] = { 0x08, 16 }, + [SCxTDR] = { 0x20, 8 }, + [SCxSR] = { 0x14, 16 }, + [SCxRDR] = { 0x24, 8 }, + [SCFCR] = { 0x18, 16 }, + [SCFDR] = { 0x1c, 16 }, + [SCPCR] = { 0x30, 16 }, + [SCPDR] = { 0x34, 16 }, + }, + .fifosize = 64, + .overrun_reg = SCxSR, + .overrun_mask = SCIFA_ORER, + .sampling_rate_mask = SCI_SR_SCIFAB, + .error_mask = SCIF_DEFAULT_ERROR_MASK | SCIFA_ORER, + .error_clear = SCIF_ERROR_CLEAR & ~SCIFA_ORER, + }, + + /* + * Common SCIFB definitions. + */ + [SCIx_SCIFB_REGTYPE] = { + .regs = { + [SCSMR] = { 0x00, 16 }, + [SCBRR] = { 0x04, 8 }, + [SCSCR] = { 0x08, 16 }, + [SCxTDR] = { 0x40, 8 }, + [SCxSR] = { 0x14, 16 }, + [SCxRDR] = { 0x60, 8 }, + [SCFCR] = { 0x18, 16 }, + [SCTFDR] = { 0x38, 16 }, + [SCRFDR] = { 0x3c, 16 }, + [SCPCR] = { 0x30, 16 }, + [SCPDR] = { 0x34, 16 }, + }, + .fifosize = 256, + .overrun_reg = SCxSR, + .overrun_mask = SCIFA_ORER, + .sampling_rate_mask = SCI_SR_SCIFAB, + .error_mask = SCIF_DEFAULT_ERROR_MASK | SCIFA_ORER, + .error_clear = SCIF_ERROR_CLEAR & ~SCIFA_ORER, + }, + + /* + * Common SH-2(A) SCIF definitions for ports with FIFO data + * count registers. + */ + [SCIx_SH2_SCIF_FIFODATA_REGTYPE] = { + .regs = { + [SCSMR] = { 0x00, 16 }, + [SCBRR] = { 0x04, 8 }, + [SCSCR] = { 0x08, 16 }, + [SCxTDR] = { 0x0c, 8 }, + [SCxSR] = { 0x10, 16 }, + [SCxRDR] = { 0x14, 8 }, + [SCFCR] = { 0x18, 16 }, + [SCFDR] = { 0x1c, 16 }, + [SCSPTR] = { 0x20, 16 }, + [SCLSR] = { 0x24, 16 }, + }, + .fifosize = 16, + .overrun_reg = SCLSR, + .overrun_mask = SCLSR_ORER, + .sampling_rate_mask = SCI_SR(32), + .error_mask = SCIF_DEFAULT_ERROR_MASK, + .error_clear = SCIF_ERROR_CLEAR, + }, + + /* + * The "SCIFA" that is in RZ/T and RZ/A2. + * It looks like a normal SCIF with FIFO data, but with a + * compressed address space. Also, the break out of interrupts + * are different: ERI/BRI, RXI, TXI, TEI, DRI. + */ + [SCIx_RZ_SCIFA_REGTYPE] = { + .regs = { + [SCSMR] = { 0x00, 16 }, + [SCBRR] = { 0x02, 8 }, + [SCSCR] = { 0x04, 16 }, + [SCxTDR] = { 0x06, 8 }, + [SCxSR] = { 0x08, 16 }, + [SCxRDR] = { 0x0A, 8 }, + [SCFCR] = { 0x0C, 16 }, + [SCFDR] = { 0x0E, 16 }, + [SCSPTR] = { 0x10, 16 }, + [SCLSR] = { 0x12, 16 }, + }, + .fifosize = 16, + .overrun_reg = SCLSR, + .overrun_mask = SCLSR_ORER, + .sampling_rate_mask = SCI_SR(32), + .error_mask = SCIF_DEFAULT_ERROR_MASK, + .error_clear = SCIF_ERROR_CLEAR, + }, + + /* + * Common SH-3 SCIF definitions. + */ + [SCIx_SH3_SCIF_REGTYPE] = { + .regs = { + [SCSMR] = { 0x00, 8 }, + [SCBRR] = { 0x02, 8 }, + [SCSCR] = { 0x04, 8 }, + [SCxTDR] = { 0x06, 8 }, + [SCxSR] = { 0x08, 16 }, + [SCxRDR] = { 0x0a, 8 }, + [SCFCR] = { 0x0c, 8 }, + [SCFDR] = { 0x0e, 16 }, + }, + .fifosize = 16, + .overrun_reg = SCLSR, + .overrun_mask = SCLSR_ORER, + .sampling_rate_mask = SCI_SR(32), + .error_mask = SCIF_DEFAULT_ERROR_MASK, + .error_clear = SCIF_ERROR_CLEAR, + }, + + /* + * Common SH-4(A) SCIF(B) definitions. + */ + [SCIx_SH4_SCIF_REGTYPE] = { + .regs = { + [SCSMR] = { 0x00, 16 }, + [SCBRR] = { 0x04, 8 }, + [SCSCR] = { 0x08, 16 }, + [SCxTDR] = { 0x0c, 8 }, + [SCxSR] = { 0x10, 16 }, + [SCxRDR] = { 0x14, 8 }, + [SCFCR] = { 0x18, 16 }, + [SCFDR] = { 0x1c, 16 }, + [SCSPTR] = { 0x20, 16 }, + [SCLSR] = { 0x24, 16 }, + }, + .fifosize = 16, + .overrun_reg = SCLSR, + .overrun_mask = SCLSR_ORER, + .sampling_rate_mask = SCI_SR(32), + .error_mask = SCIF_DEFAULT_ERROR_MASK, + .error_clear = SCIF_ERROR_CLEAR, + }, + + /* + * Common SCIF definitions for ports with a Baud Rate Generator for + * External Clock (BRG). + */ + [SCIx_SH4_SCIF_BRG_REGTYPE] = { + .regs = { + [SCSMR] = { 0x00, 16 }, + [SCBRR] = { 0x04, 8 }, + [SCSCR] = { 0x08, 16 }, + [SCxTDR] = { 0x0c, 8 }, + [SCxSR] = { 0x10, 16 }, + [SCxRDR] = { 0x14, 8 }, + [SCFCR] = { 0x18, 16 }, + [SCFDR] = { 0x1c, 16 }, + [SCSPTR] = { 0x20, 16 }, + [SCLSR] = { 0x24, 16 }, + [SCDL] = { 0x30, 16 }, + [SCCKS] = { 0x34, 16 }, + }, + .fifosize = 16, + .overrun_reg = SCLSR, + .overrun_mask = SCLSR_ORER, + .sampling_rate_mask = SCI_SR(32), + .error_mask = SCIF_DEFAULT_ERROR_MASK, + .error_clear = SCIF_ERROR_CLEAR, + }, + + /* + * Common HSCIF definitions. + */ + [SCIx_HSCIF_REGTYPE] = { + .regs = { + [SCSMR] = { 0x00, 16 }, + [SCBRR] = { 0x04, 8 }, + [SCSCR] = { 0x08, 16 }, + [SCxTDR] = { 0x0c, 8 }, + [SCxSR] = { 0x10, 16 }, + [SCxRDR] = { 0x14, 8 }, + [SCFCR] = { 0x18, 16 }, + [SCFDR] = { 0x1c, 16 }, + [SCSPTR] = { 0x20, 16 }, + [SCLSR] = { 0x24, 16 }, + [HSSRR] = { 0x40, 16 }, + [SCDL] = { 0x30, 16 }, + [SCCKS] = { 0x34, 16 }, + [HSRTRGR] = { 0x54, 16 }, + [HSTTRGR] = { 0x58, 16 }, + }, + .fifosize = 128, + .overrun_reg = SCLSR, + .overrun_mask = SCLSR_ORER, + .sampling_rate_mask = SCI_SR_RANGE(8, 32), + .error_mask = SCIF_DEFAULT_ERROR_MASK, + .error_clear = SCIF_ERROR_CLEAR, + }, + + /* + * Common SH-4(A) SCIF(B) definitions for ports without an SCSPTR + * register. + */ + [SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE] = { + .regs = { + [SCSMR] = { 0x00, 16 }, + [SCBRR] = { 0x04, 8 }, + [SCSCR] = { 0x08, 16 }, + [SCxTDR] = { 0x0c, 8 }, + [SCxSR] = { 0x10, 16 }, + [SCxRDR] = { 0x14, 8 }, + [SCFCR] = { 0x18, 16 }, + [SCFDR] = { 0x1c, 16 }, + [SCLSR] = { 0x24, 16 }, + }, + .fifosize = 16, + .overrun_reg = SCLSR, + .overrun_mask = SCLSR_ORER, + .sampling_rate_mask = SCI_SR(32), + .error_mask = SCIF_DEFAULT_ERROR_MASK, + .error_clear = SCIF_ERROR_CLEAR, + }, + + /* + * Common SH-4(A) SCIF(B) definitions for ports with FIFO data + * count registers. + */ + [SCIx_SH4_SCIF_FIFODATA_REGTYPE] = { + .regs = { + [SCSMR] = { 0x00, 16 }, + [SCBRR] = { 0x04, 8 }, + [SCSCR] = { 0x08, 16 }, + [SCxTDR] = { 0x0c, 8 }, + [SCxSR] = { 0x10, 16 }, + [SCxRDR] = { 0x14, 8 }, + [SCFCR] = { 0x18, 16 }, + [SCFDR] = { 0x1c, 16 }, + [SCTFDR] = { 0x1c, 16 }, /* aliased to SCFDR */ + [SCRFDR] = { 0x20, 16 }, + [SCSPTR] = { 0x24, 16 }, + [SCLSR] = { 0x28, 16 }, + }, + .fifosize = 16, + .overrun_reg = SCLSR, + .overrun_mask = SCLSR_ORER, + .sampling_rate_mask = SCI_SR(32), + .error_mask = SCIF_DEFAULT_ERROR_MASK, + .error_clear = SCIF_ERROR_CLEAR, + }, + + /* + * SH7705-style SCIF(B) ports, lacking both SCSPTR and SCLSR + * registers. + */ + [SCIx_SH7705_SCIF_REGTYPE] = { + .regs = { + [SCSMR] = { 0x00, 16 }, + [SCBRR] = { 0x04, 8 }, + [SCSCR] = { 0x08, 16 }, + [SCxTDR] = { 0x20, 8 }, + [SCxSR] = { 0x14, 16 }, + [SCxRDR] = { 0x24, 8 }, + [SCFCR] = { 0x18, 16 }, + [SCFDR] = { 0x1c, 16 }, + }, + .fifosize = 64, + .overrun_reg = SCxSR, + .overrun_mask = SCIFA_ORER, + .sampling_rate_mask = SCI_SR(16), + .error_mask = SCIF_DEFAULT_ERROR_MASK | SCIFA_ORER, + .error_clear = SCIF_ERROR_CLEAR & ~SCIFA_ORER, + }, +}; + +#define sci_getreg(up, offset) (&to_sci_port(up)->params->regs[offset]) + +/* + * The "offset" here is rather misleading, in that it refers to an enum + * value relative to the port mapping rather than the fixed offset + * itself, which needs to be manually retrieved from the platform's + * register map for the given port. + */ +static unsigned int sci_serial_in(struct uart_port *p, int offset) +{ + const struct plat_sci_reg *reg = sci_getreg(p, offset); + + if (reg->size == 8) + return ioread8(p->membase + (reg->offset << p->regshift)); + else if (reg->size == 16) + return ioread16(p->membase + (reg->offset << p->regshift)); + else + WARN(1, "Invalid register access\n"); + + return 0; +} + +static void sci_serial_out(struct uart_port *p, int offset, int value) +{ + const struct plat_sci_reg *reg = sci_getreg(p, offset); + + if (reg->size == 8) + iowrite8(value, p->membase + (reg->offset << p->regshift)); + else if (reg->size == 16) + iowrite16(value, p->membase + (reg->offset << p->regshift)); + else + WARN(1, "Invalid register access\n"); +} + +static void sci_port_enable(struct sci_port *sci_port) +{ + unsigned int i; + + if (!sci_port->port.dev) + return; + + pm_runtime_get_sync(sci_port->port.dev); + + for (i = 0; i < SCI_NUM_CLKS; i++) { + clk_prepare_enable(sci_port->clks[i]); + sci_port->clk_rates[i] = clk_get_rate(sci_port->clks[i]); + } + sci_port->port.uartclk = sci_port->clk_rates[SCI_FCK]; +} + +static void sci_port_disable(struct sci_port *sci_port) +{ + unsigned int i; + + if (!sci_port->port.dev) + return; + + for (i = SCI_NUM_CLKS; i-- > 0; ) + clk_disable_unprepare(sci_port->clks[i]); + + pm_runtime_put_sync(sci_port->port.dev); +} + +static inline unsigned long port_rx_irq_mask(struct uart_port *port) +{ + /* + * Not all ports (such as SCIFA) will support REIE. Rather than + * special-casing the port type, we check the port initialization + * IRQ enable mask to see whether the IRQ is desired at all. If + * it's unset, it's logically inferred that there's no point in + * testing for it. + */ + return SCSCR_RIE | (to_sci_port(port)->cfg->scscr & SCSCR_REIE); +} + +static void sci_start_tx(struct uart_port *port) +{ + struct sci_port *s = to_sci_port(port); + unsigned short ctrl; + +#ifdef CONFIG_SERIAL_SH_SCI_DMA + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { + u16 new, scr = serial_port_in(port, SCSCR); + if (s->chan_tx) + new = scr | SCSCR_TDRQE; + else + new = scr & ~SCSCR_TDRQE; + if (new != scr) + serial_port_out(port, SCSCR, new); + } + + if (s->chan_tx && !uart_circ_empty(&s->port.state->xmit) && + dma_submit_error(s->cookie_tx)) { + s->cookie_tx = 0; + schedule_work(&s->work_tx); + } +#endif + + if (!s->chan_tx || port->type == PORT_SCIFA || port->type == PORT_SCIFB) { + /* Set TIE (Transmit Interrupt Enable) bit in SCSCR */ + ctrl = serial_port_in(port, SCSCR); + serial_port_out(port, SCSCR, ctrl | SCSCR_TIE); + } +} + +static void sci_stop_tx(struct uart_port *port) +{ + unsigned short ctrl; + + /* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */ + ctrl = serial_port_in(port, SCSCR); + + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) + ctrl &= ~SCSCR_TDRQE; + + ctrl &= ~SCSCR_TIE; + + serial_port_out(port, SCSCR, ctrl); + +#ifdef CONFIG_SERIAL_SH_SCI_DMA + if (to_sci_port(port)->chan_tx && + !dma_submit_error(to_sci_port(port)->cookie_tx)) { + dmaengine_terminate_async(to_sci_port(port)->chan_tx); + to_sci_port(port)->cookie_tx = -EINVAL; + } +#endif +} + +static void sci_start_rx(struct uart_port *port) +{ + unsigned short ctrl; + + ctrl = serial_port_in(port, SCSCR) | port_rx_irq_mask(port); + + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) + ctrl &= ~SCSCR_RDRQE; + + serial_port_out(port, SCSCR, ctrl); +} + +static void sci_stop_rx(struct uart_port *port) +{ + unsigned short ctrl; + + ctrl = serial_port_in(port, SCSCR); + + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) + ctrl &= ~SCSCR_RDRQE; + + ctrl &= ~port_rx_irq_mask(port); + + serial_port_out(port, SCSCR, ctrl); +} + +static void sci_clear_SCxSR(struct uart_port *port, unsigned int mask) +{ + if (port->type == PORT_SCI) { + /* Just store the mask */ + serial_port_out(port, SCxSR, mask); + } else if (to_sci_port(port)->params->overrun_mask == SCIFA_ORER) { + /* SCIFA/SCIFB and SCIF on SH7705/SH7720/SH7721 */ + /* Only clear the status bits we want to clear */ + serial_port_out(port, SCxSR, + serial_port_in(port, SCxSR) & mask); + } else { + /* Store the mask, clear parity/framing errors */ + serial_port_out(port, SCxSR, mask & ~(SCIF_FERC | SCIF_PERC)); + } +} + +#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_SH_SCI_CONSOLE) || \ + defined(CONFIG_SERIAL_SH_SCI_EARLYCON) + +#ifdef CONFIG_CONSOLE_POLL +static int sci_poll_get_char(struct uart_port *port) +{ + unsigned short status; + int c; + + do { + status = serial_port_in(port, SCxSR); + if (status & SCxSR_ERRORS(port)) { + sci_clear_SCxSR(port, SCxSR_ERROR_CLEAR(port)); + continue; + } + break; + } while (1); + + if (!(status & SCxSR_RDxF(port))) + return NO_POLL_CHAR; + + c = serial_port_in(port, SCxRDR); + + /* Dummy read */ + serial_port_in(port, SCxSR); + sci_clear_SCxSR(port, SCxSR_RDxF_CLEAR(port)); + + return c; +} +#endif + +static void sci_poll_put_char(struct uart_port *port, unsigned char c) +{ + unsigned short status; + + do { + status = serial_port_in(port, SCxSR); + } while (!(status & SCxSR_TDxE(port))); + + serial_port_out(port, SCxTDR, c); + sci_clear_SCxSR(port, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port)); +} +#endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE || + CONFIG_SERIAL_SH_SCI_EARLYCON */ + +static void sci_init_pins(struct uart_port *port, unsigned int cflag) +{ + struct sci_port *s = to_sci_port(port); + + /* + * Use port-specific handler if provided. + */ + if (s->cfg->ops && s->cfg->ops->init_pins) { + s->cfg->ops->init_pins(port, cflag); + return; + } + + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { + u16 data = serial_port_in(port, SCPDR); + u16 ctrl = serial_port_in(port, SCPCR); + + /* Enable RXD and TXD pin functions */ + ctrl &= ~(SCPCR_RXDC | SCPCR_TXDC); + if (to_sci_port(port)->has_rtscts) { + /* RTS# is output, active low, unless autorts */ + if (!(port->mctrl & TIOCM_RTS)) { + ctrl |= SCPCR_RTSC; + data |= SCPDR_RTSD; + } else if (!s->autorts) { + ctrl |= SCPCR_RTSC; + data &= ~SCPDR_RTSD; + } else { + /* Enable RTS# pin function */ + ctrl &= ~SCPCR_RTSC; + } + /* Enable CTS# pin function */ + ctrl &= ~SCPCR_CTSC; + } + serial_port_out(port, SCPDR, data); + serial_port_out(port, SCPCR, ctrl); + } else if (sci_getreg(port, SCSPTR)->size) { + u16 status = serial_port_in(port, SCSPTR); + + /* RTS# is always output; and active low, unless autorts */ + status |= SCSPTR_RTSIO; + if (!(port->mctrl & TIOCM_RTS)) + status |= SCSPTR_RTSDT; + else if (!s->autorts) + status &= ~SCSPTR_RTSDT; + /* CTS# and SCK are inputs */ + status &= ~(SCSPTR_CTSIO | SCSPTR_SCKIO); + serial_port_out(port, SCSPTR, status); + } +} + +static int sci_txfill(struct uart_port *port) +{ + struct sci_port *s = to_sci_port(port); + unsigned int fifo_mask = (s->params->fifosize << 1) - 1; + const struct plat_sci_reg *reg; + + reg = sci_getreg(port, SCTFDR); + if (reg->size) + return serial_port_in(port, SCTFDR) & fifo_mask; + + reg = sci_getreg(port, SCFDR); + if (reg->size) + return serial_port_in(port, SCFDR) >> 8; + + return !(serial_port_in(port, SCxSR) & SCI_TDRE); +} + +static int sci_txroom(struct uart_port *port) +{ + return port->fifosize - sci_txfill(port); +} + +static int sci_rxfill(struct uart_port *port) +{ + struct sci_port *s = to_sci_port(port); + unsigned int fifo_mask = (s->params->fifosize << 1) - 1; + const struct plat_sci_reg *reg; + + reg = sci_getreg(port, SCRFDR); + if (reg->size) + return serial_port_in(port, SCRFDR) & fifo_mask; + + reg = sci_getreg(port, SCFDR); + if (reg->size) + return serial_port_in(port, SCFDR) & fifo_mask; + + return (serial_port_in(port, SCxSR) & SCxSR_RDxF(port)) != 0; +} + +/* ********************************************************************** * + * the interrupt related routines * + * ********************************************************************** */ + +static void sci_transmit_chars(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + unsigned int stopped = uart_tx_stopped(port); + unsigned short status; + unsigned short ctrl; + int count; + + status = serial_port_in(port, SCxSR); + if (!(status & SCxSR_TDxE(port))) { + ctrl = serial_port_in(port, SCSCR); + if (uart_circ_empty(xmit)) + ctrl &= ~SCSCR_TIE; + else + ctrl |= SCSCR_TIE; + serial_port_out(port, SCSCR, ctrl); + return; + } + + count = sci_txroom(port); + + do { + unsigned char c; + + if (port->x_char) { + c = port->x_char; + port->x_char = 0; + } else if (!uart_circ_empty(xmit) && !stopped) { + c = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + } else { + break; + } + + serial_port_out(port, SCxTDR, c); + + port->icount.tx++; + } while (--count > 0); + + sci_clear_SCxSR(port, SCxSR_TDxE_CLEAR(port)); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + if (uart_circ_empty(xmit)) + sci_stop_tx(port); + +} + +/* On SH3, SCIF may read end-of-break as a space->mark char */ +#define STEPFN(c) ({int __c = (c); (((__c-1)|(__c)) == -1); }) + +static void sci_receive_chars(struct uart_port *port) +{ + struct tty_port *tport = &port->state->port; + int i, count, copied = 0; + unsigned short status; + unsigned char flag; + + status = serial_port_in(port, SCxSR); + if (!(status & SCxSR_RDxF(port))) + return; + + while (1) { + /* Don't copy more bytes than there is room for in the buffer */ + count = tty_buffer_request_room(tport, sci_rxfill(port)); + + /* If for any reason we can't copy more data, we're done! */ + if (count == 0) + break; + + if (port->type == PORT_SCI) { + char c = serial_port_in(port, SCxRDR); + if (uart_handle_sysrq_char(port, c)) + count = 0; + else + tty_insert_flip_char(tport, c, TTY_NORMAL); + } else { + for (i = 0; i < count; i++) { + char c; + + if (port->type == PORT_SCIF || + port->type == PORT_HSCIF) { + status = serial_port_in(port, SCxSR); + c = serial_port_in(port, SCxRDR); + } else { + c = serial_port_in(port, SCxRDR); + status = serial_port_in(port, SCxSR); + } + if (uart_handle_sysrq_char(port, c)) { + count--; i--; + continue; + } + + /* Store data and status */ + if (status & SCxSR_FER(port)) { + flag = TTY_FRAME; + port->icount.frame++; + dev_notice(port->dev, "frame error\n"); + } else if (status & SCxSR_PER(port)) { + flag = TTY_PARITY; + port->icount.parity++; + dev_notice(port->dev, "parity error\n"); + } else + flag = TTY_NORMAL; + + tty_insert_flip_char(tport, c, flag); + } + } + + serial_port_in(port, SCxSR); /* dummy read */ + sci_clear_SCxSR(port, SCxSR_RDxF_CLEAR(port)); + + copied += count; + port->icount.rx += count; + } + + if (copied) { + /* Tell the rest of the system the news. New characters! */ + tty_flip_buffer_push(tport); + } else { + /* TTY buffers full; read from RX reg to prevent lockup */ + serial_port_in(port, SCxRDR); + serial_port_in(port, SCxSR); /* dummy read */ + sci_clear_SCxSR(port, SCxSR_RDxF_CLEAR(port)); + } +} + +static int sci_handle_errors(struct uart_port *port) +{ + int copied = 0; + unsigned short status = serial_port_in(port, SCxSR); + struct tty_port *tport = &port->state->port; + struct sci_port *s = to_sci_port(port); + + /* Handle overruns */ + if (status & s->params->overrun_mask) { + port->icount.overrun++; + + /* overrun error */ + if (tty_insert_flip_char(tport, 0, TTY_OVERRUN)) + copied++; + + dev_notice(port->dev, "overrun error\n"); + } + + if (status & SCxSR_FER(port)) { + /* frame error */ + port->icount.frame++; + + if (tty_insert_flip_char(tport, 0, TTY_FRAME)) + copied++; + + dev_notice(port->dev, "frame error\n"); + } + + if (status & SCxSR_PER(port)) { + /* parity error */ + port->icount.parity++; + + if (tty_insert_flip_char(tport, 0, TTY_PARITY)) + copied++; + + dev_notice(port->dev, "parity error\n"); + } + + if (copied) + tty_flip_buffer_push(tport); + + return copied; +} + +static int sci_handle_fifo_overrun(struct uart_port *port) +{ + struct tty_port *tport = &port->state->port; + struct sci_port *s = to_sci_port(port); + const struct plat_sci_reg *reg; + int copied = 0; + u16 status; + + reg = sci_getreg(port, s->params->overrun_reg); + if (!reg->size) + return 0; + + status = serial_port_in(port, s->params->overrun_reg); + if (status & s->params->overrun_mask) { + status &= ~s->params->overrun_mask; + serial_port_out(port, s->params->overrun_reg, status); + + port->icount.overrun++; + + tty_insert_flip_char(tport, 0, TTY_OVERRUN); + tty_flip_buffer_push(tport); + + dev_dbg(port->dev, "overrun error\n"); + copied++; + } + + return copied; +} + +static int sci_handle_breaks(struct uart_port *port) +{ + int copied = 0; + unsigned short status = serial_port_in(port, SCxSR); + struct tty_port *tport = &port->state->port; + + if (uart_handle_break(port)) + return 0; + + if (status & SCxSR_BRK(port)) { + port->icount.brk++; + + /* Notify of BREAK */ + if (tty_insert_flip_char(tport, 0, TTY_BREAK)) + copied++; + + dev_dbg(port->dev, "BREAK detected\n"); + } + + if (copied) + tty_flip_buffer_push(tport); + + copied += sci_handle_fifo_overrun(port); + + return copied; +} + +static int scif_set_rtrg(struct uart_port *port, int rx_trig) +{ + unsigned int bits; + + if (rx_trig >= port->fifosize) + rx_trig = port->fifosize - 1; + if (rx_trig < 1) + rx_trig = 1; + + /* HSCIF can be set to an arbitrary level. */ + if (sci_getreg(port, HSRTRGR)->size) { + serial_port_out(port, HSRTRGR, rx_trig); + return rx_trig; + } + + switch (port->type) { + case PORT_SCIF: + if (rx_trig < 4) { + bits = 0; + rx_trig = 1; + } else if (rx_trig < 8) { + bits = SCFCR_RTRG0; + rx_trig = 4; + } else if (rx_trig < 14) { + bits = SCFCR_RTRG1; + rx_trig = 8; + } else { + bits = SCFCR_RTRG0 | SCFCR_RTRG1; + rx_trig = 14; + } + break; + case PORT_SCIFA: + case PORT_SCIFB: + if (rx_trig < 16) { + bits = 0; + rx_trig = 1; + } else if (rx_trig < 32) { + bits = SCFCR_RTRG0; + rx_trig = 16; + } else if (rx_trig < 48) { + bits = SCFCR_RTRG1; + rx_trig = 32; + } else { + bits = SCFCR_RTRG0 | SCFCR_RTRG1; + rx_trig = 48; + } + break; + default: + WARN(1, "unknown FIFO configuration"); + return 1; + } + + serial_port_out(port, SCFCR, + (serial_port_in(port, SCFCR) & + ~(SCFCR_RTRG1 | SCFCR_RTRG0)) | bits); + + return rx_trig; +} + +static int scif_rtrg_enabled(struct uart_port *port) +{ + if (sci_getreg(port, HSRTRGR)->size) + return serial_port_in(port, HSRTRGR) != 0; + else + return (serial_port_in(port, SCFCR) & + (SCFCR_RTRG0 | SCFCR_RTRG1)) != 0; +} + +static void rx_fifo_timer_fn(struct timer_list *t) +{ + struct sci_port *s = from_timer(s, t, rx_fifo_timer); + struct uart_port *port = &s->port; + + dev_dbg(port->dev, "Rx timed out\n"); + scif_set_rtrg(port, 1); +} + +static ssize_t rx_fifo_trigger_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct uart_port *port = dev_get_drvdata(dev); + struct sci_port *sci = to_sci_port(port); + + return sprintf(buf, "%d\n", sci->rx_trigger); +} + +static ssize_t rx_fifo_trigger_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct uart_port *port = dev_get_drvdata(dev); + struct sci_port *sci = to_sci_port(port); + int ret; + long r; + + ret = kstrtol(buf, 0, &r); + if (ret) + return ret; + + sci->rx_trigger = scif_set_rtrg(port, r); + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) + scif_set_rtrg(port, 1); + + return count; +} + +static DEVICE_ATTR_RW(rx_fifo_trigger); + +static ssize_t rx_fifo_timeout_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct uart_port *port = dev_get_drvdata(dev); + struct sci_port *sci = to_sci_port(port); + int v; + + if (port->type == PORT_HSCIF) + v = sci->hscif_tot >> HSSCR_TOT_SHIFT; + else + v = sci->rx_fifo_timeout; + + return sprintf(buf, "%d\n", v); +} + +static ssize_t rx_fifo_timeout_store(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct uart_port *port = dev_get_drvdata(dev); + struct sci_port *sci = to_sci_port(port); + int ret; + long r; + + ret = kstrtol(buf, 0, &r); + if (ret) + return ret; + + if (port->type == PORT_HSCIF) { + if (r < 0 || r > 3) + return -EINVAL; + sci->hscif_tot = r << HSSCR_TOT_SHIFT; + } else { + sci->rx_fifo_timeout = r; + scif_set_rtrg(port, 1); + if (r > 0) + timer_setup(&sci->rx_fifo_timer, rx_fifo_timer_fn, 0); + } + + return count; +} + +static DEVICE_ATTR_RW(rx_fifo_timeout); + + +#ifdef CONFIG_SERIAL_SH_SCI_DMA +static void sci_dma_tx_complete(void *arg) +{ + struct sci_port *s = arg; + struct uart_port *port = &s->port; + struct circ_buf *xmit = &port->state->xmit; + unsigned long flags; + + dev_dbg(port->dev, "%s(%d)\n", __func__, port->line); + + spin_lock_irqsave(&port->lock, flags); + + xmit->tail += s->tx_dma_len; + xmit->tail &= UART_XMIT_SIZE - 1; + + port->icount.tx += s->tx_dma_len; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (!uart_circ_empty(xmit)) { + s->cookie_tx = 0; + schedule_work(&s->work_tx); + } else { + s->cookie_tx = -EINVAL; + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { + u16 ctrl = serial_port_in(port, SCSCR); + serial_port_out(port, SCSCR, ctrl & ~SCSCR_TIE); + } + } + + spin_unlock_irqrestore(&port->lock, flags); +} + +/* Locking: called with port lock held */ +static int sci_dma_rx_push(struct sci_port *s, void *buf, size_t count) +{ + struct uart_port *port = &s->port; + struct tty_port *tport = &port->state->port; + int copied; + + copied = tty_insert_flip_string(tport, buf, count); + if (copied < count) + port->icount.buf_overrun++; + + port->icount.rx += copied; + + return copied; +} + +static int sci_dma_rx_find_active(struct sci_port *s) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(s->cookie_rx); i++) + if (s->active_rx == s->cookie_rx[i]) + return i; + + return -1; +} + +static void sci_dma_rx_chan_invalidate(struct sci_port *s) +{ + unsigned int i; + + s->chan_rx = NULL; + for (i = 0; i < ARRAY_SIZE(s->cookie_rx); i++) + s->cookie_rx[i] = -EINVAL; + s->active_rx = 0; +} + +static void sci_dma_rx_release(struct sci_port *s) +{ + struct dma_chan *chan = s->chan_rx_saved; + + s->chan_rx_saved = NULL; + sci_dma_rx_chan_invalidate(s); + dmaengine_terminate_sync(chan); + dma_free_coherent(chan->device->dev, s->buf_len_rx * 2, s->rx_buf[0], + sg_dma_address(&s->sg_rx[0])); + dma_release_channel(chan); +} + +static void start_hrtimer_us(struct hrtimer *hrt, unsigned long usec) +{ + long sec = usec / 1000000; + long nsec = (usec % 1000000) * 1000; + ktime_t t = ktime_set(sec, nsec); + + hrtimer_start(hrt, t, HRTIMER_MODE_REL); +} + +static void sci_dma_rx_reenable_irq(struct sci_port *s) +{ + struct uart_port *port = &s->port; + u16 scr; + + /* Direct new serial port interrupts back to CPU */ + scr = serial_port_in(port, SCSCR); + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { + scr &= ~SCSCR_RDRQE; + enable_irq(s->irqs[SCIx_RXI_IRQ]); + } + serial_port_out(port, SCSCR, scr | SCSCR_RIE); +} + +static void sci_dma_rx_complete(void *arg) +{ + struct sci_port *s = arg; + struct dma_chan *chan = s->chan_rx; + struct uart_port *port = &s->port; + struct dma_async_tx_descriptor *desc; + unsigned long flags; + int active, count = 0; + + dev_dbg(port->dev, "%s(%d) active cookie %d\n", __func__, port->line, + s->active_rx); + + spin_lock_irqsave(&port->lock, flags); + + active = sci_dma_rx_find_active(s); + if (active >= 0) + count = sci_dma_rx_push(s, s->rx_buf[active], s->buf_len_rx); + + start_hrtimer_us(&s->rx_timer, s->rx_timeout); + + if (count) + tty_flip_buffer_push(&port->state->port); + + desc = dmaengine_prep_slave_sg(s->chan_rx, &s->sg_rx[active], 1, + DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) + goto fail; + + desc->callback = sci_dma_rx_complete; + desc->callback_param = s; + s->cookie_rx[active] = dmaengine_submit(desc); + if (dma_submit_error(s->cookie_rx[active])) + goto fail; + + s->active_rx = s->cookie_rx[!active]; + + dma_async_issue_pending(chan); + + spin_unlock_irqrestore(&port->lock, flags); + dev_dbg(port->dev, "%s: cookie %d #%d, new active cookie %d\n", + __func__, s->cookie_rx[active], active, s->active_rx); + return; + +fail: + spin_unlock_irqrestore(&port->lock, flags); + dev_warn(port->dev, "Failed submitting Rx DMA descriptor\n"); + /* Switch to PIO */ + spin_lock_irqsave(&port->lock, flags); + dmaengine_terminate_async(chan); + sci_dma_rx_chan_invalidate(s); + sci_dma_rx_reenable_irq(s); + spin_unlock_irqrestore(&port->lock, flags); +} + +static void sci_dma_tx_release(struct sci_port *s) +{ + struct dma_chan *chan = s->chan_tx_saved; + + cancel_work_sync(&s->work_tx); + s->chan_tx_saved = s->chan_tx = NULL; + s->cookie_tx = -EINVAL; + dmaengine_terminate_sync(chan); + dma_unmap_single(chan->device->dev, s->tx_dma_addr, UART_XMIT_SIZE, + DMA_TO_DEVICE); + dma_release_channel(chan); +} + +static int sci_dma_rx_submit(struct sci_port *s, bool port_lock_held) +{ + struct dma_chan *chan = s->chan_rx; + struct uart_port *port = &s->port; + unsigned long flags; + int i; + + for (i = 0; i < 2; i++) { + struct scatterlist *sg = &s->sg_rx[i]; + struct dma_async_tx_descriptor *desc; + + desc = dmaengine_prep_slave_sg(chan, + sg, 1, DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) + goto fail; + + desc->callback = sci_dma_rx_complete; + desc->callback_param = s; + s->cookie_rx[i] = dmaengine_submit(desc); + if (dma_submit_error(s->cookie_rx[i])) + goto fail; + + } + + s->active_rx = s->cookie_rx[0]; + + dma_async_issue_pending(chan); + return 0; + +fail: + /* Switch to PIO */ + if (!port_lock_held) + spin_lock_irqsave(&port->lock, flags); + if (i) + dmaengine_terminate_async(chan); + sci_dma_rx_chan_invalidate(s); + sci_start_rx(port); + if (!port_lock_held) + spin_unlock_irqrestore(&port->lock, flags); + return -EAGAIN; +} + +static void sci_dma_tx_work_fn(struct work_struct *work) +{ + struct sci_port *s = container_of(work, struct sci_port, work_tx); + struct dma_async_tx_descriptor *desc; + struct dma_chan *chan = s->chan_tx; + struct uart_port *port = &s->port; + struct circ_buf *xmit = &port->state->xmit; + unsigned long flags; + dma_addr_t buf; + int head, tail; + + /* + * DMA is idle now. + * Port xmit buffer is already mapped, and it is one page... Just adjust + * offsets and lengths. Since it is a circular buffer, we have to + * transmit till the end, and then the rest. Take the port lock to get a + * consistent xmit buffer state. + */ + spin_lock_irq(&port->lock); + head = xmit->head; + tail = xmit->tail; + buf = s->tx_dma_addr + (tail & (UART_XMIT_SIZE - 1)); + s->tx_dma_len = min_t(unsigned int, + CIRC_CNT(head, tail, UART_XMIT_SIZE), + CIRC_CNT_TO_END(head, tail, UART_XMIT_SIZE)); + if (!s->tx_dma_len) { + /* Transmit buffer has been flushed */ + spin_unlock_irq(&port->lock); + return; + } + + desc = dmaengine_prep_slave_single(chan, buf, s->tx_dma_len, + DMA_MEM_TO_DEV, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) { + spin_unlock_irq(&port->lock); + dev_warn(port->dev, "Failed preparing Tx DMA descriptor\n"); + goto switch_to_pio; + } + + dma_sync_single_for_device(chan->device->dev, buf, s->tx_dma_len, + DMA_TO_DEVICE); + + desc->callback = sci_dma_tx_complete; + desc->callback_param = s; + s->cookie_tx = dmaengine_submit(desc); + if (dma_submit_error(s->cookie_tx)) { + spin_unlock_irq(&port->lock); + dev_warn(port->dev, "Failed submitting Tx DMA descriptor\n"); + goto switch_to_pio; + } + + spin_unlock_irq(&port->lock); + dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n", + __func__, xmit->buf, tail, head, s->cookie_tx); + + dma_async_issue_pending(chan); + return; + +switch_to_pio: + spin_lock_irqsave(&port->lock, flags); + s->chan_tx = NULL; + sci_start_tx(port); + spin_unlock_irqrestore(&port->lock, flags); + return; +} + +static enum hrtimer_restart sci_dma_rx_timer_fn(struct hrtimer *t) +{ + struct sci_port *s = container_of(t, struct sci_port, rx_timer); + struct dma_chan *chan = s->chan_rx; + struct uart_port *port = &s->port; + struct dma_tx_state state; + enum dma_status status; + unsigned long flags; + unsigned int read; + int active, count; + + dev_dbg(port->dev, "DMA Rx timed out\n"); + + spin_lock_irqsave(&port->lock, flags); + + active = sci_dma_rx_find_active(s); + if (active < 0) { + spin_unlock_irqrestore(&port->lock, flags); + return HRTIMER_NORESTART; + } + + status = dmaengine_tx_status(s->chan_rx, s->active_rx, &state); + if (status == DMA_COMPLETE) { + spin_unlock_irqrestore(&port->lock, flags); + dev_dbg(port->dev, "Cookie %d #%d has already completed\n", + s->active_rx, active); + + /* Let packet complete handler take care of the packet */ + return HRTIMER_NORESTART; + } + + dmaengine_pause(chan); + + /* + * sometimes DMA transfer doesn't stop even if it is stopped and + * data keeps on coming until transaction is complete so check + * for DMA_COMPLETE again + * Let packet complete handler take care of the packet + */ + status = dmaengine_tx_status(s->chan_rx, s->active_rx, &state); + if (status == DMA_COMPLETE) { + spin_unlock_irqrestore(&port->lock, flags); + dev_dbg(port->dev, "Transaction complete after DMA engine was stopped"); + return HRTIMER_NORESTART; + } + + /* Handle incomplete DMA receive */ + dmaengine_terminate_async(s->chan_rx); + read = sg_dma_len(&s->sg_rx[active]) - state.residue; + + if (read) { + count = sci_dma_rx_push(s, s->rx_buf[active], read); + if (count) + tty_flip_buffer_push(&port->state->port); + } + + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) + sci_dma_rx_submit(s, true); + + sci_dma_rx_reenable_irq(s); + + spin_unlock_irqrestore(&port->lock, flags); + + return HRTIMER_NORESTART; +} + +static struct dma_chan *sci_request_dma_chan(struct uart_port *port, + enum dma_transfer_direction dir) +{ + struct dma_chan *chan; + struct dma_slave_config cfg; + int ret; + + chan = dma_request_slave_channel(port->dev, + dir == DMA_MEM_TO_DEV ? "tx" : "rx"); + if (!chan) { + dev_dbg(port->dev, "dma_request_slave_channel failed\n"); + return NULL; + } + + memset(&cfg, 0, sizeof(cfg)); + cfg.direction = dir; + if (dir == DMA_MEM_TO_DEV) { + cfg.dst_addr = port->mapbase + + (sci_getreg(port, SCxTDR)->offset << port->regshift); + cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + } else { + cfg.src_addr = port->mapbase + + (sci_getreg(port, SCxRDR)->offset << port->regshift); + cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + } + + ret = dmaengine_slave_config(chan, &cfg); + if (ret) { + dev_warn(port->dev, "dmaengine_slave_config failed %d\n", ret); + dma_release_channel(chan); + return NULL; + } + + return chan; +} + +static void sci_request_dma(struct uart_port *port) +{ + struct sci_port *s = to_sci_port(port); + struct dma_chan *chan; + + dev_dbg(port->dev, "%s: port %d\n", __func__, port->line); + + /* + * DMA on console may interfere with Kernel log messages which use + * plain putchar(). So, simply don't use it with a console. + */ + if (uart_console(port)) + return; + + if (!port->dev->of_node) + return; + + s->cookie_tx = -EINVAL; + + /* + * Don't request a dma channel if no channel was specified + * in the device tree. + */ + if (!of_find_property(port->dev->of_node, "dmas", NULL)) + return; + + chan = sci_request_dma_chan(port, DMA_MEM_TO_DEV); + dev_dbg(port->dev, "%s: TX: got channel %p\n", __func__, chan); + if (chan) { + /* UART circular tx buffer is an aligned page. */ + s->tx_dma_addr = dma_map_single(chan->device->dev, + port->state->xmit.buf, + UART_XMIT_SIZE, + DMA_TO_DEVICE); + if (dma_mapping_error(chan->device->dev, s->tx_dma_addr)) { + dev_warn(port->dev, "Failed mapping Tx DMA descriptor\n"); + dma_release_channel(chan); + } else { + dev_dbg(port->dev, "%s: mapped %lu@%p to %pad\n", + __func__, UART_XMIT_SIZE, + port->state->xmit.buf, &s->tx_dma_addr); + + INIT_WORK(&s->work_tx, sci_dma_tx_work_fn); + s->chan_tx_saved = s->chan_tx = chan; + } + } + + chan = sci_request_dma_chan(port, DMA_DEV_TO_MEM); + dev_dbg(port->dev, "%s: RX: got channel %p\n", __func__, chan); + if (chan) { + unsigned int i; + dma_addr_t dma; + void *buf; + + s->buf_len_rx = 2 * max_t(size_t, 16, port->fifosize); + buf = dma_alloc_coherent(chan->device->dev, s->buf_len_rx * 2, + &dma, GFP_KERNEL); + if (!buf) { + dev_warn(port->dev, + "Failed to allocate Rx dma buffer, using PIO\n"); + dma_release_channel(chan); + return; + } + + for (i = 0; i < 2; i++) { + struct scatterlist *sg = &s->sg_rx[i]; + + sg_init_table(sg, 1); + s->rx_buf[i] = buf; + sg_dma_address(sg) = dma; + sg_dma_len(sg) = s->buf_len_rx; + + buf += s->buf_len_rx; + dma += s->buf_len_rx; + } + + hrtimer_init(&s->rx_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + s->rx_timer.function = sci_dma_rx_timer_fn; + + s->chan_rx_saved = s->chan_rx = chan; + + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) + sci_dma_rx_submit(s, false); + } +} + +static void sci_free_dma(struct uart_port *port) +{ + struct sci_port *s = to_sci_port(port); + + if (s->chan_tx_saved) + sci_dma_tx_release(s); + if (s->chan_rx_saved) + sci_dma_rx_release(s); +} + +static void sci_flush_buffer(struct uart_port *port) +{ + struct sci_port *s = to_sci_port(port); + + /* + * In uart_flush_buffer(), the xmit circular buffer has just been + * cleared, so we have to reset tx_dma_len accordingly, and stop any + * pending transfers + */ + s->tx_dma_len = 0; + if (s->chan_tx) { + dmaengine_terminate_async(s->chan_tx); + s->cookie_tx = -EINVAL; + } +} +#else /* !CONFIG_SERIAL_SH_SCI_DMA */ +static inline void sci_request_dma(struct uart_port *port) +{ +} + +static inline void sci_free_dma(struct uart_port *port) +{ +} + +#define sci_flush_buffer NULL +#endif /* !CONFIG_SERIAL_SH_SCI_DMA */ + +static irqreturn_t sci_rx_interrupt(int irq, void *ptr) +{ + struct uart_port *port = ptr; + struct sci_port *s = to_sci_port(port); + +#ifdef CONFIG_SERIAL_SH_SCI_DMA + if (s->chan_rx) { + u16 scr = serial_port_in(port, SCSCR); + u16 ssr = serial_port_in(port, SCxSR); + + /* Disable future Rx interrupts */ + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { + disable_irq_nosync(irq); + scr |= SCSCR_RDRQE; + } else { + if (sci_dma_rx_submit(s, false) < 0) + goto handle_pio; + + scr &= ~SCSCR_RIE; + } + serial_port_out(port, SCSCR, scr); + /* Clear current interrupt */ + serial_port_out(port, SCxSR, + ssr & ~(SCIF_DR | SCxSR_RDxF(port))); + dev_dbg(port->dev, "Rx IRQ %lu: setup t-out in %u us\n", + jiffies, s->rx_timeout); + start_hrtimer_us(&s->rx_timer, s->rx_timeout); + + return IRQ_HANDLED; + } + +handle_pio: +#endif + + if (s->rx_trigger > 1 && s->rx_fifo_timeout > 0) { + if (!scif_rtrg_enabled(port)) + scif_set_rtrg(port, s->rx_trigger); + + mod_timer(&s->rx_fifo_timer, jiffies + DIV_ROUND_UP( + s->rx_frame * HZ * s->rx_fifo_timeout, 1000000)); + } + + /* I think sci_receive_chars has to be called irrespective + * of whether the I_IXOFF is set, otherwise, how is the interrupt + * to be disabled? + */ + sci_receive_chars(port); + + return IRQ_HANDLED; +} + +static irqreturn_t sci_tx_interrupt(int irq, void *ptr) +{ + struct uart_port *port = ptr; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + sci_transmit_chars(port); + spin_unlock_irqrestore(&port->lock, flags); + + return IRQ_HANDLED; +} + +static irqreturn_t sci_br_interrupt(int irq, void *ptr) +{ + struct uart_port *port = ptr; + + /* Handle BREAKs */ + sci_handle_breaks(port); + + /* drop invalid character received before break was detected */ + serial_port_in(port, SCxRDR); + + sci_clear_SCxSR(port, SCxSR_BREAK_CLEAR(port)); + + return IRQ_HANDLED; +} + +static irqreturn_t sci_er_interrupt(int irq, void *ptr) +{ + struct uart_port *port = ptr; + struct sci_port *s = to_sci_port(port); + + if (s->irqs[SCIx_ERI_IRQ] == s->irqs[SCIx_BRI_IRQ]) { + /* Break and Error interrupts are muxed */ + unsigned short ssr_status = serial_port_in(port, SCxSR); + + /* Break Interrupt */ + if (ssr_status & SCxSR_BRK(port)) + sci_br_interrupt(irq, ptr); + + /* Break only? */ + if (!(ssr_status & SCxSR_ERRORS(port))) + return IRQ_HANDLED; + } + + /* Handle errors */ + if (port->type == PORT_SCI) { + if (sci_handle_errors(port)) { + /* discard character in rx buffer */ + serial_port_in(port, SCxSR); + sci_clear_SCxSR(port, SCxSR_RDxF_CLEAR(port)); + } + } else { + sci_handle_fifo_overrun(port); + if (!s->chan_rx) + sci_receive_chars(port); + } + + sci_clear_SCxSR(port, SCxSR_ERROR_CLEAR(port)); + + /* Kick the transmission */ + if (!s->chan_tx) + sci_tx_interrupt(irq, ptr); + + return IRQ_HANDLED; +} + +static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr) +{ + unsigned short ssr_status, scr_status, err_enabled, orer_status = 0; + struct uart_port *port = ptr; + struct sci_port *s = to_sci_port(port); + irqreturn_t ret = IRQ_NONE; + + ssr_status = serial_port_in(port, SCxSR); + scr_status = serial_port_in(port, SCSCR); + if (s->params->overrun_reg == SCxSR) + orer_status = ssr_status; + else if (sci_getreg(port, s->params->overrun_reg)->size) + orer_status = serial_port_in(port, s->params->overrun_reg); + + err_enabled = scr_status & port_rx_irq_mask(port); + + /* Tx Interrupt */ + if ((ssr_status & SCxSR_TDxE(port)) && (scr_status & SCSCR_TIE) && + !s->chan_tx) + ret = sci_tx_interrupt(irq, ptr); + + /* + * Rx Interrupt: if we're using DMA, the DMA controller clears RDF / + * DR flags + */ + if (((ssr_status & SCxSR_RDxF(port)) || s->chan_rx) && + (scr_status & SCSCR_RIE)) + ret = sci_rx_interrupt(irq, ptr); + + /* Error Interrupt */ + if ((ssr_status & SCxSR_ERRORS(port)) && err_enabled) + ret = sci_er_interrupt(irq, ptr); + + /* Break Interrupt */ + if (s->irqs[SCIx_ERI_IRQ] != s->irqs[SCIx_BRI_IRQ] && + (ssr_status & SCxSR_BRK(port)) && err_enabled) + ret = sci_br_interrupt(irq, ptr); + + /* Overrun Interrupt */ + if (orer_status & s->params->overrun_mask) { + sci_handle_fifo_overrun(port); + ret = IRQ_HANDLED; + } + + return ret; +} + +static const struct sci_irq_desc { + const char *desc; + irq_handler_t handler; +} sci_irq_desc[] = { + /* + * Split out handlers, the default case. + */ + [SCIx_ERI_IRQ] = { + .desc = "rx err", + .handler = sci_er_interrupt, + }, + + [SCIx_RXI_IRQ] = { + .desc = "rx full", + .handler = sci_rx_interrupt, + }, + + [SCIx_TXI_IRQ] = { + .desc = "tx empty", + .handler = sci_tx_interrupt, + }, + + [SCIx_BRI_IRQ] = { + .desc = "break", + .handler = sci_br_interrupt, + }, + + [SCIx_DRI_IRQ] = { + .desc = "rx ready", + .handler = sci_rx_interrupt, + }, + + [SCIx_TEI_IRQ] = { + .desc = "tx end", + .handler = sci_tx_interrupt, + }, + + /* + * Special muxed handler. + */ + [SCIx_MUX_IRQ] = { + .desc = "mux", + .handler = sci_mpxed_interrupt, + }, +}; + +static int sci_request_irq(struct sci_port *port) +{ + struct uart_port *up = &port->port; + int i, j, w, ret = 0; + + for (i = j = 0; i < SCIx_NR_IRQS; i++, j++) { + const struct sci_irq_desc *desc; + int irq; + + /* Check if already registered (muxed) */ + for (w = 0; w < i; w++) + if (port->irqs[w] == port->irqs[i]) + w = i + 1; + if (w > i) + continue; + + if (SCIx_IRQ_IS_MUXED(port)) { + i = SCIx_MUX_IRQ; + irq = up->irq; + } else { + irq = port->irqs[i]; + + /* + * Certain port types won't support all of the + * available interrupt sources. + */ + if (unlikely(irq < 0)) + continue; + } + + desc = sci_irq_desc + i; + port->irqstr[j] = kasprintf(GFP_KERNEL, "%s:%s", + dev_name(up->dev), desc->desc); + if (!port->irqstr[j]) { + ret = -ENOMEM; + goto out_nomem; + } + + ret = request_irq(irq, desc->handler, up->irqflags, + port->irqstr[j], port); + if (unlikely(ret)) { + dev_err(up->dev, "Can't allocate %s IRQ\n", desc->desc); + goto out_noirq; + } + } + + return 0; + +out_noirq: + while (--i >= 0) + free_irq(port->irqs[i], port); + +out_nomem: + while (--j >= 0) + kfree(port->irqstr[j]); + + return ret; +} + +static void sci_free_irq(struct sci_port *port) +{ + int i, j; + + /* + * Intentionally in reverse order so we iterate over the muxed + * IRQ first. + */ + for (i = 0; i < SCIx_NR_IRQS; i++) { + int irq = port->irqs[i]; + + /* + * Certain port types won't support all of the available + * interrupt sources. + */ + if (unlikely(irq < 0)) + continue; + + /* Check if already freed (irq was muxed) */ + for (j = 0; j < i; j++) + if (port->irqs[j] == irq) + j = i + 1; + if (j > i) + continue; + + free_irq(port->irqs[i], port); + kfree(port->irqstr[i]); + + if (SCIx_IRQ_IS_MUXED(port)) { + /* If there's only one IRQ, we're done. */ + return; + } + } +} + +static unsigned int sci_tx_empty(struct uart_port *port) +{ + unsigned short status = serial_port_in(port, SCxSR); + unsigned short in_tx_fifo = sci_txfill(port); + + return (status & SCxSR_TEND(port)) && !in_tx_fifo ? TIOCSER_TEMT : 0; +} + +static void sci_set_rts(struct uart_port *port, bool state) +{ + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { + u16 data = serial_port_in(port, SCPDR); + + /* Active low */ + if (state) + data &= ~SCPDR_RTSD; + else + data |= SCPDR_RTSD; + serial_port_out(port, SCPDR, data); + + /* RTS# is output */ + serial_port_out(port, SCPCR, + serial_port_in(port, SCPCR) | SCPCR_RTSC); + } else if (sci_getreg(port, SCSPTR)->size) { + u16 ctrl = serial_port_in(port, SCSPTR); + + /* Active low */ + if (state) + ctrl &= ~SCSPTR_RTSDT; + else + ctrl |= SCSPTR_RTSDT; + serial_port_out(port, SCSPTR, ctrl); + } +} + +static bool sci_get_cts(struct uart_port *port) +{ + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { + /* Active low */ + return !(serial_port_in(port, SCPDR) & SCPDR_CTSD); + } else if (sci_getreg(port, SCSPTR)->size) { + /* Active low */ + return !(serial_port_in(port, SCSPTR) & SCSPTR_CTSDT); + } + + return true; +} + +/* + * Modem control is a bit of a mixed bag for SCI(F) ports. Generally + * CTS/RTS is supported in hardware by at least one port and controlled + * via SCSPTR (SCxPCR for SCIFA/B parts), or external pins (presently + * handled via the ->init_pins() op, which is a bit of a one-way street, + * lacking any ability to defer pin control -- this will later be + * converted over to the GPIO framework). + * + * Other modes (such as loopback) are supported generically on certain + * port types, but not others. For these it's sufficient to test for the + * existence of the support register and simply ignore the port type. + */ +static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct sci_port *s = to_sci_port(port); + + if (mctrl & TIOCM_LOOP) { + const struct plat_sci_reg *reg; + + /* + * Standard loopback mode for SCFCR ports. + */ + reg = sci_getreg(port, SCFCR); + if (reg->size) + serial_port_out(port, SCFCR, + serial_port_in(port, SCFCR) | + SCFCR_LOOP); + } + + mctrl_gpio_set(s->gpios, mctrl); + + if (!s->has_rtscts) + return; + + if (!(mctrl & TIOCM_RTS)) { + /* Disable Auto RTS */ + serial_port_out(port, SCFCR, + serial_port_in(port, SCFCR) & ~SCFCR_MCE); + + /* Clear RTS */ + sci_set_rts(port, 0); + } else if (s->autorts) { + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { + /* Enable RTS# pin function */ + serial_port_out(port, SCPCR, + serial_port_in(port, SCPCR) & ~SCPCR_RTSC); + } + + /* Enable Auto RTS */ + serial_port_out(port, SCFCR, + serial_port_in(port, SCFCR) | SCFCR_MCE); + } else { + /* Set RTS */ + sci_set_rts(port, 1); + } +} + +static unsigned int sci_get_mctrl(struct uart_port *port) +{ + struct sci_port *s = to_sci_port(port); + struct mctrl_gpios *gpios = s->gpios; + unsigned int mctrl = 0; + + mctrl_gpio_get(gpios, &mctrl); + + /* + * CTS/RTS is handled in hardware when supported, while nothing + * else is wired up. + */ + if (s->autorts) { + if (sci_get_cts(port)) + mctrl |= TIOCM_CTS; + } else if (!mctrl_gpio_to_gpiod(gpios, UART_GPIO_CTS)) { + mctrl |= TIOCM_CTS; + } + if (!mctrl_gpio_to_gpiod(gpios, UART_GPIO_DSR)) + mctrl |= TIOCM_DSR; + if (!mctrl_gpio_to_gpiod(gpios, UART_GPIO_DCD)) + mctrl |= TIOCM_CAR; + + return mctrl; +} + +static void sci_enable_ms(struct uart_port *port) +{ + mctrl_gpio_enable_ms(to_sci_port(port)->gpios); +} + +static void sci_break_ctl(struct uart_port *port, int break_state) +{ + unsigned short scscr, scsptr; + unsigned long flags; + + /* check wheter the port has SCSPTR */ + if (!sci_getreg(port, SCSPTR)->size) { + /* + * Not supported by hardware. Most parts couple break and rx + * interrupts together, with break detection always enabled. + */ + return; + } + + spin_lock_irqsave(&port->lock, flags); + scsptr = serial_port_in(port, SCSPTR); + scscr = serial_port_in(port, SCSCR); + + if (break_state == -1) { + scsptr = (scsptr | SCSPTR_SPB2IO) & ~SCSPTR_SPB2DT; + scscr &= ~SCSCR_TE; + } else { + scsptr = (scsptr | SCSPTR_SPB2DT) & ~SCSPTR_SPB2IO; + scscr |= SCSCR_TE; + } + + serial_port_out(port, SCSPTR, scsptr); + serial_port_out(port, SCSCR, scscr); + spin_unlock_irqrestore(&port->lock, flags); +} + +static int sci_startup(struct uart_port *port) +{ + struct sci_port *s = to_sci_port(port); + int ret; + + dev_dbg(port->dev, "%s(%d)\n", __func__, port->line); + + sci_request_dma(port); + + ret = sci_request_irq(s); + if (unlikely(ret < 0)) { + sci_free_dma(port); + return ret; + } + + return 0; +} + +static void sci_shutdown(struct uart_port *port) +{ + struct sci_port *s = to_sci_port(port); + unsigned long flags; + u16 scr; + + dev_dbg(port->dev, "%s(%d)\n", __func__, port->line); + + s->autorts = false; + mctrl_gpio_disable_ms(to_sci_port(port)->gpios); + + spin_lock_irqsave(&port->lock, flags); + sci_stop_rx(port); + sci_stop_tx(port); + /* + * Stop RX and TX, disable related interrupts, keep clock source + * and HSCIF TOT bits + */ + scr = serial_port_in(port, SCSCR); + serial_port_out(port, SCSCR, scr & + (SCSCR_CKE1 | SCSCR_CKE0 | s->hscif_tot)); + spin_unlock_irqrestore(&port->lock, flags); + +#ifdef CONFIG_SERIAL_SH_SCI_DMA + if (s->chan_rx_saved) { + dev_dbg(port->dev, "%s(%d) deleting rx_timer\n", __func__, + port->line); + hrtimer_cancel(&s->rx_timer); + } +#endif + + if (s->rx_trigger > 1 && s->rx_fifo_timeout > 0) + del_timer_sync(&s->rx_fifo_timer); + sci_free_irq(s); + sci_free_dma(port); +} + +static int sci_sck_calc(struct sci_port *s, unsigned int bps, + unsigned int *srr) +{ + unsigned long freq = s->clk_rates[SCI_SCK]; + int err, min_err = INT_MAX; + unsigned int sr; + + if (s->port.type != PORT_HSCIF) + freq *= 2; + + for_each_sr(sr, s) { + err = DIV_ROUND_CLOSEST(freq, sr) - bps; + if (abs(err) >= abs(min_err)) + continue; + + min_err = err; + *srr = sr - 1; + + if (!err) + break; + } + + dev_dbg(s->port.dev, "SCK: %u%+d bps using SR %u\n", bps, min_err, + *srr + 1); + return min_err; +} + +static int sci_brg_calc(struct sci_port *s, unsigned int bps, + unsigned long freq, unsigned int *dlr, + unsigned int *srr) +{ + int err, min_err = INT_MAX; + unsigned int sr, dl; + + if (s->port.type != PORT_HSCIF) + freq *= 2; + + for_each_sr(sr, s) { + dl = DIV_ROUND_CLOSEST(freq, sr * bps); + dl = clamp(dl, 1U, 65535U); + + err = DIV_ROUND_CLOSEST(freq, sr * dl) - bps; + if (abs(err) >= abs(min_err)) + continue; + + min_err = err; + *dlr = dl; + *srr = sr - 1; + + if (!err) + break; + } + + dev_dbg(s->port.dev, "BRG: %u%+d bps using DL %u SR %u\n", bps, + min_err, *dlr, *srr + 1); + return min_err; +} + +/* calculate sample rate, BRR, and clock select */ +static int sci_scbrr_calc(struct sci_port *s, unsigned int bps, + unsigned int *brr, unsigned int *srr, + unsigned int *cks) +{ + unsigned long freq = s->clk_rates[SCI_FCK]; + unsigned int sr, br, prediv, scrate, c; + int err, min_err = INT_MAX; + + if (s->port.type != PORT_HSCIF) + freq *= 2; + + /* + * Find the combination of sample rate and clock select with the + * smallest deviation from the desired baud rate. + * Prefer high sample rates to maximise the receive margin. + * + * M: Receive margin (%) + * N: Ratio of bit rate to clock (N = sampling rate) + * D: Clock duty (D = 0 to 1.0) + * L: Frame length (L = 9 to 12) + * F: Absolute value of clock frequency deviation + * + * M = |(0.5 - 1 / 2 * N) - ((L - 0.5) * F) - + * (|D - 0.5| / N * (1 + F))| + * NOTE: Usually, treat D for 0.5, F is 0 by this calculation. + */ + for_each_sr(sr, s) { + for (c = 0; c <= 3; c++) { + /* integerized formulas from HSCIF documentation */ + prediv = sr * (1 << (2 * c + 1)); + + /* + * We need to calculate: + * + * br = freq / (prediv * bps) clamped to [1..256] + * err = freq / (br * prediv) - bps + * + * Watch out for overflow when calculating the desired + * sampling clock rate! + */ + if (bps > UINT_MAX / prediv) + break; + + scrate = prediv * bps; + br = DIV_ROUND_CLOSEST(freq, scrate); + br = clamp(br, 1U, 256U); + + err = DIV_ROUND_CLOSEST(freq, br * prediv) - bps; + if (abs(err) >= abs(min_err)) + continue; + + min_err = err; + *brr = br - 1; + *srr = sr - 1; + *cks = c; + + if (!err) + goto found; + } + } + +found: + dev_dbg(s->port.dev, "BRR: %u%+d bps using N %u SR %u cks %u\n", bps, + min_err, *brr, *srr + 1, *cks); + return min_err; +} + +static void sci_reset(struct uart_port *port) +{ + const struct plat_sci_reg *reg; + unsigned int status; + struct sci_port *s = to_sci_port(port); + + serial_port_out(port, SCSCR, s->hscif_tot); /* TE=0, RE=0, CKE1=0 */ + + reg = sci_getreg(port, SCFCR); + if (reg->size) + serial_port_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST); + + sci_clear_SCxSR(port, + SCxSR_RDxF_CLEAR(port) & SCxSR_ERROR_CLEAR(port) & + SCxSR_BREAK_CLEAR(port)); + if (sci_getreg(port, SCLSR)->size) { + status = serial_port_in(port, SCLSR); + status &= ~(SCLSR_TO | SCLSR_ORER); + serial_port_out(port, SCLSR, status); + } + + if (s->rx_trigger > 1) { + if (s->rx_fifo_timeout) { + scif_set_rtrg(port, 1); + timer_setup(&s->rx_fifo_timer, rx_fifo_timer_fn, 0); + } else { + if (port->type == PORT_SCIFA || + port->type == PORT_SCIFB) + scif_set_rtrg(port, 1); + else + scif_set_rtrg(port, s->rx_trigger); + } + } +} + +static void sci_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + unsigned int baud, smr_val = SCSMR_ASYNC, scr_val = 0, i, bits; + unsigned int brr = 255, cks = 0, srr = 15, dl = 0, sccks = 0; + unsigned int brr1 = 255, cks1 = 0, srr1 = 15, dl1 = 0; + struct sci_port *s = to_sci_port(port); + const struct plat_sci_reg *reg; + int min_err = INT_MAX, err; + unsigned long max_freq = 0; + int best_clk = -1; + unsigned long flags; + + if ((termios->c_cflag & CSIZE) == CS7) { + smr_val |= SCSMR_CHR; + } else { + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= CS8; + } + if (termios->c_cflag & PARENB) + smr_val |= SCSMR_PE; + if (termios->c_cflag & PARODD) + smr_val |= SCSMR_PE | SCSMR_ODD; + if (termios->c_cflag & CSTOPB) + smr_val |= SCSMR_STOP; + + /* + * earlyprintk comes here early on with port->uartclk set to zero. + * the clock framework is not up and running at this point so here + * we assume that 115200 is the maximum baud rate. please note that + * the baud rate is not programmed during earlyprintk - it is assumed + * that the previous boot loader has enabled required clocks and + * setup the baud rate generator hardware for us already. + */ + if (!port->uartclk) { + baud = uart_get_baud_rate(port, termios, old, 0, 115200); + goto done; + } + + for (i = 0; i < SCI_NUM_CLKS; i++) + max_freq = max(max_freq, s->clk_rates[i]); + + baud = uart_get_baud_rate(port, termios, old, 0, max_freq / min_sr(s)); + if (!baud) + goto done; + + /* + * There can be multiple sources for the sampling clock. Find the one + * that gives us the smallest deviation from the desired baud rate. + */ + + /* Optional Undivided External Clock */ + if (s->clk_rates[SCI_SCK] && port->type != PORT_SCIFA && + port->type != PORT_SCIFB) { + err = sci_sck_calc(s, baud, &srr1); + if (abs(err) < abs(min_err)) { + best_clk = SCI_SCK; + scr_val = SCSCR_CKE1; + sccks = SCCKS_CKS; + min_err = err; + srr = srr1; + if (!err) + goto done; + } + } + + /* Optional BRG Frequency Divided External Clock */ + if (s->clk_rates[SCI_SCIF_CLK] && sci_getreg(port, SCDL)->size) { + err = sci_brg_calc(s, baud, s->clk_rates[SCI_SCIF_CLK], &dl1, + &srr1); + if (abs(err) < abs(min_err)) { + best_clk = SCI_SCIF_CLK; + scr_val = SCSCR_CKE1; + sccks = 0; + min_err = err; + dl = dl1; + srr = srr1; + if (!err) + goto done; + } + } + + /* Optional BRG Frequency Divided Internal Clock */ + if (s->clk_rates[SCI_BRG_INT] && sci_getreg(port, SCDL)->size) { + err = sci_brg_calc(s, baud, s->clk_rates[SCI_BRG_INT], &dl1, + &srr1); + if (abs(err) < abs(min_err)) { + best_clk = SCI_BRG_INT; + scr_val = SCSCR_CKE1; + sccks = SCCKS_XIN; + min_err = err; + dl = dl1; + srr = srr1; + if (!min_err) + goto done; + } + } + + /* Divided Functional Clock using standard Bit Rate Register */ + err = sci_scbrr_calc(s, baud, &brr1, &srr1, &cks1); + if (abs(err) < abs(min_err)) { + best_clk = SCI_FCK; + scr_val = 0; + min_err = err; + brr = brr1; + srr = srr1; + cks = cks1; + } + +done: + if (best_clk >= 0) + dev_dbg(port->dev, "Using clk %pC for %u%+d bps\n", + s->clks[best_clk], baud, min_err); + + sci_port_enable(s); + + /* + * Program the optional External Baud Rate Generator (BRG) first. + * It controls the mux to select (H)SCK or frequency divided clock. + */ + if (best_clk >= 0 && sci_getreg(port, SCCKS)->size) { + serial_port_out(port, SCDL, dl); + serial_port_out(port, SCCKS, sccks); + } + + spin_lock_irqsave(&port->lock, flags); + + sci_reset(port); + + uart_update_timeout(port, termios->c_cflag, baud); + + /* byte size and parity */ + switch (termios->c_cflag & CSIZE) { + case CS5: + bits = 7; + break; + case CS6: + bits = 8; + break; + case CS7: + bits = 9; + break; + default: + bits = 10; + break; + } + + if (termios->c_cflag & CSTOPB) + bits++; + if (termios->c_cflag & PARENB) + bits++; + + if (best_clk >= 0) { + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) + switch (srr + 1) { + case 5: smr_val |= SCSMR_SRC_5; break; + case 7: smr_val |= SCSMR_SRC_7; break; + case 11: smr_val |= SCSMR_SRC_11; break; + case 13: smr_val |= SCSMR_SRC_13; break; + case 16: smr_val |= SCSMR_SRC_16; break; + case 17: smr_val |= SCSMR_SRC_17; break; + case 19: smr_val |= SCSMR_SRC_19; break; + case 27: smr_val |= SCSMR_SRC_27; break; + } + smr_val |= cks; + serial_port_out(port, SCSCR, scr_val | s->hscif_tot); + serial_port_out(port, SCSMR, smr_val); + serial_port_out(port, SCBRR, brr); + if (sci_getreg(port, HSSRR)->size) { + unsigned int hssrr = srr | HSCIF_SRE; + /* Calculate deviation from intended rate at the + * center of the last stop bit in sampling clocks. + */ + int last_stop = bits * 2 - 1; + int deviation = DIV_ROUND_CLOSEST(min_err * last_stop * + (int)(srr + 1), + 2 * (int)baud); + + if (abs(deviation) >= 2) { + /* At least two sampling clocks off at the + * last stop bit; we can increase the error + * margin by shifting the sampling point. + */ + int shift = clamp(deviation / 2, -8, 7); + + hssrr |= (shift << HSCIF_SRHP_SHIFT) & + HSCIF_SRHP_MASK; + hssrr |= HSCIF_SRDE; + } + serial_port_out(port, HSSRR, hssrr); + } + + /* Wait one bit interval */ + udelay((1000000 + (baud - 1)) / baud); + } else { + /* Don't touch the bit rate configuration */ + scr_val = s->cfg->scscr & (SCSCR_CKE1 | SCSCR_CKE0); + smr_val |= serial_port_in(port, SCSMR) & + (SCSMR_CKEDG | SCSMR_SRC_MASK | SCSMR_CKS); + serial_port_out(port, SCSCR, scr_val | s->hscif_tot); + serial_port_out(port, SCSMR, smr_val); + } + + sci_init_pins(port, termios->c_cflag); + + port->status &= ~UPSTAT_AUTOCTS; + s->autorts = false; + reg = sci_getreg(port, SCFCR); + if (reg->size) { + unsigned short ctrl = serial_port_in(port, SCFCR); + + if ((port->flags & UPF_HARD_FLOW) && + (termios->c_cflag & CRTSCTS)) { + /* There is no CTS interrupt to restart the hardware */ + port->status |= UPSTAT_AUTOCTS; + /* MCE is enabled when RTS is raised */ + s->autorts = true; + } + + /* + * As we've done a sci_reset() above, ensure we don't + * interfere with the FIFOs while toggling MCE. As the + * reset values could still be set, simply mask them out. + */ + ctrl &= ~(SCFCR_RFRST | SCFCR_TFRST); + + serial_port_out(port, SCFCR, ctrl); + } + if (port->flags & UPF_HARD_FLOW) { + /* Refresh (Auto) RTS */ + sci_set_mctrl(port, port->mctrl); + } + + scr_val |= SCSCR_RE | SCSCR_TE | + (s->cfg->scscr & ~(SCSCR_CKE1 | SCSCR_CKE0)); + serial_port_out(port, SCSCR, scr_val | s->hscif_tot); + if ((srr + 1 == 5) && + (port->type == PORT_SCIFA || port->type == PORT_SCIFB)) { + /* + * In asynchronous mode, when the sampling rate is 1/5, first + * received data may become invalid on some SCIFA and SCIFB. + * To avoid this problem wait more than 1 serial data time (1 + * bit time x serial data number) after setting SCSCR.RE = 1. + */ + udelay(DIV_ROUND_UP(10 * 1000000, baud)); + } + + /* + * Calculate delay for 2 DMA buffers (4 FIFO). + * See serial_core.c::uart_update_timeout(). + * With 10 bits (CS8), 250Hz, 115200 baud and 64 bytes FIFO, the above + * function calculates 1 jiffie for the data plus 5 jiffies for the + * "slop(e)." Then below we calculate 5 jiffies (20ms) for 2 DMA + * buffers (4 FIFO sizes), but when performing a faster transfer, the + * value obtained by this formula is too small. Therefore, if the value + * is smaller than 20ms, use 20ms as the timeout value for DMA. + */ + s->rx_frame = (10000 * bits) / (baud / 100); +#ifdef CONFIG_SERIAL_SH_SCI_DMA + s->rx_timeout = s->buf_len_rx * 2 * s->rx_frame; + if (s->rx_timeout < 20) + s->rx_timeout = 20; +#endif + + if ((termios->c_cflag & CREAD) != 0) + sci_start_rx(port); + + spin_unlock_irqrestore(&port->lock, flags); + + sci_port_disable(s); + + if (UART_ENABLE_MS(port, termios->c_cflag)) + sci_enable_ms(port); +} + +static void sci_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct sci_port *sci_port = to_sci_port(port); + + switch (state) { + case UART_PM_STATE_OFF: + sci_port_disable(sci_port); + break; + default: + sci_port_enable(sci_port); + break; + } +} + +static const char *sci_type(struct uart_port *port) +{ + switch (port->type) { + case PORT_IRDA: + return "irda"; + case PORT_SCI: + return "sci"; + case PORT_SCIF: + return "scif"; + case PORT_SCIFA: + return "scifa"; + case PORT_SCIFB: + return "scifb"; + case PORT_HSCIF: + return "hscif"; + } + + return NULL; +} + +static int sci_remap_port(struct uart_port *port) +{ + struct sci_port *sport = to_sci_port(port); + + /* + * Nothing to do if there's already an established membase. + */ + if (port->membase) + return 0; + + if (port->dev->of_node || (port->flags & UPF_IOREMAP)) { + port->membase = ioremap(port->mapbase, sport->reg_size); + if (unlikely(!port->membase)) { + dev_err(port->dev, "can't remap port#%d\n", port->line); + return -ENXIO; + } + } else { + /* + * For the simple (and majority of) cases where we don't + * need to do any remapping, just cast the cookie + * directly. + */ + port->membase = (void __iomem *)(uintptr_t)port->mapbase; + } + + return 0; +} + +static void sci_release_port(struct uart_port *port) +{ + struct sci_port *sport = to_sci_port(port); + + if (port->dev->of_node || (port->flags & UPF_IOREMAP)) { + iounmap(port->membase); + port->membase = NULL; + } + + release_mem_region(port->mapbase, sport->reg_size); +} + +static int sci_request_port(struct uart_port *port) +{ + struct resource *res; + struct sci_port *sport = to_sci_port(port); + int ret; + + res = request_mem_region(port->mapbase, sport->reg_size, + dev_name(port->dev)); + if (unlikely(res == NULL)) { + dev_err(port->dev, "request_mem_region failed."); + return -EBUSY; + } + + ret = sci_remap_port(port); + if (unlikely(ret != 0)) { + release_resource(res); + return ret; + } + + return 0; +} + +static void sci_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + struct sci_port *sport = to_sci_port(port); + + port->type = sport->cfg->type; + sci_request_port(port); + } +} + +static int sci_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + if (ser->baud_base < 2400) + /* No paper tape reader for Mitch.. */ + return -EINVAL; + + return 0; +} + +static const struct uart_ops sci_uart_ops = { + .tx_empty = sci_tx_empty, + .set_mctrl = sci_set_mctrl, + .get_mctrl = sci_get_mctrl, + .start_tx = sci_start_tx, + .stop_tx = sci_stop_tx, + .stop_rx = sci_stop_rx, + .enable_ms = sci_enable_ms, + .break_ctl = sci_break_ctl, + .startup = sci_startup, + .shutdown = sci_shutdown, + .flush_buffer = sci_flush_buffer, + .set_termios = sci_set_termios, + .pm = sci_pm, + .type = sci_type, + .release_port = sci_release_port, + .request_port = sci_request_port, + .config_port = sci_config_port, + .verify_port = sci_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = sci_poll_get_char, + .poll_put_char = sci_poll_put_char, +#endif +}; + +static int sci_init_clocks(struct sci_port *sci_port, struct device *dev) +{ + const char *clk_names[] = { + [SCI_FCK] = "fck", + [SCI_SCK] = "sck", + [SCI_BRG_INT] = "brg_int", + [SCI_SCIF_CLK] = "scif_clk", + }; + struct clk *clk; + unsigned int i; + + if (sci_port->cfg->type == PORT_HSCIF) + clk_names[SCI_SCK] = "hsck"; + + for (i = 0; i < SCI_NUM_CLKS; i++) { + clk = devm_clk_get(dev, clk_names[i]); + if (PTR_ERR(clk) == -EPROBE_DEFER) + return -EPROBE_DEFER; + + if (IS_ERR(clk) && i == SCI_FCK) { + /* + * "fck" used to be called "sci_ick", and we need to + * maintain DT backward compatibility. + */ + clk = devm_clk_get(dev, "sci_ick"); + if (PTR_ERR(clk) == -EPROBE_DEFER) + return -EPROBE_DEFER; + + if (!IS_ERR(clk)) + goto found; + + /* + * Not all SH platforms declare a clock lookup entry + * for SCI devices, in which case we need to get the + * global "peripheral_clk" clock. + */ + clk = devm_clk_get(dev, "peripheral_clk"); + if (!IS_ERR(clk)) + goto found; + + dev_err(dev, "failed to get %s (%ld)\n", clk_names[i], + PTR_ERR(clk)); + return PTR_ERR(clk); + } + +found: + if (IS_ERR(clk)) + dev_dbg(dev, "failed to get %s (%ld)\n", clk_names[i], + PTR_ERR(clk)); + else + dev_dbg(dev, "clk %s is %pC rate %lu\n", clk_names[i], + clk, clk_get_rate(clk)); + sci_port->clks[i] = IS_ERR(clk) ? NULL : clk; + } + return 0; +} + +static const struct sci_port_params * +sci_probe_regmap(const struct plat_sci_port *cfg) +{ + unsigned int regtype; + + if (cfg->regtype != SCIx_PROBE_REGTYPE) + return &sci_port_params[cfg->regtype]; + + switch (cfg->type) { + case PORT_SCI: + regtype = SCIx_SCI_REGTYPE; + break; + case PORT_IRDA: + regtype = SCIx_IRDA_REGTYPE; + break; + case PORT_SCIFA: + regtype = SCIx_SCIFA_REGTYPE; + break; + case PORT_SCIFB: + regtype = SCIx_SCIFB_REGTYPE; + break; + case PORT_SCIF: + /* + * The SH-4 is a bit of a misnomer here, although that's + * where this particular port layout originated. This + * configuration (or some slight variation thereof) + * remains the dominant model for all SCIFs. + */ + regtype = SCIx_SH4_SCIF_REGTYPE; + break; + case PORT_HSCIF: + regtype = SCIx_HSCIF_REGTYPE; + break; + default: + pr_err("Can't probe register map for given port\n"); + return NULL; + } + + return &sci_port_params[regtype]; +} + +static int sci_init_single(struct platform_device *dev, + struct sci_port *sci_port, unsigned int index, + const struct plat_sci_port *p, bool early) +{ + struct uart_port *port = &sci_port->port; + const struct resource *res; + unsigned int i; + int ret; + + sci_port->cfg = p; + + port->ops = &sci_uart_ops; + port->iotype = UPIO_MEM; + port->line = index; + port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_SH_SCI_CONSOLE); + + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (res == NULL) + return -ENOMEM; + + port->mapbase = res->start; + sci_port->reg_size = resource_size(res); + + for (i = 0; i < ARRAY_SIZE(sci_port->irqs); ++i) { + if (i) + sci_port->irqs[i] = platform_get_irq_optional(dev, i); + else + sci_port->irqs[i] = platform_get_irq(dev, i); + } + + /* + * The fourth interrupt on SCI port is transmit end interrupt, so + * shuffle the interrupts. + */ + if (p->type == PORT_SCI) + swap(sci_port->irqs[SCIx_BRI_IRQ], sci_port->irqs[SCIx_TEI_IRQ]); + + /* The SCI generates several interrupts. They can be muxed together or + * connected to different interrupt lines. In the muxed case only one + * interrupt resource is specified as there is only one interrupt ID. + * In the non-muxed case, up to 6 interrupt signals might be generated + * from the SCI, however those signals might have their own individual + * interrupt ID numbers, or muxed together with another interrupt. + */ + if (sci_port->irqs[0] < 0) + return -ENXIO; + + if (sci_port->irqs[1] < 0) + for (i = 1; i < ARRAY_SIZE(sci_port->irqs); i++) + sci_port->irqs[i] = sci_port->irqs[0]; + + sci_port->params = sci_probe_regmap(p); + if (unlikely(sci_port->params == NULL)) + return -EINVAL; + + switch (p->type) { + case PORT_SCIFB: + sci_port->rx_trigger = 48; + break; + case PORT_HSCIF: + sci_port->rx_trigger = 64; + break; + case PORT_SCIFA: + sci_port->rx_trigger = 32; + break; + case PORT_SCIF: + if (p->regtype == SCIx_SH7705_SCIF_REGTYPE) + /* RX triggering not implemented for this IP */ + sci_port->rx_trigger = 1; + else + sci_port->rx_trigger = 8; + break; + default: + sci_port->rx_trigger = 1; + break; + } + + sci_port->rx_fifo_timeout = 0; + sci_port->hscif_tot = 0; + + /* SCIFA on sh7723 and sh7724 need a custom sampling rate that doesn't + * match the SoC datasheet, this should be investigated. Let platform + * data override the sampling rate for now. + */ + sci_port->sampling_rate_mask = p->sampling_rate + ? SCI_SR(p->sampling_rate) + : sci_port->params->sampling_rate_mask; + + if (!early) { + ret = sci_init_clocks(sci_port, &dev->dev); + if (ret < 0) + return ret; + + port->dev = &dev->dev; + + pm_runtime_enable(&dev->dev); + } + + port->type = p->type; + port->flags = UPF_FIXED_PORT | UPF_BOOT_AUTOCONF | p->flags; + port->fifosize = sci_port->params->fifosize; + + if (port->type == PORT_SCI && !dev->dev.of_node) { + if (sci_port->reg_size >= 0x20) + port->regshift = 2; + else + port->regshift = 1; + } + + /* + * The UART port needs an IRQ value, so we peg this to the RX IRQ + * for the multi-IRQ ports, which is where we are primarily + * concerned with the shutdown path synchronization. + * + * For the muxed case there's nothing more to do. + */ + port->irq = sci_port->irqs[SCIx_RXI_IRQ]; + port->irqflags = 0; + + port->serial_in = sci_serial_in; + port->serial_out = sci_serial_out; + + return 0; +} + +static void sci_cleanup_single(struct sci_port *port) +{ + pm_runtime_disable(port->port.dev); +} + +#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) || \ + defined(CONFIG_SERIAL_SH_SCI_EARLYCON) +static void serial_console_putchar(struct uart_port *port, int ch) +{ + sci_poll_put_char(port, ch); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + */ +static void serial_console_write(struct console *co, const char *s, + unsigned count) +{ + struct sci_port *sci_port = &sci_ports[co->index]; + struct uart_port *port = &sci_port->port; + unsigned short bits, ctrl, ctrl_temp; + unsigned long flags; + int locked = 1; + + if (port->sysrq) + locked = 0; + else if (oops_in_progress) + locked = spin_trylock_irqsave(&port->lock, flags); + else + spin_lock_irqsave(&port->lock, flags); + + /* first save SCSCR then disable interrupts, keep clock source */ + ctrl = serial_port_in(port, SCSCR); + ctrl_temp = SCSCR_RE | SCSCR_TE | + (sci_port->cfg->scscr & ~(SCSCR_CKE1 | SCSCR_CKE0)) | + (ctrl & (SCSCR_CKE1 | SCSCR_CKE0)); + serial_port_out(port, SCSCR, ctrl_temp | sci_port->hscif_tot); + + uart_console_write(port, s, count, serial_console_putchar); + + /* wait until fifo is empty and last bit has been transmitted */ + bits = SCxSR_TDxE(port) | SCxSR_TEND(port); + while ((serial_port_in(port, SCxSR) & bits) != bits) + cpu_relax(); + + /* restore the SCSCR */ + serial_port_out(port, SCSCR, ctrl); + + if (locked) + spin_unlock_irqrestore(&port->lock, flags); +} + +static int serial_console_setup(struct console *co, char *options) +{ + struct sci_port *sci_port; + struct uart_port *port; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + int ret; + + /* + * Refuse to handle any bogus ports. + */ + if (co->index < 0 || co->index >= SCI_NPORTS) + return -ENODEV; + + sci_port = &sci_ports[co->index]; + port = &sci_port->port; + + /* + * Refuse to handle uninitialized ports. + */ + if (!port->ops) + return -ENODEV; + + ret = sci_remap_port(port); + if (unlikely(ret != 0)) + return ret; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct console serial_console = { + .name = "ttySC", + .device = uart_console_device, + .write = serial_console_write, + .setup = serial_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &sci_uart_driver, +}; + +#ifdef CONFIG_SUPERH +static struct console early_serial_console = { + .name = "early_ttySC", + .write = serial_console_write, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + +static char early_serial_buf[32]; + +static int sci_probe_earlyprintk(struct platform_device *pdev) +{ + const struct plat_sci_port *cfg = dev_get_platdata(&pdev->dev); + + if (early_serial_console.data) + return -EEXIST; + + early_serial_console.index = pdev->id; + + sci_init_single(pdev, &sci_ports[pdev->id], pdev->id, cfg, true); + + serial_console_setup(&early_serial_console, early_serial_buf); + + if (!strstr(early_serial_buf, "keep")) + early_serial_console.flags |= CON_BOOT; + + register_console(&early_serial_console); + return 0; +} +#endif + +#define SCI_CONSOLE (&serial_console) + +#else +static inline int sci_probe_earlyprintk(struct platform_device *pdev) +{ + return -EINVAL; +} + +#define SCI_CONSOLE NULL + +#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE || CONFIG_SERIAL_SH_SCI_EARLYCON */ + +static const char banner[] __initconst = "SuperH (H)SCI(F) driver initialized"; + +static DEFINE_MUTEX(sci_uart_registration_lock); +static struct uart_driver sci_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "sci", + .dev_name = "ttySC", + .major = SCI_MAJOR, + .minor = SCI_MINOR_START, + .nr = SCI_NPORTS, + .cons = SCI_CONSOLE, +}; + +static int sci_remove(struct platform_device *dev) +{ + struct sci_port *port = platform_get_drvdata(dev); + unsigned int type = port->port.type; /* uart_remove_... clears it */ + + sci_ports_in_use &= ~BIT(port->port.line); + uart_remove_one_port(&sci_uart_driver, &port->port); + + sci_cleanup_single(port); + + if (port->port.fifosize > 1) + device_remove_file(&dev->dev, &dev_attr_rx_fifo_trigger); + if (type == PORT_SCIFA || type == PORT_SCIFB || type == PORT_HSCIF) + device_remove_file(&dev->dev, &dev_attr_rx_fifo_timeout); + + return 0; +} + + +#define SCI_OF_DATA(type, regtype) (void *)((type) << 16 | (regtype)) +#define SCI_OF_TYPE(data) ((unsigned long)(data) >> 16) +#define SCI_OF_REGTYPE(data) ((unsigned long)(data) & 0xffff) + +static const struct of_device_id of_sci_match[] = { + /* SoC-specific types */ + { + .compatible = "renesas,scif-r7s72100", + .data = SCI_OF_DATA(PORT_SCIF, SCIx_SH2_SCIF_FIFODATA_REGTYPE), + }, + { + .compatible = "renesas,scif-r7s9210", + .data = SCI_OF_DATA(PORT_SCIF, SCIx_RZ_SCIFA_REGTYPE), + }, + /* Family-specific types */ + { + .compatible = "renesas,rcar-gen1-scif", + .data = SCI_OF_DATA(PORT_SCIF, SCIx_SH4_SCIF_BRG_REGTYPE), + }, { + .compatible = "renesas,rcar-gen2-scif", + .data = SCI_OF_DATA(PORT_SCIF, SCIx_SH4_SCIF_BRG_REGTYPE), + }, { + .compatible = "renesas,rcar-gen3-scif", + .data = SCI_OF_DATA(PORT_SCIF, SCIx_SH4_SCIF_BRG_REGTYPE), + }, + /* Generic types */ + { + .compatible = "renesas,scif", + .data = SCI_OF_DATA(PORT_SCIF, SCIx_SH4_SCIF_REGTYPE), + }, { + .compatible = "renesas,scifa", + .data = SCI_OF_DATA(PORT_SCIFA, SCIx_SCIFA_REGTYPE), + }, { + .compatible = "renesas,scifb", + .data = SCI_OF_DATA(PORT_SCIFB, SCIx_SCIFB_REGTYPE), + }, { + .compatible = "renesas,hscif", + .data = SCI_OF_DATA(PORT_HSCIF, SCIx_HSCIF_REGTYPE), + }, { + .compatible = "renesas,sci", + .data = SCI_OF_DATA(PORT_SCI, SCIx_SCI_REGTYPE), + }, { + /* Terminator */ + }, +}; +MODULE_DEVICE_TABLE(of, of_sci_match); + +static struct plat_sci_port *sci_parse_dt(struct platform_device *pdev, + unsigned int *dev_id) +{ + struct device_node *np = pdev->dev.of_node; + struct plat_sci_port *p; + struct sci_port *sp; + const void *data; + int id; + + if (!IS_ENABLED(CONFIG_OF) || !np) + return NULL; + + data = of_device_get_match_data(&pdev->dev); + + p = devm_kzalloc(&pdev->dev, sizeof(struct plat_sci_port), GFP_KERNEL); + if (!p) + return NULL; + + /* Get the line number from the aliases node. */ + id = of_alias_get_id(np, "serial"); + if (id < 0 && ~sci_ports_in_use) + id = ffz(sci_ports_in_use); + if (id < 0) { + dev_err(&pdev->dev, "failed to get alias id (%d)\n", id); + return NULL; + } + if (id >= ARRAY_SIZE(sci_ports)) { + dev_err(&pdev->dev, "serial%d out of range\n", id); + return NULL; + } + + sp = &sci_ports[id]; + *dev_id = id; + + p->type = SCI_OF_TYPE(data); + p->regtype = SCI_OF_REGTYPE(data); + + sp->has_rtscts = of_property_read_bool(np, "uart-has-rtscts"); + + return p; +} + +static int sci_probe_single(struct platform_device *dev, + unsigned int index, + struct plat_sci_port *p, + struct sci_port *sciport) +{ + int ret; + + /* Sanity check */ + if (unlikely(index >= SCI_NPORTS)) { + dev_notice(&dev->dev, "Attempting to register port %d when only %d are available\n", + index+1, SCI_NPORTS); + dev_notice(&dev->dev, "Consider bumping CONFIG_SERIAL_SH_SCI_NR_UARTS!\n"); + return -EINVAL; + } + BUILD_BUG_ON(SCI_NPORTS > sizeof(sci_ports_in_use) * 8); + if (sci_ports_in_use & BIT(index)) + return -EBUSY; + + mutex_lock(&sci_uart_registration_lock); + if (!sci_uart_driver.state) { + ret = uart_register_driver(&sci_uart_driver); + if (ret) { + mutex_unlock(&sci_uart_registration_lock); + return ret; + } + } + mutex_unlock(&sci_uart_registration_lock); + + ret = sci_init_single(dev, sciport, index, p, false); + if (ret) + return ret; + + sciport->gpios = mctrl_gpio_init(&sciport->port, 0); + if (IS_ERR(sciport->gpios)) + return PTR_ERR(sciport->gpios); + + if (sciport->has_rtscts) { + if (mctrl_gpio_to_gpiod(sciport->gpios, UART_GPIO_CTS) || + mctrl_gpio_to_gpiod(sciport->gpios, UART_GPIO_RTS)) { + dev_err(&dev->dev, "Conflicting RTS/CTS config\n"); + return -EINVAL; + } + sciport->port.flags |= UPF_HARD_FLOW; + } + + ret = uart_add_one_port(&sci_uart_driver, &sciport->port); + if (ret) { + sci_cleanup_single(sciport); + return ret; + } + + return 0; +} + +static int sci_probe(struct platform_device *dev) +{ + struct plat_sci_port *p; + struct sci_port *sp; + unsigned int dev_id; + int ret; + + /* + * If we've come here via earlyprintk initialization, head off to + * the special early probe. We don't have sufficient device state + * to make it beyond this yet. + */ +#ifdef CONFIG_SUPERH + if (is_sh_early_platform_device(dev)) + return sci_probe_earlyprintk(dev); +#endif + + if (dev->dev.of_node) { + p = sci_parse_dt(dev, &dev_id); + if (p == NULL) + return -EINVAL; + } else { + p = dev->dev.platform_data; + if (p == NULL) { + dev_err(&dev->dev, "no platform data supplied\n"); + return -EINVAL; + } + + dev_id = dev->id; + } + + sp = &sci_ports[dev_id]; + platform_set_drvdata(dev, sp); + + ret = sci_probe_single(dev, dev_id, p, sp); + if (ret) + return ret; + + if (sp->port.fifosize > 1) { + ret = device_create_file(&dev->dev, &dev_attr_rx_fifo_trigger); + if (ret) + return ret; + } + if (sp->port.type == PORT_SCIFA || sp->port.type == PORT_SCIFB || + sp->port.type == PORT_HSCIF) { + ret = device_create_file(&dev->dev, &dev_attr_rx_fifo_timeout); + if (ret) { + if (sp->port.fifosize > 1) { + device_remove_file(&dev->dev, + &dev_attr_rx_fifo_trigger); + } + return ret; + } + } + +#ifdef CONFIG_SH_STANDARD_BIOS + sh_bios_gdb_detach(); +#endif + + sci_ports_in_use |= BIT(dev_id); + return 0; +} + +static __maybe_unused int sci_suspend(struct device *dev) +{ + struct sci_port *sport = dev_get_drvdata(dev); + + if (sport) + uart_suspend_port(&sci_uart_driver, &sport->port); + + return 0; +} + +static __maybe_unused int sci_resume(struct device *dev) +{ + struct sci_port *sport = dev_get_drvdata(dev); + + if (sport) + uart_resume_port(&sci_uart_driver, &sport->port); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(sci_dev_pm_ops, sci_suspend, sci_resume); + +static struct platform_driver sci_driver = { + .probe = sci_probe, + .remove = sci_remove, + .driver = { + .name = "sh-sci", + .pm = &sci_dev_pm_ops, + .of_match_table = of_match_ptr(of_sci_match), + }, +}; + +static int __init sci_init(void) +{ + pr_info("%s\n", banner); + + return platform_driver_register(&sci_driver); +} + +static void __exit sci_exit(void) +{ + platform_driver_unregister(&sci_driver); + + if (sci_uart_driver.state) + uart_unregister_driver(&sci_uart_driver); +} + +#if defined(CONFIG_SUPERH) && defined(CONFIG_SERIAL_SH_SCI_CONSOLE) +sh_early_platform_init_buffer("earlyprintk", &sci_driver, + early_serial_buf, ARRAY_SIZE(early_serial_buf)); +#endif +#ifdef CONFIG_SERIAL_SH_SCI_EARLYCON +static struct plat_sci_port port_cfg __initdata; + +static int __init early_console_setup(struct earlycon_device *device, + int type) +{ + if (!device->port.membase) + return -ENODEV; + + device->port.serial_in = sci_serial_in; + device->port.serial_out = sci_serial_out; + device->port.type = type; + memcpy(&sci_ports[0].port, &device->port, sizeof(struct uart_port)); + port_cfg.type = type; + sci_ports[0].cfg = &port_cfg; + sci_ports[0].params = sci_probe_regmap(&port_cfg); + port_cfg.scscr = sci_serial_in(&sci_ports[0].port, SCSCR); + sci_serial_out(&sci_ports[0].port, SCSCR, + SCSCR_RE | SCSCR_TE | port_cfg.scscr); + + device->con->write = serial_console_write; + return 0; +} +static int __init sci_early_console_setup(struct earlycon_device *device, + const char *opt) +{ + return early_console_setup(device, PORT_SCI); +} +static int __init scif_early_console_setup(struct earlycon_device *device, + const char *opt) +{ + return early_console_setup(device, PORT_SCIF); +} +static int __init rzscifa_early_console_setup(struct earlycon_device *device, + const char *opt) +{ + port_cfg.regtype = SCIx_RZ_SCIFA_REGTYPE; + return early_console_setup(device, PORT_SCIF); +} +static int __init scifa_early_console_setup(struct earlycon_device *device, + const char *opt) +{ + return early_console_setup(device, PORT_SCIFA); +} +static int __init scifb_early_console_setup(struct earlycon_device *device, + const char *opt) +{ + return early_console_setup(device, PORT_SCIFB); +} +static int __init hscif_early_console_setup(struct earlycon_device *device, + const char *opt) +{ + return early_console_setup(device, PORT_HSCIF); +} + +OF_EARLYCON_DECLARE(sci, "renesas,sci", sci_early_console_setup); +OF_EARLYCON_DECLARE(scif, "renesas,scif", scif_early_console_setup); +OF_EARLYCON_DECLARE(scif, "renesas,scif-r7s9210", rzscifa_early_console_setup); +OF_EARLYCON_DECLARE(scifa, "renesas,scifa", scifa_early_console_setup); +OF_EARLYCON_DECLARE(scifb, "renesas,scifb", scifb_early_console_setup); +OF_EARLYCON_DECLARE(hscif, "renesas,hscif", hscif_early_console_setup); +#endif /* CONFIG_SERIAL_SH_SCI_EARLYCON */ + +module_init(sci_init); +module_exit(sci_exit); + +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:sh-sci"); +MODULE_AUTHOR("Paul Mundt"); +MODULE_DESCRIPTION("SuperH (H)SCI(F) serial driver"); diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h new file mode 100644 index 000000000..c0dfe4382 --- /dev/null +++ b/drivers/tty/serial/sh-sci.h @@ -0,0 +1,176 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#include +#include +#include + +#define SCI_MAJOR 204 +#define SCI_MINOR_START 8 + + +/* + * SCI register subset common for all port types. + * Not all registers will exist on all parts. + */ +enum { + SCSMR, /* Serial Mode Register */ + SCBRR, /* Bit Rate Register */ + SCSCR, /* Serial Control Register */ + SCxSR, /* Serial Status Register */ + SCFCR, /* FIFO Control Register */ + SCFDR, /* FIFO Data Count Register */ + SCxTDR, /* Transmit (FIFO) Data Register */ + SCxRDR, /* Receive (FIFO) Data Register */ + SCLSR, /* Line Status Register */ + SCTFDR, /* Transmit FIFO Data Count Register */ + SCRFDR, /* Receive FIFO Data Count Register */ + SCSPTR, /* Serial Port Register */ + HSSRR, /* Sampling Rate Register */ + SCPCR, /* Serial Port Control Register */ + SCPDR, /* Serial Port Data Register */ + SCDL, /* BRG Frequency Division Register */ + SCCKS, /* BRG Clock Select Register */ + HSRTRGR, /* Rx FIFO Data Count Trigger Register */ + HSTTRGR, /* Tx FIFO Data Count Trigger Register */ + + SCIx_NR_REGS, +}; + + +/* SCSMR (Serial Mode Register) */ +#define SCSMR_C_A BIT(7) /* Communication Mode */ +#define SCSMR_CSYNC BIT(7) /* - Clocked synchronous mode */ +#define SCSMR_ASYNC 0 /* - Asynchronous mode */ +#define SCSMR_CHR BIT(6) /* 7-bit Character Length */ +#define SCSMR_PE BIT(5) /* Parity Enable */ +#define SCSMR_ODD BIT(4) /* Odd Parity */ +#define SCSMR_STOP BIT(3) /* Stop Bit Length */ +#define SCSMR_CKS 0x0003 /* Clock Select */ + +/* Serial Mode Register, SCIFA/SCIFB only bits */ +#define SCSMR_CKEDG BIT(12) /* Transmit/Receive Clock Edge Select */ +#define SCSMR_SRC_MASK 0x0700 /* Sampling Control */ +#define SCSMR_SRC_16 0x0000 /* Sampling rate 1/16 */ +#define SCSMR_SRC_5 0x0100 /* Sampling rate 1/5 */ +#define SCSMR_SRC_7 0x0200 /* Sampling rate 1/7 */ +#define SCSMR_SRC_11 0x0300 /* Sampling rate 1/11 */ +#define SCSMR_SRC_13 0x0400 /* Sampling rate 1/13 */ +#define SCSMR_SRC_17 0x0500 /* Sampling rate 1/17 */ +#define SCSMR_SRC_19 0x0600 /* Sampling rate 1/19 */ +#define SCSMR_SRC_27 0x0700 /* Sampling rate 1/27 */ + +/* Serial Control Register, SCIFA/SCIFB only bits */ +#define SCSCR_TDRQE BIT(15) /* Tx Data Transfer Request Enable */ +#define SCSCR_RDRQE BIT(14) /* Rx Data Transfer Request Enable */ + +/* Serial Control Register, HSCIF-only bits */ +#define HSSCR_TOT_SHIFT 14 + +/* SCxSR (Serial Status Register) on SCI */ +#define SCI_TDRE BIT(7) /* Transmit Data Register Empty */ +#define SCI_RDRF BIT(6) /* Receive Data Register Full */ +#define SCI_ORER BIT(5) /* Overrun Error */ +#define SCI_FER BIT(4) /* Framing Error */ +#define SCI_PER BIT(3) /* Parity Error */ +#define SCI_TEND BIT(2) /* Transmit End */ +#define SCI_RESERVED 0x03 /* All reserved bits */ + +#define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER) + +#define SCI_RDxF_CLEAR (u32)(~(SCI_RESERVED | SCI_RDRF)) +#define SCI_ERROR_CLEAR (u32)(~(SCI_RESERVED | SCI_PER | SCI_FER | SCI_ORER)) +#define SCI_TDxE_CLEAR (u32)(~(SCI_RESERVED | SCI_TEND | SCI_TDRE)) +#define SCI_BREAK_CLEAR (u32)(~(SCI_RESERVED | SCI_PER | SCI_FER | SCI_ORER)) + +/* SCxSR (Serial Status Register) on SCIF, SCIFA, SCIFB, HSCIF */ +#define SCIF_ER BIT(7) /* Receive Error */ +#define SCIF_TEND BIT(6) /* Transmission End */ +#define SCIF_TDFE BIT(5) /* Transmit FIFO Data Empty */ +#define SCIF_BRK BIT(4) /* Break Detect */ +#define SCIF_FER BIT(3) /* Framing Error */ +#define SCIF_PER BIT(2) /* Parity Error */ +#define SCIF_RDF BIT(1) /* Receive FIFO Data Full */ +#define SCIF_DR BIT(0) /* Receive Data Ready */ +/* SCIF only (optional) */ +#define SCIF_PERC 0xf000 /* Number of Parity Errors */ +#define SCIF_FERC 0x0f00 /* Number of Framing Errors */ +/*SCIFA/SCIFB and SCIF on SH7705/SH7720/SH7721 only */ +#define SCIFA_ORER BIT(9) /* Overrun Error */ + +#define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_BRK | SCIF_ER) + +#define SCIF_RDxF_CLEAR (u32)(~(SCIF_DR | SCIF_RDF)) +#define SCIF_ERROR_CLEAR (u32)(~(SCIF_PER | SCIF_FER | SCIF_ER)) +#define SCIF_TDxE_CLEAR (u32)(~(SCIF_TDFE)) +#define SCIF_BREAK_CLEAR (u32)(~(SCIF_PER | SCIF_FER | SCIF_BRK)) + +/* SCFCR (FIFO Control Register) */ +#define SCFCR_RTRG1 BIT(7) /* Receive FIFO Data Count Trigger */ +#define SCFCR_RTRG0 BIT(6) +#define SCFCR_TTRG1 BIT(5) /* Transmit FIFO Data Count Trigger */ +#define SCFCR_TTRG0 BIT(4) +#define SCFCR_MCE BIT(3) /* Modem Control Enable */ +#define SCFCR_TFRST BIT(2) /* Transmit FIFO Data Register Reset */ +#define SCFCR_RFRST BIT(1) /* Receive FIFO Data Register Reset */ +#define SCFCR_LOOP BIT(0) /* Loopback Test */ + +/* SCLSR (Line Status Register) on (H)SCIF */ +#define SCLSR_TO BIT(2) /* Timeout */ +#define SCLSR_ORER BIT(0) /* Overrun Error */ + +/* SCSPTR (Serial Port Register), optional */ +#define SCSPTR_RTSIO BIT(7) /* Serial Port RTS# Pin Input/Output */ +#define SCSPTR_RTSDT BIT(6) /* Serial Port RTS# Pin Data */ +#define SCSPTR_CTSIO BIT(5) /* Serial Port CTS# Pin Input/Output */ +#define SCSPTR_CTSDT BIT(4) /* Serial Port CTS# Pin Data */ +#define SCSPTR_SCKIO BIT(3) /* Serial Port Clock Pin Input/Output */ +#define SCSPTR_SCKDT BIT(2) /* Serial Port Clock Pin Data */ +#define SCSPTR_SPB2IO BIT(1) /* Serial Port Break Input/Output */ +#define SCSPTR_SPB2DT BIT(0) /* Serial Port Break Data */ + +/* HSSRR HSCIF */ +#define HSCIF_SRE BIT(15) /* Sampling Rate Register Enable */ +#define HSCIF_SRDE BIT(14) /* Sampling Point Register Enable */ + +#define HSCIF_SRHP_SHIFT 8 +#define HSCIF_SRHP_MASK 0x0f00 + +/* SCPCR (Serial Port Control Register), SCIFA/SCIFB only */ +#define SCPCR_RTSC BIT(4) /* Serial Port RTS# Pin / Output Pin */ +#define SCPCR_CTSC BIT(3) /* Serial Port CTS# Pin / Input Pin */ +#define SCPCR_SCKC BIT(2) /* Serial Port SCK Pin / Output Pin */ +#define SCPCR_RXDC BIT(1) /* Serial Port RXD Pin / Input Pin */ +#define SCPCR_TXDC BIT(0) /* Serial Port TXD Pin / Output Pin */ + +/* SCPDR (Serial Port Data Register), SCIFA/SCIFB only */ +#define SCPDR_RTSD BIT(4) /* Serial Port RTS# Output Pin Data */ +#define SCPDR_CTSD BIT(3) /* Serial Port CTS# Input Pin Data */ +#define SCPDR_SCKD BIT(2) /* Serial Port SCK Output Pin Data */ +#define SCPDR_RXDD BIT(1) /* Serial Port RXD Input Pin Data */ +#define SCPDR_TXDD BIT(0) /* Serial Port TXD Output Pin Data */ + +/* + * BRG Clock Select Register (Some SCIF and HSCIF) + * The Baud Rate Generator for external clock can provide a clock source for + * the sampling clock. It outputs either its frequency divided clock, or the + * (undivided) (H)SCK external clock. + */ +#define SCCKS_CKS BIT(15) /* Select (H)SCK (1) or divided SC_CLK (0) */ +#define SCCKS_XIN BIT(14) /* SC_CLK uses bus clock (1) or SCIF_CLK (0) */ + +#define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND) +#define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_DR | SCIF_RDF) +#define SCxSR_TDxE(port) (((port)->type == PORT_SCI) ? SCI_TDRE : SCIF_TDFE) +#define SCxSR_FER(port) (((port)->type == PORT_SCI) ? SCI_FER : SCIF_FER) +#define SCxSR_PER(port) (((port)->type == PORT_SCI) ? SCI_PER : SCIF_PER) +#define SCxSR_BRK(port) (((port)->type == PORT_SCI) ? 0x00 : SCIF_BRK) + +#define SCxSR_ERRORS(port) (to_sci_port(port)->params->error_mask) + +#define SCxSR_RDxF_CLEAR(port) \ + (((port)->type == PORT_SCI) ? SCI_RDxF_CLEAR : SCIF_RDxF_CLEAR) +#define SCxSR_ERROR_CLEAR(port) \ + (to_sci_port(port)->params->error_clear) +#define SCxSR_TDxE_CLEAR(port) \ + (((port)->type == PORT_SCI) ? SCI_TDxE_CLEAR : SCIF_TDxE_CLEAR) +#define SCxSR_BREAK_CLEAR(port) \ + (((port)->type == PORT_SCI) ? SCI_BREAK_CLEAR : SCIF_BREAK_CLEAR) diff --git a/drivers/tty/serial/sifive.c b/drivers/tty/serial/sifive.c new file mode 100644 index 000000000..c234114b5 --- /dev/null +++ b/drivers/tty/serial/sifive.c @@ -0,0 +1,1106 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * SiFive UART driver + * Copyright (C) 2018 Paul Walmsley + * Copyright (C) 2018-2019 SiFive + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Based partially on: + * - drivers/tty/serial/pxa.c + * - drivers/tty/serial/amba-pl011.c + * - drivers/tty/serial/uartlite.c + * - drivers/tty/serial/omap-serial.c + * - drivers/pwm/pwm-sifive.c + * + * See the following sources for further documentation: + * - Chapter 19 "Universal Asynchronous Receiver/Transmitter (UART)" of + * SiFive FE310-G000 v2p3 + * - The tree/master/src/main/scala/devices/uart directory of + * https://github.com/sifive/sifive-blocks/ + * + * The SiFive UART design is not 8250-compatible. The following common + * features are not supported: + * - Word lengths other than 8 bits + * - Break handling + * - Parity + * - Flow control + * - Modem signals (DSR, RI, etc.) + * On the other hand, the design is free from the baggage of the 8250 + * programming model. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Register offsets + */ + +/* TXDATA */ +#define SIFIVE_SERIAL_TXDATA_OFFS 0x0 +#define SIFIVE_SERIAL_TXDATA_FULL_SHIFT 31 +#define SIFIVE_SERIAL_TXDATA_FULL_MASK (1 << SIFIVE_SERIAL_TXDATA_FULL_SHIFT) +#define SIFIVE_SERIAL_TXDATA_DATA_SHIFT 0 +#define SIFIVE_SERIAL_TXDATA_DATA_MASK (0xff << SIFIVE_SERIAL_TXDATA_DATA_SHIFT) + +/* RXDATA */ +#define SIFIVE_SERIAL_RXDATA_OFFS 0x4 +#define SIFIVE_SERIAL_RXDATA_EMPTY_SHIFT 31 +#define SIFIVE_SERIAL_RXDATA_EMPTY_MASK (1 << SIFIVE_SERIAL_RXDATA_EMPTY_SHIFT) +#define SIFIVE_SERIAL_RXDATA_DATA_SHIFT 0 +#define SIFIVE_SERIAL_RXDATA_DATA_MASK (0xff << SIFIVE_SERIAL_RXDATA_DATA_SHIFT) + +/* TXCTRL */ +#define SIFIVE_SERIAL_TXCTRL_OFFS 0x8 +#define SIFIVE_SERIAL_TXCTRL_TXCNT_SHIFT 16 +#define SIFIVE_SERIAL_TXCTRL_TXCNT_MASK (0x7 << SIFIVE_SERIAL_TXCTRL_TXCNT_SHIFT) +#define SIFIVE_SERIAL_TXCTRL_NSTOP_SHIFT 1 +#define SIFIVE_SERIAL_TXCTRL_NSTOP_MASK (1 << SIFIVE_SERIAL_TXCTRL_NSTOP_SHIFT) +#define SIFIVE_SERIAL_TXCTRL_TXEN_SHIFT 0 +#define SIFIVE_SERIAL_TXCTRL_TXEN_MASK (1 << SIFIVE_SERIAL_TXCTRL_TXEN_SHIFT) + +/* RXCTRL */ +#define SIFIVE_SERIAL_RXCTRL_OFFS 0xC +#define SIFIVE_SERIAL_RXCTRL_RXCNT_SHIFT 16 +#define SIFIVE_SERIAL_RXCTRL_RXCNT_MASK (0x7 << SIFIVE_SERIAL_TXCTRL_TXCNT_SHIFT) +#define SIFIVE_SERIAL_RXCTRL_RXEN_SHIFT 0 +#define SIFIVE_SERIAL_RXCTRL_RXEN_MASK (1 << SIFIVE_SERIAL_RXCTRL_RXEN_SHIFT) + +/* IE */ +#define SIFIVE_SERIAL_IE_OFFS 0x10 +#define SIFIVE_SERIAL_IE_RXWM_SHIFT 1 +#define SIFIVE_SERIAL_IE_RXWM_MASK (1 << SIFIVE_SERIAL_IE_RXWM_SHIFT) +#define SIFIVE_SERIAL_IE_TXWM_SHIFT 0 +#define SIFIVE_SERIAL_IE_TXWM_MASK (1 << SIFIVE_SERIAL_IE_TXWM_SHIFT) + +/* IP */ +#define SIFIVE_SERIAL_IP_OFFS 0x14 +#define SIFIVE_SERIAL_IP_RXWM_SHIFT 1 +#define SIFIVE_SERIAL_IP_RXWM_MASK (1 << SIFIVE_SERIAL_IP_RXWM_SHIFT) +#define SIFIVE_SERIAL_IP_TXWM_SHIFT 0 +#define SIFIVE_SERIAL_IP_TXWM_MASK (1 << SIFIVE_SERIAL_IP_TXWM_SHIFT) + +/* DIV */ +#define SIFIVE_SERIAL_DIV_OFFS 0x18 +#define SIFIVE_SERIAL_DIV_DIV_SHIFT 0 +#define SIFIVE_SERIAL_DIV_DIV_MASK (0xffff << SIFIVE_SERIAL_IP_DIV_SHIFT) + +/* + * Config macros + */ + +/* + * SIFIVE_SERIAL_MAX_PORTS: maximum number of UARTs on a device that can + * host a serial console + */ +#define SIFIVE_SERIAL_MAX_PORTS 8 + +/* + * SIFIVE_DEFAULT_BAUD_RATE: default baud rate that the driver should + * configure itself to use + */ +#define SIFIVE_DEFAULT_BAUD_RATE 115200 + +/* SIFIVE_SERIAL_NAME: our driver's name that we pass to the operating system */ +#define SIFIVE_SERIAL_NAME "sifive-serial" + +/* SIFIVE_TTY_PREFIX: tty name prefix for SiFive serial ports */ +#define SIFIVE_TTY_PREFIX "ttySIF" + +/* SIFIVE_TX_FIFO_DEPTH: depth of the TX FIFO (in bytes) */ +#define SIFIVE_TX_FIFO_DEPTH 8 + +/* SIFIVE_RX_FIFO_DEPTH: depth of the TX FIFO (in bytes) */ +#define SIFIVE_RX_FIFO_DEPTH 8 + +#if (SIFIVE_TX_FIFO_DEPTH != SIFIVE_RX_FIFO_DEPTH) +#error Driver does not support configurations with different TX, RX FIFO sizes +#endif + +/* + * + */ + +/** + * sifive_serial_port - driver-specific data extension to struct uart_port + * @port: struct uart_port embedded in this struct + * @dev: struct device * + * @ier: shadowed copy of the interrupt enable register + * @clkin_rate: input clock to the UART IP block. + * @baud_rate: UART serial line rate (e.g., 115200 baud) + * @clk_notifier: clock rate change notifier for upstream clock changes + * + * Configuration data specific to this SiFive UART. + */ +struct sifive_serial_port { + struct uart_port port; + struct device *dev; + unsigned char ier; + unsigned long clkin_rate; + unsigned long baud_rate; + struct clk *clk; + struct notifier_block clk_notifier; +}; + +/* + * Structure container-of macros + */ + +#define port_to_sifive_serial_port(p) (container_of((p), \ + struct sifive_serial_port, \ + port)) + +#define notifier_to_sifive_serial_port(nb) (container_of((nb), \ + struct sifive_serial_port, \ + clk_notifier)) + +/* + * Forward declarations + */ +static void sifive_serial_stop_tx(struct uart_port *port); + +/* + * Internal functions + */ + +/** + * __ssp_early_writel() - write to a SiFive serial port register (early) + * @port: pointer to a struct uart_port record + * @offs: register address offset from the IP block base address + * @v: value to write to the register + * + * Given a pointer @port to a struct uart_port record, write the value + * @v to the IP block register address offset @offs. This function is + * intended for early console use. + * + * Context: Intended to be used only by the earlyconsole code. + */ +static void __ssp_early_writel(u32 v, u16 offs, struct uart_port *port) +{ + writel_relaxed(v, port->membase + offs); +} + +/** + * __ssp_early_readl() - read from a SiFive serial port register (early) + * @port: pointer to a struct uart_port record + * @offs: register address offset from the IP block base address + * + * Given a pointer @port to a struct uart_port record, read the + * contents of the IP block register located at offset @offs from the + * IP block base and return it. This function is intended for early + * console use. + * + * Context: Intended to be called only by the earlyconsole code or by + * __ssp_readl() or __ssp_writel() (in this driver) + * + * Returns: the register value read from the UART. + */ +static u32 __ssp_early_readl(struct uart_port *port, u16 offs) +{ + return readl_relaxed(port->membase + offs); +} + +/** + * __ssp_writel() - write to a SiFive serial port register + * @v: value to write to the register + * @offs: register address offset from the IP block base address + * @ssp: pointer to a struct sifive_serial_port record + * + * Write the value @v to the IP block register located at offset @offs from the + * IP block base, given a pointer @ssp to a struct sifive_serial_port record. + * + * Context: Any context. + */ +static void __ssp_writel(u32 v, u16 offs, struct sifive_serial_port *ssp) +{ + __ssp_early_writel(v, offs, &ssp->port); +} + +/** + * __ssp_readl() - read from a SiFive serial port register + * @ssp: pointer to a struct sifive_serial_port record + * @offs: register address offset from the IP block base address + * + * Read the contents of the IP block register located at offset @offs from the + * IP block base, given a pointer @ssp to a struct sifive_serial_port record. + * + * Context: Any context. + * + * Returns: the value of the UART register + */ +static u32 __ssp_readl(struct sifive_serial_port *ssp, u16 offs) +{ + return __ssp_early_readl(&ssp->port, offs); +} + +/** + * sifive_serial_is_txfifo_full() - is the TXFIFO full? + * @ssp: pointer to a struct sifive_serial_port + * + * Read the transmit FIFO "full" bit, returning a non-zero value if the + * TX FIFO is full, or zero if space remains. Intended to be used to prevent + * writes to the TX FIFO when it's full. + * + * Returns: SIFIVE_SERIAL_TXDATA_FULL_MASK (non-zero) if the transmit FIFO + * is full, or 0 if space remains. + */ +static int sifive_serial_is_txfifo_full(struct sifive_serial_port *ssp) +{ + return __ssp_readl(ssp, SIFIVE_SERIAL_TXDATA_OFFS) & + SIFIVE_SERIAL_TXDATA_FULL_MASK; +} + +/** + * __ssp_transmit_char() - enqueue a byte to transmit onto the TX FIFO + * @ssp: pointer to a struct sifive_serial_port + * @ch: character to transmit + * + * Enqueue a byte @ch onto the transmit FIFO, given a pointer @ssp to the + * struct sifive_serial_port * to transmit on. Caller should first check to + * ensure that the TXFIFO has space; see sifive_serial_is_txfifo_full(). + * + * Context: Any context. + */ +static void __ssp_transmit_char(struct sifive_serial_port *ssp, int ch) +{ + __ssp_writel(ch, SIFIVE_SERIAL_TXDATA_OFFS, ssp); +} + +/** + * __ssp_transmit_chars() - enqueue multiple bytes onto the TX FIFO + * @ssp: pointer to a struct sifive_serial_port + * + * Transfer up to a TX FIFO size's worth of characters from the Linux serial + * transmit buffer to the SiFive UART TX FIFO. + * + * Context: Any context. Expects @ssp->port.lock to be held by caller. + */ +static void __ssp_transmit_chars(struct sifive_serial_port *ssp) +{ + struct circ_buf *xmit = &ssp->port.state->xmit; + int count; + + if (ssp->port.x_char) { + __ssp_transmit_char(ssp, ssp->port.x_char); + ssp->port.icount.tx++; + ssp->port.x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(&ssp->port)) { + sifive_serial_stop_tx(&ssp->port); + return; + } + count = SIFIVE_TX_FIFO_DEPTH; + do { + __ssp_transmit_char(ssp, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + ssp->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&ssp->port); + + if (uart_circ_empty(xmit)) + sifive_serial_stop_tx(&ssp->port); +} + +/** + * __ssp_enable_txwm() - enable transmit watermark interrupts + * @ssp: pointer to a struct sifive_serial_port + * + * Enable interrupt generation when the transmit FIFO watermark is reached + * on the SiFive UART referred to by @ssp. + */ +static void __ssp_enable_txwm(struct sifive_serial_port *ssp) +{ + if (ssp->ier & SIFIVE_SERIAL_IE_TXWM_MASK) + return; + + ssp->ier |= SIFIVE_SERIAL_IE_TXWM_MASK; + __ssp_writel(ssp->ier, SIFIVE_SERIAL_IE_OFFS, ssp); +} + +/** + * __ssp_enable_rxwm() - enable receive watermark interrupts + * @ssp: pointer to a struct sifive_serial_port + * + * Enable interrupt generation when the receive FIFO watermark is reached + * on the SiFive UART referred to by @ssp. + */ +static void __ssp_enable_rxwm(struct sifive_serial_port *ssp) +{ + if (ssp->ier & SIFIVE_SERIAL_IE_RXWM_MASK) + return; + + ssp->ier |= SIFIVE_SERIAL_IE_RXWM_MASK; + __ssp_writel(ssp->ier, SIFIVE_SERIAL_IE_OFFS, ssp); +} + +/** + * __ssp_disable_txwm() - disable transmit watermark interrupts + * @ssp: pointer to a struct sifive_serial_port + * + * Disable interrupt generation when the transmit FIFO watermark is reached + * on the UART referred to by @ssp. + */ +static void __ssp_disable_txwm(struct sifive_serial_port *ssp) +{ + if (!(ssp->ier & SIFIVE_SERIAL_IE_TXWM_MASK)) + return; + + ssp->ier &= ~SIFIVE_SERIAL_IE_TXWM_MASK; + __ssp_writel(ssp->ier, SIFIVE_SERIAL_IE_OFFS, ssp); +} + +/** + * __ssp_disable_rxwm() - disable receive watermark interrupts + * @ssp: pointer to a struct sifive_serial_port + * + * Disable interrupt generation when the receive FIFO watermark is reached + * on the UART referred to by @ssp. + */ +static void __ssp_disable_rxwm(struct sifive_serial_port *ssp) +{ + if (!(ssp->ier & SIFIVE_SERIAL_IE_RXWM_MASK)) + return; + + ssp->ier &= ~SIFIVE_SERIAL_IE_RXWM_MASK; + __ssp_writel(ssp->ier, SIFIVE_SERIAL_IE_OFFS, ssp); +} + +/** + * __ssp_receive_char() - receive a byte from the UART + * @ssp: pointer to a struct sifive_serial_port + * @is_empty: char pointer to return whether the RX FIFO is empty + * + * Try to read a byte from the SiFive UART RX FIFO, referenced by + * @ssp, and to return it. Also returns the RX FIFO empty bit in + * the char pointed to by @ch. The caller must pass the byte back to the + * Linux serial layer if needed. + * + * Returns: the byte read from the UART RX FIFO. + */ +static char __ssp_receive_char(struct sifive_serial_port *ssp, char *is_empty) +{ + u32 v; + u8 ch; + + v = __ssp_readl(ssp, SIFIVE_SERIAL_RXDATA_OFFS); + + if (!is_empty) + WARN_ON(1); + else + *is_empty = (v & SIFIVE_SERIAL_RXDATA_EMPTY_MASK) >> + SIFIVE_SERIAL_RXDATA_EMPTY_SHIFT; + + ch = (v & SIFIVE_SERIAL_RXDATA_DATA_MASK) >> + SIFIVE_SERIAL_RXDATA_DATA_SHIFT; + + return ch; +} + +/** + * __ssp_receive_chars() - receive multiple bytes from the UART + * @ssp: pointer to a struct sifive_serial_port + * + * Receive up to an RX FIFO's worth of bytes from the SiFive UART referred + * to by @ssp and pass them up to the Linux serial layer. + * + * Context: Expects ssp->port.lock to be held by caller. + */ +static void __ssp_receive_chars(struct sifive_serial_port *ssp) +{ + unsigned char ch; + char is_empty; + int c; + + for (c = SIFIVE_RX_FIFO_DEPTH; c > 0; --c) { + ch = __ssp_receive_char(ssp, &is_empty); + if (is_empty) + break; + + ssp->port.icount.rx++; + uart_insert_char(&ssp->port, 0, 0, ch, TTY_NORMAL); + } + + spin_unlock(&ssp->port.lock); + tty_flip_buffer_push(&ssp->port.state->port); + spin_lock(&ssp->port.lock); +} + +/** + * __ssp_update_div() - calculate the divisor setting by the line rate + * @ssp: pointer to a struct sifive_serial_port + * + * Calculate the appropriate value of the clock divisor for the UART + * and target line rate referred to by @ssp and write it into the + * hardware. + */ +static void __ssp_update_div(struct sifive_serial_port *ssp) +{ + u16 div; + + div = DIV_ROUND_UP(ssp->clkin_rate, ssp->baud_rate) - 1; + + __ssp_writel(div, SIFIVE_SERIAL_DIV_OFFS, ssp); +} + +/** + * __ssp_update_baud_rate() - set the UART "baud rate" + * @ssp: pointer to a struct sifive_serial_port + * @rate: new target bit rate + * + * Calculate the UART divisor value for the target bit rate @rate for the + * SiFive UART described by @ssp and program it into the UART. There may + * be some error between the target bit rate and the actual bit rate implemented + * by the UART due to clock ratio granularity. + */ +static void __ssp_update_baud_rate(struct sifive_serial_port *ssp, + unsigned int rate) +{ + if (ssp->baud_rate == rate) + return; + + ssp->baud_rate = rate; + __ssp_update_div(ssp); +} + +/** + * __ssp_set_stop_bits() - set the number of stop bits + * @ssp: pointer to a struct sifive_serial_port + * @nstop: 1 or 2 (stop bits) + * + * Program the SiFive UART referred to by @ssp to use @nstop stop bits. + */ +static void __ssp_set_stop_bits(struct sifive_serial_port *ssp, char nstop) +{ + u32 v; + + if (nstop < 1 || nstop > 2) { + WARN_ON(1); + return; + } + + v = __ssp_readl(ssp, SIFIVE_SERIAL_TXCTRL_OFFS); + v &= ~SIFIVE_SERIAL_TXCTRL_NSTOP_MASK; + v |= (nstop - 1) << SIFIVE_SERIAL_TXCTRL_NSTOP_SHIFT; + __ssp_writel(v, SIFIVE_SERIAL_TXCTRL_OFFS, ssp); +} + +/** + * __ssp_wait_for_xmitr() - wait for an empty slot on the TX FIFO + * @ssp: pointer to a struct sifive_serial_port + * + * Delay while the UART TX FIFO referred to by @ssp is marked as full. + * + * Context: Any context. + */ +static void __maybe_unused __ssp_wait_for_xmitr(struct sifive_serial_port *ssp) +{ + while (sifive_serial_is_txfifo_full(ssp)) + udelay(1); /* XXX Could probably be more intelligent here */ +} + +/* + * Linux serial API functions + */ + +static void sifive_serial_stop_tx(struct uart_port *port) +{ + struct sifive_serial_port *ssp = port_to_sifive_serial_port(port); + + __ssp_disable_txwm(ssp); +} + +static void sifive_serial_stop_rx(struct uart_port *port) +{ + struct sifive_serial_port *ssp = port_to_sifive_serial_port(port); + + __ssp_disable_rxwm(ssp); +} + +static void sifive_serial_start_tx(struct uart_port *port) +{ + struct sifive_serial_port *ssp = port_to_sifive_serial_port(port); + + __ssp_enable_txwm(ssp); +} + +static irqreturn_t sifive_serial_irq(int irq, void *dev_id) +{ + struct sifive_serial_port *ssp = dev_id; + u32 ip; + + spin_lock(&ssp->port.lock); + + ip = __ssp_readl(ssp, SIFIVE_SERIAL_IP_OFFS); + if (!ip) { + spin_unlock(&ssp->port.lock); + return IRQ_NONE; + } + + if (ip & SIFIVE_SERIAL_IP_RXWM_MASK) + __ssp_receive_chars(ssp); + if (ip & SIFIVE_SERIAL_IP_TXWM_MASK) + __ssp_transmit_chars(ssp); + + spin_unlock(&ssp->port.lock); + + return IRQ_HANDLED; +} + +static unsigned int sifive_serial_tx_empty(struct uart_port *port) +{ + return TIOCSER_TEMT; +} + +static unsigned int sifive_serial_get_mctrl(struct uart_port *port) +{ + return TIOCM_CAR | TIOCM_CTS | TIOCM_DSR; +} + +static void sifive_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + /* IP block does not support these signals */ +} + +static void sifive_serial_break_ctl(struct uart_port *port, int break_state) +{ + /* IP block does not support sending a break */ +} + +static int sifive_serial_startup(struct uart_port *port) +{ + struct sifive_serial_port *ssp = port_to_sifive_serial_port(port); + + __ssp_enable_rxwm(ssp); + + return 0; +} + +static void sifive_serial_shutdown(struct uart_port *port) +{ + struct sifive_serial_port *ssp = port_to_sifive_serial_port(port); + + __ssp_disable_rxwm(ssp); + __ssp_disable_txwm(ssp); +} + +/** + * sifive_serial_clk_notifier() - clock post-rate-change notifier + * @nb: pointer to the struct notifier_block, from the notifier code + * @event: event mask from the notifier code + * @data: pointer to the struct clk_notifier_data from the notifier code + * + * On the V0 SoC, the UART IP block is derived from the CPU clock source + * after a synchronous divide-by-two divider, so any CPU clock rate change + * requires the UART baud rate to be updated. This presumably corrupts any + * serial word currently being transmitted or received. In order to avoid + * corrupting the output data stream, we drain the transmit queue before + * allowing the clock's rate to be changed. + */ +static int sifive_serial_clk_notifier(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct clk_notifier_data *cnd = data; + struct sifive_serial_port *ssp = notifier_to_sifive_serial_port(nb); + + if (event == PRE_RATE_CHANGE) { + /* + * The TX watermark is always set to 1 by this driver, which + * means that the TX busy bit will lower when there are 0 bytes + * left in the TX queue -- in other words, when the TX FIFO is + * empty. + */ + __ssp_wait_for_xmitr(ssp); + /* + * On the cycle the TX FIFO goes empty there is still a full + * UART frame left to be transmitted in the shift register. + * The UART provides no way for software to directly determine + * when that last frame has been transmitted, so we just sleep + * here instead. As we're not tracking the number of stop bits + * they're just worst cased here. The rest of the serial + * framing parameters aren't configurable by software. + */ + udelay(DIV_ROUND_UP(12 * 1000 * 1000, ssp->baud_rate)); + } + + if (event == POST_RATE_CHANGE && ssp->clkin_rate != cnd->new_rate) { + ssp->clkin_rate = cnd->new_rate; + __ssp_update_div(ssp); + } + + return NOTIFY_OK; +} + +static void sifive_serial_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + struct sifive_serial_port *ssp = port_to_sifive_serial_port(port); + unsigned long flags; + u32 v, old_v; + int rate; + char nstop; + + if ((termios->c_cflag & CSIZE) != CS8) { + dev_err_once(ssp->port.dev, "only 8-bit words supported\n"); + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= CS8; + } + if (termios->c_iflag & (INPCK | PARMRK)) + dev_err_once(ssp->port.dev, "parity checking not supported\n"); + if (termios->c_iflag & BRKINT) + dev_err_once(ssp->port.dev, "BREAK detection not supported\n"); + termios->c_iflag &= ~(INPCK|PARMRK|BRKINT); + + /* Set number of stop bits */ + nstop = (termios->c_cflag & CSTOPB) ? 2 : 1; + __ssp_set_stop_bits(ssp, nstop); + + /* Set line rate */ + rate = uart_get_baud_rate(port, termios, old, 0, ssp->clkin_rate / 16); + __ssp_update_baud_rate(ssp, rate); + + spin_lock_irqsave(&ssp->port.lock, flags); + + /* Update the per-port timeout */ + uart_update_timeout(port, termios->c_cflag, rate); + + ssp->port.read_status_mask = 0; + + /* Ignore all characters if CREAD is not set */ + v = __ssp_readl(ssp, SIFIVE_SERIAL_RXCTRL_OFFS); + old_v = v; + if ((termios->c_cflag & CREAD) == 0) + v &= SIFIVE_SERIAL_RXCTRL_RXEN_MASK; + else + v |= SIFIVE_SERIAL_RXCTRL_RXEN_MASK; + if (v != old_v) + __ssp_writel(v, SIFIVE_SERIAL_RXCTRL_OFFS, ssp); + + spin_unlock_irqrestore(&ssp->port.lock, flags); +} + +static void sifive_serial_release_port(struct uart_port *port) +{ +} + +static int sifive_serial_request_port(struct uart_port *port) +{ + return 0; +} + +static void sifive_serial_config_port(struct uart_port *port, int flags) +{ + struct sifive_serial_port *ssp = port_to_sifive_serial_port(port); + + ssp->port.type = PORT_SIFIVE_V0; +} + +static int sifive_serial_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + return -EINVAL; +} + +static const char *sifive_serial_type(struct uart_port *port) +{ + return port->type == PORT_SIFIVE_V0 ? "SiFive UART v0" : NULL; +} + +#ifdef CONFIG_CONSOLE_POLL +static int sifive_serial_poll_get_char(struct uart_port *port) +{ + struct sifive_serial_port *ssp = port_to_sifive_serial_port(port); + char is_empty, ch; + + ch = __ssp_receive_char(ssp, &is_empty); + if (is_empty) + return NO_POLL_CHAR; + + return ch; +} + +static void sifive_serial_poll_put_char(struct uart_port *port, + unsigned char c) +{ + struct sifive_serial_port *ssp = port_to_sifive_serial_port(port); + + __ssp_wait_for_xmitr(ssp); + __ssp_transmit_char(ssp, c); +} +#endif /* CONFIG_CONSOLE_POLL */ + +/* + * Early console support + */ + +#ifdef CONFIG_SERIAL_EARLYCON +static void early_sifive_serial_putc(struct uart_port *port, int c) +{ + while (__ssp_early_readl(port, SIFIVE_SERIAL_TXDATA_OFFS) & + SIFIVE_SERIAL_TXDATA_FULL_MASK) + cpu_relax(); + + __ssp_early_writel(c, SIFIVE_SERIAL_TXDATA_OFFS, port); +} + +static void early_sifive_serial_write(struct console *con, const char *s, + unsigned int n) +{ + struct earlycon_device *dev = con->data; + struct uart_port *port = &dev->port; + + uart_console_write(port, s, n, early_sifive_serial_putc); +} + +static int __init early_sifive_serial_setup(struct earlycon_device *dev, + const char *options) +{ + struct uart_port *port = &dev->port; + + if (!port->membase) + return -ENODEV; + + dev->con->write = early_sifive_serial_write; + + return 0; +} + +OF_EARLYCON_DECLARE(sifive, "sifive,uart0", early_sifive_serial_setup); +OF_EARLYCON_DECLARE(sifive, "sifive,fu540-c000-uart0", + early_sifive_serial_setup); +#endif /* CONFIG_SERIAL_EARLYCON */ + +/* + * Linux console interface + */ + +#ifdef CONFIG_SERIAL_SIFIVE_CONSOLE + +static struct sifive_serial_port *sifive_serial_console_ports[SIFIVE_SERIAL_MAX_PORTS]; + +static void sifive_serial_console_putchar(struct uart_port *port, int ch) +{ + struct sifive_serial_port *ssp = port_to_sifive_serial_port(port); + + __ssp_wait_for_xmitr(ssp); + __ssp_transmit_char(ssp, ch); +} + +static void sifive_serial_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct sifive_serial_port *ssp = sifive_serial_console_ports[co->index]; + unsigned long flags; + unsigned int ier; + int locked = 1; + + if (!ssp) + return; + + local_irq_save(flags); + if (ssp->port.sysrq) + locked = 0; + else if (oops_in_progress) + locked = spin_trylock(&ssp->port.lock); + else + spin_lock(&ssp->port.lock); + + ier = __ssp_readl(ssp, SIFIVE_SERIAL_IE_OFFS); + __ssp_writel(0, SIFIVE_SERIAL_IE_OFFS, ssp); + + uart_console_write(&ssp->port, s, count, sifive_serial_console_putchar); + + __ssp_writel(ier, SIFIVE_SERIAL_IE_OFFS, ssp); + + if (locked) + spin_unlock(&ssp->port.lock); + local_irq_restore(flags); +} + +static int sifive_serial_console_setup(struct console *co, char *options) +{ + struct sifive_serial_port *ssp; + int baud = SIFIVE_DEFAULT_BAUD_RATE; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index < 0 || co->index >= SIFIVE_SERIAL_MAX_PORTS) + return -ENODEV; + + ssp = sifive_serial_console_ports[co->index]; + if (!ssp) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&ssp->port, co, baud, parity, bits, flow); +} + +static struct uart_driver sifive_serial_uart_driver; + +static struct console sifive_serial_console = { + .name = SIFIVE_TTY_PREFIX, + .write = sifive_serial_console_write, + .device = uart_console_device, + .setup = sifive_serial_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &sifive_serial_uart_driver, +}; + +static int __init sifive_console_init(void) +{ + register_console(&sifive_serial_console); + return 0; +} + +console_initcall(sifive_console_init); + +static void __ssp_add_console_port(struct sifive_serial_port *ssp) +{ + sifive_serial_console_ports[ssp->port.line] = ssp; +} + +static void __ssp_remove_console_port(struct sifive_serial_port *ssp) +{ + sifive_serial_console_ports[ssp->port.line] = 0; +} + +#define SIFIVE_SERIAL_CONSOLE (&sifive_serial_console) + +#else + +#define SIFIVE_SERIAL_CONSOLE NULL + +static void __ssp_add_console_port(struct sifive_serial_port *ssp) +{} +static void __ssp_remove_console_port(struct sifive_serial_port *ssp) +{} + +#endif + +static const struct uart_ops sifive_serial_uops = { + .tx_empty = sifive_serial_tx_empty, + .set_mctrl = sifive_serial_set_mctrl, + .get_mctrl = sifive_serial_get_mctrl, + .stop_tx = sifive_serial_stop_tx, + .start_tx = sifive_serial_start_tx, + .stop_rx = sifive_serial_stop_rx, + .break_ctl = sifive_serial_break_ctl, + .startup = sifive_serial_startup, + .shutdown = sifive_serial_shutdown, + .set_termios = sifive_serial_set_termios, + .type = sifive_serial_type, + .release_port = sifive_serial_release_port, + .request_port = sifive_serial_request_port, + .config_port = sifive_serial_config_port, + .verify_port = sifive_serial_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = sifive_serial_poll_get_char, + .poll_put_char = sifive_serial_poll_put_char, +#endif +}; + +static struct uart_driver sifive_serial_uart_driver = { + .owner = THIS_MODULE, + .driver_name = SIFIVE_SERIAL_NAME, + .dev_name = SIFIVE_TTY_PREFIX, + .nr = SIFIVE_SERIAL_MAX_PORTS, + .cons = SIFIVE_SERIAL_CONSOLE, +}; + +static int sifive_serial_probe(struct platform_device *pdev) +{ + struct sifive_serial_port *ssp; + struct resource *mem; + struct clk *clk; + void __iomem *base; + int irq, id, r; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return -EPROBE_DEFER; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(&pdev->dev, mem); + if (IS_ERR(base)) { + dev_err(&pdev->dev, "could not acquire device memory\n"); + return PTR_ERR(base); + } + + clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "unable to find controller clock\n"); + return PTR_ERR(clk); + } + + id = of_alias_get_id(pdev->dev.of_node, "serial"); + if (id < 0) { + dev_err(&pdev->dev, "missing aliases entry\n"); + return id; + } + +#ifdef CONFIG_SERIAL_SIFIVE_CONSOLE + if (id > SIFIVE_SERIAL_MAX_PORTS) { + dev_err(&pdev->dev, "too many UARTs (%d)\n", id); + return -EINVAL; + } +#endif + + ssp = devm_kzalloc(&pdev->dev, sizeof(*ssp), GFP_KERNEL); + if (!ssp) + return -ENOMEM; + + ssp->port.dev = &pdev->dev; + ssp->port.type = PORT_SIFIVE_V0; + ssp->port.iotype = UPIO_MEM; + ssp->port.irq = irq; + ssp->port.fifosize = SIFIVE_TX_FIFO_DEPTH; + ssp->port.ops = &sifive_serial_uops; + ssp->port.line = id; + ssp->port.mapbase = mem->start; + ssp->port.membase = base; + ssp->dev = &pdev->dev; + ssp->clk = clk; + ssp->clk_notifier.notifier_call = sifive_serial_clk_notifier; + + r = clk_notifier_register(ssp->clk, &ssp->clk_notifier); + if (r) { + dev_err(&pdev->dev, "could not register clock notifier: %d\n", + r); + goto probe_out1; + } + + /* Set up clock divider */ + ssp->clkin_rate = clk_get_rate(ssp->clk); + ssp->baud_rate = SIFIVE_DEFAULT_BAUD_RATE; + ssp->port.uartclk = ssp->clkin_rate; + __ssp_update_div(ssp); + + platform_set_drvdata(pdev, ssp); + + /* Enable transmits and set the watermark level to 1 */ + __ssp_writel((1 << SIFIVE_SERIAL_TXCTRL_TXCNT_SHIFT) | + SIFIVE_SERIAL_TXCTRL_TXEN_MASK, + SIFIVE_SERIAL_TXCTRL_OFFS, ssp); + + /* Enable receives and set the watermark level to 0 */ + __ssp_writel((0 << SIFIVE_SERIAL_RXCTRL_RXCNT_SHIFT) | + SIFIVE_SERIAL_RXCTRL_RXEN_MASK, + SIFIVE_SERIAL_RXCTRL_OFFS, ssp); + + r = request_irq(ssp->port.irq, sifive_serial_irq, ssp->port.irqflags, + dev_name(&pdev->dev), ssp); + if (r) { + dev_err(&pdev->dev, "could not attach interrupt: %d\n", r); + goto probe_out2; + } + + __ssp_add_console_port(ssp); + + r = uart_add_one_port(&sifive_serial_uart_driver, &ssp->port); + if (r != 0) { + dev_err(&pdev->dev, "could not add uart: %d\n", r); + goto probe_out3; + } + + return 0; + +probe_out3: + __ssp_remove_console_port(ssp); + free_irq(ssp->port.irq, ssp); +probe_out2: + clk_notifier_unregister(ssp->clk, &ssp->clk_notifier); +probe_out1: + return r; +} + +static int sifive_serial_remove(struct platform_device *dev) +{ + struct sifive_serial_port *ssp = platform_get_drvdata(dev); + + __ssp_remove_console_port(ssp); + uart_remove_one_port(&sifive_serial_uart_driver, &ssp->port); + free_irq(ssp->port.irq, ssp); + clk_notifier_unregister(ssp->clk, &ssp->clk_notifier); + + return 0; +} + +static const struct of_device_id sifive_serial_of_match[] = { + { .compatible = "sifive,fu540-c000-uart0" }, + { .compatible = "sifive,uart0" }, + {}, +}; +MODULE_DEVICE_TABLE(of, sifive_serial_of_match); + +static struct platform_driver sifive_serial_platform_driver = { + .probe = sifive_serial_probe, + .remove = sifive_serial_remove, + .driver = { + .name = SIFIVE_SERIAL_NAME, + .of_match_table = of_match_ptr(sifive_serial_of_match), + }, +}; + +static int __init sifive_serial_init(void) +{ + int r; + + r = uart_register_driver(&sifive_serial_uart_driver); + if (r) + goto init_out1; + + r = platform_driver_register(&sifive_serial_platform_driver); + if (r) + goto init_out2; + + return 0; + +init_out2: + uart_unregister_driver(&sifive_serial_uart_driver); +init_out1: + return r; +} + +static void __exit sifive_serial_exit(void) +{ + platform_driver_unregister(&sifive_serial_platform_driver); + uart_unregister_driver(&sifive_serial_uart_driver); +} + +module_init(sifive_serial_init); +module_exit(sifive_serial_exit); + +MODULE_DESCRIPTION("SiFive UART serial driver"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Paul Walmsley "); diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c new file mode 100644 index 000000000..38622f2a3 --- /dev/null +++ b/drivers/tty/serial/sirfsoc_uart.c @@ -0,0 +1,1503 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver for CSR SiRFprimaII onboard UARTs. + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "sirfsoc_uart.h" + +static unsigned int +sirfsoc_uart_pio_tx_chars(struct sirfsoc_uart_port *sirfport, int count); +static unsigned int +sirfsoc_uart_pio_rx_chars(struct uart_port *port, unsigned int max_rx_count); +static struct uart_driver sirfsoc_uart_drv; + +static void sirfsoc_uart_tx_dma_complete_callback(void *param); +static const struct sirfsoc_baudrate_to_regv baudrate_to_regv[] = { + {4000000, 2359296}, + {3500000, 1310721}, + {3000000, 1572865}, + {2500000, 1245186}, + {2000000, 1572866}, + {1500000, 1245188}, + {1152000, 1638404}, + {1000000, 1572869}, + {921600, 1114120}, + {576000, 1245196}, + {500000, 1245198}, + {460800, 1572876}, + {230400, 1310750}, + {115200, 1310781}, + {57600, 1310843}, + {38400, 1114328}, + {19200, 1114545}, + {9600, 1114979}, +}; + +static struct sirfsoc_uart_port *sirf_ports[SIRFSOC_UART_NR]; + +static inline struct sirfsoc_uart_port *to_sirfport(struct uart_port *port) +{ + return container_of(port, struct sirfsoc_uart_port, port); +} + +static inline unsigned int sirfsoc_uart_tx_empty(struct uart_port *port) +{ + unsigned long reg; + struct sirfsoc_uart_port *sirfport = to_sirfport(port); + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; + struct sirfsoc_fifo_status *ufifo_st = &sirfport->uart_reg->fifo_status; + reg = rd_regl(port, ureg->sirfsoc_tx_fifo_status); + return (reg & ufifo_st->ff_empty(port)) ? TIOCSER_TEMT : 0; +} + +static unsigned int sirfsoc_uart_get_mctrl(struct uart_port *port) +{ + struct sirfsoc_uart_port *sirfport = to_sirfport(port); + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; + if (!sirfport->hw_flow_ctrl || !sirfport->ms_enabled) + goto cts_asserted; + if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) { + if (!(rd_regl(port, ureg->sirfsoc_afc_ctrl) & + SIRFUART_AFC_CTS_STATUS)) + goto cts_asserted; + else + goto cts_deasserted; + } else { + if (!gpio_get_value(sirfport->cts_gpio)) + goto cts_asserted; + else + goto cts_deasserted; + } +cts_deasserted: + return TIOCM_CAR | TIOCM_DSR; +cts_asserted: + return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; +} + +static void sirfsoc_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct sirfsoc_uart_port *sirfport = to_sirfport(port); + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; + unsigned int assert = mctrl & TIOCM_RTS; + unsigned int val = assert ? SIRFUART_AFC_CTRL_RX_THD : 0x0; + unsigned int current_val; + + if (mctrl & TIOCM_LOOP) { + if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) + wr_regl(port, ureg->sirfsoc_line_ctrl, + rd_regl(port, ureg->sirfsoc_line_ctrl) | + SIRFUART_LOOP_BACK); + else + wr_regl(port, ureg->sirfsoc_mode1, + rd_regl(port, ureg->sirfsoc_mode1) | + SIRFSOC_USP_LOOP_BACK_CTRL); + } else { + if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) + wr_regl(port, ureg->sirfsoc_line_ctrl, + rd_regl(port, ureg->sirfsoc_line_ctrl) & + ~SIRFUART_LOOP_BACK); + else + wr_regl(port, ureg->sirfsoc_mode1, + rd_regl(port, ureg->sirfsoc_mode1) & + ~SIRFSOC_USP_LOOP_BACK_CTRL); + } + + if (!sirfport->hw_flow_ctrl || !sirfport->ms_enabled) + return; + if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) { + current_val = rd_regl(port, ureg->sirfsoc_afc_ctrl) & ~0xFF; + val |= current_val; + wr_regl(port, ureg->sirfsoc_afc_ctrl, val); + } else { + if (!val) + gpio_set_value(sirfport->rts_gpio, 1); + else + gpio_set_value(sirfport->rts_gpio, 0); + } +} + +static void sirfsoc_uart_stop_tx(struct uart_port *port) +{ + struct sirfsoc_uart_port *sirfport = to_sirfport(port); + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; + struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; + + if (sirfport->tx_dma_chan) { + if (sirfport->tx_dma_state == TX_DMA_RUNNING) { + dmaengine_pause(sirfport->tx_dma_chan); + sirfport->tx_dma_state = TX_DMA_PAUSE; + } else { + if (!sirfport->is_atlas7) + wr_regl(port, ureg->sirfsoc_int_en_reg, + rd_regl(port, ureg->sirfsoc_int_en_reg) & + ~uint_en->sirfsoc_txfifo_empty_en); + else + wr_regl(port, ureg->sirfsoc_int_en_clr_reg, + uint_en->sirfsoc_txfifo_empty_en); + } + } else { + if (sirfport->uart_reg->uart_type == SIRF_USP_UART) + wr_regl(port, ureg->sirfsoc_tx_rx_en, rd_regl(port, + ureg->sirfsoc_tx_rx_en) & ~SIRFUART_TX_EN); + if (!sirfport->is_atlas7) + wr_regl(port, ureg->sirfsoc_int_en_reg, + rd_regl(port, ureg->sirfsoc_int_en_reg) & + ~uint_en->sirfsoc_txfifo_empty_en); + else + wr_regl(port, ureg->sirfsoc_int_en_clr_reg, + uint_en->sirfsoc_txfifo_empty_en); + } +} + +static void sirfsoc_uart_tx_with_dma(struct sirfsoc_uart_port *sirfport) +{ + struct uart_port *port = &sirfport->port; + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; + struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; + struct circ_buf *xmit = &port->state->xmit; + unsigned long tran_size; + unsigned long tran_start; + unsigned long pio_tx_size; + + tran_size = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); + tran_start = (unsigned long)(xmit->buf + xmit->tail); + if (uart_circ_empty(xmit) || uart_tx_stopped(port) || + !tran_size) + return; + if (sirfport->tx_dma_state == TX_DMA_PAUSE) { + dmaengine_resume(sirfport->tx_dma_chan); + return; + } + if (sirfport->tx_dma_state == TX_DMA_RUNNING) + return; + if (!sirfport->is_atlas7) + wr_regl(port, ureg->sirfsoc_int_en_reg, + rd_regl(port, ureg->sirfsoc_int_en_reg)& + ~(uint_en->sirfsoc_txfifo_empty_en)); + else + wr_regl(port, ureg->sirfsoc_int_en_clr_reg, + uint_en->sirfsoc_txfifo_empty_en); + /* + * DMA requires buffer address and buffer length are both aligned with + * 4 bytes, so we use PIO for + * 1. if address is not aligned with 4bytes, use PIO for the first 1~3 + * bytes, and move to DMA for the left part aligned with 4bytes + * 2. if buffer length is not aligned with 4bytes, use DMA for aligned + * part first, move to PIO for the left 1~3 bytes + */ + if (tran_size < 4 || BYTES_TO_ALIGN(tran_start)) { + wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_STOP); + wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl, + rd_regl(port, ureg->sirfsoc_tx_dma_io_ctrl)| + SIRFUART_IO_MODE); + if (BYTES_TO_ALIGN(tran_start)) { + pio_tx_size = sirfsoc_uart_pio_tx_chars(sirfport, + BYTES_TO_ALIGN(tran_start)); + tran_size -= pio_tx_size; + } + if (tran_size < 4) + sirfsoc_uart_pio_tx_chars(sirfport, tran_size); + if (!sirfport->is_atlas7) + wr_regl(port, ureg->sirfsoc_int_en_reg, + rd_regl(port, ureg->sirfsoc_int_en_reg)| + uint_en->sirfsoc_txfifo_empty_en); + else + wr_regl(port, ureg->sirfsoc_int_en_reg, + uint_en->sirfsoc_txfifo_empty_en); + wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_START); + } else { + /* tx transfer mode switch into dma mode */ + wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_STOP); + wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl, + rd_regl(port, ureg->sirfsoc_tx_dma_io_ctrl)& + ~SIRFUART_IO_MODE); + wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_START); + tran_size &= ~(0x3); + + sirfport->tx_dma_addr = dma_map_single(port->dev, + xmit->buf + xmit->tail, + tran_size, DMA_TO_DEVICE); + sirfport->tx_dma_desc = dmaengine_prep_slave_single( + sirfport->tx_dma_chan, sirfport->tx_dma_addr, + tran_size, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT); + if (!sirfport->tx_dma_desc) { + dev_err(port->dev, "DMA prep slave single fail\n"); + return; + } + sirfport->tx_dma_desc->callback = + sirfsoc_uart_tx_dma_complete_callback; + sirfport->tx_dma_desc->callback_param = (void *)sirfport; + sirfport->transfer_size = tran_size; + + dmaengine_submit(sirfport->tx_dma_desc); + dma_async_issue_pending(sirfport->tx_dma_chan); + sirfport->tx_dma_state = TX_DMA_RUNNING; + } +} + +static void sirfsoc_uart_start_tx(struct uart_port *port) +{ + struct sirfsoc_uart_port *sirfport = to_sirfport(port); + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; + struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; + if (sirfport->tx_dma_chan) + sirfsoc_uart_tx_with_dma(sirfport); + else { + if (sirfport->uart_reg->uart_type == SIRF_USP_UART) + wr_regl(port, ureg->sirfsoc_tx_rx_en, rd_regl(port, + ureg->sirfsoc_tx_rx_en) | SIRFUART_TX_EN); + wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_STOP); + sirfsoc_uart_pio_tx_chars(sirfport, port->fifosize); + wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_START); + if (!sirfport->is_atlas7) + wr_regl(port, ureg->sirfsoc_int_en_reg, + rd_regl(port, ureg->sirfsoc_int_en_reg)| + uint_en->sirfsoc_txfifo_empty_en); + else + wr_regl(port, ureg->sirfsoc_int_en_reg, + uint_en->sirfsoc_txfifo_empty_en); + } +} + +static void sirfsoc_uart_stop_rx(struct uart_port *port) +{ + struct sirfsoc_uart_port *sirfport = to_sirfport(port); + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; + struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; + + wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0); + if (sirfport->rx_dma_chan) { + if (!sirfport->is_atlas7) + wr_regl(port, ureg->sirfsoc_int_en_reg, + rd_regl(port, ureg->sirfsoc_int_en_reg) & + ~(SIRFUART_RX_DMA_INT_EN(uint_en, + sirfport->uart_reg->uart_type) | + uint_en->sirfsoc_rx_done_en)); + else + wr_regl(port, ureg->sirfsoc_int_en_clr_reg, + SIRFUART_RX_DMA_INT_EN(uint_en, + sirfport->uart_reg->uart_type)| + uint_en->sirfsoc_rx_done_en); + dmaengine_terminate_all(sirfport->rx_dma_chan); + } else { + if (!sirfport->is_atlas7) + wr_regl(port, ureg->sirfsoc_int_en_reg, + rd_regl(port, ureg->sirfsoc_int_en_reg)& + ~(SIRFUART_RX_IO_INT_EN(uint_en, + sirfport->uart_reg->uart_type))); + else + wr_regl(port, ureg->sirfsoc_int_en_clr_reg, + SIRFUART_RX_IO_INT_EN(uint_en, + sirfport->uart_reg->uart_type)); + } +} + +static void sirfsoc_uart_disable_ms(struct uart_port *port) +{ + struct sirfsoc_uart_port *sirfport = to_sirfport(port); + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; + struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; + + if (!sirfport->hw_flow_ctrl) + return; + sirfport->ms_enabled = false; + if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) { + wr_regl(port, ureg->sirfsoc_afc_ctrl, + rd_regl(port, ureg->sirfsoc_afc_ctrl) & ~0x3FF); + if (!sirfport->is_atlas7) + wr_regl(port, ureg->sirfsoc_int_en_reg, + rd_regl(port, ureg->sirfsoc_int_en_reg)& + ~uint_en->sirfsoc_cts_en); + else + wr_regl(port, ureg->sirfsoc_int_en_clr_reg, + uint_en->sirfsoc_cts_en); + } else + disable_irq(gpio_to_irq(sirfport->cts_gpio)); +} + +static irqreturn_t sirfsoc_uart_usp_cts_handler(int irq, void *dev_id) +{ + struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)dev_id; + struct uart_port *port = &sirfport->port; + spin_lock(&port->lock); + if (gpio_is_valid(sirfport->cts_gpio) && sirfport->ms_enabled) + uart_handle_cts_change(port, + !gpio_get_value(sirfport->cts_gpio)); + spin_unlock(&port->lock); + return IRQ_HANDLED; +} + +static void sirfsoc_uart_enable_ms(struct uart_port *port) +{ + struct sirfsoc_uart_port *sirfport = to_sirfport(port); + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; + struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; + + if (!sirfport->hw_flow_ctrl) + return; + sirfport->ms_enabled = true; + if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) { + wr_regl(port, ureg->sirfsoc_afc_ctrl, + rd_regl(port, ureg->sirfsoc_afc_ctrl) | + SIRFUART_AFC_TX_EN | SIRFUART_AFC_RX_EN | + SIRFUART_AFC_CTRL_RX_THD); + if (!sirfport->is_atlas7) + wr_regl(port, ureg->sirfsoc_int_en_reg, + rd_regl(port, ureg->sirfsoc_int_en_reg) + | uint_en->sirfsoc_cts_en); + else + wr_regl(port, ureg->sirfsoc_int_en_reg, + uint_en->sirfsoc_cts_en); + } else + enable_irq(gpio_to_irq(sirfport->cts_gpio)); +} + +static void sirfsoc_uart_break_ctl(struct uart_port *port, int break_state) +{ + struct sirfsoc_uart_port *sirfport = to_sirfport(port); + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; + if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) { + unsigned long ulcon = rd_regl(port, ureg->sirfsoc_line_ctrl); + if (break_state) + ulcon |= SIRFUART_SET_BREAK; + else + ulcon &= ~SIRFUART_SET_BREAK; + wr_regl(port, ureg->sirfsoc_line_ctrl, ulcon); + } +} + +static unsigned int +sirfsoc_uart_pio_rx_chars(struct uart_port *port, unsigned int max_rx_count) +{ + struct sirfsoc_uart_port *sirfport = to_sirfport(port); + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; + struct sirfsoc_fifo_status *ufifo_st = &sirfport->uart_reg->fifo_status; + unsigned int ch, rx_count = 0; + struct tty_struct *tty; + tty = tty_port_tty_get(&port->state->port); + if (!tty) + return -ENODEV; + while (!(rd_regl(port, ureg->sirfsoc_rx_fifo_status) & + ufifo_st->ff_empty(port))) { + ch = rd_regl(port, ureg->sirfsoc_rx_fifo_data) | + SIRFUART_DUMMY_READ; + if (unlikely(uart_handle_sysrq_char(port, ch))) + continue; + uart_insert_char(port, 0, 0, ch, TTY_NORMAL); + rx_count++; + if (rx_count >= max_rx_count) + break; + } + + port->icount.rx += rx_count; + + return rx_count; +} + +static unsigned int +sirfsoc_uart_pio_tx_chars(struct sirfsoc_uart_port *sirfport, int count) +{ + struct uart_port *port = &sirfport->port; + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; + struct sirfsoc_fifo_status *ufifo_st = &sirfport->uart_reg->fifo_status; + struct circ_buf *xmit = &port->state->xmit; + unsigned int num_tx = 0; + while (!uart_circ_empty(xmit) && + !(rd_regl(port, ureg->sirfsoc_tx_fifo_status) & + ufifo_st->ff_full(port)) && + count--) { + wr_regl(port, ureg->sirfsoc_tx_fifo_data, + xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + num_tx++; + } + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + return num_tx; +} + +static void sirfsoc_uart_tx_dma_complete_callback(void *param) +{ + struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)param; + struct uart_port *port = &sirfport->port; + struct circ_buf *xmit = &port->state->xmit; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + xmit->tail = (xmit->tail + sirfport->transfer_size) & + (UART_XMIT_SIZE - 1); + port->icount.tx += sirfport->transfer_size; + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + if (sirfport->tx_dma_addr) + dma_unmap_single(port->dev, sirfport->tx_dma_addr, + sirfport->transfer_size, DMA_TO_DEVICE); + sirfport->tx_dma_state = TX_DMA_IDLE; + sirfsoc_uart_tx_with_dma(sirfport); + spin_unlock_irqrestore(&port->lock, flags); +} + +static irqreturn_t sirfsoc_uart_isr(int irq, void *dev_id) +{ + unsigned long intr_status; + unsigned long cts_status; + unsigned long flag = TTY_NORMAL; + struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)dev_id; + struct uart_port *port = &sirfport->port; + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; + struct sirfsoc_fifo_status *ufifo_st = &sirfport->uart_reg->fifo_status; + struct sirfsoc_int_status *uint_st = &sirfport->uart_reg->uart_int_st; + struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; + struct uart_state *state = port->state; + struct circ_buf *xmit = &port->state->xmit; + spin_lock(&port->lock); + intr_status = rd_regl(port, ureg->sirfsoc_int_st_reg); + wr_regl(port, ureg->sirfsoc_int_st_reg, intr_status); + intr_status &= rd_regl(port, ureg->sirfsoc_int_en_reg); + if (unlikely(intr_status & (SIRFUART_ERR_INT_STAT(uint_st, + sirfport->uart_reg->uart_type)))) { + if (intr_status & uint_st->sirfsoc_rxd_brk) { + port->icount.brk++; + if (uart_handle_break(port)) + goto recv_char; + } + if (intr_status & uint_st->sirfsoc_rx_oflow) { + port->icount.overrun++; + flag = TTY_OVERRUN; + } + if (intr_status & uint_st->sirfsoc_frm_err) { + port->icount.frame++; + flag = TTY_FRAME; + } + if (intr_status & uint_st->sirfsoc_parity_err) { + port->icount.parity++; + flag = TTY_PARITY; + } + wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_RESET); + wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0); + wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_START); + intr_status &= port->read_status_mask; + uart_insert_char(port, intr_status, + uint_en->sirfsoc_rx_oflow_en, 0, flag); + } +recv_char: + if ((sirfport->uart_reg->uart_type == SIRF_REAL_UART) && + (intr_status & SIRFUART_CTS_INT_ST(uint_st)) && + !sirfport->tx_dma_state) { + cts_status = rd_regl(port, ureg->sirfsoc_afc_ctrl) & + SIRFUART_AFC_CTS_STATUS; + if (cts_status != 0) + cts_status = 0; + else + cts_status = 1; + uart_handle_cts_change(port, cts_status); + wake_up_interruptible(&state->port.delta_msr_wait); + } + if (!sirfport->rx_dma_chan && + (intr_status & SIRFUART_RX_IO_INT_ST(uint_st))) { + /* + * chip will trigger continuous RX_TIMEOUT interrupt + * in RXFIFO empty and not trigger if RXFIFO recevice + * data in limit time, original method use RX_TIMEOUT + * will trigger lots of useless interrupt in RXFIFO + * empty.RXFIFO received one byte will trigger RX_DONE + * interrupt.use RX_DONE to wait for data received + * into RXFIFO, use RX_THD/RX_FULL for lots data receive + * and use RX_TIMEOUT for the last left data. + */ + if (intr_status & uint_st->sirfsoc_rx_done) { + if (!sirfport->is_atlas7) { + wr_regl(port, ureg->sirfsoc_int_en_reg, + rd_regl(port, ureg->sirfsoc_int_en_reg) + & ~(uint_en->sirfsoc_rx_done_en)); + wr_regl(port, ureg->sirfsoc_int_en_reg, + rd_regl(port, ureg->sirfsoc_int_en_reg) + | (uint_en->sirfsoc_rx_timeout_en)); + } else { + wr_regl(port, ureg->sirfsoc_int_en_clr_reg, + uint_en->sirfsoc_rx_done_en); + wr_regl(port, ureg->sirfsoc_int_en_reg, + uint_en->sirfsoc_rx_timeout_en); + } + } else { + if (intr_status & uint_st->sirfsoc_rx_timeout) { + if (!sirfport->is_atlas7) { + wr_regl(port, ureg->sirfsoc_int_en_reg, + rd_regl(port, ureg->sirfsoc_int_en_reg) + & ~(uint_en->sirfsoc_rx_timeout_en)); + wr_regl(port, ureg->sirfsoc_int_en_reg, + rd_regl(port, ureg->sirfsoc_int_en_reg) + | (uint_en->sirfsoc_rx_done_en)); + } else { + wr_regl(port, + ureg->sirfsoc_int_en_clr_reg, + uint_en->sirfsoc_rx_timeout_en); + wr_regl(port, ureg->sirfsoc_int_en_reg, + uint_en->sirfsoc_rx_done_en); + } + } + sirfsoc_uart_pio_rx_chars(port, port->fifosize); + } + } + spin_unlock(&port->lock); + tty_flip_buffer_push(&state->port); + spin_lock(&port->lock); + if (intr_status & uint_st->sirfsoc_txfifo_empty) { + if (sirfport->tx_dma_chan) + sirfsoc_uart_tx_with_dma(sirfport); + else { + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + spin_unlock(&port->lock); + return IRQ_HANDLED; + } else { + sirfsoc_uart_pio_tx_chars(sirfport, + port->fifosize); + if ((uart_circ_empty(xmit)) && + (rd_regl(port, ureg->sirfsoc_tx_fifo_status) & + ufifo_st->ff_empty(port))) + sirfsoc_uart_stop_tx(port); + } + } + } + spin_unlock(&port->lock); + + return IRQ_HANDLED; +} + +static void sirfsoc_uart_rx_dma_complete_callback(void *param) +{ +} + +/* submit rx dma task into dmaengine */ +static void sirfsoc_uart_start_next_rx_dma(struct uart_port *port) +{ + struct sirfsoc_uart_port *sirfport = to_sirfport(port); + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; + struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; + wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, + rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) & + ~SIRFUART_IO_MODE); + sirfport->rx_dma_items.xmit.tail = + sirfport->rx_dma_items.xmit.head = 0; + sirfport->rx_dma_items.desc = + dmaengine_prep_dma_cyclic(sirfport->rx_dma_chan, + sirfport->rx_dma_items.dma_addr, SIRFSOC_RX_DMA_BUF_SIZE, + SIRFSOC_RX_DMA_BUF_SIZE / 2, + DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT); + if (IS_ERR_OR_NULL(sirfport->rx_dma_items.desc)) { + dev_err(port->dev, "DMA slave single fail\n"); + return; + } + sirfport->rx_dma_items.desc->callback = + sirfsoc_uart_rx_dma_complete_callback; + sirfport->rx_dma_items.desc->callback_param = sirfport; + sirfport->rx_dma_items.cookie = + dmaengine_submit(sirfport->rx_dma_items.desc); + dma_async_issue_pending(sirfport->rx_dma_chan); + if (!sirfport->is_atlas7) + wr_regl(port, ureg->sirfsoc_int_en_reg, + rd_regl(port, ureg->sirfsoc_int_en_reg) | + SIRFUART_RX_DMA_INT_EN(uint_en, + sirfport->uart_reg->uart_type)); + else + wr_regl(port, ureg->sirfsoc_int_en_reg, + SIRFUART_RX_DMA_INT_EN(uint_en, + sirfport->uart_reg->uart_type)); +} + +static unsigned int +sirfsoc_usp_calc_sample_div(unsigned long set_rate, + unsigned long ioclk_rate, unsigned long *sample_reg) +{ + unsigned long min_delta = ~0UL; + unsigned short sample_div; + unsigned long ioclk_div = 0; + unsigned long temp_delta; + + for (sample_div = SIRF_USP_MIN_SAMPLE_DIV; + sample_div <= SIRF_MAX_SAMPLE_DIV; sample_div++) { + temp_delta = ioclk_rate - + (ioclk_rate + (set_rate * sample_div) / 2) + / (set_rate * sample_div) * set_rate * sample_div; + + temp_delta = (temp_delta > 0) ? temp_delta : -temp_delta; + if (temp_delta < min_delta) { + ioclk_div = (2 * ioclk_rate / + (set_rate * sample_div) + 1) / 2 - 1; + if (ioclk_div > SIRF_IOCLK_DIV_MAX) + continue; + min_delta = temp_delta; + *sample_reg = sample_div; + if (!temp_delta) + break; + } + } + return ioclk_div; +} + +static unsigned int +sirfsoc_uart_calc_sample_div(unsigned long baud_rate, + unsigned long ioclk_rate, unsigned long *set_baud) +{ + unsigned long min_delta = ~0UL; + unsigned short sample_div; + unsigned int regv = 0; + unsigned long ioclk_div; + unsigned long baud_tmp; + int temp_delta; + + for (sample_div = SIRF_MIN_SAMPLE_DIV; + sample_div <= SIRF_MAX_SAMPLE_DIV; sample_div++) { + ioclk_div = (ioclk_rate / (baud_rate * (sample_div + 1))) - 1; + if (ioclk_div > SIRF_IOCLK_DIV_MAX) + continue; + baud_tmp = ioclk_rate / ((ioclk_div + 1) * (sample_div + 1)); + temp_delta = baud_tmp - baud_rate; + temp_delta = (temp_delta > 0) ? temp_delta : -temp_delta; + if (temp_delta < min_delta) { + regv = regv & (~SIRF_IOCLK_DIV_MASK); + regv = regv | ioclk_div; + regv = regv & (~SIRF_SAMPLE_DIV_MASK); + regv = regv | (sample_div << SIRF_SAMPLE_DIV_SHIFT); + min_delta = temp_delta; + *set_baud = baud_tmp; + } + } + return regv; +} + +static void sirfsoc_uart_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + struct sirfsoc_uart_port *sirfport = to_sirfport(port); + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; + struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; + unsigned long config_reg = 0; + unsigned long baud_rate; + unsigned long set_baud; + unsigned long flags; + unsigned long ic; + unsigned int clk_div_reg = 0; + unsigned long txfifo_op_reg, ioclk_rate; + unsigned long rx_time_out; + int threshold_div; + u32 data_bit_len, stop_bit_len, len_val; + unsigned long sample_div_reg = 0xf; + ioclk_rate = port->uartclk; + + switch (termios->c_cflag & CSIZE) { + default: + case CS8: + data_bit_len = 8; + config_reg |= SIRFUART_DATA_BIT_LEN_8; + break; + case CS7: + data_bit_len = 7; + config_reg |= SIRFUART_DATA_BIT_LEN_7; + break; + case CS6: + data_bit_len = 6; + config_reg |= SIRFUART_DATA_BIT_LEN_6; + break; + case CS5: + data_bit_len = 5; + config_reg |= SIRFUART_DATA_BIT_LEN_5; + break; + } + if (termios->c_cflag & CSTOPB) { + config_reg |= SIRFUART_STOP_BIT_LEN_2; + stop_bit_len = 2; + } else + stop_bit_len = 1; + + spin_lock_irqsave(&port->lock, flags); + port->read_status_mask = uint_en->sirfsoc_rx_oflow_en; + port->ignore_status_mask = 0; + if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) { + if (termios->c_iflag & INPCK) + port->read_status_mask |= uint_en->sirfsoc_frm_err_en | + uint_en->sirfsoc_parity_err_en; + } else { + if (termios->c_iflag & INPCK) + port->read_status_mask |= uint_en->sirfsoc_frm_err_en; + } + if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) + port->read_status_mask |= uint_en->sirfsoc_rxd_brk_en; + if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) { + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= + uint_en->sirfsoc_frm_err_en | + uint_en->sirfsoc_parity_err_en; + if (termios->c_cflag & PARENB) { + if (termios->c_cflag & CMSPAR) { + if (termios->c_cflag & PARODD) + config_reg |= SIRFUART_STICK_BIT_MARK; + else + config_reg |= SIRFUART_STICK_BIT_SPACE; + } else { + if (termios->c_cflag & PARODD) + config_reg |= SIRFUART_STICK_BIT_ODD; + else + config_reg |= SIRFUART_STICK_BIT_EVEN; + } + } + } else { + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= + uint_en->sirfsoc_frm_err_en; + if (termios->c_cflag & PARENB) + dev_warn(port->dev, + "USP-UART not support parity err\n"); + } + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= + uint_en->sirfsoc_rxd_brk_en; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= + uint_en->sirfsoc_rx_oflow_en; + } + if ((termios->c_cflag & CREAD) == 0) + port->ignore_status_mask |= SIRFUART_DUMMY_READ; + /* Hardware Flow Control Settings */ + if (UART_ENABLE_MS(port, termios->c_cflag)) { + if (!sirfport->ms_enabled) + sirfsoc_uart_enable_ms(port); + } else { + if (sirfport->ms_enabled) + sirfsoc_uart_disable_ms(port); + } + baud_rate = uart_get_baud_rate(port, termios, old, 0, 4000000); + if (ioclk_rate == 150000000) { + for (ic = 0; ic < SIRF_BAUD_RATE_SUPPORT_NR; ic++) + if (baud_rate == baudrate_to_regv[ic].baud_rate) + clk_div_reg = baudrate_to_regv[ic].reg_val; + } + set_baud = baud_rate; + if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) { + if (unlikely(clk_div_reg == 0)) + clk_div_reg = sirfsoc_uart_calc_sample_div(baud_rate, + ioclk_rate, &set_baud); + wr_regl(port, ureg->sirfsoc_divisor, clk_div_reg); + } else { + clk_div_reg = sirfsoc_usp_calc_sample_div(baud_rate, + ioclk_rate, &sample_div_reg); + sample_div_reg--; + set_baud = ((ioclk_rate / (clk_div_reg+1) - 1) / + (sample_div_reg + 1)); + /* setting usp mode 2 */ + len_val = ((1 << SIRFSOC_USP_MODE2_RXD_DELAY_OFFSET) | + (1 << SIRFSOC_USP_MODE2_TXD_DELAY_OFFSET)); + len_val |= ((clk_div_reg & SIRFSOC_USP_MODE2_CLK_DIVISOR_MASK) + << SIRFSOC_USP_MODE2_CLK_DIVISOR_OFFSET); + wr_regl(port, ureg->sirfsoc_mode2, len_val); + } + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, set_baud, set_baud); + /* set receive timeout && data bits len */ + rx_time_out = SIRFSOC_UART_RX_TIMEOUT(set_baud, 20000); + rx_time_out = SIRFUART_RECV_TIMEOUT_VALUE(rx_time_out); + txfifo_op_reg = rd_regl(port, ureg->sirfsoc_tx_fifo_op); + wr_regl(port, ureg->sirfsoc_tx_fifo_op, + (txfifo_op_reg & ~SIRFUART_FIFO_START)); + if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) { + config_reg |= SIRFUART_UART_RECV_TIMEOUT(rx_time_out); + wr_regl(port, ureg->sirfsoc_line_ctrl, config_reg); + } else { + /*tx frame ctrl*/ + len_val = (data_bit_len - 1) << SIRFSOC_USP_TX_DATA_LEN_OFFSET; + len_val |= (data_bit_len + 1 + stop_bit_len - 1) << + SIRFSOC_USP_TX_FRAME_LEN_OFFSET; + len_val |= ((data_bit_len - 1) << + SIRFSOC_USP_TX_SHIFTER_LEN_OFFSET); + len_val |= (((clk_div_reg & 0xc00) >> 10) << + SIRFSOC_USP_TX_CLK_DIVISOR_OFFSET); + wr_regl(port, ureg->sirfsoc_tx_frame_ctrl, len_val); + /*rx frame ctrl*/ + len_val = (data_bit_len - 1) << SIRFSOC_USP_RX_DATA_LEN_OFFSET; + len_val |= (data_bit_len + 1 + stop_bit_len - 1) << + SIRFSOC_USP_RX_FRAME_LEN_OFFSET; + len_val |= (data_bit_len - 1) << + SIRFSOC_USP_RX_SHIFTER_LEN_OFFSET; + len_val |= (((clk_div_reg & 0xf000) >> 12) << + SIRFSOC_USP_RX_CLK_DIVISOR_OFFSET); + wr_regl(port, ureg->sirfsoc_rx_frame_ctrl, len_val); + /*async param*/ + wr_regl(port, ureg->sirfsoc_async_param_reg, + (SIRFUART_USP_RECV_TIMEOUT(rx_time_out)) | + (sample_div_reg & SIRFSOC_USP_ASYNC_DIV2_MASK) << + SIRFSOC_USP_ASYNC_DIV2_OFFSET); + } + if (sirfport->tx_dma_chan) + wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl, SIRFUART_DMA_MODE); + else + wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl, SIRFUART_IO_MODE); + if (sirfport->rx_dma_chan) + wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, + rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) & + ~SIRFUART_IO_MODE); + else + wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, + rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) | + SIRFUART_IO_MODE); + sirfport->rx_period_time = 20000000; + /* Reset Rx/Tx FIFO Threshold level for proper baudrate */ + if (set_baud < 1000000) + threshold_div = 1; + else + threshold_div = 2; + wr_regl(port, ureg->sirfsoc_tx_fifo_ctrl, + SIRFUART_FIFO_THD(port) / threshold_div); + wr_regl(port, ureg->sirfsoc_rx_fifo_ctrl, + SIRFUART_FIFO_THD(port) / threshold_div); + txfifo_op_reg |= SIRFUART_FIFO_START; + wr_regl(port, ureg->sirfsoc_tx_fifo_op, txfifo_op_reg); + uart_update_timeout(port, termios->c_cflag, set_baud); + wr_regl(port, ureg->sirfsoc_tx_rx_en, SIRFUART_TX_EN | SIRFUART_RX_EN); + spin_unlock_irqrestore(&port->lock, flags); +} + +static void sirfsoc_uart_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct sirfsoc_uart_port *sirfport = to_sirfport(port); + if (!state) + clk_prepare_enable(sirfport->clk); + else + clk_disable_unprepare(sirfport->clk); +} + +static int sirfsoc_uart_startup(struct uart_port *port) +{ + struct sirfsoc_uart_port *sirfport = to_sirfport(port); + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; + struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; + unsigned int index = port->line; + int ret; + irq_modify_status(port->irq, IRQ_NOREQUEST, IRQ_NOAUTOEN); + ret = request_irq(port->irq, + sirfsoc_uart_isr, + 0, + SIRFUART_PORT_NAME, + sirfport); + if (ret != 0) { + dev_err(port->dev, "UART%d request IRQ line (%d) failed.\n", + index, port->irq); + goto irq_err; + } + /* initial hardware settings */ + wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl, + rd_regl(port, ureg->sirfsoc_tx_dma_io_ctrl) | + SIRFUART_IO_MODE); + wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, + rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) | + SIRFUART_IO_MODE); + wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, + rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) & + ~SIRFUART_RX_DMA_FLUSH); + wr_regl(port, ureg->sirfsoc_tx_dma_io_len, 0); + wr_regl(port, ureg->sirfsoc_rx_dma_io_len, 0); + wr_regl(port, ureg->sirfsoc_tx_rx_en, SIRFUART_RX_EN | SIRFUART_TX_EN); + if (sirfport->uart_reg->uart_type == SIRF_USP_UART) + wr_regl(port, ureg->sirfsoc_mode1, + SIRFSOC_USP_ENDIAN_CTRL_LSBF | + SIRFSOC_USP_EN); + wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_RESET); + wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_RESET); + wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0); + wr_regl(port, ureg->sirfsoc_tx_fifo_ctrl, SIRFUART_FIFO_THD(port)); + wr_regl(port, ureg->sirfsoc_rx_fifo_ctrl, SIRFUART_FIFO_THD(port)); + if (sirfport->rx_dma_chan) + wr_regl(port, ureg->sirfsoc_rx_fifo_level_chk, + SIRFUART_RX_FIFO_CHK_SC(port->line, 0x1) | + SIRFUART_RX_FIFO_CHK_LC(port->line, 0x2) | + SIRFUART_RX_FIFO_CHK_HC(port->line, 0x4)); + if (sirfport->tx_dma_chan) { + sirfport->tx_dma_state = TX_DMA_IDLE; + wr_regl(port, ureg->sirfsoc_tx_fifo_level_chk, + SIRFUART_TX_FIFO_CHK_SC(port->line, 0x1b) | + SIRFUART_TX_FIFO_CHK_LC(port->line, 0xe) | + SIRFUART_TX_FIFO_CHK_HC(port->line, 0x4)); + } + sirfport->ms_enabled = false; + if (sirfport->uart_reg->uart_type == SIRF_USP_UART && + sirfport->hw_flow_ctrl) { + irq_modify_status(gpio_to_irq(sirfport->cts_gpio), + IRQ_NOREQUEST, IRQ_NOAUTOEN); + ret = request_irq(gpio_to_irq(sirfport->cts_gpio), + sirfsoc_uart_usp_cts_handler, IRQF_TRIGGER_FALLING | + IRQF_TRIGGER_RISING, "usp_cts_irq", sirfport); + if (ret != 0) { + dev_err(port->dev, "UART-USP:request gpio irq fail\n"); + goto init_rx_err; + } + } + if (sirfport->uart_reg->uart_type == SIRF_REAL_UART && + sirfport->rx_dma_chan) + wr_regl(port, ureg->sirfsoc_swh_dma_io, + SIRFUART_CLEAR_RX_ADDR_EN); + if (sirfport->uart_reg->uart_type == SIRF_USP_UART && + sirfport->rx_dma_chan) + wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, + rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) | + SIRFSOC_USP_FRADDR_CLR_EN); + if (sirfport->rx_dma_chan && !sirfport->is_hrt_enabled) { + sirfport->is_hrt_enabled = true; + sirfport->rx_period_time = 20000000; + sirfport->rx_last_pos = -1; + sirfport->pio_fetch_cnt = 0; + sirfport->rx_dma_items.xmit.tail = + sirfport->rx_dma_items.xmit.head = 0; + hrtimer_start(&sirfport->hrt, + ns_to_ktime(sirfport->rx_period_time), + HRTIMER_MODE_REL); + } + wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_START); + if (sirfport->rx_dma_chan) + sirfsoc_uart_start_next_rx_dma(port); + else { + if (!sirfport->is_atlas7) + wr_regl(port, ureg->sirfsoc_int_en_reg, + rd_regl(port, ureg->sirfsoc_int_en_reg) | + SIRFUART_RX_IO_INT_EN(uint_en, + sirfport->uart_reg->uart_type)); + else + wr_regl(port, ureg->sirfsoc_int_en_reg, + SIRFUART_RX_IO_INT_EN(uint_en, + sirfport->uart_reg->uart_type)); + } + enable_irq(port->irq); + + return 0; +init_rx_err: + free_irq(port->irq, sirfport); +irq_err: + return ret; +} + +static void sirfsoc_uart_shutdown(struct uart_port *port) +{ + struct sirfsoc_uart_port *sirfport = to_sirfport(port); + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; + struct circ_buf *xmit; + + xmit = &sirfport->rx_dma_items.xmit; + if (!sirfport->is_atlas7) + wr_regl(port, ureg->sirfsoc_int_en_reg, 0); + else + wr_regl(port, ureg->sirfsoc_int_en_clr_reg, ~0UL); + + free_irq(port->irq, sirfport); + if (sirfport->ms_enabled) + sirfsoc_uart_disable_ms(port); + if (sirfport->uart_reg->uart_type == SIRF_USP_UART && + sirfport->hw_flow_ctrl) { + gpio_set_value(sirfport->rts_gpio, 1); + free_irq(gpio_to_irq(sirfport->cts_gpio), sirfport); + } + if (sirfport->tx_dma_chan) + sirfport->tx_dma_state = TX_DMA_IDLE; + if (sirfport->rx_dma_chan && sirfport->is_hrt_enabled) { + while (((rd_regl(port, ureg->sirfsoc_rx_fifo_status) & + SIRFUART_RX_FIFO_MASK) > sirfport->pio_fetch_cnt) && + !CIRC_CNT(xmit->head, xmit->tail, + SIRFSOC_RX_DMA_BUF_SIZE)) + ; + sirfport->is_hrt_enabled = false; + hrtimer_cancel(&sirfport->hrt); + } +} + +static const char *sirfsoc_uart_type(struct uart_port *port) +{ + return port->type == SIRFSOC_PORT_TYPE ? SIRFUART_PORT_NAME : NULL; +} + +static int sirfsoc_uart_request_port(struct uart_port *port) +{ + struct sirfsoc_uart_port *sirfport = to_sirfport(port); + struct sirfsoc_uart_param *uart_param = &sirfport->uart_reg->uart_param; + void *ret; + ret = request_mem_region(port->mapbase, + SIRFUART_MAP_SIZE, uart_param->port_name); + return ret ? 0 : -EBUSY; +} + +static void sirfsoc_uart_release_port(struct uart_port *port) +{ + release_mem_region(port->mapbase, SIRFUART_MAP_SIZE); +} + +static void sirfsoc_uart_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = SIRFSOC_PORT_TYPE; + sirfsoc_uart_request_port(port); + } +} + +static const struct uart_ops sirfsoc_uart_ops = { + .tx_empty = sirfsoc_uart_tx_empty, + .get_mctrl = sirfsoc_uart_get_mctrl, + .set_mctrl = sirfsoc_uart_set_mctrl, + .stop_tx = sirfsoc_uart_stop_tx, + .start_tx = sirfsoc_uart_start_tx, + .stop_rx = sirfsoc_uart_stop_rx, + .enable_ms = sirfsoc_uart_enable_ms, + .break_ctl = sirfsoc_uart_break_ctl, + .startup = sirfsoc_uart_startup, + .shutdown = sirfsoc_uart_shutdown, + .set_termios = sirfsoc_uart_set_termios, + .pm = sirfsoc_uart_pm, + .type = sirfsoc_uart_type, + .release_port = sirfsoc_uart_release_port, + .request_port = sirfsoc_uart_request_port, + .config_port = sirfsoc_uart_config_port, +}; + +#ifdef CONFIG_SERIAL_SIRFSOC_CONSOLE +static int __init +sirfsoc_uart_console_setup(struct console *co, char *options) +{ + unsigned int baud = 115200; + unsigned int bits = 8; + unsigned int parity = 'n'; + unsigned int flow = 'n'; + struct sirfsoc_uart_port *sirfport; + struct sirfsoc_register *ureg; + if (co->index < 0 || co->index >= SIRFSOC_UART_NR) + co->index = 1; + sirfport = sirf_ports[co->index]; + if (!sirfport) + return -ENODEV; + ureg = &sirfport->uart_reg->uart_reg; + if (!sirfport->port.mapbase) + return -ENODEV; + + /* enable usp in mode1 register */ + if (sirfport->uart_reg->uart_type == SIRF_USP_UART) + wr_regl(&sirfport->port, ureg->sirfsoc_mode1, SIRFSOC_USP_EN | + SIRFSOC_USP_ENDIAN_CTRL_LSBF); + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + sirfport->port.cons = co; + + /* default console tx/rx transfer using io mode */ + sirfport->rx_dma_chan = NULL; + sirfport->tx_dma_chan = NULL; + return uart_set_options(&sirfport->port, co, baud, parity, bits, flow); +} + +static void sirfsoc_uart_console_putchar(struct uart_port *port, int ch) +{ + struct sirfsoc_uart_port *sirfport = to_sirfport(port); + struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; + struct sirfsoc_fifo_status *ufifo_st = &sirfport->uart_reg->fifo_status; + while (rd_regl(port, ureg->sirfsoc_tx_fifo_status) & + ufifo_st->ff_full(port)) + cpu_relax(); + wr_regl(port, ureg->sirfsoc_tx_fifo_data, ch); +} + +static void sirfsoc_uart_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct sirfsoc_uart_port *sirfport = sirf_ports[co->index]; + + uart_console_write(&sirfport->port, s, count, + sirfsoc_uart_console_putchar); +} + +static struct console sirfsoc_uart_console = { + .name = SIRFSOC_UART_NAME, + .device = uart_console_device, + .flags = CON_PRINTBUFFER, + .index = -1, + .write = sirfsoc_uart_console_write, + .setup = sirfsoc_uart_console_setup, + .data = &sirfsoc_uart_drv, +}; + +static int __init sirfsoc_uart_console_init(void) +{ + register_console(&sirfsoc_uart_console); + return 0; +} +console_initcall(sirfsoc_uart_console_init); +#endif + +static struct uart_driver sirfsoc_uart_drv = { + .owner = THIS_MODULE, + .driver_name = SIRFUART_PORT_NAME, + .nr = SIRFSOC_UART_NR, + .dev_name = SIRFSOC_UART_NAME, + .major = SIRFSOC_UART_MAJOR, + .minor = SIRFSOC_UART_MINOR, +#ifdef CONFIG_SERIAL_SIRFSOC_CONSOLE + .cons = &sirfsoc_uart_console, +#else + .cons = NULL, +#endif +}; + +static enum hrtimer_restart + sirfsoc_uart_rx_dma_hrtimer_callback(struct hrtimer *hrt) +{ + struct sirfsoc_uart_port *sirfport; + struct uart_port *port; + int count, inserted; + struct dma_tx_state tx_state; + struct tty_struct *tty; + struct sirfsoc_register *ureg; + struct circ_buf *xmit; + struct sirfsoc_fifo_status *ufifo_st; + int max_pio_cnt; + + sirfport = container_of(hrt, struct sirfsoc_uart_port, hrt); + port = &sirfport->port; + inserted = 0; + tty = port->state->port.tty; + ureg = &sirfport->uart_reg->uart_reg; + xmit = &sirfport->rx_dma_items.xmit; + ufifo_st = &sirfport->uart_reg->fifo_status; + + dmaengine_tx_status(sirfport->rx_dma_chan, + sirfport->rx_dma_items.cookie, &tx_state); + if (SIRFSOC_RX_DMA_BUF_SIZE - tx_state.residue != + sirfport->rx_last_pos) { + xmit->head = SIRFSOC_RX_DMA_BUF_SIZE - tx_state.residue; + sirfport->rx_last_pos = xmit->head; + sirfport->pio_fetch_cnt = 0; + } + count = CIRC_CNT_TO_END(xmit->head, xmit->tail, + SIRFSOC_RX_DMA_BUF_SIZE); + while (count > 0) { + inserted = tty_insert_flip_string(tty->port, + (const unsigned char *)&xmit->buf[xmit->tail], count); + if (!inserted) + goto next_hrt; + port->icount.rx += inserted; + xmit->tail = (xmit->tail + inserted) & + (SIRFSOC_RX_DMA_BUF_SIZE - 1); + count = CIRC_CNT_TO_END(xmit->head, xmit->tail, + SIRFSOC_RX_DMA_BUF_SIZE); + tty_flip_buffer_push(tty->port); + } + /* + * if RX DMA buffer data have all push into tty buffer, and there is + * only little data(less than a dma transfer unit) left in rxfifo, + * fetch it out in pio mode and switch back to dma immediately + */ + if (!inserted && !count && + ((rd_regl(port, ureg->sirfsoc_rx_fifo_status) & + SIRFUART_RX_FIFO_MASK) > sirfport->pio_fetch_cnt)) { + dmaengine_pause(sirfport->rx_dma_chan); + /* switch to pio mode */ + wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, + rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) | + SIRFUART_IO_MODE); + /* + * UART controller SWH_DMA_IO register have CLEAR_RX_ADDR_EN + * When found changing I/O to DMA mode, it clears + * two low bits of read point; + * USP have similar FRADDR_CLR_EN bit in USP_RX_DMA_IO_CTRL. + * Fetch data out from rxfifo into DMA buffer in PIO mode, + * while switch back to DMA mode, the data fetched will override + * by DMA, as hardware have a strange behaviour: + * after switch back to DMA mode, check rxfifo status it will + * be the number PIO fetched, so record the fetched data count + * to avoid the repeated fetch + */ + max_pio_cnt = 3; + while (!(rd_regl(port, ureg->sirfsoc_rx_fifo_status) & + ufifo_st->ff_empty(port)) && max_pio_cnt--) { + xmit->buf[xmit->head] = + rd_regl(port, ureg->sirfsoc_rx_fifo_data); + xmit->head = (xmit->head + 1) & + (SIRFSOC_RX_DMA_BUF_SIZE - 1); + sirfport->pio_fetch_cnt++; + } + /* switch back to dma mode */ + wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, + rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) & + ~SIRFUART_IO_MODE); + dmaengine_resume(sirfport->rx_dma_chan); + } +next_hrt: + hrtimer_forward_now(hrt, ns_to_ktime(sirfport->rx_period_time)); + return HRTIMER_RESTART; +} + +static const struct of_device_id sirfsoc_uart_ids[] = { + { .compatible = "sirf,prima2-uart", .data = &sirfsoc_uart,}, + { .compatible = "sirf,atlas7-uart", .data = &sirfsoc_uart}, + { .compatible = "sirf,prima2-usp-uart", .data = &sirfsoc_usp}, + { .compatible = "sirf,atlas7-usp-uart", .data = &sirfsoc_usp}, + {} +}; +MODULE_DEVICE_TABLE(of, sirfsoc_uart_ids); + +static int sirfsoc_uart_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct sirfsoc_uart_port *sirfport; + struct uart_port *port; + struct resource *res; + int ret; + struct dma_slave_config slv_cfg = { + .src_maxburst = 1, + }; + struct dma_slave_config tx_slv_cfg = { + .dst_maxburst = 2, + }; + const struct of_device_id *match; + + match = of_match_node(sirfsoc_uart_ids, np); + sirfport = devm_kzalloc(&pdev->dev, sizeof(*sirfport), GFP_KERNEL); + if (!sirfport) { + ret = -ENOMEM; + goto err; + } + sirfport->port.line = of_alias_get_id(np, "serial"); + if (sirfport->port.line >= ARRAY_SIZE(sirf_ports)) { + dev_err(&pdev->dev, "serial%d out of range\n", + sirfport->port.line); + return -EINVAL; + } + sirf_ports[sirfport->port.line] = sirfport; + sirfport->port.iotype = UPIO_MEM; + sirfport->port.flags = UPF_BOOT_AUTOCONF; + port = &sirfport->port; + port->dev = &pdev->dev; + port->private_data = sirfport; + sirfport->uart_reg = (struct sirfsoc_uart_register *)match->data; + + sirfport->hw_flow_ctrl = + of_property_read_bool(np, "uart-has-rtscts") || + of_property_read_bool(np, "sirf,uart-has-rtscts") /* deprecated */; + if (of_device_is_compatible(np, "sirf,prima2-uart") || + of_device_is_compatible(np, "sirf,atlas7-uart")) + sirfport->uart_reg->uart_type = SIRF_REAL_UART; + if (of_device_is_compatible(np, "sirf,prima2-usp-uart") || + of_device_is_compatible(np, "sirf,atlas7-usp-uart")) { + sirfport->uart_reg->uart_type = SIRF_USP_UART; + if (!sirfport->hw_flow_ctrl) + goto usp_no_flow_control; + if (of_find_property(np, "cts-gpios", NULL)) + sirfport->cts_gpio = + of_get_named_gpio(np, "cts-gpios", 0); + else + sirfport->cts_gpio = -1; + if (of_find_property(np, "rts-gpios", NULL)) + sirfport->rts_gpio = + of_get_named_gpio(np, "rts-gpios", 0); + else + sirfport->rts_gpio = -1; + + if ((!gpio_is_valid(sirfport->cts_gpio) || + !gpio_is_valid(sirfport->rts_gpio))) { + ret = -EINVAL; + dev_err(&pdev->dev, + "Usp flow control must have cts and rts gpio"); + goto err; + } + ret = devm_gpio_request(&pdev->dev, sirfport->cts_gpio, + "usp-cts-gpio"); + if (ret) { + dev_err(&pdev->dev, "Unable request cts gpio"); + goto err; + } + gpio_direction_input(sirfport->cts_gpio); + ret = devm_gpio_request(&pdev->dev, sirfport->rts_gpio, + "usp-rts-gpio"); + if (ret) { + dev_err(&pdev->dev, "Unable request rts gpio"); + goto err; + } + gpio_direction_output(sirfport->rts_gpio, 1); + } +usp_no_flow_control: + if (of_device_is_compatible(np, "sirf,atlas7-uart") || + of_device_is_compatible(np, "sirf,atlas7-usp-uart")) + sirfport->is_atlas7 = true; + + if (of_property_read_u32(np, "fifosize", &port->fifosize)) { + dev_err(&pdev->dev, + "Unable to find fifosize in uart node.\n"); + ret = -EFAULT; + goto err; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "Insufficient resources.\n"); + ret = -EFAULT; + goto err; + } + port->mapbase = res->start; + port->membase = devm_ioremap(&pdev->dev, + res->start, resource_size(res)); + if (!port->membase) { + dev_err(&pdev->dev, "Cannot remap resource.\n"); + ret = -ENOMEM; + goto err; + } + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (res == NULL) { + dev_err(&pdev->dev, "Insufficient resources.\n"); + ret = -EFAULT; + goto err; + } + port->irq = res->start; + + sirfport->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(sirfport->clk)) { + ret = PTR_ERR(sirfport->clk); + goto err; + } + port->uartclk = clk_get_rate(sirfport->clk); + + port->ops = &sirfsoc_uart_ops; + spin_lock_init(&port->lock); + + platform_set_drvdata(pdev, sirfport); + ret = uart_add_one_port(&sirfsoc_uart_drv, port); + if (ret != 0) { + dev_err(&pdev->dev, "Cannot add UART port(%d).\n", pdev->id); + goto err; + } + + sirfport->rx_dma_chan = dma_request_slave_channel(port->dev, "rx"); + sirfport->rx_dma_items.xmit.buf = + dma_alloc_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE, + &sirfport->rx_dma_items.dma_addr, GFP_KERNEL); + if (!sirfport->rx_dma_items.xmit.buf) { + dev_err(port->dev, "Uart alloc bufa failed\n"); + ret = -ENOMEM; + goto alloc_coherent_err; + } + sirfport->rx_dma_items.xmit.head = + sirfport->rx_dma_items.xmit.tail = 0; + if (sirfport->rx_dma_chan) + dmaengine_slave_config(sirfport->rx_dma_chan, &slv_cfg); + sirfport->tx_dma_chan = dma_request_slave_channel(port->dev, "tx"); + if (sirfport->tx_dma_chan) + dmaengine_slave_config(sirfport->tx_dma_chan, &tx_slv_cfg); + if (sirfport->rx_dma_chan) { + hrtimer_init(&sirfport->hrt, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + sirfport->hrt.function = sirfsoc_uart_rx_dma_hrtimer_callback; + sirfport->is_hrt_enabled = false; + } + + return 0; +alloc_coherent_err: + dma_free_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE, + sirfport->rx_dma_items.xmit.buf, + sirfport->rx_dma_items.dma_addr); + dma_release_channel(sirfport->rx_dma_chan); +err: + return ret; +} + +static int sirfsoc_uart_remove(struct platform_device *pdev) +{ + struct sirfsoc_uart_port *sirfport = platform_get_drvdata(pdev); + struct uart_port *port = &sirfport->port; + uart_remove_one_port(&sirfsoc_uart_drv, port); + if (sirfport->rx_dma_chan) { + dmaengine_terminate_all(sirfport->rx_dma_chan); + dma_release_channel(sirfport->rx_dma_chan); + dma_free_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE, + sirfport->rx_dma_items.xmit.buf, + sirfport->rx_dma_items.dma_addr); + } + if (sirfport->tx_dma_chan) { + dmaengine_terminate_all(sirfport->tx_dma_chan); + dma_release_channel(sirfport->tx_dma_chan); + } + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int +sirfsoc_uart_suspend(struct device *pdev) +{ + struct sirfsoc_uart_port *sirfport = dev_get_drvdata(pdev); + struct uart_port *port = &sirfport->port; + uart_suspend_port(&sirfsoc_uart_drv, port); + return 0; +} + +static int sirfsoc_uart_resume(struct device *pdev) +{ + struct sirfsoc_uart_port *sirfport = dev_get_drvdata(pdev); + struct uart_port *port = &sirfport->port; + uart_resume_port(&sirfsoc_uart_drv, port); + return 0; +} +#endif + +static const struct dev_pm_ops sirfsoc_uart_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(sirfsoc_uart_suspend, sirfsoc_uart_resume) +}; + +static struct platform_driver sirfsoc_uart_driver = { + .probe = sirfsoc_uart_probe, + .remove = sirfsoc_uart_remove, + .driver = { + .name = SIRFUART_PORT_NAME, + .of_match_table = sirfsoc_uart_ids, + .pm = &sirfsoc_uart_pm_ops, + }, +}; + +static int __init sirfsoc_uart_init(void) +{ + int ret = 0; + + ret = uart_register_driver(&sirfsoc_uart_drv); + if (ret) + goto out; + + ret = platform_driver_register(&sirfsoc_uart_driver); + if (ret) + uart_unregister_driver(&sirfsoc_uart_drv); +out: + return ret; +} +module_init(sirfsoc_uart_init); + +static void __exit sirfsoc_uart_exit(void) +{ + platform_driver_unregister(&sirfsoc_uart_driver); + uart_unregister_driver(&sirfsoc_uart_drv); +} +module_exit(sirfsoc_uart_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Bin Shi , Rong Wang"); +MODULE_DESCRIPTION("CSR SiRFprimaII Uart Driver"); diff --git a/drivers/tty/serial/sirfsoc_uart.h b/drivers/tty/serial/sirfsoc_uart.h new file mode 100644 index 000000000..fb88ac565 --- /dev/null +++ b/drivers/tty/serial/sirfsoc_uart.h @@ -0,0 +1,447 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Drivers for CSR SiRFprimaII onboard UARTs. + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + */ +#include +#include +#include +struct sirfsoc_uart_param { + const char *uart_name; + const char *port_name; +}; + +struct sirfsoc_register { + /* hardware uart specific */ + u32 sirfsoc_line_ctrl; + u32 sirfsoc_divisor; + /* uart - usp common */ + u32 sirfsoc_tx_rx_en; + u32 sirfsoc_int_en_reg; + u32 sirfsoc_int_st_reg; + u32 sirfsoc_int_en_clr_reg; + u32 sirfsoc_tx_dma_io_ctrl; + u32 sirfsoc_tx_dma_io_len; + u32 sirfsoc_tx_fifo_ctrl; + u32 sirfsoc_tx_fifo_level_chk; + u32 sirfsoc_tx_fifo_op; + u32 sirfsoc_tx_fifo_status; + u32 sirfsoc_tx_fifo_data; + u32 sirfsoc_rx_dma_io_ctrl; + u32 sirfsoc_rx_dma_io_len; + u32 sirfsoc_rx_fifo_ctrl; + u32 sirfsoc_rx_fifo_level_chk; + u32 sirfsoc_rx_fifo_op; + u32 sirfsoc_rx_fifo_status; + u32 sirfsoc_rx_fifo_data; + u32 sirfsoc_afc_ctrl; + u32 sirfsoc_swh_dma_io; + /* hardware usp specific */ + u32 sirfsoc_mode1; + u32 sirfsoc_mode2; + u32 sirfsoc_tx_frame_ctrl; + u32 sirfsoc_rx_frame_ctrl; + u32 sirfsoc_async_param_reg; +}; + +typedef u32 (*fifo_full_mask)(struct uart_port *port); +typedef u32 (*fifo_empty_mask)(struct uart_port *port); + +struct sirfsoc_fifo_status { + fifo_full_mask ff_full; + fifo_empty_mask ff_empty; +}; + +struct sirfsoc_int_en { + u32 sirfsoc_rx_done_en; + u32 sirfsoc_tx_done_en; + u32 sirfsoc_rx_oflow_en; + u32 sirfsoc_tx_allout_en; + u32 sirfsoc_rx_io_dma_en; + u32 sirfsoc_tx_io_dma_en; + u32 sirfsoc_rxfifo_full_en; + u32 sirfsoc_txfifo_empty_en; + u32 sirfsoc_rxfifo_thd_en; + u32 sirfsoc_txfifo_thd_en; + u32 sirfsoc_frm_err_en; + u32 sirfsoc_rxd_brk_en; + u32 sirfsoc_rx_timeout_en; + u32 sirfsoc_parity_err_en; + u32 sirfsoc_cts_en; + u32 sirfsoc_rts_en; +}; + +struct sirfsoc_int_status { + u32 sirfsoc_rx_done; + u32 sirfsoc_tx_done; + u32 sirfsoc_rx_oflow; + u32 sirfsoc_tx_allout; + u32 sirfsoc_rx_io_dma; + u32 sirfsoc_tx_io_dma; + u32 sirfsoc_rxfifo_full; + u32 sirfsoc_txfifo_empty; + u32 sirfsoc_rxfifo_thd; + u32 sirfsoc_txfifo_thd; + u32 sirfsoc_frm_err; + u32 sirfsoc_rxd_brk; + u32 sirfsoc_rx_timeout; + u32 sirfsoc_parity_err; + u32 sirfsoc_cts; + u32 sirfsoc_rts; +}; + +enum sirfsoc_uart_type { + SIRF_REAL_UART, + SIRF_USP_UART, +}; + +struct sirfsoc_uart_register { + struct sirfsoc_register uart_reg; + struct sirfsoc_int_en uart_int_en; + struct sirfsoc_int_status uart_int_st; + struct sirfsoc_fifo_status fifo_status; + struct sirfsoc_uart_param uart_param; + enum sirfsoc_uart_type uart_type; +}; + +static u32 uart_usp_ff_full_mask(struct uart_port *port) +{ + u32 full_bit; + + full_bit = ilog2(port->fifosize); + return (1 << full_bit); +} + +static u32 uart_usp_ff_empty_mask(struct uart_port *port) +{ + u32 empty_bit; + + empty_bit = ilog2(port->fifosize) + 1; + return (1 << empty_bit); +} + +static struct sirfsoc_uart_register sirfsoc_usp = { + .uart_reg = { + .sirfsoc_mode1 = 0x0000, + .sirfsoc_mode2 = 0x0004, + .sirfsoc_tx_frame_ctrl = 0x0008, + .sirfsoc_rx_frame_ctrl = 0x000c, + .sirfsoc_tx_rx_en = 0x0010, + .sirfsoc_int_en_reg = 0x0014, + .sirfsoc_int_st_reg = 0x0018, + .sirfsoc_async_param_reg = 0x0024, + .sirfsoc_tx_dma_io_ctrl = 0x0100, + .sirfsoc_tx_dma_io_len = 0x0104, + .sirfsoc_tx_fifo_ctrl = 0x0108, + .sirfsoc_tx_fifo_level_chk = 0x010c, + .sirfsoc_tx_fifo_op = 0x0110, + .sirfsoc_tx_fifo_status = 0x0114, + .sirfsoc_tx_fifo_data = 0x0118, + .sirfsoc_rx_dma_io_ctrl = 0x0120, + .sirfsoc_rx_dma_io_len = 0x0124, + .sirfsoc_rx_fifo_ctrl = 0x0128, + .sirfsoc_rx_fifo_level_chk = 0x012c, + .sirfsoc_rx_fifo_op = 0x0130, + .sirfsoc_rx_fifo_status = 0x0134, + .sirfsoc_rx_fifo_data = 0x0138, + .sirfsoc_int_en_clr_reg = 0x140, + }, + .uart_int_en = { + .sirfsoc_rx_done_en = BIT(0), + .sirfsoc_tx_done_en = BIT(1), + .sirfsoc_rx_oflow_en = BIT(2), + .sirfsoc_tx_allout_en = BIT(3), + .sirfsoc_rx_io_dma_en = BIT(4), + .sirfsoc_tx_io_dma_en = BIT(5), + .sirfsoc_rxfifo_full_en = BIT(6), + .sirfsoc_txfifo_empty_en = BIT(7), + .sirfsoc_rxfifo_thd_en = BIT(8), + .sirfsoc_txfifo_thd_en = BIT(9), + .sirfsoc_frm_err_en = BIT(10), + .sirfsoc_rx_timeout_en = BIT(11), + .sirfsoc_rxd_brk_en = BIT(15), + }, + .uart_int_st = { + .sirfsoc_rx_done = BIT(0), + .sirfsoc_tx_done = BIT(1), + .sirfsoc_rx_oflow = BIT(2), + .sirfsoc_tx_allout = BIT(3), + .sirfsoc_rx_io_dma = BIT(4), + .sirfsoc_tx_io_dma = BIT(5), + .sirfsoc_rxfifo_full = BIT(6), + .sirfsoc_txfifo_empty = BIT(7), + .sirfsoc_rxfifo_thd = BIT(8), + .sirfsoc_txfifo_thd = BIT(9), + .sirfsoc_frm_err = BIT(10), + .sirfsoc_rx_timeout = BIT(11), + .sirfsoc_rxd_brk = BIT(15), + }, + .fifo_status = { + .ff_full = uart_usp_ff_full_mask, + .ff_empty = uart_usp_ff_empty_mask, + }, + .uart_param = { + .uart_name = "ttySiRF", + .port_name = "sirfsoc-uart", + }, +}; + +static struct sirfsoc_uart_register sirfsoc_uart = { + .uart_reg = { + .sirfsoc_line_ctrl = 0x0040, + .sirfsoc_tx_rx_en = 0x004c, + .sirfsoc_divisor = 0x0050, + .sirfsoc_int_en_reg = 0x0054, + .sirfsoc_int_st_reg = 0x0058, + .sirfsoc_int_en_clr_reg = 0x0060, + .sirfsoc_tx_dma_io_ctrl = 0x0100, + .sirfsoc_tx_dma_io_len = 0x0104, + .sirfsoc_tx_fifo_ctrl = 0x0108, + .sirfsoc_tx_fifo_level_chk = 0x010c, + .sirfsoc_tx_fifo_op = 0x0110, + .sirfsoc_tx_fifo_status = 0x0114, + .sirfsoc_tx_fifo_data = 0x0118, + .sirfsoc_rx_dma_io_ctrl = 0x0120, + .sirfsoc_rx_dma_io_len = 0x0124, + .sirfsoc_rx_fifo_ctrl = 0x0128, + .sirfsoc_rx_fifo_level_chk = 0x012c, + .sirfsoc_rx_fifo_op = 0x0130, + .sirfsoc_rx_fifo_status = 0x0134, + .sirfsoc_rx_fifo_data = 0x0138, + .sirfsoc_afc_ctrl = 0x0140, + .sirfsoc_swh_dma_io = 0x0148, + }, + .uart_int_en = { + .sirfsoc_rx_done_en = BIT(0), + .sirfsoc_tx_done_en = BIT(1), + .sirfsoc_rx_oflow_en = BIT(2), + .sirfsoc_tx_allout_en = BIT(3), + .sirfsoc_rx_io_dma_en = BIT(4), + .sirfsoc_tx_io_dma_en = BIT(5), + .sirfsoc_rxfifo_full_en = BIT(6), + .sirfsoc_txfifo_empty_en = BIT(7), + .sirfsoc_rxfifo_thd_en = BIT(8), + .sirfsoc_txfifo_thd_en = BIT(9), + .sirfsoc_frm_err_en = BIT(10), + .sirfsoc_rxd_brk_en = BIT(11), + .sirfsoc_rx_timeout_en = BIT(12), + .sirfsoc_parity_err_en = BIT(13), + .sirfsoc_cts_en = BIT(14), + .sirfsoc_rts_en = BIT(15), + }, + .uart_int_st = { + .sirfsoc_rx_done = BIT(0), + .sirfsoc_tx_done = BIT(1), + .sirfsoc_rx_oflow = BIT(2), + .sirfsoc_tx_allout = BIT(3), + .sirfsoc_rx_io_dma = BIT(4), + .sirfsoc_tx_io_dma = BIT(5), + .sirfsoc_rxfifo_full = BIT(6), + .sirfsoc_txfifo_empty = BIT(7), + .sirfsoc_rxfifo_thd = BIT(8), + .sirfsoc_txfifo_thd = BIT(9), + .sirfsoc_frm_err = BIT(10), + .sirfsoc_rxd_brk = BIT(11), + .sirfsoc_rx_timeout = BIT(12), + .sirfsoc_parity_err = BIT(13), + .sirfsoc_cts = BIT(14), + .sirfsoc_rts = BIT(15), + }, + .fifo_status = { + .ff_full = uart_usp_ff_full_mask, + .ff_empty = uart_usp_ff_empty_mask, + }, + .uart_param = { + .uart_name = "ttySiRF", + .port_name = "sirfsoc_uart", + }, +}; +/* uart io ctrl */ +#define SIRFUART_DATA_BIT_LEN_MASK 0x3 +#define SIRFUART_DATA_BIT_LEN_5 BIT(0) +#define SIRFUART_DATA_BIT_LEN_6 1 +#define SIRFUART_DATA_BIT_LEN_7 2 +#define SIRFUART_DATA_BIT_LEN_8 3 +#define SIRFUART_STOP_BIT_LEN_1 0 +#define SIRFUART_STOP_BIT_LEN_2 BIT(2) +#define SIRFUART_PARITY_EN BIT(3) +#define SIRFUART_EVEN_BIT BIT(4) +#define SIRFUART_STICK_BIT_MASK (7 << 3) +#define SIRFUART_STICK_BIT_NONE (0 << 3) +#define SIRFUART_STICK_BIT_EVEN BIT(3) +#define SIRFUART_STICK_BIT_ODD (3 << 3) +#define SIRFUART_STICK_BIT_MARK (5 << 3) +#define SIRFUART_STICK_BIT_SPACE (7 << 3) +#define SIRFUART_SET_BREAK BIT(6) +#define SIRFUART_LOOP_BACK BIT(7) +#define SIRFUART_PARITY_MASK (7 << 3) +#define SIRFUART_DUMMY_READ BIT(16) +#define SIRFUART_AFC_CTRL_RX_THD 0x70 +#define SIRFUART_AFC_RX_EN BIT(8) +#define SIRFUART_AFC_TX_EN BIT(9) +#define SIRFUART_AFC_CTS_CTRL BIT(10) +#define SIRFUART_AFC_RTS_CTRL BIT(11) +#define SIRFUART_AFC_CTS_STATUS BIT(12) +#define SIRFUART_AFC_RTS_STATUS BIT(13) +/* UART FIFO Register */ +#define SIRFUART_FIFO_STOP 0x0 +#define SIRFUART_FIFO_RESET BIT(0) +#define SIRFUART_FIFO_START BIT(1) + +#define SIRFUART_RX_EN BIT(0) +#define SIRFUART_TX_EN BIT(1) + +#define SIRFUART_IO_MODE BIT(0) +#define SIRFUART_DMA_MODE 0x0 +#define SIRFUART_RX_DMA_FLUSH 0x4 + +#define SIRFUART_CLEAR_RX_ADDR_EN 0x2 +/* Baud Rate Calculation */ +#define SIRF_USP_MIN_SAMPLE_DIV 0x1 +#define SIRF_MIN_SAMPLE_DIV 0xf +#define SIRF_MAX_SAMPLE_DIV 0x3f +#define SIRF_IOCLK_DIV_MAX 0xffff +#define SIRF_SAMPLE_DIV_SHIFT 16 +#define SIRF_IOCLK_DIV_MASK 0xffff +#define SIRF_SAMPLE_DIV_MASK 0x3f0000 +#define SIRF_BAUD_RATE_SUPPORT_NR 18 + +/* USP SPEC */ +#define SIRFSOC_USP_ENDIAN_CTRL_LSBF BIT(4) +#define SIRFSOC_USP_EN BIT(5) +#define SIRFSOC_USP_MODE2_RXD_DELAY_OFFSET 0 +#define SIRFSOC_USP_MODE2_TXD_DELAY_OFFSET 8 +#define SIRFSOC_USP_MODE2_CLK_DIVISOR_MASK 0x3ff +#define SIRFSOC_USP_MODE2_CLK_DIVISOR_OFFSET 21 +#define SIRFSOC_USP_TX_DATA_LEN_OFFSET 0 +#define SIRFSOC_USP_TX_SYNC_LEN_OFFSET 8 +#define SIRFSOC_USP_TX_FRAME_LEN_OFFSET 16 +#define SIRFSOC_USP_TX_SHIFTER_LEN_OFFSET 24 +#define SIRFSOC_USP_TX_CLK_DIVISOR_OFFSET 30 +#define SIRFSOC_USP_RX_DATA_LEN_OFFSET 0 +#define SIRFSOC_USP_RX_FRAME_LEN_OFFSET 8 +#define SIRFSOC_USP_RX_SHIFTER_LEN_OFFSET 16 +#define SIRFSOC_USP_RX_CLK_DIVISOR_OFFSET 24 +#define SIRFSOC_USP_ASYNC_DIV2_MASK 0x3f +#define SIRFSOC_USP_ASYNC_DIV2_OFFSET 16 +#define SIRFSOC_USP_LOOP_BACK_CTRL BIT(2) +#define SIRFSOC_USP_FRADDR_CLR_EN BIT(1) +/* USP-UART Common */ +#define SIRFSOC_UART_RX_TIMEOUT(br, to) (((br) * (((to) + 999) / 1000)) / 1000) +#define SIRFUART_RECV_TIMEOUT_VALUE(x) \ + (((x) > 0xFFFF) ? 0xFFFF : ((x) & 0xFFFF)) +#define SIRFUART_USP_RECV_TIMEOUT(x) (x & 0xFFFF) +#define SIRFUART_UART_RECV_TIMEOUT(x) ((x & 0xFFFF) << 16) + +#define SIRFUART_FIFO_THD(port) (port->fifosize >> 1) +#define SIRFUART_ERR_INT_STAT(unit_st, uart_type) \ + (uint_st->sirfsoc_rx_oflow | \ + uint_st->sirfsoc_frm_err | \ + uint_st->sirfsoc_rxd_brk | \ + ((uart_type != SIRF_REAL_UART) ? \ + 0 : uint_st->sirfsoc_parity_err)) +#define SIRFUART_RX_IO_INT_EN(uint_en, uart_type) \ + (uint_en->sirfsoc_rx_done_en |\ + uint_en->sirfsoc_rxfifo_thd_en |\ + uint_en->sirfsoc_rxfifo_full_en |\ + uint_en->sirfsoc_frm_err_en |\ + uint_en->sirfsoc_rx_oflow_en |\ + uint_en->sirfsoc_rxd_brk_en |\ + ((uart_type != SIRF_REAL_UART) ? \ + 0 : uint_en->sirfsoc_parity_err_en)) +#define SIRFUART_RX_IO_INT_ST(uint_st) \ + (uint_st->sirfsoc_rxfifo_thd |\ + uint_st->sirfsoc_rxfifo_full|\ + uint_st->sirfsoc_rx_done |\ + uint_st->sirfsoc_rx_timeout) +#define SIRFUART_CTS_INT_ST(uint_st) (uint_st->sirfsoc_cts) +#define SIRFUART_RX_DMA_INT_EN(uint_en, uart_type) \ + (uint_en->sirfsoc_frm_err_en |\ + uint_en->sirfsoc_rx_oflow_en |\ + uint_en->sirfsoc_rxd_brk_en |\ + ((uart_type != SIRF_REAL_UART) ? \ + 0 : uint_en->sirfsoc_parity_err_en)) +/* Generic Definitions */ +#define SIRFSOC_UART_NAME "ttySiRF" +#define SIRFSOC_UART_MAJOR 0 +#define SIRFSOC_UART_MINOR 0 +#define SIRFUART_PORT_NAME "sirfsoc-uart" +#define SIRFUART_MAP_SIZE 0x200 +#define SIRFSOC_UART_NR 11 +#define SIRFSOC_PORT_TYPE 0xa5 + +/* Uart Common Use Macro*/ +#define SIRFSOC_RX_DMA_BUF_SIZE (1024 * 32) +#define BYTES_TO_ALIGN(dma_addr) ((unsigned long)(dma_addr) & 0x3) +/* Uart Fifo Level Chk */ +#define SIRFUART_TX_FIFO_SC_OFFSET 0 +#define SIRFUART_TX_FIFO_LC_OFFSET 10 +#define SIRFUART_TX_FIFO_HC_OFFSET 20 +#define SIRFUART_TX_FIFO_CHK_SC(line, value) ((((line) == 1) ? (value & 0x3) :\ + (value & 0x1f)) << SIRFUART_TX_FIFO_SC_OFFSET) +#define SIRFUART_TX_FIFO_CHK_LC(line, value) ((((line) == 1) ? (value & 0x3) :\ + (value & 0x1f)) << SIRFUART_TX_FIFO_LC_OFFSET) +#define SIRFUART_TX_FIFO_CHK_HC(line, value) ((((line) == 1) ? (value & 0x3) :\ + (value & 0x1f)) << SIRFUART_TX_FIFO_HC_OFFSET) + +#define SIRFUART_RX_FIFO_CHK_SC SIRFUART_TX_FIFO_CHK_SC +#define SIRFUART_RX_FIFO_CHK_LC SIRFUART_TX_FIFO_CHK_LC +#define SIRFUART_RX_FIFO_CHK_HC SIRFUART_TX_FIFO_CHK_HC +#define SIRFUART_RX_FIFO_MASK 0x7f +/* Indicate how many buffers used */ + +/* For Fast Baud Rate Calculation */ +struct sirfsoc_baudrate_to_regv { + unsigned int baud_rate; + unsigned int reg_val; +}; + +enum sirfsoc_tx_state { + TX_DMA_IDLE, + TX_DMA_RUNNING, + TX_DMA_PAUSE, +}; + +struct sirfsoc_rx_buffer { + struct circ_buf xmit; + dma_cookie_t cookie; + struct dma_async_tx_descriptor *desc; + dma_addr_t dma_addr; +}; + +struct sirfsoc_uart_port { + bool hw_flow_ctrl; + bool ms_enabled; + + struct uart_port port; + struct clk *clk; + /* for SiRFatlas7, there are SET/CLR for UART_INT_EN */ + bool is_atlas7; + struct sirfsoc_uart_register *uart_reg; + struct dma_chan *rx_dma_chan; + struct dma_chan *tx_dma_chan; + dma_addr_t tx_dma_addr; + struct dma_async_tx_descriptor *tx_dma_desc; + unsigned long transfer_size; + enum sirfsoc_tx_state tx_dma_state; + unsigned int cts_gpio; + unsigned int rts_gpio; + + struct sirfsoc_rx_buffer rx_dma_items; + struct hrtimer hrt; + bool is_hrt_enabled; + unsigned long rx_period_time; + unsigned long rx_last_pos; + unsigned long pio_fetch_cnt; +}; + +/* Register Access Control */ +#define portaddr(port, reg) ((port)->membase + (reg)) +#define rd_regl(port, reg) (__raw_readl(portaddr(port, reg))) +#define wr_regl(port, reg, val) __raw_writel(val, portaddr(port, reg)) + +/* UART Port Mask */ +#define SIRFUART_FIFOLEVEL_MASK(port) ((port->fifosize - 1) & 0xFFF) +#define SIRFUART_FIFOFULL_MASK(port) (port->fifosize & 0xFFF) +#define SIRFUART_FIFOEMPTY_MASK(port) ((port->fifosize & 0xFFF) << 1) diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c new file mode 100644 index 000000000..a1952e4f1 --- /dev/null +++ b/drivers/tty/serial/sprd_serial.c @@ -0,0 +1,1298 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2012-2015 Spreadtrum Communications Inc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* device name */ +#define UART_NR_MAX 8 +#define SPRD_TTY_NAME "ttyS" +#define SPRD_FIFO_SIZE 128 +#define SPRD_DEF_RATE 26000000 +#define SPRD_BAUD_IO_LIMIT 3000000 +#define SPRD_TIMEOUT 256000 + +/* the offset of serial registers and BITs for them */ +/* data registers */ +#define SPRD_TXD 0x0000 +#define SPRD_RXD 0x0004 + +/* line status register and its BITs */ +#define SPRD_LSR 0x0008 +#define SPRD_LSR_OE BIT(4) +#define SPRD_LSR_FE BIT(3) +#define SPRD_LSR_PE BIT(2) +#define SPRD_LSR_BI BIT(7) +#define SPRD_LSR_TX_OVER BIT(15) + +/* data number in TX and RX fifo */ +#define SPRD_STS1 0x000C +#define SPRD_RX_FIFO_CNT_MASK GENMASK(7, 0) +#define SPRD_TX_FIFO_CNT_MASK GENMASK(15, 8) + +/* interrupt enable register and its BITs */ +#define SPRD_IEN 0x0010 +#define SPRD_IEN_RX_FULL BIT(0) +#define SPRD_IEN_TX_EMPTY BIT(1) +#define SPRD_IEN_BREAK_DETECT BIT(7) +#define SPRD_IEN_TIMEOUT BIT(13) + +/* interrupt clear register */ +#define SPRD_ICLR 0x0014 +#define SPRD_ICLR_TIMEOUT BIT(13) + +/* line control register */ +#define SPRD_LCR 0x0018 +#define SPRD_LCR_STOP_1BIT 0x10 +#define SPRD_LCR_STOP_2BIT 0x30 +#define SPRD_LCR_DATA_LEN (BIT(2) | BIT(3)) +#define SPRD_LCR_DATA_LEN5 0x0 +#define SPRD_LCR_DATA_LEN6 0x4 +#define SPRD_LCR_DATA_LEN7 0x8 +#define SPRD_LCR_DATA_LEN8 0xc +#define SPRD_LCR_PARITY (BIT(0) | BIT(1)) +#define SPRD_LCR_PARITY_EN 0x2 +#define SPRD_LCR_EVEN_PAR 0x0 +#define SPRD_LCR_ODD_PAR 0x1 + +/* control register 1 */ +#define SPRD_CTL1 0x001C +#define SPRD_DMA_EN BIT(15) +#define SPRD_LOOPBACK_EN BIT(14) +#define RX_HW_FLOW_CTL_THLD BIT(6) +#define RX_HW_FLOW_CTL_EN BIT(7) +#define TX_HW_FLOW_CTL_EN BIT(8) +#define RX_TOUT_THLD_DEF 0x3E00 +#define RX_HFC_THLD_DEF 0x40 + +/* fifo threshold register */ +#define SPRD_CTL2 0x0020 +#define THLD_TX_EMPTY 0x40 +#define THLD_TX_EMPTY_SHIFT 8 +#define THLD_RX_FULL 0x40 +#define THLD_RX_FULL_MASK GENMASK(6, 0) + +/* config baud rate register */ +#define SPRD_CLKD0 0x0024 +#define SPRD_CLKD0_MASK GENMASK(15, 0) +#define SPRD_CLKD1 0x0028 +#define SPRD_CLKD1_MASK GENMASK(20, 16) +#define SPRD_CLKD1_SHIFT 16 + +/* interrupt mask status register */ +#define SPRD_IMSR 0x002C +#define SPRD_IMSR_RX_FIFO_FULL BIT(0) +#define SPRD_IMSR_TX_FIFO_EMPTY BIT(1) +#define SPRD_IMSR_BREAK_DETECT BIT(7) +#define SPRD_IMSR_TIMEOUT BIT(13) +#define SPRD_DEFAULT_SOURCE_CLK 26000000 + +#define SPRD_RX_DMA_STEP 1 +#define SPRD_RX_FIFO_FULL 1 +#define SPRD_TX_FIFO_FULL 0x20 +#define SPRD_UART_RX_SIZE (UART_XMIT_SIZE / 4) + +struct sprd_uart_dma { + struct dma_chan *chn; + unsigned char *virt; + dma_addr_t phys_addr; + dma_cookie_t cookie; + u32 trans_len; + bool enable; +}; + +struct sprd_uart_port { + struct uart_port port; + char name[16]; + struct clk *clk; + struct sprd_uart_dma tx_dma; + struct sprd_uart_dma rx_dma; + dma_addr_t pos; + unsigned char *rx_buf_tail; +}; + +static struct sprd_uart_port *sprd_port[UART_NR_MAX]; +static int sprd_ports_num; + +static int sprd_start_dma_rx(struct uart_port *port); +static int sprd_tx_dma_config(struct uart_port *port); + +static inline unsigned int serial_in(struct uart_port *port, + unsigned int offset) +{ + return readl_relaxed(port->membase + offset); +} + +static inline void serial_out(struct uart_port *port, unsigned int offset, + int value) +{ + writel_relaxed(value, port->membase + offset); +} + +static unsigned int sprd_tx_empty(struct uart_port *port) +{ + if (serial_in(port, SPRD_STS1) & SPRD_TX_FIFO_CNT_MASK) + return 0; + else + return TIOCSER_TEMT; +} + +static unsigned int sprd_get_mctrl(struct uart_port *port) +{ + return TIOCM_DSR | TIOCM_CTS; +} + +static void sprd_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + u32 val = serial_in(port, SPRD_CTL1); + + if (mctrl & TIOCM_LOOP) + val |= SPRD_LOOPBACK_EN; + else + val &= ~SPRD_LOOPBACK_EN; + + serial_out(port, SPRD_CTL1, val); +} + +static void sprd_stop_rx(struct uart_port *port) +{ + struct sprd_uart_port *sp = + container_of(port, struct sprd_uart_port, port); + unsigned int ien, iclr; + + if (sp->rx_dma.enable) + dmaengine_terminate_all(sp->rx_dma.chn); + + iclr = serial_in(port, SPRD_ICLR); + ien = serial_in(port, SPRD_IEN); + + ien &= ~(SPRD_IEN_RX_FULL | SPRD_IEN_BREAK_DETECT); + iclr |= SPRD_IEN_RX_FULL | SPRD_IEN_BREAK_DETECT; + + serial_out(port, SPRD_IEN, ien); + serial_out(port, SPRD_ICLR, iclr); +} + +static void sprd_uart_dma_enable(struct uart_port *port, bool enable) +{ + u32 val = serial_in(port, SPRD_CTL1); + + if (enable) + val |= SPRD_DMA_EN; + else + val &= ~SPRD_DMA_EN; + + serial_out(port, SPRD_CTL1, val); +} + +static void sprd_stop_tx_dma(struct uart_port *port) +{ + struct sprd_uart_port *sp = + container_of(port, struct sprd_uart_port, port); + struct circ_buf *xmit = &port->state->xmit; + struct dma_tx_state state; + u32 trans_len; + + dmaengine_pause(sp->tx_dma.chn); + + dmaengine_tx_status(sp->tx_dma.chn, sp->tx_dma.cookie, &state); + if (state.residue) { + trans_len = state.residue - sp->tx_dma.phys_addr; + xmit->tail = (xmit->tail + trans_len) & (UART_XMIT_SIZE - 1); + port->icount.tx += trans_len; + dma_unmap_single(port->dev, sp->tx_dma.phys_addr, + sp->tx_dma.trans_len, DMA_TO_DEVICE); + } + + dmaengine_terminate_all(sp->tx_dma.chn); + sp->tx_dma.trans_len = 0; +} + +static int sprd_tx_buf_remap(struct uart_port *port) +{ + struct sprd_uart_port *sp = + container_of(port, struct sprd_uart_port, port); + struct circ_buf *xmit = &port->state->xmit; + + sp->tx_dma.trans_len = + CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); + + sp->tx_dma.phys_addr = dma_map_single(port->dev, + (void *)&(xmit->buf[xmit->tail]), + sp->tx_dma.trans_len, + DMA_TO_DEVICE); + return dma_mapping_error(port->dev, sp->tx_dma.phys_addr); +} + +static void sprd_complete_tx_dma(void *data) +{ + struct uart_port *port = (struct uart_port *)data; + struct sprd_uart_port *sp = + container_of(port, struct sprd_uart_port, port); + struct circ_buf *xmit = &port->state->xmit; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + dma_unmap_single(port->dev, sp->tx_dma.phys_addr, + sp->tx_dma.trans_len, DMA_TO_DEVICE); + + xmit->tail = (xmit->tail + sp->tx_dma.trans_len) & (UART_XMIT_SIZE - 1); + port->icount.tx += sp->tx_dma.trans_len; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit) || sprd_tx_buf_remap(port) || + sprd_tx_dma_config(port)) + sp->tx_dma.trans_len = 0; + + spin_unlock_irqrestore(&port->lock, flags); +} + +static int sprd_uart_dma_submit(struct uart_port *port, + struct sprd_uart_dma *ud, u32 trans_len, + enum dma_transfer_direction direction, + dma_async_tx_callback callback) +{ + struct dma_async_tx_descriptor *dma_des; + unsigned long flags; + + flags = SPRD_DMA_FLAGS(SPRD_DMA_CHN_MODE_NONE, + SPRD_DMA_NO_TRG, + SPRD_DMA_FRAG_REQ, + SPRD_DMA_TRANS_INT); + + dma_des = dmaengine_prep_slave_single(ud->chn, ud->phys_addr, trans_len, + direction, flags); + if (!dma_des) + return -ENODEV; + + dma_des->callback = callback; + dma_des->callback_param = port; + + ud->cookie = dmaengine_submit(dma_des); + if (dma_submit_error(ud->cookie)) + return dma_submit_error(ud->cookie); + + dma_async_issue_pending(ud->chn); + + return 0; +} + +static int sprd_tx_dma_config(struct uart_port *port) +{ + struct sprd_uart_port *sp = + container_of(port, struct sprd_uart_port, port); + u32 burst = sp->tx_dma.trans_len > SPRD_TX_FIFO_FULL ? + SPRD_TX_FIFO_FULL : sp->tx_dma.trans_len; + int ret; + struct dma_slave_config cfg = { + .dst_addr = port->mapbase + SPRD_TXD, + .src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, + .dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, + .src_maxburst = burst, + }; + + ret = dmaengine_slave_config(sp->tx_dma.chn, &cfg); + if (ret < 0) + return ret; + + return sprd_uart_dma_submit(port, &sp->tx_dma, sp->tx_dma.trans_len, + DMA_MEM_TO_DEV, sprd_complete_tx_dma); +} + +static void sprd_start_tx_dma(struct uart_port *port) +{ + struct sprd_uart_port *sp = + container_of(port, struct sprd_uart_port, port); + struct circ_buf *xmit = &port->state->xmit; + + if (port->x_char) { + serial_out(port, SPRD_TXD, port->x_char); + port->icount.tx++; + port->x_char = 0; + return; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + sprd_stop_tx_dma(port); + return; + } + + if (sp->tx_dma.trans_len) + return; + + if (sprd_tx_buf_remap(port) || sprd_tx_dma_config(port)) + sp->tx_dma.trans_len = 0; +} + +static void sprd_rx_full_thld(struct uart_port *port, u32 thld) +{ + u32 val = serial_in(port, SPRD_CTL2); + + val &= ~THLD_RX_FULL_MASK; + val |= thld & THLD_RX_FULL_MASK; + serial_out(port, SPRD_CTL2, val); +} + +static int sprd_rx_alloc_buf(struct sprd_uart_port *sp) +{ + sp->rx_dma.virt = dma_alloc_coherent(sp->port.dev, SPRD_UART_RX_SIZE, + &sp->rx_dma.phys_addr, GFP_KERNEL); + if (!sp->rx_dma.virt) + return -ENOMEM; + + return 0; +} + +static void sprd_rx_free_buf(struct sprd_uart_port *sp) +{ + if (sp->rx_dma.virt) + dma_free_coherent(sp->port.dev, SPRD_UART_RX_SIZE, + sp->rx_dma.virt, sp->rx_dma.phys_addr); + sp->rx_dma.virt = NULL; +} + +static int sprd_rx_dma_config(struct uart_port *port, u32 burst) +{ + struct sprd_uart_port *sp = + container_of(port, struct sprd_uart_port, port); + struct dma_slave_config cfg = { + .src_addr = port->mapbase + SPRD_RXD, + .src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, + .dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, + .src_maxburst = burst, + }; + + return dmaengine_slave_config(sp->rx_dma.chn, &cfg); +} + +static void sprd_uart_dma_rx(struct uart_port *port) +{ + struct sprd_uart_port *sp = + container_of(port, struct sprd_uart_port, port); + struct tty_port *tty = &port->state->port; + + port->icount.rx += sp->rx_dma.trans_len; + tty_insert_flip_string(tty, sp->rx_buf_tail, sp->rx_dma.trans_len); + tty_flip_buffer_push(tty); +} + +static void sprd_uart_dma_irq(struct uart_port *port) +{ + struct sprd_uart_port *sp = + container_of(port, struct sprd_uart_port, port); + struct dma_tx_state state; + enum dma_status status; + + status = dmaengine_tx_status(sp->rx_dma.chn, + sp->rx_dma.cookie, &state); + if (status == DMA_ERROR) + sprd_stop_rx(port); + + if (!state.residue && sp->pos == sp->rx_dma.phys_addr) + return; + + if (!state.residue) { + sp->rx_dma.trans_len = SPRD_UART_RX_SIZE + + sp->rx_dma.phys_addr - sp->pos; + sp->pos = sp->rx_dma.phys_addr; + } else { + sp->rx_dma.trans_len = state.residue - sp->pos; + sp->pos = state.residue; + } + + sprd_uart_dma_rx(port); + sp->rx_buf_tail += sp->rx_dma.trans_len; +} + +static void sprd_complete_rx_dma(void *data) +{ + struct uart_port *port = (struct uart_port *)data; + struct sprd_uart_port *sp = + container_of(port, struct sprd_uart_port, port); + struct dma_tx_state state; + enum dma_status status; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + status = dmaengine_tx_status(sp->rx_dma.chn, + sp->rx_dma.cookie, &state); + if (status != DMA_COMPLETE) { + sprd_stop_rx(port); + spin_unlock_irqrestore(&port->lock, flags); + return; + } + + if (sp->pos != sp->rx_dma.phys_addr) { + sp->rx_dma.trans_len = SPRD_UART_RX_SIZE + + sp->rx_dma.phys_addr - sp->pos; + sprd_uart_dma_rx(port); + sp->rx_buf_tail += sp->rx_dma.trans_len; + } + + if (sprd_start_dma_rx(port)) + sprd_stop_rx(port); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static int sprd_start_dma_rx(struct uart_port *port) +{ + struct sprd_uart_port *sp = + container_of(port, struct sprd_uart_port, port); + int ret; + + if (!sp->rx_dma.enable) + return 0; + + sp->pos = sp->rx_dma.phys_addr; + sp->rx_buf_tail = sp->rx_dma.virt; + sprd_rx_full_thld(port, SPRD_RX_FIFO_FULL); + ret = sprd_rx_dma_config(port, SPRD_RX_DMA_STEP); + if (ret) + return ret; + + return sprd_uart_dma_submit(port, &sp->rx_dma, SPRD_UART_RX_SIZE, + DMA_DEV_TO_MEM, sprd_complete_rx_dma); +} + +static void sprd_release_dma(struct uart_port *port) +{ + struct sprd_uart_port *sp = + container_of(port, struct sprd_uart_port, port); + + sprd_uart_dma_enable(port, false); + + if (sp->rx_dma.enable) + dma_release_channel(sp->rx_dma.chn); + + if (sp->tx_dma.enable) + dma_release_channel(sp->tx_dma.chn); + + sp->tx_dma.enable = false; + sp->rx_dma.enable = false; +} + +static void sprd_request_dma(struct uart_port *port) +{ + struct sprd_uart_port *sp = + container_of(port, struct sprd_uart_port, port); + + sp->tx_dma.enable = true; + sp->rx_dma.enable = true; + + sp->tx_dma.chn = dma_request_chan(port->dev, "tx"); + if (IS_ERR(sp->tx_dma.chn)) { + dev_err(port->dev, "request TX DMA channel failed, ret = %ld\n", + PTR_ERR(sp->tx_dma.chn)); + sp->tx_dma.enable = false; + } + + sp->rx_dma.chn = dma_request_chan(port->dev, "rx"); + if (IS_ERR(sp->rx_dma.chn)) { + dev_err(port->dev, "request RX DMA channel failed, ret = %ld\n", + PTR_ERR(sp->rx_dma.chn)); + sp->rx_dma.enable = false; + } +} + +static void sprd_stop_tx(struct uart_port *port) +{ + struct sprd_uart_port *sp = container_of(port, struct sprd_uart_port, + port); + unsigned int ien, iclr; + + if (sp->tx_dma.enable) { + sprd_stop_tx_dma(port); + return; + } + + iclr = serial_in(port, SPRD_ICLR); + ien = serial_in(port, SPRD_IEN); + + iclr |= SPRD_IEN_TX_EMPTY; + ien &= ~SPRD_IEN_TX_EMPTY; + + serial_out(port, SPRD_IEN, ien); + serial_out(port, SPRD_ICLR, iclr); +} + +static void sprd_start_tx(struct uart_port *port) +{ + struct sprd_uart_port *sp = container_of(port, struct sprd_uart_port, + port); + unsigned int ien; + + if (sp->tx_dma.enable) { + sprd_start_tx_dma(port); + return; + } + + ien = serial_in(port, SPRD_IEN); + if (!(ien & SPRD_IEN_TX_EMPTY)) { + ien |= SPRD_IEN_TX_EMPTY; + serial_out(port, SPRD_IEN, ien); + } +} + +/* The Sprd serial does not support this function. */ +static void sprd_break_ctl(struct uart_port *port, int break_state) +{ + /* nothing to do */ +} + +static int handle_lsr_errors(struct uart_port *port, + unsigned int *flag, + unsigned int *lsr) +{ + int ret = 0; + + /* statistics */ + if (*lsr & SPRD_LSR_BI) { + *lsr &= ~(SPRD_LSR_FE | SPRD_LSR_PE); + port->icount.brk++; + ret = uart_handle_break(port); + if (ret) + return ret; + } else if (*lsr & SPRD_LSR_PE) + port->icount.parity++; + else if (*lsr & SPRD_LSR_FE) + port->icount.frame++; + if (*lsr & SPRD_LSR_OE) + port->icount.overrun++; + + /* mask off conditions which should be ignored */ + *lsr &= port->read_status_mask; + if (*lsr & SPRD_LSR_BI) + *flag = TTY_BREAK; + else if (*lsr & SPRD_LSR_PE) + *flag = TTY_PARITY; + else if (*lsr & SPRD_LSR_FE) + *flag = TTY_FRAME; + + return ret; +} + +static inline void sprd_rx(struct uart_port *port) +{ + struct sprd_uart_port *sp = container_of(port, struct sprd_uart_port, + port); + struct tty_port *tty = &port->state->port; + unsigned int ch, flag, lsr, max_count = SPRD_TIMEOUT; + + if (sp->rx_dma.enable) { + sprd_uart_dma_irq(port); + return; + } + + while ((serial_in(port, SPRD_STS1) & SPRD_RX_FIFO_CNT_MASK) && + max_count--) { + lsr = serial_in(port, SPRD_LSR); + ch = serial_in(port, SPRD_RXD); + flag = TTY_NORMAL; + port->icount.rx++; + + if (lsr & (SPRD_LSR_BI | SPRD_LSR_PE | + SPRD_LSR_FE | SPRD_LSR_OE)) + if (handle_lsr_errors(port, &flag, &lsr)) + continue; + if (uart_handle_sysrq_char(port, ch)) + continue; + + uart_insert_char(port, lsr, SPRD_LSR_OE, ch, flag); + } + + tty_flip_buffer_push(tty); +} + +static inline void sprd_tx(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + int count; + + if (port->x_char) { + serial_out(port, SPRD_TXD, port->x_char); + port->icount.tx++; + port->x_char = 0; + return; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + sprd_stop_tx(port); + return; + } + + count = THLD_TX_EMPTY; + do { + serial_out(port, SPRD_TXD, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + sprd_stop_tx(port); +} + +/* this handles the interrupt from one port */ +static irqreturn_t sprd_handle_irq(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + unsigned int ims; + + spin_lock(&port->lock); + + ims = serial_in(port, SPRD_IMSR); + + if (!ims) { + spin_unlock(&port->lock); + return IRQ_NONE; + } + + if (ims & SPRD_IMSR_TIMEOUT) + serial_out(port, SPRD_ICLR, SPRD_ICLR_TIMEOUT); + + if (ims & SPRD_IMSR_BREAK_DETECT) + serial_out(port, SPRD_ICLR, SPRD_IMSR_BREAK_DETECT); + + if (ims & (SPRD_IMSR_RX_FIFO_FULL | SPRD_IMSR_BREAK_DETECT | + SPRD_IMSR_TIMEOUT)) + sprd_rx(port); + + if (ims & SPRD_IMSR_TX_FIFO_EMPTY) + sprd_tx(port); + + spin_unlock(&port->lock); + + return IRQ_HANDLED; +} + +static void sprd_uart_dma_startup(struct uart_port *port, + struct sprd_uart_port *sp) +{ + int ret; + + sprd_request_dma(port); + if (!(sp->rx_dma.enable || sp->tx_dma.enable)) + return; + + ret = sprd_start_dma_rx(port); + if (ret) { + sp->rx_dma.enable = false; + dma_release_channel(sp->rx_dma.chn); + dev_warn(port->dev, "fail to start RX dma mode\n"); + } + + sprd_uart_dma_enable(port, true); +} + +static int sprd_startup(struct uart_port *port) +{ + int ret = 0; + unsigned int ien, fc; + unsigned int timeout; + struct sprd_uart_port *sp; + unsigned long flags; + + serial_out(port, SPRD_CTL2, + THLD_TX_EMPTY << THLD_TX_EMPTY_SHIFT | THLD_RX_FULL); + + /* clear rx fifo */ + timeout = SPRD_TIMEOUT; + while (timeout-- && serial_in(port, SPRD_STS1) & SPRD_RX_FIFO_CNT_MASK) + serial_in(port, SPRD_RXD); + + /* clear tx fifo */ + timeout = SPRD_TIMEOUT; + while (timeout-- && serial_in(port, SPRD_STS1) & SPRD_TX_FIFO_CNT_MASK) + cpu_relax(); + + /* clear interrupt */ + serial_out(port, SPRD_IEN, 0); + serial_out(port, SPRD_ICLR, ~0); + + /* allocate irq */ + sp = container_of(port, struct sprd_uart_port, port); + snprintf(sp->name, sizeof(sp->name), "sprd_serial%d", port->line); + + sprd_uart_dma_startup(port, sp); + + ret = devm_request_irq(port->dev, port->irq, sprd_handle_irq, + IRQF_SHARED, sp->name, port); + if (ret) { + dev_err(port->dev, "fail to request serial irq %d, ret=%d\n", + port->irq, ret); + return ret; + } + fc = serial_in(port, SPRD_CTL1); + fc |= RX_TOUT_THLD_DEF | RX_HFC_THLD_DEF; + serial_out(port, SPRD_CTL1, fc); + + /* enable interrupt */ + spin_lock_irqsave(&port->lock, flags); + ien = serial_in(port, SPRD_IEN); + ien |= SPRD_IEN_BREAK_DETECT | SPRD_IEN_TIMEOUT; + if (!sp->rx_dma.enable) + ien |= SPRD_IEN_RX_FULL; + serial_out(port, SPRD_IEN, ien); + spin_unlock_irqrestore(&port->lock, flags); + + return 0; +} + +static void sprd_shutdown(struct uart_port *port) +{ + sprd_release_dma(port); + serial_out(port, SPRD_IEN, 0); + serial_out(port, SPRD_ICLR, ~0); + devm_free_irq(port->dev, port->irq, port); +} + +static void sprd_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + unsigned int baud, quot; + unsigned int lcr = 0, fc; + unsigned long flags; + + /* ask the core to calculate the divisor for us */ + baud = uart_get_baud_rate(port, termios, old, 0, SPRD_BAUD_IO_LIMIT); + + quot = port->uartclk / baud; + + /* set data length */ + switch (termios->c_cflag & CSIZE) { + case CS5: + lcr |= SPRD_LCR_DATA_LEN5; + break; + case CS6: + lcr |= SPRD_LCR_DATA_LEN6; + break; + case CS7: + lcr |= SPRD_LCR_DATA_LEN7; + break; + case CS8: + default: + lcr |= SPRD_LCR_DATA_LEN8; + break; + } + + /* calculate stop bits */ + lcr &= ~(SPRD_LCR_STOP_1BIT | SPRD_LCR_STOP_2BIT); + if (termios->c_cflag & CSTOPB) + lcr |= SPRD_LCR_STOP_2BIT; + else + lcr |= SPRD_LCR_STOP_1BIT; + + /* calculate parity */ + lcr &= ~SPRD_LCR_PARITY; + termios->c_cflag &= ~CMSPAR; /* no support mark/space */ + if (termios->c_cflag & PARENB) { + lcr |= SPRD_LCR_PARITY_EN; + if (termios->c_cflag & PARODD) + lcr |= SPRD_LCR_ODD_PAR; + else + lcr |= SPRD_LCR_EVEN_PAR; + } + + spin_lock_irqsave(&port->lock, flags); + + /* update the per-port timeout */ + uart_update_timeout(port, termios->c_cflag, baud); + + port->read_status_mask = SPRD_LSR_OE; + if (termios->c_iflag & INPCK) + port->read_status_mask |= SPRD_LSR_FE | SPRD_LSR_PE; + if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) + port->read_status_mask |= SPRD_LSR_BI; + + /* characters to ignore */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= SPRD_LSR_PE | SPRD_LSR_FE; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= SPRD_LSR_BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= SPRD_LSR_OE; + } + + /* flow control */ + fc = serial_in(port, SPRD_CTL1); + fc &= ~(RX_HW_FLOW_CTL_THLD | RX_HW_FLOW_CTL_EN | TX_HW_FLOW_CTL_EN); + if (termios->c_cflag & CRTSCTS) { + fc |= RX_HW_FLOW_CTL_THLD; + fc |= RX_HW_FLOW_CTL_EN; + fc |= TX_HW_FLOW_CTL_EN; + } + + /* clock divider bit0~bit15 */ + serial_out(port, SPRD_CLKD0, quot & SPRD_CLKD0_MASK); + + /* clock divider bit16~bit20 */ + serial_out(port, SPRD_CLKD1, + (quot & SPRD_CLKD1_MASK) >> SPRD_CLKD1_SHIFT); + serial_out(port, SPRD_LCR, lcr); + fc |= RX_TOUT_THLD_DEF | RX_HFC_THLD_DEF; + serial_out(port, SPRD_CTL1, fc); + + spin_unlock_irqrestore(&port->lock, flags); + + /* Don't rewrite B0 */ + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, baud, baud); +} + +static const char *sprd_type(struct uart_port *port) +{ + return "SPX"; +} + +static void sprd_release_port(struct uart_port *port) +{ + /* nothing to do */ +} + +static int sprd_request_port(struct uart_port *port) +{ + return 0; +} + +static void sprd_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) + port->type = PORT_SPRD; +} + +static int sprd_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + if (ser->type != PORT_SPRD) + return -EINVAL; + if (port->irq != ser->irq) + return -EINVAL; + if (port->iotype != ser->io_type) + return -EINVAL; + return 0; +} + +static void sprd_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct sprd_uart_port *sup = + container_of(port, struct sprd_uart_port, port); + + switch (state) { + case UART_PM_STATE_ON: + clk_prepare_enable(sup->clk); + break; + case UART_PM_STATE_OFF: + clk_disable_unprepare(sup->clk); + break; + } +} + +#ifdef CONFIG_CONSOLE_POLL +static int sprd_poll_init(struct uart_port *port) +{ + if (port->state->pm_state != UART_PM_STATE_ON) { + sprd_pm(port, UART_PM_STATE_ON, 0); + port->state->pm_state = UART_PM_STATE_ON; + } + + return 0; +} + +static int sprd_poll_get_char(struct uart_port *port) +{ + while (!(serial_in(port, SPRD_STS1) & SPRD_RX_FIFO_CNT_MASK)) + cpu_relax(); + + return serial_in(port, SPRD_RXD); +} + +static void sprd_poll_put_char(struct uart_port *port, unsigned char ch) +{ + while (serial_in(port, SPRD_STS1) & SPRD_TX_FIFO_CNT_MASK) + cpu_relax(); + + serial_out(port, SPRD_TXD, ch); +} +#endif + +static const struct uart_ops serial_sprd_ops = { + .tx_empty = sprd_tx_empty, + .get_mctrl = sprd_get_mctrl, + .set_mctrl = sprd_set_mctrl, + .stop_tx = sprd_stop_tx, + .start_tx = sprd_start_tx, + .stop_rx = sprd_stop_rx, + .break_ctl = sprd_break_ctl, + .startup = sprd_startup, + .shutdown = sprd_shutdown, + .set_termios = sprd_set_termios, + .type = sprd_type, + .release_port = sprd_release_port, + .request_port = sprd_request_port, + .config_port = sprd_config_port, + .verify_port = sprd_verify_port, + .pm = sprd_pm, +#ifdef CONFIG_CONSOLE_POLL + .poll_init = sprd_poll_init, + .poll_get_char = sprd_poll_get_char, + .poll_put_char = sprd_poll_put_char, +#endif +}; + +#ifdef CONFIG_SERIAL_SPRD_CONSOLE +static void wait_for_xmitr(struct uart_port *port) +{ + unsigned int status, tmout = 10000; + + /* wait up to 10ms for the character(s) to be sent */ + do { + status = serial_in(port, SPRD_STS1); + if (--tmout == 0) + break; + udelay(1); + } while (status & SPRD_TX_FIFO_CNT_MASK); +} + +static void sprd_console_putchar(struct uart_port *port, int ch) +{ + wait_for_xmitr(port); + serial_out(port, SPRD_TXD, ch); +} + +static void sprd_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_port *port = &sprd_port[co->index]->port; + int locked = 1; + unsigned long flags; + + if (port->sysrq) + locked = 0; + else if (oops_in_progress) + locked = spin_trylock_irqsave(&port->lock, flags); + else + spin_lock_irqsave(&port->lock, flags); + + uart_console_write(port, s, count, sprd_console_putchar); + + /* wait for transmitter to become empty */ + wait_for_xmitr(port); + + if (locked) + spin_unlock_irqrestore(&port->lock, flags); +} + +static int sprd_console_setup(struct console *co, char *options) +{ + struct sprd_uart_port *sprd_uart_port; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index >= UART_NR_MAX || co->index < 0) + co->index = 0; + + sprd_uart_port = sprd_port[co->index]; + if (!sprd_uart_port || !sprd_uart_port->port.membase) { + pr_info("serial port %d not yet initialized\n", co->index); + return -ENODEV; + } + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&sprd_uart_port->port, co, baud, + parity, bits, flow); +} + +static struct uart_driver sprd_uart_driver; +static struct console sprd_console = { + .name = SPRD_TTY_NAME, + .write = sprd_console_write, + .device = uart_console_device, + .setup = sprd_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &sprd_uart_driver, +}; + +static int __init sprd_serial_console_init(void) +{ + register_console(&sprd_console); + return 0; +} +console_initcall(sprd_serial_console_init); + +#define SPRD_CONSOLE (&sprd_console) + +/* Support for earlycon */ +static void sprd_putc(struct uart_port *port, int c) +{ + unsigned int timeout = SPRD_TIMEOUT; + + while (timeout-- && + !(readl(port->membase + SPRD_LSR) & SPRD_LSR_TX_OVER)) + cpu_relax(); + + writeb(c, port->membase + SPRD_TXD); +} + +static void sprd_early_write(struct console *con, const char *s, unsigned int n) +{ + struct earlycon_device *dev = con->data; + + uart_console_write(&dev->port, s, n, sprd_putc); +} + +static int __init sprd_early_console_setup(struct earlycon_device *device, + const char *opt) +{ + if (!device->port.membase) + return -ENODEV; + + device->con->write = sprd_early_write; + return 0; +} +OF_EARLYCON_DECLARE(sprd_serial, "sprd,sc9836-uart", + sprd_early_console_setup); + +#else /* !CONFIG_SERIAL_SPRD_CONSOLE */ +#define SPRD_CONSOLE NULL +#endif + +static struct uart_driver sprd_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "sprd_serial", + .dev_name = SPRD_TTY_NAME, + .major = 0, + .minor = 0, + .nr = UART_NR_MAX, + .cons = SPRD_CONSOLE, +}; + +static int sprd_remove(struct platform_device *dev) +{ + struct sprd_uart_port *sup = platform_get_drvdata(dev); + + if (sup) { + uart_remove_one_port(&sprd_uart_driver, &sup->port); + sprd_port[sup->port.line] = NULL; + sprd_rx_free_buf(sup); + sprd_ports_num--; + } + + if (!sprd_ports_num) + uart_unregister_driver(&sprd_uart_driver); + + return 0; +} + +static bool sprd_uart_is_console(struct uart_port *uport) +{ + struct console *cons = sprd_uart_driver.cons; + + if ((cons && cons->index >= 0 && cons->index == uport->line) || + of_console_check(uport->dev->of_node, SPRD_TTY_NAME, uport->line)) + return true; + + return false; +} + +static int sprd_clk_init(struct uart_port *uport) +{ + struct clk *clk_uart, *clk_parent; + struct sprd_uart_port *u = container_of(uport, struct sprd_uart_port, port); + + clk_uart = devm_clk_get(uport->dev, "uart"); + if (IS_ERR(clk_uart)) { + dev_warn(uport->dev, "uart%d can't get uart clock\n", + uport->line); + clk_uart = NULL; + } + + clk_parent = devm_clk_get(uport->dev, "source"); + if (IS_ERR(clk_parent)) { + dev_warn(uport->dev, "uart%d can't get source clock\n", + uport->line); + clk_parent = NULL; + } + + if (!clk_uart || clk_set_parent(clk_uart, clk_parent)) + uport->uartclk = SPRD_DEFAULT_SOURCE_CLK; + else + uport->uartclk = clk_get_rate(clk_uart); + + u->clk = devm_clk_get(uport->dev, "enable"); + if (IS_ERR(u->clk)) { + if (PTR_ERR(u->clk) == -EPROBE_DEFER) + return -EPROBE_DEFER; + + dev_warn(uport->dev, "uart%d can't get enable clock\n", + uport->line); + + /* To keep console alive even if the error occurred */ + if (!sprd_uart_is_console(uport)) + return PTR_ERR(u->clk); + + u->clk = NULL; + } + + return 0; +} + +static int sprd_probe(struct platform_device *pdev) +{ + struct resource *res; + struct uart_port *up; + struct sprd_uart_port *sport; + int irq; + int index; + int ret; + + index = of_alias_get_id(pdev->dev.of_node, "serial"); + if (index < 0 || index >= UART_NR_MAX) { + dev_err(&pdev->dev, "got a wrong serial alias id %d\n", index); + return -EINVAL; + } + + sport = devm_kzalloc(&pdev->dev, sizeof(*sport), GFP_KERNEL); + if (!sport) + return -ENOMEM; + + up = &sport->port; + up->dev = &pdev->dev; + up->line = index; + up->type = PORT_SPRD; + up->iotype = UPIO_MEM; + up->uartclk = SPRD_DEF_RATE; + up->fifosize = SPRD_FIFO_SIZE; + up->ops = &serial_sprd_ops; + up->flags = UPF_BOOT_AUTOCONF; + up->has_sysrq = IS_ENABLED(CONFIG_SERIAL_SPRD_CONSOLE); + + ret = sprd_clk_init(up); + if (ret) + return ret; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + up->membase = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(up->membase)) + return PTR_ERR(up->membase); + + up->mapbase = res->start; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + up->irq = irq; + + /* + * Allocate one dma buffer to prepare for receive transfer, in case + * memory allocation failure at runtime. + */ + ret = sprd_rx_alloc_buf(sport); + if (ret) + return ret; + + if (!sprd_ports_num) { + ret = uart_register_driver(&sprd_uart_driver); + if (ret < 0) { + pr_err("Failed to register SPRD-UART driver\n"); + goto free_rx_buf; + } + } + + sprd_ports_num++; + sprd_port[index] = sport; + + ret = uart_add_one_port(&sprd_uart_driver, up); + if (ret) + goto clean_port; + + platform_set_drvdata(pdev, up); + + return 0; + +clean_port: + sprd_port[index] = NULL; + if (--sprd_ports_num == 0) + uart_unregister_driver(&sprd_uart_driver); +free_rx_buf: + sprd_rx_free_buf(sport); + return ret; +} + +#ifdef CONFIG_PM_SLEEP +static int sprd_suspend(struct device *dev) +{ + struct sprd_uart_port *sup = dev_get_drvdata(dev); + + uart_suspend_port(&sprd_uart_driver, &sup->port); + + return 0; +} + +static int sprd_resume(struct device *dev) +{ + struct sprd_uart_port *sup = dev_get_drvdata(dev); + + uart_resume_port(&sprd_uart_driver, &sup->port); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(sprd_pm_ops, sprd_suspend, sprd_resume); + +static const struct of_device_id serial_ids[] = { + {.compatible = "sprd,sc9836-uart",}, + {} +}; +MODULE_DEVICE_TABLE(of, serial_ids); + +static struct platform_driver sprd_platform_driver = { + .probe = sprd_probe, + .remove = sprd_remove, + .driver = { + .name = "sprd_serial", + .of_match_table = of_match_ptr(serial_ids), + .pm = &sprd_pm_ops, + }, +}; + +module_platform_driver(sprd_platform_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Spreadtrum SoC serial driver series"); diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c new file mode 100644 index 000000000..97d36f870 --- /dev/null +++ b/drivers/tty/serial/st-asc.c @@ -0,0 +1,1010 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * st-asc.c: ST Asynchronous serial controller (ASC) driver + * + * Copyright (C) 2003-2013 STMicroelectronics (R&D) Limited + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRIVER_NAME "st-asc" +#define ASC_SERIAL_NAME "ttyAS" +#define ASC_FIFO_SIZE 16 +#define ASC_MAX_PORTS 8 + +/* Pinctrl states */ +#define DEFAULT 0 +#define NO_HW_FLOWCTRL 1 + +struct asc_port { + struct uart_port port; + struct gpio_desc *rts; + struct clk *clk; + struct pinctrl *pinctrl; + struct pinctrl_state *states[2]; + unsigned int hw_flow_control:1; + unsigned int force_m1:1; +}; + +static struct asc_port asc_ports[ASC_MAX_PORTS]; +static struct uart_driver asc_uart_driver; + +/*---- UART Register definitions ------------------------------*/ + +/* Register offsets */ + +#define ASC_BAUDRATE 0x00 +#define ASC_TXBUF 0x04 +#define ASC_RXBUF 0x08 +#define ASC_CTL 0x0C +#define ASC_INTEN 0x10 +#define ASC_STA 0x14 +#define ASC_GUARDTIME 0x18 +#define ASC_TIMEOUT 0x1C +#define ASC_TXRESET 0x20 +#define ASC_RXRESET 0x24 +#define ASC_RETRIES 0x28 + +/* ASC_RXBUF */ +#define ASC_RXBUF_PE 0x100 +#define ASC_RXBUF_FE 0x200 +/** + * Some of status comes from higher bits of the character and some come from + * the status register. Combining both of them in to single status using dummy + * bits. + */ +#define ASC_RXBUF_DUMMY_RX 0x10000 +#define ASC_RXBUF_DUMMY_BE 0x20000 +#define ASC_RXBUF_DUMMY_OE 0x40000 + +/* ASC_CTL */ + +#define ASC_CTL_MODE_MSK 0x0007 +#define ASC_CTL_MODE_8BIT 0x0001 +#define ASC_CTL_MODE_7BIT_PAR 0x0003 +#define ASC_CTL_MODE_9BIT 0x0004 +#define ASC_CTL_MODE_8BIT_WKUP 0x0005 +#define ASC_CTL_MODE_8BIT_PAR 0x0007 +#define ASC_CTL_STOP_MSK 0x0018 +#define ASC_CTL_STOP_HALFBIT 0x0000 +#define ASC_CTL_STOP_1BIT 0x0008 +#define ASC_CTL_STOP_1_HALFBIT 0x0010 +#define ASC_CTL_STOP_2BIT 0x0018 +#define ASC_CTL_PARITYODD 0x0020 +#define ASC_CTL_LOOPBACK 0x0040 +#define ASC_CTL_RUN 0x0080 +#define ASC_CTL_RXENABLE 0x0100 +#define ASC_CTL_SCENABLE 0x0200 +#define ASC_CTL_FIFOENABLE 0x0400 +#define ASC_CTL_CTSENABLE 0x0800 +#define ASC_CTL_BAUDMODE 0x1000 + +/* ASC_GUARDTIME */ + +#define ASC_GUARDTIME_MSK 0x00FF + +/* ASC_INTEN */ + +#define ASC_INTEN_RBE 0x0001 +#define ASC_INTEN_TE 0x0002 +#define ASC_INTEN_THE 0x0004 +#define ASC_INTEN_PE 0x0008 +#define ASC_INTEN_FE 0x0010 +#define ASC_INTEN_OE 0x0020 +#define ASC_INTEN_TNE 0x0040 +#define ASC_INTEN_TOI 0x0080 +#define ASC_INTEN_RHF 0x0100 + +/* ASC_RETRIES */ + +#define ASC_RETRIES_MSK 0x00FF + +/* ASC_RXBUF */ + +#define ASC_RXBUF_MSK 0x03FF + +/* ASC_STA */ + +#define ASC_STA_RBF 0x0001 +#define ASC_STA_TE 0x0002 +#define ASC_STA_THE 0x0004 +#define ASC_STA_PE 0x0008 +#define ASC_STA_FE 0x0010 +#define ASC_STA_OE 0x0020 +#define ASC_STA_TNE 0x0040 +#define ASC_STA_TOI 0x0080 +#define ASC_STA_RHF 0x0100 +#define ASC_STA_TF 0x0200 +#define ASC_STA_NKD 0x0400 + +/* ASC_TIMEOUT */ + +#define ASC_TIMEOUT_MSK 0x00FF + +/* ASC_TXBUF */ + +#define ASC_TXBUF_MSK 0x01FF + +/*---- Inline function definitions ---------------------------*/ + +static inline struct asc_port *to_asc_port(struct uart_port *port) +{ + return container_of(port, struct asc_port, port); +} + +static inline u32 asc_in(struct uart_port *port, u32 offset) +{ +#ifdef readl_relaxed + return readl_relaxed(port->membase + offset); +#else + return readl(port->membase + offset); +#endif +} + +static inline void asc_out(struct uart_port *port, u32 offset, u32 value) +{ +#ifdef writel_relaxed + writel_relaxed(value, port->membase + offset); +#else + writel(value, port->membase + offset); +#endif +} + +/* + * Some simple utility functions to enable and disable interrupts. + * Note that these need to be called with interrupts disabled. + */ +static inline void asc_disable_tx_interrupts(struct uart_port *port) +{ + u32 intenable = asc_in(port, ASC_INTEN) & ~ASC_INTEN_THE; + asc_out(port, ASC_INTEN, intenable); + (void)asc_in(port, ASC_INTEN); /* Defeat bus write posting */ +} + +static inline void asc_enable_tx_interrupts(struct uart_port *port) +{ + u32 intenable = asc_in(port, ASC_INTEN) | ASC_INTEN_THE; + asc_out(port, ASC_INTEN, intenable); +} + +static inline void asc_disable_rx_interrupts(struct uart_port *port) +{ + u32 intenable = asc_in(port, ASC_INTEN) & ~ASC_INTEN_RBE; + asc_out(port, ASC_INTEN, intenable); + (void)asc_in(port, ASC_INTEN); /* Defeat bus write posting */ +} + +static inline void asc_enable_rx_interrupts(struct uart_port *port) +{ + u32 intenable = asc_in(port, ASC_INTEN) | ASC_INTEN_RBE; + asc_out(port, ASC_INTEN, intenable); +} + +static inline u32 asc_txfifo_is_empty(struct uart_port *port) +{ + return asc_in(port, ASC_STA) & ASC_STA_TE; +} + +static inline u32 asc_txfifo_is_half_empty(struct uart_port *port) +{ + return asc_in(port, ASC_STA) & ASC_STA_THE; +} + +static inline const char *asc_port_name(struct uart_port *port) +{ + return to_platform_device(port->dev)->name; +} + +/*----------------------------------------------------------------------*/ + +/* + * This section contains code to support the use of the ASC as a + * generic serial port. + */ + +static inline unsigned asc_hw_txroom(struct uart_port *port) +{ + u32 status = asc_in(port, ASC_STA); + + if (status & ASC_STA_THE) + return port->fifosize / 2; + else if (!(status & ASC_STA_TF)) + return 1; + + return 0; +} + +/* + * Start transmitting chars. + * This is called from both interrupt and task level. + * Either way interrupts are disabled. + */ +static void asc_transmit_chars(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + int txroom; + unsigned char c; + + txroom = asc_hw_txroom(port); + + if ((txroom != 0) && port->x_char) { + c = port->x_char; + port->x_char = 0; + asc_out(port, ASC_TXBUF, c); + port->icount.tx++; + txroom = asc_hw_txroom(port); + } + + if (uart_tx_stopped(port)) { + /* + * We should try and stop the hardware here, but I + * don't think the ASC has any way to do that. + */ + asc_disable_tx_interrupts(port); + return; + } + + if (uart_circ_empty(xmit)) { + asc_disable_tx_interrupts(port); + return; + } + + if (txroom == 0) + return; + + do { + c = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + asc_out(port, ASC_TXBUF, c); + port->icount.tx++; + txroom--; + } while ((txroom > 0) && (!uart_circ_empty(xmit))); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + asc_disable_tx_interrupts(port); +} + +static void asc_receive_chars(struct uart_port *port) +{ + struct tty_port *tport = &port->state->port; + unsigned long status, mode; + unsigned long c = 0; + char flag; + bool ignore_pe = false; + + /* + * Datasheet states: If the MODE field selects an 8-bit frame then + * this [parity error] bit is undefined. Software should ignore this + * bit when reading 8-bit frames. + */ + mode = asc_in(port, ASC_CTL) & ASC_CTL_MODE_MSK; + if (mode == ASC_CTL_MODE_8BIT || mode == ASC_CTL_MODE_8BIT_PAR) + ignore_pe = true; + + if (irqd_is_wakeup_set(irq_get_irq_data(port->irq))) + pm_wakeup_event(tport->tty->dev, 0); + + while ((status = asc_in(port, ASC_STA)) & ASC_STA_RBF) { + c = asc_in(port, ASC_RXBUF) | ASC_RXBUF_DUMMY_RX; + flag = TTY_NORMAL; + port->icount.rx++; + + if (status & ASC_STA_OE || c & ASC_RXBUF_FE || + (c & ASC_RXBUF_PE && !ignore_pe)) { + + if (c & ASC_RXBUF_FE) { + if (c == (ASC_RXBUF_FE | ASC_RXBUF_DUMMY_RX)) { + port->icount.brk++; + if (uart_handle_break(port)) + continue; + c |= ASC_RXBUF_DUMMY_BE; + } else { + port->icount.frame++; + } + } else if (c & ASC_RXBUF_PE) { + port->icount.parity++; + } + /* + * Reading any data from the RX FIFO clears the + * overflow error condition. + */ + if (status & ASC_STA_OE) { + port->icount.overrun++; + c |= ASC_RXBUF_DUMMY_OE; + } + + c &= port->read_status_mask; + + if (c & ASC_RXBUF_DUMMY_BE) + flag = TTY_BREAK; + else if (c & ASC_RXBUF_PE) + flag = TTY_PARITY; + else if (c & ASC_RXBUF_FE) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(port, c & 0xff)) + continue; + + uart_insert_char(port, c, ASC_RXBUF_DUMMY_OE, c & 0xff, flag); + } + + /* Tell the rest of the system the news. New characters! */ + tty_flip_buffer_push(tport); +} + +static irqreturn_t asc_interrupt(int irq, void *ptr) +{ + struct uart_port *port = ptr; + u32 status; + + spin_lock(&port->lock); + + status = asc_in(port, ASC_STA); + + if (status & ASC_STA_RBF) { + /* Receive FIFO not empty */ + asc_receive_chars(port); + } + + if ((status & ASC_STA_THE) && + (asc_in(port, ASC_INTEN) & ASC_INTEN_THE)) { + /* Transmitter FIFO at least half empty */ + asc_transmit_chars(port); + } + + spin_unlock(&port->lock); + + return IRQ_HANDLED; +} + +/*----------------------------------------------------------------------*/ + +/* + * UART Functions + */ + +static unsigned int asc_tx_empty(struct uart_port *port) +{ + return asc_txfifo_is_empty(port) ? TIOCSER_TEMT : 0; +} + +static void asc_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct asc_port *ascport = to_asc_port(port); + + /* + * This routine is used for seting signals of: DTR, DCD, CTS and RTS. + * We use ASC's hardware for CTS/RTS when hardware flow-control is + * enabled, however if the RTS line is required for another purpose, + * commonly controlled using HUP from userspace, then we need to toggle + * it manually, using GPIO. + * + * Some boards also have DTR and DCD implemented using PIO pins, code to + * do this should be hooked in here. + */ + + if (!ascport->rts) + return; + + /* If HW flow-control is enabled, we can't fiddle with the RTS line */ + if (asc_in(port, ASC_CTL) & ASC_CTL_CTSENABLE) + return; + + gpiod_set_value(ascport->rts, mctrl & TIOCM_RTS); +} + +static unsigned int asc_get_mctrl(struct uart_port *port) +{ + /* + * This routine is used for geting signals of: DTR, DCD, DSR, RI, + * and CTS/RTS + */ + return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; +} + +/* There are probably characters waiting to be transmitted. */ +static void asc_start_tx(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + + if (!uart_circ_empty(xmit)) + asc_enable_tx_interrupts(port); +} + +/* Transmit stop */ +static void asc_stop_tx(struct uart_port *port) +{ + asc_disable_tx_interrupts(port); +} + +/* Receive stop */ +static void asc_stop_rx(struct uart_port *port) +{ + asc_disable_rx_interrupts(port); +} + +/* Handle breaks - ignored by us */ +static void asc_break_ctl(struct uart_port *port, int break_state) +{ + /* Nothing here yet .. */ +} + +/* + * Enable port for reception. + */ +static int asc_startup(struct uart_port *port) +{ + if (request_irq(port->irq, asc_interrupt, 0, + asc_port_name(port), port)) { + dev_err(port->dev, "cannot allocate irq.\n"); + return -ENODEV; + } + + asc_transmit_chars(port); + asc_enable_rx_interrupts(port); + + return 0; +} + +static void asc_shutdown(struct uart_port *port) +{ + asc_disable_tx_interrupts(port); + asc_disable_rx_interrupts(port); + free_irq(port->irq, port); +} + +static void asc_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct asc_port *ascport = to_asc_port(port); + unsigned long flags = 0; + u32 ctl; + + switch (state) { + case UART_PM_STATE_ON: + clk_prepare_enable(ascport->clk); + break; + case UART_PM_STATE_OFF: + /* + * Disable the ASC baud rate generator, which is as close as + * we can come to turning it off. Note this is not called with + * the port spinlock held. + */ + spin_lock_irqsave(&port->lock, flags); + ctl = asc_in(port, ASC_CTL) & ~ASC_CTL_RUN; + asc_out(port, ASC_CTL, ctl); + spin_unlock_irqrestore(&port->lock, flags); + clk_disable_unprepare(ascport->clk); + break; + } +} + +static void asc_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct asc_port *ascport = to_asc_port(port); + struct gpio_desc *gpiod; + unsigned int baud; + u32 ctrl_val; + tcflag_t cflag; + unsigned long flags; + + /* Update termios to reflect hardware capabilities */ + termios->c_cflag &= ~(CMSPAR | + (ascport->hw_flow_control ? 0 : CRTSCTS)); + + port->uartclk = clk_get_rate(ascport->clk); + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + cflag = termios->c_cflag; + + spin_lock_irqsave(&port->lock, flags); + + /* read control register */ + ctrl_val = asc_in(port, ASC_CTL); + + /* stop serial port and reset value */ + asc_out(port, ASC_CTL, (ctrl_val & ~ASC_CTL_RUN)); + ctrl_val = ASC_CTL_RXENABLE | ASC_CTL_FIFOENABLE; + + /* reset fifo rx & tx */ + asc_out(port, ASC_TXRESET, 1); + asc_out(port, ASC_RXRESET, 1); + + /* set character length */ + if ((cflag & CSIZE) == CS7) { + ctrl_val |= ASC_CTL_MODE_7BIT_PAR; + cflag |= PARENB; + } else { + ctrl_val |= (cflag & PARENB) ? ASC_CTL_MODE_8BIT_PAR : + ASC_CTL_MODE_8BIT; + cflag &= ~CSIZE; + cflag |= CS8; + } + termios->c_cflag = cflag; + + /* set stop bit */ + ctrl_val |= (cflag & CSTOPB) ? ASC_CTL_STOP_2BIT : ASC_CTL_STOP_1BIT; + + /* odd parity */ + if (cflag & PARODD) + ctrl_val |= ASC_CTL_PARITYODD; + + /* hardware flow control */ + if ((cflag & CRTSCTS)) { + ctrl_val |= ASC_CTL_CTSENABLE; + + /* If flow-control selected, stop handling RTS manually */ + if (ascport->rts) { + devm_gpiod_put(port->dev, ascport->rts); + ascport->rts = NULL; + + pinctrl_select_state(ascport->pinctrl, + ascport->states[DEFAULT]); + } + } else { + /* If flow-control disabled, it's safe to handle RTS manually */ + if (!ascport->rts && ascport->states[NO_HW_FLOWCTRL]) { + pinctrl_select_state(ascport->pinctrl, + ascport->states[NO_HW_FLOWCTRL]); + + gpiod = devm_gpiod_get(port->dev, "rts", GPIOD_OUT_LOW); + if (!IS_ERR(gpiod)) { + gpiod_set_consumer_name(gpiod, + port->dev->of_node->name); + ascport->rts = gpiod; + } + } + } + + if ((baud < 19200) && !ascport->force_m1) { + asc_out(port, ASC_BAUDRATE, (port->uartclk / (16 * baud))); + } else { + /* + * MODE 1: recommended for high bit rates (above 19.2K) + * + * baudrate * 16 * 2^16 + * ASCBaudRate = ------------------------ + * inputclock + * + * To keep maths inside 64bits, we divide inputclock by 16. + */ + u64 dividend = (u64)baud * (1 << 16); + + do_div(dividend, port->uartclk / 16); + asc_out(port, ASC_BAUDRATE, dividend); + ctrl_val |= ASC_CTL_BAUDMODE; + } + + uart_update_timeout(port, cflag, baud); + + ascport->port.read_status_mask = ASC_RXBUF_DUMMY_OE; + if (termios->c_iflag & INPCK) + ascport->port.read_status_mask |= ASC_RXBUF_FE | ASC_RXBUF_PE; + if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) + ascport->port.read_status_mask |= ASC_RXBUF_DUMMY_BE; + + /* + * Characters to ignore + */ + ascport->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + ascport->port.ignore_status_mask |= ASC_RXBUF_FE | ASC_RXBUF_PE; + if (termios->c_iflag & IGNBRK) { + ascport->port.ignore_status_mask |= ASC_RXBUF_DUMMY_BE; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + ascport->port.ignore_status_mask |= ASC_RXBUF_DUMMY_OE; + } + + /* + * Ignore all characters if CREAD is not set. + */ + if (!(termios->c_cflag & CREAD)) + ascport->port.ignore_status_mask |= ASC_RXBUF_DUMMY_RX; + + /* Set the timeout */ + asc_out(port, ASC_TIMEOUT, 20); + + /* write final value and enable port */ + asc_out(port, ASC_CTL, (ctrl_val | ASC_CTL_RUN)); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *asc_type(struct uart_port *port) +{ + return (port->type == PORT_ASC) ? DRIVER_NAME : NULL; +} + +static void asc_release_port(struct uart_port *port) +{ +} + +static int asc_request_port(struct uart_port *port) +{ + return 0; +} + +/* + * Called when the port is opened, and UPF_BOOT_AUTOCONF flag is set + * Set type field if successful + */ +static void asc_config_port(struct uart_port *port, int flags) +{ + if ((flags & UART_CONFIG_TYPE)) + port->type = PORT_ASC; +} + +static int +asc_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + /* No user changeable parameters */ + return -EINVAL; +} + +#ifdef CONFIG_CONSOLE_POLL +/* + * Console polling routines for writing and reading from the uart while + * in an interrupt or debug context (i.e. kgdb). + */ + +static int asc_get_poll_char(struct uart_port *port) +{ + if (!(asc_in(port, ASC_STA) & ASC_STA_RBF)) + return NO_POLL_CHAR; + + return asc_in(port, ASC_RXBUF); +} + +static void asc_put_poll_char(struct uart_port *port, unsigned char c) +{ + while (!asc_txfifo_is_half_empty(port)) + cpu_relax(); + asc_out(port, ASC_TXBUF, c); +} + +#endif /* CONFIG_CONSOLE_POLL */ + +/*---------------------------------------------------------------------*/ + +static const struct uart_ops asc_uart_ops = { + .tx_empty = asc_tx_empty, + .set_mctrl = asc_set_mctrl, + .get_mctrl = asc_get_mctrl, + .start_tx = asc_start_tx, + .stop_tx = asc_stop_tx, + .stop_rx = asc_stop_rx, + .break_ctl = asc_break_ctl, + .startup = asc_startup, + .shutdown = asc_shutdown, + .set_termios = asc_set_termios, + .type = asc_type, + .release_port = asc_release_port, + .request_port = asc_request_port, + .config_port = asc_config_port, + .verify_port = asc_verify_port, + .pm = asc_pm, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = asc_get_poll_char, + .poll_put_char = asc_put_poll_char, +#endif /* CONFIG_CONSOLE_POLL */ +}; + +static int asc_init_port(struct asc_port *ascport, + struct platform_device *pdev) +{ + struct uart_port *port = &ascport->port; + struct resource *res; + int ret; + + port->iotype = UPIO_MEM; + port->flags = UPF_BOOT_AUTOCONF; + port->ops = &asc_uart_ops; + port->fifosize = ASC_FIFO_SIZE; + port->dev = &pdev->dev; + port->irq = platform_get_irq(pdev, 0); + port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_ST_ASC_CONSOLE); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + port->membase = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(port->membase)) + return PTR_ERR(port->membase); + port->mapbase = res->start; + + spin_lock_init(&port->lock); + + ascport->clk = devm_clk_get(&pdev->dev, NULL); + + if (WARN_ON(IS_ERR(ascport->clk))) + return -EINVAL; + /* ensure that clk rate is correct by enabling the clk */ + clk_prepare_enable(ascport->clk); + ascport->port.uartclk = clk_get_rate(ascport->clk); + WARN_ON(ascport->port.uartclk == 0); + clk_disable_unprepare(ascport->clk); + + ascport->pinctrl = devm_pinctrl_get(&pdev->dev); + if (IS_ERR(ascport->pinctrl)) { + ret = PTR_ERR(ascport->pinctrl); + dev_err(&pdev->dev, "Failed to get Pinctrl: %d\n", ret); + return ret; + } + + ascport->states[DEFAULT] = + pinctrl_lookup_state(ascport->pinctrl, "default"); + if (IS_ERR(ascport->states[DEFAULT])) { + ret = PTR_ERR(ascport->states[DEFAULT]); + dev_err(&pdev->dev, + "Failed to look up Pinctrl state 'default': %d\n", ret); + return ret; + } + + /* "no-hw-flowctrl" state is optional */ + ascport->states[NO_HW_FLOWCTRL] = + pinctrl_lookup_state(ascport->pinctrl, "no-hw-flowctrl"); + if (IS_ERR(ascport->states[NO_HW_FLOWCTRL])) + ascport->states[NO_HW_FLOWCTRL] = NULL; + + return 0; +} + +static struct asc_port *asc_of_get_asc_port(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + int id; + + if (!np) + return NULL; + + id = of_alias_get_id(np, "serial"); + if (id < 0) + id = of_alias_get_id(np, ASC_SERIAL_NAME); + + if (id < 0) + id = 0; + + if (WARN_ON(id >= ASC_MAX_PORTS)) + return NULL; + + asc_ports[id].hw_flow_control = of_property_read_bool(np, + "uart-has-rtscts"); + asc_ports[id].force_m1 = of_property_read_bool(np, "st,force_m1"); + asc_ports[id].port.line = id; + asc_ports[id].rts = NULL; + + return &asc_ports[id]; +} + +#ifdef CONFIG_OF +static const struct of_device_id asc_match[] = { + { .compatible = "st,asc", }, + {}, +}; + +MODULE_DEVICE_TABLE(of, asc_match); +#endif + +static int asc_serial_probe(struct platform_device *pdev) +{ + int ret; + struct asc_port *ascport; + + ascport = asc_of_get_asc_port(pdev); + if (!ascport) + return -ENODEV; + + ret = asc_init_port(ascport, pdev); + if (ret) + return ret; + + ret = uart_add_one_port(&asc_uart_driver, &ascport->port); + if (ret) + return ret; + + platform_set_drvdata(pdev, &ascport->port); + + return 0; +} + +static int asc_serial_remove(struct platform_device *pdev) +{ + struct uart_port *port = platform_get_drvdata(pdev); + + return uart_remove_one_port(&asc_uart_driver, port); +} + +#ifdef CONFIG_PM_SLEEP +static int asc_serial_suspend(struct device *dev) +{ + struct uart_port *port = dev_get_drvdata(dev); + + return uart_suspend_port(&asc_uart_driver, port); +} + +static int asc_serial_resume(struct device *dev) +{ + struct uart_port *port = dev_get_drvdata(dev); + + return uart_resume_port(&asc_uart_driver, port); +} + +#endif /* CONFIG_PM_SLEEP */ + +/*----------------------------------------------------------------------*/ + +#ifdef CONFIG_SERIAL_ST_ASC_CONSOLE +static void asc_console_putchar(struct uart_port *port, int ch) +{ + unsigned int timeout = 1000000; + + /* Wait for upto 1 second in case flow control is stopping us. */ + while (--timeout && !asc_txfifo_is_half_empty(port)) + udelay(1); + + asc_out(port, ASC_TXBUF, ch); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + */ + +static void asc_console_write(struct console *co, const char *s, unsigned count) +{ + struct uart_port *port = &asc_ports[co->index].port; + unsigned long flags; + unsigned long timeout = 1000000; + int locked = 1; + u32 intenable; + + if (port->sysrq) + locked = 0; /* asc_interrupt has already claimed the lock */ + else if (oops_in_progress) + locked = spin_trylock_irqsave(&port->lock, flags); + else + spin_lock_irqsave(&port->lock, flags); + + /* + * Disable interrupts so we don't get the IRQ line bouncing + * up and down while interrupts are disabled. + */ + intenable = asc_in(port, ASC_INTEN); + asc_out(port, ASC_INTEN, 0); + (void)asc_in(port, ASC_INTEN); /* Defeat bus write posting */ + + uart_console_write(port, s, count, asc_console_putchar); + + while (--timeout && !asc_txfifo_is_empty(port)) + udelay(1); + + asc_out(port, ASC_INTEN, intenable); + + if (locked) + spin_unlock_irqrestore(&port->lock, flags); +} + +static int asc_console_setup(struct console *co, char *options) +{ + struct asc_port *ascport; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index >= ASC_MAX_PORTS) + return -ENODEV; + + ascport = &asc_ports[co->index]; + + /* + * This driver does not support early console initialization + * (use ARM early printk support instead), so we only expect + * this to be called during the uart port registration when the + * driver gets probed and the port should be mapped at that point. + */ + if (ascport->port.mapbase == 0 || ascport->port.membase == NULL) + return -ENXIO; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&ascport->port, co, baud, parity, bits, flow); +} + +static struct console asc_console = { + .name = ASC_SERIAL_NAME, + .device = uart_console_device, + .write = asc_console_write, + .setup = asc_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &asc_uart_driver, +}; + +#define ASC_SERIAL_CONSOLE (&asc_console) + +#else +#define ASC_SERIAL_CONSOLE NULL +#endif /* CONFIG_SERIAL_ST_ASC_CONSOLE */ + +static struct uart_driver asc_uart_driver = { + .owner = THIS_MODULE, + .driver_name = DRIVER_NAME, + .dev_name = ASC_SERIAL_NAME, + .major = 0, + .minor = 0, + .nr = ASC_MAX_PORTS, + .cons = ASC_SERIAL_CONSOLE, +}; + +static const struct dev_pm_ops asc_serial_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(asc_serial_suspend, asc_serial_resume) +}; + +static struct platform_driver asc_serial_driver = { + .probe = asc_serial_probe, + .remove = asc_serial_remove, + .driver = { + .name = DRIVER_NAME, + .pm = &asc_serial_pm_ops, + .of_match_table = of_match_ptr(asc_match), + }, +}; + +static int __init asc_init(void) +{ + int ret; + static const char banner[] __initconst = + KERN_INFO "STMicroelectronics ASC driver initialized\n"; + + printk(banner); + + ret = uart_register_driver(&asc_uart_driver); + if (ret) + return ret; + + ret = platform_driver_register(&asc_serial_driver); + if (ret) + uart_unregister_driver(&asc_uart_driver); + + return ret; +} + +static void __exit asc_exit(void) +{ + platform_driver_unregister(&asc_serial_driver); + uart_unregister_driver(&asc_uart_driver); +} + +module_init(asc_init); +module_exit(asc_exit); + +MODULE_ALIAS("platform:" DRIVER_NAME); +MODULE_AUTHOR("STMicroelectronics (R&D) Limited"); +MODULE_DESCRIPTION("STMicroelectronics ASC serial port driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c new file mode 100644 index 000000000..9377da1e9 --- /dev/null +++ b/drivers/tty/serial/stm32-usart.c @@ -0,0 +1,1637 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) Maxime Coquelin 2015 + * Copyright (C) STMicroelectronics SA 2017 + * Authors: Maxime Coquelin + * Gerald Baeza + * + * Inspired by st-asc.c from STMicroelectronics (c) + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "serial_mctrl_gpio.h" +#include "stm32-usart.h" + +static void stm32_usart_stop_tx(struct uart_port *port); +static void stm32_usart_transmit_chars(struct uart_port *port); + +static inline struct stm32_port *to_stm32_port(struct uart_port *port) +{ + return container_of(port, struct stm32_port, port); +} + +static void stm32_usart_set_bits(struct uart_port *port, u32 reg, u32 bits) +{ + u32 val; + + val = readl_relaxed(port->membase + reg); + val |= bits; + writel_relaxed(val, port->membase + reg); +} + +static void stm32_usart_clr_bits(struct uart_port *port, u32 reg, u32 bits) +{ + u32 val; + + val = readl_relaxed(port->membase + reg); + val &= ~bits; + writel_relaxed(val, port->membase + reg); +} + +static void stm32_usart_config_reg_rs485(u32 *cr1, u32 *cr3, u32 delay_ADE, + u32 delay_DDE, u32 baud) +{ + u32 rs485_deat_dedt; + u32 rs485_deat_dedt_max = (USART_CR1_DEAT_MASK >> USART_CR1_DEAT_SHIFT); + bool over8; + + *cr3 |= USART_CR3_DEM; + over8 = *cr1 & USART_CR1_OVER8; + + *cr1 &= ~(USART_CR1_DEDT_MASK | USART_CR1_DEAT_MASK); + + if (over8) + rs485_deat_dedt = delay_ADE * baud * 8; + else + rs485_deat_dedt = delay_ADE * baud * 16; + + rs485_deat_dedt = DIV_ROUND_CLOSEST(rs485_deat_dedt, 1000); + rs485_deat_dedt = rs485_deat_dedt > rs485_deat_dedt_max ? + rs485_deat_dedt_max : rs485_deat_dedt; + rs485_deat_dedt = (rs485_deat_dedt << USART_CR1_DEAT_SHIFT) & + USART_CR1_DEAT_MASK; + *cr1 |= rs485_deat_dedt; + + if (over8) + rs485_deat_dedt = delay_DDE * baud * 8; + else + rs485_deat_dedt = delay_DDE * baud * 16; + + rs485_deat_dedt = DIV_ROUND_CLOSEST(rs485_deat_dedt, 1000); + rs485_deat_dedt = rs485_deat_dedt > rs485_deat_dedt_max ? + rs485_deat_dedt_max : rs485_deat_dedt; + rs485_deat_dedt = (rs485_deat_dedt << USART_CR1_DEDT_SHIFT) & + USART_CR1_DEDT_MASK; + *cr1 |= rs485_deat_dedt; +} + +static int stm32_usart_config_rs485(struct uart_port *port, + struct serial_rs485 *rs485conf) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; + const struct stm32_usart_config *cfg = &stm32_port->info->cfg; + u32 usartdiv, baud, cr1, cr3; + bool over8; + + stm32_usart_clr_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit)); + + port->rs485 = *rs485conf; + + rs485conf->flags |= SER_RS485_RX_DURING_TX; + + if (rs485conf->flags & SER_RS485_ENABLED) { + cr1 = readl_relaxed(port->membase + ofs->cr1); + cr3 = readl_relaxed(port->membase + ofs->cr3); + usartdiv = readl_relaxed(port->membase + ofs->brr); + usartdiv = usartdiv & GENMASK(15, 0); + over8 = cr1 & USART_CR1_OVER8; + + if (over8) + usartdiv = usartdiv | (usartdiv & GENMASK(4, 0)) + << USART_BRR_04_R_SHIFT; + + baud = DIV_ROUND_CLOSEST(port->uartclk, usartdiv); + stm32_usart_config_reg_rs485(&cr1, &cr3, + rs485conf->delay_rts_before_send, + rs485conf->delay_rts_after_send, + baud); + + if (rs485conf->flags & SER_RS485_RTS_ON_SEND) { + cr3 &= ~USART_CR3_DEP; + rs485conf->flags &= ~SER_RS485_RTS_AFTER_SEND; + } else { + cr3 |= USART_CR3_DEP; + rs485conf->flags |= SER_RS485_RTS_AFTER_SEND; + } + + writel_relaxed(cr3, port->membase + ofs->cr3); + writel_relaxed(cr1, port->membase + ofs->cr1); + } else { + stm32_usart_clr_bits(port, ofs->cr3, + USART_CR3_DEM | USART_CR3_DEP); + stm32_usart_clr_bits(port, ofs->cr1, + USART_CR1_DEDT_MASK | USART_CR1_DEAT_MASK); + } + + stm32_usart_set_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit)); + + return 0; +} + +static int stm32_usart_init_rs485(struct uart_port *port, + struct platform_device *pdev) +{ + struct serial_rs485 *rs485conf = &port->rs485; + + rs485conf->flags = 0; + rs485conf->delay_rts_before_send = 0; + rs485conf->delay_rts_after_send = 0; + + if (!pdev->dev.of_node) + return -ENODEV; + + return uart_get_rs485_mode(port); +} + +static int stm32_usart_pending_rx(struct uart_port *port, u32 *sr, + int *last_res, bool threaded) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; + enum dma_status status; + struct dma_tx_state state; + + *sr = readl_relaxed(port->membase + ofs->isr); + + if (threaded && stm32_port->rx_ch) { + status = dmaengine_tx_status(stm32_port->rx_ch, + stm32_port->rx_ch->cookie, + &state); + if (status == DMA_IN_PROGRESS && (*last_res != state.residue)) + return 1; + else + return 0; + } else if (*sr & USART_SR_RXNE) { + return 1; + } + return 0; +} + +static unsigned long stm32_usart_get_char(struct uart_port *port, u32 *sr, + int *last_res) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; + unsigned long c; + + if (stm32_port->rx_ch) { + c = stm32_port->rx_buf[RX_BUF_L - (*last_res)--]; + if ((*last_res) == 0) + *last_res = RX_BUF_L; + } else { + c = readl_relaxed(port->membase + ofs->rdr); + /* apply RDR data mask */ + c &= stm32_port->rdr_mask; + } + + return c; +} + +static void stm32_usart_receive_chars(struct uart_port *port, bool threaded) +{ + struct tty_port *tport = &port->state->port; + struct stm32_port *stm32_port = to_stm32_port(port); + const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; + unsigned long c; + u32 sr; + char flag; + + spin_lock(&port->lock); + + while (stm32_usart_pending_rx(port, &sr, &stm32_port->last_res, + threaded)) { + sr |= USART_SR_DUMMY_RX; + flag = TTY_NORMAL; + + /* + * Status bits has to be cleared before reading the RDR: + * In FIFO mode, reading the RDR will pop the next data + * (if any) along with its status bits into the SR. + * Not doing so leads to misalignement between RDR and SR, + * and clear status bits of the next rx data. + * + * Clear errors flags for stm32f7 and stm32h7 compatible + * devices. On stm32f4 compatible devices, the error bit is + * cleared by the sequence [read SR - read DR]. + */ + if ((sr & USART_SR_ERR_MASK) && ofs->icr != UNDEF_REG) + writel_relaxed(sr & USART_SR_ERR_MASK, + port->membase + ofs->icr); + + c = stm32_usart_get_char(port, &sr, &stm32_port->last_res); + port->icount.rx++; + if (sr & USART_SR_ERR_MASK) { + if (sr & USART_SR_ORE) { + port->icount.overrun++; + } else if (sr & USART_SR_PE) { + port->icount.parity++; + } else if (sr & USART_SR_FE) { + /* Break detection if character is null */ + if (!c) { + port->icount.brk++; + if (uart_handle_break(port)) + continue; + } else { + port->icount.frame++; + } + } + + sr &= port->read_status_mask; + + if (sr & USART_SR_PE) { + flag = TTY_PARITY; + } else if (sr & USART_SR_FE) { + if (!c) + flag = TTY_BREAK; + else + flag = TTY_FRAME; + } + } + + if (uart_handle_sysrq_char(port, c)) + continue; + uart_insert_char(port, sr, USART_SR_ORE, c, flag); + } + + spin_unlock(&port->lock); + + tty_flip_buffer_push(tport); +} + +static void stm32_usart_tx_dma_complete(void *arg) +{ + struct uart_port *port = arg; + struct stm32_port *stm32port = to_stm32_port(port); + const struct stm32_usart_offsets *ofs = &stm32port->info->ofs; + unsigned long flags; + + dmaengine_terminate_async(stm32port->tx_ch); + stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT); + stm32port->tx_dma_busy = false; + + /* Let's see if we have pending data to send */ + spin_lock_irqsave(&port->lock, flags); + stm32_usart_transmit_chars(port); + spin_unlock_irqrestore(&port->lock, flags); +} + +static void stm32_usart_tx_interrupt_enable(struct uart_port *port) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; + + /* + * Enables TX FIFO threashold irq when FIFO is enabled, + * or TX empty irq when FIFO is disabled + */ + if (stm32_port->fifoen) + stm32_usart_set_bits(port, ofs->cr3, USART_CR3_TXFTIE); + else + stm32_usart_set_bits(port, ofs->cr1, USART_CR1_TXEIE); +} + +static void stm32_usart_tx_interrupt_disable(struct uart_port *port) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; + + if (stm32_port->fifoen) + stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_TXFTIE); + else + stm32_usart_clr_bits(port, ofs->cr1, USART_CR1_TXEIE); +} + +static void stm32_usart_transmit_chars_pio(struct uart_port *port) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; + struct circ_buf *xmit = &port->state->xmit; + + if (stm32_port->tx_dma_busy) { + stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT); + stm32_port->tx_dma_busy = false; + } + + while (!uart_circ_empty(xmit)) { + /* Check that TDR is empty before filling FIFO */ + if (!(readl_relaxed(port->membase + ofs->isr) & USART_SR_TXE)) + break; + writel_relaxed(xmit->buf[xmit->tail], port->membase + ofs->tdr); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + } + + /* rely on TXE irq (mask or unmask) for sending remaining data */ + if (uart_circ_empty(xmit)) + stm32_usart_tx_interrupt_disable(port); + else + stm32_usart_tx_interrupt_enable(port); +} + +static void stm32_usart_transmit_chars_dma(struct uart_port *port) +{ + struct stm32_port *stm32port = to_stm32_port(port); + const struct stm32_usart_offsets *ofs = &stm32port->info->ofs; + struct circ_buf *xmit = &port->state->xmit; + struct dma_async_tx_descriptor *desc = NULL; + unsigned int count, i; + + if (stm32port->tx_dma_busy) + return; + + stm32port->tx_dma_busy = true; + + count = uart_circ_chars_pending(xmit); + + if (count > TX_BUF_L) + count = TX_BUF_L; + + if (xmit->tail < xmit->head) { + memcpy(&stm32port->tx_buf[0], &xmit->buf[xmit->tail], count); + } else { + size_t one = UART_XMIT_SIZE - xmit->tail; + size_t two; + + if (one > count) + one = count; + two = count - one; + + memcpy(&stm32port->tx_buf[0], &xmit->buf[xmit->tail], one); + if (two) + memcpy(&stm32port->tx_buf[one], &xmit->buf[0], two); + } + + desc = dmaengine_prep_slave_single(stm32port->tx_ch, + stm32port->tx_dma_buf, + count, + DMA_MEM_TO_DEV, + DMA_PREP_INTERRUPT); + + if (!desc) + goto fallback_err; + + desc->callback = stm32_usart_tx_dma_complete; + desc->callback_param = port; + + /* Push current DMA TX transaction in the pending queue */ + if (dma_submit_error(dmaengine_submit(desc))) { + /* dma no yet started, safe to free resources */ + dmaengine_terminate_async(stm32port->tx_ch); + goto fallback_err; + } + + /* Issue pending DMA TX requests */ + dma_async_issue_pending(stm32port->tx_ch); + + stm32_usart_set_bits(port, ofs->cr3, USART_CR3_DMAT); + + xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1); + port->icount.tx += count; + return; + +fallback_err: + for (i = count; i > 0; i--) + stm32_usart_transmit_chars_pio(port); +} + +static void stm32_usart_transmit_chars(struct uart_port *port) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; + struct circ_buf *xmit = &port->state->xmit; + u32 isr; + int ret; + + if (port->x_char) { + if (stm32_port->tx_dma_busy) + stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT); + + /* Check that TDR is empty before filling FIFO */ + ret = + readl_relaxed_poll_timeout_atomic(port->membase + ofs->isr, + isr, + (isr & USART_SR_TXE), + 10, 1000); + if (ret) + dev_warn(port->dev, "1 character may be erased\n"); + + writel_relaxed(port->x_char, port->membase + ofs->tdr); + port->x_char = 0; + port->icount.tx++; + if (stm32_port->tx_dma_busy) + stm32_usart_set_bits(port, ofs->cr3, USART_CR3_DMAT); + return; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + stm32_usart_tx_interrupt_disable(port); + return; + } + + if (ofs->icr == UNDEF_REG) + stm32_usart_clr_bits(port, ofs->isr, USART_SR_TC); + else + writel_relaxed(USART_ICR_TCCF, port->membase + ofs->icr); + + if (stm32_port->tx_ch) + stm32_usart_transmit_chars_dma(port); + else + stm32_usart_transmit_chars_pio(port); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + stm32_usart_tx_interrupt_disable(port); +} + +static irqreturn_t stm32_usart_interrupt(int irq, void *ptr) +{ + struct uart_port *port = ptr; + struct tty_port *tport = &port->state->port; + struct stm32_port *stm32_port = to_stm32_port(port); + const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; + u32 sr; + + sr = readl_relaxed(port->membase + ofs->isr); + + if ((sr & USART_SR_RTOF) && ofs->icr != UNDEF_REG) + writel_relaxed(USART_ICR_RTOCF, + port->membase + ofs->icr); + + if ((sr & USART_SR_WUF) && ofs->icr != UNDEF_REG) { + /* Clear wake up flag and disable wake up interrupt */ + writel_relaxed(USART_ICR_WUCF, + port->membase + ofs->icr); + stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_WUFIE); + if (irqd_is_wakeup_set(irq_get_irq_data(port->irq))) + pm_wakeup_event(tport->tty->dev, 0); + } + + if ((sr & USART_SR_RXNE) && !(stm32_port->rx_ch)) + stm32_usart_receive_chars(port, false); + + if ((sr & USART_SR_TXE) && !(stm32_port->tx_ch)) { + spin_lock(&port->lock); + stm32_usart_transmit_chars(port); + spin_unlock(&port->lock); + } + + if (stm32_port->rx_ch) + return IRQ_WAKE_THREAD; + else + return IRQ_HANDLED; +} + +static irqreturn_t stm32_usart_threaded_interrupt(int irq, void *ptr) +{ + struct uart_port *port = ptr; + struct stm32_port *stm32_port = to_stm32_port(port); + + if (stm32_port->rx_ch) + stm32_usart_receive_chars(port, true); + + return IRQ_HANDLED; +} + +static unsigned int stm32_usart_tx_empty(struct uart_port *port) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; + + if (readl_relaxed(port->membase + ofs->isr) & USART_SR_TC) + return TIOCSER_TEMT; + + return 0; +} + +static void stm32_usart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; + + if ((mctrl & TIOCM_RTS) && (port->status & UPSTAT_AUTORTS)) + stm32_usart_set_bits(port, ofs->cr3, USART_CR3_RTSE); + else + stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_RTSE); + + mctrl_gpio_set(stm32_port->gpios, mctrl); +} + +static unsigned int stm32_usart_get_mctrl(struct uart_port *port) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + unsigned int ret; + + /* This routine is used to get signals of: DCD, DSR, RI, and CTS */ + ret = TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; + + return mctrl_gpio_get(stm32_port->gpios, &ret); +} + +static void stm32_usart_enable_ms(struct uart_port *port) +{ + mctrl_gpio_enable_ms(to_stm32_port(port)->gpios); +} + +static void stm32_usart_disable_ms(struct uart_port *port) +{ + mctrl_gpio_disable_ms(to_stm32_port(port)->gpios); +} + +/* Transmit stop */ +static void stm32_usart_stop_tx(struct uart_port *port) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + struct serial_rs485 *rs485conf = &port->rs485; + + stm32_usart_tx_interrupt_disable(port); + + if (rs485conf->flags & SER_RS485_ENABLED) { + if (rs485conf->flags & SER_RS485_RTS_ON_SEND) { + mctrl_gpio_set(stm32_port->gpios, + stm32_port->port.mctrl & ~TIOCM_RTS); + } else { + mctrl_gpio_set(stm32_port->gpios, + stm32_port->port.mctrl | TIOCM_RTS); + } + } +} + +/* There are probably characters waiting to be transmitted. */ +static void stm32_usart_start_tx(struct uart_port *port) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + struct serial_rs485 *rs485conf = &port->rs485; + struct circ_buf *xmit = &port->state->xmit; + + if (uart_circ_empty(xmit) && !port->x_char) + return; + + if (rs485conf->flags & SER_RS485_ENABLED) { + if (rs485conf->flags & SER_RS485_RTS_ON_SEND) { + mctrl_gpio_set(stm32_port->gpios, + stm32_port->port.mctrl | TIOCM_RTS); + } else { + mctrl_gpio_set(stm32_port->gpios, + stm32_port->port.mctrl & ~TIOCM_RTS); + } + } + + stm32_usart_transmit_chars(port); +} + +/* Throttle the remote when input buffer is about to overflow. */ +static void stm32_usart_throttle(struct uart_port *port) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + stm32_usart_clr_bits(port, ofs->cr1, stm32_port->cr1_irq); + if (stm32_port->cr3_irq) + stm32_usart_clr_bits(port, ofs->cr3, stm32_port->cr3_irq); + + spin_unlock_irqrestore(&port->lock, flags); +} + +/* Unthrottle the remote, the input buffer can now accept data. */ +static void stm32_usart_unthrottle(struct uart_port *port) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + stm32_usart_set_bits(port, ofs->cr1, stm32_port->cr1_irq); + if (stm32_port->cr3_irq) + stm32_usart_set_bits(port, ofs->cr3, stm32_port->cr3_irq); + + spin_unlock_irqrestore(&port->lock, flags); +} + +/* Receive stop */ +static void stm32_usart_stop_rx(struct uart_port *port) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; + + stm32_usart_clr_bits(port, ofs->cr1, stm32_port->cr1_irq); + if (stm32_port->cr3_irq) + stm32_usart_clr_bits(port, ofs->cr3, stm32_port->cr3_irq); +} + +/* Handle breaks - ignored by us */ +static void stm32_usart_break_ctl(struct uart_port *port, int break_state) +{ +} + +static int stm32_usart_startup(struct uart_port *port) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; + const struct stm32_usart_config *cfg = &stm32_port->info->cfg; + const char *name = to_platform_device(port->dev)->name; + u32 val; + int ret; + + ret = request_threaded_irq(port->irq, stm32_usart_interrupt, + stm32_usart_threaded_interrupt, + IRQF_ONESHOT | IRQF_NO_SUSPEND, + name, port); + if (ret) + return ret; + + /* RX FIFO Flush */ + if (ofs->rqr != UNDEF_REG) + writel_relaxed(USART_RQR_RXFRQ, port->membase + ofs->rqr); + + /* RX enabling */ + val = stm32_port->cr1_irq | USART_CR1_RE | BIT(cfg->uart_enable_bit); + stm32_usart_set_bits(port, ofs->cr1, val); + + return 0; +} + +static void stm32_usart_shutdown(struct uart_port *port) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; + const struct stm32_usart_config *cfg = &stm32_port->info->cfg; + u32 val, isr; + int ret; + + /* Disable modem control interrupts */ + stm32_usart_disable_ms(port); + + val = USART_CR1_TXEIE | USART_CR1_TE; + val |= stm32_port->cr1_irq | USART_CR1_RE; + val |= BIT(cfg->uart_enable_bit); + if (stm32_port->fifoen) + val |= USART_CR1_FIFOEN; + + ret = readl_relaxed_poll_timeout(port->membase + ofs->isr, + isr, (isr & USART_SR_TC), + 10, 100000); + + if (ret) + dev_err(port->dev, "transmission complete not set\n"); + + /* flush RX & TX FIFO */ + if (ofs->rqr != UNDEF_REG) + writel_relaxed(USART_RQR_TXFRQ | USART_RQR_RXFRQ, + port->membase + ofs->rqr); + + stm32_usart_clr_bits(port, ofs->cr1, val); + + free_irq(port->irq, port); +} + +static unsigned int stm32_usart_get_databits(struct ktermios *termios) +{ + unsigned int bits; + + tcflag_t cflag = termios->c_cflag; + + switch (cflag & CSIZE) { + /* + * CSIZE settings are not necessarily supported in hardware. + * CSIZE unsupported configurations are handled here to set word length + * to 8 bits word as default configuration and to print debug message. + */ + case CS5: + bits = 5; + break; + case CS6: + bits = 6; + break; + case CS7: + bits = 7; + break; + /* default including CS8 */ + default: + bits = 8; + break; + } + + return bits; +} + +static void stm32_usart_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; + const struct stm32_usart_config *cfg = &stm32_port->info->cfg; + struct serial_rs485 *rs485conf = &port->rs485; + unsigned int baud, bits; + u32 usartdiv, mantissa, fraction, oversampling; + tcflag_t cflag = termios->c_cflag; + u32 cr1, cr2, cr3, isr; + unsigned long flags; + int ret; + + if (!stm32_port->hw_flow_control) + cflag &= ~CRTSCTS; + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 8); + + spin_lock_irqsave(&port->lock, flags); + + ret = readl_relaxed_poll_timeout_atomic(port->membase + ofs->isr, + isr, + (isr & USART_SR_TC), + 10, 100000); + + /* Send the TC error message only when ISR_TC is not set. */ + if (ret) + dev_err(port->dev, "Transmission is not complete\n"); + + /* Stop serial port and reset value */ + writel_relaxed(0, port->membase + ofs->cr1); + + /* flush RX & TX FIFO */ + if (ofs->rqr != UNDEF_REG) + writel_relaxed(USART_RQR_TXFRQ | USART_RQR_RXFRQ, + port->membase + ofs->rqr); + + cr1 = USART_CR1_TE | USART_CR1_RE; + if (stm32_port->fifoen) + cr1 |= USART_CR1_FIFOEN; + cr2 = 0; + + /* Tx and RX FIFO configuration */ + cr3 = readl_relaxed(port->membase + ofs->cr3); + cr3 &= USART_CR3_TXFTIE | USART_CR3_RXFTIE; + if (stm32_port->fifoen) { + cr3 &= ~(USART_CR3_TXFTCFG_MASK | USART_CR3_RXFTCFG_MASK); + cr3 |= USART_CR3_TXFTCFG_HALF << USART_CR3_TXFTCFG_SHIFT; + cr3 |= USART_CR3_RXFTCFG_HALF << USART_CR3_RXFTCFG_SHIFT; + } + + if (cflag & CSTOPB) + cr2 |= USART_CR2_STOP_2B; + + bits = stm32_usart_get_databits(termios); + stm32_port->rdr_mask = (BIT(bits) - 1); + + if (cflag & PARENB) { + bits++; + cr1 |= USART_CR1_PCE; + } + + /* + * Word length configuration: + * CS8 + parity, 9 bits word aka [M1:M0] = 0b01 + * CS7 or (CS6 + parity), 7 bits word aka [M1:M0] = 0b10 + * CS8 or (CS7 + parity), 8 bits word aka [M1:M0] = 0b00 + * M0 and M1 already cleared by cr1 initialization. + */ + if (bits == 9) { + cr1 |= USART_CR1_M0; + } else if ((bits == 7) && cfg->has_7bits_data) { + cr1 |= USART_CR1_M1; + } else if (bits != 8) { + dev_dbg(port->dev, "Unsupported data bits config: %u bits\n" + , bits); + cflag &= ~CSIZE; + cflag |= CS8; + termios->c_cflag = cflag; + bits = 8; + if (cflag & PARENB) { + bits++; + cr1 |= USART_CR1_M0; + } + } + + if (ofs->rtor != UNDEF_REG && (stm32_port->rx_ch || + stm32_port->fifoen)) { + if (cflag & CSTOPB) + bits = bits + 3; /* 1 start bit + 2 stop bits */ + else + bits = bits + 2; /* 1 start bit + 1 stop bit */ + + /* RX timeout irq to occur after last stop bit + bits */ + stm32_port->cr1_irq = USART_CR1_RTOIE; + writel_relaxed(bits, port->membase + ofs->rtor); + cr2 |= USART_CR2_RTOEN; + /* Not using dma, enable fifo threshold irq */ + if (!stm32_port->rx_ch) + stm32_port->cr3_irq = USART_CR3_RXFTIE; + } + + cr1 |= stm32_port->cr1_irq; + cr3 |= stm32_port->cr3_irq; + + if (cflag & PARODD) + cr1 |= USART_CR1_PS; + + port->status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS); + if (cflag & CRTSCTS) { + port->status |= UPSTAT_AUTOCTS | UPSTAT_AUTORTS; + cr3 |= USART_CR3_CTSE | USART_CR3_RTSE; + } + + usartdiv = DIV_ROUND_CLOSEST(port->uartclk, baud); + + /* + * The USART supports 16 or 8 times oversampling. + * By default we prefer 16 times oversampling, so that the receiver + * has a better tolerance to clock deviations. + * 8 times oversampling is only used to achieve higher speeds. + */ + if (usartdiv < 16) { + oversampling = 8; + cr1 |= USART_CR1_OVER8; + stm32_usart_set_bits(port, ofs->cr1, USART_CR1_OVER8); + } else { + oversampling = 16; + cr1 &= ~USART_CR1_OVER8; + stm32_usart_clr_bits(port, ofs->cr1, USART_CR1_OVER8); + } + + mantissa = (usartdiv / oversampling) << USART_BRR_DIV_M_SHIFT; + fraction = usartdiv % oversampling; + writel_relaxed(mantissa | fraction, port->membase + ofs->brr); + + uart_update_timeout(port, cflag, baud); + + port->read_status_mask = USART_SR_ORE; + if (termios->c_iflag & INPCK) + port->read_status_mask |= USART_SR_PE | USART_SR_FE; + if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) + port->read_status_mask |= USART_SR_FE; + + /* Characters to ignore */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask = USART_SR_PE | USART_SR_FE; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= USART_SR_FE; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= USART_SR_ORE; + } + + /* Ignore all characters if CREAD is not set */ + if ((termios->c_cflag & CREAD) == 0) + port->ignore_status_mask |= USART_SR_DUMMY_RX; + + if (stm32_port->rx_ch) + cr3 |= USART_CR3_DMAR; + + if (rs485conf->flags & SER_RS485_ENABLED) { + stm32_usart_config_reg_rs485(&cr1, &cr3, + rs485conf->delay_rts_before_send, + rs485conf->delay_rts_after_send, + baud); + if (rs485conf->flags & SER_RS485_RTS_ON_SEND) { + cr3 &= ~USART_CR3_DEP; + rs485conf->flags &= ~SER_RS485_RTS_AFTER_SEND; + } else { + cr3 |= USART_CR3_DEP; + rs485conf->flags |= SER_RS485_RTS_AFTER_SEND; + } + + } else { + cr3 &= ~(USART_CR3_DEM | USART_CR3_DEP); + cr1 &= ~(USART_CR1_DEDT_MASK | USART_CR1_DEAT_MASK); + } + + /* Configure wake up from low power on start bit detection */ + if (stm32_port->wakeirq > 0) { + cr3 &= ~USART_CR3_WUS_MASK; + cr3 |= USART_CR3_WUS_START_BIT; + } + + writel_relaxed(cr3, port->membase + ofs->cr3); + writel_relaxed(cr2, port->membase + ofs->cr2); + writel_relaxed(cr1, port->membase + ofs->cr1); + + stm32_usart_set_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit)); + spin_unlock_irqrestore(&port->lock, flags); + + /* Handle modem control interrupts */ + if (UART_ENABLE_MS(port, termios->c_cflag)) + stm32_usart_enable_ms(port); + else + stm32_usart_disable_ms(port); +} + +static const char *stm32_usart_type(struct uart_port *port) +{ + return (port->type == PORT_STM32) ? DRIVER_NAME : NULL; +} + +static void stm32_usart_release_port(struct uart_port *port) +{ +} + +static int stm32_usart_request_port(struct uart_port *port) +{ + return 0; +} + +static void stm32_usart_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) + port->type = PORT_STM32; +} + +static int +stm32_usart_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + /* No user changeable parameters */ + return -EINVAL; +} + +static void stm32_usart_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct stm32_port *stm32port = container_of(port, + struct stm32_port, port); + const struct stm32_usart_offsets *ofs = &stm32port->info->ofs; + const struct stm32_usart_config *cfg = &stm32port->info->cfg; + unsigned long flags = 0; + + switch (state) { + case UART_PM_STATE_ON: + pm_runtime_get_sync(port->dev); + break; + case UART_PM_STATE_OFF: + spin_lock_irqsave(&port->lock, flags); + stm32_usart_clr_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit)); + spin_unlock_irqrestore(&port->lock, flags); + pm_runtime_put_sync(port->dev); + break; + } +} + +static const struct uart_ops stm32_uart_ops = { + .tx_empty = stm32_usart_tx_empty, + .set_mctrl = stm32_usart_set_mctrl, + .get_mctrl = stm32_usart_get_mctrl, + .stop_tx = stm32_usart_stop_tx, + .start_tx = stm32_usart_start_tx, + .throttle = stm32_usart_throttle, + .unthrottle = stm32_usart_unthrottle, + .stop_rx = stm32_usart_stop_rx, + .enable_ms = stm32_usart_enable_ms, + .break_ctl = stm32_usart_break_ctl, + .startup = stm32_usart_startup, + .shutdown = stm32_usart_shutdown, + .set_termios = stm32_usart_set_termios, + .pm = stm32_usart_pm, + .type = stm32_usart_type, + .release_port = stm32_usart_release_port, + .request_port = stm32_usart_request_port, + .config_port = stm32_usart_config_port, + .verify_port = stm32_usart_verify_port, +}; + +static int stm32_usart_init_port(struct stm32_port *stm32port, + struct platform_device *pdev) +{ + struct uart_port *port = &stm32port->port; + struct resource *res; + int ret; + + ret = platform_get_irq(pdev, 0); + if (ret <= 0) + return ret ? : -ENODEV; + + port->iotype = UPIO_MEM; + port->flags = UPF_BOOT_AUTOCONF; + port->ops = &stm32_uart_ops; + port->dev = &pdev->dev; + port->fifosize = stm32port->info->cfg.fifosize; + port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_STM32_CONSOLE); + port->irq = ret; + port->rs485_config = stm32_usart_config_rs485; + + ret = stm32_usart_init_rs485(port, pdev); + if (ret) + return ret; + + if (stm32port->info->cfg.has_wakeup) { + stm32port->wakeirq = platform_get_irq_optional(pdev, 1); + if (stm32port->wakeirq <= 0 && stm32port->wakeirq != -ENXIO) + return stm32port->wakeirq ? : -ENODEV; + } + + stm32port->fifoen = stm32port->info->cfg.has_fifo; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + port->membase = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(port->membase)) + return PTR_ERR(port->membase); + port->mapbase = res->start; + + spin_lock_init(&port->lock); + + stm32port->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(stm32port->clk)) + return PTR_ERR(stm32port->clk); + + /* Ensure that clk rate is correct by enabling the clk */ + ret = clk_prepare_enable(stm32port->clk); + if (ret) + return ret; + + stm32port->port.uartclk = clk_get_rate(stm32port->clk); + if (!stm32port->port.uartclk) { + ret = -EINVAL; + goto err_clk; + } + + stm32port->gpios = mctrl_gpio_init(&stm32port->port, 0); + if (IS_ERR(stm32port->gpios)) { + ret = PTR_ERR(stm32port->gpios); + goto err_clk; + } + + /* Both CTS/RTS gpios and "st,hw-flow-ctrl" should not be specified */ + if (stm32port->hw_flow_control) { + if (mctrl_gpio_to_gpiod(stm32port->gpios, UART_GPIO_CTS) || + mctrl_gpio_to_gpiod(stm32port->gpios, UART_GPIO_RTS)) { + dev_err(&pdev->dev, "Conflicting RTS/CTS config\n"); + ret = -EINVAL; + goto err_clk; + } + } + + return ret; + +err_clk: + clk_disable_unprepare(stm32port->clk); + + return ret; +} + +static struct stm32_port *stm32_usart_of_get_port(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + int id; + + if (!np) + return NULL; + + id = of_alias_get_id(np, "serial"); + if (id < 0) { + dev_err(&pdev->dev, "failed to get alias id, errno %d\n", id); + return NULL; + } + + if (WARN_ON(id >= STM32_MAX_PORTS)) + return NULL; + + stm32_ports[id].hw_flow_control = + of_property_read_bool (np, "st,hw-flow-ctrl") /*deprecated*/ || + of_property_read_bool (np, "uart-has-rtscts"); + stm32_ports[id].port.line = id; + stm32_ports[id].cr1_irq = USART_CR1_RXNEIE; + stm32_ports[id].cr3_irq = 0; + stm32_ports[id].last_res = RX_BUF_L; + return &stm32_ports[id]; +} + +#ifdef CONFIG_OF +static const struct of_device_id stm32_match[] = { + { .compatible = "st,stm32-uart", .data = &stm32f4_info}, + { .compatible = "st,stm32f7-uart", .data = &stm32f7_info}, + { .compatible = "st,stm32h7-uart", .data = &stm32h7_info}, + {}, +}; + +MODULE_DEVICE_TABLE(of, stm32_match); +#endif + +static int stm32_usart_of_dma_rx_probe(struct stm32_port *stm32port, + struct platform_device *pdev) +{ + const struct stm32_usart_offsets *ofs = &stm32port->info->ofs; + struct uart_port *port = &stm32port->port; + struct device *dev = &pdev->dev; + struct dma_slave_config config; + struct dma_async_tx_descriptor *desc = NULL; + int ret; + + /* + * Using DMA and threaded handler for the console could lead to + * deadlocks. + */ + if (uart_console(port)) + return -ENODEV; + + /* Request DMA RX channel */ + stm32port->rx_ch = dma_request_slave_channel(dev, "rx"); + if (!stm32port->rx_ch) { + dev_info(dev, "rx dma alloc failed\n"); + return -ENODEV; + } + stm32port->rx_buf = dma_alloc_coherent(&pdev->dev, RX_BUF_L, + &stm32port->rx_dma_buf, + GFP_KERNEL); + if (!stm32port->rx_buf) { + ret = -ENOMEM; + goto alloc_err; + } + + /* Configure DMA channel */ + memset(&config, 0, sizeof(config)); + config.src_addr = port->mapbase + ofs->rdr; + config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + + ret = dmaengine_slave_config(stm32port->rx_ch, &config); + if (ret < 0) { + dev_err(dev, "rx dma channel config failed\n"); + ret = -ENODEV; + goto config_err; + } + + /* Prepare a DMA cyclic transaction */ + desc = dmaengine_prep_dma_cyclic(stm32port->rx_ch, + stm32port->rx_dma_buf, + RX_BUF_L, RX_BUF_P, DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT); + if (!desc) { + dev_err(dev, "rx dma prep cyclic failed\n"); + ret = -ENODEV; + goto config_err; + } + + /* No callback as dma buffer is drained on usart interrupt */ + desc->callback = NULL; + desc->callback_param = NULL; + + /* Push current DMA transaction in the pending queue */ + ret = dma_submit_error(dmaengine_submit(desc)); + if (ret) { + dmaengine_terminate_sync(stm32port->rx_ch); + goto config_err; + } + + /* Issue pending DMA requests */ + dma_async_issue_pending(stm32port->rx_ch); + + return 0; + +config_err: + dma_free_coherent(&pdev->dev, + RX_BUF_L, stm32port->rx_buf, + stm32port->rx_dma_buf); + +alloc_err: + dma_release_channel(stm32port->rx_ch); + stm32port->rx_ch = NULL; + + return ret; +} + +static int stm32_usart_of_dma_tx_probe(struct stm32_port *stm32port, + struct platform_device *pdev) +{ + const struct stm32_usart_offsets *ofs = &stm32port->info->ofs; + struct uart_port *port = &stm32port->port; + struct device *dev = &pdev->dev; + struct dma_slave_config config; + int ret; + + stm32port->tx_dma_busy = false; + + /* Request DMA TX channel */ + stm32port->tx_ch = dma_request_slave_channel(dev, "tx"); + if (!stm32port->tx_ch) { + dev_info(dev, "tx dma alloc failed\n"); + return -ENODEV; + } + stm32port->tx_buf = dma_alloc_coherent(&pdev->dev, TX_BUF_L, + &stm32port->tx_dma_buf, + GFP_KERNEL); + if (!stm32port->tx_buf) { + ret = -ENOMEM; + goto alloc_err; + } + + /* Configure DMA channel */ + memset(&config, 0, sizeof(config)); + config.dst_addr = port->mapbase + ofs->tdr; + config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + + ret = dmaengine_slave_config(stm32port->tx_ch, &config); + if (ret < 0) { + dev_err(dev, "tx dma channel config failed\n"); + ret = -ENODEV; + goto config_err; + } + + return 0; + +config_err: + dma_free_coherent(&pdev->dev, + TX_BUF_L, stm32port->tx_buf, + stm32port->tx_dma_buf); + +alloc_err: + dma_release_channel(stm32port->tx_ch); + stm32port->tx_ch = NULL; + + return ret; +} + +static int stm32_usart_serial_probe(struct platform_device *pdev) +{ + struct stm32_port *stm32port; + int ret; + + stm32port = stm32_usart_of_get_port(pdev); + if (!stm32port) + return -ENODEV; + + stm32port->info = of_device_get_match_data(&pdev->dev); + if (!stm32port->info) + return -EINVAL; + + ret = stm32_usart_init_port(stm32port, pdev); + if (ret) + return ret; + + if (stm32port->wakeirq > 0) { + ret = device_init_wakeup(&pdev->dev, true); + if (ret) + goto err_uninit; + + ret = dev_pm_set_dedicated_wake_irq(&pdev->dev, + stm32port->wakeirq); + if (ret) + goto err_nowup; + + device_set_wakeup_enable(&pdev->dev, false); + } + + ret = stm32_usart_of_dma_rx_probe(stm32port, pdev); + if (ret) + dev_info(&pdev->dev, "interrupt mode used for rx (no dma)\n"); + + ret = stm32_usart_of_dma_tx_probe(stm32port, pdev); + if (ret) + dev_info(&pdev->dev, "interrupt mode used for tx (no dma)\n"); + + platform_set_drvdata(pdev, &stm32port->port); + + pm_runtime_get_noresume(&pdev->dev); + pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); + + ret = uart_add_one_port(&stm32_usart_driver, &stm32port->port); + if (ret) + goto err_port; + + pm_runtime_put_sync(&pdev->dev); + + return 0; + +err_port: + pm_runtime_disable(&pdev->dev); + pm_runtime_set_suspended(&pdev->dev); + pm_runtime_put_noidle(&pdev->dev); + + if (stm32port->rx_ch) { + dmaengine_terminate_async(stm32port->rx_ch); + dma_release_channel(stm32port->rx_ch); + } + + if (stm32port->rx_dma_buf) + dma_free_coherent(&pdev->dev, + RX_BUF_L, stm32port->rx_buf, + stm32port->rx_dma_buf); + + if (stm32port->tx_ch) { + dmaengine_terminate_async(stm32port->tx_ch); + dma_release_channel(stm32port->tx_ch); + } + + if (stm32port->tx_dma_buf) + dma_free_coherent(&pdev->dev, + TX_BUF_L, stm32port->tx_buf, + stm32port->tx_dma_buf); + + if (stm32port->wakeirq > 0) + dev_pm_clear_wake_irq(&pdev->dev); + +err_nowup: + if (stm32port->wakeirq > 0) + device_init_wakeup(&pdev->dev, false); + +err_uninit: + clk_disable_unprepare(stm32port->clk); + + return ret; +} + +static int stm32_usart_serial_remove(struct platform_device *pdev) +{ + struct uart_port *port = platform_get_drvdata(pdev); + struct stm32_port *stm32_port = to_stm32_port(port); + const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; + int err; + + pm_runtime_get_sync(&pdev->dev); + err = uart_remove_one_port(&stm32_usart_driver, port); + if (err) + return(err); + + pm_runtime_disable(&pdev->dev); + pm_runtime_set_suspended(&pdev->dev); + pm_runtime_put_noidle(&pdev->dev); + + stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAR); + + if (stm32_port->rx_ch) { + dmaengine_terminate_async(stm32_port->rx_ch); + dma_release_channel(stm32_port->rx_ch); + } + + if (stm32_port->rx_dma_buf) + dma_free_coherent(&pdev->dev, + RX_BUF_L, stm32_port->rx_buf, + stm32_port->rx_dma_buf); + + stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT); + + if (stm32_port->tx_ch) { + dmaengine_terminate_async(stm32_port->tx_ch); + dma_release_channel(stm32_port->tx_ch); + } + + if (stm32_port->tx_dma_buf) + dma_free_coherent(&pdev->dev, + TX_BUF_L, stm32_port->tx_buf, + stm32_port->tx_dma_buf); + + if (stm32_port->wakeirq > 0) { + dev_pm_clear_wake_irq(&pdev->dev); + device_init_wakeup(&pdev->dev, false); + } + + clk_disable_unprepare(stm32_port->clk); + + return 0; +} + +#ifdef CONFIG_SERIAL_STM32_CONSOLE +static void stm32_usart_console_putchar(struct uart_port *port, int ch) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; + + while (!(readl_relaxed(port->membase + ofs->isr) & USART_SR_TXE)) + cpu_relax(); + + writel_relaxed(ch, port->membase + ofs->tdr); +} + +static void stm32_usart_console_write(struct console *co, const char *s, + unsigned int cnt) +{ + struct uart_port *port = &stm32_ports[co->index].port; + struct stm32_port *stm32_port = to_stm32_port(port); + const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; + const struct stm32_usart_config *cfg = &stm32_port->info->cfg; + unsigned long flags; + u32 old_cr1, new_cr1; + int locked = 1; + + local_irq_save(flags); + if (port->sysrq) + locked = 0; + else if (oops_in_progress) + locked = spin_trylock(&port->lock); + else + spin_lock(&port->lock); + + /* Save and disable interrupts, enable the transmitter */ + old_cr1 = readl_relaxed(port->membase + ofs->cr1); + new_cr1 = old_cr1 & ~USART_CR1_IE_MASK; + new_cr1 |= USART_CR1_TE | BIT(cfg->uart_enable_bit); + writel_relaxed(new_cr1, port->membase + ofs->cr1); + + uart_console_write(port, s, cnt, stm32_usart_console_putchar); + + /* Restore interrupt state */ + writel_relaxed(old_cr1, port->membase + ofs->cr1); + + if (locked) + spin_unlock(&port->lock); + local_irq_restore(flags); +} + +static int stm32_usart_console_setup(struct console *co, char *options) +{ + struct stm32_port *stm32port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index >= STM32_MAX_PORTS) + return -ENODEV; + + stm32port = &stm32_ports[co->index]; + + /* + * This driver does not support early console initialization + * (use ARM early printk support instead), so we only expect + * this to be called during the uart port registration when the + * driver gets probed and the port should be mapped at that point. + */ + if (stm32port->port.mapbase == 0 || !stm32port->port.membase) + return -ENXIO; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&stm32port->port, co, baud, parity, bits, flow); +} + +static struct console stm32_console = { + .name = STM32_SERIAL_NAME, + .device = uart_console_device, + .write = stm32_usart_console_write, + .setup = stm32_usart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &stm32_usart_driver, +}; + +#define STM32_SERIAL_CONSOLE (&stm32_console) + +#else +#define STM32_SERIAL_CONSOLE NULL +#endif /* CONFIG_SERIAL_STM32_CONSOLE */ + +static struct uart_driver stm32_usart_driver = { + .driver_name = DRIVER_NAME, + .dev_name = STM32_SERIAL_NAME, + .major = 0, + .minor = 0, + .nr = STM32_MAX_PORTS, + .cons = STM32_SERIAL_CONSOLE, +}; + +static void __maybe_unused stm32_usart_serial_en_wakeup(struct uart_port *port, + bool enable) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; + + if (stm32_port->wakeirq <= 0) + return; + + /* + * Enable low-power wake-up and wake-up irq if argument is set to + * "enable", disable low-power wake-up and wake-up irq otherwise + */ + if (enable) { + stm32_usart_set_bits(port, ofs->cr1, USART_CR1_UESM); + stm32_usart_set_bits(port, ofs->cr3, USART_CR3_WUFIE); + } else { + stm32_usart_clr_bits(port, ofs->cr1, USART_CR1_UESM); + stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_WUFIE); + } +} + +static int __maybe_unused stm32_usart_serial_suspend(struct device *dev) +{ + struct uart_port *port = dev_get_drvdata(dev); + + uart_suspend_port(&stm32_usart_driver, port); + + if (device_may_wakeup(dev)) + stm32_usart_serial_en_wakeup(port, true); + else + stm32_usart_serial_en_wakeup(port, false); + + /* + * When "no_console_suspend" is enabled, keep the pinctrl default state + * and rely on bootloader stage to restore this state upon resume. + * Otherwise, apply the idle or sleep states depending on wakeup + * capabilities. + */ + if (console_suspend_enabled || !uart_console(port)) { + if (device_may_wakeup(dev)) + pinctrl_pm_select_idle_state(dev); + else + pinctrl_pm_select_sleep_state(dev); + } + + return 0; +} + +static int __maybe_unused stm32_usart_serial_resume(struct device *dev) +{ + struct uart_port *port = dev_get_drvdata(dev); + + pinctrl_pm_select_default_state(dev); + + if (device_may_wakeup(dev)) + stm32_usart_serial_en_wakeup(port, false); + + return uart_resume_port(&stm32_usart_driver, port); +} + +static int __maybe_unused stm32_usart_runtime_suspend(struct device *dev) +{ + struct uart_port *port = dev_get_drvdata(dev); + struct stm32_port *stm32port = container_of(port, + struct stm32_port, port); + + clk_disable_unprepare(stm32port->clk); + + return 0; +} + +static int __maybe_unused stm32_usart_runtime_resume(struct device *dev) +{ + struct uart_port *port = dev_get_drvdata(dev); + struct stm32_port *stm32port = container_of(port, + struct stm32_port, port); + + return clk_prepare_enable(stm32port->clk); +} + +static const struct dev_pm_ops stm32_serial_pm_ops = { + SET_RUNTIME_PM_OPS(stm32_usart_runtime_suspend, + stm32_usart_runtime_resume, NULL) + SET_SYSTEM_SLEEP_PM_OPS(stm32_usart_serial_suspend, + stm32_usart_serial_resume) +}; + +static struct platform_driver stm32_serial_driver = { + .probe = stm32_usart_serial_probe, + .remove = stm32_usart_serial_remove, + .driver = { + .name = DRIVER_NAME, + .pm = &stm32_serial_pm_ops, + .of_match_table = of_match_ptr(stm32_match), + }, +}; + +static int __init stm32_usart_init(void) +{ + static char banner[] __initdata = "STM32 USART driver initialized"; + int ret; + + pr_info("%s\n", banner); + + ret = uart_register_driver(&stm32_usart_driver); + if (ret) + return ret; + + ret = platform_driver_register(&stm32_serial_driver); + if (ret) + uart_unregister_driver(&stm32_usart_driver); + + return ret; +} + +static void __exit stm32_usart_exit(void) +{ + platform_driver_unregister(&stm32_serial_driver); + uart_unregister_driver(&stm32_usart_driver); +} + +module_init(stm32_usart_init); +module_exit(stm32_usart_exit); + +MODULE_ALIAS("platform:" DRIVER_NAME); +MODULE_DESCRIPTION("STMicroelectronics STM32 serial port driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/stm32-usart.h b/drivers/tty/serial/stm32-usart.h new file mode 100644 index 000000000..94b568aa4 --- /dev/null +++ b/drivers/tty/serial/stm32-usart.h @@ -0,0 +1,278 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) Maxime Coquelin 2015 + * Copyright (C) STMicroelectronics SA 2017 + * Authors: Maxime Coquelin + * Gerald Baeza + */ + +#define DRIVER_NAME "stm32-usart" + +struct stm32_usart_offsets { + u8 cr1; + u8 cr2; + u8 cr3; + u8 brr; + u8 gtpr; + u8 rtor; + u8 rqr; + u8 isr; + u8 icr; + u8 rdr; + u8 tdr; +}; + +struct stm32_usart_config { + u8 uart_enable_bit; /* USART_CR1_UE */ + bool has_7bits_data; + bool has_wakeup; + bool has_fifo; + int fifosize; +}; + +struct stm32_usart_info { + struct stm32_usart_offsets ofs; + struct stm32_usart_config cfg; +}; + +#define UNDEF_REG 0xff + +/* Register offsets */ +struct stm32_usart_info stm32f4_info = { + .ofs = { + .isr = 0x00, + .rdr = 0x04, + .tdr = 0x04, + .brr = 0x08, + .cr1 = 0x0c, + .cr2 = 0x10, + .cr3 = 0x14, + .gtpr = 0x18, + .rtor = UNDEF_REG, + .rqr = UNDEF_REG, + .icr = UNDEF_REG, + }, + .cfg = { + .uart_enable_bit = 13, + .has_7bits_data = false, + .fifosize = 1, + } +}; + +struct stm32_usart_info stm32f7_info = { + .ofs = { + .cr1 = 0x00, + .cr2 = 0x04, + .cr3 = 0x08, + .brr = 0x0c, + .gtpr = 0x10, + .rtor = 0x14, + .rqr = 0x18, + .isr = 0x1c, + .icr = 0x20, + .rdr = 0x24, + .tdr = 0x28, + }, + .cfg = { + .uart_enable_bit = 0, + .has_7bits_data = true, + .fifosize = 1, + } +}; + +struct stm32_usart_info stm32h7_info = { + .ofs = { + .cr1 = 0x00, + .cr2 = 0x04, + .cr3 = 0x08, + .brr = 0x0c, + .gtpr = 0x10, + .rtor = 0x14, + .rqr = 0x18, + .isr = 0x1c, + .icr = 0x20, + .rdr = 0x24, + .tdr = 0x28, + }, + .cfg = { + .uart_enable_bit = 0, + .has_7bits_data = true, + .has_wakeup = true, + .has_fifo = true, + .fifosize = 16, + } +}; + +/* USART_SR (F4) / USART_ISR (F7) */ +#define USART_SR_PE BIT(0) +#define USART_SR_FE BIT(1) +#define USART_SR_NF BIT(2) +#define USART_SR_ORE BIT(3) +#define USART_SR_IDLE BIT(4) +#define USART_SR_RXNE BIT(5) +#define USART_SR_TC BIT(6) +#define USART_SR_TXE BIT(7) +#define USART_SR_CTSIF BIT(9) +#define USART_SR_CTS BIT(10) /* F7 */ +#define USART_SR_RTOF BIT(11) /* F7 */ +#define USART_SR_EOBF BIT(12) /* F7 */ +#define USART_SR_ABRE BIT(14) /* F7 */ +#define USART_SR_ABRF BIT(15) /* F7 */ +#define USART_SR_BUSY BIT(16) /* F7 */ +#define USART_SR_CMF BIT(17) /* F7 */ +#define USART_SR_SBKF BIT(18) /* F7 */ +#define USART_SR_WUF BIT(20) /* H7 */ +#define USART_SR_TEACK BIT(21) /* F7 */ +#define USART_SR_ERR_MASK (USART_SR_ORE | USART_SR_FE | USART_SR_PE) +/* Dummy bits */ +#define USART_SR_DUMMY_RX BIT(16) + +/* USART_DR */ +#define USART_DR_MASK GENMASK(8, 0) + +/* USART_BRR */ +#define USART_BRR_DIV_F_MASK GENMASK(3, 0) +#define USART_BRR_DIV_M_MASK GENMASK(15, 4) +#define USART_BRR_DIV_M_SHIFT 4 +#define USART_BRR_04_R_SHIFT 1 + +/* USART_CR1 */ +#define USART_CR1_SBK BIT(0) +#define USART_CR1_RWU BIT(1) /* F4 */ +#define USART_CR1_UESM BIT(1) /* H7 */ +#define USART_CR1_RE BIT(2) +#define USART_CR1_TE BIT(3) +#define USART_CR1_IDLEIE BIT(4) +#define USART_CR1_RXNEIE BIT(5) +#define USART_CR1_TCIE BIT(6) +#define USART_CR1_TXEIE BIT(7) +#define USART_CR1_PEIE BIT(8) +#define USART_CR1_PS BIT(9) +#define USART_CR1_PCE BIT(10) +#define USART_CR1_WAKE BIT(11) +#define USART_CR1_M0 BIT(12) /* F7 (CR1_M for F4) */ +#define USART_CR1_MME BIT(13) /* F7 */ +#define USART_CR1_CMIE BIT(14) /* F7 */ +#define USART_CR1_OVER8 BIT(15) +#define USART_CR1_DEDT_MASK GENMASK(20, 16) /* F7 */ +#define USART_CR1_DEAT_MASK GENMASK(25, 21) /* F7 */ +#define USART_CR1_RTOIE BIT(26) /* F7 */ +#define USART_CR1_EOBIE BIT(27) /* F7 */ +#define USART_CR1_M1 BIT(28) /* F7 */ +#define USART_CR1_IE_MASK (GENMASK(8, 4) | BIT(14) | BIT(26) | BIT(27)) +#define USART_CR1_FIFOEN BIT(29) /* H7 */ +#define USART_CR1_DEAT_SHIFT 21 +#define USART_CR1_DEDT_SHIFT 16 + +/* USART_CR2 */ +#define USART_CR2_ADD_MASK GENMASK(3, 0) /* F4 */ +#define USART_CR2_ADDM7 BIT(4) /* F7 */ +#define USART_CR2_LBCL BIT(8) +#define USART_CR2_CPHA BIT(9) +#define USART_CR2_CPOL BIT(10) +#define USART_CR2_CLKEN BIT(11) +#define USART_CR2_STOP_2B BIT(13) +#define USART_CR2_STOP_MASK GENMASK(13, 12) +#define USART_CR2_LINEN BIT(14) +#define USART_CR2_SWAP BIT(15) /* F7 */ +#define USART_CR2_RXINV BIT(16) /* F7 */ +#define USART_CR2_TXINV BIT(17) /* F7 */ +#define USART_CR2_DATAINV BIT(18) /* F7 */ +#define USART_CR2_MSBFIRST BIT(19) /* F7 */ +#define USART_CR2_ABREN BIT(20) /* F7 */ +#define USART_CR2_ABRMOD_MASK GENMASK(22, 21) /* F7 */ +#define USART_CR2_RTOEN BIT(23) /* F7 */ +#define USART_CR2_ADD_F7_MASK GENMASK(31, 24) /* F7 */ + +/* USART_CR3 */ +#define USART_CR3_EIE BIT(0) +#define USART_CR3_IREN BIT(1) +#define USART_CR3_IRLP BIT(2) +#define USART_CR3_HDSEL BIT(3) +#define USART_CR3_NACK BIT(4) +#define USART_CR3_SCEN BIT(5) +#define USART_CR3_DMAR BIT(6) +#define USART_CR3_DMAT BIT(7) +#define USART_CR3_RTSE BIT(8) +#define USART_CR3_CTSE BIT(9) +#define USART_CR3_CTSIE BIT(10) +#define USART_CR3_ONEBIT BIT(11) +#define USART_CR3_OVRDIS BIT(12) /* F7 */ +#define USART_CR3_DDRE BIT(13) /* F7 */ +#define USART_CR3_DEM BIT(14) /* F7 */ +#define USART_CR3_DEP BIT(15) /* F7 */ +#define USART_CR3_SCARCNT_MASK GENMASK(19, 17) /* F7 */ +#define USART_CR3_WUS_MASK GENMASK(21, 20) /* H7 */ +#define USART_CR3_WUS_START_BIT BIT(21) /* H7 */ +#define USART_CR3_WUFIE BIT(22) /* H7 */ +#define USART_CR3_TXFTIE BIT(23) /* H7 */ +#define USART_CR3_TCBGTIE BIT(24) /* H7 */ +#define USART_CR3_RXFTCFG_MASK GENMASK(27, 25) /* H7 */ +#define USART_CR3_RXFTCFG_SHIFT 25 /* H7 */ +#define USART_CR3_RXFTIE BIT(28) /* H7 */ +#define USART_CR3_TXFTCFG_MASK GENMASK(31, 29) /* H7 */ +#define USART_CR3_TXFTCFG_SHIFT 29 /* H7 */ + +/* TX FIFO threashold set to half of its depth */ +#define USART_CR3_TXFTCFG_HALF 0x2 + +/* RX FIFO threashold set to half of its depth */ +#define USART_CR3_RXFTCFG_HALF 0x2 + +/* USART_GTPR */ +#define USART_GTPR_PSC_MASK GENMASK(7, 0) +#define USART_GTPR_GT_MASK GENMASK(15, 8) + +/* USART_RTOR */ +#define USART_RTOR_RTO_MASK GENMASK(23, 0) /* F7 */ +#define USART_RTOR_BLEN_MASK GENMASK(31, 24) /* F7 */ + +/* USART_RQR */ +#define USART_RQR_ABRRQ BIT(0) /* F7 */ +#define USART_RQR_SBKRQ BIT(1) /* F7 */ +#define USART_RQR_MMRQ BIT(2) /* F7 */ +#define USART_RQR_RXFRQ BIT(3) /* F7 */ +#define USART_RQR_TXFRQ BIT(4) /* F7 */ + +/* USART_ICR */ +#define USART_ICR_PECF BIT(0) /* F7 */ +#define USART_ICR_FECF BIT(1) /* F7 */ +#define USART_ICR_ORECF BIT(3) /* F7 */ +#define USART_ICR_IDLECF BIT(4) /* F7 */ +#define USART_ICR_TCCF BIT(6) /* F7 */ +#define USART_ICR_CTSCF BIT(9) /* F7 */ +#define USART_ICR_RTOCF BIT(11) /* F7 */ +#define USART_ICR_EOBCF BIT(12) /* F7 */ +#define USART_ICR_CMCF BIT(17) /* F7 */ +#define USART_ICR_WUCF BIT(20) /* H7 */ + +#define STM32_SERIAL_NAME "ttySTM" +#define STM32_MAX_PORTS 8 + +#define RX_BUF_L 200 /* dma rx buffer length */ +#define RX_BUF_P RX_BUF_L /* dma rx buffer period */ +#define TX_BUF_L 200 /* dma tx buffer length */ + +struct stm32_port { + struct uart_port port; + struct clk *clk; + const struct stm32_usart_info *info; + struct dma_chan *rx_ch; /* dma rx channel */ + dma_addr_t rx_dma_buf; /* dma rx buffer bus address */ + unsigned char *rx_buf; /* dma rx buffer cpu address */ + struct dma_chan *tx_ch; /* dma tx channel */ + dma_addr_t tx_dma_buf; /* dma tx buffer bus address */ + unsigned char *tx_buf; /* dma tx buffer cpu address */ + u32 cr1_irq; /* USART_CR1_RXNEIE or RTOIE */ + u32 cr3_irq; /* USART_CR3_RXFTIE */ + int last_res; + bool tx_dma_busy; /* dma tx busy */ + bool hw_flow_control; + bool fifoen; + int wakeirq; + int rdr_mask; /* receive data register mask */ + struct mctrl_gpios *gpios; /* modem control gpios */ +}; + +static struct stm32_port stm32_ports[STM32_MAX_PORTS]; +static struct uart_driver stm32_usart_driver; diff --git a/drivers/tty/serial/suncore.c b/drivers/tty/serial/suncore.c new file mode 100644 index 000000000..2491551c2 --- /dev/null +++ b/drivers/tty/serial/suncore.c @@ -0,0 +1,244 @@ +// SPDX-License-Identifier: GPL-2.0 +/* suncore.c + * + * Common SUN serial routines. Based entirely + * upon drivers/sbus/char/sunserial.c which is: + * + * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) + * + * Adaptation to new UART layer is: + * + * Copyright (C) 2002 David S. Miller (davem@redhat.com) + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + + +static int sunserial_current_minor = 64; + +int sunserial_register_minors(struct uart_driver *drv, int count) +{ + int err = 0; + + drv->minor = sunserial_current_minor; + drv->nr += count; + /* Register the driver on the first call */ + if (drv->nr == count) + err = uart_register_driver(drv); + if (err == 0) { + sunserial_current_minor += count; + drv->tty_driver->name_base = drv->minor - 64; + } + return err; +} +EXPORT_SYMBOL(sunserial_register_minors); + +void sunserial_unregister_minors(struct uart_driver *drv, int count) +{ + drv->nr -= count; + sunserial_current_minor -= count; + + if (drv->nr == 0) + uart_unregister_driver(drv); +} +EXPORT_SYMBOL(sunserial_unregister_minors); + +int sunserial_console_match(struct console *con, struct device_node *dp, + struct uart_driver *drv, int line, bool ignore_line) +{ + if (!con) + return 0; + + drv->cons = con; + + if (of_console_device != dp) + return 0; + + if (!ignore_line) { + int off = 0; + + if (of_console_options && + *of_console_options == 'b') + off = 1; + + if ((line & 1) != off) + return 0; + } + + if (!console_set_on_cmdline) { + con->index = line; + add_preferred_console(con->name, line, NULL); + } + return 1; +} +EXPORT_SYMBOL(sunserial_console_match); + +void sunserial_console_termios(struct console *con, struct device_node *uart_dp) +{ + const char *mode, *s; + char mode_prop[] = "ttyX-mode"; + int baud, bits, stop, cflag; + char parity; + + if (of_node_name_eq(uart_dp, "rsc") || + of_node_name_eq(uart_dp, "rsc-console") || + of_node_name_eq(uart_dp, "rsc-control")) { + mode = of_get_property(uart_dp, + "ssp-console-modes", NULL); + if (!mode) + mode = "115200,8,n,1,-"; + } else if (of_node_name_eq(uart_dp, "lom-console")) { + mode = "9600,8,n,1,-"; + } else { + struct device_node *dp; + char c; + + c = 'a'; + if (of_console_options) + c = *of_console_options; + + mode_prop[3] = c; + + dp = of_find_node_by_path("/options"); + mode = of_get_property(dp, mode_prop, NULL); + if (!mode) + mode = "9600,8,n,1,-"; + of_node_put(dp); + } + + cflag = CREAD | HUPCL | CLOCAL; + + s = mode; + baud = simple_strtoul(s, NULL, 0); + s = strchr(s, ','); + bits = simple_strtoul(++s, NULL, 0); + s = strchr(s, ','); + parity = *(++s); + s = strchr(s, ','); + stop = simple_strtoul(++s, NULL, 0); + s = strchr(s, ','); + /* XXX handshake is not handled here. */ + + switch (baud) { + case 150: cflag |= B150; break; + case 300: cflag |= B300; break; + case 600: cflag |= B600; break; + case 1200: cflag |= B1200; break; + case 2400: cflag |= B2400; break; + case 4800: cflag |= B4800; break; + case 9600: cflag |= B9600; break; + case 19200: cflag |= B19200; break; + case 38400: cflag |= B38400; break; + case 57600: cflag |= B57600; break; + case 115200: cflag |= B115200; break; + case 230400: cflag |= B230400; break; + case 460800: cflag |= B460800; break; + default: baud = 9600; cflag |= B9600; break; + } + + switch (bits) { + case 5: cflag |= CS5; break; + case 6: cflag |= CS6; break; + case 7: cflag |= CS7; break; + case 8: cflag |= CS8; break; + default: cflag |= CS8; break; + } + + switch (parity) { + case 'o': cflag |= (PARENB | PARODD); break; + case 'e': cflag |= PARENB; break; + case 'n': default: break; + } + + switch (stop) { + case 2: cflag |= CSTOPB; break; + case 1: default: break; + } + + con->cflag = cflag; +} + +/* Sun serial MOUSE auto baud rate detection. */ +static struct mouse_baud_cflag { + int baud; + unsigned int cflag; +} mouse_baud_table[] = { + { 1200, B1200 }, + { 2400, B2400 }, + { 4800, B4800 }, + { 9600, B9600 }, + { -1, ~0 }, + { -1, ~0 }, +}; + +unsigned int suncore_mouse_baud_cflag_next(unsigned int cflag, int *new_baud) +{ + int i; + + for (i = 0; mouse_baud_table[i].baud != -1; i++) + if (mouse_baud_table[i].cflag == (cflag & CBAUD)) + break; + + i += 1; + if (mouse_baud_table[i].baud == -1) + i = 0; + + *new_baud = mouse_baud_table[i].baud; + return mouse_baud_table[i].cflag; +} + +EXPORT_SYMBOL(suncore_mouse_baud_cflag_next); + +/* Basically, when the baud rate is wrong the mouse spits out + * breaks to us. + */ +int suncore_mouse_baud_detection(unsigned char ch, int is_break) +{ + static int mouse_got_break = 0; + static int ctr = 0; + + if (is_break) { + /* Let a few normal bytes go by before we jump the gun + * and say we need to try another baud rate. + */ + if (mouse_got_break && ctr < 8) + return 1; + + /* Ok, we need to try another baud. */ + ctr = 0; + mouse_got_break = 1; + return 2; + } + if (mouse_got_break) { + ctr++; + if (ch == 0x87) { + /* Correct baud rate determined. */ + mouse_got_break = 0; + } + return 1; + } + return 0; +} + +EXPORT_SYMBOL(suncore_mouse_baud_detection); + +static int __init suncore_init(void) +{ + return 0; +} +device_initcall(suncore_init); + +#if 0 /* ..def MODULE ; never supported as such */ +MODULE_AUTHOR("Eddie C. Dost, David S. Miller"); +MODULE_DESCRIPTION("Sun serial common layer"); +MODULE_LICENSE("GPL"); +#endif diff --git a/drivers/tty/serial/sunhv.c b/drivers/tty/serial/sunhv.c new file mode 100644 index 000000000..eafada8fb --- /dev/null +++ b/drivers/tty/serial/sunhv.c @@ -0,0 +1,652 @@ +// SPDX-License-Identifier: GPL-2.0 +/* sunhv.c: Serial driver for SUN4V hypervisor console. + * + * Copyright (C) 2006, 2007 David S. Miller (davem@davemloft.net) + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include + +#define CON_BREAK ((long)-1) +#define CON_HUP ((long)-2) + +#define IGNORE_BREAK 0x1 +#define IGNORE_ALL 0x2 + +static char *con_write_page; +static char *con_read_page; + +static int hung_up = 0; + +static void transmit_chars_putchar(struct uart_port *port, struct circ_buf *xmit) +{ + while (!uart_circ_empty(xmit)) { + long status = sun4v_con_putchar(xmit->buf[xmit->tail]); + + if (status != HV_EOK) + break; + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + } +} + +static void transmit_chars_write(struct uart_port *port, struct circ_buf *xmit) +{ + while (!uart_circ_empty(xmit)) { + unsigned long ra = __pa(xmit->buf + xmit->tail); + unsigned long len, status, sent; + + len = CIRC_CNT_TO_END(xmit->head, xmit->tail, + UART_XMIT_SIZE); + status = sun4v_con_write(ra, len, &sent); + if (status != HV_EOK) + break; + xmit->tail = (xmit->tail + sent) & (UART_XMIT_SIZE - 1); + port->icount.tx += sent; + } +} + +static int receive_chars_getchar(struct uart_port *port) +{ + int saw_console_brk = 0; + int limit = 10000; + + while (limit-- > 0) { + long status; + long c = sun4v_con_getchar(&status); + + if (status == HV_EWOULDBLOCK) + break; + + if (c == CON_BREAK) { + if (uart_handle_break(port)) + continue; + saw_console_brk = 1; + c = 0; + } + + if (c == CON_HUP) { + hung_up = 1; + uart_handle_dcd_change(port, 0); + } else if (hung_up) { + hung_up = 0; + uart_handle_dcd_change(port, 1); + } + + if (port->state == NULL) { + uart_handle_sysrq_char(port, c); + continue; + } + + port->icount.rx++; + + if (uart_handle_sysrq_char(port, c)) + continue; + + tty_insert_flip_char(&port->state->port, c, TTY_NORMAL); + } + + return saw_console_brk; +} + +static int receive_chars_read(struct uart_port *port) +{ + static int saw_console_brk; + int limit = 10000; + + while (limit-- > 0) { + unsigned long ra = __pa(con_read_page); + unsigned long bytes_read, i; + long stat = sun4v_con_read(ra, PAGE_SIZE, &bytes_read); + + if (stat != HV_EOK) { + bytes_read = 0; + + if (stat == CON_BREAK) { + if (saw_console_brk) + sun_do_break(); + + if (uart_handle_break(port)) + continue; + saw_console_brk = 1; + *con_read_page = 0; + bytes_read = 1; + } else if (stat == CON_HUP) { + hung_up = 1; + uart_handle_dcd_change(port, 0); + continue; + } else { + /* HV_EWOULDBLOCK, etc. */ + break; + } + } + + if (hung_up) { + hung_up = 0; + uart_handle_dcd_change(port, 1); + } + + if (port->sysrq != 0 && *con_read_page) { + for (i = 0; i < bytes_read; i++) + uart_handle_sysrq_char(port, con_read_page[i]); + saw_console_brk = 0; + } + + if (port->state == NULL) + continue; + + port->icount.rx += bytes_read; + + tty_insert_flip_string(&port->state->port, con_read_page, + bytes_read); + } + + return saw_console_brk; +} + +struct sunhv_ops { + void (*transmit_chars)(struct uart_port *port, struct circ_buf *xmit); + int (*receive_chars)(struct uart_port *port); +}; + +static const struct sunhv_ops bychar_ops = { + .transmit_chars = transmit_chars_putchar, + .receive_chars = receive_chars_getchar, +}; + +static const struct sunhv_ops bywrite_ops = { + .transmit_chars = transmit_chars_write, + .receive_chars = receive_chars_read, +}; + +static const struct sunhv_ops *sunhv_ops = &bychar_ops; + +static struct tty_port *receive_chars(struct uart_port *port) +{ + struct tty_port *tport = NULL; + + if (port->state != NULL) /* Unopened serial console */ + tport = &port->state->port; + + if (sunhv_ops->receive_chars(port)) + sun_do_break(); + + return tport; +} + +static void transmit_chars(struct uart_port *port) +{ + struct circ_buf *xmit; + + if (!port->state) + return; + + xmit = &port->state->xmit; + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) + return; + + sunhv_ops->transmit_chars(port, xmit); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); +} + +static irqreturn_t sunhv_interrupt(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + struct tty_port *tport; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + tport = receive_chars(port); + transmit_chars(port); + spin_unlock_irqrestore(&port->lock, flags); + + if (tport) + tty_flip_buffer_push(tport); + + return IRQ_HANDLED; +} + +/* port->lock is not held. */ +static unsigned int sunhv_tx_empty(struct uart_port *port) +{ + /* Transmitter is always empty for us. If the circ buffer + * is non-empty or there is an x_char pending, our caller + * will do the right thing and ignore what we return here. + */ + return TIOCSER_TEMT; +} + +/* port->lock held by caller. */ +static void sunhv_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + return; +} + +/* port->lock is held by caller and interrupts are disabled. */ +static unsigned int sunhv_get_mctrl(struct uart_port *port) +{ + return TIOCM_DSR | TIOCM_CAR | TIOCM_CTS; +} + +/* port->lock held by caller. */ +static void sunhv_stop_tx(struct uart_port *port) +{ + return; +} + +/* port->lock held by caller. */ +static void sunhv_start_tx(struct uart_port *port) +{ + transmit_chars(port); +} + +/* port->lock is not held. */ +static void sunhv_send_xchar(struct uart_port *port, char ch) +{ + unsigned long flags; + int limit = 10000; + + if (ch == __DISABLED_CHAR) + return; + + spin_lock_irqsave(&port->lock, flags); + + while (limit-- > 0) { + long status = sun4v_con_putchar(ch); + if (status == HV_EOK) + break; + udelay(1); + } + + spin_unlock_irqrestore(&port->lock, flags); +} + +/* port->lock held by caller. */ +static void sunhv_stop_rx(struct uart_port *port) +{ +} + +/* port->lock is not held. */ +static void sunhv_break_ctl(struct uart_port *port, int break_state) +{ + if (break_state) { + unsigned long flags; + int limit = 10000; + + spin_lock_irqsave(&port->lock, flags); + + while (limit-- > 0) { + long status = sun4v_con_putchar(CON_BREAK); + if (status == HV_EOK) + break; + udelay(1); + } + + spin_unlock_irqrestore(&port->lock, flags); + } +} + +/* port->lock is not held. */ +static int sunhv_startup(struct uart_port *port) +{ + return 0; +} + +/* port->lock is not held. */ +static void sunhv_shutdown(struct uart_port *port) +{ +} + +/* port->lock is not held. */ +static void sunhv_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000); + unsigned int quot = uart_get_divisor(port, baud); + unsigned int iflag, cflag; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + iflag = termios->c_iflag; + cflag = termios->c_cflag; + + port->ignore_status_mask = 0; + if (iflag & IGNBRK) + port->ignore_status_mask |= IGNORE_BREAK; + if ((cflag & CREAD) == 0) + port->ignore_status_mask |= IGNORE_ALL; + + /* XXX */ + uart_update_timeout(port, cflag, + (port->uartclk / (16 * quot))); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *sunhv_type(struct uart_port *port) +{ + return "SUN4V HCONS"; +} + +static void sunhv_release_port(struct uart_port *port) +{ +} + +static int sunhv_request_port(struct uart_port *port) +{ + return 0; +} + +static void sunhv_config_port(struct uart_port *port, int flags) +{ +} + +static int sunhv_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + return -EINVAL; +} + +static const struct uart_ops sunhv_pops = { + .tx_empty = sunhv_tx_empty, + .set_mctrl = sunhv_set_mctrl, + .get_mctrl = sunhv_get_mctrl, + .stop_tx = sunhv_stop_tx, + .start_tx = sunhv_start_tx, + .send_xchar = sunhv_send_xchar, + .stop_rx = sunhv_stop_rx, + .break_ctl = sunhv_break_ctl, + .startup = sunhv_startup, + .shutdown = sunhv_shutdown, + .set_termios = sunhv_set_termios, + .type = sunhv_type, + .release_port = sunhv_release_port, + .request_port = sunhv_request_port, + .config_port = sunhv_config_port, + .verify_port = sunhv_verify_port, +}; + +static struct uart_driver sunhv_reg = { + .owner = THIS_MODULE, + .driver_name = "sunhv", + .dev_name = "ttyHV", + .major = TTY_MAJOR, +}; + +static struct uart_port *sunhv_port; + +void sunhv_migrate_hvcons_irq(int cpu) +{ + /* Migrate hvcons irq to param cpu */ + irq_force_affinity(sunhv_port->irq, cpumask_of(cpu)); +} + +/* Copy 's' into the con_write_page, decoding "\n" into + * "\r\n" along the way. We have to return two lengths + * because the caller needs to know how much to advance + * 's' and also how many bytes to output via con_write_page. + */ +static int fill_con_write_page(const char *s, unsigned int n, + unsigned long *page_bytes) +{ + const char *orig_s = s; + char *p = con_write_page; + int left = PAGE_SIZE; + + while (n--) { + if (*s == '\n') { + if (left < 2) + break; + *p++ = '\r'; + left--; + } else if (left < 1) + break; + *p++ = *s++; + left--; + } + *page_bytes = p - con_write_page; + return s - orig_s; +} + +static void sunhv_console_write_paged(struct console *con, const char *s, unsigned n) +{ + struct uart_port *port = sunhv_port; + unsigned long flags; + int locked = 1; + + if (port->sysrq || oops_in_progress) + locked = spin_trylock_irqsave(&port->lock, flags); + else + spin_lock_irqsave(&port->lock, flags); + + while (n > 0) { + unsigned long ra = __pa(con_write_page); + unsigned long page_bytes; + unsigned int cpy = fill_con_write_page(s, n, + &page_bytes); + + n -= cpy; + s += cpy; + while (page_bytes > 0) { + unsigned long written; + int limit = 1000000; + + while (limit--) { + unsigned long stat; + + stat = sun4v_con_write(ra, page_bytes, + &written); + if (stat == HV_EOK) + break; + udelay(1); + } + if (limit < 0) + break; + page_bytes -= written; + ra += written; + } + } + + if (locked) + spin_unlock_irqrestore(&port->lock, flags); +} + +static inline void sunhv_console_putchar(struct uart_port *port, char c) +{ + int limit = 1000000; + + while (limit-- > 0) { + long status = sun4v_con_putchar(c); + if (status == HV_EOK) + break; + udelay(1); + } +} + +static void sunhv_console_write_bychar(struct console *con, const char *s, unsigned n) +{ + struct uart_port *port = sunhv_port; + unsigned long flags; + int i, locked = 1; + + if (port->sysrq || oops_in_progress) + locked = spin_trylock_irqsave(&port->lock, flags); + else + spin_lock_irqsave(&port->lock, flags); + + for (i = 0; i < n; i++) { + if (*s == '\n') + sunhv_console_putchar(port, '\r'); + sunhv_console_putchar(port, *s++); + } + + if (locked) + spin_unlock_irqrestore(&port->lock, flags); +} + +static struct console sunhv_console = { + .name = "ttyHV", + .write = sunhv_console_write_bychar, + .device = uart_console_device, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &sunhv_reg, +}; + +static int hv_probe(struct platform_device *op) +{ + struct uart_port *port; + unsigned long minor; + int err; + + if (op->archdata.irqs[0] == 0xffffffff) + return -ENODEV; + + port = kzalloc(sizeof(struct uart_port), GFP_KERNEL); + if (unlikely(!port)) + return -ENOMEM; + + minor = 1; + if (sun4v_hvapi_register(HV_GRP_CORE, 1, &minor) == 0 && + minor >= 1) { + err = -ENOMEM; + con_write_page = kzalloc(PAGE_SIZE, GFP_KERNEL); + if (!con_write_page) + goto out_free_port; + + con_read_page = kzalloc(PAGE_SIZE, GFP_KERNEL); + if (!con_read_page) + goto out_free_con_write_page; + + sunhv_console.write = sunhv_console_write_paged; + sunhv_ops = &bywrite_ops; + } + + sunhv_port = port; + + port->has_sysrq = 1; + port->line = 0; + port->ops = &sunhv_pops; + port->type = PORT_SUNHV; + port->uartclk = ( 29491200 / 16 ); /* arbitrary */ + + port->membase = (unsigned char __iomem *) __pa(port); + + port->irq = op->archdata.irqs[0]; + + port->dev = &op->dev; + + err = sunserial_register_minors(&sunhv_reg, 1); + if (err) + goto out_free_con_read_page; + + sunserial_console_match(&sunhv_console, op->dev.of_node, + &sunhv_reg, port->line, false); + + err = uart_add_one_port(&sunhv_reg, port); + if (err) + goto out_unregister_driver; + + err = request_irq(port->irq, sunhv_interrupt, 0, "hvcons", port); + if (err) + goto out_remove_port; + + platform_set_drvdata(op, port); + + return 0; + +out_remove_port: + uart_remove_one_port(&sunhv_reg, port); + +out_unregister_driver: + sunserial_unregister_minors(&sunhv_reg, 1); + +out_free_con_read_page: + kfree(con_read_page); + +out_free_con_write_page: + kfree(con_write_page); + +out_free_port: + kfree(port); + sunhv_port = NULL; + return err; +} + +static int hv_remove(struct platform_device *dev) +{ + struct uart_port *port = platform_get_drvdata(dev); + + free_irq(port->irq, port); + + uart_remove_one_port(&sunhv_reg, port); + + sunserial_unregister_minors(&sunhv_reg, 1); + kfree(con_read_page); + kfree(con_write_page); + kfree(port); + sunhv_port = NULL; + + return 0; +} + +static const struct of_device_id hv_match[] = { + { + .name = "console", + .compatible = "qcn", + }, + { + .name = "console", + .compatible = "SUNW,sun4v-console", + }, + {}, +}; + +static struct platform_driver hv_driver = { + .driver = { + .name = "hv", + .of_match_table = hv_match, + }, + .probe = hv_probe, + .remove = hv_remove, +}; + +static int __init sunhv_init(void) +{ + if (tlb_type != hypervisor) + return -ENODEV; + + return platform_driver_register(&hv_driver); +} +device_initcall(sunhv_init); + +#if 0 /* ...def MODULE ; never supported as such */ +MODULE_AUTHOR("David S. Miller"); +MODULE_DESCRIPTION("SUN4V Hypervisor console driver"); +MODULE_VERSION("2.0"); +MODULE_LICENSE("GPL"); +#endif diff --git a/drivers/tty/serial/sunsab.c b/drivers/tty/serial/sunsab.c new file mode 100644 index 000000000..451c72336 --- /dev/null +++ b/drivers/tty/serial/sunsab.c @@ -0,0 +1,1165 @@ +// SPDX-License-Identifier: GPL-2.0 +/* sunsab.c: ASYNC Driver for the SIEMENS SAB82532 DUSCC. + * + * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) + * Copyright (C) 2002, 2006 David S. Miller (davem@davemloft.net) + * + * Rewrote buffer handling to use CIRC(Circular Buffer) macros. + * Maxim Krasnyanskiy + * + * Fixed to use tty_get_baud_rate, and to allow for arbitrary baud + * rates to be programmed into the UART. Also eliminated a lot of + * duplicated code in the console setup. + * Theodore Ts'o , 2001-Oct-12 + * + * Ported to new 2.5.x UART layer. + * David S. Miller + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include + +#include "sunsab.h" + +struct uart_sunsab_port { + struct uart_port port; /* Generic UART port */ + union sab82532_async_regs __iomem *regs; /* Chip registers */ + unsigned long irqflags; /* IRQ state flags */ + int dsr; /* Current DSR state */ + unsigned int cec_timeout; /* Chip poll timeout... */ + unsigned int tec_timeout; /* likewise */ + unsigned char interrupt_mask0;/* ISR0 masking */ + unsigned char interrupt_mask1;/* ISR1 masking */ + unsigned char pvr_dtr_bit; /* Which PVR bit is DTR */ + unsigned char pvr_dsr_bit; /* Which PVR bit is DSR */ + unsigned int gis_shift; + int type; /* SAB82532 version */ + + /* Setting configuration bits while the transmitter is active + * can cause garbage characters to get emitted by the chip. + * Therefore, we cache such writes here and do the real register + * write the next time the transmitter becomes idle. + */ + unsigned int cached_ebrg; + unsigned char cached_mode; + unsigned char cached_pvr; + unsigned char cached_dafo; +}; + +/* + * This assumes you have a 29.4912 MHz clock for your UART. + */ +#define SAB_BASE_BAUD ( 29491200 / 16 ) + +static char *sab82532_version[16] = { + "V1.0", "V2.0", "V3.2", "V(0x03)", + "V(0x04)", "V(0x05)", "V(0x06)", "V(0x07)", + "V(0x08)", "V(0x09)", "V(0x0a)", "V(0x0b)", + "V(0x0c)", "V(0x0d)", "V(0x0e)", "V(0x0f)" +}; + +#define SAB82532_MAX_TEC_TIMEOUT 200000 /* 1 character time (at 50 baud) */ +#define SAB82532_MAX_CEC_TIMEOUT 50000 /* 2.5 TX CLKs (at 50 baud) */ + +#define SAB82532_RECV_FIFO_SIZE 32 /* Standard async fifo sizes */ +#define SAB82532_XMIT_FIFO_SIZE 32 + +static __inline__ void sunsab_tec_wait(struct uart_sunsab_port *up) +{ + int timeout = up->tec_timeout; + + while ((readb(&up->regs->r.star) & SAB82532_STAR_TEC) && --timeout) + udelay(1); +} + +static __inline__ void sunsab_cec_wait(struct uart_sunsab_port *up) +{ + int timeout = up->cec_timeout; + + while ((readb(&up->regs->r.star) & SAB82532_STAR_CEC) && --timeout) + udelay(1); +} + +static struct tty_port * +receive_chars(struct uart_sunsab_port *up, + union sab82532_irq_status *stat) +{ + struct tty_port *port = NULL; + unsigned char buf[32]; + int saw_console_brk = 0; + int free_fifo = 0; + int count = 0; + int i; + + if (up->port.state != NULL) /* Unopened serial console */ + port = &up->port.state->port; + + /* Read number of BYTES (Character + Status) available. */ + if (stat->sreg.isr0 & SAB82532_ISR0_RPF) { + count = SAB82532_RECV_FIFO_SIZE; + free_fifo++; + } + + if (stat->sreg.isr0 & SAB82532_ISR0_TCD) { + count = readb(&up->regs->r.rbcl) & (SAB82532_RECV_FIFO_SIZE - 1); + free_fifo++; + } + + /* Issue a FIFO read command in case we where idle. */ + if (stat->sreg.isr0 & SAB82532_ISR0_TIME) { + sunsab_cec_wait(up); + writeb(SAB82532_CMDR_RFRD, &up->regs->w.cmdr); + return port; + } + + if (stat->sreg.isr0 & SAB82532_ISR0_RFO) + free_fifo++; + + /* Read the FIFO. */ + for (i = 0; i < count; i++) + buf[i] = readb(&up->regs->r.rfifo[i]); + + /* Issue Receive Message Complete command. */ + if (free_fifo) { + sunsab_cec_wait(up); + writeb(SAB82532_CMDR_RMC, &up->regs->w.cmdr); + } + + /* Count may be zero for BRK, so we check for it here */ + if ((stat->sreg.isr1 & SAB82532_ISR1_BRK) && + (up->port.line == up->port.cons->index)) + saw_console_brk = 1; + + if (count == 0) { + if (unlikely(stat->sreg.isr1 & SAB82532_ISR1_BRK)) { + stat->sreg.isr0 &= ~(SAB82532_ISR0_PERR | + SAB82532_ISR0_FERR); + up->port.icount.brk++; + uart_handle_break(&up->port); + } + } + + for (i = 0; i < count; i++) { + unsigned char ch = buf[i], flag; + + flag = TTY_NORMAL; + up->port.icount.rx++; + + if (unlikely(stat->sreg.isr0 & (SAB82532_ISR0_PERR | + SAB82532_ISR0_FERR | + SAB82532_ISR0_RFO)) || + unlikely(stat->sreg.isr1 & SAB82532_ISR1_BRK)) { + /* + * For statistics only + */ + if (stat->sreg.isr1 & SAB82532_ISR1_BRK) { + stat->sreg.isr0 &= ~(SAB82532_ISR0_PERR | + SAB82532_ISR0_FERR); + up->port.icount.brk++; + /* + * We do the SysRQ and SAK checking + * here because otherwise the break + * may get masked by ignore_status_mask + * or read_status_mask. + */ + if (uart_handle_break(&up->port)) + continue; + } else if (stat->sreg.isr0 & SAB82532_ISR0_PERR) + up->port.icount.parity++; + else if (stat->sreg.isr0 & SAB82532_ISR0_FERR) + up->port.icount.frame++; + if (stat->sreg.isr0 & SAB82532_ISR0_RFO) + up->port.icount.overrun++; + + /* + * Mask off conditions which should be ingored. + */ + stat->sreg.isr0 &= (up->port.read_status_mask & 0xff); + stat->sreg.isr1 &= ((up->port.read_status_mask >> 8) & 0xff); + + if (stat->sreg.isr1 & SAB82532_ISR1_BRK) { + flag = TTY_BREAK; + } else if (stat->sreg.isr0 & SAB82532_ISR0_PERR) + flag = TTY_PARITY; + else if (stat->sreg.isr0 & SAB82532_ISR0_FERR) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(&up->port, ch) || !port) + continue; + + if ((stat->sreg.isr0 & (up->port.ignore_status_mask & 0xff)) == 0 && + (stat->sreg.isr1 & ((up->port.ignore_status_mask >> 8) & 0xff)) == 0) + tty_insert_flip_char(port, ch, flag); + if (stat->sreg.isr0 & SAB82532_ISR0_RFO) + tty_insert_flip_char(port, 0, TTY_OVERRUN); + } + + if (saw_console_brk) + sun_do_break(); + + return port; +} + +static void sunsab_stop_tx(struct uart_port *); +static void sunsab_tx_idle(struct uart_sunsab_port *); + +static void transmit_chars(struct uart_sunsab_port *up, + union sab82532_irq_status *stat) +{ + struct circ_buf *xmit = &up->port.state->xmit; + int i; + + if (stat->sreg.isr1 & SAB82532_ISR1_ALLS) { + up->interrupt_mask1 |= SAB82532_IMR1_ALLS; + writeb(up->interrupt_mask1, &up->regs->w.imr1); + set_bit(SAB82532_ALLS, &up->irqflags); + } + +#if 0 /* bde@nwlink.com says this check causes problems */ + if (!(stat->sreg.isr1 & SAB82532_ISR1_XPR)) + return; +#endif + + if (!(readb(&up->regs->r.star) & SAB82532_STAR_XFW)) + return; + + set_bit(SAB82532_XPR, &up->irqflags); + sunsab_tx_idle(up); + + if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { + up->interrupt_mask1 |= SAB82532_IMR1_XPR; + writeb(up->interrupt_mask1, &up->regs->w.imr1); + return; + } + + up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR); + writeb(up->interrupt_mask1, &up->regs->w.imr1); + clear_bit(SAB82532_ALLS, &up->irqflags); + + /* Stuff 32 bytes into Transmit FIFO. */ + clear_bit(SAB82532_XPR, &up->irqflags); + for (i = 0; i < up->port.fifosize; i++) { + writeb(xmit->buf[xmit->tail], + &up->regs->w.xfifo[i]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } + + /* Issue a Transmit Frame command. */ + sunsab_cec_wait(up); + writeb(SAB82532_CMDR_XF, &up->regs->w.cmdr); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + if (uart_circ_empty(xmit)) + sunsab_stop_tx(&up->port); +} + +static void check_status(struct uart_sunsab_port *up, + union sab82532_irq_status *stat) +{ + if (stat->sreg.isr0 & SAB82532_ISR0_CDSC) + uart_handle_dcd_change(&up->port, + !(readb(&up->regs->r.vstr) & SAB82532_VSTR_CD)); + + if (stat->sreg.isr1 & SAB82532_ISR1_CSC) + uart_handle_cts_change(&up->port, + (readb(&up->regs->r.star) & SAB82532_STAR_CTS)); + + if ((readb(&up->regs->r.pvr) & up->pvr_dsr_bit) ^ up->dsr) { + up->dsr = (readb(&up->regs->r.pvr) & up->pvr_dsr_bit) ? 0 : 1; + up->port.icount.dsr++; + } + + wake_up_interruptible(&up->port.state->port.delta_msr_wait); +} + +static irqreturn_t sunsab_interrupt(int irq, void *dev_id) +{ + struct uart_sunsab_port *up = dev_id; + struct tty_port *port = NULL; + union sab82532_irq_status status; + unsigned long flags; + unsigned char gis; + + spin_lock_irqsave(&up->port.lock, flags); + + status.stat = 0; + gis = readb(&up->regs->r.gis) >> up->gis_shift; + if (gis & 1) + status.sreg.isr0 = readb(&up->regs->r.isr0); + if (gis & 2) + status.sreg.isr1 = readb(&up->regs->r.isr1); + + if (status.stat) { + if ((status.sreg.isr0 & (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME | + SAB82532_ISR0_RFO | SAB82532_ISR0_RPF)) || + (status.sreg.isr1 & SAB82532_ISR1_BRK)) + port = receive_chars(up, &status); + if ((status.sreg.isr0 & SAB82532_ISR0_CDSC) || + (status.sreg.isr1 & SAB82532_ISR1_CSC)) + check_status(up, &status); + if (status.sreg.isr1 & (SAB82532_ISR1_ALLS | SAB82532_ISR1_XPR)) + transmit_chars(up, &status); + } + + spin_unlock_irqrestore(&up->port.lock, flags); + + if (port) + tty_flip_buffer_push(port); + + return IRQ_HANDLED; +} + +/* port->lock is not held. */ +static unsigned int sunsab_tx_empty(struct uart_port *port) +{ + struct uart_sunsab_port *up = + container_of(port, struct uart_sunsab_port, port); + int ret; + + /* Do not need a lock for a state test like this. */ + if (test_bit(SAB82532_ALLS, &up->irqflags)) + ret = TIOCSER_TEMT; + else + ret = 0; + + return ret; +} + +/* port->lock held by caller. */ +static void sunsab_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_sunsab_port *up = + container_of(port, struct uart_sunsab_port, port); + + if (mctrl & TIOCM_RTS) { + up->cached_mode &= ~SAB82532_MODE_FRTS; + up->cached_mode |= SAB82532_MODE_RTS; + } else { + up->cached_mode |= (SAB82532_MODE_FRTS | + SAB82532_MODE_RTS); + } + if (mctrl & TIOCM_DTR) { + up->cached_pvr &= ~(up->pvr_dtr_bit); + } else { + up->cached_pvr |= up->pvr_dtr_bit; + } + + set_bit(SAB82532_REGS_PENDING, &up->irqflags); + if (test_bit(SAB82532_XPR, &up->irqflags)) + sunsab_tx_idle(up); +} + +/* port->lock is held by caller and interrupts are disabled. */ +static unsigned int sunsab_get_mctrl(struct uart_port *port) +{ + struct uart_sunsab_port *up = + container_of(port, struct uart_sunsab_port, port); + unsigned char val; + unsigned int result; + + result = 0; + + val = readb(&up->regs->r.pvr); + result |= (val & up->pvr_dsr_bit) ? 0 : TIOCM_DSR; + + val = readb(&up->regs->r.vstr); + result |= (val & SAB82532_VSTR_CD) ? 0 : TIOCM_CAR; + + val = readb(&up->regs->r.star); + result |= (val & SAB82532_STAR_CTS) ? TIOCM_CTS : 0; + + return result; +} + +/* port->lock held by caller. */ +static void sunsab_stop_tx(struct uart_port *port) +{ + struct uart_sunsab_port *up = + container_of(port, struct uart_sunsab_port, port); + + up->interrupt_mask1 |= SAB82532_IMR1_XPR; + writeb(up->interrupt_mask1, &up->regs->w.imr1); +} + +/* port->lock held by caller. */ +static void sunsab_tx_idle(struct uart_sunsab_port *up) +{ + if (test_bit(SAB82532_REGS_PENDING, &up->irqflags)) { + u8 tmp; + + clear_bit(SAB82532_REGS_PENDING, &up->irqflags); + writeb(up->cached_mode, &up->regs->rw.mode); + writeb(up->cached_pvr, &up->regs->rw.pvr); + writeb(up->cached_dafo, &up->regs->w.dafo); + + writeb(up->cached_ebrg & 0xff, &up->regs->w.bgr); + tmp = readb(&up->regs->rw.ccr2); + tmp &= ~0xc0; + tmp |= (up->cached_ebrg >> 2) & 0xc0; + writeb(tmp, &up->regs->rw.ccr2); + } +} + +/* port->lock held by caller. */ +static void sunsab_start_tx(struct uart_port *port) +{ + struct uart_sunsab_port *up = + container_of(port, struct uart_sunsab_port, port); + struct circ_buf *xmit = &up->port.state->xmit; + int i; + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) + return; + + up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR); + writeb(up->interrupt_mask1, &up->regs->w.imr1); + + if (!test_bit(SAB82532_XPR, &up->irqflags)) + return; + + clear_bit(SAB82532_ALLS, &up->irqflags); + clear_bit(SAB82532_XPR, &up->irqflags); + + for (i = 0; i < up->port.fifosize; i++) { + writeb(xmit->buf[xmit->tail], + &up->regs->w.xfifo[i]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } + + /* Issue a Transmit Frame command. */ + sunsab_cec_wait(up); + writeb(SAB82532_CMDR_XF, &up->regs->w.cmdr); +} + +/* port->lock is not held. */ +static void sunsab_send_xchar(struct uart_port *port, char ch) +{ + struct uart_sunsab_port *up = + container_of(port, struct uart_sunsab_port, port); + unsigned long flags; + + if (ch == __DISABLED_CHAR) + return; + + spin_lock_irqsave(&up->port.lock, flags); + + sunsab_tec_wait(up); + writeb(ch, &up->regs->w.tic); + + spin_unlock_irqrestore(&up->port.lock, flags); +} + +/* port->lock held by caller. */ +static void sunsab_stop_rx(struct uart_port *port) +{ + struct uart_sunsab_port *up = + container_of(port, struct uart_sunsab_port, port); + + up->interrupt_mask0 |= SAB82532_IMR0_TCD; + writeb(up->interrupt_mask1, &up->regs->w.imr0); +} + +/* port->lock is not held. */ +static void sunsab_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_sunsab_port *up = + container_of(port, struct uart_sunsab_port, port); + unsigned long flags; + unsigned char val; + + spin_lock_irqsave(&up->port.lock, flags); + + val = up->cached_dafo; + if (break_state) + val |= SAB82532_DAFO_XBRK; + else + val &= ~SAB82532_DAFO_XBRK; + up->cached_dafo = val; + + set_bit(SAB82532_REGS_PENDING, &up->irqflags); + if (test_bit(SAB82532_XPR, &up->irqflags)) + sunsab_tx_idle(up); + + spin_unlock_irqrestore(&up->port.lock, flags); +} + +/* port->lock is not held. */ +static int sunsab_startup(struct uart_port *port) +{ + struct uart_sunsab_port *up = + container_of(port, struct uart_sunsab_port, port); + unsigned long flags; + unsigned char tmp; + int err = request_irq(up->port.irq, sunsab_interrupt, + IRQF_SHARED, "sab", up); + if (err) + return err; + + spin_lock_irqsave(&up->port.lock, flags); + + /* + * Wait for any commands or immediate characters + */ + sunsab_cec_wait(up); + sunsab_tec_wait(up); + + /* + * Clear the FIFO buffers. + */ + writeb(SAB82532_CMDR_RRES, &up->regs->w.cmdr); + sunsab_cec_wait(up); + writeb(SAB82532_CMDR_XRES, &up->regs->w.cmdr); + + /* + * Clear the interrupt registers. + */ + (void) readb(&up->regs->r.isr0); + (void) readb(&up->regs->r.isr1); + + /* + * Now, initialize the UART + */ + writeb(0, &up->regs->w.ccr0); /* power-down */ + writeb(SAB82532_CCR0_MCE | SAB82532_CCR0_SC_NRZ | + SAB82532_CCR0_SM_ASYNC, &up->regs->w.ccr0); + writeb(SAB82532_CCR1_ODS | SAB82532_CCR1_BCR | 7, &up->regs->w.ccr1); + writeb(SAB82532_CCR2_BDF | SAB82532_CCR2_SSEL | + SAB82532_CCR2_TOE, &up->regs->w.ccr2); + writeb(0, &up->regs->w.ccr3); + writeb(SAB82532_CCR4_MCK4 | SAB82532_CCR4_EBRG, &up->regs->w.ccr4); + up->cached_mode = (SAB82532_MODE_RTS | SAB82532_MODE_FCTS | + SAB82532_MODE_RAC); + writeb(up->cached_mode, &up->regs->w.mode); + writeb(SAB82532_RFC_DPS|SAB82532_RFC_RFTH_32, &up->regs->w.rfc); + + tmp = readb(&up->regs->rw.ccr0); + tmp |= SAB82532_CCR0_PU; /* power-up */ + writeb(tmp, &up->regs->rw.ccr0); + + /* + * Finally, enable interrupts + */ + up->interrupt_mask0 = (SAB82532_IMR0_PERR | SAB82532_IMR0_FERR | + SAB82532_IMR0_PLLA); + writeb(up->interrupt_mask0, &up->regs->w.imr0); + up->interrupt_mask1 = (SAB82532_IMR1_BRKT | SAB82532_IMR1_ALLS | + SAB82532_IMR1_XOFF | SAB82532_IMR1_TIN | + SAB82532_IMR1_CSC | SAB82532_IMR1_XON | + SAB82532_IMR1_XPR); + writeb(up->interrupt_mask1, &up->regs->w.imr1); + set_bit(SAB82532_ALLS, &up->irqflags); + set_bit(SAB82532_XPR, &up->irqflags); + + spin_unlock_irqrestore(&up->port.lock, flags); + + return 0; +} + +/* port->lock is not held. */ +static void sunsab_shutdown(struct uart_port *port) +{ + struct uart_sunsab_port *up = + container_of(port, struct uart_sunsab_port, port); + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + + /* Disable Interrupts */ + up->interrupt_mask0 = 0xff; + writeb(up->interrupt_mask0, &up->regs->w.imr0); + up->interrupt_mask1 = 0xff; + writeb(up->interrupt_mask1, &up->regs->w.imr1); + + /* Disable break condition */ + up->cached_dafo = readb(&up->regs->rw.dafo); + up->cached_dafo &= ~SAB82532_DAFO_XBRK; + writeb(up->cached_dafo, &up->regs->rw.dafo); + + /* Disable Receiver */ + up->cached_mode &= ~SAB82532_MODE_RAC; + writeb(up->cached_mode, &up->regs->rw.mode); + + /* + * XXX FIXME + * + * If the chip is powered down here the system hangs/crashes during + * reboot or shutdown. This needs to be investigated further, + * similar behaviour occurs in 2.4 when the driver is configured + * as a module only. One hint may be that data is sometimes + * transmitted at 9600 baud during shutdown (regardless of the + * speed the chip was configured for when the port was open). + */ +#if 0 + /* Power Down */ + tmp = readb(&up->regs->rw.ccr0); + tmp &= ~SAB82532_CCR0_PU; + writeb(tmp, &up->regs->rw.ccr0); +#endif + + spin_unlock_irqrestore(&up->port.lock, flags); + free_irq(up->port.irq, up); +} + +/* + * This is used to figure out the divisor speeds. + * + * The formula is: Baud = SAB_BASE_BAUD / ((N + 1) * (1 << M)), + * + * with 0 <= N < 64 and 0 <= M < 16 + */ + +static void calc_ebrg(int baud, int *n_ret, int *m_ret) +{ + int n, m; + + if (baud == 0) { + *n_ret = 0; + *m_ret = 0; + return; + } + + /* + * We scale numbers by 10 so that we get better accuracy + * without having to use floating point. Here we increment m + * until n is within the valid range. + */ + n = (SAB_BASE_BAUD * 10) / baud; + m = 0; + while (n >= 640) { + n = n / 2; + m++; + } + n = (n+5) / 10; + /* + * We try very hard to avoid speeds with M == 0 since they may + * not work correctly for XTAL frequences above 10 MHz. + */ + if ((m == 0) && ((n & 1) == 0)) { + n = n / 2; + m++; + } + *n_ret = n - 1; + *m_ret = m; +} + +/* Internal routine, port->lock is held and local interrupts are disabled. */ +static void sunsab_convert_to_sab(struct uart_sunsab_port *up, unsigned int cflag, + unsigned int iflag, unsigned int baud, + unsigned int quot) +{ + unsigned char dafo; + int bits, n, m; + + /* Byte size and parity */ + switch (cflag & CSIZE) { + case CS5: dafo = SAB82532_DAFO_CHL5; bits = 7; break; + case CS6: dafo = SAB82532_DAFO_CHL6; bits = 8; break; + case CS7: dafo = SAB82532_DAFO_CHL7; bits = 9; break; + case CS8: dafo = SAB82532_DAFO_CHL8; bits = 10; break; + /* Never happens, but GCC is too dumb to figure it out */ + default: dafo = SAB82532_DAFO_CHL5; bits = 7; break; + } + + if (cflag & CSTOPB) { + dafo |= SAB82532_DAFO_STOP; + bits++; + } + + if (cflag & PARENB) { + dafo |= SAB82532_DAFO_PARE; + bits++; + } + + if (cflag & PARODD) { + dafo |= SAB82532_DAFO_PAR_ODD; + } else { + dafo |= SAB82532_DAFO_PAR_EVEN; + } + up->cached_dafo = dafo; + + calc_ebrg(baud, &n, &m); + + up->cached_ebrg = n | (m << 6); + + up->tec_timeout = (10 * 1000000) / baud; + up->cec_timeout = up->tec_timeout >> 2; + + /* CTS flow control flags */ + /* We encode read_status_mask and ignore_status_mask like so: + * + * --------------------- + * | ... | ISR1 | ISR0 | + * --------------------- + * .. 15 8 7 0 + */ + + up->port.read_status_mask = (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME | + SAB82532_ISR0_RFO | SAB82532_ISR0_RPF | + SAB82532_ISR0_CDSC); + up->port.read_status_mask |= (SAB82532_ISR1_CSC | + SAB82532_ISR1_ALLS | + SAB82532_ISR1_XPR) << 8; + if (iflag & INPCK) + up->port.read_status_mask |= (SAB82532_ISR0_PERR | + SAB82532_ISR0_FERR); + if (iflag & (IGNBRK | BRKINT | PARMRK)) + up->port.read_status_mask |= (SAB82532_ISR1_BRK << 8); + + /* + * Characteres to ignore + */ + up->port.ignore_status_mask = 0; + if (iflag & IGNPAR) + up->port.ignore_status_mask |= (SAB82532_ISR0_PERR | + SAB82532_ISR0_FERR); + if (iflag & IGNBRK) { + up->port.ignore_status_mask |= (SAB82532_ISR1_BRK << 8); + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (iflag & IGNPAR) + up->port.ignore_status_mask |= SAB82532_ISR0_RFO; + } + + /* + * ignore all characters if CREAD is not set + */ + if ((cflag & CREAD) == 0) + up->port.ignore_status_mask |= (SAB82532_ISR0_RPF | + SAB82532_ISR0_TCD); + + uart_update_timeout(&up->port, cflag, + (up->port.uartclk / (16 * quot))); + + /* Now schedule a register update when the chip's + * transmitter is idle. + */ + up->cached_mode |= SAB82532_MODE_RAC; + set_bit(SAB82532_REGS_PENDING, &up->irqflags); + if (test_bit(SAB82532_XPR, &up->irqflags)) + sunsab_tx_idle(up); +} + +/* port->lock is not held. */ +static void sunsab_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_sunsab_port *up = + container_of(port, struct uart_sunsab_port, port); + unsigned long flags; + unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000); + unsigned int quot = uart_get_divisor(port, baud); + + spin_lock_irqsave(&up->port.lock, flags); + sunsab_convert_to_sab(up, termios->c_cflag, termios->c_iflag, baud, quot); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static const char *sunsab_type(struct uart_port *port) +{ + struct uart_sunsab_port *up = (void *)port; + static char buf[36]; + + sprintf(buf, "SAB82532 %s", sab82532_version[up->type]); + return buf; +} + +static void sunsab_release_port(struct uart_port *port) +{ +} + +static int sunsab_request_port(struct uart_port *port) +{ + return 0; +} + +static void sunsab_config_port(struct uart_port *port, int flags) +{ +} + +static int sunsab_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + return -EINVAL; +} + +static const struct uart_ops sunsab_pops = { + .tx_empty = sunsab_tx_empty, + .set_mctrl = sunsab_set_mctrl, + .get_mctrl = sunsab_get_mctrl, + .stop_tx = sunsab_stop_tx, + .start_tx = sunsab_start_tx, + .send_xchar = sunsab_send_xchar, + .stop_rx = sunsab_stop_rx, + .break_ctl = sunsab_break_ctl, + .startup = sunsab_startup, + .shutdown = sunsab_shutdown, + .set_termios = sunsab_set_termios, + .type = sunsab_type, + .release_port = sunsab_release_port, + .request_port = sunsab_request_port, + .config_port = sunsab_config_port, + .verify_port = sunsab_verify_port, +}; + +static struct uart_driver sunsab_reg = { + .owner = THIS_MODULE, + .driver_name = "sunsab", + .dev_name = "ttyS", + .major = TTY_MAJOR, +}; + +static struct uart_sunsab_port *sunsab_ports; + +#ifdef CONFIG_SERIAL_SUNSAB_CONSOLE + +static void sunsab_console_putchar(struct uart_port *port, int c) +{ + struct uart_sunsab_port *up = + container_of(port, struct uart_sunsab_port, port); + + sunsab_tec_wait(up); + writeb(c, &up->regs->w.tic); +} + +static void sunsab_console_write(struct console *con, const char *s, unsigned n) +{ + struct uart_sunsab_port *up = &sunsab_ports[con->index]; + unsigned long flags; + int locked = 1; + + if (up->port.sysrq || oops_in_progress) + locked = spin_trylock_irqsave(&up->port.lock, flags); + else + spin_lock_irqsave(&up->port.lock, flags); + + uart_console_write(&up->port, s, n, sunsab_console_putchar); + sunsab_tec_wait(up); + + if (locked) + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static int sunsab_console_setup(struct console *con, char *options) +{ + struct uart_sunsab_port *up = &sunsab_ports[con->index]; + unsigned long flags; + unsigned int baud, quot; + + /* + * The console framework calls us for each and every port + * registered. Defer the console setup until the requested + * port has been properly discovered. A bit of a hack, + * though... + */ + if (up->port.type != PORT_SUNSAB) + return -EINVAL; + + printk("Console: ttyS%d (SAB82532)\n", + (sunsab_reg.minor - 64) + con->index); + + sunserial_console_termios(con, up->port.dev->of_node); + + switch (con->cflag & CBAUD) { + case B150: baud = 150; break; + case B300: baud = 300; break; + case B600: baud = 600; break; + case B1200: baud = 1200; break; + case B2400: baud = 2400; break; + case B4800: baud = 4800; break; + default: case B9600: baud = 9600; break; + case B19200: baud = 19200; break; + case B38400: baud = 38400; break; + case B57600: baud = 57600; break; + case B115200: baud = 115200; break; + case B230400: baud = 230400; break; + case B460800: baud = 460800; break; + } + + /* + * Temporary fix. + */ + spin_lock_init(&up->port.lock); + + /* + * Initialize the hardware + */ + sunsab_startup(&up->port); + + spin_lock_irqsave(&up->port.lock, flags); + + /* + * Finally, enable interrupts + */ + up->interrupt_mask0 = SAB82532_IMR0_PERR | SAB82532_IMR0_FERR | + SAB82532_IMR0_PLLA | SAB82532_IMR0_CDSC; + writeb(up->interrupt_mask0, &up->regs->w.imr0); + up->interrupt_mask1 = SAB82532_IMR1_BRKT | SAB82532_IMR1_ALLS | + SAB82532_IMR1_XOFF | SAB82532_IMR1_TIN | + SAB82532_IMR1_CSC | SAB82532_IMR1_XON | + SAB82532_IMR1_XPR; + writeb(up->interrupt_mask1, &up->regs->w.imr1); + + quot = uart_get_divisor(&up->port, baud); + sunsab_convert_to_sab(up, con->cflag, 0, baud, quot); + sunsab_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS); + + spin_unlock_irqrestore(&up->port.lock, flags); + + return 0; +} + +static struct console sunsab_console = { + .name = "ttyS", + .write = sunsab_console_write, + .device = uart_console_device, + .setup = sunsab_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &sunsab_reg, +}; + +static inline struct console *SUNSAB_CONSOLE(void) +{ + return &sunsab_console; +} +#else +#define SUNSAB_CONSOLE() (NULL) +#define sunsab_console_init() do { } while (0) +#endif + +static int sunsab_init_one(struct uart_sunsab_port *up, + struct platform_device *op, + unsigned long offset, + int line) +{ + up->port.line = line; + up->port.dev = &op->dev; + + up->port.mapbase = op->resource[0].start + offset; + up->port.membase = of_ioremap(&op->resource[0], offset, + sizeof(union sab82532_async_regs), + "sab"); + if (!up->port.membase) + return -ENOMEM; + up->regs = (union sab82532_async_regs __iomem *) up->port.membase; + + up->port.irq = op->archdata.irqs[0]; + + up->port.fifosize = SAB82532_XMIT_FIFO_SIZE; + up->port.iotype = UPIO_MEM; + up->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_SUNSAB_CONSOLE); + + writeb(SAB82532_IPC_IC_ACT_LOW, &up->regs->w.ipc); + + up->port.ops = &sunsab_pops; + up->port.type = PORT_SUNSAB; + up->port.uartclk = SAB_BASE_BAUD; + + up->type = readb(&up->regs->r.vstr) & 0x0f; + writeb(~((1 << 1) | (1 << 2) | (1 << 4)), &up->regs->w.pcr); + writeb(0xff, &up->regs->w.pim); + if ((up->port.line & 0x1) == 0) { + up->pvr_dsr_bit = (1 << 0); + up->pvr_dtr_bit = (1 << 1); + up->gis_shift = 2; + } else { + up->pvr_dsr_bit = (1 << 3); + up->pvr_dtr_bit = (1 << 2); + up->gis_shift = 0; + } + up->cached_pvr = (1 << 1) | (1 << 2) | (1 << 4); + writeb(up->cached_pvr, &up->regs->w.pvr); + up->cached_mode = readb(&up->regs->rw.mode); + up->cached_mode |= SAB82532_MODE_FRTS; + writeb(up->cached_mode, &up->regs->rw.mode); + up->cached_mode |= SAB82532_MODE_RTS; + writeb(up->cached_mode, &up->regs->rw.mode); + + up->tec_timeout = SAB82532_MAX_TEC_TIMEOUT; + up->cec_timeout = SAB82532_MAX_CEC_TIMEOUT; + + return 0; +} + +static int sab_probe(struct platform_device *op) +{ + static int inst; + struct uart_sunsab_port *up; + int err; + + up = &sunsab_ports[inst * 2]; + + err = sunsab_init_one(&up[0], op, + 0, + (inst * 2) + 0); + if (err) + goto out; + + err = sunsab_init_one(&up[1], op, + sizeof(union sab82532_async_regs), + (inst * 2) + 1); + if (err) + goto out1; + + sunserial_console_match(SUNSAB_CONSOLE(), op->dev.of_node, + &sunsab_reg, up[0].port.line, + false); + + sunserial_console_match(SUNSAB_CONSOLE(), op->dev.of_node, + &sunsab_reg, up[1].port.line, + false); + + err = uart_add_one_port(&sunsab_reg, &up[0].port); + if (err) + goto out2; + + err = uart_add_one_port(&sunsab_reg, &up[1].port); + if (err) + goto out3; + + platform_set_drvdata(op, &up[0]); + + inst++; + + return 0; + +out3: + uart_remove_one_port(&sunsab_reg, &up[0].port); +out2: + of_iounmap(&op->resource[0], + up[1].port.membase, + sizeof(union sab82532_async_regs)); +out1: + of_iounmap(&op->resource[0], + up[0].port.membase, + sizeof(union sab82532_async_regs)); +out: + return err; +} + +static int sab_remove(struct platform_device *op) +{ + struct uart_sunsab_port *up = platform_get_drvdata(op); + + uart_remove_one_port(&sunsab_reg, &up[1].port); + uart_remove_one_port(&sunsab_reg, &up[0].port); + of_iounmap(&op->resource[0], + up[1].port.membase, + sizeof(union sab82532_async_regs)); + of_iounmap(&op->resource[0], + up[0].port.membase, + sizeof(union sab82532_async_regs)); + + return 0; +} + +static const struct of_device_id sab_match[] = { + { + .name = "se", + }, + { + .name = "serial", + .compatible = "sab82532", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, sab_match); + +static struct platform_driver sab_driver = { + .driver = { + .name = "sab", + .of_match_table = sab_match, + }, + .probe = sab_probe, + .remove = sab_remove, +}; + +static int __init sunsab_init(void) +{ + struct device_node *dp; + int err; + int num_channels = 0; + + for_each_node_by_name(dp, "se") + num_channels += 2; + for_each_node_by_name(dp, "serial") { + if (of_device_is_compatible(dp, "sab82532")) + num_channels += 2; + } + + if (num_channels) { + sunsab_ports = kcalloc(num_channels, + sizeof(struct uart_sunsab_port), + GFP_KERNEL); + if (!sunsab_ports) + return -ENOMEM; + + err = sunserial_register_minors(&sunsab_reg, num_channels); + if (err) { + kfree(sunsab_ports); + sunsab_ports = NULL; + + return err; + } + } + + err = platform_driver_register(&sab_driver); + if (err) { + kfree(sunsab_ports); + sunsab_ports = NULL; + } + + return err; +} + +static void __exit sunsab_exit(void) +{ + platform_driver_unregister(&sab_driver); + if (sunsab_reg.nr) { + sunserial_unregister_minors(&sunsab_reg, sunsab_reg.nr); + } + + kfree(sunsab_ports); + sunsab_ports = NULL; +} + +module_init(sunsab_init); +module_exit(sunsab_exit); + +MODULE_AUTHOR("Eddie C. Dost and David S. Miller"); +MODULE_DESCRIPTION("Sun SAB82532 serial port driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/sunsab.h b/drivers/tty/serial/sunsab.h new file mode 100644 index 000000000..1644031aa --- /dev/null +++ b/drivers/tty/serial/sunsab.h @@ -0,0 +1,323 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* sunsab.h: Register Definitions for the Siemens SAB82532 DUSCC + * + * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) + */ + +#ifndef _SUNSAB_H +#define _SUNSAB_H + +struct sab82532_async_rd_regs { + u8 rfifo[0x20]; /* Receive FIFO */ + u8 star; /* Status Register */ + u8 __pad1; + u8 mode; /* Mode Register */ + u8 timr; /* Timer Register */ + u8 xon; /* XON Character */ + u8 xoff; /* XOFF Character */ + u8 tcr; /* Termination Character Register */ + u8 dafo; /* Data Format */ + u8 rfc; /* RFIFO Control Register */ + u8 __pad2; + u8 rbcl; /* Receive Byte Count Low */ + u8 rbch; /* Receive Byte Count High */ + u8 ccr0; /* Channel Configuration Register 0 */ + u8 ccr1; /* Channel Configuration Register 1 */ + u8 ccr2; /* Channel Configuration Register 2 */ + u8 ccr3; /* Channel Configuration Register 3 */ + u8 __pad3[4]; + u8 vstr; /* Version Status Register */ + u8 __pad4[3]; + u8 gis; /* Global Interrupt Status */ + u8 ipc; /* Interrupt Port Configuration */ + u8 isr0; /* Interrupt Status 0 */ + u8 isr1; /* Interrupt Status 1 */ + u8 pvr; /* Port Value Register */ + u8 pis; /* Port Interrupt Status */ + u8 pcr; /* Port Configuration Register */ + u8 ccr4; /* Channel Configuration Register 4 */ +}; + +struct sab82532_async_wr_regs { + u8 xfifo[0x20]; /* Transmit FIFO */ + u8 cmdr; /* Command Register */ + u8 __pad1; + u8 mode; + u8 timr; + u8 xon; + u8 xoff; + u8 tcr; + u8 dafo; + u8 rfc; + u8 __pad2; + u8 xbcl; /* Transmit Byte Count Low */ + u8 xbch; /* Transmit Byte Count High */ + u8 ccr0; + u8 ccr1; + u8 ccr2; + u8 ccr3; + u8 tsax; /* Time-Slot Assignment Reg. Transmit */ + u8 tsar; /* Time-Slot Assignment Reg. Receive */ + u8 xccr; /* Transmit Channel Capacity Register */ + u8 rccr; /* Receive Channel Capacity Register */ + u8 bgr; /* Baud Rate Generator Register */ + u8 tic; /* Transmit Immediate Character */ + u8 mxn; /* Mask XON Character */ + u8 mxf; /* Mask XOFF Character */ + u8 iva; /* Interrupt Vector Address */ + u8 ipc; + u8 imr0; /* Interrupt Mask Register 0 */ + u8 imr1; /* Interrupt Mask Register 1 */ + u8 pvr; + u8 pim; /* Port Interrupt Mask */ + u8 pcr; + u8 ccr4; +}; + +struct sab82532_async_rw_regs { /* Read/Write registers */ + u8 __pad1[0x20]; + u8 __pad2; + u8 __pad3; + u8 mode; + u8 timr; + u8 xon; + u8 xoff; + u8 tcr; + u8 dafo; + u8 rfc; + u8 __pad4; + u8 __pad5; + u8 __pad6; + u8 ccr0; + u8 ccr1; + u8 ccr2; + u8 ccr3; + u8 __pad7; + u8 __pad8; + u8 __pad9; + u8 __pad10; + u8 __pad11; + u8 __pad12; + u8 __pad13; + u8 __pad14; + u8 __pad15; + u8 ipc; + u8 __pad16; + u8 __pad17; + u8 pvr; + u8 __pad18; + u8 pcr; + u8 ccr4; +}; + +union sab82532_async_regs { + __volatile__ struct sab82532_async_rd_regs r; + __volatile__ struct sab82532_async_wr_regs w; + __volatile__ struct sab82532_async_rw_regs rw; +}; + +union sab82532_irq_status { + unsigned short stat; + struct { + unsigned char isr0; + unsigned char isr1; + } sreg; +}; + +/* irqflags bits */ +#define SAB82532_ALLS 0x00000001 +#define SAB82532_XPR 0x00000002 +#define SAB82532_REGS_PENDING 0x00000004 + +/* RFIFO Status Byte */ +#define SAB82532_RSTAT_PE 0x80 +#define SAB82532_RSTAT_FE 0x40 +#define SAB82532_RSTAT_PARITY 0x01 + +/* Status Register (STAR) */ +#define SAB82532_STAR_XDOV 0x80 +#define SAB82532_STAR_XFW 0x40 +#define SAB82532_STAR_RFNE 0x20 +#define SAB82532_STAR_FCS 0x10 +#define SAB82532_STAR_TEC 0x08 +#define SAB82532_STAR_CEC 0x04 +#define SAB82532_STAR_CTS 0x02 + +/* Command Register (CMDR) */ +#define SAB82532_CMDR_RMC 0x80 +#define SAB82532_CMDR_RRES 0x40 +#define SAB82532_CMDR_RFRD 0x20 +#define SAB82532_CMDR_STI 0x10 +#define SAB82532_CMDR_XF 0x08 +#define SAB82532_CMDR_XRES 0x01 + +/* Mode Register (MODE) */ +#define SAB82532_MODE_FRTS 0x40 +#define SAB82532_MODE_FCTS 0x20 +#define SAB82532_MODE_FLON 0x10 +#define SAB82532_MODE_RAC 0x08 +#define SAB82532_MODE_RTS 0x04 +#define SAB82532_MODE_TRS 0x02 +#define SAB82532_MODE_TLP 0x01 + +/* Timer Register (TIMR) */ +#define SAB82532_TIMR_CNT_MASK 0xe0 +#define SAB82532_TIMR_VALUE_MASK 0x1f + +/* Data Format (DAFO) */ +#define SAB82532_DAFO_XBRK 0x40 +#define SAB82532_DAFO_STOP 0x20 +#define SAB82532_DAFO_PAR_SPACE 0x00 +#define SAB82532_DAFO_PAR_ODD 0x08 +#define SAB82532_DAFO_PAR_EVEN 0x10 +#define SAB82532_DAFO_PAR_MARK 0x18 +#define SAB82532_DAFO_PARE 0x04 +#define SAB82532_DAFO_CHL8 0x00 +#define SAB82532_DAFO_CHL7 0x01 +#define SAB82532_DAFO_CHL6 0x02 +#define SAB82532_DAFO_CHL5 0x03 + +/* RFIFO Control Register (RFC) */ +#define SAB82532_RFC_DPS 0x40 +#define SAB82532_RFC_DXS 0x20 +#define SAB82532_RFC_RFDF 0x10 +#define SAB82532_RFC_RFTH_1 0x00 +#define SAB82532_RFC_RFTH_4 0x04 +#define SAB82532_RFC_RFTH_16 0x08 +#define SAB82532_RFC_RFTH_32 0x0c +#define SAB82532_RFC_TCDE 0x01 + +/* Received Byte Count High (RBCH) */ +#define SAB82532_RBCH_DMA 0x80 +#define SAB82532_RBCH_CAS 0x20 + +/* Transmit Byte Count High (XBCH) */ +#define SAB82532_XBCH_DMA 0x80 +#define SAB82532_XBCH_CAS 0x20 +#define SAB82532_XBCH_XC 0x10 + +/* Channel Configuration Register 0 (CCR0) */ +#define SAB82532_CCR0_PU 0x80 +#define SAB82532_CCR0_MCE 0x40 +#define SAB82532_CCR0_SC_NRZ 0x00 +#define SAB82532_CCR0_SC_NRZI 0x08 +#define SAB82532_CCR0_SC_FM0 0x10 +#define SAB82532_CCR0_SC_FM1 0x14 +#define SAB82532_CCR0_SC_MANCH 0x18 +#define SAB82532_CCR0_SM_HDLC 0x00 +#define SAB82532_CCR0_SM_SDLC_LOOP 0x01 +#define SAB82532_CCR0_SM_BISYNC 0x02 +#define SAB82532_CCR0_SM_ASYNC 0x03 + +/* Channel Configuration Register 1 (CCR1) */ +#define SAB82532_CCR1_ODS 0x10 +#define SAB82532_CCR1_BCR 0x08 +#define SAB82532_CCR1_CM_MASK 0x07 + +/* Channel Configuration Register 2 (CCR2) */ +#define SAB82532_CCR2_SOC1 0x80 +#define SAB82532_CCR2_SOC0 0x40 +#define SAB82532_CCR2_BR9 0x80 +#define SAB82532_CCR2_BR8 0x40 +#define SAB82532_CCR2_BDF 0x20 +#define SAB82532_CCR2_SSEL 0x10 +#define SAB82532_CCR2_XCS0 0x20 +#define SAB82532_CCR2_RCS0 0x10 +#define SAB82532_CCR2_TOE 0x08 +#define SAB82532_CCR2_RWX 0x04 +#define SAB82532_CCR2_DIV 0x01 + +/* Channel Configuration Register 3 (CCR3) */ +#define SAB82532_CCR3_PSD 0x01 + +/* Time Slot Assignment Register Transmit (TSAX) */ +#define SAB82532_TSAX_TSNX_MASK 0xfc +#define SAB82532_TSAX_XCS2 0x02 /* see also CCR2 */ +#define SAB82532_TSAX_XCS1 0x01 + +/* Time Slot Assignment Register Receive (TSAR) */ +#define SAB82532_TSAR_TSNR_MASK 0xfc +#define SAB82532_TSAR_RCS2 0x02 /* see also CCR2 */ +#define SAB82532_TSAR_RCS1 0x01 + +/* Version Status Register (VSTR) */ +#define SAB82532_VSTR_CD 0x80 +#define SAB82532_VSTR_DPLA 0x40 +#define SAB82532_VSTR_VN_MASK 0x0f +#define SAB82532_VSTR_VN_1 0x00 +#define SAB82532_VSTR_VN_2 0x01 +#define SAB82532_VSTR_VN_3_2 0x02 + +/* Global Interrupt Status Register (GIS) */ +#define SAB82532_GIS_PI 0x80 +#define SAB82532_GIS_ISA1 0x08 +#define SAB82532_GIS_ISA0 0x04 +#define SAB82532_GIS_ISB1 0x02 +#define SAB82532_GIS_ISB0 0x01 + +/* Interrupt Vector Address (IVA) */ +#define SAB82532_IVA_MASK 0xf1 + +/* Interrupt Port Configuration (IPC) */ +#define SAB82532_IPC_VIS 0x80 +#define SAB82532_IPC_SLA1 0x10 +#define SAB82532_IPC_SLA0 0x08 +#define SAB82532_IPC_CASM 0x04 +#define SAB82532_IPC_IC_OPEN_DRAIN 0x00 +#define SAB82532_IPC_IC_ACT_LOW 0x01 +#define SAB82532_IPC_IC_ACT_HIGH 0x03 + +/* Interrupt Status Register 0 (ISR0) */ +#define SAB82532_ISR0_TCD 0x80 +#define SAB82532_ISR0_TIME 0x40 +#define SAB82532_ISR0_PERR 0x20 +#define SAB82532_ISR0_FERR 0x10 +#define SAB82532_ISR0_PLLA 0x08 +#define SAB82532_ISR0_CDSC 0x04 +#define SAB82532_ISR0_RFO 0x02 +#define SAB82532_ISR0_RPF 0x01 + +/* Interrupt Status Register 1 (ISR1) */ +#define SAB82532_ISR1_BRK 0x80 +#define SAB82532_ISR1_BRKT 0x40 +#define SAB82532_ISR1_ALLS 0x20 +#define SAB82532_ISR1_XOFF 0x10 +#define SAB82532_ISR1_TIN 0x08 +#define SAB82532_ISR1_CSC 0x04 +#define SAB82532_ISR1_XON 0x02 +#define SAB82532_ISR1_XPR 0x01 + +/* Interrupt Mask Register 0 (IMR0) */ +#define SAB82532_IMR0_TCD 0x80 +#define SAB82532_IMR0_TIME 0x40 +#define SAB82532_IMR0_PERR 0x20 +#define SAB82532_IMR0_FERR 0x10 +#define SAB82532_IMR0_PLLA 0x08 +#define SAB82532_IMR0_CDSC 0x04 +#define SAB82532_IMR0_RFO 0x02 +#define SAB82532_IMR0_RPF 0x01 + +/* Interrupt Mask Register 1 (IMR1) */ +#define SAB82532_IMR1_BRK 0x80 +#define SAB82532_IMR1_BRKT 0x40 +#define SAB82532_IMR1_ALLS 0x20 +#define SAB82532_IMR1_XOFF 0x10 +#define SAB82532_IMR1_TIN 0x08 +#define SAB82532_IMR1_CSC 0x04 +#define SAB82532_IMR1_XON 0x02 +#define SAB82532_IMR1_XPR 0x01 + +/* Port Interrupt Status Register (PIS) */ +#define SAB82532_PIS_SYNC_B 0x08 +#define SAB82532_PIS_DTR_B 0x04 +#define SAB82532_PIS_DTR_A 0x02 +#define SAB82532_PIS_SYNC_A 0x01 + +/* Channel Configuration Register 4 (CCR4) */ +#define SAB82532_CCR4_MCK4 0x80 +#define SAB82532_CCR4_EBRG 0x40 +#define SAB82532_CCR4_TST1 0x20 +#define SAB82532_CCR4_ICD 0x10 + + +#endif /* !(_SUNSAB_H) */ diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c new file mode 100644 index 000000000..319e5ceb6 --- /dev/null +++ b/drivers/tty/serial/sunsu.c @@ -0,0 +1,1632 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * su.c: Small serial driver for keyboard/mouse interface on sparc32/PCI + * + * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) + * Copyright (C) 1998-1999 Pete Zaitcev (zaitcev@yahoo.com) + * + * This is mainly a variation of 8250.c, credits go to authors mentioned + * therein. In fact this driver should be merged into the generic 8250.c + * infrastructure perhaps using a 8250_sparc.c module. + * + * Fixed to use tty_get_baud_rate(). + * Theodore Ts'o , 2001-Oct-12 + * + * Converted to new 2.5.x UART layer. + * David S. Miller (davem@davemloft.net), 2002-Jul-29 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#ifdef CONFIG_SERIO +#include +#endif +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include + +/* We are on a NS PC87303 clocked with 24.0 MHz, which results + * in a UART clock of 1.8462 MHz. + */ +#define SU_BASE_BAUD (1846200 / 16) + +enum su_type { SU_PORT_NONE, SU_PORT_MS, SU_PORT_KBD, SU_PORT_PORT }; +static char *su_typev[] = { "su(???)", "su(mouse)", "su(kbd)", "su(serial)" }; + +struct serial_uart_config { + char *name; + int dfl_xmit_fifo_size; + int flags; +}; + +/* + * Here we define the default xmit fifo size used for each type of UART. + */ +static const struct serial_uart_config uart_config[] = { + { "unknown", 1, 0 }, + { "8250", 1, 0 }, + { "16450", 1, 0 }, + { "16550", 1, 0 }, + { "16550A", 16, UART_CLEAR_FIFO | UART_USE_FIFO }, + { "Cirrus", 1, 0 }, + { "ST16650", 1, UART_CLEAR_FIFO | UART_STARTECH }, + { "ST16650V2", 32, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH }, + { "TI16750", 64, UART_CLEAR_FIFO | UART_USE_FIFO }, + { "Startech", 1, 0 }, + { "16C950/954", 128, UART_CLEAR_FIFO | UART_USE_FIFO }, + { "ST16654", 64, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH }, + { "XR16850", 128, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH }, + { "RSA", 2048, UART_CLEAR_FIFO | UART_USE_FIFO } +}; + +struct uart_sunsu_port { + struct uart_port port; + unsigned char acr; + unsigned char ier; + unsigned short rev; + unsigned char lcr; + unsigned int lsr_break_flag; + unsigned int cflag; + + /* Probing information. */ + enum su_type su_type; + unsigned int type_probed; /* XXX Stupid */ + unsigned long reg_size; + +#ifdef CONFIG_SERIO + struct serio serio; + int serio_open; +#endif +}; + +static unsigned int serial_in(struct uart_sunsu_port *up, int offset) +{ + offset <<= up->port.regshift; + + switch (up->port.iotype) { + case UPIO_HUB6: + outb(up->port.hub6 - 1 + offset, up->port.iobase); + return inb(up->port.iobase + 1); + + case UPIO_MEM: + return readb(up->port.membase + offset); + + default: + return inb(up->port.iobase + offset); + } +} + +static void serial_out(struct uart_sunsu_port *up, int offset, int value) +{ +#ifndef CONFIG_SPARC64 + /* + * MrCoffee has weird schematics: IRQ4 & P10(?) pins of SuperIO are + * connected with a gate then go to SlavIO. When IRQ4 goes tristated + * gate outputs a logical one. Since we use level triggered interrupts + * we have lockup and watchdog reset. We cannot mask IRQ because + * keyboard shares IRQ with us (Word has it as Bob Smelik's design). + * This problem is similar to what Alpha people suffer, see serial.c. + */ + if (offset == UART_MCR) + value |= UART_MCR_OUT2; +#endif + offset <<= up->port.regshift; + + switch (up->port.iotype) { + case UPIO_HUB6: + outb(up->port.hub6 - 1 + offset, up->port.iobase); + outb(value, up->port.iobase + 1); + break; + + case UPIO_MEM: + writeb(value, up->port.membase + offset); + break; + + default: + outb(value, up->port.iobase + offset); + } +} + +/* + * We used to support using pause I/O for certain machines. We + * haven't supported this for a while, but just in case it's badly + * needed for certain old 386 machines, I've left these #define's + * in.... + */ +#define serial_inp(up, offset) serial_in(up, offset) +#define serial_outp(up, offset, value) serial_out(up, offset, value) + + +/* + * For the 16C950 + */ +static void serial_icr_write(struct uart_sunsu_port *up, int offset, int value) +{ + serial_out(up, UART_SCR, offset); + serial_out(up, UART_ICR, value); +} + +#if 0 /* Unused currently */ +static unsigned int serial_icr_read(struct uart_sunsu_port *up, int offset) +{ + unsigned int value; + + serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD); + serial_out(up, UART_SCR, offset); + value = serial_in(up, UART_ICR); + serial_icr_write(up, UART_ACR, up->acr); + + return value; +} +#endif + +#ifdef CONFIG_SERIAL_8250_RSA +/* + * Attempts to turn on the RSA FIFO. Returns zero on failure. + * We set the port uart clock rate if we succeed. + */ +static int __enable_rsa(struct uart_sunsu_port *up) +{ + unsigned char mode; + int result; + + mode = serial_inp(up, UART_RSA_MSR); + result = mode & UART_RSA_MSR_FIFO; + + if (!result) { + serial_outp(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO); + mode = serial_inp(up, UART_RSA_MSR); + result = mode & UART_RSA_MSR_FIFO; + } + + if (result) + up->port.uartclk = SERIAL_RSA_BAUD_BASE * 16; + + return result; +} + +static void enable_rsa(struct uart_sunsu_port *up) +{ + if (up->port.type == PORT_RSA) { + if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) { + spin_lock_irq(&up->port.lock); + __enable_rsa(up); + spin_unlock_irq(&up->port.lock); + } + if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) + serial_outp(up, UART_RSA_FRR, 0); + } +} + +/* + * Attempts to turn off the RSA FIFO. Returns zero on failure. + * It is unknown why interrupts were disabled in here. However, + * the caller is expected to preserve this behaviour by grabbing + * the spinlock before calling this function. + */ +static void disable_rsa(struct uart_sunsu_port *up) +{ + unsigned char mode; + int result; + + if (up->port.type == PORT_RSA && + up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) { + spin_lock_irq(&up->port.lock); + + mode = serial_inp(up, UART_RSA_MSR); + result = !(mode & UART_RSA_MSR_FIFO); + + if (!result) { + serial_outp(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO); + mode = serial_inp(up, UART_RSA_MSR); + result = !(mode & UART_RSA_MSR_FIFO); + } + + if (result) + up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16; + spin_unlock_irq(&up->port.lock); + } +} +#endif /* CONFIG_SERIAL_8250_RSA */ + +static inline void __stop_tx(struct uart_sunsu_port *p) +{ + if (p->ier & UART_IER_THRI) { + p->ier &= ~UART_IER_THRI; + serial_out(p, UART_IER, p->ier); + } +} + +static void sunsu_stop_tx(struct uart_port *port) +{ + struct uart_sunsu_port *up = + container_of(port, struct uart_sunsu_port, port); + + __stop_tx(up); + + /* + * We really want to stop the transmitter from sending. + */ + if (up->port.type == PORT_16C950) { + up->acr |= UART_ACR_TXDIS; + serial_icr_write(up, UART_ACR, up->acr); + } +} + +static void sunsu_start_tx(struct uart_port *port) +{ + struct uart_sunsu_port *up = + container_of(port, struct uart_sunsu_port, port); + + if (!(up->ier & UART_IER_THRI)) { + up->ier |= UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } + + /* + * Re-enable the transmitter if we disabled it. + */ + if (up->port.type == PORT_16C950 && up->acr & UART_ACR_TXDIS) { + up->acr &= ~UART_ACR_TXDIS; + serial_icr_write(up, UART_ACR, up->acr); + } +} + +static void sunsu_stop_rx(struct uart_port *port) +{ + struct uart_sunsu_port *up = + container_of(port, struct uart_sunsu_port, port); + + up->ier &= ~UART_IER_RLSI; + up->port.read_status_mask &= ~UART_LSR_DR; + serial_out(up, UART_IER, up->ier); +} + +static void sunsu_enable_ms(struct uart_port *port) +{ + struct uart_sunsu_port *up = + container_of(port, struct uart_sunsu_port, port); + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + up->ier |= UART_IER_MSI; + serial_out(up, UART_IER, up->ier); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static void +receive_chars(struct uart_sunsu_port *up, unsigned char *status) +{ + struct tty_port *port = &up->port.state->port; + unsigned char ch, flag; + int max_count = 256; + int saw_console_brk = 0; + + do { + ch = serial_inp(up, UART_RX); + flag = TTY_NORMAL; + up->port.icount.rx++; + + if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE | + UART_LSR_FE | UART_LSR_OE))) { + /* + * For statistics only + */ + if (*status & UART_LSR_BI) { + *status &= ~(UART_LSR_FE | UART_LSR_PE); + up->port.icount.brk++; + if (up->port.cons != NULL && + up->port.line == up->port.cons->index) + saw_console_brk = 1; + /* + * We do the SysRQ and SAK checking + * here because otherwise the break + * may get masked by ignore_status_mask + * or read_status_mask. + */ + if (uart_handle_break(&up->port)) + goto ignore_char; + } else if (*status & UART_LSR_PE) + up->port.icount.parity++; + else if (*status & UART_LSR_FE) + up->port.icount.frame++; + if (*status & UART_LSR_OE) + up->port.icount.overrun++; + + /* + * Mask off conditions which should be ingored. + */ + *status &= up->port.read_status_mask; + + if (up->port.cons != NULL && + up->port.line == up->port.cons->index) { + /* Recover the break flag from console xmit */ + *status |= up->lsr_break_flag; + up->lsr_break_flag = 0; + } + + if (*status & UART_LSR_BI) { + flag = TTY_BREAK; + } else if (*status & UART_LSR_PE) + flag = TTY_PARITY; + else if (*status & UART_LSR_FE) + flag = TTY_FRAME; + } + if (uart_handle_sysrq_char(&up->port, ch)) + goto ignore_char; + if ((*status & up->port.ignore_status_mask) == 0) + tty_insert_flip_char(port, ch, flag); + if (*status & UART_LSR_OE) + /* + * Overrun is special, since it's reported + * immediately, and doesn't affect the current + * character. + */ + tty_insert_flip_char(port, 0, TTY_OVERRUN); + ignore_char: + *status = serial_inp(up, UART_LSR); + } while ((*status & UART_LSR_DR) && (max_count-- > 0)); + + if (saw_console_brk) + sun_do_break(); +} + +static void transmit_chars(struct uart_sunsu_port *up) +{ + struct circ_buf *xmit = &up->port.state->xmit; + int count; + + if (up->port.x_char) { + serial_outp(up, UART_TX, up->port.x_char); + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + if (uart_tx_stopped(&up->port)) { + sunsu_stop_tx(&up->port); + return; + } + if (uart_circ_empty(xmit)) { + __stop_tx(up); + return; + } + + count = up->port.fifosize; + do { + serial_out(up, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + if (uart_circ_empty(xmit)) + __stop_tx(up); +} + +static void check_modem_status(struct uart_sunsu_port *up) +{ + int status; + + status = serial_in(up, UART_MSR); + + if ((status & UART_MSR_ANY_DELTA) == 0) + return; + + if (status & UART_MSR_TERI) + up->port.icount.rng++; + if (status & UART_MSR_DDSR) + up->port.icount.dsr++; + if (status & UART_MSR_DDCD) + uart_handle_dcd_change(&up->port, status & UART_MSR_DCD); + if (status & UART_MSR_DCTS) + uart_handle_cts_change(&up->port, status & UART_MSR_CTS); + + wake_up_interruptible(&up->port.state->port.delta_msr_wait); +} + +static irqreturn_t sunsu_serial_interrupt(int irq, void *dev_id) +{ + struct uart_sunsu_port *up = dev_id; + unsigned long flags; + unsigned char status; + + spin_lock_irqsave(&up->port.lock, flags); + + do { + status = serial_inp(up, UART_LSR); + if (status & UART_LSR_DR) + receive_chars(up, &status); + check_modem_status(up); + if (status & UART_LSR_THRE) + transmit_chars(up); + + spin_unlock_irqrestore(&up->port.lock, flags); + + tty_flip_buffer_push(&up->port.state->port); + + spin_lock_irqsave(&up->port.lock, flags); + + } while (!(serial_in(up, UART_IIR) & UART_IIR_NO_INT)); + + spin_unlock_irqrestore(&up->port.lock, flags); + + return IRQ_HANDLED; +} + +/* Separate interrupt handling path for keyboard/mouse ports. */ + +static void +sunsu_change_speed(struct uart_port *port, unsigned int cflag, + unsigned int iflag, unsigned int quot); + +static void sunsu_change_mouse_baud(struct uart_sunsu_port *up) +{ + unsigned int cur_cflag = up->cflag; + int quot, new_baud; + + up->cflag &= ~CBAUD; + up->cflag |= suncore_mouse_baud_cflag_next(cur_cflag, &new_baud); + + quot = up->port.uartclk / (16 * new_baud); + + sunsu_change_speed(&up->port, up->cflag, 0, quot); +} + +static void receive_kbd_ms_chars(struct uart_sunsu_port *up, int is_break) +{ + do { + unsigned char ch = serial_inp(up, UART_RX); + + /* Stop-A is handled by drivers/char/keyboard.c now. */ + if (up->su_type == SU_PORT_KBD) { +#ifdef CONFIG_SERIO + serio_interrupt(&up->serio, ch, 0); +#endif + } else if (up->su_type == SU_PORT_MS) { + int ret = suncore_mouse_baud_detection(ch, is_break); + + switch (ret) { + case 2: + sunsu_change_mouse_baud(up); + fallthrough; + case 1: + break; + + case 0: +#ifdef CONFIG_SERIO + serio_interrupt(&up->serio, ch, 0); +#endif + break; + } + } + } while (serial_in(up, UART_LSR) & UART_LSR_DR); +} + +static irqreturn_t sunsu_kbd_ms_interrupt(int irq, void *dev_id) +{ + struct uart_sunsu_port *up = dev_id; + + if (!(serial_in(up, UART_IIR) & UART_IIR_NO_INT)) { + unsigned char status = serial_inp(up, UART_LSR); + + if ((status & UART_LSR_DR) || (status & UART_LSR_BI)) + receive_kbd_ms_chars(up, (status & UART_LSR_BI) != 0); + } + + return IRQ_HANDLED; +} + +static unsigned int sunsu_tx_empty(struct uart_port *port) +{ + struct uart_sunsu_port *up = + container_of(port, struct uart_sunsu_port, port); + unsigned long flags; + unsigned int ret; + + spin_lock_irqsave(&up->port.lock, flags); + ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; + spin_unlock_irqrestore(&up->port.lock, flags); + + return ret; +} + +static unsigned int sunsu_get_mctrl(struct uart_port *port) +{ + struct uart_sunsu_port *up = + container_of(port, struct uart_sunsu_port, port); + unsigned char status; + unsigned int ret; + + status = serial_in(up, UART_MSR); + + ret = 0; + if (status & UART_MSR_DCD) + ret |= TIOCM_CAR; + if (status & UART_MSR_RI) + ret |= TIOCM_RNG; + if (status & UART_MSR_DSR) + ret |= TIOCM_DSR; + if (status & UART_MSR_CTS) + ret |= TIOCM_CTS; + return ret; +} + +static void sunsu_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_sunsu_port *up = + container_of(port, struct uart_sunsu_port, port); + unsigned char mcr = 0; + + if (mctrl & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (mctrl & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (mctrl & TIOCM_OUT1) + mcr |= UART_MCR_OUT1; + if (mctrl & TIOCM_OUT2) + mcr |= UART_MCR_OUT2; + if (mctrl & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + serial_out(up, UART_MCR, mcr); +} + +static void sunsu_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_sunsu_port *up = + container_of(port, struct uart_sunsu_port, port); + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + if (break_state == -1) + up->lcr |= UART_LCR_SBC; + else + up->lcr &= ~UART_LCR_SBC; + serial_out(up, UART_LCR, up->lcr); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static int sunsu_startup(struct uart_port *port) +{ + struct uart_sunsu_port *up = + container_of(port, struct uart_sunsu_port, port); + unsigned long flags; + int retval; + + if (up->port.type == PORT_16C950) { + /* Wake up and initialize UART */ + up->acr = 0; + serial_outp(up, UART_LCR, 0xBF); + serial_outp(up, UART_EFR, UART_EFR_ECB); + serial_outp(up, UART_IER, 0); + serial_outp(up, UART_LCR, 0); + serial_icr_write(up, UART_CSR, 0); /* Reset the UART */ + serial_outp(up, UART_LCR, 0xBF); + serial_outp(up, UART_EFR, UART_EFR_ECB); + serial_outp(up, UART_LCR, 0); + } + +#ifdef CONFIG_SERIAL_8250_RSA + /* + * If this is an RSA port, see if we can kick it up to the + * higher speed clock. + */ + enable_rsa(up); +#endif + + /* + * Clear the FIFO buffers and disable them. + * (they will be reenabled in set_termios()) + */ + if (uart_config[up->port.type].flags & UART_CLEAR_FIFO) { + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + serial_outp(up, UART_FCR, 0); + } + + /* + * Clear the interrupt registers. + */ + (void) serial_inp(up, UART_LSR); + (void) serial_inp(up, UART_RX); + (void) serial_inp(up, UART_IIR); + (void) serial_inp(up, UART_MSR); + + /* + * At this point, there's no way the LSR could still be 0xff; + * if it is, then bail out, because there's likely no UART + * here. + */ + if (!(up->port.flags & UPF_BUGGY_UART) && + (serial_inp(up, UART_LSR) == 0xff)) { + printk("ttyS%d: LSR safety check engaged!\n", up->port.line); + return -ENODEV; + } + + if (up->su_type != SU_PORT_PORT) { + retval = request_irq(up->port.irq, sunsu_kbd_ms_interrupt, + IRQF_SHARED, su_typev[up->su_type], up); + } else { + retval = request_irq(up->port.irq, sunsu_serial_interrupt, + IRQF_SHARED, su_typev[up->su_type], up); + } + if (retval) { + printk("su: Cannot register IRQ %d\n", up->port.irq); + return retval; + } + + /* + * Now, initialize the UART + */ + serial_outp(up, UART_LCR, UART_LCR_WLEN8); + + spin_lock_irqsave(&up->port.lock, flags); + + up->port.mctrl |= TIOCM_OUT2; + + sunsu_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * Finally, enable interrupts. Note: Modem status interrupts + * are set via set_termios(), which will be occurring imminently + * anyway, so we don't enable them here. + */ + up->ier = UART_IER_RLSI | UART_IER_RDI; + serial_outp(up, UART_IER, up->ier); + + if (up->port.flags & UPF_FOURPORT) { + unsigned int icp; + /* + * Enable interrupts on the AST Fourport board + */ + icp = (up->port.iobase & 0xfe0) | 0x01f; + outb_p(0x80, icp); + (void) inb_p(icp); + } + + /* + * And clear the interrupt registers again for luck. + */ + (void) serial_inp(up, UART_LSR); + (void) serial_inp(up, UART_RX); + (void) serial_inp(up, UART_IIR); + (void) serial_inp(up, UART_MSR); + + return 0; +} + +static void sunsu_shutdown(struct uart_port *port) +{ + struct uart_sunsu_port *up = + container_of(port, struct uart_sunsu_port, port); + unsigned long flags; + + /* + * Disable interrupts from this port + */ + up->ier = 0; + serial_outp(up, UART_IER, 0); + + spin_lock_irqsave(&up->port.lock, flags); + if (up->port.flags & UPF_FOURPORT) { + /* reset interrupts on the AST Fourport board */ + inb((up->port.iobase & 0xfe0) | 0x1f); + up->port.mctrl |= TIOCM_OUT1; + } else + up->port.mctrl &= ~TIOCM_OUT2; + + sunsu_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * Disable break condition and FIFOs + */ + serial_out(up, UART_LCR, serial_inp(up, UART_LCR) & ~UART_LCR_SBC); + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | + UART_FCR_CLEAR_XMIT); + serial_outp(up, UART_FCR, 0); + +#ifdef CONFIG_SERIAL_8250_RSA + /* + * Reset the RSA board back to 115kbps compat mode. + */ + disable_rsa(up); +#endif + + /* + * Read data port to reset things. + */ + (void) serial_in(up, UART_RX); + + free_irq(up->port.irq, up); +} + +static void +sunsu_change_speed(struct uart_port *port, unsigned int cflag, + unsigned int iflag, unsigned int quot) +{ + struct uart_sunsu_port *up = + container_of(port, struct uart_sunsu_port, port); + unsigned char cval, fcr = 0; + unsigned long flags; + + switch (cflag & CSIZE) { + case CS5: + cval = 0x00; + break; + case CS6: + cval = 0x01; + break; + case CS7: + cval = 0x02; + break; + default: + case CS8: + cval = 0x03; + break; + } + + if (cflag & CSTOPB) + cval |= 0x04; + if (cflag & PARENB) + cval |= UART_LCR_PARITY; + if (!(cflag & PARODD)) + cval |= UART_LCR_EPAR; +#ifdef CMSPAR + if (cflag & CMSPAR) + cval |= UART_LCR_SPAR; +#endif + + /* + * Work around a bug in the Oxford Semiconductor 952 rev B + * chip which causes it to seriously miscalculate baud rates + * when DLL is 0. + */ + if ((quot & 0xff) == 0 && up->port.type == PORT_16C950 && + up->rev == 0x5201) + quot ++; + + if (uart_config[up->port.type].flags & UART_USE_FIFO) { + if ((up->port.uartclk / quot) < (2400 * 16)) + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1; +#ifdef CONFIG_SERIAL_8250_RSA + else if (up->port.type == PORT_RSA) + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_14; +#endif + else + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_8; + } + if (up->port.type == PORT_16750) + fcr |= UART_FCR7_64BYTE; + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + spin_lock_irqsave(&up->port.lock, flags); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, cflag, (port->uartclk / (16 * quot))); + + up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + if (iflag & INPCK) + up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (iflag & (IGNBRK | BRKINT | PARMRK)) + up->port.read_status_mask |= UART_LSR_BI; + + /* + * Characteres to ignore + */ + up->port.ignore_status_mask = 0; + if (iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; + if (iflag & IGNBRK) { + up->port.ignore_status_mask |= UART_LSR_BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_OE; + } + + /* + * ignore all characters if CREAD is not set + */ + if ((cflag & CREAD) == 0) + up->port.ignore_status_mask |= UART_LSR_DR; + + /* + * CTS flow control flag and modem status interrupts + */ + up->ier &= ~UART_IER_MSI; + if (UART_ENABLE_MS(&up->port, cflag)) + up->ier |= UART_IER_MSI; + + serial_out(up, UART_IER, up->ier); + + if (uart_config[up->port.type].flags & UART_STARTECH) { + serial_outp(up, UART_LCR, 0xBF); + serial_outp(up, UART_EFR, cflag & CRTSCTS ? UART_EFR_CTS :0); + } + serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */ + serial_outp(up, UART_DLL, quot & 0xff); /* LS of divisor */ + serial_outp(up, UART_DLM, quot >> 8); /* MS of divisor */ + if (up->port.type == PORT_16750) + serial_outp(up, UART_FCR, fcr); /* set fcr */ + serial_outp(up, UART_LCR, cval); /* reset DLAB */ + up->lcr = cval; /* Save LCR */ + if (up->port.type != PORT_16750) { + if (fcr & UART_FCR_ENABLE_FIFO) { + /* emulated UARTs (Lucent Venus 167x) need two steps */ + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); + } + serial_outp(up, UART_FCR, fcr); /* set fcr */ + } + + up->cflag = cflag; + + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static void +sunsu_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + unsigned int baud, quot; + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + + sunsu_change_speed(port, termios->c_cflag, termios->c_iflag, quot); +} + +static void sunsu_release_port(struct uart_port *port) +{ +} + +static int sunsu_request_port(struct uart_port *port) +{ + return 0; +} + +static void sunsu_config_port(struct uart_port *port, int flags) +{ + struct uart_sunsu_port *up = + container_of(port, struct uart_sunsu_port, port); + + if (flags & UART_CONFIG_TYPE) { + /* + * We are supposed to call autoconfig here, but this requires + * splitting all the OBP probing crap from the UART probing. + * We'll do it when we kill sunsu.c altogether. + */ + port->type = up->type_probed; /* XXX */ + } +} + +static int +sunsu_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + return -EINVAL; +} + +static const char * +sunsu_type(struct uart_port *port) +{ + int type = port->type; + + if (type >= ARRAY_SIZE(uart_config)) + type = 0; + return uart_config[type].name; +} + +static const struct uart_ops sunsu_pops = { + .tx_empty = sunsu_tx_empty, + .set_mctrl = sunsu_set_mctrl, + .get_mctrl = sunsu_get_mctrl, + .stop_tx = sunsu_stop_tx, + .start_tx = sunsu_start_tx, + .stop_rx = sunsu_stop_rx, + .enable_ms = sunsu_enable_ms, + .break_ctl = sunsu_break_ctl, + .startup = sunsu_startup, + .shutdown = sunsu_shutdown, + .set_termios = sunsu_set_termios, + .type = sunsu_type, + .release_port = sunsu_release_port, + .request_port = sunsu_request_port, + .config_port = sunsu_config_port, + .verify_port = sunsu_verify_port, +}; + +#define UART_NR 4 + +static struct uart_sunsu_port sunsu_ports[UART_NR]; +static int nr_inst; /* Number of already registered ports */ + +#ifdef CONFIG_SERIO + +static DEFINE_SPINLOCK(sunsu_serio_lock); + +static int sunsu_serio_write(struct serio *serio, unsigned char ch) +{ + struct uart_sunsu_port *up = serio->port_data; + unsigned long flags; + int lsr; + + spin_lock_irqsave(&sunsu_serio_lock, flags); + + do { + lsr = serial_in(up, UART_LSR); + } while (!(lsr & UART_LSR_THRE)); + + /* Send the character out. */ + serial_out(up, UART_TX, ch); + + spin_unlock_irqrestore(&sunsu_serio_lock, flags); + + return 0; +} + +static int sunsu_serio_open(struct serio *serio) +{ + struct uart_sunsu_port *up = serio->port_data; + unsigned long flags; + int ret; + + spin_lock_irqsave(&sunsu_serio_lock, flags); + if (!up->serio_open) { + up->serio_open = 1; + ret = 0; + } else + ret = -EBUSY; + spin_unlock_irqrestore(&sunsu_serio_lock, flags); + + return ret; +} + +static void sunsu_serio_close(struct serio *serio) +{ + struct uart_sunsu_port *up = serio->port_data; + unsigned long flags; + + spin_lock_irqsave(&sunsu_serio_lock, flags); + up->serio_open = 0; + spin_unlock_irqrestore(&sunsu_serio_lock, flags); +} + +#endif /* CONFIG_SERIO */ + +static void sunsu_autoconfig(struct uart_sunsu_port *up) +{ + unsigned char status1, status2, scratch, scratch2, scratch3; + unsigned char save_lcr, save_mcr; + unsigned long flags; + + if (up->su_type == SU_PORT_NONE) + return; + + up->type_probed = PORT_UNKNOWN; + up->port.iotype = UPIO_MEM; + + spin_lock_irqsave(&up->port.lock, flags); + + if (!(up->port.flags & UPF_BUGGY_UART)) { + /* + * Do a simple existence test first; if we fail this, there's + * no point trying anything else. + * + * 0x80 is used as a nonsense port to prevent against false + * positives due to ISA bus float. The assumption is that + * 0x80 is a non-existent port; which should be safe since + * include/asm/io.h also makes this assumption. + */ + scratch = serial_inp(up, UART_IER); + serial_outp(up, UART_IER, 0); +#ifdef __i386__ + outb(0xff, 0x080); +#endif + scratch2 = serial_inp(up, UART_IER); + serial_outp(up, UART_IER, 0x0f); +#ifdef __i386__ + outb(0, 0x080); +#endif + scratch3 = serial_inp(up, UART_IER); + serial_outp(up, UART_IER, scratch); + if (scratch2 != 0 || scratch3 != 0x0F) + goto out; /* We failed; there's nothing here */ + } + + save_mcr = serial_in(up, UART_MCR); + save_lcr = serial_in(up, UART_LCR); + + /* + * Check to see if a UART is really there. Certain broken + * internal modems based on the Rockwell chipset fail this + * test, because they apparently don't implement the loopback + * test mode. So this test is skipped on the COM 1 through + * COM 4 ports. This *should* be safe, since no board + * manufacturer would be stupid enough to design a board + * that conflicts with COM 1-4 --- we hope! + */ + if (!(up->port.flags & UPF_SKIP_TEST)) { + serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A); + status1 = serial_inp(up, UART_MSR) & 0xF0; + serial_outp(up, UART_MCR, save_mcr); + if (status1 != 0x90) + goto out; /* We failed loopback test */ + } + serial_outp(up, UART_LCR, 0xBF); /* set up for StarTech test */ + serial_outp(up, UART_EFR, 0); /* EFR is the same as FCR */ + serial_outp(up, UART_LCR, 0); + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); + scratch = serial_in(up, UART_IIR) >> 6; + switch (scratch) { + case 0: + up->port.type = PORT_16450; + break; + case 1: + up->port.type = PORT_UNKNOWN; + break; + case 2: + up->port.type = PORT_16550; + break; + case 3: + up->port.type = PORT_16550A; + break; + } + if (up->port.type == PORT_16550A) { + /* Check for Startech UART's */ + serial_outp(up, UART_LCR, UART_LCR_DLAB); + if (serial_in(up, UART_EFR) == 0) { + up->port.type = PORT_16650; + } else { + serial_outp(up, UART_LCR, 0xBF); + if (serial_in(up, UART_EFR) == 0) + up->port.type = PORT_16650V2; + } + } + if (up->port.type == PORT_16550A) { + /* Check for TI 16750 */ + serial_outp(up, UART_LCR, save_lcr | UART_LCR_DLAB); + serial_outp(up, UART_FCR, + UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); + scratch = serial_in(up, UART_IIR) >> 5; + if (scratch == 7) { + /* + * If this is a 16750, and not a cheap UART + * clone, then it should only go into 64 byte + * mode if the UART_FCR7_64BYTE bit was set + * while UART_LCR_DLAB was latched. + */ + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_outp(up, UART_LCR, 0); + serial_outp(up, UART_FCR, + UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); + scratch = serial_in(up, UART_IIR) >> 5; + if (scratch == 6) + up->port.type = PORT_16750; + } + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); + } + serial_outp(up, UART_LCR, save_lcr); + if (up->port.type == PORT_16450) { + scratch = serial_in(up, UART_SCR); + serial_outp(up, UART_SCR, 0xa5); + status1 = serial_in(up, UART_SCR); + serial_outp(up, UART_SCR, 0x5a); + status2 = serial_in(up, UART_SCR); + serial_outp(up, UART_SCR, scratch); + + if ((status1 != 0xa5) || (status2 != 0x5a)) + up->port.type = PORT_8250; + } + + up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size; + + if (up->port.type == PORT_UNKNOWN) + goto out; + up->type_probed = up->port.type; /* XXX */ + + /* + * Reset the UART. + */ +#ifdef CONFIG_SERIAL_8250_RSA + if (up->port.type == PORT_RSA) + serial_outp(up, UART_RSA_FRR, 0); +#endif + serial_outp(up, UART_MCR, save_mcr); + serial_outp(up, UART_FCR, (UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | + UART_FCR_CLEAR_XMIT)); + serial_outp(up, UART_FCR, 0); + (void)serial_in(up, UART_RX); + serial_outp(up, UART_IER, 0); + +out: + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static struct uart_driver sunsu_reg = { + .owner = THIS_MODULE, + .driver_name = "sunsu", + .dev_name = "ttyS", + .major = TTY_MAJOR, +}; + +static int sunsu_kbd_ms_init(struct uart_sunsu_port *up) +{ + int quot, baud; +#ifdef CONFIG_SERIO + struct serio *serio; +#endif + + if (up->su_type == SU_PORT_KBD) { + up->cflag = B1200 | CS8 | CLOCAL | CREAD; + baud = 1200; + } else { + up->cflag = B4800 | CS8 | CLOCAL | CREAD; + baud = 4800; + } + quot = up->port.uartclk / (16 * baud); + + sunsu_autoconfig(up); + if (up->port.type == PORT_UNKNOWN) + return -ENODEV; + + printk("%pOF: %s port at %llx, irq %u\n", + up->port.dev->of_node, + (up->su_type == SU_PORT_KBD) ? "Keyboard" : "Mouse", + (unsigned long long) up->port.mapbase, + up->port.irq); + +#ifdef CONFIG_SERIO + serio = &up->serio; + serio->port_data = up; + + serio->id.type = SERIO_RS232; + if (up->su_type == SU_PORT_KBD) { + serio->id.proto = SERIO_SUNKBD; + strlcpy(serio->name, "sukbd", sizeof(serio->name)); + } else { + serio->id.proto = SERIO_SUN; + serio->id.extra = 1; + strlcpy(serio->name, "sums", sizeof(serio->name)); + } + strlcpy(serio->phys, + (!(up->port.line & 1) ? "su/serio0" : "su/serio1"), + sizeof(serio->phys)); + + serio->write = sunsu_serio_write; + serio->open = sunsu_serio_open; + serio->close = sunsu_serio_close; + serio->dev.parent = up->port.dev; + + serio_register_port(serio); +#endif + + sunsu_change_speed(&up->port, up->cflag, 0, quot); + + sunsu_startup(&up->port); + return 0; +} + +/* + * ------------------------------------------------------------ + * Serial console driver + * ------------------------------------------------------------ + */ + +#ifdef CONFIG_SERIAL_SUNSU_CONSOLE + +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +/* + * Wait for transmitter & holding register to empty + */ +static void wait_for_xmitr(struct uart_sunsu_port *up) +{ + unsigned int status, tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + do { + status = serial_in(up, UART_LSR); + + if (status & UART_LSR_BI) + up->lsr_break_flag = UART_LSR_BI; + + if (--tmout == 0) + break; + udelay(1); + } while ((status & BOTH_EMPTY) != BOTH_EMPTY); + + /* Wait up to 1s for flow control if necessary */ + if (up->port.flags & UPF_CONS_FLOW) { + tmout = 1000000; + while (--tmout && + ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0)) + udelay(1); + } +} + +static void sunsu_console_putchar(struct uart_port *port, int ch) +{ + struct uart_sunsu_port *up = + container_of(port, struct uart_sunsu_port, port); + + wait_for_xmitr(up); + serial_out(up, UART_TX, ch); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + */ +static void sunsu_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_sunsu_port *up = &sunsu_ports[co->index]; + unsigned long flags; + unsigned int ier; + int locked = 1; + + if (up->port.sysrq || oops_in_progress) + locked = spin_trylock_irqsave(&up->port.lock, flags); + else + spin_lock_irqsave(&up->port.lock, flags); + + /* + * First save the UER then disable the interrupts + */ + ier = serial_in(up, UART_IER); + serial_out(up, UART_IER, 0); + + uart_console_write(&up->port, s, count, sunsu_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up); + serial_out(up, UART_IER, ier); + + if (locked) + spin_unlock_irqrestore(&up->port.lock, flags); +} + +/* + * Setup initial baud/bits/parity. We do two things here: + * - construct a cflag setting for the first su_open() + * - initialize the serial port + * Return non-zero if we didn't find a serial port. + */ +static int __init sunsu_console_setup(struct console *co, char *options) +{ + static struct ktermios dummy; + struct ktermios termios; + struct uart_port *port; + + printk("Console: ttyS%d (SU)\n", + (sunsu_reg.minor - 64) + co->index); + + if (co->index > nr_inst) + return -ENODEV; + port = &sunsu_ports[co->index].port; + + /* + * Temporary fix. + */ + spin_lock_init(&port->lock); + + /* Get firmware console settings. */ + sunserial_console_termios(co, port->dev->of_node); + + memset(&termios, 0, sizeof(struct ktermios)); + termios.c_cflag = co->cflag; + port->mctrl |= TIOCM_DTR; + port->ops->set_termios(port, &termios, &dummy); + + return 0; +} + +static struct console sunsu_console = { + .name = "ttyS", + .write = sunsu_console_write, + .device = uart_console_device, + .setup = sunsu_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &sunsu_reg, +}; + +/* + * Register console. + */ + +static inline struct console *SUNSU_CONSOLE(void) +{ + return &sunsu_console; +} +#else +#define SUNSU_CONSOLE() (NULL) +#define sunsu_serial_console_init() do { } while (0) +#endif + +static enum su_type su_get_type(struct device_node *dp) +{ + struct device_node *ap = of_find_node_by_path("/aliases"); + enum su_type rc = SU_PORT_PORT; + + if (ap) { + const char *keyb = of_get_property(ap, "keyboard", NULL); + const char *ms = of_get_property(ap, "mouse", NULL); + struct device_node *match; + + if (keyb) { + match = of_find_node_by_path(keyb); + + /* + * The pointer is used as an identifier not + * as a pointer, we can drop the refcount on + * the of__node immediately after getting it. + */ + of_node_put(match); + + if (dp == match) { + rc = SU_PORT_KBD; + goto out; + } + } + if (ms) { + match = of_find_node_by_path(ms); + + of_node_put(match); + + if (dp == match) { + rc = SU_PORT_MS; + goto out; + } + } + } + +out: + of_node_put(ap); + return rc; +} + +static int su_probe(struct platform_device *op) +{ + struct device_node *dp = op->dev.of_node; + struct uart_sunsu_port *up; + struct resource *rp; + enum su_type type; + bool ignore_line; + int err; + + type = su_get_type(dp); + if (type == SU_PORT_PORT) { + if (nr_inst >= UART_NR) + return -EINVAL; + up = &sunsu_ports[nr_inst]; + } else { + up = kzalloc(sizeof(*up), GFP_KERNEL); + if (!up) + return -ENOMEM; + } + + up->port.line = nr_inst; + + spin_lock_init(&up->port.lock); + + up->su_type = type; + + rp = &op->resource[0]; + up->port.mapbase = rp->start; + up->reg_size = resource_size(rp); + up->port.membase = of_ioremap(rp, 0, up->reg_size, "su"); + if (!up->port.membase) { + if (type != SU_PORT_PORT) + kfree(up); + return -ENOMEM; + } + + up->port.irq = op->archdata.irqs[0]; + + up->port.dev = &op->dev; + + up->port.type = PORT_UNKNOWN; + up->port.uartclk = (SU_BASE_BAUD * 16); + up->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_SUNSU_CONSOLE); + + err = 0; + if (up->su_type == SU_PORT_KBD || up->su_type == SU_PORT_MS) { + err = sunsu_kbd_ms_init(up); + if (err) { + of_iounmap(&op->resource[0], + up->port.membase, up->reg_size); + kfree(up); + return err; + } + platform_set_drvdata(op, up); + + nr_inst++; + + return 0; + } + + up->port.flags |= UPF_BOOT_AUTOCONF; + + sunsu_autoconfig(up); + + err = -ENODEV; + if (up->port.type == PORT_UNKNOWN) + goto out_unmap; + + up->port.ops = &sunsu_pops; + + ignore_line = false; + if (of_node_name_eq(dp, "rsc-console") || + of_node_name_eq(dp, "lom-console")) + ignore_line = true; + + sunserial_console_match(SUNSU_CONSOLE(), dp, + &sunsu_reg, up->port.line, + ignore_line); + err = uart_add_one_port(&sunsu_reg, &up->port); + if (err) + goto out_unmap; + + platform_set_drvdata(op, up); + + nr_inst++; + + return 0; + +out_unmap: + of_iounmap(&op->resource[0], up->port.membase, up->reg_size); + kfree(up); + return err; +} + +static int su_remove(struct platform_device *op) +{ + struct uart_sunsu_port *up = platform_get_drvdata(op); + bool kbdms = false; + + if (up->su_type == SU_PORT_MS || + up->su_type == SU_PORT_KBD) + kbdms = true; + + if (kbdms) { +#ifdef CONFIG_SERIO + serio_unregister_port(&up->serio); +#endif + } else if (up->port.type != PORT_UNKNOWN) + uart_remove_one_port(&sunsu_reg, &up->port); + + if (up->port.membase) + of_iounmap(&op->resource[0], up->port.membase, up->reg_size); + + if (kbdms) + kfree(up); + + return 0; +} + +static const struct of_device_id su_match[] = { + { + .name = "su", + }, + { + .name = "su_pnp", + }, + { + .name = "serial", + .compatible = "su", + }, + { + .type = "serial", + .compatible = "su", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, su_match); + +static struct platform_driver su_driver = { + .driver = { + .name = "su", + .of_match_table = su_match, + }, + .probe = su_probe, + .remove = su_remove, +}; + +static int __init sunsu_init(void) +{ + struct device_node *dp; + int err; + int num_uart = 0; + + for_each_node_by_name(dp, "su") { + if (su_get_type(dp) == SU_PORT_PORT) + num_uart++; + } + for_each_node_by_name(dp, "su_pnp") { + if (su_get_type(dp) == SU_PORT_PORT) + num_uart++; + } + for_each_node_by_name(dp, "serial") { + if (of_device_is_compatible(dp, "su")) { + if (su_get_type(dp) == SU_PORT_PORT) + num_uart++; + } + } + for_each_node_by_type(dp, "serial") { + if (of_device_is_compatible(dp, "su")) { + if (su_get_type(dp) == SU_PORT_PORT) + num_uart++; + } + } + + if (num_uart) { + err = sunserial_register_minors(&sunsu_reg, num_uart); + if (err) + return err; + } + + err = platform_driver_register(&su_driver); + if (err && num_uart) + sunserial_unregister_minors(&sunsu_reg, num_uart); + + return err; +} + +static void __exit sunsu_exit(void) +{ + platform_driver_unregister(&su_driver); + if (sunsu_reg.nr) + sunserial_unregister_minors(&sunsu_reg, sunsu_reg.nr); +} + +module_init(sunsu_init); +module_exit(sunsu_exit); + +MODULE_AUTHOR("Eddie C. Dost, Peter Zaitcev, and David S. Miller"); +MODULE_DESCRIPTION("Sun SU serial port driver"); +MODULE_VERSION("2.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c new file mode 100644 index 000000000..001e19d7c --- /dev/null +++ b/drivers/tty/serial/sunzilog.c @@ -0,0 +1,1651 @@ +// SPDX-License-Identifier: GPL-2.0 +/* sunzilog.c: Zilog serial driver for Sparc systems. + * + * Driver for Zilog serial chips found on Sun workstations and + * servers. This driver could actually be made more generic. + * + * This is based on the old drivers/sbus/char/zs.c code. A lot + * of code has been simply moved over directly from there but + * much has been rewritten. Credits therefore go out to Eddie + * C. Dost, Pete Zaitcev, Ted Ts'o and Alex Buell for their + * work there. + * + * Copyright (C) 2002, 2006, 2007 David S. Miller (davem@davemloft.net) + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#ifdef CONFIG_SERIO +#include +#endif +#include +#include + +#include +#include +#include +#include + +#include +#include + +#include "sunzilog.h" + +/* On 32-bit sparcs we need to delay after register accesses + * to accommodate sun4 systems, but we do not need to flush writes. + * On 64-bit sparc we only need to flush single writes to ensure + * completion. + */ +#ifndef CONFIG_SPARC64 +#define ZSDELAY() udelay(5) +#define ZSDELAY_LONG() udelay(20) +#define ZS_WSYNC(channel) do { } while (0) +#else +#define ZSDELAY() +#define ZSDELAY_LONG() +#define ZS_WSYNC(__channel) \ + readb(&((__channel)->control)) +#endif + +#define ZS_CLOCK 4915200 /* Zilog input clock rate. */ +#define ZS_CLOCK_DIVISOR 16 /* Divisor this driver uses. */ + +/* + * We wrap our port structure around the generic uart_port. + */ +struct uart_sunzilog_port { + struct uart_port port; + + /* IRQ servicing chain. */ + struct uart_sunzilog_port *next; + + /* Current values of Zilog write registers. */ + unsigned char curregs[NUM_ZSREGS]; + + unsigned int flags; +#define SUNZILOG_FLAG_CONS_KEYB 0x00000001 +#define SUNZILOG_FLAG_CONS_MOUSE 0x00000002 +#define SUNZILOG_FLAG_IS_CONS 0x00000004 +#define SUNZILOG_FLAG_IS_KGDB 0x00000008 +#define SUNZILOG_FLAG_MODEM_STATUS 0x00000010 +#define SUNZILOG_FLAG_IS_CHANNEL_A 0x00000020 +#define SUNZILOG_FLAG_REGS_HELD 0x00000040 +#define SUNZILOG_FLAG_TX_STOPPED 0x00000080 +#define SUNZILOG_FLAG_TX_ACTIVE 0x00000100 +#define SUNZILOG_FLAG_ESCC 0x00000200 +#define SUNZILOG_FLAG_ISR_HANDLER 0x00000400 + + unsigned int cflag; + + unsigned char parity_mask; + unsigned char prev_status; + +#ifdef CONFIG_SERIO + struct serio serio; + int serio_open; +#endif +}; + +static void sunzilog_putchar(struct uart_port *port, int ch); + +#define ZILOG_CHANNEL_FROM_PORT(PORT) ((struct zilog_channel __iomem *)((PORT)->membase)) +#define UART_ZILOG(PORT) ((struct uart_sunzilog_port *)(PORT)) + +#define ZS_IS_KEYB(UP) ((UP)->flags & SUNZILOG_FLAG_CONS_KEYB) +#define ZS_IS_MOUSE(UP) ((UP)->flags & SUNZILOG_FLAG_CONS_MOUSE) +#define ZS_IS_CONS(UP) ((UP)->flags & SUNZILOG_FLAG_IS_CONS) +#define ZS_IS_KGDB(UP) ((UP)->flags & SUNZILOG_FLAG_IS_KGDB) +#define ZS_WANTS_MODEM_STATUS(UP) ((UP)->flags & SUNZILOG_FLAG_MODEM_STATUS) +#define ZS_IS_CHANNEL_A(UP) ((UP)->flags & SUNZILOG_FLAG_IS_CHANNEL_A) +#define ZS_REGS_HELD(UP) ((UP)->flags & SUNZILOG_FLAG_REGS_HELD) +#define ZS_TX_STOPPED(UP) ((UP)->flags & SUNZILOG_FLAG_TX_STOPPED) +#define ZS_TX_ACTIVE(UP) ((UP)->flags & SUNZILOG_FLAG_TX_ACTIVE) + +/* Reading and writing Zilog8530 registers. The delays are to make this + * driver work on the Sun4 which needs a settling delay after each chip + * register access, other machines handle this in hardware via auxiliary + * flip-flops which implement the settle time we do in software. + * + * The port lock must be held and local IRQs must be disabled + * when {read,write}_zsreg is invoked. + */ +static unsigned char read_zsreg(struct zilog_channel __iomem *channel, + unsigned char reg) +{ + unsigned char retval; + + writeb(reg, &channel->control); + ZSDELAY(); + retval = readb(&channel->control); + ZSDELAY(); + + return retval; +} + +static void write_zsreg(struct zilog_channel __iomem *channel, + unsigned char reg, unsigned char value) +{ + writeb(reg, &channel->control); + ZSDELAY(); + writeb(value, &channel->control); + ZSDELAY(); +} + +static void sunzilog_clear_fifo(struct zilog_channel __iomem *channel) +{ + int i; + + for (i = 0; i < 32; i++) { + unsigned char regval; + + regval = readb(&channel->control); + ZSDELAY(); + if (regval & Rx_CH_AV) + break; + + regval = read_zsreg(channel, R1); + readb(&channel->data); + ZSDELAY(); + + if (regval & (PAR_ERR | Rx_OVR | CRC_ERR)) { + writeb(ERR_RES, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + } + } +} + +/* This function must only be called when the TX is not busy. The UART + * port lock must be held and local interrupts disabled. + */ +static int __load_zsregs(struct zilog_channel __iomem *channel, unsigned char *regs) +{ + int i; + int escc; + unsigned char r15; + + /* Let pending transmits finish. */ + for (i = 0; i < 1000; i++) { + unsigned char stat = read_zsreg(channel, R1); + if (stat & ALL_SNT) + break; + udelay(100); + } + + writeb(ERR_RES, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + + sunzilog_clear_fifo(channel); + + /* Disable all interrupts. */ + write_zsreg(channel, R1, + regs[R1] & ~(RxINT_MASK | TxINT_ENAB | EXT_INT_ENAB)); + + /* Set parity, sync config, stop bits, and clock divisor. */ + write_zsreg(channel, R4, regs[R4]); + + /* Set misc. TX/RX control bits. */ + write_zsreg(channel, R10, regs[R10]); + + /* Set TX/RX controls sans the enable bits. */ + write_zsreg(channel, R3, regs[R3] & ~RxENAB); + write_zsreg(channel, R5, regs[R5] & ~TxENAB); + + /* Synchronous mode config. */ + write_zsreg(channel, R6, regs[R6]); + write_zsreg(channel, R7, regs[R7]); + + /* Don't mess with the interrupt vector (R2, unused by us) and + * master interrupt control (R9). We make sure this is setup + * properly at probe time then never touch it again. + */ + + /* Disable baud generator. */ + write_zsreg(channel, R14, regs[R14] & ~BRENAB); + + /* Clock mode control. */ + write_zsreg(channel, R11, regs[R11]); + + /* Lower and upper byte of baud rate generator divisor. */ + write_zsreg(channel, R12, regs[R12]); + write_zsreg(channel, R13, regs[R13]); + + /* Now rewrite R14, with BRENAB (if set). */ + write_zsreg(channel, R14, regs[R14]); + + /* External status interrupt control. */ + write_zsreg(channel, R15, (regs[R15] | WR7pEN) & ~FIFOEN); + + /* ESCC Extension Register */ + r15 = read_zsreg(channel, R15); + if (r15 & 0x01) { + write_zsreg(channel, R7, regs[R7p]); + + /* External status interrupt and FIFO control. */ + write_zsreg(channel, R15, regs[R15] & ~WR7pEN); + escc = 1; + } else { + /* Clear FIFO bit case it is an issue */ + regs[R15] &= ~FIFOEN; + escc = 0; + } + + /* Reset external status interrupts. */ + write_zsreg(channel, R0, RES_EXT_INT); /* First Latch */ + write_zsreg(channel, R0, RES_EXT_INT); /* Second Latch */ + + /* Rewrite R3/R5, this time without enables masked. */ + write_zsreg(channel, R3, regs[R3]); + write_zsreg(channel, R5, regs[R5]); + + /* Rewrite R1, this time without IRQ enabled masked. */ + write_zsreg(channel, R1, regs[R1]); + + return escc; +} + +/* Reprogram the Zilog channel HW registers with the copies found in the + * software state struct. If the transmitter is busy, we defer this update + * until the next TX complete interrupt. Else, we do it right now. + * + * The UART port lock must be held and local interrupts disabled. + */ +static void sunzilog_maybe_update_regs(struct uart_sunzilog_port *up, + struct zilog_channel __iomem *channel) +{ + if (!ZS_REGS_HELD(up)) { + if (ZS_TX_ACTIVE(up)) { + up->flags |= SUNZILOG_FLAG_REGS_HELD; + } else { + __load_zsregs(channel, up->curregs); + } + } +} + +static void sunzilog_change_mouse_baud(struct uart_sunzilog_port *up) +{ + unsigned int cur_cflag = up->cflag; + int brg, new_baud; + + up->cflag &= ~CBAUD; + up->cflag |= suncore_mouse_baud_cflag_next(cur_cflag, &new_baud); + + brg = BPS_TO_BRG(new_baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); + up->curregs[R12] = (brg & 0xff); + up->curregs[R13] = (brg >> 8) & 0xff; + sunzilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(&up->port)); +} + +static void sunzilog_kbdms_receive_chars(struct uart_sunzilog_port *up, + unsigned char ch, int is_break) +{ + if (ZS_IS_KEYB(up)) { + /* Stop-A is handled by drivers/char/keyboard.c now. */ +#ifdef CONFIG_SERIO + if (up->serio_open) + serio_interrupt(&up->serio, ch, 0); +#endif + } else if (ZS_IS_MOUSE(up)) { + int ret = suncore_mouse_baud_detection(ch, is_break); + + switch (ret) { + case 2: + sunzilog_change_mouse_baud(up); + fallthrough; + case 1: + break; + + case 0: +#ifdef CONFIG_SERIO + if (up->serio_open) + serio_interrupt(&up->serio, ch, 0); +#endif + break; + } + } +} + +static struct tty_port * +sunzilog_receive_chars(struct uart_sunzilog_port *up, + struct zilog_channel __iomem *channel) +{ + struct tty_port *port = NULL; + unsigned char ch, r1, flag; + + if (up->port.state != NULL) /* Unopened serial console */ + port = &up->port.state->port; + + for (;;) { + + r1 = read_zsreg(channel, R1); + if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) { + writeb(ERR_RES, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + } + + ch = readb(&channel->control); + ZSDELAY(); + + /* This funny hack depends upon BRK_ABRT not interfering + * with the other bits we care about in R1. + */ + if (ch & BRK_ABRT) + r1 |= BRK_ABRT; + + if (!(ch & Rx_CH_AV)) + break; + + ch = readb(&channel->data); + ZSDELAY(); + + ch &= up->parity_mask; + + if (unlikely(ZS_IS_KEYB(up)) || unlikely(ZS_IS_MOUSE(up))) { + sunzilog_kbdms_receive_chars(up, ch, 0); + continue; + } + + /* A real serial line, record the character and status. */ + flag = TTY_NORMAL; + up->port.icount.rx++; + if (r1 & (BRK_ABRT | PAR_ERR | Rx_OVR | CRC_ERR)) { + if (r1 & BRK_ABRT) { + r1 &= ~(PAR_ERR | CRC_ERR); + up->port.icount.brk++; + if (uart_handle_break(&up->port)) + continue; + } + else if (r1 & PAR_ERR) + up->port.icount.parity++; + else if (r1 & CRC_ERR) + up->port.icount.frame++; + if (r1 & Rx_OVR) + up->port.icount.overrun++; + r1 &= up->port.read_status_mask; + if (r1 & BRK_ABRT) + flag = TTY_BREAK; + else if (r1 & PAR_ERR) + flag = TTY_PARITY; + else if (r1 & CRC_ERR) + flag = TTY_FRAME; + } + if (uart_handle_sysrq_char(&up->port, ch) || !port) + continue; + + if (up->port.ignore_status_mask == 0xff || + (r1 & up->port.ignore_status_mask) == 0) { + tty_insert_flip_char(port, ch, flag); + } + if (r1 & Rx_OVR) + tty_insert_flip_char(port, 0, TTY_OVERRUN); + } + + return port; +} + +static void sunzilog_status_handle(struct uart_sunzilog_port *up, + struct zilog_channel __iomem *channel) +{ + unsigned char status; + + status = readb(&channel->control); + ZSDELAY(); + + writeb(RES_EXT_INT, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + + if (status & BRK_ABRT) { + if (ZS_IS_MOUSE(up)) + sunzilog_kbdms_receive_chars(up, 0, 1); + if (ZS_IS_CONS(up)) { + /* Wait for BREAK to deassert to avoid potentially + * confusing the PROM. + */ + while (1) { + status = readb(&channel->control); + ZSDELAY(); + if (!(status & BRK_ABRT)) + break; + } + sun_do_break(); + return; + } + } + + if (ZS_WANTS_MODEM_STATUS(up)) { + if (status & SYNC) + up->port.icount.dsr++; + + /* The Zilog just gives us an interrupt when DCD/CTS/etc. change. + * But it does not tell us which bit has changed, we have to keep + * track of this ourselves. + */ + if ((status ^ up->prev_status) ^ DCD) + uart_handle_dcd_change(&up->port, + (status & DCD)); + if ((status ^ up->prev_status) ^ CTS) + uart_handle_cts_change(&up->port, + (status & CTS)); + + wake_up_interruptible(&up->port.state->port.delta_msr_wait); + } + + up->prev_status = status; +} + +static void sunzilog_transmit_chars(struct uart_sunzilog_port *up, + struct zilog_channel __iomem *channel) +{ + struct circ_buf *xmit; + + if (ZS_IS_CONS(up)) { + unsigned char status = readb(&channel->control); + ZSDELAY(); + + /* TX still busy? Just wait for the next TX done interrupt. + * + * It can occur because of how we do serial console writes. It would + * be nice to transmit console writes just like we normally would for + * a TTY line. (ie. buffered and TX interrupt driven). That is not + * easy because console writes cannot sleep. One solution might be + * to poll on enough port->xmit space becoming free. -DaveM + */ + if (!(status & Tx_BUF_EMP)) + return; + } + + up->flags &= ~SUNZILOG_FLAG_TX_ACTIVE; + + if (ZS_REGS_HELD(up)) { + __load_zsregs(channel, up->curregs); + up->flags &= ~SUNZILOG_FLAG_REGS_HELD; + } + + if (ZS_TX_STOPPED(up)) { + up->flags &= ~SUNZILOG_FLAG_TX_STOPPED; + goto ack_tx_int; + } + + if (up->port.x_char) { + up->flags |= SUNZILOG_FLAG_TX_ACTIVE; + writeb(up->port.x_char, &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); + + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + + if (up->port.state == NULL) + goto ack_tx_int; + xmit = &up->port.state->xmit; + if (uart_circ_empty(xmit)) + goto ack_tx_int; + + if (uart_tx_stopped(&up->port)) + goto ack_tx_int; + + up->flags |= SUNZILOG_FLAG_TX_ACTIVE; + writeb(xmit->buf[xmit->tail], &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + return; + +ack_tx_int: + writeb(RES_Tx_P, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); +} + +static irqreturn_t sunzilog_interrupt(int irq, void *dev_id) +{ + struct uart_sunzilog_port *up = dev_id; + + while (up) { + struct zilog_channel __iomem *channel + = ZILOG_CHANNEL_FROM_PORT(&up->port); + struct tty_port *port; + unsigned char r3; + + spin_lock(&up->port.lock); + r3 = read_zsreg(channel, R3); + + /* Channel A */ + port = NULL; + if (r3 & (CHAEXT | CHATxIP | CHARxIP)) { + writeb(RES_H_IUS, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + + if (r3 & CHARxIP) + port = sunzilog_receive_chars(up, channel); + if (r3 & CHAEXT) + sunzilog_status_handle(up, channel); + if (r3 & CHATxIP) + sunzilog_transmit_chars(up, channel); + } + spin_unlock(&up->port.lock); + + if (port) + tty_flip_buffer_push(port); + + /* Channel B */ + up = up->next; + channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + + spin_lock(&up->port.lock); + port = NULL; + if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) { + writeb(RES_H_IUS, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + + if (r3 & CHBRxIP) + port = sunzilog_receive_chars(up, channel); + if (r3 & CHBEXT) + sunzilog_status_handle(up, channel); + if (r3 & CHBTxIP) + sunzilog_transmit_chars(up, channel); + } + spin_unlock(&up->port.lock); + + if (port) + tty_flip_buffer_push(port); + + up = up->next; + } + + return IRQ_HANDLED; +} + +/* A convenient way to quickly get R0 status. The caller must _not_ hold the + * port lock, it is acquired here. + */ +static __inline__ unsigned char sunzilog_read_channel_status(struct uart_port *port) +{ + struct zilog_channel __iomem *channel; + unsigned char status; + + channel = ZILOG_CHANNEL_FROM_PORT(port); + status = readb(&channel->control); + ZSDELAY(); + + return status; +} + +/* The port lock is not held. */ +static unsigned int sunzilog_tx_empty(struct uart_port *port) +{ + unsigned long flags; + unsigned char status; + unsigned int ret; + + spin_lock_irqsave(&port->lock, flags); + + status = sunzilog_read_channel_status(port); + + spin_unlock_irqrestore(&port->lock, flags); + + if (status & Tx_BUF_EMP) + ret = TIOCSER_TEMT; + else + ret = 0; + + return ret; +} + +/* The port lock is held and interrupts are disabled. */ +static unsigned int sunzilog_get_mctrl(struct uart_port *port) +{ + unsigned char status; + unsigned int ret; + + status = sunzilog_read_channel_status(port); + + ret = 0; + if (status & DCD) + ret |= TIOCM_CAR; + if (status & SYNC) + ret |= TIOCM_DSR; + if (status & CTS) + ret |= TIOCM_CTS; + + return ret; +} + +/* The port lock is held and interrupts are disabled. */ +static void sunzilog_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_sunzilog_port *up = + container_of(port, struct uart_sunzilog_port, port); + struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port); + unsigned char set_bits, clear_bits; + + set_bits = clear_bits = 0; + + if (mctrl & TIOCM_RTS) + set_bits |= RTS; + else + clear_bits |= RTS; + if (mctrl & TIOCM_DTR) + set_bits |= DTR; + else + clear_bits |= DTR; + + /* NOTE: Not subject to 'transmitter active' rule. */ + up->curregs[R5] |= set_bits; + up->curregs[R5] &= ~clear_bits; + write_zsreg(channel, R5, up->curregs[R5]); +} + +/* The port lock is held and interrupts are disabled. */ +static void sunzilog_stop_tx(struct uart_port *port) +{ + struct uart_sunzilog_port *up = + container_of(port, struct uart_sunzilog_port, port); + + up->flags |= SUNZILOG_FLAG_TX_STOPPED; +} + +/* The port lock is held and interrupts are disabled. */ +static void sunzilog_start_tx(struct uart_port *port) +{ + struct uart_sunzilog_port *up = + container_of(port, struct uart_sunzilog_port, port); + struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port); + unsigned char status; + + up->flags |= SUNZILOG_FLAG_TX_ACTIVE; + up->flags &= ~SUNZILOG_FLAG_TX_STOPPED; + + status = readb(&channel->control); + ZSDELAY(); + + /* TX busy? Just wait for the TX done interrupt. */ + if (!(status & Tx_BUF_EMP)) + return; + + /* Send the first character to jump-start the TX done + * IRQ sending engine. + */ + if (port->x_char) { + writeb(port->x_char, &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); + + port->icount.tx++; + port->x_char = 0; + } else { + struct circ_buf *xmit = &port->state->xmit; + + if (uart_circ_empty(xmit)) + return; + writeb(xmit->buf[xmit->tail], &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + } +} + +/* The port lock is held. */ +static void sunzilog_stop_rx(struct uart_port *port) +{ + struct uart_sunzilog_port *up = UART_ZILOG(port); + struct zilog_channel __iomem *channel; + + if (ZS_IS_CONS(up)) + return; + + channel = ZILOG_CHANNEL_FROM_PORT(port); + + /* Disable all RX interrupts. */ + up->curregs[R1] &= ~RxINT_MASK; + sunzilog_maybe_update_regs(up, channel); +} + +/* The port lock is held. */ +static void sunzilog_enable_ms(struct uart_port *port) +{ + struct uart_sunzilog_port *up = + container_of(port, struct uart_sunzilog_port, port); + struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port); + unsigned char new_reg; + + new_reg = up->curregs[R15] | (DCDIE | SYNCIE | CTSIE); + if (new_reg != up->curregs[R15]) { + up->curregs[R15] = new_reg; + + /* NOTE: Not subject to 'transmitter active' rule. */ + write_zsreg(channel, R15, up->curregs[R15] & ~WR7pEN); + } +} + +/* The port lock is not held. */ +static void sunzilog_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_sunzilog_port *up = + container_of(port, struct uart_sunzilog_port, port); + struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port); + unsigned char set_bits, clear_bits, new_reg; + unsigned long flags; + + set_bits = clear_bits = 0; + + if (break_state) + set_bits |= SND_BRK; + else + clear_bits |= SND_BRK; + + spin_lock_irqsave(&port->lock, flags); + + new_reg = (up->curregs[R5] | set_bits) & ~clear_bits; + if (new_reg != up->curregs[R5]) { + up->curregs[R5] = new_reg; + + /* NOTE: Not subject to 'transmitter active' rule. */ + write_zsreg(channel, R5, up->curregs[R5]); + } + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void __sunzilog_startup(struct uart_sunzilog_port *up) +{ + struct zilog_channel __iomem *channel; + + channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + up->prev_status = readb(&channel->control); + + /* Enable receiver and transmitter. */ + up->curregs[R3] |= RxENAB; + up->curregs[R5] |= TxENAB; + + up->curregs[R1] |= EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB; + sunzilog_maybe_update_regs(up, channel); +} + +static int sunzilog_startup(struct uart_port *port) +{ + struct uart_sunzilog_port *up = UART_ZILOG(port); + unsigned long flags; + + if (ZS_IS_CONS(up)) + return 0; + + spin_lock_irqsave(&port->lock, flags); + __sunzilog_startup(up); + spin_unlock_irqrestore(&port->lock, flags); + return 0; +} + +/* + * The test for ZS_IS_CONS is explained by the following e-mail: + ***** + * From: Russell King + * Date: Sun, 8 Dec 2002 10:18:38 +0000 + * + * On Sun, Dec 08, 2002 at 02:43:36AM -0500, Pete Zaitcev wrote: + * > I boot my 2.5 boxes using "console=ttyS0,9600" argument, + * > and I noticed that something is not right with reference + * > counting in this case. It seems that when the console + * > is open by kernel initially, this is not accounted + * > as an open, and uart_startup is not called. + * + * That is correct. We are unable to call uart_startup when the serial + * console is initialised because it may need to allocate memory (as + * request_irq does) and the memory allocators may not have been + * initialised. + * + * 1. initialise the port into a state where it can send characters in the + * console write method. + * + * 2. don't do the actual hardware shutdown in your shutdown() method (but + * do the normal software shutdown - ie, free irqs etc) + ***** + */ +static void sunzilog_shutdown(struct uart_port *port) +{ + struct uart_sunzilog_port *up = UART_ZILOG(port); + struct zilog_channel __iomem *channel; + unsigned long flags; + + if (ZS_IS_CONS(up)) + return; + + spin_lock_irqsave(&port->lock, flags); + + channel = ZILOG_CHANNEL_FROM_PORT(port); + + /* Disable receiver and transmitter. */ + up->curregs[R3] &= ~RxENAB; + up->curregs[R5] &= ~TxENAB; + + /* Disable all interrupts and BRK assertion. */ + up->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK); + up->curregs[R5] &= ~SND_BRK; + sunzilog_maybe_update_regs(up, channel); + + spin_unlock_irqrestore(&port->lock, flags); +} + +/* Shared by TTY driver and serial console setup. The port lock is held + * and local interrupts are disabled. + */ +static void +sunzilog_convert_to_zs(struct uart_sunzilog_port *up, unsigned int cflag, + unsigned int iflag, int brg) +{ + + up->curregs[R10] = NRZ; + up->curregs[R11] = TCBR | RCBR; + + /* Program BAUD and clock source. */ + up->curregs[R4] &= ~XCLK_MASK; + up->curregs[R4] |= X16CLK; + up->curregs[R12] = brg & 0xff; + up->curregs[R13] = (brg >> 8) & 0xff; + up->curregs[R14] = BRSRC | BRENAB; + + /* Character size, stop bits, and parity. */ + up->curregs[R3] &= ~RxN_MASK; + up->curregs[R5] &= ~TxN_MASK; + switch (cflag & CSIZE) { + case CS5: + up->curregs[R3] |= Rx5; + up->curregs[R5] |= Tx5; + up->parity_mask = 0x1f; + break; + case CS6: + up->curregs[R3] |= Rx6; + up->curregs[R5] |= Tx6; + up->parity_mask = 0x3f; + break; + case CS7: + up->curregs[R3] |= Rx7; + up->curregs[R5] |= Tx7; + up->parity_mask = 0x7f; + break; + case CS8: + default: + up->curregs[R3] |= Rx8; + up->curregs[R5] |= Tx8; + up->parity_mask = 0xff; + break; + } + up->curregs[R4] &= ~0x0c; + if (cflag & CSTOPB) + up->curregs[R4] |= SB2; + else + up->curregs[R4] |= SB1; + if (cflag & PARENB) + up->curregs[R4] |= PAR_ENAB; + else + up->curregs[R4] &= ~PAR_ENAB; + if (!(cflag & PARODD)) + up->curregs[R4] |= PAR_EVEN; + else + up->curregs[R4] &= ~PAR_EVEN; + + up->port.read_status_mask = Rx_OVR; + if (iflag & INPCK) + up->port.read_status_mask |= CRC_ERR | PAR_ERR; + if (iflag & (IGNBRK | BRKINT | PARMRK)) + up->port.read_status_mask |= BRK_ABRT; + + up->port.ignore_status_mask = 0; + if (iflag & IGNPAR) + up->port.ignore_status_mask |= CRC_ERR | PAR_ERR; + if (iflag & IGNBRK) { + up->port.ignore_status_mask |= BRK_ABRT; + if (iflag & IGNPAR) + up->port.ignore_status_mask |= Rx_OVR; + } + + if ((cflag & CREAD) == 0) + up->port.ignore_status_mask = 0xff; +} + +/* The port lock is not held. */ +static void +sunzilog_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_sunzilog_port *up = + container_of(port, struct uart_sunzilog_port, port); + unsigned long flags; + int baud, brg; + + baud = uart_get_baud_rate(port, termios, old, 1200, 76800); + + spin_lock_irqsave(&up->port.lock, flags); + + brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); + + sunzilog_convert_to_zs(up, termios->c_cflag, termios->c_iflag, brg); + + if (UART_ENABLE_MS(&up->port, termios->c_cflag)) + up->flags |= SUNZILOG_FLAG_MODEM_STATUS; + else + up->flags &= ~SUNZILOG_FLAG_MODEM_STATUS; + + up->cflag = termios->c_cflag; + + sunzilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(port)); + + uart_update_timeout(port, termios->c_cflag, baud); + + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static const char *sunzilog_type(struct uart_port *port) +{ + struct uart_sunzilog_port *up = UART_ZILOG(port); + + return (up->flags & SUNZILOG_FLAG_ESCC) ? "zs (ESCC)" : "zs"; +} + +/* We do not request/release mappings of the registers here, this + * happens at early serial probe time. + */ +static void sunzilog_release_port(struct uart_port *port) +{ +} + +static int sunzilog_request_port(struct uart_port *port) +{ + return 0; +} + +/* These do not need to do anything interesting either. */ +static void sunzilog_config_port(struct uart_port *port, int flags) +{ +} + +/* We do not support letting the user mess with the divisor, IRQ, etc. */ +static int sunzilog_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + return -EINVAL; +} + +#ifdef CONFIG_CONSOLE_POLL +static int sunzilog_get_poll_char(struct uart_port *port) +{ + unsigned char ch, r1; + struct uart_sunzilog_port *up = + container_of(port, struct uart_sunzilog_port, port); + struct zilog_channel __iomem *channel + = ZILOG_CHANNEL_FROM_PORT(&up->port); + + + r1 = read_zsreg(channel, R1); + if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) { + writeb(ERR_RES, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + } + + ch = readb(&channel->control); + ZSDELAY(); + + /* This funny hack depends upon BRK_ABRT not interfering + * with the other bits we care about in R1. + */ + if (ch & BRK_ABRT) + r1 |= BRK_ABRT; + + if (!(ch & Rx_CH_AV)) + return NO_POLL_CHAR; + + ch = readb(&channel->data); + ZSDELAY(); + + ch &= up->parity_mask; + return ch; +} + +static void sunzilog_put_poll_char(struct uart_port *port, + unsigned char ch) +{ + struct uart_sunzilog_port *up = + container_of(port, struct uart_sunzilog_port, port); + + sunzilog_putchar(&up->port, ch); +} +#endif /* CONFIG_CONSOLE_POLL */ + +static const struct uart_ops sunzilog_pops = { + .tx_empty = sunzilog_tx_empty, + .set_mctrl = sunzilog_set_mctrl, + .get_mctrl = sunzilog_get_mctrl, + .stop_tx = sunzilog_stop_tx, + .start_tx = sunzilog_start_tx, + .stop_rx = sunzilog_stop_rx, + .enable_ms = sunzilog_enable_ms, + .break_ctl = sunzilog_break_ctl, + .startup = sunzilog_startup, + .shutdown = sunzilog_shutdown, + .set_termios = sunzilog_set_termios, + .type = sunzilog_type, + .release_port = sunzilog_release_port, + .request_port = sunzilog_request_port, + .config_port = sunzilog_config_port, + .verify_port = sunzilog_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = sunzilog_get_poll_char, + .poll_put_char = sunzilog_put_poll_char, +#endif +}; + +static int uart_chip_count; +static struct uart_sunzilog_port *sunzilog_port_table; +static struct zilog_layout __iomem **sunzilog_chip_regs; + +static struct uart_sunzilog_port *sunzilog_irq_chain; + +static struct uart_driver sunzilog_reg = { + .owner = THIS_MODULE, + .driver_name = "sunzilog", + .dev_name = "ttyS", + .major = TTY_MAJOR, +}; + +static int __init sunzilog_alloc_tables(int num_sunzilog) +{ + struct uart_sunzilog_port *up; + unsigned long size; + int num_channels = num_sunzilog * 2; + int i; + + size = num_channels * sizeof(struct uart_sunzilog_port); + sunzilog_port_table = kzalloc(size, GFP_KERNEL); + if (!sunzilog_port_table) + return -ENOMEM; + + for (i = 0; i < num_channels; i++) { + up = &sunzilog_port_table[i]; + + spin_lock_init(&up->port.lock); + + if (i == 0) + sunzilog_irq_chain = up; + + if (i < num_channels - 1) + up->next = up + 1; + else + up->next = NULL; + } + + size = num_sunzilog * sizeof(struct zilog_layout __iomem *); + sunzilog_chip_regs = kzalloc(size, GFP_KERNEL); + if (!sunzilog_chip_regs) { + kfree(sunzilog_port_table); + sunzilog_irq_chain = NULL; + return -ENOMEM; + } + + return 0; +} + +static void sunzilog_free_tables(void) +{ + kfree(sunzilog_port_table); + sunzilog_irq_chain = NULL; + kfree(sunzilog_chip_regs); +} + +#define ZS_PUT_CHAR_MAX_DELAY 2000 /* 10 ms */ + +static void sunzilog_putchar(struct uart_port *port, int ch) +{ + struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port); + int loops = ZS_PUT_CHAR_MAX_DELAY; + + /* This is a timed polling loop so do not switch the explicit + * udelay with ZSDELAY as that is a NOP on some platforms. -DaveM + */ + do { + unsigned char val = readb(&channel->control); + if (val & Tx_BUF_EMP) { + ZSDELAY(); + break; + } + udelay(5); + } while (--loops); + + writeb(ch, &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); +} + +#ifdef CONFIG_SERIO + +static DEFINE_SPINLOCK(sunzilog_serio_lock); + +static int sunzilog_serio_write(struct serio *serio, unsigned char ch) +{ + struct uart_sunzilog_port *up = serio->port_data; + unsigned long flags; + + spin_lock_irqsave(&sunzilog_serio_lock, flags); + + sunzilog_putchar(&up->port, ch); + + spin_unlock_irqrestore(&sunzilog_serio_lock, flags); + + return 0; +} + +static int sunzilog_serio_open(struct serio *serio) +{ + struct uart_sunzilog_port *up = serio->port_data; + unsigned long flags; + int ret; + + spin_lock_irqsave(&sunzilog_serio_lock, flags); + if (!up->serio_open) { + up->serio_open = 1; + ret = 0; + } else + ret = -EBUSY; + spin_unlock_irqrestore(&sunzilog_serio_lock, flags); + + return ret; +} + +static void sunzilog_serio_close(struct serio *serio) +{ + struct uart_sunzilog_port *up = serio->port_data; + unsigned long flags; + + spin_lock_irqsave(&sunzilog_serio_lock, flags); + up->serio_open = 0; + spin_unlock_irqrestore(&sunzilog_serio_lock, flags); +} + +#endif /* CONFIG_SERIO */ + +#ifdef CONFIG_SERIAL_SUNZILOG_CONSOLE +static void +sunzilog_console_write(struct console *con, const char *s, unsigned int count) +{ + struct uart_sunzilog_port *up = &sunzilog_port_table[con->index]; + unsigned long flags; + int locked = 1; + + if (up->port.sysrq || oops_in_progress) + locked = spin_trylock_irqsave(&up->port.lock, flags); + else + spin_lock_irqsave(&up->port.lock, flags); + + uart_console_write(&up->port, s, count, sunzilog_putchar); + udelay(2); + + if (locked) + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static int __init sunzilog_console_setup(struct console *con, char *options) +{ + struct uart_sunzilog_port *up = &sunzilog_port_table[con->index]; + unsigned long flags; + int baud, brg; + + if (up->port.type != PORT_SUNZILOG) + return -EINVAL; + + printk(KERN_INFO "Console: ttyS%d (SunZilog zs%d)\n", + (sunzilog_reg.minor - 64) + con->index, con->index); + + /* Get firmware console settings. */ + sunserial_console_termios(con, up->port.dev->of_node); + + /* Firmware console speed is limited to 150-->38400 baud so + * this hackish cflag thing is OK. + */ + switch (con->cflag & CBAUD) { + case B150: baud = 150; break; + case B300: baud = 300; break; + case B600: baud = 600; break; + case B1200: baud = 1200; break; + case B2400: baud = 2400; break; + case B4800: baud = 4800; break; + default: case B9600: baud = 9600; break; + case B19200: baud = 19200; break; + case B38400: baud = 38400; break; + } + + brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); + + spin_lock_irqsave(&up->port.lock, flags); + + up->curregs[R15] |= BRKIE; + sunzilog_convert_to_zs(up, con->cflag, 0, brg); + + sunzilog_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS); + __sunzilog_startup(up); + + spin_unlock_irqrestore(&up->port.lock, flags); + + return 0; +} + +static struct console sunzilog_console_ops = { + .name = "ttyS", + .write = sunzilog_console_write, + .device = uart_console_device, + .setup = sunzilog_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &sunzilog_reg, +}; + +static inline struct console *SUNZILOG_CONSOLE(void) +{ + return &sunzilog_console_ops; +} + +#else +#define SUNZILOG_CONSOLE() (NULL) +#endif + +static void sunzilog_init_kbdms(struct uart_sunzilog_port *up) +{ + int baud, brg; + + if (up->flags & SUNZILOG_FLAG_CONS_KEYB) { + up->cflag = B1200 | CS8 | CLOCAL | CREAD; + baud = 1200; + } else { + up->cflag = B4800 | CS8 | CLOCAL | CREAD; + baud = 4800; + } + + up->curregs[R15] |= BRKIE; + brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); + sunzilog_convert_to_zs(up, up->cflag, 0, brg); + sunzilog_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS); + __sunzilog_startup(up); +} + +#ifdef CONFIG_SERIO +static void sunzilog_register_serio(struct uart_sunzilog_port *up) +{ + struct serio *serio = &up->serio; + + serio->port_data = up; + + serio->id.type = SERIO_RS232; + if (up->flags & SUNZILOG_FLAG_CONS_KEYB) { + serio->id.proto = SERIO_SUNKBD; + strlcpy(serio->name, "zskbd", sizeof(serio->name)); + } else { + serio->id.proto = SERIO_SUN; + serio->id.extra = 1; + strlcpy(serio->name, "zsms", sizeof(serio->name)); + } + strlcpy(serio->phys, + ((up->flags & SUNZILOG_FLAG_CONS_KEYB) ? + "zs/serio0" : "zs/serio1"), + sizeof(serio->phys)); + + serio->write = sunzilog_serio_write; + serio->open = sunzilog_serio_open; + serio->close = sunzilog_serio_close; + serio->dev.parent = up->port.dev; + + serio_register_port(serio); +} +#endif + +static void sunzilog_init_hw(struct uart_sunzilog_port *up) +{ + struct zilog_channel __iomem *channel; + unsigned long flags; + int baud, brg; + + channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + + spin_lock_irqsave(&up->port.lock, flags); + if (ZS_IS_CHANNEL_A(up)) { + write_zsreg(channel, R9, FHWRES); + ZSDELAY_LONG(); + (void) read_zsreg(channel, R0); + } + + if (up->flags & (SUNZILOG_FLAG_CONS_KEYB | + SUNZILOG_FLAG_CONS_MOUSE)) { + up->curregs[R1] = EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB; + up->curregs[R4] = PAR_EVEN | X16CLK | SB1; + up->curregs[R3] = RxENAB | Rx8; + up->curregs[R5] = TxENAB | Tx8; + up->curregs[R6] = 0x00; /* SDLC Address */ + up->curregs[R7] = 0x7E; /* SDLC Flag */ + up->curregs[R9] = NV; + up->curregs[R7p] = 0x00; + sunzilog_init_kbdms(up); + /* Only enable interrupts if an ISR handler available */ + if (up->flags & SUNZILOG_FLAG_ISR_HANDLER) + up->curregs[R9] |= MIE; + write_zsreg(channel, R9, up->curregs[R9]); + } else { + /* Normal serial TTY. */ + up->parity_mask = 0xff; + up->curregs[R1] = EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB; + up->curregs[R4] = PAR_EVEN | X16CLK | SB1; + up->curregs[R3] = RxENAB | Rx8; + up->curregs[R5] = TxENAB | Tx8; + up->curregs[R6] = 0x00; /* SDLC Address */ + up->curregs[R7] = 0x7E; /* SDLC Flag */ + up->curregs[R9] = NV; + up->curregs[R10] = NRZ; + up->curregs[R11] = TCBR | RCBR; + baud = 9600; + brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); + up->curregs[R12] = (brg & 0xff); + up->curregs[R13] = (brg >> 8) & 0xff; + up->curregs[R14] = BRSRC | BRENAB; + up->curregs[R15] = FIFOEN; /* Use FIFO if on ESCC */ + up->curregs[R7p] = TxFIFO_LVL | RxFIFO_LVL; + if (__load_zsregs(channel, up->curregs)) { + up->flags |= SUNZILOG_FLAG_ESCC; + } + /* Only enable interrupts if an ISR handler available */ + if (up->flags & SUNZILOG_FLAG_ISR_HANDLER) + up->curregs[R9] |= MIE; + write_zsreg(channel, R9, up->curregs[R9]); + } + + spin_unlock_irqrestore(&up->port.lock, flags); + +#ifdef CONFIG_SERIO + if (up->flags & (SUNZILOG_FLAG_CONS_KEYB | + SUNZILOG_FLAG_CONS_MOUSE)) + sunzilog_register_serio(up); +#endif +} + +static int zilog_irq; + +static int zs_probe(struct platform_device *op) +{ + static int kbm_inst, uart_inst; + int inst; + struct uart_sunzilog_port *up; + struct zilog_layout __iomem *rp; + int keyboard_mouse = 0; + int err; + + if (of_find_property(op->dev.of_node, "keyboard", NULL)) + keyboard_mouse = 1; + + /* uarts must come before keyboards/mice */ + if (keyboard_mouse) + inst = uart_chip_count + kbm_inst; + else + inst = uart_inst; + + sunzilog_chip_regs[inst] = of_ioremap(&op->resource[0], 0, + sizeof(struct zilog_layout), + "zs"); + if (!sunzilog_chip_regs[inst]) + return -ENOMEM; + + rp = sunzilog_chip_regs[inst]; + + if (!zilog_irq) + zilog_irq = op->archdata.irqs[0]; + + up = &sunzilog_port_table[inst * 2]; + + /* Channel A */ + up[0].port.mapbase = op->resource[0].start + 0x00; + up[0].port.membase = (void __iomem *) &rp->channelA; + up[0].port.iotype = UPIO_MEM; + up[0].port.irq = op->archdata.irqs[0]; + up[0].port.uartclk = ZS_CLOCK; + up[0].port.fifosize = 1; + up[0].port.ops = &sunzilog_pops; + up[0].port.type = PORT_SUNZILOG; + up[0].port.flags = 0; + up[0].port.line = (inst * 2) + 0; + up[0].port.dev = &op->dev; + up[0].flags |= SUNZILOG_FLAG_IS_CHANNEL_A; + up[0].port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_SUNZILOG_CONSOLE); + if (keyboard_mouse) + up[0].flags |= SUNZILOG_FLAG_CONS_KEYB; + sunzilog_init_hw(&up[0]); + + /* Channel B */ + up[1].port.mapbase = op->resource[0].start + 0x04; + up[1].port.membase = (void __iomem *) &rp->channelB; + up[1].port.iotype = UPIO_MEM; + up[1].port.irq = op->archdata.irqs[0]; + up[1].port.uartclk = ZS_CLOCK; + up[1].port.fifosize = 1; + up[1].port.ops = &sunzilog_pops; + up[1].port.type = PORT_SUNZILOG; + up[1].port.flags = 0; + up[1].port.line = (inst * 2) + 1; + up[1].port.dev = &op->dev; + up[1].flags |= 0; + up[1].port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_SUNZILOG_CONSOLE); + if (keyboard_mouse) + up[1].flags |= SUNZILOG_FLAG_CONS_MOUSE; + sunzilog_init_hw(&up[1]); + + if (!keyboard_mouse) { + if (sunserial_console_match(SUNZILOG_CONSOLE(), op->dev.of_node, + &sunzilog_reg, up[0].port.line, + false)) + up->flags |= SUNZILOG_FLAG_IS_CONS; + err = uart_add_one_port(&sunzilog_reg, &up[0].port); + if (err) { + of_iounmap(&op->resource[0], + rp, sizeof(struct zilog_layout)); + return err; + } + if (sunserial_console_match(SUNZILOG_CONSOLE(), op->dev.of_node, + &sunzilog_reg, up[1].port.line, + false)) + up->flags |= SUNZILOG_FLAG_IS_CONS; + err = uart_add_one_port(&sunzilog_reg, &up[1].port); + if (err) { + uart_remove_one_port(&sunzilog_reg, &up[0].port); + of_iounmap(&op->resource[0], + rp, sizeof(struct zilog_layout)); + return err; + } + uart_inst++; + } else { + printk(KERN_INFO "%s: Keyboard at MMIO 0x%llx (irq = %d) " + "is a %s\n", + dev_name(&op->dev), + (unsigned long long) up[0].port.mapbase, + op->archdata.irqs[0], sunzilog_type(&up[0].port)); + printk(KERN_INFO "%s: Mouse at MMIO 0x%llx (irq = %d) " + "is a %s\n", + dev_name(&op->dev), + (unsigned long long) up[1].port.mapbase, + op->archdata.irqs[0], sunzilog_type(&up[1].port)); + kbm_inst++; + } + + platform_set_drvdata(op, &up[0]); + + return 0; +} + +static void zs_remove_one(struct uart_sunzilog_port *up) +{ + if (ZS_IS_KEYB(up) || ZS_IS_MOUSE(up)) { +#ifdef CONFIG_SERIO + serio_unregister_port(&up->serio); +#endif + } else + uart_remove_one_port(&sunzilog_reg, &up->port); +} + +static int zs_remove(struct platform_device *op) +{ + struct uart_sunzilog_port *up = platform_get_drvdata(op); + struct zilog_layout __iomem *regs; + + zs_remove_one(&up[0]); + zs_remove_one(&up[1]); + + regs = sunzilog_chip_regs[up[0].port.line / 2]; + of_iounmap(&op->resource[0], regs, sizeof(struct zilog_layout)); + + return 0; +} + +static const struct of_device_id zs_match[] = { + { + .name = "zs", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, zs_match); + +static struct platform_driver zs_driver = { + .driver = { + .name = "zs", + .of_match_table = zs_match, + }, + .probe = zs_probe, + .remove = zs_remove, +}; + +static int __init sunzilog_init(void) +{ + struct device_node *dp; + int err; + int num_keybms = 0; + int num_sunzilog = 0; + + for_each_node_by_name(dp, "zs") { + num_sunzilog++; + if (of_find_property(dp, "keyboard", NULL)) + num_keybms++; + } + + if (num_sunzilog) { + err = sunzilog_alloc_tables(num_sunzilog); + if (err) + goto out; + + uart_chip_count = num_sunzilog - num_keybms; + + err = sunserial_register_minors(&sunzilog_reg, + uart_chip_count * 2); + if (err) + goto out_free_tables; + } + + err = platform_driver_register(&zs_driver); + if (err) + goto out_unregister_uart; + + if (zilog_irq) { + struct uart_sunzilog_port *up = sunzilog_irq_chain; + err = request_irq(zilog_irq, sunzilog_interrupt, IRQF_SHARED, + "zs", sunzilog_irq_chain); + if (err) + goto out_unregister_driver; + + /* Enable Interrupts */ + while (up) { + struct zilog_channel __iomem *channel; + + /* printk (KERN_INFO "Enable IRQ for ZILOG Hardware %p\n", up); */ + channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + up->flags |= SUNZILOG_FLAG_ISR_HANDLER; + up->curregs[R9] |= MIE; + write_zsreg(channel, R9, up->curregs[R9]); + up = up->next; + } + } + +out: + return err; + +out_unregister_driver: + platform_driver_unregister(&zs_driver); + +out_unregister_uart: + if (num_sunzilog) { + sunserial_unregister_minors(&sunzilog_reg, num_sunzilog); + sunzilog_reg.cons = NULL; + } + +out_free_tables: + sunzilog_free_tables(); + goto out; +} + +static void __exit sunzilog_exit(void) +{ + platform_driver_unregister(&zs_driver); + + if (zilog_irq) { + struct uart_sunzilog_port *up = sunzilog_irq_chain; + + /* Disable Interrupts */ + while (up) { + struct zilog_channel __iomem *channel; + + /* printk (KERN_INFO "Disable IRQ for ZILOG Hardware %p\n", up); */ + channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + up->flags &= ~SUNZILOG_FLAG_ISR_HANDLER; + up->curregs[R9] &= ~MIE; + write_zsreg(channel, R9, up->curregs[R9]); + up = up->next; + } + + free_irq(zilog_irq, sunzilog_irq_chain); + zilog_irq = 0; + } + + if (sunzilog_reg.nr) { + sunserial_unregister_minors(&sunzilog_reg, sunzilog_reg.nr); + sunzilog_free_tables(); + } +} + +module_init(sunzilog_init); +module_exit(sunzilog_exit); + +MODULE_AUTHOR("David S. Miller"); +MODULE_DESCRIPTION("Sun Zilog serial port driver"); +MODULE_VERSION("2.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/sunzilog.h b/drivers/tty/serial/sunzilog.h new file mode 100644 index 000000000..6d6764f0a --- /dev/null +++ b/drivers/tty/serial/sunzilog.h @@ -0,0 +1,290 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _SUNZILOG_H +#define _SUNZILOG_H + +struct zilog_channel { + volatile unsigned char control; + volatile unsigned char __pad1; + volatile unsigned char data; + volatile unsigned char __pad2; +}; + +struct zilog_layout { + struct zilog_channel channelB; + struct zilog_channel channelA; +}; + +#define NUM_ZSREGS 17 +#define R7p 16 /* Written as R7 with P15 bit 0 set */ + +/* Conversion routines to/from brg time constants from/to bits + * per second. + */ +#define BRG_TO_BPS(brg, freq) ((freq) / 2 / ((brg) + 2)) +#define BPS_TO_BRG(bps, freq) ((((freq) + (bps)) / (2 * (bps))) - 2) + +/* The Zilog register set */ + +#define FLAG 0x7e + +/* Write Register 0 */ +#define R0 0 /* Register selects */ +#define R1 1 +#define R2 2 +#define R3 3 +#define R4 4 +#define R5 5 +#define R6 6 +#define R7 7 +#define R8 8 +#define R9 9 +#define R10 10 +#define R11 11 +#define R12 12 +#define R13 13 +#define R14 14 +#define R15 15 + +#define NULLCODE 0 /* Null Code */ +#define POINT_HIGH 0x8 /* Select upper half of registers */ +#define RES_EXT_INT 0x10 /* Reset Ext. Status Interrupts */ +#define SEND_ABORT 0x18 /* HDLC Abort */ +#define RES_RxINT_FC 0x20 /* Reset RxINT on First Character */ +#define RES_Tx_P 0x28 /* Reset TxINT Pending */ +#define ERR_RES 0x30 /* Error Reset */ +#define RES_H_IUS 0x38 /* Reset highest IUS */ + +#define RES_Rx_CRC 0x40 /* Reset Rx CRC Checker */ +#define RES_Tx_CRC 0x80 /* Reset Tx CRC Checker */ +#define RES_EOM_L 0xC0 /* Reset EOM latch */ + +/* Write Register 1 */ + +#define EXT_INT_ENAB 0x1 /* Ext Int Enable */ +#define TxINT_ENAB 0x2 /* Tx Int Enable */ +#define PAR_SPEC 0x4 /* Parity is special condition */ + +#define RxINT_DISAB 0 /* Rx Int Disable */ +#define RxINT_FCERR 0x8 /* Rx Int on First Character Only or Error */ +#define INT_ALL_Rx 0x10 /* Int on all Rx Characters or error */ +#define INT_ERR_Rx 0x18 /* Int on error only */ +#define RxINT_MASK 0x18 + +#define WT_RDY_RT 0x20 /* Wait/Ready on R/T */ +#define WT_FN_RDYFN 0x40 /* Wait/FN/Ready FN */ +#define WT_RDY_ENAB 0x80 /* Wait/Ready Enable */ + +/* Write Register #2 (Interrupt Vector) */ + +/* Write Register 3 */ + +#define RxENAB 0x1 /* Rx Enable */ +#define SYNC_L_INH 0x2 /* Sync Character Load Inhibit */ +#define ADD_SM 0x4 /* Address Search Mode (SDLC) */ +#define RxCRC_ENAB 0x8 /* Rx CRC Enable */ +#define ENT_HM 0x10 /* Enter Hunt Mode */ +#define AUTO_ENAB 0x20 /* Auto Enables */ +#define Rx5 0x0 /* Rx 5 Bits/Character */ +#define Rx7 0x40 /* Rx 7 Bits/Character */ +#define Rx6 0x80 /* Rx 6 Bits/Character */ +#define Rx8 0xc0 /* Rx 8 Bits/Character */ +#define RxN_MASK 0xc0 + +/* Write Register 4 */ + +#define PAR_ENAB 0x1 /* Parity Enable */ +#define PAR_EVEN 0x2 /* Parity Even/Odd* */ + +#define SYNC_ENAB 0 /* Sync Modes Enable */ +#define SB1 0x4 /* 1 stop bit/char */ +#define SB15 0x8 /* 1.5 stop bits/char */ +#define SB2 0xc /* 2 stop bits/char */ + +#define MONSYNC 0 /* 8 Bit Sync character */ +#define BISYNC 0x10 /* 16 bit sync character */ +#define SDLC 0x20 /* SDLC Mode (01111110 Sync Flag) */ +#define EXTSYNC 0x30 /* External Sync Mode */ + +#define X1CLK 0x0 /* x1 clock mode */ +#define X16CLK 0x40 /* x16 clock mode */ +#define X32CLK 0x80 /* x32 clock mode */ +#define X64CLK 0xC0 /* x64 clock mode */ +#define XCLK_MASK 0xC0 + +/* Write Register 5 */ + +#define TxCRC_ENAB 0x1 /* Tx CRC Enable */ +#define RTS 0x2 /* RTS */ +#define SDLC_CRC 0x4 /* SDLC/CRC-16 */ +#define TxENAB 0x8 /* Tx Enable */ +#define SND_BRK 0x10 /* Send Break */ +#define Tx5 0x0 /* Tx 5 bits (or less)/character */ +#define Tx7 0x20 /* Tx 7 bits/character */ +#define Tx6 0x40 /* Tx 6 bits/character */ +#define Tx8 0x60 /* Tx 8 bits/character */ +#define TxN_MASK 0x60 +#define DTR 0x80 /* DTR */ + +/* Write Register 6 (Sync bits 0-7/SDLC Address Field) */ + +/* Write Register 7 (Sync bits 8-15/SDLC 01111110) */ + +/* Write Register 7' (ESCC Only) */ +#define AUTO_TxFLAG 1 /* Automatic Tx SDLC Flag */ +#define AUTO_EOM_RST 2 /* Automatic EOM Reset */ +#define AUTOnRTS 4 /* Automatic /RTS pin deactivation */ +#define RxFIFO_LVL 8 /* Receive FIFO interrupt level */ +#define nDTRnREQ 0x10 /* /DTR/REQ timing */ +#define TxFIFO_LVL 0x20 /* Transmit FIFO interrupt level */ +#define EXT_RD_EN 0x40 /* Extended read register enable */ + +/* Write Register 8 (transmit buffer) */ + +/* Write Register 9 (Master interrupt control) */ +#define VIS 1 /* Vector Includes Status */ +#define NV 2 /* No Vector */ +#define DLC 4 /* Disable Lower Chain */ +#define MIE 8 /* Master Interrupt Enable */ +#define STATHI 0x10 /* Status high */ +#define SWIACK 0x20 /* Software Interrupt Ack (not on NMOS) */ +#define NORESET 0 /* No reset on write to R9 */ +#define CHRB 0x40 /* Reset channel B */ +#define CHRA 0x80 /* Reset channel A */ +#define FHWRES 0xc0 /* Force hardware reset */ + +/* Write Register 10 (misc control bits) */ +#define BIT6 1 /* 6 bit/8bit sync */ +#define LOOPMODE 2 /* SDLC Loop mode */ +#define ABUNDER 4 /* Abort/flag on SDLC xmit underrun */ +#define MARKIDLE 8 /* Mark/flag on idle */ +#define GAOP 0x10 /* Go active on poll */ +#define NRZ 0 /* NRZ mode */ +#define NRZI 0x20 /* NRZI mode */ +#define FM1 0x40 /* FM1 (transition = 1) */ +#define FM0 0x60 /* FM0 (transition = 0) */ +#define CRCPS 0x80 /* CRC Preset I/O */ + +/* Write Register 11 (Clock Mode control) */ +#define TRxCXT 0 /* TRxC = Xtal output */ +#define TRxCTC 1 /* TRxC = Transmit clock */ +#define TRxCBR 2 /* TRxC = BR Generator Output */ +#define TRxCDP 3 /* TRxC = DPLL output */ +#define TRxCOI 4 /* TRxC O/I */ +#define TCRTxCP 0 /* Transmit clock = RTxC pin */ +#define TCTRxCP 8 /* Transmit clock = TRxC pin */ +#define TCBR 0x10 /* Transmit clock = BR Generator output */ +#define TCDPLL 0x18 /* Transmit clock = DPLL output */ +#define RCRTxCP 0 /* Receive clock = RTxC pin */ +#define RCTRxCP 0x20 /* Receive clock = TRxC pin */ +#define RCBR 0x40 /* Receive clock = BR Generator output */ +#define RCDPLL 0x60 /* Receive clock = DPLL output */ +#define RTxCX 0x80 /* RTxC Xtal/No Xtal */ + +/* Write Register 12 (lower byte of baud rate generator time constant) */ + +/* Write Register 13 (upper byte of baud rate generator time constant) */ + +/* Write Register 14 (Misc control bits) */ +#define BRENAB 1 /* Baud rate generator enable */ +#define BRSRC 2 /* Baud rate generator source */ +#define DTRREQ 4 /* DTR/Request function */ +#define AUTOECHO 8 /* Auto Echo */ +#define LOOPBAK 0x10 /* Local loopback */ +#define SEARCH 0x20 /* Enter search mode */ +#define RMC 0x40 /* Reset missing clock */ +#define DISDPLL 0x60 /* Disable DPLL */ +#define SSBR 0x80 /* Set DPLL source = BR generator */ +#define SSRTxC 0xa0 /* Set DPLL source = RTxC */ +#define SFMM 0xc0 /* Set FM mode */ +#define SNRZI 0xe0 /* Set NRZI mode */ + +/* Write Register 15 (external/status interrupt control) */ +#define WR7pEN 1 /* WR7' Enable (ESCC only) */ +#define ZCIE 2 /* Zero count IE */ +#define FIFOEN 4 /* FIFO Enable (ESCC only) */ +#define DCDIE 8 /* DCD IE */ +#define SYNCIE 0x10 /* Sync/hunt IE */ +#define CTSIE 0x20 /* CTS IE */ +#define TxUIE 0x40 /* Tx Underrun/EOM IE */ +#define BRKIE 0x80 /* Break/Abort IE */ + + +/* Read Register 0 */ +#define Rx_CH_AV 0x1 /* Rx Character Available */ +#define ZCOUNT 0x2 /* Zero count */ +#define Tx_BUF_EMP 0x4 /* Tx Buffer empty */ +#define DCD 0x8 /* DCD */ +#define SYNC 0x10 /* Sync/hunt */ +#define CTS 0x20 /* CTS */ +#define TxEOM 0x40 /* Tx underrun */ +#define BRK_ABRT 0x80 /* Break/Abort */ + +/* Read Register 1 */ +#define ALL_SNT 0x1 /* All sent */ +/* Residue Data for 8 Rx bits/char programmed */ +#define RES3 0x8 /* 0/3 */ +#define RES4 0x4 /* 0/4 */ +#define RES5 0xc /* 0/5 */ +#define RES6 0x2 /* 0/6 */ +#define RES7 0xa /* 0/7 */ +#define RES8 0x6 /* 0/8 */ +#define RES18 0xe /* 1/8 */ +#define RES28 0x0 /* 2/8 */ +/* Special Rx Condition Interrupts */ +#define PAR_ERR 0x10 /* Parity error */ +#define Rx_OVR 0x20 /* Rx Overrun Error */ +#define CRC_ERR 0x40 /* CRC/Framing Error */ +#define END_FR 0x80 /* End of Frame (SDLC) */ + +/* Read Register 2 (channel b only) - Interrupt vector */ +#define CHB_Tx_EMPTY 0x00 +#define CHB_EXT_STAT 0x02 +#define CHB_Rx_AVAIL 0x04 +#define CHB_SPECIAL 0x06 +#define CHA_Tx_EMPTY 0x08 +#define CHA_EXT_STAT 0x0a +#define CHA_Rx_AVAIL 0x0c +#define CHA_SPECIAL 0x0e +#define STATUS_MASK 0x0e + +/* Read Register 3 (interrupt pending register) ch a only */ +#define CHBEXT 0x1 /* Channel B Ext/Stat IP */ +#define CHBTxIP 0x2 /* Channel B Tx IP */ +#define CHBRxIP 0x4 /* Channel B Rx IP */ +#define CHAEXT 0x8 /* Channel A Ext/Stat IP */ +#define CHATxIP 0x10 /* Channel A Tx IP */ +#define CHARxIP 0x20 /* Channel A Rx IP */ + +/* Read Register 6 (LSB frame byte count [Not on NMOS]) */ + +/* Read Register 7 (MSB frame byte count and FIFO status [Not on NMOS]) */ + +/* Read Register 8 (receive data register) */ + +/* Read Register 10 (misc status bits) */ +#define ONLOOP 2 /* On loop */ +#define LOOPSEND 0x10 /* Loop sending */ +#define CLK2MIS 0x40 /* Two clocks missing */ +#define CLK1MIS 0x80 /* One clock missing */ + +/* Read Register 12 (lower byte of baud rate generator constant) */ + +/* Read Register 13 (upper byte of baud rate generator constant) */ + +/* Read Register 15 (value of WR 15) */ + +/* Misc macros */ +#define ZS_CLEARERR(channel) do { sbus_writeb(ERR_RES, &channel->control); \ + udelay(5); } while(0) + +#define ZS_CLEARSTAT(channel) do { sbus_writeb(RES_EXT_INT, &channel->control); \ + udelay(5); } while(0) + +#define ZS_CLEARFIFO(channel) do { sbus_readb(&channel->data); \ + udelay(2); \ + sbus_readb(&channel->data); \ + udelay(2); \ + sbus_readb(&channel->data); \ + udelay(2); } while(0) + +#endif /* _SUNZILOG_H */ diff --git a/drivers/tty/serial/tegra-tcu.c b/drivers/tty/serial/tegra-tcu.c new file mode 100644 index 000000000..31ae705aa --- /dev/null +++ b/drivers/tty/serial/tegra-tcu.c @@ -0,0 +1,298 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2018, NVIDIA CORPORATION. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define TCU_MBOX_BYTE(i, x) ((x) << (i * 8)) +#define TCU_MBOX_BYTE_V(x, i) (((x) >> (i * 8)) & 0xff) +#define TCU_MBOX_NUM_BYTES(x) ((x) << 24) +#define TCU_MBOX_NUM_BYTES_V(x) (((x) >> 24) & 0x3) + +struct tegra_tcu { + struct uart_driver driver; +#if IS_ENABLED(CONFIG_SERIAL_TEGRA_TCU_CONSOLE) + struct console console; +#endif + struct uart_port port; + + struct mbox_client tx_client, rx_client; + struct mbox_chan *tx, *rx; +}; + +static unsigned int tegra_tcu_uart_tx_empty(struct uart_port *port) +{ + return TIOCSER_TEMT; +} + +static void tegra_tcu_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} + +static unsigned int tegra_tcu_uart_get_mctrl(struct uart_port *port) +{ + return 0; +} + +static void tegra_tcu_uart_stop_tx(struct uart_port *port) +{ +} + +static void tegra_tcu_write_one(struct tegra_tcu *tcu, u32 value, + unsigned int count) +{ + void *msg; + + value |= TCU_MBOX_NUM_BYTES(count); + msg = (void *)(unsigned long)value; + mbox_send_message(tcu->tx, msg); + mbox_flush(tcu->tx, 1000); +} + +static void tegra_tcu_write(struct tegra_tcu *tcu, const char *s, + unsigned int count) +{ + unsigned int written = 0, i = 0; + bool insert_nl = false; + u32 value = 0; + + while (i < count) { + if (insert_nl) { + value |= TCU_MBOX_BYTE(written++, '\n'); + insert_nl = false; + i++; + } else if (s[i] == '\n') { + value |= TCU_MBOX_BYTE(written++, '\r'); + insert_nl = true; + } else { + value |= TCU_MBOX_BYTE(written++, s[i++]); + } + + if (written == 3) { + tegra_tcu_write_one(tcu, value, 3); + value = written = 0; + } + } + + if (written) + tegra_tcu_write_one(tcu, value, written); +} + +static void tegra_tcu_uart_start_tx(struct uart_port *port) +{ + struct tegra_tcu *tcu = port->private_data; + struct circ_buf *xmit = &port->state->xmit; + unsigned long count; + + for (;;) { + count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); + if (!count) + break; + + tegra_tcu_write(tcu, &xmit->buf[xmit->tail], count); + uart_xmit_advance(port, count); + } + + uart_write_wakeup(port); +} + +static void tegra_tcu_uart_stop_rx(struct uart_port *port) +{ +} + +static void tegra_tcu_uart_break_ctl(struct uart_port *port, int ctl) +{ +} + +static int tegra_tcu_uart_startup(struct uart_port *port) +{ + return 0; +} + +static void tegra_tcu_uart_shutdown(struct uart_port *port) +{ +} + +static void tegra_tcu_uart_set_termios(struct uart_port *port, + struct ktermios *new, + struct ktermios *old) +{ +} + +static const struct uart_ops tegra_tcu_uart_ops = { + .tx_empty = tegra_tcu_uart_tx_empty, + .set_mctrl = tegra_tcu_uart_set_mctrl, + .get_mctrl = tegra_tcu_uart_get_mctrl, + .stop_tx = tegra_tcu_uart_stop_tx, + .start_tx = tegra_tcu_uart_start_tx, + .stop_rx = tegra_tcu_uart_stop_rx, + .break_ctl = tegra_tcu_uart_break_ctl, + .startup = tegra_tcu_uart_startup, + .shutdown = tegra_tcu_uart_shutdown, + .set_termios = tegra_tcu_uart_set_termios, +}; + +#if IS_ENABLED(CONFIG_SERIAL_TEGRA_TCU_CONSOLE) +static void tegra_tcu_console_write(struct console *cons, const char *s, + unsigned int count) +{ + struct tegra_tcu *tcu = container_of(cons, struct tegra_tcu, console); + + tegra_tcu_write(tcu, s, count); +} + +static int tegra_tcu_console_setup(struct console *cons, char *options) +{ + return 0; +} +#endif + +static void tegra_tcu_receive(struct mbox_client *cl, void *msg) +{ + struct tegra_tcu *tcu = container_of(cl, struct tegra_tcu, rx_client); + struct tty_port *port = &tcu->port.state->port; + u32 value = (u32)(unsigned long)msg; + unsigned int num_bytes, i; + + num_bytes = TCU_MBOX_NUM_BYTES_V(value); + + for (i = 0; i < num_bytes; i++) + tty_insert_flip_char(port, TCU_MBOX_BYTE_V(value, i), + TTY_NORMAL); + + tty_flip_buffer_push(port); +} + +static int tegra_tcu_probe(struct platform_device *pdev) +{ + struct uart_port *port; + struct tegra_tcu *tcu; + int err; + + tcu = devm_kzalloc(&pdev->dev, sizeof(*tcu), GFP_KERNEL); + if (!tcu) + return -ENOMEM; + + tcu->tx_client.dev = &pdev->dev; + tcu->rx_client.dev = &pdev->dev; + tcu->rx_client.rx_callback = tegra_tcu_receive; + + tcu->tx = mbox_request_channel_byname(&tcu->tx_client, "tx"); + if (IS_ERR(tcu->tx)) { + err = PTR_ERR(tcu->tx); + dev_err(&pdev->dev, "failed to get tx mailbox: %d\n", err); + return err; + } + + tcu->rx = mbox_request_channel_byname(&tcu->rx_client, "rx"); + if (IS_ERR(tcu->rx)) { + err = PTR_ERR(tcu->rx); + dev_err(&pdev->dev, "failed to get rx mailbox: %d\n", err); + goto free_tx; + } + +#if IS_ENABLED(CONFIG_SERIAL_TEGRA_TCU_CONSOLE) + /* setup the console */ + strcpy(tcu->console.name, "ttyTCU"); + tcu->console.device = uart_console_device; + tcu->console.flags = CON_PRINTBUFFER | CON_ANYTIME; + tcu->console.index = -1; + tcu->console.write = tegra_tcu_console_write; + tcu->console.setup = tegra_tcu_console_setup; + tcu->console.data = &tcu->driver; +#endif + + /* setup the driver */ + tcu->driver.owner = THIS_MODULE; + tcu->driver.driver_name = "tegra-tcu"; + tcu->driver.dev_name = "ttyTCU"; +#if IS_ENABLED(CONFIG_SERIAL_TEGRA_TCU_CONSOLE) + tcu->driver.cons = &tcu->console; +#endif + tcu->driver.nr = 1; + + err = uart_register_driver(&tcu->driver); + if (err) { + dev_err(&pdev->dev, "failed to register UART driver: %d\n", + err); + goto free_rx; + } + + /* setup the port */ + port = &tcu->port; + spin_lock_init(&port->lock); + port->dev = &pdev->dev; + port->type = PORT_TEGRA_TCU; + port->ops = &tegra_tcu_uart_ops; + port->fifosize = 1; + port->iotype = UPIO_MEM; + port->flags = UPF_BOOT_AUTOCONF; + port->private_data = tcu; + + err = uart_add_one_port(&tcu->driver, port); + if (err) { + dev_err(&pdev->dev, "failed to add UART port: %d\n", err); + goto unregister_uart; + } + + platform_set_drvdata(pdev, tcu); +#if IS_ENABLED(CONFIG_SERIAL_TEGRA_TCU_CONSOLE) + register_console(&tcu->console); +#endif + + return 0; + +unregister_uart: + uart_unregister_driver(&tcu->driver); +free_rx: + mbox_free_channel(tcu->rx); +free_tx: + mbox_free_channel(tcu->tx); + + return err; +} + +static int tegra_tcu_remove(struct platform_device *pdev) +{ + struct tegra_tcu *tcu = platform_get_drvdata(pdev); + +#if IS_ENABLED(CONFIG_SERIAL_TEGRA_TCU_CONSOLE) + unregister_console(&tcu->console); +#endif + uart_remove_one_port(&tcu->driver, &tcu->port); + uart_unregister_driver(&tcu->driver); + mbox_free_channel(tcu->rx); + mbox_free_channel(tcu->tx); + + return 0; +} + +static const struct of_device_id tegra_tcu_match[] = { + { .compatible = "nvidia,tegra194-tcu" }, + { } +}; + +static struct platform_driver tegra_tcu_driver = { + .driver = { + .name = "tegra-tcu", + .of_match_table = tegra_tcu_match, + }, + .probe = tegra_tcu_probe, + .remove = tegra_tcu_remove, +}; +module_platform_driver(tegra_tcu_driver); + +MODULE_AUTHOR("Mikko Perttunen "); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("NVIDIA Tegra Combined UART driver"); diff --git a/drivers/tty/serial/timbuart.c b/drivers/tty/serial/timbuart.c new file mode 100644 index 000000000..2126e6e6d --- /dev/null +++ b/drivers/tty/serial/timbuart.c @@ -0,0 +1,504 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * timbuart.c timberdale FPGA UART driver + * Copyright (c) 2009 Intel Corporation + */ + +/* Supports: + * Timberdale FPGA UART + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "timbuart.h" + +struct timbuart_port { + struct uart_port port; + struct tasklet_struct tasklet; + int usedma; + u32 last_ier; + struct platform_device *dev; +}; + +static int baudrates[] = {9600, 19200, 38400, 57600, 115200, 230400, 460800, + 921600, 1843200, 3250000}; + +static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier); + +static irqreturn_t timbuart_handleinterrupt(int irq, void *devid); + +static void timbuart_stop_rx(struct uart_port *port) +{ + /* spin lock held by upper layer, disable all RX interrupts */ + u32 ier = ioread32(port->membase + TIMBUART_IER) & ~RXFLAGS; + iowrite32(ier, port->membase + TIMBUART_IER); +} + +static void timbuart_stop_tx(struct uart_port *port) +{ + /* spinlock held by upper layer, disable TX interrupt */ + u32 ier = ioread32(port->membase + TIMBUART_IER) & ~TXBAE; + iowrite32(ier, port->membase + TIMBUART_IER); +} + +static void timbuart_start_tx(struct uart_port *port) +{ + struct timbuart_port *uart = + container_of(port, struct timbuart_port, port); + + /* do not transfer anything here -> fire off the tasklet */ + tasklet_schedule(&uart->tasklet); +} + +static unsigned int timbuart_tx_empty(struct uart_port *port) +{ + u32 isr = ioread32(port->membase + TIMBUART_ISR); + + return (isr & TXBE) ? TIOCSER_TEMT : 0; +} + +static void timbuart_flush_buffer(struct uart_port *port) +{ + if (!timbuart_tx_empty(port)) { + u8 ctl = ioread8(port->membase + TIMBUART_CTRL) | + TIMBUART_CTRL_FLSHTX; + + iowrite8(ctl, port->membase + TIMBUART_CTRL); + iowrite32(TXBF, port->membase + TIMBUART_ISR); + } +} + +static void timbuart_rx_chars(struct uart_port *port) +{ + struct tty_port *tport = &port->state->port; + + while (ioread32(port->membase + TIMBUART_ISR) & RXDP) { + u8 ch = ioread8(port->membase + TIMBUART_RXFIFO); + port->icount.rx++; + tty_insert_flip_char(tport, ch, TTY_NORMAL); + } + + spin_unlock(&port->lock); + tty_flip_buffer_push(tport); + spin_lock(&port->lock); + + dev_dbg(port->dev, "%s - total read %d bytes\n", + __func__, port->icount.rx); +} + +static void timbuart_tx_chars(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + + while (!(ioread32(port->membase + TIMBUART_ISR) & TXBF) && + !uart_circ_empty(xmit)) { + iowrite8(xmit->buf[xmit->tail], + port->membase + TIMBUART_TXFIFO); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + } + + dev_dbg(port->dev, + "%s - total written %d bytes, CTL: %x, RTS: %x, baud: %x\n", + __func__, + port->icount.tx, + ioread8(port->membase + TIMBUART_CTRL), + port->mctrl & TIOCM_RTS, + ioread8(port->membase + TIMBUART_BAUDRATE)); +} + +static void timbuart_handle_tx_port(struct uart_port *port, u32 isr, u32 *ier) +{ + struct timbuart_port *uart = + container_of(port, struct timbuart_port, port); + struct circ_buf *xmit = &port->state->xmit; + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) + return; + + if (port->x_char) + return; + + if (isr & TXFLAGS) { + timbuart_tx_chars(port); + /* clear all TX interrupts */ + iowrite32(TXFLAGS, port->membase + TIMBUART_ISR); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + } else + /* Re-enable any tx interrupt */ + *ier |= uart->last_ier & TXFLAGS; + + /* enable interrupts if there are chars in the transmit buffer, + * Or if we delivered some bytes and want the almost empty interrupt + * we wake up the upper layer later when we got the interrupt + * to give it some time to go out... + */ + if (!uart_circ_empty(xmit)) + *ier |= TXBAE; + + dev_dbg(port->dev, "%s - leaving\n", __func__); +} + +static void timbuart_handle_rx_port(struct uart_port *port, u32 isr, u32 *ier) +{ + if (isr & RXFLAGS) { + /* Some RX status is set */ + if (isr & RXBF) { + u8 ctl = ioread8(port->membase + TIMBUART_CTRL) | + TIMBUART_CTRL_FLSHRX; + iowrite8(ctl, port->membase + TIMBUART_CTRL); + port->icount.overrun++; + } else if (isr & (RXDP)) + timbuart_rx_chars(port); + + /* ack all RX interrupts */ + iowrite32(RXFLAGS, port->membase + TIMBUART_ISR); + } + + /* always have the RX interrupts enabled */ + *ier |= RXBAF | RXBF | RXTT; + + dev_dbg(port->dev, "%s - leaving\n", __func__); +} + +static void timbuart_tasklet(struct tasklet_struct *t) +{ + struct timbuart_port *uart = from_tasklet(uart, t, tasklet); + u32 isr, ier = 0; + + spin_lock(&uart->port.lock); + + isr = ioread32(uart->port.membase + TIMBUART_ISR); + dev_dbg(uart->port.dev, "%s ISR: %x\n", __func__, isr); + + if (!uart->usedma) + timbuart_handle_tx_port(&uart->port, isr, &ier); + + timbuart_mctrl_check(&uart->port, isr, &ier); + + if (!uart->usedma) + timbuart_handle_rx_port(&uart->port, isr, &ier); + + iowrite32(ier, uart->port.membase + TIMBUART_IER); + + spin_unlock(&uart->port.lock); + dev_dbg(uart->port.dev, "%s leaving\n", __func__); +} + +static unsigned int timbuart_get_mctrl(struct uart_port *port) +{ + u8 cts = ioread8(port->membase + TIMBUART_CTRL); + dev_dbg(port->dev, "%s - cts %x\n", __func__, cts); + + if (cts & TIMBUART_CTRL_CTS) + return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; + else + return TIOCM_DSR | TIOCM_CAR; +} + +static void timbuart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + dev_dbg(port->dev, "%s - %x\n", __func__, mctrl); + + if (mctrl & TIOCM_RTS) + iowrite8(TIMBUART_CTRL_RTS, port->membase + TIMBUART_CTRL); + else + iowrite8(0, port->membase + TIMBUART_CTRL); +} + +static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier) +{ + unsigned int cts; + + if (isr & CTS_DELTA) { + /* ack */ + iowrite32(CTS_DELTA, port->membase + TIMBUART_ISR); + cts = timbuart_get_mctrl(port); + uart_handle_cts_change(port, cts & TIOCM_CTS); + wake_up_interruptible(&port->state->port.delta_msr_wait); + } + + *ier |= CTS_DELTA; +} + +static void timbuart_break_ctl(struct uart_port *port, int ctl) +{ + /* N/A */ +} + +static int timbuart_startup(struct uart_port *port) +{ + struct timbuart_port *uart = + container_of(port, struct timbuart_port, port); + + dev_dbg(port->dev, "%s\n", __func__); + + iowrite8(TIMBUART_CTRL_FLSHRX, port->membase + TIMBUART_CTRL); + iowrite32(0x1ff, port->membase + TIMBUART_ISR); + /* Enable all but TX interrupts */ + iowrite32(RXBAF | RXBF | RXTT | CTS_DELTA, + port->membase + TIMBUART_IER); + + return request_irq(port->irq, timbuart_handleinterrupt, IRQF_SHARED, + "timb-uart", uart); +} + +static void timbuart_shutdown(struct uart_port *port) +{ + struct timbuart_port *uart = + container_of(port, struct timbuart_port, port); + dev_dbg(port->dev, "%s\n", __func__); + free_irq(port->irq, uart); + iowrite32(0, port->membase + TIMBUART_IER); + + timbuart_flush_buffer(port); +} + +static int get_bindex(int baud) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(baudrates); i++) + if (baud <= baudrates[i]) + return i; + + return -1; +} + +static void timbuart_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + unsigned int baud; + short bindex; + unsigned long flags; + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); + bindex = get_bindex(baud); + dev_dbg(port->dev, "%s - bindex %d\n", __func__, bindex); + + if (bindex < 0) + bindex = 0; + baud = baudrates[bindex]; + + /* The serial layer calls into this once with old = NULL when setting + up initially */ + if (old) + tty_termios_copy_hw(termios, old); + tty_termios_encode_baud_rate(termios, baud, baud); + + spin_lock_irqsave(&port->lock, flags); + iowrite8((u8)bindex, port->membase + TIMBUART_BAUDRATE); + uart_update_timeout(port, termios->c_cflag, baud); + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *timbuart_type(struct uart_port *port) +{ + return port->type == PORT_UNKNOWN ? "timbuart" : NULL; +} + +/* We do not request/release mappings of the registers here, + * currently it's done in the proble function. + */ +static void timbuart_release_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + int size = + resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0)); + + if (port->flags & UPF_IOREMAP) { + iounmap(port->membase); + port->membase = NULL; + } + + release_mem_region(port->mapbase, size); +} + +static int timbuart_request_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + int size = + resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0)); + + if (!request_mem_region(port->mapbase, size, "timb-uart")) + return -EBUSY; + + if (port->flags & UPF_IOREMAP) { + port->membase = ioremap(port->mapbase, size); + if (port->membase == NULL) { + release_mem_region(port->mapbase, size); + return -ENOMEM; + } + } + + return 0; +} + +static irqreturn_t timbuart_handleinterrupt(int irq, void *devid) +{ + struct timbuart_port *uart = (struct timbuart_port *)devid; + + if (ioread8(uart->port.membase + TIMBUART_IPR)) { + uart->last_ier = ioread32(uart->port.membase + TIMBUART_IER); + + /* disable interrupts, the tasklet enables them again */ + iowrite32(0, uart->port.membase + TIMBUART_IER); + + /* fire off bottom half */ + tasklet_schedule(&uart->tasklet); + + return IRQ_HANDLED; + } else + return IRQ_NONE; +} + +/* + * Configure/autoconfigure the port. + */ +static void timbuart_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_TIMBUART; + timbuart_request_port(port); + } +} + +static int timbuart_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + /* we don't want the core code to modify any port params */ + return -EINVAL; +} + +static const struct uart_ops timbuart_ops = { + .tx_empty = timbuart_tx_empty, + .set_mctrl = timbuart_set_mctrl, + .get_mctrl = timbuart_get_mctrl, + .stop_tx = timbuart_stop_tx, + .start_tx = timbuart_start_tx, + .flush_buffer = timbuart_flush_buffer, + .stop_rx = timbuart_stop_rx, + .break_ctl = timbuart_break_ctl, + .startup = timbuart_startup, + .shutdown = timbuart_shutdown, + .set_termios = timbuart_set_termios, + .type = timbuart_type, + .release_port = timbuart_release_port, + .request_port = timbuart_request_port, + .config_port = timbuart_config_port, + .verify_port = timbuart_verify_port +}; + +static struct uart_driver timbuart_driver = { + .owner = THIS_MODULE, + .driver_name = "timberdale_uart", + .dev_name = "ttyTU", + .major = TIMBUART_MAJOR, + .minor = TIMBUART_MINOR, + .nr = 1 +}; + +static int timbuart_probe(struct platform_device *dev) +{ + int err, irq; + struct timbuart_port *uart; + struct resource *iomem; + + dev_dbg(&dev->dev, "%s\n", __func__); + + uart = kzalloc(sizeof(*uart), GFP_KERNEL); + if (!uart) { + err = -EINVAL; + goto err_mem; + } + + uart->usedma = 0; + + uart->port.uartclk = 3250000 * 16; + uart->port.fifosize = TIMBUART_FIFO_SIZE; + uart->port.regshift = 2; + uart->port.iotype = UPIO_MEM; + uart->port.ops = &timbuart_ops; + uart->port.irq = 0; + uart->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP; + uart->port.line = 0; + uart->port.dev = &dev->dev; + + iomem = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!iomem) { + err = -ENOMEM; + goto err_register; + } + uart->port.mapbase = iomem->start; + uart->port.membase = NULL; + + irq = platform_get_irq(dev, 0); + if (irq < 0) { + err = -EINVAL; + goto err_register; + } + uart->port.irq = irq; + + tasklet_setup(&uart->tasklet, timbuart_tasklet); + + err = uart_register_driver(&timbuart_driver); + if (err) + goto err_register; + + err = uart_add_one_port(&timbuart_driver, &uart->port); + if (err) + goto err_add_port; + + platform_set_drvdata(dev, uart); + + return 0; + +err_add_port: + uart_unregister_driver(&timbuart_driver); +err_register: + kfree(uart); +err_mem: + printk(KERN_ERR "timberdale: Failed to register Timberdale UART: %d\n", + err); + + return err; +} + +static int timbuart_remove(struct platform_device *dev) +{ + struct timbuart_port *uart = platform_get_drvdata(dev); + + tasklet_kill(&uart->tasklet); + uart_remove_one_port(&timbuart_driver, &uart->port); + uart_unregister_driver(&timbuart_driver); + kfree(uart); + + return 0; +} + +static struct platform_driver timbuart_platform_driver = { + .driver = { + .name = "timb-uart", + }, + .probe = timbuart_probe, + .remove = timbuart_remove, +}; + +module_platform_driver(timbuart_platform_driver); + +MODULE_DESCRIPTION("Timberdale UART driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:timb-uart"); + diff --git a/drivers/tty/serial/timbuart.h b/drivers/tty/serial/timbuart.h new file mode 100644 index 000000000..007e59af6 --- /dev/null +++ b/drivers/tty/serial/timbuart.h @@ -0,0 +1,46 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * timbuart.c timberdale FPGA GPIO driver + * Copyright (c) 2009 Intel Corporation + */ + +/* Supports: + * Timberdale FPGA UART + */ + +#ifndef _TIMBUART_H +#define _TIMBUART_H + +#define TIMBUART_FIFO_SIZE 2048 + +#define TIMBUART_RXFIFO 0x08 +#define TIMBUART_TXFIFO 0x0c +#define TIMBUART_IER 0x10 +#define TIMBUART_IPR 0x14 +#define TIMBUART_ISR 0x18 +#define TIMBUART_CTRL 0x1c +#define TIMBUART_BAUDRATE 0x20 + +#define TIMBUART_CTRL_RTS 0x01 +#define TIMBUART_CTRL_CTS 0x02 +#define TIMBUART_CTRL_FLSHTX 0x40 +#define TIMBUART_CTRL_FLSHRX 0x80 + +#define TXBF 0x01 +#define TXBAE 0x02 +#define CTS_DELTA 0x04 +#define RXDP 0x08 +#define RXBAF 0x10 +#define RXBF 0x20 +#define RXTT 0x40 +#define RXBNAE 0x80 +#define TXBE 0x100 + +#define RXFLAGS (RXDP | RXBAF | RXBF | RXTT | RXBNAE) +#define TXFLAGS (TXBF | TXBAE) + +#define TIMBUART_MAJOR 204 +#define TIMBUART_MINOR 192 + +#endif /* _TIMBUART_H */ + diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c new file mode 100644 index 000000000..48923cd8c --- /dev/null +++ b/drivers/tty/serial/uartlite.c @@ -0,0 +1,843 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * uartlite.c: Serial driver for Xilinx uartlite serial controller + * + * Copyright (C) 2006 Peter Korsgaard + * Copyright (C) 2007 Secret Lab Technologies Ltd. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define ULITE_NAME "ttyUL" +#define ULITE_MAJOR 204 +#define ULITE_MINOR 187 +#define ULITE_NR_UARTS CONFIG_SERIAL_UARTLITE_NR_UARTS + +/* --------------------------------------------------------------------- + * Register definitions + * + * For register details see datasheet: + * https://www.xilinx.com/support/documentation/ip_documentation/opb_uartlite.pdf + */ + +#define ULITE_RX 0x00 +#define ULITE_TX 0x04 +#define ULITE_STATUS 0x08 +#define ULITE_CONTROL 0x0c + +#define ULITE_REGION 16 + +#define ULITE_STATUS_RXVALID 0x01 +#define ULITE_STATUS_RXFULL 0x02 +#define ULITE_STATUS_TXEMPTY 0x04 +#define ULITE_STATUS_TXFULL 0x08 +#define ULITE_STATUS_IE 0x10 +#define ULITE_STATUS_OVERRUN 0x20 +#define ULITE_STATUS_FRAME 0x40 +#define ULITE_STATUS_PARITY 0x80 + +#define ULITE_CONTROL_RST_TX 0x01 +#define ULITE_CONTROL_RST_RX 0x02 +#define ULITE_CONTROL_IE 0x10 + +/* Static pointer to console port */ +#ifdef CONFIG_SERIAL_UARTLITE_CONSOLE +static struct uart_port *console_port; +#endif + +struct uartlite_data { + const struct uartlite_reg_ops *reg_ops; + struct clk *clk; +}; + +struct uartlite_reg_ops { + u32 (*in)(void __iomem *addr); + void (*out)(u32 val, void __iomem *addr); +}; + +static u32 uartlite_inbe32(void __iomem *addr) +{ + return ioread32be(addr); +} + +static void uartlite_outbe32(u32 val, void __iomem *addr) +{ + iowrite32be(val, addr); +} + +static const struct uartlite_reg_ops uartlite_be = { + .in = uartlite_inbe32, + .out = uartlite_outbe32, +}; + +static u32 uartlite_inle32(void __iomem *addr) +{ + return ioread32(addr); +} + +static void uartlite_outle32(u32 val, void __iomem *addr) +{ + iowrite32(val, addr); +} + +static const struct uartlite_reg_ops uartlite_le = { + .in = uartlite_inle32, + .out = uartlite_outle32, +}; + +static inline u32 uart_in32(u32 offset, struct uart_port *port) +{ + struct uartlite_data *pdata = port->private_data; + + return pdata->reg_ops->in(port->membase + offset); +} + +static inline void uart_out32(u32 val, u32 offset, struct uart_port *port) +{ + struct uartlite_data *pdata = port->private_data; + + pdata->reg_ops->out(val, port->membase + offset); +} + +static struct uart_port ulite_ports[ULITE_NR_UARTS]; + +/* --------------------------------------------------------------------- + * Core UART driver operations + */ + +static int ulite_receive(struct uart_port *port, int stat) +{ + struct tty_port *tport = &port->state->port; + unsigned char ch = 0; + char flag = TTY_NORMAL; + + if ((stat & (ULITE_STATUS_RXVALID | ULITE_STATUS_OVERRUN + | ULITE_STATUS_FRAME)) == 0) + return 0; + + /* stats */ + if (stat & ULITE_STATUS_RXVALID) { + port->icount.rx++; + ch = uart_in32(ULITE_RX, port); + + if (stat & ULITE_STATUS_PARITY) + port->icount.parity++; + } + + if (stat & ULITE_STATUS_OVERRUN) + port->icount.overrun++; + + if (stat & ULITE_STATUS_FRAME) + port->icount.frame++; + + + /* drop byte with parity error if IGNPAR specificed */ + if (stat & port->ignore_status_mask & ULITE_STATUS_PARITY) + stat &= ~ULITE_STATUS_RXVALID; + + stat &= port->read_status_mask; + + if (stat & ULITE_STATUS_PARITY) + flag = TTY_PARITY; + + + stat &= ~port->ignore_status_mask; + + if (stat & ULITE_STATUS_RXVALID) + tty_insert_flip_char(tport, ch, flag); + + if (stat & ULITE_STATUS_FRAME) + tty_insert_flip_char(tport, 0, TTY_FRAME); + + if (stat & ULITE_STATUS_OVERRUN) + tty_insert_flip_char(tport, 0, TTY_OVERRUN); + + return 1; +} + +static int ulite_transmit(struct uart_port *port, int stat) +{ + struct circ_buf *xmit = &port->state->xmit; + + if (stat & ULITE_STATUS_TXFULL) + return 0; + + if (port->x_char) { + uart_out32(port->x_char, ULITE_TX, port); + port->x_char = 0; + port->icount.tx++; + return 1; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) + return 0; + + uart_out32(xmit->buf[xmit->tail], ULITE_TX, port); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE-1); + port->icount.tx++; + + /* wake up */ + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + return 1; +} + +static irqreturn_t ulite_isr(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + int stat, busy, n = 0; + unsigned long flags; + + do { + spin_lock_irqsave(&port->lock, flags); + stat = uart_in32(ULITE_STATUS, port); + busy = ulite_receive(port, stat); + busy |= ulite_transmit(port, stat); + spin_unlock_irqrestore(&port->lock, flags); + n++; + } while (busy); + + /* work done? */ + if (n > 1) { + tty_flip_buffer_push(&port->state->port); + return IRQ_HANDLED; + } else { + return IRQ_NONE; + } +} + +static unsigned int ulite_tx_empty(struct uart_port *port) +{ + unsigned long flags; + unsigned int ret; + + spin_lock_irqsave(&port->lock, flags); + ret = uart_in32(ULITE_STATUS, port); + spin_unlock_irqrestore(&port->lock, flags); + + return ret & ULITE_STATUS_TXEMPTY ? TIOCSER_TEMT : 0; +} + +static unsigned int ulite_get_mctrl(struct uart_port *port) +{ + return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; +} + +static void ulite_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + /* N/A */ +} + +static void ulite_stop_tx(struct uart_port *port) +{ + /* N/A */ +} + +static void ulite_start_tx(struct uart_port *port) +{ + ulite_transmit(port, uart_in32(ULITE_STATUS, port)); +} + +static void ulite_stop_rx(struct uart_port *port) +{ + /* don't forward any more data (like !CREAD) */ + port->ignore_status_mask = ULITE_STATUS_RXVALID | ULITE_STATUS_PARITY + | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN; +} + +static void ulite_break_ctl(struct uart_port *port, int ctl) +{ + /* N/A */ +} + +static int ulite_startup(struct uart_port *port) +{ + struct uartlite_data *pdata = port->private_data; + int ret; + + ret = clk_enable(pdata->clk); + if (ret) { + dev_err(port->dev, "Failed to enable clock\n"); + return ret; + } + + ret = request_irq(port->irq, ulite_isr, IRQF_SHARED | IRQF_TRIGGER_RISING, + "uartlite", port); + if (ret) + return ret; + + uart_out32(ULITE_CONTROL_RST_RX | ULITE_CONTROL_RST_TX, + ULITE_CONTROL, port); + uart_out32(ULITE_CONTROL_IE, ULITE_CONTROL, port); + + return 0; +} + +static void ulite_shutdown(struct uart_port *port) +{ + struct uartlite_data *pdata = port->private_data; + + uart_out32(0, ULITE_CONTROL, port); + uart_in32(ULITE_CONTROL, port); /* dummy */ + free_irq(port->irq, port); + clk_disable(pdata->clk); +} + +static void ulite_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + unsigned long flags; + unsigned int baud; + + spin_lock_irqsave(&port->lock, flags); + + port->read_status_mask = ULITE_STATUS_RXVALID | ULITE_STATUS_OVERRUN + | ULITE_STATUS_TXFULL; + + if (termios->c_iflag & INPCK) + port->read_status_mask |= + ULITE_STATUS_PARITY | ULITE_STATUS_FRAME; + + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= ULITE_STATUS_PARITY + | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN; + + /* ignore all characters if CREAD is not set */ + if ((termios->c_cflag & CREAD) == 0) + port->ignore_status_mask |= + ULITE_STATUS_RXVALID | ULITE_STATUS_PARITY + | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN; + + /* update timeout */ + baud = uart_get_baud_rate(port, termios, old, 0, 460800); + uart_update_timeout(port, termios->c_cflag, baud); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *ulite_type(struct uart_port *port) +{ + return port->type == PORT_UARTLITE ? "uartlite" : NULL; +} + +static void ulite_release_port(struct uart_port *port) +{ + release_mem_region(port->mapbase, ULITE_REGION); + iounmap(port->membase); + port->membase = NULL; +} + +static int ulite_request_port(struct uart_port *port) +{ + struct uartlite_data *pdata = port->private_data; + int ret; + + pr_debug("ulite console: port=%p; port->mapbase=%llx\n", + port, (unsigned long long) port->mapbase); + + if (!request_mem_region(port->mapbase, ULITE_REGION, "uartlite")) { + dev_err(port->dev, "Memory region busy\n"); + return -EBUSY; + } + + port->membase = ioremap(port->mapbase, ULITE_REGION); + if (!port->membase) { + dev_err(port->dev, "Unable to map registers\n"); + release_mem_region(port->mapbase, ULITE_REGION); + return -EBUSY; + } + + pdata->reg_ops = &uartlite_be; + ret = uart_in32(ULITE_CONTROL, port); + uart_out32(ULITE_CONTROL_RST_TX, ULITE_CONTROL, port); + ret = uart_in32(ULITE_STATUS, port); + /* Endianess detection */ + if ((ret & ULITE_STATUS_TXEMPTY) != ULITE_STATUS_TXEMPTY) + pdata->reg_ops = &uartlite_le; + + return 0; +} + +static void ulite_config_port(struct uart_port *port, int flags) +{ + if (!ulite_request_port(port)) + port->type = PORT_UARTLITE; +} + +static int ulite_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + /* we don't want the core code to modify any port params */ + return -EINVAL; +} + +static void ulite_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct uartlite_data *pdata = port->private_data; + + if (!state) + clk_enable(pdata->clk); + else + clk_disable(pdata->clk); +} + +#ifdef CONFIG_CONSOLE_POLL +static int ulite_get_poll_char(struct uart_port *port) +{ + if (!(uart_in32(ULITE_STATUS, port) & ULITE_STATUS_RXVALID)) + return NO_POLL_CHAR; + + return uart_in32(ULITE_RX, port); +} + +static void ulite_put_poll_char(struct uart_port *port, unsigned char ch) +{ + while (uart_in32(ULITE_STATUS, port) & ULITE_STATUS_TXFULL) + cpu_relax(); + + /* write char to device */ + uart_out32(ch, ULITE_TX, port); +} +#endif + +static const struct uart_ops ulite_ops = { + .tx_empty = ulite_tx_empty, + .set_mctrl = ulite_set_mctrl, + .get_mctrl = ulite_get_mctrl, + .stop_tx = ulite_stop_tx, + .start_tx = ulite_start_tx, + .stop_rx = ulite_stop_rx, + .break_ctl = ulite_break_ctl, + .startup = ulite_startup, + .shutdown = ulite_shutdown, + .set_termios = ulite_set_termios, + .type = ulite_type, + .release_port = ulite_release_port, + .request_port = ulite_request_port, + .config_port = ulite_config_port, + .verify_port = ulite_verify_port, + .pm = ulite_pm, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = ulite_get_poll_char, + .poll_put_char = ulite_put_poll_char, +#endif +}; + +/* --------------------------------------------------------------------- + * Console driver operations + */ + +#ifdef CONFIG_SERIAL_UARTLITE_CONSOLE +static void ulite_console_wait_tx(struct uart_port *port) +{ + u8 val; + unsigned long timeout; + + /* + * Spin waiting for TX fifo to have space available. + * When using the Microblaze Debug Module this can take up to 1s + */ + timeout = jiffies + msecs_to_jiffies(1000); + while (1) { + val = uart_in32(ULITE_STATUS, port); + if ((val & ULITE_STATUS_TXFULL) == 0) + break; + if (time_after(jiffies, timeout)) { + dev_warn(port->dev, + "timeout waiting for TX buffer empty\n"); + break; + } + cpu_relax(); + } +} + +static void ulite_console_putchar(struct uart_port *port, int ch) +{ + ulite_console_wait_tx(port); + uart_out32(ch, ULITE_TX, port); +} + +static void ulite_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_port *port = console_port; + unsigned long flags; + unsigned int ier; + int locked = 1; + + if (oops_in_progress) { + locked = spin_trylock_irqsave(&port->lock, flags); + } else + spin_lock_irqsave(&port->lock, flags); + + /* save and disable interrupt */ + ier = uart_in32(ULITE_STATUS, port) & ULITE_STATUS_IE; + uart_out32(0, ULITE_CONTROL, port); + + uart_console_write(port, s, count, ulite_console_putchar); + + ulite_console_wait_tx(port); + + /* restore interrupt state */ + if (ier) + uart_out32(ULITE_CONTROL_IE, ULITE_CONTROL, port); + + if (locked) + spin_unlock_irqrestore(&port->lock, flags); +} + +static int ulite_console_setup(struct console *co, char *options) +{ + struct uart_port *port = NULL; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index >= 0 && co->index < ULITE_NR_UARTS) + port = ulite_ports + co->index; + + /* Has the device been initialized yet? */ + if (!port || !port->mapbase) { + pr_debug("console on ttyUL%i not present\n", co->index); + return -ENODEV; + } + + console_port = port; + + /* not initialized yet? */ + if (!port->membase) { + if (ulite_request_port(port)) + return -ENODEV; + } + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver ulite_uart_driver; + +static struct console ulite_console = { + .name = ULITE_NAME, + .write = ulite_console_write, + .device = uart_console_device, + .setup = ulite_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, /* Specified on the cmdline (e.g. console=ttyUL0 ) */ + .data = &ulite_uart_driver, +}; + +static void early_uartlite_putc(struct uart_port *port, int c) +{ + /* + * Limit how many times we'll spin waiting for TX FIFO status. + * This will prevent lockups if the base address is incorrectly + * set, or any other issue on the UARTLITE. + * This limit is pretty arbitrary, unless we are at about 10 baud + * we'll never timeout on a working UART. + */ + + unsigned retries = 1000000; + /* read status bit - 0x8 offset */ + while (--retries && (readl(port->membase + 8) & (1 << 3))) + ; + + /* Only attempt the iowrite if we didn't timeout */ + /* write to TX_FIFO - 0x4 offset */ + if (retries) + writel(c & 0xff, port->membase + 4); +} + +static void early_uartlite_write(struct console *console, + const char *s, unsigned n) +{ + struct earlycon_device *device = console->data; + uart_console_write(&device->port, s, n, early_uartlite_putc); +} + +static int __init early_uartlite_setup(struct earlycon_device *device, + const char *options) +{ + if (!device->port.membase) + return -ENODEV; + + device->con->write = early_uartlite_write; + return 0; +} +EARLYCON_DECLARE(uartlite, early_uartlite_setup); +OF_EARLYCON_DECLARE(uartlite_b, "xlnx,opb-uartlite-1.00.b", early_uartlite_setup); +OF_EARLYCON_DECLARE(uartlite_a, "xlnx,xps-uartlite-1.00.a", early_uartlite_setup); + +#endif /* CONFIG_SERIAL_UARTLITE_CONSOLE */ + +static struct uart_driver ulite_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "uartlite", + .dev_name = ULITE_NAME, + .major = ULITE_MAJOR, + .minor = ULITE_MINOR, + .nr = ULITE_NR_UARTS, +#ifdef CONFIG_SERIAL_UARTLITE_CONSOLE + .cons = &ulite_console, +#endif +}; + +/* --------------------------------------------------------------------- + * Port assignment functions (mapping devices to uart_port structures) + */ + +/** ulite_assign: register a uartlite device with the driver + * + * @dev: pointer to device structure + * @id: requested id number. Pass -1 for automatic port assignment + * @base: base address of uartlite registers + * @irq: irq number for uartlite + * @pdata: private data for uartlite + * + * Returns: 0 on success, <0 otherwise + */ +static int ulite_assign(struct device *dev, int id, phys_addr_t base, int irq, + struct uartlite_data *pdata) +{ + struct uart_port *port; + int rc; + + /* if id = -1; then scan for a free id and use that */ + if (id < 0) { + for (id = 0; id < ULITE_NR_UARTS; id++) + if (ulite_ports[id].mapbase == 0) + break; + } + if (id < 0 || id >= ULITE_NR_UARTS) { + dev_err(dev, "%s%i too large\n", ULITE_NAME, id); + return -EINVAL; + } + + if ((ulite_ports[id].mapbase) && (ulite_ports[id].mapbase != base)) { + dev_err(dev, "cannot assign to %s%i; it is already in use\n", + ULITE_NAME, id); + return -EBUSY; + } + + port = &ulite_ports[id]; + + spin_lock_init(&port->lock); + port->fifosize = 16; + port->regshift = 2; + port->iotype = UPIO_MEM; + port->iobase = 1; /* mark port in use */ + port->mapbase = base; + port->membase = NULL; + port->ops = &ulite_ops; + port->irq = irq; + port->flags = UPF_BOOT_AUTOCONF; + port->dev = dev; + port->type = PORT_UNKNOWN; + port->line = id; + port->private_data = pdata; + + dev_set_drvdata(dev, port); + + /* Register the port */ + rc = uart_add_one_port(&ulite_uart_driver, port); + if (rc) { + dev_err(dev, "uart_add_one_port() failed; err=%i\n", rc); + port->mapbase = 0; + dev_set_drvdata(dev, NULL); + return rc; + } + + return 0; +} + +/** ulite_release: register a uartlite device with the driver + * + * @dev: pointer to device structure + */ +static int ulite_release(struct device *dev) +{ + struct uart_port *port = dev_get_drvdata(dev); + int rc = 0; + + if (port) { + rc = uart_remove_one_port(&ulite_uart_driver, port); + dev_set_drvdata(dev, NULL); + port->mapbase = 0; + } + + return rc; +} + +/** + * ulite_suspend - Stop the device. + * + * @dev: handle to the device structure. + * Return: 0 always. + */ +static int __maybe_unused ulite_suspend(struct device *dev) +{ + struct uart_port *port = dev_get_drvdata(dev); + + if (port) + uart_suspend_port(&ulite_uart_driver, port); + + return 0; +} + +/** + * ulite_resume - Resume the device. + * + * @dev: handle to the device structure. + * Return: 0 on success, errno otherwise. + */ +static int __maybe_unused ulite_resume(struct device *dev) +{ + struct uart_port *port = dev_get_drvdata(dev); + + if (port) + uart_resume_port(&ulite_uart_driver, port); + + return 0; +} + +/* --------------------------------------------------------------------- + * Platform bus binding + */ + +static SIMPLE_DEV_PM_OPS(ulite_pm_ops, ulite_suspend, ulite_resume); + +#if defined(CONFIG_OF) +/* Match table for of_platform binding */ +static const struct of_device_id ulite_of_match[] = { + { .compatible = "xlnx,opb-uartlite-1.00.b", }, + { .compatible = "xlnx,xps-uartlite-1.00.a", }, + {} +}; +MODULE_DEVICE_TABLE(of, ulite_of_match); +#endif /* CONFIG_OF */ + +static int ulite_probe(struct platform_device *pdev) +{ + struct resource *res; + struct uartlite_data *pdata; + int irq, ret; + int id = pdev->id; +#ifdef CONFIG_OF + const __be32 *prop; + + prop = of_get_property(pdev->dev.of_node, "port-number", NULL); + if (prop) + id = be32_to_cpup(prop); +#endif + pdata = devm_kzalloc(&pdev->dev, sizeof(struct uartlite_data), + GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + irq = platform_get_irq(pdev, 0); + if (irq <= 0) + return -ENXIO; + + pdata->clk = devm_clk_get(&pdev->dev, "s_axi_aclk"); + if (IS_ERR(pdata->clk)) { + if (PTR_ERR(pdata->clk) != -ENOENT) + return PTR_ERR(pdata->clk); + + /* + * Clock framework support is optional, continue on + * anyways if we don't find a matching clock. + */ + pdata->clk = NULL; + } + + ret = clk_prepare_enable(pdata->clk); + if (ret) { + dev_err(&pdev->dev, "Failed to prepare clock\n"); + return ret; + } + + if (!ulite_uart_driver.state) { + dev_dbg(&pdev->dev, "uartlite: calling uart_register_driver()\n"); + ret = uart_register_driver(&ulite_uart_driver); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to register driver\n"); + return ret; + } + } + + ret = ulite_assign(&pdev->dev, id, res->start, irq, pdata); + + clk_disable(pdata->clk); + + return ret; +} + +static int ulite_remove(struct platform_device *pdev) +{ + struct uart_port *port = dev_get_drvdata(&pdev->dev); + struct uartlite_data *pdata = port->private_data; + + clk_disable_unprepare(pdata->clk); + return ulite_release(&pdev->dev); +} + +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:uartlite"); + +static struct platform_driver ulite_platform_driver = { + .probe = ulite_probe, + .remove = ulite_remove, + .driver = { + .name = "uartlite", + .of_match_table = of_match_ptr(ulite_of_match), + .pm = &ulite_pm_ops, + }, +}; + +/* --------------------------------------------------------------------- + * Module setup/teardown + */ + +static int __init ulite_init(void) +{ + + pr_debug("uartlite: calling platform_driver_register()\n"); + return platform_driver_register(&ulite_platform_driver); +} + +static void __exit ulite_exit(void) +{ + platform_driver_unregister(&ulite_platform_driver); + if (ulite_uart_driver.state) + uart_unregister_driver(&ulite_uart_driver); +} + +module_init(ulite_init); +module_exit(ulite_exit); + +MODULE_AUTHOR("Peter Korsgaard "); +MODULE_DESCRIPTION("Xilinx uartlite serial driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c new file mode 100644 index 000000000..d1fecc883 --- /dev/null +++ b/drivers/tty/serial/ucc_uart.c @@ -0,0 +1,1551 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Freescale QUICC Engine UART device driver + * + * Author: Timur Tabi + * + * Copyright 2007 Freescale Semiconductor, Inc. + * + * This driver adds support for UART devices via Freescale's QUICC Engine + * found on some Freescale SOCs. + * + * If Soft-UART support is needed but not already present, then this driver + * will request and upload the "Soft-UART" microcode upon probe. The + * filename of the microcode should be fsl_qe_ucode_uart_X_YZ.bin, where "X" + * is the name of the SOC (e.g. 8323), and YZ is the revision of the SOC, + * (e.g. "11" for 1.1). + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +#ifdef CONFIG_PPC32 +#include /* mfspr, SPRN_SVR */ +#endif + +/* + * The GUMR flag for Soft UART. This would normally be defined in qe.h, + * but Soft-UART is a hack and we want to keep everything related to it in + * this file. + */ +#define UCC_SLOW_GUMR_H_SUART 0x00004000 /* Soft-UART */ + +/* + * soft_uart is 1 if we need to use Soft-UART mode + */ +static int soft_uart; +/* + * firmware_loaded is 1 if the firmware has been loaded, 0 otherwise. + */ +static int firmware_loaded; + +/* Enable this macro to configure all serial ports in internal loopback + mode */ +/* #define LOOPBACK */ + +/* The major and minor device numbers are defined in + * http://www.lanana.org/docs/device-list/devices-2.6+.txt. For the QE + * UART, we have major number 204 and minor numbers 46 - 49, which are the + * same as for the CPM2. This decision was made because no Freescale part + * has both a CPM and a QE. + */ +#define SERIAL_QE_MAJOR 204 +#define SERIAL_QE_MINOR 46 + +/* Since we only have minor numbers 46 - 49, there is a hard limit of 4 ports */ +#define UCC_MAX_UART 4 + +/* The number of buffer descriptors for receiving characters. */ +#define RX_NUM_FIFO 4 + +/* The number of buffer descriptors for transmitting characters. */ +#define TX_NUM_FIFO 4 + +/* The maximum size of the character buffer for a single RX BD. */ +#define RX_BUF_SIZE 32 + +/* The maximum size of the character buffer for a single TX BD. */ +#define TX_BUF_SIZE 32 + +/* + * The number of jiffies to wait after receiving a close command before the + * device is actually closed. This allows the last few characters to be + * sent over the wire. + */ +#define UCC_WAIT_CLOSING 100 + +struct ucc_uart_pram { + struct ucc_slow_pram common; + u8 res1[8]; /* reserved */ + __be16 maxidl; /* Maximum idle chars */ + __be16 idlc; /* temp idle counter */ + __be16 brkcr; /* Break count register */ + __be16 parec; /* receive parity error counter */ + __be16 frmec; /* receive framing error counter */ + __be16 nosec; /* receive noise counter */ + __be16 brkec; /* receive break condition counter */ + __be16 brkln; /* last received break length */ + __be16 uaddr[2]; /* UART address character 1 & 2 */ + __be16 rtemp; /* Temp storage */ + __be16 toseq; /* Transmit out of sequence char */ + __be16 cchars[8]; /* control characters 1-8 */ + __be16 rccm; /* receive control character mask */ + __be16 rccr; /* receive control character register */ + __be16 rlbc; /* receive last break character */ + __be16 res2; /* reserved */ + __be32 res3; /* reserved, should be cleared */ + u8 res4; /* reserved, should be cleared */ + u8 res5[3]; /* reserved, should be cleared */ + __be32 res6; /* reserved, should be cleared */ + __be32 res7; /* reserved, should be cleared */ + __be32 res8; /* reserved, should be cleared */ + __be32 res9; /* reserved, should be cleared */ + __be32 res10; /* reserved, should be cleared */ + __be32 res11; /* reserved, should be cleared */ + __be32 res12; /* reserved, should be cleared */ + __be32 res13; /* reserved, should be cleared */ +/* The rest is for Soft-UART only */ + __be16 supsmr; /* 0x90, Shadow UPSMR */ + __be16 res92; /* 0x92, reserved, initialize to 0 */ + __be32 rx_state; /* 0x94, RX state, initialize to 0 */ + __be32 rx_cnt; /* 0x98, RX count, initialize to 0 */ + u8 rx_length; /* 0x9C, Char length, set to 1+CL+PEN+1+SL */ + u8 rx_bitmark; /* 0x9D, reserved, initialize to 0 */ + u8 rx_temp_dlst_qe; /* 0x9E, reserved, initialize to 0 */ + u8 res14[0xBC - 0x9F]; /* reserved */ + __be32 dump_ptr; /* 0xBC, Dump pointer */ + __be32 rx_frame_rem; /* 0xC0, reserved, initialize to 0 */ + u8 rx_frame_rem_size; /* 0xC4, reserved, initialize to 0 */ + u8 tx_mode; /* 0xC5, mode, 0=AHDLC, 1=UART */ + __be16 tx_state; /* 0xC6, TX state */ + u8 res15[0xD0 - 0xC8]; /* reserved */ + __be32 resD0; /* 0xD0, reserved, initialize to 0 */ + u8 resD4; /* 0xD4, reserved, initialize to 0 */ + __be16 resD5; /* 0xD5, reserved, initialize to 0 */ +} __attribute__ ((packed)); + +/* SUPSMR definitions, for Soft-UART only */ +#define UCC_UART_SUPSMR_SL 0x8000 +#define UCC_UART_SUPSMR_RPM_MASK 0x6000 +#define UCC_UART_SUPSMR_RPM_ODD 0x0000 +#define UCC_UART_SUPSMR_RPM_LOW 0x2000 +#define UCC_UART_SUPSMR_RPM_EVEN 0x4000 +#define UCC_UART_SUPSMR_RPM_HIGH 0x6000 +#define UCC_UART_SUPSMR_PEN 0x1000 +#define UCC_UART_SUPSMR_TPM_MASK 0x0C00 +#define UCC_UART_SUPSMR_TPM_ODD 0x0000 +#define UCC_UART_SUPSMR_TPM_LOW 0x0400 +#define UCC_UART_SUPSMR_TPM_EVEN 0x0800 +#define UCC_UART_SUPSMR_TPM_HIGH 0x0C00 +#define UCC_UART_SUPSMR_FRZ 0x0100 +#define UCC_UART_SUPSMR_UM_MASK 0x00c0 +#define UCC_UART_SUPSMR_UM_NORMAL 0x0000 +#define UCC_UART_SUPSMR_UM_MAN_MULTI 0x0040 +#define UCC_UART_SUPSMR_UM_AUTO_MULTI 0x00c0 +#define UCC_UART_SUPSMR_CL_MASK 0x0030 +#define UCC_UART_SUPSMR_CL_8 0x0030 +#define UCC_UART_SUPSMR_CL_7 0x0020 +#define UCC_UART_SUPSMR_CL_6 0x0010 +#define UCC_UART_SUPSMR_CL_5 0x0000 + +#define UCC_UART_TX_STATE_AHDLC 0x00 +#define UCC_UART_TX_STATE_UART 0x01 +#define UCC_UART_TX_STATE_X1 0x00 +#define UCC_UART_TX_STATE_X16 0x80 + +#define UCC_UART_PRAM_ALIGNMENT 0x100 + +#define UCC_UART_SIZE_OF_BD UCC_SLOW_SIZE_OF_BD +#define NUM_CONTROL_CHARS 8 + +/* Private per-port data structure */ +struct uart_qe_port { + struct uart_port port; + struct ucc_slow __iomem *uccp; + struct ucc_uart_pram __iomem *uccup; + struct ucc_slow_info us_info; + struct ucc_slow_private *us_private; + struct device_node *np; + unsigned int ucc_num; /* First ucc is 0, not 1 */ + + u16 rx_nrfifos; + u16 rx_fifosize; + u16 tx_nrfifos; + u16 tx_fifosize; + int wait_closing; + u32 flags; + struct qe_bd *rx_bd_base; + struct qe_bd *rx_cur; + struct qe_bd *tx_bd_base; + struct qe_bd *tx_cur; + unsigned char *tx_buf; + unsigned char *rx_buf; + void *bd_virt; /* virtual address of the BD buffers */ + dma_addr_t bd_dma_addr; /* bus address of the BD buffers */ + unsigned int bd_size; /* size of BD buffer space */ +}; + +static struct uart_driver ucc_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "ucc_uart", + .dev_name = "ttyQE", + .major = SERIAL_QE_MAJOR, + .minor = SERIAL_QE_MINOR, + .nr = UCC_MAX_UART, +}; + +/* + * Virtual to physical address translation. + * + * Given the virtual address for a character buffer, this function returns + * the physical (DMA) equivalent. + */ +static inline dma_addr_t cpu2qe_addr(void *addr, struct uart_qe_port *qe_port) +{ + if (likely((addr >= qe_port->bd_virt)) && + (addr < (qe_port->bd_virt + qe_port->bd_size))) + return qe_port->bd_dma_addr + (addr - qe_port->bd_virt); + + /* something nasty happened */ + printk(KERN_ERR "%s: addr=%p\n", __func__, addr); + BUG(); + return 0; +} + +/* + * Physical to virtual address translation. + * + * Given the physical (DMA) address for a character buffer, this function + * returns the virtual equivalent. + */ +static inline void *qe2cpu_addr(dma_addr_t addr, struct uart_qe_port *qe_port) +{ + /* sanity check */ + if (likely((addr >= qe_port->bd_dma_addr) && + (addr < (qe_port->bd_dma_addr + qe_port->bd_size)))) + return qe_port->bd_virt + (addr - qe_port->bd_dma_addr); + + /* something nasty happened */ + printk(KERN_ERR "%s: addr=%llx\n", __func__, (u64)addr); + BUG(); + return NULL; +} + +/* + * Return 1 if the QE is done transmitting all buffers for this port + * + * This function scans each BD in sequence. If we find a BD that is not + * ready (READY=1), then we return 0 indicating that the QE is still sending + * data. If we reach the last BD (WRAP=1), then we know we've scanned + * the entire list, and all BDs are done. + */ +static unsigned int qe_uart_tx_empty(struct uart_port *port) +{ + struct uart_qe_port *qe_port = + container_of(port, struct uart_qe_port, port); + struct qe_bd *bdp = qe_port->tx_bd_base; + + while (1) { + if (qe_ioread16be(&bdp->status) & BD_SC_READY) + /* This BD is not done, so return "not done" */ + return 0; + + if (qe_ioread16be(&bdp->status) & BD_SC_WRAP) + /* + * This BD is done and it's the last one, so return + * "done" + */ + return 1; + + bdp++; + } +} + +/* + * Set the modem control lines + * + * Although the QE can control the modem control lines (e.g. CTS), we + * don't need that support. This function must exist, however, otherwise + * the kernel will panic. + */ +static void qe_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} + +/* + * Get the current modem control line status + * + * Although the QE can control the modem control lines (e.g. CTS), this + * driver currently doesn't support that, so we always return Carrier + * Detect, Data Set Ready, and Clear To Send. + */ +static unsigned int qe_uart_get_mctrl(struct uart_port *port) +{ + return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; +} + +/* + * Disable the transmit interrupt. + * + * Although this function is called "stop_tx", it does not actually stop + * transmission of data. Instead, it tells the QE to not generate an + * interrupt when the UCC is finished sending characters. + */ +static void qe_uart_stop_tx(struct uart_port *port) +{ + struct uart_qe_port *qe_port = + container_of(port, struct uart_qe_port, port); + + qe_clrbits_be16(&qe_port->uccp->uccm, UCC_UART_UCCE_TX); +} + +/* + * Transmit as many characters to the HW as possible. + * + * This function will attempt to stuff of all the characters from the + * kernel's transmit buffer into TX BDs. + * + * A return value of non-zero indicates that it successfully stuffed all + * characters from the kernel buffer. + * + * A return value of zero indicates that there are still characters in the + * kernel's buffer that have not been transmitted, but there are no more BDs + * available. This function should be called again after a BD has been made + * available. + */ +static int qe_uart_tx_pump(struct uart_qe_port *qe_port) +{ + struct qe_bd *bdp; + unsigned char *p; + unsigned int count; + struct uart_port *port = &qe_port->port; + struct circ_buf *xmit = &port->state->xmit; + + /* Handle xon/xoff */ + if (port->x_char) { + /* Pick next descriptor and fill from buffer */ + bdp = qe_port->tx_cur; + + p = qe2cpu_addr(be32_to_cpu(bdp->buf), qe_port); + + *p++ = port->x_char; + qe_iowrite16be(1, &bdp->length); + qe_setbits_be16(&bdp->status, BD_SC_READY); + /* Get next BD. */ + if (qe_ioread16be(&bdp->status) & BD_SC_WRAP) + bdp = qe_port->tx_bd_base; + else + bdp++; + qe_port->tx_cur = bdp; + + port->icount.tx++; + port->x_char = 0; + return 1; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + qe_uart_stop_tx(port); + return 0; + } + + /* Pick next descriptor and fill from buffer */ + bdp = qe_port->tx_cur; + + while (!(qe_ioread16be(&bdp->status) & BD_SC_READY) && + (xmit->tail != xmit->head)) { + count = 0; + p = qe2cpu_addr(be32_to_cpu(bdp->buf), qe_port); + while (count < qe_port->tx_fifosize) { + *p++ = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + count++; + if (xmit->head == xmit->tail) + break; + } + + qe_iowrite16be(count, &bdp->length); + qe_setbits_be16(&bdp->status, BD_SC_READY); + + /* Get next BD. */ + if (qe_ioread16be(&bdp->status) & BD_SC_WRAP) + bdp = qe_port->tx_bd_base; + else + bdp++; + } + qe_port->tx_cur = bdp; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) { + /* The kernel buffer is empty, so turn off TX interrupts. We + don't need to be told when the QE is finished transmitting + the data. */ + qe_uart_stop_tx(port); + return 0; + } + + return 1; +} + +/* + * Start transmitting data + * + * This function will start transmitting any available data, if the port + * isn't already transmitting data. + */ +static void qe_uart_start_tx(struct uart_port *port) +{ + struct uart_qe_port *qe_port = + container_of(port, struct uart_qe_port, port); + + /* If we currently are transmitting, then just return */ + if (qe_ioread16be(&qe_port->uccp->uccm) & UCC_UART_UCCE_TX) + return; + + /* Otherwise, pump the port and start transmission */ + if (qe_uart_tx_pump(qe_port)) + qe_setbits_be16(&qe_port->uccp->uccm, UCC_UART_UCCE_TX); +} + +/* + * Stop transmitting data + */ +static void qe_uart_stop_rx(struct uart_port *port) +{ + struct uart_qe_port *qe_port = + container_of(port, struct uart_qe_port, port); + + qe_clrbits_be16(&qe_port->uccp->uccm, UCC_UART_UCCE_RX); +} + +/* Start or stop sending break signal + * + * This function controls the sending of a break signal. If break_state=1, + * then we start sending a break signal. If break_state=0, then we stop + * sending the break signal. + */ +static void qe_uart_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_qe_port *qe_port = + container_of(port, struct uart_qe_port, port); + + if (break_state) + ucc_slow_stop_tx(qe_port->us_private); + else + ucc_slow_restart_tx(qe_port->us_private); +} + +/* ISR helper function for receiving character. + * + * This function is called by the ISR to handling receiving characters + */ +static void qe_uart_int_rx(struct uart_qe_port *qe_port) +{ + int i; + unsigned char ch, *cp; + struct uart_port *port = &qe_port->port; + struct tty_port *tport = &port->state->port; + struct qe_bd *bdp; + u16 status; + unsigned int flg; + + /* Just loop through the closed BDs and copy the characters into + * the buffer. + */ + bdp = qe_port->rx_cur; + while (1) { + status = qe_ioread16be(&bdp->status); + + /* If this one is empty, then we assume we've read them all */ + if (status & BD_SC_EMPTY) + break; + + /* get number of characters, and check space in RX buffer */ + i = qe_ioread16be(&bdp->length); + + /* If we don't have enough room in RX buffer for the entire BD, + * then we try later, which will be the next RX interrupt. + */ + if (tty_buffer_request_room(tport, i) < i) { + dev_dbg(port->dev, "ucc-uart: no room in RX buffer\n"); + return; + } + + /* get pointer */ + cp = qe2cpu_addr(be32_to_cpu(bdp->buf), qe_port); + + /* loop through the buffer */ + while (i-- > 0) { + ch = *cp++; + port->icount.rx++; + flg = TTY_NORMAL; + + if (!i && status & + (BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV)) + goto handle_error; + if (uart_handle_sysrq_char(port, ch)) + continue; + +error_return: + tty_insert_flip_char(tport, ch, flg); + + } + + /* This BD is ready to be used again. Clear status. get next */ + qe_clrsetbits_be16(&bdp->status, + BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV | BD_SC_ID, + BD_SC_EMPTY); + if (qe_ioread16be(&bdp->status) & BD_SC_WRAP) + bdp = qe_port->rx_bd_base; + else + bdp++; + + } + + /* Write back buffer pointer */ + qe_port->rx_cur = bdp; + + /* Activate BH processing */ + tty_flip_buffer_push(tport); + + return; + + /* Error processing */ + +handle_error: + /* Statistics */ + if (status & BD_SC_BR) + port->icount.brk++; + if (status & BD_SC_PR) + port->icount.parity++; + if (status & BD_SC_FR) + port->icount.frame++; + if (status & BD_SC_OV) + port->icount.overrun++; + + /* Mask out ignored conditions */ + status &= port->read_status_mask; + + /* Handle the remaining ones */ + if (status & BD_SC_BR) + flg = TTY_BREAK; + else if (status & BD_SC_PR) + flg = TTY_PARITY; + else if (status & BD_SC_FR) + flg = TTY_FRAME; + + /* Overrun does not affect the current character ! */ + if (status & BD_SC_OV) + tty_insert_flip_char(tport, 0, TTY_OVERRUN); + port->sysrq = 0; + goto error_return; +} + +/* Interrupt handler + * + * This interrupt handler is called after a BD is processed. + */ +static irqreturn_t qe_uart_int(int irq, void *data) +{ + struct uart_qe_port *qe_port = (struct uart_qe_port *) data; + struct ucc_slow __iomem *uccp = qe_port->uccp; + u16 events; + + /* Clear the interrupts */ + events = qe_ioread16be(&uccp->ucce); + qe_iowrite16be(events, &uccp->ucce); + + if (events & UCC_UART_UCCE_BRKE) + uart_handle_break(&qe_port->port); + + if (events & UCC_UART_UCCE_RX) + qe_uart_int_rx(qe_port); + + if (events & UCC_UART_UCCE_TX) + qe_uart_tx_pump(qe_port); + + return events ? IRQ_HANDLED : IRQ_NONE; +} + +/* Initialize buffer descriptors + * + * This function initializes all of the RX and TX buffer descriptors. + */ +static void qe_uart_initbd(struct uart_qe_port *qe_port) +{ + int i; + void *bd_virt; + struct qe_bd *bdp; + + /* Set the physical address of the host memory buffers in the buffer + * descriptors, and the virtual address for us to work with. + */ + bd_virt = qe_port->bd_virt; + bdp = qe_port->rx_bd_base; + qe_port->rx_cur = qe_port->rx_bd_base; + for (i = 0; i < (qe_port->rx_nrfifos - 1); i++) { + qe_iowrite16be(BD_SC_EMPTY | BD_SC_INTRPT, &bdp->status); + qe_iowrite32be(cpu2qe_addr(bd_virt, qe_port), &bdp->buf); + qe_iowrite16be(0, &bdp->length); + bd_virt += qe_port->rx_fifosize; + bdp++; + } + + /* */ + qe_iowrite16be(BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT, &bdp->status); + qe_iowrite32be(cpu2qe_addr(bd_virt, qe_port), &bdp->buf); + qe_iowrite16be(0, &bdp->length); + + /* Set the physical address of the host memory + * buffers in the buffer descriptors, and the + * virtual address for us to work with. + */ + bd_virt = qe_port->bd_virt + + L1_CACHE_ALIGN(qe_port->rx_nrfifos * qe_port->rx_fifosize); + qe_port->tx_cur = qe_port->tx_bd_base; + bdp = qe_port->tx_bd_base; + for (i = 0; i < (qe_port->tx_nrfifos - 1); i++) { + qe_iowrite16be(BD_SC_INTRPT, &bdp->status); + qe_iowrite32be(cpu2qe_addr(bd_virt, qe_port), &bdp->buf); + qe_iowrite16be(0, &bdp->length); + bd_virt += qe_port->tx_fifosize; + bdp++; + } + + /* Loopback requires the preamble bit to be set on the first TX BD */ +#ifdef LOOPBACK + qe_setbits_be16(&qe_port->tx_cur->status, BD_SC_P); +#endif + + qe_iowrite16be(BD_SC_WRAP | BD_SC_INTRPT, &bdp->status); + qe_iowrite32be(cpu2qe_addr(bd_virt, qe_port), &bdp->buf); + qe_iowrite16be(0, &bdp->length); +} + +/* + * Initialize a UCC for UART. + * + * This function configures a given UCC to be used as a UART device. Basic + * UCC initialization is handled in qe_uart_request_port(). This function + * does all the UART-specific stuff. + */ +static void qe_uart_init_ucc(struct uart_qe_port *qe_port) +{ + u32 cecr_subblock; + struct ucc_slow __iomem *uccp = qe_port->uccp; + struct ucc_uart_pram *uccup = qe_port->uccup; + + unsigned int i; + + /* First, disable TX and RX in the UCC */ + ucc_slow_disable(qe_port->us_private, COMM_DIR_RX_AND_TX); + + /* Program the UCC UART parameter RAM */ + qe_iowrite8(UCC_BMR_GBL | UCC_BMR_BO_BE, &uccup->common.rbmr); + qe_iowrite8(UCC_BMR_GBL | UCC_BMR_BO_BE, &uccup->common.tbmr); + qe_iowrite16be(qe_port->rx_fifosize, &uccup->common.mrblr); + qe_iowrite16be(0x10, &uccup->maxidl); + qe_iowrite16be(1, &uccup->brkcr); + qe_iowrite16be(0, &uccup->parec); + qe_iowrite16be(0, &uccup->frmec); + qe_iowrite16be(0, &uccup->nosec); + qe_iowrite16be(0, &uccup->brkec); + qe_iowrite16be(0, &uccup->uaddr[0]); + qe_iowrite16be(0, &uccup->uaddr[1]); + qe_iowrite16be(0, &uccup->toseq); + for (i = 0; i < 8; i++) + qe_iowrite16be(0xC000, &uccup->cchars[i]); + qe_iowrite16be(0xc0ff, &uccup->rccm); + + /* Configure the GUMR registers for UART */ + if (soft_uart) { + /* Soft-UART requires a 1X multiplier for TX */ + qe_clrsetbits_be32(&uccp->gumr_l, + UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK | UCC_SLOW_GUMR_L_RDCR_MASK, + UCC_SLOW_GUMR_L_MODE_UART | UCC_SLOW_GUMR_L_TDCR_1 | UCC_SLOW_GUMR_L_RDCR_16); + + qe_clrsetbits_be32(&uccp->gumr_h, UCC_SLOW_GUMR_H_RFW, + UCC_SLOW_GUMR_H_TRX | UCC_SLOW_GUMR_H_TTX); + } else { + qe_clrsetbits_be32(&uccp->gumr_l, + UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK | UCC_SLOW_GUMR_L_RDCR_MASK, + UCC_SLOW_GUMR_L_MODE_UART | UCC_SLOW_GUMR_L_TDCR_16 | UCC_SLOW_GUMR_L_RDCR_16); + + qe_clrsetbits_be32(&uccp->gumr_h, + UCC_SLOW_GUMR_H_TRX | UCC_SLOW_GUMR_H_TTX, + UCC_SLOW_GUMR_H_RFW); + } + +#ifdef LOOPBACK + qe_clrsetbits_be32(&uccp->gumr_l, UCC_SLOW_GUMR_L_DIAG_MASK, + UCC_SLOW_GUMR_L_DIAG_LOOP); + qe_clrsetbits_be32(&uccp->gumr_h, + UCC_SLOW_GUMR_H_CTSP | UCC_SLOW_GUMR_H_RSYN, + UCC_SLOW_GUMR_H_CDS); +#endif + + /* Disable rx interrupts and clear all pending events. */ + qe_iowrite16be(0, &uccp->uccm); + qe_iowrite16be(0xffff, &uccp->ucce); + qe_iowrite16be(0x7e7e, &uccp->udsr); + + /* Initialize UPSMR */ + qe_iowrite16be(0, &uccp->upsmr); + + if (soft_uart) { + qe_iowrite16be(0x30, &uccup->supsmr); + qe_iowrite16be(0, &uccup->res92); + qe_iowrite32be(0, &uccup->rx_state); + qe_iowrite32be(0, &uccup->rx_cnt); + qe_iowrite8(0, &uccup->rx_bitmark); + qe_iowrite8(10, &uccup->rx_length); + qe_iowrite32be(0x4000, &uccup->dump_ptr); + qe_iowrite8(0, &uccup->rx_temp_dlst_qe); + qe_iowrite32be(0, &uccup->rx_frame_rem); + qe_iowrite8(0, &uccup->rx_frame_rem_size); + /* Soft-UART requires TX to be 1X */ + qe_iowrite8(UCC_UART_TX_STATE_UART | UCC_UART_TX_STATE_X1, + &uccup->tx_mode); + qe_iowrite16be(0, &uccup->tx_state); + qe_iowrite8(0, &uccup->resD4); + qe_iowrite16be(0, &uccup->resD5); + + /* Set UART mode. + * Enable receive and transmit. + */ + + /* From the microcode errata: + * 1.GUMR_L register, set mode=0010 (QMC). + * 2.Set GUMR_H[17] bit. (UART/AHDLC mode). + * 3.Set GUMR_H[19:20] (Transparent mode) + * 4.Clear GUMR_H[26] (RFW) + * ... + * 6.Receiver must use 16x over sampling + */ + qe_clrsetbits_be32(&uccp->gumr_l, + UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK | UCC_SLOW_GUMR_L_RDCR_MASK, + UCC_SLOW_GUMR_L_MODE_QMC | UCC_SLOW_GUMR_L_TDCR_16 | UCC_SLOW_GUMR_L_RDCR_16); + + qe_clrsetbits_be32(&uccp->gumr_h, + UCC_SLOW_GUMR_H_RFW | UCC_SLOW_GUMR_H_RSYN, + UCC_SLOW_GUMR_H_SUART | UCC_SLOW_GUMR_H_TRX | UCC_SLOW_GUMR_H_TTX | UCC_SLOW_GUMR_H_TFL); + +#ifdef LOOPBACK + qe_clrsetbits_be32(&uccp->gumr_l, UCC_SLOW_GUMR_L_DIAG_MASK, + UCC_SLOW_GUMR_L_DIAG_LOOP); + qe_clrbits_be32(&uccp->gumr_h, + UCC_SLOW_GUMR_H_CTSP | UCC_SLOW_GUMR_H_CDS); +#endif + + cecr_subblock = ucc_slow_get_qe_cr_subblock(qe_port->ucc_num); + qe_issue_cmd(QE_INIT_TX_RX, cecr_subblock, + QE_CR_PROTOCOL_UNSPECIFIED, 0); + } else { + cecr_subblock = ucc_slow_get_qe_cr_subblock(qe_port->ucc_num); + qe_issue_cmd(QE_INIT_TX_RX, cecr_subblock, + QE_CR_PROTOCOL_UART, 0); + } +} + +/* + * Initialize the port. + */ +static int qe_uart_startup(struct uart_port *port) +{ + struct uart_qe_port *qe_port = + container_of(port, struct uart_qe_port, port); + int ret; + + /* + * If we're using Soft-UART mode, then we need to make sure the + * firmware has been uploaded first. + */ + if (soft_uart && !firmware_loaded) { + dev_err(port->dev, "Soft-UART firmware not uploaded\n"); + return -ENODEV; + } + + qe_uart_initbd(qe_port); + qe_uart_init_ucc(qe_port); + + /* Install interrupt handler. */ + ret = request_irq(port->irq, qe_uart_int, IRQF_SHARED, "ucc-uart", + qe_port); + if (ret) { + dev_err(port->dev, "could not claim IRQ %u\n", port->irq); + return ret; + } + + /* Startup rx-int */ + qe_setbits_be16(&qe_port->uccp->uccm, UCC_UART_UCCE_RX); + ucc_slow_enable(qe_port->us_private, COMM_DIR_RX_AND_TX); + + return 0; +} + +/* + * Shutdown the port. + */ +static void qe_uart_shutdown(struct uart_port *port) +{ + struct uart_qe_port *qe_port = + container_of(port, struct uart_qe_port, port); + struct ucc_slow __iomem *uccp = qe_port->uccp; + unsigned int timeout = 20; + + /* Disable RX and TX */ + + /* Wait for all the BDs marked sent */ + while (!qe_uart_tx_empty(port)) { + if (!--timeout) { + dev_warn(port->dev, "shutdown timeout\n"); + break; + } + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(2); + } + + if (qe_port->wait_closing) { + /* Wait a bit longer */ + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(qe_port->wait_closing); + } + + /* Stop uarts */ + ucc_slow_disable(qe_port->us_private, COMM_DIR_RX_AND_TX); + qe_clrbits_be16(&uccp->uccm, UCC_UART_UCCE_TX | UCC_UART_UCCE_RX); + + /* Shut them really down and reinit buffer descriptors */ + ucc_slow_graceful_stop_tx(qe_port->us_private); + qe_uart_initbd(qe_port); + + free_irq(port->irq, qe_port); +} + +/* + * Set the serial port parameters. + */ +static void qe_uart_set_termios(struct uart_port *port, + struct ktermios *termios, struct ktermios *old) +{ + struct uart_qe_port *qe_port = + container_of(port, struct uart_qe_port, port); + struct ucc_slow __iomem *uccp = qe_port->uccp; + unsigned int baud; + unsigned long flags; + u16 upsmr = qe_ioread16be(&uccp->upsmr); + struct ucc_uart_pram __iomem *uccup = qe_port->uccup; + u16 supsmr = qe_ioread16be(&uccup->supsmr); + u8 char_length = 2; /* 1 + CL + PEN + 1 + SL */ + + /* Character length programmed into the mode register is the + * sum of: 1 start bit, number of data bits, 0 or 1 parity bit, + * 1 or 2 stop bits, minus 1. + * The value 'bits' counts this for us. + */ + + /* byte size */ + upsmr &= UCC_UART_UPSMR_CL_MASK; + supsmr &= UCC_UART_SUPSMR_CL_MASK; + + switch (termios->c_cflag & CSIZE) { + case CS5: + upsmr |= UCC_UART_UPSMR_CL_5; + supsmr |= UCC_UART_SUPSMR_CL_5; + char_length += 5; + break; + case CS6: + upsmr |= UCC_UART_UPSMR_CL_6; + supsmr |= UCC_UART_SUPSMR_CL_6; + char_length += 6; + break; + case CS7: + upsmr |= UCC_UART_UPSMR_CL_7; + supsmr |= UCC_UART_SUPSMR_CL_7; + char_length += 7; + break; + default: /* case CS8 */ + upsmr |= UCC_UART_UPSMR_CL_8; + supsmr |= UCC_UART_SUPSMR_CL_8; + char_length += 8; + break; + } + + /* If CSTOPB is set, we want two stop bits */ + if (termios->c_cflag & CSTOPB) { + upsmr |= UCC_UART_UPSMR_SL; + supsmr |= UCC_UART_SUPSMR_SL; + char_length++; /* + SL */ + } + + if (termios->c_cflag & PARENB) { + upsmr |= UCC_UART_UPSMR_PEN; + supsmr |= UCC_UART_SUPSMR_PEN; + char_length++; /* + PEN */ + + if (!(termios->c_cflag & PARODD)) { + upsmr &= ~(UCC_UART_UPSMR_RPM_MASK | + UCC_UART_UPSMR_TPM_MASK); + upsmr |= UCC_UART_UPSMR_RPM_EVEN | + UCC_UART_UPSMR_TPM_EVEN; + supsmr &= ~(UCC_UART_SUPSMR_RPM_MASK | + UCC_UART_SUPSMR_TPM_MASK); + supsmr |= UCC_UART_SUPSMR_RPM_EVEN | + UCC_UART_SUPSMR_TPM_EVEN; + } + } + + /* + * Set up parity check flag + */ + port->read_status_mask = BD_SC_EMPTY | BD_SC_OV; + if (termios->c_iflag & INPCK) + port->read_status_mask |= BD_SC_FR | BD_SC_PR; + if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) + port->read_status_mask |= BD_SC_BR; + + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= BD_SC_PR | BD_SC_FR; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= BD_SC_BR; + /* + * If we're ignore parity and break indicators, ignore + * overruns too. (For real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= BD_SC_OV; + } + /* + * !!! ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + port->read_status_mask &= ~BD_SC_EMPTY; + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); + + /* Do we really need a spinlock here? */ + spin_lock_irqsave(&port->lock, flags); + + /* Update the per-port timeout. */ + uart_update_timeout(port, termios->c_cflag, baud); + + qe_iowrite16be(upsmr, &uccp->upsmr); + if (soft_uart) { + qe_iowrite16be(supsmr, &uccup->supsmr); + qe_iowrite8(char_length, &uccup->rx_length); + + /* Soft-UART requires a 1X multiplier for TX */ + qe_setbrg(qe_port->us_info.rx_clock, baud, 16); + qe_setbrg(qe_port->us_info.tx_clock, baud, 1); + } else { + qe_setbrg(qe_port->us_info.rx_clock, baud, 16); + qe_setbrg(qe_port->us_info.tx_clock, baud, 16); + } + + spin_unlock_irqrestore(&port->lock, flags); +} + +/* + * Return a pointer to a string that describes what kind of port this is. + */ +static const char *qe_uart_type(struct uart_port *port) +{ + return "QE"; +} + +/* + * Allocate any memory and I/O resources required by the port. + */ +static int qe_uart_request_port(struct uart_port *port) +{ + int ret; + struct uart_qe_port *qe_port = + container_of(port, struct uart_qe_port, port); + struct ucc_slow_info *us_info = &qe_port->us_info; + struct ucc_slow_private *uccs; + unsigned int rx_size, tx_size; + void *bd_virt; + dma_addr_t bd_dma_addr = 0; + + ret = ucc_slow_init(us_info, &uccs); + if (ret) { + dev_err(port->dev, "could not initialize UCC%u\n", + qe_port->ucc_num); + return ret; + } + + qe_port->us_private = uccs; + qe_port->uccp = uccs->us_regs; + qe_port->uccup = (struct ucc_uart_pram *) uccs->us_pram; + qe_port->rx_bd_base = uccs->rx_bd; + qe_port->tx_bd_base = uccs->tx_bd; + + /* + * Allocate the transmit and receive data buffers. + */ + + rx_size = L1_CACHE_ALIGN(qe_port->rx_nrfifos * qe_port->rx_fifosize); + tx_size = L1_CACHE_ALIGN(qe_port->tx_nrfifos * qe_port->tx_fifosize); + + bd_virt = dma_alloc_coherent(port->dev, rx_size + tx_size, &bd_dma_addr, + GFP_KERNEL); + if (!bd_virt) { + dev_err(port->dev, "could not allocate buffer descriptors\n"); + return -ENOMEM; + } + + qe_port->bd_virt = bd_virt; + qe_port->bd_dma_addr = bd_dma_addr; + qe_port->bd_size = rx_size + tx_size; + + qe_port->rx_buf = bd_virt; + qe_port->tx_buf = qe_port->rx_buf + rx_size; + + return 0; +} + +/* + * Configure the port. + * + * We say we're a CPM-type port because that's mostly true. Once the device + * is configured, this driver operates almost identically to the CPM serial + * driver. + */ +static void qe_uart_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_CPM; + qe_uart_request_port(port); + } +} + +/* + * Release any memory and I/O resources that were allocated in + * qe_uart_request_port(). + */ +static void qe_uart_release_port(struct uart_port *port) +{ + struct uart_qe_port *qe_port = + container_of(port, struct uart_qe_port, port); + struct ucc_slow_private *uccs = qe_port->us_private; + + dma_free_coherent(port->dev, qe_port->bd_size, qe_port->bd_virt, + qe_port->bd_dma_addr); + + ucc_slow_free(uccs); +} + +/* + * Verify that the data in serial_struct is suitable for this device. + */ +static int qe_uart_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + if (ser->type != PORT_UNKNOWN && ser->type != PORT_CPM) + return -EINVAL; + + if (ser->irq < 0 || ser->irq >= nr_irqs) + return -EINVAL; + + if (ser->baud_base < 9600) + return -EINVAL; + + return 0; +} +/* UART operations + * + * Details on these functions can be found in Documentation/driver-api/serial/driver.rst + */ +static const struct uart_ops qe_uart_pops = { + .tx_empty = qe_uart_tx_empty, + .set_mctrl = qe_uart_set_mctrl, + .get_mctrl = qe_uart_get_mctrl, + .stop_tx = qe_uart_stop_tx, + .start_tx = qe_uart_start_tx, + .stop_rx = qe_uart_stop_rx, + .break_ctl = qe_uart_break_ctl, + .startup = qe_uart_startup, + .shutdown = qe_uart_shutdown, + .set_termios = qe_uart_set_termios, + .type = qe_uart_type, + .release_port = qe_uart_release_port, + .request_port = qe_uart_request_port, + .config_port = qe_uart_config_port, + .verify_port = qe_uart_verify_port, +}; + + +#ifdef CONFIG_PPC32 +/* + * Obtain the SOC model number and revision level + * + * This function parses the device tree to obtain the SOC model. It then + * reads the SVR register to the revision. + * + * The device tree stores the SOC model two different ways. + * + * The new way is: + * + * cpu@0 { + * compatible = "PowerPC,8323"; + * device_type = "cpu"; + * ... + * + * + * The old way is: + * PowerPC,8323@0 { + * device_type = "cpu"; + * ... + * + * This code first checks the new way, and then the old way. + */ +static unsigned int soc_info(unsigned int *rev_h, unsigned int *rev_l) +{ + struct device_node *np; + const char *soc_string; + unsigned int svr; + unsigned int soc; + + /* Find the CPU node */ + np = of_find_node_by_type(NULL, "cpu"); + if (!np) + return 0; + /* Find the compatible property */ + soc_string = of_get_property(np, "compatible", NULL); + if (!soc_string) + /* No compatible property, so try the name. */ + soc_string = np->name; + + of_node_put(np); + + /* Extract the SOC number from the "PowerPC," string */ + if ((sscanf(soc_string, "PowerPC,%u", &soc) != 1) || !soc) + return 0; + + /* Get the revision from the SVR */ + svr = mfspr(SPRN_SVR); + *rev_h = (svr >> 4) & 0xf; + *rev_l = svr & 0xf; + + return soc; +} + +/* + * requst_firmware_nowait() callback function + * + * This function is called by the kernel when a firmware is made available, + * or if it times out waiting for the firmware. + */ +static void uart_firmware_cont(const struct firmware *fw, void *context) +{ + struct qe_firmware *firmware; + struct device *dev = context; + int ret; + + if (!fw) { + dev_err(dev, "firmware not found\n"); + return; + } + + firmware = (struct qe_firmware *) fw->data; + + if (firmware->header.length != fw->size) { + dev_err(dev, "invalid firmware\n"); + goto out; + } + + ret = qe_upload_firmware(firmware); + if (ret) { + dev_err(dev, "could not load firmware\n"); + goto out; + } + + firmware_loaded = 1; + out: + release_firmware(fw); +} + +static int soft_uart_init(struct platform_device *ofdev) +{ + struct device_node *np = ofdev->dev.of_node; + struct qe_firmware_info *qe_fw_info; + int ret; + + if (of_find_property(np, "soft-uart", NULL)) { + dev_dbg(&ofdev->dev, "using Soft-UART mode\n"); + soft_uart = 1; + } else { + return 0; + } + + qe_fw_info = qe_get_firmware_info(); + + /* Check if the firmware has been uploaded. */ + if (qe_fw_info && strstr(qe_fw_info->id, "Soft-UART")) { + firmware_loaded = 1; + } else { + char filename[32]; + unsigned int soc; + unsigned int rev_h; + unsigned int rev_l; + + soc = soc_info(&rev_h, &rev_l); + if (!soc) { + dev_err(&ofdev->dev, "unknown CPU model\n"); + return -ENXIO; + } + sprintf(filename, "fsl_qe_ucode_uart_%u_%u%u.bin", + soc, rev_h, rev_l); + + dev_info(&ofdev->dev, "waiting for firmware %s\n", + filename); + + /* + * We call request_firmware_nowait instead of + * request_firmware so that the driver can load and + * initialize the ports without holding up the rest of + * the kernel. If hotplug support is enabled in the + * kernel, then we use it. + */ + ret = request_firmware_nowait(THIS_MODULE, + FW_ACTION_HOTPLUG, filename, &ofdev->dev, + GFP_KERNEL, &ofdev->dev, uart_firmware_cont); + if (ret) { + dev_err(&ofdev->dev, + "could not load firmware %s\n", + filename); + return ret; + } + } + return 0; +} + +#else /* !CONFIG_PPC32 */ + +static int soft_uart_init(struct platform_device *ofdev) +{ + return 0; +} + +#endif + + +static int ucc_uart_probe(struct platform_device *ofdev) +{ + struct device_node *np = ofdev->dev.of_node; + const char *sprop; /* String OF properties */ + struct uart_qe_port *qe_port = NULL; + struct resource res; + u32 val; + int ret; + + /* + * Determine if we need Soft-UART mode + */ + ret = soft_uart_init(ofdev); + if (ret) + return ret; + + qe_port = kzalloc(sizeof(struct uart_qe_port), GFP_KERNEL); + if (!qe_port) { + dev_err(&ofdev->dev, "can't allocate QE port structure\n"); + return -ENOMEM; + } + + /* Search for IRQ and mapbase */ + ret = of_address_to_resource(np, 0, &res); + if (ret) { + dev_err(&ofdev->dev, "missing 'reg' property in device tree\n"); + goto out_free; + } + if (!res.start) { + dev_err(&ofdev->dev, "invalid 'reg' property in device tree\n"); + ret = -EINVAL; + goto out_free; + } + qe_port->port.mapbase = res.start; + + /* Get the UCC number (device ID) */ + /* UCCs are numbered 1-7 */ + if (of_property_read_u32(np, "cell-index", &val)) { + if (of_property_read_u32(np, "device-id", &val)) { + dev_err(&ofdev->dev, "UCC is unspecified in device tree\n"); + ret = -EINVAL; + goto out_free; + } + } + + if (val < 1 || val > UCC_MAX_NUM) { + dev_err(&ofdev->dev, "no support for UCC%u\n", val); + ret = -ENODEV; + goto out_free; + } + qe_port->ucc_num = val - 1; + + /* + * In the future, we should not require the BRG to be specified in the + * device tree. If no clock-source is specified, then just pick a BRG + * to use. This requires a new QE library function that manages BRG + * assignments. + */ + + sprop = of_get_property(np, "rx-clock-name", NULL); + if (!sprop) { + dev_err(&ofdev->dev, "missing rx-clock-name in device tree\n"); + ret = -ENODEV; + goto out_free; + } + + qe_port->us_info.rx_clock = qe_clock_source(sprop); + if ((qe_port->us_info.rx_clock < QE_BRG1) || + (qe_port->us_info.rx_clock > QE_BRG16)) { + dev_err(&ofdev->dev, "rx-clock-name must be a BRG for UART\n"); + ret = -ENODEV; + goto out_free; + } + +#ifdef LOOPBACK + /* In internal loopback mode, TX and RX must use the same clock */ + qe_port->us_info.tx_clock = qe_port->us_info.rx_clock; +#else + sprop = of_get_property(np, "tx-clock-name", NULL); + if (!sprop) { + dev_err(&ofdev->dev, "missing tx-clock-name in device tree\n"); + ret = -ENODEV; + goto out_free; + } + qe_port->us_info.tx_clock = qe_clock_source(sprop); +#endif + if ((qe_port->us_info.tx_clock < QE_BRG1) || + (qe_port->us_info.tx_clock > QE_BRG16)) { + dev_err(&ofdev->dev, "tx-clock-name must be a BRG for UART\n"); + ret = -ENODEV; + goto out_free; + } + + /* Get the port number, numbered 0-3 */ + if (of_property_read_u32(np, "port-number", &val)) { + dev_err(&ofdev->dev, "missing port-number in device tree\n"); + ret = -EINVAL; + goto out_free; + } + qe_port->port.line = val; + if (qe_port->port.line >= UCC_MAX_UART) { + dev_err(&ofdev->dev, "port-number must be 0-%u\n", + UCC_MAX_UART - 1); + ret = -EINVAL; + goto out_free; + } + + qe_port->port.irq = irq_of_parse_and_map(np, 0); + if (qe_port->port.irq == 0) { + dev_err(&ofdev->dev, "could not map IRQ for UCC%u\n", + qe_port->ucc_num + 1); + ret = -EINVAL; + goto out_free; + } + + /* + * Newer device trees have an "fsl,qe" compatible property for the QE + * node, but we still need to support older device trees. + */ + np = of_find_compatible_node(NULL, NULL, "fsl,qe"); + if (!np) { + np = of_find_node_by_type(NULL, "qe"); + if (!np) { + dev_err(&ofdev->dev, "could not find 'qe' node\n"); + ret = -EINVAL; + goto out_free; + } + } + + if (of_property_read_u32(np, "brg-frequency", &val)) { + dev_err(&ofdev->dev, + "missing brg-frequency in device tree\n"); + ret = -EINVAL; + goto out_np; + } + + if (val) + qe_port->port.uartclk = val; + else { + if (!IS_ENABLED(CONFIG_PPC32)) { + dev_err(&ofdev->dev, + "invalid brg-frequency in device tree\n"); + ret = -EINVAL; + goto out_np; + } + + /* + * Older versions of U-Boot do not initialize the brg-frequency + * property, so in this case we assume the BRG frequency is + * half the QE bus frequency. + */ + if (of_property_read_u32(np, "bus-frequency", &val)) { + dev_err(&ofdev->dev, + "missing QE bus-frequency in device tree\n"); + ret = -EINVAL; + goto out_np; + } + if (val) + qe_port->port.uartclk = val / 2; + else { + dev_err(&ofdev->dev, + "invalid QE bus-frequency in device tree\n"); + ret = -EINVAL; + goto out_np; + } + } + + spin_lock_init(&qe_port->port.lock); + qe_port->np = np; + qe_port->port.dev = &ofdev->dev; + qe_port->port.ops = &qe_uart_pops; + qe_port->port.iotype = UPIO_MEM; + + qe_port->tx_nrfifos = TX_NUM_FIFO; + qe_port->tx_fifosize = TX_BUF_SIZE; + qe_port->rx_nrfifos = RX_NUM_FIFO; + qe_port->rx_fifosize = RX_BUF_SIZE; + + qe_port->wait_closing = UCC_WAIT_CLOSING; + qe_port->port.fifosize = 512; + qe_port->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP; + + qe_port->us_info.ucc_num = qe_port->ucc_num; + qe_port->us_info.regs = (phys_addr_t) res.start; + qe_port->us_info.irq = qe_port->port.irq; + + qe_port->us_info.rx_bd_ring_len = qe_port->rx_nrfifos; + qe_port->us_info.tx_bd_ring_len = qe_port->tx_nrfifos; + + /* Make sure ucc_slow_init() initializes both TX and RX */ + qe_port->us_info.init_tx = 1; + qe_port->us_info.init_rx = 1; + + /* Add the port to the uart sub-system. This will cause + * qe_uart_config_port() to be called, so the us_info structure must + * be initialized. + */ + ret = uart_add_one_port(&ucc_uart_driver, &qe_port->port); + if (ret) { + dev_err(&ofdev->dev, "could not add /dev/ttyQE%u\n", + qe_port->port.line); + goto out_np; + } + + platform_set_drvdata(ofdev, qe_port); + + dev_info(&ofdev->dev, "UCC%u assigned to /dev/ttyQE%u\n", + qe_port->ucc_num + 1, qe_port->port.line); + + /* Display the mknod command for this device */ + dev_dbg(&ofdev->dev, "mknod command is 'mknod /dev/ttyQE%u c %u %u'\n", + qe_port->port.line, SERIAL_QE_MAJOR, + SERIAL_QE_MINOR + qe_port->port.line); + + return 0; +out_np: + of_node_put(np); +out_free: + kfree(qe_port); + return ret; +} + +static int ucc_uart_remove(struct platform_device *ofdev) +{ + struct uart_qe_port *qe_port = platform_get_drvdata(ofdev); + + dev_info(&ofdev->dev, "removing /dev/ttyQE%u\n", qe_port->port.line); + + uart_remove_one_port(&ucc_uart_driver, &qe_port->port); + + kfree(qe_port); + + return 0; +} + +static const struct of_device_id ucc_uart_match[] = { + { + .type = "serial", + .compatible = "ucc_uart", + }, + { + .compatible = "fsl,t1040-ucc-uart", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, ucc_uart_match); + +static struct platform_driver ucc_uart_of_driver = { + .driver = { + .name = "ucc_uart", + .of_match_table = ucc_uart_match, + }, + .probe = ucc_uart_probe, + .remove = ucc_uart_remove, +}; + +static int __init ucc_uart_init(void) +{ + int ret; + + printk(KERN_INFO "Freescale QUICC Engine UART device driver\n"); +#ifdef LOOPBACK + printk(KERN_INFO "ucc-uart: Using loopback mode\n"); +#endif + + ret = uart_register_driver(&ucc_uart_driver); + if (ret) { + printk(KERN_ERR "ucc-uart: could not register UART driver\n"); + return ret; + } + + ret = platform_driver_register(&ucc_uart_of_driver); + if (ret) { + printk(KERN_ERR + "ucc-uart: could not register platform driver\n"); + uart_unregister_driver(&ucc_uart_driver); + } + + return ret; +} + +static void __exit ucc_uart_exit(void) +{ + printk(KERN_INFO + "Freescale QUICC Engine UART device driver unloading\n"); + + platform_driver_unregister(&ucc_uart_of_driver); + uart_unregister_driver(&ucc_uart_driver); +} + +module_init(ucc_uart_init); +module_exit(ucc_uart_exit); + +MODULE_DESCRIPTION("Freescale QUICC Engine (QE) UART"); +MODULE_AUTHOR("Timur Tabi "); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_QE_MAJOR); + diff --git a/drivers/tty/serial/vr41xx_siu.c b/drivers/tty/serial/vr41xx_siu.c new file mode 100644 index 000000000..eeb4b6568 --- /dev/null +++ b/drivers/tty/serial/vr41xx_siu.c @@ -0,0 +1,947 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver for NEC VR4100 series Serial Interface Unit. + * + * Copyright (C) 2004-2008 Yoichi Yuasa + * + * Based on drivers/serial/8250.c, by Russell King. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define SIU_BAUD_BASE 1152000 +#define SIU_MAJOR 204 +#define SIU_MINOR_BASE 82 + +#define RX_MAX_COUNT 256 +#define TX_MAX_COUNT 15 + +#define SIUIRSEL 0x08 + #define TMICMODE 0x20 + #define TMICTX 0x10 + #define IRMSEL 0x0c + #define IRMSEL_HP 0x08 + #define IRMSEL_TEMIC 0x04 + #define IRMSEL_SHARP 0x00 + #define IRUSESEL 0x02 + #define SIRSEL 0x01 + +static struct uart_port siu_uart_ports[SIU_PORTS_MAX] = { + [0 ... SIU_PORTS_MAX-1] = { + .lock = __SPIN_LOCK_UNLOCKED(siu_uart_ports->lock), + .irq = 0, + }, +}; + +#ifdef CONFIG_SERIAL_VR41XX_CONSOLE +static uint8_t lsr_break_flag[SIU_PORTS_MAX]; +#endif + +#define siu_read(port, offset) readb((port)->membase + (offset)) +#define siu_write(port, offset, value) writeb((value), (port)->membase + (offset)) + +void vr41xx_select_siu_interface(siu_interface_t interface) +{ + struct uart_port *port; + unsigned long flags; + uint8_t irsel; + + port = &siu_uart_ports[0]; + + spin_lock_irqsave(&port->lock, flags); + + irsel = siu_read(port, SIUIRSEL); + if (interface == SIU_INTERFACE_IRDA) + irsel |= SIRSEL; + else + irsel &= ~SIRSEL; + siu_write(port, SIUIRSEL, irsel); + + spin_unlock_irqrestore(&port->lock, flags); +} +EXPORT_SYMBOL_GPL(vr41xx_select_siu_interface); + +void vr41xx_use_irda(irda_use_t use) +{ + struct uart_port *port; + unsigned long flags; + uint8_t irsel; + + port = &siu_uart_ports[0]; + + spin_lock_irqsave(&port->lock, flags); + + irsel = siu_read(port, SIUIRSEL); + if (use == FIR_USE_IRDA) + irsel |= IRUSESEL; + else + irsel &= ~IRUSESEL; + siu_write(port, SIUIRSEL, irsel); + + spin_unlock_irqrestore(&port->lock, flags); +} +EXPORT_SYMBOL_GPL(vr41xx_use_irda); + +void vr41xx_select_irda_module(irda_module_t module, irda_speed_t speed) +{ + struct uart_port *port; + unsigned long flags; + uint8_t irsel; + + port = &siu_uart_ports[0]; + + spin_lock_irqsave(&port->lock, flags); + + irsel = siu_read(port, SIUIRSEL); + irsel &= ~(IRMSEL | TMICTX | TMICMODE); + switch (module) { + case SHARP_IRDA: + irsel |= IRMSEL_SHARP; + break; + case TEMIC_IRDA: + irsel |= IRMSEL_TEMIC | TMICMODE; + if (speed == IRDA_TX_4MBPS) + irsel |= TMICTX; + break; + case HP_IRDA: + irsel |= IRMSEL_HP; + break; + default: + break; + } + siu_write(port, SIUIRSEL, irsel); + + spin_unlock_irqrestore(&port->lock, flags); +} +EXPORT_SYMBOL_GPL(vr41xx_select_irda_module); + +static inline void siu_clear_fifo(struct uart_port *port) +{ + siu_write(port, UART_FCR, UART_FCR_ENABLE_FIFO); + siu_write(port, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | + UART_FCR_CLEAR_XMIT); + siu_write(port, UART_FCR, 0); +} + +static inline unsigned long siu_port_size(struct uart_port *port) +{ + switch (port->type) { + case PORT_VR41XX_SIU: + return 11UL; + case PORT_VR41XX_DSIU: + return 8UL; + } + + return 0; +} + +static inline unsigned int siu_check_type(struct uart_port *port) +{ + if (port->line == 0) + return PORT_VR41XX_SIU; + if (port->line == 1 && port->irq) + return PORT_VR41XX_DSIU; + + return PORT_UNKNOWN; +} + +static inline const char *siu_type_name(struct uart_port *port) +{ + switch (port->type) { + case PORT_VR41XX_SIU: + return "SIU"; + case PORT_VR41XX_DSIU: + return "DSIU"; + } + + return NULL; +} + +static unsigned int siu_tx_empty(struct uart_port *port) +{ + uint8_t lsr; + + lsr = siu_read(port, UART_LSR); + if (lsr & UART_LSR_TEMT) + return TIOCSER_TEMT; + + return 0; +} + +static void siu_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + uint8_t mcr = 0; + + if (mctrl & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (mctrl & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (mctrl & TIOCM_OUT1) + mcr |= UART_MCR_OUT1; + if (mctrl & TIOCM_OUT2) + mcr |= UART_MCR_OUT2; + if (mctrl & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + siu_write(port, UART_MCR, mcr); +} + +static unsigned int siu_get_mctrl(struct uart_port *port) +{ + uint8_t msr; + unsigned int mctrl = 0; + + msr = siu_read(port, UART_MSR); + if (msr & UART_MSR_DCD) + mctrl |= TIOCM_CAR; + if (msr & UART_MSR_RI) + mctrl |= TIOCM_RNG; + if (msr & UART_MSR_DSR) + mctrl |= TIOCM_DSR; + if (msr & UART_MSR_CTS) + mctrl |= TIOCM_CTS; + + return mctrl; +} + +static void siu_stop_tx(struct uart_port *port) +{ + unsigned long flags; + uint8_t ier; + + spin_lock_irqsave(&port->lock, flags); + + ier = siu_read(port, UART_IER); + ier &= ~UART_IER_THRI; + siu_write(port, UART_IER, ier); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void siu_start_tx(struct uart_port *port) +{ + unsigned long flags; + uint8_t ier; + + spin_lock_irqsave(&port->lock, flags); + + ier = siu_read(port, UART_IER); + ier |= UART_IER_THRI; + siu_write(port, UART_IER, ier); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void siu_stop_rx(struct uart_port *port) +{ + unsigned long flags; + uint8_t ier; + + spin_lock_irqsave(&port->lock, flags); + + ier = siu_read(port, UART_IER); + ier &= ~UART_IER_RLSI; + siu_write(port, UART_IER, ier); + + port->read_status_mask &= ~UART_LSR_DR; + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void siu_enable_ms(struct uart_port *port) +{ + unsigned long flags; + uint8_t ier; + + spin_lock_irqsave(&port->lock, flags); + + ier = siu_read(port, UART_IER); + ier |= UART_IER_MSI; + siu_write(port, UART_IER, ier); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void siu_break_ctl(struct uart_port *port, int ctl) +{ + unsigned long flags; + uint8_t lcr; + + spin_lock_irqsave(&port->lock, flags); + + lcr = siu_read(port, UART_LCR); + if (ctl == -1) + lcr |= UART_LCR_SBC; + else + lcr &= ~UART_LCR_SBC; + siu_write(port, UART_LCR, lcr); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static inline void receive_chars(struct uart_port *port, uint8_t *status) +{ + uint8_t lsr, ch; + char flag; + int max_count = RX_MAX_COUNT; + + lsr = *status; + + do { + ch = siu_read(port, UART_RX); + port->icount.rx++; + flag = TTY_NORMAL; + +#ifdef CONFIG_SERIAL_VR41XX_CONSOLE + lsr |= lsr_break_flag[port->line]; + lsr_break_flag[port->line] = 0; +#endif + if (unlikely(lsr & (UART_LSR_BI | UART_LSR_FE | + UART_LSR_PE | UART_LSR_OE))) { + if (lsr & UART_LSR_BI) { + lsr &= ~(UART_LSR_FE | UART_LSR_PE); + port->icount.brk++; + + if (uart_handle_break(port)) + goto ignore_char; + } + + if (lsr & UART_LSR_FE) + port->icount.frame++; + if (lsr & UART_LSR_PE) + port->icount.parity++; + if (lsr & UART_LSR_OE) + port->icount.overrun++; + + lsr &= port->read_status_mask; + if (lsr & UART_LSR_BI) + flag = TTY_BREAK; + if (lsr & UART_LSR_FE) + flag = TTY_FRAME; + if (lsr & UART_LSR_PE) + flag = TTY_PARITY; + } + + if (uart_handle_sysrq_char(port, ch)) + goto ignore_char; + + uart_insert_char(port, lsr, UART_LSR_OE, ch, flag); + + ignore_char: + lsr = siu_read(port, UART_LSR); + } while ((lsr & UART_LSR_DR) && (max_count-- > 0)); + + tty_flip_buffer_push(&port->state->port); + + *status = lsr; +} + +static inline void check_modem_status(struct uart_port *port) +{ + uint8_t msr; + + msr = siu_read(port, UART_MSR); + if ((msr & UART_MSR_ANY_DELTA) == 0) + return; + if (msr & UART_MSR_DDCD) + uart_handle_dcd_change(port, msr & UART_MSR_DCD); + if (msr & UART_MSR_TERI) + port->icount.rng++; + if (msr & UART_MSR_DDSR) + port->icount.dsr++; + if (msr & UART_MSR_DCTS) + uart_handle_cts_change(port, msr & UART_MSR_CTS); + + wake_up_interruptible(&port->state->port.delta_msr_wait); +} + +static inline void transmit_chars(struct uart_port *port) +{ + struct circ_buf *xmit; + int max_count = TX_MAX_COUNT; + + xmit = &port->state->xmit; + + if (port->x_char) { + siu_write(port, UART_TX, port->x_char); + port->icount.tx++; + port->x_char = 0; + return; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + siu_stop_tx(port); + return; + } + + do { + siu_write(port, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (max_count-- > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + siu_stop_tx(port); +} + +static irqreturn_t siu_interrupt(int irq, void *dev_id) +{ + struct uart_port *port; + uint8_t iir, lsr; + + port = (struct uart_port *)dev_id; + + iir = siu_read(port, UART_IIR); + if (iir & UART_IIR_NO_INT) + return IRQ_NONE; + + lsr = siu_read(port, UART_LSR); + if (lsr & UART_LSR_DR) + receive_chars(port, &lsr); + + check_modem_status(port); + + if (lsr & UART_LSR_THRE) + transmit_chars(port); + + return IRQ_HANDLED; +} + +static int siu_startup(struct uart_port *port) +{ + int retval; + + if (port->membase == NULL) + return -ENODEV; + + siu_clear_fifo(port); + + (void)siu_read(port, UART_LSR); + (void)siu_read(port, UART_RX); + (void)siu_read(port, UART_IIR); + (void)siu_read(port, UART_MSR); + + if (siu_read(port, UART_LSR) == 0xff) + return -ENODEV; + + retval = request_irq(port->irq, siu_interrupt, 0, siu_type_name(port), port); + if (retval) + return retval; + + if (port->type == PORT_VR41XX_DSIU) + vr41xx_enable_dsiuint(DSIUINT_ALL); + + siu_write(port, UART_LCR, UART_LCR_WLEN8); + + spin_lock_irq(&port->lock); + siu_set_mctrl(port, port->mctrl); + spin_unlock_irq(&port->lock); + + siu_write(port, UART_IER, UART_IER_RLSI | UART_IER_RDI); + + (void)siu_read(port, UART_LSR); + (void)siu_read(port, UART_RX); + (void)siu_read(port, UART_IIR); + (void)siu_read(port, UART_MSR); + + return 0; +} + +static void siu_shutdown(struct uart_port *port) +{ + unsigned long flags; + uint8_t lcr; + + siu_write(port, UART_IER, 0); + + spin_lock_irqsave(&port->lock, flags); + + port->mctrl &= ~TIOCM_OUT2; + siu_set_mctrl(port, port->mctrl); + + spin_unlock_irqrestore(&port->lock, flags); + + lcr = siu_read(port, UART_LCR); + lcr &= ~UART_LCR_SBC; + siu_write(port, UART_LCR, lcr); + + siu_clear_fifo(port); + + (void)siu_read(port, UART_RX); + + if (port->type == PORT_VR41XX_DSIU) + vr41xx_disable_dsiuint(DSIUINT_ALL); + + free_irq(port->irq, port); +} + +static void siu_set_termios(struct uart_port *port, struct ktermios *new, + struct ktermios *old) +{ + tcflag_t c_cflag, c_iflag; + uint8_t lcr, fcr, ier; + unsigned int baud, quot; + unsigned long flags; + + c_cflag = new->c_cflag; + switch (c_cflag & CSIZE) { + case CS5: + lcr = UART_LCR_WLEN5; + break; + case CS6: + lcr = UART_LCR_WLEN6; + break; + case CS7: + lcr = UART_LCR_WLEN7; + break; + default: + lcr = UART_LCR_WLEN8; + break; + } + + if (c_cflag & CSTOPB) + lcr |= UART_LCR_STOP; + if (c_cflag & PARENB) + lcr |= UART_LCR_PARITY; + if ((c_cflag & PARODD) != PARODD) + lcr |= UART_LCR_EPAR; + if (c_cflag & CMSPAR) + lcr |= UART_LCR_SPAR; + + baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10; + + spin_lock_irqsave(&port->lock, flags); + + uart_update_timeout(port, c_cflag, baud); + + c_iflag = new->c_iflag; + + port->read_status_mask = UART_LSR_THRE | UART_LSR_OE | UART_LSR_DR; + if (c_iflag & INPCK) + port->read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (c_iflag & (IGNBRK | BRKINT | PARMRK)) + port->read_status_mask |= UART_LSR_BI; + + port->ignore_status_mask = 0; + if (c_iflag & IGNPAR) + port->ignore_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (c_iflag & IGNBRK) { + port->ignore_status_mask |= UART_LSR_BI; + if (c_iflag & IGNPAR) + port->ignore_status_mask |= UART_LSR_OE; + } + + if ((c_cflag & CREAD) == 0) + port->ignore_status_mask |= UART_LSR_DR; + + ier = siu_read(port, UART_IER); + ier &= ~UART_IER_MSI; + if (UART_ENABLE_MS(port, c_cflag)) + ier |= UART_IER_MSI; + siu_write(port, UART_IER, ier); + + siu_write(port, UART_LCR, lcr | UART_LCR_DLAB); + + siu_write(port, UART_DLL, (uint8_t)quot); + siu_write(port, UART_DLM, (uint8_t)(quot >> 8)); + + siu_write(port, UART_LCR, lcr); + + siu_write(port, UART_FCR, fcr); + + siu_set_mctrl(port, port->mctrl); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void siu_pm(struct uart_port *port, unsigned int state, unsigned int oldstate) +{ + switch (state) { + case 0: + switch (port->type) { + case PORT_VR41XX_SIU: + vr41xx_supply_clock(SIU_CLOCK); + break; + case PORT_VR41XX_DSIU: + vr41xx_supply_clock(DSIU_CLOCK); + break; + } + break; + case 3: + switch (port->type) { + case PORT_VR41XX_SIU: + vr41xx_mask_clock(SIU_CLOCK); + break; + case PORT_VR41XX_DSIU: + vr41xx_mask_clock(DSIU_CLOCK); + break; + } + break; + } +} + +static const char *siu_type(struct uart_port *port) +{ + return siu_type_name(port); +} + +static void siu_release_port(struct uart_port *port) +{ + unsigned long size; + + if (port->flags & UPF_IOREMAP) { + iounmap(port->membase); + port->membase = NULL; + } + + size = siu_port_size(port); + release_mem_region(port->mapbase, size); +} + +static int siu_request_port(struct uart_port *port) +{ + unsigned long size; + struct resource *res; + + size = siu_port_size(port); + res = request_mem_region(port->mapbase, size, siu_type_name(port)); + if (res == NULL) + return -EBUSY; + + if (port->flags & UPF_IOREMAP) { + port->membase = ioremap(port->mapbase, size); + if (port->membase == NULL) { + release_resource(res); + return -ENOMEM; + } + } + + return 0; +} + +static void siu_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = siu_check_type(port); + (void)siu_request_port(port); + } +} + +static int siu_verify_port(struct uart_port *port, struct serial_struct *serial) +{ + if (port->type != PORT_VR41XX_SIU && port->type != PORT_VR41XX_DSIU) + return -EINVAL; + if (port->irq != serial->irq) + return -EINVAL; + if (port->iotype != serial->io_type) + return -EINVAL; + if (port->mapbase != (unsigned long)serial->iomem_base) + return -EINVAL; + + return 0; +} + +static const struct uart_ops siu_uart_ops = { + .tx_empty = siu_tx_empty, + .set_mctrl = siu_set_mctrl, + .get_mctrl = siu_get_mctrl, + .stop_tx = siu_stop_tx, + .start_tx = siu_start_tx, + .stop_rx = siu_stop_rx, + .enable_ms = siu_enable_ms, + .break_ctl = siu_break_ctl, + .startup = siu_startup, + .shutdown = siu_shutdown, + .set_termios = siu_set_termios, + .pm = siu_pm, + .type = siu_type, + .release_port = siu_release_port, + .request_port = siu_request_port, + .config_port = siu_config_port, + .verify_port = siu_verify_port, +}; + +static int siu_init_ports(struct platform_device *pdev) +{ + struct uart_port *port; + struct resource *res; + int *type = dev_get_platdata(&pdev->dev); + int i; + + if (!type) + return 0; + + port = siu_uart_ports; + for (i = 0; i < SIU_PORTS_MAX; i++) { + port->type = type[i]; + if (port->type == PORT_UNKNOWN) + continue; + port->irq = platform_get_irq(pdev, i); + port->uartclk = SIU_BAUD_BASE * 16; + port->fifosize = 16; + port->regshift = 0; + port->iotype = UPIO_MEM; + port->flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; + port->line = i; + res = platform_get_resource(pdev, IORESOURCE_MEM, i); + port->mapbase = res->start; + port++; + } + + return i; +} + +#ifdef CONFIG_SERIAL_VR41XX_CONSOLE + +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +static void wait_for_xmitr(struct uart_port *port) +{ + int timeout = 10000; + uint8_t lsr, msr; + + do { + lsr = siu_read(port, UART_LSR); + if (lsr & UART_LSR_BI) + lsr_break_flag[port->line] = UART_LSR_BI; + + if ((lsr & BOTH_EMPTY) == BOTH_EMPTY) + break; + } while (timeout-- > 0); + + if (port->flags & UPF_CONS_FLOW) { + timeout = 1000000; + + do { + msr = siu_read(port, UART_MSR); + if ((msr & UART_MSR_CTS) != 0) + break; + } while (timeout-- > 0); + } +} + +static void siu_console_putchar(struct uart_port *port, int ch) +{ + wait_for_xmitr(port); + siu_write(port, UART_TX, ch); +} + +static void siu_console_write(struct console *con, const char *s, unsigned count) +{ + struct uart_port *port; + uint8_t ier; + + port = &siu_uart_ports[con->index]; + + ier = siu_read(port, UART_IER); + siu_write(port, UART_IER, 0); + + uart_console_write(port, s, count, siu_console_putchar); + + wait_for_xmitr(port); + siu_write(port, UART_IER, ier); +} + +static int __init siu_console_setup(struct console *con, char *options) +{ + struct uart_port *port; + int baud = 9600; + int parity = 'n'; + int bits = 8; + int flow = 'n'; + + if (con->index >= SIU_PORTS_MAX) + con->index = 0; + + port = &siu_uart_ports[con->index]; + if (port->membase == NULL) { + if (port->mapbase == 0) + return -ENODEV; + port->membase = ioremap(port->mapbase, siu_port_size(port)); + } + + if (port->type == PORT_VR41XX_SIU) + vr41xx_select_siu_interface(SIU_INTERFACE_RS232C); + + if (options != NULL) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, con, baud, parity, bits, flow); +} + +static struct uart_driver siu_uart_driver; + +static struct console siu_console = { + .name = "ttyVR", + .write = siu_console_write, + .device = uart_console_device, + .setup = siu_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &siu_uart_driver, +}; + +static int siu_console_init(void) +{ + struct uart_port *port; + int i; + + for (i = 0; i < SIU_PORTS_MAX; i++) { + port = &siu_uart_ports[i]; + port->ops = &siu_uart_ops; + } + + register_console(&siu_console); + + return 0; +} + +console_initcall(siu_console_init); + +void __init vr41xx_siu_early_setup(struct uart_port *port) +{ + if (port->type == PORT_UNKNOWN) + return; + + siu_uart_ports[port->line].line = port->line; + siu_uart_ports[port->line].type = port->type; + siu_uart_ports[port->line].uartclk = SIU_BAUD_BASE * 16; + siu_uart_ports[port->line].mapbase = port->mapbase; + siu_uart_ports[port->line].ops = &siu_uart_ops; +} + +#define SERIAL_VR41XX_CONSOLE &siu_console +#else +#define SERIAL_VR41XX_CONSOLE NULL +#endif + +static struct uart_driver siu_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "SIU", + .dev_name = "ttyVR", + .major = SIU_MAJOR, + .minor = SIU_MINOR_BASE, + .cons = SERIAL_VR41XX_CONSOLE, +}; + +static int siu_probe(struct platform_device *dev) +{ + struct uart_port *port; + int num, i, retval; + + num = siu_init_ports(dev); + if (num <= 0) + return -ENODEV; + + siu_uart_driver.nr = num; + retval = uart_register_driver(&siu_uart_driver); + if (retval) + return retval; + + for (i = 0; i < num; i++) { + port = &siu_uart_ports[i]; + port->ops = &siu_uart_ops; + port->dev = &dev->dev; + port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_VR41XX_CONSOLE); + + retval = uart_add_one_port(&siu_uart_driver, port); + if (retval < 0) { + port->dev = NULL; + break; + } + } + + if (i == 0 && retval < 0) { + uart_unregister_driver(&siu_uart_driver); + return retval; + } + + return 0; +} + +static int siu_remove(struct platform_device *dev) +{ + struct uart_port *port; + int i; + + for (i = 0; i < siu_uart_driver.nr; i++) { + port = &siu_uart_ports[i]; + if (port->dev == &dev->dev) { + uart_remove_one_port(&siu_uart_driver, port); + port->dev = NULL; + } + } + + uart_unregister_driver(&siu_uart_driver); + + return 0; +} + +static int siu_suspend(struct platform_device *dev, pm_message_t state) +{ + struct uart_port *port; + int i; + + for (i = 0; i < siu_uart_driver.nr; i++) { + port = &siu_uart_ports[i]; + if ((port->type == PORT_VR41XX_SIU || + port->type == PORT_VR41XX_DSIU) && port->dev == &dev->dev) + uart_suspend_port(&siu_uart_driver, port); + + } + + return 0; +} + +static int siu_resume(struct platform_device *dev) +{ + struct uart_port *port; + int i; + + for (i = 0; i < siu_uart_driver.nr; i++) { + port = &siu_uart_ports[i]; + if ((port->type == PORT_VR41XX_SIU || + port->type == PORT_VR41XX_DSIU) && port->dev == &dev->dev) + uart_resume_port(&siu_uart_driver, port); + } + + return 0; +} + +static struct platform_driver siu_device_driver = { + .probe = siu_probe, + .remove = siu_remove, + .suspend = siu_suspend, + .resume = siu_resume, + .driver = { + .name = "SIU", + }, +}; + +module_platform_driver(siu_device_driver); + +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:SIU"); diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c new file mode 100644 index 000000000..764e99243 --- /dev/null +++ b/drivers/tty/serial/vt8500_serial.c @@ -0,0 +1,745 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2010 Alexey Charkov + * + * Based on msm_serial.c, which is: + * Copyright (C) 2007 Google, Inc. + * Author: Robert Love + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * UART Register offsets + */ + +#define VT8500_URTDR 0x0000 /* Transmit data */ +#define VT8500_URRDR 0x0004 /* Receive data */ +#define VT8500_URDIV 0x0008 /* Clock/Baud rate divisor */ +#define VT8500_URLCR 0x000C /* Line control */ +#define VT8500_URICR 0x0010 /* IrDA control */ +#define VT8500_URIER 0x0014 /* Interrupt enable */ +#define VT8500_URISR 0x0018 /* Interrupt status */ +#define VT8500_URUSR 0x001c /* UART status */ +#define VT8500_URFCR 0x0020 /* FIFO control */ +#define VT8500_URFIDX 0x0024 /* FIFO index */ +#define VT8500_URBKR 0x0028 /* Break signal count */ +#define VT8500_URTOD 0x002c /* Time out divisor */ +#define VT8500_TXFIFO 0x1000 /* Transmit FIFO (16x8) */ +#define VT8500_RXFIFO 0x1020 /* Receive FIFO (16x10) */ + +/* + * Interrupt enable and status bits + */ + +#define TXDE (1 << 0) /* Tx Data empty */ +#define RXDF (1 << 1) /* Rx Data full */ +#define TXFAE (1 << 2) /* Tx FIFO almost empty */ +#define TXFE (1 << 3) /* Tx FIFO empty */ +#define RXFAF (1 << 4) /* Rx FIFO almost full */ +#define RXFF (1 << 5) /* Rx FIFO full */ +#define TXUDR (1 << 6) /* Tx underrun */ +#define RXOVER (1 << 7) /* Rx overrun */ +#define PER (1 << 8) /* Parity error */ +#define FER (1 << 9) /* Frame error */ +#define TCTS (1 << 10) /* Toggle of CTS */ +#define RXTOUT (1 << 11) /* Rx timeout */ +#define BKDONE (1 << 12) /* Break signal done */ +#define ERR (1 << 13) /* AHB error response */ + +#define RX_FIFO_INTS (RXFAF | RXFF | RXOVER | PER | FER | RXTOUT) +#define TX_FIFO_INTS (TXFAE | TXFE | TXUDR) + +/* + * Line control bits + */ + +#define VT8500_TXEN (1 << 0) /* Enable transmit logic */ +#define VT8500_RXEN (1 << 1) /* Enable receive logic */ +#define VT8500_CS8 (1 << 2) /* 8-bit data length (vs. 7-bit) */ +#define VT8500_CSTOPB (1 << 3) /* 2 stop bits (vs. 1) */ +#define VT8500_PARENB (1 << 4) /* Enable parity */ +#define VT8500_PARODD (1 << 5) /* Odd parity (vs. even) */ +#define VT8500_RTS (1 << 6) /* Ready to send */ +#define VT8500_LOOPBK (1 << 7) /* Enable internal loopback */ +#define VT8500_DMA (1 << 8) /* Enable DMA mode (needs FIFO) */ +#define VT8500_BREAK (1 << 9) /* Initiate break signal */ +#define VT8500_PSLVERR (1 << 10) /* APB error upon empty RX FIFO read */ +#define VT8500_SWRTSCTS (1 << 11) /* Software-controlled RTS/CTS */ + +/* + * Capability flags (driver-internal) + */ + +#define VT8500_HAS_SWRTSCTS_SWITCH (1 << 1) + +#define VT8500_RECOMMENDED_CLK 12000000 +#define VT8500_OVERSAMPLING_DIVISOR 13 +#define VT8500_MAX_PORTS 6 + +struct vt8500_port { + struct uart_port uart; + char name[16]; + struct clk *clk; + unsigned int clk_predivisor; + unsigned int ier; + unsigned int vt8500_uart_flags; +}; + +/* + * we use this variable to keep track of which ports + * have been allocated as we can't use pdev->id in + * devicetree + */ +static DECLARE_BITMAP(vt8500_ports_in_use, VT8500_MAX_PORTS); + +static inline void vt8500_write(struct uart_port *port, unsigned int val, + unsigned int off) +{ + writel(val, port->membase + off); +} + +static inline unsigned int vt8500_read(struct uart_port *port, unsigned int off) +{ + return readl(port->membase + off); +} + +static void vt8500_stop_tx(struct uart_port *port) +{ + struct vt8500_port *vt8500_port = container_of(port, + struct vt8500_port, + uart); + + vt8500_port->ier &= ~TX_FIFO_INTS; + vt8500_write(port, vt8500_port->ier, VT8500_URIER); +} + +static void vt8500_stop_rx(struct uart_port *port) +{ + struct vt8500_port *vt8500_port = container_of(port, + struct vt8500_port, + uart); + + vt8500_port->ier &= ~RX_FIFO_INTS; + vt8500_write(port, vt8500_port->ier, VT8500_URIER); +} + +static void vt8500_enable_ms(struct uart_port *port) +{ + struct vt8500_port *vt8500_port = container_of(port, + struct vt8500_port, + uart); + + vt8500_port->ier |= TCTS; + vt8500_write(port, vt8500_port->ier, VT8500_URIER); +} + +static void handle_rx(struct uart_port *port) +{ + struct tty_port *tport = &port->state->port; + + /* + * Handle overrun + */ + if ((vt8500_read(port, VT8500_URISR) & RXOVER)) { + port->icount.overrun++; + tty_insert_flip_char(tport, 0, TTY_OVERRUN); + } + + /* and now the main RX loop */ + while (vt8500_read(port, VT8500_URFIDX) & 0x1f00) { + unsigned int c; + char flag = TTY_NORMAL; + + c = readw(port->membase + VT8500_RXFIFO) & 0x3ff; + + /* Mask conditions we're ignorning. */ + c &= ~port->read_status_mask; + + if (c & FER) { + port->icount.frame++; + flag = TTY_FRAME; + } else if (c & PER) { + port->icount.parity++; + flag = TTY_PARITY; + } + port->icount.rx++; + + if (!uart_handle_sysrq_char(port, c)) + tty_insert_flip_char(tport, c, flag); + } + + spin_unlock(&port->lock); + tty_flip_buffer_push(tport); + spin_lock(&port->lock); +} + +static void handle_tx(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + + if (port->x_char) { + writeb(port->x_char, port->membase + VT8500_TXFIFO); + port->icount.tx++; + port->x_char = 0; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + vt8500_stop_tx(port); + return; + } + + while ((vt8500_read(port, VT8500_URFIDX) & 0x1f) < 16) { + if (uart_circ_empty(xmit)) + break; + + writeb(xmit->buf[xmit->tail], port->membase + VT8500_TXFIFO); + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + vt8500_stop_tx(port); +} + +static void vt8500_start_tx(struct uart_port *port) +{ + struct vt8500_port *vt8500_port = container_of(port, + struct vt8500_port, + uart); + + vt8500_port->ier &= ~TX_FIFO_INTS; + vt8500_write(port, vt8500_port->ier, VT8500_URIER); + handle_tx(port); + vt8500_port->ier |= TX_FIFO_INTS; + vt8500_write(port, vt8500_port->ier, VT8500_URIER); +} + +static void handle_delta_cts(struct uart_port *port) +{ + port->icount.cts++; + wake_up_interruptible(&port->state->port.delta_msr_wait); +} + +static irqreturn_t vt8500_irq(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + unsigned long isr; + + spin_lock(&port->lock); + isr = vt8500_read(port, VT8500_URISR); + + /* Acknowledge active status bits */ + vt8500_write(port, isr, VT8500_URISR); + + if (isr & RX_FIFO_INTS) + handle_rx(port); + if (isr & TX_FIFO_INTS) + handle_tx(port); + if (isr & TCTS) + handle_delta_cts(port); + + spin_unlock(&port->lock); + + return IRQ_HANDLED; +} + +static unsigned int vt8500_tx_empty(struct uart_port *port) +{ + return (vt8500_read(port, VT8500_URFIDX) & 0x1f) < 16 ? + TIOCSER_TEMT : 0; +} + +static unsigned int vt8500_get_mctrl(struct uart_port *port) +{ + unsigned int usr; + + usr = vt8500_read(port, VT8500_URUSR); + if (usr & (1 << 4)) + return TIOCM_CTS; + else + return 0; +} + +static void vt8500_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + unsigned int lcr = vt8500_read(port, VT8500_URLCR); + + if (mctrl & TIOCM_RTS) + lcr |= VT8500_RTS; + else + lcr &= ~VT8500_RTS; + + vt8500_write(port, lcr, VT8500_URLCR); +} + +static void vt8500_break_ctl(struct uart_port *port, int break_ctl) +{ + if (break_ctl) + vt8500_write(port, + vt8500_read(port, VT8500_URLCR) | VT8500_BREAK, + VT8500_URLCR); +} + +static int vt8500_set_baud_rate(struct uart_port *port, unsigned int baud) +{ + struct vt8500_port *vt8500_port = + container_of(port, struct vt8500_port, uart); + unsigned long div; + unsigned int loops = 1000; + + div = ((vt8500_port->clk_predivisor - 1) & 0xf) << 16; + div |= (uart_get_divisor(port, baud) - 1) & 0x3ff; + + /* Effective baud rate */ + baud = port->uartclk / 16 / ((div & 0x3ff) + 1); + + while ((vt8500_read(port, VT8500_URUSR) & (1 << 5)) && --loops) + cpu_relax(); + + vt8500_write(port, div, VT8500_URDIV); + + /* Break signal timing depends on baud rate, update accordingly */ + vt8500_write(port, mult_frac(baud, 4096, 1000000), VT8500_URBKR); + + return baud; +} + +static int vt8500_startup(struct uart_port *port) +{ + struct vt8500_port *vt8500_port = + container_of(port, struct vt8500_port, uart); + int ret; + + snprintf(vt8500_port->name, sizeof(vt8500_port->name), + "vt8500_serial%d", port->line); + + ret = request_irq(port->irq, vt8500_irq, IRQF_TRIGGER_HIGH, + vt8500_port->name, port); + if (unlikely(ret)) + return ret; + + vt8500_write(port, 0x03, VT8500_URLCR); /* enable TX & RX */ + + return 0; +} + +static void vt8500_shutdown(struct uart_port *port) +{ + struct vt8500_port *vt8500_port = + container_of(port, struct vt8500_port, uart); + + vt8500_port->ier = 0; + + /* disable interrupts and FIFOs */ + vt8500_write(&vt8500_port->uart, 0, VT8500_URIER); + vt8500_write(&vt8500_port->uart, 0x880, VT8500_URFCR); + free_irq(port->irq, port); +} + +static void vt8500_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + struct vt8500_port *vt8500_port = + container_of(port, struct vt8500_port, uart); + unsigned long flags; + unsigned int baud, lcr; + unsigned int loops = 1000; + + spin_lock_irqsave(&port->lock, flags); + + /* calculate and set baud rate */ + baud = uart_get_baud_rate(port, termios, old, 900, 921600); + baud = vt8500_set_baud_rate(port, baud); + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, baud, baud); + + /* calculate parity */ + lcr = vt8500_read(&vt8500_port->uart, VT8500_URLCR); + lcr &= ~(VT8500_PARENB | VT8500_PARODD); + if (termios->c_cflag & PARENB) { + lcr |= VT8500_PARENB; + termios->c_cflag &= ~CMSPAR; + if (termios->c_cflag & PARODD) + lcr |= VT8500_PARODD; + } + + /* calculate bits per char */ + lcr &= ~VT8500_CS8; + switch (termios->c_cflag & CSIZE) { + case CS7: + break; + case CS8: + default: + lcr |= VT8500_CS8; + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= CS8; + break; + } + + /* calculate stop bits */ + lcr &= ~VT8500_CSTOPB; + if (termios->c_cflag & CSTOPB) + lcr |= VT8500_CSTOPB; + + lcr &= ~VT8500_SWRTSCTS; + if (vt8500_port->vt8500_uart_flags & VT8500_HAS_SWRTSCTS_SWITCH) + lcr |= VT8500_SWRTSCTS; + + /* set parity, bits per char, and stop bit */ + vt8500_write(&vt8500_port->uart, lcr, VT8500_URLCR); + + /* Configure status bits to ignore based on termio flags. */ + port->read_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->read_status_mask = FER | PER; + + uart_update_timeout(port, termios->c_cflag, baud); + + /* Reset FIFOs */ + vt8500_write(&vt8500_port->uart, 0x88c, VT8500_URFCR); + while ((vt8500_read(&vt8500_port->uart, VT8500_URFCR) & 0xc) + && --loops) + cpu_relax(); + + /* Every possible FIFO-related interrupt */ + vt8500_port->ier = RX_FIFO_INTS | TX_FIFO_INTS; + + /* + * CTS flow control + */ + if (UART_ENABLE_MS(&vt8500_port->uart, termios->c_cflag)) + vt8500_port->ier |= TCTS; + + vt8500_write(&vt8500_port->uart, 0x881, VT8500_URFCR); + vt8500_write(&vt8500_port->uart, vt8500_port->ier, VT8500_URIER); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *vt8500_type(struct uart_port *port) +{ + struct vt8500_port *vt8500_port = + container_of(port, struct vt8500_port, uart); + return vt8500_port->name; +} + +static void vt8500_release_port(struct uart_port *port) +{ +} + +static int vt8500_request_port(struct uart_port *port) +{ + return 0; +} + +static void vt8500_config_port(struct uart_port *port, int flags) +{ + port->type = PORT_VT8500; +} + +static int vt8500_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + if (unlikely(ser->type != PORT_UNKNOWN && ser->type != PORT_VT8500)) + return -EINVAL; + if (unlikely(port->irq != ser->irq)) + return -EINVAL; + return 0; +} + +static struct vt8500_port *vt8500_uart_ports[VT8500_MAX_PORTS]; +static struct uart_driver vt8500_uart_driver; + +#ifdef CONFIG_SERIAL_VT8500_CONSOLE + +static void wait_for_xmitr(struct uart_port *port) +{ + unsigned int status, tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + do { + status = vt8500_read(port, VT8500_URFIDX); + + if (--tmout == 0) + break; + udelay(1); + } while (status & 0x10); +} + +static void vt8500_console_putchar(struct uart_port *port, int c) +{ + wait_for_xmitr(port); + writeb(c, port->membase + VT8500_TXFIFO); +} + +static void vt8500_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct vt8500_port *vt8500_port = vt8500_uart_ports[co->index]; + unsigned long ier; + + BUG_ON(co->index < 0 || co->index >= vt8500_uart_driver.nr); + + ier = vt8500_read(&vt8500_port->uart, VT8500_URIER); + vt8500_write(&vt8500_port->uart, VT8500_URIER, 0); + + uart_console_write(&vt8500_port->uart, s, count, + vt8500_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and switch back to FIFO + */ + wait_for_xmitr(&vt8500_port->uart); + vt8500_write(&vt8500_port->uart, VT8500_URIER, ier); +} + +static int __init vt8500_console_setup(struct console *co, char *options) +{ + struct vt8500_port *vt8500_port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (unlikely(co->index >= vt8500_uart_driver.nr || co->index < 0)) + return -ENXIO; + + vt8500_port = vt8500_uart_ports[co->index]; + + if (!vt8500_port) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&vt8500_port->uart, + co, baud, parity, bits, flow); +} + +static struct console vt8500_console = { + .name = "ttyWMT", + .write = vt8500_console_write, + .device = uart_console_device, + .setup = vt8500_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &vt8500_uart_driver, +}; + +#define VT8500_CONSOLE (&vt8500_console) + +#else +#define VT8500_CONSOLE NULL +#endif + +#ifdef CONFIG_CONSOLE_POLL +static int vt8500_get_poll_char(struct uart_port *port) +{ + unsigned int status = vt8500_read(port, VT8500_URFIDX); + + if (!(status & 0x1f00)) + return NO_POLL_CHAR; + + return vt8500_read(port, VT8500_RXFIFO) & 0xff; +} + +static void vt8500_put_poll_char(struct uart_port *port, unsigned char c) +{ + unsigned int status, tmout = 10000; + + do { + status = vt8500_read(port, VT8500_URFIDX); + + if (--tmout == 0) + break; + udelay(1); + } while (status & 0x10); + + vt8500_write(port, c, VT8500_TXFIFO); +} +#endif + +static const struct uart_ops vt8500_uart_pops = { + .tx_empty = vt8500_tx_empty, + .set_mctrl = vt8500_set_mctrl, + .get_mctrl = vt8500_get_mctrl, + .stop_tx = vt8500_stop_tx, + .start_tx = vt8500_start_tx, + .stop_rx = vt8500_stop_rx, + .enable_ms = vt8500_enable_ms, + .break_ctl = vt8500_break_ctl, + .startup = vt8500_startup, + .shutdown = vt8500_shutdown, + .set_termios = vt8500_set_termios, + .type = vt8500_type, + .release_port = vt8500_release_port, + .request_port = vt8500_request_port, + .config_port = vt8500_config_port, + .verify_port = vt8500_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = vt8500_get_poll_char, + .poll_put_char = vt8500_put_poll_char, +#endif +}; + +static struct uart_driver vt8500_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "vt8500_serial", + .dev_name = "ttyWMT", + .nr = 6, + .cons = VT8500_CONSOLE, +}; + +static unsigned int vt8500_flags; /* none required so far */ +static unsigned int wm8880_flags = VT8500_HAS_SWRTSCTS_SWITCH; + +static const struct of_device_id wmt_dt_ids[] = { + { .compatible = "via,vt8500-uart", .data = &vt8500_flags}, + { .compatible = "wm,wm8880-uart", .data = &wm8880_flags}, + {} +}; + +static int vt8500_serial_probe(struct platform_device *pdev) +{ + struct vt8500_port *vt8500_port; + struct resource *mmres, *irqres; + struct device_node *np = pdev->dev.of_node; + const struct of_device_id *match; + const unsigned int *flags; + int ret; + int port; + + match = of_match_device(wmt_dt_ids, &pdev->dev); + if (!match) + return -EINVAL; + + flags = match->data; + + mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0); + irqres = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!mmres || !irqres) + return -ENODEV; + + if (np) { + port = of_alias_get_id(np, "serial"); + if (port >= VT8500_MAX_PORTS) + port = -1; + } else { + port = -1; + } + + if (port < 0) { + /* calculate the port id */ + port = find_first_zero_bit(vt8500_ports_in_use, + VT8500_MAX_PORTS); + } + + if (port >= VT8500_MAX_PORTS) + return -ENODEV; + + /* reserve the port id */ + if (test_and_set_bit(port, vt8500_ports_in_use)) { + /* port already in use - shouldn't really happen */ + return -EBUSY; + } + + vt8500_port = devm_kzalloc(&pdev->dev, sizeof(struct vt8500_port), + GFP_KERNEL); + if (!vt8500_port) + return -ENOMEM; + + vt8500_port->uart.membase = devm_ioremap_resource(&pdev->dev, mmres); + if (IS_ERR(vt8500_port->uart.membase)) + return PTR_ERR(vt8500_port->uart.membase); + + vt8500_port->clk = of_clk_get(pdev->dev.of_node, 0); + if (IS_ERR(vt8500_port->clk)) { + dev_err(&pdev->dev, "failed to get clock\n"); + return -EINVAL; + } + + ret = clk_prepare_enable(vt8500_port->clk); + if (ret) { + dev_err(&pdev->dev, "failed to enable clock\n"); + return ret; + } + + vt8500_port->vt8500_uart_flags = *flags; + vt8500_port->clk_predivisor = DIV_ROUND_CLOSEST( + clk_get_rate(vt8500_port->clk), + VT8500_RECOMMENDED_CLK + ); + vt8500_port->uart.type = PORT_VT8500; + vt8500_port->uart.iotype = UPIO_MEM; + vt8500_port->uart.mapbase = mmres->start; + vt8500_port->uart.irq = irqres->start; + vt8500_port->uart.fifosize = 16; + vt8500_port->uart.ops = &vt8500_uart_pops; + vt8500_port->uart.line = port; + vt8500_port->uart.dev = &pdev->dev; + vt8500_port->uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; + vt8500_port->uart.has_sysrq = IS_ENABLED(CONFIG_SERIAL_VT8500_CONSOLE); + + /* Serial core uses the magic "16" everywhere - adjust for it */ + vt8500_port->uart.uartclk = 16 * clk_get_rate(vt8500_port->clk) / + vt8500_port->clk_predivisor / + VT8500_OVERSAMPLING_DIVISOR; + + snprintf(vt8500_port->name, sizeof(vt8500_port->name), + "VT8500 UART%d", pdev->id); + + vt8500_uart_ports[port] = vt8500_port; + + uart_add_one_port(&vt8500_uart_driver, &vt8500_port->uart); + + platform_set_drvdata(pdev, vt8500_port); + + return 0; +} + +static struct platform_driver vt8500_platform_driver = { + .probe = vt8500_serial_probe, + .driver = { + .name = "vt8500_serial", + .of_match_table = wmt_dt_ids, + .suppress_bind_attrs = true, + }, +}; + +static int __init vt8500_serial_init(void) +{ + int ret; + + ret = uart_register_driver(&vt8500_uart_driver); + if (unlikely(ret)) + return ret; + + ret = platform_driver_register(&vt8500_platform_driver); + + if (unlikely(ret)) + uart_unregister_driver(&vt8500_uart_driver); + + return ret; +} +device_initcall(vt8500_serial_init); diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c new file mode 100644 index 000000000..f7dfa1239 --- /dev/null +++ b/drivers/tty/serial/xilinx_uartps.c @@ -0,0 +1,1697 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Cadence UART driver (found in Xilinx Zynq) + * + * 2011 - 2014 (C) Xilinx Inc. + * + * This driver has originally been pushed by Xilinx using a Zynq-branding. This + * still shows in the naming of this file, the kconfig symbols and some symbols + * in the code. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define CDNS_UART_TTY_NAME "ttyPS" +#define CDNS_UART_NAME "xuartps" +#define CDNS_UART_MAJOR 0 /* use dynamic node allocation */ +#define CDNS_UART_MINOR 0 /* works best with devtmpfs */ +#define CDNS_UART_NR_PORTS 16 +#define CDNS_UART_FIFO_SIZE 64 /* FIFO size */ +#define CDNS_UART_REGISTER_SPACE 0x1000 +#define TX_TIMEOUT 500000 + +/* Rx Trigger level */ +static int rx_trigger_level = 56; +module_param(rx_trigger_level, uint, 0444); +MODULE_PARM_DESC(rx_trigger_level, "Rx trigger level, 1-63 bytes"); + +/* Rx Timeout */ +static int rx_timeout = 10; +module_param(rx_timeout, uint, 0444); +MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255"); + +/* Register offsets for the UART. */ +#define CDNS_UART_CR 0x00 /* Control Register */ +#define CDNS_UART_MR 0x04 /* Mode Register */ +#define CDNS_UART_IER 0x08 /* Interrupt Enable */ +#define CDNS_UART_IDR 0x0C /* Interrupt Disable */ +#define CDNS_UART_IMR 0x10 /* Interrupt Mask */ +#define CDNS_UART_ISR 0x14 /* Interrupt Status */ +#define CDNS_UART_BAUDGEN 0x18 /* Baud Rate Generator */ +#define CDNS_UART_RXTOUT 0x1C /* RX Timeout */ +#define CDNS_UART_RXWM 0x20 /* RX FIFO Trigger Level */ +#define CDNS_UART_MODEMCR 0x24 /* Modem Control */ +#define CDNS_UART_MODEMSR 0x28 /* Modem Status */ +#define CDNS_UART_SR 0x2C /* Channel Status */ +#define CDNS_UART_FIFO 0x30 /* FIFO */ +#define CDNS_UART_BAUDDIV 0x34 /* Baud Rate Divider */ +#define CDNS_UART_FLOWDEL 0x38 /* Flow Delay */ +#define CDNS_UART_IRRX_PWIDTH 0x3C /* IR Min Received Pulse Width */ +#define CDNS_UART_IRTX_PWIDTH 0x40 /* IR Transmitted pulse Width */ +#define CDNS_UART_TXWM 0x44 /* TX FIFO Trigger Level */ +#define CDNS_UART_RXBS 0x48 /* RX FIFO byte status register */ + +/* Control Register Bit Definitions */ +#define CDNS_UART_CR_STOPBRK 0x00000100 /* Stop TX break */ +#define CDNS_UART_CR_STARTBRK 0x00000080 /* Set TX break */ +#define CDNS_UART_CR_TX_DIS 0x00000020 /* TX disabled. */ +#define CDNS_UART_CR_TX_EN 0x00000010 /* TX enabled */ +#define CDNS_UART_CR_RX_DIS 0x00000008 /* RX disabled. */ +#define CDNS_UART_CR_RX_EN 0x00000004 /* RX enabled */ +#define CDNS_UART_CR_TXRST 0x00000002 /* TX logic reset */ +#define CDNS_UART_CR_RXRST 0x00000001 /* RX logic reset */ +#define CDNS_UART_CR_RST_TO 0x00000040 /* Restart Timeout Counter */ +#define CDNS_UART_RXBS_PARITY 0x00000001 /* Parity error status */ +#define CDNS_UART_RXBS_FRAMING 0x00000002 /* Framing error status */ +#define CDNS_UART_RXBS_BRK 0x00000004 /* Overrun error status */ + +/* + * Mode Register: + * The mode register (MR) defines the mode of transfer as well as the data + * format. If this register is modified during transmission or reception, + * data validity cannot be guaranteed. + */ +#define CDNS_UART_MR_CLKSEL 0x00000001 /* Pre-scalar selection */ +#define CDNS_UART_MR_CHMODE_L_LOOP 0x00000200 /* Local loop back mode */ +#define CDNS_UART_MR_CHMODE_NORM 0x00000000 /* Normal mode */ +#define CDNS_UART_MR_CHMODE_MASK 0x00000300 /* Mask for mode bits */ + +#define CDNS_UART_MR_STOPMODE_2_BIT 0x00000080 /* 2 stop bits */ +#define CDNS_UART_MR_STOPMODE_1_BIT 0x00000000 /* 1 stop bit */ + +#define CDNS_UART_MR_PARITY_NONE 0x00000020 /* No parity mode */ +#define CDNS_UART_MR_PARITY_MARK 0x00000018 /* Mark parity mode */ +#define CDNS_UART_MR_PARITY_SPACE 0x00000010 /* Space parity mode */ +#define CDNS_UART_MR_PARITY_ODD 0x00000008 /* Odd parity mode */ +#define CDNS_UART_MR_PARITY_EVEN 0x00000000 /* Even parity mode */ + +#define CDNS_UART_MR_CHARLEN_6_BIT 0x00000006 /* 6 bits data */ +#define CDNS_UART_MR_CHARLEN_7_BIT 0x00000004 /* 7 bits data */ +#define CDNS_UART_MR_CHARLEN_8_BIT 0x00000000 /* 8 bits data */ + +/* + * Interrupt Registers: + * Interrupt control logic uses the interrupt enable register (IER) and the + * interrupt disable register (IDR) to set the value of the bits in the + * interrupt mask register (IMR). The IMR determines whether to pass an + * interrupt to the interrupt status register (ISR). + * Writing a 1 to IER Enables an interrupt, writing a 1 to IDR disables an + * interrupt. IMR and ISR are read only, and IER and IDR are write only. + * Reading either IER or IDR returns 0x00. + * All four registers have the same bit definitions. + */ +#define CDNS_UART_IXR_TOUT 0x00000100 /* RX Timeout error interrupt */ +#define CDNS_UART_IXR_PARITY 0x00000080 /* Parity error interrupt */ +#define CDNS_UART_IXR_FRAMING 0x00000040 /* Framing error interrupt */ +#define CDNS_UART_IXR_OVERRUN 0x00000020 /* Overrun error interrupt */ +#define CDNS_UART_IXR_TXFULL 0x00000010 /* TX FIFO Full interrupt */ +#define CDNS_UART_IXR_TXEMPTY 0x00000008 /* TX FIFO empty interrupt */ +#define CDNS_UART_ISR_RXEMPTY 0x00000002 /* RX FIFO empty interrupt */ +#define CDNS_UART_IXR_RXTRIG 0x00000001 /* RX FIFO trigger interrupt */ +#define CDNS_UART_IXR_RXFULL 0x00000004 /* RX FIFO full interrupt. */ +#define CDNS_UART_IXR_RXEMPTY 0x00000002 /* RX FIFO empty interrupt. */ +#define CDNS_UART_IXR_RXMASK 0x000021e7 /* Valid RX bit mask */ + + /* + * Do not enable parity error interrupt for the following + * reason: When parity error interrupt is enabled, each Rx + * parity error always results in 2 events. The first one + * being parity error interrupt and the second one with a + * proper Rx interrupt with the incoming data. Disabling + * parity error interrupt ensures better handling of parity + * error events. With this change, for a parity error case, we + * get a Rx interrupt with parity error set in ISR register + * and we still handle parity errors in the desired way. + */ + +#define CDNS_UART_RX_IRQS (CDNS_UART_IXR_FRAMING | \ + CDNS_UART_IXR_OVERRUN | \ + CDNS_UART_IXR_RXTRIG | \ + CDNS_UART_IXR_TOUT) + +/* Goes in read_status_mask for break detection as the HW doesn't do it*/ +#define CDNS_UART_IXR_BRK 0x00002000 + +#define CDNS_UART_RXBS_SUPPORT BIT(1) +/* + * Modem Control register: + * The read/write Modem Control register controls the interface with the modem + * or data set, or a peripheral device emulating a modem. + */ +#define CDNS_UART_MODEMCR_FCM 0x00000020 /* Automatic flow control mode */ +#define CDNS_UART_MODEMCR_RTS 0x00000002 /* Request to send output control */ +#define CDNS_UART_MODEMCR_DTR 0x00000001 /* Data Terminal Ready */ + +/* + * Modem Status register: + * The read/write Modem Status register reports the interface with the modem + * or data set, or a peripheral device emulating a modem. + */ +#define CDNS_UART_MODEMSR_DCD BIT(7) /* Data Carrier Detect */ +#define CDNS_UART_MODEMSR_RI BIT(6) /* Ting Indicator */ +#define CDNS_UART_MODEMSR_DSR BIT(5) /* Data Set Ready */ +#define CDNS_UART_MODEMSR_CTS BIT(4) /* Clear To Send */ + +/* + * Channel Status Register: + * The channel status register (CSR) is provided to enable the control logic + * to monitor the status of bits in the channel interrupt status register, + * even if these are masked out by the interrupt mask register. + */ +#define CDNS_UART_SR_RXEMPTY 0x00000002 /* RX FIFO empty */ +#define CDNS_UART_SR_TXEMPTY 0x00000008 /* TX FIFO empty */ +#define CDNS_UART_SR_TXFULL 0x00000010 /* TX FIFO full */ +#define CDNS_UART_SR_RXTRIG 0x00000001 /* Rx Trigger */ +#define CDNS_UART_SR_TACTIVE 0x00000800 /* TX state machine active */ + +/* baud dividers min/max values */ +#define CDNS_UART_BDIV_MIN 4 +#define CDNS_UART_BDIV_MAX 255 +#define CDNS_UART_CD_MAX 65535 +#define UART_AUTOSUSPEND_TIMEOUT 3000 + +/** + * struct cdns_uart - device data + * @port: Pointer to the UART port + * @uartclk: Reference clock + * @pclk: APB clock + * @cdns_uart_driver: Pointer to UART driver + * @baud: Current baud rate + * @clk_rate_change_nb: Notifier block for clock changes + * @quirks: Flags for RXBS support. + */ +struct cdns_uart { + struct uart_port *port; + struct clk *uartclk; + struct clk *pclk; + struct uart_driver *cdns_uart_driver; + unsigned int baud; + struct notifier_block clk_rate_change_nb; + u32 quirks; + bool cts_override; +}; +struct cdns_platform_data { + u32 quirks; +}; +#define to_cdns_uart(_nb) container_of(_nb, struct cdns_uart, \ + clk_rate_change_nb) + +/** + * cdns_uart_handle_rx - Handle the received bytes along with Rx errors. + * @dev_id: Id of the UART port + * @isrstatus: The interrupt status register value as read + * Return: None + */ +static void cdns_uart_handle_rx(void *dev_id, unsigned int isrstatus) +{ + struct uart_port *port = (struct uart_port *)dev_id; + struct cdns_uart *cdns_uart = port->private_data; + unsigned int data; + unsigned int rxbs_status = 0; + unsigned int status_mask; + unsigned int framerrprocessed = 0; + char status = TTY_NORMAL; + bool is_rxbs_support; + + is_rxbs_support = cdns_uart->quirks & CDNS_UART_RXBS_SUPPORT; + + while ((readl(port->membase + CDNS_UART_SR) & + CDNS_UART_SR_RXEMPTY) != CDNS_UART_SR_RXEMPTY) { + if (is_rxbs_support) + rxbs_status = readl(port->membase + CDNS_UART_RXBS); + data = readl(port->membase + CDNS_UART_FIFO); + port->icount.rx++; + /* + * There is no hardware break detection in Zynq, so we interpret + * framing error with all-zeros data as a break sequence. + * Most of the time, there's another non-zero byte at the + * end of the sequence. + */ + if (!is_rxbs_support && (isrstatus & CDNS_UART_IXR_FRAMING)) { + if (!data) { + port->read_status_mask |= CDNS_UART_IXR_BRK; + framerrprocessed = 1; + continue; + } + } + if (is_rxbs_support && (rxbs_status & CDNS_UART_RXBS_BRK)) { + port->icount.brk++; + status = TTY_BREAK; + if (uart_handle_break(port)) + continue; + } + + isrstatus &= port->read_status_mask; + isrstatus &= ~port->ignore_status_mask; + status_mask = port->read_status_mask; + status_mask &= ~port->ignore_status_mask; + + if (data && + (port->read_status_mask & CDNS_UART_IXR_BRK)) { + port->read_status_mask &= ~CDNS_UART_IXR_BRK; + port->icount.brk++; + if (uart_handle_break(port)) + continue; + } + + if (uart_handle_sysrq_char(port, data)) + continue; + + if (is_rxbs_support) { + if ((rxbs_status & CDNS_UART_RXBS_PARITY) + && (status_mask & CDNS_UART_IXR_PARITY)) { + port->icount.parity++; + status = TTY_PARITY; + } + if ((rxbs_status & CDNS_UART_RXBS_FRAMING) + && (status_mask & CDNS_UART_IXR_PARITY)) { + port->icount.frame++; + status = TTY_FRAME; + } + } else { + if (isrstatus & CDNS_UART_IXR_PARITY) { + port->icount.parity++; + status = TTY_PARITY; + } + if ((isrstatus & CDNS_UART_IXR_FRAMING) && + !framerrprocessed) { + port->icount.frame++; + status = TTY_FRAME; + } + } + if (isrstatus & CDNS_UART_IXR_OVERRUN) { + port->icount.overrun++; + tty_insert_flip_char(&port->state->port, 0, + TTY_OVERRUN); + } + tty_insert_flip_char(&port->state->port, data, status); + isrstatus = 0; + } + spin_unlock(&port->lock); + tty_flip_buffer_push(&port->state->port); + spin_lock(&port->lock); +} + +/** + * cdns_uart_handle_tx - Handle the bytes to be Txed. + * @dev_id: Id of the UART port + * Return: None + */ +static void cdns_uart_handle_tx(void *dev_id) +{ + struct uart_port *port = (struct uart_port *)dev_id; + unsigned int numbytes; + + if (uart_circ_empty(&port->state->xmit)) { + writel(CDNS_UART_IXR_TXEMPTY, port->membase + CDNS_UART_IDR); + } else { + numbytes = port->fifosize; + while (numbytes && !uart_circ_empty(&port->state->xmit) && + !(readl(port->membase + CDNS_UART_SR) & + CDNS_UART_SR_TXFULL)) { + /* + * Get the data from the UART circular buffer + * and write it to the cdns_uart's TX_FIFO + * register. + */ + writel( + port->state->xmit.buf[port->state->xmit.tail], + port->membase + CDNS_UART_FIFO); + + port->icount.tx++; + + /* + * Adjust the tail of the UART buffer and wrap + * the buffer if it reaches limit. + */ + port->state->xmit.tail = + (port->state->xmit.tail + 1) & + (UART_XMIT_SIZE - 1); + + numbytes--; + } + + if (uart_circ_chars_pending( + &port->state->xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + } +} + +/** + * cdns_uart_isr - Interrupt handler + * @irq: Irq number + * @dev_id: Id of the port + * + * Return: IRQHANDLED + */ +static irqreturn_t cdns_uart_isr(int irq, void *dev_id) +{ + struct uart_port *port = (struct uart_port *)dev_id; + unsigned int isrstatus; + + spin_lock(&port->lock); + + /* Read the interrupt status register to determine which + * interrupt(s) is/are active and clear them. + */ + isrstatus = readl(port->membase + CDNS_UART_ISR); + writel(isrstatus, port->membase + CDNS_UART_ISR); + + if (isrstatus & CDNS_UART_IXR_TXEMPTY) { + cdns_uart_handle_tx(dev_id); + isrstatus &= ~CDNS_UART_IXR_TXEMPTY; + } + + isrstatus &= port->read_status_mask; + isrstatus &= ~port->ignore_status_mask; + /* + * Skip RX processing if RX is disabled as RXEMPTY will never be set + * as read bytes will not be removed from the FIFO. + */ + if (isrstatus & CDNS_UART_IXR_RXMASK && + !(readl(port->membase + CDNS_UART_CR) & CDNS_UART_CR_RX_DIS)) + cdns_uart_handle_rx(dev_id, isrstatus); + + spin_unlock(&port->lock); + return IRQ_HANDLED; +} + +/** + * cdns_uart_calc_baud_divs - Calculate baud rate divisors + * @clk: UART module input clock + * @baud: Desired baud rate + * @rbdiv: BDIV value (return value) + * @rcd: CD value (return value) + * @div8: Value for clk_sel bit in mod (return value) + * Return: baud rate, requested baud when possible, or actual baud when there + * was too much error, zero if no valid divisors are found. + * + * Formula to obtain baud rate is + * baud_tx/rx rate = clk/CD * (BDIV + 1) + * input_clk = (Uart User Defined Clock or Apb Clock) + * depends on UCLKEN in MR Reg + * clk = input_clk or input_clk/8; + * depends on CLKS in MR reg + * CD and BDIV depends on values in + * baud rate generate register + * baud rate clock divisor register + */ +static unsigned int cdns_uart_calc_baud_divs(unsigned int clk, + unsigned int baud, u32 *rbdiv, u32 *rcd, int *div8) +{ + u32 cd, bdiv; + unsigned int calc_baud; + unsigned int bestbaud = 0; + unsigned int bauderror; + unsigned int besterror = ~0; + + if (baud < clk / ((CDNS_UART_BDIV_MAX + 1) * CDNS_UART_CD_MAX)) { + *div8 = 1; + clk /= 8; + } else { + *div8 = 0; + } + + for (bdiv = CDNS_UART_BDIV_MIN; bdiv <= CDNS_UART_BDIV_MAX; bdiv++) { + cd = DIV_ROUND_CLOSEST(clk, baud * (bdiv + 1)); + if (cd < 1 || cd > CDNS_UART_CD_MAX) + continue; + + calc_baud = clk / (cd * (bdiv + 1)); + + if (baud > calc_baud) + bauderror = baud - calc_baud; + else + bauderror = calc_baud - baud; + + if (besterror > bauderror) { + *rbdiv = bdiv; + *rcd = cd; + bestbaud = calc_baud; + besterror = bauderror; + } + } + /* use the values when percent error is acceptable */ + if (((besterror * 100) / baud) < 3) + bestbaud = baud; + + return bestbaud; +} + +/** + * cdns_uart_set_baud_rate - Calculate and set the baud rate + * @port: Handle to the uart port structure + * @baud: Baud rate to set + * Return: baud rate, requested baud when possible, or actual baud when there + * was too much error, zero if no valid divisors are found. + */ +static unsigned int cdns_uart_set_baud_rate(struct uart_port *port, + unsigned int baud) +{ + unsigned int calc_baud; + u32 cd = 0, bdiv = 0; + u32 mreg; + int div8; + struct cdns_uart *cdns_uart = port->private_data; + + calc_baud = cdns_uart_calc_baud_divs(port->uartclk, baud, &bdiv, &cd, + &div8); + + /* Write new divisors to hardware */ + mreg = readl(port->membase + CDNS_UART_MR); + if (div8) + mreg |= CDNS_UART_MR_CLKSEL; + else + mreg &= ~CDNS_UART_MR_CLKSEL; + writel(mreg, port->membase + CDNS_UART_MR); + writel(cd, port->membase + CDNS_UART_BAUDGEN); + writel(bdiv, port->membase + CDNS_UART_BAUDDIV); + cdns_uart->baud = baud; + + return calc_baud; +} + +#ifdef CONFIG_COMMON_CLK +/** + * cdns_uart_clk_notitifer_cb - Clock notifier callback + * @nb: Notifier block + * @event: Notify event + * @data: Notifier data + * Return: NOTIFY_OK or NOTIFY_DONE on success, NOTIFY_BAD on error. + */ +static int cdns_uart_clk_notifier_cb(struct notifier_block *nb, + unsigned long event, void *data) +{ + u32 ctrl_reg; + struct uart_port *port; + int locked = 0; + struct clk_notifier_data *ndata = data; + unsigned long flags = 0; + struct cdns_uart *cdns_uart = to_cdns_uart(nb); + + port = cdns_uart->port; + if (port->suspended) + return NOTIFY_OK; + + switch (event) { + case PRE_RATE_CHANGE: + { + u32 bdiv, cd; + int div8; + + /* + * Find out if current baud-rate can be achieved with new clock + * frequency. + */ + if (!cdns_uart_calc_baud_divs(ndata->new_rate, cdns_uart->baud, + &bdiv, &cd, &div8)) { + dev_warn(port->dev, "clock rate change rejected\n"); + return NOTIFY_BAD; + } + + spin_lock_irqsave(&cdns_uart->port->lock, flags); + + /* Disable the TX and RX to set baud rate */ + ctrl_reg = readl(port->membase + CDNS_UART_CR); + ctrl_reg |= CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS; + writel(ctrl_reg, port->membase + CDNS_UART_CR); + + spin_unlock_irqrestore(&cdns_uart->port->lock, flags); + + return NOTIFY_OK; + } + case POST_RATE_CHANGE: + /* + * Set clk dividers to generate correct baud with new clock + * frequency. + */ + + spin_lock_irqsave(&cdns_uart->port->lock, flags); + + locked = 1; + port->uartclk = ndata->new_rate; + + cdns_uart->baud = cdns_uart_set_baud_rate(cdns_uart->port, + cdns_uart->baud); + fallthrough; + case ABORT_RATE_CHANGE: + if (!locked) + spin_lock_irqsave(&cdns_uart->port->lock, flags); + + /* Set TX/RX Reset */ + ctrl_reg = readl(port->membase + CDNS_UART_CR); + ctrl_reg |= CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST; + writel(ctrl_reg, port->membase + CDNS_UART_CR); + + while (readl(port->membase + CDNS_UART_CR) & + (CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST)) + cpu_relax(); + + /* + * Clear the RX disable and TX disable bits and then set the TX + * enable bit and RX enable bit to enable the transmitter and + * receiver. + */ + writel(rx_timeout, port->membase + CDNS_UART_RXTOUT); + ctrl_reg = readl(port->membase + CDNS_UART_CR); + ctrl_reg &= ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS); + ctrl_reg |= CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN; + writel(ctrl_reg, port->membase + CDNS_UART_CR); + + spin_unlock_irqrestore(&cdns_uart->port->lock, flags); + + return NOTIFY_OK; + default: + return NOTIFY_DONE; + } +} +#endif + +/** + * cdns_uart_start_tx - Start transmitting bytes + * @port: Handle to the uart port structure + */ +static void cdns_uart_start_tx(struct uart_port *port) +{ + unsigned int status; + + if (uart_tx_stopped(port)) + return; + + /* + * Set the TX enable bit and clear the TX disable bit to enable the + * transmitter. + */ + status = readl(port->membase + CDNS_UART_CR); + status &= ~CDNS_UART_CR_TX_DIS; + status |= CDNS_UART_CR_TX_EN; + writel(status, port->membase + CDNS_UART_CR); + + if (uart_circ_empty(&port->state->xmit)) + return; + + writel(CDNS_UART_IXR_TXEMPTY, port->membase + CDNS_UART_ISR); + + cdns_uart_handle_tx(port); + + /* Enable the TX Empty interrupt */ + writel(CDNS_UART_IXR_TXEMPTY, port->membase + CDNS_UART_IER); +} + +/** + * cdns_uart_stop_tx - Stop TX + * @port: Handle to the uart port structure + */ +static void cdns_uart_stop_tx(struct uart_port *port) +{ + unsigned int regval; + + regval = readl(port->membase + CDNS_UART_CR); + regval |= CDNS_UART_CR_TX_DIS; + /* Disable the transmitter */ + writel(regval, port->membase + CDNS_UART_CR); +} + +/** + * cdns_uart_stop_rx - Stop RX + * @port: Handle to the uart port structure + */ +static void cdns_uart_stop_rx(struct uart_port *port) +{ + unsigned int regval; + + /* Disable RX IRQs */ + writel(CDNS_UART_RX_IRQS, port->membase + CDNS_UART_IDR); + + /* Disable the receiver */ + regval = readl(port->membase + CDNS_UART_CR); + regval |= CDNS_UART_CR_RX_DIS; + writel(regval, port->membase + CDNS_UART_CR); +} + +/** + * cdns_uart_tx_empty - Check whether TX is empty + * @port: Handle to the uart port structure + * + * Return: TIOCSER_TEMT on success, 0 otherwise + */ +static unsigned int cdns_uart_tx_empty(struct uart_port *port) +{ + unsigned int status; + + status = readl(port->membase + CDNS_UART_SR) & + (CDNS_UART_SR_TXEMPTY | CDNS_UART_SR_TACTIVE); + return (status == CDNS_UART_SR_TXEMPTY) ? TIOCSER_TEMT : 0; +} + +/** + * cdns_uart_break_ctl - Based on the input ctl we have to start or stop + * transmitting char breaks + * @port: Handle to the uart port structure + * @ctl: Value based on which start or stop decision is taken + */ +static void cdns_uart_break_ctl(struct uart_port *port, int ctl) +{ + unsigned int status; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + status = readl(port->membase + CDNS_UART_CR); + + if (ctl == -1) + writel(CDNS_UART_CR_STARTBRK | status, + port->membase + CDNS_UART_CR); + else { + if ((status & CDNS_UART_CR_STOPBRK) == 0) + writel(CDNS_UART_CR_STOPBRK | status, + port->membase + CDNS_UART_CR); + } + spin_unlock_irqrestore(&port->lock, flags); +} + +/** + * cdns_uart_set_termios - termios operations, handling data length, parity, + * stop bits, flow control, baud rate + * @port: Handle to the uart port structure + * @termios: Handle to the input termios structure + * @old: Values of the previously saved termios structure + */ +static void cdns_uart_set_termios(struct uart_port *port, + struct ktermios *termios, struct ktermios *old) +{ + u32 cval = 0; + unsigned int baud, minbaud, maxbaud; + unsigned long flags; + unsigned int ctrl_reg, mode_reg; + + spin_lock_irqsave(&port->lock, flags); + + /* Disable the TX and RX to set baud rate */ + ctrl_reg = readl(port->membase + CDNS_UART_CR); + ctrl_reg |= CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS; + writel(ctrl_reg, port->membase + CDNS_UART_CR); + + /* + * Min baud rate = 6bps and Max Baud Rate is 10Mbps for 100Mhz clk + * min and max baud should be calculated here based on port->uartclk. + * this way we get a valid baud and can safely call set_baud() + */ + minbaud = port->uartclk / + ((CDNS_UART_BDIV_MAX + 1) * CDNS_UART_CD_MAX * 8); + maxbaud = port->uartclk / (CDNS_UART_BDIV_MIN + 1); + baud = uart_get_baud_rate(port, termios, old, minbaud, maxbaud); + baud = cdns_uart_set_baud_rate(port, baud); + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, baud, baud); + + /* Update the per-port timeout. */ + uart_update_timeout(port, termios->c_cflag, baud); + + /* Set TX/RX Reset */ + ctrl_reg = readl(port->membase + CDNS_UART_CR); + ctrl_reg |= CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST; + writel(ctrl_reg, port->membase + CDNS_UART_CR); + + while (readl(port->membase + CDNS_UART_CR) & + (CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST)) + cpu_relax(); + + /* + * Clear the RX disable and TX disable bits and then set the TX enable + * bit and RX enable bit to enable the transmitter and receiver. + */ + ctrl_reg = readl(port->membase + CDNS_UART_CR); + ctrl_reg &= ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS); + ctrl_reg |= CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN; + writel(ctrl_reg, port->membase + CDNS_UART_CR); + + writel(rx_timeout, port->membase + CDNS_UART_RXTOUT); + + port->read_status_mask = CDNS_UART_IXR_TXEMPTY | CDNS_UART_IXR_RXTRIG | + CDNS_UART_IXR_OVERRUN | CDNS_UART_IXR_TOUT; + port->ignore_status_mask = 0; + + if (termios->c_iflag & INPCK) + port->read_status_mask |= CDNS_UART_IXR_PARITY | + CDNS_UART_IXR_FRAMING; + + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= CDNS_UART_IXR_PARITY | + CDNS_UART_IXR_FRAMING | CDNS_UART_IXR_OVERRUN; + + /* ignore all characters if CREAD is not set */ + if ((termios->c_cflag & CREAD) == 0) + port->ignore_status_mask |= CDNS_UART_IXR_RXTRIG | + CDNS_UART_IXR_TOUT | CDNS_UART_IXR_PARITY | + CDNS_UART_IXR_FRAMING | CDNS_UART_IXR_OVERRUN; + + mode_reg = readl(port->membase + CDNS_UART_MR); + + /* Handling Data Size */ + switch (termios->c_cflag & CSIZE) { + case CS6: + cval |= CDNS_UART_MR_CHARLEN_6_BIT; + break; + case CS7: + cval |= CDNS_UART_MR_CHARLEN_7_BIT; + break; + default: + case CS8: + cval |= CDNS_UART_MR_CHARLEN_8_BIT; + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= CS8; + break; + } + + /* Handling Parity and Stop Bits length */ + if (termios->c_cflag & CSTOPB) + cval |= CDNS_UART_MR_STOPMODE_2_BIT; /* 2 STOP bits */ + else + cval |= CDNS_UART_MR_STOPMODE_1_BIT; /* 1 STOP bit */ + + if (termios->c_cflag & PARENB) { + /* Mark or Space parity */ + if (termios->c_cflag & CMSPAR) { + if (termios->c_cflag & PARODD) + cval |= CDNS_UART_MR_PARITY_MARK; + else + cval |= CDNS_UART_MR_PARITY_SPACE; + } else { + if (termios->c_cflag & PARODD) + cval |= CDNS_UART_MR_PARITY_ODD; + else + cval |= CDNS_UART_MR_PARITY_EVEN; + } + } else { + cval |= CDNS_UART_MR_PARITY_NONE; + } + cval |= mode_reg & 1; + writel(cval, port->membase + CDNS_UART_MR); + + cval = readl(port->membase + CDNS_UART_MODEMCR); + if (termios->c_cflag & CRTSCTS) + cval |= CDNS_UART_MODEMCR_FCM; + else + cval &= ~CDNS_UART_MODEMCR_FCM; + writel(cval, port->membase + CDNS_UART_MODEMCR); + + spin_unlock_irqrestore(&port->lock, flags); +} + +/** + * cdns_uart_startup - Called when an application opens a cdns_uart port + * @port: Handle to the uart port structure + * + * Return: 0 on success, negative errno otherwise + */ +static int cdns_uart_startup(struct uart_port *port) +{ + struct cdns_uart *cdns_uart = port->private_data; + bool is_brk_support; + int ret; + unsigned long flags; + unsigned int status = 0; + + is_brk_support = cdns_uart->quirks & CDNS_UART_RXBS_SUPPORT; + + spin_lock_irqsave(&port->lock, flags); + + /* Disable the TX and RX */ + writel(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS, + port->membase + CDNS_UART_CR); + + /* Set the Control Register with TX/RX Enable, TX/RX Reset, + * no break chars. + */ + writel(CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST, + port->membase + CDNS_UART_CR); + + while (readl(port->membase + CDNS_UART_CR) & + (CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST)) + cpu_relax(); + + /* + * Clear the RX disable bit and then set the RX enable bit to enable + * the receiver. + */ + status = readl(port->membase + CDNS_UART_CR); + status &= ~CDNS_UART_CR_RX_DIS; + status |= CDNS_UART_CR_RX_EN; + writel(status, port->membase + CDNS_UART_CR); + + /* Set the Mode Register with normal mode,8 data bits,1 stop bit, + * no parity. + */ + writel(CDNS_UART_MR_CHMODE_NORM | CDNS_UART_MR_STOPMODE_1_BIT + | CDNS_UART_MR_PARITY_NONE | CDNS_UART_MR_CHARLEN_8_BIT, + port->membase + CDNS_UART_MR); + + /* + * Set the RX FIFO Trigger level to use most of the FIFO, but it + * can be tuned with a module parameter + */ + writel(rx_trigger_level, port->membase + CDNS_UART_RXWM); + + /* + * Receive Timeout register is enabled but it + * can be tuned with a module parameter + */ + writel(rx_timeout, port->membase + CDNS_UART_RXTOUT); + + /* Clear out any pending interrupts before enabling them */ + writel(readl(port->membase + CDNS_UART_ISR), + port->membase + CDNS_UART_ISR); + + spin_unlock_irqrestore(&port->lock, flags); + + ret = request_irq(port->irq, cdns_uart_isr, 0, CDNS_UART_NAME, port); + if (ret) { + dev_err(port->dev, "request_irq '%d' failed with %d\n", + port->irq, ret); + return ret; + } + + /* Set the Interrupt Registers with desired interrupts */ + if (is_brk_support) + writel(CDNS_UART_RX_IRQS | CDNS_UART_IXR_BRK, + port->membase + CDNS_UART_IER); + else + writel(CDNS_UART_RX_IRQS, port->membase + CDNS_UART_IER); + + return 0; +} + +/** + * cdns_uart_shutdown - Called when an application closes a cdns_uart port + * @port: Handle to the uart port structure + */ +static void cdns_uart_shutdown(struct uart_port *port) +{ + int status; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + /* Disable interrupts */ + status = readl(port->membase + CDNS_UART_IMR); + writel(status, port->membase + CDNS_UART_IDR); + writel(0xffffffff, port->membase + CDNS_UART_ISR); + + /* Disable the TX and RX */ + writel(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS, + port->membase + CDNS_UART_CR); + + spin_unlock_irqrestore(&port->lock, flags); + + free_irq(port->irq, port); +} + +/** + * cdns_uart_type - Set UART type to cdns_uart port + * @port: Handle to the uart port structure + * + * Return: string on success, NULL otherwise + */ +static const char *cdns_uart_type(struct uart_port *port) +{ + return port->type == PORT_XUARTPS ? CDNS_UART_NAME : NULL; +} + +/** + * cdns_uart_verify_port - Verify the port params + * @port: Handle to the uart port structure + * @ser: Handle to the structure whose members are compared + * + * Return: 0 on success, negative errno otherwise. + */ +static int cdns_uart_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + if (ser->type != PORT_UNKNOWN && ser->type != PORT_XUARTPS) + return -EINVAL; + if (port->irq != ser->irq) + return -EINVAL; + if (ser->io_type != UPIO_MEM) + return -EINVAL; + if (port->iobase != ser->port) + return -EINVAL; + if (ser->hub6 != 0) + return -EINVAL; + return 0; +} + +/** + * cdns_uart_request_port - Claim the memory region attached to cdns_uart port, + * called when the driver adds a cdns_uart port via + * uart_add_one_port() + * @port: Handle to the uart port structure + * + * Return: 0 on success, negative errno otherwise. + */ +static int cdns_uart_request_port(struct uart_port *port) +{ + if (!request_mem_region(port->mapbase, CDNS_UART_REGISTER_SPACE, + CDNS_UART_NAME)) { + return -ENOMEM; + } + + port->membase = ioremap(port->mapbase, CDNS_UART_REGISTER_SPACE); + if (!port->membase) { + dev_err(port->dev, "Unable to map registers\n"); + release_mem_region(port->mapbase, CDNS_UART_REGISTER_SPACE); + return -ENOMEM; + } + return 0; +} + +/** + * cdns_uart_release_port - Release UART port + * @port: Handle to the uart port structure + * + * Release the memory region attached to a cdns_uart port. Called when the + * driver removes a cdns_uart port via uart_remove_one_port(). + */ +static void cdns_uart_release_port(struct uart_port *port) +{ + release_mem_region(port->mapbase, CDNS_UART_REGISTER_SPACE); + iounmap(port->membase); + port->membase = NULL; +} + +/** + * cdns_uart_config_port - Configure UART port + * @port: Handle to the uart port structure + * @flags: If any + */ +static void cdns_uart_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE && cdns_uart_request_port(port) == 0) + port->type = PORT_XUARTPS; +} + +/** + * cdns_uart_get_mctrl - Get the modem control state + * @port: Handle to the uart port structure + * + * Return: the modem control state + */ +static unsigned int cdns_uart_get_mctrl(struct uart_port *port) +{ + u32 val; + unsigned int mctrl = 0; + struct cdns_uart *cdns_uart_data = port->private_data; + + if (cdns_uart_data->cts_override) + return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; + + val = readl(port->membase + CDNS_UART_MODEMSR); + if (val & CDNS_UART_MODEMSR_CTS) + mctrl |= TIOCM_CTS; + if (val & CDNS_UART_MODEMSR_DSR) + mctrl |= TIOCM_DSR; + if (val & CDNS_UART_MODEMSR_RI) + mctrl |= TIOCM_RNG; + if (val & CDNS_UART_MODEMSR_DCD) + mctrl |= TIOCM_CAR; + + return mctrl; +} + +static void cdns_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + u32 val; + u32 mode_reg; + struct cdns_uart *cdns_uart_data = port->private_data; + + if (cdns_uart_data->cts_override) + return; + + val = readl(port->membase + CDNS_UART_MODEMCR); + mode_reg = readl(port->membase + CDNS_UART_MR); + + val &= ~(CDNS_UART_MODEMCR_RTS | CDNS_UART_MODEMCR_DTR); + mode_reg &= ~CDNS_UART_MR_CHMODE_MASK; + + if (mctrl & TIOCM_RTS) + val |= CDNS_UART_MODEMCR_RTS; + if (mctrl & TIOCM_DTR) + val |= CDNS_UART_MODEMCR_DTR; + if (mctrl & TIOCM_LOOP) + mode_reg |= CDNS_UART_MR_CHMODE_L_LOOP; + else + mode_reg |= CDNS_UART_MR_CHMODE_NORM; + + writel(val, port->membase + CDNS_UART_MODEMCR); + writel(mode_reg, port->membase + CDNS_UART_MR); +} + +#ifdef CONFIG_CONSOLE_POLL +static int cdns_uart_poll_get_char(struct uart_port *port) +{ + int c; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + /* Check if FIFO is empty */ + if (readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_RXEMPTY) + c = NO_POLL_CHAR; + else /* Read a character */ + c = (unsigned char) readl(port->membase + CDNS_UART_FIFO); + + spin_unlock_irqrestore(&port->lock, flags); + + return c; +} + +static void cdns_uart_poll_put_char(struct uart_port *port, unsigned char c) +{ + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + /* Wait until FIFO is empty */ + while (!(readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_TXEMPTY)) + cpu_relax(); + + /* Write a character */ + writel(c, port->membase + CDNS_UART_FIFO); + + /* Wait until FIFO is empty */ + while (!(readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_TXEMPTY)) + cpu_relax(); + + spin_unlock_irqrestore(&port->lock, flags); +} +#endif + +static void cdns_uart_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + switch (state) { + case UART_PM_STATE_OFF: + pm_runtime_mark_last_busy(port->dev); + pm_runtime_put_autosuspend(port->dev); + break; + default: + pm_runtime_get_sync(port->dev); + break; + } +} + +static const struct uart_ops cdns_uart_ops = { + .set_mctrl = cdns_uart_set_mctrl, + .get_mctrl = cdns_uart_get_mctrl, + .start_tx = cdns_uart_start_tx, + .stop_tx = cdns_uart_stop_tx, + .stop_rx = cdns_uart_stop_rx, + .tx_empty = cdns_uart_tx_empty, + .break_ctl = cdns_uart_break_ctl, + .set_termios = cdns_uart_set_termios, + .startup = cdns_uart_startup, + .shutdown = cdns_uart_shutdown, + .pm = cdns_uart_pm, + .type = cdns_uart_type, + .verify_port = cdns_uart_verify_port, + .request_port = cdns_uart_request_port, + .release_port = cdns_uart_release_port, + .config_port = cdns_uart_config_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = cdns_uart_poll_get_char, + .poll_put_char = cdns_uart_poll_put_char, +#endif +}; + +static struct uart_driver cdns_uart_uart_driver; + +#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE +/** + * cdns_uart_console_putchar - write the character to the FIFO buffer + * @port: Handle to the uart port structure + * @ch: Character to be written + */ +static void cdns_uart_console_putchar(struct uart_port *port, int ch) +{ + while (readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_TXFULL) + cpu_relax(); + writel(ch, port->membase + CDNS_UART_FIFO); +} + +static void cdns_early_write(struct console *con, const char *s, + unsigned n) +{ + struct earlycon_device *dev = con->data; + + uart_console_write(&dev->port, s, n, cdns_uart_console_putchar); +} + +static int __init cdns_early_console_setup(struct earlycon_device *device, + const char *opt) +{ + struct uart_port *port = &device->port; + + if (!port->membase) + return -ENODEV; + + /* initialise control register */ + writel(CDNS_UART_CR_TX_EN|CDNS_UART_CR_TXRST|CDNS_UART_CR_RXRST, + port->membase + CDNS_UART_CR); + + /* only set baud if specified on command line - otherwise + * assume it has been initialized by a boot loader. + */ + if (port->uartclk && device->baud) { + u32 cd = 0, bdiv = 0; + u32 mr; + int div8; + + cdns_uart_calc_baud_divs(port->uartclk, device->baud, + &bdiv, &cd, &div8); + mr = CDNS_UART_MR_PARITY_NONE; + if (div8) + mr |= CDNS_UART_MR_CLKSEL; + + writel(mr, port->membase + CDNS_UART_MR); + writel(cd, port->membase + CDNS_UART_BAUDGEN); + writel(bdiv, port->membase + CDNS_UART_BAUDDIV); + } + + device->con->write = cdns_early_write; + + return 0; +} +OF_EARLYCON_DECLARE(cdns, "xlnx,xuartps", cdns_early_console_setup); +OF_EARLYCON_DECLARE(cdns, "cdns,uart-r1p8", cdns_early_console_setup); +OF_EARLYCON_DECLARE(cdns, "cdns,uart-r1p12", cdns_early_console_setup); +OF_EARLYCON_DECLARE(cdns, "xlnx,zynqmp-uart", cdns_early_console_setup); + + +/* Static pointer to console port */ +static struct uart_port *console_port; + +/** + * cdns_uart_console_write - perform write operation + * @co: Console handle + * @s: Pointer to character array + * @count: No of characters + */ +static void cdns_uart_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_port *port = console_port; + unsigned long flags = 0; + unsigned int imr, ctrl; + int locked = 1; + + if (port->sysrq) + locked = 0; + else if (oops_in_progress) + locked = spin_trylock_irqsave(&port->lock, flags); + else + spin_lock_irqsave(&port->lock, flags); + + /* save and disable interrupt */ + imr = readl(port->membase + CDNS_UART_IMR); + writel(imr, port->membase + CDNS_UART_IDR); + + /* + * Make sure that the tx part is enabled. Set the TX enable bit and + * clear the TX disable bit to enable the transmitter. + */ + ctrl = readl(port->membase + CDNS_UART_CR); + ctrl &= ~CDNS_UART_CR_TX_DIS; + ctrl |= CDNS_UART_CR_TX_EN; + writel(ctrl, port->membase + CDNS_UART_CR); + + uart_console_write(port, s, count, cdns_uart_console_putchar); + while (cdns_uart_tx_empty(port) != TIOCSER_TEMT) + cpu_relax(); + + /* restore interrupt state */ + writel(imr, port->membase + CDNS_UART_IER); + + if (locked) + spin_unlock_irqrestore(&port->lock, flags); +} + +/** + * cdns_uart_console_setup - Initialize the uart to default config + * @co: Console handle + * @options: Initial settings of uart + * + * Return: 0 on success, negative errno otherwise. + */ +static int cdns_uart_console_setup(struct console *co, char *options) +{ + struct uart_port *port = console_port; + + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + unsigned long time_out; + + if (!port->membase) { + pr_debug("console on " CDNS_UART_TTY_NAME "%i not present\n", + co->index); + return -ENODEV; + } + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + /* Wait for tx_empty before setting up the console */ + time_out = jiffies + usecs_to_jiffies(TX_TIMEOUT); + + while (time_before(jiffies, time_out) && + cdns_uart_tx_empty(port) != TIOCSER_TEMT) + cpu_relax(); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct console cdns_uart_console = { + .name = CDNS_UART_TTY_NAME, + .write = cdns_uart_console_write, + .device = uart_console_device, + .setup = cdns_uart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, /* Specified on the cmdline (e.g. console=ttyPS ) */ + .data = &cdns_uart_uart_driver, +}; +#endif /* CONFIG_SERIAL_XILINX_PS_UART_CONSOLE */ + +#ifdef CONFIG_PM_SLEEP +/** + * cdns_uart_suspend - suspend event + * @device: Pointer to the device structure + * + * Return: 0 + */ +static int cdns_uart_suspend(struct device *device) +{ + struct uart_port *port = dev_get_drvdata(device); + struct cdns_uart *cdns_uart = port->private_data; + int may_wake; + + may_wake = device_may_wakeup(device); + + if (console_suspend_enabled && uart_console(port) && may_wake) { + unsigned long flags = 0; + + spin_lock_irqsave(&port->lock, flags); + /* Empty the receive FIFO 1st before making changes */ + while (!(readl(port->membase + CDNS_UART_SR) & + CDNS_UART_SR_RXEMPTY)) + readl(port->membase + CDNS_UART_FIFO); + /* set RX trigger level to 1 */ + writel(1, port->membase + CDNS_UART_RXWM); + /* disable RX timeout interrups */ + writel(CDNS_UART_IXR_TOUT, port->membase + CDNS_UART_IDR); + spin_unlock_irqrestore(&port->lock, flags); + } + + /* + * Call the API provided in serial_core.c file which handles + * the suspend. + */ + return uart_suspend_port(cdns_uart->cdns_uart_driver, port); +} + +/** + * cdns_uart_resume - Resume after a previous suspend + * @device: Pointer to the device structure + * + * Return: 0 + */ +static int cdns_uart_resume(struct device *device) +{ + struct uart_port *port = dev_get_drvdata(device); + struct cdns_uart *cdns_uart = port->private_data; + unsigned long flags = 0; + u32 ctrl_reg; + int may_wake; + + may_wake = device_may_wakeup(device); + + if (console_suspend_enabled && uart_console(port) && !may_wake) { + clk_enable(cdns_uart->pclk); + clk_enable(cdns_uart->uartclk); + + spin_lock_irqsave(&port->lock, flags); + + /* Set TX/RX Reset */ + ctrl_reg = readl(port->membase + CDNS_UART_CR); + ctrl_reg |= CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST; + writel(ctrl_reg, port->membase + CDNS_UART_CR); + while (readl(port->membase + CDNS_UART_CR) & + (CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST)) + cpu_relax(); + + /* restore rx timeout value */ + writel(rx_timeout, port->membase + CDNS_UART_RXTOUT); + /* Enable Tx/Rx */ + ctrl_reg = readl(port->membase + CDNS_UART_CR); + ctrl_reg &= ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS); + ctrl_reg |= CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN; + writel(ctrl_reg, port->membase + CDNS_UART_CR); + + clk_disable(cdns_uart->uartclk); + clk_disable(cdns_uart->pclk); + spin_unlock_irqrestore(&port->lock, flags); + } else { + spin_lock_irqsave(&port->lock, flags); + /* restore original rx trigger level */ + writel(rx_trigger_level, port->membase + CDNS_UART_RXWM); + /* enable RX timeout interrupt */ + writel(CDNS_UART_IXR_TOUT, port->membase + CDNS_UART_IER); + spin_unlock_irqrestore(&port->lock, flags); + } + + return uart_resume_port(cdns_uart->cdns_uart_driver, port); +} +#endif /* ! CONFIG_PM_SLEEP */ +static int __maybe_unused cdns_runtime_suspend(struct device *dev) +{ + struct uart_port *port = dev_get_drvdata(dev); + struct cdns_uart *cdns_uart = port->private_data; + + clk_disable(cdns_uart->uartclk); + clk_disable(cdns_uart->pclk); + return 0; +}; + +static int __maybe_unused cdns_runtime_resume(struct device *dev) +{ + struct uart_port *port = dev_get_drvdata(dev); + struct cdns_uart *cdns_uart = port->private_data; + + clk_enable(cdns_uart->pclk); + clk_enable(cdns_uart->uartclk); + return 0; +}; + +static const struct dev_pm_ops cdns_uart_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(cdns_uart_suspend, cdns_uart_resume) + SET_RUNTIME_PM_OPS(cdns_runtime_suspend, + cdns_runtime_resume, NULL) +}; + +static const struct cdns_platform_data zynqmp_uart_def = { + .quirks = CDNS_UART_RXBS_SUPPORT, }; + +/* Match table for of_platform binding */ +static const struct of_device_id cdns_uart_of_match[] = { + { .compatible = "xlnx,xuartps", }, + { .compatible = "cdns,uart-r1p8", }, + { .compatible = "cdns,uart-r1p12", .data = &zynqmp_uart_def }, + { .compatible = "xlnx,zynqmp-uart", .data = &zynqmp_uart_def }, + {} +}; +MODULE_DEVICE_TABLE(of, cdns_uart_of_match); + +/* Temporary variable for storing number of instances */ +static int instances; + +/** + * cdns_uart_probe - Platform driver probe + * @pdev: Pointer to the platform device structure + * + * Return: 0 on success, negative errno otherwise + */ +static int cdns_uart_probe(struct platform_device *pdev) +{ + int rc, id, irq; + struct uart_port *port; + struct resource *res; + struct cdns_uart *cdns_uart_data; + const struct of_device_id *match; + + cdns_uart_data = devm_kzalloc(&pdev->dev, sizeof(*cdns_uart_data), + GFP_KERNEL); + if (!cdns_uart_data) + return -ENOMEM; + port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL); + if (!port) + return -ENOMEM; + + /* Look for a serialN alias */ + id = of_alias_get_id(pdev->dev.of_node, "serial"); + if (id < 0) + id = 0; + + if (id >= CDNS_UART_NR_PORTS) { + dev_err(&pdev->dev, "Cannot get uart_port structure\n"); + return -ENODEV; + } + + if (!cdns_uart_uart_driver.state) { + cdns_uart_uart_driver.owner = THIS_MODULE; + cdns_uart_uart_driver.driver_name = CDNS_UART_NAME; + cdns_uart_uart_driver.dev_name = CDNS_UART_TTY_NAME; + cdns_uart_uart_driver.major = CDNS_UART_MAJOR; + cdns_uart_uart_driver.minor = CDNS_UART_MINOR; + cdns_uart_uart_driver.nr = CDNS_UART_NR_PORTS; +#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE + cdns_uart_uart_driver.cons = &cdns_uart_console; +#endif + + rc = uart_register_driver(&cdns_uart_uart_driver); + if (rc < 0) { + dev_err(&pdev->dev, "Failed to register driver\n"); + return rc; + } + } + + cdns_uart_data->cdns_uart_driver = &cdns_uart_uart_driver; + + match = of_match_node(cdns_uart_of_match, pdev->dev.of_node); + if (match && match->data) { + const struct cdns_platform_data *data = match->data; + + cdns_uart_data->quirks = data->quirks; + } + + cdns_uart_data->pclk = devm_clk_get(&pdev->dev, "pclk"); + if (PTR_ERR(cdns_uart_data->pclk) == -EPROBE_DEFER) { + rc = PTR_ERR(cdns_uart_data->pclk); + goto err_out_unregister_driver; + } + + if (IS_ERR(cdns_uart_data->pclk)) { + cdns_uart_data->pclk = devm_clk_get(&pdev->dev, "aper_clk"); + if (IS_ERR(cdns_uart_data->pclk)) { + rc = PTR_ERR(cdns_uart_data->pclk); + goto err_out_unregister_driver; + } + dev_err(&pdev->dev, "clock name 'aper_clk' is deprecated.\n"); + } + + cdns_uart_data->uartclk = devm_clk_get(&pdev->dev, "uart_clk"); + if (PTR_ERR(cdns_uart_data->uartclk) == -EPROBE_DEFER) { + rc = PTR_ERR(cdns_uart_data->uartclk); + goto err_out_unregister_driver; + } + + if (IS_ERR(cdns_uart_data->uartclk)) { + cdns_uart_data->uartclk = devm_clk_get(&pdev->dev, "ref_clk"); + if (IS_ERR(cdns_uart_data->uartclk)) { + rc = PTR_ERR(cdns_uart_data->uartclk); + goto err_out_unregister_driver; + } + dev_err(&pdev->dev, "clock name 'ref_clk' is deprecated.\n"); + } + + rc = clk_prepare_enable(cdns_uart_data->pclk); + if (rc) { + dev_err(&pdev->dev, "Unable to enable pclk clock.\n"); + goto err_out_unregister_driver; + } + rc = clk_prepare_enable(cdns_uart_data->uartclk); + if (rc) { + dev_err(&pdev->dev, "Unable to enable device clock.\n"); + goto err_out_clk_dis_pclk; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + rc = -ENODEV; + goto err_out_clk_disable; + } + + irq = platform_get_irq(pdev, 0); + if (irq <= 0) { + rc = -ENXIO; + goto err_out_clk_disable; + } + +#ifdef CONFIG_COMMON_CLK + cdns_uart_data->clk_rate_change_nb.notifier_call = + cdns_uart_clk_notifier_cb; + if (clk_notifier_register(cdns_uart_data->uartclk, + &cdns_uart_data->clk_rate_change_nb)) + dev_warn(&pdev->dev, "Unable to register clock notifier.\n"); +#endif + + /* At this point, we've got an empty uart_port struct, initialize it */ + spin_lock_init(&port->lock); + port->type = PORT_UNKNOWN; + port->iotype = UPIO_MEM32; + port->flags = UPF_BOOT_AUTOCONF; + port->ops = &cdns_uart_ops; + port->fifosize = CDNS_UART_FIFO_SIZE; + port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_XILINX_PS_UART_CONSOLE); + port->line = id; + + /* + * Register the port. + * This function also registers this device with the tty layer + * and triggers invocation of the config_port() entry point. + */ + port->mapbase = res->start; + port->irq = irq; + port->dev = &pdev->dev; + port->uartclk = clk_get_rate(cdns_uart_data->uartclk); + port->private_data = cdns_uart_data; + cdns_uart_data->port = port; + platform_set_drvdata(pdev, port); + + pm_runtime_use_autosuspend(&pdev->dev); + pm_runtime_set_autosuspend_delay(&pdev->dev, UART_AUTOSUSPEND_TIMEOUT); + pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); + device_init_wakeup(port->dev, true); + +#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE + /* + * If console hasn't been found yet try to assign this port + * because it is required to be assigned for console setup function. + * If register_console() don't assign value, then console_port pointer + * is cleanup. + */ + if (!console_port) { + cdns_uart_console.index = id; + console_port = port; + } +#endif + + rc = uart_add_one_port(&cdns_uart_uart_driver, port); + if (rc) { + dev_err(&pdev->dev, + "uart_add_one_port() failed; err=%i\n", rc); + goto err_out_pm_disable; + } + +#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE + /* This is not port which is used for console that's why clean it up */ + if (console_port == port && + !(cdns_uart_uart_driver.cons->flags & CON_ENABLED)) { + console_port = NULL; + cdns_uart_console.index = -1; + } +#endif + + cdns_uart_data->cts_override = of_property_read_bool(pdev->dev.of_node, + "cts-override"); + + instances++; + + return 0; + +err_out_pm_disable: + pm_runtime_disable(&pdev->dev); + pm_runtime_set_suspended(&pdev->dev); + pm_runtime_dont_use_autosuspend(&pdev->dev); +#ifdef CONFIG_COMMON_CLK + clk_notifier_unregister(cdns_uart_data->uartclk, + &cdns_uart_data->clk_rate_change_nb); +#endif +err_out_clk_disable: + clk_disable_unprepare(cdns_uart_data->uartclk); +err_out_clk_dis_pclk: + clk_disable_unprepare(cdns_uart_data->pclk); +err_out_unregister_driver: + if (!instances) + uart_unregister_driver(cdns_uart_data->cdns_uart_driver); + return rc; +} + +/** + * cdns_uart_remove - called when the platform driver is unregistered + * @pdev: Pointer to the platform device structure + * + * Return: 0 on success, negative errno otherwise + */ +static int cdns_uart_remove(struct platform_device *pdev) +{ + struct uart_port *port = platform_get_drvdata(pdev); + struct cdns_uart *cdns_uart_data = port->private_data; + int rc; + + /* Remove the cdns_uart port from the serial core */ +#ifdef CONFIG_COMMON_CLK + clk_notifier_unregister(cdns_uart_data->uartclk, + &cdns_uart_data->clk_rate_change_nb); +#endif + rc = uart_remove_one_port(cdns_uart_data->cdns_uart_driver, port); + port->mapbase = 0; + clk_disable_unprepare(cdns_uart_data->uartclk); + clk_disable_unprepare(cdns_uart_data->pclk); + pm_runtime_disable(&pdev->dev); + pm_runtime_set_suspended(&pdev->dev); + pm_runtime_dont_use_autosuspend(&pdev->dev); + device_init_wakeup(&pdev->dev, false); + +#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE + if (console_port == port) + console_port = NULL; +#endif + + if (!--instances) + uart_unregister_driver(cdns_uart_data->cdns_uart_driver); + return rc; +} + +static struct platform_driver cdns_uart_platform_driver = { + .probe = cdns_uart_probe, + .remove = cdns_uart_remove, + .driver = { + .name = CDNS_UART_NAME, + .of_match_table = cdns_uart_of_match, + .pm = &cdns_uart_dev_pm_ops, + .suppress_bind_attrs = IS_BUILTIN(CONFIG_SERIAL_XILINX_PS_UART), + }, +}; + +static int __init cdns_uart_init(void) +{ + /* Register the platform driver */ + return platform_driver_register(&cdns_uart_platform_driver); +} + +static void __exit cdns_uart_exit(void) +{ + /* Unregister the platform driver */ + platform_driver_unregister(&cdns_uart_platform_driver); +} + +arch_initcall(cdns_uart_init); +module_exit(cdns_uart_exit); + +MODULE_DESCRIPTION("Driver for Cadence UART"); +MODULE_AUTHOR("Xilinx Inc."); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/zs.c b/drivers/tty/serial/zs.c new file mode 100644 index 000000000..4b4f60464 --- /dev/null +++ b/drivers/tty/serial/zs.c @@ -0,0 +1,1307 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * zs.c: Serial port driver for IOASIC DECstations. + * + * Derived from drivers/sbus/char/sunserial.c by Paul Mackerras. + * Derived from drivers/macintosh/macserial.c by Harald Koerfgen. + * + * DECstation changes + * Copyright (C) 1998-2000 Harald Koerfgen + * Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2007 Maciej W. Rozycki + * + * For the rest of the code the original Copyright applies: + * Copyright (C) 1996 Paul Mackerras (Paul.Mackerras@cs.anu.edu.au) + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + * + * + * Note: for IOASIC systems the wiring is as follows: + * + * mouse/keyboard: + * DIN-7 MJ-4 signal SCC + * 2 1 TxD <- A.TxD + * 3 4 RxD -> A.RxD + * + * EIA-232/EIA-423: + * DB-25 MMJ-6 signal SCC + * 2 2 TxD <- B.TxD + * 3 5 RxD -> B.RxD + * 4 RTS <- ~A.RTS + * 5 CTS -> ~B.CTS + * 6 6 DSR -> ~A.SYNC + * 8 CD -> ~B.DCD + * 12 DSRS(DCE) -> ~A.CTS (*) + * 15 TxC -> B.TxC + * 17 RxC -> B.RxC + * 20 1 DTR <- ~A.DTR + * 22 RI -> ~A.DCD + * 23 DSRS(DTE) <- ~B.RTS + * + * (*) EIA-232 defines the signal at this pin to be SCD, while DSRS(DCE) + * is shared with DSRS(DTE) at pin 23. + * + * As you can immediately notice the wiring of the RTS, DTR and DSR signals + * is a bit odd. This makes the handling of port B unnecessarily + * complicated and prevents the use of some automatic modes of operation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include + +#include "zs.h" + + +MODULE_AUTHOR("Maciej W. Rozycki "); +MODULE_DESCRIPTION("DECstation Z85C30 serial driver"); +MODULE_LICENSE("GPL"); + + +static char zs_name[] __initdata = "DECstation Z85C30 serial driver version "; +static char zs_version[] __initdata = "0.10"; + +/* + * It would be nice to dynamically allocate everything that + * depends on ZS_NUM_SCCS, so we could support any number of + * Z85C30s, but for now... + */ +#define ZS_NUM_SCCS 2 /* Max # of ZS chips supported. */ +#define ZS_NUM_CHAN 2 /* 2 channels per chip. */ +#define ZS_CHAN_A 0 /* Index of the channel A. */ +#define ZS_CHAN_B 1 /* Index of the channel B. */ +#define ZS_CHAN_IO_SIZE 8 /* IOMEM space size. */ +#define ZS_CHAN_IO_STRIDE 4 /* Register alignment. */ +#define ZS_CHAN_IO_OFFSET 1 /* The SCC resides on the high byte + of the 16-bit IOBUS. */ +#define ZS_CLOCK 7372800 /* Z85C30 PCLK input clock rate. */ + +#define to_zport(uport) container_of(uport, struct zs_port, port) + +struct zs_parms { + resource_size_t scc[ZS_NUM_SCCS]; + int irq[ZS_NUM_SCCS]; +}; + +static struct zs_scc zs_sccs[ZS_NUM_SCCS]; + +static u8 zs_init_regs[ZS_NUM_REGS] __initdata = { + 0, /* write 0 */ + PAR_SPEC, /* write 1 */ + 0, /* write 2 */ + 0, /* write 3 */ + X16CLK | SB1, /* write 4 */ + 0, /* write 5 */ + 0, 0, 0, /* write 6, 7, 8 */ + MIE | DLC | NV, /* write 9 */ + NRZ, /* write 10 */ + TCBR | RCBR, /* write 11 */ + 0, 0, /* BRG time constant, write 12 + 13 */ + BRSRC | BRENABL, /* write 14 */ + 0, /* write 15 */ +}; + +/* + * Debugging. + */ +#undef ZS_DEBUG_REGS + + +/* + * Reading and writing Z85C30 registers. + */ +static void recovery_delay(void) +{ + udelay(2); +} + +static u8 read_zsreg(struct zs_port *zport, int reg) +{ + void __iomem *control = zport->port.membase + ZS_CHAN_IO_OFFSET; + u8 retval; + + if (reg != 0) { + writeb(reg & 0xf, control); + fast_iob(); + recovery_delay(); + } + retval = readb(control); + recovery_delay(); + return retval; +} + +static void write_zsreg(struct zs_port *zport, int reg, u8 value) +{ + void __iomem *control = zport->port.membase + ZS_CHAN_IO_OFFSET; + + if (reg != 0) { + writeb(reg & 0xf, control); + fast_iob(); recovery_delay(); + } + writeb(value, control); + fast_iob(); + recovery_delay(); + return; +} + +static u8 read_zsdata(struct zs_port *zport) +{ + void __iomem *data = zport->port.membase + + ZS_CHAN_IO_STRIDE + ZS_CHAN_IO_OFFSET; + u8 retval; + + retval = readb(data); + recovery_delay(); + return retval; +} + +static void write_zsdata(struct zs_port *zport, u8 value) +{ + void __iomem *data = zport->port.membase + + ZS_CHAN_IO_STRIDE + ZS_CHAN_IO_OFFSET; + + writeb(value, data); + fast_iob(); + recovery_delay(); + return; +} + +#ifdef ZS_DEBUG_REGS +void zs_dump(void) +{ + struct zs_port *zport; + int i, j; + + for (i = 0; i < ZS_NUM_SCCS * ZS_NUM_CHAN; i++) { + zport = &zs_sccs[i / ZS_NUM_CHAN].zport[i % ZS_NUM_CHAN]; + + if (!zport->scc) + continue; + + for (j = 0; j < 16; j++) + printk("W%-2d = 0x%02x\t", j, zport->regs[j]); + printk("\n"); + for (j = 0; j < 16; j++) + printk("R%-2d = 0x%02x\t", j, read_zsreg(zport, j)); + printk("\n\n"); + } +} +#endif + + +static void zs_spin_lock_cond_irq(spinlock_t *lock, int irq) +{ + if (irq) + spin_lock_irq(lock); + else + spin_lock(lock); +} + +static void zs_spin_unlock_cond_irq(spinlock_t *lock, int irq) +{ + if (irq) + spin_unlock_irq(lock); + else + spin_unlock(lock); +} + +static int zs_receive_drain(struct zs_port *zport) +{ + int loops = 10000; + + while ((read_zsreg(zport, R0) & Rx_CH_AV) && --loops) + read_zsdata(zport); + return loops; +} + +static int zs_transmit_drain(struct zs_port *zport, int irq) +{ + struct zs_scc *scc = zport->scc; + int loops = 10000; + + while (!(read_zsreg(zport, R0) & Tx_BUF_EMP) && --loops) { + zs_spin_unlock_cond_irq(&scc->zlock, irq); + udelay(2); + zs_spin_lock_cond_irq(&scc->zlock, irq); + } + return loops; +} + +static int zs_line_drain(struct zs_port *zport, int irq) +{ + struct zs_scc *scc = zport->scc; + int loops = 10000; + + while (!(read_zsreg(zport, R1) & ALL_SNT) && --loops) { + zs_spin_unlock_cond_irq(&scc->zlock, irq); + udelay(2); + zs_spin_lock_cond_irq(&scc->zlock, irq); + } + return loops; +} + + +static void load_zsregs(struct zs_port *zport, u8 *regs, int irq) +{ + /* Let the current transmission finish. */ + zs_line_drain(zport, irq); + /* Load 'em up. */ + write_zsreg(zport, R3, regs[3] & ~RxENABLE); + write_zsreg(zport, R5, regs[5] & ~TxENAB); + write_zsreg(zport, R4, regs[4]); + write_zsreg(zport, R9, regs[9]); + write_zsreg(zport, R1, regs[1]); + write_zsreg(zport, R2, regs[2]); + write_zsreg(zport, R10, regs[10]); + write_zsreg(zport, R14, regs[14] & ~BRENABL); + write_zsreg(zport, R11, regs[11]); + write_zsreg(zport, R12, regs[12]); + write_zsreg(zport, R13, regs[13]); + write_zsreg(zport, R14, regs[14]); + write_zsreg(zport, R15, regs[15]); + if (regs[3] & RxENABLE) + write_zsreg(zport, R3, regs[3]); + if (regs[5] & TxENAB) + write_zsreg(zport, R5, regs[5]); + return; +} + + +/* + * Status handling routines. + */ + +/* + * zs_tx_empty() -- get the transmitter empty status + * + * Purpose: Let user call ioctl() to get info when the UART physically + * is emptied. On bus types like RS485, the transmitter must + * release the bus after transmitting. This must be done when + * the transmit shift register is empty, not be done when the + * transmit holding register is empty. This functionality + * allows an RS485 driver to be written in user space. + */ +static unsigned int zs_tx_empty(struct uart_port *uport) +{ + struct zs_port *zport = to_zport(uport); + struct zs_scc *scc = zport->scc; + unsigned long flags; + u8 status; + + spin_lock_irqsave(&scc->zlock, flags); + status = read_zsreg(zport, R1); + spin_unlock_irqrestore(&scc->zlock, flags); + + return status & ALL_SNT ? TIOCSER_TEMT : 0; +} + +static unsigned int zs_raw_get_ab_mctrl(struct zs_port *zport_a, + struct zs_port *zport_b) +{ + u8 status_a, status_b; + unsigned int mctrl; + + status_a = read_zsreg(zport_a, R0); + status_b = read_zsreg(zport_b, R0); + + mctrl = ((status_b & CTS) ? TIOCM_CTS : 0) | + ((status_b & DCD) ? TIOCM_CAR : 0) | + ((status_a & DCD) ? TIOCM_RNG : 0) | + ((status_a & SYNC_HUNT) ? TIOCM_DSR : 0); + + return mctrl; +} + +static unsigned int zs_raw_get_mctrl(struct zs_port *zport) +{ + struct zs_port *zport_a = &zport->scc->zport[ZS_CHAN_A]; + + return zport != zport_a ? zs_raw_get_ab_mctrl(zport_a, zport) : 0; +} + +static unsigned int zs_raw_xor_mctrl(struct zs_port *zport) +{ + struct zs_port *zport_a = &zport->scc->zport[ZS_CHAN_A]; + unsigned int mmask, mctrl, delta; + u8 mask_a, mask_b; + + if (zport == zport_a) + return 0; + + mask_a = zport_a->regs[15]; + mask_b = zport->regs[15]; + + mmask = ((mask_b & CTSIE) ? TIOCM_CTS : 0) | + ((mask_b & DCDIE) ? TIOCM_CAR : 0) | + ((mask_a & DCDIE) ? TIOCM_RNG : 0) | + ((mask_a & SYNCIE) ? TIOCM_DSR : 0); + + mctrl = zport->mctrl; + if (mmask) { + mctrl &= ~mmask; + mctrl |= zs_raw_get_ab_mctrl(zport_a, zport) & mmask; + } + + delta = mctrl ^ zport->mctrl; + if (delta) + zport->mctrl = mctrl; + + return delta; +} + +static unsigned int zs_get_mctrl(struct uart_port *uport) +{ + struct zs_port *zport = to_zport(uport); + struct zs_scc *scc = zport->scc; + unsigned int mctrl; + + spin_lock(&scc->zlock); + mctrl = zs_raw_get_mctrl(zport); + spin_unlock(&scc->zlock); + + return mctrl; +} + +static void zs_set_mctrl(struct uart_port *uport, unsigned int mctrl) +{ + struct zs_port *zport = to_zport(uport); + struct zs_scc *scc = zport->scc; + struct zs_port *zport_a = &scc->zport[ZS_CHAN_A]; + u8 oldloop, newloop; + + spin_lock(&scc->zlock); + if (zport != zport_a) { + if (mctrl & TIOCM_DTR) + zport_a->regs[5] |= DTR; + else + zport_a->regs[5] &= ~DTR; + if (mctrl & TIOCM_RTS) + zport_a->regs[5] |= RTS; + else + zport_a->regs[5] &= ~RTS; + write_zsreg(zport_a, R5, zport_a->regs[5]); + } + + /* Rarely modified, so don't poke at hardware unless necessary. */ + oldloop = zport->regs[14]; + newloop = oldloop; + if (mctrl & TIOCM_LOOP) + newloop |= LOOPBAK; + else + newloop &= ~LOOPBAK; + if (newloop != oldloop) { + zport->regs[14] = newloop; + write_zsreg(zport, R14, zport->regs[14]); + } + spin_unlock(&scc->zlock); +} + +static void zs_raw_stop_tx(struct zs_port *zport) +{ + write_zsreg(zport, R0, RES_Tx_P); + zport->tx_stopped = 1; +} + +static void zs_stop_tx(struct uart_port *uport) +{ + struct zs_port *zport = to_zport(uport); + struct zs_scc *scc = zport->scc; + + spin_lock(&scc->zlock); + zs_raw_stop_tx(zport); + spin_unlock(&scc->zlock); +} + +static void zs_raw_transmit_chars(struct zs_port *); + +static void zs_start_tx(struct uart_port *uport) +{ + struct zs_port *zport = to_zport(uport); + struct zs_scc *scc = zport->scc; + + spin_lock(&scc->zlock); + if (zport->tx_stopped) { + zs_transmit_drain(zport, 0); + zport->tx_stopped = 0; + zs_raw_transmit_chars(zport); + } + spin_unlock(&scc->zlock); +} + +static void zs_stop_rx(struct uart_port *uport) +{ + struct zs_port *zport = to_zport(uport); + struct zs_scc *scc = zport->scc; + struct zs_port *zport_a = &scc->zport[ZS_CHAN_A]; + + spin_lock(&scc->zlock); + zport->regs[15] &= ~BRKIE; + zport->regs[1] &= ~(RxINT_MASK | TxINT_ENAB); + zport->regs[1] |= RxINT_DISAB; + + if (zport != zport_a) { + /* A-side DCD tracks RI and SYNC tracks DSR. */ + zport_a->regs[15] &= ~(DCDIE | SYNCIE); + write_zsreg(zport_a, R15, zport_a->regs[15]); + if (!(zport_a->regs[15] & BRKIE)) { + zport_a->regs[1] &= ~EXT_INT_ENAB; + write_zsreg(zport_a, R1, zport_a->regs[1]); + } + + /* This-side DCD tracks DCD and CTS tracks CTS. */ + zport->regs[15] &= ~(DCDIE | CTSIE); + zport->regs[1] &= ~EXT_INT_ENAB; + } else { + /* DCD tracks RI and SYNC tracks DSR for the B side. */ + if (!(zport->regs[15] & (DCDIE | SYNCIE))) + zport->regs[1] &= ~EXT_INT_ENAB; + } + + write_zsreg(zport, R15, zport->regs[15]); + write_zsreg(zport, R1, zport->regs[1]); + spin_unlock(&scc->zlock); +} + +static void zs_enable_ms(struct uart_port *uport) +{ + struct zs_port *zport = to_zport(uport); + struct zs_scc *scc = zport->scc; + struct zs_port *zport_a = &scc->zport[ZS_CHAN_A]; + + if (zport == zport_a) + return; + + spin_lock(&scc->zlock); + + /* Clear Ext interrupts if not being handled already. */ + if (!(zport_a->regs[1] & EXT_INT_ENAB)) + write_zsreg(zport_a, R0, RES_EXT_INT); + + /* A-side DCD tracks RI and SYNC tracks DSR. */ + zport_a->regs[1] |= EXT_INT_ENAB; + zport_a->regs[15] |= DCDIE | SYNCIE; + + /* This-side DCD tracks DCD and CTS tracks CTS. */ + zport->regs[15] |= DCDIE | CTSIE; + + zs_raw_xor_mctrl(zport); + + write_zsreg(zport_a, R1, zport_a->regs[1]); + write_zsreg(zport_a, R15, zport_a->regs[15]); + write_zsreg(zport, R15, zport->regs[15]); + spin_unlock(&scc->zlock); +} + +static void zs_break_ctl(struct uart_port *uport, int break_state) +{ + struct zs_port *zport = to_zport(uport); + struct zs_scc *scc = zport->scc; + unsigned long flags; + + spin_lock_irqsave(&scc->zlock, flags); + if (break_state == -1) + zport->regs[5] |= SND_BRK; + else + zport->regs[5] &= ~SND_BRK; + write_zsreg(zport, R5, zport->regs[5]); + spin_unlock_irqrestore(&scc->zlock, flags); +} + + +/* + * Interrupt handling routines. + */ +#define Rx_BRK 0x0100 /* BREAK event software flag. */ +#define Rx_SYS 0x0200 /* SysRq event software flag. */ + +static void zs_receive_chars(struct zs_port *zport) +{ + struct uart_port *uport = &zport->port; + struct zs_scc *scc = zport->scc; + struct uart_icount *icount; + unsigned int avail, status, ch, flag; + int count; + + for (count = 16; count; count--) { + spin_lock(&scc->zlock); + avail = read_zsreg(zport, R0) & Rx_CH_AV; + spin_unlock(&scc->zlock); + if (!avail) + break; + + spin_lock(&scc->zlock); + status = read_zsreg(zport, R1) & (Rx_OVR | FRM_ERR | PAR_ERR); + ch = read_zsdata(zport); + spin_unlock(&scc->zlock); + + flag = TTY_NORMAL; + + icount = &uport->icount; + icount->rx++; + + /* Handle the null char got when BREAK is removed. */ + if (!ch) + status |= zport->tty_break; + if (unlikely(status & + (Rx_OVR | FRM_ERR | PAR_ERR | Rx_SYS | Rx_BRK))) { + zport->tty_break = 0; + + /* Reset the error indication. */ + if (status & (Rx_OVR | FRM_ERR | PAR_ERR)) { + spin_lock(&scc->zlock); + write_zsreg(zport, R0, ERR_RES); + spin_unlock(&scc->zlock); + } + + if (status & (Rx_SYS | Rx_BRK)) { + icount->brk++; + /* SysRq discards the null char. */ + if (status & Rx_SYS) + continue; + } else if (status & FRM_ERR) + icount->frame++; + else if (status & PAR_ERR) + icount->parity++; + if (status & Rx_OVR) + icount->overrun++; + + status &= uport->read_status_mask; + if (status & Rx_BRK) + flag = TTY_BREAK; + else if (status & FRM_ERR) + flag = TTY_FRAME; + else if (status & PAR_ERR) + flag = TTY_PARITY; + } + + if (uart_handle_sysrq_char(uport, ch)) + continue; + + uart_insert_char(uport, status, Rx_OVR, ch, flag); + } + + tty_flip_buffer_push(&uport->state->port); +} + +static void zs_raw_transmit_chars(struct zs_port *zport) +{ + struct circ_buf *xmit = &zport->port.state->xmit; + + /* XON/XOFF chars. */ + if (zport->port.x_char) { + write_zsdata(zport, zport->port.x_char); + zport->port.icount.tx++; + zport->port.x_char = 0; + return; + } + + /* If nothing to do or stopped or hardware stopped. */ + if (uart_circ_empty(xmit) || uart_tx_stopped(&zport->port)) { + zs_raw_stop_tx(zport); + return; + } + + /* Send char. */ + write_zsdata(zport, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + zport->port.icount.tx++; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&zport->port); + + /* Are we are done? */ + if (uart_circ_empty(xmit)) + zs_raw_stop_tx(zport); +} + +static void zs_transmit_chars(struct zs_port *zport) +{ + struct zs_scc *scc = zport->scc; + + spin_lock(&scc->zlock); + zs_raw_transmit_chars(zport); + spin_unlock(&scc->zlock); +} + +static void zs_status_handle(struct zs_port *zport, struct zs_port *zport_a) +{ + struct uart_port *uport = &zport->port; + struct zs_scc *scc = zport->scc; + unsigned int delta; + u8 status, brk; + + spin_lock(&scc->zlock); + + /* Get status from Read Register 0. */ + status = read_zsreg(zport, R0); + + if (zport->regs[15] & BRKIE) { + brk = status & BRK_ABRT; + if (brk && !zport->brk) { + spin_unlock(&scc->zlock); + if (uart_handle_break(uport)) + zport->tty_break = Rx_SYS; + else + zport->tty_break = Rx_BRK; + spin_lock(&scc->zlock); + } + zport->brk = brk; + } + + if (zport != zport_a) { + delta = zs_raw_xor_mctrl(zport); + spin_unlock(&scc->zlock); + + if (delta & TIOCM_CTS) + uart_handle_cts_change(uport, + zport->mctrl & TIOCM_CTS); + if (delta & TIOCM_CAR) + uart_handle_dcd_change(uport, + zport->mctrl & TIOCM_CAR); + if (delta & TIOCM_RNG) + uport->icount.dsr++; + if (delta & TIOCM_DSR) + uport->icount.rng++; + + if (delta) + wake_up_interruptible(&uport->state->port.delta_msr_wait); + + spin_lock(&scc->zlock); + } + + /* Clear the status condition... */ + write_zsreg(zport, R0, RES_EXT_INT); + + spin_unlock(&scc->zlock); +} + +/* + * This is the Z85C30 driver's generic interrupt routine. + */ +static irqreturn_t zs_interrupt(int irq, void *dev_id) +{ + struct zs_scc *scc = dev_id; + struct zs_port *zport_a = &scc->zport[ZS_CHAN_A]; + struct zs_port *zport_b = &scc->zport[ZS_CHAN_B]; + irqreturn_t status = IRQ_NONE; + u8 zs_intreg; + int count; + + /* + * NOTE: The read register 3, which holds the irq status, + * does so for both channels on each chip. Although + * the status value itself must be read from the A + * channel and is only valid when read from channel A. + * Yes... broken hardware... + */ + for (count = 16; count; count--) { + spin_lock(&scc->zlock); + zs_intreg = read_zsreg(zport_a, R3); + spin_unlock(&scc->zlock); + if (!zs_intreg) + break; + + /* + * We do not like losing characters, so we prioritise + * interrupt sources a little bit differently than + * the SCC would, was it allowed to. + */ + if (zs_intreg & CHBRxIP) + zs_receive_chars(zport_b); + if (zs_intreg & CHARxIP) + zs_receive_chars(zport_a); + if (zs_intreg & CHBEXT) + zs_status_handle(zport_b, zport_a); + if (zs_intreg & CHAEXT) + zs_status_handle(zport_a, zport_a); + if (zs_intreg & CHBTxIP) + zs_transmit_chars(zport_b); + if (zs_intreg & CHATxIP) + zs_transmit_chars(zport_a); + + status = IRQ_HANDLED; + } + + return status; +} + + +/* + * Finally, routines used to initialize the serial port. + */ +static int zs_startup(struct uart_port *uport) +{ + struct zs_port *zport = to_zport(uport); + struct zs_scc *scc = zport->scc; + unsigned long flags; + int irq_guard; + int ret; + + irq_guard = atomic_add_return(1, &scc->irq_guard); + if (irq_guard == 1) { + ret = request_irq(zport->port.irq, zs_interrupt, + IRQF_SHARED, "scc", scc); + if (ret) { + atomic_add(-1, &scc->irq_guard); + printk(KERN_ERR "zs: can't get irq %d\n", + zport->port.irq); + return ret; + } + } + + spin_lock_irqsave(&scc->zlock, flags); + + /* Clear the receive FIFO. */ + zs_receive_drain(zport); + + /* Clear the interrupt registers. */ + write_zsreg(zport, R0, ERR_RES); + write_zsreg(zport, R0, RES_Tx_P); + /* But Ext only if not being handled already. */ + if (!(zport->regs[1] & EXT_INT_ENAB)) + write_zsreg(zport, R0, RES_EXT_INT); + + /* Finally, enable sequencing and interrupts. */ + zport->regs[1] &= ~RxINT_MASK; + zport->regs[1] |= RxINT_ALL | TxINT_ENAB | EXT_INT_ENAB; + zport->regs[3] |= RxENABLE; + zport->regs[15] |= BRKIE; + write_zsreg(zport, R1, zport->regs[1]); + write_zsreg(zport, R3, zport->regs[3]); + write_zsreg(zport, R5, zport->regs[5]); + write_zsreg(zport, R15, zport->regs[15]); + + /* Record the current state of RR0. */ + zport->mctrl = zs_raw_get_mctrl(zport); + zport->brk = read_zsreg(zport, R0) & BRK_ABRT; + + zport->tx_stopped = 1; + + spin_unlock_irqrestore(&scc->zlock, flags); + + return 0; +} + +static void zs_shutdown(struct uart_port *uport) +{ + struct zs_port *zport = to_zport(uport); + struct zs_scc *scc = zport->scc; + unsigned long flags; + int irq_guard; + + spin_lock_irqsave(&scc->zlock, flags); + + zport->regs[3] &= ~RxENABLE; + write_zsreg(zport, R5, zport->regs[5]); + write_zsreg(zport, R3, zport->regs[3]); + + spin_unlock_irqrestore(&scc->zlock, flags); + + irq_guard = atomic_add_return(-1, &scc->irq_guard); + if (!irq_guard) + free_irq(zport->port.irq, scc); +} + + +static void zs_reset(struct zs_port *zport) +{ + struct zs_scc *scc = zport->scc; + int irq; + unsigned long flags; + + spin_lock_irqsave(&scc->zlock, flags); + irq = !irqs_disabled_flags(flags); + if (!scc->initialised) { + /* Reset the pointer first, just in case... */ + read_zsreg(zport, R0); + /* And let the current transmission finish. */ + zs_line_drain(zport, irq); + write_zsreg(zport, R9, FHWRES); + udelay(10); + write_zsreg(zport, R9, 0); + scc->initialised = 1; + } + load_zsregs(zport, zport->regs, irq); + spin_unlock_irqrestore(&scc->zlock, flags); +} + +static void zs_set_termios(struct uart_port *uport, struct ktermios *termios, + struct ktermios *old_termios) +{ + struct zs_port *zport = to_zport(uport); + struct zs_scc *scc = zport->scc; + struct zs_port *zport_a = &scc->zport[ZS_CHAN_A]; + int irq; + unsigned int baud, brg; + unsigned long flags; + + spin_lock_irqsave(&scc->zlock, flags); + irq = !irqs_disabled_flags(flags); + + /* Byte size. */ + zport->regs[3] &= ~RxNBITS_MASK; + zport->regs[5] &= ~TxNBITS_MASK; + switch (termios->c_cflag & CSIZE) { + case CS5: + zport->regs[3] |= Rx5; + zport->regs[5] |= Tx5; + break; + case CS6: + zport->regs[3] |= Rx6; + zport->regs[5] |= Tx6; + break; + case CS7: + zport->regs[3] |= Rx7; + zport->regs[5] |= Tx7; + break; + case CS8: + default: + zport->regs[3] |= Rx8; + zport->regs[5] |= Tx8; + break; + } + + /* Parity and stop bits. */ + zport->regs[4] &= ~(XCLK_MASK | SB_MASK | PAR_ENA | PAR_EVEN); + if (termios->c_cflag & CSTOPB) + zport->regs[4] |= SB2; + else + zport->regs[4] |= SB1; + if (termios->c_cflag & PARENB) + zport->regs[4] |= PAR_ENA; + if (!(termios->c_cflag & PARODD)) + zport->regs[4] |= PAR_EVEN; + switch (zport->clk_mode) { + case 64: + zport->regs[4] |= X64CLK; + break; + case 32: + zport->regs[4] |= X32CLK; + break; + case 16: + zport->regs[4] |= X16CLK; + break; + case 1: + zport->regs[4] |= X1CLK; + break; + default: + BUG(); + } + + baud = uart_get_baud_rate(uport, termios, old_termios, 0, + uport->uartclk / zport->clk_mode / 4); + + brg = ZS_BPS_TO_BRG(baud, uport->uartclk / zport->clk_mode); + zport->regs[12] = brg & 0xff; + zport->regs[13] = (brg >> 8) & 0xff; + + uart_update_timeout(uport, termios->c_cflag, baud); + + uport->read_status_mask = Rx_OVR; + if (termios->c_iflag & INPCK) + uport->read_status_mask |= FRM_ERR | PAR_ERR; + if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) + uport->read_status_mask |= Rx_BRK; + + uport->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + uport->ignore_status_mask |= FRM_ERR | PAR_ERR; + if (termios->c_iflag & IGNBRK) { + uport->ignore_status_mask |= Rx_BRK; + if (termios->c_iflag & IGNPAR) + uport->ignore_status_mask |= Rx_OVR; + } + + if (termios->c_cflag & CREAD) + zport->regs[3] |= RxENABLE; + else + zport->regs[3] &= ~RxENABLE; + + if (zport != zport_a) { + if (!(termios->c_cflag & CLOCAL)) { + zport->regs[15] |= DCDIE; + } else + zport->regs[15] &= ~DCDIE; + if (termios->c_cflag & CRTSCTS) { + zport->regs[15] |= CTSIE; + } else + zport->regs[15] &= ~CTSIE; + zs_raw_xor_mctrl(zport); + } + + /* Load up the new values. */ + load_zsregs(zport, zport->regs, irq); + + spin_unlock_irqrestore(&scc->zlock, flags); +} + +/* + * Hack alert! + * Required solely so that the initial PROM-based console + * works undisturbed in parallel with this one. + */ +static void zs_pm(struct uart_port *uport, unsigned int state, + unsigned int oldstate) +{ + struct zs_port *zport = to_zport(uport); + + if (state < 3) + zport->regs[5] |= TxENAB; + else + zport->regs[5] &= ~TxENAB; + write_zsreg(zport, R5, zport->regs[5]); +} + + +static const char *zs_type(struct uart_port *uport) +{ + return "Z85C30 SCC"; +} + +static void zs_release_port(struct uart_port *uport) +{ + iounmap(uport->membase); + uport->membase = 0; + release_mem_region(uport->mapbase, ZS_CHAN_IO_SIZE); +} + +static int zs_map_port(struct uart_port *uport) +{ + if (!uport->membase) + uport->membase = ioremap(uport->mapbase, + ZS_CHAN_IO_SIZE); + if (!uport->membase) { + printk(KERN_ERR "zs: Cannot map MMIO\n"); + return -ENOMEM; + } + return 0; +} + +static int zs_request_port(struct uart_port *uport) +{ + int ret; + + if (!request_mem_region(uport->mapbase, ZS_CHAN_IO_SIZE, "scc")) { + printk(KERN_ERR "zs: Unable to reserve MMIO resource\n"); + return -EBUSY; + } + ret = zs_map_port(uport); + if (ret) { + release_mem_region(uport->mapbase, ZS_CHAN_IO_SIZE); + return ret; + } + return 0; +} + +static void zs_config_port(struct uart_port *uport, int flags) +{ + struct zs_port *zport = to_zport(uport); + + if (flags & UART_CONFIG_TYPE) { + if (zs_request_port(uport)) + return; + + uport->type = PORT_ZS; + + zs_reset(zport); + } +} + +static int zs_verify_port(struct uart_port *uport, struct serial_struct *ser) +{ + struct zs_port *zport = to_zport(uport); + int ret = 0; + + if (ser->type != PORT_UNKNOWN && ser->type != PORT_ZS) + ret = -EINVAL; + if (ser->irq != uport->irq) + ret = -EINVAL; + if (ser->baud_base != uport->uartclk / zport->clk_mode / 4) + ret = -EINVAL; + return ret; +} + + +static const struct uart_ops zs_ops = { + .tx_empty = zs_tx_empty, + .set_mctrl = zs_set_mctrl, + .get_mctrl = zs_get_mctrl, + .stop_tx = zs_stop_tx, + .start_tx = zs_start_tx, + .stop_rx = zs_stop_rx, + .enable_ms = zs_enable_ms, + .break_ctl = zs_break_ctl, + .startup = zs_startup, + .shutdown = zs_shutdown, + .set_termios = zs_set_termios, + .pm = zs_pm, + .type = zs_type, + .release_port = zs_release_port, + .request_port = zs_request_port, + .config_port = zs_config_port, + .verify_port = zs_verify_port, +}; + +/* + * Initialize Z85C30 port structures. + */ +static int __init zs_probe_sccs(void) +{ + static int probed; + struct zs_parms zs_parms; + int chip, side, irq; + int n_chips = 0; + int i; + + if (probed) + return 0; + + irq = dec_interrupt[DEC_IRQ_SCC0]; + if (irq >= 0) { + zs_parms.scc[n_chips] = IOASIC_SCC0; + zs_parms.irq[n_chips] = dec_interrupt[DEC_IRQ_SCC0]; + n_chips++; + } + irq = dec_interrupt[DEC_IRQ_SCC1]; + if (irq >= 0) { + zs_parms.scc[n_chips] = IOASIC_SCC1; + zs_parms.irq[n_chips] = dec_interrupt[DEC_IRQ_SCC1]; + n_chips++; + } + if (!n_chips) + return -ENXIO; + + probed = 1; + + for (chip = 0; chip < n_chips; chip++) { + spin_lock_init(&zs_sccs[chip].zlock); + for (side = 0; side < ZS_NUM_CHAN; side++) { + struct zs_port *zport = &zs_sccs[chip].zport[side]; + struct uart_port *uport = &zport->port; + + zport->scc = &zs_sccs[chip]; + zport->clk_mode = 16; + + uport->has_sysrq = IS_ENABLED(CONFIG_SERIAL_ZS_CONSOLE); + uport->irq = zs_parms.irq[chip]; + uport->uartclk = ZS_CLOCK; + uport->fifosize = 1; + uport->iotype = UPIO_MEM; + uport->flags = UPF_BOOT_AUTOCONF; + uport->ops = &zs_ops; + uport->line = chip * ZS_NUM_CHAN + side; + uport->mapbase = dec_kn_slot_base + + zs_parms.scc[chip] + + (side ^ ZS_CHAN_B) * ZS_CHAN_IO_SIZE; + + for (i = 0; i < ZS_NUM_REGS; i++) + zport->regs[i] = zs_init_regs[i]; + } + } + + return 0; +} + + +#ifdef CONFIG_SERIAL_ZS_CONSOLE +static void zs_console_putchar(struct uart_port *uport, int ch) +{ + struct zs_port *zport = to_zport(uport); + struct zs_scc *scc = zport->scc; + int irq; + unsigned long flags; + + spin_lock_irqsave(&scc->zlock, flags); + irq = !irqs_disabled_flags(flags); + if (zs_transmit_drain(zport, irq)) + write_zsdata(zport, ch); + spin_unlock_irqrestore(&scc->zlock, flags); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + */ +static void zs_console_write(struct console *co, const char *s, + unsigned int count) +{ + int chip = co->index / ZS_NUM_CHAN, side = co->index % ZS_NUM_CHAN; + struct zs_port *zport = &zs_sccs[chip].zport[side]; + struct zs_scc *scc = zport->scc; + unsigned long flags; + u8 txint, txenb; + int irq; + + /* Disable transmit interrupts and enable the transmitter. */ + spin_lock_irqsave(&scc->zlock, flags); + txint = zport->regs[1]; + txenb = zport->regs[5]; + if (txint & TxINT_ENAB) { + zport->regs[1] = txint & ~TxINT_ENAB; + write_zsreg(zport, R1, zport->regs[1]); + } + if (!(txenb & TxENAB)) { + zport->regs[5] = txenb | TxENAB; + write_zsreg(zport, R5, zport->regs[5]); + } + spin_unlock_irqrestore(&scc->zlock, flags); + + uart_console_write(&zport->port, s, count, zs_console_putchar); + + /* Restore transmit interrupts and the transmitter enable. */ + spin_lock_irqsave(&scc->zlock, flags); + irq = !irqs_disabled_flags(flags); + zs_line_drain(zport, irq); + if (!(txenb & TxENAB)) { + zport->regs[5] &= ~TxENAB; + write_zsreg(zport, R5, zport->regs[5]); + } + if (txint & TxINT_ENAB) { + zport->regs[1] |= TxINT_ENAB; + write_zsreg(zport, R1, zport->regs[1]); + + /* Resume any transmission as the TxIP bit won't be set. */ + if (!zport->tx_stopped) + zs_raw_transmit_chars(zport); + } + spin_unlock_irqrestore(&scc->zlock, flags); +} + +/* + * Setup serial console baud/bits/parity. We do two things here: + * - construct a cflag setting for the first uart_open() + * - initialise the serial port + * Return non-zero if we didn't find a serial port. + */ +static int __init zs_console_setup(struct console *co, char *options) +{ + int chip = co->index / ZS_NUM_CHAN, side = co->index % ZS_NUM_CHAN; + struct zs_port *zport = &zs_sccs[chip].zport[side]; + struct uart_port *uport = &zport->port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + int ret; + + ret = zs_map_port(uport); + if (ret) + return ret; + + zs_reset(zport); + zs_pm(uport, 0, -1); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + return uart_set_options(uport, co, baud, parity, bits, flow); +} + +static struct uart_driver zs_reg; +static struct console zs_console = { + .name = "ttyS", + .write = zs_console_write, + .device = uart_console_device, + .setup = zs_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &zs_reg, +}; + +/* + * Register console. + */ +static int __init zs_serial_console_init(void) +{ + int ret; + + ret = zs_probe_sccs(); + if (ret) + return ret; + register_console(&zs_console); + + return 0; +} + +console_initcall(zs_serial_console_init); + +#define SERIAL_ZS_CONSOLE &zs_console +#else +#define SERIAL_ZS_CONSOLE NULL +#endif /* CONFIG_SERIAL_ZS_CONSOLE */ + +static struct uart_driver zs_reg = { + .owner = THIS_MODULE, + .driver_name = "serial", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .nr = ZS_NUM_SCCS * ZS_NUM_CHAN, + .cons = SERIAL_ZS_CONSOLE, +}; + +/* zs_init inits the driver. */ +static int __init zs_init(void) +{ + int i, ret; + + pr_info("%s%s\n", zs_name, zs_version); + + /* Find out how many Z85C30 SCCs we have. */ + ret = zs_probe_sccs(); + if (ret) + return ret; + + ret = uart_register_driver(&zs_reg); + if (ret) + return ret; + + for (i = 0; i < ZS_NUM_SCCS * ZS_NUM_CHAN; i++) { + struct zs_scc *scc = &zs_sccs[i / ZS_NUM_CHAN]; + struct zs_port *zport = &scc->zport[i % ZS_NUM_CHAN]; + struct uart_port *uport = &zport->port; + + if (zport->scc) + uart_add_one_port(&zs_reg, uport); + } + + return 0; +} + +static void __exit zs_exit(void) +{ + int i; + + for (i = ZS_NUM_SCCS * ZS_NUM_CHAN - 1; i >= 0; i--) { + struct zs_scc *scc = &zs_sccs[i / ZS_NUM_CHAN]; + struct zs_port *zport = &scc->zport[i % ZS_NUM_CHAN]; + struct uart_port *uport = &zport->port; + + if (zport->scc) + uart_remove_one_port(&zs_reg, uport); + } + + uart_unregister_driver(&zs_reg); +} + +module_init(zs_init); +module_exit(zs_exit); diff --git a/drivers/tty/serial/zs.h b/drivers/tty/serial/zs.h new file mode 100644 index 000000000..26ef8eafa --- /dev/null +++ b/drivers/tty/serial/zs.h @@ -0,0 +1,285 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * zs.h: Definitions for the DECstation Z85C30 serial driver. + * + * Adapted from drivers/sbus/char/sunserial.h by Paul Mackerras. + * Adapted from drivers/macintosh/macserial.h by Harald Koerfgen. + * + * Copyright (C) 1996 Paul Mackerras (Paul.Mackerras@cs.anu.edu.au) + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + * Copyright (C) 2004, 2005, 2007 Maciej W. Rozycki + */ +#ifndef _SERIAL_ZS_H +#define _SERIAL_ZS_H + +#ifdef __KERNEL__ + +#define ZS_NUM_REGS 16 + +/* + * This is our internal structure for each serial port's state. + */ +struct zs_port { + struct zs_scc *scc; /* Containing SCC. */ + struct uart_port port; /* Underlying UART. */ + + int clk_mode; /* May be 1, 16, 32, or 64. */ + + unsigned int tty_break; /* Set on BREAK condition. */ + int tx_stopped; /* Output is suspended. */ + + unsigned int mctrl; /* State of modem lines. */ + u8 brk; /* BREAK state from RR0. */ + + u8 regs[ZS_NUM_REGS]; /* Channel write registers. */ +}; + +/* + * Per-SCC state for locking and the interrupt handler. + */ +struct zs_scc { + struct zs_port zport[2]; + spinlock_t zlock; + atomic_t irq_guard; + int initialised; +}; + +#endif /* __KERNEL__ */ + +/* + * Conversion routines to/from brg time constants from/to bits per second. + */ +#define ZS_BRG_TO_BPS(brg, freq) ((freq) / 2 / ((brg) + 2)) +#define ZS_BPS_TO_BRG(bps, freq) ((((freq) + (bps)) / (2 * (bps))) - 2) + +/* + * The Zilog register set. + */ + +/* Write Register 0 (Command) */ +#define R0 0 /* Register selects */ +#define R1 1 +#define R2 2 +#define R3 3 +#define R4 4 +#define R5 5 +#define R6 6 +#define R7 7 +#define R8 8 +#define R9 9 +#define R10 10 +#define R11 11 +#define R12 12 +#define R13 13 +#define R14 14 +#define R15 15 + +#define NULLCODE 0 /* Null Code */ +#define POINT_HIGH 0x8 /* Select upper half of registers */ +#define RES_EXT_INT 0x10 /* Reset Ext. Status Interrupts */ +#define SEND_ABORT 0x18 /* HDLC Abort */ +#define RES_RxINT_FC 0x20 /* Reset RxINT on First Character */ +#define RES_Tx_P 0x28 /* Reset TxINT Pending */ +#define ERR_RES 0x30 /* Error Reset */ +#define RES_H_IUS 0x38 /* Reset highest IUS */ + +#define RES_Rx_CRC 0x40 /* Reset Rx CRC Checker */ +#define RES_Tx_CRC 0x80 /* Reset Tx CRC Checker */ +#define RES_EOM_L 0xC0 /* Reset EOM latch */ + +/* Write Register 1 (Tx/Rx/Ext Int Enable and WAIT/DMA Commands) */ +#define EXT_INT_ENAB 0x1 /* Ext Int Enable */ +#define TxINT_ENAB 0x2 /* Tx Int Enable */ +#define PAR_SPEC 0x4 /* Parity is special condition */ + +#define RxINT_DISAB 0 /* Rx Int Disable */ +#define RxINT_FCERR 0x8 /* Rx Int on First Character Only or Error */ +#define RxINT_ALL 0x10 /* Int on all Rx Characters or error */ +#define RxINT_ERR 0x18 /* Int on error only */ +#define RxINT_MASK 0x18 + +#define WT_RDY_RT 0x20 /* Wait/Ready on R/T */ +#define WT_FN_RDYFN 0x40 /* Wait/FN/Ready FN */ +#define WT_RDY_ENAB 0x80 /* Wait/Ready Enable */ + +/* Write Register 2 (Interrupt Vector) */ + +/* Write Register 3 (Receive Parameters and Control) */ +#define RxENABLE 0x1 /* Rx Enable */ +#define SYNC_L_INH 0x2 /* Sync Character Load Inhibit */ +#define ADD_SM 0x4 /* Address Search Mode (SDLC) */ +#define RxCRC_ENAB 0x8 /* Rx CRC Enable */ +#define ENT_HM 0x10 /* Enter Hunt Mode */ +#define AUTO_ENAB 0x20 /* Auto Enables */ +#define Rx5 0x0 /* Rx 5 Bits/Character */ +#define Rx7 0x40 /* Rx 7 Bits/Character */ +#define Rx6 0x80 /* Rx 6 Bits/Character */ +#define Rx8 0xc0 /* Rx 8 Bits/Character */ +#define RxNBITS_MASK 0xc0 + +/* Write Register 4 (Transmit/Receive Miscellaneous Parameters and Modes) */ +#define PAR_ENA 0x1 /* Parity Enable */ +#define PAR_EVEN 0x2 /* Parity Even/Odd* */ + +#define SYNC_ENAB 0 /* Sync Modes Enable */ +#define SB1 0x4 /* 1 stop bit/char */ +#define SB15 0x8 /* 1.5 stop bits/char */ +#define SB2 0xc /* 2 stop bits/char */ +#define SB_MASK 0xc + +#define MONSYNC 0 /* 8 Bit Sync character */ +#define BISYNC 0x10 /* 16 bit sync character */ +#define SDLC 0x20 /* SDLC Mode (01111110 Sync Flag) */ +#define EXTSYNC 0x30 /* External Sync Mode */ + +#define X1CLK 0x0 /* x1 clock mode */ +#define X16CLK 0x40 /* x16 clock mode */ +#define X32CLK 0x80 /* x32 clock mode */ +#define X64CLK 0xc0 /* x64 clock mode */ +#define XCLK_MASK 0xc0 + +/* Write Register 5 (Transmit Parameters and Controls) */ +#define TxCRC_ENAB 0x1 /* Tx CRC Enable */ +#define RTS 0x2 /* RTS */ +#define SDLC_CRC 0x4 /* SDLC/CRC-16 */ +#define TxENAB 0x8 /* Tx Enable */ +#define SND_BRK 0x10 /* Send Break */ +#define Tx5 0x0 /* Tx 5 bits (or less)/character */ +#define Tx7 0x20 /* Tx 7 bits/character */ +#define Tx6 0x40 /* Tx 6 bits/character */ +#define Tx8 0x60 /* Tx 8 bits/character */ +#define TxNBITS_MASK 0x60 +#define DTR 0x80 /* DTR */ + +/* Write Register 6 (Sync bits 0-7/SDLC Address Field) */ + +/* Write Register 7 (Sync bits 8-15/SDLC 01111110) */ + +/* Write Register 8 (Transmit Buffer) */ + +/* Write Register 9 (Master Interrupt Control) */ +#define VIS 1 /* Vector Includes Status */ +#define NV 2 /* No Vector */ +#define DLC 4 /* Disable Lower Chain */ +#define MIE 8 /* Master Interrupt Enable */ +#define STATHI 0x10 /* Status high */ +#define SOFTACK 0x20 /* Software Interrupt Acknowledge */ +#define NORESET 0 /* No reset on write to R9 */ +#define CHRB 0x40 /* Reset channel B */ +#define CHRA 0x80 /* Reset channel A */ +#define FHWRES 0xc0 /* Force hardware reset */ + +/* Write Register 10 (Miscellaneous Transmitter/Receiver Control Bits) */ +#define BIT6 1 /* 6 bit/8bit sync */ +#define LOOPMODE 2 /* SDLC Loop mode */ +#define ABUNDER 4 /* Abort/flag on SDLC xmit underrun */ +#define MARKIDLE 8 /* Mark/flag on idle */ +#define GAOP 0x10 /* Go active on poll */ +#define NRZ 0 /* NRZ mode */ +#define NRZI 0x20 /* NRZI mode */ +#define FM1 0x40 /* FM1 (transition = 1) */ +#define FM0 0x60 /* FM0 (transition = 0) */ +#define CRCPS 0x80 /* CRC Preset I/O */ + +/* Write Register 11 (Clock Mode Control) */ +#define TRxCXT 0 /* TRxC = Xtal output */ +#define TRxCTC 1 /* TRxC = Transmit clock */ +#define TRxCBR 2 /* TRxC = BR Generator Output */ +#define TRxCDP 3 /* TRxC = DPLL output */ +#define TRxCOI 4 /* TRxC O/I */ +#define TCRTxCP 0 /* Transmit clock = RTxC pin */ +#define TCTRxCP 8 /* Transmit clock = TRxC pin */ +#define TCBR 0x10 /* Transmit clock = BR Generator output */ +#define TCDPLL 0x18 /* Transmit clock = DPLL output */ +#define RCRTxCP 0 /* Receive clock = RTxC pin */ +#define RCTRxCP 0x20 /* Receive clock = TRxC pin */ +#define RCBR 0x40 /* Receive clock = BR Generator output */ +#define RCDPLL 0x60 /* Receive clock = DPLL output */ +#define RTxCX 0x80 /* RTxC Xtal/No Xtal */ + +/* Write Register 12 (Lower Byte of Baud Rate Generator Time Constant) */ + +/* Write Register 13 (Upper Byte of Baud Rate Generator Time Constant) */ + +/* Write Register 14 (Miscellaneous Control Bits) */ +#define BRENABL 1 /* Baud rate generator enable */ +#define BRSRC 2 /* Baud rate generator source */ +#define DTRREQ 4 /* DTR/Request function */ +#define AUTOECHO 8 /* Auto Echo */ +#define LOOPBAK 0x10 /* Local loopback */ +#define SEARCH 0x20 /* Enter search mode */ +#define RMC 0x40 /* Reset missing clock */ +#define DISDPLL 0x60 /* Disable DPLL */ +#define SSBR 0x80 /* Set DPLL source = BR generator */ +#define SSRTxC 0xa0 /* Set DPLL source = RTxC */ +#define SFMM 0xc0 /* Set FM mode */ +#define SNRZI 0xe0 /* Set NRZI mode */ + +/* Write Register 15 (External/Status Interrupt Control) */ +#define WR7P_EN 1 /* WR7 Prime SDLC Feature Enable */ +#define ZCIE 2 /* Zero count IE */ +#define DCDIE 8 /* DCD IE */ +#define SYNCIE 0x10 /* Sync/hunt IE */ +#define CTSIE 0x20 /* CTS IE */ +#define TxUIE 0x40 /* Tx Underrun/EOM IE */ +#define BRKIE 0x80 /* Break/Abort IE */ + + +/* Read Register 0 (Transmit/Receive Buffer Status and External Status) */ +#define Rx_CH_AV 0x1 /* Rx Character Available */ +#define ZCOUNT 0x2 /* Zero count */ +#define Tx_BUF_EMP 0x4 /* Tx Buffer empty */ +#define DCD 0x8 /* DCD */ +#define SYNC_HUNT 0x10 /* Sync/hunt */ +#define CTS 0x20 /* CTS */ +#define TxEOM 0x40 /* Tx underrun */ +#define BRK_ABRT 0x80 /* Break/Abort */ + +/* Read Register 1 (Special Receive Condition Status) */ +#define ALL_SNT 0x1 /* All sent */ +/* Residue Data for 8 Rx bits/char programmed */ +#define RES3 0x8 /* 0/3 */ +#define RES4 0x4 /* 0/4 */ +#define RES5 0xc /* 0/5 */ +#define RES6 0x2 /* 0/6 */ +#define RES7 0xa /* 0/7 */ +#define RES8 0x6 /* 0/8 */ +#define RES18 0xe /* 1/8 */ +#define RES28 0x0 /* 2/8 */ +/* Special Rx Condition Interrupts */ +#define PAR_ERR 0x10 /* Parity Error */ +#define Rx_OVR 0x20 /* Rx Overrun Error */ +#define FRM_ERR 0x40 /* CRC/Framing Error */ +#define END_FR 0x80 /* End of Frame (SDLC) */ + +/* Read Register 2 (Interrupt Vector (WR2) -- channel A). */ + +/* Read Register 2 (Modified Interrupt Vector -- channel B). */ + +/* Read Register 3 (Interrupt Pending Bits -- channel A only). */ +#define CHBEXT 0x1 /* Channel B Ext/Stat IP */ +#define CHBTxIP 0x2 /* Channel B Tx IP */ +#define CHBRxIP 0x4 /* Channel B Rx IP */ +#define CHAEXT 0x8 /* Channel A Ext/Stat IP */ +#define CHATxIP 0x10 /* Channel A Tx IP */ +#define CHARxIP 0x20 /* Channel A Rx IP */ + +/* Read Register 6 (SDLC FIFO Status and Byte Count LSB) */ + +/* Read Register 7 (SDLC FIFO Status and Byte Count MSB) */ + +/* Read Register 8 (Receive Data) */ + +/* Read Register 10 (Miscellaneous Status Bits) */ +#define ONLOOP 2 /* On loop */ +#define LOOPSEND 0x10 /* Loop sending */ +#define CLK2MIS 0x40 /* Two clocks missing */ +#define CLK1MIS 0x80 /* One clock missing */ + +/* Read Register 12 (Lower Byte of Baud Rate Generator Constant (WR12)) */ + +/* Read Register 13 (Upper Byte of Baud Rate Generator Constant (WR13) */ + +/* Read Register 15 (External/Status Interrupt Control (WR15)) */ + +#endif /* _SERIAL_ZS_H */ diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c new file mode 100644 index 000000000..c8324d58e --- /dev/null +++ b/drivers/tty/synclink.c @@ -0,0 +1,7898 @@ +// SPDX-License-Identifier: GPL-1.0+ +/* + * $Id: synclink.c,v 4.38 2005/11/07 16:30:34 paulkf Exp $ + * + * Device driver for Microgate SyncLink ISA and PCI + * high speed multiprotocol serial adapters. + * + * written by Paul Fulghum for Microgate Corporation + * paulkf@microgate.com + * + * Microgate and SyncLink are trademarks of Microgate Corporation + * + * Derived from serial.c written by Theodore Ts'o and Linus Torvalds + * + * Original release 01/11/99 + * + * This driver is primarily intended for use in synchronous + * HDLC mode. Asynchronous mode is also provided. + * + * When operating in synchronous mode, each call to mgsl_write() + * contains exactly one complete HDLC frame. Calling mgsl_put_char + * will start assembling an HDLC frame that will not be sent until + * mgsl_flush_chars or mgsl_write is called. + * + * Synchronous receive data is reported as complete frames. To accomplish + * this, the TTY flip buffer is bypassed (too small to hold largest + * frame and may fragment frames) and the line discipline + * receive entry point is called directly. + * + * This driver has been tested with a slightly modified ppp.c driver + * for synchronous PPP. + * + * 2000/02/16 + * Added interface for syncppp.c driver (an alternate synchronous PPP + * implementation that also supports Cisco HDLC). Each device instance + * registers as a tty device AND a network device (if dosyncppp option + * is set for the device). The functionality is determined by which + * device interface is opened. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#if defined(__i386__) +# define BREAKPOINT() asm(" int $3"); +#else +# define BREAKPOINT() { } +#endif + +#define MAX_ISA_DEVICES 10 +#define MAX_PCI_DEVICES 10 +#define MAX_TOTAL_DEVICES 20 + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINK_MODULE)) +#define SYNCLINK_GENERIC_HDLC 1 +#else +#define SYNCLINK_GENERIC_HDLC 0 +#endif + +#define GET_USER(error,value,addr) error = get_user(value,addr) +#define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0 +#define PUT_USER(error,value,addr) error = put_user(value,addr) +#define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0 + +#include + +#define RCLRVALUE 0xffff + +static MGSL_PARAMS default_params = { + MGSL_MODE_HDLC, /* unsigned long mode */ + 0, /* unsigned char loopback; */ + HDLC_FLAG_UNDERRUN_ABORT15, /* unsigned short flags; */ + HDLC_ENCODING_NRZI_SPACE, /* unsigned char encoding; */ + 0, /* unsigned long clock_speed; */ + 0xff, /* unsigned char addr_filter; */ + HDLC_CRC_16_CCITT, /* unsigned short crc_type; */ + HDLC_PREAMBLE_LENGTH_8BITS, /* unsigned char preamble_length; */ + HDLC_PREAMBLE_PATTERN_NONE, /* unsigned char preamble; */ + 9600, /* unsigned long data_rate; */ + 8, /* unsigned char data_bits; */ + 1, /* unsigned char stop_bits; */ + ASYNC_PARITY_NONE /* unsigned char parity; */ +}; + +#define SHARED_MEM_ADDRESS_SIZE 0x40000 +#define BUFFERLISTSIZE 4096 +#define DMABUFFERSIZE 4096 +#define MAXRXFRAMES 7 + +typedef struct _DMABUFFERENTRY +{ + u32 phys_addr; /* 32-bit flat physical address of data buffer */ + volatile u16 count; /* buffer size/data count */ + volatile u16 status; /* Control/status field */ + volatile u16 rcc; /* character count field */ + u16 reserved; /* padding required by 16C32 */ + u32 link; /* 32-bit flat link to next buffer entry */ + char *virt_addr; /* virtual address of data buffer */ + u32 phys_entry; /* physical address of this buffer entry */ + dma_addr_t dma_addr; +} DMABUFFERENTRY, *DMAPBUFFERENTRY; + +/* The queue of BH actions to be performed */ + +#define BH_RECEIVE 1 +#define BH_TRANSMIT 2 +#define BH_STATUS 4 + +#define IO_PIN_SHUTDOWN_LIMIT 100 + +struct _input_signal_events { + int ri_up; + int ri_down; + int dsr_up; + int dsr_down; + int dcd_up; + int dcd_down; + int cts_up; + int cts_down; +}; + +/* transmit holding buffer definitions*/ +#define MAX_TX_HOLDING_BUFFERS 5 +struct tx_holding_buffer { + int buffer_size; + unsigned char * buffer; +}; + + +/* + * Device instance data structure + */ + +struct mgsl_struct { + int magic; + struct tty_port port; + int line; + int hw_version; + + struct mgsl_icount icount; + + int timeout; + int x_char; /* xon/xoff character */ + u16 read_status_mask; + u16 ignore_status_mask; + unsigned char *xmit_buf; + int xmit_head; + int xmit_tail; + int xmit_cnt; + + wait_queue_head_t status_event_wait_q; + wait_queue_head_t event_wait_q; + struct timer_list tx_timer; /* HDLC transmit timeout timer */ + struct mgsl_struct *next_device; /* device list link */ + + spinlock_t irq_spinlock; /* spinlock for synchronizing with ISR */ + struct work_struct task; /* task structure for scheduling bh */ + + u32 EventMask; /* event trigger mask */ + u32 RecordedEvents; /* pending events */ + + u32 max_frame_size; /* as set by device config */ + + u32 pending_bh; + + bool bh_running; /* Protection from multiple */ + int isr_overflow; + bool bh_requested; + + int dcd_chkcount; /* check counts to prevent */ + int cts_chkcount; /* too many IRQs if a signal */ + int dsr_chkcount; /* is floating */ + int ri_chkcount; + + char *buffer_list; /* virtual address of Rx & Tx buffer lists */ + u32 buffer_list_phys; + dma_addr_t buffer_list_dma_addr; + + unsigned int rx_buffer_count; /* count of total allocated Rx buffers */ + DMABUFFERENTRY *rx_buffer_list; /* list of receive buffer entries */ + unsigned int current_rx_buffer; + + int num_tx_dma_buffers; /* number of tx dma frames required */ + int tx_dma_buffers_used; + unsigned int tx_buffer_count; /* count of total allocated Tx buffers */ + DMABUFFERENTRY *tx_buffer_list; /* list of transmit buffer entries */ + int start_tx_dma_buffer; /* tx dma buffer to start tx dma operation */ + int current_tx_buffer; /* next tx dma buffer to be loaded */ + + unsigned char *intermediate_rxbuffer; + + int num_tx_holding_buffers; /* number of tx holding buffer allocated */ + int get_tx_holding_index; /* next tx holding buffer for adapter to load */ + int put_tx_holding_index; /* next tx holding buffer to store user request */ + int tx_holding_count; /* number of tx holding buffers waiting */ + struct tx_holding_buffer tx_holding_buffers[MAX_TX_HOLDING_BUFFERS]; + + bool rx_enabled; + bool rx_overflow; + bool rx_rcc_underrun; + + bool tx_enabled; + bool tx_active; + u32 idle_mode; + + u16 cmr_value; + u16 tcsr_value; + + char device_name[25]; /* device instance name */ + + unsigned char bus; /* expansion bus number (zero based) */ + unsigned char function; /* PCI device number */ + + unsigned int io_base; /* base I/O address of adapter */ + unsigned int io_addr_size; /* size of the I/O address range */ + bool io_addr_requested; /* true if I/O address requested */ + + unsigned int irq_level; /* interrupt level */ + unsigned long irq_flags; + bool irq_requested; /* true if IRQ requested */ + + unsigned int dma_level; /* DMA channel */ + bool dma_requested; /* true if dma channel requested */ + + u16 mbre_bit; + u16 loopback_bits; + u16 usc_idle_mode; + + MGSL_PARAMS params; /* communications parameters */ + + unsigned char serial_signals; /* current serial signal states */ + + bool irq_occurred; /* for diagnostics use */ + unsigned int init_error; /* Initialization startup error (DIAGS) */ + int fDiagnosticsmode; /* Driver in Diagnostic mode? (DIAGS) */ + + u32 last_mem_alloc; + unsigned char* memory_base; /* shared memory address (PCI only) */ + u32 phys_memory_base; + bool shared_mem_requested; + + unsigned char* lcr_base; /* local config registers (PCI only) */ + u32 phys_lcr_base; + u32 lcr_offset; + bool lcr_mem_requested; + + u32 misc_ctrl_value; + char *flag_buf; + bool drop_rts_on_tx_done; + + bool loopmode_insert_requested; + bool loopmode_send_done_requested; + + struct _input_signal_events input_signal_events; + + /* generic HDLC device parts */ + int netcount; + spinlock_t netlock; + +#if SYNCLINK_GENERIC_HDLC + struct net_device *netdev; +#endif +}; + +#define MGSL_MAGIC 0x5401 + +/* + * The size of the serial xmit buffer is 1 page, or 4096 bytes + */ +#ifndef SERIAL_XMIT_SIZE +#define SERIAL_XMIT_SIZE 4096 +#endif + +/* + * These macros define the offsets used in calculating the + * I/O address of the specified USC registers. + */ + + +#define DCPIN 2 /* Bit 1 of I/O address */ +#define SDPIN 4 /* Bit 2 of I/O address */ + +#define DCAR 0 /* DMA command/address register */ +#define CCAR SDPIN /* channel command/address register */ +#define DATAREG DCPIN + SDPIN /* serial data register */ +#define MSBONLY 0x41 +#define LSBONLY 0x40 + +/* + * These macros define the register address (ordinal number) + * used for writing address/value pairs to the USC. + */ + +#define CMR 0x02 /* Channel mode Register */ +#define CCSR 0x04 /* Channel Command/status Register */ +#define CCR 0x06 /* Channel Control Register */ +#define PSR 0x08 /* Port status Register */ +#define PCR 0x0a /* Port Control Register */ +#define TMDR 0x0c /* Test mode Data Register */ +#define TMCR 0x0e /* Test mode Control Register */ +#define CMCR 0x10 /* Clock mode Control Register */ +#define HCR 0x12 /* Hardware Configuration Register */ +#define IVR 0x14 /* Interrupt Vector Register */ +#define IOCR 0x16 /* Input/Output Control Register */ +#define ICR 0x18 /* Interrupt Control Register */ +#define DCCR 0x1a /* Daisy Chain Control Register */ +#define MISR 0x1c /* Misc Interrupt status Register */ +#define SICR 0x1e /* status Interrupt Control Register */ +#define RDR 0x20 /* Receive Data Register */ +#define RMR 0x22 /* Receive mode Register */ +#define RCSR 0x24 /* Receive Command/status Register */ +#define RICR 0x26 /* Receive Interrupt Control Register */ +#define RSR 0x28 /* Receive Sync Register */ +#define RCLR 0x2a /* Receive count Limit Register */ +#define RCCR 0x2c /* Receive Character count Register */ +#define TC0R 0x2e /* Time Constant 0 Register */ +#define TDR 0x30 /* Transmit Data Register */ +#define TMR 0x32 /* Transmit mode Register */ +#define TCSR 0x34 /* Transmit Command/status Register */ +#define TICR 0x36 /* Transmit Interrupt Control Register */ +#define TSR 0x38 /* Transmit Sync Register */ +#define TCLR 0x3a /* Transmit count Limit Register */ +#define TCCR 0x3c /* Transmit Character count Register */ +#define TC1R 0x3e /* Time Constant 1 Register */ + + +/* + * MACRO DEFINITIONS FOR DMA REGISTERS + */ + +#define DCR 0x06 /* DMA Control Register (shared) */ +#define DACR 0x08 /* DMA Array count Register (shared) */ +#define BDCR 0x12 /* Burst/Dwell Control Register (shared) */ +#define DIVR 0x14 /* DMA Interrupt Vector Register (shared) */ +#define DICR 0x18 /* DMA Interrupt Control Register (shared) */ +#define CDIR 0x1a /* Clear DMA Interrupt Register (shared) */ +#define SDIR 0x1c /* Set DMA Interrupt Register (shared) */ + +#define TDMR 0x02 /* Transmit DMA mode Register */ +#define TDIAR 0x1e /* Transmit DMA Interrupt Arm Register */ +#define TBCR 0x2a /* Transmit Byte count Register */ +#define TARL 0x2c /* Transmit Address Register (low) */ +#define TARU 0x2e /* Transmit Address Register (high) */ +#define NTBCR 0x3a /* Next Transmit Byte count Register */ +#define NTARL 0x3c /* Next Transmit Address Register (low) */ +#define NTARU 0x3e /* Next Transmit Address Register (high) */ + +#define RDMR 0x82 /* Receive DMA mode Register (non-shared) */ +#define RDIAR 0x9e /* Receive DMA Interrupt Arm Register */ +#define RBCR 0xaa /* Receive Byte count Register */ +#define RARL 0xac /* Receive Address Register (low) */ +#define RARU 0xae /* Receive Address Register (high) */ +#define NRBCR 0xba /* Next Receive Byte count Register */ +#define NRARL 0xbc /* Next Receive Address Register (low) */ +#define NRARU 0xbe /* Next Receive Address Register (high) */ + + +/* + * MACRO DEFINITIONS FOR MODEM STATUS BITS + */ + +#define MODEMSTATUS_DTR 0x80 +#define MODEMSTATUS_DSR 0x40 +#define MODEMSTATUS_RTS 0x20 +#define MODEMSTATUS_CTS 0x10 +#define MODEMSTATUS_RI 0x04 +#define MODEMSTATUS_DCD 0x01 + + +/* + * Channel Command/Address Register (CCAR) Command Codes + */ + +#define RTCmd_Null 0x0000 +#define RTCmd_ResetHighestIus 0x1000 +#define RTCmd_TriggerChannelLoadDma 0x2000 +#define RTCmd_TriggerRxDma 0x2800 +#define RTCmd_TriggerTxDma 0x3000 +#define RTCmd_TriggerRxAndTxDma 0x3800 +#define RTCmd_PurgeRxFifo 0x4800 +#define RTCmd_PurgeTxFifo 0x5000 +#define RTCmd_PurgeRxAndTxFifo 0x5800 +#define RTCmd_LoadRcc 0x6800 +#define RTCmd_LoadTcc 0x7000 +#define RTCmd_LoadRccAndTcc 0x7800 +#define RTCmd_LoadTC0 0x8800 +#define RTCmd_LoadTC1 0x9000 +#define RTCmd_LoadTC0AndTC1 0x9800 +#define RTCmd_SerialDataLSBFirst 0xa000 +#define RTCmd_SerialDataMSBFirst 0xa800 +#define RTCmd_SelectBigEndian 0xb000 +#define RTCmd_SelectLittleEndian 0xb800 + + +/* + * DMA Command/Address Register (DCAR) Command Codes + */ + +#define DmaCmd_Null 0x0000 +#define DmaCmd_ResetTxChannel 0x1000 +#define DmaCmd_ResetRxChannel 0x1200 +#define DmaCmd_StartTxChannel 0x2000 +#define DmaCmd_StartRxChannel 0x2200 +#define DmaCmd_ContinueTxChannel 0x3000 +#define DmaCmd_ContinueRxChannel 0x3200 +#define DmaCmd_PauseTxChannel 0x4000 +#define DmaCmd_PauseRxChannel 0x4200 +#define DmaCmd_AbortTxChannel 0x5000 +#define DmaCmd_AbortRxChannel 0x5200 +#define DmaCmd_InitTxChannel 0x7000 +#define DmaCmd_InitRxChannel 0x7200 +#define DmaCmd_ResetHighestDmaIus 0x8000 +#define DmaCmd_ResetAllChannels 0x9000 +#define DmaCmd_StartAllChannels 0xa000 +#define DmaCmd_ContinueAllChannels 0xb000 +#define DmaCmd_PauseAllChannels 0xc000 +#define DmaCmd_AbortAllChannels 0xd000 +#define DmaCmd_InitAllChannels 0xf000 + +#define TCmd_Null 0x0000 +#define TCmd_ClearTxCRC 0x2000 +#define TCmd_SelectTicrTtsaData 0x4000 +#define TCmd_SelectTicrTxFifostatus 0x5000 +#define TCmd_SelectTicrIntLevel 0x6000 +#define TCmd_SelectTicrdma_level 0x7000 +#define TCmd_SendFrame 0x8000 +#define TCmd_SendAbort 0x9000 +#define TCmd_EnableDleInsertion 0xc000 +#define TCmd_DisableDleInsertion 0xd000 +#define TCmd_ClearEofEom 0xe000 +#define TCmd_SetEofEom 0xf000 + +#define RCmd_Null 0x0000 +#define RCmd_ClearRxCRC 0x2000 +#define RCmd_EnterHuntmode 0x3000 +#define RCmd_SelectRicrRtsaData 0x4000 +#define RCmd_SelectRicrRxFifostatus 0x5000 +#define RCmd_SelectRicrIntLevel 0x6000 +#define RCmd_SelectRicrdma_level 0x7000 + +/* + * Bits for enabling and disabling IRQs in Interrupt Control Register (ICR) + */ + +#define RECEIVE_STATUS BIT5 +#define RECEIVE_DATA BIT4 +#define TRANSMIT_STATUS BIT3 +#define TRANSMIT_DATA BIT2 +#define IO_PIN BIT1 +#define MISC BIT0 + + +/* + * Receive status Bits in Receive Command/status Register RCSR + */ + +#define RXSTATUS_SHORT_FRAME BIT8 +#define RXSTATUS_CODE_VIOLATION BIT8 +#define RXSTATUS_EXITED_HUNT BIT7 +#define RXSTATUS_IDLE_RECEIVED BIT6 +#define RXSTATUS_BREAK_RECEIVED BIT5 +#define RXSTATUS_ABORT_RECEIVED BIT5 +#define RXSTATUS_RXBOUND BIT4 +#define RXSTATUS_CRC_ERROR BIT3 +#define RXSTATUS_FRAMING_ERROR BIT3 +#define RXSTATUS_ABORT BIT2 +#define RXSTATUS_PARITY_ERROR BIT2 +#define RXSTATUS_OVERRUN BIT1 +#define RXSTATUS_DATA_AVAILABLE BIT0 +#define RXSTATUS_ALL 0x01f6 +#define usc_UnlatchRxstatusBits(a,b) usc_OutReg( (a), RCSR, (u16)((b) & RXSTATUS_ALL) ) + +/* + * Values for setting transmit idle mode in + * Transmit Control/status Register (TCSR) + */ +#define IDLEMODE_FLAGS 0x0000 +#define IDLEMODE_ALT_ONE_ZERO 0x0100 +#define IDLEMODE_ZERO 0x0200 +#define IDLEMODE_ONE 0x0300 +#define IDLEMODE_ALT_MARK_SPACE 0x0500 +#define IDLEMODE_SPACE 0x0600 +#define IDLEMODE_MARK 0x0700 +#define IDLEMODE_MASK 0x0700 + +/* + * IUSC revision identifiers + */ +#define IUSC_SL1660 0x4d44 +#define IUSC_PRE_SL1660 0x4553 + +/* + * Transmit status Bits in Transmit Command/status Register (TCSR) + */ + +#define TCSR_PRESERVE 0x0F00 + +#define TCSR_UNDERWAIT BIT11 +#define TXSTATUS_PREAMBLE_SENT BIT7 +#define TXSTATUS_IDLE_SENT BIT6 +#define TXSTATUS_ABORT_SENT BIT5 +#define TXSTATUS_EOF_SENT BIT4 +#define TXSTATUS_EOM_SENT BIT4 +#define TXSTATUS_CRC_SENT BIT3 +#define TXSTATUS_ALL_SENT BIT2 +#define TXSTATUS_UNDERRUN BIT1 +#define TXSTATUS_FIFO_EMPTY BIT0 +#define TXSTATUS_ALL 0x00fa +#define usc_UnlatchTxstatusBits(a,b) usc_OutReg( (a), TCSR, (u16)((a)->tcsr_value + ((b) & 0x00FF)) ) + + +#define MISCSTATUS_RXC_LATCHED BIT15 +#define MISCSTATUS_RXC BIT14 +#define MISCSTATUS_TXC_LATCHED BIT13 +#define MISCSTATUS_TXC BIT12 +#define MISCSTATUS_RI_LATCHED BIT11 +#define MISCSTATUS_RI BIT10 +#define MISCSTATUS_DSR_LATCHED BIT9 +#define MISCSTATUS_DSR BIT8 +#define MISCSTATUS_DCD_LATCHED BIT7 +#define MISCSTATUS_DCD BIT6 +#define MISCSTATUS_CTS_LATCHED BIT5 +#define MISCSTATUS_CTS BIT4 +#define MISCSTATUS_RCC_UNDERRUN BIT3 +#define MISCSTATUS_DPLL_NO_SYNC BIT2 +#define MISCSTATUS_BRG1_ZERO BIT1 +#define MISCSTATUS_BRG0_ZERO BIT0 + +#define usc_UnlatchIostatusBits(a,b) usc_OutReg((a),MISR,(u16)((b) & 0xaaa0)) +#define usc_UnlatchMiscstatusBits(a,b) usc_OutReg((a),MISR,(u16)((b) & 0x000f)) + +#define SICR_RXC_ACTIVE BIT15 +#define SICR_RXC_INACTIVE BIT14 +#define SICR_RXC (BIT15|BIT14) +#define SICR_TXC_ACTIVE BIT13 +#define SICR_TXC_INACTIVE BIT12 +#define SICR_TXC (BIT13|BIT12) +#define SICR_RI_ACTIVE BIT11 +#define SICR_RI_INACTIVE BIT10 +#define SICR_RI (BIT11|BIT10) +#define SICR_DSR_ACTIVE BIT9 +#define SICR_DSR_INACTIVE BIT8 +#define SICR_DSR (BIT9|BIT8) +#define SICR_DCD_ACTIVE BIT7 +#define SICR_DCD_INACTIVE BIT6 +#define SICR_DCD (BIT7|BIT6) +#define SICR_CTS_ACTIVE BIT5 +#define SICR_CTS_INACTIVE BIT4 +#define SICR_CTS (BIT5|BIT4) +#define SICR_RCC_UNDERFLOW BIT3 +#define SICR_DPLL_NO_SYNC BIT2 +#define SICR_BRG1_ZERO BIT1 +#define SICR_BRG0_ZERO BIT0 + +void usc_DisableMasterIrqBit( struct mgsl_struct *info ); +void usc_EnableMasterIrqBit( struct mgsl_struct *info ); +void usc_EnableInterrupts( struct mgsl_struct *info, u16 IrqMask ); +void usc_DisableInterrupts( struct mgsl_struct *info, u16 IrqMask ); +void usc_ClearIrqPendingBits( struct mgsl_struct *info, u16 IrqMask ); + +#define usc_EnableInterrupts( a, b ) \ + usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0xff00) + 0xc0 + (b)) ) + +#define usc_DisableInterrupts( a, b ) \ + usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0xff00) + 0x80 + (b)) ) + +#define usc_EnableMasterIrqBit(a) \ + usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0x0f00) + 0xb000) ) + +#define usc_DisableMasterIrqBit(a) \ + usc_OutReg( (a), ICR, (u16)(usc_InReg((a),ICR) & 0x7f00) ) + +#define usc_ClearIrqPendingBits( a, b ) usc_OutReg( (a), DCCR, 0x40 + (b) ) + +/* + * Transmit status Bits in Transmit Control status Register (TCSR) + * and Transmit Interrupt Control Register (TICR) (except BIT2, BIT0) + */ + +#define TXSTATUS_PREAMBLE_SENT BIT7 +#define TXSTATUS_IDLE_SENT BIT6 +#define TXSTATUS_ABORT_SENT BIT5 +#define TXSTATUS_EOF BIT4 +#define TXSTATUS_CRC_SENT BIT3 +#define TXSTATUS_ALL_SENT BIT2 +#define TXSTATUS_UNDERRUN BIT1 +#define TXSTATUS_FIFO_EMPTY BIT0 + +#define DICR_MASTER BIT15 +#define DICR_TRANSMIT BIT0 +#define DICR_RECEIVE BIT1 + +#define usc_EnableDmaInterrupts(a,b) \ + usc_OutDmaReg( (a), DICR, (u16)(usc_InDmaReg((a),DICR) | (b)) ) + +#define usc_DisableDmaInterrupts(a,b) \ + usc_OutDmaReg( (a), DICR, (u16)(usc_InDmaReg((a),DICR) & ~(b)) ) + +#define usc_EnableStatusIrqs(a,b) \ + usc_OutReg( (a), SICR, (u16)(usc_InReg((a),SICR) | (b)) ) + +#define usc_DisablestatusIrqs(a,b) \ + usc_OutReg( (a), SICR, (u16)(usc_InReg((a),SICR) & ~(b)) ) + +/* Transmit status Bits in Transmit Control status Register (TCSR) */ +/* and Transmit Interrupt Control Register (TICR) (except BIT2, BIT0) */ + + +#define DISABLE_UNCONDITIONAL 0 +#define DISABLE_END_OF_FRAME 1 +#define ENABLE_UNCONDITIONAL 2 +#define ENABLE_AUTO_CTS 3 +#define ENABLE_AUTO_DCD 3 +#define usc_EnableTransmitter(a,b) \ + usc_OutReg( (a), TMR, (u16)((usc_InReg((a),TMR) & 0xfffc) | (b)) ) +#define usc_EnableReceiver(a,b) \ + usc_OutReg( (a), RMR, (u16)((usc_InReg((a),RMR) & 0xfffc) | (b)) ) + +static u16 usc_InDmaReg( struct mgsl_struct *info, u16 Port ); +static void usc_OutDmaReg( struct mgsl_struct *info, u16 Port, u16 Value ); +static void usc_DmaCmd( struct mgsl_struct *info, u16 Cmd ); + +static u16 usc_InReg( struct mgsl_struct *info, u16 Port ); +static void usc_OutReg( struct mgsl_struct *info, u16 Port, u16 Value ); +static void usc_RTCmd( struct mgsl_struct *info, u16 Cmd ); +void usc_RCmd( struct mgsl_struct *info, u16 Cmd ); +void usc_TCmd( struct mgsl_struct *info, u16 Cmd ); + +#define usc_TCmd(a,b) usc_OutReg((a), TCSR, (u16)((a)->tcsr_value + (b))) +#define usc_RCmd(a,b) usc_OutReg((a), RCSR, (b)) + +#define usc_SetTransmitSyncChars(a,s0,s1) usc_OutReg((a), TSR, (u16)(((u16)s0<<8)|(u16)s1)) + +static void usc_process_rxoverrun_sync( struct mgsl_struct *info ); +static void usc_start_receiver( struct mgsl_struct *info ); +static void usc_stop_receiver( struct mgsl_struct *info ); + +static void usc_start_transmitter( struct mgsl_struct *info ); +static void usc_stop_transmitter( struct mgsl_struct *info ); +static void usc_set_txidle( struct mgsl_struct *info ); +static void usc_load_txfifo( struct mgsl_struct *info ); + +static void usc_enable_aux_clock( struct mgsl_struct *info, u32 DataRate ); +static void usc_enable_loopback( struct mgsl_struct *info, int enable ); + +static void usc_get_serial_signals( struct mgsl_struct *info ); +static void usc_set_serial_signals( struct mgsl_struct *info ); + +static void usc_reset( struct mgsl_struct *info ); + +static void usc_set_sync_mode( struct mgsl_struct *info ); +static void usc_set_sdlc_mode( struct mgsl_struct *info ); +static void usc_set_async_mode( struct mgsl_struct *info ); +static void usc_enable_async_clock( struct mgsl_struct *info, u32 DataRate ); + +static void usc_loopback_frame( struct mgsl_struct *info ); + +static void mgsl_tx_timeout(struct timer_list *t); + + +static void usc_loopmode_cancel_transmit( struct mgsl_struct * info ); +static void usc_loopmode_insert_request( struct mgsl_struct * info ); +static int usc_loopmode_active( struct mgsl_struct * info); +static void usc_loopmode_send_done( struct mgsl_struct * info ); + +static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg); + +#if SYNCLINK_GENERIC_HDLC +#define dev_to_port(D) (dev_to_hdlc(D)->priv) +static void hdlcdev_tx_done(struct mgsl_struct *info); +static void hdlcdev_rx(struct mgsl_struct *info, char *buf, int size); +static int hdlcdev_init(struct mgsl_struct *info); +static void hdlcdev_exit(struct mgsl_struct *info); +#endif + +/* + * Defines a BUS descriptor value for the PCI adapter + * local bus address ranges. + */ + +#define BUS_DESCRIPTOR( WrHold, WrDly, RdDly, Nwdd, Nwad, Nxda, Nrdd, Nrad ) \ +(0x00400020 + \ +((WrHold) << 30) + \ +((WrDly) << 28) + \ +((RdDly) << 26) + \ +((Nwdd) << 20) + \ +((Nwad) << 15) + \ +((Nxda) << 13) + \ +((Nrdd) << 11) + \ +((Nrad) << 6) ) + +static void mgsl_trace_block(struct mgsl_struct *info,const char* data, int count, int xmit); + +/* + * Adapter diagnostic routines + */ +static bool mgsl_register_test( struct mgsl_struct *info ); +static bool mgsl_irq_test( struct mgsl_struct *info ); +static bool mgsl_dma_test( struct mgsl_struct *info ); +static bool mgsl_memory_test( struct mgsl_struct *info ); +static int mgsl_adapter_test( struct mgsl_struct *info ); + +/* + * device and resource management routines + */ +static int mgsl_claim_resources(struct mgsl_struct *info); +static void mgsl_release_resources(struct mgsl_struct *info); +static void mgsl_add_device(struct mgsl_struct *info); +static struct mgsl_struct* mgsl_allocate_device(void); + +/* + * DMA buffer manupulation functions. + */ +static void mgsl_free_rx_frame_buffers( struct mgsl_struct *info, unsigned int StartIndex, unsigned int EndIndex ); +static bool mgsl_get_rx_frame( struct mgsl_struct *info ); +static bool mgsl_get_raw_rx_frame( struct mgsl_struct *info ); +static void mgsl_reset_rx_dma_buffers( struct mgsl_struct *info ); +static void mgsl_reset_tx_dma_buffers( struct mgsl_struct *info ); +static int num_free_tx_dma_buffers(struct mgsl_struct *info); +static void mgsl_load_tx_dma_buffer( struct mgsl_struct *info, const char *Buffer, unsigned int BufferSize); +static void mgsl_load_pci_memory(char* TargetPtr, const char* SourcePtr, unsigned short count); + +/* + * DMA and Shared Memory buffer allocation and formatting + */ +static int mgsl_allocate_dma_buffers(struct mgsl_struct *info); +static void mgsl_free_dma_buffers(struct mgsl_struct *info); +static int mgsl_alloc_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList,int Buffercount); +static void mgsl_free_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList,int Buffercount); +static int mgsl_alloc_buffer_list_memory(struct mgsl_struct *info); +static void mgsl_free_buffer_list_memory(struct mgsl_struct *info); +static int mgsl_alloc_intermediate_rxbuffer_memory(struct mgsl_struct *info); +static void mgsl_free_intermediate_rxbuffer_memory(struct mgsl_struct *info); +static int mgsl_alloc_intermediate_txbuffer_memory(struct mgsl_struct *info); +static void mgsl_free_intermediate_txbuffer_memory(struct mgsl_struct *info); +static bool load_next_tx_holding_buffer(struct mgsl_struct *info); +static int save_tx_buffer_request(struct mgsl_struct *info,const char *Buffer, unsigned int BufferSize); + +/* + * Bottom half interrupt handlers + */ +static void mgsl_bh_handler(struct work_struct *work); +static void mgsl_bh_receive(struct mgsl_struct *info); +static void mgsl_bh_transmit(struct mgsl_struct *info); +static void mgsl_bh_status(struct mgsl_struct *info); + +/* + * Interrupt handler routines and dispatch table. + */ +static void mgsl_isr_null( struct mgsl_struct *info ); +static void mgsl_isr_transmit_data( struct mgsl_struct *info ); +static void mgsl_isr_receive_data( struct mgsl_struct *info ); +static void mgsl_isr_receive_status( struct mgsl_struct *info ); +static void mgsl_isr_transmit_status( struct mgsl_struct *info ); +static void mgsl_isr_io_pin( struct mgsl_struct *info ); +static void mgsl_isr_misc( struct mgsl_struct *info ); +static void mgsl_isr_receive_dma( struct mgsl_struct *info ); +static void mgsl_isr_transmit_dma( struct mgsl_struct *info ); + +typedef void (*isr_dispatch_func)(struct mgsl_struct *); + +static isr_dispatch_func UscIsrTable[7] = +{ + mgsl_isr_null, + mgsl_isr_misc, + mgsl_isr_io_pin, + mgsl_isr_transmit_data, + mgsl_isr_transmit_status, + mgsl_isr_receive_data, + mgsl_isr_receive_status +}; + +/* + * ioctl call handlers + */ +static int tiocmget(struct tty_struct *tty); +static int tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear); +static int mgsl_get_stats(struct mgsl_struct * info, struct mgsl_icount + __user *user_icount); +static int mgsl_get_params(struct mgsl_struct * info, MGSL_PARAMS __user *user_params); +static int mgsl_set_params(struct mgsl_struct * info, MGSL_PARAMS __user *new_params); +static int mgsl_get_txidle(struct mgsl_struct * info, int __user *idle_mode); +static int mgsl_set_txidle(struct mgsl_struct * info, int idle_mode); +static int mgsl_txenable(struct mgsl_struct * info, int enable); +static int mgsl_txabort(struct mgsl_struct * info); +static int mgsl_rxenable(struct mgsl_struct * info, int enable); +static int mgsl_wait_event(struct mgsl_struct * info, int __user *mask); +static int mgsl_loopmode_send_done( struct mgsl_struct * info ); + +/* set non-zero on successful registration with PCI subsystem */ +static bool pci_registered; + +/* + * Global linked list of SyncLink devices + */ +static struct mgsl_struct *mgsl_device_list; +static int mgsl_device_count; + +/* + * Set this param to non-zero to load eax with the + * .text section address and breakpoint on module load. + * This is useful for use with gdb and add-symbol-file command. + */ +static bool break_on_load; + +/* + * Driver major number, defaults to zero to get auto + * assigned major number. May be forced as module parameter. + */ +static int ttymajor; + +/* + * Array of user specified options for ISA adapters. + */ +static int io[MAX_ISA_DEVICES]; +static int irq[MAX_ISA_DEVICES]; +static int dma[MAX_ISA_DEVICES]; +static int debug_level; +static int maxframe[MAX_TOTAL_DEVICES]; +static int txdmabufs[MAX_TOTAL_DEVICES]; +static int txholdbufs[MAX_TOTAL_DEVICES]; + +module_param(break_on_load, bool, 0); +module_param(ttymajor, int, 0); +module_param_hw_array(io, int, ioport, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); +module_param_hw_array(dma, int, dma, NULL, 0); +module_param(debug_level, int, 0); +module_param_array(maxframe, int, NULL, 0); +module_param_array(txdmabufs, int, NULL, 0); +module_param_array(txholdbufs, int, NULL, 0); + +static char *driver_name = "SyncLink serial driver"; +static char *driver_version = "$Revision: 4.38 $"; + +static int synclink_init_one (struct pci_dev *dev, + const struct pci_device_id *ent); +static void synclink_remove_one (struct pci_dev *dev); + +static const struct pci_device_id synclink_pci_tbl[] = { + { PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_USC, PCI_ANY_ID, PCI_ANY_ID, }, + { PCI_VENDOR_ID_MICROGATE, 0x0210, PCI_ANY_ID, PCI_ANY_ID, }, + { 0, }, /* terminate list */ +}; +MODULE_DEVICE_TABLE(pci, synclink_pci_tbl); + +MODULE_LICENSE("GPL"); + +static struct pci_driver synclink_pci_driver = { + .name = "synclink", + .id_table = synclink_pci_tbl, + .probe = synclink_init_one, + .remove = synclink_remove_one, +}; + +static struct tty_driver *serial_driver; + +/* number of characters left in xmit buffer before we ask for more */ +#define WAKEUP_CHARS 256 + + +static void mgsl_change_params(struct mgsl_struct *info); +static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout); + +/* + * 1st function defined in .text section. Calling this function in + * init_module() followed by a breakpoint allows a remote debugger + * (gdb) to get the .text address for the add-symbol-file command. + * This allows remote debugging of dynamically loadable modules. + */ +static void* mgsl_get_text_ptr(void) +{ + return mgsl_get_text_ptr; +} + +static inline int mgsl_paranoia_check(struct mgsl_struct *info, + char *name, const char *routine) +{ +#ifdef MGSL_PARANOIA_CHECK + static const char *badmagic = + "Warning: bad magic number for mgsl struct (%s) in %s\n"; + static const char *badinfo = + "Warning: null mgsl_struct for (%s) in %s\n"; + + if (!info) { + printk(badinfo, name, routine); + return 1; + } + if (info->magic != MGSL_MAGIC) { + printk(badmagic, name, routine); + return 1; + } +#else + if (!info) + return 1; +#endif + return 0; +} + +/* + * line discipline callback wrappers + * + * The wrappers maintain line discipline references + * while calling into the line discipline. + * + * ldisc_receive_buf - pass receive data to line discipline + */ + +static void ldisc_receive_buf(struct tty_struct *tty, + const __u8 *data, char *flags, int count) +{ + struct tty_ldisc *ld; + if (!tty) + return; + ld = tty_ldisc_ref(tty); + if (ld) { + if (ld->ops->receive_buf) + ld->ops->receive_buf(tty, data, flags, count); + tty_ldisc_deref(ld); + } +} + +/* mgsl_stop() throttle (stop) transmitter + * + * Arguments: tty pointer to tty info structure + * Return Value: None + */ +static void mgsl_stop(struct tty_struct *tty) +{ + struct mgsl_struct *info = tty->driver_data; + unsigned long flags; + + if (mgsl_paranoia_check(info, tty->name, "mgsl_stop")) + return; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk("mgsl_stop(%s)\n",info->device_name); + + spin_lock_irqsave(&info->irq_spinlock,flags); + if (info->tx_enabled) + usc_stop_transmitter(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + +} /* end of mgsl_stop() */ + +/* mgsl_start() release (start) transmitter + * + * Arguments: tty pointer to tty info structure + * Return Value: None + */ +static void mgsl_start(struct tty_struct *tty) +{ + struct mgsl_struct *info = tty->driver_data; + unsigned long flags; + + if (mgsl_paranoia_check(info, tty->name, "mgsl_start")) + return; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk("mgsl_start(%s)\n",info->device_name); + + spin_lock_irqsave(&info->irq_spinlock,flags); + if (!info->tx_enabled) + usc_start_transmitter(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + +} /* end of mgsl_start() */ + +/* + * Bottom half work queue access functions + */ + +/* mgsl_bh_action() Return next bottom half action to perform. + * Return Value: BH action code or 0 if nothing to do. + */ +static int mgsl_bh_action(struct mgsl_struct *info) +{ + unsigned long flags; + int rc = 0; + + spin_lock_irqsave(&info->irq_spinlock,flags); + + if (info->pending_bh & BH_RECEIVE) { + info->pending_bh &= ~BH_RECEIVE; + rc = BH_RECEIVE; + } else if (info->pending_bh & BH_TRANSMIT) { + info->pending_bh &= ~BH_TRANSMIT; + rc = BH_TRANSMIT; + } else if (info->pending_bh & BH_STATUS) { + info->pending_bh &= ~BH_STATUS; + rc = BH_STATUS; + } + + if (!rc) { + /* Mark BH routine as complete */ + info->bh_running = false; + info->bh_requested = false; + } + + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + return rc; +} + +/* + * Perform bottom half processing of work items queued by ISR. + */ +static void mgsl_bh_handler(struct work_struct *work) +{ + struct mgsl_struct *info = + container_of(work, struct mgsl_struct, task); + int action; + + if ( debug_level >= DEBUG_LEVEL_BH ) + printk( "%s(%d):mgsl_bh_handler(%s) entry\n", + __FILE__,__LINE__,info->device_name); + + info->bh_running = true; + + while((action = mgsl_bh_action(info)) != 0) { + + /* Process work item */ + if ( debug_level >= DEBUG_LEVEL_BH ) + printk( "%s(%d):mgsl_bh_handler() work item action=%d\n", + __FILE__,__LINE__,action); + + switch (action) { + + case BH_RECEIVE: + mgsl_bh_receive(info); + break; + case BH_TRANSMIT: + mgsl_bh_transmit(info); + break; + case BH_STATUS: + mgsl_bh_status(info); + break; + default: + /* unknown work item ID */ + printk("Unknown work item ID=%08X!\n", action); + break; + } + } + + if ( debug_level >= DEBUG_LEVEL_BH ) + printk( "%s(%d):mgsl_bh_handler(%s) exit\n", + __FILE__,__LINE__,info->device_name); +} + +static void mgsl_bh_receive(struct mgsl_struct *info) +{ + bool (*get_rx_frame)(struct mgsl_struct *info) = + (info->params.mode == MGSL_MODE_HDLC ? mgsl_get_rx_frame : mgsl_get_raw_rx_frame); + + if ( debug_level >= DEBUG_LEVEL_BH ) + printk( "%s(%d):mgsl_bh_receive(%s)\n", + __FILE__,__LINE__,info->device_name); + + do + { + if (info->rx_rcc_underrun) { + unsigned long flags; + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_start_receiver(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + return; + } + } while(get_rx_frame(info)); +} + +static void mgsl_bh_transmit(struct mgsl_struct *info) +{ + struct tty_struct *tty = info->port.tty; + unsigned long flags; + + if ( debug_level >= DEBUG_LEVEL_BH ) + printk( "%s(%d):mgsl_bh_transmit() entry on %s\n", + __FILE__,__LINE__,info->device_name); + + if (tty) + tty_wakeup(tty); + + /* if transmitter idle and loopmode_send_done_requested + * then start echoing RxD to TxD + */ + spin_lock_irqsave(&info->irq_spinlock,flags); + if ( !info->tx_active && info->loopmode_send_done_requested ) + usc_loopmode_send_done( info ); + spin_unlock_irqrestore(&info->irq_spinlock,flags); +} + +static void mgsl_bh_status(struct mgsl_struct *info) +{ + if ( debug_level >= DEBUG_LEVEL_BH ) + printk( "%s(%d):mgsl_bh_status() entry on %s\n", + __FILE__,__LINE__,info->device_name); + + info->ri_chkcount = 0; + info->dsr_chkcount = 0; + info->dcd_chkcount = 0; + info->cts_chkcount = 0; +} + +/* mgsl_isr_receive_status() + * + * Service a receive status interrupt. The type of status + * interrupt is indicated by the state of the RCSR. + * This is only used for HDLC mode. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void mgsl_isr_receive_status( struct mgsl_struct *info ) +{ + u16 status = usc_InReg( info, RCSR ); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):mgsl_isr_receive_status status=%04X\n", + __FILE__,__LINE__,status); + + if ( (status & RXSTATUS_ABORT_RECEIVED) && + info->loopmode_insert_requested && + usc_loopmode_active(info) ) + { + ++info->icount.rxabort; + info->loopmode_insert_requested = false; + + /* clear CMR:13 to start echoing RxD to TxD */ + info->cmr_value &= ~BIT13; + usc_OutReg(info, CMR, info->cmr_value); + + /* disable received abort irq (no longer required) */ + usc_OutReg(info, RICR, + (usc_InReg(info, RICR) & ~RXSTATUS_ABORT_RECEIVED)); + } + + if (status & (RXSTATUS_EXITED_HUNT | RXSTATUS_IDLE_RECEIVED)) { + if (status & RXSTATUS_EXITED_HUNT) + info->icount.exithunt++; + if (status & RXSTATUS_IDLE_RECEIVED) + info->icount.rxidle++; + wake_up_interruptible(&info->event_wait_q); + } + + if (status & RXSTATUS_OVERRUN){ + info->icount.rxover++; + usc_process_rxoverrun_sync( info ); + } + + usc_ClearIrqPendingBits( info, RECEIVE_STATUS ); + usc_UnlatchRxstatusBits( info, status ); + +} /* end of mgsl_isr_receive_status() */ + +/* mgsl_isr_transmit_status() + * + * Service a transmit status interrupt + * HDLC mode :end of transmit frame + * Async mode:all data is sent + * transmit status is indicated by bits in the TCSR. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void mgsl_isr_transmit_status( struct mgsl_struct *info ) +{ + u16 status = usc_InReg( info, TCSR ); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):mgsl_isr_transmit_status status=%04X\n", + __FILE__,__LINE__,status); + + usc_ClearIrqPendingBits( info, TRANSMIT_STATUS ); + usc_UnlatchTxstatusBits( info, status ); + + if ( status & (TXSTATUS_UNDERRUN | TXSTATUS_ABORT_SENT) ) + { + /* finished sending HDLC abort. This may leave */ + /* the TxFifo with data from the aborted frame */ + /* so purge the TxFifo. Also shutdown the DMA */ + /* channel in case there is data remaining in */ + /* the DMA buffer */ + usc_DmaCmd( info, DmaCmd_ResetTxChannel ); + usc_RTCmd( info, RTCmd_PurgeTxFifo ); + } + + if ( status & TXSTATUS_EOF_SENT ) + info->icount.txok++; + else if ( status & TXSTATUS_UNDERRUN ) + info->icount.txunder++; + else if ( status & TXSTATUS_ABORT_SENT ) + info->icount.txabort++; + else + info->icount.txunder++; + + info->tx_active = false; + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + del_timer(&info->tx_timer); + + if ( info->drop_rts_on_tx_done ) { + usc_get_serial_signals( info ); + if ( info->serial_signals & SerialSignal_RTS ) { + info->serial_signals &= ~SerialSignal_RTS; + usc_set_serial_signals( info ); + } + info->drop_rts_on_tx_done = false; + } + +#if SYNCLINK_GENERIC_HDLC + if (info->netcount) + hdlcdev_tx_done(info); + else +#endif + { + if (info->port.tty->stopped || info->port.tty->hw_stopped) { + usc_stop_transmitter(info); + return; + } + info->pending_bh |= BH_TRANSMIT; + } + +} /* end of mgsl_isr_transmit_status() */ + +/* mgsl_isr_io_pin() + * + * Service an Input/Output pin interrupt. The type of + * interrupt is indicated by bits in the MISR + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void mgsl_isr_io_pin( struct mgsl_struct *info ) +{ + struct mgsl_icount *icount; + u16 status = usc_InReg( info, MISR ); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):mgsl_isr_io_pin status=%04X\n", + __FILE__,__LINE__,status); + + usc_ClearIrqPendingBits( info, IO_PIN ); + usc_UnlatchIostatusBits( info, status ); + + if (status & (MISCSTATUS_CTS_LATCHED | MISCSTATUS_DCD_LATCHED | + MISCSTATUS_DSR_LATCHED | MISCSTATUS_RI_LATCHED) ) { + icount = &info->icount; + /* update input line counters */ + if (status & MISCSTATUS_RI_LATCHED) { + if ((info->ri_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) + usc_DisablestatusIrqs(info,SICR_RI); + icount->rng++; + if ( status & MISCSTATUS_RI ) + info->input_signal_events.ri_up++; + else + info->input_signal_events.ri_down++; + } + if (status & MISCSTATUS_DSR_LATCHED) { + if ((info->dsr_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) + usc_DisablestatusIrqs(info,SICR_DSR); + icount->dsr++; + if ( status & MISCSTATUS_DSR ) + info->input_signal_events.dsr_up++; + else + info->input_signal_events.dsr_down++; + } + if (status & MISCSTATUS_DCD_LATCHED) { + if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) + usc_DisablestatusIrqs(info,SICR_DCD); + icount->dcd++; + if (status & MISCSTATUS_DCD) { + info->input_signal_events.dcd_up++; + } else + info->input_signal_events.dcd_down++; +#if SYNCLINK_GENERIC_HDLC + if (info->netcount) { + if (status & MISCSTATUS_DCD) + netif_carrier_on(info->netdev); + else + netif_carrier_off(info->netdev); + } +#endif + } + if (status & MISCSTATUS_CTS_LATCHED) + { + if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) + usc_DisablestatusIrqs(info,SICR_CTS); + icount->cts++; + if ( status & MISCSTATUS_CTS ) + info->input_signal_events.cts_up++; + else + info->input_signal_events.cts_down++; + } + wake_up_interruptible(&info->status_event_wait_q); + wake_up_interruptible(&info->event_wait_q); + + if (tty_port_check_carrier(&info->port) && + (status & MISCSTATUS_DCD_LATCHED) ) { + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s CD now %s...", info->device_name, + (status & MISCSTATUS_DCD) ? "on" : "off"); + if (status & MISCSTATUS_DCD) + wake_up_interruptible(&info->port.open_wait); + else { + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("doing serial hangup..."); + if (info->port.tty) + tty_hangup(info->port.tty); + } + } + + if (tty_port_cts_enabled(&info->port) && + (status & MISCSTATUS_CTS_LATCHED) ) { + if (info->port.tty->hw_stopped) { + if (status & MISCSTATUS_CTS) { + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("CTS tx start..."); + info->port.tty->hw_stopped = 0; + usc_start_transmitter(info); + info->pending_bh |= BH_TRANSMIT; + return; + } + } else { + if (!(status & MISCSTATUS_CTS)) { + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("CTS tx stop..."); + if (info->port.tty) + info->port.tty->hw_stopped = 1; + usc_stop_transmitter(info); + } + } + } + } + + info->pending_bh |= BH_STATUS; + + /* for diagnostics set IRQ flag */ + if ( status & MISCSTATUS_TXC_LATCHED ){ + usc_OutReg( info, SICR, + (unsigned short)(usc_InReg(info,SICR) & ~(SICR_TXC_ACTIVE+SICR_TXC_INACTIVE)) ); + usc_UnlatchIostatusBits( info, MISCSTATUS_TXC_LATCHED ); + info->irq_occurred = true; + } + +} /* end of mgsl_isr_io_pin() */ + +/* mgsl_isr_transmit_data() + * + * Service a transmit data interrupt (async mode only). + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void mgsl_isr_transmit_data( struct mgsl_struct *info ) +{ + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):mgsl_isr_transmit_data xmit_cnt=%d\n", + __FILE__,__LINE__,info->xmit_cnt); + + usc_ClearIrqPendingBits( info, TRANSMIT_DATA ); + + if (info->port.tty->stopped || info->port.tty->hw_stopped) { + usc_stop_transmitter(info); + return; + } + + if ( info->xmit_cnt ) + usc_load_txfifo( info ); + else + info->tx_active = false; + + if (info->xmit_cnt < WAKEUP_CHARS) + info->pending_bh |= BH_TRANSMIT; + +} /* end of mgsl_isr_transmit_data() */ + +/* mgsl_isr_receive_data() + * + * Service a receive data interrupt. This occurs + * when operating in asynchronous interrupt transfer mode. + * The receive data FIFO is flushed to the receive data buffers. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void mgsl_isr_receive_data( struct mgsl_struct *info ) +{ + int Fifocount; + u16 status; + int work = 0; + unsigned char DataByte; + struct mgsl_icount *icount = &info->icount; + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):mgsl_isr_receive_data\n", + __FILE__,__LINE__); + + usc_ClearIrqPendingBits( info, RECEIVE_DATA ); + + /* select FIFO status for RICR readback */ + usc_RCmd( info, RCmd_SelectRicrRxFifostatus ); + + /* clear the Wordstatus bit so that status readback */ + /* only reflects the status of this byte */ + usc_OutReg( info, RICR+LSBONLY, (u16)(usc_InReg(info, RICR+LSBONLY) & ~BIT3 )); + + /* flush the receive FIFO */ + + while( (Fifocount = (usc_InReg(info,RICR) >> 8)) ) { + int flag; + + /* read one byte from RxFIFO */ + outw( (inw(info->io_base + CCAR) & 0x0780) | (RDR+LSBONLY), + info->io_base + CCAR ); + DataByte = inb( info->io_base + CCAR ); + + /* get the status of the received byte */ + status = usc_InReg(info, RCSR); + if ( status & (RXSTATUS_FRAMING_ERROR | RXSTATUS_PARITY_ERROR | + RXSTATUS_OVERRUN | RXSTATUS_BREAK_RECEIVED) ) + usc_UnlatchRxstatusBits(info,RXSTATUS_ALL); + + icount->rx++; + + flag = 0; + if ( status & (RXSTATUS_FRAMING_ERROR | RXSTATUS_PARITY_ERROR | + RXSTATUS_OVERRUN | RXSTATUS_BREAK_RECEIVED) ) { + printk("rxerr=%04X\n",status); + /* update error statistics */ + if ( status & RXSTATUS_BREAK_RECEIVED ) { + status &= ~(RXSTATUS_FRAMING_ERROR | RXSTATUS_PARITY_ERROR); + icount->brk++; + } else if (status & RXSTATUS_PARITY_ERROR) + icount->parity++; + else if (status & RXSTATUS_FRAMING_ERROR) + icount->frame++; + else if (status & RXSTATUS_OVERRUN) { + /* must issue purge fifo cmd before */ + /* 16C32 accepts more receive chars */ + usc_RTCmd(info,RTCmd_PurgeRxFifo); + icount->overrun++; + } + + /* discard char if tty control flags say so */ + if (status & info->ignore_status_mask) + continue; + + status &= info->read_status_mask; + + if (status & RXSTATUS_BREAK_RECEIVED) { + flag = TTY_BREAK; + if (info->port.flags & ASYNC_SAK) + do_SAK(info->port.tty); + } else if (status & RXSTATUS_PARITY_ERROR) + flag = TTY_PARITY; + else if (status & RXSTATUS_FRAMING_ERROR) + flag = TTY_FRAME; + } /* end of if (error) */ + tty_insert_flip_char(&info->port, DataByte, flag); + if (status & RXSTATUS_OVERRUN) { + /* Overrun is special, since it's + * reported immediately, and doesn't + * affect the current character + */ + work += tty_insert_flip_char(&info->port, 0, TTY_OVERRUN); + } + } + + if ( debug_level >= DEBUG_LEVEL_ISR ) { + printk("%s(%d):rx=%d brk=%d parity=%d frame=%d overrun=%d\n", + __FILE__,__LINE__,icount->rx,icount->brk, + icount->parity,icount->frame,icount->overrun); + } + + if(work) + tty_flip_buffer_push(&info->port); +} + +/* mgsl_isr_misc() + * + * Service a miscellaneous interrupt source. + * + * Arguments: info pointer to device extension (instance data) + * Return Value: None + */ +static void mgsl_isr_misc( struct mgsl_struct *info ) +{ + u16 status = usc_InReg( info, MISR ); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):mgsl_isr_misc status=%04X\n", + __FILE__,__LINE__,status); + + if ((status & MISCSTATUS_RCC_UNDERRUN) && + (info->params.mode == MGSL_MODE_HDLC)) { + + /* turn off receiver and rx DMA */ + usc_EnableReceiver(info,DISABLE_UNCONDITIONAL); + usc_DmaCmd(info, DmaCmd_ResetRxChannel); + usc_UnlatchRxstatusBits(info, RXSTATUS_ALL); + usc_ClearIrqPendingBits(info, RECEIVE_DATA | RECEIVE_STATUS); + usc_DisableInterrupts(info, RECEIVE_DATA | RECEIVE_STATUS); + + /* schedule BH handler to restart receiver */ + info->pending_bh |= BH_RECEIVE; + info->rx_rcc_underrun = true; + } + + usc_ClearIrqPendingBits( info, MISC ); + usc_UnlatchMiscstatusBits( info, status ); + +} /* end of mgsl_isr_misc() */ + +/* mgsl_isr_null() + * + * Services undefined interrupt vectors from the + * USC. (hence this function SHOULD never be called) + * + * Arguments: info pointer to device extension (instance data) + * Return Value: None + */ +static void mgsl_isr_null( struct mgsl_struct *info ) +{ + +} /* end of mgsl_isr_null() */ + +/* mgsl_isr_receive_dma() + * + * Service a receive DMA channel interrupt. + * For this driver there are two sources of receive DMA interrupts + * as identified in the Receive DMA mode Register (RDMR): + * + * BIT3 EOA/EOL End of List, all receive buffers in receive + * buffer list have been filled (no more free buffers + * available). The DMA controller has shut down. + * + * BIT2 EOB End of Buffer. This interrupt occurs when a receive + * DMA buffer is terminated in response to completion + * of a good frame or a frame with errors. The status + * of the frame is stored in the buffer entry in the + * list of receive buffer entries. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void mgsl_isr_receive_dma( struct mgsl_struct *info ) +{ + u16 status; + + /* clear interrupt pending and IUS bit for Rx DMA IRQ */ + usc_OutDmaReg( info, CDIR, BIT9 | BIT1 ); + + /* Read the receive DMA status to identify interrupt type. */ + /* This also clears the status bits. */ + status = usc_InDmaReg( info, RDMR ); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):mgsl_isr_receive_dma(%s) status=%04X\n", + __FILE__,__LINE__,info->device_name,status); + + info->pending_bh |= BH_RECEIVE; + + if ( status & BIT3 ) { + info->rx_overflow = true; + info->icount.buf_overrun++; + } + +} /* end of mgsl_isr_receive_dma() */ + +/* mgsl_isr_transmit_dma() + * + * This function services a transmit DMA channel interrupt. + * + * For this driver there is one source of transmit DMA interrupts + * as identified in the Transmit DMA Mode Register (TDMR): + * + * BIT2 EOB End of Buffer. This interrupt occurs when a + * transmit DMA buffer has been emptied. + * + * The driver maintains enough transmit DMA buffers to hold at least + * one max frame size transmit frame. When operating in a buffered + * transmit mode, there may be enough transmit DMA buffers to hold at + * least two or more max frame size frames. On an EOB condition, + * determine if there are any queued transmit buffers and copy into + * transmit DMA buffers if we have room. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void mgsl_isr_transmit_dma( struct mgsl_struct *info ) +{ + u16 status; + + /* clear interrupt pending and IUS bit for Tx DMA IRQ */ + usc_OutDmaReg(info, CDIR, BIT8 | BIT0 ); + + /* Read the transmit DMA status to identify interrupt type. */ + /* This also clears the status bits. */ + + status = usc_InDmaReg( info, TDMR ); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):mgsl_isr_transmit_dma(%s) status=%04X\n", + __FILE__,__LINE__,info->device_name,status); + + if ( status & BIT2 ) { + --info->tx_dma_buffers_used; + + /* if there are transmit frames queued, + * try to load the next one + */ + if ( load_next_tx_holding_buffer(info) ) { + /* if call returns non-zero value, we have + * at least one free tx holding buffer + */ + info->pending_bh |= BH_TRANSMIT; + } + } + +} /* end of mgsl_isr_transmit_dma() */ + +/* mgsl_interrupt() + * + * Interrupt service routine entry point. + * + * Arguments: + * + * irq interrupt number that caused interrupt + * dev_id device ID supplied during interrupt registration + * + * Return Value: None + */ +static irqreturn_t mgsl_interrupt(int dummy, void *dev_id) +{ + struct mgsl_struct *info = dev_id; + u16 UscVector; + u16 DmaVector; + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk(KERN_DEBUG "%s(%d):mgsl_interrupt(%d)entry.\n", + __FILE__, __LINE__, info->irq_level); + + spin_lock(&info->irq_spinlock); + + for(;;) { + /* Read the interrupt vectors from hardware. */ + UscVector = usc_InReg(info, IVR) >> 9; + DmaVector = usc_InDmaReg(info, DIVR); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s UscVector=%08X DmaVector=%08X\n", + __FILE__,__LINE__,info->device_name,UscVector,DmaVector); + + if ( !UscVector && !DmaVector ) + break; + + /* Dispatch interrupt vector */ + if ( UscVector ) + (*UscIsrTable[UscVector])(info); + else if ( (DmaVector&(BIT10|BIT9)) == BIT10) + mgsl_isr_transmit_dma(info); + else + mgsl_isr_receive_dma(info); + + if ( info->isr_overflow ) { + printk(KERN_ERR "%s(%d):%s isr overflow irq=%d\n", + __FILE__, __LINE__, info->device_name, info->irq_level); + usc_DisableMasterIrqBit(info); + usc_DisableDmaInterrupts(info,DICR_MASTER); + break; + } + } + + /* Request bottom half processing if there's something + * for it to do and the bh is not already running + */ + + if ( info->pending_bh && !info->bh_running && !info->bh_requested ) { + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s queueing bh task.\n", + __FILE__,__LINE__,info->device_name); + schedule_work(&info->task); + info->bh_requested = true; + } + + spin_unlock(&info->irq_spinlock); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk(KERN_DEBUG "%s(%d):mgsl_interrupt(%d)exit.\n", + __FILE__, __LINE__, info->irq_level); + + return IRQ_HANDLED; +} /* end of mgsl_interrupt() */ + +/* startup() + * + * Initialize and start device. + * + * Arguments: info pointer to device instance data + * Return Value: 0 if success, otherwise error code + */ +static int startup(struct mgsl_struct * info) +{ + int retval = 0; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk("%s(%d):mgsl_startup(%s)\n",__FILE__,__LINE__,info->device_name); + + if (tty_port_initialized(&info->port)) + return 0; + + if (!info->xmit_buf) { + /* allocate a page of memory for a transmit buffer */ + info->xmit_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL); + if (!info->xmit_buf) { + printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n", + __FILE__,__LINE__,info->device_name); + return -ENOMEM; + } + } + + info->pending_bh = 0; + + memset(&info->icount, 0, sizeof(info->icount)); + + timer_setup(&info->tx_timer, mgsl_tx_timeout, 0); + + /* Allocate and claim adapter resources */ + retval = mgsl_claim_resources(info); + + /* perform existence check and diagnostics */ + if ( !retval ) + retval = mgsl_adapter_test(info); + + if ( retval ) { + if (capable(CAP_SYS_ADMIN) && info->port.tty) + set_bit(TTY_IO_ERROR, &info->port.tty->flags); + mgsl_release_resources(info); + return retval; + } + + /* program hardware for current parameters */ + mgsl_change_params(info); + + if (info->port.tty) + clear_bit(TTY_IO_ERROR, &info->port.tty->flags); + + tty_port_set_initialized(&info->port, 1); + + return 0; +} /* end of startup() */ + +/* shutdown() + * + * Called by mgsl_close() and mgsl_hangup() to shutdown hardware + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void shutdown(struct mgsl_struct * info) +{ + unsigned long flags; + + if (!tty_port_initialized(&info->port)) + return; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_shutdown(%s)\n", + __FILE__,__LINE__, info->device_name ); + + /* clear status wait queue because status changes */ + /* can't happen after shutting down the hardware */ + wake_up_interruptible(&info->status_event_wait_q); + wake_up_interruptible(&info->event_wait_q); + + del_timer_sync(&info->tx_timer); + + if (info->xmit_buf) { + free_page((unsigned long) info->xmit_buf); + info->xmit_buf = NULL; + } + + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_DisableMasterIrqBit(info); + usc_stop_receiver(info); + usc_stop_transmitter(info); + usc_DisableInterrupts(info,RECEIVE_DATA | RECEIVE_STATUS | + TRANSMIT_DATA | TRANSMIT_STATUS | IO_PIN | MISC ); + usc_DisableDmaInterrupts(info,DICR_MASTER + DICR_TRANSMIT + DICR_RECEIVE); + + /* Disable DMAEN (Port 7, Bit 14) */ + /* This disconnects the DMA request signal from the ISA bus */ + /* on the ISA adapter. This has no effect for the PCI adapter */ + usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT15) | BIT14)); + + /* Disable INTEN (Port 6, Bit12) */ + /* This disconnects the IRQ request signal to the ISA bus */ + /* on the ISA adapter. This has no effect for the PCI adapter */ + usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) | BIT12)); + + if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) { + info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR); + usc_set_serial_signals(info); + } + + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + mgsl_release_resources(info); + + if (info->port.tty) + set_bit(TTY_IO_ERROR, &info->port.tty->flags); + + tty_port_set_initialized(&info->port, 0); +} /* end of shutdown() */ + +static void mgsl_program_hw(struct mgsl_struct *info) +{ + unsigned long flags; + + spin_lock_irqsave(&info->irq_spinlock,flags); + + usc_stop_receiver(info); + usc_stop_transmitter(info); + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + + if (info->params.mode == MGSL_MODE_HDLC || + info->params.mode == MGSL_MODE_RAW || + info->netcount) + usc_set_sync_mode(info); + else + usc_set_async_mode(info); + + usc_set_serial_signals(info); + + info->dcd_chkcount = 0; + info->cts_chkcount = 0; + info->ri_chkcount = 0; + info->dsr_chkcount = 0; + + usc_EnableStatusIrqs(info,SICR_CTS+SICR_DSR+SICR_DCD+SICR_RI); + usc_EnableInterrupts(info, IO_PIN); + usc_get_serial_signals(info); + + if (info->netcount || info->port.tty->termios.c_cflag & CREAD) + usc_start_receiver(info); + + spin_unlock_irqrestore(&info->irq_spinlock,flags); +} + +/* Reconfigure adapter based on new parameters + */ +static void mgsl_change_params(struct mgsl_struct *info) +{ + unsigned cflag; + int bits_per_char; + + if (!info->port.tty) + return; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_change_params(%s)\n", + __FILE__,__LINE__, info->device_name ); + + cflag = info->port.tty->termios.c_cflag; + + /* if B0 rate (hangup) specified then negate RTS and DTR */ + /* otherwise assert RTS and DTR */ + if (cflag & CBAUD) + info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR; + else + info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR); + + /* byte size and parity */ + + switch (cflag & CSIZE) { + case CS5: info->params.data_bits = 5; break; + case CS6: info->params.data_bits = 6; break; + case CS7: info->params.data_bits = 7; break; + case CS8: info->params.data_bits = 8; break; + /* Never happens, but GCC is too dumb to figure it out */ + default: info->params.data_bits = 7; break; + } + + if (cflag & CSTOPB) + info->params.stop_bits = 2; + else + info->params.stop_bits = 1; + + info->params.parity = ASYNC_PARITY_NONE; + if (cflag & PARENB) { + if (cflag & PARODD) + info->params.parity = ASYNC_PARITY_ODD; + else + info->params.parity = ASYNC_PARITY_EVEN; +#ifdef CMSPAR + if (cflag & CMSPAR) + info->params.parity = ASYNC_PARITY_SPACE; +#endif + } + + /* calculate number of jiffies to transmit a full + * FIFO (32 bytes) at specified data rate + */ + bits_per_char = info->params.data_bits + + info->params.stop_bits + 1; + + /* if port data rate is set to 460800 or less then + * allow tty settings to override, otherwise keep the + * current data rate. + */ + if (info->params.data_rate <= 460800) + info->params.data_rate = tty_get_baud_rate(info->port.tty); + + if ( info->params.data_rate ) { + info->timeout = (32*HZ*bits_per_char) / + info->params.data_rate; + } + info->timeout += HZ/50; /* Add .02 seconds of slop */ + + tty_port_set_cts_flow(&info->port, cflag & CRTSCTS); + tty_port_set_check_carrier(&info->port, ~cflag & CLOCAL); + + /* process tty input control flags */ + + info->read_status_mask = RXSTATUS_OVERRUN; + if (I_INPCK(info->port.tty)) + info->read_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR; + if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) + info->read_status_mask |= RXSTATUS_BREAK_RECEIVED; + + if (I_IGNPAR(info->port.tty)) + info->ignore_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR; + if (I_IGNBRK(info->port.tty)) { + info->ignore_status_mask |= RXSTATUS_BREAK_RECEIVED; + /* If ignoring parity and break indicators, ignore + * overruns too. (For real raw support). + */ + if (I_IGNPAR(info->port.tty)) + info->ignore_status_mask |= RXSTATUS_OVERRUN; + } + + mgsl_program_hw(info); + +} /* end of mgsl_change_params() */ + +/* mgsl_put_char() + * + * Add a character to the transmit buffer. + * + * Arguments: tty pointer to tty information structure + * ch character to add to transmit buffer + * + * Return Value: None + */ +static int mgsl_put_char(struct tty_struct *tty, unsigned char ch) +{ + struct mgsl_struct *info = tty->driver_data; + unsigned long flags; + int ret = 0; + + if (debug_level >= DEBUG_LEVEL_INFO) { + printk(KERN_DEBUG "%s(%d):mgsl_put_char(%d) on %s\n", + __FILE__, __LINE__, ch, info->device_name); + } + + if (mgsl_paranoia_check(info, tty->name, "mgsl_put_char")) + return 0; + + if (!info->xmit_buf) + return 0; + + spin_lock_irqsave(&info->irq_spinlock, flags); + + if ((info->params.mode == MGSL_MODE_ASYNC ) || !info->tx_active) { + if (info->xmit_cnt < SERIAL_XMIT_SIZE - 1) { + info->xmit_buf[info->xmit_head++] = ch; + info->xmit_head &= SERIAL_XMIT_SIZE-1; + info->xmit_cnt++; + ret = 1; + } + } + spin_unlock_irqrestore(&info->irq_spinlock, flags); + return ret; + +} /* end of mgsl_put_char() */ + +/* mgsl_flush_chars() + * + * Enable transmitter so remaining characters in the + * transmit buffer are sent. + * + * Arguments: tty pointer to tty information structure + * Return Value: None + */ +static void mgsl_flush_chars(struct tty_struct *tty) +{ + struct mgsl_struct *info = tty->driver_data; + unsigned long flags; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):mgsl_flush_chars() entry on %s xmit_cnt=%d\n", + __FILE__,__LINE__,info->device_name,info->xmit_cnt); + + if (mgsl_paranoia_check(info, tty->name, "mgsl_flush_chars")) + return; + + if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || + !info->xmit_buf) + return; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):mgsl_flush_chars() entry on %s starting transmitter\n", + __FILE__,__LINE__,info->device_name ); + + spin_lock_irqsave(&info->irq_spinlock,flags); + + if (!info->tx_active) { + if ( (info->params.mode == MGSL_MODE_HDLC || + info->params.mode == MGSL_MODE_RAW) && info->xmit_cnt ) { + /* operating in synchronous (frame oriented) mode */ + /* copy data from circular xmit_buf to */ + /* transmit DMA buffer. */ + mgsl_load_tx_dma_buffer(info, + info->xmit_buf,info->xmit_cnt); + } + usc_start_transmitter(info); + } + + spin_unlock_irqrestore(&info->irq_spinlock,flags); + +} /* end of mgsl_flush_chars() */ + +/* mgsl_write() + * + * Send a block of data + * + * Arguments: + * + * tty pointer to tty information structure + * buf pointer to buffer containing send data + * count size of send data in bytes + * + * Return Value: number of characters written + */ +static int mgsl_write(struct tty_struct * tty, + const unsigned char *buf, int count) +{ + int c, ret = 0; + struct mgsl_struct *info = tty->driver_data; + unsigned long flags; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):mgsl_write(%s) count=%d\n", + __FILE__,__LINE__,info->device_name,count); + + if (mgsl_paranoia_check(info, tty->name, "mgsl_write")) + goto cleanup; + + if (!info->xmit_buf) + goto cleanup; + + if ( info->params.mode == MGSL_MODE_HDLC || + info->params.mode == MGSL_MODE_RAW ) { + /* operating in synchronous (frame oriented) mode */ + if (info->tx_active) { + + if ( info->params.mode == MGSL_MODE_HDLC ) { + ret = 0; + goto cleanup; + } + /* transmitter is actively sending data - + * if we have multiple transmit dma and + * holding buffers, attempt to queue this + * frame for transmission at a later time. + */ + if (info->tx_holding_count >= info->num_tx_holding_buffers ) { + /* no tx holding buffers available */ + ret = 0; + goto cleanup; + } + + /* queue transmit frame request */ + ret = count; + save_tx_buffer_request(info,buf,count); + + /* if we have sufficient tx dma buffers, + * load the next buffered tx request + */ + spin_lock_irqsave(&info->irq_spinlock,flags); + load_next_tx_holding_buffer(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + goto cleanup; + } + + /* if operating in HDLC LoopMode and the adapter */ + /* has yet to be inserted into the loop, we can't */ + /* transmit */ + + if ( (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) && + !usc_loopmode_active(info) ) + { + ret = 0; + goto cleanup; + } + + if ( info->xmit_cnt ) { + /* Send accumulated from send_char() calls */ + /* as frame and wait before accepting more data. */ + ret = 0; + + /* copy data from circular xmit_buf to */ + /* transmit DMA buffer. */ + mgsl_load_tx_dma_buffer(info, + info->xmit_buf,info->xmit_cnt); + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):mgsl_write(%s) sync xmit_cnt flushing\n", + __FILE__,__LINE__,info->device_name); + } else { + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):mgsl_write(%s) sync transmit accepted\n", + __FILE__,__LINE__,info->device_name); + ret = count; + info->xmit_cnt = count; + mgsl_load_tx_dma_buffer(info,buf,count); + } + } else { + while (1) { + spin_lock_irqsave(&info->irq_spinlock,flags); + c = min_t(int, count, + min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, + SERIAL_XMIT_SIZE - info->xmit_head)); + if (c <= 0) { + spin_unlock_irqrestore(&info->irq_spinlock,flags); + break; + } + memcpy(info->xmit_buf + info->xmit_head, buf, c); + info->xmit_head = ((info->xmit_head + c) & + (SERIAL_XMIT_SIZE-1)); + info->xmit_cnt += c; + spin_unlock_irqrestore(&info->irq_spinlock,flags); + buf += c; + count -= c; + ret += c; + } + } + + if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) { + spin_lock_irqsave(&info->irq_spinlock,flags); + if (!info->tx_active) + usc_start_transmitter(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + } +cleanup: + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):mgsl_write(%s) returning=%d\n", + __FILE__,__LINE__,info->device_name,ret); + + return ret; + +} /* end of mgsl_write() */ + +/* mgsl_write_room() + * + * Return the count of free bytes in transmit buffer + * + * Arguments: tty pointer to tty info structure + * Return Value: None + */ +static int mgsl_write_room(struct tty_struct *tty) +{ + struct mgsl_struct *info = tty->driver_data; + int ret; + + if (mgsl_paranoia_check(info, tty->name, "mgsl_write_room")) + return 0; + ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1; + if (ret < 0) + ret = 0; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_write_room(%s)=%d\n", + __FILE__,__LINE__, info->device_name,ret ); + + if ( info->params.mode == MGSL_MODE_HDLC || + info->params.mode == MGSL_MODE_RAW ) { + /* operating in synchronous (frame oriented) mode */ + if ( info->tx_active ) + return 0; + else + return HDLC_MAX_FRAME_SIZE; + } + + return ret; + +} /* end of mgsl_write_room() */ + +/* mgsl_chars_in_buffer() + * + * Return the count of bytes in transmit buffer + * + * Arguments: tty pointer to tty info structure + * Return Value: None + */ +static int mgsl_chars_in_buffer(struct tty_struct *tty) +{ + struct mgsl_struct *info = tty->driver_data; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_chars_in_buffer(%s)\n", + __FILE__,__LINE__, info->device_name ); + + if (mgsl_paranoia_check(info, tty->name, "mgsl_chars_in_buffer")) + return 0; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_chars_in_buffer(%s)=%d\n", + __FILE__,__LINE__, info->device_name,info->xmit_cnt ); + + if ( info->params.mode == MGSL_MODE_HDLC || + info->params.mode == MGSL_MODE_RAW ) { + /* operating in synchronous (frame oriented) mode */ + if ( info->tx_active ) + return info->max_frame_size; + else + return 0; + } + + return info->xmit_cnt; +} /* end of mgsl_chars_in_buffer() */ + +/* mgsl_flush_buffer() + * + * Discard all data in the send buffer + * + * Arguments: tty pointer to tty info structure + * Return Value: None + */ +static void mgsl_flush_buffer(struct tty_struct *tty) +{ + struct mgsl_struct *info = tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_flush_buffer(%s) entry\n", + __FILE__,__LINE__, info->device_name ); + + if (mgsl_paranoia_check(info, tty->name, "mgsl_flush_buffer")) + return; + + spin_lock_irqsave(&info->irq_spinlock,flags); + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + del_timer(&info->tx_timer); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + tty_wakeup(tty); +} + +/* mgsl_send_xchar() + * + * Send a high-priority XON/XOFF character + * + * Arguments: tty pointer to tty info structure + * ch character to send + * Return Value: None + */ +static void mgsl_send_xchar(struct tty_struct *tty, char ch) +{ + struct mgsl_struct *info = tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_send_xchar(%s,%d)\n", + __FILE__,__LINE__, info->device_name, ch ); + + if (mgsl_paranoia_check(info, tty->name, "mgsl_send_xchar")) + return; + + info->x_char = ch; + if (ch) { + /* Make sure transmit interrupts are on */ + spin_lock_irqsave(&info->irq_spinlock,flags); + if (!info->tx_enabled) + usc_start_transmitter(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + } +} /* end of mgsl_send_xchar() */ + +/* mgsl_throttle() + * + * Signal remote device to throttle send data (our receive data) + * + * Arguments: tty pointer to tty info structure + * Return Value: None + */ +static void mgsl_throttle(struct tty_struct * tty) +{ + struct mgsl_struct *info = tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_throttle(%s) entry\n", + __FILE__,__LINE__, info->device_name ); + + if (mgsl_paranoia_check(info, tty->name, "mgsl_throttle")) + return; + + if (I_IXOFF(tty)) + mgsl_send_xchar(tty, STOP_CHAR(tty)); + + if (C_CRTSCTS(tty)) { + spin_lock_irqsave(&info->irq_spinlock,flags); + info->serial_signals &= ~SerialSignal_RTS; + usc_set_serial_signals(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + } +} /* end of mgsl_throttle() */ + +/* mgsl_unthrottle() + * + * Signal remote device to stop throttling send data (our receive data) + * + * Arguments: tty pointer to tty info structure + * Return Value: None + */ +static void mgsl_unthrottle(struct tty_struct * tty) +{ + struct mgsl_struct *info = tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_unthrottle(%s) entry\n", + __FILE__,__LINE__, info->device_name ); + + if (mgsl_paranoia_check(info, tty->name, "mgsl_unthrottle")) + return; + + if (I_IXOFF(tty)) { + if (info->x_char) + info->x_char = 0; + else + mgsl_send_xchar(tty, START_CHAR(tty)); + } + + if (C_CRTSCTS(tty)) { + spin_lock_irqsave(&info->irq_spinlock,flags); + info->serial_signals |= SerialSignal_RTS; + usc_set_serial_signals(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + } + +} /* end of mgsl_unthrottle() */ + +/* mgsl_get_stats() + * + * get the current serial parameters information + * + * Arguments: info pointer to device instance data + * user_icount pointer to buffer to hold returned stats + * + * Return Value: 0 if success, otherwise error code + */ +static int mgsl_get_stats(struct mgsl_struct * info, struct mgsl_icount __user *user_icount) +{ + int err; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_get_params(%s)\n", + __FILE__,__LINE__, info->device_name); + + if (!user_icount) { + memset(&info->icount, 0, sizeof(info->icount)); + } else { + mutex_lock(&info->port.mutex); + COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount)); + mutex_unlock(&info->port.mutex); + if (err) + return -EFAULT; + } + + return 0; + +} /* end of mgsl_get_stats() */ + +/* mgsl_get_params() + * + * get the current serial parameters information + * + * Arguments: info pointer to device instance data + * user_params pointer to buffer to hold returned params + * + * Return Value: 0 if success, otherwise error code + */ +static int mgsl_get_params(struct mgsl_struct * info, MGSL_PARAMS __user *user_params) +{ + int err; + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_get_params(%s)\n", + __FILE__,__LINE__, info->device_name); + + mutex_lock(&info->port.mutex); + COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS)); + mutex_unlock(&info->port.mutex); + if (err) { + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):mgsl_get_params(%s) user buffer copy failed\n", + __FILE__,__LINE__,info->device_name); + return -EFAULT; + } + + return 0; + +} /* end of mgsl_get_params() */ + +/* mgsl_set_params() + * + * set the serial parameters + * + * Arguments: + * + * info pointer to device instance data + * new_params user buffer containing new serial params + * + * Return Value: 0 if success, otherwise error code + */ +static int mgsl_set_params(struct mgsl_struct * info, MGSL_PARAMS __user *new_params) +{ + unsigned long flags; + MGSL_PARAMS tmp_params; + int err; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_set_params %s\n", __FILE__,__LINE__, + info->device_name ); + COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS)); + if (err) { + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):mgsl_set_params(%s) user buffer copy failed\n", + __FILE__,__LINE__,info->device_name); + return -EFAULT; + } + + mutex_lock(&info->port.mutex); + spin_lock_irqsave(&info->irq_spinlock,flags); + memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS)); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + mgsl_change_params(info); + mutex_unlock(&info->port.mutex); + + return 0; + +} /* end of mgsl_set_params() */ + +/* mgsl_get_txidle() + * + * get the current transmit idle mode + * + * Arguments: info pointer to device instance data + * idle_mode pointer to buffer to hold returned idle mode + * + * Return Value: 0 if success, otherwise error code + */ +static int mgsl_get_txidle(struct mgsl_struct * info, int __user *idle_mode) +{ + int err; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_get_txidle(%s)=%d\n", + __FILE__,__LINE__, info->device_name, info->idle_mode); + + COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int)); + if (err) { + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):mgsl_get_txidle(%s) user buffer copy failed\n", + __FILE__,__LINE__,info->device_name); + return -EFAULT; + } + + return 0; + +} /* end of mgsl_get_txidle() */ + +/* mgsl_set_txidle() service ioctl to set transmit idle mode + * + * Arguments: info pointer to device instance data + * idle_mode new idle mode + * + * Return Value: 0 if success, otherwise error code + */ +static int mgsl_set_txidle(struct mgsl_struct * info, int idle_mode) +{ + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_set_txidle(%s,%d)\n", __FILE__,__LINE__, + info->device_name, idle_mode ); + + spin_lock_irqsave(&info->irq_spinlock,flags); + info->idle_mode = idle_mode; + usc_set_txidle( info ); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + return 0; + +} /* end of mgsl_set_txidle() */ + +/* mgsl_txenable() + * + * enable or disable the transmitter + * + * Arguments: + * + * info pointer to device instance data + * enable 1 = enable, 0 = disable + * + * Return Value: 0 if success, otherwise error code + */ +static int mgsl_txenable(struct mgsl_struct * info, int enable) +{ + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_txenable(%s,%d)\n", __FILE__,__LINE__, + info->device_name, enable); + + spin_lock_irqsave(&info->irq_spinlock,flags); + if ( enable ) { + if ( !info->tx_enabled ) { + + usc_start_transmitter(info); + /*-------------------------------------------------- + * if HDLC/SDLC Loop mode, attempt to insert the + * station in the 'loop' by setting CMR:13. Upon + * receipt of the next GoAhead (RxAbort) sequence, + * the OnLoop indicator (CCSR:7) should go active + * to indicate that we are on the loop + *--------------------------------------------------*/ + if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE ) + usc_loopmode_insert_request( info ); + } + } else { + if ( info->tx_enabled ) + usc_stop_transmitter(info); + } + spin_unlock_irqrestore(&info->irq_spinlock,flags); + return 0; + +} /* end of mgsl_txenable() */ + +/* mgsl_txabort() abort send HDLC frame + * + * Arguments: info pointer to device instance data + * Return Value: 0 if success, otherwise error code + */ +static int mgsl_txabort(struct mgsl_struct * info) +{ + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_txabort(%s)\n", __FILE__,__LINE__, + info->device_name); + + spin_lock_irqsave(&info->irq_spinlock,flags); + if ( info->tx_active && info->params.mode == MGSL_MODE_HDLC ) + { + if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE ) + usc_loopmode_cancel_transmit( info ); + else + usc_TCmd(info,TCmd_SendAbort); + } + spin_unlock_irqrestore(&info->irq_spinlock,flags); + return 0; + +} /* end of mgsl_txabort() */ + +/* mgsl_rxenable() enable or disable the receiver + * + * Arguments: info pointer to device instance data + * enable 1 = enable, 0 = disable + * Return Value: 0 if success, otherwise error code + */ +static int mgsl_rxenable(struct mgsl_struct * info, int enable) +{ + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_rxenable(%s,%d)\n", __FILE__,__LINE__, + info->device_name, enable); + + spin_lock_irqsave(&info->irq_spinlock,flags); + if ( enable ) { + if ( !info->rx_enabled ) + usc_start_receiver(info); + } else { + if ( info->rx_enabled ) + usc_stop_receiver(info); + } + spin_unlock_irqrestore(&info->irq_spinlock,flags); + return 0; + +} /* end of mgsl_rxenable() */ + +/* mgsl_wait_event() wait for specified event to occur + * + * Arguments: info pointer to device instance data + * mask pointer to bitmask of events to wait for + * Return Value: 0 if successful and bit mask updated with + * of events triggerred, + * otherwise error code + */ +static int mgsl_wait_event(struct mgsl_struct * info, int __user * mask_ptr) +{ + unsigned long flags; + int s; + int rc=0; + struct mgsl_icount cprev, cnow; + int events; + int mask; + struct _input_signal_events oldsigs, newsigs; + DECLARE_WAITQUEUE(wait, current); + + COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int)); + if (rc) { + return -EFAULT; + } + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_wait_event(%s,%d)\n", __FILE__,__LINE__, + info->device_name, mask); + + spin_lock_irqsave(&info->irq_spinlock,flags); + + /* return immediately if state matches requested events */ + usc_get_serial_signals(info); + s = info->serial_signals; + events = mask & + ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) + + ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) + + ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) + + ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) ); + if (events) { + spin_unlock_irqrestore(&info->irq_spinlock,flags); + goto exit; + } + + /* save current irq counts */ + cprev = info->icount; + oldsigs = info->input_signal_events; + + /* enable hunt and idle irqs if needed */ + if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) { + u16 oldreg = usc_InReg(info,RICR); + u16 newreg = oldreg + + (mask & MgslEvent_ExitHuntMode ? RXSTATUS_EXITED_HUNT:0) + + (mask & MgslEvent_IdleReceived ? RXSTATUS_IDLE_RECEIVED:0); + if (oldreg != newreg) + usc_OutReg(info, RICR, newreg); + } + + set_current_state(TASK_INTERRUPTIBLE); + add_wait_queue(&info->event_wait_q, &wait); + + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + + for(;;) { + schedule(); + if (signal_pending(current)) { + rc = -ERESTARTSYS; + break; + } + + /* get current irq counts */ + spin_lock_irqsave(&info->irq_spinlock,flags); + cnow = info->icount; + newsigs = info->input_signal_events; + set_current_state(TASK_INTERRUPTIBLE); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + /* if no change, wait aborted for some reason */ + if (newsigs.dsr_up == oldsigs.dsr_up && + newsigs.dsr_down == oldsigs.dsr_down && + newsigs.dcd_up == oldsigs.dcd_up && + newsigs.dcd_down == oldsigs.dcd_down && + newsigs.cts_up == oldsigs.cts_up && + newsigs.cts_down == oldsigs.cts_down && + newsigs.ri_up == oldsigs.ri_up && + newsigs.ri_down == oldsigs.ri_down && + cnow.exithunt == cprev.exithunt && + cnow.rxidle == cprev.rxidle) { + rc = -EIO; + break; + } + + events = mask & + ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) + + (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) + + (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) + + (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) + + (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) + + (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) + + (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) + + (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) + + (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) + + (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) ); + if (events) + break; + + cprev = cnow; + oldsigs = newsigs; + } + + remove_wait_queue(&info->event_wait_q, &wait); + set_current_state(TASK_RUNNING); + + if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) { + spin_lock_irqsave(&info->irq_spinlock,flags); + if (!waitqueue_active(&info->event_wait_q)) { + /* disable enable exit hunt mode/idle rcvd IRQs */ + usc_OutReg(info, RICR, usc_InReg(info,RICR) & + ~(RXSTATUS_EXITED_HUNT | RXSTATUS_IDLE_RECEIVED)); + } + spin_unlock_irqrestore(&info->irq_spinlock,flags); + } +exit: + if ( rc == 0 ) + PUT_USER(rc, events, mask_ptr); + + return rc; + +} /* end of mgsl_wait_event() */ + +static int modem_input_wait(struct mgsl_struct *info,int arg) +{ + unsigned long flags; + int rc; + struct mgsl_icount cprev, cnow; + DECLARE_WAITQUEUE(wait, current); + + /* save current irq counts */ + spin_lock_irqsave(&info->irq_spinlock,flags); + cprev = info->icount; + add_wait_queue(&info->status_event_wait_q, &wait); + set_current_state(TASK_INTERRUPTIBLE); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + for(;;) { + schedule(); + if (signal_pending(current)) { + rc = -ERESTARTSYS; + break; + } + + /* get new irq counts */ + spin_lock_irqsave(&info->irq_spinlock,flags); + cnow = info->icount; + set_current_state(TASK_INTERRUPTIBLE); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + /* if no change, wait aborted for some reason */ + if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && + cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) { + rc = -EIO; + break; + } + + /* check for change in caller specified modem input */ + if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) || + (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) || + (arg & TIOCM_CD && cnow.dcd != cprev.dcd) || + (arg & TIOCM_CTS && cnow.cts != cprev.cts)) { + rc = 0; + break; + } + + cprev = cnow; + } + remove_wait_queue(&info->status_event_wait_q, &wait); + set_current_state(TASK_RUNNING); + return rc; +} + +/* return the state of the serial control and status signals + */ +static int tiocmget(struct tty_struct *tty) +{ + struct mgsl_struct *info = tty->driver_data; + unsigned int result; + unsigned long flags; + + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_get_serial_signals(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) + + ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) + + ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR:0) + + ((info->serial_signals & SerialSignal_RI) ? TIOCM_RNG:0) + + ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR:0) + + ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS:0); + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s tiocmget() value=%08X\n", + __FILE__,__LINE__, info->device_name, result ); + return result; +} + +/* set modem control signals (DTR/RTS) + */ +static int tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct mgsl_struct *info = tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s tiocmset(%x,%x)\n", + __FILE__,__LINE__,info->device_name, set, clear); + + if (set & TIOCM_RTS) + info->serial_signals |= SerialSignal_RTS; + if (set & TIOCM_DTR) + info->serial_signals |= SerialSignal_DTR; + if (clear & TIOCM_RTS) + info->serial_signals &= ~SerialSignal_RTS; + if (clear & TIOCM_DTR) + info->serial_signals &= ~SerialSignal_DTR; + + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_set_serial_signals(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + return 0; +} + +/* mgsl_break() Set or clear transmit break condition + * + * Arguments: tty pointer to tty instance data + * break_state -1=set break condition, 0=clear + * Return Value: error code + */ +static int mgsl_break(struct tty_struct *tty, int break_state) +{ + struct mgsl_struct * info = tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_break(%s,%d)\n", + __FILE__,__LINE__, info->device_name, break_state); + + if (mgsl_paranoia_check(info, tty->name, "mgsl_break")) + return -EINVAL; + + spin_lock_irqsave(&info->irq_spinlock,flags); + if (break_state == -1) + usc_OutReg(info,IOCR,(u16)(usc_InReg(info,IOCR) | BIT7)); + else + usc_OutReg(info,IOCR,(u16)(usc_InReg(info,IOCR) & ~BIT7)); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + return 0; + +} /* end of mgsl_break() */ + +/* + * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) + * Return: write counters to the user passed counter struct + * NB: both 1->0 and 0->1 transitions are counted except for + * RI where only 0->1 is counted. + */ +static int msgl_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount) + +{ + struct mgsl_struct * info = tty->driver_data; + struct mgsl_icount cnow; /* kernel counter temps */ + unsigned long flags; + + spin_lock_irqsave(&info->irq_spinlock,flags); + cnow = info->icount; + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + icount->cts = cnow.cts; + icount->dsr = cnow.dsr; + icount->rng = cnow.rng; + icount->dcd = cnow.dcd; + icount->rx = cnow.rx; + icount->tx = cnow.tx; + icount->frame = cnow.frame; + icount->overrun = cnow.overrun; + icount->parity = cnow.parity; + icount->brk = cnow.brk; + icount->buf_overrun = cnow.buf_overrun; + return 0; +} + +/* mgsl_ioctl() Service an IOCTL request + * + * Arguments: + * + * tty pointer to tty instance data + * cmd IOCTL command code + * arg command argument/context + * + * Return Value: 0 if success, otherwise error code + */ +static int mgsl_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct mgsl_struct * info = tty->driver_data; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_ioctl %s cmd=%08X\n", __FILE__,__LINE__, + info->device_name, cmd ); + + if (mgsl_paranoia_check(info, tty->name, "mgsl_ioctl")) + return -ENODEV; + + if (cmd != TIOCMIWAIT) { + if (tty_io_error(tty)) + return -EIO; + } + + return mgsl_ioctl_common(info, cmd, arg); +} + +static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg) +{ + void __user *argp = (void __user *)arg; + + switch (cmd) { + case MGSL_IOCGPARAMS: + return mgsl_get_params(info, argp); + case MGSL_IOCSPARAMS: + return mgsl_set_params(info, argp); + case MGSL_IOCGTXIDLE: + return mgsl_get_txidle(info, argp); + case MGSL_IOCSTXIDLE: + return mgsl_set_txidle(info,(int)arg); + case MGSL_IOCTXENABLE: + return mgsl_txenable(info,(int)arg); + case MGSL_IOCRXENABLE: + return mgsl_rxenable(info,(int)arg); + case MGSL_IOCTXABORT: + return mgsl_txabort(info); + case MGSL_IOCGSTATS: + return mgsl_get_stats(info, argp); + case MGSL_IOCWAITEVENT: + return mgsl_wait_event(info, argp); + case MGSL_IOCLOOPTXDONE: + return mgsl_loopmode_send_done(info); + /* Wait for modem input (DCD,RI,DSR,CTS) change + * as specified by mask in arg (TIOCM_RNG/DSR/CD/CTS) + */ + case TIOCMIWAIT: + return modem_input_wait(info,(int)arg); + + default: + return -ENOIOCTLCMD; + } + return 0; +} + +/* mgsl_set_termios() + * + * Set new termios settings + * + * Arguments: + * + * tty pointer to tty structure + * termios pointer to buffer to hold returned old termios + * + * Return Value: None + */ +static void mgsl_set_termios(struct tty_struct *tty, struct ktermios *old_termios) +{ + struct mgsl_struct *info = tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_set_termios %s\n", __FILE__,__LINE__, + tty->driver->name ); + + mgsl_change_params(info); + + /* Handle transition to B0 status */ + if ((old_termios->c_cflag & CBAUD) && !C_BAUD(tty)) { + info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR); + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_set_serial_signals(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + } + + /* Handle transition away from B0 status */ + if (!(old_termios->c_cflag & CBAUD) && C_BAUD(tty)) { + info->serial_signals |= SerialSignal_DTR; + if (!C_CRTSCTS(tty) || !tty_throttled(tty)) + info->serial_signals |= SerialSignal_RTS; + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_set_serial_signals(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + } + + /* Handle turning off CRTSCTS */ + if (old_termios->c_cflag & CRTSCTS && !C_CRTSCTS(tty)) { + tty->hw_stopped = 0; + mgsl_start(tty); + } + +} /* end of mgsl_set_termios() */ + +/* mgsl_close() + * + * Called when port is closed. Wait for remaining data to be + * sent. Disable port and free resources. + * + * Arguments: + * + * tty pointer to open tty structure + * filp pointer to open file object + * + * Return Value: None + */ +static void mgsl_close(struct tty_struct *tty, struct file * filp) +{ + struct mgsl_struct * info = tty->driver_data; + + if (mgsl_paranoia_check(info, tty->name, "mgsl_close")) + return; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_close(%s) entry, count=%d\n", + __FILE__,__LINE__, info->device_name, info->port.count); + + if (tty_port_close_start(&info->port, tty, filp) == 0) + goto cleanup; + + mutex_lock(&info->port.mutex); + if (tty_port_initialized(&info->port)) + mgsl_wait_until_sent(tty, info->timeout); + mgsl_flush_buffer(tty); + tty_ldisc_flush(tty); + shutdown(info); + mutex_unlock(&info->port.mutex); + + tty_port_close_end(&info->port, tty); + info->port.tty = NULL; +cleanup: + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_close(%s) exit, count=%d\n", __FILE__,__LINE__, + tty->driver->name, info->port.count); + +} /* end of mgsl_close() */ + +/* mgsl_wait_until_sent() + * + * Wait until the transmitter is empty. + * + * Arguments: + * + * tty pointer to tty info structure + * timeout time to wait for send completion + * + * Return Value: None + */ +static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout) +{ + struct mgsl_struct * info = tty->driver_data; + unsigned long orig_jiffies, char_time; + + if (!info ) + return; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_wait_until_sent(%s) entry\n", + __FILE__,__LINE__, info->device_name ); + + if (mgsl_paranoia_check(info, tty->name, "mgsl_wait_until_sent")) + return; + + if (!tty_port_initialized(&info->port)) + goto exit; + + orig_jiffies = jiffies; + + /* Set check interval to 1/5 of estimated time to + * send a character, and make it at least 1. The check + * interval should also be less than the timeout. + * Note: use tight timings here to satisfy the NIST-PCTS. + */ + + if ( info->params.data_rate ) { + char_time = info->timeout/(32 * 5); + if (!char_time) + char_time++; + } else + char_time = 1; + + if (timeout) + char_time = min_t(unsigned long, char_time, timeout); + + if ( info->params.mode == MGSL_MODE_HDLC || + info->params.mode == MGSL_MODE_RAW ) { + while (info->tx_active) { + msleep_interruptible(jiffies_to_msecs(char_time)); + if (signal_pending(current)) + break; + if (timeout && time_after(jiffies, orig_jiffies + timeout)) + break; + } + } else { + while (!(usc_InReg(info,TCSR) & TXSTATUS_ALL_SENT) && + info->tx_enabled) { + msleep_interruptible(jiffies_to_msecs(char_time)); + if (signal_pending(current)) + break; + if (timeout && time_after(jiffies, orig_jiffies + timeout)) + break; + } + } + +exit: + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_wait_until_sent(%s) exit\n", + __FILE__,__LINE__, info->device_name ); + +} /* end of mgsl_wait_until_sent() */ + +/* mgsl_hangup() + * + * Called by tty_hangup() when a hangup is signaled. + * This is the same as to closing all open files for the port. + * + * Arguments: tty pointer to associated tty object + * Return Value: None + */ +static void mgsl_hangup(struct tty_struct *tty) +{ + struct mgsl_struct * info = tty->driver_data; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_hangup(%s)\n", + __FILE__,__LINE__, info->device_name ); + + if (mgsl_paranoia_check(info, tty->name, "mgsl_hangup")) + return; + + mgsl_flush_buffer(tty); + shutdown(info); + + info->port.count = 0; + tty_port_set_active(&info->port, 0); + info->port.tty = NULL; + + wake_up_interruptible(&info->port.open_wait); + +} /* end of mgsl_hangup() */ + +/* + * carrier_raised() + * + * Return true if carrier is raised + */ + +static int carrier_raised(struct tty_port *port) +{ + unsigned long flags; + struct mgsl_struct *info = container_of(port, struct mgsl_struct, port); + + spin_lock_irqsave(&info->irq_spinlock, flags); + usc_get_serial_signals(info); + spin_unlock_irqrestore(&info->irq_spinlock, flags); + return (info->serial_signals & SerialSignal_DCD) ? 1 : 0; +} + +static void dtr_rts(struct tty_port *port, int on) +{ + struct mgsl_struct *info = container_of(port, struct mgsl_struct, port); + unsigned long flags; + + spin_lock_irqsave(&info->irq_spinlock,flags); + if (on) + info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR; + else + info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR); + usc_set_serial_signals(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); +} + + +/* block_til_ready() + * + * Block the current process until the specified port + * is ready to be opened. + * + * Arguments: + * + * tty pointer to tty info structure + * filp pointer to open file object + * info pointer to device instance data + * + * Return Value: 0 if success, otherwise error code + */ +static int block_til_ready(struct tty_struct *tty, struct file * filp, + struct mgsl_struct *info) +{ + DECLARE_WAITQUEUE(wait, current); + int retval; + bool do_clocal = false; + unsigned long flags; + int dcd; + struct tty_port *port = &info->port; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):block_til_ready on %s\n", + __FILE__,__LINE__, tty->driver->name ); + + if (filp->f_flags & O_NONBLOCK || tty_io_error(tty)) { + /* nonblock mode is set or port is not enabled */ + tty_port_set_active(port, 1); + return 0; + } + + if (C_CLOCAL(tty)) + do_clocal = true; + + /* Wait for carrier detect and the line to become + * free (i.e., not in use by the callout). While we are in + * this loop, port->count is dropped by one, so that + * mgsl_close() knows when to free things. We restore it upon + * exit, either normal or abnormal. + */ + + retval = 0; + add_wait_queue(&port->open_wait, &wait); + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):block_til_ready before block on %s count=%d\n", + __FILE__,__LINE__, tty->driver->name, port->count ); + + spin_lock_irqsave(&info->irq_spinlock, flags); + port->count--; + spin_unlock_irqrestore(&info->irq_spinlock, flags); + port->blocked_open++; + + while (1) { + if (C_BAUD(tty) && tty_port_initialized(port)) + tty_port_raise_dtr_rts(port); + + set_current_state(TASK_INTERRUPTIBLE); + + if (tty_hung_up_p(filp) || !tty_port_initialized(port)) { + retval = (port->flags & ASYNC_HUP_NOTIFY) ? + -EAGAIN : -ERESTARTSYS; + break; + } + + dcd = tty_port_carrier_raised(&info->port); + if (do_clocal || dcd) + break; + + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):block_til_ready blocking on %s count=%d\n", + __FILE__,__LINE__, tty->driver->name, port->count ); + + tty_unlock(tty); + schedule(); + tty_lock(tty); + } + + set_current_state(TASK_RUNNING); + remove_wait_queue(&port->open_wait, &wait); + + /* FIXME: Racy on hangup during close wait */ + if (!tty_hung_up_p(filp)) + port->count++; + port->blocked_open--; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):block_til_ready after blocking on %s count=%d\n", + __FILE__,__LINE__, tty->driver->name, port->count ); + + if (!retval) + tty_port_set_active(port, 1); + + return retval; + +} /* end of block_til_ready() */ + +static int mgsl_install(struct tty_driver *driver, struct tty_struct *tty) +{ + struct mgsl_struct *info; + int line = tty->index; + + /* verify range of specified line number */ + if (line >= mgsl_device_count) { + printk("%s(%d):mgsl_open with invalid line #%d.\n", + __FILE__, __LINE__, line); + return -ENODEV; + } + + /* find the info structure for the specified line */ + info = mgsl_device_list; + while (info && info->line != line) + info = info->next_device; + if (mgsl_paranoia_check(info, tty->name, "mgsl_open")) + return -ENODEV; + tty->driver_data = info; + + return tty_port_install(&info->port, driver, tty); +} + +/* mgsl_open() + * + * Called when a port is opened. Init and enable port. + * Perform serial-specific initialization for the tty structure. + * + * Arguments: tty pointer to tty info structure + * filp associated file pointer + * + * Return Value: 0 if success, otherwise error code + */ +static int mgsl_open(struct tty_struct *tty, struct file * filp) +{ + struct mgsl_struct *info = tty->driver_data; + unsigned long flags; + int retval; + + info->port.tty = tty; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_open(%s), old ref count = %d\n", + __FILE__,__LINE__,tty->driver->name, info->port.count); + + info->port.low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0; + + spin_lock_irqsave(&info->netlock, flags); + if (info->netcount) { + retval = -EBUSY; + spin_unlock_irqrestore(&info->netlock, flags); + goto cleanup; + } + info->port.count++; + spin_unlock_irqrestore(&info->netlock, flags); + + if (info->port.count == 1) { + /* 1st open on this device, init hardware */ + retval = startup(info); + if (retval < 0) + goto cleanup; + } + + retval = block_til_ready(tty, filp, info); + if (retval) { + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):block_til_ready(%s) returned %d\n", + __FILE__,__LINE__, info->device_name, retval); + goto cleanup; + } + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_open(%s) success\n", + __FILE__,__LINE__, info->device_name); + retval = 0; + +cleanup: + if (retval) { + if (tty->count == 1) + info->port.tty = NULL; /* tty layer will release tty struct */ + if(info->port.count) + info->port.count--; + } + + return retval; + +} /* end of mgsl_open() */ + +/* + * /proc fs routines.... + */ + +static inline void line_info(struct seq_file *m, struct mgsl_struct *info) +{ + char stat_buf[30]; + unsigned long flags; + + seq_printf(m, "%s:PCI io:%04X irq:%d mem:%08X lcr:%08X", + info->device_name, info->io_base, info->irq_level, + info->phys_memory_base, info->phys_lcr_base); + + /* output current serial signal states */ + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_get_serial_signals(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + stat_buf[0] = 0; + stat_buf[1] = 0; + if (info->serial_signals & SerialSignal_RTS) + strcat(stat_buf, "|RTS"); + if (info->serial_signals & SerialSignal_CTS) + strcat(stat_buf, "|CTS"); + if (info->serial_signals & SerialSignal_DTR) + strcat(stat_buf, "|DTR"); + if (info->serial_signals & SerialSignal_DSR) + strcat(stat_buf, "|DSR"); + if (info->serial_signals & SerialSignal_DCD) + strcat(stat_buf, "|CD"); + if (info->serial_signals & SerialSignal_RI) + strcat(stat_buf, "|RI"); + + if (info->params.mode == MGSL_MODE_HDLC || + info->params.mode == MGSL_MODE_RAW ) { + seq_printf(m, " HDLC txok:%d rxok:%d", + info->icount.txok, info->icount.rxok); + if (info->icount.txunder) + seq_printf(m, " txunder:%d", info->icount.txunder); + if (info->icount.txabort) + seq_printf(m, " txabort:%d", info->icount.txabort); + if (info->icount.rxshort) + seq_printf(m, " rxshort:%d", info->icount.rxshort); + if (info->icount.rxlong) + seq_printf(m, " rxlong:%d", info->icount.rxlong); + if (info->icount.rxover) + seq_printf(m, " rxover:%d", info->icount.rxover); + if (info->icount.rxcrc) + seq_printf(m, " rxcrc:%d", info->icount.rxcrc); + } else { + seq_printf(m, " ASYNC tx:%d rx:%d", + info->icount.tx, info->icount.rx); + if (info->icount.frame) + seq_printf(m, " fe:%d", info->icount.frame); + if (info->icount.parity) + seq_printf(m, " pe:%d", info->icount.parity); + if (info->icount.brk) + seq_printf(m, " brk:%d", info->icount.brk); + if (info->icount.overrun) + seq_printf(m, " oe:%d", info->icount.overrun); + } + + /* Append serial signal status to end */ + seq_printf(m, " %s\n", stat_buf+1); + + seq_printf(m, "txactive=%d bh_req=%d bh_run=%d pending_bh=%x\n", + info->tx_active,info->bh_requested,info->bh_running, + info->pending_bh); + + spin_lock_irqsave(&info->irq_spinlock,flags); + { + u16 Tcsr = usc_InReg( info, TCSR ); + u16 Tdmr = usc_InDmaReg( info, TDMR ); + u16 Ticr = usc_InReg( info, TICR ); + u16 Rscr = usc_InReg( info, RCSR ); + u16 Rdmr = usc_InDmaReg( info, RDMR ); + u16 Ricr = usc_InReg( info, RICR ); + u16 Icr = usc_InReg( info, ICR ); + u16 Dccr = usc_InReg( info, DCCR ); + u16 Tmr = usc_InReg( info, TMR ); + u16 Tccr = usc_InReg( info, TCCR ); + u16 Ccar = inw( info->io_base + CCAR ); + seq_printf(m, "tcsr=%04X tdmr=%04X ticr=%04X rcsr=%04X rdmr=%04X\n" + "ricr=%04X icr =%04X dccr=%04X tmr=%04X tccr=%04X ccar=%04X\n", + Tcsr,Tdmr,Ticr,Rscr,Rdmr,Ricr,Icr,Dccr,Tmr,Tccr,Ccar ); + } + spin_unlock_irqrestore(&info->irq_spinlock,flags); +} + +/* Called to print information about devices */ +static int mgsl_proc_show(struct seq_file *m, void *v) +{ + struct mgsl_struct *info; + + seq_printf(m, "synclink driver:%s\n", driver_version); + + info = mgsl_device_list; + while( info ) { + line_info(m, info); + info = info->next_device; + } + return 0; +} + +/* mgsl_allocate_dma_buffers() + * + * Allocate and format DMA buffers (ISA adapter) + * or format shared memory buffers (PCI adapter). + * + * Arguments: info pointer to device instance data + * Return Value: 0 if success, otherwise error + */ +static int mgsl_allocate_dma_buffers(struct mgsl_struct *info) +{ + unsigned short BuffersPerFrame; + + info->last_mem_alloc = 0; + + /* Calculate the number of DMA buffers necessary to hold the */ + /* largest allowable frame size. Note: If the max frame size is */ + /* not an even multiple of the DMA buffer size then we need to */ + /* round the buffer count per frame up one. */ + + BuffersPerFrame = (unsigned short)(info->max_frame_size/DMABUFFERSIZE); + if ( info->max_frame_size % DMABUFFERSIZE ) + BuffersPerFrame++; + + /* + * The PCI adapter has 256KBytes of shared memory to use. This is 64 + * PAGE_SIZE buffers. + * + * The first page is used for padding at this time so the buffer list + * does not begin at offset 0 of the PCI adapter's shared memory. + * + * The 2nd page is used for the buffer list. A 4K buffer list can hold + * 128 DMA_BUFFER structures at 32 bytes each. + * + * This leaves 62 4K pages. + * + * The next N pages are used for transmit frame(s). We reserve enough + * 4K page blocks to hold the required number of transmit dma buffers + * (num_tx_dma_buffers), each of MaxFrameSize size. + * + * Of the remaining pages (62-N), determine how many can be used to + * receive full MaxFrameSize inbound frames + */ + info->tx_buffer_count = info->num_tx_dma_buffers * BuffersPerFrame; + info->rx_buffer_count = 62 - info->tx_buffer_count; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk("%s(%d):Allocating %d TX and %d RX DMA buffers.\n", + __FILE__,__LINE__, info->tx_buffer_count,info->rx_buffer_count); + + if ( mgsl_alloc_buffer_list_memory( info ) < 0 || + mgsl_alloc_frame_memory(info, info->rx_buffer_list, info->rx_buffer_count) < 0 || + mgsl_alloc_frame_memory(info, info->tx_buffer_list, info->tx_buffer_count) < 0 || + mgsl_alloc_intermediate_rxbuffer_memory(info) < 0 || + mgsl_alloc_intermediate_txbuffer_memory(info) < 0 ) { + printk("%s(%d):Can't allocate DMA buffer memory\n",__FILE__,__LINE__); + return -ENOMEM; + } + + mgsl_reset_rx_dma_buffers( info ); + mgsl_reset_tx_dma_buffers( info ); + + return 0; + +} /* end of mgsl_allocate_dma_buffers() */ + +/* + * mgsl_alloc_buffer_list_memory() + * + * Allocate a common DMA buffer for use as the + * receive and transmit buffer lists. + * + * A buffer list is a set of buffer entries where each entry contains + * a pointer to an actual buffer and a pointer to the next buffer entry + * (plus some other info about the buffer). + * + * The buffer entries for a list are built to form a circular list so + * that when the entire list has been traversed you start back at the + * beginning. + * + * This function allocates memory for just the buffer entries. + * The links (pointer to next entry) are filled in with the physical + * address of the next entry so the adapter can navigate the list + * using bus master DMA. The pointers to the actual buffers are filled + * out later when the actual buffers are allocated. + * + * Arguments: info pointer to device instance data + * Return Value: 0 if success, otherwise error + */ +static int mgsl_alloc_buffer_list_memory( struct mgsl_struct *info ) +{ + unsigned int i; + + /* PCI adapter uses shared memory. */ + info->buffer_list = info->memory_base + info->last_mem_alloc; + info->buffer_list_phys = info->last_mem_alloc; + info->last_mem_alloc += BUFFERLISTSIZE; + + /* We got the memory for the buffer entry lists. */ + /* Initialize the memory block to all zeros. */ + memset( info->buffer_list, 0, BUFFERLISTSIZE ); + + /* Save virtual address pointers to the receive and */ + /* transmit buffer lists. (Receive 1st). These pointers will */ + /* be used by the processor to access the lists. */ + info->rx_buffer_list = (DMABUFFERENTRY *)info->buffer_list; + info->tx_buffer_list = (DMABUFFERENTRY *)info->buffer_list; + info->tx_buffer_list += info->rx_buffer_count; + + /* + * Build the links for the buffer entry lists such that + * two circular lists are built. (Transmit and Receive). + * + * Note: the links are physical addresses + * which are read by the adapter to determine the next + * buffer entry to use. + */ + + for ( i = 0; i < info->rx_buffer_count; i++ ) { + /* calculate and store physical address of this buffer entry */ + info->rx_buffer_list[i].phys_entry = + info->buffer_list_phys + (i * sizeof(DMABUFFERENTRY)); + + /* calculate and store physical address of */ + /* next entry in cirular list of entries */ + + info->rx_buffer_list[i].link = info->buffer_list_phys; + + if ( i < info->rx_buffer_count - 1 ) + info->rx_buffer_list[i].link += (i + 1) * sizeof(DMABUFFERENTRY); + } + + for ( i = 0; i < info->tx_buffer_count; i++ ) { + /* calculate and store physical address of this buffer entry */ + info->tx_buffer_list[i].phys_entry = info->buffer_list_phys + + ((info->rx_buffer_count + i) * sizeof(DMABUFFERENTRY)); + + /* calculate and store physical address of */ + /* next entry in cirular list of entries */ + + info->tx_buffer_list[i].link = info->buffer_list_phys + + info->rx_buffer_count * sizeof(DMABUFFERENTRY); + + if ( i < info->tx_buffer_count - 1 ) + info->tx_buffer_list[i].link += (i + 1) * sizeof(DMABUFFERENTRY); + } + + return 0; + +} /* end of mgsl_alloc_buffer_list_memory() */ + +/* Free DMA buffers allocated for use as the + * receive and transmit buffer lists. + * Warning: + * + * The data transfer buffers associated with the buffer list + * MUST be freed before freeing the buffer list itself because + * the buffer list contains the information necessary to free + * the individual buffers! + */ +static void mgsl_free_buffer_list_memory( struct mgsl_struct *info ) +{ + info->buffer_list = NULL; + info->rx_buffer_list = NULL; + info->tx_buffer_list = NULL; + +} /* end of mgsl_free_buffer_list_memory() */ + +/* + * mgsl_alloc_frame_memory() + * + * Allocate the frame DMA buffers used by the specified buffer list. + * Each DMA buffer will be one memory page in size. This is necessary + * because memory can fragment enough that it may be impossible + * contiguous pages. + * + * Arguments: + * + * info pointer to device instance data + * BufferList pointer to list of buffer entries + * Buffercount count of buffer entries in buffer list + * + * Return Value: 0 if success, otherwise -ENOMEM + */ +static int mgsl_alloc_frame_memory(struct mgsl_struct *info,DMABUFFERENTRY *BufferList,int Buffercount) +{ + int i; + + /* Allocate page sized buffers for the receive buffer list */ + + for ( i = 0; i < Buffercount; i++ ) { + BufferList[i].virt_addr = info->memory_base + info->last_mem_alloc; + BufferList[i].phys_addr = info->last_mem_alloc; + info->last_mem_alloc += DMABUFFERSIZE; + } + + return 0; + +} /* end of mgsl_alloc_frame_memory() */ + +/* + * mgsl_free_frame_memory() + * + * Free the buffers associated with + * each buffer entry of a buffer list. + * + * Arguments: + * + * info pointer to device instance data + * BufferList pointer to list of buffer entries + * Buffercount count of buffer entries in buffer list + * + * Return Value: None + */ +static void mgsl_free_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList, int Buffercount) +{ + int i; + + if ( BufferList ) { + for ( i = 0 ; i < Buffercount ; i++ ) { + if ( BufferList[i].virt_addr ) { + BufferList[i].virt_addr = NULL; + } + } + } + +} /* end of mgsl_free_frame_memory() */ + +/* mgsl_free_dma_buffers() + * + * Free DMA buffers + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void mgsl_free_dma_buffers( struct mgsl_struct *info ) +{ + mgsl_free_frame_memory( info, info->rx_buffer_list, info->rx_buffer_count ); + mgsl_free_frame_memory( info, info->tx_buffer_list, info->tx_buffer_count ); + mgsl_free_buffer_list_memory( info ); + +} /* end of mgsl_free_dma_buffers() */ + + +/* + * mgsl_alloc_intermediate_rxbuffer_memory() + * + * Allocate a buffer large enough to hold max_frame_size. This buffer + * is used to pass an assembled frame to the line discipline. + * + * Arguments: + * + * info pointer to device instance data + * + * Return Value: 0 if success, otherwise -ENOMEM + */ +static int mgsl_alloc_intermediate_rxbuffer_memory(struct mgsl_struct *info) +{ + info->intermediate_rxbuffer = kmalloc(info->max_frame_size, GFP_KERNEL | GFP_DMA); + if ( info->intermediate_rxbuffer == NULL ) + return -ENOMEM; + /* unused flag buffer to satisfy receive_buf calling interface */ + info->flag_buf = kzalloc(info->max_frame_size, GFP_KERNEL); + if (!info->flag_buf) { + kfree(info->intermediate_rxbuffer); + info->intermediate_rxbuffer = NULL; + return -ENOMEM; + } + return 0; + +} /* end of mgsl_alloc_intermediate_rxbuffer_memory() */ + +/* + * mgsl_free_intermediate_rxbuffer_memory() + * + * + * Arguments: + * + * info pointer to device instance data + * + * Return Value: None + */ +static void mgsl_free_intermediate_rxbuffer_memory(struct mgsl_struct *info) +{ + kfree(info->intermediate_rxbuffer); + info->intermediate_rxbuffer = NULL; + kfree(info->flag_buf); + info->flag_buf = NULL; + +} /* end of mgsl_free_intermediate_rxbuffer_memory() */ + +/* + * mgsl_alloc_intermediate_txbuffer_memory() + * + * Allocate intermdiate transmit buffer(s) large enough to hold max_frame_size. + * This buffer is used to load transmit frames into the adapter's dma transfer + * buffers when there is sufficient space. + * + * Arguments: + * + * info pointer to device instance data + * + * Return Value: 0 if success, otherwise -ENOMEM + */ +static int mgsl_alloc_intermediate_txbuffer_memory(struct mgsl_struct *info) +{ + int i; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk("%s %s(%d) allocating %d tx holding buffers\n", + info->device_name, __FILE__,__LINE__,info->num_tx_holding_buffers); + + memset(info->tx_holding_buffers,0,sizeof(info->tx_holding_buffers)); + + for ( i=0; inum_tx_holding_buffers; ++i) { + info->tx_holding_buffers[i].buffer = + kmalloc(info->max_frame_size, GFP_KERNEL); + if (info->tx_holding_buffers[i].buffer == NULL) { + for (--i; i >= 0; i--) { + kfree(info->tx_holding_buffers[i].buffer); + info->tx_holding_buffers[i].buffer = NULL; + } + return -ENOMEM; + } + } + + return 0; + +} /* end of mgsl_alloc_intermediate_txbuffer_memory() */ + +/* + * mgsl_free_intermediate_txbuffer_memory() + * + * + * Arguments: + * + * info pointer to device instance data + * + * Return Value: None + */ +static void mgsl_free_intermediate_txbuffer_memory(struct mgsl_struct *info) +{ + int i; + + for ( i=0; inum_tx_holding_buffers; ++i ) { + kfree(info->tx_holding_buffers[i].buffer); + info->tx_holding_buffers[i].buffer = NULL; + } + + info->get_tx_holding_index = 0; + info->put_tx_holding_index = 0; + info->tx_holding_count = 0; + +} /* end of mgsl_free_intermediate_txbuffer_memory() */ + + +/* + * load_next_tx_holding_buffer() + * + * attempts to load the next buffered tx request into the + * tx dma buffers + * + * Arguments: + * + * info pointer to device instance data + * + * Return Value: true if next buffered tx request loaded + * into adapter's tx dma buffer, + * false otherwise + */ +static bool load_next_tx_holding_buffer(struct mgsl_struct *info) +{ + bool ret = false; + + if ( info->tx_holding_count ) { + /* determine if we have enough tx dma buffers + * to accommodate the next tx frame + */ + struct tx_holding_buffer *ptx = + &info->tx_holding_buffers[info->get_tx_holding_index]; + int num_free = num_free_tx_dma_buffers(info); + int num_needed = ptx->buffer_size / DMABUFFERSIZE; + if ( ptx->buffer_size % DMABUFFERSIZE ) + ++num_needed; + + if (num_needed <= num_free) { + info->xmit_cnt = ptx->buffer_size; + mgsl_load_tx_dma_buffer(info,ptx->buffer,ptx->buffer_size); + + --info->tx_holding_count; + if ( ++info->get_tx_holding_index >= info->num_tx_holding_buffers) + info->get_tx_holding_index=0; + + /* restart transmit timer */ + mod_timer(&info->tx_timer, jiffies + msecs_to_jiffies(5000)); + + ret = true; + } + } + + return ret; +} + +/* + * save_tx_buffer_request() + * + * attempt to store transmit frame request for later transmission + * + * Arguments: + * + * info pointer to device instance data + * Buffer pointer to buffer containing frame to load + * BufferSize size in bytes of frame in Buffer + * + * Return Value: 1 if able to store, 0 otherwise + */ +static int save_tx_buffer_request(struct mgsl_struct *info,const char *Buffer, unsigned int BufferSize) +{ + struct tx_holding_buffer *ptx; + + if ( info->tx_holding_count >= info->num_tx_holding_buffers ) { + return 0; /* all buffers in use */ + } + + ptx = &info->tx_holding_buffers[info->put_tx_holding_index]; + ptx->buffer_size = BufferSize; + memcpy( ptx->buffer, Buffer, BufferSize); + + ++info->tx_holding_count; + if ( ++info->put_tx_holding_index >= info->num_tx_holding_buffers) + info->put_tx_holding_index=0; + + return 1; +} + +static int mgsl_claim_resources(struct mgsl_struct *info) +{ + if (request_region(info->io_base,info->io_addr_size,"synclink") == NULL) { + printk( "%s(%d):I/O address conflict on device %s Addr=%08X\n", + __FILE__,__LINE__,info->device_name, info->io_base); + return -ENODEV; + } + info->io_addr_requested = true; + + if ( request_irq(info->irq_level,mgsl_interrupt,info->irq_flags, + info->device_name, info ) < 0 ) { + printk( "%s(%d):Can't request interrupt on device %s IRQ=%d\n", + __FILE__,__LINE__,info->device_name, info->irq_level ); + goto errout; + } + info->irq_requested = true; + + if (request_mem_region(info->phys_memory_base,0x40000,"synclink") == NULL) { + printk( "%s(%d):mem addr conflict device %s Addr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_memory_base); + goto errout; + } + info->shared_mem_requested = true; + if (request_mem_region(info->phys_lcr_base + info->lcr_offset,128,"synclink") == NULL) { + printk( "%s(%d):lcr mem addr conflict device %s Addr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_lcr_base + info->lcr_offset); + goto errout; + } + info->lcr_mem_requested = true; + + info->memory_base = ioremap(info->phys_memory_base, 0x40000); + if (!info->memory_base) { + printk( "%s(%d):Can't map shared memory on device %s MemAddr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_memory_base ); + goto errout; + } + + if ( !mgsl_memory_test(info) ) { + printk( "%s(%d):Failed shared memory test %s MemAddr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_memory_base ); + goto errout; + } + + info->lcr_base = ioremap(info->phys_lcr_base, PAGE_SIZE); + if (!info->lcr_base) { + printk( "%s(%d):Can't map LCR memory on device %s MemAddr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_lcr_base ); + goto errout; + } + info->lcr_base += info->lcr_offset; + + if ( mgsl_allocate_dma_buffers(info) < 0 ) { + printk( "%s(%d):Can't allocate DMA buffers on device %s DMA=%d\n", + __FILE__,__LINE__,info->device_name, info->dma_level ); + goto errout; + } + + return 0; +errout: + mgsl_release_resources(info); + return -ENODEV; + +} /* end of mgsl_claim_resources() */ + +static void mgsl_release_resources(struct mgsl_struct *info) +{ + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):mgsl_release_resources(%s) entry\n", + __FILE__,__LINE__,info->device_name ); + + if ( info->irq_requested ) { + free_irq(info->irq_level, info); + info->irq_requested = false; + } + if ( info->dma_requested ) { + disable_dma(info->dma_level); + free_dma(info->dma_level); + info->dma_requested = false; + } + mgsl_free_dma_buffers(info); + mgsl_free_intermediate_rxbuffer_memory(info); + mgsl_free_intermediate_txbuffer_memory(info); + + if ( info->io_addr_requested ) { + release_region(info->io_base,info->io_addr_size); + info->io_addr_requested = false; + } + if ( info->shared_mem_requested ) { + release_mem_region(info->phys_memory_base,0x40000); + info->shared_mem_requested = false; + } + if ( info->lcr_mem_requested ) { + release_mem_region(info->phys_lcr_base + info->lcr_offset,128); + info->lcr_mem_requested = false; + } + if (info->memory_base){ + iounmap(info->memory_base); + info->memory_base = NULL; + } + if (info->lcr_base){ + iounmap(info->lcr_base - info->lcr_offset); + info->lcr_base = NULL; + } + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):mgsl_release_resources(%s) exit\n", + __FILE__,__LINE__,info->device_name ); + +} /* end of mgsl_release_resources() */ + +/* mgsl_add_device() + * + * Add the specified device instance data structure to the + * global linked list of devices and increment the device count. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void mgsl_add_device( struct mgsl_struct *info ) +{ + info->next_device = NULL; + info->line = mgsl_device_count; + sprintf(info->device_name,"ttySL%d",info->line); + + if (info->line < MAX_TOTAL_DEVICES) { + if (maxframe[info->line]) + info->max_frame_size = maxframe[info->line]; + + if (txdmabufs[info->line]) { + info->num_tx_dma_buffers = txdmabufs[info->line]; + if (info->num_tx_dma_buffers < 1) + info->num_tx_dma_buffers = 1; + } + + if (txholdbufs[info->line]) { + info->num_tx_holding_buffers = txholdbufs[info->line]; + if (info->num_tx_holding_buffers < 1) + info->num_tx_holding_buffers = 1; + else if (info->num_tx_holding_buffers > MAX_TX_HOLDING_BUFFERS) + info->num_tx_holding_buffers = MAX_TX_HOLDING_BUFFERS; + } + } + + mgsl_device_count++; + + if ( !mgsl_device_list ) + mgsl_device_list = info; + else { + struct mgsl_struct *current_dev = mgsl_device_list; + while( current_dev->next_device ) + current_dev = current_dev->next_device; + current_dev->next_device = info; + } + + if ( info->max_frame_size < 4096 ) + info->max_frame_size = 4096; + else if ( info->max_frame_size > 65535 ) + info->max_frame_size = 65535; + + printk( "SyncLink PCI v%d %s: IO=%04X IRQ=%d Mem=%08X,%08X MaxFrameSize=%u\n", + info->hw_version + 1, info->device_name, info->io_base, info->irq_level, + info->phys_memory_base, info->phys_lcr_base, + info->max_frame_size ); + +#if SYNCLINK_GENERIC_HDLC + hdlcdev_init(info); +#endif + +} /* end of mgsl_add_device() */ + +static const struct tty_port_operations mgsl_port_ops = { + .carrier_raised = carrier_raised, + .dtr_rts = dtr_rts, +}; + + +/* mgsl_allocate_device() + * + * Allocate and initialize a device instance structure + * + * Arguments: none + * Return Value: pointer to mgsl_struct if success, otherwise NULL + */ +static struct mgsl_struct* mgsl_allocate_device(void) +{ + struct mgsl_struct *info; + + info = kzalloc(sizeof(struct mgsl_struct), + GFP_KERNEL); + + if (!info) { + printk("Error can't allocate device instance data\n"); + } else { + tty_port_init(&info->port); + info->port.ops = &mgsl_port_ops; + info->magic = MGSL_MAGIC; + INIT_WORK(&info->task, mgsl_bh_handler); + info->max_frame_size = 4096; + info->port.close_delay = 5*HZ/10; + info->port.closing_wait = 30*HZ; + init_waitqueue_head(&info->status_event_wait_q); + init_waitqueue_head(&info->event_wait_q); + spin_lock_init(&info->irq_spinlock); + spin_lock_init(&info->netlock); + memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS)); + info->idle_mode = HDLC_TXIDLE_FLAGS; + info->num_tx_dma_buffers = 1; + info->num_tx_holding_buffers = 0; + } + + return info; + +} /* end of mgsl_allocate_device()*/ + +static const struct tty_operations mgsl_ops = { + .install = mgsl_install, + .open = mgsl_open, + .close = mgsl_close, + .write = mgsl_write, + .put_char = mgsl_put_char, + .flush_chars = mgsl_flush_chars, + .write_room = mgsl_write_room, + .chars_in_buffer = mgsl_chars_in_buffer, + .flush_buffer = mgsl_flush_buffer, + .ioctl = mgsl_ioctl, + .throttle = mgsl_throttle, + .unthrottle = mgsl_unthrottle, + .send_xchar = mgsl_send_xchar, + .break_ctl = mgsl_break, + .wait_until_sent = mgsl_wait_until_sent, + .set_termios = mgsl_set_termios, + .stop = mgsl_stop, + .start = mgsl_start, + .hangup = mgsl_hangup, + .tiocmget = tiocmget, + .tiocmset = tiocmset, + .get_icount = msgl_get_icount, + .proc_show = mgsl_proc_show, +}; + +/* + * perform tty device initialization + */ +static int mgsl_init_tty(void) +{ + int rc; + + serial_driver = alloc_tty_driver(128); + if (!serial_driver) + return -ENOMEM; + + serial_driver->driver_name = "synclink"; + serial_driver->name = "ttySL"; + serial_driver->major = ttymajor; + serial_driver->minor_start = 64; + serial_driver->type = TTY_DRIVER_TYPE_SERIAL; + serial_driver->subtype = SERIAL_TYPE_NORMAL; + serial_driver->init_termios = tty_std_termios; + serial_driver->init_termios.c_cflag = + B9600 | CS8 | CREAD | HUPCL | CLOCAL; + serial_driver->init_termios.c_ispeed = 9600; + serial_driver->init_termios.c_ospeed = 9600; + serial_driver->flags = TTY_DRIVER_REAL_RAW; + tty_set_operations(serial_driver, &mgsl_ops); + if ((rc = tty_register_driver(serial_driver)) < 0) { + printk("%s(%d):Couldn't register serial driver\n", + __FILE__,__LINE__); + put_tty_driver(serial_driver); + serial_driver = NULL; + return rc; + } + + printk("%s %s, tty major#%d\n", + driver_name, driver_version, + serial_driver->major); + return 0; +} + +static void synclink_cleanup(void) +{ + int rc; + struct mgsl_struct *info; + struct mgsl_struct *tmp; + + printk("Unloading %s: %s\n", driver_name, driver_version); + + if (serial_driver) { + rc = tty_unregister_driver(serial_driver); + if (rc) + printk("%s(%d) failed to unregister tty driver err=%d\n", + __FILE__,__LINE__,rc); + put_tty_driver(serial_driver); + } + + info = mgsl_device_list; + while(info) { +#if SYNCLINK_GENERIC_HDLC + hdlcdev_exit(info); +#endif + mgsl_release_resources(info); + tmp = info; + info = info->next_device; + tty_port_destroy(&tmp->port); + kfree(tmp); + } + + if (pci_registered) + pci_unregister_driver(&synclink_pci_driver); +} + +static int __init synclink_init(void) +{ + int rc; + + if (break_on_load) { + mgsl_get_text_ptr(); + BREAKPOINT(); + } + + printk("%s %s\n", driver_name, driver_version); + + if ((rc = pci_register_driver(&synclink_pci_driver)) < 0) + printk("%s:failed to register PCI driver, error=%d\n",__FILE__,rc); + else + pci_registered = true; + + if ((rc = mgsl_init_tty()) < 0) + goto error; + + return 0; + +error: + synclink_cleanup(); + return rc; +} + +static void __exit synclink_exit(void) +{ + synclink_cleanup(); +} + +module_init(synclink_init); +module_exit(synclink_exit); + +/* + * usc_RTCmd() + * + * Issue a USC Receive/Transmit command to the + * Channel Command/Address Register (CCAR). + * + * Notes: + * + * The command is encoded in the most significant 5 bits <15..11> + * of the CCAR value. Bits <10..7> of the CCAR must be preserved + * and Bits <6..0> must be written as zeros. + * + * Arguments: + * + * info pointer to device information structure + * Cmd command mask (use symbolic macros) + * + * Return Value: + * + * None + */ +static void usc_RTCmd( struct mgsl_struct *info, u16 Cmd ) +{ + /* output command to CCAR in bits <15..11> */ + /* preserve bits <10..7>, bits <6..0> must be zero */ + + outw( Cmd + info->loopback_bits, info->io_base + CCAR ); + + /* Read to flush write to CCAR */ + inw( info->io_base + CCAR ); + +} /* end of usc_RTCmd() */ + +/* + * usc_DmaCmd() + * + * Issue a DMA command to the DMA Command/Address Register (DCAR). + * + * Arguments: + * + * info pointer to device information structure + * Cmd DMA command mask (usc_DmaCmd_XX Macros) + * + * Return Value: + * + * None + */ +static void usc_DmaCmd( struct mgsl_struct *info, u16 Cmd ) +{ + /* write command mask to DCAR */ + outw( Cmd + info->mbre_bit, info->io_base ); + + /* Read to flush write to DCAR */ + inw( info->io_base ); + +} /* end of usc_DmaCmd() */ + +/* + * usc_OutDmaReg() + * + * Write a 16-bit value to a USC DMA register + * + * Arguments: + * + * info pointer to device info structure + * RegAddr register address (number) for write + * RegValue 16-bit value to write to register + * + * Return Value: + * + * None + * + */ +static void usc_OutDmaReg( struct mgsl_struct *info, u16 RegAddr, u16 RegValue ) +{ + /* Note: The DCAR is located at the adapter base address */ + /* Note: must preserve state of BIT8 in DCAR */ + + outw( RegAddr + info->mbre_bit, info->io_base ); + outw( RegValue, info->io_base ); + + /* Read to flush write to DCAR */ + inw( info->io_base ); + +} /* end of usc_OutDmaReg() */ + +/* + * usc_InDmaReg() + * + * Read a 16-bit value from a DMA register + * + * Arguments: + * + * info pointer to device info structure + * RegAddr register address (number) to read from + * + * Return Value: + * + * The 16-bit value read from register + * + */ +static u16 usc_InDmaReg( struct mgsl_struct *info, u16 RegAddr ) +{ + /* Note: The DCAR is located at the adapter base address */ + /* Note: must preserve state of BIT8 in DCAR */ + + outw( RegAddr + info->mbre_bit, info->io_base ); + return inw( info->io_base ); + +} /* end of usc_InDmaReg() */ + +/* + * + * usc_OutReg() + * + * Write a 16-bit value to a USC serial channel register + * + * Arguments: + * + * info pointer to device info structure + * RegAddr register address (number) to write to + * RegValue 16-bit value to write to register + * + * Return Value: + * + * None + * + */ +static void usc_OutReg( struct mgsl_struct *info, u16 RegAddr, u16 RegValue ) +{ + outw( RegAddr + info->loopback_bits, info->io_base + CCAR ); + outw( RegValue, info->io_base + CCAR ); + + /* Read to flush write to CCAR */ + inw( info->io_base + CCAR ); + +} /* end of usc_OutReg() */ + +/* + * usc_InReg() + * + * Reads a 16-bit value from a USC serial channel register + * + * Arguments: + * + * info pointer to device extension + * RegAddr register address (number) to read from + * + * Return Value: + * + * 16-bit value read from register + */ +static u16 usc_InReg( struct mgsl_struct *info, u16 RegAddr ) +{ + outw( RegAddr + info->loopback_bits, info->io_base + CCAR ); + return inw( info->io_base + CCAR ); + +} /* end of usc_InReg() */ + +/* usc_set_sdlc_mode() + * + * Set up the adapter for SDLC DMA communications. + * + * Arguments: info pointer to device instance data + * Return Value: NONE + */ +static void usc_set_sdlc_mode( struct mgsl_struct *info ) +{ + u16 RegValue; + bool PreSL1660; + + /* + * determine if the IUSC on the adapter is pre-SL1660. If + * not, take advantage of the UnderWait feature of more + * modern chips. If an underrun occurs and this bit is set, + * the transmitter will idle the programmed idle pattern + * until the driver has time to service the underrun. Otherwise, + * the dma controller may get the cycles previously requested + * and begin transmitting queued tx data. + */ + usc_OutReg(info,TMCR,0x1f); + RegValue=usc_InReg(info,TMDR); + PreSL1660 = (RegValue == IUSC_PRE_SL1660); + + if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE ) + { + /* + ** Channel Mode Register (CMR) + ** + ** <15..14> 10 Tx Sub Modes, Send Flag on Underrun + ** <13> 0 0 = Transmit Disabled (initially) + ** <12> 0 1 = Consecutive Idles share common 0 + ** <11..8> 1110 Transmitter Mode = HDLC/SDLC Loop + ** <7..4> 0000 Rx Sub Modes, addr/ctrl field handling + ** <3..0> 0110 Receiver Mode = HDLC/SDLC + ** + ** 1000 1110 0000 0110 = 0x8e06 + */ + RegValue = 0x8e06; + + /*-------------------------------------------------- + * ignore user options for UnderRun Actions and + * preambles + *--------------------------------------------------*/ + } + else + { + /* Channel mode Register (CMR) + * + * <15..14> 00 Tx Sub modes, Underrun Action + * <13> 0 1 = Send Preamble before opening flag + * <12> 0 1 = Consecutive Idles share common 0 + * <11..8> 0110 Transmitter mode = HDLC/SDLC + * <7..4> 0000 Rx Sub modes, addr/ctrl field handling + * <3..0> 0110 Receiver mode = HDLC/SDLC + * + * 0000 0110 0000 0110 = 0x0606 + */ + if (info->params.mode == MGSL_MODE_RAW) { + RegValue = 0x0001; /* Set Receive mode = external sync */ + + usc_OutReg( info, IOCR, /* Set IOCR DCD is RxSync Detect Input */ + (unsigned short)((usc_InReg(info, IOCR) & ~(BIT13|BIT12)) | BIT12)); + + /* + * TxSubMode: + * CMR <15> 0 Don't send CRC on Tx Underrun + * CMR <14> x undefined + * CMR <13> 0 Send preamble before openning sync + * CMR <12> 0 Send 8-bit syncs, 1=send Syncs per TxLength + * + * TxMode: + * CMR <11-8) 0100 MonoSync + * + * 0x00 0100 xxxx xxxx 04xx + */ + RegValue |= 0x0400; + } + else { + + RegValue = 0x0606; + + if ( info->params.flags & HDLC_FLAG_UNDERRUN_ABORT15 ) + RegValue |= BIT14; + else if ( info->params.flags & HDLC_FLAG_UNDERRUN_FLAG ) + RegValue |= BIT15; + else if ( info->params.flags & HDLC_FLAG_UNDERRUN_CRC ) + RegValue |= BIT15 | BIT14; + } + + if ( info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE ) + RegValue |= BIT13; + } + + if ( info->params.mode == MGSL_MODE_HDLC && + (info->params.flags & HDLC_FLAG_SHARE_ZERO) ) + RegValue |= BIT12; + + if ( info->params.addr_filter != 0xff ) + { + /* set up receive address filtering */ + usc_OutReg( info, RSR, info->params.addr_filter ); + RegValue |= BIT4; + } + + usc_OutReg( info, CMR, RegValue ); + info->cmr_value = RegValue; + + /* Receiver mode Register (RMR) + * + * <15..13> 000 encoding + * <12..11> 00 FCS = 16bit CRC CCITT (x15 + x12 + x5 + 1) + * <10> 1 1 = Set CRC to all 1s (use for SDLC/HDLC) + * <9> 0 1 = Include Receive chars in CRC + * <8> 1 1 = Use Abort/PE bit as abort indicator + * <7..6> 00 Even parity + * <5> 0 parity disabled + * <4..2> 000 Receive Char Length = 8 bits + * <1..0> 00 Disable Receiver + * + * 0000 0101 0000 0000 = 0x0500 + */ + + RegValue = 0x0500; + + switch ( info->params.encoding ) { + case HDLC_ENCODING_NRZB: RegValue |= BIT13; break; + case HDLC_ENCODING_NRZI_MARK: RegValue |= BIT14; break; + case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT14 | BIT13; break; + case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT15; break; + case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT15 | BIT13; break; + case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT15 | BIT14; break; + case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT15 | BIT14 | BIT13; break; + } + + if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_16_CCITT ) + RegValue |= BIT9; + else if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_32_CCITT ) + RegValue |= ( BIT12 | BIT10 | BIT9 ); + + usc_OutReg( info, RMR, RegValue ); + + /* Set the Receive count Limit Register (RCLR) to 0xffff. */ + /* When an opening flag of an SDLC frame is recognized the */ + /* Receive Character count (RCC) is loaded with the value in */ + /* RCLR. The RCC is decremented for each received byte. The */ + /* value of RCC is stored after the closing flag of the frame */ + /* allowing the frame size to be computed. */ + + usc_OutReg( info, RCLR, RCLRVALUE ); + + usc_RCmd( info, RCmd_SelectRicrdma_level ); + + /* Receive Interrupt Control Register (RICR) + * + * <15..8> ? RxFIFO DMA Request Level + * <7> 0 Exited Hunt IA (Interrupt Arm) + * <6> 0 Idle Received IA + * <5> 0 Break/Abort IA + * <4> 0 Rx Bound IA + * <3> 1 Queued status reflects oldest 2 bytes in FIFO + * <2> 0 Abort/PE IA + * <1> 1 Rx Overrun IA + * <0> 0 Select TC0 value for readback + * + * 0000 0000 0000 1000 = 0x000a + */ + + /* Carry over the Exit Hunt and Idle Received bits */ + /* in case they have been armed by usc_ArmEvents. */ + + RegValue = usc_InReg( info, RICR ) & 0xc0; + + usc_OutReg( info, RICR, (u16)(0x030a | RegValue) ); + + /* Unlatch all Rx status bits and clear Rx status IRQ Pending */ + + usc_UnlatchRxstatusBits( info, RXSTATUS_ALL ); + usc_ClearIrqPendingBits( info, RECEIVE_STATUS ); + + /* Transmit mode Register (TMR) + * + * <15..13> 000 encoding + * <12..11> 00 FCS = 16bit CRC CCITT (x15 + x12 + x5 + 1) + * <10> 1 1 = Start CRC as all 1s (use for SDLC/HDLC) + * <9> 0 1 = Tx CRC Enabled + * <8> 0 1 = Append CRC to end of transmit frame + * <7..6> 00 Transmit parity Even + * <5> 0 Transmit parity Disabled + * <4..2> 000 Tx Char Length = 8 bits + * <1..0> 00 Disable Transmitter + * + * 0000 0100 0000 0000 = 0x0400 + */ + + RegValue = 0x0400; + + switch ( info->params.encoding ) { + case HDLC_ENCODING_NRZB: RegValue |= BIT13; break; + case HDLC_ENCODING_NRZI_MARK: RegValue |= BIT14; break; + case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT14 | BIT13; break; + case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT15; break; + case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT15 | BIT13; break; + case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT15 | BIT14; break; + case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT15 | BIT14 | BIT13; break; + } + + if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_16_CCITT ) + RegValue |= BIT9 | BIT8; + else if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_32_CCITT ) + RegValue |= ( BIT12 | BIT10 | BIT9 | BIT8); + + usc_OutReg( info, TMR, RegValue ); + + usc_set_txidle( info ); + + + usc_TCmd( info, TCmd_SelectTicrdma_level ); + + /* Transmit Interrupt Control Register (TICR) + * + * <15..8> ? Transmit FIFO DMA Level + * <7> 0 Present IA (Interrupt Arm) + * <6> 0 Idle Sent IA + * <5> 1 Abort Sent IA + * <4> 1 EOF/EOM Sent IA + * <3> 0 CRC Sent IA + * <2> 1 1 = Wait for SW Trigger to Start Frame + * <1> 1 Tx Underrun IA + * <0> 0 TC0 constant on read back + * + * 0000 0000 0011 0110 = 0x0036 + */ + + usc_OutReg( info, TICR, 0x0736 ); + + usc_UnlatchTxstatusBits( info, TXSTATUS_ALL ); + usc_ClearIrqPendingBits( info, TRANSMIT_STATUS ); + + /* + ** Transmit Command/Status Register (TCSR) + ** + ** <15..12> 0000 TCmd + ** <11> 0/1 UnderWait + ** <10..08> 000 TxIdle + ** <7> x PreSent + ** <6> x IdleSent + ** <5> x AbortSent + ** <4> x EOF/EOM Sent + ** <3> x CRC Sent + ** <2> x All Sent + ** <1> x TxUnder + ** <0> x TxEmpty + ** + ** 0000 0000 0000 0000 = 0x0000 + */ + info->tcsr_value = 0; + + if ( !PreSL1660 ) + info->tcsr_value |= TCSR_UNDERWAIT; + + usc_OutReg( info, TCSR, info->tcsr_value ); + + /* Clock mode Control Register (CMCR) + * + * <15..14> 00 counter 1 Source = Disabled + * <13..12> 00 counter 0 Source = Disabled + * <11..10> 11 BRG1 Input is TxC Pin + * <9..8> 11 BRG0 Input is TxC Pin + * <7..6> 01 DPLL Input is BRG1 Output + * <5..3> XXX TxCLK comes from Port 0 + * <2..0> XXX RxCLK comes from Port 1 + * + * 0000 1111 0111 0111 = 0x0f77 + */ + + RegValue = 0x0f40; + + if ( info->params.flags & HDLC_FLAG_RXC_DPLL ) + RegValue |= 0x0003; /* RxCLK from DPLL */ + else if ( info->params.flags & HDLC_FLAG_RXC_BRG ) + RegValue |= 0x0004; /* RxCLK from BRG0 */ + else if ( info->params.flags & HDLC_FLAG_RXC_TXCPIN) + RegValue |= 0x0006; /* RxCLK from TXC Input */ + else + RegValue |= 0x0007; /* RxCLK from Port1 */ + + if ( info->params.flags & HDLC_FLAG_TXC_DPLL ) + RegValue |= 0x0018; /* TxCLK from DPLL */ + else if ( info->params.flags & HDLC_FLAG_TXC_BRG ) + RegValue |= 0x0020; /* TxCLK from BRG0 */ + else if ( info->params.flags & HDLC_FLAG_TXC_RXCPIN) + RegValue |= 0x0038; /* RxCLK from TXC Input */ + else + RegValue |= 0x0030; /* TxCLK from Port0 */ + + usc_OutReg( info, CMCR, RegValue ); + + + /* Hardware Configuration Register (HCR) + * + * <15..14> 00 CTR0 Divisor:00=32,01=16,10=8,11=4 + * <13> 0 CTR1DSel:0=CTR0Div determines CTR0Div + * <12> 0 CVOK:0=report code violation in biphase + * <11..10> 00 DPLL Divisor:00=32,01=16,10=8,11=4 + * <9..8> XX DPLL mode:00=disable,01=NRZ,10=Biphase,11=Biphase Level + * <7..6> 00 reserved + * <5> 0 BRG1 mode:0=continuous,1=single cycle + * <4> X BRG1 Enable + * <3..2> 00 reserved + * <1> 0 BRG0 mode:0=continuous,1=single cycle + * <0> 0 BRG0 Enable + */ + + RegValue = 0x0000; + + if ( info->params.flags & (HDLC_FLAG_RXC_DPLL | HDLC_FLAG_TXC_DPLL) ) { + u32 XtalSpeed; + u32 DpllDivisor; + u16 Tc; + + /* DPLL is enabled. Use BRG1 to provide continuous reference clock */ + /* for DPLL. DPLL mode in HCR is dependent on the encoding used. */ + + XtalSpeed = 11059200; + + if ( info->params.flags & HDLC_FLAG_DPLL_DIV16 ) { + DpllDivisor = 16; + RegValue |= BIT10; + } + else if ( info->params.flags & HDLC_FLAG_DPLL_DIV8 ) { + DpllDivisor = 8; + RegValue |= BIT11; + } + else + DpllDivisor = 32; + + /* Tc = (Xtal/Speed) - 1 */ + /* If twice the remainder of (Xtal/Speed) is greater than Speed */ + /* then rounding up gives a more precise time constant. Instead */ + /* of rounding up and then subtracting 1 we just don't subtract */ + /* the one in this case. */ + + /*-------------------------------------------------- + * ejz: for DPLL mode, application should use the + * same clock speed as the partner system, even + * though clocking is derived from the input RxData. + * In case the user uses a 0 for the clock speed, + * default to 0xffffffff and don't try to divide by + * zero + *--------------------------------------------------*/ + if ( info->params.clock_speed ) + { + Tc = (u16)((XtalSpeed/DpllDivisor)/info->params.clock_speed); + if ( !((((XtalSpeed/DpllDivisor) % info->params.clock_speed) * 2) + / info->params.clock_speed) ) + Tc--; + } + else + Tc = -1; + + + /* Write 16-bit Time Constant for BRG1 */ + usc_OutReg( info, TC1R, Tc ); + + RegValue |= BIT4; /* enable BRG1 */ + + switch ( info->params.encoding ) { + case HDLC_ENCODING_NRZ: + case HDLC_ENCODING_NRZB: + case HDLC_ENCODING_NRZI_MARK: + case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT8; break; + case HDLC_ENCODING_BIPHASE_MARK: + case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT9; break; + case HDLC_ENCODING_BIPHASE_LEVEL: + case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT9 | BIT8; break; + } + } + + usc_OutReg( info, HCR, RegValue ); + + + /* Channel Control/status Register (CCSR) + * + * <15> X RCC FIFO Overflow status (RO) + * <14> X RCC FIFO Not Empty status (RO) + * <13> 0 1 = Clear RCC FIFO (WO) + * <12> X DPLL Sync (RW) + * <11> X DPLL 2 Missed Clocks status (RO) + * <10> X DPLL 1 Missed Clock status (RO) + * <9..8> 00 DPLL Resync on rising and falling edges (RW) + * <7> X SDLC Loop On status (RO) + * <6> X SDLC Loop Send status (RO) + * <5> 1 Bypass counters for TxClk and RxClk (RW) + * <4..2> 000 Last Char of SDLC frame has 8 bits (RW) + * <1..0> 00 reserved + * + * 0000 0000 0010 0000 = 0x0020 + */ + + usc_OutReg( info, CCSR, 0x1020 ); + + + if ( info->params.flags & HDLC_FLAG_AUTO_CTS ) { + usc_OutReg( info, SICR, + (u16)(usc_InReg(info,SICR) | SICR_CTS_INACTIVE) ); + } + + + /* enable Master Interrupt Enable bit (MIE) */ + usc_EnableMasterIrqBit( info ); + + usc_ClearIrqPendingBits( info, RECEIVE_STATUS | RECEIVE_DATA | + TRANSMIT_STATUS | TRANSMIT_DATA | MISC); + + /* arm RCC underflow interrupt */ + usc_OutReg(info, SICR, (u16)(usc_InReg(info,SICR) | BIT3)); + usc_EnableInterrupts(info, MISC); + + info->mbre_bit = 0; + outw( 0, info->io_base ); /* clear Master Bus Enable (DCAR) */ + usc_DmaCmd( info, DmaCmd_ResetAllChannels ); /* disable both DMA channels */ + info->mbre_bit = BIT8; + outw( BIT8, info->io_base ); /* set Master Bus Enable (DCAR) */ + + /* DMA Control Register (DCR) + * + * <15..14> 10 Priority mode = Alternating Tx/Rx + * 01 Rx has priority + * 00 Tx has priority + * + * <13> 1 Enable Priority Preempt per DCR<15..14> + * (WARNING DCR<11..10> must be 00 when this is 1) + * 0 Choose activate channel per DCR<11..10> + * + * <12> 0 Little Endian for Array/List + * <11..10> 00 Both Channels can use each bus grant + * <9..6> 0000 reserved + * <5> 0 7 CLK - Minimum Bus Re-request Interval + * <4> 0 1 = drive D/C and S/D pins + * <3> 1 1 = Add one wait state to all DMA cycles. + * <2> 0 1 = Strobe /UAS on every transfer. + * <1..0> 11 Addr incrementing only affects LS24 bits + * + * 0110 0000 0000 1011 = 0x600b + */ + + /* PCI adapter does not need DMA wait state */ + usc_OutDmaReg( info, DCR, 0xa00b ); + + /* Receive DMA mode Register (RDMR) + * + * <15..14> 11 DMA mode = Linked List Buffer mode + * <13> 1 RSBinA/L = store Rx status Block in Arrary/List entry + * <12> 1 Clear count of List Entry after fetching + * <11..10> 00 Address mode = Increment + * <9> 1 Terminate Buffer on RxBound + * <8> 0 Bus Width = 16bits + * <7..0> ? status Bits (write as 0s) + * + * 1111 0010 0000 0000 = 0xf200 + */ + + usc_OutDmaReg( info, RDMR, 0xf200 ); + + + /* Transmit DMA mode Register (TDMR) + * + * <15..14> 11 DMA mode = Linked List Buffer mode + * <13> 1 TCBinA/L = fetch Tx Control Block from List entry + * <12> 1 Clear count of List Entry after fetching + * <11..10> 00 Address mode = Increment + * <9> 1 Terminate Buffer on end of frame + * <8> 0 Bus Width = 16bits + * <7..0> ? status Bits (Read Only so write as 0) + * + * 1111 0010 0000 0000 = 0xf200 + */ + + usc_OutDmaReg( info, TDMR, 0xf200 ); + + + /* DMA Interrupt Control Register (DICR) + * + * <15> 1 DMA Interrupt Enable + * <14> 0 1 = Disable IEO from USC + * <13> 0 1 = Don't provide vector during IntAck + * <12> 1 1 = Include status in Vector + * <10..2> 0 reserved, Must be 0s + * <1> 0 1 = Rx DMA Interrupt Enabled + * <0> 0 1 = Tx DMA Interrupt Enabled + * + * 1001 0000 0000 0000 = 0x9000 + */ + + usc_OutDmaReg( info, DICR, 0x9000 ); + + usc_InDmaReg( info, RDMR ); /* clear pending receive DMA IRQ bits */ + usc_InDmaReg( info, TDMR ); /* clear pending transmit DMA IRQ bits */ + usc_OutDmaReg( info, CDIR, 0x0303 ); /* clear IUS and Pending for Tx and Rx */ + + /* Channel Control Register (CCR) + * + * <15..14> 10 Use 32-bit Tx Control Blocks (TCBs) + * <13> 0 Trigger Tx on SW Command Disabled + * <12> 0 Flag Preamble Disabled + * <11..10> 00 Preamble Length + * <9..8> 00 Preamble Pattern + * <7..6> 10 Use 32-bit Rx status Blocks (RSBs) + * <5> 0 Trigger Rx on SW Command Disabled + * <4..0> 0 reserved + * + * 1000 0000 1000 0000 = 0x8080 + */ + + RegValue = 0x8080; + + switch ( info->params.preamble_length ) { + case HDLC_PREAMBLE_LENGTH_16BITS: RegValue |= BIT10; break; + case HDLC_PREAMBLE_LENGTH_32BITS: RegValue |= BIT11; break; + case HDLC_PREAMBLE_LENGTH_64BITS: RegValue |= BIT11 | BIT10; break; + } + + switch ( info->params.preamble ) { + case HDLC_PREAMBLE_PATTERN_FLAGS: RegValue |= BIT8 | BIT12; break; + case HDLC_PREAMBLE_PATTERN_ONES: RegValue |= BIT8; break; + case HDLC_PREAMBLE_PATTERN_10: RegValue |= BIT9; break; + case HDLC_PREAMBLE_PATTERN_01: RegValue |= BIT9 | BIT8; break; + } + + usc_OutReg( info, CCR, RegValue ); + + + /* + * Burst/Dwell Control Register + * + * <15..8> 0x20 Maximum number of transfers per bus grant + * <7..0> 0x00 Maximum number of clock cycles per bus grant + */ + + /* don't limit bus occupancy on PCI adapter */ + usc_OutDmaReg( info, BDCR, 0x0000 ); + + usc_stop_transmitter(info); + usc_stop_receiver(info); + +} /* end of usc_set_sdlc_mode() */ + +/* usc_enable_loopback() + * + * Set the 16C32 for internal loopback mode. + * The TxCLK and RxCLK signals are generated from the BRG0 and + * the TxD is looped back to the RxD internally. + * + * Arguments: info pointer to device instance data + * enable 1 = enable loopback, 0 = disable + * Return Value: None + */ +static void usc_enable_loopback(struct mgsl_struct *info, int enable) +{ + if (enable) { + /* blank external TXD output */ + usc_OutReg(info,IOCR,usc_InReg(info,IOCR) | (BIT7 | BIT6)); + + /* Clock mode Control Register (CMCR) + * + * <15..14> 00 counter 1 Disabled + * <13..12> 00 counter 0 Disabled + * <11..10> 11 BRG1 Input is TxC Pin + * <9..8> 11 BRG0 Input is TxC Pin + * <7..6> 01 DPLL Input is BRG1 Output + * <5..3> 100 TxCLK comes from BRG0 + * <2..0> 100 RxCLK comes from BRG0 + * + * 0000 1111 0110 0100 = 0x0f64 + */ + + usc_OutReg( info, CMCR, 0x0f64 ); + + /* Write 16-bit Time Constant for BRG0 */ + /* use clock speed if available, otherwise use 8 for diagnostics */ + if (info->params.clock_speed) { + usc_OutReg(info, TC0R, (u16)((11059200/info->params.clock_speed)-1)); + } else + usc_OutReg(info, TC0R, (u16)8); + + /* Hardware Configuration Register (HCR) Clear Bit 1, BRG0 + mode = Continuous Set Bit 0 to enable BRG0. */ + usc_OutReg( info, HCR, (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) ); + + /* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */ + usc_OutReg(info, IOCR, (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004)); + + /* set Internal Data loopback mode */ + info->loopback_bits = 0x300; + outw( 0x0300, info->io_base + CCAR ); + } else { + /* enable external TXD output */ + usc_OutReg(info,IOCR,usc_InReg(info,IOCR) & ~(BIT7 | BIT6)); + + /* clear Internal Data loopback mode */ + info->loopback_bits = 0; + outw( 0,info->io_base + CCAR ); + } + +} /* end of usc_enable_loopback() */ + +/* usc_enable_aux_clock() + * + * Enabled the AUX clock output at the specified frequency. + * + * Arguments: + * + * info pointer to device extension + * data_rate data rate of clock in bits per second + * A data rate of 0 disables the AUX clock. + * + * Return Value: None + */ +static void usc_enable_aux_clock( struct mgsl_struct *info, u32 data_rate ) +{ + u32 XtalSpeed; + u16 Tc; + + if ( data_rate ) { + XtalSpeed = 11059200; + + + /* Tc = (Xtal/Speed) - 1 */ + /* If twice the remainder of (Xtal/Speed) is greater than Speed */ + /* then rounding up gives a more precise time constant. Instead */ + /* of rounding up and then subtracting 1 we just don't subtract */ + /* the one in this case. */ + + + Tc = (u16)(XtalSpeed/data_rate); + if ( !(((XtalSpeed % data_rate) * 2) / data_rate) ) + Tc--; + + /* Write 16-bit Time Constant for BRG0 */ + usc_OutReg( info, TC0R, Tc ); + + /* + * Hardware Configuration Register (HCR) + * Clear Bit 1, BRG0 mode = Continuous + * Set Bit 0 to enable BRG0. + */ + + usc_OutReg( info, HCR, (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) ); + + /* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */ + usc_OutReg( info, IOCR, (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004) ); + } else { + /* data rate == 0 so turn off BRG0 */ + usc_OutReg( info, HCR, (u16)(usc_InReg( info, HCR ) & ~BIT0) ); + } + +} /* end of usc_enable_aux_clock() */ + +/* + * + * usc_process_rxoverrun_sync() + * + * This function processes a receive overrun by resetting the + * receive DMA buffers and issuing a Purge Rx FIFO command + * to allow the receiver to continue receiving. + * + * Arguments: + * + * info pointer to device extension + * + * Return Value: None + */ +static void usc_process_rxoverrun_sync( struct mgsl_struct *info ) +{ + int start_index; + int end_index; + int frame_start_index; + bool start_of_frame_found = false; + bool end_of_frame_found = false; + bool reprogram_dma = false; + + DMABUFFERENTRY *buffer_list = info->rx_buffer_list; + u32 phys_addr; + + usc_DmaCmd( info, DmaCmd_PauseRxChannel ); + usc_RCmd( info, RCmd_EnterHuntmode ); + usc_RTCmd( info, RTCmd_PurgeRxFifo ); + + /* CurrentRxBuffer points to the 1st buffer of the next */ + /* possibly available receive frame. */ + + frame_start_index = start_index = end_index = info->current_rx_buffer; + + /* Search for an unfinished string of buffers. This means */ + /* that a receive frame started (at least one buffer with */ + /* count set to zero) but there is no terminiting buffer */ + /* (status set to non-zero). */ + + while( !buffer_list[end_index].count ) + { + /* Count field has been reset to zero by 16C32. */ + /* This buffer is currently in use. */ + + if ( !start_of_frame_found ) + { + start_of_frame_found = true; + frame_start_index = end_index; + end_of_frame_found = false; + } + + if ( buffer_list[end_index].status ) + { + /* Status field has been set by 16C32. */ + /* This is the last buffer of a received frame. */ + + /* We want to leave the buffers for this frame intact. */ + /* Move on to next possible frame. */ + + start_of_frame_found = false; + end_of_frame_found = true; + } + + /* advance to next buffer entry in linked list */ + end_index++; + if ( end_index == info->rx_buffer_count ) + end_index = 0; + + if ( start_index == end_index ) + { + /* The entire list has been searched with all Counts == 0 and */ + /* all Status == 0. The receive buffers are */ + /* completely screwed, reset all receive buffers! */ + mgsl_reset_rx_dma_buffers( info ); + frame_start_index = 0; + start_of_frame_found = false; + reprogram_dma = true; + break; + } + } + + if ( start_of_frame_found && !end_of_frame_found ) + { + /* There is an unfinished string of receive DMA buffers */ + /* as a result of the receiver overrun. */ + + /* Reset the buffers for the unfinished frame */ + /* and reprogram the receive DMA controller to start */ + /* at the 1st buffer of unfinished frame. */ + + start_index = frame_start_index; + + do + { + *((unsigned long *)&(info->rx_buffer_list[start_index++].count)) = DMABUFFERSIZE; + + /* Adjust index for wrap around. */ + if ( start_index == info->rx_buffer_count ) + start_index = 0; + + } while( start_index != end_index ); + + reprogram_dma = true; + } + + if ( reprogram_dma ) + { + usc_UnlatchRxstatusBits(info,RXSTATUS_ALL); + usc_ClearIrqPendingBits(info, RECEIVE_DATA|RECEIVE_STATUS); + usc_UnlatchRxstatusBits(info, RECEIVE_DATA|RECEIVE_STATUS); + + usc_EnableReceiver(info,DISABLE_UNCONDITIONAL); + + /* This empties the receive FIFO and loads the RCC with RCLR */ + usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) ); + + /* program 16C32 with physical address of 1st DMA buffer entry */ + phys_addr = info->rx_buffer_list[frame_start_index].phys_entry; + usc_OutDmaReg( info, NRARL, (u16)phys_addr ); + usc_OutDmaReg( info, NRARU, (u16)(phys_addr >> 16) ); + + usc_UnlatchRxstatusBits( info, RXSTATUS_ALL ); + usc_ClearIrqPendingBits( info, RECEIVE_DATA | RECEIVE_STATUS ); + usc_EnableInterrupts( info, RECEIVE_STATUS ); + + /* 1. Arm End of Buffer (EOB) Receive DMA Interrupt (BIT2 of RDIAR) */ + /* 2. Enable Receive DMA Interrupts (BIT1 of DICR) */ + + usc_OutDmaReg( info, RDIAR, BIT3 | BIT2 ); + usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT1) ); + usc_DmaCmd( info, DmaCmd_InitRxChannel ); + if ( info->params.flags & HDLC_FLAG_AUTO_DCD ) + usc_EnableReceiver(info,ENABLE_AUTO_DCD); + else + usc_EnableReceiver(info,ENABLE_UNCONDITIONAL); + } + else + { + /* This empties the receive FIFO and loads the RCC with RCLR */ + usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) ); + usc_RTCmd( info, RTCmd_PurgeRxFifo ); + } + +} /* end of usc_process_rxoverrun_sync() */ + +/* usc_stop_receiver() + * + * Disable USC receiver + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void usc_stop_receiver( struct mgsl_struct *info ) +{ + if (debug_level >= DEBUG_LEVEL_ISR) + printk("%s(%d):usc_stop_receiver(%s)\n", + __FILE__,__LINE__, info->device_name ); + + /* Disable receive DMA channel. */ + /* This also disables receive DMA channel interrupts */ + usc_DmaCmd( info, DmaCmd_ResetRxChannel ); + + usc_UnlatchRxstatusBits( info, RXSTATUS_ALL ); + usc_ClearIrqPendingBits( info, RECEIVE_DATA | RECEIVE_STATUS ); + usc_DisableInterrupts( info, RECEIVE_DATA | RECEIVE_STATUS ); + + usc_EnableReceiver(info,DISABLE_UNCONDITIONAL); + + /* This empties the receive FIFO and loads the RCC with RCLR */ + usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) ); + usc_RTCmd( info, RTCmd_PurgeRxFifo ); + + info->rx_enabled = false; + info->rx_overflow = false; + info->rx_rcc_underrun = false; + +} /* end of stop_receiver() */ + +/* usc_start_receiver() + * + * Enable the USC receiver + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void usc_start_receiver( struct mgsl_struct *info ) +{ + u32 phys_addr; + + if (debug_level >= DEBUG_LEVEL_ISR) + printk("%s(%d):usc_start_receiver(%s)\n", + __FILE__,__LINE__, info->device_name ); + + mgsl_reset_rx_dma_buffers( info ); + usc_stop_receiver( info ); + + usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) ); + usc_RTCmd( info, RTCmd_PurgeRxFifo ); + + if ( info->params.mode == MGSL_MODE_HDLC || + info->params.mode == MGSL_MODE_RAW ) { + /* DMA mode Transfers */ + /* Program the DMA controller. */ + /* Enable the DMA controller end of buffer interrupt. */ + + /* program 16C32 with physical address of 1st DMA buffer entry */ + phys_addr = info->rx_buffer_list[0].phys_entry; + usc_OutDmaReg( info, NRARL, (u16)phys_addr ); + usc_OutDmaReg( info, NRARU, (u16)(phys_addr >> 16) ); + + usc_UnlatchRxstatusBits( info, RXSTATUS_ALL ); + usc_ClearIrqPendingBits( info, RECEIVE_DATA | RECEIVE_STATUS ); + usc_EnableInterrupts( info, RECEIVE_STATUS ); + + /* 1. Arm End of Buffer (EOB) Receive DMA Interrupt (BIT2 of RDIAR) */ + /* 2. Enable Receive DMA Interrupts (BIT1 of DICR) */ + + usc_OutDmaReg( info, RDIAR, BIT3 | BIT2 ); + usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT1) ); + usc_DmaCmd( info, DmaCmd_InitRxChannel ); + if ( info->params.flags & HDLC_FLAG_AUTO_DCD ) + usc_EnableReceiver(info,ENABLE_AUTO_DCD); + else + usc_EnableReceiver(info,ENABLE_UNCONDITIONAL); + } else { + usc_UnlatchRxstatusBits(info, RXSTATUS_ALL); + usc_ClearIrqPendingBits(info, RECEIVE_DATA | RECEIVE_STATUS); + usc_EnableInterrupts(info, RECEIVE_DATA); + + usc_RTCmd( info, RTCmd_PurgeRxFifo ); + usc_RCmd( info, RCmd_EnterHuntmode ); + + usc_EnableReceiver(info,ENABLE_UNCONDITIONAL); + } + + usc_OutReg( info, CCSR, 0x1020 ); + + info->rx_enabled = true; + +} /* end of usc_start_receiver() */ + +/* usc_start_transmitter() + * + * Enable the USC transmitter and send a transmit frame if + * one is loaded in the DMA buffers. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void usc_start_transmitter( struct mgsl_struct *info ) +{ + u32 phys_addr; + unsigned int FrameSize; + + if (debug_level >= DEBUG_LEVEL_ISR) + printk("%s(%d):usc_start_transmitter(%s)\n", + __FILE__,__LINE__, info->device_name ); + + if ( info->xmit_cnt ) { + + /* If auto RTS enabled and RTS is inactive, then assert */ + /* RTS and set a flag indicating that the driver should */ + /* negate RTS when the transmission completes. */ + + info->drop_rts_on_tx_done = false; + + if ( info->params.flags & HDLC_FLAG_AUTO_RTS ) { + usc_get_serial_signals( info ); + if ( !(info->serial_signals & SerialSignal_RTS) ) { + info->serial_signals |= SerialSignal_RTS; + usc_set_serial_signals( info ); + info->drop_rts_on_tx_done = true; + } + } + + + if ( info->params.mode == MGSL_MODE_ASYNC ) { + if ( !info->tx_active ) { + usc_UnlatchTxstatusBits(info, TXSTATUS_ALL); + usc_ClearIrqPendingBits(info, TRANSMIT_STATUS + TRANSMIT_DATA); + usc_EnableInterrupts(info, TRANSMIT_DATA); + usc_load_txfifo(info); + } + } else { + /* Disable transmit DMA controller while programming. */ + usc_DmaCmd( info, DmaCmd_ResetTxChannel ); + + /* Transmit DMA buffer is loaded, so program USC */ + /* to send the frame contained in the buffers. */ + + FrameSize = info->tx_buffer_list[info->start_tx_dma_buffer].rcc; + + /* if operating in Raw sync mode, reset the rcc component + * of the tx dma buffer entry, otherwise, the serial controller + * will send a closing sync char after this count. + */ + if ( info->params.mode == MGSL_MODE_RAW ) + info->tx_buffer_list[info->start_tx_dma_buffer].rcc = 0; + + /* Program the Transmit Character Length Register (TCLR) */ + /* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */ + usc_OutReg( info, TCLR, (u16)FrameSize ); + + usc_RTCmd( info, RTCmd_PurgeTxFifo ); + + /* Program the address of the 1st DMA Buffer Entry in linked list */ + phys_addr = info->tx_buffer_list[info->start_tx_dma_buffer].phys_entry; + usc_OutDmaReg( info, NTARL, (u16)phys_addr ); + usc_OutDmaReg( info, NTARU, (u16)(phys_addr >> 16) ); + + usc_UnlatchTxstatusBits( info, TXSTATUS_ALL ); + usc_ClearIrqPendingBits( info, TRANSMIT_STATUS ); + usc_EnableInterrupts( info, TRANSMIT_STATUS ); + + if ( info->params.mode == MGSL_MODE_RAW && + info->num_tx_dma_buffers > 1 ) { + /* When running external sync mode, attempt to 'stream' transmit */ + /* by filling tx dma buffers as they become available. To do this */ + /* we need to enable Tx DMA EOB Status interrupts : */ + /* */ + /* 1. Arm End of Buffer (EOB) Transmit DMA Interrupt (BIT2 of TDIAR) */ + /* 2. Enable Transmit DMA Interrupts (BIT0 of DICR) */ + + usc_OutDmaReg( info, TDIAR, BIT2|BIT3 ); + usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT0) ); + } + + /* Initialize Transmit DMA Channel */ + usc_DmaCmd( info, DmaCmd_InitTxChannel ); + + usc_TCmd( info, TCmd_SendFrame ); + + mod_timer(&info->tx_timer, jiffies + + msecs_to_jiffies(5000)); + } + info->tx_active = true; + } + + if ( !info->tx_enabled ) { + info->tx_enabled = true; + if ( info->params.flags & HDLC_FLAG_AUTO_CTS ) + usc_EnableTransmitter(info,ENABLE_AUTO_CTS); + else + usc_EnableTransmitter(info,ENABLE_UNCONDITIONAL); + } + +} /* end of usc_start_transmitter() */ + +/* usc_stop_transmitter() + * + * Stops the transmitter and DMA + * + * Arguments: info pointer to device isntance data + * Return Value: None + */ +static void usc_stop_transmitter( struct mgsl_struct *info ) +{ + if (debug_level >= DEBUG_LEVEL_ISR) + printk("%s(%d):usc_stop_transmitter(%s)\n", + __FILE__,__LINE__, info->device_name ); + + del_timer(&info->tx_timer); + + usc_UnlatchTxstatusBits( info, TXSTATUS_ALL ); + usc_ClearIrqPendingBits( info, TRANSMIT_STATUS + TRANSMIT_DATA ); + usc_DisableInterrupts( info, TRANSMIT_STATUS + TRANSMIT_DATA ); + + usc_EnableTransmitter(info,DISABLE_UNCONDITIONAL); + usc_DmaCmd( info, DmaCmd_ResetTxChannel ); + usc_RTCmd( info, RTCmd_PurgeTxFifo ); + + info->tx_enabled = false; + info->tx_active = false; + +} /* end of usc_stop_transmitter() */ + +/* usc_load_txfifo() + * + * Fill the transmit FIFO until the FIFO is full or + * there is no more data to load. + * + * Arguments: info pointer to device extension (instance data) + * Return Value: None + */ +static void usc_load_txfifo( struct mgsl_struct *info ) +{ + int Fifocount; + u8 TwoBytes[2]; + + if ( !info->xmit_cnt && !info->x_char ) + return; + + /* Select transmit FIFO status readback in TICR */ + usc_TCmd( info, TCmd_SelectTicrTxFifostatus ); + + /* load the Transmit FIFO until FIFOs full or all data sent */ + + while( (Fifocount = usc_InReg(info, TICR) >> 8) && info->xmit_cnt ) { + /* there is more space in the transmit FIFO and */ + /* there is more data in transmit buffer */ + + if ( (info->xmit_cnt > 1) && (Fifocount > 1) && !info->x_char ) { + /* write a 16-bit word from transmit buffer to 16C32 */ + + TwoBytes[0] = info->xmit_buf[info->xmit_tail++]; + info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); + TwoBytes[1] = info->xmit_buf[info->xmit_tail++]; + info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); + + outw( *((u16 *)TwoBytes), info->io_base + DATAREG); + + info->xmit_cnt -= 2; + info->icount.tx += 2; + } else { + /* only 1 byte left to transmit or 1 FIFO slot left */ + + outw( (inw( info->io_base + CCAR) & 0x0780) | (TDR+LSBONLY), + info->io_base + CCAR ); + + if (info->x_char) { + /* transmit pending high priority char */ + outw( info->x_char,info->io_base + CCAR ); + info->x_char = 0; + } else { + outw( info->xmit_buf[info->xmit_tail++],info->io_base + CCAR ); + info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); + info->xmit_cnt--; + } + info->icount.tx++; + } + } + +} /* end of usc_load_txfifo() */ + +/* usc_reset() + * + * Reset the adapter to a known state and prepare it for further use. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void usc_reset( struct mgsl_struct *info ) +{ + int i; + u32 readval; + + /* Set BIT30 of Misc Control Register */ + /* (Local Control Register 0x50) to force reset of USC. */ + + volatile u32 *MiscCtrl = (u32 *)(info->lcr_base + 0x50); + u32 *LCR0BRDR = (u32 *)(info->lcr_base + 0x28); + + info->misc_ctrl_value |= BIT30; + *MiscCtrl = info->misc_ctrl_value; + + /* + * Force at least 170ns delay before clearing reset bit. Each read from + * LCR takes at least 30ns so 10 times for 300ns to be safe. + */ + for(i=0;i<10;i++) + readval = *MiscCtrl; + + info->misc_ctrl_value &= ~BIT30; + *MiscCtrl = info->misc_ctrl_value; + + *LCR0BRDR = BUS_DESCRIPTOR( + 1, // Write Strobe Hold (0-3) + 2, // Write Strobe Delay (0-3) + 2, // Read Strobe Delay (0-3) + 0, // NWDD (Write data-data) (0-3) + 4, // NWAD (Write Addr-data) (0-31) + 0, // NXDA (Read/Write Data-Addr) (0-3) + 0, // NRDD (Read Data-Data) (0-3) + 5 // NRAD (Read Addr-Data) (0-31) + ); + + info->mbre_bit = 0; + info->loopback_bits = 0; + info->usc_idle_mode = 0; + + /* + * Program the Bus Configuration Register (BCR) + * + * <15> 0 Don't use separate address + * <14..6> 0 reserved + * <5..4> 00 IAckmode = Default, don't care + * <3> 1 Bus Request Totem Pole output + * <2> 1 Use 16 Bit data bus + * <1> 0 IRQ Totem Pole output + * <0> 0 Don't Shift Right Addr + * + * 0000 0000 0000 1100 = 0x000c + * + * By writing to io_base + SDPIN the Wait/Ack pin is + * programmed to work as a Wait pin. + */ + + outw( 0x000c,info->io_base + SDPIN ); + + + outw( 0,info->io_base ); + outw( 0,info->io_base + CCAR ); + + /* select little endian byte ordering */ + usc_RTCmd( info, RTCmd_SelectLittleEndian ); + + + /* Port Control Register (PCR) + * + * <15..14> 11 Port 7 is Output (~DMAEN, Bit 14 : 0 = Enabled) + * <13..12> 11 Port 6 is Output (~INTEN, Bit 12 : 0 = Enabled) + * <11..10> 00 Port 5 is Input (No Connect, Don't Care) + * <9..8> 00 Port 4 is Input (No Connect, Don't Care) + * <7..6> 11 Port 3 is Output (~RTS, Bit 6 : 0 = Enabled ) + * <5..4> 11 Port 2 is Output (~DTR, Bit 4 : 0 = Enabled ) + * <3..2> 01 Port 1 is Input (Dedicated RxC) + * <1..0> 01 Port 0 is Input (Dedicated TxC) + * + * 1111 0000 1111 0101 = 0xf0f5 + */ + + usc_OutReg( info, PCR, 0xf0f5 ); + + + /* + * Input/Output Control Register + * + * <15..14> 00 CTS is active low input + * <13..12> 00 DCD is active low input + * <11..10> 00 TxREQ pin is input (DSR) + * <9..8> 00 RxREQ pin is input (RI) + * <7..6> 00 TxD is output (Transmit Data) + * <5..3> 000 TxC Pin in Input (14.7456MHz Clock) + * <2..0> 100 RxC is Output (drive with BRG0) + * + * 0000 0000 0000 0100 = 0x0004 + */ + + usc_OutReg( info, IOCR, 0x0004 ); + +} /* end of usc_reset() */ + +/* usc_set_async_mode() + * + * Program adapter for asynchronous communications. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void usc_set_async_mode( struct mgsl_struct *info ) +{ + u16 RegValue; + + /* disable interrupts while programming USC */ + usc_DisableMasterIrqBit( info ); + + outw( 0, info->io_base ); /* clear Master Bus Enable (DCAR) */ + usc_DmaCmd( info, DmaCmd_ResetAllChannels ); /* disable both DMA channels */ + + usc_loopback_frame( info ); + + /* Channel mode Register (CMR) + * + * <15..14> 00 Tx Sub modes, 00 = 1 Stop Bit + * <13..12> 00 00 = 16X Clock + * <11..8> 0000 Transmitter mode = Asynchronous + * <7..6> 00 reserved? + * <5..4> 00 Rx Sub modes, 00 = 16X Clock + * <3..0> 0000 Receiver mode = Asynchronous + * + * 0000 0000 0000 0000 = 0x0 + */ + + RegValue = 0; + if ( info->params.stop_bits != 1 ) + RegValue |= BIT14; + usc_OutReg( info, CMR, RegValue ); + + + /* Receiver mode Register (RMR) + * + * <15..13> 000 encoding = None + * <12..08> 00000 reserved (Sync Only) + * <7..6> 00 Even parity + * <5> 0 parity disabled + * <4..2> 000 Receive Char Length = 8 bits + * <1..0> 00 Disable Receiver + * + * 0000 0000 0000 0000 = 0x0 + */ + + RegValue = 0; + + if ( info->params.data_bits != 8 ) + RegValue |= BIT4 | BIT3 | BIT2; + + if ( info->params.parity != ASYNC_PARITY_NONE ) { + RegValue |= BIT5; + if ( info->params.parity != ASYNC_PARITY_ODD ) + RegValue |= BIT6; + } + + usc_OutReg( info, RMR, RegValue ); + + + /* Set IRQ trigger level */ + + usc_RCmd( info, RCmd_SelectRicrIntLevel ); + + + /* Receive Interrupt Control Register (RICR) + * + * <15..8> ? RxFIFO IRQ Request Level + * + * Note: For async mode the receive FIFO level must be set + * to 0 to avoid the situation where the FIFO contains fewer bytes + * than the trigger level and no more data is expected. + * + * <7> 0 Exited Hunt IA (Interrupt Arm) + * <6> 0 Idle Received IA + * <5> 0 Break/Abort IA + * <4> 0 Rx Bound IA + * <3> 0 Queued status reflects oldest byte in FIFO + * <2> 0 Abort/PE IA + * <1> 0 Rx Overrun IA + * <0> 0 Select TC0 value for readback + * + * 0000 0000 0100 0000 = 0x0000 + (FIFOLEVEL in MSB) + */ + + usc_OutReg( info, RICR, 0x0000 ); + + usc_UnlatchRxstatusBits( info, RXSTATUS_ALL ); + usc_ClearIrqPendingBits( info, RECEIVE_STATUS ); + + + /* Transmit mode Register (TMR) + * + * <15..13> 000 encoding = None + * <12..08> 00000 reserved (Sync Only) + * <7..6> 00 Transmit parity Even + * <5> 0 Transmit parity Disabled + * <4..2> 000 Tx Char Length = 8 bits + * <1..0> 00 Disable Transmitter + * + * 0000 0000 0000 0000 = 0x0 + */ + + RegValue = 0; + + if ( info->params.data_bits != 8 ) + RegValue |= BIT4 | BIT3 | BIT2; + + if ( info->params.parity != ASYNC_PARITY_NONE ) { + RegValue |= BIT5; + if ( info->params.parity != ASYNC_PARITY_ODD ) + RegValue |= BIT6; + } + + usc_OutReg( info, TMR, RegValue ); + + usc_set_txidle( info ); + + + /* Set IRQ trigger level */ + + usc_TCmd( info, TCmd_SelectTicrIntLevel ); + + + /* Transmit Interrupt Control Register (TICR) + * + * <15..8> ? Transmit FIFO IRQ Level + * <7> 0 Present IA (Interrupt Arm) + * <6> 1 Idle Sent IA + * <5> 0 Abort Sent IA + * <4> 0 EOF/EOM Sent IA + * <3> 0 CRC Sent IA + * <2> 0 1 = Wait for SW Trigger to Start Frame + * <1> 0 Tx Underrun IA + * <0> 0 TC0 constant on read back + * + * 0000 0000 0100 0000 = 0x0040 + */ + + usc_OutReg( info, TICR, 0x1f40 ); + + usc_UnlatchTxstatusBits( info, TXSTATUS_ALL ); + usc_ClearIrqPendingBits( info, TRANSMIT_STATUS ); + + usc_enable_async_clock( info, info->params.data_rate ); + + + /* Channel Control/status Register (CCSR) + * + * <15> X RCC FIFO Overflow status (RO) + * <14> X RCC FIFO Not Empty status (RO) + * <13> 0 1 = Clear RCC FIFO (WO) + * <12> X DPLL in Sync status (RO) + * <11> X DPLL 2 Missed Clocks status (RO) + * <10> X DPLL 1 Missed Clock status (RO) + * <9..8> 00 DPLL Resync on rising and falling edges (RW) + * <7> X SDLC Loop On status (RO) + * <6> X SDLC Loop Send status (RO) + * <5> 1 Bypass counters for TxClk and RxClk (RW) + * <4..2> 000 Last Char of SDLC frame has 8 bits (RW) + * <1..0> 00 reserved + * + * 0000 0000 0010 0000 = 0x0020 + */ + + usc_OutReg( info, CCSR, 0x0020 ); + + usc_DisableInterrupts( info, TRANSMIT_STATUS + TRANSMIT_DATA + + RECEIVE_DATA + RECEIVE_STATUS ); + + usc_ClearIrqPendingBits( info, TRANSMIT_STATUS + TRANSMIT_DATA + + RECEIVE_DATA + RECEIVE_STATUS ); + + usc_EnableMasterIrqBit( info ); + + if (info->params.loopback) { + info->loopback_bits = 0x300; + outw(0x0300, info->io_base + CCAR); + } + +} /* end of usc_set_async_mode() */ + +/* usc_loopback_frame() + * + * Loop back a small (2 byte) dummy SDLC frame. + * Interrupts and DMA are NOT used. The purpose of this is to + * clear any 'stale' status info left over from running in async mode. + * + * The 16C32 shows the strange behaviour of marking the 1st + * received SDLC frame with a CRC error even when there is no + * CRC error. To get around this a small dummy from of 2 bytes + * is looped back when switching from async to sync mode. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void usc_loopback_frame( struct mgsl_struct *info ) +{ + int i; + unsigned long oldmode = info->params.mode; + + info->params.mode = MGSL_MODE_HDLC; + + usc_DisableMasterIrqBit( info ); + + usc_set_sdlc_mode( info ); + usc_enable_loopback( info, 1 ); + + /* Write 16-bit Time Constant for BRG0 */ + usc_OutReg( info, TC0R, 0 ); + + /* Channel Control Register (CCR) + * + * <15..14> 00 Don't use 32-bit Tx Control Blocks (TCBs) + * <13> 0 Trigger Tx on SW Command Disabled + * <12> 0 Flag Preamble Disabled + * <11..10> 00 Preamble Length = 8-Bits + * <9..8> 01 Preamble Pattern = flags + * <7..6> 10 Don't use 32-bit Rx status Blocks (RSBs) + * <5> 0 Trigger Rx on SW Command Disabled + * <4..0> 0 reserved + * + * 0000 0001 0000 0000 = 0x0100 + */ + + usc_OutReg( info, CCR, 0x0100 ); + + /* SETUP RECEIVER */ + usc_RTCmd( info, RTCmd_PurgeRxFifo ); + usc_EnableReceiver(info,ENABLE_UNCONDITIONAL); + + /* SETUP TRANSMITTER */ + /* Program the Transmit Character Length Register (TCLR) */ + /* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */ + usc_OutReg( info, TCLR, 2 ); + usc_RTCmd( info, RTCmd_PurgeTxFifo ); + + /* unlatch Tx status bits, and start transmit channel. */ + usc_UnlatchTxstatusBits(info,TXSTATUS_ALL); + outw(0,info->io_base + DATAREG); + + /* ENABLE TRANSMITTER */ + usc_TCmd( info, TCmd_SendFrame ); + usc_EnableTransmitter(info,ENABLE_UNCONDITIONAL); + + /* WAIT FOR RECEIVE COMPLETE */ + for (i=0 ; i<1000 ; i++) + if (usc_InReg( info, RCSR ) & (BIT8 | BIT4 | BIT3 | BIT1)) + break; + + /* clear Internal Data loopback mode */ + usc_enable_loopback(info, 0); + + usc_EnableMasterIrqBit(info); + + info->params.mode = oldmode; + +} /* end of usc_loopback_frame() */ + +/* usc_set_sync_mode() Programs the USC for SDLC communications. + * + * Arguments: info pointer to adapter info structure + * Return Value: None + */ +static void usc_set_sync_mode( struct mgsl_struct *info ) +{ + usc_loopback_frame( info ); + usc_set_sdlc_mode( info ); + + usc_enable_aux_clock(info, info->params.clock_speed); + + if (info->params.loopback) + usc_enable_loopback(info,1); + +} /* end of mgsl_set_sync_mode() */ + +/* usc_set_txidle() Set the HDLC idle mode for the transmitter. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void usc_set_txidle( struct mgsl_struct *info ) +{ + u16 usc_idle_mode = IDLEMODE_FLAGS; + + /* Map API idle mode to USC register bits */ + + switch( info->idle_mode ){ + case HDLC_TXIDLE_FLAGS: usc_idle_mode = IDLEMODE_FLAGS; break; + case HDLC_TXIDLE_ALT_ZEROS_ONES: usc_idle_mode = IDLEMODE_ALT_ONE_ZERO; break; + case HDLC_TXIDLE_ZEROS: usc_idle_mode = IDLEMODE_ZERO; break; + case HDLC_TXIDLE_ONES: usc_idle_mode = IDLEMODE_ONE; break; + case HDLC_TXIDLE_ALT_MARK_SPACE: usc_idle_mode = IDLEMODE_ALT_MARK_SPACE; break; + case HDLC_TXIDLE_SPACE: usc_idle_mode = IDLEMODE_SPACE; break; + case HDLC_TXIDLE_MARK: usc_idle_mode = IDLEMODE_MARK; break; + } + + info->usc_idle_mode = usc_idle_mode; + //usc_OutReg(info, TCSR, usc_idle_mode); + info->tcsr_value &= ~IDLEMODE_MASK; /* clear idle mode bits */ + info->tcsr_value += usc_idle_mode; + usc_OutReg(info, TCSR, info->tcsr_value); + + /* + * if SyncLink WAN adapter is running in external sync mode, the + * transmitter has been set to Monosync in order to try to mimic + * a true raw outbound bit stream. Monosync still sends an open/close + * sync char at the start/end of a frame. Try to match those sync + * patterns to the idle mode set here + */ + if ( info->params.mode == MGSL_MODE_RAW ) { + unsigned char syncpat = 0; + switch( info->idle_mode ) { + case HDLC_TXIDLE_FLAGS: + syncpat = 0x7e; + break; + case HDLC_TXIDLE_ALT_ZEROS_ONES: + syncpat = 0x55; + break; + case HDLC_TXIDLE_ZEROS: + case HDLC_TXIDLE_SPACE: + syncpat = 0x00; + break; + case HDLC_TXIDLE_ONES: + case HDLC_TXIDLE_MARK: + syncpat = 0xff; + break; + case HDLC_TXIDLE_ALT_MARK_SPACE: + syncpat = 0xaa; + break; + } + + usc_SetTransmitSyncChars(info,syncpat,syncpat); + } + +} /* end of usc_set_txidle() */ + +/* usc_get_serial_signals() + * + * Query the adapter for the state of the V24 status (input) signals. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void usc_get_serial_signals( struct mgsl_struct *info ) +{ + u16 status; + + /* clear all serial signals except RTS and DTR */ + info->serial_signals &= SerialSignal_RTS | SerialSignal_DTR; + + /* Read the Misc Interrupt status Register (MISR) to get */ + /* the V24 status signals. */ + + status = usc_InReg( info, MISR ); + + /* set serial signal bits to reflect MISR */ + + if ( status & MISCSTATUS_CTS ) + info->serial_signals |= SerialSignal_CTS; + + if ( status & MISCSTATUS_DCD ) + info->serial_signals |= SerialSignal_DCD; + + if ( status & MISCSTATUS_RI ) + info->serial_signals |= SerialSignal_RI; + + if ( status & MISCSTATUS_DSR ) + info->serial_signals |= SerialSignal_DSR; + +} /* end of usc_get_serial_signals() */ + +/* usc_set_serial_signals() + * + * Set the state of RTS and DTR based on contents of + * serial_signals member of device extension. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void usc_set_serial_signals( struct mgsl_struct *info ) +{ + u16 Control; + unsigned char V24Out = info->serial_signals; + + /* get the current value of the Port Control Register (PCR) */ + + Control = usc_InReg( info, PCR ); + + if ( V24Out & SerialSignal_RTS ) + Control &= ~(BIT6); + else + Control |= BIT6; + + if ( V24Out & SerialSignal_DTR ) + Control &= ~(BIT4); + else + Control |= BIT4; + + usc_OutReg( info, PCR, Control ); + +} /* end of usc_set_serial_signals() */ + +/* usc_enable_async_clock() + * + * Enable the async clock at the specified frequency. + * + * Arguments: info pointer to device instance data + * data_rate data rate of clock in bps + * 0 disables the AUX clock. + * Return Value: None + */ +static void usc_enable_async_clock( struct mgsl_struct *info, u32 data_rate ) +{ + if ( data_rate ) { + /* + * Clock mode Control Register (CMCR) + * + * <15..14> 00 counter 1 Disabled + * <13..12> 00 counter 0 Disabled + * <11..10> 11 BRG1 Input is TxC Pin + * <9..8> 11 BRG0 Input is TxC Pin + * <7..6> 01 DPLL Input is BRG1 Output + * <5..3> 100 TxCLK comes from BRG0 + * <2..0> 100 RxCLK comes from BRG0 + * + * 0000 1111 0110 0100 = 0x0f64 + */ + + usc_OutReg( info, CMCR, 0x0f64 ); + + + /* + * Write 16-bit Time Constant for BRG0 + * Time Constant = (ClkSpeed / data_rate) - 1 + * ClkSpeed = 921600 (ISA), 691200 (PCI) + */ + + usc_OutReg( info, TC0R, (u16)((691200/data_rate) - 1) ); + + /* + * Hardware Configuration Register (HCR) + * Clear Bit 1, BRG0 mode = Continuous + * Set Bit 0 to enable BRG0. + */ + + usc_OutReg( info, HCR, + (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) ); + + + /* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */ + + usc_OutReg( info, IOCR, + (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004) ); + } else { + /* data rate == 0 so turn off BRG0 */ + usc_OutReg( info, HCR, (u16)(usc_InReg( info, HCR ) & ~BIT0) ); + } + +} /* end of usc_enable_async_clock() */ + +/* + * Buffer Structures: + * + * Normal memory access uses virtual addresses that can make discontiguous + * physical memory pages appear to be contiguous in the virtual address + * space (the processors memory mapping handles the conversions). + * + * DMA transfers require physically contiguous memory. This is because + * the DMA system controller and DMA bus masters deal with memory using + * only physical addresses. + * + * This causes a problem under Windows NT when large DMA buffers are + * needed. Fragmentation of the nonpaged pool prevents allocations of + * physically contiguous buffers larger than the PAGE_SIZE. + * + * However the 16C32 supports Bus Master Scatter/Gather DMA which + * allows DMA transfers to physically discontiguous buffers. Information + * about each data transfer buffer is contained in a memory structure + * called a 'buffer entry'. A list of buffer entries is maintained + * to track and control the use of the data transfer buffers. + * + * To support this strategy we will allocate sufficient PAGE_SIZE + * contiguous memory buffers to allow for the total required buffer + * space. + * + * The 16C32 accesses the list of buffer entries using Bus Master + * DMA. Control information is read from the buffer entries by the + * 16C32 to control data transfers. status information is written to + * the buffer entries by the 16C32 to indicate the status of completed + * transfers. + * + * The CPU writes control information to the buffer entries to control + * the 16C32 and reads status information from the buffer entries to + * determine information about received and transmitted frames. + * + * Because the CPU and 16C32 (adapter) both need simultaneous access + * to the buffer entries, the buffer entry memory is allocated with + * HalAllocateCommonBuffer(). This restricts the size of the buffer + * entry list to PAGE_SIZE. + * + * The actual data buffers on the other hand will only be accessed + * by the CPU or the adapter but not by both simultaneously. This allows + * Scatter/Gather packet based DMA procedures for using physically + * discontiguous pages. + */ + +/* + * mgsl_reset_tx_dma_buffers() + * + * Set the count for all transmit buffers to 0 to indicate the + * buffer is available for use and set the current buffer to the + * first buffer. This effectively makes all buffers free and + * discards any data in buffers. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void mgsl_reset_tx_dma_buffers( struct mgsl_struct *info ) +{ + unsigned int i; + + for ( i = 0; i < info->tx_buffer_count; i++ ) { + *((unsigned long *)&(info->tx_buffer_list[i].count)) = 0; + } + + info->current_tx_buffer = 0; + info->start_tx_dma_buffer = 0; + info->tx_dma_buffers_used = 0; + + info->get_tx_holding_index = 0; + info->put_tx_holding_index = 0; + info->tx_holding_count = 0; + +} /* end of mgsl_reset_tx_dma_buffers() */ + +/* + * num_free_tx_dma_buffers() + * + * returns the number of free tx dma buffers available + * + * Arguments: info pointer to device instance data + * Return Value: number of free tx dma buffers + */ +static int num_free_tx_dma_buffers(struct mgsl_struct *info) +{ + return info->tx_buffer_count - info->tx_dma_buffers_used; +} + +/* + * mgsl_reset_rx_dma_buffers() + * + * Set the count for all receive buffers to DMABUFFERSIZE + * and set the current buffer to the first buffer. This effectively + * makes all buffers free and discards any data in buffers. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void mgsl_reset_rx_dma_buffers( struct mgsl_struct *info ) +{ + unsigned int i; + + for ( i = 0; i < info->rx_buffer_count; i++ ) { + *((unsigned long *)&(info->rx_buffer_list[i].count)) = DMABUFFERSIZE; +// info->rx_buffer_list[i].count = DMABUFFERSIZE; +// info->rx_buffer_list[i].status = 0; + } + + info->current_rx_buffer = 0; + +} /* end of mgsl_reset_rx_dma_buffers() */ + +/* + * mgsl_free_rx_frame_buffers() + * + * Free the receive buffers used by a received SDLC + * frame such that the buffers can be reused. + * + * Arguments: + * + * info pointer to device instance data + * StartIndex index of 1st receive buffer of frame + * EndIndex index of last receive buffer of frame + * + * Return Value: None + */ +static void mgsl_free_rx_frame_buffers( struct mgsl_struct *info, unsigned int StartIndex, unsigned int EndIndex ) +{ + bool Done = false; + DMABUFFERENTRY *pBufEntry; + unsigned int Index; + + /* Starting with 1st buffer entry of the frame clear the status */ + /* field and set the count field to DMA Buffer Size. */ + + Index = StartIndex; + + while( !Done ) { + pBufEntry = &(info->rx_buffer_list[Index]); + + if ( Index == EndIndex ) { + /* This is the last buffer of the frame! */ + Done = true; + } + + /* reset current buffer for reuse */ +// pBufEntry->status = 0; +// pBufEntry->count = DMABUFFERSIZE; + *((unsigned long *)&(pBufEntry->count)) = DMABUFFERSIZE; + + /* advance to next buffer entry in linked list */ + Index++; + if ( Index == info->rx_buffer_count ) + Index = 0; + } + + /* set current buffer to next buffer after last buffer of frame */ + info->current_rx_buffer = Index; + +} /* end of free_rx_frame_buffers() */ + +/* mgsl_get_rx_frame() + * + * This function attempts to return a received SDLC frame from the + * receive DMA buffers. Only frames received without errors are returned. + * + * Arguments: info pointer to device extension + * Return Value: true if frame returned, otherwise false + */ +static bool mgsl_get_rx_frame(struct mgsl_struct *info) +{ + unsigned int StartIndex, EndIndex; /* index of 1st and last buffers of Rx frame */ + unsigned short status; + DMABUFFERENTRY *pBufEntry; + unsigned int framesize = 0; + bool ReturnCode = false; + unsigned long flags; + struct tty_struct *tty = info->port.tty; + bool return_frame = false; + + /* + * current_rx_buffer points to the 1st buffer of the next available + * receive frame. To find the last buffer of the frame look for + * a non-zero status field in the buffer entries. (The status + * field is set by the 16C32 after completing a receive frame. + */ + + StartIndex = EndIndex = info->current_rx_buffer; + + while( !info->rx_buffer_list[EndIndex].status ) { + /* + * If the count field of the buffer entry is non-zero then + * this buffer has not been used. (The 16C32 clears the count + * field when it starts using the buffer.) If an unused buffer + * is encountered then there are no frames available. + */ + + if ( info->rx_buffer_list[EndIndex].count ) + goto Cleanup; + + /* advance to next buffer entry in linked list */ + EndIndex++; + if ( EndIndex == info->rx_buffer_count ) + EndIndex = 0; + + /* if entire list searched then no frame available */ + if ( EndIndex == StartIndex ) { + /* If this occurs then something bad happened, + * all buffers have been 'used' but none mark + * the end of a frame. Reset buffers and receiver. + */ + + if ( info->rx_enabled ){ + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_start_receiver(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + } + goto Cleanup; + } + } + + + /* check status of receive frame */ + + status = info->rx_buffer_list[EndIndex].status; + + if ( status & (RXSTATUS_SHORT_FRAME | RXSTATUS_OVERRUN | + RXSTATUS_CRC_ERROR | RXSTATUS_ABORT) ) { + if ( status & RXSTATUS_SHORT_FRAME ) + info->icount.rxshort++; + else if ( status & RXSTATUS_ABORT ) + info->icount.rxabort++; + else if ( status & RXSTATUS_OVERRUN ) + info->icount.rxover++; + else { + info->icount.rxcrc++; + if ( info->params.crc_type & HDLC_CRC_RETURN_EX ) + return_frame = true; + } + framesize = 0; +#if SYNCLINK_GENERIC_HDLC + { + info->netdev->stats.rx_errors++; + info->netdev->stats.rx_frame_errors++; + } +#endif + } else + return_frame = true; + + if ( return_frame ) { + /* receive frame has no errors, get frame size. + * The frame size is the starting value of the RCC (which was + * set to 0xffff) minus the ending value of the RCC (decremented + * once for each receive character) minus 2 for the 16-bit CRC. + */ + + framesize = RCLRVALUE - info->rx_buffer_list[EndIndex].rcc; + + /* adjust frame size for CRC if any */ + if ( info->params.crc_type == HDLC_CRC_16_CCITT ) + framesize -= 2; + else if ( info->params.crc_type == HDLC_CRC_32_CCITT ) + framesize -= 4; + } + + if ( debug_level >= DEBUG_LEVEL_BH ) + printk("%s(%d):mgsl_get_rx_frame(%s) status=%04X size=%d\n", + __FILE__,__LINE__,info->device_name,status,framesize); + + if ( debug_level >= DEBUG_LEVEL_DATA ) + mgsl_trace_block(info,info->rx_buffer_list[StartIndex].virt_addr, + min_t(int, framesize, DMABUFFERSIZE),0); + + if (framesize) { + if ( ( (info->params.crc_type & HDLC_CRC_RETURN_EX) && + ((framesize+1) > info->max_frame_size) ) || + (framesize > info->max_frame_size) ) + info->icount.rxlong++; + else { + /* copy dma buffer(s) to contiguous intermediate buffer */ + int copy_count = framesize; + int index = StartIndex; + unsigned char *ptmp = info->intermediate_rxbuffer; + + if ( !(status & RXSTATUS_CRC_ERROR)) + info->icount.rxok++; + + while(copy_count) { + int partial_count; + if ( copy_count > DMABUFFERSIZE ) + partial_count = DMABUFFERSIZE; + else + partial_count = copy_count; + + pBufEntry = &(info->rx_buffer_list[index]); + memcpy( ptmp, pBufEntry->virt_addr, partial_count ); + ptmp += partial_count; + copy_count -= partial_count; + + if ( ++index == info->rx_buffer_count ) + index = 0; + } + + if ( info->params.crc_type & HDLC_CRC_RETURN_EX ) { + ++framesize; + *ptmp = (status & RXSTATUS_CRC_ERROR ? + RX_CRC_ERROR : + RX_OK); + + if ( debug_level >= DEBUG_LEVEL_DATA ) + printk("%s(%d):mgsl_get_rx_frame(%s) rx frame status=%d\n", + __FILE__,__LINE__,info->device_name, + *ptmp); + } + +#if SYNCLINK_GENERIC_HDLC + if (info->netcount) + hdlcdev_rx(info,info->intermediate_rxbuffer,framesize); + else +#endif + ldisc_receive_buf(tty, info->intermediate_rxbuffer, info->flag_buf, framesize); + } + } + /* Free the buffers used by this frame. */ + mgsl_free_rx_frame_buffers( info, StartIndex, EndIndex ); + + ReturnCode = true; + +Cleanup: + + if ( info->rx_enabled && info->rx_overflow ) { + /* The receiver needs to restarted because of + * a receive overflow (buffer or FIFO). If the + * receive buffers are now empty, then restart receiver. + */ + + if ( !info->rx_buffer_list[EndIndex].status && + info->rx_buffer_list[EndIndex].count ) { + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_start_receiver(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + } + } + + return ReturnCode; + +} /* end of mgsl_get_rx_frame() */ + +/* mgsl_get_raw_rx_frame() + * + * This function attempts to return a received frame from the + * receive DMA buffers when running in external loop mode. In this mode, + * we will return at most one DMABUFFERSIZE frame to the application. + * The USC receiver is triggering off of DCD going active to start a new + * frame, and DCD going inactive to terminate the frame (similar to + * processing a closing flag character). + * + * In this routine, we will return DMABUFFERSIZE "chunks" at a time. + * If DCD goes inactive, the last Rx DMA Buffer will have a non-zero + * status field and the RCC field will indicate the length of the + * entire received frame. We take this RCC field and get the modulus + * of RCC and DMABUFFERSIZE to determine if number of bytes in the + * last Rx DMA buffer and return that last portion of the frame. + * + * Arguments: info pointer to device extension + * Return Value: true if frame returned, otherwise false + */ +static bool mgsl_get_raw_rx_frame(struct mgsl_struct *info) +{ + unsigned int CurrentIndex, NextIndex; + unsigned short status; + DMABUFFERENTRY *pBufEntry; + unsigned int framesize = 0; + bool ReturnCode = false; + unsigned long flags; + struct tty_struct *tty = info->port.tty; + + /* + * current_rx_buffer points to the 1st buffer of the next available + * receive frame. The status field is set by the 16C32 after + * completing a receive frame. If the status field of this buffer + * is zero, either the USC is still filling this buffer or this + * is one of a series of buffers making up a received frame. + * + * If the count field of this buffer is zero, the USC is either + * using this buffer or has used this buffer. Look at the count + * field of the next buffer. If that next buffer's count is + * non-zero, the USC is still actively using the current buffer. + * Otherwise, if the next buffer's count field is zero, the + * current buffer is complete and the USC is using the next + * buffer. + */ + CurrentIndex = NextIndex = info->current_rx_buffer; + ++NextIndex; + if ( NextIndex == info->rx_buffer_count ) + NextIndex = 0; + + if ( info->rx_buffer_list[CurrentIndex].status != 0 || + (info->rx_buffer_list[CurrentIndex].count == 0 && + info->rx_buffer_list[NextIndex].count == 0)) { + /* + * Either the status field of this dma buffer is non-zero + * (indicating the last buffer of a receive frame) or the next + * buffer is marked as in use -- implying this buffer is complete + * and an intermediate buffer for this received frame. + */ + + status = info->rx_buffer_list[CurrentIndex].status; + + if ( status & (RXSTATUS_SHORT_FRAME | RXSTATUS_OVERRUN | + RXSTATUS_CRC_ERROR | RXSTATUS_ABORT) ) { + if ( status & RXSTATUS_SHORT_FRAME ) + info->icount.rxshort++; + else if ( status & RXSTATUS_ABORT ) + info->icount.rxabort++; + else if ( status & RXSTATUS_OVERRUN ) + info->icount.rxover++; + else + info->icount.rxcrc++; + framesize = 0; + } else { + /* + * A receive frame is available, get frame size and status. + * + * The frame size is the starting value of the RCC (which was + * set to 0xffff) minus the ending value of the RCC (decremented + * once for each receive character) minus 2 or 4 for the 16-bit + * or 32-bit CRC. + * + * If the status field is zero, this is an intermediate buffer. + * It's size is 4K. + * + * If the DMA Buffer Entry's Status field is non-zero, the + * receive operation completed normally (ie: DCD dropped). The + * RCC field is valid and holds the received frame size. + * It is possible that the RCC field will be zero on a DMA buffer + * entry with a non-zero status. This can occur if the total + * frame size (number of bytes between the time DCD goes active + * to the time DCD goes inactive) exceeds 65535 bytes. In this + * case the 16C32 has underrun on the RCC count and appears to + * stop updating this counter to let us know the actual received + * frame size. If this happens (non-zero status and zero RCC), + * simply return the entire RxDMA Buffer + */ + if ( status ) { + /* + * In the event that the final RxDMA Buffer is + * terminated with a non-zero status and the RCC + * field is zero, we interpret this as the RCC + * having underflowed (received frame > 65535 bytes). + * + * Signal the event to the user by passing back + * a status of RxStatus_CrcError returning the full + * buffer and let the app figure out what data is + * actually valid + */ + if ( info->rx_buffer_list[CurrentIndex].rcc ) + framesize = RCLRVALUE - info->rx_buffer_list[CurrentIndex].rcc; + else + framesize = DMABUFFERSIZE; + } + else + framesize = DMABUFFERSIZE; + } + + if ( framesize > DMABUFFERSIZE ) { + /* + * if running in raw sync mode, ISR handler for + * End Of Buffer events terminates all buffers at 4K. + * If this frame size is said to be >4K, get the + * actual number of bytes of the frame in this buffer. + */ + framesize = framesize % DMABUFFERSIZE; + } + + + if ( debug_level >= DEBUG_LEVEL_BH ) + printk("%s(%d):mgsl_get_raw_rx_frame(%s) status=%04X size=%d\n", + __FILE__,__LINE__,info->device_name,status,framesize); + + if ( debug_level >= DEBUG_LEVEL_DATA ) + mgsl_trace_block(info,info->rx_buffer_list[CurrentIndex].virt_addr, + min_t(int, framesize, DMABUFFERSIZE),0); + + if (framesize) { + /* copy dma buffer(s) to contiguous intermediate buffer */ + /* NOTE: we never copy more than DMABUFFERSIZE bytes */ + + pBufEntry = &(info->rx_buffer_list[CurrentIndex]); + memcpy( info->intermediate_rxbuffer, pBufEntry->virt_addr, framesize); + info->icount.rxok++; + + ldisc_receive_buf(tty, info->intermediate_rxbuffer, info->flag_buf, framesize); + } + + /* Free the buffers used by this frame. */ + mgsl_free_rx_frame_buffers( info, CurrentIndex, CurrentIndex ); + + ReturnCode = true; + } + + + if ( info->rx_enabled && info->rx_overflow ) { + /* The receiver needs to restarted because of + * a receive overflow (buffer or FIFO). If the + * receive buffers are now empty, then restart receiver. + */ + + if ( !info->rx_buffer_list[CurrentIndex].status && + info->rx_buffer_list[CurrentIndex].count ) { + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_start_receiver(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + } + } + + return ReturnCode; + +} /* end of mgsl_get_raw_rx_frame() */ + +/* mgsl_load_tx_dma_buffer() + * + * Load the transmit DMA buffer with the specified data. + * + * Arguments: + * + * info pointer to device extension + * Buffer pointer to buffer containing frame to load + * BufferSize size in bytes of frame in Buffer + * + * Return Value: None + */ +static void mgsl_load_tx_dma_buffer(struct mgsl_struct *info, + const char *Buffer, unsigned int BufferSize) +{ + unsigned short Copycount; + unsigned int i = 0; + DMABUFFERENTRY *pBufEntry; + + if ( debug_level >= DEBUG_LEVEL_DATA ) + mgsl_trace_block(info,Buffer, min_t(int, BufferSize, DMABUFFERSIZE), 1); + + if (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) { + /* set CMR:13 to start transmit when + * next GoAhead (abort) is received + */ + info->cmr_value |= BIT13; + } + + /* begin loading the frame in the next available tx dma + * buffer, remember it's starting location for setting + * up tx dma operation + */ + i = info->current_tx_buffer; + info->start_tx_dma_buffer = i; + + /* Setup the status and RCC (Frame Size) fields of the 1st */ + /* buffer entry in the transmit DMA buffer list. */ + + info->tx_buffer_list[i].status = info->cmr_value & 0xf000; + info->tx_buffer_list[i].rcc = BufferSize; + info->tx_buffer_list[i].count = BufferSize; + + /* Copy frame data from 1st source buffer to the DMA buffers. */ + /* The frame data may span multiple DMA buffers. */ + + while( BufferSize ){ + /* Get a pointer to next DMA buffer entry. */ + pBufEntry = &info->tx_buffer_list[i++]; + + if ( i == info->tx_buffer_count ) + i=0; + + /* Calculate the number of bytes that can be copied from */ + /* the source buffer to this DMA buffer. */ + if ( BufferSize > DMABUFFERSIZE ) + Copycount = DMABUFFERSIZE; + else + Copycount = BufferSize; + + /* Actually copy data from source buffer to DMA buffer. */ + /* Also set the data count for this individual DMA buffer. */ + mgsl_load_pci_memory(pBufEntry->virt_addr, Buffer,Copycount); + + pBufEntry->count = Copycount; + + /* Advance source pointer and reduce remaining data count. */ + Buffer += Copycount; + BufferSize -= Copycount; + + ++info->tx_dma_buffers_used; + } + + /* remember next available tx dma buffer */ + info->current_tx_buffer = i; + +} /* end of mgsl_load_tx_dma_buffer() */ + +/* + * mgsl_register_test() + * + * Performs a register test of the 16C32. + * + * Arguments: info pointer to device instance data + * Return Value: true if test passed, otherwise false + */ +static bool mgsl_register_test( struct mgsl_struct *info ) +{ + static unsigned short BitPatterns[] = + { 0x0000, 0xffff, 0xaaaa, 0x5555, 0x1234, 0x6969, 0x9696, 0x0f0f }; + static unsigned int Patterncount = ARRAY_SIZE(BitPatterns); + unsigned int i; + bool rc = true; + unsigned long flags; + + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_reset(info); + + /* Verify the reset state of some registers. */ + + if ( (usc_InReg( info, SICR ) != 0) || + (usc_InReg( info, IVR ) != 0) || + (usc_InDmaReg( info, DIVR ) != 0) ){ + rc = false; + } + + if ( rc ){ + /* Write bit patterns to various registers but do it out of */ + /* sync, then read back and verify values. */ + + for ( i = 0 ; i < Patterncount ; i++ ) { + usc_OutReg( info, TC0R, BitPatterns[i] ); + usc_OutReg( info, TC1R, BitPatterns[(i+1)%Patterncount] ); + usc_OutReg( info, TCLR, BitPatterns[(i+2)%Patterncount] ); + usc_OutReg( info, RCLR, BitPatterns[(i+3)%Patterncount] ); + usc_OutReg( info, RSR, BitPatterns[(i+4)%Patterncount] ); + usc_OutDmaReg( info, TBCR, BitPatterns[(i+5)%Patterncount] ); + + if ( (usc_InReg( info, TC0R ) != BitPatterns[i]) || + (usc_InReg( info, TC1R ) != BitPatterns[(i+1)%Patterncount]) || + (usc_InReg( info, TCLR ) != BitPatterns[(i+2)%Patterncount]) || + (usc_InReg( info, RCLR ) != BitPatterns[(i+3)%Patterncount]) || + (usc_InReg( info, RSR ) != BitPatterns[(i+4)%Patterncount]) || + (usc_InDmaReg( info, TBCR ) != BitPatterns[(i+5)%Patterncount]) ){ + rc = false; + break; + } + } + } + + usc_reset(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + return rc; + +} /* end of mgsl_register_test() */ + +/* mgsl_irq_test() Perform interrupt test of the 16C32. + * + * Arguments: info pointer to device instance data + * Return Value: true if test passed, otherwise false + */ +static bool mgsl_irq_test( struct mgsl_struct *info ) +{ + unsigned long EndTime; + unsigned long flags; + + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_reset(info); + + /* + * Setup 16C32 to interrupt on TxC pin (14MHz clock) transition. + * The ISR sets irq_occurred to true. + */ + + info->irq_occurred = false; + + /* Enable INTEN gate for ISA adapter (Port 6, Bit12) */ + /* Enable INTEN (Port 6, Bit12) */ + /* This connects the IRQ request signal to the ISA bus */ + /* on the ISA adapter. This has no effect for the PCI adapter */ + usc_OutReg( info, PCR, (unsigned short)((usc_InReg(info, PCR) | BIT13) & ~BIT12) ); + + usc_EnableMasterIrqBit(info); + usc_EnableInterrupts(info, IO_PIN); + usc_ClearIrqPendingBits(info, IO_PIN); + + usc_UnlatchIostatusBits(info, MISCSTATUS_TXC_LATCHED); + usc_EnableStatusIrqs(info, SICR_TXC_ACTIVE + SICR_TXC_INACTIVE); + + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + EndTime=100; + while( EndTime-- && !info->irq_occurred ) { + msleep_interruptible(10); + } + + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_reset(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + return info->irq_occurred; + +} /* end of mgsl_irq_test() */ + +/* mgsl_dma_test() + * + * Perform a DMA test of the 16C32. A small frame is + * transmitted via DMA from a transmit buffer to a receive buffer + * using single buffer DMA mode. + * + * Arguments: info pointer to device instance data + * Return Value: true if test passed, otherwise false + */ +static bool mgsl_dma_test( struct mgsl_struct *info ) +{ + unsigned short FifoLevel; + unsigned long phys_addr; + unsigned int FrameSize; + unsigned int i; + char *TmpPtr; + bool rc = true; + unsigned short status=0; + unsigned long EndTime; + unsigned long flags; + MGSL_PARAMS tmp_params; + + /* save current port options */ + memcpy(&tmp_params,&info->params,sizeof(MGSL_PARAMS)); + /* load default port options */ + memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS)); + +#define TESTFRAMESIZE 40 + + spin_lock_irqsave(&info->irq_spinlock,flags); + + /* setup 16C32 for SDLC DMA transfer mode */ + + usc_reset(info); + usc_set_sdlc_mode(info); + usc_enable_loopback(info,1); + + /* Reprogram the RDMR so that the 16C32 does NOT clear the count + * field of the buffer entry after fetching buffer address. This + * way we can detect a DMA failure for a DMA read (which should be + * non-destructive to system memory) before we try and write to + * memory (where a failure could corrupt system memory). + */ + + /* Receive DMA mode Register (RDMR) + * + * <15..14> 11 DMA mode = Linked List Buffer mode + * <13> 1 RSBinA/L = store Rx status Block in List entry + * <12> 0 1 = Clear count of List Entry after fetching + * <11..10> 00 Address mode = Increment + * <9> 1 Terminate Buffer on RxBound + * <8> 0 Bus Width = 16bits + * <7..0> ? status Bits (write as 0s) + * + * 1110 0010 0000 0000 = 0xe200 + */ + + usc_OutDmaReg( info, RDMR, 0xe200 ); + + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + + /* SETUP TRANSMIT AND RECEIVE DMA BUFFERS */ + + FrameSize = TESTFRAMESIZE; + + /* setup 1st transmit buffer entry: */ + /* with frame size and transmit control word */ + + info->tx_buffer_list[0].count = FrameSize; + info->tx_buffer_list[0].rcc = FrameSize; + info->tx_buffer_list[0].status = 0x4000; + + /* build a transmit frame in 1st transmit DMA buffer */ + + TmpPtr = info->tx_buffer_list[0].virt_addr; + for (i = 0; i < FrameSize; i++ ) + *TmpPtr++ = i; + + /* setup 1st receive buffer entry: */ + /* clear status, set max receive buffer size */ + + info->rx_buffer_list[0].status = 0; + info->rx_buffer_list[0].count = FrameSize + 4; + + /* zero out the 1st receive buffer */ + + memset( info->rx_buffer_list[0].virt_addr, 0, FrameSize + 4 ); + + /* Set count field of next buffer entries to prevent */ + /* 16C32 from using buffers after the 1st one. */ + + info->tx_buffer_list[1].count = 0; + info->rx_buffer_list[1].count = 0; + + + /***************************/ + /* Program 16C32 receiver. */ + /***************************/ + + spin_lock_irqsave(&info->irq_spinlock,flags); + + /* setup DMA transfers */ + usc_RTCmd( info, RTCmd_PurgeRxFifo ); + + /* program 16C32 receiver with physical address of 1st DMA buffer entry */ + phys_addr = info->rx_buffer_list[0].phys_entry; + usc_OutDmaReg( info, NRARL, (unsigned short)phys_addr ); + usc_OutDmaReg( info, NRARU, (unsigned short)(phys_addr >> 16) ); + + /* Clear the Rx DMA status bits (read RDMR) and start channel */ + usc_InDmaReg( info, RDMR ); + usc_DmaCmd( info, DmaCmd_InitRxChannel ); + + /* Enable Receiver (RMR <1..0> = 10) */ + usc_OutReg( info, RMR, (unsigned short)((usc_InReg(info, RMR) & 0xfffc) | 0x0002) ); + + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + + /*************************************************************/ + /* WAIT FOR RECEIVER TO DMA ALL PARAMETERS FROM BUFFER ENTRY */ + /*************************************************************/ + + /* Wait 100ms for interrupt. */ + EndTime = jiffies + msecs_to_jiffies(100); + + for(;;) { + if (time_after(jiffies, EndTime)) { + rc = false; + break; + } + + spin_lock_irqsave(&info->irq_spinlock,flags); + status = usc_InDmaReg( info, RDMR ); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + if ( !(status & BIT4) && (status & BIT5) ) { + /* INITG (BIT 4) is inactive (no entry read in progress) AND */ + /* BUSY (BIT 5) is active (channel still active). */ + /* This means the buffer entry read has completed. */ + break; + } + } + + + /******************************/ + /* Program 16C32 transmitter. */ + /******************************/ + + spin_lock_irqsave(&info->irq_spinlock,flags); + + /* Program the Transmit Character Length Register (TCLR) */ + /* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */ + + usc_OutReg( info, TCLR, (unsigned short)info->tx_buffer_list[0].count ); + usc_RTCmd( info, RTCmd_PurgeTxFifo ); + + /* Program the address of the 1st DMA Buffer Entry in linked list */ + + phys_addr = info->tx_buffer_list[0].phys_entry; + usc_OutDmaReg( info, NTARL, (unsigned short)phys_addr ); + usc_OutDmaReg( info, NTARU, (unsigned short)(phys_addr >> 16) ); + + /* unlatch Tx status bits, and start transmit channel. */ + + usc_OutReg( info, TCSR, (unsigned short)(( usc_InReg(info, TCSR) & 0x0f00) | 0xfa) ); + usc_DmaCmd( info, DmaCmd_InitTxChannel ); + + /* wait for DMA controller to fill transmit FIFO */ + + usc_TCmd( info, TCmd_SelectTicrTxFifostatus ); + + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + + /**********************************/ + /* WAIT FOR TRANSMIT FIFO TO FILL */ + /**********************************/ + + /* Wait 100ms */ + EndTime = jiffies + msecs_to_jiffies(100); + + for(;;) { + if (time_after(jiffies, EndTime)) { + rc = false; + break; + } + + spin_lock_irqsave(&info->irq_spinlock,flags); + FifoLevel = usc_InReg(info, TICR) >> 8; + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + if ( FifoLevel < 16 ) + break; + else + if ( FrameSize < 32 ) { + /* This frame is smaller than the entire transmit FIFO */ + /* so wait for the entire frame to be loaded. */ + if ( FifoLevel <= (32 - FrameSize) ) + break; + } + } + + + if ( rc ) + { + /* Enable 16C32 transmitter. */ + + spin_lock_irqsave(&info->irq_spinlock,flags); + + /* Transmit mode Register (TMR), <1..0> = 10, Enable Transmitter */ + usc_TCmd( info, TCmd_SendFrame ); + usc_OutReg( info, TMR, (unsigned short)((usc_InReg(info, TMR) & 0xfffc) | 0x0002) ); + + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + + /******************************/ + /* WAIT FOR TRANSMIT COMPLETE */ + /******************************/ + + /* Wait 100ms */ + EndTime = jiffies + msecs_to_jiffies(100); + + /* While timer not expired wait for transmit complete */ + + spin_lock_irqsave(&info->irq_spinlock,flags); + status = usc_InReg( info, TCSR ); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + while ( !(status & (BIT6 | BIT5 | BIT4 | BIT2 | BIT1)) ) { + if (time_after(jiffies, EndTime)) { + rc = false; + break; + } + + spin_lock_irqsave(&info->irq_spinlock,flags); + status = usc_InReg( info, TCSR ); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + } + } + + + if ( rc ){ + /* CHECK FOR TRANSMIT ERRORS */ + if ( status & (BIT5 | BIT1) ) + rc = false; + } + + if ( rc ) { + /* WAIT FOR RECEIVE COMPLETE */ + + /* Wait 100ms */ + EndTime = jiffies + msecs_to_jiffies(100); + + /* Wait for 16C32 to write receive status to buffer entry. */ + status=info->rx_buffer_list[0].status; + while ( status == 0 ) { + if (time_after(jiffies, EndTime)) { + rc = false; + break; + } + status=info->rx_buffer_list[0].status; + } + } + + + if ( rc ) { + /* CHECK FOR RECEIVE ERRORS */ + status = info->rx_buffer_list[0].status; + + if ( status & (BIT8 | BIT3 | BIT1) ) { + /* receive error has occurred */ + rc = false; + } else { + if ( memcmp( info->tx_buffer_list[0].virt_addr , + info->rx_buffer_list[0].virt_addr, FrameSize ) ){ + rc = false; + } + } + } + + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_reset( info ); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + /* restore current port options */ + memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS)); + + return rc; + +} /* end of mgsl_dma_test() */ + +/* mgsl_adapter_test() + * + * Perform the register, IRQ, and DMA tests for the 16C32. + * + * Arguments: info pointer to device instance data + * Return Value: 0 if success, otherwise -ENODEV + */ +static int mgsl_adapter_test( struct mgsl_struct *info ) +{ + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):Testing device %s\n", + __FILE__,__LINE__,info->device_name ); + + if ( !mgsl_register_test( info ) ) { + info->init_error = DiagStatus_AddressFailure; + printk( "%s(%d):Register test failure for device %s Addr=%04X\n", + __FILE__,__LINE__,info->device_name, (unsigned short)(info->io_base) ); + return -ENODEV; + } + + if ( !mgsl_irq_test( info ) ) { + info->init_error = DiagStatus_IrqFailure; + printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n", + __FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) ); + return -ENODEV; + } + + if ( !mgsl_dma_test( info ) ) { + info->init_error = DiagStatus_DmaFailure; + printk( "%s(%d):DMA test failure for device %s DMA=%d\n", + __FILE__,__LINE__,info->device_name, (unsigned short)(info->dma_level) ); + return -ENODEV; + } + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):device %s passed diagnostics\n", + __FILE__,__LINE__,info->device_name ); + + return 0; + +} /* end of mgsl_adapter_test() */ + +/* mgsl_memory_test() + * + * Test the shared memory on a PCI adapter. + * + * Arguments: info pointer to device instance data + * Return Value: true if test passed, otherwise false + */ +static bool mgsl_memory_test( struct mgsl_struct *info ) +{ + static unsigned long BitPatterns[] = + { 0x0, 0x55555555, 0xaaaaaaaa, 0x66666666, 0x99999999, 0xffffffff, 0x12345678 }; + unsigned long Patterncount = ARRAY_SIZE(BitPatterns); + unsigned long i; + unsigned long TestLimit = SHARED_MEM_ADDRESS_SIZE/sizeof(unsigned long); + unsigned long * TestAddr; + + TestAddr = (unsigned long *)info->memory_base; + + /* Test data lines with test pattern at one location. */ + + for ( i = 0 ; i < Patterncount ; i++ ) { + *TestAddr = BitPatterns[i]; + if ( *TestAddr != BitPatterns[i] ) + return false; + } + + /* Test address lines with incrementing pattern over */ + /* entire address range. */ + + for ( i = 0 ; i < TestLimit ; i++ ) { + *TestAddr = i * 4; + TestAddr++; + } + + TestAddr = (unsigned long *)info->memory_base; + + for ( i = 0 ; i < TestLimit ; i++ ) { + if ( *TestAddr != i * 4 ) + return false; + TestAddr++; + } + + memset( info->memory_base, 0, SHARED_MEM_ADDRESS_SIZE ); + + return true; + +} /* End Of mgsl_memory_test() */ + + +/* mgsl_load_pci_memory() + * + * Load a large block of data into the PCI shared memory. + * Use this instead of memcpy() or memmove() to move data + * into the PCI shared memory. + * + * Notes: + * + * This function prevents the PCI9050 interface chip from hogging + * the adapter local bus, which can starve the 16C32 by preventing + * 16C32 bus master cycles. + * + * The PCI9050 documentation says that the 9050 will always release + * control of the local bus after completing the current read + * or write operation. + * + * It appears that as long as the PCI9050 write FIFO is full, the + * PCI9050 treats all of the writes as a single burst transaction + * and will not release the bus. This causes DMA latency problems + * at high speeds when copying large data blocks to the shared + * memory. + * + * This function in effect, breaks the a large shared memory write + * into multiple transations by interleaving a shared memory read + * which will flush the write FIFO and 'complete' the write + * transation. This allows any pending DMA request to gain control + * of the local bus in a timely fasion. + * + * Arguments: + * + * TargetPtr pointer to target address in PCI shared memory + * SourcePtr pointer to source buffer for data + * count count in bytes of data to copy + * + * Return Value: None + */ +static void mgsl_load_pci_memory( char* TargetPtr, const char* SourcePtr, + unsigned short count ) +{ + /* 16 32-bit writes @ 60ns each = 960ns max latency on local bus */ +#define PCI_LOAD_INTERVAL 64 + + unsigned short Intervalcount = count / PCI_LOAD_INTERVAL; + unsigned short Index; + unsigned long Dummy; + + for ( Index = 0 ; Index < Intervalcount ; Index++ ) + { + memcpy(TargetPtr, SourcePtr, PCI_LOAD_INTERVAL); + Dummy = *((volatile unsigned long *)TargetPtr); + TargetPtr += PCI_LOAD_INTERVAL; + SourcePtr += PCI_LOAD_INTERVAL; + } + + memcpy( TargetPtr, SourcePtr, count % PCI_LOAD_INTERVAL ); + +} /* End Of mgsl_load_pci_memory() */ + +static void mgsl_trace_block(struct mgsl_struct *info,const char* data, int count, int xmit) +{ + int i; + int linecount; + if (xmit) + printk("%s tx data:\n",info->device_name); + else + printk("%s rx data:\n",info->device_name); + + while(count) { + if (count > 16) + linecount = 16; + else + linecount = count; + + for(i=0;i=040 && data[i]<=0176) + printk("%c",data[i]); + else + printk("."); + } + printk("\n"); + + data += linecount; + count -= linecount; + } +} /* end of mgsl_trace_block() */ + +/* mgsl_tx_timeout() + * + * called when HDLC frame times out + * update stats and do tx completion processing + * + * Arguments: context pointer to device instance data + * Return Value: None + */ +static void mgsl_tx_timeout(struct timer_list *t) +{ + struct mgsl_struct *info = from_timer(info, t, tx_timer); + unsigned long flags; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):mgsl_tx_timeout(%s)\n", + __FILE__,__LINE__,info->device_name); + if(info->tx_active && + (info->params.mode == MGSL_MODE_HDLC || + info->params.mode == MGSL_MODE_RAW) ) { + info->icount.txtimeout++; + } + spin_lock_irqsave(&info->irq_spinlock,flags); + info->tx_active = false; + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + + if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE ) + usc_loopmode_cancel_transmit( info ); + + spin_unlock_irqrestore(&info->irq_spinlock,flags); + +#if SYNCLINK_GENERIC_HDLC + if (info->netcount) + hdlcdev_tx_done(info); + else +#endif + mgsl_bh_transmit(info); + +} /* end of mgsl_tx_timeout() */ + +/* signal that there are no more frames to send, so that + * line is 'released' by echoing RxD to TxD when current + * transmission is complete (or immediately if no tx in progress). + */ +static int mgsl_loopmode_send_done( struct mgsl_struct * info ) +{ + unsigned long flags; + + spin_lock_irqsave(&info->irq_spinlock,flags); + if (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) { + if (info->tx_active) + info->loopmode_send_done_requested = true; + else + usc_loopmode_send_done(info); + } + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + return 0; +} + +/* release the line by echoing RxD to TxD + * upon completion of a transmit frame + */ +static void usc_loopmode_send_done( struct mgsl_struct * info ) +{ + info->loopmode_send_done_requested = false; + /* clear CMR:13 to 0 to start echoing RxData to TxData */ + info->cmr_value &= ~BIT13; + usc_OutReg(info, CMR, info->cmr_value); +} + +/* abort a transmit in progress while in HDLC LoopMode + */ +static void usc_loopmode_cancel_transmit( struct mgsl_struct * info ) +{ + /* reset tx dma channel and purge TxFifo */ + usc_RTCmd( info, RTCmd_PurgeTxFifo ); + usc_DmaCmd( info, DmaCmd_ResetTxChannel ); + usc_loopmode_send_done( info ); +} + +/* for HDLC/SDLC LoopMode, setting CMR:13 after the transmitter is enabled + * is an Insert Into Loop action. Upon receipt of a GoAhead sequence (RxAbort) + * we must clear CMR:13 to begin repeating TxData to RxData + */ +static void usc_loopmode_insert_request( struct mgsl_struct * info ) +{ + info->loopmode_insert_requested = true; + + /* enable RxAbort irq. On next RxAbort, clear CMR:13 to + * begin repeating TxData on RxData (complete insertion) + */ + usc_OutReg( info, RICR, + (usc_InReg( info, RICR ) | RXSTATUS_ABORT_RECEIVED ) ); + + /* set CMR:13 to insert into loop on next GoAhead (RxAbort) */ + info->cmr_value |= BIT13; + usc_OutReg(info, CMR, info->cmr_value); +} + +/* return 1 if station is inserted into the loop, otherwise 0 + */ +static int usc_loopmode_active( struct mgsl_struct * info) +{ + return usc_InReg( info, CCSR ) & BIT7 ? 1 : 0 ; +} + +#if SYNCLINK_GENERIC_HDLC + +/** + * hdlcdev_attach - called by generic HDLC layer when protocol selected (PPP, frame relay, etc.) + * @dev: pointer to network device structure + * @encoding: serial encoding setting + * @parity: FCS setting + * + * Set encoding and frame check sequence (FCS) options. + * + * Return: 0 if success, otherwise error code + */ +static int hdlcdev_attach(struct net_device *dev, unsigned short encoding, + unsigned short parity) +{ + struct mgsl_struct *info = dev_to_port(dev); + unsigned char new_encoding; + unsigned short new_crctype; + + /* return error if TTY interface open */ + if (info->port.count) + return -EBUSY; + + switch (encoding) + { + case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break; + case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break; + case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break; + case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break; + case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break; + default: return -EINVAL; + } + + switch (parity) + { + case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break; + case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break; + case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break; + default: return -EINVAL; + } + + info->params.encoding = new_encoding; + info->params.crc_type = new_crctype; + + /* if network interface up, reprogram hardware */ + if (info->netcount) + mgsl_program_hw(info); + + return 0; +} + +/** + * hdlcdev_xmit - called by generic HDLC layer to send a frame + * @skb: socket buffer containing HDLC frame + * @dev: pointer to network device structure + */ +static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb, + struct net_device *dev) +{ + struct mgsl_struct *info = dev_to_port(dev); + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name); + + /* stop sending until this frame completes */ + netif_stop_queue(dev); + + /* copy data to device buffers */ + info->xmit_cnt = skb->len; + mgsl_load_tx_dma_buffer(info, skb->data, skb->len); + + /* update network statistics */ + dev->stats.tx_packets++; + dev->stats.tx_bytes += skb->len; + + /* done with socket buffer, so free it */ + dev_kfree_skb(skb); + + /* save start time for transmit timeout detection */ + netif_trans_update(dev); + + /* start hardware transmitter if necessary */ + spin_lock_irqsave(&info->irq_spinlock,flags); + if (!info->tx_active) + usc_start_transmitter(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + return NETDEV_TX_OK; +} + +/** + * hdlcdev_open - called by network layer when interface enabled + * @dev: pointer to network device structure + * + * Claim resources and initialize hardware. + * + * Return: 0 if success, otherwise error code + */ +static int hdlcdev_open(struct net_device *dev) +{ + struct mgsl_struct *info = dev_to_port(dev); + int rc; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name); + + /* generic HDLC layer open processing */ + rc = hdlc_open(dev); + if (rc) + return rc; + + /* arbitrate between network and tty opens */ + spin_lock_irqsave(&info->netlock, flags); + if (info->port.count != 0 || info->netcount != 0) { + printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name); + spin_unlock_irqrestore(&info->netlock, flags); + return -EBUSY; + } + info->netcount=1; + spin_unlock_irqrestore(&info->netlock, flags); + + /* claim resources and init adapter */ + if ((rc = startup(info)) != 0) { + spin_lock_irqsave(&info->netlock, flags); + info->netcount=0; + spin_unlock_irqrestore(&info->netlock, flags); + return rc; + } + + /* assert RTS and DTR, apply hardware settings */ + info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR; + mgsl_program_hw(info); + + /* enable network layer transmit */ + netif_trans_update(dev); + netif_start_queue(dev); + + /* inform generic HDLC layer of current DCD status */ + spin_lock_irqsave(&info->irq_spinlock, flags); + usc_get_serial_signals(info); + spin_unlock_irqrestore(&info->irq_spinlock, flags); + if (info->serial_signals & SerialSignal_DCD) + netif_carrier_on(dev); + else + netif_carrier_off(dev); + return 0; +} + +/** + * hdlcdev_close - called by network layer when interface is disabled + * @dev: pointer to network device structure + * + * Shutdown hardware and release resources. + * + * Return: 0 if success, otherwise error code + */ +static int hdlcdev_close(struct net_device *dev) +{ + struct mgsl_struct *info = dev_to_port(dev); + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name); + + netif_stop_queue(dev); + + /* shutdown adapter and release resources */ + shutdown(info); + + hdlc_close(dev); + + spin_lock_irqsave(&info->netlock, flags); + info->netcount=0; + spin_unlock_irqrestore(&info->netlock, flags); + + return 0; +} + +/** + * hdlcdev_ioctl - called by network layer to process IOCTL call to network device + * @dev: pointer to network device structure + * @ifr: pointer to network interface request structure + * @cmd: IOCTL command code + * + * Return: 0 if success, otherwise error code + */ +static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + const size_t size = sizeof(sync_serial_settings); + sync_serial_settings new_line; + sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync; + struct mgsl_struct *info = dev_to_port(dev); + unsigned int flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name); + + /* return error if TTY interface open */ + if (info->port.count) + return -EBUSY; + + if (cmd != SIOCWANDEV) + return hdlc_ioctl(dev, ifr, cmd); + + switch(ifr->ifr_settings.type) { + case IF_GET_IFACE: /* return current sync_serial_settings */ + + ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL; + if (ifr->ifr_settings.size < size) { + ifr->ifr_settings.size = size; /* data size wanted */ + return -ENOBUFS; + } + + flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | + HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | + HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | + HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); + + memset(&new_line, 0, sizeof(new_line)); + switch (flags){ + case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break; + case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break; + case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break; + case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break; + default: new_line.clock_type = CLOCK_DEFAULT; + } + + new_line.clock_rate = info->params.clock_speed; + new_line.loopback = info->params.loopback ? 1:0; + + if (copy_to_user(line, &new_line, size)) + return -EFAULT; + return 0; + + case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */ + + if(!capable(CAP_NET_ADMIN)) + return -EPERM; + if (copy_from_user(&new_line, line, size)) + return -EFAULT; + + switch (new_line.clock_type) + { + case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break; + case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break; + case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break; + case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break; + case CLOCK_DEFAULT: flags = info->params.flags & + (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | + HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | + HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | + HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break; + default: return -EINVAL; + } + + if (new_line.loopback != 0 && new_line.loopback != 1) + return -EINVAL; + + info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | + HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | + HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | + HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); + info->params.flags |= flags; + + info->params.loopback = new_line.loopback; + + if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG)) + info->params.clock_speed = new_line.clock_rate; + else + info->params.clock_speed = 0; + + /* if network interface up, reprogram hardware */ + if (info->netcount) + mgsl_program_hw(info); + return 0; + + default: + return hdlc_ioctl(dev, ifr, cmd); + } +} + +/** + * hdlcdev_tx_timeout - called by network layer when transmit timeout is detected + * + * @dev: pointer to network device structure + */ +static void hdlcdev_tx_timeout(struct net_device *dev, unsigned int txqueue) +{ + struct mgsl_struct *info = dev_to_port(dev); + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("hdlcdev_tx_timeout(%s)\n",dev->name); + + dev->stats.tx_errors++; + dev->stats.tx_aborted_errors++; + + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_stop_transmitter(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + netif_wake_queue(dev); +} + +/** + * hdlcdev_tx_done - called by device driver when transmit completes + * @info: pointer to device instance information + * + * Reenable network layer transmit if stopped. + */ +static void hdlcdev_tx_done(struct mgsl_struct *info) +{ + if (netif_queue_stopped(info->netdev)) + netif_wake_queue(info->netdev); +} + +/** + * hdlcdev_rx - called by device driver when frame received + * @info: pointer to device instance information + * @buf: pointer to buffer contianing frame data + * @size: count of data bytes in buf + * + * Pass frame to network layer. + */ +static void hdlcdev_rx(struct mgsl_struct *info, char *buf, int size) +{ + struct sk_buff *skb = dev_alloc_skb(size); + struct net_device *dev = info->netdev; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("hdlcdev_rx(%s)\n", dev->name); + + if (skb == NULL) { + printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n", + dev->name); + dev->stats.rx_dropped++; + return; + } + + skb_put_data(skb, buf, size); + + skb->protocol = hdlc_type_trans(skb, dev); + + dev->stats.rx_packets++; + dev->stats.rx_bytes += size; + + netif_rx(skb); +} + +static const struct net_device_ops hdlcdev_ops = { + .ndo_open = hdlcdev_open, + .ndo_stop = hdlcdev_close, + .ndo_start_xmit = hdlc_start_xmit, + .ndo_do_ioctl = hdlcdev_ioctl, + .ndo_tx_timeout = hdlcdev_tx_timeout, +}; + +/** + * hdlcdev_init - called by device driver when adding device instance + * @info: pointer to device instance information + * + * Do generic HDLC initialization. + * + * Return: 0 if success, otherwise error code + */ +static int hdlcdev_init(struct mgsl_struct *info) +{ + int rc; + struct net_device *dev; + hdlc_device *hdlc; + + /* allocate and initialize network and HDLC layer objects */ + + dev = alloc_hdlcdev(info); + if (!dev) { + printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__); + return -ENOMEM; + } + + /* for network layer reporting purposes only */ + dev->base_addr = info->io_base; + dev->irq = info->irq_level; + dev->dma = info->dma_level; + + /* network layer callbacks and settings */ + dev->netdev_ops = &hdlcdev_ops; + dev->watchdog_timeo = 10 * HZ; + dev->tx_queue_len = 50; + + /* generic HDLC layer callbacks and settings */ + hdlc = dev_to_hdlc(dev); + hdlc->attach = hdlcdev_attach; + hdlc->xmit = hdlcdev_xmit; + + /* register objects with HDLC layer */ + rc = register_hdlc_device(dev); + if (rc) { + printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__); + free_netdev(dev); + return rc; + } + + info->netdev = dev; + return 0; +} + +/** + * hdlcdev_exit - called by device driver when removing device instance + * @info: pointer to device instance information + * + * Do generic HDLC cleanup. + */ +static void hdlcdev_exit(struct mgsl_struct *info) +{ + unregister_hdlc_device(info->netdev); + free_netdev(info->netdev); + info->netdev = NULL; +} + +#endif /* CONFIG_HDLC */ + + +static int synclink_init_one (struct pci_dev *dev, + const struct pci_device_id *ent) +{ + struct mgsl_struct *info; + + if (pci_enable_device(dev)) { + printk("error enabling pci device %p\n", dev); + return -EIO; + } + + info = mgsl_allocate_device(); + if (!info) { + printk("can't allocate device instance data.\n"); + return -EIO; + } + + /* Copy user configuration info to device instance data */ + + info->io_base = pci_resource_start(dev, 2); + info->irq_level = dev->irq; + info->phys_memory_base = pci_resource_start(dev, 3); + + /* Because veremap only works on page boundaries we must map + * a larger area than is actually implemented for the LCR + * memory range. We map a full page starting at the page boundary. + */ + info->phys_lcr_base = pci_resource_start(dev, 0); + info->lcr_offset = info->phys_lcr_base & (PAGE_SIZE-1); + info->phys_lcr_base &= ~(PAGE_SIZE-1); + + info->io_addr_size = 8; + info->irq_flags = IRQF_SHARED; + + if (dev->device == 0x0210) { + /* Version 1 PCI9030 based universal PCI adapter */ + info->misc_ctrl_value = 0x007c4080; + info->hw_version = 1; + } else { + /* Version 0 PCI9050 based 5V PCI adapter + * A PCI9050 bug prevents reading LCR registers if + * LCR base address bit 7 is set. Maintain shadow + * value so we can write to LCR misc control reg. + */ + info->misc_ctrl_value = 0x087e4546; + info->hw_version = 0; + } + + mgsl_add_device(info); + + return 0; +} + +static void synclink_remove_one (struct pci_dev *dev) +{ +} + diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c new file mode 100644 index 000000000..0569d5949 --- /dev/null +++ b/drivers/tty/synclink_gt.c @@ -0,0 +1,5076 @@ +// SPDX-License-Identifier: GPL-1.0+ +/* + * Device driver for Microgate SyncLink GT serial adapters. + * + * written by Paul Fulghum for Microgate Corporation + * paulkf@microgate.com + * + * Microgate and SyncLink are trademarks of Microgate Corporation + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* + * DEBUG OUTPUT DEFINITIONS + * + * uncomment lines below to enable specific types of debug output + * + * DBGINFO information - most verbose output + * DBGERR serious errors + * DBGBH bottom half service routine debugging + * DBGISR interrupt service routine debugging + * DBGDATA output receive and transmit data + * DBGTBUF output transmit DMA buffers and registers + * DBGRBUF output receive DMA buffers and registers + */ + +#define DBGINFO(fmt) if (debug_level >= DEBUG_LEVEL_INFO) printk fmt +#define DBGERR(fmt) if (debug_level >= DEBUG_LEVEL_ERROR) printk fmt +#define DBGBH(fmt) if (debug_level >= DEBUG_LEVEL_BH) printk fmt +#define DBGISR(fmt) if (debug_level >= DEBUG_LEVEL_ISR) printk fmt +#define DBGDATA(info, buf, size, label) if (debug_level >= DEBUG_LEVEL_DATA) trace_block((info), (buf), (size), (label)) +/*#define DBGTBUF(info) dump_tbufs(info)*/ +/*#define DBGRBUF(info) dump_rbufs(info)*/ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINK_GT_MODULE)) +#define SYNCLINK_GENERIC_HDLC 1 +#else +#define SYNCLINK_GENERIC_HDLC 0 +#endif + +/* + * module identification + */ +static char *driver_name = "SyncLink GT"; +static char *slgt_driver_name = "synclink_gt"; +static char *tty_dev_prefix = "ttySLG"; +MODULE_LICENSE("GPL"); +#define MGSL_MAGIC 0x5401 +#define MAX_DEVICES 32 + +static const struct pci_device_id pci_table[] = { + {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, + {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT2_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, + {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT4_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, + {PCI_VENDOR_ID_MICROGATE, SYNCLINK_AC_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, + {0,}, /* terminate list */ +}; +MODULE_DEVICE_TABLE(pci, pci_table); + +static int init_one(struct pci_dev *dev,const struct pci_device_id *ent); +static void remove_one(struct pci_dev *dev); +static struct pci_driver pci_driver = { + .name = "synclink_gt", + .id_table = pci_table, + .probe = init_one, + .remove = remove_one, +}; + +static bool pci_registered; + +/* + * module configuration and status + */ +static struct slgt_info *slgt_device_list; +static int slgt_device_count; + +static int ttymajor; +static int debug_level; +static int maxframe[MAX_DEVICES]; + +module_param(ttymajor, int, 0); +module_param(debug_level, int, 0); +module_param_array(maxframe, int, NULL, 0); + +MODULE_PARM_DESC(ttymajor, "TTY major device number override: 0=auto assigned"); +MODULE_PARM_DESC(debug_level, "Debug syslog output: 0=disabled, 1 to 5=increasing detail"); +MODULE_PARM_DESC(maxframe, "Maximum frame size used by device (4096 to 65535)"); + +/* + * tty support and callbacks + */ +static struct tty_driver *serial_driver; + +static void wait_until_sent(struct tty_struct *tty, int timeout); +static void flush_buffer(struct tty_struct *tty); +static void tx_release(struct tty_struct *tty); + +/* + * generic HDLC support + */ +#define dev_to_port(D) (dev_to_hdlc(D)->priv) + + +/* + * device specific structures, macros and functions + */ + +#define SLGT_MAX_PORTS 4 +#define SLGT_REG_SIZE 256 + +/* + * conditional wait facility + */ +struct cond_wait { + struct cond_wait *next; + wait_queue_head_t q; + wait_queue_entry_t wait; + unsigned int data; +}; +static void flush_cond_wait(struct cond_wait **head); + +/* + * DMA buffer descriptor and access macros + */ +struct slgt_desc +{ + __le16 count; + __le16 status; + __le32 pbuf; /* physical address of data buffer */ + __le32 next; /* physical address of next descriptor */ + + /* driver book keeping */ + char *buf; /* virtual address of data buffer */ + unsigned int pdesc; /* physical address of this descriptor */ + dma_addr_t buf_dma_addr; + unsigned short buf_count; +}; + +#define set_desc_buffer(a,b) (a).pbuf = cpu_to_le32((unsigned int)(b)) +#define set_desc_next(a,b) (a).next = cpu_to_le32((unsigned int)(b)) +#define set_desc_count(a,b)(a).count = cpu_to_le16((unsigned short)(b)) +#define set_desc_eof(a,b) (a).status = cpu_to_le16((b) ? (le16_to_cpu((a).status) | BIT0) : (le16_to_cpu((a).status) & ~BIT0)) +#define set_desc_status(a, b) (a).status = cpu_to_le16((unsigned short)(b)) +#define desc_count(a) (le16_to_cpu((a).count)) +#define desc_status(a) (le16_to_cpu((a).status)) +#define desc_complete(a) (le16_to_cpu((a).status) & BIT15) +#define desc_eof(a) (le16_to_cpu((a).status) & BIT2) +#define desc_crc_error(a) (le16_to_cpu((a).status) & BIT1) +#define desc_abort(a) (le16_to_cpu((a).status) & BIT0) +#define desc_residue(a) ((le16_to_cpu((a).status) & 0x38) >> 3) + +struct _input_signal_events { + int ri_up; + int ri_down; + int dsr_up; + int dsr_down; + int dcd_up; + int dcd_down; + int cts_up; + int cts_down; +}; + +/* + * device instance data structure + */ +struct slgt_info { + void *if_ptr; /* General purpose pointer (used by SPPP) */ + struct tty_port port; + + struct slgt_info *next_device; /* device list link */ + + int magic; + + char device_name[25]; + struct pci_dev *pdev; + + int port_count; /* count of ports on adapter */ + int adapter_num; /* adapter instance number */ + int port_num; /* port instance number */ + + /* array of pointers to port contexts on this adapter */ + struct slgt_info *port_array[SLGT_MAX_PORTS]; + + int line; /* tty line instance number */ + + struct mgsl_icount icount; + + int timeout; + int x_char; /* xon/xoff character */ + unsigned int read_status_mask; + unsigned int ignore_status_mask; + + wait_queue_head_t status_event_wait_q; + wait_queue_head_t event_wait_q; + struct timer_list tx_timer; + struct timer_list rx_timer; + + unsigned int gpio_present; + struct cond_wait *gpio_wait_q; + + spinlock_t lock; /* spinlock for synchronizing with ISR */ + + struct work_struct task; + u32 pending_bh; + bool bh_requested; + bool bh_running; + + int isr_overflow; + bool irq_requested; /* true if IRQ requested */ + bool irq_occurred; /* for diagnostics use */ + + /* device configuration */ + + unsigned int bus_type; + unsigned int irq_level; + unsigned long irq_flags; + + unsigned char __iomem * reg_addr; /* memory mapped registers address */ + u32 phys_reg_addr; + bool reg_addr_requested; + + MGSL_PARAMS params; /* communications parameters */ + u32 idle_mode; + u32 max_frame_size; /* as set by device config */ + + unsigned int rbuf_fill_level; + unsigned int rx_pio; + unsigned int if_mode; + unsigned int base_clock; + unsigned int xsync; + unsigned int xctrl; + + /* device status */ + + bool rx_enabled; + bool rx_restart; + + bool tx_enabled; + bool tx_active; + + unsigned char signals; /* serial signal states */ + int init_error; /* initialization error */ + + unsigned char *tx_buf; + int tx_count; + + char *flag_buf; + bool drop_rts_on_tx_done; + struct _input_signal_events input_signal_events; + + int dcd_chkcount; /* check counts to prevent */ + int cts_chkcount; /* too many IRQs if a signal */ + int dsr_chkcount; /* is floating */ + int ri_chkcount; + + char *bufs; /* virtual address of DMA buffer lists */ + dma_addr_t bufs_dma_addr; /* physical address of buffer descriptors */ + + unsigned int rbuf_count; + struct slgt_desc *rbufs; + unsigned int rbuf_current; + unsigned int rbuf_index; + unsigned int rbuf_fill_index; + unsigned short rbuf_fill_count; + + unsigned int tbuf_count; + struct slgt_desc *tbufs; + unsigned int tbuf_current; + unsigned int tbuf_start; + + unsigned char *tmp_rbuf; + unsigned int tmp_rbuf_count; + + /* SPPP/Cisco HDLC device parts */ + + int netcount; + spinlock_t netlock; +#if SYNCLINK_GENERIC_HDLC + struct net_device *netdev; +#endif + +}; + +static MGSL_PARAMS default_params = { + .mode = MGSL_MODE_HDLC, + .loopback = 0, + .flags = HDLC_FLAG_UNDERRUN_ABORT15, + .encoding = HDLC_ENCODING_NRZI_SPACE, + .clock_speed = 0, + .addr_filter = 0xff, + .crc_type = HDLC_CRC_16_CCITT, + .preamble_length = HDLC_PREAMBLE_LENGTH_8BITS, + .preamble = HDLC_PREAMBLE_PATTERN_NONE, + .data_rate = 9600, + .data_bits = 8, + .stop_bits = 1, + .parity = ASYNC_PARITY_NONE +}; + + +#define BH_RECEIVE 1 +#define BH_TRANSMIT 2 +#define BH_STATUS 4 +#define IO_PIN_SHUTDOWN_LIMIT 100 + +#define DMABUFSIZE 256 +#define DESC_LIST_SIZE 4096 + +#define MASK_PARITY BIT1 +#define MASK_FRAMING BIT0 +#define MASK_BREAK BIT14 +#define MASK_OVERRUN BIT4 + +#define GSR 0x00 /* global status */ +#define JCR 0x04 /* JTAG control */ +#define IODR 0x08 /* GPIO direction */ +#define IOER 0x0c /* GPIO interrupt enable */ +#define IOVR 0x10 /* GPIO value */ +#define IOSR 0x14 /* GPIO interrupt status */ +#define TDR 0x80 /* tx data */ +#define RDR 0x80 /* rx data */ +#define TCR 0x82 /* tx control */ +#define TIR 0x84 /* tx idle */ +#define TPR 0x85 /* tx preamble */ +#define RCR 0x86 /* rx control */ +#define VCR 0x88 /* V.24 control */ +#define CCR 0x89 /* clock control */ +#define BDR 0x8a /* baud divisor */ +#define SCR 0x8c /* serial control */ +#define SSR 0x8e /* serial status */ +#define RDCSR 0x90 /* rx DMA control/status */ +#define TDCSR 0x94 /* tx DMA control/status */ +#define RDDAR 0x98 /* rx DMA descriptor address */ +#define TDDAR 0x9c /* tx DMA descriptor address */ +#define XSR 0x40 /* extended sync pattern */ +#define XCR 0x44 /* extended control */ + +#define RXIDLE BIT14 +#define RXBREAK BIT14 +#define IRQ_TXDATA BIT13 +#define IRQ_TXIDLE BIT12 +#define IRQ_TXUNDER BIT11 /* HDLC */ +#define IRQ_RXDATA BIT10 +#define IRQ_RXIDLE BIT9 /* HDLC */ +#define IRQ_RXBREAK BIT9 /* async */ +#define IRQ_RXOVER BIT8 +#define IRQ_DSR BIT7 +#define IRQ_CTS BIT6 +#define IRQ_DCD BIT5 +#define IRQ_RI BIT4 +#define IRQ_ALL 0x3ff0 +#define IRQ_MASTER BIT0 + +#define slgt_irq_on(info, mask) \ + wr_reg16((info), SCR, (unsigned short)(rd_reg16((info), SCR) | (mask))) +#define slgt_irq_off(info, mask) \ + wr_reg16((info), SCR, (unsigned short)(rd_reg16((info), SCR) & ~(mask))) + +static __u8 rd_reg8(struct slgt_info *info, unsigned int addr); +static void wr_reg8(struct slgt_info *info, unsigned int addr, __u8 value); +static __u16 rd_reg16(struct slgt_info *info, unsigned int addr); +static void wr_reg16(struct slgt_info *info, unsigned int addr, __u16 value); +static __u32 rd_reg32(struct slgt_info *info, unsigned int addr); +static void wr_reg32(struct slgt_info *info, unsigned int addr, __u32 value); + +static void msc_set_vcr(struct slgt_info *info); + +static int startup(struct slgt_info *info); +static int block_til_ready(struct tty_struct *tty, struct file * filp,struct slgt_info *info); +static void shutdown(struct slgt_info *info); +static void program_hw(struct slgt_info *info); +static void change_params(struct slgt_info *info); + +static int adapter_test(struct slgt_info *info); + +static void reset_port(struct slgt_info *info); +static void async_mode(struct slgt_info *info); +static void sync_mode(struct slgt_info *info); + +static void rx_stop(struct slgt_info *info); +static void rx_start(struct slgt_info *info); +static void reset_rbufs(struct slgt_info *info); +static void free_rbufs(struct slgt_info *info, unsigned int first, unsigned int last); +static bool rx_get_frame(struct slgt_info *info); +static bool rx_get_buf(struct slgt_info *info); + +static void tx_start(struct slgt_info *info); +static void tx_stop(struct slgt_info *info); +static void tx_set_idle(struct slgt_info *info); +static unsigned int tbuf_bytes(struct slgt_info *info); +static void reset_tbufs(struct slgt_info *info); +static void tdma_reset(struct slgt_info *info); +static bool tx_load(struct slgt_info *info, const char *buf, unsigned int count); + +static void get_gtsignals(struct slgt_info *info); +static void set_gtsignals(struct slgt_info *info); +static void set_rate(struct slgt_info *info, u32 data_rate); + +static void bh_transmit(struct slgt_info *info); +static void isr_txeom(struct slgt_info *info, unsigned short status); + +static void tx_timeout(struct timer_list *t); +static void rx_timeout(struct timer_list *t); + +/* + * ioctl handlers + */ +static int get_stats(struct slgt_info *info, struct mgsl_icount __user *user_icount); +static int get_params(struct slgt_info *info, MGSL_PARAMS __user *params); +static int set_params(struct slgt_info *info, MGSL_PARAMS __user *params); +static int get_txidle(struct slgt_info *info, int __user *idle_mode); +static int set_txidle(struct slgt_info *info, int idle_mode); +static int tx_enable(struct slgt_info *info, int enable); +static int tx_abort(struct slgt_info *info); +static int rx_enable(struct slgt_info *info, int enable); +static int modem_input_wait(struct slgt_info *info,int arg); +static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr); +static int get_interface(struct slgt_info *info, int __user *if_mode); +static int set_interface(struct slgt_info *info, int if_mode); +static int set_gpio(struct slgt_info *info, struct gpio_desc __user *gpio); +static int get_gpio(struct slgt_info *info, struct gpio_desc __user *gpio); +static int wait_gpio(struct slgt_info *info, struct gpio_desc __user *gpio); +static int get_xsync(struct slgt_info *info, int __user *if_mode); +static int set_xsync(struct slgt_info *info, int if_mode); +static int get_xctrl(struct slgt_info *info, int __user *if_mode); +static int set_xctrl(struct slgt_info *info, int if_mode); + +/* + * driver functions + */ +static void release_resources(struct slgt_info *info); + +/* + * DEBUG OUTPUT CODE + */ +#ifndef DBGINFO +#define DBGINFO(fmt) +#endif +#ifndef DBGERR +#define DBGERR(fmt) +#endif +#ifndef DBGBH +#define DBGBH(fmt) +#endif +#ifndef DBGISR +#define DBGISR(fmt) +#endif + +#ifdef DBGDATA +static void trace_block(struct slgt_info *info, const char *data, int count, const char *label) +{ + int i; + int linecount; + printk("%s %s data:\n",info->device_name, label); + while(count) { + linecount = (count > 16) ? 16 : count; + for(i=0; i < linecount; i++) + printk("%02X ",(unsigned char)data[i]); + for(;i<17;i++) + printk(" "); + for(i=0;i=040 && data[i]<=0176) + printk("%c",data[i]); + else + printk("."); + } + printk("\n"); + data += linecount; + count -= linecount; + } +} +#else +#define DBGDATA(info, buf, size, label) +#endif + +#ifdef DBGTBUF +static void dump_tbufs(struct slgt_info *info) +{ + int i; + printk("tbuf_current=%d\n", info->tbuf_current); + for (i=0 ; i < info->tbuf_count ; i++) { + printk("%d: count=%04X status=%04X\n", + i, le16_to_cpu(info->tbufs[i].count), le16_to_cpu(info->tbufs[i].status)); + } +} +#else +#define DBGTBUF(info) +#endif + +#ifdef DBGRBUF +static void dump_rbufs(struct slgt_info *info) +{ + int i; + printk("rbuf_current=%d\n", info->rbuf_current); + for (i=0 ; i < info->rbuf_count ; i++) { + printk("%d: count=%04X status=%04X\n", + i, le16_to_cpu(info->rbufs[i].count), le16_to_cpu(info->rbufs[i].status)); + } +} +#else +#define DBGRBUF(info) +#endif + +static inline int sanity_check(struct slgt_info *info, char *devname, const char *name) +{ +#ifdef SANITY_CHECK + if (!info) { + printk("null struct slgt_info for (%s) in %s\n", devname, name); + return 1; + } + if (info->magic != MGSL_MAGIC) { + printk("bad magic number struct slgt_info (%s) in %s\n", devname, name); + return 1; + } +#else + if (!info) + return 1; +#endif + return 0; +} + +/** + * line discipline callback wrappers + * + * The wrappers maintain line discipline references + * while calling into the line discipline. + * + * ldisc_receive_buf - pass receive data to line discipline + */ +static void ldisc_receive_buf(struct tty_struct *tty, + const __u8 *data, char *flags, int count) +{ + struct tty_ldisc *ld; + if (!tty) + return; + ld = tty_ldisc_ref(tty); + if (ld) { + if (ld->ops->receive_buf) + ld->ops->receive_buf(tty, data, flags, count); + tty_ldisc_deref(ld); + } +} + +/* tty callbacks */ + +static int open(struct tty_struct *tty, struct file *filp) +{ + struct slgt_info *info; + int retval, line; + unsigned long flags; + + line = tty->index; + if (line >= slgt_device_count) { + DBGERR(("%s: open with invalid line #%d.\n", driver_name, line)); + return -ENODEV; + } + + info = slgt_device_list; + while(info && info->line != line) + info = info->next_device; + if (sanity_check(info, tty->name, "open")) + return -ENODEV; + if (info->init_error) { + DBGERR(("%s init error=%d\n", info->device_name, info->init_error)); + return -ENODEV; + } + + tty->driver_data = info; + info->port.tty = tty; + + DBGINFO(("%s open, old ref count = %d\n", info->device_name, info->port.count)); + + mutex_lock(&info->port.mutex); + info->port.low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0; + + spin_lock_irqsave(&info->netlock, flags); + if (info->netcount) { + retval = -EBUSY; + spin_unlock_irqrestore(&info->netlock, flags); + mutex_unlock(&info->port.mutex); + goto cleanup; + } + info->port.count++; + spin_unlock_irqrestore(&info->netlock, flags); + + if (info->port.count == 1) { + /* 1st open on this device, init hardware */ + retval = startup(info); + if (retval < 0) { + mutex_unlock(&info->port.mutex); + goto cleanup; + } + } + mutex_unlock(&info->port.mutex); + retval = block_til_ready(tty, filp, info); + if (retval) { + DBGINFO(("%s block_til_ready rc=%d\n", info->device_name, retval)); + goto cleanup; + } + + retval = 0; + +cleanup: + if (retval) { + if (tty->count == 1) + info->port.tty = NULL; /* tty layer will release tty struct */ + if(info->port.count) + info->port.count--; + } + + DBGINFO(("%s open rc=%d\n", info->device_name, retval)); + return retval; +} + +static void close(struct tty_struct *tty, struct file *filp) +{ + struct slgt_info *info = tty->driver_data; + + if (sanity_check(info, tty->name, "close")) + return; + DBGINFO(("%s close entry, count=%d\n", info->device_name, info->port.count)); + + if (tty_port_close_start(&info->port, tty, filp) == 0) + goto cleanup; + + mutex_lock(&info->port.mutex); + if (tty_port_initialized(&info->port)) + wait_until_sent(tty, info->timeout); + flush_buffer(tty); + tty_ldisc_flush(tty); + + shutdown(info); + mutex_unlock(&info->port.mutex); + + tty_port_close_end(&info->port, tty); + info->port.tty = NULL; +cleanup: + DBGINFO(("%s close exit, count=%d\n", tty->driver->name, info->port.count)); +} + +static void hangup(struct tty_struct *tty) +{ + struct slgt_info *info = tty->driver_data; + unsigned long flags; + + if (sanity_check(info, tty->name, "hangup")) + return; + DBGINFO(("%s hangup\n", info->device_name)); + + flush_buffer(tty); + + mutex_lock(&info->port.mutex); + shutdown(info); + + spin_lock_irqsave(&info->port.lock, flags); + info->port.count = 0; + info->port.tty = NULL; + spin_unlock_irqrestore(&info->port.lock, flags); + tty_port_set_active(&info->port, 0); + mutex_unlock(&info->port.mutex); + + wake_up_interruptible(&info->port.open_wait); +} + +static void set_termios(struct tty_struct *tty, struct ktermios *old_termios) +{ + struct slgt_info *info = tty->driver_data; + unsigned long flags; + + DBGINFO(("%s set_termios\n", tty->driver->name)); + + change_params(info); + + /* Handle transition to B0 status */ + if ((old_termios->c_cflag & CBAUD) && !C_BAUD(tty)) { + info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR); + spin_lock_irqsave(&info->lock,flags); + set_gtsignals(info); + spin_unlock_irqrestore(&info->lock,flags); + } + + /* Handle transition away from B0 status */ + if (!(old_termios->c_cflag & CBAUD) && C_BAUD(tty)) { + info->signals |= SerialSignal_DTR; + if (!C_CRTSCTS(tty) || !tty_throttled(tty)) + info->signals |= SerialSignal_RTS; + spin_lock_irqsave(&info->lock,flags); + set_gtsignals(info); + spin_unlock_irqrestore(&info->lock,flags); + } + + /* Handle turning off CRTSCTS */ + if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty)) { + tty->hw_stopped = 0; + tx_release(tty); + } +} + +static void update_tx_timer(struct slgt_info *info) +{ + /* + * use worst case speed of 1200bps to calculate transmit timeout + * based on data in buffers (tbuf_bytes) and FIFO (128 bytes) + */ + if (info->params.mode == MGSL_MODE_HDLC) { + int timeout = (tbuf_bytes(info) * 7) + 1000; + mod_timer(&info->tx_timer, jiffies + msecs_to_jiffies(timeout)); + } +} + +static int write(struct tty_struct *tty, + const unsigned char *buf, int count) +{ + int ret = 0; + struct slgt_info *info = tty->driver_data; + unsigned long flags; + + if (sanity_check(info, tty->name, "write")) + return -EIO; + + DBGINFO(("%s write count=%d\n", info->device_name, count)); + + if (!info->tx_buf || (count > info->max_frame_size)) + return -EIO; + + if (!count || tty->stopped || tty->hw_stopped) + return 0; + + spin_lock_irqsave(&info->lock, flags); + + if (info->tx_count) { + /* send accumulated data from send_char() */ + if (!tx_load(info, info->tx_buf, info->tx_count)) + goto cleanup; + info->tx_count = 0; + } + + if (tx_load(info, buf, count)) + ret = count; + +cleanup: + spin_unlock_irqrestore(&info->lock, flags); + DBGINFO(("%s write rc=%d\n", info->device_name, ret)); + return ret; +} + +static int put_char(struct tty_struct *tty, unsigned char ch) +{ + struct slgt_info *info = tty->driver_data; + unsigned long flags; + int ret = 0; + + if (sanity_check(info, tty->name, "put_char")) + return 0; + DBGINFO(("%s put_char(%d)\n", info->device_name, ch)); + if (!info->tx_buf) + return 0; + spin_lock_irqsave(&info->lock,flags); + if (info->tx_count < info->max_frame_size) { + info->tx_buf[info->tx_count++] = ch; + ret = 1; + } + spin_unlock_irqrestore(&info->lock,flags); + return ret; +} + +static void send_xchar(struct tty_struct *tty, char ch) +{ + struct slgt_info *info = tty->driver_data; + unsigned long flags; + + if (sanity_check(info, tty->name, "send_xchar")) + return; + DBGINFO(("%s send_xchar(%d)\n", info->device_name, ch)); + info->x_char = ch; + if (ch) { + spin_lock_irqsave(&info->lock,flags); + if (!info->tx_enabled) + tx_start(info); + spin_unlock_irqrestore(&info->lock,flags); + } +} + +static void wait_until_sent(struct tty_struct *tty, int timeout) +{ + struct slgt_info *info = tty->driver_data; + unsigned long orig_jiffies, char_time; + + if (!info ) + return; + if (sanity_check(info, tty->name, "wait_until_sent")) + return; + DBGINFO(("%s wait_until_sent entry\n", info->device_name)); + if (!tty_port_initialized(&info->port)) + goto exit; + + orig_jiffies = jiffies; + + /* Set check interval to 1/5 of estimated time to + * send a character, and make it at least 1. The check + * interval should also be less than the timeout. + * Note: use tight timings here to satisfy the NIST-PCTS. + */ + + if (info->params.data_rate) { + char_time = info->timeout/(32 * 5); + if (!char_time) + char_time++; + } else + char_time = 1; + + if (timeout) + char_time = min_t(unsigned long, char_time, timeout); + + while (info->tx_active) { + msleep_interruptible(jiffies_to_msecs(char_time)); + if (signal_pending(current)) + break; + if (timeout && time_after(jiffies, orig_jiffies + timeout)) + break; + } +exit: + DBGINFO(("%s wait_until_sent exit\n", info->device_name)); +} + +static int write_room(struct tty_struct *tty) +{ + struct slgt_info *info = tty->driver_data; + int ret; + + if (sanity_check(info, tty->name, "write_room")) + return 0; + ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE; + DBGINFO(("%s write_room=%d\n", info->device_name, ret)); + return ret; +} + +static void flush_chars(struct tty_struct *tty) +{ + struct slgt_info *info = tty->driver_data; + unsigned long flags; + + if (sanity_check(info, tty->name, "flush_chars")) + return; + DBGINFO(("%s flush_chars entry tx_count=%d\n", info->device_name, info->tx_count)); + + if (info->tx_count <= 0 || tty->stopped || + tty->hw_stopped || !info->tx_buf) + return; + + DBGINFO(("%s flush_chars start transmit\n", info->device_name)); + + spin_lock_irqsave(&info->lock,flags); + if (info->tx_count && tx_load(info, info->tx_buf, info->tx_count)) + info->tx_count = 0; + spin_unlock_irqrestore(&info->lock,flags); +} + +static void flush_buffer(struct tty_struct *tty) +{ + struct slgt_info *info = tty->driver_data; + unsigned long flags; + + if (sanity_check(info, tty->name, "flush_buffer")) + return; + DBGINFO(("%s flush_buffer\n", info->device_name)); + + spin_lock_irqsave(&info->lock, flags); + info->tx_count = 0; + spin_unlock_irqrestore(&info->lock, flags); + + tty_wakeup(tty); +} + +/* + * throttle (stop) transmitter + */ +static void tx_hold(struct tty_struct *tty) +{ + struct slgt_info *info = tty->driver_data; + unsigned long flags; + + if (sanity_check(info, tty->name, "tx_hold")) + return; + DBGINFO(("%s tx_hold\n", info->device_name)); + spin_lock_irqsave(&info->lock,flags); + if (info->tx_enabled && info->params.mode == MGSL_MODE_ASYNC) + tx_stop(info); + spin_unlock_irqrestore(&info->lock,flags); +} + +/* + * release (start) transmitter + */ +static void tx_release(struct tty_struct *tty) +{ + struct slgt_info *info = tty->driver_data; + unsigned long flags; + + if (sanity_check(info, tty->name, "tx_release")) + return; + DBGINFO(("%s tx_release\n", info->device_name)); + spin_lock_irqsave(&info->lock, flags); + if (info->tx_count && tx_load(info, info->tx_buf, info->tx_count)) + info->tx_count = 0; + spin_unlock_irqrestore(&info->lock, flags); +} + +/* + * Service an IOCTL request + * + * Arguments + * + * tty pointer to tty instance data + * cmd IOCTL command code + * arg command argument/context + * + * Return 0 if success, otherwise error code + */ +static int ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct slgt_info *info = tty->driver_data; + void __user *argp = (void __user *)arg; + int ret; + + if (sanity_check(info, tty->name, "ioctl")) + return -ENODEV; + DBGINFO(("%s ioctl() cmd=%08X\n", info->device_name, cmd)); + + if (cmd != TIOCMIWAIT) { + if (tty_io_error(tty)) + return -EIO; + } + + switch (cmd) { + case MGSL_IOCWAITEVENT: + return wait_mgsl_event(info, argp); + case TIOCMIWAIT: + return modem_input_wait(info,(int)arg); + case MGSL_IOCSGPIO: + return set_gpio(info, argp); + case MGSL_IOCGGPIO: + return get_gpio(info, argp); + case MGSL_IOCWAITGPIO: + return wait_gpio(info, argp); + case MGSL_IOCGXSYNC: + return get_xsync(info, argp); + case MGSL_IOCSXSYNC: + return set_xsync(info, (int)arg); + case MGSL_IOCGXCTRL: + return get_xctrl(info, argp); + case MGSL_IOCSXCTRL: + return set_xctrl(info, (int)arg); + } + mutex_lock(&info->port.mutex); + switch (cmd) { + case MGSL_IOCGPARAMS: + ret = get_params(info, argp); + break; + case MGSL_IOCSPARAMS: + ret = set_params(info, argp); + break; + case MGSL_IOCGTXIDLE: + ret = get_txidle(info, argp); + break; + case MGSL_IOCSTXIDLE: + ret = set_txidle(info, (int)arg); + break; + case MGSL_IOCTXENABLE: + ret = tx_enable(info, (int)arg); + break; + case MGSL_IOCRXENABLE: + ret = rx_enable(info, (int)arg); + break; + case MGSL_IOCTXABORT: + ret = tx_abort(info); + break; + case MGSL_IOCGSTATS: + ret = get_stats(info, argp); + break; + case MGSL_IOCGIF: + ret = get_interface(info, argp); + break; + case MGSL_IOCSIF: + ret = set_interface(info,(int)arg); + break; + default: + ret = -ENOIOCTLCMD; + } + mutex_unlock(&info->port.mutex); + return ret; +} + +static int get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount) + +{ + struct slgt_info *info = tty->driver_data; + struct mgsl_icount cnow; /* kernel counter temps */ + unsigned long flags; + + spin_lock_irqsave(&info->lock,flags); + cnow = info->icount; + spin_unlock_irqrestore(&info->lock,flags); + + icount->cts = cnow.cts; + icount->dsr = cnow.dsr; + icount->rng = cnow.rng; + icount->dcd = cnow.dcd; + icount->rx = cnow.rx; + icount->tx = cnow.tx; + icount->frame = cnow.frame; + icount->overrun = cnow.overrun; + icount->parity = cnow.parity; + icount->brk = cnow.brk; + icount->buf_overrun = cnow.buf_overrun; + + return 0; +} + +/* + * support for 32 bit ioctl calls on 64 bit systems + */ +#ifdef CONFIG_COMPAT +static long get_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *user_params) +{ + struct MGSL_PARAMS32 tmp_params; + + DBGINFO(("%s get_params32\n", info->device_name)); + memset(&tmp_params, 0, sizeof(tmp_params)); + tmp_params.mode = (compat_ulong_t)info->params.mode; + tmp_params.loopback = info->params.loopback; + tmp_params.flags = info->params.flags; + tmp_params.encoding = info->params.encoding; + tmp_params.clock_speed = (compat_ulong_t)info->params.clock_speed; + tmp_params.addr_filter = info->params.addr_filter; + tmp_params.crc_type = info->params.crc_type; + tmp_params.preamble_length = info->params.preamble_length; + tmp_params.preamble = info->params.preamble; + tmp_params.data_rate = (compat_ulong_t)info->params.data_rate; + tmp_params.data_bits = info->params.data_bits; + tmp_params.stop_bits = info->params.stop_bits; + tmp_params.parity = info->params.parity; + if (copy_to_user(user_params, &tmp_params, sizeof(struct MGSL_PARAMS32))) + return -EFAULT; + return 0; +} + +static long set_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *new_params) +{ + struct MGSL_PARAMS32 tmp_params; + + DBGINFO(("%s set_params32\n", info->device_name)); + if (copy_from_user(&tmp_params, new_params, sizeof(struct MGSL_PARAMS32))) + return -EFAULT; + + spin_lock(&info->lock); + if (tmp_params.mode == MGSL_MODE_BASE_CLOCK) { + info->base_clock = tmp_params.clock_speed; + } else { + info->params.mode = tmp_params.mode; + info->params.loopback = tmp_params.loopback; + info->params.flags = tmp_params.flags; + info->params.encoding = tmp_params.encoding; + info->params.clock_speed = tmp_params.clock_speed; + info->params.addr_filter = tmp_params.addr_filter; + info->params.crc_type = tmp_params.crc_type; + info->params.preamble_length = tmp_params.preamble_length; + info->params.preamble = tmp_params.preamble; + info->params.data_rate = tmp_params.data_rate; + info->params.data_bits = tmp_params.data_bits; + info->params.stop_bits = tmp_params.stop_bits; + info->params.parity = tmp_params.parity; + } + spin_unlock(&info->lock); + + program_hw(info); + + return 0; +} + +static long slgt_compat_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct slgt_info *info = tty->driver_data; + int rc; + + if (sanity_check(info, tty->name, "compat_ioctl")) + return -ENODEV; + DBGINFO(("%s compat_ioctl() cmd=%08X\n", info->device_name, cmd)); + + switch (cmd) { + case MGSL_IOCSPARAMS32: + rc = set_params32(info, compat_ptr(arg)); + break; + + case MGSL_IOCGPARAMS32: + rc = get_params32(info, compat_ptr(arg)); + break; + + case MGSL_IOCGPARAMS: + case MGSL_IOCSPARAMS: + case MGSL_IOCGTXIDLE: + case MGSL_IOCGSTATS: + case MGSL_IOCWAITEVENT: + case MGSL_IOCGIF: + case MGSL_IOCSGPIO: + case MGSL_IOCGGPIO: + case MGSL_IOCWAITGPIO: + case MGSL_IOCGXSYNC: + case MGSL_IOCGXCTRL: + rc = ioctl(tty, cmd, (unsigned long)compat_ptr(arg)); + break; + default: + rc = ioctl(tty, cmd, arg); + } + DBGINFO(("%s compat_ioctl() cmd=%08X rc=%d\n", info->device_name, cmd, rc)); + return rc; +} +#else +#define slgt_compat_ioctl NULL +#endif /* ifdef CONFIG_COMPAT */ + +/* + * proc fs support + */ +static inline void line_info(struct seq_file *m, struct slgt_info *info) +{ + char stat_buf[30]; + unsigned long flags; + + seq_printf(m, "%s: IO=%08X IRQ=%d MaxFrameSize=%u\n", + info->device_name, info->phys_reg_addr, + info->irq_level, info->max_frame_size); + + /* output current serial signal states */ + spin_lock_irqsave(&info->lock,flags); + get_gtsignals(info); + spin_unlock_irqrestore(&info->lock,flags); + + stat_buf[0] = 0; + stat_buf[1] = 0; + if (info->signals & SerialSignal_RTS) + strcat(stat_buf, "|RTS"); + if (info->signals & SerialSignal_CTS) + strcat(stat_buf, "|CTS"); + if (info->signals & SerialSignal_DTR) + strcat(stat_buf, "|DTR"); + if (info->signals & SerialSignal_DSR) + strcat(stat_buf, "|DSR"); + if (info->signals & SerialSignal_DCD) + strcat(stat_buf, "|CD"); + if (info->signals & SerialSignal_RI) + strcat(stat_buf, "|RI"); + + if (info->params.mode != MGSL_MODE_ASYNC) { + seq_printf(m, "\tHDLC txok:%d rxok:%d", + info->icount.txok, info->icount.rxok); + if (info->icount.txunder) + seq_printf(m, " txunder:%d", info->icount.txunder); + if (info->icount.txabort) + seq_printf(m, " txabort:%d", info->icount.txabort); + if (info->icount.rxshort) + seq_printf(m, " rxshort:%d", info->icount.rxshort); + if (info->icount.rxlong) + seq_printf(m, " rxlong:%d", info->icount.rxlong); + if (info->icount.rxover) + seq_printf(m, " rxover:%d", info->icount.rxover); + if (info->icount.rxcrc) + seq_printf(m, " rxcrc:%d", info->icount.rxcrc); + } else { + seq_printf(m, "\tASYNC tx:%d rx:%d", + info->icount.tx, info->icount.rx); + if (info->icount.frame) + seq_printf(m, " fe:%d", info->icount.frame); + if (info->icount.parity) + seq_printf(m, " pe:%d", info->icount.parity); + if (info->icount.brk) + seq_printf(m, " brk:%d", info->icount.brk); + if (info->icount.overrun) + seq_printf(m, " oe:%d", info->icount.overrun); + } + + /* Append serial signal status to end */ + seq_printf(m, " %s\n", stat_buf+1); + + seq_printf(m, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n", + info->tx_active,info->bh_requested,info->bh_running, + info->pending_bh); +} + +/* Called to print information about devices + */ +static int synclink_gt_proc_show(struct seq_file *m, void *v) +{ + struct slgt_info *info; + + seq_puts(m, "synclink_gt driver\n"); + + info = slgt_device_list; + while( info ) { + line_info(m, info); + info = info->next_device; + } + return 0; +} + +/* + * return count of bytes in transmit buffer + */ +static int chars_in_buffer(struct tty_struct *tty) +{ + struct slgt_info *info = tty->driver_data; + int count; + if (sanity_check(info, tty->name, "chars_in_buffer")) + return 0; + count = tbuf_bytes(info); + DBGINFO(("%s chars_in_buffer()=%d\n", info->device_name, count)); + return count; +} + +/* + * signal remote device to throttle send data (our receive data) + */ +static void throttle(struct tty_struct * tty) +{ + struct slgt_info *info = tty->driver_data; + unsigned long flags; + + if (sanity_check(info, tty->name, "throttle")) + return; + DBGINFO(("%s throttle\n", info->device_name)); + if (I_IXOFF(tty)) + send_xchar(tty, STOP_CHAR(tty)); + if (C_CRTSCTS(tty)) { + spin_lock_irqsave(&info->lock,flags); + info->signals &= ~SerialSignal_RTS; + set_gtsignals(info); + spin_unlock_irqrestore(&info->lock,flags); + } +} + +/* + * signal remote device to stop throttling send data (our receive data) + */ +static void unthrottle(struct tty_struct * tty) +{ + struct slgt_info *info = tty->driver_data; + unsigned long flags; + + if (sanity_check(info, tty->name, "unthrottle")) + return; + DBGINFO(("%s unthrottle\n", info->device_name)); + if (I_IXOFF(tty)) { + if (info->x_char) + info->x_char = 0; + else + send_xchar(tty, START_CHAR(tty)); + } + if (C_CRTSCTS(tty)) { + spin_lock_irqsave(&info->lock,flags); + info->signals |= SerialSignal_RTS; + set_gtsignals(info); + spin_unlock_irqrestore(&info->lock,flags); + } +} + +/* + * set or clear transmit break condition + * break_state -1=set break condition, 0=clear + */ +static int set_break(struct tty_struct *tty, int break_state) +{ + struct slgt_info *info = tty->driver_data; + unsigned short value; + unsigned long flags; + + if (sanity_check(info, tty->name, "set_break")) + return -EINVAL; + DBGINFO(("%s set_break(%d)\n", info->device_name, break_state)); + + spin_lock_irqsave(&info->lock,flags); + value = rd_reg16(info, TCR); + if (break_state == -1) + value |= BIT6; + else + value &= ~BIT6; + wr_reg16(info, TCR, value); + spin_unlock_irqrestore(&info->lock,flags); + return 0; +} + +#if SYNCLINK_GENERIC_HDLC + +/** + * hdlcdev_attach - called by generic HDLC layer when protocol selected (PPP, frame relay, etc.) + * @dev: pointer to network device structure + * @encoding: serial encoding setting + * @parity: FCS setting + * + * Set encoding and frame check sequence (FCS) options. + * + * Return: 0 if success, otherwise error code + */ +static int hdlcdev_attach(struct net_device *dev, unsigned short encoding, + unsigned short parity) +{ + struct slgt_info *info = dev_to_port(dev); + unsigned char new_encoding; + unsigned short new_crctype; + + /* return error if TTY interface open */ + if (info->port.count) + return -EBUSY; + + DBGINFO(("%s hdlcdev_attach\n", info->device_name)); + + switch (encoding) + { + case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break; + case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break; + case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break; + case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break; + case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break; + default: return -EINVAL; + } + + switch (parity) + { + case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break; + case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break; + case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break; + default: return -EINVAL; + } + + info->params.encoding = new_encoding; + info->params.crc_type = new_crctype; + + /* if network interface up, reprogram hardware */ + if (info->netcount) + program_hw(info); + + return 0; +} + +/** + * hdlcdev_xmit - called by generic HDLC layer to send a frame + * @skb: socket buffer containing HDLC frame + * @dev: pointer to network device structure + */ +static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb, + struct net_device *dev) +{ + struct slgt_info *info = dev_to_port(dev); + unsigned long flags; + + DBGINFO(("%s hdlc_xmit\n", dev->name)); + + if (!skb->len) + return NETDEV_TX_OK; + + /* stop sending until this frame completes */ + netif_stop_queue(dev); + + /* update network statistics */ + dev->stats.tx_packets++; + dev->stats.tx_bytes += skb->len; + + /* save start time for transmit timeout detection */ + netif_trans_update(dev); + + spin_lock_irqsave(&info->lock, flags); + tx_load(info, skb->data, skb->len); + spin_unlock_irqrestore(&info->lock, flags); + + /* done with socket buffer, so free it */ + dev_kfree_skb(skb); + + return NETDEV_TX_OK; +} + +/** + * hdlcdev_open - called by network layer when interface enabled + * @dev: pointer to network device structure + * + * Claim resources and initialize hardware. + * + * Return: 0 if success, otherwise error code + */ +static int hdlcdev_open(struct net_device *dev) +{ + struct slgt_info *info = dev_to_port(dev); + int rc; + unsigned long flags; + + if (!try_module_get(THIS_MODULE)) + return -EBUSY; + + DBGINFO(("%s hdlcdev_open\n", dev->name)); + + /* generic HDLC layer open processing */ + rc = hdlc_open(dev); + if (rc) + return rc; + + /* arbitrate between network and tty opens */ + spin_lock_irqsave(&info->netlock, flags); + if (info->port.count != 0 || info->netcount != 0) { + DBGINFO(("%s hdlc_open busy\n", dev->name)); + spin_unlock_irqrestore(&info->netlock, flags); + return -EBUSY; + } + info->netcount=1; + spin_unlock_irqrestore(&info->netlock, flags); + + /* claim resources and init adapter */ + if ((rc = startup(info)) != 0) { + spin_lock_irqsave(&info->netlock, flags); + info->netcount=0; + spin_unlock_irqrestore(&info->netlock, flags); + return rc; + } + + /* assert RTS and DTR, apply hardware settings */ + info->signals |= SerialSignal_RTS | SerialSignal_DTR; + program_hw(info); + + /* enable network layer transmit */ + netif_trans_update(dev); + netif_start_queue(dev); + + /* inform generic HDLC layer of current DCD status */ + spin_lock_irqsave(&info->lock, flags); + get_gtsignals(info); + spin_unlock_irqrestore(&info->lock, flags); + if (info->signals & SerialSignal_DCD) + netif_carrier_on(dev); + else + netif_carrier_off(dev); + return 0; +} + +/** + * hdlcdev_close - called by network layer when interface is disabled + * @dev: pointer to network device structure + * + * Shutdown hardware and release resources. + * + * Return: 0 if success, otherwise error code + */ +static int hdlcdev_close(struct net_device *dev) +{ + struct slgt_info *info = dev_to_port(dev); + unsigned long flags; + + DBGINFO(("%s hdlcdev_close\n", dev->name)); + + netif_stop_queue(dev); + + /* shutdown adapter and release resources */ + shutdown(info); + + hdlc_close(dev); + + spin_lock_irqsave(&info->netlock, flags); + info->netcount=0; + spin_unlock_irqrestore(&info->netlock, flags); + + module_put(THIS_MODULE); + return 0; +} + +/** + * hdlcdev_ioctl - called by network layer to process IOCTL call to network device + * @dev: pointer to network device structure + * @ifr: pointer to network interface request structure + * @cmd: IOCTL command code + * + * Return: 0 if success, otherwise error code + */ +static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + const size_t size = sizeof(sync_serial_settings); + sync_serial_settings new_line; + sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync; + struct slgt_info *info = dev_to_port(dev); + unsigned int flags; + + DBGINFO(("%s hdlcdev_ioctl\n", dev->name)); + + /* return error if TTY interface open */ + if (info->port.count) + return -EBUSY; + + if (cmd != SIOCWANDEV) + return hdlc_ioctl(dev, ifr, cmd); + + memset(&new_line, 0, sizeof(new_line)); + + switch(ifr->ifr_settings.type) { + case IF_GET_IFACE: /* return current sync_serial_settings */ + + ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL; + if (ifr->ifr_settings.size < size) { + ifr->ifr_settings.size = size; /* data size wanted */ + return -ENOBUFS; + } + + flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | + HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | + HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | + HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); + + switch (flags){ + case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break; + case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break; + case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break; + case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break; + default: new_line.clock_type = CLOCK_DEFAULT; + } + + new_line.clock_rate = info->params.clock_speed; + new_line.loopback = info->params.loopback ? 1:0; + + if (copy_to_user(line, &new_line, size)) + return -EFAULT; + return 0; + + case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */ + + if(!capable(CAP_NET_ADMIN)) + return -EPERM; + if (copy_from_user(&new_line, line, size)) + return -EFAULT; + + switch (new_line.clock_type) + { + case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break; + case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break; + case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break; + case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break; + case CLOCK_DEFAULT: flags = info->params.flags & + (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | + HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | + HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | + HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break; + default: return -EINVAL; + } + + if (new_line.loopback != 0 && new_line.loopback != 1) + return -EINVAL; + + info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | + HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | + HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | + HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); + info->params.flags |= flags; + + info->params.loopback = new_line.loopback; + + if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG)) + info->params.clock_speed = new_line.clock_rate; + else + info->params.clock_speed = 0; + + /* if network interface up, reprogram hardware */ + if (info->netcount) + program_hw(info); + return 0; + + default: + return hdlc_ioctl(dev, ifr, cmd); + } +} + +/** + * hdlcdev_tx_timeout - called by network layer when transmit timeout is detected + * @dev: pointer to network device structure + */ +static void hdlcdev_tx_timeout(struct net_device *dev, unsigned int txqueue) +{ + struct slgt_info *info = dev_to_port(dev); + unsigned long flags; + + DBGINFO(("%s hdlcdev_tx_timeout\n", dev->name)); + + dev->stats.tx_errors++; + dev->stats.tx_aborted_errors++; + + spin_lock_irqsave(&info->lock,flags); + tx_stop(info); + spin_unlock_irqrestore(&info->lock,flags); + + netif_wake_queue(dev); +} + +/** + * hdlcdev_tx_done - called by device driver when transmit completes + * @info: pointer to device instance information + * + * Reenable network layer transmit if stopped. + */ +static void hdlcdev_tx_done(struct slgt_info *info) +{ + if (netif_queue_stopped(info->netdev)) + netif_wake_queue(info->netdev); +} + +/** + * hdlcdev_rx - called by device driver when frame received + * @info: pointer to device instance information + * @buf: pointer to buffer contianing frame data + * @size: count of data bytes in buf + * + * Pass frame to network layer. + */ +static void hdlcdev_rx(struct slgt_info *info, char *buf, int size) +{ + struct sk_buff *skb = dev_alloc_skb(size); + struct net_device *dev = info->netdev; + + DBGINFO(("%s hdlcdev_rx\n", dev->name)); + + if (skb == NULL) { + DBGERR(("%s: can't alloc skb, drop packet\n", dev->name)); + dev->stats.rx_dropped++; + return; + } + + skb_put_data(skb, buf, size); + + skb->protocol = hdlc_type_trans(skb, dev); + + dev->stats.rx_packets++; + dev->stats.rx_bytes += size; + + netif_rx(skb); +} + +static const struct net_device_ops hdlcdev_ops = { + .ndo_open = hdlcdev_open, + .ndo_stop = hdlcdev_close, + .ndo_start_xmit = hdlc_start_xmit, + .ndo_do_ioctl = hdlcdev_ioctl, + .ndo_tx_timeout = hdlcdev_tx_timeout, +}; + +/** + * hdlcdev_init - called by device driver when adding device instance + * @info: pointer to device instance information + * + * Do generic HDLC initialization. + * + * Return: 0 if success, otherwise error code + */ +static int hdlcdev_init(struct slgt_info *info) +{ + int rc; + struct net_device *dev; + hdlc_device *hdlc; + + /* allocate and initialize network and HDLC layer objects */ + + dev = alloc_hdlcdev(info); + if (!dev) { + printk(KERN_ERR "%s hdlc device alloc failure\n", info->device_name); + return -ENOMEM; + } + + /* for network layer reporting purposes only */ + dev->mem_start = info->phys_reg_addr; + dev->mem_end = info->phys_reg_addr + SLGT_REG_SIZE - 1; + dev->irq = info->irq_level; + + /* network layer callbacks and settings */ + dev->netdev_ops = &hdlcdev_ops; + dev->watchdog_timeo = 10 * HZ; + dev->tx_queue_len = 50; + + /* generic HDLC layer callbacks and settings */ + hdlc = dev_to_hdlc(dev); + hdlc->attach = hdlcdev_attach; + hdlc->xmit = hdlcdev_xmit; + + /* register objects with HDLC layer */ + rc = register_hdlc_device(dev); + if (rc) { + printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__); + free_netdev(dev); + return rc; + } + + info->netdev = dev; + return 0; +} + +/** + * hdlcdev_exit - called by device driver when removing device instance + * @info: pointer to device instance information + * + * Do generic HDLC cleanup. + */ +static void hdlcdev_exit(struct slgt_info *info) +{ + if (!info->netdev) + return; + unregister_hdlc_device(info->netdev); + free_netdev(info->netdev); + info->netdev = NULL; +} + +#endif /* ifdef CONFIG_HDLC */ + +/* + * get async data from rx DMA buffers + */ +static void rx_async(struct slgt_info *info) +{ + struct mgsl_icount *icount = &info->icount; + unsigned int start, end; + unsigned char *p; + unsigned char status; + struct slgt_desc *bufs = info->rbufs; + int i, count; + int chars = 0; + int stat; + unsigned char ch; + + start = end = info->rbuf_current; + + while(desc_complete(bufs[end])) { + count = desc_count(bufs[end]) - info->rbuf_index; + p = bufs[end].buf + info->rbuf_index; + + DBGISR(("%s rx_async count=%d\n", info->device_name, count)); + DBGDATA(info, p, count, "rx"); + + for(i=0 ; i < count; i+=2, p+=2) { + ch = *p; + icount->rx++; + + stat = 0; + + status = *(p + 1) & (BIT1 + BIT0); + if (status) { + if (status & BIT1) + icount->parity++; + else if (status & BIT0) + icount->frame++; + /* discard char if tty control flags say so */ + if (status & info->ignore_status_mask) + continue; + if (status & BIT1) + stat = TTY_PARITY; + else if (status & BIT0) + stat = TTY_FRAME; + } + tty_insert_flip_char(&info->port, ch, stat); + chars++; + } + + if (i < count) { + /* receive buffer not completed */ + info->rbuf_index += i; + mod_timer(&info->rx_timer, jiffies + 1); + break; + } + + info->rbuf_index = 0; + free_rbufs(info, end, end); + + if (++end == info->rbuf_count) + end = 0; + + /* if entire list searched then no frame available */ + if (end == start) + break; + } + + if (chars) + tty_flip_buffer_push(&info->port); +} + +/* + * return next bottom half action to perform + */ +static int bh_action(struct slgt_info *info) +{ + unsigned long flags; + int rc; + + spin_lock_irqsave(&info->lock,flags); + + if (info->pending_bh & BH_RECEIVE) { + info->pending_bh &= ~BH_RECEIVE; + rc = BH_RECEIVE; + } else if (info->pending_bh & BH_TRANSMIT) { + info->pending_bh &= ~BH_TRANSMIT; + rc = BH_TRANSMIT; + } else if (info->pending_bh & BH_STATUS) { + info->pending_bh &= ~BH_STATUS; + rc = BH_STATUS; + } else { + /* Mark BH routine as complete */ + info->bh_running = false; + info->bh_requested = false; + rc = 0; + } + + spin_unlock_irqrestore(&info->lock,flags); + + return rc; +} + +/* + * perform bottom half processing + */ +static void bh_handler(struct work_struct *work) +{ + struct slgt_info *info = container_of(work, struct slgt_info, task); + int action; + + info->bh_running = true; + + while((action = bh_action(info))) { + switch (action) { + case BH_RECEIVE: + DBGBH(("%s bh receive\n", info->device_name)); + switch(info->params.mode) { + case MGSL_MODE_ASYNC: + rx_async(info); + break; + case MGSL_MODE_HDLC: + while(rx_get_frame(info)); + break; + case MGSL_MODE_RAW: + case MGSL_MODE_MONOSYNC: + case MGSL_MODE_BISYNC: + case MGSL_MODE_XSYNC: + while(rx_get_buf(info)); + break; + } + /* restart receiver if rx DMA buffers exhausted */ + if (info->rx_restart) + rx_start(info); + break; + case BH_TRANSMIT: + bh_transmit(info); + break; + case BH_STATUS: + DBGBH(("%s bh status\n", info->device_name)); + info->ri_chkcount = 0; + info->dsr_chkcount = 0; + info->dcd_chkcount = 0; + info->cts_chkcount = 0; + break; + default: + DBGBH(("%s unknown action\n", info->device_name)); + break; + } + } + DBGBH(("%s bh_handler exit\n", info->device_name)); +} + +static void bh_transmit(struct slgt_info *info) +{ + struct tty_struct *tty = info->port.tty; + + DBGBH(("%s bh_transmit\n", info->device_name)); + if (tty) + tty_wakeup(tty); +} + +static void dsr_change(struct slgt_info *info, unsigned short status) +{ + if (status & BIT3) { + info->signals |= SerialSignal_DSR; + info->input_signal_events.dsr_up++; + } else { + info->signals &= ~SerialSignal_DSR; + info->input_signal_events.dsr_down++; + } + DBGISR(("dsr_change %s signals=%04X\n", info->device_name, info->signals)); + if ((info->dsr_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) { + slgt_irq_off(info, IRQ_DSR); + return; + } + info->icount.dsr++; + wake_up_interruptible(&info->status_event_wait_q); + wake_up_interruptible(&info->event_wait_q); + info->pending_bh |= BH_STATUS; +} + +static void cts_change(struct slgt_info *info, unsigned short status) +{ + if (status & BIT2) { + info->signals |= SerialSignal_CTS; + info->input_signal_events.cts_up++; + } else { + info->signals &= ~SerialSignal_CTS; + info->input_signal_events.cts_down++; + } + DBGISR(("cts_change %s signals=%04X\n", info->device_name, info->signals)); + if ((info->cts_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) { + slgt_irq_off(info, IRQ_CTS); + return; + } + info->icount.cts++; + wake_up_interruptible(&info->status_event_wait_q); + wake_up_interruptible(&info->event_wait_q); + info->pending_bh |= BH_STATUS; + + if (tty_port_cts_enabled(&info->port)) { + if (info->port.tty) { + if (info->port.tty->hw_stopped) { + if (info->signals & SerialSignal_CTS) { + info->port.tty->hw_stopped = 0; + info->pending_bh |= BH_TRANSMIT; + return; + } + } else { + if (!(info->signals & SerialSignal_CTS)) + info->port.tty->hw_stopped = 1; + } + } + } +} + +static void dcd_change(struct slgt_info *info, unsigned short status) +{ + if (status & BIT1) { + info->signals |= SerialSignal_DCD; + info->input_signal_events.dcd_up++; + } else { + info->signals &= ~SerialSignal_DCD; + info->input_signal_events.dcd_down++; + } + DBGISR(("dcd_change %s signals=%04X\n", info->device_name, info->signals)); + if ((info->dcd_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) { + slgt_irq_off(info, IRQ_DCD); + return; + } + info->icount.dcd++; +#if SYNCLINK_GENERIC_HDLC + if (info->netcount) { + if (info->signals & SerialSignal_DCD) + netif_carrier_on(info->netdev); + else + netif_carrier_off(info->netdev); + } +#endif + wake_up_interruptible(&info->status_event_wait_q); + wake_up_interruptible(&info->event_wait_q); + info->pending_bh |= BH_STATUS; + + if (tty_port_check_carrier(&info->port)) { + if (info->signals & SerialSignal_DCD) + wake_up_interruptible(&info->port.open_wait); + else { + if (info->port.tty) + tty_hangup(info->port.tty); + } + } +} + +static void ri_change(struct slgt_info *info, unsigned short status) +{ + if (status & BIT0) { + info->signals |= SerialSignal_RI; + info->input_signal_events.ri_up++; + } else { + info->signals &= ~SerialSignal_RI; + info->input_signal_events.ri_down++; + } + DBGISR(("ri_change %s signals=%04X\n", info->device_name, info->signals)); + if ((info->ri_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) { + slgt_irq_off(info, IRQ_RI); + return; + } + info->icount.rng++; + wake_up_interruptible(&info->status_event_wait_q); + wake_up_interruptible(&info->event_wait_q); + info->pending_bh |= BH_STATUS; +} + +static void isr_rxdata(struct slgt_info *info) +{ + unsigned int count = info->rbuf_fill_count; + unsigned int i = info->rbuf_fill_index; + unsigned short reg; + + while (rd_reg16(info, SSR) & IRQ_RXDATA) { + reg = rd_reg16(info, RDR); + DBGISR(("isr_rxdata %s RDR=%04X\n", info->device_name, reg)); + if (desc_complete(info->rbufs[i])) { + /* all buffers full */ + rx_stop(info); + info->rx_restart = true; + continue; + } + info->rbufs[i].buf[count++] = (unsigned char)reg; + /* async mode saves status byte to buffer for each data byte */ + if (info->params.mode == MGSL_MODE_ASYNC) + info->rbufs[i].buf[count++] = (unsigned char)(reg >> 8); + if (count == info->rbuf_fill_level || (reg & BIT10)) { + /* buffer full or end of frame */ + set_desc_count(info->rbufs[i], count); + set_desc_status(info->rbufs[i], BIT15 | (reg >> 8)); + info->rbuf_fill_count = count = 0; + if (++i == info->rbuf_count) + i = 0; + info->pending_bh |= BH_RECEIVE; + } + } + + info->rbuf_fill_index = i; + info->rbuf_fill_count = count; +} + +static void isr_serial(struct slgt_info *info) +{ + unsigned short status = rd_reg16(info, SSR); + + DBGISR(("%s isr_serial status=%04X\n", info->device_name, status)); + + wr_reg16(info, SSR, status); /* clear pending */ + + info->irq_occurred = true; + + if (info->params.mode == MGSL_MODE_ASYNC) { + if (status & IRQ_TXIDLE) { + if (info->tx_active) + isr_txeom(info, status); + } + if (info->rx_pio && (status & IRQ_RXDATA)) + isr_rxdata(info); + if ((status & IRQ_RXBREAK) && (status & RXBREAK)) { + info->icount.brk++; + /* process break detection if tty control allows */ + if (info->port.tty) { + if (!(status & info->ignore_status_mask)) { + if (info->read_status_mask & MASK_BREAK) { + tty_insert_flip_char(&info->port, 0, TTY_BREAK); + if (info->port.flags & ASYNC_SAK) + do_SAK(info->port.tty); + } + } + } + } + } else { + if (status & (IRQ_TXIDLE + IRQ_TXUNDER)) + isr_txeom(info, status); + if (info->rx_pio && (status & IRQ_RXDATA)) + isr_rxdata(info); + if (status & IRQ_RXIDLE) { + if (status & RXIDLE) + info->icount.rxidle++; + else + info->icount.exithunt++; + wake_up_interruptible(&info->event_wait_q); + } + + if (status & IRQ_RXOVER) + rx_start(info); + } + + if (status & IRQ_DSR) + dsr_change(info, status); + if (status & IRQ_CTS) + cts_change(info, status); + if (status & IRQ_DCD) + dcd_change(info, status); + if (status & IRQ_RI) + ri_change(info, status); +} + +static void isr_rdma(struct slgt_info *info) +{ + unsigned int status = rd_reg32(info, RDCSR); + + DBGISR(("%s isr_rdma status=%08x\n", info->device_name, status)); + + /* RDCSR (rx DMA control/status) + * + * 31..07 reserved + * 06 save status byte to DMA buffer + * 05 error + * 04 eol (end of list) + * 03 eob (end of buffer) + * 02 IRQ enable + * 01 reset + * 00 enable + */ + wr_reg32(info, RDCSR, status); /* clear pending */ + + if (status & (BIT5 + BIT4)) { + DBGISR(("%s isr_rdma rx_restart=1\n", info->device_name)); + info->rx_restart = true; + } + info->pending_bh |= BH_RECEIVE; +} + +static void isr_tdma(struct slgt_info *info) +{ + unsigned int status = rd_reg32(info, TDCSR); + + DBGISR(("%s isr_tdma status=%08x\n", info->device_name, status)); + + /* TDCSR (tx DMA control/status) + * + * 31..06 reserved + * 05 error + * 04 eol (end of list) + * 03 eob (end of buffer) + * 02 IRQ enable + * 01 reset + * 00 enable + */ + wr_reg32(info, TDCSR, status); /* clear pending */ + + if (status & (BIT5 + BIT4 + BIT3)) { + // another transmit buffer has completed + // run bottom half to get more send data from user + info->pending_bh |= BH_TRANSMIT; + } +} + +/* + * return true if there are unsent tx DMA buffers, otherwise false + * + * if there are unsent buffers then info->tbuf_start + * is set to index of first unsent buffer + */ +static bool unsent_tbufs(struct slgt_info *info) +{ + unsigned int i = info->tbuf_current; + bool rc = false; + + /* + * search backwards from last loaded buffer (precedes tbuf_current) + * for first unsent buffer (desc_count > 0) + */ + + do { + if (i) + i--; + else + i = info->tbuf_count - 1; + if (!desc_count(info->tbufs[i])) + break; + info->tbuf_start = i; + rc = true; + } while (i != info->tbuf_current); + + return rc; +} + +static void isr_txeom(struct slgt_info *info, unsigned short status) +{ + DBGISR(("%s txeom status=%04x\n", info->device_name, status)); + + slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER); + tdma_reset(info); + if (status & IRQ_TXUNDER) { + unsigned short val = rd_reg16(info, TCR); + wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */ + wr_reg16(info, TCR, val); /* clear reset bit */ + } + + if (info->tx_active) { + if (info->params.mode != MGSL_MODE_ASYNC) { + if (status & IRQ_TXUNDER) + info->icount.txunder++; + else if (status & IRQ_TXIDLE) + info->icount.txok++; + } + + if (unsent_tbufs(info)) { + tx_start(info); + update_tx_timer(info); + return; + } + info->tx_active = false; + + del_timer(&info->tx_timer); + + if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done) { + info->signals &= ~SerialSignal_RTS; + info->drop_rts_on_tx_done = false; + set_gtsignals(info); + } + +#if SYNCLINK_GENERIC_HDLC + if (info->netcount) + hdlcdev_tx_done(info); + else +#endif + { + if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) { + tx_stop(info); + return; + } + info->pending_bh |= BH_TRANSMIT; + } + } +} + +static void isr_gpio(struct slgt_info *info, unsigned int changed, unsigned int state) +{ + struct cond_wait *w, *prev; + + /* wake processes waiting for specific transitions */ + for (w = info->gpio_wait_q, prev = NULL ; w != NULL ; w = w->next) { + if (w->data & changed) { + w->data = state; + wake_up_interruptible(&w->q); + if (prev != NULL) + prev->next = w->next; + else + info->gpio_wait_q = w->next; + } else + prev = w; + } +} + +/* interrupt service routine + * + * irq interrupt number + * dev_id device ID supplied during interrupt registration + */ +static irqreturn_t slgt_interrupt(int dummy, void *dev_id) +{ + struct slgt_info *info = dev_id; + unsigned int gsr; + unsigned int i; + + DBGISR(("slgt_interrupt irq=%d entry\n", info->irq_level)); + + while((gsr = rd_reg32(info, GSR) & 0xffffff00)) { + DBGISR(("%s gsr=%08x\n", info->device_name, gsr)); + info->irq_occurred = true; + for(i=0; i < info->port_count ; i++) { + if (info->port_array[i] == NULL) + continue; + spin_lock(&info->port_array[i]->lock); + if (gsr & (BIT8 << i)) + isr_serial(info->port_array[i]); + if (gsr & (BIT16 << (i*2))) + isr_rdma(info->port_array[i]); + if (gsr & (BIT17 << (i*2))) + isr_tdma(info->port_array[i]); + spin_unlock(&info->port_array[i]->lock); + } + } + + if (info->gpio_present) { + unsigned int state; + unsigned int changed; + spin_lock(&info->lock); + while ((changed = rd_reg32(info, IOSR)) != 0) { + DBGISR(("%s iosr=%08x\n", info->device_name, changed)); + /* read latched state of GPIO signals */ + state = rd_reg32(info, IOVR); + /* clear pending GPIO interrupt bits */ + wr_reg32(info, IOSR, changed); + for (i=0 ; i < info->port_count ; i++) { + if (info->port_array[i] != NULL) + isr_gpio(info->port_array[i], changed, state); + } + } + spin_unlock(&info->lock); + } + + for(i=0; i < info->port_count ; i++) { + struct slgt_info *port = info->port_array[i]; + if (port == NULL) + continue; + spin_lock(&port->lock); + if ((port->port.count || port->netcount) && + port->pending_bh && !port->bh_running && + !port->bh_requested) { + DBGISR(("%s bh queued\n", port->device_name)); + schedule_work(&port->task); + port->bh_requested = true; + } + spin_unlock(&port->lock); + } + + DBGISR(("slgt_interrupt irq=%d exit\n", info->irq_level)); + return IRQ_HANDLED; +} + +static int startup(struct slgt_info *info) +{ + DBGINFO(("%s startup\n", info->device_name)); + + if (tty_port_initialized(&info->port)) + return 0; + + if (!info->tx_buf) { + info->tx_buf = kmalloc(info->max_frame_size, GFP_KERNEL); + if (!info->tx_buf) { + DBGERR(("%s can't allocate tx buffer\n", info->device_name)); + return -ENOMEM; + } + } + + info->pending_bh = 0; + + memset(&info->icount, 0, sizeof(info->icount)); + + /* program hardware for current parameters */ + change_params(info); + + if (info->port.tty) + clear_bit(TTY_IO_ERROR, &info->port.tty->flags); + + tty_port_set_initialized(&info->port, 1); + + return 0; +} + +/* + * called by close() and hangup() to shutdown hardware + */ +static void shutdown(struct slgt_info *info) +{ + unsigned long flags; + + if (!tty_port_initialized(&info->port)) + return; + + DBGINFO(("%s shutdown\n", info->device_name)); + + /* clear status wait queue because status changes */ + /* can't happen after shutting down the hardware */ + wake_up_interruptible(&info->status_event_wait_q); + wake_up_interruptible(&info->event_wait_q); + + del_timer_sync(&info->tx_timer); + del_timer_sync(&info->rx_timer); + + kfree(info->tx_buf); + info->tx_buf = NULL; + + spin_lock_irqsave(&info->lock,flags); + + tx_stop(info); + rx_stop(info); + + slgt_irq_off(info, IRQ_ALL | IRQ_MASTER); + + if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) { + info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR); + set_gtsignals(info); + } + + flush_cond_wait(&info->gpio_wait_q); + + spin_unlock_irqrestore(&info->lock,flags); + + if (info->port.tty) + set_bit(TTY_IO_ERROR, &info->port.tty->flags); + + tty_port_set_initialized(&info->port, 0); +} + +static void program_hw(struct slgt_info *info) +{ + unsigned long flags; + + spin_lock_irqsave(&info->lock,flags); + + rx_stop(info); + tx_stop(info); + + if (info->params.mode != MGSL_MODE_ASYNC || + info->netcount) + sync_mode(info); + else + async_mode(info); + + set_gtsignals(info); + + info->dcd_chkcount = 0; + info->cts_chkcount = 0; + info->ri_chkcount = 0; + info->dsr_chkcount = 0; + + slgt_irq_on(info, IRQ_DCD | IRQ_CTS | IRQ_DSR | IRQ_RI); + get_gtsignals(info); + + if (info->netcount || + (info->port.tty && info->port.tty->termios.c_cflag & CREAD)) + rx_start(info); + + spin_unlock_irqrestore(&info->lock,flags); +} + +/* + * reconfigure adapter based on new parameters + */ +static void change_params(struct slgt_info *info) +{ + unsigned cflag; + int bits_per_char; + + if (!info->port.tty) + return; + DBGINFO(("%s change_params\n", info->device_name)); + + cflag = info->port.tty->termios.c_cflag; + + /* if B0 rate (hangup) specified then negate RTS and DTR */ + /* otherwise assert RTS and DTR */ + if (cflag & CBAUD) + info->signals |= SerialSignal_RTS | SerialSignal_DTR; + else + info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR); + + /* byte size and parity */ + + switch (cflag & CSIZE) { + case CS5: info->params.data_bits = 5; break; + case CS6: info->params.data_bits = 6; break; + case CS7: info->params.data_bits = 7; break; + case CS8: info->params.data_bits = 8; break; + default: info->params.data_bits = 7; break; + } + + info->params.stop_bits = (cflag & CSTOPB) ? 2 : 1; + + if (cflag & PARENB) + info->params.parity = (cflag & PARODD) ? ASYNC_PARITY_ODD : ASYNC_PARITY_EVEN; + else + info->params.parity = ASYNC_PARITY_NONE; + + /* calculate number of jiffies to transmit a full + * FIFO (32 bytes) at specified data rate + */ + bits_per_char = info->params.data_bits + + info->params.stop_bits + 1; + + info->params.data_rate = tty_get_baud_rate(info->port.tty); + + if (info->params.data_rate) { + info->timeout = (32*HZ*bits_per_char) / + info->params.data_rate; + } + info->timeout += HZ/50; /* Add .02 seconds of slop */ + + tty_port_set_cts_flow(&info->port, cflag & CRTSCTS); + tty_port_set_check_carrier(&info->port, ~cflag & CLOCAL); + + /* process tty input control flags */ + + info->read_status_mask = IRQ_RXOVER; + if (I_INPCK(info->port.tty)) + info->read_status_mask |= MASK_PARITY | MASK_FRAMING; + if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) + info->read_status_mask |= MASK_BREAK; + if (I_IGNPAR(info->port.tty)) + info->ignore_status_mask |= MASK_PARITY | MASK_FRAMING; + if (I_IGNBRK(info->port.tty)) { + info->ignore_status_mask |= MASK_BREAK; + /* If ignoring parity and break indicators, ignore + * overruns too. (For real raw support). + */ + if (I_IGNPAR(info->port.tty)) + info->ignore_status_mask |= MASK_OVERRUN; + } + + program_hw(info); +} + +static int get_stats(struct slgt_info *info, struct mgsl_icount __user *user_icount) +{ + DBGINFO(("%s get_stats\n", info->device_name)); + if (!user_icount) { + memset(&info->icount, 0, sizeof(info->icount)); + } else { + if (copy_to_user(user_icount, &info->icount, sizeof(struct mgsl_icount))) + return -EFAULT; + } + return 0; +} + +static int get_params(struct slgt_info *info, MGSL_PARAMS __user *user_params) +{ + DBGINFO(("%s get_params\n", info->device_name)); + if (copy_to_user(user_params, &info->params, sizeof(MGSL_PARAMS))) + return -EFAULT; + return 0; +} + +static int set_params(struct slgt_info *info, MGSL_PARAMS __user *new_params) +{ + unsigned long flags; + MGSL_PARAMS tmp_params; + + DBGINFO(("%s set_params\n", info->device_name)); + if (copy_from_user(&tmp_params, new_params, sizeof(MGSL_PARAMS))) + return -EFAULT; + + spin_lock_irqsave(&info->lock, flags); + if (tmp_params.mode == MGSL_MODE_BASE_CLOCK) + info->base_clock = tmp_params.clock_speed; + else + memcpy(&info->params, &tmp_params, sizeof(MGSL_PARAMS)); + spin_unlock_irqrestore(&info->lock, flags); + + program_hw(info); + + return 0; +} + +static int get_txidle(struct slgt_info *info, int __user *idle_mode) +{ + DBGINFO(("%s get_txidle=%d\n", info->device_name, info->idle_mode)); + if (put_user(info->idle_mode, idle_mode)) + return -EFAULT; + return 0; +} + +static int set_txidle(struct slgt_info *info, int idle_mode) +{ + unsigned long flags; + DBGINFO(("%s set_txidle(%d)\n", info->device_name, idle_mode)); + spin_lock_irqsave(&info->lock,flags); + info->idle_mode = idle_mode; + if (info->params.mode != MGSL_MODE_ASYNC) + tx_set_idle(info); + spin_unlock_irqrestore(&info->lock,flags); + return 0; +} + +static int tx_enable(struct slgt_info *info, int enable) +{ + unsigned long flags; + DBGINFO(("%s tx_enable(%d)\n", info->device_name, enable)); + spin_lock_irqsave(&info->lock,flags); + if (enable) { + if (!info->tx_enabled) + tx_start(info); + } else { + if (info->tx_enabled) + tx_stop(info); + } + spin_unlock_irqrestore(&info->lock,flags); + return 0; +} + +/* + * abort transmit HDLC frame + */ +static int tx_abort(struct slgt_info *info) +{ + unsigned long flags; + DBGINFO(("%s tx_abort\n", info->device_name)); + spin_lock_irqsave(&info->lock,flags); + tdma_reset(info); + spin_unlock_irqrestore(&info->lock,flags); + return 0; +} + +static int rx_enable(struct slgt_info *info, int enable) +{ + unsigned long flags; + unsigned int rbuf_fill_level; + DBGINFO(("%s rx_enable(%08x)\n", info->device_name, enable)); + spin_lock_irqsave(&info->lock,flags); + /* + * enable[31..16] = receive DMA buffer fill level + * 0 = noop (leave fill level unchanged) + * fill level must be multiple of 4 and <= buffer size + */ + rbuf_fill_level = ((unsigned int)enable) >> 16; + if (rbuf_fill_level) { + if ((rbuf_fill_level > DMABUFSIZE) || (rbuf_fill_level % 4)) { + spin_unlock_irqrestore(&info->lock, flags); + return -EINVAL; + } + info->rbuf_fill_level = rbuf_fill_level; + if (rbuf_fill_level < 128) + info->rx_pio = 1; /* PIO mode */ + else + info->rx_pio = 0; /* DMA mode */ + rx_stop(info); /* restart receiver to use new fill level */ + } + + /* + * enable[1..0] = receiver enable command + * 0 = disable + * 1 = enable + * 2 = enable or force hunt mode if already enabled + */ + enable &= 3; + if (enable) { + if (!info->rx_enabled) + rx_start(info); + else if (enable == 2) { + /* force hunt mode (write 1 to RCR[3]) */ + wr_reg16(info, RCR, rd_reg16(info, RCR) | BIT3); + } + } else { + if (info->rx_enabled) + rx_stop(info); + } + spin_unlock_irqrestore(&info->lock,flags); + return 0; +} + +/* + * wait for specified event to occur + */ +static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr) +{ + unsigned long flags; + int s; + int rc=0; + struct mgsl_icount cprev, cnow; + int events; + int mask; + struct _input_signal_events oldsigs, newsigs; + DECLARE_WAITQUEUE(wait, current); + + if (get_user(mask, mask_ptr)) + return -EFAULT; + + DBGINFO(("%s wait_mgsl_event(%d)\n", info->device_name, mask)); + + spin_lock_irqsave(&info->lock,flags); + + /* return immediately if state matches requested events */ + get_gtsignals(info); + s = info->signals; + + events = mask & + ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) + + ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) + + ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) + + ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) ); + if (events) { + spin_unlock_irqrestore(&info->lock,flags); + goto exit; + } + + /* save current irq counts */ + cprev = info->icount; + oldsigs = info->input_signal_events; + + /* enable hunt and idle irqs if needed */ + if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) { + unsigned short val = rd_reg16(info, SCR); + if (!(val & IRQ_RXIDLE)) + wr_reg16(info, SCR, (unsigned short)(val | IRQ_RXIDLE)); + } + + set_current_state(TASK_INTERRUPTIBLE); + add_wait_queue(&info->event_wait_q, &wait); + + spin_unlock_irqrestore(&info->lock,flags); + + for(;;) { + schedule(); + if (signal_pending(current)) { + rc = -ERESTARTSYS; + break; + } + + /* get current irq counts */ + spin_lock_irqsave(&info->lock,flags); + cnow = info->icount; + newsigs = info->input_signal_events; + set_current_state(TASK_INTERRUPTIBLE); + spin_unlock_irqrestore(&info->lock,flags); + + /* if no change, wait aborted for some reason */ + if (newsigs.dsr_up == oldsigs.dsr_up && + newsigs.dsr_down == oldsigs.dsr_down && + newsigs.dcd_up == oldsigs.dcd_up && + newsigs.dcd_down == oldsigs.dcd_down && + newsigs.cts_up == oldsigs.cts_up && + newsigs.cts_down == oldsigs.cts_down && + newsigs.ri_up == oldsigs.ri_up && + newsigs.ri_down == oldsigs.ri_down && + cnow.exithunt == cprev.exithunt && + cnow.rxidle == cprev.rxidle) { + rc = -EIO; + break; + } + + events = mask & + ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) + + (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) + + (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) + + (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) + + (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) + + (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) + + (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) + + (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) + + (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) + + (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) ); + if (events) + break; + + cprev = cnow; + oldsigs = newsigs; + } + + remove_wait_queue(&info->event_wait_q, &wait); + set_current_state(TASK_RUNNING); + + + if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) { + spin_lock_irqsave(&info->lock,flags); + if (!waitqueue_active(&info->event_wait_q)) { + /* disable enable exit hunt mode/idle rcvd IRQs */ + wr_reg16(info, SCR, + (unsigned short)(rd_reg16(info, SCR) & ~IRQ_RXIDLE)); + } + spin_unlock_irqrestore(&info->lock,flags); + } +exit: + if (rc == 0) + rc = put_user(events, mask_ptr); + return rc; +} + +static int get_interface(struct slgt_info *info, int __user *if_mode) +{ + DBGINFO(("%s get_interface=%x\n", info->device_name, info->if_mode)); + if (put_user(info->if_mode, if_mode)) + return -EFAULT; + return 0; +} + +static int set_interface(struct slgt_info *info, int if_mode) +{ + unsigned long flags; + unsigned short val; + + DBGINFO(("%s set_interface=%x)\n", info->device_name, if_mode)); + spin_lock_irqsave(&info->lock,flags); + info->if_mode = if_mode; + + msc_set_vcr(info); + + /* TCR (tx control) 07 1=RTS driver control */ + val = rd_reg16(info, TCR); + if (info->if_mode & MGSL_INTERFACE_RTS_EN) + val |= BIT7; + else + val &= ~BIT7; + wr_reg16(info, TCR, val); + + spin_unlock_irqrestore(&info->lock,flags); + return 0; +} + +static int get_xsync(struct slgt_info *info, int __user *xsync) +{ + DBGINFO(("%s get_xsync=%x\n", info->device_name, info->xsync)); + if (put_user(info->xsync, xsync)) + return -EFAULT; + return 0; +} + +/* + * set extended sync pattern (1 to 4 bytes) for extended sync mode + * + * sync pattern is contained in least significant bytes of value + * most significant byte of sync pattern is oldest (1st sent/detected) + */ +static int set_xsync(struct slgt_info *info, int xsync) +{ + unsigned long flags; + + DBGINFO(("%s set_xsync=%x)\n", info->device_name, xsync)); + spin_lock_irqsave(&info->lock, flags); + info->xsync = xsync; + wr_reg32(info, XSR, xsync); + spin_unlock_irqrestore(&info->lock, flags); + return 0; +} + +static int get_xctrl(struct slgt_info *info, int __user *xctrl) +{ + DBGINFO(("%s get_xctrl=%x\n", info->device_name, info->xctrl)); + if (put_user(info->xctrl, xctrl)) + return -EFAULT; + return 0; +} + +/* + * set extended control options + * + * xctrl[31:19] reserved, must be zero + * xctrl[18:17] extended sync pattern length in bytes + * 00 = 1 byte in xsr[7:0] + * 01 = 2 bytes in xsr[15:0] + * 10 = 3 bytes in xsr[23:0] + * 11 = 4 bytes in xsr[31:0] + * xctrl[16] 1 = enable terminal count, 0=disabled + * xctrl[15:0] receive terminal count for fixed length packets + * value is count minus one (0 = 1 byte packet) + * when terminal count is reached, receiver + * automatically returns to hunt mode and receive + * FIFO contents are flushed to DMA buffers with + * end of frame (EOF) status + */ +static int set_xctrl(struct slgt_info *info, int xctrl) +{ + unsigned long flags; + + DBGINFO(("%s set_xctrl=%x)\n", info->device_name, xctrl)); + spin_lock_irqsave(&info->lock, flags); + info->xctrl = xctrl; + wr_reg32(info, XCR, xctrl); + spin_unlock_irqrestore(&info->lock, flags); + return 0; +} + +/* + * set general purpose IO pin state and direction + * + * user_gpio fields: + * state each bit indicates a pin state + * smask set bit indicates pin state to set + * dir each bit indicates a pin direction (0=input, 1=output) + * dmask set bit indicates pin direction to set + */ +static int set_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio) +{ + unsigned long flags; + struct gpio_desc gpio; + __u32 data; + + if (!info->gpio_present) + return -EINVAL; + if (copy_from_user(&gpio, user_gpio, sizeof(gpio))) + return -EFAULT; + DBGINFO(("%s set_gpio state=%08x smask=%08x dir=%08x dmask=%08x\n", + info->device_name, gpio.state, gpio.smask, + gpio.dir, gpio.dmask)); + + spin_lock_irqsave(&info->port_array[0]->lock, flags); + if (gpio.dmask) { + data = rd_reg32(info, IODR); + data |= gpio.dmask & gpio.dir; + data &= ~(gpio.dmask & ~gpio.dir); + wr_reg32(info, IODR, data); + } + if (gpio.smask) { + data = rd_reg32(info, IOVR); + data |= gpio.smask & gpio.state; + data &= ~(gpio.smask & ~gpio.state); + wr_reg32(info, IOVR, data); + } + spin_unlock_irqrestore(&info->port_array[0]->lock, flags); + + return 0; +} + +/* + * get general purpose IO pin state and direction + */ +static int get_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio) +{ + struct gpio_desc gpio; + if (!info->gpio_present) + return -EINVAL; + gpio.state = rd_reg32(info, IOVR); + gpio.smask = 0xffffffff; + gpio.dir = rd_reg32(info, IODR); + gpio.dmask = 0xffffffff; + if (copy_to_user(user_gpio, &gpio, sizeof(gpio))) + return -EFAULT; + DBGINFO(("%s get_gpio state=%08x dir=%08x\n", + info->device_name, gpio.state, gpio.dir)); + return 0; +} + +/* + * conditional wait facility + */ +static void init_cond_wait(struct cond_wait *w, unsigned int data) +{ + init_waitqueue_head(&w->q); + init_waitqueue_entry(&w->wait, current); + w->data = data; +} + +static void add_cond_wait(struct cond_wait **head, struct cond_wait *w) +{ + set_current_state(TASK_INTERRUPTIBLE); + add_wait_queue(&w->q, &w->wait); + w->next = *head; + *head = w; +} + +static void remove_cond_wait(struct cond_wait **head, struct cond_wait *cw) +{ + struct cond_wait *w, *prev; + remove_wait_queue(&cw->q, &cw->wait); + set_current_state(TASK_RUNNING); + for (w = *head, prev = NULL ; w != NULL ; prev = w, w = w->next) { + if (w == cw) { + if (prev != NULL) + prev->next = w->next; + else + *head = w->next; + break; + } + } +} + +static void flush_cond_wait(struct cond_wait **head) +{ + while (*head != NULL) { + wake_up_interruptible(&(*head)->q); + *head = (*head)->next; + } +} + +/* + * wait for general purpose I/O pin(s) to enter specified state + * + * user_gpio fields: + * state - bit indicates target pin state + * smask - set bit indicates watched pin + * + * The wait ends when at least one watched pin enters the specified + * state. When 0 (no error) is returned, user_gpio->state is set to the + * state of all GPIO pins when the wait ends. + * + * Note: Each pin may be a dedicated input, dedicated output, or + * configurable input/output. The number and configuration of pins + * varies with the specific adapter model. Only input pins (dedicated + * or configured) can be monitored with this function. + */ +static int wait_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio) +{ + unsigned long flags; + int rc = 0; + struct gpio_desc gpio; + struct cond_wait wait; + u32 state; + + if (!info->gpio_present) + return -EINVAL; + if (copy_from_user(&gpio, user_gpio, sizeof(gpio))) + return -EFAULT; + DBGINFO(("%s wait_gpio() state=%08x smask=%08x\n", + info->device_name, gpio.state, gpio.smask)); + /* ignore output pins identified by set IODR bit */ + if ((gpio.smask &= ~rd_reg32(info, IODR)) == 0) + return -EINVAL; + init_cond_wait(&wait, gpio.smask); + + spin_lock_irqsave(&info->port_array[0]->lock, flags); + /* enable interrupts for watched pins */ + wr_reg32(info, IOER, rd_reg32(info, IOER) | gpio.smask); + /* get current pin states */ + state = rd_reg32(info, IOVR); + + if (gpio.smask & ~(state ^ gpio.state)) { + /* already in target state */ + gpio.state = state; + } else { + /* wait for target state */ + add_cond_wait(&info->gpio_wait_q, &wait); + spin_unlock_irqrestore(&info->port_array[0]->lock, flags); + schedule(); + if (signal_pending(current)) + rc = -ERESTARTSYS; + else + gpio.state = wait.data; + spin_lock_irqsave(&info->port_array[0]->lock, flags); + remove_cond_wait(&info->gpio_wait_q, &wait); + } + + /* disable all GPIO interrupts if no waiting processes */ + if (info->gpio_wait_q == NULL) + wr_reg32(info, IOER, 0); + spin_unlock_irqrestore(&info->port_array[0]->lock, flags); + + if ((rc == 0) && copy_to_user(user_gpio, &gpio, sizeof(gpio))) + rc = -EFAULT; + return rc; +} + +static int modem_input_wait(struct slgt_info *info,int arg) +{ + unsigned long flags; + int rc; + struct mgsl_icount cprev, cnow; + DECLARE_WAITQUEUE(wait, current); + + /* save current irq counts */ + spin_lock_irqsave(&info->lock,flags); + cprev = info->icount; + add_wait_queue(&info->status_event_wait_q, &wait); + set_current_state(TASK_INTERRUPTIBLE); + spin_unlock_irqrestore(&info->lock,flags); + + for(;;) { + schedule(); + if (signal_pending(current)) { + rc = -ERESTARTSYS; + break; + } + + /* get new irq counts */ + spin_lock_irqsave(&info->lock,flags); + cnow = info->icount; + set_current_state(TASK_INTERRUPTIBLE); + spin_unlock_irqrestore(&info->lock,flags); + + /* if no change, wait aborted for some reason */ + if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && + cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) { + rc = -EIO; + break; + } + + /* check for change in caller specified modem input */ + if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) || + (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) || + (arg & TIOCM_CD && cnow.dcd != cprev.dcd) || + (arg & TIOCM_CTS && cnow.cts != cprev.cts)) { + rc = 0; + break; + } + + cprev = cnow; + } + remove_wait_queue(&info->status_event_wait_q, &wait); + set_current_state(TASK_RUNNING); + return rc; +} + +/* + * return state of serial control and status signals + */ +static int tiocmget(struct tty_struct *tty) +{ + struct slgt_info *info = tty->driver_data; + unsigned int result; + unsigned long flags; + + spin_lock_irqsave(&info->lock,flags); + get_gtsignals(info); + spin_unlock_irqrestore(&info->lock,flags); + + result = ((info->signals & SerialSignal_RTS) ? TIOCM_RTS:0) + + ((info->signals & SerialSignal_DTR) ? TIOCM_DTR:0) + + ((info->signals & SerialSignal_DCD) ? TIOCM_CAR:0) + + ((info->signals & SerialSignal_RI) ? TIOCM_RNG:0) + + ((info->signals & SerialSignal_DSR) ? TIOCM_DSR:0) + + ((info->signals & SerialSignal_CTS) ? TIOCM_CTS:0); + + DBGINFO(("%s tiocmget value=%08X\n", info->device_name, result)); + return result; +} + +/* + * set modem control signals (DTR/RTS) + * + * cmd signal command: TIOCMBIS = set bit TIOCMBIC = clear bit + * TIOCMSET = set/clear signal values + * value bit mask for command + */ +static int tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct slgt_info *info = tty->driver_data; + unsigned long flags; + + DBGINFO(("%s tiocmset(%x,%x)\n", info->device_name, set, clear)); + + if (set & TIOCM_RTS) + info->signals |= SerialSignal_RTS; + if (set & TIOCM_DTR) + info->signals |= SerialSignal_DTR; + if (clear & TIOCM_RTS) + info->signals &= ~SerialSignal_RTS; + if (clear & TIOCM_DTR) + info->signals &= ~SerialSignal_DTR; + + spin_lock_irqsave(&info->lock,flags); + set_gtsignals(info); + spin_unlock_irqrestore(&info->lock,flags); + return 0; +} + +static int carrier_raised(struct tty_port *port) +{ + unsigned long flags; + struct slgt_info *info = container_of(port, struct slgt_info, port); + + spin_lock_irqsave(&info->lock,flags); + get_gtsignals(info); + spin_unlock_irqrestore(&info->lock,flags); + return (info->signals & SerialSignal_DCD) ? 1 : 0; +} + +static void dtr_rts(struct tty_port *port, int on) +{ + unsigned long flags; + struct slgt_info *info = container_of(port, struct slgt_info, port); + + spin_lock_irqsave(&info->lock,flags); + if (on) + info->signals |= SerialSignal_RTS | SerialSignal_DTR; + else + info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR); + set_gtsignals(info); + spin_unlock_irqrestore(&info->lock,flags); +} + + +/* + * block current process until the device is ready to open + */ +static int block_til_ready(struct tty_struct *tty, struct file *filp, + struct slgt_info *info) +{ + DECLARE_WAITQUEUE(wait, current); + int retval; + bool do_clocal = false; + unsigned long flags; + int cd; + struct tty_port *port = &info->port; + + DBGINFO(("%s block_til_ready\n", tty->driver->name)); + + if (filp->f_flags & O_NONBLOCK || tty_io_error(tty)) { + /* nonblock mode is set or port is not enabled */ + tty_port_set_active(port, 1); + return 0; + } + + if (C_CLOCAL(tty)) + do_clocal = true; + + /* Wait for carrier detect and the line to become + * free (i.e., not in use by the callout). While we are in + * this loop, port->count is dropped by one, so that + * close() knows when to free things. We restore it upon + * exit, either normal or abnormal. + */ + + retval = 0; + add_wait_queue(&port->open_wait, &wait); + + spin_lock_irqsave(&info->lock, flags); + port->count--; + spin_unlock_irqrestore(&info->lock, flags); + port->blocked_open++; + + while (1) { + if (C_BAUD(tty) && tty_port_initialized(port)) + tty_port_raise_dtr_rts(port); + + set_current_state(TASK_INTERRUPTIBLE); + + if (tty_hung_up_p(filp) || !tty_port_initialized(port)) { + retval = (port->flags & ASYNC_HUP_NOTIFY) ? + -EAGAIN : -ERESTARTSYS; + break; + } + + cd = tty_port_carrier_raised(port); + if (do_clocal || cd) + break; + + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } + + DBGINFO(("%s block_til_ready wait\n", tty->driver->name)); + tty_unlock(tty); + schedule(); + tty_lock(tty); + } + + set_current_state(TASK_RUNNING); + remove_wait_queue(&port->open_wait, &wait); + + if (!tty_hung_up_p(filp)) + port->count++; + port->blocked_open--; + + if (!retval) + tty_port_set_active(port, 1); + + DBGINFO(("%s block_til_ready ready, rc=%d\n", tty->driver->name, retval)); + return retval; +} + +/* + * allocate buffers used for calling line discipline receive_buf + * directly in synchronous mode + * note: add 5 bytes to max frame size to allow appending + * 32-bit CRC and status byte when configured to do so + */ +static int alloc_tmp_rbuf(struct slgt_info *info) +{ + info->tmp_rbuf = kmalloc(info->max_frame_size + 5, GFP_KERNEL); + if (info->tmp_rbuf == NULL) + return -ENOMEM; + /* unused flag buffer to satisfy receive_buf calling interface */ + info->flag_buf = kzalloc(info->max_frame_size + 5, GFP_KERNEL); + if (!info->flag_buf) { + kfree(info->tmp_rbuf); + info->tmp_rbuf = NULL; + return -ENOMEM; + } + return 0; +} + +static void free_tmp_rbuf(struct slgt_info *info) +{ + kfree(info->tmp_rbuf); + info->tmp_rbuf = NULL; + kfree(info->flag_buf); + info->flag_buf = NULL; +} + +/* + * allocate DMA descriptor lists. + */ +static int alloc_desc(struct slgt_info *info) +{ + unsigned int i; + unsigned int pbufs; + + /* allocate memory to hold descriptor lists */ + info->bufs = dma_alloc_coherent(&info->pdev->dev, DESC_LIST_SIZE, + &info->bufs_dma_addr, GFP_KERNEL); + if (info->bufs == NULL) + return -ENOMEM; + + info->rbufs = (struct slgt_desc*)info->bufs; + info->tbufs = ((struct slgt_desc*)info->bufs) + info->rbuf_count; + + pbufs = (unsigned int)info->bufs_dma_addr; + + /* + * Build circular lists of descriptors + */ + + for (i=0; i < info->rbuf_count; i++) { + /* physical address of this descriptor */ + info->rbufs[i].pdesc = pbufs + (i * sizeof(struct slgt_desc)); + + /* physical address of next descriptor */ + if (i == info->rbuf_count - 1) + info->rbufs[i].next = cpu_to_le32(pbufs); + else + info->rbufs[i].next = cpu_to_le32(pbufs + ((i+1) * sizeof(struct slgt_desc))); + set_desc_count(info->rbufs[i], DMABUFSIZE); + } + + for (i=0; i < info->tbuf_count; i++) { + /* physical address of this descriptor */ + info->tbufs[i].pdesc = pbufs + ((info->rbuf_count + i) * sizeof(struct slgt_desc)); + + /* physical address of next descriptor */ + if (i == info->tbuf_count - 1) + info->tbufs[i].next = cpu_to_le32(pbufs + info->rbuf_count * sizeof(struct slgt_desc)); + else + info->tbufs[i].next = cpu_to_le32(pbufs + ((info->rbuf_count + i + 1) * sizeof(struct slgt_desc))); + } + + return 0; +} + +static void free_desc(struct slgt_info *info) +{ + if (info->bufs != NULL) { + dma_free_coherent(&info->pdev->dev, DESC_LIST_SIZE, + info->bufs, info->bufs_dma_addr); + info->bufs = NULL; + info->rbufs = NULL; + info->tbufs = NULL; + } +} + +static int alloc_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count) +{ + int i; + for (i=0; i < count; i++) { + bufs[i].buf = dma_alloc_coherent(&info->pdev->dev, DMABUFSIZE, + &bufs[i].buf_dma_addr, GFP_KERNEL); + if (!bufs[i].buf) + return -ENOMEM; + bufs[i].pbuf = cpu_to_le32((unsigned int)bufs[i].buf_dma_addr); + } + return 0; +} + +static void free_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count) +{ + int i; + for (i=0; i < count; i++) { + if (bufs[i].buf == NULL) + continue; + dma_free_coherent(&info->pdev->dev, DMABUFSIZE, bufs[i].buf, + bufs[i].buf_dma_addr); + bufs[i].buf = NULL; + } +} + +static int alloc_dma_bufs(struct slgt_info *info) +{ + info->rbuf_count = 32; + info->tbuf_count = 32; + + if (alloc_desc(info) < 0 || + alloc_bufs(info, info->rbufs, info->rbuf_count) < 0 || + alloc_bufs(info, info->tbufs, info->tbuf_count) < 0 || + alloc_tmp_rbuf(info) < 0) { + DBGERR(("%s DMA buffer alloc fail\n", info->device_name)); + return -ENOMEM; + } + reset_rbufs(info); + return 0; +} + +static void free_dma_bufs(struct slgt_info *info) +{ + if (info->bufs) { + free_bufs(info, info->rbufs, info->rbuf_count); + free_bufs(info, info->tbufs, info->tbuf_count); + free_desc(info); + } + free_tmp_rbuf(info); +} + +static int claim_resources(struct slgt_info *info) +{ + if (request_mem_region(info->phys_reg_addr, SLGT_REG_SIZE, "synclink_gt") == NULL) { + DBGERR(("%s reg addr conflict, addr=%08X\n", + info->device_name, info->phys_reg_addr)); + info->init_error = DiagStatus_AddressConflict; + goto errout; + } + else + info->reg_addr_requested = true; + + info->reg_addr = ioremap(info->phys_reg_addr, SLGT_REG_SIZE); + if (!info->reg_addr) { + DBGERR(("%s can't map device registers, addr=%08X\n", + info->device_name, info->phys_reg_addr)); + info->init_error = DiagStatus_CantAssignPciResources; + goto errout; + } + return 0; + +errout: + release_resources(info); + return -ENODEV; +} + +static void release_resources(struct slgt_info *info) +{ + if (info->irq_requested) { + free_irq(info->irq_level, info); + info->irq_requested = false; + } + + if (info->reg_addr_requested) { + release_mem_region(info->phys_reg_addr, SLGT_REG_SIZE); + info->reg_addr_requested = false; + } + + if (info->reg_addr) { + iounmap(info->reg_addr); + info->reg_addr = NULL; + } +} + +/* Add the specified device instance data structure to the + * global linked list of devices and increment the device count. + */ +static void add_device(struct slgt_info *info) +{ + char *devstr; + + info->next_device = NULL; + info->line = slgt_device_count; + sprintf(info->device_name, "%s%d", tty_dev_prefix, info->line); + + if (info->line < MAX_DEVICES) { + if (maxframe[info->line]) + info->max_frame_size = maxframe[info->line]; + } + + slgt_device_count++; + + if (!slgt_device_list) + slgt_device_list = info; + else { + struct slgt_info *current_dev = slgt_device_list; + while(current_dev->next_device) + current_dev = current_dev->next_device; + current_dev->next_device = info; + } + + if (info->max_frame_size < 4096) + info->max_frame_size = 4096; + else if (info->max_frame_size > 65535) + info->max_frame_size = 65535; + + switch(info->pdev->device) { + case SYNCLINK_GT_DEVICE_ID: + devstr = "GT"; + break; + case SYNCLINK_GT2_DEVICE_ID: + devstr = "GT2"; + break; + case SYNCLINK_GT4_DEVICE_ID: + devstr = "GT4"; + break; + case SYNCLINK_AC_DEVICE_ID: + devstr = "AC"; + info->params.mode = MGSL_MODE_ASYNC; + break; + default: + devstr = "(unknown model)"; + } + printk("SyncLink %s %s IO=%08x IRQ=%d MaxFrameSize=%u\n", + devstr, info->device_name, info->phys_reg_addr, + info->irq_level, info->max_frame_size); + +#if SYNCLINK_GENERIC_HDLC + hdlcdev_init(info); +#endif +} + +static const struct tty_port_operations slgt_port_ops = { + .carrier_raised = carrier_raised, + .dtr_rts = dtr_rts, +}; + +/* + * allocate device instance structure, return NULL on failure + */ +static struct slgt_info *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev) +{ + struct slgt_info *info; + + info = kzalloc(sizeof(struct slgt_info), GFP_KERNEL); + + if (!info) { + DBGERR(("%s device alloc failed adapter=%d port=%d\n", + driver_name, adapter_num, port_num)); + } else { + tty_port_init(&info->port); + info->port.ops = &slgt_port_ops; + info->magic = MGSL_MAGIC; + INIT_WORK(&info->task, bh_handler); + info->max_frame_size = 4096; + info->base_clock = 14745600; + info->rbuf_fill_level = DMABUFSIZE; + info->port.close_delay = 5*HZ/10; + info->port.closing_wait = 30*HZ; + init_waitqueue_head(&info->status_event_wait_q); + init_waitqueue_head(&info->event_wait_q); + spin_lock_init(&info->netlock); + memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS)); + info->idle_mode = HDLC_TXIDLE_FLAGS; + info->adapter_num = adapter_num; + info->port_num = port_num; + + timer_setup(&info->tx_timer, tx_timeout, 0); + timer_setup(&info->rx_timer, rx_timeout, 0); + + /* Copy configuration info to device instance data */ + info->pdev = pdev; + info->irq_level = pdev->irq; + info->phys_reg_addr = pci_resource_start(pdev,0); + + info->bus_type = MGSL_BUS_TYPE_PCI; + info->irq_flags = IRQF_SHARED; + + info->init_error = -1; /* assume error, set to 0 on successful init */ + } + + return info; +} + +static void device_init(int adapter_num, struct pci_dev *pdev) +{ + struct slgt_info *port_array[SLGT_MAX_PORTS]; + int i; + int port_count = 1; + + if (pdev->device == SYNCLINK_GT2_DEVICE_ID) + port_count = 2; + else if (pdev->device == SYNCLINK_GT4_DEVICE_ID) + port_count = 4; + + /* allocate device instances for all ports */ + for (i=0; i < port_count; ++i) { + port_array[i] = alloc_dev(adapter_num, i, pdev); + if (port_array[i] == NULL) { + for (--i; i >= 0; --i) { + tty_port_destroy(&port_array[i]->port); + kfree(port_array[i]); + } + return; + } + } + + /* give copy of port_array to all ports and add to device list */ + for (i=0; i < port_count; ++i) { + memcpy(port_array[i]->port_array, port_array, sizeof(port_array)); + add_device(port_array[i]); + port_array[i]->port_count = port_count; + spin_lock_init(&port_array[i]->lock); + } + + /* Allocate and claim adapter resources */ + if (!claim_resources(port_array[0])) { + + alloc_dma_bufs(port_array[0]); + + /* copy resource information from first port to others */ + for (i = 1; i < port_count; ++i) { + port_array[i]->irq_level = port_array[0]->irq_level; + port_array[i]->reg_addr = port_array[0]->reg_addr; + alloc_dma_bufs(port_array[i]); + } + + if (request_irq(port_array[0]->irq_level, + slgt_interrupt, + port_array[0]->irq_flags, + port_array[0]->device_name, + port_array[0]) < 0) { + DBGERR(("%s request_irq failed IRQ=%d\n", + port_array[0]->device_name, + port_array[0]->irq_level)); + } else { + port_array[0]->irq_requested = true; + adapter_test(port_array[0]); + for (i=1 ; i < port_count ; i++) { + port_array[i]->init_error = port_array[0]->init_error; + port_array[i]->gpio_present = port_array[0]->gpio_present; + } + } + } + + for (i = 0; i < port_count; ++i) { + struct slgt_info *info = port_array[i]; + tty_port_register_device(&info->port, serial_driver, info->line, + &info->pdev->dev); + } +} + +static int init_one(struct pci_dev *dev, + const struct pci_device_id *ent) +{ + if (pci_enable_device(dev)) { + printk("error enabling pci device %p\n", dev); + return -EIO; + } + pci_set_master(dev); + device_init(slgt_device_count, dev); + return 0; +} + +static void remove_one(struct pci_dev *dev) +{ +} + +static const struct tty_operations ops = { + .open = open, + .close = close, + .write = write, + .put_char = put_char, + .flush_chars = flush_chars, + .write_room = write_room, + .chars_in_buffer = chars_in_buffer, + .flush_buffer = flush_buffer, + .ioctl = ioctl, + .compat_ioctl = slgt_compat_ioctl, + .throttle = throttle, + .unthrottle = unthrottle, + .send_xchar = send_xchar, + .break_ctl = set_break, + .wait_until_sent = wait_until_sent, + .set_termios = set_termios, + .stop = tx_hold, + .start = tx_release, + .hangup = hangup, + .tiocmget = tiocmget, + .tiocmset = tiocmset, + .get_icount = get_icount, + .proc_show = synclink_gt_proc_show, +}; + +static void slgt_cleanup(void) +{ + int rc; + struct slgt_info *info; + struct slgt_info *tmp; + + printk(KERN_INFO "unload %s\n", driver_name); + + if (serial_driver) { + for (info=slgt_device_list ; info != NULL ; info=info->next_device) + tty_unregister_device(serial_driver, info->line); + rc = tty_unregister_driver(serial_driver); + if (rc) + DBGERR(("tty_unregister_driver error=%d\n", rc)); + put_tty_driver(serial_driver); + } + + /* reset devices */ + info = slgt_device_list; + while(info) { + reset_port(info); + info = info->next_device; + } + + /* release devices */ + info = slgt_device_list; + while(info) { +#if SYNCLINK_GENERIC_HDLC + hdlcdev_exit(info); +#endif + free_dma_bufs(info); + free_tmp_rbuf(info); + if (info->port_num == 0) + release_resources(info); + tmp = info; + info = info->next_device; + tty_port_destroy(&tmp->port); + kfree(tmp); + } + + if (pci_registered) + pci_unregister_driver(&pci_driver); +} + +/* + * Driver initialization entry point. + */ +static int __init slgt_init(void) +{ + int rc; + + printk(KERN_INFO "%s\n", driver_name); + + serial_driver = alloc_tty_driver(MAX_DEVICES); + if (!serial_driver) { + printk("%s can't allocate tty driver\n", driver_name); + return -ENOMEM; + } + + /* Initialize the tty_driver structure */ + + serial_driver->driver_name = slgt_driver_name; + serial_driver->name = tty_dev_prefix; + serial_driver->major = ttymajor; + serial_driver->minor_start = 64; + serial_driver->type = TTY_DRIVER_TYPE_SERIAL; + serial_driver->subtype = SERIAL_TYPE_NORMAL; + serial_driver->init_termios = tty_std_termios; + serial_driver->init_termios.c_cflag = + B9600 | CS8 | CREAD | HUPCL | CLOCAL; + serial_driver->init_termios.c_ispeed = 9600; + serial_driver->init_termios.c_ospeed = 9600; + serial_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; + tty_set_operations(serial_driver, &ops); + if ((rc = tty_register_driver(serial_driver)) < 0) { + DBGERR(("%s can't register serial driver\n", driver_name)); + put_tty_driver(serial_driver); + serial_driver = NULL; + goto error; + } + + printk(KERN_INFO "%s, tty major#%d\n", + driver_name, serial_driver->major); + + slgt_device_count = 0; + if ((rc = pci_register_driver(&pci_driver)) < 0) { + printk("%s pci_register_driver error=%d\n", driver_name, rc); + goto error; + } + pci_registered = true; + + if (!slgt_device_list) + printk("%s no devices found\n",driver_name); + + return 0; + +error: + slgt_cleanup(); + return rc; +} + +static void __exit slgt_exit(void) +{ + slgt_cleanup(); +} + +module_init(slgt_init); +module_exit(slgt_exit); + +/* + * register access routines + */ + +#define CALC_REGADDR() \ + unsigned long reg_addr = ((unsigned long)info->reg_addr) + addr; \ + if (addr >= 0x80) \ + reg_addr += (info->port_num) * 32; \ + else if (addr >= 0x40) \ + reg_addr += (info->port_num) * 16; + +static __u8 rd_reg8(struct slgt_info *info, unsigned int addr) +{ + CALC_REGADDR(); + return readb((void __iomem *)reg_addr); +} + +static void wr_reg8(struct slgt_info *info, unsigned int addr, __u8 value) +{ + CALC_REGADDR(); + writeb(value, (void __iomem *)reg_addr); +} + +static __u16 rd_reg16(struct slgt_info *info, unsigned int addr) +{ + CALC_REGADDR(); + return readw((void __iomem *)reg_addr); +} + +static void wr_reg16(struct slgt_info *info, unsigned int addr, __u16 value) +{ + CALC_REGADDR(); + writew(value, (void __iomem *)reg_addr); +} + +static __u32 rd_reg32(struct slgt_info *info, unsigned int addr) +{ + CALC_REGADDR(); + return readl((void __iomem *)reg_addr); +} + +static void wr_reg32(struct slgt_info *info, unsigned int addr, __u32 value) +{ + CALC_REGADDR(); + writel(value, (void __iomem *)reg_addr); +} + +static void rdma_reset(struct slgt_info *info) +{ + unsigned int i; + + /* set reset bit */ + wr_reg32(info, RDCSR, BIT1); + + /* wait for enable bit cleared */ + for(i=0 ; i < 1000 ; i++) + if (!(rd_reg32(info, RDCSR) & BIT0)) + break; +} + +static void tdma_reset(struct slgt_info *info) +{ + unsigned int i; + + /* set reset bit */ + wr_reg32(info, TDCSR, BIT1); + + /* wait for enable bit cleared */ + for(i=0 ; i < 1000 ; i++) + if (!(rd_reg32(info, TDCSR) & BIT0)) + break; +} + +/* + * enable internal loopback + * TxCLK and RxCLK are generated from BRG + * and TxD is looped back to RxD internally. + */ +static void enable_loopback(struct slgt_info *info) +{ + /* SCR (serial control) BIT2=loopback enable */ + wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) | BIT2)); + + if (info->params.mode != MGSL_MODE_ASYNC) { + /* CCR (clock control) + * 07..05 tx clock source (010 = BRG) + * 04..02 rx clock source (010 = BRG) + * 01 auxclk enable (0 = disable) + * 00 BRG enable (1 = enable) + * + * 0100 1001 + */ + wr_reg8(info, CCR, 0x49); + + /* set speed if available, otherwise use default */ + if (info->params.clock_speed) + set_rate(info, info->params.clock_speed); + else + set_rate(info, 3686400); + } +} + +/* + * set baud rate generator to specified rate + */ +static void set_rate(struct slgt_info *info, u32 rate) +{ + unsigned int div; + unsigned int osc = info->base_clock; + + /* div = osc/rate - 1 + * + * Round div up if osc/rate is not integer to + * force to next slowest rate. + */ + + if (rate) { + div = osc/rate; + if (!(osc % rate) && div) + div--; + wr_reg16(info, BDR, (unsigned short)div); + } +} + +static void rx_stop(struct slgt_info *info) +{ + unsigned short val; + + /* disable and reset receiver */ + val = rd_reg16(info, RCR) & ~BIT1; /* clear enable bit */ + wr_reg16(info, RCR, (unsigned short)(val | BIT2)); /* set reset bit */ + wr_reg16(info, RCR, val); /* clear reset bit */ + + slgt_irq_off(info, IRQ_RXOVER + IRQ_RXDATA + IRQ_RXIDLE); + + /* clear pending rx interrupts */ + wr_reg16(info, SSR, IRQ_RXIDLE + IRQ_RXOVER); + + rdma_reset(info); + + info->rx_enabled = false; + info->rx_restart = false; +} + +static void rx_start(struct slgt_info *info) +{ + unsigned short val; + + slgt_irq_off(info, IRQ_RXOVER + IRQ_RXDATA); + + /* clear pending rx overrun IRQ */ + wr_reg16(info, SSR, IRQ_RXOVER); + + /* reset and disable receiver */ + val = rd_reg16(info, RCR) & ~BIT1; /* clear enable bit */ + wr_reg16(info, RCR, (unsigned short)(val | BIT2)); /* set reset bit */ + wr_reg16(info, RCR, val); /* clear reset bit */ + + rdma_reset(info); + reset_rbufs(info); + + if (info->rx_pio) { + /* rx request when rx FIFO not empty */ + wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) & ~BIT14)); + slgt_irq_on(info, IRQ_RXDATA); + if (info->params.mode == MGSL_MODE_ASYNC) { + /* enable saving of rx status */ + wr_reg32(info, RDCSR, BIT6); + } + } else { + /* rx request when rx FIFO half full */ + wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) | BIT14)); + /* set 1st descriptor address */ + wr_reg32(info, RDDAR, info->rbufs[0].pdesc); + + if (info->params.mode != MGSL_MODE_ASYNC) { + /* enable rx DMA and DMA interrupt */ + wr_reg32(info, RDCSR, (BIT2 + BIT0)); + } else { + /* enable saving of rx status, rx DMA and DMA interrupt */ + wr_reg32(info, RDCSR, (BIT6 + BIT2 + BIT0)); + } + } + + slgt_irq_on(info, IRQ_RXOVER); + + /* enable receiver */ + wr_reg16(info, RCR, (unsigned short)(rd_reg16(info, RCR) | BIT1)); + + info->rx_restart = false; + info->rx_enabled = true; +} + +static void tx_start(struct slgt_info *info) +{ + if (!info->tx_enabled) { + wr_reg16(info, TCR, + (unsigned short)((rd_reg16(info, TCR) | BIT1) & ~BIT2)); + info->tx_enabled = true; + } + + if (desc_count(info->tbufs[info->tbuf_start])) { + info->drop_rts_on_tx_done = false; + + if (info->params.mode != MGSL_MODE_ASYNC) { + if (info->params.flags & HDLC_FLAG_AUTO_RTS) { + get_gtsignals(info); + if (!(info->signals & SerialSignal_RTS)) { + info->signals |= SerialSignal_RTS; + set_gtsignals(info); + info->drop_rts_on_tx_done = true; + } + } + + slgt_irq_off(info, IRQ_TXDATA); + slgt_irq_on(info, IRQ_TXUNDER + IRQ_TXIDLE); + /* clear tx idle and underrun status bits */ + wr_reg16(info, SSR, (unsigned short)(IRQ_TXIDLE + IRQ_TXUNDER)); + } else { + slgt_irq_off(info, IRQ_TXDATA); + slgt_irq_on(info, IRQ_TXIDLE); + /* clear tx idle status bit */ + wr_reg16(info, SSR, IRQ_TXIDLE); + } + /* set 1st descriptor address and start DMA */ + wr_reg32(info, TDDAR, info->tbufs[info->tbuf_start].pdesc); + wr_reg32(info, TDCSR, BIT2 + BIT0); + info->tx_active = true; + } +} + +static void tx_stop(struct slgt_info *info) +{ + unsigned short val; + + del_timer(&info->tx_timer); + + tdma_reset(info); + + /* reset and disable transmitter */ + val = rd_reg16(info, TCR) & ~BIT1; /* clear enable bit */ + wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */ + + slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER); + + /* clear tx idle and underrun status bit */ + wr_reg16(info, SSR, (unsigned short)(IRQ_TXIDLE + IRQ_TXUNDER)); + + reset_tbufs(info); + + info->tx_enabled = false; + info->tx_active = false; +} + +static void reset_port(struct slgt_info *info) +{ + if (!info->reg_addr) + return; + + tx_stop(info); + rx_stop(info); + + info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR); + set_gtsignals(info); + + slgt_irq_off(info, IRQ_ALL | IRQ_MASTER); +} + +static void reset_adapter(struct slgt_info *info) +{ + int i; + for (i=0; i < info->port_count; ++i) { + if (info->port_array[i]) + reset_port(info->port_array[i]); + } +} + +static void async_mode(struct slgt_info *info) +{ + unsigned short val; + + slgt_irq_off(info, IRQ_ALL | IRQ_MASTER); + tx_stop(info); + rx_stop(info); + + /* TCR (tx control) + * + * 15..13 mode, 010=async + * 12..10 encoding, 000=NRZ + * 09 parity enable + * 08 1=odd parity, 0=even parity + * 07 1=RTS driver control + * 06 1=break enable + * 05..04 character length + * 00=5 bits + * 01=6 bits + * 10=7 bits + * 11=8 bits + * 03 0=1 stop bit, 1=2 stop bits + * 02 reset + * 01 enable + * 00 auto-CTS enable + */ + val = 0x4000; + + if (info->if_mode & MGSL_INTERFACE_RTS_EN) + val |= BIT7; + + if (info->params.parity != ASYNC_PARITY_NONE) { + val |= BIT9; + if (info->params.parity == ASYNC_PARITY_ODD) + val |= BIT8; + } + + switch (info->params.data_bits) + { + case 6: val |= BIT4; break; + case 7: val |= BIT5; break; + case 8: val |= BIT5 + BIT4; break; + } + + if (info->params.stop_bits != 1) + val |= BIT3; + + if (info->params.flags & HDLC_FLAG_AUTO_CTS) + val |= BIT0; + + wr_reg16(info, TCR, val); + + /* RCR (rx control) + * + * 15..13 mode, 010=async + * 12..10 encoding, 000=NRZ + * 09 parity enable + * 08 1=odd parity, 0=even parity + * 07..06 reserved, must be 0 + * 05..04 character length + * 00=5 bits + * 01=6 bits + * 10=7 bits + * 11=8 bits + * 03 reserved, must be zero + * 02 reset + * 01 enable + * 00 auto-DCD enable + */ + val = 0x4000; + + if (info->params.parity != ASYNC_PARITY_NONE) { + val |= BIT9; + if (info->params.parity == ASYNC_PARITY_ODD) + val |= BIT8; + } + + switch (info->params.data_bits) + { + case 6: val |= BIT4; break; + case 7: val |= BIT5; break; + case 8: val |= BIT5 + BIT4; break; + } + + if (info->params.flags & HDLC_FLAG_AUTO_DCD) + val |= BIT0; + + wr_reg16(info, RCR, val); + + /* CCR (clock control) + * + * 07..05 011 = tx clock source is BRG/16 + * 04..02 010 = rx clock source is BRG + * 01 0 = auxclk disabled + * 00 1 = BRG enabled + * + * 0110 1001 + */ + wr_reg8(info, CCR, 0x69); + + msc_set_vcr(info); + + /* SCR (serial control) + * + * 15 1=tx req on FIFO half empty + * 14 1=rx req on FIFO half full + * 13 tx data IRQ enable + * 12 tx idle IRQ enable + * 11 rx break on IRQ enable + * 10 rx data IRQ enable + * 09 rx break off IRQ enable + * 08 overrun IRQ enable + * 07 DSR IRQ enable + * 06 CTS IRQ enable + * 05 DCD IRQ enable + * 04 RI IRQ enable + * 03 0=16x sampling, 1=8x sampling + * 02 1=txd->rxd internal loopback enable + * 01 reserved, must be zero + * 00 1=master IRQ enable + */ + val = BIT15 + BIT14 + BIT0; + /* JCR[8] : 1 = x8 async mode feature available */ + if ((rd_reg32(info, JCR) & BIT8) && info->params.data_rate && + ((info->base_clock < (info->params.data_rate * 16)) || + (info->base_clock % (info->params.data_rate * 16)))) { + /* use 8x sampling */ + val |= BIT3; + set_rate(info, info->params.data_rate * 8); + } else { + /* use 16x sampling */ + set_rate(info, info->params.data_rate * 16); + } + wr_reg16(info, SCR, val); + + slgt_irq_on(info, IRQ_RXBREAK | IRQ_RXOVER); + + if (info->params.loopback) + enable_loopback(info); +} + +static void sync_mode(struct slgt_info *info) +{ + unsigned short val; + + slgt_irq_off(info, IRQ_ALL | IRQ_MASTER); + tx_stop(info); + rx_stop(info); + + /* TCR (tx control) + * + * 15..13 mode + * 000=HDLC/SDLC + * 001=raw bit synchronous + * 010=asynchronous/isochronous + * 011=monosync byte synchronous + * 100=bisync byte synchronous + * 101=xsync byte synchronous + * 12..10 encoding + * 09 CRC enable + * 08 CRC32 + * 07 1=RTS driver control + * 06 preamble enable + * 05..04 preamble length + * 03 share open/close flag + * 02 reset + * 01 enable + * 00 auto-CTS enable + */ + val = BIT2; + + switch(info->params.mode) { + case MGSL_MODE_XSYNC: + val |= BIT15 + BIT13; + break; + case MGSL_MODE_MONOSYNC: val |= BIT14 + BIT13; break; + case MGSL_MODE_BISYNC: val |= BIT15; break; + case MGSL_MODE_RAW: val |= BIT13; break; + } + if (info->if_mode & MGSL_INTERFACE_RTS_EN) + val |= BIT7; + + switch(info->params.encoding) + { + case HDLC_ENCODING_NRZB: val |= BIT10; break; + case HDLC_ENCODING_NRZI_MARK: val |= BIT11; break; + case HDLC_ENCODING_NRZI: val |= BIT11 + BIT10; break; + case HDLC_ENCODING_BIPHASE_MARK: val |= BIT12; break; + case HDLC_ENCODING_BIPHASE_SPACE: val |= BIT12 + BIT10; break; + case HDLC_ENCODING_BIPHASE_LEVEL: val |= BIT12 + BIT11; break; + case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break; + } + + switch (info->params.crc_type & HDLC_CRC_MASK) + { + case HDLC_CRC_16_CCITT: val |= BIT9; break; + case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break; + } + + if (info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE) + val |= BIT6; + + switch (info->params.preamble_length) + { + case HDLC_PREAMBLE_LENGTH_16BITS: val |= BIT5; break; + case HDLC_PREAMBLE_LENGTH_32BITS: val |= BIT4; break; + case HDLC_PREAMBLE_LENGTH_64BITS: val |= BIT5 + BIT4; break; + } + + if (info->params.flags & HDLC_FLAG_AUTO_CTS) + val |= BIT0; + + wr_reg16(info, TCR, val); + + /* TPR (transmit preamble) */ + + switch (info->params.preamble) + { + case HDLC_PREAMBLE_PATTERN_FLAGS: val = 0x7e; break; + case HDLC_PREAMBLE_PATTERN_ONES: val = 0xff; break; + case HDLC_PREAMBLE_PATTERN_ZEROS: val = 0x00; break; + case HDLC_PREAMBLE_PATTERN_10: val = 0x55; break; + case HDLC_PREAMBLE_PATTERN_01: val = 0xaa; break; + default: val = 0x7e; break; + } + wr_reg8(info, TPR, (unsigned char)val); + + /* RCR (rx control) + * + * 15..13 mode + * 000=HDLC/SDLC + * 001=raw bit synchronous + * 010=asynchronous/isochronous + * 011=monosync byte synchronous + * 100=bisync byte synchronous + * 101=xsync byte synchronous + * 12..10 encoding + * 09 CRC enable + * 08 CRC32 + * 07..03 reserved, must be 0 + * 02 reset + * 01 enable + * 00 auto-DCD enable + */ + val = 0; + + switch(info->params.mode) { + case MGSL_MODE_XSYNC: + val |= BIT15 + BIT13; + break; + case MGSL_MODE_MONOSYNC: val |= BIT14 + BIT13; break; + case MGSL_MODE_BISYNC: val |= BIT15; break; + case MGSL_MODE_RAW: val |= BIT13; break; + } + + switch(info->params.encoding) + { + case HDLC_ENCODING_NRZB: val |= BIT10; break; + case HDLC_ENCODING_NRZI_MARK: val |= BIT11; break; + case HDLC_ENCODING_NRZI: val |= BIT11 + BIT10; break; + case HDLC_ENCODING_BIPHASE_MARK: val |= BIT12; break; + case HDLC_ENCODING_BIPHASE_SPACE: val |= BIT12 + BIT10; break; + case HDLC_ENCODING_BIPHASE_LEVEL: val |= BIT12 + BIT11; break; + case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break; + } + + switch (info->params.crc_type & HDLC_CRC_MASK) + { + case HDLC_CRC_16_CCITT: val |= BIT9; break; + case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break; + } + + if (info->params.flags & HDLC_FLAG_AUTO_DCD) + val |= BIT0; + + wr_reg16(info, RCR, val); + + /* CCR (clock control) + * + * 07..05 tx clock source + * 04..02 rx clock source + * 01 auxclk enable + * 00 BRG enable + */ + val = 0; + + if (info->params.flags & HDLC_FLAG_TXC_BRG) + { + // when RxC source is DPLL, BRG generates 16X DPLL + // reference clock, so take TxC from BRG/16 to get + // transmit clock at actual data rate + if (info->params.flags & HDLC_FLAG_RXC_DPLL) + val |= BIT6 + BIT5; /* 011, txclk = BRG/16 */ + else + val |= BIT6; /* 010, txclk = BRG */ + } + else if (info->params.flags & HDLC_FLAG_TXC_DPLL) + val |= BIT7; /* 100, txclk = DPLL Input */ + else if (info->params.flags & HDLC_FLAG_TXC_RXCPIN) + val |= BIT5; /* 001, txclk = RXC Input */ + + if (info->params.flags & HDLC_FLAG_RXC_BRG) + val |= BIT3; /* 010, rxclk = BRG */ + else if (info->params.flags & HDLC_FLAG_RXC_DPLL) + val |= BIT4; /* 100, rxclk = DPLL */ + else if (info->params.flags & HDLC_FLAG_RXC_TXCPIN) + val |= BIT2; /* 001, rxclk = TXC Input */ + + if (info->params.clock_speed) + val |= BIT1 + BIT0; + + wr_reg8(info, CCR, (unsigned char)val); + + if (info->params.flags & (HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL)) + { + // program DPLL mode + switch(info->params.encoding) + { + case HDLC_ENCODING_BIPHASE_MARK: + case HDLC_ENCODING_BIPHASE_SPACE: + val = BIT7; break; + case HDLC_ENCODING_BIPHASE_LEVEL: + case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: + val = BIT7 + BIT6; break; + default: val = BIT6; // NRZ encodings + } + wr_reg16(info, RCR, (unsigned short)(rd_reg16(info, RCR) | val)); + + // DPLL requires a 16X reference clock from BRG + set_rate(info, info->params.clock_speed * 16); + } + else + set_rate(info, info->params.clock_speed); + + tx_set_idle(info); + + msc_set_vcr(info); + + /* SCR (serial control) + * + * 15 1=tx req on FIFO half empty + * 14 1=rx req on FIFO half full + * 13 tx data IRQ enable + * 12 tx idle IRQ enable + * 11 underrun IRQ enable + * 10 rx data IRQ enable + * 09 rx idle IRQ enable + * 08 overrun IRQ enable + * 07 DSR IRQ enable + * 06 CTS IRQ enable + * 05 DCD IRQ enable + * 04 RI IRQ enable + * 03 reserved, must be zero + * 02 1=txd->rxd internal loopback enable + * 01 reserved, must be zero + * 00 1=master IRQ enable + */ + wr_reg16(info, SCR, BIT15 + BIT14 + BIT0); + + if (info->params.loopback) + enable_loopback(info); +} + +/* + * set transmit idle mode + */ +static void tx_set_idle(struct slgt_info *info) +{ + unsigned char val; + unsigned short tcr; + + /* if preamble enabled (tcr[6] == 1) then tx idle size = 8 bits + * else tcr[5:4] = tx idle size: 00 = 8 bits, 01 = 16 bits + */ + tcr = rd_reg16(info, TCR); + if (info->idle_mode & HDLC_TXIDLE_CUSTOM_16) { + /* disable preamble, set idle size to 16 bits */ + tcr = (tcr & ~(BIT6 + BIT5)) | BIT4; + /* MSB of 16 bit idle specified in tx preamble register (TPR) */ + wr_reg8(info, TPR, (unsigned char)((info->idle_mode >> 8) & 0xff)); + } else if (!(tcr & BIT6)) { + /* preamble is disabled, set idle size to 8 bits */ + tcr &= ~(BIT5 + BIT4); + } + wr_reg16(info, TCR, tcr); + + if (info->idle_mode & (HDLC_TXIDLE_CUSTOM_8 | HDLC_TXIDLE_CUSTOM_16)) { + /* LSB of custom tx idle specified in tx idle register */ + val = (unsigned char)(info->idle_mode & 0xff); + } else { + /* standard 8 bit idle patterns */ + switch(info->idle_mode) + { + case HDLC_TXIDLE_FLAGS: val = 0x7e; break; + case HDLC_TXIDLE_ALT_ZEROS_ONES: + case HDLC_TXIDLE_ALT_MARK_SPACE: val = 0xaa; break; + case HDLC_TXIDLE_ZEROS: + case HDLC_TXIDLE_SPACE: val = 0x00; break; + default: val = 0xff; + } + } + + wr_reg8(info, TIR, val); +} + +/* + * get state of V24 status (input) signals + */ +static void get_gtsignals(struct slgt_info *info) +{ + unsigned short status = rd_reg16(info, SSR); + + /* clear all serial signals except RTS and DTR */ + info->signals &= SerialSignal_RTS | SerialSignal_DTR; + + if (status & BIT3) + info->signals |= SerialSignal_DSR; + if (status & BIT2) + info->signals |= SerialSignal_CTS; + if (status & BIT1) + info->signals |= SerialSignal_DCD; + if (status & BIT0) + info->signals |= SerialSignal_RI; +} + +/* + * set V.24 Control Register based on current configuration + */ +static void msc_set_vcr(struct slgt_info *info) +{ + unsigned char val = 0; + + /* VCR (V.24 control) + * + * 07..04 serial IF select + * 03 DTR + * 02 RTS + * 01 LL + * 00 RL + */ + + switch(info->if_mode & MGSL_INTERFACE_MASK) + { + case MGSL_INTERFACE_RS232: + val |= BIT5; /* 0010 */ + break; + case MGSL_INTERFACE_V35: + val |= BIT7 + BIT6 + BIT5; /* 1110 */ + break; + case MGSL_INTERFACE_RS422: + val |= BIT6; /* 0100 */ + break; + } + + if (info->if_mode & MGSL_INTERFACE_MSB_FIRST) + val |= BIT4; + if (info->signals & SerialSignal_DTR) + val |= BIT3; + if (info->signals & SerialSignal_RTS) + val |= BIT2; + if (info->if_mode & MGSL_INTERFACE_LL) + val |= BIT1; + if (info->if_mode & MGSL_INTERFACE_RL) + val |= BIT0; + wr_reg8(info, VCR, val); +} + +/* + * set state of V24 control (output) signals + */ +static void set_gtsignals(struct slgt_info *info) +{ + unsigned char val = rd_reg8(info, VCR); + if (info->signals & SerialSignal_DTR) + val |= BIT3; + else + val &= ~BIT3; + if (info->signals & SerialSignal_RTS) + val |= BIT2; + else + val &= ~BIT2; + wr_reg8(info, VCR, val); +} + +/* + * free range of receive DMA buffers (i to last) + */ +static void free_rbufs(struct slgt_info *info, unsigned int i, unsigned int last) +{ + int done = 0; + + while(!done) { + /* reset current buffer for reuse */ + info->rbufs[i].status = 0; + set_desc_count(info->rbufs[i], info->rbuf_fill_level); + if (i == last) + done = 1; + if (++i == info->rbuf_count) + i = 0; + } + info->rbuf_current = i; +} + +/* + * mark all receive DMA buffers as free + */ +static void reset_rbufs(struct slgt_info *info) +{ + free_rbufs(info, 0, info->rbuf_count - 1); + info->rbuf_fill_index = 0; + info->rbuf_fill_count = 0; +} + +/* + * pass receive HDLC frame to upper layer + * + * return true if frame available, otherwise false + */ +static bool rx_get_frame(struct slgt_info *info) +{ + unsigned int start, end; + unsigned short status; + unsigned int framesize = 0; + unsigned long flags; + struct tty_struct *tty = info->port.tty; + unsigned char addr_field = 0xff; + unsigned int crc_size = 0; + + switch (info->params.crc_type & HDLC_CRC_MASK) { + case HDLC_CRC_16_CCITT: crc_size = 2; break; + case HDLC_CRC_32_CCITT: crc_size = 4; break; + } + +check_again: + + framesize = 0; + addr_field = 0xff; + start = end = info->rbuf_current; + + for (;;) { + if (!desc_complete(info->rbufs[end])) + goto cleanup; + + if (framesize == 0 && info->params.addr_filter != 0xff) + addr_field = info->rbufs[end].buf[0]; + + framesize += desc_count(info->rbufs[end]); + + if (desc_eof(info->rbufs[end])) + break; + + if (++end == info->rbuf_count) + end = 0; + + if (end == info->rbuf_current) { + if (info->rx_enabled){ + spin_lock_irqsave(&info->lock,flags); + rx_start(info); + spin_unlock_irqrestore(&info->lock,flags); + } + goto cleanup; + } + } + + /* status + * + * 15 buffer complete + * 14..06 reserved + * 05..04 residue + * 02 eof (end of frame) + * 01 CRC error + * 00 abort + */ + status = desc_status(info->rbufs[end]); + + /* ignore CRC bit if not using CRC (bit is undefined) */ + if ((info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_NONE) + status &= ~BIT1; + + if (framesize == 0 || + (addr_field != 0xff && addr_field != info->params.addr_filter)) { + free_rbufs(info, start, end); + goto check_again; + } + + if (framesize < (2 + crc_size) || status & BIT0) { + info->icount.rxshort++; + framesize = 0; + } else if (status & BIT1) { + info->icount.rxcrc++; + if (!(info->params.crc_type & HDLC_CRC_RETURN_EX)) + framesize = 0; + } + +#if SYNCLINK_GENERIC_HDLC + if (framesize == 0) { + info->netdev->stats.rx_errors++; + info->netdev->stats.rx_frame_errors++; + } +#endif + + DBGBH(("%s rx frame status=%04X size=%d\n", + info->device_name, status, framesize)); + DBGDATA(info, info->rbufs[start].buf, min_t(int, framesize, info->rbuf_fill_level), "rx"); + + if (framesize) { + if (!(info->params.crc_type & HDLC_CRC_RETURN_EX)) { + framesize -= crc_size; + crc_size = 0; + } + + if (framesize > info->max_frame_size + crc_size) + info->icount.rxlong++; + else { + /* copy dma buffer(s) to contiguous temp buffer */ + int copy_count = framesize; + int i = start; + unsigned char *p = info->tmp_rbuf; + info->tmp_rbuf_count = framesize; + + info->icount.rxok++; + + while(copy_count) { + int partial_count = min_t(int, copy_count, info->rbuf_fill_level); + memcpy(p, info->rbufs[i].buf, partial_count); + p += partial_count; + copy_count -= partial_count; + if (++i == info->rbuf_count) + i = 0; + } + + if (info->params.crc_type & HDLC_CRC_RETURN_EX) { + *p = (status & BIT1) ? RX_CRC_ERROR : RX_OK; + framesize++; + } + +#if SYNCLINK_GENERIC_HDLC + if (info->netcount) + hdlcdev_rx(info,info->tmp_rbuf, framesize); + else +#endif + ldisc_receive_buf(tty, info->tmp_rbuf, info->flag_buf, framesize); + } + } + free_rbufs(info, start, end); + return true; + +cleanup: + return false; +} + +/* + * pass receive buffer (RAW synchronous mode) to tty layer + * return true if buffer available, otherwise false + */ +static bool rx_get_buf(struct slgt_info *info) +{ + unsigned int i = info->rbuf_current; + unsigned int count; + + if (!desc_complete(info->rbufs[i])) + return false; + count = desc_count(info->rbufs[i]); + switch(info->params.mode) { + case MGSL_MODE_MONOSYNC: + case MGSL_MODE_BISYNC: + case MGSL_MODE_XSYNC: + /* ignore residue in byte synchronous modes */ + if (desc_residue(info->rbufs[i])) + count--; + break; + } + DBGDATA(info, info->rbufs[i].buf, count, "rx"); + DBGINFO(("rx_get_buf size=%d\n", count)); + if (count) + ldisc_receive_buf(info->port.tty, info->rbufs[i].buf, + info->flag_buf, count); + free_rbufs(info, i, i); + return true; +} + +static void reset_tbufs(struct slgt_info *info) +{ + unsigned int i; + info->tbuf_current = 0; + for (i=0 ; i < info->tbuf_count ; i++) { + info->tbufs[i].status = 0; + info->tbufs[i].count = 0; + } +} + +/* + * return number of free transmit DMA buffers + */ +static unsigned int free_tbuf_count(struct slgt_info *info) +{ + unsigned int count = 0; + unsigned int i = info->tbuf_current; + + do + { + if (desc_count(info->tbufs[i])) + break; /* buffer in use */ + ++count; + if (++i == info->tbuf_count) + i=0; + } while (i != info->tbuf_current); + + /* if tx DMA active, last zero count buffer is in use */ + if (count && (rd_reg32(info, TDCSR) & BIT0)) + --count; + + return count; +} + +/* + * return number of bytes in unsent transmit DMA buffers + * and the serial controller tx FIFO + */ +static unsigned int tbuf_bytes(struct slgt_info *info) +{ + unsigned int total_count = 0; + unsigned int i = info->tbuf_current; + unsigned int reg_value; + unsigned int count; + unsigned int active_buf_count = 0; + + /* + * Add descriptor counts for all tx DMA buffers. + * If count is zero (cleared by DMA controller after read), + * the buffer is complete or is actively being read from. + * + * Record buf_count of last buffer with zero count starting + * from current ring position. buf_count is mirror + * copy of count and is not cleared by serial controller. + * If DMA controller is active, that buffer is actively + * being read so add to total. + */ + do { + count = desc_count(info->tbufs[i]); + if (count) + total_count += count; + else if (!total_count) + active_buf_count = info->tbufs[i].buf_count; + if (++i == info->tbuf_count) + i = 0; + } while (i != info->tbuf_current); + + /* read tx DMA status register */ + reg_value = rd_reg32(info, TDCSR); + + /* if tx DMA active, last zero count buffer is in use */ + if (reg_value & BIT0) + total_count += active_buf_count; + + /* add tx FIFO count = reg_value[15..8] */ + total_count += (reg_value >> 8) & 0xff; + + /* if transmitter active add one byte for shift register */ + if (info->tx_active) + total_count++; + + return total_count; +} + +/* + * load data into transmit DMA buffer ring and start transmitter if needed + * return true if data accepted, otherwise false (buffers full) + */ +static bool tx_load(struct slgt_info *info, const char *buf, unsigned int size) +{ + unsigned short count; + unsigned int i; + struct slgt_desc *d; + + /* check required buffer space */ + if (DIV_ROUND_UP(size, DMABUFSIZE) > free_tbuf_count(info)) + return false; + + DBGDATA(info, buf, size, "tx"); + + /* + * copy data to one or more DMA buffers in circular ring + * tbuf_start = first buffer for this data + * tbuf_current = next free buffer + * + * Copy all data before making data visible to DMA controller by + * setting descriptor count of the first buffer. + * This prevents an active DMA controller from reading the first DMA + * buffers of a frame and stopping before the final buffers are filled. + */ + + info->tbuf_start = i = info->tbuf_current; + + while (size) { + d = &info->tbufs[i]; + + count = (unsigned short)((size > DMABUFSIZE) ? DMABUFSIZE : size); + memcpy(d->buf, buf, count); + + size -= count; + buf += count; + + /* + * set EOF bit for last buffer of HDLC frame or + * for every buffer in raw mode + */ + if ((!size && info->params.mode == MGSL_MODE_HDLC) || + info->params.mode == MGSL_MODE_RAW) + set_desc_eof(*d, 1); + else + set_desc_eof(*d, 0); + + /* set descriptor count for all but first buffer */ + if (i != info->tbuf_start) + set_desc_count(*d, count); + d->buf_count = count; + + if (++i == info->tbuf_count) + i = 0; + } + + info->tbuf_current = i; + + /* set first buffer count to make new data visible to DMA controller */ + d = &info->tbufs[info->tbuf_start]; + set_desc_count(*d, d->buf_count); + + /* start transmitter if needed and update transmit timeout */ + if (!info->tx_active) + tx_start(info); + update_tx_timer(info); + + return true; +} + +static int register_test(struct slgt_info *info) +{ + static unsigned short patterns[] = + {0x0000, 0xffff, 0xaaaa, 0x5555, 0x6969, 0x9696}; + static unsigned int count = ARRAY_SIZE(patterns); + unsigned int i; + int rc = 0; + + for (i=0 ; i < count ; i++) { + wr_reg16(info, TIR, patterns[i]); + wr_reg16(info, BDR, patterns[(i+1)%count]); + if ((rd_reg16(info, TIR) != patterns[i]) || + (rd_reg16(info, BDR) != patterns[(i+1)%count])) { + rc = -ENODEV; + break; + } + } + info->gpio_present = (rd_reg32(info, JCR) & BIT5) ? 1 : 0; + info->init_error = rc ? 0 : DiagStatus_AddressFailure; + return rc; +} + +static int irq_test(struct slgt_info *info) +{ + unsigned long timeout; + unsigned long flags; + struct tty_struct *oldtty = info->port.tty; + u32 speed = info->params.data_rate; + + info->params.data_rate = 921600; + info->port.tty = NULL; + + spin_lock_irqsave(&info->lock, flags); + async_mode(info); + slgt_irq_on(info, IRQ_TXIDLE); + + /* enable transmitter */ + wr_reg16(info, TCR, + (unsigned short)(rd_reg16(info, TCR) | BIT1)); + + /* write one byte and wait for tx idle */ + wr_reg16(info, TDR, 0); + + /* assume failure */ + info->init_error = DiagStatus_IrqFailure; + info->irq_occurred = false; + + spin_unlock_irqrestore(&info->lock, flags); + + timeout=100; + while(timeout-- && !info->irq_occurred) + msleep_interruptible(10); + + spin_lock_irqsave(&info->lock,flags); + reset_port(info); + spin_unlock_irqrestore(&info->lock,flags); + + info->params.data_rate = speed; + info->port.tty = oldtty; + + info->init_error = info->irq_occurred ? 0 : DiagStatus_IrqFailure; + return info->irq_occurred ? 0 : -ENODEV; +} + +static int loopback_test_rx(struct slgt_info *info) +{ + unsigned char *src, *dest; + int count; + + if (desc_complete(info->rbufs[0])) { + count = desc_count(info->rbufs[0]); + src = info->rbufs[0].buf; + dest = info->tmp_rbuf; + + for( ; count ; count-=2, src+=2) { + /* src=data byte (src+1)=status byte */ + if (!(*(src+1) & (BIT9 + BIT8))) { + *dest = *src; + dest++; + info->tmp_rbuf_count++; + } + } + DBGDATA(info, info->tmp_rbuf, info->tmp_rbuf_count, "rx"); + return 1; + } + return 0; +} + +static int loopback_test(struct slgt_info *info) +{ +#define TESTFRAMESIZE 20 + + unsigned long timeout; + u16 count = TESTFRAMESIZE; + unsigned char buf[TESTFRAMESIZE]; + int rc = -ENODEV; + unsigned long flags; + + struct tty_struct *oldtty = info->port.tty; + MGSL_PARAMS params; + + memcpy(¶ms, &info->params, sizeof(params)); + + info->params.mode = MGSL_MODE_ASYNC; + info->params.data_rate = 921600; + info->params.loopback = 1; + info->port.tty = NULL; + + /* build and send transmit frame */ + for (count = 0; count < TESTFRAMESIZE; ++count) + buf[count] = (unsigned char)count; + + info->tmp_rbuf_count = 0; + memset(info->tmp_rbuf, 0, TESTFRAMESIZE); + + /* program hardware for HDLC and enabled receiver */ + spin_lock_irqsave(&info->lock,flags); + async_mode(info); + rx_start(info); + tx_load(info, buf, count); + spin_unlock_irqrestore(&info->lock, flags); + + /* wait for receive complete */ + for (timeout = 100; timeout; --timeout) { + msleep_interruptible(10); + if (loopback_test_rx(info)) { + rc = 0; + break; + } + } + + /* verify received frame length and contents */ + if (!rc && (info->tmp_rbuf_count != count || + memcmp(buf, info->tmp_rbuf, count))) { + rc = -ENODEV; + } + + spin_lock_irqsave(&info->lock,flags); + reset_adapter(info); + spin_unlock_irqrestore(&info->lock,flags); + + memcpy(&info->params, ¶ms, sizeof(info->params)); + info->port.tty = oldtty; + + info->init_error = rc ? DiagStatus_DmaFailure : 0; + return rc; +} + +static int adapter_test(struct slgt_info *info) +{ + DBGINFO(("testing %s\n", info->device_name)); + if (register_test(info) < 0) { + printk("register test failure %s addr=%08X\n", + info->device_name, info->phys_reg_addr); + } else if (irq_test(info) < 0) { + printk("IRQ test failure %s IRQ=%d\n", + info->device_name, info->irq_level); + } else if (loopback_test(info) < 0) { + printk("loopback test failure %s\n", info->device_name); + } + return info->init_error; +} + +/* + * transmit timeout handler + */ +static void tx_timeout(struct timer_list *t) +{ + struct slgt_info *info = from_timer(info, t, tx_timer); + unsigned long flags; + + DBGINFO(("%s tx_timeout\n", info->device_name)); + if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) { + info->icount.txtimeout++; + } + spin_lock_irqsave(&info->lock,flags); + tx_stop(info); + spin_unlock_irqrestore(&info->lock,flags); + +#if SYNCLINK_GENERIC_HDLC + if (info->netcount) + hdlcdev_tx_done(info); + else +#endif + bh_transmit(info); +} + +/* + * receive buffer polling timer + */ +static void rx_timeout(struct timer_list *t) +{ + struct slgt_info *info = from_timer(info, t, rx_timer); + unsigned long flags; + + DBGINFO(("%s rx_timeout\n", info->device_name)); + spin_lock_irqsave(&info->lock, flags); + info->pending_bh |= BH_RECEIVE; + spin_unlock_irqrestore(&info->lock, flags); + bh_handler(&info->task); +} + diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c new file mode 100644 index 000000000..ce08c5ec3 --- /dev/null +++ b/drivers/tty/synclinkmp.c @@ -0,0 +1,5579 @@ +// SPDX-License-Identifier: GPL-1.0+ +/* + * $Id: synclinkmp.c,v 4.38 2005/07/15 13:29:44 paulkf Exp $ + * + * Device driver for Microgate SyncLink Multiport + * high speed multiprotocol serial adapter. + * + * written by Paul Fulghum for Microgate Corporation + * paulkf@microgate.com + * + * Microgate and SyncLink are trademarks of Microgate Corporation + * + * Derived from serial.c written by Theodore Ts'o and Linus Torvalds + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq)) +#if defined(__i386__) +# define BREAKPOINT() asm(" int $3"); +#else +# define BREAKPOINT() { } +#endif + +#define MAX_DEVICES 12 + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINKMP_MODULE)) +#define SYNCLINK_GENERIC_HDLC 1 +#else +#define SYNCLINK_GENERIC_HDLC 0 +#endif + +#define GET_USER(error,value,addr) error = get_user(value,addr) +#define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0 +#define PUT_USER(error,value,addr) error = put_user(value,addr) +#define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0 + +#include + +static MGSL_PARAMS default_params = { + MGSL_MODE_HDLC, /* unsigned long mode */ + 0, /* unsigned char loopback; */ + HDLC_FLAG_UNDERRUN_ABORT15, /* unsigned short flags; */ + HDLC_ENCODING_NRZI_SPACE, /* unsigned char encoding; */ + 0, /* unsigned long clock_speed; */ + 0xff, /* unsigned char addr_filter; */ + HDLC_CRC_16_CCITT, /* unsigned short crc_type; */ + HDLC_PREAMBLE_LENGTH_8BITS, /* unsigned char preamble_length; */ + HDLC_PREAMBLE_PATTERN_NONE, /* unsigned char preamble; */ + 9600, /* unsigned long data_rate; */ + 8, /* unsigned char data_bits; */ + 1, /* unsigned char stop_bits; */ + ASYNC_PARITY_NONE /* unsigned char parity; */ +}; + +/* size in bytes of DMA data buffers */ +#define SCABUFSIZE 1024 +#define SCA_MEM_SIZE 0x40000 +#define SCA_BASE_SIZE 512 +#define SCA_REG_SIZE 16 +#define SCA_MAX_PORTS 4 +#define SCAMAXDESC 128 + +#define BUFFERLISTSIZE 4096 + +/* SCA-I style DMA buffer descriptor */ +typedef struct _SCADESC +{ + u16 next; /* lower l6 bits of next descriptor addr */ + u16 buf_ptr; /* lower 16 bits of buffer addr */ + u8 buf_base; /* upper 8 bits of buffer addr */ + u8 pad1; + u16 length; /* length of buffer */ + u8 status; /* status of buffer */ + u8 pad2; +} SCADESC, *PSCADESC; + +typedef struct _SCADESC_EX +{ + /* device driver bookkeeping section */ + char *virt_addr; /* virtual address of data buffer */ + u16 phys_entry; /* lower 16-bits of physical address of this descriptor */ +} SCADESC_EX, *PSCADESC_EX; + +/* The queue of BH actions to be performed */ + +#define BH_RECEIVE 1 +#define BH_TRANSMIT 2 +#define BH_STATUS 4 + +#define IO_PIN_SHUTDOWN_LIMIT 100 + +struct _input_signal_events { + int ri_up; + int ri_down; + int dsr_up; + int dsr_down; + int dcd_up; + int dcd_down; + int cts_up; + int cts_down; +}; + +/* + * Device instance data structure + */ +typedef struct _synclinkmp_info { + void *if_ptr; /* General purpose pointer (used by SPPP) */ + int magic; + struct tty_port port; + int line; + unsigned short close_delay; + unsigned short closing_wait; /* time to wait before closing */ + + struct mgsl_icount icount; + + int timeout; + int x_char; /* xon/xoff character */ + u16 read_status_mask1; /* break detection (SR1 indications) */ + u16 read_status_mask2; /* parity/framing/overun (SR2 indications) */ + unsigned char ignore_status_mask1; /* break detection (SR1 indications) */ + unsigned char ignore_status_mask2; /* parity/framing/overun (SR2 indications) */ + unsigned char *tx_buf; + int tx_put; + int tx_get; + int tx_count; + + wait_queue_head_t status_event_wait_q; + wait_queue_head_t event_wait_q; + struct timer_list tx_timer; /* HDLC transmit timeout timer */ + struct _synclinkmp_info *next_device; /* device list link */ + struct timer_list status_timer; /* input signal status check timer */ + + spinlock_t lock; /* spinlock for synchronizing with ISR */ + struct work_struct task; /* task structure for scheduling bh */ + + u32 max_frame_size; /* as set by device config */ + + u32 pending_bh; + + bool bh_running; /* Protection from multiple */ + int isr_overflow; + bool bh_requested; + + int dcd_chkcount; /* check counts to prevent */ + int cts_chkcount; /* too many IRQs if a signal */ + int dsr_chkcount; /* is floating */ + int ri_chkcount; + + char *buffer_list; /* virtual address of Rx & Tx buffer lists */ + unsigned long buffer_list_phys; + + unsigned int rx_buf_count; /* count of total allocated Rx buffers */ + SCADESC *rx_buf_list; /* list of receive buffer entries */ + SCADESC_EX rx_buf_list_ex[SCAMAXDESC]; /* list of receive buffer entries */ + unsigned int current_rx_buf; + + unsigned int tx_buf_count; /* count of total allocated Tx buffers */ + SCADESC *tx_buf_list; /* list of transmit buffer entries */ + SCADESC_EX tx_buf_list_ex[SCAMAXDESC]; /* list of transmit buffer entries */ + unsigned int last_tx_buf; + + unsigned char *tmp_rx_buf; + unsigned int tmp_rx_buf_count; + + bool rx_enabled; + bool rx_overflow; + + bool tx_enabled; + bool tx_active; + u32 idle_mode; + + unsigned char ie0_value; + unsigned char ie1_value; + unsigned char ie2_value; + unsigned char ctrlreg_value; + unsigned char old_signals; + + char device_name[25]; /* device instance name */ + + int port_count; + int adapter_num; + int port_num; + + struct _synclinkmp_info *port_array[SCA_MAX_PORTS]; + + unsigned int bus_type; /* expansion bus type (ISA,EISA,PCI) */ + + unsigned int irq_level; /* interrupt level */ + unsigned long irq_flags; + bool irq_requested; /* true if IRQ requested */ + + MGSL_PARAMS params; /* communications parameters */ + + unsigned char serial_signals; /* current serial signal states */ + + bool irq_occurred; /* for diagnostics use */ + unsigned int init_error; /* Initialization startup error */ + + u32 last_mem_alloc; + unsigned char* memory_base; /* shared memory address (PCI only) */ + u32 phys_memory_base; + int shared_mem_requested; + + unsigned char* sca_base; /* HD64570 SCA Memory address */ + u32 phys_sca_base; + u32 sca_offset; + bool sca_base_requested; + + unsigned char* lcr_base; /* local config registers (PCI only) */ + u32 phys_lcr_base; + u32 lcr_offset; + int lcr_mem_requested; + + unsigned char* statctrl_base; /* status/control register memory */ + u32 phys_statctrl_base; + u32 statctrl_offset; + bool sca_statctrl_requested; + + u32 misc_ctrl_value; + char *flag_buf; + bool drop_rts_on_tx_done; + + struct _input_signal_events input_signal_events; + + /* SPPP/Cisco HDLC device parts */ + int netcount; + spinlock_t netlock; + +#if SYNCLINK_GENERIC_HDLC + struct net_device *netdev; +#endif + +} SLMP_INFO; + +#define MGSL_MAGIC 0x5401 + +/* + * define serial signal status change macros + */ +#define MISCSTATUS_DCD_LATCHED (SerialSignal_DCD<<8) /* indicates change in DCD */ +#define MISCSTATUS_RI_LATCHED (SerialSignal_RI<<8) /* indicates change in RI */ +#define MISCSTATUS_CTS_LATCHED (SerialSignal_CTS<<8) /* indicates change in CTS */ +#define MISCSTATUS_DSR_LATCHED (SerialSignal_DSR<<8) /* change in DSR */ + +/* Common Register macros */ +#define LPR 0x00 +#define PABR0 0x02 +#define PABR1 0x03 +#define WCRL 0x04 +#define WCRM 0x05 +#define WCRH 0x06 +#define DPCR 0x08 +#define DMER 0x09 +#define ISR0 0x10 +#define ISR1 0x11 +#define ISR2 0x12 +#define IER0 0x14 +#define IER1 0x15 +#define IER2 0x16 +#define ITCR 0x18 +#define INTVR 0x1a +#define IMVR 0x1c + +/* MSCI Register macros */ +#define TRB 0x20 +#define TRBL 0x20 +#define TRBH 0x21 +#define SR0 0x22 +#define SR1 0x23 +#define SR2 0x24 +#define SR3 0x25 +#define FST 0x26 +#define IE0 0x28 +#define IE1 0x29 +#define IE2 0x2a +#define FIE 0x2b +#define CMD 0x2c +#define MD0 0x2e +#define MD1 0x2f +#define MD2 0x30 +#define CTL 0x31 +#define SA0 0x32 +#define SA1 0x33 +#define IDL 0x34 +#define TMC 0x35 +#define RXS 0x36 +#define TXS 0x37 +#define TRC0 0x38 +#define TRC1 0x39 +#define RRC 0x3a +#define CST0 0x3c +#define CST1 0x3d + +/* Timer Register Macros */ +#define TCNT 0x60 +#define TCNTL 0x60 +#define TCNTH 0x61 +#define TCONR 0x62 +#define TCONRL 0x62 +#define TCONRH 0x63 +#define TMCS 0x64 +#define TEPR 0x65 + +/* DMA Controller Register macros */ +#define DARL 0x80 +#define DARH 0x81 +#define DARB 0x82 +#define BAR 0x80 +#define BARL 0x80 +#define BARH 0x81 +#define BARB 0x82 +#define SAR 0x84 +#define SARL 0x84 +#define SARH 0x85 +#define SARB 0x86 +#define CPB 0x86 +#define CDA 0x88 +#define CDAL 0x88 +#define CDAH 0x89 +#define EDA 0x8a +#define EDAL 0x8a +#define EDAH 0x8b +#define BFL 0x8c +#define BFLL 0x8c +#define BFLH 0x8d +#define BCR 0x8e +#define BCRL 0x8e +#define BCRH 0x8f +#define DSR 0x90 +#define DMR 0x91 +#define FCT 0x93 +#define DIR 0x94 +#define DCMD 0x95 + +/* combine with timer or DMA register address */ +#define TIMER0 0x00 +#define TIMER1 0x08 +#define TIMER2 0x10 +#define TIMER3 0x18 +#define RXDMA 0x00 +#define TXDMA 0x20 + +/* SCA Command Codes */ +#define NOOP 0x00 +#define TXRESET 0x01 +#define TXENABLE 0x02 +#define TXDISABLE 0x03 +#define TXCRCINIT 0x04 +#define TXCRCEXCL 0x05 +#define TXEOM 0x06 +#define TXABORT 0x07 +#define MPON 0x08 +#define TXBUFCLR 0x09 +#define RXRESET 0x11 +#define RXENABLE 0x12 +#define RXDISABLE 0x13 +#define RXCRCINIT 0x14 +#define RXREJECT 0x15 +#define SEARCHMP 0x16 +#define RXCRCEXCL 0x17 +#define RXCRCCALC 0x18 +#define CHRESET 0x21 +#define HUNT 0x31 + +/* DMA command codes */ +#define SWABORT 0x01 +#define FEICLEAR 0x02 + +/* IE0 */ +#define TXINTE BIT7 +#define RXINTE BIT6 +#define TXRDYE BIT1 +#define RXRDYE BIT0 + +/* IE1 & SR1 */ +#define UDRN BIT7 +#define IDLE BIT6 +#define SYNCD BIT4 +#define FLGD BIT4 +#define CCTS BIT3 +#define CDCD BIT2 +#define BRKD BIT1 +#define ABTD BIT1 +#define GAPD BIT1 +#define BRKE BIT0 +#define IDLD BIT0 + +/* IE2 & SR2 */ +#define EOM BIT7 +#define PMP BIT6 +#define SHRT BIT6 +#define PE BIT5 +#define ABT BIT5 +#define FRME BIT4 +#define RBIT BIT4 +#define OVRN BIT3 +#define CRCE BIT2 + + +/* + * Global linked list of SyncLink devices + */ +static SLMP_INFO *synclinkmp_device_list = NULL; +static int synclinkmp_adapter_count = -1; +static int synclinkmp_device_count = 0; + +/* + * Set this param to non-zero to load eax with the + * .text section address and breakpoint on module load. + * This is useful for use with gdb and add-symbol-file command. + */ +static bool break_on_load = 0; + +/* + * Driver major number, defaults to zero to get auto + * assigned major number. May be forced as module parameter. + */ +static int ttymajor = 0; + +/* + * Array of user specified options for ISA adapters. + */ +static int debug_level = 0; +static int maxframe[MAX_DEVICES] = {0,}; + +module_param(break_on_load, bool, 0); +module_param(ttymajor, int, 0); +module_param(debug_level, int, 0); +module_param_array(maxframe, int, NULL, 0); + +static char *driver_name = "SyncLink MultiPort driver"; +static char *driver_version = "$Revision: 4.38 $"; + +static int synclinkmp_init_one(struct pci_dev *dev,const struct pci_device_id *ent); +static void synclinkmp_remove_one(struct pci_dev *dev); + +static const struct pci_device_id synclinkmp_pci_tbl[] = { + { PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_SCA, PCI_ANY_ID, PCI_ANY_ID, }, + { 0, }, /* terminate list */ +}; +MODULE_DEVICE_TABLE(pci, synclinkmp_pci_tbl); + +MODULE_LICENSE("GPL"); + +static struct pci_driver synclinkmp_pci_driver = { + .name = "synclinkmp", + .id_table = synclinkmp_pci_tbl, + .probe = synclinkmp_init_one, + .remove = synclinkmp_remove_one, +}; + + +static struct tty_driver *serial_driver; + +/* number of characters left in xmit buffer before we ask for more */ +#define WAKEUP_CHARS 256 + + +/* tty callbacks */ + +static int open(struct tty_struct *tty, struct file * filp); +static void close(struct tty_struct *tty, struct file * filp); +static void hangup(struct tty_struct *tty); +static void set_termios(struct tty_struct *tty, struct ktermios *old_termios); + +static int write(struct tty_struct *tty, const unsigned char *buf, int count); +static int put_char(struct tty_struct *tty, unsigned char ch); +static void send_xchar(struct tty_struct *tty, char ch); +static void wait_until_sent(struct tty_struct *tty, int timeout); +static int write_room(struct tty_struct *tty); +static void flush_chars(struct tty_struct *tty); +static void flush_buffer(struct tty_struct *tty); +static void tx_hold(struct tty_struct *tty); +static void tx_release(struct tty_struct *tty); + +static int ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); +static int chars_in_buffer(struct tty_struct *tty); +static void throttle(struct tty_struct * tty); +static void unthrottle(struct tty_struct * tty); +static int set_break(struct tty_struct *tty, int break_state); + +#if SYNCLINK_GENERIC_HDLC +#define dev_to_port(D) (dev_to_hdlc(D)->priv) +static void hdlcdev_tx_done(SLMP_INFO *info); +static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size); +static int hdlcdev_init(SLMP_INFO *info); +static void hdlcdev_exit(SLMP_INFO *info); +#endif + +/* ioctl handlers */ + +static int get_stats(SLMP_INFO *info, struct mgsl_icount __user *user_icount); +static int get_params(SLMP_INFO *info, MGSL_PARAMS __user *params); +static int set_params(SLMP_INFO *info, MGSL_PARAMS __user *params); +static int get_txidle(SLMP_INFO *info, int __user *idle_mode); +static int set_txidle(SLMP_INFO *info, int idle_mode); +static int tx_enable(SLMP_INFO *info, int enable); +static int tx_abort(SLMP_INFO *info); +static int rx_enable(SLMP_INFO *info, int enable); +static int modem_input_wait(SLMP_INFO *info,int arg); +static int wait_mgsl_event(SLMP_INFO *info, int __user *mask_ptr); +static int tiocmget(struct tty_struct *tty); +static int tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear); +static int set_break(struct tty_struct *tty, int break_state); + +static int add_device(SLMP_INFO *info); +static int device_init(int adapter_num, struct pci_dev *pdev); +static int claim_resources(SLMP_INFO *info); +static void release_resources(SLMP_INFO *info); + +static int startup(SLMP_INFO *info); +static int block_til_ready(struct tty_struct *tty, struct file * filp,SLMP_INFO *info); +static int carrier_raised(struct tty_port *port); +static void shutdown(SLMP_INFO *info); +static void program_hw(SLMP_INFO *info); +static void change_params(SLMP_INFO *info); + +static bool init_adapter(SLMP_INFO *info); +static bool register_test(SLMP_INFO *info); +static bool irq_test(SLMP_INFO *info); +static bool loopback_test(SLMP_INFO *info); +static int adapter_test(SLMP_INFO *info); +static bool memory_test(SLMP_INFO *info); + +static void reset_adapter(SLMP_INFO *info); +static void reset_port(SLMP_INFO *info); +static void async_mode(SLMP_INFO *info); +static void hdlc_mode(SLMP_INFO *info); + +static void rx_stop(SLMP_INFO *info); +static void rx_start(SLMP_INFO *info); +static void rx_reset_buffers(SLMP_INFO *info); +static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last); +static bool rx_get_frame(SLMP_INFO *info); + +static void tx_start(SLMP_INFO *info); +static void tx_stop(SLMP_INFO *info); +static void tx_load_fifo(SLMP_INFO *info); +static void tx_set_idle(SLMP_INFO *info); +static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count); + +static void get_signals(SLMP_INFO *info); +static void set_signals(SLMP_INFO *info); +static void enable_loopback(SLMP_INFO *info, int enable); +static void set_rate(SLMP_INFO *info, u32 data_rate); + +static int bh_action(SLMP_INFO *info); +static void bh_handler(struct work_struct *work); +static void bh_receive(SLMP_INFO *info); +static void bh_transmit(SLMP_INFO *info); +static void bh_status(SLMP_INFO *info); +static void isr_timer(SLMP_INFO *info); +static void isr_rxint(SLMP_INFO *info); +static void isr_rxrdy(SLMP_INFO *info); +static void isr_txint(SLMP_INFO *info); +static void isr_txrdy(SLMP_INFO *info); +static void isr_rxdmaok(SLMP_INFO *info); +static void isr_rxdmaerror(SLMP_INFO *info); +static void isr_txdmaok(SLMP_INFO *info); +static void isr_txdmaerror(SLMP_INFO *info); +static void isr_io_pin(SLMP_INFO *info, u16 status); + +static int alloc_dma_bufs(SLMP_INFO *info); +static void free_dma_bufs(SLMP_INFO *info); +static int alloc_buf_list(SLMP_INFO *info); +static int alloc_frame_bufs(SLMP_INFO *info, SCADESC *list, SCADESC_EX *list_ex,int count); +static int alloc_tmp_rx_buf(SLMP_INFO *info); +static void free_tmp_rx_buf(SLMP_INFO *info); + +static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count); +static void trace_block(SLMP_INFO *info, const char* data, int count, int xmit); +static void tx_timeout(struct timer_list *t); +static void status_timeout(struct timer_list *t); + +static unsigned char read_reg(SLMP_INFO *info, unsigned char addr); +static void write_reg(SLMP_INFO *info, unsigned char addr, unsigned char val); +static u16 read_reg16(SLMP_INFO *info, unsigned char addr); +static void write_reg16(SLMP_INFO *info, unsigned char addr, u16 val); +static unsigned char read_status_reg(SLMP_INFO * info); +static void write_control_reg(SLMP_INFO * info); + + +static unsigned char rx_active_fifo_level = 16; // rx request FIFO activation level in bytes +static unsigned char tx_active_fifo_level = 16; // tx request FIFO activation level in bytes +static unsigned char tx_negate_fifo_level = 32; // tx request FIFO negation level in bytes + +static u32 misc_ctrl_value = 0x007e4040; +static u32 lcr1_brdr_value = 0x00800028; + +static u32 read_ahead_count = 8; + +/* DPCR, DMA Priority Control + * + * 07..05 Not used, must be 0 + * 04 BRC, bus release condition: 0=all transfers complete + * 1=release after 1 xfer on all channels + * 03 CCC, channel change condition: 0=every cycle + * 1=after each channel completes all xfers + * 02..00 PR<2..0>, priority 100=round robin + * + * 00000100 = 0x00 + */ +static unsigned char dma_priority = 0x04; + +// Number of bytes that can be written to shared RAM +// in a single write operation +static u32 sca_pci_load_interval = 64; + +/* + * 1st function defined in .text section. Calling this function in + * init_module() followed by a breakpoint allows a remote debugger + * (gdb) to get the .text address for the add-symbol-file command. + * This allows remote debugging of dynamically loadable modules. + */ +static void* synclinkmp_get_text_ptr(void); +static void* synclinkmp_get_text_ptr(void) {return synclinkmp_get_text_ptr;} + +static inline int sanity_check(SLMP_INFO *info, + char *name, const char *routine) +{ +#ifdef SANITY_CHECK + static const char *badmagic = + "Warning: bad magic number for synclinkmp_struct (%s) in %s\n"; + static const char *badinfo = + "Warning: null synclinkmp_struct for (%s) in %s\n"; + + if (!info) { + printk(badinfo, name, routine); + return 1; + } + if (info->magic != MGSL_MAGIC) { + printk(badmagic, name, routine); + return 1; + } +#else + if (!info) + return 1; +#endif + return 0; +} + +/* + * line discipline callback wrappers + * + * The wrappers maintain line discipline references + * while calling into the line discipline. + * + * ldisc_receive_buf - pass receive data to line discipline + */ + +static void ldisc_receive_buf(struct tty_struct *tty, + const __u8 *data, char *flags, int count) +{ + struct tty_ldisc *ld; + if (!tty) + return; + ld = tty_ldisc_ref(tty); + if (ld) { + if (ld->ops->receive_buf) + ld->ops->receive_buf(tty, data, flags, count); + tty_ldisc_deref(ld); + } +} + +/* tty callbacks */ + +static int install(struct tty_driver *driver, struct tty_struct *tty) +{ + SLMP_INFO *info; + int line = tty->index; + + if (line >= synclinkmp_device_count) { + printk("%s(%d): open with invalid line #%d.\n", + __FILE__,__LINE__,line); + return -ENODEV; + } + + info = synclinkmp_device_list; + while (info && info->line != line) + info = info->next_device; + if (sanity_check(info, tty->name, "open")) + return -ENODEV; + if (info->init_error) { + printk("%s(%d):%s device is not allocated, init error=%d\n", + __FILE__, __LINE__, info->device_name, + info->init_error); + return -ENODEV; + } + + tty->driver_data = info; + + return tty_port_install(&info->port, driver, tty); +} + +/* Called when a port is opened. Init and enable port. + */ +static int open(struct tty_struct *tty, struct file *filp) +{ + SLMP_INFO *info = tty->driver_data; + unsigned long flags; + int retval; + + info->port.tty = tty; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s open(), old ref count = %d\n", + __FILE__,__LINE__,tty->driver->name, info->port.count); + + info->port.low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0; + + spin_lock_irqsave(&info->netlock, flags); + if (info->netcount) { + retval = -EBUSY; + spin_unlock_irqrestore(&info->netlock, flags); + goto cleanup; + } + info->port.count++; + spin_unlock_irqrestore(&info->netlock, flags); + + if (info->port.count == 1) { + /* 1st open on this device, init hardware */ + retval = startup(info); + if (retval < 0) + goto cleanup; + } + + retval = block_til_ready(tty, filp, info); + if (retval) { + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s block_til_ready() returned %d\n", + __FILE__,__LINE__, info->device_name, retval); + goto cleanup; + } + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s open() success\n", + __FILE__,__LINE__, info->device_name); + retval = 0; + +cleanup: + if (retval) { + if (tty->count == 1) + info->port.tty = NULL; /* tty layer will release tty struct */ + if(info->port.count) + info->port.count--; + } + + return retval; +} + +/* Called when port is closed. Wait for remaining data to be + * sent. Disable port and free resources. + */ +static void close(struct tty_struct *tty, struct file *filp) +{ + SLMP_INFO * info = tty->driver_data; + + if (sanity_check(info, tty->name, "close")) + return; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s close() entry, count=%d\n", + __FILE__,__LINE__, info->device_name, info->port.count); + + if (tty_port_close_start(&info->port, tty, filp) == 0) + goto cleanup; + + mutex_lock(&info->port.mutex); + if (tty_port_initialized(&info->port)) + wait_until_sent(tty, info->timeout); + + flush_buffer(tty); + tty_ldisc_flush(tty); + shutdown(info); + mutex_unlock(&info->port.mutex); + + tty_port_close_end(&info->port, tty); + info->port.tty = NULL; +cleanup: + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s close() exit, count=%d\n", __FILE__,__LINE__, + tty->driver->name, info->port.count); +} + +/* Called by tty_hangup() when a hangup is signaled. + * This is the same as closing all open descriptors for the port. + */ +static void hangup(struct tty_struct *tty) +{ + SLMP_INFO *info = tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s hangup()\n", + __FILE__,__LINE__, info->device_name ); + + if (sanity_check(info, tty->name, "hangup")) + return; + + mutex_lock(&info->port.mutex); + flush_buffer(tty); + shutdown(info); + + spin_lock_irqsave(&info->port.lock, flags); + info->port.count = 0; + info->port.tty = NULL; + spin_unlock_irqrestore(&info->port.lock, flags); + tty_port_set_active(&info->port, 1); + mutex_unlock(&info->port.mutex); + + wake_up_interruptible(&info->port.open_wait); +} + +/* Set new termios settings + */ +static void set_termios(struct tty_struct *tty, struct ktermios *old_termios) +{ + SLMP_INFO *info = tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s set_termios()\n", __FILE__,__LINE__, + tty->driver->name ); + + change_params(info); + + /* Handle transition to B0 status */ + if ((old_termios->c_cflag & CBAUD) && !C_BAUD(tty)) { + info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR); + spin_lock_irqsave(&info->lock,flags); + set_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + } + + /* Handle transition away from B0 status */ + if (!(old_termios->c_cflag & CBAUD) && C_BAUD(tty)) { + info->serial_signals |= SerialSignal_DTR; + if (!C_CRTSCTS(tty) || !tty_throttled(tty)) + info->serial_signals |= SerialSignal_RTS; + spin_lock_irqsave(&info->lock,flags); + set_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + } + + /* Handle turning off CRTSCTS */ + if (old_termios->c_cflag & CRTSCTS && !C_CRTSCTS(tty)) { + tty->hw_stopped = 0; + tx_release(tty); + } +} + +/* Send a block of data + * + * Arguments: + * + * tty pointer to tty information structure + * buf pointer to buffer containing send data + * count size of send data in bytes + * + * Return Value: number of characters written + */ +static int write(struct tty_struct *tty, + const unsigned char *buf, int count) +{ + int c, ret = 0; + SLMP_INFO *info = tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s write() count=%d\n", + __FILE__,__LINE__,info->device_name,count); + + if (sanity_check(info, tty->name, "write")) + goto cleanup; + + if (!info->tx_buf) + goto cleanup; + + if (info->params.mode == MGSL_MODE_HDLC) { + if (count > info->max_frame_size) { + ret = -EIO; + goto cleanup; + } + if (info->tx_active) + goto cleanup; + if (info->tx_count) { + /* send accumulated data from send_char() calls */ + /* as frame and wait before accepting more data. */ + tx_load_dma_buffer(info, info->tx_buf, info->tx_count); + goto start; + } + ret = info->tx_count = count; + tx_load_dma_buffer(info, buf, count); + goto start; + } + + for (;;) { + c = min_t(int, count, + min(info->max_frame_size - info->tx_count - 1, + info->max_frame_size - info->tx_put)); + if (c <= 0) + break; + + memcpy(info->tx_buf + info->tx_put, buf, c); + + spin_lock_irqsave(&info->lock,flags); + info->tx_put += c; + if (info->tx_put >= info->max_frame_size) + info->tx_put -= info->max_frame_size; + info->tx_count += c; + spin_unlock_irqrestore(&info->lock,flags); + + buf += c; + count -= c; + ret += c; + } + + if (info->params.mode == MGSL_MODE_HDLC) { + if (count) { + ret = info->tx_count = 0; + goto cleanup; + } + tx_load_dma_buffer(info, info->tx_buf, info->tx_count); + } +start: + if (info->tx_count && !tty->stopped && !tty->hw_stopped) { + spin_lock_irqsave(&info->lock,flags); + if (!info->tx_active) + tx_start(info); + spin_unlock_irqrestore(&info->lock,flags); + } + +cleanup: + if (debug_level >= DEBUG_LEVEL_INFO) + printk( "%s(%d):%s write() returning=%d\n", + __FILE__,__LINE__,info->device_name,ret); + return ret; +} + +/* Add a character to the transmit buffer. + */ +static int put_char(struct tty_struct *tty, unsigned char ch) +{ + SLMP_INFO *info = tty->driver_data; + unsigned long flags; + int ret = 0; + + if ( debug_level >= DEBUG_LEVEL_INFO ) { + printk( "%s(%d):%s put_char(%d)\n", + __FILE__,__LINE__,info->device_name,ch); + } + + if (sanity_check(info, tty->name, "put_char")) + return 0; + + if (!info->tx_buf) + return 0; + + spin_lock_irqsave(&info->lock,flags); + + if ( (info->params.mode != MGSL_MODE_HDLC) || + !info->tx_active ) { + + if (info->tx_count < info->max_frame_size - 1) { + info->tx_buf[info->tx_put++] = ch; + if (info->tx_put >= info->max_frame_size) + info->tx_put -= info->max_frame_size; + info->tx_count++; + ret = 1; + } + } + + spin_unlock_irqrestore(&info->lock,flags); + return ret; +} + +/* Send a high-priority XON/XOFF character + */ +static void send_xchar(struct tty_struct *tty, char ch) +{ + SLMP_INFO *info = tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s send_xchar(%d)\n", + __FILE__,__LINE__, info->device_name, ch ); + + if (sanity_check(info, tty->name, "send_xchar")) + return; + + info->x_char = ch; + if (ch) { + /* Make sure transmit interrupts are on */ + spin_lock_irqsave(&info->lock,flags); + if (!info->tx_enabled) + tx_start(info); + spin_unlock_irqrestore(&info->lock,flags); + } +} + +/* Wait until the transmitter is empty. + */ +static void wait_until_sent(struct tty_struct *tty, int timeout) +{ + SLMP_INFO * info = tty->driver_data; + unsigned long orig_jiffies, char_time; + + if (!info ) + return; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s wait_until_sent() entry\n", + __FILE__,__LINE__, info->device_name ); + + if (sanity_check(info, tty->name, "wait_until_sent")) + return; + + if (!tty_port_initialized(&info->port)) + goto exit; + + orig_jiffies = jiffies; + + /* Set check interval to 1/5 of estimated time to + * send a character, and make it at least 1. The check + * interval should also be less than the timeout. + * Note: use tight timings here to satisfy the NIST-PCTS. + */ + + if ( info->params.data_rate ) { + char_time = info->timeout/(32 * 5); + if (!char_time) + char_time++; + } else + char_time = 1; + + if (timeout) + char_time = min_t(unsigned long, char_time, timeout); + + if ( info->params.mode == MGSL_MODE_HDLC ) { + while (info->tx_active) { + msleep_interruptible(jiffies_to_msecs(char_time)); + if (signal_pending(current)) + break; + if (timeout && time_after(jiffies, orig_jiffies + timeout)) + break; + } + } else { + /* + * TODO: determine if there is something similar to USC16C32 + * TXSTATUS_ALL_SENT status + */ + while ( info->tx_active && info->tx_enabled) { + msleep_interruptible(jiffies_to_msecs(char_time)); + if (signal_pending(current)) + break; + if (timeout && time_after(jiffies, orig_jiffies + timeout)) + break; + } + } + +exit: + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s wait_until_sent() exit\n", + __FILE__,__LINE__, info->device_name ); +} + +/* Return the count of free bytes in transmit buffer + */ +static int write_room(struct tty_struct *tty) +{ + SLMP_INFO *info = tty->driver_data; + int ret; + + if (sanity_check(info, tty->name, "write_room")) + return 0; + + if (info->params.mode == MGSL_MODE_HDLC) { + ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE; + } else { + ret = info->max_frame_size - info->tx_count - 1; + if (ret < 0) + ret = 0; + } + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s write_room()=%d\n", + __FILE__, __LINE__, info->device_name, ret); + + return ret; +} + +/* enable transmitter and send remaining buffered characters + */ +static void flush_chars(struct tty_struct *tty) +{ + SLMP_INFO *info = tty->driver_data; + unsigned long flags; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):%s flush_chars() entry tx_count=%d\n", + __FILE__,__LINE__,info->device_name,info->tx_count); + + if (sanity_check(info, tty->name, "flush_chars")) + return; + + if (info->tx_count <= 0 || tty->stopped || tty->hw_stopped || + !info->tx_buf) + return; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):%s flush_chars() entry, starting transmitter\n", + __FILE__,__LINE__,info->device_name ); + + spin_lock_irqsave(&info->lock,flags); + + if (!info->tx_active) { + if ( (info->params.mode == MGSL_MODE_HDLC) && + info->tx_count ) { + /* operating in synchronous (frame oriented) mode */ + /* copy data from circular tx_buf to */ + /* transmit DMA buffer. */ + tx_load_dma_buffer(info, + info->tx_buf,info->tx_count); + } + tx_start(info); + } + + spin_unlock_irqrestore(&info->lock,flags); +} + +/* Discard all data in the send buffer + */ +static void flush_buffer(struct tty_struct *tty) +{ + SLMP_INFO *info = tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s flush_buffer() entry\n", + __FILE__,__LINE__, info->device_name ); + + if (sanity_check(info, tty->name, "flush_buffer")) + return; + + spin_lock_irqsave(&info->lock,flags); + info->tx_count = info->tx_put = info->tx_get = 0; + del_timer(&info->tx_timer); + spin_unlock_irqrestore(&info->lock,flags); + + tty_wakeup(tty); +} + +/* throttle (stop) transmitter + */ +static void tx_hold(struct tty_struct *tty) +{ + SLMP_INFO *info = tty->driver_data; + unsigned long flags; + + if (sanity_check(info, tty->name, "tx_hold")) + return; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk("%s(%d):%s tx_hold()\n", + __FILE__,__LINE__,info->device_name); + + spin_lock_irqsave(&info->lock,flags); + if (info->tx_enabled) + tx_stop(info); + spin_unlock_irqrestore(&info->lock,flags); +} + +/* release (start) transmitter + */ +static void tx_release(struct tty_struct *tty) +{ + SLMP_INFO *info = tty->driver_data; + unsigned long flags; + + if (sanity_check(info, tty->name, "tx_release")) + return; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk("%s(%d):%s tx_release()\n", + __FILE__,__LINE__,info->device_name); + + spin_lock_irqsave(&info->lock,flags); + if (!info->tx_enabled) + tx_start(info); + spin_unlock_irqrestore(&info->lock,flags); +} + +/* Service an IOCTL request + * + * Arguments: + * + * tty pointer to tty instance data + * cmd IOCTL command code + * arg command argument/context + * + * Return Value: 0 if success, otherwise error code + */ +static int ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + SLMP_INFO *info = tty->driver_data; + void __user *argp = (void __user *)arg; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s ioctl() cmd=%08X\n", __FILE__,__LINE__, + info->device_name, cmd ); + + if (sanity_check(info, tty->name, "ioctl")) + return -ENODEV; + + if (cmd != TIOCMIWAIT) { + if (tty_io_error(tty)) + return -EIO; + } + + switch (cmd) { + case MGSL_IOCGPARAMS: + return get_params(info, argp); + case MGSL_IOCSPARAMS: + return set_params(info, argp); + case MGSL_IOCGTXIDLE: + return get_txidle(info, argp); + case MGSL_IOCSTXIDLE: + return set_txidle(info, (int)arg); + case MGSL_IOCTXENABLE: + return tx_enable(info, (int)arg); + case MGSL_IOCRXENABLE: + return rx_enable(info, (int)arg); + case MGSL_IOCTXABORT: + return tx_abort(info); + case MGSL_IOCGSTATS: + return get_stats(info, argp); + case MGSL_IOCWAITEVENT: + return wait_mgsl_event(info, argp); + case MGSL_IOCLOOPTXDONE: + return 0; // TODO: Not supported, need to document + /* Wait for modem input (DCD,RI,DSR,CTS) change + * as specified by mask in arg (TIOCM_RNG/DSR/CD/CTS) + */ + case TIOCMIWAIT: + return modem_input_wait(info,(int)arg); + + /* + * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) + * Return: write counters to the user passed counter struct + * NB: both 1->0 and 0->1 transitions are counted except for + * RI where only 0->1 is counted. + */ + default: + return -ENOIOCTLCMD; + } + return 0; +} + +static int get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount) +{ + SLMP_INFO *info = tty->driver_data; + struct mgsl_icount cnow; /* kernel counter temps */ + unsigned long flags; + + spin_lock_irqsave(&info->lock,flags); + cnow = info->icount; + spin_unlock_irqrestore(&info->lock,flags); + + icount->cts = cnow.cts; + icount->dsr = cnow.dsr; + icount->rng = cnow.rng; + icount->dcd = cnow.dcd; + icount->rx = cnow.rx; + icount->tx = cnow.tx; + icount->frame = cnow.frame; + icount->overrun = cnow.overrun; + icount->parity = cnow.parity; + icount->brk = cnow.brk; + icount->buf_overrun = cnow.buf_overrun; + + return 0; +} + +/* + * /proc fs routines.... + */ + +static inline void line_info(struct seq_file *m, SLMP_INFO *info) +{ + char stat_buf[30]; + unsigned long flags; + + seq_printf(m, "%s: SCABase=%08x Mem=%08X StatusControl=%08x LCR=%08X\n" + "\tIRQ=%d MaxFrameSize=%u\n", + info->device_name, + info->phys_sca_base, + info->phys_memory_base, + info->phys_statctrl_base, + info->phys_lcr_base, + info->irq_level, + info->max_frame_size ); + + /* output current serial signal states */ + spin_lock_irqsave(&info->lock,flags); + get_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + + stat_buf[0] = 0; + stat_buf[1] = 0; + if (info->serial_signals & SerialSignal_RTS) + strcat(stat_buf, "|RTS"); + if (info->serial_signals & SerialSignal_CTS) + strcat(stat_buf, "|CTS"); + if (info->serial_signals & SerialSignal_DTR) + strcat(stat_buf, "|DTR"); + if (info->serial_signals & SerialSignal_DSR) + strcat(stat_buf, "|DSR"); + if (info->serial_signals & SerialSignal_DCD) + strcat(stat_buf, "|CD"); + if (info->serial_signals & SerialSignal_RI) + strcat(stat_buf, "|RI"); + + if (info->params.mode == MGSL_MODE_HDLC) { + seq_printf(m, "\tHDLC txok:%d rxok:%d", + info->icount.txok, info->icount.rxok); + if (info->icount.txunder) + seq_printf(m, " txunder:%d", info->icount.txunder); + if (info->icount.txabort) + seq_printf(m, " txabort:%d", info->icount.txabort); + if (info->icount.rxshort) + seq_printf(m, " rxshort:%d", info->icount.rxshort); + if (info->icount.rxlong) + seq_printf(m, " rxlong:%d", info->icount.rxlong); + if (info->icount.rxover) + seq_printf(m, " rxover:%d", info->icount.rxover); + if (info->icount.rxcrc) + seq_printf(m, " rxlong:%d", info->icount.rxcrc); + } else { + seq_printf(m, "\tASYNC tx:%d rx:%d", + info->icount.tx, info->icount.rx); + if (info->icount.frame) + seq_printf(m, " fe:%d", info->icount.frame); + if (info->icount.parity) + seq_printf(m, " pe:%d", info->icount.parity); + if (info->icount.brk) + seq_printf(m, " brk:%d", info->icount.brk); + if (info->icount.overrun) + seq_printf(m, " oe:%d", info->icount.overrun); + } + + /* Append serial signal status to end */ + seq_printf(m, " %s\n", stat_buf+1); + + seq_printf(m, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n", + info->tx_active,info->bh_requested,info->bh_running, + info->pending_bh); +} + +/* Called to print information about devices + */ +static int synclinkmp_proc_show(struct seq_file *m, void *v) +{ + SLMP_INFO *info; + + seq_printf(m, "synclinkmp driver:%s\n", driver_version); + + info = synclinkmp_device_list; + while( info ) { + line_info(m, info); + info = info->next_device; + } + return 0; +} + +/* Return the count of bytes in transmit buffer + */ +static int chars_in_buffer(struct tty_struct *tty) +{ + SLMP_INFO *info = tty->driver_data; + + if (sanity_check(info, tty->name, "chars_in_buffer")) + return 0; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s chars_in_buffer()=%d\n", + __FILE__, __LINE__, info->device_name, info->tx_count); + + return info->tx_count; +} + +/* Signal remote device to throttle send data (our receive data) + */ +static void throttle(struct tty_struct * tty) +{ + SLMP_INFO *info = tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s throttle() entry\n", + __FILE__,__LINE__, info->device_name ); + + if (sanity_check(info, tty->name, "throttle")) + return; + + if (I_IXOFF(tty)) + send_xchar(tty, STOP_CHAR(tty)); + + if (C_CRTSCTS(tty)) { + spin_lock_irqsave(&info->lock,flags); + info->serial_signals &= ~SerialSignal_RTS; + set_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + } +} + +/* Signal remote device to stop throttling send data (our receive data) + */ +static void unthrottle(struct tty_struct * tty) +{ + SLMP_INFO *info = tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s unthrottle() entry\n", + __FILE__,__LINE__, info->device_name ); + + if (sanity_check(info, tty->name, "unthrottle")) + return; + + if (I_IXOFF(tty)) { + if (info->x_char) + info->x_char = 0; + else + send_xchar(tty, START_CHAR(tty)); + } + + if (C_CRTSCTS(tty)) { + spin_lock_irqsave(&info->lock,flags); + info->serial_signals |= SerialSignal_RTS; + set_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + } +} + +/* set or clear transmit break condition + * break_state -1=set break condition, 0=clear + */ +static int set_break(struct tty_struct *tty, int break_state) +{ + unsigned char RegValue; + SLMP_INFO * info = tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s set_break(%d)\n", + __FILE__,__LINE__, info->device_name, break_state); + + if (sanity_check(info, tty->name, "set_break")) + return -EINVAL; + + spin_lock_irqsave(&info->lock,flags); + RegValue = read_reg(info, CTL); + if (break_state == -1) + RegValue |= BIT3; + else + RegValue &= ~BIT3; + write_reg(info, CTL, RegValue); + spin_unlock_irqrestore(&info->lock,flags); + return 0; +} + +#if SYNCLINK_GENERIC_HDLC + +/** + * hdlcdev_attach - called by generic HDLC layer when protocol selected (PPP, frame relay, etc.) + * @dev: pointer to network device structure + * @encoding: serial encoding setting + * @parity: FCS setting + * + * Set encoding and frame check sequence (FCS) options. + * + * Return: 0 if success, otherwise error code + */ +static int hdlcdev_attach(struct net_device *dev, unsigned short encoding, + unsigned short parity) +{ + SLMP_INFO *info = dev_to_port(dev); + unsigned char new_encoding; + unsigned short new_crctype; + + /* return error if TTY interface open */ + if (info->port.count) + return -EBUSY; + + switch (encoding) + { + case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break; + case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break; + case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break; + case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break; + case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break; + default: return -EINVAL; + } + + switch (parity) + { + case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break; + case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break; + case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break; + default: return -EINVAL; + } + + info->params.encoding = new_encoding; + info->params.crc_type = new_crctype; + + /* if network interface up, reprogram hardware */ + if (info->netcount) + program_hw(info); + + return 0; +} + +/** + * hdlcdev_xmit - called by generic HDLC layer to send frame + * @skb: socket buffer containing HDLC frame + * @dev: pointer to network device structure + */ +static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb, + struct net_device *dev) +{ + SLMP_INFO *info = dev_to_port(dev); + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name); + + /* stop sending until this frame completes */ + netif_stop_queue(dev); + + /* copy data to device buffers */ + info->tx_count = skb->len; + tx_load_dma_buffer(info, skb->data, skb->len); + + /* update network statistics */ + dev->stats.tx_packets++; + dev->stats.tx_bytes += skb->len; + + /* done with socket buffer, so free it */ + dev_kfree_skb(skb); + + /* save start time for transmit timeout detection */ + netif_trans_update(dev); + + /* start hardware transmitter if necessary */ + spin_lock_irqsave(&info->lock,flags); + if (!info->tx_active) + tx_start(info); + spin_unlock_irqrestore(&info->lock,flags); + + return NETDEV_TX_OK; +} + +/** + * hdlcdev_open - called by network layer when interface enabled + * @dev: pointer to network device structure + * + * Claim resources and initialize hardware. + * + * Return: 0 if success, otherwise error code + */ +static int hdlcdev_open(struct net_device *dev) +{ + SLMP_INFO *info = dev_to_port(dev); + int rc; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name); + + /* generic HDLC layer open processing */ + rc = hdlc_open(dev); + if (rc) + return rc; + + /* arbitrate between network and tty opens */ + spin_lock_irqsave(&info->netlock, flags); + if (info->port.count != 0 || info->netcount != 0) { + printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name); + spin_unlock_irqrestore(&info->netlock, flags); + return -EBUSY; + } + info->netcount=1; + spin_unlock_irqrestore(&info->netlock, flags); + + /* claim resources and init adapter */ + if ((rc = startup(info)) != 0) { + spin_lock_irqsave(&info->netlock, flags); + info->netcount=0; + spin_unlock_irqrestore(&info->netlock, flags); + return rc; + } + + /* assert RTS and DTR, apply hardware settings */ + info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR; + program_hw(info); + + /* enable network layer transmit */ + netif_trans_update(dev); + netif_start_queue(dev); + + /* inform generic HDLC layer of current DCD status */ + spin_lock_irqsave(&info->lock, flags); + get_signals(info); + spin_unlock_irqrestore(&info->lock, flags); + if (info->serial_signals & SerialSignal_DCD) + netif_carrier_on(dev); + else + netif_carrier_off(dev); + return 0; +} + +/** + * hdlcdev_close - called by network layer when interface is disabled + * @dev: pointer to network device structure + * + * Shutdown hardware and release resources. + * + * Return: 0 if success, otherwise error code + */ +static int hdlcdev_close(struct net_device *dev) +{ + SLMP_INFO *info = dev_to_port(dev); + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name); + + netif_stop_queue(dev); + + /* shutdown adapter and release resources */ + shutdown(info); + + hdlc_close(dev); + + spin_lock_irqsave(&info->netlock, flags); + info->netcount=0; + spin_unlock_irqrestore(&info->netlock, flags); + + return 0; +} + +/** + * hdlcdev_ioctl - called by network layer to process IOCTL call to network device + * @dev: pointer to network device structure + * @ifr: pointer to network interface request structure + * @cmd: IOCTL command code + * + * Return: 0 if success, otherwise error code + */ +static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + const size_t size = sizeof(sync_serial_settings); + sync_serial_settings new_line; + sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync; + SLMP_INFO *info = dev_to_port(dev); + unsigned int flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name); + + /* return error if TTY interface open */ + if (info->port.count) + return -EBUSY; + + if (cmd != SIOCWANDEV) + return hdlc_ioctl(dev, ifr, cmd); + + switch(ifr->ifr_settings.type) { + case IF_GET_IFACE: /* return current sync_serial_settings */ + + ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL; + if (ifr->ifr_settings.size < size) { + ifr->ifr_settings.size = size; /* data size wanted */ + return -ENOBUFS; + } + + flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | + HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | + HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | + HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); + + memset(&new_line, 0, sizeof(new_line)); + switch (flags){ + case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break; + case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break; + case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break; + case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break; + default: new_line.clock_type = CLOCK_DEFAULT; + } + + new_line.clock_rate = info->params.clock_speed; + new_line.loopback = info->params.loopback ? 1:0; + + if (copy_to_user(line, &new_line, size)) + return -EFAULT; + return 0; + + case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */ + + if(!capable(CAP_NET_ADMIN)) + return -EPERM; + if (copy_from_user(&new_line, line, size)) + return -EFAULT; + + switch (new_line.clock_type) + { + case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break; + case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break; + case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break; + case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break; + case CLOCK_DEFAULT: flags = info->params.flags & + (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | + HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | + HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | + HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break; + default: return -EINVAL; + } + + if (new_line.loopback != 0 && new_line.loopback != 1) + return -EINVAL; + + info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | + HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | + HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | + HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); + info->params.flags |= flags; + + info->params.loopback = new_line.loopback; + + if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG)) + info->params.clock_speed = new_line.clock_rate; + else + info->params.clock_speed = 0; + + /* if network interface up, reprogram hardware */ + if (info->netcount) + program_hw(info); + return 0; + + default: + return hdlc_ioctl(dev, ifr, cmd); + } +} + +/** + * hdlcdev_tx_timeout - called by network layer when transmit timeout is detected + * @dev: pointer to network device structure + */ +static void hdlcdev_tx_timeout(struct net_device *dev, unsigned int txqueue) +{ + SLMP_INFO *info = dev_to_port(dev); + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("hdlcdev_tx_timeout(%s)\n",dev->name); + + dev->stats.tx_errors++; + dev->stats.tx_aborted_errors++; + + spin_lock_irqsave(&info->lock,flags); + tx_stop(info); + spin_unlock_irqrestore(&info->lock,flags); + + netif_wake_queue(dev); +} + +/** + * hdlcdev_tx_done - called by device driver when transmit completes + * @info: pointer to device instance information + * + * Reenable network layer transmit if stopped. + */ +static void hdlcdev_tx_done(SLMP_INFO *info) +{ + if (netif_queue_stopped(info->netdev)) + netif_wake_queue(info->netdev); +} + +/** + * hdlcdev_rx - called by device driver when frame received + * @info: pointer to device instance information + * @buf: pointer to buffer contianing frame data + * @size: count of data bytes in buf + * + * Pass frame to network layer. + */ +static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size) +{ + struct sk_buff *skb = dev_alloc_skb(size); + struct net_device *dev = info->netdev; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("hdlcdev_rx(%s)\n",dev->name); + + if (skb == NULL) { + printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n", + dev->name); + dev->stats.rx_dropped++; + return; + } + + skb_put_data(skb, buf, size); + + skb->protocol = hdlc_type_trans(skb, dev); + + dev->stats.rx_packets++; + dev->stats.rx_bytes += size; + + netif_rx(skb); +} + +static const struct net_device_ops hdlcdev_ops = { + .ndo_open = hdlcdev_open, + .ndo_stop = hdlcdev_close, + .ndo_start_xmit = hdlc_start_xmit, + .ndo_do_ioctl = hdlcdev_ioctl, + .ndo_tx_timeout = hdlcdev_tx_timeout, +}; + +/** + * hdlcdev_init - called by device driver when adding device instance + * @info: pointer to device instance information + * + * Do generic HDLC initialization. + * + * Return: 0 if success, otherwise error code + */ +static int hdlcdev_init(SLMP_INFO *info) +{ + int rc; + struct net_device *dev; + hdlc_device *hdlc; + + /* allocate and initialize network and HDLC layer objects */ + + dev = alloc_hdlcdev(info); + if (!dev) { + printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__); + return -ENOMEM; + } + + /* for network layer reporting purposes only */ + dev->mem_start = info->phys_sca_base; + dev->mem_end = info->phys_sca_base + SCA_BASE_SIZE - 1; + dev->irq = info->irq_level; + + /* network layer callbacks and settings */ + dev->netdev_ops = &hdlcdev_ops; + dev->watchdog_timeo = 10 * HZ; + dev->tx_queue_len = 50; + + /* generic HDLC layer callbacks and settings */ + hdlc = dev_to_hdlc(dev); + hdlc->attach = hdlcdev_attach; + hdlc->xmit = hdlcdev_xmit; + + /* register objects with HDLC layer */ + rc = register_hdlc_device(dev); + if (rc) { + printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__); + free_netdev(dev); + return rc; + } + + info->netdev = dev; + return 0; +} + +/** + * hdlcdev_exit - called by device driver when removing device instance + * @info: pointer to device instance information + * + * Do generic HDLC cleanup. + */ +static void hdlcdev_exit(SLMP_INFO *info) +{ + unregister_hdlc_device(info->netdev); + free_netdev(info->netdev); + info->netdev = NULL; +} + +#endif /* CONFIG_HDLC */ + + +/* Return next bottom half action to perform. + * Return Value: BH action code or 0 if nothing to do. + */ +static int bh_action(SLMP_INFO *info) +{ + unsigned long flags; + int rc = 0; + + spin_lock_irqsave(&info->lock,flags); + + if (info->pending_bh & BH_RECEIVE) { + info->pending_bh &= ~BH_RECEIVE; + rc = BH_RECEIVE; + } else if (info->pending_bh & BH_TRANSMIT) { + info->pending_bh &= ~BH_TRANSMIT; + rc = BH_TRANSMIT; + } else if (info->pending_bh & BH_STATUS) { + info->pending_bh &= ~BH_STATUS; + rc = BH_STATUS; + } + + if (!rc) { + /* Mark BH routine as complete */ + info->bh_running = false; + info->bh_requested = false; + } + + spin_unlock_irqrestore(&info->lock,flags); + + return rc; +} + +/* Perform bottom half processing of work items queued by ISR. + */ +static void bh_handler(struct work_struct *work) +{ + SLMP_INFO *info = container_of(work, SLMP_INFO, task); + int action; + + if ( debug_level >= DEBUG_LEVEL_BH ) + printk( "%s(%d):%s bh_handler() entry\n", + __FILE__,__LINE__,info->device_name); + + info->bh_running = true; + + while((action = bh_action(info)) != 0) { + + /* Process work item */ + if ( debug_level >= DEBUG_LEVEL_BH ) + printk( "%s(%d):%s bh_handler() work item action=%d\n", + __FILE__,__LINE__,info->device_name, action); + + switch (action) { + + case BH_RECEIVE: + bh_receive(info); + break; + case BH_TRANSMIT: + bh_transmit(info); + break; + case BH_STATUS: + bh_status(info); + break; + default: + /* unknown work item ID */ + printk("%s(%d):%s Unknown work item ID=%08X!\n", + __FILE__,__LINE__,info->device_name,action); + break; + } + } + + if ( debug_level >= DEBUG_LEVEL_BH ) + printk( "%s(%d):%s bh_handler() exit\n", + __FILE__,__LINE__,info->device_name); +} + +static void bh_receive(SLMP_INFO *info) +{ + if ( debug_level >= DEBUG_LEVEL_BH ) + printk( "%s(%d):%s bh_receive()\n", + __FILE__,__LINE__,info->device_name); + + while( rx_get_frame(info) ); +} + +static void bh_transmit(SLMP_INFO *info) +{ + struct tty_struct *tty = info->port.tty; + + if ( debug_level >= DEBUG_LEVEL_BH ) + printk( "%s(%d):%s bh_transmit() entry\n", + __FILE__,__LINE__,info->device_name); + + if (tty) + tty_wakeup(tty); +} + +static void bh_status(SLMP_INFO *info) +{ + if ( debug_level >= DEBUG_LEVEL_BH ) + printk( "%s(%d):%s bh_status() entry\n", + __FILE__,__LINE__,info->device_name); + + info->ri_chkcount = 0; + info->dsr_chkcount = 0; + info->dcd_chkcount = 0; + info->cts_chkcount = 0; +} + +static void isr_timer(SLMP_INFO * info) +{ + unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0; + + /* IER2<7..4> = timer<3..0> interrupt enables (0=disabled) */ + write_reg(info, IER2, 0); + + /* TMCS, Timer Control/Status Register + * + * 07 CMF, Compare match flag (read only) 1=match + * 06 ECMI, CMF Interrupt Enable: 0=disabled + * 05 Reserved, must be 0 + * 04 TME, Timer Enable + * 03..00 Reserved, must be 0 + * + * 0000 0000 + */ + write_reg(info, (unsigned char)(timer + TMCS), 0); + + info->irq_occurred = true; + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s isr_timer()\n", + __FILE__,__LINE__,info->device_name); +} + +static void isr_rxint(SLMP_INFO * info) +{ + struct tty_struct *tty = info->port.tty; + struct mgsl_icount *icount = &info->icount; + unsigned char status = read_reg(info, SR1) & info->ie1_value & (FLGD + IDLD + CDCD + BRKD); + unsigned char status2 = read_reg(info, SR2) & info->ie2_value & OVRN; + + /* clear status bits */ + if (status) + write_reg(info, SR1, status); + + if (status2) + write_reg(info, SR2, status2); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s isr_rxint status=%02X %02x\n", + __FILE__,__LINE__,info->device_name,status,status2); + + if (info->params.mode == MGSL_MODE_ASYNC) { + if (status & BRKD) { + icount->brk++; + + /* process break detection if tty control + * is not set to ignore it + */ + if (!(status & info->ignore_status_mask1)) { + if (info->read_status_mask1 & BRKD) { + tty_insert_flip_char(&info->port, 0, TTY_BREAK); + if (tty && (info->port.flags & ASYNC_SAK)) + do_SAK(tty); + } + } + } + } + else { + if (status & (FLGD|IDLD)) { + if (status & FLGD) + info->icount.exithunt++; + else if (status & IDLD) + info->icount.rxidle++; + wake_up_interruptible(&info->event_wait_q); + } + } + + if (status & CDCD) { + /* simulate a common modem status change interrupt + * for our handler + */ + get_signals( info ); + isr_io_pin(info, + MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD)); + } +} + +/* + * handle async rx data interrupts + */ +static void isr_rxrdy(SLMP_INFO * info) +{ + u16 status; + unsigned char DataByte; + struct mgsl_icount *icount = &info->icount; + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s isr_rxrdy\n", + __FILE__,__LINE__,info->device_name); + + while((status = read_reg(info,CST0)) & BIT0) + { + int flag = 0; + bool over = false; + DataByte = read_reg(info,TRB); + + icount->rx++; + + if ( status & (PE + FRME + OVRN) ) { + printk("%s(%d):%s rxerr=%04X\n", + __FILE__,__LINE__,info->device_name,status); + + /* update error statistics */ + if (status & PE) + icount->parity++; + else if (status & FRME) + icount->frame++; + else if (status & OVRN) + icount->overrun++; + + /* discard char if tty control flags say so */ + if (status & info->ignore_status_mask2) + continue; + + status &= info->read_status_mask2; + + if (status & PE) + flag = TTY_PARITY; + else if (status & FRME) + flag = TTY_FRAME; + if (status & OVRN) { + /* Overrun is special, since it's + * reported immediately, and doesn't + * affect the current character + */ + over = true; + } + } /* end of if (error) */ + + tty_insert_flip_char(&info->port, DataByte, flag); + if (over) + tty_insert_flip_char(&info->port, 0, TTY_OVERRUN); + } + + if ( debug_level >= DEBUG_LEVEL_ISR ) { + printk("%s(%d):%s rx=%d brk=%d parity=%d frame=%d overrun=%d\n", + __FILE__,__LINE__,info->device_name, + icount->rx,icount->brk,icount->parity, + icount->frame,icount->overrun); + } + + tty_flip_buffer_push(&info->port); +} + +static void isr_txeom(SLMP_INFO * info, unsigned char status) +{ + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s isr_txeom status=%02x\n", + __FILE__,__LINE__,info->device_name,status); + + write_reg(info, TXDMA + DIR, 0x00); /* disable Tx DMA IRQs */ + write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */ + write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */ + + if (status & UDRN) { + write_reg(info, CMD, TXRESET); + write_reg(info, CMD, TXENABLE); + } else + write_reg(info, CMD, TXBUFCLR); + + /* disable and clear tx interrupts */ + info->ie0_value &= ~TXRDYE; + info->ie1_value &= ~(IDLE + UDRN); + write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value)); + write_reg(info, SR1, (unsigned char)(UDRN + IDLE)); + + if ( info->tx_active ) { + if (info->params.mode != MGSL_MODE_ASYNC) { + if (status & UDRN) + info->icount.txunder++; + else if (status & IDLE) + info->icount.txok++; + } + + info->tx_active = false; + info->tx_count = info->tx_put = info->tx_get = 0; + + del_timer(&info->tx_timer); + + if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done ) { + info->serial_signals &= ~SerialSignal_RTS; + info->drop_rts_on_tx_done = false; + set_signals(info); + } + +#if SYNCLINK_GENERIC_HDLC + if (info->netcount) + hdlcdev_tx_done(info); + else +#endif + { + if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) { + tx_stop(info); + return; + } + info->pending_bh |= BH_TRANSMIT; + } + } +} + + +/* + * handle tx status interrupts + */ +static void isr_txint(SLMP_INFO * info) +{ + unsigned char status = read_reg(info, SR1) & info->ie1_value & (UDRN + IDLE + CCTS); + + /* clear status bits */ + write_reg(info, SR1, status); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s isr_txint status=%02x\n", + __FILE__,__LINE__,info->device_name,status); + + if (status & (UDRN + IDLE)) + isr_txeom(info, status); + + if (status & CCTS) { + /* simulate a common modem status change interrupt + * for our handler + */ + get_signals( info ); + isr_io_pin(info, + MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS)); + + } +} + +/* + * handle async tx data interrupts + */ +static void isr_txrdy(SLMP_INFO * info) +{ + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s isr_txrdy() tx_count=%d\n", + __FILE__,__LINE__,info->device_name,info->tx_count); + + if (info->params.mode != MGSL_MODE_ASYNC) { + /* disable TXRDY IRQ, enable IDLE IRQ */ + info->ie0_value &= ~TXRDYE; + info->ie1_value |= IDLE; + write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value)); + return; + } + + if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) { + tx_stop(info); + return; + } + + if ( info->tx_count ) + tx_load_fifo( info ); + else { + info->tx_active = false; + info->ie0_value &= ~TXRDYE; + write_reg(info, IE0, info->ie0_value); + } + + if (info->tx_count < WAKEUP_CHARS) + info->pending_bh |= BH_TRANSMIT; +} + +static void isr_rxdmaok(SLMP_INFO * info) +{ + /* BIT7 = EOT (end of transfer) + * BIT6 = EOM (end of message/frame) + */ + unsigned char status = read_reg(info,RXDMA + DSR) & 0xc0; + + /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */ + write_reg(info, RXDMA + DSR, (unsigned char)(status | 1)); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s isr_rxdmaok(), status=%02x\n", + __FILE__,__LINE__,info->device_name,status); + + info->pending_bh |= BH_RECEIVE; +} + +static void isr_rxdmaerror(SLMP_INFO * info) +{ + /* BIT5 = BOF (buffer overflow) + * BIT4 = COF (counter overflow) + */ + unsigned char status = read_reg(info,RXDMA + DSR) & 0x30; + + /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */ + write_reg(info, RXDMA + DSR, (unsigned char)(status | 1)); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s isr_rxdmaerror(), status=%02x\n", + __FILE__,__LINE__,info->device_name,status); + + info->rx_overflow = true; + info->pending_bh |= BH_RECEIVE; +} + +static void isr_txdmaok(SLMP_INFO * info) +{ + unsigned char status_reg1 = read_reg(info, SR1); + + write_reg(info, TXDMA + DIR, 0x00); /* disable Tx DMA IRQs */ + write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */ + write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */ + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s isr_txdmaok(), status=%02x\n", + __FILE__,__LINE__,info->device_name,status_reg1); + + /* program TXRDY as FIFO empty flag, enable TXRDY IRQ */ + write_reg16(info, TRC0, 0); + info->ie0_value |= TXRDYE; + write_reg(info, IE0, info->ie0_value); +} + +static void isr_txdmaerror(SLMP_INFO * info) +{ + /* BIT5 = BOF (buffer overflow) + * BIT4 = COF (counter overflow) + */ + unsigned char status = read_reg(info,TXDMA + DSR) & 0x30; + + /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */ + write_reg(info, TXDMA + DSR, (unsigned char)(status | 1)); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s isr_txdmaerror(), status=%02x\n", + __FILE__,__LINE__,info->device_name,status); +} + +/* handle input serial signal changes + */ +static void isr_io_pin( SLMP_INFO *info, u16 status ) +{ + struct mgsl_icount *icount; + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):isr_io_pin status=%04X\n", + __FILE__,__LINE__,status); + + if (status & (MISCSTATUS_CTS_LATCHED | MISCSTATUS_DCD_LATCHED | + MISCSTATUS_DSR_LATCHED | MISCSTATUS_RI_LATCHED) ) { + icount = &info->icount; + /* update input line counters */ + if (status & MISCSTATUS_RI_LATCHED) { + icount->rng++; + if ( status & SerialSignal_RI ) + info->input_signal_events.ri_up++; + else + info->input_signal_events.ri_down++; + } + if (status & MISCSTATUS_DSR_LATCHED) { + icount->dsr++; + if ( status & SerialSignal_DSR ) + info->input_signal_events.dsr_up++; + else + info->input_signal_events.dsr_down++; + } + if (status & MISCSTATUS_DCD_LATCHED) { + if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) { + info->ie1_value &= ~CDCD; + write_reg(info, IE1, info->ie1_value); + } + icount->dcd++; + if (status & SerialSignal_DCD) { + info->input_signal_events.dcd_up++; + } else + info->input_signal_events.dcd_down++; +#if SYNCLINK_GENERIC_HDLC + if (info->netcount) { + if (status & SerialSignal_DCD) + netif_carrier_on(info->netdev); + else + netif_carrier_off(info->netdev); + } +#endif + } + if (status & MISCSTATUS_CTS_LATCHED) + { + if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) { + info->ie1_value &= ~CCTS; + write_reg(info, IE1, info->ie1_value); + } + icount->cts++; + if ( status & SerialSignal_CTS ) + info->input_signal_events.cts_up++; + else + info->input_signal_events.cts_down++; + } + wake_up_interruptible(&info->status_event_wait_q); + wake_up_interruptible(&info->event_wait_q); + + if (tty_port_check_carrier(&info->port) && + (status & MISCSTATUS_DCD_LATCHED) ) { + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s CD now %s...", info->device_name, + (status & SerialSignal_DCD) ? "on" : "off"); + if (status & SerialSignal_DCD) + wake_up_interruptible(&info->port.open_wait); + else { + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("doing serial hangup..."); + if (info->port.tty) + tty_hangup(info->port.tty); + } + } + + if (tty_port_cts_enabled(&info->port) && + (status & MISCSTATUS_CTS_LATCHED) ) { + if ( info->port.tty ) { + if (info->port.tty->hw_stopped) { + if (status & SerialSignal_CTS) { + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("CTS tx start..."); + info->port.tty->hw_stopped = 0; + tx_start(info); + info->pending_bh |= BH_TRANSMIT; + return; + } + } else { + if (!(status & SerialSignal_CTS)) { + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("CTS tx stop..."); + info->port.tty->hw_stopped = 1; + tx_stop(info); + } + } + } + } + } + + info->pending_bh |= BH_STATUS; +} + +/* Interrupt service routine entry point. + * + * Arguments: + * irq interrupt number that caused interrupt + * dev_id device ID supplied during interrupt registration + * regs interrupted processor context + */ +static irqreturn_t synclinkmp_interrupt(int dummy, void *dev_id) +{ + SLMP_INFO *info = dev_id; + unsigned char status, status0, status1=0; + unsigned char dmastatus, dmastatus0, dmastatus1=0; + unsigned char timerstatus0, timerstatus1=0; + unsigned char shift; + unsigned int i; + unsigned short tmp; + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk(KERN_DEBUG "%s(%d): synclinkmp_interrupt(%d)entry.\n", + __FILE__, __LINE__, info->irq_level); + + spin_lock(&info->lock); + + for(;;) { + + /* get status for SCA0 (ports 0-1) */ + tmp = read_reg16(info, ISR0); /* get ISR0 and ISR1 in one read */ + status0 = (unsigned char)tmp; + dmastatus0 = (unsigned char)(tmp>>8); + timerstatus0 = read_reg(info, ISR2); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk(KERN_DEBUG "%s(%d):%s status0=%02x, dmastatus0=%02x, timerstatus0=%02x\n", + __FILE__, __LINE__, info->device_name, + status0, dmastatus0, timerstatus0); + + if (info->port_count == 4) { + /* get status for SCA1 (ports 2-3) */ + tmp = read_reg16(info->port_array[2], ISR0); + status1 = (unsigned char)tmp; + dmastatus1 = (unsigned char)(tmp>>8); + timerstatus1 = read_reg(info->port_array[2], ISR2); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s status1=%02x, dmastatus1=%02x, timerstatus1=%02x\n", + __FILE__,__LINE__,info->device_name, + status1,dmastatus1,timerstatus1); + } + + if (!status0 && !dmastatus0 && !timerstatus0 && + !status1 && !dmastatus1 && !timerstatus1) + break; + + for(i=0; i < info->port_count ; i++) { + if (info->port_array[i] == NULL) + continue; + if (i < 2) { + status = status0; + dmastatus = dmastatus0; + } else { + status = status1; + dmastatus = dmastatus1; + } + + shift = i & 1 ? 4 :0; + + if (status & BIT0 << shift) + isr_rxrdy(info->port_array[i]); + if (status & BIT1 << shift) + isr_txrdy(info->port_array[i]); + if (status & BIT2 << shift) + isr_rxint(info->port_array[i]); + if (status & BIT3 << shift) + isr_txint(info->port_array[i]); + + if (dmastatus & BIT0 << shift) + isr_rxdmaerror(info->port_array[i]); + if (dmastatus & BIT1 << shift) + isr_rxdmaok(info->port_array[i]); + if (dmastatus & BIT2 << shift) + isr_txdmaerror(info->port_array[i]); + if (dmastatus & BIT3 << shift) + isr_txdmaok(info->port_array[i]); + } + + if (timerstatus0 & (BIT5 | BIT4)) + isr_timer(info->port_array[0]); + if (timerstatus0 & (BIT7 | BIT6)) + isr_timer(info->port_array[1]); + if (timerstatus1 & (BIT5 | BIT4)) + isr_timer(info->port_array[2]); + if (timerstatus1 & (BIT7 | BIT6)) + isr_timer(info->port_array[3]); + } + + for(i=0; i < info->port_count ; i++) { + SLMP_INFO * port = info->port_array[i]; + + /* Request bottom half processing if there's something + * for it to do and the bh is not already running. + * + * Note: startup adapter diags require interrupts. + * do not request bottom half processing if the + * device is not open in a normal mode. + */ + if ( port && (port->port.count || port->netcount) && + port->pending_bh && !port->bh_running && + !port->bh_requested ) { + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s queueing bh task.\n", + __FILE__,__LINE__,port->device_name); + schedule_work(&port->task); + port->bh_requested = true; + } + } + + spin_unlock(&info->lock); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk(KERN_DEBUG "%s(%d):synclinkmp_interrupt(%d)exit.\n", + __FILE__, __LINE__, info->irq_level); + return IRQ_HANDLED; +} + +/* Initialize and start device. + */ +static int startup(SLMP_INFO * info) +{ + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk("%s(%d):%s tx_releaseup()\n",__FILE__,__LINE__,info->device_name); + + if (tty_port_initialized(&info->port)) + return 0; + + if (!info->tx_buf) { + info->tx_buf = kmalloc(info->max_frame_size, GFP_KERNEL); + if (!info->tx_buf) { + printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n", + __FILE__,__LINE__,info->device_name); + return -ENOMEM; + } + } + + info->pending_bh = 0; + + memset(&info->icount, 0, sizeof(info->icount)); + + /* program hardware for current parameters */ + reset_port(info); + + change_params(info); + + mod_timer(&info->status_timer, jiffies + msecs_to_jiffies(10)); + + if (info->port.tty) + clear_bit(TTY_IO_ERROR, &info->port.tty->flags); + + tty_port_set_initialized(&info->port, 1); + + return 0; +} + +/* Called by close() and hangup() to shutdown hardware + */ +static void shutdown(SLMP_INFO * info) +{ + unsigned long flags; + + if (!tty_port_initialized(&info->port)) + return; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s synclinkmp_shutdown()\n", + __FILE__,__LINE__, info->device_name ); + + /* clear status wait queue because status changes */ + /* can't happen after shutting down the hardware */ + wake_up_interruptible(&info->status_event_wait_q); + wake_up_interruptible(&info->event_wait_q); + + del_timer(&info->tx_timer); + del_timer(&info->status_timer); + + kfree(info->tx_buf); + info->tx_buf = NULL; + + spin_lock_irqsave(&info->lock,flags); + + reset_port(info); + + if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) { + info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR); + set_signals(info); + } + + spin_unlock_irqrestore(&info->lock,flags); + + if (info->port.tty) + set_bit(TTY_IO_ERROR, &info->port.tty->flags); + + tty_port_set_initialized(&info->port, 0); +} + +static void program_hw(SLMP_INFO *info) +{ + unsigned long flags; + + spin_lock_irqsave(&info->lock,flags); + + rx_stop(info); + tx_stop(info); + + info->tx_count = info->tx_put = info->tx_get = 0; + + if (info->params.mode == MGSL_MODE_HDLC || info->netcount) + hdlc_mode(info); + else + async_mode(info); + + set_signals(info); + + info->dcd_chkcount = 0; + info->cts_chkcount = 0; + info->ri_chkcount = 0; + info->dsr_chkcount = 0; + + info->ie1_value |= (CDCD|CCTS); + write_reg(info, IE1, info->ie1_value); + + get_signals(info); + + if (info->netcount || (info->port.tty && info->port.tty->termios.c_cflag & CREAD) ) + rx_start(info); + + spin_unlock_irqrestore(&info->lock,flags); +} + +/* Reconfigure adapter based on new parameters + */ +static void change_params(SLMP_INFO *info) +{ + unsigned cflag; + int bits_per_char; + + if (!info->port.tty) + return; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s change_params()\n", + __FILE__,__LINE__, info->device_name ); + + cflag = info->port.tty->termios.c_cflag; + + /* if B0 rate (hangup) specified then negate RTS and DTR */ + /* otherwise assert RTS and DTR */ + if (cflag & CBAUD) + info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR; + else + info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR); + + /* byte size and parity */ + + switch (cflag & CSIZE) { + case CS5: info->params.data_bits = 5; break; + case CS6: info->params.data_bits = 6; break; + case CS7: info->params.data_bits = 7; break; + case CS8: info->params.data_bits = 8; break; + /* Never happens, but GCC is too dumb to figure it out */ + default: info->params.data_bits = 7; break; + } + + if (cflag & CSTOPB) + info->params.stop_bits = 2; + else + info->params.stop_bits = 1; + + info->params.parity = ASYNC_PARITY_NONE; + if (cflag & PARENB) { + if (cflag & PARODD) + info->params.parity = ASYNC_PARITY_ODD; + else + info->params.parity = ASYNC_PARITY_EVEN; +#ifdef CMSPAR + if (cflag & CMSPAR) + info->params.parity = ASYNC_PARITY_SPACE; +#endif + } + + /* calculate number of jiffies to transmit a full + * FIFO (32 bytes) at specified data rate + */ + bits_per_char = info->params.data_bits + + info->params.stop_bits + 1; + + /* if port data rate is set to 460800 or less then + * allow tty settings to override, otherwise keep the + * current data rate. + */ + if (info->params.data_rate <= 460800) { + info->params.data_rate = tty_get_baud_rate(info->port.tty); + } + + if ( info->params.data_rate ) { + info->timeout = (32*HZ*bits_per_char) / + info->params.data_rate; + } + info->timeout += HZ/50; /* Add .02 seconds of slop */ + + tty_port_set_cts_flow(&info->port, cflag & CRTSCTS); + tty_port_set_check_carrier(&info->port, ~cflag & CLOCAL); + + /* process tty input control flags */ + + info->read_status_mask2 = OVRN; + if (I_INPCK(info->port.tty)) + info->read_status_mask2 |= PE | FRME; + if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) + info->read_status_mask1 |= BRKD; + if (I_IGNPAR(info->port.tty)) + info->ignore_status_mask2 |= PE | FRME; + if (I_IGNBRK(info->port.tty)) { + info->ignore_status_mask1 |= BRKD; + /* If ignoring parity and break indicators, ignore + * overruns too. (For real raw support). + */ + if (I_IGNPAR(info->port.tty)) + info->ignore_status_mask2 |= OVRN; + } + + program_hw(info); +} + +static int get_stats(SLMP_INFO * info, struct mgsl_icount __user *user_icount) +{ + int err; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s get_params()\n", + __FILE__,__LINE__, info->device_name); + + if (!user_icount) { + memset(&info->icount, 0, sizeof(info->icount)); + } else { + mutex_lock(&info->port.mutex); + COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount)); + mutex_unlock(&info->port.mutex); + if (err) + return -EFAULT; + } + + return 0; +} + +static int get_params(SLMP_INFO * info, MGSL_PARAMS __user *user_params) +{ + int err; + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s get_params()\n", + __FILE__,__LINE__, info->device_name); + + mutex_lock(&info->port.mutex); + COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS)); + mutex_unlock(&info->port.mutex); + if (err) { + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):%s get_params() user buffer copy failed\n", + __FILE__,__LINE__,info->device_name); + return -EFAULT; + } + + return 0; +} + +static int set_params(SLMP_INFO * info, MGSL_PARAMS __user *new_params) +{ + unsigned long flags; + MGSL_PARAMS tmp_params; + int err; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s set_params\n", + __FILE__,__LINE__,info->device_name ); + COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS)); + if (err) { + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):%s set_params() user buffer copy failed\n", + __FILE__,__LINE__,info->device_name); + return -EFAULT; + } + + mutex_lock(&info->port.mutex); + spin_lock_irqsave(&info->lock,flags); + memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS)); + spin_unlock_irqrestore(&info->lock,flags); + + change_params(info); + mutex_unlock(&info->port.mutex); + + return 0; +} + +static int get_txidle(SLMP_INFO * info, int __user *idle_mode) +{ + int err; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s get_txidle()=%d\n", + __FILE__,__LINE__, info->device_name, info->idle_mode); + + COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int)); + if (err) { + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):%s get_txidle() user buffer copy failed\n", + __FILE__,__LINE__,info->device_name); + return -EFAULT; + } + + return 0; +} + +static int set_txidle(SLMP_INFO * info, int idle_mode) +{ + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s set_txidle(%d)\n", + __FILE__,__LINE__,info->device_name, idle_mode ); + + spin_lock_irqsave(&info->lock,flags); + info->idle_mode = idle_mode; + tx_set_idle( info ); + spin_unlock_irqrestore(&info->lock,flags); + return 0; +} + +static int tx_enable(SLMP_INFO * info, int enable) +{ + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s tx_enable(%d)\n", + __FILE__,__LINE__,info->device_name, enable); + + spin_lock_irqsave(&info->lock,flags); + if ( enable ) { + if ( !info->tx_enabled ) { + tx_start(info); + } + } else { + if ( info->tx_enabled ) + tx_stop(info); + } + spin_unlock_irqrestore(&info->lock,flags); + return 0; +} + +/* abort send HDLC frame + */ +static int tx_abort(SLMP_INFO * info) +{ + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s tx_abort()\n", + __FILE__,__LINE__,info->device_name); + + spin_lock_irqsave(&info->lock,flags); + if ( info->tx_active && info->params.mode == MGSL_MODE_HDLC ) { + info->ie1_value &= ~UDRN; + info->ie1_value |= IDLE; + write_reg(info, IE1, info->ie1_value); /* disable tx status interrupts */ + write_reg(info, SR1, (unsigned char)(IDLE + UDRN)); /* clear pending */ + + write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */ + write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */ + + write_reg(info, CMD, TXABORT); + } + spin_unlock_irqrestore(&info->lock,flags); + return 0; +} + +static int rx_enable(SLMP_INFO * info, int enable) +{ + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s rx_enable(%d)\n", + __FILE__,__LINE__,info->device_name,enable); + + spin_lock_irqsave(&info->lock,flags); + if ( enable ) { + if ( !info->rx_enabled ) + rx_start(info); + } else { + if ( info->rx_enabled ) + rx_stop(info); + } + spin_unlock_irqrestore(&info->lock,flags); + return 0; +} + +/* wait for specified event to occur + */ +static int wait_mgsl_event(SLMP_INFO * info, int __user *mask_ptr) +{ + unsigned long flags; + int s; + int rc=0; + struct mgsl_icount cprev, cnow; + int events; + int mask; + struct _input_signal_events oldsigs, newsigs; + DECLARE_WAITQUEUE(wait, current); + + COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int)); + if (rc) { + return -EFAULT; + } + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s wait_mgsl_event(%d)\n", + __FILE__,__LINE__,info->device_name,mask); + + spin_lock_irqsave(&info->lock,flags); + + /* return immediately if state matches requested events */ + get_signals(info); + s = info->serial_signals; + + events = mask & + ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) + + ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) + + ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) + + ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) ); + if (events) { + spin_unlock_irqrestore(&info->lock,flags); + goto exit; + } + + /* save current irq counts */ + cprev = info->icount; + oldsigs = info->input_signal_events; + + /* enable hunt and idle irqs if needed */ + if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) { + unsigned char oldval = info->ie1_value; + unsigned char newval = oldval + + (mask & MgslEvent_ExitHuntMode ? FLGD:0) + + (mask & MgslEvent_IdleReceived ? IDLD:0); + if ( oldval != newval ) { + info->ie1_value = newval; + write_reg(info, IE1, info->ie1_value); + } + } + + set_current_state(TASK_INTERRUPTIBLE); + add_wait_queue(&info->event_wait_q, &wait); + + spin_unlock_irqrestore(&info->lock,flags); + + for(;;) { + schedule(); + if (signal_pending(current)) { + rc = -ERESTARTSYS; + break; + } + + /* get current irq counts */ + spin_lock_irqsave(&info->lock,flags); + cnow = info->icount; + newsigs = info->input_signal_events; + set_current_state(TASK_INTERRUPTIBLE); + spin_unlock_irqrestore(&info->lock,flags); + + /* if no change, wait aborted for some reason */ + if (newsigs.dsr_up == oldsigs.dsr_up && + newsigs.dsr_down == oldsigs.dsr_down && + newsigs.dcd_up == oldsigs.dcd_up && + newsigs.dcd_down == oldsigs.dcd_down && + newsigs.cts_up == oldsigs.cts_up && + newsigs.cts_down == oldsigs.cts_down && + newsigs.ri_up == oldsigs.ri_up && + newsigs.ri_down == oldsigs.ri_down && + cnow.exithunt == cprev.exithunt && + cnow.rxidle == cprev.rxidle) { + rc = -EIO; + break; + } + + events = mask & + ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) + + (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) + + (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) + + (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) + + (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) + + (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) + + (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) + + (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) + + (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) + + (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) ); + if (events) + break; + + cprev = cnow; + oldsigs = newsigs; + } + + remove_wait_queue(&info->event_wait_q, &wait); + set_current_state(TASK_RUNNING); + + + if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) { + spin_lock_irqsave(&info->lock,flags); + if (!waitqueue_active(&info->event_wait_q)) { + /* disable enable exit hunt mode/idle rcvd IRQs */ + info->ie1_value &= ~(FLGD|IDLD); + write_reg(info, IE1, info->ie1_value); + } + spin_unlock_irqrestore(&info->lock,flags); + } +exit: + if ( rc == 0 ) + PUT_USER(rc, events, mask_ptr); + + return rc; +} + +static int modem_input_wait(SLMP_INFO *info,int arg) +{ + unsigned long flags; + int rc; + struct mgsl_icount cprev, cnow; + DECLARE_WAITQUEUE(wait, current); + + /* save current irq counts */ + spin_lock_irqsave(&info->lock,flags); + cprev = info->icount; + add_wait_queue(&info->status_event_wait_q, &wait); + set_current_state(TASK_INTERRUPTIBLE); + spin_unlock_irqrestore(&info->lock,flags); + + for(;;) { + schedule(); + if (signal_pending(current)) { + rc = -ERESTARTSYS; + break; + } + + /* get new irq counts */ + spin_lock_irqsave(&info->lock,flags); + cnow = info->icount; + set_current_state(TASK_INTERRUPTIBLE); + spin_unlock_irqrestore(&info->lock,flags); + + /* if no change, wait aborted for some reason */ + if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && + cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) { + rc = -EIO; + break; + } + + /* check for change in caller specified modem input */ + if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) || + (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) || + (arg & TIOCM_CD && cnow.dcd != cprev.dcd) || + (arg & TIOCM_CTS && cnow.cts != cprev.cts)) { + rc = 0; + break; + } + + cprev = cnow; + } + remove_wait_queue(&info->status_event_wait_q, &wait); + set_current_state(TASK_RUNNING); + return rc; +} + +/* return the state of the serial control and status signals + */ +static int tiocmget(struct tty_struct *tty) +{ + SLMP_INFO *info = tty->driver_data; + unsigned int result; + unsigned long flags; + + spin_lock_irqsave(&info->lock,flags); + get_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + + result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS : 0) | + ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR : 0) | + ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR : 0) | + ((info->serial_signals & SerialSignal_RI) ? TIOCM_RNG : 0) | + ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR : 0) | + ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS : 0); + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s tiocmget() value=%08X\n", + __FILE__,__LINE__, info->device_name, result ); + return result; +} + +/* set modem control signals (DTR/RTS) + */ +static int tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + SLMP_INFO *info = tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s tiocmset(%x,%x)\n", + __FILE__,__LINE__,info->device_name, set, clear); + + if (set & TIOCM_RTS) + info->serial_signals |= SerialSignal_RTS; + if (set & TIOCM_DTR) + info->serial_signals |= SerialSignal_DTR; + if (clear & TIOCM_RTS) + info->serial_signals &= ~SerialSignal_RTS; + if (clear & TIOCM_DTR) + info->serial_signals &= ~SerialSignal_DTR; + + spin_lock_irqsave(&info->lock,flags); + set_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + + return 0; +} + +static int carrier_raised(struct tty_port *port) +{ + SLMP_INFO *info = container_of(port, SLMP_INFO, port); + unsigned long flags; + + spin_lock_irqsave(&info->lock,flags); + get_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + + return (info->serial_signals & SerialSignal_DCD) ? 1 : 0; +} + +static void dtr_rts(struct tty_port *port, int on) +{ + SLMP_INFO *info = container_of(port, SLMP_INFO, port); + unsigned long flags; + + spin_lock_irqsave(&info->lock,flags); + if (on) + info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR; + else + info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR); + set_signals(info); + spin_unlock_irqrestore(&info->lock,flags); +} + +/* Block the current process until the specified port is ready to open. + */ +static int block_til_ready(struct tty_struct *tty, struct file *filp, + SLMP_INFO *info) +{ + DECLARE_WAITQUEUE(wait, current); + int retval; + bool do_clocal = false; + unsigned long flags; + int cd; + struct tty_port *port = &info->port; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s block_til_ready()\n", + __FILE__,__LINE__, tty->driver->name ); + + if (filp->f_flags & O_NONBLOCK || tty_io_error(tty)) { + /* nonblock mode is set or port is not enabled */ + /* just verify that callout device is not active */ + tty_port_set_active(port, 1); + return 0; + } + + if (C_CLOCAL(tty)) + do_clocal = true; + + /* Wait for carrier detect and the line to become + * free (i.e., not in use by the callout). While we are in + * this loop, port->count is dropped by one, so that + * close() knows when to free things. We restore it upon + * exit, either normal or abnormal. + */ + + retval = 0; + add_wait_queue(&port->open_wait, &wait); + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s block_til_ready() before block, count=%d\n", + __FILE__,__LINE__, tty->driver->name, port->count ); + + spin_lock_irqsave(&info->lock, flags); + port->count--; + spin_unlock_irqrestore(&info->lock, flags); + port->blocked_open++; + + while (1) { + if (C_BAUD(tty) && tty_port_initialized(port)) + tty_port_raise_dtr_rts(port); + + set_current_state(TASK_INTERRUPTIBLE); + + if (tty_hung_up_p(filp) || !tty_port_initialized(port)) { + retval = (port->flags & ASYNC_HUP_NOTIFY) ? + -EAGAIN : -ERESTARTSYS; + break; + } + + cd = tty_port_carrier_raised(port); + if (do_clocal || cd) + break; + + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s block_til_ready() count=%d\n", + __FILE__,__LINE__, tty->driver->name, port->count ); + + tty_unlock(tty); + schedule(); + tty_lock(tty); + } + + set_current_state(TASK_RUNNING); + remove_wait_queue(&port->open_wait, &wait); + if (!tty_hung_up_p(filp)) + port->count++; + port->blocked_open--; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s block_til_ready() after, count=%d\n", + __FILE__,__LINE__, tty->driver->name, port->count ); + + if (!retval) + tty_port_set_active(port, 1); + + return retval; +} + +static int alloc_dma_bufs(SLMP_INFO *info) +{ + unsigned short BuffersPerFrame; + unsigned short BufferCount; + + // Force allocation to start at 64K boundary for each port. + // This is necessary because *all* buffer descriptors for a port + // *must* be in the same 64K block. All descriptors on a port + // share a common 'base' address (upper 8 bits of 24 bits) programmed + // into the CBP register. + info->port_array[0]->last_mem_alloc = (SCA_MEM_SIZE/4) * info->port_num; + + /* Calculate the number of DMA buffers necessary to hold the */ + /* largest allowable frame size. Note: If the max frame size is */ + /* not an even multiple of the DMA buffer size then we need to */ + /* round the buffer count per frame up one. */ + + BuffersPerFrame = (unsigned short)(info->max_frame_size/SCABUFSIZE); + if ( info->max_frame_size % SCABUFSIZE ) + BuffersPerFrame++; + + /* calculate total number of data buffers (SCABUFSIZE) possible + * in one ports memory (SCA_MEM_SIZE/4) after allocating memory + * for the descriptor list (BUFFERLISTSIZE). + */ + BufferCount = (SCA_MEM_SIZE/4 - BUFFERLISTSIZE)/SCABUFSIZE; + + /* limit number of buffers to maximum amount of descriptors */ + if (BufferCount > BUFFERLISTSIZE/sizeof(SCADESC)) + BufferCount = BUFFERLISTSIZE/sizeof(SCADESC); + + /* use enough buffers to transmit one max size frame */ + info->tx_buf_count = BuffersPerFrame + 1; + + /* never use more than half the available buffers for transmit */ + if (info->tx_buf_count > (BufferCount/2)) + info->tx_buf_count = BufferCount/2; + + if (info->tx_buf_count > SCAMAXDESC) + info->tx_buf_count = SCAMAXDESC; + + /* use remaining buffers for receive */ + info->rx_buf_count = BufferCount - info->tx_buf_count; + + if (info->rx_buf_count > SCAMAXDESC) + info->rx_buf_count = SCAMAXDESC; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk("%s(%d):%s Allocating %d TX and %d RX DMA buffers.\n", + __FILE__,__LINE__, info->device_name, + info->tx_buf_count,info->rx_buf_count); + + if ( alloc_buf_list( info ) < 0 || + alloc_frame_bufs(info, + info->rx_buf_list, + info->rx_buf_list_ex, + info->rx_buf_count) < 0 || + alloc_frame_bufs(info, + info->tx_buf_list, + info->tx_buf_list_ex, + info->tx_buf_count) < 0 || + alloc_tmp_rx_buf(info) < 0 ) { + printk("%s(%d):%s Can't allocate DMA buffer memory\n", + __FILE__,__LINE__, info->device_name); + return -ENOMEM; + } + + rx_reset_buffers( info ); + + return 0; +} + +/* Allocate DMA buffers for the transmit and receive descriptor lists. + */ +static int alloc_buf_list(SLMP_INFO *info) +{ + unsigned int i; + + /* build list in adapter shared memory */ + info->buffer_list = info->memory_base + info->port_array[0]->last_mem_alloc; + info->buffer_list_phys = info->port_array[0]->last_mem_alloc; + info->port_array[0]->last_mem_alloc += BUFFERLISTSIZE; + + memset(info->buffer_list, 0, BUFFERLISTSIZE); + + /* Save virtual address pointers to the receive and */ + /* transmit buffer lists. (Receive 1st). These pointers will */ + /* be used by the processor to access the lists. */ + info->rx_buf_list = (SCADESC *)info->buffer_list; + + info->tx_buf_list = (SCADESC *)info->buffer_list; + info->tx_buf_list += info->rx_buf_count; + + /* Build links for circular buffer entry lists (tx and rx) + * + * Note: links are physical addresses read by the SCA device + * to determine the next buffer entry to use. + */ + + for ( i = 0; i < info->rx_buf_count; i++ ) { + /* calculate and store physical address of this buffer entry */ + info->rx_buf_list_ex[i].phys_entry = + info->buffer_list_phys + (i * SCABUFSIZE); + + /* calculate and store physical address of */ + /* next entry in cirular list of entries */ + info->rx_buf_list[i].next = info->buffer_list_phys; + if ( i < info->rx_buf_count - 1 ) + info->rx_buf_list[i].next += (i + 1) * sizeof(SCADESC); + + info->rx_buf_list[i].length = SCABUFSIZE; + } + + for ( i = 0; i < info->tx_buf_count; i++ ) { + /* calculate and store physical address of this buffer entry */ + info->tx_buf_list_ex[i].phys_entry = info->buffer_list_phys + + ((info->rx_buf_count + i) * sizeof(SCADESC)); + + /* calculate and store physical address of */ + /* next entry in cirular list of entries */ + + info->tx_buf_list[i].next = info->buffer_list_phys + + info->rx_buf_count * sizeof(SCADESC); + + if ( i < info->tx_buf_count - 1 ) + info->tx_buf_list[i].next += (i + 1) * sizeof(SCADESC); + } + + return 0; +} + +/* Allocate the frame DMA buffers used by the specified buffer list. + */ +static int alloc_frame_bufs(SLMP_INFO *info, SCADESC *buf_list,SCADESC_EX *buf_list_ex,int count) +{ + int i; + unsigned long phys_addr; + + for ( i = 0; i < count; i++ ) { + buf_list_ex[i].virt_addr = info->memory_base + info->port_array[0]->last_mem_alloc; + phys_addr = info->port_array[0]->last_mem_alloc; + info->port_array[0]->last_mem_alloc += SCABUFSIZE; + + buf_list[i].buf_ptr = (unsigned short)phys_addr; + buf_list[i].buf_base = (unsigned char)(phys_addr >> 16); + } + + return 0; +} + +static void free_dma_bufs(SLMP_INFO *info) +{ + info->buffer_list = NULL; + info->rx_buf_list = NULL; + info->tx_buf_list = NULL; +} + +/* allocate buffer large enough to hold max_frame_size. + * This buffer is used to pass an assembled frame to the line discipline. + */ +static int alloc_tmp_rx_buf(SLMP_INFO *info) +{ + info->tmp_rx_buf = kmalloc(info->max_frame_size, GFP_KERNEL); + if (info->tmp_rx_buf == NULL) + return -ENOMEM; + /* unused flag buffer to satisfy receive_buf calling interface */ + info->flag_buf = kzalloc(info->max_frame_size, GFP_KERNEL); + if (!info->flag_buf) { + kfree(info->tmp_rx_buf); + info->tmp_rx_buf = NULL; + return -ENOMEM; + } + return 0; +} + +static void free_tmp_rx_buf(SLMP_INFO *info) +{ + kfree(info->tmp_rx_buf); + info->tmp_rx_buf = NULL; + kfree(info->flag_buf); + info->flag_buf = NULL; +} + +static int claim_resources(SLMP_INFO *info) +{ + if (request_mem_region(info->phys_memory_base,SCA_MEM_SIZE,"synclinkmp") == NULL) { + printk( "%s(%d):%s mem addr conflict, Addr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_memory_base); + info->init_error = DiagStatus_AddressConflict; + goto errout; + } + else + info->shared_mem_requested = true; + + if (request_mem_region(info->phys_lcr_base + info->lcr_offset,128,"synclinkmp") == NULL) { + printk( "%s(%d):%s lcr mem addr conflict, Addr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_lcr_base); + info->init_error = DiagStatus_AddressConflict; + goto errout; + } + else + info->lcr_mem_requested = true; + + if (request_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE,"synclinkmp") == NULL) { + printk( "%s(%d):%s sca mem addr conflict, Addr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_sca_base); + info->init_error = DiagStatus_AddressConflict; + goto errout; + } + else + info->sca_base_requested = true; + + if (request_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE,"synclinkmp") == NULL) { + printk( "%s(%d):%s stat/ctrl mem addr conflict, Addr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_statctrl_base); + info->init_error = DiagStatus_AddressConflict; + goto errout; + } + else + info->sca_statctrl_requested = true; + + info->memory_base = ioremap(info->phys_memory_base, + SCA_MEM_SIZE); + if (!info->memory_base) { + printk( "%s(%d):%s Can't map shared memory, MemAddr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_memory_base ); + info->init_error = DiagStatus_CantAssignPciResources; + goto errout; + } + + info->lcr_base = ioremap(info->phys_lcr_base, PAGE_SIZE); + if (!info->lcr_base) { + printk( "%s(%d):%s Can't map LCR memory, MemAddr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_lcr_base ); + info->init_error = DiagStatus_CantAssignPciResources; + goto errout; + } + info->lcr_base += info->lcr_offset; + + info->sca_base = ioremap(info->phys_sca_base, PAGE_SIZE); + if (!info->sca_base) { + printk( "%s(%d):%s Can't map SCA memory, MemAddr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_sca_base ); + info->init_error = DiagStatus_CantAssignPciResources; + goto errout; + } + info->sca_base += info->sca_offset; + + info->statctrl_base = ioremap(info->phys_statctrl_base, + PAGE_SIZE); + if (!info->statctrl_base) { + printk( "%s(%d):%s Can't map SCA Status/Control memory, MemAddr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_statctrl_base ); + info->init_error = DiagStatus_CantAssignPciResources; + goto errout; + } + info->statctrl_base += info->statctrl_offset; + + if ( !memory_test(info) ) { + printk( "%s(%d):Shared Memory Test failed for device %s MemAddr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_memory_base ); + info->init_error = DiagStatus_MemoryError; + goto errout; + } + + return 0; + +errout: + release_resources( info ); + return -ENODEV; +} + +static void release_resources(SLMP_INFO *info) +{ + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):%s release_resources() entry\n", + __FILE__,__LINE__,info->device_name ); + + if ( info->irq_requested ) { + free_irq(info->irq_level, info); + info->irq_requested = false; + } + + if ( info->shared_mem_requested ) { + release_mem_region(info->phys_memory_base,SCA_MEM_SIZE); + info->shared_mem_requested = false; + } + if ( info->lcr_mem_requested ) { + release_mem_region(info->phys_lcr_base + info->lcr_offset,128); + info->lcr_mem_requested = false; + } + if ( info->sca_base_requested ) { + release_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE); + info->sca_base_requested = false; + } + if ( info->sca_statctrl_requested ) { + release_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE); + info->sca_statctrl_requested = false; + } + + if (info->memory_base){ + iounmap(info->memory_base); + info->memory_base = NULL; + } + + if (info->sca_base) { + iounmap(info->sca_base - info->sca_offset); + info->sca_base=NULL; + } + + if (info->statctrl_base) { + iounmap(info->statctrl_base - info->statctrl_offset); + info->statctrl_base=NULL; + } + + if (info->lcr_base){ + iounmap(info->lcr_base - info->lcr_offset); + info->lcr_base = NULL; + } + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):%s release_resources() exit\n", + __FILE__,__LINE__,info->device_name ); +} + +/* Add the specified device instance data structure to the + * global linked list of devices and increment the device count. + */ +static int add_device(SLMP_INFO *info) +{ + info->next_device = NULL; + info->line = synclinkmp_device_count; + sprintf(info->device_name,"ttySLM%dp%d",info->adapter_num,info->port_num); + + if (info->line < MAX_DEVICES) { + if (maxframe[info->line]) + info->max_frame_size = maxframe[info->line]; + } + + synclinkmp_device_count++; + + if ( !synclinkmp_device_list ) + synclinkmp_device_list = info; + else { + SLMP_INFO *current_dev = synclinkmp_device_list; + while( current_dev->next_device ) + current_dev = current_dev->next_device; + current_dev->next_device = info; + } + + if ( info->max_frame_size < 4096 ) + info->max_frame_size = 4096; + else if ( info->max_frame_size > 65535 ) + info->max_frame_size = 65535; + + printk( "SyncLink MultiPort %s: " + "Mem=(%08x %08X %08x %08X) IRQ=%d MaxFrameSize=%u\n", + info->device_name, + info->phys_sca_base, + info->phys_memory_base, + info->phys_statctrl_base, + info->phys_lcr_base, + info->irq_level, + info->max_frame_size ); + +#if SYNCLINK_GENERIC_HDLC + return hdlcdev_init(info); +#else + return 0; +#endif +} + +static const struct tty_port_operations port_ops = { + .carrier_raised = carrier_raised, + .dtr_rts = dtr_rts, +}; + +/* Allocate and initialize a device instance structure + * + * Return Value: pointer to SLMP_INFO if success, otherwise NULL + */ +static SLMP_INFO *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev) +{ + SLMP_INFO *info; + + info = kzalloc(sizeof(SLMP_INFO), + GFP_KERNEL); + + if (!info) { + printk("%s(%d) Error can't allocate device instance data for adapter %d, port %d\n", + __FILE__,__LINE__, adapter_num, port_num); + } else { + tty_port_init(&info->port); + info->port.ops = &port_ops; + info->magic = MGSL_MAGIC; + INIT_WORK(&info->task, bh_handler); + info->max_frame_size = 4096; + info->port.close_delay = 5*HZ/10; + info->port.closing_wait = 30*HZ; + init_waitqueue_head(&info->status_event_wait_q); + init_waitqueue_head(&info->event_wait_q); + spin_lock_init(&info->netlock); + memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS)); + info->idle_mode = HDLC_TXIDLE_FLAGS; + info->adapter_num = adapter_num; + info->port_num = port_num; + + /* Copy configuration info to device instance data */ + info->irq_level = pdev->irq; + info->phys_lcr_base = pci_resource_start(pdev,0); + info->phys_sca_base = pci_resource_start(pdev,2); + info->phys_memory_base = pci_resource_start(pdev,3); + info->phys_statctrl_base = pci_resource_start(pdev,4); + + /* Because veremap only works on page boundaries we must map + * a larger area than is actually implemented for the LCR + * memory range. We map a full page starting at the page boundary. + */ + info->lcr_offset = info->phys_lcr_base & (PAGE_SIZE-1); + info->phys_lcr_base &= ~(PAGE_SIZE-1); + + info->sca_offset = info->phys_sca_base & (PAGE_SIZE-1); + info->phys_sca_base &= ~(PAGE_SIZE-1); + + info->statctrl_offset = info->phys_statctrl_base & (PAGE_SIZE-1); + info->phys_statctrl_base &= ~(PAGE_SIZE-1); + + info->bus_type = MGSL_BUS_TYPE_PCI; + info->irq_flags = IRQF_SHARED; + + timer_setup(&info->tx_timer, tx_timeout, 0); + timer_setup(&info->status_timer, status_timeout, 0); + + /* Store the PCI9050 misc control register value because a flaw + * in the PCI9050 prevents LCR registers from being read if + * BIOS assigns an LCR base address with bit 7 set. + * + * Only the misc control register is accessed for which only + * write access is needed, so set an initial value and change + * bits to the device instance data as we write the value + * to the actual misc control register. + */ + info->misc_ctrl_value = 0x087e4546; + + /* initial port state is unknown - if startup errors + * occur, init_error will be set to indicate the + * problem. Once the port is fully initialized, + * this value will be set to 0 to indicate the + * port is available. + */ + info->init_error = -1; + } + + return info; +} + +static int device_init(int adapter_num, struct pci_dev *pdev) +{ + SLMP_INFO *port_array[SCA_MAX_PORTS]; + int port, rc; + + /* allocate device instances for up to SCA_MAX_PORTS devices */ + for ( port = 0; port < SCA_MAX_PORTS; ++port ) { + port_array[port] = alloc_dev(adapter_num,port,pdev); + if( port_array[port] == NULL ) { + for (--port; port >= 0; --port) { + tty_port_destroy(&port_array[port]->port); + kfree(port_array[port]); + } + return -ENOMEM; + } + } + + /* give copy of port_array to all ports and add to device list */ + for ( port = 0; port < SCA_MAX_PORTS; ++port ) { + memcpy(port_array[port]->port_array,port_array,sizeof(port_array)); + rc = add_device( port_array[port] ); + if (rc) + goto err_add; + spin_lock_init(&port_array[port]->lock); + } + + /* Allocate and claim adapter resources */ + if ( !claim_resources(port_array[0]) ) { + + alloc_dma_bufs(port_array[0]); + + /* copy resource information from first port to others */ + for ( port = 1; port < SCA_MAX_PORTS; ++port ) { + port_array[port]->lock = port_array[0]->lock; + port_array[port]->irq_level = port_array[0]->irq_level; + port_array[port]->memory_base = port_array[0]->memory_base; + port_array[port]->sca_base = port_array[0]->sca_base; + port_array[port]->statctrl_base = port_array[0]->statctrl_base; + port_array[port]->lcr_base = port_array[0]->lcr_base; + alloc_dma_bufs(port_array[port]); + } + + rc = request_irq(port_array[0]->irq_level, + synclinkmp_interrupt, + port_array[0]->irq_flags, + port_array[0]->device_name, + port_array[0]); + if ( rc ) { + printk( "%s(%d):%s Can't request interrupt, IRQ=%d\n", + __FILE__,__LINE__, + port_array[0]->device_name, + port_array[0]->irq_level ); + goto err_irq; + } + port_array[0]->irq_requested = true; + adapter_test(port_array[0]); + } + return 0; +err_irq: + release_resources( port_array[0] ); +err_add: + for ( port = 0; port < SCA_MAX_PORTS; ++port ) { + tty_port_destroy(&port_array[port]->port); + kfree(port_array[port]); + } + return rc; +} + +static const struct tty_operations ops = { + .install = install, + .open = open, + .close = close, + .write = write, + .put_char = put_char, + .flush_chars = flush_chars, + .write_room = write_room, + .chars_in_buffer = chars_in_buffer, + .flush_buffer = flush_buffer, + .ioctl = ioctl, + .throttle = throttle, + .unthrottle = unthrottle, + .send_xchar = send_xchar, + .break_ctl = set_break, + .wait_until_sent = wait_until_sent, + .set_termios = set_termios, + .stop = tx_hold, + .start = tx_release, + .hangup = hangup, + .tiocmget = tiocmget, + .tiocmset = tiocmset, + .get_icount = get_icount, + .proc_show = synclinkmp_proc_show, +}; + + +static void synclinkmp_cleanup(void) +{ + int rc; + SLMP_INFO *info; + SLMP_INFO *tmp; + + printk("Unloading %s %s\n", driver_name, driver_version); + + if (serial_driver) { + rc = tty_unregister_driver(serial_driver); + if (rc) + printk("%s(%d) failed to unregister tty driver err=%d\n", + __FILE__,__LINE__,rc); + put_tty_driver(serial_driver); + } + + /* reset devices */ + info = synclinkmp_device_list; + while(info) { + reset_port(info); + info = info->next_device; + } + + /* release devices */ + info = synclinkmp_device_list; + while(info) { +#if SYNCLINK_GENERIC_HDLC + hdlcdev_exit(info); +#endif + free_dma_bufs(info); + free_tmp_rx_buf(info); + if ( info->port_num == 0 ) { + if (info->sca_base) + write_reg(info, LPR, 1); /* set low power mode */ + release_resources(info); + } + tmp = info; + info = info->next_device; + tty_port_destroy(&tmp->port); + kfree(tmp); + } + + pci_unregister_driver(&synclinkmp_pci_driver); +} + +/* Driver initialization entry point. + */ + +static int __init synclinkmp_init(void) +{ + int rc; + + if (break_on_load) { + synclinkmp_get_text_ptr(); + BREAKPOINT(); + } + + printk("%s %s\n", driver_name, driver_version); + + if ((rc = pci_register_driver(&synclinkmp_pci_driver)) < 0) { + printk("%s:failed to register PCI driver, error=%d\n",__FILE__,rc); + return rc; + } + + serial_driver = alloc_tty_driver(128); + if (!serial_driver) { + rc = -ENOMEM; + goto error; + } + + /* Initialize the tty_driver structure */ + + serial_driver->driver_name = "synclinkmp"; + serial_driver->name = "ttySLM"; + serial_driver->major = ttymajor; + serial_driver->minor_start = 64; + serial_driver->type = TTY_DRIVER_TYPE_SERIAL; + serial_driver->subtype = SERIAL_TYPE_NORMAL; + serial_driver->init_termios = tty_std_termios; + serial_driver->init_termios.c_cflag = + B9600 | CS8 | CREAD | HUPCL | CLOCAL; + serial_driver->init_termios.c_ispeed = 9600; + serial_driver->init_termios.c_ospeed = 9600; + serial_driver->flags = TTY_DRIVER_REAL_RAW; + tty_set_operations(serial_driver, &ops); + if ((rc = tty_register_driver(serial_driver)) < 0) { + printk("%s(%d):Couldn't register serial driver\n", + __FILE__,__LINE__); + put_tty_driver(serial_driver); + serial_driver = NULL; + goto error; + } + + printk("%s %s, tty major#%d\n", + driver_name, driver_version, + serial_driver->major); + + return 0; + +error: + synclinkmp_cleanup(); + return rc; +} + +static void __exit synclinkmp_exit(void) +{ + synclinkmp_cleanup(); +} + +module_init(synclinkmp_init); +module_exit(synclinkmp_exit); + +/* Set the port for internal loopback mode. + * The TxCLK and RxCLK signals are generated from the BRG and + * the TxD is looped back to the RxD internally. + */ +static void enable_loopback(SLMP_INFO *info, int enable) +{ + if (enable) { + /* MD2 (Mode Register 2) + * 01..00 CNCT<1..0> Channel Connection 11=Local Loopback + */ + write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) | (BIT1 + BIT0))); + + /* degate external TxC clock source */ + info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2)); + write_control_reg(info); + + /* RXS/TXS (Rx/Tx clock source) + * 07 Reserved, must be 0 + * 06..04 Clock Source, 100=BRG + * 03..00 Clock Divisor, 0000=1 + */ + write_reg(info, RXS, 0x40); + write_reg(info, TXS, 0x40); + + } else { + /* MD2 (Mode Register 2) + * 01..00 CNCT<1..0> Channel connection, 0=normal + */ + write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) & ~(BIT1 + BIT0))); + + /* RXS/TXS (Rx/Tx clock source) + * 07 Reserved, must be 0 + * 06..04 Clock Source, 000=RxC/TxC Pin + * 03..00 Clock Divisor, 0000=1 + */ + write_reg(info, RXS, 0x00); + write_reg(info, TXS, 0x00); + } + + /* set LinkSpeed if available, otherwise default to 2Mbps */ + if (info->params.clock_speed) + set_rate(info, info->params.clock_speed); + else + set_rate(info, 3686400); +} + +/* Set the baud rate register to the desired speed + * + * data_rate data rate of clock in bits per second + * A data rate of 0 disables the AUX clock. + */ +static void set_rate( SLMP_INFO *info, u32 data_rate ) +{ + u32 TMCValue; + unsigned char BRValue; + u32 Divisor=0; + + /* fBRG = fCLK/(TMC * 2^BR) + */ + if (data_rate != 0) { + Divisor = 14745600/data_rate; + if (!Divisor) + Divisor = 1; + + TMCValue = Divisor; + + BRValue = 0; + if (TMCValue != 1 && TMCValue != 2) { + /* BRValue of 0 provides 50/50 duty cycle *only* when + * TMCValue is 1 or 2. BRValue of 1 to 9 always provides + * 50/50 duty cycle. + */ + BRValue = 1; + TMCValue >>= 1; + } + + /* while TMCValue is too big for TMC register, divide + * by 2 and increment BR exponent. + */ + for(; TMCValue > 256 && BRValue < 10; BRValue++) + TMCValue >>= 1; + + write_reg(info, TXS, + (unsigned char)((read_reg(info, TXS) & 0xf0) | BRValue)); + write_reg(info, RXS, + (unsigned char)((read_reg(info, RXS) & 0xf0) | BRValue)); + write_reg(info, TMC, (unsigned char)TMCValue); + } + else { + write_reg(info, TXS,0); + write_reg(info, RXS,0); + write_reg(info, TMC, 0); + } +} + +/* Disable receiver + */ +static void rx_stop(SLMP_INFO *info) +{ + if (debug_level >= DEBUG_LEVEL_ISR) + printk("%s(%d):%s rx_stop()\n", + __FILE__,__LINE__, info->device_name ); + + write_reg(info, CMD, RXRESET); + + info->ie0_value &= ~RXRDYE; + write_reg(info, IE0, info->ie0_value); /* disable Rx data interrupts */ + + write_reg(info, RXDMA + DSR, 0); /* disable Rx DMA */ + write_reg(info, RXDMA + DCMD, SWABORT); /* reset/init Rx DMA */ + write_reg(info, RXDMA + DIR, 0); /* disable Rx DMA interrupts */ + + info->rx_enabled = false; + info->rx_overflow = false; +} + +/* enable the receiver + */ +static void rx_start(SLMP_INFO *info) +{ + int i; + + if (debug_level >= DEBUG_LEVEL_ISR) + printk("%s(%d):%s rx_start()\n", + __FILE__,__LINE__, info->device_name ); + + write_reg(info, CMD, RXRESET); + + if ( info->params.mode == MGSL_MODE_HDLC ) { + /* HDLC, disabe IRQ on rxdata */ + info->ie0_value &= ~RXRDYE; + write_reg(info, IE0, info->ie0_value); + + /* Reset all Rx DMA buffers and program rx dma */ + write_reg(info, RXDMA + DSR, 0); /* disable Rx DMA */ + write_reg(info, RXDMA + DCMD, SWABORT); /* reset/init Rx DMA */ + + for (i = 0; i < info->rx_buf_count; i++) { + info->rx_buf_list[i].status = 0xff; + + // throttle to 4 shared memory writes at a time to prevent + // hogging local bus (keep latency time for DMA requests low). + if (!(i % 4)) + read_status_reg(info); + } + info->current_rx_buf = 0; + + /* set current/1st descriptor address */ + write_reg16(info, RXDMA + CDA, + info->rx_buf_list_ex[0].phys_entry); + + /* set new last rx descriptor address */ + write_reg16(info, RXDMA + EDA, + info->rx_buf_list_ex[info->rx_buf_count - 1].phys_entry); + + /* set buffer length (shared by all rx dma data buffers) */ + write_reg16(info, RXDMA + BFL, SCABUFSIZE); + + write_reg(info, RXDMA + DIR, 0x60); /* enable Rx DMA interrupts (EOM/BOF) */ + write_reg(info, RXDMA + DSR, 0xf2); /* clear Rx DMA IRQs, enable Rx DMA */ + } else { + /* async, enable IRQ on rxdata */ + info->ie0_value |= RXRDYE; + write_reg(info, IE0, info->ie0_value); + } + + write_reg(info, CMD, RXENABLE); + + info->rx_overflow = false; + info->rx_enabled = true; +} + +/* Enable the transmitter and send a transmit frame if + * one is loaded in the DMA buffers. + */ +static void tx_start(SLMP_INFO *info) +{ + if (debug_level >= DEBUG_LEVEL_ISR) + printk("%s(%d):%s tx_start() tx_count=%d\n", + __FILE__,__LINE__, info->device_name,info->tx_count ); + + if (!info->tx_enabled ) { + write_reg(info, CMD, TXRESET); + write_reg(info, CMD, TXENABLE); + info->tx_enabled = true; + } + + if ( info->tx_count ) { + + /* If auto RTS enabled and RTS is inactive, then assert */ + /* RTS and set a flag indicating that the driver should */ + /* negate RTS when the transmission completes. */ + + info->drop_rts_on_tx_done = false; + + if (info->params.mode != MGSL_MODE_ASYNC) { + + if ( info->params.flags & HDLC_FLAG_AUTO_RTS ) { + get_signals( info ); + if ( !(info->serial_signals & SerialSignal_RTS) ) { + info->serial_signals |= SerialSignal_RTS; + set_signals( info ); + info->drop_rts_on_tx_done = true; + } + } + + write_reg16(info, TRC0, + (unsigned short)(((tx_negate_fifo_level-1)<<8) + tx_active_fifo_level)); + + write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */ + write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */ + + /* set TX CDA (current descriptor address) */ + write_reg16(info, TXDMA + CDA, + info->tx_buf_list_ex[0].phys_entry); + + /* set TX EDA (last descriptor address) */ + write_reg16(info, TXDMA + EDA, + info->tx_buf_list_ex[info->last_tx_buf].phys_entry); + + /* enable underrun IRQ */ + info->ie1_value &= ~IDLE; + info->ie1_value |= UDRN; + write_reg(info, IE1, info->ie1_value); + write_reg(info, SR1, (unsigned char)(IDLE + UDRN)); + + write_reg(info, TXDMA + DIR, 0x40); /* enable Tx DMA interrupts (EOM) */ + write_reg(info, TXDMA + DSR, 0xf2); /* clear Tx DMA IRQs, enable Tx DMA */ + + mod_timer(&info->tx_timer, jiffies + + msecs_to_jiffies(5000)); + } + else { + tx_load_fifo(info); + /* async, enable IRQ on txdata */ + info->ie0_value |= TXRDYE; + write_reg(info, IE0, info->ie0_value); + } + + info->tx_active = true; + } +} + +/* stop the transmitter and DMA + */ +static void tx_stop( SLMP_INFO *info ) +{ + if (debug_level >= DEBUG_LEVEL_ISR) + printk("%s(%d):%s tx_stop()\n", + __FILE__,__LINE__, info->device_name ); + + del_timer(&info->tx_timer); + + write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */ + write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */ + + write_reg(info, CMD, TXRESET); + + info->ie1_value &= ~(UDRN + IDLE); + write_reg(info, IE1, info->ie1_value); /* disable tx status interrupts */ + write_reg(info, SR1, (unsigned char)(IDLE + UDRN)); /* clear pending */ + + info->ie0_value &= ~TXRDYE; + write_reg(info, IE0, info->ie0_value); /* disable tx data interrupts */ + + info->tx_enabled = false; + info->tx_active = false; +} + +/* Fill the transmit FIFO until the FIFO is full or + * there is no more data to load. + */ +static void tx_load_fifo(SLMP_INFO *info) +{ + u8 TwoBytes[2]; + + /* do nothing is now tx data available and no XON/XOFF pending */ + + if ( !info->tx_count && !info->x_char ) + return; + + /* load the Transmit FIFO until FIFOs full or all data sent */ + + while( info->tx_count && (read_reg(info,SR0) & BIT1) ) { + + /* there is more space in the transmit FIFO and */ + /* there is more data in transmit buffer */ + + if ( (info->tx_count > 1) && !info->x_char ) { + /* write 16-bits */ + TwoBytes[0] = info->tx_buf[info->tx_get++]; + if (info->tx_get >= info->max_frame_size) + info->tx_get -= info->max_frame_size; + TwoBytes[1] = info->tx_buf[info->tx_get++]; + if (info->tx_get >= info->max_frame_size) + info->tx_get -= info->max_frame_size; + + write_reg16(info, TRB, *((u16 *)TwoBytes)); + + info->tx_count -= 2; + info->icount.tx += 2; + } else { + /* only 1 byte left to transmit or 1 FIFO slot left */ + + if (info->x_char) { + /* transmit pending high priority char */ + write_reg(info, TRB, info->x_char); + info->x_char = 0; + } else { + write_reg(info, TRB, info->tx_buf[info->tx_get++]); + if (info->tx_get >= info->max_frame_size) + info->tx_get -= info->max_frame_size; + info->tx_count--; + } + info->icount.tx++; + } + } +} + +/* Reset a port to a known state + */ +static void reset_port(SLMP_INFO *info) +{ + if (info->sca_base) { + + tx_stop(info); + rx_stop(info); + + info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR); + set_signals(info); + + /* disable all port interrupts */ + info->ie0_value = 0; + info->ie1_value = 0; + info->ie2_value = 0; + write_reg(info, IE0, info->ie0_value); + write_reg(info, IE1, info->ie1_value); + write_reg(info, IE2, info->ie2_value); + + write_reg(info, CMD, CHRESET); + } +} + +/* Reset all the ports to a known state. + */ +static void reset_adapter(SLMP_INFO *info) +{ + int i; + + for ( i=0; i < SCA_MAX_PORTS; ++i) { + if (info->port_array[i]) + reset_port(info->port_array[i]); + } +} + +/* Program port for asynchronous communications. + */ +static void async_mode(SLMP_INFO *info) +{ + + unsigned char RegValue; + + tx_stop(info); + rx_stop(info); + + /* MD0, Mode Register 0 + * + * 07..05 PRCTL<2..0>, Protocol Mode, 000=async + * 04 AUTO, Auto-enable (RTS/CTS/DCD) + * 03 Reserved, must be 0 + * 02 CRCCC, CRC Calculation, 0=disabled + * 01..00 STOP<1..0> Stop bits (00=1,10=2) + * + * 0000 0000 + */ + RegValue = 0x00; + if (info->params.stop_bits != 1) + RegValue |= BIT1; + write_reg(info, MD0, RegValue); + + /* MD1, Mode Register 1 + * + * 07..06 BRATE<1..0>, bit rate, 00=1/1 01=1/16 10=1/32 11=1/64 + * 05..04 TXCHR<1..0>, tx char size, 00=8 bits,01=7,10=6,11=5 + * 03..02 RXCHR<1..0>, rx char size + * 01..00 PMPM<1..0>, Parity mode, 00=none 10=even 11=odd + * + * 0100 0000 + */ + RegValue = 0x40; + switch (info->params.data_bits) { + case 7: RegValue |= BIT4 + BIT2; break; + case 6: RegValue |= BIT5 + BIT3; break; + case 5: RegValue |= BIT5 + BIT4 + BIT3 + BIT2; break; + } + if (info->params.parity != ASYNC_PARITY_NONE) { + RegValue |= BIT1; + if (info->params.parity == ASYNC_PARITY_ODD) + RegValue |= BIT0; + } + write_reg(info, MD1, RegValue); + + /* MD2, Mode Register 2 + * + * 07..02 Reserved, must be 0 + * 01..00 CNCT<1..0> Channel connection, 00=normal 11=local loopback + * + * 0000 0000 + */ + RegValue = 0x00; + if (info->params.loopback) + RegValue |= (BIT1 + BIT0); + write_reg(info, MD2, RegValue); + + /* RXS, Receive clock source + * + * 07 Reserved, must be 0 + * 06..04 RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL + * 03..00 RXBR<3..0>, rate divisor, 0000=1 + */ + RegValue=BIT6; + write_reg(info, RXS, RegValue); + + /* TXS, Transmit clock source + * + * 07 Reserved, must be 0 + * 06..04 RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock + * 03..00 RXBR<3..0>, rate divisor, 0000=1 + */ + RegValue=BIT6; + write_reg(info, TXS, RegValue); + + /* Control Register + * + * 6,4,2,0 CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out + */ + info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2)); + write_control_reg(info); + + tx_set_idle(info); + + /* RRC Receive Ready Control 0 + * + * 07..05 Reserved, must be 0 + * 04..00 RRC<4..0> Rx FIFO trigger active 0x00 = 1 byte + */ + write_reg(info, RRC, 0x00); + + /* TRC0 Transmit Ready Control 0 + * + * 07..05 Reserved, must be 0 + * 04..00 TRC<4..0> Tx FIFO trigger active 0x10 = 16 bytes + */ + write_reg(info, TRC0, 0x10); + + /* TRC1 Transmit Ready Control 1 + * + * 07..05 Reserved, must be 0 + * 04..00 TRC<4..0> Tx FIFO trigger inactive 0x1e = 31 bytes (full-1) + */ + write_reg(info, TRC1, 0x1e); + + /* CTL, MSCI control register + * + * 07..06 Reserved, set to 0 + * 05 UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC) + * 04 IDLC, idle control, 0=mark 1=idle register + * 03 BRK, break, 0=off 1 =on (async) + * 02 SYNCLD, sync char load enable (BSC) 1=enabled + * 01 GOP, go active on poll (LOOP mode) 1=enabled + * 00 RTS, RTS output control, 0=active 1=inactive + * + * 0001 0001 + */ + RegValue = 0x10; + if (!(info->serial_signals & SerialSignal_RTS)) + RegValue |= 0x01; + write_reg(info, CTL, RegValue); + + /* enable status interrupts */ + info->ie0_value |= TXINTE + RXINTE; + write_reg(info, IE0, info->ie0_value); + + /* enable break detect interrupt */ + info->ie1_value = BRKD; + write_reg(info, IE1, info->ie1_value); + + /* enable rx overrun interrupt */ + info->ie2_value = OVRN; + write_reg(info, IE2, info->ie2_value); + + set_rate( info, info->params.data_rate * 16 ); +} + +/* Program the SCA for HDLC communications. + */ +static void hdlc_mode(SLMP_INFO *info) +{ + unsigned char RegValue; + u32 DpllDivisor; + + // Can't use DPLL because SCA outputs recovered clock on RxC when + // DPLL mode selected. This causes output contention with RxC receiver. + // Use of DPLL would require external hardware to disable RxC receiver + // when DPLL mode selected. + info->params.flags &= ~(HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL); + + /* disable DMA interrupts */ + write_reg(info, TXDMA + DIR, 0); + write_reg(info, RXDMA + DIR, 0); + + /* MD0, Mode Register 0 + * + * 07..05 PRCTL<2..0>, Protocol Mode, 100=HDLC + * 04 AUTO, Auto-enable (RTS/CTS/DCD) + * 03 Reserved, must be 0 + * 02 CRCCC, CRC Calculation, 1=enabled + * 01 CRC1, CRC selection, 0=CRC-16,1=CRC-CCITT-16 + * 00 CRC0, CRC initial value, 1 = all 1s + * + * 1000 0001 + */ + RegValue = 0x81; + if (info->params.flags & HDLC_FLAG_AUTO_CTS) + RegValue |= BIT4; + if (info->params.flags & HDLC_FLAG_AUTO_DCD) + RegValue |= BIT4; + if (info->params.crc_type == HDLC_CRC_16_CCITT) + RegValue |= BIT2 + BIT1; + write_reg(info, MD0, RegValue); + + /* MD1, Mode Register 1 + * + * 07..06 ADDRS<1..0>, Address detect, 00=no addr check + * 05..04 TXCHR<1..0>, tx char size, 00=8 bits + * 03..02 RXCHR<1..0>, rx char size, 00=8 bits + * 01..00 PMPM<1..0>, Parity mode, 00=no parity + * + * 0000 0000 + */ + RegValue = 0x00; + write_reg(info, MD1, RegValue); + + /* MD2, Mode Register 2 + * + * 07 NRZFM, 0=NRZ, 1=FM + * 06..05 CODE<1..0> Encoding, 00=NRZ + * 04..03 DRATE<1..0> DPLL Divisor, 00=8 + * 02 Reserved, must be 0 + * 01..00 CNCT<1..0> Channel connection, 0=normal + * + * 0000 0000 + */ + RegValue = 0x00; + switch(info->params.encoding) { + case HDLC_ENCODING_NRZI: RegValue |= BIT5; break; + case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT7 + BIT5; break; /* aka FM1 */ + case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT7 + BIT6; break; /* aka FM0 */ + case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT7; break; /* aka Manchester */ +#if 0 + case HDLC_ENCODING_NRZB: /* not supported */ + case HDLC_ENCODING_NRZI_MARK: /* not supported */ + case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: /* not supported */ +#endif + } + if ( info->params.flags & HDLC_FLAG_DPLL_DIV16 ) { + DpllDivisor = 16; + RegValue |= BIT3; + } else if ( info->params.flags & HDLC_FLAG_DPLL_DIV8 ) { + DpllDivisor = 8; + } else { + DpllDivisor = 32; + RegValue |= BIT4; + } + write_reg(info, MD2, RegValue); + + + /* RXS, Receive clock source + * + * 07 Reserved, must be 0 + * 06..04 RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL + * 03..00 RXBR<3..0>, rate divisor, 0000=1 + */ + RegValue=0; + if (info->params.flags & HDLC_FLAG_RXC_BRG) + RegValue |= BIT6; + if (info->params.flags & HDLC_FLAG_RXC_DPLL) + RegValue |= BIT6 + BIT5; + write_reg(info, RXS, RegValue); + + /* TXS, Transmit clock source + * + * 07 Reserved, must be 0 + * 06..04 RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock + * 03..00 RXBR<3..0>, rate divisor, 0000=1 + */ + RegValue=0; + if (info->params.flags & HDLC_FLAG_TXC_BRG) + RegValue |= BIT6; + if (info->params.flags & HDLC_FLAG_TXC_DPLL) + RegValue |= BIT6 + BIT5; + write_reg(info, TXS, RegValue); + + if (info->params.flags & HDLC_FLAG_RXC_DPLL) + set_rate(info, info->params.clock_speed * DpllDivisor); + else + set_rate(info, info->params.clock_speed); + + /* GPDATA (General Purpose I/O Data Register) + * + * 6,4,2,0 CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out + */ + if (info->params.flags & HDLC_FLAG_TXC_BRG) + info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2)); + else + info->port_array[0]->ctrlreg_value &= ~(BIT0 << (info->port_num * 2)); + write_control_reg(info); + + /* RRC Receive Ready Control 0 + * + * 07..05 Reserved, must be 0 + * 04..00 RRC<4..0> Rx FIFO trigger active + */ + write_reg(info, RRC, rx_active_fifo_level); + + /* TRC0 Transmit Ready Control 0 + * + * 07..05 Reserved, must be 0 + * 04..00 TRC<4..0> Tx FIFO trigger active + */ + write_reg(info, TRC0, tx_active_fifo_level); + + /* TRC1 Transmit Ready Control 1 + * + * 07..05 Reserved, must be 0 + * 04..00 TRC<4..0> Tx FIFO trigger inactive 0x1f = 32 bytes (full) + */ + write_reg(info, TRC1, (unsigned char)(tx_negate_fifo_level - 1)); + + /* DMR, DMA Mode Register + * + * 07..05 Reserved, must be 0 + * 04 TMOD, Transfer Mode: 1=chained-block + * 03 Reserved, must be 0 + * 02 NF, Number of Frames: 1=multi-frame + * 01 CNTE, Frame End IRQ Counter enable: 0=disabled + * 00 Reserved, must be 0 + * + * 0001 0100 + */ + write_reg(info, TXDMA + DMR, 0x14); + write_reg(info, RXDMA + DMR, 0x14); + + /* Set chain pointer base (upper 8 bits of 24 bit addr) */ + write_reg(info, RXDMA + CPB, + (unsigned char)(info->buffer_list_phys >> 16)); + + /* Set chain pointer base (upper 8 bits of 24 bit addr) */ + write_reg(info, TXDMA + CPB, + (unsigned char)(info->buffer_list_phys >> 16)); + + /* enable status interrupts. other code enables/disables + * the individual sources for these two interrupt classes. + */ + info->ie0_value |= TXINTE + RXINTE; + write_reg(info, IE0, info->ie0_value); + + /* CTL, MSCI control register + * + * 07..06 Reserved, set to 0 + * 05 UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC) + * 04 IDLC, idle control, 0=mark 1=idle register + * 03 BRK, break, 0=off 1 =on (async) + * 02 SYNCLD, sync char load enable (BSC) 1=enabled + * 01 GOP, go active on poll (LOOP mode) 1=enabled + * 00 RTS, RTS output control, 0=active 1=inactive + * + * 0001 0001 + */ + RegValue = 0x10; + if (!(info->serial_signals & SerialSignal_RTS)) + RegValue |= 0x01; + write_reg(info, CTL, RegValue); + + /* preamble not supported ! */ + + tx_set_idle(info); + tx_stop(info); + rx_stop(info); + + set_rate(info, info->params.clock_speed); + + if (info->params.loopback) + enable_loopback(info,1); +} + +/* Set the transmit HDLC idle mode + */ +static void tx_set_idle(SLMP_INFO *info) +{ + unsigned char RegValue = 0xff; + + /* Map API idle mode to SCA register bits */ + switch(info->idle_mode) { + case HDLC_TXIDLE_FLAGS: RegValue = 0x7e; break; + case HDLC_TXIDLE_ALT_ZEROS_ONES: RegValue = 0xaa; break; + case HDLC_TXIDLE_ZEROS: RegValue = 0x00; break; + case HDLC_TXIDLE_ONES: RegValue = 0xff; break; + case HDLC_TXIDLE_ALT_MARK_SPACE: RegValue = 0xaa; break; + case HDLC_TXIDLE_SPACE: RegValue = 0x00; break; + case HDLC_TXIDLE_MARK: RegValue = 0xff; break; + } + + write_reg(info, IDL, RegValue); +} + +/* Query the adapter for the state of the V24 status (input) signals. + */ +static void get_signals(SLMP_INFO *info) +{ + u16 status = read_reg(info, SR3); + u16 gpstatus = read_status_reg(info); + u16 testbit; + + /* clear all serial signals except RTS and DTR */ + info->serial_signals &= SerialSignal_RTS | SerialSignal_DTR; + + /* set serial signal bits to reflect MISR */ + + if (!(status & BIT3)) + info->serial_signals |= SerialSignal_CTS; + + if ( !(status & BIT2)) + info->serial_signals |= SerialSignal_DCD; + + testbit = BIT1 << (info->port_num * 2); // Port 0..3 RI is GPDATA<1,3,5,7> + if (!(gpstatus & testbit)) + info->serial_signals |= SerialSignal_RI; + + testbit = BIT0 << (info->port_num * 2); // Port 0..3 DSR is GPDATA<0,2,4,6> + if (!(gpstatus & testbit)) + info->serial_signals |= SerialSignal_DSR; +} + +/* Set the state of RTS and DTR based on contents of + * serial_signals member of device context. + */ +static void set_signals(SLMP_INFO *info) +{ + unsigned char RegValue; + u16 EnableBit; + + RegValue = read_reg(info, CTL); + if (info->serial_signals & SerialSignal_RTS) + RegValue &= ~BIT0; + else + RegValue |= BIT0; + write_reg(info, CTL, RegValue); + + // Port 0..3 DTR is ctrl reg <1,3,5,7> + EnableBit = BIT1 << (info->port_num*2); + if (info->serial_signals & SerialSignal_DTR) + info->port_array[0]->ctrlreg_value &= ~EnableBit; + else + info->port_array[0]->ctrlreg_value |= EnableBit; + write_control_reg(info); +} + +/*******************/ +/* DMA Buffer Code */ +/*******************/ + +/* Set the count for all receive buffers to SCABUFSIZE + * and set the current buffer to the first buffer. This effectively + * makes all buffers free and discards any data in buffers. + */ +static void rx_reset_buffers(SLMP_INFO *info) +{ + rx_free_frame_buffers(info, 0, info->rx_buf_count - 1); +} + +/* Free the buffers used by a received frame + * + * info pointer to device instance data + * first index of 1st receive buffer of frame + * last index of last receive buffer of frame + */ +static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last) +{ + bool done = false; + + while(!done) { + /* reset current buffer for reuse */ + info->rx_buf_list[first].status = 0xff; + + if (first == last) { + done = true; + /* set new last rx descriptor address */ + write_reg16(info, RXDMA + EDA, info->rx_buf_list_ex[first].phys_entry); + } + + first++; + if (first == info->rx_buf_count) + first = 0; + } + + /* set current buffer to next buffer after last buffer of frame */ + info->current_rx_buf = first; +} + +/* Return a received frame from the receive DMA buffers. + * Only frames received without errors are returned. + * + * Return Value: true if frame returned, otherwise false + */ +static bool rx_get_frame(SLMP_INFO *info) +{ + unsigned int StartIndex, EndIndex; /* index of 1st and last buffers of Rx frame */ + unsigned short status; + unsigned int framesize = 0; + bool ReturnCode = false; + unsigned long flags; + struct tty_struct *tty = info->port.tty; + unsigned char addr_field = 0xff; + SCADESC *desc; + SCADESC_EX *desc_ex; + +CheckAgain: + /* assume no frame returned, set zero length */ + framesize = 0; + addr_field = 0xff; + + /* + * current_rx_buf points to the 1st buffer of the next available + * receive frame. To find the last buffer of the frame look for + * a non-zero status field in the buffer entries. (The status + * field is set by the 16C32 after completing a receive frame. + */ + StartIndex = EndIndex = info->current_rx_buf; + + for ( ;; ) { + desc = &info->rx_buf_list[EndIndex]; + desc_ex = &info->rx_buf_list_ex[EndIndex]; + + if (desc->status == 0xff) + goto Cleanup; /* current desc still in use, no frames available */ + + if (framesize == 0 && info->params.addr_filter != 0xff) + addr_field = desc_ex->virt_addr[0]; + + framesize += desc->length; + + /* Status != 0 means last buffer of frame */ + if (desc->status) + break; + + EndIndex++; + if (EndIndex == info->rx_buf_count) + EndIndex = 0; + + if (EndIndex == info->current_rx_buf) { + /* all buffers have been 'used' but none mark */ + /* the end of a frame. Reset buffers and receiver. */ + if ( info->rx_enabled ){ + spin_lock_irqsave(&info->lock,flags); + rx_start(info); + spin_unlock_irqrestore(&info->lock,flags); + } + goto Cleanup; + } + + } + + /* check status of receive frame */ + + /* frame status is byte stored after frame data + * + * 7 EOM (end of msg), 1 = last buffer of frame + * 6 Short Frame, 1 = short frame + * 5 Abort, 1 = frame aborted + * 4 Residue, 1 = last byte is partial + * 3 Overrun, 1 = overrun occurred during frame reception + * 2 CRC, 1 = CRC error detected + * + */ + status = desc->status; + + /* ignore CRC bit if not using CRC (bit is undefined) */ + /* Note:CRC is not save to data buffer */ + if (info->params.crc_type == HDLC_CRC_NONE) + status &= ~BIT2; + + if (framesize == 0 || + (addr_field != 0xff && addr_field != info->params.addr_filter)) { + /* discard 0 byte frames, this seems to occur sometime + * when remote is idling flags. + */ + rx_free_frame_buffers(info, StartIndex, EndIndex); + goto CheckAgain; + } + + if (framesize < 2) + status |= BIT6; + + if (status & (BIT6+BIT5+BIT3+BIT2)) { + /* received frame has errors, + * update counts and mark frame size as 0 + */ + if (status & BIT6) + info->icount.rxshort++; + else if (status & BIT5) + info->icount.rxabort++; + else if (status & BIT3) + info->icount.rxover++; + else + info->icount.rxcrc++; + + framesize = 0; +#if SYNCLINK_GENERIC_HDLC + { + info->netdev->stats.rx_errors++; + info->netdev->stats.rx_frame_errors++; + } +#endif + } + + if ( debug_level >= DEBUG_LEVEL_BH ) + printk("%s(%d):%s rx_get_frame() status=%04X size=%d\n", + __FILE__,__LINE__,info->device_name,status,framesize); + + if ( debug_level >= DEBUG_LEVEL_DATA ) + trace_block(info,info->rx_buf_list_ex[StartIndex].virt_addr, + min_t(unsigned int, framesize, SCABUFSIZE), 0); + + if (framesize) { + if (framesize > info->max_frame_size) + info->icount.rxlong++; + else { + /* copy dma buffer(s) to contiguous intermediate buffer */ + int copy_count = framesize; + int index = StartIndex; + unsigned char *ptmp = info->tmp_rx_buf; + info->tmp_rx_buf_count = framesize; + + info->icount.rxok++; + + while(copy_count) { + int partial_count = min(copy_count,SCABUFSIZE); + memcpy( ptmp, + info->rx_buf_list_ex[index].virt_addr, + partial_count ); + ptmp += partial_count; + copy_count -= partial_count; + + if ( ++index == info->rx_buf_count ) + index = 0; + } + +#if SYNCLINK_GENERIC_HDLC + if (info->netcount) + hdlcdev_rx(info,info->tmp_rx_buf,framesize); + else +#endif + ldisc_receive_buf(tty,info->tmp_rx_buf, + info->flag_buf, framesize); + } + } + /* Free the buffers used by this frame. */ + rx_free_frame_buffers( info, StartIndex, EndIndex ); + + ReturnCode = true; + +Cleanup: + if ( info->rx_enabled && info->rx_overflow ) { + /* Receiver is enabled, but needs to restarted due to + * rx buffer overflow. If buffers are empty, restart receiver. + */ + if (info->rx_buf_list[EndIndex].status == 0xff) { + spin_lock_irqsave(&info->lock,flags); + rx_start(info); + spin_unlock_irqrestore(&info->lock,flags); + } + } + + return ReturnCode; +} + +/* load the transmit DMA buffer with data + */ +static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count) +{ + unsigned short copy_count; + unsigned int i = 0; + SCADESC *desc; + SCADESC_EX *desc_ex; + + if ( debug_level >= DEBUG_LEVEL_DATA ) + trace_block(info, buf, min_t(unsigned int, count, SCABUFSIZE), 1); + + /* Copy source buffer to one or more DMA buffers, starting with + * the first transmit dma buffer. + */ + for(i=0;;) + { + copy_count = min_t(unsigned int, count, SCABUFSIZE); + + desc = &info->tx_buf_list[i]; + desc_ex = &info->tx_buf_list_ex[i]; + + load_pci_memory(info, desc_ex->virt_addr,buf,copy_count); + + desc->length = copy_count; + desc->status = 0; + + buf += copy_count; + count -= copy_count; + + if (!count) + break; + + i++; + if (i >= info->tx_buf_count) + i = 0; + } + + info->tx_buf_list[i].status = 0x81; /* set EOM and EOT status */ + info->last_tx_buf = ++i; +} + +static bool register_test(SLMP_INFO *info) +{ + static unsigned char testval[] = {0x00, 0xff, 0xaa, 0x55, 0x69, 0x96}; + static unsigned int count = ARRAY_SIZE(testval); + unsigned int i; + bool rc = true; + unsigned long flags; + + spin_lock_irqsave(&info->lock,flags); + reset_port(info); + + /* assume failure */ + info->init_error = DiagStatus_AddressFailure; + + /* Write bit patterns to various registers but do it out of */ + /* sync, then read back and verify values. */ + + for (i = 0 ; i < count ; i++) { + write_reg(info, TMC, testval[i]); + write_reg(info, IDL, testval[(i+1)%count]); + write_reg(info, SA0, testval[(i+2)%count]); + write_reg(info, SA1, testval[(i+3)%count]); + + if ( (read_reg(info, TMC) != testval[i]) || + (read_reg(info, IDL) != testval[(i+1)%count]) || + (read_reg(info, SA0) != testval[(i+2)%count]) || + (read_reg(info, SA1) != testval[(i+3)%count]) ) + { + rc = false; + break; + } + } + + reset_port(info); + spin_unlock_irqrestore(&info->lock,flags); + + return rc; +} + +static bool irq_test(SLMP_INFO *info) +{ + unsigned long timeout; + unsigned long flags; + + unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0; + + spin_lock_irqsave(&info->lock,flags); + reset_port(info); + + /* assume failure */ + info->init_error = DiagStatus_IrqFailure; + info->irq_occurred = false; + + /* setup timer0 on SCA0 to interrupt */ + + /* IER2<7..4> = timer<3..0> interrupt enables (1=enabled) */ + write_reg(info, IER2, (unsigned char)((info->port_num & 1) ? BIT6 : BIT4)); + + write_reg(info, (unsigned char)(timer + TEPR), 0); /* timer expand prescale */ + write_reg16(info, (unsigned char)(timer + TCONR), 1); /* timer constant */ + + + /* TMCS, Timer Control/Status Register + * + * 07 CMF, Compare match flag (read only) 1=match + * 06 ECMI, CMF Interrupt Enable: 1=enabled + * 05 Reserved, must be 0 + * 04 TME, Timer Enable + * 03..00 Reserved, must be 0 + * + * 0101 0000 + */ + write_reg(info, (unsigned char)(timer + TMCS), 0x50); + + spin_unlock_irqrestore(&info->lock,flags); + + timeout=100; + while( timeout-- && !info->irq_occurred ) { + msleep_interruptible(10); + } + + spin_lock_irqsave(&info->lock,flags); + reset_port(info); + spin_unlock_irqrestore(&info->lock,flags); + + return info->irq_occurred; +} + +/* initialize individual SCA device (2 ports) + */ +static bool sca_init(SLMP_INFO *info) +{ + /* set wait controller to single mem partition (low), no wait states */ + write_reg(info, PABR0, 0); /* wait controller addr boundary 0 */ + write_reg(info, PABR1, 0); /* wait controller addr boundary 1 */ + write_reg(info, WCRL, 0); /* wait controller low range */ + write_reg(info, WCRM, 0); /* wait controller mid range */ + write_reg(info, WCRH, 0); /* wait controller high range */ + + /* DPCR, DMA Priority Control + * + * 07..05 Not used, must be 0 + * 04 BRC, bus release condition: 0=all transfers complete + * 03 CCC, channel change condition: 0=every cycle + * 02..00 PR<2..0>, priority 100=round robin + * + * 00000100 = 0x04 + */ + write_reg(info, DPCR, dma_priority); + + /* DMA Master Enable, BIT7: 1=enable all channels */ + write_reg(info, DMER, 0x80); + + /* enable all interrupt classes */ + write_reg(info, IER0, 0xff); /* TxRDY,RxRDY,TxINT,RxINT (ports 0-1) */ + write_reg(info, IER1, 0xff); /* DMIB,DMIA (channels 0-3) */ + write_reg(info, IER2, 0xf0); /* TIRQ (timers 0-3) */ + + /* ITCR, interrupt control register + * 07 IPC, interrupt priority, 0=MSCI->DMA + * 06..05 IAK<1..0>, Acknowledge cycle, 00=non-ack cycle + * 04 VOS, Vector Output, 0=unmodified vector + * 03..00 Reserved, must be 0 + */ + write_reg(info, ITCR, 0); + + return true; +} + +/* initialize adapter hardware + */ +static bool init_adapter(SLMP_INFO *info) +{ + int i; + + /* Set BIT30 of Local Control Reg 0x50 to reset SCA */ + volatile u32 *MiscCtrl = (u32 *)(info->lcr_base + 0x50); + u32 readval; + + info->misc_ctrl_value |= BIT30; + *MiscCtrl = info->misc_ctrl_value; + + /* + * Force at least 170ns delay before clearing + * reset bit. Each read from LCR takes at least + * 30ns so 10 times for 300ns to be safe. + */ + for(i=0;i<10;i++) + readval = *MiscCtrl; + + info->misc_ctrl_value &= ~BIT30; + *MiscCtrl = info->misc_ctrl_value; + + /* init control reg (all DTRs off, all clksel=input) */ + info->ctrlreg_value = 0xaa; + write_control_reg(info); + + { + volatile u32 *LCR1BRDR = (u32 *)(info->lcr_base + 0x2c); + lcr1_brdr_value &= ~(BIT5 + BIT4 + BIT3); + + switch(read_ahead_count) + { + case 16: + lcr1_brdr_value |= BIT5 + BIT4 + BIT3; + break; + case 8: + lcr1_brdr_value |= BIT5 + BIT4; + break; + case 4: + lcr1_brdr_value |= BIT5 + BIT3; + break; + case 0: + lcr1_brdr_value |= BIT5; + break; + } + + *LCR1BRDR = lcr1_brdr_value; + *MiscCtrl = misc_ctrl_value; + } + + sca_init(info->port_array[0]); + sca_init(info->port_array[2]); + + return true; +} + +/* Loopback an HDLC frame to test the hardware + * interrupt and DMA functions. + */ +static bool loopback_test(SLMP_INFO *info) +{ +#define TESTFRAMESIZE 20 + + unsigned long timeout; + u16 count = TESTFRAMESIZE; + unsigned char buf[TESTFRAMESIZE]; + bool rc = false; + unsigned long flags; + + struct tty_struct *oldtty = info->port.tty; + u32 speed = info->params.clock_speed; + + info->params.clock_speed = 3686400; + info->port.tty = NULL; + + /* assume failure */ + info->init_error = DiagStatus_DmaFailure; + + /* build and send transmit frame */ + for (count = 0; count < TESTFRAMESIZE;++count) + buf[count] = (unsigned char)count; + + memset(info->tmp_rx_buf,0,TESTFRAMESIZE); + + /* program hardware for HDLC and enabled receiver */ + spin_lock_irqsave(&info->lock,flags); + hdlc_mode(info); + enable_loopback(info,1); + rx_start(info); + info->tx_count = count; + tx_load_dma_buffer(info,buf,count); + tx_start(info); + spin_unlock_irqrestore(&info->lock,flags); + + /* wait for receive complete */ + /* Set a timeout for waiting for interrupt. */ + for ( timeout = 100; timeout; --timeout ) { + msleep_interruptible(10); + + if (rx_get_frame(info)) { + rc = true; + break; + } + } + + /* verify received frame length and contents */ + if (rc && + ( info->tmp_rx_buf_count != count || + memcmp(buf, info->tmp_rx_buf,count))) { + rc = false; + } + + spin_lock_irqsave(&info->lock,flags); + reset_adapter(info); + spin_unlock_irqrestore(&info->lock,flags); + + info->params.clock_speed = speed; + info->port.tty = oldtty; + + return rc; +} + +/* Perform diagnostics on hardware + */ +static int adapter_test( SLMP_INFO *info ) +{ + unsigned long flags; + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):Testing device %s\n", + __FILE__,__LINE__,info->device_name ); + + spin_lock_irqsave(&info->lock,flags); + init_adapter(info); + spin_unlock_irqrestore(&info->lock,flags); + + info->port_array[0]->port_count = 0; + + if ( register_test(info->port_array[0]) && + register_test(info->port_array[1])) { + + info->port_array[0]->port_count = 2; + + if ( register_test(info->port_array[2]) && + register_test(info->port_array[3]) ) + info->port_array[0]->port_count += 2; + } + else { + printk( "%s(%d):Register test failure for device %s Addr=%08lX\n", + __FILE__,__LINE__,info->device_name, (unsigned long)(info->phys_sca_base)); + return -ENODEV; + } + + if ( !irq_test(info->port_array[0]) || + !irq_test(info->port_array[1]) || + (info->port_count == 4 && !irq_test(info->port_array[2])) || + (info->port_count == 4 && !irq_test(info->port_array[3]))) { + printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n", + __FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) ); + return -ENODEV; + } + + if (!loopback_test(info->port_array[0]) || + !loopback_test(info->port_array[1]) || + (info->port_count == 4 && !loopback_test(info->port_array[2])) || + (info->port_count == 4 && !loopback_test(info->port_array[3]))) { + printk( "%s(%d):DMA test failure for device %s\n", + __FILE__,__LINE__,info->device_name); + return -ENODEV; + } + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):device %s passed diagnostics\n", + __FILE__,__LINE__,info->device_name ); + + info->port_array[0]->init_error = 0; + info->port_array[1]->init_error = 0; + if ( info->port_count > 2 ) { + info->port_array[2]->init_error = 0; + info->port_array[3]->init_error = 0; + } + + return 0; +} + +/* Test the shared memory on a PCI adapter. + */ +static bool memory_test(SLMP_INFO *info) +{ + static unsigned long testval[] = { 0x0, 0x55555555, 0xaaaaaaaa, + 0x66666666, 0x99999999, 0xffffffff, 0x12345678 }; + unsigned long count = ARRAY_SIZE(testval); + unsigned long i; + unsigned long limit = SCA_MEM_SIZE/sizeof(unsigned long); + unsigned long * addr = (unsigned long *)info->memory_base; + + /* Test data lines with test pattern at one location. */ + + for ( i = 0 ; i < count ; i++ ) { + *addr = testval[i]; + if ( *addr != testval[i] ) + return false; + } + + /* Test address lines with incrementing pattern over */ + /* entire address range. */ + + for ( i = 0 ; i < limit ; i++ ) { + *addr = i * 4; + addr++; + } + + addr = (unsigned long *)info->memory_base; + + for ( i = 0 ; i < limit ; i++ ) { + if ( *addr != i * 4 ) + return false; + addr++; + } + + memset( info->memory_base, 0, SCA_MEM_SIZE ); + return true; +} + +/* Load data into PCI adapter shared memory. + * + * The PCI9050 releases control of the local bus + * after completing the current read or write operation. + * + * While the PCI9050 write FIFO not empty, the + * PCI9050 treats all of the writes as a single transaction + * and does not release the bus. This causes DMA latency problems + * at high speeds when copying large data blocks to the shared memory. + * + * This function breaks a write into multiple transations by + * interleaving a read which flushes the write FIFO and 'completes' + * the write transation. This allows any pending DMA request to gain control + * of the local bus in a timely fasion. + */ +static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count) +{ + /* A load interval of 16 allows for 4 32-bit writes at */ + /* 136ns each for a maximum latency of 542ns on the local bus.*/ + + unsigned short interval = count / sca_pci_load_interval; + unsigned short i; + + for ( i = 0 ; i < interval ; i++ ) + { + memcpy(dest, src, sca_pci_load_interval); + read_status_reg(info); + dest += sca_pci_load_interval; + src += sca_pci_load_interval; + } + + memcpy(dest, src, count % sca_pci_load_interval); +} + +static void trace_block(SLMP_INFO *info,const char* data, int count, int xmit) +{ + int i; + int linecount; + if (xmit) + printk("%s tx data:\n",info->device_name); + else + printk("%s rx data:\n",info->device_name); + + while(count) { + if (count > 16) + linecount = 16; + else + linecount = count; + + for(i=0;i=040 && data[i]<=0176) + printk("%c",data[i]); + else + printk("."); + } + printk("\n"); + + data += linecount; + count -= linecount; + } +} /* end of trace_block() */ + +/* called when HDLC frame times out + * update stats and do tx completion processing + */ +static void tx_timeout(struct timer_list *t) +{ + SLMP_INFO *info = from_timer(info, t, tx_timer); + unsigned long flags; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):%s tx_timeout()\n", + __FILE__,__LINE__,info->device_name); + if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) { + info->icount.txtimeout++; + } + spin_lock_irqsave(&info->lock,flags); + info->tx_active = false; + info->tx_count = info->tx_put = info->tx_get = 0; + + spin_unlock_irqrestore(&info->lock,flags); + +#if SYNCLINK_GENERIC_HDLC + if (info->netcount) + hdlcdev_tx_done(info); + else +#endif + bh_transmit(info); +} + +/* called to periodically check the DSR/RI modem signal input status + */ +static void status_timeout(struct timer_list *t) +{ + u16 status = 0; + SLMP_INFO *info = from_timer(info, t, status_timer); + unsigned long flags; + unsigned char delta; + + + spin_lock_irqsave(&info->lock,flags); + get_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + + /* check for DSR/RI state change */ + + delta = info->old_signals ^ info->serial_signals; + info->old_signals = info->serial_signals; + + if (delta & SerialSignal_DSR) + status |= MISCSTATUS_DSR_LATCHED|(info->serial_signals&SerialSignal_DSR); + + if (delta & SerialSignal_RI) + status |= MISCSTATUS_RI_LATCHED|(info->serial_signals&SerialSignal_RI); + + if (delta & SerialSignal_DCD) + status |= MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD); + + if (delta & SerialSignal_CTS) + status |= MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS); + + if (status) + isr_io_pin(info,status); + + mod_timer(&info->status_timer, jiffies + msecs_to_jiffies(10)); +} + + +/* Register Access Routines - + * All registers are memory mapped + */ +#define CALC_REGADDR() \ + unsigned char * RegAddr = (unsigned char*)(info->sca_base + Addr); \ + if (info->port_num > 1) \ + RegAddr += 256; /* port 0-1 SCA0, 2-3 SCA1 */ \ + if ( info->port_num & 1) { \ + if (Addr > 0x7f) \ + RegAddr += 0x40; /* DMA access */ \ + else if (Addr > 0x1f && Addr < 0x60) \ + RegAddr += 0x20; /* MSCI access */ \ + } + + +static unsigned char read_reg(SLMP_INFO * info, unsigned char Addr) +{ + CALC_REGADDR(); + return *RegAddr; +} +static void write_reg(SLMP_INFO * info, unsigned char Addr, unsigned char Value) +{ + CALC_REGADDR(); + *RegAddr = Value; +} + +static u16 read_reg16(SLMP_INFO * info, unsigned char Addr) +{ + CALC_REGADDR(); + return *((u16 *)RegAddr); +} + +static void write_reg16(SLMP_INFO * info, unsigned char Addr, u16 Value) +{ + CALC_REGADDR(); + *((u16 *)RegAddr) = Value; +} + +static unsigned char read_status_reg(SLMP_INFO * info) +{ + unsigned char *RegAddr = (unsigned char *)info->statctrl_base; + return *RegAddr; +} + +static void write_control_reg(SLMP_INFO * info) +{ + unsigned char *RegAddr = (unsigned char *)info->statctrl_base; + *RegAddr = info->port_array[0]->ctrlreg_value; +} + + +static int synclinkmp_init_one (struct pci_dev *dev, + const struct pci_device_id *ent) +{ + if (pci_enable_device(dev)) { + printk("error enabling pci device %p\n", dev); + return -EIO; + } + return device_init( ++synclinkmp_adapter_count, dev ); +} + +static void synclinkmp_remove_one (struct pci_dev *dev) +{ +} diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c new file mode 100644 index 000000000..ad08eddc1 --- /dev/null +++ b/drivers/tty/sysrq.c @@ -0,0 +1,1198 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Linux Magic System Request Key Hacks + * + * (c) 1997 Martin Mares + * based on ideas by Pavel Machek + * + * (c) 2000 Crutcher Dunnavant + * overhauled to use key registration + * based upon discusions in irc://irc.openprojects.net/#kernelnewbies + * + * Copyright (c) 2010 Dmitry Torokhov + * Input handler conversion + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +/* Whether we react on sysrq keys or just ignore them */ +static int __read_mostly sysrq_enabled = CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE; +static bool __read_mostly sysrq_always_enabled; + +static bool sysrq_on(void) +{ + return sysrq_enabled || sysrq_always_enabled; +} + +/** + * sysrq_mask - Getter for sysrq_enabled mask. + * + * Return: 1 if sysrq is always enabled, enabled sysrq_key_op mask otherwise. + */ +int sysrq_mask(void) +{ + if (sysrq_always_enabled) + return 1; + return sysrq_enabled; +} +EXPORT_SYMBOL_GPL(sysrq_mask); + +/* + * A value of 1 means 'all', other nonzero values are an op mask: + */ +static bool sysrq_on_mask(int mask) +{ + return sysrq_always_enabled || + sysrq_enabled == 1 || + (sysrq_enabled & mask); +} + +static int __init sysrq_always_enabled_setup(char *str) +{ + sysrq_always_enabled = true; + pr_info("sysrq always enabled.\n"); + + return 1; +} + +__setup("sysrq_always_enabled", sysrq_always_enabled_setup); + + +static void sysrq_handle_loglevel(int key) +{ + int i; + + i = key - '0'; + console_loglevel = CONSOLE_LOGLEVEL_DEFAULT; + pr_info("Loglevel set to %d\n", i); + console_loglevel = i; +} +static const struct sysrq_key_op sysrq_loglevel_op = { + .handler = sysrq_handle_loglevel, + .help_msg = "loglevel(0-9)", + .action_msg = "Changing Loglevel", + .enable_mask = SYSRQ_ENABLE_LOG, +}; + +#ifdef CONFIG_VT +static void sysrq_handle_SAK(int key) +{ + struct work_struct *SAK_work = &vc_cons[fg_console].SAK_work; + schedule_work(SAK_work); +} +static const struct sysrq_key_op sysrq_SAK_op = { + .handler = sysrq_handle_SAK, + .help_msg = "sak(k)", + .action_msg = "SAK", + .enable_mask = SYSRQ_ENABLE_KEYBOARD, +}; +#else +#define sysrq_SAK_op (*(const struct sysrq_key_op *)NULL) +#endif + +#ifdef CONFIG_VT +static void sysrq_handle_unraw(int key) +{ + vt_reset_unicode(fg_console); +} + +static const struct sysrq_key_op sysrq_unraw_op = { + .handler = sysrq_handle_unraw, + .help_msg = "unraw(r)", + .action_msg = "Keyboard mode set to system default", + .enable_mask = SYSRQ_ENABLE_KEYBOARD, +}; +#else +#define sysrq_unraw_op (*(const struct sysrq_key_op *)NULL) +#endif /* CONFIG_VT */ + +static void sysrq_handle_crash(int key) +{ + /* release the RCU read lock before crashing */ + rcu_read_unlock(); + + panic("sysrq triggered crash\n"); +} +static const struct sysrq_key_op sysrq_crash_op = { + .handler = sysrq_handle_crash, + .help_msg = "crash(c)", + .action_msg = "Trigger a crash", + .enable_mask = SYSRQ_ENABLE_DUMP, +}; + +static void sysrq_handle_reboot(int key) +{ + lockdep_off(); + local_irq_enable(); + emergency_restart(); +} +static const struct sysrq_key_op sysrq_reboot_op = { + .handler = sysrq_handle_reboot, + .help_msg = "reboot(b)", + .action_msg = "Resetting", + .enable_mask = SYSRQ_ENABLE_BOOT, +}; + +const struct sysrq_key_op *__sysrq_reboot_op = &sysrq_reboot_op; + +static void sysrq_handle_sync(int key) +{ + emergency_sync(); +} +static const struct sysrq_key_op sysrq_sync_op = { + .handler = sysrq_handle_sync, + .help_msg = "sync(s)", + .action_msg = "Emergency Sync", + .enable_mask = SYSRQ_ENABLE_SYNC, +}; + +static void sysrq_handle_show_timers(int key) +{ + sysrq_timer_list_show(); +} + +static const struct sysrq_key_op sysrq_show_timers_op = { + .handler = sysrq_handle_show_timers, + .help_msg = "show-all-timers(q)", + .action_msg = "Show clockevent devices & pending hrtimers (no others)", +}; + +static void sysrq_handle_mountro(int key) +{ + emergency_remount(); +} +static const struct sysrq_key_op sysrq_mountro_op = { + .handler = sysrq_handle_mountro, + .help_msg = "unmount(u)", + .action_msg = "Emergency Remount R/O", + .enable_mask = SYSRQ_ENABLE_REMOUNT, +}; + +#ifdef CONFIG_LOCKDEP +static void sysrq_handle_showlocks(int key) +{ + debug_show_all_locks(); +} + +static const struct sysrq_key_op sysrq_showlocks_op = { + .handler = sysrq_handle_showlocks, + .help_msg = "show-all-locks(d)", + .action_msg = "Show Locks Held", +}; +#else +#define sysrq_showlocks_op (*(const struct sysrq_key_op *)NULL) +#endif + +#ifdef CONFIG_SMP +static DEFINE_RAW_SPINLOCK(show_lock); + +static void showacpu(void *dummy) +{ + unsigned long flags; + + /* Idle CPUs have no interesting backtrace. */ + if (idle_cpu(smp_processor_id())) { + pr_info("CPU%d: backtrace skipped as idling\n", smp_processor_id()); + return; + } + + raw_spin_lock_irqsave(&show_lock, flags); + pr_info("CPU%d:\n", smp_processor_id()); + show_stack(NULL, NULL, KERN_INFO); + raw_spin_unlock_irqrestore(&show_lock, flags); +} + +static void sysrq_showregs_othercpus(struct work_struct *dummy) +{ + smp_call_function(showacpu, NULL, 0); +} + +static DECLARE_WORK(sysrq_showallcpus, sysrq_showregs_othercpus); + +static void sysrq_handle_showallcpus(int key) +{ + /* + * Fall back to the workqueue based printing if the + * backtrace printing did not succeed or the + * architecture has no support for it: + */ + if (!trigger_all_cpu_backtrace()) { + struct pt_regs *regs = NULL; + + if (in_irq()) + regs = get_irq_regs(); + + pr_info("CPU%d:\n", get_cpu()); + if (regs) + show_regs(regs); + else + show_stack(NULL, NULL, KERN_INFO); + + schedule_work(&sysrq_showallcpus); + put_cpu(); + } +} + +static const struct sysrq_key_op sysrq_showallcpus_op = { + .handler = sysrq_handle_showallcpus, + .help_msg = "show-backtrace-all-active-cpus(l)", + .action_msg = "Show backtrace of all active CPUs", + .enable_mask = SYSRQ_ENABLE_DUMP, +}; +#endif + +static void sysrq_handle_showregs(int key) +{ + struct pt_regs *regs = NULL; + + if (in_irq()) + regs = get_irq_regs(); + if (regs) + show_regs(regs); + perf_event_print_debug(); +} +static const struct sysrq_key_op sysrq_showregs_op = { + .handler = sysrq_handle_showregs, + .help_msg = "show-registers(p)", + .action_msg = "Show Regs", + .enable_mask = SYSRQ_ENABLE_DUMP, +}; + +static void sysrq_handle_showstate(int key) +{ + show_state(); + show_workqueue_state(); +} +static const struct sysrq_key_op sysrq_showstate_op = { + .handler = sysrq_handle_showstate, + .help_msg = "show-task-states(t)", + .action_msg = "Show State", + .enable_mask = SYSRQ_ENABLE_DUMP, +}; + +static void sysrq_handle_showstate_blocked(int key) +{ + show_state_filter(TASK_UNINTERRUPTIBLE); +} +static const struct sysrq_key_op sysrq_showstate_blocked_op = { + .handler = sysrq_handle_showstate_blocked, + .help_msg = "show-blocked-tasks(w)", + .action_msg = "Show Blocked State", + .enable_mask = SYSRQ_ENABLE_DUMP, +}; + +#ifdef CONFIG_TRACING +#include + +static void sysrq_ftrace_dump(int key) +{ + ftrace_dump(DUMP_ALL); +} +static const struct sysrq_key_op sysrq_ftrace_dump_op = { + .handler = sysrq_ftrace_dump, + .help_msg = "dump-ftrace-buffer(z)", + .action_msg = "Dump ftrace buffer", + .enable_mask = SYSRQ_ENABLE_DUMP, +}; +#else +#define sysrq_ftrace_dump_op (*(const struct sysrq_key_op *)NULL) +#endif + +static void sysrq_handle_showmem(int key) +{ + show_mem(0, NULL); +} +static const struct sysrq_key_op sysrq_showmem_op = { + .handler = sysrq_handle_showmem, + .help_msg = "show-memory-usage(m)", + .action_msg = "Show Memory", + .enable_mask = SYSRQ_ENABLE_DUMP, +}; + +/* + * Signal sysrq helper function. Sends a signal to all user processes. + */ +static void send_sig_all(int sig) +{ + struct task_struct *p; + + read_lock(&tasklist_lock); + for_each_process(p) { + if (p->flags & PF_KTHREAD) + continue; + if (is_global_init(p)) + continue; + + do_send_sig_info(sig, SEND_SIG_PRIV, p, PIDTYPE_MAX); + } + read_unlock(&tasklist_lock); +} + +static void sysrq_handle_term(int key) +{ + send_sig_all(SIGTERM); + console_loglevel = CONSOLE_LOGLEVEL_DEBUG; +} +static const struct sysrq_key_op sysrq_term_op = { + .handler = sysrq_handle_term, + .help_msg = "terminate-all-tasks(e)", + .action_msg = "Terminate All Tasks", + .enable_mask = SYSRQ_ENABLE_SIGNAL, +}; + +static void moom_callback(struct work_struct *ignored) +{ + const gfp_t gfp_mask = GFP_KERNEL; + struct oom_control oc = { + .zonelist = node_zonelist(first_memory_node, gfp_mask), + .nodemask = NULL, + .memcg = NULL, + .gfp_mask = gfp_mask, + .order = -1, + }; + + mutex_lock(&oom_lock); + if (!out_of_memory(&oc)) + pr_info("OOM request ignored. No task eligible\n"); + mutex_unlock(&oom_lock); +} + +static DECLARE_WORK(moom_work, moom_callback); + +static void sysrq_handle_moom(int key) +{ + schedule_work(&moom_work); +} +static const struct sysrq_key_op sysrq_moom_op = { + .handler = sysrq_handle_moom, + .help_msg = "memory-full-oom-kill(f)", + .action_msg = "Manual OOM execution", + .enable_mask = SYSRQ_ENABLE_SIGNAL, +}; + +static void sysrq_handle_thaw(int key) +{ + emergency_thaw_all(); +} +static const struct sysrq_key_op sysrq_thaw_op = { + .handler = sysrq_handle_thaw, + .help_msg = "thaw-filesystems(j)", + .action_msg = "Emergency Thaw of all frozen filesystems", + .enable_mask = SYSRQ_ENABLE_SIGNAL, +}; + +static void sysrq_handle_kill(int key) +{ + send_sig_all(SIGKILL); + console_loglevel = CONSOLE_LOGLEVEL_DEBUG; +} +static const struct sysrq_key_op sysrq_kill_op = { + .handler = sysrq_handle_kill, + .help_msg = "kill-all-tasks(i)", + .action_msg = "Kill All Tasks", + .enable_mask = SYSRQ_ENABLE_SIGNAL, +}; + +static void sysrq_handle_unrt(int key) +{ + normalize_rt_tasks(); +} +static const struct sysrq_key_op sysrq_unrt_op = { + .handler = sysrq_handle_unrt, + .help_msg = "nice-all-RT-tasks(n)", + .action_msg = "Nice All RT Tasks", + .enable_mask = SYSRQ_ENABLE_RTNICE, +}; + +/* Key Operations table and lock */ +static DEFINE_SPINLOCK(sysrq_key_table_lock); + +static const struct sysrq_key_op *sysrq_key_table[62] = { + &sysrq_loglevel_op, /* 0 */ + &sysrq_loglevel_op, /* 1 */ + &sysrq_loglevel_op, /* 2 */ + &sysrq_loglevel_op, /* 3 */ + &sysrq_loglevel_op, /* 4 */ + &sysrq_loglevel_op, /* 5 */ + &sysrq_loglevel_op, /* 6 */ + &sysrq_loglevel_op, /* 7 */ + &sysrq_loglevel_op, /* 8 */ + &sysrq_loglevel_op, /* 9 */ + + /* + * a: Don't use for system provided sysrqs, it is handled specially on + * sparc and will never arrive. + */ + NULL, /* a */ + &sysrq_reboot_op, /* b */ + &sysrq_crash_op, /* c */ + &sysrq_showlocks_op, /* d */ + &sysrq_term_op, /* e */ + &sysrq_moom_op, /* f */ + /* g: May be registered for the kernel debugger */ + NULL, /* g */ + NULL, /* h - reserved for help */ + &sysrq_kill_op, /* i */ +#ifdef CONFIG_BLOCK + &sysrq_thaw_op, /* j */ +#else + NULL, /* j */ +#endif + &sysrq_SAK_op, /* k */ +#ifdef CONFIG_SMP + &sysrq_showallcpus_op, /* l */ +#else + NULL, /* l */ +#endif + &sysrq_showmem_op, /* m */ + &sysrq_unrt_op, /* n */ + /* o: This will often be registered as 'Off' at init time */ + NULL, /* o */ + &sysrq_showregs_op, /* p */ + &sysrq_show_timers_op, /* q */ + &sysrq_unraw_op, /* r */ + &sysrq_sync_op, /* s */ + &sysrq_showstate_op, /* t */ + &sysrq_mountro_op, /* u */ + /* v: May be registered for frame buffer console restore */ + NULL, /* v */ + &sysrq_showstate_blocked_op, /* w */ + /* x: May be registered on mips for TLB dump */ + /* x: May be registered on ppc/powerpc for xmon */ + /* x: May be registered on sparc64 for global PMU dump */ + NULL, /* x */ + /* y: May be registered on sparc64 for global register dump */ + NULL, /* y */ + &sysrq_ftrace_dump_op, /* z */ + NULL, /* A */ + NULL, /* B */ + NULL, /* C */ + NULL, /* D */ + NULL, /* E */ + NULL, /* F */ + NULL, /* G */ + NULL, /* H */ + NULL, /* I */ + NULL, /* J */ + NULL, /* K */ + NULL, /* L */ + NULL, /* M */ + NULL, /* N */ + NULL, /* O */ + NULL, /* P */ + NULL, /* Q */ + NULL, /* R */ + NULL, /* S */ + NULL, /* T */ + NULL, /* U */ + NULL, /* V */ + NULL, /* W */ + NULL, /* X */ + NULL, /* Y */ + NULL, /* Z */ +}; + +/* key2index calculation, -1 on invalid index */ +static int sysrq_key_table_key2index(int key) +{ + int retval; + + if ((key >= '0') && (key <= '9')) + retval = key - '0'; + else if ((key >= 'a') && (key <= 'z')) + retval = key + 10 - 'a'; + else if ((key >= 'A') && (key <= 'Z')) + retval = key + 36 - 'A'; + else + retval = -1; + return retval; +} + +/* + * get and put functions for the table, exposed to modules. + */ +static const struct sysrq_key_op *__sysrq_get_key_op(int key) +{ + const struct sysrq_key_op *op_p = NULL; + int i; + + i = sysrq_key_table_key2index(key); + if (i != -1) + op_p = sysrq_key_table[i]; + + return op_p; +} + +static void __sysrq_put_key_op(int key, const struct sysrq_key_op *op_p) +{ + int i = sysrq_key_table_key2index(key); + + if (i != -1) + sysrq_key_table[i] = op_p; +} + +void __handle_sysrq(int key, bool check_mask) +{ + const struct sysrq_key_op *op_p; + int orig_log_level; + int orig_suppress_printk; + int i; + + orig_suppress_printk = suppress_printk; + suppress_printk = 0; + + rcu_sysrq_start(); + rcu_read_lock(); + /* + * Raise the apparent loglevel to maximum so that the sysrq header + * is shown to provide the user with positive feedback. We do not + * simply emit this at KERN_EMERG as that would change message + * routing in the consumers of /proc/kmsg. + */ + orig_log_level = console_loglevel; + console_loglevel = CONSOLE_LOGLEVEL_DEFAULT; + + op_p = __sysrq_get_key_op(key); + if (op_p) { + /* + * Should we check for enabled operations (/proc/sysrq-trigger + * should not) and is the invoked operation enabled? + */ + if (!check_mask || sysrq_on_mask(op_p->enable_mask)) { + pr_info("%s\n", op_p->action_msg); + console_loglevel = orig_log_level; + op_p->handler(key); + } else { + pr_info("This sysrq operation is disabled.\n"); + console_loglevel = orig_log_level; + } + } else { + pr_info("HELP : "); + /* Only print the help msg once per handler */ + for (i = 0; i < ARRAY_SIZE(sysrq_key_table); i++) { + if (sysrq_key_table[i]) { + int j; + + for (j = 0; sysrq_key_table[i] != + sysrq_key_table[j]; j++) + ; + if (j != i) + continue; + pr_cont("%s ", sysrq_key_table[i]->help_msg); + } + } + pr_cont("\n"); + console_loglevel = orig_log_level; + } + rcu_read_unlock(); + rcu_sysrq_end(); + + suppress_printk = orig_suppress_printk; +} + +void handle_sysrq(int key) +{ + if (sysrq_on()) + __handle_sysrq(key, true); +} +EXPORT_SYMBOL(handle_sysrq); + +#ifdef CONFIG_INPUT +static int sysrq_reset_downtime_ms; + +/* Simple translation table for the SysRq keys */ +static const unsigned char sysrq_xlate[KEY_CNT] = + "\000\0331234567890-=\177\t" /* 0x00 - 0x0f */ + "qwertyuiop[]\r\000as" /* 0x10 - 0x1f */ + "dfghjkl;'`\000\\zxcv" /* 0x20 - 0x2f */ + "bnm,./\000*\000 \000\201\202\203\204\205" /* 0x30 - 0x3f */ + "\206\207\210\211\212\000\000789-456+1" /* 0x40 - 0x4f */ + "230\177\000\000\213\214\000\000\000\000\000\000\000\000\000\000" /* 0x50 - 0x5f */ + "\r\000/"; /* 0x60 - 0x6f */ + +struct sysrq_state { + struct input_handle handle; + struct work_struct reinject_work; + unsigned long key_down[BITS_TO_LONGS(KEY_CNT)]; + unsigned int alt; + unsigned int alt_use; + unsigned int shift; + unsigned int shift_use; + bool active; + bool need_reinject; + bool reinjecting; + + /* reset sequence handling */ + bool reset_canceled; + bool reset_requested; + unsigned long reset_keybit[BITS_TO_LONGS(KEY_CNT)]; + int reset_seq_len; + int reset_seq_cnt; + int reset_seq_version; + struct timer_list keyreset_timer; +}; + +#define SYSRQ_KEY_RESET_MAX 20 /* Should be plenty */ +static unsigned short sysrq_reset_seq[SYSRQ_KEY_RESET_MAX]; +static unsigned int sysrq_reset_seq_len; +static unsigned int sysrq_reset_seq_version = 1; + +static void sysrq_parse_reset_sequence(struct sysrq_state *state) +{ + int i; + unsigned short key; + + state->reset_seq_cnt = 0; + + for (i = 0; i < sysrq_reset_seq_len; i++) { + key = sysrq_reset_seq[i]; + + if (key == KEY_RESERVED || key > KEY_MAX) + break; + + __set_bit(key, state->reset_keybit); + state->reset_seq_len++; + + if (test_bit(key, state->key_down)) + state->reset_seq_cnt++; + } + + /* Disable reset until old keys are not released */ + state->reset_canceled = state->reset_seq_cnt != 0; + + state->reset_seq_version = sysrq_reset_seq_version; +} + +static void sysrq_do_reset(struct timer_list *t) +{ + struct sysrq_state *state = from_timer(state, t, keyreset_timer); + + state->reset_requested = true; + + orderly_reboot(); +} + +static void sysrq_handle_reset_request(struct sysrq_state *state) +{ + if (state->reset_requested) + __handle_sysrq(sysrq_xlate[KEY_B], false); + + if (sysrq_reset_downtime_ms) + mod_timer(&state->keyreset_timer, + jiffies + msecs_to_jiffies(sysrq_reset_downtime_ms)); + else + sysrq_do_reset(&state->keyreset_timer); +} + +static void sysrq_detect_reset_sequence(struct sysrq_state *state, + unsigned int code, int value) +{ + if (!test_bit(code, state->reset_keybit)) { + /* + * Pressing any key _not_ in reset sequence cancels + * the reset sequence. Also cancelling the timer in + * case additional keys were pressed after a reset + * has been requested. + */ + if (value && state->reset_seq_cnt) { + state->reset_canceled = true; + del_timer(&state->keyreset_timer); + } + } else if (value == 0) { + /* + * Key release - all keys in the reset sequence need + * to be pressed and held for the reset timeout + * to hold. + */ + del_timer(&state->keyreset_timer); + + if (--state->reset_seq_cnt == 0) + state->reset_canceled = false; + } else if (value == 1) { + /* key press, not autorepeat */ + if (++state->reset_seq_cnt == state->reset_seq_len && + !state->reset_canceled) { + sysrq_handle_reset_request(state); + } + } +} + +#ifdef CONFIG_OF +static void sysrq_of_get_keyreset_config(void) +{ + u32 key; + struct device_node *np; + struct property *prop; + const __be32 *p; + + np = of_find_node_by_path("/chosen/linux,sysrq-reset-seq"); + if (!np) { + pr_debug("No sysrq node found"); + return; + } + + /* Reset in case a __weak definition was present */ + sysrq_reset_seq_len = 0; + + of_property_for_each_u32(np, "keyset", prop, p, key) { + if (key == KEY_RESERVED || key > KEY_MAX || + sysrq_reset_seq_len == SYSRQ_KEY_RESET_MAX) + break; + + sysrq_reset_seq[sysrq_reset_seq_len++] = (unsigned short)key; + } + + /* Get reset timeout if any. */ + of_property_read_u32(np, "timeout-ms", &sysrq_reset_downtime_ms); + + of_node_put(np); +} +#else +static void sysrq_of_get_keyreset_config(void) +{ +} +#endif + +static void sysrq_reinject_alt_sysrq(struct work_struct *work) +{ + struct sysrq_state *sysrq = + container_of(work, struct sysrq_state, reinject_work); + struct input_handle *handle = &sysrq->handle; + unsigned int alt_code = sysrq->alt_use; + + if (sysrq->need_reinject) { + /* we do not want the assignment to be reordered */ + sysrq->reinjecting = true; + mb(); + + /* Simulate press and release of Alt + SysRq */ + input_inject_event(handle, EV_KEY, alt_code, 1); + input_inject_event(handle, EV_KEY, KEY_SYSRQ, 1); + input_inject_event(handle, EV_SYN, SYN_REPORT, 1); + + input_inject_event(handle, EV_KEY, KEY_SYSRQ, 0); + input_inject_event(handle, EV_KEY, alt_code, 0); + input_inject_event(handle, EV_SYN, SYN_REPORT, 1); + + mb(); + sysrq->reinjecting = false; + } +} + +static bool sysrq_handle_keypress(struct sysrq_state *sysrq, + unsigned int code, int value) +{ + bool was_active = sysrq->active; + bool suppress; + + switch (code) { + + case KEY_LEFTALT: + case KEY_RIGHTALT: + if (!value) { + /* One of ALTs is being released */ + if (sysrq->active && code == sysrq->alt_use) + sysrq->active = false; + + sysrq->alt = KEY_RESERVED; + + } else if (value != 2) { + sysrq->alt = code; + sysrq->need_reinject = false; + } + break; + + case KEY_LEFTSHIFT: + case KEY_RIGHTSHIFT: + if (!value) + sysrq->shift = KEY_RESERVED; + else if (value != 2) + sysrq->shift = code; + break; + + case KEY_SYSRQ: + if (value == 1 && sysrq->alt != KEY_RESERVED) { + sysrq->active = true; + sysrq->alt_use = sysrq->alt; + /* either RESERVED (for released) or actual code */ + sysrq->shift_use = sysrq->shift; + /* + * If nothing else will be pressed we'll need + * to re-inject Alt-SysRq keysroke. + */ + sysrq->need_reinject = true; + } + + /* + * Pretend that sysrq was never pressed at all. This + * is needed to properly handle KGDB which will try + * to release all keys after exiting debugger. If we + * do not clear key bit it KGDB will end up sending + * release events for Alt and SysRq, potentially + * triggering print screen function. + */ + if (sysrq->active) + clear_bit(KEY_SYSRQ, sysrq->handle.dev->key); + + break; + + default: + if (sysrq->active && value && value != 2) { + unsigned char c = sysrq_xlate[code]; + + sysrq->need_reinject = false; + if (sysrq->shift_use != KEY_RESERVED) + c = toupper(c); + __handle_sysrq(c, true); + } + break; + } + + suppress = sysrq->active; + + if (!sysrq->active) { + + /* + * See if reset sequence has changed since the last time. + */ + if (sysrq->reset_seq_version != sysrq_reset_seq_version) + sysrq_parse_reset_sequence(sysrq); + + /* + * If we are not suppressing key presses keep track of + * keyboard state so we can release keys that have been + * pressed before entering SysRq mode. + */ + if (value) + set_bit(code, sysrq->key_down); + else + clear_bit(code, sysrq->key_down); + + if (was_active) + schedule_work(&sysrq->reinject_work); + + /* Check for reset sequence */ + sysrq_detect_reset_sequence(sysrq, code, value); + + } else if (value == 0 && test_and_clear_bit(code, sysrq->key_down)) { + /* + * Pass on release events for keys that was pressed before + * entering SysRq mode. + */ + suppress = false; + } + + return suppress; +} + +static bool sysrq_filter(struct input_handle *handle, + unsigned int type, unsigned int code, int value) +{ + struct sysrq_state *sysrq = handle->private; + bool suppress; + + /* + * Do not filter anything if we are in the process of re-injecting + * Alt+SysRq combination. + */ + if (sysrq->reinjecting) + return false; + + switch (type) { + + case EV_SYN: + suppress = false; + break; + + case EV_KEY: + suppress = sysrq_handle_keypress(sysrq, code, value); + break; + + default: + suppress = sysrq->active; + break; + } + + return suppress; +} + +static int sysrq_connect(struct input_handler *handler, + struct input_dev *dev, + const struct input_device_id *id) +{ + struct sysrq_state *sysrq; + int error; + + sysrq = kzalloc(sizeof(struct sysrq_state), GFP_KERNEL); + if (!sysrq) + return -ENOMEM; + + INIT_WORK(&sysrq->reinject_work, sysrq_reinject_alt_sysrq); + + sysrq->handle.dev = dev; + sysrq->handle.handler = handler; + sysrq->handle.name = "sysrq"; + sysrq->handle.private = sysrq; + timer_setup(&sysrq->keyreset_timer, sysrq_do_reset, 0); + + error = input_register_handle(&sysrq->handle); + if (error) { + pr_err("Failed to register input sysrq handler, error %d\n", + error); + goto err_free; + } + + error = input_open_device(&sysrq->handle); + if (error) { + pr_err("Failed to open input device, error %d\n", error); + goto err_unregister; + } + + return 0; + + err_unregister: + input_unregister_handle(&sysrq->handle); + err_free: + kfree(sysrq); + return error; +} + +static void sysrq_disconnect(struct input_handle *handle) +{ + struct sysrq_state *sysrq = handle->private; + + input_close_device(handle); + cancel_work_sync(&sysrq->reinject_work); + del_timer_sync(&sysrq->keyreset_timer); + input_unregister_handle(handle); + kfree(sysrq); +} + +/* + * We are matching on KEY_LEFTALT instead of KEY_SYSRQ because not all + * keyboards have SysRq key predefined and so user may add it to keymap + * later, but we expect all such keyboards to have left alt. + */ +static const struct input_device_id sysrq_ids[] = { + { + .flags = INPUT_DEVICE_ID_MATCH_EVBIT | + INPUT_DEVICE_ID_MATCH_KEYBIT, + .evbit = { [BIT_WORD(EV_KEY)] = BIT_MASK(EV_KEY) }, + .keybit = { [BIT_WORD(KEY_LEFTALT)] = BIT_MASK(KEY_LEFTALT) }, + }, + { }, +}; + +static struct input_handler sysrq_handler = { + .filter = sysrq_filter, + .connect = sysrq_connect, + .disconnect = sysrq_disconnect, + .name = "sysrq", + .id_table = sysrq_ids, +}; + +static inline void sysrq_register_handler(void) +{ + int error; + + sysrq_of_get_keyreset_config(); + + error = input_register_handler(&sysrq_handler); + if (error) + pr_err("Failed to register input handler, error %d", error); +} + +static inline void sysrq_unregister_handler(void) +{ + input_unregister_handler(&sysrq_handler); +} + +static int sysrq_reset_seq_param_set(const char *buffer, + const struct kernel_param *kp) +{ + unsigned long val; + int error; + + error = kstrtoul(buffer, 0, &val); + if (error < 0) + return error; + + if (val > KEY_MAX) + return -EINVAL; + + *((unsigned short *)kp->arg) = val; + sysrq_reset_seq_version++; + + return 0; +} + +static const struct kernel_param_ops param_ops_sysrq_reset_seq = { + .get = param_get_ushort, + .set = sysrq_reset_seq_param_set, +}; + +#define param_check_sysrq_reset_seq(name, p) \ + __param_check(name, p, unsigned short) + +/* + * not really modular, but the easiest way to keep compat with existing + * bootargs behaviour is to continue using module_param here. + */ +module_param_array_named(reset_seq, sysrq_reset_seq, sysrq_reset_seq, + &sysrq_reset_seq_len, 0644); + +module_param_named(sysrq_downtime_ms, sysrq_reset_downtime_ms, int, 0644); + +#else + +static inline void sysrq_register_handler(void) +{ +} + +static inline void sysrq_unregister_handler(void) +{ +} + +#endif /* CONFIG_INPUT */ + +int sysrq_toggle_support(int enable_mask) +{ + bool was_enabled = sysrq_on(); + + sysrq_enabled = enable_mask; + + if (was_enabled != sysrq_on()) { + if (sysrq_on()) + sysrq_register_handler(); + else + sysrq_unregister_handler(); + } + + return 0; +} +EXPORT_SYMBOL_GPL(sysrq_toggle_support); + +static int __sysrq_swap_key_ops(int key, const struct sysrq_key_op *insert_op_p, + const struct sysrq_key_op *remove_op_p) +{ + int retval; + + spin_lock(&sysrq_key_table_lock); + if (__sysrq_get_key_op(key) == remove_op_p) { + __sysrq_put_key_op(key, insert_op_p); + retval = 0; + } else { + retval = -1; + } + spin_unlock(&sysrq_key_table_lock); + + /* + * A concurrent __handle_sysrq either got the old op or the new op. + * Wait for it to go away before returning, so the code for an old + * op is not freed (eg. on module unload) while it is in use. + */ + synchronize_rcu(); + + return retval; +} + +int register_sysrq_key(int key, const struct sysrq_key_op *op_p) +{ + return __sysrq_swap_key_ops(key, op_p, NULL); +} +EXPORT_SYMBOL(register_sysrq_key); + +int unregister_sysrq_key(int key, const struct sysrq_key_op *op_p) +{ + return __sysrq_swap_key_ops(key, NULL, op_p); +} +EXPORT_SYMBOL(unregister_sysrq_key); + +#ifdef CONFIG_PROC_FS +/* + * writing 'C' to /proc/sysrq-trigger is like sysrq-C + */ +static ssize_t write_sysrq_trigger(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + if (count) { + char c; + + if (get_user(c, buf)) + return -EFAULT; + __handle_sysrq(c, false); + } + + return count; +} + +static const struct proc_ops sysrq_trigger_proc_ops = { + .proc_write = write_sysrq_trigger, + .proc_lseek = noop_llseek, +}; + +static void sysrq_init_procfs(void) +{ + if (!proc_create("sysrq-trigger", S_IWUSR, NULL, + &sysrq_trigger_proc_ops)) + pr_err("Failed to register proc interface\n"); +} + +#else + +static inline void sysrq_init_procfs(void) +{ +} + +#endif /* CONFIG_PROC_FS */ + +static int __init sysrq_init(void) +{ + sysrq_init_procfs(); + + if (sysrq_on()) + sysrq_register_handler(); + + return 0; +} +device_initcall(sysrq_init); diff --git a/drivers/tty/tty.h b/drivers/tty/tty.h new file mode 100644 index 000000000..3d2d82ff6 --- /dev/null +++ b/drivers/tty/tty.h @@ -0,0 +1,117 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * TTY core internal functions + */ + +#ifndef _TTY_INTERNAL_H +#define _TTY_INTERNAL_H + +#define tty_msg(fn, tty, f, ...) \ + fn("%s %s: " f, tty_driver_name(tty), tty_name(tty), ##__VA_ARGS__) + +#define tty_debug(tty, f, ...) tty_msg(pr_debug, tty, f, ##__VA_ARGS__) +#define tty_info(tty, f, ...) tty_msg(pr_info, tty, f, ##__VA_ARGS__) +#define tty_notice(tty, f, ...) tty_msg(pr_notice, tty, f, ##__VA_ARGS__) +#define tty_warn(tty, f, ...) tty_msg(pr_warn, tty, f, ##__VA_ARGS__) +#define tty_err(tty, f, ...) tty_msg(pr_err, tty, f, ##__VA_ARGS__) + +#define tty_info_ratelimited(tty, f, ...) \ + tty_msg(pr_info_ratelimited, tty, f, ##__VA_ARGS__) + +/* + * Lock subclasses for tty locks + * + * TTY_LOCK_NORMAL is for normal ttys and master ptys. + * TTY_LOCK_SLAVE is for slave ptys only. + * + * Lock subclasses are necessary for handling nested locking with pty pairs. + * tty locks which use nested locking: + * + * legacy_mutex - Nested tty locks are necessary for releasing pty pairs. + * The stable lock order is master pty first, then slave pty. + * termios_rwsem - The stable lock order is tty_buffer lock->termios_rwsem. + * Subclassing this lock enables the slave pty to hold its + * termios_rwsem when claiming the master tty_buffer lock. + * tty_buffer lock - slave ptys can claim nested buffer lock when handling + * signal chars. The stable lock order is slave pty, then + * master. + */ +enum { + TTY_LOCK_NORMAL = 0, + TTY_LOCK_SLAVE, +}; + +/* Values for tty->flow_change */ +#define TTY_THROTTLE_SAFE 1 +#define TTY_UNTHROTTLE_SAFE 2 + +static inline void __tty_set_flow_change(struct tty_struct *tty, int val) +{ + tty->flow_change = val; +} + +static inline void tty_set_flow_change(struct tty_struct *tty, int val) +{ + tty->flow_change = val; + smp_mb(); +} + +int tty_ldisc_lock(struct tty_struct *tty, unsigned long timeout); +void tty_ldisc_unlock(struct tty_struct *tty); + +int __tty_check_change(struct tty_struct *tty, int sig); +int tty_check_change(struct tty_struct *tty); +void __stop_tty(struct tty_struct *tty); +void __start_tty(struct tty_struct *tty); +void tty_write_unlock(struct tty_struct *tty); +int tty_write_lock(struct tty_struct *tty, bool ndelay); +void tty_vhangup_session(struct tty_struct *tty); +void tty_open_proc_set_tty(struct file *filp, struct tty_struct *tty); +int tty_signal_session_leader(struct tty_struct *tty, int exit_session); +void session_clear_tty(struct pid *session); +void tty_buffer_free_all(struct tty_port *port); +void tty_buffer_flush(struct tty_struct *tty, struct tty_ldisc *ld); +void tty_buffer_init(struct tty_port *port); +void tty_buffer_set_lock_subclass(struct tty_port *port); +bool tty_buffer_restart_work(struct tty_port *port); +bool tty_buffer_cancel_work(struct tty_port *port); +void tty_buffer_flush_work(struct tty_port *port); +speed_t tty_termios_input_baud_rate(struct ktermios *termios); +void tty_ldisc_hangup(struct tty_struct *tty, bool reset); +int tty_ldisc_reinit(struct tty_struct *tty, int disc); +long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg); +long tty_jobctrl_ioctl(struct tty_struct *tty, struct tty_struct *real_tty, + struct file *file, unsigned int cmd, unsigned long arg); +void tty_default_fops(struct file_operations *fops); +struct tty_struct *alloc_tty_struct(struct tty_driver *driver, int idx); +int tty_alloc_file(struct file *file); +void tty_add_file(struct tty_struct *tty, struct file *file); +void tty_free_file(struct file *file); +int tty_release(struct inode *inode, struct file *filp); + +#define tty_is_writelocked(tty) (mutex_is_locked(&tty->atomic_write_lock)) + +int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty); +void tty_ldisc_release(struct tty_struct *tty); +int __must_check tty_ldisc_init(struct tty_struct *tty); +void tty_ldisc_deinit(struct tty_struct *tty); + +void tty_sysctl_init(void); + +/* tty_audit.c */ +#ifdef CONFIG_AUDIT +void tty_audit_add_data(struct tty_struct *tty, const void *data, size_t size); +void tty_audit_tiocsti(struct tty_struct *tty, char ch); +#else +static inline void tty_audit_add_data(struct tty_struct *tty, const void *data, + size_t size) +{ +} +static inline void tty_audit_tiocsti(struct tty_struct *tty, char ch) +{ +} +#endif + +ssize_t redirected_tty_write(struct kiocb *, struct iov_iter *); + +#endif diff --git a/drivers/tty/tty_audit.c b/drivers/tty/tty_audit.c new file mode 100644 index 000000000..9b30edee7 --- /dev/null +++ b/drivers/tty/tty_audit.c @@ -0,0 +1,248 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Creating audit events from TTY input. + * + * Copyright (C) 2007 Red Hat, Inc. All rights reserved. + * + * Authors: Miloslav Trmac + */ + +#include +#include +#include +#include "tty.h" + +struct tty_audit_buf { + struct mutex mutex; /* Protects all data below */ + dev_t dev; /* The TTY which the data is from */ + unsigned icanon:1; + size_t valid; + unsigned char *data; /* Allocated size N_TTY_BUF_SIZE */ +}; + +static struct tty_audit_buf *tty_audit_buf_ref(void) +{ + struct tty_audit_buf *buf; + + buf = current->signal->tty_audit_buf; + WARN_ON(buf == ERR_PTR(-ESRCH)); + return buf; +} + +static struct tty_audit_buf *tty_audit_buf_alloc(void) +{ + struct tty_audit_buf *buf; + + buf = kmalloc(sizeof(*buf), GFP_KERNEL); + if (!buf) + goto err; + buf->data = kmalloc(N_TTY_BUF_SIZE, GFP_KERNEL); + if (!buf->data) + goto err_buf; + mutex_init(&buf->mutex); + buf->dev = MKDEV(0, 0); + buf->icanon = 0; + buf->valid = 0; + return buf; + +err_buf: + kfree(buf); +err: + return NULL; +} + +static void tty_audit_buf_free(struct tty_audit_buf *buf) +{ + WARN_ON(buf->valid != 0); + kfree(buf->data); + kfree(buf); +} + +static void tty_audit_log(const char *description, dev_t dev, + unsigned char *data, size_t size) +{ + struct audit_buffer *ab; + pid_t pid = task_pid_nr(current); + uid_t uid = from_kuid(&init_user_ns, task_uid(current)); + uid_t loginuid = from_kuid(&init_user_ns, audit_get_loginuid(current)); + unsigned int sessionid = audit_get_sessionid(current); + + ab = audit_log_start(audit_context(), GFP_KERNEL, AUDIT_TTY); + if (ab) { + char name[sizeof(current->comm)]; + + audit_log_format(ab, "%s pid=%u uid=%u auid=%u ses=%u major=%d" + " minor=%d comm=", description, pid, uid, + loginuid, sessionid, MAJOR(dev), MINOR(dev)); + get_task_comm(name, current); + audit_log_untrustedstring(ab, name); + audit_log_format(ab, " data="); + audit_log_n_hex(ab, data, size); + audit_log_end(ab); + } +} + +/** + * tty_audit_buf_push - Push buffered data out + * + * Generate an audit message from the contents of @buf, which is owned by + * the current task. @buf->mutex must be locked. + */ +static void tty_audit_buf_push(struct tty_audit_buf *buf) +{ + if (buf->valid == 0) + return; + if (audit_enabled == AUDIT_OFF) { + buf->valid = 0; + return; + } + tty_audit_log("tty", buf->dev, buf->data, buf->valid); + buf->valid = 0; +} + +/** + * tty_audit_exit - Handle a task exit + * + * Make sure all buffered data is written out and deallocate the buffer. + * Only needs to be called if current->signal->tty_audit_buf != %NULL. + * + * The process is single-threaded at this point; no other threads share + * current->signal. + */ +void tty_audit_exit(void) +{ + struct tty_audit_buf *buf; + + buf = xchg(¤t->signal->tty_audit_buf, ERR_PTR(-ESRCH)); + if (!buf) + return; + + tty_audit_buf_push(buf); + tty_audit_buf_free(buf); +} + +/** + * tty_audit_fork - Copy TTY audit state for a new task + * + * Set up TTY audit state in @sig from current. @sig needs no locking. + */ +void tty_audit_fork(struct signal_struct *sig) +{ + sig->audit_tty = current->signal->audit_tty; +} + +/** + * tty_audit_tiocsti - Log TIOCSTI + */ +void tty_audit_tiocsti(struct tty_struct *tty, char ch) +{ + dev_t dev; + + dev = MKDEV(tty->driver->major, tty->driver->minor_start) + tty->index; + if (tty_audit_push()) + return; + + if (audit_enabled) + tty_audit_log("ioctl=TIOCSTI", dev, &ch, 1); +} + +/** + * tty_audit_push - Flush current's pending audit data + * + * Returns 0 if success, -EPERM if tty audit is disabled + */ +int tty_audit_push(void) +{ + struct tty_audit_buf *buf; + + if (~current->signal->audit_tty & AUDIT_TTY_ENABLE) + return -EPERM; + + buf = tty_audit_buf_ref(); + if (!IS_ERR_OR_NULL(buf)) { + mutex_lock(&buf->mutex); + tty_audit_buf_push(buf); + mutex_unlock(&buf->mutex); + } + return 0; +} + +/** + * tty_audit_buf_get - Get an audit buffer. + * + * Get an audit buffer, allocate it if necessary. Return %NULL + * if out of memory or ERR_PTR(-ESRCH) if tty_audit_exit() has already + * occurred. Otherwise, return a new reference to the buffer. + */ +static struct tty_audit_buf *tty_audit_buf_get(void) +{ + struct tty_audit_buf *buf; + + buf = tty_audit_buf_ref(); + if (buf) + return buf; + + buf = tty_audit_buf_alloc(); + if (buf == NULL) { + audit_log_lost("out of memory in TTY auditing"); + return NULL; + } + + /* Race to use this buffer, free it if another wins */ + if (cmpxchg(¤t->signal->tty_audit_buf, NULL, buf) != NULL) + tty_audit_buf_free(buf); + return tty_audit_buf_ref(); +} + +/** + * tty_audit_add_data - Add data for TTY auditing. + * + * Audit @data of @size from @tty, if necessary. + */ +void tty_audit_add_data(struct tty_struct *tty, const void *data, size_t size) +{ + struct tty_audit_buf *buf; + unsigned int icanon = !!L_ICANON(tty); + unsigned int audit_tty; + dev_t dev; + + audit_tty = READ_ONCE(current->signal->audit_tty); + if (~audit_tty & AUDIT_TTY_ENABLE) + return; + + if (unlikely(size == 0)) + return; + + if (tty->driver->type == TTY_DRIVER_TYPE_PTY + && tty->driver->subtype == PTY_TYPE_MASTER) + return; + + if ((~audit_tty & AUDIT_TTY_LOG_PASSWD) && icanon && !L_ECHO(tty)) + return; + + buf = tty_audit_buf_get(); + if (IS_ERR_OR_NULL(buf)) + return; + + mutex_lock(&buf->mutex); + dev = MKDEV(tty->driver->major, tty->driver->minor_start) + tty->index; + if (buf->dev != dev || buf->icanon != icanon) { + tty_audit_buf_push(buf); + buf->dev = dev; + buf->icanon = icanon; + } + do { + size_t run; + + run = N_TTY_BUF_SIZE - buf->valid; + if (run > size) + run = size; + memcpy(buf->data + buf->valid, data, run); + buf->valid += run; + data += run; + size -= run; + if (buf->valid == N_TTY_BUF_SIZE) + tty_audit_buf_push(buf); + } while (size != 0); + mutex_unlock(&buf->mutex); +} diff --git a/drivers/tty/tty_baudrate.c b/drivers/tty/tty_baudrate.c new file mode 100644 index 000000000..9d0093d84 --- /dev/null +++ b/drivers/tty/tty_baudrate.c @@ -0,0 +1,238 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds + */ + +#include +#include +#include +#include +#include +#include "tty.h" + + +/* + * Routine which returns the baud rate of the tty + * + * Note that the baud_table needs to be kept in sync with the + * include/asm/termbits.h file. + */ +static const speed_t baud_table[] = { + 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, + 4800, 9600, 19200, 38400, 57600, 115200, 230400, 460800, +#ifdef __sparc__ + 76800, 153600, 307200, 614400, 921600, 500000, 576000, + 1000000, 1152000, 1500000, 2000000 +#else + 500000, 576000, 921600, 1000000, 1152000, 1500000, 2000000, + 2500000, 3000000, 3500000, 4000000 +#endif +}; + +static const tcflag_t baud_bits[] = { + B0, B50, B75, B110, B134, B150, B200, B300, B600, B1200, B1800, B2400, + B4800, B9600, B19200, B38400, B57600, B115200, B230400, B460800, +#ifdef __sparc__ + B76800, B153600, B307200, B614400, B921600, B500000, B576000, + B1000000, B1152000, B1500000, B2000000 +#else + B500000, B576000, B921600, B1000000, B1152000, B1500000, B2000000, + B2500000, B3000000, B3500000, B4000000 +#endif +}; + +static int n_baud_table = ARRAY_SIZE(baud_table); + +/** + * tty_termios_baud_rate + * @termios: termios structure + * + * Convert termios baud rate data into a speed. This should be called + * with the termios lock held if this termios is a terminal termios + * structure. May change the termios data. Device drivers can call this + * function but should use ->c_[io]speed directly as they are updated. + * + * Locking: none + */ + +speed_t tty_termios_baud_rate(struct ktermios *termios) +{ + unsigned int cbaud; + + cbaud = termios->c_cflag & CBAUD; + +#ifdef BOTHER + /* Magic token for arbitrary speed via c_ispeed/c_ospeed */ + if (cbaud == BOTHER) + return termios->c_ospeed; +#endif + if (cbaud & CBAUDEX) { + cbaud &= ~CBAUDEX; + + if (cbaud < 1 || cbaud + 15 > n_baud_table) + termios->c_cflag &= ~CBAUDEX; + else + cbaud += 15; + } + return cbaud >= n_baud_table ? 0 : baud_table[cbaud]; +} +EXPORT_SYMBOL(tty_termios_baud_rate); + +/** + * tty_termios_input_baud_rate + * @termios: termios structure + * + * Convert termios baud rate data into a speed. This should be called + * with the termios lock held if this termios is a terminal termios + * structure. May change the termios data. Device drivers can call this + * function but should use ->c_[io]speed directly as they are updated. + * + * Locking: none + */ + +speed_t tty_termios_input_baud_rate(struct ktermios *termios) +{ +#ifdef IBSHIFT + unsigned int cbaud = (termios->c_cflag >> IBSHIFT) & CBAUD; + + if (cbaud == B0) + return tty_termios_baud_rate(termios); +#ifdef BOTHER + /* Magic token for arbitrary speed via c_ispeed*/ + if (cbaud == BOTHER) + return termios->c_ispeed; +#endif + if (cbaud & CBAUDEX) { + cbaud &= ~CBAUDEX; + + if (cbaud < 1 || cbaud + 15 > n_baud_table) + termios->c_cflag &= ~(CBAUDEX << IBSHIFT); + else + cbaud += 15; + } + return cbaud >= n_baud_table ? 0 : baud_table[cbaud]; +#else /* IBSHIFT */ + return tty_termios_baud_rate(termios); +#endif /* IBSHIFT */ +} +EXPORT_SYMBOL(tty_termios_input_baud_rate); + +/** + * tty_termios_encode_baud_rate + * @termios: ktermios structure holding user requested state + * @ibaud: input speed + * @obaud: output speed + * + * Encode the speeds set into the passed termios structure. This is + * used as a library helper for drivers so that they can report back + * the actual speed selected when it differs from the speed requested + * + * For maximal back compatibility with legacy SYS5/POSIX *nix behaviour + * we need to carefully set the bits when the user does not get the + * desired speed. We allow small margins and preserve as much of possible + * of the input intent to keep compatibility. + * + * Locking: Caller should hold termios lock. This is already held + * when calling this function from the driver termios handler. + * + * The ifdefs deal with platforms whose owners have yet to update them + * and will all go away once this is done. + */ + +void tty_termios_encode_baud_rate(struct ktermios *termios, + speed_t ibaud, speed_t obaud) +{ + int i = 0; + int ifound = -1, ofound = -1; + int iclose = ibaud/50, oclose = obaud/50; + int ibinput = 0; + + if (obaud == 0) /* CD dropped */ + ibaud = 0; /* Clear ibaud to be sure */ + + termios->c_ispeed = ibaud; + termios->c_ospeed = obaud; + +#ifdef IBSHIFT + if ((termios->c_cflag >> IBSHIFT) & CBAUD) + ibinput = 1; /* An input speed was specified */ +#endif +#ifdef BOTHER + /* If the user asked for a precise weird speed give a precise weird + answer. If they asked for a Bfoo speed they may have problems + digesting non-exact replies so fuzz a bit */ + + if ((termios->c_cflag & CBAUD) == BOTHER) { + oclose = 0; + if (!ibinput) + iclose = 0; + } + if (((termios->c_cflag >> IBSHIFT) & CBAUD) == BOTHER) + iclose = 0; +#endif + termios->c_cflag &= ~CBAUD; +#ifdef IBSHIFT + termios->c_cflag &= ~(CBAUD << IBSHIFT); +#endif + + /* + * Our goal is to find a close match to the standard baud rate + * returned. Walk the baud rate table and if we get a very close + * match then report back the speed as a POSIX Bxxxx value by + * preference + */ + + do { + if (obaud - oclose <= baud_table[i] && + obaud + oclose >= baud_table[i]) { + termios->c_cflag |= baud_bits[i]; + ofound = i; + } + if (ibaud - iclose <= baud_table[i] && + ibaud + iclose >= baud_table[i]) { + /* For the case input == output don't set IBAUD bits + if the user didn't do so */ + if (ofound == i && !ibinput) + ifound = i; +#ifdef IBSHIFT + else { + ifound = i; + termios->c_cflag |= (baud_bits[i] << IBSHIFT); + } +#endif + } + } while (++i < n_baud_table); + + /* + * If we found no match then use BOTHER if provided or warn + * the user their platform maintainer needs to wake up if not. + */ +#ifdef BOTHER + if (ofound == -1) + termios->c_cflag |= BOTHER; + /* Set exact input bits only if the input and output differ or the + user already did */ + if (ifound == -1 && (ibaud != obaud || ibinput)) + termios->c_cflag |= (BOTHER << IBSHIFT); +#else + if (ifound == -1 || ofound == -1) + pr_warn_once("tty: Unable to return correct speed data as your architecture needs updating.\n"); +#endif +} +EXPORT_SYMBOL_GPL(tty_termios_encode_baud_rate); + +/** + * tty_encode_baud_rate - set baud rate of the tty + * @ibaud: input baud rate + * @obaud: output baud rate + * + * Update the current termios data for the tty with the new speed + * settings. The caller must hold the termios_rwsem for the tty in + * question. + */ + +void tty_encode_baud_rate(struct tty_struct *tty, speed_t ibaud, speed_t obaud) +{ + tty_termios_encode_baud_rate(&tty->termios, ibaud, obaud); +} +EXPORT_SYMBOL_GPL(tty_encode_baud_rate); diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c new file mode 100644 index 000000000..9f2379815 --- /dev/null +++ b/drivers/tty/tty_buffer.c @@ -0,0 +1,645 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Tty buffer allocation management + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "tty.h" + +#define MIN_TTYB_SIZE 256 +#define TTYB_ALIGN_MASK 255 + +/* + * Byte threshold to limit memory consumption for flip buffers. + * The actual memory limit is > 2x this amount. + */ +#define TTYB_DEFAULT_MEM_LIMIT (640 * 1024UL) + +/* + * We default to dicing tty buffer allocations to this many characters + * in order to avoid multiple page allocations. We know the size of + * tty_buffer itself but it must also be taken into account that the + * the buffer is 256 byte aligned. See tty_buffer_find for the allocation + * logic this must match + */ + +#define TTY_BUFFER_PAGE (((PAGE_SIZE - sizeof(struct tty_buffer)) / 2) & ~0xFF) + +/** + * tty_buffer_lock_exclusive - gain exclusive access to buffer + * tty_buffer_unlock_exclusive - release exclusive access + * + * @port: tty port owning the flip buffer + * + * Guarantees safe use of the line discipline's receive_buf() method by + * excluding the buffer work and any pending flush from using the flip + * buffer. Data can continue to be added concurrently to the flip buffer + * from the driver side. + * + * On release, the buffer work is restarted if there is data in the + * flip buffer + */ + +void tty_buffer_lock_exclusive(struct tty_port *port) +{ + struct tty_bufhead *buf = &port->buf; + + atomic_inc(&buf->priority); + mutex_lock(&buf->lock); +} +EXPORT_SYMBOL_GPL(tty_buffer_lock_exclusive); + +void tty_buffer_unlock_exclusive(struct tty_port *port) +{ + struct tty_bufhead *buf = &port->buf; + int restart; + + restart = buf->head->commit != buf->head->read; + + atomic_dec(&buf->priority); + mutex_unlock(&buf->lock); + if (restart) + queue_work(system_unbound_wq, &buf->work); +} +EXPORT_SYMBOL_GPL(tty_buffer_unlock_exclusive); + +/** + * tty_buffer_space_avail - return unused buffer space + * @port: tty port owning the flip buffer + * + * Returns the # of bytes which can be written by the driver without + * reaching the buffer limit. + * + * Note: this does not guarantee that memory is available to write + * the returned # of bytes (use tty_prepare_flip_string_xxx() to + * pre-allocate if memory guarantee is required). + */ + +int tty_buffer_space_avail(struct tty_port *port) +{ + int space = port->buf.mem_limit - atomic_read(&port->buf.mem_used); + return max(space, 0); +} +EXPORT_SYMBOL_GPL(tty_buffer_space_avail); + +static void tty_buffer_reset(struct tty_buffer *p, size_t size) +{ + p->used = 0; + p->size = size; + p->next = NULL; + p->commit = 0; + p->read = 0; + p->flags = 0; +} + +/** + * tty_buffer_free_all - free buffers used by a tty + * @port: tty port to free from + * + * Remove all the buffers pending on a tty whether queued with data + * or in the free ring. Must be called when the tty is no longer in use + */ + +void tty_buffer_free_all(struct tty_port *port) +{ + struct tty_bufhead *buf = &port->buf; + struct tty_buffer *p, *next; + struct llist_node *llist; + unsigned int freed = 0; + int still_used; + + while ((p = buf->head) != NULL) { + buf->head = p->next; + freed += p->size; + if (p->size > 0) + kfree(p); + } + llist = llist_del_all(&buf->free); + llist_for_each_entry_safe(p, next, llist, free) + kfree(p); + + tty_buffer_reset(&buf->sentinel, 0); + buf->head = &buf->sentinel; + buf->tail = &buf->sentinel; + + still_used = atomic_xchg(&buf->mem_used, 0); + WARN(still_used != freed, "we still have not freed %d bytes!", + still_used - freed); +} + +/** + * tty_buffer_alloc - allocate a tty buffer + * @port: tty port + * @size: desired size (characters) + * + * Allocate a new tty buffer to hold the desired number of characters. + * We round our buffers off in 256 character chunks to get better + * allocation behaviour. + * Return NULL if out of memory or the allocation would exceed the + * per device queue + */ + +static struct tty_buffer *tty_buffer_alloc(struct tty_port *port, size_t size) +{ + struct llist_node *free; + struct tty_buffer *p; + + /* Round the buffer size out */ + size = __ALIGN_MASK(size, TTYB_ALIGN_MASK); + + if (size <= MIN_TTYB_SIZE) { + free = llist_del_first(&port->buf.free); + if (free) { + p = llist_entry(free, struct tty_buffer, free); + goto found; + } + } + + /* Should possibly check if this fails for the largest buffer we + have queued and recycle that ? */ + if (atomic_read(&port->buf.mem_used) > port->buf.mem_limit) + return NULL; + p = kmalloc(sizeof(struct tty_buffer) + 2 * size, + GFP_ATOMIC | __GFP_NOWARN); + if (p == NULL) + return NULL; + +found: + tty_buffer_reset(p, size); + atomic_add(size, &port->buf.mem_used); + return p; +} + +/** + * tty_buffer_free - free a tty buffer + * @port: tty port owning the buffer + * @b: the buffer to free + * + * Free a tty buffer, or add it to the free list according to our + * internal strategy + */ + +static void tty_buffer_free(struct tty_port *port, struct tty_buffer *b) +{ + struct tty_bufhead *buf = &port->buf; + + /* Dumb strategy for now - should keep some stats */ + WARN_ON(atomic_sub_return(b->size, &buf->mem_used) < 0); + + if (b->size > MIN_TTYB_SIZE) + kfree(b); + else if (b->size > 0) + llist_add(&b->free, &buf->free); +} + +/** + * tty_buffer_flush - flush full tty buffers + * @tty: tty to flush + * @ld: optional ldisc ptr (must be referenced) + * + * flush all the buffers containing receive data. If ld != NULL, + * flush the ldisc input buffer. + * + * Locking: takes buffer lock to ensure single-threaded flip buffer + * 'consumer' + */ + +void tty_buffer_flush(struct tty_struct *tty, struct tty_ldisc *ld) +{ + struct tty_port *port = tty->port; + struct tty_bufhead *buf = &port->buf; + struct tty_buffer *next; + + atomic_inc(&buf->priority); + + mutex_lock(&buf->lock); + /* paired w/ release in __tty_buffer_request_room; ensures there are + * no pending memory accesses to the freed buffer + */ + while ((next = smp_load_acquire(&buf->head->next)) != NULL) { + tty_buffer_free(port, buf->head); + buf->head = next; + } + buf->head->read = buf->head->commit; + + if (ld && ld->ops->flush_buffer) + ld->ops->flush_buffer(tty); + + atomic_dec(&buf->priority); + mutex_unlock(&buf->lock); +} + +/** + * tty_buffer_request_room - grow tty buffer if needed + * @port: tty port + * @size: size desired + * @flags: buffer flags if new buffer allocated (default = 0) + * + * Make at least size bytes of linear space available for the tty + * buffer. If we fail return the size we managed to find. + * + * Will change over to a new buffer if the current buffer is encoded as + * TTY_NORMAL (so has no flags buffer) and the new buffer requires + * a flags buffer. + */ +static int __tty_buffer_request_room(struct tty_port *port, size_t size, + int flags) +{ + struct tty_bufhead *buf = &port->buf; + struct tty_buffer *b, *n; + int left, change; + + b = buf->tail; + if (b->flags & TTYB_NORMAL) + left = 2 * b->size - b->used; + else + left = b->size - b->used; + + change = (b->flags & TTYB_NORMAL) && (~flags & TTYB_NORMAL); + if (change || left < size) { + /* This is the slow path - looking for new buffers to use */ + n = tty_buffer_alloc(port, size); + if (n != NULL) { + n->flags = flags; + buf->tail = n; + /* paired w/ acquire in flush_to_ldisc(); ensures + * flush_to_ldisc() sees buffer data. + */ + smp_store_release(&b->commit, b->used); + /* paired w/ acquire in flush_to_ldisc(); ensures the + * latest commit value can be read before the head is + * advanced to the next buffer + */ + smp_store_release(&b->next, n); + } else if (change) + size = 0; + else + size = left; + } + return size; +} + +int tty_buffer_request_room(struct tty_port *port, size_t size) +{ + return __tty_buffer_request_room(port, size, 0); +} +EXPORT_SYMBOL_GPL(tty_buffer_request_room); + +/** + * tty_insert_flip_string_fixed_flag - Add characters to the tty buffer + * @port: tty port + * @chars: characters + * @flag: flag value for each character + * @size: size + * + * Queue a series of bytes to the tty buffering. All the characters + * passed are marked with the supplied flag. Returns the number added. + */ + +int tty_insert_flip_string_fixed_flag(struct tty_port *port, + const unsigned char *chars, char flag, size_t size) +{ + int copied = 0; + do { + int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE); + int flags = (flag == TTY_NORMAL) ? TTYB_NORMAL : 0; + int space = __tty_buffer_request_room(port, goal, flags); + struct tty_buffer *tb = port->buf.tail; + if (unlikely(space == 0)) + break; + memcpy(char_buf_ptr(tb, tb->used), chars, space); + if (~tb->flags & TTYB_NORMAL) + memset(flag_buf_ptr(tb, tb->used), flag, space); + tb->used += space; + copied += space; + chars += space; + /* There is a small chance that we need to split the data over + several buffers. If this is the case we must loop */ + } while (unlikely(size > copied)); + return copied; +} +EXPORT_SYMBOL(tty_insert_flip_string_fixed_flag); + +/** + * tty_insert_flip_string_flags - Add characters to the tty buffer + * @port: tty port + * @chars: characters + * @flags: flag bytes + * @size: size + * + * Queue a series of bytes to the tty buffering. For each character + * the flags array indicates the status of the character. Returns the + * number added. + */ + +int tty_insert_flip_string_flags(struct tty_port *port, + const unsigned char *chars, const char *flags, size_t size) +{ + int copied = 0; + do { + int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE); + int space = tty_buffer_request_room(port, goal); + struct tty_buffer *tb = port->buf.tail; + if (unlikely(space == 0)) + break; + memcpy(char_buf_ptr(tb, tb->used), chars, space); + memcpy(flag_buf_ptr(tb, tb->used), flags, space); + tb->used += space; + copied += space; + chars += space; + flags += space; + /* There is a small chance that we need to split the data over + several buffers. If this is the case we must loop */ + } while (unlikely(size > copied)); + return copied; +} +EXPORT_SYMBOL(tty_insert_flip_string_flags); + +/** + * __tty_insert_flip_char - Add one character to the tty buffer + * @port: tty port + * @ch: character + * @flag: flag byte + * + * Queue a single byte to the tty buffering, with an optional flag. + * This is the slow path of tty_insert_flip_char. + */ +int __tty_insert_flip_char(struct tty_port *port, unsigned char ch, char flag) +{ + struct tty_buffer *tb; + int flags = (flag == TTY_NORMAL) ? TTYB_NORMAL : 0; + + if (!__tty_buffer_request_room(port, 1, flags)) + return 0; + + tb = port->buf.tail; + if (~tb->flags & TTYB_NORMAL) + *flag_buf_ptr(tb, tb->used) = flag; + *char_buf_ptr(tb, tb->used++) = ch; + + return 1; +} +EXPORT_SYMBOL(__tty_insert_flip_char); + +/** + * tty_prepare_flip_string - make room for characters + * @port: tty port + * @chars: return pointer for character write area + * @size: desired size + * + * Prepare a block of space in the buffer for data. Returns the length + * available and buffer pointer to the space which is now allocated and + * accounted for as ready for normal characters. This is used for drivers + * that need their own block copy routines into the buffer. There is no + * guarantee the buffer is a DMA target! + */ + +int tty_prepare_flip_string(struct tty_port *port, unsigned char **chars, + size_t size) +{ + int space = __tty_buffer_request_room(port, size, TTYB_NORMAL); + if (likely(space)) { + struct tty_buffer *tb = port->buf.tail; + *chars = char_buf_ptr(tb, tb->used); + if (~tb->flags & TTYB_NORMAL) + memset(flag_buf_ptr(tb, tb->used), TTY_NORMAL, space); + tb->used += space; + } + return space; +} +EXPORT_SYMBOL_GPL(tty_prepare_flip_string); + +/** + * tty_ldisc_receive_buf - forward data to line discipline + * @ld: line discipline to process input + * @p: char buffer + * @f: TTY_* flags buffer + * @count: number of bytes to process + * + * Callers other than flush_to_ldisc() need to exclude the kworker + * from concurrent use of the line discipline, see paste_selection(). + * + * Returns the number of bytes processed + */ +int tty_ldisc_receive_buf(struct tty_ldisc *ld, const unsigned char *p, + char *f, int count) +{ + if (ld->ops->receive_buf2) + count = ld->ops->receive_buf2(ld->tty, p, f, count); + else { + count = min_t(int, count, ld->tty->receive_room); + if (count && ld->ops->receive_buf) + ld->ops->receive_buf(ld->tty, p, f, count); + } + return count; +} +EXPORT_SYMBOL_GPL(tty_ldisc_receive_buf); + +static int +receive_buf(struct tty_port *port, struct tty_buffer *head, int count) +{ + unsigned char *p = char_buf_ptr(head, head->read); + char *f = NULL; + int n; + + if (~head->flags & TTYB_NORMAL) + f = flag_buf_ptr(head, head->read); + + n = port->client_ops->receive_buf(port, p, f, count); + if (n > 0) + memset(p, 0, n); + return n; +} + +/** + * flush_to_ldisc + * @work: tty structure passed from work queue. + * + * This routine is called out of the software interrupt to flush data + * from the buffer chain to the line discipline. + * + * The receive_buf method is single threaded for each tty instance. + * + * Locking: takes buffer lock to ensure single-threaded flip buffer + * 'consumer' + */ + +static void flush_to_ldisc(struct work_struct *work) +{ + struct tty_port *port = container_of(work, struct tty_port, buf.work); + struct tty_bufhead *buf = &port->buf; + + mutex_lock(&buf->lock); + + while (1) { + struct tty_buffer *head = buf->head; + struct tty_buffer *next; + int count; + + /* Ldisc or user is trying to gain exclusive access */ + if (atomic_read(&buf->priority)) + break; + + /* paired w/ release in __tty_buffer_request_room(); + * ensures commit value read is not stale if the head + * is advancing to the next buffer + */ + next = smp_load_acquire(&head->next); + /* paired w/ release in __tty_buffer_request_room() or in + * tty_buffer_flush(); ensures we see the committed buffer data + */ + count = smp_load_acquire(&head->commit) - head->read; + if (!count) { + if (next == NULL) + break; + buf->head = next; + tty_buffer_free(port, head); + continue; + } + + count = receive_buf(port, head, count); + if (!count) + break; + head->read += count; + + if (need_resched()) + cond_resched(); + } + + mutex_unlock(&buf->lock); + +} + +static inline void tty_flip_buffer_commit(struct tty_buffer *tail) +{ + /* + * Paired w/ acquire in flush_to_ldisc(); ensures flush_to_ldisc() sees + * buffer data. + */ + smp_store_release(&tail->commit, tail->used); +} + +/** + * tty_flip_buffer_push - terminal + * @port: tty port to push + * + * Queue a push of the terminal flip buffers to the line discipline. + * Can be called from IRQ/atomic context. + * + * In the event of the queue being busy for flipping the work will be + * held off and retried later. + */ + +void tty_flip_buffer_push(struct tty_port *port) +{ + struct tty_bufhead *buf = &port->buf; + + tty_flip_buffer_commit(buf->tail); + queue_work(system_unbound_wq, &buf->work); +} +EXPORT_SYMBOL(tty_flip_buffer_push); + +/** + * tty_insert_flip_string_and_push_buffer - add characters to the tty buffer and + * push + * @port: tty port + * @chars: characters + * @size: size + * + * The function combines tty_insert_flip_string() and tty_flip_buffer_push() + * with the exception of properly holding the @port->lock. + * + * To be used only internally (by pty currently). + * + * Returns: the number added. + */ +int tty_insert_flip_string_and_push_buffer(struct tty_port *port, + const unsigned char *chars, size_t size) +{ + struct tty_bufhead *buf = &port->buf; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + size = tty_insert_flip_string(port, chars, size); + if (size) + tty_flip_buffer_commit(buf->tail); + spin_unlock_irqrestore(&port->lock, flags); + + queue_work(system_unbound_wq, &buf->work); + + return size; +} + +/** + * tty_buffer_init - prepare a tty buffer structure + * @port: tty port to initialise + * + * Set up the initial state of the buffer management for a tty device. + * Must be called before the other tty buffer functions are used. + */ + +void tty_buffer_init(struct tty_port *port) +{ + struct tty_bufhead *buf = &port->buf; + + mutex_init(&buf->lock); + tty_buffer_reset(&buf->sentinel, 0); + buf->head = &buf->sentinel; + buf->tail = &buf->sentinel; + init_llist_head(&buf->free); + atomic_set(&buf->mem_used, 0); + atomic_set(&buf->priority, 0); + INIT_WORK(&buf->work, flush_to_ldisc); + buf->mem_limit = TTYB_DEFAULT_MEM_LIMIT; +} + +/** + * tty_buffer_set_limit - change the tty buffer memory limit + * @port: tty port to change + * + * Change the tty buffer memory limit. + * Must be called before the other tty buffer functions are used. + */ + +int tty_buffer_set_limit(struct tty_port *port, int limit) +{ + if (limit < MIN_TTYB_SIZE) + return -EINVAL; + port->buf.mem_limit = limit; + return 0; +} +EXPORT_SYMBOL_GPL(tty_buffer_set_limit); + +/* slave ptys can claim nested buffer lock when handling BRK and INTR */ +void tty_buffer_set_lock_subclass(struct tty_port *port) +{ + lockdep_set_subclass(&port->buf.lock, TTY_LOCK_SLAVE); +} + +bool tty_buffer_restart_work(struct tty_port *port) +{ + return queue_work(system_unbound_wq, &port->buf.work); +} + +bool tty_buffer_cancel_work(struct tty_port *port) +{ + return cancel_work_sync(&port->buf.work); +} + +void tty_buffer_flush_work(struct tty_port *port) +{ + flush_work(&port->buf.work); +} diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c new file mode 100644 index 000000000..984e3098e --- /dev/null +++ b/drivers/tty/tty_io.c @@ -0,0 +1,3608 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 1991, 1992 Linus Torvalds + */ + +/* + * 'tty_io.c' gives an orthogonal feeling to tty's, be they consoles + * or rs-channels. It also implements echoing, cooked mode etc. + * + * Kill-line thanks to John T Kohl, who also corrected VMIN = VTIME = 0. + * + * Modified by Theodore Ts'o, 9/14/92, to dynamically allocate the + * tty_struct and tty_queue structures. Previously there was an array + * of 256 tty_struct's which was statically allocated, and the + * tty_queue structures were allocated at boot time. Both are now + * dynamically allocated only when the tty is open. + * + * Also restructured routines so that there is more of a separation + * between the high-level tty routines (tty_io.c and tty_ioctl.c) and + * the low-level tty routines (serial.c, pty.c, console.c). This + * makes for cleaner and more compact code. -TYT, 9/17/92 + * + * Modified by Fred N. van Kempen, 01/29/93, to add line disciplines + * which can be dynamically activated and de-activated by the line + * discipline handling modules (like SLIP). + * + * NOTE: pay no attention to the line discipline code (yet); its + * interface is still subject to change in this version... + * -- TYT, 1/31/92 + * + * Added functionality to the OPOST tty handling. No delays, but all + * other bits should be there. + * -- Nick Holloway , 27th May 1993. + * + * Rewrote canonical mode and added more termios flags. + * -- julian@uhunix.uhcc.hawaii.edu (J. Cowley), 13Jan94 + * + * Reorganized FASYNC support so mouse code can share it. + * -- ctm@ardi.com, 9Sep95 + * + * New TIOCLINUX variants added. + * -- mj@k332.feld.cvut.cz, 19-Nov-95 + * + * Restrict vt switching via ioctl() + * -- grif@cs.ucr.edu, 5-Dec-95 + * + * Move console and virtual terminal code to more appropriate files, + * implement CONFIG_VT and generalize console device interface. + * -- Marko Kohtala , March 97 + * + * Rewrote tty_init_dev and tty_release_dev to eliminate races. + * -- Bill Hawes , June 97 + * + * Added devfs support. + * -- C. Scott Ananian , 13-Jan-1998 + * + * Added support for a Unix98-style ptmx device. + * -- C. Scott Ananian , 14-Jan-1998 + * + * Reduced memory usage for older ARM systems + * -- Russell King + * + * Move do_SAK() into process context. Less stack use in devfs functions. + * alloc_tty_struct() always uses kmalloc() + * -- Andrew Morton 17Mar01 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include + +#include +#include +#include "tty.h" + +#undef TTY_DEBUG_HANGUP +#ifdef TTY_DEBUG_HANGUP +# define tty_debug_hangup(tty, f, args...) tty_debug(tty, f, ##args) +#else +# define tty_debug_hangup(tty, f, args...) do { } while (0) +#endif + +#define TTY_PARANOIA_CHECK 1 +#define CHECK_TTY_COUNT 1 + +struct ktermios tty_std_termios = { /* for the benefit of tty drivers */ + .c_iflag = ICRNL | IXON, + .c_oflag = OPOST | ONLCR, + .c_cflag = B38400 | CS8 | CREAD | HUPCL, + .c_lflag = ISIG | ICANON | ECHO | ECHOE | ECHOK | + ECHOCTL | ECHOKE | IEXTEN, + .c_cc = INIT_C_CC, + .c_ispeed = 38400, + .c_ospeed = 38400, + /* .c_line = N_TTY, */ +}; + +EXPORT_SYMBOL(tty_std_termios); + +/* This list gets poked at by procfs and various bits of boot up code. This + could do with some rationalisation such as pulling the tty proc function + into this file */ + +LIST_HEAD(tty_drivers); /* linked list of tty drivers */ + +/* Mutex to protect creating and releasing a tty */ +DEFINE_MUTEX(tty_mutex); + +static ssize_t tty_read(struct kiocb *, struct iov_iter *); +static ssize_t tty_write(struct kiocb *, struct iov_iter *); +static __poll_t tty_poll(struct file *, poll_table *); +static int tty_open(struct inode *, struct file *); +#ifdef CONFIG_COMPAT +static long tty_compat_ioctl(struct file *file, unsigned int cmd, + unsigned long arg); +#else +#define tty_compat_ioctl NULL +#endif +static int __tty_fasync(int fd, struct file *filp, int on); +static int tty_fasync(int fd, struct file *filp, int on); +static void release_tty(struct tty_struct *tty, int idx); + +/** + * free_tty_struct - free a disused tty + * @tty: tty struct to free + * + * Free the write buffers, tty queue and tty memory itself. + * + * Locking: none. Must be called after tty is definitely unused + */ + +static void free_tty_struct(struct tty_struct *tty) +{ + tty_ldisc_deinit(tty); + put_device(tty->dev); + kfree(tty->write_buf); + tty->magic = 0xDEADDEAD; + kfree(tty); +} + +static inline struct tty_struct *file_tty(struct file *file) +{ + return ((struct tty_file_private *)file->private_data)->tty; +} + +int tty_alloc_file(struct file *file) +{ + struct tty_file_private *priv; + + priv = kmalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + file->private_data = priv; + + return 0; +} + +/* Associate a new file with the tty structure */ +void tty_add_file(struct tty_struct *tty, struct file *file) +{ + struct tty_file_private *priv = file->private_data; + + priv->tty = tty; + priv->file = file; + + spin_lock(&tty->files_lock); + list_add(&priv->list, &tty->tty_files); + spin_unlock(&tty->files_lock); +} + +/** + * tty_free_file - free file->private_data + * + * This shall be used only for fail path handling when tty_add_file was not + * called yet. + */ +void tty_free_file(struct file *file) +{ + struct tty_file_private *priv = file->private_data; + + file->private_data = NULL; + kfree(priv); +} + +/* Delete file from its tty */ +static void tty_del_file(struct file *file) +{ + struct tty_file_private *priv = file->private_data; + struct tty_struct *tty = priv->tty; + + spin_lock(&tty->files_lock); + list_del(&priv->list); + spin_unlock(&tty->files_lock); + tty_free_file(file); +} + +/** + * tty_name - return tty naming + * @tty: tty structure + * + * Convert a tty structure into a name. The name reflects the kernel + * naming policy and if udev is in use may not reflect user space + * + * Locking: none + */ + +const char *tty_name(const struct tty_struct *tty) +{ + if (!tty) /* Hmm. NULL pointer. That's fun. */ + return "NULL tty"; + return tty->name; +} + +EXPORT_SYMBOL(tty_name); + +const char *tty_driver_name(const struct tty_struct *tty) +{ + if (!tty || !tty->driver) + return ""; + return tty->driver->name; +} + +static int tty_paranoia_check(struct tty_struct *tty, struct inode *inode, + const char *routine) +{ +#ifdef TTY_PARANOIA_CHECK + if (!tty) { + pr_warn("(%d:%d): %s: NULL tty\n", + imajor(inode), iminor(inode), routine); + return 1; + } + if (tty->magic != TTY_MAGIC) { + pr_warn("(%d:%d): %s: bad magic number\n", + imajor(inode), iminor(inode), routine); + return 1; + } +#endif + return 0; +} + +/* Caller must hold tty_lock */ +static int check_tty_count(struct tty_struct *tty, const char *routine) +{ +#ifdef CHECK_TTY_COUNT + struct list_head *p; + int count = 0, kopen_count = 0; + + spin_lock(&tty->files_lock); + list_for_each(p, &tty->tty_files) { + count++; + } + spin_unlock(&tty->files_lock); + if (tty->driver->type == TTY_DRIVER_TYPE_PTY && + tty->driver->subtype == PTY_TYPE_SLAVE && + tty->link && tty->link->count) + count++; + if (tty_port_kopened(tty->port)) + kopen_count++; + if (tty->count != (count + kopen_count)) { + tty_warn(tty, "%s: tty->count(%d) != (#fd's(%d) + #kopen's(%d))\n", + routine, tty->count, count, kopen_count); + return (count + kopen_count); + } +#endif + return 0; +} + +/** + * get_tty_driver - find device of a tty + * @device: device identifier + * @index: returns the index of the tty + * + * This routine returns a tty driver structure, given a device number + * and also passes back the index number. + * + * Locking: caller must hold tty_mutex + */ + +static struct tty_driver *get_tty_driver(dev_t device, int *index) +{ + struct tty_driver *p; + + list_for_each_entry(p, &tty_drivers, tty_drivers) { + dev_t base = MKDEV(p->major, p->minor_start); + if (device < base || device >= base + p->num) + continue; + *index = device - base; + return tty_driver_kref_get(p); + } + return NULL; +} + +/** + * tty_dev_name_to_number - return dev_t for device name + * @name: user space name of device under /dev + * @number: pointer to dev_t that this function will populate + * + * This function converts device names like ttyS0 or ttyUSB1 into dev_t + * like (4, 64) or (188, 1). If no corresponding driver is registered then + * the function returns -ENODEV. + * + * Locking: this acquires tty_mutex to protect the tty_drivers list from + * being modified while we are traversing it, and makes sure to + * release it before exiting. + */ +int tty_dev_name_to_number(const char *name, dev_t *number) +{ + struct tty_driver *p; + int ret; + int index, prefix_length = 0; + const char *str; + + for (str = name; *str && !isdigit(*str); str++) + ; + + if (!*str) + return -EINVAL; + + ret = kstrtoint(str, 10, &index); + if (ret) + return ret; + + prefix_length = str - name; + mutex_lock(&tty_mutex); + + list_for_each_entry(p, &tty_drivers, tty_drivers) + if (prefix_length == strlen(p->name) && strncmp(name, + p->name, prefix_length) == 0) { + if (index < p->num) { + *number = MKDEV(p->major, p->minor_start + index); + goto out; + } + } + + /* if here then driver wasn't found */ + ret = -ENODEV; +out: + mutex_unlock(&tty_mutex); + return ret; +} +EXPORT_SYMBOL_GPL(tty_dev_name_to_number); + +#ifdef CONFIG_CONSOLE_POLL + +/** + * tty_find_polling_driver - find device of a polled tty + * @name: name string to match + * @line: pointer to resulting tty line nr + * + * This routine returns a tty driver structure, given a name + * and the condition that the tty driver is capable of polled + * operation. + */ +struct tty_driver *tty_find_polling_driver(char *name, int *line) +{ + struct tty_driver *p, *res = NULL; + int tty_line = 0; + int len; + char *str, *stp; + + for (str = name; *str; str++) + if ((*str >= '0' && *str <= '9') || *str == ',') + break; + if (!*str) + return NULL; + + len = str - name; + tty_line = simple_strtoul(str, &str, 10); + + mutex_lock(&tty_mutex); + /* Search through the tty devices to look for a match */ + list_for_each_entry(p, &tty_drivers, tty_drivers) { + if (!len || strncmp(name, p->name, len) != 0) + continue; + stp = str; + if (*stp == ',') + stp++; + if (*stp == '\0') + stp = NULL; + + if (tty_line >= 0 && tty_line < p->num && p->ops && + p->ops->poll_init && !p->ops->poll_init(p, tty_line, stp)) { + res = tty_driver_kref_get(p); + *line = tty_line; + break; + } + } + mutex_unlock(&tty_mutex); + + return res; +} +EXPORT_SYMBOL_GPL(tty_find_polling_driver); +#endif + +static ssize_t hung_up_tty_read(struct kiocb *iocb, struct iov_iter *to) +{ + return 0; +} + +static ssize_t hung_up_tty_write(struct kiocb *iocb, struct iov_iter *from) +{ + return -EIO; +} + +/* No kernel lock held - none needed ;) */ +static __poll_t hung_up_tty_poll(struct file *filp, poll_table *wait) +{ + return EPOLLIN | EPOLLOUT | EPOLLERR | EPOLLHUP | EPOLLRDNORM | EPOLLWRNORM; +} + +static long hung_up_tty_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + return cmd == TIOCSPGRP ? -ENOTTY : -EIO; +} + +static long hung_up_tty_compat_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) +{ + return cmd == TIOCSPGRP ? -ENOTTY : -EIO; +} + +static int hung_up_tty_fasync(int fd, struct file *file, int on) +{ + return -ENOTTY; +} + +static void tty_show_fdinfo(struct seq_file *m, struct file *file) +{ + struct tty_struct *tty = file_tty(file); + + if (tty && tty->ops && tty->ops->show_fdinfo) + tty->ops->show_fdinfo(tty, m); +} + +static const struct file_operations tty_fops = { + .llseek = no_llseek, + .read_iter = tty_read, + .write_iter = tty_write, + .splice_read = generic_file_splice_read, + .splice_write = iter_file_splice_write, + .poll = tty_poll, + .unlocked_ioctl = tty_ioctl, + .compat_ioctl = tty_compat_ioctl, + .open = tty_open, + .release = tty_release, + .fasync = tty_fasync, + .show_fdinfo = tty_show_fdinfo, +}; + +static const struct file_operations console_fops = { + .llseek = no_llseek, + .read_iter = tty_read, + .write_iter = redirected_tty_write, + .splice_read = generic_file_splice_read, + .splice_write = iter_file_splice_write, + .poll = tty_poll, + .unlocked_ioctl = tty_ioctl, + .compat_ioctl = tty_compat_ioctl, + .open = tty_open, + .release = tty_release, + .fasync = tty_fasync, +}; + +static const struct file_operations hung_up_tty_fops = { + .llseek = no_llseek, + .read_iter = hung_up_tty_read, + .write_iter = hung_up_tty_write, + .poll = hung_up_tty_poll, + .unlocked_ioctl = hung_up_tty_ioctl, + .compat_ioctl = hung_up_tty_compat_ioctl, + .release = tty_release, + .fasync = hung_up_tty_fasync, +}; + +static DEFINE_SPINLOCK(redirect_lock); +static struct file *redirect; + +extern void tty_sysctl_init(void); + +/** + * tty_wakeup - request more data + * @tty: terminal + * + * Internal and external helper for wakeups of tty. This function + * informs the line discipline if present that the driver is ready + * to receive more output data. + */ + +void tty_wakeup(struct tty_struct *tty) +{ + struct tty_ldisc *ld; + + if (test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags)) { + ld = tty_ldisc_ref(tty); + if (ld) { + if (ld->ops->write_wakeup) + ld->ops->write_wakeup(tty); + tty_ldisc_deref(ld); + } + } + wake_up_interruptible_poll(&tty->write_wait, EPOLLOUT); +} + +EXPORT_SYMBOL_GPL(tty_wakeup); + +/** + * __tty_hangup - actual handler for hangup events + * @tty: tty device + * + * This can be called by a "kworker" kernel thread. That is process + * synchronous but doesn't hold any locks, so we need to make sure we + * have the appropriate locks for what we're doing. + * + * The hangup event clears any pending redirections onto the hung up + * device. It ensures future writes will error and it does the needed + * line discipline hangup and signal delivery. The tty object itself + * remains intact. + * + * Locking: + * BTM + * redirect lock for undoing redirection + * file list lock for manipulating list of ttys + * tty_ldiscs_lock from called functions + * termios_rwsem resetting termios data + * tasklist_lock to walk task list for hangup event + * ->siglock to protect ->signal/->sighand + */ +static void __tty_hangup(struct tty_struct *tty, int exit_session) +{ + struct file *cons_filp = NULL; + struct file *filp, *f = NULL; + struct tty_file_private *priv; + int closecount = 0, n; + int refs; + + if (!tty) + return; + + + spin_lock(&redirect_lock); + if (redirect && file_tty(redirect) == tty) { + f = redirect; + redirect = NULL; + } + spin_unlock(&redirect_lock); + + tty_lock(tty); + + if (test_bit(TTY_HUPPED, &tty->flags)) { + tty_unlock(tty); + return; + } + + /* + * Some console devices aren't actually hung up for technical and + * historical reasons, which can lead to indefinite interruptible + * sleep in n_tty_read(). The following explicitly tells + * n_tty_read() to abort readers. + */ + set_bit(TTY_HUPPING, &tty->flags); + + /* inuse_filps is protected by the single tty lock, + this really needs to change if we want to flush the + workqueue with the lock held */ + check_tty_count(tty, "tty_hangup"); + + spin_lock(&tty->files_lock); + /* This breaks for file handles being sent over AF_UNIX sockets ? */ + list_for_each_entry(priv, &tty->tty_files, list) { + filp = priv->file; + if (filp->f_op->write_iter == redirected_tty_write) + cons_filp = filp; + if (filp->f_op->write_iter != tty_write) + continue; + closecount++; + __tty_fasync(-1, filp, 0); /* can't block */ + filp->f_op = &hung_up_tty_fops; + } + spin_unlock(&tty->files_lock); + + refs = tty_signal_session_leader(tty, exit_session); + /* Account for the p->signal references we killed */ + while (refs--) + tty_kref_put(tty); + + tty_ldisc_hangup(tty, cons_filp != NULL); + + spin_lock_irq(&tty->ctrl_lock); + clear_bit(TTY_THROTTLED, &tty->flags); + clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); + put_pid(tty->session); + put_pid(tty->pgrp); + tty->session = NULL; + tty->pgrp = NULL; + tty->ctrl_status = 0; + spin_unlock_irq(&tty->ctrl_lock); + + /* + * If one of the devices matches a console pointer, we + * cannot just call hangup() because that will cause + * tty->count and state->count to go out of sync. + * So we just call close() the right number of times. + */ + if (cons_filp) { + if (tty->ops->close) + for (n = 0; n < closecount; n++) + tty->ops->close(tty, cons_filp); + } else if (tty->ops->hangup) + tty->ops->hangup(tty); + /* + * We don't want to have driver/ldisc interactions beyond the ones + * we did here. The driver layer expects no calls after ->hangup() + * from the ldisc side, which is now guaranteed. + */ + set_bit(TTY_HUPPED, &tty->flags); + clear_bit(TTY_HUPPING, &tty->flags); + tty_unlock(tty); + + if (f) + fput(f); +} + +static void do_tty_hangup(struct work_struct *work) +{ + struct tty_struct *tty = + container_of(work, struct tty_struct, hangup_work); + + __tty_hangup(tty, 0); +} + +/** + * tty_hangup - trigger a hangup event + * @tty: tty to hangup + * + * A carrier loss (virtual or otherwise) has occurred on this like + * schedule a hangup sequence to run after this event. + */ + +void tty_hangup(struct tty_struct *tty) +{ + tty_debug_hangup(tty, "hangup\n"); + schedule_work(&tty->hangup_work); +} + +EXPORT_SYMBOL(tty_hangup); + +/** + * tty_vhangup - process vhangup + * @tty: tty to hangup + * + * The user has asked via system call for the terminal to be hung up. + * We do this synchronously so that when the syscall returns the process + * is complete. That guarantee is necessary for security reasons. + */ + +void tty_vhangup(struct tty_struct *tty) +{ + tty_debug_hangup(tty, "vhangup\n"); + __tty_hangup(tty, 0); +} + +EXPORT_SYMBOL(tty_vhangup); + + +/** + * tty_vhangup_self - process vhangup for own ctty + * + * Perform a vhangup on the current controlling tty + */ + +void tty_vhangup_self(void) +{ + struct tty_struct *tty; + + tty = get_current_tty(); + if (tty) { + tty_vhangup(tty); + tty_kref_put(tty); + } +} + +/** + * tty_vhangup_session - hangup session leader exit + * @tty: tty to hangup + * + * The session leader is exiting and hanging up its controlling terminal. + * Every process in the foreground process group is signalled SIGHUP. + * + * We do this synchronously so that when the syscall returns the process + * is complete. That guarantee is necessary for security reasons. + */ + +void tty_vhangup_session(struct tty_struct *tty) +{ + tty_debug_hangup(tty, "session hangup\n"); + __tty_hangup(tty, 1); +} + +/** + * tty_hung_up_p - was tty hung up + * @filp: file pointer of tty + * + * Return true if the tty has been subject to a vhangup or a carrier + * loss + */ + +int tty_hung_up_p(struct file *filp) +{ + return (filp && filp->f_op == &hung_up_tty_fops); +} + +EXPORT_SYMBOL(tty_hung_up_p); + +/** + * stop_tty - propagate flow control + * @tty: tty to stop + * + * Perform flow control to the driver. May be called + * on an already stopped device and will not re-call the driver + * method. + * + * This functionality is used by both the line disciplines for + * halting incoming flow and by the driver. It may therefore be + * called from any context, may be under the tty atomic_write_lock + * but not always. + * + * Locking: + * flow_lock + */ + +void __stop_tty(struct tty_struct *tty) +{ + if (tty->stopped) + return; + tty->stopped = 1; + if (tty->ops->stop) + tty->ops->stop(tty); +} + +void stop_tty(struct tty_struct *tty) +{ + unsigned long flags; + + spin_lock_irqsave(&tty->flow_lock, flags); + __stop_tty(tty); + spin_unlock_irqrestore(&tty->flow_lock, flags); +} +EXPORT_SYMBOL(stop_tty); + +/** + * start_tty - propagate flow control + * @tty: tty to start + * + * Start a tty that has been stopped if at all possible. If this + * tty was previous stopped and is now being started, the driver + * start method is invoked and the line discipline woken. + * + * Locking: + * flow_lock + */ + +void __start_tty(struct tty_struct *tty) +{ + if (!tty->stopped || tty->flow_stopped) + return; + tty->stopped = 0; + if (tty->ops->start) + tty->ops->start(tty); + tty_wakeup(tty); +} + +void start_tty(struct tty_struct *tty) +{ + unsigned long flags; + + spin_lock_irqsave(&tty->flow_lock, flags); + __start_tty(tty); + spin_unlock_irqrestore(&tty->flow_lock, flags); +} +EXPORT_SYMBOL(start_tty); + +static void tty_update_time(struct timespec64 *time) +{ + time64_t sec = ktime_get_real_seconds(); + + /* + * We only care if the two values differ in anything other than the + * lower three bits (i.e every 8 seconds). If so, then we can update + * the time of the tty device, otherwise it could be construded as a + * security leak to let userspace know the exact timing of the tty. + */ + if ((sec ^ time->tv_sec) & ~7) + time->tv_sec = sec; +} + +/* + * Iterate on the ldisc ->read() function until we've gotten all + * the data the ldisc has for us. + * + * The "cookie" is something that the ldisc read function can fill + * in to let us know that there is more data to be had. + * + * We promise to continue to call the ldisc until it stops returning + * data or clears the cookie. The cookie may be something that the + * ldisc maintains state for and needs to free. + */ +static int iterate_tty_read(struct tty_ldisc *ld, struct tty_struct *tty, + struct file *file, struct iov_iter *to) +{ + int retval = 0; + void *cookie = NULL; + unsigned long offset = 0; + char kernel_buf[64]; + size_t count = iov_iter_count(to); + + do { + int size, copied; + + size = count > sizeof(kernel_buf) ? sizeof(kernel_buf) : count; + size = ld->ops->read(tty, file, kernel_buf, size, &cookie, offset); + if (!size) + break; + + if (size < 0) { + /* Did we have an earlier error (ie -EFAULT)? */ + if (retval) + break; + retval = size; + + /* + * -EOVERFLOW means we didn't have enough space + * for a whole packet, and we shouldn't return + * a partial result. + */ + if (retval == -EOVERFLOW) + offset = 0; + break; + } + + copied = copy_to_iter(kernel_buf, size, to); + offset += copied; + count -= copied; + + /* + * If the user copy failed, we still need to do another ->read() + * call if we had a cookie to let the ldisc clear up. + * + * But make sure size is zeroed. + */ + if (unlikely(copied != size)) { + count = 0; + retval = -EFAULT; + } + } while (cookie); + + /* We always clear tty buffer in case they contained passwords */ + memzero_explicit(kernel_buf, sizeof(kernel_buf)); + return offset ? offset : retval; +} + + +/** + * tty_read - read method for tty device files + * @file: pointer to tty file + * @buf: user buffer + * @count: size of user buffer + * @ppos: unused + * + * Perform the read system call function on this terminal device. Checks + * for hung up devices before calling the line discipline method. + * + * Locking: + * Locks the line discipline internally while needed. Multiple + * read calls may be outstanding in parallel. + */ + +static ssize_t tty_read(struct kiocb *iocb, struct iov_iter *to) +{ + int i; + struct file *file = iocb->ki_filp; + struct inode *inode = file_inode(file); + struct tty_struct *tty = file_tty(file); + struct tty_ldisc *ld; + + if (tty_paranoia_check(tty, inode, "tty_read")) + return -EIO; + if (!tty || tty_io_error(tty)) + return -EIO; + + /* We want to wait for the line discipline to sort out in this + situation */ + ld = tty_ldisc_ref_wait(tty); + if (!ld) + return hung_up_tty_read(iocb, to); + i = -EIO; + if (ld->ops->read) + i = iterate_tty_read(ld, tty, file, to); + tty_ldisc_deref(ld); + + if (i > 0) + tty_update_time(&inode->i_atime); + + return i; +} + +void tty_write_unlock(struct tty_struct *tty) +{ + mutex_unlock(&tty->atomic_write_lock); + wake_up_interruptible_poll(&tty->write_wait, EPOLLOUT); +} + +int tty_write_lock(struct tty_struct *tty, bool ndelay) +{ + if (!mutex_trylock(&tty->atomic_write_lock)) { + if (ndelay) + return -EAGAIN; + if (mutex_lock_interruptible(&tty->atomic_write_lock)) + return -ERESTARTSYS; + } + return 0; +} + +/* + * Split writes up in sane blocksizes to avoid + * denial-of-service type attacks + */ +static inline ssize_t do_tty_write( + ssize_t (*write)(struct tty_struct *, struct file *, const unsigned char *, size_t), + struct tty_struct *tty, + struct file *file, + struct iov_iter *from) +{ + size_t count = iov_iter_count(from); + ssize_t ret, written = 0; + unsigned int chunk; + + ret = tty_write_lock(tty, file->f_flags & O_NDELAY); + if (ret < 0) + return ret; + + /* + * We chunk up writes into a temporary buffer. This + * simplifies low-level drivers immensely, since they + * don't have locking issues and user mode accesses. + * + * But if TTY_NO_WRITE_SPLIT is set, we should use a + * big chunk-size.. + * + * The default chunk-size is 2kB, because the NTTY + * layer has problems with bigger chunks. It will + * claim to be able to handle more characters than + * it actually does. + * + * FIXME: This can probably go away now except that 64K chunks + * are too likely to fail unless switched to vmalloc... + */ + chunk = 2048; + if (test_bit(TTY_NO_WRITE_SPLIT, &tty->flags)) + chunk = 65536; + if (count < chunk) + chunk = count; + + /* write_buf/write_cnt is protected by the atomic_write_lock mutex */ + if (tty->write_cnt < chunk) { + unsigned char *buf_chunk; + + if (chunk < 1024) + chunk = 1024; + + buf_chunk = kmalloc(chunk, GFP_KERNEL); + if (!buf_chunk) { + ret = -ENOMEM; + goto out; + } + kfree(tty->write_buf); + tty->write_cnt = chunk; + tty->write_buf = buf_chunk; + } + + /* Do the write .. */ + for (;;) { + size_t size = count; + if (size > chunk) + size = chunk; + + ret = -EFAULT; + if (copy_from_iter(tty->write_buf, size, from) != size) + break; + + ret = write(tty, file, tty->write_buf, size); + if (ret <= 0) + break; + + written += ret; + if (ret > size) + break; + + /* FIXME! Have Al check this! */ + if (ret != size) + iov_iter_revert(from, size-ret); + + count -= ret; + if (!count) + break; + ret = -ERESTARTSYS; + if (signal_pending(current)) + break; + cond_resched(); + } + if (written) { + tty_update_time(&file_inode(file)->i_mtime); + ret = written; + } +out: + tty_write_unlock(tty); + return ret; +} + +/** + * tty_write_message - write a message to a certain tty, not just the console. + * @tty: the destination tty_struct + * @msg: the message to write + * + * This is used for messages that need to be redirected to a specific tty. + * We don't put it into the syslog queue right now maybe in the future if + * really needed. + * + * We must still hold the BTM and test the CLOSING flag for the moment. + */ + +void tty_write_message(struct tty_struct *tty, char *msg) +{ + if (tty) { + mutex_lock(&tty->atomic_write_lock); + tty_lock(tty); + if (tty->ops->write && tty->count > 0) + tty->ops->write(tty, msg, strlen(msg)); + tty_unlock(tty); + tty_write_unlock(tty); + } + return; +} + + +/** + * tty_write - write method for tty device file + * @file: tty file pointer + * @buf: user data to write + * @count: bytes to write + * @ppos: unused + * + * Write data to a tty device via the line discipline. + * + * Locking: + * Locks the line discipline as required + * Writes to the tty driver are serialized by the atomic_write_lock + * and are then processed in chunks to the device. The line discipline + * write method will not be invoked in parallel for each device. + */ + +static ssize_t file_tty_write(struct file *file, struct kiocb *iocb, struct iov_iter *from) +{ + struct tty_struct *tty = file_tty(file); + struct tty_ldisc *ld; + ssize_t ret; + + if (tty_paranoia_check(tty, file_inode(file), "tty_write")) + return -EIO; + if (!tty || !tty->ops->write || tty_io_error(tty)) + return -EIO; + /* Short term debug to catch buggy drivers */ + if (tty->ops->write_room == NULL) + tty_err(tty, "missing write_room method\n"); + ld = tty_ldisc_ref_wait(tty); + if (!ld) + return hung_up_tty_write(iocb, from); + if (!ld->ops->write) + ret = -EIO; + else + ret = do_tty_write(ld->ops->write, tty, file, from); + tty_ldisc_deref(ld); + return ret; +} + +static ssize_t tty_write(struct kiocb *iocb, struct iov_iter *from) +{ + return file_tty_write(iocb->ki_filp, iocb, from); +} + +ssize_t redirected_tty_write(struct kiocb *iocb, struct iov_iter *iter) +{ + struct file *p = NULL; + + spin_lock(&redirect_lock); + if (redirect) + p = get_file(redirect); + spin_unlock(&redirect_lock); + + /* + * We know the redirected tty is just another tty, we can can + * call file_tty_write() directly with that file pointer. + */ + if (p) { + ssize_t res; + res = file_tty_write(p, iocb, iter); + fput(p); + return res; + } + return tty_write(iocb, iter); +} + +/** + * tty_send_xchar - send priority character + * + * Send a high priority character to the tty even if stopped + * + * Locking: none for xchar method, write ordering for write method. + */ + +int tty_send_xchar(struct tty_struct *tty, char ch) +{ + int was_stopped = tty->stopped; + + if (tty->ops->send_xchar) { + down_read(&tty->termios_rwsem); + tty->ops->send_xchar(tty, ch); + up_read(&tty->termios_rwsem); + return 0; + } + + if (tty_write_lock(tty, false) < 0) + return -ERESTARTSYS; + + down_read(&tty->termios_rwsem); + if (was_stopped) + start_tty(tty); + tty->ops->write(tty, &ch, 1); + if (was_stopped) + stop_tty(tty); + up_read(&tty->termios_rwsem); + tty_write_unlock(tty); + return 0; +} + +static char ptychar[] = "pqrstuvwxyzabcde"; + +/** + * pty_line_name - generate name for a pty + * @driver: the tty driver in use + * @index: the minor number + * @p: output buffer of at least 6 bytes + * + * Generate a name from a driver reference and write it to the output + * buffer. + * + * Locking: None + */ +static void pty_line_name(struct tty_driver *driver, int index, char *p) +{ + int i = index + driver->name_base; + /* ->name is initialized to "ttyp", but "tty" is expected */ + sprintf(p, "%s%c%x", + driver->subtype == PTY_TYPE_SLAVE ? "tty" : driver->name, + ptychar[i >> 4 & 0xf], i & 0xf); +} + +/** + * tty_line_name - generate name for a tty + * @driver: the tty driver in use + * @index: the minor number + * @p: output buffer of at least 7 bytes + * + * Generate a name from a driver reference and write it to the output + * buffer. + * + * Locking: None + */ +static ssize_t tty_line_name(struct tty_driver *driver, int index, char *p) +{ + if (driver->flags & TTY_DRIVER_UNNUMBERED_NODE) + return sprintf(p, "%s", driver->name); + else + return sprintf(p, "%s%d", driver->name, + index + driver->name_base); +} + +/** + * tty_driver_lookup_tty() - find an existing tty, if any + * @driver: the driver for the tty + * @idx: the minor number + * + * Return the tty, if found. If not found, return NULL or ERR_PTR() if the + * driver lookup() method returns an error. + * + * Locking: tty_mutex must be held. If the tty is found, bump the tty kref. + */ +static struct tty_struct *tty_driver_lookup_tty(struct tty_driver *driver, + struct file *file, int idx) +{ + struct tty_struct *tty; + + if (driver->ops->lookup) { + if (!file) + tty = ERR_PTR(-EIO); + else + tty = driver->ops->lookup(driver, file, idx); + } else { + if (idx >= driver->num) + return ERR_PTR(-EINVAL); + tty = driver->ttys[idx]; + } + if (!IS_ERR(tty)) + tty_kref_get(tty); + return tty; +} + +/** + * tty_init_termios - helper for termios setup + * @tty: the tty to set up + * + * Initialise the termios structure for this tty. This runs under + * the tty_mutex currently so we can be relaxed about ordering. + */ + +void tty_init_termios(struct tty_struct *tty) +{ + struct ktermios *tp; + int idx = tty->index; + + if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) + tty->termios = tty->driver->init_termios; + else { + /* Check for lazy saved data */ + tp = tty->driver->termios[idx]; + if (tp != NULL) { + tty->termios = *tp; + tty->termios.c_line = tty->driver->init_termios.c_line; + } else + tty->termios = tty->driver->init_termios; + } + /* Compatibility until drivers always set this */ + tty->termios.c_ispeed = tty_termios_input_baud_rate(&tty->termios); + tty->termios.c_ospeed = tty_termios_baud_rate(&tty->termios); +} +EXPORT_SYMBOL_GPL(tty_init_termios); + +int tty_standard_install(struct tty_driver *driver, struct tty_struct *tty) +{ + tty_init_termios(tty); + tty_driver_kref_get(driver); + tty->count++; + driver->ttys[tty->index] = tty; + return 0; +} +EXPORT_SYMBOL_GPL(tty_standard_install); + +/** + * tty_driver_install_tty() - install a tty entry in the driver + * @driver: the driver for the tty + * @tty: the tty + * + * Install a tty object into the driver tables. The tty->index field + * will be set by the time this is called. This method is responsible + * for ensuring any need additional structures are allocated and + * configured. + * + * Locking: tty_mutex for now + */ +static int tty_driver_install_tty(struct tty_driver *driver, + struct tty_struct *tty) +{ + return driver->ops->install ? driver->ops->install(driver, tty) : + tty_standard_install(driver, tty); +} + +/** + * tty_driver_remove_tty() - remove a tty from the driver tables + * @driver: the driver for the tty + * @tty: tty to remove + * + * Remvoe a tty object from the driver tables. The tty->index field + * will be set by the time this is called. + * + * Locking: tty_mutex for now + */ +static void tty_driver_remove_tty(struct tty_driver *driver, struct tty_struct *tty) +{ + if (driver->ops->remove) + driver->ops->remove(driver, tty); + else + driver->ttys[tty->index] = NULL; +} + +/** + * tty_reopen() - fast re-open of an open tty + * @tty: the tty to open + * + * Return 0 on success, -errno on error. + * Re-opens on master ptys are not allowed and return -EIO. + * + * Locking: Caller must hold tty_lock + */ +static int tty_reopen(struct tty_struct *tty) +{ + struct tty_driver *driver = tty->driver; + struct tty_ldisc *ld; + int retval = 0; + + if (driver->type == TTY_DRIVER_TYPE_PTY && + driver->subtype == PTY_TYPE_MASTER) + return -EIO; + + if (!tty->count) + return -EAGAIN; + + if (test_bit(TTY_EXCLUSIVE, &tty->flags) && !capable(CAP_SYS_ADMIN)) + return -EBUSY; + + ld = tty_ldisc_ref_wait(tty); + if (ld) { + tty_ldisc_deref(ld); + } else { + retval = tty_ldisc_lock(tty, 5 * HZ); + if (retval) + return retval; + + if (!tty->ldisc) + retval = tty_ldisc_reinit(tty, tty->termios.c_line); + tty_ldisc_unlock(tty); + } + + if (retval == 0) + tty->count++; + + return retval; +} + +/** + * tty_init_dev - initialise a tty device + * @driver: tty driver we are opening a device on + * @idx: device index + * + * Prepare a tty device. This may not be a "new" clean device but + * could also be an active device. The pty drivers require special + * handling because of this. + * + * Locking: + * The function is called under the tty_mutex, which + * protects us from the tty struct or driver itself going away. + * + * On exit the tty device has the line discipline attached and + * a reference count of 1. If a pair was created for pty/tty use + * and the other was a pty master then it too has a reference count of 1. + * + * WSH 06/09/97: Rewritten to remove races and properly clean up after a + * failed open. The new code protects the open with a mutex, so it's + * really quite straightforward. The mutex locking can probably be + * relaxed for the (most common) case of reopening a tty. + * + * Return: returned tty structure + */ + +struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx) +{ + struct tty_struct *tty; + int retval; + + /* + * First time open is complex, especially for PTY devices. + * This code guarantees that either everything succeeds and the + * TTY is ready for operation, or else the table slots are vacated + * and the allocated memory released. (Except that the termios + * may be retained.) + */ + + if (!try_module_get(driver->owner)) + return ERR_PTR(-ENODEV); + + tty = alloc_tty_struct(driver, idx); + if (!tty) { + retval = -ENOMEM; + goto err_module_put; + } + + tty_lock(tty); + retval = tty_driver_install_tty(driver, tty); + if (retval < 0) + goto err_free_tty; + + if (!tty->port) + tty->port = driver->ports[idx]; + + if (WARN_RATELIMIT(!tty->port, + "%s: %s driver does not set tty->port. This would crash the kernel. Fix the driver!\n", + __func__, tty->driver->name)) { + retval = -EINVAL; + goto err_release_lock; + } + + retval = tty_ldisc_lock(tty, 5 * HZ); + if (retval) + goto err_release_lock; + tty->port->itty = tty; + + /* + * Structures all installed ... call the ldisc open routines. + * If we fail here just call release_tty to clean up. No need + * to decrement the use counts, as release_tty doesn't care. + */ + retval = tty_ldisc_setup(tty, tty->link); + if (retval) + goto err_release_tty; + tty_ldisc_unlock(tty); + /* Return the tty locked so that it cannot vanish under the caller */ + return tty; + +err_free_tty: + tty_unlock(tty); + free_tty_struct(tty); +err_module_put: + module_put(driver->owner); + return ERR_PTR(retval); + + /* call the tty release_tty routine to clean out this slot */ +err_release_tty: + tty_ldisc_unlock(tty); + tty_info_ratelimited(tty, "ldisc open failed (%d), clearing slot %d\n", + retval, idx); +err_release_lock: + tty_unlock(tty); + release_tty(tty, idx); + return ERR_PTR(retval); +} + +/** + * tty_save_termios() - save tty termios data in driver table + * @tty: tty whose termios data to save + * + * Locking: Caller guarantees serialisation with tty_init_termios(). + */ +void tty_save_termios(struct tty_struct *tty) +{ + struct ktermios *tp; + int idx = tty->index; + + /* If the port is going to reset then it has no termios to save */ + if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) + return; + + /* Stash the termios data */ + tp = tty->driver->termios[idx]; + if (tp == NULL) { + tp = kmalloc(sizeof(*tp), GFP_KERNEL); + if (tp == NULL) + return; + tty->driver->termios[idx] = tp; + } + *tp = tty->termios; +} +EXPORT_SYMBOL_GPL(tty_save_termios); + +/** + * tty_flush_works - flush all works of a tty/pty pair + * @tty: tty device to flush works for (or either end of a pty pair) + * + * Sync flush all works belonging to @tty (and the 'other' tty). + */ +static void tty_flush_works(struct tty_struct *tty) +{ + flush_work(&tty->SAK_work); + flush_work(&tty->hangup_work); + if (tty->link) { + flush_work(&tty->link->SAK_work); + flush_work(&tty->link->hangup_work); + } +} + +/** + * release_one_tty - release tty structure memory + * @work: work of tty we are obliterating + * + * Releases memory associated with a tty structure, and clears out the + * driver table slots. This function is called when a device is no longer + * in use. It also gets called when setup of a device fails. + * + * Locking: + * takes the file list lock internally when working on the list + * of ttys that the driver keeps. + * + * This method gets called from a work queue so that the driver private + * cleanup ops can sleep (needed for USB at least) + */ +static void release_one_tty(struct work_struct *work) +{ + struct tty_struct *tty = + container_of(work, struct tty_struct, hangup_work); + struct tty_driver *driver = tty->driver; + struct module *owner = driver->owner; + + if (tty->ops->cleanup) + tty->ops->cleanup(tty); + + tty->magic = 0; + tty_driver_kref_put(driver); + module_put(owner); + + spin_lock(&tty->files_lock); + list_del_init(&tty->tty_files); + spin_unlock(&tty->files_lock); + + put_pid(tty->pgrp); + put_pid(tty->session); + free_tty_struct(tty); +} + +static void queue_release_one_tty(struct kref *kref) +{ + struct tty_struct *tty = container_of(kref, struct tty_struct, kref); + + /* The hangup queue is now free so we can reuse it rather than + waste a chunk of memory for each port */ + INIT_WORK(&tty->hangup_work, release_one_tty); + schedule_work(&tty->hangup_work); +} + +/** + * tty_kref_put - release a tty kref + * @tty: tty device + * + * Release a reference to a tty device and if need be let the kref + * layer destruct the object for us + */ + +void tty_kref_put(struct tty_struct *tty) +{ + if (tty) + kref_put(&tty->kref, queue_release_one_tty); +} +EXPORT_SYMBOL(tty_kref_put); + +/** + * release_tty - release tty structure memory + * + * Release both @tty and a possible linked partner (think pty pair), + * and decrement the refcount of the backing module. + * + * Locking: + * tty_mutex + * takes the file list lock internally when working on the list + * of ttys that the driver keeps. + * + */ +static void release_tty(struct tty_struct *tty, int idx) +{ + /* This should always be true but check for the moment */ + WARN_ON(tty->index != idx); + WARN_ON(!mutex_is_locked(&tty_mutex)); + if (tty->ops->shutdown) + tty->ops->shutdown(tty); + tty_save_termios(tty); + tty_driver_remove_tty(tty->driver, tty); + if (tty->port) + tty->port->itty = NULL; + if (tty->link) + tty->link->port->itty = NULL; + if (tty->port) + tty_buffer_cancel_work(tty->port); + if (tty->link) + tty_buffer_cancel_work(tty->link->port); + + tty_kref_put(tty->link); + tty_kref_put(tty); +} + +/** + * tty_release_checks - check a tty before real release + * @tty: tty to check + * @idx: index of the tty + * + * Performs some paranoid checking before true release of the @tty. + * This is a no-op unless TTY_PARANOIA_CHECK is defined. + */ +static int tty_release_checks(struct tty_struct *tty, int idx) +{ +#ifdef TTY_PARANOIA_CHECK + if (idx < 0 || idx >= tty->driver->num) { + tty_debug(tty, "bad idx %d\n", idx); + return -1; + } + + /* not much to check for devpts */ + if (tty->driver->flags & TTY_DRIVER_DEVPTS_MEM) + return 0; + + if (tty != tty->driver->ttys[idx]) { + tty_debug(tty, "bad driver table[%d] = %p\n", + idx, tty->driver->ttys[idx]); + return -1; + } + if (tty->driver->other) { + struct tty_struct *o_tty = tty->link; + + if (o_tty != tty->driver->other->ttys[idx]) { + tty_debug(tty, "bad other table[%d] = %p\n", + idx, tty->driver->other->ttys[idx]); + return -1; + } + if (o_tty->link != tty) { + tty_debug(tty, "bad link = %p\n", o_tty->link); + return -1; + } + } +#endif + return 0; +} + +/** + * tty_kclose - closes tty opened by tty_kopen + * @tty: tty device + * + * Performs the final steps to release and free a tty device. It is the + * same as tty_release_struct except that it also resets TTY_PORT_KOPENED + * flag on tty->port. + */ +void tty_kclose(struct tty_struct *tty) +{ + /* + * Ask the line discipline code to release its structures + */ + tty_ldisc_release(tty); + + /* Wait for pending work before tty destruction commmences */ + tty_flush_works(tty); + + tty_debug_hangup(tty, "freeing structure\n"); + /* + * The release_tty function takes care of the details of clearing + * the slots and preserving the termios structure. + */ + mutex_lock(&tty_mutex); + tty_port_set_kopened(tty->port, 0); + release_tty(tty, tty->index); + mutex_unlock(&tty_mutex); +} +EXPORT_SYMBOL_GPL(tty_kclose); + +/** + * tty_release_struct - release a tty struct + * @tty: tty device + * @idx: index of the tty + * + * Performs the final steps to release and free a tty device. It is + * roughly the reverse of tty_init_dev. + */ +void tty_release_struct(struct tty_struct *tty, int idx) +{ + /* + * Ask the line discipline code to release its structures + */ + tty_ldisc_release(tty); + + /* Wait for pending work before tty destruction commmences */ + tty_flush_works(tty); + + tty_debug_hangup(tty, "freeing structure\n"); + /* + * The release_tty function takes care of the details of clearing + * the slots and preserving the termios structure. + */ + mutex_lock(&tty_mutex); + release_tty(tty, idx); + mutex_unlock(&tty_mutex); +} +EXPORT_SYMBOL_GPL(tty_release_struct); + +/** + * tty_release - vfs callback for close + * @inode: inode of tty + * @filp: file pointer for handle to tty + * + * Called the last time each file handle is closed that references + * this tty. There may however be several such references. + * + * Locking: + * Takes bkl. See tty_release_dev + * + * Even releasing the tty structures is a tricky business.. We have + * to be very careful that the structures are all released at the + * same time, as interrupts might otherwise get the wrong pointers. + * + * WSH 09/09/97: rewritten to avoid some nasty race conditions that could + * lead to double frees or releasing memory still in use. + */ + +int tty_release(struct inode *inode, struct file *filp) +{ + struct tty_struct *tty = file_tty(filp); + struct tty_struct *o_tty = NULL; + int do_sleep, final; + int idx; + long timeout = 0; + int once = 1; + + if (tty_paranoia_check(tty, inode, __func__)) + return 0; + + tty_lock(tty); + check_tty_count(tty, __func__); + + __tty_fasync(-1, filp, 0); + + idx = tty->index; + if (tty->driver->type == TTY_DRIVER_TYPE_PTY && + tty->driver->subtype == PTY_TYPE_MASTER) + o_tty = tty->link; + + if (tty_release_checks(tty, idx)) { + tty_unlock(tty); + return 0; + } + + tty_debug_hangup(tty, "releasing (count=%d)\n", tty->count); + + if (tty->ops->close) + tty->ops->close(tty, filp); + + /* If tty is pty master, lock the slave pty (stable lock order) */ + tty_lock_slave(o_tty); + + /* + * Sanity check: if tty->count is going to zero, there shouldn't be + * any waiters on tty->read_wait or tty->write_wait. We test the + * wait queues and kick everyone out _before_ actually starting to + * close. This ensures that we won't block while releasing the tty + * structure. + * + * The test for the o_tty closing is necessary, since the master and + * slave sides may close in any order. If the slave side closes out + * first, its count will be one, since the master side holds an open. + * Thus this test wouldn't be triggered at the time the slave closed, + * so we do it now. + */ + while (1) { + do_sleep = 0; + + if (tty->count <= 1) { + if (waitqueue_active(&tty->read_wait)) { + wake_up_poll(&tty->read_wait, EPOLLIN); + do_sleep++; + } + if (waitqueue_active(&tty->write_wait)) { + wake_up_poll(&tty->write_wait, EPOLLOUT); + do_sleep++; + } + } + if (o_tty && o_tty->count <= 1) { + if (waitqueue_active(&o_tty->read_wait)) { + wake_up_poll(&o_tty->read_wait, EPOLLIN); + do_sleep++; + } + if (waitqueue_active(&o_tty->write_wait)) { + wake_up_poll(&o_tty->write_wait, EPOLLOUT); + do_sleep++; + } + } + if (!do_sleep) + break; + + if (once) { + once = 0; + tty_warn(tty, "read/write wait queue active!\n"); + } + schedule_timeout_killable(timeout); + if (timeout < 120 * HZ) + timeout = 2 * timeout + 1; + else + timeout = MAX_SCHEDULE_TIMEOUT; + } + + if (o_tty) { + if (--o_tty->count < 0) { + tty_warn(tty, "bad slave count (%d)\n", o_tty->count); + o_tty->count = 0; + } + } + if (--tty->count < 0) { + tty_warn(tty, "bad tty->count (%d)\n", tty->count); + tty->count = 0; + } + + /* + * We've decremented tty->count, so we need to remove this file + * descriptor off the tty->tty_files list; this serves two + * purposes: + * - check_tty_count sees the correct number of file descriptors + * associated with this tty. + * - do_tty_hangup no longer sees this file descriptor as + * something that needs to be handled for hangups. + */ + tty_del_file(filp); + + /* + * Perform some housekeeping before deciding whether to return. + * + * If _either_ side is closing, make sure there aren't any + * processes that still think tty or o_tty is their controlling + * tty. + */ + if (!tty->count) { + read_lock(&tasklist_lock); + session_clear_tty(tty->session); + if (o_tty) + session_clear_tty(o_tty->session); + read_unlock(&tasklist_lock); + } + + /* check whether both sides are closing ... */ + final = !tty->count && !(o_tty && o_tty->count); + + tty_unlock_slave(o_tty); + tty_unlock(tty); + + /* At this point, the tty->count == 0 should ensure a dead tty + cannot be re-opened by a racing opener */ + + if (!final) + return 0; + + tty_debug_hangup(tty, "final close\n"); + + tty_release_struct(tty, idx); + return 0; +} + +/** + * tty_open_current_tty - get locked tty of current task + * @device: device number + * @filp: file pointer to tty + * @return: locked tty of the current task iff @device is /dev/tty + * + * Performs a re-open of the current task's controlling tty. + * + * We cannot return driver and index like for the other nodes because + * devpts will not work then. It expects inodes to be from devpts FS. + */ +static struct tty_struct *tty_open_current_tty(dev_t device, struct file *filp) +{ + struct tty_struct *tty; + int retval; + + if (device != MKDEV(TTYAUX_MAJOR, 0)) + return NULL; + + tty = get_current_tty(); + if (!tty) + return ERR_PTR(-ENXIO); + + filp->f_flags |= O_NONBLOCK; /* Don't let /dev/tty block */ + /* noctty = 1; */ + tty_lock(tty); + tty_kref_put(tty); /* safe to drop the kref now */ + + retval = tty_reopen(tty); + if (retval < 0) { + tty_unlock(tty); + tty = ERR_PTR(retval); + } + return tty; +} + +/** + * tty_lookup_driver - lookup a tty driver for a given device file + * @device: device number + * @filp: file pointer to tty + * @index: index for the device in the @return driver + * @return: driver for this inode (with increased refcount) + * + * If @return is not erroneous, the caller is responsible to decrement the + * refcount by tty_driver_kref_put. + * + * Locking: tty_mutex protects get_tty_driver + */ +static struct tty_driver *tty_lookup_driver(dev_t device, struct file *filp, + int *index) +{ + struct tty_driver *driver = NULL; + + switch (device) { +#ifdef CONFIG_VT + case MKDEV(TTY_MAJOR, 0): { + extern struct tty_driver *console_driver; + driver = tty_driver_kref_get(console_driver); + *index = fg_console; + break; + } +#endif + case MKDEV(TTYAUX_MAJOR, 1): { + struct tty_driver *console_driver = console_device(index); + if (console_driver) { + driver = tty_driver_kref_get(console_driver); + if (driver && filp) { + /* Don't let /dev/console block */ + filp->f_flags |= O_NONBLOCK; + break; + } + } + if (driver) + tty_driver_kref_put(driver); + return ERR_PTR(-ENODEV); + } + default: + driver = get_tty_driver(device, index); + if (!driver) + return ERR_PTR(-ENODEV); + break; + } + return driver; +} + +/** + * tty_kopen - open a tty device for kernel + * @device: dev_t of device to open + * + * Opens tty exclusively for kernel. Performs the driver lookup, + * makes sure it's not already opened and performs the first-time + * tty initialization. + * + * Returns the locked initialized &tty_struct + * + * Claims the global tty_mutex to serialize: + * - concurrent first-time tty initialization + * - concurrent tty driver removal w/ lookup + * - concurrent tty removal from driver table + */ +struct tty_struct *tty_kopen(dev_t device) +{ + struct tty_struct *tty; + struct tty_driver *driver; + int index = -1; + + mutex_lock(&tty_mutex); + driver = tty_lookup_driver(device, NULL, &index); + if (IS_ERR(driver)) { + mutex_unlock(&tty_mutex); + return ERR_CAST(driver); + } + + /* check whether we're reopening an existing tty */ + tty = tty_driver_lookup_tty(driver, NULL, index); + if (IS_ERR(tty)) + goto out; + + if (tty) { + /* drop kref from tty_driver_lookup_tty() */ + tty_kref_put(tty); + tty = ERR_PTR(-EBUSY); + } else { /* tty_init_dev returns tty with the tty_lock held */ + tty = tty_init_dev(driver, index); + if (IS_ERR(tty)) + goto out; + tty_port_set_kopened(tty->port, 1); + } +out: + mutex_unlock(&tty_mutex); + tty_driver_kref_put(driver); + return tty; +} +EXPORT_SYMBOL_GPL(tty_kopen); + +/** + * tty_open_by_driver - open a tty device + * @device: dev_t of device to open + * @filp: file pointer to tty + * + * Performs the driver lookup, checks for a reopen, or otherwise + * performs the first-time tty initialization. + * + * Returns the locked initialized or re-opened &tty_struct + * + * Claims the global tty_mutex to serialize: + * - concurrent first-time tty initialization + * - concurrent tty driver removal w/ lookup + * - concurrent tty removal from driver table + */ +static struct tty_struct *tty_open_by_driver(dev_t device, + struct file *filp) +{ + struct tty_struct *tty; + struct tty_driver *driver = NULL; + int index = -1; + int retval; + + mutex_lock(&tty_mutex); + driver = tty_lookup_driver(device, filp, &index); + if (IS_ERR(driver)) { + mutex_unlock(&tty_mutex); + return ERR_CAST(driver); + } + + /* check whether we're reopening an existing tty */ + tty = tty_driver_lookup_tty(driver, filp, index); + if (IS_ERR(tty)) { + mutex_unlock(&tty_mutex); + goto out; + } + + if (tty) { + if (tty_port_kopened(tty->port)) { + tty_kref_put(tty); + mutex_unlock(&tty_mutex); + tty = ERR_PTR(-EBUSY); + goto out; + } + mutex_unlock(&tty_mutex); + retval = tty_lock_interruptible(tty); + tty_kref_put(tty); /* drop kref from tty_driver_lookup_tty() */ + if (retval) { + if (retval == -EINTR) + retval = -ERESTARTSYS; + tty = ERR_PTR(retval); + goto out; + } + retval = tty_reopen(tty); + if (retval < 0) { + tty_unlock(tty); + tty = ERR_PTR(retval); + } + } else { /* Returns with the tty_lock held for now */ + tty = tty_init_dev(driver, index); + mutex_unlock(&tty_mutex); + } +out: + tty_driver_kref_put(driver); + return tty; +} + +/** + * tty_open - open a tty device + * @inode: inode of device file + * @filp: file pointer to tty + * + * tty_open and tty_release keep up the tty count that contains the + * number of opens done on a tty. We cannot use the inode-count, as + * different inodes might point to the same tty. + * + * Open-counting is needed for pty masters, as well as for keeping + * track of serial lines: DTR is dropped when the last close happens. + * (This is not done solely through tty->count, now. - Ted 1/27/92) + * + * The termios state of a pty is reset on first open so that + * settings don't persist across reuse. + * + * Locking: tty_mutex protects tty, tty_lookup_driver and tty_init_dev. + * tty->count should protect the rest. + * ->siglock protects ->signal/->sighand + * + * Note: the tty_unlock/lock cases without a ref are only safe due to + * tty_mutex + */ + +static int tty_open(struct inode *inode, struct file *filp) +{ + struct tty_struct *tty; + int noctty, retval; + dev_t device = inode->i_rdev; + unsigned saved_flags = filp->f_flags; + + nonseekable_open(inode, filp); + +retry_open: + retval = tty_alloc_file(filp); + if (retval) + return -ENOMEM; + + tty = tty_open_current_tty(device, filp); + if (!tty) + tty = tty_open_by_driver(device, filp); + + if (IS_ERR(tty)) { + tty_free_file(filp); + retval = PTR_ERR(tty); + if (retval != -EAGAIN || signal_pending(current)) + return retval; + schedule(); + goto retry_open; + } + + tty_add_file(tty, filp); + + check_tty_count(tty, __func__); + tty_debug_hangup(tty, "opening (count=%d)\n", tty->count); + + if (tty->ops->open) + retval = tty->ops->open(tty, filp); + else + retval = -ENODEV; + filp->f_flags = saved_flags; + + if (retval) { + tty_debug_hangup(tty, "open error %d, releasing\n", retval); + + tty_unlock(tty); /* need to call tty_release without BTM */ + tty_release(inode, filp); + if (retval != -ERESTARTSYS) + return retval; + + if (signal_pending(current)) + return retval; + + schedule(); + /* + * Need to reset f_op in case a hangup happened. + */ + if (tty_hung_up_p(filp)) + filp->f_op = &tty_fops; + goto retry_open; + } + clear_bit(TTY_HUPPED, &tty->flags); + + noctty = (filp->f_flags & O_NOCTTY) || + (IS_ENABLED(CONFIG_VT) && device == MKDEV(TTY_MAJOR, 0)) || + device == MKDEV(TTYAUX_MAJOR, 1) || + (tty->driver->type == TTY_DRIVER_TYPE_PTY && + tty->driver->subtype == PTY_TYPE_MASTER); + if (!noctty) + tty_open_proc_set_tty(filp, tty); + tty_unlock(tty); + return 0; +} + + + +/** + * tty_poll - check tty status + * @filp: file being polled + * @wait: poll wait structures to update + * + * Call the line discipline polling method to obtain the poll + * status of the device. + * + * Locking: locks called line discipline but ldisc poll method + * may be re-entered freely by other callers. + */ + +static __poll_t tty_poll(struct file *filp, poll_table *wait) +{ + struct tty_struct *tty = file_tty(filp); + struct tty_ldisc *ld; + __poll_t ret = 0; + + if (tty_paranoia_check(tty, file_inode(filp), "tty_poll")) + return 0; + + ld = tty_ldisc_ref_wait(tty); + if (!ld) + return hung_up_tty_poll(filp, wait); + if (ld->ops->poll) + ret = ld->ops->poll(tty, filp, wait); + tty_ldisc_deref(ld); + return ret; +} + +static int __tty_fasync(int fd, struct file *filp, int on) +{ + struct tty_struct *tty = file_tty(filp); + unsigned long flags; + int retval = 0; + + if (tty_paranoia_check(tty, file_inode(filp), "tty_fasync")) + goto out; + + retval = fasync_helper(fd, filp, on, &tty->fasync); + if (retval <= 0) + goto out; + + if (on) { + enum pid_type type; + struct pid *pid; + + spin_lock_irqsave(&tty->ctrl_lock, flags); + if (tty->pgrp) { + pid = tty->pgrp; + type = PIDTYPE_PGID; + } else { + pid = task_pid(current); + type = PIDTYPE_TGID; + } + get_pid(pid); + spin_unlock_irqrestore(&tty->ctrl_lock, flags); + __f_setown(filp, pid, type, 0); + put_pid(pid); + retval = 0; + } +out: + return retval; +} + +static int tty_fasync(int fd, struct file *filp, int on) +{ + struct tty_struct *tty = file_tty(filp); + int retval = -ENOTTY; + + tty_lock(tty); + if (!tty_hung_up_p(filp)) + retval = __tty_fasync(fd, filp, on); + tty_unlock(tty); + + return retval; +} + +/** + * tiocsti - fake input character + * @tty: tty to fake input into + * @p: pointer to character + * + * Fake input to a tty device. Does the necessary locking and + * input management. + * + * FIXME: does not honour flow control ?? + * + * Locking: + * Called functions take tty_ldiscs_lock + * current->signal->tty check is safe without locks + */ + +static int tiocsti(struct tty_struct *tty, char __user *p) +{ + char ch, mbz = 0; + struct tty_ldisc *ld; + + if ((current->signal->tty != tty) && !capable(CAP_SYS_ADMIN)) + return -EPERM; + if (get_user(ch, p)) + return -EFAULT; + tty_audit_tiocsti(tty, ch); + ld = tty_ldisc_ref_wait(tty); + if (!ld) + return -EIO; + tty_buffer_lock_exclusive(tty->port); + if (ld->ops->receive_buf) + ld->ops->receive_buf(tty, &ch, &mbz, 1); + tty_buffer_unlock_exclusive(tty->port); + tty_ldisc_deref(ld); + return 0; +} + +/** + * tiocgwinsz - implement window query ioctl + * @tty: tty + * @arg: user buffer for result + * + * Copies the kernel idea of the window size into the user buffer. + * + * Locking: tty->winsize_mutex is taken to ensure the winsize data + * is consistent. + */ + +static int tiocgwinsz(struct tty_struct *tty, struct winsize __user *arg) +{ + int err; + + mutex_lock(&tty->winsize_mutex); + err = copy_to_user(arg, &tty->winsize, sizeof(*arg)); + mutex_unlock(&tty->winsize_mutex); + + return err ? -EFAULT: 0; +} + +/** + * tty_do_resize - resize event + * @tty: tty being resized + * @ws: new dimensions + * + * Update the termios variables and send the necessary signals to + * peform a terminal resize correctly + */ + +int tty_do_resize(struct tty_struct *tty, struct winsize *ws) +{ + struct pid *pgrp; + + /* Lock the tty */ + mutex_lock(&tty->winsize_mutex); + if (!memcmp(ws, &tty->winsize, sizeof(*ws))) + goto done; + + /* Signal the foreground process group */ + pgrp = tty_get_pgrp(tty); + if (pgrp) + kill_pgrp(pgrp, SIGWINCH, 1); + put_pid(pgrp); + + tty->winsize = *ws; +done: + mutex_unlock(&tty->winsize_mutex); + return 0; +} +EXPORT_SYMBOL(tty_do_resize); + +/** + * tiocswinsz - implement window size set ioctl + * @tty: tty side of tty + * @arg: user buffer for result + * + * Copies the user idea of the window size to the kernel. Traditionally + * this is just advisory information but for the Linux console it + * actually has driver level meaning and triggers a VC resize. + * + * Locking: + * Driver dependent. The default do_resize method takes the + * tty termios mutex and ctrl_lock. The console takes its own lock + * then calls into the default method. + */ + +static int tiocswinsz(struct tty_struct *tty, struct winsize __user *arg) +{ + struct winsize tmp_ws; + if (copy_from_user(&tmp_ws, arg, sizeof(*arg))) + return -EFAULT; + + if (tty->ops->resize) + return tty->ops->resize(tty, &tmp_ws); + else + return tty_do_resize(tty, &tmp_ws); +} + +/** + * tioccons - allow admin to move logical console + * @file: the file to become console + * + * Allow the administrator to move the redirected console device + * + * Locking: uses redirect_lock to guard the redirect information + */ + +static int tioccons(struct file *file) +{ + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + if (file->f_op->write_iter == redirected_tty_write) { + struct file *f; + spin_lock(&redirect_lock); + f = redirect; + redirect = NULL; + spin_unlock(&redirect_lock); + if (f) + fput(f); + return 0; + } + if (file->f_op->write_iter != tty_write) + return -ENOTTY; + if (!(file->f_mode & FMODE_WRITE)) + return -EBADF; + if (!(file->f_mode & FMODE_CAN_WRITE)) + return -EINVAL; + spin_lock(&redirect_lock); + if (redirect) { + spin_unlock(&redirect_lock); + return -EBUSY; + } + redirect = get_file(file); + spin_unlock(&redirect_lock); + return 0; +} + +/** + * tiocsetd - set line discipline + * @tty: tty device + * @p: pointer to user data + * + * Set the line discipline according to user request. + * + * Locking: see tty_set_ldisc, this function is just a helper + */ + +static int tiocsetd(struct tty_struct *tty, int __user *p) +{ + int disc; + int ret; + + if (get_user(disc, p)) + return -EFAULT; + + ret = tty_set_ldisc(tty, disc); + + return ret; +} + +/** + * tiocgetd - get line discipline + * @tty: tty device + * @p: pointer to user data + * + * Retrieves the line discipline id directly from the ldisc. + * + * Locking: waits for ldisc reference (in case the line discipline + * is changing or the tty is being hungup) + */ + +static int tiocgetd(struct tty_struct *tty, int __user *p) +{ + struct tty_ldisc *ld; + int ret; + + ld = tty_ldisc_ref_wait(tty); + if (!ld) + return -EIO; + ret = put_user(ld->ops->num, p); + tty_ldisc_deref(ld); + return ret; +} + +/** + * send_break - performed time break + * @tty: device to break on + * @duration: timeout in mS + * + * Perform a timed break on hardware that lacks its own driver level + * timed break functionality. + * + * Locking: + * atomic_write_lock serializes + * + */ + +static int send_break(struct tty_struct *tty, unsigned int duration) +{ + int retval; + + if (tty->ops->break_ctl == NULL) + return 0; + + if (tty->driver->flags & TTY_DRIVER_HARDWARE_BREAK) + return tty->ops->break_ctl(tty, duration); + + /* Do the work ourselves */ + if (tty_write_lock(tty, false) < 0) + return -EINTR; + + retval = tty->ops->break_ctl(tty, -1); + if (!retval) { + msleep_interruptible(duration); + retval = tty->ops->break_ctl(tty, 0); + } else if (retval == -EOPNOTSUPP) { + /* some drivers can tell only dynamically */ + retval = 0; + } + tty_write_unlock(tty); + + if (signal_pending(current)) + retval = -EINTR; + + return retval; +} + +/** + * tty_tiocmget - get modem status + * @tty: tty device + * @p: pointer to result + * + * Obtain the modem status bits from the tty driver if the feature + * is supported. Return -ENOTTY if it is not available. + * + * Locking: none (up to the driver) + */ + +static int tty_tiocmget(struct tty_struct *tty, int __user *p) +{ + int retval = -ENOTTY; + + if (tty->ops->tiocmget) { + retval = tty->ops->tiocmget(tty); + + if (retval >= 0) + retval = put_user(retval, p); + } + return retval; +} + +/** + * tty_tiocmset - set modem status + * @tty: tty device + * @cmd: command - clear bits, set bits or set all + * @p: pointer to desired bits + * + * Set the modem status bits from the tty driver if the feature + * is supported. Return -ENOTTY if it is not available. + * + * Locking: none (up to the driver) + */ + +static int tty_tiocmset(struct tty_struct *tty, unsigned int cmd, + unsigned __user *p) +{ + int retval; + unsigned int set, clear, val; + + if (tty->ops->tiocmset == NULL) + return -ENOTTY; + + retval = get_user(val, p); + if (retval) + return retval; + set = clear = 0; + switch (cmd) { + case TIOCMBIS: + set = val; + break; + case TIOCMBIC: + clear = val; + break; + case TIOCMSET: + set = val; + clear = ~val; + break; + } + set &= TIOCM_DTR|TIOCM_RTS|TIOCM_OUT1|TIOCM_OUT2|TIOCM_LOOP; + clear &= TIOCM_DTR|TIOCM_RTS|TIOCM_OUT1|TIOCM_OUT2|TIOCM_LOOP; + return tty->ops->tiocmset(tty, set, clear); +} + +static int tty_tiocgicount(struct tty_struct *tty, void __user *arg) +{ + int retval = -EINVAL; + struct serial_icounter_struct icount; + memset(&icount, 0, sizeof(icount)); + if (tty->ops->get_icount) + retval = tty->ops->get_icount(tty, &icount); + if (retval != 0) + return retval; + if (copy_to_user(arg, &icount, sizeof(icount))) + return -EFAULT; + return 0; +} + +static int tty_tiocsserial(struct tty_struct *tty, struct serial_struct __user *ss) +{ + static DEFINE_RATELIMIT_STATE(depr_flags, + DEFAULT_RATELIMIT_INTERVAL, + DEFAULT_RATELIMIT_BURST); + char comm[TASK_COMM_LEN]; + struct serial_struct v; + int flags; + + if (copy_from_user(&v, ss, sizeof(*ss))) + return -EFAULT; + + flags = v.flags & ASYNC_DEPRECATED; + + if (flags && __ratelimit(&depr_flags)) + pr_warn("%s: '%s' is using deprecated serial flags (with no effect): %.8x\n", + __func__, get_task_comm(comm, current), flags); + if (!tty->ops->set_serial) + return -ENOTTY; + return tty->ops->set_serial(tty, &v); +} + +static int tty_tiocgserial(struct tty_struct *tty, struct serial_struct __user *ss) +{ + struct serial_struct v; + int err; + + memset(&v, 0, sizeof(v)); + if (!tty->ops->get_serial) + return -ENOTTY; + err = tty->ops->get_serial(tty, &v); + if (!err && copy_to_user(ss, &v, sizeof(v))) + err = -EFAULT; + return err; +} + +/* + * if pty, return the slave side (real_tty) + * otherwise, return self + */ +static struct tty_struct *tty_pair_get_tty(struct tty_struct *tty) +{ + if (tty->driver->type == TTY_DRIVER_TYPE_PTY && + tty->driver->subtype == PTY_TYPE_MASTER) + tty = tty->link; + return tty; +} + +/* + * Split this up, as gcc can choke on it otherwise.. + */ +long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + struct tty_struct *tty = file_tty(file); + struct tty_struct *real_tty; + void __user *p = (void __user *)arg; + int retval; + struct tty_ldisc *ld; + + if (tty_paranoia_check(tty, file_inode(file), "tty_ioctl")) + return -EINVAL; + + real_tty = tty_pair_get_tty(tty); + + /* + * Factor out some common prep work + */ + switch (cmd) { + case TIOCSETD: + case TIOCSBRK: + case TIOCCBRK: + case TCSBRK: + case TCSBRKP: + retval = tty_check_change(tty); + if (retval) + return retval; + if (cmd != TIOCCBRK) { + tty_wait_until_sent(tty, 0); + if (signal_pending(current)) + return -EINTR; + } + break; + } + + /* + * Now do the stuff. + */ + switch (cmd) { + case TIOCSTI: + return tiocsti(tty, p); + case TIOCGWINSZ: + return tiocgwinsz(real_tty, p); + case TIOCSWINSZ: + return tiocswinsz(real_tty, p); + case TIOCCONS: + return real_tty != tty ? -EINVAL : tioccons(file); + case TIOCEXCL: + set_bit(TTY_EXCLUSIVE, &tty->flags); + return 0; + case TIOCNXCL: + clear_bit(TTY_EXCLUSIVE, &tty->flags); + return 0; + case TIOCGEXCL: + { + int excl = test_bit(TTY_EXCLUSIVE, &tty->flags); + return put_user(excl, (int __user *)p); + } + case TIOCGETD: + return tiocgetd(tty, p); + case TIOCSETD: + return tiocsetd(tty, p); + case TIOCVHANGUP: + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + tty_vhangup(tty); + return 0; + case TIOCGDEV: + { + unsigned int ret = new_encode_dev(tty_devnum(real_tty)); + return put_user(ret, (unsigned int __user *)p); + } + /* + * Break handling + */ + case TIOCSBRK: /* Turn break on, unconditionally */ + if (tty->ops->break_ctl) + return tty->ops->break_ctl(tty, -1); + return 0; + case TIOCCBRK: /* Turn break off, unconditionally */ + if (tty->ops->break_ctl) + return tty->ops->break_ctl(tty, 0); + return 0; + case TCSBRK: /* SVID version: non-zero arg --> no break */ + /* non-zero arg means wait for all output data + * to be sent (performed above) but don't send break. + * This is used by the tcdrain() termios function. + */ + if (!arg) + return send_break(tty, 250); + return 0; + case TCSBRKP: /* support for POSIX tcsendbreak() */ + return send_break(tty, arg ? arg*100 : 250); + + case TIOCMGET: + return tty_tiocmget(tty, p); + case TIOCMSET: + case TIOCMBIC: + case TIOCMBIS: + return tty_tiocmset(tty, cmd, p); + case TIOCGICOUNT: + return tty_tiocgicount(tty, p); + case TCFLSH: + switch (arg) { + case TCIFLUSH: + case TCIOFLUSH: + /* flush tty buffer and allow ldisc to process ioctl */ + tty_buffer_flush(tty, NULL); + break; + } + break; + case TIOCSSERIAL: + return tty_tiocsserial(tty, p); + case TIOCGSERIAL: + return tty_tiocgserial(tty, p); + case TIOCGPTPEER: + /* Special because the struct file is needed */ + return ptm_open_peer(file, tty, (int)arg); + default: + retval = tty_jobctrl_ioctl(tty, real_tty, file, cmd, arg); + if (retval != -ENOIOCTLCMD) + return retval; + } + if (tty->ops->ioctl) { + retval = tty->ops->ioctl(tty, cmd, arg); + if (retval != -ENOIOCTLCMD) + return retval; + } + ld = tty_ldisc_ref_wait(tty); + if (!ld) + return hung_up_tty_ioctl(file, cmd, arg); + retval = -EINVAL; + if (ld->ops->ioctl) { + retval = ld->ops->ioctl(tty, file, cmd, arg); + if (retval == -ENOIOCTLCMD) + retval = -ENOTTY; + } + tty_ldisc_deref(ld); + return retval; +} + +#ifdef CONFIG_COMPAT + +struct serial_struct32 { + compat_int_t type; + compat_int_t line; + compat_uint_t port; + compat_int_t irq; + compat_int_t flags; + compat_int_t xmit_fifo_size; + compat_int_t custom_divisor; + compat_int_t baud_base; + unsigned short close_delay; + char io_type; + char reserved_char; + compat_int_t hub6; + unsigned short closing_wait; /* time to wait before closing */ + unsigned short closing_wait2; /* no longer used... */ + compat_uint_t iomem_base; + unsigned short iomem_reg_shift; + unsigned int port_high; + /* compat_ulong_t iomap_base FIXME */ + compat_int_t reserved; +}; + +static int compat_tty_tiocsserial(struct tty_struct *tty, + struct serial_struct32 __user *ss) +{ + static DEFINE_RATELIMIT_STATE(depr_flags, + DEFAULT_RATELIMIT_INTERVAL, + DEFAULT_RATELIMIT_BURST); + char comm[TASK_COMM_LEN]; + struct serial_struct32 v32; + struct serial_struct v; + int flags; + + if (copy_from_user(&v32, ss, sizeof(*ss))) + return -EFAULT; + + memcpy(&v, &v32, offsetof(struct serial_struct32, iomem_base)); + v.iomem_base = compat_ptr(v32.iomem_base); + v.iomem_reg_shift = v32.iomem_reg_shift; + v.port_high = v32.port_high; + v.iomap_base = 0; + + flags = v.flags & ASYNC_DEPRECATED; + + if (flags && __ratelimit(&depr_flags)) + pr_warn("%s: '%s' is using deprecated serial flags (with no effect): %.8x\n", + __func__, get_task_comm(comm, current), flags); + if (!tty->ops->set_serial) + return -ENOTTY; + return tty->ops->set_serial(tty, &v); +} + +static int compat_tty_tiocgserial(struct tty_struct *tty, + struct serial_struct32 __user *ss) +{ + struct serial_struct32 v32; + struct serial_struct v; + int err; + + memset(&v, 0, sizeof(v)); + memset(&v32, 0, sizeof(v32)); + + if (!tty->ops->get_serial) + return -ENOTTY; + err = tty->ops->get_serial(tty, &v); + if (!err) { + memcpy(&v32, &v, offsetof(struct serial_struct32, iomem_base)); + v32.iomem_base = (unsigned long)v.iomem_base >> 32 ? + 0xfffffff : ptr_to_compat(v.iomem_base); + v32.iomem_reg_shift = v.iomem_reg_shift; + v32.port_high = v.port_high; + if (copy_to_user(ss, &v32, sizeof(v32))) + err = -EFAULT; + } + return err; +} +static long tty_compat_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + struct tty_struct *tty = file_tty(file); + struct tty_ldisc *ld; + int retval = -ENOIOCTLCMD; + + switch (cmd) { + case TIOCOUTQ: + case TIOCSTI: + case TIOCGWINSZ: + case TIOCSWINSZ: + case TIOCGEXCL: + case TIOCGETD: + case TIOCSETD: + case TIOCGDEV: + case TIOCMGET: + case TIOCMSET: + case TIOCMBIC: + case TIOCMBIS: + case TIOCGICOUNT: + case TIOCGPGRP: + case TIOCSPGRP: + case TIOCGSID: + case TIOCSERGETLSR: + case TIOCGRS485: + case TIOCSRS485: +#ifdef TIOCGETP + case TIOCGETP: + case TIOCSETP: + case TIOCSETN: +#endif +#ifdef TIOCGETC + case TIOCGETC: + case TIOCSETC: +#endif +#ifdef TIOCGLTC + case TIOCGLTC: + case TIOCSLTC: +#endif + case TCSETSF: + case TCSETSW: + case TCSETS: + case TCGETS: +#ifdef TCGETS2 + case TCGETS2: + case TCSETSF2: + case TCSETSW2: + case TCSETS2: +#endif + case TCGETA: + case TCSETAF: + case TCSETAW: + case TCSETA: + case TIOCGLCKTRMIOS: + case TIOCSLCKTRMIOS: +#ifdef TCGETX + case TCGETX: + case TCSETX: + case TCSETXW: + case TCSETXF: +#endif + case TIOCGSOFTCAR: + case TIOCSSOFTCAR: + + case PPPIOCGCHAN: + case PPPIOCGUNIT: + return tty_ioctl(file, cmd, (unsigned long)compat_ptr(arg)); + case TIOCCONS: + case TIOCEXCL: + case TIOCNXCL: + case TIOCVHANGUP: + case TIOCSBRK: + case TIOCCBRK: + case TCSBRK: + case TCSBRKP: + case TCFLSH: + case TIOCGPTPEER: + case TIOCNOTTY: + case TIOCSCTTY: + case TCXONC: + case TIOCMIWAIT: + case TIOCSERCONFIG: + return tty_ioctl(file, cmd, arg); + } + + if (tty_paranoia_check(tty, file_inode(file), "tty_ioctl")) + return -EINVAL; + + switch (cmd) { + case TIOCSSERIAL: + return compat_tty_tiocsserial(tty, compat_ptr(arg)); + case TIOCGSERIAL: + return compat_tty_tiocgserial(tty, compat_ptr(arg)); + } + if (tty->ops->compat_ioctl) { + retval = tty->ops->compat_ioctl(tty, cmd, arg); + if (retval != -ENOIOCTLCMD) + return retval; + } + + ld = tty_ldisc_ref_wait(tty); + if (!ld) + return hung_up_tty_compat_ioctl(file, cmd, arg); + if (ld->ops->compat_ioctl) + retval = ld->ops->compat_ioctl(tty, file, cmd, arg); + if (retval == -ENOIOCTLCMD && ld->ops->ioctl) + retval = ld->ops->ioctl(tty, file, + (unsigned long)compat_ptr(cmd), arg); + tty_ldisc_deref(ld); + + return retval; +} +#endif + +static int this_tty(const void *t, struct file *file, unsigned fd) +{ + if (likely(file->f_op->read_iter != tty_read)) + return 0; + return file_tty(file) != t ? 0 : fd + 1; +} + +/* + * This implements the "Secure Attention Key" --- the idea is to + * prevent trojan horses by killing all processes associated with this + * tty when the user hits the "Secure Attention Key". Required for + * super-paranoid applications --- see the Orange Book for more details. + * + * This code could be nicer; ideally it should send a HUP, wait a few + * seconds, then send a INT, and then a KILL signal. But you then + * have to coordinate with the init process, since all processes associated + * with the current tty must be dead before the new getty is allowed + * to spawn. + * + * Now, if it would be correct ;-/ The current code has a nasty hole - + * it doesn't catch files in flight. We may send the descriptor to ourselves + * via AF_UNIX socket, close it and later fetch from socket. FIXME. + * + * Nasty bug: do_SAK is being called in interrupt context. This can + * deadlock. We punt it up to process context. AKPM - 16Mar2001 + */ +void __do_SAK(struct tty_struct *tty) +{ +#ifdef TTY_SOFT_SAK + tty_hangup(tty); +#else + struct task_struct *g, *p; + struct pid *session; + int i; + unsigned long flags; + + if (!tty) + return; + + spin_lock_irqsave(&tty->ctrl_lock, flags); + session = get_pid(tty->session); + spin_unlock_irqrestore(&tty->ctrl_lock, flags); + + tty_ldisc_flush(tty); + + tty_driver_flush_buffer(tty); + + read_lock(&tasklist_lock); + /* Kill the entire session */ + do_each_pid_task(session, PIDTYPE_SID, p) { + tty_notice(tty, "SAK: killed process %d (%s): by session\n", + task_pid_nr(p), p->comm); + group_send_sig_info(SIGKILL, SEND_SIG_PRIV, p, PIDTYPE_SID); + } while_each_pid_task(session, PIDTYPE_SID, p); + + /* Now kill any processes that happen to have the tty open */ + do_each_thread(g, p) { + if (p->signal->tty == tty) { + tty_notice(tty, "SAK: killed process %d (%s): by controlling tty\n", + task_pid_nr(p), p->comm); + group_send_sig_info(SIGKILL, SEND_SIG_PRIV, p, PIDTYPE_SID); + continue; + } + task_lock(p); + i = iterate_fd(p->files, 0, this_tty, tty); + if (i != 0) { + tty_notice(tty, "SAK: killed process %d (%s): by fd#%d\n", + task_pid_nr(p), p->comm, i - 1); + group_send_sig_info(SIGKILL, SEND_SIG_PRIV, p, PIDTYPE_SID); + } + task_unlock(p); + } while_each_thread(g, p); + read_unlock(&tasklist_lock); + put_pid(session); +#endif +} + +static void do_SAK_work(struct work_struct *work) +{ + struct tty_struct *tty = + container_of(work, struct tty_struct, SAK_work); + __do_SAK(tty); +} + +/* + * The tq handling here is a little racy - tty->SAK_work may already be queued. + * Fortunately we don't need to worry, because if ->SAK_work is already queued, + * the values which we write to it will be identical to the values which it + * already has. --akpm + */ +void do_SAK(struct tty_struct *tty) +{ + if (!tty) + return; + schedule_work(&tty->SAK_work); +} + +EXPORT_SYMBOL(do_SAK); + +/* Must put_device() after it's unused! */ +static struct device *tty_get_device(struct tty_struct *tty) +{ + dev_t devt = tty_devnum(tty); + return class_find_device_by_devt(tty_class, devt); +} + + +/** + * alloc_tty_struct + * + * This subroutine allocates and initializes a tty structure. + * + * Locking: none - tty in question is not exposed at this point + */ + +struct tty_struct *alloc_tty_struct(struct tty_driver *driver, int idx) +{ + struct tty_struct *tty; + + tty = kzalloc(sizeof(*tty), GFP_KERNEL); + if (!tty) + return NULL; + + kref_init(&tty->kref); + tty->magic = TTY_MAGIC; + if (tty_ldisc_init(tty)) { + kfree(tty); + return NULL; + } + tty->session = NULL; + tty->pgrp = NULL; + mutex_init(&tty->legacy_mutex); + mutex_init(&tty->throttle_mutex); + init_rwsem(&tty->termios_rwsem); + mutex_init(&tty->winsize_mutex); + init_ldsem(&tty->ldisc_sem); + init_waitqueue_head(&tty->write_wait); + init_waitqueue_head(&tty->read_wait); + INIT_WORK(&tty->hangup_work, do_tty_hangup); + mutex_init(&tty->atomic_write_lock); + spin_lock_init(&tty->ctrl_lock); + spin_lock_init(&tty->flow_lock); + spin_lock_init(&tty->files_lock); + INIT_LIST_HEAD(&tty->tty_files); + INIT_WORK(&tty->SAK_work, do_SAK_work); + + tty->driver = driver; + tty->ops = driver->ops; + tty->index = idx; + tty_line_name(driver, idx, tty->name); + tty->dev = tty_get_device(tty); + + return tty; +} + +/** + * tty_put_char - write one character to a tty + * @tty: tty + * @ch: character + * + * Write one byte to the tty using the provided put_char method + * if present. Returns the number of characters successfully output. + * + * Note: the specific put_char operation in the driver layer may go + * away soon. Don't call it directly, use this method + */ + +int tty_put_char(struct tty_struct *tty, unsigned char ch) +{ + if (tty->ops->put_char) + return tty->ops->put_char(tty, ch); + return tty->ops->write(tty, &ch, 1); +} +EXPORT_SYMBOL_GPL(tty_put_char); + +struct class *tty_class; + +static int tty_cdev_add(struct tty_driver *driver, dev_t dev, + unsigned int index, unsigned int count) +{ + int err; + + /* init here, since reused cdevs cause crashes */ + driver->cdevs[index] = cdev_alloc(); + if (!driver->cdevs[index]) + return -ENOMEM; + driver->cdevs[index]->ops = &tty_fops; + driver->cdevs[index]->owner = driver->owner; + err = cdev_add(driver->cdevs[index], dev, count); + if (err) + kobject_put(&driver->cdevs[index]->kobj); + return err; +} + +/** + * tty_register_device - register a tty device + * @driver: the tty driver that describes the tty device + * @index: the index in the tty driver for this tty device + * @device: a struct device that is associated with this tty device. + * This field is optional, if there is no known struct device + * for this tty device it can be set to NULL safely. + * + * Returns a pointer to the struct device for this tty device + * (or ERR_PTR(-EFOO) on error). + * + * This call is required to be made to register an individual tty device + * if the tty driver's flags have the TTY_DRIVER_DYNAMIC_DEV bit set. If + * that bit is not set, this function should not be called by a tty + * driver. + * + * Locking: ?? + */ + +struct device *tty_register_device(struct tty_driver *driver, unsigned index, + struct device *device) +{ + return tty_register_device_attr(driver, index, device, NULL, NULL); +} +EXPORT_SYMBOL(tty_register_device); + +static void tty_device_create_release(struct device *dev) +{ + dev_dbg(dev, "releasing...\n"); + kfree(dev); +} + +/** + * tty_register_device_attr - register a tty device + * @driver: the tty driver that describes the tty device + * @index: the index in the tty driver for this tty device + * @device: a struct device that is associated with this tty device. + * This field is optional, if there is no known struct device + * for this tty device it can be set to NULL safely. + * @drvdata: Driver data to be set to device. + * @attr_grp: Attribute group to be set on device. + * + * Returns a pointer to the struct device for this tty device + * (or ERR_PTR(-EFOO) on error). + * + * This call is required to be made to register an individual tty device + * if the tty driver's flags have the TTY_DRIVER_DYNAMIC_DEV bit set. If + * that bit is not set, this function should not be called by a tty + * driver. + * + * Locking: ?? + */ +struct device *tty_register_device_attr(struct tty_driver *driver, + unsigned index, struct device *device, + void *drvdata, + const struct attribute_group **attr_grp) +{ + char name[64]; + dev_t devt = MKDEV(driver->major, driver->minor_start) + index; + struct ktermios *tp; + struct device *dev; + int retval; + + if (index >= driver->num) { + pr_err("%s: Attempt to register invalid tty line number (%d)\n", + driver->name, index); + return ERR_PTR(-EINVAL); + } + + if (driver->type == TTY_DRIVER_TYPE_PTY) + pty_line_name(driver, index, name); + else + tty_line_name(driver, index, name); + + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (!dev) + return ERR_PTR(-ENOMEM); + + dev->devt = devt; + dev->class = tty_class; + dev->parent = device; + dev->release = tty_device_create_release; + dev_set_name(dev, "%s", name); + dev->groups = attr_grp; + dev_set_drvdata(dev, drvdata); + + dev_set_uevent_suppress(dev, 1); + + retval = device_register(dev); + if (retval) + goto err_put; + + if (!(driver->flags & TTY_DRIVER_DYNAMIC_ALLOC)) { + /* + * Free any saved termios data so that the termios state is + * reset when reusing a minor number. + */ + tp = driver->termios[index]; + if (tp) { + driver->termios[index] = NULL; + kfree(tp); + } + + retval = tty_cdev_add(driver, devt, index, 1); + if (retval) + goto err_del; + } + + dev_set_uevent_suppress(dev, 0); + kobject_uevent(&dev->kobj, KOBJ_ADD); + + return dev; + +err_del: + device_del(dev); +err_put: + put_device(dev); + + return ERR_PTR(retval); +} +EXPORT_SYMBOL_GPL(tty_register_device_attr); + +/** + * tty_unregister_device - unregister a tty device + * @driver: the tty driver that describes the tty device + * @index: the index in the tty driver for this tty device + * + * If a tty device is registered with a call to tty_register_device() then + * this function must be called when the tty device is gone. + * + * Locking: ?? + */ + +void tty_unregister_device(struct tty_driver *driver, unsigned index) +{ + device_destroy(tty_class, + MKDEV(driver->major, driver->minor_start) + index); + if (!(driver->flags & TTY_DRIVER_DYNAMIC_ALLOC)) { + cdev_del(driver->cdevs[index]); + driver->cdevs[index] = NULL; + } +} +EXPORT_SYMBOL(tty_unregister_device); + +/** + * __tty_alloc_driver -- allocate tty driver + * @lines: count of lines this driver can handle at most + * @owner: module which is responsible for this driver + * @flags: some of TTY_DRIVER_* flags, will be set in driver->flags + * + * This should not be called directly, some of the provided macros should be + * used instead. Use IS_ERR and friends on @retval. + */ +struct tty_driver *__tty_alloc_driver(unsigned int lines, struct module *owner, + unsigned long flags) +{ + struct tty_driver *driver; + unsigned int cdevs = 1; + int err; + + if (!lines || (flags & TTY_DRIVER_UNNUMBERED_NODE && lines > 1)) + return ERR_PTR(-EINVAL); + + driver = kzalloc(sizeof(*driver), GFP_KERNEL); + if (!driver) + return ERR_PTR(-ENOMEM); + + kref_init(&driver->kref); + driver->magic = TTY_DRIVER_MAGIC; + driver->num = lines; + driver->owner = owner; + driver->flags = flags; + + if (!(flags & TTY_DRIVER_DEVPTS_MEM)) { + driver->ttys = kcalloc(lines, sizeof(*driver->ttys), + GFP_KERNEL); + driver->termios = kcalloc(lines, sizeof(*driver->termios), + GFP_KERNEL); + if (!driver->ttys || !driver->termios) { + err = -ENOMEM; + goto err_free_all; + } + } + + if (!(flags & TTY_DRIVER_DYNAMIC_ALLOC)) { + driver->ports = kcalloc(lines, sizeof(*driver->ports), + GFP_KERNEL); + if (!driver->ports) { + err = -ENOMEM; + goto err_free_all; + } + cdevs = lines; + } + + driver->cdevs = kcalloc(cdevs, sizeof(*driver->cdevs), GFP_KERNEL); + if (!driver->cdevs) { + err = -ENOMEM; + goto err_free_all; + } + + return driver; +err_free_all: + kfree(driver->ports); + kfree(driver->ttys); + kfree(driver->termios); + kfree(driver->cdevs); + kfree(driver); + return ERR_PTR(err); +} +EXPORT_SYMBOL(__tty_alloc_driver); + +static void destruct_tty_driver(struct kref *kref) +{ + struct tty_driver *driver = container_of(kref, struct tty_driver, kref); + int i; + struct ktermios *tp; + + if (driver->flags & TTY_DRIVER_INSTALLED) { + for (i = 0; i < driver->num; i++) { + tp = driver->termios[i]; + if (tp) { + driver->termios[i] = NULL; + kfree(tp); + } + if (!(driver->flags & TTY_DRIVER_DYNAMIC_DEV)) + tty_unregister_device(driver, i); + } + proc_tty_unregister_driver(driver); + if (driver->flags & TTY_DRIVER_DYNAMIC_ALLOC) + cdev_del(driver->cdevs[0]); + } + kfree(driver->cdevs); + kfree(driver->ports); + kfree(driver->termios); + kfree(driver->ttys); + kfree(driver); +} + +void tty_driver_kref_put(struct tty_driver *driver) +{ + kref_put(&driver->kref, destruct_tty_driver); +} +EXPORT_SYMBOL(tty_driver_kref_put); + +void tty_set_operations(struct tty_driver *driver, + const struct tty_operations *op) +{ + driver->ops = op; +}; +EXPORT_SYMBOL(tty_set_operations); + +void put_tty_driver(struct tty_driver *d) +{ + tty_driver_kref_put(d); +} +EXPORT_SYMBOL(put_tty_driver); + +/* + * Called by a tty driver to register itself. + */ +int tty_register_driver(struct tty_driver *driver) +{ + int error; + int i; + dev_t dev; + struct device *d; + + if (!driver->major) { + error = alloc_chrdev_region(&dev, driver->minor_start, + driver->num, driver->name); + if (!error) { + driver->major = MAJOR(dev); + driver->minor_start = MINOR(dev); + } + } else { + dev = MKDEV(driver->major, driver->minor_start); + error = register_chrdev_region(dev, driver->num, driver->name); + } + if (error < 0) + goto err; + + if (driver->flags & TTY_DRIVER_DYNAMIC_ALLOC) { + error = tty_cdev_add(driver, dev, 0, driver->num); + if (error) + goto err_unreg_char; + } + + mutex_lock(&tty_mutex); + list_add(&driver->tty_drivers, &tty_drivers); + mutex_unlock(&tty_mutex); + + if (!(driver->flags & TTY_DRIVER_DYNAMIC_DEV)) { + for (i = 0; i < driver->num; i++) { + d = tty_register_device(driver, i, NULL); + if (IS_ERR(d)) { + error = PTR_ERR(d); + goto err_unreg_devs; + } + } + } + proc_tty_register_driver(driver); + driver->flags |= TTY_DRIVER_INSTALLED; + return 0; + +err_unreg_devs: + for (i--; i >= 0; i--) + tty_unregister_device(driver, i); + + mutex_lock(&tty_mutex); + list_del(&driver->tty_drivers); + mutex_unlock(&tty_mutex); + +err_unreg_char: + unregister_chrdev_region(dev, driver->num); +err: + return error; +} +EXPORT_SYMBOL(tty_register_driver); + +/* + * Called by a tty driver to unregister itself. + */ +int tty_unregister_driver(struct tty_driver *driver) +{ +#if 0 + /* FIXME */ + if (driver->refcount) + return -EBUSY; +#endif + unregister_chrdev_region(MKDEV(driver->major, driver->minor_start), + driver->num); + mutex_lock(&tty_mutex); + list_del(&driver->tty_drivers); + mutex_unlock(&tty_mutex); + return 0; +} + +EXPORT_SYMBOL(tty_unregister_driver); + +dev_t tty_devnum(struct tty_struct *tty) +{ + return MKDEV(tty->driver->major, tty->driver->minor_start) + tty->index; +} +EXPORT_SYMBOL(tty_devnum); + +void tty_default_fops(struct file_operations *fops) +{ + *fops = tty_fops; +} + +static char *tty_devnode(struct device *dev, umode_t *mode) +{ + if (!mode) + return NULL; + if (dev->devt == MKDEV(TTYAUX_MAJOR, 0) || + dev->devt == MKDEV(TTYAUX_MAJOR, 2)) + *mode = 0666; + return NULL; +} + +static int __init tty_class_init(void) +{ + tty_class = class_create(THIS_MODULE, "tty"); + if (IS_ERR(tty_class)) + return PTR_ERR(tty_class); + tty_class->devnode = tty_devnode; + return 0; +} + +postcore_initcall(tty_class_init); + +/* 3/2004 jmc: why do these devices exist? */ +static struct cdev tty_cdev, console_cdev; + +static ssize_t show_cons_active(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct console *cs[16]; + int i = 0; + struct console *c; + ssize_t count = 0; + + console_lock(); + for_each_console(c) { + if (!c->device) + continue; + if (!c->write) + continue; + if ((c->flags & CON_ENABLED) == 0) + continue; + cs[i++] = c; + if (i >= ARRAY_SIZE(cs)) + break; + } + while (i--) { + int index = cs[i]->index; + struct tty_driver *drv = cs[i]->device(cs[i], &index); + + /* don't resolve tty0 as some programs depend on it */ + if (drv && (cs[i]->index > 0 || drv->major != TTY_MAJOR)) + count += tty_line_name(drv, index, buf + count); + else + count += sprintf(buf + count, "%s%d", + cs[i]->name, cs[i]->index); + + count += sprintf(buf + count, "%c", i ? ' ':'\n'); + } + console_unlock(); + + return count; +} +static DEVICE_ATTR(active, S_IRUGO, show_cons_active, NULL); + +static struct attribute *cons_dev_attrs[] = { + &dev_attr_active.attr, + NULL +}; + +ATTRIBUTE_GROUPS(cons_dev); + +static struct device *consdev; + +void console_sysfs_notify(void) +{ + if (consdev) + sysfs_notify(&consdev->kobj, NULL, "active"); +} + +/* + * Ok, now we can initialize the rest of the tty devices and can count + * on memory allocations, interrupts etc.. + */ +int __init tty_init(void) +{ + tty_sysctl_init(); + cdev_init(&tty_cdev, &tty_fops); + if (cdev_add(&tty_cdev, MKDEV(TTYAUX_MAJOR, 0), 1) || + register_chrdev_region(MKDEV(TTYAUX_MAJOR, 0), 1, "/dev/tty") < 0) + panic("Couldn't register /dev/tty driver\n"); + device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 0), NULL, "tty"); + + cdev_init(&console_cdev, &console_fops); + if (cdev_add(&console_cdev, MKDEV(TTYAUX_MAJOR, 1), 1) || + register_chrdev_region(MKDEV(TTYAUX_MAJOR, 1), 1, "/dev/console") < 0) + panic("Couldn't register /dev/console driver\n"); + consdev = device_create_with_groups(tty_class, NULL, + MKDEV(TTYAUX_MAJOR, 1), NULL, + cons_dev_groups, "console"); + if (IS_ERR(consdev)) + consdev = NULL; + +#ifdef CONFIG_VT + vty_init(&console_fops); +#endif + return 0; +} + diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c new file mode 100644 index 000000000..12a30329a --- /dev/null +++ b/drivers/tty/tty_ioctl.c @@ -0,0 +1,908 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds + * + * Modified by Fred N. van Kempen, 01/29/93, to add line disciplines + * which can be dynamically activated and de-activated by the line + * discipline handling modules (like SLIP). + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "tty.h" + +#include +#include + +#undef TTY_DEBUG_WAIT_UNTIL_SENT + +#ifdef TTY_DEBUG_WAIT_UNTIL_SENT +# define tty_debug_wait_until_sent(tty, f, args...) tty_debug(tty, f, ##args) +#else +# define tty_debug_wait_until_sent(tty, f, args...) do {} while (0) +#endif + +#undef DEBUG + +/* + * Internal flag options for termios setting behavior + */ +#define TERMIOS_FLUSH 1 +#define TERMIOS_WAIT 2 +#define TERMIOS_TERMIO 4 +#define TERMIOS_OLD 8 + + +/** + * tty_chars_in_buffer - characters pending + * @tty: terminal + * + * Return the number of bytes of data in the device private + * output queue. If no private method is supplied there is assumed + * to be no queue on the device. + */ + +int tty_chars_in_buffer(struct tty_struct *tty) +{ + if (tty->ops->chars_in_buffer) + return tty->ops->chars_in_buffer(tty); + else + return 0; +} +EXPORT_SYMBOL(tty_chars_in_buffer); + +/** + * tty_write_room - write queue space + * @tty: terminal + * + * Return the number of bytes that can be queued to this device + * at the present time. The result should be treated as a guarantee + * and the driver cannot offer a value it later shrinks by more than + * the number of bytes written. If no method is provided 2K is always + * returned and data may be lost as there will be no flow control. + */ + +int tty_write_room(struct tty_struct *tty) +{ + if (tty->ops->write_room) + return tty->ops->write_room(tty); + return 2048; +} +EXPORT_SYMBOL(tty_write_room); + +/** + * tty_driver_flush_buffer - discard internal buffer + * @tty: terminal + * + * Discard the internal output buffer for this device. If no method + * is provided then either the buffer cannot be hardware flushed or + * there is no buffer driver side. + */ +void tty_driver_flush_buffer(struct tty_struct *tty) +{ + if (tty->ops->flush_buffer) + tty->ops->flush_buffer(tty); +} +EXPORT_SYMBOL(tty_driver_flush_buffer); + +/** + * tty_throttle - flow control + * @tty: terminal + * + * Indicate that a tty should stop transmitting data down the stack. + * Takes the termios rwsem to protect against parallel throttle/unthrottle + * and also to ensure the driver can consistently reference its own + * termios data at this point when implementing software flow control. + */ + +void tty_throttle(struct tty_struct *tty) +{ + down_write(&tty->termios_rwsem); + /* check TTY_THROTTLED first so it indicates our state */ + if (!test_and_set_bit(TTY_THROTTLED, &tty->flags) && + tty->ops->throttle) + tty->ops->throttle(tty); + tty->flow_change = 0; + up_write(&tty->termios_rwsem); +} +EXPORT_SYMBOL(tty_throttle); + +/** + * tty_unthrottle - flow control + * @tty: terminal + * + * Indicate that a tty may continue transmitting data down the stack. + * Takes the termios rwsem to protect against parallel throttle/unthrottle + * and also to ensure the driver can consistently reference its own + * termios data at this point when implementing software flow control. + * + * Drivers should however remember that the stack can issue a throttle, + * then change flow control method, then unthrottle. + */ + +void tty_unthrottle(struct tty_struct *tty) +{ + down_write(&tty->termios_rwsem); + if (test_and_clear_bit(TTY_THROTTLED, &tty->flags) && + tty->ops->unthrottle) + tty->ops->unthrottle(tty); + tty->flow_change = 0; + up_write(&tty->termios_rwsem); +} +EXPORT_SYMBOL(tty_unthrottle); + +/** + * tty_throttle_safe - flow control + * @tty: terminal + * + * Similar to tty_throttle() but will only attempt throttle + * if tty->flow_change is TTY_THROTTLE_SAFE. Prevents an accidental + * throttle due to race conditions when throttling is conditional + * on factors evaluated prior to throttling. + * + * Returns 0 if tty is throttled (or was already throttled) + */ + +int tty_throttle_safe(struct tty_struct *tty) +{ + int ret = 0; + + mutex_lock(&tty->throttle_mutex); + if (!tty_throttled(tty)) { + if (tty->flow_change != TTY_THROTTLE_SAFE) + ret = 1; + else { + set_bit(TTY_THROTTLED, &tty->flags); + if (tty->ops->throttle) + tty->ops->throttle(tty); + } + } + mutex_unlock(&tty->throttle_mutex); + + return ret; +} + +/** + * tty_unthrottle_safe - flow control + * @tty: terminal + * + * Similar to tty_unthrottle() but will only attempt unthrottle + * if tty->flow_change is TTY_UNTHROTTLE_SAFE. Prevents an accidental + * unthrottle due to race conditions when unthrottling is conditional + * on factors evaluated prior to unthrottling. + * + * Returns 0 if tty is unthrottled (or was already unthrottled) + */ + +int tty_unthrottle_safe(struct tty_struct *tty) +{ + int ret = 0; + + mutex_lock(&tty->throttle_mutex); + if (tty_throttled(tty)) { + if (tty->flow_change != TTY_UNTHROTTLE_SAFE) + ret = 1; + else { + clear_bit(TTY_THROTTLED, &tty->flags); + if (tty->ops->unthrottle) + tty->ops->unthrottle(tty); + } + } + mutex_unlock(&tty->throttle_mutex); + + return ret; +} + +/** + * tty_wait_until_sent - wait for I/O to finish + * @tty: tty we are waiting for + * @timeout: how long we will wait + * + * Wait for characters pending in a tty driver to hit the wire, or + * for a timeout to occur (eg due to flow control) + * + * Locking: none + */ + +void tty_wait_until_sent(struct tty_struct *tty, long timeout) +{ + tty_debug_wait_until_sent(tty, "wait until sent, timeout=%ld\n", timeout); + + if (!timeout) + timeout = MAX_SCHEDULE_TIMEOUT; + + timeout = wait_event_interruptible_timeout(tty->write_wait, + !tty_chars_in_buffer(tty), timeout); + if (timeout <= 0) + return; + + if (timeout == MAX_SCHEDULE_TIMEOUT) + timeout = 0; + + if (tty->ops->wait_until_sent) + tty->ops->wait_until_sent(tty, timeout); +} +EXPORT_SYMBOL(tty_wait_until_sent); + + +/* + * Termios Helper Methods + */ + +static void unset_locked_termios(struct tty_struct *tty, struct ktermios *old) +{ + struct ktermios *termios = &tty->termios; + struct ktermios *locked = &tty->termios_locked; + int i; + +#define NOSET_MASK(x, y, z) (x = ((x) & ~(z)) | ((y) & (z))) + + NOSET_MASK(termios->c_iflag, old->c_iflag, locked->c_iflag); + NOSET_MASK(termios->c_oflag, old->c_oflag, locked->c_oflag); + NOSET_MASK(termios->c_cflag, old->c_cflag, locked->c_cflag); + NOSET_MASK(termios->c_lflag, old->c_lflag, locked->c_lflag); + termios->c_line = locked->c_line ? old->c_line : termios->c_line; + for (i = 0; i < NCCS; i++) + termios->c_cc[i] = locked->c_cc[i] ? + old->c_cc[i] : termios->c_cc[i]; + /* FIXME: What should we do for i/ospeed */ +} + +/** + * tty_termios_copy_hw - copy hardware settings + * @new: New termios + * @old: Old termios + * + * Propagate the hardware specific terminal setting bits from + * the old termios structure to the new one. This is used in cases + * where the hardware does not support reconfiguration or as a helper + * in some cases where only minimal reconfiguration is supported + */ + +void tty_termios_copy_hw(struct ktermios *new, struct ktermios *old) +{ + /* The bits a dumb device handles in software. Smart devices need + to always provide a set_termios method */ + new->c_cflag &= HUPCL | CREAD | CLOCAL; + new->c_cflag |= old->c_cflag & ~(HUPCL | CREAD | CLOCAL); + new->c_ispeed = old->c_ispeed; + new->c_ospeed = old->c_ospeed; +} +EXPORT_SYMBOL(tty_termios_copy_hw); + +/** + * tty_termios_hw_change - check for setting change + * @a: termios + * @b: termios to compare + * + * Check if any of the bits that affect a dumb device have changed + * between the two termios structures, or a speed change is needed. + */ + +int tty_termios_hw_change(const struct ktermios *a, const struct ktermios *b) +{ + if (a->c_ispeed != b->c_ispeed || a->c_ospeed != b->c_ospeed) + return 1; + if ((a->c_cflag ^ b->c_cflag) & ~(HUPCL | CREAD | CLOCAL)) + return 1; + return 0; +} +EXPORT_SYMBOL(tty_termios_hw_change); + +/** + * tty_set_termios - update termios values + * @tty: tty to update + * @new_termios: desired new value + * + * Perform updates to the termios values set on this terminal. + * A master pty's termios should never be set. + * + * Locking: termios_rwsem + */ + +int tty_set_termios(struct tty_struct *tty, struct ktermios *new_termios) +{ + struct ktermios old_termios; + struct tty_ldisc *ld; + + WARN_ON(tty->driver->type == TTY_DRIVER_TYPE_PTY && + tty->driver->subtype == PTY_TYPE_MASTER); + /* + * Perform the actual termios internal changes under lock. + */ + + + /* FIXME: we need to decide on some locking/ordering semantics + for the set_termios notification eventually */ + down_write(&tty->termios_rwsem); + old_termios = tty->termios; + tty->termios = *new_termios; + unset_locked_termios(tty, &old_termios); + + if (tty->ops->set_termios) + tty->ops->set_termios(tty, &old_termios); + else + tty_termios_copy_hw(&tty->termios, &old_termios); + + ld = tty_ldisc_ref(tty); + if (ld != NULL) { + if (ld->ops->set_termios) + ld->ops->set_termios(tty, &old_termios); + tty_ldisc_deref(ld); + } + up_write(&tty->termios_rwsem); + return 0; +} +EXPORT_SYMBOL_GPL(tty_set_termios); + +/** + * set_termios - set termios values for a tty + * @tty: terminal device + * @arg: user data + * @opt: option information + * + * Helper function to prepare termios data and run necessary other + * functions before using tty_set_termios to do the actual changes. + * + * Locking: + * Called functions take ldisc and termios_rwsem locks + */ + +static int set_termios(struct tty_struct *tty, void __user *arg, int opt) +{ + struct ktermios tmp_termios; + struct tty_ldisc *ld; + int retval = tty_check_change(tty); + + if (retval) + return retval; + + down_read(&tty->termios_rwsem); + tmp_termios = tty->termios; + up_read(&tty->termios_rwsem); + + if (opt & TERMIOS_TERMIO) { + if (user_termio_to_kernel_termios(&tmp_termios, + (struct termio __user *)arg)) + return -EFAULT; +#ifdef TCGETS2 + } else if (opt & TERMIOS_OLD) { + if (user_termios_to_kernel_termios_1(&tmp_termios, + (struct termios __user *)arg)) + return -EFAULT; + } else { + if (user_termios_to_kernel_termios(&tmp_termios, + (struct termios2 __user *)arg)) + return -EFAULT; + } +#else + } else if (user_termios_to_kernel_termios(&tmp_termios, + (struct termios __user *)arg)) + return -EFAULT; +#endif + + /* If old style Bfoo values are used then load c_ispeed/c_ospeed + * with the real speed so its unconditionally usable */ + tmp_termios.c_ispeed = tty_termios_input_baud_rate(&tmp_termios); + tmp_termios.c_ospeed = tty_termios_baud_rate(&tmp_termios); + + if (opt & (TERMIOS_FLUSH|TERMIOS_WAIT)) { +retry_write_wait: + retval = wait_event_interruptible(tty->write_wait, !tty_chars_in_buffer(tty)); + if (retval < 0) + return retval; + + if (tty_write_lock(tty, false) < 0) + goto retry_write_wait; + + /* Racing writer? */ + if (tty_chars_in_buffer(tty)) { + tty_write_unlock(tty); + goto retry_write_wait; + } + + ld = tty_ldisc_ref(tty); + if (ld != NULL) { + if ((opt & TERMIOS_FLUSH) && ld->ops->flush_buffer) + ld->ops->flush_buffer(tty); + tty_ldisc_deref(ld); + } + + if ((opt & TERMIOS_WAIT) && tty->ops->wait_until_sent) { + tty->ops->wait_until_sent(tty, 0); + if (signal_pending(current)) { + tty_write_unlock(tty); + return -ERESTARTSYS; + } + } + + tty_set_termios(tty, &tmp_termios); + + tty_write_unlock(tty); + } else { + tty_set_termios(tty, &tmp_termios); + } + + /* FIXME: Arguably if tmp_termios == tty->termios AND the + actual requested termios was not tmp_termios then we may + want to return an error as no user requested change has + succeeded */ + return 0; +} + +static void copy_termios(struct tty_struct *tty, struct ktermios *kterm) +{ + down_read(&tty->termios_rwsem); + *kterm = tty->termios; + up_read(&tty->termios_rwsem); +} + +static void copy_termios_locked(struct tty_struct *tty, struct ktermios *kterm) +{ + down_read(&tty->termios_rwsem); + *kterm = tty->termios_locked; + up_read(&tty->termios_rwsem); +} + +static int get_termio(struct tty_struct *tty, struct termio __user *termio) +{ + struct ktermios kterm; + copy_termios(tty, &kterm); + if (kernel_termios_to_user_termio(termio, &kterm)) + return -EFAULT; + return 0; +} + +#ifdef TIOCGETP +/* + * These are deprecated, but there is limited support.. + * + * The "sg_flags" translation is a joke.. + */ +static int get_sgflags(struct tty_struct *tty) +{ + int flags = 0; + + if (!L_ICANON(tty)) { + if (L_ISIG(tty)) + flags |= 0x02; /* cbreak */ + else + flags |= 0x20; /* raw */ + } + if (L_ECHO(tty)) + flags |= 0x08; /* echo */ + if (O_OPOST(tty)) + if (O_ONLCR(tty)) + flags |= 0x10; /* crmod */ + return flags; +} + +static int get_sgttyb(struct tty_struct *tty, struct sgttyb __user *sgttyb) +{ + struct sgttyb tmp; + + down_read(&tty->termios_rwsem); + tmp.sg_ispeed = tty->termios.c_ispeed; + tmp.sg_ospeed = tty->termios.c_ospeed; + tmp.sg_erase = tty->termios.c_cc[VERASE]; + tmp.sg_kill = tty->termios.c_cc[VKILL]; + tmp.sg_flags = get_sgflags(tty); + up_read(&tty->termios_rwsem); + + return copy_to_user(sgttyb, &tmp, sizeof(tmp)) ? -EFAULT : 0; +} + +static void set_sgflags(struct ktermios *termios, int flags) +{ + termios->c_iflag = ICRNL | IXON; + termios->c_oflag = 0; + termios->c_lflag = ISIG | ICANON; + if (flags & 0x02) { /* cbreak */ + termios->c_iflag = 0; + termios->c_lflag &= ~ICANON; + } + if (flags & 0x08) { /* echo */ + termios->c_lflag |= ECHO | ECHOE | ECHOK | + ECHOCTL | ECHOKE | IEXTEN; + } + if (flags & 0x10) { /* crmod */ + termios->c_oflag |= OPOST | ONLCR; + } + if (flags & 0x20) { /* raw */ + termios->c_iflag = 0; + termios->c_lflag &= ~(ISIG | ICANON); + } + if (!(termios->c_lflag & ICANON)) { + termios->c_cc[VMIN] = 1; + termios->c_cc[VTIME] = 0; + } +} + +/** + * set_sgttyb - set legacy terminal values + * @tty: tty structure + * @sgttyb: pointer to old style terminal structure + * + * Updates a terminal from the legacy BSD style terminal information + * structure. + * + * Locking: termios_rwsem + */ + +static int set_sgttyb(struct tty_struct *tty, struct sgttyb __user *sgttyb) +{ + int retval; + struct sgttyb tmp; + struct ktermios termios; + + retval = tty_check_change(tty); + if (retval) + return retval; + + if (copy_from_user(&tmp, sgttyb, sizeof(tmp))) + return -EFAULT; + + down_write(&tty->termios_rwsem); + termios = tty->termios; + termios.c_cc[VERASE] = tmp.sg_erase; + termios.c_cc[VKILL] = tmp.sg_kill; + set_sgflags(&termios, tmp.sg_flags); + /* Try and encode into Bfoo format */ +#ifdef BOTHER + tty_termios_encode_baud_rate(&termios, termios.c_ispeed, + termios.c_ospeed); +#endif + up_write(&tty->termios_rwsem); + tty_set_termios(tty, &termios); + return 0; +} +#endif + +#ifdef TIOCGETC +static int get_tchars(struct tty_struct *tty, struct tchars __user *tchars) +{ + struct tchars tmp; + + down_read(&tty->termios_rwsem); + tmp.t_intrc = tty->termios.c_cc[VINTR]; + tmp.t_quitc = tty->termios.c_cc[VQUIT]; + tmp.t_startc = tty->termios.c_cc[VSTART]; + tmp.t_stopc = tty->termios.c_cc[VSTOP]; + tmp.t_eofc = tty->termios.c_cc[VEOF]; + tmp.t_brkc = tty->termios.c_cc[VEOL2]; /* what is brkc anyway? */ + up_read(&tty->termios_rwsem); + return copy_to_user(tchars, &tmp, sizeof(tmp)) ? -EFAULT : 0; +} + +static int set_tchars(struct tty_struct *tty, struct tchars __user *tchars) +{ + struct tchars tmp; + + if (copy_from_user(&tmp, tchars, sizeof(tmp))) + return -EFAULT; + down_write(&tty->termios_rwsem); + tty->termios.c_cc[VINTR] = tmp.t_intrc; + tty->termios.c_cc[VQUIT] = tmp.t_quitc; + tty->termios.c_cc[VSTART] = tmp.t_startc; + tty->termios.c_cc[VSTOP] = tmp.t_stopc; + tty->termios.c_cc[VEOF] = tmp.t_eofc; + tty->termios.c_cc[VEOL2] = tmp.t_brkc; /* what is brkc anyway? */ + up_write(&tty->termios_rwsem); + return 0; +} +#endif + +#ifdef TIOCGLTC +static int get_ltchars(struct tty_struct *tty, struct ltchars __user *ltchars) +{ + struct ltchars tmp; + + down_read(&tty->termios_rwsem); + tmp.t_suspc = tty->termios.c_cc[VSUSP]; + /* what is dsuspc anyway? */ + tmp.t_dsuspc = tty->termios.c_cc[VSUSP]; + tmp.t_rprntc = tty->termios.c_cc[VREPRINT]; + /* what is flushc anyway? */ + tmp.t_flushc = tty->termios.c_cc[VEOL2]; + tmp.t_werasc = tty->termios.c_cc[VWERASE]; + tmp.t_lnextc = tty->termios.c_cc[VLNEXT]; + up_read(&tty->termios_rwsem); + return copy_to_user(ltchars, &tmp, sizeof(tmp)) ? -EFAULT : 0; +} + +static int set_ltchars(struct tty_struct *tty, struct ltchars __user *ltchars) +{ + struct ltchars tmp; + + if (copy_from_user(&tmp, ltchars, sizeof(tmp))) + return -EFAULT; + + down_write(&tty->termios_rwsem); + tty->termios.c_cc[VSUSP] = tmp.t_suspc; + /* what is dsuspc anyway? */ + tty->termios.c_cc[VEOL2] = tmp.t_dsuspc; + tty->termios.c_cc[VREPRINT] = tmp.t_rprntc; + /* what is flushc anyway? */ + tty->termios.c_cc[VEOL2] = tmp.t_flushc; + tty->termios.c_cc[VWERASE] = tmp.t_werasc; + tty->termios.c_cc[VLNEXT] = tmp.t_lnextc; + up_write(&tty->termios_rwsem); + return 0; +} +#endif + +/** + * tty_change_softcar - carrier change ioctl helper + * @tty: tty to update + * @arg: enable/disable CLOCAL + * + * Perform a change to the CLOCAL state and call into the driver + * layer to make it visible. All done with the termios rwsem + */ + +static int tty_change_softcar(struct tty_struct *tty, int arg) +{ + int ret = 0; + int bit = arg ? CLOCAL : 0; + struct ktermios old; + + down_write(&tty->termios_rwsem); + old = tty->termios; + tty->termios.c_cflag &= ~CLOCAL; + tty->termios.c_cflag |= bit; + if (tty->ops->set_termios) + tty->ops->set_termios(tty, &old); + if (C_CLOCAL(tty) != bit) + ret = -EINVAL; + up_write(&tty->termios_rwsem); + return ret; +} + +/** + * tty_mode_ioctl - mode related ioctls + * @tty: tty for the ioctl + * @file: file pointer for the tty + * @cmd: command + * @arg: ioctl argument + * + * Perform non line discipline specific mode control ioctls. This + * is designed to be called by line disciplines to ensure they provide + * consistent mode setting. + */ + +int tty_mode_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct tty_struct *real_tty; + void __user *p = (void __user *)arg; + int ret = 0; + struct ktermios kterm; + + BUG_ON(file == NULL); + + if (tty->driver->type == TTY_DRIVER_TYPE_PTY && + tty->driver->subtype == PTY_TYPE_MASTER) + real_tty = tty->link; + else + real_tty = tty; + + switch (cmd) { +#ifdef TIOCGETP + case TIOCGETP: + return get_sgttyb(real_tty, (struct sgttyb __user *) arg); + case TIOCSETP: + case TIOCSETN: + return set_sgttyb(real_tty, (struct sgttyb __user *) arg); +#endif +#ifdef TIOCGETC + case TIOCGETC: + return get_tchars(real_tty, p); + case TIOCSETC: + return set_tchars(real_tty, p); +#endif +#ifdef TIOCGLTC + case TIOCGLTC: + return get_ltchars(real_tty, p); + case TIOCSLTC: + return set_ltchars(real_tty, p); +#endif + case TCSETSF: + return set_termios(real_tty, p, TERMIOS_FLUSH | TERMIOS_WAIT | TERMIOS_OLD); + case TCSETSW: + return set_termios(real_tty, p, TERMIOS_WAIT | TERMIOS_OLD); + case TCSETS: + return set_termios(real_tty, p, TERMIOS_OLD); +#ifndef TCGETS2 + case TCGETS: + copy_termios(real_tty, &kterm); + if (kernel_termios_to_user_termios((struct termios __user *)arg, &kterm)) + ret = -EFAULT; + return ret; +#else + case TCGETS: + copy_termios(real_tty, &kterm); + if (kernel_termios_to_user_termios_1((struct termios __user *)arg, &kterm)) + ret = -EFAULT; + return ret; + case TCGETS2: + copy_termios(real_tty, &kterm); + if (kernel_termios_to_user_termios((struct termios2 __user *)arg, &kterm)) + ret = -EFAULT; + return ret; + case TCSETSF2: + return set_termios(real_tty, p, TERMIOS_FLUSH | TERMIOS_WAIT); + case TCSETSW2: + return set_termios(real_tty, p, TERMIOS_WAIT); + case TCSETS2: + return set_termios(real_tty, p, 0); +#endif + case TCGETA: + return get_termio(real_tty, p); + case TCSETAF: + return set_termios(real_tty, p, TERMIOS_FLUSH | TERMIOS_WAIT | TERMIOS_TERMIO); + case TCSETAW: + return set_termios(real_tty, p, TERMIOS_WAIT | TERMIOS_TERMIO); + case TCSETA: + return set_termios(real_tty, p, TERMIOS_TERMIO); +#ifndef TCGETS2 + case TIOCGLCKTRMIOS: + copy_termios_locked(real_tty, &kterm); + if (kernel_termios_to_user_termios((struct termios __user *)arg, &kterm)) + ret = -EFAULT; + return ret; + case TIOCSLCKTRMIOS: + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + copy_termios_locked(real_tty, &kterm); + if (user_termios_to_kernel_termios(&kterm, + (struct termios __user *) arg)) + return -EFAULT; + down_write(&real_tty->termios_rwsem); + real_tty->termios_locked = kterm; + up_write(&real_tty->termios_rwsem); + return 0; +#else + case TIOCGLCKTRMIOS: + copy_termios_locked(real_tty, &kterm); + if (kernel_termios_to_user_termios_1((struct termios __user *)arg, &kterm)) + ret = -EFAULT; + return ret; + case TIOCSLCKTRMIOS: + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + copy_termios_locked(real_tty, &kterm); + if (user_termios_to_kernel_termios_1(&kterm, + (struct termios __user *) arg)) + return -EFAULT; + down_write(&real_tty->termios_rwsem); + real_tty->termios_locked = kterm; + up_write(&real_tty->termios_rwsem); + return ret; +#endif +#ifdef TCGETX + case TCGETX: + case TCSETX: + case TCSETXW: + case TCSETXF: + return -ENOTTY; +#endif + case TIOCGSOFTCAR: + copy_termios(real_tty, &kterm); + ret = put_user((kterm.c_cflag & CLOCAL) ? 1 : 0, + (int __user *)arg); + return ret; + case TIOCSSOFTCAR: + if (get_user(arg, (unsigned int __user *) arg)) + return -EFAULT; + return tty_change_softcar(real_tty, arg); + default: + return -ENOIOCTLCMD; + } +} +EXPORT_SYMBOL_GPL(tty_mode_ioctl); + + +/* Caller guarantees ldisc reference is held */ +static int __tty_perform_flush(struct tty_struct *tty, unsigned long arg) +{ + struct tty_ldisc *ld = tty->ldisc; + + switch (arg) { + case TCIFLUSH: + if (ld && ld->ops->flush_buffer) { + ld->ops->flush_buffer(tty); + tty_unthrottle(tty); + } + break; + case TCIOFLUSH: + if (ld && ld->ops->flush_buffer) { + ld->ops->flush_buffer(tty); + tty_unthrottle(tty); + } + fallthrough; + case TCOFLUSH: + tty_driver_flush_buffer(tty); + break; + default: + return -EINVAL; + } + return 0; +} + +int tty_perform_flush(struct tty_struct *tty, unsigned long arg) +{ + struct tty_ldisc *ld; + int retval = tty_check_change(tty); + if (retval) + return retval; + + ld = tty_ldisc_ref_wait(tty); + retval = __tty_perform_flush(tty, arg); + if (ld) + tty_ldisc_deref(ld); + return retval; +} +EXPORT_SYMBOL_GPL(tty_perform_flush); + +int n_tty_ioctl_helper(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) +{ + int retval; + + switch (cmd) { + case TCXONC: + retval = tty_check_change(tty); + if (retval) + return retval; + switch (arg) { + case TCOOFF: + spin_lock_irq(&tty->flow_lock); + if (!tty->flow_stopped) { + tty->flow_stopped = 1; + __stop_tty(tty); + } + spin_unlock_irq(&tty->flow_lock); + break; + case TCOON: + spin_lock_irq(&tty->flow_lock); + if (tty->flow_stopped) { + tty->flow_stopped = 0; + __start_tty(tty); + } + spin_unlock_irq(&tty->flow_lock); + break; + case TCIOFF: + if (STOP_CHAR(tty) != __DISABLED_CHAR) + retval = tty_send_xchar(tty, STOP_CHAR(tty)); + break; + case TCION: + if (START_CHAR(tty) != __DISABLED_CHAR) + retval = tty_send_xchar(tty, START_CHAR(tty)); + break; + default: + return -EINVAL; + } + return retval; + case TCFLSH: + retval = tty_check_change(tty); + if (retval) + return retval; + return __tty_perform_flush(tty, arg); + default: + /* Try the mode commands */ + return tty_mode_ioctl(tty, file, cmd, arg); + } +} +EXPORT_SYMBOL(n_tty_ioctl_helper); diff --git a/drivers/tty/tty_jobctrl.c b/drivers/tty/tty_jobctrl.c new file mode 100644 index 000000000..a27d02187 --- /dev/null +++ b/drivers/tty/tty_jobctrl.c @@ -0,0 +1,579 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 1991, 1992 Linus Torvalds + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "tty.h" + +static int is_ignored(int sig) +{ + return (sigismember(¤t->blocked, sig) || + current->sighand->action[sig-1].sa.sa_handler == SIG_IGN); +} + +/** + * tty_check_change - check for POSIX terminal changes + * @tty: tty to check + * + * If we try to write to, or set the state of, a terminal and we're + * not in the foreground, send a SIGTTOU. If the signal is blocked or + * ignored, go ahead and perform the operation. (POSIX 7.2) + * + * Locking: ctrl_lock + */ +int __tty_check_change(struct tty_struct *tty, int sig) +{ + unsigned long flags; + struct pid *pgrp, *tty_pgrp; + int ret = 0; + + if (current->signal->tty != tty) + return 0; + + rcu_read_lock(); + pgrp = task_pgrp(current); + + spin_lock_irqsave(&tty->ctrl_lock, flags); + tty_pgrp = tty->pgrp; + spin_unlock_irqrestore(&tty->ctrl_lock, flags); + + if (tty_pgrp && pgrp != tty_pgrp) { + if (is_ignored(sig)) { + if (sig == SIGTTIN) + ret = -EIO; + } else if (is_current_pgrp_orphaned()) + ret = -EIO; + else { + kill_pgrp(pgrp, sig, 1); + set_thread_flag(TIF_SIGPENDING); + ret = -ERESTARTSYS; + } + } + rcu_read_unlock(); + + if (!tty_pgrp) + tty_warn(tty, "sig=%d, tty->pgrp == NULL!\n", sig); + + return ret; +} + +int tty_check_change(struct tty_struct *tty) +{ + return __tty_check_change(tty, SIGTTOU); +} +EXPORT_SYMBOL(tty_check_change); + +void proc_clear_tty(struct task_struct *p) +{ + unsigned long flags; + struct tty_struct *tty; + spin_lock_irqsave(&p->sighand->siglock, flags); + tty = p->signal->tty; + p->signal->tty = NULL; + spin_unlock_irqrestore(&p->sighand->siglock, flags); + tty_kref_put(tty); +} + +/** + * proc_set_tty - set the controlling terminal + * + * Only callable by the session leader and only if it does not already have + * a controlling terminal. + * + * Caller must hold: tty_lock() + * a readlock on tasklist_lock + * sighand lock + */ +static void __proc_set_tty(struct tty_struct *tty) +{ + unsigned long flags; + + spin_lock_irqsave(&tty->ctrl_lock, flags); + /* + * The session and fg pgrp references will be non-NULL if + * tiocsctty() is stealing the controlling tty + */ + put_pid(tty->session); + put_pid(tty->pgrp); + tty->pgrp = get_pid(task_pgrp(current)); + tty->session = get_pid(task_session(current)); + spin_unlock_irqrestore(&tty->ctrl_lock, flags); + if (current->signal->tty) { + tty_debug(tty, "current tty %s not NULL!!\n", + current->signal->tty->name); + tty_kref_put(current->signal->tty); + } + put_pid(current->signal->tty_old_pgrp); + current->signal->tty = tty_kref_get(tty); + current->signal->tty_old_pgrp = NULL; +} + +static void proc_set_tty(struct tty_struct *tty) +{ + spin_lock_irq(¤t->sighand->siglock); + __proc_set_tty(tty); + spin_unlock_irq(¤t->sighand->siglock); +} + +/* + * Called by tty_open() to set the controlling tty if applicable. + */ +void tty_open_proc_set_tty(struct file *filp, struct tty_struct *tty) +{ + read_lock(&tasklist_lock); + spin_lock_irq(¤t->sighand->siglock); + if (current->signal->leader && + !current->signal->tty && + tty->session == NULL) { + /* + * Don't let a process that only has write access to the tty + * obtain the privileges associated with having a tty as + * controlling terminal (being able to reopen it with full + * access through /dev/tty, being able to perform pushback). + * Many distributions set the group of all ttys to "tty" and + * grant write-only access to all terminals for setgid tty + * binaries, which should not imply full privileges on all ttys. + * + * This could theoretically break old code that performs open() + * on a write-only file descriptor. In that case, it might be + * necessary to also permit this if + * inode_permission(inode, MAY_READ) == 0. + */ + if (filp->f_mode & FMODE_READ) + __proc_set_tty(tty); + } + spin_unlock_irq(¤t->sighand->siglock); + read_unlock(&tasklist_lock); +} + +struct tty_struct *get_current_tty(void) +{ + struct tty_struct *tty; + unsigned long flags; + + spin_lock_irqsave(¤t->sighand->siglock, flags); + tty = tty_kref_get(current->signal->tty); + spin_unlock_irqrestore(¤t->sighand->siglock, flags); + return tty; +} +EXPORT_SYMBOL_GPL(get_current_tty); + +/* + * Called from tty_release(). + */ +void session_clear_tty(struct pid *session) +{ + struct task_struct *p; + do_each_pid_task(session, PIDTYPE_SID, p) { + proc_clear_tty(p); + } while_each_pid_task(session, PIDTYPE_SID, p); +} + +/** + * tty_signal_session_leader - sends SIGHUP to session leader + * @tty: controlling tty + * @exit_session: if non-zero, signal all foreground group processes + * + * Send SIGHUP and SIGCONT to the session leader and its process group. + * Optionally, signal all processes in the foreground process group. + * + * Returns the number of processes in the session with this tty + * as their controlling terminal. This value is used to drop + * tty references for those processes. + */ +int tty_signal_session_leader(struct tty_struct *tty, int exit_session) +{ + struct task_struct *p; + int refs = 0; + struct pid *tty_pgrp = NULL; + + read_lock(&tasklist_lock); + if (tty->session) { + do_each_pid_task(tty->session, PIDTYPE_SID, p) { + spin_lock_irq(&p->sighand->siglock); + if (p->signal->tty == tty) { + p->signal->tty = NULL; + /* We defer the dereferences outside fo + the tasklist lock */ + refs++; + } + if (!p->signal->leader) { + spin_unlock_irq(&p->sighand->siglock); + continue; + } + __group_send_sig_info(SIGHUP, SEND_SIG_PRIV, p); + __group_send_sig_info(SIGCONT, SEND_SIG_PRIV, p); + put_pid(p->signal->tty_old_pgrp); /* A noop */ + spin_lock(&tty->ctrl_lock); + tty_pgrp = get_pid(tty->pgrp); + if (tty->pgrp) + p->signal->tty_old_pgrp = get_pid(tty->pgrp); + spin_unlock(&tty->ctrl_lock); + spin_unlock_irq(&p->sighand->siglock); + } while_each_pid_task(tty->session, PIDTYPE_SID, p); + } + read_unlock(&tasklist_lock); + + if (tty_pgrp) { + if (exit_session) + kill_pgrp(tty_pgrp, SIGHUP, exit_session); + put_pid(tty_pgrp); + } + + return refs; +} + +/** + * disassociate_ctty - disconnect controlling tty + * @on_exit: true if exiting so need to "hang up" the session + * + * This function is typically called only by the session leader, when + * it wants to disassociate itself from its controlling tty. + * + * It performs the following functions: + * (1) Sends a SIGHUP and SIGCONT to the foreground process group + * (2) Clears the tty from being controlling the session + * (3) Clears the controlling tty for all processes in the + * session group. + * + * The argument on_exit is set to 1 if called when a process is + * exiting; it is 0 if called by the ioctl TIOCNOTTY. + * + * Locking: + * BTM is taken for hysterical raisons, and held when + * called from no_tty(). + * tty_mutex is taken to protect tty + * ->siglock is taken to protect ->signal/->sighand + * tasklist_lock is taken to walk process list for sessions + * ->siglock is taken to protect ->signal/->sighand + */ +void disassociate_ctty(int on_exit) +{ + struct tty_struct *tty; + + if (!current->signal->leader) + return; + + tty = get_current_tty(); + if (tty) { + if (on_exit && tty->driver->type != TTY_DRIVER_TYPE_PTY) { + tty_vhangup_session(tty); + } else { + struct pid *tty_pgrp = tty_get_pgrp(tty); + if (tty_pgrp) { + kill_pgrp(tty_pgrp, SIGHUP, on_exit); + if (!on_exit) + kill_pgrp(tty_pgrp, SIGCONT, on_exit); + put_pid(tty_pgrp); + } + } + tty_kref_put(tty); + + } else if (on_exit) { + struct pid *old_pgrp; + spin_lock_irq(¤t->sighand->siglock); + old_pgrp = current->signal->tty_old_pgrp; + current->signal->tty_old_pgrp = NULL; + spin_unlock_irq(¤t->sighand->siglock); + if (old_pgrp) { + kill_pgrp(old_pgrp, SIGHUP, on_exit); + kill_pgrp(old_pgrp, SIGCONT, on_exit); + put_pid(old_pgrp); + } + return; + } + + tty = get_current_tty(); + if (tty) { + unsigned long flags; + + tty_lock(tty); + spin_lock_irqsave(&tty->ctrl_lock, flags); + put_pid(tty->session); + put_pid(tty->pgrp); + tty->session = NULL; + tty->pgrp = NULL; + spin_unlock_irqrestore(&tty->ctrl_lock, flags); + tty_unlock(tty); + tty_kref_put(tty); + } + + /* If tty->ctrl.pgrp is not NULL, it may be assigned to + * current->signal->tty_old_pgrp in a race condition, and + * cause pid memleak. Release current->signal->tty_old_pgrp + * after tty->ctrl.pgrp set to NULL. + */ + spin_lock_irq(¤t->sighand->siglock); + put_pid(current->signal->tty_old_pgrp); + current->signal->tty_old_pgrp = NULL; + spin_unlock_irq(¤t->sighand->siglock); + + /* Now clear signal->tty under the lock */ + read_lock(&tasklist_lock); + session_clear_tty(task_session(current)); + read_unlock(&tasklist_lock); +} + +/* + * + * no_tty - Ensure the current process does not have a controlling tty + */ +void no_tty(void) +{ + /* FIXME: Review locking here. The tty_lock never covered any race + between a new association and proc_clear_tty but possible we need + to protect against this anyway */ + struct task_struct *tsk = current; + disassociate_ctty(0); + proc_clear_tty(tsk); +} + +/** + * tiocsctty - set controlling tty + * @tty: tty structure + * @arg: user argument + * + * This ioctl is used to manage job control. It permits a session + * leader to set this tty as the controlling tty for the session. + * + * Locking: + * Takes tty_lock() to serialize proc_set_tty() for this tty + * Takes tasklist_lock internally to walk sessions + * Takes ->siglock() when updating signal->tty + */ +static int tiocsctty(struct tty_struct *tty, struct file *file, int arg) +{ + int ret = 0; + + tty_lock(tty); + read_lock(&tasklist_lock); + + if (current->signal->leader && (task_session(current) == tty->session)) + goto unlock; + + /* + * The process must be a session leader and + * not have a controlling tty already. + */ + if (!current->signal->leader || current->signal->tty) { + ret = -EPERM; + goto unlock; + } + + if (tty->session) { + /* + * This tty is already the controlling + * tty for another session group! + */ + if (arg == 1 && capable(CAP_SYS_ADMIN)) { + /* + * Steal it away + */ + session_clear_tty(tty->session); + } else { + ret = -EPERM; + goto unlock; + } + } + + /* See the comment in tty_open_proc_set_tty(). */ + if ((file->f_mode & FMODE_READ) == 0 && !capable(CAP_SYS_ADMIN)) { + ret = -EPERM; + goto unlock; + } + + proc_set_tty(tty); +unlock: + read_unlock(&tasklist_lock); + tty_unlock(tty); + return ret; +} + +/** + * tty_get_pgrp - return a ref counted pgrp pid + * @tty: tty to read + * + * Returns a refcounted instance of the pid struct for the process + * group controlling the tty. + */ +struct pid *tty_get_pgrp(struct tty_struct *tty) +{ + unsigned long flags; + struct pid *pgrp; + + spin_lock_irqsave(&tty->ctrl_lock, flags); + pgrp = get_pid(tty->pgrp); + spin_unlock_irqrestore(&tty->ctrl_lock, flags); + + return pgrp; +} +EXPORT_SYMBOL_GPL(tty_get_pgrp); + +/* + * This checks not only the pgrp, but falls back on the pid if no + * satisfactory pgrp is found. I dunno - gdb doesn't work correctly + * without this... + * + * The caller must hold rcu lock or the tasklist lock. + */ +static struct pid *session_of_pgrp(struct pid *pgrp) +{ + struct task_struct *p; + struct pid *sid = NULL; + + p = pid_task(pgrp, PIDTYPE_PGID); + if (p == NULL) + p = pid_task(pgrp, PIDTYPE_PID); + if (p != NULL) + sid = task_session(p); + + return sid; +} + +/** + * tiocgpgrp - get process group + * @tty: tty passed by user + * @real_tty: tty side of the tty passed by the user if a pty else the tty + * @p: returned pid + * + * Obtain the process group of the tty. If there is no process group + * return an error. + * + * Locking: none. Reference to current->signal->tty is safe. + */ +static int tiocgpgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p) +{ + struct pid *pid; + int ret; + /* + * (tty == real_tty) is a cheap way of + * testing if the tty is NOT a master pty. + */ + if (tty == real_tty && current->signal->tty != real_tty) + return -ENOTTY; + pid = tty_get_pgrp(real_tty); + ret = put_user(pid_vnr(pid), p); + put_pid(pid); + return ret; +} + +/** + * tiocspgrp - attempt to set process group + * @tty: tty passed by user + * @real_tty: tty side device matching tty passed by user + * @p: pid pointer + * + * Set the process group of the tty to the session passed. Only + * permitted where the tty session is our session. + * + * Locking: RCU, ctrl lock + */ +static int tiocspgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p) +{ + struct pid *pgrp; + pid_t pgrp_nr; + int retval = tty_check_change(real_tty); + + if (retval == -EIO) + return -ENOTTY; + if (retval) + return retval; + + if (get_user(pgrp_nr, p)) + return -EFAULT; + if (pgrp_nr < 0) + return -EINVAL; + + spin_lock_irq(&real_tty->ctrl_lock); + if (!current->signal->tty || + (current->signal->tty != real_tty) || + (real_tty->session != task_session(current))) { + retval = -ENOTTY; + goto out_unlock_ctrl; + } + rcu_read_lock(); + pgrp = find_vpid(pgrp_nr); + retval = -ESRCH; + if (!pgrp) + goto out_unlock; + retval = -EPERM; + if (session_of_pgrp(pgrp) != task_session(current)) + goto out_unlock; + retval = 0; + put_pid(real_tty->pgrp); + real_tty->pgrp = get_pid(pgrp); +out_unlock: + rcu_read_unlock(); +out_unlock_ctrl: + spin_unlock_irq(&real_tty->ctrl_lock); + return retval; +} + +/** + * tiocgsid - get session id + * @tty: tty passed by user + * @real_tty: tty side of the tty passed by the user if a pty else the tty + * @p: pointer to returned session id + * + * Obtain the session id of the tty. If there is no session + * return an error. + */ +static int tiocgsid(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p) +{ + unsigned long flags; + pid_t sid; + + /* + * (tty == real_tty) is a cheap way of + * testing if the tty is NOT a master pty. + */ + if (tty == real_tty && current->signal->tty != real_tty) + return -ENOTTY; + + spin_lock_irqsave(&real_tty->ctrl_lock, flags); + if (!real_tty->session) + goto err; + sid = pid_vnr(real_tty->session); + spin_unlock_irqrestore(&real_tty->ctrl_lock, flags); + + return put_user(sid, p); + +err: + spin_unlock_irqrestore(&real_tty->ctrl_lock, flags); + return -ENOTTY; +} + +/* + * Called from tty_ioctl(). If tty is a pty then real_tty is the slave side, + * if not then tty == real_tty. + */ +long tty_jobctrl_ioctl(struct tty_struct *tty, struct tty_struct *real_tty, + struct file *file, unsigned int cmd, unsigned long arg) +{ + void __user *p = (void __user *)arg; + + switch (cmd) { + case TIOCNOTTY: + if (current->signal->tty != tty) + return -ENOTTY; + no_tty(); + return 0; + case TIOCSCTTY: + return tiocsctty(real_tty, file, arg); + case TIOCGPGRP: + return tiocgpgrp(tty, real_tty, p); + case TIOCSPGRP: + return tiocspgrp(tty, real_tty, p); + case TIOCGSID: + return tiocgsid(tty, real_tty, p); + } + return -ENOIOCTLCMD; +} diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c new file mode 100644 index 000000000..c23938b86 --- /dev/null +++ b/drivers/tty/tty_ldisc.c @@ -0,0 +1,887 @@ +// SPDX-License-Identifier: GPL-2.0 +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "tty.h" + +#undef LDISC_DEBUG_HANGUP + +#ifdef LDISC_DEBUG_HANGUP +#define tty_ldisc_debug(tty, f, args...) tty_debug(tty, f, ##args) +#else +#define tty_ldisc_debug(tty, f, args...) +#endif + +/* lockdep nested classes for tty->ldisc_sem */ +enum { + LDISC_SEM_NORMAL, + LDISC_SEM_OTHER, +}; + + +/* + * This guards the refcounted line discipline lists. The lock + * must be taken with irqs off because there are hangup path + * callers who will do ldisc lookups and cannot sleep. + */ + +static DEFINE_RAW_SPINLOCK(tty_ldiscs_lock); +/* Line disc dispatch table */ +static struct tty_ldisc_ops *tty_ldiscs[NR_LDISCS]; + +/** + * tty_register_ldisc - install a line discipline + * @disc: ldisc number + * @new_ldisc: pointer to the ldisc object + * + * Installs a new line discipline into the kernel. The discipline + * is set up as unreferenced and then made available to the kernel + * from this point onwards. + * + * Locking: + * takes tty_ldiscs_lock to guard against ldisc races + */ + +int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc) +{ + unsigned long flags; + int ret = 0; + + if (disc < N_TTY || disc >= NR_LDISCS) + return -EINVAL; + + raw_spin_lock_irqsave(&tty_ldiscs_lock, flags); + tty_ldiscs[disc] = new_ldisc; + new_ldisc->num = disc; + new_ldisc->refcount = 0; + raw_spin_unlock_irqrestore(&tty_ldiscs_lock, flags); + + return ret; +} +EXPORT_SYMBOL(tty_register_ldisc); + +/** + * tty_unregister_ldisc - unload a line discipline + * @disc: ldisc number + * + * Remove a line discipline from the kernel providing it is not + * currently in use. + * + * Locking: + * takes tty_ldiscs_lock to guard against ldisc races + */ + +int tty_unregister_ldisc(int disc) +{ + unsigned long flags; + int ret = 0; + + if (disc < N_TTY || disc >= NR_LDISCS) + return -EINVAL; + + raw_spin_lock_irqsave(&tty_ldiscs_lock, flags); + if (tty_ldiscs[disc]->refcount) + ret = -EBUSY; + else + tty_ldiscs[disc] = NULL; + raw_spin_unlock_irqrestore(&tty_ldiscs_lock, flags); + + return ret; +} +EXPORT_SYMBOL(tty_unregister_ldisc); + +static struct tty_ldisc_ops *get_ldops(int disc) +{ + unsigned long flags; + struct tty_ldisc_ops *ldops, *ret; + + raw_spin_lock_irqsave(&tty_ldiscs_lock, flags); + ret = ERR_PTR(-EINVAL); + ldops = tty_ldiscs[disc]; + if (ldops) { + ret = ERR_PTR(-EAGAIN); + if (try_module_get(ldops->owner)) { + ldops->refcount++; + ret = ldops; + } + } + raw_spin_unlock_irqrestore(&tty_ldiscs_lock, flags); + return ret; +} + +static void put_ldops(struct tty_ldisc_ops *ldops) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&tty_ldiscs_lock, flags); + ldops->refcount--; + module_put(ldops->owner); + raw_spin_unlock_irqrestore(&tty_ldiscs_lock, flags); +} + +/** + * tty_ldisc_get - take a reference to an ldisc + * @disc: ldisc number + * + * Takes a reference to a line discipline. Deals with refcounts and + * module locking counts. + * + * Returns: -EINVAL if the discipline index is not [N_TTY..NR_LDISCS] or + * if the discipline is not registered + * -EAGAIN if request_module() failed to load or register the + * the discipline + * -ENOMEM if allocation failure + * + * Otherwise, returns a pointer to the discipline and bumps the + * ref count + * + * Locking: + * takes tty_ldiscs_lock to guard against ldisc races + */ + +static int tty_ldisc_autoload = IS_BUILTIN(CONFIG_LDISC_AUTOLOAD); + +static struct tty_ldisc *tty_ldisc_get(struct tty_struct *tty, int disc) +{ + struct tty_ldisc *ld; + struct tty_ldisc_ops *ldops; + + if (disc < N_TTY || disc >= NR_LDISCS) + return ERR_PTR(-EINVAL); + + /* + * Get the ldisc ops - we may need to request them to be loaded + * dynamically and try again. + */ + ldops = get_ldops(disc); + if (IS_ERR(ldops)) { + if (!capable(CAP_SYS_MODULE) && !tty_ldisc_autoload) + return ERR_PTR(-EPERM); + request_module("tty-ldisc-%d", disc); + ldops = get_ldops(disc); + if (IS_ERR(ldops)) + return ERR_CAST(ldops); + } + + /* + * There is no way to handle allocation failure of only 16 bytes. + * Let's simplify error handling and save more memory. + */ + ld = kmalloc(sizeof(struct tty_ldisc), GFP_KERNEL | __GFP_NOFAIL); + ld->ops = ldops; + ld->tty = tty; + + return ld; +} + +/** + * tty_ldisc_put - release the ldisc + * + * Complement of tty_ldisc_get(). + */ +static void tty_ldisc_put(struct tty_ldisc *ld) +{ + if (WARN_ON_ONCE(!ld)) + return; + + put_ldops(ld->ops); + kfree(ld); +} + +static void *tty_ldiscs_seq_start(struct seq_file *m, loff_t *pos) +{ + return (*pos < NR_LDISCS) ? pos : NULL; +} + +static void *tty_ldiscs_seq_next(struct seq_file *m, void *v, loff_t *pos) +{ + (*pos)++; + return (*pos < NR_LDISCS) ? pos : NULL; +} + +static void tty_ldiscs_seq_stop(struct seq_file *m, void *v) +{ +} + +static int tty_ldiscs_seq_show(struct seq_file *m, void *v) +{ + int i = *(loff_t *)v; + struct tty_ldisc_ops *ldops; + + ldops = get_ldops(i); + if (IS_ERR(ldops)) + return 0; + seq_printf(m, "%-10s %2d\n", ldops->name ? ldops->name : "???", i); + put_ldops(ldops); + return 0; +} + +const struct seq_operations tty_ldiscs_seq_ops = { + .start = tty_ldiscs_seq_start, + .next = tty_ldiscs_seq_next, + .stop = tty_ldiscs_seq_stop, + .show = tty_ldiscs_seq_show, +}; + +/** + * tty_ldisc_ref_wait - wait for the tty ldisc + * @tty: tty device + * + * Dereference the line discipline for the terminal and take a + * reference to it. If the line discipline is in flux then + * wait patiently until it changes. + * + * Returns: NULL if the tty has been hungup and not re-opened with + * a new file descriptor, otherwise valid ldisc reference + * + * Note: Must not be called from an IRQ/timer context. The caller + * must also be careful not to hold other locks that will deadlock + * against a discipline change, such as an existing ldisc reference + * (which we check for) + * + * Note: a file_operations routine (read/poll/write) should use this + * function to wait for any ldisc lifetime events to finish. + */ + +struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *tty) +{ + struct tty_ldisc *ld; + + ldsem_down_read(&tty->ldisc_sem, MAX_SCHEDULE_TIMEOUT); + ld = tty->ldisc; + if (!ld) + ldsem_up_read(&tty->ldisc_sem); + return ld; +} +EXPORT_SYMBOL_GPL(tty_ldisc_ref_wait); + +/** + * tty_ldisc_ref - get the tty ldisc + * @tty: tty device + * + * Dereference the line discipline for the terminal and take a + * reference to it. If the line discipline is in flux then + * return NULL. Can be called from IRQ and timer functions. + */ + +struct tty_ldisc *tty_ldisc_ref(struct tty_struct *tty) +{ + struct tty_ldisc *ld = NULL; + + if (ldsem_down_read_trylock(&tty->ldisc_sem)) { + ld = tty->ldisc; + if (!ld) + ldsem_up_read(&tty->ldisc_sem); + } + return ld; +} +EXPORT_SYMBOL_GPL(tty_ldisc_ref); + +/** + * tty_ldisc_deref - free a tty ldisc reference + * @ld: reference to free up + * + * Undoes the effect of tty_ldisc_ref or tty_ldisc_ref_wait. May + * be called in IRQ context. + */ + +void tty_ldisc_deref(struct tty_ldisc *ld) +{ + ldsem_up_read(&ld->tty->ldisc_sem); +} +EXPORT_SYMBOL_GPL(tty_ldisc_deref); + + +static inline int +__tty_ldisc_lock(struct tty_struct *tty, unsigned long timeout) +{ + return ldsem_down_write(&tty->ldisc_sem, timeout); +} + +static inline int +__tty_ldisc_lock_nested(struct tty_struct *tty, unsigned long timeout) +{ + return ldsem_down_write_nested(&tty->ldisc_sem, + LDISC_SEM_OTHER, timeout); +} + +static inline void __tty_ldisc_unlock(struct tty_struct *tty) +{ + ldsem_up_write(&tty->ldisc_sem); +} + +int tty_ldisc_lock(struct tty_struct *tty, unsigned long timeout) +{ + int ret; + + /* Kindly asking blocked readers to release the read side */ + set_bit(TTY_LDISC_CHANGING, &tty->flags); + wake_up_interruptible_all(&tty->read_wait); + wake_up_interruptible_all(&tty->write_wait); + + ret = __tty_ldisc_lock(tty, timeout); + if (!ret) + return -EBUSY; + set_bit(TTY_LDISC_HALTED, &tty->flags); + return 0; +} + +void tty_ldisc_unlock(struct tty_struct *tty) +{ + clear_bit(TTY_LDISC_HALTED, &tty->flags); + /* Can be cleared here - ldisc_unlock will wake up writers firstly */ + clear_bit(TTY_LDISC_CHANGING, &tty->flags); + __tty_ldisc_unlock(tty); +} + +static int +tty_ldisc_lock_pair_timeout(struct tty_struct *tty, struct tty_struct *tty2, + unsigned long timeout) +{ + int ret; + + if (tty < tty2) { + ret = __tty_ldisc_lock(tty, timeout); + if (ret) { + ret = __tty_ldisc_lock_nested(tty2, timeout); + if (!ret) + __tty_ldisc_unlock(tty); + } + } else { + /* if this is possible, it has lots of implications */ + WARN_ON_ONCE(tty == tty2); + if (tty2 && tty != tty2) { + ret = __tty_ldisc_lock(tty2, timeout); + if (ret) { + ret = __tty_ldisc_lock_nested(tty, timeout); + if (!ret) + __tty_ldisc_unlock(tty2); + } + } else + ret = __tty_ldisc_lock(tty, timeout); + } + + if (!ret) + return -EBUSY; + + set_bit(TTY_LDISC_HALTED, &tty->flags); + if (tty2) + set_bit(TTY_LDISC_HALTED, &tty2->flags); + return 0; +} + +static void tty_ldisc_lock_pair(struct tty_struct *tty, struct tty_struct *tty2) +{ + tty_ldisc_lock_pair_timeout(tty, tty2, MAX_SCHEDULE_TIMEOUT); +} + +static void tty_ldisc_unlock_pair(struct tty_struct *tty, + struct tty_struct *tty2) +{ + __tty_ldisc_unlock(tty); + if (tty2) + __tty_ldisc_unlock(tty2); +} + +/** + * tty_ldisc_flush - flush line discipline queue + * @tty: tty + * + * Flush the line discipline queue (if any) and the tty flip buffers + * for this tty. + */ + +void tty_ldisc_flush(struct tty_struct *tty) +{ + struct tty_ldisc *ld = tty_ldisc_ref(tty); + + tty_buffer_flush(tty, ld); + if (ld) + tty_ldisc_deref(ld); +} +EXPORT_SYMBOL_GPL(tty_ldisc_flush); + +/** + * tty_set_termios_ldisc - set ldisc field + * @tty: tty structure + * @disc: line discipline number + * + * This is probably overkill for real world processors but + * they are not on hot paths so a little discipline won't do + * any harm. + * + * The line discipline-related tty_struct fields are reset to + * prevent the ldisc driver from re-using stale information for + * the new ldisc instance. + * + * Locking: takes termios_rwsem + */ + +static void tty_set_termios_ldisc(struct tty_struct *tty, int disc) +{ + down_write(&tty->termios_rwsem); + tty->termios.c_line = disc; + up_write(&tty->termios_rwsem); + + tty->disc_data = NULL; + tty->receive_room = 0; +} + +/** + * tty_ldisc_open - open a line discipline + * @tty: tty we are opening the ldisc on + * @ld: discipline to open + * + * A helper opening method. Also a convenient debugging and check + * point. + * + * Locking: always called with BTM already held. + */ + +static int tty_ldisc_open(struct tty_struct *tty, struct tty_ldisc *ld) +{ + WARN_ON(test_and_set_bit(TTY_LDISC_OPEN, &tty->flags)); + if (ld->ops->open) { + int ret; + /* BTM here locks versus a hangup event */ + ret = ld->ops->open(tty); + if (ret) + clear_bit(TTY_LDISC_OPEN, &tty->flags); + + tty_ldisc_debug(tty, "%p: opened\n", ld); + return ret; + } + return 0; +} + +/** + * tty_ldisc_close - close a line discipline + * @tty: tty we are opening the ldisc on + * @ld: discipline to close + * + * A helper close method. Also a convenient debugging and check + * point. + */ + +static void tty_ldisc_close(struct tty_struct *tty, struct tty_ldisc *ld) +{ + lockdep_assert_held_write(&tty->ldisc_sem); + WARN_ON(!test_bit(TTY_LDISC_OPEN, &tty->flags)); + clear_bit(TTY_LDISC_OPEN, &tty->flags); + if (ld->ops->close) + ld->ops->close(tty); + tty_ldisc_debug(tty, "%p: closed\n", ld); +} + +/** + * tty_ldisc_failto - helper for ldisc failback + * @tty: tty to open the ldisc on + * @ld: ldisc we are trying to fail back to + * + * Helper to try and recover a tty when switching back to the old + * ldisc fails and we need something attached. + */ + +static int tty_ldisc_failto(struct tty_struct *tty, int ld) +{ + struct tty_ldisc *disc = tty_ldisc_get(tty, ld); + int r; + + lockdep_assert_held_write(&tty->ldisc_sem); + if (IS_ERR(disc)) + return PTR_ERR(disc); + tty->ldisc = disc; + tty_set_termios_ldisc(tty, ld); + if ((r = tty_ldisc_open(tty, disc)) < 0) + tty_ldisc_put(disc); + return r; +} + +/** + * tty_ldisc_restore - helper for tty ldisc change + * @tty: tty to recover + * @old: previous ldisc + * + * Restore the previous line discipline or N_TTY when a line discipline + * change fails due to an open error + */ + +static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old) +{ + /* There is an outstanding reference here so this is safe */ + if (tty_ldisc_failto(tty, old->ops->num) < 0) { + const char *name = tty_name(tty); + + pr_warn("Falling back ldisc for %s.\n", name); + /* The traditional behaviour is to fall back to N_TTY, we + want to avoid falling back to N_NULL unless we have no + choice to avoid the risk of breaking anything */ + if (tty_ldisc_failto(tty, N_TTY) < 0 && + tty_ldisc_failto(tty, N_NULL) < 0) + panic("Couldn't open N_NULL ldisc for %s.", name); + } +} + +/** + * tty_set_ldisc - set line discipline + * @tty: the terminal to set + * @disc: the line discipline number + * + * Set the discipline of a tty line. Must be called from a process + * context. The ldisc change logic has to protect itself against any + * overlapping ldisc change (including on the other end of pty pairs), + * the close of one side of a tty/pty pair, and eventually hangup. + */ + +int tty_set_ldisc(struct tty_struct *tty, int disc) +{ + int retval; + struct tty_ldisc *old_ldisc, *new_ldisc; + + new_ldisc = tty_ldisc_get(tty, disc); + if (IS_ERR(new_ldisc)) + return PTR_ERR(new_ldisc); + + tty_lock(tty); + retval = tty_ldisc_lock(tty, 5 * HZ); + if (retval) + goto err; + + if (!tty->ldisc) { + retval = -EIO; + goto out; + } + + /* Check the no-op case */ + if (tty->ldisc->ops->num == disc) + goto out; + + if (test_bit(TTY_HUPPED, &tty->flags)) { + /* We were raced by hangup */ + retval = -EIO; + goto out; + } + + old_ldisc = tty->ldisc; + + /* Shutdown the old discipline. */ + tty_ldisc_close(tty, old_ldisc); + + /* Now set up the new line discipline. */ + tty->ldisc = new_ldisc; + tty_set_termios_ldisc(tty, disc); + + retval = tty_ldisc_open(tty, new_ldisc); + if (retval < 0) { + /* Back to the old one or N_TTY if we can't */ + tty_ldisc_put(new_ldisc); + tty_ldisc_restore(tty, old_ldisc); + } + + if (tty->ldisc->ops->num != old_ldisc->ops->num && tty->ops->set_ldisc) { + down_read(&tty->termios_rwsem); + tty->ops->set_ldisc(tty); + up_read(&tty->termios_rwsem); + } + + /* At this point we hold a reference to the new ldisc and a + reference to the old ldisc, or we hold two references to + the old ldisc (if it was restored as part of error cleanup + above). In either case, releasing a single reference from + the old ldisc is correct. */ + new_ldisc = old_ldisc; +out: + tty_ldisc_unlock(tty); + + /* Restart the work queue in case no characters kick it off. Safe if + already running */ + tty_buffer_restart_work(tty->port); +err: + tty_ldisc_put(new_ldisc); /* drop the extra reference */ + tty_unlock(tty); + return retval; +} +EXPORT_SYMBOL_GPL(tty_set_ldisc); + +/** + * tty_ldisc_kill - teardown ldisc + * @tty: tty being released + * + * Perform final close of the ldisc and reset tty->ldisc + */ +static void tty_ldisc_kill(struct tty_struct *tty) +{ + lockdep_assert_held_write(&tty->ldisc_sem); + if (!tty->ldisc) + return; + /* + * Now kill off the ldisc + */ + tty_ldisc_close(tty, tty->ldisc); + tty_ldisc_put(tty->ldisc); + /* Force an oops if we mess this up */ + tty->ldisc = NULL; +} + +/** + * tty_reset_termios - reset terminal state + * @tty: tty to reset + * + * Restore a terminal to the driver default state. + */ + +static void tty_reset_termios(struct tty_struct *tty) +{ + down_write(&tty->termios_rwsem); + tty->termios = tty->driver->init_termios; + tty->termios.c_ispeed = tty_termios_input_baud_rate(&tty->termios); + tty->termios.c_ospeed = tty_termios_baud_rate(&tty->termios); + up_write(&tty->termios_rwsem); +} + + +/** + * tty_ldisc_reinit - reinitialise the tty ldisc + * @tty: tty to reinit + * @disc: line discipline to reinitialize + * + * Completely reinitialize the line discipline state, by closing the + * current instance, if there is one, and opening a new instance. If + * an error occurs opening the new non-N_TTY instance, the instance + * is dropped and tty->ldisc reset to NULL. The caller can then retry + * with N_TTY instead. + * + * Returns 0 if successful, otherwise error code < 0 + */ + +int tty_ldisc_reinit(struct tty_struct *tty, int disc) +{ + struct tty_ldisc *ld; + int retval; + + lockdep_assert_held_write(&tty->ldisc_sem); + ld = tty_ldisc_get(tty, disc); + if (IS_ERR(ld)) { + BUG_ON(disc == N_TTY); + return PTR_ERR(ld); + } + + if (tty->ldisc) { + tty_ldisc_close(tty, tty->ldisc); + tty_ldisc_put(tty->ldisc); + } + + /* switch the line discipline */ + tty->ldisc = ld; + tty_set_termios_ldisc(tty, disc); + retval = tty_ldisc_open(tty, tty->ldisc); + if (retval) { + tty_ldisc_put(tty->ldisc); + tty->ldisc = NULL; + } + return retval; +} + +/** + * tty_ldisc_hangup - hangup ldisc reset + * @tty: tty being hung up + * + * Some tty devices reset their termios when they receive a hangup + * event. In that situation we must also switch back to N_TTY properly + * before we reset the termios data. + * + * Locking: We can take the ldisc mutex as the rest of the code is + * careful to allow for this. + * + * In the pty pair case this occurs in the close() path of the + * tty itself so we must be careful about locking rules. + */ + +void tty_ldisc_hangup(struct tty_struct *tty, bool reinit) +{ + struct tty_ldisc *ld; + + tty_ldisc_debug(tty, "%p: hangup\n", tty->ldisc); + + ld = tty_ldisc_ref(tty); + if (ld != NULL) { + if (ld->ops->flush_buffer) + ld->ops->flush_buffer(tty); + tty_driver_flush_buffer(tty); + if ((test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags)) && + ld->ops->write_wakeup) + ld->ops->write_wakeup(tty); + if (ld->ops->hangup) + ld->ops->hangup(tty); + tty_ldisc_deref(ld); + } + + wake_up_interruptible_poll(&tty->write_wait, EPOLLOUT); + wake_up_interruptible_poll(&tty->read_wait, EPOLLIN); + + /* + * Shutdown the current line discipline, and reset it to + * N_TTY if need be. + * + * Avoid racing set_ldisc or tty_ldisc_release + */ + tty_ldisc_lock(tty, MAX_SCHEDULE_TIMEOUT); + + if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) + tty_reset_termios(tty); + + if (tty->ldisc) { + if (reinit) { + if (tty_ldisc_reinit(tty, tty->termios.c_line) < 0 && + tty_ldisc_reinit(tty, N_TTY) < 0) + WARN_ON(tty_ldisc_reinit(tty, N_NULL) < 0); + } else + tty_ldisc_kill(tty); + } + tty_ldisc_unlock(tty); +} + +/** + * tty_ldisc_setup - open line discipline + * @tty: tty being shut down + * @o_tty: pair tty for pty/tty pairs + * + * Called during the initial open of a tty/pty pair in order to set up the + * line disciplines and bind them to the tty. This has no locking issues + * as the device isn't yet active. + */ + +int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty) +{ + int retval = tty_ldisc_open(tty, tty->ldisc); + if (retval) + return retval; + + if (o_tty) { + /* + * Called without o_tty->ldisc_sem held, as o_tty has been + * just allocated and no one has a reference to it. + */ + retval = tty_ldisc_open(o_tty, o_tty->ldisc); + if (retval) { + tty_ldisc_close(tty, tty->ldisc); + return retval; + } + } + return 0; +} + +/** + * tty_ldisc_release - release line discipline + * @tty: tty being shut down (or one end of pty pair) + * + * Called during the final close of a tty or a pty pair in order to shut + * down the line discpline layer. On exit, each tty's ldisc is NULL. + */ + +void tty_ldisc_release(struct tty_struct *tty) +{ + struct tty_struct *o_tty = tty->link; + + /* + * Shutdown this line discipline. As this is the final close, + * it does not race with the set_ldisc code path. + */ + + tty_ldisc_lock_pair(tty, o_tty); + tty_ldisc_kill(tty); + if (o_tty) + tty_ldisc_kill(o_tty); + tty_ldisc_unlock_pair(tty, o_tty); + + /* And the memory resources remaining (buffers, termios) will be + disposed of when the kref hits zero */ + + tty_ldisc_debug(tty, "released\n"); +} +EXPORT_SYMBOL_GPL(tty_ldisc_release); + +/** + * tty_ldisc_init - ldisc setup for new tty + * @tty: tty being allocated + * + * Set up the line discipline objects for a newly allocated tty. Note that + * the tty structure is not completely set up when this call is made. + */ + +int tty_ldisc_init(struct tty_struct *tty) +{ + struct tty_ldisc *ld = tty_ldisc_get(tty, N_TTY); + if (IS_ERR(ld)) + return PTR_ERR(ld); + tty->ldisc = ld; + return 0; +} + +/** + * tty_ldisc_deinit - ldisc cleanup for new tty + * @tty: tty that was allocated recently + * + * The tty structure must not becompletely set up (tty_ldisc_setup) when + * this call is made. + */ +void tty_ldisc_deinit(struct tty_struct *tty) +{ + /* no ldisc_sem, tty is being destroyed */ + if (tty->ldisc) + tty_ldisc_put(tty->ldisc); + tty->ldisc = NULL; +} + +static struct ctl_table tty_table[] = { + { + .procname = "ldisc_autoload", + .data = &tty_ldisc_autoload, + .maxlen = sizeof(tty_ldisc_autoload), + .mode = 0644, + .proc_handler = proc_dointvec, + .extra1 = SYSCTL_ZERO, + .extra2 = SYSCTL_ONE, + }, + { } +}; + +static struct ctl_table tty_dir_table[] = { + { + .procname = "tty", + .mode = 0555, + .child = tty_table, + }, + { } +}; + +static struct ctl_table tty_root_table[] = { + { + .procname = "dev", + .mode = 0555, + .child = tty_dir_table, + }, + { } +}; + +void tty_sysctl_init(void) +{ + register_sysctl_table(tty_root_table); +} diff --git a/drivers/tty/tty_ldsem.c b/drivers/tty/tty_ldsem.c new file mode 100644 index 000000000..ce8291053 --- /dev/null +++ b/drivers/tty/tty_ldsem.c @@ -0,0 +1,430 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Ldisc rw semaphore + * + * The ldisc semaphore is semantically a rw_semaphore but which enforces + * an alternate policy, namely: + * 1) Supports lock wait timeouts + * 2) Write waiter has priority + * 3) Downgrading is not supported + * + * Implementation notes: + * 1) Upper half of semaphore count is a wait count (differs from rwsem + * in that rwsem normalizes the upper half to the wait bias) + * 2) Lacks overflow checking + * + * The generic counting was copied and modified from include/asm-generic/rwsem.h + * by Paul Mackerras . + * + * The scheduling policy was copied and modified from lib/rwsem.c + * Written by David Howells (dhowells@redhat.com). + * + * This implementation incorporates the write lock stealing work of + * Michel Lespinasse . + * + * Copyright (C) 2013 Peter Hurley + */ + +#include +#include +#include +#include +#include +#include +#include + + +#if BITS_PER_LONG == 64 +# define LDSEM_ACTIVE_MASK 0xffffffffL +#else +# define LDSEM_ACTIVE_MASK 0x0000ffffL +#endif + +#define LDSEM_UNLOCKED 0L +#define LDSEM_ACTIVE_BIAS 1L +#define LDSEM_WAIT_BIAS (-LDSEM_ACTIVE_MASK-1) +#define LDSEM_READ_BIAS LDSEM_ACTIVE_BIAS +#define LDSEM_WRITE_BIAS (LDSEM_WAIT_BIAS + LDSEM_ACTIVE_BIAS) + +struct ldsem_waiter { + struct list_head list; + struct task_struct *task; +}; + +/* + * Initialize an ldsem: + */ +void __init_ldsem(struct ld_semaphore *sem, const char *name, + struct lock_class_key *key) +{ +#ifdef CONFIG_DEBUG_LOCK_ALLOC + /* + * Make sure we are not reinitializing a held semaphore: + */ + debug_check_no_locks_freed((void *)sem, sizeof(*sem)); + lockdep_init_map(&sem->dep_map, name, key, 0); +#endif + atomic_long_set(&sem->count, LDSEM_UNLOCKED); + sem->wait_readers = 0; + raw_spin_lock_init(&sem->wait_lock); + INIT_LIST_HEAD(&sem->read_wait); + INIT_LIST_HEAD(&sem->write_wait); +} + +static void __ldsem_wake_readers(struct ld_semaphore *sem) +{ + struct ldsem_waiter *waiter, *next; + struct task_struct *tsk; + long adjust, count; + + /* + * Try to grant read locks to all readers on the read wait list. + * Note the 'active part' of the count is incremented by + * the number of readers before waking any processes up. + */ + adjust = sem->wait_readers * (LDSEM_ACTIVE_BIAS - LDSEM_WAIT_BIAS); + count = atomic_long_add_return(adjust, &sem->count); + do { + if (count > 0) + break; + if (atomic_long_try_cmpxchg(&sem->count, &count, count - adjust)) + return; + } while (1); + + list_for_each_entry_safe(waiter, next, &sem->read_wait, list) { + tsk = waiter->task; + smp_store_release(&waiter->task, NULL); + wake_up_process(tsk); + put_task_struct(tsk); + } + INIT_LIST_HEAD(&sem->read_wait); + sem->wait_readers = 0; +} + +static inline int writer_trylock(struct ld_semaphore *sem) +{ + /* + * Only wake this writer if the active part of the count can be + * transitioned from 0 -> 1 + */ + long count = atomic_long_add_return(LDSEM_ACTIVE_BIAS, &sem->count); + do { + if ((count & LDSEM_ACTIVE_MASK) == LDSEM_ACTIVE_BIAS) + return 1; + if (atomic_long_try_cmpxchg(&sem->count, &count, count - LDSEM_ACTIVE_BIAS)) + return 0; + } while (1); +} + +static void __ldsem_wake_writer(struct ld_semaphore *sem) +{ + struct ldsem_waiter *waiter; + + waiter = list_entry(sem->write_wait.next, struct ldsem_waiter, list); + wake_up_process(waiter->task); +} + +/* + * handle the lock release when processes blocked on it that can now run + * - if we come here from up_xxxx(), then: + * - the 'active part' of count (&0x0000ffff) reached 0 (but may have changed) + * - the 'waiting part' of count (&0xffff0000) is -ve (and will still be so) + * - the spinlock must be held by the caller + * - woken process blocks are discarded from the list after having task zeroed + */ +static void __ldsem_wake(struct ld_semaphore *sem) +{ + if (!list_empty(&sem->write_wait)) + __ldsem_wake_writer(sem); + else if (!list_empty(&sem->read_wait)) + __ldsem_wake_readers(sem); +} + +static void ldsem_wake(struct ld_semaphore *sem) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&sem->wait_lock, flags); + __ldsem_wake(sem); + raw_spin_unlock_irqrestore(&sem->wait_lock, flags); +} + +/* + * wait for the read lock to be granted + */ +static struct ld_semaphore __sched * +down_read_failed(struct ld_semaphore *sem, long count, long timeout) +{ + struct ldsem_waiter waiter; + long adjust = -LDSEM_ACTIVE_BIAS + LDSEM_WAIT_BIAS; + + /* set up my own style of waitqueue */ + raw_spin_lock_irq(&sem->wait_lock); + + /* + * Try to reverse the lock attempt but if the count has changed + * so that reversing fails, check if there are are no waiters, + * and early-out if not + */ + do { + if (atomic_long_try_cmpxchg(&sem->count, &count, count + adjust)) { + count += adjust; + break; + } + if (count > 0) { + raw_spin_unlock_irq(&sem->wait_lock); + return sem; + } + } while (1); + + list_add_tail(&waiter.list, &sem->read_wait); + sem->wait_readers++; + + waiter.task = current; + get_task_struct(current); + + /* if there are no active locks, wake the new lock owner(s) */ + if ((count & LDSEM_ACTIVE_MASK) == 0) + __ldsem_wake(sem); + + raw_spin_unlock_irq(&sem->wait_lock); + + /* wait to be given the lock */ + for (;;) { + set_current_state(TASK_UNINTERRUPTIBLE); + + if (!smp_load_acquire(&waiter.task)) + break; + if (!timeout) + break; + timeout = schedule_timeout(timeout); + } + + __set_current_state(TASK_RUNNING); + + if (!timeout) { + /* + * Lock timed out but check if this task was just + * granted lock ownership - if so, pretend there + * was no timeout; otherwise, cleanup lock wait. + */ + raw_spin_lock_irq(&sem->wait_lock); + if (waiter.task) { + atomic_long_add_return(-LDSEM_WAIT_BIAS, &sem->count); + sem->wait_readers--; + list_del(&waiter.list); + raw_spin_unlock_irq(&sem->wait_lock); + put_task_struct(waiter.task); + return NULL; + } + raw_spin_unlock_irq(&sem->wait_lock); + } + + return sem; +} + +/* + * wait for the write lock to be granted + */ +static struct ld_semaphore __sched * +down_write_failed(struct ld_semaphore *sem, long count, long timeout) +{ + struct ldsem_waiter waiter; + long adjust = -LDSEM_ACTIVE_BIAS; + int locked = 0; + + /* set up my own style of waitqueue */ + raw_spin_lock_irq(&sem->wait_lock); + + /* + * Try to reverse the lock attempt but if the count has changed + * so that reversing fails, check if the lock is now owned, + * and early-out if so. + */ + do { + if (atomic_long_try_cmpxchg(&sem->count, &count, count + adjust)) + break; + if ((count & LDSEM_ACTIVE_MASK) == LDSEM_ACTIVE_BIAS) { + raw_spin_unlock_irq(&sem->wait_lock); + return sem; + } + } while (1); + + list_add_tail(&waiter.list, &sem->write_wait); + + waiter.task = current; + + set_current_state(TASK_UNINTERRUPTIBLE); + for (;;) { + if (!timeout) + break; + raw_spin_unlock_irq(&sem->wait_lock); + timeout = schedule_timeout(timeout); + raw_spin_lock_irq(&sem->wait_lock); + set_current_state(TASK_UNINTERRUPTIBLE); + locked = writer_trylock(sem); + if (locked) + break; + } + + if (!locked) + atomic_long_add_return(-LDSEM_WAIT_BIAS, &sem->count); + list_del(&waiter.list); + + /* + * In case of timeout, wake up every reader who gave the right of way + * to writer. Prevent separation readers into two groups: + * one that helds semaphore and another that sleeps. + * (in case of no contention with a writer) + */ + if (!locked && list_empty(&sem->write_wait)) + __ldsem_wake_readers(sem); + + raw_spin_unlock_irq(&sem->wait_lock); + + __set_current_state(TASK_RUNNING); + + /* lock wait may have timed out */ + if (!locked) + return NULL; + return sem; +} + + + +static int __ldsem_down_read_nested(struct ld_semaphore *sem, + int subclass, long timeout) +{ + long count; + + rwsem_acquire_read(&sem->dep_map, subclass, 0, _RET_IP_); + + count = atomic_long_add_return(LDSEM_READ_BIAS, &sem->count); + if (count <= 0) { + lock_contended(&sem->dep_map, _RET_IP_); + if (!down_read_failed(sem, count, timeout)) { + rwsem_release(&sem->dep_map, _RET_IP_); + return 0; + } + } + lock_acquired(&sem->dep_map, _RET_IP_); + return 1; +} + +static int __ldsem_down_write_nested(struct ld_semaphore *sem, + int subclass, long timeout) +{ + long count; + + rwsem_acquire(&sem->dep_map, subclass, 0, _RET_IP_); + + count = atomic_long_add_return(LDSEM_WRITE_BIAS, &sem->count); + if ((count & LDSEM_ACTIVE_MASK) != LDSEM_ACTIVE_BIAS) { + lock_contended(&sem->dep_map, _RET_IP_); + if (!down_write_failed(sem, count, timeout)) { + rwsem_release(&sem->dep_map, _RET_IP_); + return 0; + } + } + lock_acquired(&sem->dep_map, _RET_IP_); + return 1; +} + + +/* + * lock for reading -- returns 1 if successful, 0 if timed out + */ +int __sched ldsem_down_read(struct ld_semaphore *sem, long timeout) +{ + might_sleep(); + return __ldsem_down_read_nested(sem, 0, timeout); +} + +/* + * trylock for reading -- returns 1 if successful, 0 if contention + */ +int ldsem_down_read_trylock(struct ld_semaphore *sem) +{ + long count = atomic_long_read(&sem->count); + + while (count >= 0) { + if (atomic_long_try_cmpxchg(&sem->count, &count, count + LDSEM_READ_BIAS)) { + rwsem_acquire_read(&sem->dep_map, 0, 1, _RET_IP_); + lock_acquired(&sem->dep_map, _RET_IP_); + return 1; + } + } + return 0; +} + +/* + * lock for writing -- returns 1 if successful, 0 if timed out + */ +int __sched ldsem_down_write(struct ld_semaphore *sem, long timeout) +{ + might_sleep(); + return __ldsem_down_write_nested(sem, 0, timeout); +} + +/* + * trylock for writing -- returns 1 if successful, 0 if contention + */ +int ldsem_down_write_trylock(struct ld_semaphore *sem) +{ + long count = atomic_long_read(&sem->count); + + while ((count & LDSEM_ACTIVE_MASK) == 0) { + if (atomic_long_try_cmpxchg(&sem->count, &count, count + LDSEM_WRITE_BIAS)) { + rwsem_acquire(&sem->dep_map, 0, 1, _RET_IP_); + lock_acquired(&sem->dep_map, _RET_IP_); + return 1; + } + } + return 0; +} + +/* + * release a read lock + */ +void ldsem_up_read(struct ld_semaphore *sem) +{ + long count; + + rwsem_release(&sem->dep_map, _RET_IP_); + + count = atomic_long_add_return(-LDSEM_READ_BIAS, &sem->count); + if (count < 0 && (count & LDSEM_ACTIVE_MASK) == 0) + ldsem_wake(sem); +} + +/* + * release a write lock + */ +void ldsem_up_write(struct ld_semaphore *sem) +{ + long count; + + rwsem_release(&sem->dep_map, _RET_IP_); + + count = atomic_long_add_return(-LDSEM_WRITE_BIAS, &sem->count); + if (count < 0) + ldsem_wake(sem); +} + + +#ifdef CONFIG_DEBUG_LOCK_ALLOC + +int ldsem_down_read_nested(struct ld_semaphore *sem, int subclass, long timeout) +{ + might_sleep(); + return __ldsem_down_read_nested(sem, subclass, timeout); +} + +int ldsem_down_write_nested(struct ld_semaphore *sem, int subclass, + long timeout) +{ + might_sleep(); + return __ldsem_down_write_nested(sem, subclass, timeout); +} + +#endif diff --git a/drivers/tty/tty_mutex.c b/drivers/tty/tty_mutex.c new file mode 100644 index 000000000..393518a24 --- /dev/null +++ b/drivers/tty/tty_mutex.c @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: GPL-2.0 +#include +#include +#include +#include +#include +#include "tty.h" + +/* Legacy tty mutex glue */ + +/* + * Getting the big tty mutex. + */ + +void tty_lock(struct tty_struct *tty) +{ + if (WARN(tty->magic != TTY_MAGIC, "L Bad %p\n", tty)) + return; + tty_kref_get(tty); + mutex_lock(&tty->legacy_mutex); +} +EXPORT_SYMBOL(tty_lock); + +int tty_lock_interruptible(struct tty_struct *tty) +{ + int ret; + + if (WARN(tty->magic != TTY_MAGIC, "L Bad %p\n", tty)) + return -EIO; + tty_kref_get(tty); + ret = mutex_lock_interruptible(&tty->legacy_mutex); + if (ret) + tty_kref_put(tty); + return ret; +} + +void tty_unlock(struct tty_struct *tty) +{ + if (WARN(tty->magic != TTY_MAGIC, "U Bad %p\n", tty)) + return; + mutex_unlock(&tty->legacy_mutex); + tty_kref_put(tty); +} +EXPORT_SYMBOL(tty_unlock); + +void tty_lock_slave(struct tty_struct *tty) +{ + if (tty && tty != tty->link) + tty_lock(tty); +} + +void tty_unlock_slave(struct tty_struct *tty) +{ + if (tty && tty != tty->link) + tty_unlock(tty); +} + +void tty_set_lock_subclass(struct tty_struct *tty) +{ + lockdep_set_subclass(&tty->legacy_mutex, TTY_LOCK_SLAVE); +} diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c new file mode 100644 index 000000000..cbb56f725 --- /dev/null +++ b/drivers/tty/tty_port.c @@ -0,0 +1,702 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Tty port functions + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "tty.h" + +static int tty_port_default_receive_buf(struct tty_port *port, + const unsigned char *p, + const unsigned char *f, size_t count) +{ + int ret; + struct tty_struct *tty; + struct tty_ldisc *disc; + + tty = READ_ONCE(port->itty); + if (!tty) + return 0; + + disc = tty_ldisc_ref(tty); + if (!disc) + return 0; + + ret = tty_ldisc_receive_buf(disc, p, (char *)f, count); + + tty_ldisc_deref(disc); + + return ret; +} + +static void tty_port_default_wakeup(struct tty_port *port) +{ + struct tty_struct *tty = tty_port_tty_get(port); + + if (tty) { + tty_wakeup(tty); + tty_kref_put(tty); + } +} + +const struct tty_port_client_operations tty_port_default_client_ops = { + .receive_buf = tty_port_default_receive_buf, + .write_wakeup = tty_port_default_wakeup, +}; +EXPORT_SYMBOL_GPL(tty_port_default_client_ops); + +void tty_port_init(struct tty_port *port) +{ + memset(port, 0, sizeof(*port)); + tty_buffer_init(port); + init_waitqueue_head(&port->open_wait); + init_waitqueue_head(&port->delta_msr_wait); + mutex_init(&port->mutex); + mutex_init(&port->buf_mutex); + spin_lock_init(&port->lock); + port->close_delay = (50 * HZ) / 100; + port->closing_wait = (3000 * HZ) / 100; + port->client_ops = &tty_port_default_client_ops; + kref_init(&port->kref); +} +EXPORT_SYMBOL(tty_port_init); + +/** + * tty_port_link_device - link tty and tty_port + * @port: tty_port of the device + * @driver: tty_driver for this device + * @index: index of the tty + * + * Provide the tty layer with a link from a tty (specified by @index) to a + * tty_port (@port). Use this only if neither tty_port_register_device nor + * tty_port_install is used in the driver. If used, this has to be called before + * tty_register_driver. + */ +void tty_port_link_device(struct tty_port *port, + struct tty_driver *driver, unsigned index) +{ + if (WARN_ON(index >= driver->num)) + return; + driver->ports[index] = port; +} +EXPORT_SYMBOL_GPL(tty_port_link_device); + +/** + * tty_port_register_device - register tty device + * @port: tty_port of the device + * @driver: tty_driver for this device + * @index: index of the tty + * @device: parent if exists, otherwise NULL + * + * It is the same as tty_register_device except the provided @port is linked to + * a concrete tty specified by @index. Use this or tty_port_install (or both). + * Call tty_port_link_device as a last resort. + */ +struct device *tty_port_register_device(struct tty_port *port, + struct tty_driver *driver, unsigned index, + struct device *device) +{ + return tty_port_register_device_attr(port, driver, index, device, NULL, NULL); +} +EXPORT_SYMBOL_GPL(tty_port_register_device); + +/** + * tty_port_register_device_attr - register tty device + * @port: tty_port of the device + * @driver: tty_driver for this device + * @index: index of the tty + * @device: parent if exists, otherwise NULL + * @drvdata: Driver data to be set to device. + * @attr_grp: Attribute group to be set on device. + * + * It is the same as tty_register_device_attr except the provided @port is + * linked to a concrete tty specified by @index. Use this or tty_port_install + * (or both). Call tty_port_link_device as a last resort. + */ +struct device *tty_port_register_device_attr(struct tty_port *port, + struct tty_driver *driver, unsigned index, + struct device *device, void *drvdata, + const struct attribute_group **attr_grp) +{ + tty_port_link_device(port, driver, index); + return tty_register_device_attr(driver, index, device, drvdata, + attr_grp); +} +EXPORT_SYMBOL_GPL(tty_port_register_device_attr); + +/** + * tty_port_register_device_attr_serdev - register tty or serdev device + * @port: tty_port of the device + * @driver: tty_driver for this device + * @index: index of the tty + * @device: parent if exists, otherwise NULL + * @drvdata: driver data for the device + * @attr_grp: attribute group for the device + * + * Register a serdev or tty device depending on if the parent device has any + * defined serdev clients or not. + */ +struct device *tty_port_register_device_attr_serdev(struct tty_port *port, + struct tty_driver *driver, unsigned index, + struct device *device, void *drvdata, + const struct attribute_group **attr_grp) +{ + struct device *dev; + + tty_port_link_device(port, driver, index); + + dev = serdev_tty_port_register(port, device, driver, index); + if (PTR_ERR(dev) != -ENODEV) { + /* Skip creating cdev if we registered a serdev device */ + return dev; + } + + return tty_register_device_attr(driver, index, device, drvdata, + attr_grp); +} +EXPORT_SYMBOL_GPL(tty_port_register_device_attr_serdev); + +/** + * tty_port_register_device_serdev - register tty or serdev device + * @port: tty_port of the device + * @driver: tty_driver for this device + * @index: index of the tty + * @device: parent if exists, otherwise NULL + * + * Register a serdev or tty device depending on if the parent device has any + * defined serdev clients or not. + */ +struct device *tty_port_register_device_serdev(struct tty_port *port, + struct tty_driver *driver, unsigned index, + struct device *device) +{ + return tty_port_register_device_attr_serdev(port, driver, index, + device, NULL, NULL); +} +EXPORT_SYMBOL_GPL(tty_port_register_device_serdev); + +/** + * tty_port_unregister_device - deregister a tty or serdev device + * @port: tty_port of the device + * @driver: tty_driver for this device + * @index: index of the tty + * + * If a tty or serdev device is registered with a call to + * tty_port_register_device_serdev() then this function must be called when + * the device is gone. + */ +void tty_port_unregister_device(struct tty_port *port, + struct tty_driver *driver, unsigned index) +{ + int ret; + + ret = serdev_tty_port_unregister(port); + if (ret == 0) + return; + + tty_unregister_device(driver, index); +} +EXPORT_SYMBOL_GPL(tty_port_unregister_device); + +int tty_port_alloc_xmit_buf(struct tty_port *port) +{ + /* We may sleep in get_zeroed_page() */ + mutex_lock(&port->buf_mutex); + if (port->xmit_buf == NULL) + port->xmit_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL); + mutex_unlock(&port->buf_mutex); + if (port->xmit_buf == NULL) + return -ENOMEM; + return 0; +} +EXPORT_SYMBOL(tty_port_alloc_xmit_buf); + +void tty_port_free_xmit_buf(struct tty_port *port) +{ + mutex_lock(&port->buf_mutex); + if (port->xmit_buf != NULL) { + free_page((unsigned long)port->xmit_buf); + port->xmit_buf = NULL; + } + mutex_unlock(&port->buf_mutex); +} +EXPORT_SYMBOL(tty_port_free_xmit_buf); + +/** + * tty_port_destroy -- destroy inited port + * @port: tty port to be destroyed + * + * When a port was initialized using tty_port_init, one has to destroy the + * port by this function. Either indirectly by using tty_port refcounting + * (tty_port_put) or directly if refcounting is not used. + */ +void tty_port_destroy(struct tty_port *port) +{ + tty_buffer_cancel_work(port); + tty_buffer_free_all(port); +} +EXPORT_SYMBOL(tty_port_destroy); + +static void tty_port_destructor(struct kref *kref) +{ + struct tty_port *port = container_of(kref, struct tty_port, kref); + + /* check if last port ref was dropped before tty release */ + if (WARN_ON(port->itty)) + return; + if (port->xmit_buf) + free_page((unsigned long)port->xmit_buf); + tty_port_destroy(port); + if (port->ops && port->ops->destruct) + port->ops->destruct(port); + else + kfree(port); +} + +void tty_port_put(struct tty_port *port) +{ + if (port) + kref_put(&port->kref, tty_port_destructor); +} +EXPORT_SYMBOL(tty_port_put); + +/** + * tty_port_tty_get - get a tty reference + * @port: tty port + * + * Return a refcount protected tty instance or NULL if the port is not + * associated with a tty (eg due to close or hangup) + */ +struct tty_struct *tty_port_tty_get(struct tty_port *port) +{ + unsigned long flags; + struct tty_struct *tty; + + spin_lock_irqsave(&port->lock, flags); + tty = tty_kref_get(port->tty); + spin_unlock_irqrestore(&port->lock, flags); + return tty; +} +EXPORT_SYMBOL(tty_port_tty_get); + +/** + * tty_port_tty_set - set the tty of a port + * @port: tty port + * @tty: the tty + * + * Associate the port and tty pair. Manages any internal refcounts. + * Pass NULL to deassociate a port + */ +void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty) +{ + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + tty_kref_put(port->tty); + port->tty = tty_kref_get(tty); + spin_unlock_irqrestore(&port->lock, flags); +} +EXPORT_SYMBOL(tty_port_tty_set); + +static void tty_port_shutdown(struct tty_port *port, struct tty_struct *tty) +{ + mutex_lock(&port->mutex); + if (port->console) + goto out; + + if (tty_port_initialized(port)) { + tty_port_set_initialized(port, 0); + /* + * Drop DTR/RTS if HUPCL is set. This causes any attached + * modem to hang up the line. + */ + if (tty && C_HUPCL(tty)) + tty_port_lower_dtr_rts(port); + + if (port->ops->shutdown) + port->ops->shutdown(port); + } +out: + mutex_unlock(&port->mutex); +} + +/** + * tty_port_hangup - hangup helper + * @port: tty port + * + * Perform port level tty hangup flag and count changes. Drop the tty + * reference. + * + * Caller holds tty lock. + */ +void tty_port_hangup(struct tty_port *port) +{ + struct tty_struct *tty; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + port->count = 0; + tty = port->tty; + if (tty) + set_bit(TTY_IO_ERROR, &tty->flags); + port->tty = NULL; + spin_unlock_irqrestore(&port->lock, flags); + tty_port_set_active(port, 0); + tty_port_shutdown(port, tty); + tty_kref_put(tty); + wake_up_interruptible(&port->open_wait); + wake_up_interruptible(&port->delta_msr_wait); +} +EXPORT_SYMBOL(tty_port_hangup); + +/** + * tty_port_tty_hangup - helper to hang up a tty + * + * @port: tty port + * @check_clocal: hang only ttys with CLOCAL unset? + */ +void tty_port_tty_hangup(struct tty_port *port, bool check_clocal) +{ + struct tty_struct *tty = tty_port_tty_get(port); + + if (tty && (!check_clocal || !C_CLOCAL(tty))) + tty_hangup(tty); + tty_kref_put(tty); +} +EXPORT_SYMBOL_GPL(tty_port_tty_hangup); + +/** + * tty_port_tty_wakeup - helper to wake up a tty + * + * @port: tty port + */ +void tty_port_tty_wakeup(struct tty_port *port) +{ + port->client_ops->write_wakeup(port); +} +EXPORT_SYMBOL_GPL(tty_port_tty_wakeup); + +/** + * tty_port_carrier_raised - carrier raised check + * @port: tty port + * + * Wrapper for the carrier detect logic. For the moment this is used + * to hide some internal details. This will eventually become entirely + * internal to the tty port. + */ +int tty_port_carrier_raised(struct tty_port *port) +{ + if (port->ops->carrier_raised == NULL) + return 1; + return port->ops->carrier_raised(port); +} +EXPORT_SYMBOL(tty_port_carrier_raised); + +/** + * tty_port_raise_dtr_rts - Raise DTR/RTS + * @port: tty port + * + * Wrapper for the DTR/RTS raise logic. For the moment this is used + * to hide some internal details. This will eventually become entirely + * internal to the tty port. + */ +void tty_port_raise_dtr_rts(struct tty_port *port) +{ + if (port->ops->dtr_rts) + port->ops->dtr_rts(port, 1); +} +EXPORT_SYMBOL(tty_port_raise_dtr_rts); + +/** + * tty_port_lower_dtr_rts - Lower DTR/RTS + * @port: tty port + * + * Wrapper for the DTR/RTS raise logic. For the moment this is used + * to hide some internal details. This will eventually become entirely + * internal to the tty port. + */ +void tty_port_lower_dtr_rts(struct tty_port *port) +{ + if (port->ops->dtr_rts) + port->ops->dtr_rts(port, 0); +} +EXPORT_SYMBOL(tty_port_lower_dtr_rts); + +/** + * tty_port_block_til_ready - Waiting logic for tty open + * @port: the tty port being opened + * @tty: the tty device being bound + * @filp: the file pointer of the opener or NULL + * + * Implement the core POSIX/SuS tty behaviour when opening a tty device. + * Handles: + * - hangup (both before and during) + * - non blocking open + * - rts/dtr/dcd + * - signals + * - port flags and counts + * + * The passed tty_port must implement the carrier_raised method if it can + * do carrier detect and the dtr_rts method if it supports software + * management of these lines. Note that the dtr/rts raise is done each + * iteration as a hangup may have previously dropped them while we wait. + * + * Caller holds tty lock. + * + * NB: May drop and reacquire tty lock when blocking, so tty and tty_port + * may have changed state (eg., may have been hung up). + */ +int tty_port_block_til_ready(struct tty_port *port, + struct tty_struct *tty, struct file *filp) +{ + int do_clocal = 0, retval; + unsigned long flags; + DEFINE_WAIT(wait); + + /* if non-blocking mode is set we can pass directly to open unless + the port has just hung up or is in another error state */ + if (tty_io_error(tty)) { + tty_port_set_active(port, 1); + return 0; + } + if (filp == NULL || (filp->f_flags & O_NONBLOCK)) { + /* Indicate we are open */ + if (C_BAUD(tty)) + tty_port_raise_dtr_rts(port); + tty_port_set_active(port, 1); + return 0; + } + + if (C_CLOCAL(tty)) + do_clocal = 1; + + /* Block waiting until we can proceed. We may need to wait for the + carrier, but we must also wait for any close that is in progress + before the next open may complete */ + + retval = 0; + + /* The port lock protects the port counts */ + spin_lock_irqsave(&port->lock, flags); + port->count--; + port->blocked_open++; + spin_unlock_irqrestore(&port->lock, flags); + + while (1) { + /* Indicate we are open */ + if (C_BAUD(tty) && tty_port_initialized(port)) + tty_port_raise_dtr_rts(port); + + prepare_to_wait(&port->open_wait, &wait, TASK_INTERRUPTIBLE); + /* Check for a hangup or uninitialised port. + Return accordingly */ + if (tty_hung_up_p(filp) || !tty_port_initialized(port)) { + if (port->flags & ASYNC_HUP_NOTIFY) + retval = -EAGAIN; + else + retval = -ERESTARTSYS; + break; + } + /* + * Probe the carrier. For devices with no carrier detect + * tty_port_carrier_raised will always return true. + * Never ask drivers if CLOCAL is set, this causes troubles + * on some hardware. + */ + if (do_clocal || tty_port_carrier_raised(port)) + break; + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } + tty_unlock(tty); + schedule(); + tty_lock(tty); + } + finish_wait(&port->open_wait, &wait); + + /* Update counts. A parallel hangup will have set count to zero and + we must not mess that up further */ + spin_lock_irqsave(&port->lock, flags); + if (!tty_hung_up_p(filp)) + port->count++; + port->blocked_open--; + spin_unlock_irqrestore(&port->lock, flags); + if (retval == 0) + tty_port_set_active(port, 1); + return retval; +} +EXPORT_SYMBOL(tty_port_block_til_ready); + +static void tty_port_drain_delay(struct tty_port *port, struct tty_struct *tty) +{ + unsigned int bps = tty_get_baud_rate(tty); + long timeout; + + if (bps > 1200) { + timeout = (HZ * 10 * port->drain_delay) / bps; + timeout = max_t(long, timeout, HZ / 10); + } else { + timeout = 2 * HZ; + } + schedule_timeout_interruptible(timeout); +} + +/* Caller holds tty lock. */ +int tty_port_close_start(struct tty_port *port, + struct tty_struct *tty, struct file *filp) +{ + unsigned long flags; + + if (tty_hung_up_p(filp)) + return 0; + + spin_lock_irqsave(&port->lock, flags); + if (tty->count == 1 && port->count != 1) { + tty_warn(tty, "%s: tty->count = 1 port count = %d\n", __func__, + port->count); + port->count = 1; + } + if (--port->count < 0) { + tty_warn(tty, "%s: bad port count (%d)\n", __func__, + port->count); + port->count = 0; + } + + if (port->count) { + spin_unlock_irqrestore(&port->lock, flags); + return 0; + } + spin_unlock_irqrestore(&port->lock, flags); + + tty->closing = 1; + + if (tty_port_initialized(port)) { + /* Don't block on a stalled port, just pull the chain */ + if (tty->flow_stopped) + tty_driver_flush_buffer(tty); + if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE) + tty_wait_until_sent(tty, port->closing_wait); + if (port->drain_delay) + tty_port_drain_delay(port, tty); + } + /* Flush the ldisc buffering */ + tty_ldisc_flush(tty); + + /* Report to caller this is the last port reference */ + return 1; +} +EXPORT_SYMBOL(tty_port_close_start); + +/* Caller holds tty lock */ +void tty_port_close_end(struct tty_port *port, struct tty_struct *tty) +{ + unsigned long flags; + + tty_ldisc_flush(tty); + tty->closing = 0; + + spin_lock_irqsave(&port->lock, flags); + + if (port->blocked_open) { + spin_unlock_irqrestore(&port->lock, flags); + if (port->close_delay) + msleep_interruptible(jiffies_to_msecs(port->close_delay)); + spin_lock_irqsave(&port->lock, flags); + wake_up_interruptible(&port->open_wait); + } + spin_unlock_irqrestore(&port->lock, flags); + tty_port_set_active(port, 0); +} +EXPORT_SYMBOL(tty_port_close_end); + +/** + * tty_port_close + * + * Caller holds tty lock + */ +void tty_port_close(struct tty_port *port, struct tty_struct *tty, + struct file *filp) +{ + if (tty_port_close_start(port, tty, filp) == 0) + return; + tty_port_shutdown(port, tty); + if (!port->console) + set_bit(TTY_IO_ERROR, &tty->flags); + tty_port_close_end(port, tty); + tty_port_tty_set(port, NULL); +} +EXPORT_SYMBOL(tty_port_close); + +/** + * tty_port_install - generic tty->ops->install handler + * @port: tty_port of the device + * @driver: tty_driver for this device + * @tty: tty to be installed + * + * It is the same as tty_standard_install except the provided @port is linked + * to a concrete tty specified by @tty. Use this or tty_port_register_device + * (or both). Call tty_port_link_device as a last resort. + */ +int tty_port_install(struct tty_port *port, struct tty_driver *driver, + struct tty_struct *tty) +{ + tty->port = port; + return tty_standard_install(driver, tty); +} +EXPORT_SYMBOL_GPL(tty_port_install); + +/** + * tty_port_open + * + * Caller holds tty lock. + * + * NB: may drop and reacquire tty lock (in tty_port_block_til_ready()) so + * tty and tty_port may have changed state (eg., may be hung up now) + */ +int tty_port_open(struct tty_port *port, struct tty_struct *tty, + struct file *filp) +{ + spin_lock_irq(&port->lock); + ++port->count; + spin_unlock_irq(&port->lock); + tty_port_tty_set(port, tty); + + /* + * Do the device-specific open only if the hardware isn't + * already initialized. Serialize open and shutdown using the + * port mutex. + */ + + mutex_lock(&port->mutex); + + if (!tty_port_initialized(port)) { + clear_bit(TTY_IO_ERROR, &tty->flags); + if (port->ops->activate) { + int retval = port->ops->activate(port, tty); + if (retval) { + mutex_unlock(&port->mutex); + return retval; + } + } + tty_port_set_initialized(port, 1); + } + mutex_unlock(&port->mutex); + return tty_port_block_til_ready(port, tty, filp); +} + +EXPORT_SYMBOL(tty_port_open); diff --git a/drivers/tty/ttynull.c b/drivers/tty/ttynull.c new file mode 100644 index 000000000..17f05b7eb --- /dev/null +++ b/drivers/tty/ttynull.c @@ -0,0 +1,109 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Axis Communications AB + * + * Based on ttyprintk.c: + * Copyright (C) 2010 Samo Pogacnik + */ + +#include +#include +#include + +static const struct tty_port_operations ttynull_port_ops; +static struct tty_driver *ttynull_driver; +static struct tty_port ttynull_port; + +static int ttynull_open(struct tty_struct *tty, struct file *filp) +{ + return tty_port_open(&ttynull_port, tty, filp); +} + +static void ttynull_close(struct tty_struct *tty, struct file *filp) +{ + tty_port_close(&ttynull_port, tty, filp); +} + +static void ttynull_hangup(struct tty_struct *tty) +{ + tty_port_hangup(&ttynull_port); +} + +static int ttynull_write(struct tty_struct *tty, const unsigned char *buf, + int count) +{ + return count; +} + +static int ttynull_write_room(struct tty_struct *tty) +{ + return 65536; +} + +static const struct tty_operations ttynull_ops = { + .open = ttynull_open, + .close = ttynull_close, + .hangup = ttynull_hangup, + .write = ttynull_write, + .write_room = ttynull_write_room, +}; + +static struct tty_driver *ttynull_device(struct console *c, int *index) +{ + *index = 0; + return ttynull_driver; +} + +static struct console ttynull_console = { + .name = "ttynull", + .device = ttynull_device, +}; + +static int __init ttynull_init(void) +{ + struct tty_driver *driver; + int ret; + + driver = tty_alloc_driver(1, + TTY_DRIVER_RESET_TERMIOS | + TTY_DRIVER_REAL_RAW | + TTY_DRIVER_UNNUMBERED_NODE); + if (IS_ERR(driver)) + return PTR_ERR(driver); + + tty_port_init(&ttynull_port); + ttynull_port.ops = &ttynull_port_ops; + + driver->driver_name = "ttynull"; + driver->name = "ttynull"; + driver->type = TTY_DRIVER_TYPE_CONSOLE; + driver->init_termios = tty_std_termios; + driver->init_termios.c_oflag = OPOST | OCRNL | ONOCR | ONLRET; + tty_set_operations(driver, &ttynull_ops); + tty_port_link_device(&ttynull_port, driver, 0); + + ret = tty_register_driver(driver); + if (ret < 0) { + put_tty_driver(driver); + tty_port_destroy(&ttynull_port); + return ret; + } + + ttynull_driver = driver; + register_console(&ttynull_console); + + return 0; +} + +static void __exit ttynull_exit(void) +{ + unregister_console(&ttynull_console); + tty_unregister_driver(ttynull_driver); + put_tty_driver(ttynull_driver); + tty_port_destroy(&ttynull_port); +} + +module_init(ttynull_init); +module_exit(ttynull_exit); + +MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/vcc.c b/drivers/tty/vcc.c new file mode 100644 index 000000000..6b2d35ac6 --- /dev/null +++ b/drivers/tty/vcc.c @@ -0,0 +1,1154 @@ +// SPDX-License-Identifier: GPL-2.0 +/* vcc.c: sun4v virtual channel concentrator + * + * Copyright (C) 2017 Oracle. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_MODULE_NAME "vcc" +#define DRV_MODULE_VERSION "1.1" +#define DRV_MODULE_RELDATE "July 1, 2017" + +static char version[] = + DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")"; + +MODULE_DESCRIPTION("Sun LDOM virtual console concentrator driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_MODULE_VERSION); + +struct vcc_port { + struct vio_driver_state vio; + + spinlock_t lock; + char *domain; + struct tty_struct *tty; /* only populated while dev is open */ + unsigned long index; /* index into the vcc_table */ + + u64 refcnt; + bool excl_locked; + + bool removed; + + /* This buffer is required to support the tty write_room interface + * and guarantee that any characters that the driver accepts will + * be eventually sent, either immediately or later. + */ + int chars_in_buffer; + struct vio_vcc buffer; + + struct timer_list rx_timer; + struct timer_list tx_timer; +}; + +/* Microseconds that thread will delay waiting for a vcc port ref */ +#define VCC_REF_DELAY 100 + +#define VCC_MAX_PORTS 1024 +#define VCC_MINOR_START 0 /* must be zero */ +#define VCC_BUFF_LEN VIO_VCC_MTU_SIZE + +#define VCC_CTL_BREAK -1 +#define VCC_CTL_HUP -2 + +static const char vcc_driver_name[] = "vcc"; +static const char vcc_device_node[] = "vcc"; +static struct tty_driver *vcc_tty_driver; + +static struct vcc_port *vcc_table[VCC_MAX_PORTS]; +static DEFINE_SPINLOCK(vcc_table_lock); + +int vcc_dbg; +int vcc_dbg_ldc; +int vcc_dbg_vio; + +module_param(vcc_dbg, uint, 0664); +module_param(vcc_dbg_ldc, uint, 0664); +module_param(vcc_dbg_vio, uint, 0664); + +#define VCC_DBG_DRV 0x1 +#define VCC_DBG_LDC 0x2 +#define VCC_DBG_PKT 0x4 + +#define vccdbg(f, a...) \ + do { \ + if (vcc_dbg & VCC_DBG_DRV) \ + pr_info(f, ## a); \ + } while (0) \ + +#define vccdbgl(l) \ + do { \ + if (vcc_dbg & VCC_DBG_LDC) \ + ldc_print(l); \ + } while (0) \ + +#define vccdbgp(pkt) \ + do { \ + if (vcc_dbg & VCC_DBG_PKT) { \ + int i; \ + for (i = 0; i < pkt.tag.stype; i++) \ + pr_info("[%c]", pkt.data[i]); \ + } \ + } while (0) \ + +/* Note: Be careful when adding flags to this line discipline. Don't + * add anything that will cause echoing or we'll go into recursive + * loop echoing chars back and forth with the console drivers. + */ +static const struct ktermios vcc_tty_termios = { + .c_iflag = IGNBRK | IGNPAR, + .c_oflag = OPOST, + .c_cflag = B38400 | CS8 | CREAD | HUPCL, + .c_cc = INIT_C_CC, + .c_ispeed = 38400, + .c_ospeed = 38400 +}; + +/** + * vcc_table_add() - Add VCC port to the VCC table + * @port: pointer to the VCC port + * + * Return: index of the port in the VCC table on success, + * -1 on failure + */ +static int vcc_table_add(struct vcc_port *port) +{ + unsigned long flags; + int i; + + spin_lock_irqsave(&vcc_table_lock, flags); + for (i = VCC_MINOR_START; i < VCC_MAX_PORTS; i++) { + if (!vcc_table[i]) { + vcc_table[i] = port; + break; + } + } + spin_unlock_irqrestore(&vcc_table_lock, flags); + + if (i < VCC_MAX_PORTS) + return i; + else + return -1; +} + +/** + * vcc_table_remove() - Removes a VCC port from the VCC table + * @index: Index into the VCC table + */ +static void vcc_table_remove(unsigned long index) +{ + unsigned long flags; + + if (WARN_ON(index >= VCC_MAX_PORTS)) + return; + + spin_lock_irqsave(&vcc_table_lock, flags); + vcc_table[index] = NULL; + spin_unlock_irqrestore(&vcc_table_lock, flags); +} + +/** + * vcc_get() - Gets a reference to VCC port + * @index: Index into the VCC table + * @excl: Indicates if an exclusive access is requested + * + * Return: reference to the VCC port, if found + * NULL, if port not found + */ +static struct vcc_port *vcc_get(unsigned long index, bool excl) +{ + struct vcc_port *port; + unsigned long flags; + +try_again: + spin_lock_irqsave(&vcc_table_lock, flags); + + port = vcc_table[index]; + if (!port) { + spin_unlock_irqrestore(&vcc_table_lock, flags); + return NULL; + } + + if (!excl) { + if (port->excl_locked) { + spin_unlock_irqrestore(&vcc_table_lock, flags); + udelay(VCC_REF_DELAY); + goto try_again; + } + port->refcnt++; + spin_unlock_irqrestore(&vcc_table_lock, flags); + return port; + } + + if (port->refcnt) { + spin_unlock_irqrestore(&vcc_table_lock, flags); + /* Threads wanting exclusive access will wait half the time, + * probably giving them higher priority in the case of + * multiple waiters. + */ + udelay(VCC_REF_DELAY/2); + goto try_again; + } + + port->refcnt++; + port->excl_locked = true; + spin_unlock_irqrestore(&vcc_table_lock, flags); + + return port; +} + +/** + * vcc_put() - Returns a reference to VCC port + * @port: pointer to VCC port + * @excl: Indicates if the returned reference is an exclusive reference + * + * Note: It's the caller's responsibility to ensure the correct value + * for the excl flag + */ +static void vcc_put(struct vcc_port *port, bool excl) +{ + unsigned long flags; + + if (!port) + return; + + spin_lock_irqsave(&vcc_table_lock, flags); + + /* check if caller attempted to put with the wrong flags */ + if (WARN_ON((excl && !port->excl_locked) || + (!excl && port->excl_locked))) + goto done; + + port->refcnt--; + + if (excl) + port->excl_locked = false; + +done: + spin_unlock_irqrestore(&vcc_table_lock, flags); +} + +/** + * vcc_get_ne() - Get a non-exclusive reference to VCC port + * @index: Index into the VCC table + * + * Gets a non-exclusive reference to VCC port, if it's not removed + * + * Return: pointer to the VCC port, if found + * NULL, if port not found + */ +static struct vcc_port *vcc_get_ne(unsigned long index) +{ + struct vcc_port *port; + + port = vcc_get(index, false); + + if (port && port->removed) { + vcc_put(port, false); + return NULL; + } + + return port; +} + +static void vcc_kick_rx(struct vcc_port *port) +{ + struct vio_driver_state *vio = &port->vio; + + assert_spin_locked(&port->lock); + + if (!timer_pending(&port->rx_timer) && !port->removed) { + disable_irq_nosync(vio->vdev->rx_irq); + port->rx_timer.expires = (jiffies + 1); + add_timer(&port->rx_timer); + } +} + +static void vcc_kick_tx(struct vcc_port *port) +{ + assert_spin_locked(&port->lock); + + if (!timer_pending(&port->tx_timer) && !port->removed) { + port->tx_timer.expires = (jiffies + 1); + add_timer(&port->tx_timer); + } +} + +static int vcc_rx_check(struct tty_struct *tty, int size) +{ + if (WARN_ON(!tty || !tty->port)) + return 1; + + /* tty_buffer_request_room won't sleep because it uses + * GFP_ATOMIC flag to allocate buffer + */ + if (test_bit(TTY_THROTTLED, &tty->flags) || + (tty_buffer_request_room(tty->port, VCC_BUFF_LEN) < VCC_BUFF_LEN)) + return 0; + + return 1; +} + +static int vcc_rx(struct tty_struct *tty, char *buf, int size) +{ + int len = 0; + + if (WARN_ON(!tty || !tty->port)) + return len; + + len = tty_insert_flip_string(tty->port, buf, size); + if (len) + tty_flip_buffer_push(tty->port); + + return len; +} + +static int vcc_ldc_read(struct vcc_port *port) +{ + struct vio_driver_state *vio = &port->vio; + struct tty_struct *tty; + struct vio_vcc pkt; + int rv = 0; + + tty = port->tty; + if (!tty) { + rv = ldc_rx_reset(vio->lp); + vccdbg("VCC: reset rx q: rv=%d\n", rv); + goto done; + } + + /* Read as long as LDC has incoming data. */ + while (1) { + if (!vcc_rx_check(tty, VIO_VCC_MTU_SIZE)) { + vcc_kick_rx(port); + break; + } + + vccdbgl(vio->lp); + + rv = ldc_read(vio->lp, &pkt, sizeof(pkt)); + if (rv <= 0) + break; + + vccdbg("VCC: ldc_read()=%d\n", rv); + vccdbg("TAG [%02x:%02x:%04x:%08x]\n", + pkt.tag.type, pkt.tag.stype, + pkt.tag.stype_env, pkt.tag.sid); + + if (pkt.tag.type == VIO_TYPE_DATA) { + vccdbgp(pkt); + /* vcc_rx_check ensures memory availability */ + vcc_rx(tty, pkt.data, pkt.tag.stype); + } else { + pr_err("VCC: unknown msg [%02x:%02x:%04x:%08x]\n", + pkt.tag.type, pkt.tag.stype, + pkt.tag.stype_env, pkt.tag.sid); + rv = -ECONNRESET; + break; + } + + WARN_ON(rv != LDC_PACKET_SIZE); + } + +done: + return rv; +} + +static void vcc_rx_timer(struct timer_list *t) +{ + struct vcc_port *port = from_timer(port, t, rx_timer); + struct vio_driver_state *vio; + unsigned long flags; + int rv; + + spin_lock_irqsave(&port->lock, flags); + port->rx_timer.expires = 0; + + vio = &port->vio; + + enable_irq(vio->vdev->rx_irq); + + if (!port->tty || port->removed) + goto done; + + rv = vcc_ldc_read(port); + if (rv == -ECONNRESET) + vio_conn_reset(vio); + +done: + spin_unlock_irqrestore(&port->lock, flags); + vcc_put(port, false); +} + +static void vcc_tx_timer(struct timer_list *t) +{ + struct vcc_port *port = from_timer(port, t, tx_timer); + struct vio_vcc *pkt; + unsigned long flags; + int tosend = 0; + int rv; + + spin_lock_irqsave(&port->lock, flags); + port->tx_timer.expires = 0; + + if (!port->tty || port->removed) + goto done; + + tosend = min(VCC_BUFF_LEN, port->chars_in_buffer); + if (!tosend) + goto done; + + pkt = &port->buffer; + pkt->tag.type = VIO_TYPE_DATA; + pkt->tag.stype = tosend; + vccdbgl(port->vio.lp); + + rv = ldc_write(port->vio.lp, pkt, (VIO_TAG_SIZE + tosend)); + WARN_ON(!rv); + + if (rv < 0) { + vccdbg("VCC: ldc_write()=%d\n", rv); + vcc_kick_tx(port); + } else { + struct tty_struct *tty = port->tty; + + port->chars_in_buffer = 0; + if (tty) + tty_wakeup(tty); + } + +done: + spin_unlock_irqrestore(&port->lock, flags); + vcc_put(port, false); +} + +/** + * vcc_event() - LDC event processing engine + * @arg: VCC private data + * @event: LDC event + * + * Handles LDC events for VCC + */ +static void vcc_event(void *arg, int event) +{ + struct vio_driver_state *vio; + struct vcc_port *port; + unsigned long flags; + int rv; + + port = arg; + vio = &port->vio; + + spin_lock_irqsave(&port->lock, flags); + + switch (event) { + case LDC_EVENT_RESET: + case LDC_EVENT_UP: + vio_link_state_change(vio, event); + break; + + case LDC_EVENT_DATA_READY: + rv = vcc_ldc_read(port); + if (rv == -ECONNRESET) + vio_conn_reset(vio); + break; + + default: + pr_err("VCC: unexpected LDC event(%d)\n", event); + } + + spin_unlock_irqrestore(&port->lock, flags); +} + +static struct ldc_channel_config vcc_ldc_cfg = { + .event = vcc_event, + .mtu = VIO_VCC_MTU_SIZE, + .mode = LDC_MODE_RAW, + .debug = 0, +}; + +/* Ordered from largest major to lowest */ +static struct vio_version vcc_versions[] = { + { .major = 1, .minor = 0 }, +}; + +static struct tty_port_operations vcc_port_ops = { 0 }; + +static ssize_t vcc_sysfs_domain_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct vcc_port *port; + int rv; + + port = dev_get_drvdata(dev); + if (!port) + return -ENODEV; + + rv = scnprintf(buf, PAGE_SIZE, "%s\n", port->domain); + + return rv; +} + +static int vcc_send_ctl(struct vcc_port *port, int ctl) +{ + struct vio_vcc pkt; + int rv; + + pkt.tag.type = VIO_TYPE_CTRL; + pkt.tag.sid = ctl; + pkt.tag.stype = 0; + + rv = ldc_write(port->vio.lp, &pkt, sizeof(pkt.tag)); + WARN_ON(!rv); + vccdbg("VCC: ldc_write(%ld)=%d\n", sizeof(pkt.tag), rv); + + return rv; +} + +static ssize_t vcc_sysfs_break_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct vcc_port *port; + unsigned long flags; + int rv = count; + int brk; + + port = dev_get_drvdata(dev); + if (!port) + return -ENODEV; + + spin_lock_irqsave(&port->lock, flags); + + if (sscanf(buf, "%ud", &brk) != 1 || brk != 1) + rv = -EINVAL; + else if (vcc_send_ctl(port, VCC_CTL_BREAK) < 0) + vcc_kick_tx(port); + + spin_unlock_irqrestore(&port->lock, flags); + + return rv; +} + +static DEVICE_ATTR(domain, 0400, vcc_sysfs_domain_show, NULL); +static DEVICE_ATTR(break, 0200, NULL, vcc_sysfs_break_store); + +static struct attribute *vcc_sysfs_entries[] = { + &dev_attr_domain.attr, + &dev_attr_break.attr, + NULL +}; + +static struct attribute_group vcc_attribute_group = { + .name = NULL, + .attrs = vcc_sysfs_entries, +}; + +/** + * vcc_probe() - Initialize VCC port + * @vdev: Pointer to VIO device of the new VCC port + * @id: VIO device ID + * + * Initializes a VCC port to receive serial console data from + * the guest domain. Sets up a TTY end point on the control + * domain. Sets up VIO/LDC link between the guest & control + * domain endpoints. + * + * Return: status of the probe + */ +static int vcc_probe(struct vio_dev *vdev, const struct vio_device_id *id) +{ + struct mdesc_handle *hp; + struct vcc_port *port; + struct device *dev; + const char *domain; + char *name; + u64 node; + int rv; + + vccdbg("VCC: name=%s\n", dev_name(&vdev->dev)); + + if (!vcc_tty_driver) { + pr_err("VCC: TTY driver not registered\n"); + return -ENODEV; + } + + port = kzalloc(sizeof(struct vcc_port), GFP_KERNEL); + if (!port) + return -ENOMEM; + + name = kstrdup(dev_name(&vdev->dev), GFP_KERNEL); + if (!name) { + rv = -ENOMEM; + goto free_port; + } + + rv = vio_driver_init(&port->vio, vdev, VDEV_CONSOLE_CON, vcc_versions, + ARRAY_SIZE(vcc_versions), NULL, name); + if (rv) + goto free_name; + + port->vio.debug = vcc_dbg_vio; + vcc_ldc_cfg.debug = vcc_dbg_ldc; + + rv = vio_ldc_alloc(&port->vio, &vcc_ldc_cfg, port); + if (rv) + goto free_name; + + spin_lock_init(&port->lock); + + port->index = vcc_table_add(port); + if (port->index == -1) { + pr_err("VCC: no more TTY indices left for allocation\n"); + rv = -ENOMEM; + goto free_ldc; + } + + /* Register the device using VCC table index as TTY index */ + dev = tty_register_device(vcc_tty_driver, port->index, &vdev->dev); + if (IS_ERR(dev)) { + rv = PTR_ERR(dev); + goto free_table; + } + + hp = mdesc_grab(); + + node = vio_vdev_node(hp, vdev); + if (node == MDESC_NODE_NULL) { + rv = -ENXIO; + mdesc_release(hp); + goto unreg_tty; + } + + domain = mdesc_get_property(hp, node, "vcc-domain-name", NULL); + if (!domain) { + rv = -ENXIO; + mdesc_release(hp); + goto unreg_tty; + } + port->domain = kstrdup(domain, GFP_KERNEL); + if (!port->domain) { + rv = -ENOMEM; + goto unreg_tty; + } + + + mdesc_release(hp); + + rv = sysfs_create_group(&vdev->dev.kobj, &vcc_attribute_group); + if (rv) + goto free_domain; + + timer_setup(&port->rx_timer, vcc_rx_timer, 0); + timer_setup(&port->tx_timer, vcc_tx_timer, 0); + + dev_set_drvdata(&vdev->dev, port); + + /* It's possible to receive IRQs in the middle of vio_port_up. Disable + * IRQs until the port is up. + */ + disable_irq_nosync(vdev->rx_irq); + vio_port_up(&port->vio); + enable_irq(vdev->rx_irq); + + return 0; + +free_domain: + kfree(port->domain); +unreg_tty: + tty_unregister_device(vcc_tty_driver, port->index); +free_table: + vcc_table_remove(port->index); +free_ldc: + vio_ldc_free(&port->vio); +free_name: + kfree(name); +free_port: + kfree(port); + + return rv; +} + +/** + * vcc_remove() - Terminate a VCC port + * @vdev: Pointer to VIO device of the VCC port + * + * Terminates a VCC port. Sets up the teardown of TTY and + * VIO/LDC link between guest and primary domains. + * + * Return: status of removal + */ +static int vcc_remove(struct vio_dev *vdev) +{ + struct vcc_port *port = dev_get_drvdata(&vdev->dev); + + if (!port) + return -ENODEV; + + del_timer_sync(&port->rx_timer); + del_timer_sync(&port->tx_timer); + + /* If there's a process with the device open, do a synchronous + * hangup of the TTY. This *may* cause the process to call close + * asynchronously, but it's not guaranteed. + */ + if (port->tty) + tty_vhangup(port->tty); + + /* Get exclusive reference to VCC, ensures that there are no other + * clients to this port + */ + port = vcc_get(port->index, true); + + if (WARN_ON(!port)) + return -ENODEV; + + tty_unregister_device(vcc_tty_driver, port->index); + + del_timer_sync(&port->vio.timer); + vio_ldc_free(&port->vio); + sysfs_remove_group(&vdev->dev.kobj, &vcc_attribute_group); + dev_set_drvdata(&vdev->dev, NULL); + if (port->tty) { + port->removed = true; + vcc_put(port, true); + } else { + vcc_table_remove(port->index); + + kfree(port->vio.name); + kfree(port->domain); + kfree(port); + } + + return 0; +} + +static const struct vio_device_id vcc_match[] = { + { + .type = "vcc-port", + }, + {}, +}; +MODULE_DEVICE_TABLE(vio, vcc_match); + +static struct vio_driver vcc_driver = { + .id_table = vcc_match, + .probe = vcc_probe, + .remove = vcc_remove, + .name = "vcc", +}; + +static int vcc_open(struct tty_struct *tty, struct file *vcc_file) +{ + struct vcc_port *port; + + if (unlikely(!tty)) { + pr_err("VCC: open: Invalid TTY handle\n"); + return -ENXIO; + } + + if (tty->count > 1) + return -EBUSY; + + port = vcc_get_ne(tty->index); + if (unlikely(!port)) { + pr_err("VCC: open: Failed to find VCC port\n"); + return -ENODEV; + } + + if (unlikely(!port->vio.lp)) { + pr_err("VCC: open: LDC channel not configured\n"); + vcc_put(port, false); + return -EPIPE; + } + vccdbgl(port->vio.lp); + + vcc_put(port, false); + + if (unlikely(!tty->port)) { + pr_err("VCC: open: TTY port not found\n"); + return -ENXIO; + } + + if (unlikely(!tty->port->ops)) { + pr_err("VCC: open: TTY ops not defined\n"); + return -ENXIO; + } + + return tty_port_open(tty->port, tty, vcc_file); +} + +static void vcc_close(struct tty_struct *tty, struct file *vcc_file) +{ + if (unlikely(!tty)) { + pr_err("VCC: close: Invalid TTY handle\n"); + return; + } + + if (unlikely(tty->count > 1)) + return; + + if (unlikely(!tty->port)) { + pr_err("VCC: close: TTY port not found\n"); + return; + } + + tty_port_close(tty->port, tty, vcc_file); +} + +static void vcc_ldc_hup(struct vcc_port *port) +{ + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + if (vcc_send_ctl(port, VCC_CTL_HUP) < 0) + vcc_kick_tx(port); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void vcc_hangup(struct tty_struct *tty) +{ + struct vcc_port *port; + + if (unlikely(!tty)) { + pr_err("VCC: hangup: Invalid TTY handle\n"); + return; + } + + port = vcc_get_ne(tty->index); + if (unlikely(!port)) { + pr_err("VCC: hangup: Failed to find VCC port\n"); + return; + } + + if (unlikely(!tty->port)) { + pr_err("VCC: hangup: TTY port not found\n"); + vcc_put(port, false); + return; + } + + vcc_ldc_hup(port); + + vcc_put(port, false); + + tty_port_hangup(tty->port); +} + +static int vcc_write(struct tty_struct *tty, const unsigned char *buf, + int count) +{ + struct vcc_port *port; + struct vio_vcc *pkt; + unsigned long flags; + int total_sent = 0; + int tosend = 0; + int rv = -EINVAL; + + if (unlikely(!tty)) { + pr_err("VCC: write: Invalid TTY handle\n"); + return -ENXIO; + } + + port = vcc_get_ne(tty->index); + if (unlikely(!port)) { + pr_err("VCC: write: Failed to find VCC port"); + return -ENODEV; + } + + spin_lock_irqsave(&port->lock, flags); + + pkt = &port->buffer; + pkt->tag.type = VIO_TYPE_DATA; + + while (count > 0) { + /* Minimum of data to write and space available */ + tosend = min(count, (VCC_BUFF_LEN - port->chars_in_buffer)); + + if (!tosend) + break; + + memcpy(&pkt->data[port->chars_in_buffer], &buf[total_sent], + tosend); + port->chars_in_buffer += tosend; + pkt->tag.stype = tosend; + + vccdbg("TAG [%02x:%02x:%04x:%08x]\n", pkt->tag.type, + pkt->tag.stype, pkt->tag.stype_env, pkt->tag.sid); + vccdbg("DATA [%s]\n", pkt->data); + vccdbgl(port->vio.lp); + + /* Since we know we have enough room in VCC buffer for tosend + * we record that it was sent regardless of whether the + * hypervisor actually took it because we have it buffered. + */ + rv = ldc_write(port->vio.lp, pkt, (VIO_TAG_SIZE + tosend)); + vccdbg("VCC: write: ldc_write(%d)=%d\n", + (VIO_TAG_SIZE + tosend), rv); + + total_sent += tosend; + count -= tosend; + if (rv < 0) { + vcc_kick_tx(port); + break; + } + + port->chars_in_buffer = 0; + } + + spin_unlock_irqrestore(&port->lock, flags); + + vcc_put(port, false); + + vccdbg("VCC: write: total=%d rv=%d", total_sent, rv); + + return total_sent ? total_sent : rv; +} + +static int vcc_write_room(struct tty_struct *tty) +{ + struct vcc_port *port; + u64 num; + + if (unlikely(!tty)) { + pr_err("VCC: write_room: Invalid TTY handle\n"); + return -ENXIO; + } + + port = vcc_get_ne(tty->index); + if (unlikely(!port)) { + pr_err("VCC: write_room: Failed to find VCC port\n"); + return -ENODEV; + } + + num = VCC_BUFF_LEN - port->chars_in_buffer; + + vcc_put(port, false); + + return num; +} + +static int vcc_chars_in_buffer(struct tty_struct *tty) +{ + struct vcc_port *port; + u64 num; + + if (unlikely(!tty)) { + pr_err("VCC: chars_in_buffer: Invalid TTY handle\n"); + return -ENXIO; + } + + port = vcc_get_ne(tty->index); + if (unlikely(!port)) { + pr_err("VCC: chars_in_buffer: Failed to find VCC port\n"); + return -ENODEV; + } + + num = port->chars_in_buffer; + + vcc_put(port, false); + + return num; +} + +static int vcc_break_ctl(struct tty_struct *tty, int state) +{ + struct vcc_port *port; + unsigned long flags; + + if (unlikely(!tty)) { + pr_err("VCC: break_ctl: Invalid TTY handle\n"); + return -ENXIO; + } + + port = vcc_get_ne(tty->index); + if (unlikely(!port)) { + pr_err("VCC: break_ctl: Failed to find VCC port\n"); + return -ENODEV; + } + + /* Turn off break */ + if (state == 0) { + vcc_put(port, false); + return 0; + } + + spin_lock_irqsave(&port->lock, flags); + + if (vcc_send_ctl(port, VCC_CTL_BREAK) < 0) + vcc_kick_tx(port); + + spin_unlock_irqrestore(&port->lock, flags); + + vcc_put(port, false); + + return 0; +} + +static int vcc_install(struct tty_driver *driver, struct tty_struct *tty) +{ + struct vcc_port *port_vcc; + struct tty_port *port_tty; + int ret; + + if (unlikely(!tty)) { + pr_err("VCC: install: Invalid TTY handle\n"); + return -ENXIO; + } + + if (tty->index >= VCC_MAX_PORTS) + return -EINVAL; + + ret = tty_standard_install(driver, tty); + if (ret) + return ret; + + port_tty = kzalloc(sizeof(struct tty_port), GFP_KERNEL); + if (!port_tty) + return -ENOMEM; + + port_vcc = vcc_get(tty->index, true); + if (!port_vcc) { + pr_err("VCC: install: Failed to find VCC port\n"); + tty->port = NULL; + kfree(port_tty); + return -ENODEV; + } + + tty_port_init(port_tty); + port_tty->ops = &vcc_port_ops; + tty->port = port_tty; + + port_vcc->tty = tty; + + vcc_put(port_vcc, true); + + return 0; +} + +static void vcc_cleanup(struct tty_struct *tty) +{ + struct vcc_port *port; + + if (unlikely(!tty)) { + pr_err("VCC: cleanup: Invalid TTY handle\n"); + return; + } + + port = vcc_get(tty->index, true); + if (port) { + port->tty = NULL; + + if (port->removed) { + vcc_table_remove(tty->index); + kfree(port->vio.name); + kfree(port->domain); + kfree(port); + } else { + vcc_put(port, true); + } + } + + tty_port_destroy(tty->port); + kfree(tty->port); + tty->port = NULL; +} + +static const struct tty_operations vcc_ops = { + .open = vcc_open, + .close = vcc_close, + .hangup = vcc_hangup, + .write = vcc_write, + .write_room = vcc_write_room, + .chars_in_buffer = vcc_chars_in_buffer, + .break_ctl = vcc_break_ctl, + .install = vcc_install, + .cleanup = vcc_cleanup, +}; + +#define VCC_TTY_FLAGS (TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_REAL_RAW) + +static int vcc_tty_init(void) +{ + int rv; + + pr_info("VCC: %s\n", version); + + vcc_tty_driver = tty_alloc_driver(VCC_MAX_PORTS, VCC_TTY_FLAGS); + if (IS_ERR(vcc_tty_driver)) { + pr_err("VCC: TTY driver alloc failed\n"); + return PTR_ERR(vcc_tty_driver); + } + + vcc_tty_driver->driver_name = vcc_driver_name; + vcc_tty_driver->name = vcc_device_node; + + vcc_tty_driver->minor_start = VCC_MINOR_START; + vcc_tty_driver->type = TTY_DRIVER_TYPE_SYSTEM; + vcc_tty_driver->init_termios = vcc_tty_termios; + + tty_set_operations(vcc_tty_driver, &vcc_ops); + + rv = tty_register_driver(vcc_tty_driver); + if (rv) { + pr_err("VCC: TTY driver registration failed\n"); + put_tty_driver(vcc_tty_driver); + vcc_tty_driver = NULL; + return rv; + } + + vccdbg("VCC: TTY driver registered\n"); + + return 0; +} + +static void vcc_tty_exit(void) +{ + tty_unregister_driver(vcc_tty_driver); + put_tty_driver(vcc_tty_driver); + vccdbg("VCC: TTY driver unregistered\n"); + + vcc_tty_driver = NULL; +} + +static int __init vcc_init(void) +{ + int rv; + + rv = vcc_tty_init(); + if (rv) { + pr_err("VCC: TTY init failed\n"); + return rv; + } + + rv = vio_register_driver(&vcc_driver); + if (rv) { + pr_err("VCC: VIO driver registration failed\n"); + vcc_tty_exit(); + } else { + vccdbg("VCC: VIO driver registered successfully\n"); + } + + return rv; +} + +static void __exit vcc_exit(void) +{ + vio_unregister_driver(&vcc_driver); + vccdbg("VCC: VIO driver unregistered\n"); + vcc_tty_exit(); + vccdbg("VCC: TTY driver unregistered\n"); +} + +module_init(vcc_init); +module_exit(vcc_exit); diff --git a/drivers/tty/vt/.gitignore b/drivers/tty/vt/.gitignore new file mode 100644 index 000000000..3ecf42234 --- /dev/null +++ b/drivers/tty/vt/.gitignore @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 +conmakehash +consolemap_deftbl.c +defkeymap.c diff --git a/drivers/tty/vt/Makefile b/drivers/tty/vt/Makefile new file mode 100644 index 000000000..fe30ce512 --- /dev/null +++ b/drivers/tty/vt/Makefile @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# This file contains the font map for the default (hardware) font +# +FONTMAPFILE = cp437.uni + +obj-$(CONFIG_VT) += vt_ioctl.o vc_screen.o \ + selection.o keyboard.o +obj-$(CONFIG_CONSOLE_TRANSLATIONS) += consolemap.o consolemap_deftbl.o +obj-$(CONFIG_HW_CONSOLE) += vt.o defkeymap.o + +# Files generated that shall be removed upon make clean +clean-files := consolemap_deftbl.c defkeymap.c + +hostprogs += conmakehash + +quiet_cmd_conmk = CONMK $@ + cmd_conmk = $(obj)/conmakehash $< > $@ + +$(obj)/consolemap_deftbl.c: $(src)/$(FONTMAPFILE) $(obj)/conmakehash + $(call cmd,conmk) + +$(obj)/defkeymap.o: $(obj)/defkeymap.c + +# Uncomment if you're changing the keymap and have an appropriate +# loadkeys version for the map. By default, we'll use the shipped +# versions. +# GENERATE_KEYMAP := 1 + +ifdef GENERATE_KEYMAP + +$(obj)/defkeymap.c: $(obj)/%.c: $(src)/%.map + loadkeys --mktable $< > $@ + +endif diff --git a/drivers/tty/vt/conmakehash.c b/drivers/tty/vt/conmakehash.c new file mode 100644 index 000000000..cddd789fe --- /dev/null +++ b/drivers/tty/vt/conmakehash.c @@ -0,0 +1,290 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * conmakehash.c + * + * Create arrays for initializing the kernel folded tables (using a hash + * table turned out to be to limiting...) Unfortunately we can't simply + * preinitialize the tables at compile time since kfree() cannot accept + * memory not allocated by kmalloc(), and doing our own memory management + * just for this seems like massive overkill. + * + * Copyright (C) 1995-1997 H. Peter Anvin + */ + +#include +#include +#include +#include +#include + +#define MAX_FONTLEN 256 + +typedef unsigned short unicode; + +static void usage(char *argv0) +{ + fprintf(stderr, "Usage: \n" + " %s chartable [hashsize] [hashstep] [maxhashlevel]\n", argv0); + exit(EX_USAGE); +} + +static int getunicode(char **p0) +{ + char *p = *p0; + + while (*p == ' ' || *p == '\t') + p++; + if (*p != 'U' || p[1] != '+' || + !isxdigit(p[2]) || !isxdigit(p[3]) || !isxdigit(p[4]) || + !isxdigit(p[5]) || isxdigit(p[6])) + return -1; + *p0 = p+6; + return strtol(p+2,0,16); +} + +unicode unitable[MAX_FONTLEN][255]; + /* Massive overkill, but who cares? */ +int unicount[MAX_FONTLEN]; + +static void addpair(int fp, int un) +{ + int i; + + if ( un <= 0xfffe ) + { + /* Check it isn't a duplicate */ + + for ( i = 0 ; i < unicount[fp] ; i++ ) + if ( unitable[fp][i] == un ) + return; + + /* Add to list */ + + if ( unicount[fp] > 254 ) + { + fprintf(stderr, "ERROR: Only 255 unicodes/glyph permitted!\n"); + exit(EX_DATAERR); + } + + unitable[fp][unicount[fp]] = un; + unicount[fp]++; + } + + /* otherwise: ignore */ +} + +int main(int argc, char *argv[]) +{ + FILE *ctbl; + char *tblname; + char buffer[65536]; + int fontlen; + int i, nuni, nent; + int fp0, fp1, un0, un1; + char *p, *p1; + + if ( argc < 2 || argc > 5 ) + usage(argv[0]); + + if ( !strcmp(argv[1],"-") ) + { + ctbl = stdin; + tblname = "stdin"; + } + else + { + ctbl = fopen(tblname = argv[1], "r"); + if ( !ctbl ) + { + perror(tblname); + exit(EX_NOINPUT); + } + } + + /* For now we assume the default font is always 256 characters. */ + fontlen = 256; + + /* Initialize table */ + + for ( i = 0 ; i < fontlen ; i++ ) + unicount[i] = 0; + + /* Now we come to the tricky part. Parse the input table. */ + + while ( fgets(buffer, sizeof(buffer), ctbl) != NULL ) + { + if ( (p = strchr(buffer, '\n')) != NULL ) + *p = '\0'; + else + fprintf(stderr, "%s: Warning: line too long\n", tblname); + + p = buffer; + +/* + * Syntax accepted: + * ... + * idem + * + * + * where ::= - + * and ::= U+ + * and ::= + */ + + while (*p == ' ' || *p == '\t') + p++; + if (!*p || *p == '#') + continue; /* skip comment or blank line */ + + fp0 = strtol(p, &p1, 0); + if (p1 == p) + { + fprintf(stderr, "Bad input line: %s\n", buffer); + exit(EX_DATAERR); + } + p = p1; + + while (*p == ' ' || *p == '\t') + p++; + if (*p == '-') + { + p++; + fp1 = strtol(p, &p1, 0); + if (p1 == p) + { + fprintf(stderr, "Bad input line: %s\n", buffer); + exit(EX_DATAERR); + } + p = p1; + } + else + fp1 = 0; + + if ( fp0 < 0 || fp0 >= fontlen ) + { + fprintf(stderr, + "%s: Glyph number (0x%x) larger than font length\n", + tblname, fp0); + exit(EX_DATAERR); + } + if ( fp1 && (fp1 < fp0 || fp1 >= fontlen) ) + { + fprintf(stderr, + "%s: Bad end of range (0x%x)\n", + tblname, fp1); + exit(EX_DATAERR); + } + + if (fp1) + { + /* we have a range; expect the word "idem" or a Unicode range of the + same length */ + while (*p == ' ' || *p == '\t') + p++; + if (!strncmp(p, "idem", 4)) + { + for (i=fp0; i<=fp1; i++) + addpair(i,i); + p += 4; + } + else + { + un0 = getunicode(&p); + while (*p == ' ' || *p == '\t') + p++; + if (*p != '-') + { + fprintf(stderr, +"%s: Corresponding to a range of font positions, there should be a Unicode range\n", + tblname); + exit(EX_DATAERR); + } + p++; + un1 = getunicode(&p); + if (un0 < 0 || un1 < 0) + { + fprintf(stderr, +"%s: Bad Unicode range corresponding to font position range 0x%x-0x%x\n", + tblname, fp0, fp1); + exit(EX_DATAERR); + } + if (un1 - un0 != fp1 - fp0) + { + fprintf(stderr, +"%s: Unicode range U+%x-U+%x not of the same length as font position range 0x%x-0x%x\n", + tblname, un0, un1, fp0, fp1); + exit(EX_DATAERR); + } + for(i=fp0; i<=fp1; i++) + addpair(i,un0-fp0+i); + } + } + else + { + /* no range; expect a list of unicode values for a single font position */ + + while ( (un0 = getunicode(&p)) >= 0 ) + addpair(fp0, un0); + } + while (*p == ' ' || *p == '\t') + p++; + if (*p && *p != '#') + fprintf(stderr, "%s: trailing junk (%s) ignored\n", tblname, p); + } + + /* Okay, we hit EOF, now output hash table */ + + fclose(ctbl); + + + /* Compute total size of Unicode list */ + nuni = 0; + for ( i = 0 ; i < fontlen ; i++ ) + nuni += unicount[i]; + + printf("\ +/*\n\ + * Do not edit this file; it was automatically generated by\n\ + *\n\ + * conmakehash %s > [this file]\n\ + *\n\ + */\n\ +\n\ +#include \n\ +\n\ +u8 dfont_unicount[%d] = \n\ +{\n\t", argv[1], fontlen); + + for ( i = 0 ; i < fontlen ; i++ ) + { + printf("%3d", unicount[i]); + if ( i == fontlen-1 ) + printf("\n};\n"); + else if ( i % 8 == 7 ) + printf(",\n\t"); + else + printf(", "); + } + + printf("\nu16 dfont_unitable[%d] = \n{\n\t", nuni); + + fp0 = 0; + nent = 0; + for ( i = 0 ; i < nuni ; i++ ) + { + while ( nent >= unicount[fp0] ) + { + fp0++; + nent = 0; + } + printf("0x%04x", unitable[fp0][nent++]); + if ( i == nuni-1 ) + printf("\n};\n"); + else if ( i % 8 == 7 ) + printf(",\n\t"); + else + printf(", "); + } + + exit(EX_OK); +} diff --git a/drivers/tty/vt/consolemap.c b/drivers/tty/vt/consolemap.c new file mode 100644 index 000000000..8ba0dc51a --- /dev/null +++ b/drivers/tty/vt/consolemap.c @@ -0,0 +1,857 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * consolemap.c + * + * Mapping from internal code (such as Latin-1 or Unicode or IBM PC code) + * to font positions. + * + * aeb, 950210 + * + * Support for multiple unimaps by Jakub Jelinek , July 1998 + * + * Fix bug in inverse translation. Stanislav Voronyi , Dec 1998 + * + * In order to prevent the following circular lock dependency: + * &mm->mmap_lock --> cpu_hotplug.lock --> console_lock --> &mm->mmap_lock + * + * We cannot allow page fault to happen while holding the console_lock. + * Therefore, all the userspace copy operations have to be done outside + * the console_lock critical sections. + * + * As all the affected functions are all called directly from vt_ioctl(), we + * can allocate some small buffers directly on stack without worrying about + * stack overflow. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static unsigned short translations[][256] = { + /* 8-bit Latin-1 mapped to Unicode -- trivial mapping */ + { + 0x0000, 0x0001, 0x0002, 0x0003, 0x0004, 0x0005, 0x0006, 0x0007, + 0x0008, 0x0009, 0x000a, 0x000b, 0x000c, 0x000d, 0x000e, 0x000f, + 0x0010, 0x0011, 0x0012, 0x0013, 0x0014, 0x0015, 0x0016, 0x0017, + 0x0018, 0x0019, 0x001a, 0x001b, 0x001c, 0x001d, 0x001e, 0x001f, + 0x0020, 0x0021, 0x0022, 0x0023, 0x0024, 0x0025, 0x0026, 0x0027, + 0x0028, 0x0029, 0x002a, 0x002b, 0x002c, 0x002d, 0x002e, 0x002f, + 0x0030, 0x0031, 0x0032, 0x0033, 0x0034, 0x0035, 0x0036, 0x0037, + 0x0038, 0x0039, 0x003a, 0x003b, 0x003c, 0x003d, 0x003e, 0x003f, + 0x0040, 0x0041, 0x0042, 0x0043, 0x0044, 0x0045, 0x0046, 0x0047, + 0x0048, 0x0049, 0x004a, 0x004b, 0x004c, 0x004d, 0x004e, 0x004f, + 0x0050, 0x0051, 0x0052, 0x0053, 0x0054, 0x0055, 0x0056, 0x0057, + 0x0058, 0x0059, 0x005a, 0x005b, 0x005c, 0x005d, 0x005e, 0x005f, + 0x0060, 0x0061, 0x0062, 0x0063, 0x0064, 0x0065, 0x0066, 0x0067, + 0x0068, 0x0069, 0x006a, 0x006b, 0x006c, 0x006d, 0x006e, 0x006f, + 0x0070, 0x0071, 0x0072, 0x0073, 0x0074, 0x0075, 0x0076, 0x0077, + 0x0078, 0x0079, 0x007a, 0x007b, 0x007c, 0x007d, 0x007e, 0x007f, + 0x0080, 0x0081, 0x0082, 0x0083, 0x0084, 0x0085, 0x0086, 0x0087, + 0x0088, 0x0089, 0x008a, 0x008b, 0x008c, 0x008d, 0x008e, 0x008f, + 0x0090, 0x0091, 0x0092, 0x0093, 0x0094, 0x0095, 0x0096, 0x0097, + 0x0098, 0x0099, 0x009a, 0x009b, 0x009c, 0x009d, 0x009e, 0x009f, + 0x00a0, 0x00a1, 0x00a2, 0x00a3, 0x00a4, 0x00a5, 0x00a6, 0x00a7, + 0x00a8, 0x00a9, 0x00aa, 0x00ab, 0x00ac, 0x00ad, 0x00ae, 0x00af, + 0x00b0, 0x00b1, 0x00b2, 0x00b3, 0x00b4, 0x00b5, 0x00b6, 0x00b7, + 0x00b8, 0x00b9, 0x00ba, 0x00bb, 0x00bc, 0x00bd, 0x00be, 0x00bf, + 0x00c0, 0x00c1, 0x00c2, 0x00c3, 0x00c4, 0x00c5, 0x00c6, 0x00c7, + 0x00c8, 0x00c9, 0x00ca, 0x00cb, 0x00cc, 0x00cd, 0x00ce, 0x00cf, + 0x00d0, 0x00d1, 0x00d2, 0x00d3, 0x00d4, 0x00d5, 0x00d6, 0x00d7, + 0x00d8, 0x00d9, 0x00da, 0x00db, 0x00dc, 0x00dd, 0x00de, 0x00df, + 0x00e0, 0x00e1, 0x00e2, 0x00e3, 0x00e4, 0x00e5, 0x00e6, 0x00e7, + 0x00e8, 0x00e9, 0x00ea, 0x00eb, 0x00ec, 0x00ed, 0x00ee, 0x00ef, + 0x00f0, 0x00f1, 0x00f2, 0x00f3, 0x00f4, 0x00f5, 0x00f6, 0x00f7, + 0x00f8, 0x00f9, 0x00fa, 0x00fb, 0x00fc, 0x00fd, 0x00fe, 0x00ff + }, + /* VT100 graphics mapped to Unicode */ + { + 0x0000, 0x0001, 0x0002, 0x0003, 0x0004, 0x0005, 0x0006, 0x0007, + 0x0008, 0x0009, 0x000a, 0x000b, 0x000c, 0x000d, 0x000e, 0x000f, + 0x0010, 0x0011, 0x0012, 0x0013, 0x0014, 0x0015, 0x0016, 0x0017, + 0x0018, 0x0019, 0x001a, 0x001b, 0x001c, 0x001d, 0x001e, 0x001f, + 0x0020, 0x0021, 0x0022, 0x0023, 0x0024, 0x0025, 0x0026, 0x0027, + 0x0028, 0x0029, 0x002a, 0x2192, 0x2190, 0x2191, 0x2193, 0x002f, + 0x2588, 0x0031, 0x0032, 0x0033, 0x0034, 0x0035, 0x0036, 0x0037, + 0x0038, 0x0039, 0x003a, 0x003b, 0x003c, 0x003d, 0x003e, 0x003f, + 0x0040, 0x0041, 0x0042, 0x0043, 0x0044, 0x0045, 0x0046, 0x0047, + 0x0048, 0x0049, 0x004a, 0x004b, 0x004c, 0x004d, 0x004e, 0x004f, + 0x0050, 0x0051, 0x0052, 0x0053, 0x0054, 0x0055, 0x0056, 0x0057, + 0x0058, 0x0059, 0x005a, 0x005b, 0x005c, 0x005d, 0x005e, 0x00a0, + 0x25c6, 0x2592, 0x2409, 0x240c, 0x240d, 0x240a, 0x00b0, 0x00b1, + 0x2591, 0x240b, 0x2518, 0x2510, 0x250c, 0x2514, 0x253c, 0x23ba, + 0x23bb, 0x2500, 0x23bc, 0x23bd, 0x251c, 0x2524, 0x2534, 0x252c, + 0x2502, 0x2264, 0x2265, 0x03c0, 0x2260, 0x00a3, 0x00b7, 0x007f, + 0x0080, 0x0081, 0x0082, 0x0083, 0x0084, 0x0085, 0x0086, 0x0087, + 0x0088, 0x0089, 0x008a, 0x008b, 0x008c, 0x008d, 0x008e, 0x008f, + 0x0090, 0x0091, 0x0092, 0x0093, 0x0094, 0x0095, 0x0096, 0x0097, + 0x0098, 0x0099, 0x009a, 0x009b, 0x009c, 0x009d, 0x009e, 0x009f, + 0x00a0, 0x00a1, 0x00a2, 0x00a3, 0x00a4, 0x00a5, 0x00a6, 0x00a7, + 0x00a8, 0x00a9, 0x00aa, 0x00ab, 0x00ac, 0x00ad, 0x00ae, 0x00af, + 0x00b0, 0x00b1, 0x00b2, 0x00b3, 0x00b4, 0x00b5, 0x00b6, 0x00b7, + 0x00b8, 0x00b9, 0x00ba, 0x00bb, 0x00bc, 0x00bd, 0x00be, 0x00bf, + 0x00c0, 0x00c1, 0x00c2, 0x00c3, 0x00c4, 0x00c5, 0x00c6, 0x00c7, + 0x00c8, 0x00c9, 0x00ca, 0x00cb, 0x00cc, 0x00cd, 0x00ce, 0x00cf, + 0x00d0, 0x00d1, 0x00d2, 0x00d3, 0x00d4, 0x00d5, 0x00d6, 0x00d7, + 0x00d8, 0x00d9, 0x00da, 0x00db, 0x00dc, 0x00dd, 0x00de, 0x00df, + 0x00e0, 0x00e1, 0x00e2, 0x00e3, 0x00e4, 0x00e5, 0x00e6, 0x00e7, + 0x00e8, 0x00e9, 0x00ea, 0x00eb, 0x00ec, 0x00ed, 0x00ee, 0x00ef, + 0x00f0, 0x00f1, 0x00f2, 0x00f3, 0x00f4, 0x00f5, 0x00f6, 0x00f7, + 0x00f8, 0x00f9, 0x00fa, 0x00fb, 0x00fc, 0x00fd, 0x00fe, 0x00ff + }, + /* IBM Codepage 437 mapped to Unicode */ + { + 0x0000, 0x263a, 0x263b, 0x2665, 0x2666, 0x2663, 0x2660, 0x2022, + 0x25d8, 0x25cb, 0x25d9, 0x2642, 0x2640, 0x266a, 0x266b, 0x263c, + 0x25b6, 0x25c0, 0x2195, 0x203c, 0x00b6, 0x00a7, 0x25ac, 0x21a8, + 0x2191, 0x2193, 0x2192, 0x2190, 0x221f, 0x2194, 0x25b2, 0x25bc, + 0x0020, 0x0021, 0x0022, 0x0023, 0x0024, 0x0025, 0x0026, 0x0027, + 0x0028, 0x0029, 0x002a, 0x002b, 0x002c, 0x002d, 0x002e, 0x002f, + 0x0030, 0x0031, 0x0032, 0x0033, 0x0034, 0x0035, 0x0036, 0x0037, + 0x0038, 0x0039, 0x003a, 0x003b, 0x003c, 0x003d, 0x003e, 0x003f, + 0x0040, 0x0041, 0x0042, 0x0043, 0x0044, 0x0045, 0x0046, 0x0047, + 0x0048, 0x0049, 0x004a, 0x004b, 0x004c, 0x004d, 0x004e, 0x004f, + 0x0050, 0x0051, 0x0052, 0x0053, 0x0054, 0x0055, 0x0056, 0x0057, + 0x0058, 0x0059, 0x005a, 0x005b, 0x005c, 0x005d, 0x005e, 0x005f, + 0x0060, 0x0061, 0x0062, 0x0063, 0x0064, 0x0065, 0x0066, 0x0067, + 0x0068, 0x0069, 0x006a, 0x006b, 0x006c, 0x006d, 0x006e, 0x006f, + 0x0070, 0x0071, 0x0072, 0x0073, 0x0074, 0x0075, 0x0076, 0x0077, + 0x0078, 0x0079, 0x007a, 0x007b, 0x007c, 0x007d, 0x007e, 0x2302, + 0x00c7, 0x00fc, 0x00e9, 0x00e2, 0x00e4, 0x00e0, 0x00e5, 0x00e7, + 0x00ea, 0x00eb, 0x00e8, 0x00ef, 0x00ee, 0x00ec, 0x00c4, 0x00c5, + 0x00c9, 0x00e6, 0x00c6, 0x00f4, 0x00f6, 0x00f2, 0x00fb, 0x00f9, + 0x00ff, 0x00d6, 0x00dc, 0x00a2, 0x00a3, 0x00a5, 0x20a7, 0x0192, + 0x00e1, 0x00ed, 0x00f3, 0x00fa, 0x00f1, 0x00d1, 0x00aa, 0x00ba, + 0x00bf, 0x2310, 0x00ac, 0x00bd, 0x00bc, 0x00a1, 0x00ab, 0x00bb, + 0x2591, 0x2592, 0x2593, 0x2502, 0x2524, 0x2561, 0x2562, 0x2556, + 0x2555, 0x2563, 0x2551, 0x2557, 0x255d, 0x255c, 0x255b, 0x2510, + 0x2514, 0x2534, 0x252c, 0x251c, 0x2500, 0x253c, 0x255e, 0x255f, + 0x255a, 0x2554, 0x2569, 0x2566, 0x2560, 0x2550, 0x256c, 0x2567, + 0x2568, 0x2564, 0x2565, 0x2559, 0x2558, 0x2552, 0x2553, 0x256b, + 0x256a, 0x2518, 0x250c, 0x2588, 0x2584, 0x258c, 0x2590, 0x2580, + 0x03b1, 0x00df, 0x0393, 0x03c0, 0x03a3, 0x03c3, 0x00b5, 0x03c4, + 0x03a6, 0x0398, 0x03a9, 0x03b4, 0x221e, 0x03c6, 0x03b5, 0x2229, + 0x2261, 0x00b1, 0x2265, 0x2264, 0x2320, 0x2321, 0x00f7, 0x2248, + 0x00b0, 0x2219, 0x00b7, 0x221a, 0x207f, 0x00b2, 0x25a0, 0x00a0 + }, + /* User mapping -- default to codes for direct font mapping */ + { + 0xf000, 0xf001, 0xf002, 0xf003, 0xf004, 0xf005, 0xf006, 0xf007, + 0xf008, 0xf009, 0xf00a, 0xf00b, 0xf00c, 0xf00d, 0xf00e, 0xf00f, + 0xf010, 0xf011, 0xf012, 0xf013, 0xf014, 0xf015, 0xf016, 0xf017, + 0xf018, 0xf019, 0xf01a, 0xf01b, 0xf01c, 0xf01d, 0xf01e, 0xf01f, + 0xf020, 0xf021, 0xf022, 0xf023, 0xf024, 0xf025, 0xf026, 0xf027, + 0xf028, 0xf029, 0xf02a, 0xf02b, 0xf02c, 0xf02d, 0xf02e, 0xf02f, + 0xf030, 0xf031, 0xf032, 0xf033, 0xf034, 0xf035, 0xf036, 0xf037, + 0xf038, 0xf039, 0xf03a, 0xf03b, 0xf03c, 0xf03d, 0xf03e, 0xf03f, + 0xf040, 0xf041, 0xf042, 0xf043, 0xf044, 0xf045, 0xf046, 0xf047, + 0xf048, 0xf049, 0xf04a, 0xf04b, 0xf04c, 0xf04d, 0xf04e, 0xf04f, + 0xf050, 0xf051, 0xf052, 0xf053, 0xf054, 0xf055, 0xf056, 0xf057, + 0xf058, 0xf059, 0xf05a, 0xf05b, 0xf05c, 0xf05d, 0xf05e, 0xf05f, + 0xf060, 0xf061, 0xf062, 0xf063, 0xf064, 0xf065, 0xf066, 0xf067, + 0xf068, 0xf069, 0xf06a, 0xf06b, 0xf06c, 0xf06d, 0xf06e, 0xf06f, + 0xf070, 0xf071, 0xf072, 0xf073, 0xf074, 0xf075, 0xf076, 0xf077, + 0xf078, 0xf079, 0xf07a, 0xf07b, 0xf07c, 0xf07d, 0xf07e, 0xf07f, + 0xf080, 0xf081, 0xf082, 0xf083, 0xf084, 0xf085, 0xf086, 0xf087, + 0xf088, 0xf089, 0xf08a, 0xf08b, 0xf08c, 0xf08d, 0xf08e, 0xf08f, + 0xf090, 0xf091, 0xf092, 0xf093, 0xf094, 0xf095, 0xf096, 0xf097, + 0xf098, 0xf099, 0xf09a, 0xf09b, 0xf09c, 0xf09d, 0xf09e, 0xf09f, + 0xf0a0, 0xf0a1, 0xf0a2, 0xf0a3, 0xf0a4, 0xf0a5, 0xf0a6, 0xf0a7, + 0xf0a8, 0xf0a9, 0xf0aa, 0xf0ab, 0xf0ac, 0xf0ad, 0xf0ae, 0xf0af, + 0xf0b0, 0xf0b1, 0xf0b2, 0xf0b3, 0xf0b4, 0xf0b5, 0xf0b6, 0xf0b7, + 0xf0b8, 0xf0b9, 0xf0ba, 0xf0bb, 0xf0bc, 0xf0bd, 0xf0be, 0xf0bf, + 0xf0c0, 0xf0c1, 0xf0c2, 0xf0c3, 0xf0c4, 0xf0c5, 0xf0c6, 0xf0c7, + 0xf0c8, 0xf0c9, 0xf0ca, 0xf0cb, 0xf0cc, 0xf0cd, 0xf0ce, 0xf0cf, + 0xf0d0, 0xf0d1, 0xf0d2, 0xf0d3, 0xf0d4, 0xf0d5, 0xf0d6, 0xf0d7, + 0xf0d8, 0xf0d9, 0xf0da, 0xf0db, 0xf0dc, 0xf0dd, 0xf0de, 0xf0df, + 0xf0e0, 0xf0e1, 0xf0e2, 0xf0e3, 0xf0e4, 0xf0e5, 0xf0e6, 0xf0e7, + 0xf0e8, 0xf0e9, 0xf0ea, 0xf0eb, 0xf0ec, 0xf0ed, 0xf0ee, 0xf0ef, + 0xf0f0, 0xf0f1, 0xf0f2, 0xf0f3, 0xf0f4, 0xf0f5, 0xf0f6, 0xf0f7, + 0xf0f8, 0xf0f9, 0xf0fa, 0xf0fb, 0xf0fc, 0xf0fd, 0xf0fe, 0xf0ff + } +}; + +/* The standard kernel character-to-font mappings are not invertible + -- this is just a best effort. */ + +#define MAX_GLYPH 512 /* Max possible glyph value */ + +static int inv_translate[MAX_NR_CONSOLES]; + +struct uni_pagedir { + u16 **uni_pgdir[32]; + unsigned long refcount; + unsigned long sum; + unsigned char *inverse_translations[4]; + u16 *inverse_trans_unicode; +}; + +static struct uni_pagedir *dflt; + +static void set_inverse_transl(struct vc_data *conp, struct uni_pagedir *p, int i) +{ + int j, glyph; + unsigned short *t = translations[i]; + unsigned char *q; + + if (!p) return; + q = p->inverse_translations[i]; + + if (!q) { + q = p->inverse_translations[i] = kmalloc(MAX_GLYPH, GFP_KERNEL); + if (!q) return; + } + memset(q, 0, MAX_GLYPH); + + for (j = 0; j < E_TABSZ; j++) { + glyph = conv_uni_to_pc(conp, t[j]); + if (glyph >= 0 && glyph < MAX_GLYPH && q[glyph] < 32) { + /* prefer '-' above SHY etc. */ + q[glyph] = j; + } + } +} + +static void set_inverse_trans_unicode(struct vc_data *conp, + struct uni_pagedir *p) +{ + int i, j, k, glyph; + u16 **p1, *p2; + u16 *q; + + if (!p) return; + q = p->inverse_trans_unicode; + if (!q) { + q = p->inverse_trans_unicode = + kmalloc_array(MAX_GLYPH, sizeof(u16), GFP_KERNEL); + if (!q) + return; + } + memset(q, 0, MAX_GLYPH * sizeof(u16)); + + for (i = 0; i < 32; i++) { + p1 = p->uni_pgdir[i]; + if (!p1) + continue; + for (j = 0; j < 32; j++) { + p2 = p1[j]; + if (!p2) + continue; + for (k = 0; k < 64; k++) { + glyph = p2[k]; + if (glyph >= 0 && glyph < MAX_GLYPH + && q[glyph] < 32) + q[glyph] = (i << 11) + (j << 6) + k; + } + } + } +} + +unsigned short *set_translate(int m, struct vc_data *vc) +{ + inv_translate[vc->vc_num] = m; + return translations[m]; +} + +/* + * Inverse translation is impossible for several reasons: + * 1. The font<->character maps are not 1-1. + * 2. The text may have been written while a different translation map + * was active. + * Still, it is now possible to a certain extent to cut and paste non-ASCII. + */ +u16 inverse_translate(const struct vc_data *conp, int glyph, int use_unicode) +{ + struct uni_pagedir *p; + int m; + if (glyph < 0 || glyph >= MAX_GLYPH) + return 0; + else { + p = *conp->vc_uni_pagedir_loc; + if (!p) + return glyph; + else if (use_unicode) { + if (!p->inverse_trans_unicode) + return glyph; + else + return p->inverse_trans_unicode[glyph]; + } else { + m = inv_translate[conp->vc_num]; + if (!p->inverse_translations[m]) + return glyph; + else + return p->inverse_translations[m][glyph]; + } + } +} +EXPORT_SYMBOL_GPL(inverse_translate); + +static void update_user_maps(void) +{ + int i; + struct uni_pagedir *p, *q = NULL; + + for (i = 0; i < MAX_NR_CONSOLES; i++) { + if (!vc_cons_allocated(i)) + continue; + p = *vc_cons[i].d->vc_uni_pagedir_loc; + if (p && p != q) { + set_inverse_transl(vc_cons[i].d, p, USER_MAP); + set_inverse_trans_unicode(vc_cons[i].d, p); + q = p; + } + } +} + +/* + * Load customizable translation table + * arg points to a 256 byte translation table. + * + * The "old" variants are for translation directly to font (using the + * 0xf000-0xf0ff "transparent" Unicodes) whereas the "new" variants set + * Unicodes explicitly. + */ +int con_set_trans_old(unsigned char __user * arg) +{ + int i; + unsigned short inbuf[E_TABSZ]; + unsigned char ubuf[E_TABSZ]; + + if (copy_from_user(ubuf, arg, E_TABSZ)) + return -EFAULT; + + for (i = 0; i < E_TABSZ ; i++) + inbuf[i] = UNI_DIRECT_BASE | ubuf[i]; + + console_lock(); + memcpy(translations[USER_MAP], inbuf, sizeof(inbuf)); + update_user_maps(); + console_unlock(); + return 0; +} + +int con_get_trans_old(unsigned char __user * arg) +{ + int i, ch; + unsigned short *p = translations[USER_MAP]; + unsigned char outbuf[E_TABSZ]; + + console_lock(); + for (i = 0; i < E_TABSZ ; i++) + { + ch = conv_uni_to_pc(vc_cons[fg_console].d, p[i]); + outbuf[i] = (ch & ~0xff) ? 0 : ch; + } + console_unlock(); + + return copy_to_user(arg, outbuf, sizeof(outbuf)) ? -EFAULT : 0; +} + +int con_set_trans_new(ushort __user * arg) +{ + unsigned short inbuf[E_TABSZ]; + + if (copy_from_user(inbuf, arg, sizeof(inbuf))) + return -EFAULT; + + console_lock(); + memcpy(translations[USER_MAP], inbuf, sizeof(inbuf)); + update_user_maps(); + console_unlock(); + return 0; +} + +int con_get_trans_new(ushort __user * arg) +{ + unsigned short outbuf[E_TABSZ]; + + console_lock(); + memcpy(outbuf, translations[USER_MAP], sizeof(outbuf)); + console_unlock(); + + return copy_to_user(arg, outbuf, sizeof(outbuf)) ? -EFAULT : 0; +} + +/* + * Unicode -> current font conversion + * + * A font has at most 512 chars, usually 256. + * But one font position may represent several Unicode chars. + * A hashtable is somewhat of a pain to deal with, so use a + * "paged table" instead. Simulation has shown the memory cost of + * this 3-level paged table scheme to be comparable to a hash table. + */ + +extern u8 dfont_unicount[]; /* Defined in console_defmap.c */ +extern u16 dfont_unitable[]; + +static void con_release_unimap(struct uni_pagedir *p) +{ + u16 **p1; + int i, j; + + if (p == dflt) dflt = NULL; + for (i = 0; i < 32; i++) { + p1 = p->uni_pgdir[i]; + if (p1 != NULL) { + for (j = 0; j < 32; j++) + kfree(p1[j]); + kfree(p1); + } + p->uni_pgdir[i] = NULL; + } + for (i = 0; i < 4; i++) { + kfree(p->inverse_translations[i]); + p->inverse_translations[i] = NULL; + } + kfree(p->inverse_trans_unicode); + p->inverse_trans_unicode = NULL; +} + +/* Caller must hold the console lock */ +void con_free_unimap(struct vc_data *vc) +{ + struct uni_pagedir *p; + + p = *vc->vc_uni_pagedir_loc; + if (!p) + return; + *vc->vc_uni_pagedir_loc = NULL; + if (--p->refcount) + return; + con_release_unimap(p); + kfree(p); +} + +static int con_unify_unimap(struct vc_data *conp, struct uni_pagedir *p) +{ + int i, j, k; + struct uni_pagedir *q; + + for (i = 0; i < MAX_NR_CONSOLES; i++) { + if (!vc_cons_allocated(i)) + continue; + q = *vc_cons[i].d->vc_uni_pagedir_loc; + if (!q || q == p || q->sum != p->sum) + continue; + for (j = 0; j < 32; j++) { + u16 **p1, **q1; + p1 = p->uni_pgdir[j]; q1 = q->uni_pgdir[j]; + if (!p1 && !q1) + continue; + if (!p1 || !q1) + break; + for (k = 0; k < 32; k++) { + if (!p1[k] && !q1[k]) + continue; + if (!p1[k] || !q1[k]) + break; + if (memcmp(p1[k], q1[k], 64*sizeof(u16))) + break; + } + if (k < 32) + break; + } + if (j == 32) { + q->refcount++; + *conp->vc_uni_pagedir_loc = q; + con_release_unimap(p); + kfree(p); + return 1; + } + } + return 0; +} + +static int +con_insert_unipair(struct uni_pagedir *p, u_short unicode, u_short fontpos) +{ + int i, n; + u16 **p1, *p2; + + p1 = p->uni_pgdir[n = unicode >> 11]; + if (!p1) { + p1 = p->uni_pgdir[n] = kmalloc_array(32, sizeof(u16 *), + GFP_KERNEL); + if (!p1) return -ENOMEM; + for (i = 0; i < 32; i++) + p1[i] = NULL; + } + + p2 = p1[n = (unicode >> 6) & 0x1f]; + if (!p2) { + p2 = p1[n] = kmalloc_array(64, sizeof(u16), GFP_KERNEL); + if (!p2) return -ENOMEM; + memset(p2, 0xff, 64*sizeof(u16)); /* No glyphs for the characters (yet) */ + } + + p2[unicode & 0x3f] = fontpos; + + p->sum += (fontpos << 20U) + unicode; + + return 0; +} + +/* Caller must hold the lock */ +static int con_do_clear_unimap(struct vc_data *vc) +{ + struct uni_pagedir *p, *q; + + p = *vc->vc_uni_pagedir_loc; + if (!p || --p->refcount) { + q = kzalloc(sizeof(*p), GFP_KERNEL); + if (!q) { + if (p) + p->refcount++; + return -ENOMEM; + } + q->refcount=1; + *vc->vc_uni_pagedir_loc = q; + } else { + if (p == dflt) dflt = NULL; + p->refcount++; + p->sum = 0; + con_release_unimap(p); + } + return 0; +} + +int con_clear_unimap(struct vc_data *vc) +{ + int ret; + console_lock(); + ret = con_do_clear_unimap(vc); + console_unlock(); + return ret; +} + +int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list) +{ + int err = 0, err1, i; + struct uni_pagedir *p, *q; + struct unipair *unilist, *plist; + + if (!ct) + return 0; + + unilist = vmemdup_user(list, array_size(sizeof(struct unipair), ct)); + if (IS_ERR(unilist)) + return PTR_ERR(unilist); + + console_lock(); + + /* Save original vc_unipagdir_loc in case we allocate a new one */ + p = *vc->vc_uni_pagedir_loc; + + if (!p) { + err = -EINVAL; + + goto out_unlock; + } + + if (p->refcount > 1) { + int j, k; + u16 **p1, *p2, l; + + err1 = con_do_clear_unimap(vc); + if (err1) { + err = err1; + goto out_unlock; + } + + /* + * Since refcount was > 1, con_clear_unimap() allocated a + * a new uni_pagedir for this vc. Re: p != q + */ + q = *vc->vc_uni_pagedir_loc; + + /* + * uni_pgdir is a 32*32*64 table with rows allocated + * when its first entry is added. The unicode value must + * still be incremented for empty rows. We are copying + * entries from "p" (old) to "q" (new). + */ + l = 0; /* unicode value */ + for (i = 0; i < 32; i++) { + p1 = p->uni_pgdir[i]; + if (p1) + for (j = 0; j < 32; j++) { + p2 = p1[j]; + if (p2) { + for (k = 0; k < 64; k++, l++) + if (p2[k] != 0xffff) { + /* + * Found one, copy entry for unicode + * l with fontpos value p2[k]. + */ + err1 = con_insert_unipair(q, l, p2[k]); + if (err1) { + p->refcount++; + *vc->vc_uni_pagedir_loc = p; + con_release_unimap(q); + kfree(q); + err = err1; + goto out_unlock; + } + } + } else { + /* Account for row of 64 empty entries */ + l += 64; + } + } + else + /* Account for empty table */ + l += 32 * 64; + } + + /* + * Finished copying font table, set vc_uni_pagedir to new table + */ + p = q; + } else if (p == dflt) { + dflt = NULL; + } + + /* + * Insert user specified unicode pairs into new table. + */ + for (plist = unilist; ct; ct--, plist++) { + err1 = con_insert_unipair(p, plist->unicode, plist->fontpos); + if (err1) + err = err1; + } + + /* + * Merge with fontmaps of any other virtual consoles. + */ + if (con_unify_unimap(vc, p)) + goto out_unlock; + + for (i = 0; i <= 3; i++) + set_inverse_transl(vc, p, i); /* Update inverse translations */ + set_inverse_trans_unicode(vc, p); + +out_unlock: + console_unlock(); + kvfree(unilist); + return err; +} + +/** + * con_set_default_unimap - set default unicode map + * @vc: the console we are updating + * + * Loads the unimap for the hardware font, as defined in uni_hash.tbl. + * The representation used was the most compact I could come up + * with. This routine is executed at video setup, and when the + * PIO_FONTRESET ioctl is called. + * + * The caller must hold the console lock + */ +int con_set_default_unimap(struct vc_data *vc) +{ + int i, j, err = 0, err1; + u16 *q; + struct uni_pagedir *p; + + if (dflt) { + p = *vc->vc_uni_pagedir_loc; + if (p == dflt) + return 0; + + dflt->refcount++; + *vc->vc_uni_pagedir_loc = dflt; + if (p && !--p->refcount) { + con_release_unimap(p); + kfree(p); + } + return 0; + } + + /* The default font is always 256 characters */ + + err = con_do_clear_unimap(vc); + if (err) + return err; + + p = *vc->vc_uni_pagedir_loc; + q = dfont_unitable; + + for (i = 0; i < 256; i++) + for (j = dfont_unicount[i]; j; j--) { + err1 = con_insert_unipair(p, *(q++), i); + if (err1) + err = err1; + } + + if (con_unify_unimap(vc, p)) { + dflt = *vc->vc_uni_pagedir_loc; + return err; + } + + for (i = 0; i <= 3; i++) + set_inverse_transl(vc, p, i); /* Update all inverse translations */ + set_inverse_trans_unicode(vc, p); + dflt = p; + return err; +} +EXPORT_SYMBOL(con_set_default_unimap); + +/** + * con_copy_unimap - copy unimap between two vts + * @dst_vc: target + * @src_vc: source + * + * The caller must hold the console lock when invoking this method + */ +int con_copy_unimap(struct vc_data *dst_vc, struct vc_data *src_vc) +{ + struct uni_pagedir *q; + + if (!*src_vc->vc_uni_pagedir_loc) + return -EINVAL; + if (*dst_vc->vc_uni_pagedir_loc == *src_vc->vc_uni_pagedir_loc) + return 0; + con_free_unimap(dst_vc); + q = *src_vc->vc_uni_pagedir_loc; + q->refcount++; + *dst_vc->vc_uni_pagedir_loc = q; + return 0; +} +EXPORT_SYMBOL(con_copy_unimap); + +/** + * con_get_unimap - get the unicode map + * @vc: the console to read from + * + * Read the console unicode data for this console. Called from the ioctl + * handlers. + */ +int con_get_unimap(struct vc_data *vc, ushort ct, ushort __user *uct, struct unipair __user *list) +{ + int i, j, k, ret = 0; + ushort ect; + u16 **p1, *p2; + struct uni_pagedir *p; + struct unipair *unilist; + + unilist = kvmalloc_array(ct, sizeof(struct unipair), GFP_KERNEL); + if (!unilist) + return -ENOMEM; + + console_lock(); + + ect = 0; + if (*vc->vc_uni_pagedir_loc) { + p = *vc->vc_uni_pagedir_loc; + for (i = 0; i < 32; i++) { + p1 = p->uni_pgdir[i]; + if (p1) + for (j = 0; j < 32; j++) { + p2 = *(p1++); + if (p2) + for (k = 0; k < 64; k++, p2++) { + if (*p2 >= MAX_GLYPH) + continue; + if (ect < ct) { + unilist[ect].unicode = + (i<<11)+(j<<6)+k; + unilist[ect].fontpos = *p2; + } + ect++; + } + } + } + } + console_unlock(); + if (copy_to_user(list, unilist, min(ect, ct) * sizeof(struct unipair))) + ret = -EFAULT; + put_user(ect, uct); + kvfree(unilist); + return ret ? ret : (ect <= ct) ? 0 : -ENOMEM; +} + +/* + * Always use USER_MAP. These functions are used by the keyboard, + * which shouldn't be affected by G0/G1 switching, etc. + * If the user map still contains default values, i.e. the + * direct-to-font mapping, then assume user is using Latin1. + * + * FIXME: at some point we need to decide if we want to lock the table + * update element itself via the keyboard_event_lock for consistency with the + * keyboard driver as well as the consoles + */ +/* may be called during an interrupt */ +u32 conv_8bit_to_uni(unsigned char c) +{ + unsigned short uni = translations[USER_MAP][c]; + return uni == (0xf000 | c) ? c : uni; +} + +int conv_uni_to_8bit(u32 uni) +{ + int c; + for (c = 0; c < 0x100; c++) + if (translations[USER_MAP][c] == uni || + (translations[USER_MAP][c] == (c | 0xf000) && uni == c)) + return c; + return -1; +} + +int +conv_uni_to_pc(struct vc_data *conp, long ucs) +{ + int h; + u16 **p1, *p2; + struct uni_pagedir *p; + + /* Only 16-bit codes supported at this time */ + if (ucs > 0xffff) + return -4; /* Not found */ + else if (ucs < 0x20) + return -1; /* Not a printable character */ + else if (ucs == 0xfeff || (ucs >= 0x200b && ucs <= 0x200f)) + return -2; /* Zero-width space */ + /* + * UNI_DIRECT_BASE indicates the start of the region in the User Zone + * which always has a 1:1 mapping to the currently loaded font. The + * UNI_DIRECT_MASK indicates the bit span of the region. + */ + else if ((ucs & ~UNI_DIRECT_MASK) == UNI_DIRECT_BASE) + return ucs & UNI_DIRECT_MASK; + + if (!*conp->vc_uni_pagedir_loc) + return -3; + + p = *conp->vc_uni_pagedir_loc; + if ((p1 = p->uni_pgdir[ucs >> 11]) && + (p2 = p1[(ucs >> 6) & 0x1f]) && + (h = p2[ucs & 0x3f]) < MAX_GLYPH) + return h; + + return -4; /* not found */ +} + +/* + * This is called at sys_setup time, after memory and the console are + * initialized. It must be possible to call kmalloc(..., GFP_KERNEL) + * from this function, hence the call from sys_setup. + */ +void __init +console_map_init(void) +{ + int i; + + for (i = 0; i < MAX_NR_CONSOLES; i++) + if (vc_cons_allocated(i) && !*vc_cons[i].d->vc_uni_pagedir_loc) + con_set_default_unimap(vc_cons[i].d); +} + diff --git a/drivers/tty/vt/cp437.uni b/drivers/tty/vt/cp437.uni new file mode 100644 index 000000000..a1991904c --- /dev/null +++ b/drivers/tty/vt/cp437.uni @@ -0,0 +1,292 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Unicode table for IBM Codepage 437. Note that there are many more +# substitutions that could be conceived (for example, thick-line +# graphs probably should be replaced with double-line ones, accented +# Latin characters should replaced with their nonaccented versions, +# and some upper case Greek characters could be replaced by Latin), however, +# I have limited myself to the Unicodes used by the kernel ISO 8859-1, +# DEC VT, and IBM CP 437 tables. +# +# -------------------------------- +# +# Basic IBM dingbats, some of which will never have a purpose clear +# to mankind +# +0x00 U+0000 +0x01 U+263a +0x02 U+263b +0x03 U+2665 +0x04 U+2666 U+25c6 +0x05 U+2663 +0x06 U+2660 +0x07 U+2022 +0x08 U+25d8 +0x09 U+25cb +0x0a U+25d9 +0x0b U+2642 +0x0c U+2640 +0x0d U+266a +0x0e U+266b +0x0f U+263c U+00a4 +0x10 U+25b6 U+25ba +0x11 U+25c0 U+25c4 +0x12 U+2195 +0x13 U+203c +0x14 U+00b6 +0x15 U+00a7 +0x16 U+25ac +0x17 U+21a8 +0x18 U+2191 +0x19 U+2193 +0x1a U+2192 +0x1b U+2190 +0x1c U+221f +0x1d U+2194 +0x1e U+25b2 +0x1f U+25bc +# +# The ASCII range is identity-mapped, but some of the characters also +# have to act as substitutes, especially the upper-case characters. +# +0x20 U+0020 +0x21 U+0021 +0x22 U+0022 U+00a8 +0x23 U+0023 +0x24 U+0024 +0x25 U+0025 +0x26 U+0026 +0x27 U+0027 U+00b4 +0x28 U+0028 +0x29 U+0029 +0x2a U+002a +0x2b U+002b +0x2c U+002c U+00b8 +0x2d U+002d U+00ad +0x2e U+002e +0x2f U+002f +0x30 U+0030 +0x31 U+0031 +0x32 U+0032 +0x33 U+0033 +0x34 U+0034 +0x35 U+0035 +0x36 U+0036 +0x37 U+0037 +0x38 U+0038 +0x39 U+0039 +0x3a U+003a +0x3b U+003b +0x3c U+003c +0x3d U+003d +0x3e U+003e +0x3f U+003f +0x40 U+0040 +0x41 U+0041 U+00c0 U+00c1 U+00c2 U+00c3 +0x42 U+0042 +0x43 U+0043 U+00a9 +0x44 U+0044 U+00d0 +0x45 U+0045 U+00c8 U+00ca U+00cb +0x46 U+0046 +0x47 U+0047 +0x48 U+0048 +0x49 U+0049 U+00cc U+00cd U+00ce U+00cf +0x4a U+004a +0x4b U+004b U+212a +0x4c U+004c +0x4d U+004d +0x4e U+004e +0x4f U+004f U+00d2 U+00d3 U+00d4 U+00d5 +0x50 U+0050 +0x51 U+0051 +0x52 U+0052 U+00ae +0x53 U+0053 +0x54 U+0054 +0x55 U+0055 U+00d9 U+00da U+00db +0x56 U+0056 +0x57 U+0057 +0x58 U+0058 +0x59 U+0059 U+00dd +0x5a U+005a +0x5b U+005b +0x5c U+005c +0x5d U+005d +0x5e U+005e +0x5f U+005f U+23bd U+f804 +0x60 U+0060 +0x61 U+0061 U+00e3 +0x62 U+0062 +0x63 U+0063 +0x64 U+0064 +0x65 U+0065 +0x66 U+0066 +0x67 U+0067 +0x68 U+0068 +0x69 U+0069 +0x6a U+006a +0x6b U+006b +0x6c U+006c +0x6d U+006d +0x6e U+006e +0x6f U+006f U+00f5 +0x70 U+0070 +0x71 U+0071 +0x72 U+0072 +0x73 U+0073 +0x74 U+0074 +0x75 U+0075 +0x76 U+0076 +0x77 U+0077 +0x78 U+0078 U+00d7 +0x79 U+0079 U+00fd +0x7a U+007a +0x7b U+007b +0x7c U+007c U+00a6 +0x7d U+007d +0x7e U+007e +# +# Okay, what on Earth is this one supposed to be used for? +# +0x7f U+2302 +# +# Non-English characters, mostly lower case letters... +# +0x80 U+00c7 +0x81 U+00fc +0x82 U+00e9 +0x83 U+00e2 +0x84 U+00e4 +0x85 U+00e0 +0x86 U+00e5 +0x87 U+00e7 +0x88 U+00ea +0x89 U+00eb +0x8a U+00e8 +0x8b U+00ef +0x8c U+00ee +0x8d U+00ec +0x8e U+00c4 +0x8f U+00c5 U+212b +0x90 U+00c9 +0x91 U+00e6 +0x92 U+00c6 +0x93 U+00f4 +0x94 U+00f6 +0x95 U+00f2 +0x96 U+00fb +0x97 U+00f9 +0x98 U+00ff +0x99 U+00d6 +0x9a U+00dc +0x9b U+00a2 +0x9c U+00a3 +0x9d U+00a5 +0x9e U+20a7 +0x9f U+0192 +0xa0 U+00e1 +0xa1 U+00ed +0xa2 U+00f3 +0xa3 U+00fa +0xa4 U+00f1 +0xa5 U+00d1 +0xa6 U+00aa +0xa7 U+00ba +0xa8 U+00bf +0xa9 U+2310 +0xaa U+00ac +0xab U+00bd +0xac U+00bc +0xad U+00a1 +0xae U+00ab +0xaf U+00bb +# +# Block graphics +# +0xb0 U+2591 +0xb1 U+2592 +0xb2 U+2593 +0xb3 U+2502 +0xb4 U+2524 +0xb5 U+2561 +0xb6 U+2562 +0xb7 U+2556 +0xb8 U+2555 +0xb9 U+2563 +0xba U+2551 +0xbb U+2557 +0xbc U+255d +0xbd U+255c +0xbe U+255b +0xbf U+2510 +0xc0 U+2514 +0xc1 U+2534 +0xc2 U+252c +0xc3 U+251c +0xc4 U+2500 +0xc5 U+253c +0xc6 U+255e +0xc7 U+255f +0xc8 U+255a +0xc9 U+2554 +0xca U+2569 +0xcb U+2566 +0xcc U+2560 +0xcd U+2550 +0xce U+256c +0xcf U+2567 +0xd0 U+2568 +0xd1 U+2564 +0xd2 U+2565 +0xd3 U+2559 +0xd4 U+2558 +0xd5 U+2552 +0xd6 U+2553 +0xd7 U+256b +0xd8 U+256a +0xd9 U+2518 +0xda U+250c +0xdb U+2588 +0xdc U+2584 +0xdd U+258c +0xde U+2590 +0xdf U+2580 +# +# Greek letters and mathematical symbols +# +0xe0 U+03b1 +0xe1 U+03b2 U+00df +0xe2 U+0393 +0xe3 U+03c0 +0xe4 U+03a3 +0xe5 U+03c3 +0xe6 U+00b5 U+03bc +0xe7 U+03c4 +0xe8 U+03a6 U+00d8 +0xe9 U+0398 +0xea U+03a9 U+2126 +0xeb U+03b4 U+00f0 +0xec U+221e +0xed U+03c6 U+00f8 +0xee U+03b5 U+2208 +0xef U+2229 +0xf0 U+2261 +0xf1 U+00b1 +0xf2 U+2265 +0xf3 U+2264 +0xf4 U+2320 +0xf5 U+2321 +0xf6 U+00f7 +0xf7 U+2248 +0xf8 U+00b0 +0xf9 U+2219 +0xfa U+00b7 +0xfb U+221a +0xfc U+207f +0xfd U+00b2 +# +# Square bullet, non-spacing blank +# Mapping U+fffd to the square bullet means it is the substitution +# character +# +0xfe U+25a0 U+fffd +0xff U+00a0 diff --git a/drivers/tty/vt/defkeymap.c_shipped b/drivers/tty/vt/defkeymap.c_shipped new file mode 100644 index 000000000..c7095fb7d --- /dev/null +++ b/drivers/tty/vt/defkeymap.c_shipped @@ -0,0 +1,263 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Do not edit this file! It was automatically generated by */ +/* loadkeys --mktable defkeymap.map > defkeymap.c */ + +#include +#include +#include + +u_short plain_map[NR_KEYS] = { + 0xf200, 0xf01b, 0xf031, 0xf032, 0xf033, 0xf034, 0xf035, 0xf036, + 0xf037, 0xf038, 0xf039, 0xf030, 0xf02d, 0xf03d, 0xf07f, 0xf009, + 0xfb71, 0xfb77, 0xfb65, 0xfb72, 0xfb74, 0xfb79, 0xfb75, 0xfb69, + 0xfb6f, 0xfb70, 0xf05b, 0xf05d, 0xf201, 0xf702, 0xfb61, 0xfb73, + 0xfb64, 0xfb66, 0xfb67, 0xfb68, 0xfb6a, 0xfb6b, 0xfb6c, 0xf03b, + 0xf027, 0xf060, 0xf700, 0xf05c, 0xfb7a, 0xfb78, 0xfb63, 0xfb76, + 0xfb62, 0xfb6e, 0xfb6d, 0xf02c, 0xf02e, 0xf02f, 0xf700, 0xf30c, + 0xf703, 0xf020, 0xf207, 0xf100, 0xf101, 0xf102, 0xf103, 0xf104, + 0xf105, 0xf106, 0xf107, 0xf108, 0xf109, 0xf208, 0xf209, 0xf307, + 0xf308, 0xf309, 0xf30b, 0xf304, 0xf305, 0xf306, 0xf30a, 0xf301, + 0xf302, 0xf303, 0xf300, 0xf310, 0xf206, 0xf200, 0xf03c, 0xf10a, + 0xf10b, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, + 0xf30e, 0xf702, 0xf30d, 0xf01c, 0xf701, 0xf205, 0xf114, 0xf603, + 0xf118, 0xf601, 0xf602, 0xf117, 0xf600, 0xf119, 0xf115, 0xf116, + 0xf11a, 0xf10c, 0xf10d, 0xf11b, 0xf11c, 0xf110, 0xf311, 0xf11d, + 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, +}; + +u_short shift_map[NR_KEYS] = { + 0xf200, 0xf01b, 0xf021, 0xf040, 0xf023, 0xf024, 0xf025, 0xf05e, + 0xf026, 0xf02a, 0xf028, 0xf029, 0xf05f, 0xf02b, 0xf07f, 0xf009, + 0xfb51, 0xfb57, 0xfb45, 0xfb52, 0xfb54, 0xfb59, 0xfb55, 0xfb49, + 0xfb4f, 0xfb50, 0xf07b, 0xf07d, 0xf201, 0xf702, 0xfb41, 0xfb53, + 0xfb44, 0xfb46, 0xfb47, 0xfb48, 0xfb4a, 0xfb4b, 0xfb4c, 0xf03a, + 0xf022, 0xf07e, 0xf700, 0xf07c, 0xfb5a, 0xfb58, 0xfb43, 0xfb56, + 0xfb42, 0xfb4e, 0xfb4d, 0xf03c, 0xf03e, 0xf03f, 0xf700, 0xf30c, + 0xf703, 0xf020, 0xf207, 0xf10a, 0xf10b, 0xf10c, 0xf10d, 0xf10e, + 0xf10f, 0xf110, 0xf111, 0xf112, 0xf113, 0xf213, 0xf203, 0xf307, + 0xf308, 0xf309, 0xf30b, 0xf304, 0xf305, 0xf306, 0xf30a, 0xf301, + 0xf302, 0xf303, 0xf300, 0xf310, 0xf206, 0xf200, 0xf03e, 0xf10a, + 0xf10b, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, + 0xf30e, 0xf702, 0xf30d, 0xf200, 0xf701, 0xf205, 0xf114, 0xf603, + 0xf20b, 0xf601, 0xf602, 0xf117, 0xf600, 0xf20a, 0xf115, 0xf116, + 0xf11a, 0xf10c, 0xf10d, 0xf11b, 0xf11c, 0xf110, 0xf311, 0xf11d, + 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, +}; + +u_short altgr_map[NR_KEYS] = { + 0xf200, 0xf200, 0xf200, 0xf040, 0xf200, 0xf024, 0xf200, 0xf200, + 0xf07b, 0xf05b, 0xf05d, 0xf07d, 0xf05c, 0xf200, 0xf200, 0xf200, + 0xfb71, 0xfb77, 0xf918, 0xfb72, 0xfb74, 0xfb79, 0xfb75, 0xfb69, + 0xfb6f, 0xfb70, 0xf200, 0xf07e, 0xf201, 0xf702, 0xf914, 0xfb73, + 0xf917, 0xf919, 0xfb67, 0xfb68, 0xfb6a, 0xfb6b, 0xfb6c, 0xf200, + 0xf200, 0xf200, 0xf700, 0xf200, 0xfb7a, 0xfb78, 0xf916, 0xfb76, + 0xf915, 0xfb6e, 0xfb6d, 0xf200, 0xf200, 0xf200, 0xf700, 0xf30c, + 0xf703, 0xf200, 0xf207, 0xf50c, 0xf50d, 0xf50e, 0xf50f, 0xf510, + 0xf511, 0xf512, 0xf513, 0xf514, 0xf515, 0xf208, 0xf202, 0xf911, + 0xf912, 0xf913, 0xf30b, 0xf90e, 0xf90f, 0xf910, 0xf30a, 0xf90b, + 0xf90c, 0xf90d, 0xf90a, 0xf310, 0xf206, 0xf200, 0xf07c, 0xf516, + 0xf517, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, + 0xf30e, 0xf702, 0xf30d, 0xf200, 0xf701, 0xf205, 0xf114, 0xf603, + 0xf118, 0xf601, 0xf602, 0xf117, 0xf600, 0xf119, 0xf115, 0xf116, + 0xf11a, 0xf10c, 0xf10d, 0xf11b, 0xf11c, 0xf110, 0xf311, 0xf11d, + 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, +}; + +u_short ctrl_map[NR_KEYS] = { + 0xf200, 0xf200, 0xf200, 0xf000, 0xf01b, 0xf01c, 0xf01d, 0xf01e, + 0xf01f, 0xf07f, 0xf200, 0xf200, 0xf01f, 0xf200, 0xf008, 0xf200, + 0xf011, 0xf017, 0xf005, 0xf012, 0xf014, 0xf019, 0xf015, 0xf009, + 0xf00f, 0xf010, 0xf01b, 0xf01d, 0xf201, 0xf702, 0xf001, 0xf013, + 0xf004, 0xf006, 0xf007, 0xf008, 0xf00a, 0xf00b, 0xf00c, 0xf200, + 0xf007, 0xf000, 0xf700, 0xf01c, 0xf01a, 0xf018, 0xf003, 0xf016, + 0xf002, 0xf00e, 0xf00d, 0xf200, 0xf20e, 0xf07f, 0xf700, 0xf30c, + 0xf703, 0xf000, 0xf207, 0xf100, 0xf101, 0xf102, 0xf103, 0xf104, + 0xf105, 0xf106, 0xf107, 0xf108, 0xf109, 0xf208, 0xf204, 0xf307, + 0xf308, 0xf309, 0xf30b, 0xf304, 0xf305, 0xf306, 0xf30a, 0xf301, + 0xf302, 0xf303, 0xf300, 0xf310, 0xf206, 0xf200, 0xf200, 0xf10a, + 0xf10b, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, + 0xf30e, 0xf702, 0xf30d, 0xf01c, 0xf701, 0xf205, 0xf114, 0xf603, + 0xf118, 0xf601, 0xf602, 0xf117, 0xf600, 0xf119, 0xf115, 0xf116, + 0xf11a, 0xf10c, 0xf10d, 0xf11b, 0xf11c, 0xf110, 0xf311, 0xf11d, + 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, +}; + +u_short shift_ctrl_map[NR_KEYS] = { + 0xf200, 0xf200, 0xf200, 0xf000, 0xf200, 0xf200, 0xf200, 0xf200, + 0xf200, 0xf200, 0xf200, 0xf200, 0xf01f, 0xf200, 0xf200, 0xf200, + 0xf011, 0xf017, 0xf005, 0xf012, 0xf014, 0xf019, 0xf015, 0xf009, + 0xf00f, 0xf010, 0xf200, 0xf200, 0xf201, 0xf702, 0xf001, 0xf013, + 0xf004, 0xf006, 0xf007, 0xf008, 0xf00a, 0xf00b, 0xf00c, 0xf200, + 0xf200, 0xf200, 0xf700, 0xf200, 0xf01a, 0xf018, 0xf003, 0xf016, + 0xf002, 0xf00e, 0xf00d, 0xf200, 0xf200, 0xf200, 0xf700, 0xf30c, + 0xf703, 0xf200, 0xf207, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, + 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf208, 0xf200, 0xf307, + 0xf308, 0xf309, 0xf30b, 0xf304, 0xf305, 0xf306, 0xf30a, 0xf301, + 0xf302, 0xf303, 0xf300, 0xf310, 0xf206, 0xf200, 0xf200, 0xf200, + 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, + 0xf30e, 0xf702, 0xf30d, 0xf200, 0xf701, 0xf205, 0xf114, 0xf603, + 0xf118, 0xf601, 0xf602, 0xf117, 0xf600, 0xf119, 0xf115, 0xf116, + 0xf11a, 0xf10c, 0xf10d, 0xf11b, 0xf11c, 0xf110, 0xf311, 0xf11d, + 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, +}; + +u_short alt_map[NR_KEYS] = { + 0xf200, 0xf81b, 0xf831, 0xf832, 0xf833, 0xf834, 0xf835, 0xf836, + 0xf837, 0xf838, 0xf839, 0xf830, 0xf82d, 0xf83d, 0xf87f, 0xf809, + 0xf871, 0xf877, 0xf865, 0xf872, 0xf874, 0xf879, 0xf875, 0xf869, + 0xf86f, 0xf870, 0xf85b, 0xf85d, 0xf80d, 0xf702, 0xf861, 0xf873, + 0xf864, 0xf866, 0xf867, 0xf868, 0xf86a, 0xf86b, 0xf86c, 0xf83b, + 0xf827, 0xf860, 0xf700, 0xf85c, 0xf87a, 0xf878, 0xf863, 0xf876, + 0xf862, 0xf86e, 0xf86d, 0xf82c, 0xf82e, 0xf82f, 0xf700, 0xf30c, + 0xf703, 0xf820, 0xf207, 0xf500, 0xf501, 0xf502, 0xf503, 0xf504, + 0xf505, 0xf506, 0xf507, 0xf508, 0xf509, 0xf208, 0xf209, 0xf907, + 0xf908, 0xf909, 0xf30b, 0xf904, 0xf905, 0xf906, 0xf30a, 0xf901, + 0xf902, 0xf903, 0xf900, 0xf310, 0xf206, 0xf200, 0xf83c, 0xf50a, + 0xf50b, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, + 0xf30e, 0xf702, 0xf30d, 0xf01c, 0xf701, 0xf205, 0xf114, 0xf603, + 0xf118, 0xf210, 0xf211, 0xf117, 0xf600, 0xf119, 0xf115, 0xf116, + 0xf11a, 0xf10c, 0xf10d, 0xf11b, 0xf11c, 0xf110, 0xf311, 0xf11d, + 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, +}; + +u_short ctrl_alt_map[NR_KEYS] = { + 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, + 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, + 0xf811, 0xf817, 0xf805, 0xf812, 0xf814, 0xf819, 0xf815, 0xf809, + 0xf80f, 0xf810, 0xf200, 0xf200, 0xf201, 0xf702, 0xf801, 0xf813, + 0xf804, 0xf806, 0xf807, 0xf808, 0xf80a, 0xf80b, 0xf80c, 0xf200, + 0xf200, 0xf200, 0xf700, 0xf200, 0xf81a, 0xf818, 0xf803, 0xf816, + 0xf802, 0xf80e, 0xf80d, 0xf200, 0xf200, 0xf200, 0xf700, 0xf30c, + 0xf703, 0xf200, 0xf207, 0xf500, 0xf501, 0xf502, 0xf503, 0xf504, + 0xf505, 0xf506, 0xf507, 0xf508, 0xf509, 0xf208, 0xf200, 0xf307, + 0xf308, 0xf309, 0xf30b, 0xf304, 0xf305, 0xf306, 0xf30a, 0xf301, + 0xf302, 0xf303, 0xf300, 0xf20c, 0xf206, 0xf200, 0xf200, 0xf50a, + 0xf50b, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, + 0xf30e, 0xf702, 0xf30d, 0xf200, 0xf701, 0xf205, 0xf114, 0xf603, + 0xf118, 0xf601, 0xf602, 0xf117, 0xf600, 0xf119, 0xf115, 0xf20c, + 0xf11a, 0xf10c, 0xf10d, 0xf11b, 0xf11c, 0xf110, 0xf311, 0xf11d, + 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, +}; + +ushort *key_maps[MAX_NR_KEYMAPS] = { + plain_map, shift_map, altgr_map, NULL, + ctrl_map, shift_ctrl_map, NULL, NULL, + alt_map, NULL, NULL, NULL, + ctrl_alt_map, NULL +}; + +unsigned int keymap_count = 7; + +/* + * Philosophy: most people do not define more strings, but they who do + * often want quite a lot of string space. So, we statically allocate + * the default and allocate dynamically in chunks of 512 bytes. + */ + +char func_buf[] = { + '\033', '[', '[', 'A', 0, + '\033', '[', '[', 'B', 0, + '\033', '[', '[', 'C', 0, + '\033', '[', '[', 'D', 0, + '\033', '[', '[', 'E', 0, + '\033', '[', '1', '7', '~', 0, + '\033', '[', '1', '8', '~', 0, + '\033', '[', '1', '9', '~', 0, + '\033', '[', '2', '0', '~', 0, + '\033', '[', '2', '1', '~', 0, + '\033', '[', '2', '3', '~', 0, + '\033', '[', '2', '4', '~', 0, + '\033', '[', '2', '5', '~', 0, + '\033', '[', '2', '6', '~', 0, + '\033', '[', '2', '8', '~', 0, + '\033', '[', '2', '9', '~', 0, + '\033', '[', '3', '1', '~', 0, + '\033', '[', '3', '2', '~', 0, + '\033', '[', '3', '3', '~', 0, + '\033', '[', '3', '4', '~', 0, + '\033', '[', '1', '~', 0, + '\033', '[', '2', '~', 0, + '\033', '[', '3', '~', 0, + '\033', '[', '4', '~', 0, + '\033', '[', '5', '~', 0, + '\033', '[', '6', '~', 0, + '\033', '[', 'M', 0, + '\033', '[', 'P', 0, +}; + +char *funcbufptr = func_buf; +int funcbufsize = sizeof(func_buf); +int funcbufleft = 0; /* space left */ + +char *func_table[MAX_NR_FUNC] = { + func_buf + 0, + func_buf + 5, + func_buf + 10, + func_buf + 15, + func_buf + 20, + func_buf + 25, + func_buf + 31, + func_buf + 37, + func_buf + 43, + func_buf + 49, + func_buf + 55, + func_buf + 61, + func_buf + 67, + func_buf + 73, + func_buf + 79, + func_buf + 85, + func_buf + 91, + func_buf + 97, + func_buf + 103, + func_buf + 109, + func_buf + 115, + func_buf + 120, + func_buf + 125, + func_buf + 130, + func_buf + 135, + func_buf + 140, + func_buf + 145, + NULL, + NULL, + func_buf + 149, + NULL, +}; + +struct kbdiacruc accent_table[MAX_DIACR] = { + {'`', 'A', 0300}, {'`', 'a', 0340}, + {'\'', 'A', 0301}, {'\'', 'a', 0341}, + {'^', 'A', 0302}, {'^', 'a', 0342}, + {'~', 'A', 0303}, {'~', 'a', 0343}, + {'"', 'A', 0304}, {'"', 'a', 0344}, + {'O', 'A', 0305}, {'o', 'a', 0345}, + {'0', 'A', 0305}, {'0', 'a', 0345}, + {'A', 'A', 0305}, {'a', 'a', 0345}, + {'A', 'E', 0306}, {'a', 'e', 0346}, + {',', 'C', 0307}, {',', 'c', 0347}, + {'`', 'E', 0310}, {'`', 'e', 0350}, + {'\'', 'E', 0311}, {'\'', 'e', 0351}, + {'^', 'E', 0312}, {'^', 'e', 0352}, + {'"', 'E', 0313}, {'"', 'e', 0353}, + {'`', 'I', 0314}, {'`', 'i', 0354}, + {'\'', 'I', 0315}, {'\'', 'i', 0355}, + {'^', 'I', 0316}, {'^', 'i', 0356}, + {'"', 'I', 0317}, {'"', 'i', 0357}, + {'-', 'D', 0320}, {'-', 'd', 0360}, + {'~', 'N', 0321}, {'~', 'n', 0361}, + {'`', 'O', 0322}, {'`', 'o', 0362}, + {'\'', 'O', 0323}, {'\'', 'o', 0363}, + {'^', 'O', 0324}, {'^', 'o', 0364}, + {'~', 'O', 0325}, {'~', 'o', 0365}, + {'"', 'O', 0326}, {'"', 'o', 0366}, + {'/', 'O', 0330}, {'/', 'o', 0370}, + {'`', 'U', 0331}, {'`', 'u', 0371}, + {'\'', 'U', 0332}, {'\'', 'u', 0372}, + {'^', 'U', 0333}, {'^', 'u', 0373}, + {'"', 'U', 0334}, {'"', 'u', 0374}, + {'\'', 'Y', 0335}, {'\'', 'y', 0375}, + {'T', 'H', 0336}, {'t', 'h', 0376}, + {'s', 's', 0337}, {'"', 'y', 0377}, + {'s', 'z', 0337}, {'i', 'j', 0377}, +}; + +unsigned int accent_table_size = 68; diff --git a/drivers/tty/vt/defkeymap.map b/drivers/tty/vt/defkeymap.map new file mode 100644 index 000000000..37f1ac6dd --- /dev/null +++ b/drivers/tty/vt/defkeymap.map @@ -0,0 +1,358 @@ +# SPDX-License-Identifier: GPL-2.0 +# Default kernel keymap. This uses 7 modifier combinations. +keymaps 0-2,4-5,8,12 +# Change the above line into +# keymaps 0-2,4-6,8,12 +# in case you want the entries +# altgr control keycode 83 = Boot +# altgr control keycode 111 = Boot +# below. +# +# In fact AltGr is used very little, and one more keymap can +# be saved by mapping AltGr to Alt (and adapting a few entries): +# keycode 100 = Alt +# +keycode 1 = Escape Escape + alt keycode 1 = Meta_Escape +keycode 2 = one exclam + alt keycode 2 = Meta_one +keycode 3 = two at at + control keycode 3 = nul + shift control keycode 3 = nul + alt keycode 3 = Meta_two +keycode 4 = three numbersign + control keycode 4 = Escape + alt keycode 4 = Meta_three +keycode 5 = four dollar dollar + control keycode 5 = Control_backslash + alt keycode 5 = Meta_four +keycode 6 = five percent + control keycode 6 = Control_bracketright + alt keycode 6 = Meta_five +keycode 7 = six asciicircum + control keycode 7 = Control_asciicircum + alt keycode 7 = Meta_six +keycode 8 = seven ampersand braceleft + control keycode 8 = Control_underscore + alt keycode 8 = Meta_seven +keycode 9 = eight asterisk bracketleft + control keycode 9 = Delete + alt keycode 9 = Meta_eight +keycode 10 = nine parenleft bracketright + alt keycode 10 = Meta_nine +keycode 11 = zero parenright braceright + alt keycode 11 = Meta_zero +keycode 12 = minus underscore backslash + control keycode 12 = Control_underscore + shift control keycode 12 = Control_underscore + alt keycode 12 = Meta_minus +keycode 13 = equal plus + alt keycode 13 = Meta_equal +keycode 14 = Delete Delete + control keycode 14 = BackSpace + alt keycode 14 = Meta_Delete +keycode 15 = Tab Tab + alt keycode 15 = Meta_Tab +keycode 16 = q +keycode 17 = w +keycode 18 = e + altgr keycode 18 = Hex_E +keycode 19 = r +keycode 20 = t +keycode 21 = y +keycode 22 = u +keycode 23 = i +keycode 24 = o +keycode 25 = p +keycode 26 = bracketleft braceleft + control keycode 26 = Escape + alt keycode 26 = Meta_bracketleft +keycode 27 = bracketright braceright asciitilde + control keycode 27 = Control_bracketright + alt keycode 27 = Meta_bracketright +keycode 28 = Return + alt keycode 28 = Meta_Control_m +keycode 29 = Control +keycode 30 = a + altgr keycode 30 = Hex_A +keycode 31 = s +keycode 32 = d + altgr keycode 32 = Hex_D +keycode 33 = f + altgr keycode 33 = Hex_F +keycode 34 = g +keycode 35 = h +keycode 36 = j +keycode 37 = k +keycode 38 = l +keycode 39 = semicolon colon + alt keycode 39 = Meta_semicolon +keycode 40 = apostrophe quotedbl + control keycode 40 = Control_g + alt keycode 40 = Meta_apostrophe +keycode 41 = grave asciitilde + control keycode 41 = nul + alt keycode 41 = Meta_grave +keycode 42 = Shift +keycode 43 = backslash bar + control keycode 43 = Control_backslash + alt keycode 43 = Meta_backslash +keycode 44 = z +keycode 45 = x +keycode 46 = c + altgr keycode 46 = Hex_C +keycode 47 = v +keycode 48 = b + altgr keycode 48 = Hex_B +keycode 49 = n +keycode 50 = m +keycode 51 = comma less + alt keycode 51 = Meta_comma +keycode 52 = period greater + control keycode 52 = Compose + alt keycode 52 = Meta_period +keycode 53 = slash question + control keycode 53 = Delete + alt keycode 53 = Meta_slash +keycode 54 = Shift +keycode 55 = KP_Multiply +keycode 56 = Alt +keycode 57 = space space + control keycode 57 = nul + alt keycode 57 = Meta_space +keycode 58 = Caps_Lock +keycode 59 = F1 F11 Console_13 + control keycode 59 = F1 + alt keycode 59 = Console_1 + control alt keycode 59 = Console_1 +keycode 60 = F2 F12 Console_14 + control keycode 60 = F2 + alt keycode 60 = Console_2 + control alt keycode 60 = Console_2 +keycode 61 = F3 F13 Console_15 + control keycode 61 = F3 + alt keycode 61 = Console_3 + control alt keycode 61 = Console_3 +keycode 62 = F4 F14 Console_16 + control keycode 62 = F4 + alt keycode 62 = Console_4 + control alt keycode 62 = Console_4 +keycode 63 = F5 F15 Console_17 + control keycode 63 = F5 + alt keycode 63 = Console_5 + control alt keycode 63 = Console_5 +keycode 64 = F6 F16 Console_18 + control keycode 64 = F6 + alt keycode 64 = Console_6 + control alt keycode 64 = Console_6 +keycode 65 = F7 F17 Console_19 + control keycode 65 = F7 + alt keycode 65 = Console_7 + control alt keycode 65 = Console_7 +keycode 66 = F8 F18 Console_20 + control keycode 66 = F8 + alt keycode 66 = Console_8 + control alt keycode 66 = Console_8 +keycode 67 = F9 F19 Console_21 + control keycode 67 = F9 + alt keycode 67 = Console_9 + control alt keycode 67 = Console_9 +keycode 68 = F10 F20 Console_22 + control keycode 68 = F10 + alt keycode 68 = Console_10 + control alt keycode 68 = Console_10 +keycode 69 = Num_Lock + shift keycode 69 = Bare_Num_Lock +keycode 70 = Scroll_Lock Show_Memory Show_Registers + control keycode 70 = Show_State + alt keycode 70 = Scroll_Lock +keycode 71 = KP_7 + alt keycode 71 = Ascii_7 + altgr keycode 71 = Hex_7 +keycode 72 = KP_8 + alt keycode 72 = Ascii_8 + altgr keycode 72 = Hex_8 +keycode 73 = KP_9 + alt keycode 73 = Ascii_9 + altgr keycode 73 = Hex_9 +keycode 74 = KP_Subtract +keycode 75 = KP_4 + alt keycode 75 = Ascii_4 + altgr keycode 75 = Hex_4 +keycode 76 = KP_5 + alt keycode 76 = Ascii_5 + altgr keycode 76 = Hex_5 +keycode 77 = KP_6 + alt keycode 77 = Ascii_6 + altgr keycode 77 = Hex_6 +keycode 78 = KP_Add +keycode 79 = KP_1 + alt keycode 79 = Ascii_1 + altgr keycode 79 = Hex_1 +keycode 80 = KP_2 + alt keycode 80 = Ascii_2 + altgr keycode 80 = Hex_2 +keycode 81 = KP_3 + alt keycode 81 = Ascii_3 + altgr keycode 81 = Hex_3 +keycode 82 = KP_0 + alt keycode 82 = Ascii_0 + altgr keycode 82 = Hex_0 +keycode 83 = KP_Period +# altgr control keycode 83 = Boot + control alt keycode 83 = Boot +keycode 84 = Last_Console +keycode 85 = +keycode 86 = less greater bar + alt keycode 86 = Meta_less +keycode 87 = F11 F11 Console_23 + control keycode 87 = F11 + alt keycode 87 = Console_11 + control alt keycode 87 = Console_11 +keycode 88 = F12 F12 Console_24 + control keycode 88 = F12 + alt keycode 88 = Console_12 + control alt keycode 88 = Console_12 +keycode 89 = +keycode 90 = +keycode 91 = +keycode 92 = +keycode 93 = +keycode 94 = +keycode 95 = +keycode 96 = KP_Enter +keycode 97 = Control +keycode 98 = KP_Divide +keycode 99 = Control_backslash + control keycode 99 = Control_backslash + alt keycode 99 = Control_backslash +keycode 100 = AltGr +keycode 101 = Break +keycode 102 = Find +keycode 103 = Up +keycode 104 = Prior + shift keycode 104 = Scroll_Backward +keycode 105 = Left + alt keycode 105 = Decr_Console +keycode 106 = Right + alt keycode 106 = Incr_Console +keycode 107 = Select +keycode 108 = Down +keycode 109 = Next + shift keycode 109 = Scroll_Forward +keycode 110 = Insert +keycode 111 = Remove +# altgr control keycode 111 = Boot + control alt keycode 111 = Boot +keycode 112 = Macro +keycode 113 = F13 +keycode 114 = F14 +keycode 115 = Help +keycode 116 = Do +keycode 117 = F17 +keycode 118 = KP_MinPlus +keycode 119 = Pause +keycode 120 = +keycode 121 = +keycode 122 = +keycode 123 = +keycode 124 = +keycode 125 = +keycode 126 = +keycode 127 = +string F1 = "\033[[A" +string F2 = "\033[[B" +string F3 = "\033[[C" +string F4 = "\033[[D" +string F5 = "\033[[E" +string F6 = "\033[17~" +string F7 = "\033[18~" +string F8 = "\033[19~" +string F9 = "\033[20~" +string F10 = "\033[21~" +string F11 = "\033[23~" +string F12 = "\033[24~" +string F13 = "\033[25~" +string F14 = "\033[26~" +string F15 = "\033[28~" +string F16 = "\033[29~" +string F17 = "\033[31~" +string F18 = "\033[32~" +string F19 = "\033[33~" +string F20 = "\033[34~" +string Find = "\033[1~" +string Insert = "\033[2~" +string Remove = "\033[3~" +string Select = "\033[4~" +string Prior = "\033[5~" +string Next = "\033[6~" +string Macro = "\033[M" +string Pause = "\033[P" +compose '`' 'A' to 'À' +compose '`' 'a' to 'à' +compose '\'' 'A' to 'Á' +compose '\'' 'a' to 'á' +compose '^' 'A' to 'Â' +compose '^' 'a' to 'â' +compose '~' 'A' to 'Ã' +compose '~' 'a' to 'ã' +compose '"' 'A' to 'Ä' +compose '"' 'a' to 'ä' +compose 'O' 'A' to 'Å' +compose 'o' 'a' to 'å' +compose '0' 'A' to 'Å' +compose '0' 'a' to 'å' +compose 'A' 'A' to 'Å' +compose 'a' 'a' to 'å' +compose 'A' 'E' to 'Æ' +compose 'a' 'e' to 'æ' +compose ',' 'C' to 'Ç' +compose ',' 'c' to 'ç' +compose '`' 'E' to 'È' +compose '`' 'e' to 'è' +compose '\'' 'E' to 'É' +compose '\'' 'e' to 'é' +compose '^' 'E' to 'Ê' +compose '^' 'e' to 'ê' +compose '"' 'E' to 'Ë' +compose '"' 'e' to 'ë' +compose '`' 'I' to 'Ì' +compose '`' 'i' to 'ì' +compose '\'' 'I' to 'Í' +compose '\'' 'i' to 'í' +compose '^' 'I' to 'Î' +compose '^' 'i' to 'î' +compose '"' 'I' to 'Ï' +compose '"' 'i' to 'ï' +compose '-' 'D' to 'Ð' +compose '-' 'd' to 'ð' +compose '~' 'N' to 'Ñ' +compose '~' 'n' to 'ñ' +compose '`' 'O' to 'Ò' +compose '`' 'o' to 'ò' +compose '\'' 'O' to 'Ó' +compose '\'' 'o' to 'ó' +compose '^' 'O' to 'Ô' +compose '^' 'o' to 'ô' +compose '~' 'O' to 'Õ' +compose '~' 'o' to 'õ' +compose '"' 'O' to 'Ö' +compose '"' 'o' to 'ö' +compose '/' 'O' to 'Ø' +compose '/' 'o' to 'ø' +compose '`' 'U' to 'Ù' +compose '`' 'u' to 'ù' +compose '\'' 'U' to 'Ú' +compose '\'' 'u' to 'ú' +compose '^' 'U' to 'Û' +compose '^' 'u' to 'û' +compose '"' 'U' to 'Ü' +compose '"' 'u' to 'ü' +compose '\'' 'Y' to 'Ý' +compose '\'' 'y' to 'ý' +compose 'T' 'H' to 'Þ' +compose 't' 'h' to 'þ' +compose 's' 's' to 'ß' +compose '"' 'y' to 'ÿ' +compose 's' 'z' to 'ß' +compose 'i' 'j' to 'ÿ' diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c new file mode 100644 index 000000000..aa0026a98 --- /dev/null +++ b/drivers/tty/vt/keyboard.c @@ -0,0 +1,2305 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Written for linux by Johan Myreen as a translation from + * the assembly version by Linus (with diacriticals added) + * + * Some additional features added by Christoph Niemann (ChN), March 1993 + * + * Loadable keymaps by Risto Kankkunen, May 1993 + * + * Diacriticals redone & other small changes, aeb@cwi.nl, June 1993 + * Added decr/incr_console, dynamic keymaps, Unicode support, + * dynamic function/string keys, led setting, Sept 1994 + * `Sticky' modifier keys, 951006. + * + * 11-11-96: SAK should now work in the raw mode (Martin Mares) + * + * Modified to provide 'generic' keyboard support by Hamish Macdonald + * Merge with the m68k keyboard driver and split-off of the PC low-level + * parts by Geert Uytterhoeven, May 1997 + * + * 27-05-97: Added support for the Magic SysRq Key (Martin Mares) + * 30-07-98: Dead keys redone, aeb@cwi.nl. + * 21-08-02: Converted to input API, major cleanup. (Vojtech Pavlik) + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +extern void ctrl_alt_del(void); + +/* + * Exported functions/variables + */ + +#define KBD_DEFMODE ((1 << VC_REPEAT) | (1 << VC_META)) + +#if defined(CONFIG_X86) || defined(CONFIG_PARISC) +#include +#else +static inline int kbd_defleds(void) +{ + return 0; +} +#endif + +#define KBD_DEFLOCK 0 + +/* + * Handler Tables. + */ + +#define K_HANDLERS\ + k_self, k_fn, k_spec, k_pad,\ + k_dead, k_cons, k_cur, k_shift,\ + k_meta, k_ascii, k_lock, k_lowercase,\ + k_slock, k_dead2, k_brl, k_ignore + +typedef void (k_handler_fn)(struct vc_data *vc, unsigned char value, + char up_flag); +static k_handler_fn K_HANDLERS; +static k_handler_fn *k_handler[16] = { K_HANDLERS }; + +#define FN_HANDLERS\ + fn_null, fn_enter, fn_show_ptregs, fn_show_mem,\ + fn_show_state, fn_send_intr, fn_lastcons, fn_caps_toggle,\ + fn_num, fn_hold, fn_scroll_forw, fn_scroll_back,\ + fn_boot_it, fn_caps_on, fn_compose, fn_SAK,\ + fn_dec_console, fn_inc_console, fn_spawn_con, fn_bare_num + +typedef void (fn_handler_fn)(struct vc_data *vc); +static fn_handler_fn FN_HANDLERS; +static fn_handler_fn *fn_handler[] = { FN_HANDLERS }; + +/* + * Variables exported for vt_ioctl.c + */ + +struct vt_spawn_console vt_spawn_con = { + .lock = __SPIN_LOCK_UNLOCKED(vt_spawn_con.lock), + .pid = NULL, + .sig = 0, +}; + + +/* + * Internal Data. + */ + +static struct kbd_struct kbd_table[MAX_NR_CONSOLES]; +static struct kbd_struct *kbd = kbd_table; + +/* maximum values each key_handler can handle */ +static const int max_vals[] = { + 255, ARRAY_SIZE(func_table) - 1, ARRAY_SIZE(fn_handler) - 1, NR_PAD - 1, + NR_DEAD - 1, 255, 3, NR_SHIFT - 1, 255, NR_ASCII - 1, NR_LOCK - 1, + 255, NR_LOCK - 1, 255, NR_BRL - 1 +}; + +static const int NR_TYPES = ARRAY_SIZE(max_vals); + +static struct input_handler kbd_handler; +static DEFINE_SPINLOCK(kbd_event_lock); +static DEFINE_SPINLOCK(led_lock); +static DEFINE_SPINLOCK(func_buf_lock); /* guard 'func_buf' and friends */ +static unsigned long key_down[BITS_TO_LONGS(KEY_CNT)]; /* keyboard key bitmap */ +static unsigned char shift_down[NR_SHIFT]; /* shift state counters.. */ +static bool dead_key_next; + +/* Handles a number being assembled on the number pad */ +static bool npadch_active; +static unsigned int npadch_value; + +static unsigned int diacr; +static char rep; /* flag telling character repeat */ + +static int shift_state = 0; + +static unsigned int ledstate = -1U; /* undefined */ +static unsigned char ledioctl; + +/* + * Notifier list for console keyboard events + */ +static ATOMIC_NOTIFIER_HEAD(keyboard_notifier_list); + +int register_keyboard_notifier(struct notifier_block *nb) +{ + return atomic_notifier_chain_register(&keyboard_notifier_list, nb); +} +EXPORT_SYMBOL_GPL(register_keyboard_notifier); + +int unregister_keyboard_notifier(struct notifier_block *nb) +{ + return atomic_notifier_chain_unregister(&keyboard_notifier_list, nb); +} +EXPORT_SYMBOL_GPL(unregister_keyboard_notifier); + +/* + * Translation of scancodes to keycodes. We set them on only the first + * keyboard in the list that accepts the scancode and keycode. + * Explanation for not choosing the first attached keyboard anymore: + * USB keyboards for example have two event devices: one for all "normal" + * keys and one for extra function keys (like "volume up", "make coffee", + * etc.). So this means that scancodes for the extra function keys won't + * be valid for the first event device, but will be for the second. + */ + +struct getset_keycode_data { + struct input_keymap_entry ke; + int error; +}; + +static int getkeycode_helper(struct input_handle *handle, void *data) +{ + struct getset_keycode_data *d = data; + + d->error = input_get_keycode(handle->dev, &d->ke); + + return d->error == 0; /* stop as soon as we successfully get one */ +} + +static int getkeycode(unsigned int scancode) +{ + struct getset_keycode_data d = { + .ke = { + .flags = 0, + .len = sizeof(scancode), + .keycode = 0, + }, + .error = -ENODEV, + }; + + memcpy(d.ke.scancode, &scancode, sizeof(scancode)); + + input_handler_for_each_handle(&kbd_handler, &d, getkeycode_helper); + + return d.error ?: d.ke.keycode; +} + +static int setkeycode_helper(struct input_handle *handle, void *data) +{ + struct getset_keycode_data *d = data; + + d->error = input_set_keycode(handle->dev, &d->ke); + + return d->error == 0; /* stop as soon as we successfully set one */ +} + +static int setkeycode(unsigned int scancode, unsigned int keycode) +{ + struct getset_keycode_data d = { + .ke = { + .flags = 0, + .len = sizeof(scancode), + .keycode = keycode, + }, + .error = -ENODEV, + }; + + memcpy(d.ke.scancode, &scancode, sizeof(scancode)); + + input_handler_for_each_handle(&kbd_handler, &d, setkeycode_helper); + + return d.error; +} + +/* + * Making beeps and bells. Note that we prefer beeps to bells, but when + * shutting the sound off we do both. + */ + +static int kd_sound_helper(struct input_handle *handle, void *data) +{ + unsigned int *hz = data; + struct input_dev *dev = handle->dev; + + if (test_bit(EV_SND, dev->evbit)) { + if (test_bit(SND_TONE, dev->sndbit)) { + input_inject_event(handle, EV_SND, SND_TONE, *hz); + if (*hz) + return 0; + } + if (test_bit(SND_BELL, dev->sndbit)) + input_inject_event(handle, EV_SND, SND_BELL, *hz ? 1 : 0); + } + + return 0; +} + +static void kd_nosound(struct timer_list *unused) +{ + static unsigned int zero; + + input_handler_for_each_handle(&kbd_handler, &zero, kd_sound_helper); +} + +static DEFINE_TIMER(kd_mksound_timer, kd_nosound); + +void kd_mksound(unsigned int hz, unsigned int ticks) +{ + del_timer_sync(&kd_mksound_timer); + + input_handler_for_each_handle(&kbd_handler, &hz, kd_sound_helper); + + if (hz && ticks) + mod_timer(&kd_mksound_timer, jiffies + ticks); +} +EXPORT_SYMBOL(kd_mksound); + +/* + * Setting the keyboard rate. + */ + +static int kbd_rate_helper(struct input_handle *handle, void *data) +{ + struct input_dev *dev = handle->dev; + struct kbd_repeat *rpt = data; + + if (test_bit(EV_REP, dev->evbit)) { + + if (rpt[0].delay > 0) + input_inject_event(handle, + EV_REP, REP_DELAY, rpt[0].delay); + if (rpt[0].period > 0) + input_inject_event(handle, + EV_REP, REP_PERIOD, rpt[0].period); + + rpt[1].delay = dev->rep[REP_DELAY]; + rpt[1].period = dev->rep[REP_PERIOD]; + } + + return 0; +} + +int kbd_rate(struct kbd_repeat *rpt) +{ + struct kbd_repeat data[2] = { *rpt }; + + input_handler_for_each_handle(&kbd_handler, data, kbd_rate_helper); + *rpt = data[1]; /* Copy currently used settings */ + + return 0; +} + +/* + * Helper Functions. + */ +static void put_queue(struct vc_data *vc, int ch) +{ + tty_insert_flip_char(&vc->port, ch, 0); + tty_flip_buffer_push(&vc->port); +} + +static void puts_queue(struct vc_data *vc, char *cp) +{ + while (*cp) { + tty_insert_flip_char(&vc->port, *cp, 0); + cp++; + } + tty_flip_buffer_push(&vc->port); +} + +static void applkey(struct vc_data *vc, int key, char mode) +{ + static char buf[] = { 0x1b, 'O', 0x00, 0x00 }; + + buf[1] = (mode ? 'O' : '['); + buf[2] = key; + puts_queue(vc, buf); +} + +/* + * Many other routines do put_queue, but I think either + * they produce ASCII, or they produce some user-assigned + * string, and in both cases we might assume that it is + * in utf-8 already. + */ +static void to_utf8(struct vc_data *vc, uint c) +{ + if (c < 0x80) + /* 0******* */ + put_queue(vc, c); + else if (c < 0x800) { + /* 110***** 10****** */ + put_queue(vc, 0xc0 | (c >> 6)); + put_queue(vc, 0x80 | (c & 0x3f)); + } else if (c < 0x10000) { + if (c >= 0xD800 && c < 0xE000) + return; + if (c == 0xFFFF) + return; + /* 1110**** 10****** 10****** */ + put_queue(vc, 0xe0 | (c >> 12)); + put_queue(vc, 0x80 | ((c >> 6) & 0x3f)); + put_queue(vc, 0x80 | (c & 0x3f)); + } else if (c < 0x110000) { + /* 11110*** 10****** 10****** 10****** */ + put_queue(vc, 0xf0 | (c >> 18)); + put_queue(vc, 0x80 | ((c >> 12) & 0x3f)); + put_queue(vc, 0x80 | ((c >> 6) & 0x3f)); + put_queue(vc, 0x80 | (c & 0x3f)); + } +} + +/* + * Called after returning from RAW mode or when changing consoles - recompute + * shift_down[] and shift_state from key_down[] maybe called when keymap is + * undefined, so that shiftkey release is seen. The caller must hold the + * kbd_event_lock. + */ + +static void do_compute_shiftstate(void) +{ + unsigned int k, sym, val; + + shift_state = 0; + memset(shift_down, 0, sizeof(shift_down)); + + for_each_set_bit(k, key_down, min(NR_KEYS, KEY_CNT)) { + sym = U(key_maps[0][k]); + if (KTYP(sym) != KT_SHIFT && KTYP(sym) != KT_SLOCK) + continue; + + val = KVAL(sym); + if (val == KVAL(K_CAPSSHIFT)) + val = KVAL(K_SHIFT); + + shift_down[val]++; + shift_state |= BIT(val); + } +} + +/* We still have to export this method to vt.c */ +void compute_shiftstate(void) +{ + unsigned long flags; + spin_lock_irqsave(&kbd_event_lock, flags); + do_compute_shiftstate(); + spin_unlock_irqrestore(&kbd_event_lock, flags); +} + +/* + * We have a combining character DIACR here, followed by the character CH. + * If the combination occurs in the table, return the corresponding value. + * Otherwise, if CH is a space or equals DIACR, return DIACR. + * Otherwise, conclude that DIACR was not combining after all, + * queue it and return CH. + */ +static unsigned int handle_diacr(struct vc_data *vc, unsigned int ch) +{ + unsigned int d = diacr; + unsigned int i; + + diacr = 0; + + if ((d & ~0xff) == BRL_UC_ROW) { + if ((ch & ~0xff) == BRL_UC_ROW) + return d | ch; + } else { + for (i = 0; i < accent_table_size; i++) + if (accent_table[i].diacr == d && accent_table[i].base == ch) + return accent_table[i].result; + } + + if (ch == ' ' || ch == (BRL_UC_ROW|0) || ch == d) + return d; + + if (kbd->kbdmode == VC_UNICODE) + to_utf8(vc, d); + else { + int c = conv_uni_to_8bit(d); + if (c != -1) + put_queue(vc, c); + } + + return ch; +} + +/* + * Special function handlers + */ +static void fn_enter(struct vc_data *vc) +{ + if (diacr) { + if (kbd->kbdmode == VC_UNICODE) + to_utf8(vc, diacr); + else { + int c = conv_uni_to_8bit(diacr); + if (c != -1) + put_queue(vc, c); + } + diacr = 0; + } + + put_queue(vc, 13); + if (vc_kbd_mode(kbd, VC_CRLF)) + put_queue(vc, 10); +} + +static void fn_caps_toggle(struct vc_data *vc) +{ + if (rep) + return; + + chg_vc_kbd_led(kbd, VC_CAPSLOCK); +} + +static void fn_caps_on(struct vc_data *vc) +{ + if (rep) + return; + + set_vc_kbd_led(kbd, VC_CAPSLOCK); +} + +static void fn_show_ptregs(struct vc_data *vc) +{ + struct pt_regs *regs = get_irq_regs(); + + if (regs) + show_regs(regs); +} + +static void fn_hold(struct vc_data *vc) +{ + struct tty_struct *tty = vc->port.tty; + + if (rep || !tty) + return; + + /* + * Note: SCROLLOCK will be set (cleared) by stop_tty (start_tty); + * these routines are also activated by ^S/^Q. + * (And SCROLLOCK can also be set by the ioctl KDSKBLED.) + */ + if (tty->stopped) + start_tty(tty); + else + stop_tty(tty); +} + +static void fn_num(struct vc_data *vc) +{ + if (vc_kbd_mode(kbd, VC_APPLIC)) + applkey(vc, 'P', 1); + else + fn_bare_num(vc); +} + +/* + * Bind this to Shift-NumLock if you work in application keypad mode + * but want to be able to change the NumLock flag. + * Bind this to NumLock if you prefer that the NumLock key always + * changes the NumLock flag. + */ +static void fn_bare_num(struct vc_data *vc) +{ + if (!rep) + chg_vc_kbd_led(kbd, VC_NUMLOCK); +} + +static void fn_lastcons(struct vc_data *vc) +{ + /* switch to the last used console, ChN */ + set_console(last_console); +} + +static void fn_dec_console(struct vc_data *vc) +{ + int i, cur = fg_console; + + /* Currently switching? Queue this next switch relative to that. */ + if (want_console != -1) + cur = want_console; + + for (i = cur - 1; i != cur; i--) { + if (i == -1) + i = MAX_NR_CONSOLES - 1; + if (vc_cons_allocated(i)) + break; + } + set_console(i); +} + +static void fn_inc_console(struct vc_data *vc) +{ + int i, cur = fg_console; + + /* Currently switching? Queue this next switch relative to that. */ + if (want_console != -1) + cur = want_console; + + for (i = cur+1; i != cur; i++) { + if (i == MAX_NR_CONSOLES) + i = 0; + if (vc_cons_allocated(i)) + break; + } + set_console(i); +} + +static void fn_send_intr(struct vc_data *vc) +{ + tty_insert_flip_char(&vc->port, 0, TTY_BREAK); + tty_flip_buffer_push(&vc->port); +} + +static void fn_scroll_forw(struct vc_data *vc) +{ + scrollfront(vc, 0); +} + +static void fn_scroll_back(struct vc_data *vc) +{ + scrollback(vc); +} + +static void fn_show_mem(struct vc_data *vc) +{ + show_mem(0, NULL); +} + +static void fn_show_state(struct vc_data *vc) +{ + show_state(); +} + +static void fn_boot_it(struct vc_data *vc) +{ + ctrl_alt_del(); +} + +static void fn_compose(struct vc_data *vc) +{ + dead_key_next = true; +} + +static void fn_spawn_con(struct vc_data *vc) +{ + spin_lock(&vt_spawn_con.lock); + if (vt_spawn_con.pid) + if (kill_pid(vt_spawn_con.pid, vt_spawn_con.sig, 1)) { + put_pid(vt_spawn_con.pid); + vt_spawn_con.pid = NULL; + } + spin_unlock(&vt_spawn_con.lock); +} + +static void fn_SAK(struct vc_data *vc) +{ + struct work_struct *SAK_work = &vc_cons[fg_console].SAK_work; + schedule_work(SAK_work); +} + +static void fn_null(struct vc_data *vc) +{ + do_compute_shiftstate(); +} + +/* + * Special key handlers + */ +static void k_ignore(struct vc_data *vc, unsigned char value, char up_flag) +{ +} + +static void k_spec(struct vc_data *vc, unsigned char value, char up_flag) +{ + if (up_flag) + return; + if (value >= ARRAY_SIZE(fn_handler)) + return; + if ((kbd->kbdmode == VC_RAW || + kbd->kbdmode == VC_MEDIUMRAW || + kbd->kbdmode == VC_OFF) && + value != KVAL(K_SAK)) + return; /* SAK is allowed even in raw mode */ + fn_handler[value](vc); +} + +static void k_lowercase(struct vc_data *vc, unsigned char value, char up_flag) +{ + pr_err("k_lowercase was called - impossible\n"); +} + +static void k_unicode(struct vc_data *vc, unsigned int value, char up_flag) +{ + if (up_flag) + return; /* no action, if this is a key release */ + + if (diacr) + value = handle_diacr(vc, value); + + if (dead_key_next) { + dead_key_next = false; + diacr = value; + return; + } + if (kbd->kbdmode == VC_UNICODE) + to_utf8(vc, value); + else { + int c = conv_uni_to_8bit(value); + if (c != -1) + put_queue(vc, c); + } +} + +/* + * Handle dead key. Note that we now may have several + * dead keys modifying the same character. Very useful + * for Vietnamese. + */ +static void k_deadunicode(struct vc_data *vc, unsigned int value, char up_flag) +{ + if (up_flag) + return; + + diacr = (diacr ? handle_diacr(vc, value) : value); +} + +static void k_self(struct vc_data *vc, unsigned char value, char up_flag) +{ + k_unicode(vc, conv_8bit_to_uni(value), up_flag); +} + +static void k_dead2(struct vc_data *vc, unsigned char value, char up_flag) +{ + k_deadunicode(vc, value, up_flag); +} + +/* + * Obsolete - for backwards compatibility only + */ +static void k_dead(struct vc_data *vc, unsigned char value, char up_flag) +{ + static const unsigned char ret_diacr[NR_DEAD] = { + '`', /* dead_grave */ + '\'', /* dead_acute */ + '^', /* dead_circumflex */ + '~', /* dead_tilda */ + '"', /* dead_diaeresis */ + ',', /* dead_cedilla */ + '_', /* dead_macron */ + 'U', /* dead_breve */ + '.', /* dead_abovedot */ + '*', /* dead_abovering */ + '=', /* dead_doubleacute */ + 'c', /* dead_caron */ + 'k', /* dead_ogonek */ + 'i', /* dead_iota */ + '#', /* dead_voiced_sound */ + 'o', /* dead_semivoiced_sound */ + '!', /* dead_belowdot */ + '?', /* dead_hook */ + '+', /* dead_horn */ + '-', /* dead_stroke */ + ')', /* dead_abovecomma */ + '(', /* dead_abovereversedcomma */ + ':', /* dead_doublegrave */ + 'n', /* dead_invertedbreve */ + ';', /* dead_belowcomma */ + '$', /* dead_currency */ + '@', /* dead_greek */ + }; + + k_deadunicode(vc, ret_diacr[value], up_flag); +} + +static void k_cons(struct vc_data *vc, unsigned char value, char up_flag) +{ + if (up_flag) + return; + + set_console(value); +} + +static void k_fn(struct vc_data *vc, unsigned char value, char up_flag) +{ + if (up_flag) + return; + + if ((unsigned)value < ARRAY_SIZE(func_table)) { + unsigned long flags; + + spin_lock_irqsave(&func_buf_lock, flags); + if (func_table[value]) + puts_queue(vc, func_table[value]); + spin_unlock_irqrestore(&func_buf_lock, flags); + + } else + pr_err("k_fn called with value=%d\n", value); +} + +static void k_cur(struct vc_data *vc, unsigned char value, char up_flag) +{ + static const char cur_chars[] = "BDCA"; + + if (up_flag) + return; + + applkey(vc, cur_chars[value], vc_kbd_mode(kbd, VC_CKMODE)); +} + +static void k_pad(struct vc_data *vc, unsigned char value, char up_flag) +{ + static const char pad_chars[] = "0123456789+-*/\015,.?()#"; + static const char app_map[] = "pqrstuvwxylSRQMnnmPQS"; + + if (up_flag) + return; /* no action, if this is a key release */ + + /* kludge... shift forces cursor/number keys */ + if (vc_kbd_mode(kbd, VC_APPLIC) && !shift_down[KG_SHIFT]) { + applkey(vc, app_map[value], 1); + return; + } + + if (!vc_kbd_led(kbd, VC_NUMLOCK)) { + + switch (value) { + case KVAL(K_PCOMMA): + case KVAL(K_PDOT): + k_fn(vc, KVAL(K_REMOVE), 0); + return; + case KVAL(K_P0): + k_fn(vc, KVAL(K_INSERT), 0); + return; + case KVAL(K_P1): + k_fn(vc, KVAL(K_SELECT), 0); + return; + case KVAL(K_P2): + k_cur(vc, KVAL(K_DOWN), 0); + return; + case KVAL(K_P3): + k_fn(vc, KVAL(K_PGDN), 0); + return; + case KVAL(K_P4): + k_cur(vc, KVAL(K_LEFT), 0); + return; + case KVAL(K_P6): + k_cur(vc, KVAL(K_RIGHT), 0); + return; + case KVAL(K_P7): + k_fn(vc, KVAL(K_FIND), 0); + return; + case KVAL(K_P8): + k_cur(vc, KVAL(K_UP), 0); + return; + case KVAL(K_P9): + k_fn(vc, KVAL(K_PGUP), 0); + return; + case KVAL(K_P5): + applkey(vc, 'G', vc_kbd_mode(kbd, VC_APPLIC)); + return; + } + } + + put_queue(vc, pad_chars[value]); + if (value == KVAL(K_PENTER) && vc_kbd_mode(kbd, VC_CRLF)) + put_queue(vc, 10); +} + +static void k_shift(struct vc_data *vc, unsigned char value, char up_flag) +{ + int old_state = shift_state; + + if (rep) + return; + /* + * Mimic typewriter: + * a CapsShift key acts like Shift but undoes CapsLock + */ + if (value == KVAL(K_CAPSSHIFT)) { + value = KVAL(K_SHIFT); + if (!up_flag) + clr_vc_kbd_led(kbd, VC_CAPSLOCK); + } + + if (up_flag) { + /* + * handle the case that two shift or control + * keys are depressed simultaneously + */ + if (shift_down[value]) + shift_down[value]--; + } else + shift_down[value]++; + + if (shift_down[value]) + shift_state |= (1 << value); + else + shift_state &= ~(1 << value); + + /* kludge */ + if (up_flag && shift_state != old_state && npadch_active) { + if (kbd->kbdmode == VC_UNICODE) + to_utf8(vc, npadch_value); + else + put_queue(vc, npadch_value & 0xff); + npadch_active = false; + } +} + +static void k_meta(struct vc_data *vc, unsigned char value, char up_flag) +{ + if (up_flag) + return; + + if (vc_kbd_mode(kbd, VC_META)) { + put_queue(vc, '\033'); + put_queue(vc, value); + } else + put_queue(vc, value | 0x80); +} + +static void k_ascii(struct vc_data *vc, unsigned char value, char up_flag) +{ + unsigned int base; + + if (up_flag) + return; + + if (value < 10) { + /* decimal input of code, while Alt depressed */ + base = 10; + } else { + /* hexadecimal input of code, while AltGr depressed */ + value -= 10; + base = 16; + } + + if (!npadch_active) { + npadch_value = 0; + npadch_active = true; + } + + npadch_value = npadch_value * base + value; +} + +static void k_lock(struct vc_data *vc, unsigned char value, char up_flag) +{ + if (up_flag || rep) + return; + + chg_vc_kbd_lock(kbd, value); +} + +static void k_slock(struct vc_data *vc, unsigned char value, char up_flag) +{ + k_shift(vc, value, up_flag); + if (up_flag || rep) + return; + + chg_vc_kbd_slock(kbd, value); + /* try to make Alt, oops, AltGr and such work */ + if (!key_maps[kbd->lockstate ^ kbd->slockstate]) { + kbd->slockstate = 0; + chg_vc_kbd_slock(kbd, value); + } +} + +/* by default, 300ms interval for combination release */ +static unsigned brl_timeout = 300; +MODULE_PARM_DESC(brl_timeout, "Braille keys release delay in ms (0 for commit on first key release)"); +module_param(brl_timeout, uint, 0644); + +static unsigned brl_nbchords = 1; +MODULE_PARM_DESC(brl_nbchords, "Number of chords that produce a braille pattern (0 for dead chords)"); +module_param(brl_nbchords, uint, 0644); + +static void k_brlcommit(struct vc_data *vc, unsigned int pattern, char up_flag) +{ + static unsigned long chords; + static unsigned committed; + + if (!brl_nbchords) + k_deadunicode(vc, BRL_UC_ROW | pattern, up_flag); + else { + committed |= pattern; + chords++; + if (chords == brl_nbchords) { + k_unicode(vc, BRL_UC_ROW | committed, up_flag); + chords = 0; + committed = 0; + } + } +} + +static void k_brl(struct vc_data *vc, unsigned char value, char up_flag) +{ + static unsigned pressed, committing; + static unsigned long releasestart; + + if (kbd->kbdmode != VC_UNICODE) { + if (!up_flag) + pr_warn("keyboard mode must be unicode for braille patterns\n"); + return; + } + + if (!value) { + k_unicode(vc, BRL_UC_ROW, up_flag); + return; + } + + if (value > 8) + return; + + if (!up_flag) { + pressed |= 1 << (value - 1); + if (!brl_timeout) + committing = pressed; + } else if (brl_timeout) { + if (!committing || + time_after(jiffies, + releasestart + msecs_to_jiffies(brl_timeout))) { + committing = pressed; + releasestart = jiffies; + } + pressed &= ~(1 << (value - 1)); + if (!pressed && committing) { + k_brlcommit(vc, committing, 0); + committing = 0; + } + } else { + if (committing) { + k_brlcommit(vc, committing, 0); + committing = 0; + } + pressed &= ~(1 << (value - 1)); + } +} + +#if IS_ENABLED(CONFIG_INPUT_LEDS) && IS_ENABLED(CONFIG_LEDS_TRIGGERS) + +struct kbd_led_trigger { + struct led_trigger trigger; + unsigned int mask; +}; + +static int kbd_led_trigger_activate(struct led_classdev *cdev) +{ + struct kbd_led_trigger *trigger = + container_of(cdev->trigger, struct kbd_led_trigger, trigger); + + tasklet_disable(&keyboard_tasklet); + if (ledstate != -1U) + led_trigger_event(&trigger->trigger, + ledstate & trigger->mask ? + LED_FULL : LED_OFF); + tasklet_enable(&keyboard_tasklet); + + return 0; +} + +#define KBD_LED_TRIGGER(_led_bit, _name) { \ + .trigger = { \ + .name = _name, \ + .activate = kbd_led_trigger_activate, \ + }, \ + .mask = BIT(_led_bit), \ + } + +#define KBD_LOCKSTATE_TRIGGER(_led_bit, _name) \ + KBD_LED_TRIGGER((_led_bit) + 8, _name) + +static struct kbd_led_trigger kbd_led_triggers[] = { + KBD_LED_TRIGGER(VC_SCROLLOCK, "kbd-scrolllock"), + KBD_LED_TRIGGER(VC_NUMLOCK, "kbd-numlock"), + KBD_LED_TRIGGER(VC_CAPSLOCK, "kbd-capslock"), + KBD_LED_TRIGGER(VC_KANALOCK, "kbd-kanalock"), + + KBD_LOCKSTATE_TRIGGER(VC_SHIFTLOCK, "kbd-shiftlock"), + KBD_LOCKSTATE_TRIGGER(VC_ALTGRLOCK, "kbd-altgrlock"), + KBD_LOCKSTATE_TRIGGER(VC_CTRLLOCK, "kbd-ctrllock"), + KBD_LOCKSTATE_TRIGGER(VC_ALTLOCK, "kbd-altlock"), + KBD_LOCKSTATE_TRIGGER(VC_SHIFTLLOCK, "kbd-shiftllock"), + KBD_LOCKSTATE_TRIGGER(VC_SHIFTRLOCK, "kbd-shiftrlock"), + KBD_LOCKSTATE_TRIGGER(VC_CTRLLLOCK, "kbd-ctrlllock"), + KBD_LOCKSTATE_TRIGGER(VC_CTRLRLOCK, "kbd-ctrlrlock"), +}; + +static void kbd_propagate_led_state(unsigned int old_state, + unsigned int new_state) +{ + struct kbd_led_trigger *trigger; + unsigned int changed = old_state ^ new_state; + int i; + + for (i = 0; i < ARRAY_SIZE(kbd_led_triggers); i++) { + trigger = &kbd_led_triggers[i]; + + if (changed & trigger->mask) + led_trigger_event(&trigger->trigger, + new_state & trigger->mask ? + LED_FULL : LED_OFF); + } +} + +static int kbd_update_leds_helper(struct input_handle *handle, void *data) +{ + unsigned int led_state = *(unsigned int *)data; + + if (test_bit(EV_LED, handle->dev->evbit)) + kbd_propagate_led_state(~led_state, led_state); + + return 0; +} + +static void kbd_init_leds(void) +{ + int error; + int i; + + for (i = 0; i < ARRAY_SIZE(kbd_led_triggers); i++) { + error = led_trigger_register(&kbd_led_triggers[i].trigger); + if (error) + pr_err("error %d while registering trigger %s\n", + error, kbd_led_triggers[i].trigger.name); + } +} + +#else + +static int kbd_update_leds_helper(struct input_handle *handle, void *data) +{ + unsigned int leds = *(unsigned int *)data; + + if (test_bit(EV_LED, handle->dev->evbit)) { + input_inject_event(handle, EV_LED, LED_SCROLLL, !!(leds & 0x01)); + input_inject_event(handle, EV_LED, LED_NUML, !!(leds & 0x02)); + input_inject_event(handle, EV_LED, LED_CAPSL, !!(leds & 0x04)); + input_inject_event(handle, EV_SYN, SYN_REPORT, 0); + } + + return 0; +} + +static void kbd_propagate_led_state(unsigned int old_state, + unsigned int new_state) +{ + input_handler_for_each_handle(&kbd_handler, &new_state, + kbd_update_leds_helper); +} + +static void kbd_init_leds(void) +{ +} + +#endif + +/* + * The leds display either (i) the status of NumLock, CapsLock, ScrollLock, + * or (ii) whatever pattern of lights people want to show using KDSETLED, + * or (iii) specified bits of specified words in kernel memory. + */ +static unsigned char getledstate(void) +{ + return ledstate & 0xff; +} + +void setledstate(struct kbd_struct *kb, unsigned int led) +{ + unsigned long flags; + spin_lock_irqsave(&led_lock, flags); + if (!(led & ~7)) { + ledioctl = led; + kb->ledmode = LED_SHOW_IOCTL; + } else + kb->ledmode = LED_SHOW_FLAGS; + + set_leds(); + spin_unlock_irqrestore(&led_lock, flags); +} + +static inline unsigned char getleds(void) +{ + struct kbd_struct *kb = kbd_table + fg_console; + + if (kb->ledmode == LED_SHOW_IOCTL) + return ledioctl; + + return kb->ledflagstate; +} + +/** + * vt_get_leds - helper for braille console + * @console: console to read + * @flag: flag we want to check + * + * Check the status of a keyboard led flag and report it back + */ +int vt_get_leds(int console, int flag) +{ + struct kbd_struct *kb = kbd_table + console; + int ret; + unsigned long flags; + + spin_lock_irqsave(&led_lock, flags); + ret = vc_kbd_led(kb, flag); + spin_unlock_irqrestore(&led_lock, flags); + + return ret; +} +EXPORT_SYMBOL_GPL(vt_get_leds); + +/** + * vt_set_led_state - set LED state of a console + * @console: console to set + * @leds: LED bits + * + * Set the LEDs on a console. This is a wrapper for the VT layer + * so that we can keep kbd knowledge internal + */ +void vt_set_led_state(int console, int leds) +{ + struct kbd_struct *kb = kbd_table + console; + setledstate(kb, leds); +} + +/** + * vt_kbd_con_start - Keyboard side of console start + * @console: console + * + * Handle console start. This is a wrapper for the VT layer + * so that we can keep kbd knowledge internal + * + * FIXME: We eventually need to hold the kbd lock here to protect + * the LED updating. We can't do it yet because fn_hold calls stop_tty + * and start_tty under the kbd_event_lock, while normal tty paths + * don't hold the lock. We probably need to split out an LED lock + * but not during an -rc release! + */ +void vt_kbd_con_start(int console) +{ + struct kbd_struct *kb = kbd_table + console; + unsigned long flags; + spin_lock_irqsave(&led_lock, flags); + clr_vc_kbd_led(kb, VC_SCROLLOCK); + set_leds(); + spin_unlock_irqrestore(&led_lock, flags); +} + +/** + * vt_kbd_con_stop - Keyboard side of console stop + * @console: console + * + * Handle console stop. This is a wrapper for the VT layer + * so that we can keep kbd knowledge internal + */ +void vt_kbd_con_stop(int console) +{ + struct kbd_struct *kb = kbd_table + console; + unsigned long flags; + spin_lock_irqsave(&led_lock, flags); + set_vc_kbd_led(kb, VC_SCROLLOCK); + set_leds(); + spin_unlock_irqrestore(&led_lock, flags); +} + +/* + * This is the tasklet that updates LED state of LEDs using standard + * keyboard triggers. The reason we use tasklet is that we need to + * handle the scenario when keyboard handler is not registered yet + * but we already getting updates from the VT to update led state. + */ +static void kbd_bh(unsigned long dummy) +{ + unsigned int leds; + unsigned long flags; + + spin_lock_irqsave(&led_lock, flags); + leds = getleds(); + leds |= (unsigned int)kbd->lockstate << 8; + spin_unlock_irqrestore(&led_lock, flags); + + if (leds != ledstate) { + kbd_propagate_led_state(ledstate, leds); + ledstate = leds; + } +} + +DECLARE_TASKLET_DISABLED_OLD(keyboard_tasklet, kbd_bh); + +#if defined(CONFIG_X86) || defined(CONFIG_IA64) || defined(CONFIG_ALPHA) ||\ + defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_SPARC) ||\ + defined(CONFIG_PARISC) || defined(CONFIG_SUPERH) ||\ + (defined(CONFIG_ARM) && defined(CONFIG_KEYBOARD_ATKBD) && !defined(CONFIG_ARCH_RPC)) + +#define HW_RAW(dev) (test_bit(EV_MSC, dev->evbit) && test_bit(MSC_RAW, dev->mscbit) &&\ + ((dev)->id.bustype == BUS_I8042) && ((dev)->id.vendor == 0x0001) && ((dev)->id.product == 0x0001)) + +static const unsigned short x86_keycodes[256] = + { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, + 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, + 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, + 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, + 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, + 80, 81, 82, 83, 84,118, 86, 87, 88,115,120,119,121,112,123, 92, + 284,285,309, 0,312, 91,327,328,329,331,333,335,336,337,338,339, + 367,288,302,304,350, 89,334,326,267,126,268,269,125,347,348,349, + 360,261,262,263,268,376,100,101,321,316,373,286,289,102,351,355, + 103,104,105,275,287,279,258,106,274,107,294,364,358,363,362,361, + 291,108,381,281,290,272,292,305,280, 99,112,257,306,359,113,114, + 264,117,271,374,379,265,266, 93, 94, 95, 85,259,375,260, 90,116, + 377,109,111,277,278,282,283,295,296,297,299,300,301,293,303,307, + 308,310,313,314,315,317,318,319,320,357,322,323,324,325,276,330, + 332,340,365,342,343,344,345,346,356,270,341,368,369,370,371,372 }; + +#ifdef CONFIG_SPARC +static int sparc_l1_a_state; +extern void sun_do_break(void); +#endif + +static int emulate_raw(struct vc_data *vc, unsigned int keycode, + unsigned char up_flag) +{ + int code; + + switch (keycode) { + + case KEY_PAUSE: + put_queue(vc, 0xe1); + put_queue(vc, 0x1d | up_flag); + put_queue(vc, 0x45 | up_flag); + break; + + case KEY_HANGEUL: + if (!up_flag) + put_queue(vc, 0xf2); + break; + + case KEY_HANJA: + if (!up_flag) + put_queue(vc, 0xf1); + break; + + case KEY_SYSRQ: + /* + * Real AT keyboards (that's what we're trying + * to emulate here) emit 0xe0 0x2a 0xe0 0x37 when + * pressing PrtSc/SysRq alone, but simply 0x54 + * when pressing Alt+PrtSc/SysRq. + */ + if (test_bit(KEY_LEFTALT, key_down) || + test_bit(KEY_RIGHTALT, key_down)) { + put_queue(vc, 0x54 | up_flag); + } else { + put_queue(vc, 0xe0); + put_queue(vc, 0x2a | up_flag); + put_queue(vc, 0xe0); + put_queue(vc, 0x37 | up_flag); + } + break; + + default: + if (keycode > 255) + return -1; + + code = x86_keycodes[keycode]; + if (!code) + return -1; + + if (code & 0x100) + put_queue(vc, 0xe0); + put_queue(vc, (code & 0x7f) | up_flag); + + break; + } + + return 0; +} + +#else + +#define HW_RAW(dev) 0 + +static int emulate_raw(struct vc_data *vc, unsigned int keycode, unsigned char up_flag) +{ + if (keycode > 127) + return -1; + + put_queue(vc, keycode | up_flag); + return 0; +} +#endif + +static void kbd_rawcode(unsigned char data) +{ + struct vc_data *vc = vc_cons[fg_console].d; + + kbd = kbd_table + vc->vc_num; + if (kbd->kbdmode == VC_RAW) + put_queue(vc, data); +} + +static void kbd_keycode(unsigned int keycode, int down, int hw_raw) +{ + struct vc_data *vc = vc_cons[fg_console].d; + unsigned short keysym, *key_map; + unsigned char type; + bool raw_mode; + struct tty_struct *tty; + int shift_final; + struct keyboard_notifier_param param = { .vc = vc, .value = keycode, .down = down }; + int rc; + + tty = vc->port.tty; + + if (tty && (!tty->driver_data)) { + /* No driver data? Strange. Okay we fix it then. */ + tty->driver_data = vc; + } + + kbd = kbd_table + vc->vc_num; + +#ifdef CONFIG_SPARC + if (keycode == KEY_STOP) + sparc_l1_a_state = down; +#endif + + rep = (down == 2); + + raw_mode = (kbd->kbdmode == VC_RAW); + if (raw_mode && !hw_raw) + if (emulate_raw(vc, keycode, !down << 7)) + if (keycode < BTN_MISC && printk_ratelimit()) + pr_warn("can't emulate rawmode for keycode %d\n", + keycode); + +#ifdef CONFIG_SPARC + if (keycode == KEY_A && sparc_l1_a_state) { + sparc_l1_a_state = false; + sun_do_break(); + } +#endif + + if (kbd->kbdmode == VC_MEDIUMRAW) { + /* + * This is extended medium raw mode, with keys above 127 + * encoded as 0, high 7 bits, low 7 bits, with the 0 bearing + * the 'up' flag if needed. 0 is reserved, so this shouldn't + * interfere with anything else. The two bytes after 0 will + * always have the up flag set not to interfere with older + * applications. This allows for 16384 different keycodes, + * which should be enough. + */ + if (keycode < 128) { + put_queue(vc, keycode | (!down << 7)); + } else { + put_queue(vc, !down << 7); + put_queue(vc, (keycode >> 7) | 0x80); + put_queue(vc, keycode | 0x80); + } + raw_mode = true; + } + + if (down) + set_bit(keycode, key_down); + else + clear_bit(keycode, key_down); + + if (rep && + (!vc_kbd_mode(kbd, VC_REPEAT) || + (tty && !L_ECHO(tty) && tty_chars_in_buffer(tty)))) { + /* + * Don't repeat a key if the input buffers are not empty and the + * characters get aren't echoed locally. This makes key repeat + * usable with slow applications and under heavy loads. + */ + return; + } + + param.shift = shift_final = (shift_state | kbd->slockstate) ^ kbd->lockstate; + param.ledstate = kbd->ledflagstate; + key_map = key_maps[shift_final]; + + rc = atomic_notifier_call_chain(&keyboard_notifier_list, + KBD_KEYCODE, ¶m); + if (rc == NOTIFY_STOP || !key_map) { + atomic_notifier_call_chain(&keyboard_notifier_list, + KBD_UNBOUND_KEYCODE, ¶m); + do_compute_shiftstate(); + kbd->slockstate = 0; + return; + } + + if (keycode < NR_KEYS) + keysym = key_map[keycode]; + else if (keycode >= KEY_BRL_DOT1 && keycode <= KEY_BRL_DOT8) + keysym = U(K(KT_BRL, keycode - KEY_BRL_DOT1 + 1)); + else + return; + + type = KTYP(keysym); + + if (type < 0xf0) { + param.value = keysym; + rc = atomic_notifier_call_chain(&keyboard_notifier_list, + KBD_UNICODE, ¶m); + if (rc != NOTIFY_STOP) + if (down && !raw_mode) + k_unicode(vc, keysym, !down); + return; + } + + type -= 0xf0; + + if (type == KT_LETTER) { + type = KT_LATIN; + if (vc_kbd_led(kbd, VC_CAPSLOCK)) { + key_map = key_maps[shift_final ^ (1 << KG_SHIFT)]; + if (key_map) + keysym = key_map[keycode]; + } + } + + param.value = keysym; + rc = atomic_notifier_call_chain(&keyboard_notifier_list, + KBD_KEYSYM, ¶m); + if (rc == NOTIFY_STOP) + return; + + if ((raw_mode || kbd->kbdmode == VC_OFF) && type != KT_SPEC && type != KT_SHIFT) + return; + + (*k_handler[type])(vc, keysym & 0xff, !down); + + param.ledstate = kbd->ledflagstate; + atomic_notifier_call_chain(&keyboard_notifier_list, KBD_POST_KEYSYM, ¶m); + + if (type != KT_SLOCK) + kbd->slockstate = 0; +} + +static void kbd_event(struct input_handle *handle, unsigned int event_type, + unsigned int event_code, int value) +{ + /* We are called with interrupts disabled, just take the lock */ + spin_lock(&kbd_event_lock); + + if (event_type == EV_MSC && event_code == MSC_RAW && HW_RAW(handle->dev)) + kbd_rawcode(value); + if (event_type == EV_KEY && event_code <= KEY_MAX) + kbd_keycode(event_code, value, HW_RAW(handle->dev)); + + spin_unlock(&kbd_event_lock); + + tasklet_schedule(&keyboard_tasklet); + do_poke_blanked_console = 1; + schedule_console_callback(); +} + +static bool kbd_match(struct input_handler *handler, struct input_dev *dev) +{ + int i; + + if (test_bit(EV_SND, dev->evbit)) + return true; + + if (test_bit(EV_KEY, dev->evbit)) { + for (i = KEY_RESERVED; i < BTN_MISC; i++) + if (test_bit(i, dev->keybit)) + return true; + for (i = KEY_BRL_DOT1; i <= KEY_BRL_DOT10; i++) + if (test_bit(i, dev->keybit)) + return true; + } + + return false; +} + +/* + * When a keyboard (or other input device) is found, the kbd_connect + * function is called. The function then looks at the device, and if it + * likes it, it can open it and get events from it. In this (kbd_connect) + * function, we should decide which VT to bind that keyboard to initially. + */ +static int kbd_connect(struct input_handler *handler, struct input_dev *dev, + const struct input_device_id *id) +{ + struct input_handle *handle; + int error; + + handle = kzalloc(sizeof(struct input_handle), GFP_KERNEL); + if (!handle) + return -ENOMEM; + + handle->dev = dev; + handle->handler = handler; + handle->name = "kbd"; + + error = input_register_handle(handle); + if (error) + goto err_free_handle; + + error = input_open_device(handle); + if (error) + goto err_unregister_handle; + + return 0; + + err_unregister_handle: + input_unregister_handle(handle); + err_free_handle: + kfree(handle); + return error; +} + +static void kbd_disconnect(struct input_handle *handle) +{ + input_close_device(handle); + input_unregister_handle(handle); + kfree(handle); +} + +/* + * Start keyboard handler on the new keyboard by refreshing LED state to + * match the rest of the system. + */ +static void kbd_start(struct input_handle *handle) +{ + tasklet_disable(&keyboard_tasklet); + + if (ledstate != -1U) + kbd_update_leds_helper(handle, &ledstate); + + tasklet_enable(&keyboard_tasklet); +} + +static const struct input_device_id kbd_ids[] = { + { + .flags = INPUT_DEVICE_ID_MATCH_EVBIT, + .evbit = { BIT_MASK(EV_KEY) }, + }, + + { + .flags = INPUT_DEVICE_ID_MATCH_EVBIT, + .evbit = { BIT_MASK(EV_SND) }, + }, + + { }, /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(input, kbd_ids); + +static struct input_handler kbd_handler = { + .event = kbd_event, + .match = kbd_match, + .connect = kbd_connect, + .disconnect = kbd_disconnect, + .start = kbd_start, + .name = "kbd", + .id_table = kbd_ids, +}; + +int __init kbd_init(void) +{ + int i; + int error; + + for (i = 0; i < MAX_NR_CONSOLES; i++) { + kbd_table[i].ledflagstate = kbd_defleds(); + kbd_table[i].default_ledflagstate = kbd_defleds(); + kbd_table[i].ledmode = LED_SHOW_FLAGS; + kbd_table[i].lockstate = KBD_DEFLOCK; + kbd_table[i].slockstate = 0; + kbd_table[i].modeflags = KBD_DEFMODE; + kbd_table[i].kbdmode = default_utf8 ? VC_UNICODE : VC_XLATE; + } + + kbd_init_leds(); + + error = input_register_handler(&kbd_handler); + if (error) + return error; + + tasklet_enable(&keyboard_tasklet); + tasklet_schedule(&keyboard_tasklet); + + return 0; +} + +/* Ioctl support code */ + +/** + * vt_do_diacrit - diacritical table updates + * @cmd: ioctl request + * @udp: pointer to user data for ioctl + * @perm: permissions check computed by caller + * + * Update the diacritical tables atomically and safely. Lock them + * against simultaneous keypresses + */ +int vt_do_diacrit(unsigned int cmd, void __user *udp, int perm) +{ + unsigned long flags; + int asize; + int ret = 0; + + switch (cmd) { + case KDGKBDIACR: + { + struct kbdiacrs __user *a = udp; + struct kbdiacr *dia; + int i; + + dia = kmalloc_array(MAX_DIACR, sizeof(struct kbdiacr), + GFP_KERNEL); + if (!dia) + return -ENOMEM; + + /* Lock the diacriticals table, make a copy and then + copy it after we unlock */ + spin_lock_irqsave(&kbd_event_lock, flags); + + asize = accent_table_size; + for (i = 0; i < asize; i++) { + dia[i].diacr = conv_uni_to_8bit( + accent_table[i].diacr); + dia[i].base = conv_uni_to_8bit( + accent_table[i].base); + dia[i].result = conv_uni_to_8bit( + accent_table[i].result); + } + spin_unlock_irqrestore(&kbd_event_lock, flags); + + if (put_user(asize, &a->kb_cnt)) + ret = -EFAULT; + else if (copy_to_user(a->kbdiacr, dia, + asize * sizeof(struct kbdiacr))) + ret = -EFAULT; + kfree(dia); + return ret; + } + case KDGKBDIACRUC: + { + struct kbdiacrsuc __user *a = udp; + void *buf; + + buf = kmalloc_array(MAX_DIACR, sizeof(struct kbdiacruc), + GFP_KERNEL); + if (buf == NULL) + return -ENOMEM; + + /* Lock the diacriticals table, make a copy and then + copy it after we unlock */ + spin_lock_irqsave(&kbd_event_lock, flags); + + asize = accent_table_size; + memcpy(buf, accent_table, asize * sizeof(struct kbdiacruc)); + + spin_unlock_irqrestore(&kbd_event_lock, flags); + + if (put_user(asize, &a->kb_cnt)) + ret = -EFAULT; + else if (copy_to_user(a->kbdiacruc, buf, + asize*sizeof(struct kbdiacruc))) + ret = -EFAULT; + kfree(buf); + return ret; + } + + case KDSKBDIACR: + { + struct kbdiacrs __user *a = udp; + struct kbdiacr *dia = NULL; + unsigned int ct; + int i; + + if (!perm) + return -EPERM; + if (get_user(ct, &a->kb_cnt)) + return -EFAULT; + if (ct >= MAX_DIACR) + return -EINVAL; + + if (ct) { + + dia = memdup_user(a->kbdiacr, + sizeof(struct kbdiacr) * ct); + if (IS_ERR(dia)) + return PTR_ERR(dia); + + } + + spin_lock_irqsave(&kbd_event_lock, flags); + accent_table_size = ct; + for (i = 0; i < ct; i++) { + accent_table[i].diacr = + conv_8bit_to_uni(dia[i].diacr); + accent_table[i].base = + conv_8bit_to_uni(dia[i].base); + accent_table[i].result = + conv_8bit_to_uni(dia[i].result); + } + spin_unlock_irqrestore(&kbd_event_lock, flags); + kfree(dia); + return 0; + } + + case KDSKBDIACRUC: + { + struct kbdiacrsuc __user *a = udp; + unsigned int ct; + void *buf = NULL; + + if (!perm) + return -EPERM; + + if (get_user(ct, &a->kb_cnt)) + return -EFAULT; + + if (ct >= MAX_DIACR) + return -EINVAL; + + if (ct) { + buf = memdup_user(a->kbdiacruc, + ct * sizeof(struct kbdiacruc)); + if (IS_ERR(buf)) + return PTR_ERR(buf); + } + spin_lock_irqsave(&kbd_event_lock, flags); + if (ct) + memcpy(accent_table, buf, + ct * sizeof(struct kbdiacruc)); + accent_table_size = ct; + spin_unlock_irqrestore(&kbd_event_lock, flags); + kfree(buf); + return 0; + } + } + return ret; +} + +/** + * vt_do_kdskbmode - set keyboard mode ioctl + * @console: the console to use + * @arg: the requested mode + * + * Update the keyboard mode bits while holding the correct locks. + * Return 0 for success or an error code. + */ +int vt_do_kdskbmode(int console, unsigned int arg) +{ + struct kbd_struct *kb = kbd_table + console; + int ret = 0; + unsigned long flags; + + spin_lock_irqsave(&kbd_event_lock, flags); + switch(arg) { + case K_RAW: + kb->kbdmode = VC_RAW; + break; + case K_MEDIUMRAW: + kb->kbdmode = VC_MEDIUMRAW; + break; + case K_XLATE: + kb->kbdmode = VC_XLATE; + do_compute_shiftstate(); + break; + case K_UNICODE: + kb->kbdmode = VC_UNICODE; + do_compute_shiftstate(); + break; + case K_OFF: + kb->kbdmode = VC_OFF; + break; + default: + ret = -EINVAL; + } + spin_unlock_irqrestore(&kbd_event_lock, flags); + return ret; +} + +/** + * vt_do_kdskbmeta - set keyboard meta state + * @console: the console to use + * @arg: the requested meta state + * + * Update the keyboard meta bits while holding the correct locks. + * Return 0 for success or an error code. + */ +int vt_do_kdskbmeta(int console, unsigned int arg) +{ + struct kbd_struct *kb = kbd_table + console; + int ret = 0; + unsigned long flags; + + spin_lock_irqsave(&kbd_event_lock, flags); + switch(arg) { + case K_METABIT: + clr_vc_kbd_mode(kb, VC_META); + break; + case K_ESCPREFIX: + set_vc_kbd_mode(kb, VC_META); + break; + default: + ret = -EINVAL; + } + spin_unlock_irqrestore(&kbd_event_lock, flags); + return ret; +} + +int vt_do_kbkeycode_ioctl(int cmd, struct kbkeycode __user *user_kbkc, + int perm) +{ + struct kbkeycode tmp; + int kc = 0; + + if (copy_from_user(&tmp, user_kbkc, sizeof(struct kbkeycode))) + return -EFAULT; + switch (cmd) { + case KDGETKEYCODE: + kc = getkeycode(tmp.scancode); + if (kc >= 0) + kc = put_user(kc, &user_kbkc->keycode); + break; + case KDSETKEYCODE: + if (!perm) + return -EPERM; + kc = setkeycode(tmp.scancode, tmp.keycode); + break; + } + return kc; +} + +#define i (tmp.kb_index) +#define s (tmp.kb_table) +#define v (tmp.kb_value) + +int vt_do_kdsk_ioctl(int cmd, struct kbentry __user *user_kbe, int perm, + int console) +{ + struct kbd_struct *kb = kbd_table + console; + struct kbentry tmp; + ushort *key_map, *new_map, val, ov; + unsigned long flags; + + if (copy_from_user(&tmp, user_kbe, sizeof(struct kbentry))) + return -EFAULT; + + if (!capable(CAP_SYS_TTY_CONFIG)) + perm = 0; + + switch (cmd) { + case KDGKBENT: + /* Ensure another thread doesn't free it under us */ + spin_lock_irqsave(&kbd_event_lock, flags); + key_map = key_maps[s]; + if (key_map) { + val = U(key_map[i]); + if (kb->kbdmode != VC_UNICODE && KTYP(val) >= NR_TYPES) + val = K_HOLE; + } else + val = (i ? K_HOLE : K_NOSUCHMAP); + spin_unlock_irqrestore(&kbd_event_lock, flags); + return put_user(val, &user_kbe->kb_value); + case KDSKBENT: + if (!perm) + return -EPERM; + if (!i && v == K_NOSUCHMAP) { + spin_lock_irqsave(&kbd_event_lock, flags); + /* deallocate map */ + key_map = key_maps[s]; + if (s && key_map) { + key_maps[s] = NULL; + if (key_map[0] == U(K_ALLOCATED)) { + kfree(key_map); + keymap_count--; + } + } + spin_unlock_irqrestore(&kbd_event_lock, flags); + break; + } + + if (KTYP(v) < NR_TYPES) { + if (KVAL(v) > max_vals[KTYP(v)]) + return -EINVAL; + } else + if (kb->kbdmode != VC_UNICODE) + return -EINVAL; + + /* ++Geert: non-PC keyboards may generate keycode zero */ +#if !defined(__mc68000__) && !defined(__powerpc__) + /* assignment to entry 0 only tests validity of args */ + if (!i) + break; +#endif + + new_map = kmalloc(sizeof(plain_map), GFP_KERNEL); + if (!new_map) + return -ENOMEM; + spin_lock_irqsave(&kbd_event_lock, flags); + key_map = key_maps[s]; + if (key_map == NULL) { + int j; + + if (keymap_count >= MAX_NR_OF_USER_KEYMAPS && + !capable(CAP_SYS_RESOURCE)) { + spin_unlock_irqrestore(&kbd_event_lock, flags); + kfree(new_map); + return -EPERM; + } + key_maps[s] = new_map; + key_map = new_map; + key_map[0] = U(K_ALLOCATED); + for (j = 1; j < NR_KEYS; j++) + key_map[j] = U(K_HOLE); + keymap_count++; + } else + kfree(new_map); + + ov = U(key_map[i]); + if (v == ov) + goto out; + /* + * Attention Key. + */ + if (((ov == K_SAK) || (v == K_SAK)) && !capable(CAP_SYS_ADMIN)) { + spin_unlock_irqrestore(&kbd_event_lock, flags); + return -EPERM; + } + key_map[i] = U(v); + if (!s && (KTYP(ov) == KT_SHIFT || KTYP(v) == KT_SHIFT)) + do_compute_shiftstate(); +out: + spin_unlock_irqrestore(&kbd_event_lock, flags); + break; + } + return 0; +} +#undef i +#undef s +#undef v + +/* FIXME: This one needs untangling */ +int vt_do_kdgkb_ioctl(int cmd, struct kbsentry __user *user_kdgkb, int perm) +{ + struct kbsentry *kbs; + u_char *q; + int sz, fnw_sz; + int delta; + char *first_free, *fj, *fnw; + int i, j, k; + int ret; + unsigned long flags; + + if (!capable(CAP_SYS_TTY_CONFIG)) + perm = 0; + + kbs = kmalloc(sizeof(*kbs), GFP_KERNEL); + if (!kbs) { + ret = -ENOMEM; + goto reterr; + } + + /* we mostly copy too much here (512bytes), but who cares ;) */ + if (copy_from_user(kbs, user_kdgkb, sizeof(struct kbsentry))) { + ret = -EFAULT; + goto reterr; + } + kbs->kb_string[sizeof(kbs->kb_string)-1] = '\0'; + i = array_index_nospec(kbs->kb_func, MAX_NR_FUNC); + + switch (cmd) { + case KDGKBSENT: { + /* size should have been a struct member */ + ssize_t len = sizeof(user_kdgkb->kb_string); + + spin_lock_irqsave(&func_buf_lock, flags); + len = strlcpy(kbs->kb_string, func_table[i] ? : "", len); + spin_unlock_irqrestore(&func_buf_lock, flags); + + ret = copy_to_user(user_kdgkb->kb_string, kbs->kb_string, + len + 1) ? -EFAULT : 0; + + goto reterr; + } + case KDSKBSENT: + if (!perm) { + ret = -EPERM; + goto reterr; + } + + fnw = NULL; + fnw_sz = 0; + /* race aginst other writers */ + again: + spin_lock_irqsave(&func_buf_lock, flags); + q = func_table[i]; + + /* fj pointer to next entry after 'q' */ + first_free = funcbufptr + (funcbufsize - funcbufleft); + for (j = i+1; j < MAX_NR_FUNC && !func_table[j]; j++) + ; + if (j < MAX_NR_FUNC) + fj = func_table[j]; + else + fj = first_free; + /* buffer usage increase by new entry */ + delta = (q ? -strlen(q) : 1) + strlen(kbs->kb_string); + + if (delta <= funcbufleft) { /* it fits in current buf */ + if (j < MAX_NR_FUNC) { + /* make enough space for new entry at 'fj' */ + memmove(fj + delta, fj, first_free - fj); + for (k = j; k < MAX_NR_FUNC; k++) + if (func_table[k]) + func_table[k] += delta; + } + if (!q) + func_table[i] = fj; + funcbufleft -= delta; + } else { /* allocate a larger buffer */ + sz = 256; + while (sz < funcbufsize - funcbufleft + delta) + sz <<= 1; + if (fnw_sz != sz) { + spin_unlock_irqrestore(&func_buf_lock, flags); + kfree(fnw); + fnw = kmalloc(sz, GFP_KERNEL); + fnw_sz = sz; + if (!fnw) { + ret = -ENOMEM; + goto reterr; + } + goto again; + } + + if (!q) + func_table[i] = fj; + /* copy data before insertion point to new location */ + if (fj > funcbufptr) + memmove(fnw, funcbufptr, fj - funcbufptr); + for (k = 0; k < j; k++) + if (func_table[k]) + func_table[k] = fnw + (func_table[k] - funcbufptr); + + /* copy data after insertion point to new location */ + if (first_free > fj) { + memmove(fnw + (fj - funcbufptr) + delta, fj, first_free - fj); + for (k = j; k < MAX_NR_FUNC; k++) + if (func_table[k]) + func_table[k] = fnw + (func_table[k] - funcbufptr) + delta; + } + if (funcbufptr != func_buf) + kfree(funcbufptr); + funcbufptr = fnw; + funcbufleft = funcbufleft - delta + sz - funcbufsize; + funcbufsize = sz; + } + /* finally insert item itself */ + strcpy(func_table[i], kbs->kb_string); + spin_unlock_irqrestore(&func_buf_lock, flags); + break; + } + ret = 0; +reterr: + kfree(kbs); + return ret; +} + +int vt_do_kdskled(int console, int cmd, unsigned long arg, int perm) +{ + struct kbd_struct *kb = kbd_table + console; + unsigned long flags; + unsigned char ucval; + + switch(cmd) { + /* the ioctls below read/set the flags usually shown in the leds */ + /* don't use them - they will go away without warning */ + case KDGKBLED: + spin_lock_irqsave(&kbd_event_lock, flags); + ucval = kb->ledflagstate | (kb->default_ledflagstate << 4); + spin_unlock_irqrestore(&kbd_event_lock, flags); + return put_user(ucval, (char __user *)arg); + + case KDSKBLED: + if (!perm) + return -EPERM; + if (arg & ~0x77) + return -EINVAL; + spin_lock_irqsave(&led_lock, flags); + kb->ledflagstate = (arg & 7); + kb->default_ledflagstate = ((arg >> 4) & 7); + set_leds(); + spin_unlock_irqrestore(&led_lock, flags); + return 0; + + /* the ioctls below only set the lights, not the functions */ + /* for those, see KDGKBLED and KDSKBLED above */ + case KDGETLED: + ucval = getledstate(); + return put_user(ucval, (char __user *)arg); + + case KDSETLED: + if (!perm) + return -EPERM; + setledstate(kb, arg); + return 0; + } + return -ENOIOCTLCMD; +} + +int vt_do_kdgkbmode(int console) +{ + struct kbd_struct *kb = kbd_table + console; + /* This is a spot read so needs no locking */ + switch (kb->kbdmode) { + case VC_RAW: + return K_RAW; + case VC_MEDIUMRAW: + return K_MEDIUMRAW; + case VC_UNICODE: + return K_UNICODE; + case VC_OFF: + return K_OFF; + default: + return K_XLATE; + } +} + +/** + * vt_do_kdgkbmeta - report meta status + * @console: console to report + * + * Report the meta flag status of this console + */ +int vt_do_kdgkbmeta(int console) +{ + struct kbd_struct *kb = kbd_table + console; + /* Again a spot read so no locking */ + return vc_kbd_mode(kb, VC_META) ? K_ESCPREFIX : K_METABIT; +} + +/** + * vt_reset_unicode - reset the unicode status + * @console: console being reset + * + * Restore the unicode console state to its default + */ +void vt_reset_unicode(int console) +{ + unsigned long flags; + + spin_lock_irqsave(&kbd_event_lock, flags); + kbd_table[console].kbdmode = default_utf8 ? VC_UNICODE : VC_XLATE; + spin_unlock_irqrestore(&kbd_event_lock, flags); +} + +/** + * vt_get_shiftstate - shift bit state + * + * Report the shift bits from the keyboard state. We have to export + * this to support some oddities in the vt layer. + */ +int vt_get_shift_state(void) +{ + /* Don't lock as this is a transient report */ + return shift_state; +} + +/** + * vt_reset_keyboard - reset keyboard state + * @console: console to reset + * + * Reset the keyboard bits for a console as part of a general console + * reset event + */ +void vt_reset_keyboard(int console) +{ + struct kbd_struct *kb = kbd_table + console; + unsigned long flags; + + spin_lock_irqsave(&kbd_event_lock, flags); + set_vc_kbd_mode(kb, VC_REPEAT); + clr_vc_kbd_mode(kb, VC_CKMODE); + clr_vc_kbd_mode(kb, VC_APPLIC); + clr_vc_kbd_mode(kb, VC_CRLF); + kb->lockstate = 0; + kb->slockstate = 0; + spin_lock(&led_lock); + kb->ledmode = LED_SHOW_FLAGS; + kb->ledflagstate = kb->default_ledflagstate; + spin_unlock(&led_lock); + /* do not do set_leds here because this causes an endless tasklet loop + when the keyboard hasn't been initialized yet */ + spin_unlock_irqrestore(&kbd_event_lock, flags); +} + +/** + * vt_get_kbd_mode_bit - read keyboard status bits + * @console: console to read from + * @bit: mode bit to read + * + * Report back a vt mode bit. We do this without locking so the + * caller must be sure that there are no synchronization needs + */ + +int vt_get_kbd_mode_bit(int console, int bit) +{ + struct kbd_struct *kb = kbd_table + console; + return vc_kbd_mode(kb, bit); +} + +/** + * vt_set_kbd_mode_bit - read keyboard status bits + * @console: console to read from + * @bit: mode bit to read + * + * Set a vt mode bit. We do this without locking so the + * caller must be sure that there are no synchronization needs + */ + +void vt_set_kbd_mode_bit(int console, int bit) +{ + struct kbd_struct *kb = kbd_table + console; + unsigned long flags; + + spin_lock_irqsave(&kbd_event_lock, flags); + set_vc_kbd_mode(kb, bit); + spin_unlock_irqrestore(&kbd_event_lock, flags); +} + +/** + * vt_clr_kbd_mode_bit - read keyboard status bits + * @console: console to read from + * @bit: mode bit to read + * + * Report back a vt mode bit. We do this without locking so the + * caller must be sure that there are no synchronization needs + */ + +void vt_clr_kbd_mode_bit(int console, int bit) +{ + struct kbd_struct *kb = kbd_table + console; + unsigned long flags; + + spin_lock_irqsave(&kbd_event_lock, flags); + clr_vc_kbd_mode(kb, bit); + spin_unlock_irqrestore(&kbd_event_lock, flags); +} diff --git a/drivers/tty/vt/selection.c b/drivers/tty/vt/selection.c new file mode 100644 index 000000000..f245a5acf --- /dev/null +++ b/drivers/tty/vt/selection.c @@ -0,0 +1,420 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * This module exports the functions: + * + * 'int set_selection_user(struct tiocl_selection __user *, + * struct tty_struct *)' + * 'int set_selection_kernel(struct tiocl_selection *, struct tty_struct *)' + * 'void clear_selection(void)' + * 'int paste_selection(struct tty_struct *)' + * 'int sel_loadlut(char __user *)' + * + * Now that /dev/vcs exists, most of this can disappear again. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include +#include +#include +#include +#include + +#include + +/* Don't take this from : 011-015 on the screen aren't spaces */ +#define isspace(c) ((c) == ' ') + +/* FIXME: all this needs locking */ +static struct vc_selection { + struct mutex lock; + struct vc_data *cons; /* must not be deallocated */ + char *buffer; + unsigned int buf_len; + volatile int start; /* cleared by clear_selection */ + int end; +} vc_sel = { + .lock = __MUTEX_INITIALIZER(vc_sel.lock), + .start = -1, +}; + +/* clear_selection, highlight and highlight_pointer can be called + from interrupt (via scrollback/front) */ + +/* set reverse video on characters s-e of console with selection. */ +static inline void highlight(const int s, const int e) +{ + invert_screen(vc_sel.cons, s, e-s+2, true); +} + +/* use complementary color to show the pointer */ +static inline void highlight_pointer(const int where) +{ + complement_pos(vc_sel.cons, where); +} + +static u32 +sel_pos(int n, bool unicode) +{ + if (unicode) + return screen_glyph_unicode(vc_sel.cons, n / 2); + return inverse_translate(vc_sel.cons, screen_glyph(vc_sel.cons, n), 0); +} + +/** + * clear_selection - remove current selection + * + * Remove the current selection highlight, if any from the console + * holding the selection. The caller must hold the console lock. + */ +void clear_selection(void) +{ + highlight_pointer(-1); /* hide the pointer */ + if (vc_sel.start != -1) { + highlight(vc_sel.start, vc_sel.end); + vc_sel.start = -1; + } +} +EXPORT_SYMBOL_GPL(clear_selection); + +bool vc_is_sel(struct vc_data *vc) +{ + return vc == vc_sel.cons; +} + +/* + * User settable table: what characters are to be considered alphabetic? + * 128 bits. Locked by the console lock. + */ +static u32 inwordLut[]={ + 0x00000000, /* control chars */ + 0x03FFE000, /* digits and "-./" */ + 0x87FFFFFE, /* uppercase and '_' */ + 0x07FFFFFE, /* lowercase */ +}; + +static inline int inword(const u32 c) +{ + return c > 0x7f || (( inwordLut[c>>5] >> (c & 0x1F) ) & 1); +} + +/** + * set loadlut - load the LUT table + * @p: user table + * + * Load the LUT table from user space. The caller must hold the console + * lock. Make a temporary copy so a partial update doesn't make a mess. + */ +int sel_loadlut(char __user *p) +{ + u32 tmplut[ARRAY_SIZE(inwordLut)]; + if (copy_from_user(tmplut, (u32 __user *)(p+4), sizeof(inwordLut))) + return -EFAULT; + memcpy(inwordLut, tmplut, sizeof(inwordLut)); + return 0; +} + +/* does screen address p correspond to character at LH/RH edge of screen? */ +static inline int atedge(const int p, int size_row) +{ + return (!(p % size_row) || !((p + 2) % size_row)); +} + +/* stores the char in UTF8 and returns the number of bytes used (1-4) */ +static int store_utf8(u32 c, char *p) +{ + if (c < 0x80) { + /* 0******* */ + p[0] = c; + return 1; + } else if (c < 0x800) { + /* 110***** 10****** */ + p[0] = 0xc0 | (c >> 6); + p[1] = 0x80 | (c & 0x3f); + return 2; + } else if (c < 0x10000) { + /* 1110**** 10****** 10****** */ + p[0] = 0xe0 | (c >> 12); + p[1] = 0x80 | ((c >> 6) & 0x3f); + p[2] = 0x80 | (c & 0x3f); + return 3; + } else if (c < 0x110000) { + /* 11110*** 10****** 10****** 10****** */ + p[0] = 0xf0 | (c >> 18); + p[1] = 0x80 | ((c >> 12) & 0x3f); + p[2] = 0x80 | ((c >> 6) & 0x3f); + p[3] = 0x80 | (c & 0x3f); + return 4; + } else { + /* outside Unicode, replace with U+FFFD */ + p[0] = 0xef; + p[1] = 0xbf; + p[2] = 0xbd; + return 3; + } +} + +/** + * set_selection_user - set the current selection. + * @sel: user selection info + * @tty: the console tty + * + * Invoked by the ioctl handle for the vt layer. + * + * The entire selection process is managed under the console_lock. It's + * a lot under the lock but its hardly a performance path + */ +int set_selection_user(const struct tiocl_selection __user *sel, + struct tty_struct *tty) +{ + struct tiocl_selection v; + + if (copy_from_user(&v, sel, sizeof(*sel))) + return -EFAULT; + + return set_selection_kernel(&v, tty); +} + +static int vc_selection_store_chars(struct vc_data *vc, bool unicode) +{ + char *bp, *obp; + unsigned int i; + + /* Allocate a new buffer before freeing the old one ... */ + /* chars can take up to 4 bytes with unicode */ + bp = kmalloc_array((vc_sel.end - vc_sel.start) / 2 + 1, unicode ? 4 : 1, + GFP_KERNEL | __GFP_NOWARN); + if (!bp) { + printk(KERN_WARNING "selection: kmalloc() failed\n"); + clear_selection(); + return -ENOMEM; + } + kfree(vc_sel.buffer); + vc_sel.buffer = bp; + + obp = bp; + for (i = vc_sel.start; i <= vc_sel.end; i += 2) { + u32 c = sel_pos(i, unicode); + if (unicode) + bp += store_utf8(c, bp); + else + *bp++ = c; + if (!isspace(c)) + obp = bp; + if (!((i + 2) % vc->vc_size_row)) { + /* strip trailing blanks from line and add newline, + unless non-space at end of line. */ + if (obp != bp) { + bp = obp; + *bp++ = '\r'; + } + obp = bp; + } + } + vc_sel.buf_len = bp - vc_sel.buffer; + + return 0; +} + +static int vc_do_selection(struct vc_data *vc, unsigned short mode, int ps, + int pe) +{ + int new_sel_start, new_sel_end, spc; + bool unicode = vt_do_kdgkbmode(fg_console) == K_UNICODE; + + switch (mode) { + case TIOCL_SELCHAR: /* character-by-character selection */ + new_sel_start = ps; + new_sel_end = pe; + break; + case TIOCL_SELWORD: /* word-by-word selection */ + spc = isspace(sel_pos(ps, unicode)); + for (new_sel_start = ps; ; ps -= 2) { + if ((spc && !isspace(sel_pos(ps, unicode))) || + (!spc && !inword(sel_pos(ps, unicode)))) + break; + new_sel_start = ps; + if (!(ps % vc->vc_size_row)) + break; + } + + spc = isspace(sel_pos(pe, unicode)); + for (new_sel_end = pe; ; pe += 2) { + if ((spc && !isspace(sel_pos(pe, unicode))) || + (!spc && !inword(sel_pos(pe, unicode)))) + break; + new_sel_end = pe; + if (!((pe + 2) % vc->vc_size_row)) + break; + } + break; + case TIOCL_SELLINE: /* line-by-line selection */ + new_sel_start = rounddown(ps, vc->vc_size_row); + new_sel_end = rounddown(pe, vc->vc_size_row) + + vc->vc_size_row - 2; + break; + case TIOCL_SELPOINTER: + highlight_pointer(pe); + return 0; + default: + return -EINVAL; + } + + /* remove the pointer */ + highlight_pointer(-1); + + /* select to end of line if on trailing space */ + if (new_sel_end > new_sel_start && + !atedge(new_sel_end, vc->vc_size_row) && + isspace(sel_pos(new_sel_end, unicode))) { + for (pe = new_sel_end + 2; ; pe += 2) + if (!isspace(sel_pos(pe, unicode)) || + atedge(pe, vc->vc_size_row)) + break; + if (isspace(sel_pos(pe, unicode))) + new_sel_end = pe; + } + if (vc_sel.start == -1) /* no current selection */ + highlight(new_sel_start, new_sel_end); + else if (new_sel_start == vc_sel.start) + { + if (new_sel_end == vc_sel.end) /* no action required */ + return 0; + else if (new_sel_end > vc_sel.end) /* extend to right */ + highlight(vc_sel.end + 2, new_sel_end); + else /* contract from right */ + highlight(new_sel_end + 2, vc_sel.end); + } + else if (new_sel_end == vc_sel.end) + { + if (new_sel_start < vc_sel.start) /* extend to left */ + highlight(new_sel_start, vc_sel.start - 2); + else /* contract from left */ + highlight(vc_sel.start, new_sel_start - 2); + } + else /* some other case; start selection from scratch */ + { + clear_selection(); + highlight(new_sel_start, new_sel_end); + } + vc_sel.start = new_sel_start; + vc_sel.end = new_sel_end; + + return vc_selection_store_chars(vc, unicode); +} + +static int vc_selection(struct vc_data *vc, struct tiocl_selection *v, + struct tty_struct *tty) +{ + int ps, pe; + + poke_blanked_console(); + + if (v->sel_mode == TIOCL_SELCLEAR) { + /* useful for screendump without selection highlights */ + clear_selection(); + return 0; + } + + v->xs = min_t(u16, v->xs - 1, vc->vc_cols - 1); + v->ys = min_t(u16, v->ys - 1, vc->vc_rows - 1); + v->xe = min_t(u16, v->xe - 1, vc->vc_cols - 1); + v->ye = min_t(u16, v->ye - 1, vc->vc_rows - 1); + + if (mouse_reporting() && (v->sel_mode & TIOCL_SELMOUSEREPORT)) { + mouse_report(tty, v->sel_mode & TIOCL_SELBUTTONMASK, v->xs, + v->ys); + return 0; + } + + ps = v->ys * vc->vc_size_row + (v->xs << 1); + pe = v->ye * vc->vc_size_row + (v->xe << 1); + if (ps > pe) /* make vc_sel.start <= vc_sel.end */ + swap(ps, pe); + + if (vc_sel.cons != vc) { + clear_selection(); + vc_sel.cons = vc; + } + + return vc_do_selection(vc, v->sel_mode, ps, pe); +} + +int set_selection_kernel(struct tiocl_selection *v, struct tty_struct *tty) +{ + int ret; + + mutex_lock(&vc_sel.lock); + console_lock(); + ret = vc_selection(vc_cons[fg_console].d, v, tty); + console_unlock(); + mutex_unlock(&vc_sel.lock); + + return ret; +} +EXPORT_SYMBOL_GPL(set_selection_kernel); + +/* Insert the contents of the selection buffer into the + * queue of the tty associated with the current console. + * Invoked by ioctl(). + * + * Locking: called without locks. Calls the ldisc wrongly with + * unsafe methods, + */ +int paste_selection(struct tty_struct *tty) +{ + struct vc_data *vc = tty->driver_data; + int pasted = 0; + unsigned int count; + struct tty_ldisc *ld; + DECLARE_WAITQUEUE(wait, current); + int ret = 0; + + console_lock(); + poke_blanked_console(); + console_unlock(); + + ld = tty_ldisc_ref_wait(tty); + if (!ld) + return -EIO; /* ldisc was hung up */ + tty_buffer_lock_exclusive(&vc->port); + + add_wait_queue(&vc->paste_wait, &wait); + mutex_lock(&vc_sel.lock); + while (vc_sel.buffer && vc_sel.buf_len > pasted) { + set_current_state(TASK_INTERRUPTIBLE); + if (signal_pending(current)) { + ret = -EINTR; + break; + } + if (tty_throttled(tty)) { + mutex_unlock(&vc_sel.lock); + schedule(); + mutex_lock(&vc_sel.lock); + continue; + } + __set_current_state(TASK_RUNNING); + count = vc_sel.buf_len - pasted; + count = tty_ldisc_receive_buf(ld, vc_sel.buffer + pasted, NULL, + count); + pasted += count; + } + mutex_unlock(&vc_sel.lock); + remove_wait_queue(&vc->paste_wait, &wait); + __set_current_state(TASK_RUNNING); + + tty_buffer_unlock_exclusive(&vc->port); + tty_ldisc_deref(ld); + return ret; +} +EXPORT_SYMBOL_GPL(paste_selection); diff --git a/drivers/tty/vt/vc_screen.c b/drivers/tty/vt/vc_screen.c new file mode 100644 index 000000000..01c96537f --- /dev/null +++ b/drivers/tty/vt/vc_screen.c @@ -0,0 +1,822 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Provide access to virtual console memory. + * /dev/vcs: the screen as it is being viewed right now (possibly scrolled) + * /dev/vcsN: the screen of /dev/ttyN (1 <= N <= 63) + * [minor: N] + * + * /dev/vcsaN: idem, but including attributes, and prefixed with + * the 4 bytes lines,columns,x,y (as screendump used to give). + * Attribute/character pair is in native endianity. + * [minor: N+128] + * + * /dev/vcsuN: similar to /dev/vcsaN but using 4-byte unicode values + * instead of 1-byte screen glyph values. + * [minor: N+64] + * + * /dev/vcsuaN: same idea as /dev/vcsaN for unicode (not yet implemented). + * + * This replaces screendump and part of selection, so that the system + * administrator can control access using file system permissions. + * + * aeb@cwi.nl - efter Friedas begravelse - 950211 + * + * machek@k332.feld.cvut.cz - modified not to send characters to wrong console + * - fixed some fatal off-by-one bugs (0-- no longer == -1 -> looping and looping and looping...) + * - making it shorter - scr_readw are macros which expand in PRETTY long code + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define HEADER_SIZE 4u +#define CON_BUF_SIZE (CONFIG_BASE_SMALL ? 256 : PAGE_SIZE) + +/* + * Our minor space: + * + * 0 ... 63 glyph mode without attributes + * 64 ... 127 unicode mode without attributes + * 128 ... 191 glyph mode with attributes + * 192 ... 255 unused (reserved for unicode with attributes) + * + * This relies on MAX_NR_CONSOLES being <= 63, meaning 63 actual consoles + * with minors 0, 64, 128 and 192 being proxies for the foreground console. + */ +#if MAX_NR_CONSOLES > 63 +#warning "/dev/vcs* devices may not accommodate more than 63 consoles" +#endif + +#define console(inode) (iminor(inode) & 63) +#define use_unicode(inode) (iminor(inode) & 64) +#define use_attributes(inode) (iminor(inode) & 128) + + +struct vcs_poll_data { + struct notifier_block notifier; + unsigned int cons_num; + int event; + wait_queue_head_t waitq; + struct fasync_struct *fasync; +}; + +static int +vcs_notifier(struct notifier_block *nb, unsigned long code, void *_param) +{ + struct vt_notifier_param *param = _param; + struct vc_data *vc = param->vc; + struct vcs_poll_data *poll = + container_of(nb, struct vcs_poll_data, notifier); + int currcons = poll->cons_num; + int fa_band; + + switch (code) { + case VT_UPDATE: + fa_band = POLL_PRI; + break; + case VT_DEALLOCATE: + fa_band = POLL_HUP; + break; + default: + return NOTIFY_DONE; + } + + if (currcons == 0) + currcons = fg_console; + else + currcons--; + if (currcons != vc->vc_num) + return NOTIFY_DONE; + + poll->event = code; + wake_up_interruptible(&poll->waitq); + kill_fasync(&poll->fasync, SIGIO, fa_band); + return NOTIFY_OK; +} + +static void +vcs_poll_data_free(struct vcs_poll_data *poll) +{ + unregister_vt_notifier(&poll->notifier); + kfree(poll); +} + +static struct vcs_poll_data * +vcs_poll_data_get(struct file *file) +{ + struct vcs_poll_data *poll = file->private_data, *kill = NULL; + + if (poll) + return poll; + + poll = kzalloc(sizeof(*poll), GFP_KERNEL); + if (!poll) + return NULL; + poll->cons_num = console(file_inode(file)); + init_waitqueue_head(&poll->waitq); + poll->notifier.notifier_call = vcs_notifier; + /* + * In order not to lose any update event, we must pretend one might + * have occurred before we have a chance to register our notifier. + * This is also how user space has come to detect which kernels + * support POLLPRI on /dev/vcs* devices i.e. using poll() with + * POLLPRI and a zero timeout. + */ + poll->event = VT_UPDATE; + + if (register_vt_notifier(&poll->notifier) != 0) { + kfree(poll); + return NULL; + } + + /* + * This code may be called either through ->poll() or ->fasync(). + * If we have two threads using the same file descriptor, they could + * both enter this function, both notice that the structure hasn't + * been allocated yet and go ahead allocating it in parallel, but + * only one of them must survive and be shared otherwise we'd leak + * memory with a dangling notifier callback. + */ + spin_lock(&file->f_lock); + if (!file->private_data) { + file->private_data = poll; + } else { + /* someone else raced ahead of us */ + kill = poll; + poll = file->private_data; + } + spin_unlock(&file->f_lock); + if (kill) + vcs_poll_data_free(kill); + + return poll; +} + +/** + * vcs_vc -- return VC for @inode + * @inode: inode for which to return a VC + * @viewed: returns whether this console is currently foreground (viewed) + * + * Must be called with console_lock. + */ +static struct vc_data *vcs_vc(struct inode *inode, bool *viewed) +{ + unsigned int currcons = console(inode); + + WARN_CONSOLE_UNLOCKED(); + + if (currcons == 0) { + currcons = fg_console; + if (viewed) + *viewed = true; + } else { + currcons--; + if (viewed) + *viewed = false; + } + return vc_cons[currcons].d; +} + +/** + * vcs_size -- return size for a VC in @vc + * @vc: which VC + * @attr: does it use attributes? + * @unicode: is it unicode? + * + * Must be called with console_lock. + */ +static int vcs_size(const struct vc_data *vc, bool attr, bool unicode) +{ + int size; + + WARN_CONSOLE_UNLOCKED(); + + size = vc->vc_rows * vc->vc_cols; + + if (attr) { + if (unicode) + return -EOPNOTSUPP; + + size = 2 * size + HEADER_SIZE; + } else if (unicode) + size *= 4; + + return size; +} + +static loff_t vcs_lseek(struct file *file, loff_t offset, int orig) +{ + struct inode *inode = file_inode(file); + struct vc_data *vc; + int size; + + console_lock(); + vc = vcs_vc(inode, NULL); + if (!vc) { + console_unlock(); + return -ENXIO; + } + + size = vcs_size(vc, use_attributes(inode), use_unicode(inode)); + console_unlock(); + if (size < 0) + return size; + return fixed_size_llseek(file, offset, orig, size); +} + +static int vcs_read_buf_uni(struct vc_data *vc, char *con_buf, + unsigned int pos, unsigned int count, bool viewed) +{ + unsigned int nr, row, col, maxcol = vc->vc_cols; + int ret; + + ret = vc_uniscr_check(vc); + if (ret) + return ret; + + pos /= 4; + row = pos / maxcol; + col = pos % maxcol; + nr = maxcol - col; + do { + if (nr > count / 4) + nr = count / 4; + vc_uniscr_copy_line(vc, con_buf, viewed, row, col, nr); + con_buf += nr * 4; + count -= nr * 4; + row++; + col = 0; + nr = maxcol; + } while (count); + + return 0; +} + +static void vcs_read_buf_noattr(const struct vc_data *vc, char *con_buf, + unsigned int pos, unsigned int count, bool viewed) +{ + u16 *org; + unsigned int col, maxcol = vc->vc_cols; + + org = screen_pos(vc, pos, viewed); + col = pos % maxcol; + pos += maxcol - col; + + while (count-- > 0) { + *con_buf++ = (vcs_scr_readw(vc, org++) & 0xff); + if (++col == maxcol) { + org = screen_pos(vc, pos, viewed); + col = 0; + pos += maxcol; + } + } +} + +static unsigned int vcs_read_buf(const struct vc_data *vc, char *con_buf, + unsigned int pos, unsigned int count, bool viewed, + unsigned int *skip) +{ + u16 *org, *con_buf16; + unsigned int col, maxcol = vc->vc_cols; + unsigned int filled = count; + + if (pos < HEADER_SIZE) { + /* clamp header values if they don't fit */ + con_buf[0] = min(vc->vc_rows, 0xFFu); + con_buf[1] = min(vc->vc_cols, 0xFFu); + getconsxy(vc, con_buf + 2); + + *skip += pos; + count += pos; + if (count > CON_BUF_SIZE) { + count = CON_BUF_SIZE; + filled = count - pos; + } + + /* Advance state pointers and move on. */ + count -= min(HEADER_SIZE, count); + pos = HEADER_SIZE; + con_buf += HEADER_SIZE; + /* If count >= 0, then pos is even... */ + } else if (pos & 1) { + /* + * Skip first byte for output if start address is odd. Update + * region sizes up/down depending on free space in buffer. + */ + (*skip)++; + if (count < CON_BUF_SIZE) + count++; + else + filled--; + } + + if (!count) + return filled; + + pos -= HEADER_SIZE; + pos /= 2; + col = pos % maxcol; + + org = screen_pos(vc, pos, viewed); + pos += maxcol - col; + + /* + * Buffer has even length, so we can always copy character + attribute. + * We do not copy last byte to userspace if count is odd. + */ + count = (count + 1) / 2; + con_buf16 = (u16 *)con_buf; + + while (count) { + *con_buf16++ = vcs_scr_readw(vc, org++); + count--; + if (++col == maxcol) { + org = screen_pos(vc, pos, viewed); + col = 0; + pos += maxcol; + } + } + + return filled; +} + +static ssize_t +vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) +{ + struct inode *inode = file_inode(file); + struct vc_data *vc; + struct vcs_poll_data *poll; + unsigned int read; + ssize_t ret; + char *con_buf; + loff_t pos; + bool viewed, attr, uni_mode; + + con_buf = (char *) __get_free_page(GFP_KERNEL); + if (!con_buf) + return -ENOMEM; + + pos = *ppos; + + /* Select the proper current console and verify + * sanity of the situation under the console lock. + */ + console_lock(); + + uni_mode = use_unicode(inode); + attr = use_attributes(inode); + + ret = -EINVAL; + if (pos < 0) + goto unlock_out; + /* we enforce 32-bit alignment for pos and count in unicode mode */ + if (uni_mode && (pos | count) & 3) + goto unlock_out; + + poll = file->private_data; + if (count && poll) + poll->event = 0; + read = 0; + ret = 0; + while (count) { + unsigned int this_round, skip = 0; + int size; + + vc = vcs_vc(inode, &viewed); + if (!vc) { + ret = -ENXIO; + break; + } + + /* Check whether we are above size each round, + * as copy_to_user at the end of this loop + * could sleep. + */ + size = vcs_size(vc, attr, uni_mode); + if (size < 0) { + ret = size; + break; + } + if (pos >= size) + break; + if (count > size - pos) + count = size - pos; + + this_round = count; + if (this_round > CON_BUF_SIZE) + this_round = CON_BUF_SIZE; + + /* Perform the whole read into the local con_buf. + * Then we can drop the console spinlock and safely + * attempt to move it to userspace. + */ + + if (uni_mode) { + ret = vcs_read_buf_uni(vc, con_buf, pos, this_round, + viewed); + if (ret) + break; + } else if (!attr) { + vcs_read_buf_noattr(vc, con_buf, pos, this_round, + viewed); + } else { + this_round = vcs_read_buf(vc, con_buf, pos, this_round, + viewed, &skip); + } + + /* Finally, release the console semaphore while we push + * all the data to userspace from our temporary buffer. + * + * AKPM: Even though it's a semaphore, we should drop it because + * the pagefault handling code may want to call printk(). + */ + + console_unlock(); + ret = copy_to_user(buf, con_buf + skip, this_round); + console_lock(); + + if (ret) { + read += this_round - ret; + ret = -EFAULT; + break; + } + buf += this_round; + pos += this_round; + read += this_round; + count -= this_round; + } + *ppos += read; + if (read) + ret = read; +unlock_out: + console_unlock(); + free_page((unsigned long) con_buf); + return ret; +} + +static u16 *vcs_write_buf_noattr(struct vc_data *vc, const char *con_buf, + unsigned int pos, unsigned int count, bool viewed, u16 **org0) +{ + u16 *org; + unsigned int col, maxcol = vc->vc_cols; + + *org0 = org = screen_pos(vc, pos, viewed); + col = pos % maxcol; + pos += maxcol - col; + + while (count > 0) { + unsigned char c = *con_buf++; + + count--; + vcs_scr_writew(vc, + (vcs_scr_readw(vc, org) & 0xff00) | c, org); + org++; + if (++col == maxcol) { + org = screen_pos(vc, pos, viewed); + col = 0; + pos += maxcol; + } + } + + return org; +} + +/* + * Compilers (gcc 10) are unable to optimize the swap in cpu_to_le16. So do it + * the poor man way. + */ +static inline u16 vc_compile_le16(u8 hi, u8 lo) +{ +#ifdef __BIG_ENDIAN + return (lo << 8u) | hi; +#else + return (hi << 8u) | lo; +#endif +} + +static u16 *vcs_write_buf(struct vc_data *vc, const char *con_buf, + unsigned int pos, unsigned int count, bool viewed, u16 **org0) +{ + u16 *org; + unsigned int col, maxcol = vc->vc_cols; + unsigned char c; + + /* header */ + if (pos < HEADER_SIZE) { + char header[HEADER_SIZE]; + + getconsxy(vc, header + 2); + while (pos < HEADER_SIZE && count > 0) { + count--; + header[pos++] = *con_buf++; + } + if (!viewed) + putconsxy(vc, header + 2); + } + + if (!count) + return NULL; + + pos -= HEADER_SIZE; + col = (pos/2) % maxcol; + + *org0 = org = screen_pos(vc, pos/2, viewed); + + /* odd pos -- the first single character */ + if (pos & 1) { + count--; + c = *con_buf++; + vcs_scr_writew(vc, vc_compile_le16(c, vcs_scr_readw(vc, org)), + org); + org++; + pos++; + if (++col == maxcol) { + org = screen_pos(vc, pos/2, viewed); + col = 0; + } + } + + pos /= 2; + pos += maxcol - col; + + /* even pos -- handle attr+character pairs */ + while (count > 1) { + unsigned short w; + + w = get_unaligned(((unsigned short *)con_buf)); + vcs_scr_writew(vc, w, org++); + con_buf += 2; + count -= 2; + if (++col == maxcol) { + org = screen_pos(vc, pos, viewed); + col = 0; + pos += maxcol; + } + } + + if (!count) + return org; + + /* odd pos -- the remaining character */ + c = *con_buf++; + vcs_scr_writew(vc, vc_compile_le16(vcs_scr_readw(vc, org) >> 8, c), + org); + + return org; +} + +static ssize_t +vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) +{ + struct inode *inode = file_inode(file); + struct vc_data *vc; + char *con_buf; + u16 *org0, *org; + unsigned int written; + int size; + ssize_t ret; + loff_t pos; + bool viewed, attr; + + if (use_unicode(inode)) + return -EOPNOTSUPP; + + con_buf = (char *) __get_free_page(GFP_KERNEL); + if (!con_buf) + return -ENOMEM; + + pos = *ppos; + + /* Select the proper current console and verify + * sanity of the situation under the console lock. + */ + console_lock(); + + attr = use_attributes(inode); + ret = -ENXIO; + vc = vcs_vc(inode, &viewed); + if (!vc) + goto unlock_out; + + size = vcs_size(vc, attr, false); + if (size < 0) { + ret = size; + goto unlock_out; + } + ret = -EINVAL; + if (pos < 0 || pos > size) + goto unlock_out; + if (count > size - pos) + count = size - pos; + written = 0; + while (count) { + unsigned int this_round = count; + + if (this_round > CON_BUF_SIZE) + this_round = CON_BUF_SIZE; + + /* Temporarily drop the console lock so that we can read + * in the write data from userspace safely. + */ + console_unlock(); + ret = copy_from_user(con_buf, buf, this_round); + console_lock(); + + if (ret) { + this_round -= ret; + if (!this_round) { + /* Abort loop if no data were copied. Otherwise + * fail with -EFAULT. + */ + if (written) + break; + ret = -EFAULT; + goto unlock_out; + } + } + + /* The vc might have been freed or vcs_size might have changed + * while we slept to grab the user buffer, so recheck. + * Return data written up to now on failure. + */ + vc = vcs_vc(inode, &viewed); + if (!vc) { + if (written) + break; + ret = -ENXIO; + goto unlock_out; + } + size = vcs_size(vc, attr, false); + if (size < 0) { + if (written) + break; + ret = size; + goto unlock_out; + } + if (pos >= size) + break; + if (this_round > size - pos) + this_round = size - pos; + + /* OK, now actually push the write to the console + * under the lock using the local kernel buffer. + */ + + if (attr) + org = vcs_write_buf(vc, con_buf, pos, this_round, + viewed, &org0); + else + org = vcs_write_buf_noattr(vc, con_buf, pos, this_round, + viewed, &org0); + + count -= this_round; + written += this_round; + buf += this_round; + pos += this_round; + if (org) + update_region(vc, (unsigned long)(org0), org - org0); + } + *ppos += written; + ret = written; + if (written) + vcs_scr_updated(vc); + +unlock_out: + console_unlock(); + free_page((unsigned long) con_buf); + return ret; +} + +static __poll_t +vcs_poll(struct file *file, poll_table *wait) +{ + struct vcs_poll_data *poll = vcs_poll_data_get(file); + __poll_t ret = DEFAULT_POLLMASK|EPOLLERR; + + if (poll) { + poll_wait(file, &poll->waitq, wait); + switch (poll->event) { + case VT_UPDATE: + ret = DEFAULT_POLLMASK|EPOLLPRI; + break; + case VT_DEALLOCATE: + ret = DEFAULT_POLLMASK|EPOLLHUP|EPOLLERR; + break; + case 0: + ret = DEFAULT_POLLMASK; + break; + } + } + return ret; +} + +static int +vcs_fasync(int fd, struct file *file, int on) +{ + struct vcs_poll_data *poll = file->private_data; + + if (!poll) { + /* don't allocate anything if all we want is disable fasync */ + if (!on) + return 0; + poll = vcs_poll_data_get(file); + if (!poll) + return -ENOMEM; + } + + return fasync_helper(fd, file, on, &poll->fasync); +} + +static int +vcs_open(struct inode *inode, struct file *filp) +{ + unsigned int currcons = console(inode); + bool attr = use_attributes(inode); + bool uni_mode = use_unicode(inode); + int ret = 0; + + /* we currently don't support attributes in unicode mode */ + if (attr && uni_mode) + return -EOPNOTSUPP; + + console_lock(); + if(currcons && !vc_cons_allocated(currcons-1)) + ret = -ENXIO; + console_unlock(); + return ret; +} + +static int vcs_release(struct inode *inode, struct file *file) +{ + struct vcs_poll_data *poll = file->private_data; + + if (poll) + vcs_poll_data_free(poll); + return 0; +} + +static const struct file_operations vcs_fops = { + .llseek = vcs_lseek, + .read = vcs_read, + .write = vcs_write, + .poll = vcs_poll, + .fasync = vcs_fasync, + .open = vcs_open, + .release = vcs_release, +}; + +static struct class *vc_class; + +void vcs_make_sysfs(int index) +{ + device_create(vc_class, NULL, MKDEV(VCS_MAJOR, index + 1), NULL, + "vcs%u", index + 1); + device_create(vc_class, NULL, MKDEV(VCS_MAJOR, index + 65), NULL, + "vcsu%u", index + 1); + device_create(vc_class, NULL, MKDEV(VCS_MAJOR, index + 129), NULL, + "vcsa%u", index + 1); +} + +void vcs_remove_sysfs(int index) +{ + device_destroy(vc_class, MKDEV(VCS_MAJOR, index + 1)); + device_destroy(vc_class, MKDEV(VCS_MAJOR, index + 65)); + device_destroy(vc_class, MKDEV(VCS_MAJOR, index + 129)); +} + +int __init vcs_init(void) +{ + unsigned int i; + + if (register_chrdev(VCS_MAJOR, "vcs", &vcs_fops)) + panic("unable to get major %d for vcs device", VCS_MAJOR); + vc_class = class_create(THIS_MODULE, "vc"); + + device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 0), NULL, "vcs"); + device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 64), NULL, "vcsu"); + device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 128), NULL, "vcsa"); + for (i = 0; i < MIN_NR_CONSOLES; i++) + vcs_make_sysfs(i); + return 0; +} diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c new file mode 100644 index 000000000..0252c0562 --- /dev/null +++ b/drivers/tty/vt/vt.c @@ -0,0 +1,4861 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 1991, 1992 Linus Torvalds + */ + +/* + * Hopefully this will be a rather complete VT102 implementation. + * + * Beeping thanks to John T Kohl. + * + * Virtual Consoles, Screen Blanking, Screen Dumping, Color, Graphics + * Chars, and VT100 enhancements by Peter MacDonald. + * + * Copy and paste function by Andrew Haylett, + * some enhancements by Alessandro Rubini. + * + * Code to check for different video-cards mostly by Galen Hunt, + * + * + * Rudimentary ISO 10646/Unicode/UTF-8 character set support by + * Markus Kuhn, . + * + * Dynamic allocation of consoles, aeb@cwi.nl, May 1994 + * Resizing of consoles, aeb, 940926 + * + * Code for xterm like mouse click reporting by Peter Orbaek 20-Jul-94 + * + * + * User-defined bell sound, new setterm control sequences and printk + * redirection by Martin Mares 19-Nov-95 + * + * APM screenblank bug fixed Takashi Manabe + * + * Merge with the abstract console driver by Geert Uytterhoeven + * , Jan 1997. + * + * Original m68k console driver modifications by + * + * - Arno Griffioen + * - David Carter + * + * The abstract console driver provides a generic interface for a text + * console. It supports VGA text mode, frame buffer based graphical consoles + * and special graphics processors that are only accessible through some + * registers (e.g. a TMS340x0 GSP). + * + * The interface to the hardware is specified using a special structure + * (struct consw) which contains function pointers to console operations + * (see for more information). + * + * Support for changeable cursor shape + * by Pavel Machek , August 1997 + * + * Ported to i386 and con_scrolldelta fixed + * by Emmanuel Marty , April 1998 + * + * Resurrected character buffers in videoram plus lots of other trickery + * by Martin Mares , July 1998 + * + * Removed old-style timers, introduced console_timer, made timer + * deletion SMP-safe. 17Jun00, Andrew Morton + * + * Removed console_lock, enabled interrupts across all console operations + * 13 March 2001, Andrew Morton + * + * Fixed UTF-8 mode so alternate charset modes always work according + * to control sequences interpreted in do_con_trol function + * preserving backward VT100 semigraphics compatibility, + * malformed UTF sequences represented as sequences of replacement glyphs, + * original codes or '?' as a last resort if replacement glyph is undefined + * by Adam Tla/lka , Aug 2006 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MAX_NR_CON_DRIVER 16 + +#define CON_DRIVER_FLAG_MODULE 1 +#define CON_DRIVER_FLAG_INIT 2 +#define CON_DRIVER_FLAG_ATTR 4 +#define CON_DRIVER_FLAG_ZOMBIE 8 + +struct con_driver { + const struct consw *con; + const char *desc; + struct device *dev; + int node; + int first; + int last; + int flag; +}; + +static struct con_driver registered_con_driver[MAX_NR_CON_DRIVER]; +const struct consw *conswitchp; + +/* + * Here is the default bell parameters: 750HZ, 1/8th of a second + */ +#define DEFAULT_BELL_PITCH 750 +#define DEFAULT_BELL_DURATION (HZ/8) +#define DEFAULT_CURSOR_BLINK_MS 200 + +struct vc vc_cons [MAX_NR_CONSOLES]; + +#ifndef VT_SINGLE_DRIVER +static const struct consw *con_driver_map[MAX_NR_CONSOLES]; +#endif + +static int con_open(struct tty_struct *, struct file *); +static void vc_init(struct vc_data *vc, unsigned int rows, + unsigned int cols, int do_clear); +static void gotoxy(struct vc_data *vc, int new_x, int new_y); +static void save_cur(struct vc_data *vc); +static void reset_terminal(struct vc_data *vc, int do_clear); +static void con_flush_chars(struct tty_struct *tty); +static int set_vesa_blanking(char __user *p); +static void set_cursor(struct vc_data *vc); +static void hide_cursor(struct vc_data *vc); +static void console_callback(struct work_struct *ignored); +static void con_driver_unregister_callback(struct work_struct *ignored); +static void blank_screen_t(struct timer_list *unused); +static void set_palette(struct vc_data *vc); + +#define vt_get_kmsg_redirect() vt_kmsg_redirect(-1) + +static int printable; /* Is console ready for printing? */ +int default_utf8 = true; +module_param(default_utf8, int, S_IRUGO | S_IWUSR); +int global_cursor_default = -1; +module_param(global_cursor_default, int, S_IRUGO | S_IWUSR); + +static int cur_default = CUR_UNDERLINE; +module_param(cur_default, int, S_IRUGO | S_IWUSR); + +/* + * ignore_poke: don't unblank the screen when things are typed. This is + * mainly for the privacy of braille terminal users. + */ +static int ignore_poke; + +int do_poke_blanked_console; +int console_blanked; + +static int vesa_blank_mode; /* 0:none 1:suspendV 2:suspendH 3:powerdown */ +static int vesa_off_interval; +static int blankinterval; +core_param(consoleblank, blankinterval, int, 0444); + +static DECLARE_WORK(console_work, console_callback); +static DECLARE_WORK(con_driver_unregister_work, con_driver_unregister_callback); + +/* + * fg_console is the current virtual console, + * last_console is the last used one, + * want_console is the console we want to switch to, + * saved_* variants are for save/restore around kernel debugger enter/leave + */ +int fg_console; +int last_console; +int want_console = -1; +static int saved_fg_console; +static int saved_last_console; +static int saved_want_console; +static int saved_vc_mode; +static int saved_console_blanked; + +/* + * For each existing display, we have a pointer to console currently visible + * on that display, allowing consoles other than fg_console to be refreshed + * appropriately. Unless the low-level driver supplies its own display_fg + * variable, we use this one for the "master display". + */ +static struct vc_data *master_display_fg; + +/* + * Unfortunately, we need to delay tty echo when we're currently writing to the + * console since the code is (and always was) not re-entrant, so we schedule + * all flip requests to process context with schedule-task() and run it from + * console_callback(). + */ + +/* + * For the same reason, we defer scrollback to the console callback. + */ +static int scrollback_delta; + +/* + * Hook so that the power management routines can (un)blank + * the console on our behalf. + */ +int (*console_blank_hook)(int); + +static DEFINE_TIMER(console_timer, blank_screen_t); +static int blank_state; +static int blank_timer_expired; +enum { + blank_off = 0, + blank_normal_wait, + blank_vesa_wait, +}; + +/* + * /sys/class/tty/tty0/ + * + * the attribute 'active' contains the name of the current vc + * console and it supports poll() to detect vc switches + */ +static struct device *tty0dev; + +/* + * Notifier list for console events. + */ +static ATOMIC_NOTIFIER_HEAD(vt_notifier_list); + +int register_vt_notifier(struct notifier_block *nb) +{ + return atomic_notifier_chain_register(&vt_notifier_list, nb); +} +EXPORT_SYMBOL_GPL(register_vt_notifier); + +int unregister_vt_notifier(struct notifier_block *nb) +{ + return atomic_notifier_chain_unregister(&vt_notifier_list, nb); +} +EXPORT_SYMBOL_GPL(unregister_vt_notifier); + +static void notify_write(struct vc_data *vc, unsigned int unicode) +{ + struct vt_notifier_param param = { .vc = vc, .c = unicode }; + atomic_notifier_call_chain(&vt_notifier_list, VT_WRITE, ¶m); +} + +static void notify_update(struct vc_data *vc) +{ + struct vt_notifier_param param = { .vc = vc }; + atomic_notifier_call_chain(&vt_notifier_list, VT_UPDATE, ¶m); +} +/* + * Low-Level Functions + */ + +static inline bool con_is_fg(const struct vc_data *vc) +{ + return vc->vc_num == fg_console; +} + +static inline bool con_should_update(const struct vc_data *vc) +{ + return con_is_visible(vc) && !console_blanked; +} + +static inline unsigned short *screenpos(const struct vc_data *vc, int offset, + bool viewed) +{ + unsigned short *p; + + if (!viewed) + p = (unsigned short *)(vc->vc_origin + offset); + else if (!vc->vc_sw->con_screen_pos) + p = (unsigned short *)(vc->vc_visible_origin + offset); + else + p = vc->vc_sw->con_screen_pos(vc, offset); + return p; +} + +/* Called from the keyboard irq path.. */ +static inline void scrolldelta(int lines) +{ + /* FIXME */ + /* scrolldelta needs some kind of consistency lock, but the BKL was + and still is not protecting versus the scheduled back end */ + scrollback_delta += lines; + schedule_console_callback(); +} + +void schedule_console_callback(void) +{ + schedule_work(&console_work); +} + +/* + * Code to manage unicode-based screen buffers + */ + +#ifdef NO_VC_UNI_SCREEN +/* this disables and optimizes related code away at compile time */ +#define get_vc_uniscr(vc) NULL +#else +#define get_vc_uniscr(vc) vc->vc_uni_screen +#endif + +#define VC_UNI_SCREEN_DEBUG 0 + +typedef uint32_t char32_t; + +/* + * Our screen buffer is preceded by an array of line pointers so that + * scrolling only implies some pointer shuffling. + */ +struct uni_screen { + char32_t *lines[0]; +}; + +static struct uni_screen *vc_uniscr_alloc(unsigned int cols, unsigned int rows) +{ + struct uni_screen *uniscr; + void *p; + unsigned int memsize, i; + + /* allocate everything in one go */ + memsize = cols * rows * sizeof(char32_t); + memsize += rows * sizeof(char32_t *); + p = vzalloc(memsize); + if (!p) + return NULL; + + /* initial line pointers */ + uniscr = p; + p = uniscr->lines + rows; + for (i = 0; i < rows; i++) { + uniscr->lines[i] = p; + p += cols * sizeof(char32_t); + } + return uniscr; +} + +static void vc_uniscr_free(struct uni_screen *uniscr) +{ + vfree(uniscr); +} + +static void vc_uniscr_set(struct vc_data *vc, struct uni_screen *new_uniscr) +{ + vc_uniscr_free(vc->vc_uni_screen); + vc->vc_uni_screen = new_uniscr; +} + +static void vc_uniscr_putc(struct vc_data *vc, char32_t uc) +{ + struct uni_screen *uniscr = get_vc_uniscr(vc); + + if (uniscr) + uniscr->lines[vc->state.y][vc->state.x] = uc; +} + +static void vc_uniscr_insert(struct vc_data *vc, unsigned int nr) +{ + struct uni_screen *uniscr = get_vc_uniscr(vc); + + if (uniscr) { + char32_t *ln = uniscr->lines[vc->state.y]; + unsigned int x = vc->state.x, cols = vc->vc_cols; + + memmove(&ln[x + nr], &ln[x], (cols - x - nr) * sizeof(*ln)); + memset32(&ln[x], ' ', nr); + } +} + +static void vc_uniscr_delete(struct vc_data *vc, unsigned int nr) +{ + struct uni_screen *uniscr = get_vc_uniscr(vc); + + if (uniscr) { + char32_t *ln = uniscr->lines[vc->state.y]; + unsigned int x = vc->state.x, cols = vc->vc_cols; + + memcpy(&ln[x], &ln[x + nr], (cols - x - nr) * sizeof(*ln)); + memset32(&ln[cols - nr], ' ', nr); + } +} + +static void vc_uniscr_clear_line(struct vc_data *vc, unsigned int x, + unsigned int nr) +{ + struct uni_screen *uniscr = get_vc_uniscr(vc); + + if (uniscr) { + char32_t *ln = uniscr->lines[vc->state.y]; + + memset32(&ln[x], ' ', nr); + } +} + +static void vc_uniscr_clear_lines(struct vc_data *vc, unsigned int y, + unsigned int nr) +{ + struct uni_screen *uniscr = get_vc_uniscr(vc); + + if (uniscr) { + unsigned int cols = vc->vc_cols; + + while (nr--) + memset32(uniscr->lines[y++], ' ', cols); + } +} + +static void vc_uniscr_scroll(struct vc_data *vc, unsigned int t, unsigned int b, + enum con_scroll dir, unsigned int nr) +{ + struct uni_screen *uniscr = get_vc_uniscr(vc); + + if (uniscr) { + unsigned int i, j, k, sz, d, clear; + + sz = b - t; + clear = b - nr; + d = nr; + if (dir == SM_DOWN) { + clear = t; + d = sz - nr; + } + for (i = 0; i < gcd(d, sz); i++) { + char32_t *tmp = uniscr->lines[t + i]; + j = i; + while (1) { + k = j + d; + if (k >= sz) + k -= sz; + if (k == i) + break; + uniscr->lines[t + j] = uniscr->lines[t + k]; + j = k; + } + uniscr->lines[t + j] = tmp; + } + vc_uniscr_clear_lines(vc, clear, nr); + } +} + +static void vc_uniscr_copy_area(struct uni_screen *dst, + unsigned int dst_cols, + unsigned int dst_rows, + struct uni_screen *src, + unsigned int src_cols, + unsigned int src_top_row, + unsigned int src_bot_row) +{ + unsigned int dst_row = 0; + + if (!dst) + return; + + while (src_top_row < src_bot_row) { + char32_t *src_line = src->lines[src_top_row]; + char32_t *dst_line = dst->lines[dst_row]; + + memcpy(dst_line, src_line, src_cols * sizeof(char32_t)); + if (dst_cols - src_cols) + memset32(dst_line + src_cols, ' ', dst_cols - src_cols); + src_top_row++; + dst_row++; + } + while (dst_row < dst_rows) { + char32_t *dst_line = dst->lines[dst_row]; + + memset32(dst_line, ' ', dst_cols); + dst_row++; + } +} + +/* + * Called from vcs_read() to make sure unicode screen retrieval is possible. + * This will initialize the unicode screen buffer if not already done. + * This returns 0 if OK, or a negative error code otherwise. + * In particular, -ENODATA is returned if the console is not in UTF-8 mode. + */ +int vc_uniscr_check(struct vc_data *vc) +{ + struct uni_screen *uniscr; + unsigned short *p; + int x, y, mask; + + if (__is_defined(NO_VC_UNI_SCREEN)) + return -EOPNOTSUPP; + + WARN_CONSOLE_UNLOCKED(); + + if (!vc->vc_utf) + return -ENODATA; + + if (vc->vc_uni_screen) + return 0; + + uniscr = vc_uniscr_alloc(vc->vc_cols, vc->vc_rows); + if (!uniscr) + return -ENOMEM; + + /* + * Let's populate it initially with (imperfect) reverse translation. + * This is the next best thing we can do short of having it enabled + * from the start even when no users rely on this functionality. True + * unicode content will be available after a complete screen refresh. + */ + p = (unsigned short *)vc->vc_origin; + mask = vc->vc_hi_font_mask | 0xff; + for (y = 0; y < vc->vc_rows; y++) { + char32_t *line = uniscr->lines[y]; + for (x = 0; x < vc->vc_cols; x++) { + u16 glyph = scr_readw(p++) & mask; + line[x] = inverse_translate(vc, glyph, true); + } + } + + vc->vc_uni_screen = uniscr; + return 0; +} + +/* + * Called from vcs_read() to get the unicode data from the screen. + * This must be preceded by a successful call to vc_uniscr_check() once + * the console lock has been taken. + */ +void vc_uniscr_copy_line(const struct vc_data *vc, void *dest, bool viewed, + unsigned int row, unsigned int col, unsigned int nr) +{ + struct uni_screen *uniscr = get_vc_uniscr(vc); + int offset = row * vc->vc_size_row + col * 2; + unsigned long pos; + + BUG_ON(!uniscr); + + pos = (unsigned long)screenpos(vc, offset, viewed); + if (pos >= vc->vc_origin && pos < vc->vc_scr_end) { + /* + * Desired position falls in the main screen buffer. + * However the actual row/col might be different if + * scrollback is active. + */ + row = (pos - vc->vc_origin) / vc->vc_size_row; + col = ((pos - vc->vc_origin) % vc->vc_size_row) / 2; + memcpy(dest, &uniscr->lines[row][col], nr * sizeof(char32_t)); + } else { + /* + * Scrollback is active. For now let's simply backtranslate + * the screen glyphs until the unicode screen buffer does + * synchronize with console display drivers for a scrollback + * buffer of its own. + */ + u16 *p = (u16 *)pos; + int mask = vc->vc_hi_font_mask | 0xff; + char32_t *uni_buf = dest; + while (nr--) { + u16 glyph = scr_readw(p++) & mask; + *uni_buf++ = inverse_translate(vc, glyph, true); + } + } +} + +/* this is for validation and debugging only */ +static void vc_uniscr_debug_check(struct vc_data *vc) +{ + struct uni_screen *uniscr = get_vc_uniscr(vc); + unsigned short *p; + int x, y, mask; + + if (!VC_UNI_SCREEN_DEBUG || !uniscr) + return; + + WARN_CONSOLE_UNLOCKED(); + + /* + * Make sure our unicode screen translates into the same glyphs + * as the actual screen. This is brutal indeed. + */ + p = (unsigned short *)vc->vc_origin; + mask = vc->vc_hi_font_mask | 0xff; + for (y = 0; y < vc->vc_rows; y++) { + char32_t *line = uniscr->lines[y]; + for (x = 0; x < vc->vc_cols; x++) { + u16 glyph = scr_readw(p++) & mask; + char32_t uc = line[x]; + int tc = conv_uni_to_pc(vc, uc); + if (tc == -4) + tc = conv_uni_to_pc(vc, 0xfffd); + if (tc == -4) + tc = conv_uni_to_pc(vc, '?'); + if (tc != glyph) + pr_err_ratelimited( + "%s: mismatch at %d,%d: glyph=%#x tc=%#x\n", + __func__, x, y, glyph, tc); + } + } +} + + +static void con_scroll(struct vc_data *vc, unsigned int t, unsigned int b, + enum con_scroll dir, unsigned int nr) +{ + u16 *clear, *d, *s; + + if (t + nr >= b) + nr = b - t - 1; + if (b > vc->vc_rows || t >= b || nr < 1) + return; + vc_uniscr_scroll(vc, t, b, dir, nr); + if (con_is_visible(vc) && vc->vc_sw->con_scroll(vc, t, b, dir, nr)) + return; + + s = clear = (u16 *)(vc->vc_origin + vc->vc_size_row * t); + d = (u16 *)(vc->vc_origin + vc->vc_size_row * (t + nr)); + + if (dir == SM_UP) { + clear = s + (b - t - nr) * vc->vc_cols; + swap(s, d); + } + scr_memmovew(d, s, (b - t - nr) * vc->vc_size_row); + scr_memsetw(clear, vc->vc_video_erase_char, vc->vc_size_row * nr); +} + +static void do_update_region(struct vc_data *vc, unsigned long start, int count) +{ + unsigned int xx, yy, offset; + u16 *p; + + p = (u16 *) start; + if (!vc->vc_sw->con_getxy) { + offset = (start - vc->vc_origin) / 2; + xx = offset % vc->vc_cols; + yy = offset / vc->vc_cols; + } else { + int nxx, nyy; + start = vc->vc_sw->con_getxy(vc, start, &nxx, &nyy); + xx = nxx; yy = nyy; + } + for(;;) { + u16 attrib = scr_readw(p) & 0xff00; + int startx = xx; + u16 *q = p; + while (xx < vc->vc_cols && count) { + if (attrib != (scr_readw(p) & 0xff00)) { + if (p > q) + vc->vc_sw->con_putcs(vc, q, p-q, yy, startx); + startx = xx; + q = p; + attrib = scr_readw(p) & 0xff00; + } + p++; + xx++; + count--; + } + if (p > q) + vc->vc_sw->con_putcs(vc, q, p-q, yy, startx); + if (!count) + break; + xx = 0; + yy++; + if (vc->vc_sw->con_getxy) { + p = (u16 *)start; + start = vc->vc_sw->con_getxy(vc, start, NULL, NULL); + } + } +} + +void update_region(struct vc_data *vc, unsigned long start, int count) +{ + WARN_CONSOLE_UNLOCKED(); + + if (con_should_update(vc)) { + hide_cursor(vc); + do_update_region(vc, start, count); + set_cursor(vc); + } +} + +/* Structure of attributes is hardware-dependent */ + +static u8 build_attr(struct vc_data *vc, u8 _color, + enum vc_intensity _intensity, bool _blink, bool _underline, + bool _reverse, bool _italic) +{ + if (vc->vc_sw->con_build_attr) + return vc->vc_sw->con_build_attr(vc, _color, _intensity, + _blink, _underline, _reverse, _italic); + +/* + * ++roman: I completely changed the attribute format for monochrome + * mode (!can_do_color). The formerly used MDA (monochrome display + * adapter) format didn't allow the combination of certain effects. + * Now the attribute is just a bit vector: + * Bit 0..1: intensity (0..2) + * Bit 2 : underline + * Bit 3 : reverse + * Bit 7 : blink + */ + { + u8 a = _color; + if (!vc->vc_can_do_color) + return _intensity | + (_italic << 1) | + (_underline << 2) | + (_reverse << 3) | + (_blink << 7); + if (_italic) + a = (a & 0xF0) | vc->vc_itcolor; + else if (_underline) + a = (a & 0xf0) | vc->vc_ulcolor; + else if (_intensity == VCI_HALF_BRIGHT) + a = (a & 0xf0) | vc->vc_halfcolor; + if (_reverse) + a = (a & 0x88) | (((a >> 4) | (a << 4)) & 0x77); + if (_blink) + a ^= 0x80; + if (_intensity == VCI_BOLD) + a ^= 0x08; + if (vc->vc_hi_font_mask == 0x100) + a <<= 1; + return a; + } +} + +static void update_attr(struct vc_data *vc) +{ + vc->vc_attr = build_attr(vc, vc->state.color, vc->state.intensity, + vc->state.blink, vc->state.underline, + vc->state.reverse ^ vc->vc_decscnm, vc->state.italic); + vc->vc_video_erase_char = ' ' | (build_attr(vc, vc->state.color, + VCI_NORMAL, vc->state.blink, false, + vc->vc_decscnm, false) << 8); +} + +/* Note: inverting the screen twice should revert to the original state */ +void invert_screen(struct vc_data *vc, int offset, int count, bool viewed) +{ + unsigned short *p; + + WARN_CONSOLE_UNLOCKED(); + + count /= 2; + p = screenpos(vc, offset, viewed); + if (vc->vc_sw->con_invert_region) { + vc->vc_sw->con_invert_region(vc, p, count); + } else { + u16 *q = p; + int cnt = count; + u16 a; + + if (!vc->vc_can_do_color) { + while (cnt--) { + a = scr_readw(q); + a ^= 0x0800; + scr_writew(a, q); + q++; + } + } else if (vc->vc_hi_font_mask == 0x100) { + while (cnt--) { + a = scr_readw(q); + a = (a & 0x11ff) | + ((a & 0xe000) >> 4) | + ((a & 0x0e00) << 4); + scr_writew(a, q); + q++; + } + } else { + while (cnt--) { + a = scr_readw(q); + a = (a & 0x88ff) | + ((a & 0x7000) >> 4) | + ((a & 0x0700) << 4); + scr_writew(a, q); + q++; + } + } + } + + if (con_should_update(vc)) + do_update_region(vc, (unsigned long) p, count); + notify_update(vc); +} + +/* used by selection: complement pointer position */ +void complement_pos(struct vc_data *vc, int offset) +{ + static int old_offset = -1; + static unsigned short old; + static unsigned short oldx, oldy; + + WARN_CONSOLE_UNLOCKED(); + + if (old_offset != -1 && old_offset >= 0 && + old_offset < vc->vc_screenbuf_size) { + scr_writew(old, screenpos(vc, old_offset, true)); + if (con_should_update(vc)) + vc->vc_sw->con_putc(vc, old, oldy, oldx); + notify_update(vc); + } + + old_offset = offset; + + if (offset != -1 && offset >= 0 && + offset < vc->vc_screenbuf_size) { + unsigned short new; + unsigned short *p; + p = screenpos(vc, offset, true); + old = scr_readw(p); + new = old ^ vc->vc_complement_mask; + scr_writew(new, p); + if (con_should_update(vc)) { + oldx = (offset >> 1) % vc->vc_cols; + oldy = (offset >> 1) / vc->vc_cols; + vc->vc_sw->con_putc(vc, new, oldy, oldx); + } + notify_update(vc); + } +} + +static void insert_char(struct vc_data *vc, unsigned int nr) +{ + unsigned short *p = (unsigned short *) vc->vc_pos; + + vc_uniscr_insert(vc, nr); + scr_memmovew(p + nr, p, (vc->vc_cols - vc->state.x - nr) * 2); + scr_memsetw(p, vc->vc_video_erase_char, nr * 2); + vc->vc_need_wrap = 0; + if (con_should_update(vc)) + do_update_region(vc, (unsigned long) p, + vc->vc_cols - vc->state.x); +} + +static void delete_char(struct vc_data *vc, unsigned int nr) +{ + unsigned short *p = (unsigned short *) vc->vc_pos; + + vc_uniscr_delete(vc, nr); + scr_memmovew(p, p + nr, (vc->vc_cols - vc->state.x - nr) * 2); + scr_memsetw(p + vc->vc_cols - vc->state.x - nr, vc->vc_video_erase_char, + nr * 2); + vc->vc_need_wrap = 0; + if (con_should_update(vc)) + do_update_region(vc, (unsigned long) p, + vc->vc_cols - vc->state.x); +} + +static int softcursor_original = -1; + +static void add_softcursor(struct vc_data *vc) +{ + int i = scr_readw((u16 *) vc->vc_pos); + u32 type = vc->vc_cursor_type; + + if (!(type & CUR_SW)) + return; + if (softcursor_original != -1) + return; + softcursor_original = i; + i |= CUR_SET(type); + i ^= CUR_CHANGE(type); + if ((type & CUR_ALWAYS_BG) && + (softcursor_original & CUR_BG) == (i & CUR_BG)) + i ^= CUR_BG; + if ((type & CUR_INVERT_FG_BG) && (i & CUR_FG) == ((i & CUR_BG) >> 4)) + i ^= CUR_FG; + scr_writew(i, (u16 *)vc->vc_pos); + if (con_should_update(vc)) + vc->vc_sw->con_putc(vc, i, vc->state.y, vc->state.x); +} + +static void hide_softcursor(struct vc_data *vc) +{ + if (softcursor_original != -1) { + scr_writew(softcursor_original, (u16 *)vc->vc_pos); + if (con_should_update(vc)) + vc->vc_sw->con_putc(vc, softcursor_original, + vc->state.y, vc->state.x); + softcursor_original = -1; + } +} + +static void hide_cursor(struct vc_data *vc) +{ + if (vc_is_sel(vc)) + clear_selection(); + + vc->vc_sw->con_cursor(vc, CM_ERASE); + hide_softcursor(vc); +} + +static void set_cursor(struct vc_data *vc) +{ + if (!con_is_fg(vc) || console_blanked || vc->vc_mode == KD_GRAPHICS) + return; + if (vc->vc_deccm) { + if (vc_is_sel(vc)) + clear_selection(); + add_softcursor(vc); + if (CUR_SIZE(vc->vc_cursor_type) != CUR_NONE) + vc->vc_sw->con_cursor(vc, CM_DRAW); + } else + hide_cursor(vc); +} + +static void set_origin(struct vc_data *vc) +{ + WARN_CONSOLE_UNLOCKED(); + + if (!con_is_visible(vc) || + !vc->vc_sw->con_set_origin || + !vc->vc_sw->con_set_origin(vc)) + vc->vc_origin = (unsigned long)vc->vc_screenbuf; + vc->vc_visible_origin = vc->vc_origin; + vc->vc_scr_end = vc->vc_origin + vc->vc_screenbuf_size; + vc->vc_pos = vc->vc_origin + vc->vc_size_row * vc->state.y + + 2 * vc->state.x; +} + +static void save_screen(struct vc_data *vc) +{ + WARN_CONSOLE_UNLOCKED(); + + if (vc->vc_sw->con_save_screen) + vc->vc_sw->con_save_screen(vc); +} + +static void flush_scrollback(struct vc_data *vc) +{ + WARN_CONSOLE_UNLOCKED(); + + set_origin(vc); + if (vc->vc_sw->con_flush_scrollback) { + vc->vc_sw->con_flush_scrollback(vc); + } else if (con_is_visible(vc)) { + /* + * When no con_flush_scrollback method is provided then the + * legacy way for flushing the scrollback buffer is to use + * a side effect of the con_switch method. We do it only on + * the foreground console as background consoles have no + * scrollback buffers in that case and we obviously don't + * want to switch to them. + */ + hide_cursor(vc); + vc->vc_sw->con_switch(vc); + set_cursor(vc); + } +} + +/* + * Redrawing of screen + */ + +void clear_buffer_attributes(struct vc_data *vc) +{ + unsigned short *p = (unsigned short *)vc->vc_origin; + int count = vc->vc_screenbuf_size / 2; + int mask = vc->vc_hi_font_mask | 0xff; + + for (; count > 0; count--, p++) { + scr_writew((scr_readw(p)&mask) | (vc->vc_video_erase_char & ~mask), p); + } +} + +void redraw_screen(struct vc_data *vc, int is_switch) +{ + int redraw = 0; + + WARN_CONSOLE_UNLOCKED(); + + if (!vc) { + /* strange ... */ + /* printk("redraw_screen: tty %d not allocated ??\n", new_console+1); */ + return; + } + + if (is_switch) { + struct vc_data *old_vc = vc_cons[fg_console].d; + if (old_vc == vc) + return; + if (!con_is_visible(vc)) + redraw = 1; + *vc->vc_display_fg = vc; + fg_console = vc->vc_num; + hide_cursor(old_vc); + if (!con_is_visible(old_vc)) { + save_screen(old_vc); + set_origin(old_vc); + } + if (tty0dev) + sysfs_notify(&tty0dev->kobj, NULL, "active"); + } else { + hide_cursor(vc); + redraw = 1; + } + + if (redraw) { + int update; + int old_was_color = vc->vc_can_do_color; + + set_origin(vc); + update = vc->vc_sw->con_switch(vc); + set_palette(vc); + /* + * If console changed from mono<->color, the best we can do + * is to clear the buffer attributes. As it currently stands, + * rebuilding new attributes from the old buffer is not doable + * without overly complex code. + */ + if (old_was_color != vc->vc_can_do_color) { + update_attr(vc); + clear_buffer_attributes(vc); + } + + if (update && vc->vc_mode != KD_GRAPHICS) + do_update_region(vc, vc->vc_origin, vc->vc_screenbuf_size / 2); + } + set_cursor(vc); + if (is_switch) { + set_leds(); + compute_shiftstate(); + notify_update(vc); + } +} + +/* + * Allocation, freeing and resizing of VTs. + */ + +int vc_cons_allocated(unsigned int i) +{ + return (i < MAX_NR_CONSOLES && vc_cons[i].d); +} + +static void visual_init(struct vc_data *vc, int num, int init) +{ + /* ++Geert: vc->vc_sw->con_init determines console size */ + if (vc->vc_sw) + module_put(vc->vc_sw->owner); + vc->vc_sw = conswitchp; +#ifndef VT_SINGLE_DRIVER + if (con_driver_map[num]) + vc->vc_sw = con_driver_map[num]; +#endif + __module_get(vc->vc_sw->owner); + vc->vc_num = num; + vc->vc_display_fg = &master_display_fg; + if (vc->vc_uni_pagedir_loc) + con_free_unimap(vc); + vc->vc_uni_pagedir_loc = &vc->vc_uni_pagedir; + vc->vc_uni_pagedir = NULL; + vc->vc_hi_font_mask = 0; + vc->vc_complement_mask = 0; + vc->vc_can_do_color = 0; + vc->vc_cur_blink_ms = DEFAULT_CURSOR_BLINK_MS; + vc->vc_sw->con_init(vc, init); + if (!vc->vc_complement_mask) + vc->vc_complement_mask = vc->vc_can_do_color ? 0x7700 : 0x0800; + vc->vc_s_complement_mask = vc->vc_complement_mask; + vc->vc_size_row = vc->vc_cols << 1; + vc->vc_screenbuf_size = vc->vc_rows * vc->vc_size_row; +} + + +static void visual_deinit(struct vc_data *vc) +{ + vc->vc_sw->con_deinit(vc); + module_put(vc->vc_sw->owner); +} + +static void vc_port_destruct(struct tty_port *port) +{ + struct vc_data *vc = container_of(port, struct vc_data, port); + + kfree(vc); +} + +static const struct tty_port_operations vc_port_ops = { + .destruct = vc_port_destruct, +}; + +/* + * Change # of rows and columns (0 means unchanged/the size of fg_console) + * [this is to be used together with some user program + * like resize that changes the hardware videomode] + */ +#define VC_MAXCOL (32767) +#define VC_MAXROW (32767) + +int vc_allocate(unsigned int currcons) /* return 0 on success */ +{ + struct vt_notifier_param param; + struct vc_data *vc; + int err; + + WARN_CONSOLE_UNLOCKED(); + + if (currcons >= MAX_NR_CONSOLES) + return -ENXIO; + + if (vc_cons[currcons].d) + return 0; + + /* due to the granularity of kmalloc, we waste some memory here */ + /* the alloc is done in two steps, to optimize the common situation + of a 25x80 console (structsize=216, screenbuf_size=4000) */ + /* although the numbers above are not valid since long ago, the + point is still up-to-date and the comment still has its value + even if only as a historical artifact. --mj, July 1998 */ + param.vc = vc = kzalloc(sizeof(struct vc_data), GFP_KERNEL); + if (!vc) + return -ENOMEM; + + vc_cons[currcons].d = vc; + tty_port_init(&vc->port); + vc->port.ops = &vc_port_ops; + INIT_WORK(&vc_cons[currcons].SAK_work, vc_SAK); + + visual_init(vc, currcons, 1); + + if (!*vc->vc_uni_pagedir_loc) + con_set_default_unimap(vc); + + err = -EINVAL; + if (vc->vc_cols > VC_MAXCOL || vc->vc_rows > VC_MAXROW || + vc->vc_screenbuf_size > KMALLOC_MAX_SIZE || !vc->vc_screenbuf_size) + goto err_free; + err = -ENOMEM; + vc->vc_screenbuf = kzalloc(vc->vc_screenbuf_size, GFP_KERNEL); + if (!vc->vc_screenbuf) + goto err_free; + + /* If no drivers have overridden us and the user didn't pass a + boot option, default to displaying the cursor */ + if (global_cursor_default == -1) + global_cursor_default = 1; + + vc_init(vc, vc->vc_rows, vc->vc_cols, 1); + vcs_make_sysfs(currcons); + atomic_notifier_call_chain(&vt_notifier_list, VT_ALLOCATE, ¶m); + + return 0; +err_free: + visual_deinit(vc); + kfree(vc); + vc_cons[currcons].d = NULL; + return err; +} + +static inline int resize_screen(struct vc_data *vc, int width, int height, + int user) +{ + /* Resizes the resolution of the display adapater */ + int err = 0; + + if (vc->vc_sw->con_resize) + err = vc->vc_sw->con_resize(vc, width, height, user); + + return err; +} + +/** + * vc_do_resize - resizing method for the tty + * @tty: tty being resized + * @vc: virtual console private data + * @cols: columns + * @lines: lines + * + * Resize a virtual console, clipping according to the actual constraints. + * If the caller passes a tty structure then update the termios winsize + * information and perform any necessary signal handling. + * + * Caller must hold the console semaphore. Takes the termios rwsem and + * ctrl_lock of the tty IFF a tty is passed. + */ + +static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc, + unsigned int cols, unsigned int lines) +{ + unsigned long old_origin, new_origin, new_scr_end, rlth, rrem, err = 0; + unsigned long end; + unsigned int old_rows, old_row_size, first_copied_row; + unsigned int new_cols, new_rows, new_row_size, new_screen_size; + unsigned int user; + unsigned short *oldscreen, *newscreen; + struct uni_screen *new_uniscr = NULL; + + WARN_CONSOLE_UNLOCKED(); + + if (!vc) + return -ENXIO; + + user = vc->vc_resize_user; + vc->vc_resize_user = 0; + + if (cols > VC_MAXCOL || lines > VC_MAXROW) + return -EINVAL; + + new_cols = (cols ? cols : vc->vc_cols); + new_rows = (lines ? lines : vc->vc_rows); + new_row_size = new_cols << 1; + new_screen_size = new_row_size * new_rows; + + if (new_cols == vc->vc_cols && new_rows == vc->vc_rows) { + /* + * This function is being called here to cover the case + * where the userspace calls the FBIOPUT_VSCREENINFO twice, + * passing the same fb_var_screeninfo containing the fields + * yres/xres equal to a number non-multiple of vc_font.height + * and yres_virtual/xres_virtual equal to number lesser than the + * vc_font.height and yres/xres. + * In the second call, the struct fb_var_screeninfo isn't + * being modified by the underlying driver because of the + * if above, and this causes the fbcon_display->vrows to become + * negative and it eventually leads to out-of-bound + * access by the imageblit function. + * To give the correct values to the struct and to not have + * to deal with possible errors from the code below, we call + * the resize_screen here as well. + */ + return resize_screen(vc, new_cols, new_rows, user); + } + + if (new_screen_size > KMALLOC_MAX_SIZE || !new_screen_size) + return -EINVAL; + newscreen = kzalloc(new_screen_size, GFP_USER); + if (!newscreen) + return -ENOMEM; + + if (get_vc_uniscr(vc)) { + new_uniscr = vc_uniscr_alloc(new_cols, new_rows); + if (!new_uniscr) { + kfree(newscreen); + return -ENOMEM; + } + } + + if (vc_is_sel(vc)) + clear_selection(); + + old_rows = vc->vc_rows; + old_row_size = vc->vc_size_row; + + err = resize_screen(vc, new_cols, new_rows, user); + if (err) { + kfree(newscreen); + vc_uniscr_free(new_uniscr); + return err; + } + + vc->vc_rows = new_rows; + vc->vc_cols = new_cols; + vc->vc_size_row = new_row_size; + vc->vc_screenbuf_size = new_screen_size; + + rlth = min(old_row_size, new_row_size); + rrem = new_row_size - rlth; + old_origin = vc->vc_origin; + new_origin = (long) newscreen; + new_scr_end = new_origin + new_screen_size; + + if (vc->state.y > new_rows) { + if (old_rows - vc->state.y < new_rows) { + /* + * Cursor near the bottom, copy contents from the + * bottom of buffer + */ + first_copied_row = (old_rows - new_rows); + } else { + /* + * Cursor is in no man's land, copy 1/2 screenful + * from the top and bottom of cursor position + */ + first_copied_row = (vc->state.y - new_rows/2); + } + old_origin += first_copied_row * old_row_size; + } else + first_copied_row = 0; + end = old_origin + old_row_size * min(old_rows, new_rows); + + vc_uniscr_copy_area(new_uniscr, new_cols, new_rows, + get_vc_uniscr(vc), rlth/2, first_copied_row, + min(old_rows, new_rows)); + vc_uniscr_set(vc, new_uniscr); + + update_attr(vc); + + while (old_origin < end) { + scr_memcpyw((unsigned short *) new_origin, + (unsigned short *) old_origin, rlth); + if (rrem) + scr_memsetw((void *)(new_origin + rlth), + vc->vc_video_erase_char, rrem); + old_origin += old_row_size; + new_origin += new_row_size; + } + if (new_scr_end > new_origin) + scr_memsetw((void *)new_origin, vc->vc_video_erase_char, + new_scr_end - new_origin); + oldscreen = vc->vc_screenbuf; + vc->vc_screenbuf = newscreen; + vc->vc_screenbuf_size = new_screen_size; + set_origin(vc); + kfree(oldscreen); + + /* do part of a reset_terminal() */ + vc->vc_top = 0; + vc->vc_bottom = vc->vc_rows; + gotoxy(vc, vc->state.x, vc->state.y); + save_cur(vc); + + if (tty) { + /* Rewrite the requested winsize data with the actual + resulting sizes */ + struct winsize ws; + memset(&ws, 0, sizeof(ws)); + ws.ws_row = vc->vc_rows; + ws.ws_col = vc->vc_cols; + ws.ws_ypixel = vc->vc_scan_lines; + tty_do_resize(tty, &ws); + } + + if (con_is_visible(vc)) + update_screen(vc); + vt_event_post(VT_EVENT_RESIZE, vc->vc_num, vc->vc_num); + notify_update(vc); + return err; +} + +/** + * vc_resize - resize a VT + * @vc: virtual console + * @cols: columns + * @rows: rows + * + * Resize a virtual console as seen from the console end of things. We + * use the common vc_do_resize methods to update the structures. The + * caller must hold the console sem to protect console internals and + * vc->port.tty + */ + +int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int rows) +{ + return vc_do_resize(vc->port.tty, vc, cols, rows); +} + +/** + * vt_resize - resize a VT + * @tty: tty to resize + * @ws: winsize attributes + * + * Resize a virtual terminal. This is called by the tty layer as we + * register our own handler for resizing. The mutual helper does all + * the actual work. + * + * Takes the console sem and the called methods then take the tty + * termios_rwsem and the tty ctrl_lock in that order. + */ +static int vt_resize(struct tty_struct *tty, struct winsize *ws) +{ + struct vc_data *vc = tty->driver_data; + int ret; + + console_lock(); + ret = vc_do_resize(tty, vc, ws->ws_col, ws->ws_row); + console_unlock(); + return ret; +} + +struct vc_data *vc_deallocate(unsigned int currcons) +{ + struct vc_data *vc = NULL; + + WARN_CONSOLE_UNLOCKED(); + + if (vc_cons_allocated(currcons)) { + struct vt_notifier_param param; + + param.vc = vc = vc_cons[currcons].d; + atomic_notifier_call_chain(&vt_notifier_list, VT_DEALLOCATE, ¶m); + vcs_remove_sysfs(currcons); + visual_deinit(vc); + con_free_unimap(vc); + put_pid(vc->vt_pid); + vc_uniscr_set(vc, NULL); + kfree(vc->vc_screenbuf); + vc_cons[currcons].d = NULL; + } + return vc; +} + +/* + * VT102 emulator + */ + +enum { EPecma = 0, EPdec, EPeq, EPgt, EPlt}; + +#define set_kbd(vc, x) vt_set_kbd_mode_bit((vc)->vc_num, (x)) +#define clr_kbd(vc, x) vt_clr_kbd_mode_bit((vc)->vc_num, (x)) +#define is_kbd(vc, x) vt_get_kbd_mode_bit((vc)->vc_num, (x)) + +#define decarm VC_REPEAT +#define decckm VC_CKMODE +#define kbdapplic VC_APPLIC +#define lnm VC_CRLF + +const unsigned char color_table[] = { 0, 4, 2, 6, 1, 5, 3, 7, + 8,12,10,14, 9,13,11,15 }; + +/* the default colour table, for VGA+ colour systems */ +unsigned char default_red[] = { + 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, + 0x55, 0xff, 0x55, 0xff, 0x55, 0xff, 0x55, 0xff +}; +module_param_array(default_red, byte, NULL, S_IRUGO | S_IWUSR); + +unsigned char default_grn[] = { + 0x00, 0x00, 0xaa, 0x55, 0x00, 0x00, 0xaa, 0xaa, + 0x55, 0x55, 0xff, 0xff, 0x55, 0x55, 0xff, 0xff +}; +module_param_array(default_grn, byte, NULL, S_IRUGO | S_IWUSR); + +unsigned char default_blu[] = { + 0x00, 0x00, 0x00, 0x00, 0xaa, 0xaa, 0xaa, 0xaa, + 0x55, 0x55, 0x55, 0x55, 0xff, 0xff, 0xff, 0xff +}; +module_param_array(default_blu, byte, NULL, S_IRUGO | S_IWUSR); + +/* + * gotoxy() must verify all boundaries, because the arguments + * might also be negative. If the given position is out of + * bounds, the cursor is placed at the nearest margin. + */ +static void gotoxy(struct vc_data *vc, int new_x, int new_y) +{ + int min_y, max_y; + + if (new_x < 0) + vc->state.x = 0; + else { + if (new_x >= vc->vc_cols) + vc->state.x = vc->vc_cols - 1; + else + vc->state.x = new_x; + } + + if (vc->vc_decom) { + min_y = vc->vc_top; + max_y = vc->vc_bottom; + } else { + min_y = 0; + max_y = vc->vc_rows; + } + if (new_y < min_y) + vc->state.y = min_y; + else if (new_y >= max_y) + vc->state.y = max_y - 1; + else + vc->state.y = new_y; + vc->vc_pos = vc->vc_origin + vc->state.y * vc->vc_size_row + + (vc->state.x << 1); + vc->vc_need_wrap = 0; +} + +/* for absolute user moves, when decom is set */ +static void gotoxay(struct vc_data *vc, int new_x, int new_y) +{ + gotoxy(vc, new_x, vc->vc_decom ? (vc->vc_top + new_y) : new_y); +} + +void scrollback(struct vc_data *vc) +{ + scrolldelta(-(vc->vc_rows / 2)); +} + +void scrollfront(struct vc_data *vc, int lines) +{ + if (!lines) + lines = vc->vc_rows / 2; + scrolldelta(lines); +} + +static void lf(struct vc_data *vc) +{ + /* don't scroll if above bottom of scrolling region, or + * if below scrolling region + */ + if (vc->state.y + 1 == vc->vc_bottom) + con_scroll(vc, vc->vc_top, vc->vc_bottom, SM_UP, 1); + else if (vc->state.y < vc->vc_rows - 1) { + vc->state.y++; + vc->vc_pos += vc->vc_size_row; + } + vc->vc_need_wrap = 0; + notify_write(vc, '\n'); +} + +static void ri(struct vc_data *vc) +{ + /* don't scroll if below top of scrolling region, or + * if above scrolling region + */ + if (vc->state.y == vc->vc_top) + con_scroll(vc, vc->vc_top, vc->vc_bottom, SM_DOWN, 1); + else if (vc->state.y > 0) { + vc->state.y--; + vc->vc_pos -= vc->vc_size_row; + } + vc->vc_need_wrap = 0; +} + +static inline void cr(struct vc_data *vc) +{ + vc->vc_pos -= vc->state.x << 1; + vc->vc_need_wrap = vc->state.x = 0; + notify_write(vc, '\r'); +} + +static inline void bs(struct vc_data *vc) +{ + if (vc->state.x) { + vc->vc_pos -= 2; + vc->state.x--; + vc->vc_need_wrap = 0; + notify_write(vc, '\b'); + } +} + +static inline void del(struct vc_data *vc) +{ + /* ignored */ +} + +static void csi_J(struct vc_data *vc, int vpar) +{ + unsigned int count; + unsigned short * start; + + switch (vpar) { + case 0: /* erase from cursor to end of display */ + vc_uniscr_clear_line(vc, vc->state.x, + vc->vc_cols - vc->state.x); + vc_uniscr_clear_lines(vc, vc->state.y + 1, + vc->vc_rows - vc->state.y - 1); + count = (vc->vc_scr_end - vc->vc_pos) >> 1; + start = (unsigned short *)vc->vc_pos; + break; + case 1: /* erase from start to cursor */ + vc_uniscr_clear_line(vc, 0, vc->state.x + 1); + vc_uniscr_clear_lines(vc, 0, vc->state.y); + count = ((vc->vc_pos - vc->vc_origin) >> 1) + 1; + start = (unsigned short *)vc->vc_origin; + break; + case 3: /* include scrollback */ + flush_scrollback(vc); + fallthrough; + case 2: /* erase whole display */ + vc_uniscr_clear_lines(vc, 0, vc->vc_rows); + count = vc->vc_cols * vc->vc_rows; + start = (unsigned short *)vc->vc_origin; + break; + default: + return; + } + scr_memsetw(start, vc->vc_video_erase_char, 2 * count); + if (con_should_update(vc)) + do_update_region(vc, (unsigned long) start, count); + vc->vc_need_wrap = 0; +} + +static void csi_K(struct vc_data *vc, int vpar) +{ + unsigned int count; + unsigned short *start = (unsigned short *)vc->vc_pos; + int offset; + + switch (vpar) { + case 0: /* erase from cursor to end of line */ + offset = 0; + count = vc->vc_cols - vc->state.x; + break; + case 1: /* erase from start of line to cursor */ + offset = -vc->state.x; + count = vc->state.x + 1; + break; + case 2: /* erase whole line */ + offset = -vc->state.x; + count = vc->vc_cols; + break; + default: + return; + } + vc_uniscr_clear_line(vc, vc->state.x + offset, count); + scr_memsetw(start + offset, vc->vc_video_erase_char, 2 * count); + vc->vc_need_wrap = 0; + if (con_should_update(vc)) + do_update_region(vc, (unsigned long)(start + offset), count); +} + +/* erase the following vpar positions */ +static void csi_X(struct vc_data *vc, unsigned int vpar) +{ /* not vt100? */ + unsigned int count; + + if (!vpar) + vpar++; + + count = min(vpar, vc->vc_cols - vc->state.x); + + vc_uniscr_clear_line(vc, vc->state.x, count); + scr_memsetw((unsigned short *)vc->vc_pos, vc->vc_video_erase_char, 2 * count); + if (con_should_update(vc)) + vc->vc_sw->con_clear(vc, vc->state.y, vc->state.x, 1, count); + vc->vc_need_wrap = 0; +} + +static void default_attr(struct vc_data *vc) +{ + vc->state.intensity = VCI_NORMAL; + vc->state.italic = false; + vc->state.underline = false; + vc->state.reverse = false; + vc->state.blink = false; + vc->state.color = vc->vc_def_color; +} + +struct rgb { u8 r; u8 g; u8 b; }; + +static void rgb_from_256(int i, struct rgb *c) +{ + if (i < 8) { /* Standard colours. */ + c->r = i&1 ? 0xaa : 0x00; + c->g = i&2 ? 0xaa : 0x00; + c->b = i&4 ? 0xaa : 0x00; + } else if (i < 16) { + c->r = i&1 ? 0xff : 0x55; + c->g = i&2 ? 0xff : 0x55; + c->b = i&4 ? 0xff : 0x55; + } else if (i < 232) { /* 6x6x6 colour cube. */ + c->r = (i - 16) / 36 * 85 / 2; + c->g = (i - 16) / 6 % 6 * 85 / 2; + c->b = (i - 16) % 6 * 85 / 2; + } else /* Grayscale ramp. */ + c->r = c->g = c->b = i * 10 - 2312; +} + +static void rgb_foreground(struct vc_data *vc, const struct rgb *c) +{ + u8 hue = 0, max = max3(c->r, c->g, c->b); + + if (c->r > max / 2) + hue |= 4; + if (c->g > max / 2) + hue |= 2; + if (c->b > max / 2) + hue |= 1; + + if (hue == 7 && max <= 0x55) { + hue = 0; + vc->state.intensity = VCI_BOLD; + } else if (max > 0xaa) + vc->state.intensity = VCI_BOLD; + else + vc->state.intensity = VCI_NORMAL; + + vc->state.color = (vc->state.color & 0xf0) | hue; +} + +static void rgb_background(struct vc_data *vc, const struct rgb *c) +{ + /* For backgrounds, err on the dark side. */ + vc->state.color = (vc->state.color & 0x0f) + | (c->r&0x80) >> 1 | (c->g&0x80) >> 2 | (c->b&0x80) >> 3; +} + +/* + * ITU T.416 Higher colour modes. They break the usual properties of SGR codes + * and thus need to be detected and ignored by hand. That standard also + * wants : rather than ; as separators but sequences containing : are currently + * completely ignored by the parser. + * + * Subcommands 3 (CMY) and 4 (CMYK) are so insane there's no point in + * supporting them. + */ +static int vc_t416_color(struct vc_data *vc, int i, + void(*set_color)(struct vc_data *vc, const struct rgb *c)) +{ + struct rgb c; + + i++; + if (i > vc->vc_npar) + return i; + + if (vc->vc_par[i] == 5 && i + 1 <= vc->vc_npar) { + /* 256 colours */ + i++; + rgb_from_256(vc->vc_par[i], &c); + } else if (vc->vc_par[i] == 2 && i + 3 <= vc->vc_npar) { + /* 24 bit */ + c.r = vc->vc_par[i + 1]; + c.g = vc->vc_par[i + 2]; + c.b = vc->vc_par[i + 3]; + i += 3; + } else + return i; + + set_color(vc, &c); + + return i; +} + +/* console_lock is held */ +static void csi_m(struct vc_data *vc) +{ + int i; + + for (i = 0; i <= vc->vc_npar; i++) + switch (vc->vc_par[i]) { + case 0: /* all attributes off */ + default_attr(vc); + break; + case 1: + vc->state.intensity = VCI_BOLD; + break; + case 2: + vc->state.intensity = VCI_HALF_BRIGHT; + break; + case 3: + vc->state.italic = true; + break; + case 21: + /* + * No console drivers support double underline, so + * convert it to a single underline. + */ + case 4: + vc->state.underline = true; + break; + case 5: + vc->state.blink = true; + break; + case 7: + vc->state.reverse = true; + break; + case 10: /* ANSI X3.64-1979 (SCO-ish?) + * Select primary font, don't display control chars if + * defined, don't set bit 8 on output. + */ + vc->vc_translate = set_translate(vc->state.Gx_charset[vc->state.charset], vc); + vc->vc_disp_ctrl = 0; + vc->vc_toggle_meta = 0; + break; + case 11: /* ANSI X3.64-1979 (SCO-ish?) + * Select first alternate font, lets chars < 32 be + * displayed as ROM chars. + */ + vc->vc_translate = set_translate(IBMPC_MAP, vc); + vc->vc_disp_ctrl = 1; + vc->vc_toggle_meta = 0; + break; + case 12: /* ANSI X3.64-1979 (SCO-ish?) + * Select second alternate font, toggle high bit + * before displaying as ROM char. + */ + vc->vc_translate = set_translate(IBMPC_MAP, vc); + vc->vc_disp_ctrl = 1; + vc->vc_toggle_meta = 1; + break; + case 22: + vc->state.intensity = VCI_NORMAL; + break; + case 23: + vc->state.italic = false; + break; + case 24: + vc->state.underline = false; + break; + case 25: + vc->state.blink = false; + break; + case 27: + vc->state.reverse = false; + break; + case 38: + i = vc_t416_color(vc, i, rgb_foreground); + break; + case 48: + i = vc_t416_color(vc, i, rgb_background); + break; + case 39: + vc->state.color = (vc->vc_def_color & 0x0f) | + (vc->state.color & 0xf0); + break; + case 49: + vc->state.color = (vc->vc_def_color & 0xf0) | + (vc->state.color & 0x0f); + break; + default: + if (vc->vc_par[i] >= 90 && vc->vc_par[i] <= 107) { + if (vc->vc_par[i] < 100) + vc->state.intensity = VCI_BOLD; + vc->vc_par[i] -= 60; + } + if (vc->vc_par[i] >= 30 && vc->vc_par[i] <= 37) + vc->state.color = color_table[vc->vc_par[i] - 30] + | (vc->state.color & 0xf0); + else if (vc->vc_par[i] >= 40 && vc->vc_par[i] <= 47) + vc->state.color = (color_table[vc->vc_par[i] - 40] << 4) + | (vc->state.color & 0x0f); + break; + } + update_attr(vc); +} + +static void respond_string(const char *p, size_t len, struct tty_port *port) +{ + tty_insert_flip_string(port, p, len); + tty_flip_buffer_push(port); +} + +static void cursor_report(struct vc_data *vc, struct tty_struct *tty) +{ + char buf[40]; + int len; + + len = sprintf(buf, "\033[%d;%dR", vc->state.y + + (vc->vc_decom ? vc->vc_top + 1 : 1), + vc->state.x + 1); + respond_string(buf, len, tty->port); +} + +static inline void status_report(struct tty_struct *tty) +{ + static const char teminal_ok[] = "\033[0n"; + + respond_string(teminal_ok, strlen(teminal_ok), tty->port); +} + +static inline void respond_ID(struct tty_struct *tty) +{ + /* terminal answer to an ESC-Z or csi0c query. */ + static const char vt102_id[] = "\033[?6c"; + + respond_string(vt102_id, strlen(vt102_id), tty->port); +} + +void mouse_report(struct tty_struct *tty, int butt, int mrx, int mry) +{ + char buf[8]; + int len; + + len = sprintf(buf, "\033[M%c%c%c", (char)(' ' + butt), + (char)('!' + mrx), (char)('!' + mry)); + respond_string(buf, len, tty->port); +} + +/* invoked via ioctl(TIOCLINUX) and through set_selection_user */ +int mouse_reporting(void) +{ + return vc_cons[fg_console].d->vc_report_mouse; +} + +/* console_lock is held */ +static void set_mode(struct vc_data *vc, int on_off) +{ + int i; + + for (i = 0; i <= vc->vc_npar; i++) + if (vc->vc_priv == EPdec) { + switch(vc->vc_par[i]) { /* DEC private modes set/reset */ + case 1: /* Cursor keys send ^[Ox/^[[x */ + if (on_off) + set_kbd(vc, decckm); + else + clr_kbd(vc, decckm); + break; + case 3: /* 80/132 mode switch unimplemented */ +#if 0 + vc_resize(deccolm ? 132 : 80, vc->vc_rows); + /* this alone does not suffice; some user mode + utility has to change the hardware regs */ +#endif + break; + case 5: /* Inverted screen on/off */ + if (vc->vc_decscnm != on_off) { + vc->vc_decscnm = on_off; + invert_screen(vc, 0, + vc->vc_screenbuf_size, + false); + update_attr(vc); + } + break; + case 6: /* Origin relative/absolute */ + vc->vc_decom = on_off; + gotoxay(vc, 0, 0); + break; + case 7: /* Autowrap on/off */ + vc->vc_decawm = on_off; + break; + case 8: /* Autorepeat on/off */ + if (on_off) + set_kbd(vc, decarm); + else + clr_kbd(vc, decarm); + break; + case 9: + vc->vc_report_mouse = on_off ? 1 : 0; + break; + case 25: /* Cursor on/off */ + vc->vc_deccm = on_off; + break; + case 1000: + vc->vc_report_mouse = on_off ? 2 : 0; + break; + } + } else { + switch(vc->vc_par[i]) { /* ANSI modes set/reset */ + case 3: /* Monitor (display ctrls) */ + vc->vc_disp_ctrl = on_off; + break; + case 4: /* Insert Mode on/off */ + vc->vc_decim = on_off; + break; + case 20: /* Lf, Enter == CrLf/Lf */ + if (on_off) + set_kbd(vc, lnm); + else + clr_kbd(vc, lnm); + break; + } + } +} + +/* console_lock is held */ +static void setterm_command(struct vc_data *vc) +{ + switch (vc->vc_par[0]) { + case 1: /* set color for underline mode */ + if (vc->vc_can_do_color && vc->vc_par[1] < 16) { + vc->vc_ulcolor = color_table[vc->vc_par[1]]; + if (vc->state.underline) + update_attr(vc); + } + break; + case 2: /* set color for half intensity mode */ + if (vc->vc_can_do_color && vc->vc_par[1] < 16) { + vc->vc_halfcolor = color_table[vc->vc_par[1]]; + if (vc->state.intensity == VCI_HALF_BRIGHT) + update_attr(vc); + } + break; + case 8: /* store colors as defaults */ + vc->vc_def_color = vc->vc_attr; + if (vc->vc_hi_font_mask == 0x100) + vc->vc_def_color >>= 1; + default_attr(vc); + update_attr(vc); + break; + case 9: /* set blanking interval */ + blankinterval = min(vc->vc_par[1], 60U) * 60; + poke_blanked_console(); + break; + case 10: /* set bell frequency in Hz */ + if (vc->vc_npar >= 1) + vc->vc_bell_pitch = vc->vc_par[1]; + else + vc->vc_bell_pitch = DEFAULT_BELL_PITCH; + break; + case 11: /* set bell duration in msec */ + if (vc->vc_npar >= 1) + vc->vc_bell_duration = (vc->vc_par[1] < 2000) ? + msecs_to_jiffies(vc->vc_par[1]) : 0; + else + vc->vc_bell_duration = DEFAULT_BELL_DURATION; + break; + case 12: /* bring specified console to the front */ + if (vc->vc_par[1] >= 1 && vc_cons_allocated(vc->vc_par[1] - 1)) + set_console(vc->vc_par[1] - 1); + break; + case 13: /* unblank the screen */ + poke_blanked_console(); + break; + case 14: /* set vesa powerdown interval */ + vesa_off_interval = min(vc->vc_par[1], 60U) * 60 * HZ; + break; + case 15: /* activate the previous console */ + set_console(last_console); + break; + case 16: /* set cursor blink duration in msec */ + if (vc->vc_npar >= 1 && vc->vc_par[1] >= 50 && + vc->vc_par[1] <= USHRT_MAX) + vc->vc_cur_blink_ms = vc->vc_par[1]; + else + vc->vc_cur_blink_ms = DEFAULT_CURSOR_BLINK_MS; + break; + } +} + +/* console_lock is held */ +static void csi_at(struct vc_data *vc, unsigned int nr) +{ + if (nr > vc->vc_cols - vc->state.x) + nr = vc->vc_cols - vc->state.x; + else if (!nr) + nr = 1; + insert_char(vc, nr); +} + +/* console_lock is held */ +static void csi_L(struct vc_data *vc, unsigned int nr) +{ + if (nr > vc->vc_rows - vc->state.y) + nr = vc->vc_rows - vc->state.y; + else if (!nr) + nr = 1; + con_scroll(vc, vc->state.y, vc->vc_bottom, SM_DOWN, nr); + vc->vc_need_wrap = 0; +} + +/* console_lock is held */ +static void csi_P(struct vc_data *vc, unsigned int nr) +{ + if (nr > vc->vc_cols - vc->state.x) + nr = vc->vc_cols - vc->state.x; + else if (!nr) + nr = 1; + delete_char(vc, nr); +} + +/* console_lock is held */ +static void csi_M(struct vc_data *vc, unsigned int nr) +{ + if (nr > vc->vc_rows - vc->state.y) + nr = vc->vc_rows - vc->state.y; + else if (!nr) + nr=1; + con_scroll(vc, vc->state.y, vc->vc_bottom, SM_UP, nr); + vc->vc_need_wrap = 0; +} + +/* console_lock is held (except via vc_init->reset_terminal */ +static void save_cur(struct vc_data *vc) +{ + memcpy(&vc->saved_state, &vc->state, sizeof(vc->state)); +} + +/* console_lock is held */ +static void restore_cur(struct vc_data *vc) +{ + memcpy(&vc->state, &vc->saved_state, sizeof(vc->state)); + + gotoxy(vc, vc->state.x, vc->state.y); + vc->vc_translate = set_translate(vc->state.Gx_charset[vc->state.charset], + vc); + update_attr(vc); + vc->vc_need_wrap = 0; +} + +enum { ESnormal, ESesc, ESsquare, ESgetpars, ESfunckey, + EShash, ESsetG0, ESsetG1, ESpercent, EScsiignore, ESnonstd, + ESpalette, ESosc, ESapc, ESpm, ESdcs }; + +/* console_lock is held (except via vc_init()) */ +static void reset_terminal(struct vc_data *vc, int do_clear) +{ + unsigned int i; + + vc->vc_top = 0; + vc->vc_bottom = vc->vc_rows; + vc->vc_state = ESnormal; + vc->vc_priv = EPecma; + vc->vc_translate = set_translate(LAT1_MAP, vc); + vc->state.Gx_charset[0] = LAT1_MAP; + vc->state.Gx_charset[1] = GRAF_MAP; + vc->state.charset = 0; + vc->vc_need_wrap = 0; + vc->vc_report_mouse = 0; + vc->vc_utf = default_utf8; + vc->vc_utf_count = 0; + + vc->vc_disp_ctrl = 0; + vc->vc_toggle_meta = 0; + + vc->vc_decscnm = 0; + vc->vc_decom = 0; + vc->vc_decawm = 1; + vc->vc_deccm = global_cursor_default; + vc->vc_decim = 0; + + vt_reset_keyboard(vc->vc_num); + + vc->vc_cursor_type = cur_default; + vc->vc_complement_mask = vc->vc_s_complement_mask; + + default_attr(vc); + update_attr(vc); + + bitmap_zero(vc->vc_tab_stop, VC_TABSTOPS_COUNT); + for (i = 0; i < VC_TABSTOPS_COUNT; i += 8) + set_bit(i, vc->vc_tab_stop); + + vc->vc_bell_pitch = DEFAULT_BELL_PITCH; + vc->vc_bell_duration = DEFAULT_BELL_DURATION; + vc->vc_cur_blink_ms = DEFAULT_CURSOR_BLINK_MS; + + gotoxy(vc, 0, 0); + save_cur(vc); + if (do_clear) + csi_J(vc, 2); +} + +static void vc_setGx(struct vc_data *vc, unsigned int which, int c) +{ + unsigned char *charset = &vc->state.Gx_charset[which]; + + switch (c) { + case '0': + *charset = GRAF_MAP; + break; + case 'B': + *charset = LAT1_MAP; + break; + case 'U': + *charset = IBMPC_MAP; + break; + case 'K': + *charset = USER_MAP; + break; + } + + if (vc->state.charset == which) + vc->vc_translate = set_translate(*charset, vc); +} + +/* is this state an ANSI control string? */ +static bool ansi_control_string(unsigned int state) +{ + if (state == ESosc || state == ESapc || state == ESpm || state == ESdcs) + return true; + return false; +} + +/* console_lock is held */ +static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c) +{ + /* + * Control characters can be used in the _middle_ + * of an escape sequence, aside from ANSI control strings. + */ + if (ansi_control_string(vc->vc_state) && c >= 8 && c <= 13) + return; + switch (c) { + case 0: + return; + case 7: + if (ansi_control_string(vc->vc_state)) + vc->vc_state = ESnormal; + else if (vc->vc_bell_duration) + kd_mksound(vc->vc_bell_pitch, vc->vc_bell_duration); + return; + case 8: + bs(vc); + return; + case 9: + vc->vc_pos -= (vc->state.x << 1); + + vc->state.x = find_next_bit(vc->vc_tab_stop, + min(vc->vc_cols - 1, VC_TABSTOPS_COUNT), + vc->state.x + 1); + if (vc->state.x >= VC_TABSTOPS_COUNT) + vc->state.x = vc->vc_cols - 1; + + vc->vc_pos += (vc->state.x << 1); + notify_write(vc, '\t'); + return; + case 10: case 11: case 12: + lf(vc); + if (!is_kbd(vc, lnm)) + return; + fallthrough; + case 13: + cr(vc); + return; + case 14: + vc->state.charset = 1; + vc->vc_translate = set_translate(vc->state.Gx_charset[1], vc); + vc->vc_disp_ctrl = 1; + return; + case 15: + vc->state.charset = 0; + vc->vc_translate = set_translate(vc->state.Gx_charset[0], vc); + vc->vc_disp_ctrl = 0; + return; + case 24: case 26: + vc->vc_state = ESnormal; + return; + case 27: + vc->vc_state = ESesc; + return; + case 127: + del(vc); + return; + case 128+27: + vc->vc_state = ESsquare; + return; + } + switch(vc->vc_state) { + case ESesc: + vc->vc_state = ESnormal; + switch (c) { + case '[': + vc->vc_state = ESsquare; + return; + case ']': + vc->vc_state = ESnonstd; + return; + case '_': + vc->vc_state = ESapc; + return; + case '^': + vc->vc_state = ESpm; + return; + case '%': + vc->vc_state = ESpercent; + return; + case 'E': + cr(vc); + lf(vc); + return; + case 'M': + ri(vc); + return; + case 'D': + lf(vc); + return; + case 'H': + if (vc->state.x < VC_TABSTOPS_COUNT) + set_bit(vc->state.x, vc->vc_tab_stop); + return; + case 'P': + vc->vc_state = ESdcs; + return; + case 'Z': + respond_ID(tty); + return; + case '7': + save_cur(vc); + return; + case '8': + restore_cur(vc); + return; + case '(': + vc->vc_state = ESsetG0; + return; + case ')': + vc->vc_state = ESsetG1; + return; + case '#': + vc->vc_state = EShash; + return; + case 'c': + reset_terminal(vc, 1); + return; + case '>': /* Numeric keypad */ + clr_kbd(vc, kbdapplic); + return; + case '=': /* Appl. keypad */ + set_kbd(vc, kbdapplic); + return; + } + return; + case ESnonstd: + if (c=='P') { /* palette escape sequence */ + for (vc->vc_npar = 0; vc->vc_npar < NPAR; vc->vc_npar++) + vc->vc_par[vc->vc_npar] = 0; + vc->vc_npar = 0; + vc->vc_state = ESpalette; + return; + } else if (c=='R') { /* reset palette */ + reset_palette(vc); + vc->vc_state = ESnormal; + } else if (c>='0' && c<='9') + vc->vc_state = ESosc; + else + vc->vc_state = ESnormal; + return; + case ESpalette: + if (isxdigit(c)) { + vc->vc_par[vc->vc_npar++] = hex_to_bin(c); + if (vc->vc_npar == 7) { + int i = vc->vc_par[0] * 3, j = 1; + vc->vc_palette[i] = 16 * vc->vc_par[j++]; + vc->vc_palette[i++] += vc->vc_par[j++]; + vc->vc_palette[i] = 16 * vc->vc_par[j++]; + vc->vc_palette[i++] += vc->vc_par[j++]; + vc->vc_palette[i] = 16 * vc->vc_par[j++]; + vc->vc_palette[i] += vc->vc_par[j]; + set_palette(vc); + vc->vc_state = ESnormal; + } + } else + vc->vc_state = ESnormal; + return; + case ESsquare: + for (vc->vc_npar = 0; vc->vc_npar < NPAR; vc->vc_npar++) + vc->vc_par[vc->vc_npar] = 0; + vc->vc_npar = 0; + vc->vc_state = ESgetpars; + if (c == '[') { /* Function key */ + vc->vc_state=ESfunckey; + return; + } + switch (c) { + case '?': + vc->vc_priv = EPdec; + return; + case '>': + vc->vc_priv = EPgt; + return; + case '=': + vc->vc_priv = EPeq; + return; + case '<': + vc->vc_priv = EPlt; + return; + } + vc->vc_priv = EPecma; + fallthrough; + case ESgetpars: + if (c == ';' && vc->vc_npar < NPAR - 1) { + vc->vc_npar++; + return; + } else if (c>='0' && c<='9') { + vc->vc_par[vc->vc_npar] *= 10; + vc->vc_par[vc->vc_npar] += c - '0'; + return; + } + if (c >= 0x20 && c <= 0x3f) { /* 0x2x, 0x3a and 0x3c - 0x3f */ + vc->vc_state = EScsiignore; + return; + } + vc->vc_state = ESnormal; + switch(c) { + case 'h': + if (vc->vc_priv <= EPdec) + set_mode(vc, 1); + return; + case 'l': + if (vc->vc_priv <= EPdec) + set_mode(vc, 0); + return; + case 'c': + if (vc->vc_priv == EPdec) { + if (vc->vc_par[0]) + vc->vc_cursor_type = + CUR_MAKE(vc->vc_par[0], + vc->vc_par[1], + vc->vc_par[2]); + else + vc->vc_cursor_type = cur_default; + return; + } + break; + case 'm': + if (vc->vc_priv == EPdec) { + clear_selection(); + if (vc->vc_par[0]) + vc->vc_complement_mask = vc->vc_par[0] << 8 | vc->vc_par[1]; + else + vc->vc_complement_mask = vc->vc_s_complement_mask; + return; + } + break; + case 'n': + if (vc->vc_priv == EPecma) { + if (vc->vc_par[0] == 5) + status_report(tty); + else if (vc->vc_par[0] == 6) + cursor_report(vc, tty); + } + return; + } + if (vc->vc_priv != EPecma) { + vc->vc_priv = EPecma; + return; + } + switch(c) { + case 'G': case '`': + if (vc->vc_par[0]) + vc->vc_par[0]--; + gotoxy(vc, vc->vc_par[0], vc->state.y); + return; + case 'A': + if (!vc->vc_par[0]) + vc->vc_par[0]++; + gotoxy(vc, vc->state.x, vc->state.y - vc->vc_par[0]); + return; + case 'B': case 'e': + if (!vc->vc_par[0]) + vc->vc_par[0]++; + gotoxy(vc, vc->state.x, vc->state.y + vc->vc_par[0]); + return; + case 'C': case 'a': + if (!vc->vc_par[0]) + vc->vc_par[0]++; + gotoxy(vc, vc->state.x + vc->vc_par[0], vc->state.y); + return; + case 'D': + if (!vc->vc_par[0]) + vc->vc_par[0]++; + gotoxy(vc, vc->state.x - vc->vc_par[0], vc->state.y); + return; + case 'E': + if (!vc->vc_par[0]) + vc->vc_par[0]++; + gotoxy(vc, 0, vc->state.y + vc->vc_par[0]); + return; + case 'F': + if (!vc->vc_par[0]) + vc->vc_par[0]++; + gotoxy(vc, 0, vc->state.y - vc->vc_par[0]); + return; + case 'd': + if (vc->vc_par[0]) + vc->vc_par[0]--; + gotoxay(vc, vc->state.x ,vc->vc_par[0]); + return; + case 'H': case 'f': + if (vc->vc_par[0]) + vc->vc_par[0]--; + if (vc->vc_par[1]) + vc->vc_par[1]--; + gotoxay(vc, vc->vc_par[1], vc->vc_par[0]); + return; + case 'J': + csi_J(vc, vc->vc_par[0]); + return; + case 'K': + csi_K(vc, vc->vc_par[0]); + return; + case 'L': + csi_L(vc, vc->vc_par[0]); + return; + case 'M': + csi_M(vc, vc->vc_par[0]); + return; + case 'P': + csi_P(vc, vc->vc_par[0]); + return; + case 'c': + if (!vc->vc_par[0]) + respond_ID(tty); + return; + case 'g': + if (!vc->vc_par[0] && vc->state.x < VC_TABSTOPS_COUNT) + set_bit(vc->state.x, vc->vc_tab_stop); + else if (vc->vc_par[0] == 3) + bitmap_zero(vc->vc_tab_stop, VC_TABSTOPS_COUNT); + return; + case 'm': + csi_m(vc); + return; + case 'q': /* DECLL - but only 3 leds */ + /* map 0,1,2,3 to 0,1,2,4 */ + if (vc->vc_par[0] < 4) + vt_set_led_state(vc->vc_num, + (vc->vc_par[0] < 3) ? vc->vc_par[0] : 4); + return; + case 'r': + if (!vc->vc_par[0]) + vc->vc_par[0]++; + if (!vc->vc_par[1]) + vc->vc_par[1] = vc->vc_rows; + /* Minimum allowed region is 2 lines */ + if (vc->vc_par[0] < vc->vc_par[1] && + vc->vc_par[1] <= vc->vc_rows) { + vc->vc_top = vc->vc_par[0] - 1; + vc->vc_bottom = vc->vc_par[1]; + gotoxay(vc, 0, 0); + } + return; + case 's': + save_cur(vc); + return; + case 'u': + restore_cur(vc); + return; + case 'X': + csi_X(vc, vc->vc_par[0]); + return; + case '@': + csi_at(vc, vc->vc_par[0]); + return; + case ']': /* setterm functions */ + setterm_command(vc); + return; + } + return; + case EScsiignore: + if (c >= 20 && c <= 0x3f) + return; + vc->vc_state = ESnormal; + return; + case ESpercent: + vc->vc_state = ESnormal; + switch (c) { + case '@': /* defined in ISO 2022 */ + vc->vc_utf = 0; + return; + case 'G': /* prelim official escape code */ + case '8': /* retained for compatibility */ + vc->vc_utf = 1; + return; + } + return; + case ESfunckey: + vc->vc_state = ESnormal; + return; + case EShash: + vc->vc_state = ESnormal; + if (c == '8') { + /* DEC screen alignment test. kludge :-) */ + vc->vc_video_erase_char = + (vc->vc_video_erase_char & 0xff00) | 'E'; + csi_J(vc, 2); + vc->vc_video_erase_char = + (vc->vc_video_erase_char & 0xff00) | ' '; + do_update_region(vc, vc->vc_origin, vc->vc_screenbuf_size / 2); + } + return; + case ESsetG0: + vc_setGx(vc, 0, c); + vc->vc_state = ESnormal; + return; + case ESsetG1: + vc_setGx(vc, 1, c); + vc->vc_state = ESnormal; + return; + case ESapc: + return; + case ESosc: + return; + case ESpm: + return; + case ESdcs: + return; + default: + vc->vc_state = ESnormal; + } +} + +/* is_double_width() is based on the wcwidth() implementation by + * Markus Kuhn -- 2007-05-26 (Unicode 5.0) + * Latest version: https://www.cl.cam.ac.uk/~mgk25/ucs/wcwidth.c + */ +struct interval { + uint32_t first; + uint32_t last; +}; + +static int ucs_cmp(const void *key, const void *elt) +{ + uint32_t ucs = *(uint32_t *)key; + struct interval e = *(struct interval *) elt; + + if (ucs > e.last) + return 1; + else if (ucs < e.first) + return -1; + return 0; +} + +static int is_double_width(uint32_t ucs) +{ + static const struct interval double_width[] = { + { 0x1100, 0x115F }, { 0x2329, 0x232A }, { 0x2E80, 0x303E }, + { 0x3040, 0xA4CF }, { 0xAC00, 0xD7A3 }, { 0xF900, 0xFAFF }, + { 0xFE10, 0xFE19 }, { 0xFE30, 0xFE6F }, { 0xFF00, 0xFF60 }, + { 0xFFE0, 0xFFE6 }, { 0x20000, 0x2FFFD }, { 0x30000, 0x3FFFD } + }; + if (ucs < double_width[0].first || + ucs > double_width[ARRAY_SIZE(double_width) - 1].last) + return 0; + + return bsearch(&ucs, double_width, ARRAY_SIZE(double_width), + sizeof(struct interval), ucs_cmp) != NULL; +} + +struct vc_draw_region { + unsigned long from, to; + int x; +}; + +static void con_flush(struct vc_data *vc, struct vc_draw_region *draw) +{ + if (draw->x < 0) + return; + + vc->vc_sw->con_putcs(vc, (u16 *)draw->from, + (u16 *)draw->to - (u16 *)draw->from, vc->state.y, + draw->x); + draw->x = -1; +} + +static inline int vc_translate_ascii(const struct vc_data *vc, int c) +{ + if (IS_ENABLED(CONFIG_CONSOLE_TRANSLATIONS)) { + if (vc->vc_toggle_meta) + c |= 0x80; + + return vc->vc_translate[c]; + } + + return c; +} + + +/** + * vc_sanitize_unicode -- Replace invalid Unicode code points with U+FFFD + * @c: the received character, or U+FFFD for invalid sequences. + */ +static inline int vc_sanitize_unicode(const int c) +{ + if ((c >= 0xd800 && c <= 0xdfff) || c == 0xfffe || c == 0xffff) + return 0xfffd; + + return c; +} + +/** + * vc_translate_unicode -- Combine UTF-8 into Unicode in @vc_utf_char + * @vc: virtual console + * @c: character to translate + * @rescan: we return true if we need more (continuation) data + * + * @vc_utf_char is the being-constructed unicode character. + * @vc_utf_count is the number of continuation bytes still expected to arrive. + * @vc_npar is the number of continuation bytes arrived so far. + */ +static int vc_translate_unicode(struct vc_data *vc, int c, bool *rescan) +{ + static const u32 utf8_length_changes[] = { + 0x0000007f, 0x000007ff, 0x0000ffff, + 0x001fffff, 0x03ffffff, 0x7fffffff + }; + + /* Continuation byte received */ + if ((c & 0xc0) == 0x80) { + /* Unexpected continuation byte? */ + if (!vc->vc_utf_count) + return 0xfffd; + + vc->vc_utf_char = (vc->vc_utf_char << 6) | (c & 0x3f); + vc->vc_npar++; + if (--vc->vc_utf_count) + goto need_more_bytes; + + /* Got a whole character */ + c = vc->vc_utf_char; + /* Reject overlong sequences */ + if (c <= utf8_length_changes[vc->vc_npar - 1] || + c > utf8_length_changes[vc->vc_npar]) + return 0xfffd; + + return vc_sanitize_unicode(c); + } + + /* Single ASCII byte or first byte of a sequence received */ + if (vc->vc_utf_count) { + /* Continuation byte expected */ + *rescan = true; + vc->vc_utf_count = 0; + return 0xfffd; + } + + /* Nothing to do if an ASCII byte was received */ + if (c <= 0x7f) + return c; + + /* First byte of a multibyte sequence received */ + vc->vc_npar = 0; + if ((c & 0xe0) == 0xc0) { + vc->vc_utf_count = 1; + vc->vc_utf_char = (c & 0x1f); + } else if ((c & 0xf0) == 0xe0) { + vc->vc_utf_count = 2; + vc->vc_utf_char = (c & 0x0f); + } else if ((c & 0xf8) == 0xf0) { + vc->vc_utf_count = 3; + vc->vc_utf_char = (c & 0x07); + } else if ((c & 0xfc) == 0xf8) { + vc->vc_utf_count = 4; + vc->vc_utf_char = (c & 0x03); + } else if ((c & 0xfe) == 0xfc) { + vc->vc_utf_count = 5; + vc->vc_utf_char = (c & 0x01); + } else { + /* 254 and 255 are invalid */ + return 0xfffd; + } + +need_more_bytes: + return -1; +} + +static int vc_translate(struct vc_data *vc, int *c, bool *rescan) +{ + /* Do no translation at all in control states */ + if (vc->vc_state != ESnormal) + return *c; + + if (vc->vc_utf && !vc->vc_disp_ctrl) + return *c = vc_translate_unicode(vc, *c, rescan); + + /* no utf or alternate charset mode */ + return vc_translate_ascii(vc, *c); +} + +static inline unsigned char vc_invert_attr(const struct vc_data *vc) +{ + if (!vc->vc_can_do_color) + return vc->vc_attr ^ 0x08; + + if (vc->vc_hi_font_mask == 0x100) + return (vc->vc_attr & 0x11) | + ((vc->vc_attr & 0xe0) >> 4) | + ((vc->vc_attr & 0x0e) << 4); + + return (vc->vc_attr & 0x88) | + ((vc->vc_attr & 0x70) >> 4) | + ((vc->vc_attr & 0x07) << 4); +} + +static bool vc_is_control(struct vc_data *vc, int tc, int c) +{ + /* + * A bitmap for codes <32. A bit of 1 indicates that the code + * corresponding to that bit number invokes some special action (such + * as cursor movement) and should not be displayed as a glyph unless + * the disp_ctrl mode is explicitly enabled. + */ + static const u32 CTRL_ACTION = 0x0d00ff81; + /* Cannot be overridden by disp_ctrl */ + static const u32 CTRL_ALWAYS = 0x0800f501; + + if (vc->vc_state != ESnormal) + return true; + + if (!tc) + return true; + + /* + * If the original code was a control character we only allow a glyph + * to be displayed if the code is not normally used (such as for cursor + * movement) or if the disp_ctrl mode has been explicitly enabled. + * Certain characters (as given by the CTRL_ALWAYS bitmap) are always + * displayed as control characters, as the console would be pretty + * useless without them; to display an arbitrary font position use the + * direct-to-font zone in UTF-8 mode. + */ + if (c < 32) { + if (vc->vc_disp_ctrl) + return CTRL_ALWAYS & BIT(c); + else + return vc->vc_utf || (CTRL_ACTION & BIT(c)); + } + + if (c == 127 && !vc->vc_disp_ctrl) + return true; + + if (c == 128 + 27) + return true; + + return false; +} + +static int vc_con_write_normal(struct vc_data *vc, int tc, int c, + struct vc_draw_region *draw) +{ + int next_c; + unsigned char vc_attr = vc->vc_attr; + u16 himask = vc->vc_hi_font_mask, charmask = himask ? 0x1ff : 0xff; + u8 width = 1; + bool inverse = false; + + if (vc->vc_utf && !vc->vc_disp_ctrl) { + if (is_double_width(c)) + width = 2; + } + + /* Now try to find out how to display it */ + tc = conv_uni_to_pc(vc, tc); + if (tc & ~charmask) { + if (tc == -1 || tc == -2) + return -1; /* nothing to display */ + + /* Glyph not found */ + if ((!vc->vc_utf || vc->vc_disp_ctrl || c < 128) && + !(c & ~charmask)) { + /* + * In legacy mode use the glyph we get by a 1:1 + * mapping. + * This would make absolutely no sense with Unicode in + * mind, but do this for ASCII characters since a font + * may lack Unicode mapping info and we don't want to + * end up with having question marks only. + */ + tc = c; + } else { + /* + * Display U+FFFD. If it's not found, display an inverse + * question mark. + */ + tc = conv_uni_to_pc(vc, 0xfffd); + if (tc < 0) { + inverse = true; + tc = conv_uni_to_pc(vc, '?'); + if (tc < 0) + tc = '?'; + + vc_attr = vc_invert_attr(vc); + con_flush(vc, draw); + } + } + } + + next_c = c; + while (1) { + if (vc->vc_need_wrap || vc->vc_decim) + con_flush(vc, draw); + if (vc->vc_need_wrap) { + cr(vc); + lf(vc); + } + if (vc->vc_decim) + insert_char(vc, 1); + vc_uniscr_putc(vc, next_c); + + if (himask) + tc = ((tc & 0x100) ? himask : 0) | + (tc & 0xff); + tc |= (vc_attr << 8) & ~himask; + + scr_writew(tc, (u16 *)vc->vc_pos); + + if (con_should_update(vc) && draw->x < 0) { + draw->x = vc->state.x; + draw->from = vc->vc_pos; + } + if (vc->state.x == vc->vc_cols - 1) { + vc->vc_need_wrap = vc->vc_decawm; + draw->to = vc->vc_pos + 2; + } else { + vc->state.x++; + draw->to = (vc->vc_pos += 2); + } + + if (!--width) + break; + + /* A space is printed in the second column */ + tc = conv_uni_to_pc(vc, ' '); + if (tc < 0) + tc = ' '; + next_c = ' '; + } + notify_write(vc, c); + + if (inverse) + con_flush(vc, draw); + + return 0; +} + +/* acquires console_lock */ +static int do_con_write(struct tty_struct *tty, const unsigned char *buf, int count) +{ + struct vc_draw_region draw = { + .x = -1, + }; + int c, tc, n = 0; + unsigned int currcons; + struct vc_data *vc; + struct vt_notifier_param param; + bool rescan; + + if (in_interrupt()) + return count; + + console_lock(); + vc = tty->driver_data; + if (vc == NULL) { + pr_err("vt: argh, driver_data is NULL !\n"); + console_unlock(); + return 0; + } + + currcons = vc->vc_num; + if (!vc_cons_allocated(currcons)) { + /* could this happen? */ + pr_warn_once("con_write: tty %d not allocated\n", currcons+1); + console_unlock(); + return 0; + } + + + /* undraw cursor first */ + if (con_is_fg(vc)) + hide_cursor(vc); + + param.vc = vc; + + while (!tty->stopped && count) { + int orig = *buf; + buf++; + n++; + count--; +rescan_last_byte: + c = orig; + rescan = false; + + tc = vc_translate(vc, &c, &rescan); + if (tc == -1) + continue; + + param.c = tc; + if (atomic_notifier_call_chain(&vt_notifier_list, VT_PREWRITE, + ¶m) == NOTIFY_STOP) + continue; + + if (vc_is_control(vc, tc, c)) { + con_flush(vc, &draw); + do_con_trol(tty, vc, orig); + continue; + } + + if (vc_con_write_normal(vc, tc, c, &draw) < 0) + continue; + + if (rescan) + goto rescan_last_byte; + } + con_flush(vc, &draw); + vc_uniscr_debug_check(vc); + console_conditional_schedule(); + notify_update(vc); + console_unlock(); + return n; +} + +/* + * This is the console switching callback. + * + * Doing console switching in a process context allows + * us to do the switches asynchronously (needed when we want + * to switch due to a keyboard interrupt). Synchronization + * with other console code and prevention of re-entrancy is + * ensured with console_lock. + */ +static void console_callback(struct work_struct *ignored) +{ + console_lock(); + + if (want_console >= 0) { + if (want_console != fg_console && + vc_cons_allocated(want_console)) { + hide_cursor(vc_cons[fg_console].d); + change_console(vc_cons[want_console].d); + /* we only changed when the console had already + been allocated - a new console is not created + in an interrupt routine */ + } + want_console = -1; + } + if (do_poke_blanked_console) { /* do not unblank for a LED change */ + do_poke_blanked_console = 0; + poke_blanked_console(); + } + if (scrollback_delta) { + struct vc_data *vc = vc_cons[fg_console].d; + clear_selection(); + if (vc->vc_mode == KD_TEXT && vc->vc_sw->con_scrolldelta) + vc->vc_sw->con_scrolldelta(vc, scrollback_delta); + scrollback_delta = 0; + } + if (blank_timer_expired) { + do_blank_screen(0); + blank_timer_expired = 0; + } + notify_update(vc_cons[fg_console].d); + + console_unlock(); +} + +int set_console(int nr) +{ + struct vc_data *vc = vc_cons[fg_console].d; + + if (!vc_cons_allocated(nr) || vt_dont_switch || + (vc->vt_mode.mode == VT_AUTO && vc->vc_mode == KD_GRAPHICS)) { + + /* + * Console switch will fail in console_callback() or + * change_console() so there is no point scheduling + * the callback + * + * Existing set_console() users don't check the return + * value so this shouldn't break anything + */ + return -EINVAL; + } + + want_console = nr; + schedule_console_callback(); + + return 0; +} + +struct tty_driver *console_driver; + +#ifdef CONFIG_VT_CONSOLE + +/** + * vt_kmsg_redirect() - Sets/gets the kernel message console + * @new: The new virtual terminal number or -1 if the console should stay + * unchanged + * + * By default, the kernel messages are always printed on the current virtual + * console. However, the user may modify that default with the + * TIOCL_SETKMSGREDIRECT ioctl call. + * + * This function sets the kernel message console to be @new. It returns the old + * virtual console number. The virtual terminal number 0 (both as parameter and + * return value) means no redirection (i.e. always printed on the currently + * active console). + * + * The parameter -1 means that only the current console is returned, but the + * value is not modified. You may use the macro vt_get_kmsg_redirect() in that + * case to make the code more understandable. + * + * When the kernel is compiled without CONFIG_VT_CONSOLE, this function ignores + * the parameter and always returns 0. + */ +int vt_kmsg_redirect(int new) +{ + static int kmsg_con; + + if (new != -1) + return xchg(&kmsg_con, new); + else + return kmsg_con; +} + +/* + * Console on virtual terminal + * + * The console must be locked when we get here. + */ + +static void vt_console_print(struct console *co, const char *b, unsigned count) +{ + struct vc_data *vc = vc_cons[fg_console].d; + unsigned char c; + static DEFINE_SPINLOCK(printing_lock); + const ushort *start; + ushort start_x, cnt; + int kmsg_console; + + /* console busy or not yet initialized */ + if (!printable) + return; + if (!spin_trylock(&printing_lock)) + return; + + kmsg_console = vt_get_kmsg_redirect(); + if (kmsg_console && vc_cons_allocated(kmsg_console - 1)) + vc = vc_cons[kmsg_console - 1].d; + + if (!vc_cons_allocated(fg_console)) { + /* impossible */ + /* printk("vt_console_print: tty %d not allocated ??\n", currcons+1); */ + goto quit; + } + + if (vc->vc_mode != KD_TEXT) + goto quit; + + /* undraw cursor first */ + if (con_is_fg(vc)) + hide_cursor(vc); + + start = (ushort *)vc->vc_pos; + start_x = vc->state.x; + cnt = 0; + while (count--) { + c = *b++; + if (c == 10 || c == 13 || c == 8 || vc->vc_need_wrap) { + if (cnt && con_is_visible(vc)) + vc->vc_sw->con_putcs(vc, start, cnt, vc->state.y, start_x); + cnt = 0; + if (c == 8) { /* backspace */ + bs(vc); + start = (ushort *)vc->vc_pos; + start_x = vc->state.x; + continue; + } + if (c != 13) + lf(vc); + cr(vc); + start = (ushort *)vc->vc_pos; + start_x = vc->state.x; + if (c == 10 || c == 13) + continue; + } + vc_uniscr_putc(vc, c); + scr_writew((vc->vc_attr << 8) + c, (unsigned short *)vc->vc_pos); + notify_write(vc, c); + cnt++; + if (vc->state.x == vc->vc_cols - 1) { + vc->vc_need_wrap = 1; + } else { + vc->vc_pos += 2; + vc->state.x++; + } + } + if (cnt && con_is_visible(vc)) + vc->vc_sw->con_putcs(vc, start, cnt, vc->state.y, start_x); + set_cursor(vc); + notify_update(vc); + +quit: + spin_unlock(&printing_lock); +} + +static struct tty_driver *vt_console_device(struct console *c, int *index) +{ + *index = c->index ? c->index-1 : fg_console; + return console_driver; +} + +static struct console vt_console_driver = { + .name = "tty", + .write = vt_console_print, + .device = vt_console_device, + .unblank = unblank_screen, + .flags = CON_PRINTBUFFER, + .index = -1, +}; +#endif + +/* + * Handling of Linux-specific VC ioctls + */ + +/* + * Generally a bit racy with respect to console_lock();. + * + * There are some functions which don't need it. + * + * There are some functions which can sleep for arbitrary periods + * (paste_selection) but we don't need the lock there anyway. + * + * set_selection_user has locking, and definitely needs it + */ + +int tioclinux(struct tty_struct *tty, unsigned long arg) +{ + char type, data; + char __user *p = (char __user *)arg; + int lines; + int ret; + + if (current->signal->tty != tty && !capable(CAP_SYS_ADMIN)) + return -EPERM; + if (get_user(type, p)) + return -EFAULT; + ret = 0; + + switch (type) + { + case TIOCL_SETSEL: + ret = set_selection_user((struct tiocl_selection + __user *)(p+1), tty); + break; + case TIOCL_PASTESEL: + ret = paste_selection(tty); + break; + case TIOCL_UNBLANKSCREEN: + console_lock(); + unblank_screen(); + console_unlock(); + break; + case TIOCL_SELLOADLUT: + console_lock(); + ret = sel_loadlut(p); + console_unlock(); + break; + case TIOCL_GETSHIFTSTATE: + + /* + * Make it possible to react to Shift+Mousebutton. + * Note that 'shift_state' is an undocumented + * kernel-internal variable; programs not closely + * related to the kernel should not use this. + */ + data = vt_get_shift_state(); + ret = put_user(data, p); + break; + case TIOCL_GETMOUSEREPORTING: + console_lock(); /* May be overkill */ + data = mouse_reporting(); + console_unlock(); + ret = put_user(data, p); + break; + case TIOCL_SETVESABLANK: + console_lock(); + ret = set_vesa_blanking(p); + console_unlock(); + break; + case TIOCL_GETKMSGREDIRECT: + data = vt_get_kmsg_redirect(); + ret = put_user(data, p); + break; + case TIOCL_SETKMSGREDIRECT: + if (!capable(CAP_SYS_ADMIN)) { + ret = -EPERM; + } else { + if (get_user(data, p+1)) + ret = -EFAULT; + else + vt_kmsg_redirect(data); + } + break; + case TIOCL_GETFGCONSOLE: + /* No locking needed as this is a transiently + correct return anyway if the caller hasn't + disabled switching */ + ret = fg_console; + break; + case TIOCL_SCROLLCONSOLE: + if (get_user(lines, (s32 __user *)(p+4))) { + ret = -EFAULT; + } else { + /* Need the console lock here. Note that lots + of other calls need fixing before the lock + is actually useful ! */ + console_lock(); + scrollfront(vc_cons[fg_console].d, lines); + console_unlock(); + ret = 0; + } + break; + case TIOCL_BLANKSCREEN: /* until explicitly unblanked, not only poked */ + console_lock(); + ignore_poke = 1; + do_blank_screen(0); + console_unlock(); + break; + case TIOCL_BLANKEDSCREEN: + ret = console_blanked; + break; + default: + ret = -EINVAL; + break; + } + return ret; +} + +/* + * /dev/ttyN handling + */ + +static int con_write(struct tty_struct *tty, const unsigned char *buf, int count) +{ + int retval; + + retval = do_con_write(tty, buf, count); + con_flush_chars(tty); + + return retval; +} + +static int con_put_char(struct tty_struct *tty, unsigned char ch) +{ + if (in_interrupt()) + return 0; /* n_r3964 calls put_char() from interrupt context */ + return do_con_write(tty, &ch, 1); +} + +static int con_write_room(struct tty_struct *tty) +{ + if (tty->stopped) + return 0; + return 32768; /* No limit, really; we're not buffering */ +} + +static int con_chars_in_buffer(struct tty_struct *tty) +{ + return 0; /* we're not buffering */ +} + +/* + * con_throttle and con_unthrottle are only used for + * paste_selection(), which has to stuff in a large number of + * characters... + */ +static void con_throttle(struct tty_struct *tty) +{ +} + +static void con_unthrottle(struct tty_struct *tty) +{ + struct vc_data *vc = tty->driver_data; + + wake_up_interruptible(&vc->paste_wait); +} + +/* + * Turn the Scroll-Lock LED on when the tty is stopped + */ +static void con_stop(struct tty_struct *tty) +{ + int console_num; + if (!tty) + return; + console_num = tty->index; + if (!vc_cons_allocated(console_num)) + return; + vt_kbd_con_stop(console_num); +} + +/* + * Turn the Scroll-Lock LED off when the console is started + */ +static void con_start(struct tty_struct *tty) +{ + int console_num; + if (!tty) + return; + console_num = tty->index; + if (!vc_cons_allocated(console_num)) + return; + vt_kbd_con_start(console_num); +} + +static void con_flush_chars(struct tty_struct *tty) +{ + struct vc_data *vc; + + if (in_interrupt()) /* from flush_to_ldisc */ + return; + + /* if we race with con_close(), vt may be null */ + console_lock(); + vc = tty->driver_data; + if (vc) + set_cursor(vc); + console_unlock(); +} + +/* + * Allocate the console screen memory. + */ +static int con_install(struct tty_driver *driver, struct tty_struct *tty) +{ + unsigned int currcons = tty->index; + struct vc_data *vc; + int ret; + + console_lock(); + ret = vc_allocate(currcons); + if (ret) + goto unlock; + + vc = vc_cons[currcons].d; + + /* Still being freed */ + if (vc->port.tty) { + ret = -ERESTARTSYS; + goto unlock; + } + + ret = tty_port_install(&vc->port, driver, tty); + if (ret) + goto unlock; + + tty->driver_data = vc; + vc->port.tty = tty; + tty_port_get(&vc->port); + + if (!tty->winsize.ws_row && !tty->winsize.ws_col) { + tty->winsize.ws_row = vc_cons[currcons].d->vc_rows; + tty->winsize.ws_col = vc_cons[currcons].d->vc_cols; + } + if (vc->vc_utf) + tty->termios.c_iflag |= IUTF8; + else + tty->termios.c_iflag &= ~IUTF8; +unlock: + console_unlock(); + return ret; +} + +static int con_open(struct tty_struct *tty, struct file *filp) +{ + /* everything done in install */ + return 0; +} + + +static void con_close(struct tty_struct *tty, struct file *filp) +{ + /* Nothing to do - we defer to shutdown */ +} + +static void con_shutdown(struct tty_struct *tty) +{ + struct vc_data *vc = tty->driver_data; + BUG_ON(vc == NULL); + console_lock(); + vc->port.tty = NULL; + console_unlock(); +} + +static void con_cleanup(struct tty_struct *tty) +{ + struct vc_data *vc = tty->driver_data; + + tty_port_put(&vc->port); +} + +static int default_color = 7; /* white */ +static int default_italic_color = 2; // green (ASCII) +static int default_underline_color = 3; // cyan (ASCII) +module_param_named(color, default_color, int, S_IRUGO | S_IWUSR); +module_param_named(italic, default_italic_color, int, S_IRUGO | S_IWUSR); +module_param_named(underline, default_underline_color, int, S_IRUGO | S_IWUSR); + +static void vc_init(struct vc_data *vc, unsigned int rows, + unsigned int cols, int do_clear) +{ + int j, k ; + + vc->vc_cols = cols; + vc->vc_rows = rows; + vc->vc_size_row = cols << 1; + vc->vc_screenbuf_size = vc->vc_rows * vc->vc_size_row; + + set_origin(vc); + vc->vc_pos = vc->vc_origin; + reset_vc(vc); + for (j=k=0; j<16; j++) { + vc->vc_palette[k++] = default_red[j] ; + vc->vc_palette[k++] = default_grn[j] ; + vc->vc_palette[k++] = default_blu[j] ; + } + vc->vc_def_color = default_color; + vc->vc_ulcolor = default_underline_color; + vc->vc_itcolor = default_italic_color; + vc->vc_halfcolor = 0x08; /* grey */ + init_waitqueue_head(&vc->paste_wait); + reset_terminal(vc, do_clear); +} + +/* + * This routine initializes console interrupts, and does nothing + * else. If you want the screen to clear, call tty_write with + * the appropriate escape-sequence. + */ + +static int __init con_init(void) +{ + const char *display_desc = NULL; + struct vc_data *vc; + unsigned int currcons = 0, i; + + console_lock(); + + if (!conswitchp) + conswitchp = &dummy_con; + display_desc = conswitchp->con_startup(); + if (!display_desc) { + fg_console = 0; + console_unlock(); + return 0; + } + + for (i = 0; i < MAX_NR_CON_DRIVER; i++) { + struct con_driver *con_driver = ®istered_con_driver[i]; + + if (con_driver->con == NULL) { + con_driver->con = conswitchp; + con_driver->desc = display_desc; + con_driver->flag = CON_DRIVER_FLAG_INIT; + con_driver->first = 0; + con_driver->last = MAX_NR_CONSOLES - 1; + break; + } + } + + for (i = 0; i < MAX_NR_CONSOLES; i++) + con_driver_map[i] = conswitchp; + + if (blankinterval) { + blank_state = blank_normal_wait; + mod_timer(&console_timer, jiffies + (blankinterval * HZ)); + } + + for (currcons = 0; currcons < MIN_NR_CONSOLES; currcons++) { + vc_cons[currcons].d = vc = kzalloc(sizeof(struct vc_data), GFP_NOWAIT); + INIT_WORK(&vc_cons[currcons].SAK_work, vc_SAK); + tty_port_init(&vc->port); + visual_init(vc, currcons, 1); + /* Assuming vc->vc_{cols,rows,screenbuf_size} are sane here. */ + vc->vc_screenbuf = kzalloc(vc->vc_screenbuf_size, GFP_NOWAIT); + vc_init(vc, vc->vc_rows, vc->vc_cols, + currcons || !vc->vc_sw->con_save_screen); + } + currcons = fg_console = 0; + master_display_fg = vc = vc_cons[currcons].d; + set_origin(vc); + save_screen(vc); + gotoxy(vc, vc->state.x, vc->state.y); + csi_J(vc, 0); + update_screen(vc); + pr_info("Console: %s %s %dx%d\n", + vc->vc_can_do_color ? "colour" : "mono", + display_desc, vc->vc_cols, vc->vc_rows); + printable = 1; + + console_unlock(); + +#ifdef CONFIG_VT_CONSOLE + register_console(&vt_console_driver); +#endif + return 0; +} +console_initcall(con_init); + +static const struct tty_operations con_ops = { + .install = con_install, + .open = con_open, + .close = con_close, + .write = con_write, + .write_room = con_write_room, + .put_char = con_put_char, + .flush_chars = con_flush_chars, + .chars_in_buffer = con_chars_in_buffer, + .ioctl = vt_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = vt_compat_ioctl, +#endif + .stop = con_stop, + .start = con_start, + .throttle = con_throttle, + .unthrottle = con_unthrottle, + .resize = vt_resize, + .shutdown = con_shutdown, + .cleanup = con_cleanup, +}; + +static struct cdev vc0_cdev; + +static ssize_t show_tty_active(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "tty%d\n", fg_console + 1); +} +static DEVICE_ATTR(active, S_IRUGO, show_tty_active, NULL); + +static struct attribute *vt_dev_attrs[] = { + &dev_attr_active.attr, + NULL +}; + +ATTRIBUTE_GROUPS(vt_dev); + +int __init vty_init(const struct file_operations *console_fops) +{ + cdev_init(&vc0_cdev, console_fops); + if (cdev_add(&vc0_cdev, MKDEV(TTY_MAJOR, 0), 1) || + register_chrdev_region(MKDEV(TTY_MAJOR, 0), 1, "/dev/vc/0") < 0) + panic("Couldn't register /dev/tty0 driver\n"); + tty0dev = device_create_with_groups(tty_class, NULL, + MKDEV(TTY_MAJOR, 0), NULL, + vt_dev_groups, "tty0"); + if (IS_ERR(tty0dev)) + tty0dev = NULL; + + vcs_init(); + + console_driver = alloc_tty_driver(MAX_NR_CONSOLES); + if (!console_driver) + panic("Couldn't allocate console driver\n"); + + console_driver->name = "tty"; + console_driver->name_base = 1; + console_driver->major = TTY_MAJOR; + console_driver->minor_start = 1; + console_driver->type = TTY_DRIVER_TYPE_CONSOLE; + console_driver->init_termios = tty_std_termios; + if (default_utf8) + console_driver->init_termios.c_iflag |= IUTF8; + console_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_RESET_TERMIOS; + tty_set_operations(console_driver, &con_ops); + if (tty_register_driver(console_driver)) + panic("Couldn't register console driver\n"); + kbd_init(); + console_map_init(); +#ifdef CONFIG_MDA_CONSOLE + mda_console_init(); +#endif + return 0; +} + +#ifndef VT_SINGLE_DRIVER + +static struct class *vtconsole_class; + +static int do_bind_con_driver(const struct consw *csw, int first, int last, + int deflt) +{ + struct module *owner = csw->owner; + const char *desc = NULL; + struct con_driver *con_driver; + int i, j = -1, k = -1, retval = -ENODEV; + + if (!try_module_get(owner)) + return -ENODEV; + + WARN_CONSOLE_UNLOCKED(); + + /* check if driver is registered */ + for (i = 0; i < MAX_NR_CON_DRIVER; i++) { + con_driver = ®istered_con_driver[i]; + + if (con_driver->con == csw) { + desc = con_driver->desc; + retval = 0; + break; + } + } + + if (retval) + goto err; + + if (!(con_driver->flag & CON_DRIVER_FLAG_INIT)) { + csw->con_startup(); + con_driver->flag |= CON_DRIVER_FLAG_INIT; + } + + if (deflt) { + if (conswitchp) + module_put(conswitchp->owner); + + __module_get(owner); + conswitchp = csw; + } + + first = max(first, con_driver->first); + last = min(last, con_driver->last); + + for (i = first; i <= last; i++) { + int old_was_color; + struct vc_data *vc = vc_cons[i].d; + + if (con_driver_map[i]) + module_put(con_driver_map[i]->owner); + __module_get(owner); + con_driver_map[i] = csw; + + if (!vc || !vc->vc_sw) + continue; + + j = i; + + if (con_is_visible(vc)) { + k = i; + save_screen(vc); + } + + old_was_color = vc->vc_can_do_color; + vc->vc_sw->con_deinit(vc); + vc->vc_origin = (unsigned long)vc->vc_screenbuf; + visual_init(vc, i, 0); + set_origin(vc); + update_attr(vc); + + /* If the console changed between mono <-> color, then + * the attributes in the screenbuf will be wrong. The + * following resets all attributes to something sane. + */ + if (old_was_color != vc->vc_can_do_color) + clear_buffer_attributes(vc); + } + + pr_info("Console: switching "); + if (!deflt) + pr_cont("consoles %d-%d ", first + 1, last + 1); + if (j >= 0) { + struct vc_data *vc = vc_cons[j].d; + + pr_cont("to %s %s %dx%d\n", + vc->vc_can_do_color ? "colour" : "mono", + desc, vc->vc_cols, vc->vc_rows); + + if (k >= 0) { + vc = vc_cons[k].d; + update_screen(vc); + } + } else { + pr_cont("to %s\n", desc); + } + + retval = 0; +err: + module_put(owner); + return retval; +}; + + +#ifdef CONFIG_VT_HW_CONSOLE_BINDING +int do_unbind_con_driver(const struct consw *csw, int first, int last, int deflt) +{ + struct module *owner = csw->owner; + const struct consw *defcsw = NULL; + struct con_driver *con_driver = NULL, *con_back = NULL; + int i, retval = -ENODEV; + + if (!try_module_get(owner)) + return -ENODEV; + + WARN_CONSOLE_UNLOCKED(); + + /* check if driver is registered and if it is unbindable */ + for (i = 0; i < MAX_NR_CON_DRIVER; i++) { + con_driver = ®istered_con_driver[i]; + + if (con_driver->con == csw && + con_driver->flag & CON_DRIVER_FLAG_MODULE) { + retval = 0; + break; + } + } + + if (retval) + goto err; + + retval = -ENODEV; + + /* check if backup driver exists */ + for (i = 0; i < MAX_NR_CON_DRIVER; i++) { + con_back = ®istered_con_driver[i]; + + if (con_back->con && con_back->con != csw) { + defcsw = con_back->con; + retval = 0; + break; + } + } + + if (retval) + goto err; + + if (!con_is_bound(csw)) + goto err; + + first = max(first, con_driver->first); + last = min(last, con_driver->last); + + for (i = first; i <= last; i++) { + if (con_driver_map[i] == csw) { + module_put(csw->owner); + con_driver_map[i] = NULL; + } + } + + if (!con_is_bound(defcsw)) { + const struct consw *defconsw = conswitchp; + + defcsw->con_startup(); + con_back->flag |= CON_DRIVER_FLAG_INIT; + /* + * vgacon may change the default driver to point + * to dummycon, we restore it here... + */ + conswitchp = defconsw; + } + + if (!con_is_bound(csw)) + con_driver->flag &= ~CON_DRIVER_FLAG_INIT; + + /* ignore return value, binding should not fail */ + do_bind_con_driver(defcsw, first, last, deflt); +err: + module_put(owner); + return retval; + +} +EXPORT_SYMBOL_GPL(do_unbind_con_driver); + +static int vt_bind(struct con_driver *con) +{ + const struct consw *defcsw = NULL, *csw = NULL; + int i, more = 1, first = -1, last = -1, deflt = 0; + + if (!con->con || !(con->flag & CON_DRIVER_FLAG_MODULE)) + goto err; + + csw = con->con; + + for (i = 0; i < MAX_NR_CON_DRIVER; i++) { + struct con_driver *con = ®istered_con_driver[i]; + + if (con->con && !(con->flag & CON_DRIVER_FLAG_MODULE)) { + defcsw = con->con; + break; + } + } + + if (!defcsw) + goto err; + + while (more) { + more = 0; + + for (i = con->first; i <= con->last; i++) { + if (con_driver_map[i] == defcsw) { + if (first == -1) + first = i; + last = i; + more = 1; + } else if (first != -1) + break; + } + + if (first == 0 && last == MAX_NR_CONSOLES -1) + deflt = 1; + + if (first != -1) + do_bind_con_driver(csw, first, last, deflt); + + first = -1; + last = -1; + deflt = 0; + } + +err: + return 0; +} + +static int vt_unbind(struct con_driver *con) +{ + const struct consw *csw = NULL; + int i, more = 1, first = -1, last = -1, deflt = 0; + int ret; + + if (!con->con || !(con->flag & CON_DRIVER_FLAG_MODULE)) + goto err; + + csw = con->con; + + while (more) { + more = 0; + + for (i = con->first; i <= con->last; i++) { + if (con_driver_map[i] == csw) { + if (first == -1) + first = i; + last = i; + more = 1; + } else if (first != -1) + break; + } + + if (first == 0 && last == MAX_NR_CONSOLES -1) + deflt = 1; + + if (first != -1) { + ret = do_unbind_con_driver(csw, first, last, deflt); + if (ret != 0) + return ret; + } + + first = -1; + last = -1; + deflt = 0; + } + +err: + return 0; +} +#else +static inline int vt_bind(struct con_driver *con) +{ + return 0; +} +static inline int vt_unbind(struct con_driver *con) +{ + return 0; +} +#endif /* CONFIG_VT_HW_CONSOLE_BINDING */ + +static ssize_t store_bind(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct con_driver *con = dev_get_drvdata(dev); + int bind = simple_strtoul(buf, NULL, 0); + + console_lock(); + + if (bind) + vt_bind(con); + else + vt_unbind(con); + + console_unlock(); + + return count; +} + +static ssize_t show_bind(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct con_driver *con = dev_get_drvdata(dev); + int bind; + + console_lock(); + bind = con_is_bound(con->con); + console_unlock(); + + return snprintf(buf, PAGE_SIZE, "%i\n", bind); +} + +static ssize_t show_name(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct con_driver *con = dev_get_drvdata(dev); + + return snprintf(buf, PAGE_SIZE, "%s %s\n", + (con->flag & CON_DRIVER_FLAG_MODULE) ? "(M)" : "(S)", + con->desc); + +} + +static DEVICE_ATTR(bind, S_IRUGO|S_IWUSR, show_bind, store_bind); +static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); + +static struct attribute *con_dev_attrs[] = { + &dev_attr_bind.attr, + &dev_attr_name.attr, + NULL +}; + +ATTRIBUTE_GROUPS(con_dev); + +static int vtconsole_init_device(struct con_driver *con) +{ + con->flag |= CON_DRIVER_FLAG_ATTR; + return 0; +} + +static void vtconsole_deinit_device(struct con_driver *con) +{ + con->flag &= ~CON_DRIVER_FLAG_ATTR; +} + +/** + * con_is_bound - checks if driver is bound to the console + * @csw: console driver + * + * RETURNS: zero if unbound, nonzero if bound + * + * Drivers can call this and if zero, they should release + * all resources allocated on con_startup() + */ +int con_is_bound(const struct consw *csw) +{ + int i, bound = 0; + + WARN_CONSOLE_UNLOCKED(); + + for (i = 0; i < MAX_NR_CONSOLES; i++) { + if (con_driver_map[i] == csw) { + bound = 1; + break; + } + } + + return bound; +} +EXPORT_SYMBOL(con_is_bound); + +/** + * con_is_visible - checks whether the current console is visible + * @vc: virtual console + * + * RETURNS: zero if not visible, nonzero if visible + */ +bool con_is_visible(const struct vc_data *vc) +{ + WARN_CONSOLE_UNLOCKED(); + + return *vc->vc_display_fg == vc; +} +EXPORT_SYMBOL(con_is_visible); + +/** + * con_debug_enter - prepare the console for the kernel debugger + * @vc: virtual console + * + * Called when the console is taken over by the kernel debugger, this + * function needs to save the current console state, then put the console + * into a state suitable for the kernel debugger. + * + * RETURNS: + * Zero on success, nonzero if a failure occurred when trying to prepare + * the console for the debugger. + */ +int con_debug_enter(struct vc_data *vc) +{ + int ret = 0; + + saved_fg_console = fg_console; + saved_last_console = last_console; + saved_want_console = want_console; + saved_vc_mode = vc->vc_mode; + saved_console_blanked = console_blanked; + vc->vc_mode = KD_TEXT; + console_blanked = 0; + if (vc->vc_sw->con_debug_enter) + ret = vc->vc_sw->con_debug_enter(vc); +#ifdef CONFIG_KGDB_KDB + /* Set the initial LINES variable if it is not already set */ + if (vc->vc_rows < 999) { + int linecount; + char lns[4]; + const char *setargs[3] = { + "set", + "LINES", + lns, + }; + if (kdbgetintenv(setargs[0], &linecount)) { + snprintf(lns, 4, "%i", vc->vc_rows); + kdb_set(2, setargs); + } + } + if (vc->vc_cols < 999) { + int colcount; + char cols[4]; + const char *setargs[3] = { + "set", + "COLUMNS", + cols, + }; + if (kdbgetintenv(setargs[0], &colcount)) { + snprintf(cols, 4, "%i", vc->vc_cols); + kdb_set(2, setargs); + } + } +#endif /* CONFIG_KGDB_KDB */ + return ret; +} +EXPORT_SYMBOL_GPL(con_debug_enter); + +/** + * con_debug_leave - restore console state + * + * Restore the console state to what it was before the kernel debugger + * was invoked. + * + * RETURNS: + * Zero on success, nonzero if a failure occurred when trying to restore + * the console. + */ +int con_debug_leave(void) +{ + struct vc_data *vc; + int ret = 0; + + fg_console = saved_fg_console; + last_console = saved_last_console; + want_console = saved_want_console; + console_blanked = saved_console_blanked; + vc_cons[fg_console].d->vc_mode = saved_vc_mode; + + vc = vc_cons[fg_console].d; + if (vc->vc_sw->con_debug_leave) + ret = vc->vc_sw->con_debug_leave(vc); + return ret; +} +EXPORT_SYMBOL_GPL(con_debug_leave); + +static int do_register_con_driver(const struct consw *csw, int first, int last) +{ + struct module *owner = csw->owner; + struct con_driver *con_driver; + const char *desc; + int i, retval; + + WARN_CONSOLE_UNLOCKED(); + + if (!try_module_get(owner)) + return -ENODEV; + + for (i = 0; i < MAX_NR_CON_DRIVER; i++) { + con_driver = ®istered_con_driver[i]; + + /* already registered */ + if (con_driver->con == csw) { + retval = -EBUSY; + goto err; + } + } + + desc = csw->con_startup(); + if (!desc) { + retval = -ENODEV; + goto err; + } + + retval = -EINVAL; + + for (i = 0; i < MAX_NR_CON_DRIVER; i++) { + con_driver = ®istered_con_driver[i]; + + if (con_driver->con == NULL && + !(con_driver->flag & CON_DRIVER_FLAG_ZOMBIE)) { + con_driver->con = csw; + con_driver->desc = desc; + con_driver->node = i; + con_driver->flag = CON_DRIVER_FLAG_MODULE | + CON_DRIVER_FLAG_INIT; + con_driver->first = first; + con_driver->last = last; + retval = 0; + break; + } + } + + if (retval) + goto err; + + con_driver->dev = + device_create_with_groups(vtconsole_class, NULL, + MKDEV(0, con_driver->node), + con_driver, con_dev_groups, + "vtcon%i", con_driver->node); + if (IS_ERR(con_driver->dev)) { + pr_warn("Unable to create device for %s; errno = %ld\n", + con_driver->desc, PTR_ERR(con_driver->dev)); + con_driver->dev = NULL; + } else { + vtconsole_init_device(con_driver); + } + +err: + module_put(owner); + return retval; +} + + +/** + * do_unregister_con_driver - unregister console driver from console layer + * @csw: console driver + * + * DESCRIPTION: All drivers that registers to the console layer must + * call this function upon exit, or if the console driver is in a state + * where it won't be able to handle console services, such as the + * framebuffer console without loaded framebuffer drivers. + * + * The driver must unbind first prior to unregistration. + */ +int do_unregister_con_driver(const struct consw *csw) +{ + int i; + + /* cannot unregister a bound driver */ + if (con_is_bound(csw)) + return -EBUSY; + + if (csw == conswitchp) + return -EINVAL; + + for (i = 0; i < MAX_NR_CON_DRIVER; i++) { + struct con_driver *con_driver = ®istered_con_driver[i]; + + if (con_driver->con == csw) { + /* + * Defer the removal of the sysfs entries since that + * will acquire the kernfs s_active lock and we can't + * acquire this lock while holding the console lock: + * the unbind sysfs entry imposes already the opposite + * order. Reset con already here to prevent any later + * lookup to succeed and mark this slot as zombie, so + * it won't get reused until we complete the removal + * in the deferred work. + */ + con_driver->con = NULL; + con_driver->flag = CON_DRIVER_FLAG_ZOMBIE; + schedule_work(&con_driver_unregister_work); + + return 0; + } + } + + return -ENODEV; +} +EXPORT_SYMBOL_GPL(do_unregister_con_driver); + +static void con_driver_unregister_callback(struct work_struct *ignored) +{ + int i; + + console_lock(); + + for (i = 0; i < MAX_NR_CON_DRIVER; i++) { + struct con_driver *con_driver = ®istered_con_driver[i]; + + if (!(con_driver->flag & CON_DRIVER_FLAG_ZOMBIE)) + continue; + + console_unlock(); + + vtconsole_deinit_device(con_driver); + device_destroy(vtconsole_class, MKDEV(0, con_driver->node)); + + console_lock(); + + if (WARN_ON_ONCE(con_driver->con)) + con_driver->con = NULL; + con_driver->desc = NULL; + con_driver->dev = NULL; + con_driver->node = 0; + WARN_ON_ONCE(con_driver->flag != CON_DRIVER_FLAG_ZOMBIE); + con_driver->flag = 0; + con_driver->first = 0; + con_driver->last = 0; + } + + console_unlock(); +} + +/* + * If we support more console drivers, this function is used + * when a driver wants to take over some existing consoles + * and become default driver for newly opened ones. + * + * do_take_over_console is basically a register followed by bind + */ +int do_take_over_console(const struct consw *csw, int first, int last, int deflt) +{ + int err; + + err = do_register_con_driver(csw, first, last); + /* + * If we get an busy error we still want to bind the console driver + * and return success, as we may have unbound the console driver + * but not unregistered it. + */ + if (err == -EBUSY) + err = 0; + if (!err) + do_bind_con_driver(csw, first, last, deflt); + + return err; +} +EXPORT_SYMBOL_GPL(do_take_over_console); + + +/* + * give_up_console is a wrapper to unregister_con_driver. It will only + * work if driver is fully unbound. + */ +void give_up_console(const struct consw *csw) +{ + console_lock(); + do_unregister_con_driver(csw); + console_unlock(); +} + +static int __init vtconsole_class_init(void) +{ + int i; + + vtconsole_class = class_create(THIS_MODULE, "vtconsole"); + if (IS_ERR(vtconsole_class)) { + pr_warn("Unable to create vt console class; errno = %ld\n", + PTR_ERR(vtconsole_class)); + vtconsole_class = NULL; + } + + /* Add system drivers to sysfs */ + for (i = 0; i < MAX_NR_CON_DRIVER; i++) { + struct con_driver *con = ®istered_con_driver[i]; + + if (con->con && !con->dev) { + con->dev = + device_create_with_groups(vtconsole_class, NULL, + MKDEV(0, con->node), + con, con_dev_groups, + "vtcon%i", con->node); + + if (IS_ERR(con->dev)) { + pr_warn("Unable to create device for %s; errno = %ld\n", + con->desc, PTR_ERR(con->dev)); + con->dev = NULL; + } else { + vtconsole_init_device(con); + } + } + } + + return 0; +} +postcore_initcall(vtconsole_class_init); + +#endif + +/* + * Screen blanking + */ + +static int set_vesa_blanking(char __user *p) +{ + unsigned int mode; + + if (get_user(mode, p + 1)) + return -EFAULT; + + vesa_blank_mode = (mode < 4) ? mode : 0; + return 0; +} + +void do_blank_screen(int entering_gfx) +{ + struct vc_data *vc = vc_cons[fg_console].d; + int i; + + might_sleep(); + + WARN_CONSOLE_UNLOCKED(); + + if (console_blanked) { + if (blank_state == blank_vesa_wait) { + blank_state = blank_off; + vc->vc_sw->con_blank(vc, vesa_blank_mode + 1, 0); + } + return; + } + + /* entering graphics mode? */ + if (entering_gfx) { + hide_cursor(vc); + save_screen(vc); + vc->vc_sw->con_blank(vc, -1, 1); + console_blanked = fg_console + 1; + blank_state = blank_off; + set_origin(vc); + return; + } + + blank_state = blank_off; + + /* don't blank graphics */ + if (vc->vc_mode != KD_TEXT) { + console_blanked = fg_console + 1; + return; + } + + hide_cursor(vc); + del_timer_sync(&console_timer); + blank_timer_expired = 0; + + save_screen(vc); + /* In case we need to reset origin, blanking hook returns 1 */ + i = vc->vc_sw->con_blank(vc, vesa_off_interval ? 1 : (vesa_blank_mode + 1), 0); + console_blanked = fg_console + 1; + if (i) + set_origin(vc); + + if (console_blank_hook && console_blank_hook(1)) + return; + + if (vesa_off_interval && vesa_blank_mode) { + blank_state = blank_vesa_wait; + mod_timer(&console_timer, jiffies + vesa_off_interval); + } + vt_event_post(VT_EVENT_BLANK, vc->vc_num, vc->vc_num); +} +EXPORT_SYMBOL(do_blank_screen); + +/* + * Called by timer as well as from vt_console_driver + */ +void do_unblank_screen(int leaving_gfx) +{ + struct vc_data *vc; + + /* This should now always be called from a "sane" (read: can schedule) + * context for the sake of the low level drivers, except in the special + * case of oops_in_progress + */ + if (!oops_in_progress) + might_sleep(); + + WARN_CONSOLE_UNLOCKED(); + + ignore_poke = 0; + if (!console_blanked) + return; + if (!vc_cons_allocated(fg_console)) { + /* impossible */ + pr_warn("unblank_screen: tty %d not allocated ??\n", + fg_console + 1); + return; + } + vc = vc_cons[fg_console].d; + if (vc->vc_mode != KD_TEXT) + return; /* but leave console_blanked != 0 */ + + if (blankinterval) { + mod_timer(&console_timer, jiffies + (blankinterval * HZ)); + blank_state = blank_normal_wait; + } + + console_blanked = 0; + if (vc->vc_sw->con_blank(vc, 0, leaving_gfx)) + /* Low-level driver cannot restore -> do it ourselves */ + update_screen(vc); + if (console_blank_hook) + console_blank_hook(0); + set_palette(vc); + set_cursor(vc); + vt_event_post(VT_EVENT_UNBLANK, vc->vc_num, vc->vc_num); +} +EXPORT_SYMBOL(do_unblank_screen); + +/* + * This is called by the outside world to cause a forced unblank, mostly for + * oopses. Currently, I just call do_unblank_screen(0), but we could eventually + * call it with 1 as an argument and so force a mode restore... that may kill + * X or at least garbage the screen but would also make the Oops visible... + */ +void unblank_screen(void) +{ + do_unblank_screen(0); +} + +/* + * We defer the timer blanking to work queue so it can take the console mutex + * (console operations can still happen at irq time, but only from printk which + * has the console mutex. Not perfect yet, but better than no locking + */ +static void blank_screen_t(struct timer_list *unused) +{ + blank_timer_expired = 1; + schedule_work(&console_work); +} + +void poke_blanked_console(void) +{ + WARN_CONSOLE_UNLOCKED(); + + /* Add this so we quickly catch whoever might call us in a non + * safe context. Nowadays, unblank_screen() isn't to be called in + * atomic contexts and is allowed to schedule (with the special case + * of oops_in_progress, but that isn't of any concern for this + * function. --BenH. + */ + might_sleep(); + + /* This isn't perfectly race free, but a race here would be mostly harmless, + * at worse, we'll do a spurrious blank and it's unlikely + */ + del_timer(&console_timer); + blank_timer_expired = 0; + + if (ignore_poke || !vc_cons[fg_console].d || vc_cons[fg_console].d->vc_mode == KD_GRAPHICS) + return; + if (console_blanked) + unblank_screen(); + else if (blankinterval) { + mod_timer(&console_timer, jiffies + (blankinterval * HZ)); + blank_state = blank_normal_wait; + } +} + +/* + * Palettes + */ + +static void set_palette(struct vc_data *vc) +{ + WARN_CONSOLE_UNLOCKED(); + + if (vc->vc_mode != KD_GRAPHICS && vc->vc_sw->con_set_palette) + vc->vc_sw->con_set_palette(vc, color_table); +} + +/* + * Load palette into the DAC registers. arg points to a colour + * map, 3 bytes per colour, 16 colours, range from 0 to 255. + */ + +int con_set_cmap(unsigned char __user *arg) +{ + int i, j, k; + unsigned char colormap[3*16]; + + if (copy_from_user(colormap, arg, sizeof(colormap))) + return -EFAULT; + + console_lock(); + for (i = k = 0; i < 16; i++) { + default_red[i] = colormap[k++]; + default_grn[i] = colormap[k++]; + default_blu[i] = colormap[k++]; + } + for (i = 0; i < MAX_NR_CONSOLES; i++) { + if (!vc_cons_allocated(i)) + continue; + for (j = k = 0; j < 16; j++) { + vc_cons[i].d->vc_palette[k++] = default_red[j]; + vc_cons[i].d->vc_palette[k++] = default_grn[j]; + vc_cons[i].d->vc_palette[k++] = default_blu[j]; + } + set_palette(vc_cons[i].d); + } + console_unlock(); + + return 0; +} + +int con_get_cmap(unsigned char __user *arg) +{ + int i, k; + unsigned char colormap[3*16]; + + console_lock(); + for (i = k = 0; i < 16; i++) { + colormap[k++] = default_red[i]; + colormap[k++] = default_grn[i]; + colormap[k++] = default_blu[i]; + } + console_unlock(); + + if (copy_to_user(arg, colormap, sizeof(colormap))) + return -EFAULT; + + return 0; +} + +void reset_palette(struct vc_data *vc) +{ + int j, k; + for (j=k=0; j<16; j++) { + vc->vc_palette[k++] = default_red[j]; + vc->vc_palette[k++] = default_grn[j]; + vc->vc_palette[k++] = default_blu[j]; + } + set_palette(vc); +} + +/* + * Font switching + * + * Currently we only support fonts up to 32 pixels wide, at a maximum height + * of 32 pixels. Userspace fontdata is stored with 32 bytes (shorts/ints, + * depending on width) reserved for each character which is kinda wasty, but + * this is done in order to maintain compatibility with the EGA/VGA fonts. It + * is up to the actual low-level console-driver convert data into its favorite + * format (maybe we should add a `fontoffset' field to the `display' + * structure so we won't have to convert the fontdata all the time. + * /Jes + */ + +#define max_font_size 65536 + +static int con_font_get(struct vc_data *vc, struct console_font_op *op) +{ + struct console_font font; + int rc = -EINVAL; + int c; + + if (op->data) { + font.data = kmalloc(max_font_size, GFP_KERNEL); + if (!font.data) + return -ENOMEM; + } else + font.data = NULL; + + console_lock(); + if (vc->vc_mode != KD_TEXT) + rc = -EINVAL; + else if (vc->vc_sw->con_font_get) + rc = vc->vc_sw->con_font_get(vc, &font); + else + rc = -ENOSYS; + console_unlock(); + + if (rc) + goto out; + + c = (font.width+7)/8 * 32 * font.charcount; + + if (op->data && font.charcount > op->charcount) + rc = -ENOSPC; + if (font.width > op->width || font.height > op->height) + rc = -ENOSPC; + if (rc) + goto out; + + op->height = font.height; + op->width = font.width; + op->charcount = font.charcount; + + if (op->data && copy_to_user(op->data, font.data, c)) + rc = -EFAULT; + +out: + kfree(font.data); + return rc; +} + +static int con_font_set(struct vc_data *vc, struct console_font_op *op) +{ + struct console_font font; + int rc = -EINVAL; + int size; + + if (vc->vc_mode != KD_TEXT) + return -EINVAL; + if (!op->data) + return -EINVAL; + if (op->charcount > 512) + return -EINVAL; + if (op->width <= 0 || op->width > 32 || !op->height || op->height > 32) + return -EINVAL; + size = (op->width+7)/8 * 32 * op->charcount; + if (size > max_font_size) + return -ENOSPC; + + font.data = memdup_user(op->data, size); + if (IS_ERR(font.data)) + return PTR_ERR(font.data); + + font.charcount = op->charcount; + font.width = op->width; + font.height = op->height; + + console_lock(); + if (vc->vc_mode != KD_TEXT) + rc = -EINVAL; + else if (vc->vc_sw->con_font_set) { + if (vc_is_sel(vc)) + clear_selection(); + rc = vc->vc_sw->con_font_set(vc, &font, op->flags); + } else + rc = -ENOSYS; + console_unlock(); + kfree(font.data); + return rc; +} + +static int con_font_default(struct vc_data *vc, struct console_font_op *op) +{ + struct console_font font = {.width = op->width, .height = op->height}; + char name[MAX_FONT_NAME]; + char *s = name; + int rc; + + + if (!op->data) + s = NULL; + else if (strncpy_from_user(name, op->data, MAX_FONT_NAME - 1) < 0) + return -EFAULT; + else + name[MAX_FONT_NAME - 1] = 0; + + console_lock(); + if (vc->vc_mode != KD_TEXT) { + console_unlock(); + return -EINVAL; + } + if (vc->vc_sw->con_font_default) { + if (vc_is_sel(vc)) + clear_selection(); + rc = vc->vc_sw->con_font_default(vc, &font, s); + } else + rc = -ENOSYS; + console_unlock(); + if (!rc) { + op->width = font.width; + op->height = font.height; + } + return rc; +} + +int con_font_op(struct vc_data *vc, struct console_font_op *op) +{ + switch (op->op) { + case KD_FONT_OP_SET: + return con_font_set(vc, op); + case KD_FONT_OP_GET: + return con_font_get(vc, op); + case KD_FONT_OP_SET_DEFAULT: + return con_font_default(vc, op); + case KD_FONT_OP_COPY: + /* was buggy and never really used */ + return -EINVAL; + } + return -ENOSYS; +} + +/* + * Interface exported to selection and vcs. + */ + +/* used by selection */ +u16 screen_glyph(const struct vc_data *vc, int offset) +{ + u16 w = scr_readw(screenpos(vc, offset, true)); + u16 c = w & 0xff; + + if (w & vc->vc_hi_font_mask) + c |= 0x100; + return c; +} +EXPORT_SYMBOL_GPL(screen_glyph); + +u32 screen_glyph_unicode(const struct vc_data *vc, int n) +{ + struct uni_screen *uniscr = get_vc_uniscr(vc); + + if (uniscr) + return uniscr->lines[n / vc->vc_cols][n % vc->vc_cols]; + return inverse_translate(vc, screen_glyph(vc, n * 2), 1); +} +EXPORT_SYMBOL_GPL(screen_glyph_unicode); + +/* used by vcs - note the word offset */ +unsigned short *screen_pos(const struct vc_data *vc, int w_offset, bool viewed) +{ + return screenpos(vc, 2 * w_offset, viewed); +} +EXPORT_SYMBOL_GPL(screen_pos); + +void getconsxy(const struct vc_data *vc, unsigned char xy[static 2]) +{ + /* clamp values if they don't fit */ + xy[0] = min(vc->state.x, 0xFFu); + xy[1] = min(vc->state.y, 0xFFu); +} + +void putconsxy(struct vc_data *vc, unsigned char xy[static const 2]) +{ + hide_cursor(vc); + gotoxy(vc, xy[0], xy[1]); + set_cursor(vc); +} + +u16 vcs_scr_readw(const struct vc_data *vc, const u16 *org) +{ + if ((unsigned long)org == vc->vc_pos && softcursor_original != -1) + return softcursor_original; + return scr_readw(org); +} + +void vcs_scr_writew(struct vc_data *vc, u16 val, u16 *org) +{ + scr_writew(val, org); + if ((unsigned long)org == vc->vc_pos) { + softcursor_original = -1; + add_softcursor(vc); + } +} + +void vcs_scr_updated(struct vc_data *vc) +{ + notify_update(vc); +} + +void vc_scrolldelta_helper(struct vc_data *c, int lines, + unsigned int rolled_over, void *base, unsigned int size) +{ + unsigned long ubase = (unsigned long)base; + ptrdiff_t scr_end = (void *)c->vc_scr_end - base; + ptrdiff_t vorigin = (void *)c->vc_visible_origin - base; + ptrdiff_t origin = (void *)c->vc_origin - base; + int margin = c->vc_size_row * 4; + int from, wrap, from_off, avail; + + /* Turn scrollback off */ + if (!lines) { + c->vc_visible_origin = c->vc_origin; + return; + } + + /* Do we have already enough to allow jumping from 0 to the end? */ + if (rolled_over > scr_end + margin) { + from = scr_end; + wrap = rolled_over + c->vc_size_row; + } else { + from = 0; + wrap = size; + } + + from_off = (vorigin - from + wrap) % wrap + lines * c->vc_size_row; + avail = (origin - from + wrap) % wrap; + + /* Only a little piece would be left? Show all incl. the piece! */ + if (avail < 2 * margin) + margin = 0; + if (from_off < margin) + from_off = 0; + if (from_off > avail - margin) + from_off = avail; + + c->vc_visible_origin = ubase + (from + from_off) % wrap; +} +EXPORT_SYMBOL_GPL(vc_scrolldelta_helper); + +/* + * Visible symbols for modules + */ + +EXPORT_SYMBOL(color_table); +EXPORT_SYMBOL(default_red); +EXPORT_SYMBOL(default_grn); +EXPORT_SYMBOL(default_blu); +EXPORT_SYMBOL(update_region); +EXPORT_SYMBOL(redraw_screen); +EXPORT_SYMBOL(vc_resize); +EXPORT_SYMBOL(fg_console); +EXPORT_SYMBOL(console_blank_hook); +EXPORT_SYMBOL(console_blanked); +EXPORT_SYMBOL(vc_cons); +EXPORT_SYMBOL(global_cursor_default); +#ifndef VT_SINGLE_DRIVER +EXPORT_SYMBOL(give_up_console); +#endif diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c new file mode 100644 index 000000000..b10b86e2c --- /dev/null +++ b/drivers/tty/vt/vt_ioctl.c @@ -0,0 +1,1322 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 1992 obz under the linux copyright + * + * Dynamic diacritical handling - aeb@cwi.nl - Dec 1993 + * Dynamic keymap and string allocation - aeb@cwi.nl - May 1994 + * Restrict VT switching via ioctl() - grif@cs.ucr.edu - Dec 1995 + * Some code moved for less code duplication - Andi Kleen - Mar 1997 + * Check put/get_user, cleanups - acme@conectiva.com.br - Jun 2001 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +#include +#include +#include +#include + +bool vt_dont_switch; + +static inline bool vt_in_use(unsigned int i) +{ + const struct vc_data *vc = vc_cons[i].d; + + /* + * console_lock must be held to prevent the vc from being deallocated + * while we're checking whether it's in-use. + */ + WARN_CONSOLE_UNLOCKED(); + + return vc && kref_read(&vc->port.kref) > 1; +} + +static inline bool vt_busy(int i) +{ + if (vt_in_use(i)) + return true; + if (i == fg_console) + return true; + if (vc_is_sel(vc_cons[i].d)) + return true; + + return false; +} + +/* + * Console (vt and kd) routines, as defined by USL SVR4 manual, and by + * experimentation and study of X386 SYSV handling. + * + * One point of difference: SYSV vt's are /dev/vtX, which X >= 0, and + * /dev/console is a separate ttyp. Under Linux, /dev/tty0 is /dev/console, + * and the vc start at /dev/ttyX, X >= 1. We maintain that here, so we will + * always treat our set of vt as numbered 1..MAX_NR_CONSOLES (corresponding to + * ttys 0..MAX_NR_CONSOLES-1). Explicitly naming VT 0 is illegal, but using + * /dev/tty0 (fg_console) as a target is legal, since an implicit aliasing + * to the current console is done by the main ioctl code. + */ + +#ifdef CONFIG_X86 +#include +#endif + +static void complete_change_console(struct vc_data *vc); + +/* + * User space VT_EVENT handlers + */ + +struct vt_event_wait { + struct list_head list; + struct vt_event event; + int done; +}; + +static LIST_HEAD(vt_events); +static DEFINE_SPINLOCK(vt_event_lock); +static DECLARE_WAIT_QUEUE_HEAD(vt_event_waitqueue); + +/** + * vt_event_post + * @event: the event that occurred + * @old: old console + * @new: new console + * + * Post an VT event to interested VT handlers + */ + +void vt_event_post(unsigned int event, unsigned int old, unsigned int new) +{ + struct list_head *pos, *head; + unsigned long flags; + int wake = 0; + + spin_lock_irqsave(&vt_event_lock, flags); + head = &vt_events; + + list_for_each(pos, head) { + struct vt_event_wait *ve = list_entry(pos, + struct vt_event_wait, list); + if (!(ve->event.event & event)) + continue; + ve->event.event = event; + /* kernel view is consoles 0..n-1, user space view is + console 1..n with 0 meaning current, so we must bias */ + ve->event.oldev = old + 1; + ve->event.newev = new + 1; + wake = 1; + ve->done = 1; + } + spin_unlock_irqrestore(&vt_event_lock, flags); + if (wake) + wake_up_interruptible(&vt_event_waitqueue); +} + +static void __vt_event_queue(struct vt_event_wait *vw) +{ + unsigned long flags; + /* Prepare the event */ + INIT_LIST_HEAD(&vw->list); + vw->done = 0; + /* Queue our event */ + spin_lock_irqsave(&vt_event_lock, flags); + list_add(&vw->list, &vt_events); + spin_unlock_irqrestore(&vt_event_lock, flags); +} + +static void __vt_event_wait(struct vt_event_wait *vw) +{ + /* Wait for it to pass */ + wait_event_interruptible(vt_event_waitqueue, vw->done); +} + +static void __vt_event_dequeue(struct vt_event_wait *vw) +{ + unsigned long flags; + + /* Dequeue it */ + spin_lock_irqsave(&vt_event_lock, flags); + list_del(&vw->list); + spin_unlock_irqrestore(&vt_event_lock, flags); +} + +/** + * vt_event_wait - wait for an event + * @vw: our event + * + * Waits for an event to occur which completes our vt_event_wait + * structure. On return the structure has wv->done set to 1 for success + * or 0 if some event such as a signal ended the wait. + */ + +static void vt_event_wait(struct vt_event_wait *vw) +{ + __vt_event_queue(vw); + __vt_event_wait(vw); + __vt_event_dequeue(vw); +} + +/** + * vt_event_wait_ioctl - event ioctl handler + * @event: argument to ioctl (the event) + * + * Implement the VT_WAITEVENT ioctl using the VT event interface + */ + +static int vt_event_wait_ioctl(struct vt_event __user *event) +{ + struct vt_event_wait vw; + + if (copy_from_user(&vw.event, event, sizeof(struct vt_event))) + return -EFAULT; + /* Highest supported event for now */ + if (vw.event.event & ~VT_MAX_EVENT) + return -EINVAL; + + vt_event_wait(&vw); + /* If it occurred report it */ + if (vw.done) { + if (copy_to_user(event, &vw.event, sizeof(struct vt_event))) + return -EFAULT; + return 0; + } + return -EINTR; +} + +/** + * vt_waitactive - active console wait + * @n: new console + * + * Helper for event waits. Used to implement the legacy + * event waiting ioctls in terms of events + */ + +int vt_waitactive(int n) +{ + struct vt_event_wait vw; + do { + vw.event.event = VT_EVENT_SWITCH; + __vt_event_queue(&vw); + if (n == fg_console + 1) { + __vt_event_dequeue(&vw); + break; + } + __vt_event_wait(&vw); + __vt_event_dequeue(&vw); + if (vw.done == 0) + return -EINTR; + } while (vw.event.newev != n); + return 0; +} + +/* + * these are the valid i/o ports we're allowed to change. they map all the + * video ports + */ +#define GPFIRST 0x3b4 +#define GPLAST 0x3df +#define GPNUM (GPLAST - GPFIRST + 1) + +/* + * currently, setting the mode from KD_TEXT to KD_GRAPHICS doesn't do a whole + * lot. i'm not sure if it should do any restoration of modes or what... + * + * XXX It should at least call into the driver, fbdev's definitely need to + * restore their engine state. --BenH + * + * Called with the console lock held. + */ +static int vt_kdsetmode(struct vc_data *vc, unsigned long mode) +{ + switch (mode) { + case KD_GRAPHICS: + break; + case KD_TEXT0: + case KD_TEXT1: + mode = KD_TEXT; + fallthrough; + case KD_TEXT: + break; + default: + return -EINVAL; + } + + if (vc->vc_mode == mode) + return 0; + + vc->vc_mode = mode; + if (vc->vc_num != fg_console) + return 0; + + /* explicitly blank/unblank the screen if switching modes */ + if (mode == KD_TEXT) + do_unblank_screen(1); + else + do_blank_screen(1); + + return 0; +} + +static int vt_k_ioctl(struct tty_struct *tty, unsigned int cmd, + unsigned long arg, bool perm) +{ + struct vc_data *vc = tty->driver_data; + void __user *up = (void __user *)arg; + unsigned int console = vc->vc_num; + int ret; + + switch (cmd) { + case KIOCSOUND: + if (!perm) + return -EPERM; + /* + * The use of PIT_TICK_RATE is historic, it used to be + * the platform-dependent CLOCK_TICK_RATE between 2.6.12 + * and 2.6.36, which was a minor but unfortunate ABI + * change. kd_mksound is locked by the input layer. + */ + if (arg) + arg = PIT_TICK_RATE / arg; + kd_mksound(arg, 0); + break; + + case KDMKTONE: + if (!perm) + return -EPERM; + { + unsigned int ticks, count; + + /* + * Generate the tone for the appropriate number of ticks. + * If the time is zero, turn off sound ourselves. + */ + ticks = msecs_to_jiffies((arg >> 16) & 0xffff); + count = ticks ? (arg & 0xffff) : 0; + if (count) + count = PIT_TICK_RATE / count; + kd_mksound(count, ticks); + break; + } + + case KDGKBTYPE: + /* + * this is naïve. + */ + return put_user(KB_101, (char __user *)arg); + + /* + * These cannot be implemented on any machine that implements + * ioperm() in user level (such as Alpha PCs) or not at all. + * + * XXX: you should never use these, just call ioperm directly.. + */ +#ifdef CONFIG_X86 + case KDADDIO: + case KDDELIO: + /* + * KDADDIO and KDDELIO may be able to add ports beyond what + * we reject here, but to be safe... + * + * These are locked internally via sys_ioperm + */ + if (arg < GPFIRST || arg > GPLAST) + return -EINVAL; + + return ksys_ioperm(arg, 1, (cmd == KDADDIO)) ? -ENXIO : 0; + + case KDENABIO: + case KDDISABIO: + return ksys_ioperm(GPFIRST, GPNUM, + (cmd == KDENABIO)) ? -ENXIO : 0; +#endif + + /* Linux m68k/i386 interface for setting the keyboard delay/repeat rate */ + + case KDKBDREP: + { + struct kbd_repeat kbrep; + + if (!capable(CAP_SYS_TTY_CONFIG)) + return -EPERM; + + if (copy_from_user(&kbrep, up, sizeof(struct kbd_repeat))) + return -EFAULT; + + ret = kbd_rate(&kbrep); + if (ret) + return ret; + if (copy_to_user(up, &kbrep, sizeof(struct kbd_repeat))) + return -EFAULT; + break; + } + + case KDSETMODE: + if (!perm) + return -EPERM; + + console_lock(); + ret = vt_kdsetmode(vc, arg); + console_unlock(); + return ret; + + case KDGETMODE: + return put_user(vc->vc_mode, (int __user *)arg); + + case KDMAPDISP: + case KDUNMAPDISP: + /* + * these work like a combination of mmap and KDENABIO. + * this could be easily finished. + */ + return -EINVAL; + + case KDSKBMODE: + if (!perm) + return -EPERM; + ret = vt_do_kdskbmode(console, arg); + if (ret) + return ret; + tty_ldisc_flush(tty); + break; + + case KDGKBMODE: + return put_user(vt_do_kdgkbmode(console), (int __user *)arg); + + /* this could be folded into KDSKBMODE, but for compatibility + reasons it is not so easy to fold KDGKBMETA into KDGKBMODE */ + case KDSKBMETA: + return vt_do_kdskbmeta(console, arg); + + case KDGKBMETA: + /* FIXME: should review whether this is worth locking */ + return put_user(vt_do_kdgkbmeta(console), (int __user *)arg); + + case KDGETKEYCODE: + case KDSETKEYCODE: + if(!capable(CAP_SYS_TTY_CONFIG)) + perm = 0; + return vt_do_kbkeycode_ioctl(cmd, up, perm); + + case KDGKBENT: + case KDSKBENT: + return vt_do_kdsk_ioctl(cmd, up, perm, console); + + case KDGKBSENT: + case KDSKBSENT: + return vt_do_kdgkb_ioctl(cmd, up, perm); + + /* Diacritical processing. Handled in keyboard.c as it has + to operate on the keyboard locks and structures */ + case KDGKBDIACR: + case KDGKBDIACRUC: + case KDSKBDIACR: + case KDSKBDIACRUC: + return vt_do_diacrit(cmd, up, perm); + + /* the ioctls below read/set the flags usually shown in the leds */ + /* don't use them - they will go away without warning */ + case KDGKBLED: + case KDSKBLED: + case KDGETLED: + case KDSETLED: + return vt_do_kdskled(console, cmd, arg, perm); + + /* + * A process can indicate its willingness to accept signals + * generated by pressing an appropriate key combination. + * Thus, one can have a daemon that e.g. spawns a new console + * upon a keypress and then changes to it. + * See also the kbrequest field of inittab(5). + */ + case KDSIGACCEPT: + if (!perm || !capable(CAP_KILL)) + return -EPERM; + if (!valid_signal(arg) || arg < 1 || arg == SIGKILL) + return -EINVAL; + + spin_lock_irq(&vt_spawn_con.lock); + put_pid(vt_spawn_con.pid); + vt_spawn_con.pid = get_pid(task_pid(current)); + vt_spawn_con.sig = arg; + spin_unlock_irq(&vt_spawn_con.lock); + break; + + case KDFONTOP: { + struct console_font_op op; + + if (copy_from_user(&op, up, sizeof(op))) + return -EFAULT; + if (!perm && op.op != KD_FONT_OP_GET) + return -EPERM; + ret = con_font_op(vc, &op); + if (ret) + return ret; + if (copy_to_user(up, &op, sizeof(op))) + return -EFAULT; + break; + } + + default: + return -ENOIOCTLCMD; + } + + return 0; +} + +static inline int do_unimap_ioctl(int cmd, struct unimapdesc __user *user_ud, + bool perm, struct vc_data *vc) +{ + struct unimapdesc tmp; + + if (copy_from_user(&tmp, user_ud, sizeof tmp)) + return -EFAULT; + switch (cmd) { + case PIO_UNIMAP: + if (!perm) + return -EPERM; + return con_set_unimap(vc, tmp.entry_ct, tmp.entries); + case GIO_UNIMAP: + if (!perm && fg_console != vc->vc_num) + return -EPERM; + return con_get_unimap(vc, tmp.entry_ct, &(user_ud->entry_ct), + tmp.entries); + } + return 0; +} + +static int vt_io_ioctl(struct vc_data *vc, unsigned int cmd, void __user *up, + bool perm) +{ + switch (cmd) { + case PIO_CMAP: + if (!perm) + return -EPERM; + return con_set_cmap(up); + + case GIO_CMAP: + return con_get_cmap(up); + + case PIO_SCRNMAP: + if (!perm) + return -EPERM; + return con_set_trans_old(up); + + case GIO_SCRNMAP: + return con_get_trans_old(up); + + case PIO_UNISCRNMAP: + if (!perm) + return -EPERM; + return con_set_trans_new(up); + + case GIO_UNISCRNMAP: + return con_get_trans_new(up); + + case PIO_UNIMAPCLR: + if (!perm) + return -EPERM; + con_clear_unimap(vc); + break; + + case PIO_UNIMAP: + case GIO_UNIMAP: + return do_unimap_ioctl(cmd, up, perm, vc); + + default: + return -ENOIOCTLCMD; + } + + return 0; +} + +static int vt_reldisp(struct vc_data *vc, unsigned int swtch) +{ + int newvt, ret; + + if (vc->vt_mode.mode != VT_PROCESS) + return -EINVAL; + + /* Switched-to response */ + if (vc->vt_newvt < 0) { + /* If it's just an ACK, ignore it */ + return swtch == VT_ACKACQ ? 0 : -EINVAL; + } + + /* Switching-from response */ + if (swtch == 0) { + /* Switch disallowed, so forget we were trying to do it. */ + vc->vt_newvt = -1; + return 0; + } + + /* The current vt has been released, so complete the switch. */ + newvt = vc->vt_newvt; + vc->vt_newvt = -1; + ret = vc_allocate(newvt); + if (ret) + return ret; + + /* + * When we actually do the console switch, make sure we are atomic with + * respect to other console switches.. + */ + complete_change_console(vc_cons[newvt].d); + + return 0; +} + +static int vt_setactivate(struct vt_setactivate __user *sa) +{ + struct vt_setactivate vsa; + struct vc_data *nvc; + int ret; + + if (copy_from_user(&vsa, sa, sizeof(vsa))) + return -EFAULT; + if (vsa.console == 0 || vsa.console > MAX_NR_CONSOLES) + return -ENXIO; + + vsa.console--; + vsa.console = array_index_nospec(vsa.console, MAX_NR_CONSOLES); + console_lock(); + ret = vc_allocate(vsa.console); + if (ret) { + console_unlock(); + return ret; + } + + /* + * This is safe providing we don't drop the console sem between + * vc_allocate and finishing referencing nvc. + */ + nvc = vc_cons[vsa.console].d; + nvc->vt_mode = vsa.mode; + nvc->vt_mode.frsig = 0; + put_pid(nvc->vt_pid); + nvc->vt_pid = get_pid(task_pid(current)); + console_unlock(); + + /* Commence switch and lock */ + /* Review set_console locks */ + set_console(vsa.console); + + return 0; +} + +/* deallocate a single console, if possible (leave 0) */ +static int vt_disallocate(unsigned int vc_num) +{ + struct vc_data *vc = NULL; + int ret = 0; + + console_lock(); + if (vt_busy(vc_num)) + ret = -EBUSY; + else if (vc_num) + vc = vc_deallocate(vc_num); + console_unlock(); + + if (vc && vc_num >= MIN_NR_CONSOLES) + tty_port_put(&vc->port); + + return ret; +} + +/* deallocate all unused consoles, but leave 0 */ +static void vt_disallocate_all(void) +{ + struct vc_data *vc[MAX_NR_CONSOLES]; + int i; + + console_lock(); + for (i = 1; i < MAX_NR_CONSOLES; i++) + if (!vt_busy(i)) + vc[i] = vc_deallocate(i); + else + vc[i] = NULL; + console_unlock(); + + for (i = 1; i < MAX_NR_CONSOLES; i++) { + if (vc[i] && i >= MIN_NR_CONSOLES) + tty_port_put(&vc[i]->port); + } +} + +static int vt_resizex(struct vc_data *vc, struct vt_consize __user *cs) +{ + struct vt_consize v; + int i; + + if (copy_from_user(&v, cs, sizeof(struct vt_consize))) + return -EFAULT; + + /* FIXME: Should check the copies properly */ + if (!v.v_vlin) + v.v_vlin = vc->vc_scan_lines; + + if (v.v_clin) { + int rows = v.v_vlin / v.v_clin; + if (v.v_rows != rows) { + if (v.v_rows) /* Parameters don't add up */ + return -EINVAL; + v.v_rows = rows; + } + } + + if (v.v_vcol && v.v_ccol) { + int cols = v.v_vcol / v.v_ccol; + if (v.v_cols != cols) { + if (v.v_cols) + return -EINVAL; + v.v_cols = cols; + } + } + + if (v.v_clin > 32) + return -EINVAL; + + for (i = 0; i < MAX_NR_CONSOLES; i++) { + struct vc_data *vcp; + + if (!vc_cons[i].d) + continue; + console_lock(); + vcp = vc_cons[i].d; + if (vcp) { + int ret; + int save_scan_lines = vcp->vc_scan_lines; + int save_cell_height = vcp->vc_cell_height; + + if (v.v_vlin) + vcp->vc_scan_lines = v.v_vlin; + if (v.v_clin) + vcp->vc_cell_height = v.v_clin; + vcp->vc_resize_user = 1; + ret = vc_resize(vcp, v.v_cols, v.v_rows); + if (ret) { + vcp->vc_scan_lines = save_scan_lines; + vcp->vc_cell_height = save_cell_height; + console_unlock(); + return ret; + } + } + console_unlock(); + } + + return 0; +} + +/* + * We handle the console-specific ioctl's here. We allow the + * capability to modify any console, not just the fg_console. + */ +int vt_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct vc_data *vc = tty->driver_data; + void __user *up = (void __user *)arg; + int i, perm; + int ret; + + /* + * To have permissions to do most of the vt ioctls, we either have + * to be the owner of the tty, or have CAP_SYS_TTY_CONFIG. + */ + perm = 0; + if (current->signal->tty == tty || capable(CAP_SYS_TTY_CONFIG)) + perm = 1; + + ret = vt_k_ioctl(tty, cmd, arg, perm); + if (ret != -ENOIOCTLCMD) + return ret; + + ret = vt_io_ioctl(vc, cmd, up, perm); + if (ret != -ENOIOCTLCMD) + return ret; + + switch (cmd) { + case TIOCLINUX: + return tioclinux(tty, arg); + case VT_SETMODE: + { + struct vt_mode tmp; + + if (!perm) + return -EPERM; + if (copy_from_user(&tmp, up, sizeof(struct vt_mode))) + return -EFAULT; + if (tmp.mode != VT_AUTO && tmp.mode != VT_PROCESS) + return -EINVAL; + + console_lock(); + vc->vt_mode = tmp; + /* the frsig is ignored, so we set it to 0 */ + vc->vt_mode.frsig = 0; + put_pid(vc->vt_pid); + vc->vt_pid = get_pid(task_pid(current)); + /* no switch is required -- saw@shade.msu.ru */ + vc->vt_newvt = -1; + console_unlock(); + break; + } + + case VT_GETMODE: + { + struct vt_mode tmp; + int rc; + + console_lock(); + memcpy(&tmp, &vc->vt_mode, sizeof(struct vt_mode)); + console_unlock(); + + rc = copy_to_user(up, &tmp, sizeof(struct vt_mode)); + if (rc) + return -EFAULT; + break; + } + + /* + * Returns global vt state. Note that VT 0 is always open, since + * it's an alias for the current VT, and people can't use it here. + * We cannot return state for more than 16 VTs, since v_state is short. + */ + case VT_GETSTATE: + { + struct vt_stat __user *vtstat = up; + unsigned short state, mask; + + if (put_user(fg_console + 1, &vtstat->v_active)) + return -EFAULT; + + state = 1; /* /dev/tty0 is always open */ + console_lock(); /* required by vt_in_use() */ + for (i = 0, mask = 2; i < MAX_NR_CONSOLES && mask; + ++i, mask <<= 1) + if (vt_in_use(i)) + state |= mask; + console_unlock(); + return put_user(state, &vtstat->v_state); + } + + /* + * Returns the first available (non-opened) console. + */ + case VT_OPENQRY: + console_lock(); /* required by vt_in_use() */ + for (i = 0; i < MAX_NR_CONSOLES; ++i) + if (!vt_in_use(i)) + break; + console_unlock(); + i = i < MAX_NR_CONSOLES ? (i+1) : -1; + return put_user(i, (int __user *)arg); + + /* + * ioctl(fd, VT_ACTIVATE, num) will cause us to switch to vt # num, + * with num >= 1 (switches to vt 0, our console, are not allowed, just + * to preserve sanity). + */ + case VT_ACTIVATE: + if (!perm) + return -EPERM; + if (arg == 0 || arg > MAX_NR_CONSOLES) + return -ENXIO; + + arg--; + arg = array_index_nospec(arg, MAX_NR_CONSOLES); + console_lock(); + ret = vc_allocate(arg); + console_unlock(); + if (ret) + return ret; + set_console(arg); + break; + + case VT_SETACTIVATE: + if (!perm) + return -EPERM; + + return vt_setactivate(up); + + /* + * wait until the specified VT has been activated + */ + case VT_WAITACTIVE: + if (!perm) + return -EPERM; + if (arg == 0 || arg > MAX_NR_CONSOLES) + return -ENXIO; + return vt_waitactive(arg); + + /* + * If a vt is under process control, the kernel will not switch to it + * immediately, but postpone the operation until the process calls this + * ioctl, allowing the switch to complete. + * + * According to the X sources this is the behavior: + * 0: pending switch-from not OK + * 1: pending switch-from OK + * 2: completed switch-to OK + */ + case VT_RELDISP: + if (!perm) + return -EPERM; + + console_lock(); + ret = vt_reldisp(vc, arg); + console_unlock(); + + return ret; + + + /* + * Disallocate memory associated to VT (but leave VT1) + */ + case VT_DISALLOCATE: + if (arg > MAX_NR_CONSOLES) + return -ENXIO; + + if (arg == 0) + vt_disallocate_all(); + else + return vt_disallocate(--arg); + break; + + case VT_RESIZE: + { + struct vt_sizes __user *vtsizes = up; + struct vc_data *vc; + ushort ll,cc; + + if (!perm) + return -EPERM; + if (get_user(ll, &vtsizes->v_rows) || + get_user(cc, &vtsizes->v_cols)) + return -EFAULT; + + console_lock(); + for (i = 0; i < MAX_NR_CONSOLES; i++) { + vc = vc_cons[i].d; + + if (vc) { + vc->vc_resize_user = 1; + /* FIXME: review v tty lock */ + vc_resize(vc_cons[i].d, cc, ll); + } + } + console_unlock(); + break; + } + + case VT_RESIZEX: + if (!perm) + return -EPERM; + + return vt_resizex(vc, up); + + case VT_LOCKSWITCH: + if (!capable(CAP_SYS_TTY_CONFIG)) + return -EPERM; + vt_dont_switch = true; + break; + case VT_UNLOCKSWITCH: + if (!capable(CAP_SYS_TTY_CONFIG)) + return -EPERM; + vt_dont_switch = false; + break; + case VT_GETHIFONTMASK: + return put_user(vc->vc_hi_font_mask, + (unsigned short __user *)arg); + case VT_WAITEVENT: + return vt_event_wait_ioctl((struct vt_event __user *)arg); + default: + return -ENOIOCTLCMD; + } + + return 0; +} + +void reset_vc(struct vc_data *vc) +{ + vc->vc_mode = KD_TEXT; + vt_reset_unicode(vc->vc_num); + vc->vt_mode.mode = VT_AUTO; + vc->vt_mode.waitv = 0; + vc->vt_mode.relsig = 0; + vc->vt_mode.acqsig = 0; + vc->vt_mode.frsig = 0; + put_pid(vc->vt_pid); + vc->vt_pid = NULL; + vc->vt_newvt = -1; + if (!in_interrupt()) /* Via keyboard.c:SAK() - akpm */ + reset_palette(vc); +} + +void vc_SAK(struct work_struct *work) +{ + struct vc *vc_con = + container_of(work, struct vc, SAK_work); + struct vc_data *vc; + struct tty_struct *tty; + + console_lock(); + vc = vc_con->d; + if (vc) { + /* FIXME: review tty ref counting */ + tty = vc->port.tty; + /* + * SAK should also work in all raw modes and reset + * them properly. + */ + if (tty) + __do_SAK(tty); + reset_vc(vc); + } + console_unlock(); +} + +#ifdef CONFIG_COMPAT + +struct compat_console_font_op { + compat_uint_t op; /* operation code KD_FONT_OP_* */ + compat_uint_t flags; /* KD_FONT_FLAG_* */ + compat_uint_t width, height; /* font size */ + compat_uint_t charcount; + compat_caddr_t data; /* font data with height fixed to 32 */ +}; + +static inline int +compat_kdfontop_ioctl(struct compat_console_font_op __user *fontop, + int perm, struct console_font_op *op, struct vc_data *vc) +{ + int i; + + if (copy_from_user(op, fontop, sizeof(struct compat_console_font_op))) + return -EFAULT; + if (!perm && op->op != KD_FONT_OP_GET) + return -EPERM; + op->data = compat_ptr(((struct compat_console_font_op *)op)->data); + i = con_font_op(vc, op); + if (i) + return i; + ((struct compat_console_font_op *)op)->data = (unsigned long)op->data; + if (copy_to_user(fontop, op, sizeof(struct compat_console_font_op))) + return -EFAULT; + return 0; +} + +struct compat_unimapdesc { + unsigned short entry_ct; + compat_caddr_t entries; +}; + +static inline int +compat_unimap_ioctl(unsigned int cmd, struct compat_unimapdesc __user *user_ud, + int perm, struct vc_data *vc) +{ + struct compat_unimapdesc tmp; + struct unipair __user *tmp_entries; + + if (copy_from_user(&tmp, user_ud, sizeof tmp)) + return -EFAULT; + tmp_entries = compat_ptr(tmp.entries); + switch (cmd) { + case PIO_UNIMAP: + if (!perm) + return -EPERM; + return con_set_unimap(vc, tmp.entry_ct, tmp_entries); + case GIO_UNIMAP: + if (!perm && fg_console != vc->vc_num) + return -EPERM; + return con_get_unimap(vc, tmp.entry_ct, &(user_ud->entry_ct), tmp_entries); + } + return 0; +} + +long vt_compat_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct vc_data *vc = tty->driver_data; + struct console_font_op op; /* used in multiple places here */ + void __user *up = compat_ptr(arg); + int perm; + + /* + * To have permissions to do most of the vt ioctls, we either have + * to be the owner of the tty, or have CAP_SYS_TTY_CONFIG. + */ + perm = 0; + if (current->signal->tty == tty || capable(CAP_SYS_TTY_CONFIG)) + perm = 1; + + switch (cmd) { + /* + * these need special handlers for incompatible data structures + */ + + case KDFONTOP: + return compat_kdfontop_ioctl(up, perm, &op, vc); + + case PIO_UNIMAP: + case GIO_UNIMAP: + return compat_unimap_ioctl(cmd, up, perm, vc); + + /* + * all these treat 'arg' as an integer + */ + case KIOCSOUND: + case KDMKTONE: +#ifdef CONFIG_X86 + case KDADDIO: + case KDDELIO: +#endif + case KDSETMODE: + case KDMAPDISP: + case KDUNMAPDISP: + case KDSKBMODE: + case KDSKBMETA: + case KDSKBLED: + case KDSETLED: + case KDSIGACCEPT: + case VT_ACTIVATE: + case VT_WAITACTIVE: + case VT_RELDISP: + case VT_DISALLOCATE: + case VT_RESIZE: + case VT_RESIZEX: + return vt_ioctl(tty, cmd, arg); + + /* + * the rest has a compatible data structure behind arg, + * but we have to convert it to a proper 64 bit pointer. + */ + default: + return vt_ioctl(tty, cmd, (unsigned long)up); + } +} + + +#endif /* CONFIG_COMPAT */ + + +/* + * Performs the back end of a vt switch. Called under the console + * semaphore. + */ +static void complete_change_console(struct vc_data *vc) +{ + unsigned char old_vc_mode; + int old = fg_console; + + last_console = fg_console; + + /* + * If we're switching, we could be going from KD_GRAPHICS to + * KD_TEXT mode or vice versa, which means we need to blank or + * unblank the screen later. + */ + old_vc_mode = vc_cons[fg_console].d->vc_mode; + switch_screen(vc); + + /* + * This can't appear below a successful kill_pid(). If it did, + * then the *blank_screen operation could occur while X, having + * received acqsig, is waking up on another processor. This + * condition can lead to overlapping accesses to the VGA range + * and the framebuffer (causing system lockups). + * + * To account for this we duplicate this code below only if the + * controlling process is gone and we've called reset_vc. + */ + if (old_vc_mode != vc->vc_mode) { + if (vc->vc_mode == KD_TEXT) + do_unblank_screen(1); + else + do_blank_screen(1); + } + + /* + * If this new console is under process control, send it a signal + * telling it that it has acquired. Also check if it has died and + * clean up (similar to logic employed in change_console()) + */ + if (vc->vt_mode.mode == VT_PROCESS) { + /* + * Send the signal as privileged - kill_pid() will + * tell us if the process has gone or something else + * is awry + */ + if (kill_pid(vc->vt_pid, vc->vt_mode.acqsig, 1) != 0) { + /* + * The controlling process has died, so we revert back to + * normal operation. In this case, we'll also change back + * to KD_TEXT mode. I'm not sure if this is strictly correct + * but it saves the agony when the X server dies and the screen + * remains blanked due to KD_GRAPHICS! It would be nice to do + * this outside of VT_PROCESS but there is no single process + * to account for and tracking tty count may be undesirable. + */ + reset_vc(vc); + + if (old_vc_mode != vc->vc_mode) { + if (vc->vc_mode == KD_TEXT) + do_unblank_screen(1); + else + do_blank_screen(1); + } + } + } + + /* + * Wake anyone waiting for their VT to activate + */ + vt_event_post(VT_EVENT_SWITCH, old, vc->vc_num); + return; +} + +/* + * Performs the front-end of a vt switch + */ +void change_console(struct vc_data *new_vc) +{ + struct vc_data *vc; + + if (!new_vc || new_vc->vc_num == fg_console || vt_dont_switch) + return; + + /* + * If this vt is in process mode, then we need to handshake with + * that process before switching. Essentially, we store where that + * vt wants to switch to and wait for it to tell us when it's done + * (via VT_RELDISP ioctl). + * + * We also check to see if the controlling process still exists. + * If it doesn't, we reset this vt to auto mode and continue. + * This is a cheap way to track process control. The worst thing + * that can happen is: we send a signal to a process, it dies, and + * the switch gets "lost" waiting for a response; hopefully, the + * user will try again, we'll detect the process is gone (unless + * the user waits just the right amount of time :-) and revert the + * vt to auto control. + */ + vc = vc_cons[fg_console].d; + if (vc->vt_mode.mode == VT_PROCESS) { + /* + * Send the signal as privileged - kill_pid() will + * tell us if the process has gone or something else + * is awry. + * + * We need to set vt_newvt *before* sending the signal or we + * have a race. + */ + vc->vt_newvt = new_vc->vc_num; + if (kill_pid(vc->vt_pid, vc->vt_mode.relsig, 1) == 0) { + /* + * It worked. Mark the vt to switch to and + * return. The process needs to send us a + * VT_RELDISP ioctl to complete the switch. + */ + return; + } + + /* + * The controlling process has died, so we revert back to + * normal operation. In this case, we'll also change back + * to KD_TEXT mode. I'm not sure if this is strictly correct + * but it saves the agony when the X server dies and the screen + * remains blanked due to KD_GRAPHICS! It would be nice to do + * this outside of VT_PROCESS but there is no single process + * to account for and tracking tty count may be undesirable. + */ + reset_vc(vc); + + /* + * Fall through to normal (VT_AUTO) handling of the switch... + */ + } + + /* + * Ignore all switches in KD_GRAPHICS+VT_AUTO mode + */ + if (vc->vc_mode == KD_GRAPHICS) + return; + + complete_change_console(new_vc); +} + +/* Perform a kernel triggered VT switch for suspend/resume */ + +static int disable_vt_switch; + +int vt_move_to_console(unsigned int vt, int alloc) +{ + int prev; + + console_lock(); + /* Graphics mode - up to X */ + if (disable_vt_switch) { + console_unlock(); + return 0; + } + prev = fg_console; + + if (alloc && vc_allocate(vt)) { + /* we can't have a free VC for now. Too bad, + * we don't want to mess the screen for now. */ + console_unlock(); + return -ENOSPC; + } + + if (set_console(vt)) { + /* + * We're unable to switch to the SUSPEND_CONSOLE. + * Let the calling function know so it can decide + * what to do. + */ + console_unlock(); + return -EIO; + } + console_unlock(); + if (vt_waitactive(vt + 1)) { + pr_debug("Suspend: Can't switch VCs."); + return -EINTR; + } + return prev; +} + +/* + * Normally during a suspend, we allocate a new console and switch to it. + * When we resume, we switch back to the original console. This switch + * can be slow, so on systems where the framebuffer can handle restoration + * of video registers anyways, there's little point in doing the console + * switch. This function allows you to disable it by passing it '0'. + */ +void pm_set_vt_switch(int do_switch) +{ + console_lock(); + disable_vt_switch = !do_switch; + console_unlock(); +} +EXPORT_SYMBOL(pm_set_vt_switch); -- cgit v1.2.3