From 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 12:05:51 +0200 Subject: Adding upstream version 5.10.209. Signed-off-by: Daniel Baumann --- net/hsr/hsr_slave.c | 221 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 221 insertions(+) create mode 100644 net/hsr/hsr_slave.c (limited to 'net/hsr/hsr_slave.c') diff --git a/net/hsr/hsr_slave.c b/net/hsr/hsr_slave.c new file mode 100644 index 000000000..aecc05a28 --- /dev/null +++ b/net/hsr/hsr_slave.c @@ -0,0 +1,221 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright 2011-2014 Autronica Fire and Security AS + * + * Author(s): + * 2011-2014 Arvid Brodin, arvid.brodin@alten.se + * + * Frame handler other utility functions for HSR and PRP. + */ + +#include "hsr_slave.h" +#include +#include +#include +#include "hsr_main.h" +#include "hsr_device.h" +#include "hsr_forward.h" +#include "hsr_framereg.h" + +bool hsr_invalid_dan_ingress_frame(__be16 protocol) +{ + return (protocol != htons(ETH_P_PRP) && protocol != htons(ETH_P_HSR)); +} + +static rx_handler_result_t hsr_handle_frame(struct sk_buff **pskb) +{ + struct sk_buff *skb = *pskb; + struct hsr_port *port; + struct hsr_priv *hsr; + __be16 protocol; + + /* Packets from dev_loopback_xmit() do not have L2 header, bail out */ + if (unlikely(skb->pkt_type == PACKET_LOOPBACK)) + return RX_HANDLER_PASS; + + if (!skb_mac_header_was_set(skb)) { + WARN_ONCE(1, "%s: skb invalid", __func__); + return RX_HANDLER_PASS; + } + + port = hsr_port_get_rcu(skb->dev); + if (!port) + goto finish_pass; + hsr = port->hsr; + + if (hsr_addr_is_self(port->hsr, eth_hdr(skb)->h_source)) { + /* Directly kill frames sent by ourselves */ + kfree_skb(skb); + goto finish_consume; + } + + /* For HSR, only tagged frames are expected, but for PRP + * there could be non tagged frames as well from Single + * attached nodes (SANs). + */ + protocol = eth_hdr(skb)->h_proto; + if (hsr->proto_ops->invalid_dan_ingress_frame && + hsr->proto_ops->invalid_dan_ingress_frame(protocol)) + goto finish_pass; + + skb_push(skb, ETH_HLEN); + skb_reset_mac_header(skb); + if ((!hsr->prot_version && protocol == htons(ETH_P_PRP)) || + protocol == htons(ETH_P_HSR)) + skb_set_network_header(skb, ETH_HLEN + HSR_HLEN); + skb_reset_mac_len(skb); + + hsr_forward_skb(skb, port); + +finish_consume: + return RX_HANDLER_CONSUMED; + +finish_pass: + return RX_HANDLER_PASS; +} + +bool hsr_port_exists(const struct net_device *dev) +{ + return rcu_access_pointer(dev->rx_handler) == hsr_handle_frame; +} + +static int hsr_check_dev_ok(struct net_device *dev, + struct netlink_ext_ack *extack) +{ + /* Don't allow HSR on non-ethernet like devices */ + if ((dev->flags & IFF_LOOPBACK) || dev->type != ARPHRD_ETHER || + dev->addr_len != ETH_ALEN) { + NL_SET_ERR_MSG_MOD(extack, "Cannot use loopback or non-ethernet device as HSR slave."); + return -EINVAL; + } + + /* Don't allow enslaving hsr devices */ + if (is_hsr_master(dev)) { + NL_SET_ERR_MSG_MOD(extack, + "Cannot create trees of HSR devices."); + return -EINVAL; + } + + if (hsr_port_exists(dev)) { + NL_SET_ERR_MSG_MOD(extack, + "This device is already a HSR slave."); + return -EINVAL; + } + + if (is_vlan_dev(dev)) { + NL_SET_ERR_MSG_MOD(extack, "HSR on top of VLAN is not yet supported in this driver."); + return -EINVAL; + } + + if (dev->priv_flags & IFF_DONT_BRIDGE) { + NL_SET_ERR_MSG_MOD(extack, + "This device does not support bridging."); + return -EOPNOTSUPP; + } + + /* HSR over bonded devices has not been tested, but I'm not sure it + * won't work... + */ + + return 0; +} + +/* Setup device to be added to the HSR bridge. */ +static int hsr_portdev_setup(struct hsr_priv *hsr, struct net_device *dev, + struct hsr_port *port, + struct netlink_ext_ack *extack) + +{ + struct net_device *hsr_dev; + struct hsr_port *master; + int res; + + res = dev_set_promiscuity(dev, 1); + if (res) + return res; + + master = hsr_port_get_hsr(hsr, HSR_PT_MASTER); + hsr_dev = master->dev; + + res = netdev_upper_dev_link(dev, hsr_dev, extack); + if (res) + goto fail_upper_dev_link; + + res = netdev_rx_handler_register(dev, hsr_handle_frame, port); + if (res) + goto fail_rx_handler; + dev_disable_lro(dev); + + return 0; + +fail_rx_handler: + netdev_upper_dev_unlink(dev, hsr_dev); +fail_upper_dev_link: + dev_set_promiscuity(dev, -1); + return res; +} + +int hsr_add_port(struct hsr_priv *hsr, struct net_device *dev, + enum hsr_port_type type, struct netlink_ext_ack *extack) +{ + struct hsr_port *port, *master; + int res; + + if (type != HSR_PT_MASTER) { + res = hsr_check_dev_ok(dev, extack); + if (res) + return res; + } + + port = hsr_port_get_hsr(hsr, type); + if (port) + return -EBUSY; /* This port already exists */ + + port = kzalloc(sizeof(*port), GFP_KERNEL); + if (!port) + return -ENOMEM; + + port->hsr = hsr; + port->dev = dev; + port->type = type; + + if (type != HSR_PT_MASTER) { + res = hsr_portdev_setup(hsr, dev, port, extack); + if (res) + goto fail_dev_setup; + } + + list_add_tail_rcu(&port->port_list, &hsr->ports); + synchronize_rcu(); + + master = hsr_port_get_hsr(hsr, HSR_PT_MASTER); + netdev_update_features(master->dev); + dev_set_mtu(master->dev, hsr_get_max_mtu(hsr)); + + return 0; + +fail_dev_setup: + kfree(port); + return res; +} + +void hsr_del_port(struct hsr_port *port) +{ + struct hsr_priv *hsr; + struct hsr_port *master; + + hsr = port->hsr; + master = hsr_port_get_hsr(hsr, HSR_PT_MASTER); + list_del_rcu(&port->port_list); + + if (port != master) { + netdev_update_features(master->dev); + dev_set_mtu(master->dev, hsr_get_max_mtu(hsr)); + netdev_rx_handler_unregister(port->dev); + dev_set_promiscuity(port->dev, -1); + netdev_upper_dev_unlink(port->dev, master->dev); + } + + synchronize_rcu(); + + kfree(port); +} -- cgit v1.2.3