// SPDX-License-Identifier: GPL-2.0 /* * Driver for the MMC / SD / SDIO IP found in: * * TC6393XB, TC6391XB, TC6387XB, T7L66XB, ASIC3, SH-Mobile SoCs * * Copyright (C) 2015-19 Renesas Electronics Corporation * Copyright (C) 2016-19 Sang Engineering, Wolfram Sang * Copyright (C) 2017 Horms Solutions, Simon Horman * Copyright (C) 2011 Guennadi Liakhovetski * Copyright (C) 2007 Ian Molton * Copyright (C) 2004 Ian Molton * * This driver draws mainly on scattered spec sheets, Reverse engineering * of the toshiba e800 SD driver and some parts of the 2.4 ASIC3 driver (4 bit * support). (Further 4 bit support from a later datasheet). * * TODO: * Investigate using a workqueue for PIO transfers * Eliminate FIXMEs * Better Power management * Handle MMC errors better * double buffer support * */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "tmio_mmc.h" static inline void tmio_mmc_start_dma(struct tmio_mmc_host *host, struct mmc_data *data) { if (host->dma_ops) host->dma_ops->start(host, data); } static inline void tmio_mmc_end_dma(struct tmio_mmc_host *host) { if (host->dma_ops && host->dma_ops->end) host->dma_ops->end(host); } static inline void tmio_mmc_enable_dma(struct tmio_mmc_host *host, bool enable) { if (host->dma_ops) host->dma_ops->enable(host, enable); } static inline void tmio_mmc_request_dma(struct tmio_mmc_host *host, struct tmio_mmc_data *pdata) { if (host->dma_ops) { host->dma_ops->request(host, pdata); } else { host->chan_tx = NULL; host->chan_rx = NULL; } } static inline void tmio_mmc_release_dma(struct tmio_mmc_host *host) { if (host->dma_ops) host->dma_ops->release(host); } static inline void tmio_mmc_abort_dma(struct tmio_mmc_host *host) { if (host->dma_ops) host->dma_ops->abort(host); } static inline void tmio_mmc_dataend_dma(struct tmio_mmc_host *host) { if (host->dma_ops) host->dma_ops->dataend(host); } void tmio_mmc_enable_mmc_irqs(struct tmio_mmc_host *host, u32 i) { host->sdcard_irq_mask &= ~(i & TMIO_MASK_IRQ); sd_ctrl_write32_as_16_and_16(host, CTL_IRQ_MASK, host->sdcard_irq_mask); } EXPORT_SYMBOL_GPL(tmio_mmc_enable_mmc_irqs); void tmio_mmc_disable_mmc_irqs(struct tmio_mmc_host *host, u32 i) { host->sdcard_irq_mask |= (i & TMIO_MASK_IRQ); sd_ctrl_write32_as_16_and_16(host, CTL_IRQ_MASK, host->sdcard_irq_mask); } EXPORT_SYMBOL_GPL(tmio_mmc_disable_mmc_irqs); static void tmio_mmc_ack_mmc_irqs(struct tmio_mmc_host *host, u32 i) { sd_ctrl_write32_as_16_and_16(host, CTL_STATUS, ~i); } static void tmio_mmc_init_sg(struct tmio_mmc_host *host, struct mmc_data *data) { host->sg_len = data->sg_len; host->sg_ptr = data->sg; host->sg_orig = data->sg; host->sg_off = 0; } static int tmio_mmc_next_sg(struct tmio_mmc_host *host) { host->sg_ptr = sg_next(host->sg_ptr); host->sg_off = 0; return --host->sg_len; } #define CMDREQ_TIMEOUT 5000 static void tmio_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable) { struct tmio_mmc_host *host = mmc_priv(mmc); if (enable && !host->sdio_irq_enabled) { u16 sdio_status; /* Keep device active while SDIO irq is enabled */ pm_runtime_get_sync(mmc_dev(mmc)); host->sdio_irq_enabled = true; host->sdio_irq_mask = TMIO_SDIO_MASK_ALL & ~TMIO_SDIO_STAT_IOIRQ; /* Clear obsolete interrupts before enabling */ sdio_status = sd_ctrl_read16(host, CTL_SDIO_STATUS) & ~TMIO_SDIO_MASK_ALL; if (host->pdata->flags & TMIO_MMC_SDIO_STATUS_SETBITS) sdio_status |= TMIO_SDIO_SETBITS_MASK; sd_ctrl_write16(host, CTL_SDIO_STATUS, sdio_status); sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask); } else if (!enable && host->sdio_irq_enabled) { host->sdio_irq_mask = TMIO_SDIO_MASK_ALL; sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask); host->sdio_irq_enabled = false; pm_runtime_mark_last_busy(mmc_dev(mmc)); pm_runtime_put_autosuspend(mmc_dev(mmc)); } } static void tmio_mmc_reset(struct tmio_mmc_host *host) { /* FIXME - should we set stop clock reg here */ sd_ctrl_write16(host, CTL_RESET_SD, 0x0000); usleep_range(10000, 11000); sd_ctrl_write16(host, CTL_RESET_SD, 0x0001); usleep_range(10000, 11000); if (host->reset) host->reset(host); tmio_mmc_abort_dma(host); if (host->pdata->flags & TMIO_MMC_SDIO_IRQ) { sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask); sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0001); } } static void tmio_mmc_reset_work(struct work_struct *work) { struct tmio_mmc_host *host = container_of(work, struct tmio_mmc_host, delayed_reset_work.work); struct mmc_request *mrq; unsigned long flags; spin_lock_irqsave(&host->lock, flags); mrq = host->mrq; /* * is request already finished? Since we use a non-blocking * cancel_delayed_work(), it can happen, that a .set_ios() call preempts * us, so, have to check for IS_ERR(host->mrq) */ if (IS_ERR_OR_NULL(mrq) || time_is_after_jiffies(host->last_req_ts + msecs_to_jiffies(CMDREQ_TIMEOUT))) { spin_unlock_irqrestore(&host->lock, flags); return; } dev_warn(&host->pdev->dev, "timeout waiting for hardware interrupt (CMD%u)\n", mrq->cmd->opcode); if (host->data) host->data->error = -ETIMEDOUT; else if (host->cmd) host->cmd->error = -ETIMEDOUT; else mrq->cmd->error = -ETIMEDOUT; /* No new calls yet, but disallow concurrent tmio_mmc_done_work() */ host->mrq = ERR_PTR(-EBUSY); host->cmd = NULL; host->data = NULL; spin_unlock_irqrestore(&host->lock, flags); tmio_mmc_reset(host); /* Ready for new calls */ host->mrq = NULL; mmc_request_done(host->mmc, mrq); } /* These are the bitmasks the tmio chip requires to implement the MMC response * types. Note that R1 and R6 are the same in this scheme. */ #define APP_CMD 0x0040 #define RESP_NONE 0x0300 #define RESP_R1 0x0400 #define RESP_R1B 0x0500 #define RESP_R2 0x0600 #define RESP_R3 0x0700 #define DATA_PRESENT 0x0800 #define TRANSFER_READ 0x1000 #define TRANSFER_MULTI 0x2000 #define SECURITY_CMD 0x4000 #define NO_CMD12_ISSUE 0x4000 /* TMIO_MMC_HAVE_CMD12_CTRL */ static int tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd) { struct mmc_data *data = host->data; int c = cmd->opcode; switch (mmc_resp_type(cmd)) { case MMC_RSP_NONE: c |= RESP_NONE; break; case MMC_RSP_R1: case MMC_RSP_R1_NO_CRC: c |= RESP_R1; break; case MMC_RSP_R1B: c |= RESP_R1B; break; case MMC_RSP_R2: c |= RESP_R2; break; case MMC_RSP_R3: c |= RESP_R3; break; default: pr_debug("Unknown response type %d\n", mmc_resp_type(cmd)); return -EINVAL; } host->cmd = cmd; /* FIXME - this seems to be ok commented out but the spec suggest this bit * should be set when issuing app commands. * if(cmd->flags & MMC_FLAG_ACMD) * c |= APP_CMD; */ if (data) { c |= DATA_PRESENT; if (data->blocks > 1) { sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, TMIO_STOP_SEC); c |= TRANSFER_MULTI; /* * Disable auto CMD12 at IO_RW_EXTENDED and * SET_BLOCK_COUNT when doing multiple block transfer */ if ((host->pdata->flags & TMIO_MMC_HAVE_CMD12_CTRL) && (cmd->opcode == SD_IO_RW_EXTENDED || host->mrq->sbc)) c |= NO_CMD12_ISSUE; } if (data->flags & MMC_DATA_READ) c |= TRANSFER_READ; } tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_CMD); /* Fire off the command */ sd_ctrl_write32_as_16_and_16(host, CTL_ARG_REG, cmd->arg); sd_ctrl_write16(host, CTL_SD_CMD, c); return 0; } static void tmio_mmc_transfer_data(struct tmio_mmc_host *host, unsigned short *buf, unsigned int count) { int is_read = host->data->flags & MMC_DATA_READ; u8 *buf8; /* * Transfer the data */ if (host->pdata->flags & TMIO_MMC_32BIT_DATA_PORT) { u32 data = 0; u32 *buf32 = (u32 *)buf; if (is_read) sd_ctrl_read32_rep(host, CTL_SD_DATA_PORT, buf32, count >> 2); else sd_ctrl_write32_rep(host, CTL_SD_DATA_PORT, buf32, count >> 2); /* if count was multiple of 4 */ if (!(count & 0x3)) return; buf32 += count >> 2; count %= 4; if (is_read) { sd_ctrl_read32_rep(host, CTL_SD_DATA_PORT, &data, 1); memcpy(buf32, &data, count); } else { memcpy(&data, buf32, count); sd_ctrl_write32_rep(host, CTL_SD_DATA_PORT, &data, 1); } return; } if (is_read) sd_ctrl_read16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1); else sd_ctrl_write16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1); /* if count was even number */ if (!(count & 0x1)) return; /* if count was odd number */ buf8 = (u8 *)(buf + (count >> 1)); /* * FIXME * * driver and this function are assuming that * it is used as little endian */ if (is_read) *buf8 = sd_ctrl_read16(host, CTL_SD_DATA_PORT) & 0xff; else sd_ctrl_write16(host, CTL_SD_DATA_PORT, *buf8); } /* * This chip always returns (at least?) as much data as you ask for. * I'm unsure what happens if you ask for less than a block. This should be * looked into to ensure that a funny length read doesn't hose the controller. */ static void tmio_mmc_pio_irq(struct tmio_mmc_host *host) { struct mmc_data *data = host->data; void *sg_virt; unsigned short *buf; unsigned int count; unsigned long flags; if (host->dma_on) { pr_err("PIO IRQ in DMA mode!\n"); return; } else if (!data) { pr_debug("Spurious PIO IRQ\n"); return; } sg_virt = tmio_mmc_kmap_atomic(host->sg_ptr, &flags); buf = (unsigned short *)(sg_virt + host->sg_off); count = host->sg_ptr->length - host->sg_off; if (count > data->blksz) count = data->blksz; pr_debug("count: %08x offset: %08x flags %08x\n", count, host->sg_off, data->flags); /* Transfer the data */ tmio_mmc_transfer_data(host, buf, count); host->sg_off += count; tmio_mmc_kunmap_atomic(host->sg_ptr, &flags, sg_virt); if (host->sg_off == host->sg_ptr->length) tmio_mmc_next_sg(host); } static void tmio_mmc_check_bounce_buffer(struct tmio_mmc_host *host) { if (host->sg_ptr == &host->bounce_sg) { unsigned long flags; void *sg_vaddr = tmio_mmc_kmap_atomic(host->sg_orig, &flags); memcpy(sg_vaddr, host->bounce_buf, host->bounce_sg.length); tmio_mmc_kunmap_atomic(host->sg_orig, &flags, sg_vaddr); } } /* needs to be called with host->lock held */ void tmio_mmc_do_data_irq(struct tmio_mmc_host *host) { struct mmc_data *data = host->data; struct mmc_command *stop; host->data = NULL; if (!data) { dev_warn(&host->pdev->dev, "Spurious data end IRQ\n"); return; } stop = data->stop; /* FIXME - return correct transfer count on errors */ if (!data->error) data->bytes_xfered = data->blocks * data->blksz; else data->bytes_xfered = 0; pr_debug("Completed data request\n"); /* * FIXME: other drivers allow an optional stop command of any given type * which we dont do, as the chip can auto generate them. * Perhaps we can be smarter about when to use auto CMD12 and * only issue the auto request when we know this is the desired * stop command, allowing fallback to the stop command the * upper layers expect. For now, we do what works. */ if (data->flags & MMC_DATA_READ) { if (host->dma_on) tmio_mmc_check_bounce_buffer(host); dev_dbg(&host->pdev->dev, "Complete Rx request %p\n", host->mrq); } else { dev_dbg(&host->pdev->dev, "Complete Tx request %p\n", host->mrq); } if (stop && !host->mrq->sbc) { if (stop->opcode != MMC_STOP_TRANSMISSION || stop->arg) dev_err(&host->pdev->dev, "unsupported stop: CMD%u,0x%x. We did CMD12,0\n", stop->opcode, stop->arg); /* fill in response from auto CMD12 */ stop->resp[0] = sd_ctrl_read16_and_16_as_32(host, CTL_RESPONSE); sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0); } schedule_work(&host->done); } EXPORT_SYMBOL_GPL(tmio_mmc_do_data_irq); static void tmio_mmc_data_irq(struct tmio_mmc_host *host, unsigned int stat) { struct mmc_data *data; spin_lock(&host->lock); data = host->data; if (!data) goto out; if (stat & TMIO_STAT_CRCFAIL || stat & TMIO_STAT_STOPBIT_ERR || stat & TMIO_STAT_TXUNDERRUN) data->error = -EILSEQ; if (host->dma_on && (data->flags & MMC_DATA_WRITE)) { u32 status = sd_ctrl_read16_and_16_as_32(host, CTL_STATUS); bool done = false; /* * Has all data been written out yet? Testing on SuperH showed, * that in most cases the first interrupt comes already with the * BUSY status bit clear, but on some operations, like mount or * in the beginning of a write / sync / umount, there is one * DATAEND interrupt with the BUSY bit set, in this cases * waiting for one more interrupt fixes the problem. */ if (host->pdata->flags & TMIO_MMC_HAS_IDLE_WAIT) { if (status & TMIO_STAT_SCLKDIVEN) done = true; } else { if (!(status & TMIO_STAT_CMD_BUSY)) done = true; } if (done) { tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND); tmio_mmc_dataend_dma(host); } } else if (host->dma_on && (data->flags & MMC_DATA_READ)) { tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND); tmio_mmc_dataend_dma(host); } else { tmio_mmc_do_data_irq(host); tmio_mmc_disable_mmc_irqs(host, TMIO_MASK_READOP | TMIO_MASK_WRITEOP); } out: spin_unlock(&host->lock); } static void tmio_mmc_cmd_irq(struct tmio_mmc_host *host, unsigned int stat) { struct mmc_command *cmd = host->cmd; int i, addr; spin_lock(&host->lock); if (!host->cmd) { pr_debug("Spurious CMD irq\n"); goto out; } /* This controller is sicker than the PXA one. Not only do we need to * drop the top 8 bits of the first response word, we also need to * modify the order of the response for short response command types. */ for (i = 3, addr = CTL_RESPONSE ; i >= 0 ; i--, addr += 4) cmd->resp[i] = sd_ctrl_read16_and_16_as_32(host, addr); if (cmd->flags & MMC_RSP_136) { cmd->resp[0] = (cmd->resp[0] << 8) | (cmd->resp[1] >> 24); cmd->resp[1] = (cmd->resp[1] << 8) | (cmd->resp[2] >> 24); cmd->resp[2] = (cmd->resp[2] << 8) | (cmd->resp[3] >> 24); cmd->resp[3] <<= 8; } else if (cmd->flags & MMC_RSP_R3) { cmd->resp[0] = cmd->resp[3]; } if (stat & TMIO_STAT_CMDTIMEOUT) cmd->error = -ETIMEDOUT; else if ((stat & TMIO_STAT_CRCFAIL && cmd->flags & MMC_RSP_CRC) || stat & TMIO_STAT_STOPBIT_ERR || stat & TMIO_STAT_CMD_IDX_ERR) cmd->error = -EILSEQ; /* If there is data to handle we enable data IRQs here, and * we will ultimatley finish the request in the data_end handler. * If theres no data or we encountered an error, finish now. */ if (host->data && (!cmd->error || cmd->error == -EILSEQ)) { if (host->data->flags & MMC_DATA_READ) { if (!host->dma_on) { tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_READOP); } else { tmio_mmc_disable_mmc_irqs(host, TMIO_MASK_READOP); tasklet_schedule(&host->dma_issue); } } else { if (!host->dma_on) { tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_WRITEOP); } else { tmio_mmc_disable_mmc_irqs(host, TMIO_MASK_WRITEOP); tasklet_schedule(&host->dma_issue); } } } else { schedule_work(&host->done); } out: spin_unlock(&host->lock); } static bool __tmio_mmc_card_detect_irq(struct tmio_mmc_host *host, int ireg, int status) { struct mmc_host *mmc = host->mmc; /* Card insert / remove attempts */ if (ireg & (TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE)) { tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE); if ((((ireg & TMIO_STAT_CARD_REMOVE) && mmc->card) || ((ireg & TMIO_STAT_CARD_INSERT) && !mmc->card)) && !work_pending(&mmc->detect.work)) mmc_detect_change(host->mmc, msecs_to_jiffies(100)); return true; } return false; } static bool __tmio_mmc_sdcard_irq(struct tmio_mmc_host *host, int ireg, int status) { /* Command completion */ if (ireg & (TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT)) { tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT); tmio_mmc_cmd_irq(host, status); return true; } /* Data transfer */ if (ireg & (TMIO_STAT_RXRDY | TMIO_STAT_TXRQ)) { tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_RXRDY | TMIO_STAT_TXRQ); tmio_mmc_pio_irq(host); return true; } /* Data transfer completion */ if (ireg & TMIO_STAT_DATAEND) { tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_DATAEND); tmio_mmc_data_irq(host, status); return true; } return false; } static bool __tmio_mmc_sdio_irq(struct tmio_mmc_host *host) { struct mmc_host *mmc = host->mmc; struct tmio_mmc_data *pdata = host->pdata; unsigned int ireg, status; unsigned int sdio_status; if (!(pdata->flags & TMIO_MMC_SDIO_IRQ)) return false; status = sd_ctrl_read16(host, CTL_SDIO_STATUS); ireg = status & TMIO_SDIO_MASK_ALL & ~host->sdio_irq_mask; sdio_status = status & ~TMIO_SDIO_MASK_ALL; if (pdata->flags & TMIO_MMC_SDIO_STATUS_SETBITS) sdio_status |= TMIO_SDIO_SETBITS_MASK; sd_ctrl_write16(host, CTL_SDIO_STATUS, sdio_status); if (mmc->caps & MMC_CAP_SDIO_IRQ && ireg & TMIO_SDIO_STAT_IOIRQ) mmc_signal_sdio_irq(mmc); return ireg; } irqreturn_t tmio_mmc_irq(int irq, void *devid) { struct tmio_mmc_host *host = devid; unsigned int ireg, status; status = sd_ctrl_read16_and_16_as_32(host, CTL_STATUS); ireg = status & TMIO_MASK_IRQ & ~host->sdcard_irq_mask; /* Clear the status except the interrupt status */ sd_ctrl_write32_as_16_and_16(host, CTL_STATUS, TMIO_MASK_IRQ); if (__tmio_mmc_card_detect_irq(host, ireg, status)) return IRQ_HANDLED; if (__tmio_mmc_sdcard_irq(host, ireg, status)) return IRQ_HANDLED; if (__tmio_mmc_sdio_irq(host)) return IRQ_HANDLED; return IRQ_NONE; } EXPORT_SYMBOL_GPL(tmio_mmc_irq); static int tmio_mmc_start_data(struct tmio_mmc_host *host, struct mmc_data *data) { struct tmio_mmc_data *pdata = host->pdata; pr_debug("setup data transfer: blocksize %08x nr_blocks %d\n", data->blksz, data->blocks); /* Some hardware cannot perform 2 byte requests in 4/8 bit mode */ if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4 || host->mmc->ios.bus_width == MMC_BUS_WIDTH_8) { int blksz_2bytes = pdata->flags & TMIO_MMC_BLKSZ_2BYTES; if (data->blksz < 2 || (data->blksz < 4 && !blksz_2bytes)) { pr_err("%s: %d byte block unsupported in 4/8 bit mode\n", mmc_hostname(host->mmc), data->blksz); return -EINVAL; } } tmio_mmc_init_sg(host, data); host->data = data; host->dma_on = false; /* Set transfer length / blocksize */ sd_ctrl_write16(host, CTL_SD_XFER_LEN, data->blksz); if (host->mmc->max_blk_count >= SZ_64K) sd_ctrl_write32(host, CTL_XFER_BLK_COUNT, data->blocks); else sd_ctrl_write16(host, CTL_XFER_BLK_COUNT, data->blocks); tmio_mmc_start_dma(host, data); return 0; } static void tmio_process_mrq(struct tmio_mmc_host *host, struct mmc_request *mrq) { struct mmc_command *cmd; int ret; if (mrq->sbc && host->cmd != mrq->sbc) { cmd = mrq->sbc; } else { cmd = mrq->cmd; if (mrq->data) { ret = tmio_mmc_start_data(host, mrq->data); if (ret) goto fail; } } ret = tmio_mmc_start_command(host, cmd); if (ret) goto fail; schedule_delayed_work(&host->delayed_reset_work, msecs_to_jiffies(CMDREQ_TIMEOUT)); return; fail: host->mrq = NULL; mrq->cmd->error = ret; mmc_request_done(host->mmc, mrq); } /* Process requests from the MMC layer */ static void tmio_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) { struct tmio_mmc_host *host = mmc_priv(mmc); unsigned long flags; spin_lock_irqsave(&host->lock, flags); if (host->mrq) { pr_debug("request not null\n"); if (IS_ERR(host->mrq)) { spin_unlock_irqrestore(&host->lock, flags); mrq->cmd->error = -EAGAIN; mmc_request_done(mmc, mrq); return; } } host->last_req_ts = jiffies; wmb(); host->mrq = mrq; spin_unlock_irqrestore(&host->lock, flags); tmio_process_mrq(host, mrq); } static void tmio_mmc_finish_request(struct tmio_mmc_host *host) { struct mmc_request *mrq; unsigned long flags; spin_lock_irqsave(&host->lock, flags); tmio_mmc_end_dma(host); mrq = host->mrq; if (IS_ERR_OR_NULL(mrq)) { spin_unlock_irqrestore(&host->lock, flags); return; } /* If not SET_BLOCK_COUNT, clear old data */ if (host->cmd != mrq->sbc) { host->cmd = NULL; host->data = NULL; host->mrq = NULL; } cancel_delayed_work(&host->delayed_reset_work); spin_unlock_irqrestore(&host->lock, flags); if (mrq->cmd->error || (mrq->data && mrq->data->error)) tmio_mmc_abort_dma(host); /* Error means retune, but executed command was still successful */ if (host->check_retune && host->check_retune(host)) mmc_retune_needed(host->mmc); /* If SET_BLOCK_COUNT, continue with main command */ if (host->mrq && !mrq->cmd->error) { tmio_process_mrq(host, mrq); return; } if (host->fixup_request) host->fixup_request(host, mrq); mmc_request_done(host->mmc, mrq); } static void tmio_mmc_done_work(struct work_struct *work) { struct tmio_mmc_host *host = container_of(work, struct tmio_mmc_host, done); tmio_mmc_finish_request(host); } static void tmio_mmc_power_on(struct tmio_mmc_host *host, unsigned short vdd) { struct mmc_host *mmc = host->mmc; int ret = 0; /* .set_ios() is returning void, so, no chance to report an error */ if (host->set_pwr) host->set_pwr(host->pdev, 1); if (!IS_ERR(mmc->supply.vmmc)) { ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd); /* * Attention: empiric value. With a b43 WiFi SDIO card this * delay proved necessary for reliable card-insertion probing. * 100us were not enough. Is this the same 140us delay, as in * tmio_mmc_set_ios()? */ usleep_range(200, 300); } /* * It seems, VccQ should be switched on after Vcc, this is also what the * omap_hsmmc.c driver does. */ if (!IS_ERR(mmc->supply.vqmmc) && !ret) { ret = regulator_enable(mmc->supply.vqmmc); usleep_range(200, 300); } if (ret < 0) dev_dbg(&host->pdev->dev, "Regulators failed to power up: %d\n", ret); } static void tmio_mmc_power_off(struct tmio_mmc_host *host) { struct mmc_host *mmc = host->mmc; if (!IS_ERR(mmc->supply.vqmmc)) regulator_disable(mmc->supply.vqmmc); if (!IS_ERR(mmc->supply.vmmc)) mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0); if (host->set_pwr) host->set_pwr(host->pdev, 0); } static void tmio_mmc_set_bus_width(struct tmio_mmc_host *host, unsigned char bus_width) { u16 reg = sd_ctrl_read16(host, CTL_SD_MEM_CARD_OPT) & ~(CARD_OPT_WIDTH | CARD_OPT_WIDTH8); /* reg now applies to MMC_BUS_WIDTH_4 */ if (bus_width == MMC_BUS_WIDTH_1) reg |= CARD_OPT_WIDTH; else if (bus_width == MMC_BUS_WIDTH_8) reg |= CARD_OPT_WIDTH8; sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, reg); } /* Set MMC clock / power. * Note: This controller uses a simple divider scheme therefore it cannot * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as * MMC wont run that fast, it has to be clocked at 12MHz which is the next * slowest setting. */ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) { struct tmio_mmc_host *host = mmc_priv(mmc); struct device *dev = &host->pdev->dev; unsigned long flags; mutex_lock(&host->ios_lock); spin_lock_irqsave(&host->lock, flags); if (host->mrq) { if (IS_ERR(host->mrq)) { dev_dbg(dev, "%s.%d: concurrent .set_ios(), clk %u, mode %u\n", current->comm, task_pid_nr(current), ios->clock, ios->power_mode); host->mrq = ERR_PTR(-EINTR); } else { dev_dbg(dev, "%s.%d: CMD%u active since %lu, now %lu!\n", current->comm, task_pid_nr(current), host->mrq->cmd->opcode, host->last_req_ts, jiffies); } spin_unlock_irqrestore(&host->lock, flags); mutex_unlock(&host->ios_lock); return; } host->mrq = ERR_PTR(-EBUSY); spin_unlock_irqrestore(&host->lock, flags); switch (ios->power_mode) { case MMC_POWER_OFF: tmio_mmc_power_off(host); /* For R-Car Gen2+, we need to reset SDHI specific SCC */ if (host->pdata->flags & TMIO_MMC_MIN_RCAR2) host->reset(host); host->set_clock(host, 0); break; case MMC_POWER_UP: tmio_mmc_power_on(host, ios->vdd); host->set_clock(host, ios->clock); tmio_mmc_set_bus_width(host, ios->bus_width); break; case MMC_POWER_ON: host->set_clock(host, ios->clock); tmio_mmc_set_bus_width(host, ios->bus_width); break; } /* Let things settle. delay taken from winCE driver */ usleep_range(140, 200); if (PTR_ERR(host->mrq) == -EINTR) dev_dbg(&host->pdev->dev, "%s.%d: IOS interrupted: clk %u, mode %u", current->comm, task_pid_nr(current), ios->clock, ios->power_mode); host->mrq = NULL; host->clk_cache = ios->clock; mutex_unlock(&host->ios_lock); } static int tmio_mmc_get_ro(struct mmc_host *mmc) { struct tmio_mmc_host *host = mmc_priv(mmc); return !(sd_ctrl_read16_and_16_as_32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT); } static int tmio_mmc_get_cd(struct mmc_host *mmc) { struct tmio_mmc_host *host = mmc_priv(mmc); return !!(sd_ctrl_read16_and_16_as_32(host, CTL_STATUS) & TMIO_STAT_SIGSTATE); } static int tmio_multi_io_quirk(struct mmc_card *card, unsigned int direction, int blk_size) { struct tmio_mmc_host *host = mmc_priv(card->host); if (host->multi_io_quirk) return host->multi_io_quirk(card, direction, blk_size); return blk_size; } static struct mmc_host_ops tmio_mmc_ops = { .request = tmio_mmc_request, .set_ios = tmio_mmc_set_ios, .get_ro = tmio_mmc_get_ro, .get_cd = tmio_mmc_get_cd, .enable_sdio_irq = tmio_mmc_enable_sdio_irq, .multi_io_quirk = tmio_multi_io_quirk, }; static int tmio_mmc_init_ocr(struct tmio_mmc_host *host) { struct tmio_mmc_data *pdata = host->pdata; struct mmc_host *mmc = host->mmc; int err; err = mmc_regulator_get_supply(mmc); if (err) return err; /* use ocr_mask if no regulator */ if (!mmc->ocr_avail) mmc->ocr_avail = pdata->ocr_mask; /* * try again. * There is possibility that regulator has not been probed */ if (!mmc->ocr_avail) return -EPROBE_DEFER; return 0; } static void tmio_mmc_of_parse(struct platform_device *pdev, struct mmc_host *mmc) { const struct device_node *np = pdev->dev.of_node; if (!np) return; /* * DEPRECATED: * For new platforms, please use "disable-wp" instead of * "toshiba,mmc-wrprotect-disable" */ if (of_get_property(np, "toshiba,mmc-wrprotect-disable", NULL)) mmc->caps2 |= MMC_CAP2_NO_WRITE_PROTECT; } struct tmio_mmc_host *tmio_mmc_host_alloc(struct platform_device *pdev, struct tmio_mmc_data *pdata) { struct tmio_mmc_host *host; struct mmc_host *mmc; void __iomem *ctl; int ret; ctl = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(ctl)) return ERR_CAST(ctl); mmc = mmc_alloc_host(sizeof(struct tmio_mmc_host), &pdev->dev); if (!mmc) return ERR_PTR(-ENOMEM); host = mmc_priv(mmc); host->ctl = ctl; host->mmc = mmc; host->pdev = pdev; host->pdata = pdata; host->ops = tmio_mmc_ops; mmc->ops = &host->ops; ret = mmc_of_parse(host->mmc); if (ret) { host = ERR_PTR(ret); goto free; } tmio_mmc_of_parse(pdev, mmc); platform_set_drvdata(pdev, host); return host; free: mmc_free_host(mmc); return host; } EXPORT_SYMBOL_GPL(tmio_mmc_host_alloc); void tmio_mmc_host_free(struct tmio_mmc_host *host) { mmc_free_host(host->mmc); } EXPORT_SYMBOL_GPL(tmio_mmc_host_free); int tmio_mmc_host_probe(struct tmio_mmc_host *_host) { struct platform_device *pdev = _host->pdev; struct tmio_mmc_data *pdata = _host->pdata; struct mmc_host *mmc = _host->mmc; int ret; /* * Check the sanity of mmc->f_min to prevent host->set_clock() from * looping forever... */ if (mmc->f_min == 0) return -EINVAL; if (!(pdata->flags & TMIO_MMC_HAS_IDLE_WAIT)) _host->write16_hook = NULL; _host->set_pwr = pdata->set_pwr; ret = tmio_mmc_init_ocr(_host); if (ret < 0) return ret; /* * Look for a card detect GPIO, if it fails with anything * else than a probe deferral, just live without it. */ ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0); if (ret == -EPROBE_DEFER) return ret; mmc->caps |= MMC_CAP_4_BIT_DATA | pdata->capabilities; mmc->caps2 |= pdata->capabilities2; mmc->max_segs = pdata->max_segs ? : 32; mmc->max_blk_size = TMIO_MAX_BLK_SIZE; mmc->max_blk_count = pdata->max_blk_count ? : (PAGE_SIZE / mmc->max_blk_size) * mmc->max_segs; mmc->max_req_size = min_t(size_t, mmc->max_blk_size * mmc->max_blk_count, dma_max_mapping_size(&pdev->dev)); mmc->max_seg_size = mmc->max_req_size; if (mmc_can_gpio_ro(mmc)) _host->ops.get_ro = mmc_gpio_get_ro; if (mmc_can_gpio_cd(mmc)) _host->ops.get_cd = mmc_gpio_get_cd; _host->native_hotplug = !(mmc_can_gpio_cd(mmc) || mmc->caps & MMC_CAP_NEEDS_POLL || !mmc_card_is_removable(mmc)); /* * On Gen2+, eMMC with NONREMOVABLE currently fails because native * hotplug gets disabled. It seems RuntimePM related yet we need further * research. Since we are planning a PM overhaul anyway, let's enforce * for now the device being active by enabling native hotplug always. */ if (pdata->flags & TMIO_MMC_MIN_RCAR2) _host->native_hotplug = true; /* * While using internal tmio hardware logic for card detection, we need * to ensure it stays powered for it to work. */ if (_host->native_hotplug) pm_runtime_get_noresume(&pdev->dev); _host->sdio_irq_enabled = false; if (pdata->flags & TMIO_MMC_SDIO_IRQ) _host->sdio_irq_mask = TMIO_SDIO_MASK_ALL; _host->set_clock(_host, 0); tmio_mmc_reset(_host); _host->sdcard_irq_mask = sd_ctrl_read16_and_16_as_32(_host, CTL_IRQ_MASK); if (!_host->sdcard_irq_mask_all) _host->sdcard_irq_mask_all = TMIO_MASK_ALL; tmio_mmc_disable_mmc_irqs(_host, _host->sdcard_irq_mask_all); if (_host->native_hotplug) tmio_mmc_enable_mmc_irqs(_host, TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT); spin_lock_init(&_host->lock); mutex_init(&_host->ios_lock); /* Init delayed work for request timeouts */ INIT_DELAYED_WORK(&_host->delayed_reset_work, tmio_mmc_reset_work); INIT_WORK(&_host->done, tmio_mmc_done_work); /* See if we also get DMA */ tmio_mmc_request_dma(_host, pdata); pm_runtime_get_noresume(&pdev->dev); pm_runtime_set_active(&pdev->dev); pm_runtime_set_autosuspend_delay(&pdev->dev, 50); pm_runtime_use_autosuspend(&pdev->dev); pm_runtime_enable(&pdev->dev); ret = mmc_add_host(mmc); if (ret) goto remove_host; dev_pm_qos_expose_latency_limit(&pdev->dev, 100); pm_runtime_put(&pdev->dev); return 0; remove_host: pm_runtime_put_noidle(&pdev->dev); tmio_mmc_host_remove(_host); return ret; } EXPORT_SYMBOL_GPL(tmio_mmc_host_probe); void tmio_mmc_host_remove(struct tmio_mmc_host *host) { struct platform_device *pdev = host->pdev; struct mmc_host *mmc = host->mmc; pm_runtime_get_sync(&pdev->dev); if (host->pdata->flags & TMIO_MMC_SDIO_IRQ) sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0000); dev_pm_qos_hide_latency_limit(&pdev->dev); mmc_remove_host(mmc); cancel_work_sync(&host->done); cancel_delayed_work_sync(&host->delayed_reset_work); tmio_mmc_release_dma(host); tmio_mmc_disable_mmc_irqs(host, host->sdcard_irq_mask_all); if (host->native_hotplug) pm_runtime_put_noidle(&pdev->dev); pm_runtime_disable(&pdev->dev); pm_runtime_dont_use_autosuspend(&pdev->dev); pm_runtime_put_noidle(&pdev->dev); } EXPORT_SYMBOL_GPL(tmio_mmc_host_remove); #ifdef CONFIG_PM static int tmio_mmc_clk_enable(struct tmio_mmc_host *host) { if (!host->clk_enable) return -ENOTSUPP; return host->clk_enable(host); } static void tmio_mmc_clk_disable(struct tmio_mmc_host *host) { if (host->clk_disable) host->clk_disable(host); } int tmio_mmc_host_runtime_suspend(struct device *dev) { struct tmio_mmc_host *host = dev_get_drvdata(dev); tmio_mmc_disable_mmc_irqs(host, host->sdcard_irq_mask_all); if (host->clk_cache) host->set_clock(host, 0); tmio_mmc_clk_disable(host); return 0; } EXPORT_SYMBOL_GPL(tmio_mmc_host_runtime_suspend); int tmio_mmc_host_runtime_resume(struct device *dev) { struct tmio_mmc_host *host = dev_get_drvdata(dev); tmio_mmc_clk_enable(host); tmio_mmc_reset(host); if (host->clk_cache) host->set_clock(host, host->clk_cache); if (host->native_hotplug) tmio_mmc_enable_mmc_irqs(host, TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT); tmio_mmc_enable_dma(host, true); mmc_retune_needed(host->mmc); return 0; } EXPORT_SYMBOL_GPL(tmio_mmc_host_runtime_resume); #endif MODULE_LICENSE("GPL v2");