// SPDX-License-Identifier: GPL-2.0-only /* Copyright Altera Corporation (C) 2014. All rights reserved. * * Adopted from dwmac-sti.c */ #include #include #include #include #include #include #include #include #include "stmmac.h" #include "stmmac_platform.h" #include "altr_tse_pcs.h" #define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII 0x0 #define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII 0x1 #define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII 0x2 #define SYSMGR_EMACGRP_CTRL_PHYSEL_WIDTH 2 #define SYSMGR_EMACGRP_CTRL_PHYSEL_MASK 0x00000003 #define SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK 0x00000010 #define SYSMGR_GEN10_EMACGRP_CTRL_PTP_REF_CLK_MASK 0x00000100 #define SYSMGR_FPGAGRP_MODULE_REG 0x00000028 #define SYSMGR_FPGAGRP_MODULE_EMAC 0x00000004 #define SYSMGR_FPGAINTF_EMAC_REG 0x00000070 #define SYSMGR_FPGAINTF_EMAC_BIT 0x1 #define EMAC_SPLITTER_CTRL_REG 0x0 #define EMAC_SPLITTER_CTRL_SPEED_MASK 0x3 #define EMAC_SPLITTER_CTRL_SPEED_10 0x2 #define EMAC_SPLITTER_CTRL_SPEED_100 0x3 #define EMAC_SPLITTER_CTRL_SPEED_1000 0x0 struct socfpga_dwmac; struct socfpga_dwmac_ops { int (*set_phy_mode)(struct socfpga_dwmac *dwmac_priv); }; struct socfpga_dwmac { u32 reg_offset; u32 reg_shift; struct device *dev; struct regmap *sys_mgr_base_addr; struct reset_control *stmmac_rst; struct reset_control *stmmac_ocp_rst; void __iomem *splitter_base; bool f2h_ptp_ref_clk; struct tse_pcs pcs; const struct socfpga_dwmac_ops *ops; }; static void socfpga_dwmac_fix_mac_speed(void *priv, unsigned int speed) { struct socfpga_dwmac *dwmac = (struct socfpga_dwmac *)priv; void __iomem *splitter_base = dwmac->splitter_base; void __iomem *sgmii_adapter_base = dwmac->pcs.sgmii_adapter_base; struct device *dev = dwmac->dev; struct net_device *ndev = dev_get_drvdata(dev); struct phy_device *phy_dev = ndev->phydev; u32 val; if (sgmii_adapter_base) writew(SGMII_ADAPTER_DISABLE, sgmii_adapter_base + SGMII_ADAPTER_CTRL_REG); if (splitter_base) { val = readl(splitter_base + EMAC_SPLITTER_CTRL_REG); val &= ~EMAC_SPLITTER_CTRL_SPEED_MASK; switch (speed) { case 1000: val |= EMAC_SPLITTER_CTRL_SPEED_1000; break; case 100: val |= EMAC_SPLITTER_CTRL_SPEED_100; break; case 10: val |= EMAC_SPLITTER_CTRL_SPEED_10; break; default: return; } writel(val, splitter_base + EMAC_SPLITTER_CTRL_REG); } if (phy_dev && sgmii_adapter_base) { writew(SGMII_ADAPTER_ENABLE, sgmii_adapter_base + SGMII_ADAPTER_CTRL_REG); tse_pcs_fix_mac_speed(&dwmac->pcs, phy_dev, speed); } } static int socfpga_dwmac_parse_data(struct socfpga_dwmac *dwmac, struct device *dev) { struct device_node *np = dev->of_node; struct regmap *sys_mgr_base_addr; u32 reg_offset, reg_shift; int ret, index; struct device_node *np_splitter = NULL; struct device_node *np_sgmii_adapter = NULL; struct resource res_splitter; struct resource res_tse_pcs; struct resource res_sgmii_adapter; sys_mgr_base_addr = altr_sysmgr_regmap_lookup_by_phandle(np, "altr,sysmgr-syscon"); if (IS_ERR(sys_mgr_base_addr)) { dev_info(dev, "No sysmgr-syscon node found\n"); return PTR_ERR(sys_mgr_base_addr); } ret = of_property_read_u32_index(np, "altr,sysmgr-syscon", 1, ®_offset); if (ret) { dev_info(dev, "Could not read reg_offset from sysmgr-syscon!\n"); return -EINVAL; } ret = of_property_read_u32_index(np, "altr,sysmgr-syscon", 2, ®_shift); if (ret) { dev_info(dev, "Could not read reg_shift from sysmgr-syscon!\n"); return -EINVAL; } dwmac->f2h_ptp_ref_clk = of_property_read_bool(np, "altr,f2h_ptp_ref_clk"); np_splitter = of_parse_phandle(np, "altr,emac-splitter", 0); if (np_splitter) { ret = of_address_to_resource(np_splitter, 0, &res_splitter); of_node_put(np_splitter); if (ret) { dev_info(dev, "Missing emac splitter address\n"); return -EINVAL; } dwmac->splitter_base = devm_ioremap_resource(dev, &res_splitter); if (IS_ERR(dwmac->splitter_base)) { dev_info(dev, "Failed to mapping emac splitter\n"); return PTR_ERR(dwmac->splitter_base); } } np_sgmii_adapter = of_parse_phandle(np, "altr,gmii-to-sgmii-converter", 0); if (np_sgmii_adapter) { index = of_property_match_string(np_sgmii_adapter, "reg-names", "hps_emac_interface_splitter_avalon_slave"); if (index >= 0) { if (of_address_to_resource(np_sgmii_adapter, index, &res_splitter)) { dev_err(dev, "%s: ERROR: missing emac splitter address\n", __func__); ret = -EINVAL; goto err_node_put; } dwmac->splitter_base = devm_ioremap_resource(dev, &res_splitter); if (IS_ERR(dwmac->splitter_base)) { ret = PTR_ERR(dwmac->splitter_base); goto err_node_put; } } index = of_property_match_string(np_sgmii_adapter, "reg-names", "gmii_to_sgmii_adapter_avalon_slave"); if (index >= 0) { if (of_address_to_resource(np_sgmii_adapter, index, &res_sgmii_adapter)) { dev_err(dev, "%s: ERROR: failed mapping adapter\n", __func__); ret = -EINVAL; goto err_node_put; } dwmac->pcs.sgmii_adapter_base = devm_ioremap_resource(dev, &res_sgmii_adapter); if (IS_ERR(dwmac->pcs.sgmii_adapter_base)) { ret = PTR_ERR(dwmac->pcs.sgmii_adapter_base); goto err_node_put; } } index = of_property_match_string(np_sgmii_adapter, "reg-names", "eth_tse_control_port"); if (index >= 0) { if (of_address_to_resource(np_sgmii_adapter, index, &res_tse_pcs)) { dev_err(dev, "%s: ERROR: failed mapping tse control port\n", __func__); ret = -EINVAL; goto err_node_put; } dwmac->pcs.tse_pcs_base = devm_ioremap_resource(dev, &res_tse_pcs); if (IS_ERR(dwmac->pcs.tse_pcs_base)) { ret = PTR_ERR(dwmac->pcs.tse_pcs_base); goto err_node_put; } } } dwmac->reg_offset = reg_offset; dwmac->reg_shift = reg_shift; dwmac->sys_mgr_base_addr = sys_mgr_base_addr; dwmac->dev = dev; of_node_put(np_sgmii_adapter); return 0; err_node_put: of_node_put(np_sgmii_adapter); return ret; } static int socfpga_get_plat_phymode(struct socfpga_dwmac *dwmac) { struct net_device *ndev = dev_get_drvdata(dwmac->dev); struct stmmac_priv *priv = netdev_priv(ndev); return priv->plat->interface; } static int socfpga_set_phy_mode_common(int phymode, u32 *val) { switch (phymode) { case PHY_INTERFACE_MODE_RGMII: case PHY_INTERFACE_MODE_RGMII_ID: case PHY_INTERFACE_MODE_RGMII_RXID: case PHY_INTERFACE_MODE_RGMII_TXID: *val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII; break; case PHY_INTERFACE_MODE_MII: case PHY_INTERFACE_MODE_GMII: case PHY_INTERFACE_MODE_SGMII: *val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII; break; case PHY_INTERFACE_MODE_RMII: *val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII; break; default: return -EINVAL; } return 0; } static int socfpga_gen5_set_phy_mode(struct socfpga_dwmac *dwmac) { struct regmap *sys_mgr_base_addr = dwmac->sys_mgr_base_addr; int phymode = socfpga_get_plat_phymode(dwmac); u32 reg_offset = dwmac->reg_offset; u32 reg_shift = dwmac->reg_shift; u32 ctrl, val, module; if (socfpga_set_phy_mode_common(phymode, &val)) { dev_err(dwmac->dev, "bad phy mode %d\n", phymode); return -EINVAL; } /* Overwrite val to GMII if splitter core is enabled. The phymode here * is the actual phy mode on phy hardware, but phy interface from * EMAC core is GMII. */ if (dwmac->splitter_base) val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII; /* Assert reset to the enet controller before changing the phy mode */ reset_control_assert(dwmac->stmmac_ocp_rst); reset_control_assert(dwmac->stmmac_rst); regmap_read(sys_mgr_base_addr, reg_offset, &ctrl); ctrl &= ~(SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << reg_shift); ctrl |= val << reg_shift; if (dwmac->f2h_ptp_ref_clk || phymode == PHY_INTERFACE_MODE_MII || phymode == PHY_INTERFACE_MODE_GMII || phymode == PHY_INTERFACE_MODE_SGMII) { regmap_read(sys_mgr_base_addr, SYSMGR_FPGAGRP_MODULE_REG, &module); module |= (SYSMGR_FPGAGRP_MODULE_EMAC << (reg_shift / 2)); regmap_write(sys_mgr_base_addr, SYSMGR_FPGAGRP_MODULE_REG, module); } if (dwmac->f2h_ptp_ref_clk) ctrl |= SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK << (reg_shift / 2); else ctrl &= ~(SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK << (reg_shift / 2)); regmap_write(sys_mgr_base_addr, reg_offset, ctrl); /* Deassert reset for the phy configuration to be sampled by * the enet controller, and operation to start in requested mode */ reset_control_deassert(dwmac->stmmac_ocp_rst); reset_control_deassert(dwmac->stmmac_rst); if (phymode == PHY_INTERFACE_MODE_SGMII) { if (tse_pcs_init(dwmac->pcs.tse_pcs_base, &dwmac->pcs) != 0) { dev_err(dwmac->dev, "Unable to initialize TSE PCS"); return -EINVAL; } } return 0; } static int socfpga_gen10_set_phy_mode(struct socfpga_dwmac *dwmac) { struct regmap *sys_mgr_base_addr = dwmac->sys_mgr_base_addr; int phymode = socfpga_get_plat_phymode(dwmac); u32 reg_offset = dwmac->reg_offset; u32 reg_shift = dwmac->reg_shift; u32 ctrl, val, module; if (socfpga_set_phy_mode_common(phymode, &val)) return -EINVAL; /* Overwrite val to GMII if splitter core is enabled. The phymode here * is the actual phy mode on phy hardware, but phy interface from * EMAC core is GMII. */ if (dwmac->splitter_base) val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII; /* Assert reset to the enet controller before changing the phy mode */ reset_control_assert(dwmac->stmmac_ocp_rst); reset_control_assert(dwmac->stmmac_rst); regmap_read(sys_mgr_base_addr, reg_offset, &ctrl); ctrl &= ~(SYSMGR_EMACGRP_CTRL_PHYSEL_MASK); ctrl |= val; if (dwmac->f2h_ptp_ref_clk || phymode == PHY_INTERFACE_MODE_MII || phymode == PHY_INTERFACE_MODE_GMII || phymode == PHY_INTERFACE_MODE_SGMII) { ctrl |= SYSMGR_GEN10_EMACGRP_CTRL_PTP_REF_CLK_MASK; regmap_read(sys_mgr_base_addr, SYSMGR_FPGAINTF_EMAC_REG, &module); module |= (SYSMGR_FPGAINTF_EMAC_BIT << reg_shift); regmap_write(sys_mgr_base_addr, SYSMGR_FPGAINTF_EMAC_REG, module); } else { ctrl &= ~SYSMGR_GEN10_EMACGRP_CTRL_PTP_REF_CLK_MASK; } regmap_write(sys_mgr_base_addr, reg_offset, ctrl); /* Deassert reset for the phy configuration to be sampled by * the enet controller, and operation to start in requested mode */ reset_control_deassert(dwmac->stmmac_ocp_rst); reset_control_deassert(dwmac->stmmac_rst); if (phymode == PHY_INTERFACE_MODE_SGMII) { if (tse_pcs_init(dwmac->pcs.tse_pcs_base, &dwmac->pcs) != 0) { dev_err(dwmac->dev, "Unable to initialize TSE PCS"); return -EINVAL; } } return 0; } static int socfpga_dwmac_probe(struct platform_device *pdev) { struct plat_stmmacenet_data *plat_dat; struct stmmac_resources stmmac_res; struct device *dev = &pdev->dev; int ret; struct socfpga_dwmac *dwmac; struct net_device *ndev; struct stmmac_priv *stpriv; const struct socfpga_dwmac_ops *ops; ops = device_get_match_data(&pdev->dev); if (!ops) { dev_err(&pdev->dev, "no of match data provided\n"); return -EINVAL; } ret = stmmac_get_platform_resources(pdev, &stmmac_res); if (ret) return ret; plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac); if (IS_ERR(plat_dat)) return PTR_ERR(plat_dat); dwmac = devm_kzalloc(dev, sizeof(*dwmac), GFP_KERNEL); if (!dwmac) { ret = -ENOMEM; goto err_remove_config_dt; } dwmac->stmmac_ocp_rst = devm_reset_control_get_optional(dev, "stmmaceth-ocp"); if (IS_ERR(dwmac->stmmac_ocp_rst)) { ret = PTR_ERR(dwmac->stmmac_ocp_rst); dev_err(dev, "error getting reset control of ocp %d\n", ret); goto err_remove_config_dt; } reset_control_deassert(dwmac->stmmac_ocp_rst); ret = socfpga_dwmac_parse_data(dwmac, dev); if (ret) { dev_err(dev, "Unable to parse OF data\n"); goto err_remove_config_dt; } dwmac->ops = ops; plat_dat->bsp_priv = dwmac; plat_dat->fix_mac_speed = socfpga_dwmac_fix_mac_speed; ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res); if (ret) goto err_remove_config_dt; ndev = platform_get_drvdata(pdev); stpriv = netdev_priv(ndev); /* The socfpga driver needs to control the stmmac reset to set the phy * mode. Create a copy of the core reset handle so it can be used by * the driver later. */ dwmac->stmmac_rst = stpriv->plat->stmmac_rst; ret = ops->set_phy_mode(dwmac); if (ret) goto err_dvr_remove; return 0; err_dvr_remove: stmmac_dvr_remove(&pdev->dev); err_remove_config_dt: stmmac_remove_config_dt(pdev, plat_dat); return ret; } #ifdef CONFIG_PM_SLEEP static int socfpga_dwmac_resume(struct device *dev) { struct net_device *ndev = dev_get_drvdata(dev); struct stmmac_priv *priv = netdev_priv(ndev); struct socfpga_dwmac *dwmac_priv = get_stmmac_bsp_priv(dev); dwmac_priv->ops->set_phy_mode(priv->plat->bsp_priv); /* Before the enet controller is suspended, the phy is suspended. * This causes the phy clock to be gated. The enet controller is * resumed before the phy, so the clock is still gated "off" when * the enet controller is resumed. This code makes sure the phy * is "resumed" before reinitializing the enet controller since * the enet controller depends on an active phy clock to complete * a DMA reset. A DMA reset will "time out" if executed * with no phy clock input on the Synopsys enet controller. * Verified through Synopsys Case #8000711656. * * Note that the phy clock is also gated when the phy is isolated. * Phy "suspend" and "isolate" controls are located in phy basic * control register 0, and can be modified by the phy driver * framework. */ if (ndev->phydev) phy_resume(ndev->phydev); return stmmac_resume(dev); } #endif /* CONFIG_PM_SLEEP */ static int __maybe_unused socfpga_dwmac_runtime_suspend(struct device *dev) { struct net_device *ndev = dev_get_drvdata(dev); struct stmmac_priv *priv = netdev_priv(ndev); stmmac_bus_clks_config(priv, false); return 0; } static int __maybe_unused socfpga_dwmac_runtime_resume(struct device *dev) { struct net_device *ndev = dev_get_drvdata(dev); struct stmmac_priv *priv = netdev_priv(ndev); return stmmac_bus_clks_config(priv, true); } static const struct dev_pm_ops socfpga_dwmac_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(stmmac_suspend, socfpga_dwmac_resume) SET_RUNTIME_PM_OPS(socfpga_dwmac_runtime_suspend, socfpga_dwmac_runtime_resume, NULL) }; static const struct socfpga_dwmac_ops socfpga_gen5_ops = { .set_phy_mode = socfpga_gen5_set_phy_mode, }; static const struct socfpga_dwmac_ops socfpga_gen10_ops = { .set_phy_mode = socfpga_gen10_set_phy_mode, }; static const struct of_device_id socfpga_dwmac_match[] = { { .compatible = "altr,socfpga-stmmac", .data = &socfpga_gen5_ops }, { .compatible = "altr,socfpga-stmmac-a10-s10", .data = &socfpga_gen10_ops }, { } }; MODULE_DEVICE_TABLE(of, socfpga_dwmac_match); static struct platform_driver socfpga_dwmac_driver = { .probe = socfpga_dwmac_probe, .remove = stmmac_pltfr_remove, .driver = { .name = "socfpga-dwmac", .pm = &socfpga_dwmac_pm_ops, .of_match_table = socfpga_dwmac_match, }, }; module_platform_driver(socfpga_dwmac_driver); MODULE_LICENSE("GPL v2");